WorldWideScience

Sample records for technological challenges presented

  1. Technological Skills and New Professional Profiles: Present Challenges for Journalism

    OpenAIRE

    López-García, Xosé; Rodríguez-Vázquez, Ana-Isabel; Pereira-Fariña, Xosé

    2017-01-01

    The paper aims at understanding the intersections between technology and the professional practices in some of the new trends in journalism that are using the new tools: multimedia journalism, immersive journal-ism and data journalism. The great dilemma facing journalism when training new professionals -especially the youngest- is not anymore the training in new technologies anymore. The main concern lies in taking ad-vantage of their skills to create a new computational model while keeping t...

  2. Technological Skills and New Professional Profiles: Present Challenges for Journalism

    Science.gov (United States)

    López-García, Xosé; Rodríguez-Vázquez, Ana-Isabel; Pereira-Fariña, Xosé

    2017-01-01

    The paper aims at understanding the intersections between technology and the professional practices in some of the new trends in journalism that are using the new tools: multimedia journalism, immersive journalism, and data journalism. The great dilemma facing journalism when training new professionals--especially the youngest--is not the training…

  3. Investigating the Learning Challenges Presented by Digital Technologies to the College of Education in Kuwait University

    Science.gov (United States)

    Aldhafeeri, Fayiz; Male, Trevor

    2016-01-01

    There is now widespread recognition that digital technologies, particularly portable hand held devices capable of Internet connection, present opportunities and challenges to the way in which student learning is organized in schools, colleges and institutions of higher education in the 21st Century. Traxler, "Journal of the Research Centre…

  4. Present status and future challenges of nuclear forensics technology developments in JAEA

    International Nuclear Information System (INIS)

    Kimura, Yoshiki; Shinohara, Nobuo; Okubo, Ayako; Toda, Nobufumi; Funatake, Yoshio; Kataoka, Osamu; Matsumoto, Tetsuya; Watahiki, Masaru; Kuno, Yusuke

    2014-01-01

    Japan Atomic Energy Agency (JAEA) has started a nuclear forensics (NF) technology development project from JFY 2011, according to the National Statement of Japan in Nuclear Security Summit 2010. This paper will present the progress and future prospects of the development project during JFY 2011 to 2013. The project on NF technology in JAEA includes the development of analytical technologies such as isotope and impurity measurements, morphology analysis, age determination technique, and the prototype of nuclear forensics library (NFL) for future national NFL. Some analytical devices were installed for the analytical technology developments, and various uranium materials produced in JAEA facilities at Ningyo-toge have been measured to verify the analytical technologies. A nuclear material database of the prototype NFL was also developed with brief tools of multivariate analysis and image analysis. The implementation of the analytical technologies, the development of advanced analytical technologies and the system improvements of the prototype NFL will be continued from JFY 2014 in JAEA. The national regime and national response plan are remained as a big challenge to establish the national NF capabilities in Japan. (author)

  5. Present challenges in hadrontherapy techniques

    Science.gov (United States)

    Amaldi, U.; Braccini, S.

    2011-07-01

    Hadrontherapy is a high-precision technique in cancer radiation therapy, which allows obtaining a superior conformal treatment with respect to photons used in conventional radiation therapy. To reach this ambitious goal without reducing the patient throughput needed in a hospital-based environment, the physical and radiobiological properties of charged hadrons, protons and carbon ions in particular, have to be exploited at best, making use of the most modern technologies issued from research in nuclear and particle physics. In the present days, we are assisting to a continuous technological challenge, leading to the conception and to the development of innovative methods and instruments. In this paper, the most relevant challenges in dose delivery systems, gantries, imaging, quality assurance and particle accelerators are reviewed.

  6. Addressing Ethics and Technology in Business: Preparing Today's Students for the Ethical Challenges Presented by Technology in the Workplace

    Science.gov (United States)

    Brooks, Rochelle

    2008-01-01

    The ethical development of information systems is but one of those sensitive scenarios associated with computer technology that has a tremendous impact on individuals and social life. The significance of these issues of concern cannot be overstated. However, since computer ethics is meant to be everybody's responsibility, the result can often be…

  7. Proceeding of the Fourth Scientific Presentation on Nuclear Fuel Cycle: Technology of Nuclear Fuel Cycle facing the Challenge of Energy Need on the 21-st Century

    International Nuclear Information System (INIS)

    Suripto, A.; Sajuti, D.; Aiman, S.; Yuwono, I.; Fathurrachman; Suwarno, H.; Suwardi; Amini, S.; Widjaksana

    1999-03-01

    The proceeding contains papers presented in the Fourth Scientific Presentation on Nuclear Fuel Element Cycle with theme of Technology of Nuclear Fuel Cycle facing the Challenge of Energy Need on the 21 s t Century, held on 1-2 December in Jakarta, Indonesia. These papers were divided by three groups that are technology of exploration, processing, purification and analysis of nuclear materials; technology of nuclear fuel elements and structures; and technology of waste management, safety and management of nuclear fuel cycle. There are 36 papers indexed individually. (ID)

  8. Technology Empowerment: Security Challenges.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Drake Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Backus, George A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Wendell [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nelson, Thomas R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Skocypec, Russell D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-03-01

    Technology empowerment” means that innovation is increasingly accessible to ordinary people of limited means. As powerful technologies become more affordable and accessible, and as people are increasingly connected around the world, ordinary people are empowered to participate in the process of innovation and share the fruits of collaborative innovation. This annotated briefing describes technology empowerment and focuses on how empowerment may create challenges to U.S. national security. U.S. defense research as a share of global innovation has dwindled in recent years. With technology empowerment, the role of U.S. defense research is likely to shrink even further while technology empowerment will continue to increase the speed of innovation. To avoid falling too far behind potential technology threats to U.S. national security, U.S. national security institutions will need to adopt many of the tools of technology empowerment.

  9. Global Trends and Research Aims for English Academic Oral Presentations: Changes, Challenges, and Opportunities for Learning Technology

    Science.gov (United States)

    Barrett, Neil E.; Liu, Gi-Zen

    2016-01-01

    English has become the de facto language for communication in academia in many parts of the world, but English language learners often lack the language resources to make effective oral academic presentations. However, English for academic purposes (EAP) research is beginning to provide valuable insights into this emerging field. This literature…

  10. The Development of a Code of Ethics: An Online Classroom Approach to Making Connections between Ethical Foundations and the Challenges Presented by Information Technology

    Science.gov (United States)

    Brooks, Rochelle

    2010-01-01

    In today's organizations, ethical challenges relate to areas like fraud, right to privacy for consumers, social responsibility, and trade restrictions. For Information Technology (IT) specifically, these can translate to considerations on how technology is used to violate people's privacy, how automation leads to job reductions, or how management…

  11. Photonic quantum technologies (Presentation Recording)

    Science.gov (United States)

    O'Brien, Jeremy L.

    2015-09-01

    The impact of quantum technology will be profound and far-reaching: secure communication networks for consumers, corporations and government; precision sensors for biomedical technology and environmental monitoring; quantum simulators for the design of new materials, pharmaceuticals and clean energy devices; and ultra-powerful quantum computers for addressing otherwise impossibly large datasets for machine learning and artificial intelligence applications. However, engineering quantum systems and controlling them is an immense technological challenge: they are inherently fragile; and information extracted from a quantum system necessarily disturbs the system itself. Of the various approaches to quantum technologies, photons are particularly appealing for their low-noise properties and ease of manipulation at the single qubit level. We have developed an integrated waveguide approach to photonic quantum circuits for high performance, miniaturization and scalability. We will described our latest progress in generating, manipulating and interacting single photons in waveguide circuits on silicon chips.

  12. The ITER project technological challenges

    CERN Multimedia

    CERN. Geneva; Lister, Joseph; Marquina, Miguel A; Todesco, Ezio

    2005-01-01

    The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the designer approach and the available technologies are critically discussed. The fourth lecture is devoted to the issue of performance prediction, from a superconducting wire to a large size conductor. The role of scaling laws, self-field, current distribution, voltage-current characteristic and transposition are...

  13. Technological challenges of CLIC

    CERN Multimedia

    CERN. Geneva; Döbert, Steffen; Arnau-Izquierdo, G; Redaelli, Stefano; Mainaud, Helène; Lefèvre, Thibaut

    2006-01-01

    Future e+e- Linear Colliders offer the potential to explore new physics at the TeV scale and beyond to very high precision. While the International Linear Collider (ILC) scheme of a collider in the 0.5 - 1 TeV range enters the engineering design phase, the Compact Linear Collider (CLIC) study explores the technical feasibility of a collider capable of reaching into the multi-TeV energy domain. Key ingredients of the CLIC scheme are acceleration at high-frequency (30 GHz) and high-gradient (150 MV/m) in normal conducting structures and the use of the so-called Two Beam Acceleration concept, where a high-charge electron beam (drive beam) running parallel to the main beam is decelerated to provide the RF power to accelerate the main beam itself. A vigorous R&D effort is presently developed by the CLIC international collaboration to demonstrate its feasibility by 2010, when the first physics results from LHC should be available to guide the choice of the centre-of-mass energy better suited to explore the futu...

  14. LHC an unprecedented technological challenge

    International Nuclear Information System (INIS)

    Baruch, J.O.

    2002-01-01

    This article presents the future LHC (large hadron collider) in simple terms and gives some details concerning radiation detectors and supra-conducting magnets. LHC will take the place of the LEP inside the 27 km long underground tunnel near Geneva and is scheduled to operate in 2007. 8 years after its official launching the LHC project has piled up 2 year delay and has exceeded its initial budget (2 milliard euros) by 18%. Technological challenges and design difficulties are the main causes of these shifts. The first challenge has been carried out successfully, it was the complete clearing out of the LEP installation. In order to release 14 TeV in each proton-proton collision, powerful magnetic fields (8,33 Tesla) are necessary. 1248 supra-conducting 15 m-long bipolar magnets have to be built. 30% of the worldwide production of niobium-titanium wires will be used each year for 5 years in the design of these coils. The global cryogenic system will be gigantic and will use 94 tons of helium. 4 radiation detectors are being built: ATLAS (a toroidal LHC apparatus), CMS (compact muon solenoid), ALICE (a large ion collider experiment) and LHC-b (large hadron collider beauty). The 2 first will search after the Higgs boson, ALICE will be dedicated to the study of the quark-gluon plasma and LHC-b will gather data on the imbalance between matter and anti-matter. (A.C.)

  15. RFID Technologies : emerging issues and challenges

    NARCIS (Netherlands)

    Lieshout, M.J. van; Kool, L.

    2007-01-01

    In this paper we will present the results of a technology and policy assessment we have performed on emerging issues and policy challenges of RFID technologies. RFID is a basic component of the future internet of things. A balanced view on opportunities and threats, on drivers and barriers is needed

  16. Folklore in China: Past, Present, and Challenges

    Directory of Open Access Journals (Sweden)

    Juwen Zhang

    2018-04-01

    Full Text Available This article first outlines the long history of folklore collection in China, and then describes the disciplinary development in the 20th century. In Section 3, it presents the current situation in terms of disciplinary infrastructure, development, contribution, and challenge, with a focus on the recent practice of safeguarding Intangible Cultural Heritage. These accounts are largely based on the views of the Chinese folklorists. In the final section, this article discusses the issues of cultural continuity, integration, and self-healing mechanisms in Chinese culture by putting Chinese folkloristics in a historical and world perspective. This paper suggests that, to understand Chinese folklore and culture, one must be aware of the most basic differences between Chinese fundamental beliefs and values and those of the West, and that Chinese folklore and folkloristics present new challenges to the current paradigms put forward in the post-colonial, post-modern, and imperial ideologies.

  17. HEP technologies to address medical imaging challenges

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Developments in detector technologies aimed at solving challenges in present and future CERN experiments, particularly at the LHC, have triggered exceptional advances in the performance of medical imaging devices, allowing for a spectacular progress in in-vivo molecular imaging procedures, which are opening the way for tailored therapies of major diseases. This talk will briefly review the recent history of this prime example of technology transfer from HEP experiments to society, will describe the technical challenges being addressed by some ongoing projects, and will present a few new ideas for further developments and their foreseeable impact.

  18. 2016 Annual Technology Baseline (ATB) - Webinar Presentation

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Wesley; Kurup, Parthiv; Hand, Maureen; Feldman, David; Sigrin, Benjamin; Lantz, Eric; Stehly, Tyler; Augustine, Chad; Turchi, Craig; Porro, Gian; O' Connor, Patrick; Waldoch, Connor

    2016-09-13

    This deck was presented for the 2016 Annual Technology Baseline Webinar. The presentation describes the Annual Technology Baseline, which is a compilation of current and future cost and performance data for electricity generation technologies.

  19. Space exploration - Present and future challenges

    CERN Multimedia

    CERN. Geneva

    2003-01-01

    Our future deep-space exploration faces many daunting challenges, but three of them loom high above the rest: physiological debilitation, radiation sickness and psychological stress. Many measures are presently being developed to reduce these difficulties. However, in the long run, two important new developments are required: abundant supply of power, and advanced space propulsion. The future looks bright, however. While the road is a long one, it is now well defined and many exciting explorations are within near-term reach.BiographyDr. Chang-Diaz graduated from MIT in the field of applied plasma physics and fusion research. He has been a NASA space shuttle astronaut on seven missions between 1986 and 2002. As director of the ASP Laboratory in Houston, he continues research on plasma rockets.For more details: see www.jsc.nasa.gov/Bios/htmlbios/chang.htmlNote: Tea and coffee will be served at 16:00 hrs.

  20. Present and future SDHW technology

    DEFF Research Database (Denmark)

    Furbo, Simon

    1998-01-01

    A state of the art for the technology of pumped SDHW systems is given. The potential advantages by utilizing the relatively new low flow principle are described. Experience from laboratory tests of SDHW systems and from measurements on SDHW systems in practice are summarized. The conclusion...... is that the solar tank is the most important component for small SDHW systems from a thermal performance point of view and in many countries also from an economic point of view and that the design of marketed SDHW systems can be strongly improved. Finally, recommendations for future development work on SDHW systems...

  1. A challenge in future transportation research and planning: paper presented at the Conference "Energy Technologies for a Sustainable Future", Paul Scherrer Institute, Villigen, 24.11.2000

    OpenAIRE

    Keller, Peter

    2000-01-01

    To understand the future challenge for transportation research and planning, we must make a clear distinction between “mobility” and “transportation”. Mobility is understood to be the ca- pability or possibility of changing position within a specific system (space, society, economy, etc.). On the other hand “transportation” is “spatial mobility”, that is the capability or possibility of changing position within a spatial system (change of location, overcoming of space by peo- ple, goods, ener...

  2. Quantum technology past, present, future: quantum energetics (Conference Presentation)

    Science.gov (United States)

    Choi, Sang H.

    2017-04-01

    Since the development of quantum physics in the early part of the 1900s, this field of study has made remarkable contributions to our civilization. Some of these advances include lasers, light-emitting diodes (LED), sensors, spectroscopy, quantum dots, quantum gravity and quantum entanglements. In 1998, the NASA Langley Research Center established a quantum technology committee to monitor the progress in this area and initiated research to determine the potential of quantum technology for future NASA missions. The areas of interest in quantum technology at NASA included fundamental quantum-optics materials associated with quantum dots and quantum wells, device-oriented photonic crystals, smart optics, quantum conductors, quantum information and computing, teleportation theorem, and quantum energetics. A brief review of the work performed, the progress made in advancing these technologies, and the potential NASA applications of quantum technology will be presented.

  3. Strengthened safeguards: Present and future challenges

    International Nuclear Information System (INIS)

    Goldschmidt, Pierre

    2001-01-01

    Full text: The safeguards system is experiencing what has been seen as a revolution and, in doing so, it is confronting a series of challenges. These can be grouped into three areas. Drawing and maintaining safeguards conclusions - The process by which the safeguards conclusions are derived is based upon the analysis, evaluation and review of all the information available to the Agency. This process is on- going, but the State Evaluation Reports are compiled and reviewed periodically. For States with an additional protocol in force, the absence of indicators of the presence of undeclared nuclear material or activities provides the basis for the safeguards conclusion. Future challenges center on States' expectations of, and reactions to, the results of the evaluation and review process. Designing and implementing integrated safeguards - The conceptual framework of integrated safeguards is being actively pursued. Basic principles have been defined and integrated safeguards approaches have been developed for various types of facilities. Work is also progressing on the design of integrated safeguards approaches for specific States. Complementary access is being successfully implemented, and procedures for the use of unannounced inspections are being developed with the prospect of cost- effectiveness gains. Costs neutrality vs. quality and credibility - The Department faces serious staff and financial challenges. It has succeeded so far in 'doing more' and 'doing better' within a zero-real growth budget, but the scope for further significant efficiency gains is exhausted. There is no capacity to absorb new or unexpected tasks. Difficulties in recruiting and retaining qualified and experienced staff exacerbate the problems and add to costs. The Director General of the IAEA has referred to the need for new initiatives to bridge the budgetary gap; a possible measure is proposed. The tasks of meeting the challenges and demands of strengthened safeguards have been added to

  4. Present status of foreign reprocessing technology

    International Nuclear Information System (INIS)

    Otagaki, Takao; Ishikawa, Yasusi; Mori, Jyunichi

    2000-03-01

    In considering extensively and evaluating advanced nuclear fuel recycle technologies then selecting credible one among those technology options and establishing practicable plan of future fast reactor fuel recycle technology, it is important to investigate foreign reprocessing information extensively and minutely as much as possible then to know trends of reprocessing technology development in the world and present technology level of each country. This report is intending to present information of the status and the technology of operating, constructing and closed foreign reprocessing facilities in the world, including, mixed oxide (MOX) fuel reprocessing technology. The conceptual study of 'Foreign Reprocessing Technology Database' was also performed in order to add or revise the information easily. The eight countries, France, The U.K., Russia, The U.S., Germany, Belgium, India and China, were studied regarding outline of the facilities, operation status, future plan, technical information of process flow sheet, primary components, maintenance system etc, construction and operating costs, accidents or troubles, decommissioning status. (author)

  5. Fuzzy technology present applications and future challenges

    CERN Document Server

    Fedrizzi, Mario; Kacprzyk, Janusz

    2016-01-01

    This book provides readers with a timely and comprehensive yet concise view on the field of fuzzy logic and its real-world applications. The chapters, written by authoritative scholars in the field, report on promising new models for data analysis, decision making, and systems modeling, with a special emphasis on their applications in management science. The book is a token of appreciation from the fuzzy research community to Professor Christer Carlsson for his long time research and organizational commitment, which have among other things resulted in the foundation and success of the Institute for Advanced Management Systems Research (IAMSR) at Åbo Akademi University, in Åbo (Turku), Finland. The book serves as timely guide for the fuzzy logic and operations research communities alike. .

  6. Trauma networks: present and future challenges

    Directory of Open Access Journals (Sweden)

    Kanakaris Nikolaos K

    2011-11-01

    Full Text Available Abstract In England, trauma is the leading cause of death across all age groups, with over 16,000 deaths per year. Major trauma implies the presence of multiple, serious injuries that could result in death or serious disability. Successive reports have documented the fact that the current ad hoc unstructured management of this patient group is associated with considerable avoidable death and disability. The reform of trauma care in England, especially of the severely injured patient, has already begun. Strong clinical leadership is embraced as the way forward. The present article summarises the steps that have been made over the last decade that led to the recent decision to move towards a long anticipated restructure of the National Health Service (NHS trauma services with the introduction of Regional Trauma Networks (RTNs. While, for the first time, a genuine political will and support exists, the changes required to maintain the momentum for the implementation of the RTNs needs to be marshalled against arguments, myths and perceptions from the past. Such an approach may reverse the disinterest attitude of many, and will gradually evolve into a cultural shift of the public, clinicians and policymakers in the fullness of time.

  7. A review of smart homes- present state and future challenges.

    Science.gov (United States)

    Chan, Marie; Estève, Daniel; Escriba, Christophe; Campo, Eric

    2008-07-01

    In the era of information technology, the elderly and disabled can be monitored with numerous intelligent devices. Sensors can be implanted into their home for continuous mobility assistance and non-obtrusive disease prevention. Modern sensor-embedded houses, or smart houses, cannot only assist people with reduced physical functions but help resolve the social isolation they face. They are capable of providing assistance without limiting or disturbing the resident's daily routine, giving him or her greater comfort, pleasure, and well-being. This article presents an international selection of leading smart home projects, as well as the associated technologies of wearable/implantable monitoring systems and assistive robotics. The latter are often designed as components of the larger smart home environment. The paper will conclude by discussing future challenges of the domain.

  8. Applying Technology To Facilitate Poster Presentations.

    Science.gov (United States)

    Marek, Pam; Christopher, Andrew N.; Koenig, Cynthia S.

    2002-01-01

    Promotes the use of presentation software in psychology courses to teach students technological skills that prepare them for the future. Explains that many graduates in psychology are employed in other fields after graduation. Discusses the use of presentation software with a focus on poster preparation using Microsoft PowerPoint software. (CMK)

  9. Technological challenges for the LHC

    CERN Multimedia

    CERN. Geneva; Rossi, Lucio; Lebrun, Philippe; Bordry, Frederick; Mess, Karl Hubert; Schmidt, Rüdiger

    2003-01-01

    For the LHC to provide particle physics with proton-proton collisions at the centre of mass energy of 14 TeV with a luminosity of 1034 cm-2s-1, the machine will operate with high-field dipole magnets using NbTi superconductors cooled to below the lambda point of helium. In order to reach design performance, the LHC requires both, the use of existing technologies pushed to the limits as well as the application of novel technologies. The construction follows a decade of intensive R&D and technical validation of major collider sub-systems. The first lecture will focus on the required LHC performance, and on the implications on the technologies. In the following lectures several examples for LHC technologies will be discussed: the superconducting magnets to deflect and focus the beams, the cryogenics to cool the magnets to a temperature below the lambda point of helium along most of the LHC circumference, the powering system supplying about 7000 magnets connected in 1700 electrical circuits with a total curr...

  10. Dosimetry challenges for implementing emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Yin Fangfang; Oldham, Mark; Cai Jing; Wu Qiuwen, E-mail: Fangfang.yin@duke.ed [Department of Radiation Oncology Duke University Medical Center, Durham, NC 27516 (United States)

    2010-11-01

    During the last 10 years, radiation therapy technologies have gone through major changes, mainly related introduction of sophisticated delivery and imaging techniques to improve the target localization accuracy and dose conformity. While implementation of these emerging technologies such as image-guided SRS/SBRT, IMRT/IMAT, IGRT, 4D motion management, and special delivery technologies showed substantial clinical gains for patient care, many other factors, such as training/quality, efficiency/efficacy, and cost/effectiveness etc. remain to be challenging. This talk will address technical challenges for dosimetry verification of implementing these emerging technologies in radiation therapy.

  11. Fermentation: an age old technology with brand new challenges

    CSIR Research Space (South Africa)

    Van Zyl, PJ

    2006-04-01

    Full Text Available The presentation is based on the new challenges facing an age old technology of fermentation. These challenges were presented at the SASM Conference, the conclusion been that the future of fermentation is only limited by our imagination. Nonetheless...

  12. Technological challenges in thermal plasma production

    International Nuclear Information System (INIS)

    Ramakrishnan, S.

    1995-01-01

    Thermal plasmas, generated by electric arc discharges, are used in a variety of industrial applications. The electric arc is a constricted electrical discharge with a high temperature in the range 6000-25,000 K. These characteristics are useful in plasma cutting, spraying, welding and specific areas of material processing. The thermal plasma technology is an enabling process technology and its status in the market depends upon its advantages over competing technologies. A few technological challenges to enhance the status of plasma technology are to improve the utilisation of the unique characteristics of the electric arc and to provide enhanced control of the process. In particular, new solutions are required for increasing the plasma-material interaction, controlling the electrode roots and controlling the thermal power generated by the arcing process. In this paper, the advantages of plasma technology, its constraints and future challenges for technology developments are highlighted. 36 refs., 14 figs

  13. Technological challenges for manganese nodule mining

    Digital Repository Service at National Institute of Oceanography (India)

    Sharma, R.

    The major technological challenges of deep-sea mining venture involve delineation of mine site and development of mining technology to bring out the minerals from extreme conditions (more than 5 km water depth, 0-3 degrees C temperature and 500 bars...

  14. Technology in Art Therapy: Ethical Challenges

    Science.gov (United States)

    Alders, Amanda; Beck, Liz; Allen, Pat B.; Mosinski, Barbara

    2011-01-01

    As technology advances, art therapy practices are adapting to the demands of a new cultural climate. Art therapists face a number of ethical challenges as they interact with increasingly diverse populations and employ new media. This article addresses some of the ethical and professional issues related to the use of technology in clinical…

  15. Technological Challenges to X-Ray FELs

    Energy Technology Data Exchange (ETDEWEB)

    Nuhn, Heinz-Dieter

    1999-09-16

    There is strong interest in the development of x-ray free electron lasers (x-ray FELs). The interest is driven by the scientific opportunities provided by intense, coherent x-rays. An x-ray FEL has all the characteristics of a fourth-generation source: brightness several orders of magnitude greater than presently achieved in third-generation sources, full transverse coherence, and sub-picosecond long pulses. The SLAC and DESY laboratories have presented detailed design studies for X-Ray FEL user facilities around the 0.1 nm wavelength-regime (LCLS at SLAC, TESLA X-Ray FEL at DESY). Both laboratories are engaged in proof-of-principle experiments are longer wavelengths (TTF FEL Phase I at 71 nm, VISA at 600-800 nm) with results expected in 1999. The technologies needed to achieve the proposed performances are those of bright electron sources, of acceleration systems capable of preserving the brightness of the source, and of undulators capable of meeting the magnetic and mechanical tolerances that are required for operation in the SASE mode. This paper discusses the technological challenges presented by the X-Ray FEL projects.

  16. 2017 Technology Showcase Presentations | NCI Technology Transfer Center | TTC

    Science.gov (United States)

    Presentations from the 2017 Technology Showcase by NIH Intramural Research Program scientists held at Frederick National Laboratories for Cancer Research on June 7, 2017. | [google6f4cd5334ac394ab.html

  17. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne, CH and P. BRUZZONE / CRPP-EPFL, Zürich, CH The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the...

  18. Academic Training: The ITER project: technological challenges

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 31 May, 1, 2, 3, June from 11:00 to 12:00 on 31 May and 2, 3, June. From 10:00 to 12:00 on 1 June - Main Auditorium, bldg. 500 The ITER project: technological challenges J. LISTER / CRPP-EPFL, Lausanne and P. BRUZZONE / CRPP-EPFL, Zürich The first lecture reminds us of the ITER challenges, presents hard engineering problems, typically due to mechanical forces and thermal loads and identifies where the physics uncertainties play a significant role in the engineering requirements. The second lecture presents soft engineering problems of measuring the plasma parameters, feedback control of the plasma and handling the physics data flow and slow controls data flow from a large experiment like ITER. The last three lectures focus on superconductors for fusion. The third lecture reviews the design criteria and manufacturing methods for 6 milestone-conductors of large fusion devices (T-7, T-15, Tore Supra, LHD, W-7X, ITER). The evolution of the de...

  19. Complex plasmas scientific challenges and technological opportunities

    CERN Document Server

    Lopez, Jose; Becker, Kurt; Thomsen, Hauke

    2014-01-01

    This book provides the reader with an introduction to the physics of complex plasmas, a discussion of the specific scientific and technical challenges they present, and an overview of their potential technological applications. Complex plasmas differ from conventional high-temperature plasmas in several ways: they may contain additional species, including nanometer- to micrometer-sized particles, negative ions, molecules and radicals, and they may exhibit strong correlations or quantum effects. This book introduces the classical and quantum mechanical approaches used to describe and simulate complex plasmas. It also covers some key experimental techniques used in the analysis of these plasmas, including calorimetric probe methods, IR absorption techniques and X-ray absorption spectroscopy. The final part of the book reviews the emerging applications of microcavity and microchannel plasmas, the synthesis and assembly of nanomaterials through plasma electrochemistry, the large-scale generation of ozone using mi...

  20. A sensitive technology for a sensitive challenge

    Directory of Open Access Journals (Sweden)

    Audrey Dodo

    2012-05-01

    Full Text Available This paper deals with technology and its applications for an ageing population. It aims at discussing the issues raised by such a relationship and highlights healthcare-related designs. It questions the notion of product acceptance and points out some challenges that need to be met by designers and engineers. The overall experience provided by owning and using a product must be designed in a holistic way, placing the human, his or her needs and feelings, as central guiding factors. These issues are further explained with the presentation of a design project made by Audrey Dodo and Teresa Georgallis, within the frame of a competition at the Royal College of Art in London: a self-monitoring health service, a toothbrush that assesses the user’s health state through his or her mobile phone.

  1. Bringing solutions to big challenges. Energy - climate - technology (ECT)

    International Nuclear Information System (INIS)

    2008-01-01

    The conference contains 45 presentations within the sections integrated policy and strategic perspectives on energy, climate change and technology, energy efficiency with prospects and measures, climate change and challenges for offshore energy and technology, possibilities for technology utilization, nuclear technology developments including some papers on thorium utilization, ethics of energy resource use and climate change, challenges and possibilities for the Western Norway and sustainability and security in an ECT-context. Some economic aspects are discussed as well. 16 of the 45 papers have been indexed for the database (tk)

  2. Challenges in industrial fermentation technology research

    DEFF Research Database (Denmark)

    Formenti, Luca Riccardo; Nørregaard, Anders; Bolic, Andrijana

    2014-01-01

    Industrial fermentation processes are increasingly popular, and are considered an important technological asset for reducing our dependence on chemicals and products produced from fossil fuels. However, despite their increasing popularity, fermentation processes have not yet reached the same...... engineering challenges: scaling up and scaling down fermentation processes, the influence of morphology on broth rheology and mass transfer, and establishing novel sensors to measure and control insightful process parameters. The greatest emphasis is on the challenges posed by filamentous fungi, because...

  3. Challenges and Solutions When Using Technologies in the Classroom

    Science.gov (United States)

    Johnson, Amy M.; Jacovina, Matthew E.; Russell, Devin G.; Soto, Christian M.

    2016-01-01

    The purpose of this chapter is to present common challenges faced by educators when attempting to integrate technology in the classroom, and offer potential solutions to those problems. Examination of these issues should be valuable to current and future educators, school administrators, as well as educational technology researchers. The chapter…

  4. Mobile Computing and Ubiquitous Networking: Concepts, Technologies and Challenges.

    Science.gov (United States)

    Pierre, Samuel

    2001-01-01

    Analyzes concepts, technologies and challenges related to mobile computing and networking. Defines basic concepts of cellular systems. Describes the evolution of wireless technologies that constitute the foundations of mobile computing and ubiquitous networking. Presents characterization and issues of mobile computing. Analyzes economical and…

  5. Confronting new technological challenges in HEP

    International Nuclear Information System (INIS)

    Savoy-Navarro, Aurore

    2000-01-01

    The new technological challenges that will have to be confronted in HEP are mainly due to the new physics issues. What is beyond the standard model? That is the question. This review will first list the physics demands in order to explore this unknown world. It will then show with appropriate examples, how the new physics will require confronting new technological challenges in: designing new accelerators, developing new detectors, designing new front-end readout systems and using the new software and hardware tools for the online readout and DAQ systems

  6. Human resource management and technological challenges

    CERN Document Server

    Davim, J

    2014-01-01

    This book focuses on the challenges and changes that new technologies bring to human resources (HR) of modern organizations. It examines the technological implications of the last changes taking place and how they affect the management and motivation of human resources belonging to these organizations. It looks for ways to understand and perceive how organizational HR, individually and as a team, conceptualize, invent, adapt, define and use organizational technology, as well as how they are constrained by features of it. The book provides discussion and the exchange of information on principles, strategies, models, techniques, methodologies and applications of human resources management and technological challenges and changes in the field of industry, commerce and services.

  7. APPLYING SIMPLE TECHNOLOGY ACCOMPLISHES VISUAL INSPECTION CHALLENGES

    International Nuclear Information System (INIS)

    Robinson, C

    2007-01-01

    This paper discusses the successful implementation of simple video technologies at the Savannah River Site (SRS) to perform complex visual inspection, monitoring, and surveillance tasks. Because SRS facilities are similar to those of an industrial plant, the environmental and accessibility considerations for remote viewing are the primary determining factors in the selection of technology. The constraints and challenges associated with remote viewing are discussed, and examples of applications are given

  8. Presentation: Overview of Water Reuse Challenges and Opportunities

    Science.gov (United States)

    This presentation, Overview of Water Reuse Challenges and Opportunities, was given at the STAR Human and Ecological Health Impacts Associated with Water Reuse and Conservation Practices Kick-off Meeting and Webinar held on Oct. 26-27, 2016.

  9. Ethical challenges with welfare technology: a review of the literature.

    Science.gov (United States)

    Hofmann, Bjørn

    2013-06-01

    Demographical changes in high income counties will increase the need of health care services but reduce the number of people to provide them. Welfare technology is launched as an important measure to meet this challenge. As with all types of technologies we must explore its ethical challenges. A literature review reveals that welfare technology is a generic term for a heterogeneous group of technologies and there are few studies documenting their efficacy, effectiveness and efficiency. Many kinds of welfare technology break with the traditional organization of health care. It introduces technology in new areas, such as in private homes, and it provides new functions, e.g. offering social stimuli and entertainment. At the same time welfare technology is developed for groups that traditionally have not been extensive technology users. This raises a series of ethical questions with regard to the development and use of welfare technologies, which are presented in this review. The main challenges identified are: (1) Alienation when advanced technology is used at home, (2) conflicting goals, as welfare technologies have many stakeholders with several ends, (3) respecting confidentiality and privacy when third-party actors are involved, (4) guaranteeing equal access and just distribution, and (5) handling conflicts between instrumental rationality and care in terms of respecting dignity and vulnerability. Addressing these issues is important for developing and implementing welfare technologies in a morally acceptable manner.

  10. Developmental Challenges of SMES Technology for Applications

    Science.gov (United States)

    Rong, Charles C.; Barnes, Paul N.

    2017-12-01

    This paper reviews the current status of high temperature superconductor (HTS) based superconducting magnetic energy storage (SMES) technology as a developmental effort. Discussion centres on the major challenges in magnet optimization, loss reduction, cooling improvement, and new development of quench detection. The cryogenic operation for superconductivity in this technological application requires continued research and development, especially with a greater engineering effort that involves the end user. For the SMES-based technology to more fully mature, some suggestions are given for consideration and discussion.

  11. Challenges in Teaching Modern Manufacturing Technologies

    Science.gov (United States)

    Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

    2015-01-01

    Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in…

  12. Technological and engineering challenges of fusion

    International Nuclear Information System (INIS)

    Maisonnier, David; Hayward, Jim

    2008-01-01

    The current fusion development scenario in Europe assumes the sequential achievement of key milestones. Firstly, the qualification of the DEMO/reactor physics basis in ITER, secondly, the qualification of materials for in-vessel components in IFMIF and, thirdly, the qualification of components and processes in DEMO. Although this scenario is constrained by budgetary considerations, it assumes the resolution of many challenges in physics, technology and engineering. In the first part of the paper, the technological and engineering challenges to be met in order to satisfy the current development scenario will be highlighted. These challenges will be met by an appropriate share of the work between ITER, IFMIF, DEMO and the necessary accompanying programme, which will have to include a number of dedicated facilities (e.g. for the development of H and CD systems). In the second part of the paper, the consequences of a considerable acceleration of the fusion development programme will be discussed. Although most of the technological and engineering challenges identified above will have to be met within a shorter timescale, it is possible to limit the requirements and expectation for a first fusion power plant with respect to those adopted for the current fusion development scenario. However, it must be recognised that such a strategy will inevitably result in increased risk and a reduction in the economy of the plant. (author)

  13. Proceeding of the Fourth Scientific Presentation on Nuclear Fuel Cycle: Technology of Nuclear Fuel Cycle facing the Challenge of Energy Need on the 21-st Century; Prosiding presentasi ilmiah daur bahan bakar nuklir IV. Tema: teknologi daur bahan bakar nuklir menghadapi tantangan kebutuhan ketenagaan pada abad-21

    Energy Technology Data Exchange (ETDEWEB)

    Suripto, A [National Atomic Energy Agency, Serpong (Indonesia); Sajuti, D [Research and Development Center for Calibration Instrumentation and Metrology, Indonesian Institute of Sciences, Serpong (Indonesia); Aiman, S [Research and Development Center for Applied Chemistry, Indonesian Institute of Sciences, Serpong (Indonesia); Yuwono, I [National Atomic Energy Agency, Serpong (Indonesia); Fathurrachman, [National Atomic Energy Agency, Serpong (Indonesia); Suwarno, H [National Atomic Energy Agency, Serpong (Indonesia); Suwardi, [National Atomic Energy Agency, Serpong (Indonesia); Amini, S [National Atomic Energy Agency, Serpong (Indonesia); Widjaksana, [National Atomic Energy Agency, Serpong (Indonesia)

    1999-03-01

    The proceeding contains papers presented in the Fourth Scientific Presentation on Nuclear Fuel Element Cycle with theme of Technology of Nuclear Fuel Cycle facing the Challenge of Energy Need on the 21{sup s}t Century, held on 1-2 December in Jakarta, Indonesia. These papers were divided by three groups that are technology of exploration, processing, purification and analysis of nuclear materials; technology of nuclear fuel elements and structures; and technology of waste management, safety and management of nuclear fuel cycle. There are 36 papers indexed individually. (ID)

  14. Challenge Based Innovation @ mediterranean - final presentations & prototype expo

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Challenge Based Innovation @ mediterranean - Final presentations & prototype expo Challenge Based Innovation (CBI) is a six-month project course, where multidisciplinary student teams and their instructors collaborate with researchers at CERN to discover novel solutions for the future of humankind. The projects are an elaborate mixture, where societal, human-driven needs meet research at CERN. More info about CBI from the course website, cbi-course.com The Gala on 10.12. will introduce the proof-of concept prototypes the four student teams have developed to answer a wide range of societal challenges, inspired by people and research at CERN.   Dress code: a suit / dress  is not required - come as you are! Register for live attendance & CERN access for external visitors. Webcast and/or recorded presentations will be available here in the Indico page for anyone interested.  The space is limited to 50 participants, so act quickly! &...

  15. Technology in Parkinson disease: Challenges and Opportunities

    Science.gov (United States)

    Espay, Alberto J.; Bonato, Paolo; Nahab, Fatta; Maetzler, Walter; Dean, John M.; Klucken, Jochen; Eskofier, Bjoern M.; Merola, Aristide; Horak, Fay; Lang, Anthony E.; Reilmann, Ralf; Giuffrida, Joe; Nieuwboer, Alice; Horne, Malcolm; Little, Max A.; Litvan, Irene; Simuni, Tanya; Dorsey, E. Ray; Burack, Michelle A.; Kubota, Ken; Kamondi, Anita; Godinho, Catarina; Daneault, Jean-Francois; Mitsi, Georgia; Krinke, Lothar; Hausdorff, Jeffery M.; Bloem, Bastiaan R.; Papapetropoulos, Spyros

    2016-01-01

    The miniaturization, sophistication, proliferation, and accessibility of technologies are enabling the capturing of more and previously inaccessible phenomena in Parkinson disease (PD). However, more information has not translated into greater understanding of disease complexity to satisfy diagnostic and therapeutic needs. Challenges include non-compatible technology platforms, the need for wide-scale and long-term deployment of sensor technology (in particular among vulnerable elderly patients), and the gap between the “big data” acquired with sensitive measurement technologies and their limited clinical application. Major opportunities could be realized if new technologies are developed as part of open-source and/or open-hardware platforms enabling multi-channel data capture, sensitive to the broad range of motor and non-motor problems that characterize PD, and adaptable into self-adjusting, individualized treatment delivery systems. The International Parkinson and Movement Disorders Society Task Force on Technology is entrusted to convene engineers, clinicians, researchers, and patients to promote the development of integrated measurement and closed-loop therapeutic systems with high patient adherence that also serve to: 1) encourage the adoption of clinico-pathophysiologic phenotyping and early detection of critical disease milestones; 2) enhance tailoring of symptomatic therapy; 3) improve subgroup targeting of patients for future testing of disease modifying treatments; and 4) identify objective biomarkers to improve longitudinal tracking of impairments in clinical care and research. This article summarizes the work carried out by the Task Force toward identifying challenges and opportunities in the development of technologies with potential for improving the clinical management and quality of life of individuals with PD. PMID:27125836

  16. Carbon capture and storage as a corporate technology strategy challenge

    International Nuclear Information System (INIS)

    Bowen, Frances

    2011-01-01

    Latest estimates suggest that widespread deployment of carbon capture and storage (CCS) could account for up to one-fifth of the needed global reduction in CO 2 emissions by 2050. Governments are attempting to stimulate investments in CCS technology both directly through subsidizing demonstration projects, and indirectly through developing price incentives in carbon markets. Yet, corporate decision-makers are finding CCS investments challenging. Common explanations for delay in corporate CCS investments include operational concerns such as the high cost of capture technologies, technological uncertainties in integrated CCS systems and underdeveloped regulatory and liability regimes. In this paper, we place corporate CCS adoption decisions within a technology strategy perspective. We diagnose four underlying characteristics of the strategic CCS technology adoption decision that present unusual challenges for decision-makers: such investments are precautionary, sustaining, cumulative and situated. Understanding CCS as a corporate technology strategy challenge can help us move beyond the usual list of operational barriers to CCS and make public policy recommendations to help overcome them. - Research highlights: → Presents a corporate technology strategy perspective on carbon capture and storage (CCS). → CCS technology is precautionary, sustaining, cumulative and situated. → Decision-makers need to look beyond cost and risk as barriers to investment in CCS.

  17. Challenges in the management of early versus late presenting ...

    African Journals Online (AJOL)

    ... presenting CDH poses more diagnostic challenges; but once identified and appropriate treatment instituted, it has an excellent prognosis. We recommend that physicians should include CDH in the differential diagnosis of patients with birth asphyxia and in patients with chronic respiratory symptoms with failure to thrive.

  18. Smart integrated microsystems: the energy efficiency challenge (Conference Presentation) (Plenary Presentation)

    Science.gov (United States)

    Benini, Luca

    2017-06-01

    The "internet of everything" envisions trillions of connected objects loaded with high-bandwidth sensors requiring massive amounts of local signal processing, fusion, pattern extraction and classification. From the computational viewpoint, the challenge is formidable and can be addressed only by pushing computing fabrics toward massive parallelism and brain-like energy efficiency levels. CMOS technology can still take us a long way toward this goal, but technology scaling is losing steam. Energy efficiency improvement will increasingly hinge on architecture, circuits, design techniques such as heterogeneous 3D integration, mixed-signal preprocessing, event-based approximate computing and non-Von-Neumann architectures for scalable acceleration.

  19. Challenges in teaching modern manufacturing technologies

    Science.gov (United States)

    Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

    2015-07-01

    Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in executing various projects. Lectures are developed to contain materials featuring advanced manufacturing technologies, R&D trends in manufacturing. Pre- and post-surveys were conducted by an external evaluator to assess the impact of the course on increase in student's knowledge of manufacturing; increase students' preparedness and confidence in effective communication and; increase students' interest in pursuing additional academic studies and/or a career path in manufacturing and high technology. The surveyed data indicate that the students perceived significant gains in manufacturing knowledge and preparedness in effective communication. The study also shows that implementation of a collaborative course within multiple institutions requires a robust and collective communication platform.

  20. The present and future of positive technologies

    OpenAIRE

    Botella C.; Riva G.; Gaggioli A.; Wiederhold B.K.; Alcaniz M.; Banos R.M.

    2012-01-01

    The goal of this work is to delimit the field of Positive Technology—the scientific and applied approach to the use of technology for improving the quality of our personal experience. This new field combines the objectives of Positive Psychology with enhancements of Information and Communication Technologies (ICTs) by focusing on three key variables—emotional quality, engagement/actualization, and connectedness—that are able to transform our personal experience in a tool for build...

  1. Past Results, Present Trends, and Future Challenges in Intrabody Communication

    Directory of Open Access Journals (Sweden)

    David Naranjo-Hernández

    2018-01-01

    Full Text Available Intrabody communication (IBC is a wireless communication technology using the human body to develop body area networks (BANs for remote and ubiquitous monitoring. IBC uses living tissues as a transmission medium, achieving power-saving and miniaturized transceivers, making communications more robust against external interference and attacks on the privacy of transmitted data. Due to these advantages, IBC has been included as a third physical layer in the IEEE 802.15.6 standard for wireless body area networks (WBANs designated as Human Body Communication (HBC. Further research is needed to compare both methods depending on the characteristics of IBC application. Challenges remain for an optimal deployment of IBC technology, such as the effect of long-term use in the human body, communication optimization through more realistic models, the influence of both anthropometric characteristics and the subject’s movement on the transmission performance, standardization of communications, and development of small-size and energy-efficient prototypes with increased data rate. The purpose of this work is to provide an in-depth overview of recent advances and future challenges in human body/intrabody communication for wireless communications and mobile computing.

  2. Key technological challenges for JSFR development

    International Nuclear Information System (INIS)

    Morishita, Masaki; Nakai, Ryodai; Aoto, Kazumi

    2008-01-01

    JSFR is a sodium cooled loop type fast reactor on which a conceptual design study is now underway in the framework of 'Fast Reactor Cycle Technology Development Project (FaCT project)' of Japan. Achieving economic competitiveness with future light water reactors, along with assuring high level of safety and reliability, is among the most crucial development targets. A number of innovative technologies are pursued for these purposes. A two loop primary heat transfer system (PHTS) design, integration of a main circulation pump and an intermediate heat exchanger (IHX) into one single component, and adoption of high chrome ferritic steel as a structural material are typical technologies mainly for economic purposes. A passive shutdown system, decay heat removal by natural convection, and re-criticality free core configuration are those for mainly safety enhancement purposes. Technically challenging issues inevitably accompany these innovative technologies, and a systematic research and development program is undertaken for resolving these issues and realization of the plant design. An overall picture will be given in this paper on the design concept of JSFR that will be followed by descriptions on the major innovative technologies and their relevant research and development activities. (author)

  3. The challenge of technology diversification and markets

    International Nuclear Information System (INIS)

    Bollini, G.

    2002-01-01

    Tecnatom is developing since several years ago the diversification of technologies and markets given its enterprise vocation of technological leadership in the services and products supplied in both the national and international nuclear market. In this paper, a description of the historical development of these technologies is made, and how the diversification is initiated in the global market, as well as the identification of the segments of the industrial market where services and products of high technology can be provided. A description of the diversification strategy is included and several results of this policy are presented for the aircraft and space market, the transport market, the industrial processes market, etc. Finally, examples of developments of new technologies of virtual reality and augmented reality are explained and how these new capabilities feedback in the nuclear market. (Author)

  4. Challenge Based Innovation @ mediterranean - final presentations & prototype expo

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Challenge Based Innovation @ mediterranean - Final presentations & prototype expo Note - presentation location has been changed to the council chamber (503-1-001) due to the large amount of signups. External participants are guided from the main reception (building 33), more information over email on Wednesday. Prototype presentations are still at IdeaSquare (3179) 18.00 - 19.30, guided walking from the presentationsChallenge Based Innovation (CBI) is a four month project course, where multidisciplinary student teams and their instructors collaborate with researchers at CERN to discover novel solutions for the future of humankind. The projects are an elaborate mixture, where societal, human-driven needs meet research at CERN. More info about CBI from the course website, cbi-course.com The Gala on 1.12. will introduce the proof-of concept prototypes the five student teams have developed to answer a wide range of societal challenges, inspired by people and r...

  5. Reprocessing technology for present water reactor fuels

    International Nuclear Information System (INIS)

    McMurray, P.R.

    1977-01-01

    The basic Purex solvent extraction technology developed and applied in the U.S. in the 1950's provides a well-demonstrated and efficient process for recovering uranium and plutonium for fuel recycle and separating the wastes for further treatment and packaging. The technologies for confinement of radioactive effluents have been developed but have had limited utilization in the processing of commercial light water reactor fuels. Technologies for solidification and packaging of radioactive wastes have not yet been demonstrated but significant experience has been gained in laboratory and engineering scale experiments with simulated commercial reprocessing wastes and intermediate level wastes. Commercial scale experience with combined operations of all the required processes and equipment are needed to demonstrate reliable reprocessing centers

  6. BNL superconducting RF guns - technology challenges as ERL sources

    International Nuclear Information System (INIS)

    Burrill, A.; Ben-Zvi, I.; Calaga, R.; Chang, X.; Hahn, H.; Kayran, D.; Kewisch, J.; Litvinenko, V.; McIntyre, G.; Nicoletti, A.; Pate, D.; Rank, J.; Scaduto, J.; Rao, T.; Wu, K.; Zaltsman, A.; Zhao, Y.; Bluem, H.; Cole, M.; Falletta, M.; Holmes, D.; Peterson, E.; Rathke, J.; Schultheiss, T.; Todd, A.; Wong, R.; Lewellen, J.; Funk, W.; Kneisel, P.; Phillips, L.; Preble, J.; Janssen, D.; Nguyen-Tuong, V.

    2005-01-01

    The design, fabrication and commissioning of a 703.75 MHz SRF photoinjector with a retractable multi-alkali photocathode designed to deliver 0.5A average current at 100% duty factor is the present undertaking of the electron cooling group in the Collider Accelerator Division of Brookhaven National Labs. This photoinjector represents the state of the art in photoinjector technology, orders of magnitude beyond the presently available technology, and should be commissioned by 2007. The RandD effort presently underway, and the focus of this paper, will address the numerous technological challenges that must be met for this project to succeed. These include the novel physics design of the cavity, the challenges of inserting and operating a multi-alkali photocathode in the photoinjector at these high average currents, and the design and installation of a laser system capable of delivering the required 10s of watts of laser power needed to make this photoinjector operational

  7. Technology and Science Education: New Challenges

    Science.gov (United States)

    García, Beatriz Amante; Martínez, María Martínez

    2017-01-01

    The first editorial of the new year usually presents an analysis of the journal evolution. This article provides a reflection on the changes the journal has undergone over the years, and the challenges it will face in 2017. The journal expresses pride in advocating for international scholars, allowing authors to speak with their own voices, and…

  8. Abandonment: Technological, organisational and environmental challenges

    Energy Technology Data Exchange (ETDEWEB)

    Twomey, B.G. [Reverse Engineering Ltd., (United Kingdom)

    1996-12-31

    The paper deals with the abandonment of offshore wells. Decommissioning of offshore installations is a complex multi-disciplined issue, which raises a number of technical, organisational and environmental challenges. The success of a planned decommissioning operation depends on the development of a clear understanding of the complex blend of drivers which control the decommissioning process and their inter-relationship. Due to the complexity of the inter-relationship between the primary drivers one cannot separate the technological, organisational and environmental issues raised by the decommissioning of offshore installations. The optimal solution will be a compromise between all the decommissioning drivers mentioned in this paper. 5 figs., 3 tabs.

  9. Abandonment: Technological, organisational and environmental challenges

    International Nuclear Information System (INIS)

    Twomey, B.G.

    1996-01-01

    The paper deals with the abandonment of offshore wells. Decommissioning of offshore installations is a complex multi-disciplined issue, which raises a number of technical, organisational and environmental challenges. The success of a planned decommissioning operation depends on the development of a clear understanding of the complex blend of drivers which control the decommissioning process and their inter-relationship. Due to the complexity of the inter-relationship between the primary drivers one cannot separate the technological, organisational and environmental issues raised by the decommissioning of offshore installations. The optimal solution will be a compromise between all the decommissioning drivers mentioned in this paper. 5 figs., 3 tabs

  10. Scientific data management challenges, technology and deployment

    CERN Document Server

    Rotem, Doron

    2010-01-01

    Dealing with the volume, complexity, and diversity of data currently being generated by scientific experiments and simulations often causes scientists to waste productive time. Scientific Data Management: Challenges, Technology, and Deployment describes cutting-edge technologies and solutions for managing and analyzing vast amounts of data, helping scientists focus on their scientific goals. The book begins with coverage of efficient storage systems, discussing how to write and read large volumes of data without slowing the simulation, analysis, or visualization processes. It then focuses on the efficient data movement and management of storage spaces and explores emerging database systems for scientific data. The book also addresses how to best organize data for analysis purposes, how to effectively conduct searches over large datasets, how to successfully automate multistep scientific process workflows, and how to automatically collect metadata and lineage information. This book provides a comprehensive u...

  11. Technologies in deep and ultra-deep well drilling: Present status, challenges and future trend in the 13th Five-Year Plan period (2016–2020

    Directory of Open Access Journals (Sweden)

    Haige Wang

    2017-09-01

    Full Text Available During the 12th Five-Year Plan period (2011–2015, CNPC independently developed a series of new drilling equipment, tools and chemical materials for deep and ultra-deep wells, including six packages of key drilling equipment: rigs for wells up to 8000 m deep, quadruple-joint-stand rigs, automatic pipe handling devices for rigs for wells being 5000/7000 m deep, managed pressure drilling systems & equipment, gas/fuel alternative combustion engine units, and air/gas/underbalanced drilling systems; seven sets of key drilling tools: automatic vertical well drilling tools, downhole turbine tools, high-performance PDC bits, hybrid bits, bit jet pulsation devices, no-drilling-surprise monitoring system, & casing running devices for top drive; and five kinds of drilling fluids and cementing slurries: high temperature and high density water-based drilling fluids, oil-based drilling fluids, high temperature and large temperature difference cementing slurry, and ductile cement slurry system. These new development technologies have played an important role in supporting China's oil and gas exploration and development business. During the following 13th Five-Year Plan period (2016–2020, there are still many challenges to the drilling of deep and ultra-deep wells, such as high temperatures, high pressures, narrow pressure window, wellbore integrity and so on, as well as the enormous pressure on cost reduction and efficiency improvement. Therefore, the future development trend will be focused on the development of efficient and mobile rigs, high-performance drill bits and auxiliary tools, techniques for wellbore integrity and downhole broadband telemetry, etc. In conclusion, this study will help improve the ability and level of drilling ultra-deep wells and provide support for oil and gas exploration and development services in China. Keywords: Deep well, Ultra-deep well, Drilling techniques, Progress, Challenge, Strategy, CNPC

  12. Crab cavities: Past, present, and future of a challenging device

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Q. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-05-03

    In two-ring facilities operating with a crossing-angle collision scheme, luminosity can be limited due to an incomplete overlapping of the colliding bunches. Crab cavities then are introduced to restore head-on collisions by providing the destined opposite deflection to the head and tail of the bunch. An increase in luminosity was demonstrated at KEKB with global crab-crossing, while the Large Hardron Collider (LHC) at CERN currently is designing local crab crossing for the Hi-Lumi upgrade. Future colliders may investigate both approaches. In this paper, we review the challenges in the technology, and the implementation of crab cavities, while discussing experience in earlier colliders, ongoing R&D, and proposed implementations for future facilities, such as HiLumi-LHC, CERN’s compact linear collider (CLIC), the international linear collider (ILC), and the electron-ion collider under design at BNL (eRHIC).

  13. Crab cavities: Past, present, and future of a challenging device

    International Nuclear Information System (INIS)

    Wu, Q.

    2015-01-01

    In two-ring facilities operating with a crossing-angle collision scheme, luminosity can be limited due to an incomplete overlapping of the colliding bunches. Crab cavities then are introduced to restore head-on collisions by providing the destined opposite deflection to the head and tail of the bunch. An increase in luminosity was demonstrated at KEKB with global crab-crossing, while the Large Hardron Collider (LHC) at CERN currently is designing local crab crossing for the Hi-Lumi upgrade. Future colliders may investigate both approaches. In this paper, we review the challenges in the technology, and the implementation of crab cavities, while discussing experience in earlier colliders, ongoing R&D, and proposed implementations for future facilities, such as HiLumi-LHC, CERN@@@s compact linear collider (CLIC), the international linear collider (ILC), and the electron-ion collider under design at BNL (eRHIC).

