WorldWideScience

Sample records for technological improvements brought

  1. Research on spatial features of streets under the influence of immersion communication technology brought by new media

    Science.gov (United States)

    Xu, Hua-wei; Feng, Chen

    2017-04-01

    The rapid development of new media has exacerbated the complexity of urban street space’s information interaction. With the influence of the immersion communication, the streetscape has constructed a special scene like ‘media convergence’, which has brought a huge challenge for maintaining the urban streetscape order. The Spatial Visual Communication Research Method which should break the limitation of the traditional aesthetic space research, can provide a brand new prospect for this phenomenon research. This study aims to analyze and summarize the communication characteristics of new media and its context, which will be helpful for understanding the social meaning within the order change of the street’s spatial and physical environment.

  2. Remarkable Improvement in the Mechanical Properties and CO2 Uptake of MOFs Brought About by Covalent Linking to Graphene.

    Science.gov (United States)

    Kumar, Ram; Raut, Devaraj; Ramamurty, Upadrasta; Rao, C N R

    2016-06-27

    Metal-organic frameworks (MOFs) are exceptional as gas adsorbents but their mechanical properties are poor. We present a successful strategy to improve the mechanical properties along with gas adsorption characteristics, wherein graphene (Gr) is covalently bonded with M/DOBDC (M=Mg(2+) , Ni(2+) , or Co(2+) , DOBDC=2,5-dioxido-1,4-benzene dicarboxylate) MOFs. The surface area of the graphene-MOF composites increases up to 200-300 m(2)  g(-1) whereas the CO2 uptake increases by ca. 3-5 wt % at 0.15 atm and by 6-10 wt % at 1 atm. What is significant is that the composites exhibit improved mechanical properties. In the case of Mg/DOBDC, a three-fold increase in both the elastic modulus and hardness with 5 wt % graphene reinforcement is observed. Improvement in both the mechanical properties and gas adsorption characteristics of porous MOFs on linking them to graphene is a novel observation and suggests a new avenue for the design and synthesis of porous materials.

  3. Significant improvement in the pore properties of SBA-15 brought about by carboxylic acids and hydrothermal treatment

    Indian Academy of Sciences (India)

    Milan Kanti Naskar; M Eswaramoorthy

    2008-01-01

    A comparative study of the pore properties of SBA-15 samples prepared under nonhydrothermal and hydrothermal conditions, in the absence and presence of carboxylic acids such as succinic, tartaric and citric acids has been carried out. In the absence of carboxylic acid, flake-like and spheroid particles were generally obtained irrespective of the preparative procedures. On the other hand, stirring of the pre-mix induces a rod-like morphology in presence of carboxylic acids. The samples prepared under non-hydrothermal conditions exhibit a higher degree of silicate condensation compared to those synthesized under hydrothermal conditions. SBA-15 samples prepared under hydrothermal conditions show higher values of the d (100) spacing independent of the presence of carboxylic acids. Presence of carboxylic acids as well as hydrothermal treatment improves the pore properties of SBA-15.

  4. Great Taste, Less Waste: A cluster-randomized trial using a communications campaign to improve the quality of foods brought from home to school by elementary school children

    Science.gov (United States)

    Goldberg, Jeanne P.; Folta, Sara C.; Eliasziw, Misha; Koch-Weser, Susan; Economos, Christina D.; Hubbard, Kristie L.; Peterson, Lindsay A.; Wright, Catherine M.; Must, Aviva

    2015-01-01

    Objective Great Taste, Less Waste (GTLW), a communications campaign, capitalized on the synergy between healthy eating and eco-friendly behaviors to motivate children to bring more fruits and vegetables and fewer sugar-sweetened beverages (SSBs) to school. Methods A cluster-randomized trial in Eastern Massachusetts elementary schools in 2011–2012 tested the hypothesis that GTLW would improve the quality of foods from home more than a nutrition-only campaign – Foods 2 Choose (F2C) – or control. Lunch and snack items from home were measured at baseline and 7 months later using digital photography. Mixed linear models compared change in mean servings of fruits, vegetables, and SSBs among groups, and change in mean prevalence of packaging type. Change in prevalence of food items of interest was compared among groups using generalized linear models. Results 582 third and fourth graders from 82 classrooms in 12 schools participated. At follow-up, no significant differences were observed between groups in change in mean servings or change in prevalence of items of interest. No packaging differences were observed. Conclusion GTLW was well-received but no significant changes were observed in the quality of food brought to school. Whether classrooms are an effective environment for change remains to be explored. PMID:25735605

  5. Improved hyperspectral imaging technologies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Improved hyperspectral imaging technologies could enable lower-cost analysis for planetary science including atmospheric studies, mineralogical investigations, and...

  6. The Opportunities and Challenges Brought about by RFID(Radio Frequency Identification Devices) Technology to ILAS(Integrated Library Automation System)%RFID技术带给ILAS的机遇与挑战

    Institute of Scientific and Technical Information of China (English)

    廖佳杰; 张丽; 王惠芳

    2015-01-01

    面对RFID技术带来的机遇与挑战,图书馆自动化集成系统(ILAS)开发商应主动实施基于RFID技术的应用开发,不能只是简单地应用RFID标签来取代条形码,而应在RFID技术基础上,创建全新的应用理念和业务模式,赋予ILAS智能化的内涵,充分利用RFID技术为图书馆信息化建设提供一个全新的手段。介绍了ILAS与RFID系统的应用现状,阐述了RFID技术带给ILAS的机遇与挑战。%Facing the opportunities and challenges brought about by the RFID technology, ILAS developers should actively implement the application development based on RFID technology, shouldn’t simply use RFID tags to replace the barcode, and should create a bran-new application concept and service mode based on RFID technology, give the intelligent connotation of ILAS, and provide a totally new method for library’s information construction by making full use of the RFID technology. This paper introduces the application status of ILAS and RFID system, and expounds the opportunities and challenges brought about by RFID technology to ILAS.

  7. 图书馆如何应对信息技术发展带来的机会与挑战%Discussion on How Libraries Confront Opportunities and Challenges Brought by Information Technologies

    Institute of Scientific and Technical Information of China (English)

    杨楠; 秦小燕; 沈蓉蓉; 高雪青

    2012-01-01

    Rapid development of new technologies brings great development opportunities and unorecedented challenges to libraries. Librarians shuould get advantages and avoid disadvantages, provide readers convenience library services with new technologies, adjust the attitude to keep up with the pace of information technology development, coordinate the relationship between speed and quality, and confront challenges brought by information technologies.%新技术的发展给图书馆带来了极好的发展机遇和前所未有的冲击。图书馆人应趋利避害,让读者充分享受新技术带来的便利服务,调整心态跟上技术发展的步伐,协调好速度与质量的关系,积极应对信息技术发展带来的挑战。

  8. IMPROVED ROOF STABILIZATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Ebadian, Ph.D.

    1999-01-01

    Many U.S. Department of Energy (DOE) remediation sites have performed roof repair and roof replacement to stabilize facilities prior to performing deactivation and decommissioning (D&D) activities. This project will review the decision criteria used by these DOE sites, along with the type of repair system used for each different roof type. Based on this information, along with that compiled from roofing experts, a decision-making tool will be generated to aid in selecting the proper roof repair systems. Where appropriate, innovative technologies will be reviewed and applied to the decision-making tool to determine their applicability. Based on the results, applied research and development will be conducted to develop a method to repair these existing roofing systems, while providing protection for the D and D worker in a cost-efficient manner.

  9. Improving Technology and Engineering Education

    Science.gov (United States)

    Tech Directions, 2013

    2013-01-01

    Improving Technology and Engineering Education for All Students: A Plan of Action is the theme of this year's International Technology and Engineering Educators Association (ITEEA) annual conference, which meets March 7-9 in Columbus, OH. The theme is aligned with ITEEA's 2012-15 Strategic Plan: Investing in People as Educational Change Agents.…

  10. Challenge Brought by Brain Imaging Technology for the Judgment of Moral Responsibility%脑成像技术对道德责任判定的挑战

    Institute of Scientific and Technical Information of China (English)

    毛新志; 刘星

    2011-01-01

    The judgment of moral responsibility was based on the existence of free will and the consequence of the action.However, brain imaging technology indicates the real free will does not really exist.Emotions and memory play an important role in moral judgments, and sometimes a decisive role.Therefore, for the moral evaluation,free will is not a reasonable prerequisite and the consequence of the action not a reliable basis, all of which raise a great challenge for the traditional criteria of judging moral responsibility.%道德责任评判以自由意志的存在为前提,以行动的后果为依据.然而,脑成像技术的发展表明真正的自由意志是不存在的,情感以及记忆在道德判断中扮演了重要角色,有时甚至起决定性作用.因此,自由意志并非道德责任判定的合理前提,行动的直接后果也并非道德责任评判的可靠依据,这给传统道德责任判定提出了极大的挑战.

  11. Technology improves upper extremity rehabilitation.

    Science.gov (United States)

    Kowalczewski, Jan; Prochazka, Arthur

    2011-01-01

    Stroke survivors with hemiparesis and spinal cord injury (SCI) survivors with tetraplegia find it difficult or impossible to perform many activities of daily life. There is growing evidence that intensive exercise therapy, especially when supplemented with functional electrical stimulation (FES), can improve upper extremity function, but delivering the treatment can be costly, particularly after recipients leave rehabilitation facilities. Recently, there has been a growing level of interest among researchers and healthcare policymakers to deliver upper extremity treatments to people in their homes using in-home teletherapy (IHT). The few studies that have been carried out so far have encountered a variety of logistical and technical problems, not least the difficulty of conducting properly controlled and blinded protocols that satisfy the requirements of high-level evidence-based research. In most cases, the equipment and communications technology were not designed for individuals with upper extremity disability. It is clear that exercise therapy combined with interventions such as FES, supervised over the Internet, will soon be adopted worldwide in one form or another. Therefore it is timely that researchers, clinicians, and healthcare planners interested in assessing IHT be aware of the pros and cons of the new technology and the factors involved in designing appropriate studies of it. It is crucial to understand the technical barriers, the role of telesupervisors, the motor improvements that participants can reasonably expect and the process of optimizing IHT-exercise therapy protocols to maximize the benefits of the emerging technology.

  12. Chalenges and opportunities brought by foreign direct investments in Brazil

    Directory of Open Access Journals (Sweden)

    Eveline Barbosa Silva Carvalho

    2008-01-01

    Full Text Available This paper analyzes the challenges and opportunities brought by foreign direct investment in general and in Brazil particularly. The study is based on literature review and statistical data show that foreign direct investments have important effects on the business environment of the host country as they bring productivity improvement, formal employment and income generation, increase on the export level, establishment of firms with high innovation standards and the capacity to improve the quality of national products, with some degree of technology diffusion, increases in the network of suppliers and possible buyers, and the introduction of new strategies of business management, logistics as well as other ways of modernizing industrial structures. It concludes that the major benefits from foreign direct investments are the change on local companies strategies. The study also shows that investments are concentrated on most developed areas and that there is no specific strategy for investment attraction to the less economically favored areas of Brazil.

  13. CHALENGES AND OPPORTUNITIES BROUGHT BY FOREIGN DIRECT INVESTMENTS IN BRAZIL

    Directory of Open Access Journals (Sweden)

    EVELINE BARBOSA

    2006-01-01

    Full Text Available This paper analyzes the challenges and opportunities brought by foreign directinvestment in general and in Brazil particularly. The study is based on literature review andstatistical data show that foreign direct investments have important effects on the businessenvironment of the host country as they bring productivity improvement, formal employmentand income generation, increase on the export level, establishment of firms with highinnovation standards and the capacity to improve the quality of national products, with somedegree of technology diffusion, increases in the network of suppliers and possible buyers, andthe introduction of new strategies of business management, logistics as well as other ways ofmodernizing industrial structures. It concludes that the major benefits from foreign directinvestments are the change on local companies strategies. The study also shows thatinvestments are concentrated on most developed areas and that there is no specific strategy forinvestment attraction to the less economically favored areas of Brazil

  14. Improving Technology in Agriscience Classrooms

    Science.gov (United States)

    Morris, Krista

    2014-01-01

    Teachers must make persistent efforts in integrating technology in the classroom. In Georgia agriscience curriculum, no data are available regarding the type and amount of technology integration used in the classrooms. Some teachers integrate actively while others incorporate very little technology in their teaching. The purpose of this…

  15. Accelerating the transfer of improved production technologies ...

    African Journals Online (AJOL)

    Accelerating the transfer of improved production technologies: controlling African cassava mosaic ... African Crop Science Journal ... A national network of cassava workers (NANEC) was created to address the problem of technology transfer.

  16. MIRAGE emitter improvements & technology review

    Science.gov (United States)

    Solomon, Steven L.; Irwin, Alan; Oleson, Jim; Sparkman, Kevin; Gallagher, Anthony M.; Lin, William; Pan, Jianmei

    2001-08-01

    With the increased demand for IR sensor and surveillance systems, there is a growing need for technologies to support their operational readiness. Measurement of sensor characteristics such as sensitivity, MRTD, and dynamic range should be standard in all mission critical systems. The Real-Time Infrared Test Set (RTIR) is a portable system designed to provide in-the-field calibration and testing of IR imaging systems and seekers. RTIR uses the high volume manufacturing processes of the Very Large Scale Integration (VLSI) and the Micro Electromechanical Systems (MEMS) technology to produce a Thermal Pixel Array (TPA). State-of-the-art CMOS processes define all the necessary on-chip digital and analog electronics. When properly driven, this array generates variable temperature,synthetic IR scenes. A nonuniformity measurement of several TPAs is presented.

  17. The Ways Metaphor is Brought into Vocabulary Teaching

    Institute of Scientific and Technical Information of China (English)

    LiuYan; ShenXiang jing

    2014-01-01

    The purpose of vocabulary teaching in English is to enlarge breadth and depth of vocabulary and From the point of cognitive metaphor, meaning extension of vocabulary contributes a lot to the vocabulary teaching. The paper tries to sum up ways metaphor is brought into teaching as a means of improving English teaching.

  18. The Ways Metaphor is Brought into Vocabulary Teaching

    Institute of Scientific and Technical Information of China (English)

    LiuYan; ShenXiang; jing

    2014-01-01

    The purpose of vocabulary teaching in English is to enlarge breadth and depth of vocabulary and From the point of cognitive metaphor,meaning extension of vocabulary contributes a lot to the vocabulary teaching.The paper tries to sum up ways metaphor is brought into teaching as a means of improving English teaching.

  19. Mobile technology: streamlining practice and improving care

    OpenAIRE

    Blake, Holly

    2013-01-01

    The use of mobile phones in care delivery has the potential to improve the way in which care is delivered. When implemented effectively, mobile technologies can empower patients and enhance communication between patients and their health-care providers. When barriers are recognised and addressed, mobile technologies can change working lives, facilitating rapid access to information and supporting efficiency in practice.

  20. Improving NASA's technology for space science

    Science.gov (United States)

    1993-01-01

    The continued advance of the nation's space program is directly dependent upon the development and use of new technology. Technology is the foundation for every aspect of space missions and ground operations. The improvements in technology that will enable future advances are not only in device and system performance, but also in permitting missions to be carried out more rapidly and at lower cost. Although more can be done with current technology, NASA's recent call for new and innovative approaches should not be answered by employing only today's technologies; new technologies with revolutionary potential should be sought. The study reported here was performed to identify means to enhance the development of technologies for the space sciences and applications.

  1. Quality Measures for Improving Technology Trees

    Directory of Open Access Journals (Sweden)

    Teemu J. Heinimäki

    2015-01-01

    Full Text Available The quality of technology trees in digital games can be improved by adjusting their structural and quantitative properties. Therefore, there is a demand for recognizing and measuring such properties. Part of the process can be automated; there are properties measurable by computers, and analyses based on the results (and visualizations of them may help to produce significantly better technology trees, even practically without extra workload for humans. In this paper, we introduce useful technology tree properties and novel measuring features implemented into our software tool for manipulating technology trees.

  2. Using technology to improve adolescent healthcare.

    Science.gov (United States)

    Hassan, Areej; Fleegler, Eric W

    2010-08-01

    To provide an overview of current technologies available for use in a primary healthcare setting, common indications for their use, and their effects on clinical practice. Technologies such as the internet and cell phones are an integral part of the daily lives of most adolescents. Many young people are comfortable using technology as part of their healthcare visits, especially when addressing sensitive issues. Over the past 5 years, a significant body of research has emerged introducing a variety of technologic modalities that screen for health-risk behaviors, educate patients about chronic diseases, promote preventive efforts, and provide interventions in the adolescent population. Findings suggest that integrating technology with clinical practice can improve quality of patient care. Technology can be used as an effective medium for the delivery of health information and interventions in an efficient, organized, and effective manner. Sharing knowledge of innovative tools, systems and programs will help develop further interventions and strategies to ensure optimal healthcare in young people.

  3. A Vision for a Summit: CELT Recently Brought Together School Districts, Vendors and Professional Organizations for a National Summit on "Leadership, Learning and Technology for the 21st Century"

    Science.gov (United States)

    Ramsay, Priscilla; Milton, Kenneth

    2004-01-01

    A lunch-time discussion among CELT (Center for Education Leadership and Technology) Corporation staff about how to positively impact the 2004 presidential campaign quickly evolved into a vision for bringing together top executive-level practitioners in education for a national summit on "Leadership, Learning and Technology for the 21st Century."…

  4. Can Technology Improve the Quality of Colonoscopy?

    Science.gov (United States)

    Thirumurthi, Selvi; Ross, William A; Raju, Gottumukkala S

    2016-07-01

    In order for screening colonoscopy to be an effective tool in reducing colon cancer incidence, exams must be performed in a high-quality manner. Quality metrics have been presented by gastroenterology societies and now include higher adenoma detection rate targets than in the past. In many cases, the quality of colonoscopy can often be improved with simple low-cost interventions such as improved procedure technique, implementing split-dose bowel prep, and monitoring individuals' performances. Emerging technology has expanded our field of view and image quality during colonoscopy. We will critically review several technological advances in the context of quality metrics and discuss if technology can really improve the quality of colonoscopy.

  5. REPAIR TECHNOLOGY IMPROVEMENT OF SPECIALIZED FREIGHT CARS

    Directory of Open Access Journals (Sweden)

    V. M. Bubnov

    2016-02-01

    Full Text Available Purpose. The volume of cargo transportation demands the introduction of a new generation of cars that would be able to provide all the needs of carriers. But this is impossible without the implementation of renovation repair facilities with the introduction of new technologies and modernization of the repair process. Repair of rolling stock is a key factor that must proceed with the establishment of new cars, as not all of the inventions may be repaired in car-repair depots, most of which are obsolete. The purpose is to analyze the possibility of increasing the efficiency of the repair process by introducing new repair technologies or improving the existing ones. It will improve not only the quality of the repair, but also its rate. Methodology. Works on improving the designs of freight cars are held by many design organizations in almost all industrialized countries. It makes repair organizations (depots and car-repair plants to upgrade the repair process. Achievements of-this goal is possible by improving the technology renovation and reorganization through the use of flexible flow technologies, which to date are the most effective in the repair of rolling stock. Findings. When performing the analysis it was determined that there are different designs of cars. More of cars are all-purpose and their repair does not cause difficulties for car-repair business. However, the number of specialized cars is also significant, and the technology of their repair should be improved. One of the reasons is that many models, such as tank wagons for the carriage of sulfur, are intended for the carriage of dangerous goods and their failure at the time of motion is not permitted. Originality. Firstly the authors have defined direction at improving technologies of repair specialized cars. Practical value. Actual improvement in the construction of cars is to improve the existing repair facilities. In addition, the repair technology using nowadays when repairing

  6. Improving transient analysis technology for aircraft structures

    Science.gov (United States)

    Melosh, R. J.; Chargin, Mladen

    1989-01-01

    Aircraft dynamic analyses are demanding of computer simulation capabilities. The modeling complexities of semi-monocoque construction, irregular geometry, high-performance materials, and high-accuracy analysis are present. At issue are the safety of the passengers and the integrity of the structure for a wide variety of flight-operating and emergency conditions. The technology which supports engineering of aircraft structures using computer simulation is examined. Available computer support is briefly described and improvement of accuracy and efficiency are recommended. Improved accuracy of simulation will lead to a more economical structure. Improved efficiency will result in lowering development time and expense.

  7. Opportunities and Challenges of University Library Service Brought by Mobile Technology Changes%移动技术的变革给高校图书馆读者服务带来的机遇和挑战

    Institute of Scientific and Technical Information of China (English)

    李双双

    2015-01-01

    With the popularity of modern communications and electronic equipment, mobile technology in people's lives and work more and more applications, it brings new opportunities and challenges to college library service mode. This article will first analyze the characteristics and advantages of mobile technology, and then sort the problem in the application of mo-bile technology encountered during the university library service activities, measures to move the final analysis techniques you need service opportunities and technology, hoping to to provide theoretical and practical inspiration for the construction of the relevant university library.%随着现代通信和电子设备的普及,移动技术在人们生活和工作中的应用也越来越多,这给高校图书馆读者服务模式带来了新的机遇和挑战。本文将首先分析移动技术的特点及优势,然后梳理在应用移动技术过程中高校图书馆服务活动所遇到的问题,最后分析移动技术为读者服务所带来的机遇及技术的应用措施,希望可以为相关高校图书馆的建设提供一定的理论和实践启示。

  8. Can technology improve alignment during knee arthroplasty.

    Science.gov (United States)

    Thienpont, Emmanuel; Fennema, Peter; Price, Andrew

    2013-09-01

    Component malalignment remains a concern in total knee arthroplasty (TKA); therefore, a series of technologies have been developed to improve alignment. The authors conducted a systematic review to compare computer-assisted navigation with conventional instrumentation, and assess the current evidence for patient-matched instrumentation and robot-assisted implantation. An extensive search of the PubMed database for relevant meta-analyses, systematic reviews and original articles was performed, with each study scrutinised by two reviewers. Data on study characteristics and outcomes were extracted from each study and compared. In total 30 studies were included: 10 meta-analyses comparing computer-assisted navigation and conventional instrumentation, 13 studies examining patient-matched instrumentation, and seven investigating robot-assisted implantation. Computer-assisted navigation showed significant and reproducible improvements in mechanical alignment over conventional instrumentation. Patient-matched instrumentation appeared to achieve a high degree of mechanical alignment, although the majority of studies were of poor quality. The data for robot-assisted surgery was less indicative. Computer-assisted navigation improves alignment during TKA over conventional instrumentation. For patient-matched instrumentation and robot-assisted implantation, alignment benefits have not been reliably demonstrated. For all three technologies, clinical benefits cannot currently be assumed, and further studies are required. Although current technologies to improve alignment during TKA appear to result in intra-operative benefits, their clinical impact remains unclear, and surgeons should take this into account when considering their adoption.

  9. IMPROVING HOSPITAL LOGISTICS BY RETHINKING TECHNOLOGY ASSESSMENT

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Jørgensen, Pelle Morten Thomas

    2011-01-01

    In order to cope with the future challenges of the health care sector, there is an urging need for improving efficiency at hospitals. The study presents a framework enabling health care managers of improving the in-house logistics. The distinctiveness of the framework is the way in which it relates...... technology, logistics, structure and procedures to efficiency. Changing one factor e.g. technology, initiates an iterative loop focusing on change in the related factors in order to obtain the optimal efficiency. The search for an optimal efficient solution is the driving force of the framework...... at a Danish hospital. The framework is tested on the blood sample logistics between the emergency department and laboratory with the goal of enhancing the efficiency of the emergency department....

  10. NEW POSSIBILITIES BROUGHT ABOUT BY HYPERTEXT

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper explores the new possibilities of the novel in the context of technologies of computer hypertext. One of the central argmnents of the paper is that the operational logic of the novel can be made to approximate that of a web of hypertext links. The author also argues that the hope of the renaissance of the novel Iies in the technologically enhanced speed of the traffic in models between smooth space and striated space.

  11. Software productivity improvement through software engineering technology

    Science.gov (United States)

    Mcgarry, F. E.

    1985-01-01

    It has been estimated that NASA expends anywhere from 6 to 10 percent of its annual budget on the acquisition, implementation and maintenance of computer software. Although researchers have produced numerous software engineering approaches over the past 5-10 years; each claiming to be more effective than the other, there is very limited quantitative information verifying the measurable impact htat any of these technologies may have in a production environment. At NASA/GSFC, an extended research effort aimed at identifying and measuring software techniques that favorably impact productivity of software development, has been active over the past 8 years. Specific, measurable, software development technologies have been applied and measured in a production environment. Resulting software development approaches have been shown to be effective in both improving quality as well as productivity in this one environment.

  12. Improving student retention in computer engineering technology

    Science.gov (United States)

    Pierozinski, Russell Ivan

    The purpose of this research project was to improve student retention in the Computer Engineering Technology program at the Northern Alberta Institute of Technology by reducing the number of dropouts and increasing the graduation rate. This action research project utilized a mixed methods approach of a survey and face-to-face interviews. The participants were male and female, with a large majority ranging from 18 to 21 years of age. The research found that participants recognized their skills and capability, but their capacity to remain in the program was dependent on understanding and meeting the demanding pace and rigour of the program. The participants recognized that curriculum delivery along with instructor-student interaction had an impact on student retention. To be successful in the program, students required support in four domains: academic, learning management, career, and social.

  13. New technologies to improve laboratory testing

    Science.gov (United States)

    Burtis, C. A.

    Several core technologies that are having, or will have, an impact on the clinical laboratory are discussed. These include instrument-related technologies such as computer technology, chemometrics, robotics, sensors, and biological technologies such as cell fusion and recombinant DNA.

  14. Molten carbonate fuel cell technology improvement

    Energy Technology Data Exchange (ETDEWEB)

    1991-06-01

    This report summarizes the work performed under Department of Energy Contract DEAC21-87MC23270, Molten Carbonate Fuel Cell Technology Improvement.'' This work was conducted over a three year period and consisted of three major efforts. The first major effort was the power plant system study which reviewed the competitive requirements for a coal gasifier/molten carbonate fuel cell power plant, produced a conceptual design of a CG/MCFC, and defined the technology development requirements. This effort is discussed in Section 1 of the report. The second major effort involved the design and development of a new MCFC cell configuration which reduced the material content of the cell to a level competitive with competing power plants, simplified the cell configuration to make the components more manufacturable and adaptable to continuous low cost processing techniques, and introduced new-low-pressure drop flow fields for both reactant gases. The new flow fields permitted the incorporation of recirculation systems in both reactant gas systems, permitting simplified cooling techniques and the ability to operate on both natural gas and a wide variety of gasifier fuels. This cell technology improvement is discussed in Section 2. The third major effort involved the scaleup of the new cell configuration to the full-area, 8-sq-ft size and resulted in components used for a 25-kW, 20-cell stack verification test. The verification test was completed with a run of 2200 hours, exceeding the goal of 2000 hours and verifying the new cell design. TWs test, in turn, provided the confidence to proceed to a 100-kW demonstration which is the goal of the subsequent DOE program. The scaleup and stack verification tests are discussed in Sections 3, 4, 5, and 6 of this report.

  15. What's in children's backpacks: foods brought from home.

    Science.gov (United States)

    Hubbard, Kristie L; Must, Aviva; Eliasziw, Misha; Folta, Sara C; Goldberg, Jeanne

    2014-09-01

    Forty-one percent of elementary schoolchildren bring lunch to school on any given day. Forty-five percent bring snacks. Surprisingly, little is known about the foods and beverages they bring. This cross-sectional analysis of baseline data from the GREEN (Growing Right: Eco-friendly Eating and Nutrition) Project Lunch Box Study sought to characterize foods and beverages brought from home to school by elementary schoolchildren and compare the quality of packed lunches with National School Lunch Program standards and packed snacks with Child and Adult Care Food Program requirements. Lunches and snacks from 626 elementary schoolchildren were assessed and evaluated using digital photography and a supplemental food checklist. Food and beverage types most likely to be provided for lunch were sandwiches (59%), snack foods (42%), fruit (34%), desserts (28%), water (28%), and sugar-sweetened beverages (24%). Twenty-seven percent of lunches met at least three of five National School Lunch Program standards. At snack, snack foods (62%), desserts (35%), and sugar-sweetened beverages (35%) were more common than fruits (30%), dairy foods (10%), and vegetables (3%). Only 4% of snacks met two of four Child and Adult Care Food Program standards. Future research is needed to understand the multiple determinants of food-packing behavior, including constraints faced by families. School wellness policies should consider initiatives that work collaboratively with parents to improve the quality of foods brought from home.

  16. ADOPTION OF IMPROVED TECHNOLOGY IN ETHIOPIA By

    African Journals Online (AJOL)

    Etsub [ ETSUB

    technologies are properly transferred and disseminated to farmers so as to deepen ... agricultural technology need to have the capacity to carry out studies that ... responsible for adoption patterns and risk taking behaviour are known in ...

  17. Improving Information Technology Curriculum Learning Outcomes

    Directory of Open Access Journals (Sweden)

    Derrick L Anderson

    2017-06-01

    The case study research methodology has been selected to conduct the inquiry into this phenomenon. This empirical inquiry facilitates exploration of a contemporary phenomenon in depth within its real-life context using a variety of data sources. The subject of analysis will be two Information Technology classes composed of a combination of second year and third year students; both classes have six students, the same six students. Contribution It is the purpose of this research to show that the use of improved approaches to learning will produce more desirable learning outcomes. Findings The results of this inquiry clearly show that the use of the traditional behaviorist based pedagogic model to achieve college and university IT program learning outcomes is not as effective as a more constructivist based andragogic model. Recommendations Instruction based purely on either of these does a disservice to the typical college and university level learner. The correct approach lies somewhere in between them; the most successful outcome attainment would be the product of incorporating the best of both. Impact on Society Instructional strategies produce learning outcomes; learning outcomes demonstrate what knowledge has been acquired. Acquired knowledge is used by students as they pursue professional careers and other ventures in life. Future Research Learning and teaching approaches are not “one-size-fits-all” propositions; different strategies are appropriate for different circumstances and situations. Additional research should seek to introduce vehicles that will move learners away from one the traditional methodology that has been used throughout much of their educational careers to an approach that is better suited to equip them with the skills necessary to meet the challenges awaiting them in the professional world.

  18. Improving Software Guidance for Technology Readiness Assessments (TRA)

    Science.gov (United States)

    2010-04-29

    Systems & Software Technology Conference Improving Software Guidance for Technology Readiness Assessments (TRA) 29 April 2010 Mike Nicol...APR 2010 2. REPORT TYPE 3. DATES COVERED 00-00-2010 to 00-00-2010 4. TITLE AND SUBTITLE Improving Software Guidance for Technology Readiness...Presented at the 22nd Systems and Software Technology Conference (SSTC), 26-29 April 2010, Salt Lake City, UT. 14. ABSTRACT 15. SUBJECT TERMS

  19. A Technology Approach to Improving Process Management

    Science.gov (United States)

    Dray, Lori; Strasburger, Tom

    2013-01-01

    It is impossible to ignore how technology is infiltrating education. Interactive projectors and other technologies give teachers and students the opportunity to bring lessons to life. Some districts are replacing textbooks with digital content, allowing students to interact with content in new ways. Galion City School District in Galion, Ohio, is…

  20. Capture technologies: Improvements and promising developments

    NARCIS (Netherlands)

    Blomen, E.; Hendriks, C.; Neele, F.

    2009-01-01

    In this status report we want to provide a comprehensive overview of the current status and promising technologies of CO2 capture by means of a literature review, in-house knowledge and interviews. We describe the technology, bottlenecks towards implementation and potential use. The results will be

  1. Improving primary health care through technological innovation.

    NARCIS (Netherlands)

    Groenewegen, P.P.; Hutten, J.B.F.

    1989-01-01

    As a result of policy changes and developments on the demand side, the importance of technology in primary health care will grow fast. An approach to the implementation of new technologies in primary health care is presented in this article. First we describe the main problems in Dutch primary healt

  2. Technology Deployment to Improve Clinical Outcomes

    Institute of Scientific and Technical Information of China (English)

    TM Judd; L Jacobs; M Jansen; B Birch

    2016-01-01

    Improved child, newborn, and maternal health (CNM) is a top priority in developing countries. Many factors must be addressed simultaneously to improve clinical outcomes for CNM. A public-private project in Haiti that will deploy the World Health Organization (WHO) evidence-based medicine (EBM) and essential interventions utilizing CNM healthcare technologies (HT), is expected to be a model for improving national health systems. The CNM mortality rates in Haiti are the highest in the western hemisphere with rates similar to those found in Afghanistan and several African countries. Several factors perpetuating this crisis are noted, as well as the most cost-effective interventions proven to decrease CNM mortality rates in low-and middle-income countries. To create major change in health system infrastructure, two strategies are presented, requiring appropriate and leading-edge health technologies (HT),e.g., wireless cellular-network-based Telemedicine (TM): (1) Development of a countrywide network of geographical“Community Care Grids” to facilitate implementation of frontline interventions; (2) The construction of a central hospital (called Bethesda Referral and Teaching Hospital-BRTH NGO) that will provide secondary and tertiary care for communities throughout the country, including helping local hospitals and clinics practice EBM care. We believe that these strategies-supported by HT will fast track improvement in CNM mortality rates throughout the country and that in a relatively short period of time Haiti’s health care system will be among the leaders in the region. Primary factors contributing to the CNM crisis, all addressed by TM: (1) Limited access: demographics, geography, cost, transportation; (2) Inadequate health care facilities: less than 20 NICU beds for 10 million population; BRTH to provide 80 bed NICU and 40 bed PICU in 225 bed hospital; (3) Health care practitioners: inadequate numbers and training; (4) Low% of skilled attendants now at

  3. Improving diabetes management with mobile health technology.

    Science.gov (United States)

    Sieverdes, John C; Treiber, Frank; Jenkins, Carolyn

    2013-04-01

    Diabetes affects 25.8 million persons in the United States, and these persons make more than 35 million ambulatory care visits annually. Yet, less than half of persons with diabetes meet the recommended levels of A1C, blood pressure and lipid control. One innovative approach is to use mobile health technologies to help patients better manage their diabetes and related conditions, and 85% to 90% of patients have access to mobile health technology. A brief review of the guidelines for diabetes care and mobile health technology that can support the guidelines are reported related to (1) glycemic control and self-monitoring of blood glucose, (2) pharmacological approaches and medication management, (3) medical nutrition therapy, (4) physical activity and resistance training, (5) weight loss, (6) diabetes self-management education and (7) blood pressure control and hypertension. The patient and provider are encouraged to explore possibilities for mobile health technologies that can support behavior change.

  4. Certifying personal protective technologies: improving worker safety

    National Research Council Canada - National Science Library

    Cohen, Howard J; Liverman, Catharyn T

    .... For personal protective technologies (PPT)--where the major purpose of the product is to protect the wearer against a hazard--a deficit in product effectiveness can mean injury, illness, or death...

  5. 3G技术背景下的手机新媒体为新闻传播教学带来的机遇与挑战%The Opportunities and Challenges Brought by Cellphone New Media as a Part of Journalism and Communication Teaching in the Background of 3G Technology

    Institute of Scientific and Technical Information of China (English)

    庄鹏

    2013-01-01

    3G技术的充分发展为手机媒体赋予了更多的功能与能力,它带来了媒介环境的更新,又进一步影响了人们的认知习惯与思维方式,而这一切都导致了高校育人环境的变更。本文以新闻传播教学为个案,探讨了3G技术背景下的手机新媒体对新闻传播教学带来的种种变革、机遇与挑战。%The full development of 3G technology gives mobile media more features and capabilities, and it brings an updated media environment, and further affects people's cognitive habits and ways of thinking, and all this leads to a change of university education environment. With journalism and communication ed-ucation as a case, this paper explores the changes, opportunities and challenges brought by mobile media to journalism and com-munication education.

  6. Using Open Space Technology for School Improvement.

    Science.gov (United States)

    Cox, David

    2002-01-01

    Describes a theory referred to as Open Space Technology (OST), which holds that the most productive learning in conference settings takes place in the open space between formally scheduled conference sessions. Argues that OST can be applied to staff development days and other educational development programs. (Contains 10 references.) (NB)

  7. Survey Harmonisation with New Technologies Improvement (SHANTI)

    DEFF Research Database (Denmark)

    Kagerbauer, Martin

    not miss the opportunities of an advancement by means of new information and communication technologies. The purpose of this Action was to coordinate research efforts on data harmonization for transport surveys across Europe. Guidelines for harmonizing surveys are not only a statistical problem, because...... different approaches and data qualities exist. The data needs from the transport sector allow the assessment of past policies, in terms of efficiency and equity. They allow the elaboration of new policies measures at European level (e.g. to reduce the emissions due to transport). Mobile communication...... and positioning technologies including GPS/GALILEO, GSM and Radio Data System (RDS) have advanced rapidly and their costs are decreasing. They demonstrate great potential as survey instruments for tracking individual mobility and travel behaviour as well as freight movements, by enabling to conduct surveys along...

  8. Enabling Technologies for Improved Data Management: Hardware

    Directory of Open Access Journals (Sweden)

    Kerstin van Dam-Kleese

    2001-01-01

    Full Text Available The most valuable assets in every scientific community are the expert work force and the research results/data produced. The last decade has seen new experimental and computational techniques developing at an ever-faster pace, encouraging the production of ever-larger quantities of data in ever-shorter time spans. Concurrently the traditional scientific working environment has changed beyond recognition. Today scientists can use a wide spectrum of experimental, computational and analytical facilities, often widely distributed over the UK and Europe. In this environment new challenges are posed for the Management of Data every day, but are we ready to tackle them? Do we know exactly what the challenges are? Is the right technology available and is it applied where necessary? This part of enabling technologies investigates current hardware techniques and their functionalities and provides a comparison between various products.

  9. Thixocasting and rheocasting technologies, improvements going on

    OpenAIRE

    Rosso, M.

    2012-01-01

    Purpose: The paper proposes an overview of the actual most important and applied rheocasting technologies for the manufacturing of high performance Al components. Some excellent results recently attained in industrial applications are presented and discussed.Design/methodology/approach: Samples were machined from the produced parts and mechanical tests, i.e. tensile and impact, were executed on series of samples; moreover, microstructure features and the morphology of fractures were observed ...

  10. Techniques to improve technological and sanitary quality

    OpenAIRE

    David, C.; Celette, F.; Abecassis, J; Carcea, M.; Dubois, D.; Friedel, J. K.; Hellou, G.; Jeuffroy, M.-H.; Mäder, P.; Thomsen, I.K.

    2012-01-01

    Agronomical ways for better quality and safety Choice of cultivar is an efficient way to obtain higher grain quality. Intercropping legumes (grain or forage) improves weed competition and N availability for wheat crop or succeeding crop. Green manure can be an effective alternative to farmyard manure. Fertilization with readily available nitrogen improves yield and quality when water is available. Reduced tillage affects soil fertility and wheat yield but has little effects on grain qualit...

  11. Brought in Dead: An Avoidable Delay in Maternal Deaths.

    Science.gov (United States)

    Kumar, Aruna; Agrawal, Neha

    2016-10-01

    Maternal brought in dead are the patient who dies in the need of adequate medical care. These deaths are often not analyzed sincerely as they are not institutional deaths. Our aim is to find out actual life threatening cause of delay leading to death. Patients brought dead to casualty were seen by the doctors on duty in Department of Obstetrics and Gynaecology,Gandhi Medical College, Bhopal round the clock. Cause of death was analyzed by verbal autopsy of attendants and referral letter from the institute. In this analytical study a complete evaluation of brought deaths from January 2011 to Decmeber 2014 was done. A total of 64 brought in deaths were reported in this 4 year duration. Most common cause of death was postpartum hemorrhage (54.68 %) followed by hypertension (15.62 %) and the most common cause of delay was delay in getting adequate treatment (56.25 %). The brought in dead are the indicator of the three delays in getting health care. Challenges appear to be enormous to be tackled. Timely management proves to be critical in preventing maternal death. Thus it appears that community education about pregnancy and its complications, EmOC training at FRU and strict adherence to referral protocol may help us to reduce the brought dead burden.

  12. Blockchain technology for improving clinical research quality.

    Science.gov (United States)

    Benchoufi, Mehdi; Ravaud, Philippe

    2017-07-19

    Reproducibility, data sharing, personal data privacy concerns and patient enrolment in clinical trials are huge medical challenges for contemporary clinical research. A new technology, Blockchain, may be a key to addressing these challenges and should draw the attention of the whole clinical research community.Blockchain brings the Internet to its definitive decentralisation goal. The core principle of Blockchain is that any service relying on trusted third parties can be built in a transparent, decentralised, secure "trustless" manner at the top of the Blockchain (in fact, there is trust, but it is hardcoded in the Blockchain protocol via a complex cryptographic algorithm). Therefore, users have a high degree of control over and autonomy and trust of the data and its integrity. Blockchain allows for reaching a substantial level of historicity and inviolability of data for the whole document flow in a clinical trial. Hence, it ensures traceability, prevents a posteriori reconstruction and allows for securely automating the clinical trial through what are called Smart Contracts. At the same time, the technology ensures fine-grained control of the data, its security and its shareable parameters, for a single patient or group of patients or clinical trial stakeholders.In this commentary article, we explore the core functionalities of Blockchain applied to clinical trials and we illustrate concretely its general principle in the context of consent to a trial protocol. Trying to figure out the potential impact of Blockchain implementations in the setting of clinical trials will shed new light on how modern clinical trial methods could evolve and benefit from Blockchain technologies in order to tackle the aforementioned challenges.

  13. How Advances in Technology Improve HIV/AIDS Care

    Directory of Open Access Journals (Sweden)

    Nik Tehrani

    2016-12-01

    Full Text Available In the U.S., the number of individuals aged 50 and older who are living with HIV has increased, leading to a phenomenon called the graying of the HIV/AIDS epidemic. Advances in treating HIV have brought about a large growing population of seniors with HIV who are simultaneously facing social, psychological, and physical challenges correlated with the aging process. The stigma against HIV/AIDS has been linked to poor health, depression, and loneliness. In a recent study, about 39.1% of HIV/AIDS patients showed symptoms of major depression (C. Grov et al, 2010. Consequently, to reduce lasting effects of major depressive symptoms, there is a vital need for service providers to employ innovative efforts to confront the stigma and psychosocial and physical health problems that are characteristic of an older HIV/AIDS population. The new technological approaches to healthcare delivery have resulted in faster, more accurate diagnosis and monitoring, in more sophisticated coordination across regions and agencies, and in sophisticated risk-checking procedures. New healthcare technology that can help the AIDS/HIV patient is called Health Information Technology, a basic element of Health Relationship Management Services (HRMS, which is a new approach to healthcare. HRMS can assist individuals with HIV/AIDS in managing not only their physical, but also their mental health.

  14. Geospatial Technologies to Improve Urban Energy Efficiency

    Directory of Open Access Journals (Sweden)

    Bharanidharan Hemachandran

    2011-07-01

    Full Text Available The HEAT (Home Energy Assessment Technologies pilot project is a FREE Geoweb mapping service, designed to empower the urban energy efficiency movement by allowing residents to visualize the amount and location of waste heat leaving their homes and communities as easily as clicking on their house in Google Maps. HEAT incorporates Geospatial solutions for residential waste heat monitoring using Geographic Object-Based Image Analysis (GEOBIA and Canadian built Thermal Airborne Broadband Imager technology (TABI-320 to provide users with timely, in-depth, easy to use, location-specific waste-heat information; as well as opportunities to save their money and reduce their green-house-gas emissions. We first report on the HEAT Phase I pilot project which evaluates 368 residences in the Brentwood community of Calgary, Alberta, Canada, and describe the development and implementation of interactive waste heat maps, energy use models, a Hot Spot tool able to view the 6+ hottest locations on each home and a new HEAT Score for inter-city waste heat comparisons. We then describe current challenges, lessons learned and new solutions as we begin Phase II and scale from 368 to 300,000+ homes with the newly developed TABI-1800. Specifically, we introduce a new object-based mosaicing strategy, an adaptation of Emissivity Modulation to correct for emissivity differences, a new Thermal Urban Road Normalization (TURN technique to correct for scene-wide microclimatic variation. We also describe a new Carbon Score and opportunities to update city cadastral errors with automatically defined thermal house objects.

  15. Improved technology for manufacture of carbon electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Platon, A.; Dumbrava, A.; Petrescu, N.I.; Simionescu, L.

    2000-07-01

    The paper presents investigations to improve some physico-chemical characteristics of carbon electrodes (such as coefficient of thermal expansion, mechanical strengths, density, pore volume, porosity etc.) obtained in different manufacture steps by addition of varieties of coal tar pitch. These include attempts to improve the chemical compatibility of the coke-pitch system in the mixture and establish the method and the point of introduction of additive, the concentration required and appropriate analytical control during the entire manufacture. Methods of analysis used include thermogravimetry and porosimetry. The microstructure of the electrodes is investigated through a wide range and the data obtained include pore size and pore volume distribution, surface area, porosity, particle size distribution and type of pores. The overall results clearly indicate better characteristics and performance for electrodes with additives as against electrodes without them, such as lower porosity, lower thermal expansion coefficients and greater mechanical strength. These data are analyzed with respect to the process step and electrode type.

  16. Automation Technology Improvements on SEE Test Facility

    Institute of Scientific and Technical Information of China (English)

    FAN; Hui; LIU; Jian-cheng; SHEN; Dong-jun

    2012-01-01

    <正>When user do heavy ion SEE tests in the irradiation facility, the ion beam should be uniform and the beam flux should be fit for their tests. User also wants the sample position easy to be located. These requirements are very important for our facility. This year, our team has paid great effort in improving beam parameter monitoring and auto control ability of facility. The main jobs are as follows.

  17. An Improved Valuation Model for Technology Companies

    Directory of Open Access Journals (Sweden)

    Ako Doffou

    2015-06-01

    Full Text Available This paper estimates some of the parameters of the Schwartz and Moon (2001 model using cross-sectional data. Stochastic costs, future financing, capital expenditures and depreciation are taken into account. Some special conditions are also set: the speed of adjustment parameters are equal; the implied half-life of the sales growth process is linked to analyst forecasts; and the risk-adjustment parameter is inferred from the company’s observed stock price beta. The model is illustrated in the valuation of Google, Amazon, eBay, Facebook and Yahoo. The improved model is far superior to the Schwartz and Moon (2001 model.

  18. Improving drug manufacturing with process analytical technology.

    Science.gov (United States)

    Rodrigues, Licinia O; Alves, Teresa P; Cardoso, Joaquim P; Menezes, José C

    2006-01-01

    Within the process analytical technology (PAT) framework, as presented in the US Food and Drug Administration guidelines, the aim is to design, develop and operate processes consistently to ensure a pre-defined level of quality at the end of the manufacturing process. Three PAT implementation scenarios can be envisaged. Firstly, PAT could be used in its most modest version (in an almost non-PAT manner) to simply replace an existing quality control protocol (eg, using near-infrared spectroscopy for an in-process quality control, such as moisture content). Secondly, the use of in-process monitoring and process analysis could be integrated to enhance process understanding and operation for an existing industrial process. Thirdly, PAT could be used extensively and exclusively throughout development, scale-up and full-scale production of a new product and process. Although the first type of implementations are well known, reports of the second and third types remain scarce. Herein, results obtained from PAT implementations of the second and third types are described for two industrial processes for preparing bulk active pharmaceutical ingredients, demonstrating the benefits in terms of increased process understanding and process control.

  19. Vaccine engineering improved by hybrid technology.

    Science.gov (United States)

    Linhart, Birgit; Valenta, Rudolf

    2004-08-01

    The term 'vaccination' describes the induction of protective immune responses against infectious diseases, but is also used to define antigen-specific forms of immunotherapy for allergy, cancer and autoimmunity. Successful vaccination requires either immune modulation or the induction of robust specific immunity to several disease-causing antigens. However, natural antigen sources may contain greatly varying amounts of these antigens and some of them may exhibit low immunogenicity. An approach for overcoming the latter problems has been developed for allergy vaccines recently. This approach is based on the genetic engineering of hybrid molecules, consisting of several major disease-eliciting antigens/epitopes. Such hybrid molecules can be built to include the most relevant epitopes of complex antigen sources. Moreover, fusion of different antigens in the form of hybrid molecules strongly increases their immunogenicity. The hybrid approach can also be used for the generation of mosaic antigens with altered immunological properties, which consist of re-shuffled antigen pieces. We exemplify the use of hybrid technology for the generation of new allergy vaccines and discuss its potential applicability for the development of vaccines for infectious diseases, cancer and autoimmunity.

  20. Improved technology for manufacture of carbon electrodes

    Indian Academy of Sciences (India)

    A Platon; A Dumbrava; N Iutes-Petrescu; Luzia Simionescu

    2000-02-01

    Current industrial carbon electrodes are typically manufactured by blending petroleum coke particles (the filler) with molten coal tar pitch (the binder) and extruding the resultant mix to form the `green electrode’. This is then baked under controlled conditions. In case of usage as anodes in steel electric furnaces (or as other carbon and graphite products), the electrodes could undergo further processing like pitch impregnation or graphitization. During heat treatment, some of the organics are destructively distilled, vaporized or decomposed, resulting in carbon deposition in the electrode. As the vaporized materials exit the body of the electrode they cause porosity in the walls, which results in reduction in density, current carrying capacity and flexural strength. The paper presents investigations to improve some physico-chemical characteristics of these electrodes (such as coefficient of thermal expansion, mechanical strengths, density, pore volume, porosity etc.), obtained in different manufacture steps, by addition of varieties of coal tar pitch. These include attempts to improve the chemical compatibility of the coke-pitch system in the mixture and establish the method and the point of introduction of additive, the concentration required and appropriate analytical control during the entire manufacture. Methods of analysis used include thermogravimetry and porosimetry. The microstructure of the electrodes is investigated through a wide range and the data obtained include pore size and pore volume distribution, surface area, porosity, particle size distribution and type of pores. The overall results clearly indicate better characteristics and performance for electrodes with additives as against electrodes without them, such as lower porosity, lower thermal expansion coefficients and greater mechanical strength. These data are analyzed with respect to the process step and electrode type.

  1. ECONOMIC AND ENERGETICAL ANALYSIS OF IMPROVED WASTE UTILIZATION PLASMA TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Serghei VAMBOL

    2015-07-01

    Full Text Available Purpose. Energy and economic evaluation of the improved plasma waste utilization technological process, as well as an expediency substantiation of the use of improved plasma technology by comparing its energy consumption with other thermal methods of utilization. Methodology. Analysis of existing modern and advanced methods of waste management and its impact on environmental safety. Considering of energy and monetary costs to implement two different waste management technologies. Results. Studies have shown regular gasification ensure greater heating value due to differences, a significant amount of nitrogen than for plasma gasification. From the point of view of minimizing energy and monetary costs and environmental safety more promising is to offer advanced technology for plasma waste. To carry out the energy assessment of the appropriateness of the considered technologies-comparative calculation was carried out at the standard conditions. This is because in the processing of waste produced useful products, such as liquefied methane, synthetic gas (94% methane and a fuel gas for heating, suitable for sale that provides cost-effectiveness of this technology. Originality. Shown and evaluated ecological and economic efficiency of proposed improved plasma waste utilization technology compared with other thermal techniques. Practical value. Considered and grounded of energy and monetary costs to implement two different waste management technologies, namely ordinary gasification and using plasma generators. Proposed plasma waste utilization technology allows to obtain useful products, such as liquefied methane, synthetic gas and a fuel gas for heating, which are suitable for sale. Plant for improved plasma waste utilization technological process allows to compensate the daily and seasonal electricity and heat consumption fluctuations by allowing the storage of obtained fuel products.

  2. Information Technology to Support Improved Care For Chronic Illness

    OpenAIRE

    Young, Alexander S.; Chaney, Edmund; Shoai, Rebecca; Bonner, Laura; Cohen, Amy N.; Doebbeling, Brad; Dorr, David; Goldstein, Mary K.; Kerr, Eve; Nichol, Paul; Perrin, Ruth

    2007-01-01

    Background In populations with chronic illness, outcomes improve with the use of care models that integrate clinical information, evidence-based treatments, and proactive management of care. Health information technology is believed to be critical for efficient implementation of these chronic care models. Health care organizations have implemented information technologies, such as electronic medical records, to varying degrees. However, considerable uncertainty remains regarding the relative ...

  3. An overview of weapons technologies used to improve US healthcare

    Energy Technology Data Exchange (ETDEWEB)

    Fahrenholtz, J.; Kovarik, T.L.

    1995-05-01

    At Sandia National Laboratories the Biomedical Engineering Program uses existing weapons-related technology in medical applications in order to reduce health care costs, improve diagnoses, and promote efficient health care delivery. This paper describes several projects which use Sandia technologies to solve biomedical problems. Specific technical capabilities that are important to this program include sensor data interpretation, robotics, lasers and optics, microelectronics, image processing and materials.

  4. Quantitative Determination of Technological Improvement from Patent Data

    Science.gov (United States)

    2015-01-01

    The results in this paper establish that information contained in patents in a technological domain is strongly correlated with the rate of technological progress in that domain. The importance of patents in a domain, the recency of patents in a domain and the immediacy of patents in a domain are all strongly correlated with increases in the rate of performance improvement in the domain of interest. A patent metric that combines both importance and immediacy is not only highly correlated (r = 0.76, p = 2.6*10-6) with the performance improvement rate but the correlation is also very robust to domain selection and appears to have good predictive power for more than ten years into the future. Linear regressions with all three causal concepts indicate realistic value in practical use to estimate the important performance improvement rate of a technological domain. PMID:25874447

  5. Benchmarking and Performance Improvement at Rocky Flats Environmental Technology Site

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, C. [Kaiser-Hill Co., LLC, Golden, CO (United States)], Doyle, D. [USDOE Rocky Flats Office, Golden, CO (United States)], Featherman, W.D. [Project Performance Corp., Sterline, VA (United States)

    1997-12-31

    The Rocky Flats Environmental Technology Site (RFETS) has initiated a major work process improvement campaign using the tools of formalized benchmarking and streamlining. This paper provides insights into some of the process improvement activities performed at Rocky Flats from November 1995 through December 1996. It reviews the background, motivation, methodology, results, and lessons learned from this ongoing effort. The paper also presents important gains realized through process analysis and improvement including significant cost savings, productivity improvements, and an enhanced understanding of site work processes.

  6. Technological Specialisation Courses in Portugal: Description and Suggested Improvements

    Science.gov (United States)

    da Costa, Nilza Maria Vilhena Nunes; Simoes, Ana Raquel; Pereira, Giselia Antunes; Pombo, Lucia

    2009-01-01

    This study is a part of the "Post-secondary Vocational Training in Portugal Project: from a description through to suggestions to improve training quality", which ran from 2003 to 2006. This article, which makes use of data obtained from interviews with Directors of Schools which offer technological specialisation courses (CETs) and from…

  7. The economic valuation of improved process plant decision support technology.

    Science.gov (United States)

    White, Douglas C

    2007-06-01

    How can investments that would potentially improve a manufacturing plant's decision process be economically justified? What is the value of "better information," "more flexibility," or "improved integration" and the technologies that provide these effects? Technology investments such as improved process modelling, new real time historians and other databases, "smart" instrumentation, better data analysis and visualization software, and/or improved user interfaces often include these benefits as part of their valuation. How are these "soft" benefits to be converted to a quantitative economic return? Quantification is important if rational management decisions are to be made about the correct amount of money to invest in the technologies, and which technologies to choose among the many available ones. Modelling the plant operational decision cycle-detect, analyse, forecast, choose and implement--provides a basis for this economic quantification. In this paper a new economic model is proposed for estimation of the value of decision support investments based on their effect upon the uncertainty in forecasting plant financial performance. This model leads to quantitative benefit estimates that have a realistic financial basis. An example is presented demonstrating the application of the method.

  8. Information Literacy and technology to improve learning and education

    NARCIS (Netherlands)

    Mooij, Ton; Smeets, Ed

    2011-01-01

    Mooij, T., & Smeets, E. (2011, 13-16 September). Information Literacy and technology to improve learning and education. Presentation and discussion in a cross-network symposium of networks 16 and 12 at the ‘European Conference on Educational Research’ of the “European Educational Research

  9. Information Literacy and technology to improve learning and education

    NARCIS (Netherlands)

    Mooij, Ton; Smeets, Ed

    2011-01-01

    Mooij, T., & Smeets, E. (2011, 13-16 September). Information Literacy and technology to improve learning and education. Presentation and discussion in a cross-network symposium of networks 16 and 12 at the ‘European Conference on Educational Research’ of the “European Educational Research Associatio

  10. Information Literacy and technology to improve learning and education

    NARCIS (Netherlands)

    Mooij, Ton; Smeets, Ed

    2011-01-01

    Mooij, T., & Smeets, E. (2011, 13-16 September). Information Literacy and technology to improve learning and education. Presentation and discussion in a cross-network symposium of networks 16 and 12 at the ‘European Conference on Educational Research’ of the “European Educational Research Associatio

  11. Technologies for improved soil carbon management and environmental quality

    Energy Technology Data Exchange (ETDEWEB)

    Reicosky, D.C. [USDA-Agricultural Research Service, Morris, MN (United States)

    1997-12-31

    The objective of this paper is to create an environmental awareness of and to provide insight into the future balance of environment and economic issues in developing new technologies that benefit the farmer, the public, and agricultural product sales. Agricultural impacts of tillage-induced CO{sub 2} losses are addressed along with new and existing technologies to minimize tillage-induced flow of CO{sub 2} to the atmosphere, Emphasis is placed on the carbon cycle and the cost of environmental damage to illustrate the need for improved technologies leading to reduced environmental impacts by business ventures. New technologies and concepts related to methods of tillage and stover management for carbon sequestration with the agricultural production systems are presented. 16 refs., 3 figs.

