WorldWideScience

Sample records for technological areas covered

  1. Allegheny County Land Cover Areas

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Land Cover dataset demarcates 14 land cover types by area; such as Residential, Commercial, Industrial, Forest, Agriculture, etc. If viewing this description on...

  2. Tree cover changes in- and ouside protected areas in China

    DEFF Research Database (Denmark)

    Nüchel, Jonas; Bøcher, Peder Klith; Svenning, J.-C.

    the PAs, but they did not differ significantly from the tree cover change in the buffer zones. The average mean tree cover change for the PAs was 2.69 % and for the buffer zones was it 2.73 %. In addition, we link tree cover changes to the Human Influence Index and tested if there were a correlation......) Does the efficiency of the PAs depend on general human pressures in the region? We used a paired t-test to investigate if there was a significant change in tree cover between the protected areas and the 10-km zones surrounding them. There were both negative and positive tree cover changes inside...

  3. [Characteristics of chemical pollution of snow cover in Aktobe areas].

    Science.gov (United States)

    Iskakov, A Zh

    2010-01-01

    The paper gives data on the nature of snow cover pollution in the urbanized areas in relation to the remoteness from the basic sources of ambient air pollution. The total snow content of carcinogens has been estimated.

  4. Defense Technology Area Plan.

    Science.gov (United States)

    1996-05-01

    evacuation , missile defense, reconnaissance and surveillance, sea lane control, search and rescue, special operations, strategic and theater airlift...decontamination technology advances. Recently, novel types of polymeric support termed “ starburst ” dendrimer polymers have been developed. The ability to...threats • Optimize military performance; survival and stabilization of combat casualties • Provide the world’s best casualty evacuation and medical

  5. Innovation investment area: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

  6. Plutonium focus area: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this approach, EM developed a management structure and principles that led to creation of specific focus areas. These organizations were designed to focus scientific and technical talent throughout DOE and the national scientific community on major environmental restoration and waste management problems facing DOE. The focus area approach provides the framework for inter-site cooperation and leveraging of resources on common problems. After the original establishment of five major focus areas within the Office of Technology Development (EM-50), the Nuclear Materials Stabilization Task Group (NMSTG, EM-66) followed EM-50`s structure and chartered the Plutonium Focus Area (PFA). NMSTG`s charter to the PFA, described in detail later in this book, plays a major role in meeting the EM-66 commitments to the Defense Nuclear Facilities Safety Board (DNFSB). The PFA is a new program for FY96 and as such, the primary focus of revision 0 of this Technology Summary is an introduction to the Focus Area; its history, development, and management structure, including summaries of selected technologies being developed. Revision 1 to the Plutonium Focus Area Technology Summary is slated to include details on all technologies being developed, and is currently planned for release in August 1996. The following report outlines the scope and mission of the Office of Environmental Management, EM-60, and EM-66 organizations as related to the PFA organizational structure.

  7. Plutonium focus area: Technology summary

    International Nuclear Information System (INIS)

    1996-03-01

    To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this approach, EM developed a management structure and principles that led to creation of specific focus areas. These organizations were designed to focus scientific and technical talent throughout DOE and the national scientific community on major environmental restoration and waste management problems facing DOE. The focus area approach provides the framework for inter-site cooperation and leveraging of resources on common problems. After the original establishment of five major focus areas within the Office of Technology Development (EM-50), the Nuclear Materials Stabilization Task Group (NMSTG, EM-66) followed EM-50's structure and chartered the Plutonium Focus Area (PFA). NMSTG's charter to the PFA, described in detail later in this book, plays a major role in meeting the EM-66 commitments to the Defense Nuclear Facilities Safety Board (DNFSB). The PFA is a new program for FY96 and as such, the primary focus of revision 0 of this Technology Summary is an introduction to the Focus Area; its history, development, and management structure, including summaries of selected technologies being developed. Revision 1 to the Plutonium Focus Area Technology Summary is slated to include details on all technologies being developed, and is currently planned for release in August 1996. The following report outlines the scope and mission of the Office of Environmental Management, EM-60, and EM-66 organizations as related to the PFA organizational structure

  8. Innovation investment area: Technology summary

    International Nuclear Information System (INIS)

    1994-03-01

    The mission of Environmental Management's (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area's (IIA) two program elements: RDDT ampersand E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation

  9. A reconstruction of global agricultural areas and land cover for the last millennium

    Science.gov (United States)

    Pongratz, J.; Reick, C.; Raddatz, T.; Claussen, M.

    2008-09-01

    Humans have substantially modified the Earth's land cover, especially by transforming natural ecosystems to agricultural areas. In preindustrial times, the expansion of agriculture was probably the dominant process by which humankind altered the Earth system, but little is known about its extent, timing, and spatial pattern. This study presents an approach to reconstruct spatially explicit changes in global agricultural areas (cropland and pasture) and the resulting changes in land cover over the last millennium. The reconstruction is based on published maps of agricultural areas for the last three centuries. For earlier times, a country-based method is developed that uses population data as a proxy for agricultural activity. With this approach, the extent of cropland and pasture is consistently estimated since AD 800. The resulting reconstruction of agricultural areas is combined with a map of potential vegetation to estimate the resulting historical changes in land cover. Uncertainties associated with this approach, in particular owing to technological progress in agriculture and uncertainties in population estimates, are quantified. About 5 million km2 of natural vegetation are found to be transformed to agriculture between AD 800 and 1700, slightly more to cropland (mainly at the expense of forested area) than to pasture (mainly at the expense of natural grasslands). Historical events such as the Black Death in Europe led to considerable dynamics in land cover change on a regional scale. The reconstruction can be used with global climate and ecosystem models to assess the impact of human activities on the Earth system in preindustrial times.

  10. Technology trends in selected areas

    International Nuclear Information System (INIS)

    Mason, R.

    1990-01-01

    Besides the issues of international consequences of science and technology developments (including information technology, biotechnology, materials technology, nuclear technology, space technology) the following topics were touched only briefly: energy and uses of nuclear power, environmental issues, and matters such as the comprehensive test-ban treaty and the way ahead -more perhaps a phased approach than a single step. The limited time available did not allow considering the role of the United Nations and any other institutional forms in these matters. There is conviction that there was enough historical evidence to suggest that there will be a need for a plurality of institutions, with different geographical, and maybe even political, imperatives. In summary, a conference such as this one at Sendai can offer the United Nations advice on the dynamics of change in sectors of science and technology, of the impact of such changes on matters related to international security - military, economic and the environment. There is belief in the maximum diffusion of science and technology with the minimum discrimination but at the same time dissemination consistent with international security. The value of co-operative efforts in research and development, in the removal of asymmetries in the international system. The removal of such asymmetries would constitute a significant step on the way ahead, to a more just and lasting equilibrium between States

  11. Urban land use and land cover change analysis and modeling a case study area Malatya, Turkey

    OpenAIRE

    Baysal, Gülendam

    2013-01-01

    Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies. This research was conducted to analyze the land use and land cover changes and to model the changes for the case study area Malatya, Turkey. The first step of the study was acquisition of multi temporal data in order to detect the changes over the time. For this purpose satellite images (Landsat 1990-2000-2010) have been used. In order to acquire data from satel...

  12. Comparing Minnesota land cover/use area estimates using NRI and FIA data

    Science.gov (United States)

    Veronica C. Lessard; Mark H. Hansen; Mark D. Nelson

    2002-01-01

    Areas for land cover/use categories on non-Federal land in Minnesota were estimated from Forest Inventory and Analysis (FIA) data and National Resources Inventory (NRI) data. Six common land cover/use categories were defined, and the NRI and FIA land cover/use categories were assigned to them. Area estimates for these categories were calculated from the FIA and NRI...

  13. Application of Georadar in Areas with Different Vegetation Cover

    Directory of Open Access Journals (Sweden)

    Fernando Silva Coutinho

    2017-05-01

    Full Text Available ABSTRACT The Atlantic Forest degradation and fragmentation imposes the need for soil and vegetation assessments in order to estimate the environmental vulnerability of the remnants. The objective of this study was to evaluate the georadar applications in areas of Atlantic Forest under different forms of use in Pinheiral, State of Rio de Janeiro, Brazil, through penetrometer impact and ground penetrating radar (GPR. Forest fragments at different stages of regeneration, and pasture and agriculture (perennial and annual areas were selected for study. Soil characterization was performed through measurements of soil resistance to penetration (SRP with an impact penetrometer, and the soil properties with a ground penetrating radar (georadar. SRP increased in the forest areas at initial, medium and advanced stages from 2.0 to 2.5, 2.0 to 3.0 and 2.5 to 6.0 MPa, respectively. In the perennial and annual agriculture areas, the increase in SRP was due to differences in their mineral composition, and the lowest values found in the annual agriculture area were due to fauna activity. The employment of GPR generated information in a more rapid manner than with the use of impact penetrometer.

  14. Solar energy development impacts on land cover change and protected areas

    Science.gov (United States)

    Hernandez, Rebecca R.; Hoffacker, Madison K.; Murphy-Mariscal, Michelle L.; Wu, Grace C.; Allen, Michael F.

    2015-01-01

    Decisions determining the use of land for energy are of exigent concern as land scarcity, the need for ecosystem services, and demands for energy generation have concomitantly increased globally. Utility-scale solar energy (USSE) [i.e., ≥1 megawatt (MW)] development requires large quantities of space and land; however, studies quantifying the effect of USSE on land cover change and protected areas are limited. We assessed siting impacts of >160 USSE installations by technology type [photovoltaic (PV) vs. concentrating solar power (CSP)], area (in square kilometers), and capacity (in MW) within the global solar hot spot of the state of California (United States). Additionally, we used the Carnegie Energy and Environmental Compatibility model, a multiple criteria model, to quantify each installation according to environmental and technical compatibility. Last, we evaluated installations according to their proximity to protected areas, including inventoried roadless areas, endangered and threatened species habitat, and federally protected areas. We found the plurality of USSE (6,995 MW) in California is sited in shrublands and scrublands, comprising 375 km2 of land cover change. Twenty-eight percent of USSE installations are located in croplands and pastures, comprising 155 km2 of change. Less than 15% of USSE installations are sited in “Compatible” areas. The majority of “Incompatible” USSE power plants are sited far from existing transmission infrastructure, and all USSE installations average at most 7 and 5 km from protected areas, for PV and CSP, respectively. Where energy, food, and conservation goals intersect, environmental compatibility can be achieved when resource opportunities, constraints, and trade-offs are integrated into siting decisions. PMID:26483467

  15. Solar energy development impacts on land cover change and protected areas.

    Science.gov (United States)

    Hernandez, Rebecca R; Hoffacker, Madison K; Murphy-Mariscal, Michelle L; Wu, Grace C; Allen, Michael F

    2015-11-03

    Decisions determining the use of land for energy are of exigent concern as land scarcity, the need for ecosystem services, and demands for energy generation have concomitantly increased globally. Utility-scale solar energy (USSE) [i.e., ≥ 1 megawatt (MW)] development requires large quantities of space and land; however, studies quantifying the effect of USSE on land cover change and protected areas are limited. We assessed siting impacts of >160 USSE installations by technology type [photovoltaic (PV) vs. concentrating solar power (CSP)], area (in square kilometers), and capacity (in MW) within the global solar hot spot of the state of California (United States). Additionally, we used the Carnegie Energy and Environmental Compatibility model, a multiple criteria model, to quantify each installation according to environmental and technical compatibility. Last, we evaluated installations according to their proximity to protected areas, including inventoried roadless areas, endangered and threatened species habitat, and federally protected areas. We found the plurality of USSE (6,995 MW) in California is sited in shrublands and scrublands, comprising 375 km(2) of land cover change. Twenty-eight percent of USSE installations are located in croplands and pastures, comprising 155 km(2) of change. Less than 15% of USSE installations are sited in "Compatible" areas. The majority of "Incompatible" USSE power plants are sited far from existing transmission infrastructure, and all USSE installations average at most 7 and 5 km from protected areas, for PV and CSP, respectively. Where energy, food, and conservation goals intersect, environmental compatibility can be achieved when resource opportunities, constraints, and trade-offs are integrated into siting decisions.

  16. Solar Energy Development Impacts on Land-Cover Change and Protected Areas

    Science.gov (United States)

    Hoffacker, M. K.; Hernandez, R. R.; Murphy-Mariscal, M. L.; Wu, G. C.; Allen, M. F.

    2015-12-01

    Decisions determining the use of land for energy are of exigent concern as land scarcity, the need for ecosystem services, and demands for energy generation have concomitantly increased globally. Utility-scale solar energy (USSE; i.e., ≥ 1 megawatt [MW]) development requires large quantities of space and land; however, studies quantifying the effect of USSE on land-cover change and protected areas are limited. We assessed siting impacts of >160 USSE installations by technology type (photovoltaic [PV] vs. concentrating solar power [CSP]), area (km2), and capacity (MW) within the global solar hotspot of the state of California (USA). Additionally, we utilized the Carnegie Energy and Environmental Compatibility Model, a multiple criteria model, to quantify each installation according to environmental and technical compatibility. Lastly, we evaluated installations according to their proximity to protected areas, including inventoried roadless areas, endangered and threatened species habitat, and federally protected areas. We found the plurality of USSE (6,995 MW) in California is sited in shrub- and scrublands, comprising 375 km2 of land-cover change. Twenty-eight percent of USSE installations are located in croplands and pastures, comprising 155 km2 of change. Less than 15% of USSE installations are sited in compatible areas. The majority of incompatible USSE power plants are sited far from existing transmission infrastructure and all USSE installations average at most seven and five km from protected areas, for PV and CSP, respectively. Where energy, food, and conservation goals intersect, environmental compatibility can be achieved when resource opportunities, constraints, and trade-offs are integrated into siting decisions.

  17. Agricultural land cover changes in metropolitan areas of Poland for the period 1990–2012

    Directory of Open Access Journals (Sweden)

    Nalej Marta

    2016-06-01

    Full Text Available Agricultural land covers more than half the area of metropolitan areas in Poland, and is therefore particularly prone to the influences of the processes associated with their development. The aim of the study was to analyse changes in agricultural land cover within the metropolitan areas of Poland for the years 1990–2012; and to capture their dynamics, types and directions. The percentage share of the total study area, for each of the forms of agricultural land cover and their changes were traced, with the spatial distribution of the changes also being determined. The results of the study show that in metropolitan areas, agricultural land cover is undergoing transformations that do not result in the loss of agricultural lands, or that involve a decrease in surface area due to their change into anthropogenic forms of land cover. The greatest transitions occurred between 2000 and 2006 and were observed in the outer zones of metropolitan areas.

  18. [Markov process of vegetation cover change in arid area of northwest China based on FVC index].

    Science.gov (United States)

    Wang, Zhi; Chang, Shun-li; Shi, Qing-dong; Ma, Ke; Liang, Feng-chao

    2010-05-01

    Based on the fractional vegetation cover (FVC) data of 1982-2000 NOAA/AVHRR (National Oceanic and Atmospheric Administration/ the Advanced Very High Resolution Radiometer) images, the whole arid area of Northwest China was divided into three sub-areas, and then, the vegetation cover in each sub-area was classified by altitude. Furthermore, the Markov process of vegetation cover change was analyzed and tested through calculating the limit probability of any two years and the continuous and interval mean transition matrixes of vegetation cover change with 8 km x 8 km spatial resolution. By this method, the Markov process of vegetation cover change and its indicative significance were approached. The results showed that the vegetation cover change in the study area was controlled by some random processes and affected by long-term stable driving factors, and the transitional change of vegetation cover was a multiple Markov process. Therefore, only using two term image data, no matter they were successive or intervallic, Markov process could not accurately estimate the trend of vegetation cover change. As for the arid area of Northwest China, more than 10 years successive data could basically reflect all the factors affecting regional vegetation cover change, and using long term average transition matrix data could reliably simulate and predict the vegetation cover change. Vegetation cover change was a long term dynamic balance. Once the balance was broken down, it should be a long time process to establish a new balance.

  19. Effectiveness of Africa's tropical protected areas for maintaining forest cover.

    Science.gov (United States)

    Bowker, J N; De Vos, A; Ament, J M; Cumming, G S

    2017-06-01

    The effectiveness of parks for forest conservation is widely debated in Africa, where increasing human pressure, insufficient funding, and lack of management capacity frequently place significant demands on forests. Tropical forests house a substantial portion of the world's remaining biodiversity and are heavily affected by anthropogenic activity. We analyzed park effectiveness at the individual (224 parks) and national (23 countries) level across Africa by comparing the extent of forest loss (as a proxy for deforestation) inside parks to matched unprotected control sites. Although significant geographical variation existed among parks, the majority of African parks had significantly less forest loss within their boundaries (e.g., Mahale Park had 34 times less forest loss within its boundary) than control sites. Accessibility was a significant driver of forest loss. Relatively inaccessible areas had a higher probability (odds ratio >1, p < 0.001) of forest loss but only in ineffective parks, and relatively accessible areas had a higher probability of forest loss but only in effective parks. Smaller parks less effectively prevented forest loss inside park boundaries than larger parks (T = -2.32, p < 0.05), and older parks less effectively prevented forest loss inside park boundaries than younger parks (F 2,154 = -4.11, p < 0.001). Our analyses, the first individual and national assessment of park effectiveness across Africa, demonstrated the complexity of factors (such as geographical variation, accessibility, and park size and age) influencing the ability of a park to curb forest loss within its boundaries. © 2016 Society for Conservation Biology.

  20. Cover technology demonstration for low-level radioactive sites

    International Nuclear Information System (INIS)

    Barnes, F.J.; Warren, J.L.

    1988-01-01

    The performance of a shallow land burial site in isolating low-level radioactive and mixed waste is strongly influenced by the behavior of the precipitation falling on the site. Predicting the long-term integrity of a cover design requires a knowledge of the water balance dynamics, and the use of predictive models. The multiplicity of factors operating on a site in the years post-closure (precipitation intensity and duration, soil conditions, vegetation seasonality and variability) have made it extremely difficult to predict the effects of natural precipitation with accuracy. Preliminary results are presented on a three-year field demonstration at Los Alamos National Laboratory to evaluate the influence of different waste trench cap designs on water balance under natural precipitation. Erosion plots having two different vegetative covers (shrubs and grasses) and with either gravel-mulched or unmulched soil surface treatments have been established on three different soil profiles on an inactive waste site. Total runoff and soil loss from each plot are measured biweekly while plant canopy cover is measured seasonally. Preliminary results from the first year show that the application of a gravel mulch reduced runoff by 73 to 90%. Total soil loss was reduced by 83 to 93% by the mulch treatment. On unmulched plots, grass cover reduced both runoff and soil loss by about 50% compared to the shrub plots. Soil moisture reduction during the growing season was more pronounced on the shrub plots. This indicates that a more complex vegetative cover provides greater soil moisture storage capacity for winter precipitation than the usual grass cover

  1. Comparison results of forest cover mapping of Peninsular Malaysia using geospatial technology

    Science.gov (United States)

    Hamid, Wan Abdul; Abd Rahman, Shukri B. Wan

    2016-06-01

    Climate change and global warming transpire due to several factors. Among them is deforestation which occur mostly in developing countries including Malaysia where forested areas are converted to other land use for tangible economic returns and to a smaller extent, as subsistence for local communities. As a cause for concern, efforts have been taken by the World Resource Institute (WRI) and World Wildlife Fund (WWF) to monitor forest loss using geospatial technology - interpreting time-based remote sensing imageries and producing statistics of forested areas lost since 2001. In Peninsular Malaysia, the Forestry Department of Peninsular Malaysia(FDPM) has conducted forest cover mapping for the region using the same technology since 2011, producing GIS maps for 2009-2010,2011-2012,2013-2014 and 2015. This paper focuses on the comparative study of the results generated from WRI,WWF and FDPM interpretations between 2010 and 2015, the methodologies used, the similarities and differences, challenges and recommendations for future enhancement of forest cover mapping technique.

  2. Male Texas Horned Lizards increase daily movements and area covered in spring: A mate searching strategy?

    Science.gov (United States)

    Stark, Richard C.; Fox, S. F.; David, M.L.

    2005-01-01

    Texas Horned Lizards, Phrynosoma cornutum, were tracked using fluorescent powder to determine exact daily movements. Daily linear movements and daily space use were compared between adult males and females. Lizards that traveled the greatest linear distances also covered the largest areas. In Oklahoma, adults emerge from hibernation in late April and early May and mate soon afterward. Males traveled significantly greater distances (and covered significantly larger areas in a day) than females in May but not after May. We propose that males move more and cover more area than females early in the mating season to intercept receptive females. Copyright 2005 Society for the Study of Amphibians and Reptiles.

  3. Research on clay covering experiment in a abandoned uranium mining area

    International Nuclear Information System (INIS)

    Zhang Xueli; Xu Lechang; Zhang Wei

    2014-01-01

    The clay covering experiment was designed in a abandoned uranium mining area, including experiment principle, determining size of experimental site, experiment method, choosing cover materials and determining cover thickness. According to the experiment results, the relationship between the radon exhalation rate and cover thickness, the diffusion coefficient of radon in clay were fully discussed. Also, the corresponding function expressions were established. The linear correlation coefficient test results showed that the relationship between the radon exhalation rate and cover thickness was significantly correlated. According to the correlation function expression between the radon exhalation rate and the cover thickness, the cover thickness of the decommissioning sites can be determined, in order to provide a scientific basis for the design and environmental impact assessment on decommissioning disposal project of a uranium mine. (authors)

  4. Land cover in single-family housing areas and how it correlates with urban form

    DEFF Research Database (Denmark)

    Nielsen, Mette Boye; Jensen, Marina Bergen

    2015-01-01

    Land cover composition is a valuable indicator of the ecological performance of a city. Single-family housing areas constitute a substantial part of most cities and may as such play an important role for sustainable urban development. From aerial photos we performed detailed GIS-based mapping...... that the urban form of neighbourhoods to some degree predicts the long term land cover composition. We conclude that strategies for maximizing the ecological performance of single-family housing areas can be informed by knowledge on urban form, and that digital mapping of land cover based on aerial photography...... of land cover in three detached single-family housing areas in Denmark of different urban form but comparable housing densities (ranging from 10.0 to 11.3 houses per hectare). The findings were subjected to statistical analysis and landscape metrics. Land cover varied with urban form: A traditional...

  5. LBA-ECO LC-03 SAR Images, Land Cover, and Biomass, Four Areas across Brazilian Amazon

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: This data set provides three related land cover products for four study areas across the Brazilian Amazon: Manaus, Amazonas; Tapajos National Forest, Para...

  6. CLPX-Satellite: EO-1 Hyperion Surface Reflectance, Snow-Covered Area, and Grain Size

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set consists of apparent surface reflectance, subpixel snow-covered area and grain size collected from the Hyperion hyperspectral imager. The Hyperion...

  7. LBA-ECO LC-03 SAR Images, Land Cover, and Biomass, Four Areas across Brazilian Amazon

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set provides three related land cover products for four study areas across the Brazilian Amazon: Manaus, Amazonas; Tapajos National Forest, Para Western...

  8. Estimation of the spatiotemporal dynamics of snow covered area by using cellular automata models

    Science.gov (United States)

    Pardo-Igúzquiza, Eulogio; Collados-Lara, Antonio-Juan; Pulido-Velazquez, David

    2017-07-01

    Given the need to consider the cryosphere in water resources management for mountainous regions, the purpose of this paper is to model the daily spatially distributed dynamics of snow covered area (SCA) by using calibrated cellular automata models. For the operational use of the calibrated model, the only data requirements are the altitude of each cell of the spatial discretization of the area of interest and precipitation and temperature indexes for the area of interest. For the calibration step, experimental snow covered area data are needed. Potential uses of the model are to estimate the snow covered area when satellite data are absent, or when they provide a temporal resolution different from the operational resolution, or when the satellite images are useless because they are covered by clouds or because there has been a sensor failure. Another interesting application is the simulation of SCA dynamics for the snow covered area under future climatic scenarios. The model is applied to the Sierra Nevada mountain range, in southern Spain, which is home to significant biodiversity, contains important water resources in its snowpack, and contains the most meridional ski resort in Europe.

  9. Prioritizing Areas for Rehabilitation by Monitoring Change in Barangay-Based Vegetation Cover

    Directory of Open Access Journals (Sweden)

    Ria S. Estoque

    2012-03-01

    Full Text Available Analysis of spatial and temporal changes of vegetation cover using remote sensing (RS technology, in conjunction with Geographic Information Systems (GIS, is becoming increasingly important in environmental conservation. The objective of this study was to use RS data and GIS techniques to assess the vegetation cover in 1989 and 2009, in the barangays (smallest administrative units of the city of San Fernando, La Union, the Philippines, for planning vegetation rehabilitation. Landsat images were used to prepare both the 1989 and 2009 land cover maps, which were then used to detect changes in the vegetation cover for the barangays. In addition to conventional accuracy assessment parameters such as; proportion correct, and standard Kappa index of agreement, two other parameters; quantity, and allocation disagreements were used to assess the accuracy of the land cover classification. Results revealed that there were gains and losses of vegetation cover in most of the barangays, but overall vegetation cover increased by 11% (around 625 ha based on the original extent of 1989. Those barangays that showed substantial net losses in vegetation cover need to be prioritised for rehabilitation planning. As exemplified in this study, the collection, processing and analysis of relevant RS and GIS information, can facilitate priority-setting in the planning of environmental rehabilitation and conservation by the local government at both city and barangay levels.

  10. Simulation of Land-Cover Change in Taipei Metropolitan Area under Climate Change Impact

    International Nuclear Information System (INIS)

    Huang, Kuo-Ching; Huang, Thomas C C

    2014-01-01

    Climate change causes environment change and shows up on land covers. Through observing the change of land use, researchers can find out the trend and potential mechanism of the land cover change. Effective adaptation policies can affect pattern of land cover change and may decrease the risks of climate change impacts. By simulating land use dynamics with scenario settings, this paper attempts to explore the relationship between climate change and land-cover change through efficient adaptation polices. It involves spatial statistical model in estimating possibility of land-cover change, cellular automata model in modeling land-cover dynamics, and scenario analysis in response to adaptation polices. The results show that, without any control, the critical eco-areas, such as estuarine areas, will be destroyed and people may move to the vulnerable and important economic development areas. In the other hand, under the limited development condition for adaptation, people migration to peri-urban and critical eco-areas may be deterred

  11. Simulation of Land-Cover Change in Taipei Metropolitan Area under Climate Change Impact

    Science.gov (United States)

    Huang, Kuo-Ching; Huang, Thomas C. C.

    2014-02-01

    Climate change causes environment change and shows up on land covers. Through observing the change of land use, researchers can find out the trend and potential mechanism of the land cover change. Effective adaptation policies can affect pattern of land cover change and may decrease the risks of climate change impacts. By simulating land use dynamics with scenario settings, this paper attempts to explore the relationship between climate change and land-cover change through efficient adaptation polices. It involves spatial statistical model in estimating possibility of land-cover change, cellular automata model in modeling land-cover dynamics, and scenario analysis in response to adaptation polices. The results show that, without any control, the critical eco-areas, such as estuarine areas, will be destroyed and people may move to the vulnerable and important economic development areas. In the other hand, under the limited development condition for adaptation, people migration to peri-urban and critical eco-areas may be deterred.

  12. [Evaluation of pollution of an urban area by level of heavy metals in snow cover].

    Science.gov (United States)

    Stepanova, N V; Khamitova, R Ia; Petrova, R S

    2003-01-01

    The goal of this study was to systematize various methodological approaches to evaluating the contamination of the snow cover with heavy metals (HM) by using Kazan, an industrial city with diversified industry, as an example. The findings suggest that it is necessary to characterize the contamination of the snow cover by the actual entrance of an element per area unit of the snow cover for a definite period of time rather than by the concentration of TM in the volume unit of snow water (mg/l), which minimizes the uncertainties with spatial and temporary snow cover variations. The index of the maximum allowable entrance, which is of practical value, may be used to objectively calibrate the pollution of the snow cover, by estimating the amount of a coming element and its toxicity.

  13. A global map of supraglacial debris cover and recent debris area changes

    Science.gov (United States)

    Herreid, S.; Pellicciotti, F.

    2017-12-01

    The extent of supraglacial rock debris is both a first order indicator of the rock flux within a glacier system and an important term in glacier mass balance models where debris cover modulates the energy fluxes that reach the buried glacier ice surface. To date, no global debris cover inventory is available and most global models of glacier change do not include the effect of debris cover on mass balance. We have used Landsat data and glacier outlines from the Randolph Glacier Inventory v6.0 and PROMICE (Programme for Monitoring of the Greenland Ice Sheet) to generate a modern-date global inventory of debris cover at a spatial resolution of 30 m. For select locations around the Earth with high concentrations of glacier ice and suitable historical imagery, we have derived changes in debris-covered area. We present the heterogeneous pattern of debris cover on Earth which is the integrated signal from hundreds of years of rock debris accumulation and transportation through each glacier system. We further resolve this debris history by presenting recent changes in debris-covered area over the satellite era. Preliminary results from Southeast Alaska, USA, Baffin Island, Canada, Southeast Greenland, and the Eastern Himalaya, China all show an increase in debris-covered area over the past tens of years with heterogeneous rates of increase. This study provides a greater geomorphological understanding of glaciers, their surrounding environment and the flux of supraglacial debris at timescales of both hundreds and tens of years. These data also serve as an input dataset and/or an indicator pointing to locations where debris cover needs to be considered in glacier melt models.

  14. Predicting the presence and cover of management relevant invasive plant species on protected areas.

    Science.gov (United States)

    Iacona, Gwenllian; Price, Franklin D; Armsworth, Paul R

    2016-01-15

    Invasive species are a management concern on protected areas worldwide. Conservation managers need to predict infestations of invasive plants they aim to treat if they want to plan for long term management. Many studies predict the presence of invasive species, but predictions of cover are more relevant for management. Here we examined how predictors of invasive plant presence and cover differ across species that vary in their management priority. To do so, we used data on management effort and cover of invasive plant species on central Florida protected areas. Using a zero-inflated multiple regression framework, we showed that protected area features can predict the presence and cover of the focal species but the same features rarely explain both. There were several predictors of either presence or cover that were important across multiple species. Protected areas with three days of frost per year or fewer were more likely to have occurrences of four of the six focal species. When invasive plants were present, their proportional cover was greater on small preserves for all species, and varied with surrounding household density for three species. None of the predictive features were clearly related to whether species were prioritized for management or not. Our results suggest that predictors of cover and presence can differ both within and across species but do not covary with management priority. We conclude that conservation managers need to select predictors of invasion with care as species identity can determine the relationship between predictors of presence and the more management relevant predictors of cover. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Assessment of Performance for Alternative Cover Systems on a Waste Rock Storage Area

    Science.gov (United States)

    Argunhan, C.; Yazicigil, H.

    2015-12-01

    A cover is usually applied to the top of the mining wastes to prevent exposure of sulphide minerals in the waste to water and oxygen ingress in order to mitigate the unwanted consequences such as acid rock drainage. Hence, the selection and design of the appropriate cover system by considering the climatic conditions, local unsaturated and saturated properties and the availability of the cover materials become an important issue. This study aims to investigate the performance of various cover systems and designs for the North Waste Rock Storage Area in Kışladağ Gold Mine located in Uşak in Western Turkey. SEEP/W and VADOSE/W softwares are used to model the flow in unsaturated and saturated zones and to assess the performance of various cover systems. The soil water characteristics and parameters used in the model for saturated and unsaturated conditions were taken from field tests and literature. Accuracy of input data is checked during calibration for steady state conditions with SEEP/W. Then, bedrock, waste rock and cover alternatives are modeled under transient conditions for 20 years using daily climatic data. The effectiveness of the various cover systems for minimizing the ingress of water and air that cause acid rock drainage is evaluated and recommendations are made so that the impacts to groundwater from the waste rock storage areas during closure period are minimized.

  16. Optimization of the Area 5 Radioactive Waste Management Site Closure Cover

    International Nuclear Information System (INIS)

    Shott, Greg; Yucel, Vefa

    2009-01-01

    The U.S. Department of Energy Manual DOE M 435.1-1, 'Radioactive Waste Management Manual,' requires that performance assessments demonstrate that releases of radionuclides to the environment are as low as reasonably achievable (ALARA). Quantitative cost benefit analysis of radiation protection options is one component of the ALARA process. This report summarizes a quantitative cost benefit analysis of closure cover thickness for the Area 5 Radioactive Waste Management Site (RWMS) on the Nevada Test Site. The optimum cover thickness that maintains doses ALARA is shown to be the thickness with the minimum total closure cost. Total closure cost is the sum of cover construction cost and the health detriment cost. Cover construction cost is estimated based on detailed cost estimates for closure of the 92-acre Low-Level Waste Management Unit (LLWMU). The health detriment cost is calculated as the product of collective dose and a constant monetary value of health detriment in units of dollars per unit collective dose. Collective dose is the sum of all individual doses in an exposed population and has units of person-sievert (Sv). Five discrete cover thickness options ranging from 2.5 to 4.5 meters (m) (8.2 to 15 feet (ft)) are evaluated. The optimization was subject to the constraints that (1) options must meet all applicable regulatory requirements and that (2) individual doses be a small fraction of background radiation dose. Total closure cost is found to be a monotonically increasing function of cover thickness for the 92-ac LLWMU, the Northern Expansion Area, and the entire Area 5 RWMS. The cover construction cost is orders of magnitude greater than the health detriment cost. Two-thousand Latin hypercube sampling realizations of the relationship between total closure cost and cover thickness are generated. In every realization, the optimum cover thickness is 2.5 m (8.2 ft) for the 92-ac Low-Level Waste Management Unit, the Northern Expansion Area, and the entire Area

  17. Optimization of the Area 5 Radioactive Waste Management Site Closure Cover

    Energy Technology Data Exchange (ETDEWEB)

    Shott, Greg; Yucel, Vefa

    2009-04-01

    The U.S. Department of Energy Manual DOE M 435.1-1, “Radioactive Waste Management Manual,” requires that performance assessments demonstrate that releases of radionuclides to the environment are as low as reasonably achievable (ALARA). Quantitative cost benefit analysis of radiation protection options is one component of the ALARA process. This report summarizes a quantitative cost benefit analysis of closure cover thickness for the Area 5 Radioactive Waste Management Site (RWMS) on the Nevada Test Site. The optimum cover thickness that maintains doses ALARA is shown to be the thickness with the minimum total closure cost. Total closure cost is the sum of cover construction cost and the health detriment cost. Cover construction cost is estimated based on detailed cost estimates for closure of the 92-acre Low-Level Waste Management Unit (LLWMU). The health detriment cost is calculated as the product of collective dose and a constant monetary value of health detriment in units of dollars per unit collective dose. Collective dose is the sum of all individual doses in an exposed population and has units of person-sievert (Sv). Five discrete cover thickness options ranging from 2.5 to 4.5 meters (m) (8.2 to 15 feet [ft]) are evaluated. The optimization was subject to the constraints that (1) options must meet all applicable regulatory requirements and that (2) individual doses be a small fraction of background radiation dose. Total closure cost is found to be a monotonically increasing function of cover thickness for the 92-ac LLWMU, the Northern Expansion Area, and the entire Area 5 RWMS. The cover construction cost is orders of magnitude greater than the health detriment cost. Two-thousand Latin hypercube sampling realizations of the relationship between total closure cost and cover thickness are generated. In every realization, the optimum cover thickness is 2.5 m (8.2 ft) for the 92-ac Low-Level Waste Management Unit, the Northern Expansion Area, and the entire

  18. 77 FR 7095 - Transitional Program for Covered Business Method Patents-Definition of Technological Invention

    Science.gov (United States)

    2012-02-10

    ... upon either the patent failing to meet the proposed definition for technological invention or because... Patents-- Definition of Technological Invention AGENCY: United States Patent and Trademark Office... invention in a transitional post-grant review proceeding for covered business method patents. The provision...

  19. Landfill stabilization focus area: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Landfills within the DOE Complex as of 1990 are estimated to contain 3 million cubic meters of buried waste. The DOE facilities where the waste is predominantly located are at Hanford, the Savannah River Site (SRS), the Idaho National Engineering Laboratory (INEL), the Los Alamos National Laboratory (LANL), the Oak Ridge Reservation (ORR), the Nevada Test Site (NTS), and the Rocky Flats Plant (RFP). Landfills include buried waste, whether on pads or in trenches, sumps, ponds, pits, cribs, heaps and piles, auger holes, caissons, and sanitary landfills. Approximately half of all DOE buried waste was disposed of before 1970. Disposal regulations at that time permitted the commingling of various types of waste (i.e., transuranic, low-level radioactive, hazardous). As a result, much of the buried waste throughout the DOE Complex is presently believed to be contaminated with both hazardous and radioactive materials. DOE buried waste typically includes transuranic-contaminated radioactive waste (TRU), low-level radioactive waste (LLW), hazardous waste per 40 CFR 26 1, greater-than-class-C waste per CFR 61 55 (GTCC), mixed TRU waste, and mixed LLW. The mission of the Landfill Stabilization Focus Area is to develop, demonstrate, and deliver safer,more cost-effective and efficient technologies which satisfy DOE site needs for the remediation and management of landfills. The LSFA is structured into five technology areas to meet the landfill remediation and management needs across the DOE complex. These technology areas are: assessment, retrieval, treatment, containment, and stabilization. Technical tasks in each of these areas are reviewed.

  20. Landfill stabilization focus area: Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    Landfills within the DOE Complex as of 1990 are estimated to contain 3 million cubic meters of buried waste. The DOE facilities where the waste is predominantly located are at Hanford, the Savannah River Site (SRS), the Idaho National Engineering Laboratory (INEL), the Los Alamos National Laboratory (LANL), the Oak Ridge Reservation (ORR), the Nevada Test Site (NTS), and the Rocky Flats Plant (RFP). Landfills include buried waste, whether on pads or in trenches, sumps, ponds, pits, cribs, heaps and piles, auger holes, caissons, and sanitary landfills. Approximately half of all DOE buried waste was disposed of before 1970. Disposal regulations at that time permitted the commingling of various types of waste (i.e., transuranic, low-level radioactive, hazardous). As a result, much of the buried waste throughout the DOE Complex is presently believed to be contaminated with both hazardous and radioactive materials. DOE buried waste typically includes transuranic-contaminated radioactive waste (TRU), low-level radioactive waste (LLW), hazardous waste per 40 CFR 26 1, greater-than-class-C waste per CFR 61 55 (GTCC), mixed TRU waste, and mixed LLW. The mission of the Landfill Stabilization Focus Area is to develop, demonstrate, and deliver safer,more cost-effective and efficient technologies which satisfy DOE site needs for the remediation and management of landfills. The LSFA is structured into five technology areas to meet the landfill remediation and management needs across the DOE complex. These technology areas are: assessment, retrieval, treatment, containment, and stabilization. Technical tasks in each of these areas are reviewed

  1. Delineating Urban Fringe Area by Land Cover Information Entropy—An Empirical Study of Guangzhou-Foshan Metropolitan Area, China

    Directory of Open Access Journals (Sweden)

    Junyi Huang

    2016-05-01

    Full Text Available Rapid urbanization has caused many environmental problems, such as the heat island effect, intensifying air pollution, pollution from runoff, loss of wildlife habitat, etc. Accurate evaluations of these problems demand an accurate delineation of the spatial extent of the urban fringe. Conceptual and analytical ambiguity of the urban fringe and a general lack of consensus among researchers have made its measurement very difficult. This study reports a compound and reliable method to delineate the urban fringe area using a case study. Based on the 'fringe effect' theory in landscape ecology, the existing land cover information entropy model for defining the urban fringe is renewed by incorporating scale theory, cartography and urban geography theory. Results show that the urban fringe area of Guangzhou and Foshan metropolitan area covers an area of 2031 km2, and it occupies over 31% of the total study area. Result evaluation by industry structure data shows satisfactory correspondence with different land cover types. This paper reports the method and outcome of an attempt to provide an objective, repeatable and generally applicable method for mapping its spatial extent from remote sensing imageries, and could be beneficial to relevant urban studies and urban fringe management projects.

  2. Promoting exports in the energy technology area

    International Nuclear Information System (INIS)

    Iten, R.; Oettli, B.; Jochem, E.; Mannsbart, W.

    2001-01-01

    This report for the Swiss Federal Office of Energy (SFOE) examines the position of Switzerland as a leader in the investment goods markets for energy-efficiency products and for technologies for using renewable forms of energy. The report quotes figures for exports in these areas and discusses the difficulty of extracting useful data on these products from normal statistical data. Analyses made by a group of experts from the export-oriented technology field, energy service providers and representatives of export promotion institutions are presented and figures are quoted for various product categories. Factors promoting the competitiveness of Swiss products are discussed as well as those impeding it. An analysis of export potential is presented and measures to promote export are discussed. The report also discusses the aids and promotion activities that are considered necessary by companies in the field and the macro-economic perspectives of increased export promotion

  3. Mapping Rural Areas with Widespread Plastic Covered Vineyards Using True Color Aerial Data

    Directory of Open Access Journals (Sweden)

    Eufemia Tarantino

    2012-06-01

    Full Text Available Plastic covering is used worldwide to protect crops against damaging growing conditions. This agricultural practice raises some controversial issues. While it significantly impacts on local economic vitality, plasticulture also shows several environmental affects. In the Apulia Region (Italy the wide-spreading of artificial plastic coverings for vineyard protection has showed negative consequences on the hydrogeological balance of soils as well as on the visual quality of rural landscape. In order to monitor and manage this phenomenon, a detailed site mapping has become essential. In this study an efficient object-based classification procedure from Very High Spatial Resolution (VHSR true color aerial data was developed on eight test areas located in the Ionian area of the Apulia Region in order to support the updating of the existing land use database aimed at plastic covered vineyard monitoring.

  4. Spatial Feature Reconstruction of Cloud-Covered Areas in Daily MODIS Composites

    Directory of Open Access Journals (Sweden)

    Stephan Paul

    2015-04-01

    Full Text Available The opacity of clouds is the main problem for optical and thermal space-borne sensors, like the Moderate-Resolution Imaging Spectroradiometer (MODIS. Especially during polar nighttime, the low thermal contrast between clouds and the underlying snow/ice results in deficiencies of the MODIS cloud mask and affected products. There are different approaches to retrieve information about frequently cloud-covered areas, which often operate with large amounts of days aggregated into single composites for a long period of time. These approaches are well suited for static-nature, slow changing surface features (e.g., fast-ice extent. However, this is not applicable to fast-changing features, like sea-ice polynyas. Therefore, we developed a spatial feature reconstruction to derive information for cloud-covered sea-ice areas based on the surrounding days weighted directly proportional with their temporal proximity to the initial day of interest. Its performance is tested based on manually-screened and artificially cloud-covered case studies of MODIS-derived polynya area data for the polynya in the Brunt Ice Shelf region of Antarctica. On average, we are able to completely restore the artificially cloud-covered test areas with a spatial correlation of 0.83 and a mean absolute spatial deviation of 21%.

  5. Cooling vests with phase change material packs: the effects of temperature gradient, mass and covering area.

    Science.gov (United States)

    Gao, Chuansi; Kuklane, Kalev; Holmer, Ingvar

    2010-05-01

    Phase change material (PCM) absorbs or releases latent heat when it changes phases, making thermal-regulated clothing possible. The objective of this study was to quantify the relationships between PCM cooling rate and temperature gradient, mass and covering area on a thermal manikin in a climatic chamber. Three melting temperatures (24, 28, 32 degrees C) of the PCMs, different mass, covering areas and two manikin temperatures (34 and 38 degrees C) were used. The results showed that the cooling rate of the PCM vests tested is positively correlated with the temperature gradient between the thermal manikin and the melting temperature of the PCMs. The required temperature gradient is suggested to be greater than 6 degrees C when PCM vests are used in hot climates. With the same temperature gradient, the cooling rate is mainly determined by the covering area. The duration of the cooling effect is dependent on PCM mass and the latent heat. STATEMENT OF RELEVANCE: The study of factors affecting the cooling rate of personal cooling equipment incorporated with PCM helps to understand cooling mechanisms. The results suggest climatic conditions, the required temperature gradient, PCM mass and covering area should be taken into account when choosing personal PCM cooling equipment.

  6. An appraisal of the CORINE land cover database in airport catchment area analysis using GIS approach

    NARCIS (Netherlands)

    Suau-Sanchez, P.; Burghouwt, G.; Pallarres-Barbera, M.

    2014-01-01

    This paper presents a free available dataset, the CORINE land cover that helps dealing with the biases caused by pre-defined and heterogeneous census district boundaries in airport catchment area analysis in Europe. Using this dataset and a conventional GIS software it is possible to measure the

  7. Land Cover Change and Woodland Degradation in a Charcoal Producing Semi-Arid Area in Kenya

    NARCIS (Netherlands)

    Kiruki, H.M.; van der Zanden, E.H.; Malek, Z.; Verburg, P.H.

    2016-01-01

    Woodlands in Kenya are undergoing land cover change and degradation leading to loss of livelihoods. Uncontrolled charcoal production, although a livelihood source for communities living in woodland areas of Kenya, leads to woodland degradation. We used Landsat imagery, field plot data and household

  8. Mixed waste focus area alternative technologies workshop

    International Nuclear Information System (INIS)

    Borduin, L.C.; Palmer, B.A.; Pendergrass, J.A.

    1995-01-01

    This report documents the Mixed Waste Focus Area (MWFA)-sponsored Alternative Technology Workshop held in Salt Lake City, Utah, from January 24--27, 1995. The primary workshop goal was identifying potential applications for emerging technologies within the Options Analysis Team (OAT) ''wise'' configuration. Consistent with the scope of the OAT analysis, the review was limited to the Mixed Low-Level Waste (MLLW) fraction of DOE's mixed waste inventory. The Los Alamos team prepared workshop materials (databases and compilations) to be used as bases for participant review and recommendations. These materials derived from the Mixed Waste Inventory Report (MWIR) data base (May 1994), the Draft Site Treatment Plan (DSTP) data base, and the OAT treatment facility configuration of December 7, 1994. In reviewing workshop results, the reader should note several caveats regarding data limitations. Link-up of the MWIR and DSTP data bases, while representing the most comprehensive array of mixed waste information available at the time of the workshop, requires additional data to completely characterize all waste streams. A number of changes in waste identification (new and redefined streams) occurred during the interval from compilation of the data base to compilation of the DSTP data base with the end result that precise identification of radiological and contaminant characteristics was not possible for these streams. To a degree, these shortcomings compromise the workshop results; however, the preponderance of waste data was linked adequately, and therefore, these analyses should provide useful insight into potential applications of alternative technologies to DOE MLLW treatment facilities

  9. The application of remote sensing technique to metallogenetic prognosis in the covered area

    International Nuclear Information System (INIS)

    Huang Xianfang; Tian Hua; Luo Fusheng; Feng Jie; Huang Shutao; Guo Hongyan; Zhang Shuiming

    1994-08-01

    The idea, method and procedure of remote sensing research in the covered area are discussed. Using satellite image processing method (including faint information processing) in combination with multiple information comprehensive interpretation to decipher information of geological bodies covered with unconsolidated overburden and to predict favourable districts is also introduced. Taking the Yili basin for example, how to interpret ore-controlling factors is described. The concealed productive uranium formations which dominate uranium distribution have been delineated. The uplift and subsidence which are related to sedimentary environment and mineralization concentration have been discriminated. The faults (including the buried faults) which control the formation and development of the basin have been discerned. The stable and active areas, which are connected with uranium concentration, and preservation, and regional discharge zone have been interpreted. The result shows the feasibility of using remote sensing technique to predict the mineralization in the covered area, and six target areas have been optimized for further uranium reconnaissance and exploration in the study area

  10. Radiofrequency Field Distribution Assessment in Indoor Areas Covered by Wireless Local Area Network

    Directory of Open Access Journals (Sweden)

    HELBET, R.

    2009-02-01

    Full Text Available Electromagnetic environment becomes day by day more congested. Radio communication systems in the short range are now part of everyday life, and there is a need to also assess the pollution level due to their emission if we take into account human health and protection. There is consistent scientific evidence that environmental electromagnetic field may cause undesirable biological effects or even health hazards. Present paper aims at giving a view on exposure level due to wireless local area networks (WLAN emission solely, as part of environmental radiofrequency pollution. Highly accurate measurements were made indoor by using a frequency-selective measurement system and identifying the correct settings for an error-minimum assessment. We focused on analysis of the electric flux density distribution inside a room, in the far field of the emitting antennas, in case of a single network communication channel. We analyze the influence the network configuration parameters have on the field level. Distance from the source and traffic rate are also important parameters that affect the exposure level. Our measurements indicate that in the immediate vicinity of the WLAN stations the average field may reach as much as 13% from the present accepted reference levels given in the human exposure standards.

  11. THE USE OF DIGITAL PHOTOGRAPHS TO QUANTIFY VEGETATION GROUND COVER IN DEGRADED AREAS

    Directory of Open Access Journals (Sweden)

    Marinete Martins Azevedo

    2005-05-01

    Full Text Available This study was aimed at assessing the possibility to use digital photographs to evaluate success of the reclamation of a gravel-mined degraded area. The indicator used to measure success was the degree of vegetation ground cover. Photographs were taken with a Canon camera (model Power Shot A 100. On 11th of October 2003, in a sunny day (without clouds, a total of 24 photographs were taken of the centre of the 24 experimental plots. All the 24 photographs were processed with ENVI 3.5 software following the same procedures appliedto process satellite scenes. In each scene analysed, two classes - vegetation cover and bared soil - were identified with the maximum likelihood algorithm. Results showed that digital photographs can be used in the quantification of vegetation ground cover and that the technique employed in this study can be applied to evaluate methodologies of reclamation of mined areas in which the establishment of vegetation is expected. The technique tested in thisstudy can be employed by government agencies in charge of land reclamation plans because it is efficient in determining vegetation ground cover, is easy to perform and is not expensive.

  12. Forest area in Costa Rica: a comparative study of tropical forest cover estimates over time.

    Science.gov (United States)

    Kleinn, Lenin; Corrales, Christoph; Morales, David

    2002-01-01

    Forest area figures. at a given point in time and for a given region of interest, differ considerably, affecting the calculation of deforestation rates and thus confuse the political and scientific discussion on the state and change of the resource forest. This article discusses the variation of published forest cover figures, using Costa Rica as an example. A list of published figures on the forest cover of Costa Rica from 1940 onwards is analyzed. Reasons for the differences are hypothesized and discussed. These differences are mainly in the definition of forest and forest classes included, in the type of the studies conducted (mapping and/or sampling), in the precision of the estimates, and in the information sources used. It is concluded that part of the problem is inherent in the nature of the resource 'forest'. Quality and completeness of the presentation of the forest cover estimates are a clue to their correct understanding and interpretation. The latter point being especially relevant, as forest cover data have both a technical-scientific and a political meaning and are used as relevant arguments in many discussions. In the example of Costa Rica, a general downward trend is observed up to about 1985/1990, whereas after that forest area figures are on the average at a markedly higher level. Some hypotheses for this change in the trend are discussed.

  13. AGROPHYSICAL ASPECTS OF TECHNOLOGICAL LOAD REGULATION ON SOIL COVER IN THE MODERN AGROLANDSCAPES

    Directory of Open Access Journals (Sweden)

    Barvinskyi A.V.

    2016-05-01

    Full Text Available Modern agricultural landuseof researched Tetiivskyi-Boguslavskyi nature-agricultural district of Kyiv region is characterized by high technological loading on the soil covering, associated with the transformation of lands structure and sowing areas of crops under the influence of market situations. The high level of technological loading on land resources causes the development of degradation processes, and as a result – reduced lands productivity. The main reasons are: unbalanced development of the productive forces and exhausting exploitation of land resources, producers ignoring of environmental imperatives, technical, technological and organizational backwardness of agricultural production; embryonic nature of ecological and economical mechanism of land use and realization of land protection measures, the lack of perfect legal framework of regulating and management of resource- ecological security at national, regional and local levels. Increasing of anthropogeneous pressure on soil (excessive soil tillage in agricultural landscapes, ecologically unsustainable use of agricultural chemicals, high intensity of heavy agricultural machinery, etc. leads to increase of degradation processes almost on the all area of arable land (Medvedev, 1994. So important is the continuous monitoring of agrophysical condition of soils and development of scientific and practical foundations of optimizing the physical parameters of fertility. The environmentally unbalanced application of anthropogeneous factors results in agrophysical degradation of arable lands, what is displaied in top soil overcompaction.Experimentally found that depending on how the agricultural land use equilibrium bulk density of the gray forest soils varies between 1,35-1,58 g/cm3, dark-gray forest soils - 1,36-1,44, podzolized chernozem - 1,26-1,33, typical chernozem- 1,09-1,18 g/cm3, that indicating the imbalance of soil-physical factors, a significant deviation from the requirements of

  14. [Retrieval of Copper Pollution Information from Hyperspectral Satellite Data in a Vegetation Cover Mining Area].