  14. Crab Cavities: Past, Present, and Future of a Challenging Device

    CERN Document Server

    Wu, Q

    2015-01-01

    In two-ring facilities operating with a crossing-angle collision scheme, luminosity can be limited due to an incomplete overlapping of the colliding bunches. Crab cavities then are introduced to restore head-on collisions by providing the destined opposite deflection to the head and tail of the bunch. An increase in luminosity was demonstrated at KEKB with global crab- crossing, while the Large Hardron Collider (LHC) at CERN currently is designing local crab crossing for the Hi-Lumi upgrade. Future colliders may investigate both approaches. In this paper, we review the challenges in the technology, and the implementation of crab cavities, while discussing experience in earlier colliders, ongoing R&D, and proposed implementations for future facilities, such as HiLumi-LHC, CERN’s compact linear collider (CLIC), the international linear collider (ILC), and the electronion collider under design at BNL (eRHIC).

  15. Safeguards technology: present posture and future impact

    International Nuclear Information System (INIS)

    Keepin, G.R.

    1976-01-01

    With widespread and growing concern over the issues of nuclear safeguards, international nuclear trade and nuclear weapons proliferation, the full development of the world's nuclear energy potential could well depend on how effectively the strategic nuclear materials that fuel nuclear power are controlled and safeguarded. The broad U.S. program in nuclear safeguards and security is directed toward a balanced safeguards system incorporating the two major components of physical security and materials control. The current posture of modern safeguards technology, its impact on plant operations, and the key role it must play in the implementation of stringent cost-effective safeguards systems in facilities throughout the nuclear fuel cycle are outlined

  16. Scientific challenges in sustainable energy technology

    Science.gov (United States)

    Lewis, Nathan

    2006-04-01

    We describe and evaluate the technical, political, and economic challenges involved with widespread adoption of renewable energy technologies. First, we estimate fossil fuel resources and reserves and, together with the current and projected global primary power production rates, estimate the remaining years of oil, gas, and coal. We then compare the conventional price of fossil energy with that from renewable energy technologies (wind, solar thermal, solar electric, biomass, hydroelectric, and geothermal) to evaluate the potential for a transition to renewable energy in the next 20-50 years. Secondly, we evaluate - per the Intergovernmental Panel on Climate Change - the greenhouse constraint on carbon-based power consumption as an unpriced externality to fossil-fuel use, considering global population growth, increased global gross domestic product, and increased energy efficiency per unit GDP. This constraint is projected to drive the demand for carbon-free power well beyond that produced by conventional supply/demand pricing tradeoffs, to levels far greater than current renewable energy demand. Thirdly, we evaluate the level and timescale of R&D investment needed to produce the required quantity of carbon-free power by the 2050 timeframe. Fourth, we evaluate the energy potential of various renewable energy resources to ascertain which resources are adequately available globally to support the projected demand. Fifth, we evaluate the challenges to the chemical sciences to enable the cost-effective production of carbon-free power required. Finally, we discuss the effects of a change in primary power technology on the energy supply infrastructure and discuss the impact of such a change on the modes of energy consumption by the energy consumer and additional demands on the chemical sciences to support such a transition in energy supply.

  17. Workshop and conference on Grand Challenges applications and software technology

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    On May 4--7, 1993, nine federal agencies sponsored a four-day meeting on Grand Challenge applications and software technology. The objective was to bring High-Performance Computing and Communications (HPCC) Grand Challenge applications research groups supported under the federal HPCC program together with HPCC software technologists to: discuss multidisciplinary computational science research issues and approaches, identify major technology challenges facing users and providers, and refine software technology requirements for Grand Challenge applications research. The first day and a half focused on applications. Presentations were given by speakers from universities, national laboratories, and government agencies actively involved in Grand Challenge research. Five areas of research were covered: environmental and earth sciences; computational physics; computational biology, chemistry, and materials sciences; computational fluid and plasma dynamics; and applications of artificial intelligence. The next day and a half was spent in working groups in which the applications researchers were joined by software technologists. Nine breakout sessions took place: I/0, Data, and File Systems; Parallel Programming Paradigms; Performance Characterization and Evaluation of Massively Parallel Processing Applications; Program Development Tools; Building Multidisciplinary Applications; Algorithm and Libraries I; Algorithms and Libraries II; Graphics and Visualization; and National HPCC Infrastructure.

  18. Overcoming etch challenges related to EUV based patterning (Conference Presentation)

    Science.gov (United States)

    Metz, Andrew W.; Cottle, Hongyun; Honda, Masanobu; Morikita, Shinya; Kumar, Kaushik A.; Biolsi, Peter

    2017-04-01

    Research and development activities related to Extreme Ultra Violet [EUV] defined patterning continue to grow for cost and extreme process control challenges of Self-Aligned Quad Patterning [SAQP] with continued momentum for EUV ecosystem readiness could provide cost advantages in addition to improved intra-level overlay performance relative to multiple patterning approaches. However, Line Edge Roughness [LER] and Line Width Roughness [LWR] performance of EUV defined resist images are still far from meeting technology needs or ITRS spec performance. Furthermore, extreme resist height scaling to mitigate flop over exacerbates the plasma etch trade-offs related to traditional approaches of PR smoothing, descum implementation and maintaining 2D aspect ratios of short lines or elliptical contacts concurrent with ultra-high photo resist [PR] selectivity. In this paper we will discuss sources of LER/LWR, impact of material choice, integration, and innovative plasma process techniques and describe how TELTM VigusTM CCP Etchers can enhance PR selectivity, reduce LER/LWR, and maintain 2D aspect ratio of incoming patterns. Beyond traditional process approaches this paper will show the utility of: [1] DC Superposition in enhancing EUV resist hardening and selectivity, increasing resistance to stress induced PR line wiggle caused by CFx passivation, and mitigating organic planarizer wiggle; [2] Quasi Atomic Layer Etch [Q-ALE] for ARC open eliminating the tradeoffs between selectivity, CD, and shrink ratio control; and [3] ALD+Etch FUSION technology for feature independent CD shrink and LER reduction. Applicability of these concepts back transferred to 193i based lithography is also confirmed.

  19. Challenges in industrial fermentation technology research.

    Science.gov (United States)

    Formenti, Luca Riccardo; Nørregaard, Anders; Bolic, Andrijana; Hernandez, Daniela Quintanilla; Hagemann, Timo; Heins, Anna-Lena; Larsson, Hilde; Mears, Lisa; Mauricio-Iglesias, Miguel; Krühne, Ulrich; Gernaey, Krist V

    2014-06-01

    Industrial fermentation processes are increasingly popular, and are considered an important technological asset for reducing our dependence on chemicals and products produced from fossil fuels. However, despite their increasing popularity, fermentation processes have not yet reached the same maturity as traditional chemical processes, particularly when it comes to using engineering tools such as mathematical models and optimization techniques. This perspective starts with a brief overview of these engineering tools. However, the main focus is on a description of some of the most important engineering challenges: scaling up and scaling down fermentation processes, the influence of morphology on broth rheology and mass transfer, and establishing novel sensors to measure and control insightful process parameters. The greatest emphasis is on the challenges posed by filamentous fungi, because of their wide applications as cell factories and therefore their relevance in a White Biotechnology context. Computational fluid dynamics (CFD) is introduced as a promising tool that can be used to support the scaling up and scaling down of bioreactors, and for studying mixing and the potential occurrence of gradients in a tank. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Fog Water Collection: Challenges beyond Technology

    Directory of Open Access Journals (Sweden)

    Manzoor Qadir

    2018-03-01

    Full Text Available The Sustainable Development Goal (SDG 6, calling for access to safe water and sanitation for all by the year 2030 supports the efforts in water-scarce countries and regions to go beyond conventional resources and tap unconventional water supplies to narrow the water demand-supply gap. Among the unconventional water resources, the potential to collect water from the air, such as fog harvesting, is by far the most under-explored. Fog water collection is a passive, low maintenance, and sustainable option that can supply fresh drinking water to communities where fog events are common. Because of the relatively simple design of fog collection systems, their operation and maintenance are minimal and the associated cost likewise; although, in certain cases, some financially constrained communities would need initial subsidies. Despite technology development and demonstrated benefits, there are certain challenges to fog harvesting, including lack of supportive policies, limited functional local institutions, inexpert communities, gender inequality, and perceived high costs without undertaking comprehensive economic analyses. By addressing such challenges, there is an opportunity to provide potable water in areas where fog intensity and duration are sufficient, and where the competition for clean water is intensifying because water resources are at a far distance or provided by expensive sources.

  1. Direct laser writing of auxetic structures: present capabilities and challenges

    International Nuclear Information System (INIS)

    Hengsbach, Stefan; Lantada, Andrés Díaz

    2014-01-01

    Auxetic materials (or metamaterials) are those with a negative Poisson ratio (NPR) and that display the unexpected property of lateral expansion when stretched, as well as an equal and opposing densification when compressed. Such geometries are being progressively employed in the development of novel products, especially in the fields of intelligent expandable actuators, shape morphing structures and minimally invasive implantable devices. Although several micromanufacturing technologies have already been applied to the development of auxetic geometries and devices, additional precision is needed to take full advantage of their special mechanical properties. In this study we present a very promising approach for the development of auxetic metamaterials and devices based on the use of direct laser writing. The process stands out for its precision and complex three-dimensional (3D) geometries attainable without the need of supporting structures. To our knowledge it represents one of the first examples of the application of this technology to the manufacture of auxetic geometries and mechanical metamaterials, with details even more remarkable than those shown in very recent studies, almost reaching the current limit of this additive manufacturing technology. We have used some special 3D auxetic designs whose remarkable NPR has been previously highlighted. (paper)

  2. Future technology challenges in non-proliferation

    International Nuclear Information System (INIS)

    Richardson, J.H.

    2004-01-01

    Radiation detection technologies are an important tool in the prevention of proliferation. A variety of new developments have enabled enhanced performance in terms of energy resolution, spatial resolution, predictive modeling and simulation, active interrogation, and ease of operation and deployment in the field. For example, various gamma ray imaging approaches are being explored to combine spatial resolution with background suppression in order to enhance sensitivity at reasonable standoff distances and acquisition times. New materials and approaches are being developed in order to provide adequate energy resolution in field use without the necessity for liquid nitrogen. Finally, different detectors combined into distributed networks offer promise for detection and tracking of radioactive materials. As the world moves into the 21st century, the possibility of greater reliance on nuclear energy will impose additional technical requirements to prevent proliferation. In addition to proliferation resistant reactors, a careful examination of the various possible fuel cycles from cradle to grave will provide additional technical and nonproliferation challenges in the areas of conversion, enrichment, transportation, recycling and waste disposal. Radiation detection technology and information management have a prominent role in any future global regime for nonproliferation beyond the current Advanced Protocol. This work was performed under the auspices of the U.S. Department of Energy by University of California, Lawrence Livermore National Laboratory under contract No. W-7405-Eng-48. (author)

  3. Issues in vaccinology: Present challenges and future directions.

    Science.gov (United States)

    Sheerin, Dylan; Openshaw, Peter Jm; Pollard, Andrew J

    2017-12-01

    Vaccination is a principal and highly cost-effective means of controlling infectious diseases, providing direct protection against pathogens by conferring long-lasting immunological memory and inducing population-level herd immunity. Despite rapid ongoing progress in vaccinology, there remain many obstacles to the development and deployment of novel or improved vaccines; these include the underlying science of how to induce and sustain appropriate protective immune responses as well as bureaucratic, logistic and socio-political hurdles. The failure to distribute and administer existing vaccines to at-risk communities continues to account for a large proportion of infant mortality worldwide: almost 20 million children do not have access to basic vaccines and several million still die each year as a result. While emerging epidemic or pandemic diseases pose a significant threat to global health and prosperity, there are many infectious diseases which provide a continuous or cyclical burden on healthcare systems which also need to be addressed. Gaps in knowledge of the human immune system stand in the way of developing technologies to overcome individual and pathogenic variation. The challenges in tackling infectious disease and directions that the field of preventive medicine may take to improve the current picture of global health are the focus of this review. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Technological Challenges for High-Brightness Photo-Injectors

    CERN Multimedia

    Suberlucq, Guy

    2004-01-01

    Many applications, from linear colliders to free-electron lasers, passing through light sources and many other electron sources, require high brightness electron beams, usually produced by photo-injectors. Because certain parameters of these applications differ by several orders of magnitude, various solutions were implemented for the design and construction of the three main parts of the photo-injectors: lasers, photocathodes and guns. This paper summarizes the different requirements, how they lead to technological challenges and how R&D programs try to overcome these challenges. Some examples of state-of-the-art parts are presented.

  5. THE ASSESSMENT OF CYBERBULLYING: THE PRESENT SITUATION AND FUTURE CHALLENGE

    Directory of Open Access Journals (Sweden)

    Beatriz Lucas-Molina

    2016-01-01

    Full Text Available In the last decade there has been a significant increase in the interest of the educational and scientific community on cyberbullying, a new form of peer abuse and intimidation. Despite the widespread proliferation of studies and assessment tools on the phenomenon, there are still major conceptual and methodological gaps. This paper offers a comprehensive and updated review of the results of research on the definition of the construct, its prevalence and its impact on the people involved. Finally, it focuses specifically on the assessment of the construct and provides a brief review of the general and psychometric characteristics of the instruments used in some of the most relevant national and international studies conducted on the subject. This work places special emphasis on the present and future challenges and concludes with a number of general recommendations intended to guide the correct selection and/or construction of assessment instruments in this field of study.

  6. ASSESSMENT OF QUALITY OF LIFE: PRESENT AND FUTURE METHODOLOGICAL CHALLENGES

    Directory of Open Access Journals (Sweden)

    Isabel Benítez

    2016-01-01

    Full Text Available The growing importance of quality of life in diverse domains, such as health, school performance and social participation, has led to the development of new conceptualisations and assessments of the construct. This diversity of perspectives brings about many benefits, but it also creates an obstacle for the formulation of a single unifying definition of the construct and, therefore, an agreed instrument or assessment framework. The aim of this study is to discuss the current methodological challenges in the measurement of quality of life. Firstly, we provide a brief description of the construct as defined in various areas, then we examine the new methodological developments and different applications. We also present an overview of the different possibilities for future developments in defining and measuring quality of life in national and international studies.

  7. Technological Innovations and International Humanitarian Law: Challenges and Tensions

    Directory of Open Access Journals (Sweden)

    Eric Pomès

    2017-12-01

    Full Text Available In recent years, armed conflicts have changed in nature (civil war, ‘terrorism’ and the means used are increasingly technological (robotisation, cyberwar. Faced with these developments, some would claim International Humanitarian Law (IHL is outdated. While these technological innovations present new challenges in the application of IHL, it still constitutes a relevant legal framework for armed conflicts and the conduct of hostilities. Indeed, the flexibility of IHL allows it to adapt to contemporary conflicts. Therefore, this shows that the statements about its obsolescence are primarily political in nature.

  8. WERF Nutrient Challenge investigates limits of nutrient removal technologies.

    Science.gov (United States)

    Neethling, J B; Clark, D; Pramanik, A; Stensel, H D; Sandino, J; Tsuchihashi, R

    2010-01-01

    The WERF Nutrient Challenge is a multi-year collaborative research initiative established in 2007 to develop and provide current information about wastewater treatment nutrients (specifically nitrogen and phosphorus in wastewater), their characteristics, and bioavailability in aquatic environments to help regulators make informed decisions. The Nutrient Challenge will also provide data on nutrient removal so that treatment facilities can select sustainable, cost-effective methods and technologies to meet permit limits. To meet these goals, the Nutrient Challenge has teamed with a wide array of utilities, agencies, consultants, universities and other researchers and practitioners to collaborate on projects that advance these goals. The Nutrient Challenge is focusing on a different approach to collaborating and leveraging resources (financial and intellectual) on research projects by targeting existing projects and research that correspond with its goals and funding those aspects that the Nutrient Challenge identified as a priority. Because the Nutrient Challenge is focused on collaboration, outreach is an absolutely necessary component of its effectiveness. Through workshops, webinars, a web portal and online compendium, published papers, and conference lectures, the Nutrient Challenge is both presenting important new information, and soliciting new partnerships.

  9. Big Data: Survey, Technologies, Opportunities, and Challenges

    Directory of Open Access Journals (Sweden)

    Nawsher Khan

    2014-01-01

    Full Text Available Big Data has gained much attention from the academia and the IT industry. In the digital and computing world, information is generated and collected at a rate that rapidly exceeds the boundary range. Currently, over 2 billion people worldwide are connected to the Internet, and over 5 billion individuals own mobile phones. By 2020, 50 billion devices are expected to be connected to the Internet. At this point, predicted data production will be 44 times greater than that in 2009. As information is transferred and shared at light speed on optic fiber and wireless networks, the volume of data and the speed of market growth increase. However, the fast growth rate of such large data generates numerous challenges, such as the rapid growth of data, transfer speed, diverse data, and security. Nonetheless, Big Data is still in its infancy stage, and the domain has not been reviewed in general. Hence, this study comprehensively surveys and classifies the various attributes of Big Data, including its nature, definitions, rapid growth rate, volume, management, analysis, and security. This study also proposes a data life cycle that uses the technologies and terminologies of Big Data. Future research directions in this field are determined based on opportunities and several open issues in Big Data domination. These research directions facilitate the exploration of the domain and the development of optimal techniques to address Big Data.

  10. Academic Training - Technological challenges of CLIC

    CERN Multimedia

    Françoise Benz

    2006-01-01

    2005-2006 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 12, 13, 14, 15 and 16 June 11:00-12:00 - Auditorium, bldg 500 Technological challenges of CLIC R. Corsini, S. Doebert, S. Redaelli, T.Lefevre, CERN-AB and G. Arnau Izquierdo, H. Mainaud, CERN-TS Future e+e- Linear Colliders offer the potential to explore new physics at the TeV scale and beyond to very high precision. While the International Linear Collider (ILC) scheme of a collider in the 0.5 - 1 TeV range enters the engineering design phase, the Compact Linear Collider (CLIC) study explores the technical feasibility of a collider capable of reaching into the multi-TeV energy domain. Key ingredients of the CLIC scheme are acceleration at high-frequency (30 GHz) and high-gradient (150 MV/m) in normal conducting structures and the use of the so-called Two Beam Acceleration concept, where a high-charge electron beam (drive beam) running parallel to the main beam is decelerated to provide the RF power to accelerate the main beam itself. A vigorous R&...

  11. Big data: survey, technologies, opportunities, and challenges.

    Science.gov (United States)

    Khan, Nawsher; Yaqoob, Ibrar; Hashem, Ibrahim Abaker Targio; Inayat, Zakira; Ali, Waleed Kamaleldin Mahmoud; Alam, Muhammad; Shiraz, Muhammad; Gani, Abdullah

    2014-01-01

    Big Data has gained much attention from the academia and the IT industry. In the digital and computing world, information is generated and collected at a rate that rapidly exceeds the boundary range. Currently, over 2 billion people worldwide are connected to the Internet, and over 5 billion individuals own mobile phones. By 2020, 50 billion devices are expected to be connected to the Internet. At this point, predicted data production will be 44 times greater than that in 2009. As information is transferred and shared at light speed on optic fiber and wireless networks, the volume of data and the speed of market growth increase. However, the fast growth rate of such large data generates numerous challenges, such as the rapid growth of data, transfer speed, diverse data, and security. Nonetheless, Big Data is still in its infancy stage, and the domain has not been reviewed in general. Hence, this study comprehensively surveys and classifies the various attributes of Big Data, including its nature, definitions, rapid growth rate, volume, management, analysis, and security. This study also proposes a data life cycle that uses the technologies and terminologies of Big Data. Future research directions in this field are determined based on opportunities and several open issues in Big Data domination. These research directions facilitate the exploration of the domain and the development of optimal techniques to address Big Data.

  12. Big Data: Survey, Technologies, Opportunities, and Challenges

    Science.gov (United States)

    Khan, Nawsher; Yaqoob, Ibrar; Hashem, Ibrahim Abaker Targio; Inayat, Zakira; Mahmoud Ali, Waleed Kamaleldin; Alam, Muhammad; Shiraz, Muhammad; Gani, Abdullah

    2014-01-01

    Big Data has gained much attention from the academia and the IT industry. In the digital and computing world, information is generated and collected at a rate that rapidly exceeds the boundary range. Currently, over 2 billion people worldwide are connected to the Internet, and over 5 billion individuals own mobile phones. By 2020, 50 billion devices are expected to be connected to the Internet. At this point, predicted data production will be 44 times greater than that in 2009. As information is transferred and shared at light speed on optic fiber and wireless networks, the volume of data and the speed of market growth increase. However, the fast growth rate of such large data generates numerous challenges, such as the rapid growth of data, transfer speed, diverse data, and security. Nonetheless, Big Data is still in its infancy stage, and the domain has not been reviewed in general. Hence, this study comprehensively surveys and classifies the various attributes of Big Data, including its nature, definitions, rapid growth rate, volume, management, analysis, and security. This study also proposes a data life cycle that uses the technologies and terminologies of Big Data. Future research directions in this field are determined based on opportunities and several open issues in Big Data domination. These research directions facilitate the exploration of the domain and the development of optimal techniques to address Big Data. PMID:25136682

  13. Research of design challenges and new technologies for floating LNG

    Directory of Open Access Journals (Sweden)

    Dong-Hyun Lee

    2014-06-01

    Full Text Available With the rate of worldwide LNG demand expected to grow faster than that of gas demand, most major oil companies are currently investing their resources to develop floating LNG-FLNG (i.e. LNG FSRU and LNG FPSO. The global Floating LNG (FLNG market trend will be reviewed based on demand and supply chain relationships. Typical technical issues associated with FLNG design are categorized in terms of global performance evaluation. Although many proven technologies developed through LNG carrier and oil FPSO projects are available for FLNG design, we are still faced with several technical challenges to clear for successful FLNG projects. In this study, some of the challenges encountered during development of the floating LNG facility (i.e. LNG FPSO and FSRU will be reviewed together with their investigated solution. At the same time, research of new LNG-related technologies such as combined containment system will be presented.

  14. NASA/ESTO investments in remote sensing technologies (Conference Presentation)

    Science.gov (United States)

    Babu, Sachidananda R.

    2017-02-01

    For more then 18 years NASA Earth Science Technology Office has been investing in remote sensing technologies. During this period ESTO has invested in more then 900 tasks. These tasks are managed under multiple programs like Instrument Incubator Program (IIP), Advanced Component Technology (ACT), Advanced Information Systems Technology (AIST), In-Space Validation of Earth Science Technologies (InVEST), Sustainable Land Imaging - Technology (SLI-T) and others. This covers the whole spectrum of technologies from component to full up satellite in space and software. Over the years many of these technologies have been infused into space missions like Aquarius, SMAP, CYGNSS, SWOT, TEMPO and others. Over the years ESTO is actively investing in Infrared sensor technologies for space applications. Recent investments have been for SLI-T and InVEST program. On these tasks technology development is from simple Bolometers to Advanced Photonic waveguide based spectrometers. Some of the details on these missions and technologies will be presented.

  15. Scabies, a Zoonotic Disease : Present and Future Challenge

    Directory of Open Access Journals (Sweden)

    April H Wardhana

    2006-03-01

    Full Text Available Scabies is a contagious skin disease caused by a mite of Sarcoptes scabiei . It is found worldwide particularly in regions related with of poverty, remote area, poor sanitations and nutritional status in both human and animals . Scabies is transmitted by direct contact . The clinical signs are intensive pruritis or itchiness, erythrema, papula and vesicle . Infestation S. scabiei caused damage skin and raised animal death (50 - 100% while 300 millions people per year were reported to suffer from scabies . Diagnosis of scabies is based on clinical signs and confirmed with gently scrapping the skin off burrow (seeking for eggs, faecals and mites . Beside that, the diagnosis can be obtained by ink test, mineral oil or fluorescence tetracycline test . ELISA method for detecting human scabies still has a disadvantage because there is a cross-reaction between host skin and var . S. scabiei antigens . The development of scabies vaccine also has many problems . Some human scabies cases were suspected from their livestock or pet animals . It is required a good and synergic collaboration between both health and livestock agencies that involved both human and vet medicals, investigators, quarantine staffs including researchers. Those factors become a challenge at present and in the future to prevent the spreading of scabies to a larger area and to minimize scabies cases in both human and animal, particularly in the endemic area .

  16. Detector technology challenges for nuclear medicine and PET

    International Nuclear Information System (INIS)

    Marsden, P.K.

    2003-01-01

    The challenges facing the development of new detector technology for single photon imaging and positron emission tomography (PET) are considered. There is currently great interest in functional imaging with radionuclides, particularly PET, triggered by new clinical applications and developments in molecular and cell biology. Multi-modality systems that combine radionuclide imaging with CT present new challenges, as do very high resolution systems for imaging small animals. Whilst for PET there are some fairly well defined routes to improving performance, the basic design of single photon systems has remained unchanged for many years. This review outlines the challenges that must be addressed by detector physicists in order to obtain significant advances in performance, and indicates some of the approaches currently being adopted. Emphasis is given to PET which is where the greatest opportunities appear to lie

  17. SIHTI 2. Energy and environmental technology. Yearbook 1995. Project presentations

    International Nuclear Information System (INIS)

    Korhonen, M.; Thun, R.

    1997-01-01

    Detrimental impacts of various energy production forms, their prevention and costs to enterprises and to the society are studied in the National Research Programme on Energy and Environmental Technology - SIHTI 2. For this evaluation work databases on Finland's energy production, fuels and boilers and emissions of various production forms are needed. This is one of the main subtasks of the SIHTI Programme. Development of methods and tools required for environmental decision making and for the assessment of environmental costs and testing of their usability and reliability are equally important. Emission measurements are a problem field that continuously sets new challenges. In addition to energy production and its environmental impacts, environmental issues of the woodprocessing industries form another important research field of SIHTI 2 programme. A common aim of both fields is to reduce emissions of detrimental substances, to recycle raw materials, and to minimise and reuse wastes. Research and development projects are being carried out by a number of universities of different fields of science and technology, by research organisations and enterprises, and many projects are realised in close co-operation. In 1995, the programme comprised 28 R and D projects by universities and 22 enterprise-led projects. Results of these projects are presented in this yearbook. Part of the research projects continued from the preceding year and part were new projects continuing in 1996

  18. Earth Observations for Geohazards: Present and Future Challenges

    Directory of Open Access Journals (Sweden)

    Roberto Tomás

    2017-02-01

    Full Text Available Earth Observations (EO encompasses different types of sensors (e.g., Synthetic Aperture Radar, Laser Imaging Detection and Ranging, Optical and multispectral and platforms (e.g., satellites, aircraft, and Unmanned Aerial Vehicles and enables us to monitor and model geohazards over regions at different scales in which ground observations may not be possible due to physical and/or political constraints. EO can provide high spatial, temporal and spectral resolution, stereo-mapping and all-weather-imaging capabilities, but not by a single satellite at a time. Improved satellite and sensor technologies, increased frequency of satellite measurements, and easier access and interpretation of EO data have all contributed to the increased demand for satellite EO data. EO, combined with complementary terrestrial observations and with physical models, have been widely used to monitor geohazards, revolutionizing our understanding of how the Earth system works. This Special Issue presents a collection of scientific contributions focusing on innovative EO methods and applications for monitoring and modeling geohazards, consisting of four Sections: (1 earthquake hazards; (2 landslide hazards; (3 land subsidence hazards; and (4 new EO techniques and services.

  19. Latin America's present and future challenges in toxicology education

    International Nuclear Information System (INIS)

    Rojas, M.

    2005-01-01

    Industrialization that Latin America has experienced during the past 50 years, the increase of population and the growth of chemical-related industries has generated a variety of environmental problems that must be addressed. After assessing these profound changes, greater emphasis should be placed on the study of environmental health and toxicology. Latin American countries face many problems that are common to other developing nations. Therefore, there is a demand for safety assessment and regulatory control of chemicals that create a need for increasing numbers of toxicologists. To meet this demand, educational programs in toxicology have to be designed. This paper utilizes a consultation questionnaire that includes toxicology-network members, scientists and educational institutions where toxicology is taught. An analysis of the information collected is made, with an emphasis on what we currently lack and on future challenges for toxicology professionals. Although the response from the study institutions was 65% (13 countries out of 20), the paper aims to assess the present situation of toxicology. The convenience for a certification/recognition for toxicologists is also evaluated. Action needs to be taken to promote scientific development based on regional specific needs that require increasing at the number of toxicology programs, and promoting of cooperation between academics and researchers. Among the limitations we have are the variability of curricula, objectives and priorities. The increasing globalization of markets and regulations requires the harmonization of graduate/postgraduate programs to ensure that risk assessment and management are dealt with uniformly. Cooperation among our countries and international assistance should play a more prominent role in the promotion of regional integration and the more efficient utilization of international experience in defining educational policies

  20. ITER and the fusion reactor: status and challenge to technology

    International Nuclear Information System (INIS)

    Lackner, K.

    2001-01-01

    Fusion has a high potential, but requires an integrated physics and technology effort without precedence in non-military R and D, the basic physics feasibility demonstration will be concluded with ITER, although R and D for efficiency improvement will continue. The essential technological issues remaining at the start of ITER operation concern materials questions: first wall components and radiation tolerant (low activation materials). This paper comprised just the copy of the slides presentation with the following subjects: magnetic confinement fusion, the Tokamak, progress in Tokamak performance, ITER: its geneology, physics basis-critical issues, cutaway of ITER-FEAT, R and D - divertor cassette (L-5), differences power plant-ITER, challenges for ITER and fusion plants, main technological problems (plasma facing materials), structural and functional materials for fusion power plants, ferritic steels, EUROFER development, improvements beyond ferritic steels, costing among others. (nevyjel)

  1. Interactions between science and technology and present-day philosophy

    International Nuclear Information System (INIS)

    1981-01-01

    The authors plead for a revival of the symbiosis between science and technology and philosophy. Their contributions to the assessment of the consequences in science and technology as a task of philosophy as well as to the effects of science and technology on present-day philosophy want to give new impulses to this revival. (DG) [de

  2. Proceeding of the Fifth Scientific Presentation on Nuclear Safety Technology

    International Nuclear Information System (INIS)

    Suhaemi, Tj.; Sudarno; Sunaryo, G. R.; Supriatna, P.; Antariksawan, A. R.; Sumijanto; Febrianto; Histori; Aliq

    2000-01-01

    The proceedings includes the result of research and development activities on nuclear safety technology that have been done by research Center for Nuclear Safety Technology in 2000 and was presented on June 28, 2000. The proceedings is expected to give illustration of the research result on Nuclear Safety Technology

  3. Proceedings of the Fourth Scientific Presentation on Reactor Safety Technology

    International Nuclear Information System (INIS)

    1999-01-01

    The proceedings includes the result of research and development activities on nuclear safety technology that have been done by research Center for Nuclear Safety Technology in 1998/1999 and was presented on May 5, 1999. The proceedings is expected to give illustration of the research result on Nuclear Safety Technology

  4. Medical Robotics - A Real Challenge of Present and Especially Future

    Directory of Open Access Journals (Sweden)

    Ionel STARETU

    2013-12-01

    Full Text Available If we make a brief scan of the field known as Medical Robotics, we find that in recent years there has been an impetuous development of applications involving medical robots. Obviously, the most spectacular are remote robotic surgery systems, which, for example, in U.S. have been used in more than 3.5-4 million interventions. The systems AESOP, da Vinci and ZEUS are currently run in minimally invasive robotic surgery. Encouraging results were obtained at MIT (USA using robots in physiotherapy. Pearl is a robot designed as personal assistant of older patients, affected by disabilities. The Universities of Pittsburgh and Carnegie Mellon successfully develop it. In Plymouth and Aachen, researchers are involved in the creation of intelligent wheelchairs. At the University of Karlsruhe, robotic systems applicable to neurosurgery are created. Thus, the MICRoN project aims to create a robot to manipulate micron-sized objects with nanometer precision, applications including intervention in the living biological cells. In several research centers one works on the improvement of neural interfaces, from which it is expected a new generation of prostheses, controlled through functional electrical stimulation. It is also projected that the microsystem technology (MST will have a major impact in medicine through the introduction of new diagnostic techniques, dosing, remote microsurgery and neural prostheses, all based on the concept of minimally invasive therapy, mentioned above. This is the approximate image of research in Medical Robotics and obviously of some related fields, whose dynamics has been impressive lately, a trend that is maintained and even has clear signs of amplification, and fully justifies this approach. In this context, we will present the main concepts and applications of medical robotics in order to achieve a more suggestive and convincing image of this area of great interest and perspective.

  5. Application of GIS technology in public health: successes and challenges.

    Science.gov (United States)

    Fletcher-Lartey, Stephanie M; Caprarelli, Graziella

    2016-04-01

    The uptake and acceptance of Geographic Information Systems (GIS) technology has increased since the early 1990s and public health applications are rapidly expanding. In this paper, we summarize the common uses of GIS technology in the public health sector, emphasizing applications related to mapping and understanding of parasitic diseases. We also present some of the success stories, and discuss the challenges that still prevent a full scope application of GIS technology in the public health context. Geographical analysis has allowed researchers to interlink health, population and environmental data, thus enabling them to evaluate and quantify relationships between health-related variables and environmental risk factors at different geographical scales. The ability to access, share and utilize satellite and remote-sensing data has made possible even wider understanding of disease processes and of their links to the environment, an important consideration in the study of parasitic diseases. For example, disease prevention and control strategies resulting from investigations conducted in a GIS environment have been applied in many areas, particularly in Africa. However, there remain several challenges to a more widespread use of GIS technology, such as: limited access to GIS infrastructure, inadequate technical and analytical skills, and uneven data availability. Opportunities exist for international collaboration to address these limitations through knowledge sharing and governance.

  6. special article child health: past, present and future challenges

    African Journals Online (AJOL)

    among other things at ... in the planning of the new extensions to Korle Bu ... one ward (ward M) housed all the paediatric pa- ... Health Care Delivery to children by the Women Medi- .... Street, London to try to learn some paediatrics. ... career. Times indeed have changed, but there will al- ways be personal challenges for ...

  7. Present and future challenges of induced pluripotent stem cells.

    Science.gov (United States)

    Ohnuki, Mari; Takahashi, Kazutoshi

    2015-10-19

    Growing old is our destiny. However, the mature differentiated cells making up our body can be rejuvenated to an embryo-like fate called pluripotency which is an ability to differentiate into all cell types by enforced expression of defined transcription factors. The discovery of this induced pluripotent stem cell (iPSC) technology has opened up unprecedented opportunities in regenerative medicine, disease modelling and drug discovery. In this review, we introduce the applications and future perspectives of human iPSCs and we also show how iPSC technology has evolved along the way. © 2015 The Author(s).

  8. Remote maintenance challenges presented in the ITER engineering design

    International Nuclear Information System (INIS)

    Burgess, T.W.; Herndon, J.N.; Schrock, S.L.; Lousteau, D.C.

    1995-01-01

    Leading fusion energy research institutions are currently engaged in the Engineering Design Activity for the International Thermonuclear Experimental Reactor (ITER). A tokamak reactor design is evolving which emphasizes high system performance in a minimum overall reactor and building size. The resulting high component density dictates careful attention to ITER remote maintenance considerations in the development of the configuration. The complexity and scale of ITER remote maintenance tasks are well beyond the scope of today's experience and technology. This paper discusses the remote maintenance philosophy, describes the basic configuration as it relates to maintenance, and describes the basic procedures and equipment required. Key enabling technology research and development needs are also addressed

  9. Technological challenges at ITER plasma facing components production in Russia

    Energy Technology Data Exchange (ETDEWEB)

    Mazul, I.V., E-mail: mazuliv@niiefa.spb.su [Efremov Institute, 196641 St. Petersburg (Russian Federation); Belyakov, V.A.; Gervash, A.A.; Giniyatulin, R.N.; Guryeva, T.M.; Kuznetsov, V.E.; Makhankov, A.N.; Okunev, A.A. [Efremov Institute, 196641 St. Petersburg (Russian Federation); Sevryukov, O.N. [MEPhI, 115409 Moscow (Russian Federation)

    2016-11-01

    Highlights: • Technological aspects of ITER PFC manufacturing in Russia are presented. • Range of technologies to be used during manufacturing of ITER PFC at Efremov Institute has been, in general, defined and their complexity, originality and difficulty are described. • Some features and challenges of welding, brazing and various tests are discussed. - Abstract: Major part of ITER plasma facing components will be manufactured in the Russian Federation (RF). Operational conditions and other requirements to these components, as well as the scale of production, are quite unique. These unique features and related technological solutions found in the frame of the project are discussed. Procedure breakdown and results of qualification for the proposed technologies and potential producers are presented, based on mockups production and testing. Design of qualification mockups and prototypes, testing programs and results are described. Basic quantitative and qualitative parameters of manufactured components and methods of quality control are presented. Critical manufacturing issues and prospects for unique production for future fusion needs are discussed.

  10. Rogue athletes and recombinant DNA technology: challenges for doping control.

    Science.gov (United States)

    Azzazy, Hassan M E; Mansour, Mai M H

    2007-10-01

    The quest for athletic excellence holds no limit for some athletes, and the advances in recombinant DNA technology have handed these athletes the ultimate doping weapons: recombinant proteins and gene doping. Some detection methods are now available for several recombinant proteins that are commercially available as pharmaceuticals and being abused by dopers. However, researchers are struggling to come up with efficient detection methods in preparation for the imminent threat of gene doping, expected in the 2008 Olympics. This Forum article presents the main detection strategies for recombinant proteins and the forthcoming detection strategies for gene doping as well as the prime analytical challenges facing them.

  11. Food technology: challenge for health promotion.

    Science.gov (United States)

    Kwon, T W; Hong, J H; Moon, G S; Song, Y S; Kim, J I; Kim, J C; Kim, M J

    2004-01-01

    The food technology has brought countless benefits to today's food supply. Despite its many positive contributions, it has also brought unintended negative consequences. It is the time to mobilize the food technology to help the food supply more secure, safer and healthier, and here three possible approaches are foreseeable: First, we should continue to improve the conventional technologies. Many wholesome foods have been prepared and preserved using natural materials simply by fermentation. Second, we have to enhance the minimal processing as much as applicable. Third, new ingredients, intelligent packaging and functional foods should be explored to improve food supply and health. Today, consumer interest in the functional foods has been increased tremendously, and the future of food lies in the functional foods. However, the situations in the developing world are different from this. As food resource is limited in this region, food technology has to be emphasized to increase food supply. To help solve such complex problems, not only new technologies, but also conventional technologies have to be mobilized. Simultaneously, even higher technical capabilities have to be built up by applying new findings from the related disciplines to allow the food technology to play its vital role.

  12. Materials challenges in present and future wind energy

    DEFF Research Database (Denmark)

    Hayman, B.; Wedel-Heinen, J.; Brøndsted, Povl

    2008-01-01

    The main concept currently in use in wind energy involves horizontal-axis wind turbines with blades of fiber composite materials. This turbine concept is expected to remain as the major provider of wind power in the foreseeable future. However, turbine sizes are increasing, and installation......, preventing buckling failure, ensuring adequate fatigue life under variable wind loading combined with gravitational loading, and minimizing the occurrence and consequences of production defects. A major challenge is to develop cost-effective ways to ensure that production defects do not cause unacceptable...

  13. 66 THE CHALLENGES OF MIGRATION AND TECHNOLOGICAL ...

    African Journals Online (AJOL)

    Africa. Migration and African technological development have been two paradoxical or polarized ... slave trade, trafficking in human beings and ethnic cleansing. People .... It is also clear that development does not start with goods and things ...

  14. Technology in Parkinson's disease: Challenges and opportunities

    NARCIS (Netherlands)

    Espay, A.J.; Bonato, P.; Nahab, F.B.; Maetzler, W.; Dean, J.M.; Klucken, J.; Eskofier, B.M.; Merola, A.; Horak, F.; Lang, A.E.; Reilmann, R.; Giuffrida, J.; Nieuwboer, A.; Horne, M.; Little, M.A.; Litvan, I.; Simuni, T.; Dorsey, E.R.; Burack, M.A.; Kubota, K.; Kamondi, A.; Godinho, C.; Daneault, J.F.; Mitsi, G.; Krinke, L.; Hausdorff, J.M.; Bloem, B.R.; Papapetropoulos, S.

    2016-01-01

    The miniaturization, sophistication, proliferation, and accessibility of technologies are enabling the capture of more and previously inaccessible phenomena in Parkinson's disease (PD). However, more information has not translated into a greater understanding of disease complexity to satisfy

  15. Technology in Hospitality Industry: Prospects and Challenges

    OpenAIRE

    Kansakar, Prasanna; Munir, Arslan; Shabani, Neda

    2017-01-01

    The leisure and hospitality industry is one of the driving forces of the global economy. The widespread adoption of new technologies in this industry over recent years has fundamentally reshaped the way in which services are provided and received. In this paper, we explore some of the state-of-the-art technologies currently employed in the hospitality industry and how they are improving guest experiences and changing the hospitality service platform. We also envision some potential future hos...

  16. The petroleum challenge. Present day questions about oil and gas

    International Nuclear Information System (INIS)

    Boussena, S.; Locatelli, C.; Pauwels, J.P.; Swartenbroekx, C.

    2006-04-01

    Will the 21. century be the petroleum challenge century? The petroleum problem is no longer the affair of experts and journalists, it challenges also governments and consumers in pressing terms. If there is today a petroleum problem, there is no oil or gas shortage for the moment. The cumulated oil and gas reserves would allow to face the demand of the century, with the condition that investments in exploration, field development, production, and back-end of oil and gas industries will be done in time. This book, written by specialists of energy economics and geopolitics shows up some of the key questions of our energy future. In particular, it invites us to never forget the basic heavy trends of the hydrocarbons sector in order to never be trapped by superficial extrapolations of short term phenomena. Content: heavy trend of oil prices at the 2020 prospects, natural gas take over?; oil and gas geopolitics: enough of hydrocarbons for the 21. century; Russia and Caspian sea oil and gas weight; China: a new strategic actor of the energy scene; influence of 'futures' market, of speculation, and of stocks on hydrocarbon prices; which future for LNG?; natural gas in the USA: towards a new foreign dependence. (J.S.)

  17. Clean coal technology challenges for China

    Energy Technology Data Exchange (ETDEWEB)

    Mao, J. [Tsinghua University, Beijing (China). Dept. of Thermal Engineering

    2001-01-01

    China is rich in coal reserves and also the largest coal producer and consumer in the world. Coal constitutes over 70% of the total energy consumption, some 86% of coal production is burned directly, which causes serious air pollution problems. However, based on China's specific energy structure, coal utilisation will remain the dominant means of energy usage and clean coal technology must be the way forward if the environmental problems are to be resolved. This article discusses China's Clean Coal Technology Program, its implementation, including the clean coal technologies being developed and introduced, with reference to the key R & D institutes for each of the coal-using sectors. The article is an edited version of the 2000 Robens Coal Science Lecture, delivered in London in October 2000. The China Coal Technology Program for the 9th Five-Year Plan (1996-2000) was approved in 1997. The technologies included in the Program considered in this article are in: coal washing and grading, coal briquette, coal water slurry; circulating fluidised bed technology; pressurised fluidised bed combined cycle; integrated gasification combined cycle; coal gasification, coal liquefaction and flue gas desulfurisation. 4 tabs.

  18. Cell-based therapy technology classifications and translational challenges

    Science.gov (United States)

    Mount, Natalie M.; Ward, Stephen J.; Kefalas, Panos; Hyllner, Johan

    2015-01-01

    Cell therapies offer the promise of treating and altering the course of diseases which cannot be addressed adequately by existing pharmaceuticals. Cell therapies are a diverse group across cell types and therapeutic indications and have been an active area of research for many years but are now strongly emerging through translation and towards successful commercial development and patient access. In this article, we present a description of a classification of cell therapies on the basis of their underlying technologies rather than the more commonly used classification by cell type because the regulatory path and manufacturing solutions are often similar within a technology area due to the nature of the methods used. We analyse the progress of new cell therapies towards clinical translation, examine how they are addressing the clinical, regulatory, manufacturing and reimbursement requirements, describe some of the remaining challenges and provide perspectives on how the field may progress for the future. PMID:26416686

  19. Facing technological challenges of Solar Updraft Power Plants

    Science.gov (United States)

    Lupi, F.; Borri, C.; Harte, R.; Krätzig, W. B.; Niemann, H.-J.

    2015-01-01

    The Solar Updraft Power Plant technology addresses a very challenging idea of combining two kinds of renewable energy: wind and solar. The working principle is simple: a Solar Updraft Power Plant (SUPP) consists of a collector area to heat the air due to the wide-banded ultra-violet solar radiation, the high-rise solar tower to updraft the heated air to the atmosphere, and in between the power conversion unit, where a system of coupled turbines and generators transforms the stream of heated air into electric power. A good efficiency of the power plant can only be reached with extra-large dimensions of the tower and/or the collector area. The paper presents an up-to-date review of the SUPP technology, focusing on the multi-physics modeling of the power plant, on the structural behavior of the tower and, last but not least, on the modeling of the stochastic wind loading process.

  20. Extra Federal aid for minorities presents challenges for CBOs.

    Science.gov (United States)

    1998-11-27

    Congress awarded $156 million to deal with the HIV epidemic among African-Americans and other minorities. AIDS service providers welcomed the money but said that much more needs to be done. Community-based organizations (CBOs) serving minority populations are relatively new, and many need improved accounting and auditing procedures, information technology, and leadership development systems if they are to be productive. Hurdles faced by CBOs include competing for funding, recruiting volunteers, educating minority physicians, and planning community responses. The opinions of two former U.S. Surgeon Generals regarding this new funding and how it should be used are discussed.

  1. Proceedings of the Third Scientific Presentation on Reactor Safety Technology

    International Nuclear Information System (INIS)

    1998-01-01

    These proceedings contains the results of research and development on reactor safety technology which carried out by Reactor Safety Technology Centre, National Atomic Energy Agency, Serpong, Indonesia during 1997/1998 fiscal year. The presentation was held on 13-14 May 1998 at Serpong,Indonesia

  2. Proceeding of the Eighth Scientific Presentation on Nuclear Safety Technology

    International Nuclear Information System (INIS)

    Geni Rina Sunaryo; Sony Tjahjani, D.T.; Anhar Riza Antariksawan; Sudarno; Djoko Hari Nugroho; Roziq Himawan; Ari Satmoko; Histori; Sumijanto

    2003-02-01

    The Proceeding of Scientific Meeting and Presentation is routine activity that held in National Nuclear Energy Agency (BATAN) by Centre for Development of Nuclear Safety Technology for monitoring the research activity which was achieved in BATAN. The aims of the proceeding to able to information and reference for nuclear safety technology. There are 30 papers which separated index. (PPIN)

  3. Current status and challenges for automotive battery production technologies

    Science.gov (United States)

    Kwade, Arno; Haselrieder, Wolfgang; Leithoff, Ruben; Modlinger, Armin; Dietrich, Franz; Droeder, Klaus

    2018-04-01

    Production technology for automotive lithium-ion battery (LIB) cells and packs has improved considerably in the past five years. However, the transfer of developments in materials, cell design and processes from lab scale to production scale remains a challenge due to the large number of consecutive process steps and the significant impact of material properties, electrode compositions and cell designs on processes. This requires an in-depth understanding of the individual production processes and their interactions, and pilot-scale investigations into process parameter selection and prototype cell production. Furthermore, emerging process concepts must be developed at lab and pilot scale that reduce production costs and improve cell performance. Here, we present an introductory summary of the state-of-the-art production technologies for automotive LIBs. We then discuss the key relationships between process, quality and performance, as well as explore the impact of materials and processes on scale and cost. Finally, future developments and innovations that aim to overcome the main challenges are presented.

  4. Army Science & Technology: Problems and Challenges

    Science.gov (United States)

    2012-03-01

    Boundary Conditions: Who: Small Units is COIN/Stability Operations What: Provide affordable real-time translations and d t di f b h i f l i th t i...Soldiers, Leaders and Units in complex tactical operations exceeds the Army’s current capability for home-station Challenge: Formulate a S& T program...Formulate a S& T program to capture, process and electronically a vance rauma managemen . disseminate near-real-time medical information on Soldier

  5. Challenges in amorphous silicon solar cell technology

    NARCIS (Netherlands)

    Swaaij, van R.A.C.M.M.; Zeman, M.; Korevaar, B.A.; Smit, C.; Metselaar, J.W.; Sanden, van de M.C.M.

    2000-01-01

    Hydrogenated amorphous silicon is nowadays extensively used for a range of devices, amongst others solar cells, Solar cell technology has matured over the last two decades and resulted in conversion efficiencies in excess of 15%. In this paper the operation of amorphous silicon solar cells is

  6. PIXE in cultural heritage studies: present role and new challenges

    International Nuclear Information System (INIS)

    Calligaro, T.; Dran, J.-C.

    2013-01-01

    Full text: The non-destructive study of artistic and archaeological objects relies on the use of a large panel of modern analytical tools. Among them, PIXE plays a prominent role due to its almost unique combination of excellent analytical features in terms of sensitivity and accuracy combined with a non-destructive and even non-invasive character. the latter advantage stems from extensive instrumental progress - like the external beam - carried out since the advent of PIXE in the 1970s to account for the precious and unique nature of artworks and archaeological artifacts that preclude any sampling or damage. the situation has however evolved in the recent years as several competing techniques providing non-destructively the chemical composition have arisen, which more or less shake the privileged status of PIXE. On one hand, analytical techniques implemented with tabletop or movable XRF instruments have been massively developed, which allow in situ analysis and represent a progress in terms of artworks safety and flexibility of analysis. On the other hand, access to synchrotron radiation facilities is becoming easier and therefore the use of the powerful X-ray absorption techniques (XANES, EXAFS), that add chemical environment information to the elemental analysis, is progressively gaining popularity. Considering these trends, it seems important to reassess the place of PIXE in the field of art and archaeology and to underline its specific assets. the aim of this article is to pinpoint the situation where PIXE is the best analytical tool with regard to the specificity of art and archaeological items and to stress the new challenges it will have to face. Case studies carried out with the AGLAE facility of the C2RMF will illustrate the situations where PIXE exhibits specific advantages: Light element measurement. The high ionization cross section of light elements by charged particles favors the accurate measurement of sodium, magnesium, aluminum and silicon, whose

  7. PIXE in cultural heritage studies: present role and new challenges

    Energy Technology Data Exchange (ETDEWEB)

    Calligaro, T.; Dran, J.-C. [Centre de Recherche et de Restauration des Musées de France, Palais du Louvre, Paris (France)

    2013-07-01

    Full text: The non-destructive study of artistic and archaeological objects relies on the use of a large panel of modern analytical tools. Among them, PIXE plays a prominent role due to its almost unique combination of excellent analytical features in terms of sensitivity and accuracy combined with a non-destructive and even non-invasive character. the latter advantage stems from extensive instrumental progress - like the external beam - carried out since the advent of PIXE in the 1970s to account for the precious and unique nature of artworks and archaeological artifacts that preclude any sampling or damage. the situation has however evolved in the recent years as several competing techniques providing non-destructively the chemical composition have arisen, which more or less shake the privileged status of PIXE. On one hand, analytical techniques implemented with tabletop or movable XRF instruments have been massively developed, which allow in situ analysis and represent a progress in terms of artworks safety and flexibility of analysis. On the other hand, access to synchrotron radiation facilities is becoming easier and therefore the use of the powerful X-ray absorption techniques (XANES, EXAFS), that add chemical environment information to the elemental analysis, is progressively gaining popularity. Considering these trends, it seems important to reassess the place of PIXE in the field of art and archaeology and to underline its specific assets. the aim of this article is to pinpoint the situation where PIXE is the best analytical tool with regard to the specificity of art and archaeological items and to stress the new challenges it will have to face. Case studies carried out with the AGLAE facility of the C2RMF will illustrate the situations where PIXE exhibits specific advantages: Light element measurement. The high ionization cross section of light elements by charged particles favors the accurate measurement of sodium, magnesium, aluminum and silicon, whose

  8. Nanotechnology risk perceptions and communication: emerging technologies, emerging challenges.

    Science.gov (United States)

    Pidgeon, Nick; Harthorn, Barbara; Satterfield, Terre

    2011-11-01

    Nanotechnology involves the fabrication, manipulation, and control of materials at the atomic level and may also bring novel uncertainties and risks. Potential parallels with other controversial technologies mean there is a need to develop a comprehensive understanding of processes of public perception of nanotechnology uncertainties, risks, and benefits, alongside related communication issues. Study of perceptions, at so early a stage in the development trajectory of a technology, is probably unique in the risk perception and communication field. As such it also brings new methodological and conceptual challenges. These include: dealing with the inherent diversity of the nanotechnology field itself; the unfamiliar and intangible nature of the concept, with few analogies to anchor mental models or risk perceptions; and the ethical and value questions underlying many nanotechnology debates. Utilizing the lens of social amplification of risk, and drawing upon the various contributions to this special issue of Risk Analysis on Nanotechnology Risk Perceptions and Communication, nanotechnology may at present be an attenuated hazard. The generic idea of "upstream public engagement" for emerging technologies such as nanotechnology is also discussed, alongside its importance for future work with emerging technologies in the risk communication field. © 2011 Society for Risk Analysis.

  9. Using Technology to Meet the Challenges of Medical Education.

    Science.gov (United States)

    Guze, Phyllis A

    2015-01-01

    Medical education is rapidly changing, influenced by many factors including the changing health care environment, the changing role of the physician, altered societal expectations, rapidly changing medical science, and the diversity of pedagogical techniques. Changes in societal expectations put patient safety in the forefront, and raises the ethical issues of learning interactions and procedures on live patients, with the long-standing teaching method of "see one, do one, teach one" no longer acceptable. The educational goals of using technology in medical education include facilitating basic knowledge acquisition, improving decision making, enhancement of perceptual variation, improving skill coordination, practicing for rare or critical events, learning team training, and improving psychomotor skills. Different technologies can address these goals. Technologies such as podcasts and videos with flipped classrooms, mobile devices with apps, video games, simulations (part-time trainers, integrated simulators, virtual reality), and wearable devices (google glass) are some of the techniques available to address the changing educational environment. This article presents how the use of technologies can provide the infrastructure and basis for addressing many of the challenges in providing medical education for the future.

  10. Delayed presentation of turner syndrome: Challenge to optimal management

    Directory of Open Access Journals (Sweden)

    Uma Kaimal Saikia

    2017-01-01

    Full Text Available Background: Turner syndrome (TS is a chromosomal disorder associated with dysmorphic features and comorbidities, with recent trends focusing on early diagnosis for adequate management. Aim: The aim is to study the age and mode of presentation of TS, associated comorbidities and look for any correlation with the genotype. Material and Methods: This was a retrospective analysis of girls with TS attending the endocrinology clinic of a tertiary care center. Their age, mode of presentation, and clinical features were noted. All participants underwent ear examination, echocardiography, and ultrasonography of the abdomen. Laboratory investigations included serum T4, thyroid-stimulating hormone, thyroid peroxidase antibodies, follicle-stimulating hormone, fasting, and 2-h plasma glucose after 75 g glucose load and a karyotype. Simple descriptive statistical methods were used. Results: Seventeen cases of TS were seen with a median age of presentation of 18 years (range 14–42 years. Primary amenorrhea was the most common reason for seeking medical attention (76.4% followed by short stature and diabetes mellitus (11.8% each. The mean height at presentation was 137.5 ± 5.4 cm. Monosomy of X chromosome (45,X was the most common karyotype obtained in 58.8% of the patients, followed by 45,X/46, XX in 17.6%, 45,X/46X,i(X(q10 in 11.8%, and 45,X/47,XXX and 46X,delXp11.2 in 5.9% patients each. Bicuspid aortic valve was seen in two patients having a 45,X/46,XX karyotype. Conclusion: Primary amenorrhea is the most common presenting feature in girls with TS leading to a delayed age of presentation. Short stature and dysmorphic features are often overlooked in infancy and childhood due to socioeconomic factors. This late age of presentation is a cause of concern as early detection and management is important for height outcomes, bone health, and psychosocial support. Assessment of comorbidities becomes important in this setting.