  12. European consumer response to packaging technologies for improved beef safety.

    Science.gov (United States)

    Van Wezemael, Lynn; Ueland, Øydis; Verbeke, Wim

    2011-09-01

    Beef packaging can influence consumer perceptions of beef. Although consumer perceptions and acceptance are considered to be among the most limiting factors in the application of new technologies, there is a lack of knowledge about the acceptability to consumers of beef packaging systems aimed at improved safety. This paper explores European consumers' acceptance levels of different beef packaging technologies. An online consumer survey was conducted in five European countries (n=2520). Acceptance levels among the sample ranged between 23% for packaging releasing preservative additives up to 73% for vacuum packaging. Factor analysis revealed that familiar packaging technologies were clearly preferred over non-familiar technologies. Four consumer segments were identified: the negative (31% of the sample), cautious (30%), conservative (17%) and enthusiast (22%) consumers, which were profiled based on their attitudes and beef consumption behaviour. Differences between consumer acceptance levels should be taken into account while optimising beef packaging and communicating its benefits.

  13. BEACON SYNCHRONIZATION TECHNOLOGY FOR “BEIDOU” TERRESTRIAL IMPROVEMENT SYSTEM

    Institute of Scientific and Technical Information of China (English)

    WEIJin-chen; TANGJi-qiang; SHENFeng

    2005-01-01

    Synchronization is an essential technology in the radio navigation system. The technique for improving the “Beidou” positioning ability is presented through constituting the terrestrial improvement system, and the beacon synchronization of the improvement system with the “Beidou” one-way time transfer model is realized.The direct digital synthesis (DDS) is adopted to generate the pseudo-random code clock having high precision and stability. Meanwhile, the CPLD device is used to design the synchronization pulse picking-up module, the spread spectrum PN code generator and the spread spectrum modulator. Measurement results indicate that the beacon synchronization has the high precision and the stability.

  14. Improved animal welfare, the right technology and increased business.

    Science.gov (United States)

    Støier, S; Larsen, H D; Aaslyng, M D; Lykke, L

    2016-10-01

    Animal welfare is receiving increasing attention from the authorities, the public and NGOs. For this reason, the improvement of animal welfare and animal handling systems is of the utmost importance for the meat industry. Technological developments have led to more animal friendly systems that handle animals on the day of slaughter, and these developments will be even more important as consideration for animal welfare and sustainability is no longer just a trend but a licence to operate. Improvement of animal welfare also leads to a higher value of the carcasses due to higher product quality, less cut-off caused by fewer injuries, and reduced working load, which leads to increased business opportunities. Therefore, good animal welfare is good business, and the development and implementation of new technology is the way to obtain improved animal welfare. These subjects will be addressed using examples and cases from the pork and broiler production industry.

  15. Role of Recombinant DNA Technology to Improve Life

    Directory of Open Access Journals (Sweden)

    Suliman Khan

    2016-01-01

    Full Text Available In the past century, the recombinant DNA technology was just an imagination that desirable characteristics can be improved in the living bodies by controlling the expressions of target genes. However, in recent era, this field has demonstrated unique impacts in bringing advancement in human life. By virtue of this technology, crucial proteins required for health problems and dietary purposes can be produced safely, affordably, and sufficiently. This technology has multidisciplinary applications and potential to deal with important aspects of life, for instance, improving health, enhancing food resources, and resistance to divergent adverse environmental effects. Particularly in agriculture, the genetically modified plants have augmented resistance to harmful agents, enhanced product yield, and shown increased adaptability for better survival. Moreover, recombinant pharmaceuticals are now being used confidently and rapidly attaining commercial approvals. Techniques of recombinant DNA technology, gene therapy, and genetic modifications are also widely used for the purpose of bioremediation and treating serious diseases. Due to tremendous advancement and broad range of application in the field of recombinant DNA technology, this review article mainly focuses on its importance and the possible applications in daily life.

  16. Role of Recombinant DNA Technology to Improve Life.

    Science.gov (United States)

    Khan, Suliman; Ullah, Muhammad Wajid; Siddique, Rabeea; Nabi, Ghulam; Manan, Sehrish; Yousaf, Muhammad; Hou, Hongwei

    2016-01-01

    In the past century, the recombinant DNA technology was just an imagination that desirable characteristics can be improved in the living bodies by controlling the expressions of target genes. However, in recent era, this field has demonstrated unique impacts in bringing advancement in human life. By virtue of this technology, crucial proteins required for health problems and dietary purposes can be produced safely, affordably, and sufficiently. This technology has multidisciplinary applications and potential to deal with important aspects of life, for instance, improving health, enhancing food resources, and resistance to divergent adverse environmental effects. Particularly in agriculture, the genetically modified plants have augmented resistance to harmful agents, enhanced product yield, and shown increased adaptability for better survival. Moreover, recombinant pharmaceuticals are now being used confidently and rapidly attaining commercial approvals. Techniques of recombinant DNA technology, gene therapy, and genetic modifications are also widely used for the purpose of bioremediation and treating serious diseases. Due to tremendous advancement and broad range of application in the field of recombinant DNA technology, this review article mainly focuses on its importance and the possible applications in daily life.

  17. Role of Recombinant DNA Technology to Improve Life

    Science.gov (United States)

    Khan, Suliman; Ullah, Muhammad Wajid; Siddique, Rabeea; Nabi, Ghulam; Manan, Sehrish; Yousaf, Muhammad

    2016-01-01

    In the past century, the recombinant DNA technology was just an imagination that desirable characteristics can be improved in the living bodies by controlling the expressions of target genes. However, in recent era, this field has demonstrated unique impacts in bringing advancement in human life. By virtue of this technology, crucial proteins required for health problems and dietary purposes can be produced safely, affordably, and sufficiently. This technology has multidisciplinary applications and potential to deal with important aspects of life, for instance, improving health, enhancing food resources, and resistance to divergent adverse environmental effects. Particularly in agriculture, the genetically modified plants have augmented resistance to harmful agents, enhanced product yield, and shown increased adaptability for better survival. Moreover, recombinant pharmaceuticals are now being used confidently and rapidly attaining commercial approvals. Techniques of recombinant DNA technology, gene therapy, and genetic modifications are also widely used for the purpose of bioremediation and treating serious diseases. Due to tremendous advancement and broad range of application in the field of recombinant DNA technology, this review article mainly focuses on its importance and the possible applications in daily life. PMID:28053975

  18. Advanced Technologies to Improve Closure of Life Support Systems

    Science.gov (United States)

    Barta, Daniel J.

    2016-01-01

    As NASA looks beyond the International Space Station toward long-duration, deep space missions away from Earth, the current practice of supplying consumables and spares will not be practical nor affordable. New approaches are sought for life support and habitation systems that will reduce dependency on Earth and increase mission sustainability. To reduce launch mass, further closure of Environmental Control and Life Support Systems (ECLSS) beyond the current capability of the ISS will be required. Areas of particular interest include achieving higher degrees of recycling within Atmosphere Revitalization, Water Recovery and Waste Management Systems. NASA is currently investigating advanced carbon dioxide reduction processes that surpass the level of oxygen recovery available from the Sabatier Carbon Dioxide Reduction Assembly (CRA) on the ISS. Candidate technologies will potentially improve the recovery of oxygen from about 50% (for the CRA) to as much as 100% for technologies who's end product is solid carbon. Improving the efficiency of water recycling and recovery can be achieved by the addition of advanced technologies to recover water from brines and solid wastes. Bioregenerative technologies may be utilized for water reclaimation and also for the production of food. Use of higher plants will simultaneously benefit atmosphere revitalization and water recovery through photosynthesis and transpiration. The level at which bioregenerative technologies are utilized will depend on their comparative requirements for spacecraft resources including mass, power, volume, heat rejection, crew time and reliability. Planetary protection requirements will need to be considered for missions to other solar system bodies.

  19. Improving truck safety: Potential of weigh-in-motion technology

    Directory of Open Access Journals (Sweden)

    Bernard Jacob

    2010-07-01

    Full Text Available Trucks exceeding the legal mass limits increase the risk of traffic accidents and damage to the infrastructure. They also result in unfair competition between transport modes and companies. It is therefore important to ensure truck compliance to weight regulation. New technologies are being developed for more efficient overload screening and enforcement. Weigh-in-Motion (WIM technologies allow trucks to be weighed in the traffic flow, without any disruption to operations. Much progress has been made recently to improve and implement WIM systems, which can contribute to safer and more efficient operation of trucks.

  20. Information communication technology: new approach for rural cancer care improvement.

    Science.gov (United States)

    Maserat, Elham

    2008-01-01

    Cancer control aims to reduce the incidence, morbidity, and mortality of cancer and to improve the quality of life of cancer patients. For rural populations this presents particular problems. This article covers challenges of oncology care in rural areas and solutions via applying information communication technology with specialty telemedicine for overcoming problems in prevention, early diagnosis, treatment, and palliative care. In addition, telecommunications infrastructures and frameworks for implementation of telemedicine are described.

  1. The Technological Improvements of Aluminum Alloy Coloring by Electrolysis

    Institute of Scientific and Technical Information of China (English)

    LI Nai-jun

    2004-01-01

    The technological process of coloring golden-tawny on aluminum alloy by electrolysis was improved in this paper. The optimum composition of electrolyte was found, the conditions of deposition and anodic oxidation by electrolysis were studied. The oxidative membrane on aluminum alloy was satisfying, the colored aluminum alloy by electrolysis is uniformity,bright and beautiful, and the coloring by electrolysis is convenient and no pollution.

  2. An improved market penetration model for wind energy technology forecasting

    Energy Technology Data Exchange (ETDEWEB)

    Lund, P.D. [Helsinki Univ. of Technology, Espoo (Finland). Advanced Energy Systems

    1995-12-31

    An improved market penetration model with application to wind energy forecasting is presented. In the model, a technology diffusion model and manufacturing learning curve are combined. Based on a 85% progress ratio that was found for European wind manufactures and on wind market statistics, an additional wind power capacity of ca 4 GW is needed in Europe to reach a 30 % price reduction. A full breakthrough to low-cost utility bulk power markets could be achieved at a 24 GW level. (author)

  3. Mechanical spring technology improves running economy in endurance runners

    OpenAIRE

    Riess, Kenneth James

    2014-01-01

    In recent years there has been an increase in participation in timed running events. With this increase, the motivation for individuals to run their best has motivated the running shoe industry to make design changes to traditional running foot wear in an effort to improve running economy (RE) and decrease running times. One such design change has been to incorporate mechanical springs (MS) into the midsole of the running shoe. Evaluation of this technology has yet to be performed. This study...

  4. Leveraging information technology to drive improvement in patient satisfaction.

    Science.gov (United States)

    Nash, Mary; Pestrue, Justin; Geier, Peter; Sharp, Karen; Helder, Amy; McAlearney, Ann Scheck

    2010-01-01

    A healthcare organization's commitment to quality and the patient experience requires senior leader involvement in improvement strategies, and accountability for goals. Further, improvement strategies are most effective when driven by data, and in the world of patient satisfaction, evidence is growing that nurse leader rounding and discharge calls are strategic tactics that can improve patient satisfaction. This article describes how The Ohio State University Medical Center (OSUMC) leveraged health information technology (IT) to apply a data-driven strategy execution to improve the patient experience. Specifically, two IT-driven approaches were used: (1) business intelligence reporting tools were used to create a meaningful reporting system including dashboards, scorecards, and tracking reports and (2) an improvement plan was implemented that focused on two high-impact tactics and data to hardwire accountability. Targeted information from the IT systems enabled clinicians and administrators to execute these strategic tactics, and senior leaders to monitor achievement of strategic goals. As a result, OSUMC's inpatient satisfaction scores on the Hospital Consumer Assessment of Healthcare Providers and Systems survey improved from 56% nines and tens in 2006 to 71% in 2009.

  5. Practice improvement, part II: update on patient communication technologies.

    Science.gov (United States)

    Roett, Michelle A; Coleman, Mary Thoesen

    2013-11-01

    Patient portals (ie, secure web-based services for patient health record access) and secure messaging to health care professionals are gaining popularity slowly. Advantages of web portals include timely communication and instruction, access to appointments and other services, and high patient satisfaction. Limitations include inappropriate use, security considerations, organizational costs, and exclusion of patients who are uncomfortable with or unable to use computers. Attention to the organization's strategic plan and office policies, patient and staff expectations, workflow and communication integration, training, marketing, and enrollment can facilitate optimal use of this technology. Other communication technologies that can enhance patient care include automated voice or text reminders and brief electronic communications. Social media provide another method of patient outreach, but privacy and access are concerns. Incorporating telehealthcare (health care provided via telephone or Internet), providing health coaching, and using interactive health communication applications can improve patient knowledge and clinical outcomes and provide social support.

  6. An Improved Processing Technology of Traditional Soybean Films

    Institute of Scientific and Technical Information of China (English)

    JiangYuanrong; ZhangHui

    2002-01-01

    This paper studies on the processing technology of soybean films.Based on the statistical analysis of the traditional soybean films,two property indices were determined with Rheometer;Percent Elongation(PE) higher than 5.49%,Tensile Strength(TS)higher than 23.25kg/cm2.As the examined specimen has 19.0±0.5% moisture.An improved processing technology high yield of soybean films was obtained.The new product has the nearly same or even higher nutrient content,property and structure as the traditional ones.The new product is consistent,flexible,smooth and transparent.The method offers more promises for commercial-scale film production.

  7. Using mobile technology to improve healthcare service quality.

    Science.gov (United States)

    Chao, Chia Chen; Jen, Wen Yuan; Li, Yu-Chuan; Chi, Y P; Chen, Chang-I; Feng, Chen Chjeh

    2005-01-01

    Improving healthcare service quality for illness of treatment, illness prevention and patient service is difficult for most hospitals because the hospitals are lack adequate resources and labor. In order to provide better healthcare service quality for patients, mobile technology can be used to manage healthcare in a way that provides the optimal healthcare service for patients. Pursuing utilization of mobile technology for better patient service, Taipei Medical University Municipal W. F. Teaching Hospital has implemented a mobile healthcare service (m-HS) system to increase healthcare service quality. The m-HS system improves the quality of medical care as well as healthcare service. The m-HS is a multi-functional healthcare management agent, meets the mobile tendency of the present society. This study seeks to discuss the m-HS architecture and workflow processes. We believe the m-HS does have the potential to improve healthcare service quality. Finally, the conclusions and suggestions for the m-HS are given.

  8. How technology is improving decision making for environmental restoration

    Energy Technology Data Exchange (ETDEWEB)

    Ditmars, J.

    1995-02-01

    Environmental restoration, or the cleanup of contaminants from past activities, at its core depends on a series of decisions about the nature and extent of contamination, the risk to human health and the environment, and the potential effectiveness of remediation techniques and technologies to reduce the risk to acceptable levels. The effectiveness with which these decisions are made has significant impacts on the cost and duration of the cleanup efforts. The decisions must often be made on the basis of incomplete and uncertain data. Emerging environmental information and data acquisition technologies together with appropriate strategies to support decision making are beginning to change the way environmental restoration occurs in the United States. Past environmental restoration activities too often relied on prescriptive data collection activities to generate the information upon which decisions were to be made. Retrospective studies of such activities have shown that, while often data were gathered for the purpose of reducing the risk in decision making, little true reduction in risk was realized and large amounts of resources were consumed. Recent examination of the failures in the United States to achieve many complete cleanups despite the investment of large sums and time points to the inability to have decisions made efficiently. The solution to the problem involves both regulatory change to allow more flexibility in decision-making and the introduction of technology to improve decision making. This paper reviews the recent assessments made of the cleanup process and application of strategies and technologies to enhance decision-making for cleanup. It provides examples of the new decision approaches and the technologies that have been employed to speed up characterization and to optimize the implementation of remediation.

  9. Improving Logistics Processes in Industry Using Web Technologies

    Science.gov (United States)

    Jánošík, Ján; Tanuška, Pavol; Václavová, Andrea

    2016-12-01

    The aim of this paper is to propose the concept of a system that takes advantage of web technologies and integrates them into the management process and management of internal stocks which may relate to external applications and creates the conditions to transform a Computerized Control of Warehouse Stock (CCWS) in the company. The importance of implementing CCWS is in the elimination of the claims caused by the human factor, as well as to allow the processing of information for analytical purposes and their subsequent use to improve internal processes. Using CCWS in the company would also facilitate better use of the potential tools Business Intelligence and Data Mining.

  10. Improving Logistics Processes in Industry Using Web Technologies

    Directory of Open Access Journals (Sweden)

    Jánošík Ján

    2016-12-01

    Full Text Available The aim of this paper is to propose the concept of a system that takes advantage of web technologies and integrates them into the management process and management of internal stocks which may relate to external applications and creates the conditions to transform a Computerized Control of Warehouse Stock (CCWS in the company. The importance of implementing CCWS is in the elimination of the claims caused by the human factor, as well as to allow the processing of information for analytical purposes and their subsequent use to improve internal processes. Using CCWS in the company would also facilitate better use of the potential tools Business Intelligence and Data Mining.

  11. Improvement of crop technology in Asparagus plumosus Bak. A

    Directory of Open Access Journals (Sweden)

    Dumitru ZAHARIA

    1997-08-01

    Full Text Available Improvement of crop technology in Asparagus plumosus Bak. A 0,1% nutritive solution of the N, P, K, elements in raport of 3:1:2; 4:2:3 and 4:3:3 respectively was used to fertilise the plants Asparagus plumosus Bak., for the period between February and Octomber. A 29,8 to 35,20 posesive semnificative increase production of the shoot number per m2 was obtained. The quality of the shoots was not semnificatively influenced by the applied fertilisation system but it appeared to be determined by the cultural factors, light and temperature.

  12. Economics, new technology improve Danish offshore oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Mortensgaard, A. [Danish Energy Agency, Copenhagen (Denmark)

    1996-06-10

    Cost-efficient development concepts and technologies, such as horizontal wells and water injection, have almost tripled the expected ultimate oil recovery from Danish offshore fields. All currently produced Danish oil and gas is from chalk reservoirs. The Danish Energy Agency`s strategies for research and development of improved recovery techniques is related to classifying Danish calk fields into three different reservoir types according to flow characteristics and initial oil saturation. This paper reviews these classification techniques and the methods of extraction for each.

  13. LIGHT-EMITTING DIODE TECHNOLOGY IMPROVES INSECT TRAPPING

    Science.gov (United States)

    GILLEN, JONATHON I.; MUNSTERMANN, LEONARD E.

    2008-01-01

    In a climate of increased funding for vaccines, chemotherapy, and prevention of vector-borne diseases, fewer resources have been directed toward improving disease and vector surveillance. Recently developed light-emitting diode (LED) technology was applied to standard insect-vector traps to produce a more effective lighting system. This approach improved phlebotomine sand fly capture rates by 50%, and simultaneously reduced the energy consumption by 50–60%. The LEDs were incorporated into 2 lighting designs, 1) a LED combination bulb for current light traps and 2) a chip-based LED design for a modified Centers for Disease Control and Prevention light trap. Detailed descriptions of the 2 designs are presented. PMID:18666546

  14. Relativistic quantum metrology: exploiting relativity to improve quantum measurement technologies.

    Science.gov (United States)

    Ahmadi, Mehdi; Bruschi, David Edward; Sabín, Carlos; Adesso, Gerardo; Fuentes, Ivette

    2014-05-22

    We present a framework for relativistic quantum metrology that is useful for both Earth-based and space-based technologies. Quantum metrology has been so far successfully applied to design precision instruments such as clocks and sensors which outperform classical devices by exploiting quantum properties. There are advanced plans to implement these and other quantum technologies in space, for instance Space-QUEST and Space Optical Clock projects intend to implement quantum communications and quantum clocks at regimes where relativity starts to kick in. However, typical setups do not take into account the effects of relativity on quantum properties. To include and exploit these effects, we introduce techniques for the application of metrology to quantum field theory. Quantum field theory properly incorporates quantum theory and relativity, in particular, at regimes where space-based experiments take place. This framework allows for high precision estimation of parameters that appear in quantum field theory including proper times and accelerations. Indeed, the techniques can be applied to develop a novel generation of relativistic quantum technologies for gravimeters, clocks and sensors. As an example, we present a high precision device which in principle improves the state-of-the-art in quantum accelerometers by exploiting relativistic effects.

  15. Applying Network Technology to Improve TV News Production Mode

    Institute of Scientific and Technical Information of China (English)

    冷劲松; 林成栋

    2003-01-01

    With the development of database and computer network technology, traditional TV news production mode (TVNPM) faces great challenge. Up to now, evolution of TVNPM has experienced two stages: In the beginning, TV news is produced completely by hand, named as pipelining TVNPM in this paper. This production mode is limited to space and time, so its production cycle is very time-consuming, and it requires a lot of harmony in different departments; Subsequently, thanks to applications of database technology, a new TVNPM appears, which is named as pooled information resource TVNPM. Compared with pipelining TVNPM, this mode promotes information sharing. However, with the development of network technology, especially the Intranet and the Internet, the pooled information resource TVNPM receives strong impact, and it is referred to contrive a new TVNPM. This new TVNPM must support information sharing, remote collaboration, and interaction in communications so as to improve group work efficiency. In this paper, we present such a new TVNPM, namely, Network TVNPM, give a suit of system solution to support the new TVNPM, introduce the new workflow, and in the end analyze the advantages of Network TVNPM.

  16. IMPROVING LOGISTICS SERVICES THROUGH THE TECHNOLOGY USED IN FLEET MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Mauro Vivaldini

    2012-12-01

    Full Text Available Outsourcing logistics has established itself in the area of the LSP (Logistics Service Provider, which offers a range of services to its customers. In this line, transportation is characterized as one of the most important services, and therefore efficient fleet management is essential for establishing a high level of customer service. With advances in technology and vehicle tracking systems, this approach of management has gained new possibilities for the improvement of logistics services. By studying the specific case of an LSP, this paper investigates the use of these technologies in the management of their business and services. The results indicate that the LSP seeks to increase its services and to streamline information in order to respond to customer needs in real time. It is also evident in this case under study that the combination of the technology available together with the fleet management system has become a distinguishing feature for this LSP, one which increases their skills and important information for both customers and business.

  17. Improved HEPA Filter Technology for Flexible and Rigid Containment Barriers

    Energy Technology Data Exchange (ETDEWEB)

    Pinson, Paul Arthur

    1998-07-01

    Safety and reliability in glovebox operations can be significantly improved and waste packaging efficiencies can be increased by inserting flexible, lightweight, high capacity HEPA filters into the walls of plastic sheet barriers. This HEPA filter/barrier technology can be adapted to a wide variety of applications: disposable waste bags, protective environmental barriers for electronic equipment, single or multiple use glovebag assemblies, flexible glovebox wall elements, and room partitions. These reliable and inexpensive filtered barriers have many uses in fields such as radioactive waste processing, HVAC filter changeout, vapor or grit blasting, asbestos cleanup, pharmaceutical, medical, biological, and electronic equipment containment. The applications can result in significant cost savings, improved operational reliability and safety, and total waste volume reduction. This technology was developed at the Argonne National Laboratory-West (ANL-W) in 1993 and has been used at ANL-W since then at the TRU Waste Characterization Chamber Gloveboxes. Another 1998 AGS Conference paper titled "TRU Waste Characterization Gloveboxes", presented by Mr. David Duncan of ANL-W, describes these boxes.

  18. Molten carbonate fuel cell technology improvement. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1991-06-01

    This report summarizes the work performed under Department of Energy Contract DEAC21-87MC23270, ``Molten Carbonate Fuel Cell Technology Improvement.`` This work was conducted over a three year period and consisted of three major efforts. The first major effort was the power plant system study which reviewed the competitive requirements for a coal gasifier/molten carbonate fuel cell power plant, produced a conceptual design of a CG/MCFC, and defined the technology development requirements. This effort is discussed in Section 1 of the report. The second major effort involved the design and development of a new MCFC cell configuration which reduced the material content of the cell to a level competitive with competing power plants, simplified the cell configuration to make the components more manufacturable and adaptable to continuous low cost processing techniques, and introduced new-low-pressure drop flow fields for both reactant gases. The new flow fields permitted the incorporation of recirculation systems in both reactant gas systems, permitting simplified cooling techniques and the ability to operate on both natural gas and a wide variety of gasifier fuels. This cell technology improvement is discussed in Section 2. The third major effort involved the scaleup of the new cell configuration to the full-area, 8-sq-ft size and resulted in components used for a 25-kW, 20-cell stack verification test. The verification test was completed with a run of 2200 hours, exceeding the goal of 2000 hours and verifying the new cell design. TWs test, in turn, provided the confidence to proceed to a 100-kW demonstration which is the goal of the subsequent DOE program. The scaleup and stack verification tests are discussed in Sections 3, 4, 5, and 6 of this report.

  19. SURFACTANT SPRAY: A NOVEL TECHNOLOGY TO IMPROVE FLOTATION DEINKING PERFORMANCE

    Energy Technology Data Exchange (ETDEWEB)

    Yulin Deng; Junyong Zhu

    2004-01-31

    Based on the fundamental understanding of ink removal and fiber loss mechanism in flotation deinking process, we developed this innovative technology using surfactant spray to improve the ink removal efficiency, reduce the water and fiber loss, reduce the chemical consumption and carry over in the flotation deinking. The innovative flotation deinking process uses a spray to deliver the frothing agent during flotation deinking to control several key process variables. The spray can control the foam stability and structure and modify the fluid dynamics to reduce the fibers entrapped in the froth layer. The froth formed at the top part of the flotation column will act as a physical filter to prevent the penetration of frothing agent into the pulp suspension to eliminate fiber contamination and unfavorable deinking surface chemistry modification due to surfactant adsorption on the fiber surface. Because of the filter effect, frothing agents will be better utilized. Under the sponsorships of the US Dept. of Energy (DOE) and the member companies of the Institute of Paper Science and Technology, we studied the chem-mechanical mechanism of surfactant spray for flotation deinking using different furnishes, chemicals, and flotation devices in the past four years. In the final year of the project, we successfully conducted mill trials at Abitibi-Consolidated, Inc., Snowflake paper recycling operation of 100% mixture of ONP/OMG. Results from laboratory, pilot-plant and mill trials indicated that surfactant spray technology can significantly reduce fiber loss in flotation deinking. It can be concluded that paper industry can profit greatly when this technology is commercialized in flotation deinking mills.

  20. Membrane technology in production of biofuels : tried-and-tested technology improves new biofuel processes

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2010-07-15

    Membrane filtration technology, long used in many industrial process streams, is now being adopted in biofuels production and integrated biorefineries, particularly in second generation cellulosic ethanol processes. Second-generation bio-ethanol processes seek to optimize fuel recovery and secondary products from the feedstock and obtain a better value fuel. Membranes are being used to improve bioprocesses, lower energy costs, and increase product recovery. Membranes are engineered physical barriers used in processes for liquid/liquid and liquid/solid separation, permitting the passage of materials only up to a certain size, shape, or character. In biodiesel processes, membranes are being increasingly used to facilitate water reuse. The technology is being explored for use in the production of organic acids, which can form the base for biodegradable plastics. Integrated biorefineries are using microfiltration, ultrafiltration, nanofiltration, and reverse osmosis. Membranes are being used in fermentation with mesophilic and thermophilic organisms to produce biofuels and organic and amino acids. Membrane technology is low cost relative to using evaporators for recovering or removing water, and it is promising for continuous fermentation, as it helps retain microbial biomass in the fermenter while allowing liquid to be drawn out continuously. Membrane technology developed for use at wastewater treatment plants is being applied in biodiesel production, which produces wash water that is high in contaminants. Membrane technology is part of a wave of biofuel research and demonstration plants.

  1. Technology assessment in Australia : the case for a formal agency to improve advice to policy makers

    NARCIS (Netherlands)

    Russell, A. Wendy; Vanclay, Frank M.; Salisbury, Janet G.; Aslin, Heather J.

    The pace and reach of technological change has led to calls for better technology policy and governance to improve social outcomes. Technology assessment can provide information and processes to improve technology policy. Having conducted a review of international best practice, we established a set

  2. Zero tillage: A potential technology to improve cotton yield

    Directory of Open Access Journals (Sweden)

    Abbas Hafiz Ghazanfar

    2016-01-01

    Full Text Available Zero tillage technology revealed with no use of any soil inverting technique to grow crops. The crop plant seed is planted in the soil directly after irrigation to make the soil soft without any replenishing in soil layers. A study was conducted to evaluate cotton genotypes FH-114 and FH-142 for the consecutive three years of growing seasons from 2013-15. The seed of both genotypes was sown with two date of sowing, 1 March and 1 May of each three years of sowing under three tillage treatments (zero tillage, minimum tillage and conventional tillage in triplicate completely randomized split-split plot design. It was found from results that significant differences were recorded for tillage treatments, date of sowing, genotypes and their interactions. Multivariate analysis was performed to evaluate the yield and it attributed traits for potential of FH-114 and FH-142 cotton genotypes. The genotype FH-142 was found with higher and batter performance as compared to FH-114 under zero tillage, minimum tillage and conventional tillage techniques. The traits bolls per plant, boll weight, fibre fineness, fibre strength, plant height, cotton yield per plant and sympodial branches per plant were found as most contributing traits towards cotton yield and production. It was also found that FH-142 gives higher output in terms of economic gain under zero tillage with 54% increase as compared to conventional tillage technique. It was suggested that zero tillage technology should be adopted to improve cotton yield and quality. It was also recommended that further study to evaluate zero tillage as potential technology should be performed with different regions, climate and timing throughout the world.

  3. Novel chip coating approaches to improve white LED technology

    Science.gov (United States)

    Hartmann, Paul; Schweighart, Marko; Sommer, Christian; Wenzl, Franz-P.; Zinterl, Ernst; Hoschopf, Hans; Pachler, Peter; Tasch, Stefan

    2008-02-01

    Key market requirements for white LEDs, especially in the general lighting and automotive headlamp segments call for improved concepts and performance of white LEDs based on phosphor conversion. Major challenges are small emission areas, highest possible intensities, long-term color stability, and spatial homogeneity of color coordinates. On the other hand, the increasingly high radiation power of the blue LEDs poses problems for all involved materials. Various thick film coating technologies are widely used for applying the color conversion layer to the semiconductor chip. We present novel concepts based on Silicate phosphors with high performance in terms of spatial homogeneity of the emission and variability of the color temperature. Numerical calculation of the optical properties with the help of state-of-the-art simulation tools was used as a basis for the practical optimization of the layer geometries.

  4. Reforming Technologies to Improve the Performance of Combustion Systems

    Directory of Open Access Journals (Sweden)

    Hashim Hassan

    2014-09-01

    Full Text Available A large number of theoretical and experimental studies have shown that the performance of kerosene combustion increases significantly if combustion is being assisted by the addition of hydrogen to the fuel/air mixture during the combustion process. It reduces the amount of CO, CO2 and NOx emissions, while increasing the flame stability limits. It also helps in bruning fuel/air mixtures at much leaner equivalence ratios. The same principle could be applied to gain benefits in gas turbine combustors. Hydrogen for this purpose could be produced by the reforming of hydrocarbon fuels using a reformer module. This paper presents key hydrogen reforming technologies which, by implementation in gas turbine combustors, hold potential for improving both their performance and service life.

  5. Robotic joint replacement surgery: does technology improve outcomes?

    Science.gov (United States)

    Hill, Chelsea; El-Bash, Reem; Johnson, Leslie; Coustasse, Alberto

    2015-01-01

    Osteoarthritis is a common disease that leads patients to seek total joint replacement (TJR). Component misalignment leads to failure of TJR. Computer navigation enhances the precision of component alignment, but the addition of robotic guidance can boost TJR to a higher level of accuracy. Some 29 English-language peer-reviewed articles from 2002 to 2013 and 1 Web site were reviewed. A conceptual framework was adapted to explain benefits and barriers of adoption of robotic TJR. A total of 10 studies were reviewed with focus on more precise alignment, outcomes, length of stay, and costs. Cost to obtain robotic surgical equipment was found to be about $1 million with maintenance costs approaching $350 000. Robotic techniques compared with conventional orthopedic surgery showed slight variances in favor of robotic procedures. Although hospitals have the potential to reduce costs and improve outcomes with robotic TJR, the expenditure and maintenance have not been proven a clear return on investment. As surgical robotic technology evolves in accuracy and accessibility, joint replacement surgery may benefit from improved precision and decreased health care costs. However, equipment purchase and upkeep costs and surgeon training may impede use to its full potential in orthopedic surgery in the United States.

  6. IMPROVING THE QUALITY OF MAINTENANCE PROCESSES USING INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Zora Arsovski

    2008-06-01

    Full Text Available In essence, process of maintaining equipment is a support process, because it indirectly contributes to operational ability of the production process necessary for the supply chain of the new value. Taking into account increased levels of automatization and quality, this proces s becomes more and more significant and for some branches of industry, even crucial. Due to the fact that the quality of the entire process is more and more dependent on the maintenance process, these processes must be carefully designed and effectively im plemented. There are various techniques and approaches at our disposal, such as technical, logistical and intensive application of the information - communication technologies. This last approach is presented in this work. It begins with organizational goa ls, especially quality objectives. Then, maintenance processes and integrated information system structures are defined. Maintenance process quality and improvement processes are defined using a set of performances, with a special emphasis placed on effectiveness and quality economics. At the end of the work, information system for improving maintenance economics is structured. Besides theoretical analysis, work also presents results authors obtained analyzing food industry, metal processing industry an d building materials industry.

  7. We Brought Teachers Up to Snuff, And So Can You.

    Science.gov (United States)

    Jacobson, William C.

    1984-01-01

    The Cedar Rapids, Iowa, Plan for Instructional Improvement requires principals to take part in several workshops and activities to learn how to analyze what goes on in the classroom. Principals then direct teacher inservice training by conducting staff meetings, small seminars, and classroom observation followed by teacher conferences. (MLF)

  8. Improved understanding of hyperaccumulation yields commercial phytoextraction and phytomining technologies.

    Science.gov (United States)

    Chaney, Rufus L; Angle, J Scott; Broadhurst, C Leigh; Peters, Carinne A; Tappero, Ryan V; Sparks, Donald L

    2007-01-01

    This paper reviews progress in phytoextraction of soil elements and illustrates the key role of hyperaccumulator plant species in useful phytoextraction technologies. Much research has focused on elements which are not practically phytoextracted (Pb); on addition of chelating agents which cause unacceptable contaminant leaching and are cost prohibitive; and on plant species which offer no useful phytoextraction capability (e.g., Brassica juncea Czern). Nickel phytoextraction by Alyssum hyperaccumulator species, which have been developed into a commercial phytomining technology, is discussed in more detail. Nickel is ultimately accumulated in vacuoles of leaf epidermal cells which prevents metal toxicity and provides defense against some insect predators and plant diseases. Constitutive up-regulation of trans-membrane element transporters appears to be the key process that allows these plants to achieve hyperaccumulation. Cadmium phytoextraction is needed for rice soils contaminated by mine wastes and smelter emissions with 100-fold more soil Zn than Cd. Although many plant species can accumulate high levels of Cd in the absence of Zn, when Cd/Zn>100, only Thlaspi caerulescens from southern France has demonstrated the ability to phytoextract useful amounts of Cd. Production of element-enriched biomass with value as ore or fertilizer or improved food (Se) or feed supplement may offset costs of phytoextraction crop production. Transgenic phytoextraction plants have been achieved for Hg, but not for other elements. Although several researchers have been attempting to clone all genes required for effective hyperaccumulation of several elements, success appears years away; such demonstrations will be needed to prove we have identified all necessary processes in hyperaccumulation.

  9. Improving radiopharmaceutical supply chain safety by implementing bar code technology.

    Science.gov (United States)

    Matanza, David; Hallouard, François; Rioufol, Catherine; Fessi, Hatem; Fraysse, Marc

    2014-11-01

    The aim of this study was to describe and evaluate an approach for improving radiopharmaceutical supply chain safety by implementing bar code technology. We first evaluated the current situation of our radiopharmaceutical supply chain and, by means of the ALARM protocol, analysed two dispensing errors that occurred in our department. Thereafter, we implemented a bar code system to secure selected key stages of the radiopharmaceutical supply chain. Finally, we evaluated the cost of this implementation, from overtime, to overheads, to additional radiation exposure to workers. An analysis of the events that occurred revealed a lack of identification of prepared or dispensed drugs. Moreover, the evaluation of the current radiopharmaceutical supply chain showed that the dispensation and injection steps needed to be further secured. The bar code system was used to reinforce product identification at three selected key stages: at usable stock entry; at preparation-dispensation; and during administration, allowing to check conformity between the labelling of the delivered product (identity and activity) and the prescription. The extra time needed for all these steps had no impact on the number and successful conduct of examinations. The investment cost was reduced (2600 euros for new material and 30 euros a year for additional supplies) because of pre-existing computing equipment. With regard to the radiation exposure to workers there was an insignificant overexposure for hands with this new organization because of the labelling and scanning processes of radiolabelled preparation vials. Implementation of bar code technology is now an essential part of a global securing approach towards optimum patient management.

  10. Projects to improve mathematics performance at a university of technology

    Directory of Open Access Journals (Sweden)

    Ina Louw

    2009-09-01

    Full Text Available Lecturers at tertiary institutions have been expressing concern about the quality of students in mathematics for a long time now. Blame is usually placed at the door of secondary schools, but through put figures are still determining state subsidies and as such necessitate institutions to constantly revisit their efforts in terms of improving performance in mathematics. In this article, the results of two studies to improve the mathematics performance at a technical university are reported. The first study took place at the former Technikon Northern Gauteng and was an action research project with an experimental design. The study entailed the implementation of tutorial sessions and it revealed certain traits of tertiary mathematics education. Data were collected through structured observation, questionnaires and focus group interviews. A standardized questionnaire, Study Orientation Questionnaire in Maths (SOM, was introduced and “study habits” was the field in the test that featured most significantly in both the experimental and the control groups. The results revealed, inter alia, that timely assessment is needed to detect and correct misconceptions as soon as possible. It also pointed out that attendance of lectures (and tutorials impacted strongly on performance. Lastly, it was found that students preferred communicating mathematics through the medium of English and not by using their mother tongue. The second project was conducted at the Tshwane University of Technology (TUT and consisted of an investigation into assessment practices in first year mathematics. The study was executed with action research as strategy and data were collected through interviews, questionnaires and focus group interviews. Qualitative and quantitative data were collected and respondents were exposed to contemporary assessment strategies as suggested by OBE. The aim of the study was to enhance the respondents’ insight into contemporary assessment

  11. ON IMPROVING THE QUALITY OF VOCATIONAL AND TECHNOLOGICAL TRAINING OF FUTURE TEACHERS OF TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    O. V. SIDOROV

    2016-01-01

    Full Text Available The article is devoted to improving the content of vocational and technological and methodical preparation of the future teachers of technology. The author tells the technology training of students of electro- physical and electrochemical methods of processing of construction materials, which utilizes the integration of natural sciences, engineering and technological disciplines, developed using the existing set of teaching and laboratory facilities. Settings allow students to study the complex physical processes experimental study of the problem. The paper also shows a feature of the organization of a laboratory practical work in the form of educational and research work of students, to teach them to perform the volume of independent work using scientific methods of theoretical and experimental studies. The role of these methods is important for the development of creative thinking of students, forming engineering design knowledge and skills, as well as the skills of independent research, which provides, in turn, higher cognitive and creative activity of students. The author presents the results of his pedagogical experiment. Thus, the introduction in the educational process UIRS going involvement of students in research work, which becomes an important part in the preparation of research methodology equips their scientific and technical thinking, develops an interest in creativity, it helps provide them with in-depth knowledge, and the ability to apply them in practice. The research work of students includes research activities not only in the educational process, but also to participate in the circles of the department in the scientific work of the laboratory.

  12. Improving K-12 STEM Education Outcomes through Technological Integration

    Science.gov (United States)

    Urban, Michael J., Ed.; Falvo, David A., Ed.

    2016-01-01

    The application of technology in classroom settings has equipped educators with innovative tools and techniques for effective teaching practice. Integrating digital technologies at the elementary and secondary levels helps to enrich the students' learning experience and maximize competency in the areas of science, technology, engineering, and…

  13. [A gambir recipe brought by Ganjin, a Chinese buddhist dignitary].

    Science.gov (United States)

    Sugiyama, Shigeru

    2005-01-01

    It was customary both in China and Japan to serve medicinal teas before banquets, to which various spices and herbs including gambir, agalloch, and Saussureae radix were added, for the purpose of preparing the guest's physical condition before serving soups and entrees. Such medicinal teas were used as all-purpose remedies to cure upset stomach, intestinal disorders, bad temper, or melancholy. The author believes such usefulness is still valid even today, representing a gift introduced to Japan by Gangin. Gambir is sometimes substituted for tea in recipes; for example in Hoshintan from Kanazawa, but the reason for this is unclear now. Gambir was imported to Japan, as evidenced by an entry in a Japanese-Portuguese dictionary published in the 1590s in which gambir is referred to as "cacho" (cashew). At any rate, it is certain the recipe containing gambir, which Ganjin introduced to Japan, has helped improve people's health for 1,300 years.

  14. Improving measurement technology for the design of sustainable cities

    Science.gov (United States)

    Pardyjak, Eric R.; Stoll, Rob

    2017-09-01

    This review identifies and discusses measurement technology gaps that are currently preventing major science leaps from being realized in the study of urban environmental transport processes. These scientific advances are necessary to better understand the links between atmospheric transport processes in the urban environment, human activities, and potential management strategies. We propose that with various improved and targeted measurements, it will be possible to provide technically sound guidance to policy and decision makers for the design of sustainable cities. This review focuses on full-scale in situ and remotely sensed measurements of atmospheric winds, temperature, and humidity in cities and links measurements to current modeling and simulation needs. A key conclusion of this review is that there is a need for urban-specific measurement techniques including measurements of highly-resolved three-dimensional fields at sampling frequencies high enough to capture small-scale turbulence processes yet also capable of covering spatial extents large enough to simultaneously capture key features of urban heterogeneity and boundary layer processes while also supporting the validation of current and emerging modeling capabilities.

  15. Vibrating membrane filtration as improved technology for microalgae dewatering.

    Science.gov (United States)

    Nurra, Claudia; Clavero, Ester; Salvadó, Joan; Torras, Carles

    2014-04-01

    The effect of shear-enhanced filtration by vibratory process in microalgae dewatering is presented in this paper. The aim of this research was to investigate the technical performance and improvement of vibrating membrane filtration compared with conventional tangential cross-flow filtration in microalgae concentration. An industrial-scale available commercial set-up was used. Several membrane materials as polyethersulfone, polyacrylonitrile, etc., and mean pore sizes (from 7000Da to 0.2μm) were tested and compared in both filtration set-ups. Experiments were carried-out with Nannochloropsis gaditana and Phaeodactylum tricornutum microalgae. It has been demonstrated that, even if the choice of the membrane depends on its cut-off, its material and the type of microalgae filtrated, dynamic filtration is always the best technology over a conventional one. If with conventional filtration permeability values were in the vicinity of 10L/h/m(2)/bar in steady state phase, with dynamic filtration these values increased to 30L/h/m(2)/bar or more.

  16. Improved Technologies for Decontamination of Crated Large Metal Objects

    Energy Technology Data Exchange (ETDEWEB)

    McFee, J.; Barbour, K.; Stallings, E.

    2003-02-25

    The Los Alamos Large Scale Demonstration and Deployment Project (LSDDP) in support of the US Department of Energy (DOE) Deactivation and Decommissioning Focus Area (DDFA) has been identifying and demonstrating technologies to reduce the cost and risk of management of transuranic element contaminated large metal objects, i.e. gloveboxes. DOE must dispose of hundreds of gloveboxes from Rocky Flats Environmental Technology Site (RFETS), Los Alamos National Laboratory (LANL), and other DOE sites. This paper reports on the results of four technology demonstrations on decontamination of plutonium contaminated gloveboxes with each technology compared to a common baseline technology, wipedown with nitric acid.

  17. Recovery Act: Electrochromic Glazing Technology: Improved Performance, Lower Price

    Energy Technology Data Exchange (ETDEWEB)

    Burdis, Mark; Sbar, Neil

    2012-06-30

    The growing dependency of the US on energy imports and anticipated further increases in energy prices reinforce the concerns about meeting the energy demand in the future and one element of a secure energy future is conservation. It is estimated that the buildings sector represents 40% of the US's total energy consumption. And buildings produce as much as one third of the greenhouse gas emissions primarily through fossil fuel usage during their operational phase. A significant fraction of this energy usage is simply due to inefficient window technology. Electrochromic (EC) windows allow electronic control of their optical properties so that the transparency to light can be adjusted from clear to dark. This ability to control the amount of solar energy allowed into the building can be advantageously used to minimize lighting, heating and air conditioning costs. Currently, the penetration of EC windows into the marketplace is extremely small, and consequently there is a huge opportunity for energy savings if this market can be expanded. In order to increase the potential energy savings it is necessary to increase the quantity of EC windows in operation. Additionally, any incremental improvement in the energy performance of each window will add to the potential energy savings. The overall goals of this project were therefore to improve the energy performance and lower the cost of dynamic (EC) smart windows for residential and commercial building applications. This project is obviously of benefit to the public by addressing two major areas: lowering the cost and improving the energy performance of EC glazings. The high level goals for these activities were: (i) to improve the range between the clear and the tinted state, (ii) reduce the price of EC windows by utilizing lower cost materials, (iii) lowering the U-Value1 SAGE Electrochromics Inc. is the only company in the US which has a track record of producing EC windows, and presently has a small operational

  18. Recovery Act: Electrochromic Glazing Technology: Improved Performance, Lower Price

    Energy Technology Data Exchange (ETDEWEB)

    Burdis, Mark; Sbar, Neil

    2012-06-30

    The growing dependency of the US on energy imports and anticipated further increases in energy prices reinforce the concerns about meeting the energy demand in the future and one element of a secure energy future is conservation. It is estimated that the buildings sector represents 40% of the US's total energy consumption. And buildings produce as much as one third of the greenhouse gas emissions primarily through fossil fuel usage during their operational phase. A significant fraction of this energy usage is simply due to inefficient window technology. Electrochromic (EC) windows allow electronic control of their optical properties so that the transparency to light can be adjusted from clear to dark. This ability to control the amount of solar energy allowed into the building can be advantageously used to minimize lighting, heating and air conditioning costs. Currently, the penetration of EC windows into the marketplace is extremely small, and consequently there is a huge opportunity for energy savings if this market can be expanded. In order to increase the potential energy savings it is necessary to increase the quantity of EC windows in operation. Additionally, any incremental improvement in the energy performance of each window will add to the potential energy savings. The overall goals of this project were therefore to improve the energy performance and lower the cost of dynamic (EC) smart windows for residential and commercial building applications. This project is obviously of benefit to the public by addressing two major areas: lowering the cost and improving the energy performance of EC glazings. The high level goals for these activities were: (i) to improve the range between the clear and the tinted state, (ii) reduce the price of EC windows by utilizing lower cost materials, (iii) lowering the U-Value1 SAGE Electrochromics Inc. is the only company in the US which has a track record of producing EC windows, and presently has a small operational

  19. Continued SOFC cell and stack technology and improved production methods

    Energy Technology Data Exchange (ETDEWEB)

    Wandel, M.; Brodersen, K.; Phair, J. (and others)

    2009-05-15

    Within this project significant results are obtained on a number of very diverse areas ranging from development of cell production, metallic creep in interconnect to assembling and test of stacks with foot print larger than 500 cm2. Out of 38 milestones 28 have been fulfilled and 10 have been partly fulfilled. This project has focused on three main areas: 1) The continued cell development and optimization of manufacturing processes aiming at production of large foot-print cells, improving cell performance and development environmentally more benign production methods. 2) Stack technology - especially stacks with large foot print and improving the stack design with respect to flow geometry and gas leakages. 3) Development of stack components with emphasis on sealing (for 2G as well as 3G), interconnect (coat, architecture and creep) and test development. Production of cells with a foot print larger than 500 cm2 is very difficult due to the brittleness of the cells and great effort has been put into this topic. Eight cells were successfully produced making it possible to assemble and test a real stack thereby giving valuable results on the prospects of stacks with large foot print. However, the yield rate is very low and a significant development to increase this yield lies ahead. Several lessons were learned on the stack level regarding 'large foot print' stacks. Modelling studies showed that the width of the cell primarily is limited by production and handling of the cell whereas the length (in the flow direction) is limited by e.g. pressure drop and necessary manifolding. The optimal cell size in the flow direction was calculated to be between approx20 cm and < 30 cm. From an economical point of view the production yield is crucial and stacks with large foot print cell area are only feasible if the cell production yield is significantly enhanced. Co-casting has been pursued as a production technique due to the possibilities in large scale production

  20. Next Generation Surfactants for Improved Chemical Flooding Technology

    Energy Technology Data Exchange (ETDEWEB)

    Laura Wesson; Prapas Lohateeraparp; Jeffrey Harwell; Bor-Jier Shiau

    2012-05-31

    The principle objective of this project was to characterize and test current and next generation high performance surfactants for improved chemical flooding technology, focused on reservoirs in the Pennsylvanian-aged (Penn) sands. In order to meet this objective the characteristic curvatures (Cc) of twenty-eight anionic surfactants selected for evaluation for use in chemical flooding formulations were determined. The Cc values ranged from -6.90 to 2.55 with the majority having negative values. Crude oil samples from nine Penn sand reservoirs were analyzed for several properties pertinent to surfactant formulation for EOR application. These properties included equivalent alkane carbon numbers, total acid numbers, and viscosity. The brine samples from these same reservoirs were analyzed for several cations and for total dissolved solids. Surfactant formulations were successfully developed for eight reservoirs by the end of the project period. These formulations were comprised of a tertiary mixture of anionic surfactants. The identities of these surfactants are considered proprietary, but suffice to say the surfactants in each mixture were comprised of varying chemical structures. In addition to the successful development of surfactant formulations for EOR, there were also two successful single-well field tests conducted. There are many aspects that must be considered in the development and implementation of effective surfactant formulations. Taking into account these other aspects, there were four additional studies conducted during this project. These studies focused on the effect of the stability of surfactant formulations in the presence of polymers with an associated examination of polymer rheology, the effect of the presence of iron complexes in the brine on surfactant stability, the potential use of sacrificial agents in order to minimize the loss of surfactant to adsorption, and the effect of electrolytes on surfactant adsorption. In these last four studies

  1. Novel technologies to improve the performance of biomass pyrolsis systems

    Science.gov (United States)

    Liaw, Shi-Shen

    Biomass pyrolysis is a thermochemical conversion process to convert lignocellosic materials into bio-oil, gas, and char. The bio-oil can be further refined to produce transportation fuels, high-value chemicals and heat. Although fast pyrolysis is a very promising technology for high bio-oil production yield, the reactors used have several technological problems that limit their future techno-economic viability. Current fast pyrolysis reactors use large quantities of carrier gas that reduce their thermal efficiency. The use of sand to accelerate heating rates results in serious attrition problems responsible for sand contamination of the bio-char produced. Most of the fast pyrolysis reactors currently used need to process very small particles which consume large quantities of energy in grinding. The bio-oil produced is also highly acidic and corrosive mainly due to the presence of acetic acid. The lack of a viable technology to use the acetic acid contained in these oils is a major challenge for the development of viable bio-oil refineries. The objective of this dissertation is to evaluate several technologies to improve the techno-economic viability of biomass pyrolysis systems. The main hypotheses of this dissertation are: (1) high yields of bio-oils could also be obtained by using auger pyrolysis reactors using very low volumes of carried gas and no sand as a heat carrier if the system is fed with very small particles (2) The grinding energy can be reduced if the biomass is torrefied. There are torrefaction conditions that will not affect the overall yield of pyrolysis products (3) Acetic acid produced during pyrolysis can be removed with the use of a fractional condensation system (4) The acids produced during the torrefaction and pyrolysis with the use of the fractional condensation system can be anaerobically digested to produce methane. In this dissertation, it was proved through Py-GC/MS studies that yield of most of the pyrolytic products can be explained

  2. Identifying Our Approaches to Language Learning Technologies: Improving Professional Development

    Science.gov (United States)

    Petrie, Gina Mikel; Avery, Lisa

    2011-01-01

    The mid- to late 1990s was an exciting time for those concerned with incorporating new technology into their teaching of English as a second or foreign language (ESL/EFL). Commonly referred to as Computer-Assisted Language Learning (CALL), or sometimes with the broader term Technology-Enhanced Language Learning (TELL), the field took huge leaps…

  3. Technology Integration for Instructional Improvement: The Impact of Professional Development

    Science.gov (United States)

    Potter, Stephanie L.; Rockinson-Szapkiw, Amanda J.

    2012-01-01

    Technology purchased for use in the classroom often goes unused. We identify a primary reason for the lack of technology integration as ineffectively developed professional development opportunities for teachers. Then we recommend a sustained, administrative-supported and mentor-supported approach to professional development as an alternative to…

  4. Improving early cycle economic evaluation of diagnostic technologies

    NARCIS (Netherlands)

    Steuten, Lotte M.G.; Ramsey, Scott D.

    2014-01-01

    The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to increa

  5. Ethical analysis to improve decision-making on health technologies

    DEFF Research Database (Denmark)

    Saarni, Samuli I; Hofmann, Bjørn; Lampe, Kristian

    2008-01-01

    beyond effectiveness and costs to also considering the social, organizational and ethical implications of technologies. However, a commonly accepted method for analysing the ethical aspects of health technologies is lacking. This paper describes a model for ethical analysis of health technology......Health technology assessment (HTA) is the multidisciplinary study of the implications of the development, diffusion and use of health technologies. It supports health-policy decisions by providing a joint knowledge base for decision-makers. To increase its policy relevance, HTA tries to extend...... that is easy and flexible to use in different organizational settings and cultures. The model is part of the EUnetHTA project, which focuses on the transferability of HTAs between countries. The EUnetHTA ethics model is based on the insight that the whole HTA process is value laden. It is not sufficient...

  6. Process improvement technology for petrochemical plant; Sekiyu kagaku puranto ni okesu purosesu kaizen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Shin

    1999-05-05

    Before, GTC technology Co. was a manufacturer of the tray as a Greenwich technology. It is the subsidiary, which undertakes technology and licence of the engineering firm in U.S.A. at present. It carries out besides the technology licence support in the startup for the prolonged driving of technical service, operating condition of the plant of improvement and optimization and, etc. Has made separation and purification technology, which made extractive distillation to be a beginning good and has the process improvement technology to the PTA (high-pure terephthalic acid) from BTX (benzene toluene xylene) of petrochemical plant. (NEDO)

  7. Fusion of Hurricane Models and Observations: Developing the Technology to Improve the Forecasts Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop the technology to provide the fusion of observations and operational model simulations to help improve the understanding and forecasting of hurricane...

  8. Coupling new technologies and methodologies for performance improvement.

    Science.gov (United States)

    Monge, Paul

    2007-01-01

    Radiology is a pivotal part of the patient's experience within a healthcare organization and has traditionally embraced new technologies. It is now time to embrace new management methodologies. With the changing winds in reimbursement, activity-based methods (ABC and ABM) will assist us to maximize our resources, reduce costs, and increase our efficiencies to maintain the quality of care. We have embraced new technologies, but we have implemented them on top of old processes. Without embracing new methodologies we may never maximize our new technology.

  9. Smart Door Lock System: Improving Home Security using Bluetooth Technology

    National Research Council Canada - National Science Library

    Jayant Dabhade; Amirush Javare; Tushar Ghayal; Ankur Shelar; Ankita Gupta

    2017-01-01

      In today's world, smart home control system is necessary in daily life. As the technology is emerging a lot it's time for us to be more technical related to home secure security and easy access to the user...

  10. HPCC technology awareness program: Improved economic competitiveness through technology awareness, transfer and application. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    A need has been defined by Congress for the DOE National Laboratories to participate in various dual use and technology transfer programs. This requirement has spawned several technology transfer approaches at the DOE laboratories. These programs are designed to encourage large and small business to bring their problems and needs forward, and to allow the labs to transfer effective high performance computing technology to the commercial marketplace. This IG Technologies grant from the DOE was undertaken to address the issues and problems associated with technology transfer between the DOE National Laboratories and commercial industry. The key focus is to gain an understanding of how DOE and industry independently and collectively view the requirements and the missing elements that could allow DOE to facilitate HPCC technology transfer. At issue is HPCC Technology Transfer for the High Performance Computing industry and its relationship to the DOE National Laboratories. Several observations on this are addressed. The issue of a ``Technology Utilization Gap`` between the National Laboratories and Independent Software Vendors is discussed. This study addressed the HPCC Technology Transfer plans of all six DOE National Labs. Study team members briefed numerous industrial users of HPCC technology as to the feasibility of technology transfer for various applications. Significant findings of the effort are that the resistance to technology transfer is much higher than anticipated for both the National Labs and industry. Also, HPCC Technology Transfer is observed to be a large company`s dominion. Small businesses have a difficult time in addressing the requirements of technology transfer using Cooperative Research and Development Agreements (CRADA`s). Large businesses and the DOE National Labs however, often have requirements and objectives which are at cross purposes, making effective technology transfer difficult.