    Science.gov (United States)

    Qu, Yong-hua; Jiao, Si-hong; Liu, Su-hong; Zhu, Ye-qing

    2015-11-01

    level, using stepwise multiple linear regression and cross validation on the dataset which is consisting of 44 groups of copper ion content information in the polluted vegetation leaves from Dexing Copper Mine in Jiangxi Province to build up a statistical model by also incorporating the HJ-1 satellite images. This model was then used to estimate the copper content distribution over the whole research area at Dexing Copper Mine. The result has shown that there is strong statistical significance of the model which revealed the most sensitive waveband to copper ion is located at 516 nm. The distribution map illustrated that the copper ion content is generally in the range of 0-130 mg · kg⁻¹ in the vegetation covering area at Dexing Copper Mine and the most seriously polluted area is located at the South-east corner of Dexing City as well as the mining spots with a higher value between 80 and 100 mg · kg⁻¹. This result is consistent with the ground observation experiment data. The distribution map can certainly provide some important basic data on the copper pollution monitoring and treatment.

  15. Urban green land cover changes and their relation to climatic variables in an anthropogenically impacted area

    Science.gov (United States)

    Zoran, Maria A.; Dida, Adrian I.

    2017-10-01

    Urban green areas are experiencing rapid land cover change caused by human-induced land degradation and extreme climatic events. Vegetation index time series provide a useful way to monitor urban vegetation phenological variations. This study quantitatively describes Normalized Difference Vegetation Index NDVI) /Enhanced Vegetation Index (EVI) and Leaf Area Index (LAI) temporal changes for Bucharest metropolitan region land cover in Romania from the perspective of vegetation phenology and its relation with climate changes and extreme climate events. The time series from 2000 to 2016 of the NOAA AVHRR and MODIS Terra/Aqua satellite data were analyzed to extract anomalies. Time series of climatic variables were also analyzed through anomaly detection techniques and the Fourier Transform. Correlations between NDVI/EVI time series and climatic variables were computed. Temperature, rainfall and radiation were significantly correlated with almost all land-cover classes for the harmonic analysis amplitude term. However, vegetation phenology was not correlated with climatic variables for the harmonic analysis phase term suggesting a delay between climatic variations and vegetation response. Training and validation were based on a reference dataset collected from IKONOS high resolution remote sensing data. The mean detection accuracy for period 2000- 2016 was assessed to be of 87%, with a reasonable balance between change commission errors (19.3%), change omission errors (24.7%), and Kappa coefficient of 0.73. This paper demonstrates the potential of moderate - and high resolution, multispectral imagery to map and monitor the evolution of the physical urban green land cover under climate and anthropogenic pressure.

  16. Hydrological Modelling and data assimilation of Satellite Snow Cover Area using a Land Surface Model, VIC

    Science.gov (United States)

    Naha, Shaini; Thakur, Praveen K.; Aggarwal, S. P.

    2016-06-01

    The snow cover plays an important role in Himalayan region as it contributes a useful amount to the river discharge. So, besides estimating rainfall runoff, proper assessment of snowmelt runoff for efficient management and water resources planning is also required. A Land Surface Model, VIC (Variable Infiltration Capacity) is used at a high resolution grid size of 1 km. Beas river basin up to Thalot in North West Himalayas (NWH) have been selected as the study area. At first model setup is done and VIC has been run in its energy balance mode. The fluxes obtained from VIC has been routed to simulate the discharge for the time period of (2003-2006). Data Assimilation is done for the year 2006 and the techniques of Data Assimilation considered in this study are Direct Insertion (D.I) and Ensemble Kalman Filter (EnKF) that uses observations of snow covered area (SCA) to update hydrologic model states. The meteorological forcings were taken from 0.5 deg. resolution VIC global forcing data from 1979-2006 with daily maximum temperature, minimum temperature from Climate Research unit (CRU), rainfall from daily variability of NCEP and wind speed from NCEP-NCAR analysis as main inputs and Indian Meteorological Department (IMD) data of 0.25 °. NBSSLUP soil map and land use land cover map of ISRO-GBP project for year 2014 were used for generating the soil parameters and vegetation parameters respectively. The threshold temperature i.e. the minimum rain temperature is -0.5°C and maximum snow temperature is about +0.5°C at which VIC can generate snow fluxes. Hydrological simulations were done using both NCEP and IMD based meteorological Forcing datasets, but very few snow fluxes were obtained using IMD data met forcing, whereas NCEP based met forcing has given significantly better snow fluxes throughout the simulation years as the temperature resolution as given by IMD data is 0.5°C and rainfall resolution of 0.25°C. The simulated discharge has been validated using observed

  17. GENERATION OF 2D LAND COVER MAPS FOR URBAN AREAS USING DECISION TREE CLASSIFICATION

    DEFF Research Database (Denmark)

    Höhle, Joachim

    2014-01-01

    image analysis techniques. The proposed methodology is described step by step. The classification, assessment, and refinement is carried out by the open source software “R”; the generation of the dense and accurate digital surface model by the “Match-T DSM” program of the Trimble Company. A practical...... like buildings, roads, grassland, trees, hedges, and walls from such an ‘intelligent’ point cloud. The decision tree is derived from training areas which borders are digitized on top of a false-colour orthoimage. The produced 2D land cover map with six classes is then subsequently refined by using...

  18. Dust pollution of snow cover in the industrial areas of Tomsk city (Western Siberia, Russia)

    OpenAIRE

    Talovskaya, Anna Valerievna; Filimonenko, Ekaterina Anatolievna; Osipova, Nina Aleksandrovna; Yazikov, Yegor (Egor) Grigoryevich; Nadeina, Louise Vasilievna

    2016-01-01

    This article describes the results of long-term monitoring (2007-2014) of snow cover pollution in the territory of Tomsk city. Snow samples were collected in the territory of Tomsk. Determination of dust load level was carried out by comparing with the background and reference values. It has been determined that the north-east and central parts of Tomsk are the most contaminated areas, where brickworks, coal and gas-fired thermal power plant are located. The analysis of long-term dynamics sho...

  19. Dust pollution of snow cover in the industrial areas of Tomsk city (Western Siberia, Russia)

    Science.gov (United States)

    Talovskaya, A. V.; Filimonenko, E. A.; Osipova, N. A.; Yazikov, E. G.; Nadeina, L. V.

    2016-03-01

    This article describes the results of long-term monitoring (2007-2014) of snow cover pollution in the territory of Tomsk city. Snow samples were collected in the territory of Tomsk. Determination of dust load level was carried out by comparing with the background and reference values. It has been determined that the north-east and central parts of Tomsk are the most contaminated areas, where brickworks, coal and gas-fired thermal power plant are located. The analysis of long-term dynamics showed a dust load decrease in the vicinity of coal and gas-fired thermal power plant due to upgrading of the existing dust collecting systems. During the monitoring period the high dust load in the vicinity of brickworks did not change. The lowest value of the dust load on snow cover was detected in the vicinity of the petrochemical plant and concrete product plants. The near and far zones of dust load on snow cover were determined with the reference to the location of the studied plants.

  20. Hyperspectral imaging technology for revealing the original handwritings covered by the same inks

    Directory of Open Access Journals (Sweden)

    Yuanyuan Lian

    2017-01-01

    Full Text Available This manuscript presents a preliminary investigation on the applicability of hyperspectral imaging technology for nondestructive and rapid analysis to reveal covered original handwritings. The hyperspectral imager Nuance-Macro was used to collect the reflected light signature of inks from the overlapping parts. The software Nuance1p46 was used to analyze the reflected light signature of inks which shows the covered original handwritings. Different types of black/blue ballpoint pen inks and black/blue gel pen inks were chosen for sample preparation. From the hyperspectral images examined, the covered original handwritings of application were revealed in 90.5%, 69.1%, 49.5%, and 78.6% of the cases. Further, the correlation between the revealing effect and spectral characteristics of the reflected light of inks at the overlapping parts was interpreted through theoretical analysis and experimental verification. The results indicated that when the spectral characteristics of the reflected light of inks at the overlapping parts were the same or very similar to that of the ink that was used to cover the original handwriting, the original handwriting could not be shown. On the contrary, when the spectral characteristics of the reflected light of inks at the overlapping parts were different to that of the ink that was used to cover the original handwriting, the original handwriting was revealed.

  1. Modeling of surface dust concentration in snow cover at industrial area using neural networks and kriging

    Science.gov (United States)

    Sergeev, A. P.; Tarasov, D. A.; Buevich, A. G.; Shichkin, A. V.; Tyagunov, A. G.; Medvedev, A. N.

    2017-06-01

    Modeling of spatial distribution of pollutants in the urbanized territories is difficult, especially if there are multiple emission sources. When monitoring such territories, it is often impossible to arrange the necessary detailed sampling. Because of this, the usual methods of analysis and forecasting based on geostatistics are often less effective. Approaches based on artificial neural networks (ANNs) demonstrate the best results under these circumstances. This study compares two models based on ANNs, which are multilayer perceptron (MLP) and generalized regression neural networks (GRNNs) with the base geostatistical method - kriging. Models of the spatial dust distribution in the snow cover around the existing copper quarry and in the area of emissions of a nickel factory were created. To assess the effectiveness of the models three indices were used: the mean absolute error (MAE), the root-mean-square error (RMSE), and the relative root-mean-square error (RRMSE). Taking into account all indices the model of GRNN proved to be the most accurate which included coordinates of the sampling points and the distance to the likely emission source as input parameters for the modeling. Maps of spatial dust distribution in the snow cover were created in the study area. It has been shown that the models based on ANNs were more accurate than the kriging, particularly in the context of a limited data set.

  2. Technology strategy for subsea processing and transport; Technology Target Areas; TTA6 - Subsea processing and transportation

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    OG21 (www.OG21.org) Norway's official technology strategy for the petroleum sector issued a revised strategy document in November 2005 (new strategy planned in 2009). In this document 'Subsea processing and transport' was identified as one of the eight new technology target areas (TTAs). The overall OG21 strategy document is on an aggregated level, and therefore the Board of OG21 decided that a sub-strategy for each TTA was needed. This document proposes the sub-strategy for the technology target area 'Subsea processing and transport' which covers the technology and competence necessary to effectively transport well stream to a platform or to onshore facilities. This includes multiphase flow modelling, flow assurance challenges to avoid problems with hydrates, asphaltenes and wax, subsea or downhole fluid conditioning including bulk water removal, and optionally complete water removal, and sand handling. It also covers technologies to increase recovery by pressure boosting from subsea pumping and/or subsea compression. Finally it covers technologies to facilitate subsea processing such as control systems and power supply. The vision of the Subsea processing and transport TTA is: Norway is to be the leading international knowledge- and technology cluster in subsea processing and transport: Sustain increased recovery and accelerated production on the NCS by applying subsea processing and efficient transport solutions; Enable >500 km gas/condensate multiphase well stream transport; Enable >200 km oil-dominated multiphase well stream transport; Enable well stream transport of complex fluids; Enable subsea separation, boosting compression, and water injection; Enable deepwater developments; Enable environmentally friendly and energy efficient field development. Increase the export of subsea processing and transport technology: Optimize technology from the NCS for application worldwide; Develop new technology that can meet the challenges found in

  3. Science and Technology Business Area Strategic Plan

    National Research Council Canada - National Science Library

    Paul, Richard

    2000-01-01

    The S&T Business Area Strategic Plan has been updated to include lessons learned over the last two years, identifies areas that need to be reviewed further, addresses business opportunities and threats...

  4. Habitat Characteristics of Bracken-Covered Areas Intended for Afforestation in Ličko Sredogorje

    Directory of Open Access Journals (Sweden)

    Zvonko Seletković

    2013-12-01

    Full Text Available Background and Purpose: Forest cultures in continental part of Croatia are mainly based on bracken-covered areas and moors on deserted agriculture soils and pastures. Successful afforestation i.e. establishment of forest cultures depends among other things on the understanding of habitats and ecology of forest trees. The choice of best species of forest trees for afforestation needs to be based on the research in soil and climate characteristics of target habitats. The aims of this research were to show mesoclimatic characteristics of Ličko sredogorje and microclimatic and pedological characteristics of Ličko polje. Also, based on habitat characteristics and ecology of forest trees, the aim was to determine species of forest trees suitable for afforestation of bracken-covered areas. Materials and Methods: Climate, microclimate, pedological and plant nutrition researches were done at the area of Lika highlands. Climate analysis was done according to air temperatures, amount of precipitation, relative air humidity and other climate elements and appearances. Composite soil samples were taken from the depth of 0-30 cm in order to determine plant nutrition potential. Samples were prepared for further analysis in the laboratory. Results: The highest average annual air temperature of 9.6 °C was found at weather station Gračac and the lowest at Korenica station (8.1 °C. Average amount of precipitation for this region was around 1500 mm. Monthly rain factors were ranging from arid to perhumid. Considering thermal character of the climate, the area has moderately warm climate. Average volumetric soil humidity is 14.2 %. Soil has strong acid reaction, is very humus, good to richly supplied with total nitrogen, content of physiologically active phosphorus and potassium is low, and C/N ration normal. Conclusions: According to habitat characteristics in the area of Ličko sredogorje and ecological demands of forest tree species, forest cultures of Common

  5. Spatial and temporal analysis of the land cover in riparian buffer zones (Areas for Permanent Preservation in Sorocaba City, SP, Brazil

    Directory of Open Access Journals (Sweden)

    Sergio Henrique Alves

    2009-08-01

    Full Text Available Considering the fundamental role that the riparian vegetation plays in relation to maintenance of the environmental health of a watershed and the necessity of restoring sectors of the buffer zone without natural vegetation, in this paper we investigated what land cover classes occur along the riparian buffer stripes considered Area for Permanent Preservation (APP in the Sorocaba municipality, SP in three periods: 1988, 1995 and 2003. Based on GIS technology and using the drainage network map, the APP stripes (riparian buffer zones map was generated, and this map was overlaid to the land cover map (1988, 1995 and 2003 to provide a land cover map specifically of the riparian buffer zones. The results show that 58.43% of the APPs have no land cover of native vegetation and therefore, need to be reforested, representing 5,400 hectares to be restored.

  6. Decontamination and decommissioning focus area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    This report presents details of the facility deactivation, decommissioning, and material disposition research for development of new technologies sponsored by the Department of Energy. Topics discussed include; occupational safety, radiation protection, decontamination, remote operated equipment, mixed waste processing, recycling contaminated metals, and business opportunities

  7. Variability of snow line elevation, snow cover area and depletion in the main Slovak basins in winters 2001–2014

    Directory of Open Access Journals (Sweden)

    Krajčí Pavel

    2016-03-01

    Full Text Available Spatial and temporal variability of snow line (SL elevation, snow cover area (SCA and depletion (SCD in winters 2001–2014 is investigated in ten main Slovak river basins (the Western Carpathians. Daily satellite snow cover maps from MODIS Terra (MOD10A1, V005 and Aqua (MYD10A1, V005 with resolution 500 m are used.

  8. FY97 Materials & Processes Technology Area Plan

    Science.gov (United States)

    1996-09-01

    preproduction ability. Concentrator with Refractive verdsion engines. Trimarc is "--To meet 1700*F - 2800*F Linear Element Technology). 40% lighter than...graph- can also be used as acuators for tios of 1986 engine per- ite foams for structures. ailerons, flaps and landing gear formance baseline...Aerial Aluminum Garnet SCARLET - Solar Concentrator Vehicle Ni - Nickel with Refractive Linear Ele- UHF - Ultra High Frequency NLO - Nonlinear Optical or

  9. CLPX-Satellite: EO-1 Hyperion Surface Reflectance, Snow-Covered Area, and Grain Size, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set consists of apparent surface reflectance, subpixel snow-covered area, and grain size collected from the Hyperion hyperspectral imager. The Hyperion...

  10. BOREAS Follow-On DSP-09 Moss Cover Classification at Three Area Scales

    Data.gov (United States)

    National Aeronautics and Space Administration — BOREAS follow-on group DSP-9 mapped surface moss type at three scales (1 km, 30 m, and 10 m) based on observed associations between moss cover and land cover type.

  11. Electrical markets, energy security and technology diversification: nuclear as cover against gas and carbon price risks?

    International Nuclear Information System (INIS)

    Roques, F.A.; Newbery, D.M.; Nuttall, W.J.; Neufville, R. de

    2005-01-01

    Recent tension in the oil and gas markets has brought back the concept of energy offer diversification. Electrical production technology diversification in a country helps improve the security of supply and make up for the negative effects of hydrocarbons price variations. The portfolio and real options theories help to quantify the optimum diversification level for a country or a power company. The cover value of a nuclear investment for a power company facing cost uncertainties (price of gas and of carbon dioxide emission permit) and proceeds (price of electricity) is assessed. A strong link between the prices of gas and electricity reduces incentives to private producers to diversify, disputing the capacity of a liberalized electrical market to achieve optimum technology diversity from a domestic point of view. (authors)

  12. Technology Area Roadmap for In-Space Propulsion Technologies

    Science.gov (United States)

    Johnson, Les; Meyer, Michael; Palaszewski, Bryan; Coote, David; Goebel, Dan; White, Harold

    2012-01-01

    The exponential increase of launch system size.and cost.with delta-V makes missions that require large total impulse cost prohibitive. Led by NASA fs Marshall Space Flight Center, a team from government, industry, and academia has developed a flight demonstration mission concept of an integrated electrodynamic (ED) tethered satellite system called PROPEL: \\Propulsion using Electrodynamics.. The PROPEL Mission is focused on demonstrating a versatile configuration of an ED tether to overcome the limitations of the rocket equation, enable new classes of missions currently unaffordable or infeasible, and significantly advance the Technology Readiness Level (TRL) to an operational level. We are also focused on establishing a far deeper understanding of critical processes and technologies to be able to scale and improve tether systems in the future. Here, we provide an overview of the proposed PROPEL mission. One of the critical processes for efficient ED tether operation is the ability to inject current to and collect current from the ionosphere. Because the PROPEL mission is planned to have both boost and deboost capability using a single tether, the tether current must be capable of flowing in both directions and at levels well over 1 A. Given the greater mobility of electrons over that of ions, this generally requires that both ends of the ED tether system can both collect and emit electrons. For example, hollow cathode plasma contactors (HCPCs) generally are viewed as state-of-the-art and high TRL devices; however, for ED tether applications important questions remain of how efficiently they can operate as both electron collectors and emitters. Other technologies will be highlighted that are being investigated as possible alternatives to the HCPC such as Solex that generates a plasma cloud from a solid material (Teflon) and electron emission (only) technologies such as cold-cathode electron field emission or photo-electron beam generation (PEBG) techniques

  13. A Comparison of Novel Optical Remote Sensing-Based Technologies for Forest-Cover/Change Monitoring

    Directory of Open Access Journals (Sweden)

    Gillian V. Lui

    2015-03-01

    Full Text Available Remote sensing is gaining considerable traction in forest monitoring efforts, with the Carnegie Landsat Analysis System lite (CLASlite software package and the Global Forest Change dataset (GFCD being two of the most recently developed optical remote sensing-based tools for analysing forest cover and change. Due to the relatively nascent state of these technologies, their abilities to classify land cover and monitor forest dynamics have yet to be evaluated against more established approaches. Here, we compared maps of forest cover and change produced by the more traditional supervised classification approach with those produced by CLASlite and the GFCD, working with imagery collected over Sierra Leone, West Africa. CLASlite maps of forest change from 2001–2007 and 2007–2014 exhibited the highest overall accuracies (79.1% and 89.6%, respectively and, importantly, the greatest capacity to discriminate natural from planted mature forest growth. CLASlite’s comparative advantage likely derived from its more robust sub-pixel classification logic and numerous user-defined parameters, which resulted in classified products with greater site relevance than those of the two other classification approaches. In light of today’s continuously growing body of analytical toolsets for remotely sensed data, our study importantly elucidates the ways in which methodological processes and limitations inherent in certain classification tools can impact the maps they are capable of producing, and demonstrates the need to understand and weigh such factors before any one tool is selected for a given application.

  14. Improvement of Operational Streamflow Prediction with MODIS-derived Fractional Snow Covered Area Observations

    Science.gov (United States)

    Bender, S.; Burgess, A.; Goodale, C. E.; Mattmann, C. A.; Miller, W. P.; Painter, T. H.; Rittger, K. E.; Stokes, M.; Werner, K.

    2013-12-01

    Water managers in the western United States depend heavily on the timing and magnitude of snowmelt-driven runoff for municipal supply, irrigation, maintenance of environmental flows, and power generation. The Colorado Basin River Forecast Center (CBRFC) of the National Weather Service issues operational forecasts of snowmelt-driven streamflow for watersheds within the Colorado River Basin (CRB) and eastern Great Basin (EGB), across a wide variety of scales. Therefore, the CBRFC and its stakeholders consider snowpack observations to be highly valuable. Observations of fractional snow covered area (fSCA) from satellite-borne instrumentation can better inform both forecasters and water users with respect to subsequent snowmelt runoff, particularly when combined with observations from ground-based station networks and/or airborne platforms. As part of a multi-year collaborative effort, CBRFC has partnered with the Jet Propulsion Laboratory (JPL) under funding from NASA to incorporate observations of fSCA from NASA's Moderate Resolution Imaging Spectroradiometer (MODIS) into the operational CBRFC hydrologic forecasting and modeling process. In the first year of the collaboration, CBRFC and NASA/JPL integrated snow products into the forecasting and decision making processes of the CBRFC and showed preliminary improvement in operational streamflow forecasts. In late 2012, CBRFC and NASA/JPL began retrospective analysis of relationships between the MODIS Snow Covered Area and Grain size (MODSCAG) fSCA and streamflow patterns for several watersheds within the CRB and the EGB. During the 2013 snowmelt runoff season, CBRFC forecasters used MODIS-derived fSCA semi-quantitatively as a binary indicator of the presence or lack of snow. Indication of the presence or lack of snow by MODIS assisted CBRFC forecasters in determining the cause of divergence between modeled and recently observed streamflow. Several examples of improved forecasts from across the CRB and EGB, informed by

  15. Modeling of Alpine Grassland Cover Based on Unmanned Aerial Vehicle Technology and Multi-Factor Methods: A Case Study in the East of Tibetan Plateau, China

    Directory of Open Access Journals (Sweden)

    Baoping Meng

    2018-02-01

    Full Text Available Grassland cover and its temporal changes are key parameters in the estimation and monitoring of ecosystems and their functions, especially via remote sensing. However, the most suitable model for estimating grassland cover and the differences between models has rarely been studied in alpine meadow grasslands. In this study, field measurements of grassland cover in Gannan Prefecture, from 2014 to 2016, were acquired using unmanned aerial vehicle (UAV technology. Single-factor parametric and multi-factor parametric/non-parametric cover inversion models were then constructed based on 14 factors related to grassland cover, and the dynamic variation of the annual maximum cover was analyzed. The results show that (1 nine out of 14 factors (longitude, latitude, elevation, the concentrations of clay and sand in the surface and bottom soils, temperature, precipitation, enhanced vegetation index (EVI and normalized difference vegetation index (NDVI exert a significant effect on grassland cover in the study area. The logarithmic model based on EVI presents the best performance, with an R2 and RMSE of 0.52 and 16.96%, respectively. Single-factor grassland cover inversion models account for only 1–49% of the variation in cover during the growth season. (2 The optimum grassland cover inversion model is the artificial neural network (BP-ANN, with an R2 and RMSE of 0.72 and 13.38%, and SDs of 0.062% and 1.615%, respectively. Both the accuracy and the stability of the BP-ANN model are higher than those of the single-factor parametric models and multi-factor parametric/non-parametric models. (3 The annual maximum cover in Gannan Prefecture presents an increasing trend over 60.60% of the entire study area, while 36.54% is presently stable and 2.86% exhibits a decreasing trend.

  16. Cloud Cover Assessment for Operational Crop Monitoring Systems in Tropical Areas

    Directory of Open Access Journals (Sweden)

    Isaque Daniel Rocha Eberhardt

    2016-03-01

    Full Text Available The potential of optical remote sensing data to identify, map and monitor croplands is well recognized. However, clouds strongly limit the usefulness of optical imagery for these applications. This paper aims at assessing cloud cover conditions over four states in the tropical and sub-tropical Center-South region of Brazil to guide the development of an appropriate agricultural monitoring system based on Landsat-like imagery. Cloudiness was assessed during overlapping four months periods to match the typical length of crop cycles in the study area. The percentage of clear sky occurrence was computed from the 1 km resolution MODIS Cloud Mask product (MOD35 considering 14 years of data between July 2000 and June 2014. Results showed high seasonality of cloud occurrence within the crop year with strong variations across the study area. The maximum seasonality was observed for the two states in the northern part of the study area (i.e., the ones closer to the Equator line, which also presented the lowest averaged values (15% of clear sky occurrence during the main (summer cropping period (November to February. In these locations, optical data faces severe constraints for mapping summer crops. On the other hand, relatively favorable conditions were found in the southern part of the study region. In the South, clear sky values of around 45% were found and no significant clear sky seasonality was observed. Results underpin the challenges to implement an operational crop monitoring system based solely on optical remote sensing imagery in tropical and sub-tropical regions, in particular if short-cycle crops have to be monitored during the cloudy summer months. To cope with cloudiness issues, we recommend the use of new systems with higher repetition rates such as Sentinel-2. For local studies, Unmanned Aircraft Vehicles (UAVs might be used to augment the observing capability. Multi-sensor approaches combining optical and microwave data can be another

  17. Energy technology monitoring - New areas and in-depth investigations

    International Nuclear Information System (INIS)

    Rigassi, R.; Eicher, H.; Steiner, P.; Ott, W.

    2005-01-01

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined long-term trends in the energy technology area in order to provide information that is to form the basis for political action and the distribution of energy research funding in Switzerland. Energy-technology areas examined include variable-speed electrical drives, ventilation systems for low-energy-consumption buildings, membrane technology and the use of plastics in lightweight automobiles. Examples are quoted and the current state of the appropriate technologies and market aspects are examined. Also, the potential and future developments in the areas listed are looked at. The consequences for energy policy and future developments in the technology-monitoring area are considered

  18. Estimating the Fractional Vegetation Cover from GLASS Leaf Area Index Product

    Directory of Open Access Journals (Sweden)

    Zhiqiang Xiao

    2016-04-01

    Full Text Available The fractional vegetation cover (FCover is an essential biophysical variable and plays a critical role in the carbon cycle studies. Existing FCover products from satellite observations are spatially incomplete and temporally discontinuous, and also inaccurate for some vegetation types to meet the requirements of various applications. In this study, an operational method is proposed to calculate high-quality, accurate FCover from the Global LAnd Surface Satellite (GLASS leaf area index (LAI product to ensure physical consistency between LAI and FCover retrievals. As a result, a global FCover product (denoted by TRAGL were generated from the GLASS LAI product from 2000 to present. With no missing values, the TRAGL FCover product is spatially complete. A comparison of the TRAGL FCover product with the Geoland2/BioPar version 1 (GEOV1 FCover product indicates that these FCover products exhibit similar spatial distribution pattern. However, there were relatively large discrepancies between these FCover products over equatorial rainforests, broadleaf crops in East-central United States, and needleleaf forests in Europe and Siberia. Temporal consistency analysis indicates that TRAGL FCover product has continuous trajectories. Direct validation with ground-based FCover estimates demonstrated that TRAGL FCover values were more accurate (RMSE = 0.0865, and R2 = 0.8848 than GEOV1 (RMSE = 0.1541, and R2 = 0.7621.

  19. Multispectral LiDAR Data for Land Cover Classification of Urban Areas.

    Science.gov (United States)

    Morsy, Salem; Shaker, Ahmed; El-Rabbany, Ahmed

    2017-04-26

    Airborne Light Detection And Ranging (LiDAR) systems usually operate at a monochromatic wavelength measuring the range and the strength of the reflected energy (intensity) from objects. Recently, multispectral LiDAR sensors, which acquire data at different wavelengths, have emerged. This allows for recording of a diversity of spectral reflectance from objects. In this context, we aim to investigate the use of multispectral LiDAR data in land cover classification using two different techniques. The first is image-based classification, where intensity and height images are created from LiDAR points and then a maximum likelihood classifier is applied. The second is point-based classification, where ground filtering and Normalized Difference Vegetation Indices (NDVIs) computation are conducted. A dataset of an urban area located in Oshawa, Ontario, Canada, is classified into four classes: buildings, trees, roads and grass. An overall accuracy of up to 89.9% and 92.7% is achieved from image classification and 3D point classification, respectively. A radiometric correction model is also applied to the intensity data in order to remove the attenuation due to the system distortion and terrain height variation. The classification process is then repeated, and the results demonstrate that there are no significant improvements achieved in the overall accuracy.

  20. Vegetation cover, tidal amplitude and land area predict short-term marsh vulnerability in Coastal Louisiana

    Science.gov (United States)

    Schoolmaster, Donald; Stagg, Camille L.; Sharp, Leigh Anne; McGinnis, Tommy S.; Wood, Bernard; Piazza, Sarai

    2018-01-01

    The loss of coastal marshes is a topic of great concern, because these habitats provide tangible ecosystem services and are at risk from sea-level rise and human activities. In recent years, significant effort has gone into understanding and modeling the relationships between the biological and physical factors that contribute to marsh stability. Simulation-based process models suggest that marsh stability is the product of a complex feedback between sediment supply, flooding regime and vegetation response, resulting in elevation gains sufficient to match the combination of relative sea-level rise and losses from erosion. However, there have been few direct, empirical tests of these models, because long-term datasets that have captured sufficient numbers of marsh loss events in the context of a rigorous monitoring program are rare. We use a multi-year data set collected by the Coastwide Reference Monitoring System (CRMS) that includes transitions of monitored vegetation plots to open water to build and test a predictive model of near-term marsh vulnerability. We found that despite the conclusions of previous process models, elevation change had no ability to predict the transition of vegetated marsh to open water. However, we found that the processes that drive elevation change were significant predictors of transitions. Specifically, vegetation cover in prior year, land area in the surrounding 1 km2 (an estimate of marsh fragmentation), and the interaction of tidal amplitude and position in tidal frame were all significant factors predicting marsh loss. This suggests that 1) elevation change is likely better a predictor of marsh loss at time scales longer than we consider in this study and 2) the significant predictive factors affect marsh vulnerability through pathways other than elevation change, such as resistance to erosion. In addition, we found that, while sensitivity of marsh vulnerability to the predictive factors varied spatially across coastal Louisiana

  1.  A global evaluation of forest interior area dynamics using tree cover data from 2000 to 2012

    Science.gov (United States)

    Kurt Riitters; James Wickham; Jennifer K. Costanza; Peter Vogt

    2016-01-01

    Context Published maps of global tree cover derived from Landsat data have indicated substantial changes in forest area from 2000 to 2012. The changes can be arranged in different patterns, with different consequences for forest fragmentation. Thus, the changes in forest area do not necessarily equate to changes in...

  2. Engineering Research, Development and Technology, FY95: Thrust area report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through their collaboration with US industry in pursuit of the most cost-effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where they can establish unique competencies, and (2) conduct high-quality research and development to enhance their capabilities and establish themselves as the world leaders in these technologies. To focus Engineering`s efforts, technology thrust areas are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1995. The report provides timely summaries of objectives methods, and key results from eight thrust areas: computational electronics and electromagnetics; computational mechanics; microtechnology; manufacturing technology; materials science and engineering; power conversion technologies; nondestructive evaluation; and information engineering.

  3. Is forest cover conserved and restored by protected areas?: The case of two wild protected areas inthe Central Pacific of Costa Rica.

    Science.gov (United States)

    Antonio Guzmán, J; Heiner Vega, S

    2015-09-01

    Changes in land use are mainly a consequence of anthropogenic actions. The current agricultural and urban transformations in Costa Rica have raised questions about the effectiveness of conservation and restoration within protected areas. Herein we analyzed the patterns of land use change between three periods: 1997, 2005 and 2010 in terms of magnitude, direction, and pace through categorical maps generated by the photointerpretation for La Cangreja National Park (LCNP), Rancho Mastatal Wildlife Refuge (RMWR), and their surrounding areas (SA), this last compound of one kilometer radius outside the protected areas' boundaries. The matrix which describes the landscape within the protected areas is natural coverage, composed mainly by forest cover and thickets. We found that the most abundant natural cover for both protected areas was forest cover for all years tested. The stability and large areas of forest cover in LCNP and RMWR for 2005 and 2010, reflected that policies, management actions and vigilance, have a positive impact on the conservation and restoration of natural habitats in these Costa Rican Central Pacific areas. However, the high landscape complexity of the SA in 1997, 2005 and 2010 was an evidence of the anthropogenic pressure on these protected areas, and suggested the ineffectiveness of local governments to monitor and abate land use changes, that could hinder the management, conservation and restoration of species in the protected areas.

  4. Engineering research, development and technology: Thrust area report FY 91

    International Nuclear Information System (INIS)

    1991-01-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence, Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) conduct high quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. The thrust area leader is also responsible for carrying out the work that follows from the Engineering Research, Development, and Technology Program so that the results can be applied as early as possible to the needs of LLNL programs. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year, 1991. Its intent is to provide timely summaries of objectives, theories, methods, and results

  5. Siemens technology transfer and cooperation in the nuclear fuel area

    International Nuclear Information System (INIS)

    Holley, H.-P.; Fuchs, J. H.; Rothenbuecher, R. A.

    1997-01-01

    Siemens is a full-range supplier in the area of nuclear power generation with broad experience and activities in the field of nuclear fuel. Siemens has developed advanced fuel technology for all types fuel assemblies used throughout the world and has significant experience worldwide in technology transfer in the field of nuclear fuel. Technology transfer and cooperation has ranged between the provision of mechanical design advice for a specific fuel design and the erection of complete fabrication plants for commercial operation in 3 countries. In the following the wide range of Siemens' technology transfer activities for both fuel design and fuel fabrication technologies are shown

  6. Study Of Land Cover And Condition Catchment Area Groundwater Aquifer In Tanah Merah North Samarinda District Using Resistivity Geoelectric Sounding

    Directory of Open Access Journals (Sweden)

    Djayus

    2017-06-01

    Full Text Available Land cover is a biophysical cover that maintains land conditions in water balance. The purpose of this research is to know the condition of land cover water catchment groundwater aquifer and correlation. This research begins by collecting data on land cover soil type rainfall slopes and groundwaterinformation. Field activities include observation and data collection of land cover geological conditions community wells and geoelectric sounding. Land cover data is classified according to circumstances and conditions. Geoelectric sounding data was analyzed with IP2WIN software interpretation of lithologic variation of rocks and depth based on resistivity value. Plot the position of each lithology sounding with Surfer software obtained kontour rock field boundary and 3D model of the aquifer position.The results showed that the land cover consisted of vegetated areas forests 27221 Ha 4032 and agricultural land 18336 Ha 2716 non-vegetation area 9880 Ha 1464 constructed land Open land 116.33 Ha 17.23 and water body 4.35 Ha 0.64 The condition of land cover in this water catchment area has decreased 6838 Ha 1014 from the previous condition 34059 Ha 5046 to 27221 Ha 4032. Referring to Permenhut RI No. 32 in 2009 total score catchment area 33 including the somewhat critical condition. Groundwater aquifers based on 3D sounding geolistrik modeling consist of a free aquifer for shallow groundwater depth of water level between 2-30 m with thickness 2-65 m and a distorted aquifer for groundwaterin depth of water between 75-150 m With thickness 75-125 m depth of community well 10-45 m. The transfer of land into open pit mines resulted in the destruction of the balance and water system the decreasing decreasing the discharge of the well water of the community drill the failure and the lack of new water discharge of the new wells the loss of groundwaterin several dug wells landslides and mud floods on the farmland

  7. A Water Balance Study of Four Landfill Cover Designs at Material Disposal Area B in Los Alamos, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    David D. Breshears; Fairley J. Barnes; John W. Nyhan; Johnny A. Salazar

    1998-09-01

    The goal of disposing of low-level radioactive and hazardous waste in shallow landfills is to reduce risk to human health and the environment by isolating contaminants until they no longer pose an unacceptable hazard. In order to achieve this, the Department of Energy Environmental Restoration Program is comparing the performance of several different surface covers at Material Disposal Area (MDA) B in Los Alamos. Two conventional landfill were compared with an improved cover designed to minimize plant and animal intrusion and to minimize water infiltration into the underlying wastes. The conventional covers varied in depth and both conventional and improved designs had different combinations of vegetation (grass verses shrub) and gravel mulch (no mulch verses mulch). These treatments were applied to each of 12 plots and water balance parameters were measured from March1987 through June 1995. Adding a gravel mulch significantly influenced the plant covered field plots receiving no gravel mulch averaged 21.2% shrub cover, while plots with gravel had a 20% larger percent cover of shrubs. However, the influence of gravel mulch on the grass cover was even larger than the influence on shrub cover, average grass cover on the plots with no gravel was 16.3%, compared with a 42% increase in grass cover due to gravel mulch. These cover relationships are important to reduce runoff on the landfill cover, as shown by a regression model that predicts that as ground cover is increased from 30 to 90%,annual runoff is reduced from 8.8 to 0.98 cm-a nine-fold increase. We also found that decreasing the slope of the landfill cover from 6 to 2% reduced runoff from the landfill cover by 2.7-fold. To minimize the risk of hazardous waste from landfills to humans, runoff and seepage need to be minimized and evapotranspiration maximized on the landfill cover. This has to be accomplished for dry and wet years at MDA B. Seepage consisted of 1.9% and 6.2% of the precipitation in the average and

  8. ORGANIZATIONAL AND TECHNOLOGICAL SOLUTIONS OF THE RESTORATION OF COVERING CONSTRUCTIONS OF STONE ORTHODOX CHURCHES

    Directory of Open Access Journals (Sweden)

    LYKHOHRAI V. V.

    2017-02-01

    Full Text Available Summary. Problem Statement. A significant part of Orthodox churches in Ukraine, which are architectural monuments, are in unsatisfactory condition. This is due to the lack of timely care for them and the termination of their operation. It should be noted that one of the most important missions of mankind is the prevention of the disappearance of cultural heritage and its preservation for the next generations. Therefore the issue of restoration of Orthodox Church buildings require comprehensive study. Restoration of churches is accompanied by some organizational and technological difficulties. There is complex architectural and spatial shape of the building and the peculiarities of carrying out repair and restoration works. The purpose of the article. The purpose of the article is to highlight the developed organizational and technological solutions for restoring the covering structure. Conclusions. The complex of repair and restoration works should be divided into three stages (preparatory, main and final. A significant period of production takes the preparatory stage (41%. Performing repair and restoration works by the flow method allows to maximize the use of labor resources and a set of construction machines. The use of scaffolds and a modern formwork system for the reestablishment of the central vault allowed to reduce the labor intensity of work, which in turn led to a reduction in the number of employed workers and an increase the pace of work.

  9. E-Area Low-Level Waste Facility Cover Overhang Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hang, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Flach, G. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-05-18

    PORFLOW related analyses were performed with a focus on Slit and Engineered Trenches to evaluate the minimum required cover overhang size that would prevent any adverse impact on the ELLWF overall performance. Cover overhang is defined as the lateral distance that a low-infiltration cover extends beyond the edge of the trench unit in any direction. Analyses were carried out for H-3 (short half-life), I-129 (very long half-life), and Sr-90 (moderate half-life with intermediate Kd) at different overhang sizes (5ft, 10ft, 20ft, 50ft, and infinite), cover timing (0yr, 10yr, 20yr, and 30yr), and scenarios (Intact and a limited Dynamic Compaction Case). H-3, I-129 and Sr-90 are representative of nuclides that typically drive the sum-of-fractions for a trench disposal unit.

  10. Decision Tree and Texture Analysis for Mapping Debris-Covered Glaciers in the Kangchenjunga Area, Eastern Himalaya

    Directory of Open Access Journals (Sweden)

    Adina Racoviteanu

    2012-10-01

    Full Text Available In this study we use visible, short-wave infrared and thermal Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER data validated with high-resolution Quickbird (QB and Worldview2 (WV2 for mapping debris cover in the eastern Himalaya using two independent approaches: (a a decision tree algorithm, and (b texture analysis. The decision tree algorithm was based on multi-spectral and topographic variables, such as band ratios, surface reflectance, kinetic temperature from ASTER bands 10 and 12, slope angle, and elevation. The decision tree algorithm resulted in 64 km2 classified as debris-covered ice, which represents 11% of the glacierized area. Overall, for ten glacier tongues in the Kangchenjunga area, there was an area difference of 16.2 km2 (25% between the ASTER and the QB areas, with mapping errors mainly due to clouds and shadows. Texture analysis techniques included co-occurrence measures, geostatistics and filtering in spatial/frequency domain. Debris cover had the highest variance of all terrain classes, highest entropy and lowest homogeneity compared to the other classes, for example a mean variance of 15.27 compared to 0 for clouds and 0.06 for clean ice. Results of the texture image for debris-covered areas were comparable with those from the decision tree algorithm, with 8% area difference between the two techniques.

  11. Assessing surface water quality and its relation with urban land cover changes in the Lake Calumet area, Greater Chicago.

    Science.gov (United States)

    Wilson, Cyril; Weng, Qihao

    2010-05-01

    Urban land use and land cover change significantly affect spatial and temporal patterns of runoff, which in turn impacts surface water quality. With the exponential growth in urban areas over the past three decades, changes in land use and land cover to cater for the growth of cities has been a conspicuous spectacle in urban spaces. The main goal of this study was to assess the impacts of land cover change on runoff and surface water quality using a partial area hydrology framework. The study employed ArcHydro GIS extension and a modified version of Long-Term Hydrologic and Nonpoint Source Pollution model (L-THIA-NPS) in estimating runoff and nonpoint source pollutant concentration around Lake Calumet between 1992 and 2001. Data employed include National Land Cover Data set, rainfall data, digital elevation model (DEM), Soil Survey Geographic (SSURGO) data, and The United States Environmental Protection Agency's STORET (storage and retrieval) water quality data. The model was able to predict surface water quality reasonably well over the study period. Sensitivity analysis facilitated a manual calibration of the model. Model validation was executed by comparing simulated results following calibration and observed water quality data for the study area. The study demonstrates that the level of concentration of nonpoint source pollutants in surface water within an urban watershed heavily depends on the spatiotemporal variations in areas that contribute towards runoff compared to the spatial extent of change in major land use/land cover.

  12. Variations of Near Surface Energy Balance Caused by Land Cover Changes in the Semiarid Grassland Area of China

    Directory of Open Access Journals (Sweden)

    Qun’ou Jiang

    2014-01-01

    Full Text Available This study applies the Dynamics of Land System (DLS model to simulating the land cover under the designed scenarios and then analyzes the effects of land cover conversion on energy flux in the semiarid grassland area of China with the Weather Research and Forecasting (WRF model. The results indicate that the grassland will show a steadily upgrowing trend under the coordinated environmental sustainability (CES scenario. Compared to the CES scenario, the rate of increase in grassland cover is lower, while the rate of increase in urban land cover will be higher under the rapid economic growth (REG scenario. Although the conversion from cropland to grassland will reduce the energy flux, the expansion of urban area and decreasing of forestry area will bring about more energy flux. As a whole, the energy flux of near surface will obviously not change under the CES scenario, and the climate therefore will not be possible to be influenced greatly by land cover change. The energy flux under the REG scenario is higher than that under the CES scenario. Those research conclusions can offer valuable information for the land use planning and climate change adaptation in the semiarid grassland area of China.

  13. An analysis of CDTN performance in the reactors technology area

    International Nuclear Information System (INIS)

    Pinheiro, R.B.

    1985-01-01

    The author makes an analysis of CDTN (Centro de Desenvolvimento da Tecnologia Nuclear) performance in the reactors technology area, showing difficulties and failures, but emphasizing the particular competence and capacity acquired in this area, as for example: the capacity in codes and methods are of neutronic calculations and nuclear projects, experimental thermohydraulic program, tests services in components and the others. (C.M.) [pt

  14. Information Literacy Education on College of Technology at Kyushu Area

    Science.gov (United States)

    Kozono, Kazutake; Ikeda, Naomitsu; Irie, Hiroki; Fujimoto, Yoichi; Oshima, Shunsuke; Murayama, Koichi; Taguchi, Hirotsugu

    Recently, the importance of an engineering education increases by the development of the information technology (IT) . Development of the information literacy education is important to deal with new IT in the education on college of technology. Our group investigated the current state of information literacy education on college of technology at Kyushu area and the secondary education. In addition, we investigated about the talent whom the industrial world requested. From these investigation results, this paper proposed cooperation with the elementary and secondary education, enhancement of intellectual property education, introduction of information ethics education, introduction of career education and enhancement of PBL to information literacy education on college of technology.

  15. Thrust Area Report, Engineering Research, Development and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R. T.

    1997-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.

  16. N-1: Safeguards Science and Technology Group, Tour Areas

    International Nuclear Information System (INIS)

    Geist, William H.

    2012-01-01

    Group N-1 develops and provides training on nondestructive assay (NDA) technologies intended for nuclear material accounting and control to fulfill both international and domestic obligations. The N-1 group is located at Technical Area (TA)-35 in Buildings 2 and 27. Visitors to the area can observe developed and fielded NDA technologies, as well as the latest research efforts to develop the next generation of NDA technologies. Several areas are used for NDA training. The N-1 School House area typically is used for basic training on neutron- and gamma-ray-based NDA techniques. This area contains an assortment of gamma-ray detector systems, including sodium iodide and high-purity germanium and the associated measurement components. Many types of neutron assay systems are located here, including both standard coincidence and multiplicity counters. The N-1 School House area is also used for holdup training; located here are the mock holdup assemblies and associated holdup measurement tools. Other laboratory areas in the N-1 space are used for specialized training, such as waste NDA, calorimetry, and advanced gamma-ray NDA. Also, many research laboratories in the N-1 space are used to develop new NDA technologies. The calorimetry laboratory is used to develop and evaluate new technologies and techniques that measure the heat signature from nuclear material to determine mass. The micro calorimetry laboratory is being used to develop advanced technologies that can measure gamma rays with extremely high resolution. This technique has been proven in the laboratory setting, and the team is now working to cultivate a field-capable system. The N-1 group also develops remote and unattended systems for the tracking and control of nuclear material. A demonstration of this technology is located within one of the laboratory spaces. The source tracker software was developed by N-1 to monitor the locations and quantities of nuclear materials. This software is currently used to track

  17. Combining MOD10A1 and MYD10A1 Images For Snow Cover Area Monitoring

    Science.gov (United States)

    Tekeli, A. E.

    2008-12-01

    MOD10A1 and MYD10A1 daily snow cover maps at 500 m resolution are available from MODIS sensors on Terra and Aqua satellites. Aqua obtains the image of same region approximately three hours after Terra over Turkey region. MODIS is an optic sensor and cloud cover degrades the usability of derived snow cover maps. Moreover, spectral similarity between clouds and snow complicates their separability in visible imagery. Fortunately, dynamic behavior of clouds enables their discrimination from snow stationary on the surface. Combined use of MOD10A1 and MYD10A1 images mostly reduces the cloud cover present in one image alone and provides better representation of surface snow cover. Comparison of merged images with in situ data indicated higher hit ratios. The individual comparison of MOD10A1 and MYD10A1 images with ground data each yielded 31% hit ratio whereas, the merged images provided 38%. One-day shifts in comparisons increased hit ratios to 52 % and 46% whereas and two-day shifts gave 77 % and 79 % for MOD10A1 and MYD10A1 respectively. Merged maps yielded 54% and 83% for one and two day shifts. The improvement provided by the merging technique is found to be 7% for the present day, 7 % for one- day and 5% for two-day shifts for the whole season. Monthly decomposition resulted 25% improvement as the maximum. The snow cover product obtained by merging Terra and Aqua satellites provided higher hit ratios, as expected.

  18. Characterization ReportOperational Closure Covers for the Area 5 Radioactive Waste Management Site at the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Nevada Geotechnical Sciences

    2005-06-01

    Bechtel Nevada (BN) manages two low-level Radioactive Waste Management Sites (RWMSs) at the Nevada Test Site (NTS) for the U.S. Department of Energy (DOE) National Nuclear Security Administration Nevada Site Office (NNSA/NSO). The Area 3 RWMS is located in south-central Yucca Flat and the Area 5 RWMS is located about 15 miles south, in north-central Frenchman Flat. Though located in two separate topographically closed basins, they are similar in climate and hydrogeologic setting. The Area 5 RWMS uses engineered shallow-land burial cells to dispose of packaged waste, while the Area 3 RWMS uses subsidence craters formed from underground testing of nuclear weapons for the disposal of packaged and unpackaged bulk waste. Over the next several decades, most waste disposal units at both the Area 3 and Area 5 RWMSs are anticipated to be closed. Closure of the Area 3 and Area 5 RWMSs will proceed through three phases: operational closure, final closure, and institutional control. Many waste disposal units at the Area 5RWMS are operationally closed and final closure has been placed on one unit at the Area 3 RWMS (U-3ax/bl). Because of the similarities between the two sites (e.g., type of wastes, environmental factors, operational closure cover designs, etc.), many characterization studies and data collected at the Area 3 RWMS are relevant and applicable to the Area 5 RWMS. For this reason, data and closure strategies from the Area 3 RWMS are referred to as applicable. This document is an interim Characterization Report – Operational Closure Covers, for the Area 5 RWMS. The report briefly describes the Area 5 RWMS and the physical environment where it is located, identifies the regulatory requirements, reviews the approach and schedule for closing, summarizes the monitoring programs, summarizes characterization studies and results, and then presents conclusions and recommendations.

  19. Characterization Report Operational Closure Covers for the Area 5 Radioactive Waste Management Site at the Nevada Test Site

    International Nuclear Information System (INIS)

    Bechtel Nevada Geotechnical Sciences

    2005-01-01

    Bechtel Nevada (BN) manages two low-level Radioactive Waste Management Sites (RWMSs) at the Nevada Test Site (NTS) for the U.S. Department of Energy (DOE) National Nuclear Security Administration Nevada Site Office (NNSA/NSO). The Area 3 RWMS is located in south-central Yucca Flat and the Area 5 RWMS is located about 15 miles south, in north-central Frenchman Flat. Though located in two separate topographically closed basins, they are similar in climate and hydrogeologic setting. The Area 5 RWMS uses engineered shallow-land burial cells to dispose of packaged waste, while the Area 3 RWMS uses subsidence craters formed from underground testing of nuclear weapons for the disposal of packaged and unpackaged bulk waste. Over the next several decades, most waste disposal units at both the Area 3 and Area 5 RWMSs are anticipated to be closed. Closure of the Area 3 and Area 5 RWMSs will proceed through three phases: operational closure, final closure, and institutional control. Many waste disposal units at the Area 5RWMS are operationally closed and final closure has been placed on one unit at the Area 3 RWMS (U-3ax/bl). Because of the similarities between the two sites (e.g., type of wastes, environmental factors, operational closure cover designs, etc.), many characterization studies and data collected at the Area 3 RWMS are relevant and applicable to the Area 5 RWMS. For this reason, data and closure strategies from the Area 3 RWMS are referred to as applicable. This document is an interim Characterization Report - Operational Closure Covers, for the Area 5 RWMS. The report briefly describes the Area 5 RWMS and the physical environment where it is located, identifies the regulatory requirements, reviews the approach and schedule for closing, summarizes the monitoring programs, summarizes characterization studies and results, and then presents conclusions and recommendations

  20. Engineering research, development and technology. Thrust area report, FY93

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report.

  1. Mixed waste characterization, treatment, and disposal focus area. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This paper presents details about the technology development programs of the Department of Energy. In this document, waste characterization, thermal treatment processes, non-thermal treatment processes, effluent monitors and controls, development of on-site innovative technologies, and DOE business opportunities are applied to environmental restoration. The focus areas for research are: contaminant plume containment and remediation; mixed waste characterization, treatment, and disposal; high-level waste tank remediation; landfill stabilization; and decontamination and decommissioning.