  11. Polymer Solidification Technology - Technical Issues and Challenges

    International Nuclear Information System (INIS)

    Jensen, Charles; Kim, Juyoul

    2010-01-01

    Many factors come into play, most of which are discovered and resolved only during full-scale solidification testing of each of the media commonly used in nuclear power plants. Each waste stream is unique, and must be addressed accordingly. This testing process is so difficult that Diversified's Vinyl Ester Styrene and Advanced Polymer Solidification are the only two approved processes in the United States today. This paper summarizes a few of the key obstacles that must be overcome to achieve a reliable, repeatable process for producing an approved Stable Class B and C waste form. Before other solidification and encapsulation technologies can be considered compliant with the requirements of a Stable waste form, the tests, calculations and reporting discussed above must be conducted for both the waste form and solidification process used to produce the waste form. Diversified's VERI TM and APS TM processes have gained acceptance in the UK. These processes have also been approved and gained acceptance in the U. S. because we have consistently overcome technical hurdles to produce a complaint product. Diversified Technologies processes are protected intellectual property. In specific instances, we have patents pending on key parts of our process technology

  12. Challenges in hardening technologies using shallow-trench isolation

    International Nuclear Information System (INIS)

    Shaneyfelt, M.R.; Dodd, P.E.; Draper, B.L.; Flores, R.S.

    1998-02-01

    Challenges related to radiation hardening CMOS technologies with shallow-trench isolation are explored. Results show that trench hardening can be more difficult than simply replacing the trench isolation oxide with a hardened field oxide

  13. Regulatory Challenges for Cartilage Repair Technologies.

    Science.gov (United States)

    McGowan, Kevin B; Stiegman, Glenn

    2013-01-01

    In the United States, few Food and Drug Administration (FDA)-approved options exist for the treatment of focal cartilage and osteochondral lesions. Developers of products for cartilage repair face many challenges to obtain marketing approval from the FDA. The objective of this review is to discuss the necessary steps for FDA application and approval for a new cartilage repair product. FDA Guidance Documents, FDA Panel Meetings, scientific organization recommendations, and clinicaltrials.gov were reviewed to demonstrate the current thinking of FDA and the scientific community on the regulatory process for cartilage repair therapies. Cartilage repair therapies can receive market approval from FDA as medical devices, drugs, or biologics, and the specific classification of product can affect the nonclinical, clinical, and regulatory strategy to bring the product to market. Recent FDA guidance gives an outline of the required elements to bring a cartilage repair product to market, although these standards are often very general. As a result, companies have to carefully craft their study patient population, comparator group, and clinical endpoint to best showcase their product's attributes. In addition, regulatory strategy and manufacturing process validation need to be considered early in the clinical study process to allow for timely product approval following the completion of clinical study. Although the path to regulatory approval for a cartilage repair therapy is challenging and time-consuming, proper clinical trial planning and attention to the details can eventually save companies time and money by bringing a product to the market in the most expeditious process possible.

  14. Exploring Challenges and Opportunities for Eco-Feedback Technology

    DEFF Research Database (Denmark)

    Verdezoto, Nervo

    This position paper explores challenges and opportunities for eco-feedback technology. Drawing on two design cases, I discuss the importance of supporting active participation as well as the articulation of work in everyday practices to facilitate reduction of consumption.......This position paper explores challenges and opportunities for eco-feedback technology. Drawing on two design cases, I discuss the importance of supporting active participation as well as the articulation of work in everyday practices to facilitate reduction of consumption....

  15. Challenges to the Indicators on Science, Technology and Innovation Development

    OpenAIRE

    Chobanova, Rossitsa

    2006-01-01

    The paper attempts to define the challenges to the indicators on science, technology and innovation development which result from the contemporary dynamics of the global knowledge based economy progress and the pursued challenges of identification of the specific national priority dimensions for public funding research and innovation projects on the case of Bulgaria. It is argued that recent the most widespread methodologies of positioning science, technology and innovation indicators do not ...

  16. Myofibrillar myopathies: State of the art, present and future challenges.

    Science.gov (United States)

    Béhin, A; Salort-Campana, E; Wahbi, K; Richard, P; Carlier, R-Y; Carlier, P; Laforêt, P; Stojkovic, T; Maisonobe, T; Verschueren, A; Franques, J; Attarian, S; Maues de Paula, A; Figarella-Branger, D; Bécane, H-M; Nelson, I; Duboc, D; Bonne, G; Vicart, P; Udd, B; Romero, N; Pouget, J; Eymard, B

    2015-10-01

    Myofibrillar myopathies (MFM) have been described in the mid-1990s as a group of diseases sharing common histological features, including an abnormal accumulation of intrasarcoplasmic proteins, the presence of vacuoles and a disorganization of the intermyofibrillar network beginning at the Z-disk. The boundaries of this concept are still uncertain, and whereas six genes (DES, CRYAB, LDB3/ZASP, MYOT, FLNC and BAG3) are now classically considered as responsible for MFM, other entities such as FHL1 myopathy or Hereditary Myopathy with Early Respiratory Failure linked to mutations of titin can now as well be included in this group. The diagnosis of MFM is not always easy; as histological lesions can be focal, and muscle biopsy may be disappointing; this has led to a growing importance of muscle imaging, and the selectivity of muscle involvement has now been described in several disorders. Due to the rarity of these myopathies, if some clinical patterns (such as distal myopathy associated with cardiomyopathy due to desmin mutations) are now well known, surprises remain possible and should lead to systematic testing of the known genes in case of a typical histological presentation. In this paper, we aim at reviewing the data acquired on the six main genes listed above as well as presenting the experience from two French reference centres, Paris and Marseilles. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  17. Technology challenges in small animal PET imaging

    International Nuclear Information System (INIS)

    Lecomte, Roger

    2004-01-01

    Positron Emission Tomography (PET) is a non-invasive nuclear imaging modality allowing biochemical processes to be investigated in vivo with sensitivity in the picomolar range. For this reason, PET has the potential to play a major role in the emerging field of molecular imaging by enabling the study of molecular pathways and genetic processes in living animals non-invasively. The challenge is to obtain a spatial resolution that is appropriate for rat and mouse imaging, the preferred animal models for research in biology, while achieving a sensitivity adequate for real-time measurement of rapid dynamic processes in vivo without violating tracer kinetic principles. An overview of the current state of development of dedicated small animal PET scanners is given, and selected applications are reported and discussed with respect to performance and significance to research in biology

  18. Division of Agro technology and Biosciences: Past, Present and Future

    International Nuclear Information System (INIS)

    Khairuddin Abdul Rahim

    2012-01-01

    In presenter speech, he outlined several topics regarding development of Agro technology and Biosciences Division from 31 years ago. This division started with Unit Sains Hidupan Liar under PUSPATI in 1981 and change their names to Program Isotop dan Sinaran dalam Biologi dan Pertanian under Nuclear Technology Unit (UTN) (1983). In 1990 their premise change to MINT-Tech Park. This program responsible for conducting research in agro technology using nuclear technology. Several achievements achieved by this division since established. They also succeed in mutating banana namely Novaria banana (1994), Tongkat Ali rice (1990), ground nut (2003), orchids, organic fertilizer and foliage in 2000. The vision of this division are to promote and enhance innovation and applications in nuclear technology to achieve security in food productivity, safety and quality and ecological awareness for economics competitiveness and vibrancy in agrobioindustry and community development. (author)

  19. Radioactive contamination in Arctic - present situation and future challenges

    International Nuclear Information System (INIS)

    Strand, Per

    2002-01-01

    There is currently a focus on radioactivity and the Arctic region. The reason for this is probably the high number of nuclear sources in parts of the Arctic and the vulnerability of Arctic systems to radioactive contamination. The Arctic environment is also perceived as a wilderness and the need for the protection of this wilderness against contamination is great. In the last decade information has also been released concerning the nuclear situation which has caused concern in many countries. Due to such concerns, the International Arctic Environmental Protection Strategy (IAEPS) was launched in 1991 and the Arctic Monitoring and Assessment Programme (AMAP) was established. AMAP is undertaking an assessment of the radioactive contamination of the Arctic and its radiological consequences. In 1996 IAEPS became part of the Arctic Council. AMAP presented one main report in 1997 and another in 1998. There are also several other national, bilateral and international programmes in existence which deal with this issue. This paper summarises some of current knowledge about sources of radioactive contamination, vulnerability, exposure of man, and potential sources for radioactive contamination within Arctic and some views on the future needs for work concerning radioactivity in Arctic. (au)

  20. Unhealthy travelers present challenges to sustainable primate ecotourism.

    Science.gov (United States)

    Muehlenbein, Michael P; Martinez, Leigh Ann; Lemke, Andrea A; Ambu, Laurentius; Nathan, Senthilvel; Alsisto, Sylvia; Sakong, Rosman

    2010-05-01

    Ecotourism can function as a powerful tool for species conservation. However, a significant proportion of travelers at wildlife sanctuaries may be ill and potentially infectious, creating unnecessary risk of pathogen transmission to wildlife. A questionnaire was distributed to adult visitors at the Sepilok Orangutan Rehabilitation Centre, Sabah, Malaysia. The questionnaire recorded age, occupation, region of origin, history of recent travel, recent contact with livestock, domestic and wild animals, and diagnoses/symptoms of various infections. 15% of the 633 tourists self-reported at least one of the following current symptoms: cough, sore throat, congestion, fever, diarrhea and vomiting. Participants who reported recent animal contact were significantly more likely to report current respiratory symptoms compared to other participants. Likewise, participants with a medical-related occupation were more likely to report current respiratory symptoms while at Sepilok compared to other participants. Despite being ill and potentially infectious, these tourists were visiting a wildlife sanctuary to view endangered species. Many of these visitors had animal contact immediately prior to arriving, and many had at least some basic knowledge about infection transmission. While participants in nature-based tourism are generally concerned about environmental protection, present analyses suggest that a significant proportion of ecotourists are uninformed of the risks they may pose to non-human animal health. Copyright 2010 Elsevier Ltd. All rights reserved.

  1. Present state and future of new energy technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kitamura, N

    1976-08-01

    The Sunshine Project was begun in 1973 by the Japanese Ministry of Industry to investigate all alternative energy sources other than nuclear. The project is subdivided into four separate areas, those being solar energy, geothermal energy, liquefaction and gasification of coal, and hydrogen fuel. This article describes the present state of these technologies and their probable future development. Although hydrogen fuel and coal liquefaction/gasification are still in the basic research stage solar and geothermal technologies are already well developed.

  2. Presentation of the 10. European Event on Technology: technologies for a sustainable development; Presentation des 10. Entretiens Europeens de la Technologie: technologies pour un developpement durable

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-11-01

    The European Event on Technology (EET), is a major meeting on technologies, their evolution and their industrial and social implications. In less than a decade, sustainable development has become both an economic and a political priority. It was urgent and legitimate that those who are the mainsprings should take hold of the subject and give it technological content, estimate its costs and define clear timetables. The debates consist of: plenary sessions on environmental, social and economic stakes of sustainable development and the challenges for, and commitment of engineers, managers and politicians with respect to these goals; and workshops, which provide an overview on recently acquired or upcoming technologies developed by sector. These proceedings present several technologies of interest for the energy and environment sectors: Energy efficiency of buildings: towards energy autonomy; superconductors enable in new millennium for electric power industry; advanced gas micro-turbine-driven generator technology; environmental and technical challenges of an offshore wind farm; future nuclear energy system; transports and propulsion systems: modelling combustion in engines: progress and prospects for reducing emissions; on-board computers: reduction in consumption and emissions of engine-transmission units for vehicles; polymer-lithium batteries: perspectives for zero-emission traction; hybrid vehicles and energy/environmental optimization: paths and opportunities; fuel cells and zero-emission: perspectives and developments; urban goods transport: towards a drop in congestion and nuisance; new hybrid propulsion for buses: energy/environmental optimization; Tram-train: city-suburbs concept without transshipment; safety: computerization in controlling nuclear power plant processes (EPR architecture); refractory materials: a key factor for the increase in aero-turbo-engines output; the contribution of waste processing to the production of greenhouse gases; waste as a

  3. Presentations of the CONRAD tailings seminar : exploring the past, present and future of tailings technologies

    International Nuclear Information System (INIS)

    2004-01-01

    This symposium explored oil sand tailings activities in Canada and their associated technologies. It was attended by active and prospective tailings researchers and developers of tailings technology who addressed timely issues regarding mature fine tailings, consolidated tailings, thickened tailings, and emerging tailings technologies. The collaborative research projects that are underway at the Oil Sands Tailings Research Facility were also discussed along with other topics such as tailings ponds management, water treatment, water quality and water supply security. All 16 presentations featured at this conference were indexed separately for inclusion in this database

  4. Challenge of Effective Technology Integration into Teaching and Learning

    Science.gov (United States)

    Ramorola, M. Z.

    2013-01-01

    South African teachers are faced with challenges in integrating technology effectively into a coherent framework at school level. There seems to be little evidence of technology integration into classroom activities such as systematic planning and implementation of lessons that require learners to think critically, work collaboratively, and use…

  5. Multigenerational organisations: a challenge for technology and social change

    NARCIS (Netherlands)

    Millar-Schijf, Carla C.J.M.; Lockett, Martin

    2014-01-01

    This paper analyses demographic and organisational trends associated with an ageing workforce and introduces the articles in the special issue of Technological Forecasting and Social Change on Ageing2Agility: Multi-stakeholder Technological Forecasting for the Multi-generational Challenges in the

  6. Challenges and Opportunities Facing Technology Education in Taiwan

    Science.gov (United States)

    Lee, Lung-Sheng Steven

    2009-01-01

    The technology education in Taiwan is prescribed in the national curriculum and provided to all students in grades 1-12. However, it faces the following challenges: (1) Lack of worthy image, (2) Inadequate teachers in elementary schools, (3) Deficient teaching vitality in secondary schools, and (4) Diluted technology teacher education programs. In…

  7. Engagement and Uncertainty: Emerging Technologies Challenge the Work of Engagement

    Science.gov (United States)

    Eaton, Weston; Wright, Wynne; Whyte, Kyle; Gasteyer, Stephen P.; Gehrke, Pat J.

    2014-01-01

    Universities' increasing applications of science and technology to address a wide array of societal problems may serve to thwart democratic engagement strategies. For emerging technologies, such challenges are particularly salient, as knowledge is incomplete and application and impact are uncertain or contested. Insights from science and…

  8. Challenges of Massive Application of Information Technologies in ...

    African Journals Online (AJOL)

    Effective diffusion of information technology and related initiatives in African Universities is hindered by various barriers. The paper investigated the challenges of massive application of information technology (IT) in Niger Delta universities in Nigeria. The research design was survey design, while the population consisted of ...

  9. Challenges of technological trends in nursing and coping strategies ...

    African Journals Online (AJOL)

    Background: Technology in nursing has been shown to reduce redundancy and improve efficiency of work. Information Communication and technology (ICT) incorporation in nursing at Kenyatta national Hospital (KNH) has been ongoing for some years yet the uptake seemingly is slow. Challenges that could be associated ...

  10. High-Altitude Platforms - Present Situation and Technology Trends

    Directory of Open Access Journals (Sweden)

    Flavio Araripe D'Oliveira

    2016-07-01

    Full Text Available High-altitude platforms (HAPs are aircraft, usually unmanned airships or airplanes positioned above 20 km, in the stratosphere, in order to compose a telecommunications network or perform remote sensing. In the 1990 and 2000 decades, several projects were launched, but very few had continued. In 2014, 2 major Internet companies (Google and Facebook announced investments in new HAP projects to provide Internet access in regions without communication infrastructure (terrestrial or satellite, bringing back attention to the development of HAP. This article aims to survey the history of HAPs, the current state-of-the-art (April 2016, technology trends and challenges. The main focus of this review will be on technologies directly related to the aerial platform, inserted in the aeronautical engineering field of knowledge, not detailing aspects of the telecommunications area.

  11. Innovation in surgical technology and techniques: Challenges and ethical issues.

    Science.gov (United States)

    Geiger, James D; Hirschl, Ronald B

    2015-06-01

    The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Technology transfer from accelerator laboratories (challenges and opportunities)

    International Nuclear Information System (INIS)

    Verma, V.K.; Gardner, P.L.

    1994-06-01

    It is becoming increasingly evident that technology transfer from research laboratories must be a key element of their comprehensive strategic plans. Technology transfer involves using a verified and organized knowledge and research to develop commercially viable products. Management of technology transfer is the art of organizing and motivating a team of scientists, engineers and manufacturers and dealing intelligently with uncertainties. Concurrent engineering is one of the most effective approaches to optimize the process of technology transfer. The challenges, importance, opportunities and techniques of transferring technology from accelerator laboratories are discussed. (author)

  13. Addressing professional resource challenges facing modern utilities with technological solutions

    Energy Technology Data Exchange (ETDEWEB)

    Goldie, T. [Hydro One Networks Inc., Toronto, ON (Canada); Hodder, S. [GE Digital Energy, Toronto, ON (Canada)

    2008-07-01

    The challenges facing electric utilities regarding a shortage of highly qualified labour to maintain, refurbish and expand electrical infrastructure can be attributed to a wave of retirements in skilled employees, a shortage of entry-level workers and a rapidly increasing workload caused by investment in electricity infrastructure. Two solutions were presented for finding and sustaining an adequate personnel base. The first involved developing local talent, both entry-level and mid-career staff to ensure that work continuity and workplace safety are maintained. The second involved the implementation of technological solutions to help optimize the use of existing and future labour resources. This paper presented the human resource programs developed by Hydro One, the largest electrical transmission and distribution utility in the province of Ontario. Their initiatives include raising the profile of the utility work environment through strategic partnerships with educational institutions and developing in house offerings to supplement existing academic programs. This paper also presented a technical solution to address the resources challenges specifically associated with power system protection and control. The solution targets professional and skilled trades involved in the design, installation and maintenance of automated substations and protection and control systems. It is based on the premise that resource optimization can be achieved by reducing inconsistent design and construction practices and replacing these designs with highly standardized materials with digital communications using IEC 61850. This new technology should attract young professionals to the power engineering field while still maintaining a high comfort level with the established professional workforce. 5 refs., 4 figs.

  14. Technology Infusion Challenges from a Decision Support Perspective

    Science.gov (United States)

    Adumitroaie, V.; Weisbin, C. R.

    2009-01-01

    In a restricted science budget environment and increasingly numerous required technology developments, the technology investment decisions within NASA are objectively more and more difficult to make such that the end results are satisfying the technical objectives and all the organizational constraints. Under these conditions it is rationally desirable to build an investment portfolio, which has the highest possible technology infusion rate. Arguably the path to infusion is subject to many influencing factors, but here only the challenges associated with the very initial stages are addressed: defining the needs and the subsequent investment decision-support process. It is conceivable that decision consistency and possibly its quality suffer when the decision-making process has limited or no traceability. This paper presents a structured decision-support framework aiming to provide traceable, auditable, infusion- driven recommendations towards a selection process in which these recommendations are used as reference points in further discussions among stakeholders. In this framework addressing well-defined requirements, different measures of success can be defined based on traceability to specific selection criteria. As a direct result, even by using simplified decision models the likelihood of infusion can be probed and consequently improved.

  15. Green energy technologies: challenges & opportunities for Africa

    CSIR Research Space (South Africa)

    Bischof-Niemz, T

    2015-09-01

    Full Text Available This presentation looks at the status of the South African energy industry today. Solar PV & wind are the cheapest new-build options per kWh in South Africa, and cost competitiveness of renewables has two consequences: 1) distributed power...

  16. Position paper persuasive technologies in challenging contexts

    NARCIS (Netherlands)

    Boer, de J. (Johannes)

    2014-01-01

    This paper, presented at the Persuasive Conference 2014 (21-23 May, Padua, Italy) describes an experiment in which the particpants daily received a SMS message. De SMS message was meant was meant to trigger participants on safety awareness, cleaning behaviour, and quick and instant tasks.

  17. The gas turbine: Present technology and future developments

    International Nuclear Information System (INIS)

    Minghetti, E.

    1997-03-01

    The gas turbine is the most widely used prime mover all over the world for either power generation or mechanical drive applications. The above fact is due to the recent great improvements that have been done especially in terms of efficiency, availability and reliability. The future for gas turbine technological development looks very promising. In fact, although tremendous growth has already taken place, there is still the potential for dramatic improvements in performance. Compared with the competitive prime movers (conventional steam power plants and reciprocating piston engines) the gas turbine technology is younger and still following a strong growth curve. The coming decades will witness the continued increasing in turbine inlet temperature, the development of new materials and refrigeration systems and the commercialization of inter cooled system and steam cooled turbines. With the very soon introduction of the G and H technology, expected single and combined cycle efficiencies for heavy duty machines are respectively 40% and 60%, while maintaining 'single digit' levels in pollutant emissions. In this report are given wide information on gas turbine present technology (Thermodynamics, features, design, performances, emission control, applications) and are discussed the main lines for the future developments. Finally are presented the research and technological development activities on gas turbine of Italian National Agency for new Technology Energy and the Environment Energy Department

  18. Position paper persuasive technologies in challenging contexts

    OpenAIRE

    Boer, de, J. (Johannes)

    2014-01-01

    This paper, presented at the Persuasive Conference 2014 (21-23 May, Padua, Italy) describes an experiment in which the particpants daily received a SMS message. De SMS message was meant was meant to trigger participants on safety awareness, cleaning behaviour, and quick and instant tasks. The experiment was part of the Safety at Work project of Saxion University of Applied Sciences.

  19. Virtual Reality in Presentation of the Underground Mine Technological Process

    Directory of Open Access Journals (Sweden)

    Kodym Oldøich

    2003-09-01

    Full Text Available Virtual Reality in Presentation of the Underground Mine Technological Process focuses on methods of presentation of an underground mine technologies in intranet technology. It shows usage of platform independent VRML client for presentation of static and dynamic information about technological process. Bi-directional interactions between client and process information database are solved.Based on analysis of technological process of underground mine a database structure was designed. It is skeleton for storing all information about any underground mine. This skeleton can be modified in any direction. Data in this "static model" of underground mine can be applied for visualization in VRML environment. In this way it is possible to simplify and unify a user's front-end for all kinds of tasks.All designed scenes can be interactively displayed in full view or in any detail view, so that a user is able to recognize every important part of installed equipment, its stage, technical parameters and other information. If manufacturers of mining equipment will supply VRML model of their real products everybody would be able to place it into VRML scene and learn everything about it.This work explores and tries to enlighten some of the areas and available approaches compliant with VRML 97 specification of modifying static scene by its browser. Concepts of animation pipeline, inside and outside scripting in scene displayed and authoring of VRML targeted geometry are discussed including database connectivity.

  20. Presentations of the PTAC wireless, telecommunications and e-business technology conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This conference was attended by experts in the telecommunications industry who demonstrated how the petroleum industry can reduce costs and improve profitability through innovative wireless, telecommunications and e-business technology solutions. The conference was divided into two main sessions, featuring field operation presentations and head office presentations. Current technologies and success stories and challenges were presented for exploration, drilling, completions and production operations. The conference featured 16 presentations, of which 12 have been indexed separately for inclusion in this database. refs., tabs., figs.

  1. Student-Led Presentations "in Situ": The Challenges to Presenting on the Edge of a Volcano

    Science.gov (United States)

    Marvell, Alan

    2008-01-01

    Student-led seminars are commonplace within higher education but few are allowed the opportunity of being delivered in situ. Presentations in situ widen the experience of students and develop a range of transferable skills, encouraging a greater sense of place and facilitating reflective learning. This case study describes the experiences of a…

  2. Digital Technology and Mental Health Interventions: Opportunities and Challenges

    Directory of Open Access Journals (Sweden)

    Aguilera, Adrian

    2015-02-01

    Full Text Available The growth of the Internet, mobile phones, social media and other digital technologies has changed our world in many ways. It has provided individuals with information that was previously only available to a select few. An example of the reach of technology is data that as of October 2012, there are over 6 billion phones worldwide (BBC, 2012. The availability of data in real time has presented hopes of intervening more efficiently and managing health problems by leveraging limited human resources. It also has an impact in changing the roles of providers and patients and in legal and ethical issues including privacy in digital health interactions. This paper will discuss why digital technology has received recent attention in the area of mental health, present some applications of technology for mental health to date, explore the challenges to full implementation in clinical settings, and present future opportunities for digital technologies.El crecimiento del Internet, los teléfonos móviles, las redes sociales y otras tecnologías digitales ha cambiado nuestro mundo de muchas maneras. Ha proporcionado a las personas con la información que antes sólo estaba disponible para un grupo selecto, por ejemplo a partir de octubre de 2012. Un ejemplo del alcance de la tecnología son los datos que dicen que hay más de 6 millones de teléfonos en todo el mundo (BBC, 2012. La disponibilidad de los datos en tiempo real a presentado la esperanza de intervenir de manera más eficiente y manejar los problemas de salud los recursos humanos limitados. También tiene un impacto en el cambio de los roles de los proveedores y los pacientes y en aspectos legales y éticos, incluyendo la privacidad en las interacciones de salud digital. Este artículo discutirá unas razones por cual la tecnología digital ha recibido atención recientemente en el área de salud mental, presentará algunas aplicaciones de la tecnología para mejorar la salud mental hasta la fecha

  3. Head-Disk Interface Technology: Challenges and Approaches

    Science.gov (United States)

    Liu, Bo

    Magnetic hard disk drive (HDD) technology is believed to be one of the most successful examples of modern mechatronics systems. The mechanical beauty of magnetic HDD includes simple but super high accuracy positioning head, positioning technology, high speed and stability spindle motor technology, and head-disk interface technology which keeps the millimeter sized slider flying over a disk surface at nanometer level slider-disk spacing. This paper addresses the challenges and possible approaches on how to further reduce the slider disk spacing whilst retaining the stability and robustness level of head-disk systems for future advanced magnetic disk drives.

  4. Health technology assessment in Iran: challenges and views

    Science.gov (United States)

    Olyaeemanesh, Alireza; Doaee, Shila; Mobinizadeh, Mohammadreza; Nedjati, Mina; Aboee, Parisa; Emami-Razavi, Seyed Hassan

    2014-01-01

    Background: Various decisions have been made on technology application at all levels of the health system in different countries around the world. Health technology assessment is considered as one of the best scientific tools at the service of policy- makers. This study attempts to investigate the current challenges of Iran’s health technology assessment and provide appropriate strategies to establish and institutionalize this program. Methods: This study was carried out in two independent phases. In the first, electronic databases such as Medline (via Pub Med) and Scientific Information Database (SID) were searched to provide a list of challenges of Iran’s health technology assessment. The views and opinions of the experts and practitioners on HTA challenges were studied through a questionnaire in the second phase which was then analyzed by SPSS Software version 16. This has been an observational and analytical study with a thematic analysis. Results: In the first phase, seven papers were retrieved; from which, twenty- two HTA challenges in Iran were extracted by the researchers; and they were used as the base for designing a structured questionnaire of the second phase. The views of the experts on the challenges of health technology assessment were categorized as follows: organizational culture, stewardship, stakeholders, health system management, infrastructures and external pressures which were mentioned in more than 60% of the cases and were also common in the views. Conclusion: The identification and prioritization of HTA challenges which were approved by those experts involved in the strategic planning of the Department of Health Technology Assessment will be a step forward in the promotion of an evidence- based policy- making and in the production of comprehensive scientific evidence. PMID:25695015

  5. Nuclear Fuel Cycle Technologies: Current Challenges and Future Plans - 12558

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, Andrew [U.S. Department of Energy, Washington, DC (United States)

    2012-07-01

    The mission of the Office of Nuclear Energy's Fuel Cycle Technologies office (FCT program) is to provide options for possible future changes in national nuclear energy programs. While the recent draft report of the Blue Ribbon Commission on America's Nuclear Future stressed the need for organization changes, interim waste storage and the establishment of a permanent repository for nuclear waste management, it also recognized the potential value of alternate fuel cycles and recommended continued research and development in that area. With constrained budgets and great expectations, the current challenges are significant. The FCT program now performs R and D covering the entire fuel cycle. This broad R and D scope is a result of the assignment of new research and development (R and D) responsibilities to the Office of Nuclear Energy (NE), as well as reorganization within NE. This scope includes uranium extraction from seawater and uranium enrichment R and D, used nuclear fuel recycling technology, advanced fuel development, and a fresh look at a range of disposal geologies. Additionally, the FCT program performs the necessary systems analysis and screening of fuel cycle alternatives that will identify the most promising approaches and areas of technology gaps. Finally, the FCT program is responsible for a focused effort to consider features of fuel cycle technology in a way that promotes nonproliferation and security, such as Safeguards and Security by Design, and advanced monitoring and predictive modeling capabilities. This paper and presentation will provide an overview of the FCT program R and D scope and discuss plans to analyze fuel cycle options and support identified R and D priorities into the future. The FCT program is making progress in implanting a science based, engineering driven research and development program that is evaluating options for a sustainable fuel cycle in the U.S. Responding to the BRC recommendations, any resulting legislative

  6. Privacy and technology challenges for ubiquitous social networking

    DEFF Research Database (Denmark)

    Sapuppo, Antonio; Seet, Boon-Chong

    2015-01-01

    towards important challenges such as social sensing, enabling social networking and privacy protection. In this paper we firstly investigate the methods and technologies for acquisition of the relevant context for promotion of sociability among inhabitants of USN environments. Afterwards, we review...... architectures and techniques for enabling social interactions between participants. Finally, we identify privacy as the major challenge for networking in USN environments. Consequently, we depict design guidelines and review privacy protection models for facilitating personal information disclosure....

  7. Information and Communications Technology (ICT) in Nigeria Educational Assessment System--Emerging Challenges

    Science.gov (United States)

    Aworanti, Olatunde Awotokun

    2016-01-01

    This paper examines Information and Communications Technology (ICT) in Nigeria educational assessment system with its emerging challenges. This is inevitable following the globalisation trend which has brought drastic changes in the world of technology. The essence of the paper is to describe the present status of ICT in the Nigeria educational…

  8. Possibilities and Challenges designing low-carbon-energy technologies

    DEFF Research Database (Denmark)

    Bjarklev, Araceli

    Though there is broad consensus that one of the solutions to the current environmental challenge will be based on the use of low-carbon technologies, and even though there is a big potential to turn to a more sustainable design and innovation, there are several elements that need to be taken...... as a study object and discusses the question: What are the main possibilities and challenges when designing low-carbon illumination technologies? To answer this question, we use a systemic approach including environmental, economic, energy and political issues using relevant concepts from the Ecological...

  9. Past and future challenges in developing remote systems technology

    International Nuclear Information System (INIS)

    Ferguson, K.R.

    1978-01-01

    During the early development of remote systems for processing and examining fuel and materials from nuclear reactors, the facility designer and operator worked closely together to meet the challenges of this new field. Numerous challenges still face the nuclear remote systems engineer, e.g., the development of systems that reduce the exposure of workers, the need for advances in basic technology, and the development of cost-effective facilities. The solution to these and other challenges can be accelerated by an expanded program of information exchange, an aggressive development program, and improved project management procedures

  10. Manufacturing Concepts of the Future – Upcoming Technologies Solving Upcoming Challenges

    DEFF Research Database (Denmark)

    Hadar, Ronen; Bilberg, Arne

    concepts and technologies that are being developed today which may be used to solve manufacturing challenges in the future, such as: (self) reconfigurable manufacturing systems, (focused) flexible manufacturing systems, and AI inspired manufacturing. The paper will try to offer a critical point of view......This paper presents an examination of Western European manufacturers’ future challenges as can be predicted today. Some of the challenges analyzed in the paper are: globalization, individualism and customization and agility challenges. Hereafter, the paper presents a broad analysis on manufacturing...

  11. Presentations of the PTAC driving safety technology forum

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Issues concerning road safety and driver training in relation to the petroleum industry were the focus of this conference. The results of a driving safety survey from the Petroleum Technology Alliance Canada were presented. High risk driver identification methods were discussed along with coaching case studies, including details of continuous and advanced driver training by various industry members. Road hazard analysis was discussed as an effective means of reducing vehicular incidents. The dangers posed by cell phones were reviewed, as well as issues concerning motor vehicle event data recorders and personal privacy. The safety aspects of global positioning system (GPS) enabled fleet management systems were evaluated. Tactical plans for Alberta's traffic collision fatality and injury reduction strategy were examined. An overview of the Schlumberger Canada Driving Program was presented. The systems and processes used within Halliburton Canada to reinforce safe driving behaviors were reviewed. Real time personnel monitoring was discussed, as well as various asset management technologies. It was suggested that new communications technologies for mobile resource management can improve oilfield fleet safety and productivity. The forum featured 12 presentations, of which 8 have been catalogued separately for inclusion in this database.

  12. The conceptual and practical challenges to technology categorisation in the preparation of technology needs assessments

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Hansen, Ulrich Elmer

    2015-01-01

    the technology focus in the project, practice shows that the questions of what a technology is and how the key concepts of technology transfer and diffusion should be understood and operationalized remain diffuse. This paper explores the reasons for this by analysing the experience of the TNA project in using...... comprising varying degrees of software, orgware and hardware; ii) technologies appearing as whole systems of production; iii) technologies covering different application markets; and iv) technologies situated on a continuum between research, development and diffusion. These challenges are proxies...... be misleading. We therefore call for an increased focus on clarifying the technology concept in the training for the next generation of TNAs....

  13. Marketing and 21 st Century Technological Challenges: The Need ...

    African Journals Online (AJOL)

    Marketing and 21 st Century Technological Challenges: The Need for Curricula Review. ... Journal of Research in National Development ... Marketing had over the years served the dominant function of bridging the gap between production and consumption through a conceptualized, well structured programme of academic ...

  14. Surmounting the challenge of numbers, science and technology in ...

    African Journals Online (AJOL)

    Surmounting the challenge of numbers, science and technology in educational policy development. TK Yesufu, AO Yesufu. Abstract. No Abstract. Nigerian Journal of Physics Vol. 17 (Supplement) 2005: pp. 299-310. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL ...

  15. Formal Abstraction in Engineering Education--Challenges and Technology Support

    Science.gov (United States)

    Neuper, Walther A.

    2017-01-01

    This is a position paper in the field of Engineering Education, which is at the very beginning in Europe. It relates challenges in the new field to the emerging technology of (Computer) Theorem Proving (TP). Experience shows, that "teaching" abstract models, for instance the wave equation in mechanical engineering and in electrical…

  16. The Challenge of Gender Gap in Science and Technology Among ...

    African Journals Online (AJOL)

    The Challenge of Gender Gap in Science and Technology Among ... of Mkar shows that the gender gap in core science and computer courses is too wide to be ... tuition scholarship and the introduction of sexuality education for the purpose of ...

  17. Information Technology: A challenge to the Creation and ...

    African Journals Online (AJOL)

    As organisations increasingly adopt the use of information and communication technologies, the corresponding increase in the creation of electronic records has brought about a number of records management challenges. These manifest themselves in a number of ways. Problems associated with the management of ...

  18. Challenges of Technology, Social Media, and Information Control

    Science.gov (United States)

    Flaherty, Bill

    2013-01-01

    Today's youth must deal with friend management 24 hours a day, seven days a week, through smartphones and such social networking sites as Facebook. Technology in the classroom can be valuable, but not without challenges. The key is well-thought-out policies. While school districts can't completely control how students use their…

  19. Meeting national challenges with science, engineering, and technology

    International Nuclear Information System (INIS)

    1992-03-01

    This report discusses research in the following areas at Lawrence Livermore National Laboratory: national challenges; the Livermore Laboratory; national defense: preserving peace in a rapidly changing world; energy: clean and economic; environment: from the microscopic to the global; health: genetics and biomedicine; economy: bringing laboratory technology to the US market; education: sparking interest in science; and the Livermore Laboratory: a national resource

  20. Deep reactive ion etching of auxetic structures: present capabilities and challenges

    International Nuclear Information System (INIS)

    Muslija, Alban; Díaz Lantada, Andrés

    2014-01-01

    Auxetic materials (or metamaterials) have negative Poisson ratios (NPR) and display the unexpected properties of lateral expansion when stretched, and equal and opposing densification when compressed. Such auxetic materials are being used more frequently in the development of novel products, especially in the fields of intelligent expandable actuators, shape-morphing structures and minimally invasive implantable devices. Although several micromanufacturing technologies have already been applied to the development of auxetic materials and devices, additional precision is needed to take full advantage of their special mechanical properties. In this study, we present a very promising approach for the development of auxetic materials and devices based on the use of deep reactive ion etching (DRIE). The process stands out for its precision and its potential applications to mass production. To our knowledge, it represents the first time this technology has been applied to the manufacture of auxetic materials with nanometric details. We take into account the present capabilities and challenges linked to the use of DRIE in the development of auxetic materials and auxetic-based devices. (technical note)

  1. Overview of principles and challenges of fusion nuclear technology

    International Nuclear Information System (INIS)

    Abdou, M.

    2007-01-01

    Fusion offers very attractive features as a sustainable, broadly available energy source: no emissions of greenhouse gases, no risk of severe accident, and no long-lived radioactive waste. Significant advances in the science and technology of fusion have been realized in the past decades. Seven countries (EU, Japan, USA, Russia, S. Korea, China, and India) comprising about half the world population are constructing a major magnetic fusion facility, called ITER, in France. The objectives of ITER are to demonstrate self-sustaining burning fusion plasma and to test fusion technologies relevant to fusion reactor. Many challenges to the practical utilization of fusion energy remain ahead. Among these challenges is the successful development of Fusion Nuclear Technology (FNT). FNT includes those fusion system components circumscribing the plasma and responsible for tritium production and processing, heat removal at high temperature and power density, and high heat flux components. FNT components face a new and more challenging environment than experienced by any previous nuclear application. Beyond plasma physics, FNT has most of the remaining feasibility and attractiveness issues in the development of fusion as an energy source. The blanket, a key FNT component, determines the critical path to DEMO. The blanket is exposed to an intense radiation environment. Radioactivity and decay heat can be produced in the structure and other blanket elements. Hence, material choices have a large impact on safety and environmental attractiveness. The unique conditions of the fusion environment include high radiation flux, high surface heat flux, strong 3-D-component magnetic field with large gradients, and ultra-low vacuum. These conditions, together with the requirements for high-temperature operation and tritium self-sufficiency, make blanket design and development challenging tasks. The blanket concepts being considered worldwide can be classified into solid breeders and liquid

  2. Presentation

    Directory of Open Access Journals (Sweden)

    Eduardo Vicente

    2013-06-01

    Full Text Available In the present edition of Significação – Scientific Journal for Audiovisual Culture and in the others to follow something new is brought: the presence of thematic dossiers which are to be organized by invited scholars. The appointed subject for the very first one of them was Radio and the invited scholar, Eduardo Vicente, professor at the Graduate Course in Audiovisual and at the Postgraduate Program in Audiovisual Media and Processes of the School of Communication and Arts of the University of São Paulo (ECA-USP. Entitled Radio Beyond Borders the dossier gathers six articles and the intention of reuniting works on the perspectives of usage of such media as much as on the new possibilities of aesthetical experimenting being build up for it, especially considering the new digital technologies and technological convergences. It also intends to present works with original theoretical approach and original reflections able to reset the way we look at what is today already a centennial media. Having broadened the meaning of “beyond borders”, four foreign authors were invited to join the dossier. This is the first time they are being published in this country and so, in all cases, the articles where either written or translated into Portuguese.The dossier begins with “Radio is dead…Long live to the sound”, which is the transcription of a thought provoking lecture given by Armand Balsebre (Autonomous University of Barcelona – one of the most influential authors in the world on the Radio study field. It addresses the challenges such media is to face so that it can become “a new sound media, in the context of a new soundscape or sound-sphere, for the new listeners”. Andrew Dubber (Birmingham City University regarding the challenges posed by a Digital Era argues for a theoretical approach in radio studies which can consider a Media Ecology. The author understands the form and discourse of radio as a negotiation of affordances and

  3. Women’s Participation in Africa’s Nuclear Development-Challenges and Opportunities (Poster Presentation)

    International Nuclear Information System (INIS)

    Mkhosi-Motsaathebe, M.

    2015-01-01

    Expansion of nuclear technologies and plans for new plants in Africa makes this an exciting time for more women to be involved in the nuclear sector and there are lots of opportunities across the nuclear value chain for women to be involved. In recent decades, more and more women are are now entering the nuclear field and many people are starting to recognise opportunities for women, since the role played by women in the nuclear field enhances the development goals for many countries. In developing countries and in Africa in particular, however, there is a greater need for awareness of women’s involvement in STEM fields in general, and to change prevailing attitudes about women’s participation in the nuclear science and technology in particular. This paper will look at various opportunities women have in the expanding nuclear sector in the continent, and how these opportunities can be utilised, not only for those in sciences but also in business disciplines. The approaches organizations and countries can take in broadening participation of the female gender in the nuclear development in Africa; will also be presented, as well as how to address the challenges faced by women in the dynamic nuclear field. (author)

  4. Present status of laser technology for maintenance and repair

    International Nuclear Information System (INIS)

    Sano, Yuji

    2001-01-01

    A laser has superior spatial and timely controllability and has no repulsive force at its use, it is a tool suitable for remote operation. And, as a partial processing with low exotherm and deformation by its use becomes possible, it can have an advantage omissible for post processes such as heat treatment and so on. Therefore, on in-situ repair of present constructions, laser is thought to be an optimum tool. And, in nuclear energy plants, maintenance and management of their instruments are important, and then a number of technical developments activating its advantages have been carried out. Above all, repair engineering around a reactor has a number of places difficult to access them for its operators, so remote engineering using laser is desired for in special. Here was described on the present status of development and realization containing protect conservation and inspection repair technology using laser. (G.K.)

  5. Desulfuration technologies: past, present and future; Tecnologias de desulfuracion: pasado, presente y futuro

    Energy Technology Data Exchange (ETDEWEB)

    Rodas G, Arturo; Blass A, Georgina; Panama T, Luz A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2003-07-01

    The interest for obtaining harmony between the electric power generation and the environment has derived into the design of numerous technologies for the control of the main emissions of atmospheric polluting agents, being some of them the sulfur oxides (SOx) that, at certain levels of concentration in the atmosphere, cause health damages and to the surrounding ecosystem. The present article shows an overview of the technologies for the disposal of sulfurated compounds in thermoelectric power stations and their application trends in the future systems of electric power generation. [Spanish] El interes por lograr una armonia entre la generacion de energia electrica y el medio ambiente, ha derivado en el diseno de numerosas tecnologias para el control de las principales emisiones de contaminantes atmosfericos, siendo algunos de ellos los oxidos de azufre (SOx) que, a ciertos niveles de concentracion en la atmosfera, ocasionan danos a la salud y al ecosistema circundante. El presente articulo muestra un panorama general de las tecnologias de eliminacion de compuestos sulfurados en centrales termoelectricas y sus tendencias de aplicacion en los futuros sistemas de generacion de energia electrica.

  6. Standards for Technological Literacy: Past, Present, and Future

    Science.gov (United States)

    Dugger, William E., Jr; Moye, Johnny J.

    2018-01-01

    "Standards for Technological Literacy: Content for the Study of Technology (STL)" provides the content for what every technologically literate student should know and be able to do. It "defines what the study of technology in Grades K-12 should be, but it does not lay out a curriculum" (ITEA/ITEEA, 2000/2002/2007, p. 200).…

  7. Challenges of Information Technology Security in the NASA Environment

    Science.gov (United States)

    Santiago, S. S.

    2000-01-01

    A brief description of the NASA organization and how the CIO responsibilities are integrated into that organization followed by an introduction of the NASA ITS Program goals and objectives. An overview of the four major enterprises' cultures and how those cultures tie back to the Enterprises' missions. A description of the ITS challenges that exist stemming from the competing NASA Enterprises' requirements and how they have formed the basis of the NASA ITS Program. A talk will focus on policies and procedures and the technology being incorporated into the NASA infrastructure and how that technology ties back to the policies and procedures.

  8. Viewing the Changing World of Educational Technology from a Different Perspective: Present Realities, Past Lessons, and Future Possibilities

    Science.gov (United States)

    Sanders, Martie; George, Ann

    2017-01-01

    This review paper focuses on likely reasons for the rhetoric-reality gap in the use of educational information and communication technology. It is based on the assumption that the present challenges being experienced with educational ICT might be avoided in the future if we look at the current challenges from a different perspective, by revisiting…

  9. Reducing Weight for Transportation Applications: Technology Challenges and Opportunities

    Science.gov (United States)

    Taub, Alan I.

    Today's land, sea and air transportation industries — as a business necessity — are focused on technology solutions that will make vehicles more sustainable in terms of energy, the environment, safety and affordability. Reducing vehicle weight is a key enabler for meeting these challenges as well as increasing payload and improving performance. The potential weight reductions from substituting lightweight metals (advanced high-strength steels, aluminum, magnesium and titanium alloys) are well established. For magnesium castings, weight savings of 60% have been reported [1]. The value of weight reduction depends on the transportation sector and ranges from about 5/kg saved for automobiles to over 500/kg saved for aircraft [2]. The challenge is to optimize the material properties and develop robust, high volume, manufacturing technologies and the associated supply chain to fabricate components and subsystems at the appropriate cost for each application.

  10. Oil-Free Shaft Support System Rotordynamics: Past, Present, and Future Challenges and Opportunities

    Science.gov (United States)

    DellaCorte, Christopher

    2011-01-01

    Recent breakthroughs in Oil-Free technologies have enabled new high-speed rotor systems and turbomachinery. Such technologies can include compliant-surface gas bearings, magnetic bearings, and advanced solid lubricants and tribo-materials. This presentation briefly reviews critical technology developments and the current state-of-the-art, emerging Oil-Free rotor systems and discusses obstacles preventing more widespread use. Key examples of "best practices" for deploying Oil-Free technologies will be presented and remaining major technical questions surrounding Oil-Free technologies will be brought forward.

  11. Nanomaterials and future aerospace technologies: opportunities and challenges

    Science.gov (United States)

    Vaia, Richard A.

    2012-06-01

    Two decades of extensive investment in nanomaterials, nanofabrication and nanometrology have provided the global engineering community a vast array of new technologies. These technologies not only promise radical change to traditional industries, such as transportation, information and aerospace, but may create whole new industries, such as personalized medicine and personalized energy harvesting and storage. The challenge today for the defense aerospace community is determining how to accelerate the conversion of these technical opportunities into concrete benefits with quantifiable impact, in conjunction with identifying the most important outstanding scientific questions that are limiting their utilization. For example, nanomaterial fabrication delivers substantial tailorablity beyond a traditional material data sheet. How can we integrate this tailorability into agile manufacturing and design methods to further optimize the performance, cost and durability of future resilient aerospace systems? The intersection of nano-based metamaterials and nanostructured devices with biotechnology epitomizes the technological promise of autonomous systems and enhanced human-machine interfaces. What then are the key materials and processes challenges that are inhibiting current lab-scale innovation from being integrated into functioning systems to increase effectiveness and productivity of our human resources? Where innovation is global, accelerating the use of breakthroughs, both for commercial and defense, is essential. Exploitation of these opportunities and finding solutions to the associated challenges for defense aerospace will rely on highly effective partnerships between commercial development, scientific innovation, systems engineering, design and manufacturing.

  12. Physics and technology challenges of B B factories

    Energy Technology Data Exchange (ETDEWEB)

    Zisman, M.S.

    1991-05-01

    An e{sup +}e{sup {minus}} collider designed to serve as a B factory requires a luminosity of 3 {times} 10{sup 33} cm{sup {minus}1}s{sup {minus}1} -- a factor of 20 beyond that of the best present collider and thus presents a considerable challenge to the accelerator builder. To optimize the experiment, it is necessary that the B{bar B} system have a moving center-of-mass, which implies different energies for the two beams. This feature dictates that a two-ring configuration be used. Accelerator physics issues that arise in such a design are related to the need to tightly focus the beams to a vertical beta function on the order of 1 cm, to bring the beams from two different rings into collision and then clearly separate them again, and to mask the detector region sufficiently to permit measurements with very large beam currents passing through the interaction region. Because the luminosity is limited by the beam-beam interaction, any large improvement must come from considerably increasing both the beam current and the number of bunches in the ring. These choices place many demands on accelerator technology as well as accelerator physics. Vacuum systems must be designed to handle the thermal load from a multi-ampere beam of 8--9 GeV and to maintain an adequate running pressure in the face of a large gas load from synchrotron radiation induced photodesorption. An RF system capable of supporting the high beam currents must be developed. To reduce the growth of potentially strong multibunch instabilities, the cavity higher-order modes must be highly damped to Q {le} 70. Even with a well optimized RF system, the high beam currents typically mean that wideband multibunch feedback systems are needed to maintain beam stability.

  13. Present status of the EUR document the challenge of new incorporations

    International Nuclear Information System (INIS)

    Alomar, F.

    1998-01-01

    EUR (European Utilities Requirements) Document is in process, with DTN's active participation since the beginning. Two new Utilities representing non-European Union Countries (Switzerland and Russia) have joined the EUR Document Group of Sponsoring Utilities, whose members up to now belonged to nine utilities from European Union Countries. Although, in general terms, this incorporation is enriching, this late arrival does present problems due to the fact that the document is now under discussion the incorporation of different technological practices, and last but not least, different Licensing Approaches. Should be remembered that currently an overall review by the different Regulatory Bodies is in process and an intervention by the E.C. is being prepared. Both inside and outside of the European Continent, other Utilities have also shown their interest in the EUR Document. EUR Document Volume 3 sets a compliance evaluation between Projects from different Nuclear Island Manufactures and EUR's Top Tier Requirements (established in Volume 1) and Detailed Requirements (established in Volume 2). Presently a comparison is being carried out for three Nuclear Island Suppliers: ABB, NPI (KWU and Framatome Joint Venture) and Westinghouse. In the near future it is foreseen to initiate compliance evaluation for two more N.I. suppliers: General Electric and Rosenergatom. Challenges of these new incorporations are analyzed in what follows. (Author)

  14. Teachers and Technology: Present Practice and Future Directions

    Science.gov (United States)

    DeCoito, Isha; Richardson, Tasha

    2018-01-01

    Technology cannot be effective in the classroom without teachers who are knowledgeable about both the technology itself and its implementation to meet educational goals. While technology use in the classroom is increasing, improving learning through its application should remain the goal. In this study, the authors explored 74 middle school…

  15. Open Access: a commitment of all. Challenges for the present / Acceso abierto: un compromiso de todos. Retos para el presente

    Directory of Open Access Journals (Sweden)

    César Eligio-Triana

    2016-04-01

    Full Text Available Acceso abierto: un compromiso de todos. Retos para el presenteEl conocimiento abierto (CA es un movimiento que busca propiciar las denominadas sociedades del conocimiento; este se puede entender como “toda forma de conocimiento creada por personas e instituciones diseminada de una forma proactiva en un formato accesible, interoperable y reutilizable. Se trata de conocimiento que se convierte en un bien público” (Moneo, 2015. El conocimiento abierto presenta distintas manifestaciones, como pueden ser la ciencia abierta, los recursos educativos abiertos, el software de código abierto, los datos abiertos, los negocios y la innovación abierta y el acceso abierto (Lara y Rossini, 2014, pp. 22-44.En particular, el acceso abierto (AA u Open Access se puede considerar como una construcción colectiva que “genera beneficios directos sobre la sociedad ya que facilita una transferencia directa de conocimiento al entorno económico y social y también se disuelven las barreras entre países ricos y pobres” (Abadal, 2012; también va más allá de la consulta gratuita de contenidos inéditos o publicados. Para lograr esto es necesario realizar acciones en diversos sentidos, en las cuales deben participar de manera activa todos los involucrados en el apoyo, la producción y la distribución de las obras.Palabras clave: investigación en arquitectura, Open Access, publicaciones científicas, sociedad del conocimiento, tecnologías de la información y comunicación (TIC. Open Access: a commitment of all. Challenges for the presentOpen knowledge (OK is a movement that seeks the promotion of the so-called knowledge societies; Open knowledge can be understood as “all forms of knowledge created by individuals and institutions proactively disseminated in an accessible, interoperable and reusable format. This is knowledge that becomes a public good” (Moneo, 2015. Open knowledge has different manifestations, such as open science, open educational

  16. Disruptive technology disorder: A past, present, and future neurologic syndrome.

    Science.gov (United States)

    Weaver, Donald F

    2017-07-25

    Based upon an analysis of 6 major historical technological advances over the last 150 years, a new syndrome, disruptive technology disorder (DTD), is introduced. DTD describes the human health ailments that accompany the implementation of disruptive technologies. Elevator sickness, railway spine, and bicycle face are representative examples. Though the underlying causative disruptive technologies may differ, many neurologic symptoms (headache, dizziness, weakness) are common to multiple DTDs. Born of technology-driven societal change, DTDs manifest as a complex interplay between biological and psychological symptoms. © 2017 American Academy of Neurology.

  17. Technologies for HIV prevention and care: challenges for health services.

    Science.gov (United States)

    Maksud, Ivia; Fernandes, Nilo Martinez; Filgueiras, Sandra Lucia

    2015-09-01

    This article aims to consider some relevant challenges to the provision of "new prevention technologies" in health services in a scenario where the "advances" in the global response to AIDS control are visible. We take as material for analysis the information currently available on the HIV post-exposure prophylaxis (PEP) and pre-exposure prophylaxis (PrEP), treatment as prevention (TASP) and over the counter. The methodology consisted of the survey and analysis of the Biblioteca Virtual em Saúde (BVS: MEDLINE, LILACS, WHOLIS, PAHO, SciELO) articles that addressed the issue of HIV prevention and care in the context of so-called new prevention technologies. The results of the studies show that there is assistance on the ground of clinics for the treatment of disease responses, but there are several challenges related to the sphere of prevention. The articles list some challenges regarding to management, organization of services and the attention given by health professionals to users. The current context shows evidence of the effectiveness of antiretroviral therapy in reducing the risk of HIV transmission, but the challenges for the provision of preventive technologies in health services permeate health professionals and users in their individual dimensions and health services in organizational and structural dimension. Interventions should be made available in a context of community mobilization; there should be no pressure on people to make HIV testing, antiretroviral treatment or for prevention. In the management is responsible for the training of health professionals to inform, clarify and make available to users, partners and family information about the new antiretroviral use strategies.

  18. "Hedge Your Bets": Technology's Role in Young Gay Men's Relationship Challenges.

    Science.gov (United States)

    McKie, Raymond M; Milhausen, Robin R; Lachowsky, Nathan J

    2017-01-01

    Technology is playing an increasingly pervasive role among young gay men in the process of meeting potential romantic or sexual partners. We investigated challenges posed by technology related to young gay men's relationships. Focus groups (n = 9) of young gay men aged 18-24 (n = 43) were transcribed verbatim, and thematic analysis was used to identify two major themes regarding challenges to relationship development and maintenance. Subthemes include unrealistic expectations of relationships, inauthentic self-presentation online, sexual primacy over romance, increased opportunities for infidelity, and jealousy. The implications of this study for sexual education and sexual health promotion are discussed.