  11. Improving patient access to novel medical technologies in Europe.

    LENUS (Irish Health Repository)

    Kearney, Peter

    2012-02-03

    The European Society of Cardiology (ESC) organized a one-day workshop with clinicians, health economic experts, and health technology appraisal experts to discuss the equity of patient access to novel medical technologies in Europe. Two index technologies were considered: implantable cardioverter defibrillators (ICDs) and drug-eluting stents (DES). The use of ICDs range from 35 implants\\/million population in Portugal to 166 implants\\/million population in Germany, whereas for implants of DES (as percentage of total stents) it is lowest in Germany at 14% and high in Portugal at 65%. These differences can in part be explained by a lack of structured implementation of guidelines, the direct cost in relation to the overall healthcare budget, and to differences in procedures and models applied by Health Technology Assessment (HTA) agencies in Europe. The workshop participants concluded that physicians need to be involved in a more structured way in HTA and need to become better acquainted with its methods and terminology. Clinical guidelines should be systematically translated, explained, disseminated, updated, and adopted by cardiologists in Europe. Clinically appropriate, consistent and transparent health economic models need to be developed and high-quality international outcome and cost data should be used. A process for funding of a technology should be developed after a positive recommendation from HTA agencies. Both the ESC and the national cardiac societies should build-up health economic expertise and engage more actively in discussions with stakeholders involved in the provision of healthcare.

  12. Improving network service performance and reliability via links trunking technologies

    Institute of Scientific and Technical Information of China (English)

    GUO Hui; WANG Yun-peng; WANG Zhi-guang; ZHOU Jing-li

    2006-01-01

    With the increase ofhigh-speed network backbones, the performance of server's network interface gradually becomes a pivotal factor. This study provides a method called Ethernet Links Trunking (ELT) technology for achieving efficient connectivity between backbones and servers, which provides higher bandwidth and availability of server network interface. The overview of the ELT technology and the results of performance experiment are presented in this paper. Findings showed that the network bandwidth can be scaled by multiple ELT technologies so that more reliable network connectivity can be guaranteed. Some crucial techniques such as Adapter Load Balancing (ALB) and Adapter Fault Tolerance (AFT) are presented in this paper. Experimental results showed that parallel channels of Fast Ethernet are both necessary and sufficient for supporting the data rates of multiple concurrent file transfers on file server.

  13. Applying Sensor-Based Technology to Improve Construction Safety Management

    Science.gov (United States)

    Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

    2017-01-01

    Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions. PMID:28800061

  14. Applying Sensor-Based Technology to Improve Construction Safety Management.

    Science.gov (United States)

    Zhang, Mingyuan; Cao, Tianzhuo; Zhao, Xuefeng

    2017-08-11

    Construction sites are dynamic and complicated systems. The movement and interaction of people, goods and energy make construction safety management extremely difficult. Due to the ever-increasing amount of information, traditional construction safety management has operated under difficult circumstances. As an effective way to collect, identify and process information, sensor-based technology is deemed to provide new generation of methods for advancing construction safety management. It makes the real-time construction safety management with high efficiency and accuracy a reality and provides a solid foundation for facilitating its modernization, and informatization. Nowadays, various sensor-based technologies have been adopted for construction safety management, including locating sensor-based technology, vision-based sensing and wireless sensor networks. This paper provides a systematic and comprehensive review of previous studies in this field to acknowledge useful findings, identify the research gaps and point out future research directions.

  15. 45 CFR 2554.20 - How are issues brought to the attention of the ALJ?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false How are issues brought to the attention of the ALJ? 2554.20 Section 2554.20 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION... § 2554.20 How are issues brought to the attention of the ALJ? (a) All applications to the ALJ for...

  16. TECHNOLOGICAL PROCESS MODELING AIMING TO IMPROVE ITS OPERATIONS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Ivan Mihajlović

    2011-11-01

    Full Text Available This paper presents the modeling procedure of one real technological system. In this study, thecopper extraction from the copper flotation waste generated at the Bor Copper Mine (Serbia, werethe object of modeling. Sufficient data base for statistical modeling was constructed using theorthogonal factorial design of the experiments. Mathematical model of investigated system wasdeveloped using the combination of linear and multiple linear statistical analysis approach. Thepurpose of such a model is obtaining optimal states of the system that enable efficient operationsmanagement. Besides technological and economical, ecological parameters of the process wereconsidered as crucial input variables.

  17. An Improved Processing Technology of Traditional Soybean Films

    Institute of Scientific and Technical Information of China (English)

    Jiang Yuanrong; Zhang Hui

    2002-01-01

    This paper studies on theprocessing technology of soybean films. Basedon thestatistical analysis of the traditionalsoybean films, two property indices weredetermined with Rheometer: Percent Elongation(PE) higher than 5.49%, Tensile Strength (TS)higher than 23.25 kg/cm2.As the examinedspecimen has 19.0±0.5% moisture. An improvedprocessing technology high yield of soybeanfilms was obtained. The new product has thenearly same or even higher nutrient content,property and structure as the traditional ones.The new product is consistent, flexible,smoothand transparent. The method offers morepromises for commercial-scale film production.

  18. Improving History Learning through Cultural Heritage, Local History and Technology

    Science.gov (United States)

    Magro, Graça; de Carvalho, Joaquim Ramos; Marcelino, Maria José

    2014-01-01

    History learning is many times considered dull and demotivating by young students. Probably this is due because the learning process is disconnected from these students' reality and experience. One possible way to overcome this state of matters is to use technology like mobile devices with georeferencing software and local history and heritage…

  19. Improving Technology Literacy: Does It Open Doors to Traditional Content?

    Science.gov (United States)

    Judson, Eugene

    2010-01-01

    This study investigated whether an identifiable link existed between gains in technology literacy and achievement in the areas of reading, mathematics, and language arts. Normal curve equivalent (NCE) content score changes from TerraNova assessments were calculated for approximately 5,000 students from fourth- to fifth-grade and 5,000 students…

  20. Improving the Manager’s Ability to Identify Alternative Technologies.

    Science.gov (United States)

    1980-03-01

    the purposes of this study. These terms are: Tecno ~i&X- the application of knowledge to perform work- L 2:531J Technolor-Y Transfer - stimulating or...Transfer, MET Press, 1969. 15. United States Government Manual , Government Printing Office, 1979. 16. Jolly, J. A., "Editorial", The Journal of Technology

  1. Using Semantic Web technologies to Improve Accesibility to SDI's

    NARCIS (Netherlands)

    Riviere, La I.J.; Lokers, R.M.; Ganzeveld, A.; Ligtenberg, A.; Bulens, J.D.

    2009-01-01

    In this paper we will focus on the use of semantic web technologies to support easy, user-oriented access to SDIs, and on the specific issues that occur because of the spatial nature of data. A key-register for the soil and subsurface domain is being set up to provide access to soil and subsurface d

  2. Improving University Students' Science-Technology-Society-Environment Competencies

    Science.gov (United States)

    Yalaki, Yalçin

    2016-01-01

    Science, Technology, Society, Environment (STSE) is an education movement that started and developed from 70s through early 2000s. Although this movement had lost emphasis in recent years, it is one of the most important educational reform attempts in science education history. Today, concepts like Socio Scientific Issues (SSI) or Science,…

  3. Improving Vocabulary Skills through Assistive Technology: Rick's Story

    Science.gov (United States)

    Lindsey-Glenn, Pam F.; Gentry, James E.

    2008-01-01

    This case study examines the use of two assistive technologies, the Franklin Language Master 6000b and Microsoft PowerPoint 2003, as visual support systems to aid in the vocabulary acquisition skills of a student with autism spectrum disorder (ASD). The intervention used children's literature and best practices in teaching vocabulary skills in…

  4. Healthcare technologies, quality improvement programs and hospital organizational culture in Canadian hospitals.

    Science.gov (United States)

    Tyagi, Rajesh K; Cook, Lori; Olson, John; Belohlav, James

    2013-10-13

    Healthcare technology and quality improvement programs have been identified as a means to influence healthcare costs and healthcare quality in Canada. This study seeks to identify whether the ability to implement healthcare technology by a hospital was related to usage of quality improvement programs within the hospital and whether the culture within a hospital plays a role in the adoption of quality improvement programs. A cross-sectional study of Canadian hospitals was conducted in 2010. The sample consisted of hospital administrators that were selected by provincial review boards. The questionnaire consisted of 3 sections: 20 healthcare technology items, 16 quality improvement program items and 63 culture items. Rasch model analysis revealed that a hierarchy existed among the healthcare technologies based upon the difficulty of implementation. The results also showed a significant relationship existed between the ability to implement healthcare technologies and the number of quality improvement programs adopted. In addition, culture within a hospital served a mediating role in quality improvement programs adoption. Healthcare technologies each have different levels of difficulty. As a consequence, hospitals need to understand their current level of capability before selecting a particular technology in order to assess the level of resources needed. Further the usage of quality improvement programs is related to the ability to implement technology and the culture within a hospital.

  5. Improved Filtration Technology for Pathogen Reduction in Rural Water Supplies

    Directory of Open Access Journals (Sweden)

    Valentine Tellen

    2010-06-01

    Full Text Available Intermittent bio-sand filtration (BSF is a low-cost process for improving water quality in rural households. This study addresses its two drawbacks: flow limitations requiring excessive waiting, and inadequate purification when high flows are imposed. Two modifications were examined: increasing the sand’s effective size, and adding zero-valent iron (ZVI into the media as a disinfectant. After 65 days, percent reductions in total coliform, fecal coliform, and fecal streptococci averaged 98.9% for traditional BSF and 99% for the improved BSF. Both modifications showed statistically significant improvements. Increased sand size and ZVI addition can counter the drawbacks of traditional BSF.

  6. Relativistic Quantum Metrology: Exploiting relativity to improve quantum measurement technologies

    CERN Document Server

    Ahmadi, Mehdi; Friis, Nicolai; Sabín, Carlos; Adesso, Gerardo; Fuentes, Ivette

    2013-01-01

    We present a framework for relativistic quantum metrology that is useful for both Earth-based and space-based technologies. Quantum metrology has been so far successfully applied to design precision instruments such as clocks and sensors which outperform classical devices by exploiting quantum properties. There are advanced plans to implement these and other quantum technologies in space, for instance Space-QUEST and Space Optical Clock projects intend to implement quantum communications and quantum clocks at regimes where relativity starts to kick in. However, typical setups do not take into account the effects of relativity on quantum properties. To include and exploit these effects, we introduce techniques for the application of metrology to quantum field theory (QFT). QFT properly incorporates quantum theory and relativity, in particular, at regimes where space-based experiments take place. This framework allows for high precision estimation of parameters that appear in QFT including proper times and acce...

  7. An Innovative Reactor Technology to Improve Indoor Air Quality

    Energy Technology Data Exchange (ETDEWEB)

    Rempel, Jane [TIAX LLC., Lexington, MA (United States)

    2013-03-30

    As residential buildings achieve tighter envelopes in order to minimize energy used for space heating and cooling, accumulation of indoor air pollutants such as volatile organic compounds (VOCs), becomes a major concern causing poor air quality and increased health risks. Current VOC removal methods include sorbents, ultraviolet photocatalytic oxidation (UVPCO), and increased ventilation, but these methods do not capture or destroy all VOCs or are prohibitively expensive to implement. TIAX's objective in this program was to develop a new VOC removal technology for residential buildings. This novel air purification technology is based on an innovative reactor and light source design along with UVPCO properties of the chosen catalyst to purify indoor air and enhance indoor air quality (IAQ). During the program we designed, fabricated and tested a prototype air purifier to demonstrate its feasibility and effectiveness. We also measured kinetics of VOC destruction on photocatalysts, providing deep insight into reactor design.

  8. Improving the Army’s Next Effort in Technology Forecasting

    Science.gov (United States)

    2010-09-01

    Cortisol Effects on Body Mass, Blood Pressure, and Cholesterol in the General Population,” Hypertension, 33 (1999), 1364–1368. 13 V. Technological...of HPA (hypothalamus-pituitary-adrenal) axis stress response hormones, notably cortisol and b-endorphin.62 These authors suggest that high hardy...stressors. In short, hardy individuals are more likely to remain emotionally stable during stressful situations. In support of this interpretation is

  9. Improved Construction of Auricular Prosthesis by Digital Technologies.

    Science.gov (United States)

    Nuseir, Amjad; Hatamleh, Muhanad; Watson, Jason; Al-Wahadni, Ahed M; Alzoubi, Firas; Murad, Mohammed

    2015-09-01

    Implant-retained auricular prostheses are a successful prosthetic treatment option for patients who are missing their ear(s) due to trauma, oncology, or birth defects. The prosthetic ear is aesthetically pleasing, composed of natural looking anatomical contours, shape, and texture along with good color that blends with surrounding existing skin. These outcomes can be optimized by the integration of digital technologies in the construction process. This report describes a sequential process of reconstructing a missing left ear by digital technologies. Two implants were planned for placement in the left mastoid region utilizing specialist biomedical software (Materialise, Belgium). The implant positions were determined underneath the thickest portion (of anti-helix area) left ear that is virtually simulated by means of mirror imaging of the right ear. A surgical stent recording the implant positions was constructed and used in implant fixtures placement. Implants were left for eight weeks, after which they were loaded with abutments and an irreversible silicone impression was taken to record their positions. The right existing ear was virtually segmented using the patient CT scan and then mirror imaged to produce a left ear, which was then printed using 3D printer (Z Corp, USA). The left ear was then duplicated in wax which was fitted over the defect side. Then, it was conventionally flasked. Skin color was digitalized using spectromatch skin color system (London, UK). The resultant silicone color was mixed as prescribed and then packed into the mold. The silicone was cured conventionally. Ear was trimmed and fitted and there was no need for any extrinsic coloring. The prosthetic ear was an exact match to the existing right ear in shape, skin color, and orientation due to the great advantages of technologies employed. Additionally, these technologies saved time and provided a base for reproducible results regardless of operator.

  10. Performance of Improved Dairy Cattle Technologies Among Farmers ...

    African Journals Online (AJOL)

    User

    In pastoral system dominated milk production in Nigeria, it still supplies considerable ... return of sales of dairy products and constraints encountered by dairy cattle .... to improve herd productivity is to cross local cows to the exotic bulls and/or.

  11. Information Technology (IT Improvement at PT Sumber Alfaria Trijaya

    Directory of Open Access Journals (Sweden)

    Marisa Karsen

    2013-05-01

    Full Text Available Retail industry is the second largest industry after agricultural industry in terms of employment absorption in Indonesia. The situation of the quite dynamic retail industry is marked by the development of modern retail trade and it impacts on traditional markets and suppliers. PT Sumber Alfaria Trijaya, known as Alfamart is one of the best retail company in Indonesia. It already uses Supply Chain Management and B2B to support their operations. Alfamart also has its own website which provides information about products, outlets, services, and promo. This research discusses about IT improvement. The purpose of this paper is to improve Alfamart IT performance and make innovation on the IT to increase customer satisfaction. The methodology used is defining the problem, measure, analyst problem, improvement required by Alfamart, and control to monitor the implementation. Problems are identified using SWOT analysis, problem clarification, and business model canvas. Analyzing the problems, solution hypotheses and IT improvement are recommended for Alfamart.

  12. Improvement Technology Classification and Composition in Multimodel Environments

    Science.gov (United States)

    2008-03-01

    others EFQM and others ISO 9001 , ISO 61508, ISO 16949, and others Improvement Method Elements Change management techniques: IDEAL, Six Sigma, Lean...about compliance based on mappings. For example, an ISO 9001 :2000 compliant practice that has been implemented in the organization’s process and...Practice Elements CMMI PAs and PLA ISO 15504 and ISO 12207 COBIT EFQM ISO 9001 Improvement Method Elements Change management techniques: IDEAL and Six

  13. The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems.

    Science.gov (United States)

    Lyon, Aaron R; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J; Unützer, Jürgen; McCauley, Elizabeth

    2016-05-01

    Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the contextualized technology adaptation process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians' workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors.

  14. Improvement of water desalination technologies in reverse osmosis plants

    Science.gov (United States)

    Vysotskii, S. P.; Konoval'chik, M. V.; Gul'ko, S. E.

    2017-07-01

    The strengthening of requirements for the protection of surface-water sources and increases in the cost of reagents lead to the necessity of using membrane (especially, reverse osmosis) technologies of water desalination as an alternative to ion-exchange technologies. The peculiarities of using reverse osmosis technologies in the desalination of waters with an increased salinity have been discussed. An analogy has been made between the dependence of the adsorptive capacity of ion-exchange resins on the reagent consumption during ion exchange and the dependence of the specific ion flux on the voltage in the electrodialysis and productivity of membrane elements on the excess of the pressure of source water over the osmotic pressure in reverse osmosis. It has been proposed to regulate the number of water desalination steps in reverse osmosis plants, which makes it possible to flexibly change the productivity of equipment and the level of desalinization, depending on the requirements for the technological process. It is shown that the selectivity of reverse osmotic membranes with respect to bivalent ions (calcium, magnesium, and sulfates) is approximately four times higher than the selectivity with respect to monovalent ions (sodium and chlorine). The process of desalination in reverse osmosis plants depends on operation factors, such as the salt content and ion composition of source water, the salt content of the concentrate, and the temperatures of solution and operating pressure, and the design features of devices, such as the length of the motion of the desalination water flux, the distance between membranes, and types of membranes and turbulators (spacers). To assess the influence of separate parameters on the process of reverse osmosis desalination of water solutions, we derived criteria equations by compiling problem solution matrices on the basis of the dimensional method, taking into account the Huntley complement. The operation of membrane elements was

  15. Pharmaceutical particle technologies: An approach to improve drug solubility, dissolution and bioavailability

    Directory of Open Access Journals (Sweden)

    Prakash Khadka

    2014-12-01

    Full Text Available Pharmaceutical particle technology is employed to improve poor aqueous solubility of drug compounds that limits in vivo bioavailability owing to their low dissolution rate in the gastrointestinal fluids following oral administration. The particle technology involves several approaches from the conventional size reduction processes to the newer, novel particle technologies that modify the solubility properties of the drugs and produce solid, powdered form of the drugs that are readily soluble in water and can be easily formulated into various dosage forms. This review highlights the solid particle technologies available for improving solubility, dissolution and bioavailability of drugs with poor aqueous solubility.

  16. Improving Technology Education: Understanding Reform--Assuming Responsibility.

    Science.gov (United States)

    Bybee, Rodger W.

    2003-01-01

    Presents a strategic framework for standards-based reform: (1) dissemination (develop awareness); (2) interpretation (increase understanding and support); (3) implementation (change policies, programs, and practices); (4) evaluation (monitor and adjust); and (5) revision (improve efficiency and influence of standards). Outlines roles for various…

  17. Recent Acquisition Reform Through Technology and Workforce Improvements

    Science.gov (United States)

    2016-09-01

    those risks. The initiative also 35 aims to “improve tradecraft in acquisition of services” through “adopting uniform services market segmentation ...reporting systems, increased certification and training requirements, changing demographics , including an aging workforce, reductions-in-force (RIF...producing; 2) availability of supplemental funding from Congress to pay for the requirement; 3) market research that showed proven, commercial

  18. Information Technology (IT Improvement At PT. Sumber Alfaria Trijaya

    Directory of Open Access Journals (Sweden)

    Marisa Karsen

    2013-06-01

    Full Text Available Retail industry is the second largest industry after agricultural industry in terms of employment absorption in Indonesia. The situation of the quite dynamic retail industry is marked by the development of modern retail trade and it impacts on traditional markets and suppliers. PT Sumber Alfaria Trijaya, known as Alfamart is one of the best retail company  in Indonesia. It already uses Supply Chain Management and B2B to support their operations. Alfamart also has its own website which provides information about products, outlets, services, and promo. This research discusses about IT improvement. The purpose of this paper is to improve Alfamart IT performance and make innovation on the IT to increase customer satisfaction.  The methodology used is defining the problem, measure, analyst problem, improvement required by Alfamart, and control to monitor the implementation. Problems are identified using SWOT analysis, problem clarification, and business model canvas. Analyzing the problems, solution hypotheses and IT improvement are recommended for Alfamart.  

  19. Preverbal Infants Anticipate that Food Will Be Brought to the Mouth: An Eye Tracking Study of Manual Feeding and Flying Spoons

    Science.gov (United States)

    Kochukhova, Olga; Gredeback, Gustaf

    2010-01-01

    This study relies on eye tracking technology to investigate how humans perceive others' feeding actions. Results demonstrate that 6-month-olds (n = 54) anticipate that food is brought to the mouth when observing an adult feeding herself with a spoon. Still, they fail to anticipate self-propelled (SP) spoons that move toward the mouth and manual…

  20. The Role of Emerging Technologies in Improving Energy Efficiency:Examples from the Food Processing Industry

    Energy Technology Data Exchange (ETDEWEB)

    Lung, Robert Bruce; Masanet, Eric; McKane, Aimee

    2006-05-01

    For over 25 years, the U.S. DOE's Industrial Technologies Program (ITP) has championed the application of emerging technologies in industrial plants and monitored these technologies impacts on industrial energy consumption. The cumulative energy savings of more than 160 completed and tracked projects is estimated at approximately 3.99 quadrillion Btu (quad), representing a production cost savings of $20.4 billion. Properly documenting the impacts of such technologies is essential for assessing their effectiveness and for delivering insights about the optimal direction of future technology research. This paper analyzes the impacts that several emerging technologies have had in the food processing industry. The analysis documents energy savings, carbon emissions reductions and production improvements and assesses the market penetration and sector-wide savings potential. Case study data is presented demonstrating the successful implementation of these technologies. The paper's conclusion discusses the effects of these technologies and offers some projections of sector-wide impacts.

  1. Improving America's health care system by investing in information technology.

    Science.gov (United States)

    Coye, Molly Joel; Bernstein, William S

    2003-01-01

    Large-scale investment in health care information technology (IT) infrastructure will not take place without leadership by the federal government. But how the federal government supports the financing of health care IT is critical. Health care IT development has multiple aspects, but it is fundamentally a problem of community infrastructure development. A policy approach that has had consistent success in financing our country's essential physical infrastructure in transportation and environmental protection will be well suited to fostering health care IT infrastructure as well. We propose the creation of a health care IT revolving loan fund program to invest public dollars in health care IT infrastructure projects through community-level nonprofit lending agencies.

  2. Improving productivity and reducing operating costs with fuel cell technology

    Energy Technology Data Exchange (ETDEWEB)

    Hoying, T. [Cellex Power Products Inc., Richmond, BC (Canada)

    2004-07-01

    This short corporate white paper addresses the advantages to fleet lift truck operators of converting to fuel cells from conventional electric battery technology. Conventional batteries are heavy for the energy they store. In addition, large operations require special equipment to change batteries, something that occurs at frequent intervals (4-8 hours). Some of the disadvantages of batteries include requirements such as an eye wash safety program, floor drainage for battery acid containment, and ventilation. The paper asserts that the larger the operation, the greater the problem of overall battery management. It cites the higher energy density of fuel cells as their prime advantage; fueling time is shorter than the time needed to change a battery, and times between refueling/changing is one and a half to two time greater for the fuel cell. In addition to the economic benefits of fuel cells, they do not produce harmful emissions.

  3. Current Technological Improvements in Enzymes toward Their Biotechnological Applications

    Science.gov (United States)

    Baweja, Mehak; Nain, Lata; Kawarabayasi, Yutaka; Shukla, Pratyoosh

    2016-01-01

    Enzymes from extremophiles are creating interest among researchers due to their unique properties and the enormous power of catalysis at extreme conditions. Since community demands are getting more intensified, therefore, researchers are applying various approaches viz. metagenomics to increase the database of extremophilic species. Furthermore, the innovations are being made in the naturally occurring enzymes utilizing various tools of recombinant DNA technology and protein engineering, which allows redesigning of the enzymes for its better fitment into the process. In this review, we discuss the biochemical constraints of psychrophiles during survival at the lower temperature. We summarize the current knowledge about the sources of such enzymes and their in vitro modification through mutagenesis to explore their biotechnological potential. Finally, we recap the microbial cell surface display to enhance the efficiency of the process in cost effective way. PMID:27379087

  4. Improving Drugs Administration Safety in Pediatric Resuscitation Using Mobile Technology.

    Science.gov (United States)

    Hagberg, Hamdi; Siebert, Johan; Gervaix, Alain; Daehne, Peter; Lovis, Christian; Manzano, Sergio; Ehrler, Frederic

    2016-01-01

    The fast preparation of drugs during pediatric resuscitation is of utmost importance. The influence of the patient's weight on the drug doses requires to perform complex calculations and is a source of errors. A technological solution could be a real help in avoiding these kinds of mistakes. Relying on a user centered approach we have developed an application supporting drug preparation. It has been tested in simulations with predefined scenario. The developed tool consists of a screen displaying a list of drug that can be administered. When the user select a drug, the instructions regarding its preparation are displayed with all dosage precisely calculated. The tool has demonstrated a significant reduction of errors associated to administration, a speeding up the overall process and has been well received by the nurses.

  5. The Integration of Nanoscale Techniques for an Improved Battery Technology

    Science.gov (United States)

    2012-06-08

    Maier et al [16-20] describe a phenomenon upon which lithium ions collect at phase boundaries, resulting in both battery and capacitor like...also have beneficial effect on stabilization. A hyperbranched polyester improved interfacial performance when compared with PEO alone [75...polymer are shown. Considering the polymer ion conduction to be described by an equivalent circuit composed of a capacitor and resistor in parallel

  6. Senior Project: Analysis and Improvement of Existing Apparel Technology

    Science.gov (United States)

    1991-09-10

    and improve the quality of the seam , the major cost centers - work in process, operator handlinq, and production control were left far behind. Was it...skilled operation when performed manually; the curve must be stitched without puckering or irregular stitches and the line must remain parallel to the...equipped with side seam expanders. In this plant the Ajax Presses had been modified with a spring I steel clamp on the back of the buck to secure the box

  7. Incentives and technologies for improving irrigation water use efficiency

    Science.gov (United States)

    Bruggeman, Adriana; Djuma, Hakan; Giannakis, Elias; Eliades, Marinos

    2014-05-01

    The European Water Framework Directive requires Member States to set water prices that provide adequate incentives for users to use water resources efficiently. These new water pricing policies need to consider cost recovery of water services, including financial, environmental and resource cost. Prices were supposed to have been set by 2010. So far the record has been mixed. The European Commission has sent reasoned opinions to a number of countries (Austria, Belgium, Denmark, Estonia, Finland, Germany, Hungary, Netherlands, Sweden) requesting them to adjust their national legislation to include all water services. Unbalanced water pricing may negatively affect the agricultural sector, especially in the southern EU countries, which are more dependent on irrigation water for production. The European Commission is funding several projects that aim to reduce the burden of increasing water prices on farmers by developing innovative technologies and decision support systems that will save water and increase productivity. The FP7 ENORASIS project (grant 282949) has developed a new integrated irrigation management decision support platform, which include high-resolution, ensemble weather forecasting, a GIS widget for the location of fields and sensors and a comprehensive decision support and database management software package to optimize irrigation water management. The field component includes wireless, solar-powered soil moisture sensors, small weather stations, and remotely controlled irrigation valves. A mobile App and a web-package are providing user-friendly interfaces for farmers, water companies and environmental consultants. In Cyprus, agricultural water prices have been set to achieve a cost recovery rate of 54% (2010). The pricing policy takes in consideration the social importance and financial viability of the agricultural sector, an important flexibility provided by the Water Framework Directive. The new price was set at 0.24 euro per m3 for water supply

  8. IMPROVING THE EFFICIENCY OF MINERAL WOOL SLABS TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Perfilov Vladimir Aleksandrovich

    2016-03-01

    Full Text Available The use of thermal insulation materials is an effective method to create an insulating envelope of a building, as well as to reduce energy costs and increase the durability of building structures. The properties of stone wool products and their operational durability is largely determined by the conditions of formation of the mineral wool carpet, uniform distribution of binder and its curing and the heat treatment conditions. Most domestic technologies are aimed at the production of mineral wool products with volume-oriented structure, which is formed using special units: spreader and corrugator placed in a production line. The next step to obtain the optimum structures is the production of dual density slabs. The denser upper layer receives mechanical loads caused by the operating conditions; the lower, less dense, but more thick layer performs the main function - insulation. The dual density slabs are produced on standard lines supplemented with a special unit, which is located in front of the heat treatment camera. Optimization of heat treatment parameters and prediction of the properties of materials is performed using software package.

  9. Improving the technology of deposition using strip electrode

    Directory of Open Access Journals (Sweden)

    Сергій Володимирович Гулаков

    2017-07-01

    Full Text Available The behavior of the arc at the strip electrode tip is studied. It is shown that the arc is moving along the electrode tip due to periodic short-circuits of the arc gap. Thus, a new arc is excited at the point where short circuit occurred after a conductive bridge formed by molten metal is vanished due to a high welding current. This leads to an increase in the probability of defect formation in the deposited layer of workpiece under treatment. To improve deposited layer quality, it is suggested to identify the moments of short-circuits of the electrode to the base metal and to discharge the pre-charged capacitorat these instants, connecting it between the electrode and the product. High discharge current pulse speeds up the destruction of the molten metal bridge between electrode tip and workpiece, thus lowering the time needed for arc re-ignition and improving depostion process stability. A special automated equipment has been developed to implement this process. Capacitor discharge is done using power thyristor with series-connected inductance for limiting discharging current rate of rise and for limiting discharge current peak value such that it is not impairing thyristor reliability. The pre-charging of the capacitor is done by an auxiliary power supply. Several thyristor-capacitor networks can be used in parallel to allow for multiple current pulses mode and to reduce RMS currents in capacitors

  10. Research and Technology Development for Genetic Improvement of Switchgrass

    Energy Technology Data Exchange (ETDEWEB)

    Kausch, Albert [Univ. of Rhode Island, Kingston, RI (United States); Rhodes, Richard [Univ. of Rhode Island, Kingston, RI (United States)

    2017-05-02

    This research adds to the understanding of switchgrass genetics and the increasing of biomass relevant to production of bioenergy. Switchgrass, Panicum virgatum L., and its related species are well known as potential bioenergy crops since the early 1990s. There are global economic, political, US national security and environmental pressures to increase renewable biofuel production and utilization to offset gasoline and diesel fuel use and climate change, especially in the liquid fuel transportation sector. To realize the potential of bioenergy crops, rapid genetic improvement of the most promising perennial grass feedstocks, such as switchgrass, are anticipated by current genomics, association genetics, marker assisted breeding, hybrid plant development, advanced tissue culture, conventional genetics and other approaches to increase yield, processability, and regional adaptation. The technical effectiveness and economic feasibility of the methods or techniques investigated are demonstrated by several publications, presentations and patents produced as an outcome and deliverable of this research. This project is of a broad benefit to the public not only through the dissemination of this information but also to the development of new methods which will be applied to future bioenergy crop improvement as well as other crops.

  11. Novel enabling technologies of gene isolation and plant transformation for improved crop protection

    Energy Technology Data Exchange (ETDEWEB)

    Torok, Tamas

    2013-02-04

    Meeting the needs of agricultural producers requires the continued development of improved transgenic crop protection products. The completed project focused on developing novel enabling technologies of gene discovery and plant transformation to facilitate the generation of such products.

  12. 78 FR 36547 - Technological Advisory Council Recommendation for Improving Receiver Performance

    Science.gov (United States)

    2013-06-18

    ... COMMISSION Technological Advisory Council Recommendation for Improving Receiver Performance AGENCY: Federal... recommendations on avoiding obstacles posed by receiver performance to making spectrum available for new services... paper and its recommendations to help determine what next steps may be appropriate. The...

  13. Technology as an Instrument to Improve Quality, Accountability, and Reflection in Academic Medicine

    Science.gov (United States)

    Wilkes, Michael S.; Howell, Lydia

    2006-01-01

    Objective: This article describes two complementary technology systems used in academic medicine to 1) improve the quality of learning and teaching, and 2) describe the barriers and obstacles encountered in implementing these systems. Method: The literature was integrated with in-depth, case-based experience with technology related to student…

  14. Modern trends in improvement of steel heating technology in continuous furnaces

    Science.gov (United States)

    Timoshpolskiy, V. I.; Temlyantsev, M. V.; Trusova, I. A.

    2016-09-01

    The principles and approaches in the development and improvement of steel heating technology in the furnaces of rolling manufacture of various structural design, based on the systematic study of thermal physical and technological processes, including mathematical modeling, industrial experiments, development of rational temperature-thermal modes.

  15. Technology for improving the performance of semiconductor process; Handotai process no koeinoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-29

    Introduced herein is a report on technology for improving the performance of semiconductor processes, the report resulting from the researches conducted by the submicron rule manufacturing technology research sub-committee. Chapter 1 treats the improvement of lithography, discussing the characteristics of, materials for, and problems in the chemical amplification type resist. Chapter 2 discusses the improvement of the thin film forming technology, summarizing the elements of surface reaction, and technologies relating to the formation of multi-layer wirings and contacts, in Si-based CVD technology. Chapter 3 describes the devices used in and findings obtained from the experiments conducted aiming at realizing a higher precision etching technology. Chapter 4 reports ULSI material technology, centering about the mechanism of bonding, characteristics of junction boundaries, bondage between different substrates, formation of super-fine silicone layer, improvement of characteristics and simplification of processes, and the comparison between bonded SOI (silicon on insulator) and SIMOX (separation by implanted oxygen). Chapter 5 introduces experimenting devices and the results of experiments regarding the growth of natural oxidation film and the examination of surface reactions, for which the technology of in-situ FTIR-ATR (Fourier transformation infrared-attenuated total reflection) is utilized. Chapter 6 discusses the need for and the merit and demerit of the surface control cluster tool for use in the manufacture of the semiconductor device. 219 refs., 117 figs., 10 tabs.

  16. Technology as an Instrument to Improve Quality, Accountability, and Reflection in Academic Medicine

    Science.gov (United States)

    Wilkes, Michael S.; Howell, Lydia

    2006-01-01

    Objective: This article describes two complementary technology systems used in academic medicine to 1) improve the quality of learning and teaching, and 2) describe the barriers and obstacles encountered in implementing these systems. Method: The literature was integrated with in-depth, case-based experience with technology related to student…

  17. The Impact of Information and Communication Technology (ICT) on Educational Improvement

    Science.gov (United States)

    Ghaznavi, Mohammad Reza; Keikha, Alemeh; Yaghoubi, Nour-Mohammad

    2011-01-01

    Information and communication technology has become an inseparable part of human life and caused doing things more through the consumption of less time and cost. The present research aims to study the effect of information and communication technology on the educational improvement of third grade high school students in Khash-Iran. The research…

  18. The contribution of new technology to improved environmental performance in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, A.S.; Hume, H.R. [Chamber of Mines of South Africa, Marshalltown (South Africa)

    1997-10-01

    The contribution of new technology (and of technology under development) to improved environmental performance in mining, mineral processing and disposal of mining wastes is described. While the emphasis of the article is on development in South Africa, the examples are of more general interest and application. 1 ref., 1 fig.

  19. Using Monte Carlo Simulation Technology to Improve Intuitive Effect of Teaching Probability and Mathematical Statistics Course

    Institute of Scientific and Technical Information of China (English)

    万文应; 夏庆

    2015-01-01

    With the illustration of a specific problem, this paper demonstrates that using Monte Carlo Simulation technology will improve intuitive effect of teaching Probability and Mathematical Statistics course, and save instructors’ effort as well.And it is estimated that Monte Carlo Simulation technology will be one of the major teaching methods for Probability and Mathematical Statistics course in the future.

  20. The Promise of Education Information Systems: How Technology Can Improve School Management and Success

    Science.gov (United States)

    Levenson, Nathan; Boser, Ulrich

    2014-01-01

    Many school district strategic plans and education conferences are aggressively embracing technology to improve teaching and learning. Classroom technology typically includes blended learning, personalized learning, online courses for students, and professional development for teachers, among many other things. As districts wrestle with tighter…

  1. Improvement of healthcare quality in pediatric neurology by crowd technologies

    Directory of Open Access Journals (Sweden)

    O. V. Guzeva

    2016-01-01

    , the solution of which requires that the government should invest a great deal of assets and may be rational only when crowd technologies are applied.

  2. Methods and technologies to improve efficiency of water use

    Science.gov (United States)

    Evans, Robert G.; Sadler, E. John

    2008-07-01

    The competition for existing freshwater supplies will require a paradigmatic shift from maximizing productivity per unit of land area to maximizing productivity per unit of water consumed. This shift will, in turn, demand broad systems approaches that physically and biologically optimize irrigation relative to water delivery and application schemes, rainfall, critical growth stages, soil fertility, location, and weather. Water can be conserved at a watershed or regional level for other uses only if evaporation, transpiration, or both are reduced and unrecoverable losses to unusable sinks are minimized (e.g., salty groundwater or oceans). Agricultural advances will include implementation of crop location strategies, conversion to crops with higher economic value or productivity per unit of water consumed, and adoption of alternate drought-tolerant crops. Emerging computerized GPS-based precision irrigation technologies for self-propelled sprinklers and microirrigation systems will enable growers to apply water and agrochemicals more precisely and site specifically to match soil and plant status and needs as provided by wireless sensor networks. Agriculturalists will need to exercise flexibility in managing the rate, frequency, and duration of water supplies to successfully allocate limited water and other inputs to crops. The most effective means to conserve water appears to be through carefully managed deficit irrigation strategies that are supported by advanced irrigation system and flexible, state-of-the-art water delivery systems. Nonagricultural water users will need to exercise patience as tools reflecting the paradigmatic shift are actualized. Both groups will need to cooperate and compromise as they practice more conservative approaches to freshwater consumption.

  3. Timing Successive Product Introductions with Demand Diffusion and Stochastic Technology Improvement

    OpenAIRE

    R. Mark Krankel; Izak Duenyas; Roman Kapuscinski

    2006-01-01

    This paper considers a firm's decisions on the introduction timing for successive product generations. We examine the case where a firm introduces multiple generations of a durable product for which demand is characterized by a demand diffusion process. Under fixed introduction costs, we consider the case where available product technology improves stochastically. As such, delaying introduction to a later date may lead to the capture of further technology improvements, potentially at the cost...

  4. Connectivity of diagnostic technologies: improving surveillance and accelerating tuberculosis elimination.

    Science.gov (United States)

    Andre, E; Isaacs, C; Affolabi, D; Alagna, R; Brockmann, D; de Jong, B C; Cambau, E; Churchyard, G; Cohen, T; Delmee, M; Delvenne, J-C; Farhat, M; Habib, A; Holme, P; Keshavjee, S; Khan, A; Lightfoot, P; Moore, D; Moreno, Y; Mundade, Y; Pai, M; Patel, S; Nyaruhirira, A U; Rocha, L E C; Takle, J; Trébucq, A; Creswell, J; Boehme, C

    2016-08-01

    In regard to tuberculosis (TB) and other major global epidemics, the use of new diagnostic tests is increasing dramatically, including in resource-limited countries. Although there has never been as much digital information generated, this data source has not been exploited to its full potential. In this opinion paper, we discuss lessons learned from the global scale-up of these laboratory devices and the pathway to tapping the potential of laboratory-generated information in the field of TB by using connectivity. Responding to the demand for connectivity, innovative third-party players have proposed solutions that have been widely adopted by field users of the Xpert(®) MTB/RIF assay. The experience associated with the utilisation of these systems, which facilitate the monitoring of wide laboratory networks, stressed the need for a more global and comprehensive approach to diagnostic connectivity. In addition to facilitating the reporting of test results, the mobility of digital information allows the sharing of information generated in programme settings. When they become easily accessible, these data can be used to improve patient care, disease surveillance and drug discovery. They should therefore be considered as a public health good. We list several examples of concrete initiatives that should allow data sources to be combined to improve the understanding of the epidemic, support the operational response and, finally, accelerate TB elimination. With the many opportunities that the pooling of data associated with the TB epidemic can provide, pooling of this information at an international level has become an absolute priority.

  5. [Biological diagnosis of pheochromocytoma: impact of technological improvement].

    Science.gov (United States)

    Peyrin, L; Mornex, R

    1993-01-01

    Laboratory diagnosis of pheochromocytoma must give evidence of increased catecholamine production. This requires measurement of catecholamines and their metabolites (normetanephrine NMN, metanephrine MN and/or VMA) in urine or in plasma. The various assays can be also performed during dynamic test that stimulate or inhibit catecholamine release. The recent introduction in biochemistry of high performance liquid chromatography coupled to electrochemical detection (HPLC-ED) has greatly reduced drug-induced interference and has therefore narrowed the reference value range. The two groups of compounds that have most benefited from such analytical improvements are urinary metanephrines and VMA. The technical progress has greatly simplified the laboratory diagnosis of pheochromocytoma both by improving the reliability of already available compounds and by favouring the development of news markers. However, the diagnostic sensitivity of the various urinary and plasmatic markers remains very unequal and the diagnosis of pheochromocytoma requires a carefully planned sequence of studies including appropriate biochemical tests able to affirm or to exclude the diagnosis with a high degree of security while reducing the duration and cost of the investigation. Among urinary markers, metanephrines remain the most direct indices of catecholamine hypersecretion and provide the most reliable biochemical indicators of the existence of pheochromocytoma. The diagnostic sensitivity of urinary metanephrines (about 98%) greatly exceeds that of catecholamines and VMA (60-70%). These differences are related to the diversity and specificity of physiological mechanisms involved in the synthesis, the release and inactivation of markers (catecholamines, metanephrines, VMA) and to the variety of clinical presentations and secretory patterns of pheochromocytomas. Considering the practical necessity of simplifying the collection of laboratory samples, use of plasma assays for the diagnosis of

  6. How to improve the success rate of mouse cloning technology.

    Science.gov (United States)

    Thuan, Nguyen Van; Kishigami, Satoshi; Wakayama, Teruhiko

    2010-02-01

    It has now been 13 years since the first cloned mammal Dolly the sheep was generated from somatic cells using nuclear transfer (SCNT). Since then, this technique has been considered an important tool not only for animal reproduction but also for regenerative medicine. However, the success rate is still very low and the mechanisms involved in genomic reprogramming are not yet clear. Moreover, the NT technique requires donated fresh oocyte, which raises ethical problems for production of human cloned embryo. For this reason, the use of induced pluripotent stem cells for genomic reprogramming and for regenerative medicine is currently a hot topic in this field. However, we believe that the NT approach remains the only valid way for the study of reproduction and basic biology. For example, only the NT approach can reveal dynamic and global modifications in the epigenome without using genetic modification, and it can generate offspring from a single cell or even a frozen dead body. Thanks to much hard work by many groups, cloning success rates are increasing slightly year by year, and NT cloning is now becoming a more applicable method. This review describes how to improve the efficiency of cloning, the establishment of clone-derived embryonic stem cells and further applications.

  7. Improving collaboration between primary care research networks using Access Grid technology

    Directory of Open Access Journals (Sweden)

    Zsolt Nagykaldi

    2008-05-01

    Full Text Available Access Grid (AG is an Internet2-driven, high performance audio_visual conferencing technology used worldwide by academic and government organisations to enhance communication, human interaction and group collaboration. AG technology is particularly promising for improving academic multi-centre research collaborations. This manuscript describes how the AG technology was utilised by the electronic Primary Care Research Network (ePCRN that is part of the National Institutes of Health (NIH Roadmap initiative to improve primary care research and collaboration among practice- based research networks (PBRNs in the USA. It discusses the design, installation and use of AG implementations, potential future applications, barriers to adoption, and suggested solutions.

  8. Research on technology environment improvement of related industries based on internet governance

    Science.gov (United States)

    Zhang, Jing; Guan, Zhongliang

    2017-08-01

    The technology of Internet is an important factor of industry’s development. Constructing a good technical environment is the foundation of the Internet and related industries’ development. This paper demonstrates the necessity of the construction and improvement of the Internet and the related industries technology environment through comparing the current situation of the related industries. It also points out that China needs to improve the environment of the Internet technology urgently. The paper establishes the technology demand pattern of different related industries, and explores strategies of the different Internet technology environment’s construction and perfection according to the different demand of the strong related Internet and the weak related Internet to the industries environment. This paper analyzes the factors that threaten the security of the Internet, and fully demonstrates the methods and tactics of establishing and improving the technology environment Internet hardware, the Internet and related industries in China under the basis of the framework of comprehensive management of Internet. This paper also studies the construction and improvement of the comprehensive management technology environment based on the Internet industry in China.

  9. Accumulation of technological capabilities and operational performance improvement: evidence from a firm-level case study

    Directory of Open Access Journals (Sweden)

    Marcelio Fonseca

    2014-11-01

    Full Text Available Drawing on a single case study based on first-hand and long-term evidence gathered through extensive fieldwork, this article examines the process of technological capability accumulation and its implications for operational performance improvement in a chemical firm in Brazil (1980-2007. The evidence indicates that the efforts on technological capability accumulation, especially for innovative activities, permitted the case-study firm to improve its operational performance, notably in terms of technical and, to some extent, in terms of commercial indicators. This study contributes to advancing our understanding of relationship between the firm-level accumulation of technological capabilities and operational performance improvement. The study draws managers’ attention to the importance of managing and measuring a multiplicity of technological capabilities within firms and to the relevance of firm-level engineering-based innovative activities, normally neglected by policy makers.

  10. Driving technology for improving motion quality of active-matrix organic light-emitting diode display

    Science.gov (United States)

    Kim, Jongbin; Kim, Minkoo; Kim, Jong-Man; Kim, Seung-Ryeol; Lee, Seung-Woo

    2014-09-01

    This paper reports transient response characteristics of active-matrix organic light emitting diode (AMOLED) displays for mobile applications. This work reports that the rising responses look like saw-tooth waveform and are not always faster than those of liquid crystal displays. Thus, a driving technology is proposed to improve the rising transient responses of AMOLED based on the overdrive (OD) technology. We modified the OD technology by combining it with a dithering method because the conventional OD method cannot successfully enhance all the rising responses. Our method can improve all the transitions of AMOLED without modifying the conventional gamma architecture of drivers. A new artifact is found when OD is applied to certain transitions. We propose an optimum OD selection method to mitigate the artifact. The implementation results show the proposed technology can successfully improve motion quality of scrolling texts as well as moving pictures in AMOLED displays.

  11. Can Technology Improve Large Class Learning? The Case of an Upper-Division Business Core Class

    Science.gov (United States)

    Stanley, Denise

    2013-01-01

    Larger classes are often associated with lower student achievement. The author tested the hypothesis that the introduction of personal response systems significantly improves scores in a 250-seat classroom, through the channels of improved attendance and engagement. She focused on how continuous participation with the technology could change…

  12. Technology, managerial, and policy initiatives for improving environmental performance in small-scale gold mining industry.

    Science.gov (United States)

    Hilson, Gavin; Van der Vorst, Rita

    2002-12-01

    This paper reviews a series of strategies for improving environmental performance in the small-scale gold mining industry. Although conditions vary regionally, few regulations and policies exist specifically for small-scale gold mining activity. Furthermore, because environmental awareness is low in most developing countries, sites typically feature rudimentary technologies and poor management practices. A combination of policy-, managerial- and technology-related initiatives is needed to facilitate environmental improvement in the industry. Following a broad overview of these initiatives, a recommended strategy is put forth for governments keen on improving the environmental conditions of resident small-scale gold mines.

  13. Work organisation, technology and working conditions

    NARCIS (Netherlands)

    Dhondt, S.; Kraan, K.; Sloten, G. van

    2002-01-01

    The personal computer, computer networks and the Internet have brought the Union into the Information Age. These technological changes have inevitably led to changes in the work environment and the quality of working conditions. For the third time, the European Foundation for the Improvement of Livi

  14. Integration of molecular genetic technology with quantitative genetic technology for maximizing the speed of genetic improvement

    Institute of Scientific and Technical Information of China (English)

    Jack; C.M.; DEKKERS

    2005-01-01

    To date,most genetic progress for quantita-tive traits in livestock has been made by selec-tion on phenotype or on estimates of breedingvalues(BBV)derived from phenotype,withoutknowledge of the number of genes that affect thetrait or the effects of each gene.In this quantita-tive genetic approach to genetic improvement,the genetic architecture of traits of interest hasessentially been treated as a‘black box’.De-spite this,the substantial rates of genetic im-provement that have been and continue to be a-chie...

  15. Automated Solid-Phase Subcloning Based on Beads Brought into Proximity by Magnetic Force

    DEFF Research Database (Denmark)

    Hudson, Elton P.; Nikoshkov, Andrej; Uhlén, Mathias;

    2012-01-01

    and the gene are immobilized to separate paramagnetic beads and brought into proximity by magnetic force. Ligation events were directly evaluated using fluorescent-based microscopy and flow cytometry. The highest ligation efficiencies were obtained when gene- and vector-coated beads were brought into close...... contact by application of a magnet during the ligation step. An automated procedure was developed using a laboratory workstation to transfer genes into various expression vectors and more than 95% correct clones were obtained in a number of various applications. The method presented here is suitable...

  16. Improving mine safety technology and training in the U.S. recommendations of the Mine Safety Technology and Training Commission

    Institute of Scientific and Technical Information of China (English)

    GRAYSON R. Larry

    2008-01-01

    The key issues studied focused on underground coal mining and included (1)prevention of explosions in sealed areas, (2) better emergency preparedness and re-sponse, (3) improvement of miners' ability to escape, (4) better protection of miners beforeand after a fire or explosion, (5) improved provision of oxygen, and (6) development andimplementation of more robust post-incident communication. The U.S. Congress passedthe Mine Improvement and New Emergency Response Act of 2006, which mandated newlaws to address the issues. Concurrent with investigations and congressional deliberations,the National Mining Association formed the independent Mine Safety Technology andTraining Commission to study the state-of-the-art relative to technology and training thatcould address the vulnerabilities exposed by the mine disasters. As discussed, the reportoutlined persistent vulnerabilities linked with significant hazards in underground coal mines,and made recommendations to provide a path for addressing them. Overall the commis-sion report made 75 recommendations in the areas of risk-based design and management,communications technology, emergency response and mine rescue procedures, trainingfor preparedness, and escape and protection strategies. In its deliberations, the commis-sion importantly noted that mine safety in the U.S. needs to follow a new paradigm for en-suring mine safety and developing a culture of prevention that supports safe production atthe business core. In the commission's viewpoint, the bottom line in protecting coal minersis not only adopting a culture of prevention but also systematically pursuing mitigation ofsignificant risks.

  17. THE ECONOMIC IMPACT OF IMPROVED AGRICULTURAL TECHNOLOGY ON CASSAVA PRODUCTIVITY IN KOGI STATE OF NIGERIA

    Directory of Open Access Journals (Sweden)

    Ilemona Adofu

    2013-07-01

    Full Text Available This paper assessed the economic impact of improved agricultural technologies on cassava productivity in Kogi State, Nigeria. The results are drawn from a household survey covering the agricultural season of 2009/2010. The data obtained from interview schedule was subjected to descriptive and inferential statistical analysis. Descriptive statistics for this study include frequency, percentages and means. The hypothesis was tested using chisquare. The result shows that 79.33% of the respondents adopt the use of improved variety within the period under study. The analysis done on the revenue of the respondents before and after the adoption of the improved agricultural technology shows that revenue of farmers after the adoption of innovations are better off than revenue generated before adoption by N27,750 on the average per farmer. This result shows that the impact of improved agricultural technologies on cassava productivity is positive. Additionally, the results attest to the importance of increasing agricultural productivity in tandem with improvements on the adoption and use of improved agricultural technologies and its availability to the reach of farmers with the farmers’ ability to store food. This findings is consistence with Idachaba and Ayoola, (1995 who observed that improved agricultural helped in increasing agricultural productivity.

  18. Point-of-care technology: integration for improved delivery of care.

    Science.gov (United States)

    Gregory, Debbie; Buckner, Martha

    2014-01-01

    The growing complexity of technology, equipment, and devices involved in patient care delivery can be staggering and overwhelming. Technology is intended to be a tool to help clinicians, but it can also be a frustrating hindrance if not thoughtfully planned and strategically aligned. Critical care nurses are key partners in the collaborations needed to improve safety and quality through health information technology (IT). Nurses must advocate for systems that are interoperable and adapted to the context of care experiences. The involvement and collaboration between clinicians, information technology specialists, biomedical engineers, and vendors has never been more relevant and applicable. Working together strategically with a shared vision can effectively provide a seamless clinical workflow, maximize technology investments, and ultimately improve patient care delivery and outcomes. Developing a strategic integrated clinical and IT roadmap is a critical component of today's health care environment. How can technology strategy be aligned from the executive suite to the bedside caregiver? What is the model for using clinical workflows to drive technology adoption? How can the voice of the critical care nurse strengthen this process? How can success be assured from the initial assessment and selection of technology to a sustainable support model? What is the vendor's role as a strategic partner and "co-caregiver"?

  19. A patient centred framework for improving LTC quality of life through Web 2.0 technology.

    Science.gov (United States)

    Pulman, Andy

    2010-03-01

    The NHS and Social Care Model - a blueprint supporting organisations in improving services for people with long-term conditions (LTCs) - noted options to support people with LTCs might include technological tools supporting personalised care and choice and providing resources for patients to self-care and self-manage. Definitions concerning the integration of health information and support with Web 2.0 technology are primarily concerned with approaches from the healthcare perspective. There is a need to design a patient centred framework, encapsulating the use of Web 2.0 technology for people with LTCs who want to support, mitigate or improve quality of life. Existing theoretical frameworks offer a means of informing the design and measurement of this framework. This article describes how Web 2.0 technology could impact on the quality of life of individuals with LTCs and suggests a starting point for developing a theoretically informed patient centred framework.

  20. APPLICATION OF INFORMATION TECHNOLOGIES AND INTERACTIVE TOOLS FOR IMPROVING EDUCATIONAL QUALITY

    Directory of Open Access Journals (Sweden)

    Krasimira Georgieva

    2015-09-01

    Full Text Available The rapid development of science, technology, and information technologies in various sectors of the economy imposes increased requirements and expectations in the preparation of engineering professionals in higher education. In recent years, there have been some difficulties in engineering and technology training related to the assimilation of the methodology for constructive thinking, the development of clear and precise knowledge structuring, improvement of the ability of expressing thoughts, and graphical presentation of information.This article presents some applications and best practices in the use of e-learning systems, interactive boards, and accessories. The application of active teaching methods and use of information technologies with interactive tools, providing active involvement of the students in training, leads to considerable interest and improvement in the quality of teaching and learning.

  1. A reflection on agile requirements engineering: solutions brought and challenges posed

    NARCIS (Netherlands)

    Inayat, Irum; Moraes, Lauriane; Daneva, Maia; Salim, Siti Salwah; Paasivaara, Maria

    2015-01-01

    The software development industry has rapidly accepted agile methods. Empirical studies suggest that due to their flexible and emergent nature, agile methods brought solutions to several chronic problems of traditional software development methods. One among the many is the acceptance of requirement

  2. 13 CFR 142.19 - How are issues brought to the attention of the ALJ?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false How are issues brought to the attention of the ALJ? 142.19 Section 142.19 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION... attention of the ALJ? All applications to the ALJ for an order or ruling are made by motion, stating...

  3. Astronaut Harrison Schmitt looks at 'orange' soil brought back by Apollo 17

    Science.gov (United States)

    1972-01-01

    Scientist-Astronaut Harrison H. 'Jack' Schmitt (facing camera), Apollo 17 lunar module pilot, was one of the first to look at the sample of 'orange' soil brought back from the Taurus-Littrow landing site by the Apollo 17 crewmen.

  4. When should virtual cybercrime be brought under the scope of the criminal law?

    NARCIS (Netherlands)

    Strikwerda, Litska

    2012-01-01

    This paper is about the question when virtual cybercrime should be brought under the scope of the criminal law. By virtual cybercrime I mean crime that involves a specific aspect of computers or computer networks: virtuality. Examples of virtual cybercrime are: virtual child pornography, theft of vi

  5. 14 CFR 1217.106 - Articles brought into the United States by NASA from space.

    Science.gov (United States)

    2010-01-01

    ... NASA from space. 1217.106 Section 1217.106 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION DUTY-FREE ENTRY OF SPACE ARTICLES § 1217.106 Articles brought into the United States by NASA from... territory of the United States by NASA from space shall not be considered an importation, and...

  6. When should virtual cybercrime be brought under the scope of the criminal law?

    NARCIS (Netherlands)

    Strikwerda, Litska

    2012-01-01

    This paper is about the question when virtual cybercrime should be brought under the scope of the criminal law. By virtual cybercrime I mean crime that involves a specific aspect of computers or computer networks: virtuality. Examples of virtual cybercrime are: virtual child pornography, theft of

  7. 17 CFR 1.70 - Notification of State enforcement actions brought under the Commodity Exchange Act.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Notification of State enforcement actions brought under the Commodity Exchange Act. 1.70 Section 1.70 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION GENERAL REGULATIONS UNDER THE COMMODITY EXCHANGE ACT...