  2. Diapering, diaper technology, and diaper area skin health.

    Science.gov (United States)

    Odio, Mauricio; Thaman, Lauren

    2014-11-01

    Disposable diapers are the most common diaper care practice in Western societies today, and their use continues to increase globally. Improvements in disposable diaper technology have helped to reduce the prevalence and severity of diaper dermatitis (DD) over the course of the last few decades. This article reviews how changes in disposable diaper technology interact with the various etiological factors in DD, thus helping to improve overall diaper area skin health for children around the world. © 2014 Wiley Periodicals, Inc.

  3. Mixed waste characterization, treatment, and disposal focus area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    This paper presents details about the technology development programs of the Department of Energy. In this document, waste characterization, thermal treatment processes, non-thermal treatment processes, effluent monitors and controls, development of on-site innovative technologies, and DOE business opportunities are applied to environmental restoration. The focus areas for research are: contaminant plume containment and remediation; mixed waste characterization, treatment, and disposal; high-level waste tank remediation; landfill stabilization; and decontamination and decommissioning

  4. Land-cover change in upper Barataria Basin estuary, Louisiana, 1972-1992: increases in Wetland area.

    Science.gov (United States)

    Nelson, Stacy A C; Soranno, Patricia A; Qi, Jiaguo

    2002-05-01

    The Barataria Basin, Louisiana, USA, is an extensive wetland and coastal estuary system of great economic and intrinsic value. Although high rates of wetland loss along the coastal margin of the Barataria Basin have been well documented, little information exists on whether freshwater wetlands in the upper basin have changed. Our objectives were to quantify land-cover change in the upper basin over 20 years from 1972-1992 and to determine land-cover transition rates among land-cover types. Using 80-m resolution Landsat MSS data from the North American Landscape Characterization (NALC) data archive, we classified images from three time steps (1972, 1985, 1992) into six land-cover types: agriculture, urban, bottomland hardwood forest, swamp forest, freshwater marsh, and open water. Significant changes in land cover occurred within the upper Barataria Basin over the study period. Urban land increased from 8% to 17% of the total upper basin area, primarily due to conversions from agricultural land, and to a lesser degree, bottomland forest. Swamp forest increased from 30% to 41%, associated with conversions from bottomland hardwood forest and freshwater marsh. Overall, bottomland forest decreased 38% and total wetland area increased 21%. Within the upper Barataria, increases in total wetland area may be due to land subsidence. Based on our results, if present trends in the reduction of bottomland forest land cover were to continue, the upper Barataria Basin may have no bottomland hardwood forests left by the year 2025, as it is subjected to multiple stressors both in the higher elevations (from urbanization) and lower elevations (most likely from land subsidence). These results suggest that changes in the upper freshwater portions of coastal estuaries can be large and quite different from patterns observed in the more saline coastal margins.

  5. Technology demonstrations in the Decontamination and Decommissioning Focus Area

    International Nuclear Information System (INIS)

    Bossart, S.J.

    1996-01-01

    This paper describes three large-scale demonstration projects sponsored jointly by the Decontamination and Decommissioning Focus Area (DDFA), and the three US Department of Energy (DOE) Operations Offices that successfully offered to deactivate or decommission (D ampersand D) one of its facilities using a combination of innovative and commercial D ampersand D technologies. The paper also includes discussions on recent technology demonstrations for an Advanced Worker Protection System, an Electrohydraulic Scabbling System, and a Pipe Explorer trademark. The references at the conclusion of this paper should be consulted for more detailed information about the large-scale demonstration projects and recent technology demonstrations sponsored by the DDFA

  6. A large-area, spatially continuous assessment of land cover map error and its impact on downstream analyses.

    Science.gov (United States)

    Estes, Lyndon; Chen, Peng; Debats, Stephanie; Evans, Tom; Ferreira, Stefanus; Kuemmerle, Tobias; Ragazzo, Gabrielle; Sheffield, Justin; Wolf, Adam; Wood, Eric; Caylor, Kelly

    2018-01-01

    Land cover maps increasingly underlie research into socioeconomic and environmental patterns and processes, including global change. It is known that map errors impact our understanding of these phenomena, but quantifying these impacts is difficult because many areas lack adequate reference data. We used a highly accurate, high-resolution map of South African cropland to assess (1) the magnitude of error in several current generation land cover maps, and (2) how these errors propagate in downstream studies. We first quantified pixel-wise errors in the cropland classes of four widely used land cover maps at resolutions ranging from 1 to 100 km, and then calculated errors in several representative "downstream" (map-based) analyses, including assessments of vegetative carbon stocks, evapotranspiration, crop production, and household food security. We also evaluated maps' spatial accuracy based on how precisely they could be used to locate specific landscape features. We found that cropland maps can have substantial biases and poor accuracy at all resolutions (e.g., at 1 km resolution, up to ∼45% underestimates of cropland (bias) and nearly 50% mean absolute error (MAE, describing accuracy); at 100 km, up to 15% underestimates and nearly 20% MAE). National-scale maps derived from higher-resolution imagery were most accurate, followed by multi-map fusion products. Constraining mapped values to match survey statistics may be effective at minimizing bias (provided the statistics are accurate). Errors in downstream analyses could be substantially amplified or muted, depending on the values ascribed to cropland-adjacent covers (e.g., with forest as adjacent cover, carbon map error was 200%-500% greater than in input cropland maps, but ∼40% less for sparse cover types). The average locational error was 6 km (600%). These findings provide deeper insight into the causes and potential consequences of land cover map error, and suggest several recommendations for land

  7. The extraction of alteration anomaly with remote sensing image of vegetation covered area in Xiangshan uranium field, Jiangxi province

    International Nuclear Information System (INIS)

    Wu Zhichun; Hu Rongquan; Guo Fusheng; Xie Caifu; Jiang Yongbiao; Liu Linqing; Zhou Wanpeng

    2013-01-01

    In vegetation covered area of Xiangshan uranium orefield, the iron alteration and argillization were extracted with remote sensing image by using the combining method of interference removing, bands radio and/or PCA and density segmentation. With idea of removing serious and restrain moderate interference, areas of heavy vegetation, Quaternary and waterbody, etc. were first masked and then the masked image were processed by band ration of ETM4/3, ETM3/1 and ETM5/7 and PCA was performed PCA to the ratio images. Finally, by doing extension, filtering and segmentation to PC2 image, the alteration anomaly of iron alteration and argillization was extracted from the image. Field verification of some extracted anomaly has shown that our method is fairly effective in vegetation covered area and the alteration is helpful to uranium exploration. (authors)

  8. Contaminant plumes containment and remediation focus area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs

  9. Contaminant plumes containment and remediation focus area. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs.

  10. DETERMINATION OF LEAF AREA AND PLANT COVER BY USING DIGITAL IMAGE PROCESSING

    OpenAIRE

    LŐKE, ZS.; SOÓS, G.

    2002-01-01

    The development of different crop models, and crop simulation models in particular, pointed out the importance of quantifying the exact value of the leaf area. To measure the leaf size of plants of pinnatifid form, automatic, portable leaf area meters are necessary. In most places these instruments are not available to measure the assimilatory surface size of crops with special leaf shapes. Any cheap and effective method, that could replace the application of expensive portable area meters co...

  11. Marine Protected Area monitoring in the nearshore waters of Grenada, Eastern Caribbean: benthic cover and fish populations

    Directory of Open Access Journals (Sweden)

    Robert Anderson

    2014-09-01

    Full Text Available Grenada is highly dependent on coral reefs as a source of food and to support tourism. Local and global environmental stressors threaten these reefs. Legislation was created for this MPA in 2001, permanent mooring buoys were deployed in 2009 and enforcement of fishing restrictions began in 2010. Initiatives to address point and nonpoint source pollution from the land have recently begun, aimed at reducing stress on reef area. This study documents benthic cover and fish populations associated with reefs in a Marine Protected Area (MPA along Grenada’s southwest coast from 2008 through 2012. Both Point Line Intercept and Photo Quadrat methods were used to assess benthic cover along permanent 30m transects (8 in and 12 outside the area annually. Fish and Diadema antillarum urchin relative abundance were determined based on 2m wide belt surveys along the same transects. The predominant substrate cover was algae, ranging from 41% in 2009 to 74.2% in 2011. A general trend of increasing algal cover was noted. Combined annual survey results prior (2008-2010 and after controls were implemented (2011-2012 showed a significant increase in algal cover. The predominant algal form was macroalgae comprising 65.4% - 90.8% of total algae. Live hard coral percent cover ranged from 8.7% to 21.1%. Little annual variation was observed in percent live coral cover. Branching corals (34.1% - 52.3% of total living hard coral were the most common. Of the 19 living hard coral species identified, Porites porites (21%-23% and Porites astreoides (20% dominated percentage composition. Madracis mirabilis contributed 21% of total live hard coral outside the MPA but only 8.7% in the MPA. Of the 63 species of fish identified in the study areas Chromis spp. (71.5% - 46% was the dominant group. Wrasse had a significant increase from 6.9% in 2008 to 21.5% in 2010 inside the MPA with a similar increase peaking in 2011 outside the MPA. There was a noticeable (though not statistically

  12. THE BROOKHAVEN NATIONAL LABORATORY PERFLUOROCARBON TRACER TECHNOLOGY: A PROVEN AND COST EFFECTIVE METHOD TO VERIFY INTEGRITY AND MONITOR LONG TERM PERFORMANCE OF WALLS, FLOORS, CAPS, AND COVER SYSTEMS.

    Energy Technology Data Exchange (ETDEWEB)

    HEISER, J.; SULLIVAN, T.

    2002-03-11

    Currently, containment system failures are detected by monitoring wells downstream of the waste site. Clearly this approach is inefficient, as the contaminants will have migrated from the disposal area before they are detected. Methods that indicate early cover failure (prior to contaminant release) or predict impending cover failure are needed. The Brookhaven National Laboratory (BNL) Perfluorocarbon Tracer (PFT) technology can measure performance changes and integrity losses as the cover ages. This allows early detection of cover failure or pending failure so that repair or replacement can be made before contaminants leave the disposal cell. The PFT technology has been successfully applied to four subsurface barrier problems, one leak detection problem from underground ducts, and one surface cover problem. Testing has demonstrated that the PFTs are capable of accurately detecting and locating leaks down to fractions of an inch. The PFT technology has several advantages over competing approaches. The ability to simultaneously use multiple PFTs separates it from other gas tracer technologies. Using multiple tracers provides independent confirmation of flaw location, helps to clearly define transport pathways, and can be used for confirmatory testing (e.g., repeat the test using a new tracer). The PFT tests provide a direct measure of flaws in a barrier, whereas other measurements (pressure, moisture content, temperature, subsidence) provide indirect measures that need interpretation. The focus of the six PFT demonstrations has been on engineering aspects of the technology with the intent of finding if a flaw existed in the barrier. Work remains to be done on the scientific basis for this technology. This includes determining PFT diffusion rates through various materials (soils and barrier) as a function of moisture content, determining the effects of barometric pumping on PFT flow for cover systems, and determining wind effects on side slopes of cover systems and

  13. Trends in vegetation cover changes in Bonny area of the Niger Delta ...

    African Journals Online (AJOL)

    The main vegetation type in the area is the mangrove forest, which occupies most of the Niger Delta. The other vegetation type is the secondary (re-growth) vegetation that occupies a small area. The secondary vegetation is surrounded by the mangrove swamp forest; a two-layered vegetation. The one–layered forest has ...

  14. Projecting large-scale area changes in land use and land cover for terrestrial carbon analyses.

    Science.gov (United States)

    Ralph J. Alig; Brett J. Butler

    2004-01-01

    One of the largest changes in US forest type areas over the last half-century has involved pine types in the South. The area of planted pine has increased more than 10-fold since 1950, mostly on private lands. Private landowners have responded to market incentives and government programs, including subsidized afforestation on marginal agricultural land. Timber harvest...

  15. Land related grievances shape tropical forest-cover in areas affected by armed-conflict

    DEFF Research Database (Denmark)

    Nunez, Augusto Carlos Castro; Mertz, Ole; Buritica, Alexander

    2017-01-01

    a multinomial logit model to examine how outcomes of the interactions between carbon-storage, armed-conflict and deforestation rates are linked to social, institutional and economic factors. We use Colombia as a case study because of its protracted armed-conflict, high forest-cover, sustained deforestation......-ownership disputes, the Colombian government might uphold their international climate change commitments via reducing deforestation and hence forest based carbon emissions, while pursuing their national security objective via undermining opportunities for guerrilla groups to operate....

  16. Evapotranspiration Cover for the 92-Acre Area Retired Mixed Waste Pits, Area 5 Waste Management Division, Nevada National Security Site, Final CQA Report

    International Nuclear Information System (INIS)

    2012-01-01

    The report is the Final Construction Quality Assurance (CQA) Report for the 92-Acrew Evapotranspiration Cover, Area 5 Waste Management Division Retired Mixed Waste Pits, Nevada National Security Site, Nevada, for the period of January 20, 2011, to January 31, 2012 The Area 5 RWMS uses engineered shallow-land burial cells to dispose of packaged waste. The 92-Acre Area encompasses the southern portion of the Area 5 RWMS, which has been designated for the first final closure operations. This area contains 13 Greater Confinement Disposal (GCD) boreholes, 16 narrow trenches, and 9 broader pits. With the exception of two active pits (P03 and P06), all trenches and pits in the 92-Acre Area had operational covers approximately 2.4 meters thick, at a minimum, in most areas when this project began. The units within the 92-Acre Area are grouped into the following six informal categories based on physical location, waste types and regulatory requirements: (1) Pit 3 Mixed Waste Disposal Unit (MWDU); (2) Corrective Action Unit (CAU) 111; (3) CAU 207; (4) Low-level waste disposal units; (5) Asbestiform low-level waste disposal units; and (6) One transuranic (TRU) waste trench.

  17. Evapotranspiration Cover for the 92-Acre Area Retired Mixed Waste Pits, Area 5 Waste Management Division, Nevada National Security Site, Final CQA Report

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management; The Delphi Groupe, Inc.; J. A. Cesare and Associates, Inc.

    2012-01-31

    The report is the Final Construction Quality Assurance (CQA) Report for the 92-Acrew Evapotranspiration Cover, Area 5 Waste Management Division Retired Mixed Waste Pits, Nevada National Security Site, Nevada, for the period of January 20, 2011, to January 31, 2012 The Area 5 RWMS uses engineered shallow-land burial cells to dispose of packaged waste. The 92-Acre Area encompasses the southern portion of the Area 5 RWMS, which has been designated for the first final closure operations. This area contains 13 Greater Confinement Disposal (GCD) boreholes, 16 narrow trenches, and 9 broader pits. With the exception of two active pits (P03 and P06), all trenches and pits in the 92-Acre Area had operational covers approximately 2.4 meters thick, at a minimum, in most areas when this project began. The units within the 92-Acre Area are grouped into the following six informal categories based on physical location, waste types and regulatory requirements: (1) Pit 3 Mixed Waste Disposal Unit (MWDU); (2) Corrective Action Unit (CAU) 111; (3) CAU 207; (4) Low-level waste disposal units; (5) Asbestiform low-level waste disposal units; and (6) One transuranic (TRU) waste trench.

  18. Wireless local area network. A new technology of network

    International Nuclear Information System (INIS)

    Wu Yunjun; Zhao Zongtao

    2003-01-01

    This paper introduces Wireless Local Area Network (WLAN), including the concept, history, characters and the foreground of its development, it also narrates in detail the several key techniques used to implement IEEE802.11 WLAN, and ideas on key technology of future progress in wireless LAN field have also been presented. (authors)

  19. Coordinating technology introduction and entrepreneurial activities in rural areas

    NARCIS (Netherlands)

    Fokkema, J.E.; Pennink, B.J.W.; Simatupang, T.M.

    2017-01-01

    © Copyright 2017 Inderscience Enterprises Ltd. The main purpose of this research is to investigate how technology introduction projects in rural areas should be coordinated in order to achieve local economic development and the role of social capital and entrepreneurial activities. Characteristics

  20. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    REGISTRATIONS CLOSED. Announcement of selected candidates will commence towards the end of February. Focus Area Science Technology Summer Fellowship (FAST-SF). REGISTRATIONS CLOSED. Announcement of selected candidates will commence towards the end of February. Associates – 2017. Posted on ...

  1. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1935 Section: Chemistry. Iyer, M P Venkataramana. Date of birth: 1902. Date of death: 27 April 1936. Specialization: Colloid Chemistry. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. Summer Research Fellowship Programme 2018 · Focus Area Science Technology ...

  2. Increasing winter conductive heat transfer in the Arctic sea-ice-covered areas: 1979–2014

    Science.gov (United States)

    Fan, Xieyu; Bi, Haibo; Wang, Yunhe; Fu, Min; Zhou, Xuan; Xu, Xiuli; Huang, Haijun

    2017-12-01

    Sea ice is a quite sensitive indicator in response to regional and global climate changes. Based on monthly mean Pan-Arctic Ice Ocean Modeling and Assimilation System (PIOMAS) sea ice thickness fields, we computed the conductive heat flux (CHF) in the Arctic Ocean in the four winter months (November-February) for a long period of 36 years (1979-2014). The calculated results for each month manifest the increasing extension of the domain with high CHF values since 1979 till 2014. In 2014, regions of roughly 90% of the central Arctic Ocean have been dominated by the CHF values larger than 18 W m-2 (November-December) and 12 W m-2 (January-February), especially significant in the shelf seas around the Arctic Ocean. Moreover, the population distribution frequency (PDF) patterns of the CHF with time show gradually peak shifting toward increased CHF values. The spatiotemporal patterns in terms of the trends in sea ice thickness and other three geophysical parameters, surface air temperature (SAT), sea ice thickness (SIT), and CHF, are well coupled. This suggests that the thinner sea ice cover preconditions for the more oceanic heat loss into atmosphere (as suggested by increased CHF values), which probably contributes to warmer atmosphere which in turn in the long run will cause thinner ice cover. This represents a positive feedback mechanism of which the overall effects would amplify the Arctic climate changes.

  3. Relationships between Characteristics of Urban Green Land Cover and Mental Health in U.S. Metropolitan Areas

    Directory of Open Access Journals (Sweden)

    Wei-Lun Tsai

    2018-02-01

    Full Text Available Urbanization increases risk for depression and other mental disorders. A growing body of research indicates the natural environment confers numerous psychological benefits including alleviation of mental distress. This study examined land cover types and landscape metrics in relation to mental health for 276 U.S. counties within metropolitan areas having a population of 1 million or more. County Health Rankings and Behavioral Risk and Factor Surveillance System (BRFSS provided a measure of mental health. The 2011 National Land Cover Database (NLCD provided data on green land cover types, from which seven landscape metrics were generated to characterize landscape patterns. Spearman’s rho correlation and stepwise logistic regression models, respectively, were employed to examine bivariate and multivariate relationships. Models were adjusted for county population and housing density, region, race, and income to account for potential confounding. Overall, individual measures of landscape patterns showed stronger associations with mental health than percent total cover alone. Greater edge contrast was associated with 3.81% lower odds of Frequent Mental Distress (FMD (Adjusted Odd’s Ratio (AOR = 0.9619, 95% CI = 0.9371, 0.9860. Shrubland cohesion was associated with greater odds of FMD (AOR = 1.0751, 95% CI = 1.0196, 1.1379. In addition, distance between shrubland cover was associated with greater odds of FMD (AOR = 1.0027, 95% CI = 1.0016, 1.0041. Although effect sizes were small, findings suggest different types of landscape characteristics may have different roles in improving mental health.

  4. Forests and Forest Cover - DCNR - State Forest Wild and Natural Areas 2015

    Data.gov (United States)

    NSGIC Education | GIS Inventory — The wild and natural areas layer was derived from the state forest boundary coverage which is being updated frequently. It is derived from survey descriptions and...

  5. Cover layer technology and a new hard coat for cartridge-free Blu-ray disc

    Science.gov (United States)

    Kang, Tae-Sik; Han, Mi Young; Lee, Seong-Keun; Jang, Sung Hoon; Hong, Young Jun; Seo, Hun; Lee, Chang-Ho

    2004-09-01

    Spin coating method for cover layer of Blu-ray Disc (BD) has been studied and a new hard coat resin including antifouling property has been developed. A vacuum chuck was newly designed to minimize the ski-jump effect. 3 mm hard coat layer was stacked onto the 97 mm cover layer by spin coating method.

  6. Temporal distribution of sediment yield from catchments covered by different pine plantation areas

    Directory of Open Access Journals (Sweden)

    Tyas Mutiara Basuki

    2018-04-01

    Full Text Available Soil erosion and sedimentation are environmental problems faced by tropical countries. Many researches on soil erosion-sedimentation have been conducted with various results. Quantifying soil erosion-sedimentation and its temporal distribution are important for watershed management. Therefore, a study with the objective to quantify the amount of suspended sediment from catchments under various pine plantation areas was conducted. The research was undertaken during 2010 to 2017 in seven catchments with various percentage of pine coverage in Kebumen Regency, Central Java Province. The rainfall data were collected from two rainfall stations. A tide gauge was installed at the outlet of each catchment to monitor stream water level. The water samples for every stream water level increment were analyzed to obtain sediment concentration. The results showed that monthly suspended sediment of the catchments was high in January to April and October to December, and low in May to September. The annual suspended sediment fluctuated during the study period. Non-linear correlations were observed between suspended sediment and rainfall as well as suspended sediment and percentage pine areas. The line trend between suspended sediment and percentage of pine areas showed that the increase in pine areas decreased suspended sediment, with the slope of the graph is sharp at the percentage of pine areas from 8% to 40%, then is gentle for pine plantation areas more than 40%.

  7. Digital cover photography for estimating leaf area index (LAI) in apple trees using a variable light extinction coefficient.

    Science.gov (United States)

    Poblete-Echeverría, Carlos; Fuentes, Sigfredo; Ortega-Farias, Samuel; Gonzalez-Talice, Jaime; Yuri, Jose Antonio

    2015-01-28

    Leaf area index (LAI) is one of the key biophysical variables required for crop modeling. Direct LAI measurements are time consuming and difficult to obtain for experimental and commercial fruit orchards. Devices used to estimate LAI have shown considerable errors when compared to ground-truth or destructive measurements, requiring tedious site-specific calibrations. The objective of this study was to test the performance of a modified digital cover photography method to estimate LAI in apple trees using conventional digital photography and instantaneous measurements of incident radiation (Io) and transmitted radiation (I) through the canopy. Leaf area of 40 single apple trees were measured destructively to obtain real leaf area index (LAI(D)), which was compared with LAI estimated by the proposed digital photography method (LAI(M)). Results showed that the LAI(M) was able to estimate LAI(D) with an error of 25% using a constant light extinction coefficient (k = 0.68). However, when k was estimated using an exponential function based on the fraction of foliage cover (f(f)) derived from images, the error was reduced to 18%. Furthermore, when measurements of light intercepted by the canopy (Ic) were used as a proxy value for k, the method presented an error of only 9%. These results have shown that by using a proxy k value, estimated by Ic, helped to increase accuracy of LAI estimates using digital cover images for apple trees with different canopy sizes and under field conditions.

  8. Digital Cover Photography for Estimating Leaf Area Index (LAI in Apple Trees Using a Variable Light Extinction Coefficient

    Directory of Open Access Journals (Sweden)

    Carlos Poblete-Echeverría

    2015-01-01

    Full Text Available Leaf area index (LAI is one of the key biophysical variables required for crop modeling. Direct LAI measurements are time consuming and difficult to obtain for experimental and commercial fruit orchards. Devices used to estimate LAI have shown considerable errors when compared to ground-truth or destructive measurements, requiring tedious site-specific calibrations. The objective of this study was to test the performance of a modified digital cover photography method to estimate LAI in apple trees using conventional digital photography and instantaneous measurements of incident radiation (Io and transmitted radiation (I through the canopy. Leaf area of 40 single apple trees were measured destructively to obtain real leaf area index (LAID, which was compared with LAI estimated by the proposed digital photography method (LAIM. Results showed that the LAIM was able to estimate LAID with an error of 25% using a constant light extinction coefficient (k = 0.68. However, when k was estimated using an exponential function based on the fraction of foliage cover (ff derived from images, the error was reduced to 18%. Furthermore, when measurements of light intercepted by the canopy (Ic were used as a proxy value for k, the method presented an error of only 9%. These results have shown that by using a proxy k value, estimated by Ic, helped to increase accuracy of LAI estimates using digital cover images for apple trees with different canopy sizes and under field conditions.

  9. Surface water hydrology considerations in predicting radon releases from water-covered areas of uranium tailings ponds

    International Nuclear Information System (INIS)

    Nielson, K.K.; Rogers, V.C.

    1986-01-01

    In a recent study for EPA on radon releases from active uranium mills, the authors examined the potential for advective transport of radon through tailings pond waters along with other radon sources in the mill environment. This paper summarizes the parts of the study that dealt with radon releases from the tailings pond area, and discusses the nature and mechanisms of the radon releases from water-covered areas. A reference tailings impoundment is described according to several distinct physical regions, and the conditions affecting radon transport in each are described. Since radon transport through ponded water has not previously been modeled in detail, simple laboratory experiments were conducted to approximate the characteristic transport parameters. The results of these experiments were then used with parameters describing the tailings pond to assess the overall magnitude of radon release expected from the water-covered pond region. The significance of radon releases from the water-covered areas was estimated by comparison to radon fluxes from other, exposed tailings surfaces

  10. Mapping Land Cover and Estimating the Grassland Structure in a Priority Area of the Chihuahuan Desert

    Directory of Open Access Journals (Sweden)

    Alberto Rodríguez-Maturino

    2017-10-01

    Full Text Available A field characterization of the grassland vegetation structure, represented by the coverage of grass canopy (CGC and the grass height, was carried out during three years (2009–2011 in a priority area for the conservation of grasslands of North America. Landsat Thematic Mapper (TM5 images were selected and the information of reflectance was obtained based on the geographical location of each field-sampling site. Linear models, constructed with field and satellite data, with high coefficients of determination for CGC (R2 = 0.81, R2 = 0.81 and R2 = 0.72 and grass height (R2 = 0.82, R2 = 0.79 and R2 = 0.73 were obtained. The maps showed a good level of CGC (>25% and grass height (>25 cm, except for the year 2009, which presented the lowest values of grass height in the area. According to the Kappa Index, a moderate concordance among the three CGC maps was presented (0.49–0.59. Conversely, weak and moderate concordances were found among the grass height maps (0.36–0.59. It was observed that areas with a high CGC do not necessarily correspond to areas with greater grass height values. Based on the data analyzed in this study, the grassland areas are highly dynamic, structurally heterogeneous and the spatial distribution of the variables does not show a definite pattern. From the information generated, it is possible to determine those areas that are the most important for monitoring to then establish effective strategies for the conservation of these grasslands and the protection of threatened migratory bird species.

  11. Land Cover Change Community-based Processing and Analysis System (LC-ComPS): Lessons Learned from Technology Infusion

    Science.gov (United States)

    Masek, J.; Rao, A.; Gao, F.; Davis, P.; Jackson, G.; Huang, C.; Weinstein, B.

    2008-12-01

    The Land Cover Change Community-based Processing and Analysis System (LC-ComPS) combines grid technology, existing science modules, and dynamic workflows to enable users to complete advanced land data processing on data available from local and distributed archives. Changes in land cover represent a direct link between human activities and the global environment, and in turn affect Earth's climate. Thus characterizing land cover change has become a major goal for Earth observation science. Many science algorithms exist to generate new products (e.g., surface reflectance, change detection) used to study land cover change. The overall objective of the LC-ComPS is to release a set of tools and services to the land science community that can be implemented as a flexible LC-ComPS to produce surface reflectance and land-cover change information with ground resolution on the order of Landsat-class instruments. This package includes software modules for pre-processing Landsat-type satellite imagery (calibration, atmospheric correction, orthorectification, precision registration, BRDF correction) for performing land-cover change analysis and includes pre-built workflow chains to automatically generate surface reflectance and land-cover change products based on user input. In order to meet the project objectives, the team created the infrastructure (i.e., client-server system with graphical and machine interfaces) to expand the use of these existing science algorithm capabilities in a community with distributed, large data archives and processing centers. Because of the distributed nature of the user community, grid technology was chosen to unite the dispersed community resources. At that time, grid computing was not used consistently and operationally within the Earth science research community. Therefore, there was a learning curve to configure and implement the underlying public key infrastructure (PKI) interfaces, required for the user authentication, secure file

  12. Monitoring land cover changes in African protected areas in the 21st century

    NARCIS (Netherlands)

    Gross, D.; Dubois, G.; Pekel, J.F.; Mayaux, P.; Holmgren, M.; Prins, H.H.T.; Rondini, C.; Boitani, L.

    2013-01-01

    Africa is home to some of the most vulnerable natural ecosystems and species on the planet. Around 7000 protected areas seek to safeguard the continent's rich biodiversity, but many of them face increasing management challenges. Human disturbances permeating into the parks directly and indirectly

  13. Land use and land cover change detection at Mirzapur Union of Gazipur District of Bangladesh using remote sensing and GIS technology

    International Nuclear Information System (INIS)

    Yesmin, R; Mohiuddin, A S M; Uddin, M J; Shahid, M A

    2014-01-01

    A study was conducted with a view to identify and quantify the changes in land use and land cover occurred during the last 20 years at Mirzapur Union of Gazipur district of Bangladesh using remote sensing and GIS technologies. Two LANDSAT TM images of 1989 and 2009 with 30mx30m spatial resolution were used to determine the temporal land cover changes. Subsequently, a ground verification was done in the study site. The study revealed that forest cover was decreased by 20.29 % and settlement area was found to increase by 28.64% and water bodies was decreased by 6.25 %. In the same period of time, bare land was found to increase by 20.91 % due to the effect of clearing of forest area which is not replanted again. A lot of new infrastructures has been built by this time. Population pressure becomes double enhancing the deforestation of Sal (Shorea robusta). Most prominent features are the emergence of brick fields and various industries. Thus, the above study demonstrated the usefulness of RS and GIS technology regarding resource management and urban planning

  14. A Study on the Land-Cover Change Indicators of Taipei Metropolitan Areas

    International Nuclear Information System (INIS)

    Huang, Kuo-Ching; Chan, Shih-Laing

    2014-01-01

    The traditional research of land cover/land use change sets focus on the spatial unit of parcel or grid for analysis and simulation. Since the change of individual land use would be affected by the surrounding land uses, there is another possibility to explore the land use change in terms of spatial pattern. The paper applies indicators of landscape metrics to analyze pattern characteristics of urban structure, and cluster analysis and discriminant analysis to identify the type of spatial pattern. This paper attempts to analyze land use pattern and its changes by metric analysis with patch-corridor-matrix structure. The process includes three phases. The first phase is to explore categories of land use pattern and attributes by cluster analysis. The second phase is to analyze pattern changes with different periods and to identify properties of pattern changes in the whole system. The final phase is to classify the pattern changes and to look for the relation between different patterns. Through analysis of pattern changes, it would be helpful to realize urban development relative to landscape metrics and to offer new thinking other than traditional urban development thinking

  15. Trace element distribution in the snow cover from an urban area in central Poland.

    Science.gov (United States)

    Siudek, Patrycja; Frankowski, Marcin; Siepak, Jerzy

    2015-05-01

    This work presents the first results from winter field campaigns focusing on trace metals and metalloid chemistry in the snow cover from an urbanized region in central Poland. Samples were collected between January and March 2013 and trace element concentrations were determined using GF-AAS. A large inter-seasonal variability depending on anthropogenic emission, depositional processes, and meteorological conditions was observed. The highest concentration (in μg L(-1)) was reported for Pb (34.90), followed by Ni (31.37), Zn (31.00), Cu (13.71), Cr (2.36), As (1.58), and Cd (0.25). In addition, several major anthropogenic sources were identified based on principal component analysis (PCA), among which the most significant was the activity of industry and coal combustion for residential heating. It was stated that elevated concentrations of some trace metals in snow samples were associated with frequent occurrence of south and southeast advection of highly polluted air masses toward the sampling site, suggesting a large impact of regional urban/industrial pollution plumes.

  16. Urban form analysis employing land cover and spatial metrics: the case of the Lisbon Metropolitan Area

    OpenAIRE

    Marques da Costa, Eduarda; Rocha, Jorge; Rodrigues, Michael

    2009-01-01

    In order to face the challenges of urban planning, there is an increasing need to monitor and quantify urban occupation. This study, conducted within the research project "FURBS: Sustainable Urban Form - Methodological development for Portugal (PTDC/GEO/69109/2006), seeks to examine the urban form of the Lisbon Metropolitan Area (LMA), and its occupation between 1990 and 2000, using spatial metrics. The LMA congregates nearly 3 million inhabitants, around 26% of the Portuguese total popula...

  17. Application of local area network technology in an engineering environment

    International Nuclear Information System (INIS)

    Powell, A.D.; Sokolowski, M.A.

    1990-01-01

    This paper reports on the application of local area network technology in an engineering environment. Mobil Research and Development Corporation Engineering, Dallas, texas has installed a local area network (LAN) linking over 85 microcomputers. This network, which has been in existence for more than three years, provides common access by all engineers to quality output devices such as laser printers and multi-color pen plotters; IBM mainframe connections; electronic mail and file transfer; and common engineering program. The network has been expanded via a wide area ethernet network to link the Dallas location with a functionally equivalent LAN of over 400 microcomputers in Princeton, N.J. Additionally, engineers on assignment at remote areas in Europe, U.S., Africa and project task forces have dial-in access to the network via telephone lines

  18. Wireless body area networks technology, implementation, and applications

    CERN Document Server

    Yuce, Mehmet R

    2011-01-01

    The book provides a comprehensive overview for the latest WBAN systems, technologies, and applications. The chapters of the book have been written by various specialists who are experts in their areas of research and practice. The book starts with the basic techniques involved in designing and building WBAN systems. It explains the deployment issues and then moves into the application areas of WBAN. The remaining chapters focus on the development of hardware, signal processing algorithms, and wireless communication and network design for wearable and implantable body sensors used in WBAN appli

  19. NASA Technology Area 07: Human Exploration Destination Systems Roadmap

    Science.gov (United States)

    Kennedy, Kriss J.; Alexander, Leslie; Landis, Rob; Linne, Diane; Mclemore, Carole; Santiago-Maldonado, Edgardo; Brown, David L.

    2011-01-01

    This paper gives an overview of the National Aeronautics and Space Administration (NASA) Office of Chief Technologist (OCT) led Space Technology Roadmap definition efforts. This paper will given an executive summary of the technology area 07 (TA07) Human Exploration Destination Systems (HEDS). These are draft roadmaps being reviewed and updated by the National Research Council. Deep-space human exploration missions will require many game changing technologies to enable safe missions, become more independent, and enable intelligent autonomous operations and take advantage of the local resources to become self-sufficient thereby meeting the goal of sustained human presence in space. Taking advantage of in-situ resources enhances and enables revolutionary robotic and human missions beyond the traditional mission architectures and launch vehicle capabilities. Mobility systems will include in-space flying, surface roving, and Extra-vehicular Activity/Extravehicular Robotics (EVA/EVR) mobility. These push missions will take advantage of sustainability and supportability technologies that will allow mission independence to conduct human mission operations either on or near the Earth, in deep space, in the vicinity of Mars, or on the Martian surface while opening up commercialization opportunities in low Earth orbit (LEO) for research, industrial development, academia, and entertainment space industries. The Human Exploration Destination Systems (HEDS) Technology Area (TA) 7 Team has been chartered by the Office of the Chief Technologist (OCT) to strategically roadmap technology investments that will enable sustained human exploration and support NASA s missions and goals for at least the next 25 years. HEDS technologies will enable a sustained human presence for exploring destinations such as remote sites on Earth and beyond including, but not limited to, LaGrange points, low Earth orbit (LEO), high Earth orbit (HEO), geosynchronous orbit (GEO), the Moon, near

  20. A GIS technology and method to assess environmental problems from land use/cover changes: Conakry, Coyah and Dubreka region case study

    Directory of Open Access Journals (Sweden)

    L. Sylla

    2012-06-01

    Full Text Available This study is the result of investigating the land use/cover surrounding Conakry city and its two neighboring cities from the past to the present periods which are herein after referred to as this “region” and the impact of numerous changes during that time. These changes have become a major concern for the Guinean government and scientific community. Using map interpretation with integration of remote sensing, GIS technology and a GIS method we investigated the land use/cover and a population dynamism model with the aims of promoting a sustainable recovery and future judicious utilization. We found out that these three cities are on the verge of being unified, as a result of the expansion of urban residential areas and the changing economic realities causing significant influences on this land use/cover change. The pattern of land cover 59 years ago presented a landscape relatively pristine, while that in the present period presents a landscape that is markedly in a degrading decline. During the past 59 years, land use/cover has been influenced by key factors that revolve around socio-economic development, climatic patterns, topography manipulation, and policy implementation influences. The level of degradation of the land use/cover has increased and will oblige the political, scientific and local communities to take note of the environmental changes and set up urgent, rigorous and coherent policies for the rational development and management of the land use/cover resources of this region. That can be part of a model for other countries to reclaim the past sustainable environment.

  1. Monitoring land use/land cover transformations from 1945 to 2007 in two peri-urban mountainous areas of Athens metropolitan area, Greece.

    Science.gov (United States)

    Mallinis, Giorgos; Koutsias, Nikos; Arianoutsou, Margarita

    2014-08-15

    The aims of this study were to map and analyze land use/land cover transitions and landscape changes in the Parnitha and Penteli mountains, which surround the Athens metropolitan area of Attica, Greece over a period of 62 years. In order to quantify the changes between land categories through time, we computed the transition matrices for three distinct periods (1945-1960, 1960-1996, and 1996-2007), on the basis of available aerial photographs used to create multi-temporal maps. We identified systematic and stationary transitions with multi-level intensity analysis. Forest areas in Parnitha remained the dominant class of land cover throughout the 62 years studied, while transitional woodlands and shrublands were the main classes involved in LULC transitions. Conversely, in Penteli, transitional woodlands, along with shrublands, dominated the study site. The annual rate of change was faster in the first and third time intervals, compared to the second (1960-1996) time interval, in both study areas. The category level analysis results indicated that in both sites annual crops avoided to gain while discontinuous urban fabric avoided to lose areas. At the transition level of analysis, similarities as well as distinct differences existed between the two areas. In both sites the gaining pattern of permanent crops with respect to annual crops and the gain of forest with respect to transitional woodland/shrublands were stationary across the three time intervals. Overall, we identified more systematic transitions and stationary processes in Penteli. We discussed these LULC changes and associated them with human interference (activity) and other major socio-economic developments that were simultaneously occurring in the area. The different patterns of change of the areas, despite their geographical proximity, throughout the period of analysis imply that site-specific studies are needed in order to comprehensively assess the driving forces and develop models of landscape

  2. Application of electrical and electromagnetic methods to study sedimentary covers in high mountain areas

    Science.gov (United States)

    Tomecka-Suchoń, Sylwia; Żogała, Bogdan; Gołębiowski, Tomisław; Dzik, Grażyna; Dzik, Tomasz; Jochymczyk, Krzysztof

    2017-08-01

    The results of geophysical studies conducted with selected electrical and electromagnetic methods in the Kondratowa Valley in the Tatra Mountains (the Carpathian Mountains, Poland) are presented in the article. The surveys were performed with the following methods: electrical resistivity tomography (ERT), georadar (GPR) and conductivity meter (CM). The objective of the noninvasive geophysical measurements was to determine the thickness of the Quaternary postglacial sediments that fill the bottom of the valley and to designate the accumulation of boulders deposited on Quaternary sediments. The results of ERT surveys conducted along the axis of the valley allowed to determine the changeability of the thickness of the postglacial sediments and allowed to designate a few areas of occurrence of boulders. The ERT, GPR and CM surveys conducted across the valley allowed to designate with high accuracy the thickness of the accumulation of boulders sliding down the valley bottom from the couloirs surrounding the valley.

  3. Land-use and land-cover change shape the sustainability and impacts of protected areas.

    Science.gov (United States)

    Tesfaw, Anteneh T; Pfaff, Alexander; Golden Kroner, Rachel E; Qin, Siyu; Medeiros, Rodrigo; Mascia, Michael B

    2018-02-27

    Protected areas (PAs) remain the dominant policy to protect biodiversity and ecosystem services but have been shown to have limited impact when development interests force them to locations with lower deforestation pressure. Far less known is that such interests also cause widespread tempering, reduction, or removal of protection [i.e., PA downgrading, downsizing, and degazettement (PADDD)]. We inform responses to PADDD by proposing and testing a bargaining explanation for PADDD risks and deforestation impacts. We examine recent degazettements for hydropower development and rural settlements in the state of Rondônia in the Brazilian Amazon. Results support two hypotheses: ( i ) ineffective PAs (i.e., those where internal deforestation was similar to nearby rates) were more likely to be degazetted and ( ii ) degazettement of ineffective PAs caused limited, if any, additional deforestation. We also report on cases in which ineffective portions were upgraded. Overall our results suggest that enhancing PAs' ecological impacts enhances their legal durability.

  4. A neonatal screening of congenital hypothyroidism covered 266 401 cases in Tianjin area

    International Nuclear Information System (INIS)

    Fang Peihua; Lv Mei; Huang Guangyu; Yuan Chengyun; Xu Jing; Yang Qingyan; Wang Xiuying; Ma Xiancheng; Liu Geli; Chen Kunming; Zhang Moling

    2003-01-01

    Objective: To observe the incidence, the curative rate and the long term prognosis of congenital hypothyroidism (CH) newborns detected by screening program in Tianjin area initiated at the beginning of 1982. Methods: Primarily, the T 4 and thyroid-stimulating hormone (TSH) radioimmunoassay (RIA) of dried blood sample on filter paper developed in our laboratory were used. The TSH RIA was replaced by a time-resolved fluorescence immunoassay (Tr-FIA) in 1998. The primary T 4 RIA was replaced by a commercial kit for T 4 RIA in 1999. SPECT imaging on thyroid was performed after intravenous administration of 99 Tc m O 4 - 11.1-18.5 MBq. Results: A total of 266 401 neonates was screened for CH in our laboratory in Tianjin area. 36 cases of permanent CH were confirmed in the program. The incidence of CH was 0.014%; 22 cases of CH here were kept in treatment . Of the 22 cases, 19 cases were recalled in 2000, 18 of them (94.7%) showed currently with normal growth and development in the check-up. Imaging on thyroid ( 99 Tc m ): among 19 patients with CH, 1 case was found with normal gland, 1 with a hypogenetic thyroid, 3 cases with enlarged thyroid, 7 with ectopic gland, and the remaining 7 cases didn't show any image of thyroid. The bone age of 20 CH children was evaluated with the X ray radiography. In 6 cases of them, the bone age was normal, and 7 cases had progressed from development delay to normal. So far, retarded bone age of the remaining 7 CH patients didn't show any renewing yet. The bone age renewal was found in 3 younger children of them, but for the other 3 cases (9-12 years old) of CH patients with thyroid gland absence, the renewal of bone age was slower. Intelligence quotient (IQ) in 16 cases was measured. The scores of IQ in 13 cases of them (81.3%) were 80-119, 2 cases 72-77, 1 case 60. IQs of 6/16 cases of CH patients with thyroid absence were lower. May be it related to that, their hypothyroidism during fetal life was severer. Conclusions: Neonatal

  5. The Analysis of Land Use Based on CORINE Land Cover in the Romanian Part of the Tisa Catchment Area

    Directory of Open Access Journals (Sweden)

    CIPRIAN MOLDOVAN

    2010-01-01

    Full Text Available The analysis of the land use structure of the 13 counties of the Romanian part of Tisa catchment area has been made according to the 2000 edition of CORINE Land Cover, while the 1990 edition has been used for comparative purposes. Out of the total area of 8,269,229.48 hectares, the forests cover 37.92%, the arable lands 35.02% and the grasslands 17.97%. The other types of land use have lower weights, such as the continuous and discontinuous urban fabric 4.81%, the orchards 1.10% and the vineyards 0.98%. In the category of forests, the following types of land use are included: broad-leaved forests, which form the majority (24.72%, coniferous forests (6.22%, mixed forests (3.46% and transitional woodland-shrub areas (3.52%. The forests are mainly located in the Carpathians and the hills. The non-irrigated arable lands (23.50% are predominant within the arable lands. They lie mostly in the Western Plain and in the basins and corridors of the Transylvanian Depression and the Western Hills. The analysis of the dynamics of the land use structure between 1990 and 2000 indicates a relative stability in the case of forests, a decrease of arable lands and an increase of grasslands.

  6. Radioactive Tank Waste Remediation Focus Area. Technology summary

    International Nuclear Information System (INIS)

    1995-06-01

    In February 1991, DOE's Office of Technology Development created the Underground Storage Tank Integrated Demonstration (UST-ID), to develop technologies for tank remediation. Tank remediation across the DOE Complex has been driven by Federal Facility Compliance Agreements with individual sites. In 1994, the DOE Office of Environmental Management created the High Level Waste Tank Remediation Focus Area (TFA; of which UST-ID is now a part) to better integrate and coordinate tank waste remediation technology development efforts. The mission of both organizations is the same: to focus the development, testing, and evaluation of remediation technologies within a system architecture to characterize, retrieve, treat, concentrate, and dispose of radioactive waste stored in USTs at DOE facilities. The ultimate goal is to provide safe and cost-effective solutions that are acceptable to both the public and regulators. The TFA has focused on four DOE locations: the Hanford Site in Richland, Washington, the Idaho National Engineering Laboratory (INEL) near Idaho Falls, Idaho, the Oak Ridge Reservation in Oak Ridge, Tennessee, and the Savannah River Site (SRS) in Aiken, South Carolina

  7. New Products and Technologies, Based on Calculations Developed Areas

    Directory of Open Access Journals (Sweden)

    Gheorghe Vertan

    2013-09-01

    Full Text Available Following statistics, currently prosperous and have high GDP / capita, only countries that have and fructify intensively large natural resources and/or produce and export products massive based on patented inventions accordingly. Without great natural wealth and the lowest GDP / capita in the EU, Romania will prosper only with such products. Starting from the top experience in the country, some patented, can develop new and competitive technologies and patentable and exportable products, based on exact calculations of developed areas, such as that double shells welded assemblies and plating of ships' propellers and blade pump and hydraulic turbines.

  8. Laser Scanning Technology as Part of a Comprehensive Condition Assessment for Covered Bridges

    Science.gov (United States)

    Brian K. Brashaw; Samuel Anderson; Robert J. Ross

    2015-01-01

    New noncontact technologies have been developed and implemented for determining as-built condition and current dimensions for a wide variety of objects and buildings. In this study, a three-dimensional laser scanner was used to determine the dimensions and visual condition of a historic bridge in the Amnicon Falls State Park in northern Wisconsin. 3D scanning provides...

  9. Migration and Enrichment of Arsenic in the Rock-Soil-Crop Plant System in Areas Covered with Black Shale, Korea

    Directory of Open Access Journals (Sweden)

    Ji-Min Yi

    2003-01-01

    Full Text Available The Okchon black shale, which is part of the Guryongsan Formation or the Changri Formation of Cambro-Ordovician age in Korea provides a typical example of natural geological materials enriched with potentially toxic elements such as U, V, Mo, As, Se, Cd, and Zn. In this study, the Dukpyung and the Chubu areas were selected to investigate the migration and enrichment of As and other toxic elements in soils and crop plants in areas covered with black shale. Rock and soil samples digested in 4-acid solution (HCl+HNO3+HF+HClO4 were analyzed for As and other heavy metals by ICP-AES and ICP-MS, and plant samples by INAA. Mean concentration of As in Okchon black shale is higher than those of both world average values of shale and black shale. Especially high concentration of 23.2 mg As kg-1 is found in black shale from the Dukpyung area. Mean concentration of As is highly elevated in agricultural soils from the Dukpyung (28.2 mg kg-1 and the Chubu areas (32.6 mg kg-1. As is highly elevated in rice leaves from the Dukpyung (1.14 mg kg-1 and the Chubu areas (1.35 mg kg-1. The biological absorption coefficient (BAC of As in plant species decreases in the order of rice leaves > corn leaves > red pepper = soybean leaves = sesame leaves > corn stalks > corn grains. This indicates that leafy plants tend to accumulate As from soil to a greater degree than cereal products such as grains.

  10. Impacts on the Urban Environment: Land Cover Change Trajectories and Landscape Fragmentation in Post-War Western Area, Sierra Leone

    Directory of Open Access Journals (Sweden)

    Solomon Peter Gbanie

    2018-01-01

    Full Text Available An influential underlying driver of human-induced landscape change is civil war and other forms of conflict that cause human displacement. Internally displaced persons (IDPs increase environmental pressures at their destination locations while reducing them at their origins. This increased pressure presents an environment for increased land cover change (LCC rates and landscape fragmentation. To test whether this hypothesis is correct, this research sought to understand LCC dynamics in the Western Area of Sierra Leone from 1976 to 2011, a period including pre-conflict, conflict, and post-conflict eras, using Landsat and SPOT satellite imagery. A trajectory analysis of classified images compared LCC trajectories before and during the war (1976–2000 with after the war (2003–2011. Over the 35-year period, the built-up land class rapidly increased, in parallel with an increase in urban and peri-urban agriculture. During the war, urban and peri-urban agriculture became a major livelihood activity for displaced rural residents to make the region food self-sufficient, especially when the war destabilised food production activities. The reluctance of IDPs to return to their rural homes after the war caused an increased demand for land driven by housing needs. Meanwhile, protected forest and other forest declined. A significant finding to emerge from this research is that landscape fragmentation increased in conjunction with declining forest cover while built-up areas aggregated. This has important implications for the region’s flora, fauna, and human populations given that other research has shown that landscape fragmentation affects the landscape’s ability to provide important ecosystem services.

  11. Identifying systematic land-cover transitions using remote sensing and GIS: the fate of forests inside and outside protected areas of Southwestern Ghana

    OpenAIRE

    Clement Aga Alo; Robert Gilmore Pontius Jr

    2008-01-01

    We use remote sensing and GIS to map changes in land cover and to identify systematic land-cover transitions in Southwestern Ghana. Landsat Thematic Mapper satellite imagery of 1990 and 2000 is used to create two land-cover classifications, and the two maps are then compared to produce transition matrices both for protected and for unprotected areas. These matrices are analyzed according to their various components to identify systematic landscape transitions based on deviations between the t...

  12. Going beyond the green: senesced vegetation material predicts basal area and biomass in remote sensing of tree cover conditions in an African tropical dry forest (miombo woodland) landscape

    Science.gov (United States)

    Mayes, Marc; Mustard, John; Melillo, Jerry; Neill, Christopher; Nyadzi, Gerson

    2017-08-01

    In sub-Saharan Africa (SSA), tropical dry forests and savannas cover over 2.5 million km2 and support livelihoods for millions in fast-growing nations. Intensifying land use pressures have driven rapid changes in tree cover structure (basal area, biomass) that remain poorly characterized at regional scales. Here, we posed the hypothesis that tree cover structure related strongly to senesced and non-photosynthetic (NPV) vegetation features in a SSA tropical dry forest landscape, offering improved means for satellite remote sensing of tree cover structure compared to vegetation greenness-based methods. Across regrowth miombo woodland sites in Tanzania, we analyzed relationships among field data on tree structure, land cover, and satellite indices of green and NPV features based on spectral mixture analyses and normalized difference vegetation index calculated from Landsat 8 data. From satellite-field data relationships, we mapped regional basal area and biomass using NPV and greenness-based metrics, and compared map performances at landscape scales. Total canopy cover related significantly to stem basal area (r 2 = 0.815, p  60%) at all sites. From these two conditions emerged a key inverse relationship: skyward exposure of NPV ground cover was high at sites with low tree basal area and biomass, and decreased with increasing stem basal area and biomass. This pattern scaled to Landsat NPV metrics, which showed strong inverse correlations to basal area (Pearson r = -0.85, p forests.