  19. Meeting the challenges of case management with remote patient monitoring technology.

    Science.gov (United States)

    Cherry, J C; Colliflower, S J; Tsiperfal, A

    2000-01-01

    The article presents an overview of some of the current trends in health care and the challenges faced by nurse case managers who are providing disease management services. It discusses some of the emerging technologies available today for innovative case management. In particular, this article describes a program run by a healthcare system in Sacramento, California that uses an Internet-based technology to enhance their nurse case management model. The article demonstrates how the Health Hero platform enables interactive communication between nurse case managers and their patients, thereby meeting some of the challenges the nurse case managers are faced with in the modern disease-management world.

  20. Lithography-based ceramic manufacture (LCM) of auxetic structures: present capabilities and challenges

    International Nuclear Information System (INIS)

    Lantada, Andrés Díaz; De Blas Romero, Adrián; Schwentenwein, Martin; Jellinek, Christopher; Homa, Johannes

    2016-01-01

    Auxetic metamaterials are known for having a negative Poisson’s ratio (NPR) and for displaying the unexpected properties of lateral expansion when stretched and densification when compressed. Even though a wide set of micro-manufacturing resources have been used for the development of auxetic metamaterials and related devices, additional precision and an extension to other families of materials is needed for their industrial expansion. In addition, their manufacture using ceramic materials is still challenging. In this study we present a very promising approach for the development of auxetic metamaterials and devices based on the use of lithography-based ceramic manufacturing. The process stands out for its precision and complex three-dimensional geometries attainable, without the need of supporting structures, and for enabling the manufacture of ceramic auxetics with their geometry controlled from the design stage with micrometric precision. To our knowledge it represents the first example of application of this technology to the manufacture of auxetic geometries using ceramic materials. We have used a special three-dimensional auxetic design whose remarkable NPR has been previously highlighted. (paper)

  1. Tasks and challenges in prototype development with novel technology - an empirical study

    DEFF Research Database (Denmark)

    Ravn, Poul Martin; Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik

    2015-01-01

    This paper presents a thematic analysis of 138 monthly reports from a joint industrial and academic project where multiple prototypes were developed based on the same technology. The analysis was based on tasks and challenges described in the reports by project managers over a period of three years...

  2. Grand challenges in technology enhanced learning outcomes of the 3rd Alpine Rendez-Vous

    CERN Document Server

    Fischer, Frank; Sutherland, Rosamund; Zirn, Lena

    2014-01-01

    This book presents a key piece of the vision and strategy developed in STELLAR. It sets out a new mid-term agenda by defining Grand Challenges for research and development in technology-enhanced learning. Other than mere technology prizes, STELLAR Grand Challenges deal with problems at the interface of social and technical sciences. They pose problems that can be solved only in interdisciplinary collaboration. The descriptions of the Grand Challenge Problems were sent out to a number of stakeholders from industry, academia, and policy-making who responded with insightful, creative and critical comments bringing in their specific perspectives. This book will inspire everyone interested in TEL and its neighboring disciplines in their future projects. All of the listed problems, first hints with respect to the approach, measurable success indicators and funding sources are outlined. The challenges focus on what noted experts regard as important upcoming, pending, and innovative fields of research, the solution o...

  3. Petroleum: the new challenges. Market pressure and technological lever

    International Nuclear Information System (INIS)

    Boy de la Tour, X.

    1992-01-01

    This paper describes the forecasting of petroleum demand during the next years, the state of petroleum reserves and recognized oil fields in the whole world at the present time. The challenge to obtain a sufficient petroleum production, facing an increased energy demand, requires to have recourse to new exploration and oil recovery techniques. 8 refs., 5 figs., 1 tab

  4. Technology transfer present and futures in the electronic arts

    Directory of Open Access Journals (Sweden)

    Brian Degger

    2008-01-01

    Full Text Available We are entering an era where creating the fantastical is possible in the arts. In the areas of mixed reality and biological arts, responsive works are created based on advances in basic science and technology. This is enabling scientists and artists to pose new questions. As the time between discovery and application is so short, artists need imaginative ways of accessing new technology in order to critique and use it.These are the new paints that the majority of artists cannot afford or access, technology to enable cloning of DNA, to print channels on a chip, to access proprietary 3G networks. Currently, partnerships or residencies are used to facilitate artist’s access to these technologies. What would they do if technology was available that enabled them to make any art work they so desire? Are the limitations in current technology an advantage rather than a disadvantage in some of their works? Does interaction with technologists make their work more robust? Are there disadvantages? How do they get access to the technology they require? Open source or proprietary? Or have they encountered the situation where their vision is greater than technology allows. When their work breaks because of this fact, is their art broken? Blast Theory (Brighton,UK, FoAM(Brussels, Belgium and Amsterdam, Netherlands, SymbioticA (Perth, Australia are organisations pushing technological boundaries in the service of art. This paper addresses some questions of technology transfer in relation to recent artworks, particularly I like Frank in Adelaide (Blast Theory, transient reality generators (trg (FoAM and Multi electrode array artist (MeART (SymbioticA.

  5. Big data related technologies, challenges and future prospects

    CERN Document Server

    Chen, Min; Zhang, Yin; Leung, Victor CM

    2014-01-01

    This Springer Brief provides a comprehensive overview of the background and recent developments of big data. The value chain of big data is divided into four phases: data generation, data acquisition, data storage and data analysis. For each phase, the book introduces the general background, discusses technical challenges and reviews the latest advances. Technologies under discussion include cloud computing, Internet of Things, data centers, Hadoop and more. The authors also explore several representative applications of big data such as enterprise management, online social networks, healthcar

  6. Addressing informatics challenges in Translational Research with workflow technology.

    Science.gov (United States)

    Beaulah, Simon A; Correll, Mick A; Munro, Robin E J; Sheldon, Jonathan G

    2008-09-01

    Interest in Translational Research has been growing rapidly in recent years. In this collision of different data, technologies and cultures lie tremendous opportunities for the advancement of science and business for organisations that are able to integrate, analyse and deliver this information effectively to users. Workflow-based integration and analysis systems are becoming recognised as a fast and flexible way to build applications that are tailored to scientific areas, yet are built on a common platform. Workflow systems are allowing organisations to meet the key informatics challenges in Translational Research and improve disease understanding and patient care.

  7. Sustainable ground transportation – review of technologies, challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, Ramesh K. [Department of Mechanical Engineering and Materials Science, Washington University, St. Louis, MO 63130 (United States)

    2013-07-01

    Currently there are nearly 750 million ground vehicles in service worldwide. They are responsible for 50% of petroleum (oil) consumption and 60% of all greenhouse gas (GHG) emissions worldwide. The number of vehicles is forecasted to double by 2050. Therefore the environmental issues such as noise, emissions and fuel burn have become important for energy and environmental sustainability. This paper provides an overview of specific energy and environmental issues related to ground transportation. The technologies related to reduction in energy requirements such as reducing the vehicle mass by using the high strength low weight materials and reducing the viscous drag by active flow control and smoothing the operational profile, and reducing the contact friction by special tire materials are discussed along with the portable energy sources for reducing the GHG emissions such as low carbon fuels (biofuels), Lithium-ion batteries with high energy density and stability, and fuel cells. The technological challenges and opportunities for innovations are discussed.

  8. Turning Technologies into Businesses- The Challenge for the Technical Entrepreneur

    Science.gov (United States)

    Glass, Alexander

    2000-03-01

    Over the past twenty-five years, new businesses based on innovative technology have been the driving force for the US economy. Due to the abundance of early-stage capital, each year, thousands of scientists and engineers receive support to start new, technology-based businesses. However, the transition from technologist to entrepreneur is often difficult. It requires a shift in emphasis from a technology focus to a market focus. We shall discuss the challenges facing the technical entrepreneur in launching a new enterprise, and a variety of resources that are available to help the entrepreneur succeed. Many technologists fall victim to the myth that if you ``build a better mousetrap, the world will beat a path to your door." To be sure, it is important to base your business on sound technology that offers a clear advantage over current practice, and, if possible, to secure title to the technology, either by obtaining patent protection, or securing an exclusive license. Once that is done, however, the principal concern of the fledgling enterprise is building a business and obtaining the financial resources to enable it to grow. The entrepreneur must develop a clear and compelling business model, that can be communicated to a non-technical investor in a few minutes. This requires a mode of thinking and expression quite different from that commonly used in engineering or scientific discussions. Fortunately, abundant resources are available to help the technologist become a successful entrepreneur. We shall discuss the kinds of assistance that are generally available through local and national programs, and give specific examples based on the activities of the Bay Area Regional Technology Alliance in northern California.

  9. Use and development of teaching technologies presented in nursing research

    Directory of Open Access Journals (Sweden)

    Pétala Tuani Candido de Oliveira Salvador

    2015-07-01

    Full Text Available Objective: characterizing teaching technologies used or developed in nursing dissertations and theses in Brazil. Methods: a documentary research that had data collection sourced from directories of theses and dissertations available on the website of the Brazilian Nursing Association, from Volumes Nineteen (XIX (2001 to Twenty-one (XXI (2013. Results: of 6346 studies, 18 (0.28% used or developed teaching technologies, composed of the following categories: use of conceptual map; use of games; development of Virtual Learning Environment; development of educational materials; development of Distance Education courses; and artifact development. Conclusion: national research on the development and use of teaching technology in nursing are still insufficient, especially in the North and Northeast. Multiple benefits of the use of teaching technologies in nursing and learning environments were highlighted, not only for students and professionals, but also for patients.

  10. Information Technology: A challenge to the Human Factors Society?

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1988-01-01

    In his presidential address at the annual meeting of the Human Factors Society, Julian Christensen urged the members of the society to spread the gospel and to persuade the members of other professional societies such as psychologists,sociologists and engineers to join the Human Factors Society......, the argument being that advanced technology requires a cross-disciplinary approach to human factors problems. In the present note, I would like to support this presidential effort. In fact, I will go further in that direction and argue that the present fast pace of information technology threatens to overrun...

  11. An impoverished machine: challenges to human learning and instructional technology.

    Science.gov (United States)

    Taraban, Roman

    2008-08-01

    Many of the limitations to human learning and processing identified by cognitive psychologists over the last 50 years still hold true, including computational constraints, low learning rates, and unreliable processing. Instructional technology can be used in classrooms and in other learning contexts to address these limitations to learning. However, creating technological innovations is not enough. As part of psychological science, the development and assessment of instructional systems should be guided by theories and practices within the discipline. The technology we develop should become an object of research like other phenomena that are studied. In the present article, I present an informal account of my own work in assessing instructional technology for engineering thermodynamics to show not only the benefits, but also the limitations, in studying the technology we create. I conclude by considering several ways of advancing the development of instructional technology within the SCiP community, including interdisciplinary research and envisioning learning contexts that differ radically from traditional learning focused on lectures and testing.

  12. The challenges of diversification of technologies and markets

    International Nuclear Information System (INIS)

    Bollini, G.

    2003-01-01

    For several years, Tecnatom has been developing a technology and market diversification strategy based on its corporate vision of technological leadership in the services and products it supplies on the national an international nuclear market. Starting with the historical development of these technologies, this article describes how diversification in the global market is initiated and identifies the industrial market segments where the provision of services and the supply of high-tech products can be expanded. It also includes the diversification strategies in these new markets, and presents some of the results obtained in the aeronautical and aerospace market, the transportation market, the industrial processes market, etc. Finally, it provides some examples of the development of new virtual reality and enhanced reality technologies and how these new capabilities are fed back to the nuclear market. (Author)

  13. The Challenge To Tactical Reconnaissance: Timeliness Through Technology

    Science.gov (United States)

    Stromfors, Richard D.

    1984-12-01

    As you have no doubt gathered from Mr. Henkel's introduction, I have spent over 20 years of my Air Force career involved in the reconnaissance mission either as a tactical reconnaissance pilot, as a tactical reconnaissance inspector, as a writer and speaker on that subject while attending the Air Force Professional Military Education Schools, and currently as the Air Force's operational manager for reconnaissance aircraft. In all of those positions, I've been challenged many times over with what appeared, at first, to be insurmountable problems that upon closer examination weren't irresolvable after all. All of these problems pale, however, when viewed side-by-side with the one challenge that has faced me since I began my military career and, in fact, faces all of us as I talk with you today. That one challenge is the problem of timeliness. Better put: "Getting information to our customers firstest with the mostest." Together we must develop better platforms and sensors to cure this age-old "Achilles heel" in the reconnaissance cycle. Despite all of our best intentions, despite all of the emerging technologies that will be available, and despite all of the dollars that we've thrown at research and development, we in the reconnaissance business still haven't done a good job in this area. We must do better.

  14. Review of past, present, and future of recording technology

    Science.gov (United States)

    Al-Jibouri, Abdul-Rahman

    2003-03-01

    The revolution of information storage and recording has been advanced significantly over the past two decades. Since the development of computers in early 1950s by IBM, the data (information) was stored on magnetic disc by inducing magnetic flux to define the pit direction. The first disc was developed by IBM with diameter of 25inch to store around 10 kByte. After four decades, the disc drive has become more advanced by reducing the drive size, increasing ariel density and cost reduction. The introduction of new computer operating systems and the Internet resulted in the need to develop high ariel density in the 1990s. Therefore, the disc drive manufacturers were pushed harder to develop new technologies at low cost to survive the competitive market. The disc drives, which are based on media (where the data/information is stored) and the head (which will write and read data/information). The head and disc are separated and with the current technology the spacing between the disc and head is about 40nm. A new technology based on magnetic recording was developed to serve the audio market. This technology is called magnetic type, it is similar to the disc drive, but the media is based on tape rather than rigid disc. Another difference being the head and media are in direct contact. Magnetic tape was developed for audio application and a few years later this technology was extended to allow and accept another technology, called video. This allows consumers to record and view movies in their home. The magnetic tape also used the computer industries for back up data. Magnetic tape is still used in computers and has advanced further over the past decade, companies like Quantum Corp has developed digital linear tape.

  15. Teacher Challenges to Implement Engineering Design in Secondary Technology Education

    Science.gov (United States)

    Kelley, Todd R.; Wicklein, Robert C.

    2009-01-01

    This descriptive study examined the current status of technology education teacher practices with respect to engineering design. This article is the third article in a three-part series presenting the results of this study. The first article in the series titled "Examination of Engineering Design Curriculum Content" highlighted the research…

  16. Soft Robotics: from scientific challenges to technological applications

    Science.gov (United States)

    Laschi, C.

    2016-05-01

    Soft robotics is a recent and rapidly growing field of research, which aims at unveiling the principles for building robots that include soft materials and compliance in the interaction with the environment, so as to exploit so-called embodied intelligence and negotiate natural environment more effectively. Using soft materials for building robots poses new technological challenges: the technologies for actuating soft materials, for embedding sensors into soft robot parts, for controlling soft robots are among the main ones. This is stimulating research in many disciplines and many countries, such that a wide community is gathering around initiatives like the IEEE TAS TC on Soft Robotics and the RoboSoft CA - A Coordination Action for Soft Robotics, funded by the European Commission. Though still in its early stages of development, soft robotics is finding its way in a variety of applications, where safe contact is a main issue, in the biomedical field, as well as in exploration tasks and in the manufacturing industry. And though the development of the enabling technologies is still a priority, a fruitful loop is growing between basic research and application-oriented research in soft robotics.

  17. The Assurance Challenges of Advanced Packaging Technologies for Electronics

    Science.gov (United States)

    Sampson, Michael J.

    2010-01-01

    Advances in microelectronic parts performance are driving towards finer feature sizes, three-dimensional geometries and ever-increasing number of transistor equivalents that are resulting in increased die sizes and interconnection (I/O) counts. The resultant packaging necessary to provide assemble-ability, environmental protection, testability and interconnection to the circuit board for the active die creates major challenges, particularly for space applications, Traditionally, NASA has used hermetically packaged microcircuits whenever available but the new demands make hermetic packaging less and less practical at the same time as more and more expensive, Some part types of great interest to NASA designers are currently only available in non-hermetic packaging. It is a far more complex quality and reliability assurance challenge to gain confidence in the long-term survivability and effectiveness of nonhermetic packages than for hermetic ones. Although they may provide more rugged environmental protection than the familiar Plastic Encapsulated Microcircuits (PEMs), the non-hermetic Ceramic Column Grid Array (CCGA) packages that are the focus of this presentation present a unique combination of challenges to assessing their suitability for spaceflight use. The presentation will discuss the bases for these challenges, some examples of the techniques proposed to mitigate them and a proposed approach to a US MIL specification Class for non-hermetic microcircuits suitable for space application, Class Y, to be incorporated into M. IL-PRF-38535. It has recently emerged that some major packaging suppliers are offering hermetic area array packages that may offer alternatives to the nonhermetic CCGA styles but have also got their own inspectability and testability issues which will be briefly discussed in the presentation,

  18. Wearable technology to help with visual challenges - two case studies.

    Science.gov (United States)

    Kálmán, Viktor; Baczó, Csaba; Livadas, Makis; Csielka, Tamás

    2015-01-01

    Today as embedded computing technology and sensors become cheaper and smaller wearable technologies experience an unprecedented boom. This article presents two wearable systems that aim to help people with low vision and the blind in performing everyday tasks and doing sports. DIGIGLASSES is a project aimed at creating a pair of augmented reality digital glasses that present controlled light and contrast levels and marks selectable features on the field of vision to aid in everyday tasks. BLINDTRACK is guidance system that uses wireless localization and an innovative haptic feedback belt to guide blind runners along the running track. Both systems are briefly presented along with the most relevant technical details and user feedback where applicable. Both projects were funded by the EU FP7. Corresponding author V. Kalman: viktor.kalman@ateknea.com.

  19. Energy technologies at Sandia National Laboratories: Past, Present, Future

    Energy Technology Data Exchange (ETDEWEB)

    1989-08-01

    We at Sandia first became involved with developing energy technology when the nation initiated its push toward energy independence in the early 1970s. That involvement continues to be strong. In shaping Sandia's energy programs for the 1990s, we will build on our track record from the 70s and 80s, a record outlined in this publication. It contains reprints of three issues of Sandia's Lab News that were devoted to our non-nuclear energy programs. Together, they summarize the history, current activities, and future of Sandia's diverse energy concerns; hence my desire to see them in one volume. Written in the fall of 1988, the articles cover Sandia's extremely broad range of energy technologies -- coal, oil and gas, geothermal, solar thermal, photovoltaics, wind, rechargeable batteries, and combustion.

  20. Trends in Process Analytical Technology: Present State in Bioprocessing.

    Science.gov (United States)

    Jenzsch, Marco; Bell, Christian; Buziol, Stefan; Kepert, Felix; Wegele, Harald; Hakemeyer, Christian

    2017-08-04

    Process analytical technology (PAT), the regulatory initiative for incorporating quality in pharmaceutical manufacturing, is an area of intense research and interest. If PAT is effectively applied to bioprocesses, this can increase process understanding and control, and mitigate the risk from substandard drug products to both manufacturer and patient. To optimize the benefits of PAT, the entire PAT framework must be considered and each elements of PAT must be carefully selected, including sensor and analytical technology, data analysis techniques, control strategies and algorithms, and process optimization routines. This chapter discusses the current state of PAT in the biopharmaceutical industry, including several case studies demonstrating the degree of maturity of various PAT tools. Graphical Abstract Hierarchy of QbD components.

  1. Use of permanent magnets in accelerator technology: Present and future

    International Nuclear Information System (INIS)

    Halbach, K.

    1987-01-01

    Permanent magnet systems have some generic properties that, under some circumstances, make them not only mildy preferable over electromagnets, but make it possible to do things that can not be done with any other technology. After a general discussion of these generic advantages, some specific permanent magnet systems will be described. Special emphasis will be placed on systems that have now, or are likely to have in the future, a significant impact on how some materials research is conducted

  2. Present status of some technological activities supporting the MOLCARE project

    Energy Technology Data Exchange (ETDEWEB)

    Torazza, A. [Ansaldo Ricerche S.r.l., Genova (Italy); Rocchini, G. [ENEL, Milano (Italy); Scagliotti, M. [CISE, Milano (Italy)

    1996-12-31

    The development of MCFC stack technology is carried out at Ansaldo Ricerche in the framework of the MOLCARE project, a cooperation with Spanish companies under a partial UE funding, while a specific research program concerning the physico-chemical characterization of materials is performed jointly by CISE and ENEL. The project includes the development, the construction and the testing of a full scale 100 kW prototype, the assessment of stack technology on subscale stacks, the mathematical modelling of the MCFC based plants and the basic researches. The aim of the basic researches, carried out on single cells, is to improve the effectiveness and durability of both the active and the hardware materials. The Ansaldo stack technology is based on external manifolding. The full scale 100 kW prototype will be integrated with the sensible heat reformer and other ancillary equipments according to the {open_quote}Compact Unit (CU){close_quotes} concept. These technical choices stress requirements for manifold gasket configuration. electrolyte migration control, {Delta}p management and porous component compaction.

  3. Academic Training: Technological challenges for LHC experiments, the CMS example

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 28 February, 1, 2, 3 & 4 March from 11.00 to 12.00 hrs - Main Auditorium, bldg. 500 Technological challenges for LHC experiments, the CMS example by P. SPHICAS/CERN-PH, G. DISSERTORI/ETH, Zürich, Ch. M. MANNELLI/CERN-PH, G. HALL/Imperial College, London. GB, P. FABBRICATORE/INFN, Genova, I Monday 28 February Design principles and performances of CMS P. Sphicas/CERN-PH Tuesday 1st March Crystal calorimetry in LHC environment G. Dissertori/ETH Zürich, CH Wednesday 2 March Silicon tracking in LHC environment M. Mannelli/CERN-PH Thursday 3 March Radhard fast electronics for LHC experiments G. Hall/Imperial College London, GB Friday 4 March Design principles of thin high field superconducting solenoids P. Fabbricatore/INFN Genova, I ENSEIGNEMENT ACADEMIQUE ACADEMIC TRAINING Françoise Benz 73127 academic.training@cern.ch

  4. Mobile Computing: The Emerging Technology, Sensing, Challenges and Applications

    International Nuclear Information System (INIS)

    Bezboruah, T.

    2010-12-01

    The mobile computing is a computing system in which a computer and all necessary accessories like files and software are taken out to the field. It is a system of computing through which it is being able to use a computing device even when someone being mobile and therefore changing location. The portability is one of the important aspects of mobile computing. The mobile phones are being used to gather scientific data from remote and isolated places that could not be possible to retrieve by other means. The scientists are initiating to use mobile devices and web-based applications to systematically explore interesting scientific aspects of their surroundings, ranging from climate change, environmental pollution to earthquake monitoring. This mobile revolution enables new ideas and innovations to spread out more quickly and efficiently. Here we will discuss in brief about the mobile computing technology, its sensing, challenges and the applications. (author)

  5. Assessing Curriculum Planning for Humanities Inquiry: The Challenges and Opportunities of Poster Presentation

    Science.gov (United States)

    Wallace, Heather D.; Preston, Lou; Harvie, Kate M.

    2016-01-01

    Authentic assessment has been promoted in teacher education as a means of addressing the challenge that pre-service teachers often face in translating theory into practice. In this article, we outline one approach to authentic assessment that utilises a poster format to present a humanities inquiry sequence. Drawing on a practice-based research…

  6. Coal and clean coal technology: challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Minchener, Andrew [IEA Clean Coal Centre, London (United Kingdom)

    2013-07-01

    Globally, there is a growing concern about fuel diversity and security of supply, particularly with regard to oil and natural gas. In contrast, coal is available from a much wider range of sources and has greater price stability. Consequently, coal use is increasing rapidly, and by 2030 may well reach a level of more than 4,500 Mtoe, corresponding to close to a doubling of current levels. However, at the same time, tightening regulations will require better solutions for achieving environmental compliance, for which coal has a number of key issues to address. Most of the coal will be used in the power generation sector. Consequently, the key research challenges are to develop and deploy methods by which coal can be used cleanly, efficiently, and in a sustainable way. These include improvements to existing coal utilisation technologies, particularly to improve operational flexibility and availability, while reducing energy use through higher efficiencies. There is an increasing need to ensure improved emissions control, with the emphasis on achieving ever-lower emissions of particulates, SO{sub 2} and NO{sub x} while also introducing control of trace species, particularly mercury. Alongside this, a key challenge is the integration of techniques that can capture CO{sub 2} then transport and store it within secure geological formations, thereby resulting in near zero emissions of CO{sub 2}. From a power plant perspective, the need is to achieve such integration while minimising any adverse impact on power plant efficiency, performance of existing emissions control systems, operational flexibility and availability. At the same time, means to minimize the additional costs associated with such technology must be established.

  7. Use of permanent magnets in accelerator technology: Present and future

    International Nuclear Information System (INIS)

    Halbach, K.

    1987-05-01

    This report is a collection of viewgraphs discussing accelerator magnets. Permanent magnet systems have some generic properties that, under some circumstances, make them not only mildly preferable over electromagnets, but make it possible to do things that can not be done with any other technology. After a general discussion of these generic advantages, some specific permanent magnet systems will be described. Special emphasis will be placed on systems that have now, or are likely to have in the future, a significant impact on how some materials research is conducted. 4 refs., 33 figs

  8. Technology-mediated therapy for chronic pain management: the challenges of adapting behavior change interventions for delivery with pervasive communication technology.

    Science.gov (United States)

    Rosser, Benjamin A; McCullagh, Paul; Davies, Richard; Mountain, Gail A; McCracken, Lance; Eccleston, Christopher

    2011-04-01

    Adapting therapeutic practice from traditional face-to-face exchange to remote technology-based delivery presents challenges for the therapist, patient, and technical writer. This article documents the process of therapy adaptation and the resultant specification for the SMART2 project-a technology-based self-management system for assisting long-term health conditions, including chronic pain. Focus group discussions with healthcare professionals and patients were conducted to inform selection of therapeutic objectives and appropriate technology. Pertinent challenges are identified, relating to (1) reduction and definition of therapeutic objectives, and (2) how to approach adaptation of therapy to a form suited to technology delivery. The requirement of the system to provide dynamic and intelligent responses to patient experience and behavior is also emphasized. Solutions to these challenges are described in the context of the SMART2 technology-based intervention. More explicit discussion and documentation of therapy adaptation to technology-based delivery within the literature is encouraged.

  9. ENERGY IN THE CONTEXT OF THE PRESENT CHALLENGES TO THE EUROPEAN COMMON SECURITY AND DEFENCE POLICY

    Directory of Open Access Journals (Sweden)

    Gabriel ANDRUSEAC

    2014-10-01

    Full Text Available The Common Security and Defence Policy is a part of the European Union’s Common Foreign and Security Policy (CFSP and establishes the policy framework for the institutional structures and military instruments which have to deal with the security challenges in Europe’s geopolitical neighborhood. The article aims to identify and analyze the role of energy as one of the present challenges to the European Common Security and Defence Policy in the context of the recent events in the world economy.

  10. Technological challenges for boosting coal production with environmental sustainability.

    Science.gov (United States)

    Ghose, Mrinal K

    2009-07-01

    The global energy requirement has grown at a phenomenon rate and the consumption of primary energy sources has been a very high positive growth. This paper focuses on the consumption of different primary energy sources and it identifies that coal will continue to remain as the prime energy source in foreseeable future. It examines the energy requirement perspective for India and demand of coal as the prime energy source. Economic development and poverty alleviation depend on securing affordable energy sources and Indian coal mining industry offers a bright future for the country's energy security, provided the industry is allowed to develop by supportive government policies and adopts latest technologies for mining. It is an irony that in-spite of having a plentiful reserves, India is not able to jack up coal production to meet its current and future demand. It discusses the strategies to be adopted for growth and meeting the coal demand. But such energy are very much concerned with environmental degradation and must be driven by contemporary managerial acumen addressing environmental and social challenges effectively The paper highlights the emissions of greenhouse gases due to burning of fossil fuels and environmental consequences of global warming and sea-level rise. Technological solutions for environment friendly coal mining and environmental laws for the abatement of environmental degradation are discussed in this paper.

  11. The challenge of increasing scientific and technological manpower in Thailand

    Science.gov (United States)

    Kulintornprasert, Usanee

    Scope and method of study. The purpose of this study is to examine the responses of Thai educators and other stakeholders in each organization. They are facing the challenge of increasing scientific and technological manpower for the future of scientific and technological capabilities in Thailand. A dramaturgy analysis procedure serves as the framework for the study. This framework provides a tool to help comprehend, describe, communicate, and transform the character and process of the remedy of the S&T manpower shortage. Namely, Burke's five elements are useful in this process. The scene is the setting of the performance, which refers to the current situation of Thailand's science and technology capability. The act displays various problems that take place in the setting. The agent means the groups of people who are involved in the S&T manpower development process and their roles to accelerate S&T manpower development strategies. The agency describes the projects that support those strategies, and the purpose is the reason or motive for the above-mentioned strategies. Findings and conclusions. Through the dramaturgical analysis on the basis of data collection, the conclusions of this study can be shown as the following items. First, the bureaucratic system is the barrier. As a result, the solution should be conducted both top-bottom and bottom-top performance. Second, the government should consider developing S&T strategies as a long-term plan. Third, the current science curricula should be revised. Fourth, universities should fully support and encourage faculty to conduct research along with teaching. Fifth, the quality of education should be improved. Sixth, "new blood" should be inserted in educational institutions. Last, but not least, the existing S&T curricula should be aimed at the international standard.

  12. Moroccan experience in nuclear sciences and technology: Present status

    International Nuclear Information System (INIS)

    El Mediouri, K.

    2001-01-01

    The applications of nuclear technology started in Morocco in the early sixties and were developed particularly in the sectors of Agriculture, Education and Medicine. In the early seventies, these applications were extended to other important sectors such as Industry using gauges and NDT techniques, Mines and Hydrology. But a lack of sufficient and adequate infrastructure has limited the development of these applications. Further more, as Morocco relies totally on foreign imports to meet its energy needs, the option of nuclear power generation started to be considered seriously. This was the initiator of a real national reflection on an integrated program for all peaceful applications of nuclear energy which led to the progressive constitution of an institutional and regulatory frame. In this context, the National Center for Nuclear energy, Sciences and Techniques (CNESTEN), which is a public institution, was created in 1986. Its current programme and future are described in the paper. (author)

  13. Spinning-disk confocal microscopy: present technology and future trends.

    Science.gov (United States)

    Oreopoulos, John; Berman, Richard; Browne, Mark

    2014-01-01

    Live-cell imaging requires not only high temporal resolution but also illumination powers low enough to minimize photodamage. Traditional single-point laser scanning confocal microscopy (LSCM) is generally limited by both the relatively slow speed at which it can acquire optical sections by serial raster scanning (a few Hz) and the higher potential for phototoxicity. These limitations have driven the development of rapid, parallel forms of confocal microscopy, the most popular of which is the spinning-disk confocal microscope (SDCM). Here, we briefly introduce the SDCM technique, discuss its strengths and weaknesses against LSCM, and update the reader on some recent developments in SDCM technology that improve its performance and expand its utility for life science research now and in the future. © 2014 Elsevier Inc. All rights reserved.

  14. The quest for nuclear technology and the challenges of knowledge management in Nigeria

    International Nuclear Information System (INIS)

    Mundu, A.; Umar, A.M.

    2004-01-01

    The major milestones in the quest for nuclear technology were highlighted, followed by a review of nuclear application in research and development, health, water resource management and agriculture.the past activities of the national INIS centre particularly with respect to submission of input, promotion and knowledge management were examined. And a repositioned INIS centre to meet the challenges of nuclear information management and the emerging trend in knowledge management was presented with specific target in the short and the long term. (author)

  15. The ALICE time projection chamber - a technological challenge in LHC heavy ion physics

    CERN Document Server

    Bächler, J

    2004-01-01

    The Time Projection Chamber is the main tracking detector in the central region of the ALICE experiment. This paper addresses the specific technological challenges for the detector and the solutions adopted to cope with the extreme particle densities in LHC heavy ion collisions. We will present the major components of the detector with an outlook of its expected performance in the LHC heavy ion program, as well as recent results from the comprehensive ALICE TPC test facility. (3 refs).

  16. A Study Of Cyber Security Challenges And Its Emerging Trends On Latest Technologies

    OpenAIRE

    Reddy, G. Nikhita; Reddy, G. J. Ugander

    2014-01-01

    Cyber Security plays an important role in the field of information technology .Securing the information have become one of the biggest challenges in the present day. When ever we think about the cyber security the first thing that comes to our mind is cyber crimes which are increasing immensely day by day. Various Governments and companies are taking many measures in order to prevent these cyber crimes. Besides various measures cyber security is still a very big concern to many. This paper ma...

  17. Rising to the challenges-Reflections on Future-oriented Technology Analysis

    OpenAIRE

    Georghiou, Luke; Cassingena Harper, Jennifer

    2013-01-01

    Drawing upon the presentations made at the fourth conference on Future-oriented Technology Analysis, this essay reflects on the implications of the current period of instability and discontinuity for the practice of FTA or foresight. In the past the demand environment for foresight on research and innovation policy favoured application to priority-setting and articulation of demand. New tendencies include a heightened search for breakthrough science and a focus on grand societal challenges. B...

  18. Micropropagation of bulbous crops: technology and present state

    NARCIS (Netherlands)

    Klerk, de G.J.M.

    2012-01-01

    Conventional propagation of bulbous crops must be supplemented with micropropagation to satisfy the requirements of present-day horticulture with respect to fast production of disease-free, superior starting material. Adequate micropropagation protocols for bulbous crops are therefore a sine qua

  19. Radiation Testing, Characterization and Qualification Challenges for Modern Microelectronics and Photonics Devices and Technologies

    Science.gov (United States)

    LaBel, Kenneth A.; Cohn, Lewis M.

    2008-01-01

    At GOMAC 2007, we discussed a selection of the challenges for radiation testing of modern semiconductor devices focusing on state-of-the-art memory technologies. This included FLASH non-volatile memories (NVMs) and synchronous dynamic random access memories (SDRAMs). In this presentation, we extend this discussion in device packaging and complexity as well as single event upset (SEU) mechanisms using several technology areas as examples including: system-on-a-chip (SOC) devices and photonic or fiber optic systems. The underlying goal is intended to provoke thought for understanding the limitations and interpretation of radiation testing results.

  20. Technological and licensing challenges for high burnup fuel

    International Nuclear Information System (INIS)

    Gross, H.; Urban, P.; Fenzlein, C.

    2002-01-01

    Deregulation of electricity markets is driving electricity prices downward as well in the U.S. as in Europe. As a consequence high burnup fuel will be demanded by utilities using either the storage or the reprocessing option. At a minimum, burnups consistent with the current political enrichment limit of 5 w/o will be required for both markets.Significant progress has been achieved in the past by Siemens in meeting the demands of utilities for increased fuel burnup. The technological challenges posed by the increased burnup are mainly related to the corrosion and hydrogen pickup of the clad, the high burnup properties of the fuel and the dimensional changes of the fuel assembly structure. Clad materials with increased corrosion resistance appropriate for high burnup have been developed. The high burnup behaviour of the fuel has been extensively investigated and the decrease of thermal conductivity with burnup, the rim effect of the pellet and the increase of fission gas release with burnup can be described, with good accuracy, in fuel rod computer codes. Advanced statistical design methods have been developed and introduced. Materials with increased corrosion resistance are also helpful controlling the dimensional changes of the fuel assembly structure. In summary, most of the questions about the fuel operational behaviour and reliability in the high burnup range have been solved - some of them are still in the process of verification - or the solutions are visible. This fact is largely acknowledged by regulators too. The main licensing challenges for high burnup fuel are currently seen for accident condition analyses, especially for RIA and LOCA. (author)

  1. 700 C power plant technology. Status and challenge

    Energy Technology Data Exchange (ETDEWEB)

    Tschaffon, Helmut [E.ON Energie AG, Muenchen (Germany)

    2010-07-01

    Coal will remain an indispensable major source of energy for power generation in the world in the coming decades, because there are resources for hundreds of years. Coal fired power plants can be operated very flexible which gets increasing importance due to the stochastic input from regenerative energies like wind and solar energy. Sustainable technologies for cool-fired power plants have to be developed to optimise environmental protection and to save valuable resources and reduce CO{sub 2}-emissions. Future coal fired steam power plants aim an elevated steam temperature of about 700 C to reach a net efficiency of about 50%. This paper will give an overview over the status of the development of the 700 C technology and will highlight the challenges to be overcome before their commercial use. The European way to a 700 C Power plant started with the project AD700 in the year 1998. In this project the basic design of a 400 MW demo plant was done and some material tests and component qualifications for nickel-based alloys and new austenitic steels were started and terminated. AD700 delivered the basis of the design of the Component Test Facility COMTES700 (RFCS funded project with European manufacturers and utilities). COMTES 700 was operated between 2005 and 2009. It was integrated into the E.ON power plant Scholven in Germany to test mainly nickel based materials and power plant components. In the project NRWPP700 (2006-2010, funded by NRW and financed by European utilities) the detail design of the steam generator, piping system and turbine of a 500 MW power plant was done. In 7 material projects the qualification of components and materials was supported. At the same time of lot of national and international R and D projects (e.g. MARCKO and COORETEC) were performed. Due to the high amount of these projects they cannot be mentioned here in a detailed way. In 2007 the E.ON project 50plus was started. The aim was to plan and build a 700 C demo plant in

  2. Silver nanoparticles: technological advances, societal impacts, and metrological challenges

    Science.gov (United States)

    Calderón-Jiménez, Bryan; Johnson, Monique E.; Montoro Bustos, Antonio R.; Murphy, Karen E.; Winchester, Michael R.; Vega Baudrit, José R.

    2017-02-01

    Silver nanoparticles (AgNPs) show different physical and chemical properties compared to their macroscale analogs. This is primarily due to their small size and, consequently, the exceptional surface area of these materials. Presently, advances in the synthesis, stabilization, and production of AgNPs have fostered a new generation of commercial products and intensified scientific investigation within the nanotechnology field. The use of AgNPs in commercial products is increasing and impacts on the environment and human health are largely unknown. This article discusses advances in AgNP production and presents an overview of the commercial, societal, and environmental impacts of this emerging nanoparticle (NP), and nanomaterials in general. Finally, we examine the challenges associated with AgNP characterization, discuss the importance of the development of NP reference materials (RMs) and explore their role as a metrological mechanism to improve the quality and comparability of NP measurements.

  3. Silver Nanoparticles: Technological Advances, Societal Impacts, and Metrological Challenges.

    Science.gov (United States)

    Calderón-Jiménez, Bryan; Johnson, Monique E; Montoro Bustos, Antonio R; Murphy, Karen E; Winchester, Michael R; Vega Baudrit, José R

    2017-01-01

    Silver nanoparticles (AgNPs) show different physical and chemical properties compared to their macroscale analogs. This is primarily due to their small size and, consequently, the exceptional surface area of these materials. Presently, advances in the synthesis, stabilization, and production of AgNPs have fostered a new generation of commercial products and intensified scientific investigation within the nanotechnology field. The use of AgNPs in commercial products is increasing and impacts on the environment and human health are largely unknown. This article discusses advances in AgNP production and presents an overview of the commercial, societal, and environmental impacts of this emerging nanoparticle (NP), and nanomaterials in general. Finally, we examine the challenges associated with AgNP characterization, discuss the importance of the development of NP reference materials (RMs) and explore their role as a metrological mechanism to improve the quality and comparability of NP measurements.

  4. Materials and structures technology insertion into spacecraft systems: Successes and challenges

    Science.gov (United States)

    Rawal, Suraj

    2018-05-01

    Over the last 30 years, significant advancements have led to the use of multifunctional materials and structures technologies in spacecraft systems. This includes the integration of adaptive structures, advanced composites, nanotechnology, and additive manufacturing technologies. Development of multifunctional structures has been directly influenced by the implementation of processes and tools for adaptive structures pioneered by Prof. Paolo Santini. Multifunctional materials and structures incorporating non-structural engineering functions such as thermal, electrical, radiation shielding, power, and sensors have been investigated. The result has been an integrated structure that offers reduced mass, packaging volume, and ease of integration for spacecraft systems. Current technology development efforts are being conducted to develop innovative multifunctional materials and structures designs incorporating advanced composites, nanotechnology, and additive manufacturing. However, these efforts offer significant challenges in the qualification and acceptance into spacecraft systems. This paper presents a brief overview of the technology development and successful insertion of advanced material technologies into spacecraft structures. Finally, opportunities and challenges to develop and mature next generation advanced materials and structures are presented.

  5. Present day design challenges exemplified by the Clinch River Breeder Reactor Plant

    International Nuclear Information System (INIS)

    Dickson, P.W. Jr.; Anderson, C.A. Jr.

    1976-01-01

    The present day design challenges faced by the Clinch River Breeder Reactor Plant engineer result from two causes. The first cause is aspiration to achieve a design that will operate at conditions which are desirable for future LMFBRs in order for them to achieve low power costs and good breeding. The second cause is the licensing impact. Although licensing the CRBRP won't eliminate future licensing effort, many licensing questions will have been resolved and precedents set for the future LMFBR industry

  6. 2014 Water Power Program Peer Review: Marine and Hydrokinetic Technologies, Compiled Presentations (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    2014-02-01

    This document represents a collection of all presentations given during the EERE Wind and Water Power Program's 2014 Marine and Hydrokinetic Peer Review. The purpose of the meeting was to evaluate DOE-funded hydropower and marine and hydrokinetic R&D projects for their contribution to the mission and goals of the Water Power Program and to assess progress made against stated objectives.

  7. 2014 Water Power Program Peer Review: Hydropower Technologies, Compiled Presentations (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    2014-02-01

    This document represents a collection of all presentations given during the EERE Wind and Water Power Program's 2014 Hydropower Peer Review. The purpose of the meeting was to evaluate DOE-funded hydropower and marine and hydrokinetic R&D projects for their contribution to the mission and goals of the Water Power Program and to assess progress made against stated objectives.

  8. Assessment of DEMO challenges in technology and physics

    Energy Technology Data Exchange (ETDEWEB)

    Zohm, Hartmut, E-mail: zohm@ipp.mpg.de [Max-Planck-Institut für Plasmaphysik, EURATOM Association, D-85748 Garching (Germany)

    2013-10-15

    Highlights: ► It is very important to respect the interlinks between physics and technology when developing designs for DEMO. ► Pulsed operation of a tokamak DEMO should seriously be considered in conservative DEMO designs. ► Optimization of both plasma CD efficiency as well as wall plug efficiency of the CD system is important. ► Exhaust requirements lead to an unprecedented high level of core radiation loss by impurity seeding in DEMO. -- Abstract: The challenges that DEMO designs encounter in both technology and physics are reviewed. It is shown that it is very important to respect the interlinks between these fields when developing designs for DEMO. Examples for areas where such interlinks put very strict requirements are the development of a steady state tokamak operation scenario and the question of power exhaust taking into account the boundary conditions set by materials questions. Concerning steady state operation, we find that demands on the physics scenario are so high that pulsed operation of a tokamak DEMO should seriously be considered in conservative DEMO designs. Alternatively, the device could foresee a large fraction of externally driven current which calls for optimization of both plasma CD efficiency as well as wall plug efficiency of the CD system. In the exhaust area, a realistic estimate of the admissable time averaged peak heat flux at the target is of the order of 5 MW/m{sup 2}, leading to strict requirements for the operational scenario, which has to rely on an unprecedented high level of radiation loss by impurity seeding and the facilitation of partial detachment. Thus, exhaust scenarios along these lines have to be developed which are compatible with the confinement needs and the H-L back transition power for DEMO. In both areas, we discuss possible risk mitigation strategies based on conceptually different approaches.

  9. Cerebral venous sinus thrombosis: A diagnostic challenge in a rare presentation

    Directory of Open Access Journals (Sweden)

    Sultan AbdulWadoud Alshoabi

    2017-01-01

    Full Text Available Cerebral venous sinus thrombosis (CVST is an uncommon, life-threatening condition with a variable clinical presentation that makes it a challenge of diagnosis. A 39-year-old male patient presented to the hospital with complete loss of conscious and admitted to Medical Intensive Care Unit for investigation without any obvious history that was difficult for diagnosis. In this case, the patient presented with coma that is a rare presentation of CVST with no obvious clinical history and he was male patient that means he is free of all gender-specific risk factors of CVST. The brain computed tomography (CT scan showed hypodense lesion in the left upper parietal region with no hemorrhage. The lesion was low-signal intensity (SI on T1WIs and high SI on T2WIs and restricted on diffusion-weighted images like arterial infarctions, but magnetic resonance angiography (MRA was normal that excluded arterial infarction. Gadolinium-enhanced MR venography (MRV showed the filling defect of CVST. CVST can be present by a mysterious clinical presentation that makes it as a challenge of diagnosis even by medical imaging by CT and MR imaging (MRI. A combination of MRI and MRV is the best, noninvasive, and nonionizing imaging modality for the diagnosis of CVST.

  10. DOE Low-Level Waste Management Program perspective on technology transfer: opportunities and challenges

    International Nuclear Information System (INIS)

    Large, D.E.

    1982-01-01

    The Department of Energy's Low-Level Waste Management Program (DOE LLWMP) perspective in regard to transfer of LLWMP technology to current and potential users in both the commercial and defense sectors is discussed. Past, present, and future opportunities and challenges for the whole nuclear waste management are indicated. Elements considered include: historical and evolutionary events and activities; the purpose of the Program and its inherent opportunities and challenges; achievements and expected accomplishments; supporters and interactors; packaging and delivering technology; implementing and serving potential users; determining and meeting users' needs; and identifying and responding to opportunities and challenges. The low-level waste management effort to improve shallow land burial technology began in FY 1977 and has expanded to include waste treatment and alternative disposal methods. Milestones have been established and are used as principal management control items. This technology, the Program Product, is described and is made available. This year, the Program has drafted criteria for inclusion in a DOE order for radioactive waste management operations at DOE sites

  11. Proceeding of the Scientific Meeting and Presentation on Accelerator Technology and its Application

    International Nuclear Information System (INIS)

    Sudjatmoko; Anggraita, P.; Darsono; Sudiyanto; Kusminarto; Karyono

    1999-07-01

    The proceeding contains papers presented on Scientific Meeting and Presentation on Accelerator Technology and Its Application, held in Yogyakarta, 16 january 1996. This proceeding contains papers on accelerator technology, especially electron beam machine. There are 11 papers indexed individually. (ID)

  12. QUALITY ASSURANCE IN SECONDARY EDUCATION PROGRAME OF BANGLADESH OPEN UNIVERSITY: Present Status and Challenges

    Directory of Open Access Journals (Sweden)

    Zobaida AKHTER

    2008-04-01

    Full Text Available In the present day in national and international perspectives, quality is the top of most agendas. Quality of education has significant impact and invaluable contribution to the area of development. Recently, the SSC & HSC program of BOU have earned recognition of equivalency with the formal education sector, which has naturally raised the question of quality assurance of these programs By applying the quantitative method, the study has assessed the present status of the quality of SSC & HSC program of BOU and also put some recommendations to meet the challenges for further development.

  13. Nuclear Research Institute Rez: Its past and present and future challenges

    International Nuclear Information System (INIS)

    Pazdera, F.

    2001-01-01

    The paper gives an overview of the history of the Nuclear Research Institute Rez development over forty years of its existence. Its present activities are discussed in some detail. These historical and present activities represent the basis for discussing: challenges faced by the NRI; interactions of NRI with their environment; collaboration and co-operation. Nuclear research centres would continue to be the main source of expertise for power plant operation, radiation and isotope applications, regulatory practices and waste management. Future developments should ensure viability of these centres. (author)

  14. Nuclear fission and nuclear safeguards: Common technologies and challenges

    International Nuclear Information System (INIS)

    Keepin, G.R.

    1989-01-01

    Nuclear fission and nuclear safeguards have much in common, including the basic physical phenomena and technologies involved as well as the commitments and challenges posed by expanding nuclear programs in many countries around the world. The unique characteristics of the fission process -- such as prompt and delayed neutron and gamma ray emission -- not only provide the means of sustaining and controlling the fission chain reaction, but also provide unique ''signatures'' that are essential to quantitative measurement and effective safeguarding of key nuclear materials (notably 239 Pu and 235 U) against theft, loss, or diversion. In this paper, we trace briefly the historical emergence of safeguards as an essential component of the expansion of the nuclear enterprise worldwide. We then survey the major categories of passive and active nondestructive assay techniques that are currently in use or under development for rapid, accurate measurement and verification of safe-guarded nuclear materials in the many forms in which they occur throughout the nuclear fuel cycle. 23 refs., 14 figs

  15. Challenges and Emerging Technologies within the Field of Pediatric Actigraphy

    Science.gov (United States)

    Galland, Barbara; Meredith-Jones, Kim; Terrill, Philip; Taylor, Rachael

    2014-01-01

    Actigraphy as an objective measure of sleep and wakefulness in infants and children has gained popularity over the last 20 years. However, the field lacks published guidelines for sleep–wake identification within pediatric age groups. The scoring rules vary greatly and although sensitivity (sleep agreement with polysomnography) is usually high, a significant limitation remains in relation to specificity (wake agreement). Furthermore, accurate algorithm output and sleep–wake summaries usually require prior entry from daily logs of sleep–wake periods and artifact-related information (e.g., non-wear time), involving significant parent co-operation. Scoring criteria for daytime naps remains an unexplored area. Many of the problems facing accuracy of measurement are inherent within the field of actigraphy itself, particularly where sleep periods containing significant movements are erroneously classified as wake, and within quiet wakefulness when no movements are detected, erroneously classified as sleep. We discuss the challenges of actigraphy for pediatric sleep, briefly describe the technical basis and consider a number of technological approaches that may facilitate improved classification of errors in sleep–wake discrimination. PMID:25191278

  16. Detailed study of transmutation scenarios involving present day reactor technologies

    International Nuclear Information System (INIS)

    2003-01-01

    This document makes a detailed technical evaluation of three families of separation-transmutation scenarios for the management of radioactive wastes. These scenarios are based on 2 parks of reactors which recycle plutonium and minor actinides in an homogeneous way. A first scenario considers the multi-recycling of Pu and Np and the mono-recycling of Am and Cm using both PWRs and FBRs. A second scenario is based on PWRs only, while a third one considers FBRs only. The mixed PWR+FBR scenario requires innovative options and gathers more technical difficulties due to the americium and curium management in a minimum flux of materials. A particular attention has been given to the different steps of the fuel cycle (fuels and targets fabrication, burnup, spent fuel processing, targets management). The feasibility of scenarios of homogeneous actinides recycling in PWRs-only and in FBRs-only has been evaluated according to the results of the first scenario: fluxes of materials, spent fuel reprocessing by advanced separation, impact of the presence of actinides on PWRs and FBRs operation. The efficiency of the different scenarios on the abatement of wastes radio-toxicity is presented in conclusion. (J.S.)

  17. PRESENTATION

    OpenAIRE

    Editors, The

    2017-01-01

    To plan and to implement academic projects remain a systematic challenge for the team and the collaborators of the Electronic Journal. Each study published is an opportunity to strengthen the proposed goals and to add more value to the community involved and interested.

  18. Opportunities and Challenges for Technology Development and Adoption in Public Libraries

    DEFF Research Database (Denmark)

    Serholt, Sofia; Eriksson, Eva; Dalsgaard, Peter

    2018-01-01

    In this paper, we discuss opportunities and challenges for technology development and adoption in public libraries. The results are based on a multi-site comparative study and thematic analysis of six months of extensive ethnographic work in libraries in three different European countries....... The results explore the socio-technical practices, understandings, and perspectives of library staff and patrons when it comes to the role(s) and function(s) of libraries today. The contribution of this paper is two fold. Firstly, the results from the analysis of rich ethnographic data presented under six...... themes. Secondly, we offer a list of identified key opportunities and challenges focusing on 1) media and technology literacy, 2) institutional transformation and technical infrastructures, 3) resource constraints among library staff, and 4) a shift in focus towards supporting activities....

  19. Handbook of Research on E-Transformation and Human Resources Management Technologies: Organizational Outcomes and Challenges

    NARCIS (Netherlands)

    Bondarouk, Tatiana; Ruel, Hubertus Johannes Maria; Guiderdoni-Jourdain, Karine; Oiry, Ewan

    2009-01-01

    Digital advancements and discoveries are now challenging traditional human resource management services within businesses. The Handbook of Research on E-Transformation and Human Resources Management Technologies: Organizational Outcomes and Challenges provides practical, situated, and unique

  20. An overview of crystalline silicon solar cell technology: Past, present, and future

    Science.gov (United States)

    Sopian, K.; Cheow, S. L.; Zaidi, S. H.

    2017-09-01

    Crystalline silicon (c-Si) solar cell, ever since its inception, has been identified as the only economically and environmentally sustainable renewable resource to replace fossil fuels. Performance c-Si based photovoltaic (PV) technology has been equal to the task. Its price has been reduced by a factor of 250 over last twenty years (from ˜ 76 USD to ˜ 0.3 USD); its market growth is expected to reach 100 GWP by 2020. Unfortunately, it is still 3-4 times higher than carbon-based fuels. With the matured PV manufacturing technology as it exists today, continuing price reduction poses stiff challenges. Alternate manufacturing approaches in combination with thin wafers, low (< 10 x) optical enhancement with Fresnel lenses, band-gap engineering for enhanced optical absorption, and newer, advanced solar cell configurations including partially transparent bifacial and back contact solar cells will be required. This paper will present a detailed, cost-based analysis of advanced solar cell manufacturing technologies aimed at higher (˜ 22 %) efficiency with existing equipment and processes.

  1. Challenge to innovative technologies and the expected market appeal

    International Nuclear Information System (INIS)

    Tobita, Kenji; Nishio, Satoshi; Konishi, Satoshi; Tokimatsu, Koji; Hiwatari, Ryoji

    2005-01-01

    This section describes the future of fusion energy in terms of its impact on the global energy supply and global warming mitigation, the possible entry scenarios of fusion into future energy market, and innovative technologies for deploying and expanding fusion's share in the market. Section 5.1 shows that fusion energy can contribute to the stabilization of atmospheric CO 2 concentration if fusion is introduced into the future energy market at a competitive price. Considerations regarding fusion's entry scenarios into the energy market are presented in Sec. 5.2, suggesting that fusion should replace fossil energy sources and thus contribute to global warming mitigation. In this sense, first generation fusion power plants should be a viable energy source with global appeal and be so attractive as to employed in developing countries rather than in developed countries. Favorable factors lending to this purpose are fusion's stability as a power source, and its security, safety, and environmental friendliness as well as its cost-electricity. The requirements for core plasma to expand the share of fusion in the market in the latter half of this century are given in Sec. 5.3, pointing out the importance of high beta access with low aspect ratio and plasma profile control. From this same point of view, innovative fusion technologies worthy of further development are commented on in Sec. 5.4, addressing the high temperature blanket, hydrogen production, high temperature superconductors, and hot cell maintenance. (author)

  2. Present and future challenges in the new post-Westphalia order

    Directory of Open Access Journals (Sweden)

    Olesea Ţăranu

    2012-08-01

    Full Text Available The present article represents an exercise that aims to outline the main features of post-Westphalia international order, in terms of polarity of power, in an attempt to identify possible challenges regarding the stability of international system. In this respect, a special attention has been given to U.S.A position, the current world leader, and to those two actors commonly referred to when looking for the main opponents of American leadership - China and Russia. The last part identifies the main sources of insecurity that are affecting and will continue to affect the stability of the international system.

  3. Challenges and prospects of using information technologies in higher education

    Directory of Open Access Journals (Sweden)

    Frolov Alexander

    2016-01-01

    Full Text Available The considerable attention is paid to information technologies in system of the higher education now. Using the latest technology, software and hardware in the learning process allows achieving high outcomes quality of study. The article deals with modern teaching technologies, including distance learning technology, case-technology, which is already used in practice in higher education. There remain unresolved issues of effective use of new learning technologies, the quality of the used software and hardware. The perspective directions of development of informatization of education are defined.