  8. Software Reuse Methods to Improve Technological Infrastructure for e-Science

    Science.gov (United States)

    Marshall, James J.; Downs, Robert R.; Mattmann, Chris A.

    2011-01-01

    Social computing has the potential to contribute to scientific research. Ongoing developments in information and communications technology improve capabilities for enabling scientific research, including research fostered by social computing capabilities. The recent emergence of e-Science practices has demonstrated the benefits from improvements in the technological infrastructure, or cyber-infrastructure, that has been developed to support science. Cloud computing is one example of this e-Science trend. Our own work in the area of software reuse offers methods that can be used to improve new technological development, including cloud computing capabilities, to support scientific research practices. In this paper, we focus on software reuse and its potential to contribute to the development and evaluation of information systems and related services designed to support new capabilities for conducting scientific research.

  9. The impact of technological improvements on developing financial markets: The case of the Johannesburg Stock Exchange

    Directory of Open Access Journals (Sweden)

    Mehmet F. Dicle

    2013-07-01

    Full Text Available Can a significant technological improvement make an economically justifiable contribution to a financial market's development? The Johannesburg Stock Exchange (JSE incorporated the SETS system from the London Stock Exchange in 2002. It is certain that SETS is a technologically efficient trading system, and it would undoubtedly improve trading in the JSE. We test whether SETS represents a structural break by examining whether there was an increase in the JSE's liquidity, market efficiency and international integration after the introduction of SETS. While SETS is certainly a technological improvement with increased liquidity, it is not a sufficient factor to render it efficient. After the incorporation of SETS, the JSE has become more independent and it now offers better diversification opportunities for international investors.

  10. Evaluation Of Electrochemical Machining Technology For Surface Improvements In Additive Manufactured Components

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R [ORNL; List III, Frederick Alyious [ORNL; Carver, Keith [ORNL

    2015-09-23

    ORNL Manufacturing Demonstration Facility worked with ECM Technologies LLC to investigate the use of precision electro-chemical machining technology to polish the surface of parts created by Arcam electron beam melting. The goals for phase one of this project have been met. The project goal was to determine whether electro-chemical machining is a viable method to improve the surface finish of Inconel 718 parts fabricated using the Arcam EBM method. The project partner (ECM) demonstrated viability for parts of both simple and complex geometry. During the course of the project, detailed process knowledge was generated. This project has resulted in the expansion of United States operations for ECM Technologies.

  11. Improving the efficiency of R&D and the market diffusion of energy technologies

    CERN Document Server

    Bradke, Harald; Som, Oliver; Mannsbar, Wilhelm; Cremer, Clemens; Dreher, Carsten; Edler, Jakob; Ebersberger, Bernd; Radgen, Peter; Ruhland, Sascha; Krebs, Alexandra

    2009-01-01

    Is there a chance that public or private research and development institutions can improve the efficiency of the R&D process? This book gives a positive answer by designing an integrated concept of the science technology cycle and the innovation system of each technology. The position of a new technology in the sciencetechnology cycle is identified by several indicators from patent analysis, citations and market information data. The innovation system supports the search for a comprehensive understanding of all important stakeholders of an innovation, possible obstacles and related policies. T

  12. Case studies on forecasting for innovative technologies: frequent revisions improve accuracy.

    Science.gov (United States)

    Lerner, Jeffrey C; Robertson, Diane C; Goldstein, Sara M

    2015-02-01

    Health technology forecasting is designed to provide reliable predictions about costs, utilization, diffusion, and other market realities before the technologies enter routine clinical use. In this article we address three questions central to forecasting's usefulness: Are early forecasts sufficiently accurate to help providers acquire the most promising technology and payers to set effective coverage policies? What variables contribute to inaccurate forecasts? How can forecasters manage the variables to improve accuracy? We analyzed forecasts published between 2007 and 2010 by the ECRI Institute on four technologies: single-room proton beam radiation therapy for various cancers; digital breast tomosynthesis imaging technology for breast cancer screening; transcatheter aortic valve replacement for serious heart valve disease; and minimally invasive robot-assisted surgery for various cancers. We then examined revised ECRI forecasts published in 2013 (digital breast tomosynthesis) and 2014 (the other three topics) to identify inaccuracies in the earlier forecasts and explore why they occurred. We found that five of twenty early predictions were inaccurate when compared with the updated forecasts. The inaccuracies pertained to two technologies that had more time-sensitive variables to consider. The case studies suggest that frequent revision of forecasts could improve accuracy, especially for complex technologies whose eventual use is governed by multiple interactive factors. Project HOPE—The People-to-People Health Foundation, Inc.

  13. A TOOL FOR STRATEGIC TARGET SETTING ON DEVELOPMENT AND IMPROVEMENT OF REMEDIATION TECHNOLOGIES

    Science.gov (United States)

    Inoue, Yasushi; Katayama, Arata

    A tool for strategic development and improvement of remediation technologies was proposed to set a target specification by applying the RNSOIL, an evaluation index of remediation technologies for contaminated soil. Under the scenario of agricultural site contamination with dieldrin and its remediation, improving items and the target values of the bioremediation using charcoal material (charcoal bioremediation), as a developing technology, were determined. The development target was that the RNSOIL value of charcoal bioremediation fell below that of high temperature thermal desorption as a competing technology. Sensitivity assessments of the RNSOIL selected a remediation period and an incubation volume for bacterial growth and settlement in the charcoal as improving properties. Risk assessment and life cycle inventory analysis was introduced to determine a human health risk due to contaminant, and a total cost of remediation or a CO2 emission accompanied with remediation, as evaluating factors of RNSOIL, respectively. Assessment based on the RNSOIL was able to show clearly improving items for achieving the target or items with great effect for improvement.

  14. Operation algorithm of the information system of improving organizational and technological reliability of construction projects using energy efficient technologies

    Directory of Open Access Journals (Sweden)

    Ginzburg Aleksandr Vital’evich

    2016-10-01

    Full Text Available The main source for the development of construction projects with energy-efficient technologies in use is investments. The traditional approaches of risk management: insurance, diversification and redundancy only raise the cost of the construction project, which has a negative impact on the investor’s decision to invest. In order to solve this problem an information system has been developed, which is based on the principle of insightful analysis of the potential “pure” risks and a list of recommendations of risk management. This tool allows identifying all the weaknesses of a construction project, improving the organizational and technological reliability, and imparting an understanding to the investor / a customer of the resources required for the project implementation.

  15. Advanced technologies for improved expression of recombinant proteins in bacteria: perspectives and applications.

    Science.gov (United States)

    Gupta, Sanjeev K; Shukla, Pratyoosh

    2016-12-01

    Prokaryotic expression systems are superior in producing valuable recombinant proteins, enzymes and therapeutic products. Conventional microbial technology is evolving gradually and amalgamated with advanced technologies in order to give rise to improved processes for the production of metabolites, recombinant biopharmaceuticals and industrial enzymes. Recently, several novel approaches have been employed in a bacterial expression platform to improve recombinant protein expression. These approaches involve metabolic engineering, use of strong promoters, novel vector elements such as inducers and enhancers, protein tags, secretion signals, high-throughput devices for cloning and process screening as well as fermentation technologies. Advancement of the novel technologies in E. coli systems led to the production of "difficult to express" complex products including small peptides, antibody fragments, few proteins and full-length aglycosylated monoclonal antibodies in considerable large quantity. Wacker's secretion technologies, Pfenex system, inducers, cell-free systems, strain engineering for post-translational modification, such as disulfide bridging and bacterial N-glycosylation, are still under evaluation for the production of complex proteins and peptides in E. coli in an efficient manner. This appraisal provides an impression of expression technologies developed in recent times for enhanced production of heterologous proteins in E. coli which are of foremost importance for diverse applications in microbiology and biopharmaceutical production.

  16. Evaluating the enhancement and improvement of China's technology and financial services platform innovation strategy.

    Science.gov (United States)

    Wu, Ching-Sung; Hu, Kuang-Hua; Chen, Fu-Hsiang

    2016-01-01

    The development of high-tech industry has been prosperous around the world in past decades, while technology and finance have already become the most significant issues in the information era. While high-tech firms are a major force behind a country's economic development, it requires a lot of money for the development process, as well as the financing difficulties for its potential problems, thus, how to evaluate and establish appropriate technology and financial services platforms innovation strategy has become one of the most critical and difficult issues. Moreover, how the chosen intertwined financial environment can be optimized in order that high-tech firms financing problems can be decided has seldom been addressed. Thus, this research aims to establish a technology and financial services platform innovation strategy improvement model, as based on the hybrid MADM model, which addresses the main causal factors and amended priorities in order to strengthen ongoing planning. A DEMATEL technique, as based on Analytic Network Process, as well as modified VIKOR, will be proposed for selecting and re-configuring the aspired technology and financial services platform. An empirical study, as based on China's technology and financial services platform innovation strategy, will be provided for verifying the effectiveness of this proposed methodology. Based on expert interviews, technology and financial services platforms innovation strategy improvement should be made in the following order: credit guarantee platform (C)_credit rating platform (B)_investment and finance platform (A).

  17. Informal Payments and Bought and Brought Goods in the Western Balkans

    DEFF Research Database (Denmark)

    Buch Mejsner, Sofie; Eklund Karlsson, Leena

    2017-01-01

    various patterns and characteristics of these payments. Although these payments have typically been small – particularly to providers in common areas of specialized medicine – evidence regarding bought and brought goods remains limited, indicating that such practices are likely even more common......, of greater magnitude and more problematic than informal payments. Only scant research has examined the measures that are used to tackle informal payments and corruption. The evidence indicates that legalizing informal payments, introducing performance-based payment systems, strengthening reporting, changing......Informal payments for healthcare are common in the Western Balkans, although these payments negatively affect public health and health care. To identify literature from the Western Balkans on what is known about informal payments and bought and brought goods, to examine their effects on healthcare...

  18. An overview of the geotechnical damage brought by the 2016 Kumamoto Earthquake, Japan

    Science.gov (United States)

    Hemanta Hazarika,; Takaji Kokusho,; Kayen, Robert; Dashti, Shideh; Yutaka Tanoue,; Shuuichi Kuroda and Kentaro Kuribayashi,; Daisuke Matsumoto,; Furuichi, Hideo

    2016-01-01

    The 2016 Kumamoto earthquake with a moment magnitude of 7.0 (Japanese intensity = 7) that struck on April 16 brought devastation in many areas of Kumamoto Prefecture and partly in Oita Prefecture in Kyushu Region, Japan. The earthquake succeeds a foreshock of magnitude 6.5 (Japanese intensity = 7) on April 14. The authors conducted two surveys on the devastated areas: one during April 16-17, and the other during May 11-14. This report summarizes the damage brought to geotechnical structures by the two consecutive earthquakes within a span of twenty-eight hours. This report highlights some of the observed damage and identifies reasons for such damage. The geotechnical challenges towards mitigation of losses from such earthquakes are also suggested.

  19. The intensive margin of technology adoption--Experimental evidence on improved cooking stoves in rural Senegal.

    Science.gov (United States)

    Bensch, Gunther; Peters, Jörg

    2015-07-01

    Today, almost 3 billion people in developing countries rely on biomass as primary cooking fuel, with profound negative implications for their well-being. Improved biomass cooking stoves are alleged to counteract these adverse effects. This paper evaluates take-up and impacts of low-cost improved stoves through a randomized controlled trial. The randomized stove is primarily designed to curb firewood consumption, but not smoke emissions. Nonetheless, we find considerable effects not only on firewood consumption, but also on smoke exposure and, consequently, smoke-related disease symptoms. The reduced smoke exposure results from behavioural changes in terms of increased outside cooking and a reduction in cooking time. We conclude that in order to assess the effectiveness of a technology-oriented intervention, it is critical to not only account for the incidence of technology adoption - the extensive margin - but also for the way the new technology is used - the intensive margin.

  20. New technology markedly improves hand-hygiene performance among healthcare workers after restroom visits

    DEFF Research Database (Denmark)

    Møller-Sørensen, H; Korshin, A; Mogensen, T

    2016-01-01

    The risks to patients from pathogens present on healthcare workers' (HCWs') hands are high; however, compliance with hand hygiene among HCWs is low. We devised a prospective intervention trial of a new hand-hygiene dispensing technology to improve HCWs' compliance with hand hygiene. Baseline hand...

  1. Utilizing Technology Effectively to Improve Millennials' Educational Performance: An Exploratory Look at Business Students' Perceptions

    Science.gov (United States)

    Aviles, Maria; Eastman, Jacqueline K.

    2012-01-01

    Purpose: The purpose of this paper is to discuss how technological tools, such as Web 2.0 and online learning management systems, can be utilized to improve Millennials' educational performance. Design/methodology/approach: An exploratory survey of Millennial business students was conducted to measure their self-reported use and perceived…

  2. Utilizing Technology Effectively to Improve Millennials' Educational Performance: An Exploratory Look at Business Students' Perceptions

    Science.gov (United States)

    Aviles, Maria; Eastman, Jacqueline K.

    2012-01-01

    Purpose: The purpose of this paper is to discuss how technological tools, such as Web 2.0 and online learning management systems, can be utilized to improve Millennials' educational performance. Design/methodology/approach: An exploratory survey of Millennial business students was conducted to measure their self-reported use and perceived…

  3. Pedagogical Technology of Improving the Students' Viability Levels in the Process of Mastering Foreign Language

    Science.gov (United States)

    Dmitrienko, Nadezhda; Ershova, Svetlana; Konovalenko, Tatiana; Kutsova, Elvira; Yurina, Elena

    2015-01-01

    The article points out that the process of mastering foreign language stimulates students' personal, professional and cultural growth, improving linguistic, communicative competences and viability levels. A proposed pedagogical technology of modeling different communicative situations has a serious synergetic potential for students' self organized…

  4. Using Rapid Application Development To Improve the Usability of a Preservice Teacher Technology Course.

    Science.gov (United States)

    Lohr, Linda; Javeri, Manisha; Mahoney, Chris; Gall, Jim; Li, Kathy; Strongin, Dawn

    2003-01-01

    Discussion of instructional design focuses on the use of rapid application development (RAD) procedures for producing timely instruction, particularly self-paced instruction for teaching technology skills. Describes research that examined the use of a RAD approach to improve the usability of instructional materials for a preservice technology…

  5. Using Instructional Technology to Improve Preservice Teachers' Knowledge of Phonological Awareness

    Science.gov (United States)

    Driver, Melissa K.; Pullen, Paige C.; Kennedy, Michael J.; Williams, Mira Cole; Ely, Emily

    2014-01-01

    Teacher understanding of phonological awareness (PA) and how to teach PA is related to student outcomes; however, many teachers have an inadequate understanding of PA. The purpose of this study is to describe an intervention intended to improve preservice teachers' understanding of PA, using an example of instructional technology called…

  6. Contemporary Technologies to Improve the Quality of Education When Training Teachers

    Science.gov (United States)

    Sibgatullina, Alfiya

    2015-01-01

    The article considers contemporary technologies to improve the quality of teachers' education (as exemplified by the training of foreign language teachers). The author presents analysis of the "quality of education" concept, proposes and analyzes the criteria for assessing the quality of education of future foreign language teachers.…

  7. Assessing the Quality of Medical Information Technology Economic Evaluations: Room for Improvement

    Science.gov (United States)

    Eisenstein, Eric L.; Ortiz, Maqui; Anstrom, Kevin J.; Crosslin, David R.; Lobach, David F.

    2006-01-01

    Medical information systems are being recognized for their ability to improve patient outcomes. While standards for the economic evaluation of medical technologies were instituted in the mid-1990s, little is known about their application in medical information technology studies. In a review of medical information technology evaluation studies published between 1982 and 2002, we found that the volume and variety of economic evaluations had increased; however, investigators routinely omitted key cost or effectiveness elements in their designs, resulting in publications with incomplete, and potentially biased, economic findings. Of the studies that made economic claims, 23% did not report any economic data, 40% failed to include any effectiveness measures, and more than 50% used a case study or pre- post- test design. Thus, during a time when health economic study methods in general have experienced significant development, there is little evidence of similar progress in medical information technology economic evaluations. PMID:17238338

  8. A Review on Phytosome Technology as a Novel Approach to Improve The Bioavailability of Nutraceuticals

    Science.gov (United States)

    Amin, Tawheed; Bhat, Suman Vikas

    2012-08-01

    The bioavailability and absorption of water soluble phytoconstituents is erratic due to poor solubility of these constituents in gastrointestinal tract. This can be overcome by a novel delivery system known as phytosome technology in which water soluble phytoconstituents are allowed to react with phospholipids. For better and improved bioavailability, natural phytoconstituents must have a good balance between hydrophilicity (helps in dissolution in gastro-intestinal fluids) and hydrophobicity (helps to cross lipid rich cell membranes). This is achieved through phytosome technology. Phospholipids have a dual solubility and acts as an emulsifier. Phytosome technology acts as a bridge between novel and conventional delivery systems. Many products are available in the market based on this phytosome technology which include popular herbal extracts such as Ginkgo biloba, Silybum marianum, grape seed, olive oil flavonoids etc.

  9. Envisioning Improved Work Practices and Associated Technology Requirements in the Context of the Broader Socio-technical System

    OpenAIRE

    CAHILL, JOAN

    2008-01-01

    Crucially, the introduction of new technologies follows from the envisionment of new or improved work processes and related task workflows. Proposed technology concepts must be derived in conjunction with end users. Further, the advancement of new or improved work technologies must be predicated on operational requirements and fit the organisational environment. Technology innovation should support operational and organisational goals, as opposed to been driven by new or innovative technical ...

  10. Sustainable technological development in chemistry. Improving the quality of life through chemistry and agriculture

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    The importance of agricultural products, their potential conversion to energy sources and their applications for fibre-reinforced construction materials is emphasized. Another potentially important technology is the conversion of sunlight into electricity such as occurs in the leaves of plants. Parallels with nature exist, even though conversions with inorganic materials have, until now, been promising. The ability to control chemical reactions is the subject throughout all the following chapters. The goal is to achieve high reaction efficiencies and to use fewer basic materials, both of which will lead to a reduction in environmental stress. Sustainable developments in chemistry can be described by two approaches: (1) Improvements in society, with challenges for chemistry; and (2) Improvement in the chemical sector itself. Both approaches are dealt with in this report. Five areas for development have been chosen in the discussions for `DTO-Chemie`: Integrated plant conversion (IPC), in particular Valorisation of plant parts for raw materials and energy; Biomass conversion (C1 Chemistry), in particular Technologies for (among others) C1-based chemicals and energy carriers; Photovoltaic cells (PSC), in particular Technologies for the conversion of solar light into electricity; Process Technology in Fine chemistry (PFC), in particular Methodology of manufacturing processes for Fine chemicals; and Sustainable Construction Materials (FRC); in particular Techniques for using fibre-reinforced composites in construction applications. These areas can be viewed as clusters of technologies, with a strong chemistry and agricultural component, which are necessary for achieving a sustainable future. Furthermore, it is important to recognise that technology requires a progressive development (technology lifecycle). The five areas of technology development are tested against a number of criteria: (1) Sustainability / leap / volume; (2) Horizon 2050; (3) Commitment from industry

  11. Trends in plant virus epidemiology: opportunities from new or improved technologies.

    Science.gov (United States)

    Jones, R A C

    2014-06-24

    This review focuses on new or improved technologies currently being applied, or likely to be applied in the future, to worldwide research on plant virus epidemiology. Recent technological advances and innovations provide many opportunities to improve understanding of the way diverse types of plant virus epidemics develop and how to manage them. The review starts at the macro level by considering how recent innovations in remote sensing and precision agriculture can provide valuable information about (i) virus epidemics occurring at continental, regional or district scales (via satellites) and within individual crops (mostly via lightweight unmanned aerial vehicles), and (ii) exactly where to target control measures. It then considers recent improvements in information systems and innovations in modelling that improve (i) understanding of virus epidemics and ability to predict them, and (ii) delivery to end-users of critical advice on control measures, such as Internet-based Decision Support Systems. The review goes on to discuss how advances in analysis of spatiotemporal virus spread patterns within crops can help to enhance understanding of how virus epidemics develop and validate potentially useful virus control measures. At the micro level, the review then considers the many insights that advances in molecular epidemiology can provide about genetic variation within plant virus populations involved in epidemics, and how this variation drives what occurs at the macro level. Next, it describes how recent innovations in virus detection technologies are providing many opportunities to collect and analyse new types, and ever increasing amounts, of data about virus epidemics, and the genetic variability of the virus populations involved. Finally, the implications for plant virus epidemiology of technologies likely to be important in the future are considered. To address looming world food insecurity and threats to plant biodiversity resulting from climate change and

  12. IMPROVING THE TECHNOLOGY OF BELORUSSIAN RAILWAY IN CONDITIONS OF ELECTRONIC DOCUMENTS USAGE

    Directory of Open Access Journals (Sweden)

    M. M. Kolos

    2016-08-01

    Full Text Available Purpose. The scientific paper highlights improving the technology of railway transport in the Republic of Belarus in conditions of electronic legally significant documents. Methodology. The study covered the collection of statistical data on the duration of separate technological operations performance, the evaluation of static data and the descriptive analysis of their characteristics. When assessing the effectiveness of the proposed measures we used methods of expert estimations, methods of evaluating the effectiveness of IT investments. Findings. Technology, hardware, software, organizational and other aspects of electronic legally significant documents used in freight and commercial work are determined. The work defines the most important directions of technology improvements at Belarusian Railway entities and their relations with shippers and consignees through the use of electronic legally significant documents. These directions are as follows: simplification of station commercial costs accounting, automation of technological operations, improving the interaction between the railway tracks and adjunction stations, simplification of transport planning and demand performance record, implementation of common information space for all participants of transportation process. The predictive estimate of efficiency for implementation of electronic legally significant documents in freight and commercial work of the Belarusian railway is calculated. Originality. This article presents a dual model of digital signature as a tool for the automatic fixation of technological operations or for specifying the time for its implementation, which allows converting a number of technological processes to a new level, helping to create a common information space of freight traffic. Practical value. The obtained results are used to form the list of the actions directed on perfection of railway transport technology in conditions of electronic legally significant

  13. SUPPORTIVE SUPERVISION AS A TECHNOLOGY OF IMPROVING THE QUALITY OF HOSPITAL CARE DELIVERY

    Directory of Open Access Journals (Sweden)

    Svetlana A. Mukhortova

    2017-01-01

    Full Text Available Improving the quality of medical care is a priority in countries with developed and developing health care system. There are various approaches to improve the quality and safety of patient’s care, as well as various strategies to encourage hospitals to achieve this goal. The purpose of the presented literature review was to analyze existing experience of the implementation of technology of supportive supervision in health care facilities to improve the quality of hospital care delivery. The data sources for publication were obtained from the following medical databases: PubMed, Cochrane Library, Medscape, e-library, and books on the topic of the review written by experts. The article discusses the results of the research studies demonstrating the successes and failures of supportive supervision technology application. Implementation of supportive supervision in medical facilities based on generalized experience of different countries is a promising direction in improving the quality of medical care delivery. This technology opens up opportunities to improve skills and work quality of the staff at pediatric hospitals in the Russian Federation.

  14. 3-D Micro and Nano Technologies for Improvements in Electrochemical Power Devices

    Directory of Open Access Journals (Sweden)

    Sunshine Holmberg

    2014-04-01

    Full Text Available This review focuses on recent advances in micro- and nano-fabrication techniques and their applications to electrochemical power devices, specifically microfabricated Lithium-ion batteries, enzymatic and microbial fuel cells (biofuel cells, and dye-sensitized solar cells (DSSCs. Although the maturity of these three technologies ranges from market ready (batteries to fundamental research (biofuel cells to applied research (DSSCs, advances in MEMS (Micro-Electro-Mechanical Systems and NEMS (Nano-Electro-Mechanical Systems techniques, particularly modifications in surface area and surface chemistry, and novel genetic and molecular engineering techniques, significantly improve the electrochemical activity of these technologies across the board. For each of these three categories of power-MEMS devices the review covers: (1 The technical challenges facing the performance and fabrication of electrochemical power devices; (2 Current MEMS and NEMS techniques used to improve efficiency; and (3 Future outlook and suggested improvements of MEMS and NEMS for implementation in electrochemical power devices.

  15. Use of new technology to improve utilization and adherence to immunotherapy.

    Science.gov (United States)

    Joshi, Smita; Dimov, Ves

    2014-01-01

    Technology and social media have dramatically altered the landscape in which we practice medicine. Clinicians have increasingly turned to technology and the internet to enhance patient care. Allergists have used these modalities to improve utilization and adherence to immunotherapy. Electronic medical records (EMRs) are being widely adopted by allergy practices and some offer allergy/immunology specific modules that aid in daily workflow. The development of specialized devices that reduce pain associated with immunotherapy administration may improve compliance with immunotherapy. Social media and other forms of electronic communication such as e-mail, Facebook, Twitter, short message service (SMS), and YouTube give clinicians multiple avenues to disseminate information and reach their patients, possibly improving patient adherence to therapy. Finally, tablet computers, online networks, and electronic surveys provide additional ways to connect patients and physicians.

  16. Results and unsolved problems following the amendment to the Italian Law on assisted reproduction brought about by the Constitutional Court.

    Science.gov (United States)

    Molinelli, Andrea; Bonsignore, Alessandro; Darretta, Valeria; Anserini, Paola

    2012-07-01

    Since the approval of Law N° 40/2004, Italian specialists have been applying assisted reproductive techniques in compliance with a number of restrictions. Several attempts were made to find a solution to the practical and ethical issues brought about by this restrictive legislation. Finally, in May 2009, the Italian Constitutional Court banned most of the limitations. In the last year the authors worked together to study the impact of the Italian Constitutional Court modifications on assisted reproduction from both a gynecological and medico-legal point of view. Despite the clinically positive impact of the ruling, a lot of technical and legal unsolved issues still exist. Analyzing these problems, the authors stress the importance of a multidisciplinary approach to achieve adequate legislation in order to improve patients' outcome and avoid "reproductive migration" from Italy to other European Countries. New regulation could also be important for practitioners by keeping the risk of legal troubles to the minimum.

  17. ICT in EFL: The Global Effect of New Technologies in the Language Classroom

    Science.gov (United States)

    Papadima-Sophocleous, Salomi; Giannikas, Christina Nicole; Kakoulli-Constantinou, Elis

    2014-01-01

    Research studies conducted around the globe have shown that Information and Communication Technologies (ICT) can lead to increased student learning and improved teaching methods. ICT's growth has brought about numerous changes to the education world, making the technological revolution that is happening around us impossible to disregard. Although…

  18. Business Value of Information Sharing and the Role of Emerging Technologies

    Science.gov (United States)

    Kumar, Sanjeev

    2009-01-01

    Information Technology has brought significant benefits to organizations by allowing greater information sharing within and across firm boundaries leading to performance improvements. Emerging technologies such as Service Oriented Architecture (SOA) and Web2.0 have transformed the volume and process of information sharing. However, a comprehensive…

  19. Improving vaccine registries through mobile technologies: a vision for mobile enhanced Immunization information systems.

    Science.gov (United States)

    Wilson, Kumanan; Atkinson, Katherine M; Deeks, Shelley L; Crowcroft, Natasha S

    2016-01-01

    Immunization registries or information systems are critical to improving the quality and evaluating the ongoing success of immunization programs. However, the completeness of these systems is challenged by a myriad of factors including the fragmentation of vaccine administration, increasing mobility of individuals, new vaccine development, use of multiple products, and increasingly frequent changes in recommendations. Mobile technologies could offer a solution, which mitigates some of these challenges. Engaging individuals to have more control of their own immunization information using their mobile devices could improve the timeliness and accuracy of data in central immunization information systems. Other opportunities presented by mobile technologies that could be exploited to improve immunization information systems include mobile reporting of adverse events following immunization, the capacity to scan 2D barcodes, and enabling bidirectional communication between individuals and public health officials. Challenges to utilizing mobile solutions include ensuring privacy of data, access, and equity concerns, obtaining consent and ensuring adoption of technology at sufficiently high rates. By empowering individuals with their own health information, mobile technologies can also serve as a mechanism to transfer immunization information as individuals cross local, regional, and national borders. Ultimately, mobile enhanced immunization information systems can help realize the goal of the individual, the healthcare provider, and public health officials always having access to the same immunization information.

  20. Technology-based self-care methods of improving antiretroviral adherence: a systematic review.

    Directory of Open Access Journals (Sweden)

    Parya Saberi

    Full Text Available As HIV infection has shifted to a chronic condition, self-care practices have emerged as an important topic for HIV-positive individuals in maintaining an optimal level of health. Self-care refers to activities that patients undertake to maintain and improve health, such as strategies to achieve and maintain high levels of antiretroviral adherence.Technology-based methods are increasingly used to enhance antiretroviral adherence; therefore, we systematically reviewed the literature to examine technology-based self-care methods that HIV-positive individuals utilize to improve adherence. Seven electronic databases were searched from 1/1/1980 through 12/31/2010. We included quantitative and qualitative studies. Among quantitative studies, the primary outcomes included ARV adherence, viral load, and CD4+ cell count and secondary outcomes consisted of quality of life, adverse effects, and feasibility/acceptability data. For qualitative/descriptive studies, interview themes, reports of use, and perceptions of use were summarized. Thirty-six publications were included (24 quantitative and 12 qualitative/descriptive. Studies with exclusive utilization of medication reminder devices demonstrated less evidence of enhancing adherence in comparison to multi-component methods.This systematic review offers support for self-care technology-based approaches that may result in improved antiretroviral adherence. There was a clear pattern of results that favored individually-tailored, multi-function technologies, which allowed for periodic communication with health care providers rather than sole reliance on electronic reminder devices.

  1. Improved Switching Characteristics of Fast Power MOSFETs Applying Solder Bump Technology

    Directory of Open Access Journals (Sweden)

    Sibylle Dieckerhoff

    2008-01-01

    Full Text Available The impact of a reduced package stray inductance on the switching performance of fast power MOSFETs is discussed applying advanced 3D packaging technologies. Starting from an overview over new packaging approaches, a solder bump technology using a flexible PI substrate is exemplarily chosen for the evaluation. Measurement techniques to determine the stray inductance are discussed and compared with a numerical solution based on the PEEC method. Experimental results show the improvement of the voltage utilization while there is only a slight impact on total switching losses.

  2. Can eye-tracking technology improve situational awareness in paramedic clinical education?

    Science.gov (United States)

    Williams, Brett; Quested, Andrew; Cooper, Simon

    2013-01-01

    Human factors play a significant part in clinical error. Situational awareness (SA) means being aware of one’s surroundings, comprehending the present situation, and being able to predict outcomes. It is a key human skill that, when properly applied, is associated with reducing medical error: eye-tracking technology can be used to provide an objective and qualitative measure of the initial perception component of SA. Feedback from eye-tracking technology can be used to improve the understanding and teaching of SA in clinical contexts, and consequently, has potential for reducing clinician error and the concomitant adverse events. PMID:27147870

  3. Demonstration of improved vehicle fuel efficiency through innovative tire design, materials, and weight reduction technologies

    Energy Technology Data Exchange (ETDEWEB)

    Donley, Tim [Cooper Tire & Rubber Company Incorporated, Findlay, OH (United States)

    2014-12-31

    Cooper completed an investigation into new tire technology using a novel approach to develop and demonstrate a new class of fuel efficient tires using innovative materials technology and tire design concepts. The objective of this work was to develop a new class of fuel efficient tires, focused on the “replacement market” that would improve overall passenger vehicle fuel efficiency by 3% while lowering the overall tire weight by 20%. A further goal of this project was to accomplish the objectives while maintaining the traction and wear performance of the control tire. This program was designed to build on what has already been accomplished in the tire industry for rolling resistance based on the knowledge and general principles developed over the past decades. Cooper’s CS4 (Figure #1) premium broadline tire was chosen as the control tire for this program. For Cooper to achieve the goals of this project, the development of multiple technologies was necessary. Six technologies were chosen that are not currently being used in the tire industry at any significant level, but that showed excellent prospects in preliminary research. This development was divided into two phases. Phase I investigated six different technologies as individual components. Phase II then took a holistic approach by combining all the technologies that showed positive results during phase one development.

  4. How urgent are cases brought to the emergency department by ambulance?

    Directory of Open Access Journals (Sweden)

    Melih Yuksel

    2015-06-01

    Full Text Available Objective: Emergency departments are the first places to which patients present with unexpected or unforeseen health problems. The purpose of this study was to assess the urgency of cases brought by ambulance to the Hospital on the basis of a three-level triage system. Methods: This study was performed between 01.06.2013 and 31.09.2013 at the Diyarbakır Education and Research Hospital. Our emergency service unit is a third degree service for all adult patient groups and all child trauma types. Triage of patients brought to the emergency department by ambulance was performed by emergency medicine specialists. Patients’ vital findings, identity data and triage categories were assessed. Results: 712 patients were included, 382 (53.7% male and 330 (46.3% female, with a mean age of 45. In this study, 619 (86.9% patients were transferred from the scene and 93 (13.1 between hospitals, 483 (67.8% patients were brought by emergency medicine technician (EMT teams, 107 (15% by physician-led teams, 107 (15 by paramedic teams and 15 (2.1% by other teams, 442 (62.1% patients were assessed as yellow, 141 (19.8% as green and 129 (19.1% as red zone. Five hundred eighty (81.5% patients were discharged and 115 (15.9% were hospitalized. Conclusion: Emergency health services are clearly developing rapidly in Turkey. In order for pre-hospital emergency health services not to be abused, we think that these services should be up to the standards of those in developed countries and that public awareness needs to be increased, particularly with regard to triage. J Clin Exp Invest 2015; 6 (2: 126-129

  5. [Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways].

    Science.gov (United States)

    Crager, Sara Eve

    2015-01-01

    The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

  6. Blood transfusions in critical care: improving safety through technology & process analysis.

    Science.gov (United States)

    Aulbach, Rebecca K; Brient, Kathy; Clark, Marie; Custard, Kristi; Davis, Carolyn; Gecomo, Jonathan; Ho, Judy Ong

    2010-06-01

    A multidisciplinary safety initiative transformed blood transfusion practices at St. Luke's Episcopal Hospital in Houston, Texas. An intense analysis of a mistransfusion using the principles of a Just Culture and the process of Cause Mapping identified system and human performance factors that led to the transfusion error. Multiple initiatives were implemented including technology, education and human behaviour change. The wireless technology of Pyxis Transfusion Verification by CareFusion is effective with the rapid infusion module efficient for use in critical care. Improvements in blood transfusion safety were accomplished by thoroughly evaluating the process of transfusions and by implementing wireless electronic transfusion verification technology. During the 27 months following implementation of the CareFusion Transfusion Verification there have been zero cases of transfusing mismatched blood.

  7. A technology to improve formability for aluminum alloy thin-wall corrugated sheet component hydroforming

    Directory of Open Access Journals (Sweden)

    Lang Lihui

    2015-01-01

    Full Text Available The explosively forming projectile (EFP had been traditional adopted for the aluminum thin-walled corrugated sheet, whose deformation range is large but the formability is poor, and this process usually has problems of poor surface quality, long manufacturing cycle and high cost. The active hydroforming process was suggested to solve these issues during EFP. A new technology named as blank bulging by turning the upside down active hydroforming technology was proposed to overcome difficulties in non-uniform thickness distribution and cracking failure of corrugated sheet during the conventional hydroforming process. Both numerical simulations and experiments were conducted for this new technology. The result show that the deformation capacity of aluminum alloys can be improved effectively, and the more uniform distribution of wall thickness was obtained by this new method. It is conducted that the new method is universal for thin-walled, shallow drawing parts with complex section.

  8. Information technology innovation - a genuine driver of improving customer relationship management in romanian companies

    Directory of Open Access Journals (Sweden)

    Ph.D.Associate Professor Camelia Cojocaru

    2012-05-01

    Full Text Available Consolidating the IT field of the company represents a target for most IT responsible, nowadays. At the same time, organizations expect their IT expenditure to increase in the next decade. This paper aims to underline the new generation of information technology and how to use them to make better business decisions in managing enterprise resources and improve customer relationships. The alternative goal is to place the focus not only on developing new software but also on achieving business results, placing particular emphasis on customer relationship management. The purpose of technology is to solve practical business problems, and one of them is the necessity to understand and maintain relationships with the customers. The paper will reveal the companies’ responses to the latest dramatic changes in the informational technologies, in order to cope with the persistence of the global economic crisis and to assure increase of organizational efficiency and profit.

  9. Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways.

    Science.gov (United States)

    Crager, Sara Eve

    2014-11-01

    The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

  10. Fuel Economy Regulations and Efficiency Technology Improvements in U.S. Cars Since 1975

    Science.gov (United States)

    MacKenzie, Donald Warren

    Light-duty vehicles account for 43% of petroleum consumption and 23% of greenhouse gas emissions in the United States. Corporate Average Fuel Economy (CAFE) standards are the primary policy tool addressing petroleum consumption in the U.S., and are set to tighten substantially through 2025. In this dissertation, I address several interconnected questions on the technical, policy, and market aspects of fuel consumption reduction. I begin by quantifying historic improvements in fuel efficiency technologies since the 1970s. First. I develop a linear regression model of acceleration performance conditional on power, weight, powertrain, and body characteristics, showing that vehicles today accelerate 20-30% faster than vehicles with similar specifications in the 1970s. Second, I find that growing use of alternative materials and a switch to more weight-efficient vehicle architectures since 1975 have cut the weight of today's new cars by approximately 790 kg (46%). Integrating these results with model-level specification data, I estimate that the average fuel economy of new cars could have tripled from 1975-2009, if not for changes in performance, size, and features over this period. The pace of improvements was not uniform, averaging 5% annually from 1975-1990, but only 2% annually since then. I conclude that the 2025 standards can be met through improvements in efficiency technology, if we can return to 1980s rates of improvement, and growth in acceleration performance and feature content is curtailed. I next test the hypotheses that higher fuel prices and more stringent CAFE standards cause automotive firms to deploy efficiency technologies more rapidly. I find some evidence that higher fuel prices cause more rapid changes in technology, but little to no evidence that tighter CAFE standards increase rates of technology change. I conclude that standards alone, without continued high gasoline prices, may not drive technology improvements at rates needed to meet the 2025

  11. Managing Returnable Containers Logistics - A Case Study Part II - Improving Visibility through Using Automatic Identification Technologies

    Directory of Open Access Journals (Sweden)

    Gretchen Meiser

    2011-05-01

    Full Text Available This case study is the result of a project conducted on behalf of a company that uses its own returnable containers to transport purchased parts from suppliers. The objective of this project was to develop a proposal to enable the company to more effectively track and manage its returnable containers. The research activities in support of this project included (1 the analysis and documentation of the physical flow and the information flow associated with the containers and (2 the investigation of new technologies to improve the automatic identification and tracking of containers. This paper explains the automatic identification technologies and important criteria for selection. A companion paper details the flow of information and containers within the logistics chain, and it identifies areas for improving the management of the containers.

  12. Evaluating core technology capacity based on an improved catastrophe progression method: the case of automotive industry

    Science.gov (United States)

    Zhao, Shijia; Liu, Zongwei; Wang, Yue; Zhao, Fuquan

    2017-01-01

    Subjectivity usually causes large fluctuations in evaluation results. Many scholars attempt to establish new mathematical methods to make evaluation results consistent with actual objective situations. An improved catastrophe progression method (ICPM) is constructed to overcome the defects of the original method. The improved method combines the merits of the principal component analysis' information coherence and the catastrophe progression method's none index weight and has the advantage of highly objective comprehensive evaluation. Through the systematic analysis of the influencing factors of the automotive industry's core technology capacity, the comprehensive evaluation model is established according to the different roles that different indices play in evaluating the overall goal with a hierarchical structure. Moreover, ICPM is developed for evaluating the automotive industry's core technology capacity for the typical seven countries in the world, which demonstrates the effectiveness of the method.

  13. Information technology tools to improve treatment of patients with depression: focus on guidelines implementation.

    Science.gov (United States)

    Meglic, Matic; Ivanovski, Matic; Marusic, Andrej

    2008-06-01

    Information technology has the potential to improve and support the treatment of depression. Use of clinical guidelines can improve outcome of treatment, but implementation of guidelines is a demanding process and the resulting user compliance is often poor. Electronic health records, clinical decision support systems and other information technology tools seem at first glance to be a preferable way to implement clinical guidelines since they require user's active and problem oriented participation. This article reviews attempts made so far at use of information tools for implementation of clinical guidelines for depression treatment and discusses their effects. It turns out that there are few existing solutions, ambiguous effects and that usage is often limited. In future the factors determining development of successful electronic tools for clinical guidelines implementation will need to be further specified. Further research projects are underway in Slovenia to investigate these issues.

  14. MEMS and FOG Technologies for Tactical and Navigation Grade Inertial Sensors—Recent Improvements and Comparison

    Directory of Open Access Journals (Sweden)

    Olaf Deppe

    2017-03-01

    Full Text Available In the following paper, we present an industry perspective of inertial sensors for navigation purposes driven by applications and customer needs. Microelectromechanical system (MEMS inertial sensors have revolutionized consumer, automotive, and industrial applications and they have started to fulfill the high end tactical grade performance requirements of hybrid navigation systems on a series production scale. The Fiber Optic Gyroscope (FOG technology, on the other hand, is further pushed into the near navigation grade performance region and beyond. Each technology has its special pros and cons making it more or less suitable for specific applications. In our overview paper, we present latest improvements at NG LITEF in tactical and navigation grade MEMS accelerometers, MEMS gyroscopes, and Fiber Optic Gyroscopes, based on our long-term experience in the field. We demonstrate how accelerometer performance has improved by switching from wet etching to deep reactive ion etching (DRIE technology. For MEMS gyroscopes, we show that better than 1°/h series production devices are within reach, and for FOGs we present how limitations in noise performance were overcome by signal processing. The paper also intends a comparison of the different technologies, emphasizing suitability for different navigation applications, thus providing guidance to system engineers.

  15. MEMS and FOG Technologies for Tactical and Navigation Grade Inertial Sensors-Recent Improvements and Comparison.

    Science.gov (United States)

    Deppe, Olaf; Dorner, Georg; König, Stefan; Martin, Tim; Voigt, Sven; Zimmermann, Steffen

    2017-03-11

    In the following paper, we present an industry perspective of inertial sensors for navigation purposes driven by applications and customer needs. Microelectromechanical system (MEMS) inertial sensors have revolutionized consumer, automotive, and industrial applications and they have started to fulfill the high end tactical grade performance requirements of hybrid navigation systems on a series production scale. The Fiber Optic Gyroscope (FOG) technology, on the other hand, is further pushed into the near navigation grade performance region and beyond. Each technology has its special pros and cons making it more or less suitable for specific applications. In our overview paper, we present latest improvements at NG LITEF in tactical and navigation grade MEMS accelerometers, MEMS gyroscopes, and Fiber Optic Gyroscopes, based on our long-term experience in the field. We demonstrate how accelerometer performance has improved by switching from wet etching to deep reactive ion etching (DRIE) technology. For MEMS gyroscopes, we show that better than 1°/h series production devices are within reach, and for FOGs we present how limitations in noise performance were overcome by signal processing. The paper also intends a comparison of the different technologies, emphasizing suitability for different navigation applications, thus providing guidance to system engineers.

  16. MEMS and FOG Technologies for Tactical and Navigation Grade Inertial Sensors—Recent Improvements and Comparison

    Science.gov (United States)

    Deppe, Olaf; Dorner, Georg; König, Stefan; Martin, Tim; Voigt, Sven; Zimmermann, Steffen

    2017-01-01

    In the following paper, we present an industry perspective of inertial sensors for navigation purposes driven by applications and customer needs. Microelectromechanical system (MEMS) inertial sensors have revolutionized consumer, automotive, and industrial applications and they have started to fulfill the high end tactical grade performance requirements of hybrid navigation systems on a series production scale. The Fiber Optic Gyroscope (FOG) technology, on the other hand, is further pushed into the near navigation grade performance region and beyond. Each technology has its special pros and cons making it more or less suitable for specific applications. In our overview paper, we present latest improvements at NG LITEF in tactical and navigation grade MEMS accelerometers, MEMS gyroscopes, and Fiber Optic Gyroscopes, based on our long-term experience in the field. We demonstrate how accelerometer performance has improved by switching from wet etching to deep reactive ion etching (DRIE) technology. For MEMS gyroscopes, we show that better than 1°/h series production devices are within reach, and for FOGs we present how limitations in noise performance were overcome by signal processing. The paper also intends a comparison of the different technologies, emphasizing suitability for different navigation applications, thus providing guidance to system engineers. PMID:28287483

  17. Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards

    Energy Technology Data Exchange (ETDEWEB)

    Still, Dean K [Aprovecho Research Center, Cottage Grove, OR (United States); Hatfield, Micheal S [Aprovecho Research Center, Cottage Grove, OR (United States)

    2015-12-15

    Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards. Protecting public health has become a major motivation for investigating how improved cook stoves might function as a viable intervention. Currently, the great majority of cookstoves for sale in the developing world were not designed for this purpose but instead success was based on criteria such as reduced fuel use, affordability, and ease of use. With DOE funding Aprovecho Research Center spent three years creating stoves using an iterative development and modeling approach resulting in four stoves that in lab tests met the World Health Organization (2014) intermediate rate vented targets for PM2.5 and for CO.

  18. Technology improvement of chromium on steel parts electrodeposition using complex command and control systems

    Science.gov (United States)

    Stănescu, A.; Alecusan, A. M.; Dimitescu, A.

    2016-08-01

    The paper aims to provide improved technological process of electrochemical deposition of chromium on steel for decorative parts for corrosion protection but also to improve mechanical properties. The proposed idea is perfectly suited to be grafted onto existing electrodeposition installations, but it can be applied successfully in the development of new such plants. Complex command and control systems are designed to operate in high aggressive environmental conditions specific to these types of installations. The theoretical part completes the experimental results obtained on a laboratory facility.

  19. Welfare Effects of Agricultural Technology adoption: the case of improved groundnut varieties in rural Malawi

    OpenAIRE

    Simtowe, Franklin; Kassie, Menale; Asfaw, Solomon; Shiferaw, Bekele A.; Monyo, Emmanuel; Siambi, Moses

    2012-01-01

    This paper applies a program evaluation technique to assess the causal effect of the adoption of improved groundnut technologies on consumption expenditure and poverty measured by headcount, poverty gap and poverty severity indices. The paper is based on a cross-sectional farm household level data collected in 2008 from a sample of 594 households in rural Malawi. A sensitivity analysis is conducted to test the robustness of the propensity score based results using the rbounds test and the mea...

  20. Improving internal communication between marketing and technology functions for successful new food product development

    DEFF Research Database (Denmark)

    Jacobsen, Lina; Grunert, Klaus G; Søndergaard, Helle Alsted

    2014-01-01

    and technology experts within the NPD process from a food industry point of view. The review provides practical implications for improving internal communication in food companies and identifies knowledge gaps. By focusing on optimising organisational structure, team composition, management support......In order to increase the new product development (NPD) success for novel food products, it is crucial to understand how information can be optimally disseminated within companies. This systematic literature review concentrates on factors influencing internal communication between market...

  1. Suggestions to Improve Marketing in Anhui Huidian Science &Technology Co. Ltd

    OpenAIRE

    Zhang, Yan

    2014-01-01

    An excellent marketing plan is very important for a company in order to make great development. And in 2014, Huidian Company is planning to go public. Now they try to develop their business and build their core competitiveness. In this most significant time, a comprehensive marketing plan is urgently needed. The purpose of this thesis is giving Anhui Huidian Science & Technology Co. Ltd some suggestions to improve their marketing. The main things in research process were analyzing the mar...

  2. Improvements of task performance in daily life after acquired brain injury using commonly available everyday technology.

    OpenAIRE

    Lindén, Anita; Lexell, Jan; Larsson Lund, Maria

    2011-01-01

    Purpose. To investigate how individualised occupation-based interventions with commonly available everyday technology (ET) can compensate for perceived difficulties with daily life tasks after an aquired brain injury (ABI) and improve satisfaction with occupational performance. Method. This intervention study was designed as a multiple case study according to Yin. Ten men and women with an ABI (traumatic or non-traumatic) participated. Data were collected through interviews, observations and ...

  3. Coal-oil coprocessing at HTI - development and improvement of the technology

    Energy Technology Data Exchange (ETDEWEB)

    Stalzer, R.H.; Lee, L.K.; Hu, J.; Comolli, A. [Hydrocarbon Technologies, Inc., Lawrenceville, NJ (United States)

    1995-12-31

    Co-Processing refers to the combined processing of coal and petroleum-derived heavy oil feedstocks. The coal feedstocks used are those typically utilized in direct coal liquefaction: bituminous, subbituminous, and lignites. Petroleum-derived oil, is typically a petroleum residuum, containing at least 70 W% material boiling above 525{degrees}C. The combined coal and oil feedstocks are processed simultaneously with the dual objective of liquefying the coal and upgrading the petroleum-derived residuum to lower boiling (<525{degrees}C) premium products. HTI`s investigation of the Co-Processing technology has included work performed in laboratory, bench and PDU scale operations. The concept of co-processing technology is quite simple and a natural outgrowth of the work done with direct coal liquefaction. A 36 month program to evaluate new process concepts in coal-oil coprocessing at the bench-scale was begun in September 1994 and runs until September 1997. Included in this continuous bench-scale program are provisions to examine new improvements in areas such as: interstage product separation, feedstock concentrations (coal/oil), improved supported/dispersed catalysts, optimization of reactor temperature sequencing, and in-line hydrotreating. This does not preclude other ideas from DOE contracts and other sources that can lead to improved product quality and economics. This research work has led to important findings which significantly increased liquid yields, improved product quality, and improved process economics.

  4. An integrated approach for developing a technology strategy framework for small- to medium-sized furniture manufacturers to improve competitiveness

    Directory of Open Access Journals (Sweden)

    Lourens, A.S.

    2013-05-01

    Full Text Available Low-technology firms, such as those found within the furniture manufacturing industry, have no framework or methodology to guide them successfully to acquire and integrate technology that enables them to operate more competitively. The aim of this article is to illustrate the development of a technology strategy framework for small- to medium-sized furniture manufacturers to assist them to improve their competitiveness. More specifically, this article presents an integrated technology strategy framework that enables management to integrate their business strategy with their technology requirements successfully, thus improving competitiveness.

  5. Improving Social Support for Older Adults Through Technology: Findings From the PRISM Randomized Controlled Trial.

    Science.gov (United States)

    Czaja, Sara J; Boot, Walter R; Charness, Neil; Rogers, Wendy A; Sharit, Joseph

    2017-02-15

    Information and communication technology holds promise in terms of providing support and reducing isolation among older adults. We evaluated the impact of a specially designed computer system for older adults, the Personal Reminder Information and Social Management (PRISM) system. The trial was a multisite randomized field trial conducted at 3 sites. PRISM was compared to a Binder condition wherein participants received a notebook that contained paper content similar to that contained in PRISM. The sample included 300 older adults at risk for social isolation who lived independently in the community (Mage = 76.15 years). Primary outcome measures included indices of social isolation, social support, loneliness, and well-being. Secondary outcome measures included indices of computer proficiency and attitudes toward technology. Data were collected at baseline and at 6 and 12 months post-randomization. The PRISM group reported significantly less loneliness and increased perceived social support and well-being at 6 months. There was a trend indicating a decline in social isolation. Group differences were not maintained at 12 months, but those in the PRISM condition still showed improvements from baseline. There was also an increase in computer self-efficacy, proficiency, and comfort with computers for PRISM participants at 6 and 12 months. The findings suggest that access to technology applications such as PRISM may enhance social connectivity and reduce loneliness among older adults and has the potential to change attitudes toward technology and increase technology self-efficacy.

  6. Adoption of Improved Agroforestry Technologies among Contact Farmers in Imo State, Nigeria

    Directory of Open Access Journals (Sweden)

    Agomuo Florence Ozioma

    2012-03-01

    Full Text Available The study examined the adoption of improved agroforestry technologies among farmers in Imo State. To achieve the study objectives, structured questionnaire were designed and administered to ninety farmers who were selected using a multistage random sampling technique. Data collected were analysed using descriptive statistics regression analysis and Pearson product moment correlation (PPMC. Findings shows that the farmers were mainly small scale middle aged married men with secondary education and no access to credit. The average house hold size, farming experience and annual income of the farmers were 6 person, 15.5 years and N 148, 255.6 respectively with two contacts with extension agents on monthly basis. The results indicated that the farmers were largely aware of Gnetum Africana and have adopted plantain/banana technology. The mean adoption rate of agroforestry technologies was 33.81%. The main determinants of the adoption were farmers’ age, educational level, farm size, income, access to credit and extension contact as this variables were all significant. Apart from age of the farmers which was negatively related to adoption of agroforestry technologies all other variables mentioned affected the adoption rate of agroforestry technologies positively. Based on the findings, it was strongly recommended that farmers be provided with loans at concessionary interest rates to solve their financial problem of adopting innovations.

  7. Adoption of Improved Agroforestry Technologies among Contact Farmers in Imo State, Nigeria

    Directory of Open Access Journals (Sweden)

    Orisakwe Lambert

    2012-06-01

    Full Text Available The study examined the adoption of improved agroforestry technologies among farmers in Imo State. To achieve the study objectives, structured questionnaire were designed and administered to ninety farmers who were selected using a multistage random sampling technique. Data collected were analysed using descriptive statistics regression analysis and Pearson product moment correlation (PPMC. Findings shows that the farmers were mainly small scale middle aged married men with secondary education and no access to credit. The average house hold size, farming experience and annual income of the farmers were 6 person, 15.5 years and N 148,255.6 respectively with two contacts with extension agents on monthly basis. The results indicated that the farmers were largely aware of Gnetum Africana and have adopted plantain/banana technology. The mean adoption rate of agroforestry technologies was 33.81%. The main determinants of the adoption were farmers’ age, educational level, farm size, income, access to credit and extension contact as this variables were all significant. Apart from age of the farmers which was negatively related to adoption of agroforestry technologies all other variables mentioned affected the adoption rate of agroforestry technologies positively. Based on the findings, it was strongly recommended that farmers be provided with loans at concessionary interest rates to solve their financial problem of adopting innovations.

  8. Analysis of Technological Innovation and Environmental Performance Improvement in Aviation Sector

    Directory of Open Access Journals (Sweden)

    Jeonghoon Mo

    2011-09-01

    Full Text Available The past oil crises have caused dramatic improvements in fuel efficiency in all industrial sectors. The aviation sector—aircraft manufacturers and airlines—has also made significant efforts to improve the fuel efficiency through more advanced jet engines, high-lift wing designs, and lighter airframe materials. However, the innovations in energy-saving aircraft technologies do not coincide with the oil crisis periods. The largest improvement in aircraft fuel efficiency took place in the 1960s while the high oil prices in the 1970s and on did not induce manufacturers or airlines to achieve a faster rate of innovation. In this paper, we employ a historical analysis to examine the socio-economic reasons behind the relatively slow technological innovation in aircraft fuel efficiency over the last 40 years. Based on the industry and passenger behaviors studied and prospects for alternative fuel options, this paper offers insights for the aviation sector to shift toward more sustainable technological options in the medium term. Second-generation biofuels could be the feasible option with a meaningful reduction in aviation’s lifecycle environmental impact if they can achieve sufficient economies of scale.

  9. New and improved technology for manufacture of GMT primary mirror segments

    Science.gov (United States)

    Kim, Dae Wook; Burge, James H.; Davis, Jonathan M.; Martin, Hubert M.; Tuell, Michael T.; Graves, Logan R.; West, Steve C.

    2016-07-01

    The Giant Magellan Telescope (GMT) primary mirror consists of seven 8.4 m light-weight honeycomb mirrors that are being manufactured at the Richard F. Caris Mirror Lab (RFCML), University of Arizona. In order to manufacture the largest and most aspheric astronomical mirrors various high precision fabrication technologies have been developed, researched and implemented at the RFCML. The unique 8.4 m (in mirror diameter) capacity fabrication facilities are fully equipped with large optical generator (LOG), large polishing machine (LPM), stressed lap, rigid conformal lap (RC lap) and their process simulation/optimization intelligence called MATRIX. While the core capability and key manufacturing technologies have been well demonstrated by completing the first GMT off-axis segment, there have been significant hardware and software level improvements in order to improve and enhance the GMT primary mirror manufacturing efficiency. The new and improved manufacturing technology plays a key role to realize GMT, the next generation extremely large telescope enabling new science and discoveries, with high fabrication efficiency and confidence.