  13. Evaluation of DGVMs in tropical areas: linking patterns of vegetation cover, climate and fire to ecological processes

    Science.gov (United States)

    D'Onofrio, Donatella; von Hardenberg, Jost; Baudena, Mara

    2017-04-01

    Many current Dynamic Global Vegetation Models (DGVMs), including those incorporated into Earth System Models (ESMs), are able to realistically reproduce the distribution of the most worldwide biomes. However, they display high uncertainty in predicting the forest, savanna and grassland distributions and the transitions between them in tropical areas. These biomes are the most productive terrestrial ecosystems, and owing to their different biogeophysical and biogeochemical characteristics, future changes in their distributions could have also impacts on climate states. In particular, expected increasing temperature and CO2, modified precipitation regimes, as well as increasing land-use intensity could have large impacts on global biogeochemical cycles and precipitation, affecting the land-climate interactions. The difficulty of the DGVMs in simulating tropical vegetation, especially savanna structure and occurrence, has been associated with the way they represent the ecological processes and feedbacks between biotic and abiotic conditions. The inclusion of appropriate ecological mechanisms under present climatic conditions is essential for obtaining reliable future projections of vegetation and climate states. In this work we analyse observed relationships of tree and grass cover with climate and fire, and the current ecological understanding of the mechanisms driving the forest-savanna-grassland transition in Africa to evaluate the outcomes of a current state-of-the-art DGVM and to assess which ecological processes need to be included or improved within the model. Specifically, we analyse patterns of woody and herbaceous cover and fire return times from MODIS satellite observations, rainfall annual average and seasonality from TRMM satellite measurements and tree phenology information from the ESA global land cover map, comparing them with the outcomes of the LPJ-GUESS DGVM, also used by the EC-Earth global climate model. The comparison analysis with the LPJ

  14. Optimizing land cover change detection using combined pixel-based and object-based image classification in a mountainous area in Mexico

    NARCIS (Netherlands)

    Aguirre Gutiérrez, J.; Seijmonsbergen, A.C.; Duivenvoorden, J.; Epiphanio, J.C.N.; Galvão, L.S.; dos Campos, S.J.

    2011-01-01

    Inventories of past and present land cover changes form the basis for future conservation strategies and landscape management. In this study Landsat images of a mountainous area in Mexico are used in an object-based and pixel-based image classification. The land cover categories with the highest

  15. MONITORING GROUND SUBSIDENCE IN AREAS COVERED BY DENSE VEGETATION USING TERRASAR-X IMAGES: A CASE STUDY OF HANGZHOU

    Directory of Open Access Journals (Sweden)

    H. A. Wu

    2016-06-01

    Full Text Available Hangzhou, the capital of Zhejiang province has suffered serious ground subsidence during the past several decades, due to long term over-exploration of groundwater. In this paper, the time series InSAR technique using high resolution SAR images is investigated for the generation of subsidence maps over Hangzhou region. 29 TerraSAR-X images acquired from May 2012 to Sep 2015 are used. The results show that serious subsidence has mainly taken place in suburban area, including Yuhang district, Xiaoshan district and Binjiang district. 4 subsidence centers are discovered, namely Tangqi town in Yuhang with an average subsiding velocity of -29.6 mm/year, Xintang (-30.7 mm/year in Xiaoshan, Zhujiaqiao town (-25.6mm/year in Xiaoshan, and Miaohouwang town (-30.1mm/year in Binjiang. The urban area is stable and ground rebound even take place in some places. The results are compared with 19 levelling measurements. The RMS error between them is 2.9 mm/year, which demonstrates that the high resolution TerraSAR-X images has good accuracy for subsidence monitoring in the southeast of China, covered by dense vegetation.

  16. Monitoring Ground Subsidence in Areas Covered by Dense Vegetation Using Terrasar-X Images: a Case Study of Hangzhou

    Science.gov (United States)

    Wu, H. A.; Zhang, Y. H.; Luo, G. F.; Kang, Y. K.; Zhu, Y. M.

    2016-06-01

    Hangzhou, the capital of Zhejiang province has suffered serious ground subsidence during the past several decades, due to long term over-exploration of groundwater. In this paper, the time series InSAR technique using high resolution SAR images is investigated for the generation of subsidence maps over Hangzhou region. 29 TerraSAR-X images acquired from May 2012 to Sep 2015 are used. The results show that serious subsidence has mainly taken place in suburban area, including Yuhang district, Xiaoshan district and Binjiang district. 4 subsidence centers are discovered, namely Tangqi town in Yuhang with an average subsiding velocity of -29.6 mm/year, Xintang (-30.7 mm/year) in Xiaoshan, Zhujiaqiao town (-25.6mm/year) in Xiaoshan, and Miaohouwang town (-30.1mm/year) in Binjiang. The urban area is stable and ground rebound even take place in some places. The results are compared with 19 levelling measurements. The RMS error between them is 2.9 mm/year, which demonstrates that the high resolution TerraSAR-X images has good accuracy for subsidence monitoring in the southeast of China, covered by dense vegetation.

  17. Mixed Effectiveness of Africa's Tropical Protected Areas for Maintaining Forest Cover: Insights from a Global Forest Change Dataset

    Science.gov (United States)

    De Vos, A.; Bowker, J.; Ament, J.; Cumming, G.

    2016-12-01

    The effectiveness of parks for forest conservation is widely debated in Africa, where increasing human pressure, insufficient funding, and lack of management capacity frequently place significant demands on forest habitats. Tropical forests house a significant portion of the world's remaining biodiversity and are being heavily impacted by anthropogenic activity. We used Hansen et al.'s (2013) global forest change dataset to analyse park effectiveness at the individual (224 parks) and national (23 countries) level across Africa by comparing the extent of forest loss (as a proxy for deforestation) inside parks to matched unprotected control samples. We found that, although significant geographical variation exists between parks, the majority of African parks experienced significantly lower deforestation within their boundaries. Accessibility was a significant driver of deforestation, with less accessible areas having a higher probability of forest loss in ineffective parks and more accessible areas having a higher probability of forest loss in effective parks. Smaller parks were less effective at preventing forest loss inside park boundaries than larger parks, and older parks were less effective than younger parks. Our analysis, which is the first individual and national assessment of park effectiveness across Africa, demonstrates the complexity of factors influencing the ability of a park to curb deforestation within its boundaries and highlights the potential of web-based remote sensing technology in monitoring protected area effectiveness.

  18. Land-cover changes and its impacts on ecological variables in the headwaters area of the Yangtze River, China.

    Science.gov (United States)

    Wang, Genxu; Wang, Yibo; Kubota, Jumpei

    2006-09-01

    Land cover changes affect ecological landscape spatial pattern, and evolving landscape patterns inevitably cause an evolution in ecosystem functionality. Various ecological landscape variables, such as biological productivity (plant biomass and stock capacity), soil nutrients (organic matter and N content) and water source conservation capacity are identified as landscape function characteristics. A quantitative method and digital model for analyzing evolving landscape functionality in the headwaters areas of the Yangtze River, China were devised. In the period 1986-2000, patch transitions of the region's evolving landscapes have been predominantly characterized by alpine cold swamp meadow, with the highest coverage tending to be steppified meadow or steppe, and desertification landscape such as sand and bare rock land expansion. As the result of such changes, alpine swamp areas decreased by 3.08 x 10(3) km2 and the alpine cold sparse steppe and bare rock and soil land increased by 6.48 x 10(3) km2 and 5.82 x 10(3) km2, respectively. Consequently, the grass biomass production decreased by 2627.15 Gg, of which alpine cold swamp meadows accounted for 55.9% of this loss. The overall stock capacity of the headwaters area of the Yangtze River decreased by 920.64 thousand sheep units, of which 502.02 thousand sheep units decreased in ACS (Alpine cold swamp) meadow transition. Soil organic matter and N contents decreased significantly in most alpine cold meadow and swamp meadow landscape patches. From 1986 to 2000 the total losses of soil organic matter and total N in the entire headwaters region amounted to 150.2 Gkg and 7.67 Gkg. Meanwhile, the landscape soil water capacity declined by 935.9 Mm3, of which 83.9% occurred in the ACS meadow transition. In the headwater area of the Yangtze River, the complex transition of landscape resulted in sharp eco-environmental deterioration. The main indication for these changes involved the intensity of the climate in this region is

  19. R and D areas for next generation desalination and water purification technologies

    International Nuclear Information System (INIS)

    Raha, A.; Rao, I.S.; Srivastava, V.K.; Tewari, P.K.

    2007-01-01

    By 2020, desalination and water purification technologies are expected to contribute significantly to ensure a safe, sustainable, affordable and adequate water supply. The cost of producing water from the current generation desalination technologies has declined over time at a rate of only approximately 4% per year. So we need to accelerate our research and development (R and D) activities with a near and long term objective for evolution of current generation desalination technology and to create revolutionary next generation advanced desalination and water purification technologies which will offer a promise of step reduction in cost of producing water. There are five broad technological areas-thermal technologies, membrane technologies, alternate technologies, concentrate management technologies, reuse and recycle technologies that encompass the spectrum of desalination technology. In this paper high priority research areas in all the above technologies areas are discussed to make decision about research direction that will help to mitigate our nation's future water supply challenges. (author)

  20. Land use and land cover classification for rural residential areas in China using soft-probability cascading of multifeatures

    Science.gov (United States)

    Zhang, Bin; Liu, Yueyan; Zhang, Zuyu; Shen, Yonglin

    2017-10-01

    A multifeature soft-probability cascading scheme to solve the problem of land use and land cover (LULC) classification using high-spatial-resolution images to map rural residential areas in China is proposed. The proposed method is used to build midlevel LULC features. Local features are frequently considered as low-level feature descriptors in a midlevel feature learning method. However, spectral and textural features, which are very effective low-level features, are neglected. The acquisition of the dictionary of sparse coding is unsupervised, and this phenomenon reduces the discriminative power of the midlevel feature. Thus, we propose to learn supervised features based on sparse coding, a support vector machine (SVM) classifier, and a conditional random field (CRF) model to utilize the different effective low-level features and improve the discriminability of midlevel feature descriptors. First, three kinds of typical low-level features, namely, dense scale-invariant feature transform, gray-level co-occurrence matrix, and spectral features, are extracted separately. Second, combined with sparse coding and the SVM classifier, the probabilities of the different LULC classes are inferred to build supervised feature descriptors. Finally, the CRF model, which consists of two parts: unary potential and pairwise potential, is employed to construct an LULC classification map. Experimental results show that the proposed classification scheme can achieve impressive performance when the total accuracy reached about 87%.

  1. Photonic technology revolution influence on the defence area

    Science.gov (United States)

    Galas, Jacek; Litwin, Dariusz; Błocki, Narcyz; Daszkiewicz, Marek

    2017-10-01

    Revolutionary progress in the photonic technology provides the ability to develop military systems of new properties not possible to obtain with the use of classical technologies. In recent years, this progress has resulted in developing advanced, complex, multifunctional and relatively cheap Photonic Integrated Circuits (PIC) or Hybrid Photonics Circuits (HPC) built of a collection of standardized optical, optoelectronic and photonic components. This idea is similar to the technology of Electronic Integrated Circuits, which has revolutionized the microelectronic market. The novel approach to photonic technology is now revolutionizing the photonics' market. It simplifies the photonics technology and enables creation of technological centers for designing, development and production of advanced optical and photonic systems in the EU and other countries. This paper presents some selected photonic technologies and their impact on such defense systems like radars, radiolocation, telecommunication, and radio-communication systems.

  2. Ensemble-based assimilation of fractional snow-covered area satellite retrievals to estimate the snow distribution at Arctic sites

    Science.gov (United States)

    Aalstad, Kristoffer; Westermann, Sebastian; Vikhamar Schuler, Thomas; Boike, Julia; Bertino, Laurent

    2018-01-01

    With its high albedo, low thermal conductivity and large water storing capacity, snow strongly modulates the surface energy and water balance, which makes it a critical factor in mid- to high-latitude and mountain environments. However, estimating the snow water equivalent (SWE) is challenging in remote-sensing applications already at medium spatial resolutions of 1 km. We present an ensemble-based data assimilation framework that estimates the peak subgrid SWE distribution (SSD) at the 1 km scale by assimilating fractional snow-covered area (fSCA) satellite retrievals in a simple snow model forced by downscaled reanalysis data. The basic idea is to relate the timing of the snow cover depletion (accessible from satellite products) to the peak SSD. Peak subgrid SWE is assumed to be lognormally distributed, which can be translated to a modeled time series of fSCA through the snow model. Assimilation of satellite-derived fSCA facilitates the estimation of the peak SSD, while taking into account uncertainties in both the model and the assimilated data sets. As an extension to previous studies, our method makes use of the novel (to snow data assimilation) ensemble smoother with multiple data assimilation (ES-MDA) scheme combined with analytical Gaussian anamorphosis to assimilate time series of Moderate Resolution Imaging Spectroradiometer (MODIS) and Sentinel-2 fSCA retrievals. The scheme is applied to Arctic sites near Ny-Ålesund (79° N, Svalbard, Norway) where field measurements of fSCA and SWE distributions are available. The method is able to successfully recover accurate estimates of peak SSD on most of the occasions considered. Through the ES-MDA assimilation, the root-mean-square error (RMSE) for the fSCA, peak mean SWE and peak subgrid coefficient of variation is improved by around 75, 60 and 20 %, respectively, when compared to the prior, yielding RMSEs of 0.01, 0.09 m water equivalent (w.e.) and 0.13, respectively. The ES-MDA either outperforms or at least

  3. Ensemble-based assimilation of fractional snow-covered area satellite retrievals to estimate the snow distribution at Arctic sites

    Directory of Open Access Journals (Sweden)

    K. Aalstad

    2018-01-01

    Full Text Available With its high albedo, low thermal conductivity and large water storing capacity, snow strongly modulates the surface energy and water balance, which makes it a critical factor in mid- to high-latitude and mountain environments. However, estimating the snow water equivalent (SWE is challenging in remote-sensing applications already at medium spatial resolutions of 1 km. We present an ensemble-based data assimilation framework that estimates the peak subgrid SWE distribution (SSD at the 1 km scale by assimilating fractional snow-covered area (fSCA satellite retrievals in a simple snow model forced by downscaled reanalysis data. The basic idea is to relate the timing of the snow cover depletion (accessible from satellite products to the peak SSD. Peak subgrid SWE is assumed to be lognormally distributed, which can be translated to a modeled time series of fSCA through the snow model. Assimilation of satellite-derived fSCA facilitates the estimation of the peak SSD, while taking into account uncertainties in both the model and the assimilated data sets. As an extension to previous studies, our method makes use of the novel (to snow data assimilation ensemble smoother with multiple data assimilation (ES-MDA scheme combined with analytical Gaussian anamorphosis to assimilate time series of Moderate Resolution Imaging Spectroradiometer (MODIS and Sentinel-2 fSCA retrievals. The scheme is applied to Arctic sites near Ny-Ålesund (79° N, Svalbard, Norway where field measurements of fSCA and SWE distributions are available. The method is able to successfully recover accurate estimates of peak SSD on most of the occasions considered. Through the ES-MDA assimilation, the root-mean-square error (RMSE for the fSCA, peak mean SWE and peak subgrid coefficient of variation is improved by around 75, 60 and 20 %, respectively, when compared to the prior, yielding RMSEs of 0.01, 0.09 m water equivalent (w.e. and 0.13, respectively. The ES-MDA either

  4. Land cover mapping using lidar data and aerial image and soil fertility degradation assessment for rice production area in Quezon, Nueva Ecija, Philippines

    Science.gov (United States)

    Alberto, R. T.; Damian, G. B.; Camaso, E. E.; Isip, M. F.

    2017-09-01

    Land-cover maps were important for many scientific, ecological and land management purposes and during the last decades, rapid decrease of soil fertility was observed to be due to land use practices such as rice cultivation. High-precision land-cover maps are not yet available in the area which is important in an economy management. To assure accurate mapping of land cover to provide information, remote sensing is a very suitable tool to carry out this task and automatic land use and cover detection. The study did not only provide high precision land cover maps but it also provide estimates of rice production area that had undergone chemical degradation due to fertility decline. Land-cover were delineated and classified into pre-defined classes to achieve proper detection features. After generation of Land-cover map, of high intensity of rice cultivation, soil fertility degradation assessment in rice production area due to fertility decline was created to assess the impact of soils used in agricultural production. Using Simple spatial analysis functions and ArcGIS, the Land-cover map of Municipality of Quezon in Nueva Ecija, Philippines was overlaid to the fertility decline maps from Land Degradation Assessment Philippines- Bureau of Soils and Water Management (LADA-Philippines- BSWM) to determine the area of rice crops that were most likely where nitrogen, phosphorus, zinc and sulfur deficiencies were induced by high dosage of urea and imbalance N:P fertilization. The result found out that 80.00 % of fallow and 99.81% of rice production area has high soil fertility decline.

  5. Clearance of buildings for demolition: ways to clearance on the standing structure for covered surfaces and inaccessible areas

    International Nuclear Information System (INIS)

    Thraenert, S.; Riemann, T.

    2014-01-01

    structure for about half of this area, and until 2014 most of the remaining area will be treated accordingly. However, due to the building design of Wuergassen NPP, not all surfaces are directly accessible to full-area characterization on the standing structure and not all areas can be completely decontaminated in a cost-effective manner. The most prominent structure is the open gap between the turbine foundations and the surrounding turbine building, but similar gaps also exist between the turbine building and, e.g., the reactor building. In addition, the lower basement floors of the RCA buildings consist of several horizontal layers of concrete which, during construction, did not completely bond. As a result, contaminated liquids propagated along the existing boundary surfaces and hot spots up to 100 kBq are now covered by about 0.5 m of low-activity material. For this variety of challenging examples Wuergassen NPP proposed the release process to the competent authority, performed measurements and provided interpretation of the data. The release process is aimed at verifying compliance with the clearance levels on the standing structure. TUV NORD Nuclear is involved in the release process on behalf of the competent authority to expertise the procedure, to supervise the measurements and to review the data evaluation. Regarding the boundary surfaces between two concrete layers it was possible to gain access to the covered surface by fragmenting the upper concrete layer into blocks. The decontaminated surfaces comply with the clearance levels and the decontaminated concrete blocks may remain on site. An existing gap between the turbine building and the reactor building was characterized by using special equipment. It could be shown, that the residual contamination within the gap complies with the clearance levels. If it is not possible to do a complete decontamination according to static reasons, the residual radioactivity can be determined for further use in the dose

  6. Implication of relationship between natural impacts and land use/land cover (LULC) changes of urban area in Mongolia

    Science.gov (United States)

    Gantumur, Byambakhuu; Wu, Falin; Zhao, Yan; Vandansambuu, Battsengel; Dalaibaatar, Enkhjargal; Itiritiphan, Fareda; Shaimurat, Dauryenbyek

    2017-10-01

    Urban growth can profoundly alter the urban landscape structure, ecosystem processes, and local climates. Timely and accurate information on the status and trends of urban ecosystems is critical to develop strategies for sustainable development and to improve the urban residential environment and living quality. Ulaanbaatar city was urbanized very rapidly caused by herders and farmers, many of them migrating from rural places, have played a big role in this urban expansion (sprawl). Today, 1.3 million residents for about 40% of total population are living in the Ulaanbaatar region. Those human activities influenced stronger to green environments. Therefore, the aim of this study is determined to change detection of land use/land cover (LULC) and estimating their areas for the trend of future by remote sensing and statistical methods. The implications of analysis were provided by change detection methods of LULC, remote sensing spectral indices including normalized difference vegetation index (NDVI), normalized difference water index (NDWI) and normalized difference built-up index (NDBI). In addition, it can relate to urban heat island (UHI) provided by Land surface temperature (LST) with local climate issues. Statistical methods for image processing used to define relations between those spectral indices and change detection images and regression analysis for time series trend in future. Remote sensing data are used by Landsat (TM/ETM+/OLI) satellite images over the period between 1990 and 2016 by 5 years. The advantages of this study are very useful remote sensing approaches with statistical analysis and important to detecting changes of LULC. The experimental results show that the LULC changes can image on the present and after few years and determined relations between impacts of environmental conditions.

  7. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Gowariker, Dr Vasant Ranchhod Ph.D. (Birmingham), D.Sc. (h.c.), FNAE. Date of birth: 25 March 1933. Date of death: 2 January 2015. Specialization: Propellant & Rocket Technology, Heat, Mass & Momentum Transfer Phenomena, Sugar Technology and Chemical Fertilizers Last known address: I-101, Vanaraji Heights, ...

  8. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1934 Section: Engineering & Technology. Venkataraman, Tiruvadi Sambasiva FNA 1934-35; Vice President 1934-35. Date of birth: 15 June 1884. Date of death: 18 January 1963. Specialization: Sugarcane Technology. YouTube; Twitter; Facebook; Blog ...

  9. BUILT-UP AREA AND LAND COVER EXTRACTION USING HIGH RESOLUTION PLEIADES SATELLITE IMAGERY FOR MIDRAND, IN GAUTENG PROVINCE, SOUTH AFRICA

    Directory of Open Access Journals (Sweden)

    E. Fundisi

    2017-09-01

    Full Text Available Urban areas, particularly in developing countries face immense challenges such as climate change, poverty, lack of resources poor land use management systems, and week environmental management practices. Mitigating against these challenges is often hampered by lack of data on urban expansion, urban footprint and land cover. To support the recently adopted new urban agenda 2030 there is need for the provision of information to support decision making in the urban areas. Earth observation has been identified as a tool to foster sustainable urban planning and smarter cities as recognized by the new urban agenda, because it is a solution to unavailability of data. Accordingly, this study uses high resolution EO data Pleiades satellite imagery to map and document land cover for the rapidly expanding area of Midrand in Johannesburg, South Africa. An unsupervised land cover classification of the Pleiades satellite imagery was carried out using ENVI software, whereas NDVI was derived using ArcGIS software. The land cover had an accuracy of 85% that is highly adequate to document the land cover in Midrand. The results are useful because it provides a highly accurate land cover and NDVI datasets at localised spatial scale that can be used to support land use management strategies within Midrand and the City of Johannesburg South Africa.

  10. Built-Up Area and Land Cover Extraction Using High Resolution Pleiades Satellite Imagery for Midrand, in Gauteng Province, South Africa

    Science.gov (United States)

    Fundisi, E.; Musakwa, W.

    2017-09-01

    Urban areas, particularly in developing countries face immense challenges such as climate change, poverty, lack of resources poor land use management systems, and week environmental management practices. Mitigating against these challenges is often hampered by lack of data on urban expansion, urban footprint and land cover. To support the recently adopted new urban agenda 2030 there is need for the provision of information to support decision making in the urban areas. Earth observation has been identified as a tool to foster sustainable urban planning and smarter cities as recognized by the new urban agenda, because it is a solution to unavailability of data. Accordingly, this study uses high resolution EO data Pleiades satellite imagery to map and document land cover for the rapidly expanding area of Midrand in Johannesburg, South Africa. An unsupervised land cover classification of the Pleiades satellite imagery was carried out using ENVI software, whereas NDVI was derived using ArcGIS software. The land cover had an accuracy of 85% that is highly adequate to document the land cover in Midrand. The results are useful because it provides a highly accurate land cover and NDVI datasets at localised spatial scale that can be used to support land use management strategies within Midrand and the City of Johannesburg South Africa.

  11. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1934 Section: Engineering & Technology. Foster, R B 1936-40. YouTube · Twitter · Facebook · Blog. Academy News. IAS Logo. Summer Research Fellowship Programme 2018. Dates Extended To 7 ...

  12. Expanding ELSI to all areas of innovative science and technology.

    Science.gov (United States)

    Greenbaum, Dov

    2015-04-01

    New curricula in the study of the ethical, legal and social implications of scientific research aims to further the conversation among all stakeholders in the interactions between science, technology and society.

  13. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1974 Section: Engineering & Technology. Kelkar, Dr Purushottam Kashinath Ph.D. (Liverpool). Date of birth: 1 June 1909. Date of death: 23 October 1990. Specialization: Electrical Engineering. YouTube; Twitter; Facebook; Blog ...

  14. Multitemporal analysis of Landsat images to detect land use land cover changes for monitoring soil sealing in the Nola area (Naples, Italy)

    Science.gov (United States)

    De Giglio, Michaela; Allocca, Maria; Franci, Francesca

    2016-10-01

    Land Use Land Cover Changes (LULCC) data provide objective information to support environmental policy, urban planning purposes and sustainable land development. Understanding of past land use/cover practices and current landscape patterns is critical to assess the effects of LULCC on the Earth system. Within the framework of soil sealing in Italy, the present study aims to assess the LULCC of the Nola area (Naples metropolitan area, Italy), relating to a thirty year period from 1984 to 2015. The urban sprawl affects this area causing the impervious surface increase, the loss in rural areas and landscape fragmentation. Located near Vesuvio volcano and crossed by artificial filled rivers, the study area is subject to landslide, hydraulic and volcanic risks. Landsat time series has been processed by means of the supervised per-pixel classification in order to produce multitemporal Land Use Land Cover maps. Then, post-classification comparison approach has been applied to quantify the changes occurring between 1984 and 2015, also analyzing the intermediate variations in 1999, namely every fifteen years. The results confirm the urban sprawl. The increase of the built-up areas mainly causes the habitat fragmentation and the agricultural land conversion of the Nola area that is already damaged by unauthorized disposal of urban waste. Moreover, considering the local risk maps, it was verified that some of the new urban areas were built over known hazardous sites. In order to limit the soil sealing, urgent measures and sustainable urban planning are required.

  15. Surface lowering of the debris-covered area of Kanchenjunga Glacier in the eastern Nepal Himalaya since 1975, as revealed by Hexagon KH-9 and ALOS satellite observations

    Science.gov (United States)

    Lamsal, Damodar; Fujita, Koji; Sakai, Akiko

    2017-12-01

    This study presents the geodetic mass balance of Kanchenjunga Glacier, one of the largest debris-covered glaciers in the easternmost Nepal Himalaya, which possesses a negative mass balance of -0.18 ± 0.17 m w.e. a-1 for the 1975-2010 study period, estimated using digital elevation models (DEMs) generated from Hexagon KH-9 and ALOS PRISM stereo images. Accurate DEMs, with a relative uncertainty of ±5.5 m, were generated from the intensive and manual editing of triangulated irregular network (TIN) models on a stereo MirrorTM/3D Monitor. The glacier ice-flow velocity field was also calculated using a feature-tracking method that was applied to two ALOS orthoimages taken in 2010. The elevation differences between the two DEMs highlight considerable surface lowering across the debris-covered area, and a slight thickening in the accumulation area of Kanchenjunga Glacier between 1975 and 2010. The magnitude and gradient of surface lowering are similar among the six glacier tributaries, even though they are situated at different elevations, which may reflect variations in the ice-flow velocity field. The pattern of surface lowering correlates well with the ice-flow velocity field over the debris-covered portion of the main tributary, suggesting that the glacier dynamics significantly affect surface lowering by altering the emergence velocity along the glacier, particularly in the compressive ablation area. Surface-lowering patterns partially correspond to the supraglacial pond area fraction of the glacier, with enhanced surface lowering observed in areas that possess a larger pond area fraction. These findings support the hypothesis that supraglacial ponds may intensify ice wastage and play a key role in the heterogeneous surface lowering of debris-covered glaciers. The estimated mass loss of Kanchenjunga Glacier is moderate compared with other debris-covered glaciers in neighboring Himalayan regions, which may be due to the lower pond area fraction of Kanchenjunga

  16. The Effect Of Land Cover/Land Use On Groundwater Resources In Southern Egypt (Luxor Area): Remote Sensing And Field Studies

    International Nuclear Information System (INIS)

    Faid, A.M.; Hinz, E.A.; Montgomery, H.

    2003-01-01

    The impact of land cover/land use on groundwater can be critical. Land cover / land use maps give an early warning for planners and developers to protect groundwater resources from depletion and preserve its sustain ability. These land cover / land use maps can be used for the planning of groundwater development to prevent the deterioration of the aquifer. The Research Institute for Groundwater of Egypt (RIGW) has carried out hydrogeological studies in 1990 to evaluate the potentiality of groundwater in Luxor area in southern Egypt close to the Nile valley. The region is characterized by a rapid and continuous increase in land reclamation and development on the fringes which surround the already heavily cultivated land within the Nile valley. This presented a need for continuous monitoring and information updating over a vast region in a short time and at a reasonable cost. This study illustrates how remote sensing techniques can be effectively used for monitoring changes in land cover / land use in an effort to aid groundwater management. Landsat Thematic Mapper (TM) data collected in 1984 and 2000 were processed and analyzed over the study area to produce land cover/land use maps. The Normalized Difference Vegetation Index (NDVI) technique is used for Landsat TM images of to quantify areas which are covered by vegetation. Results indicated significant increase in cultivated areas. Remote sensing results are compared with iso-piezo metric maps and iso-salinity maps that were produced in 1984 and 2000. Comparison of these maps indicates groundwater depletion and salinity increase from 1984 to 2000. We relate this to the increase of the area being cultivated

  17. Landscape monitoring of post-industrial areas using LiDAR and GIS technology

    Directory of Open Access Journals (Sweden)

    Wężyk Piotr

    2015-06-01

    Full Text Available The quarrying industry is changing the local landscape, forming deep open pits and spoil heaps in close proximity to them, especially lignite mines. The impact can include toxic soil material (low pH, heavy metals, oxidations etc. which is the basis for further reclamation and afforestation. Forests that stand on spoil heaps have very different growth conditions because of the relief (slope, aspect, wind and rainfall shadows, supply of solar energy, etc. and type of soil that is deposited. Airborne laser scanning (ALS technology deliver point clouds (XYZ and derivatives as raster height models (DTM, DSM, nDSM=CHM which allow the reception of selected 2D and 3D forest parameters (e.g. height, base of the crown, cover, density, volume, biomass, etc. The automation of ALS point cloud processing and integrating the results into GIS helps forest managers to take appropriate decisions on silvicultural treatments in areas with failed plantations (toxic soil, droughts on south-facing slopes; landslides, etc. or as regular maintenance. The ISOK country-wide project ongoing in Poland will soon deliver ALS point cloud data which can be successfully used for the monitoring and management of many thousands of hectares of destroyed post-industrial areas which according to the law, have to be afforested and transferred back to the State Forest.

  18. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Singh, Prof. Randhir Ph.D. (Panjab Agr. Univ.), FNASc, FNAAS, FNA. Date of birth: 21 January 1944. Specialization: Plant Biochemistry and Biotechnology Address: Director General, Doon Valley Inst. of Engineering & Technology, Sector 17, New Fire Brigade Station, Outside Jundla Gate, Karnal 132 001, Haryana Contact:

  19. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Ganapathi, Dr Krishnamurthy D.Sc. (Madras), FNA. Date of birth: 18 August 1911. Date of death: 15 October 2004. Specialization: Microbial Biochemistry, Fermentation Technology and Chemotherapy Last known address: c/o Dr L. Sankaran, 5809, Ipswich Road, Bethesda, MD 20814, USA. YouTube; Twitter; Facebook ...

  20. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Fellow Profile. Elected: 1966 Section: Engineering & Technology. Narasimhan, Prof. Rangaswamy M.S. (Caltech), Ph.D. (Indiana), FNA, FNASc. Date of birth: 17 April 1926. Specialization: Computer Sciences Address: CMC Limited, KHR House, 11/2, Palace Road, Bengaluru 560 052. YouTube · Twitter · Facebook · Blog ...

  1. On how much biodiversity is covered in Europe by national protected areas and by the Natura 2000 network: insights from terrestrial vertebrates.

    Science.gov (United States)

    Maiorano, L; Amori, G; Montemaggiori, A; Rondinini, C; Santini, L; Saura, S; Boitani, L

    2015-08-01

    The European Union has made extensive biodiversity conservation efforts with the Habitats and Birds Directives and with the establishment of the Natura 2000 network of protected areas, one of the largest networks of conservation areas worldwide. We performed a gap analysis of the entire Natura 2000 system plus national protected areas and all terrestrial vertebrates (freshwater fish excluded). We also evaluated the level of connectivity of both systems, providing therefore a first estimate of the functionality of the Natura 2000 system as an effective network of protected areas. Together national protected areas and the Natura 2000 network covered more than one-third of the European Union. National protected areas did not offer protection to 13 total gap species (i.e., species not covered by any protected area) or to almost 300 partial gap species (i.e., species whose representation target is not met). Together the Natura 2000 network and national protected areas left 1 total gap species and 121 partial gap species unprotected. The terrestrial vertebrates listed in the Habitats and Birds Directives were relatively well covered (especially birds), and overall connectivity was improved considerably by Natura 2000 sites that act as stepping stones between national protected areas. Overall, we found that the Natura 2000 network represents at continental level an important network of protected areas that acts as a good complement to existing national protected areas. However, a number of problems remain that are mainly linked to the criteria used to list the species in the Habitats and Birds Directives. The European Commission initiated in 2014 a process aimed at assessing the importance of the Birds and Habitats Directives for biodiversity conservation. Our results contribute to this assessment and suggest the system is largely effective for terrestrial vertebrates but would benefit from further updating of the species lists and field management. © 2015 Society for

  2. Object-based land cover classification and change analysis in the Baltimore metropolitan area using multitemporal high resolution remote sensing data

    Science.gov (United States)

    Weiqi Zhou; Austin Troy; Morgan Grove

    2008-01-01

    Accurate and timely information about land cover pattern and change in urban areas is crucial for urban land management decision-making, ecosystem monitoring and urban planning. This paper presents the methods and results of an object-based classification and post-classification change detection of multitemporal high-spatial resolution Emerge aerial imagery in the...

  3. Variation in wood anatomy of species with a distribution covering both rain forest and savanna areas of the Ivory Coast, West-Africa

    NARCIS (Netherlands)

    Outer, den R.W.; Veenendaal, van W.L.H.

    1976-01-01

    The variation in wood anatomy within 30 hardwood species, each with a distribution covering both rain forest and savanna areas of the Ivory Coast, Africa, has been studied. Compared to specimens from the rain forest, material from the savanna tends to have more wood ray tissue (rays are higher,

  4. Calculating and Comparison of Different Vegetation Indices by Using Landsat ETM+ Images to Study Vegetation Cover in Neyshabour Area

    Directory of Open Access Journals (Sweden)

    M. Ghaemi

    2011-01-01

    Full Text Available Abstract Understanding plant cover performance in a region is one of the most important factors in controlling soil fertility and its management. In studying plant cover by using of traditional field data collection methods are difficult and time consuming. Using of GIS data in vegetation cover studies satellite images can be helpful in reducing of time and obtaining more precise information. In this study different aspects were considered to obtain the best composite of different indices and identifying the most suitable parameters. The related bands obtained from tasseled cap, principal components analysis and the calculated indices were also used to evaluate the role and effects of different filters on Landsat ETM+ of Neyshabour region. Regression equation and regression coefficients of different parameters were analyzed and evaluated. Finally the most applicable indices were compared with the classes obtained from image classification. The results showed that mean filter of 3×3 has higher correlation coefficients when digital numbers were compared with field collected data. The indices of MSR,VI5, VI6, VI1, RI, BI1, SI, NDVI,TVI ,NDSI ,SAVI,MND, MSAVI, Complex multiratoو COSRI and also PCA1 and the PCA3 obtained from principal components analyses, brightness and greenness bands received from tasseled cap conversion are providing better recognition and evaluation of plant cover in the region. Keywords: Vegetation indices, Principal components analysis, Tasseled cap, Image classification, Landsat

  5. Novel Surveillance Technologies for Airport Ramp Area Operations, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of the current research is to develop the concept, algorithms and software necessary for enabling a novel surveillance system for airports ramp areas....

  6. Focus Area Science Technology Summer Fellowship (FAST-SF)

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1934 Section: Animal Sciences. John, C C . YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. Summer Research Fellowship Programme 2018 · Focus Area Science ...

  7. SCIENCE AND TECHNOLOGY ACTIVITIES FOR CHROMIUM IN THE 100 AREAS

    Energy Technology Data Exchange (ETDEWEB)

    PETERSEN SW

    2009-07-02

    {sm_bullet} Primary Objective: Protect the Columbia River - Focus is control and treatment of contamination at or near the shoreline, which is influenced by bank storage {sm_bullet} Secondary Objective: Reduce hexavalent chromium to <48 parts per billion (ppb) in aquifer (drinking water standard) - Large plumes with isolated areas of high chromium concentrations (> 40,000 ppb), - Unknown source location(s); probably originating in reactor operation areas

  8. Technology strategy for deepwater and subsea production systems 2008 update; Technology Target Areas; TTA7 - Deep water and subsea prodution technology

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    Executive summary 'Deepwater and Subsea Production Systems' has been identified as one of the eight new Technology Target Areas (TTAs) in Norway's technology strategy for the Oil and Gas sector. This TTA covers deepwater floating production systems, subsea systems (except subsea processing technologies which are addressed by TTA6) and arctic development systems (in both shallow and deepwater). The total hydrocarbon reserves worldwide, which are enabled by the technologies under this TTA exceed 400 billion boe which, itself exceeds the proven reserves of Saudi Arabia. For deepwater developments the long term technical challenge is to develop flexible and adaptive systems which are better able to cope with subsurface uncertainties e.g. compartmentalisation and provide required access to the reservoir to enable successful recovery. More specific medium term challenges relate to developing solutions for harsh environmental conditions such as those offshore Norway and to develop cost effective methods of installing subsea hardware in deep and ultra deep water without requiring expensive crane vessels. For subsea systems the challenge is to develop solutions for ultra deepwater without increasing costs, so that Norway's leading export position in this area can be maintained and strengthened. Considering developments in the arctic, Norwegian industry is already well placed through its familiarity with arctic climate, close relationship with Russia and involvement in Sakhalin II. As we move to water depth beyond about 150m use of Gravity Base Structures (GBS) becomes very expensive or non-feasible and we need to consider other solutions. Subsea-to-beach could be an attractive solution but we need to resolve challenges related to long distance tie backs, flow assurance, uneven terrain, etc. There is also a specific need to develop floating systems capable of drilling and production in an arctic environment. To address the above technical challenges the

  9. Area detectors technology and optics-Relations to nature

    International Nuclear Information System (INIS)

    PeIka, Jerzy B.

    2005-01-01

    Relations between natural vision and the artificial 2D imaging systems are discussed. A variety of animal vision as well as its main functional parts are briefly reviewed and compared with the artificial vision equivalents. An increasing advancement observed in human constructions of imaging devices due to recent rapid progress in science and technology is shown to resemble some sophisticated natural solutions formed by evolution in biological systems. The issues of the similarities and differences between the two kinds of vision are discussed. Main focus is put on optical systems forming the image, with special examples of the imaging systems designed to work in the region of the X-ray radiation. Examples of bio-inspired technological vision devices are presented

  10. Special Technology Area Review on Mixed-Signal Components

    Science.gov (United States)

    2000-04-01

    CMOS. Any other solution using a finite resistivity substrate will suffer from lack of isolation between its various circuit functions, specifically...meet these needs, Mr. Corder noted that XFCB (eXtra Fast Complimentary Bipolar) technology provides transistors resistant to total dose and latchup from...MEMS, mixed signal, physical-to-analog converters, and microwave applications. • Process reproducibility/design simplicity. Example: OPAMP 740. • Cost

  11. [Information technology as a support in the area of education].

    Science.gov (United States)

    Sabanović, Z

    1999-01-01

    Decision Support Systems (DSS) are more and more used and developed, mainly within the management area. It is used at strategic level for global planning and managing the organization; at tactical level for short-term planning, process realization and control. Although many authors state that DSS are used only at global and tactical level, some of them--through practical applications--show that specific DSS can be created in order to support decision in other areas than classical management. Paper describes computer application that efficiently supports organisation of exams at The Department for Medical Informatics of Medical Faculty in Tuzla.

  12. Effects of tourism and globalization on land cover and the influence on the quality of life of Paphos area in Cyprus

    Science.gov (United States)

    Italos, Chrysostomos; Akylas, Evangelos; Hadjimitsis, Diofantos G.

    2014-08-01

    Since 1960 most of the coastal area cites across the Mediterranean Sea concentrates people due mass immigration of people from the rural to urban areas. The extensive tourism development especially across the coastal areas, create demand of infrastructures and new work positions and intensive pressure to the environment. The new spirit of the globalization creates movability of people and goods around the word. The free transfer of people from countries with big population and low economical wealth, which are moved to areas where they can work. All the above generate demands of labor and Paphos is one of these areas where during the last decades was transformed from a small agriculture village in one excellent tourist destination. Across the coastal areas big tourist infrastructure was built and lot of different people travel from all areas around the word especially during the summer months. All these generate continuous changes to the environment, to the people and the society. The globalization of the universe commerce and the free transfer of goods and people modify the community stratification. The inflow of agricultures products from third countries reduces the local production and generates degradation and desertification of the rural areas. The periodical variation of the population of the area during the summer and winter periods affect to the environment. The increment demand of sources (water, energy and food) during the summer months pressurize the coastal strip area. By estimating a ratio of inflows by the outflows of goods, people and services of the study area and a ratio of the tourists by the local population, a general index can by arise which will clarify the effects on the environment on the study area. This paper presents the results obtained by this study by examining the effects of tourism on land cover and effects on quality of life for the Paphos area in Cyprus. The authors explores the potential of blending in the sustainability study the

  13. Investigation the Vertical Distribution of Leaf Area and Dry Matter of Sweet Basil (Ocimum basilicum L., Borage (Borago officinalis L. and Cover Crops in Competition with Weeds

    Directory of Open Access Journals (Sweden)

    zeinab shirzadi margavi

    2017-10-01

    Full Text Available Introduction Distribution of leaf area and dry matter are the effective factors that influence on absorption the radiation, evaporation and transpiration of canopy and eventually dry matter accumulation and grain yield in plants. Plant canopy is the spatial arrangement of shoots in a plant population. In plant canopy, leaves are responsible for radiation absorption and gas exchange with the outside. Stem and branches arrange photosynthetic organs somehow, which gas exchange and light distribution best done. The effect of canopy structure on gas exchange and absorption of radiation in plant communities caused detailed study of the canopy structure to be more important. Materials and methods In order to investigate the vertical distribution of leaf area and dry matter of borage and sweet basil in competition with weeds by cover crops treatments, a field experiment was carried out in a randomized complete block design with 8 treatments and 3 replications in Agricultural Sciences and Natural Resources University of Sari in 2013. Treatments were cover crops mung bean (Vigna radiata L. and Persian clover (Trifolium resupinatum L. in the rows between the sweet basil (Ocimum basilicum L. and borage (Borago officinalis L.. Moreover, in order to evaluate the effectiveness of cover crops to control weeds, pure stand of sweet basil and borage in terms of weeding and no weed controls per replicates were used. Each plot was included 5 rows of medicinal plants. Cover crop inter-seeded simultaneously in the main crop. Estimation of leaf area and dry matter of each plant in different canopy layers (0-20, 20-40, 40-60, 80.100, 100-120 and 120-140 cm were done after 75 planting days, with 1 m × 1 m quadrate per plot. For this purpose a vertical card board frame marked in 20-cm increments was used in the field as a guide to cut standing plants (crops, cover crops and weeds into 20-cm strata increments (Mosier & Oliver, 1995. All samples were transferred to the

  14. Local area networks an introduction to the technology

    CERN Document Server

    McNamara, John E

    1985-01-01

    This concise book provides an objective introduction to local area networks - how they work, what they do, and how you can benefit from them. It outlines the pros and cons of the most common configurations so you can evaluate them in light of your own needs. You'll also learn about network software, with special emphasis on the ISO layered model of communications protocols.

  15. Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

    Energy Technology Data Exchange (ETDEWEB)

    Kirwan-Taylor, H.; McCabe, G.H. [Battelle Seattle Research Center, WA (United States); Lesperance, A. [Pacific Northwest National Lab., Richland, WA (United States); Kauffman, J.; Serie, P.; Dressen, L. [EnvironIssues (United States)

    1996-09-01

    The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area`s (SCFA) External Integration Team (EIT) in supporting DOE`s technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders.

  16. Comparative analysis of the application of different Low Power Wide Area Network technologies in power grid

    Science.gov (United States)

    Wang, Hao; Sui, Hong; Liao, Xing; Li, Junhao

    2018-03-01

    Low Power Wide Area Network (LPWAN) technologies developed rapidly in recent years, but the application principle of different LPWAN technologies in power grid is still not clear. This paper gives a comparative analysis of two mainstream LPWAN technologies including NB-IoT and LoRa, and gives an application suggestion of these two LPWAN technologies, which can guide the planning and construction of LPWAN in power grid.

  17. Estimation of Land Surface Temperature for the Quantitative Analysis of Land Cover of Lower Areas of Sindh to Assess the Impacts of Climate Variability

    Science.gov (United States)

    Qaisar, Maha

    2016-07-01

    Due to the present land use practices and climate variability, drastic shifts in regional climate and land covers are easily seen and their future reduction and gain are too well predicted. Therefore, there is an increasing need for data on land-cover changes at narrow and broad spatial scales. In this study, a remote sensing-based technique for land-cover-change analysis is applied to the lower Sindh areas for the last decade. Landsat satellite products were analyzed on an alternate yearly basis, from 1990 to 2016. Then Land-cover-change magnitudes were measured and mapped for alternate years. Land Surface Temperature (LST) is one of the critical elements in the natural phenomena of surface energy and water balance at local and global extent. However, LST was computed by using Landsat thermal bands via brightness temperature and a vegetation index. Normalized difference vegetation index (NDVI) was interpreted and maps were achieved. LST reflected NDVI patterns with complexity of vegetation patterns. Along with this, Object Based Image Analysis (OBIA) was done for classifying 5 major classes of water, vegetation, urban, marshy lands and barren lands with significant map layouts. Pakistan Meteorological Department provided the climate data in which rainfall, temperature and air temperature are included. Once the LST and OBIA are performed, overlay analysis was done to correlate the results of LST with OBIA and LST with meteorological data to ascertain the changes in land covers due to increasing centigrade of LST. However, satellite derived LST was also correlated with climate data for environmental analysis and to estimate Land Surface Temperature for assessing the inverse impacts of climate variability. This study's results demonstrate the land-cover changes in Lower Areas of Sindh including the Indus Delta mostly involve variations in land-cover conditions due to inter-annual climatic variability and temporary shifts in seasonality. However it is too concluded

  18. Long-term cover design for low-level radioactive and hazardous waste sites as applied to the Rocky Flats Environmental Technology Site solar evaporation ponds

    International Nuclear Information System (INIS)

    Stenseng, S.E.; Nixon, P.A.

    1996-01-01

    The US Department of Energy (DOE) operated five lined solar evaporation ponds (SEPs) at the Rocky Flats Environmental Technology Site (RFETS) in Jefferson County, Colorado from 1953 until 1986. The SEPs were used primarily to store and evaporate low-level radioactive and hazardous process wastes. Operation of the SEPs has resulted in contamination of the surrounding soils, and may also provide a source of groundwater contamination. The DOE proposes to close the SEPs by consolidating the contaminated material beneath an engineered cover. The primary objective of the closure of such hazardous and radioactive sites is to limit the exposure of the general public to the contaminants for time periods ranging from 100 to 10,000 years. The goal of the SEPs engineered cover is to isolate hazardous and low-level radioactive soils for a minimum of 1,000 years. Since there is currently no existing regulatory design guidance for a 1,000-year engineered cover, the proposed design of the SEPs engineered cover is based on research and testing that has been conducted for many years at various DOE facilities in the US. This paper discusses the main design theories of the proposed engineered cover for the closure of the SEPs, and how the research and test results of these other programs have been used to arrive at the final cover configuration, the material selections, the component layering, layer thicknesses, and the balance and interaction between components to establish an overall effective cover system

  19. Prediction of Post-Closure Water Balance for Monolithic Soil Covers at Waste Disposal Sites in the Greater Accra Metropolitan Area of Ghana

    Directory of Open Access Journals (Sweden)

    Kodwo Beedu Keelson

    2014-04-01

    Full Text Available The Ghana Landfill Guidelines require the provision of a final cover system during landfill closure as a means of minimizing the harmful environmental effects of uncontrolled leachate discharges. However, this technical manual does not provide explicit guidance on the material types or configurations that would be suitable for the different climatic zones in Ghana. The aim of this study was to simulate and predict post-closure landfill cover water balance for waste disposal sites located in the Greater Accra Metropolitan Area using the USGS Thornthwaite monthly water balance computer program. Five different cover soil types were analyzed under using historical climatic data for the metropolis from 1980 to 2001. The maximum annual percolation and evapotranspiration rates for the native soil type were 337 mm and 974 mm respectively. Monthly percolation rates exhibited a seasonal pattern similar to the bimodal precipitation regime whereas monthly evapotranspiration did not. It was also observed that even though soils with a high clay content would be the most suitable option as landfill cover material in the Accra metropolis the maximum thickness of 600 mm recommended in the Ghana Landfill Guidelines do not seem to provide significant reduction in percolation rates into the buried waste mass when the annual rainfall exceeds 700 mm. The findings from this research should provide additional guidance to landfill managers on the specification of cover designs for waste disposal sites with similar climatic conditions.

  20. Exploration and reservoir characterization; Technology Target Areas; TTA2 - Exploration and reservoir characterisation

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    In future, research within exploration and reservoir characterization will play an even more important role for Norway since resources are decreasing and new challenges like deep sea, harsh environment and last but not least environmental issues have to be considered. There are two major fields which have to be addressed within exploration and reservoir characterization: First, replacement of reserves by new discoveries and ultimate field recoveries in mature basins at the Norwegian Continental shelf, e.g. at the Halten Terrace has to be addressed. A wealth of data exists in the more mature areas. Interdisciplinary integration is a key feature of reservoir characterization, where available data and specialist knowledge need to be combined into a consistent reservoir description. A systematic approach for handling both uncertainties in data sources and uncertainties in basic models is needed. Fast simulation techniques are necessary to generate models spanning the event space, covering both underground based and model-based uncertainties. Second, exploration in frontier areas like the Barents Sea region and the deeper Voering Basin has to be addressed. The scarcity of wells in these frontier areas leads to uncertainties in the geological understanding. Basin- and depositional modelling are essential for predicting where source rocks and reservoir rocks are deposited, and if, when and which hydrocarbons are generated and trapped. Predictive models and improved process understanding is therefore crucial to meet these issues. Especially the challenges related to the salt deposits e.g. sub-salt/sub-basalt reservoir definitions in the Nordkapp Basin demands up-front research and technology developments. TTA2 stresses the need to focus on the development of new talents. We also see a strong need to push cooperation as far as possible in the present competitive environment. Projects that may require a substantial financial commitment have been identified. The following

  1. Energy technology monitoring - New areas and in-depth investigations; Technologie-Monitoring - Weitere Bereiche - Vertiefungen

    Energy Technology Data Exchange (ETDEWEB)

    Rigassi, R.; Eicher, H. [Dr. Eicher und Pauli AG, Liestal (Switzerland); Steiner, P.; Ott, W. [Econcept AG, Zuerich (Switzerland)

    2005-07-01

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) presents the results of a project that examined long-term trends in the energy technology area in order to provide information that is to form the basis for political action and the distribution of energy research funding in Switzerland. Energy-technology areas examined include variable-speed electrical drives, ventilation systems for low-energy-consumption buildings, membrane technology and the use of plastics in lightweight automobiles. Examples are quoted and the current state of the appropriate technologies and market aspects are examined. Also, the potential and future developments in the areas listed are looked at. The consequences for energy policy and future developments in the technology-monitoring area are considered.

  2. Engineering Research and Development and Technology thrust area report FY92

    International Nuclear Information System (INIS)

    Langland, R.T.; Minichino, C.

    1993-03-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering

  3. Engineering Research and Development and Technology thrust area report FY92

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R.T.; Minichino, C. [eds.

    1993-03-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering.

  4. In situ testing to determination field-saturated hydraulic conductivity of UMTRA Project disposal cell covers, liners, and foundation areas

    International Nuclear Information System (INIS)

    1994-02-01

    This special study was conducted to prepare a guidance document for selecting in situ hydraulic conductivity (K) tests, comparing in situ testing methods, and evaluating the results of such tests. This report may be used as a practical decision-making tool by the Uranium Mill Tailings Remedial Action (UMTRA) Project staff to determine which testing method will most efficiently achieve the field-saturated K results needed for long-term planning. A detailed section on near-surface test methods discusses each method which may be applicable to characterization of UMTRA disposal cell covers, liners and foundation materials. These potentially applicable test methods include the sealed double-ring infiltrometer (SDRI), the air-entry permeameter (AEP), the guelph permeameter, the two-stage borehole technique (TSB), the pressure infiltrometer, and the disk permeameter. Analytical solutions for these methods are provided, and limitations of these solutions are discussed, and a description of testing equipment design and installation are provided

  5. Assessment of Land Use-Cover Changes and Successional Stages of Vegetation in the Natural Protected Area Altas Cumbres, Northeastern Mexico, Using Landsat Satellite Imagery

    Directory of Open Access Journals (Sweden)

    Uriel Jeshua Sánchez-Reyes

    2017-07-01

    Full Text Available Loss of vegetation cover is a major factor that endangers biodiversity. Therefore, the use of geographic information systems and the analysis of satellite images are important for monitoring these changes in Natural Protected Areas (NPAs. In northeastern Mexico, the Natural Protected Area Altas Cumbres (NPAAC represents a relevant floristic and faunistic patch on which the impact of loss of vegetation cover has not been assessed. This work aimed to analyze changes of land use and coverage (LULCC over the last 42 years on the interior and around the exterior of the area, and also to propose the time of succession for the most important types of vegetation. For the analysis, LANDSAT satellite images from 1973, 1986, 2000, 2005 and 2015 were used, they were classified in seven categories through a segmentation and maximum likelihood analysis. A cross-tabulation analysis was performed to determine the succession gradient. Towards the interior of the area, a significant reduction of tropical vegetation and, to a lesser extent, temperate forests was found, as well as an increase in scrub cover from 1973 to 2015. In addition, urban and vegetation-free areas, as well as modified vegetation, increased to the exterior. Towards the interior of the NPA, the processes of perturbation and recovery were mostly not linear, while in the exterior adjacent area, the presence of secondary vegetation with distinct definite time of succession was evident. The analysis carried out is the first contribution that evaluates LULCC in this important NPA of northeastern Mexico. Results suggest the need to evaluate the effects of these modifications on species.