  4. Cascading Events, Technology and the Floods Directive: future challenges

    Directory of Open Access Journals (Sweden)

    Pescaroli Gianluca

    2016-01-01

    Full Text Available Cascading events can be referred to multidimensional disasters, where a primary trigger generates a nonlinear series of secondary emergencies that escalate in time, becoming eventually the priority to tackle. In this process, critical infrastructure can be handled as roots of vulnerabilities, because they accumulate both physical attributes and functional nodes. When compromised, they produce widespread breakdowns of society, but also orient emergency responses and long-term recovery. Although floods have been widely associated to the failure of vulnerable equipments or to the disruption of strategic sectors such as energy, communication and transportation, their integration with the emerging concept of cascading has been limited. This open topic presents many challenges for scholars, researchers and practitioners, in particular when the implementation of the EU Floods Directive is considered. The paper presents an overview of the Floods Directive and its relation with the cascading events, using case studies and examples from the existing literature to point out missing links and gaps in the legislation. Conclusions argue that the Directive considers only local geographical scales and limited temporal horizons, which can be result inadequate to limit the escalation of events.

  5. Physics and technology challenges of $B\\overline{B}$ factories

    CERN Document Server

    Zisman, Michael S.

    1992-01-01

    An e+e− collider designed to serve as a B factory requires a luminosity of 3 x 1033 cm−2 s−1—a factor of 15 beyond that of the best present collider (the CESR ring)—and thus presents a considerable challenge to the accelerator builder. To optimize the experiment, it is necessary that the BB¯ system have a moving center-of-mass, which implies different energies for the two beams (hence an “asymmetric” collider). This feature dictates that a two-ring configuration be used. Accelerator physics issues that arise in such a design are related to the need to tightly focus the beams to a vertical beta function on the order of 1 cm, to bring the beams from two different rings into collision and then cleanly separate them again, and to mask the detector region sufficiently to permit measurements with very large beam currents passing through the interaction region. In addition, the process of optimizing the luminosity for asymmetric collisions breaks new ground. Because the luminosity is limited by the b...

  6. Challenges and opportunities for informational societies from the present to become reliable learning and knowledge societies

    Directory of Open Access Journals (Sweden)

    Eduardo ROMERO SÁNCHEZ

    2013-12-01

    Full Text Available This article pretend to describe the principal social trends and cultural features that prevail today, too look the philosophical foundation of thinking, feel , living and to give an educative  response and accepted to the axiological reality  and cultural present. In modern western societies great paradoxes and contradictions coexist: economical growth, technological development and greater dimensions of freedom, but also great consumption, cultural deterioration, technological dependence and unique thought. Given this we talk about the great possibilities and at the same time of the terrible threats that exist in that modern information societies. In order to become acquainted with this reality, we have focused the analysis in 3 key aspects: the impact of digital devolution, the condition of culture in contemporary society, and the need of a “new education”.

  7. X-ray inspection in the aerospace industry - state of the art, challenges, and emerging technologies

    International Nuclear Information System (INIS)

    Mohr, G.A.; Fock, T.

    2004-01-01

    The desire to non-destructively determine the quality and integrity of materials and structures has a long history in the aerospace industry. Through the entire life cycle of aircraft products and components, X-ray inspection technologies play a major role with continuously increasing demand. The requirements for X-ray inspections are continuing to be driven by the need of lower cost methods and solutions with greater reliability, sensitivity, user friendliness and high operation speed as well as applicability of new materials and structures. The presentation will summarize the status of radiographic and radioscopic X-ray inspection technologies in the aerospace industry while showing how X-ray inspection solutions respond to these requirements. Furthermore emerging inspection challenges will be identified and emerging X-ray inspection technologies will be reviewed. (author)

  8. Empowering Patients through Healthcare Technology and Information? The Challenge of becoming a Patient 2.0

    DEFF Research Database (Denmark)

    Brodersen, Søsser Grith Kragh; Lindegaard, Hanne

    2015-01-01

    of themselves appeared in newspapers, and self-management and telecare technologies were seen as ways to change elderly patients practices. Transformation of the traditional healthcare system remains on the agenda, and it continues to challenge the traditional view of the patient role (framed in this article...... on numerical representations of illness (i.e., metrics) than on direct observations of patients. Through ethnographic research in the Danish healthcare sector, we show how this new healthcare vision actually manifests in practice by presenting cases of elderly heart and diabetes patients. Technologies aimed......Abstract: In the mid-2000s, the term Patient 2.0 began to be used to denote a new patient role: empowered patients were expected to engage with various types of information and specific technologies in order to manage their own illnesses. Headlines such as Future patients will take care...

  9. Households’ use of information and communication technologies – a future challenge for energy savings?

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Gram-Hanssen, Kirsten; Røpke, Inge

    2009-01-01

    of theories of domestication of technologies, it is argued that aspects such as consumers' creativity in technology use and their non-adaption are relevant aspects to include in policy and regulation discussions on how to limit the escalating electricity consumption from household ICT use.......Increasing consumption of electricity due to a growing number of information and communication technology (ICT) appliances in households is a major challenge to reducing energy consumption. Several studies have predicted escalating ICT-related energy consumption, but relatively little has been said...... and done about possible initiatives to curb this increase. This paper presents results of a research project focusing on how dynamics of consumption influence household energy consumption on ICT. Results of the project include scenarios on how electricity consumption on ICT is expected to grow, suggesting...

  10. Technology Transfer Challenges for High-Assurance Software Engineering Tools

    Science.gov (United States)

    Koga, Dennis (Technical Monitor); Penix, John; Markosian, Lawrence Z.

    2003-01-01

    In this paper, we describe our experience with the challenges thar we are currently facing in our effort to develop advanced software verification and validation tools. We categorize these challenges into several areas: cost benefits modeling, tool usability, customer application domain, and organizational issues. We provide examples of challenges in each area and identrfj, open research issues in areas which limit our ability to transfer high-assurance software engineering tools into practice.

  11. Tertiary particle physics with ELI: from challenge to chance (Conference Presentation)

    Science.gov (United States)

    Drska, Ladislav

    2017-05-01

    nteraction of high-intensity laser pulses with solid state targets results in generation of intense pulses of secondary particles via electromagnetic interaction : electrons, ions, hard x-rays. The beams of these particles can be used to produce various types of third-generation particles, beyond electromagnetic also other types of fundamental interactions can be involved in this process [1]. As the most interesting tertiary particles could be mentioned positrons, neutron, muons. This paper shall extend our previous analysis of this topic [2]: it discusses selected technical problems of design and realization of applicable sources of these particles and presents some more elaborated proposals for potential meaningful / hopefuly realistic exploitations of this technology. (1)Tertiary Sources (TS) : First Development Steps. This part of the presentation includes the topics as follows: (11) Pulsed positron sources: Verified solutions of laser-driven positron sources [3] [4] [5], development towards applicable facilities. Some unconventional concepts of application of lasers for positron production [6]. Techniques for realization of low/very-low energy positrons. (12) Taylored neutron sources [7]: Neutron sources with demanded space distribution, strongly beamed and isotropic solutions [8] [9]. Neutron generation with taylored energy distribution. Problem of the direct production of neutrons with very low energy [10] [11]. (13) Potential muon sources: Proof-of-principle laser experiment on electron / photon driven muon production [12] [13]. Study of the possibility of effective generation of surface muons. Problems of the production of muons with very low energy. (2) Fundamental & Applied Physics with TS: This part of the talk presents the themes: (21) Diagnostic potential of TS: Lepton emission as a signature of processes in extreme systems. Passive and active diagnostics using positrons, problems of detection and evaluation. Potential diagnostic applications of muons

  12. Thermal Management of Power Semiconductor Packages - Matching Cooling Technologies with Packaging Technologies (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, K.; Moreno, G.

    2010-04-27

    Heat removal for power semiconductor devices is critical for robust operation. Because there are different packaging options, different thermal management technologies, and a range of applications, there is a need for a methodology to match cooling technologies and package configurations to target applications. To meet this need, a methodology was developed to compare the sensitivity of cooling technologies on the overall package thermal performance over a range of power semiconductor packaging configurations. The results provide insight into the trade-offs associated with cooling technologies and package configurations. The approach provides a method for comparing new developments in power semiconductor packages and identifying potential thermal control technologies for the package. The results can help users select the appropriate combination of packaging configuration and cooling technology for the desired application.

  13. Engineering and Technology Challenges for Active Debris Removal

    Science.gov (United States)

    Liou, Jer-Chyi

    2011-01-01

    After more than fifty years of space activities, the near-Earth environment is polluted with man-made orbital debris. The collision between Cosmos 2251 and the operational Iridium 33 in 2009 signaled a potential collision cascade effect, also known as the "Kessler Syndrome", in the environment. Various modelling studies have suggested that the commonly-adopted mitigation measures will not be sufficient to stabilize the future debris population. Active debris removal must be considered to remediate the environment. This paper summarizes the key issues associated with debris removal and describes the technology and engineering challenges to move forward. Fifty-four years after the launch of Sputnik 1, satellites have become an integral part of human society. Unfortunately, the ongoing space activities have left behind an undesirable byproduct orbital debris. This environment problem is threatening the current and future space activities. On average, two Shuttle window panels are replaced after every mission due to damage by micrometeoroid or orbital debris impacts. More than 100 collision avoidance maneuvers were conducted by satellite operators in 2010 to reduce the impact risks of their satellites with respect to objects in the U.S. Space Surveillance Network (SSN) catalog. Of the four known accident collisions between objects in the SSN catalog, the last one, collision between Cosmos 2251 and the operational Iridium 33 in 2009, was the most significant. It was the first ever accidental catastrophic destruction of an operational satellite by another satellite. It also signaled the potential collision cascade effect in the environment, commonly known as the "Kessler Syndrome," predicted by Kessler and Cour-Palais in 1978 [1]. Figure 1 shows the historical increase of objects in the SSN catalog. The majority of the catalog objects are 10 cm and larger. As of April 2011, the total objects tracked by the SSN sensors were more than 22,000. However, approximately 6000 of

  14. Empowering Personalized Medicine with Big Data and Semantic Web Technology: Promises, Challenges, and Use Cases.

    Science.gov (United States)

    Panahiazar, Maryam; Taslimitehrani, Vahid; Jadhav, Ashutosh; Pathak, Jyotishman

    2014-10-01

    In healthcare, big data tools and technologies have the potential to create significant value by improving outcomes while lowering costs for each individual patient. Diagnostic images, genetic test results and biometric information are increasingly generated and stored in electronic health records presenting us with challenges in data that is by nature high volume, variety and velocity, thereby necessitating novel ways to store, manage and process big data. This presents an urgent need to develop new, scalable and expandable big data infrastructure and analytical methods that can enable healthcare providers access knowledge for the individual patient, yielding better decisions and outcomes. In this paper, we briefly discuss the nature of big data and the role of semantic web and data analysis for generating "smart data" which offer actionable information that supports better decision for personalized medicine. In our view, the biggest challenge is to create a system that makes big data robust and smart for healthcare providers and patients that can lead to more effective clinical decision-making, improved health outcomes, and ultimately, managing the healthcare costs. We highlight some of the challenges in using big data and propose the need for a semantic data-driven environment to address them. We illustrate our vision with practical use cases, and discuss a path for empowering personalized medicine using big data and semantic web technology.

  15. Presentations

    International Nuclear Information System (INIS)

    2007-01-01

    The presented materials consist of presentations of international workshop which held in Warsaw from 4 to 5 October 2007. Main subject of the meeting was progress in manufacturing as well as research program development for neutron detector which is planned to be placed at GANIL laboratory and will be used in nuclear spectroscopy research

  16. Evolution of nuclear reactor containments in India: Addressing the present day challenges

    Energy Technology Data Exchange (ETDEWEB)

    Kakodkar, Anil, E-mail: kakodkar@barc.gov.in

    2014-04-01

    Indigenously developed Pressurized Heavy Water Reactors (PHWRs) that form the backbone of current stage of nuclear power development in India have seen continuous evolution of their containment systems. This evolution that has taken place over implementation of 18 PHWRs (200/220/540 MWe) has encompassed all aspects of containment design, viz. the structural system, energy management system, radio-activity management and hydrogen management system. As a part of ongoing efforts toward strengthening of safety performance, India is also ready with the design of Advance Heavy Water Reactor (AHWR), which represents a technology demonstrator for advanced reactor systems and for thorium utilization. This reactor has a number of improved passive safety features and it is capable of meeting the demanding safety challenges that future reactor system would be expected to meet as a result of emerging expectations in the background of accidents over the past three decades viz. those at Three Mile Island (1979), Chernobyl (1986) and most recently at Fukushima (2011). In this lecture I shall focus on the evolution of nuclear reactor containments in India and highlight the design, associated structural and thermal hydraulics safety assessment made over the years for the improvement of containment performance.

  17. Seeds of Innovation: Three Years of the Technology Innovation Challenge Grant Program.

    Science.gov (United States)

    Harris, Larry A.

    This publication describes the 62 projects that received 5-year Technology Innovation Challenge Grants beginning in 1995, 1996, and 1997, with reviews of the projects occurring in late 1999 and early 2000. Part 1 of the report describes the Technology Innovation Challenge Grant (TICG) program and its importance. Part 2 contains the project…

  18. Ceramic Integration Technologies for Advanced Energy Systems: Critical Needs, Technical Challenges, and Opportunities

    Science.gov (United States)

    Singh, Mrityunjay

    2010-01-01

    Advanced ceramic integration technologies dramatically impact the energy landscape due to wide scale application of ceramics in all aspects of alternative energy production, storage, distribution, conservation, and efficiency. Examples include fuel cells, thermoelectrics, photovoltaics, gas turbine propulsion systems, distribution and transmission systems based on superconductors, nuclear power generation and waste disposal. Ceramic integration technologies play a key role in fabrication and manufacturing of large and complex shaped parts with multifunctional properties. However, the development of robust and reliable integrated systems with optimum performance requires the understanding of many thermochemical and thermomechanical factors, particularly for high temperature applications. In this presentation, various needs, challenges, and opportunities in design, fabrication, and testing of integrated similar (ceramic ceramic) and dissimilar (ceramic metal) material www.nasa.gov 45 ceramic-ceramic-systems have been discussed. Experimental results for bonding and integration of SiC based Micro-Electro-Mechanical-Systems (MEMS) LDI fuel injector and advanced ceramics and composites for gas turbine applications are presented.

  19. The evolution of medical imaging from qualitative to quantitative: opportunities, challenges, and approaches (Conference Presentation)

    Science.gov (United States)

    Jackson, Edward F.

    2016-04-01

    Over the past decade, there has been an increasing focus on quantitative imaging biomarkers (QIBs), which are defined as "objectively measured characteristics derived from in vivo images as indicators of normal biological processes, pathogenic processes, or response to a therapeutic intervention"1. To evolve qualitative imaging assessments to the use of QIBs requires the development and standardization of data acquisition, data analysis, and data display techniques, as well as appropriate reporting structures. As such, successful implementation of QIB applications relies heavily on expertise from the fields of medical physics, radiology, statistics, and informatics as well as collaboration from vendors of imaging acquisition, analysis, and reporting systems. When successfully implemented, QIBs will provide image-derived metrics with known bias and variance that can be validated with anatomically and physiologically relevant measures, including treatment response (and the heterogeneity of that response) and outcome. Such non-invasive quantitative measures can then be used effectively in clinical and translational research and will contribute significantly to the goals of precision medicine. This presentation will focus on 1) outlining the opportunities for QIB applications, with examples to demonstrate applications in both research and patient care, 2) discussing key challenges in the implementation of QIB applications, and 3) providing overviews of efforts to address such challenges from federal, scientific, and professional organizations, including, but not limited to, the RSNA, NCI, FDA, and NIST. 1Sullivan, Obuchowski, Kessler, et al. Radiology, epub August 2015.

  20. Challenges of the Unified Health System: present status of public laboratory services in 31 cities of Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Pedro Guatimosim Vidigal

    2014-04-01

    Full Text Available Introduction: Modifications in the Brazilian Unified Health System (SUS have led to a significant improvement in the national health indexes. However, some challenges still need to be faced, especially concerning SUS patients' access to high-quality laboratory support services.Objective: To evaluate the present status of laboratory services in SUS in 31 cities of Minas Gerais, Brazil, between 2008 and 2011.Material and method: This analysis was performed through data from the Information Technology Department of SUS (DATASUS and through interviews with local public health managers with structured questionnaires.Results: Among all the studied cities, 21 had their own laboratory, 90.2% of which were in precarious conditions, not meeting the requirements established by the legislation in force, and employing inappropriate procedures and techniques, in addition to using obsolete equipment. The range of available laboratory tests was limited, what demanded the services of supporting laboratories. None of the evaluated laboratories developed any systematic activity on quality management, including control of analytical quality, maintenance of laboratory equipment, calibration and performance evaluation of critical equipment, continuing education programs, and safety and biosecurity.Conclusion: The effective role of laboratory test results in medical decision is unquestionably impaired, risking the safety of SUS patients. The present work reveals the deficiencies of public laboratory services in Minas Gerais, and proposes a new management model, which is able to associate operational quality, technological development and optimization of human and material resources with higher productivity.

  1. Directional backlight liquid crystal autostereoscopic display: technical challenges, research progress, and prospect (Conference Presentation)

    Science.gov (United States)

    Fan, Hang; Li, Kunyang; Zhou, Yangui; Liang, Haowen; Wang, Jiahui; Zhou, Jianying

    2016-09-01

    Recent upsurge on virtual and augmented realities (VR and AR) has re-ignited the interest to the immerse display technology. The VR/AR technology based on stereoscopic display is believed in its early stage as glasses-free, or autostereoscopic display, will be ultimately adopted for the viewing convenience, visual comfort and for the multi-viewer purposes. On the other hand, autostereoscopic display has not yet received positive market response for the past years neither with stereoscopic displays using shutter or polarized glasses. We shall present the analysis on the real-world applications, rigid user demand, the drawbacks to the existing barrier- and lenticular lens-based LCD autostereoscopy. We shall emphasize the emerging autostereoscopic display, and notably on directional backlight LCD technology using a hybrid spatial- and temporal-control scenario. We report the numerical simulation of a display system using Monte-Carlo ray-tracing method with the human retina as the real image receiver. The system performance is optimized using newly developed figure of merit for system design. The reduced crosstalk in an autostereoscopic system, the enhanced display quality, including the high resolution received by the retina, the display homogeneity without Moiré- and defect-pattern, will be highlighted. Recent research progress including a novel scheme for diffraction-free backlight illumination, the expanded viewing zone for autostereoscopic display, and the novel Fresnel lens array to achieve a near perfect display in 2D/3D mode will be introduced. The experimental demonstration will be presented to the autostereoscopic display with the highest resolution, low crosstalk, Moiré- and defect- pattern free.

  2. Grand Challenges in Space Technology: Distributed Satellite Systems

    National Research Council Canada - National Science Library

    Miller, David

    2001-01-01

    The MITIAFRL Distributed Satellite Systems program examines the motivation, analysis and development of technology associated with the distribution of assets and functionality over a number of cooperating satellites...

  3. Technological challenges of third generation synchrotron radiation sources

    International Nuclear Information System (INIS)

    Cornacchia, M.; Winick, H.

    1990-01-01

    New ''third generation'' synchrotron radiation research facilities are now in construction in France, Italy, Japan, Taiwan and the USA. Designs for such facilities are being developed in several other countries. Third generation facilities are based on storage rings with low electron beam emittance and space for many undulator magnets to produce radiation with extremely high brightness and coherent power. Photon beam from these rings will greatly extend present research capabilities and open up new opportunities in imaging, spectroscopy, structural and dynamic studies and other applications. The technological problems of the third generation of synchrotron radiation facilities are reviewed. These machines are designed to emit radiation of very high intensity, extreme brightness, very short pulses, and partial coherence. These performance goals put severe requirements on the quality of the electron or positron beams. Phenomena affecting the injection process and the beam lifetime are discussed. Gas desorption by synchrotron radiation and collective effects play an important role. Low emittance lattices are more sensitive to quadrupole movements and at the same time, in order not to lose the benefits of high brilliance, require tighter tolerances on the allowed movement of the photon beam source. We discuss some of the ways that should be considered to extend the performance capabilities of the facilities in the future. 14 refs., 1 fig

  4. Development of ventricular assist devices in China: present status, opportunities and challenges.

    Science.gov (United States)

    Gu, Kaiyun; Chang, Yu; Gao, Bin; Wan, Feng; Loisance, Daniel; Zeng, Yi

    2014-08-01

    The growing number of heart failure patients and the scarcity of organ donors account for the huge need for the development of mechanical circulatory systems, including ventricular assist devices (VADs) and artificial hearts, in China. Several research programmes on blood pumps have been under way for the last three decades. However, unlike in other countries, the development of VADs has been extremely slow, and no system is currently approved and available for clinical application. There are many reasons for this situation. This article provides an overview of the present development of experimental and clinical research on VADs in China. In addition, the challenges for the clinical development of mechanical circulatory support in China are discussed. © The Author 2014. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

  5. Durban Institute of Technology's (DIT) response to the challenges of ...

    African Journals Online (AJOL)

    South African Journal of Higher Education ... Africa is clearly one that includes race, culture, language, gender, class, and the physically challenged. ... for access to the higher education workplace are complemented by openness to embrace ...

  6. Challenges Facing Adoption of Information Communication Technology in African Universities

    Science.gov (United States)

    Murgor, Titus Kiptoo

    2015-01-01

    A significant number of the universities and higher educational institutions have adopted the latest technology and implemented it productively, for the development of skilled human resource in respective area of specialization, as part of their responsibility. Information and communication Technology (ICT) has grown tremendously around the globe…

  7. The challenges of migration and technological development in Africa

    African Journals Online (AJOL)

    This paper critically studies he problems posed by migration and technological development in Africa. Migration and African technological development have been two paradoxical or polarized contemporary issues even in our 21st century Africa. Migration if not properly controlled has a deleterious implication that can ...

  8. The Indian nuclear power programme: Challenges in PHWR technology

    International Nuclear Information System (INIS)

    Prasad, Y.S.R.

    1997-01-01

    The long-term strategy for development of nuclear power generation in India is based on a three-stage programme, formulated by Dr. H.J. Bhabha. This strategy takes into account and is optimally suited for achieving self reliance in nuclear technology; India's technological infrastructure; limited resources of Natural Uranium and abundant availability of Thorium within the country

  9. Accelerator physics and technology challenges of very high energy hadron colliders

    Science.gov (United States)

    Shiltsev, Vladimir D.

    2015-08-01

    High energy hadron colliders have been in the forefront of particle physics for more than three decades. At present, international particle physics community considers several options for a 100 TeV proton-proton collider as a possible post-LHC energy frontier facility. The method of colliding beams has not fully exhausted its potential but has slowed down considerably in its progress. This paper briefly reviews the accelerator physics and technology challenges of the future very high energy colliders and outlines the areas of required research and development towards their technical and financial feasibility.

  10. A Foster Care Alumna’s Past and Present Technological Experience

    Directory of Open Access Journals (Sweden)

    Cesia Roche

    2015-04-01

    Full Text Available Research on technology use and access among youth raised in non-traditional family structures indicates that the youth’s experiences are different from individuals raised in traditional family structures. Foster care represents a non-traditional family structure that warrants research attention in terms of technology. Using a multicultural feminist framework, the present study explores the past and present technological experience of a woman (30 years old who was raised in the foster care system. The results are presented as a case study documenting her technological experience in foster care, as she transitioned out of the foster care system, and as she has taken on the roles of wife and mother. Results indicated that the participant had limited access to technology while in the foster care system, and this limited technology access related to her current use and perceptions of technology. Directions for future research are provided.

  11. Presentations

    International Nuclear Information System (INIS)

    2007-01-01

    The PARIS meeting held in Cracow, Poland from 14 to 15 May 2007. The main subjects discussed during this meeting were the status of international project dedicated to gamma spectroscopy research. The scientific research program includes investigations of giant dipole resonance, probe of hot nuclei induced in heavy reactions, Jacobi shape transitions, isospin mixing and nuclear multifragmentation. The mentioned programme needs Rand D development such as new scintillations materials as lanthanum chlorides and bromides as well as new photo detection sensors as avalanche photodiodes - such subjects are also subjects of discussion. Additionally results of computerized simulations of scintillation detectors properties by means of GEANT- 4 code are presented

  12. Science, technology and the 'grand challenge' of aging

    DEFF Research Database (Denmark)

    Jæger, Birgit; Peine, Alexander; Moors, Ellen

    2015-01-01

    In this paper, we introduce the themes addressed and the approaches used in this special issue. We start by briefly discussing the state of the art in research and policy making related to science, technology and ageing. We argue that an important gap characterizes this state of the art: current...... approaches do not consider material practice and materiality to be an inherent part of later life as constituted in contemporary societies. Science and Technology Studies (STS) provide both the theories and methods to address this gap, and thus deploy a theoretical and empirical understanding of science......, technology and ageing that captures how later life co-evolves with the practices of technology use and design. We briefly discuss how the articles in the collection each contribute to such an understanding across various locations. We conclude that, together, the contributions specify a perspective...

  13. Future challenges in single event effects for advanced CMOS technologies

    International Nuclear Information System (INIS)

    Guo Hongxia; Wang Wei; Luo Yinhong; Zhao Wen; Guo Xiaoqiang; Zhang Keying

    2010-01-01

    SEE have became a substantial Achilles heel for the reliability of space-based advanced CMOS technologies with features size downscaling. Future space and defense systems require identification and understanding of single event effects to develop hardening approaches for advanced technologies, including changes in device geometry and materials affect energy deposition, charge collection,circuit upset, parametric degradation devices. Topics covered include the impact of technology scaling on radiation response, including single event transients in high speed digital circuits, evidence for single event effects caused by proton direct ionization, and the impact for SEU induced by particle energy effects and indirect ionization. The single event effects in CMOS replacement technologies are introduced briefly. (authors)

  14. Technology and Military Doctrine. Essays on a Challenging Relationship

    National Research Council Canada - National Science Library

    Holley, I

    2004-01-01

    .... In these essays, Holley primarily addresses the need for the Air Force to adapt its doctrine and the processes of formulating and disseminating that guidance as the technology of air and space warfare improves. Dr...

  15. Simultaneous branchial cleft and thyroid disorders may present a management challenge.

    Science.gov (United States)

    Harding, Jane L; Veivers, David; Sidhu, Stan B; Sywak, Mark S; Shun, Albert; Delbridge, Leigh W

    2005-09-01

    Cysts, sinuses or abscesses arising from second, third or fourth branchial cleft remnants may lie either within the body of, or in close proximity to the thyroid gland. Given their infrequent nature they may pose both diagnostic and management challenges for the treating surgeon when they occur in association with thyroid disorders. This is a case series. All patients with concomitant thyroid disorders and a branchial cleft anomaly treated in the University of Sydney Endocrine Surgical Unit in the 10-year period 1994-2003 comprised the study group. Patient demographics, clinical presentation, imaging, surgical management, definitive histology and outcomes were documented. Six patients were identified with an age range of 3-76 years and a male : female ratio of 1:5. Five branchial cleft anomalies were left sided, one was right sided. Two patients had second cleft anomalies, both of which were initially thought to represent metastatic lymph nodes in association with thyroid cancer. A further two patients had third cleft abnormalities presenting as suppurative thyroiditis. The final two patients had fourth cleft abnormalities causing intraoperative management problems. Branchial cleft remnants and anomalies are rare but may occur in association with thyroid disease. They may pose a diagnostic and management dilemma either preoperatively, when mistaken for metastatic thyroid cancer, or intraoperatively when mistaken for a thyroid nodule.

  16. The challenge of making nuclear technologies acceptable, accessible and affordable

    International Nuclear Information System (INIS)

    Ramamurthy, V.S.

    2009-01-01

    Full text: It is more than five decades since the first successful demonstration of nuclear power for commercial electricity production. The same decades have also seen the successful demonstration of several other applications of nuclear technologies that can contribute directly to human development, as for example, in the Food and Agriculture, Human and animal Health, Environment and Water sectors. In spite of several successful demonstrations and applications in these fields, it is somewhat strange that their full potential is yet to be realized. More importantly, their availability to populations across the world is highly skewed. Three barriers have been identified for the wide spread use of nuclear technologies for development- Acceptability, Accessibility and Affordability. It is an unfortunate twist of fate that the first public demonstration of nuclear technology was its destructive power. The following demonization of anything nuclear was further compounded by the discussions on the unresolved questions on tackling long lived radioactive wastes, our inability to arrive at a global consensus on nuclear disarmament and issues of nuclear proliferation. These have certainly had a negative impact on the public acceptance of nuclear technologies across the board. While the recent concerns on the global climate change following the emission of carbon-di-oxide from excessive hydrocarbon burning for meeting our increasing energy needs have revived the interest in nuclear energy, a lot needs to be done to de-demonize nuclear technologies in public mind leading to increased acceptance of nuclear technologies for development. Lack of resources, infrastructure and trained man power also have a negative impact on the accessibility and affordability of the nuclear technologies for development. It is argued that only education holds the key for this. The role of international partnerships is also highlighted in realizing the full potential of nuclear technologies for

  17. Challenges of user-centred assistive technology provision in Australia: shopping without a prescription.

    Science.gov (United States)

    Steel, Emily J; Layton, Natasha Ann; Foster, Michele M; Bennett, Sally

    2016-01-01

    People with disability have a right to assistive technology devices and services, to support their inclusion and participation in society. User-centred approaches aim to address consumer dissatisfaction and sub-optimal outcomes from assistive technology (AT) provision, but make assumptions of consumer literacy and empowerment. Policy discourses about consumer choice prompt careful reflection, and this paper aims to provide a critical perspective on user involvement in assistive technology provision. User-centred approaches are considered, using literature to critically reflect on what user involvement means in AT provision. Challenges at the level of interactions between practitioners and consumers, and also the level of markets and policies are discussed, using examples from Australia. There is no unanimous conceptual framework for user-centred practice. Power imbalances and differing perspectives between practitioners and consumers make it difficult for consumers to feel empowered. Online access to information and international suppliers has not surmounted information asymmetries for consumers or lifted the regulation of publicly funded AT devices. Ensuring access and equity in the public provision of AT is challenging in an expanding market with diverse stakeholders. Consumers require personalised information and support to facilitate their involvement and choice in AT provision. Implications for Rehabilitation Variations in approaches informing AT provision practices have a profound impact on equity of access and outcomes for consumers. An internationalised and online market for AT devices is increasing the need for effective information provision strategies and services. Power imbalances between practitioners and consumers present barriers to the realisation of user-centred practice.

  18. Lessons learned and present day challenges of addressing 20th century radiation legacies of Russia and the United States

    International Nuclear Information System (INIS)

    Rengel, M.T.; Kristofzski, J.G.; Schubert, A.L.

    2002-01-01

    Decommissioning of nuclear submarines, disposal of highly enriched uranium and defense plutonium as well as processing of high-level wastes are among the most challenging issues of addressing radiation legacy of the 20th century. USA and Russia are the two primary countries that have to deal with the challenge and where most of the fissile materials to be processed are concentrated, nuclear fuel and high-level radioactive waste are stored, and multiple industrial sites and nuclear weapons production facilities are located. In the US, CH2M HILL is managing two of the most important nuclear projects being conducted by the US Department of Energy at the Rocky Flats Environmental Technology Site and at the DOE Hanford Site (177 underground tanks at this site contain 60 percent of the United States' high-level radioactive wastes). Within the framework of the Russian Federal special program 'Radioactive Waste and Spent Nuclear Materials Management, Utilization and Disposal for 1996-2005' works were carried out on the Karachai lake covering with soil, highly active radwaste vitrification and fractionation at the 'Mayak' combine. Currently there is a discussion of launching joint Russian-American initiatives including comparative studies of environmental and public health impacts from high-level waste vitrification and plutonium stabilization processes in Russia and high-level waste removal from tanks in the USA and of continuing comprehensive research with the RADSITE project (USA, European Union, Japan, China and India) using coordinated approaches in 2000-2003. This paper presents comparative studies, technical approaches, and regulatory strategies to address the challenges of managing and closing highly enriched uranium, plutonium, and high level waste sites. (author)

  19. A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges.

    Science.gov (United States)

    Hannan, M A; Abdulla Al Mamun, Md; Hussain, Aini; Basri, Hassan; Begum, R A

    2015-09-01

    In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challenges towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Cost-Effective Additive Manufacturing in Space: HELIOS Technology Challenge Guide

    Science.gov (United States)

    DeVieneni, Alayna; Velez, Carlos Andres; Benjamin, David; Hollenbeck, Jay

    2012-01-01

    Welcome to the HELIOS Technology Challenge Guide. This document is intended to serve as a general road map for participants of the HELIOS Technology Challenge [HTC] Program and the associated inaugural challenge: HTC-01: Cost-Effective Additive Manufacturing in Space. Please note that this guide is not a rule book and is not meant to hinder the development of innovative ideas. Its primary goal is to highlight the objectives of the HTC-01 Challenge and to describe possible solution routes and pitfalls that such technology may encounter in space. Please also note that participants wishing to demonstrate any hardware developed under this program during any future HELIOS Technology Challenge showcase event(s) may be subject to event regulations to be published separately at a later date.

  1. Science, Sport and Technology--A Contribution to Educational Challenges

    Science.gov (United States)

    O'Hara, Kelly; Reis, Paula; Esteves, Dulce; Bras, Rui; Branco, Luisa

    2011-01-01

    Improve students' ability to link knowledge with real life practice, through enhancing children or teenagers' ability to think critically by way of making observations, posing questions, drawing up hypotheses, planning and carrying out investigations, analysing data and therefore improve their decision making is an educational challenge. Learning…

  2. Technologies and challenges in large-scale phosphoproteomics

    DEFF Research Database (Denmark)

    Engholm-Keller, Kasper; Larsen, Martin Røssel

    2013-01-01

    become the main technique for discovery and characterization of phosphoproteins in a nonhypothesis driven fashion. In this review, we describe methods for state-of-the-art MS-based analysis of protein phosphorylation as well as the strategies employed in large-scale phosphoproteomic experiments...... with focus on the various challenges and limitations this field currently faces....

  3. Experience with modern technologies at collection, archiving and presentation of environmental data

    International Nuclear Information System (INIS)

    Bartok, J.

    2005-01-01

    This presentation contains solutions in the areas of collection, archiving and presentation of environmental data realised by the company MicroStep-MIS in the Slovakia and abroad. In the first part are characterised in brief used technologies. The second part contains some examples of application of these technologies in complexes monitoring networks

  4. Storing electricity, the technological challenge of the automotive sector

    International Nuclear Information System (INIS)

    Moulet, C.

    2010-01-01

    The search for alternatives to the internal combustion engine for motor vehicles may be nothing new, but the present focus on environmental issues (dwindling fossil fuel reserves, growing awareness of the environmental impact of the internal combustion engine, etc.) makes it more topical than ever. It is no coincidence that most manufacturers and OEMs on the automotive market, and many research centers, are studying the use of batteries and fuel cells as a means of developing greener, sustainable transport solutions for the future. The European Union is considering ways of compelling manufacturers to market vehicles that are more fuel-efficient at a time when the members of the European Automobile Manufacturers Association, unlike their counterparts in Japan, are failing to meet the targets defined in voluntary agreements. Through their sales of hybrid vehicles, Japanese manufacturers have lent credibility to the notion of a market for electrified vehicles. In this way, market constraints (environmental impact of the internal combustion engine, the cost of fossil fuel, consumers, and national or European lawmakers) will push the automotive industry into marketing 'low-carbon' vehicles in the very short term. Manufacturers' product plans reveal that a wave of electrified products can be expected on the market in 2015. That implies a significant R and D effort between now and 2012, with demonstrator vehicles up and running by 2013-2014 at the latest. So now is a crucial time for research organisations to position themselves in preparation for this emerging market. Industry is hoping for technological progress in areas that cut across these varying degrees of hybridisation and electrification, namely the storage and management of electrical energy and power electronics. It is these areas that will be at the heart of research programs. In these highly competitive times, efforts should focus on: - Lowering costs (by a factor of 5 to 10 for fuel cells and 2 to 4 for

  5. Another 25 Years of AIED? Challenges and Opportunities for Intelligent Educational Technologies of the Future

    Science.gov (United States)

    Pinkwart, Niels

    2016-01-01

    This paper attempts an analysis of some current trends and future developments in computer science, education, and educational technology. Based on these trends, two possible future predictions of AIED are presented in the form of a utopian vision and a dystopian vision. A comparison of these two visions leads to seven challenges that AIED might…

  6. Assessing Rare Metal Availability Challenges for Solar Energy Technologies

    Directory of Open Access Journals (Sweden)

    Leena Grandell

    2015-08-01

    Full Text Available Solar energy is commonly seen as a future energy source with significant potential. Ruthenium, gallium, indium and several other rare elements are common and vital components of many solar energy technologies, including dye-sensitized solar cells, CIGS cells and various artificial photosynthesis approaches. This study surveys solar energy technologies and their reliance on rare metals such as indium, gallium, and ruthenium. Several of these rare materials do not occur as primary ores, and are found as byproducts associated with primary base metal ores. This will have an impact on future production trends and the availability for various applications. In addition, the geological reserves of many vital metals are scarce and severely limit the potential of certain solar energy technologies. It is the conclusion of this study that certain solar energy concepts are unrealistic in terms of achieving TW scales.

  7. A Concise Presentation of Doubly Fed Induction Generator Wind Energy Conversion Systems Challenges and Solutions

    Directory of Open Access Journals (Sweden)

    Julius Mwaniki

    2017-01-01

    Full Text Available There is increased worldwide wind power generation, a large percentage of which is grid connected. The doubly fed induction generator (DFIG wind energy conversion system (WECS has many merits and, as a result, large numbers have been installed to date. The DFIG WECS operation, under both steady state and fault conditions, is of great interest since it impacts on grid performance. This review paper presents a condensed look at the various applied solutions to the challenges of the DFIG WECS including maximum power point tracking, common mode voltages, subsynchronous resonance, losses, modulation, power quality, and faults both internal and from the grid. It also looks at approaches used to meet the increasingly stringent grid codes requirements for the DFIG WECS to not only ride through faults but also provide voltage support. These are aspects of the DFIG WECS that are critical for system operators and prospective investors and can also serve as an introduction for new entrants into this area of study.

  8. The Value Chain Approach in One Health: Conceptual Framing and Focus on Present Applications and Challenges.

    Science.gov (United States)

    Antoine-Moussiaux, Nicolas; Peyre, Marisa; Bonnet, Pascal; Bebay, Charles; Bengoumi, Mohammed; Tripodi, Astrid

    2017-01-01

    The value chain (VC) is a major operational concept for socioeconomic analysis at meso level. Widely mobilized in development practice, it is still undergoing conceptual and practical refining, e.g., to take account of environmental and social sustainability. Briefly, VC refers to a system of value creation through the full set of actors, links, technical and commercial activities and flows involved in the provision of a good or service on a market. In the past decade, this concept has been promoted in the management of animal health. In particular, the emergence of highly pathogenic avian influenza (HPAI) has triggered an interdisciplinary dynamic including VC analysis as a central tool. These efforts promoted participatory investigation methods in the analysis of health systems. Using qualitative and quantitative data, these methods acknowledge the usefulness of actors' involvement and knowledge, hence facilitating the transdisciplinarity needed for effective action. They fit into adaptive and action-oriented strategies, fostering stakeholders' participation. Recent research on HPAI surveillance in South-East Asia merged VC and participatory approaches to develop innovative tools for analyzing constraints to information flow. On-going interventions for HPAI prevention and control as well as the prevention of other emerging zoonotic risks in Africa are presently building on this VC framework to develop strategies for its application at national and regional scales. Based on the latter experiences, this article proposes a field-based perspective on VC applications to animal and public health systems, within a One Health approach responding to the overall challenge of complexity.

  9. Proceedings of the meeting and scientific presentations on basic science research and nuclear technology

    International Nuclear Information System (INIS)

    Prayitno; Slamet Santosa; Darsono; Syarip; Agus Taftazani; Samin; Tri Mardji Atmono; Dwi Biyantoro; Herry Poernomo; Prajitno; Tjipto Sujitno; Gede Sutresna W; Djoko Slamet Pujorahardjo; Budi Setiawan; Bambang Siswanto; Endro Kismolo; Jumari

    2016-08-01

    The Proceedings of the Meeting and Scientific Presentations on Basic Science Research and Nuclear Technology by Center for Accelerator Science and Technology in Yogyakarta with the theme of Universities and research and development institutions synergy in the development of basic science and nuclear technology held on Surakarta 9 August 2016. This seminar is an annual routine activities of Center for Accelerator Science and Technology for exchange research result among University and BATAN researcher for using nuclear technology. The proceeding consist of 3 article from keynotes’ speaker and 37 articles from BATAN participant as well as outside which have been indexed separately. (MPN)

  10. Pedagogical and Technological Challenges in on/off Campus Education

    DEFF Research Database (Denmark)

    Borch, Ole; Knudsen, Morten; Rokkjær, Ole

    2004-01-01

    the individual learning process. Experiences from distance education in individual learning are fine since individual learning responsibilities are natural leaving out alternative learning options. On-campus students did not benefit from the new method and especially the challenges expected to support...... and development. This requires new competences in the learning organization, and the problem is if the willingess for changes exists among staff and in the organization as long as competition from the educational market is small...

  11. Pedagogical and technological challenges in on/off campus education

    DEFF Research Database (Denmark)

    Borch, Ole; Knudsen, Morten Haack; Rokkjær, Ole

    2004-01-01

    the individual learning process. Experiences from distance education in individual learning are fine since individual learning responsibilities are natural leaving out alternative learning options. On-campus students did not benefit from the new method and especially the challenges expected to support...... and development. This requires new competences in the learning organization, and the problem is if the willingness for changes exists among staff and in the organization as long as competition from the educational market is small...

  12. How Developments in Psychology and Technology Challenge Validity Argumentation

    Science.gov (United States)

    Mislevy, Robert J.

    2016-01-01

    Validity is the sine qua non of properties of educational assessment. While a theory of validity and a practical framework for validation has emerged over the past decades, most of the discussion has addressed familiar forms of assessment and psychological framings. Advances in digital technologies and in cognitive and social psychology have…

  13. Religious Education and Information Technology: Challenges and Problems

    Science.gov (United States)

    Sajjadi, Seyed Mahdi

    2008-01-01

    With advances in information technology, the velocity of information production on the global level has expanded as well. This acceleration has led to the delegitimizing of knowledge, the equating of information with knowledge, and the giving of predominance to information rather than knowledge. This advance has created epistemological challenges…

  14. A propulsion technology challenge — An abortable. Continuous use vehicle

    Science.gov (United States)

    Czysz, Paul A.; Froning, H. David

    1996-02-01

    Propulsion is the enabling technology for an abortable, continuous use vehicle. Propulsion performance purchases margin in the other material, structural, and system requirements. But what is abortability, and continuous use? Why is it necessary? What are its characteristics? And, what specifically is required in the propulsion system to enable these characteristics? Is the cost of the launcher really trivial, or is that the incomplete cost analysis limited to expendables and rebuilt, reusables. This paper identifies what constitutes an abortable, continuous use vehicle, the propulsion characteristics required, and the technology necessary to provide those characteristics. The proposition resulting is that this is not a technology issue, it is a concept of operation and a bureaucratic issue. The required goal is not as distant as some might propose, and the technology not as unprepared for commercial application as some assumed. The conclusion is that clearly we cannot continue to base the next century's orbital operations on an expendable rebuilt for reuse concept. What is required is a rocket based combined cycle (RBCC) engine based on those now in space operation 1,2; not a combination of cycles that remains to be shown as a practical, achievable reality.

  15. technology transfer and the challenges of local content development ...

    African Journals Online (AJOL)

    Programme) and the internalization of input in the industry by increasing the ... institutional framework as well as attitudinal changes are identified as critical to the successful ... interaction involving some form of technology- ..... engagement of Nigerians as employees, the .... Indeed the performance of Nigeria over the past.

  16. Technology Transfer and the Challenges of Local Content ...

    African Journals Online (AJOL)

    With over fifty years of oil industry operation in Nigeria, the sector is still largely foreign-technology driven. The national government's involvement has been classified into three distinct era: (1) The Era of Royalty (1956-1970) when government played passive facilitative role limited to the collection of royalties, rents, taxes ...

  17. Managing the human side of information technology: challenges and solutions

    National Research Council Canada - National Science Library

    Szewczak, Edward; Snodgrass, Coral

    2002-01-01

    ... the potential of [IT] in support of managerial activities. The days of identifying computer-based information systems as only a collection of hardware and software are gone. In order to be able to achieve greater utilization of this technology, there must be much more emphasis given to the value of individuals who handle and use information res...

  18. Dental laboratory technology education in China: current situation and challenges.

    Science.gov (United States)

    Zheng, Liwei; Yue, Li; Zhou, Min; Yu, Haiyang

    2013-03-01

    Modern dentistry and dental education in China were first introduced from abroad by Dr. Lindsay in 1907. However, advancements in the field of dental laboratory technology did not occur to the same degree in specialties such as prosthodontics and orthodontics. Since the 1990s, orders from abroad demanding dental appliances surged as the image of China as the "world's factory" strengthened. The assembly line model, in which technicians work like simple procedure workers, was rapidly applied to denture production, while the traditional education system and apprenticeship systems demonstrated little progress in these years. The lack of advancement in dental laboratory technology education caused insufficient development in China's dental technology industry. In order to alter the situation, a four-year dental laboratory technology undergraduate educational program was established in 2005 by West China School of Stomatology, Sichuan University (WCSS, SCU). This program was based on SCU's undergraduate education and WCSS's junior college education systems. The program introduced scientific methods in relevant subjects into laboratory technicians' training and made many improvements in the availability of trained faculty, textbooks, laboratory facilities, and curriculum.

  19. Microscale technology and biocatalytic processes: Opportunities and challenges for synthesis

    DEFF Research Database (Denmark)

    Wohlgemuth, Roland; Plazl, Igor; Žnidaršič-Plazl, Polona

    2015-01-01

    Despite the expanding presence of microscale technology in chemical synthesis and energy production as well as in biomedical devices and analytical and diagnostic tools, its potential in biocatalytic processes for pharmaceutical and fine chemicals, as well as related industries, has not yet been...

  20. Households' use of information and communication technologies - a future challenge for energy savings?

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Jesper Ole; Haunstrup Christensen, Toke; Gram-Hanssen, Kirsten (Danish Building Research Inst., Aalborg Univ., Aalborg (Denmark)). e-mail: joj@sbi.dk; Roepke, Inge (Dept. of Management Engineering, Aalborg Univ., Aalborg (Denmark))

    2009-07-01

    Increasing consumption of electricity due to a growing number of information and communication technology (ICT) appliances in households is a major challenge to reducing energy consumption. Several studies have predicted escalating ICT-related energy consumption, but relatively little has been said and done about possible initiatives to curb this increase. This paper presents results of a research project focusing on how dynamics of consumption influence household energy consumption on ICT. Results of the project include scenarios on how electricity consumption on ICT is expected to grow, suggesting that in a few years on average ICT will make up half of household electricity consumption. Recent initiatives from various actors to prevent this development are presented and discussed, and difficulties in regulating this area, as compared to other parts of household electricity consumption are highlighted. Through presentation and discussion of qualitative interviews with families having extensive ICT use in their everyday lives, the interviews illustrate how users domesticate and use technologies in many different ways. The interviews reveal a variety of practices and dynamics in different aspects of everyday life, including sport, shopping, entertainment and different hobbies. The growing electricity consumption related to ICT is thus as dependent on the consumers' use and domestication of the technologies as on the energy efficiency of the appliances. By analysing the interviews with the use of theories of domestication of technologies, it is argued that aspects such as consumers' creativity in technology use and their non-adaption are relevant aspects to include in policy and regulation discussions on how to limit the escalating electricity consumption from household ICT use.

  1. Is Technology Present in Frailty? Technology a Back-up Tool for Dealing with Frailty in the Elderly: A Systematic Review.

    Science.gov (United States)

    Mugueta-Aguinaga, Iranzu; Garcia-Zapirain, Begonya

    2017-04-01

    This study analyzes the technologies used in dealing with frailty within the following areas: prevention, care, diagnosis and treatment. The aim of this paper is, on the one hand, to analyze the extent to which technology is present in terms of its relationship with frailty and what technological resources are used to treat it. Its other purpose is to define new challenges and contributions made by physiotherapy using technology. Eighty documents related to research, validation and/or the ascertaining of different types of hardware, software or both were reviewed in prominent areas. The authors used the following scales: in the area of diagnosis, Fried's phenotype model of frailty and a model based on trials for the design of devices. The technologies developed that are based on these models accounted for 55% and 45% of cases respectively. In the area of prevention, the results proved similar regarding the use of wireless sensors with cameras (35.71%), and Kinect™ sensors (28.57%) to analyze movements and postures that indicate a risk of falling. In the area of care, results were found referring to the use of different motion, physiological and environmental wireless sensors (46,15%), i.e. so-called smart homes. In the area of treatment, the results show with a percentage of 37.5% that the Nintendo ® Wii™ console is the most used tool for treating frailty in elderly persons. Further work needs to be carried out to reduce the gap existing between technology, frail elderly persons, healthcare professionals and carers to bring together the different views about technology. This need raises the challenge of developing and implementing technology in physiotherapy via serious games that may via play and connectivity help to improve the functional capacity, general health and quality of life of frail individuals.

  2. Packaging Technologies for 500 C SiC Electronics and Sensors: Challenges in Material Science and Technology

    Science.gov (United States)

    Chen, Liang-Yu; Neudeck, Philip G.; Behelm, Glenn M.; Spry, David J.; Meredith, Roger D.; Hunter, Gary W.

    2015-01-01

    This paper presents ceramic substrates and thick-film metallization based packaging technologies in development for 500C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550C. The 96 alumina packaging system composed of chip-level packages and PCBs has been successfully tested with high temperature SiC discrete transistor devices at 500C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC junction field-effect-transistor (JFET) with a packaging system composed of a 96 alumina chip-level package and an alumina printed circuit board was tested on low earth orbit for eighteen months via a NASA International Space Station experiment. In addition to packaging systems for electronics, a spark-plug type sensor package based on this high temperature interconnection system for high temperature SiC capacitive pressure sensors was also developed and tested. In order to further significantly improve the performance of packaging system for higher packaging density, higher operation frequency, power rating, and even higher temperatures, some fundamental material challenges must be addressed. This presentation will discuss previous development and some of the challenges in material science (technology) to improve high temperature dielectrics for packaging applications.

  3. PHYSICAL AND HEALTH EDUCATION FACING THE TECHNOLOGY CHALLENGE

    Directory of Open Access Journals (Sweden)

    Cristiana Lucretia Pop

    2016-04-01

    Full Text Available Purpose: This essay aims to signal up the detrimental effects of sedentary behaviours determined by extensive use of technology. Material: The paper is a survey of the most relevant data related to physical inactivity consequences with a specific reference to the Eastern Europe countries. Results. There is no doubt that children and young people will prefer the technology and its commodities, but they need to be encouraged to practice exercise, to control their posture and weight. Physical activity favorably influences on mental health and reduces the incidence and severity of diseases and pathological conditions, such as cardiovascular disease, type II diabetes, osteoarthritis, osteoporosis and obesity. Conclusions. Promoting physical activity as a healthy life style component in schools and in universities targets the enhancement of vigour, resilience, employement and social outcomes for graduates and comunities.

  4. Enabling technologies built on a sonochemical platform: challenges and opportunities.

    Science.gov (United States)

    Cintas, Pedro; Tagliapietra, Silvia; Caporaso, Marina; Tabasso, Silvia; Cravotto, Giancarlo

    2015-07-01

    Scientific and technological progress now occurs at the interface between two or more scientific and technical disciplines while chemistry is intertwined with almost all scientific domains. Complementary and synergistic effects have been found in the overlay between sonochemistry and other enabling technologies such as mechanochemistry, microwave chemistry and flow-chemistry. Although their nature and effects are intrinsically different, these techniques share the ability to significantly activate most chemical processes and peculiar phenomena. These studies offer a comprehensive overview of sonochemistry, provide a better understanding of correlated phenomena (mechanochemical effects, hot spots, etc.), and pave the way for emerging applications which unite hybrid reactors. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Microscale technology and biocatalytic processes: opportunities and challenges for synthesis.

    Science.gov (United States)

    Wohlgemuth, Roland; Plazl, Igor; Žnidaršič-Plazl, Polona; Gernaey, Krist V; Woodley, John M

    2015-05-01

    Despite the expanding presence of microscale technology in chemical synthesis and energy production as well as in biomedical devices and analytical and diagnostic tools, its potential in biocatalytic processes for pharmaceutical and fine chemicals, as well as related industries, has not yet been fully exploited. The aim of this review is to shed light on the strategic advantages of this promising technology for the development and realization of biocatalytic processes and subsequent product recovery steps, demonstrated with examples from the literature. Constraints, opportunities, and the future outlook for the implementation of these key green engineering methods and the role of supporting tools such as mathematical models to establish sustainable production processes are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Technological developments and safeguards instrumentation: Responding to new challenges

    International Nuclear Information System (INIS)

    Naito, K.; Rundquist, D.E.

    1994-01-01

    Entering the 1990s, technological tools that were in the research and development stage not so long ago are changing the way inspectors are able to verify nuclear materials at many facilities around the world. Many new instruments - ranging from advanced video monitoring systems to miniature detectors and analysers - already are in place. In some cases, they have been custom-made for specific safeguards tasks, or for placement in locations, such as underwater storage pools for spent reactor fuel, where inspectors cannot go. Standing behind the development of many of these new safeguards instruments are a number of factors. They include: technological advances In computer related fields, such as microprocessing and electronics, and specific areas of instrumentation; technical developments in the nuclear industry and Efficiency improvements and efforts to reduce the costs of safeguards implementation

  7. Plasma technology: a technical economical and political challenge

    International Nuclear Information System (INIS)

    Abreu, V.A. de; Vicente, L.C.; Bender, O.W.; Sanches Junior, O.

    1987-01-01

    To survey the State of the Art and Technic in Material, Process and Products by Plasma, it was needed to assemble economic, political and managerial variables that will affect the absortion and implantation of this technology in Brazil. Through a survey in industries, universities, research centers, energy agencies and financial and forster institutions it was possible to build a frame that gave us conditions to forecasting and suggest some mesures to Plasma sector. (author) [pt

  8. Simulation: Moving from Technology Challenge to Human Factors Success

    International Nuclear Information System (INIS)

    Gould, Derek A.; Chalmers, Nicholas; Johnson, Sheena J.; Kilkenny, Caroline; White, Mark D.; Bech, Bo; Lonn, Lars; Bello, Fernando

    2012-01-01

    Recognition of the many limitations of traditional apprenticeship training is driving new approaches to learning medical procedural skills. Among simulation technologies and methods available today, computer-based systems are topical and bring the benefits of automated, repeatable, and reliable performance assessments. Human factors research is central to simulator model development that is relevant to real-world imaging-guided interventional tasks and to the credentialing programs in which it would be used.

  9. Between tradition and technological innovation: challenges to lime Heritage conservation

    Directory of Open Access Journals (Sweden)

    Marluci Menezes

    2016-01-01

    Full Text Available The aim is to discuss the relationship between traditional and scientific technological knowledge as innovative and fundamental to heritage conservation. It is argued that this innovation does not necessarily come from scientific knowledge, but potentially from a wise articulation between these two types of knowledge. This discussion starts from an already long process of reflection on lime heritage conservation, as developed in LNEC from research projects.