  10. Analysis of technological innovation and environmental performance improvement in aviation sector.

    Science.gov (United States)

    Lee, Joosung; Mo, Jeonghoon

    2011-09-01

    The past oil crises have caused dramatic improvements in fuel efficiency in all industrial sectors. The aviation sector-aircraft manufacturers and airlines-has also made significant efforts to improve the fuel efficiency through more advanced jet engines, high-lift wing designs, and lighter airframe materials. However, the innovations in energy-saving aircraft technologies do not coincide with the oil crisis periods. The largest improvement in aircraft fuel efficiency took place in the 1960s while the high oil prices in the 1970s and on did not induce manufacturers or airlines to achieve a faster rate of innovation. In this paper, we employ a historical analysis to examine the socio-economic reasons behind the relatively slow technological innovation in aircraft fuel efficiency over the last 40 years. Based on the industry and passenger behaviors studied and prospects for alternative fuel options, this paper offers insights for the aviation sector to shift toward more sustainable technological options in the medium term. Second-generation biofuels could be the feasible option with a meaningful reduction in aviation's lifecycle environmental impact if they can achieve sufficient economies of scale.

  11. Improving the installation of renewable heating technology in UK social housing properties through user centred design.

    Science.gov (United States)

    Moore, Natalie; Haines, Victoria; Lilley, Debra

    2015-11-01

    Social housing organisations are increasingly installing renewable energy technologies, particularly for the provision of heating and hot water. To meet carbon reduction targets, uptake and installation must allow occupants to use the technology effectively. This paper describes research which investigated the service of installing heat pumps into UK social housing properties, from both landlords' and tenants' experiences. Adopting a user centred design approach, the research was in three phases: an exploration study to investigate landlords' and tenants' experiences of heat pump installation and use; refinement and development of the requirements for improved service delivery, primarily technology introduction and control; and the development and initial evaluation of an information leaflet as a key touchpoint in the service delivery. Recommendations for improved service delivery, to enable heat pumps to be accepted and used more effectively, are presented, as well as reflection on the process of applying user centred design in this context. In a relatively immature area of industry, installations to date have been heavily focused on technical aspects. This paper provides an insight into the human aspects of the service delivery of heat pumps in social housing, providing designers and social housing landlords with insight about how to improve the service.

  12. New Trends of E-commerce Development Brought by Chinese International Trade

    Institute of Scientific and Technical Information of China (English)

    Wen Xu

    2015-01-01

    e-commerce as a new trade, in the form of the current globalization of information and economic globalization, is with its strong competitive advantage and vitality, which can quickly spread to all areas of international business, and it changes in the international economic landscape had a profound impact. E-commerce is based on the rapid development of computer technology and the wide application is on the use of the Internet and advanced communications technology. It changes the the past, traditional physical trading and cash transactions, in a virtualization market, merchandise presentation via the web. With the online payment, the use of advanced materials and distribution logistics systems are for tangible and intangible commodities trading of a new trade. This new types of transactions overturn the traditional transaction methods, so that the whole business process, whether it is in the application of domestic and foreign trade, and has achieved the goal of online shopping and trading. E-commerce international trade transaction cost savings improve the efficiency of transactions; it changes in the foreign trade transaction process, the development of third-party trading platform is increasing the competitiveness of enterprises and the creation of employment opportunities in all aspects of a country' s foreign trade and the overall economy have had a significant impact. E-commerce is to establish a new economic and trade order, the already mature in the world trading system and the order is being re-shuffling of the emerging e-commerce trade. China is the world' s top-ranked in the world' s total import and export trade power, is under the wave of e-commerce, the difficulties, we should seize opportunities, and meet challenges.

  13. Technology as a force for improved diagnosis and treatment of breast disease

    Science.gov (United States)

    Holloway, Claire M.B.; Easson, Alexandra; Escallon, Jaime; Leong, Wey Liang; Quan, May Lynn; Reedjik, Michael; Wright, Frances C.; McCready, David R.

    2010-01-01

    Increasing numbers of women are seeking evaluation of screen-detected breast abnormalities, and more women with breast cancer are living with the consequences of treatment. Improved technologies have helped to individualize diagnostic evaluation and treatment, improve efficacy and minimize morbidity. This article highlights some of these technologies. Superior imaging techniques have improved breast cancer screening and show promise for intraoperative surgical guidance and postoperative specimen evaluation. Digital mammography improves the sensitivity of mammography for women younger than 50 years with dense breasts, and tomosynthesis may improve specificity. Magnetic resonance imaging provides sensitive delineation of the extent of the disease and superior screening for women with a greater than 25% lifetime risk of breast cancer Minimally invasive techniques have been developed for the assessment of intraductal lesions, biopsy of imaging abnormalities, staging of the axilla and breast radiotherapy. Ductoscopy facilitates intraductal biopsy and localization of lesions for excision, sentinel lymph node biopsy is becoming standard for axillary staging, and intraoperative radiotherapy has the potential to reduce treatment time and morbidity. Three-dimensional imaging allows correlation of final histology with preoperative imaging for superior margin assessment. Related techniques show promise for translation to the intraoperative setting for surgical guidance. New classifications of breast cancers based on gene expression, rather than morphology, describe subtypes with different prognoses and treatment implications, and new targeted therapies are emerging. Genetic fingerprints that predict treatment response and outcomes are being developed to assign targeted treatments to individual patients likely to benefit. Surgeons play a vital role in the successful integration of new technologies into practice. PMID:20646402

  14. Modeling the impact of improved aircraft operations technologies on the environment and airline behavior

    Science.gov (United States)

    Foley, Ryan Patrick

    The overall goal of this thesis is to determine if improved operations technologies are economically viable for US airlines, and to determine the level of environmental benefits available from such technologies. Though these operational changes are being implemented primarily with the reduction of delay and improvement of throughput in mind, economic factors will drive the rate of airline adoption. In addition, the increased awareness of environmental impacts makes these effects an important aspect of decision-making. Understanding this relationship may help policymakers make decisions regarding implementation of these advanced technologies at airports, and help airlines determine appropriate levels of support to provide for these new technologies. In order to do so, the author models the behavior of a large, profit-seeking airline in response to the introduction of advanced equipage allowing improved operations procedures. The airline response included changes in deployed fleet, assignment of aircraft to routes, and acquisition of new aircraft. From these responses, changes in total fleet-level CO2 emissions and airline profit were tallied. As awareness of the environmental impact of aircraft emissions has grown, several agencies (ICAO, NASA) have moved to place goals for emissions reduction. NASA, in particular, has set goals for emissions reduction through several areas of aircraft technology. Among these are "Operational Improvements," technologies available in the short-term through avionics and airport system upgrades. The studies in this thesis make use of the Fleet-Level Environmental Evaluation Tool (FLEET), a simulation tool developed by Purdue University in support of a NASA-sponsored research effort. This tool models the behavior of a large, profit-seeking airline through an allocation problem. The problem is contained within a systems dynamics type approach that allows feedback between passenger demand, ticket price, and the airline fleet composition

  15. Cloud and Web Technologies: Technical Improvements and Their Implications on E-Governance

    Directory of Open Access Journals (Sweden)

    Danish Manzoor

    2014-06-01

    Full Text Available Cloud computing technology helps to improve ICT based services like e-governance execution and create new business opportunities and their implementation. Cloud computing is an evolution of web based internet application and describes an advance consumption, supplement and delivery model for Information Technology and ICT services based on the global network. This enables allocation of resources and costs across a large pool of users while providing on-demand services with dynamic scalability. So we can say that a technology that has the capability and potential to offer solutions for e-governance is cloud computing. Cloud computing provide service-oriented access to users least compromising on security. In today's era software and their services are biggest cost concern for the implementation of IT environment in an organization. Cloud has the capability to reduce the cost in dramatic way for the all kind of the organization even it is small scale Industry or a big corporate organization. This makes Cloud an excellent platform to host e-governance services and application. The basic intention of this paper is whatever improvement happening in cloud technology and in web technology mention sub sequentially. If we apply them in existing e-governance application running under various department then we can minimize the some of the most basic affected components of application software like cost of the software in its execution, optimal time for usage and running of application software, storage capacity for storing of the data and network infrastructure used for the functioning of the application software.

  16. Modern technologies for improving cleaning and disinfection of environmental surfaces in hospitals

    Directory of Open Access Journals (Sweden)

    John M. Boyce

    2016-04-01

    Full Text Available Abstract Experts agree that careful cleaning and disinfection of environmental surfaces are essential elements of effective infection prevention programs. However, traditional manual cleaning and disinfection practices in hospitals are often suboptimal. This is often due in part to a variety of personnel issues that many Environmental Services departments encounter. Failure to follow manufacturer’s recommendations for disinfectant use and lack of antimicrobial activity of some disinfectants against healthcare-associated pathogens may also affect the efficacy of disinfection practices. Improved hydrogen peroxide-based liquid surface disinfectants and a combination product containing peracetic acid and hydrogen peroxide are effective alternatives to disinfectants currently in widespread use, and electrolyzed water (hypochlorous acid and cold atmospheric pressure plasma show potential for use in hospitals. Creating “self-disinfecting” surfaces by coating medical equipment with metals such as copper or silver, or applying liquid compounds that have persistent antimicrobial activity surfaces are additional strategies that require further investigation. Newer “no-touch” (automated decontamination technologies include aerosol and vaporized hydrogen peroxide, mobile devices that emit continuous ultraviolet (UV-C light, a pulsed-xenon UV light system, and use of high-intensity narrow-spectrum (405 nm light. These “no-touch” technologies have been shown to reduce bacterial contamination of surfaces. A micro-condensation hydrogen peroxide system has been associated in multiple studies with reductions in healthcare-associated colonization or infection, while there is more limited evidence of infection reduction by the pulsed-xenon system. A recently completed prospective, randomized controlled trial of continuous UV-C light should help determine the extent to which this technology can reduce healthcare-associated colonization and infections

  17. Modern technologies for improving cleaning and disinfection of environmental surfaces in hospitals.

    Science.gov (United States)

    Boyce, John M

    2016-01-01

    Experts agree that careful cleaning and disinfection of environmental surfaces are essential elements of effective infection prevention programs. However, traditional manual cleaning and disinfection practices in hospitals are often suboptimal. This is often due in part to a variety of personnel issues that many Environmental Services departments encounter. Failure to follow manufacturer's recommendations for disinfectant use and lack of antimicrobial activity of some disinfectants against healthcare-associated pathogens may also affect the efficacy of disinfection practices. Improved hydrogen peroxide-based liquid surface disinfectants and a combination product containing peracetic acid and hydrogen peroxide are effective alternatives to disinfectants currently in widespread use, and electrolyzed water (hypochlorous acid) and cold atmospheric pressure plasma show potential for use in hospitals. Creating "self-disinfecting" surfaces by coating medical equipment with metals such as copper or silver, or applying liquid compounds that have persistent antimicrobial activity surfaces are additional strategies that require further investigation. Newer "no-touch" (automated) decontamination technologies include aerosol and vaporized hydrogen peroxide, mobile devices that emit continuous ultraviolet (UV-C) light, a pulsed-xenon UV light system, and use of high-intensity narrow-spectrum (405 nm) light. These "no-touch" technologies have been shown to reduce bacterial contamination of surfaces. A micro-condensation hydrogen peroxide system has been associated in multiple studies with reductions in healthcare-associated colonization or infection, while there is more limited evidence of infection reduction by the pulsed-xenon system. A recently completed prospective, randomized controlled trial of continuous UV-C light should help determine the extent to which this technology can reduce healthcare-associated colonization and infections. In conclusion, continued efforts to

  18. Can Handheld Thermal Imaging Technology Improve Detection of Poachers in African Bushveldt?

    Directory of Open Access Journals (Sweden)

    Adam G Hart

    Full Text Available Illegal hunting (poaching is a global threat to wildlife. Anti-poaching initiatives are making increasing use of technology, such as infrared thermography (IRT, to support traditional foot and vehicle patrols. To date, the effectiveness of IRT for poacher location has not been tested under field conditions, where thermal signatures are often complex. Here, we test the hypothesis that IRT will increase the distance over which a poacher hiding in African scrub bushveldt can be detected relative to a conventional flashlight. We also test whether any increase in effectiveness is related to the cost and complexity of the equipment by comparing comparatively expensive (22,000 USD and relatively inexpensive (2000 USD IRT devices. To test these hypotheses we employ a controlled, fully randomised, double-blind procedure to find a poacher in nocturnal field conditions in African bushveldt. Each of our 27 volunteer observers walked three times along a pathway using one detection technology on each pass in randomised order. They searched a prescribed search area of bushveldt within which the target was hiding. Hiding locations were pre-determined, randomised, and changed with each pass. Distances of first detection and positive detection were noted. All technologies could be used to detect the target. Average first detection distance for flashlight was 37.3 m, improving by 19.8 m to 57.1 m using LIRT and by a further 11.2m to 68.3m using HIRT. Although detection distances were significantly greater for both IRTs compared to flashlight, there was no significant difference between LIRT and HIRT. False detection rates were low and there was no significant association between technology and accuracy of detection. Although IRT technology should ideally be tested in the specific environment intended before significant investment is made, we conclude that IRT technology is promising for anti-poaching patrols and that for this purpose low cost IRT units are as

  19. Can Handheld Thermal Imaging Technology Improve Detection of Poachers in African Bushveldt?

    Science.gov (United States)

    Hart, Adam G; Rolfe, Richard N; Dandy, Shantelle; Stubbs, Hannah; MacTavish, Dougal; MacTavish, Lynne; Goodenough, Anne E

    2015-01-01

    Illegal hunting (poaching) is a global threat to wildlife. Anti-poaching initiatives are making increasing use of technology, such as infrared thermography (IRT), to support traditional foot and vehicle patrols. To date, the effectiveness of IRT for poacher location has not been tested under field conditions, where thermal signatures are often complex. Here, we test the hypothesis that IRT will increase the distance over which a poacher hiding in African scrub bushveldt can be detected relative to a conventional flashlight. We also test whether any increase in effectiveness is related to the cost and complexity of the equipment by comparing comparatively expensive (22,000 USD) and relatively inexpensive (2000 USD) IRT devices. To test these hypotheses we employ a controlled, fully randomised, double-blind procedure to find a poacher in nocturnal field conditions in African bushveldt. Each of our 27 volunteer observers walked three times along a pathway using one detection technology on each pass in randomised order. They searched a prescribed search area of bushveldt within which the target was hiding. Hiding locations were pre-determined, randomised, and changed with each pass. Distances of first detection and positive detection were noted. All technologies could be used to detect the target. Average first detection distance for flashlight was 37.3 m, improving by 19.8 m to 57.1 m using LIRT and by a further 11.2m to 68.3m using HIRT. Although detection distances were significantly greater for both IRTs compared to flashlight, there was no significant difference between LIRT and HIRT. False detection rates were low and there was no significant association between technology and accuracy of detection. Although IRT technology should ideally be tested in the specific environment intended before significant investment is made, we conclude that IRT technology is promising for anti-poaching patrols and that for this purpose low cost IRT units are as effective as units

  20. Improving the quality of cancer care in America through health information technology.

    Science.gov (United States)

    Feeley, Thomas W; Sledge, George W; Levit, Laura; Ganz, Patricia A

    2014-01-01

    A recent report from the Institute of Medicine titled Delivering High-Quality Cancer Care: Charting a New Course for a System in Crisis, identifies improvement in information technology (IT) as essential to improving the quality of cancer care in America. The report calls for implementation of a learning healthcare IT system: a system that supports patient-clinician interactions by providing patients and clinicians with the information and tools necessary to make well informed medical decisions and to support quality measurement and improvement. While some elements needed for a learning healthcare system are already in place for cancer, they are incompletely implemented, have functional deficiencies, and are not integrated in a way that creates a true learning healthcare system. To achieve the goal of a learning cancer care delivery system, clinicians, professional organizations, government, and the IT industry will have to partner, develop, and incentivize participation.

  1. United States Supports Distributed Wind Technology Improvements; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Sinclair, Karin

    2015-06-15

    This presentation provides information on the activities conducted through the Competitiveness Improvement Project (CIP), initiated in 2012 by the U.S. Department of Energy (DOE) and executed through the National Renewable Energy Laboratory (NREL) to support the distributed wind industry. The CIP provides research and development funding and technical support to improve distributed wind turbine technology and increase the competitiveness of U.S. small and midsize wind turbine manufacturers. Through this project, DOE/NREL assists U.S. manufacturers to lower the levelized cost of energy of wind turbines through component improvements, manufacturing process upgrades, and turbine testing. Ultimately, this support is expected to lead to turbine certification through testing to industry-recognized wind turbine performance and safety standards.

  2. Torn ACL: A New Bioengineered Substitute Brought from the Laboratory to the Knee Joint

    Directory of Open Access Journals (Sweden)

    Francine Goulet

    2004-01-01

    Full Text Available Anterior cruciate ligament (ACL injuries occur at an annual rate of 120 000 in the USA, and many need reconstructive surgery. We report successful results at 1–13 months following implantation of bioengineered ACL (bACL in goats. A bACL has been developed using autologous ACL cells, a collagen matrix and bone plugs. The extremities of the bACL were fully integrated into the femur and tibia of the host. Vascularisation of the grafts was extensive 1 month post-surgery and improved with time. At 6 months post-grafting, histological and ultrastructural observations demonstrated a highly organised ligamentous structure, rich in type I collagen fibres and fibroblasts. At the implants' insertion sites, characteristic fibrocartilage was observed having well aligned chondrocytes and collagen fibrils. After a year, mechanical rupture of the grafts demonstrated a major gain in strength. Eventual applications of this new technology in humans include multiple uses in orthopaedic, dental and reconstructive surgeries.

  3. Deterioration of pre-existing hemiparesis brought about by subsequent ipsilateral lacunar infarction.

    Science.gov (United States)

    Ago, T; Kitazono, T; Ooboshi, H; Takada, J; Yoshiura, T; Mihara, F; Ibayashi, S; Iida, M

    2003-08-01

    Mechanisms of post-stroke recovery are still poorly understood. Recent evidence suggests that cortical reorganisation in the unaffected hemisphere plays an important role. A 59 year old man developed a small lacunar infarct in the left corona radiata, which then caused marked deterioration in a pre-existing left hemiparesis that had resulted from an earlier right putaminal haemorrhage. Functional magnetic resonance imaging showed that the paretic left hand grip activated the ipsilateral left motor areas, but not the right hemispheric motor areas. This suggests that partial recovery of the left hemiparesis had been brought about by cortical reorganisation of the left hemisphere and intensification of the uncrossed corticospinal tract. The subsequent small infarct may have damaged the uncrossed tract, thereby causing the pre-existing hemiparesis to deteriorate even further.

  4. Measurement and improvement of indoor air quality in an information technology classroom

    Directory of Open Access Journals (Sweden)

    Tomić Mladen A.

    2014-01-01

    Full Text Available With the rapid development of information technology equipment and its use in the teaching and learning activities, the working environment (especially indoor air quality in which students and pupils spend a great deal of time in educational institutions has been changing. Therefore, special attention must be paid to indoor air quality and comfort. It is of great importance to maintain indoor air quality in an object, such as information technology classrooms, where a large number of students spend long periods of time. Poor indoor environment can negatively affect scholarly performances and cause discomfort and poor work performance. The problem of indoor air quality in educational institutions can be more serious than in other types of objects, because of the higher concentration of students and information technology equipment. This paper analyzes the changes in air quality in an information technology classrooms, when occupied with students, for the period from March to April. The changes of indoor air temperature, relative humidity, and carbon dioxide concentration are monitored in the classroom, as well as outdoor temperature and relative humidity. Several cases are studied: the classroom with closed windows and doors (closed classroom, the classroom with natural ventilation, the classroom cooled with a split system (cooled classroom. Responses of students are followed for each case. The analysis is performed based on the measurement results and numerical simulations using the computational fluid dynamics package, and measures are proposed to improve the indoor air quality in the considered classroom.

  5. Innovative, wearable snap connector technology for improved device networking in electronic garments

    Science.gov (United States)

    Kostrzewski, Andrew A.; Lee, Kang S.; Gans, Eric; Winterhalter, Carole A.; Jannson, Tomasz P.

    2007-04-01

    This paper discusses Physical Optics Corporation's (POC) wearable snap connector technology that provides for the transfer of data and power throughout an electronic garment (e-garment). These connectors resemble a standard garment button and can be mated blindly with only one hand. Fully compatible with military clothing, their application allows for the networking of multiple electronic devices and an intuitive method for adding/removing existing components from the system. The attached flexible cabling also permits the rugged snap connectors to be fed throughout the standard webbing found in military garments permitting placement in any location within the uniform. Variations of the snap electronics/geometry allow for integration with USB 2.0 devices, RF antennas, and are capable of transferring high bandwidth data streams such as the 221 Mbps required for VGA video. With the trend towards providing military officers with numerous electronic devices (i.e., heads up displays (HMD), GPS receiver, PDA, etc), POC's snap connector technology will greatly improve cable management resulting in a less cumbersome uniform. In addition, with electronic garments gaining widespread adoption in the commercial marketplace, POC's technology is finding applications in such areas as sporting good manufacturers and video game technology.

  6. Application of avidin-biotin technology to improve cell adhesion on nanofibrous matrices.

    Science.gov (United States)

    Pan, Jian-feng; Liu, Ning-hua; Shu, Lin-yuan; Sun, Hui

    2015-05-16

    Electrospinning is an easy and effective technique to produce submicron fibers possessing a range of attractive characteristics such as interconnected porous structures similar to natural ECM and good resilience to movement. Rapid and efficient cell attachment to nanofibrous matrices is a necessary prerequisite in tissue engineering. Thus, the aim of this study is to evaluate poly(ε-caprolactone-co-lactide)/Pluronic (PLCL/Pluronic) nanofibrous matrices with avidin-biotin technology for improving cell adhesion for the first time. PLCL/Pluronic nanofibers had relatively homogeneous fibers and interconnected porous structures. Pluronic significantly modified the hydrophilicity of nanofibrous matrices and PLCL/Pluronic nanofibrous matrices had better performance on maintaining cell proliferation. Avidin-biotin technology had no negative effect on the hydrophilic property, mechanical property and cell proliferation. Meanwhile, the attachment and spreading of adipose-derived stem cells (ADSCs) onto PLCL/Pluronic nanofibrous matrices with avidin-biotin technology was promoted obviously. PLCL/Pluronic nanofibrous matrices inheriting the excellent characteristics of both PLCL and Pluronic have the better cell adhesion ability through avidin-biotin technology, implying a promising application in skin care, tissue regeneration and other related area.

  7. Photovoltaic Manufacturing Technology (PVMaT) improvements for ENTECH's concentrator module

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, M.J.; McDanal, A.J.; Perry, J.L.; Jackson, M.C.; Walters, R.R. (ENTECH, Inc., Dallas-Fort Worth Airport, TX (United States))

    1991-11-01

    This final technical report documents ENTECH's Phase 1 contract with Photovoltaic Manufacturing Technology (PVMaT) project. Under this project we prepared a detailed description of our current manufacturing process for making our unique linear Fresnel lens photovoltaic concentrator modules. In addition, we prepared a detailed description of an improved manufacturing process, which will simultaneously increase module production rates, enhance module quality, and substantially reduce module costs. We also identified potential problems in implementing the new manufacturing process, and we proposed solutions to these anticipated problems. Before discussing the key results of our program, however, we present a brief description of our unique photovoltaic technology. The key conclusion of our PVMAT Phase 1 study is that our module technology, without further breakthroughs, can realistically meet the near-term DOE goal of 12 cents/kWh levelized electricity cost, provided that we successfully implement the new manufacturing process at a production volume of at least 10 megawatts per year. The key recommendation from our Phase 1 study is to continue our PVMaT project into Phase 2A, which is directed toward the actual manufacturing technology development required for our new module production process. 15 refs.

  8. Hybrid breeding in wheat: technologies to improve hybrid wheat seed production.

    Science.gov (United States)

    Whitford, Ryan; Fleury, Delphine; Reif, Jochen C; Garcia, Melissa; Okada, Takashi; Korzun, Viktor; Langridge, Peter

    2013-12-01

    Global food security demands the development and delivery of new technologies to increase and secure cereal production on finite arable land without increasing water and fertilizer use. There are several options for boosting wheat yields, but most offer only small yield increases. Wheat is an inbred plant, and hybrids hold the potential to deliver a major lift in yield and will open a wide range of new breeding opportunities. A series of technological advances are needed as a base for hybrid wheat programmes. These start with major changes in floral development and architecture to separate the sexes and force outcrossing. Male sterility provides the best method to block self-fertilization, and modifying the flower structure will enhance pollen access. The recent explosion in genomic resources and technologies provides new opportunities to overcome these limitations. This review outlines the problems with existing hybrid wheat breeding systems and explores molecular-based technologies that could improve the hybrid production system to reduce hybrid seed production costs, a prerequisite for a commercial hybrid wheat system.

  9. Improvement of Project Portfolio Management in an Information Technology Consulting Company

    Science.gov (United States)

    Kaewta, S.; Chutima, P.

    2014-06-01

    The scope of this research is to improve the efficiency of multiple project management in an information technology consulting company through the adaptation of the project portfolio management technique. The project management information system (PMIS) is implemented to establish effective communication channels so that internal and external teams as well as all relevant stakeholders can be employed to negotiate their work schedules. In addition, all activities created by multiple teams can be systematically reviewed and combined into a single checklist to be used as an agreed working plan for all team members. A general guideline for project portfolio management in information technology consulting companies is also proposed, which could results in a higher level of project on-time delivery.

  10. Overview and appraisal of the current concept and technologies for improvement of sublingual drug delivery.

    Science.gov (United States)

    Wang, Zhijun; Chow, Moses Ss

    2014-07-01

    Sublingual drug delivery is capable of achieving high bioavailability by avoiding first-pass liver extraction and enzymatic degradation in the gastrointestinal tract, as well as achieving rapid onset of effect. Thus, this route of administration can offer attractive therapeutic advantages for certain drugs as a convenient substitute for parenteral administration and has been applied successfully to a number of therapeutic conditions, especially urgent cardiovascular conditions and acute severe pain control. However, due to inherent limitations such as small sublingual mucosa area for absorption, primarily passive mechanism of transport, short residence time, and potential local irritation, a relatively small number of sublingual products have been successfully developed to date. In this Review, key concepts and technologies for potential improvement of sublingual drug delivery are reviewed. The optimal application of these concepts and technologies, together with clinical need for non-parenteral delivery, will hopefully broaden the development of sublingual drug delivery in the future.

  11. Can eye-tracking technology improve situational awareness in paramedic clinical education?

    Directory of Open Access Journals (Sweden)

    Williams B

    2013-11-01

    Full Text Available Brett Williams,1 Andrew Quested,1 Simon Cooper21Department of Community Emergency Health and Paramedic Practice, 2School of Nursing and Midwifery, Berwick, Monash University, Frankston, VIC, AustraliaAbstract: Human factors play a significant part in clinical error. Situational awareness (SA means being aware of one's surroundings, comprehending the present situation, and being able to predict outcomes. It is a key human skill that, when properly applied, is associated with reducing medical error: eye-tracking technology can be used to provide an objective and qualitative measure of the initial perception component of SA. Feedback from eye-tracking technology can be used to improve the understanding and teaching of SA in clinical contexts, and consequently, has potential for reducing clinician error and the concomitant adverse events.Keywords: eye-tracking, paramedic, situational awareness, medical error, pre hospital

  12. A Measurement Management Technology for Improving Energy Efficiency in Data Centers and Telecommunication Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Hendrik Hamann, Levente Klein

    2012-06-28

    Data center (DC) electricity use is increasing at an annual rate of over 20% and presents a concern for the Information Technology (IT) industry, governments, and the society. A large fraction of the energy use is consumed by the compressor cooling to maintain the recommended operating conditions for IT equipment. The most common way to improve the DC efficiency is achieved by optimally provisioning the cooling power to match the global heat dissipation in the DC. However, at a more granular level, the large range of heat densities of today's IT equipment makes the task of provisioning cooling power optimized to the level of individual computer room air conditioning (CRAC) units much more challenging. Distributed sensing within a DC enables the development of new strategies to improve energy efficiency, such as hot spot elimination through targeted cooling, matching power consumption at rack level with workload schedule, and minimizing power losses. The scope of Measurement and Management Technologies (MMT) is to develop a software tool and the underlying sensing technology to provide critical decision support and control for DC and telecommunication facilities (TF) operations. A key aspect of MMT technology is integration of modeling tools to understand how changes in one operational parameter affect the overall DC response. It is demonstrated that reduced ordered models for DC can generate, in less than 2 seconds computational time, a three dimensional thermal model in a 50 kft{sup 2} DC. This rapid modeling enables real time visualization of the DC conditions and enables 'what if' scenarios simulations to characterize response to 'disturbances'. One such example is thermal zone modeling that matches the cooling power to the heat generated at a local level by identifying DC zones cooled by a specific CRAC. Turning off a CRAC unit can be simulated to understand how the other CRAC utilization changes and how server temperature responds

  13. Improved information processing and dissemination through the introduction of new technology

    Energy Technology Data Exchange (ETDEWEB)

    Spath, C E; Marsh, Jr, F E

    1983-10-01

    This paper discusses the following topic on information technology: technology signals a liberation; application of information technology; optical character recognition; optical memories; and planning considerations and the future.

  14. The effects of improved maize technology on household welfare in Buruku, Benue State, Nigeria

    Directory of Open Access Journals (Sweden)

    Victoria I. Audu

    2014-12-01

    Full Text Available This study was carried out to determine the welfare effects of improved maize technology in Buruku Local Government Area of Benue State, Nigeria. The study also examined the determinants of the adoption of improved maize technology. Structured questionnaires were used in collecting the primary data for the study. A multi-stage random technique was used in selecting 125 farm households for the study. The Logit and ordinary least square (OLS models were used in analyzing the data. The OLS results show that adoption of improved maize varieties is positively and significantly related to household welfare and thus has contributed to moving farm households out of poverty. Other variables found to be statistically significant in explaining household welfare are education, household size, and landholding. The Logit results show that age, household size, off-farm income, and education were found to be significant in influencing farmers’ adoption decisions. Some robustness checks were performed with different specifications of the Logit and OLS models as well as re-estimation with propensity matching score approach. Overall, the results are robust to different specifications.

  15. Minimally Invasive Spine Metastatic Tumor Resection and Stabilization: New Technology Yield Improved Outcome.

    Science.gov (United States)

    Harel, Ran; Doron, Omer; Knoller, Nachshon

    2015-01-01

    Spinal metastases compressing the spinal cord are a medical emergency and should be operated on if possible; however, patients' medical condition is often poor and surgical complications are common. Minimizing surgical extant, operative time, and blood loss can potentially reduce postoperative complications. This is a retrospective study describing the patients operated on in our department utilizing a minimally invasive surgery (MIS) approach to decompress and instrument the spine from November 2013 to November 2014. Five patients were operated on for thoracic or lumbar metastases. In all cases a unilateral decompression with expandable tubular retractor was followed by instrumentation of one level above and below the index level and additional screw at the index level contralateral to the decompression side. Cannulated fenestrated screws were used (Longitude FNS) and cement was injected to increase pullout resistance. Mean operative time was 134 minutes and estimated blood loss was minimal in all cases. Improvement was noticeable in neurological status, function, and pain scores. No complications were observed. Technological improvements in spinal instruments facilitate shorter and safer surgeries in oncologic patient population and thus reduce the complication rate. These technologies improve patients' quality of life and enable the treatment of patients with comorbidities.

  16. Minimally Invasive Spine Metastatic Tumor Resection and Stabilization: New Technology Yield Improved Outcome

    Directory of Open Access Journals (Sweden)

    Ran Harel

    2015-01-01

    Full Text Available Spinal metastases compressing the spinal cord are a medical emergency and should be operated on if possible; however, patients’ medical condition is often poor and surgical complications are common. Minimizing surgical extant, operative time, and blood loss can potentially reduce postoperative complications. This is a retrospective study describing the patients operated on in our department utilizing a minimally invasive surgery (MIS approach to decompress and instrument the spine from November 2013 to November 2014. Five patients were operated on for thoracic or lumbar metastases. In all cases a unilateral decompression with expandable tubular retractor was followed by instrumentation of one level above and below the index level and additional screw at the index level contralateral to the decompression side. Cannulated fenestrated screws were used (Longitude FNS and cement was injected to increase pullout resistance. Mean operative time was 134 minutes and estimated blood loss was minimal in all cases. Improvement was noticeable in neurological status, function, and pain scores. No complications were observed. Technological improvements in spinal instruments facilitate shorter and safer surgeries in oncologic patient population and thus reduce the complication rate. These technologies improve patients’ quality of life and enable the treatment of patients with comorbidities.

  17. A Comparison of Various Technological Options for Improving Energy and Water Use Efficiency in a Traditional Sugar Mill

    Directory of Open Access Journals (Sweden)

    Eyerusalem Birru

    2016-11-01

    Full Text Available This study is a comparison of four technological improvements proposed in previous works for the Cuban sugar mill Carlos Baliño. These technological options are: (1 utilization of excess wastewater for enhanced imbibition; (2 utilization of waste heat for thermally driven cooling; (3 utilization of excess bagasse for pellets; and (4 modification of the cogeneration unit for maximum electric power generation. The method used for the evaluation of the technological options involves using criteria such as energy saving, financial gains, and CO2 emission saving potential. The results of the analysis show that the first three technological improvement options are attractive only during the crushing season. On the other hand, the last technological improvement option can be attractive if a year round generation of surplus power is sought. The first technological improvement option leads to only minor changes in energy utilization, but the increase in sugar yield of 8.7% leads to attractive profitability with an extremely low payback period. The CO2 emissions saved due to the fourth technological improvement option are the highest (22,000 tonnes/year and the cost of CO2 emissions saved for the third technological improvement option (lowest amount to 41 USD/tonne of CO2 emissions saved. The cycle efficiencies of the third and fourth technological improvement options are 37.9% and 36.8%, respectively, with payback periods of 2.3 and 1.6 years. The second technological improvement option is the least attractive alternative of the group.

  18. The impact of cloud-based information technology in improving organizational performance in the banking industry

    Directory of Open Access Journals (Sweden)

    Seyedeh Maryam Seyed Khamesi

    2016-09-01

    Full Text Available Cloud computing is one of the most important changes in information technology last years. The decision to choose a cloud-oriented architecture for an organization is a significant issue. In fact, cloud computing is a new paradigm and has not obtained its maturity yet. With growing cloud computing, although a lot of great promises are along with it, there are a host of concerns and problems. In this regard, the purpose of conducting this study isevaluating the effect of cloud-based information technology for improving organizational performance in the banking industry;alsoit covers the gap in previous researches that have been impractical.In this research, with understanding the banking business areas, and identifying key performance indicators financial, customer, business process, growth and learning perspectives, based on the balanced score card, effectiveness and value-adding of cloud- orientation approach have been assessed in each ofits perspectives. The study population is consisted of two Iranian banks and three payment services providers. Data collection has been conducted through desk and field study,and its tool had been questionnaire. SPSS statistical software and appropriate statistical tests such as mode and median analysis, ratio or binomial test, and Friedman test have been used in order to analyze the data. Based on the results obtained from the research, cloud-based information technology by affecting the banking business areas improves organizational performance of banks in financial, internal processes and customer perspectives and in general improves organizational performance of banks using the weighted average of perspectives.

  19. Mechanical Coupling Error Suppression Technology for an Improved Decoupled Dual-Mass Micro-Gyroscope

    Directory of Open Access Journals (Sweden)

    Bo Yang

    2016-04-01

    Full Text Available This paper presents technology for the suppression of the mechanical coupling errors for an improved decoupled dual-mass micro-gyroscope (DDMG. The improved micro-gyroscope structure decreases the moment arm of the drive decoupled torque, which benefits the suppression of the non-ideal decoupled error. Quadrature correction electrodes are added to eliminate the residual quadrature error. The structure principle and the quadrature error suppression means of the DDMG are described in detail. ANSYS software is used to simulate the micro-gyroscope structure to verify the mechanical coupling error suppression effect. Compared with the former structure, simulation results demonstrate that the rotational displacements of the sense frame in the improved structure are substantially suppressed in the drive mode. The improved DDMG structure chip is fabricated by the deep dry silicon on glass (DDSOG process. The feedback control circuits with quadrature control loops are designed to suppress the residual mechanical coupling error. Finally, the system performance of the DDMG prototype is tested. Compared with the former DDMG, the quadrature error in the improved dual-mass micro-gyroscope is decreased 9.66-fold, and the offset error is decreased 6.36-fold. Compared with the open loop sense, the feedback control circuits with quadrature control loop decrease the bias drift by 20.59-fold and the scale factor non-linearity by 2.81-fold in the ±400°/s range.

  20. Mechanical Coupling Error Suppression Technology for an Improved Decoupled Dual-Mass Micro-Gyroscope.

    Science.gov (United States)

    Yang, Bo; Wang, Xingjun; Deng, Yunpeng; Hu, Di

    2016-01-01

    This paper presents technology for the suppression of the mechanical coupling errors for an improved decoupled dual-mass micro-gyroscope (DDMG). The improved micro-gyroscope structure decreases the moment arm of the drive decoupled torque, which benefits the suppression of the non-ideal decoupled error. Quadrature correction electrodes are added to eliminate the residual quadrature error. The structure principle and the quadrature error suppression means of the DDMG are described in detail. ANSYS software is used to simulate the micro-gyroscope structure to verify the mechanical coupling error suppression effect. Compared with the former structure, simulation results demonstrate that the rotational displacements of the sense frame in the improved structure are substantially suppressed in the drive mode. The improved DDMG structure chip is fabricated by the deep dry silicon on glass (DDSOG) process. The feedback control circuits with quadrature control loops are designed to suppress the residual mechanical coupling error. Finally, the system performance of the DDMG prototype is tested. Compared with the former DDMG, the quadrature error in the improved dual-mass micro-gyroscope is decreased 9.66-fold, and the offset error is decreased 6.36-fold. Compared with the open loop sense, the feedback control circuits with quadrature control loop decrease the bias drift by 20.59-fold and the scale factor non-linearity by 2.81-fold in the ±400°/s range.

  1. Improving patient outcomes with technology and social media in paediatric diabetes.

    Science.gov (United States)

    Ng, Sze May

    2015-01-01

    The UK has the highest number of children and young people with diagnosed Type 1 diabetes mellitus (T1DM) in Europe, but the lowest numbers attaining good diabetes control (1, 2). Novel strategies and incorporation of digital strategies were identified in the team for development to improve overall patient care and outcomes in our population of children and young people with T1DM. Within a dual-site integrated care organisation, 3 digital initiatives were proposed from 2012-2013 to 1) establish Facebook communications with parents/patients, 2) to implement an electronic diabetes information management system (using Twinkle.Net) and 3) to undertake routine uploading of blood glucose meters and insulin pumps (using DIASEND®) with the aim to improve outcomes in paediatric diabetes care. Key objectives for the three initiatives were aimed to optimise the following outcomes: • Reduce HbA1c levels • Decrease emergency admissions, reduce diabetes-related complications and minimise the length of hospital stays • Improve patient satisfaction and communication • Improve efficiencies with mandatory audit submissions • Empower patients, parents, and the multidisciplicnary team with accurate, real-time information. These digital initiatives showed effective use of technology and social media in achieving significant improvements in all the outcomes within the objectives.

  2. [Review of the 2016 Swiss immunization schedule and technology update for improving vaccine management].

    Science.gov (United States)

    Diana, Alessandro

    2016-05-11

    The 2016 immunization schedule published by the Swiss Federal Office of Public Health includes three new clauses: reimbursement of the additional Human Papillomavirus (HPV) vaccination in young males (11-26 years) as recommended by local canton programs, the end of franchise exemption for the measles, mumps and rubella (MMR) vaccination, and the creation of a new system of indemnities and moral compensation in the event of personal injury resulting from vaccinations. This article presents the main features of the 2016 immunization schedule with details of the technology available to physicians to improve vaccine management.

  3. Problems and criteria of quality improvement in end face mechanical seal rings through technological methods

    Science.gov (United States)

    Tarelnik, V.; Belous, A.; Antoszewski, B.; Zukov, A.

    2017-08-01

    In this paper are presented the recommendations for material’s selections of the mechanical seals rings and basic productive and operating requirements. The system of a directional selection of technology that ensures the required quality of working surfaces of the mechanical seals rings covers their entire life cycle. The mathematical frictional model is proposed as an instrument for calculating a linear and weighing abrasion of the mechanical seals rings and helps to improve selection’s criteria and the most rational method of strengthening.

  4. New technology markedly improves hand-hygiene performance among healthcare workers after restroom visits.

    Science.gov (United States)

    Møller-Sørensen, H; Korshin, A; Mogensen, T; Høiby, N

    2016-04-01

    The risks to patients from pathogens present on healthcare workers' (HCWs') hands are high; however, compliance with hand hygiene among HCWs is low. We devised a prospective intervention trial of a new hand-hygiene dispensing technology to improve HCWs' compliance with hand hygiene. Baseline hand-hygiene compliance was observed for three months before and after an intervention consisting of implementation of an electronic device that reminds people to comply with hand hygiene after restroom visits. Compliance in hand-hygiene performance after restroom visits increased among HCWs from 66% to 91% after the intervention.

  5. The electronic image stabilization technology research based on improved optical-flow motion vector estimation

    Science.gov (United States)

    Wang, Chao; Ji, Ming; Zhang, Ying; Jiang, Wentao; Lu, Xiaoyan; Wang, Jiaoying; Yang, Heng

    2016-01-01

    The electronic image stabilization technology based on improved optical-flow motion vector estimation technique can effectively improve the non normal shift, such as jitter, rotation and so on. Firstly, the ORB features are extracted from the image, a set of regions are built on these features; Secondly, the optical-flow vector is computed in the feature regions, in order to reduce the computational complexity, the multi resolution strategy of Pyramid is used to calculate the motion vector of the frame; Finally, qualitative and quantitative analysis of the effect of the algorithm is carried out. The results show that the proposed algorithm has better stability compared with image stabilization based on the traditional optical-flow motion vector estimation method.

  6. Changing Family Practices with Assistive Technology: MOBERO Improves Morning and Bedtime Routines for Children with ADHD

    DEFF Research Database (Denmark)

    Sonne, Tobias; Müller, Jörg; Marshall, Paul;

    ’ frustration levels. Additionally, use of MOBERO was associated with a 16.5% reduction in core ADHD symptoms and an 8.3% improvement in the child’s sleep habits, both measured by standardized questionnaires. Our study highlights the potential of assistive technologies to change the everyday practices......Families of children with Attention Deficit Hyperactivity Disorder (ADHD) often report morning and bedtime routines to be stressful and frustrating. Through a design process involving domain professionals and families we designed MOBERO, a smartphone-based system that assists families...... in establishing healthy morning and bedtime routines with the aim to assist the child in becoming independent and lowering the parents’ frustration levels. In a two-week intervention with 13 children with ADHD and their families, MOBERO significantly improved children’s independence and reduced parents...

  7. Advanced lightweight cooling-garment technology: functional improvements in thermosensitive patients with multiple sclerosis.

    Science.gov (United States)

    Meyer-Heim, A; Rothmaier, M; Weder, M; Kool, J; Schenk, P; Kesselring, J

    2007-03-01

    Cooling of thermosensitive patients with multiple sclerosis (MS) can improve clinical symptoms. In order to study the effectiveness of an advanced lightweight cooling-garment technology based on aquatic evaporation, a single-blinded balanced crossover study was performed on 20 patients with an Expanded Disability Status Scale score garment prototype for peripheral cooling suggest improvement of a timed-walking test, leg-strength, fine-motor skills and subjective benefits. Preliminary data of the heart rate variability (HRV) including six patients suggest that the MS patients show an abnormal HRV after sham condition, which is normalized after cooling. Technical information was gained about the cooling activity and the practicability and handling of the device. These encouraging findings promote further adaptations of the prototype to increase its cooling properties and ameliorate the practicability of the cooling garment.

  8. Using information technology for an improved pharmaceutical care delivery in developing countries. Study case: Benin.

    Science.gov (United States)

    Edoh, Thierry Oscar; Teege, Gunnar

    2011-10-01

    One of the problems in health care in developing countries is the bad accessibility of medicine in pharmacies for patients. Since this is mainly due to a lack of organization and information, it should be possible to improve the situation by introducing information and communication technology. However, for several reasons, standard solutions are not applicable here. In this paper, we describe a case study in Benin, a West African developing country. We identify the problem and the existing obstacles for applying standard ECommerce solutions. We develop an adapted system approach and describe a practical test which has shown that the approach has the potential of actually improving the pharmaceutical care delivery. Finally, we consider the security aspects of the system and propose an organizational solution for some specific security problems.

  9. Using technology and collaborative working for a positive patient experience and to improve safety.

    Science.gov (United States)

    Desai, Usha

    2016-09-01

    Clinicians who treat patients with wounds need access to the resources that will enable them to deliver the best and most appropriate treatments. A partnership working initiative between Greenwich CCG Medicines management (commissioner), Oxleas NHS Foundation Trust (provider) and ConvaTec (commercial partner) was set up to provide wound-care dressings and products to patients via the community services. It lead to improved access, greater patient benefits, a reduction in dressings waste, and an increase in clinical confidence to make cost-effective, evidence-based prescribing decisions. This inspired the commissioners to collaborate with BlueBay (technology partner) to 'trailblaze' the development and introduction of an electronic wound care template for practice nurses and doctors in primary care to use in conjunction with VISION and EMIS, clinical software systems used in GP practices. This interoperability of clinical systems to improve wound care is, to date, the only one of its kind in the UK.

  10. Study protocol: mobile improvement of self-management ability through rural technology (mI SMART).

    Science.gov (United States)

    Mallow, Jennifer A; Theeke, Laurie A; Long, Dustin M; Whetsel, Tara; Theeke, Elliott; Mallow, Brian K

    2015-01-01

    There are 62 million Americans currently residing in rural areas who are more likely to have multiple chronic conditions and be economically disadvantaged, and in poor health, receive less recommended preventive services and attend fewer visits to health care providers. Recent advances in mobile healthcare (mHealth) offer a promising new approach to solving health disparities and improving chronic illness care. It is now possible and affordable to transmit health information, including values from glucometers, automated blood pressure monitors, and scales, through Bluetooth-enabled devices. Additionally, audio and video communications technologies can allow healthcare providers to conduct many parts of a physical exam remotely from varied settings. These technologies could remove geographical distance as a barrier to care and diminish the access to care issues faced by patients who live rurally. However, currently there is lack of studies that provide evidence of feasibility, acceptability, and effectiveness of mHealth initiatives on improved outcomes of care, a needed step to make the translation to implementation studies in healthcare systems. The purpose of this paper is to present the protocol for the first study of mI SMART (mobile Improvement of Self-Management Ability through Rural Technology), a new integrated mHealth intervention. Our objective is to provide evidence of feasibility and acceptability for the use of mI SMART in an underserved population and establish evidence for the refinement of mI SMART. The proposed study will take place at Milan Puskar Health Right, a free primary care clinic in the state of West Virginia. The clinic provides health care at no cost to uninsured, low income; adults aged 18-64 living in West Virginia. We will enroll 30 participants into this feasibility study with plans of implementing a longitudinal randomized, comparative effectiveness design in the future. Data collection will include tracking of barriers and

  11. Measuring and improving patient safety through health information technology: The Health IT Safety Framework.

    Science.gov (United States)

    Singh, Hardeep; Sittig, Dean F

    2016-04-01

    Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety

  12. EUROPEAN PROJECTS AS A TOOL FOR IMPROVING FARMERS SKILLS VIA MODERN INFORMATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Zuzana PALKOVA

    2013-01-01

    Full Text Available This article presents European projects with the main focus on the improving the skills and competitiveness of farmers by modern information and communication technologies and e-learning methods. Two projects – AVARES - Enhance attractiveness of renewable energy training by virtual reality and NewCAP - New European Standards in the Context of Reformed EU Common Agricultural Policy are projects under the Leonardo da Vinci Transfer ofInnovation grant scheme. They try to present new way of vocational education and training in the agrosector. The main aim of the AVARES project is to develop the multimedia learning materials for vocational education and training in the field of agricultural and rural development and application of modern information and communication technologies into vocational education and training. The emphasis is put on the application of modern ICT equipment and technologies, with the main focus on the Virtual reality, 3D visual display and e - learning 2.0 methods. New programming period 2014 – 2020 will bring significant changes within the Common Agricultural Policy (CAP which will have a serious impact on economy especially of larger beneficiaries. The „NewCAP“ project aiming at preparation of actors in rural areas to take the proposed changes in the policy through interactive educational programme.

  13. Multiplexed lateral flow biosensors: Technological advances for radically improving point-of-care diagnoses.

    Science.gov (United States)

    Li, Jia; Macdonald, Joanne

    2016-09-15

    Lateral flow biosensors are a leading technology in point-of-care diagnostics due to their simplicity, rapidness and low cost. Their primacy in this arena continues through technological breakthroughs such as multiplexing: the detection of more than one biomarker in a single assay. Multiplexing capacity is critical for improving diagnostic efficiency, enhancing the diagnostic precision for specific diseases and reducing diagnostic cost. Here we review, for the first time, the various types and strategies employed for creating multiplexed lateral flow biosensors. These are classified into four main categories in terms of specific application or multiplexing level, namely linear, parameter, spatial and conceptual. We describe the practical applications and implications for each approach and compare their advantages and disadvantages. Importantly, multiplexing is still subject to limitations of the traditional lateral flow biosensor, such as sensitivity and specificity. However, by pushing the limitations of the traditional medium into the multiplex arena, several technological breakthroughs are emerging with novel solutions that further expand the utility of lateral flow biosensing for point-of-care applications.

  14. Neuroethical considerations: cognitive liberty and converging technologies for improving human cognition.

    Science.gov (United States)

    Sententia, Wrye

    2004-05-01

    Developers of NBIC (Nano-Bio-Info-Cogno) technologies face a multitude of obstacles, not the least of which is navigating the public ethics of their applied research. Biotechnologies have received widespread media attention and spawned heated interest in their perceived social implications. Now, in view of the rapidly expanding purview of neuroscience and the growing array of technologic developments capable of affecting or monitoring cognition, the emerging field of neuroethics calls for a consideration of the social and ethical implications of neuroscientific discoveries and trends. To negotiate the complex ethical issues at stake in new and emerging kinds of technologies for improving human cognition, we need to overcome political, disciplinary, and religious sectarianism. We need analytical models that protect values of personhood at the heart of a functional democracy-values that allow, as much as possible, for individual decision-making, despite transformations in our understanding and ability to manipulate cognitive processes. Addressing cognitive enhancement from the legal and ethical notion of "cognitive liberty" provides a powerful tool for assessing and encouraging NBIC developments.

  15. Under-sodium viewing technology for improvement of fast-reactor safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Beddingfield, David H [Los Alamos National Laboratory; Gerhart, Jeremy J [Los Alamos National Laboratory; Kawakubo, Yoko [JAEA

    2009-01-01

    The current safeguards approach for fast reactors relies exclusively on maintenance of continuity of knowledge to track the movement of fuel assemblies through these facilities. The remote handling of fuel assemblies, the visual opacity of the liquid metal coolant. and the chemical reactivity of sodium all combine and result in significant limitations on the available options to verify fuel assembly identification numbers or the integrity of these assemblies. These limitations also serve to frustrate attempts to restore the continuity-of-knowledge in instances where the information is under a variety of scenarios. The technology of ultrasonic under-sodium viewing offers new options to the safeguards community for recovering continuity-of-knowledge and applying more traditional item accountancy to fast reactor facilities. We have performed a literature review to investigate the development of under-sodium viewing technologies. In this paper we will summarize our findings and report the state of development of this technology and we will present possible applications to the fast reactor system to improve the existing safeguards approach at these reactors and in future fast reactors.

  16. Pedagogy and/or technology: Making difference in improving students' problem solving skills

    Science.gov (United States)

    Hrepic, Zdeslav; Lodder, Katherine; Shaw, Kimberly A.

    2013-01-01

    Pen input computers combined with interactive software may have substantial potential for promoting active instructional methodologies and for facilitating students' problem solving ability. An excellent example is a study in which introductory physics students improved retention, conceptual understanding and problem solving abilities when one of three weekly lectures was replaced with group problem solving sessions facilitated with Tablet PCs and DyKnow software [1,2]. The research goal of the present study was to isolate the effect of the methodology itself (using additional time to teach problem solving) from that of the involved technology. In Fall 2011 we compared the performance of students taking the same introductory physics lecture course while enrolled in two separate problem-solving sections. One section used pen-based computing to facilitate group problem solving while the other section used low-tech methods for one third of the semester (covering Kinematics), and then traded technologies for the middle third of the term (covering Dynamics). Analysis of quiz, exam and standardized pre-post test results indicated no significant difference in scores of the two groups. Combining this result with those of previous studies implies primacy of pedagogy (collaborative problem solving itself) over technology for student learning in problem solving recitations.

  17. Recent advances to improve fermentative butanol production: genetic engineering and fermentation technology.

    Science.gov (United States)

    Zheng, Jin; Tashiro, Yukihiro; Wang, Qunhui; Sonomoto, Kenji

    2015-01-01

    Butanol has recently attracted attention as an alternative biofuel because of its various advantages over other biofuels. Many researchers have focused on butanol fermentation with renewable and sustainable resources, especially lignocellulosic materials, which has provided significant progress in butanol fermentation. However, there are still some drawbacks in butanol fermentation in terms of low butanol concentration and productivity, high cost of feedstock and product inhibition, which makes butanol fermentation less competitive than the production of other biofuels. These hurdles are being resolved in several ways. Genetic engineering is now available for improving butanol yield and butanol ratio through overexpression, knock out/down, and insertion of genes encoding key enzymes in the metabolic pathway of butanol fermentation. In addition, there are also many strategies to improve fermentation technology, such as multi-stage continuous fermentation, continuous fermentation integrated with immobilization and cell recycling, and the inclusion of additional organic acids or electron carriers to change metabolic flux. This review focuses on the most recent advances in butanol fermentation especially from the perspectives of genetic engineering and fermentation technology.

  18. Self-emulsifying excipient platform for improving technological properties of alginate-hydroxypropylcellulose pellets.

    Science.gov (United States)

    Mannina, Paolo; Segale, Lorena; Giovannelli, Lorella; Bonda, Andrea Foglio; Pattarino, Franco

    2016-02-29

    In this work, alginate, alginate-pectin and alginate-hydroxypropylcellulose pellets were produced by ionotropic gelation and characterized. Ibuprofen was selected as model drug; it was suspended in the polymeric solution in crystalline form or dissolved in a self-emulsifying phase and then dispersed into the polymeric solution. The self-emulsifying excipient platform composed of Labrasol (PEG-8 caprylic/capric glycerides) and d-α-tocopherol polyethylene glycol 1000 succinate (TPGS), able to solubilize the drug was used to improve the technological and biopharmaceutical properties of the alginate pellets. The pellets had diameters between 1317 and 2026 μm and a high drug content (>51%). DSC analysis showed the amorphous state of drug in the pellets containing the self-emulsifying phase. All the systems restricted drug release in conditions simulating the gastric environment and made the drug completely available at a pH value typical for the intestine. Only alginate-HPC systems containing the drug solubilized into the self-emulsifying phase showed the ability to partially control the release of ibuprofen at neutral pH. The self-emulsifying excipient platform is a useful tool to improve technological and biopharmaceutical properties of alginate-HPC pellets.

  19. Improved Access to Scientific Data Through Technology, Standards, and Best Practices

    Science.gov (United States)

    Narock, T. W.; Arko, R. A.; Chandler, C. L.; Rozell, E. A.

    2013-12-01

    The increasing volume, complexity, and heterogeneity of scientific data are posing challenges to public access to data. These challenges also affect the assessment of impact and accountability. Yet, we are beginning to see that a confluence of standards and best practices can lead to improved accessibility and increased sustainability. We present examples of how Linked Open Data, standards, and best practices are being used to automate the linking of heterogeneous datasets as well as link data to publication. Specifically, we highlight our work in making data from the oceanographic community, the National Science Foundation, and professional societies, including the AGU and the Earth Science Information Partnership, more connected and more easily accessible and usable. We highlight the benefits of emerging semantic technologies, which enable automated reasoning and we show examples from the oceanographic research community. We discuss how technologies, standards, and best practices are leading to improvements in finding, accessing, and using data and publications. Finally, we demonstrate how these techniques and standards are being used to promote sustainable and scalable data repositories.

  20. Improving pest risk assessment and management through the aid of geospatial information technology standards

    Directory of Open Access Journals (Sweden)

    Trond Rafoss

    2013-09-01

    Full Text Available Delivery of geospatial information over the Internet for the management of risks from invasive alien species is an increasingly important service. The evolution of information technology standards for geospatial data is a key factor to simplify network publishing and exchange of maps and data. The World Wide Web Consortium (W3C-geolocation specification is a recent addition that may prove useful for pest risk management. In this article we implement the W3C-geolocation specification and Open Geospatial Consortium (OGC mapping standards in a Web browser application for smartphones and tablet computers to improve field surveys for alien invasive species. We report our first season field experiences using this tool for online mapping of plant disease outbreaks and host plant occurrence. It is expected that the improved field data collection tools will result in increased data availability and thereby new opportunities for risk assessment, because data-needs and availability are crucial for species distribution modelling and model-based forecasts of pest establishment potential. Finally, we close with a comment on the future potential of geospatial information standards to enhance the translation from data to decisions regarding pest risks, which should enable earlier detection of emerging risks as well as more robust projections of pest risks in novel areas. The forthcoming standard for processing of geospatial information, the Web Processing Standard (WPS, should open new technological capabilities both for automatic initiation and updating of risk assessment models based on new incoming data, and subsequent early warning.