  6. Monitoring urban expansion and land use/land cover changes of Shanghai metropolitan area during the transitional economy (1979-2009) in China.

    Science.gov (United States)

    Yin, Jie; Yin, Zhane; Zhong, Haidong; Xu, Shiyuan; Hu, Xiaomeng; Wang, Jun; Wu, Jianping

    2011-06-01

    This study explored the spatio-temporal dynamics and evolution of land use/cover changes and urban expansion in Shanghai metropolitan area, China, during the transitional economy period (1979-2009) using multi-temporal satellite images and geographic information systems (GIS). A maximum likelihood supervised classification algorithm was employed to extract information from four landsat images, with the post-classification change detection technique and GIS-based spatial analysis methods used to detect land-use and land-cover (LULC) changes. The overall Kappa indices of land use/cover change maps ranged from 0.79 to 0.89. Results indicated that urbanization has accelerated at an unprecedented scale and rate during the study period, leading to a considerable reduction in the area of farmland and green land. Findings further revealed that water bodies and bare land increased, obviously due to large-scale coastal development after 2000. The direction of urban expansion was along a north-south axis from 1979 to 2000, but after 2000 this growth changed to spread from both the existing urban area and along transport routes in all directions. Urban expansion and subsequent LULC changes in Shanghai have largely been driven by policy reform, population growth, and economic development. Rapid urban expansion through clearing of vegetation has led to a wide range of eco-environmental degradation.

  7. Tracking Land Use/Land Cover Dynamics in Cloud Prone Areas Using Moderate Resolution Satellite Data: A Case Study in Central Africa

    Directory of Open Access Journals (Sweden)

    Bikash Basnet

    2015-05-01

    Full Text Available Tracking land surface dynamics over cloud prone areas with complex mountainous terrain is an important challenge facing the Earth Science community. One such region is the Lake Kivu region in Central Africa. We developed a processing chain to systematically monitor the spatio-temporal land use/land cover dynamics of this region over the years 1988, 2001, and 2011 using Landsat data, complemented by ancillary data. Topographic compensation was performed on Landsat reflectances to avoid the strong illumination angle impacts and image compositing was used to compensate for frequent cloud cover and thus incomplete annual data availability in the archive. A systematic supervised classification was applied to the composite Landsat imagery to obtain land cover thematic maps with overall accuracies of 90% and higher. Subsequent change analysis between these years found extensive conversions of the natural environment as a result of human related activities. The gross forest cover loss for 1988–2001 and 2001–2011 period was 216.4 and 130.5 thousand hectares, respectively, signifying significant deforestation in the period of civil war and a relatively stable and lower deforestation rate later, possibly due to conservation and reforestation efforts in the region. The other dominant land cover changes in the region were aggressive subsistence farming and urban expansion displacing natural vegetation and arable lands. Despite limited data availability, this study fills the gap of much needed detailed and updated land cover change information for this biologically important region of Central Africa. These multi-temporal datasets will be a valuable baseline for land use managers in the region interested in developing ecologically sustainable land management strategies and measuring the impacts of biodiversity conservation efforts.

  8. Estimating Unbiased Land Cover Change Areas In The Colombian Amazon Using Landsat Time Series And Statistical Inference Methods

    Science.gov (United States)

    Arevalo, P. A.; Olofsson, P.; Woodcock, C. E.

    2017-12-01

    Unbiased estimation of the areas of conversion between land categories ("activity data") and their uncertainty is crucial for providing more robust calculations of carbon emissions to the atmosphere, as well as their removals. This is particularly important for the REDD+ mechanism of UNFCCC where an economic compensation is tied to the magnitude and direction of such fluxes. Dense time series of Landsat data and statistical protocols are becoming an integral part of forest monitoring efforts, but there are relatively few studies in the tropics focused on using these methods to advance operational MRV systems (Monitoring, Reporting and Verification). We present the results of a prototype methodology for continuous monitoring and unbiased estimation of activity data that is compliant with the IPCC Approach 3 for representation of land. We used a break detection algorithm (Continuous Change Detection and Classification, CCDC) to fit pixel-level temporal segments to time series of Landsat data in the Colombian Amazon. The segments were classified using a Random Forest classifier to obtain annual maps of land categories between 2001 and 2016. Using these maps, a biannual stratified sampling approach was implemented and unbiased stratified estimators constructed to calculate area estimates with confidence intervals for each of the stable and change classes. Our results provide evidence of a decrease in primary forest as a result of conversion to pastures, as well as increase in secondary forest as pastures are abandoned and the forest allowed to regenerate. Estimating areas of other land transitions proved challenging because of their very small mapped areas compared to stable classes like forest, which corresponds to almost 90% of the study area. Implications on remote sensing data processing, sample allocation and uncertainty reduction are also discussed.

  9. Information and communication technology platforms deployment: Technology access reaches South African rural areas

    CSIR Research Space (South Africa)

    Foko, TF

    2017-05-01

    Full Text Available including community leaders, trained champions and users of technology. Keywords: Information and communication technology; education, development, Platform, monitoring and evaluation, digital divide, knowledge society and information society. 1...). Platforms were based on principles similar to those demonstrated by the Indian project called the Hole in the Wall whose objective was to show that minimally invasive education (MIE) is a viable form of education (Stillman et al 2012, Mitra, Dangwal et al...

  10. Designing in seismic areas in the third millennium: modern technologies

    International Nuclear Information System (INIS)

    Martelli, Alessandro

    2015-01-01

    in areas hit by even severe earthquakes so far exhibited an excellent behavior, in spite of the fact that the violence of such earthquakes was frequently underestimated [it

  11. In-Space Assembly and Construction Technology Project Summary: Infrastructure Operations Area of the Operations Technology Program

    Science.gov (United States)

    Bush, Harold

    1991-01-01

    Viewgraphs describing the in-space assembly and construction technology project of the infrastructure operations area of the operation technology program are presented. Th objective of the project is to develop and demonstrate an in-space assembly and construction capability for large and/or massive spacecraft. The in-space assembly and construction technology program will support the need to build, in orbit, the full range of spacecraft required for the missions to and from planet Earth, including: earth-orbiting platforms, lunar transfer vehicles, and Mars transfer vehicles.

  12. A/M Area Groundwater Corrective Action Southern Sector Remediation Technology Alternatives Evaluation

    International Nuclear Information System (INIS)

    Looney, B.B.; Phifer, M.A.

    1994-01-01

    Several technologies for clean up of solvents such as trichloroethylene, from groundwater were examined to determine the most reasonable strategy for the southern Sector in A/M Area of Savannah River Site. The most promising options identified were: pump and treat technology, airlift recirculation technology, and bioremediation technology. These options range from baseline/traditional methods to more innovative technologies. The traditional methods would be straightforward to implement, while the innovative methods have the potential to improve efficiency and reduce long term costs

  13. Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

    International Nuclear Information System (INIS)

    Kirwan-Taylor, H.; McCabe, G.H.; Lesperance, A.; Kauffman, J.; Serie, P.; Dressen, L.

    1996-09-01

    The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area's (SCFA) External Integration Team (EIT) in supporting DOE's technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders

  14. The potential of remote sensing for monitoring land cover changes and effects on physical geography in the area of Kayisdagi Mountain and its surroundings (Istanbul).

    Science.gov (United States)

    Geymen, Abdurrahman; Baz, Ibrahim

    2008-05-01

    The effect of land cover change, from natural to anthropogenic, on physical geography conditions has been studied in Kayisdagi Mountain. Land degradation is the most important environmental issue involved in this study. Most forms of land degradation are natural processes accelerated by human activity. Land degradation is a human induced or natural process that negatively affects the ability of land to function effectively within an ecosystem. Environmental degradation from human pressure and land use has become a major problem in the study area because of high population growth, urbanization rate, and the associated rapid depletion of natural resources. When studying the cost of land degradation, it is not possible to ignore the role of urbanization. In particular, a major cause of deforestation is conversion to urban land. The paper reviews the principles of current remote sensing techniques considered particularly suitable for monitoring Kayisdagi Mountain and its surrounding land cover changes and their effects on physical geography conditions. In addition, this paper addresses the problem of how spatially explicit information about degradation processes in the study area rangelands can be derived from different time series of satellite data. The monitoring approach comprises the time period between 1990 and 2005. Satellite remote sensing techniques have proven to be cost effective in widespread land cover changes. Physical geography and particularly natural geomorphologic processes like erosion, mass movement, physical weathering, and chemical weathering features etc. have faced significant unnatural variation.

  15. Mixed waste focus area Department of Energy technology development needs identification and prioritization

    International Nuclear Information System (INIS)

    Roach, J.A.

    1995-11-01

    The Assistant Secretary for the Office of Environmental Management (EM) at the US DOE initiated a new approach in August, 1993 to environmental research and technology development. The key features of this new approach included establishment of five focus areas and three crosscutting technology programs, which overlap the boundaries of the focus areas. The five focus areas include the Contaminant Plumes Containment and Remediation; Mixed Waste Characterization, Treatment, and Disposal; High-Level Waste Tank Remediation, Landfill Stabilization, and Decontamination and Decommissioning Focus Areas. The three crosscutting technologies programs include Characterization, Monitoring, and Sensor Technology; Efficient Separations and Processing; and Robotics. The DOE created the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop and facilitate implementation of technologies required to meet its commitments for treatment of mixed wastes. To accomplish this goal, the technology deficiencies must be identified and categorized, the deficiencies and needs must be prioritized, and a technical baseline must be established that integrates the requirements associated with these needs into the planned and ongoing environmental research and technology development activities supported by the MWFA. These steps are described

  16. MANGROVE FOREST COVER EXTRACTION OF THE COASTAL AREAS OF NEGROS OCCIDENTAL, WESTERN VISAYAS, PHILIPPINES USING LIDAR DATA

    Directory of Open Access Journals (Sweden)

    A. V. Pada

    2016-06-01

    Full Text Available Mangroves have a lot of economic and ecological advantages which include coastal protection, habitat for wildlife, fisheries and forestry products. Determination of the extent of mangrove patches in the coastal areas of the Philippines is therefore important especially in resource conservation, protection and management. This starts with a well-defined and accurate map. LiDARwas used in the mangrove extraction in the different coastal areas of Negros Occidental in Western Visayas, Philippines. Total coastal study area is 1,082.55 km² for the 14 municipalities/ cities processed. Derivatives that were used in the extraction include, DSM, DTM, Hillshade, Intensity, Number of Returns and PCA. The RGB bands of the Orthographic photographs taken at the same time with the LiDAR data were also used as one of the layers during the processing. NDVI, GRVI and Hillshade using Canny Edge Layer were derived as well to produce an enhanced segmentation. Training and Validation points were collected through field validation and visual inspection using Stratified Random Sampling. The points were then used to feed the Support Vector Machine (SVM based on tall structures. Only four classes were used, namely, Built-up, Mangroves, Other Trees and Sugarcane. Buffering and contextual editing were incorporated to reclassify the extracted mangroves. Overall accuracy assessment is at 98.73% (KIA of 98.24% while overall accuracy assessment for Mangroves only is at 98.00%. Using this workflow, mangroves can already be extracted in a large-scale level with acceptable overall accuracy assessments.

  17. Emerging factors associated with the decline of a gray fox population and multi-scale land cover associations of mesopredators in the Chicago metropolitan area.

    Energy Technology Data Exchange (ETDEWEB)

    Willingham, Alison N.; /Ohio State U.

    2008-01-01

    Statewide surveys of furbearers in Illinois indicate gray (Urocyon cinereoargenteus) and red (Vulpes vulpes) foxes have experienced substantial declines in relative abundance, whereas other species such as raccoons (Procyon lotor) and coyotes (Canis latrans) have exhibited dramatic increases during the same time period. The cause of the declines of gray and red foxes has not been identified, and the current status of gray foxes remains uncertain. Therefore, I conducted a large-scale predator survey and tracked radiocollared gray foxes from 2004 to 2007 in order to determine the distribution, survival, cause-specific mortality sources and land cover associations of gray foxes in an urbanized region of northeastern Illinois, and examined the relationships between the occurrence of gray fox and the presence other species of mesopredators, specifically coyotes and raccoons. Although generalist mesopredators are common and can reach high densities in many urban areas their urban ecology is poorly understood due to their secretive nature and wariness of humans. Understanding how mesopredators utilize urbanized landscapes can be useful in the management and control of disease outbreaks, mitigation of nuisance wildlife issues, and gaining insight into how mesopredators shape wildlife communities in highly fragmented areas. I examined habitat associations of raccoons, opossums (Didelphis virginiana), domestic cats (Felis catus), coyotes, foxes (gray and red), and striped skunks (Mephitis mephitis) at multiple spatial scales in an urban environment. Gray fox occurrence was rare and widely dispersed, and survival estimates were similar to other studies. Gray fox occurrence was negatively associated with natural and semi-natural land cover types. Fox home range size increased with increasing urban development suggesting that foxes may be negatively influenced by urbanization. Gray fox occurrence was not associated with coyote or raccoon presence. However, spatial avoidance and

  18. Do High Technology Policies Work?: High Technology Industry Employment Growth in U.S. Metropolitan Areas, 1988-1998

    Science.gov (United States)

    Jenkins, J. Craig; Leicht, Kevin T.; Jaynes, Arthur

    2006-01-01

    Since the 1970s, federal, state and local governments have launched an array of new high technology development programs. Researchers and policy-makers disagree about the relative merits of these policies. We address the effects of seven of these policies on high tech industry employment growth in metropolitan statistical areas in the United…

  19. Quality of Life in the Elderly People Covered by Health Centers in the Urban Areas of Markazi Province, Iran

    Directory of Open Access Journals (Sweden)

    Ali Agha nouri

    2012-01-01

    Full Text Available Objectives: To improve quality of life in the elderly through proper plans and active involvement of elderly in their family and community, we should get a lot of information about health-related quality of life because the composition of our population has changed. Infact, the aged population is increasingly growing, that this will, in turn, have an effect on economic progression and well-being in the country. Thus, this study assessed quality of life and its determinants in the people aged 60 years and over living in the urban areas of Central Province. Methods & Materials: This study was a cross-sectional descriptive-analytic survey that included 165 elderly peoples in the urban areas of Markazi Province. Data was obtained via a general and a quality of life (using SF-36 questionnaire. The results were analyzed by Chi-Square, Fisher, independent T-test, ANOVA, Regression, and Pearson correlation coefficient. Results: The average age of the subjects was 70.7 years (men 44.8% and women 55.2%. The mean of total SF-36, physical and mental components' scores were 55.66±22, 51.32±21 and 57.30±25 respectively. Additionally, the mean scores of eight health-related dimensions were as follows: physical functions 56.26±45, role limitations due to physical problems 50.60±27, body pain 51.26±38, general health 45.26±53, vitality 53.24±09, social functioning 67.85±27, role limitations due to mental problems 57.14±45 and mental health 62.88±25. Also, the quality of life scores were significantly associated with sex, previous employment, leisure activities, income, current exercising, present disease and drug consumption (P<0.05. Conclusion: Results showed that the elderly's quality of life in the urban areas in Markazi province is in the middle level and the individuals have better mental health compared to physical health. Moreover, various factors are associated with the elderly’s quality of life, which require comprehensive planning for

  20. Assessment of Gari Processing Technologies in Oja-Iya Area of ...

    African Journals Online (AJOL)

    This study was conducted to assess gari processing technologies in Oja-Iya Area of Ilorin West local government area of Kwara State, Nigeria. Data were collected through questionnaire and observation methods. Highest percentages of gari processors procure their raw materials from farmers and market places.

  1. Detailed geomorphological mapping of debris-covered and rock glaciers in the Hólar area, Tröllaskagi Peninsula (northern Iceland).

    Science.gov (United States)

    Tanarro, Luis M.; Palacios, David; Zamorano, Jose J.; Andres, Nuria

    2017-04-01

    Most studies conducted on rock and debris-covered glaciers only include simplified geomorphological maps representing main units (ridges, furrows, front, and thermokarst depressions). The aim of this study is to develop a detailed geomorphological mapping of the Hóladalsjökull debris-covered glacier (65°42' N; 18°57' W) and the Fremri-Grjótárdalur rock glacier (65°43' N 19° W), located near Hólar, a village in the central area of the Trolläskagi peninsula (northern Iceland). The mapping process has been conducted using standard stereo-photointerpretation of aerial photographs and stereo-plotting of a topographic map at 1:2000 scale. Also, landforms have been represented in different transects. Lastly, the geomorphological map has been designed using the elevation digital model, and a 3D pdf file has been generated, allowing for better viewing and understanding the different units and their modelling. The geomorphological mapping of the Hóladalsjökull debris-covered glacier and the Fremri-Grjótárdalur rock glacier represents the prominent walls of their valley heads and their summits, which form a flat highland at 1,200-1,330 metres above sea level, covered by blockfield and patterned ground features. Rockfall and slide landforms are common processes at the foot of these 100-170 metre-high cirque-walls. Debris-covered glaciers and rock glaciers are born right under these walls, building up a spoon-shaped hollow around glacial ice, surrounded by young moraine ridges at their fronts. The dominant features in the Hóladalsjökull debris-covered glacier are large longitudinal ridges and furrows, stretching over 1.5 km in length in the central and western areas. Medium-sized thermokarst depressions (between 15-40 metres in diameter), often running parallel to the furrows, dot the surface of the debris-covered glacier. Parallel alternate ridges and furrows can be seen near the snout. Ridges are rugged and fall around 30-40 metres, with over 30 degree slopes

  2. Land use/land cover change and urban expansion during 1983-2008 in the coastal area of Dakshina Kannada district, South India

    Science.gov (United States)

    Bhagyanagar, Rajagopal; Kawal, Babita M.; Dwarakish, Gowdagere S.; Surathkal, Shrihari

    2012-01-01

    Urban settlements in developing countries are, at present, growing five times as fast as those in developed countries. This paper presents the urban expansion and land use/land cover changes in the fast urbanizing coastal area of the Dakshina Kannada district in Karnataka state, South India, during the years 1983-2008 as a case study. Six Indian Remote Sensing (IRS) satellite images were used in the present work. Supervised classification was carried out using maximum likelihood algorithm. The overall accuracy of the classification varied from 79% to 86.6%, and the kappa statistics varied from 0.761 to 0.850. The results indicate that the urban/built-up area in the study area has almost tripled during the study period. During the same time, the population has increased by 215%. The major driving forces for the urbanization were the enhanced economic activity due to the port and industrialization in the area. The urban/built-up area is projected to increase to 381 km2 and the population in the study area is expected to reach 2.68 million by the year 2028. Urban growth prediction helps urban planners and policymakers provide better infrastructure services to a huge number of new urban residents.

  3. Identification of land cover changes in the coastal area of Dakshina Kannada district, South India during the year 2004–2008

    Directory of Open Access Journals (Sweden)

    J. Jayanth

    2016-06-01

    Full Text Available This study investigates land cover (LC changes in the coastal area of Dakshina Kannada district in the state of Karnataka, South India, during the years 2004–2008 as a case study. IRS P-6, Linear Imaging Self Scanning sensor (LISS-IV satellite images were used in the present work. Classification was carried out using artificial bee colony algorithm and support vector machine (SVM which gave a better result compared to other traditional classification techniques. The best overall classification accuracy for the study area was achieved with an ABC classifier with an OCA of 80.35% for 2004 year data and OCA of 80.40% for 2008 year data, whereas the OCA in SVM, for the same training set is 71.42% for 2004 data and 71.38% for 2008 data on study area 1 and the results were optimised with respect to multispectral data. In study area 2, ABC algorithm achieved an OCA of 78.17% and MLC of 62.63% which was used to check the universality of the classifier. The classification results with post-classification technique for study area 1 indicate that urbanisation in the study area has almost increased twice. During the same time there is an increase in the forest plantation, agricultural plantation and a decrease in crop land and land without scrubs, indicates rapid changes in the coastal environment.

  4. Awareness and using of medical students about mobile health technology in clinical areas.

    Science.gov (United States)

    Ehteshami, Asghar; Hachesu, Peyman Rezaei; Esfahani, Mahtab Kasayi; Rezazadeh, Esmaeil

    2013-01-01

    NONE DECLARED. Necessity of data transmission and getting contact with specialists is so evident in impassable regions. In order to solve such problems, there are different solutions one of which is mobile health technology. Being small and user-friendly, easy to enter data and having low expense are some of its advantages. This study aims to define the association between awareness of medical students in clinical stage about mobile health technology application and the rate of their using this technology in educational hospital of Isfahan in 2011. The study is a cross-sectional analytical application research. Sixty medical students were selected as samples from a society of 240 medical students. A researcher-made questionnaire was used. The questionnaire included 21 multiple choice and 15 yes no questions, which were corrected to reach a score. A researcher-made checklist with 5-fold Likert scale was used to define the rate of applying such technology. The reliability of questionnaire was confirmed through a test-retest. The collected data were analyzed with the help of SPSS software in descriptive and deductive statistics level. The highest percentage of awareness about mobile health technology among medical students in the clinical stage of Azzahra educational hospital is 45.6 in nature areas, and their lowest percentage of awareness is 17.8 in the infrastructure area. In addition, their mean awareness of all areas is 54.4. The highest percentage of using mobile health technology by medical students is 14.6 in the education area, and their lowest percentage of usage is 6.8 in the treatment area. Their mean usage of all areas is 9.4 as well. The rate of awareness and application of mobile health technology is not favorable. Except for treatment, there is no significant association between the rate of awareness and application of mobile health technology.

  5. Differences and similarities of energy innovation systems – comparison of five technology areas in Denmark

    DEFF Research Database (Denmark)

    Borup, Mads

    2016-01-01

    This paper presents a study of the energy innovation systems concerning five technology areas in Denmark: biomass energy, wind power, solar cells, fuel cells & hydrogen and energy efficiency technology. The study shows that the characteristics of the innovation systems differ significantly between...... the areas amongst other things concerning actor landscapes, market formations, and patterns of learning and interaction. This is despite the common context of Danish society and Danish energy systems, policy and institutions. An increase in maturity has appeared in some of the areas over the latest decades......, including the significance of the international dimension and the relationships to the established energy sector and incumbents....

  6. Meteorological and air quality impacts of increased urban albedo and vegetative cover in the Greater Toronto Area, Canada; FINAL

    International Nuclear Information System (INIS)

    Taha, Haider; Hammer, Hillel; Akbari, Hashem

    2002-01-01

    The study described in this report is part of a project sponsored by the Toronto Atmospheric Fund, performed at the Lawrence Berkeley National Laboratory, to assess the potential role of surface property modifications on energy, meteorology, and air quality in the Greater Toronto Area (GTA), Canada. Numerical models were used to establish the possible meteorological and ozone air-quality impacts of increased urban albedo and vegetative fraction, i.e., ''cool-city'' strategies that can mitigate the urban heat island (UHI), significantly reduce urban energy consumption, and improve thermal comfort, particularly during periods of hot weather in summer. Mitigation is even more important during critical heat wave periods with possible increased heat-related hospitalization and mortality. The evidence suggests that on an annual basis cool-city strategies are beneficial, and the implementation of such measures is currently being investigated in the U.S. and Canada. We simulated possible scenari os for urban heat-island mitigation in the GTA and investigated consequent meteorological changes, and also performed limited air-quality analysis to assess related impacts. The study was based on a combination of mesoscale meteorological modeling, Lagrangian (trajectory), and photochemical trajectory modeling to assess the potential meteorological and ozone air-quality impacts of cool-city strategies. As available air-quality and emissions data are incompatible with models currently in use at LBNL, our air-quality analysis was based on photochemical trajectory modeling. Because of questions as to the accuracy and appropriateness of this approach, in our opinion this aspect of the study can be improved in the future, and the air-quality results discussed in this report should be viewed as relatively qualitative. The MM5 meteorological model predicts a UHI in the order of 2 to 3 degrees C in locations of maxima, and about 1 degree C as a typical value over most of the urban area

  7. Meteorological and air quality impacts of increased urban albedo and vegetative cover in the Greater Toronto Area, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Taha, Haider; Hammer, Hillel; Akbari, Hashem

    2002-04-30

    The study described in this report is part of a project sponsored by the Toronto Atmospheric Fund, performed at the Lawrence Berkeley National Laboratory, to assess the potential role of surface property modifications on energy, meteorology, and air quality in the Greater Toronto Area (GTA), Canada. Numerical models were used to establish the possible meteorological and ozone air-quality impacts of increased urban albedo and vegetative fraction, i.e., ''cool-city'' strategies that can mitigate the urban heat island (UHI), significantly reduce urban energy consumption, and improve thermal comfort, particularly during periods of hot weather in summer. Mitigation is even more important during critical heat wave periods with possible increased heat-related hospitalization and mortality. The evidence suggests that on an annual basis cool-city strategies are beneficial, and the implementation of such measures is currently being investigated in the U.S. and Canada. We simulated possible scenari os for urban heat-island mitigation in the GTA and investigated consequent meteorological changes, and also performed limited air-quality analysis to assess related impacts. The study was based on a combination of mesoscale meteorological modeling, Lagrangian (trajectory), and photochemical trajectory modeling to assess the potential meteorological and ozone air-quality impacts of cool-city strategies. As available air-quality and emissions data are incompatible with models currently in use at LBNL, our air-quality analysis was based on photochemical trajectory modeling. Because of questions as to the accuracy and appropriateness of this approach, in our opinion this aspect of the study can be improved in the future, and the air-quality results discussed in this report should be viewed as relatively qualitative. The MM5 meteorological model predicts a UHI in the order of 2 to 3 degrees C in locations of maxima, and about 1 degree C as a typical value over most

  8. Financial evaluation of the integration of satellite technology for snow cover measurements at a hydroelectric plant. (Utilization of Radarsat I in the La Grande river basin, Quebec)

    International Nuclear Information System (INIS)

    Martin, D.; Bernier, M.; Sasseville, J.L.; Charbonneau, R.

    1999-01-01

    The emergence, on the markets, of new technologies evokes, for the potential users, a lot of questions concerning the implementation and operation costs associated with these technologies. Nevertheless, for a lot of users, costs should be considered with the benefits these technologies are able to generate. The benefit-cost analysis is a useful tool for a financial evaluation of the transferability of the technology. This method has been selected to evaluate the eventual implementation of remote sensing technologies for snow cover measurements in the La Grande river basin (Quebec, Canada). Indeed, a better assessment of the snow water equivalent leads to a better forecasting of the water inputs due to the snowmelt. Thus, the improvement of the snow cover monitoring has direct impact on hydroelectric reservoir management. The benefit-cost analysis was used to compare three acquisition modes of the satellite Radarsat 1 (ScanSAR, Wide and Standard). The costs considered for this project are: R and D costs and operations costs (the purchase of images and costs of ground truth measurements). We evaluated the raw benefits on the basis of reducing the standard deviation of predicted inflows. The results show that the ScanSAR mode is the primary remote sensing tool for the monitoring of the snow cover, on an operational basis. With this acquisition mode, the benefit-cost ratios range between 2.3:1 and 3.9:1, using a conservative 4% reduction of the standard deviation. Even if the reduction is only 3%, ScanSAR remains profitable. Due to the large number of images needed to cover all the territory, the Standard and Wide modes are penalized by the purchase and the processing costs of the data and with delays associated to the processing. Nevertheless, with these two modes, it could be possible to work with a partial coverage of the watershed, 75% being covered in 4 days in Wide mod. The estimated B/C ratios (1.5:1 and 2:1) confirm the advantages of this alternative

  9. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II

  10. Using Gridded Snow Covered Area and Snow-Water Equivalence Spatial Data Sets to Improve Snow-Pack Depletion Simulation in a Continental Scale Hydrologic Model

    Science.gov (United States)

    Risley, J. C.; Tracey, J. A.; Markstrom, S. L.; Hay, L.

    2014-12-01

    Snow cover areal depletion curves were used in a continuous daily hydrologic model to simulate seasonal spring snowmelt during the period between maximum snowpack accumulation and total melt. The curves are defined as the ratio of snow-water equivalence (SWE) divided by the seasonal maximum snow-water equivalence (Ai) (Y axis) versus the percent snow cover area (SCA) (X axis). The slope of the curve can vary depending on local watershed conditions. Windy sparsely vegetated high elevation watersheds, for example, can have a steeper slope than lower elevation forested watersheds. To improve the accuracy of simulated runoff at ungaged watersheds, individual snow cover areal depletion curves were created for over 100,000 hydrologic response units (HRU) in the continental scale U.S. Geological Survey (USGS) National Hydrologic Model (NHM). NHM includes the same components of the USGS Precipitation-Runoff-Modeling System (PRMS), except it uses consistent land surface characterization and model parameterization across the U.S. continent. Weighted-mean daily time series of 1-kilometer gridded SWE, from Snow Data Assimilation System (SNODAS), and 500-meter gridded SCA, from Moderate Resolution Imaging Spectroradiometer (MODIS), for 2003-2014 were computed for each HRU using the USGS Geo Data Portal. Using a screening process, pairs of SWE/Ai and SCA from the snowmelt period of each year were selected. SCA values derived from imagery that did not have any cloud cover and were >0 and <100 percent were selected. Unrealistically low and high SCA values that were paired with high and low SWE/Ai ratios, respectively, were removed. Second order polynomial equations were then fit to the remaining pairs of SWE/Ai and SCA to create a unique curve for each HRU. Simulations comparing these new curves with an existing single default curve in NHM will be made to determine if there are significant improvements in runoff.

  11. Forecasting summertime surface temperature and precipitation in the Mexico City metropolitan area: sensitivity of the WRF model to land cover changes

    Science.gov (United States)

    López-Bravo, Clemente; Caetano, Ernesto; Magaña, Víctor

    2018-02-01

    Changes in the frequency and intensity of severe hydrometeorological events in recent decades in the Mexico City Metropolitan Area have motivated the development of weather warning systems. The weather forecasting system for this region was evaluated in sensitivity studies using the Weather Research and Forecasting Model (WRF) for July 2014, a summer time month. It was found that changes in the extent of the urban area and associated changes in thermodynamic and dynamic variables have induced local circulations that affect the diurnal cycles of temperature, precipitation, and wind fields. A newly implemented configuration (land cover update and Four-Dimensional Data Assimilation (FDDA)) of the WRF model has improved the adjustment of the precipitation field to the orography. However, errors related to the depiction of convection due to parameterizations and microphysics remains a source of uncertainty in weather forecasting in this region.

  12. Depositional characteristics of cretaceous cover in Xiangyangshan area of Heilongjiang province and analysis on prospect for sandstone hosted interlayer oxidation zone type uranium deposits

    International Nuclear Information System (INIS)

    Cai Yuqi; Li Shengxiang; Dong Wenming

    2003-01-01

    The depositional systems and characteristics of Cretaceous Cover depositional facies are discussed. In combination with logging curves in Xiangyangshan area, two depositional systems (namely, alluvial fan depositional system and alluvial plain depositional system) and five types of depositional facies are distinguished. Results of detailed research are given for each depositional facies in aspects of lithology, depositional structure, logging curve and grain size distribution pattern. Temporal and spatial distribution features of the depositional facies and the development features of interlayer oxidation zones of the second member of Quantou Formation are analyzed. Finally, conclusions on prospects for sandstone-hosted interlayer oxidation zone type uranium deposits in the study area are given in the aspect of depositional facies. (authors)

  13. Lightweight composite fighting cover prototype development program

    Energy Technology Data Exchange (ETDEWEB)

    Wrenn, G.E. Jr.; Frame, B.J.; Gwaltney, R.C.; Akerman, M.A.

    1996-07-01

    The U.S. Army Field Assistance Science and Technology Program requested Oak Ridge National Laboratory (ORNL) to demonstrate the use of lightweight composite materials in construction of overhead covers for reinforced infantry fighting positions. In recent years, ORNL researchers have designed and tested several concepts for lightweight ballistic protection structures, and they have developed numerous prototype composite structures for military and civilian applications. In the current program, composite panel designs and materials are tested and optimized to meet anticipated static and dynamic load conditions for the overhead cover structure. Ten prototype composite covers were built at ORNL for use in Army field tests. Each composite cover has a nominal surface area of 12 ft[sup 2] and a nominal weight of 8 lb. Four of the prototypes are made with folding sections to improve their handling characteristics. The composite covers exhibit equivalent performance in Army field tests to covers made with conventional materials that weigh four times as much.

  14. Land Cover

    Data.gov (United States)

    Kansas Data Access and Support Center — The Land Cover database depicts 10 general land cover classes for the State of Kansas. The database was compiled from a digital classification of Landsat Thematic...

  15. Using a Mobile Device "App" and Proximal Remote Sensing Technologies to Assess Soil Cover Fractions on Agricultural Fields.

    Science.gov (United States)

    Laamrani, Ahmed; Pardo Lara, Renato; Berg, Aaron A; Branson, Dave; Joosse, Pamela

    2018-02-27

    Quantifying the amount of crop residue left in the field after harvest is a key issue for sustainability. Conventional assessment approaches (e.g., line-transect) are labor intensive, time-consuming and costly. Many proximal remote sensing devices and systems have been developed for agricultural applications such as cover crop and residue mapping. For instance, current mobile devices (smartphones & tablets) are usually equipped with digital cameras and global positioning systems and use applications (apps) for in-field data collection and analysis. In this study, we assess the feasibility and strength of a mobile device app developed to estimate crop residue cover. The performance of this novel technique (from here on referred to as "app" method) was compared against two point counting approaches: an established digital photograph-grid method and a new automated residue counting script developed in MATLAB at the University of Guelph. Both photograph-grid and script methods were used to count residue under 100 grid points. Residue percent cover was estimated using the app, script and photograph-grid methods on 54 vertical digital photographs (images of the ground taken from above at a height of 1.5 m) collected from eighteen fields (9 corn and 9 soybean, 3 samples each) located in southern Ontario. Results showed that residue estimates from the app method were in good agreement with those obtained from both photograph-grid and script methods (R² = 0.86 and 0.84, respectively). This study has found that the app underestimates the residue coverage by -6.3% and -10.8% when compared to the photograph-grid and script methods, respectively. With regards to residue type, soybean has a slightly lower bias than corn (i.e., -5.3% vs. -7.4%). For photos with residue app derived residue measurements are within ±5% difference (bias) of both photograph-grid- and script-derived residue measurements. These methods could therefore be used to track the recommended minimum soil

  16. Using a Mobile Device “App” and Proximal Remote Sensing Technologies to Assess Soil Cover Fractions on Agricultural Fields

    Directory of Open Access Journals (Sweden)

    Ahmed Laamrani

    2018-02-01

    Full Text Available Quantifying the amount of crop residue left in the field after harvest is a key issue for sustainability. Conventional assessment approaches (e.g., line-transect are labor intensive, time-consuming and costly. Many proximal remote sensing devices and systems have been developed for agricultural applications such as cover crop and residue mapping. For instance, current mobile devices (smartphones & tablets are usually equipped with digital cameras and global positioning systems and use applications (apps for in-field data collection and analysis. In this study, we assess the feasibility and strength of a mobile device app developed to estimate crop residue cover. The performance of this novel technique (from here on referred to as “app” method was compared against two point counting approaches: an established digital photograph-grid method and a new automated residue counting script developed in MATLAB at the University of Guelph. Both photograph-grid and script methods were used to count residue under 100 grid points. Residue percent cover was estimated using the app, script and photograph-grid methods on 54 vertical digital photographs (images of the ground taken from above at a height of 1.5 m collected from eighteen fields (9 corn and 9 soybean, 3 samples each located in southern Ontario. Results showed that residue estimates from the app method were in good agreement with those obtained from both photograph–grid and script methods (R2 = 0.86 and 0.84, respectively. This study has found that the app underestimates the residue coverage by −6.3% and −10.8% when compared to the photograph-grid and script methods, respectively. With regards to residue type, soybean has a slightly lower bias than corn (i.e., −5.3% vs. −7.4%. For photos with residue <30%, the app derived residue measurements are within ±5% difference (bias of both photograph-grid- and script-derived residue measurements. These methods could therefore be used to track

  17. Land-cover mapping of Red Rock Canyon National Conservation Area and Coyote Springs, Piute-Eldorado Valley, and Mormon Mesa Areas of Critical Environmental Concern, Clark County, Nevada

    Science.gov (United States)

    Smith, J. LaRue; Damar, Nancy A.; Charlet, David A.; Westenburg, Craig L.

    2014-01-01

    DigitalGlobe’s QuickBird satellite high-resolution multispectral imagery was classified by using Visual Learning Systems’ Feature Analyst feature extraction software to produce land-cover data sets for the Red Rock Canyon National Conservation Area and the Coyote Springs, Piute-Eldorado Valley, and Mormon Mesa Areas of Critical Environmental Concern in Clark County, Nevada. Over 1,000 vegetation field samples were collected at the stand level. The field samples were classified to the National Vegetation Classification Standard, Version 2 hierarchy at the alliance level and above. Feature extraction models were developed for vegetation on the basis of the spectral and spatial characteristics of selected field samples by using the Feature Analyst hierarchical learning process. Individual model results were merged to create one data set for the Red Rock Canyon National Conservation Area and one for each of the Areas of Critical Environmental Concern. Field sample points and photographs were used to validate and update the data set after model results were merged. Non-vegetation data layers, such as roads and disturbed areas, were delineated from the imagery and added to the final data sets. The resulting land-cover data sets are significantly more detailed than previously were available, both in resolution and in vegetation classes.

  18. A Study of the Role of Clouds in the Relationship Between Land Use/Land Cover and the Climate and Air Quality of the Atlanta Area

    Science.gov (United States)

    Kidder, Stanley Q.; Hafner, Jan

    2001-01-01

    The goal of Project ATLANTA is to derive a better scientific understanding of how land cover changes associated with urbanization affect climate and air quality. In this project the role that clouds play in this relationship was studied. Through GOES satellite observations and RAMS modeling of the Atlanta area, we found that in Atlanta (1) clouds are more frequent than in the surrounding rural areas; (2) clouds cool the surface by shading and thus tend to counteract the warming effect of urbanization; (3) clouds reflect sunlight, which might other wise be used to produce ozone; and (4) clouds decrease biogenic emission of ozone precursors, and they probably decrease ozone concentration. We also found that mesoscale modeling of clouds, especially of small, summertime clouds, needs to be improved and that coupled mesoscale and air quality models are needed to completely understand the mediating role that clouds play in the relationship between land use/land cover change and the climate and air quality of Atlanta. It is strongly recommended that more cities be studied to strengthen and extend these results.

  19. Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhao, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-24

    Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energy Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.

  20. Shielding Efficiency of a Fabric Based on Amorphous Glass-Covered Magnetic Microwires to Radiation Emitted by a Mobile Phone in 2G and 3G Communication Technologies

    Directory of Open Access Journals (Sweden)

    Miclăuş Simona

    2017-12-01

    Full Text Available A dual band mobile phone model was used to check the shielding properties of an amorphous ferromagnetic textile against the radiation emitted by the handset. Two frequencies belonging to the 2nd and 3rd generation of mobile emission technologies were used, 897 MHz and 1950 MHz. The specific absorption rate (SAR of energy deposition in a human head phantom was measured in standardized conditions. The textile contained micrometric-diameter wires of a ferromagnetic mixture embedded in a thin glass coat and weaved in a specific way. A set of fabric orientations and configurations (layering were provided in the experiment in order to achieve a better shielding to the phone’s radiation. Compared with the non-shielded handset, SAR deposited in the head while using the fabric-covered phone could be decreased up to 30 % of its initial value – in case of 2G technology and up to 24 % – in case of 3G technology. This type of material shows one of the highest shielding efficiencies of the electric-field component in near-field exposure conditions reported until now. A cubic curve of SAR decrease in depth of the head was revealed in both uncovered and covered handset, the effect of shielding being larger at the higher frequency.

  1. Creating high-resolution time series land-cover classifications in rapidly changing forested areas with BULC-U in Google Earth Engine

    Science.gov (United States)

    Cardille, J. A.; Lee, J.

    2017-12-01

    With the opening of the Landsat archive, there is a dramatically increased potential for creating high-quality time series of land use/land-cover (LULC) classifications derived from remote sensing. Although LULC time series are appealing, their creation is typically challenging in two fundamental ways. First, there is a need to create maximally correct LULC maps for consideration at each time step; and second, there is a need to have the elements of the time series be consistent with each other, without pixels that flip improbably between covers due only to unavoidable, stray classification errors. We have developed the Bayesian Updating of Land Cover - Unsupervised (BULC-U) algorithm to address these challenges simultaneously, and introduce and apply it here for two related but distinct purposes. First, with minimal human intervention, we produced an internally consistent, high-accuracy LULC time series in rapidly changing Mato Grosso, Brazil for a time interval (1986-2000) in which cropland area more than doubled. The spatial and temporal resolution of the 59 LULC snapshots allows users to witness the establishment of towns and farms at the expense of forest. The new time series could be used by policy-makers and analysts to unravel important considerations for conservation and management, including the timing and location of past development, the rate and nature of changes in forest connectivity, the connection with road infrastructure, and more. The second application of BULC-U is to sharpen the well-known GlobCover 2009 classification from 300m to 30m, while improving accuracy measures for every class. The greatly improved resolution and accuracy permits a better representation of the true LULC proportions, the use of this map in models, and quantification of the potential impacts of changes. Given that there may easily be thousands and potentially millions of images available to harvest for an LULC time series, it is imperative to build useful algorithms

  2. Technology strategy for enhanced recovery; Technology Target Areas; TTA3 - enhanced recovery

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The Norwegian Continental Shelf (NCS) is facing new challenges in reserve replacement and improved recovery in order to maintain the overall oil production rate from the area. A new target for an increase in oil reserves of 800 million Sm3 of oil (5 billion barrels) by year 2015 has been set by NPD. This is an ambitious goal considering several of the large fields are on a steep decline, and most of the recent discoveries are relatively small. A significant part of these increased reserves will have to come from fields currently on production, from reservoir areas that have been partly or fully swept, and it is therefore evident that Enhanced Oil Recovery (EOR) methods have to play a key role in achieving this target. EOR methods can be divided into gas based EOR methods and water based EOR methods. Thermal methods are not considered applicable on the NCS due to the relatively light oils present, and the depth of the reservoirs. Gas Based EOR; Water Based EOR; CO{sub 2} injection; Surfactants; Air injection; Polymer; Nitrogen injection; Alkaline; Flue gas injection; Polymer gels; WAG; MEOR; FAWAG. The former OG21 strategy document gave high priority to Water Alternating Gas (WAG) methods and CO{sub 2} injection for enhanced recovery. A lot of research and development and evaluation projects on CO{sub 2} injection were launched and are on-going, most of these are being CO{sub 2} WAG studies. The main challenge now in order to realize CO{sub 2} injection on the NCS is on CO{sub 2} availability and transport. It is also believed that increasing gas prices will limit the availability of hydrocarbon gas for injection purposes in the future. There is, however, a clear need for developing alternative cost efficient EOR methods that can improve the sweep efficiency significantly. Since a majority of the fields on the NCS are being produced under water flooding (or WAG), methods that can improve the water flooding efficiency by chemical additives are of special interest and

  3. A Framework for Managing Inter-Site Storage Area Networks using Grid Technologies

    Science.gov (United States)

    Kobler, Ben; McCall, Fritz; Smorul, Mike

    2006-01-01

    The NASA Goddard Space Flight Center and the University of Maryland Institute for Advanced Computer Studies are studying mechanisms for installing and managing Storage Area Networks (SANs) that span multiple independent collaborating institutions using Storage Area Network Routers (SAN Routers). We present a framework for managing inter-site distributed SANs that uses Grid Technologies to balance the competing needs to control local resources, share information, delegate administrative access, and manage the complex trust relationships between the participating sites.

  4. Estimation of biogenic emissions with satellite-derived land use and land cover data for air quality modeling of Houston-Galveston ozone nonattainment area.

    Science.gov (United States)

    Byun, Daewon W; Kim, Soontae; Czader, Beata; Nowak, David; Stetson, Stephen; Estes, Mark

    2005-06-01

    The Houston-Galveston Area (HGA) is one of the most severe ozone non-attainment regions in the US. To study the effectiveness of controlling anthropogenic emissions to mitigate regional ozone nonattainment problems, it is necessary to utilize adequate datasets describing the environmental conditions that influence the photochemical reactivity of the ambient atmosphere. Compared to the anthropogenic emissions from point and mobile sources, there are large uncertainties in the locations and amounts of biogenic emissions. For regional air quality modeling applications, biogenic emissions are not directly measured but are usually estimated with meteorological data such as photo-synthetically active solar radiation, surface temperature, land type, and vegetation database. In this paper, we characterize these meteorological input parameters and two different land use land cover datasets available for HGA: the conventional biogenic vegetation/land use data and satellite-derived high-resolution land cover data. We describe the procedures used for the estimation of biogenic emissions with the satellite derived land cover data and leaf mass density information. Air quality model simulations were performed using both the original and the new biogenic emissions estimates. The results showed that there were considerable uncertainties in biogenic emissions inputs. Subsequently, ozone predictions were affected up to 10 ppb, but the magnitudes and locations of peak ozone varied each day depending on the upwind or downwind positions of the biogenic emission sources relative to the anthropogenic NOx and VOC sources. Although the assessment had limitations such as heterogeneity in the spatial resolutions, the study highlighted the significance of biogenic emissions uncertainty on air quality predictions. However, the study did not allow extrapolation of the directional changes in air quality corresponding to the changes in LULC because the two datasets were based on vastly different

  5. High spatial resolution mapping of the Cerrado's land cover and land use types in the priority area for conservation Chapada da Contagem, Brazil.

    Science.gov (United States)

    Ribeiro, F.; Roberts, D. A.; Davis, F. W.; Antunes Daldegan, G.; Nackoney, J.; Hess, L. L.

    2016-12-01

    The Brazilian savanna, Cerrado, is the second largest biome over South America and the most floristically diverse savanna in the world. This biome is considered a conservation hotspot in respect to its biodiversity importance and rapid transformation of its landscape. The Cerrado's natural vegetation has been severely transformed by agriculture and pasture activities. Currently it is the main agricultural frontier in Brazil and one of the most threatened Brazilian biomes. This scenario results in environmental impacts such as ecosystems fragmentation as well as losses in connectivity, biodiversity and gene flow, changes in the microclimate and energy, carbon and nutrients cycles, among others. The Priority Areas for Conservation is a governmental program from Brazil that identifies areas with high conservation priority. One of this program's recommendation is a natural vegetation map including their major ecosystem classes. This study aims to generate more precise information for the Cerrado's vegetation. The main objective of this study is to identify which ecosystems are being prioritized and/or threatened by land use, refining information for further protection. In order to test methods, the priority area for conservation Chapada da Contagem was selected as the study site. This area is ranked as "extremely high priority" by the government and is located in the Federal District and Goias State, Brazil. Satellites with finer spatial resolution may improve the classification of the Cerrado's vegetation. Remote sensing methods and two criteria were tested using RapidEye 3A imagery (5m spatial resolution) collected in 2014 in order to classify the Cerrado's major land cover types of this area, as well as its land use. One criterion considers the Cerrado's major terrestrial ecosystems, which are divided into forest, savanna and grassland. The other involves scaling it down to the major physiognomic groups of each ecosystem. Other sources of environmental dataset such

  6. The role of protected areas in land use/land cover change and the carbon cycle in the conterminous United States

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Xiaoliang [The Ecosystems Center, Marine Biological Laboratory, Woods Hole MA USA; Zhou, Yuyu [Departments of Geological and Atmospheric Sciences, Iowa State University, Ames IA USA; Liu, Yaling [Pacific Northwest National Laboratory, Joint Global Change Research Institute, College Park MD USA; Le Page, Yannick [Department Tapada da Ajuda, Centro de Estudos Florestais, Instituto Superior de Agronomia, Universidade de Lisboa, Lisbon Portugal

    2017-08-08

    Protected areas (PAs) cover about 22% of the conterminous United States. Understanding their role on historical land use and land cover change (LULCC) and on the carbon cycle is essential to provide guidance for environmental policies. In this study, we compiled historical LULCC and PAs data to explore these interactions within the terrestrial ecosystem model (TEM). We found that intensive LULCC occurred in the conterminous United States from 1700 to 2005. More than 3 million km2 of forest, grassland and shrublands were converted into agricultural lands, which caused 10,607 Tg C release from land ecosystems to atmosphere. PAs had experienced little LULCC as they were generally established in the 20th century after most of the agricultural expansion had occurred. PAs initially acted as a carbon source due to land use legacies, but their accumulated carbon budget switched to a carbon sink in the 1960s, sequestering an estimated 1,642 Tg C over 1700–2005, or 13.4% of carbon losses in non-PAs. We also find that PAs maintain larger carbon stocks and continue sequestering carbon in recent years (2001–2005), but at a lower rate due to increased heterotrophic respiration as well as lower productivity associated to aging ecosystems. It is essential to continue efforts to maintain resilient, biodiverse ecosystems and avoid large-scale disturbances that would release large amounts of carbon in PAs.

  7. The role of protected areas in land use/land cover change and the carbon cycle in the conterminous United States.

    Science.gov (United States)

    Lu, Xiaoliang; Zhou, Yuyu; Liu, Yaling; Le Page, Yannick

    2018-02-01

    Protected areas (PAs) cover about 22% of the conterminous United States. Understanding their role on historical land use and land cover change (LULCC) and on the carbon cycle is essential to provide guidance for environmental policies. In this study, we compiled historical LULCC and PAs data to explore these interactions within the terrestrial ecosystem model (TEM). We found that intensive LULCC occurred in the conterminous United States from 1700 to 2005. More than 3 million km 2 of forest, grassland and shrublands were converted into agricultural lands, which caused 10,607 Tg C release from land ecosystems to atmosphere. PAs had experienced little LULCC as they were generally established in the 20th century after most of the agricultural expansion had occurred. PAs initially acted as a carbon source due to land use legacies, but their accumulated carbon budget switched to a carbon sink in the 1960s, sequestering an estimated 1,642 Tg C over 1700-2005, or 13.4% of carbon losses in non-PAs. We also find that PAs maintain larger carbon stocks and continue sequestering carbon in recent years (2001-2005), but at a lower rate due to increased heterotrophic respiration as well as lower productivity associated to aging ecosystems. It is essential to continue efforts to maintain resilient, biodiverse ecosystems and avoid large-scale disturbances that would release large amounts of carbon in PAs. © 2017 John Wiley & Sons Ltd.

  8. Study on resources and environmental data integration towards data warehouse construction covering trans-boundary area of China, Russia and Mongolia

    International Nuclear Information System (INIS)

    Wang, J; Song, J; Gao, M; Zhu, L

    2014-01-01

    The trans-boundary area between Northern China, Mongolia and eastern Siberia of Russia is a continuous geographical area located in north eastern Asia. Many common issues in this region need to be addressed based on a uniform resources and environmental data warehouse. Based on the practice of joint scientific expedition, the paper presented a data integration solution including 3 steps, i.e., data collection standards and specifications making, data reorganization and process, data warehouse design and development. A series of data collection standards and specifications were drawn up firstly covering more than 10 domains. According to the uniform standard, 20 resources and environmental survey databases in regional scale, and 11 in-situ observation databases were reorganized and integrated. North East Asia Resources and Environmental Data Warehouse was designed, which included 4 layers, i.e., resources layer, core business logic layer, internet interoperation layer, and web portal layer. The data warehouse prototype was developed and deployed initially. All the integrated data in this area can be accessed online

  9. Study on resources and environmental data integration towards data warehouse construction covering trans-boundary area of China, Russia and Mongolia

    Science.gov (United States)

    Wang, J.; Song, J.; Gao, M.; Zhu, L.