  10. Technology, Applications, and Process Challenges of Dual Chamber Systems.

    Science.gov (United States)

    Werk, Tobias; Ludwig, Imke S; Luemkemann, Joerg; Mahler, Hanns-Christian; Huwyler, Joerg; Hafner, Mathias

    2016-01-01

    Dual-chamber systems provide an option as a drug and device combination product, when home care and emergency lyophilized products are intended. Nevertheless, until today, there are only a few products on the market, due to the challenges and limitations in manufacturability, product formulation, and product stability in a dual-chamber configuration, as well as economic considerations. This review serves to describe currently available dual-chamber systems and to discuss factors to be considered for appropriate selection and establishing fill-finish processes. Copyright © 2016. Published by Elsevier Inc.

  11. Reserve growth during financial volatility in a technologically challenging world

    Science.gov (United States)

    Klett, Timothy R.; Gautier, Donald L.

    2010-01-01

    Reserve growth (growth-to-known) is the addition of oil and gas quantities to reported proved or proved-plus-probable reserves in discovered fields. The amount of reserve growth fluctuates through time with prevailing economic and technological conditions. Most reserve additions are the result of investment in field operations and in development technology. These investments can be justified by higher prices of oil and gas, the desire to maintain cash flow, and by greater recovery efficiency in well established fields. The price/cost ratio affects decisions for field abandonment and (or) implementation of improved recovery methods. Although small- to medium-size fields might show higher percentages of reserve growth, a relatively few giant fields contribute most volumetric reserve growth, indicating that companies may prefer to invest in existing fields with low geologic and production risk and an established infrastructure in order to increase their price/cost relationship. Whereas many previous estimates of reserve growth were based on past trends of reported reserves, future reserve growth is expected to be greatly affected by financial volatility and fluctuating economic and technological conditions.

  12. Technological aspects of hospital communication challenges: an observational study.

    Science.gov (United States)

    Popovici, Ilinca; Morita, Plinio P; Doran, Diane; Lapinsky, Stephen; Morra, Dante; Shier, Ashleigh; Wu, Robert; Cafazzo, Joseph A

    2015-06-01

    To gain insights into how technological communication tools impact effective communication among clinicians, which is critical for patient safety. This multi-site observational study analyzes inter-clinician communication and interaction with information technology, with a focus on the critical process of patient transfer from the Emergency Department to General Internal Medicine. Mount Sinai Hospital, Sunnybrook Health Sciences Centre and Toronto General Hospital. At least five ED and general internal medicine nurses and physicians directly involved in patient transfers were observed on separate occasions at each institution. N/A. N/A. The study provides insight into clinician workflow, evaluates current hospital communication systems and identifies key issues affecting communication: interruptions, issues with numeric pagers, lack of integrated communication tools, lack of awareness of consultation status, inefficiencies related to the paper chart, unintuitive user interfaces, mixed use of electronic and paper systems and lack of up-to-date contact information. It also identifies design trade-offs to be negotiated: synchronous communication vs. reducing interruptions, notification of patient status vs. reducing interruptions and speed vs. quality of handovers. The issues listed should be considered in the design of new technology for hospital communications. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

  13. Lightweight, High Strength Metals With Enhanced Radiation Shielding - Technology Advancing Partnerships Challenge

    Data.gov (United States)

    National Aeronautics and Space Administration — The Technology Advancing Partnership (TAP) Challenge will seek to foster innovation throughout the Center by allowing the KSC workforce to identify a specific...

  14. The challenge of monitoring the cryosphere in alpine environments: Prepare the present for the future

    Science.gov (United States)

    Fischer, Andrea; Helfricht, Kay; Seiser, Bernd; Stocker-Waldhuber, Martin; Hartl, Lea; Wiesenegger, Hans

    2017-04-01

    Understanding the interaction of mountain glaciers and permafrost with weather and climate is essential for the interpretation of past states of the cryosphere in terms of climate change. Most of the glaciers and rock glaciers in Eastern Alpine terrain are subject to strong gradients in climatic forcing, and the persistence of these gradients under past climatic conditions is, more or less, unknown. Thus a key challenge of monitoring the cryosphere is to define the demands on a monitoring strategy for capturing essential processes and their potential changes. For example, the effects of orographic precipitation and local shading vary with general circulation patterns and the amount of solar radiation during the melt(ing) season. Recent investigations based on the Austrian glacier inventories have shown that glacier distribution is closely linked to topography and climatic situation, and that these two parameters imply also different sensitivities of the specific glaciers to progressing climate change. This leads to the need to develop a monitoring system capturing past, but also fairly unknown future ensembles of climatic state and sensitivities. As a first step, the Austrian glacier monitoring network has been analyzed from the beginning of the records onwards. Today's monitoring network bears the imprints of past research interests, but also past funding policies and personal/institutional engagements. As a limitation for long term monitoring in general, today's monitoring strategies have to cope with being restricted to these historical commitments to preserve the length of the time series, but at the same time expanding the measurements to fulfil present and future scientific and societal demands. The decision on cryospheric benchmark sites has an additional uncertainty: the ongoing disintegration of glaciers, their increasing debris cover as well as the potential low ice content and relatively unknown reaction of rock glaciers in the course of climate change

  15. Key Success Factors in the Brazilian Coffee Agrichain: Present and Future Challenges

    Directory of Open Access Journals (Sweden)

    Luciana Florêncio de Almeida

    2017-01-01

    Full Text Available Coffee production has grown 100% in volume over the past 30 years, accounting for 144 million coffee bags produced in 2015. Brazil responded to 42% of this production, along with Vietnam (19%, Colombia (9%, Indonesia (8%, and Ethiopia (4% (OIC, 2016. Following this pace, the consumption expanded not only in such traditional markets as the United States (4.2 kg/year, Germany (6.9 kg/year, and France (5.7 kg/year but also in tea-driven markets, such as Japan, Korea, Russia, and China (CECAFE, 2013. In 2015, Brazil harvested 43.2 million 60-kg bags of green coffee, 32 million of which were of Arabica coffee and 11.2 million of a Conilon species (CONAB, 2016. The planted area in Brazil is 2.3 million hectares, and there are about 287,000 producers, predominantly mini- and small farmers. Having continental dimensions, the country presents a variety of climates, reliefs, altitudes, and latitudes that allow the production of a wide range of types and qualities of coffee (MAPA, 2016. This research aimed to clarify present and future challenges for the Brazilian coffee agrichain, considering the growing demand and also competitiveness between the coffee countries’ producers. To capture the vivid perception of the actors in the coffee chain, a qualitative approach was employed. The research was conducted in three phases. In the first phase, 10 coffee specialists were interviewed to identify the coffee sector’s main milestones for Brazil over the next 30 years. The findings culminated in eight key success factors for coffee-farming management. Finally, in the second phase, the results of phase two were submitted for analysis by 39 coffee farmers through three discussion panels held in the major producing regions: Sul de Minas (corresponding to 25% of the national production, Cerrado Mineiro (with 10%, and Matas de Minas (with 16% (MAPA, 2016. The third phase comprised the data analysis, aggregating the patterns by regions and by critical factors. The

  16. A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges

    International Nuclear Information System (INIS)

    Hannan, M.A.; Abdulla Al Mamun, Md.; Hussain, Aini; Basri, Hassan; Begum, R.A.

    2015-01-01

    Highlights: • Classification of available technologies for SWM system in four core category. • Organization of technology based SWM systems in three main groups. • Summary of SWM systems with target application, methodology and functional domain. • Issues and challenges are highlighted for further design of a sustainable system. - Abstract: In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challenges towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system

  17. A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges

    Energy Technology Data Exchange (ETDEWEB)

    Hannan, M.A., E-mail: hannan@eng.ukm.my [Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia); Abdulla Al Mamun, Md., E-mail: md.abdulla@siswa.ukm.edu.my [Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia); Hussain, Aini, E-mail: aini@eng.ukm.my [Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia); Basri, Hassan, E-mail: drhb@ukm.my [Department of Civil and Structural Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia); Begum, R.A., E-mail: rawshan@ukm.edu.my [Institute of Climate Change, Universiti Kebangsaan Malaysia, Bangi, Selangor DE (Malaysia)

    2015-09-15

    Highlights: • Classification of available technologies for SWM system in four core category. • Organization of technology based SWM systems in three main groups. • Summary of SWM systems with target application, methodology and functional domain. • Issues and challenges are highlighted for further design of a sustainable system. - Abstract: In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challenges towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system.

  18. Technology-Based Healthcare for Nursing Education Within The Netherlands: Past, Present and Future.

    Science.gov (United States)

    Koster, Ybranda; van Houwelingen, Cornelis T M

    2017-01-01

    At the present time, nearly all Dutch nursing schools are searching for suitable ways to implement technology-based healthcare in their curriculum. Some Universities chose elective education, others a mandatory solution. Several studies were executed to determine competencies needed by nurses in order to work with technology-based healthcare. In 2016 a nationwide new curriculum for nurses has been published. Providing technology-based healthcare is included under the core competencies of this new curriculum. All baccalaureate nursing educational institutes must implement this new curriculum at the start of 2016 which will have a huge impact on the implementation of technology-based healthcare in the education programs. In the future, technology centers from Universities will collaborate and specialize, partner with technology companies and crossovers between information and communication technology and healthcare education will be expanded.

  19. Does nanobiotechnology oversight present a uniquely complex challenge to interagency cooperation?

    International Nuclear Information System (INIS)

    Karkkainen, Bradley C.

    2011-01-01

    Numerous regulatory and oversight challenges exist in the field of nanobiotechnology. Although these challenges may appear novel and complex, similar issues have plagued environmental regulation since the 1970 s. This article argues that complexity, uncertainty, and regulatory gaps are common problems in environmental regulation, and that the lessons learned and progress made during more than 40 years of environmental regulation can serve as a guidepost for addressing nanobiotechnology regulation and oversight issues.

  20. The Value Chain Approach in One Health: Conceptual Framing and Focus on Present Applications and Challenges

    Directory of Open Access Journals (Sweden)

    Nicolas Antoine-Moussiaux

    2017-12-01

    Full Text Available The value chain (VC is a major operational concept for socioeconomic analysis at meso level. Widely mobilized in development practice, it is still undergoing conceptual and practical refining, e.g., to take account of environmental and social sustainability. Briefly, VC refers to a system of value creation through the full set of actors, links, technical and commercial activities and flows involved in the provision of a good or service on a market. In the past decade, this concept has been promoted in the management of animal health. In particular, the emergence of highly pathogenic avian influenza (HPAI has triggered an interdisciplinary dynamic including VC analysis as a central tool. These efforts promoted participatory investigation methods in the analysis of health systems. Using qualitative and quantitative data, these methods acknowledge the usefulness of actors’ involvement and knowledge, hence facilitating the transdisciplinarity needed for effective action. They fit into adaptive and action-oriented strategies, fostering stakeholders’ participation. Recent research on HPAI surveillance in South-East Asia merged VC and participatory approaches to develop innovative tools for analyzing constraints to information flow. On-going interventions for HPAI prevention and control as well as the prevention of other emerging zoonotic risks in Africa are presently building on this VC framework to develop strategies for its application at national and regional scales. Based on the latter experiences, this article proposes a field-based perspective on VC applications to animal and public health systems, within a One Health approach responding to the overall challenge of complexity.

  1. Challenges for present and future estimates of anthropogenic carbon in the Indian Ocean

    Science.gov (United States)

    Goyet, C.; Touratier, F.

    One of the main challenges we face today is to determine the evolution of the penetration of anthropogenic CO2 into the Indian Ocean and its impacts on marine and human life. Anthropogenic CO2 reaches the ocean via air-sea interactions as well as riverine inputs. It is then stored in the ocean and follows the oceanic circulation. As the carbon dioxide from the atmosphere penetrates into the sea, it reacts with water and acidifies the ocean. Consequently, the whole marine ecosystem is perturbed, thus potentially affecting the food web, which has, in turn, a direct impact on seafood supply for humans. Naturally, this will mainly affect the growing number of people living in coastal areas. Although anthropogenic CO2 in the ocean is identical with natural CO2 and therefore cannot be detected alone, many approaches are available today to estimate it. Since most of the results of these methods are globally in agreement, here we chose one of these methods, the tracer using oxygen, total inorganic carbon, and total alkalinity (TrOCA) approach, to compute the 3-D distribution of the anthropogenic CO2 concentrations throughout the Indian Ocean. The results of this distribution clearly illustrate the contrast between the Arabian Sea and the Bay of Bengal. They further show the importance of the southern part of this ocean that carries some anthropogenic CO2 at great depths. In order to determine the future anthropogenic impacts on the Indian Ocean, it is urgent and necessary to understand the present state. As the seawater temperature increases, how and how fast will the ocean circulation change? What will the impacts on seawater properties be? Many people are living on the bordering coasts, how will they be affected?

  2. Proceeding on the scientific meeting and presentation on accelerator technology and its applications: physics, nuclear reactor

    International Nuclear Information System (INIS)

    Pramudita Anggraita; Sudjatmoko; Darsono; Tri Marji Atmono; Tjipto Sujitno; Wahini Nurhayati

    2012-01-01

    The scientific meeting and presentation on accelerator technology and its applications was held by PTAPB BATAN on 13 December 2011. This meeting aims to promote the technology and its applications to accelerator scientists, academics, researchers and technology users as well as accelerator-based accelerator research that have been conducted by researchers in and outside BATAN. This proceeding contains 23 papers about physics and nuclear reactor. (PPIKSN)

  3. Proceeding on the Scientific Meeting and Presentation on Accelerator Technology and Its Applications

    International Nuclear Information System (INIS)

    Susilo Widodo; Darsono; Slamet Santosa; Sudjatmoko; Tjipto Sujitno; Pramudita Anggraita; Wahini Nurhayati

    2015-11-01

    The scientific meeting and presentation on accelerator technology and its applications was held by PSTA BATAN on 30 November 2015. This meeting aims to promote the technology and its applications to accelerator scientists, academics, researchers and technology users as well as accelerator-based accelerator research that have been conducted by researchers in and outside BATAN. This proceeding contains 20 papers about physics and nuclear reactor. (PPIKSN)

  4. Contemporary challenges to the Church Mission from the perspective of post-modern art and technology

    Directory of Open Access Journals (Sweden)

    Gheorghe Istodor

    2015-11-01

    Full Text Available The secular challenges coming from postmodern art and postmodern technology constitute a serious challenge to be addressed by the mission and life of the Church. The distortion of the Christian Orthodox teaching and the blasphemous trends coming from the contemporary art scene is adding to the distortion of man as God’s special creation from the point of view of genetic engineering, biotechnology, and artificial intelligence, as the core elements of God’s empowerment of man through technology.

  5. International conference on challenges faced by technical and scientific support organizations in enhancing nuclear safety. Contributed papers and presentations

    International Nuclear Information System (INIS)

    2007-01-01

    Over the past two decades, the IAEA has conducted a series of major conferences that have addressed topical issues and strategies critical to nuclear safety for consideration by the world's nuclear regulators. More recently, the IAEA organized the International Conference on Effective Nuclear Regulatory Systems - Facing Safety and Security Challenges, held in Moscow in 2006. The Moscow conference was the first of its kind, because it brought together senior regulators of nuclear safety, radiation safety and security from around the world to discuss how to improve regulatory effectiveness with the objective of improving the protection of the public and the users of nuclear and radioactive material. The International Conference on Challenges Faced by Technical and Scientific Support Organizations in Enhancing Nuclear Safety was held in Aix-en-Provence, France, from 23 to 27 April 2007. This conference, again, was the first of its kind, because it was the first to address technical and scientific support organizations (TSOs), the role they play in supporting either the national regulatory bodies or the industry in making optimum safety decisions and the challenges they face in providing this support. This conference provided a forum for the TSOs to discuss these and other issues with the organizations to which they provide this support - that is, the regulators and the operators/industry - as well as with other stakeholders such as research organizations and public authorities. This conference can also be considered to have a link to the Moscow conference. The Moscow conference concluded that effective regulation of nuclear safety is vital for the safe use of nuclear energy and associated technologies, both now and in the future, and is an essential prerequisite for establishing an effective Global Nuclear Safety Regime. The Moscow conference also highlighted the importance of continued and improved international cooperation in the area of nuclear safety. These

  6. Challenges for Technological Development in China’s Industry

    OpenAIRE

    Cao, Cong

    2008-01-01

    Since the late 1970s, and especially during the 1990s, foreign direct investment (FDI) has to a large extent recast China’s industrial base and upgraded its industrial technology. In 2001, China became the country with the highest number of mobile phone subscribers with 145 million users, and its 179 million fixed phone lines were the second highest, next to the United States. By 2010, if not earlier, and, after overtaking Japan in 2002, China is expected to overtake the United States to bec...

  7. Panel - Ethics in modern universities of technology : Challenges of the 21st century

    NARCIS (Netherlands)

    Engel-Hills, Penelope; Hillerbrand, Rafaela; Rip, Arie; Sunderland, Mary; Taebi, Behnam; Werker, Claudia; Wineberg, Chris

    2014-01-01

    The challenges of the 21st century will fully reflect on universities of technology. The world population is growing while we pursue higher levels of global well-being. The increasing energy demands and the resulting problems of climate change will be only two of the many major challenges humanity

  8. Planning to Explore: Using a Coordinated Multisource Infrastructure to Overcome Present and Future Space Flight Planning Challenges

    Data.gov (United States)

    National Aeronautics and Space Administration — Few human endeavors present as much of a planning and scheduling challenge as space flight, particularly manned space flight. Just on the operational side of it,...

  9. Student Teachers' Perceptions on Educational Technologies' Past, Present and Future

    Science.gov (United States)

    Orhan Goksun, Derya; Filiz, Ozan; Kurt, Adile Askim

    2018-01-01

    The aim of this study is to reveal Computer Education and Instructional Technologies student teachers', who are in a distance teacher education program, perceptions on past, present and educational technologies of future via infographics. In this study, 54 infographics, which were created by student teachers who were enrolled in Special Teaching…

  10. Future of printing: changes and challenges, technologies and markets

    Science.gov (United States)

    Kipphan, Helmut

    1998-01-01

    Digitalization within the graphic arts industry is described and it is explained how it is improving and changing the print production strategies and which new kinds of print production systems are developed or can be expected. The relationship of printed media and electronic media is analyzed and a positioning for the next century is given. The state of the art of conventional printing technologies, especially using direct imagine techniques, and their position within the digital workflow are shortly described. Non-impact printing multicolor printing systems are explained, based on general design criteria and linked to existing and newly announced equipment. The use of high-tech components for building up successful systems with high reliability, high quality and low production costs is included with some examples. Digital printing systems open many opportunities in print production: distributed printing, personalization, print and book on demand are explained as examples. The overview of the several printing technologies and their positioning regarding quality and productivity leads to the scenario about the important position of printed media, also in the distant future.

  11. New tuberculosis technologies: challenges for retooling and scale-up.

    Science.gov (United States)

    Pai, M; Palamountain, K M

    2012-10-01

    The availability of new tools does not mean that they will be adopted, used correctly, scaled up or have public health impact. Experience to date with new diagnostics suggests that many national tuberculosis programmes (NTPs) in high-burden countries are reluctant to adopt and scale up new tools, even when these are backed by evidence and global policy recommendations. We suggest that there are several common barriers to effective national adoption and scale-up of new technologies: global policy recommendations that do not provide sufficient information for scale-up, complex decision-making processes and weak political commitment at the country level, limited engagement of and support to NTP managers, high cost of tools and poor fit with user needs, unregulated markets and inadequate business models, limited capacity for laboratory strengthening and implementation research, and insufficient advocacy and donor support. Overcoming these barriers will require enhanced country-level advocacy, resources, technical assistance and political commitment. Some of the BRICS (Brazil, Russia, India, China, South Africa) countries are emerging as early adopters of policies and technologies, and are increasing their investments in TB control. They may provide the first opportunities to fully assess the public health impact of new tools.

  12. The Challenges and Benefits of Using Computer Technology for Communication and Teaching in the Geosciences

    Science.gov (United States)

    Fairley, J. P.; Hinds, J. J.

    2003-12-01

    The advent of the World Wide Web in the early 1990s not only revolutionized the exchange of ideas and information within the scientific community, but also provided educators with a new array of teaching, informational, and promotional tools. Use of computer graphics and animation to explain concepts and processes can stimulate classroom participation and student interest in the geosciences, which has historically attracted students with strong spatial and visualization skills. In today's job market, graduates are expected to have knowledge of computers and the ability to use them for acquiring, processing, and visually analyzing data. Furthermore, in addition to promoting visibility and communication within the scientific community, computer graphics and the Internet can be informative and educational for the general public. Although computer skills are crucial for earth science students and educators, many pitfalls exist in implementing computer technology and web-based resources into research and classroom activities. Learning to use these new tools effectively requires a significant time commitment and careful attention to the source and reliability of the data presented. Furthermore, educators have a responsibility to ensure that students and the public understand the assumptions and limitations of the materials presented, rather than allowing them to be overwhelmed by "gee-whiz" aspects of the technology. We present three examples of computer technology in the earth sciences classroom: 1) a computer animation of water table response to well pumping, 2) a 3-D fly-through animation of a fault controlled valley, and 3) a virtual field trip for an introductory geology class. These examples demonstrate some of the challenges and benefits of these new tools, and encourage educators to expand the responsible use of computer technology for teaching and communicating scientific results to the general public.

  13. From Stove-pipe to Network Centric Leveraging Technology to Present a Unified View

    National Research Council Canada - National Science Library

    Abuhantash, Medhat A; Shoultz, Matthew V

    2004-01-01

    .... The paper will also demonstrate how the application of current technology can be leveraged to present a unified view of data from disparate data sources, and how our organization is leveraging...

  14. Entrepreneurs and New Communication Technology: Obstacle or Challenge?

    Directory of Open Access Journals (Sweden)

    Gujić Martina

    2016-09-01

    Full Text Available Entrepreneurship represents a certain way of thinking and type of behaviour; it’s a continuous search for new ideas, creativity, proactivity and initiative in achieving goals. A successful promotion of an entrepreneurial idea is achieved through marketing communication with consumers. The purpose of this empirical research was to discover the extent in which entrepreneurs use social networks as a new form of communicating with consumers. A total of 172 companies have given information through a specifically designed questionnaire. Research has shown a difference in the extent of using social networks between domestic and foreign owned companies. Moreover, companies with more educated staff have proven to be more open towards accepting information technology in their business activities. This research hasn’t shown significant statistical differences between different age groups.

  15. Emerging technologies and challenges for better and safer drugs.

    Science.gov (United States)

    Theodosiou, Maria; Amir-Aslani, Arsia; Mégarbane, Bruno

    2014-04-01

    Regardless of stringent safety regulations and increased compound selectivity by pharmaceutical companies, prediction of toxicity in humans is still far from perfect and adverse drug reactions are still detected after drug marketing. High costs of failures due to toxicity has led pharmaceutical companies to search for screening methods that would allow detection of toxicity issues at an early stage and improve their preclinical and clinical toxicology. Thanks to the last decade's biotechnology revolution, new technologies like toxicogenomics have demonstrated the capacity to improve toxicity assessment. However, our understanding of toxicological mechanisms is still incomplete and a wide range of approaches must be used to gain insight into toxicity issues. Consequently, an array of in silico, in vitro and in vivo methods is utilized to predict toxicity and its causative mechanisms, improving drug development processes and minimizing costs of failure.

  16. A Pedagogical Framework for Technology Integration in ESL Classrooms: The Promises and Challenges of Integration

    Science.gov (United States)

    Yang, Sha; Walker, Victoria

    2015-01-01

    Technologies have the potential to support language teaching and learning, but English as a Second Language (ESL) teachers in the United States (U.S.) either sparingly use technologies for instruction or use them at low level. Although previous research has indicated some promises and challenges faced by U.S. ESL teachers with integrating…

  17. Insights into the Intrinsic and Extrinsic Challenges for Implementing Technology Education: Case Studies of Queensland Teachers

    Science.gov (United States)

    Finger, Glenn; Houguet, Belinda

    2009-01-01

    This study, embedded within the "Researching School Change in Technology Education" (RSCTE) project in Queensland, Australia, aimed to gain insights into the intrinsic and extrinsic challenges experienced by teachers during the implementation of technology education within primary school settings. The official publication and launch of…

  18. About Place and Role of Information and Communication Technologies, Information Security at the Present Stage

    Directory of Open Access Journals (Sweden)

    Alexander A. Galushkin

    2015-12-01

    Full Text Available In the present article author considers questions of importance of information and communication technologies in modern information society and about information security. In the course of the research the author analyzes opinions both known Russian, and famous foreign scientists and practicians from various countries of the world (Italy, the USA, Portugal, etc.. Author emphasizes importance of information and communication technologies at the present stage of development of society and state.

  19. E-Learning in Supplemental Educational Systems in Taiwan: Present Status and Future Challenges

    Science.gov (United States)

    Zhang, Ke; Hung, Jui-Long

    2009-01-01

    As Taiwan's full-scale e-learning initiatives moved to the seventh year in 2009, the current status and challenges of e-learning development there are yet to be fully understood. Further extending Zhang and Hung's (2006) investigation on e-learning in all universities and colleges in Taiwan, this study investigated the after-school programs (ASPs)…

  20. U.S. Experiences and Regulatory Challenges with New Medical Technologies

    International Nuclear Information System (INIS)

    Elee, J.

    2016-01-01

    There are many challenges in regulating new medical technologies in the United States. In the US, there are fifty different state agencies, several local and city agencies, and eleven federal agencies which all delve into some aspects of regulating the use of radiation. It also can take several years to promulgate new regulations for new technologies. Additionally, some technologies are used outside of their original approved/intended use which causes issues for regulators. Finally, many of our regulating agencies have limited resources to learn and train on the new technologies that are on the market. All of these reasons combine to make regulating new technologies and uses of radiation difficult. (author)

  1. Challenges, Strategies and Techniques for International Training in Technology for Cultural Heritage Conservation

    Science.gov (United States)

    Eppich, R.; Almagro Vidal, A.

    2013-07-01

    Technology to document and investigate cultural heritage sites is rapidly advancing - multispectral and high dynamic range imaging, spherical high resolution photography, three-dimensional laser scanning and unmanned aerial vehicles are only a few of the new technologies available to heritage conservation professionals to record monuments, buildings, city centres and landscapes. These advanced tools are giving architects, engineers and conservation professionals' new insights and additional information which helps to make better informed decisions. But this technology and the knowledge about its correct use are extremely unevenly distributed across the world. The Digital Divide is present and growing in the field of cultural heritage preservation (Letellier, 2001). Many of those responsible for the management, maintenance and care of some of the world's most significant cultural heritage sites do not have access to or information about the latest technologies. They are also confronted with an overwhelming assortment of new technologies and consultants or developers that promote them and therefore must allocate their limited budgets with limited information. What is to be done about bridging this gap? Obviously cost and accessibility are issues. However one of the most important challenges to be addressed is education. As the base knowledge of these technologies is very uneven this leads to further questions: Are there strategies or methodologies for teaching this technology? How to combine and balance different professional backgrounds from different and so unevenly distributed places around the world and provide them all with useful information to make good documentation and conservation decisions? This paper will describe the methodology developed over the last ten years in teaching documentation technologies to diverse groups of cultural heritage professionals and students from Côte d'Ivoire, Germany, Belgium, Kosovo, Albania, Nigeria, Egypt, Japan, Iraq

  2. Opportunities and Challenges of Using Technology in Mathematics Education of Creative Technical Studies

    DEFF Research Database (Denmark)

    Triantafyllou, Eva; Timcenko, Olga

    2014-01-01

    This paper explores the opportunities and challenges of integrating technology to support mathematics teaching and learning in creative engineer- ing disciplines. We base our discussion on data from our research in the Media Technology department of Aalborg University Copenhagen, Denmark. Our ana...... analysis proposes that unlike in other engineering disciplines, technology in these disciplines should be used for contextualizing mathematics rather than in- troducing and exploring mathematical concepts....

  3. Implementation of machine learning for high-volume manufacturing metrology challenges (Conference Presentation)

    Science.gov (United States)

    Timoney, Padraig; Kagalwala, Taher; Reis, Edward; Lazkani, Houssam; Hurley, Jonathan; Liu, Haibo; Kang, Charles; Isbester, Paul; Yellai, Naren; Shifrin, Michael; Etzioni, Yoav

    2018-03-01

    In recent years, the combination of device scaling, complex 3D device architecture and tightening process tolerances have strained the capabilities of optical metrology tools to meet process needs. Two main categories of approaches have been taken to address the evolving process needs. In the first category, new hardware configurations are developed to provide more spectral sensitivity. Most of this category of work will enable next generation optical metrology tools to try to maintain pace with next generation process needs. In the second category, new innovative algorithms have been pursued to increase the value of the existing measurement signal. These algorithms aim to boost sensitivity to the measurement parameter of interest, while reducing the impact of other factors that contribute to signal variability but are not influenced by the process of interest. This paper will evaluate the suitability of machine learning to address high volume manufacturing metrology requirements in both front end of line (FEOL) and back end of line (BEOL) sectors from advanced technology nodes. In the FEOL sector, initial feasibility has been demonstrated to predict the fin CD values from an inline measurement using machine learning. In this study, OCD spectra were acquired after an etch process that occurs earlier in the process flow than where the inline CD is measured. The fin hard mask etch process is known to impact the downstream inline CD value. Figure 1 shows the correlation of predicted CD vs downstream inline CD measurement obtained after the training of the machine learning algorithm. For BEOL, machine learning is shown to provide an additional source of information in prediction of electrical resistance from structures that are not compatible for direct copper height measurement. Figure 2 compares the trench height correlation to electrical resistance (Rs) and the correlation of predicted Rs to the e-test Rs value for a far back end of line (FBEOL) metallization level

  4. The Nuclear Education and Staffing Challenge: Rebuilding Critical Skills in Nuclear Science and Technology

    International Nuclear Information System (INIS)

    Wogman, Ned A.; Bond, Leonard J.; Waltar, Alan E.; Leber, R E.

    2005-01-01

    The United States, the Department of Energy (DOE) and its National Laboratories, including the Pacific Northwest National Laboratory (PNNL), are facing a serious attrition of nuclear scientists and engineers and their capabilities through the effects of aging staff. Within the DOE laboratories, 75% of nuclear personnel will be eligible to retire by 2010. It is expected that there will be a significant loss of senior nuclear science and technology staff at PNNL within five years. PNNL's nuclear legacy is firmly rooted in the DOE Hanford site, the World War II Manhattan Project, and subsequent programs. Historically, PNNL was a laboratory were 70% of its activities were nuclear/radiological, and now just under 50% of its current business science and technology are nuclear and radiologically oriented. Programs in the areas of Nuclear Legacies, Global Security, Nonproliferation, Homeland Security and National Defense, Radiobiology and Nuclear Energy still involve more than 1,000 of the 3,800 current laboratory staff, and these include more than 420 staff who are certified as nuclear/radiological scientists and engineers. This paper presents the current challenges faced by PNNL that require an emerging strategy to solve the nuclear staffing issues through the maintenance and replenishment of the human nuclear capital needed to support PNNL nuclear science and technology programs

  5. Applying ultrasonic in-line inspection technology in a deep water environment: exploring the challenges

    Energy Technology Data Exchange (ETDEWEB)

    Thielager, N.; Nadler, M.; Pieske, M.; Beller, M. [NDT Systems and Services AG, Stutensee (Germany)

    2009-12-19

    The demand for higher inspection accuracies of in-line inspection tools (ILI tools) is permanently growing. As integrity assessment procedures are being refined, detection performances, sizing accuracies and confidence levels regarding detection and sizing play an ever increasing role. ILI tools utilizing conventional ultrasound technology are at the forefront of technology and fulfill the market requirements regarding sizing accuracies and the ability to provide quantitative measurements of wall thickness as well as crack inspection capabilities. Data from ultrasonic tools is ideally suited for advanced integrity assessment applications and run comparisons. Making this technology available for a deep-water environment of heavy wall, high pressures and temperatures comes with a wide range of challenges which have to be addressed. This paper will introduce developments recently made in order to adapt and modify ultrasonic in-line inspection tools for the application in a heavy wall, high pressure and high temperature environment as encountered in deep offshore pipelines. The paper will describe necessary design modifications and new conceptual approaches especially regarding tool electronics, cables, connectors and the sensor carrier. A tool capable of deep-water inspection with a pressure bearing capability of 275 bar will be introduced and data from inspection runs will be presented. As an outlook, the paper will also discuss future inspection requirements for offshore pipelines with maximum pressure values of up to 500 bar. (author)

  6. Technological incorporation in the Unified Health System (SUS: the problem and ensuing challenges

    Directory of Open Access Journals (Sweden)

    Reinaldo Guimarães

    2014-12-01

    Full Text Available Technological incorporation is a central topic among the concerns regarding health care systems. This paper discusses the role of technology dynamics in health systems' cost increases, suggesting two different approaches - a 'pragmatic-economic' approach and a 'rational-defensive' approach - as guidelines to explain the reasons for this centrality. The paper shows how judicialization results from this situation and discusses two doctrinal views - 'reserve for contingencies' and 'rational use' - as the views that usually guide the debates in the courts and among health policy makers. The paper suggests that the attitude currently prevalent in the Brazilian judiciary system can prejudice the principle of equity by improperly evaluating the principle of integrality. We present a brief genealogy of HTA and a timeline of HTA in Brazil. We also discuss the relevance and the impact of Law 12401/2011, which regulates the principle of integrality in the Unified Health System (SUS and propose three challenges to the development of HTA actions aiming at technology incorporation in Brazil. Finally, we discuss the entry and the role of private health insurance companies, emphasizing changes in the scenario and in their position.

  7. The Nuclear Education and Staffing Challenge: Rebuilding Critical Skills in Nuclear Science and Technology

    International Nuclear Information System (INIS)

    Wogman, Ned A.; Bond, Leonard J.; Waltar, Alan E.; Leber, R E.

    2005-01-01

    The United States, the Department of Energy (DOE) and its National Laboratories, including the Pacific Northwest National Laboratory (PNNL), are facing a serious attrition of nuclear scientists and engineers and their capabilities through the effects of aging staff. Within the DOE laboratories, 75% of nuclear personnel will be eligible to retire by 2010. It is expected that there will be a significant loss of senior nuclear science and technology staff at PNNL within five years. PNNL's nuclear legacy is firmly rooted in the DOE Hanford site, the World War II Manhattan Project, and subsequent programs. Historically, PNNL was a laboratory where 70% of its activities were nuclear/radiological, and now just under 50% of its current business science and technology are nuclear and radiologically oriented. Programs in the areas of Nuclear Legacies, Global Security, Nonproliferation, Homeland Security and National Defense, Radiobiology and Nuclear Energy still involve more than 1,000 of the 3,800 current laboratory staff, and these include more than 420 staff who are certified as nuclear/radiological scientists and engineers. This paper presents the current challenges faced by PNNL that require an emerging strategy to solve the nuclear staffing issues through the maintenance and replenishment of the human nuclear capital needed to support PNNL nuclear science and technology programs

  8. The nuclear education and staffing challenge: Rebuilding critical skills in nuclear science and technology

    International Nuclear Information System (INIS)

    Wogman, N.A.; Bond, L.J.; Waltar, A.E.; Leber, R.E.

    2005-01-01

    The United States, the Department of Energy (DOE) and its National Laboratories, including the Pacific Northwest National Laboratory (PNNL), are facing a serious attrition of nuclear scientists and engineers and their capabilities through the effects of aging staff. Within the DOE laboratories, 75% of nuclear personnel will be eligible to retire by 2010. It is expected that there will be a significant loss of senior nuclear science and technology staff at PNNL within five years. PNNL's nuclear legacy is firmly rooted in the DOE Hanford site, the World War II Manhattan Project, and subsequent programs. Historically, PNNL was a laboratory where 70% of its activities were nuclear/radiological, and now just under 50% of its current business science and technology are nuclear and radiologically oriented. Programs in the areas of nuclear legacies, global security, nonproliferation, homeland security and national defense, radiobiology and nuclear energy still involve more than 1,000 of the 3,800 current laboratory staff, and these include more than 420 staff who are certified as nuclear/radiological scientists and engineers. Current challenges faced by PNNL that require an emerging strategy to solve the nuclear staffing issues through the maintenance and replenishment of the human nuclear capital needed to support PNNL nuclear science and technology programs are presented. (author)

  9. Photonic band gap materials: Technology, applications and challenges

    International Nuclear Information System (INIS)

    Johri, M.; Ahmed, Y.A.; Bezboruah, T.

    2006-05-01

    Last century has been the age of Artificial Materials. One material that stands out in this regard is the semiconductor. The revolution in electronic industry in the 20th century was made possible by the ability of semiconductors to microscopically manipulate the flow of electrons. Further advancement in the field made scientists suggest that the new millennium will be the age of photonics in which artificial materials will be synthesized to microscopically manipulate the flow of light. One of these will be Photonic Band Gap material (PBG). PBG are periodic dielectric structures that forbid propagation of electromagnetic waves in a certain frequency range. They are able to engineer most fundamental properties of electromagnetic waves such as the laws of refraction, diffraction, and emission of light from atoms. Such PBG material not only opens up variety of possible applications (in lasers, antennas, millimeter wave devices, efficient solar cells photo-catalytic processes, integrated optical communication etc.) but also give rise to new physics (cavity electrodynamics, localization, disorder, photon-number-state squeezing). Unlike electronic micro-cavity, optical waveguides in a PBG microchip can simultaneously conduct hundreds of wavelength channels of information in a three dimensional circuit path. In this article we have discussed some aspects of PBG materials and their unusual properties, which provided a foundation for novel practical applications ranging from clinical medicine to information technology. (author)

  10. Disability, technology and e-learning: challenging conceptions

    Directory of Open Access Journals (Sweden)

    Jane Seale

    2006-12-01

    Full Text Available In considering the role that technology and e-learning can play in helping students access higher education and an effective learning experience, a large amount of the current research and practice literature focuses almost exclusively on accessibility legislation, guidelines and standards, and the rules contained within them (Abascal et al., 2004; Chisholm & Brewer, 2005; Gunderson & May, 2005; Paolucci, 2004; Reed et al., 2004; Slatin, 2005. One of the major problems of such an approach is that it has drawn higher education practitioners into thinking that their objective is to comply with rules. I argue that it is not (Seale, 2006. The objective should be to address the needs of students. The danger of only focusing on rules is that it can constrain thinking and therefore practice. We need to expand our thinking beyond that of how to comply with rules, towards how to meet the needs of students with disabilities, within the local contexts that students and practitioners are working. In thinking about how to meet the needs of students with disabilities, practitioners will need to develop their own tools. These tools might be user case studies, evaluation methodologies or conceptualizations:

  11. Technological advances in radiotherapy of rectal cancer: opportunities and challenges.

    Science.gov (United States)

    Appelt, Ane L; Sebag-Montefiore, David

    2016-07-01

    This review summarizes the available evidence for the use of modern radiotherapy techniques for chemoradiotherapy for rectal cancer, with specific focus on intensity-modulated radiotherapy (IMRT) and volumetric arc therapy (VMAT) techniques. The dosimetric benefits of IMRT and VMAT are well established, but prospective clinical studies are limited, with phase I-II studies only. Recent years have seen the publication of a few larger prospective patient series as well as some retrospective cohorts, several of which include much needed late toxicity data. Overall results are encouraging, as toxicity levels - although varying across reports - appear lower than for 3D conformal radiotherapy. Innovative treatment techniques and strategies which may be facilitated by the use of IMRT/VMAT include simultaneously integrated tumour boost, adaptive treatment, selective sparing of specific organs to enable chemotherapy escalation, and nonsurgical management. Few prospective studies of IMRT and VMAT exist, which causes uncertainty not just in regards to the clinical benefit of these technologies but also in the optimal use. The priority for future research should be subgroups of patients who might receive relatively greater benefit from innovative treatment techniques, such as patients receiving chemoradiotherapy with definitive intent and patients treated with dose escalation.

  12. Public attitudes in relation to the risks presented by new technologies

    International Nuclear Information System (INIS)

    Cave, L.; Holmes, R.E.; Holmes, P.J.

    1978-01-01

    Studies on societal attitudes during the nineteenth century to risks introduced by new technologies indicate that the present day reluctance on the part of society to accept a level of risk, which on a national basis appears to be insignificant, in order to have the benefits of a new technology at a reasonable cost, may not be a new phenomenon. Conditions are postulated in which historical data on public attitudes to risk are valid, and the application of this approach is illustrated by a study of societal attitudes in the nineteenth century to the risks presented by the new technology of railway travel in the United Kingdom. It is concluded that the interpretation of relevant data from the abundant historical records available may provide a valuable insight into the reaction of society to present-day and future technological risks

  13. Present technologies and the next future in Mexico for the power generation starting from fossil fuels

    International Nuclear Information System (INIS)

    Gonzalez S, J.M.

    1999-01-01

    A brief analysis is done of the expected evolution of the world energy and electrical energy demand and a projection of the Mexican electrical demand is presented. Typical data for electric power generation technologies that currently in use or under development are presented and a discussion is made of the factors that influence technology selection, particularly for fossil fuel technologies. Taking into account the current expansion plans of the Mexican electrical sector, and proposing some reasonable hypotheses about the behavior of the factors that were identified, the evolution of the electrical demand in Mexico up to the year 2020 is presented, showing the installed capacity expected for each fuel and for each technology. At the end the needs for research and development in the area of power generation, emphasizing the Mexican R and D Programs, are discussed. (Author)

  14. GREEN TECHNOLOGY FORESIGHT OF HIGH TECHNOLOGY: HYPE OR POTENTIALS - THE CHALLENGES FROM NANOTECHNOLOGY, BIOTECHNOLOGY AND ICT

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    2004-01-01

    The paper describes the theoretical and methodological approach in an ongoing Danish technology foresight project focusing on the environmental potentials and risks of nanotechnology, biotechnology, and information and communication technology (ICT). The paper gives a short overview of some...

  15. Ontology-based semantic information technology for safeguards: opportunities and challenges

    International Nuclear Information System (INIS)

    McDaniel, Michael

    2014-01-01

    The challenge of efficiently handling large volumes of heterogeneous information is a barrier to more effective safeguards implementation. With the emergence of new technologies for generating and collecting information this is an issue common to many industries and problem domains. Several diverse information‑intensive fields are developing and adopting ontology‑based semantic information technology solutions to address issues of information integration, federation and interoperability. Ontology, in this context, refers to the formal specification of the content, structure, and logic of knowledge within a domain of interest. Ontology‑based semantic information technologies have the potential to impact nearly every level of safeguards implementation, from information collection and integration, to personnel training and knowledge retention, to planning and analysis. However, substantial challenges remain before the full benefits of semantic technology can be realized. Perhaps the most significant challenge is the development of a nuclear fuel cycle ontology. For safeguards, existing knowledge resources such as the IAEA’s Physical Model and established upper level ontologies can be used as starting points for ontology development, but a concerted effort must be taken by the safeguards community for such an activity to be successful. This paper provides a brief background of ontologies and semantic information technology, demonstrates how these technologies are used in other areas, offers examples of how ontologies can be applied to safeguards, and discusses the challenges of developing and implementing this technology as well as a possible path forward.

  16. Technology as a Time Challenge: Study, Concept and Types of Technology

    Directory of Open Access Journals (Sweden)

    Vadim M. Rozin

    2017-09-01

    Full Text Available In the article divorce the concepts of engineering and technology. Designated four stages of technological development: the fi rst phase — “pilot technique”, it is characterized by magical conceptualization, the second — engineering (rational conceptualization, third design, fourth technology. For technical equipment is characterized by four features: technology is the artifacts, the technique can be considered as a “social body” of a person or society, technology is a useful way to use the forces of nature, and fi nally, the mediation in the form of tools, machines, and material environment that allows you to implement the ideas of man. It is argued that the conceptualization of technology is the essential characteristic of the concept. If you write, for example, about the technology of the Neolithic age or era of construction of the Egyptian pyramids, then we are talking about retrospective interpretation, from the point of view of modern understanding of technology. It’s not useless, for example, to determine preconditions of formation technology, but in terms of thinking creates problems and contradictions. The author argues that technology develops in the second half of the eighteenth century as a new reality, which describes the industrial activities in language operations and their conditions of division of labor and management. At the same time, technology is being characterized by the installation of quality, savings, standardization, and rational description of the production processes, their optimization for the training of new technologists. Discusses three stages of development of the technology and features of the main types of technology: production technology, engineering, large techno-social projects, global technology. Considering the author and the conditions of the development of new technologies. These include “technological zone of proximal development”, as well as two situation — relevant issues and

  17. Attacks on public telephone networks: technologies and challenges

    Science.gov (United States)

    Kosloff, T.; Moore, Tyler; Keller, J.; Manes, Gavin W.; Shenoi, Sujeet

    2003-09-01

    Signaling System 7 (SS7) is vital to signaling and control in America's public telephone networks. This paper describes a class of attacks on SS7 networks involving the insertion of malicious signaling messages via compromised SS7 network components. Three attacks are discussed in detail: IAM flood attacks, redirection attacks and point code spoofing attacks. Depending on their scale of execution, these attacks can produce effects ranging from network congestion to service disruption. Methods for detecting these denial-of-service attacks and mitigating their effects are also presented.

  18. New calorimeters for space experiments: physics requirements and technological challenges

    Science.gov (United States)

    Marrocchesi, Pier Simone

    2015-07-01

    Direct measurements of charged cosmic radiation with instruments in Low Earth Orbit (LEO), or flying on balloons above the atmosphere, require the identification of the incident particle, the measurement of its energy and possibly the determination of its sign-of-charge. The latter information can be provided by a magnetic spectrometer together with a measurement of momentum. However, magnetic deflection in space experiments is at present limited to values of the Maximum Detectable Rigidity (MDR) hardly exceeding a few TV. Advanced calorimetric techniques are, at present, the only way to measure charged and neutral radiation at higher energies in the multi-TeV range. Despite their mass limitation, calorimeters may achieve a large geometric factor and provide an adequate proton background rejection factor, taking advantage of a fine granularity and imaging capabilities. In this lecture, after a brief introduction on electromagnetic and hadronic calorimetry, an innovative approach to the design of a space-borne, large acceptance, homogeneous calorimeter for the detection of high energy cosmic rays will be described.

  19. International Workshop on Exotic Hadronic Atoms, Deeply Bound Kaonic Nuclear States and Antihydrogen : Present Results, Future Challenges

    CERN Document Server

    Widmann, E; Curceanu, C; Trento 2006; Trento06

    2006-01-01

    These are the miniproceedings of the workshop "Exotic hadronic atoms, deeply bound kaonic nuclear states and antihydrogen: present results, future challenges," which was held at the European Centre for Theoretical Nuclear Physics and Related Studies (ECT*), Trento (Italy), June 19-24, 2006. The document includes a short presentation of the topics, the list of participants, and a short contribution from each speaker.

  20. Anticipating the Future, Influencing the Present: Assessing the Societal Implications of Emerging Technologies

    Science.gov (United States)

    Michelson, Evan S.

    A growing challenge for the American policymaking system is to respond effectively to a wide range of interconnected, complex, long-term science and technology issues. Simultaneously, current approaches and institutions of governance are ill suited to address these multidimensional challenges. As the next generation of innovations in science and technology is arriving at an accelerating rate, the governance system is lagging behind. This realization leads to a vital overarching consideration that steers this study: What approaches are well suited to anticipate the longer-term societal implications of emerging technologies in the 21st Century? This study identifies and examines strategies for anticipating the longer-term societal implications of emerging technologies by way of a qualitative case study. It explores one area of technology (nanotechnology), in one particular governance system (the United States), and with a focus on one high profile non-governmental organization (NGO) involved in addressing a range of nanotechnology's societal and policy implications: the Project on Emerging Nanotechnologies (PEN). Based at the Woodrow Wilson International Center for Scholars, PEN's goal was to ensure "that as nanotechnologies advance, possible risks are minimized, public and consumer engagement remains strong, and the potential benefits of these new technologies are realized." The conceptual framework of anticipatory governance guides the research, which offers a real-world example about how anticipatory governance applies in the nongovernmental sector and shows how this idea links to broader theoretical debates about the policymaking process. The study's main conclusion is that PEN utilized a set of interconnected strategies related to advancing foresight, operating in a boundary-spanning role, and promoting communications and public engagement in its attempt to influence, anticipate, and shape the societal implications of emerging technologies. The findings are

  1. Challenges and Opportunities for Collaborative Technologies for Home Care Work

    DEFF Research Database (Denmark)

    Christensen, Lars Rune; Grönvall, Erik

    2011-01-01

    This article offers an exploration of home care work and the design of computational devices in support of such work. We present findings from a field study and four participatory design workshops. Themes emerging from the findings suggest that home care work may be highly cooperative in nature...... and requires substantial articulation work among the actors, such as family members and care workers engaged in providing care for older adults. Although they provide home care for older adults in cooperation, family members and care workers harbour diverging attitudes and values towards their joint efforts....... The themes emerging are used to elicit a number of design implications and to promote some illustrative design concepts for new devices in support of cooperative home care work....

  2. Integration Science and Technology of Silicon-Based Ceramics and Composites:Technical Challenges and Opportunities

    Science.gov (United States)

    Singh, M.

    2013-01-01

    Ceramic integration technologies enable hierarchical design and manufacturing of intricate ceramic and composite parts starting with geometrically simpler units that are subsequently joined to themselves and/or to metals to create components with progressively higher levels of complexity and functionality. However, for the development of robust and reliable integrated systems with optimum performance for high temperature applications, detailed understanding of various thermochemical and thermomechanical factors is critical. Different technical approaches are required for the integration of ceramic to ceramic and ceramic to metal systems. Active metal brazing, in particular, is a simple and cost-effective method to integrate ceramic to metallic components. Active braze alloys usually contain a reactive filler metal (e.g., Ti, Cr, V, Hf etc) that promotes wettability and spreading by inducing chemical reactions with the ceramics and composites. In this presentation, various examples of brazing of silicon nitride to themselves and to metallic systems are presented. Other examples of joining of ceramic composites (C/SiC and SiC/SiC) using ceramic interlayers and the resulting microstructures are also presented. Thermomechanical characterization of joints is presented for both types of systems. In addition, various challenges and opportunities in design, fabrication, and testing of integrated similar (ceramic-ceramic) and dissimilar (ceramic-metal) material systems will be discussed. Potential opportunities and need for the development of innovative design philosophies, approaches, and integrated system testing under simulated application conditions will also be presented.

  3. Clean Energy Finance: Challenges and Opportunities of Early-Stage Energy Investing (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Heap, D.; Pless, J.; Aieta, N.

    2013-12-01

    Characterized by a changing landscape and new opportunities, today's increasingly complex energy decision space will need innovative financing and investment models to appropriately assess risk and profitability. This report provides an overview of the current state of clean energy finance across the entire spectrum but with a focus on early stage investing, and it includes insights from investors across all investment classes. Further, this report aims to provide a roadmap with the mechanisms, limitations, and considerations involved in making successful investments by identifying risks, challenges, and opportunities in the clean energy sector.

  4. Generation IV concepts - Presentation at ACRS workshop 'Regulatory challenges for future nuclear power plants'

    International Nuclear Information System (INIS)

    Versluis, Rob M.

    2001-01-01

    The concept of the Near-Term Deployment Working Group was to define a technical approach for Generation IV system with enough detail to allow evaluation against the goal, bur broad enough to allow for optional features and trade. The following concepts were taken into account: water coolant (water or heavy water), gas coolant, liquid metal coolants. Concepts were grouped according to concept sets of technology base share and design approach. Water coolant concepts were grouped as follows: PWR loop reactors, integral primary system PWRs, Integral BWRs, pressure tube reactors, high conversion cores, supercritical water reactors, advanced fuel cycle concepts. Gas coolant concepts were grouped as follows: pebble bed modular reactors; prismatic modular reactors, very high temperature reactors, fast spectrum reactors, others (fluidized bed, moving ignition zone concept). Liquid metal concepts were grouped in four major categories: Medium-to-large oxide-fueled systems; Medium-sized metal-fueled systems; Medium-sized Pb/Pb-Bi systems; Small-sized Pb/Pb-Bi systems. The three supporting technology areas were examined: Fuels (oxide, metal, nitride); Coolants (Na, Pb/Pb-Bi); Fuel Cycle (advanced aqueous, pyroprocess). Non-classical concepts were also grouped as follows: Eutectic metallic fuel; Molten salt fuel; Gas core reactor; Molten salt cooled/solid fuel; Organic cooled reactor; Solid conduction/heat pipe; Fission product direct energy conversion. The Technical working Groups are analyzing the candidate concepts for performance potential relative to the goals; and technology gaps

  5. On the cutting edge technology enabling the challenging missions to asteroids and comets, our primitive neighbors

    Science.gov (United States)

    Kawaguchi, J.

    2014-07-01

    The world's first sample-and-return mission from an object orbiting outside the sphere of influence of the Earth was successfully performed through Hayabusa in 2010, an engineering demonstration mission of JAXA. And it was followed by another technology demonstrator, Ikaros, the world's first solar-sail mission launched in 2010, the same year of the Hayabusa return. These two demonstrations represent the significance of the technology development that shall precede the real science missions that will follow. The space-exploration community focuses its attention on the use of asteroids and comets as one of the most immediate destinations. Humans will perform voyages to those objects sooner or later. And we will initiate a kind of research as scientific activity for those objects. The missions may include even sample-and-return missions to those bodies for assessing the chance of possible resource utilization in future. The first step for it is, needless to say, science. Combining the sample-and-return technology using the ultra-high-speed reentry for sample recovery with the new propulsion system using both electric and photon force will be the direct conclusion from Hayabusa and Ikaros. And key elements such as autonomy are also among the essential factors in making the sophisticated operation possible around asteroids and comets avoiding the communication difficulty. This presentation will comprehensively touch on what those technology skills are, and how they are applicable to the subsequent new missions, from the mission leader's point of view. They are probably real requisites for planning brand-new innovative challenges in the ACM community.

  6. The present state and future development of X-ray imaging technology

    International Nuclear Information System (INIS)

    Gou Liang; Wang Xuben; Cao Hui

    2002-01-01

    Medical imaging has long been the hot topic of clinical medical sciences, the X-ray imaging equipment is a popular device of current medical imaging, and the digital imaging technology has become a challenge to the conventional plane imaging. The author first discusses that the key of X-ray-based imaging is the generator and detector of X-ray and the improvement of imaging software, and then points out that the future development of medical imaging will aim at the capability of reducing radiation and handling more efficient and accurate data capacity

  7. The Impacts of Demographic Variables on Technological and Contextual Challenges of E-learning Implementation

    Science.gov (United States)

    Aldowah, Hanan; Ghazal, Samar; Naufal Umar, Irfan; Muniandy, Balakrishnan

    2017-09-01

    Information technology has achieved robust growth which has made it possible for learning to occur quickly. The rapid development of information, communication and technologies (ICT) has initiated an unparalleled transformation in universities all over the world. This development of technology and learning is offering new techniques to represent knowledge, new practices, and new global communities of learners. As a result, today’s economic and social changes force universities to try to find new learning approaches and systems. E-learning seems to be an appropriate approach in this aspect. However, the implementation of e-learning systems in universities is not an easy task because of some challenges related to context, technology, and other challenges. This paper studied the impacts of demographic data and reported the critical points for the decision makers to consider when planning and implementing e-learning in universities. A quantitative approach was used to study the effects of technological and contextual challenges on e-learning implementation in which a questionnaire was used for the data collection. According to the findings of the study, the most important challenges of the implementation of e-learning are related either to organizational (Contextual) and technological (technical) issues. The demographic variables have been found to play a direct and indirect role with the technological and contextual challenges of implementing e-learning. This paper showed that there are some significant differences in the two challenges faced by instructors in terms of the demographic variables. The result revealed that some significant differences exist between demographic variables and the two challenges of e-learning in terms of gender, age, teaching experience, ICT experience and e-learning experience. However, there is no significant difference in terms of e-learning experience. The obtained data, from such study, can provide information about what academic

  8. NASA Green Flight Challenge: Conceptual Design Approaches and Technologies to Enable 200 Passenger Miles per Gallon

    Science.gov (United States)

    Wells, Douglas P.