  1. Efficiency improvements by Metal Wrap Through technology for n-type Si solar cells and modules

    Energy Technology Data Exchange (ETDEWEB)

    Wenchao, Zhao; Jianming, Wang; Yanlong, Shen; Ziqian, Wang; Yingle, Chen; Shuquan, Tian; Zhiliang, Wan; Bo, Yu; Gaofei, Li; Zhiyan, Hu; Jingfeng, Xiong [Yingli Green Energy Holding Co., Ltd, 3399 North Chaoyang Avenue, Baoding (China); Guillevin, N.; Heurtault, B.; Aken, B.B. van; Bennett, I.J.; Geerligs, L.J.; Weeber, A.W.; Bultman, J.H. [ECN Solar Energy, Petten (Netherlands)

    2012-09-15

    N-type Metal Wrap Through (n-MWT) is presented as an industrially promising back-contact technology to reach high performance of silicon solar cells and modules. It can combine benefits from both n-type base and MWT metallization. In this paper, the efficiency improvements of commercial industrial n-type bifacial Si solar cells (239 cm{sup 2}) and modules (60 cells) by the integration of the MWT technique are described. For the cell, after the optimization of integration, over 0.3% absolute efficiency gain was achieved over the similar non-MWT technology, and Voc gain and Isc gain up to 0.9% and 3.5%, respectively. These gains are mainly attributed to reduced shading loss and surface recombination. Besides the front pattern optimization, a 0.1m{Omega} reduction of Rs in via part will induce further 0.06% absolute efficiency improvement. For the module part, a power output of n-MWT module up to 279W was achieved, corresponding to a module efficiency of about 17.7%.

  2. Improved hand hygiene technique and compliance in healthcare workers using gaming technology.

    Science.gov (United States)

    Higgins, A; Hannan, M M

    2013-05-01

    In 2009, the World Health Organization recommended the use of a 'multi-faceted, multi-modal hand hygiene strategy' (Five Moments for Hand Hygiene) to improve hand hygiene compliance among healthcare workers. As part of this initiative, a training programme was implemented using an automated gaming technology training and audit tool to educate staff on hand hygiene technique in an acute healthcare setting. To determine whether using this automated training programme and audit tool as part of a multi-modal strategy would improve hand hygiene compliance and technique in an acute healthcare setting. A time-series quasi-experimental design was chosen to measure compliance with the Five Moments for Hand Hygiene and handwashing technique. The study was performed from November 2009 to April 2012. An adenosine triphosphate monitoring system was used to measure handwashing technique, and SureWash (Glanta Ltd, Dublin, Ireland), an automated auditing and training unit, was used to provide assistance with staff training and education. Hand hygiene technique and compliance improved significantly over the study period (P hand hygiene programme can encourage staff participation in learning, and ultimately improve hand hygiene compliance and technique in the acute healthcare setting. Copyright © 2013 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  3. Aligning health information technologies with effective service delivery models to improve chronic disease care

    Science.gov (United States)

    Bauer, Amy M.; Thielke, Stephen M.; Katon, Wayne; Unützer, Jürgen; Areán, Patricia

    2014-01-01

    Objective Healthcare reforms in the United States, including the Affordable Care and HITECH Acts, and the NCQA criteria for the Patient Centered Medical Home have promoted health information technology (HIT) and the integration of general medical and mental health services. These developments, which aim to improve chronic disease care have largely occurred in parallel, with little attention to the need for coordination. In this article, the fundamental connections between HIT and improvements in chronic disease management are explored. We use the evidence-based collaborative care model as an example, with attention to health literacy improvement for supporting patient engagement in care. Method A review of the literature was conducted to identify how HIT and collaborative care, an evidence-based model of chronic disease care, support each other. Results Five key principles of effective collaborative care are outlined: care is patient-centered, evidence-based, measurement-based, population-based, and accountable. The potential role of HIT in implementing each principle is discussed. Key features of the mobile health paradigm are described, including how they can extend evidence-based treatment beyond traditional clinical settings. Conclusion HIT, and particularly mobile health, can enhance collaborative care interventions, and thus improve the health of individuals and populations when deployed in integrated delivery systems. PMID:24963895

  4. Prevalence of tick infestation in dromedary camels (Camelus dromedarius) brought for slaughter in Mashhad abattoir, Iran.

    Science.gov (United States)

    Moshaverinia, Ali; Moghaddas, Elham

    2015-09-01

    This study was carried out to investigate the prevalence of tick infestation and identify tick species that parasitize dromedary camels. Since April 2012 through March 2013, a total of 400 camels that brought for slaughter in Mashhad abattoir were examined for tick infestation. Out of the total 400 camels examined, 237 were infested and annual prevalence of tick infestation 59.25 % (95 % CI 54-64) was calculated. The higher prevalence rates were found in the summer and spring, especially the summer that prevalence rate was the highest. A total of 1,122 ticks were collected from the infested camels and identified by stereomicroscopy. Hyalomma dromedarii was the predominant tick species and comprised 70.76 % of the collected ticks. The frequency of other species was as follows: H. excavatum (19.25 %), H. anatolicum (4.81 %), H. asiaticum (4.72 %), Rhipicephalus turanicus (0.17 %), H. detritum (0.09 %), H. impeltatum (0.09 %) and H. schulzei (0.09 %). Based on the results of present study, it is concluded that camels mostly harbor Hyalomma spp. The species of this genus are the most notorious ticks for transmission of human and animal diseases. Therefore, appropriate tick control measures need to be employed and pour-on method for acaricide application is suggested because this method is fast, easy and suitable for use by camel owners in deserts.

  5. SPHERE's 'Dress Sense' a Multi-disciplinary approach to designing wearable technology to improve health

    Directory of Open Access Journals (Sweden)

    Amelia Martin

    2015-10-01

    Full Text Available Background Healthcare systems face financial challenges, with a greater number of the population living longer with long term conditions. In order to deliver safe, high quality care within these constraints, we must place more emphasis on preventing illness than treating illness. We can use the science of behaviour change, health, and technology to create solutions to these problems. An example of innovation in this field include SPHERE’s multidisciplinary project entitled ‘Dress Sense’, with the aim to create a piece of wearable technology to improve health. Description This competition was run by SPHERE (Sensor Platform for HEalthcare in a Residential Environment which focuses on developing sensor systems to monitor health and wellbeing in the home. The teams comprised of computer scientists, medical professionals, students and school children, engineers, fashion designers and textile artists. They were provided with a kit including Arduino software, sensors and other items to make wearable computers. There were no constraints on what they could produce, except for a deadline of 3 weeks. The end project was judged according to the innovation and usefulness of the overall concept; the functionality, usability and desirability (aesthetics of the constructed device and the multi-displinary component. The idea was to foster open innovation in order to share ideas between specialities. Conclusions Ideas included tackling diabetic medical adherence through a wearable band to sensors woven into socks to prevent deep vein thrombosis. The winning concept was, ‘Yo’ a support system to aid cognitive behaviour therapy, through wearable products and accessories, to help those who begin CBT, stay motivated to engage effectively with therapy. This project highlighs how through multi-disciplinary collaboration and including the younger generation, innovative effective ideas can be found to harness digital technology to improve health.

  6. Interactions of technology and society: Impacts of improved airtransport. A study of airports at the grass roots. [in rural communities

    Science.gov (United States)

    Laporte, T.; Rosenthal, S.; Ross, S.; Lee, K. N.; Levine, E.

    1977-01-01

    The feasibility of applying a particular conception of technology and social change to specific examples of technological development was investigated. The social and economic effects of improved airport capabilities on rural communities were examined. Factors which led to the successful implementation of a plan to construct sixty small airports in Ohio are explored and implications derived for forming public policies, evaluating air transportation development, and assessing technology.

  7. THE IMPROVEMENT OF TECHNOLOGY PRODUCTION OF BITUMEN FOR THE ROAD PAVING

    Directory of Open Access Journals (Sweden)

    N. A. Belova

    2016-01-01

    Full Text Available Aim. The oil (artificial bitumens, got by conversion of the oil cheese, are broadly used in the road construction. The track record of the development road covering, studies, bound with improvement their characteristic and development of the competitions among technology is presented in this article.Methods. Nowdays the modern developments in the field of production bitumen road marks are implemented using such technological-go acceptance as chemical actuated heavy oil cheese, which principles are based on regulation of the energybetween molecular interactions and optimization their dimensionality, allowing raise quality bitumen.Results. Adjusting the depth of recovery of the oxidized product, it is possible to obtain different composition, plasticity and heat resistance of the bitumen. The residual bitumen obtained by two-stage oxidation with subsequent vacuum distillation of the oxidized product comply with GOST 60/90. Vacuum gas oil in the production of residual bitumen corresponds to the motor fuel for marine installations.Conclusion. Today, the bitumen production leaves on positions packed-valuable segment oil processing industry. The Main customer roads - a state. Herewith important role as ideologues of the development of the culture road construction plays the Federal road agency, supporting developing competition amongst leading technology. Introduction new technology at conversion remaining component oils, founded on do active cheese to account physical and chemical of the influence, with using the modern equipment, including equipment, using subject to influence effects, ultrasonic and electro-magnetic fields, and others, allows to get the qualitative road bitumens from majority of the oils, scanned earlier unfit for production bitumen.

  8. Sport and health-improving technologies as a mean of kinesiotherapy in the educational field of university

    Directory of Open Access Journals (Sweden)

    Gorelov A.A

    2012-11-01

    Full Text Available To consider the scientific approach to development of structure, maintenance and orientation athletic-health-improvement technologies as it applies to educational space of modern higher institute and everyday activity of student young people. Logic of development is certain to any of athletic-health-improvement technologies. The single chart of description of structure and maintenance is presented to each athletic-health-improvement technologies. Series are developed new athletic-health-improvement technologies of increase of stability of organism of students to the different unfavorable factors, prophylaxis of overweight, violations in a state of the cardiorespiratory system and locomotorium. Formulated suggestion on achievement of optimum indicators and indexes for to the use their educational process of modern institute of higher.

  9. International space station accomplishments update: Scientific discovery, advancing future exploration, and benefits brought home to earth

    Science.gov (United States)

    Thumm, Tracy; Robinson, Julie A.; Alleyne, Camille; Hasbrook, Pete; Mayo, Susan; Buckley, Nicole; Johnson-Green, Perry; Karabadzhak, George; Kamigaichi, Shigeki; Umemura, Sayaka; Sorokin, Igor V.; Zell, Martin; Istasse, Eric; Sabbagh, Jean; Pignataro, Salvatore

    2014-10-01

    Throughout the history of the International Space Station (ISS), crews on board have conducted a variety of scientific research and educational activities. Well into the second year of full utilization of the ISS laboratory, the trend of scientific accomplishments and educational opportunities continues to grow. More than 1500 investigations have been conducted on the ISS since the first module launched in 1998, with over 700 scientific publications. The ISS provides a unique environment for research, international collaboration and educational activities that benefit humankind. This paper will provide an up to date summary of key investigations, facilities, publications, and benefits from ISS research that have developed over the past year. Discoveries in human physiology and nutrition have enabled astronauts to return from ISS with little bone loss, even as scientists seek to better understand the new puzzle of “ocular syndrome” affecting the vision of up to half of astronauts. The geneLAB campaign will unify life sciences investigations to seek genomic, proteomic and metabolomics of the effect of microgravity on life as a whole. Combustion scientists identified a new “cold flame” phenomenon that has the potential to improve models of efficient combustion back on Earth. A significant number of instruments in Earth remote sensing and astrophysics are providing new access to data or nearing completion for launch, making ISS a significant platform for understanding of the Earth system and the universe. In addition to multidisciplinary research, the ISS partnership conducts a myriad of student led research investigations and educational activities aimed at increasing student interest in science, technology, engineering and mathematics (STEM). Over the past year, the ISS partnership compiled new statistics of the educational impact of the ISS on students around the world. More than 43 million students, from kindergarten to graduate school, with more than 28

  10. Improve information retrieval and e-learning using mobile agent based on semantic web technology

    Directory of Open Access Journals (Sweden)

    Maged Elazony

    2015-07-01

    Full Text Available The Web-based education and E-Learning has become a very important branch of new educational technology. E-learning and Web-based courses offer advantages for learners by making access to resources and learning objects very fast, just-in-time and relevance, at any time or place. Web based Learning Management Systems should focus on how to satisfy the e-learners needs and it may advise a learner with most suitable resources and learning objects. But Because of many limitations using web 2.0 for creating E-learning management system, now-a-days we use Web 3.0 which is known as Semantic web. It is a platform to represent E-learning management system that recovers the limitations of Web 2.0.In this paper we present “improve information retrieval and e-learning using mobile agent based on semantic web technology”. This paper focuses on design and implementation of knowledge-based industrial reusable, interactive, web-based training activities at the sea ports and logistics sector and use e-learning system and semantic web to deliver the learning objects to learners in an interactive, adaptive and flexible manner. We use semantic web and mobile agent to improve Library and courses Search. The architecture presented in this paper is considered an adaptation model that converts from syntactic search to semantic search. We apply the training at Damietta port in Egypt as a real-world case study. we present one of possible applications of mobile agent technology based on semantic web to management of Web Services, this model improve the information retrieval and E-learning system.

  11. Application of Technology on Improving Beef Cattle Productivity in East Nusa Tenggara

    Directory of Open Access Journals (Sweden)

    Wirdahayati R B

    2010-03-01

    Full Text Available The Province of East Nusa Tenggara (NTT had been one of the major beef cattle suppliers under traditional management system in Indonesia. The beef cattle farming that based on grazing native pasture and the introduction of shrub legumes (Leucaena leucocephala may contribute to around 15 – 50% of the farmers’ household income. In the last few years, supply of beef cattle tended to decline due to the decrease in cattle population in NTT. Some basic improvements in management and feeding toward increasing beef cattle productivities had been carried out in Nusa Tenggara, such as a baseline survey on Cattle Health and Productivity Survey (CHAPS conducted in 1990 – 1992. The objective of the program was to identify the existing beef cattle productivity and health condition throughout Nusa Tenggara. A collaborative research with the Ministry of Research and Technology (Integrated Prime Research had also been carried out and the result showed that early weaning in Bali calves that can be practised as early as 3 – 6 months to prevent calves losses during the dry season. A program of the Assessment on Beef Cattle Base Farming Activities had also been conducted to improve fattening and breeding practices through the improvement in beef cattle management and feeding systems. At the latest development, fattening scheme has been introduced under a partnership approach involving private sectors and cooperatives. This needs to be facilitated by the government to accelerate the program such as access to capital and intensive extension services to build farmers awareness toward profit oriented beef cattle farming. Optimalization of the available potential resources and technology in NTT, will be an opportunity to enhance beef cattle production and gains back the reputation as one of the major producing beef cattle in the past. This will also support the national livestock program nowadays, called Beef Cattle Self Sufficiency Program 2014.

  12. Huawei Introduces Advanced relecom Technology to Uzbekistan

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    SINCE entering Uzbekistan in 1999, Huawei has grown into the country's biggest supplier of telecommunications equipment. Not only has Huawei introduced 3G technology to Uzbekistan, in cooperation with a local tele- tom operator, it has also deployed the eountry's first LTE (Long Term Evo- lution) network. After moving its Central Asian headquarters to Uzbekistan, Huawei expanded its business and brought advanced telecom technology to the host coun- try, which has improved Uzbekistan's overall technological level and local economic development.

  13. Improving technology universal vegetable semi-finished products for the enterprises of food industry

    Directory of Open Access Journals (Sweden)

    M. N. Kutkina

    2016-01-01

    Full Text Available Healthy nutrition is one of the main factors that becomes stronger the human immune system, especially in the big cities, forms intellectual abilities of people, increases the qualitative characteristics of living standards etc. The most important components of a healthy nutrition are vegetables and products from them. Rather high moisture content of many vegetables, e.g., fruit, partially fills the needs of the human organism in water, lowers the energy value of the diet, enhances the motility of the gastrointestinal tract. In this regard, the improvement of technology universal product from regional vegetables available has got importance, prolonged pronounced social effect and contributes to health improvement. Among vegetables the zucchini include diet properties, but the use of them is accompanied by certain difficulties associated with seasonal logistics and the limited range of products from them. In this work, there were studied the varietal characteristics of the zucchini, zoned in the North-West region, in terms of their technological properties, morphological characteristics and biochemical composition of fruit during ripening. Were investigated the optimal ways of canning zucchini by drying with freeze-drying and infrared heating that allows you to provide catering universal semi-finished product during the whole year, not only in areas of cultivation, but also in areas outside of growing vegetables. There was discovered the effect of anomalous dehydration of fruit vegetables in the result of the study , which helped to explain the increased, in comparison with other types of vegetables, losses during heat treatment and to justify their methods and technological parameters of drying. It was found that one of the reasons for the reduction of mechanical strength parenchymal tissue of fruit vegetables, is the destruction of cell walls by increasing the pressure inside the air inclusions, in contrast to some other types of fruit

  14. Biosecurity and yield improvement technologies are strategic complements in the fight against food insecurity.

    Directory of Open Access Journals (Sweden)

    David C Cook

    Full Text Available The delivery of food security via continued crop yield improvement alone is not an effective food security strategy, and must be supported by pre- and post-border biosecurity policies to guard against perverse outcomes. In the wake of the green revolution, yield gains have been in steady decline, while post-harvest crop losses have increased as a result of insufficiently resourced and uncoordinated efforts to control spoilage throughout global transport and storage networks. This paper focuses on the role that biosecurity is set to play in future food security by preventing both pre- and post-harvest losses, thereby protecting crop yield. We model biosecurity as a food security technology that may complement conventional yield improvement policies if the gains in global farm profits are sufficient to offset the costs of implementation and maintenance. Using phytosanitary measures that slow global spread of the Ug99 strain of wheat stem rust as an example of pre-border biosecurity risk mitigation and combining it with post-border surveillance and invasive alien species control efforts, we estimate global farm profitability may be improved by over US$4.5 billion per annum.

  15. Improved Tubulars for Better Economics in Deep Gas Well Drilling using Microwave Technology

    Energy Technology Data Exchange (ETDEWEB)

    Dinesh Agrawal; Paul Gigl; Mark Hunt; Mahlon Dennis

    2007-07-31

    The main objective of the entire research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Based on the results of the Phase I and insurmountable difficulties faced in the extrusion and de-waxing processes, the approach of achieving the goals of the program was slightly changed in the Phase II in which an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joining (by induction or microwave) has been adopted. This process can be developed into a semicontinuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. The main objective of the Phase II research program is to demonstrate the potential to economically manufacture microwave processed coiled tubing with improved performance for extended useful life under hostile coiled tubing drilling conditions. After the completion of the Phase II, it is concluded that scale up and sintering of a thin wall common O.D. size tubing that is widely used in the market is still to be proved and further experimentation and refinement of the sintering process is needed in Phase III. Actual manufacturing capability of microwave sintered, industrial quality, full length tubing will most likely require several million dollars of investment.

  16. Improved Tubulars for Better Economics in Deep Gas Well Drilling Using Microwave Technology

    Energy Technology Data Exchange (ETDEWEB)

    Dinesh Agrawal

    2006-09-30

    The main objective of the entire research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Based on the results of the Phase I and insurmountable difficulties faced in the extrusion and de-waxing processes, the approach of achieving the goals of the program was slightly changed in the Phase II in which an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joining (by induction or microwave) has been adopted. This process can be developed into a semicontinuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. The main objective of the Phase II research program is to demonstrate the potential to economically manufacture microwave processed coiled tubing with improved performance for extended useful life under hostile coiled tubing drilling conditions. After the completion of the Phase II, it is concluded that scale up and sintering of a thin wall common O.D. size tubing that is widely used in the market is still to be proved and further experimentation and refinement of the sintering process is needed in Phase III. Actual manufacturing capability of microwave sintered, industrial quality, full length tubing will most likely require several million dollars of investment.

  17. Defining core issues in utilizing information technology to improve access: evaluation and research agenda.

    Science.gov (United States)

    Jackson, George L; Krein, Sarah L; Alverson, Dale C; Darkins, Adam W; Gunnar, William; Harada, Nancy D; Helfrich, Christian D; Houston, Thomas K; Klobucar, Thomas F; Nazi, Kim M; Poropatich, Ronald K; Ralston, James D; Bosworth, Hayden B

    2011-11-01

    The Department of Veterans Affairs (VA) has been at the vanguard of information technology (IT) and use of comprehensive electronic health records. Despite the widespread use of health IT in the VA, there are still a variety of key questions that need to be answered in order to maximize the utility of IT to improve patient access to quality services. This paper summarizes the potential of IT to enhance healthcare access, key gaps in current evidence linking IT and access, and methodologic challenges for related research. We also highlight four key issues to be addressed when implementing and evaluating the impact of IT interventions on improving access to quality care: 1) Understanding broader needs/perceptions of the Veteran population and their caregivers regarding use of IT to access healthcare services and related information. 2) Understanding individual provider/clinician needs/perceptions regarding use of IT for patient access to healthcare. 3) System/Organizational issues within the VA and other organizations related to the use of IT to improve access. 4) IT integration and information flow with non-VA entities. While the VA is used as an example, the issues are salient for healthcare systems that are beginning to take advantage of IT solutions.

  18. KenVACS: Improving Vaccination of Children through Cellular Network Technology in Developing Countries

    Directory of Open Access Journals (Sweden)

    George Gatuha

    2015-04-01

    Full Text Available Health Data collection is one of the major components of public health systems. Decision makers, policy makers, and medical service providers need accurate and timely data in order to improve the quality of health services. The rapid growth and use of mobile technologies has exerted pressure on the demand for mobile-based data collection solutions to bridge the information gaps in the health sector. We propose a prototype using open source data collection frameworks to test its feasibility in improving the vaccination data collection in Kenya. KenVACS, the proposed prototype, offers ways of collecting vaccination data through mobile phones and visualizes the collected data in a web application; the system also sends reminder short messages service (SMS to remind parents on the date of the next vaccination. Early evaluation demonstrates the benefits of such a system in supporting and improving vaccination of children. Finally, we conducted a qualitative study to assess challenges in remote health data collection and evaluated usability and functionality of KenVACS.

  19. Using Vision System Technologies to Enable Operational Improvements for Low Visibility Approach and Landing Operations

    Science.gov (United States)

    Kramer, Lynda J.; Ellis, Kyle K. E.; Bailey, Randall E.; Williams, Steven P.; Severance, Kurt; Le Vie, Lisa R.; Comstock, James R.

    2014-01-01

    Flight deck-based vision systems, such as Synthetic and Enhanced Vision System (SEVS) technologies, have the potential to provide additional margins of safety for aircrew performance and enable the implementation of operational improvements for low visibility surface, arrival, and departure operations in the terminal environment with equivalent efficiency to visual operations. To achieve this potential, research is required for effective technology development and implementation based upon human factors design and regulatory guidance. This research supports the introduction and use of Synthetic Vision Systems and Enhanced Flight Vision Systems (SVS/EFVS) as advanced cockpit vision technologies in Next Generation Air Transportation System (NextGen) operations. Twelve air transport-rated crews participated in a motion-base simulation experiment to evaluate the use of SVS/EFVS in NextGen low visibility approach and landing operations. Three monochromatic, collimated head-up display (HUD) concepts (conventional HUD, SVS HUD, and EFVS HUD) and two color head-down primary flight display (PFD) concepts (conventional PFD, SVS PFD) were evaluated in a simulated NextGen Chicago O'Hare terminal environment. Additionally, the instrument approach type (no offset, 3 degree offset, 15 degree offset) was experimentally varied to test the efficacy of the HUD concepts for offset approach operations. The data showed that touchdown landing performance were excellent regardless of SEVS concept or type of offset instrument approach being flown. Subjective assessments of mental workload and situation awareness indicated that making offset approaches in low visibility conditions with an EFVS HUD or SVS HUD may be feasible.

  20. New Material Development for Surface Layer and Surface Technology in Tribology Science to Improve Energy Efficiency

    Science.gov (United States)

    Ismail, R.; Tauviqirrahman, M.; Jamari, Jamari; Schipper, D. J.

    2009-09-01

    This paper reviews the development of new material and surface technology in tribology and its contribution to energy efficiency. Two examples of the economic benefits, resulted from the optimum tribology in the transportation sector and the manufacturing industry are discussed. The new materials are proposed to modify the surface property by laminating the bulk material with thin layer/coating. Under a suitable condition, the thin layer on a surface can provide a combination of good wear, a low friction and corrosion resistance for the mechanical components. The innovation in layer technology results molybdenum disulfide (MoS2), diamond like carbon (DLC), cubic boron nitride (CBN) and diamond which perform satisfactory outcome. The application of the metallic coatings to carbon fibre reinforced polymer matrix composites (CFRP) has the capacity to provide considerable weight and power savings for many engineering components. The green material for lubricant and additives such as the use of sunflower oil which possesses good oxidation resistance and the use of mallee leaves as bio-degradable solvent are used to answer the demand of the environmentally friendly material with good performance. The tribology research implementation for energy efficiency also touches the simple things around us such as: erasing the laser-print in a paper with different abrasion techniques. For the technology in the engineering surface, the consideration for generating the suitable surface of the components in running-in period has been discussed in order to prolong the components life and reduce the machine downtime. The conclusion, tribology can result in reducing manufacturing time, reducing the maintenance requirements, prolonging the service interval, improving durability, reliability and mechanical components life, and reducing harmful exhaust emission and waste. All of these advantages will increase the energy efficiency and the economic benefits.

  1. Improvement of MEAs for direct-methanol fuel cells by tuned layer preparation and coating technology

    Energy Technology Data Exchange (ETDEWEB)

    Lindermeir, A.; Rosenthal, G.; Kunz, U.; Hoffmann, U. [Institute for Chemical Process Engineering, Technical University of Clausthal, Leibnizstrasse 17, D-38678 Clausthal-Zellerfeld (Germany)

    2004-04-01

    Large scale production of membrane electrode assemblies (MEAs) for fuel cells requires a fabrication technology, which is not only based on electrochemical phenomena but also takes into account aspects of materials processing and conversion. For the fabrication of MEAs for DMFC a production sequence consisting of wet ball-milling, wet spray coating and calendering was developed at the ICVT Clausthal. This has a proven ability for the preparation of diffusion backings and catalyst layers with high reproducibility. To improve MEA performance, investigations concerning the influence of layer fabrication and composition are made with respect to the resulting morphology of the structures. Intermediates and MEAs are evaluated by conductivity measurements, determination of permeability values and current density-voltage characteristics supported by SEM and optical microscopy. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  2. Improved Approach for Utilization of FPGA Technology into DAQ, DSP, and Computing Applications

    Energy Technology Data Exchange (ETDEWEB)

    Isenhower, Larry Donald

    2009-01-28

    Innovation Partners proposed and successfully demonstrated in this SBIR Phase I grant a software/hardware co-design approach to reduce both the difficulty and time to implement Field Programmable Gate Array (FPGA) solutions to data acquisition and specialized computational applications. FPGAs can require excessive time for programming and require specialized knowledge that will be greatly reduced by the company's solution. Not only are FPGAs ideal for DAQ and embedded solutions, they can also be the best solution to specialized signal processing to replace Digital Signal Processors (DSPs). By allowing FPGA programming to be done in C with the equivalent of a simple compilation, algorithm changes and improvements can be implemented decreasing the life-cycle costs and allow subsitution of new FPGA designs staying above the technological details.

  3. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Melting Efficiency Improvement

    Energy Technology Data Exchange (ETDEWEB)

    Principal Investigator Kent Peaslee; Co-PI’s: Von Richards, Jeffrey Smith

    2012-07-31

    Steel foundries melt recycled scrap in electric furnaces and typically consume 35-100% excess energy from the theoretical energy requirement required to pour metal castings. This excess melting energy is multiplied by yield losses during casting and finishing operations resulting in the embodied energy in a cast product typically being three to six times the theoretical energy requirement. The purpose of this research project was to study steel foundry melting operations to understand energy use and requirements for casting operations, define variations in energy consumption, determine technologies and practices that are successful in reducing melting energy and develop new melting techniques and tools to improve the energy efficiency of melting in steel foundry operations.

  4. Development of process technologies for improvement of electroless nickel coatings properties

    Science.gov (United States)

    Barba-Pingarrón, A.; Bolarín-Miró, A.; Sánchez – de Jesús, F.; Vargas-Mendoza, L.; Trujillo-Barragán, M.; Molera-Sola, P.; Hernandez-Gallegos, M. A.; Valdez-Navarro, R.

    2013-06-01

    This paper describes research and technology developments that enable to improve nickel electroless coating properties. This work deals with: (a) different methods in order to achieve Ni-P-Mo coatings. (b) Other development is related with coatings with addition of hard particles such as SiC, WC or Al2O3,(c) Electroless nickel deposits on PBT and austempered ductile iron (ADI). (d) In addition, nickel coatings were deposited on powder metallic pieces and finally, electroless nickel coatings, in conjunction with layers from thermal spray process were formed. Characterization of all coatings by means of optical microscopy, scanning electron microscopy, micro-hardness, wear and corrosion tests were carried out. Results indicate positive increment in both mechanical and electrochemical properties which enhance field applications in Mexican industry.

  5. DEVELOPMENT OF METHODS IMPROVING INDUSTRIAL SAFETY OF TECHNOLOGICAL PROCESSES IN ASPHALT-CONCRETE PLANT MIXERS

    Directory of Open Access Journals (Sweden)

    I. A. Ivanova

    2010-05-01

    Full Text Available Problem statement. The problem of improvement of industrial safety of technol-ogical processes in mixers of asphalt-concrete plants is considered on the basis of analysis of organic impurities content in incomplete combustion products, and es-timation of efficiency of purification of asphalt-concrete plant emissions in the presence of “wet” flue gas purification system is given.Results and conclusions. It has been found that the efficiency of hydrocarbon fuel burning affects the amount of hydrophobic dust thrown into the atmosphere, and burning of heavy fuel oil is attended by significant incompleteness of fuel combustion, and this is connected with the processes of fuel dispersion and evapo-ration. The optimal measures for efficient combustion and cleaning of hydrophob-ic dust are described.

  6. Improving oligonucleotide fingerprinting of rRNA genes by implementation of polony microarray technology

    Science.gov (United States)

    Ruegger, Paul M.; Bent, Elizabeth; Li, Wei; Jeske, Daniel R.; Cui, Xinping; Braun, Jonathan; Jiang, Tao; Borneman, James

    2012-01-01

    Improvements to oligonucleotide fingerprinting of rRNA genes (OFRG) were obtained by implementing polony microarray technology. OFRG is an array-based method for analyzing microbial community composition. Polonies are discrete clusters of DNA, produced by solid-phase PCR in hydrogels, and derived from individual, spatially isolated DNA molecules. The advantages of a polony-based OFRG method include higher throughput and reductions in the PCR-induced errors and compositional skew inherent in all other PCR-based community composition methods, including high throughput sequencing of rRNA genes. Given the similarities between polony microarrays and certain aspects of sequencing methods such as the Illumina platform, we suggest that if concepts presented in this study were implemented in high throughput sequencing protocols, a reduction of PCR-induced errors and compositional skew may be realized. PMID:22640891

  7. Present and future applications of DNA technologies to improve beef production.

    Science.gov (United States)

    Allan, M F; Smith, T P L

    2008-09-01

    Substantial improvements in production efficiency and quality of beef and dairy products have been made possible through manipulation of bovine genetics. The advent of modern breeds in the last two centuries, the institution of phenotypic selection practices and quantitative genetics, even the process of domestication in the distant past, have all represented means to make use of naturally occurring variation in the genome to tailor the animal for a desired outcome. We discuss the history of genome research in cattle and recent technological advances that promise a leap forward in the use of DNA sequence to facilitate selection, in which a detailed genome-level view for individual animals may provide comprehensive and relatively accurate assessment of the consequences, both desired and unintended, of genetic selection for livestock production.

  8. Review on Improving Wear and Corrosion Resistance of Steels via Plasma Electrolytic Saturation Technology

    Science.gov (United States)

    Lin, Naiming; Xie, Ruizhen; Zhou, Peng; Zou, Jiaojuan; Ma, Yong; Wang, Zhenxia; Han, Pengju; Wang, Zhihua; Tang, Bin; Tian, Wei

    2016-03-01

    Plasma electrolytic saturation (PES) technique which holds the advantages of short treating time and limited heating influence and immediate quenching effect is conducted under high voltage power supply in some electrolyte has been extensively applied to enhance the surface performance of metallic materials. Steel is widely used in various fields thanks to its promising merits of easy workability, plasticity, toughness and weldability. It accounts for a large proportion in the application scope of the metal materials. Steel surfaces with good corrosion resistance, promising wear resistance and high hardness would be obtained by PES. Meanwhile, uniformed coatings can be formed without special requirements for substrate geometries using the PES. This paper first presents a brief introduction of the technological principle of PES. The status on studies and applications of PES for improving surface performance of steels has been reviewed.

  9. Improving sustainability by technology assessment and systems analysis: the case of IWRM Indonesia

    Science.gov (United States)

    Nayono, S.; Lehmann, A.; Kopfmüller, J.; Lehn, H.

    2016-09-01

    To support the implementation of the IWRM-Indonesia process in a water scarce and sanitation poor region of Central Java (Indonesia), sustainability assessments of several technology options of water supply and sanitation were carried out based on the conceptual framework of the integrative sustainability concept of the German Helmholtz association. In the case of water supply, the assessment was based on the life-cycle analysis and life-cycle-costing approach. In the sanitation sector, the focus was set on developing an analytical tool to improve planning procedures in the area of investigation, which can be applied in general to developing and newly emerging countries. Because sanitation systems in particular can be regarded as socio-technical systems, their permanent operability is closely related to cultural or religious preferences which influence acceptability. Therefore, the design of the tool and the assessment of sanitation technologies took into account the views of relevant stakeholders. The key results of the analyses are presented in this article.

  10. Improving epidemiologic surveillance and health promoter training in rural Latin America through information and communication technologies.

    Science.gov (United States)

    Martínez, Andrés; López, Diego M; Sáez, Alberto; Seoane, Joaquín; Rendón, Alvaro; Shoemaker, Richard; Fernández, Ignacio

    2005-08-01

    This paper presents two technological developments oriented to increase the efficiency of the epidemiologic surveillance system and to improve the diagnostic and therapeutic capabilities of the rural establishments with only e-mail connectivity through wireless systems. The Telematics Department of the University of Cauca has developed a computerized epidemiologic surveillance system for the collecting, sending, processing, visualization, and feedback of epidemiologic information at national level. The use of the system in a pilot area has solved the problems of subregister, increasing the volume of data collection in 15%. The complete epidemiologic system is currently being implemented in 22 health care establishments in the Department of Cauca in Colombia. Likewise, the Technical University and Carlos III University of Madrid have developed a distance training system with a high-usability interface both for students and teachers. The system includes authoring, distribution, tracking, and visualization of courses synchronized through electronic mail messages in a clear way for the user. Both systems use a creative combination of e-mail and XML (eXtensible Markup Language)-based technologies, ready to be used through slow, intermittent, and asynchronous communication systems.

  11. Poverty Alleviation and Environmental Sustainability through Improved Regimes of Technology Transfer

    Directory of Open Access Journals (Sweden)

    Klaus Bosselmann

    2006-06-01

    Full Text Available To achieve the Millennium Development Goals, international technology transfer can play a major role for poverty alleviation and environmental sustainability. At present, there are economic, social and legal (rather than technical barriers preventing the transfer of environmentally sound technology (EST from a wider use in international regimes. Removing these barriers requires greater political and regulatory efforts both domestically and internationally. To enable EST transfer, developed States need to improve domestic market conditions such as removal of negative subsidies and barriers to foreign investment, targeted fiscal incentives and law reforms favouring sustainable production and use of energy. There is no realistic perspective for international EST transfer as long as it is disadvantaged domestically. A coherent EST transfer regime is only possible through greater governmental intervention at the national and international level, including environmental regulations, national systems of innovation, and creating an enabling environment for EST. Such intervention should include effective public-private partnerships, both within and between States. Partnerships, if guided by law, could ensure EST innovation more efficiently than purely State-driven or market-driven EST transfers. In search for a model, the EST transfer regime under the Vienna Ozone Layer Convention and the Montreal Protocol deserves recognition. For example, the clean development mechanism under the Kyoto Protocol allows for considerable scope for EST transfer. The potential of EST transfer for climate change and for meeting the Millennium Development Goals has yet to be realized.

  12. Using Technology to Improve Cancer Care: Social Media, Wearables, and Electronic Health Records.

    Science.gov (United States)

    Fisch, Michael J; Chung, Arlene E; Accordino, Melissa K

    2016-01-01

    Digital engagement has become pervasive in the delivery of cancer care. Internet- and cellular phone-based tools and systems are allowing large groups of people to engage with each other and share information. Health systems and individual health professionals are adapting to this revolution in consumer and patient behavior by developing ways to incorporate the benefits of technology for the purpose of improving the quality of medical care. One example is the use of social media platforms by oncologists to foster interaction with each other and to participate with the lay public in dialogue about science, medicine, and cancer care. In addition, consumer devices and sensors (wearables) have provided a new, growing dimension of digital engagement and another layer of patient-generated health data to foster better care and research. Finally, electronic health records have become the new standard for oncology care delivery, bringing new opportunities to measure quality in real time and follow practice patterns, as well as new challenges as providers and patients seek ways to integrate this technology along with other forms of digital engagement to produce more satisfaction in the process of care along with measurably better outcomes.

  13. Enhancing Lay Counselor Capacity to Improve Patient Outcomes with Multimedia Technology.

    Science.gov (United States)

    Robbins, Reuben N; Mellins, Claude A; Leu, Cheng-Shiun; Rowe, Jessica; Warne, Patricia; Abrams, Elaine J; Witte, Susan; Stein, Dan J; Remien, Robert H

    2015-06-01

    Multimedia technologies offer powerful tools to increase capacity of health workers to deliver standardized, effective, and engaging antiretroviral medication adherence counseling. Masivukeni-is an innovative multimedia-based, computer-driven, lay counselor-delivered intervention designed to help people living with HIV in resource-limited settings achieve optimal adherence. This pilot study examined medication adherence and key psychosocial outcomes among 55 non-adherent South African HIV+ patients, on antiretroviral therapy (ART) for at least 6 months, who were randomized to receive either Masivukeni or standard of care (SOC) counseling for ART non-adherence. At baseline, there were no significant differences between the SOC and Masivukeni groups on any outcome variables. At post-intervention (approximately 5-6 weeks after baseline), -clinic-based pill count adherence data available for 20 participants (10 per intervention arm) showed a 10 % improvement for-participants and a decrease of 8 % for SOC participants. Masivukeni participants reported significantly more positive attitudes towards disclosure and medication social support, less social rejection, and better clinic-patient relationships than did SOC participants. Masivukeni shows promise to promote optimal adherence and provides preliminary evidence that multimedia, computer-based technology can help lay counselors offer better adherence counseling than standard approaches.

  14. Field experience and improvements with thin tubular-plate lead/acid technology

    Energy Technology Data Exchange (ETDEWEB)

    Merz, K.D. [CMP Batteries, Bolton (United Kingdom)

    1998-05-18

    The Classic 25 is the product name for a motive-power lead/acid cell using thin positive tubular plates. This cell was developed for use in electric vehicles and other applications where high specific energy and reliable cycle life is required. It would appear that the best approach is to provide a lead/acid battery that has the highest specific energy while still maintaining excellent cycle life. This technology was implemented by use of 6 V modules, followed by a 2-V design. Since this was first introduced in 1989, more than 20 000 cells and monoblocs have been delivered to various electric vehicle applications such as vans, trucks, and buses. The field experience with this product is therefore excellent, and development is continuing on the battery design and manufacturing techniques to improve performance and life even further. Today, a wide range of products using this technology is available, and the latest developments are a new 6 V monobloc and some maintenance-free cells. (orig.)

  15. Improvement on the Fatigue Performance of 2024-T4 Alloy by Synergistic Coating Technology

    Directory of Open Access Journals (Sweden)

    Xi-Shu Wang

    2014-05-01

    Full Text Available In this paper, rotating bending fatigue tests of 2024-T4 Al alloy with different oxide coatings were carried out. Compared to the uncoated and previously reported oxide coatings of aluminum alloys, the fatigue strength is able to be enhanced by using a novel oxide coating with sealing pore technology. These results indicate that the better the coating surface quality is, the more excellent the fatigue performance under rotating bending fatigue loading is. The improvement on the fatigue performance is mainly because the fatigue crack initiation and the early stage of fatigue crack growth at the coating layer can be delayed after PEO coating with pore sealing. Therefore, it is a so-called synergistic coating technology for various uses, including welding thermal cracks and filling micro-pores. The effects of different oxide coatings on surface hardness, compressive residual stress, morphology and fatigue fracture morphology are discussed. A critical compressive residual stress of about 95–100 MPa is proposed.

  16. Can new technologies improve upper limb performance in grown-up diplegic children?

    Science.gov (United States)

    Turconi, Anna C; Biffi, Emilia; Maghini, Cristina; Peri, Elisabetta; Servodio Iammarone, Fernanda; Gagliardi, Chiara

    2016-10-01

    Few systematic studies describe rehabilitation trainings for upper limb in diplegic children with cerebral palsy (CP), who - especially once grown up - are often not considered as a target for rehabilitation interventions. In this pilot study, we describe the details and the effectiveness of an intensive, technology assisted intervention for upper limb. The treatment combines the utilization of Armeo® Spring with a training focused on hand/finger fluency and dexterity in a pre-post treatment experimental design. Participants were ten school-aged children (mean age 11.2) with bilateral CP and diplegia, attending mainstream schools. Participants underwent 40 therapy sessions in four weeks. Armeo® Spring measures, standardized motor and perceptual outcome indexes, as well as everyday life indicators were utilized to assess the effect of the intervention. Upper limb coordination, fluency and quality of movements mainly of hands and fingers significantly improved, with a good transferability to everyday life also in areas not specifically trained, such as self-care abilities and mobility. Probably due to the visual feedback provided by the virtual reality setting (which was all in one the context, the incentive and the product of activities), perceptual abilities significantly improved, too. Our study suggests the importance of intervention on upper limb even in milder CP diplegic forms and in relatively grown-up children. The possibility of modification at least partially relies on learning processes that are active all along development and benefit from stimulation. Though further studies with control groups and follow-up perspective are needed to confirm, new technologies offer interesting possibilities to be integrated into new evidence-based rehabilitation models.

  17. Improvements to TAO Ocean Observations as a Result of Refresh Technology

    Science.gov (United States)

    Grissom, K.; Petraitis, D. C.; Pounder, D.

    2016-02-01

    The Tropical Atmosphere Ocean (TAO) array has been a major observational component of El Nino Southern Oscillation (ENSO) and climate prediction research since its completion in 1994 by NOAA's Pacific Marine Environmental Laboratory (PMEL). In 2005 operational responsibility and control of the TAO array was transitioned from PMEL to the National Data Buoy Center (NDBC). As part of the transition, a project for TAO Technology Refresh was developed to address equipment obsolescence and the need for higher data throughput in real-time. Completed in 2014, the "TAO Refresh" array has met the requirements of the NOAA transition plan and added new capabilities and value. These new capabilities include a reduced latency of data and increased real-time resolution from one observation per sensor each day to 144+ observations per sensor each day. Also, improvements in NDBC data management practices resulted in the development of a new TAO Automated Statistical Quality-control (TASQ) system that provides a real-time automated quality-control method based upon 20 years of historical data. In addition, an active method for gathering actionable evidence and combating vandalism was achieved through the installation of cameras on TAO buoys. With these enhanced capabilities, the TAO Refresh array is better positioned to support timely analyses of the diurnal cycle and high frequency weather phenomena that affect climate. An added benefit of the Refresh technology is the reduced sampling error due to the temporal averaging. For example, during a recent week long vandalism event at a Refresh buoy we have found an average error of 0.24°C (±0.17) in the subsurface temperature daily average, with the maximum error of 0.67°C. Historically, due to the limitations of real-time communications, these errors were masked within the daily average. However, with today's satellite system we can retrieve the full-resolution time series in real-time and improve the quality of our data.

  18. Integrating the NAS Milestones and handheld technology to improve residency training and assessment.

    Science.gov (United States)

    Cooney, Carisa M; Redett, Richard J; Dorafshar, Amir H; Zarrabi, Bahar; Lifchez, Scott D

    2014-01-01

    To incorporate the use of an intuitive and robust assessment tool in conjunction with the Next Accreditation System Milestones to maximize opportunities for trainee performance feedback and continuous trainee assessment, with the long-term goal of increasing the rate of performance improvement and mastery of knowledge and surgical skills. Pilot study. Johns Hopkins Medicine, Baltimore, MD. Primary, tertiary, and quaternary clinical care; institutional environment. Experimental group: two randomly selected postgraduate year-1 integrated training program residents per year for 2 consecutive years from the Department of Plastic and Reconstructive Surgery. traditionally trained residents from the integrated training program in the Department of Plastic and Reconstructive Surgery. Study duration: 7 years (until residents complete residency training). This assessment strategy would create large amounts of informative data on trainees, which can be cross-referenced to determine trainee progress. Assessment data would be collected continuously from all faculty surgeons. Comparisons of faculty and resident self-assessments would facilitate resident evaluations. Ease of use of the data collection structure would improve faculty evaluation compliance and timely resident case report completion. Improving the efficiency and efficacy of competency documentation is critical. Using portable technologies is an intuitive way to improve the trainee assessment process. We anticipate that this 2-pronged approach to trainee assessments would quickly provide large amounts of informative data to better assess trainee progress and inform Milestone assessments in a manner that facilitates immediate feedback. Assessments of faculty and resident satisfaction would help us further refine the assessment process as needed. If successful, this format could easily be implemented by other training programs. Innovations in Surgical Education: Milestones. © 2013 Published by Association of Program

  19. Improvement of methodical approaches to higher schools' marketing activity assessment on the basis of Internet technologies application

    Directory of Open Access Journals (Sweden)

    Elizaveta E. Tarasova

    2014-06-01

    Full Text Available The paper substantiates the necessity of higher schools marketing activity developing on the basis of Internet technologies; suggests the technique of comprehensive assessment of functioning and quality of the site as the main tool of marketing activity on the Internet, substantiates the stages of its implementation and provides the approbation results; suggests strategic directions for the improvement of functioning and quality improvement of a higher school site, which makes it possible to improve the efficiency of their marketing activity on the basis of the Internet technologies application.

  20. The promise of multimedia technology for STI/HIV prevention: frameworks for understanding improved facilitator delivery and participant learning.

    Science.gov (United States)

    Khan, Maria R; Epperson, Matthew W; Gilbert, Louisa; Goddard, Dawn; Hunt, Timothy; Sarfo, Bright; El-Bassel, Nabila

    2012-10-01

    There is increasing excitement about multimedia sexually transmitted infection (STI) and HIV prevention interventions, yet there has been limited discussion of how use of multimedia technology may improve STI/HIV prevention efforts. The purpose of this paper is to describe the mechanisms through which multimedia technology may work to improve the delivery and uptake of intervention material. We present conceptual frameworks describing how multimedia technology may improve intervention delivery by increasing standardization and fidelity to the intervention material and the participant's ability to learn by improving attention, cognition, emotional engagement, skills-building, and uptake of sensitive material about sexual and drug risks. In addition, we describe how the non-multimedia behavioral STI/HIV prevention intervention, Project WORTH, was adapted into a multimedia format for women involved in the criminal justice system and provide examples of how multimedia activities can more effectively target key mediators of behavioral change in this intervention.

  1. Development of an Improved Process for Installation Projects of High Technology Manufacturing Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Quintana, Sarah V. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-04-30

    High technology manufacturing equipment is utilized at Los Alamos National Laboratory (LANL) to support nuclear missions. This is undertaken from concept initiation where equipment is designed and then taken through several review phases, working closely with system engineers (SEs) responsible for each of the affected systems or involved disciplines (from gasses to HVAC to structural, etc.). After the design is finalized it moves to procurement and custom fabrication of the equipment and equipment installation, including all of the paperwork involved. Not only are the engineering and manufacturing aspects important, but also the scheduling, financial forecasting, and planning portions that take place initially and are sometimes modified as the project progresses should requirements, changes or additions become necessary. The process required to complete a project of this type, including equipment installation, is unique and involves numerous steps to complete. These processes can be improved and recent work on the Direct Current Arc (DC Arc) Glovebox Design, Fabrication and Installation Project provides an opportunity to identify some important lessons learned (LL) that can be implemented in the future for continued project improvement and success.

  2. Molecular technologies to improve the effectiveness of the sterile insect technique.

    Science.gov (United States)

    Franz, Gerald; Robinson, Alan S

    2011-01-01

    The application of the Sterile Insect Technique (SIT) in area-wide integrated pest management (AW-IPM) programmes continues to increase. However, programme efficiency can still be considerably enhanced when certain components of the technology are improved, such as the development of improved strains for mass rearing and release. These include strains that (1) produce only male insects for sterilization and release and (2) carry easily identifiable markers to identify released sterile insects in the field. Using both classical and modern biotechnology techniques, key insect pests are targeted, where SIT programmes are being implemented. The pests include mosquitoes, the Mexican fruit fly, the codling moth, the oriental fruit fly and the pink bollworm. This special issue summarizes the results of research efforts aimed at the development and evaluation of new strains to a level where a decision can be made as to their suitability for use in large scale SIT programmes. Major beneficiaries will be operational AW-IPM programmes that apply the SIT against major insect pests.

  3. Information Technologies in Public Health Management: A Database on Biocides to Improve Quality of Life

    Directory of Open Access Journals (Sweden)

    A Grigoriu

    2012-05-01

    Full Text Available Background: Biocides for prolonging the shelf life of a large variety of materials have been extensively used over the last decades. It has estimated that the worldwide biocide consumption to be about 12.4 billion dollars in 2011, and is expected to increase in 2012. As biocides are substances we get in contact with in our everyday lives, access to this type of information is of paramount importance in order to ensure an appropriate living environment. Consequently, a database where information may be quickly processed, sorted, and easily accessed, according to different search criteria, is the most desirable solution. The main aim of this work was to design and implement a relational database with complete information about biocides used in public health management to improve the quality of life.Methods: Design and implementation of a relational database for biocides, by using the software "phpMyAdmin".Results: A database, which allows for an efficient collection, storage, and management of information including chemical properties and applications of a large quantity of biocides, as well as its adequate dissemination into the public health environment.Conclusion: The information contained in the database herein presented promotes an adequate use of biocides, by means of information technologies, which in consequence may help achieve important improvement in our quality of life.

  4. Some drastic improvements found in the analysis of routing protocol for the Bluetooth technology using scatternet

    CERN Document Server

    Perwej, Yusuf; Jaleel, Uruj; Saxena, Sharad

    2012-01-01

    Bluetooth is a promising wireless technology that enables portable devices to form short-range wireless ad hoc networks. Unlike wireless LAN, the communication of Bluetooth devices follow a strict master slave relationship, that is, it is not possible for a slave device to directly communicate with another slave device even though they are within the radio coverage of each other. For inter piconet communication, a scatternet has to be formed, in which some Bluetooth devices have to act as bridge nodes between piconets. The Scatternet formed have following properties in which they are connected i.e every Bluetooth device can be reached from every other device, Piconet size is limited to eight nodes [1]. The author of this research paper have studied different type of routing protocol and have made efforts to improve throughput and reduce packet loss due to failure in the routing loop and increased mobility and improve the cohesive network structure, resolve the change topology conflicts [2], and a successful &...

  5. Development of Pangasius steaks by improved sous-vide technology and its process optimization.

    Science.gov (United States)

    Kumari, Namita; Singh, Chongtham Baru; Kumar, Raushan; Martin Xavier, K A; Lekshmi, Manjusha; Venkateshwarlu, Gudipati; Balange, Amjad K

    2016-11-01

    The present study embarked on the objective of optimizing improved sous-vide processing condition for development of ready-to-cook Pangasius steaks with extended shelf-life using response surface methodology. For the development of improved sous-vide cooked product, Pangasius steaks were treated with additional hurdles in various combinations for optimization. Based on the study, suitable combination of chitosan and spices was selected which enhanced antimicrobial and oxidative stability of the product. The Box-Behnken experimental design with 15 trials per model was adopted for designing the experiment to know the effect of independent variables, namely chitosan concentration (X1), cooking time (X2) and cooking temperature (X3) on dependent variable i.e. TBARS value (Y1). From RSM generated model, the optimum condition for sous-vide processing of Pangasius steaks were 1.08% chitosan concentration, 70.93 °C of cooking temperature and 16.48 min for cooking time and predicted minimum value of multiple response optimal condition was Y = 0.855 mg MDA/Kg of fish. The high correlation coefficient (R(2) = 0.975) between the model and the experimental data showed that the model was able to efficiently predict processing condition for development of sous-vide processed Pangasius steaks. This research may help the processing industries and Pangasius fish farmer as it provides an alternative low cost technology for the proper utilization of Pangasius.

  6. Improvements of task performance in daily life after acquired brain injury using commonly available everyday technology.

    Science.gov (United States)

    Lindén, Anita; Lexell, Jan; Larsson Lund, Maria

    2011-01-01

    To investigate how individualised occupation-based interventions with commonly available everyday technology (ET) can compensate for perceived difficulties with daily life tasks after an aquired brain injury (ABI) and improve satisfaction with occupational performance. This intervention study was designed as a multiple case study according to Yin. Ten men and women with an ABI (traumatic or non-traumatic) participated. Data were collected through interviews, observations and field notes before and after the intervention and at follow-up (on average 11 weeks afterwards). The interventions focused on enabling each participant's prioritised goals related to task performance in daily life. All participants achieved all their goals by learning to use both new functions in their own familiar ET and new ET. The participant's perceived difficulties in occupational performance decreased and their satisfaction with occupational performance increased with the use of ET. An individualised intervention process, involving the use of own familiar ET or ET off-the-shelf, has the potential to compensate for perceived difficulties following an ABI and improve satisfaction with occupational performance in daily life.

  7. TASTE MASKING TECHNOLOGIES: A NOVEL APPROACH FOR THE IMPROVEMENT OF ORGANOLEPTIC PROPERTY OF PHARMACEUTICAL ACTIVE SUBSTANCE

    Directory of Open Access Journals (Sweden)

    Sharma Deepak

    2012-04-01

    Full Text Available Acceptability of any dosage form are mainly depends over its taste i.e. mouth feel. Drug molecule interacts with taste receptor on the tongue to give bitter, sweet or salty taste sensation, when they dissolve in saliva. This sensation of the taste is the result of signal transduction from the receptor organs for taste, commonly known as taste buds. In market, there are numbers of pharmaceutical preparations available in which actives are bitter in taste. The improved palatability in these products has prompted the development of numerous formulations, which improved performance and acceptability. The bitterness of preparation also leads to patient incompliance. So masking of bitterness becomes essential. To overcome this problem, many techniques have been developed to mask the bitter taste of drugs. These techniques are not only mask the bitter taste of drug but also enhance the bioavailability and performance of drug dosage form. It includes adding sugars, flavors, sweeteners, use of lipoproteins, numbing taste buds, granulation, use of adsorbates ,coating drug, microencapsulation, multiple emulsion, viscosity modifier, vesicles and liposomes, prodrug and salt formation, inclusion and molecular complexes, solid dispersion and Ion Exchange Resins (IERs which have been tried by the formulators to mask the unpleasant taste of the bitter drugs. The present review article highlights different technologies of taste masking with respect to dosage form and novel methods of evaluation of taste masking effect.

  8. Designing a performance appraisal system based on balanced scorecard for improving productivity: Case study in Semnan technology and science park

    Directory of Open Access Journals (Sweden)

    Mohammad Hemati

    2012-08-01

    Full Text Available Today, organizations for holding and improving their competing merit use performance measurement for evaluation, control, supervision and improvement of their trading processes. Medium and small companies in technology and science parks are very useful in economic revivification and technology development. Technology and science parks have provided necessary consultations, information, suitable equipments, and services for developing technology unites and prepare them for independent presence in industry. One of the necessary elements for the success and improvement of performance in these companies is to establish and implement balanced scorecard, which can be used to reach desired goals, strategies and to improve performance. In this article, we use a structured method for calculating efficiency of four perspectives of balanced scorecard. Statistical society of this research was Semnan technology and Science Park and seven experts are selected for answering questions of the survey. We also complete questionnaire and determine index and relative importance of all indices. For developing strategic goals of Semnan technology and science park according to four perspectives of balanced score card (finance, growth and learning, internal process, six meetings were hold and finally all crisis macro goals index were identified and they were analyzed for evaluating performance.

  9. Using modern plant breeding to improve the nutritional and technological qualities of oil crops

    Directory of Open Access Journals (Sweden)

    Murphy Denis J.