    2014-02-01

    The trans-boundary area between Northern China, Mongolia and eastern Siberia of Russia is a continuous geographical area located in north eastern Asia. Many common issues in this region need to be addressed based on a uniform resources and environmental data warehouse. Based on the practice of joint scientific expedition, the paper presented a data integration solution including 3 steps, i.e., data collection standards and specifications making, data reorganization and process, data warehouse design and development. A series of data collection standards and specifications were drawn up firstly covering more than 10 domains. According to the uniform standard, 20 resources and environmental survey databases in regional scale, and 11 in-situ observation databases were reorganized and integrated. North East Asia Resources and Environmental Data Warehouse was designed, which included 4 layers, i.e., resources layer, core business logic layer, internet interoperation layer, and web portal layer. The data warehouse prototype was developed and deployed initially. All the integrated data in this area can be accessed online.

  10. Brokerage and SME Innovation: An Analysis of the Technology Transfer Service at Area Science Park, Italy

    Science.gov (United States)

    Cattapan, Paolo; Passarelli, Mariacarmela; Petrone, Michele

    2012-01-01

    This paper contributes to the literature on innovation brokerage by analysing the effects of brokerage activities on the innovation and growth of small and medium-sized enterprises (SMEs). The authors provide a detailed description of the Technology Transfer Service (TTS), credited as a European best-practice innovation broker, at Area Science…

  11. Surface cover infiltration index: a suggested method to assess infiltration capacity for intrinsic vulnerability in karstic areas in absence of quantitative data

    Directory of Open Access Journals (Sweden)

    Tezcan Levent

    2004-12-01

    Full Text Available Karst is a hydrogeological environment of importance not only for its water resources potential but also for its scenic and economic potential, thereby increasing the intensity of human impact. The uniqueness of karst in this regard stems from its high sensitivity and vulnerability to imposed pressures and its distinctive response to these pressures. Therefore, a clear definition and formulation of the concept of ‘intrinsic vulnerability’ is essential for the design of vulnerability and/or management criteria of the karstic system as a resource. In this regard, the recharge rate, the amount of water passing through the unsaturated zone into the aquifer, is among the principal attributes of the intrinsic vulnerability. Where data and measurements are available for even large areas, recharge can be evaluated quantitatively on the basis of field measurements and the water balance equation. However, particularly for countries suffering from lack of essential data for a quantitative evaluation of the net recharge rate, the recharge can be estimated using some derived parameters such as the so called ‘Surface Cover Infiltration Index’ proposed in this paper. The DRASTIC method which is modified by using SCI, soil thickness and precipitation, allows the unique hydrological behavior of karst to be considered by redistributing of the intrinsic vulnerability values on the basis of hydrologic connections between neighboring cells. Following a detailed description of the SCI index and the modification of DRASTIC method for karst aquifers, a case study carried out to demonstrate this method is presented in this paper whose objective is to discuss and thus elaborate the suggested methodology. The Olimpos National Park area was selected because the great variation in lithology, landuse and topography. It was found that the relative vulnerability may vary particularly in the neighborhood of the highly vulnerable cells covered by carbonate rocks. The

  12. The Identification of Technology Platforms and Innovation Areas with High Regional Impact

    Directory of Open Access Journals (Sweden)

    Nataša Urbančíková

    2011-10-01

    Full Text Available The paper is focused on the process of identification of the technological platforms and innovation areas with high regional impact. The aim is to discover future fields of technological innovation which are having a high qualitative and quantitative demand of high potentials. The research has been undertaken within project Innovative Development of European Areas by fostering transnational Knowledge Development – IDEA/ 2CE1175P1 funded by Central Europe Programme. The aim of IDEA project is the development of an adequate strategy which enables the small and medium sized enterprises in the regions of Central Europe to face the increasing demand of high potentials with tested methods and instruments. The target group of IDEA project are so called “high potentials” in the engineering and scientific sector where future-oriented technologies are one of the main sources of innovation.

  13. Potential Offshore Wind Energy Areas in California: An Assessment of Locations, Technology, and Costs

    Energy Technology Data Exchange (ETDEWEB)

    Musial, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States); Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, Suzanne [National Renewable Energy Lab. (NREL), Golden, CO (United States); Smith, Aaron [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-12-01

    This report summarizes a study of possible offshore wind energy locations, technologies, and levelized cost of energy in the state of California between 2015 and 2030. The study was funded by the U.S. Department of the Interior's Bureau of Ocean Energy Management (BOEM), the federal agency responsible for regulating renewable energy development on the Outer Continental Shelf. It is based on reference wind energy areas where representative technology and performance characteristics were evaluated. These reference areas were identified as sites that were suitable to represent offshore wind cost and technology based on physical site conditions, wind resource quality, known existing site use, and proximity to necessary infrastructure. The purpose of this study is to assist energy policy decision-making by state utilities, independent system operators, state government officials and policymakers, BOEM, and its key stakeholders. The report is not intended to serve as a prescreening exercise for possible future offshore wind development.

  14. Has anthropogenic land-cover change been a significant climate forcing in the past? - An assessment for the Baltic Sea catchment area based on a literature review

    Science.gov (United States)

    Gaillard, Marie-Jose; Kaplan, Jed O.; Kleinen, Thomas; Brigitte Nielsen, Anne; Poska, Anneli; Samuelsson, Patrick; Strandberg, Gustav; Trondman, Anna-Kari

    2015-04-01

    We reviewed the recent published scientific literature on land cover-climate interactions at the global and regional spatial scales with the aim to assess whether it is convincingly demonstrated that anthropogenic land-cover change (ALCC) has been (over the last centuries and millennia) a significant climate forcing at the global scale, and more specifically at the scale of the Baltic Sea catchment area. The conclusions from this review are as follows: i) anthropogenic land-cover change (ALCC) is one of the few climate forcings for which the net direction of the climate response in the past is still not known. The uncertainty is due to the often counteracting temperature responses to the many biogeophysical effects, and to the biogeochemical vs biogeophysical effects; ii) there is no indication that deforestation in the Baltic Sea area since AD 1850 would have been a major cause of the recent climate warming in the region through a positive biogeochemical feedback; iii) several model studies suggest that boreal reforestation might not be an effective climate warming mitigation tool as it might lead to increased warming through biogeophysical processes; iv) palaeoecological studies indicate a major transformation of the landscape by anthropogenic activities in the southern zone of the study region occurring between 6000 and 3000/2500 calendar years before present (cal. BP) (1) ; v) the only modelling study so far of the biogeophysical effects of past ALCCs on regional climate in Europe suggests that a deforestation of the magnitude of that reconstructed for the past (between 6000 and 200 cal BP) can produce changes in winter and summer temperatures of +/- 1°, the sign of the change depending on the season and the region (2). Thus, if ALCC and their biogeophysical effects did matter in the past, they should matter today and in the future. A still prevailing idea is that planting trees will mitigate climate warming through biogeochemical effects. Therefore, there is

  15. Landfill Top Covers

    DEFF Research Database (Denmark)

    Scheutz, Charlotte; Kjeldsen, Peter

    2011-01-01

    The purpose of the final cover of a landfill is to contain the waste and to provide for a physical separation between the waste and the environment for protection of public health. Most landfill covers are designed with the primary goal to reduce or prevent infiltration of precipitation...... into the landfill in order to minimize leachate generation. In addition the cover also has to control the release of gases produced in the landfill so the gas can be ventilated, collected and utilized, or oxidized in situ. The landfill cover should also minimize erosion and support vegetation. Finally the cover...... is landscaped in order to fit into the surrounding area/environment or meet specific plans for the final use of the landfill. To fulfill the above listed requirements landfill covers are often multicomponent systems which are placed directly on top of the waste. The top cover may be placed immediately after...

  16. Reports covering research projects in the field of reactor safety supported by the German Federal Ministry for Research and Technology

    International Nuclear Information System (INIS)

    1976-03-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the safety program 'Reactor Safety' are sponsored by the Bundesminister fuer Forschung und Technologie (BMFT - Secretary of State for Research and Technology). Objective of this program is to continue improving the safety of LWR, in order to minimize the risk for the environment. With grant assistance from the Bundesminister des Innern. (BMI - Secretary of State for Home Affairs) research cont racts in the field of reactor safety are being performed. Results of these projects should contribute to resolve questions arising nuclear licensing procedures. The Forschungsbetreuung (FB - research supervision department) at the Institute for Reactor Safety (IRS), as consultants to BMFT and BMI, provides information about the progress of investigations. Individual reports will be prepared and put into standard forms by the research contractors. Each report gives information on: 1) the work accomplished, 2) the results obtained, 3) the work planned to be continued. Initial reports of research projects describe in addition the purpose of the work. A BMFT-research program on the safety of Fast Breeders (Schneller Brutreaktor - SBR) is presently under discussion. In order to define several problems, investigations included in the present compilation (RS 139, 140, 143, 162) will be previously performed. (orig.) [de

  17. Rule-based land use/land cover classification in coastal areas using seasonal remote sensing imagery: a case study from Lianyungang City, China.

    Science.gov (United States)

    Yang, Xiaoyan; Chen, Longgao; Li, Yingkui; Xi, Wenjia; Chen, Longqian

    2015-07-01

    Land use/land cover (LULC) inventory provides an important dataset in regional planning and environmental assessment. To efficiently obtain the LULC inventory, we compared the LULC classifications based on single satellite imagery with a rule-based classification based on multi-seasonal imagery in Lianyungang City, a coastal city in China, using CBERS-02 (the 2nd China-Brazil Environmental Resource Satellites) images. The overall accuracies of the classification based on single imagery are 78.9, 82.8, and 82.0% in winter, early summer, and autumn, respectively. The rule-based classification improves the accuracy to 87.9% (kappa 0.85), suggesting that combining multi-seasonal images can considerably improve the classification accuracy over any single image-based classification. This method could also be used to analyze seasonal changes of LULC types, especially for those associated with tidal changes in coastal areas. The distribution and inventory of LULC types with an overall accuracy of 87.9% and a spatial resolution of 19.5 m can assist regional planning and environmental assessment efficiently in Lianyungang City. This rule-based classification provides a guidance to improve accuracy for coastal areas with distinct LULC temporal spectral features.

  18. Vegetation Cover and Habitat Heterogeneity derived from QuickBird data as proxies of Local Plant Species Richness in recently burned areas

    Science.gov (United States)

    Viedma, Olga; Torres, Ivan; Moreno, Jose Manuel

    2010-05-01

    In fire-prone ecosystems, it is very common that, following fire, plant species richness increases very markedly, mainly due to an explosion of annuals, following a rapid change during the first few years after the blaze. Herbs play a major role in the system, among other, by fixing nutrients that might be lost, or by changing competitive interactions with shrubs or tree seedlings. But assessing species richness, particularly, herbaceous one, in space and at large scale is very costly. Furthermore, the scale of measurement is also important. In this work we attempted to asses plant species richness during the first year after fire in an abandoned dehesa (open parkland) at three scales (1 m2, 25 m2 and 100 m2) using QuickBird images. The study area was located in Central Spain (Anchuras, Ciudad Real), and was affected by a large summer fire (ca. 2000 ha). Before the fire the system was composed of a shrubland intermixed with trees and open spaces. Two 90x180 m plots were selected and field species richness measures were made at the three scales, using a nested design. Field-based data were related to remotely sensed data using Regression Trees (RT) and Boosted Regression Trees (BRT) modelling. Explanatory spectral and textural remotely sensed data were ecologically interpreted based on vegetation cover ground-based data. We found that areas with low spectral contrast and high reflectivity were dominated by herbaceous species, and had greater species richness than those characterized by low contrast and medium-low reflectivity, which were dominated by shrubs and trees. The highest species richness was found in the areas characterized by high contrast and medium-high reflectivity, which had a mix of herbs and woody layers. Variance explained varied depending on the modelling approach and the scale, from 21% and 50% for 1 m2 using RT and BRT, respectively; to 65% and 79% for 100 m2. The contribution of different life forms in model fitting was scale-dependent. At

  19. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet

  20. Synthesis and characterization of magnetic cobalt ferrite nanoparticles covered with 3-aminopropyltriethoxysilane for use as hybrid material in nano technology

    International Nuclear Information System (INIS)

    Camilo, Ruth Luqueze

    2006-01-01

    Nowadays with the appear of nano science and nano technology, magnetic nanoparticles have been finding a variety of applications in the fields of biomedicine, diagnosis, molecular biology, biochemistry, catalysis, etc. The magnetic functionalized nanoparticles are constituted of a magnetic nucleus, involved by a polymeric layer with active sites, which ones could anchor metals or selective organic compounds. These nanoparticles are considered organic inorganic hybrid materials and have great interest as materials for commercial applications due to the specific properties. Among the important applications it can be mentioned: magneto hyperthermia treatment, drugs delivery in specific local of the body, molecular recognition, biosensors, enhancement of nuclear magnetic resonance images quality, etc. This work was developed in two parts: 1) the synthesis of the nucleus composed by superparamagnetic nanoparticles of cobalt ferrite and, 2) the recovering of nucleus by a polymeric bifunctional 3-aminopropyltriethoxysilane. The parameters studied in the first part of the research were: pH, hydroxide molar concentration, hydroxide type, reagent order of addition, reagent way of addition, speed of shake, metals initial concentrations, molar fraction of cobalt and thermal treatment. In the second part it was studied: pH, temperature, catalyst type, catalyst concentration, time of reaction, relation ratios of H 2 O/silane, type of medium and the efficiency of the recovering regarding to pH. The products obtained were characterized using the following techniques X-ray powder diffraction (DRX), transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), spectroscopy of scatterbrained energy spectroscopy (DES), atomic emission spectroscopy (ICP-AES), thermogravimetric analysis (TGA/DTGA), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and magnetization curves (VSM). (author)

  1. NASA Space Technology Draft Roadmap Area 13: Ground and Launch Systems Processing

    Science.gov (United States)

    Clements, Greg

    2011-01-01

    This slide presentation reviews the technology development roadmap for the area of ground and launch systems processing. The scope of this technology area includes: (1) Assembly, integration, and processing of the launch vehicle, spacecraft, and payload hardware (2) Supply chain management (3) Transportation of hardware to the launch site (4) Transportation to and operations at the launch pad (5) Launch processing infrastructure and its ability to support future operations (6) Range, personnel, and facility safety capabilities (7) Launch and landing weather (8) Environmental impact mitigations for ground and launch operations (9) Launch control center operations and infrastructure (10) Mission integration and planning (11) Mission training for both ground and flight crew personnel (12) Mission control center operations and infrastructure (13) Telemetry and command processing and archiving (14) Recovery operations for flight crews, flight hardware, and returned samples. This technology roadmap also identifies ground, launch and mission technologies that will: (1) Dramatically transform future space operations, with significant improvement in life-cycle costs (2) Improve the quality of life on earth, while exploring in co-existence with the environment (3) Increase reliability and mission availability using low/zero maintenance materials and systems, comprehensive capabilities to ascertain and forecast system health/configuration, data integration, and the use of advanced/expert software systems (4) Enhance methods to assess safety and mission risk posture, which would allow for timely and better decision making. Several key technologies are identified, with a couple of slides devoted to one of these technologies (i.e., corrosion detection and prevention). Development of these technologies can enhance life on earth and have a major impact on how we can access space, eventually making routine commercial space access and improve building and manufacturing, and weather

  2. Area- and energy-efficient CORDIC accelerators in deep sub-micron CMOS technologies

    Science.gov (United States)

    Vishnoi, U.; Noll, T. G.

    2012-09-01

    The COordinate Rotate DIgital Computer (CORDIC) algorithm is a well known versatile approach and is widely applied in today's SoCs for especially but not restricted to digital communications. Dedicated CORDIC blocks can be implemented in deep sub-micron CMOS technologies at very low area and energy costs and are attractive to be used as hardware accelerators for Application Specific Instruction Processors (ASIPs). Thereby, overcoming the well known energy vs. flexibility conflict. Optimizing Global Navigation Satellite System (GNSS) receivers to reduce the hardware complexity is an important research topic at present. In such receivers CORDIC accelerators can be used for digital baseband processing (fixed-point) and in Position-Velocity-Time estimation (floating-point). A micro architecture well suited to such applications is presented. This architecture is parameterized according to the wordlengths as well as the number of iterations and can be easily extended for floating point data format. Moreover, area can be traded for throughput by partially or even fully unrolling the iterations, whereby the degree of pipelining is organized with one CORDIC iteration per cycle. From the architectural description, the macro layout can be generated fully automatically using an in-house datapath generator tool. Since the adders and shifters play an important role in optimizing the CORDIC block, they must be carefully optimized for high area and energy efficiency in the underlying technology. So, for this purpose carry-select adders and logarithmic shifters have been chosen. Device dimensioning was automatically optimized with respect to dynamic and static power, area and performance using the in-house tool. The fully sequential CORDIC block for fixed-point digital baseband processing features a wordlength of 16 bits, requires 5232 transistors, which is implemented in a 40-nm CMOS technology and occupies a silicon area of 1560 μm2 only. Maximum clock frequency from circuit

  3. Benthic Cover

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic cover (habitat) maps are derived from aerial imagery, underwater photos, acoustic surveys, and data gathered from sediment samples. Shallow to moderate-depth...

  4. [Research on monitoring land subsidence in Beijing plain area using PS-InSAR technology].

    Science.gov (United States)

    Gu, Zhao-Qin; Gong, Hui-Li; Zhang, You-Quan; Lu, Xue-Hui; Wang, Sa; Wang, Rong; Liu, Huan-Huan

    2014-07-01

    In the present paper, the authors use permanent scatterers synthetic aperture radar interferometry (PS-InSAR) technique and 29 acquisitions by Envisat during 2003 to 2009 to monitor and analyze the spatial-temporal distribution and mechanism characterize of land subsidence in Beijing plain area. The results show that subsidence bowls have been bounded together in Beijing plain area, which covers Chaoyang, Changping, Shunyi and Tongzhou area, and the range of subsidence has an eastward trend. The most serious regional subsidence is mainly distributed by the quaternary depression in Beijing plain area. PS-Insar results also show a new subsidence bowl in Pinggu. What's more, the spatial and temporal distribution of deformation is controlled mainly by faults, such as Liangxiang-Shunyi fault, Huangzhuang-Gaoliying fault, and Nankou-Sunhe fault. The subsidence and level of groundwater in study area shows a good correlation, and the subsidence shows seasonal ups trend during November to March and seasonal downs trend during March to June along with changes in groundwater levels. The contribution of land subsidence is also influenced by stress-strain behavior of aquitards. The compaction of aquitards shows an elastic, plastic, viscoelastic pattern.

  5. Polymer and Concentrator Photovoltaic Technologies - Energy Return Factors and Area Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Loefgren, Birger; Gustaf Zettergren

    2006-12-20

    Market diffusion of flat plate crystalline silicon photovoltaic (PV) technology has been induced by economical support schemes and has lead to reduced cost per produced kWh electricity. For further market penetration of the PV technology, a continued reduction of production cost is required. Two alternative approaches to achieve this are using less expensive materials or changing the active materials. The technologies of concentrator PV (CPV) systems and polymer PV (PPV) devices represent these two strategies. The potential energy performance of these technologies is studied in terms of the process primary energy requirements for manufacturing, how many times this energy is paid back during its lifetime and as the required land area for electricity generation. The study is an energy analysis incorporating the inherent uncertainties in technology development. Uncertainties are identified in data acquisition, in design choices, as induced by development and improvement, in performance and by different application scenarios. The future technology alternatives are defined in different ways for CPV and PPV. CPV parameters are derived from existing products and ideas for improvements and PPV parameters from the directions of research. This study shows that the invested energy in future CPV and PPV is potentially paid back up to about 90 and 170 times, respectively, under Arizona (CPV) and average European (PPV) solar irradiation conditions. However the result is highly dependent on configuration, inventory data and device performance. Thus, for certain design alternatives, data and performance, PPV production energy is far from paid back during its lifetime. For CPV the energy return factor is decreased to about 13 in the least beneficial case. Area efficiency is studied as the land area requirements for producing a net output electricity of 1 MWh during 25 years. With device efficiencies from 1 to 5 per cent and lifetimes from 1 to 5 years a PPV device requires from 2

  6. Tanks Focus Area retrieval process development and enhancements FY96 technology development summary report

    International Nuclear Information System (INIS)

    Rinker, M.W.; Bamberger, J.A.; Hatchell, B.K.

    1996-09-01

    The Retrieval Process Development and Enhancements (RPD ampersand E) activities are part of the Retrieval and Closure Program of the U.S. Department of Energy (DOE) EM-50 Tanks Focus Area. The purposes of RPD ampersand E are to understand retrieval processes, including emerging and existing technologies, and to gather data on those processes, so that end users have the requisite technical basis to make retrieval decisions. Work has been initiated to support the need for multiple retrieval technologies across the DOE complex. Technologies addressed during FY96 focused on enhancements to sluicing, borehole mining, confined sluicing retrieval end effectors, the lightweight scarifier, and pulsed air mixing. Furthermore, a decision tool and database have been initiated to link retrieval processes with tank closure to assist end users in making retrieval decisions

  7. Idaho National Engineering Laboratory waste area groups 1--7 and 10 Technology Logic Diagram

    International Nuclear Information System (INIS)

    O'Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Technology Logic Diagram was developed to provide technical alternatives for environmental restoration projects at the Idaho National Engineering Laboratory. The diagram (three volumes) documents suggested solutions to the characterization, retrieval, and treatment phases of cleanup activities at contaminated sites within 8 of the laboratory's 10 waste area groups. Contaminated sites at the laboratory's Naval Reactor Facility and Argonne National Laboratory-West are not included in this diagram

  8. Development of large area Multi-coloured Multifunctional Displays (MFA) in liquid crystal technology

    Science.gov (United States)

    Briegel, J.; Fahrenschon, K.; Keiner, H.; Marzel, O.; Schwedes, W.; Steinbeck, J.; Wiemer, W.

    1983-05-01

    Large area liquid crystal displays for automotive application including corresponding flat illumination systems and methods for integrating the driver IC's on the liquid crystal cell are discussed. Manufacturing technologies applicable for large quantity series production were worked out, and prototypes were delivered to the automotive industry, mainly the dynamic scattering mode and field effect displays (twisted nematic). The twisted nematic displays are preferred for automotive applications.

  9. Prospective areas in the production technology of scientific equipment for space research

    Science.gov (United States)

    Breslavets, A. V.

    1974-01-01

    The average labor of individual types of operations in the percentage ratio of the total labor consumption of manufacturing scientific instruments and apparatus for space research is presented. The prospective areas in the production technology of billet, machining, mechanical assembly, installation and assembly, adjustment and regulation and testing and control operations are noted. Basic recommendations are made with respect to further reduction of labor consumption and an increase in the productivity of labor when manufacturing scientific equipment for space research.

  10. Raised bed technology for wheat crop in irrigated areas of punjab, pakistan

    International Nuclear Information System (INIS)

    Taj, S.; Ali, A.; Akmal, N.; Yaqoob, S.; Ali, M.

    2013-01-01

    The present paper analyzes the determinants of adoption of raised bed planting of wheat in irrigated areas of Punjab, Pakistan. Wheat is an important staple food of Pakistan. It contributes 13 % to the value added in agriculture and 2.6 % to the GDP. The agrarian economy of Pakistan is continuously under stress due to the low yield of almost all the crops and constrained with many problem. One of the most important issues of agriculture is water shortage which is increasing day by day and is a major challenge now a days. Therefore, water saving becomes the utmost need of the hour. The national research system is now putting their focus and efforts to manage the precious water through various modern/latest water saving models to draw some solid method of irrigation with less wastage. Raised bed planting method is also one of the modern methods of planting crop with significant water saving. The study was planned and conducted by the Social Sciences Research Institute, Faisalabad in 2011-12 to assess the determinants of the adoption of the raised bed technology for wheat crop in irrigated Punjab, Pakistan. The study was conducted at three sites of the districts Faisalabad and Toba Tek Singh where the Water Management Research Institute, University of Faisalabad promoted the raised bed technology for wheat crop. A sample of 63 farmers was interviewed in detail to understand the whole system and the factors contributing to the adoption of the technology. The study revealed that adopters typically have a more favorable resource base and tend to variously outperform non-adopters. More access to education and other social indicators increases the chances to adopt new technologies by the farming community. However, the small farmers can also be benefited with the technology with proper education regarding the technology in the area with good social mobilization for the conservation of scarce and valuable farm resources. (author)

  11. Medical education for rural areas: opportunities and challenges for information and communications technologies.

    Science.gov (United States)

    Sargeant, Joan M

    2005-01-01

    Resources in medical education are not evenly distributed and access to education can be more problematic in rural areas. Similar to telemedicine's positive influence on health care access, advances in information and communications technologies (ICTs) increase opportunities for medical education. This paper provides a descriptive overview of the use of ICTs in medical education and suggests a conceptual model for reviewing ICT use in medical education, describes specific ICTs and educational interventions, and discusses opportunities and challenges of ICT use, especially in rural areas. The literature review included technology and medical education, 1996-2005. Using an educational model as a framework, the uses of ICTs in medical education are, very generally, to link learners, instructors, specific course materials and/or information resources in various ways. ICTs range from the simple (telephone, audio-conferencing) to the sophisticated (virtual environments, learning repositories) and can increase access to medical education and enhance learning and collaboration for learners at all levels and for institutions. While ICTs are being used and offer further potential for medical education enhancement, challenges exist, especially for rural areas. These are technological (e.g., overcoming barriers like cost, maintenance, access to telecommunications infrastructure), educational (using ICTs to best meet learners' educational priorities, integrating ICTs into educational programs) and social (sensitivity to remote needs, resources, cultures). Finally, there is need for more rigorous research to more clearly identify advantages and disadvantages of specific uses of ICTs in medical education.

  12. Medical education for rural areas: Opportunities and challenges for information and communications technologies

    Directory of Open Access Journals (Sweden)

    Sargeant Joan

    2005-01-01

    Full Text Available Resources in medical education are not evenly distributed and access to education can be more problematic in rural areas. Similar to telemedicine′s positive influence on health care access, advances in information and communications technologies (ICTs increase opportunities for medical education. This paper provides a descriptive overview of the use of ICTs in medical education and suggests a conceptual model for reviewing ICT use in medical education, describes specific ICTs and educational interventions, and discusses opportunities and challenges of ICT use, especially in rural areas. The literature review included technology and medical education, 1996-2005. Using an educational model as a framework, the uses of ICTs in medical education are, very generally, to link learners, instructors, specific course materials and/or information resources in various ways. ICTs range from the simple (telephone, audio-conferencing to the sophisticated (virtual environments, learning repositories and can increase access to medical education and enhance learning and collaboration for learners at all levels and for institutions. While ICTs are being used and offer further potential for medical education enhancement, challenges exist, especially for rural areas. These are technological (e.g., overcoming barriers like cost, maintenance, access to telecommunications infrastructure, educational (using ICTs to best meet learners′ educational priorities, integrating ICTs into educational programs and social (sensitivity to remote needs, resources, cultures. Finally, there is need for more rigorous research to more clearly identify advantages and disadvantages of specific uses of ICTs in medical education.

  13. Ice-Core Study of the Link between Sea-Salt Aerosol, Sea-Ice Cover and Climate in the Antarctic Peninsula Area

    Energy Technology Data Exchange (ETDEWEB)

    Aristarain, A.J. [Laboratorio de Estratigrafia Glaciar y Geoquimica del Agua y de la Nieve LEGAN, Instituto Antartico Argentino, Mendoza (Argentina); Delmas, R.J. [Laboratoire de Glaciologie et Geophysique de l' Environnement LGGE, Centre National de la Recherche Scientifique, BP 96, 38402 St. Martin d' Heres Cedex (France); Stievenard, M. [Laboratoire des Sciences du Climat et de l' Environnement LSCE, Centre d' Etudes de Saclay, 91191 Gif-sur-Yvette, Cedex (France)

    2004-11-01

    Three ice cores and a set of snow pit samples collected on James Ross Island, Antarctic Peninsula, in 1979, 1981 and 1991 have been analyzed for water stable isotope content D or 18O (isotopic temperature) and major chemical species. A reliable and detailed chronological scale has been established first for the upper 24.5 m of water equivalent (1990-1943) where various data sets can be compared, then extended down to 59.5 m of water equivalent (1847) with the aid of seasonal variations and the sulphate peak reflecting the 1883 Krakatoa volcanic eruption. At James Ross Island, sea-salt aerosol is generally produced by ice-free marine surfaces during the summer months, although some winter sea-salt events have been observed. For the upper part of the core (1990-1943), correlations (positive or negative) were calculated between isotopic temperature, chloride content (a sea-salt indicator), sea-ice extent, regional atmospheric temperature changes and atmospheric circulation. The D and chloride content correlation was then extended back to 1847, making it possible to estimate decadal sea-ice cover fluctuations over the study period. Our findings suggest that ice-core records from James Ross Island reflect the recent warming and sea-ice decrease trends observed in the Antarctic Peninsula area from the mid-1940s.

  14. STUDY ON THE DEW POINT TEMPERATURE IN AREAS COVERED BY COLLUVIAL MESOVOID SHALLOW SUBSTRATUM (CRYSTALLINE SCHISTS SCREE IN THE LEAOTA MOUNTAINS, 2014

    Directory of Open Access Journals (Sweden)

    Magdalin Leonard Dorobăţ

    2015-12-01

    Full Text Available This paper present and discussed the results of the monitoring of the dew point values, recorded in October and November 2014, in an ecological station in the Leaota Mountains. In this station, two polls were located in areas covered by colluvial mesovoid shallow substratum (MSS formed by epi- and mesometamorphic crystalline schists. In the ecological stations we located in the Leaota Mountains, almost always we found condensation on the walls of the polls tubes placed at different depths. Most often in spring or autumn or in other cold days, the dew point is more revealing regarding the recording actual amount of moisture in the air, than the relative humidity indicator. This work is part of a larger project that seeks correlations between ecological factors (humidity, temperature and dew point registered in various types of screes (limestone and crystalline schists and some zoocenotic components (invertebrates. This research aim to know the importance of mesovoid shallow substratum for invertebrates or small vertebrates fauna and represents a premiere for Leaota Mountains, not only regarding the continuous monitoring of some ecologic factors of these types of ecosystems (MSS, rarely researched even at global level, and also regarding the inventory of the invertebrate fauna in scree for these mountains.

  15. Recent land-use and land-cover changes and its driving factors in a fire-prone area of southwestern Turkey.

    Science.gov (United States)

    Viedma, Olga; Moreno, José M; Güngöroglu, Cumhur; Cosgun, Ufuk; Kavgacı, Ali

    2017-07-15

    During the last decades, contrasted trends in forest fires among countries around the Mediterranean basin have been observed. In the northern/western countries, Land Use-Land Cover (LULC) changes led to more hazardous landscapes, with consequent increases in fires. This contrasted with fire trends in southern/eastern countries. The recent incidence of large fires in some of the latter prompted the question of whether they are now following the path of their neighbors decades earlier. In this study, we investigated recent LULC changes in southwestern Turkey, focusing on those that could affect fire, and the factors driving them. To this end, LULC maps at different time steps (1975, 1990, 2000 and 2010) were obtained from Landsat images, together with relevant socioeconomic data. Generalized linear mixed models (GLMMs) were applied to assess the effects of socioeconomic and geophysical factors on the dominant LULC changes over time. Over the whole period studied, the most important LULC changes were deforestation followed by afforestation. Deforestation was positively related to high livestock density and proximity to villages and increased forest interfaces with other LULC types. We found no evidence that LULC changes were making the landscape more hazardous as there was a net decrease in fuels biomass and the landscape became more fragmented over time. However, despite the area being heavily used and relatively fragmented, large fires can occur driven by severe weather. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Multiple assessment of the soil cover in the area of natural monuments Tra-Tau and Yurak-Tau monadnocks under conditions of technogenic loads

    Science.gov (United States)

    Gabbasova, I. M.; Suleymanov, R. R.; Khabirov, I. K.; Komissarov, M. A.; Garipov, T. T.; Sidorova, L. V.; Nazyrova, F. I.

    2014-02-01

    The soil cover of Tra-Tau and Yurak-Tau shikhans (monadnocks) has been examined. Leached and typical medium-deep chernozems are developed on colluvial fans on the footslopes and on the lower parts of slopes, whereas typical calcareous thin slightly and moderately gravelly chernozems are developed on the upper and medium parts of slopes. The leached and typical chernozems of the footslopes correspond to zonal soils of the adjacent plain areas, though they have some specific features related to the local topographic conditions. These soils are somewhat thinner than plain chernozems and are characterized by the perfect granular water-stable structure, the high content of humus of the humate type, the high content of exchangeable cations, strong acid-base buffering, and high enzymatic activity. These features predetermine their high tolerance towards technogenic impacts. The concentrations of highly hazardous substances of the first toxicity class (mercury, arsenic, lead, and cadmium) and of moderately hazardous substances of the second toxicity class (copper, zinc, and nickel), as well as the concentrations of low-hazardous elements (manganese and iron) in these soils do not exceed provisional maximum permissible concentrations of these substances in soils irrespectively of the slope aspect. No changes in the physicochemical and biological properties of the soils under the impact of technogenic loads from Sterlitamak industrial center have been identified.

  17. mHealth Application Areas and Technology Combinations*. A Comparison of Literature from High and Low/Middle Income Countries.

    Science.gov (United States)

    Abaza, Haitham; Marschollek, Michael

    2017-08-08

    With the continuous and enormous spread of mobile technologies, mHealth has evolved as a new subfield of eHealth. While eHealth is broadly focused on information and communication technologies, mHealth seeks to explore more into mobile devices and wireless communication. Since mobile phone penetration has exceeded other infrastructure in low and middle-income countries (LMICs), mHealth is seen as a promising component to provide pervasive and patient-centered care. The aim of our research work for this paper is to examine the mHealth literature to identify application areas, target diseases, and mHealth service and technology types that are most appropriate for LMICs. Based on the 2011 WHO mHealth report, a combination of search terms, all including the word "mHealth", was identified. A literature review was conducted by searching the PubMed and IEEE Xplore databases. Articles were included if they were published in English, covered an mHealth solution/ intervention, involved the use of a mobile communication device, and included a pilot evaluation study. Articles were excluded if they did not provide sufficient detail on the solution covered or did not focus on clinical efficacy/effectiveness. Cross-referencing was also performed on included articles. 842 articles were retrieved and analyzed, 255 of which met the inclusion criteria. North America had the highest number of applications (n=74) followed by Europe (n=50), Asia (n=44), Africa (n=25), and Australia (n=9). The Middle East (n=5) and South America (n=3) had the least number of studies. The majority of solutions addressed diabetes (n=51), obesity (n=25), CVDs (n=24), HIV (n=18), mental health (n=16), health behaviors (n=16), and maternal and child's health (MCH) (n=11). Fewer solutions addressed asthma (n=7), cancer (n=5), family health planning (n=5), TB (n=3), malaria (n=2), chronic obtrusive pulmonary disease (COPD) (n=2), vision care (n=2), and dermatology (n=2). Other solutions targeted stroke, dental

  18. Mixed Waste Focus Area alternative oxidation technologies development and demonstration program

    International Nuclear Information System (INIS)

    Borduin, L.C.; Fewell, T.; Gombert, D.; Priebe, S.

    1998-01-01

    The Mixed Waste Focus Area (MWFA) is currently supporting the development and demonstration of several alternative oxidation technology (AOT) processes for treatment of combustible mixed low-level wastes. The impetus for this support derives from regulatory and political hurdles frequently encountered by traditional thermal techniques, primarily incinerators. AOTs have been defined as technologies that destroy organic material without using open-flame reactions. Whether thermal or nonthermal, the processes have the potential advantages of relatively low-volume gaseous emissions, generation of few or no dioxin/furan compounds, and operation at low enough temperatures that metals (except mercury) and most radionuclides are not volatilized. Technology development and demonstration are needed to confirm and realize the potential of AOTs and to compare them on an equal basis with their fully demonstrated thermal counterparts. AOTs include both thermal and nonthermal processes that oxidize organic wastes but operate under significantly different physical and chemical conditions than incinerators. Nonthermal processes currently being studied include Delphi DETOX and acid digestion at the Savannah River Site, and direct chemical oxidation at Lawrence Livermore National Laboratory. All three technologies are at advanced stages of development or are entering the demonstration phase. Nonflame thermal processes include catalytic chemical oxidation, which is being developed and deployed at Lawrence Berkeley National Laboratory, and team reforming, a commercial process being supported by Department of Energy. Related technologies include two low-flow, secondary oxidation processes (Phoenix and Thermatrix units) that have been tested at MSE, Inc., in Butte, Montana. Although testing is complete on some AOT technologies, most require additional support to complete some or all of the identified development objectives. Brief descriptions, status, and planned paths forward for each

  19. The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

    Directory of Open Access Journals (Sweden)

    Xiaochun Qin

    2015-01-01

    Full Text Available A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and application methods of solar energy technology for highway service area including solar photoelectric technology and solar water heating technology were discussed based on the analysis of characteristics of highway low-carbon service area; the system types, operation mode, and installing tilt angle of the two kinds of solar systems suitable for highway service areas were confirmed. It was proved that the reduction of the cost by electricity savings of solar system was huge. Taking the investment of the solar systems into account, the payback period of solar photoelectric systems and solar water heating systems was calculated. The economic effect of the solar systems in West Lushan highway service area during the effective operation periods was also calculated and proved very considerable.

  20. Feasibility of water purification technology in rural areas of developing countries.

    Science.gov (United States)

    Johnson, Dana M; Hokanson, David R; Zhang, Qiong; Czupinski, Kevin D; Tang, Jinxian

    2008-08-01

    Water scarcity is threatening social and economic growth in rural areas of developing countries. There are potential markets for water purification technologies in these regions. The main focus of this article is to evaluate the social, economic and political feasibilities of providing water purification technologies to rural areas of developing countries. The findings of this research can serve as the basis for private investors interested in entering this market. Four representative regions were selected for the study. Economic, demographic, and environmental variables of each region were collected and analyzed along with domestic markets and political information. Rural areas of the developing world are populated with poor people unable to fulfill the basic needs for clean water and sanitation. These people represent an important group of potential users. Due to economic, social, and political risks in these areas, it is difficult to build a strong case for any business or organization focusing on immediate returns on capital investment. A plausible business strategy would be to approach the water purification market as a corporate responsibility and social investing in the short term. This would allow an organization to be well positioned once the economic ability of individuals, governments, and donor agencies are better aligned.

  1. Verification of best available technology for the 300 Area Treated Effluent Disposal Facility (310 Facility)

    International Nuclear Information System (INIS)

    Wagner, R.N.

    1994-01-01

    This compilation of Project L-045H reference materials documents that the 300 Area Treated Effluent Disposal Facility (TEDF, also designated the 310 Facility) was designed, built, and will be operated in accordance with the best available technology (BAT) identified in the Engineering Summary Report. The facility is intended for treatment of 300 Area process sewer wastewater. The following unit operations for 300 Area process sewer water treatment are specified as: influent receipt; iron co-precipitation and sludge handling for removal of heavy metals and initial suspended solids; ion exchanged for removal of mercury and other heavy metals; ultraviolet (UV)/peroxide treatment for destruction of organic compounds, cyanide, coliforms, sulfide, and nitrite; and effluent discharge to the Columbia River with pH monitoring/control capability

  2. Design the developed bus parking area management solution based on fusion technology of things

    Science.gov (United States)

    Ge, Ying-long

    2013-07-01

    Taking advantage of the fusion technology of things this paper constructed a combination of hardware and software application, hardware's major function was to collect the bus behavior data of system needed, including basic data of driver and fare bag stored in moving passive RFID tag, and the information of running status of bus on each stage perceived by all kinds of sensors in the parking area. The information which was handled by the middleware was sent to data center. The program solved the problem on the monitoring of the behavior of the bus in the parking area, meanwhile, achieved the data sharing, so as to tackle the defects of the traditional bus parking area management system's non-automated data collection, non-real-time data presenting and poor data sharing.

  3. Mapping moderate-scale land-cover over very large geographic areas within a collaborative framework: A case study of the Southwest Regional Gap Analysis Project (SWReGAP)

    Science.gov (United States)

    Lowry, J.; Ramsey, R.D.; Thomas, K.; Schrupp, D.; Sajwaj, T.; Kirby, J.; Waller, E.; Schrader, S.; Falzarano, S.; Langs, L.; Manis, G.; Wallace, C.; Schulz, K.; Comer, P.; Pohs, K.; Rieth, W.; Velasquez, C.; Wolk, B.; Kepner, W.; Boykin, K.; O'Brien, L.; Bradford, D.; Thompson, B.; Prior-Magee, J.

    2007-01-01

    Land-cover mapping efforts within the USGS Gap Analysis Program have traditionally been state-centered; each state having the responsibility of implementing a project design for the geographic area within their state boundaries. The Southwest Regional Gap Analysis Project (SWReGAP) was the first formal GAP project designed at a regional, multi-state scale. The project area comprises the southwestern states of Arizona, Colorado, Nevada, New Mexico, and Utah. The land-cover map/dataset was generated using regionally consistent geospatial data (Landsat ETM+ imagery (1999-2001) and DEM derivatives), similar field data collection protocols, a standardized land-cover legend, and a common modeling approach (decision tree classifier). Partitioning of mapping responsibilities amongst the five collaborating states was organized around ecoregion-based "mapping zones". Over the course of 21/2 field seasons approximately 93,000 reference samples were collected directly, or obtained from other contemporary projects, for the land-cover modeling effort. The final map was made public in 2004 and contains 125 land-cover classes. An internal validation of 85 of the classes, representing 91% of the land area was performed. Agreement between withheld samples and the validated dataset was 61% (KHAT = .60, n = 17,030). This paper presents an overview of the methodologies used to create the regional land-cover dataset and highlights issues associated with large-area mapping within a coordinated, multi-institutional management framework. ?? 2006 Elsevier Inc. All rights reserved.

  4. 3D Visualization of Urban Area Using Lidar Technology and CityGML

    Science.gov (United States)

    Popovic, Dragana; Govedarica, Miro; Jovanovic, Dusan; Radulovic, Aleksandra; Simeunovic, Vlado

    2017-12-01

    3D models of urban areas have found use in modern world such as navigation, cartography, urban planning visualization, construction, tourism and even in new applications of mobile navigations. With the advancement of technology there are much better solutions for mapping earth’s surface and spatial objects. 3D city model enables exploration, analysis, management tasks and presentation of a city. Urban areas consist of terrain surfaces, buildings, vegetation and other parts of city infrastructure such as city furniture. Nowadays there are a lot of different methods for collecting, processing and publishing 3D models of area of interest. LIDAR technology is one of the most effective methods for collecting data due the large amount data that can be obtained with high density and geometrical accuracy. CityGML is open standard data model for storing alphanumeric and geometry attributes of city. There are 5 levels of display (LoD0, LoD1, LoD2, LoD3, LoD4). In this study, main aim is to represent part of urban area of Novi Sad using LIDAR technology, for data collecting, and different methods for extraction of information’s using CityGML as a standard for 3D representation. By using series of programs, it is possible to process collected data, transform it to CityGML and store it in spatial database. Final product is CityGML 3D model which can display textures and colours in order to give a better insight of the cities. This paper shows results of the first three levels of display. They consist of digital terrain model and buildings with differentiated rooftops and differentiated boundary surfaces. Complete model gives us a realistic view of 3D objects.

  5. Problems of teaching students to use the featured technologies in the area of semantic web

    Science.gov (United States)

    Klimov, V. V.; Chernyshov, A. A.; Balandina, A. I.; Kostkina, A. D.

    2017-01-01

    The following paper contains the description of up-to-date technologies in the area of web-services development, service-oriented architecture and the Semantic Web. The paper contains the analysis of the most popular and widespread technologies and methods in the semantic web area which are used in the developed educational course. In the paper, we also describe the problem of teaching students to use these technologies and specify conditions for the creation of the learning and development course. We also describe the main exercise for personal work and skills, which all the students learning this course have to gain. Moreover, in the paper we specify the problem with software which students are going to use while learning this course. In order to solve this problem, we introduce the developing system which will be used to support the laboratory works. For this moment this system supports only the fourth work execution, but our following plans contain the expansion of the system in order to support the leftover works.

  6. A stakeholder involvement approach to evaluate and enhance technology acceptance: U.S. Department of Energy Office of Technology Development's Plume Focus Area

    International Nuclear Information System (INIS)

    McCabe, G.H.; Stein, S.L.; Serie, P.J.

    1995-01-01

    The US Department of Energy (DOE) faces a major challenge in cleaning up its contaminated sites throughout the United States. One major area of concern is the plumes in soil and ground water which are contaminated with a myriad of different pollutants. DOE recently organized its plume-related problems into the Plume Focus Area. The mission of the Plume Focus Area is to enhance the deployment of innovative technologies for containing and cleaning up contaminant plumes in ground water and soil at all DOE sites. Environmental cleanup priorities for soil and ground water plumes are being defined and technology users have the challenge of matching current and innovative technologies to those priorities. By involving a range of stakeholders in the selection, demonstration, and evaluation of new technologies, the deployment of these technologies can be enhanced. If new plume cleanup technologies are to be deployable, they must improve on today's baseline technologies. The Sites' Coordination Team (SCT) of the Plume Focus Area develops and supports the implementation of methods for stakeholder involvement throughout the multiple steps that define focus area activities. Site-specific teams are being formed to carry out the strategy at each site, and the teams will work through Site Technology Coordination Groups (STCGs) at each location. The SCT is responsible for identifying the site-specific stakeholder involvement teams, training the team members, preparing needed national-level guidance and strategies, helping the teams tailor a strategy for their particular site that meets the overall needs of the focus area, and facilitating inter-site coordination. The results will be used to develop national technology acceptance reports on the innovative technologies being funded and evaluated under the Plume Focus Area

  7. Complementing the topsoil information of the Land Use/Land Cover Area Frame Survey (LUCAS with modelled N2O emissions.

    Directory of Open Access Journals (Sweden)

    Emanuele Lugato

    Full Text Available Two objectives of the Common Agricultural Policy post-2013 (CAP, 2014-2020 in the European Union (EU are the sustainable management of natural resources and climate smart agriculture. To understand the CAP impact on these priorities, the Land Use/Cover statistical Area frame Survey (LUCAS employs direct field observations and soil sub-sampling across the EU. While a huge amount of information can be retrieved from LUCAS points for monitoring the environmental status of agroecosystems and assessing soil carbon sequestration, a fundamental aspect relating to climate change action is missing, namely nitrous oxide (N2O soil emissions. To fill this gap, we ran the DayCent biogeochemistry model for more than 11'000 LUCAS sampling points under agricultural use, assessing also the model uncertainty. The results showed that current annual N2O emissions followed a skewed distribution with a mean and median values of 2.27 and 1.71 kg N ha-1 yr-1, respectively. Using a Random Forest regression for upscaling the modelled results to the EU level, we estimated direct soil emissions of N2O in the range of 171-195 Tg yr-1 of CO2eq. Moreover, the direct regional upscaling using modelled N2O emissions in LUCAS points was on average 0.95 Mg yr-1 of CO2eq. per hectare, which was within the range of the meta-model upscaling (0.92-1.05 Mg ha-1 yr-1 of CO2eq. We concluded that, if information on management practices would be made available and model bias further reduced by N2O flux measurement at representative LUCAS points, the combination of the land use/soil survey with a well calibrated biogeochemistry model may become a reference tool to support agricultural, environmental and climate policies.

  8. Developing Information Technology for Vocational Education in Contiguous Destitute Areas Significance, Problems, and Countermeasures: The Case of the Wuling Mountain Area

    Science.gov (United States)

    Wang, Jie; Xu, Fenghua

    2014-01-01

    Using the Wuling Mountain area as a case study, the authors discuss the significance as well as five problems of developing information technology for vocational education in contiguous destitute areas. Recommendations are provided at the end of the article. [Translated by Michelle LeSourd.

  9. Large area SiC coating technology of RBSC for semiconductor processing component

    International Nuclear Information System (INIS)

    Park, Ji Yeon; Kim, Weon Ju

    2001-06-01

    As the semiconductor process is developed for the larger area wafer and the larger-scale integration, the processing fixtures are required to have excellent mechanical and high temperature properties. This highlights the importance of silicon carbide-based materials as a substitute for quartz-based susceptors. In this study, SiC coating technology on reaction sintered (RS) SiC with thickness variation of +/- 10% within a diameter of 8 inch by low pressure chemical vapor deposition has been developed for making a plate type SiC fixture such as heater, baffle, etc., with a diameter of 12 inch. Additionally, a state of art on fabrication technology and products of the current commercial SiC fixtures has been described

  10. [Application of three-dimensional technology in assessment of burn area and treatment strategy of burns].

    Science.gov (United States)

    Sheng, Wen-bo; Dong, Guosheng; Wan, Yan; Yao, Li; Tang, Hongtai; Xia, Zhaofan

    2014-08-01

    Accurate area assessment of a burn injury and its treatment according to its depth of injury are the foundation of burn treatment due to its complexity, and various techniques and methods have been employed to solve these problems for many years. As the demand of modern medicine calls for individualized and precise therapeutic measures, it is clear that the traditional diagnostic and treatment measures are insufficient. The flourishing development of three-dimensional (3D) technology seems to provide new research approaches and technical opporturities for burn surgery. A series of techniques such as 3D model, 3D scanning, and 3D printing may be promising in advancing burn surgery through basic research to achieve rational clinical applications in the future. In this paper, the applications and achievements of 3D technology in burn surgery in recent years are summarized.

  11. Technology of surface wastewater purification, including high-rise construction areas

    Science.gov (United States)

    Tsyba, Anna; Skolubovich, Yury

    2018-03-01

    Despite on the improvements in the quality of high-rise construction areas and industrial wastewater treatment, the pollution of water bodies continues to increase. This is due to the organized and unorganized surface untreated sewage entry into the reservoirs. The qualitative analysis of some cities' surface sewage composition is carried out in the work. Based on the published literature review, the characteristic contamination present in surface wastewater was identified. The paper proposes a new technology for the treatment of surface sewage and presents the results of preliminary studies.

  12. Nuclear technology and societal needs

    International Nuclear Information System (INIS)

    2004-11-01

    This volume aims to review the present status of development of nuclear technologies and their applications in the country and also to make projections for future requirements. This will also cover state-of-the-art technologies in these areas. The following topics are covered in detail: nuclear technologies for water desalination, water resources development and management using nuclear technology, industrial applications of isotopes and radiation technology, radiation technology in health care, nuclear technology for food preservation, agricultural applications of nuclear technology. Papers relevant to INIS are indexed separately

  13. Competitive policies in the Nordic energy research and innovation area - eNERGIA : Part 2: Technology reports

    Energy Technology Data Exchange (ETDEWEB)

    Klitkou, Antje; Pedersen, Trond Einar; Scordato, Lisa; Mariussen, Aage

    2008-07-01

    This (Part 2: Technology reports) is the second report about the results from the eNERGIA project. The first report deals with the countries covered by the eNERGIA project, while the third report sums up the SWOT-analysis, the eNERGIA workshops and the case studies of good practice. A short synthesis report summarises the entire project. This second report mainly deals with selected renewable energy technologies from different perspectives. The report comprises the following nine chapters. Chapter 1 is the presentation of the selected renewable technologies (solar photovoltaic technology, wind technology, 2nd generation bio-energy technology, wave technology and hydroelectric technology) and a subsequent elaboration of the status of the technologies in the Nordic and Baltic countries. Chapter 2 gives an overview of patterns of international R&D collaboration as seen from the countries in question. Chapter 3 draws on technology specific patenting data and bibliometric data, describing the level of technology specific activity in each country. Chapter 4 and 5 describe the status of renewable energy production and renewable energy research respectively in each country. The four last chapters are relatively brief descriptions of the situation in the Nordic and Baltic countries. Chapter 6 gives an overview of the venture capital situation. Chapter 7 is about market regulations and Chapter 8 is about social concerns. Finally, Chapter 9 addresses infrastructural challenges. (Author) 77 figs., 70 tabs

  14. Communicating in English for Science and Technology

    DEFF Research Database (Denmark)

    Mousten, Birthe

    Communicating in English for Science and Technology covers some of the most important questions in connection with communication models, stylistics and genre conventions within the area of English used in science and technology texts. Moreover,knowledge management, terminology management...