    2011-01-01

    The Green Flight Challenge is one of the National Aeronautics and Space Administration s Centennial Challenges designed to push technology and make passenger aircraft more efficient. Airliners currently average around 50 passenger-miles per gallon and this competition will push teams to greater than 200 passenger-miles per gallon. The aircraft must also fly at least 100 miles per hour for 200 miles. The total prize money for this competition is $1.65 Million. The Green Flight Challenge will be run by the Comparative Aircraft Flight Efficiency (CAFE) Foundation September 25 October 1, 2011 at Charles M. Schulz Sonoma County Airport in California. Thirteen custom aircraft were developed with electric, bio-diesel, and other bio-fuel engines. The aircraft are using various technologies to improve aerodynamic, propulsion, and structural efficiency. This paper will explore the feasibility of the rule set, competitor vehicles, design approaches, and technologies used.

  9. High Risk Aortic Valve Replacement - The Challenges of Multiple Treatment Strategies with an Evolving Technology.

    Science.gov (United States)

    Booth, K; Beattie, R; McBride, M; Manoharan, G; Spence, M; Jones, J M

    2016-01-01

    Deciding on the optimal treatment strategy for high risk aortic valve replacement is challenging. Transcatheter Aortic Valve implantation (TAVI) has been available in our centre as an alternative treatment modality for patients since 2008. We present our early experience of TAVI and SAVR (surgical Aortic Valve Replacement) in high risk patients who required SAVR because TAVI could not be performed. The database for Surgical aortic valve and Transcatheter aortic valve replacement referrals was interrogated to identify relevant patients. Survival to hospital discharge was 95.5% in the forty five patients who had SAVR when TAVI was deemed technically unsuitable. One year survival was 86%. Defining who is appropriate for TAVI or high risk SAVR is challenging and multidisciplinary team discussion has never been more prudent in this field of evolving technology with ever decreasing risks of surgery. The introduction of TAVI at our institution has seen a rise in our surgical caseload by approximately by 25%. Overall, the option of aortic valve intervention is being offered to more patients in general which is a substantial benefit in the treatment of aortic valve disease.

  10. Present and Future Challenges in Trace and Ultra-Trace Analysis

    International Nuclear Information System (INIS)

    Toulhoat, P.

    2005-01-01

    The analysis of trace and ultra-trace elements is continuously stimulating the progress in analytical chemistry. Environmental chemistry, radiochemistry, biology, health, agri-food are prescribers of trace analyses, with continuously increasing exigencies: lowering detection limits, lowering costs and analysis time, improving the quality of analytical information. Precise data about the chemical identity and chemical environment of analytes are now requested. Such pieces of information, beyond simple numerical data and confidence intervals, are necessary to understand studied systems, and to predict their evolution. From environmental contamination cases, one can envisage the various aspects of a problem, with for each of them its own exigencies and specificities in terms of analytical methods and approaches. The detection of traces and ultra-traces of actinides and fission products has been recently revisited and stimulates new technological developments (non proliferation issues, waste management). Data on their speciation in geological and biological media are essential for evaluating the safety of nuclear waste repositories. Various techniques are now used to determine speciation in liquid samples or on surfaces, with tremendous spatial resolutions or sensitivities. A new revolution in analytical chemistry is expected with the development of micro- or nano-analytical technologies. (author)

  11. Human Subjects Protection and Technology in Prevention Science: Selected Opportunities and Challenges

    OpenAIRE

    Pisani, Anthony R.; Wyman, Peter A.; Mohr, David C.; Perrino, Tatiana; Gallo, Carlos; Villamar, Juan; Kendziora, Kimberly; Howe, George W.; Sloboda, Zili; Brown, C. Hendricks

    2016-01-01

    Internet-connected devices are changing the way people live, work, and relate to one another. For prevention scientists, technological advances create opportunities to promote the welfare of human subjects and society. The challenge is to obtain the benefits while minimizing risks. In this article, we use the guiding principles for ethical human subjects research and proposed changes to the Common Rule regulations, as a basis for discussing selected opportunities and challenges that new techn...

  12. Innovation Strategies and Challenges in Emerging Economies: The Case of Research and Technology Organizations in Turkey

    OpenAIRE

    F. Demir

    2017-01-01

    Innovation is highly critical for every company, especially for technology-based organizations looking to sustain their competitive advantage. However, this is not an easy task. Regardless of the size of the enterprise, market and location, all organizations face numerous challenges. Even though huge barriers to innovation exist in different countries, firm- and industry-specific challenges can be distinguished. This paper examines innovation strategies and obstacles to innovation in research...

  13. The influence of future-oriented technology analysis: addressing the Cassandra challenge

    OpenAIRE

    JOHNSTON Ron; CAGNIN Cristiano

    2011-01-01

    This paper is based on a series of interviews with nine leading researchers conducted during the Future-Oriented Technology Analysis International Conference held in Seville on 16–17 October 2008. Analysis of these interviews paints a picture of FTA as an increasingly important approach being adopted in many countries to address the many challenges which are emerging at this time in human history. From this are drawn implications for the community of FTA practitioners. The biggest challenge i...

  14. Technology and Occupation: Past, Present, and the Next 100 Years of Theory and Practice.

    Science.gov (United States)

    Smith, Roger O

    During the first 100 years of occupational therapy, the profession developed a remarkable practice and theory base. All along, technology was an active and core component of practice, but often technology was mentioned only as an adjunct component of therapy and as if it was a specialty. This lecture proposes a new foundational theory that places technology at the heart of occupational therapy as a fundamental part of human occupation and the human experience. Moreover, this new Metaphysical Physical-Emotive Theory of Occupation pushes the occupational therapy profession and the occupational science discipline to overtly consider occupation on the level of a metaphysical-level reality. The presentation of this theory at the Centennial of the profession charges the field to test and further define the theory over the next 100 years and to leverage technology and its role in optimizing occupational performance into the future. Copyright © 2017 by the American Occupational Therapy Association, Inc.

  15. Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

    Science.gov (United States)

    Alam, Muhammad Mahtab; Ben Hamida, Elyes

    2014-05-23

    In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

  16. A new approach to environmental education: environment-challenge for science, technology and society

    International Nuclear Information System (INIS)

    Popovic, D.

    2002-01-01

    The paper presents a new approach to environmental education within the project Environment: Challenge for Science, Technology and Education, realized on the Alternative Academic Education Network (AAEN) in Belgrade. The project is designed for graduate or advanced undergraduate students of science, medicine, engineering, biotechnology, political and law sciences. It is multidisciplinary and interdisciplinary project aimed to support students interest in different areas of the environmental sciences through strong inter-connection between modern scientific ideas, technological achievements and society. The project contains four basic courses (Living in the Environment; Physical and Chemical Processes in the Environment; Industrial Ecology and Sustainable Development; Environmental Philosophy and Ethics) and a number of elective courses dealing with environmental biology, adaptation processes , global eco politics, environmental ethics, scientific and public policy, environmental consequences of warfare, environmental pollution control, energy management, environmental impact assessment, etc. The standard ex catedra teaching is replaced with active student-teacher communication method enabling students to participate actively in the subject through seminars, workshops, short essays and individual research projects

  17. An Overview of the Past, Present, and Future of 3D Printing Technology with an Emphasis on the Present

    Science.gov (United States)

    Snyder, Robin M.

    2014-01-01

    Just as the cost of high quality laser printing started in the tens of thousands of dollar and can now be purchased for under $100, so too has 3D printing technology started in the tens of thousands of dollars and is now in the thousand dollar range. Current 3D printing technology takes 2D printing into a third dimension. Many 3D printers are…

  18. Present challenges and future opportunities for Dacia cars on the Romanian automobile market

    OpenAIRE

    Cruceru, Gheorghe; Micuda, Dan

    2011-01-01

    Dacia car models are becoming well known and appreciated not only on the Romanian market but also on European markets. The present paper presents a current survey of Dacia cars sales on the domestic market, both in terms of territorial and structural elements, in order to identify the company strong points. A territorial level analysis was conducted in order to identify market areas suitable for further development along with a Dacia models analysis, the final objective being to highlight the...

  19. Mapuche nation: Concept, history and challenges present in Gulumapu-Araucanía

    Directory of Open Access Journals (Sweden)

    Samuel San Juan Rebolledo

    2017-07-01

    Full Text Available This article deals with the problems of the Mapuche nation; as a concept, as a historical view in contrast to the Chilean political nation and the current challenges of the Mapuche movement. This analysis will be performed in three stages, in the first, we will look at the importance of conceptual history as a historiographic method forgaining more precise access to the conceptual categories that relate to historical time, assessing their scope and significance. Secondly, we will carry out a thorough investigation of the literature to find out what are the different meanings of the concept of ‘nation’, the various existing trends of interpretation and the theoretical contributions in order to approach the problems of the Mapuche nation, in this space of the Andes, Gulumapu-Araucanía. Finally, we will review some of the view points of Mapuche intellectuals who address the problems of the Mapuche nation, including readings on ethnicity and colonialism, in order to quantify their theoretical contribution to the mapuche movement.

  20. Trauma patients who present in a delayed fashion: a unique and challenging population.

    Science.gov (United States)

    Kao, Mary J; Nunez, Hector; Monaghan, Sean F; Heffernan, Daithi S; Adams, Charles A; Lueckel, Stephanie N; Stephen, Andrew H

    2017-02-01

    A proportion of trauma patients present for evaluation in a delayed fashion after injury, likely due to a variety of medical and nonmedical reasons. There has been little investigation into the characteristics and outcomes of trauma patients who present delayed. We hypothesize that trauma patients who present in a delayed fashion are a unique population at risk of increased trauma-related complications. This was a retrospective review from 2010-2015 at a Level I trauma center. Patients were termed delayed if they presented >24 hours after injury. Patients admitted within 24 hours of their injury were the comparison group. Charts were reviewed for demographics, mechanism, comorbidities, complications and outcomes. A subgroup analysis was done on patients who suffered falls. During the 5-y period, 11,705 patients were admitted. A total of 588 patients (5%) presented >24 h after their injury. Patients in the delayed group were older (65 versus 55 y, P fashion have unique characteristics and are more likely to suffer negative outcomes including substance withdrawal. Future goals will include exploring strategies for early intervention, such as automatic withdrawal monitoring and social work referral for all patients who present in a delayed fashion. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Sensor Web Technology Challenges and Advancements for the Earth Science Decadal Survey Era

    Science.gov (United States)

    Norton, Charles D.; Moe, Karen

    2011-01-01

    This paper examines the Earth science decadal survey era and the role ESTO developed sensor web technologies can contribute to the scientific observations. This includes hardware and software technology advances for in-situ and in-space measurements. Also discussed are emerging areas of importance such as the potential of small satellites for sensor web based observations as well as advances in data fusion critical to the science and societal benefits of future missions, and the challenges ahead.

  2. Teacher Education, Information and Communication Technology: Prospects and Challenges of E-Teaching Profession in Nigeria

    OpenAIRE

    Thomas Olabode Owolabi; Babatope Kolade Oyewole; Jonathan O. Oke

    2013-01-01

    Teachers are indispensable within the teaching – learning process. Hence, they constitute a major input in the accomplishment of educational goals and objectives in all nations. In Nigeria, teacher education has been bedeviled with a lot of challenges in the modern day technology of imparting knowledge in the teaching and learning process. Information and Communication Technology (ICT) is relatively a very new development in Nigerian educational system. ICT plays a significant role in teache...

  3. Churg-Strauss syndrome presenting with eosinophilic myocarditis: a diagnostic challenge.

    Science.gov (United States)

    Correia, Ana Sofia; Gonçalves, Alexandra; Araújo, Vítor; Almeida e Silva, João; Pereira, José Manuel; Rodrigues Pereira, Pedro; Pizarro, Manuel; Silva, João Carlos; Maciel, Maria Júlia

    2013-09-01

    Churg-Strauss syndrome (CSS) is an unusual disease that presents as systemic vasculitis and peripheral eosinophilia in patients with an atopic constitution. Cardiac involvement is unusual and often not prominent on initial presentation, but is an important cause of morbidity and mortality in patients with CSS. We report the case of a young woman with severe acute myocarditis. Coronary arteriography demonstrated extensive focal vasculopathy, consistent with coronary vasculitis, and myocardial biopsy showed eosinophilic myocarditis. This presentation led to an initial diagnosis of CSS in this patient and appropriate therapy resulted in a spectacular remission of disease activity. Copyright © 2012 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

  4. The uranium industry in the former eastern block countries-present status and new challenges associated with remediation work

    International Nuclear Information System (INIS)

    Vels, B.Dr.; Ruhrmann, G.Dr.

    1994-01-01

    The main uranium producing countries and the individual production centres are briefly described, including their production status. In particular, an analysis of their present situation is given. The challenge of required remediation work lies in the successful handling of the complex transformation from the old to the new socio-economic environment within a tight financial framework

  5. Chlorpyrifos-Induced Delayed Neurotoxicity with A Rare Presentation of Flaccid Quadriplegia: A Diagnostic Challenge

    Directory of Open Access Journals (Sweden)

    Patrícia Afonso Mendes

    2017-10-01

    Full Text Available Chlorpyrifos is an organophosphate compound recognized as causing acute toxicity. However, organophosphate-induced delayed polyneuropathy (OPIDP, although rare, has also been described. We describe an unusual presentation of OPIDP with flaccid quadriplegia progressing to a locked-in-like syndrome, 30 days after a 60-year-old man voluntarily ingested chlorpyrifos. In the absence of specific treatment, the patient only recovered partial motor responses and the ability to communicate. The authors present this report in order to highlight a form of OPIDP which can hinder diagnosis due to its atypia and the delay in the onset of symptoms from initial contact with the toxicant.

  6. Present status of the development of mycoherbicides against water hyacinth: successes and challenges. A review

    Directory of Open Access Journals (Sweden)

    Jijakli, MH.

    2012-01-01

    Full Text Available Recent trends in the implementation of bioherbicide use in the control of water hyacinth (Eichhornia crassipes [Martius] Solms Laubach have depended primarily on several strategies. The use of bioherbicides has been stimulated as part of the search for alternatives to chemical control, as the use of these more environmentally-friendly formulations minimizes hazards resulting from herbicide residue to both human and animal health, and to the ecology. In addition, one of the major strategies in the concept of biological control is the attempt to incorporate biological weed control methods as a component of integrated weed management, in order to achieve satisfactory results while reducing herbicide application to a minimum. Several fungal pathogens with mycoherbicide potential (Sclerotinia sclerotiorum in Hyakillä and Cercospora rodmanii, named ABG-5003 have been discovered on diseased water hyacinth plants, but none has become commercially available in the market. Biological, technological, and commercial constraints have hindered progress in this area. Many of these constraints are being addressed, but there is a critical need to better understand the biochemical and physiological data regarding the pathogenesis of these new bioherbicides. Oil emulsions are recognized as a way to increase both efficiency of application and efficacy of biocontrol agents.

  7. Self-Presentation Bias in Surveys of Teachers' Educational Technology Practices

    Science.gov (United States)

    Kopcha, Theodore J.; Sullivan, Howard

    2007-01-01

    This study investigated self-presentation bias in the self-reports of teachers about their practices in six topic areas in educational technology (Instructional Design, Assessment, Learner-Centered Instruction, Curriculum Alignment, Attitudes about Computers, and Use of Computers with Students). Subjects were 50 middle-school teachers. Data were…

  8. Present situation of unused uranium fuel in Tokyo Institute of Technology

    International Nuclear Information System (INIS)

    Obara, T.; Ogawa, M.

    2008-01-01

    Present situation of unused enriched uranium fuel in Tokyo Institute of Technology is described. The fuels were for sub-critical experiments. There is no special facility for transportation in the site. But there is no technical problem for it. One of the important issues to be done is a duty by national regulation against nuclear disaster. (author)

  9. Radiotherapy of brain metastases of a breast cancer: present strategies, technological innovations and biological perspectives

    International Nuclear Information System (INIS)

    Chargari, C.; Vedrine, L.; Bauduceau, O.; Jacob, J.; Fayolle, M.; Chargari, C.; Campana, F.; Pierga, J.Y.; Idrissi, H.R.; Fourquet, A.; Kirova, Y.

    2010-01-01

    The authors propose an overview of strategies which are presently used for the treatment of brain metastases related to a breast cancer. They outline the perspectives and recent developments of encephalic irradiation with new technologies allowing an increased conformation to be obtained, and also in terms of radiosensitization and radioprotection experiences. Short communication

  10. Challenges in the Evaluation for Possible Abuse: Presentations of Congenital Bleeding Disorders in Childhood

    Science.gov (United States)

    Jackson, Jami; Carpenter, Shannon; Anderst, Jim

    2012-01-01

    Objectives: To describe children with congenital bleeding disorders that present in a manner that may be concerning for non-accidental trauma (NAT), and to evaluate associations with disease and demographic characteristics. Methods: Ten year retrospective charts of subjects were reviewed at a Hemophilia Treatment Center. Demographic, historical,…

  11. Overview of the present status and challenges of neutrino oscillation physics

    Energy Technology Data Exchange (ETDEWEB)

    Mocioiu, Irina [Pennsylvania State University, 104 Davey Lab, University Park, PA 16802 (United States)

    2012-11-20

    This is an overview of the current status of neutrino oscillation physics, including atmospheric, solar, reactor and accelerator neutrino experiments. After summarizing our present understanding of all data, I discuss the open questions and how they might be addressed in the future. I also discuss how neutrinos can be used to learn about new physics and astrophysics.

  12. Rapid forest change in the interior west presents analysis opportunities and challenges

    Science.gov (United States)

    John D. Shaw

    2007-01-01

    A recent drought has caused compositional and structural changes in Interior West forests. Recent periodic and annual inventory data provide an opportunity to analyze forest changes on a grand scale. This "natural experiment" also provides opportunities to test the effectiveness of Forest Inventory and Analysis (FIA) methodologies. It also presents some...

  13. Emerging pollutants in the environment: present and future challenges in biomonitoring, ecological risks and bioremediation.

    Science.gov (United States)

    Gavrilescu, Maria; Demnerová, Kateřina; Aamand, Jens; Agathos, Spiros; Fava, Fabio

    2015-01-25

    Emerging pollutants reach the environment from various anthropogenic sources and are distributed throughout environmental matrices. Although great advances have been made in the detection and analysis of trace pollutants during recent decades, due to the continued development and refinement of specific techniques, a wide array of undetected contaminants of emerging environmental concern need to be identified and quantified in various environmental components and biological tissues. These pollutants may be mobile and persistent in air, water, soil, sediments and ecological receptors even at low concentrations. Robust data on their fate and behaviour in the environment, as well as on threats to ecological and human health, are still lacking. Moreover, the ecotoxicological significance of some emerging micropollutants remains largely unknown, because satisfactory data to determine their risk often do not exist. This paper discusses the fate, behaviour, (bio)monitoring, environmental and health risks associated with emerging chemical (pharmaceuticals, endocrine disruptors, hormones, toxins, among others) and biological (bacteria, viruses) micropollutants in soils, sediments, groundwater, industrial and municipal wastewaters, aquaculture effluents, and freshwater and marine ecosystems, and highlights new horizons for their (bio)removal. Our study aims to demonstrate the imperative need to boost research and innovation for new and cost-effective treatment technologies, in line with the uptake, mode of action and consequences of each emerging contaminant. We also address the topic of innovative tools for the evaluation of the effects of toxicity on human health and for the prediction of microbial availability and degradation in the environment. Additionally, we consider the development of (bio)sensors to perform environmental monitoring in real-time mode. This needs to address multiple species, along with a more effective exploitation of specialised microbes or enzymes

  14. Proceedings of the 2011 hydrocarbon annual days - Innovation, technological and human challenges

    International Nuclear Information System (INIS)

    2011-01-01

    This document gathers the available presentations (slides) given at the 2011 issue of the annual hydrocarbon days. The conference comprises 14 workshops and 5 plenary sessions dealing with: - Plenary 1 - oil and gas and the evolution of the world energy landscape: The new geopolitical energy landscape (Lesourne, J.); Macondo and Fukushima: what challenges for the industry and for Total? (Mosconi, J.J.); Natural gas: energy of the 21. century? (Bensasson, B.); - Workshop 1 - innovation in modeling, computer science and calculations: Tools at the engineering service - 3D visualisation mock-ups (Hoffert, J.L.; Bouget, F.); Basins modelling (Facon, J.); 'OCEAN' computer platform and calculation modules development (Dury, V.); - Workshop 2 - source rock hydrocarbons: Exploration-production (B. Courme); Aquifers monitoring technology (Lallier, S.); Hydraulic fracturing of schists (Faucompret, N.); - Workshop 3 - research, universities and industries, the innovating process: presentation of ANCRE actions - situation of research (Goffe, B.); Artificial photosynthesis - using solar energy for hydrogen and fuels production (Artero, V.); Partnership and competitiveness (Valadier, L.); - workshop 4 - marine innovations, new ships: new building ships for ultra-deep offshore and big pipelines (Ardavanis, K.); The Seven Borealis, a World-Class Strategic Enabler (Bost, F.); Application of innovation utilizing the Skandi Arctic through the use of the Pipeline Repair System (PRS) and the Personal Diving Equipment (PDE) (Grosjean, P.); - Workshop 5 - innovative Subsea equipments: Subsea: Way to Future - Fully Autonomous Plant (Riviere, L.); The 2. Generation DC All-Electric Subsea Production Control System (Van der Akker, J.); The power distribution module: an essential component in the submarine production chain (Eschbach, J.L.); Reeled installation of EHTF - Electrically Heat Traced Pipe-in-Pipe (Mair, J.); - Workshop 6 - seismic imaging: Towed streamer seismic strategies for sub

  15. Today's and future challenges in applications of renewable energy technologies for desalination

    KAUST Repository

    Goosen, Mattheus F A

    2013-08-28

    Recent trends and challenges in applications of renewable energy technologies for water desalination are critically reviewed with an emphasis on environmental concerns and sustainable development. After providing an overview of wind, wave, geothermal, and solar renewable energy technologies for fresh water production, hybrid systems are assessed. Then scale-up and economic factors are considered. This is followed with a section on regulatory factors, environmental concerns, and globalization, and a final segment on selecting the most suitable renewable energy technology for conventional and emerging desalination processes. © 2014 Copyright Taylor & Francis Group, LLC.

  16. Today's and future challenges in applications of renewable energy technologies for desalination

    KAUST Repository

    Goosen, Mattheus F A; Mahmoudi, Hacè ne; Ghaffour, NorEddine

    2013-01-01

    Recent trends and challenges in applications of renewable energy technologies for water desalination are critically reviewed with an emphasis on environmental concerns and sustainable development. After providing an overview of wind, wave, geothermal, and solar renewable energy technologies for fresh water production, hybrid systems are assessed. Then scale-up and economic factors are considered. This is followed with a section on regulatory factors, environmental concerns, and globalization, and a final segment on selecting the most suitable renewable energy technology for conventional and emerging desalination processes. © 2014 Copyright Taylor & Francis Group, LLC.

  17. Evaluation of Recommender Systems for Technology-Enhanced Learning: Challenges and Possible Solutions

    NARCIS (Netherlands)

    Sandy, Heleau; Drachsler, Hendrik; Gillet, Dennis

    2009-01-01

    Heleou, S., Drachsler, H., & Gillet, D. (2009). Evaluation of Recommender Systems for Technology-Enhanced Learning: Challenges and Possible Solutions. 1st workshop on Context-aware Recommender Systems for Learning at the Alpine Rendez-Vous. November, 30-December, 3, 2009, Garmisch-Patenkirchen,

  18. Taking care of the symbolic order. How converging technologies challenge our concepts

    NARCIS (Netherlands)

    Swierstra, Tsjalling; van Est, Rinie; Boenink, Marianne

    2009-01-01

    In this article we briefly summarize how converging technologies challenge elements of the existing symbolic order, as shown in the contributions to this special issue. We then identify the vision of ‘life as a do it yourself kit’ as a common denominator in the various forms of convergence and

  19. Assuring Quality in Promoting Generic Skills in the Higher College of Technology (HCT), Muscat: Challenges & Realities

    Science.gov (United States)

    Ali, Holi Ibrahim Holi

    2012-01-01

    This paper explores EFL teachers' perceptions in relation to the pedagogical and conceptual challenges that they face in promoting generic skills in the Higher College of Technology (HCT), Muscat, in the context of post foundation level provision. A questionnaire was administered to 17 EFL teachers at HCT, at post foundation levels to investigate…

  20. Identifying the Ethical Challenges Encountered by Information Technology Professionals Working within the Nevada Casino Industry

    Science.gov (United States)

    Essig, Michael R.

    2014-01-01

    A thematic analysis qualitative study was used to identify the unethical challenges encountered by Information Technology (IT) professionals working within the Nevada casino industry. Fourteen current and former IT leaders working or who worked in the Nevada casino industry were interviewed. Using thematic analysis, nine themes regarding ethical…

  1. Challenges of Adopting the Use of Technology in Less Developed Countries: The Case of Cambodia

    Science.gov (United States)

    Richardson, Jayson W.

    2011-01-01

    Drawing on Everett Rogers's theory of the diffusion of innovations, this article identifies the barriers, challenges, and successes in the adoption of technology training by teacher trainers in Cambodia. The analysis was based on data collected from an open-ended survey, face-to-face interviews, and document analysis. Findings reveal that the…

  2. Technology challenges for SRF guns as ERL sources in view of Rossendorf work

    International Nuclear Information System (INIS)

    Janssen, Dietmar; Buettig, Hartmut; Evtushenko, Pavel; Lehnert, Ulf; Michel, Peter; Moeller, Karsten; Murcek, Petr; Schneider, Christof; Schurig, Rico; Staufenbiel, Friedrich; Teichert, Jochen; Xiang, Rong; Stephan, Juergen; Lehmann, Wolf-Dietrich; Kamps, Thorsten; Lipka, Dirk; Volkov, Vladimir; Will, Ingo

    2006-01-01

    After successful tests of a SRF gun with a superconducting half-cell cavity a new SRF photoinjector for cw operation at the ELBE linac is under development. The paper discuss the design of the injector, the technological challenges of different components, the status of manufacturing and the expected parameters

  3. Challenges in Implementing Emission Mitigation Technologies in Indonesia Agricultural Sector: Criticizing the Available Mitigation Technologies

    Directory of Open Access Journals (Sweden)

    Malahayati Marissa

    2018-03-01

    Full Text Available Reduction of Green House Gas (GHG emissions in the agricultural sector is the main target for reducing non-CO2 emissions. In Indonesia, the agricultural sector is the third largest GHG emitter, far behind that from Land Use Change and Forestry (LUCF and the energy sector. However, the agricultural sector is the biggest contributor of non-CO2 emissions and is also the most vulnerable sector to climate change. The Indonesian government is committed to reduce total emission inform current levels by 29% by 2030 under Nationally Determined Contribution (NDC. This will require reductions in emissions from all sectors including agriculture. Several mitigation technologies have been recommended by UNFCCC for implementation such as replacing urea with ammonium sulfate fertilizer; replacing nitrogen fertilizer with multicontent fertilizer; water irrigation management; replacing roughage with concentrate as livestock feed; and building biogas digesters. From our Computer General Equilibrium (CGE simulation, if the focus of mitigation technology implementation in agriculture is to reduce non-CO2 emissions gases such as CH4 and N2O, then a comprehensive approach is needed. If the government implements the technology partially, we predict there will be a trade-off between CH4 and N2O emission. However, our simulation shows the loss to GDP caused by a new emission mitigation policy is very high even though Indonesia has invested for mitigation technology in agriculture. This is because we consider the additional investment needed will be costly and some technologies may not be suitable for implementation in Indonesia. In this research, we review current literature and examine each technology and its cost and compatibility with Indonesian situations in order to make policy recommendations for implementation by the Indonesia government.

  4. Key technologies for the current and future challenges of the nuclear industry

    International Nuclear Information System (INIS)

    Martinez-Sancho, Lou; Roulleaux Dugage, Martin

    2017-01-01

    The current challenges of the nuclear industry are the result of too many uncertainties: low GDP growth of OECD countries, booming state debts, deregulated electricity markets, growing safety regulation and diminishing public support. As a result, nuclear technology companies tend to entrench in their current installed base, while attempting to develop global partnerships to market their products to new nuclear countries, along with viable financing schemes. But new opportunities are lying ahead. In a future context of effective and global climate policies, nuclear energy will have to play a key role in a new energy ecosystem aside the two other clean air energy production technologies: renewable energies and electricity storage. And still, the perspective of long-term sustainability of nuclear energy is still high. This paper explores the opportunity for key innovative technologies to shift the way we think about nuclear in the future energy system while addressing these major challenges. (author)

  5. Ever-present threats from information technology: the Cyber-Paranoia and Fear Scale

    Directory of Open Access Journals (Sweden)

    Oliver John Mason

    2014-11-01

    Full Text Available Delusions involving technology, and specifically the internet, are increasingly common, and fear-reality statistics suggest computer-related fears are very widespread. These fears form a continuum from the widely understandable and realistic to the unrealistic, and frankly paranoid. The present study investigated the validity of this construct in a non-clinical population by constructing a novel self-report measure. The new Cyber-Paranoia and Fear Scale aims to measure the perception of information technology-related threats originating from or enabled by computers, smartphones, social networks and digital surveillance. Psychometric properties of the new Cyber-Paranoia and Fear Scale are reported alongside an established measure of suspiciousness and paranoia in 181 participants including a sub-group of fifty information technology professionals. Exploratory factor analysis suggested the presence of two, related, dimensions that we term Cyber-Fear and Cyber-Paranoia. Both sub-scales were internally consistent and produced a normal distribution of scores. The relationships of the sub-scales with age, gender, trait paranoia, digital literacy and digital inclusion are supportive of construct validity. The distinctiveness of ‘cyber-paranoia’ from general trait paranoia appears to mirror the clinical distinctiveness of ‘internet’ and other technology fuelled delusions. Knowledge provision to increase technological proficiency and awareness may bring about a reduction in cyber-paranoia.

  6. Ever-present threats from information technology: the Cyber-Paranoia and Fear Scale.

    Science.gov (United States)

    Mason, Oliver J; Stevenson, Caroline; Freedman, Fleur

    2014-01-01

    Delusions involving technology, and specifically the internet, are increasingly common, and fear-reality statistics suggest computer-related fears are very widespread. These fears form a continuum from the widely understandable and realistic to the unrealistic, and frankly paranoid. The present study investigated the validity of this construct in a non-clinical population by constructing a novel self-report measure. The new Cyber-Paranoia and Fear Scale aims to measure the perception of information technology-related threats originating from or enabled by computers, smartphones, social networks, and digital surveillance. Psychometric properties of the new Cyber-Paranoia and Fear Scale are reported alongside an established measure of suspiciousness and paranoia in 181 participants including a sub-group of fifty information technology professionals. Exploratory factor analysis suggested the presence of two, related, dimensions that we term cyber-paranoia and cyber-fear. Both sub-scales were internally consistent and produced a normal distribution of scores. The relationships of the sub-scales with age, gender, trait paranoia, digital literacy, and digital inclusion are supportive of construct validity. The distinctiveness of 'cyber-paranoia' from general trait paranoia appears to mirror the clinical distinctiveness of 'internet' and other technology-fuelled delusions. Knowledge provision to increase technological proficiency and awareness may bring about a reduction in cyber-paranoia.

  7. Present Status and Future Growth of Advanced Maintenance Technology and Strategy in US Manufacturing.

    Science.gov (United States)

    Jin, Xiaoning; Weiss, Brian A; Siegel, David; Lee, Jay

    2016-01-01

    The goals of this paper are to 1) examine the current practices of diagnostics, prognostics, and maintenance employed by United States (U.S.) manufacturers to achieve productivity and quality targets and 2) to understand the present level of maintenance technologies and strategies that are being incorporated into these practices. A study is performed to contrast the impact of various industry-specific factors on the effectiveness and profitability of the implementation of prognostics and health management technologies, and maintenance strategies using both surveys and case studies on a sample of U.S. manufacturing firms ranging from small to mid-sized enterprises (SMEs) to large-sized manufacturing enterprises in various industries. The results obtained provide important insights on the different impacts of specific factors on the successful adoption of these technologies between SMEs and large manufacturing enterprises. The varying degrees of success with respect to current maintenance programs highlight the opportunity for larger manufacturers to improve maintenance practices and consider the use of advanced prognostics and health management (PHM) technology. This paper also provides the existing gaps, barriers, future trends, and roadmaps for manufacturing PHM technology and maintenance strategy.

  8. Challenges of video monitoring for phenomenological diagnostics in present and future tokamaks

    International Nuclear Information System (INIS)

    Martin, Vincent; Mondana, Victor; Travere, Jean-Marcel

    2011-01-01

    With the development of heterogeneous camera networks working at different wavelengths and frame rates and covering a large surface of vacuum vessel, the visual observation of a large variety of plasma and thermal phenomena (e.g., hot spots, ELMs, MARFE, arcs, dusts, etc.) becomes possible. In the domain of machine protection, a phenomenological diagnostic is a key-element towards plasma/thermal event dangerousness assessment during real time operation. It is also of primary importance to automate the extraction and the storage of phenomena information for further off-line event retrieval and analysis, thus leading to a better use of massive image data bases for plasma physics studies. To this end, efforts have been devoted to the development of image processing algorithms dedicated to the recognition of specific events. But a need arises now for the integration of techniques developed so far in both hardware and software directions. We present in this paper our latest results in the field of real time phenomena recognition and management through our image understanding software platform. T his platform has been validated on Tore Supra during operation and is under evaluation for the foreseen imaging diagnostic of ITER. (authors)

  9. Challenges in constraining anthropogenic aerosol effects on cloud radiative forcing using present-day spatiotemporal variability.

    Science.gov (United States)

    Ghan, Steven; Wang, Minghuai; Zhang, Shipeng; Ferrachat, Sylvaine; Gettelman, Andrew; Griesfeller, Jan; Kipling, Zak; Lohmann, Ulrike; Morrison, Hugh; Neubauer, David; Partridge, Daniel G; Stier, Philip; Takemura, Toshihiko; Wang, Hailong; Zhang, Kai

    2016-05-24

    A large number of processes are involved in the chain from emissions of aerosol precursor gases and primary particles to impacts on cloud radiative forcing. Those processes are manifest in a number of relationships that can be expressed as factors dlnX/dlnY driving aerosol effects on cloud radiative forcing. These factors include the relationships between cloud condensation nuclei (CCN) concentration and emissions, droplet number and CCN concentration, cloud fraction and droplet number, cloud optical depth and droplet number, and cloud radiative forcing and cloud optical depth. The relationship between cloud optical depth and droplet number can be further decomposed into the sum of two terms involving the relationship of droplet effective radius and cloud liquid water path with droplet number. These relationships can be constrained using observations of recent spatial and temporal variability of these quantities. However, we are most interested in the radiative forcing since the preindustrial era. Because few relevant measurements are available from that era, relationships from recent variability have been assumed to be applicable to the preindustrial to present-day change. Our analysis of Aerosol Comparisons between Observations and Models (AeroCom) model simulations suggests that estimates of relationships from recent variability are poor constraints on relationships from anthropogenic change for some terms, with even the sign of some relationships differing in many regions. Proxies connecting recent spatial/temporal variability to anthropogenic change, or sustained measurements in regions where emissions have changed, are needed to constrain estimates of anthropogenic aerosol impacts on cloud radiative forcing.

  10. Analysis and study of spent fuel reprocessing technology from birth to present

    International Nuclear Information System (INIS)

    Takahashi, Keizo

    2006-01-01

    As for the nuclear fuel reprocessing of the spent fuel, although there was argument of pros and cons, it was decided to start Rokkasho reprocessing project further at the Japan Atomic Energy Commission of ''Long-Term Program for Research, Development and Utilization of Nuclear Energy'' in year 2004. The operation of Tokai Reprocessing is going steadily to reprocess spent fuel more than 1,100 tons. In this paper, history, present status and future of reprocessing technology is discussed focusing from military Pu production, Magnox fuel reprocessing to oxide fuel reprocessing. Amount of reprocessed fuel are estimated based on fuel type. Then, history of reprocessing, US, UK, France, Germany, Russian, Belgian and Japan is presented and compared on technology, national character, development organization, environmental protection, and high active waste vitrification. Technical requirements are increased from Pu production fuel, Magnox fuel and oxide fuel mainly because of higher burnup. Reprocessing technology is synthetic of engineering and accumulation of operational experience. The lessons learned from the operational experience of the world will be helpful for establishment of nuclear fuel reprocessing technology in Japan. (author)

  11. E-waste management challenges in Iran: presenting some strategies for improvement of current conditions.

    Science.gov (United States)

    Taghipour, Hassan; Nowrouz, Parviz; Jafarabadi, Mohamad Asghari; Nazari, Jalil; Hashemi, Ahmad Asl; Mosaferi, Mohammad; Dehghanzadeh, Reza

    2012-11-01

    E-waste is one of the fastest-growing waste streams in Iran, owing to an increase in consumption of electrical and electronic equipment. Nevertheless, as is the case in some other countries, E-waste management has not received sufficient attention. For the successful implementation of any waste management plan (including an E-waste management plan), the availability of sufficient and accurate information on the quantities and composition of the waste generated and on current management conditions is a fundamental prerequisite. At present, in Iran, there is no available and accurate information that describes the characteristics and generation rate of E-waste or the actual practice of management and handling of the waste. For this initial study, eight electronic products were selected for the determination of their E-waste generation rate in the country, and two cities, Tehran and Tabriz, were selected for assessment of the current condition of E-waste management. The study found that the amount of E-waste generation in the country for the eight selected electronic items alone was 115,286, 112,914 and 115,151 metric tons in 2008, 2009 and 2010, respectively. Of the types of electronic items included in the study, televisions, with an average of 42.42%, and PCs, with an average of 32.66% accounted for the greatest proportions of the total mass of E-waste generated during 2008-2010. Currently, despite the fact that primary legislation for E-waste management (as part of general waste legislation) exists in Iran, this primary legislation has not yet been implemented. In practical terms, there is no definite policy or plan for the allocation of funds to prepare suitable equipment and facilities for the management and recycling of E-waste at the end of the products' useful life. Proposed improvements in current conditions are identified, first by considering other countries' experiences and then suggesting specific practical policies, rules, and regulations that should be

  12. Liquid lithium loop system to solve challenging technology issues for fusion power plant

    Science.gov (United States)

    Ono, M.; Majeski, R.; Jaworski, M. A.; Hirooka, Y.; Kaita, R.; Gray, T. K.; Maingi, R.; Skinner, C. H.; Christenson, M.; Ruzic, D. N.

    2017-11-01

    Steady-state fusion power plant designs present major divertor technology challenges, including high divertor heat flux both in steady-state and during transients. In addition to these concerns, there are the unresolved technology issues of long term dust accumulation and associated tritium inventory and safety issues. It has been suggested that radiation-based liquid lithium (LL) divertor concepts with a modest lithium-loop could provide a possible solution for these outstanding fusion reactor technology issues, while potentially improving reactor plasma performance. The application of lithium (Li) in NSTX resulted in improved H-mode confinement, H-mode power threshold reduction, and reduction in the divertor peak heat flux while maintaining essentially Li-free core plasma operation even during H-modes. These promising results in NSTX and related modeling calculations motivated the radiative liquid lithium divertor concept and its variant, the active liquid lithium divertor concept, taking advantage of the enhanced or non-coronal Li radiation in relatively poorly confined divertor plasmas. To maintain the LL purity in a 1 GW-electric class fusion power plant, a closed LL loop system with a modest circulating capacity of ~1 l s-1 is envisioned. We examined two key technology issues: (1) dust or solid particle removal and (2) real time recovery of tritium from LL while keeping the tritium inventory level to an acceptable level. By running the LL-loop continuously, it can carry the dust particles and impurities generated in the vacuum vessel to the outside where the dust/impurities can be removed by relatively simple dust filter, cold trap and/or centrifugal separation systems. With ~1 l s-1 LL flow, even a small 0.1% dust content by weight (or 0.5 g s-1) suggests that the LL-loop could carry away nearly 16 tons of dust per year. In a 1 GW-electric (or ~3 GW fusion power) fusion power plant, about 0.5 g s-1 of tritium is needed to maintain the fusion fuel cycle

  13. Present status and problems of remote systems technology in nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    1989-02-01

    This reports the activities of Special Committee on Remote Systems Technology, Atomic Energy Society of Japan, during the period from Oct. 1984 to Sep. 1988. The Committee studied and reviewed the present status and problems of remote operation and maintenance in various fields of nuclear industry. Reported items are; reactor operation, reprocessing, nuclear fusion and decommissioning. It also reviews robotics and remote systems tehcnology applied to space and marine development.

  14. Present status and problems of remote systems technology in nuclear industry

    International Nuclear Information System (INIS)

    1989-01-01

    This reports the activities of Special Committee on Remote Systems Technology, Atomic Energy Society of Japan, during the period from Oct. 1984 to Sep. 1988. The Committee studied and reviewed the present status and problems of remote operation and maintenance in various fields of nuclear industry. Reported items are; reactor operation, reprocessing, nuclear fusion and decommissioning. It also reviews robotics and remote systems tehcnology applied to space and marine development. (author)

  15. [What support of young presenting a first psychotic episode, when schooling is being challenged?

    Science.gov (United States)

    Vacheron, M-N; Veyrat-Masson, H; Wehbe, E

    2017-12-01

    functionally impaired because of evolving FEP although school is a key setting for promoting positive mental health, fostering resilience, detecting and responding to emerging mental ill health. So, people with psychotic illness have low levels of secondary school completion. School dropout has been defined as leaving education without obtaining a minimal credential, most often a higher secondary education diploma. In France, the school is compulsory up to the age of 16. Consequences are significant: among young people without a degree out of initial training for one to four years and present on the labour market, 47% are unemployed. School dropout depends on a number of factors, including grades, family and social environment and the relationship with the school, but also the emergence of psychiatric disorders. For first episode psychotic patients, age of onset, lack of family support, longer duration of psychosis, levels of premorbid global functioning and education, negative and cognitive symptoms, addictions, depressive comorbidities and stigma plays an important role in school dropout. However, young adults have historically received less treatment than expected considering prevalence of mental illness at that age. In the last few decades, early intervention programs for psychosis have been developed all around the world in order to promote rehabilitation and prevent long-term disabilities. Early intervention programs focus on the special needs of young people and their families and engage in some form of assertive community treatment, which attempts to treat patients in the community rather than using inpatient services. For early intervention in psychosis programs, the goal is to keep patients engaged with treatment, prevent them from further psychotic episodes and hospitalizations and promote rehabilitation. The additional services of an early intervention program include staff specialized in psychosis treatment, family/group/individual counseling sessions, assertive

  16. Emerging technologies for the detection of rabies virus: challenges and hopes in the 21st century.

    Directory of Open Access Journals (Sweden)

    Anthony R Fooks

    2009-09-01

    Full Text Available The diagnosis of rabies is routinely based on clinical and epidemiological information, especially when exposures are reported in rabies-endemic countries. Diagnostic tests using conventional assays that appear to be negative, even when undertaken late in the disease and despite the clinical diagnosis, have a tendency, at times, to be unreliable. These tests are rarely optimal and entirely dependent on the nature and quality of the sample supplied. In the course of the past three decades, the application of molecular biology has aided in the development of tests that result in a more rapid detection of rabies virus. These tests enable viral strain identification from clinical specimens. Currently, there are a number of molecular tests that can be used to complement conventional tests in rabies diagnosis. Indeed the challenges in the 21st century for the development of rabies diagnostics are not of a technical nature; these tests are available now. The challenges in the 21st century for diagnostic test developers are two-fold: firstly, to achieve internationally accepted validation of a test that will then lead to its acceptance by organisations globally. Secondly, the areas of the world where such tests are needed are mainly in developing regions where financial and logistical barriers prevent their implementation. Although developing countries with a poor healthcare infrastructure recognise that molecular-based diagnostic assays will be unaffordable for routine use, the cost/benefit ratio should still be measured. Adoption of rapid and affordable rabies diagnostic tests for use in developing countries highlights the importance of sharing and transferring technology through laboratory twinning between the developed and the developing countries. Importantly for developing countries, the benefit of molecular methods as tools is the capability for a differential diagnosis of human diseases that present with similar clinical symptoms. Antemortem

  17. Cleft deformities in adults and children aged over six years in Nigeria: Reasons for late presentation and management challenges

    Directory of Open Access Journals (Sweden)

    Wasiu L Adeyemo

    2009-11-01

    Full Text Available Wasiu L Adeyemo1, Mobolanle O Ogunlewe1, Ibironke Desalu2, Akinola L Ladeinde1, Bolaji O Mofikoya3, Michael O Adeyemi4, Adegbenga A Adepoju4, Olufemi O Hassan41Department of Oral and Maxillofacial Surgery, Faculty of Dental Sciences, 2Department of Anaesthesia, 3Department of Surgery, Faculty of Clinical Sciences, College of Medicine, University of Lagos, Lagos, Nigeria; 4Department of Oral and Maxillofacial Surgery, Lagos University Teaching Hospital, Lagos, NigeriaAbstract: In developing countries, untreated cleft lips and palates are found with increasing frequency and patients often present to the surgeon far past the optimal time for closure of the cleft deformities. A prospective study was conducted between March 2007 and September 2009, to identify the reasons and treatment challenges of delayed presentation of cleft lip and palate deformities at the Lagos University Teaching Hospital, Nigeria. Out of a total of 150 patients with cleft defects during the period, 43 (28.7% were adults and children aged over six years. The mean age of these patients at the time of presentation was 17.3 years. The most common reasons for late presentation were lack of money (56.7%, lack of health care services nearby (18.4%, and lack of awareness of treatment availability (13.3%. Common challenges in these patients included surgical, orthodontic, speech, anesthetic, and psychological. Although adult clefts were significantly enlarged in three dimensions the anatomic landmarks were easier to discern than in an infant. However, extensive soft tissue dissection in adult cleft lip repair resulted in significant postoperative edema. Closure of wide palatal cleft often required the use of adjunct intraoral flaps. Despite late presentation, surgical outcome of these patients was satisfactory and comparable to cleft repair in infants.Keywords: cleft deformities, adults, adolescents, late presentation, management, challenges

  18. Challenges and innovative technologies on fuel handling systems for future sodium-cooled fast reactors

    International Nuclear Information System (INIS)

    Chassignet, Mathieu; Dumas, Sebastien; Penigot, Christophe; Prele, Gerard; Capitaine, Alain; Rodriguez, Gilles; Sanseigne, Emmanuel; Beauchamp, Francois

    2011-01-01

    The reactor refuelling system provides the means of transporting, storing, and handling reactor core subassemblies. The system consists of the facilities and equipment needed to accomplish the scheduled refuelling operations. The choice of a FHS impacts directly on the general design of the reactor vessel (primary vessel, storage, and final cooling before going to reprocessing), its construction cost, and its availability factor. Fuel handling design must take into account various items and in particular operating strategies such as core design and management and core configuration. Moreover, the FHS will have to cope with safety assessments: a permanent cooling strategy to prevent fuel clad rupture, plus provisions to handle short-cooled fuel and criteria to ensure safety during handling. In addition, the handling and elimination of residual sodium must be investigated; it implies specific cleaning treatment to prevent chemical risks such as corrosion or excess hydrogen production. The objective of this study is to identify the challenges of a SFR fuel handling system. It will then present the range of technical options incorporating innovative technologies under development to answer the GENERATION IV SFR requirements. (author)

  19. Experimental facility for development of high-temperature reactor technology: instrumentation needs and challenges

    Directory of Open Access Journals (Sweden)

    Sabharwall Piyush

    2015-01-01

    Full Text Available A high-temperature, multi-fluid, multi-loop test facility is under development at the Idaho National Laboratory for support of thermal hydraulic materials, and system integration research for high-temperature reactors. The experimental facility includes a high-temperature helium loop, a liquid salt loop, and a hot water/steam loop. The three loops will be thermally coupled through an intermediate heat exchanger (IHX and a secondary heat exchanger (SHX. Research topics to be addressed include the characterization and performance evaluation of candidate compact heat exchangers such as printed circuit heat exchangers (PCHEs at prototypical operating conditions. Each loop will also include an interchangeable high-temperature test section that can be customized to address specific research issues associated with each working fluid. This paper also discusses needs and challenges associated with advanced instrumentation for the multi-loop facility, which could be further applied to advanced high-temperature reactors. Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integral System Test (ARTIST facility. A preliminary design configuration of the ARTIST facility will be presented with the required design and operating characteristics of the various components. The initial configuration will include a high-temperature (750 °C, high-pressure (7 MPa helium loop thermally integrated with a molten fluoride salt (KF-ZrF4 flow loop operating at low pressure (0.2 MPa, at a temperature of ∼450 °C. The salt loop will be thermally integrated with the steam/water loop operating at PWR conditions. Experiment design challenges include identifying suitable materials and components that will withstand the required loop operating conditions. The instrumentation needs to be highly accurate (negligible drift in measuring operational data for extended periods of times, as data collected will be

  20. Experimental facility for development of high-temperature reactor technology: instrumentation needs and challenges - 15066

    International Nuclear Information System (INIS)

    Sabharwall, P.; O'Brien, J.E.; Yoon, S.J.; Sun, X.

    2015-01-01

    A high-temperature, multi-fluid, multi-loop test facility is under development at the Idaho National Laboratory for support of thermal hydraulic, materials, and system integration research for high-temperature reactors. The experimental facility includes a high-temperature helium loop, a liquid salt loop, and a hot water/steam loop. The 3 loops will be thermally coupled through an intermediate heat exchanger (IHX) and a secondary heat exchanger (SHX). Research topics to be addressed include the characterization and performance evaluation of candidate compact heat exchangers such as printed circuits heat exchangers (PCHEs) at prototypical operating conditions. Each loop will also include an interchangeable high-temperature test section that can be customized to address specific research issues associated with each working fluid. This paper also discusses needs and challenges associated with advanced instrumentation for the multi-loop facility, which could be further applied to advanced high-temperature reactors. Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integrated System Test (ARTIST) facility. A preliminary design configuration of the ARTIST facility will be presented with the required design and operating characteristics of the various components. The initial configuration will include a high-temperature (750 C. degrees), high-pressure (7 MPa) helium loop thermally integrated with a molten fluoride salt (KF-ZrF 4 ) flow loop operating at low pressure (0.2 MPa), at a temperature of ∼ 450 C. degrees. The salt loop will be thermally integrated with the steam/water loop operating at PWR conditions. Experiment design challenges include identifying suitable materials and components that will withstand the required loop operating conditions. The instrumentation needs to be highly accurate (negligible drift) in measuring operational data for extended periods of times, as data collected will be

  1. Present state of inspection robot technology in nuclear power facilities. Case of fast breeder reactors

    International Nuclear Information System (INIS)

    Ara, Kuniaki

    1995-01-01

    In the maintenance works in nuclear power facilities such as checkup, inspection and repair, for the main purpose of radiation protection, remote operation technology was introduced since relatively early stage, and at present, the robots that carry out the inspection works for confirming the soundness of main equipment have been developed and put to practical use. At the time of introducing these technologies, in addition to the research and development of robots proper, the coordination with the design of plant machinery and equipment facilities as the premise of introducing robots is an important requirement. In this report, the present state of the development of remote inspection technology for fast breeder reactors is introduced, and the matters to which attention is paid in the plant design for introducing robots are explained. First, fast breeder reactors are described. The needs of robotizing and adopting remote operation in nuclear power facilities are explained, using the examples of the inspection system for a reactor vessel and the inspection system for steam generator heat transfer tubes. (K.I.)

  2. Presentation of a methodology for measuring social acceptance of three hydrogen storage technologies and preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Noirot, I.; Bigay, C. N.

    2005-07-01

    Hydrogen storage is a key technology for the extensive use of H2 as energy carrier. As none of the current technologies satisfies all of the hydrogen storage attributes required by manufacturers and end users, there is intense research works aiming at developing viable solutions. A broad objective of the StorHy European project is to provide technological storage solutions, which are attractive from an economical, environmental and safety point of view. A specific sub-project is dedicated to the comparison of three different potential storage technologies for transport applications (compressed gas, cryogenic liquid, solid media). This evaluation is carried out in a harmonised way, based on common tools and assessment strategies that could be useful for decision makers and stakeholders. The assessment is achieved in a 'sustainable development' spirit, taking into consideration the technical, environmental, economical, safety and social requirements. The latter ones have newly emerged in such evaluations, based on the Quality Function Deployment (QFD) approach, and would require to be further studied. Hydrogen acceptability studies have been conducted in previous projects. They have been reviewed by LBST in the AcceptH2 project Public acceptance of Hydrogen Transport Technologies : Analysis and comparisons of existing studies (www. accepth2. com - August 2003). During these hydrogen acceptance surveys, mainly fuel cell bus passengers from demonstration projects around the world have been questioned. The work presented in this paper goes further in the methodology refinement as it focuses on the evaluation of hydrogen storage solutions. It proposes a methodological tool for efficient social evaluation of new technologies and associated preliminary results concerning France. In a global approach to sustainable development, the CEA has developed a new methodology to evaluate its current research projects : Multicriteria Analysis for Sustainable Industrial

  3. Hanford Site Cleanup Challenges and Opportunities for Science and Technology--A Strategic Assessment

    International Nuclear Information System (INIS)

    Wood, Thomas W.; Johnson, Wayne L.; Kreid, Dennis K.; Walton, Terry L.

    2001-01-01

    The sheer expanse of the Hanford Site, the inherent hazards associated with the significant inventory of nuclear materials and wastes, the large number of aging contaminated facilities, the diverse nature and extent of environmental contamination, and the proximity to the Columbia River make Hanford perhaps the world's largest and most complex environmental cleanup project. It is not possible to address the more complex elements of this enormous challenge in a cost-effective manner without strategic investments in science and technology. Success requires vigorous and sustained efforts to enhance the science and technology basis, develop and deploy innovative solutions, and provide firm scientific bases to support site cleanup and closure decisions at Hanford

  4. Technological Solutions to Social and Citizen Problems. The Case of Civic and Public Challenges in Mexico

    Directory of Open Access Journals (Sweden)

    Martin Adalberto TENA-ESPINOZA-DE-LOS-MONTEROS

    2017-04-01

    Full Text Available This paper describes the process of civic innovation that, based on technological solutions and open initiatives, the civic society’s organization Codeando México suggests for the attention and solution of social and civic problems in Mexico. The Retos Cívicos (Civic Challenges and Retos Públicos (Public Challenges initiatives are addressed and described as experiences of innovation in the implementation of technological strategies for the solution of social and civic problems. A reflection is made on the civic appropriation of the ICTs and its irruption in the processes of innovation, as well as on the impact that the ICTs have in the conformation of a new civic ecosystem. Last, the strategies of Hacking cívico (Civic Hacking and Comunidades Cívicas (Civic Communities that the Codeando México organization promotes as a model for the linkage and civic participation within the frame of civic innovation, are mentioned.