    2014-11-01

    Full Text Available The last few decades have seen huge advances in our understanding of plant biology and in the development of new technologies for the manipulation of crop plants. The application of relatively straightforward breeding and selection methods made possible the “Green Revolution” of the 1960s and 1970s that effectively doubled or trebled cereal production in much of the world and averted mass famine in Asia. During the 2000s, much attention has been focused on genomic approaches to plant breeding with the deployment of a new generation of technologies, such as marker-assisted selection, next-generation sequencing, transgenesis (genetic engineering or GM and automatic mutagenesis/selection (TILLING, TargetIng Local Lesions IN Genomes. These methods are now being applied to a wide range of crops and have particularly good potential for oil crop improvement in terms of both overall food and non-food yield and nutritional and technical quality of the oils. Key targets include increasing overall oil yield and stability on a per seed or per fruit basis and very high oleic acid content in seed and fruit oils for both premium edible and oleochemical applications. Other more specialised targets include oils enriched in nutritionally desirable “fish oil”-like fatty acids, especially very long chain !-3 acids such as eicosapentaenoic acid (EPA and docosahexaenoic acid (DHA, or increased levels of lipidic vitamins such as carotenoids, tocopherols and tocotrienes. Progress in producing such oils in commercial crops has been good in recent years with several varieties being released or at advanced stages of development.

  10. Improvements in SISCOM II technology; Introduccion de Mejoras Tecnologicas en el SISCOM II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This document is the Final Report for the project Introduccion de Mejoras Tecnologicas en el SISCOM II, or Improvements in SISCOM II Technology. It consists of a brief description of the activities carried out during the project, and several Annexes that explain in a deeper way each result. SISCOM II is the main telemetry system currently in use in the Spanish underground coal mining, but it was developed ten years ago and needed a technological update, which was the objective of this project. The aims of the project were: To develop Hardware and Software for the Out stations currently used (maintenance developments) To design new hardware and software, easier to use in the current and new applications of SISCOM II Both objectives were met, although not in the way originally intended. The main results were: In the field of old Out stations update: A new set of boards for the old Out stations was developed Out station's firmware was updated for the new hardware In the field new hardware and software design: SISCOM II Supervision software was completely rewritten, and now runs under Windows 3.11/Windows 95 (Originally it ran under DOS) A new hardware configuration (the RELIA 2000), easier to assembly, install and reconfigured, together with its firmware, was developed Generally speaking the activities were carried out accordingly to the original schedule, with one exception, due to changes in the market of this type of Systems. Because of the changes, which happened by the end of the project's time span, the structure of the new hardware was somehow different to the original design, although its functionality and performance is similar or even better than those of the original one.

  11. Improvements in SISCOM II Technology; Introduccion de Mejoras Tecnologicas en el SISCOM II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This document is the Final Report for the project. Improvements in SISCOM II Technology. It consists of a brief description of the activities carried out during the project, and several Annexes that explain in a deeper way each result. SISCOM II is the main telemetry system currently in use in the Spanish underground coal mining, but it was developed ten years ago and needed a technological update, which was the objective of this project. The aims of the project were: - To develop Hardware and Software for the Outstations currently used (maintenance developments) - To design new hardware and software, easier to use in the current and new applications of SISCOM II Both objectives were met, although not in the way originally intended. The main results were: In the field of old Outstations update: - A new set of boards for the old Outstations was developed - Outstations`s firmware was updated for the new hardware In the field new hardware and software design: - SISCOM II Supervision software was completely rewritten, and now runs under Windows 3.11/Windows 95 (Originally it ran under DOS) - A new hardware configuration (the RELIA 2000), easier to assembly, install and re configure, together with its firmware, was developed Generally speaking the activities were carried out accordingly to the original schedule, with one exception, due to changes in the market of this type of Systems. Because of the changes, which happened by the end of the project`s time span, the structure of the new hardware was somehow different to the original design, although its functionality and performance is similar or even better than those of the original one. (Author)

  12. Information Technology Service Management with Cloud Computing Approach to Improve Administration System and Online Learning Performance

    Directory of Open Access Journals (Sweden)

    Wilianto Wilianto

    2015-10-01

    Full Text Available This work discusses the development of information technology service management using cloud computing approach to improve the performance of administration system and online learning at STMIK IBBI Medan, Indonesia. The network topology is modeled and simulated for system administration and online learning. The same network topology is developed in cloud computing using Amazon AWS architecture. The model is designed and modeled using Riverbed Academic Edition Modeler to obtain values of the parameters: delay, load, CPU utilization, and throughput. The simu- lation results are the following. For network topology 1, without cloud computing, the average delay is 54  ms, load 110 000 bits/s, CPU utilization 1.1%, and throughput 440  bits/s.  With  cloud  computing,  the  average  delay  is 45 ms,  load  2 800  bits/s,  CPU  utilization  0.03%,  and throughput 540 bits/s. For network topology 2, without cloud computing, the average delay is 39  ms, load 3 500 bits/s, CPU utilization 0.02%, and throughput database server 1 400 bits/s. With cloud computing, the average delay is 26 ms, load 5 400 bits/s, CPU utilization email server 0.0001%, FTP server 0.001%, HTTP server 0.0002%, throughput email server 85 bits/s, FTP    server 100 bits/sec, and HTTP server 95  bits/s.  Thus,  the  delay, the load, and the CPU utilization decrease; but,  the throughput increases. Information technology service management with cloud computing approach has better performance.

  13. Eye/head tracking technology to improve HCI with iPad applications.

    Science.gov (United States)

    Lopez-Basterretxea, Asier; Mendez-Zorrilla, Amaia; Garcia-Zapirain, Begoña

    2015-01-22

    In order to improve human computer interaction (HCI) for people with special needs, this paper presents an alternative form of interaction, which uses the iPad's front camera and eye/head tracking technology. With this functional nature/capability operating in the background, the user can control already developed or new applications for the iPad by moving their eyes and/or head. There are many techniques, which are currently used to detect facial features, such as eyes or even the face itself. Open source bookstores exist for such purpose, such as OpenCV, which enable very reliable and accurate detection algorithms to be applied, such as Haar Cascade using very high-level programming. All processing is undertaken in real time, and it is therefore important to pay close attention to the use of limited resources (processing capacity) of devices, such as the iPad. The system was validated in tests involving 22 users of different ages and characteristics (people with dark and light-colored eyes and with/without glasses). These tests are performed to assess user/device interaction and to ascertain whether it works properly. The system obtained an accuracy of between 60% and 100% in the three test exercises taken into consideration. The results showed that the Haar Cascade had a significant effect by detecting faces in 100% of cases, unlike eyes and the pupil where interference (light and shade) evidenced less effectiveness. In addition to ascertaining the effectiveness of the system via these exercises, the demo application has also helped to show that user constraints need not affect the enjoyment and use of a particular type of technology. In short, the results obtained are encouraging and these systems may continue to be developed if extended and updated in the future.

  14. Eye/Head Tracking Technology to Improve HCI with iPad Applications

    Directory of Open Access Journals (Sweden)

    Asier Lopez-Basterretxea

    2015-01-01

    Full Text Available In order to improve human computer interaction (HCI for people with special needs, this paper presents an alternative form of interaction, which uses the iPad’s front camera and eye/head tracking technology. With this functional nature/capability operating in the background, the user can control already developed or new applications for the iPad by moving their eyes and/or head. There are many techniques, which are currently used to detect facial features, such as eyes or even the face itself. Open source bookstores exist for such purpose, such as OpenCV, which enable very reliable and accurate detection algorithms to be applied, such as Haar Cascade using very high-level programming. All processing is undertaken in real time, and it is therefore important to pay close attention to the use of limited resources (processing capacity of devices, such as the iPad. The system was validated in tests involving 22 users of different ages and characteristics (people with dark and light-colored eyes and with/without glasses. These tests are performed to assess user/device interaction and to ascertain whether it works properly. The system obtained an accuracy of between 60% and 100% in the three test exercises taken into consideration. The results showed that the Haar Cascade had a significant effect by detecting faces in 100% of cases, unlike eyes and the pupil where interference (light and shade evidenced less effectiveness. In addition to ascertaining the effectiveness of the system via these exercises, the demo application has also helped to show that user constraints need not affect the enjoyment and use of a particular type of technology. In short, the results obtained are encouraging and these systems may continue to be developed if extended and updated in the future.

  15. Improving Maryland's Offshore Wind Energy Resource Estimate Using Doppler Wind Lidar Technology to Assess Microtmeteorology Controls

    Science.gov (United States)

    St. Pé, Alexandra; Wesloh, Daniel; Antoszewski, Graham; Daham, Farrah; Goudarzi, Navid; Rabenhorst, Scott; Delgado, Ruben

    2016-06-01

    There is enormous potential to harness the kinetic energy of offshore wind and produce power. However significant uncertainties are introduced in the offshore wind resource assessment process, due in part to limited observational networks and a poor understanding of the marine atmosphere's complexity. Given the cubic relationship between a turbine's power output and wind speed, a relatively small error in the wind speed estimate translates to a significant error in expected power production. The University of Maryland Baltimore County (UMBC) collected in-situ measurements offshore, within Maryland's Wind Energy Area (WEA) from July-August 2013. This research demonstrates the ability of Doppler wind lidar technology to reduce uncertainty in estimating an offshore wind resource, compared to traditional resource assessment techniques, by providing a more accurate representation of the wind profile and associated hub-height wind speed variability. The second objective of this research is to elucidate the impact of offshore micrometeorology controls (stability, wind shear, turbulence) on a turbine's ability to produce power. Compared to lidar measurements, power law extrapolation estimates and operational National Weather Service models underestimated hub-height wind speeds in the WEA. In addition, lidar observations suggest the frequent development of a low-level wind maximum (LLWM), with high turbinelayer wind shear and low turbulence intensity within a turbine's rotor layer (40m-160m). Results elucidate the advantages of using Doppler wind lidar technology to improve offshore wind resource estimates and its ability to monitor under-sampled offshore meteorological controls impact on a potential turbine's ability to produce power.

  16. Knowledge and technology transfer to improve the municipal solid waste management system of Durango City, Mexico.

    Science.gov (United States)

    Valencia-Vázquez, Roberto; Pérez-López, Maria E; Vicencio-de-la-Rosa, María G; Martínez-Prado, María A; Rubio-Hernández, Rubén

    2014-09-01

    As society evolves its welfare level increases, and as a consequence the amount of municipal solid waste increases, imposing great challenges to municipal authorities. In developed countries, municipalities have established integrated management schemes to handle, treat, and dispose of municipal solid waste in an economical and environmentally sound manner. Municipalities of developing and transition countries are not exempted from the challenges involving municipal solid waste handling, but their task is not easy to accomplish since they face budget deficits, lack of knowledge, and deficiencies in infrastructure and equipment. In the northern territory of Mexico, the municipality of Durango is facing the challenge of increased volumes of waste with a lack of adequate facilities and infrastructure. This article analyses the evolution of the municipal solid waste management of Durango city, which includes actions such as proper facilities construction, equipment acquisition, and the implementation of social programmes. The World Bank, offering courses to municipal managers on landfill operation and waste management, promoted the process of knowledge and technology transfer. Thereafter, municipal authorities attended regional and some international workshops on waste management. In addition they followed suggestions of international contractors and equipment dealers with the intention to improve the situation of the waste management of the city. After a 15-year period, transfer of knowledge and technology resulted in a modern municipal solid waste management system in Durango municipality. The actual system did not reach the standard levels of an integrated waste management system, nevertheless, a functional evaluation shows clear indications that municipality actions have put them on the right pathway.

  17. Soil ecology and agricultural technology; An integrated approach towards improved soil management for sustainable farming

    Science.gov (United States)

    Pulleman, Mirjam; Pérès, Guénola; Crittenden, Stephen; Heddadj, Djilali; Sukkel, Wijnand

    2014-05-01

    Intensive arable food production systems are in need of smart solutions that combine ecological knowledge and farm technology to maximize yields while protecting natural resources. The huge diversity of soil organisms and their interactions is of crucial importance for soil functions and ecosystem services, such as organic matter incorporation and break down, nutrient mineralization, soil structure formation, water regulation and disease and pest control. Soil management decisions that take into account the soil biodiversity and associated functions are thus essential to (i) maintain soil productivity in the long term, (ii) reduce the dependency on external inputs and non-renewables such as fossil fuels, and (iii) make agroecosystems more resilient against biotic and abiotic stresses. Organic farming systems and reduced tillage systems are two approaches that aim to increase soil biodiversity and general soil quality, through improved management of organic matter but differ in their emphasis on the use of chemical inputs for crop protection or soil disturbance, respectively. In North-western Europe experience with and knowledge of reduced tillage systems is still scarce, both in conventional and organic farming. Our study targeted both conventional and organic farming and aimed at 1) documenting reduced tillage practices within different agroecological contexts in NW Europe; 2) evaluating the effects of reduced tillage systems on soil biodiversity and soil ecosystem services; 3) increase understanding of agroecological factors that determine trade-offs between different ecosystem services. Earthworm species and nematode taxa were selected as indicator organisms to be studied for their known response to soil management and effects on soil functions. Additionally, soil organic matter, physical soil parameters and processes, and crop yields have been measured across multiple sites. Data have been collected over several cropping seasons in long term field experiments

  18. Improving communication between patients and providers using health information technology and other quality improvement strategies: focus on low-income children.

    Science.gov (United States)

    Ngo-Metzger, Quyen; Hayes, Gillian R; Yunan Chen; Cygan, Ralph; Garfield, Craig F

    2010-10-01

    Effective communication between providers and patients has been linked to improved outcomes. Previous reviews of quality improvement strategies, including health information technology (health IT), have not focused on the needs of low-income children. The authors conducted a systematic review of the literature on studies of communication surrounding the care of low-income children, with an emphasis on interventions and health IT.The search yielded six studies that focused on low-income children; three of the studies used health IT. Key informant interviews provided insight to the current use of health IT for provider-patient communication in geographically diverse, underresourced settings.The authors identify gaps between existing literature and clinical practice. Future research should focus on the specific impact of health IT in pediatric medicine, particularly in underresourced and safety net settings. These efforts should focus on the use of technological innovations to improve care for low-income children and their families.

  19. A Brief Review of Literature on Using Technology to Help Language Learners to Improve Their Language Skills

    Directory of Open Access Journals (Sweden)

    Eyup Bayram Guzel

    2015-04-01

    Full Text Available People have been fairly interested in what technology offers to them around a scope of human necessities and it has become a part of human life. In this study, experimental studies were reviewed for the purpose of how technology helps language learners improve their phonemic awareness, reading comprehension and vocabulary development skills. As a conclusion, experimental studies demonstrated that students showed significant improvements up to 70% in phonological awareness, while they demonstrated up to 76% of improvements in reading comprehension and up to 77% in vocabulary development. The use of computer-assisted technologies and its positive outcomes were encouraged to be used more widely in order to meet the diverse needs of students.

  20. Advanced manufacturing technologies for improved competitiveness of the South African manufacturing industry

    CSIR Research Space (South Africa)

    Tlale, NS

    2008-11-01

    Full Text Available In this paper the manufacturing environment with regards to technology and market is discussed. Both the South African and global view are given, together with technology management strategies. Value added products are described and determined...

  1. NEW COMMUNICATION MEANS AND THE ECONOMIC CHALLENGES BROUGHT IN MASS-MEDIA

    OpenAIRE

    Daniel BURTIC; BADULESCU Alina

    2014-01-01

    Analogic technology, the old ways of production, distribution, consume and economic fundaments of the mass-media industry are left behind by the new demands and requirements of the creative economy in the digitalization context of the mass-media system. In fact, not only mass-media goes through this transformation, but the whole society. The implications of the digital era are far long to be over and they will affect all mass-media segments: written press, audiovisual, on-line press and socia...

  2. Combining Sustainable Land Management Technologies to Combat Land Degradation and Improve Rural Livelihoods in Semi-arid Lands in Kenya

    Science.gov (United States)

    Mganga, K. Z.; Musimba, N. K. R.; Nyariki, D. M.

    2015-12-01

    Drylands occupy more than 80 % of Kenya's total land mass and contribute immensely to the national economy and society through agriculture, livestock production, tourism, and wild product harvesting. Dryland ecosystems are areas of high climate variability making them vulnerable to the threats of land degradation. Consequently, agropastoralists inhabiting these ecosystems develop mechanisms and technologies to cope with the impacts of climate variability. This study is aimed to; (1) determine what agropastoralists inhabiting a semi-arid ecosystem in Kenya attribute to be the causes and indicators of land degradation, (2) document sustainable land management (SLM) technologies being undertaken to combat land degradation, and (3) identify the factors that influence the choice of these SLM technologies. Vegetation change from preferred indigenous forage grass species to woody vegetation was cited as the main indicator of land degradation. Land degradation was attributed to recurrent droughts and low amounts of rainfall, overgrazing, and unsustainable harvesting of trees for fuelwood production. However, despite the challenges posed by climate variability and recurrent droughts, the local community is engaging in simple SLM technologies including grass reseeding, rainwater harvesting and soil conservation, and dryland agroforestry as a holistic approach combating land degradation and improving their rural livelihoods. The choice of these SLM technologies was mainly driven by their additional benefits to combating land degradation. In conclusion, promoting such simple SLM technologies can help reverse the land degradation trend, improve agricultural production, food security including access to food, and subsequently improve livelihoods of communities inhabiting dryland ecosystems.

  3. Combining Sustainable Land Management Technologies to Combat Land Degradation and Improve Rural Livelihoods in Semi-arid Lands in Kenya.

    Science.gov (United States)

    Mganga, K Z; Musimba, N K R; Nyariki, D M

    2015-12-01

    Drylands occupy more than 80% of Kenya's total land mass and contribute immensely to the national economy and society through agriculture, livestock production, tourism, and wild product harvesting. Dryland ecosystems are areas of high climate variability making them vulnerable to the threats of land degradation. Consequently, agropastoralists inhabiting these ecosystems develop mechanisms and technologies to cope with the impacts of climate variability. This study is aimed to; (1) determine what agropastoralists inhabiting a semi-arid ecosystem in Kenya attribute to be the causes and indicators of land degradation, (2) document sustainable land management (SLM) technologies being undertaken to combat land degradation, and (3) identify the factors that influence the choice of these SLM technologies. Vegetation change from preferred indigenous forage grass species to woody vegetation was cited as the main indicator of land degradation. Land degradation was attributed to recurrent droughts and low amounts of rainfall, overgrazing, and unsustainable harvesting of trees for fuelwood production. However, despite the challenges posed by climate variability and recurrent droughts, the local community is engaging in simple SLM technologies including grass reseeding, rainwater harvesting and soil conservation, and dryland agroforestry as a holistic approach combating land degradation and improving their rural livelihoods. The choice of these SLM technologies was mainly driven by their additional benefits to combating land degradation. In conclusion, promoting such simple SLM technologies can help reverse the land degradation trend, improve agricultural production, food security including access to food, and subsequently improve livelihoods of communities inhabiting dryland ecosystems.

  4. Improving business to customer communication : Applying lean and information and communication technologies

    OpenAIRE

    Brandel, Mikael C; Syarif, Mohammad H

    2010-01-01

    In this current economical environment business are looking to become more efficient to lower the costs and provide a better service. New technological advances are quickly being integrated to automate or more rapidly perform the task. Most of these technological advances are in the field of information and communication technology (ICT). Nevertheless, the introduction of technologies is not enough, as better management strategies and organization structures are needed to develop the business...

  5. Determinants of Farmers' Adoption of Improved Soil Conservation Technology in a Middle Mountain Watershed of Central Nepal

    Science.gov (United States)

    Tiwari, Krishna R.; Sitaula, Bishal K.; Nyborg, Ingrid L. P.; Paudel, Giridhari S.

    2008-08-01

    This study explores different socio-economic and institutional factors influencing the adoption of improved soil conservation technology (ISCT) on Bari land (Rainfed outward sloping terraces) in the Middle Mountain region of Central Nepal. Structured questionnaire survey and focus group discussion methods were applied to collect the necessary information from farm households. The logistic regression model predicted seven factors influencing the adoption of improved soil conservation technology in the study area including years of schooling of the household head, caste of the respondent, land holding size of the Bari land, cash crop vegetable farming, family member occupation in off farm sector, membership of the Conservation and Development Groups, and use of credit. The study showed that technology dissemination through multi-sectoral type community based local groups is a good option to enhance the adoption of improved soil conservation technology in the Middle Mountain farming systems in Nepal. Planners and policy makers should formulate appropriate policies and programs considering the farmers’ interest, capacity, and limitation in promoting improved soil conservation technology for greater acceptance and adoption by the farmers.

  6. Determinants of farmers' adoption of improved soil conservation technology in a middle mountain watershed of Central Nepal.

    Science.gov (United States)

    Tiwari, Krishna R; Sitaula, Bishal K; Nyborg, Ingrid L P; Paudel, Giridhari S

    2008-08-01

    This study explores different socio-economic and institutional factors influencing the adoption of improved soil conservation technology (ISCT) on Bari land (Rainfed outward sloping terraces) in the Middle Mountain region of Central Nepal. Structured questionnaire survey and focus group discussion methods were applied to collect the necessary information from farm households. The logistic regression model predicted seven factors influencing the adoption of improved soil conservation technology in the study area including years of schooling of the household head, caste of the respondent, land holding size of the Bari land, cash crop vegetable farming, family member occupation in off farm sector, membership of the Conservation and Development Groups, and use of credit. The study showed that technology dissemination through multi-sectoral type community based local groups is a good option to enhance the adoption of improved soil conservation technology in the Middle Mountain farming systems in Nepal. Planners and policy makers should formulate appropriate policies and programs considering the farmers' interest, capacity, and limitation in promoting improved soil conservation technology for greater acceptance and adoption by the farmers.

  7. Innovation in conservation, how information technology tools improve the ex situ management of plant genetic resources

    NARCIS (Netherlands)

    Hintum, van T.J.L.

    2012-01-01

    Many new technologies highly relevant to the PGR community have become available over the past years, especially in the fields of genomics and information technology. The effect of the second category of technologies on the ex situ manage-ment of plant genetic resources is explored. After a low init

  8. Clinical Inquiries: Can mobile technology improve weight loss in overweight and obese patients?

    Science.gov (United States)

    Harris, Lisa M; Mounsey, Anne; Nashelsky, Joan

    2017-02-01

    Yes, this technology can help in the short term. Mobile technology compared with minimal or no intervention increases short-term (⟨6 months) weight loss (1.4 to 2.7 kg) in overweight and obese patients. Interventions that combine nonelectronic measures with mobile technology increase weight loss more effectively (3.7 kg) than no intervention.

  9. Improving the technology of surfacing heterogeneous working layer on hot rolling bulky rolls

    Directory of Open Access Journals (Sweden)

    Віталій Петрович Iванов

    2016-07-01

    Full Text Available Ways to increase efficiency of rolls by enhancing resistance to the formation and development of cracks due to the anisotropy of the working layer properties were explored. The destruction mechanisms of such materials were considered. The possibility of cracks deceleration, due to the layer ruptures or abrupt change of its properties has been marked. It has been shown that the optimum combination of the means braking dislocations provides for a rational metal alloying. The analysis of the rolls of rolling mills service conditions as well as the analysis of types of wear and destruction of products made it possible to formulate requirements on the surface layer of the rolls properties. However increase in strength decreases ductility and toughness of the steel. The solution of the problem of the strength and plasticity increase necessitates either methods of metal deep cleaning of contaminants development or significant grain refinement. The part played by structural formations, such as non-metallic inclusions, carbide particles, grain boundaries, etc.in the kinetics of crack propagation has been studied. Since sharp contrast of the properties at the grain boundaries is inconsistent with the requirements of welding technology, the determining factor for making up the working layer is the service conditions. The durability of the roll is determined by allowable wear out of the layer between resharpenings. The correct choice of optimum parameters for the twq adjacent layers - operating and the layer to be maintained is the reserve to improve performance of the roll. The paper has proposed welding-up compositions making it possible to extend the durability due to the optimum ratio of the mechanical and thermal properties of adjacent layers. This approach can improve the durability of the deposited products both at the stage of nucleation and at the stage of thermal fatigue cracks growth

  10. Integrated insulin pump therapy with continuous glucose monitoring for improved adherence: technology update

    Directory of Open Access Journals (Sweden)

    Tumminia A

    2015-09-01

    Full Text Available Andrea Tumminia,1 Laura Sciacca,1 Lucia Frittitta,1 Sebastiano Squatrito,1 Riccardo Vigneri,2 Rosario Le Moli,1 Letizia Tomaselli2 1Endocrinology, Department of Clinical and Experimental Medicine, University of Catania, Garibaldi-Nesima Hospital, Catania, Italy; 2Endocrinology, Garibaldi-Nesima Hospital, Catania, Italy Abstract: Insulin pump therapy combined with real-time continuous glucose monitoring, known as sensor-augmented pump (SAP therapy, has been shown to improve metabolic control and to reduce the rate of hypoglycemia in adults with type 1 diabetes compared to multiple daily injections or standard continuous subcutaneous insulin infusion. Glycemic variability is also reduced in patients on SAP therapy. This approach allows patients to monitor their glucose levels being informed of glycemic concentration and trend. Trained diabetic patients, therefore, can appropriately modify insulin infusion and/or carbohydrate intake in order to prevent hypo- or hyperglycemia. For these reasons, SAP therapy is now considered the gold standard for type 1 diabetes treatment. To be clinically effective, however, devices and techniques using advanced technology should not only have the potential to theoretically ameliorate metabolic control, but also be well accepted by patients in terms of satisfaction and health-related quality of life, because these factors will improve treatment adherence and consequently overall outcome. SAP therapy is generally well tolerated by patients; however, many clinical trials have identified significant noncompliance in the use of this device, most notably in the pediatric and adolescent populations. In this review we aim to analyze the main reasons for good or poor adherence to SAP therapy and to provide useful tips in order to fully benefit from this kind of novel therapeutic approach. Keywords: sensor-augmented insulin pump therapy, type 1 diabetes, quality of life, patient adherence, continuous subcutaneous insulin

  11. 77 FR 47397 - Request for Nominations of Specific Drug/Biologic Product(s) That Could Be Brought Before the...

    Science.gov (United States)

    2012-08-08

    ... HUMAN SERVICES Food and Drug Administration Request for Nominations of Specific Drug/Biologic Product(s... invites the public to suggest one or more specific drug or biologic products that could be brought before... Drugs Advisory Committee AGENCY: Food and Drug Administration, HHS. ACTION: Notice; request for...

  12. A new and improved method for the preparation of drug nanosuspension formulations using acoustic mixing technology.

    Science.gov (United States)

    Leung, Dennis H; Lamberto, David J; Liu, Lina; Kwong, Elizabeth; Nelson, Todd; Rhodes, Timothy; Bak, Annette

    2014-10-01

    Drug discovery and development is a challenging area. During the drug optimization process, available drug compounds often have poor physicochemical and biopharmaceutical properties, making the proper in vivo evaluation of these compounds difficult. To address these challenges, drug nanoparticles of poorly soluble compounds have emerged as a promising formulation approach. Herein, we report on a new drug sparing technology utilizing low shear acoustic mixing to rapidly identify optimized nanosuspension formulations for a wide range of compounds with dramatically improved material and time efficiencies. This approach has several key advantages over typical methods of preparing nanoparticles, including miniaturization of the milling process, the ability to evaluate multiple formulation conditions in a high throughput manner, and direct translation to optimized formulation scale-up for in vivo studies. Furthermore, there are additional benefits obtained with this new approach resulting in nanosuspension formulations with significant stability and physical property enhancements over those obtained using traditional media milling techniques. These advantages make this approach highly suitable for the rapid evaluation of potential drug candidates in the discovery and development space.

  13. Retrogradation behaviour of high-amylose rice starch prepared by improved extrusion cooking technology.

    Science.gov (United States)

    Zhang, Yanjun; Liu, Wei; Liu, Chengmei; Luo, Shunjing; Li, Ti; Liu, Yunfei; Wu, Di; Zuo, Yanna

    2014-09-01

    Native rice starch (NRS, amylose/28.9%) was gelatinized by improved extrusion cooking technology (IECT) and retrograded (RRS) after low temperature storage (4 °C). The retrogradation behaviour of RRS was changed to low retrogradation percentage and low retrogradation rate. The retrogradation resulted in a high compact morphology. The melt enthalpy change and percentage of retrogradation of RRS was 3.68 J/g and 37.7%, respectively, compared to those of NRS (9.75 J/g, 100%). The retrogradation percentage for RRS was low during storage as shown as a low retrogradation rate (0.21 d(-1)) and a high Avrami exponent (0.89). The pattern of rice starch changed from A-type to amorphous and B-type. Both the relative crystallinity of RRS (12.7%) by the X-ray diffractograms and the ratio of the band height (0.63) in the FTIR spectra were low. The analysis of retrogradation structure and short-range molecular order further confirmed the retrogradation behaviour of rice starch after IECT treatment.

  14. Utilizing Radiofrequency Identification Technology to Improve Safety and Management of Blood Bank Supply Chains.

    Science.gov (United States)

    Coustasse, Alberto; Meadows, Pamela; Hall, Robert S; Hibner, Travis; Deslich, Stacie

    2015-11-01

    The importance of efficiency in the supply chain of perishable products, such as the blood products used in transfusion services, cannot be overstated. Many problems can occur, such as the outdating of products, inventory management issues, patient misidentification, and mistransfusion. The purpose of this article was to identify the benefits and barriers associated with radiofrequency identification (RFID) usage in improving the blood bank supply chain. The methodology for this study was a qualitative literature review following a systematic approach. The review was limited to sources published from 2000 to 2014 in the English language. Sixty-five sources were found, and 56 were used in this research study. According to the finding of the present study, there are numerous benefits and barriers to RFID utilization in blood bank supply chains. RFID technology offers several benefits with regard to blood bank product management, including decreased transfusion errors, reduction of product loss, and more efficient inventory management. Barriers to RFID implementation include the cost associated with system implementation and patient privacy issues. Implementation of an RFID system can be a significant investment. However, when observing the positive impact that such systems may have on transfusion safety and inventory management, the cost associated with RFID systems can easily be justified. RFID in blood bank inventory management is vital to ensuring efficient product inventory management and positive patient outcomes.

  15. Evaluation of Three Amorphous Drug Delivery Technologies to Improve the Oral Absorption of Flubendazole.

    Science.gov (United States)

    Vialpando, Monica; Smulders, Stefanie; Bone, Scott; Jager, Casey; Vodak, David; Van Speybroeck, Michiel; Verheyen, Loes; Backx, Katrien; Boeykens, Peter; Brewster, Marcus E; Ceulemans, Jens; Novoa de Armas, Hector; Van Geel, Katrien; Kesselaers, Emma; Hillewaert, Vera; Lachau-Durand, Sophie; Meurs, Greet; Psathas, Petros; Van Hove, Ben; Verreck, Geert; Voets, Marieke; Weuts, Ilse; Mackie, Claire

    2016-09-01

    This study investigates 3 amorphous technologies to improve the dissolution rate and oral bioavailability of flubendazole (FLU). The selected approaches are (1) a standard spray-dried dispersion with hydroxypropylmethylcellulose (HPMC) E5 or polyvinylpyrrolidone-vinyl acetate 64, both with Vitamin E d-α-tocopheryl polyethylene glycol succinate; (2) a modified process spray-dried dispersion (MPSDD) with either HPMC E3 or hydroxypropylmethylcellulose acetate succinate (HPMCAS-M); and (3) confining FLU in ordered mesoporous silica (OMS). The physicochemical stability and in vitro release of optimized formulations were evaluated following 2 weeks of open conditions at 25°C/60% relative humidity (RH) and 40°C/75% RH. All formulations remained amorphous at 25°C/60% RH. Only the MPSDD formulation containing HPMCAS-M and 3/7 (wt./wt.) FLU/OMS did not crystallize following 40°C/75% RH exposure. The OMS and MPSDD formulations contained the lowest and highest amount of hydrolyzed degradant, respectively. All formulations were dosed to rats at 20 mg/kg in suspension. One FLU/OMS formulation was also dosed as a capsule blend. Plasma concentration profiles were determined following a single dose. In vivo findings show that the OMS capsule and suspension resulted in the overall highest area under the curve and Cmax values, respectively. These results cross-evaluate various amorphous formulations and provide a link to enhanced biopharmaceutical performance.

  16. Improvement of Quality of Carica papaya L. with Clove Oil as Preservative in Edible Coating Technology

    Directory of Open Access Journals (Sweden)

    Eny Kusrini

    2015-12-01

    Full Text Available We have studied utilization of essential clove oil, extracted from clove buds by hydrodistillation, as preservative in edible packaging technology. Preservative of essential clove oil was applied on chopped papaya fruits by using two methods, namely spray and brush. The effects of concentration of clove oil from 0.05 to 0.20% on the preservation of papaya fruits (Carica papaya L. at room temperature (25 °C were also evaluated. Physicochemical and in vitro microbiological activities on the papaya fruits that were stored at 25 oC and 85-90% relative humidity were investigated in details. The results indicate that the clove oil at concentration ≥0.10% suppressed the decay time, 10% weight loss, 0.03 g citric acid/100 g in acidity titration test, and 20% pH value from those of control sample of papaya fruits kept in a storage. The population of fungi and bacteria were efficiently reduced by 90% when the clove oil at concentration ≥0.10% was applied as preservative on papaya fruits. This finding suggested that the extracted essential clove oil acted as effective antifungal and antibacterial agents. Preservative by essential clove oil improved the quality of fruits to extend the product shelf life and to reduce the risk of microbial growth on fruits surface.

  17. Improving Assistive Technology Service by Using 3D Printing: Three Case Studies.

    Science.gov (United States)

    Watanabe, Takashi; Hatakeyama, Takuro; Tomiita, Mitsuru

    2015-01-01

    Assistive technology services are essential for adapting assistive devices to the individual needs of users with disabilities. In this study, we attempted to apply three-dimensional (3D) printing technology to three actual cases, and to study its use, effectiveness, and future applications. We assessed the usefulness of 3D printing technology by categorizing its utilization after reviewing the outcomes of these case studies. In future work, we aim to gather additional case studies and derive information on using 3D printing technology that will enable its effective application in the process of assistive technology services.

  18. Improved Performance of an Air Cooled Condenser (ACC) Using SPX Wind Guide Technology at Coal-Based Thermoelectric Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Ken Mortensen

    2010-12-31

    This project added a new airflow enhancement technology to an existing ACC cooling process at a selected coal power plant. Airflow parameters and efficiency improvement for the main plant cooling process using the applied technology were determined and compared with the capabilities of existing systems. The project required significant planning and pre-test execution in order to reach the required Air Cooled Condenser system configuration for evaluation. A host Power Plant ACC system had to be identified, agreement finalized, and addition of the SPX ACC Wind Guide Technology completed on that site. Design of the modification, along with procurement, fabrication, instrumentation, and installation of the new airflow enhancement technology were executed. Baseline and post-modification cooling system data was collected and evaluated. The improvement of ACC thermal performance after SPX wind guide installation was clear. Testing of the improvement indicates there is a 5% improvement in heat transfer coefficient in high wind conditions and 1% improvement at low wind speed. The benefit increased with increasing wind speed. This project was completed on schedule and within budget.

  19. Electrical machines, in particular generators: superconductor technology in competition with improved conventional technology; Elektrische Maschinen, insbesondere Generatoren: Supraleiter-Technologie im Wettbewerb mit verbesserter konventioneller Technologie

    Energy Technology Data Exchange (ETDEWEB)

    Joho, R.; Ginet, C.; Schleussinger, A.

    2006-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) summarises work done within the framework of a second project on the use of superconductor technology and conventional technology in electrical machines. The two variants, a generator using second-generation high-temperature superconductors (HTSC) and one using improved conventional technology are described and compared. The use of various coolants for the windings of generators of various types and usage is described and the optimisation of winding-geometry is discussed. The refrigeration equipment used to provide low-temperature coolant is looked at and the energy balance for the combination of generator and cooling system is discussed. The conclusions drawn by the project are presented and the advantages offered by both variants are discussed.

  20. Application of Evolutionary Encryption 2D Barcode Generation Technology in Agricultural Product Quality and Safety Traceability System

    Institute of Scientific and Technical Information of China (English)

    Xiaojun; ZHONG; Zhijie; LAI; Yan; CHEN; Jianxin; QIAN; Xiaocong; HONG; Caiyi; LI

    2014-01-01

    Two-dimensional(2D) barcode technology is an electronic tagging technology based on combination of computer and optical technology. It is an important way of information collection and input. 2D barcode technology has been widely used in various fields of logistics,production automation,and e-commerce,but it also has brought about a series of safety problems. Based on evolutionary encryption technology,this paper improved algorithm of traditional 2D barcode generation,to improve forgery- proof performance of 2D barcode. This algorithm is applied to agricultural products quality and safety traceability system and the results show that it is effective.

  1. Improvement of auditing technology of safety analysis through thermal-hydraulic separate effect tests

    Energy Technology Data Exchange (ETDEWEB)

    No, Hee Cheon; Moon, Young Min; Lee, Dong Won; Lee, Sang Ik; Kim, Eung Soo; Yeom, Keum Soo [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2002-03-15

    The objective of the present research is to perform the separate effect tests and to assess the RELAP5/MOD3.2 code for the analysis of thermal-hydraulic behavior in the reactor coolant system and the improvement of the auditing technology of safety analysis. Three Separate Effect Tests (SETs) are the reflux condensation in the U-tube, the direct contact condensation in the hot-leg and the mixture level buildup in the pressurizer. The experimental data and the empirical correlations are obtained through SETs. On the ases of the three SET works, models in RELAP5 are modified and improved, which are compared with the data. The Korea Standard Nuclear Power Plant (KSNP) are assessed using the modified RELAP5. In the reflux condensation test, the data of heat transfer coefficients and flooding are obtained and the condensation models are modified using the non-iterative model, as results, modified code better predicts the data. In the direct contact condensation test, the data of heat transfer coefficients are obtained for the cocurrent and countercurrent flow between the mixture gas and the water in condition of horizontal stratified flow. Several condensation and friction models are modified, which well predict the present data. In the mixture level test, the data for the mixture level and the onset of water draining into the surge line are obtained. The standard RELAP5 over-predicts the mixture level and the void fraction in the pressurizer. Simple modification of model related to the pool void fraction is suggested. The KSNP is assessed using the standard and the modified RELAP5 resulting from the experimental and code works for the SETs. In case of the pressurizer manway opening with available secondary side of the steam generators, the modified code predicts that the collapsed level in the pressurizer is little accumulated. The presence and location of the opening and the secondary condition of the steam generators have an effect on the coolant inventory. The

  2. Improvement of workflow and processes to ease and enrich meaningful use of health information technology

    Directory of Open Access Journals (Sweden)

    Singh R

    2013-11-01

    Full Text Available Ranjit Singh,1 Ashok Singh,2 Devan R Singh,3 Gurdev Singh1 1Department of Family Medicine, UB Patient Safety Research Center, School of Medicine and Management, State University of NY at Buffalo, NY, USA; 2Niagara Family Medicine Associates, Niagara Falls, NY, USA; 3SaferPatients LLC, Lewiston, NY, USA Abstract: The introduction of health information technology (HIT can have unexpected and unintended patient safety and/or quality consequences. This highly desirable but complex intervention requires workflow changes in order to be effective. Workflow is often cited by providers as the number one 'pain point'. Its redesign needs to be tailored to the organizational context, current workflow, HIT system being introduced, and the resources available. Primary care practices lack the required expertise and need external assistance. Unfortunately, the current methods of using esoteric charts or software are alien to health care workers and are, therefore, perceived to be barriers. Most importantly and ironically, these do not readily educate or enable staff to inculcate a common vision, ownership, and empowerment among all stakeholders. These attributes are necessary for creating highly reliable organizations. We present a tool that addresses US Accreditation Council for Graduate Medical (ACGME competency requirements. Of the six competencies called for by the ACGME, the two that this tool particularly addresses are 'system-based practice' and 'practice-based learning and continuing improvement'. This toolkit is founded on a systems engineering approach. It includes a motivational and orientation presentation, 128 magnetic pictorial and write-erase icons of 40 designs, dry-erase magnetic board, and five visual aids for reducing cognitive and emotive biases in staff. Pilot tests were carried out in practices in Western New York and Colorado, USA. In addition, the toolkit was presented at the 2011 North American Primary Care Research Group (NAPCRG

  3. NEW COMMUNICATION MEANS AND THE ECONOMIC CHALLENGES BROUGHT IN MASS-MEDIA

    Directory of Open Access Journals (Sweden)

    Daniel BURTIC

    2014-12-01

    Full Text Available Analogic technology, the old ways of production, distribution, consume and economic fundaments of the mass-media industry are left behind by the new demands and requirements of the creative economy in the digitalization context of the mass-media system. In fact, not only mass-media goes through this transformation, but the whole society. The implications of the digital era are far long to be over and they will affect all mass-media segments: written press, audiovisual, on-line press and social media. The economic aspects, as well as the technical ones, editorial, distribution and final consumers aspects, all will be different from what we experienced in media industry until digitalization. The question is, are we ready to enter into a new economy: the digital economy? Are we ready to enter into a new culture: the digital culture? We entered in the smart world, but do we understand what is happening? The editorial teams that experience a fundamental change of thinking, will be able to overcome this times challenges? These are some of the questions that bothered us along this research. We tried to block in the logic of the system with the new varieties and variables determined by the digital era in order to understand it. We tried to discover the elements whereby mass-media industry and economy can profit more of the digitalization advantages. We tried to find economic solutions for the negative consequences produced in the process of media industry digitalization to be attenuated.

  4. Fifth DOE symposium on enhanced oil and gas recovery and improved drilling technology. Volume 2. Oil

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. [ed.

    1979-01-01

    Volume 2 contains papers from the following sessions: residual oil determination; thermal methods; heavy oil-tar sands; technology transfer; and carbon dioxide flooding. Individual papers were processed.

  5. Measurement and improvement of indoor air quality in an information technology classroom

    National Research Council Canada - National Science Library

    Tomić Mladen A; Milutinović Biljana B; Živković Predrag M; Đekić Petar S; Boričić Aleksandra D

    2014-01-01

    ... technology classrooms, where a large number of students spend long periods of time. Poor indoor environment can negatively affect scholarly performances and cause discomfort and poor work performance...

  6. A University Engagement Model for Achieving Technology Adoption and Performance Improvement Impacts in Healthcare, Manufacturing, and Government

    Science.gov (United States)

    McKinnis, David R.; Sloan, Mary Anne; Snow, L. David; Garimella, Suresh V.

    2014-01-01

    The Purdue Technical Assistance Program (TAP) offers a model of university engagement and service that is achieving technology adoption and performance improvement impacts in healthcare, manufacturing, government, and other sectors. The TAP model focuses on understanding and meeting the changing and challenging needs of those served, always…

  7. Genomics for food biotechnology : prospects of the use of high-throughput technologies for the improvement of food microorganisms

    NARCIS (Netherlands)

    Kuipers, OP

    1999-01-01

    Functional genomics is currently the most effective approach for increasing the knowledge at the molecular level of metabolic and adaptive processes in whole cells. High-throughput technologies, such as DNA microarrays, and improved-two-dimensional electrophoresis methods combined with tandem

  8. Advances in RNA interference technology and its impact on nutritional improvement, disease and insect control in plants.

    Science.gov (United States)

    Katoch, Rajan; Thakur, Neelam

    2013-03-01

    This review highlights the advances in the knowledge of RNA interference (RNAi) and discusses recent progress on the functionality of different components RNAi machinery operating in the organisms. The silencing of genes by RNA interference has become the technology of choice for investigation of gene functions in different organisms. The refinement in the knowledge of the endogenous RNAi pathways in plants along with the development of new strategies and applications for the improvement of nutritional value of important agricultural crops through suppression of genes in different plants have opened new vistas for nutritional security. The improvement in the nutritional status of the plants and reduction in the level of toxins or antinutrients was desired for long, but the available technology was not completely successful in achieving the tissue specific regulation of some genes. In the recent years, a number of economically important crop plants have been tested successfully for improving plant nutritional value through metabolic engineering using RNAi. The implications of this technology for crop improvement programs, including nutritional enrichment, reduction of antinutrients, disease, and insect control have been successfully tested in variety of crops with commercial considerations. The enhancement of the nutraceutical traits for the desired health benefits in common crop plants through manipulation of gene expression has been elaborated in this article. The tremendous potential with RNAi technology is expected to revolutionize the modern agriculture for meeting the growing challenges is discussed.

  9. Information Technology Process Improvement Decision-Making: An Exploratory Study from the Perspective of Process Owners and Process Managers

    Science.gov (United States)

    Lamp, Sandra A.

    2012-01-01

    There is information available in the literature that discusses information technology (IT) governance and investment decision making from an executive-level perception, yet there is little information available that offers the perspective of process owners and process managers pertaining to their role in IT process improvement and investment…

  10. How To Form and Operate a Local Alliance. A Handbook for Local Action To Improve Science and Technology Education.

    Science.gov (United States)

    Livermore, Arthur H.; And Others

    The growth of local alliances (partnerships of business, industry, labor, professional associations, educators, and other concerned groups) is evidence of a widespread public concern for improving the quality of science and technology education. This document defines the concept of local alliances and discusses aspects of the founding and…

  11. Strategies for improvement of spectrum capacity for WiMax cellular systems by Cognitive Radio Technology supported by Relay Stations

    DEFF Research Database (Denmark)

    Frederiksen, Flemming Bjerge; Prasad, Ramjee

    2007-01-01

    Methods to enhance the use of the frequency spectrum by automatical spectrum sensing plus spectrum sharing in a cognitive radio technology context will be presented and discussed in this paper. Ideas to improve the wireless transmission by orthogonal OFDM-based communication and to increase the c...

  12. Improving Science, Technology and Mathematics Students' Achievement: Imperatives for Teacher Preparation in the Caribbean Colleges and Universities

    Science.gov (United States)

    Ogunkola, Babalola J.

    2012-01-01

    The concerns of this article are the unacceptable status of Science, Technology and Mathematics (STM) Education in the Caribbean and how to improve the students' achievement in the subjects involved through the instrumentality of better preparation of teachers by the Colleges and University faculties training teachers in the region. The index for…

  13. Strategies for improvement of spectrum capacity for WiMax cellular systems by Cognitive Radio Technology supported by Relay Stations

    DEFF Research Database (Denmark)

    Frederiksen, Flemming Bjerge; Prasad, Ramjee

    2007-01-01

    Methods to enhance the use of the frequency spectrum by automatical spectrum sensing plus spectrum sharing in a cognitive radio technology context will be presented and discussed in this paper. Ideas to improve the wireless transmission by orthogonal OFDM-based communication and to increase...

  14. Improving Spectral Capacity and Wireless Network Coverage by Cognitive Radio Technology and Relay Nodes in Cellular Systems

    DEFF Research Database (Denmark)

    Frederiksen, Flemming Bjerge

    2008-01-01

    Methods to enhance the use of the frequency spectrum by automatical spectrum sensing plus spectrum sharing in a cognitive radio technology context have been presented and discussed in this paper. Ideas to improve the wireless transmission by orthogonal OFDM-based communication and to increase...

  15. Consortia for Improving Medicine with Innovation and Technology (formerly known as Center for Integration of Medicine and Innovative Technology)

    Science.gov (United States)

    2015-12-01

    Rapid Determination of Pain: Field and Surgical Application 2014 Out - 001882 14-1882 Pending Cash, Sydney Microelectrode recordings and advanced... stroke related dysphagia 2012 Out - 001708 12-1187 Award Closed Lee, Yong-Tae Improving Recovery after Stroke via Electrical Stimulation of Proprioceptors...Award Closed Mavroidis, Constantinos Smart Orthoses for Home Based Tele- Rehabilitation Systems 2012 Out - 001715 12-1278 Award Closed Mazumder, Malay

  16. Improved Tubulars for Better Economics in Deep Gas Well Drilling using Microwave Technology

    Energy Technology Data Exchange (ETDEWEB)

    Dinesh Agrawal; Paul Gigl; Mahlon Dennis

    2006-02-01

    The objective of the research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration. The current process of the manufacture long tubular steel products consists of shaping the tube from flat strip, welding the seam and sections into lengths that can be miles long, and coiling onto reels. However, the welds, that are a weak point, now limit the performance of the coil tubing. This is not only from a toughness standpoint but also from a corrosion standpoint. By utilizing the latest developments in the sintering of materials with microwave energy and powder metal extrusion technology for the manufacture of seamless coiled tubing and other tubular products, these problems can be eliminated. The project is therefore to develop a continuous microwave process to sinter continuously steel tubulars and butt-join them using microwave/induction process. The program started about three years ago and now we are in the middle of Phase II. In Phase I (which ended in February 2005) a feasibility study of the extrusion process of steel powder and continuously sinter the extruded tubing was conducted. The research program has been based on the development of microwave technology to process tubular specimens of powder metals, especially steels. The existing microwave systems at the Materials Research Laboratory (MRL) and Dennis Tool Company (DTC) were suitably modified to process tubular small specimens. The precursor powder metals were either extruded or cold isostatically pressed (CIP) to form tubular specimens. After conducting an extensive and systematic investigation of extrusion process for producing long tubes, it was determined that there were several difficulties in adopting extrusion process and it cannot be economically used for producing thousands of feet long green tubing. Therefore, in the Phase II the

  17. Using Technology and Mentorship to Improve Teacher Pedagogy and Educational Opportunities in Rural Nicaragua

    Directory of Open Access Journals (Sweden)

    Anni Lindenberg

    2016-02-01

    Full Text Available This study used ethnographic methods to understand factors influencing the implementation of an educational intervention combining short math content videos with teacher trainings and mentorship in high-poverty primary schools in Nicaragua with implications for rural school reform. Educators in rural schools in Latin American face serious obstacles to improve classroom instruction and pedagogy, including lack of resources and overcrowding. Research suggests an over-reliance on input-output models in which inputs (e.g. teacher salaries, textbooks, technology, computer labs, numbers of classrooms, etc. are expected to produce particular outputs (student retention, lowering drop-out rates, increasing graduation rates, etc.; however, studies show that regardless of the resources, much depends on effective use of resources for successful teaching and learning (O'Sullivan, 2006; L. S. Shulman, 1987. While input/output models provide insights into an educational systems economic efficiency, they do not offer insight into what actually transpires inside of a classroom (O'Sullivan, 2006. Much depends on effective training and use of these very resources. Though systemic issues in the Nicaraguan educational system produced numerous obstacles for the eleven participating 3rd and 6th grade teachers, the educational intervention model supported teachers’ ability to be innovative and grow their practice in four ways: a increased pedagogical knowledge; b opportunities to collaborate and support one another as a community of teachers; c flexibility in adaptation of the intervention model to their specific classroom context; and d use of videos as supportive resources for content knowledge.

  18. The use of 'Omics technology to rationally improve industrial mammalian cell line performance.

    Science.gov (United States)

    Lewis, Amanda M; Abu-Absi, Nicholas R; Borys, Michael C; Li, Zheng Jian

    2016-01-01

    Biologics represent an increasingly important class of therapeutics, with 7 of the 10 top selling drugs from 2013 being in this class. Furthermore, health authority approval of biologics in the immuno-oncology space is expected to transform treatment of patients with debilitating and deadly diseases. The growing importance of biologics in the healthcare field has also resulted in the recent approvals of several biosimilars. These recent developments, combined with pressure to provide treatments at lower costs to payers, are resulting in increasing need for the industry to quickly and efficiently develop high yielding, robust processes for the manufacture of biologics with the ability to control quality attributes within narrow distributions. Achieving this level of manufacturing efficiency and the ability to design processes capable of regulating growth, death and other cellular pathways through manipulation of media, feeding strategies, and other process parameters will undoubtedly be facilitated through systems biology tools generated in academic and public research communities. Here we discuss the intersection of systems biology, 'Omics technologies, and mammalian bioprocess sciences. Specifically, we address how these methods in conjunction with traditional monitoring techniques represent a unique opportunity to better characterize and understand host cell culture state, shift from an empirical to rational approach to process development and optimization of bioreactor cultivation processes. We summarize the following six key areas: (i) research applied to parental, non-recombinant cell lines; (ii) systems level datasets generated with recombinant cell lines; (iii) datasets linking phenotypic traits to relevant biomarkers; (iv) data depositories and bioinformatics tools; (v) in silico model development, and (vi) examples where these approaches have been used to rationally improve cellular processes. We critically assess relevant and state of the art research

  19. Impact of genetically improved fish species and technology on selected hatchery and fish production in Bangladesh

    Directory of Open Access Journals (Sweden)

    MS Islam

    2017-06-01

    Full Text Available The study was carried out in IAPP commanding areas from July to September 2015. A total of 8 hatchery and 240 farmers were selected for this study from Rangpur and Barisal region. About 153% Tilapia production increased which was from 34 to 86 lakh, which was 148% in Rangpur district. Thai koi production was increased about 320% in Rangpur and it was 152% in Barisal. It was observed that, per hatchery Tilapia profit was Tk. 17.35 lakh and Tk. 17.18 lakh in Rangpur and Barisal, respectively. While, total profit was 3.9 times more for Thai koi in Rangpur and it was about 1.7 times more in Barisal after IAPP-BFRI project implementation. Impact of improved germplasm on grow out system was estimated. Finding shows that before IAPP-BFRI project the average harvesting weight of tilapia fish was 122g but after using IAPP-BFRI germplasm, it increased to 194g in Rangpur district. In case of Thai Koi, the harvesting weight gain was 26% in Rangpur district and it was statistically significant at 1% level. Survey results also show that per acre profit was only Tk.86671 for Tilapia farming before IAPP whereas it was increased to Tk. 234853 after IAPP-BFRI intervention. At the same time, profit from Thai Koi was increased about 189% after IAPPBFRI activities. Similarly, profit was increased about 86% in case of Pangus farming and this positive impact was statistically significant at 1% level. Therefore, it may conclude that, farmers can significantly increase Tilapia, Thai Koi and Pangus production as well as can maximize profit using IAPP technology.

  20. Impact of geothermal technology improvements on royalty collections on federal lands: Volume II: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1988-10-01

    This volume contains the appendices for the ''Impact of Geothermal Technology Improvements on Royalty Collections on Federal Lands, Final Report, Volume I.'' The material in this volume supports the conclusions presented in Volume I and details each Known Geothermal Resource Area's (KGRA's) royalty estimation. Appendix A details the physical characteristics of each KGRA considered in Volume I. Appendix B supplies summary narratives on each state which has a KGRA. The information presented in Appendix C shows the geothermal power plant area proxies chosen for each KGRA considered within the report. It also provides data ranges which fit into the IMGEO model for electric energy cost estimates. Appendix D provides detailed cost information from the IMGEO model if no Geothermal Program RandD goals were completed beyond 1987 and if all the RandD goals were completed by the year 2000. This appendix gives an overall electric cost and major system costs, which add up to the overall electric cost. Appendix E supplies information for avoided cost projections for each state involved in the study that were used in the IMGEO model run to determine at what cost/kWh a 50 MWe plant could come on line. Appendix F supplies the code used in the determination of royalty income, as well as, tabled results of the royalty runs (detailed in Appendix G). The tabled results show royalty incomes, assuming a 10% discount rate, with and without RandD and with and without a $0.01/kWh transmission cost. Individual data sheets for each KGRA royalty income run are presented in Appendix G.

  1. Using virtual reality and game technology to assist command and control

    Science.gov (United States)

    Riead, Lorien H.; Straub, James; Mangino, Joseph

    2017-04-01

    Recent improvements in virtual reality hardware have brought this technology to the point where easily-obtained commercial equipment can conceivably provide an affordable and relatively unexplored alternative to the traditional monitor and keyboard view of the tactical space. In addition, commercially available game engines provide several advantages for tactical applications. Using these technologies, we have created a concept of a low-cost display that allows for real-time immersive planning and strategy, with suggestions for further exploration.

  2. Advantages Brought on by Implementing the e-Management within S.M.E.S in Romania by Creating a Durable Development on the Troubled Background within the Business Environment

    OpenAIRE

    CORNELIU GÂRJOABĂ

    2011-01-01

    The informational systems management represents today an indispensable instrument of the modern management. Their continuous improvement doubled by the improvement of calculus techniques offer increased possibilities to take over larger segments of the decision making activity developed by the deciding human factor. In order to obtain economic advantages through capitalizing the benefits brought by the informational society and by the presence of internet, it is necessary to implement the e-M...

  3. ADVANTAGES BROUGHT ON BY IMPLEMENTING THE e-MANAGEMENT WITHIN S.M.E.s IN ROMANIA BY CREATING A DURABLE DEVELOPMENT ON THE TROUBLED BACKGROUND WITHIN THE BUSINESS ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    CORNELIU GÂRJOABĂ

    2011-01-01

    Full Text Available The informational systems management represents today an indispensable instrument of the modern management. Their continuous improvement doubled by the improvement of calculus techniques offer increased possibilities to take over larger segments of the decision making activity developed by the deciding human factor. In order to obtain economic advantages through capitalizing the benefits brought by the informational society and by the presence of internet, it is necessary to implement the e-Management that ensures an increased business management capacity.