  15. Project inspection using mobile technology - phase I : an investigation into existing business processes and areas for improvement using mobile technology.

    Science.gov (United States)

    2013-08-01

    As mobile technology becomes widely available and affordable, transportation agencies can use this technology to : streamline operations involved within project inspection. This research, conducted in two phases, identified : opportunities for proces...

  16. A large-area strain sensing technology for monitoring fatigue cracks in steel bridges

    Science.gov (United States)

    Kong, Xiangxiong; Li, Jian; Collins, William; Bennett, Caroline; Laflamme, Simon; Jo, Hongki

    2017-08-01

    This paper presents a novel large-area strain sensing technology for monitoring fatigue cracks in steel bridges. The technology is based on a soft elastomeric capacitor (SEC), which serves as a flexible and large-area strain gauge. Previous experiments have verified the SEC’s capability to monitor low-cycle fatigue cracks experiencing large plastic deformation and large crack opening. Here an investigation into further extending the SEC’s capability for long-term monitoring of fatigue cracks in steel bridges subject to traffic loading, which experience smaller crack openings. It is proposed that the peak-to-peak amplitude (pk-pk amplitude) of the sensor’s capacitance measurement as the indicator of crack growth to achieve robustness against capacitance drift during long-term monitoring. Then a robust crack monitoring algorithm is developed to reliably identify the level of pk-pk amplitudes through frequency analysis, from which a crack growth index (CGI) is obtained for monitoring fatigue crack growth under various loading conditions. To generate representative fatigue cracks in a laboratory, loading protocols were designed based on constant ranges of stress intensity to limit plastic deformations at the crack tip. A series of small-scale fatigue tests were performed under the designed loading protocols with various stress intensity ratios. Test results under the realistic fatigue crack conditions demonstrated the proposed crack monitoring algorithm can generate robust CGIs which are positively correlated with crack lengths and independent from loading conditions.

  17. Securing Canada’s Information-Technology Infrastructure: Context, Principles, and Focus Areas of Cybersecurity Research

    Directory of Open Access Journals (Sweden)

    Dan Craigen

    2013-07-01

    Full Text Available This article addresses the challenges of cybersecurity and ultimately the provision of a stable and resilient information-technology infrastructure for Canada and, more broadly, the world. We describe the context of current cybersecurity challenges by synthesizing key source material whose importance was informed by our own real-world experiences. Furthermore, we present a checklist of guiding principles to a unified response, complete with a set of action-oriented research topics that are linked to known operational limitations. The focus areas are used to drive the formulation of a unified and relevant research and experimental development program, thereby moving us towards a stable and resilient cyberinfrastructure. When cybersecurity is viewed as an inherently interdisciplinary problem of societal concern, we expect that fundamentally new research perspectives will emerge in direct response to domain-specific protection requirements for information-technology infrastructure. Purely technical responses to cybersecurity challenges will be inadequate because human factors are an inherent aspect of the problem. This article will interest managers and entrepreneurs. Senior management teams can assess new technical developments and product releases to fortify their current security solutions, while entrepreneurs can harness new opportunities to commercialize novel technology to solve a high-impact cybersecurity problem..

  18. Pipe Crawler internal piping characterization system. Deactivation and decommissioning focus area. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    1998-02-01

    Pipe Crawler reg-sign is a pipe surveying system for performing radiological characterization and/or free release surveys of piping systems. The technology employs a family of manually advanced, wheeled platforms, or crawlers, fitted with one or more arrays of thin Geiger Mueller (GM) detectors operated from an external power supply and data processing unit. Survey readings are taken in a step-wise fashion. A video camera and tape recording system are used for video surveys of pipe interiors prior to and during radiological surveys. Pipe Crawler reg-sign has potential advantages over the baseline and other technologies in areas of cost, durability, waste minimization, and intrusiveness. Advantages include potentially reduced cost, potential reuse of the pipe system, reduced waste volume, and the ability to manage pipes in place with minimal disturbance to facility operations. Advantages over competing technologies include potentially reduced costs and the ability to perform beta-gamma surveys that are capable of passing regulatory scrutiny for free release of piping systems

  19. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  20. Age- and gender-dependent urinary iodine concentrations in an area-covering population sample from the Bernese region in Switzerland.

    Science.gov (United States)

    Als, C; Keller, A; Minder, C; Haldimann, M; Gerber, H

    2000-11-01

    Before a scheduled increase of salt iodide content up to 20 p.p.m. in Switzerland, urinary iodine concentration (UIC, microg/l) of a randomly selected, area-covering, age-stratified population subgroup was sampled in spring 1997. In contrast to former published studies on UIC, we minimized biases by age, gender, rural/urban, socio-economic and cultural influences. We contacted 750 households in the Bernese region using random telephone numbers. Per household, one proband selected by play dice collected a spot urine sample. We defined seven age categories: infants, children, adolescents, adults I-III and seniors, aged 0-5, 6-12, 13-20, 21-35, 36-50, 51-65 and >65 years respectively. Randomized UIC data were compared with WHO criteria of iodine deficiency (ID) and previous non-randomized, age-dependent Swiss UIC data. To recruit a perfect random group of volunteers proved difficult, as study participation of adolescent and male populations was somewhat lower than that of elder and female (PID (94 microg/l). UIC varied significantly between age categories (P=0. 0006). Women had lower UIC than men (P=0.014). Infants had no ID. Women in child-bearing age (13-35 years), adults II, adults III and seniors had mild ID. Compared with recommended supplies of 150 and 200 microg I/day in children and male adolescents respectively, we consider their UIC (110 and 144 microg/l) as at least borderline deficient. Absolute UIC was lowest in seniors. Probands from rural/suburban households had similar UICs. Our UIC data were comparable to published ones. Despite long-term national efforts with iodized salt (15 p.p.m. in 1997), mild ID still prevailed in Bern in spring 1997, with rare extreme UIC values. Mild ID with women in child-bearing age (and probably also with children and male adolescents) was a serious concern, as goiter growth with puberty or pregnancy might be the consequence. Mild ID in adults and seniors might be due to restricted NaCl intake. Results of our randomly

  1. Inappropriate Dietary and Occupational Patterns: Major Risk Factors Associated With Brucellosis in the Area Covered by Karaj Health Center No. 2

    Directory of Open Access Journals (Sweden)

    Yosef Khani

    2015-11-01

    Full Text Available Background: Brucellosis is one of the most common diseases among humans and livestock. Using contaminated and unpasteurized dairy products, having contact with infected livestock and, in general, inappropriate dietary patterns, as well as lack of hygiene, can be noted as the most common modes of transmission for such a disease. Objectives: Since the establishment of Alborz province in Iran and, accordingly, Alborz university of medical sciences, Karaj, Iran, there has been no study on the epidemiological situation of the disease. Therefore, the present study examines the epidemiology of Brucellosis at Karaj Health center No. 2, Karaj, Iran, during 2011 - 2012. Patients and Methods: This research was a cross-sectional descriptive study, on patients with Brucellosis, during 2011 - 2012, in the area covered by Karaj health center No. 2, Karaj, Iran. The data about all suspected cases, collected from polyclinic, laboratories and health centers, and confirmed by Wright, combs Wright and 2ME tests were reviewed. After recording the demographic data and laboratory results, they were entered into STATA 11 software and analyzed. Results: The number of patients reported in this study was 67. The incidence of the disease during 2011 - 2012 was, respectively, 3.75 and 4.6 per hundred thousand and the average incidence of the disease was 4.2 per hundred thousand. The highest rate of infection, in terms of occupation, was found among ranchers (40.29%. In 100% of the cases, there was a history of consumption of cottage cheese, fresh cow milk or other unpasteurized dairy products. Considering the incidence season, most cases of the disease (38.80% had occurred in the spring. In terms of gender, 56.71% were male and 43.28% of patients were female. As well, in terms of age, more 50% of the patients were in the age groups of 31 - 40 and 41 - 50 years old. Conclusions: Given the occurrence of more cases of the disease among individuals with risk factors, such as

  2. [A preliminary clinical study on endoscopic measurement of lesion area with the method of digital image processing technology].

    Science.gov (United States)

    Zhang, Lei; Wang, Zhihua; Fu, Zhongqian; Fang, Pengcheng; Ling, Kai; Xu, Jianming; Kong, Derun; Xu, Zhangwei

    2013-10-01

    It is of great importance to measure the lesion area in scientific research and clinical practice. The present study aims to solve barrel distortion and measure lesion area with the technology of computer visualization. With the ultimate purpose to obtain the precise lesion area, the study, based on the original endoscopy system and digital image processing technology, dealt with the correction of barrel distortion by lens adjustment, calculated the gastric ulcer area with the aid of Qt database and finally developed an image processing software--Endoscope Assistant (EAS). The results showed that the EAS was accurate in vitro. It was employed to measure the gastric ulcer area of 45 patients and the results were compared with the traditional formula method. It could be well concluded that this technology is safe, accurate and economical for measuring gastric ulcer area.

  3. Technology strategy for integrated operations and real time reservoir management; Technology Target Areas; TTA5 - Integrated operations and RTRM

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    In Norway Integrated Operations (IO) is a concept which in the first phase (G1) has been used to describe how to integrate processes and people onshore and offshore using ICT solutions and facilities that improve onshore's ability to support offshore operationally. The second generation (G2) Integrated Operations aims to help operators utilize vendors' core competencies and services more efficiently. Utilizing digital services and vendor products, operators will be able to update reservoir models, drilling targets and well trajectories as wells are drilled, manage well completions remotely, optimize production from reservoir to export lines, and implement condition-based maintenance concepts. The total impact on production, recovery rates, costs and safety will be profound. When the international petroleum business moves to the Arctic region the setting is very different from what is the case on the Norwegian Continental Shelf (NCS) and new challenges will arise. The Norwegian Ministry of Environment has recently issued an Integrated Management Plan for the Barents Sea where one focus is on 'Monitoring of the Marine Environment in the North'. The Government aims to establish a new and more coordinated system for monitoring the marine ecosystems in the north. A representative group consisting of the major Operators, the Service Industry, Academia and the Authorities have developed the enclosed strategy for the OG21 Integrated Operations and Real Time Reservoir Management (IO and RTRM) Technology Target Area (TTA). Major technology and work process research and development gaps have been identified in several areas: Bandwidth down-hole to surface; Sensor development including Nano-technology; Cross discipline use of Visualisation, Simulation and model development particularly in Drilling and Reservoir management areas; Software development in terms of data handling, model updating and calculation speed; Enabling reliable and robust communications

  4. Analysis of an Interactive Technology Supported Problem-Based Learning STEM Project Using Selected Learning Sciences Interest Areas (SLSIA)

    Science.gov (United States)

    Kumar, David Devraj

    2017-01-01

    This paper reports an analysis of an interactive technology-supported, problem-based learning (PBL) project in science, technology, engineering and mathematics (STEM) from a Learning Sciences perspective using the Selected Learning Sciences Interest Areas (SLSIA). The SLSIA was adapted from the "What kinds of topics do ISLS [International…

  5. Job Satisfaction among Information Technology Professionals in the Washington DC Area: An Analysis Based on the Minnesota Satisfaction Questionnaire

    Science.gov (United States)

    Diala, Ify S.

    2010-01-01

    Information technology (IT) has in the recent times dominated all aspect of the business world, and, for this reason, today's business environment is more challenging and more dynamic than in previous years. Therefore, this study focused on examining job satisfaction of Information Technology professionals in the D.C. area, paying particular…

  6. Final technology report for D-Area oil seepage basin bioventing optimization test, environmental restoration support

    International Nuclear Information System (INIS)

    Radway, J.C.; Lombard, K.H.; Hazen, T.C.

    1997-01-01

    One method proposed for the cleanup of the D-Area Oil Seepage Basin was in situ bioremediation (bioventing), involving the introduction of air and gaseous nutrients to stimulate contaminant degradation by naturally occurring microorganisms. To test the feasibility of this approach, a bioventing system was installed at the site for use in optimization testing by the Environmental Biotechnology Section of the Savannah River Technology Center. During the interim action, two horizontal wells for a bioventing remediation system were installed eight feet below average basin grade. Nine piezometers were also installed. In September of 1996, a generator, regenerative blower, gas cylinder station, and associated piping and nutrient injection equipment were installed at the site and testing was begun. After baseline characterization of microbial activity and contaminant degradation at the site was completed, four injection campaigns were carried out. These consisted of (1) air alone, (2) air plus triethylphosphate (TEP), (3) air plus nitrous oxide, and (4) air plus methane. This report describes results of these tests, together with conclusions and recommendations for further remediation of the site. Natural biodegradation rates are high. Oxygen, carbon dioxide, and methane levels in soil gas indicate substantial levels of baseline microbial activity. Oxygen is used by indigenous microbes for biodegradation of organics via respiration and hence is depleted in the soil gas and water from areas with high contamination. Carbon dioxide is elevated in contaminated areas. High concentrations of methane, which is produced by microbes via fermentation once the oxygen has been depleted, are found at the most contaminated areas of this site. Groundwater measurements also indicated that substantial levels of natural contaminant biodegradation occurred prior to air injection

  7. Southwest Research Institute assistance to NASA in biomedical areas of the technology

    Science.gov (United States)

    Culclasure, D. F.; Eckhardt, L.

    1971-01-01

    Significant applications of aerospace technology were achieved. These applications include: a miniaturized, noninvasive system to telemeter electrocardiographic signals of heart transplant patients during their recuperative period as graded situations are introduced; and economical vital signs monitor for use in nursing homes and rehabilitation hospitals to indicate the onset of respiratory arrest; an implantable telemetry system to indicate the onset of the rejection phenomenon in animals undergoing cardiac transplants; an exceptionally accurate current proportional temperature controller for pollution studies; an automatic, atraumatic blood pressure measurement device; materials for protecting burned areas in contact with joint bender splints; a detector to signal the passage of animals by a given point during ecology studies; and special cushioning for use with below-knee amputees to protect the integrity of the skin at the stump/prosthesis interface.

  8. Near-Field Coupling Communication Technology For Human-Area Networking

    Directory of Open Access Journals (Sweden)

    Ryoji Nagai

    2012-12-01

    Full Text Available We propose a human-area networking technology that uses the surface of the human body as a data transmission path and uses near-field coupling TRXs. This technology aims to achieve a "touch and connect" form of communication and a new concept of "touch the world" by using a quasi-electrostatic field signal that propagates along the surface of the human body. This paper explains the principles underlying near-field coupling communication. Special attention has been paid to common-mode noise since our communication system is strongly susceptible to this. We designed and made a common-mode choke coil and a transformer to act as common-mode noise filters to suppress common-mode noise. Moreover, we describe how we evaluated the quality of communication using a phantom model with the same electrical properties as the human body and present the experimental results for the packet error rate (PER as a function of the signal to noise ratio (SNR both with the common-mode choke coil or the transformer and without them. Finally, we found that our system achieved a PER of less than 10-2 in general office rooms using raised floors, which corresponded to the quality of communication demanded by communication services in ordinary office spaces.

  9. EM-50 Tanks Focus Area retrieval process development and enhancements. FY97 technology development summary report

    International Nuclear Information System (INIS)

    Rinker, M.W.; Bamberger, J.A.; Alberts, D.G.

    1997-09-01

    The Retrieval Process Development and Enhancements (RPD and E) activities are part of the US Department of Energy (DOE) EM-50 Tanks Focus Area, Retrieval and Closure program. The purpose of RPD and E is to understand retrieval processes, including emerging and existing technologies, and to gather data on these processes, so that end users have requisite technical bases to make retrieval decisions. Technologies addressed during FY97 include enhancements to sluicing, the use of pulsed air to assist mixing, mixer pumps, innovative mixing techniques, confined sluicing retrieval end effectors, borehole mining, light weight scarification, and testing of Russian-developed retrieval equipment. Furthermore, the Retrieval Analysis Tool was initiated to link retrieval processes with tank waste farms and tank geometric to assist end users by providing a consolidation of data and technical information that can be easily assessed. The main technical accomplishments are summarized under the following headings: Oak Ridge site-gunite and associated tanks treatability study; pulsed air mixing; Oak Ridge site-Old Hydrofracture Facility; hydraulic testbed relocation; cooling coil cleaning end effector; light weight scarifier; innovative tank mixing; advanced design mixer pump; enhanced sluicing; Russian retrieval equipment testing; retrieval data analysis and correlation; simulant development; and retrieval analysis tool (RAT)

  10. Solar efficient technologies for valorising an archaeological site in the rural area Romania

    Science.gov (United States)

    Tǎmǎşan, Maria; Mǎrǎcineanu, Cristian; Bica, Smaranda Maria

    2015-12-01

    The purpose of the study is finding viable methods of rehabilitation and re-use of the cultural heritage in rural areas by efficient contemporary technological and architectural solutions. In this respect, this paper describes the phases of an environmental-friendly intervention on an archaeological site near the village Şiria, Arad County, as case study, the expected results and the steps which must be taken in order to implement the proposal. The final aim is to create a complex and sustainable tourist attraction through musealisation, integrated in the already known, but poorly promoted tourist itinerary, known as The Wine Path - Şiria is in a wine-growing region first documented in the 9th century. The proposed design reflects our sustainable approach by combining local materials with non-invasive structural solutions and efficient solar technologies. The purpose of this approach is to reduce the building's maintenance costs nearly to 0 and to extend the visiting time of the archaeological site during the entire year, whatever the weather or season. The proposals are to be submitted to the County Council, having issued the Strategy for Tourist Development for Arad County, elaborated in 2011 by The Analysis for Institutional Development Centre - Bucharest.

  11. August Cover 09 Tp

    Indian Academy of Sciences (India)

    Admin

    The course will cover topics selected mostly from post-graduate curriculum in the broad areas of classical and quantum mechanics, electrodynamics, special relativity, mathematical methods, and statistical physics. The lectures will be supplemented by discussion and problem sessions. Teachers who wish to participate may ...

  12. Sganzerla Cover

    Directory of Open Access Journals (Sweden)

    Victor da Rosa

    2014-06-01

    Full Text Available Neste artigo, realizo uma leitura do cinema de Rogério Sganzerla, desde o clássico O bandido da luz vermelha até os documentários filmados na década de oitenta, a partir de duas noções centrais: cover e over. Para isso, parto de uma controvérsia com o ensaio de Ismail Xavier, Alegorias do subdesenvolvimento, em que o crítico realiza uma leitura do cinema brasileiro da década de sessenta através do conceito de alegoria; depois releio uma série de textos críticos do próprio Sganzerla, publicados em Edifício Sganzerla, procurando repensar as ideias de “herói vazio” ou “cinema impuro” e sugerindo assim uma nova relação do seu cinema com o tempo e a representação; então busco articular tais ideias com certos procedimentos de vanguarda, como a falsificação, a cópia, o clichê e a colagem; e finalmente procuro mostrar que, no cinema de Sganzerla, a partir principalmente de suas reflexões sobre Orson Welles, a voz é usada de maneira a deformar a interpretação naturalista.

  13. Factors Influencing Farmers’ Adoption of Soil and Water Control Technology (SWCT in Keita Valley, a Semi-Arid Area of Niger

    Directory of Open Access Journals (Sweden)

    Boureima Yacouba Karidjo

    2018-01-01

    Full Text Available The AderDoutchiMaggia in Niger, as with other Sahelian zones, undergoes a process of climatic deterioration, which combines with the growing social and economic needs of the increasing population and causes a general economic crisis. Land degradation due to biophysical factors requires that priority action be given to land reclamation and soil conservation and to activities intended to increase agricultural production. This paper takes a look at socio-economic and established factors affecting the adoption of soil and water control technology (SWCT in Keita valley, a semi-arid area in the central of Niger. Well-designed questionnaire survey on key agents was used to gather the indispensable data from farm ménages. The binary dichotomous logistic regression model prognosticated six factors to be affecting the adoption of soil and water control technology in Keita. These variables cover the gender of the respondent, age of the household’s head, income evolution within the family, small craft referring to off farm income, training provide by local institutions, use of credit and, possession of full rights on land and its resources. The results revealed that diffusion of adoption from local organized community is a good alternative to increase the adoption of soil and water control technology in Keita valley agriculture system in Niger. Researchers and policy makers should conceive proper strategies and agenda reflecting the farmers’ interest, position and restriction in advocating new technologies for greater assumption and adoption by the farmers.

  14. Research of Ancient Architectures in Jin-Fen Area Based on GIS&BIM Technology

    Science.gov (United States)

    Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

    2017-05-01

    The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation & restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching & collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS&BIM technology, could be constructed to support the

  15. Research of Ancient Architectures in Jin-Fen Area Based on GIS and BIM Technology

    International Nuclear Information System (INIS)

    Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

    2017-01-01

    The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation and restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching and collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS and BIM technology, could be constructed to support

  16. Learning transfer of geospatial technologies in secondary science and mathematics core areas

    Science.gov (United States)

    Nielsen, Curtis P.

    The purpose of this study was to investigate the transfer of geospatial technology knowledge and skill presented in a social sciences course context to other core areas of the curriculum. Specifically, this study explored the transfer of geospatial technology knowledge and skill to the STEM-related core areas of science and mathematics among ninth-grade students. Haskell's (2001) research on "levels of transfer" provided the theoretical framework for this study, which sought to demonstrate the experimental group's higher ability to transfer geospatial skills, higher mean assignment scores, higher post-test scores, higher geospatial skill application and deeper levels of transfer application than the control group. The participants of the study consisted of thirty ninth-graders enrolled in U.S. History, Earth Science and Integrated Mathematics 1 courses. The primary investigator of this study had no previous classroom experiences with this group of students. The participants who were enrolled in the school's existing two-section class configuration were assigned to experimental and control groups. The experimental group had ready access to Macintosh MacBook laptop computers, and the control group had ready access to Macintosh iPads. All participants in U.S. History received instruction with and were required to use ArcGIS Explorer Online during a Westward Expansion project. All participants were given the ArcGIS Explorer Online content assessment following the completion of the U.S. History project. Once the project in U.S. History was completed, Earth Science and Integrated Mathematics 1 began units of instruction beginning with a multiple-choice content pre-test created by the classroom teachers. Experimental participants received the same unit of instruction without the use or influence of ArcGIS Explorer Online. At the end of the Earth Science and Integrated Math 1 units, the same multiple-choice test was administered as the content post-test. Following the

  17. Accuracy of Sea Ice Data from Remote Sensing Methods, its Impact on Safe Speed Determination and Planning of Voyage in Ice-Covered Areas

    Directory of Open Access Journals (Sweden)

    Tadeusz Pastusiak

    2016-07-01

    Full Text Available The data related to ice floe concentration and ice thickness were analysed. Sources of data have been verified by visual observation and by comparison in between information from different remote sensing sources. The results of this work exceeded initial expectations. The discrepancies of the information provided by various data sources result from the error of the measurement method, which can be as high as 15% of the concentration of ice floes. It should also be borne in mind that the more generalized information about the state of the ice cover, the lower probability of detection of ice floe patches of a high concentration and spatial extent. Each vessel that is planning voyage in ice should take into consideration inaccurate estimation of concentration and thickness of ice floes received by means of satellite remote sensing methods. The method of determining permissible speed of various ice class vessel in ice on basis of safe speed graph for the icebreaker was developed. A well-defined equation approximates relationship between speed of the icebreaker and the vessels of specified ice classes. Average distance of 24.1 Nm from sea ice extent line was related to all analysed lines representing 30-40% ice floe concentration (IUP product excluded and 30.6 Nm for analysed lines representing 70-81-91% ice floe concentration. The maximal average distance of the furthest analysed line (IUP product excluded was equal 37.2 Nm. The average standard deviation of that results was equal 8.3 Nm only. Average distances of analysed lines from sea ice extent line to maximal ice data values were found as follow: 8.4 Nm (23% for NSIDC-CCAR ice age, 12.3 Nm (33% for minimal distance of 30-40% ice concentration, 15.4 Nm (41% for OSISAF ice type “ambiguous” zone from Open Water side, 25 Nm (67% for minimal distance of 70-81-91% ice concentration, 26.6 Nm (72% for OSISAF ice type “ambiguous” zone from 1st year ice age side, 35.9 Nm (97% for maximal distance

  18. Feature article. Current state and problems of modeling and simulation technologies in the area of light water reactor

    International Nuclear Information System (INIS)

    Koshizuka, Seiichi; Okamoto, Koji; Tanaka, Shunichi; Morii, Tadashi; Nakamura, Takashi; Yamamoto, Akio; Okajima, Narimitsu

    2011-01-01

    This special feature article consisted of seven reports summarizing discussions at the workshop on 'modeling and simulation technologies' held in early March 2011. These technologies were one of the most important strategic technologies among nuclear basic researches. Simulation technologies and Verification and Validation (V and V), problems of US software used in Japan and light water reactor simulation technology in regulating agency were overviewed. Experts in the area of thermo hydraulics and safety analysis, particle transport analysis and reactor physics and core analysis detailed current state and problems of simulation technologies. Standardization of V and V, development of original computer code and establishment of experimental database with assured accuracy for V and V should be conducted in Japan. (T. Tanaka)

  19. PROBLEMS OF PROTECTION OF URBAN AREAS FROM RADIONUCLIDES STRONTIUM-90 AND CAESIUM-137 AFTER TECHNOLOGICAL DISASTERS

    Directory of Open Access Journals (Sweden)

    Olga Cheremisina

    2017-05-01

    Full Text Available The methods of decontamination of radionuclides from soils are considered. The literature focuses on fixing radionuclides in soils and creating geochemical barriers that it is prevent the spread of pollution. The main disadvantage of these methods is exclude the possibility of building a territory. It is need to clean up the area to the sanitary and hygienic requirements for further use and then it is desirable to fix the residual activity. Carried out an analysis of forms of radionuclides fixation in soils and mechanics of this fixation, therewith revealed that Cs-137 fixed more strongly on mineral component of soil, than Sr-90, which is mainly in the acid-soluble and exchangeable form, and, as a consequence, passes into the liquid phase during soil deactivation more easily. Contaminated soil deactivation in the urbanized territory is possible by washing it by ferric chloride solution at a concentration 0.02-0.05 M and with an equimolar addition of an ammonium chloride. Therewith most efficient methods, which used in-situ conditions, are heap and convection leaching technologies with treatment degree, which not less than 80%. At the same time, the most efficient methods which used in-situ conditions are heap and the convection leaching. The hardware-technological scheme of a convection leaching is presented. Noted that ammonium salts additions slightly rising coefficient of treatment from Sr-90. Because ammonium salts aren’t expensive, their additions allow to obtain significant economic benefits due to decreasing of ferric chloride consumption, which is more valuable, and waste water volume reduction.

  20. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

  1. Debris-covered glacier anomaly? Morphological factors controlling changes in the mass balance, surface area, terminus position, and snow line altitude of Himalayan glaciers

    Science.gov (United States)

    Salerno, Franco; Thakuri, Sudeep; Tartari, Gianni; Nuimura, Takayuki; Sunako, Sojiro; Sakai, Akiko; Fujita, Koji

    2017-08-01

    What are the main morphological factors that control the heterogeneous responses of debris-covered glaciers to climate change in the southern central Himalaya? A debate is open whether thinning rates on debris-covered glaciers are comparable to those of debris-free ones. Previous studies have adopted a deterministic approach, which is indispensable, but is also limiting in that only a few glaciers can be monitored. In this context, we propose a statistical analysis based on a wider glacier population as a complement to these deterministic studies. We analysed 28 glaciers situated on the southern slopes of Mt. Everest in the central southern Himalaya during the period 1992-2008. This study combined data compiled by three distinct studies for a common period and population of glaciers for use in a robust statistical analysis. Generally, surface gradient was the main morphological factor controlling the features and responses of the glaciers to climate change. In particular, the key points that emerged are as follows. 1) Reduced downstream surface gradient is responsible for increased glacier thinning. 2) The development of supraglacial ponds is a further controlling factor of glacier thinning: where supraglacial ponds develop, the glaciers register further surface lowering. 3) Debris coverage and thickness index were not found to be significantly responsible for the development of supraglacial ponds, changes in elevation, or shifts in snow line altitude.

  2. Campus Technology Innovators Awards 2010

    Science.gov (United States)

    Lloyd, Meg; Raths, David

    2010-01-01

    Each year in judging the Campus Technology Innovators awards, the authors have the privilege of reading through hundreds of fascinating examples of technology innovation on campus. Nominated projects cover the gamut of technology areas, from assessment and advising to wireless and web 2.0. This article presents 11 innovator award winners of this…

  3. Technology and automation of atomic power engineering and industry. TAAPEI-2009. Materials of branch scientific and technical conference covers the fiftieth anniversary of the Seversk State Engineering Academy

    International Nuclear Information System (INIS)

    2009-01-01

    Materials of the branch scientific and technical conference Technology and automation of atomic power engineering and industry (18-22 May, 2009, Seversk) are performed. Scientific and practical results of investigations into chemical technological developments, creation of machinery and apparatuses, automation of technological processes, application of present-day information technologies in atomic industry as well as ecological and nuclear weapons proliferation problems are shown. Besides issues of professional education and social-economic problems of the atomic branch are considered [ru

  4. A multispectral scanner survey of the Rocky Flats Environmental Technology Site and surrounding area, Golden, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Brewster, S.B. Jr.; Brickey, D.W.; Ross, S.L.; Shines, J.E.

    1997-04-01

    Aerial multispectral scanner imagery was collected of the Rocky Flats Environmental Technology Site in Golden, Colorado, on June 3, 5, 6, and 7, 1994, using a Daedalus AADS1268 multispectral scanner and coincident aerial color and color infrared photography. Flight altitudes were 4,500 feet (1372 meters) above ground level to match prior 1989 survey data; 2,000 feet (609 meters) above ground level for sitewide vegetation mapping; and 1,000 feet (304 meters) above ground level for selected areas of special interest. A multispectral survey was initiated to improve the existing vegetation classification map, to identify seeps and springs, and to generate ARC/INFO Geographic Information System compatible coverages of the vegetation and wetlands for the entire site including the buffer zone. The multispectral scanner imagery and coincident aerial photography were analyzed for the detection, identification, and mapping of vegetation and wetlands. The multispectral scanner data were processed digitally while the color and color infrared photography were manually photo-interpreted to define vegetation and wetlands. Several standard image enhancement techniques were applied to the multispectral scanner data to assist image interpretation. A seep enhancement was applied and a color composite consisting of multispectral scanner channels 11, 7, and 5 (thermal infrared, mid-infrared, and red bands, respectively) proved most useful for detecting seeps, seep zones, and springs. The predawn thermal infrared data were also useful in identifying and locating seeps. The remote sensing data, mapped wetlands, and ancillary Geographic Information System compatible data sets were spatially analyzed for seeps.

  5. A multispectral scanner survey of the Rocky Flats Environmental Technology Site and surrounding area, Golden, Colorado

    International Nuclear Information System (INIS)

    Brewster, S.B. Jr.; Brickey, D.W.; Ross, S.L.; Shines, J.E.

    1997-04-01

    Aerial multispectral scanner imagery was collected of the Rocky Flats Environmental Technology Site in Golden, Colorado, on June 3, 5, 6, and 7, 1994, using a Daedalus AADS1268 multispectral scanner and coincident aerial color and color infrared photography. Flight altitudes were 4,500 feet (1372 meters) above ground level to match prior 1989 survey data; 2,000 feet (609 meters) above ground level for sitewide vegetation mapping; and 1,000 feet (304 meters) above ground level for selected areas of special interest. A multispectral survey was initiated to improve the existing vegetation classification map, to identify seeps and springs, and to generate ARC/INFO Geographic Information System compatible coverages of the vegetation and wetlands for the entire site including the buffer zone. The multispectral scanner imagery and coincident aerial photography were analyzed for the detection, identification, and mapping of vegetation and wetlands. The multispectral scanner data were processed digitally while the color and color infrared photography were manually photo-interpreted to define vegetation and wetlands. Several standard image enhancement techniques were applied to the multispectral scanner data to assist image interpretation. A seep enhancement was applied and a color composite consisting of multispectral scanner channels 11, 7, and 5 (thermal infrared, mid-infrared, and red bands, respectively) proved most useful for detecting seeps, seep zones, and springs. The predawn thermal infrared data were also useful in identifying and locating seeps. The remote sensing data, mapped wetlands, and ancillary Geographic Information System compatible data sets were spatially analyzed for seeps

  6. Analysing the Effects of Flood-Resilience Technologies in Urban Areas Using a Synthetic Model Approach

    Directory of Open Access Journals (Sweden)

    Reinhard Schinke

    2016-11-01

    Full Text Available Flood protection systems with their spatial effects play an important role in managing and reducing flood risks. The planning and decision process as well as the technical implementation are well organized and often exercised. However, building-related flood-resilience technologies (FReT are often neglected due to the absence of suitable approaches to analyse and to integrate such measures in large-scale flood damage mitigation concepts. Against this backdrop, a synthetic model-approach was extended by few complementary methodical steps in order to calculate flood damage to buildings considering the effects of building-related FReT and to analyse the area-related reduction of flood risks by geo-information systems (GIS with high spatial resolution. It includes a civil engineering based investigation of characteristic properties with its building construction including a selection and combination of appropriate FReT as a basis for derivation of synthetic depth-damage functions. Depending on the real exposition and the implementation level of FReT, the functions can be used and allocated in spatial damage and risk analyses. The application of the extended approach is shown at a case study in Valencia (Spain. In this way, the overall research findings improve the integration of FReT in flood risk management. They provide also some useful information for advising of individuals at risk supporting the selection and implementation of FReT.

  7. Enabling Technologies for Fabrication of Large Area Flexible Antennas, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — MesoScribe Technologies, a high tech start-up from SUNY-Stony Brook, proposes to apply a breakthrough new direct writing technology to meet the objectives set-forth...

  8. Floating nuclear power plants and associated technologies in the Northern areas

    International Nuclear Information System (INIS)

    Dowdall, M.; Standring, W.J.F.

    2008-12-01

    Although floating nuclear power plants are not a new concept, all indications are that Russia, amongst other countries, has identified FNPP's (floating nuclear power plants) as one of a range of potential power solutions for both the domestic and international commercial market, utilising LCNPP's (low-capacity nuclear power plants). This focus on LCNPP's in general and LCNPP's in particular appears to be a key part of Russia's positioning of itself as a future leader in the global nuclear energy market. Given the fact that much of the support infrastructure for Russia's existing civilian nuclear fleet is located in the northern regions, the development of FNPP's as part of the nuclear industry is a matter of some interest to a number of countries including Norway. Although FNPP technology is not new, the business models being proposed to effectively commercialise FNPP's as a product on the international market are somewhat novel. This novelty may place FNPP's in a relatively grey area with respect to international laws and regulations. This situation is however also a product of recent developments and initiatives regarding the global nuclear industry and how it operates in the 21st century and the consideration of such business models by countries other than Russia means that it may not be unique to either FNPP's or Russia. A review of the available information indicates that FNPP's may be constructed, located and operated in the Russian Arctic region for a variety of purposes (civilian power/heat generation, resource extraction etc.) as well as being made available for export internationally for purposes such as desalination. Russia is and has been engaged in marketing of such systems to a wide range of potential customers. Information as to potential FNPP technologies is available from a range of sources which indicate a suite of potential designs that may be used in FNPP systems. The nature of these plants, with respect to operation, life cycle, waste handling

  9. The potential of Biochar technology in combating rocky desertification in the Karst area of south China*

    Science.gov (United States)

    Lee, X.; Xing, Y.; Fang, B.; Zhang, L.; Yang, F.; Zhou, H.

    2012-04-01

    field experiments using the Biochar technology. Here we report the results. As a province with the dominating agriculture, Guizhou produces 10~30 million tons of crop stalks annually, of which roughly 10% were used as fodder of domestic animals or in some other ways while most were subject to the notorious field combustion. The provincial government has issued policies calling for the exploitation of this renewable resource, no breakthrough, however, has been made toward this goal due to the low economic benefit of the current straw use technologies. Should the straws be used in the biochar way, based on our data of field experiments in Guizhou province, the biomass could yield 300~900 thousand tons of charcoal, which would sequester the atmospheric CO2 by 10~30 million tons. Meanwhile the application of the biochar in the basic farmland would enhance the production of corn and rapeseed by about 30%, and the total production of crop by 300 thousand tons. The increased benefit from these two sources is equivalent to a total of 6600 million RMB, or 244 Yuan per capita of farmers per year in the whole province. This income would enable 850 thousand hectares of hill slopes to be relieved from cultivation without impairing the food security. This area accounts for 25% of the total rocky desertification of the province, or 65% of its medium ~severe desertified hillsides. *This research was financially supported by the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDA05070400), the National Natural Science Foundation of China (No. 41021062, 40872212) and the Key Technologies R & D Project in Agriculture of Guizhou Province (No.[2011]3079).

  10. Center for Electronics and Electrical Engineering Technical Bulletin covering center programs

    Science.gov (United States)

    Mayo-Wells, J. F.

    1984-06-01

    A quarterly abstract journal covering the work of the National Bureau of Standards Center for Electronics and Electrical Engineering is presented. The issue covers the third quarter of calendar year 1983. Abstracts are provided by technical area for both published papers and papers approved by NBS for publication. Topics include semiconductor technology, fast signal metrology and electrical power systems metrology.

  11. Manufacturing process applications team (MATEAM). [technology transfer in the areas of machine tools and robots

    Science.gov (United States)

    1979-01-01

    The transfer of NASA technology to the industrial sector is reported. Presentations to the machine tool and robot industries and direct technology transfers of the Adams Manipulator arm, a-c motor control, and the bolt tension monitor are discussed. A listing of proposed RTOP programs with strong potential is included. A detailed description of the rotor technology available to industry is given.

  12. Landfill covers for dry environments

    International Nuclear Information System (INIS)

    Dwyer, S.F.

    1996-01-01

    A large-scale landfill cover field test is currently underway at Sandia National Laboratories in Albuquerque, New Mexico. It is intended to compare and document the performance of alternative landfill cover technologies of various costs and complexities for interim stabilization and/or final closure of landfills in arid and semi-arid environments. Test plots of traditional designs recommended by the US Environmental Protection Agency for both RCRA Subtitle open-quote C close-quote and open-quote D close-quote regulated facilities have been constructed side-by-side with the alternative covers and will serve as baselines for comparison to these alternative covers. The alternative covers were designed specifically for dry environments. The covers will be tested under both ambient and stressed conditions. All covers have been instrumented to measure water balance variables and soil temperature. An on-site weather station records all pertinent climatological data. A key to acceptance of an alternative environmental technology is seeking regulatory acceptance and eventual permitting. The lack of acceptance by regulatory agencies is a significant barrier to development and implementation of innovative cover technologies. Much of the effort on this demonstration has been toward gaining regulatory and public acceptance

  13. Cyanide destruction/immobilization of residual sludge - mixed waste focus area. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    1998-02-01

    Innovative Technology Summary Reports are designed to provide potential users with the information they need to quickly determine if a technology would apply to a particular environmental management problem. They are also designed for readers who may recommend that a technology be considered by prospective users. Each report describes a technology, system, or process that has been developed and tested with funding from DOE's Office of Science and Technology (OST). A report presents the full range of problems that a technology, system, or process will address and its advantages to the DOE cleanup in terms of system performance, cost, and cleanup effectiveness. Most reports include comparisons to baseline technologies as well as other competing technologies. Information about commercial availability and technology readiness for implementation is also included. Innovative Technology Summary Reports are intended to provide summary information. References for more detailed information are provided in an appendix. Efforts have been made to provide key data describing the performance, cost, and regulatory acceptance of the technology. If this information was not available at the time of publication, the omission is noted

  14. Role of BRNS in the DAE's program in the area of nuclear science and technology

    International Nuclear Information System (INIS)

    Markandeya, S.G.

    2008-01-01

    Full text: Soon after the discovery of fission and recognition of its potential for power production, Atomic Research Commission (ARC) was formed under the Chairmanship of Dr. Homi J. Bhabha, which was later renamed, first as Board of Research in Atomic Energy (BRAE) and subsequently as Board of Research in Nuclear Sciences (BRNS) in late fifties under the Department of Atomic Energy (DAE). The BRNS, right from its inception, has been playing an important role of assisting leading universities, academic and R and D institutions in the country for their participation in the departmental program and also in developing skilled human resources in the country for implementing the DAE's programs. Today BRNS has multiple programs which include; sponsored R and D programs in academic and R and D institutes, conducting/supporting international and national conferences, symposia, seminars, workshops in the advanced thematic areas in nuclear science and technology, building Centres of Excellence by way of equipping laboratories with the state-of-the-art experimental facilities and by way of nurturing the local talent. The program has also effective mechanism to strengthen the DAE-university interface through numerous fellowship schemes which cater to students, research scholars and academic staff in the country .The activities of BRNS have been recently further extended to implement the Prospective Research Funding (PRF) scheme under the current Xlth plan project for research scholars from within the department. Possibilities of establishing linkages with the private R and D houses are also being explored. The present talk will give a quick glimpse of the BRNS activities and illustration of some of the important achievements under its programs. The talk is also aimed at further increasing the awareness about the mechanisms and opportunities for participation in the BRNS activities for the scientists and engineers within and outside the department

  15. A study of professional competence for radiological technology department students in Taiwan area

    International Nuclear Information System (INIS)

    Cheng Kai-Yuan; Hsieh Bor-Tsung; Huang W.

    2005-01-01

    Recently, so many medical institutions established and the increasing use of the high technological medical imaging equipment, it makes radiological technology become the main instrument for the medical diagnostic and radiation therapy. However, the medical radiological technologies play the important role to operate all the related radiological machines. If they do not use the machines adequately, it will increase the patients' radiation absorbed dose. Then, the whole society health may be influenced. Therefore, constructing the professional competence of the medical radiological technologists is an important course. The purpose of this research are: (1) to construct the index of professional competence with radiological technology students, (2) to discuss the professional competence for the graduates from the department of radiological technology to be the reference for the Ministry of Examination for the license test of radiological technologists, (3) to provide the direction of the radiological technology department development. (author)

  16. Area-averaged evapotranspiration over a heterogeneous land surface: aggregation of multi-point EC flux measurements with a high-resolution land-cover map and footprint analysis

    Science.gov (United States)

    Xu, Feinan; Wang, Weizhen; Wang, Jiemin; Xu, Ziwei; Qi, Yuan; Wu, Yueru

    2017-08-01

    The determination of area-averaged evapotranspiration (ET) at the satellite pixel scale/model grid scale over a heterogeneous land surface plays a significant role in developing and improving the parameterization schemes of the remote sensing based ET estimation models and general hydro-meteorological models. The Heihe Watershed Allied Telemetry Experimental Research (HiWATER) flux matrix provided a unique opportunity to build an aggregation scheme for area-averaged fluxes. On the basis of the HiWATER flux matrix dataset and high-resolution land-cover map, this study focused on estimating the area-averaged ET over a heterogeneous landscape with footprint analysis and multivariate regression. The procedure is as follows. Firstly, quality control and uncertainty estimation for the data of the flux matrix, including 17 eddy-covariance (EC) sites and four groups of large-aperture scintillometers (LASs), were carefully done. Secondly, the representativeness of each EC site was quantitatively evaluated; footprint analysis was also performed for each LAS path. Thirdly, based on the high-resolution land-cover map derived from aircraft remote sensing, a flux aggregation method was established combining footprint analysis and multiple-linear regression. Then, the area-averaged sensible heat fluxes obtained from the EC flux matrix were validated by the LAS measurements. Finally, the area-averaged ET of the kernel experimental area of HiWATER was estimated. Compared with the formerly used and rather simple approaches, such as the arithmetic average and area-weighted methods, the present scheme is not only with a much better database, but also has a solid grounding in physics and mathematics in the integration of area-averaged fluxes over a heterogeneous surface. Results from this study, both instantaneous and daily ET at the satellite pixel scale, can be used for the validation of relevant remote sensing models and land surface process models. Furthermore, this work will be

  17. Urban Flooding Analysis Using Radar Rainfall Data and 2-D Hydrodynamic Model: A Pilot Study of Back Cover Area, Portland, Maine

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Eugene [Argonne National Lab. (ANL), Argonne, IL (United States); Pierce, Julia [Argonne National Lab. (ANL), Argonne, IL (United States); Mahat, Vinod [Argonne National Lab. (ANL), Argonne, IL (United States); Jared, Alissa [Argonne National Lab. (ANL), Argonne, IL (United States); Collis, Scott [Argonne National Lab. (ANL), Argonne, IL (United States); Verner, Duane [Argonne National Lab. (ANL), Argonne, IL (United States); Wall, Thomas [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-11-01

    This project is a part of the Regional Resiliency Assessment Program, led by the Department of Homeland Security, to address flooding hazards of regional significance for Portland, Maine. The pilot study was performed by Argonne National Laboratory to identify differences in spatial rainfall distributions between the radar-derived and rain-gauge rainfall datasets and to evaluate their impacts on urban flooding. The flooding impact analysis utilized a high-resolution 2-dimensional (2-D) hydrodynamic model (15 ft by 15 ft) incorporating the buildings, streets, stream channels, hydraulic structures, an existing city storm drain system, and assuming a storm surge along the coast coincident with a heavy rainfall event. Two historical storm events from April 16, 2007, and September 29, 2015, were selected for evaluation. The radar-derived rainfall data at a 200-m resolution provide spatially-varied rainfall patterns with a wide range of intensities for each event. The resultant maximum flood depth using data from a single rain gauge within the study area could be off (either under- or over-estimated) by more than 10% in the 2007 storm and more than 60% in the 2015 storm compared to the radar-derived rainfall data. The model results also suggest that the inundation area with a flow depth at or greater than 0.5 ft could reach 11% (2007 storm) and 17% (2015 storm) of the total study area, respectively. The lowland areas within the neighborhoods of North Deering, East Deering, East and West Baysides and northeastern Parkside, appear to be more vulnerable to the flood hazard in both storm events. The high-resolution 2-D hydrodynamic model with high-resolution radar-derived rainfall data provides an excellent tool for detailed urban flood analysis and vulnerability assessment. The model developed in this study could be potentially used to evaluate any proposed mitigation measures and optimize their effects in the future for Portland, ME.

  18. Technology campuses and cities : A study on the relation between innovation and the built environment at the urban area level

    NARCIS (Netherlands)

    Curvelo Magdaniel, F.T.J.

    2016-01-01

    This thesis examines the development of technology campuses and their role in stimulating innovation. The main result of this thesis is a model for understanding and managing the relationship between the built environment and innovation at the urban area level. This model developed mainly throughout

  19. Energy technology in the area of tension between climate policy and liberalisation

    International Nuclear Information System (INIS)

    Van Hilten, O.; Battjes, J.J.; Kaal, M.B.T.; Lako, P.; Nahuis, R.; De Raad, A.; Dijkstra, J.W.; Hemmes, K.

    2000-05-01

    The central question in this report is: how do climate change policies on the one hand and the liberalisation of energy markets on the other hand influence the role of new energy technology? To address this question, technological, economical and societal aspects have been studied. With regard to technological aspects a list is made of technologies which could become important when a 50% reduction of annual Dutch CO 2 emission must be realized in the year 2050. For each of these technologies, future energy efficiencies are estimated. Using these figures, three 'blue prints' of the energy supply system in 2050 are described. In two of these blueprints the energy infrastructure changes drastically, in that electricity or hydrogen becomes the dominant final energy carrier in all end-use sectors. In the third blueprint the current final energy carriers (methane, electricity and gasoline/diesel) maintain their dominant position. With regard to economical aspects, 14 interviews were held with representatives of a wide range of companies in the energy sector, focusing on the role of technology in the company strategy. With regard to societal aspects, a number of important energy technologies are analysed in terms of how much societal support or resistance can be expected when these technologies are implemented on a large scale. Also representatives of two environmental organisations and a consumer organisation were interviewed. 75 refs

  20. Transfer of aerospace technology to selected public sector areas of concern

    Science.gov (United States)

    Berke, J. G.

    1972-01-01

    The activities of the NASA Technology Applications Team at Stanford Research Institute, California are discussed. The specific activities in the fields of criminalistics and transportation are reported. The overall objectives of the program are stated on the basis of successful technology transfer and providing appropriate visibility for program activities.

  1. Everyday life innovation potential: when technology has to make sense. Citizens living in high-risk areas for health, using health-promoting technologies

    DEFF Research Database (Denmark)

    Madsen, Jacob Østergaard

    2014-01-01

    Societal and political focus on both a European and worldwide level calls for a scope on what research have been done within the area of "inequality in health" in order to form both a theoretical and operational foundation for health professionals (in this case occupational therapists) to contrib......Societal and political focus on both a European and worldwide level calls for a scope on what research have been done within the area of "inequality in health" in order to form both a theoretical and operational foundation for health professionals (in this case occupational therapists......) to contribute, along with other health professionals, in dealing with the problem of inequality in health. In this study health promoting technologies for adult citizens living in high risk areas of health, is chosen as one particular area of interest for occupational therapists within the field of health...

  2. Long-term agricultural land-cover change and potential for cropland expansion in the former Virgin Lands area of Kazakhstan

    DEFF Research Database (Denmark)

    Kraemer, Roland; Prishchepov, Alexander; Müller, Daniel

    2015-01-01

    by 2000. After 2000, cropland contraction and re-cultivation were balanced. Using spatial logistic regressions we found that cropland expansion during the Virgin Lands Campaign was significantly associated with favorable agro-environmental conditions. In contrast, cropland expansion after the Campaign...... until 1990, as well as cropland contraction after 1990, occurred mainly in areas that were less favorable for agriculture. Cropland re-cultivation after 2000 was occurring on lands with relatively favorable agro-environmental conditions in comparison to remaining idle croplands, albeit with much lower...

  3. Discussion on Sustainable Water Technologies for Peri-Urban Areas of Mexico City: Balancing Urbanization and Environmental Conservation

    Directory of Open Access Journals (Sweden)

    Tiemen A. Nanninga

    2012-09-01

    Full Text Available Often centralized water supply, sanitation and solid waste services struggle to keep up with the rapid expansion of urban areas. The peri-urban areas are at the forefront of this expansion and it is here where decentralized technologies are increasingly being implemented. The introduction of decentralized technologies allows for the development of new opportunities that enable the recovery and reuse of resources in the form of water, nutrients and energy. This resource-oriented management of water, nutrients and energy requires a sustainable system aimed at low resource use and high recovery and reuse rates. Instead of investigating each sector separately, as has been traditionally done, this article proposes and discusses a concept that seeks to combine the in- and outflows of the different sectors, reusing water and other liberated resources where possible. This paper shows and demonstrates examples of different types of sustainable technologies that can be implemented in the peri-urban areas of Mexico City [rainwater harvesting, EcoSan and biofiltros (small constructed wetlands, and (vermi-composting]. An innovative participatory planning method, combining scenario development with a participatory planning workshop with key stakeholders, was applied and resulted in three concept scenarios. Specific technologies were then selected for each concept scenario that the technical feasibility and applicability was assessed. Following this, the resulting resource flows (nutrients, water and energy were determined and analyzed. The results show that decentralized technologies not only have the potential to deliver adequate water supply, sanitation and solid waste services in peri-urban areas and lessen environmental pollution, but also can recover significant amounts of resources thereby saving costs and providing valuable inputs in, for instance, the agricultural sector. Social acceptance of the technologies and institutional cooperation

  4. Discussion on Sustainable Water Technologies for Peri-Urban Areas of Mexico City: Balancing Urbanization and Environmental Conservation

    Directory of Open Access Journals (Sweden)

    Laura Essl

    2012-09-01

    Full Text Available Often centralized water supply, sanitation and solid waste services struggle to keep up with the rapid expansion of urban areas. The peri-urban areas are at the forefront of this expansion and it is here where decentralized technologies are increasingly being implemented. The introduction of decentralized technologies allows for the development of new opportunities that enable the recovery and reuse of resources in the form of water, nutrients and energy. This resource-oriented management of water, nutrients and energy requires a sustainable system aimed at low resource use and high recovery and reuse rates. Instead of investigating each sector separately, as has been traditionally done, this article proposes and discusses a concept that seeks to combine the in- and outflows of the different sectors, reusing water and other liberated resources where possible. This paper shows and demonstrates examples of different types of sustainable technologies that can be implemented in the peri-urban areas of Mexico City [rainwater harvesting, EcoSan and biofiltros (small constructed wetlands, and (vermi-composting]. An innovative participatory planning method, combining scenario development with a participatory planning workshop with key stakeholders, was applied and resulted in three concept scenarios. Specific technologies were then selected for each concept scenario that the technical feasibility and applicability was assessed. Following this, the resulting resource flows (nutrients, water and energy were determined and analyzed. The results show that decentralized technologies not only have the potential to deliver adequate water supply, sanitation and solid waste services in peri-urban areas and lessen environmental pollution, but also can recover significant amounts of resources thereby saving costs and providing valuable inputs in, for instance, the agricultural sector. Social acceptance of the technologies and institutional cooperation, however, is

  5. MULTITEMPORAL ANALYSIS OF LAND COVERING AND VEGETATION AREAS UNDER QUATERNARY SUPERFICIAL FORMATION – A STUDY OF THE HYDROGRAPHIC BASIN STREAM PUITÃ, RIO GRANDE DO SUL – BRAZIL

    Directory of Open Access Journals (Sweden)

    Rafael Lacerda Martins

    2005-05-01

    Full Text Available The hydrographic basin of stream Puitã, located in the southwest of the state of Rio Grande do Sul – Brazil, is characterized by quaternary superficial formation. These formations are dominated by erosive features and sand strands located in the geological compartment of hills as well by bushes located on the hillside and ciliary’s bushes located along the course of the water together with the campestre vegetation. The use of the land stands out with plots of land used to agriculture, intensified in the last decades. Theagricultural activities left the soil fragile, causing erosive features. This study aims to identify the existent relationship between the type of vegetation and the soil degradation in the regionof the hydrographic basin. The methodology is based on digital classification of Landsat-TM satellite images, data acquired between 1984 e 2004, on the correlation analysis between degraded areas, classes of land use and vegetation’s types.The results showed thematic maps that allowed identifying the different fragilities and susceptible areas to the sandification process. The multitemporal approach allowed to evaluate the modifications of the mapping classes and to identify the expansion or retracting of sand strands and erosive processes. It was detected that the agricultural use is the responsible agent for the amplification of the soil fragility.