  5. Composting technology in waste stabilization: On the methods, challenges and future prospects.

    Science.gov (United States)

    Onwosi, Chukwudi O; Igbokwe, Victor C; Odimba, Joyce N; Eke, Ifeanyichukwu E; Nwankwoala, Mary O; Iroh, Ikemdinachi N; Ezeogu, Lewis I

    2017-04-01

    Composting technology has become invaluable in stabilization of municipal waste due to its environmental compatibility. In this review, different types of composting methods reportedly applied in waste management were explored. Further to that, the major factors such as temperature, pH, C/N ratio, moisture, particle size that have been considered relevant in the monitoring of the composting process were elucidated. Relevant strategies to improve and optimize process effectiveness were also addressed. However, during composting, some challenges such as leachate generation, gas emission and lack of uniformity in assessing maturity indices are imminent. Here in, these challenges were properly addressed and some strategies towards ameliorating them were proffered. Finally, we highlighted some recent technologies that could improve composting. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Technological Innovation of Small and Medium Enterprises in Kosovo: Challenges and Barriers

    OpenAIRE

    Valon Kastrati

    2015-01-01

    The ability to innovate, is the main challenge in the fast changing global markets, to maintain a stable economic development in the long term. The ICT can carry strategic incentives to adjust the economic structure and to modify the economic model of a country. This process can build a resource-saving and a environmentally friendly society. The technological innovation can improve the international competitiveness of the economy and the overall employment rate of young generations. The rapid...

  7. Environment, energy, and world food resources. New challenges to research and technology policy

    Energy Technology Data Exchange (ETDEWEB)

    Stever, H G [National Science Foundation, Washington, D.C. (USA)

    1976-07-01

    If one tried to decide upon one single urgent task, a challenge for the natural sciences and technology alike, one probably would have to name the following: promotion of sound and appropriate economic growth by means of more effective and efficient utilization of resources; i.e., energy and natural resources of all kinds (whether these may be renewable or not), the process to be carried out by means that show as much concern for the environment as possible.

  8. [Challenge and opportunity of entry to WTO brings to scientific and technological periodical].

    Science.gov (United States)

    Tian, Yun-Mei

    2004-11-01

    After our country enters WTO, confronted with the direct influence in big international market opening, editorial department will face fierce competition. Selecting the superior and eliminate the inferior will test every publishing house and every magazine directly. In order to improve the competition level, author has analyzed the current situation of China's periodical development, and then explored the scientific and technological periodical opportunity and challenge faced under the new situation.

  9. Promoting Children's Learning through Technology Literacy: Challenges to School Librarians in the 21st Century

    Science.gov (United States)

    Ejikeme, Anthonia N.; Okpala, Helen N.

    2017-01-01

    In today's world of technological revolution, children need to be encouraged to be ready to acquire lifelong knowledge and skills in the 21st century. This paper presents an overview of the application of technologies in children's learning environment which apparently will give them the opportunity of making use of their thinking skills in order…

  10. Regulatory Infrastructure for Radiation Safety and the Security of Radioactive Sources in Sudan, Present Status, Achievements and Future Challenges

    International Nuclear Information System (INIS)

    Osman, M.Y.

    2008-01-01

    Regulation of the use of ionizing radiation started formally in 1971 when an act has been issued by which the ministry of health was entitled to establish a Radiation Protection Technical Committee (RPTC) as a regulatory body. However, this act didn't come into effect because of the lack of regulations needed to execute the regulatory functions stated in that law. In 1972 the Sudan Atomic Energy Commission (SAEC) act was issued by which the commission was designated as a promoter for the use of nuclear technology. This law was later replaced by the 1996 act by which the Sudan Atomic Energy Corporation (SAEC) was established within the ministry of higher education and latter within the Ministry of Science and Technology (MOST). The board of the corporation established a technical committee (Radiation Protection Technical Committee (RPTC)) to carry out the regulatory functions assigned to the board by the act. The 1996 act didn't repeal the 1971 act; as a result, the two conflicting and overlapping acts are still valid. In 2003 the 1996 act was cancelled and to be replaced by an Order of Establishment within a general law for corporations in the Sudan. In spite of all these mess in providing a proper legislative framework, the RPTC (MOST) managed to secure a fair control of the use of radiation in different applications within the country. In this report, the current status of regulating the use of ionizing radiation as well as major challenges is described

  11. eHEALTH SERVICES AND TECHNOLOGY: CHALLENGES FOR CO-DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Hannele Hyppönen

    2007-01-01

    Full Text Available The promises of ICT have been poorly redeemed in health care; many projects have failed. This article conceptualizes the co-construction of services and technologies in order to help future practitioners in the field to understand and find solutions to the challenges in ICT-enhanced service change. The conceptualization is created by structuring the findings of a case study with the help of theoretical concepts. The conceptualization then is implemented in another case to study its potential for finding challenges and suggesting solutions. Both cases demonstrate challenges for codevelopment that contributed to poor project outcomes. Participants in eHealth projects need a better understanding of development as the parallel shaping of multiple objects. They need better skills in managing the change process and a better understanding of methods for collaboration throughout the development. The projects would benefit from networking with actors who have adequate understanding of the process as a whole and of methods of codevelopment.

  12. Mass Media’s Perspective on the Challenges of Information and Communication Technology (ICT) in Indonesia

    Science.gov (United States)

    Junaidi

    2017-12-01

    This study investigated the challenges of Information and Communication Technology (ICT) in Indonesia based on mass media’s perspective. The challenges of ICT on mass media’s perspective are very complex. Some of these challenges include the consideration of the advantages and disadvantages of ICT, threats to the unity of the country, cultural problems, regulation, business competition among operators, Pokemon Go booming, the existence of social media which triggers hostility between people and the increasing rate of the interconnection cost. Among the main reasons to this phenomenon is a need of massive investment to build the infrastructures. This study used Robert N. Entman framing model to analyze the headlines of Majalah ICT (an ICT magazine).

  13. Medical student case presentation performance and perception when using mobile learning technology in the emergency department.

    Science.gov (United States)

    Tews, Matthew; Brennan, Kimberly; Begaz, Tomer; Treat, Robert

    2011-01-01

    Hand-held mobile learning technology provides opportunities for clinically relevant self-instructional modules to augment traditional bedside teaching. Using this technology as a teaching tool has not been well studied. We sought to evaluate medical students' case presentation performance and perception when viewing short, just-in-time mobile learning videos using the iPod touch prior to patient encounters. Twenty-two fourth-year medical students were randomized to receive or not to receive instruction by video, using the iPod Touch, prior to patient encounters. After seeing a patient, they presented the case to their faculty, who completed a standard data collection sheet. Students were surveyed on their perceived confidence and effectiveness after using these videos. Twenty-two students completed a total of 67 patient encounters. There was a statistically significant improvement in presentations when the videos were viewed for the first time (p=0.032). There was no difference when the presentations were summed for the entire rotation (p=0.671). The reliable (alpha=0.97) survey indicated that the videos were a useful teaching tool and gave students more confidence in their presentations. Medical student patient presentations were improved with the use of mobile instructional videos following first time use, suggesting mobile learning videos may be useful in medical student education. Clinical educators should consider whether, in an instance where live bedside or direct interactive teaching is unavailable, using just-in-time educational videos on a handheld device might be useful as a supplemental instructional strategy.

  14. China's wind power industry: Policy support, technological achievements, and emerging challenges

    International Nuclear Information System (INIS)

    Wang, Zhongying; Qin, Haiyan; Lewis, Joanna I.

    2012-01-01

    Since 2005 the Chinese wind power technology industry has developed rapidly, with China becoming the largest installer of wind power capacity in the world in 2010. This paper reviews the policy system implemented in China to support the wind power industry, centered on China's 2005 Renewable Energy Law. It examines the industry's achievements over the past two decades, including the development of wind power technology and equipment, the utilization of China's wind power resources, and the cost reductions achieved. It then explores the obstacles affecting the ongoing sustainability of the Chinese wind industry, including regulatory barriers, grid integration challenges, and challenges to continued technological innovation. It recommends that integration challenges be addressed through policy reforms, establishing interconnection standards, and creating predictability with forecasting and storage; that market signals be established with long-term development goals and pricing reforms; and that industry limitations be addressed with targeted R and D, improved wind resource assessment and transparency, domestic and international collaborations, and the cultivation of a skilled workforce. - Highlights: ► Review the policy system and the achievements of Chinese wind industry. ► Analyze the obstacles affecting the sustainability of the industry. ► Provide recommendations for how China can address these obstacles.

  15. Proceeding of the Fifth Scientific Presentation on Nuclear Fuel Cycle: Development of Nuclear Fuel Cycle Technology in Third Millennium

    International Nuclear Information System (INIS)

    Suripto, A.; Sastratenaya, A.S.; Sutarno, D.

    2000-01-01

    The proceeding contains papers presented in the Fifth Scientific Presentation on Nuclear Fuel Element Cycle with theme of Development of Nuclear Fuel Cycle Technology in Third Millennium, held on 22 February in Jakarta, Indonesia. These papers were divided by three groups that are technology of exploration, processing, purification and analysis of nuclear materials; technology of nuclear fuel elements and structures; and technology of waste management, safety and management of nuclear fuel cycle. There are 35 papers indexed individually. (id)

  16. The place of space technology in economic development: Reflections on present and future aspects

    Science.gov (United States)

    Lebeau, A.; Reuter, K. E.

    1980-01-01

    The effects of the development of satellite applications on the orientation of the space effort were examined. The gap between available and exploited technology, the impact of the current economic climate and future trends are discussed. Europe's low level of public funding for its space effort, in comparison to other space powers, and the dangers of complacency regarding Europe's competitiveness in the space market are illustrated. A proposal for the general direction which Europe's future strategy must take if European independence in this field is to be preserved is presented.

  17. A dual use case study of space technologies for terrestrial medical applications (Conference Presentation)

    Science.gov (United States)

    Cozmuta, Ioana

    2017-05-01

    Many challenges exist in understanding the human body as a whole, its adaptability, its resilience, its immunological response, its healing and regeneration power. New knowledge is usually obtained by exploring unique conditions and environments and space is one such variable. Primarily, these attributes have been studied in space for the purpose of understanding the effect of the space environment on long duration space travel. However a myriad of lessons learned have emerged that are important for terrestrial medicine problems such as cardiovascular changes, intracranial pressure changes, vision changes, reduced immunity, etc. For medical study purposes, the changes induced by the space environment on the human body are in general fast and predictable; they persist while in the space environment but also revert to the initial pre-flight healthy state upon return to Earth. This provides a unique cycle to study wellness and disease prediction as well as to develop more effective countermeasures for the benefit of people on earth. At a scientific level, the environment of space can be used to develop new lines of investigations and new knowledge to push the terrestrial state of the art (i.e. study of phase diagrams, identification of new system's states, etc). Moreover, the specialized requirements for space medicine have driven advances in terrestrial medical technologies in areas such as monitoring, diagnostic, prevention and treatment. This talk will provide an overview of compelling examples in key areas of interest for terrestrial medical applications.

  18. Challenges in the management of early versus late presenting congenital diaphragmatic hernia in a poor resource setting

    Directory of Open Access Journals (Sweden)

    Abubakar Auwal

    2011-01-01

    Full Text Available Background: Despite the advances in management, congenital diaphragmatic hernia (CDH has continued to pose a significant challenge to paediatric surgeons. This is amplified in a setting like ours where there is a dearth of facilities to cope with the problem of CDH. This study was undertaken to highlight the peculiarities of the management of CDH in a poor resource setting. Methods: All confirmed cases of CDH were prospectively documented from 2003 till date. Results: Seven children were treated from 2003 till date. The diaphragmatic defect was on the left side in six (83.8% and on the right side in one (17.7%. All the patients had primary closure of the defect without patch via an abdominal approach. The three patients presenting at birth died while the remaining four patients survived. Conclusion: With inadequate neonatal intensive care facilities, the severe early presenting CDH has a dismal prognosis. In contrast, the late presenting CDH poses more diagnostic challenges; but once identified and appropriate treatment instituted, it has an excellent prognosis. We recommend that physicians should include CDH in the differential diagnosis of patients with birth asphyxia and in patients with chronic respiratory symptoms with failure to thrive.

  19. Fish bone foreign body presenting with an acute fulminating retropharyngeal abscess in a resource-challenged center: a case report

    Directory of Open Access Journals (Sweden)

    Oyewole Ezekiel O

    2011-04-01

    Full Text Available Abstract Introduction A retropharyngeal abscess is a potentially life-threatening infection in the deep space of the neck, which can compromise the airway. Its management requires highly specialized care, including surgery and intensive care, to reduce mortality. This is the first case of a gas-forming abscess reported from this region, but not the first such report in the literature. Case presentation We present a case of a 16-month-old Yoruba baby girl with a gas-forming retropharyngeal abscess secondary to fish bone foreign body with laryngeal spasm that was managed in the recovery room. We highlight specific problems encountered in the management of this case in a resource-challenged center such as ours. Conclusion We describe an unusual presentation of a gas-forming organism causing a retropharyngeal abscess in a child. The patient's condition was treated despite the challenges of inadequate resources for its management. We recommend early recognition through adequate evaluation of any oropharyngeal injuries or infection and early referral to the specialist with prompt surgical intervention.

  20. Adaptation and development of software simulation methodologies for cardiovascular engineering: present and future challenges from an end-user perspective.

    Science.gov (United States)

    Díaz-Zuccarini, V; Narracott, A J; Burriesci, G; Zervides, C; Rafiroiu, D; Jones, D; Hose, D R; Lawford, P V

    2009-07-13

    This paper describes the use of diverse software tools in cardiovascular applications. These tools were primarily developed in the field of engineering and the applications presented push the boundaries of the software to address events related to venous and arterial valve closure, exploration of dynamic boundary conditions or the inclusion of multi-scale boundary conditions from protein to organ levels. The future of cardiovascular research and the challenges that modellers and clinicians face from validation to clinical uptake are discussed from an end-user perspective.

  1. Novel Suicide by Division of a Chronically Infected, Externalised Axillofemoral Graft Presenting Challenges in Prehospital Assessment of Mental Capacity

    Directory of Open Access Journals (Sweden)

    Lewis G. Stevens

    2012-01-01

    Full Text Available Assessing a patient's competence to give informed consent in pre-hospital care is difficult. In the presented case an elderly patient attempted suicide by division of a chronically infected and externalised prosthetic arterial graft. He was able to comprehend his situation and understand the consequences of declining treatment. Without prior knowledge of his medical care and psychological state, however, we did not believe we could fully assess the patient's ability to act in his own best interest. After sedation and resuscitation he was transferred to hospital. This case report discusses a unique method of suicide and the challenge of obtaining valid consent in prehospital care.

  2. WLB in the UK: Present situation and challenges for national and corporate initiatives, suggestions for Japan (Japanese)

    OpenAIRE

    YAJIMA Yoko

    2011-01-01

    In this paper, we develop a sense of the present situation and challenges of work-life balance (WLB) policies, corporate initiatives, and the workplace environment from the perspective of workers in the UK, and we carry out a comparison analysis with initiatives in Japan. Further, the analysis in this paper is a summary based on the results of a questionnaire survey of workers in Japan and the UK, a survey of the literature, and the results of local interview surveys in the UK. The UK resembl...

  3. RESPONSIVENESS, LANGUAGE, AND ALIGNMENT: REFLECTIONS ON SOME CHALLENGES FOR HEALTH TECHNOLOGY ASSESSMENT.

    Science.gov (United States)

    Dillon, Andrew

    2015-01-01

    Health systems around the world cope with the challenge of difficult economic times, and the value of health technology assessment (HTA) is increasing. Making the right choices, with limited resources, in the face of increasingly complex technologies requires decisions informed by data and analyses that help us to manage the risks involved. Those who undertake and use HTA can play a greater role in helping decision makers meet these challenges; they need to think how to define innovation and respond to it, how to communicate their analyses, and, critically, how to align their work with the ambitions of their health systems. HTA can become a key health system enabler without compromising its objectivity or independence. It can say that it is too early to determine the value of a new technology when the data simply will not support a safe decision. However, it can also be bold and recommend the managed introduction of new technologies, even when the when the data is immature, provided that the health system understands the risks and there is a plausible case for believing that further research will support the value proposition. The goal for HTA is to be able confidently to do both.

  4. Nuclear cooperation targets global challenges. States back main pillars of the IAEA's work to strengthen nuclear safety, verification and technology transfer

    International Nuclear Information System (INIS)

    2000-01-01

    States meeting at the 44th IAEA General Conference in Vienna have set a challenging agenda for international nuclear cooperation into the 21st century that targets issues of global safety, security, and sustainable development. They adopted resolutions endorsing the Agency's programmes for strengthening activities under its three main pillars of work - nuclear verification, safety, and technology - that are closely linked to major challenges before the world. The document presents the main actions taken during the conference

  5. Centennial Challenges Program Overview: How NASA Successfully Involves the General Public in the Solving of Current Technology Gaps

    Science.gov (United States)

    Roman, Monsi C.; Kim, Tony; Sudnik, Janet; Sivak, Amy; Porter, Molly; Cylar, Rosaling; Cavanaugh, Dominique; Krome, Kim

    2017-01-01

    The National Aeronautics and Space Administration (NASA) Centennial Challenges Program, part of the Space Technology Mission Directorate (STMD), addresses key technology needs of NASA and the nation, while facilitating new sources of innovation outside the traditional community. This is done by the direct engagement of the public at large, through the offering of Congressional authorized prize purses and associated challenges developed by NASA and the aerospace community and set up as a competition awarding the prize money for achieving the specified technology goal.

  6. High End Computing Technologies for Earth Science Applications: Trends, Challenges, and Innovations

    Science.gov (United States)

    Parks, John (Technical Monitor); Biswas, Rupak; Yan, Jerry C.; Brooks, Walter F.; Sterling, Thomas L.

    2003-01-01

    Earth science applications of the future will stress the capabilities of even the highest performance supercomputers in the areas of raw compute power, mass storage management, and software environments. These NASA mission critical problems demand usable multi-petaflops and exabyte-scale systems to fully realize their science goals. With an exciting vision of the technologies needed, NASA has established a comprehensive program of advanced research in computer architecture, software tools, and device technology to ensure that, in partnership with US industry, it can meet these demanding requirements with reliable, cost effective, and usable ultra-scale systems. NASA will exploit, explore, and influence emerging high end computing architectures and technologies to accelerate the next generation of engineering, operations, and discovery processes for NASA Enterprises. This article captures this vision and describes the concepts, accomplishments, and the potential payoff of the key thrusts that will help meet the computational challenges in Earth science applications.

  7. Technology 2.0: A Commentary on Progress, Challenges, and Next Steps.

    Science.gov (United States)

    Jones, Deborah J

    2017-11-01

    This commentary highlights the importance and promise of the innovative strategies described in the Child Maltreatment special issue on "Technology 2.0: A Focus on the Newest Technological Advances in Child Maltreatment Research." The commentary first highlights the collective advancements reflected in the articles in the special issue, with a primary focus on how the authors' work addresses a general challenge in services research that is perhaps nowhere more problematic than in the field of maltreatment. Next, the commentary extends the discussion of these articles to raise remaining gaps in our knowledge, theory, and methodology, which must be the focus of ongoing research if the true potential of technology as a service delivery vehicle is to be realized. Finally, the commentary concludes with a call for subsequent research which will be inspired by the articles in this special issue.

  8. [Adoption of new technologies by health services: the challenge of analyzing relevant factors].

    Science.gov (United States)

    Trindade, Evelinda

    2008-05-01

    The exponential increase in the incorporation of health technologies has been considered a key factor in increased expenditures by the health sector. Such decisions involve multiple levels and stakeholders. Decentralization has multiplied the decision-making levels, with numerous difficult choices and limited resources. The interrelationship between stakeholders is complex, in creative systems with multiple determinants and confounders. The current review discusses the interaction between the factors influencing the decisions to incorporate technologies by health services, and proposes a structure for their analysis. The application and intensity of these factors in decision-making and the incorporation of products and programs by health services shapes the installed capacity of local and regional networks and modifies the health system. Empirical observation of decision-making and technology incorporation in Brazilian health services poses an important challenge. The structured recognition and measurement of these variables can assist proactive planning of health services.

  9. RFID technology in health environment opportunities and challenges for modern cancer care.

    Science.gov (United States)

    Safdari, Reza; Maserat, Elham; Maserat, Elnaz

    2012-01-01

    Cancers are significant contributors to the mortality and health care expenditures. Cancer can be reduced and monitored by new information technology. Radio frequency identification or RFID is a wireless identification technology. The use of this technology can be employed for identifying and tracking clinical staff, patients, supplies, medications and equipments. RFID can trace and manage chemotherapy drugs. There are different types of RFID. Implantable RFID allowing a chip to be embedded under the skin and that store the cancer patient's identifier. These are concerns about applications of RFID. Privacy, security and legal issues are key problems. This paper describes capabilities, benefits and confidentiality aspects in radio frequency identification systems and solutions for overcoming challenges.

  10. Digital culture as a converging paradigm for technology and culture: Challenges for the culture sector

    Directory of Open Access Journals (Sweden)

    Aleksandra Uzelac

    2010-05-01

    Full Text Available Digital culture is a new and complex concept. Digital advances are increasingly interacting with the world of culture and the arts, leading to a convergence of technologies, media and information and shaping communication modes. The new possibilities offered by the digital technologies -namely, global connectivity and the emergence of new networks- challenge our traditional understanding of culture and make it necessary for us to take on the board the concept of a digital culture. This article views digital culture as a new social system that determines experiences and opportunities for the citizens of today. Digital technologies and the networked environment have introduced new practices, opportunities and threats, and the culture sector needs to find appropriate ways for operating in this new reality.

  11. Optimizing the Information Presentation on Mining Potential by using Web Services Technology with Restful Protocol

    Science.gov (United States)

    Abdillah, T.; Dai, R.; Setiawan, E.

    2018-02-01

    This study aims to develop the application of Web Services technology with RestFul Protocol to optimize the information presentation on mining potential. This study used User Interface Design approach for the information accuracy and relevance as well as the Web Service for the reliability in presenting the information. The results show that: the information accuracy and relevance regarding mining potential can be seen from the achievement of User Interface implementation in the application that is based on the following rules: The consideration of the appropriate colours and objects, the easiness of using the navigation, and users’ interaction with the applications that employs symbols and languages understood by the users; the information accuracy and relevance related to mining potential can be observed by the information presented by using charts and Tool Tip Text to help the users understand the provided chart/figure; the reliability of the information presentation is evident by the results of Web Services testing in Figure 4.5.6. This study finds out that User Interface Design and Web Services approaches (for the access of different Platform apps) are able to optimize the presentation. The results of this study can be used as a reference for software developers and Provincial Government of Gorontalo.

  12. Positive technology–A powerful partnership between positive psychology and interactive technology. A discussion of potential and challenges.

    Directory of Open Access Journals (Sweden)

    Sarah Diefenbach

    2017-11-01

    Full Text Available Under the umbrella term "positive computing" concepts of positive psychology are transferred to the domain of human-computer interaction (HCI. In an interdisciplinary community psychologist, computer scientists, designers and others are exploring promising ways how to utilize interactive technology to support wellbeing and human flourishing. Along with this, the recent popularity of smartphone apps aiming at the improvement of health behavior, mindfulness and positive routines, suggests the general acceptance of technology as a facilitator of personal development. Given this, there generally seems a high potential for a technology mediated trigger of positive behavior change, especially in context of positive psychology and resource oriented approaches such as solution-focused coaching. At the same time, there is still a lack of well-founded approaches to design such technology which consider its responsible role as an "interactive coach" and systematically integrate the needed expertise of different disciplines. The present article discusses the general potential and particular challenges to support the goals of positive psychology and human desire for self-improvement through interactive technology and highlights critical steps for a successful partnership between both.

  13. The Use of New Technologies for the Teaching of the Igbo Language in Schools: Challenges and Prospects

    Science.gov (United States)

    Iloene, Modesta I.; Iloene, George O.; Mbah, Evelyn E.; Mbah, Boniface M.

    2013-01-01

    This paper examines the experience of teachers in the use of new technologies to teach the Igbo language spoken in South East Nigeria. The study investigates the extent to which new technologies are available and accessible to Igbo teachers, the competence of the Igbo language teachers in the new technologies and the challenges they face that…

  14. Technological challenges of addressing new and more complex migrating products from novel food packaging materials.

    Science.gov (United States)

    Munro, Ian C; Haighton, Lois A; Lynch, Barry S; Tafazoli, Shahrzad

    2009-12-01

    The risk assessment of migration products resulting from packaging material has and continues to pose a difficult challenge. In most jurisdictions, there are regulatory requirements for the approval or notification of food contact substances that will be used in packaging. These processes generally require risk assessment to ensure safety concerns are addressed. The science of assessing food contact materials was instrumental in the development of the concept of Threshold of Regulation and the Threshold of Toxicological Concern procedures. While the risk assessment process is in place, the technology of food packaging continues to evolve to include new initiatives, such as the inclusion of antimicrobial substances or enzyme systems to prevent spoilage, use of plastic packaging intended to remain on foods as they are being cooked, to the introduction of more rigid, stable and reusable materials, and active packaging to extend the shelf-life of food. Each new technology brings with it the potential for exposure to new and possibly novel substances as a result of migration, interaction with other chemical packaging components, or, in the case of plastics now used in direct cooking of products, degradation products formed during heating. Furthermore, the presence of trace levels of certain chemicals from packaging that were once accepted as being of low risk based on traditional toxicology studies are being challenged on the basis of reports of adverse effects, particularly with respect to endocrine disruption, alleged to occur at very low doses. A recent example is the case of bisphenol A. The way forward to assess new packaging technologies and reports of very low dose effects in non-standard studies of food contact substances is likely to remain controversial. However, the risk assessment paradigm is sufficiently robust and flexible to be adapted to meet these challenges. The use of the Threshold of Regulation and the Threshold of Toxicological Concern concepts may

  15. Challenges in managing paediatric osteomyelitis in the developing world: Analysis of cases presenting to a tertiary referral centre in Tanzania

    Directory of Open Access Journals (Sweden)

    Adam M Ali

    2014-01-01

    Full Text Available Background: The literature on paediatric osteomyelitis in the developing world is scarce, and there have been calls for further characterisation of its epidemiology and the identification of factors that limit effective management in order to guide local service delivery. Our centre is a hospital serving a population of 11 million people in Tanzania. Materials and Methods: We identified patients 3 months. Twelve out of 13 with a time from symptom onset to presentation of <2 months did not develop recurrence. Conclusions: This is, to the best of our knowledge, the second largest study of paediatric osteomyelitis in the developing world. Major challenges facing this centre include a lack of availability of bacterial cultures and failure to attend follow-up. Delayed presentation of osteomyelitis to our centre is associated with recurrence of infection.

  16. Challenges in process marginality for advanced technology nodes and tackling its contributors

    Science.gov (United States)

    Narayana Samy, Aravind; Schiwon, Roberto; Seltmann, Rolf; Kahlenberg, Frank; Katakamsetty, Ushasree

    2013-10-01

    Process margin is getting critical in the present node shrinkage scenario due to the physical limits reached (Rayleigh's criterion) using ArF lithography tools. K1 is used to its best for better resolution and to enhance the process margin (28nm metal patterning k1=0.31). In this paper, we would like to give an overview of various contributors in the advanced technology nodes which limit the process margins and how the challenges have been tackled in a modern foundry model. Advanced OPC algorithms are used to make the design content at the mask optimum for patterning. However, as we work at the physical limit, critical features (Hot-spots) are very susceptible to litho process variations. Furthermore, etch can have a significant impact as well. Pattern that still looks healthy at litho can fail due to etch interactions. This makes the traditional 2D contour output from ORC tools not able to predict accurately all defects and hence not able to fully correct it in the early mask tapeout phase. The above makes a huge difference in the fast ramp-up and high yield in a competitive foundry market. We will explain in this paper how the early introduction of 3D resist model based simulation of resist profiles (resist top-loss, bottom bridging, top-rounding, etc.,) helped in our prediction and correction of hot-spots in the early 28nm process development phase. The paper also discusses about the other overall process window reduction contributors due to mask 3D effects, wafer topography (focus shifts/variations) and how this has been addressed with different simulation efforts in a fast and timely manner.

  17. Hanford Site Cleanup Challenges and Opportunities for Science and Technology - A Strategic Assessment

    International Nuclear Information System (INIS)

    Johnson, W.; Reichmuth, B.; Wood, T.; Glasper, M.; Hanson, J.

    2002-01-01

    In November 2000, the U.S. Department of Energy (DOE) Richland Operations Office (RL) initiated an effort to produce a single, strategic perspective of RL Site closure challenges and potential Science and Technology (S and T) opportunities. This assessment was requested by DOE Headquarters (HQ), Office of Science and Technology, EM-50, as a means to provide a site level perspective on S and T priorities in the context of the Hanford 2012 Vision. The objectives were to evaluate the entire cleanup lifecycle (estimated at over $24 billion through 2046), to identify where the greatest uncertainties exist, and where investments in S and T can provide the maximum benefit. The assessment identified and described the eleven strategic closure challenges associated with the cleanup of the Hanford Site. The assessment was completed in the spring of 2001 and provided to DOE-HQ and the Hanford Site Technology Coordination Group (STCG) for review and input. It is the first step in developing a Site-level S and T strategy for RL. To realize the full benefits of this assessment, RL and Site contractors will work with the Hanford STCG to ensure: identified challenges and opportunities are reflected in project baselines; detailed S and T program-level road maps reflecting both near- and long-term investments are prepared using this assessment as a starting point; and integrated S and T priorities are incorporated into Environmental Management (EM) Focus Areas, Environmental Management Science Program (EMSP) and other research and development (R and D) programs to meet near-term and longer-range challenges. Hanford is now poised to begin the detailed planning and road mapping necessary to ensure that the integrated Site level S and T priorities are incorporated into the national DOE S and T program and formally incorporated into the relevant project baselines. DOE-HQ's response to this effort has been very positive and similar efforts are likely to be undertaken at other sites

  18. Challenges faced on Cacimbas-Catu gas pipeline (Gascac) construction and the technologies applied to achieve success

    Energy Technology Data Exchange (ETDEWEB)

    Ruschi, Allan; Cardos, Celina; Soares, Felipe; Mariot, Guilherme; Loureiro, Regis R [Petroleo Brasileiro S/A, Petrobras Engineering, Rio de Janeiro/ RJ (Brazil)

    2010-07-01

    The GASENE project is the largest gas pipeline constructed in Brazil in the past 10 years, it interconnects the southeast to the northeast of Brazil. The Cacimbas Catu Gas Pipeline (GASCAC) is a part of the project; it has a 28 inch diameter and is 958 km long. The aim of this paper is to present the construction and assembly process undertaken to meet the deadline and complete the GASCAC to a high quality standard. The main challenges of this project were its length, the short period for completion and the numerous geological and man-made features along the pipeline route. To overcome these difficulties, technologies that had never been used in Brazil before were employed, such as vacuum pipe lifting, bag weights and automatic welding. The GASCAC project was completed in time and with to a high standard of quality, demonstrating that strategic planning and the use of new technologies can increase productivity, quality and safety.

  19. Telerehabilitation Clinical and Vocational Applications for Assistive Technology: Research, Opportunities, and Challenges

    Directory of Open Access Journals (Sweden)

    Mark R. Schmeler

    2009-09-01

    Full Text Available Rehabilitation service providers in rural or underserved areas are often challenged in meeting the needs of their complex patients due to limited resources in their geographical area. Recruitment and retention of the rural clinical workforce are beset by the ongoing problems associated with limited continuing education opportunities, professional isolation, and the challenges inherent in coordinating rural community healthcare. People with disabilities who live in rural communities also face challenges accessing healthcare. Traveling long distances to a specialty clinic for necessary expertise may be troublesome due to inadequate or unavailable transportation, disability specific limitations, and financial limitations. Distance and lack of access are just two threats to quality of care that now being addressed by the use of videoconferencing, information exchange, and other telecommunication technologies that facilitate telerehabilitation. This white paper illustrates and summarizes clinical and vocational applications of telerehabilitation. We provide definitions related to the fields of telemedicine, telehealth, and telerehabilitation, and consider the impetus for telerehabilitation. We review the telerehabilitation literature for assistive technology applications; pressure ulcer prevention; virtual reality applications; speech-language pathology applications; seating and wheeled mobility applications; vocational rehabilitation applications; and cost effectiveness. We then discuss external telerehabilitation influencers, such as the positions of professional organizations. Finally, we summarize clinical and policy issues in a limited context appropriate to the scope of this paper. Keywords: Telerehabilitation, Telehealth, Telemedicine, Telepractice

  20. Telerehabilitation clinical and vocational applications for assistive technology: research, opportunities, and challenges.

    Science.gov (United States)

    Schmeler, Mark R; Schein, Richard M; McCue, Michael; Betz, Kendra

    2009-01-01

    Rehabilitation service providers in rural or underserved areas are often challenged in meeting the needs of their complex patients due to limited resources in their geographical area. Recruitment and retention of the rural clinical workforce are beset by the ongoing problems associated with limited continuing education opportunities, professional isolation, and the challenges inherent in coordinating rural community healthcare. People with disabilities who live in rural communities also face challenges accessing healthcare. Traveling long distances to a specialty clinic for necessary expertise may be troublesome due to inadequate or unavailable transportation, disability specific limitations, and financial limitations. Distance and lack of access are just two threats to quality of care that now being addressed by the use of videoconferencing, information exchange, and other telecommunication technologies that facilitate telerehabilitation. This white paper illustrates and summarizes clinical and vocational applications of telerehabilitation. We provide definitions related to the fields of telemedicine, telehealth, and telerehabilitation, and consider the impetus for telerehabilitation. We review the telerehabilitation literature for assistive technology applications; pressure ulcer prevention; virtual reality applications; speech-language pathology applications; seating and wheeled mobility applications; vocational rehabilitation applications; and cost-effectiveness. We then discuss external telerehabilitation influencers, such as the positions of professional organizations. Finally, we summarize clinical and policy issues in a limited context appropriate to the scope of this paper.

  1. Survey of the strategic competence needs regarding nuclear technology at present and in the future

    International Nuclear Information System (INIS)

    Karnik, Peter; Hammar, Lennart

    2001-12-01

    The Swedish Nuclear Power Inspectorate (SKI) has been commissioned by the government to present a strategy for future directions and priorities regarding the nuclear technology research. This should be done before the end of year 2001. A part of this work is to determine the national future need of competence and how the competence needs should be satisfied. ES-konsult has been assigned by SKI to evaluate the competence needs - based on a questionnaire survey - for the industry and SKI, especially critical nuclear competence that is needed to maintain safety. The nuclear competence can be decreasing as a result of the political decision that the nuclear power should be phased out in Sweden. The purpose is to use the results from the questionnaire as a starting point and then investigate the demands on relevant education at universities. The questionnaire has been prepared in cooperation with SKI. Data has been collected about strategic nuclear technical competencies divided into eleven different defined competence areas. The questions concerned the number of employees with education from universities, within each of one of the eleven competence areas defined. The need of competent employees should also be predicted looking 10 years ahead from now. When it comes to employees today, they have been divided into different categories depending on education, age and experience. The staff turnover for the last five years was also asked for. In the questionnaire there were also some general questions regarding this matter. The collected data covers 709 employees on the power plants, SKI, SKB, Westinghouse Atom, Studsvik, DNV Nuclear Technology, SQC and KSU. The data is presented and discussed in the report. The role of specific nuclear technical competence in the strategic competence areas is especially discussed. In some cases the competence areas consists of general technical and scientific knowledge that will be available in the future regardless of the nuclear power

  2. Fundamental and Technical Challenges for a Compatible Design Scheme of Oxyfuel Combustion Technology

    Directory of Open Access Journals (Sweden)

    Chuguang Zheng

    2015-03-01

    Full Text Available Oxyfuel combustion with carbon capture and sequestration (CCS is a carbon-reduction technology for use in large-scale coal-fired power plants. Significant progress has been achieved in the research and development of this technology during its scaling up from 0.4 MWth to 3 MWth and 35 MWth by the combined efforts of universities and industries in China. A prefeasibility study on a 200 MWe large-scale demonstration has progressed well, and is ready for implementation. The overall research development and demonstration (RD&D roadmap for oxyfuel combustion in China has become a critical component of the global RD&D roadmap for oxyfuel combustion. An air combustion/oxyfuel combustion compatible design philosophy was developed during the RD&D process. In this paper, we briefly address fundamental research and technology innovation efforts regarding several technical challenges, including combustion stability, heat transfer, system operation, mineral impurities, and corrosion. To further reduce the cost of carbon capture, in addition to the large-scale deployment of oxyfuel technology, increasing interest is anticipated in the novel and next-generation oxyfuel combustion technologies that are briefly introduced here, including a new oxygen-production concept and flameless oxyfuel combustion.

  3. Spray cooling heat transfer: Technology overview and assessment of future challenges for micro-gravity application

    International Nuclear Information System (INIS)

    Silk, Eric A.; Golliher, Eric L.; Paneer Selvam, R.

    2008-01-01

    Advanced on-board flight systems for future NASA space exploration programs consist of components such as laser-diode arrays (LDA's) and multi-chip modules (MCM's). Thermal management of these systems require high heat flux cooling capability (≥100 W/cm 2 ), tight temperature control (approx. ±2 deg. C), reliable start-up (on demand) and long term stability. Traditional multiphase thermal control technologies for space flight (e.g., loop heat pipes, capillary pumped loops, etc.) satisfy the temperature control, start-up and stability requirements, but their heat flux removal capabilities are limited. Spray cooling can provide high heat fluxes in excess of 100 W/cm 2 using fluorinerts and over 1000 W/cm 2 with water while allowing tight temperature control at low coolant fluid flow rates. Spray cooling has been flight proven in an open loop configuration through the Space shuttle's flash evaporator system (FES). However, several closed system issues require investigation to further advance the technology to a technology readiness level (TRL) appropriate for closed system space flight application. This paper provides a discussion of the current status of spray cooling technology as well as NASA's goals, current direction, and challenges associated with the implementation and practice of this technology in the micro-gravity environment

  4. Trends, Opportunities, and Challenges for Tall Wind Turbine and Tower Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, Eric; Roberts, Owen; Dykes, Katherine

    2017-06-28

    This presentation summarizes recent analysis focused on characterizing the opportunity for Tall Wind technologies generally and for tall tower technologies specifically. It seeks to illuminate and explain the concept of Tall Wind, its impact on the wind industry to date, and the potential value of Tall Wind in the future. It also explores the conditions and locations under which the impacts of Tall Wind offer the most significant potential to increase wind technology performance. In addition, it seeks to examine the status of tall tower technology as a key sub-component of Tall Wind, focusing on the potential for continued innovation in tubular steel wind turbine towers and the status and potential for a select set of alternative tall tower technologies.

  5. [Brazilian technological output in the area of nursing: advances and challenges].

    Science.gov (United States)

    Koerich, Micheline Henrique Araujo da Luz; Vieira, Raquel Heloisa Guedes; Silva, Daniela Eda; Erdmann, Alacoque Lorenzini; Meirelles, Betina Horner Shlindwein

    2011-12-01

    This article aims to analyze the patents registered in the nursing area, since these patents may be used as an indicator of the technological development in the area. It presents and discusses national technological productions, tracked through the "nursing" keyword, patented in the period from 1990-2009. This is a retrospective documental research, using, as a source, data from the National Industrial Property Institute (INPI). The information gathered is discussed in relation to the appropriation of the technologies, the incentive to develop them and register them as a source of knowledge in the nursing field, aiming the practice of care. Light and light hard technology productions are increasing in the nursing field. However, these are not registered and patented. The technological advance in the nursing field is emergent and needs policies for its development.

  6. Medical education for rural areas: Opportunities and challenges for information and communications technologies

    Directory of Open Access Journals (Sweden)

    Sargeant Joan

    2005-01-01

    Full Text Available Resources in medical education are not evenly distributed and access to education can be more problematic in rural areas. Similar to telemedicine′s positive influence on health care access, advances in information and communications technologies (ICTs increase opportunities for medical education. This paper provides a descriptive overview of the use of ICTs in medical education and suggests a conceptual model for reviewing ICT use in medical education, describes specific ICTs and educational interventions, and discusses opportunities and challenges of ICT use, especially in rural areas. The literature review included technology and medical education, 1996-2005. Using an educational model as a framework, the uses of ICTs in medical education are, very generally, to link learners, instructors, specific course materials and/or information resources in various ways. ICTs range from the simple (telephone, audio-conferencing to the sophisticated (virtual environments, learning repositories and can increase access to medical education and enhance learning and collaboration for learners at all levels and for institutions. While ICTs are being used and offer further potential for medical education enhancement, challenges exist, especially for rural areas. These are technological (e.g., overcoming barriers like cost, maintenance, access to telecommunications infrastructure, educational (using ICTs to best meet learners′ educational priorities, integrating ICTs into educational programs and social (sensitivity to remote needs, resources, cultures. Finally, there is need for more rigorous research to more clearly identify advantages and disadvantages of specific uses of ICTs in medical education.

  7. Challenges and opportunities of microbial fuel cells (MFCs technology development in Indonesia

    Directory of Open Access Journals (Sweden)

    Surya Ramadan Bimastyaji

    2017-01-01

    Full Text Available Indonesian government has committed to realize the goals of sustainable development in the field of energy as stipulated in Government Regulation Number 79/2014 on national energy policy. A feasibility study of the utilization of alternative energy is important for developing countries like Indonesia. It is expected to reduce dependence on fossil fuel use and meet the energy needs on rural areas in Indonesia. Microbial fuel cells (MFCs is a potential source of electrical energy from waste that is rich in organic matter. Trends in research and development of Microbial Fuel Cells (MFCs technology are increasing every year due to great opportunity to address a wide range of issues related to renewable energy needs, restoration of contaminated environment, water treatment electricity generators in remote areas and many more. MFCs can be used to treat domestic waste, biomass, algae, landfill leachate, agricultural runoff, and industrial waste. MFCs technology is a technology solution for cheap, fast, simple. MFCs use of technical challenges including low electricity production, current instability, and high internal resistance. Many challenges must be address, including a more detailed analysis in energy production, consumption, and application, understanding the relationship between the amount of electricity and contaminant removal, promoting the elimination of nutrients and optimizing system configuration and operations.

  8. Testimony presented to the House Science and Technology Committee, 18 June 1981, Washington, DC

    International Nuclear Information System (INIS)

    Richmond, C.R.

    1981-10-01

    This report is the text of invited testimony given by the author before the House Science and Technology Committee. This Congressional hearing on Societal Risks of Energy Systems reflects the growing interest on the part of Congress, the public, the scientific community, and other groups on this extremely important topic of Risk Analysis. This presentation will contain information on the emergence of an interdisciplinary professional field of risk analysis, including the recently formed Society for Risk Analysis. I will also discuss in some detail various risk analysis programs now in progress at the Oak Ridge National Laboratory and other research institutions. Also included will be some general philosophy concerning risks from energy-producing systems and my perspective on the needs for further developments in the field of risk analysis

  9. Present status of development of alternative energy technology from environment protection point of view

    International Nuclear Information System (INIS)

    Tanaka, T.

    1992-01-01

    This paper reports that Japan lacks fossil fuel resources. Consequently, almost all fossil fuels are imported from abroad. Therefore, change in international affairs affects on Japan's politics and social life, as learned from experience of economic social life, as learned from experience of economic confusion caused by the oil crisis of 1973. For this reason, research and development (R and D) of alternative energy technologies was initiated in July 1974, which was promoted as one of national energy development programs called Sunshine Project. Presently, their technical developments are being continued to put practical use under this project. However, Japan's dependency of primary energy resources on oil is still high among major advanced countries and energy supply structure is significantly weak. Furthermore, from indetermination of the recent political condition in the Middle East, the importance of security against supply and demand of petroleum in middle and long term is generally recognized with the increasing cost of oil

  10. Experience in presenting short courses in waste management technologies for secondary science and mathematics teachers

    International Nuclear Information System (INIS)

    Toth, W.J.; Smith, T.H.; Garcia, M.M.; Ferguson, J.E.

    1991-01-01

    The Department of Energy (DOE) and its Idaho National Engineering Laboratory (INEL) are developing educational programs that will help avert projected shortages in scientific and engineering manpower. One approach to this end is to help teachers become better prepared to teach topics that enthuse more students. INEL developed and offered a Short Course in Waste Management Technologies for Secondary Science and Mathematics Teachers. Short Course has two purposes: (1) to provide secondary-level science and mathematics teachers with training and information that will be useful to them in the classroom, and (2) to provide information on a topic of widespread interest in today's society, i.e., the management of hazardous and radioactive wastes and the restoration and preservation of the environment. This paper describes the development of the Short Course and summarizes some of the lessons learned in the preparation and presentation of such courses. 2 refs., 2 tabs

  11. Development of Cryogenic Engine for GSLV MkIII: Technological Challenges

    Science.gov (United States)

    Praveen, RS; Jayan, N.; Bijukumar, KS; Jayaprakash, J.; Narayanan, V.; Ayyappan, G.

    2017-02-01

    Cryogenic engine capable of delivering 200 kN thrust is being developed for the first time in the country by ISRO for powering the upper stage of GSLV Mk-III, the next generation launch vehicle of ISRO capable of launching four tonne class satellites to Geo-synchronous Transfer Orbit(GTO). Development of this engine started a decade ago when various sub-systems development and testing were taken up. Starting with injector element development, the design, realization and testing of the major sub-systems viz the gas generator, turbopumps, start-up system and thrust chamber have been successfully done in a phased manner before conducting a series of developmental tests in the integrated engine mode. Apart from the major sub-systems, many critical components like the igniter, control components etc were independently developed and qualified. During the development program many challenges were faced in almost all areas of propulsion engineering. Systems engineering of the engine was another key challenge in the realization. This paper gives an outlook on various technological challenges faced in the key areas related to the engine development, insight to the solutions and measures taken to overcome the challenges.

  12. Zero Effort Technologies Considerations, Challenges, and Use in Health, Wellness, and Rehabilitation

    CERN Document Server

    Mihailidis, Alex; Hoey, Jesse

    2011-01-01

    This book introduces zero-effort technologies (ZETs), an emerging class of technology that requires little or no effort from the people who use it. ZETs use advanced techniques, such as computer vision, sensor fusion, decision-making and planning, and machine learning to autonomously operate through the collection, analysis, and application of data about the user and his/her context. This book gives an overview of ZETs, presents concepts in the development of pervasive intelligent technologies and environments for health and rehabilitation, along with an in-depth discussion of the design princ

  13. Science and technology in business management: Challenges for the training of professionals

    Directory of Open Access Journals (Sweden)

    Carlos Fernando Giler-Zúñiga

    2016-09-01

    Full Text Available The advances that are operated in science and technology at preset has been of accelerated changes, that lead to the analysis of the need of professionals{ training to face since the enterprise practice the challenges that contemporary innovation impose about knowledge, it is obliging education to assume different challenges. The professional training of professional correctly prepared, with the aim of contributing to the development of the country, it link it with economical politic and the a wider social politic ,thus, as with the systems of production and management, it pretends to give a new approach which is: to train to make capable of ,to specialize and update students and professionals to prepare a professional and leaders with critical thought and social  intellectual and of social goods and service and consciousness ,that link him with the principle of belonging being this the responsibility with preparation and training ,at the service of the an aesthetic politics of the society.

  14. Membrane-based processes for wastewater nutrient recovery: Technology, challenges, and future direction.

    Science.gov (United States)

    Xie, Ming; Shon, Ho Kyong; Gray, Stephen R; Elimelech, Menachem

    2016-02-01

    Wastewater nutrient recovery holds promise for more sustainable water and agricultural industries. We critically review three emerging membrane processes - forward osmosis (FO), membrane distillation (MD) and electrodialysis (ED) - that can advance wastewater nutrient recovery. Challenges associated with wastewater nutrient recovery were identified. The advantages and challenges of applying FO, MD, and ED technologies to wastewater nutrient recovery are discussed, and directions for future research and development are identified. Emphasis is given to exploration of the unique mass transfer properties of these membrane processes in the context of wastewater nutrient recovery. We highlight that hybridising these membrane processes with existing nutrient precipitation process will lead to better management of and more diverse pathways for near complete nutrient recovery in wastewater treatment facilities. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. International conference on fast reactors and related fuel cycles (FR09): Challenges and opportunities. CN-176 presentations

    International Nuclear Information System (INIS)

    2009-01-01

    and development, as well as in design, has not been reported in a coordinated manner, which has made planning and implementation of expensive research and technology development programmes rather difficult. There is a perceived need for an appropriate forum to achieve the twin objectives of exchanging experience and innovative ideas among experts, and of sharing knowledge and mentoring, whereby experienced scientists and technologists, as well as fast reactor programme managers, would share their perspectives with the future generation of young scientists and technologists, helping them to choose research problems of eminence and pursue their careers to meet the challenges of the development of fast reactors with recycle. After almost 20 years, this is also the appropriate time, as fast reactor programmes are currently on an accelerated growth path in many countries of the world. It is in light of this that the IAEA convened on 7-11 December 2009 in Kyoto, Japan, the International Conference on 'Fast Reactors and Related Fuel Cycles - Challenges and Opportunities (FR09)', hosted by the Japan Atomic Energy Agency. This conference aimed at promoting the exchange of information on national and multinational programmes and new developments and experience, with the goal of identifying and critically reviewing problems of importance, and stimulating and facilitating cooperation, development and successful deployment of fast reactors in an expeditious manner

  16. Geographic Medical History: Advances in Geospatial Technology Present New Potentials in Medical Practice

    Science.gov (United States)

    Faruque, F. S.; Finley, R. W.

    2016-06-01

    Genes, behaviour, and the environment are known to be the major risk factors for common diseases. When the patient visits a physician, typical questions include family history (genes) and lifestyle of the patient (behaviour), but questions concerning environmental risk factors often remain unasked. It is ironic that 25 centuries ago Hippocrates, known as the father of medicine, noted the importance of environmental exposure in medical investigation as documented in his classic work, "Airs, Waters, Places", yet the practice of routinely incorporating environmental risk factors is still not in place. Modern epigenetic studies have found that unhealthy lifestyle and environmental factors can cause changes to our genes that can increase disease risk factors. Therefore, attempting to solve the puzzle of diseases using heredity and lifestyle alone will be incomplete without accounting for the environmental exposures. The primary reason why environmental exposure has not yet been a routine part of the patient's medical history is mostly due to our inability to provide clinicians useful measures of environmental exposures suitable for their clinical practices. This presentation will discuss advances in geospatial technology that show the potential to catalyse a paradigm shift in medical practice and health research by allowing environmental risk factors to be documented as the patient's "Geographic Medical History". In order to accomplish this we need information on: a) relevant spatiotemporal environmental variables, and b) location of the individual in that person's dynamic environment. Common environmental agents that are known to interact with genetic make-up include air pollutants, mold spores, pesticides, etc. Until recently, the other component, location of an individual was limited to a static representation such as residential or workplace location. Now, with the development of mobile technology, changes in an individual's location can be tracked in real time if

  17. GEOGRAPHIC MEDICAL HISTORY: ADVANCES IN GEOSPATIAL TECHNOLOGY PRESENT NEW POTENTIALS IN MEDICAL PRACTICE

    Directory of Open Access Journals (Sweden)

    F. S. Faruque

    2016-06-01

    Full Text Available Genes, behaviour, and the environment are known to be the major risk factors for common diseases. When the patient visits a physician, typical questions include family history (genes and lifestyle of the patient (behaviour, but questions concerning environmental risk factors often remain unasked. It is ironic that 25 centuries ago Hippocrates, known as the father of medicine, noted the importance of environmental exposure in medical investigation as documented in his classic work, “Airs, Waters, Places”, yet the practice of routinely incorporating environmental risk factors is still not in place. Modern epigenetic studies have found that unhealthy lifestyle and environmental factors can cause changes to our genes that can increase disease risk factors. Therefore, attempting to solve the puzzle of diseases using heredity and lifestyle alone will be incomplete without accounting for the environmental exposures. The primary reason why environmental exposure has not yet been a routine part of the patient’s medical history is mostly due to our inability to provide clinicians useful measures of environmental exposures suitable for their clinical practices. This presentation will discuss advances in geospatial technology that show the potential to catalyse a paradigm shift in medical practice and health research by allowing environmental risk factors to be documented as the patient’s “Geographic Medical History”. In order to accomplish this we need information on: a relevant spatiotemporal environmental variables, and b location of the individual in that person’s dynamic environment. Common environmental agents that are known to interact with genetic make-up include air pollutants, mold spores, pesticides, etc. Until recently, the other component, location of an individual was limited to a static representation such as residential or workplace location. Now, with the development of mobile technology, changes in an individual’s location

  18. Technology Assessment and High-Speed Trains: facing the challenge of emergent digital society

    OpenAIRE

    Moretto, Susana Cristina dos Santos Gomes Martins

    2017-01-01

    The present PhD dissertation addresses the extension of selective environments of new technologies within the high-speed train technological system from business and regulations to the wider society. And, it argues the recognition of society as an actor in that system. Motivating it is the observed ever increase exposure of high-speed trains to public acceptance, caused by empowered society from fast ICT advancements. They refer to digitalization - the rise of social media and big data, co...

  19. Identification of Chinese Herbal Medicines with Electronic Nose Technology: Applications and Challenges

    Directory of Open Access Journals (Sweden)

    Huaying Zhou

    2017-05-01

    Full Text Available This paper provides a review of the most recent works in machine olfaction as applied to the identification of Chinese Herbal Medicines (CHMs. Due to the wide variety of CHMs, the complexity of growing sources and the diverse specifications of herb components, the quality control of CHMs is a challenging issue. Much research has demonstrated that an electronic nose (E-nose as an advanced machine olfaction system, can overcome this challenge through identification of the complex odors of CHMs. E-nose technology, with better usability, high sensitivity, real-time detection and non-destructive features has shown better performance in comparison with other analytical techniques such as gas chromatography-mass spectrometry (GC-MS. Although there has been immense development of E-nose techniques in other applications, there are limited reports on the application of E-noses for the quality control of CHMs. The aim of current study is to review practical implementation and advantages of E-noses for robust and effective odor identification of CHMs. It covers the use of E-nose technology to study the effects of growing regions, identification methods, production procedures and storage time on CHMs. Moreover, the challenges and applications of E-nose for CHM identification are investigated. Based on the advancement in E-nose technology, odor may become a new quantitative index for quality control of CHMs and drug discovery. It was also found that more research could be done in the area of odor standardization and odor reproduction for remote sensing.

  20. Identification of Chinese Herbal Medicines with Electronic Nose Technology: Applications and Challenges.

    Science.gov (United States)

    Zhou, Huaying; Luo, Dehan; GholamHosseini, Hamid; Li, Zhong; He, Jiafeng

    2017-05-09

    This paper provides a review of the most recent works in machine olfaction as applied to the identification of Chinese Herbal Medicines (CHMs). Due to the wide variety of CHMs, the complexity of growing sources and the diverse specifications of herb components, the quality control of CHMs is a challenging issue. Much research has demonstrated that an electronic nose (E-nose) as an advanced machine olfaction system, can overcome this challenge through identification of the complex odors of CHMs. E-nose technology, with better usability, high sensitivity, real-time detection and non-destructive features has shown better performance in comparison with other analytical techniques such as gas chromatography-mass spectrometry (GC-MS). Although there has been immense development of E-nose techniques in other applications, there are limited reports on the application of E-noses for the quality control of CHMs. The aim of current study is to review practical implementation and advantages of E-noses for robust and effective odor identification of CHMs. It covers the use of E-nose technology to study the effects of growing regions, identification methods, production procedures and storage time on CHMs. Moreover, the challenges and applications of E-nose for CHM identification are investigated. Based on the advancement in E-nose technology, odor may become a new quantitative index for quality control of CHMs and drug discovery. It was also found that more research could be done in the area of odor standardization and odor reproduction for remote sensing.