  4. Creating a Personal Technology Improvement Plan for Teachers of the Gifted

    Science.gov (United States)

    Besnoy, Kevin

    2007-01-01

    There is a high incidence of today's gifted students independently interacting with their global community through technology tools. Teachers of the gifted (GT teachers) must possess an understanding of technology processes and concepts in order to engage their students through instructionally meaningful and appropriate lessons. Although many…

  5. Improving Science Student Teachers' Self-Perceptions of Fluency with Innovative Technologies and Scientific Inquiry Abilities

    Science.gov (United States)

    Çalik, Muammer; Ebenezer, Jazlin; Özsevgeç, Tuncay; Küçük, Zeynel; Artun, Hüseyin

    2015-01-01

    The aim of this study was to investigate the effects of "Environmental Chemistry" elective course via Technology-Embedded Scientific Inquiry (TESI) model on senior science student teachers' (SSSTs) self-perceptions of fluency with innovative technologies (InT) and scientific inquiry abilities. The study was conducted with 117 SSSTs (68…

  6. Improving grade 7 students’ achievement in initial algebra through a technology-based intervention.

    NARCIS (Netherlands)

    Jupri, A.; Drijvers, P.H.M.|info:eu-repo/dai/nl/074302922; Van den Heuvel-Panhuizen, M.|info:eu-repo/dai/nl/069266255

    2015-01-01

    Digital technology plays an increasingly important role in daily life, mathematics education and algebra education in particular. To investigate the effect of a technology-rich intervention related to initial algebra on the achievement of 12–13 year old Indonesian students, we set up an experiment.

  7. Technology as Mediation Tool for Improving Teaching Profession in Higher Education Practices

    Science.gov (United States)

    Altinay-Gazi, Zehra; Altinay-Aksal, Fahriye

    2017-01-01

    Technology became a mediation tool for forming information and developing skills is teacher education programs of higher education institutions because technological tools can be used for self-reflection of prospective teachers' teaching performances. Practical implementation of teacher education programmes is a part of quality indicator in higher…

  8. Improving Science Student Teachers' Self-Perceptions of Fluency with Innovative Technologies and Scientific Inquiry Abilities

    Science.gov (United States)

    Çalik, Muammer; Ebenezer, Jazlin; Özsevgeç, Tuncay; Küçük, Zeynel; Artun, Hüseyin

    2015-01-01

    The aim of this study was to investigate the effects of "Environmental Chemistry" elective course via Technology-Embedded Scientific Inquiry (TESI) model on senior science student teachers' (SSSTs) self-perceptions of fluency with innovative technologies (InT) and scientific inquiry abilities. The study was conducted with 117 SSSTs (68…

  9. Using Inexpensive Technology and Multimedia to Improve Science Education in Rural Communities of Nepal

    Science.gov (United States)

    Neupane, Sujaya

    2014-01-01

    This article explores an ongoing project that promotes science education in rural communities of western Nepal by using affordable technology. With the advent of inexpensive technology and multimedia resources, teaching materials for science education can be accessed with a much smaller budget than was previously possible. A preliminary survey…

  10. Utilizing Technology to Improve the Administration of Instructional Physical Activity Programs in Higher Education

    Science.gov (United States)

    Melton, Bridget; Burdette, Trey

    2011-01-01

    The purpose of this article is to provide examples of how technology is being used in one university to increase the organization and effectiveness of instructional physical activity programs (IPAPs). The article outlines ways in which technology can organize materials for students, instructors, and programs. Additionally, the article describes…

  11. Improving Technology Competency and Disposition of Beginning Pre-Service Teachers with Digital Storytelling

    Science.gov (United States)

    Heo, Misook

    2011-01-01

    This study examined the effects of the digital storytelling experience of beginning pre-service teachers on their self-efficacy in educational technology and disposition toward change with regard to new technological approaches to teaching. A total of 76 freshmen participated in the study. After participating in a brief tutorial session, the…

  12. Improving grade 7 students’ achievement in initial algebra through a technology-based intervention.

    NARCIS (Netherlands)

    Jupri, A.; Drijvers, P.H.M.|info:eu-repo/dai/nl/074302922; Van den Heuvel-Panhuizen, M.|info:eu-repo/dai/nl/069266255

    2015-01-01

    Digital technology plays an increasingly important role in daily life, mathematics education and algebra education in particular. To investigate the effect of a technology-rich intervention related to initial algebra on the achievement of 12–13 year old Indonesian students, we set up an experiment.

  13. Improving Undergraduate Student Satisfaction with the Consumer Behavior Course: Will Interactive Technology Help?

    Science.gov (United States)

    Eastman, Jacqueline K.; Iyer, Rajesh; Eastman, Kevin L.

    2011-01-01

    In this paper, we measure the impact of interactive technology on student satisfaction and find support for the hypothesis that students who find a class is more interesting because of the use of interactive technology will be more satisfied with the course. The results also support the hypothesis that if students like the course, they will be…

  14. Improving Technological Pedagogical Content Knowledge (TPACK) of Pre-Service English Language Teachers

    Science.gov (United States)

    Ersanli, Ceylan Yangin

    2016-01-01

    Developing as teachers and optimizing learning experiences for future students is the ultimate goal in technology use in teacher education programs. This study aims to explore the effectiveness of a five-week workshop and training sessions on Technological Pedagogical Content Knowledge (TPACK) of pre-service English language teachers. The…

  15. Improving Technology Acceptance Modeling for Disadvantaged Communities Using a Systems Engineering Approach

    Science.gov (United States)

    Fletcher, Jordan L.

    2013-01-01

    Developing nations are poised to spend billions on information and communication technology (ICT) innovation in 2020. A study of the historical adoption of ICT in developing nations has indicated that their adoption patterns do not follow typical technology innovation adoption models. This study addressed the weaknesses found in existing…

  16. A study on the depression levels of children who are brought to the forensic DNA laboratory for paternity testing.

    Science.gov (United States)

    Akduman, Gülümser Gültekin

    2012-01-01

    This study aims to identify the depression levels of children who were brought to the forensic DNA laboratory for paternity testing. A total of 35 such children were enrolled in the study. Data were gathered using the parent interview form, general information form for children, and the "Child Depression Scale" as it had been tested for validity and reliability in the 6-17 year age group in the country. Data were analyzed using one-way analysis of variance and Scheffe test. The results showed that the age of children who were brought in for paternity testing created a meaningful difference in their depression scores (p < 0.01) while gender did not. In addition, c. 63% of the children in this study did not know why they were in the laboratory, which also caused a meaningful difference in depression scores (p < 0.01).

  17. The effectiveness of experimental technology of attracting students to physical activity in improving orientation of physical condition

    Directory of Open Access Journals (Sweden)

    Yurchyshyn Y.V.

    2012-09-01

    Full Text Available The effectiveness of designed technologies to attract students during physical education to physical activity improving index is experimentally verified. 174 girls and 171 guys participated in this investigation. Found that the developed technology provides significantly better results than the traditional implementation of the contents of the current program in the following indicators: level of expression at the end of the semester and academic year (the current, final indexes of physical condition, theoretical preparedness in organization and implementation of physical activity improving orientation; number of indexes that in these periods improved, missed days due of sickness, condition, systematic and parameters of motor activity in the student's extracurricular time. These and source control implemented during a special sports and fitness west adversarial method, operational -- at each lesson for assessment of physical activity opportunities to current students.

  18. Improving the Performance and Antifouling Properties of Thin-Film Composite Membranes for Water Separation Technologies

    Science.gov (United States)

    Tiraferri, Alberto

    Membrane-based water separation processes utilize semi-permeable membranes to retain dissolved solids and contaminants. Deployment of these technologies for desalination and wastewater reuse has the potential to sustainably increase the supply of potable, agricultural, and industrial water. Despite considerable development of semi-permeable membranes in the last decades, several design obstacles hampering their progress have yet to be overcome. Specifically, major membrane improvements are currently sought with respect to their performance and productivity, as well as their resistance to fouling. This dissertation research aims at the advancement of semi-permeable membranes by rational optimization of their design to: (i) understand and improve their transport properties and (ii) reduce fouling by organic molecules and delay biofouling by microorganisms. In particular, thin-film composite polyamide membranes for both reverse osmosis and forward osmosis processes are the main target of the investigation. The structural and physicochemical properties of thin-film composite membranes are both characterized and tailored through implementation of original techniques and novel functionalization protocols. The membrane structure and morphology are rationally modified to enhance the mass transport within the support layer. The influence of fabrication conditions on support layer formation and on its final structure is elucidated. The intricate interrelationship among the performance of the different layers of the composite membrane is highlighted and a new protocol is developed to characterize the transport properties of membranes deployed in forward osmosis processes. Novel approaches to impart targeted properties to the active surface of thin-film composite membranes are also proposed. The functionalization is achieved by exploiting the inherent moieties of the polyamide layer to irreversibly bind nanomaterials with desired properties. An experimental method to determine

  19. Urban expansion brought stress to food security in China: Evidence from decreased cropland net primary productivity.

    Science.gov (United States)

    He, Chunyang; Liu, Zhifeng; Xu, Min; Ma, Qun; Dou, Yinyin

    2017-01-15

    Cropland net primary productivity (CNPP) is a crucial indicator of grain productivity and food security. However, assessments of the impact of urban expansion on the CNPP in China have been inadequate owing to data limitations. In this paper, our objective was to assess the impact of urban expansion on the CNPP in China from 1992 to 2015 in a spatially explicit manner. We first obtained the CNPP before urban expansion between 1992 and 2015 in China using the Carnegie-Ames-Stanford Approach (CASA) model. We then assessed the impact of urban expansion on the CNPP from 1992 to 2015 at multiple scales (the whole country, agricultural zones, and urban expansion hotspots) by combining the CNPP before urban expansion with the urban land coverage time series extracted from multi-source remotely sensed data. We found that the total loss of the CNPP due to urban expansion from 1992 to 2015 was 13.77TgC, which accounts for 1.88% of the CNPP before urban expansion in China. This CNPP loss resulted in a 12.45-million-ton decrease in grain production in China, corresponding to a reduction in the mean annual grain self-sufficiency rate of 2%. Therefore, we concluded that rapid urban expansion from 1992 to 2015 caused stress to China's food security. We suggest that it is still vital for China to effectively protect cropland to improve the urbanization level to 60% by 2020. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Analysis of adoption of improved rice production technologies in Jeer local government area of Borno state, Nigeria

    Directory of Open Access Journals (Sweden)

    Mustapha, S.B.

    2013-12-01

    Full Text Available The study analysed adoption of improved rice production technologies in Jere Local Government Area of Borno State, Nigeria. Descriptive statistics such as frequencies and percentages were used to analyse the data. The study revealed that 98.12% of the respondents were male, 57.5% were within 41-50 years and most (33.12% of the respondents had adult education. The study revealed that majority (56.25% of the respondents was aware of the rice production technologies in the study area. Majority of the respondents tried rice production technologies with respect to high yielding varieties (77.50%, early maturing varieties (69.37%, use of weedicides (93.75%, broadcasting method (55.00%, manual harvesting (75.00% and bagging (63.75%. The study revealed that unavailability of fertilizer was the major (96.25% constraint affecting the adoption of rice production technologies by respondents. The study recommends that extension services should be strengthened with necessary inputs for improved adoption of rice production technologies by respondents.

  1. Waste-to-Energy: Hawaii and Guam Energy Improvement Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Davis, J.; Gelman, R.; Tomberlin, G.; Bain, R.

    2014-03-01

    The National Renewable Energy Laboratory (NREL) and the U.S. Navy have worked together to demonstrate new or leading-edge commercial energy technologies whose deployment will support the U.S. Department of Defense (DOD) in meeting its energy efficiency and renewable energy goals while enhancing installation energy security. This is consistent with the 2010 Quadrennial Defense Review report1 that encourages the use of 'military installations as a test bed to demonstrate and create a market for innovative energy efficiency and renewable energy technologies coming out of the private sector and DOD and Department of Energy laboratories,' as well as the July 2010 memorandum of understanding between DOD and the U.S. Department of Energy (DOE) that documents the intent to 'maximize DOD access to DOE technical expertise and assistance through cooperation in the deployment and pilot testing of emerging energy technologies.' As part of this joint initiative, a promising waste-to-energy (WTE) technology was selected for demonstration at the Hickam Commissary aboard the Joint Base Pearl Harbor-Hickam (JBPHH), Hawaii. The WTE technology chosen is called high-energy densification waste-to-energy conversion (HEDWEC). HEDWEC technology is the result of significant U.S. Army investment in the development of WTE technology for forward operating bases.

  2. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  3. THE IMPROVEMENT OF LOW-WASTE TECHNOLOGIES OF WORKING BODY OF WATER PREPARATION AT THERMAL AND NUCLEAR POWER PLANTS

    Directory of Open Access Journals (Sweden)

    K. D. Rymasheuskaya

    2017-01-01

    Full Text Available In the present work the main directions of water desalination technologies improving have been analyzed. Possible techniques of high-quality treatment of water that enable the reduction of amounts of environmentally hazardous substances to be discharged into the hydrosphere are indicated. The purpose of the work was to improve the ecological efficiency and the effectiveness of water treatment equipment at heat power plants when designing new and the modernizing existing water treatment schemes. In order to achieve this goal the following problems have been solved: the one of analyzing the main directions of the improvement of technologies of working body of water preparation at thermal and nuclear power plants; of analyzing the main directions of reduction of total volume of highly mineralized power plant wastewaters; of developing the technological scheme of recycling of concentrate of membrane installations and regenerants of ionite filters in acid and alkali; of developing the technological scheme of transformation of the sludge in pre-processing waste into valuable commodity products. The results of research can be applied for the design of new and the modernization of existing water treatment installations of thermal and nuclear power plants. It will enable to reduce considerably the use of natural water and the amount of chemicals added as well as the volume of wastewater and the concentration of dissolved solids in it. As a consequence, the negative impact of thermal and nuclear power plants on the hydrosphere will be reduced. 

  4. Improving technological pedagogical content knowledge development among pre-service science teachers

    Science.gov (United States)

    Habowski, Thomas A.

    Many teacher education programs provide pre-service teachers with a limited field experience during the professional block semester prior to student teaching. These programs require few hours in the classroom, mainly composed of observations. Many teacher education programs contain a technology-integration methods course that is not subject-specific and mainly focuses on the use of various technologies, in the absence of content and pedagogy. The purpose of this EPP was to examine a Professional Development School (PDS) Program with respect to technology integration among pre-service science teachers. This examination set out to measure differences in pre-service teachers' Technological Pedagogical Content Knowledge (TPACK) before and after the first-semester internship in the program, and utilized various data collection instruments in the process. The primary instrument used was a survey which provided quantitative data for measuring changes in TPACK among the interns throughout the first-semester internship. A set of open-ended questions on the survey provided descriptive details concerning models of TPACK observed and co-taught by the interns. Additionally, a focus group and a PDS conference provided descriptive data concerning observed models of technology, the impact of a subject-specific technology integration course, comparisons between the PDS and traditional teacher education programs, and insight into the comfort and success levels with using technology in the science classroom. The survey responses, the focus group responses, and the PDS conference data all suggested that the increased time requirement, in conjunction with the required technology integration course, and the mentorship provided by a co-teaching model led to exposure to valuable models of technology, an increase in self-assessed TPACK, and a feeling of increased confidence as reported by the interns during the first-semester internship of the PDS Program.

  5. Book Review of Integrating Pedagogy and Technology: Improving Teaching and Learning in Higher Education

    Directory of Open Access Journals (Sweden)

    Jeanna Cronk

    2016-03-01

    Full Text Available Technology applied in university courses must also include pedagogical rationale to be most effective. Likewise, faculty that are only using pedagogy and not including current technology are not fully preparing their students for careers beyond their undergraduate studies. Bernauer and Tomei aim to help college professors become master educators by fully utilizing both technology and pedagogy in unison. To that end, they have created a framework for faculty and an impressive list of tools with pre-identified objectives. The matrix introduced in this book has the potential to serve as an instructor evaluation in higher education.

  6. Metal Foam Analysis: Improving Sandwich Structure Technology for Engine Fan and Propeller Blades

    Science.gov (United States)

    Fedor, Jessica L.

    2004-01-01

    The Life Prediction Branch of the NASA Glenn Research Center is searching for ways to construct aircraft and rotorcraft engine fan and propeller blades that are lighter and less costly. One possible design is to create a sandwich structure composed of two metal faces sheets and a metal foam core. The face sheets would carry the bending loads and the foam core would have to resist the transverse shear loads. Metal foam is ideal because of its low density and energy absorption capabilities, making the structure lighter, yet still stiff. The material chosen for the face sheets and core was 17-4PH stainless steel, which is easy to make and has appealing mechanical properties. This material can be made inexpensively compared to titanium and polymer matrix composites, the two current fan blade alternatives. Initial tests were performed on design models, including vibration and stress analysis. These tests revealed that the design is competitive with existing designs; however, some problems were apparent that must be addressed before it can be implemented in new technology. The foam did not hold up as well as expected under stress. This could be due to a number of issues, but was most likely a result of a large number of pores within the steel that weakened the structure. The brazing between the face sheets and the foam was also identified as a concern. The braze did not hold up well under shear stress causing the foam to break away from the face sheets. My role in this project was to analyze different options for improving the design. I primarily spent my time examining various foam samples, created with different sintering conditions, to see which exhibited the most favorable characteristics for our purpose. Methods of analysis that I employed included examining strut integrity under a microscope, counting the number of cells per inch, measuring the density, testing the microhardness, and testing the strength under compression. Shear testing will also be done to examine

  7. Improving Indigenous Technologies for Sustainable Land Use in Northern Mountainous Areas of Vietnam

    Institute of Scientific and Technical Information of China (English)

    Le Quoc Doanh; Ha Dinh Tuan

    2004-01-01

    More than 30 ethnic groups are now living in northern mountainous regions, Vietnam, mainly relying on shifting cultivation with the fallow period being shortened from time to time. Naturally, soil fertility reduces from cycle to cycle, entailing the reduction of productivity. Large areas of moderately sloping lands suitable for upland agriculture have become bare after many cultivation-fallow cycles. The soils there have been severely degraded with more toxicity, low porosity, low water retention capacity and poor floral diversity. Normally, these lands cannot be used for food crop cultivation. So farmers in uplands have to rely on slash-and-burn practices for their livelihood. As there is no more forest with good soil in medium slopes, farmers go to cut forests in watershed, high slope lands and old forests up to the mountains' top. There are ecologically and environmentally very sensitive areas, so their destruction will inevitably cause hazardous consequences in the whole basin. Meanwhile, cultivation in these areas has low economic efficiency and sustainability because the crop yield may decrease very fast due to severe erosion as the higher the slope, the more serious erosion. Consequently living standards of highland farmers remain low and unstable.Sustainable farming on these lands in the perspective of a seriously deteriorated ecology and environmental is not an easy task. There have beenmany projects trying to help mountainous farmers get out of their vicious circle. However, due to different reasons, the results gained are low, and in some cases, things ceased to move after the projects phased out.During past few years, based on the farmer experiences, the Vietnam Agricultural Science Institute has cooperated with local and international partners to implement different projects in order to solve the problems by developing simple, easy and cheap cultivation technologies, which can be accepted and applied by local poor farmers for sustainable agricultural

  8. Turbulence Analysis Upstream of a Wind Turbine: a LES Approach to Improve Wind LIDAR Technology

    Science.gov (United States)

    Calaf, M.

    2015-12-01

    Traditionally wind turbines learn about the incoming wind conditions by means of a wind vane and a cup anemometer. This approach presents two major limitations: 1) because the measurements are done at the nacelle, behind the rotor blades, the wind observations are perturbed inducing potential missalignement and power losses; 2) no direct information of the incoming turbulence is extracted, limiting the capacity to timely adjust the wind turbine against strong turbulent intensity events. Recent studies have explored the possibility of using wind LIDAR (Light Detection and Ranging) to overcome these limitations (Angelou et al. 2010 and Mikelsen et al., 2013). By installing a wind LIDAR at the nacelle of a wind turbine one can learn about the incoming wind and turbulent conditions ahead of time to timely readjust the turbine settings. Yet several questions remain to be answered such as how far upstream one should measure and what is the appropriate averaging time to extract valuable information. In light of recent results showing the relevance of atmospheric stratification in wind energy applications, it is expected that different averaging times and upstream scanning distances are advised for wind LIDAR measurements. A Large Eddy Simulation (LES) study exploring the use of wind LIDAR technology within a wind farm has been developed. The wind farm consists of an infinite array of horizontal axis wind turbines modeled using the actuator disk with rotation. The model also allows the turbines to dynamically adjust their yaw with the incoming wind vector. The flow is forced with a constant geostrophic wind and a time varying surface temperature reproducing a realistic diurnal cycle. Results will be presented showing the relevance of the averaging time for the different flow characteristics as well as the effect of different upstream scanning distances. While it is observed that within a large wind farm there are no-significant gains in power output by scanning further

  9. Economic analysis of technological innovations to improve sustainability of pangasius production in Vietnam

    NARCIS (Netherlands)

    Ngoc, Pham Thi Anh

    2016-01-01

    In response to increasing concerns about sustainable production, a growing number of European customers expect seafood products to be certified, for example by the Aquaculture Stewardship Council (ASC) certification. Water purification technologies such as Recirculating Aquaculture Systems (RAS) cou

  10. Economic analysis of technological innovations to improve sustainability of pangasius production in Vietnam

    NARCIS (Netherlands)

    Ngoc, Pham Thi Anh

    2016-01-01

    In response to increasing concerns about sustainable production, a growing number of European customers expect seafood products to be certified, for example by the Aquaculture Stewardship Council (ASC) certification. Water purification technologies such as Recirculating Aquaculture Systems (RAS) cou

  11. Improving the management of chronic diseases using web-based technologies: an application in hemophilia care.

    Science.gov (United States)

    Teixeira, Leonor; Saavedra, Vasco; Ferreira, Carlos; Sousa Santos, Beatriz

    2010-01-01

    Modern methods of information and communication that use web technologies provide an opportunity to facilitate closer communication between patients and healthcare providers, allowing a joint management of chronic diseases. This paper describes a web-based technological solution to support the management of inherited bleeding disorders integrating, diffusing and archiving large sets of data relating to the clinical practice of hemophilia care, more specifically the clinical practice at the Hematology Service of Coimbra Hospital Center (a Hemophilia Treatment Center located in Portugal).

  12. Communication in high technology product development projects:project personnel’s viewpoint for improvement

    OpenAIRE

    Väänänen, M. (Mirja)

    2010-01-01

    Abstract Product development plays a crucial role in the survival of high technology companies. High technology product development projects typically are multi-technical, multicultural, geographically dispersed, inter-connected and organized in a network of companies. These settings pose extra challenges for communication. In this qualitative multiple-case study, communication challenges and possible solutions for developing communication were studied. The empirical data were collect...

  13. Health technology assessment in India: the potential for improved healthcare decision-making.

    Science.gov (United States)

    Kumar, Mrityunjai; Ebrahim, Shah; Taylor, Fiona C; Chokshi, Maulik; Gabbay, John

    2014-01-01

    Health technology assessment (HTA) is a multidisciplinary approach that uses clinical effectiveness, cost-effectiveness, policy and ethical perspectives to provide evidence upon which rational decisions on the use of health technologies can be made. It can be used for a single stand-alone technology (e.g. a drug, a device), complex interventions (e.g. a rehabilitation service) and can also be applied to individual patient care and to public health. It is a tool for enabling the assessment and comparison of health technologies using the same metric of cost-effectiveness. This process benefits the patient, the health service, the healthcare payer and the technology producer as only technologies that are considered cost-effective are promoted for widespread use. This leads to greater use of effective technologies and greater health gain. The decision-making process in healthcare in India is complex owing to multiplicity of organizations with overlapping mandates. Often the decision-making is not evidence-based and there is no mechanism of bridging the gap between evidence and policy. Elsewhere, HTA is a frequently used tool in informing policy decisions in both resource-rich and resource-poor countries. Despite national organizations producing large volumes of research and clinical guidelines, India has not yet introduced a formal HTA programme. The incremental growth in healthcare products, services, innovation in affordable medical devices and a move towards universal healthcare, needs to be underpinned with an evidencebase which focuses on effectiveness, safety, affordability and acceptability to maximize the benefits that can be gained with a limited healthcare budget. Establishing HTA as a formal process in India, independent of healthcare providers, funders and technology producers, together with a framework for linking HTA to policy-making, would help ensure that the population gets better access to appropriate healthcare in the future.

  14. Residential Energy Efficiency Demonstration: Hawaii and Guam Energy Improvement Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Earle, L.; Sparn, B.; Rutter, A.; Briggs, D.

    2014-03-01

    In order to meet its energy goals, the Department of Defense (DOD) has partnered with the Department of Energy (DOE) to rapidly demonstrate and deploy cost-effective renewable energy and energy-efficiency technologies. The scope of this project was to demonstrate tools and technologies to reduce energy use in military housing, with particular emphasis on measuring and reducing loads related to consumer electronics (commonly referred to as 'plug loads'), hot water, and whole-house cooling.

  15. Improving GPR Surveys Productivity by Array Technology and Fully Automated Processing

    Science.gov (United States)

    Morello, Marco; Ercoli, Emanuele; Mazzucchelli, Paolo; Cottino, Edoardo

    2016-04-01

    The realization of network infrastructures with lower environmental impact and the tendency to use digging technologies less invasive in terms of time and space of road occupation and restoration play a key-role in the development of communication networks. However, pre-existing buried utilities must be detected and located in the subsurface, to exploit the high productivity of modern digging apparatus. According to SUE quality level B+ both position and depth of subsurface utilities must be accurately estimated, demanding for 3D GPR surveys. In fact, the advantages of 3D GPR acquisitions (obtained either by multiple 2D recordings or by an antenna array) versus 2D acquisitions are well-known. Nonetheless, the amount of acquired data for such 3D acquisitions does not usually allow to complete processing and interpretation directly in field and in real-time, thus limiting the overall efficiency of the GPR acquisition. As an example, the "low impact mini-trench "technique (addressed in ITU - International Telecommunication Union - L.83 recommendation) requires that non-destructive mapping of buried services enhances its productivity to match the improvements of new digging equipment. Nowadays multi-antenna and multi-pass GPR acquisitions demand for new processing techniques that can obtain high quality subsurface images, taking full advantage of 3D data: the development of a fully automated and real-time 3D GPR processing system plays a key-role in overall optical network deployment profitability. Furthermore, currently available computing power suggests the feasibility of processing schemes that incorporate better focusing algorithms. A novel processing scheme, whose goal is the automated processing and detection of buried targets that can be applied in real-time to 3D GPR array systems, has been developed and fruitfully tested with two different GPR arrays (16 antennas, 900 MHz central frequency, and 34 antennas, 600 MHz central frequency). The proposed processing

  16. Technology and geomorphology: Are improvements in data collection techniques transforming geomorphic science?

    Science.gov (United States)

    Viles, Heather

    2016-10-01

    In recent years technological developments have revolutionized our ability to collect data in geomorphology. Enhanced data collection not only enables us to provide deeper answers to a wider range of fundamental questions about the Earth's surface, but also encourages us to pose new questions. This paper considers in more detail the relationships between science, technology and the development of geomorphological tools and techniques, reviews the spectrum of tools and techniques now available to geomorphologists, and critically assesses what impact 'new technologies' are having on geomorphology. It focuses on the role of technology in biogeomorphology and weathering research, and how it is advancing theoretical, empirical and applied dimensions of these growing sub-fields of geomorphology. Five areas of important technological development are reviewed: remote sensing, dating, geophysical techniques, field and laboratory based analysis and sensing of physical and chemical characteristics, and field and laboratory based analysis of biological properties. There is good evidence that, taken together, technological developments are revolutionizing geomorphology through opening the doors to better cross-scalar investigations, blurring the boundaries between laboratory, field and computer model, and facilitating cross-disciplinary and democratized research.

  17. IMPROVING THREE-DIMENSIONAL OBJECT VISUALIZATION USER INTERFACE WITH AUGMENTED REALITY TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Kravtsov �. M.

    2014-06-01

    Full Text Available The article describes hardware and software specific issues of implementing augmented reality for improving user interface of visualization of a virtual object. It also defines possible future improvements of the subject

  18. Research on video target tracking technology based on improved SIFT algorithm

    Science.gov (United States)

    Zhuang, Zhemin; Guo, Zhijie; Yuang, Ye

    2017-01-01

    A novel target tracking algorithm based on improved SIFT (Scale Invariant Feature Transform (SIFT) algorithm is proposed in this paper. In order to improve real-time performance, the processing neighborhood of SIFT has been improved to decrease the complexity of calculation, and the dimension of the SIFT vector is set from 128 to 40. Simulations and experiments show this improved algorithm brings us low computation complexity and high tracking accuracy and robustness.

  19. Can commonly-used fan-driven air cleaning technologies improve indoor air quality? A literature review

    DEFF Research Database (Denmark)

    Zhang, Yinping; Mo, Jinhan; Li, Yuguo

    2011-01-01

    Air cleaning techniques have been applied worldwide with the goal of improving indoor air quality. The effectiveness of applying these techniques varies widely, and pollutant removal efficiency is usually determined in controlled laboratory environments which may not be realized in practice. Some...... air cleaners are largely ineffective, and some produce harmful by-products. To summarize what is known regarding the effectiveness of fan-driven air cleaning technologies, a state-of-the-art review of the scientific literature was undertaken by a multidisciplinary panel of experts from Europe, North...... technologies was able to effectively remove all indoor pollutants and many were found to generate undesirable by-products during operation. (2) Particle filtration and sorption of gaseous pollutants were among the most effective air cleaning technologies, but there is insufficient information regarding long...

  20. Par-baked Bread Technology: Formulation and Process Studies to Improve Quality.

    Science.gov (United States)

    Almeida, Eveline Lopes; Steel, Caroline Joy; Chang, Yoon Kil

    2016-01-01

    Extending the shelf-life of bakery products has been an important requirement resulting from the mechanization of this industry and the need to increase the distance for the distribution of final products, caused by the increase in production and consumer demand. Technologies based on the interruption of the breadmaking process represent an alternative to overcome product staling and microbiological deterioration. The production of par-baked breads is one of these technologies. It consists of baking the bread in two stages, and due to the possibility of retarding the second stage, it can be said that the bread can always be offered fresh to the consumer. The technology inserts logistics as part of the production process and creates the "hot point" concept, these being the locations where the bread is finalized, such as in the consumers' homes or sales locations. In this work, a review of the papers published on this subject was carried out, and aspects related to both the formulation and the process were considered. This technology still faces a few challenges, such as solving bread quality problems that appear due to process modifications, and these will also be considered. The market for these breads has grown rapidly and the bakery industry searches innovations related to par-baked bread technology.

  1. Integration of improved decontamination and characterization technologies in the decommissioning of the CP-5 research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharyya, S. K.; Boing, L. E.

    2000-02-17

    The aging of research reactors worldwide has resulted in a heightened awareness in the international technical decommissioning community of the timeliness to review and address the needs of these research institutes in planning for and eventually performing the decommissioning of these facilities. By using the reactors already undergoing decommissioning as test beds for evaluating enhanced or new/innovative technologies for decommissioning, it is possible that new techniques could be made available for those future research reactor decommissioning projects. Potentially, the new technologies will result in: reduced radiation doses to the work force, larger safety margins in performing decommissioning and cost and schedule savings to the research institutes in performing the decommissioning of these facilities. Testing of these enhanced technologies for decontamination, dismantling, characterization, remote operations and worker protection are critical to furthering advancements in the technical specialty of decommissioning. Furthermore, regulatory acceptance and routine utilization for future research reactor decommissioning will be assured by testing and developing these technologies in realistically contaminated environments prior to use in the research reactors. The decommissioning of the CP-5 Research Reactor is currently in the final phase of dismantlement. In this paper the authors present results of work performed at Argonne National Laboratory (ANL) in the development, testing and deployment of innovative and/or enhanced technologies for the decommissioning of research reactors.

  2. The effectiveness of M-health technologies for improving health and health services: a systematic review protocol

    Directory of Open Access Journals (Sweden)

    Patel Vikram

    2010-10-01

    Full Text Available Abstract Background The application of mobile computing and communication technology is rapidly expanding in the fields of health care and public health. This systematic review will summarise the evidence for the effectiveness of mobile technology interventions for improving health and health service outcomes (M-health around the world. Findings To be included in the review interventions must aim to improve or promote health or health service use and quality, employing any mobile computing and communication technology. This includes: (1 interventions designed to improve diagnosis, investigation, treatment, monitoring and management of disease; (2 interventions to deliver treatment or disease management programmes to patients, health promotion interventions, and interventions designed to improve treatment compliance; and (3 interventions to improve health care processes e.g. appointment attendance, result notification, vaccination reminders. A comprehensive, electronic search strategy will be used to identify controlled studies, published since 1990, and indexed in MEDLINE, EMBASE, PsycINFO, Global Health, Web of Science, the Cochrane Library, or the UK NHS Health Technology Assessment database. The search strategy will include terms (and synonyms for the following mobile electronic devices (MEDs and a range of compatible media: mobile phone; personal digital assistant (PDA; handheld computer (e.g. tablet PC; PDA phone (e.g. BlackBerry, Palm Pilot; Smartphone; enterprise digital assistant; portable media player (i.e. MP3 or MP4 player; handheld video game console. No terms for health or health service outcomes will be included, to ensure that all applications of mobile technology in public health and health services are identified. Bibliographies of primary studies and review articles meeting the inclusion criteria will be searched manually to identify further eligible studies. Data on objective and self-reported outcomes and study quality will

  3. The role of information and communication technologies in improving teaching and learning processes in primary and secondary schools

    Directory of Open Access Journals (Sweden)

    Albert Sangrà

    2010-12-01

    Full Text Available The purpose of this study is to analyse what is happening at schools regarding the integration and use of information and communication technologies (ICT and to examine teachers' perceptions about what teaching and learning processes can be improved through the use of ICT. A multiple-case-study research methodology was applied. From a previous exploratory research, four different types of schools were determined. Data show there is a widespread view that ICT in teaching favours several teaching and learning processes. In particular, it shows that the contribution of ICT to the improvement of teaching and learning processes is higher in the schools that have integrated ICT as an innovation factor. To attain this highest level implies that a school not only has to modernise the technological tools, but also has to change the teaching models: the teacher's role, issues regarding classroom organisational, the teaching and learning processes, and the interaction mechanisms.

  4. Emissions reductions as a result of automobile improvement.

    Science.gov (United States)

    Pokharel, Sajal S; Bishop, Gary A; Stedman, Donald H; Slott, Robert

    2003-11-15

    Remote sensing of light duty vehicle on-road tailpipe exhaust has been used to measure on-road mass emissions of automobile fleets in Denver for 13 years and in two other U.S. cities for 5 years. Analysis of these fleets shows that newer automobiles, during a period of fairly constant new car standards, have become continually less polluting independent of measurement location. Improving emissions control technology spurred by federal regulations is thought to have brought about these trends.

  5. Contracts for field projects and supporting research on enhanced oil recovery and improved drilling technology. Progress review No. 34, quarter ending March 31, 1983

    Energy Technology Data Exchange (ETDEWEB)

    Linville, B. (ed.)

    1983-07-01

    Progress achieved for the quarter ending March 1983 are presented for field projects and supporting research for the following: chemical flooding; carbon dioxide injection; and thermal/heavy oil. In addition, progress reports are presented for: resource assessment technology; extraction technology; environmental and safety; microbial enhanced oil recovery; oil recovered by gravity mining; improved drilling technology; and general supporting research. (ATT)

  6. Reducing Plug Loads in Office Spaces: Hawaii and Guam Energy Improvement Technology Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Sheppy, M.; Metzger, I.; Cutler, D.; Holland, G.; Hanada, A.

    2014-01-01

    As part of its overall strategy to meet its energy goals, the Naval Facilities Engineering Command (NAVFAC) partnered with the Department of Energy's National Renewable Energy Laboratory (NREL) to rapidly demonstrate and deploy cost-effective renewable energy and energy efficiency technologies. This project was one of several demonstrations of new or underutilized commercial energy technologies. The common goal was to demonstrate and measure the performance and economic benefit of the system while monitoring any ancillary impacts to related standards of service and operation and maintenance (O&M) practices. In short, demonstrations at naval facilities simultaneously evaluate the benefits and compatibility of the technology with the U.S. Department of Defense (DOD) mission, and with NAVFAC's design, construction, operations, and maintenance practices, in particular. This project demonstrated the performance of commercially available advanced power strips (APSs) for plug load energy reductions in building A4 at Joint Base Pearl Harbor-Hickam (JBPHH), Hawaii.

  7. IMPROVING LANGUAGE DISORDERS IN THE CASE OF CHILDREN THROUGH THE USE OF MULTIPLATFORM TECHNOLOGY WITH ROMANIAN APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Georgeta PÂNIȘOARĂ

    2016-12-01

    Full Text Available The role of communication skills of a child is essential because it is closely related to normal child development (cognitive, emotional, motivational considered major instruments for participation and involvement in all daily social activities, family , group of friends and school environment. From this perspective, we consider necessary to carry out a program of recovery therapy through computer technology access and use of video games as positive indicators for correcting and improving language through highly motivational role instruments.

  8. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  9. Improving Business Intelligence Applications by Using New Generation of Web and Mobile Technologies

    Directory of Open Access Journals (Sweden)

    Mihaela-Laura IVAN

    2015-01-01

    Full Text Available The current paper presents an overview about the combination of the new technologies like: SAP HANA, SAP UI5 and SAP Fiori. There are presented the many advantages of which the final user can benefit, such as: fast performance when querying a request, data modelled with the last database innovation of SAP, SAP HANA database, which brings the biggest feature which is in-memory processing. This in-memory computing of SAP HANA enables people to focus on innovation. In the third section are described two examples of web and mobile applications developed with these technologies.

  10. Improvement on Performances of Internal Combustion Engine Using the Technology of Ceramic Coating

    Institute of Scientific and Technical Information of China (English)

    林建生; 付晓光; 张建昭

    2003-01-01

    This paper introduces a new technology of using ceramic coating on piston rings of an internal combustion engine, and the comparison of mechanical efficiency and performances of an actual engine before and after the application of ceramic coating on the piston rings. The experimental results show that the mechanical efficiency and power output are enhanced by 4% and 2.6%, respectively, with fuel consumption reduced by 2.9%. Further studies on coating processing and coating materials as well as the reliability and durability will be of great significance in the application and popularization of the new technology.

  11. IMPROVING THE QUALITY OF THE INFORMATION PRESENTED IN FINANCIAL STATEMENTS BY USING INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    VASILE DUMITRAȘ

    2011-01-01

    Full Text Available Information technology can contribute significantly to business efficiency, including also enterprise governance, through appropriate and effective use. In most cases, it is difficult to determine which technologies are relevant to business needs and the use of appropriate options is not always clear. The development of information society, characterized by integration and automatization of processes and controls, by increased operational security of systems but also increasing dependence on them, and accompanied also by increased requirements of correct and operative information creates the need for new approaches of procedures and financial systems architectures.

  12. ORGANIZATIONAL CULTURE AS CUSTOMER-ORIENTED TECHNOLOGY TO IMPROVE THE COMPETITIVENESS OF THE UNIVERSITY

    Directory of Open Access Journals (Sweden)

    I. A. Demenenko

    2017-01-01

    Full Text Available The article discusses the features of formation and development of organizational culture of the University as customer-centric technology. The phenomenon of organizational culture is an essential resource for improving the competitiveness of the University, innovative development, indicators of international and research activities of the University. Stream organizational culture external (students, parents, employers and internal (students, faculty, University administration, staff/employees customers of the University determines the integration of elements of organizational culture of University in business environment of enterprises, through the involvement of graduates in professional environment. Organizational culture plays a very active role in the governance of higher education institution. At the present level of development of the market of educational services with the introduction of the national project of modernization of the education system organizational culture becomes a significant part of the formation of the University as an economic entity. It is a powerful factor in increasing the attractiveness of higher education institutions for potential consumers of educational and other services, as well as his staff. Organizational culture affects each student during his adaptation and socialization, psychological growth and learning at the University. Organizational culture and, after graduation, is in a symbiotic relationship with the employee as the object of professional activity. Potential employee during the period of study at the University “consumes” the historically established values of the University, participates in the established and developing its traditions, abides by the norms and rules of behavior, adapts to the society through various kinds of symbolism of the University, etc. In turn, the organizational culture of the University, as a basis for the development and socialization of a young man, becoming an

  13. Using improved technology for widespread application of a geological carbon sequestration study

    Science.gov (United States)

    Raney, J.

    2013-12-01

    The Kansas Geological Survey is part of an ongoing collaboration between DOE-NETL, academia, and the petroleum industry to investigate the feasibility of carbon utilization and storage in Kansas. Latest findings in the 25,000 mi2 study area in southern Kansas estimate CO2 storage capacity ranges from 8.8 to 75.5 billion metric tons in a deep Lower Orodovican-age Arbuckle saline aquifer. In addition, an estimated 100 million tonnes of CO2 could be used for extracting additional oil from Kansas' fields, making transitions to carbon management economic. This partnership has a rare opportunity to synchronize abundant, yet previously disseminated knowledge into a cohesive scientific process to optimize sequestration site selection and implementation strategies. Following a thorough characterization, a small-scale CO2 injection of 70,000 tonnes will be implemented in Wellington Field in Sumner County, including a five-plot miscible CO2-EOR flood of a Mississippian reservoir followed by the underlying Arbuckle saline aquifer. Best practices and lessons learned from the field study will improve estimates on CO2 storage capacity, plume migration models, and identify potential leakage pathways to pursue safe and effective geological carbon sequestration at commercial scales. A highly accessible and multifunctional online database is being developed throughout the study that integrates all acquired geological, physical, chemical, and hydrogeologic knowledge. This public database incorporates tens of thousands of data points into easily viewable formats for user downloads. An Interactive Project Map Viewer is a key mechanism to present the scientific research, and will delineate compartment candidates and reservoirs matching reference criteria or user defined attributes. This tool uses a familiar pan and zoom interface to filter regional project data or scale down to detailed digitized information from over 3,300 carefully selected preexisting Kansas wells. A Java-based log

  14. Improving livestock for agriculture - technological progress from random transgenesis to precision genome editing heralds a new era.

    Science.gov (United States)

    Laible, Götz; Wei, Jingwei; Wagner, Stefan

    2015-01-01

    Humans have a long history in shaping the genetic makeup of livestock to optimize production and meet growing human demands for food and other animal products. Until recently, this has only been possible through traditional breeding and selection, which is a painstakingly slow process of accumulating incremental gains over a long period. The development of transgenic livestock technology offers a more direct approach with the possibility for making genetic improvements with greater impact and within a single generation. However, initially the technology was hampered by technical difficulties and limitations, which have now largely been overcome by progressive improvements over the past 30 years. Particularly, the advent of genome editing in combination with homologous recombination has added a new level of efficiency and precision that holds much promise for the genetic improvement of livestock using the increasing knowledge of the phenotypic impact of genetic sequence variants. So far not a single line of transgenic livestock has gained approval for commercialization. The step change to genome-edited livestock with precise sequence changes may accelerate the path to market, provided applications of this new technology for agriculture can deliver, in addition to economic incentives for producers, also compelling benefits for animals, consumers, and the environment.

  15. Simulating future wheat yield under climate change, carbon dioxide enrichment and technology improvement in Iran. Case study: Azarbaijan region

    Energy Technology Data Exchange (ETDEWEB)

    Mansouri, H.; Raei, Y.; Zaeim, A.N.

    2015-07-01

    Climate change and technology development can affect crop productivity in future conditions. Precise estimation of crops yield change as affected by climate and technology in the future is an effective approach for management strategies. The aim of this study was to estimate the impacts of climate change, technology improvement, CO2 enrichment, and overall impacts on wheat yield under future conditions. Wheat yield was projected for three future time periods (2020, 2050 and 2080) compared to baseline year (2011) under two scenarios of IPCC Special Report on Emission Scenarios (SRES) including SRES-A2 as regional economic scenario and SRES-B1 as global environmental scenario in Azarbaijan region (NW of Iran). A linear regression model, describing the relationship between wheat yield and historical year, was developed to investigate technology development effect. The decision support system for agro-technology transfer (DSSAT4.5) was used to evaluate the influence of climate change on wheat yield. The most positive effects were found for wheat yield as affected by technology in all studied regions. Under future climate change, the SRES projected a decrease in yield, especially in West Azarbaijan region. When the effects of elevated CO2 were considered, all regions resulted to increase in wheat yield. Considering all components effect in comparison with baseline (2011), yield increase would range from 5% to 38% across all times, scenarios and regions. According to our findings, it seems that we may expect a higher yield of wheat in NW Iran in the future if technology development continues as well as past years. (Author)

  16. Considerations on the modifications brought to disciplinary liability by the Laws no. 40/2011 and 62/2011

    Directory of Open Access Journals (Sweden)

    Radu Ştefan PĂTRU

    2011-12-01

    Full Text Available Law no. 40/2011 modifying and supplementing the Labour Code and the Law on Social Dialogue no. 62/2011 have significantly modified the legislative framework regulating the labour conditions. Starting from this year, the architecture of the labour law fundamental institutions has been subjected to changes that would materialize in new approach directions both for employers and employees as well as for the law courts that will have to interpret the new legal dispositions in an equitable manner. Among the essential amendments brought to the abovementioned law, we will focus on those related to the modifications and applicability of employees' disciplinary liability.

  17. Changes Brought by Reflection

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    Feng: A number of changes have taken place in Europe after reflection, such as specific anti-terrorist measures, progress in the construction of integration, changes in the structure of political forces and adjustments in the EU foreign policy. Would you make some comments first, Dr. Sun?

  18. Using Digital Technologies to Improve the Authenticity of Performance Assessment for High-Stakes Purposes

    Science.gov (United States)

    Newhouse, C. Paul

    2015-01-01

    This paper reports on the outcomes of a three-year study investigating the use of digital technologies to increase the authenticity of high-stakes summative assessment in four Western Australian senior secondary courses. The study involved 82 teachers and 1015 students and a range of digital forms of assessment using computer-based exams, digital…

  19. Social Media in School Emergency Management: Using New Media Technology to Improve Emergency Management Communications

    Science.gov (United States)

    Stephens, Kim

    2011-01-01

    Social Media is the use of social networking sites, messaging sites, texting, and other web-based or mobile technologies to support social interaction. Facebook is by far the most widely used social networking site. Twitter is by far the most widely used messaging site. The goals of this presentation are: (1) To provide an understanding of the…

  20. Improved recovery of ammonia from swine manure using gas-permeable membrane technology and aeration

    Science.gov (United States)

    Significant efforts are required to abate ammonia emissions from livestock operations. In addition, the costs of fertilizers have rapidly increased in recent years, especially nitrogen fertilizer such as anhydrous ammonia which is made from natural gas. Thus, new technologies for abatement of ammoni...

  1. Using Educational Technology as an Institutional Teaching and Learning Improvement Strategy?

    Science.gov (United States)

    Stoddart, Patrick

    2015-01-01

    Increasingly, educational technology is identified as crucial to addressing many scale issues around higher education learning and teaching. However, such projects are often run with the technical project goals achieved but the educational goals unrealised. Further, in an age of austerity, all investments must be closely scrutinised as to their…

  2. Improving the Quality and Cost of Healthcare Delivery: The Potential of Radio Frequency Identification (RFID) Technology

    Science.gov (United States)

    Vilamovska, Anna-Marie

    2010-01-01

    The study investigated whether an upcoming class of health information technology (HIT) can be used to address currently outstanding issues in the quality and cost of healthcare delivery. Expert interviews and a literature review were used to describe the 2009 universe of in- and outpatient healthcare RFID applications and to identify those…

  3. Information Technology Investment: Agencies Can Improve Performance, Reduce Costs, and Minimize Risks.

    Science.gov (United States)

    2007-11-02

    strengthened management of three fundamental assets: personnel, knowledge and information, and capital property/fixed assets. Investments in information ... technology (IT) can have a dramatic impact on all three of these assets. However, an IT project’s impact comes from how the investment is selected, designed

  4. Ethics and the Marketing of Technology for Training and Performance Improvement: A Commentary

    Science.gov (United States)

    Carliner, Saul

    2003-01-01

    This commentary is intended to start a conversation on ethical behavior in the marketing of our work, with a special focus on the issues that arise when marketing technology and related services. The general literature on marketing ethics suggests that marketers have more relaxed ethical values than the general public. Therefore, ethics should be…

  5. Why First Movers May Fail: Global Versus Sequential Improvement of Complex Technological Artefacts

    NARCIS (Netherlands)

    Querbes, A.; Frenken, K.

    2012-01-01

    We propose a new theory of late mover advantage where new entrants can leapfrog incumbents through introducing new functionality of an existing technology. Since first mover firms did not take into account new functionalities discovered after they entered, they limited their search on older function

  6. How Software Technologies Can Improve Research on Learning and Bolster School Reform

    Science.gov (United States)

    Winne, Philip H.

    2006-01-01

    Realizing the promise of software technologies in education requires thinking differently about how software simultaneously can serve research and contribute to learning. This article examines 3 axioms underlying contemporary educational psychology: Learners construct knowledge, learners are agents, and data include lots of randomness. By drawing…

  7. Improving the Quality and Cost of Healthcare Delivery: The Potential of Radio Frequency Identification (RFID) Technology

    Science.gov (United States)

    Vilamovska, Anna-Marie

    2010-01-01

    The study investigated whether an upcoming class of health information technology (HIT) can be used to address currently outstanding issues in the quality and cost of healthcare delivery. Expert interviews and a literature review were used to describe the 2009 universe of in- and outpatient healthcare RFID applications and to identify those…

  8. Ex-ante environmental assessments of novel technologies - Improved caprolactam catalysis and hydrogen storage

    NARCIS (Netherlands)

    Roes, A.L.|info:eu-repo/dai/nl/303022388; Patel, M.K.|info:eu-repo/dai/nl/18988097X

    2011-01-01

    Utrecht University has conducted a pilot sustainability assessment for the executive board of the chemistry program ACTS (Advanced Chemical Technologies for Sustainability) of the Netherlands’ Organization for Scientific Research (NWO). These assessments represent prospective, i.e. ’ex-ante’ studies

  9. Improving new technology venture performance under direct and indirect network externality conditions

    NARCIS (Netherlands)

    Podoynitsyna, Ksenia; Song, Michael; van der Bij, Hans; Weggeman, Mathieu

    2013-01-01

    This study compares the effectiveness of five responses to external uncertainty in markets with network externalities: avoidance, imitation, control, cooperation, and real options reasoning as a form of strategic flexibility. Our analysis of 385 new technology ventures shows that direct and indirect

  10. Adoption of Mobile Technology for Teaching Preparation in Improving Teaching Quality of Teachers

    Directory of Open Access Journals (Sweden)

    Aliff Nawi

    2015-07-01

    Full Text Available This study aims to identify the readiness of teachers to use mobile phones for the purpose of teaching preparation. The study also reviewed the level of teachers’ satisfaction when using the mobile technology applications developed for the purpose of teaching and learning in the classroom. This study used the mix method to collect data. A total of 31 teachers were involved in answering the questionnaire and seven teachers were interviewed to obtain supportive data. The findings show that the use of applications on mobile phones can help teachers smoothen the lesson preparation. In addition, the use of mobile technology also gives satisfaction to the teachers in enhancing their knowledge in the field of teaching. However, the technical aspects are still a priority and influence the usability aspects of an educational application. The study also revealed that the end users’ age factor is important because it affects the frequency and usage of mobile technology in developing their skills. In conclusion, the use of mobile technology among teachers is appropriate and facilitates the teaching activities.

  11. DEFENSE SCIENCE AND TECHNOLOGY Adopting Best Practices Can Improve Innovation Investments and Management

    Science.gov (United States)

    2017-06-01

    approach to organizing and executing their technology development activities by grouping them into two portfolios: incremental and disruptive, as shown in...for product development . Disruptive R&D is often sponsored by a corporate research organization , which makes project investment decisions... development investments. To develop these plans, companies solicit ideas and information from people across the organization to determine the

  12. Beyond the Classroom: How Technology Can Improve Your District's Management and Operating Systems.

    Science.gov (United States)

    Pereus, Steven C.

    2001-01-01

    Certain guiding principles ensure that information technology becomes a value-added investment: using well-designed management and operating processes and fact-based decision making; examining document core processes and business practices; rethinking and redesigning processes, policies, and practices before integrating them into a system; and…

  13. Adoption of Mobile Technology for Teaching Preparation in Improving Teaching Quality of Teachers

    Science.gov (United States)

    Nawi, Aliff; Hamzah, Mohd Isa; Ren, Chua Chy; Tamuri, Ab Halim

    2015-01-01

    This study aims to identify the readiness of teachers to use mobile phones for the purpose of teaching preparation. The study also reviewed the level of teachers' satisfaction when using the mobile technology applications developed for the purpose of teaching and learning in the classroom. This study used the mix method to collect data. A total of…

  14. Improving sustainability of striped catfish (Pangasianodon hypophthalmus) farming in the Mekong Delta, Vietnam through recirculation technology

    NARCIS (Netherlands)

    Nguyen, Nhut

    2016-01-01

    The aim of this thesis was to document improvements in sustainability indicators of striped catfish (Pangasianodon hypophthalmus, Sauvage, 1878) production through the application of recirculation and waste treatment techniques. To be able to document improvements in sustainability, in each system s

  15. [Improving of underground work technology at mining facilities and problems of industrial hygiene].

    Science.gov (United States)

    Kaptsov, V A; Chebotarev, A G

    1993-10-01

    Mechanization of underground works in mines has induced increased air content of dust and gas, a rise in noise and vibration, microclimate deterioration. The prevalence of occupational pulmonary diseases in mines has increased. Further efforts to improved the situation should be aimed at improvement of requirements to hygienic characteristics of the equipment, setting up of adequate conditioning and health protection measures.

  16. Report of the Task Force for Improved Coordination of the DoD Science and Technology Program. Volume 1. Summary Report and Recommendations

    Science.gov (United States)

    1988-08-01

    always balanced sheer Soviet nimerical advantages and thereby added to deterrence." 3 The Technological Gap Between the United States and the Soviet...effective way to improve productivity. D. ADVOCACY 1. Need to View S&T Program Costs as a Corporate Investment The narrowing of the technological gap between...that have been set. 11-8 E. SUMMARY OF FINDINGS 1. Erosion of Technological Leadership * The technological gap between US and Soviet military forces has

  17. NFORMATION TECHNOLOGIES IN INTEGRATED LOGISTICS

    National Research Council Canada - National Science Library

    Karolina S Prokopovic; Tijana B Prokopovic; Miloje A Jelic

    2016-01-01

      The rapid development of the Internet and the use of new possibilities which the digital technologies have brought about, have made significant changes in all the areas of business, including logistics...

  18. A new automatic alignment technology for single mode fiber-waveguide based on improved genetic algorithm

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yu; CHEN Zhuang-zhuang; LI Ya-juan; DUAN Jian

    2009-01-01

    A novel automatic alignment algorithm of single mode fiber-waveguide based on improved genetic algorithm is proposed. The genetic searching is based on the dynamic crossover operator and the adaptive mutation operator to solve the premature convergence of simple genetic algorithm The improved genetic algorithm combines with hill-climbing method and pattern searching algorithm, to solve low precision of simple genetic algorithm in later searching. The simulation results indicate that the improved genetic algorithm can rise the alignment precision and reach the coupling loss of 0.01 dB when platform moves near 207 space points averagely.

  19. IMPROVEMENT OF THE CONTENT OF DISCIPLINE "ORGANIZATINAL INFORMATICS" USING NETWORKING TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Tetiana Ya. Vdovychyn

    2016-01-01

    Full Text Available A relevant task of informatics bachelor education is to form and develop knowledge and professional skills in the context of their future profession as "Specialist in Information Technologies." Discipline "Organizational Informatics" is a basic course for bachelors in computer science. The course combines the fundamental concepts and methods, supports interdisciplinary communication throughout the process of students’ learning. This article focuses on highlighting peculiarities of "Organizational Informatics" course for students of the first (bachelor level of higher education in field of "Informatics *" study using open education network technologies in Drohobych State Pedagogical University named after Ivan Franko. In the article there is stated the purpose and objectives of this discipline, analyzed the content of lectures, laboratory works, practical tasks, independent students’ activity. The knowledge and skills which future professionals must master after studying "Organizational Informatics" are described.

  20. Effectiveness of educational technology to improve patient care in pharmacy curricula.

    Science.gov (United States)

    Smith, Michael A; Benedict, Neal

    2015-02-17

    A review of the literature on the effectiveness of educational technologies to teach patient care skills to pharmacy students was conducted. Nineteen articles met inclusion criteria for the review. Seven of the articles included computer-aided instruction, 4 utilized human-patient simulation, 1 used both computer-aided instruction and human-patient simulation, and 7 utilized virtual patients. Educational technology was employed with more than 2700 students at 12 colleges and schools of pharmacy in courses including pharmacotherapeutics, skills and patient care laboratories, drug diversion, and advanced pharmacy practice experience (APPE) orientation. Students who learned by means of human-patient simulation and virtual patients reported enjoying the learning activity, whereas the results with computer-aided instruction were mixed. Moreover, the effect on learning was significant in the human-patient simulation and virtual patient studies, while conflicting data emerged on the effectiveness of computer-aided instruction.