  6. RES COVER FEB 08

    Indian Academy of Sciences (India)

    THOLASI

    Technology, Kanpur. His area of research is in the field of electronic structure of matter and he has contributed significantly to fundamental aspects of density functional theory ... led him to introduce the revolutionary concept of the quantum of energy ... alization of the concept of quanta by E instein to propose quantization of ...

  7. Special Technology Area Review on Field Programmable Gate Arrays (FPGAs) For Military Applications

    National Research Council Canada - National Science Library

    2005-01-01

    ...) on Field Programmable Gate Arrays (FPGAs) for Military Applications on August 3-4, 2004 at the Naval Postgraduate School in Monterey, California to address issues relevant to the use of this technology in military systems...

  8. Scenarios to explore the futures of the emerging technology of organic and large area electronics

    NARCIS (Netherlands)

    Parandian, Alireza; Rip, Arie

    2013-01-01

    Emerging technologies pose challenges for futures research because of their uncertainties combined with promises. Actors are anticipating and acting strategically. Sociotechnical scenarios building on endogenous futures support and enlighten actors. Such scenarios contribute to “strategic

  9. Analysis of small business participation in the photovoltaic area of solar technology

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    The level of participation of small businesses in photovoltaic technology was ascertained and recommendations were made relative to improving the level of participation. Hypothetical examples were developed of small businesses in the various stages of entry into or participating in photovoltaic activities and an analysis was made of the methods which could be used by the Division of Solar Technology (DSI) to encourage and strengthen the participation by small business in the photovoltaic activities of DST. (MHR)

  10. Canada's clean energy technology and the Bay area market : a needs assessment

    International Nuclear Information System (INIS)

    2008-03-01

    This study was conducted to develop market intelligence related to clean energy technologies in Northern California, including both commercial and demonstration technologies. The study was developed as a tool for exploring engagement between Canadian and Californian businesses and partnering opportunities. The study examined technologies for solar power and photovoltaics; hydrogen and fuel cells; and waste-to-energy. A list of more than 150 organizations, government agencies, business associations, and utilities was prepared. The survey also included the establishment of contact points with large facilities, public spaces, bus fleets, and major capital projects. Fifty-nine interviews were also conducted as part of the study. Results of the study indicated that the biggest challenge concerning most individuals was the need to reduce energy consumption while maintaining reliability. Many interviewees expressed an interest in operating waste-to-energy facilities. Fifty interviewees indicated that they were planning to use or already used solar technologies. An analysis of clean energy needs was also included. The study indicated that many local governments are reluctant to embrace new, highly visible technologies. Only sophisticated organizations with unique energy demands have considered the use of fuel cell technologies. 1 fig

  11. Analysis of the ecological environment change by geoinformatics technology at special erosion area in Taiwan

    Science.gov (United States)

    Chang, Chun-Pin; Tsai, Shang-Te; Wu, Zhi-Feng; Liang, Ta-Ching

    2008-10-01

    Due to the poor condition of soil and micro-climate condition, the mudstone area in the southwestern Taiwan has been difficult for plants to grow. The area is always in such a bare condition that it is nicknamed "Moon World." Serious erosion and natural disasters in the mudstone area are the significant problems for soil and water conservation, and the area of bald mudstones is expanding. Statistical data show that bare area has increased 3 times during the past 10 years. The mudstone area in the southwestern Taiwan was hard to plant and then it always in bare condition which got a nickname of The Moon World. The distribution of each land-use type in mudstone area, and spatial information in years were integrated into GIS by ArcView. In the respect of ecosystem, ecological index in different periods were calculated based upon landscape ecological theory. To explain its meanings and the danger behind the bare mudstone area, the results indicated that mosaic gathering was caused by mudstone and thorn bamboo. The results illustrated that the ecological factor of landscape such as patch shape factor, and Shannon evenness factor that have significant canonical correlation with water qualities and erosion of the study area. In study area, there are many styles of fracture, variation, and mosaic distribution landscape.

  12. Inequalities in access and utilization of dental services: a cross-sectional study in an area covered by the Family Health Strategy

    Directory of Open Access Journals (Sweden)

    Márcia Helena Baldani

    2011-01-01

    Full Text Available This cross-sectional study aimed to investigate the presence of inequalities in the access and use of dental services for people living in the coverage area of the Family Health Strategy (FHS in Ponta Grossa, Paraná State, Brazil, and to assess individual determinants related to them. The sample consisted of 747 individuals who answered a pre-tested questionnaire. Data analysis was performed by chi-square test and Poisson regression analysis, obtaining explanatory models for recent use and, by limiting the analysis to those who sought dental care, for effective access. Results showed that 41% of the sample had recent dental visits. The lowest visit rates were observed among preschoolers and elderly people. The subjects who most identified the FHS as a regular source of dental care were children. Besides age, better socioeconomic conditions and the presence of a regular source of dental care were positively associated to recent dental visits. We identified inequalities in use and access to dental care, reinforcing the need to promote incentives to improve access for underserved populations.

  13. One-Dimensional Convolutional Neural Network Land-Cover Classification of Multi-Seasonal Hyperspectral Imagery in the San Francisco Bay Area, California

    Directory of Open Access Journals (Sweden)

    Daniel Guidici

    2017-06-01

    Full Text Available In this study, a 1-D Convolutional Neural Network (CNN architecture was developed, trained and utilized to classify single (summer and three seasons (spring, summer, fall of hyperspectral imagery over the San Francisco Bay Area, California for the year 2015. For comparison, the Random Forests (RF and Support Vector Machine (SVM classifiers were trained and tested with the same data. In order to support space-based hyperspectral applications, all analyses were performed with simulated Hyperspectral Infrared Imager (HyspIRI imagery. Three-season data improved classifier overall accuracy by 2.0% (SVM, 1.9% (CNN to 3.5% (RF over single-season data. The three-season CNN provided an overall classification accuracy of 89.9%, which was comparable to overall accuracy of 89.5% for SVM. Both three-season CNN and SVM outperformed RF by over 7% overall accuracy. Analysis and visualization of the inner products for the CNN provided insight to distinctive features within the spectral-temporal domain. A method for CNN kernel tuning was presented to assess the importance of learned features. We concluded that CNN is a promising candidate for hyperspectral remote sensing applications because of the high classification accuracy and interpretability of its inner products.

  14. Technology Museums in Denmark

    DEFF Research Database (Denmark)

    Søndergaard, Morten Karnøe

    2012-01-01

    within wind power technology. Finally special attention is devoted to the Danish Technological Museum. A museum which is the oldest and most elaborate of all the technology museums. The museum covers virtually every technological breakthrough with any relevance in a Danish section, with a special focus......This article presents an exhibit review of some of the major technology museums in Denmark. First comes an introduction to the Danish museum ”landscape”. Second a total of six museums and their technology focused exhibits are presented. Among the museums are the Fisheries and Maritime Museum...... in Esbjerg, housing one of the most impressive and representative exhibitions on the technology behind the strong Danish maritime sector. Another museum being mentioned is the Energy Museum, which covers the background for some of the major breakthroughs performed in Denmark within this area; particularly...

  15. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

  16. Land Cover - Minnesota Land Cover Classification System

    Data.gov (United States)

    Minnesota Department of Natural Resources — Land cover data set based on the Minnesota Land Cover Classification System (MLCCS) coding scheme. This data was produced using a combination of aerial photograph...

  17. Hydrogen storage for vehicular applications: Technology status and key development areas

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, S.L.; Handrock, J.L.

    1994-04-01

    The state-of-the-art of hydrogen storage technology is reviewed, including gaseous, liquid, hydride, surface adsorbed media, glass microsphere, chemical reaction, and liquid chemical technologies. The review of each technology includes a discussion of advantages, disadvantages, likelihood of success, and key research and development activities. A preferred technological path for the development of effective near-term hydrogen storage includes both cur-rent DOT qualified and advanced compressed storage for down-sized highly efficient but moderate range vehicles, and liquid storage for fleet vehicle applications. Adsorbate media are also suitable for fleet applications but not for intermittent uses. Volume-optimized transition metal hydride beds are also viable for short range applications. Long-term development of coated nanoparticulate or metal matrix high conductivity magnesium alloy, is recommended. In addition, a room temperature adsorbate medium should be developed to avoid cryogenic storage requirements. Chemical storage and oxidative schemes present serious obstacles which must be addressed for these technologies to have a future role.

  18. Adding faculty in transportation areas : research progress on geomaterials and non-destructive sensor technology.

    Science.gov (United States)

    2014-08-01

    This funding was provided to help departments build up their faculty in the transportation field over the next years. Broad areas will : be considered as listed in the UTC mission or other areas that relate to State Departments of Transportation and ...

  19. Proposal for the decision making in sensitive technology: application to the nuclear area

    International Nuclear Information System (INIS)

    Silva, Eduardo Ramos Ferreira da

    2007-01-01

    In a previous article, a correlation is made among the phases of the nuclear technology development and the decision making processes, showing that from the 70's decade, such processes are connected to the national security doctrines, influenced by the Brazilian War College. In this paper it is shown the developed model for the decision making when the sensitive technologies are involved that in our special case will be specific oriented to the nuclear technology. An assessment are made for such decisions must having the the population approval, showing the main existent obstacles and how the present model, although defined at the end of the year 2003, will not be succeeded in a short period of time. It is mainly shown that the linear models must be abandoned, essential since the Word War II, for a holistic model more realistic with a new global state of affairs

  20. Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications

    CERN Document Server

    International Organization for Standardization. Geneva

    1997-01-01

    Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications

  1. Singular technology – the research area promoting sustainable noosphere d evelopment in Belarus, Russia and other CIS nations

    Directory of Open Access Journals (Sweden)

    Petr Georgievich Nikitenko

    2014-05-01

    Full Text Available The article is devoted to nano- and femtotechnology as the basis for sustainable noosphere development of the global socio-economic mega system “nature–man–society” in its relation with the Universe (cosmos in Belarus, Kazakhstan, Russia, Ukraine and other CIS nations. Such factors as the formation of a new (noospheric political and economic outlook and the changes in scientific and technological structure of economy are gaining paramount importance under the action of the law of time and the adequate need to change the logic of socio-economic behavior of the population of planet Earth. Singular technology can become a strategic priority in finding practical solutions to these issues. When creating new productive forces and relations of production, these technologies act as a synergetic and bifurcation (unpredictable interaction of the three system technologies: artificial intelligence, molecular nanotechnology and molecular biotechnology. As soon as man grasps the essence of singular technology, it will be possible to create a new structure of matter at the nano- and femtotechnology levels, and to exercise control over this process. The new structure of matter is the basis for the creation of new productive forces and relations of production in the noosphere economy. Technological singularity originated in the mapping of the human genome, creation of a self-replicating organism, and a self-replicating machine. The nearest strategic objective (2020–2030s of singular technology is to create an artificial brain – a “digital man” on the basis of nano-and femtotechnology. This research area and practice will open the way to new forms of energy, productive forces, industrial relations and socio-economic noosphere systems in general. The wide application of singular technology in the economy will contribute to the conservation and civilizational development of the planetary megasystem “cosmos–nature–man–society”

  2. Space transportation propulsion USSR launcher technology, 1990

    Science.gov (United States)

    1991-01-01

    Space transportation propulsion U.S.S.R. launcher technology is discussed. The following subject areas are covered: Energia background (launch vehicle summary, Soviet launcher family) and Energia propulsion characteristics (booster propulsion, core propulsion, and growth capability).

  3. Technological civilization impact on the environment. Situation in the post-Soviet area. Abstracts

    International Nuclear Information System (INIS)

    Gabowitsch, E.; Granberg, I.; Hefter, E.

    1996-01-01

    The book of abstracts contains 123 abstracts on the following main topic: East-West cooperation in the field of assessment of the technological civilization impact on the environment and man, industrial, agricultural, traffic, military and urban pollution and contamination by nuclear power utilization. (HP)

  4. Information Technology Applications on Human Resources Management Functions in Large U.S. Metropolitan Areas

    Science.gov (United States)

    Alsawafy, Qais Abdulkadum Kahalf

    2013-01-01

    The existing bond between human resources (HR) that team up in a business enterprise and the "real medium" information technology (IT) itself appears in the moment that the relationship is generated independently of the kind of enterprise and the relationship established between them. In today's competitive business world, companies who…

  5. Integration of educational and scientific-technological areas during the process of education of aerospace engineers

    Science.gov (United States)

    Mayorova, Vera

    2011-09-01

    National priorities, defined by modern state of high-tech industries, demand adequate problem solving of training professionals possessing required modern qualifications. Modern tendencies of the development of aerospace technologies, harsh competition in the market of space services and expansion of international cooperation for implementation of space projects, demand sharp increase of the scientific/technical level and competitiveness of the developed projects. Especially important is to be able to solve technological problems, which in turn define the cost and quality attributes of the designed item, as well as the ability to utilize the most modern design principles. Training of highly efficient, creative professionals who are capable of generating and implementing new ideas is a very important factor driving not only the development of national economy and industry, but also enriching the human capital of the country. Moscow State Technical University named after N.E. Bauman developed and successfully implemented the project-oriented technology of professional training for aerospace industry. It assumes a multitude of forms, methodologies and organizational events, which allow preparing the specialists - on the basis of integration of scientific/technological and educational environment - who are adapted to the conditions of the intellectual market. The Youth Space Center of the University is the base where graduate and post-graduate students attend unique lectures as a part of the facultative course "Applied Cosmonautics", participate in annual International Youth Science School "Space Development: Theory and Practice" and develop innovative technical projects aimed at creation of real-life space hardware. Microsatellite technologies are being developed in Bauman University through various projects, which are implemented in a coordinated manner by way of accomplishing the following steps: development of small-size satellites by universities, using them as

  6. Foreknowledge of breakthroughs science and technology foresight, and the early identification of areas of breakthrough

    International Nuclear Information System (INIS)

    Papon, P.

    2010-01-01

    The progress of science and technology has been so rapid in the last few decades that it receives especial attention in forecasting and foresight exercises. But, because they are too greatly in thrall to the dominant paradigms and hence favour a linear perspective, the experts who deal with these questions pay more attention to the future of technologies than to scientific advances and revolutions. The bulk of their work consists, then, in anticipating, by various different methods (Delphi surveys, Road-maps, etc.), at what date a particular technology might be available (without, however, always correctly gauging the conditions for its social appropriation or the applications to which it might be put). In this article, Pierre Papon expounds a much more original and promising approach for attempting to anticipate the discoveries that are likely radically to transform the fields of scientific knowledge by investigating the phenomena that may potentially lead to fundamental revolutions. After reminding us of the premonitory thinking of a number of authors - in the fields, for example, of genetics and computer science -, he endeavors to describe some of the dominant paradigms, particularly in quantum physics and molecular biology. In this way, he shows the advances they have made possible, and also their limitations, and explores what new scientific leaps forward might occur, bringing radically new technological breakthroughs between now and 2050. Papon reminds us, at the same time that, 'as science is not something isolated within society'; it has a duty to contribute to meeting the great challenges that face us - of work, health, nutrition and sustainable development, particularly where energy and climate are concerned. He therefore examines the ways in which future scientific and technological advances might provide solutions and how important it might be to 'translate the questions society poses into scientific questions'. He thus argues implicitly for strategic

  7. Key seismic exploration technology for the Longwangmiao Fm gas reservoir in Gaoshiti–Moxi area, Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Guangrong Zhang

    2016-10-01

    Full Text Available The dolomite reservoirs of the Lower Cambrian Longwangmiao Fm in the Gaoshiti–Moxi area, Sichuan Basin, are deeply buried (generally 4400–4900 m, with high heterogeneity, making reservoir prediction difficult. In this regard, key seismic exploration technologies were developed through researches. Firstly, through in-depth analysis on the existing geologic, drilling, seismic data and available research findings, basic surface and subsurface structures and geologic conditions within the study area were clarified. Secondly, digital seismic data acquisition technologies with wide azimuth, wide frequency band and minor bins were adopted to ensure even distribution of coverage of target formations through optimization of the 3D seismic geometry. In this way, high-accuracy 3D seismic data can be acquired through shallow, middle and deep formations. Thirdly, well-control seismic data processing technologies were applied to enhance the signal-to-noise ratio (SNR of seismic data for deep formations. Fourthly, a seismic response model was established specifically for the Longwangmiao Fm reservoir. Quantitative prediction of the reservoir was performed through pre-stack geo-statistics. In this way, plan distribution of reservoir thicknesses was mapped. Fifthly, core tests and logging data analysis were conducted to determine gas-sensitive elastic parameters, which were then used in pre-stack hydrocarbon detection to eliminate the multiple solutions in seismic data interpretation. It is concluded that application of the above-mentioned key technologies effectively promote the discovery of largescale marine carbonate gas reservoirs of the Longwangmiao Fm.

  8. Engineering with nuclear explosives near populated areas - A survey from the technological and economic viewpoint

    International Nuclear Information System (INIS)

    Parker, K.

    1970-01-01

    Current experience with underground firings of nuclear explosives and of large charges of conventional explosives is largely confined to sparsely populated areas such as the Nevada and Sahara deserts and parts of Siberia. On the other hand many of the commercial applications proposed for nuclear explosives are directly relevant to industrialized areas, where consumptions of energy and natural resources are high, as are population densities. In many of these areas there is a need to increase the efficiency with which natural gas, oil and electrical power are supplied and to make safe disposal of fluid wastes; completely contained nuclear explosions could be a useful tool in achieving some or all of these aims. Whilst radioactivity and air blast hazards are likely to rule out nuclear cratering operations near densely populated areas, the prospects for carrying out completely contained explosions are much better, providing seismic damage is kept within reasonable bounds. In large areas of Western Europe and on the eastern, southern and western seaboards of the United States this might be achieved by using nuclear explosions beneath the seabed at a reasonable distance from the nearest coastline, always provided the relevant political issues can be resolved. Stimulation and storage of North Sea natural gas, construction of off-shore oil storage and storage of electrical energy are areas where engineering with nuclear explosives merits more detailed investigation and some of the relevant technical problems are discussed. (author)

  9. Next generation of global land cover characterization, mapping, and monitoring

    Science.gov (United States)

    Giri, C.; Pengra, B.; Long, J.; Loveland, T. R.

    2013-12-01

    Land cover change is increasingly affecting the biophysics, biogeochemistry, and biogeography of the Earth's surface and the atmosphere, with far-reaching consequences to human well-being. However, our scientific understanding of the distribution and dynamics of land cover and land cover change (LCLCC) is limited. Previous global land cover assessments performed using coarse spatial resolution (300 m-1 km) satellite data did not provide enough thematic detail or change information for global change studies and for resource management. High resolution (˜30 m) land cover characterization and monitoring is needed that permits detection of land change at the scale of most human activity and offers the increased flexibility of environmental model parameterization needed for global change studies. However, there are a number of challenges to overcome before producing such data sets including unavailability of consistent global coverage of satellite data, sheer volume of data, unavailability of timely and accurate training and validation data, difficulties in preparing image mosaics, and high performance computing requirements. Integration of remote sensing and information technology is needed for process automation and high-performance computing needs. Recent developments in these areas have created an opportunity for operational high resolution land cover mapping, and monitoring of the world. Here, we report and discuss these advancements and opportunities in producing the next generations of global land cover characterization, mapping, and monitoring at 30-m spatial resolution primarily in the context of United States, Group on Earth Observations Global 30 m land cover initiative (UGLC).

  10. Development of practical application technology for photovoltaic power generation systems in fiscal 1997. Development of technologies to manufacture next-generation thin film solar cells, development of technologies to manufacture CIS solar cell modules, development of technologies to increase high-quality film area; 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Jisedai usumaku taiyo denchi module no seizo gijutsu kaihatsu, CIS taiyo denchi module no seizo gijutsu kaihatsu, kohinshitsumaku no daimensekika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    With an objective to improve efficiency and reduce cost of CIS-based thin film solar cells, research and development has been made on technologies to increase high-quality CIS film area and technologies to increase speed in the manufacturing process. This paper describes the achievements attained during fiscal 1997. The research covered development of technologies to form high-grade Cu (In, Ga) Se{sub 2} (CIGS) film by using the multi-dimensional deposition process, component technologies for forming a rear electrode, a buffer layer and a transparent electrode, and patterning technologies. As a result of the research, thickness of the CIGS film was reduced to half as much as that of the conventional films, having achieved conversion efficiency of 13.1%, which corresponds to about 90% of the conventional CIGS solar cells. In addition, elucidation was made on the effect of an MoSe{sub 2} layer existing on interface with CIGS/Mo in a CIGS solar cell imposed on solar cell characteristics. In developing an Mo film laser scribing technology, intensity dependence of laser energy was made clear, the energy being required for scribing according to surface condition of the Mo film. (NEDO)

  11. Uso do solo e cobertura vegetal na área de influência do AHE CAPIM BRANCO I / Land use and vegetal cover in the Area Influence of AHE Capim Branco I

    Directory of Open Access Journals (Sweden)

    Jorge Luis Silva Brito

    2006-06-01

    Full Text Available The present work has as objective to identify, to delimit, to map and to evaluate the differentcategories of land use and vegetal cover gifts in the area of influence of hidroeletric exploitation(AHE Capim Branco I, using techniques of remote remote sensing and geoprocessing. Thisenterprise best situated enters geographic coordinates of 18º 43' - 18º 59' of south latitude and 47º57' - 48º 13' of longitude west of the meridian of Greenwich. The total area of mapping understands455,20 km2, enclosing part of the cities of Uberlândia, Araguari and Indianópolis. The work was developed by means of the following stages: acquisition of the images CCD/CBERS, processing ofthe same ones by means of the SPRING, for the rectification, distinction, colored composition,elaboration of the letter image and visual interpretation in “screen”. The cartographic base waselaborated from topographical maps scales 1:25.000 and converted for the digital way with theCARTALINX. The presentation of the final map was made with the ARCVIEW. The categories ofLand Use and Vegetal Cover, gifts in the study area and that they had been survey are: mata/cerradão, open pasture, closed field, vegetation in regeneration, pasture, annual culture, perennialculture, hortifruticulturas, bodies d ‘ water, reforestation, urban areas and of mixing use, seedbedof workmanships and deforested area. From the mapping, it was verified that the pasture was thecategory of bigger areal expression, occupying 48.7% of the area, followed of forest, with 19,2%,annual culture with 17,9%, vegetation in regeneration with 3,4% and perennial culture with3,3%. The too much uses appear with well lesser percentages, being able itself still to detach,urban areas and of mixing use with 2,4% and vegetables with 2,0%. To conclude, we can verify,that the adopted procedures, as well as the used materials, especially images CCD/CBERS, hadrevealed satisfactory for the development of the work.

  12. Innovative GIS and Information Technologies Supporting Wide Area Assessment of UXO Sites

    Science.gov (United States)

    2008-10-01

    documentation, project status information and contacts. Access to the ESRI ArcGIS® client software and licenses through the Citrix MetaFrame...ArcGIS environment. They were available using the ArcMap desktop client either locally or remotely by using the Citrix ArcGIS Desktop Server. Saved...Technologies for WAA Final Report October 2008 -7- available via Citrix Presentation Server, which provided users

  13. Healthcare Information Technology (HIT) in an Anti-Access (A2) and Area Denial (AD) Environment

    Science.gov (United States)

    2014-03-01

    emerging trends in the near to midterm are numerous and the technology platforms exist today. Mobile platforms, radio frequency identification ( RFID ...30 Apple, “Apple Reinvents the Phone with iPhone,” 9 January 2007, http://www.apple.com/pr/ library /2007/01/09Apple...Reinvents-the-Phone-with-iPhone.html (accessed 27 January 2014). 31 Apple, “Apple Launches iPad,” 27 January 2010, http://www.apple.com/pr/ library

  14. Cover Your Cough

    Science.gov (United States)

    ... Seasonal Avian Swine Variant Pandemic Other Cover Your Cough Language: English (US) Español Recommend on Facebook Tweet ... eat nutritious food. Printable formats of “Cover Your Cough” Posters only available as PDF files. Cover Your ...

  15. 40 CFR 80.70 - Covered areas.

    Science.gov (United States)

    2010-07-01

    ... the county line to the intersection of county road 567 and the Jefferson-Bullitt County Line; (B) Proceeding south on county road 567 to the junction with Ky 1116 (also known as Zoneton Road); (C) Proceeding... limits to the Salt River and west to a point across the river from Mooney Lane; (H) Proceeding south...

  16. Advanced laptop and small personal computer technology

    Science.gov (United States)

    Johnson, Roger L.

    1991-01-01

    Advanced laptop and small personal computer technology is presented in the form of the viewgraphs. The following areas of hand carried computers and mobile workstation technology are covered: background, applications, high end products, technology trends, requirements for the Control Center application, and recommendations for the future.

  17. Multicriteria focus to evaluate the operation of technologies of renewable energy in rural areas

    International Nuclear Information System (INIS)

    Cherni, Judith A

    2003-01-01

    This paper evaluates the problem of the selection of renewable energy alternatives in rural regions in the developing world. We discuss a multicriteria method, MAP RESURL, for assessing the effectiveness and sustainability of the energy systems that have been installed in rural areas. The purpose is to improve the effectiveness of energization policies

  18. Multicriteria method to evaluate the operation of technologies of renewable energy in rural areas

    International Nuclear Information System (INIS)

    Cherni, Judilh

    2003-01-01

    This paper evaluates the problem of the selection of renewable energy alternatives in rural regions in the developing world. We discuss a multicriteria method, map result, for assessing the effectiveness and sustainability of the energy systems that have been installed in rural areas. The purpose is to improve the effectiveness of energization policies

  19. Single-grain Silicon Technology for Large Area X-ray Imaging

    NARCIS (Netherlands)

    Arslan, A.

    2015-01-01

    Digital flat panel X-ray imagers are currently using a-Si and poly-Si thin-film-transistors (TFTs). a-Si TFT permits the use of large area substrates, however, due to the amorphous nature, the carrier mobility is very low (<1 cm2/Vs). Poly-Si TFT improves the mobility (~150 cm2/Vs) but due to random

  20. Evolution of Ada technology in the flight dynamics area: Implementation/testing phase analysis

    Science.gov (United States)

    Quimby, Kelvin L.; Esker, Linda; Miller, John; Smith, Laurie; Stark, Mike; Mcgarry, Frank

    1989-01-01

    An analysis is presented of the software engineering issues related to the use of Ada for the implementation and system testing phases of four Ada projects developed in the flight dynamics area. These projects reflect an evolving understanding of more effective use of Ada features. In addition, the testing methodology used on these projects has changed substantially from that used on previous FORTRAN projects.

  1. Matching study areas using Google Street View: A new application for an emerging technology.

    Science.gov (United States)

    Less, Elyse Levine; McKee, Patricia; Toomey, Traci; Nelson, Toben; Erickson, Darin; Xiong, Serena; Jones-Webb, Rhonda

    2015-12-01

    Google Street View (GSV) can be used as an effective tool to conduct virtual neighborhood audits. We expand on this research by exploring the utility of a GSV-based neighborhood audit to measure and match target and comparison study areas. We developed a GSV-based inventory to measure characteristics of retail alcohol stores and their surrounding neighborhoods. We assessed its reliability and assessed the utility of GSV-based audits for matching target and comparison study areas. We found that GSV-based neighborhood audits can be a useful, reliable, and cost-effective tool for matching target and comparison study areas when archival data are insufficient and primary data collection is prohibitive. We suggest that researchers focus on characteristics that are easily visible on GSV and are relatively stable over time when creating future GSV-based measuring and matching tools. Dividing the study area into small segments may also provide more accurate measurements and more precise matching. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Addressing service delivery in rural areas through deployment of information and communication technology platforms

    CSIR Research Space (South Africa)

    Foko, Thato E

    2017-05-01

    Full Text Available ICTs have power to connect or provide access to poor people in remote rural villages. The initiatives to deploy ICTs in rural areas have mostly not been sustainable. The purpose of the paper is to ascertain what factors lead to the unsuccessful...

  3. From BAN to AmI-BAN : micro and nano technologies in future Body Area Networks

    NARCIS (Netherlands)

    Jones, Val

    2006-01-01

    At the University of Twente we have been researching mobile healthcare applications since 1999. Since 2002 the University of Twente and partners have been developing health Body Area Networks (BANs) and a BAN service platform. We define a BAN as a network of communicating devices worn on, around or

  4. From BAN to AmI-BAN: micro and nano technologies in future Body Area Networks

    NARCIS (Netherlands)

    Jones, Val; Jones, Val

    2006-01-01

    At the University of Twente we have been researching mobile healthcare applications since 1999. Since 2002 the University of Twente and partners have been developing health Body Area Networks (BANs) and a BAN service platform. We define a BAN as a network of communicating devices worn on, around or

  5. Technology campuses and cities: A study on the relation between innovation and the built environment at the urban area level

    Directory of Open Access Journals (Sweden)

    Flavia Teresa de Jesús Curvelo Magdaniel

    2016-08-01

    Full Text Available This thesis examines the development of technology campuses as built environments and their role  in stimulating innovation. Technology campuses entail a variety of built environments developed to accommodate technology-driven research activities of multiple organisations. The science park is the most common type of technology campus. Other types include the campuses of universities  of technology and corporate R&D parks. In industrialised countries, the demand for developing  technology  campuses  to  stimulate innovation has been growing in line with the attention given to knowledge in global, national and regional policies. There are over 700 technology campuses worldwide occupying hundred thousands  of hectares in- and around cities. This type of built environments have emerged and developed during critical periods of technological advancements throughout the 20th century, to support technology-based development in industrialised countries. With the adoption of the knowledge- based economy, governments in many countries have encouraged research as an essential activity in their science, technology and innovation policies. The infrastructure that supports research is also gaining momentum. The number of registered science parks is steadily increasing since the late 1990s. The number of programmes supporting research infrastructure is growing in the European policy agenda. Municipalities are formally engaged with other public and private parties in the development of urban areas targeted to stimulate innovation. Governments, universities and R&D companies are investing billions of euros in developing the infrastructure that will not only support their core processes, but will help them to remain competitive by attracting and retaining the best talent. Part of these investments are targeted to develop new buildings or entire areas that often result in campuses as we know them: a concentration of buildings accommodating organisations

  6. Management of a science and technology popularization project in the nuclear area

    International Nuclear Information System (INIS)

    Soares, Wellington Antonio; Maretti Junior, Fausto

    2007-01-01

    The goal of this paper is to show the management results of the 2005-2007 project 'Nuclear energy: itinerant expositions' sponsored by the Foundation for Research Support of Minas Gerais (FAPEMIG), a state agency, in a science and technology popularization program. The project coordinated by the Nuclear Technology Development Center (CDTN/CNEN) in partnership with the Minas Commerce Association (ACMinas) was designed to students from public high school of the Belo Horizonte metropolitan region. It consisted of an exposition and a previous talk motivating the audience to the nuclear technology in connection with subjects taught at schools, like physics, chemistry, biology, mathematics, history, etc. Small scale models of nuclear and radioactive installations, irradiated food and fruits samples and colored gems by gamma rays were presented at the stand exposition. Designing, performing and evaluating the project required the following activities: searching of information on the target public, infrastructure mounting, team training, multimedia material elaboration, strategy for dealing with the students, talk presentation, distribution of booklet on nuclear themes, reception at the exposition, interviews with students and teachers by journalists, evaluation of the project by the schools, evaluation of the project by some students three months after the event and also reporting the project to the media. About forty people of CDTN took part in the project that reached thirty high schools and encompassed about 11,000 students. About five hundred state high school teachers of chemistry, physics and biology were reached by the experience of the project in a specialization course given by a local university. Only high approval was received by the project in the returned questionnaires. (author)

  7. Virtual Reality Technologies and the Creative Arts in the Areas of Disability, Therapy, Health, and Rehabilitation

    OpenAIRE

    Cobb, S. V. G.; Brooks, Anthony Lewis; Sharkey, P. M.

    2013-01-01

    A key theme in the ArtAbilitation conferences is the relationship between 6 sound, movement, and art, and how these can be used for rehabilitation and/or 7 expression by individuals who may have limited access to conventional communi- 8 cation. The development of VR environments and interactive technology has led to 9 a variety of applications that might broadly be considered as telerehabilitation, 10 including the use of 3D space and interactive feedback for remote assistance of 11 users in ...

  8. Public policy performance for social development: solar energy approach to assess technological outcome in Mexico City Metropolitan Area.

    Science.gov (United States)

    Arenas-Aquino, Angel Raúl; Matsumoto-Kuwabara, Y; Kleiche-Dray, M

    2017-11-01

    Mexico City Metropolitan Area (MCMA) is the most populated urban area in the country. In 2010, MCMA required 14.8% of total energy domestic demand, but greenhouse gas emissions accounted for 7.7% of domestic emissions. Mexico has massive renewable energy potential that could be harnessed through solar photovoltaic (PV) technology. The problem to explore is the relationship between local and federal public strategies in MCMA and their stance on energy transition concern, social empowerment, new technology appropriation, and the will to boost social development and urban sustainability. A public policy typology was conducted through instruments of State intervention approach, based on political agenda articulation and environmental local interactions. Social equality is encouraged by means of forthright funding and in-kind support and energy policies focus on non-renewable energy subsidies and electric transmission infrastructure investment. There is a lack of vision for using PV technology as a guiding axis for marginalized population development. It is essential to promote economic and political rearrangement in order to level and structure environmental governance. It is essential to understand people's representation about their own needs along with renewable energy.

  9. Energy and spectrum efficiency in rural areas based on cognitive radio technology

    CSIR Research Space (South Africa)

    Masonta, MT

    2009-09-01

    Full Text Available . Among the leading areas of research and development in wireless communications, are techniques and mechanisms to implement the most cost effective and efficient utilization of the radio frequency spectrum and transmission energy. Radio frequency... spectrum is considered to be the most expensive and scarce resource among all wireless network resources, followed by the transmission energy. However, it has been noted that the scarcity of the frequency spectrum is mainly due to the adoption of a...

  10. Improved parameters metropolitan area network supported with all-optical network's technology

    Science.gov (United States)

    Gradkowska, Magdalena; Kalita, Mariusz

    2006-03-01

    The advantages of all-optical network's technics make them one of main elements of the metropolitan area networks. They enable different applications in high quality mulitimedia services and guarantee a constant and reliable access to the Internet. As the growing expansion of the Internet continues in an unpredictable direction, many new solutions are expected. The major challenge is the increasing demand for flexible, transparent and customised bandwidth services for both private and business customers.

  11. Interface of Science, Technology and Security: Areas of Most Concern, Now and Ahead

    Science.gov (United States)

    2017-03-28

    broad areas: 1) keep American agriculture competitive while ending world hunger; improve nutrition and end child obesity ; 3) improve food safety; 4...and to ensure mutual contributions occur as anticipated; and - to continue to build human capital, it is essential that students are exposed to the... College (“iCollege”) National Defense University Fort Lesley J. McNair Washington, D.C. USA Inho Kim, Ph.D. Director Agency for Defense Development

  12. Evaluation of Discrimination Technologies and Classification Results Live Site Demonstration: Former Waikoloa Maneuver Area

    Science.gov (United States)

    2015-06-01

    investigated to ensure that all TOI were recovered. 15. SUBJECT TERMS MetalMapper, UX -Analyze, UXO, Former Waikoloa Maneuver Area, discrimination...were calculated for each day’s data using the footprint coverage tool in Oasis montaj’s UX -Detect tool. 3.2.3 Success Criteria This objective was...algorithm in the UX -Detect package in Oasis montaj with a threshold of 5 millivolts. The Blakely test selections were then reviewed by the processor

  13. Identification of New Potential Scientific and Technology Areas for DoD Application. Summary of Activities

    Science.gov (United States)

    1986-07-31

    processing architecture or special chips specifically designed for feature enhancement (such as edges). Computacional vision becomes more important as the task...are intended to provide inputs for planning. Areas discussed include vision , natural language processing, architectures and expert systems. Work on...of the program: VISION Goal: To develop a system for controlling the motion of a land vehicle on basis of visual information about its environment

  14. RESULTS FROM RECENT SCIENCE AND TECHNOLOGY INVESTIGATIONS TARGETING CHROMIUM IN THE 100D AREA HANFORD SITE WASHINGTON USA

    Energy Technology Data Exchange (ETDEWEB)

    PETERSEN SW; THOMPSON KM; TONKIN MJ

    2009-12-03

    Sodium dichromate was used in Hanford's 100D Area during the reactor operations period of 1950 to 1964 to retard corrosion in the reactor cooling systems. Some of the sodium dichromate was released to the environment by spills and/or leaks from pipelines used to deliver the chemical to water treatment plants in the area. As a result, hexavalent chromium [Cr(VI)] has migrated through the vadose zone to the groundwater and contaminated nearly 1 km{sup 2} of groundwater to above the drinking water standard of 48 {micro}g/L. Three technology tests have recently been completed in this area to characterize the source area of the plumes and evaluate alternative methods to remove Cr(VI) from groundwater. These are (1) refine the source area of the southern plume; (2) test electrocoagulation as an alternative groundwater treatment technology; and (3) test the ability to repair a permeable reactive barrier by injecting micron or nanometer-size zero-valent iron (ZVI). The projects were funded by the US Department of Energy as part of a program to interject new technologies and accelerate active cleanup. Groundwater monitoring over the past 10 years has shown that Cr(VI) concentrations in the southern plume have not significantly diminished, strongly indicating a continuing source. Eleven groundwater wells were installed in 2007 and 2008 near a suspected source area and monitored for Cr(VI) and groundwater levels. Interpretation of these data has led to refinement of the source area location to an area of less than 1 hectare (ha, 2.5 acres). Vadose zone soil samples collected during drilling did not discover significant concentrations of Cr(VI), indicating the source is localized, with a narrow wetted path from the surface to the water table. Electrocoagulation was evaluated through a pilot-scale treatability test. Over 8 million liters of groundwater were treated to Cr(VI) concentrations of {le}20 {micro}g/L. The test determined that this technology has the potential to

  15. Using Technology of .Net Web Services in the Area of Automation

    Directory of Open Access Journals (Sweden)

    Martin Hnik

    2009-12-01

    Full Text Available This work deals with a technology for data exchange XML Web Services and its application to specific tasks. One of the applications created allows you to monitor and control the real thermal process through a number of client devices, independent of the operating system, the type or their location. The thermal process can be controlled, for example, by another process, a website or a mobile phone. The system is designed from its base and contains three main parts. The hardware part consists from a measuring card, actuators and temperature sensors. The core application is a server that is running the XML Web Service, Windows Service and SQL Server. Client software for mobile phones and web sites was also created.

  16. Project to aid development of an oil substituting fuel manufacturing technology in fiscal 1998. Report on the result of developing a technology to make cable covering materials into fuel; 1998 nendo sekiyu daitai nenryo seizo gijutsu kaihatsu hojo jigyo. Densen hifukuzai nenryoka gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development have been carried out with an objective to re-utilize waste cable covering materials as oil substituting energy. The research has been performed on behavior of chlorine and lead being substances that impede making the cable covering materials into fuel, development of a technology to remove chlorine, lead and copper, and pelletizing properties for fuel making. In the study of behavior of chlorine and lead, the following matters were made clear: dechlorination reaction completes within 30 minutes if pyrolysis temperature is higher than 300 degrees C; the more the amount of filler CaCO3 in test samples, the less the dechlorination amount; and secular deterioration does not affect the dechlorination amount. A technology has been developed successfully to remove the substances that hinder making the cover materials into fuel, achieving the target values of copper at 0.2% or less, lead at 0.3% or less, and chlorine at 5% or less. In developing the pelletizing technology that puts the cover materials into raw materials for blast furnaces, dechlorination rate of 90% was achieved by mixing coke/PVC at a ratio of 1/1 and dechlorinating it by using a rotary kiln. It was verified that the product is free of problems in particle size as the blast furnace raw material. (NEDO)

  17. Large-area printed supercapacitor technology for low-cost domestic green energy storage

    International Nuclear Information System (INIS)

    Tehrani, Z.; Thomas, D.J.; Korochkina, T.; Phillips, C.O.; Lupo, D.; Lehtimäki, S.; O'Mahony, J.; Gethin, D.T.

    2017-01-01

    In this research we demonstrate that a flexible ultra-thin supercapacitor can be fabricated using high volume screen printing process. This has enabled the sequential deposition of current collector, electrode, electrolyte materials and adhesive onto a Polyethylene terephthalate (PET) substrate in order to form flexible electrodes for reliable energy storage applications. The electrodes were based on an activated carbon ink and gel electrolyte each of which were formulated for this application. Supercapacitors that have surface areas from 100 to 1600 mm 2 and an assembled device thickness of 375 μm were demonstrated. The capacitance ranged from 50 to 400 mF. Capacitance of printed carbon electrodes is rarely reported in literature and no references were found. The chemistry developed during this study displayed long-term cycling potential and demonstrated the stability of the capacitor for continued usage. The gel electrolyte developed within this work showed comparable performance to that of a liquid counterpart. This improvement resulted in the reduction in gel resistance from 90Ω to 0.5Ω. Significant reduction was observed for all resistances. The solid-state supercapacitors with the gel electrolyte showed comparable performance to the supercapacitors that used a liquid electrolyte. This large area printed device can be used in future houses for reliable green energy storage. - Highlights: • It has been demonstrated that a flexible supercapacitors with large area storage has been developed. • The simplified architecture has the potential to lead to a new class of printable, thin storage devices. • The specific capacitance of 21 F/g was measured.

  18. Geothermal technology publications and related reports: a bibliography, January-December 1983

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, D.L. (ed.)

    1984-09-01

    This annotated bibliography covers the work of Sandia National Laboratories in the following areas: rock penetration mechanics, fluid technology, borehole mechanics, diagnostic technology, and systems analysis/program summaries. (MHR)

  19. Cover array string reconstruction

    OpenAIRE

    Crochemore, Maxime; S. Iliopoulos, Costas; P. Pissis, Solon; Tischler, German

    2010-01-01

    International audience; A proper factor u of a string y is a cover of y if every letter of y is within some occurrence of u in y. The concept generalises the notion of periods of a string. An integer array C is the minimal-cover (resp. maximal-cover) array of y if C[i] is the minimal (resp. maximal) length of covers of y[0.. i], or zero if no cover exists. In this paper, we present a constructive algorithm checking the validity of an array as a minimal-cover or maximal-cover array of some str...

  20. Land cover changes in central Sonora Mexico

    Science.gov (United States)

    Diego Valdez-Zamudio; Alejandro Castellanos-Villegas; Stuart Marsh

    2000-01-01

    Remote sensing techniques have been demonstrated to be very effective tools to help detect, analyze, and evaluate land cover changes in natural areas of the world. Changes in land cover can generally be attributed to either natural or anthropogenic forces. Multitemporal satellite imagery and airborne videography were used to detect, analyze, and evaluate land cover...

  1. Developed land cover of Puerto Rico

    Science.gov (United States)

    William A. Gould; Sebastian Martinuzzi; Olga M. Ramos Gonzalez

    2008-01-01

    This map shows the distribution of developed land cover in Puerto Rico (Martinuzzi et al. 2007). Developed land cover refers to urban, built-up and non-vegetated areas that result from human activity. These typically include built structures, concrete, asphalt, and other infrastructure. The developed land cover was estimated using Landsat 7 ETM+ satellite images pan...

  2. Technology demonstration: geostatistical and hydrologic analysis of salt areas. Assessment of effectiveness of geologic isolation systems

    International Nuclear Information System (INIS)

    Doctor, P.G.; Oberlander, P.L.; Rice, W.A.; Devary, J.L.; Nelson, R.W.; Tucker, P.E.

    1982-09-01

    The Office of Nuclear Waste Isolation (ONWI) requested Pacific Northwest Laboratory (PNL) to: (1) use geostatistical analyses to evaluate the adequacy of hydrologic data from three salt regions, each of which contains a potential nuclear waste repository site; and (2) demonstrate a methodology that allows quantification of the value of additional data collection. The three regions examined are the Paradox Basin in Utah, the Permian Basin in Texas, and the Mississippi Study Area. Additional and new data became available to ONWI during and following these analyses; therefore, this report must be considered a methodology demonstration here would apply as illustrated had the complete data sets been available. A combination of geostatistical and hydrologic analyses was used for this demonstration. Geostatistical analyses provided an optimal estimate of the potentiometric surface from the available data, a measure of the uncertainty of that estimate, and a means for selecting and evaluating the location of future data. The hydrologic analyses included the calculation of transmissivities, flow paths, travel times, and ground-water flow rates from hypothetical repository sites. Simulation techniques were used to evaluate the effect of optimally located future data on the potentiometric surface, flow lines, travel times, and flow rates. Data availability, quality, quantity, and conformance with model assumptions differed in each of the salt areas. Report highlights for the three locations are given

  3. Technology demonstration: geostatistical and hydrologic analysis of salt areas. Assessment of effectiveness of geologic isolation systems

    Energy Technology Data Exchange (ETDEWEB)

    Doctor, P.G.; Oberlander, P.L.; Rice, W.A.; Devary, J.L.; Nelson, R.W.; Tucker, P.E.

    1982-09-01

    The Office of Nuclear Waste Isolation (ONWI) requested Pacific Northwest Laboratory (PNL) to: (1) use geostatistical analyses to evaluate the adequacy of hydrologic data from three salt regions, each of which contains a potential nuclear waste repository site; and (2) demonstrate a methodology that allows quantification of the value of additional data collection. The three regions examined are the Paradox Basin in Utah, the Permian Basin in Texas, and the Mississippi Study Area. Additional and new data became available to ONWI during and following these analyses; therefore, this report must be considered a methodology demonstration here would apply as illustrated had the complete data sets been available. A combination of geostatistical and hydrologic analyses was used for this demonstration. Geostatistical analyses provided an optimal estimate of the potentiometric surface from the available data, a measure of the uncertainty of that estimate, and a means for selecting and evaluating the location of future data. The hydrologic analyses included the calculation of transmissivities, flow paths, travel times, and ground-water flow rates from hypothetical repository sites. Simulation techniques were used to evaluate the effect of optimally located future data on the potentiometric surface, flow lines, travel times, and flow rates. Data availability, quality, quantity, and conformance with model assumptions differed in each of the salt areas. Report highlights for the three locations are given.

  4. Consultancy on 'Knowledge preservation in the area of fast reactor technology'. Working material

    International Nuclear Information System (INIS)

    2002-01-01

    The fast reactor, which can generate electricity and breed additional fissile material for future fuel stocks is a resource that will be needed when economic uranium supplies for the advanced light water reactors or other thermal-spectrum options diminish. Further, the fast-fission fuel cycle in which material is recycled offers the flexibility needed to contribute decisively towards solving the problem of growing spent fuel inventories by greatly reducing the volume of high-level waste that must be disposed of in long-term repositories. This is a waste management option that also should be retained for future generations. The fast reactor has been the subject of research and development programs in a number of countries for upwards of 40 years. Now, despite early sharing and innovative worldwide research and development, ongoing work is confined to China, India, Japan, the Republic of Korea, and Russia. Information generated worldwide will be needed in the future. Presently, it is in danger of being lost even in those countries continuing the work. Some countries have already taken the issue of knowledge preservation seriously: Japan, France, Britain, and Russia, in particular. At worst, valuable contributory information elsewhere will be lost and would have to be regenerated when needed. The IAEA initiative seeks to establish a comprehensive, international inventory of fast reactor data and knowledge, which would be sufficient to form the basis for fast reactor development in 20 to 40 years from now. The Agency is in a good position to provide the framework for knowledge preservation efforts. Under Article III of its Statute, the IAEA is mandated to encourage and assist research on, and development and practical application of atomic energy for peaceful uses throughout the world. Obviously, an important aspect of this mandate is maintaining and increasing the knowledge that is necessary for the technological development. The main objectives of the consultancy

  5. Criticality Detection Using a Mirion Technologies DRM-2NC Remote Area Monitor Geiger-Mueller Probe

    Science.gov (United States)

    Kryskow, Adam P.

    The prompt fission neutron activation and subsequent response of a DRM-2NC Geiger-Mueller probe (manufactured by Mirion Technologies) was investigated for the purpose of creating a criticality accident detection algorithm with sensitivity and false positive suppression comparable to modern criticality accident detection systems. The expected decay pattern of secondary emissions arising from the neutron induced activity of the Geiger-Mueller probe was investigated experimentally in high neutron fluence environments at research reactors operated by the University of Massachusetts Lowell, Pennsylvania State University, and the White Sands Missile Range of Los Alamos National Laboratory. Monte Carlo techniques were used to both identify key probe materials responsible for the majority of the Geiger-Mueller response and investigate the effects of boron doping to increase detector sensitivity and enhance the signal to noise ratio. Subsequently, a statistical algorithm centered on a point weighted linear regression of the combined effective half-life was developed as the basis for criticality declaration. Final testing of the system indicated that the system was capable of meeting all ANSI criticality accident criteria with sufficient sensitivity to the minimum accident of concern, an adequate response time, and an extremely low likelihood of false alarm.

  6. Developments of large-area APD arrays for future applications to PET technology

    International Nuclear Information System (INIS)

    Kataoka, Jun

    2010-01-01

    Silicon avalanche photodiodes (APD) are solid-state devices which have internal gain. Since the good features of both photodiodes (PDs) and photomultiplier tubes (PMTs) are shared in a single device, APD offers new design for physics experiments and devices for nuclear medicine. In particular, thanks to its high quantum efficiency (QE) and low noise, reverse-type APDs generally show much better energy resolution than traditional PMTs when coupled to various scintillators. Most recently, we have developed various large area reverse-type APDs with Hamamatsu Photonics, up to 32 x 32 mm 2 square area. Such large dimensions have been awaited by researchers world-wide, and further extend the potential of APDs for various application such as in space science and nuclear medicine. For example, the use of APDs in space experiments is now validated thanks to successful launch of the Cute 1.7+APD II, which has measured both electron/proton distributions in Low Earth Orbit at E >9 keV. Moreover, the mission successfully demonstrated an active gain control system to keep the APD gain stable under moderate temperature variations. In other aspects, an APD is a compact, high performance light sensor that could be used in the strong magnetic field MRIs. An ultimate spatial resolution as better as sub-mm will be possible by adopting small pixel, high density APD pixels. Future PET detectors with time-of-flight (TOF) capability may be expected thanks to very fast time response of the APD devices. As a first step, we have developed a versatile APD-based positron emission tomography (PET) modules for future applications in high resolution, fast medical imaging. We will also discuss future use of digital (Geiger-mode) APDs, such as multi-pixel photon counter (MPPCs) in similar medical imaging applications. (author)

  7. Internetworking technological foundations and applications

    CERN Document Server

    Meinel, Christoph

    2013-01-01

    This book is supposed to serve as a comprehensive and instructive guide through the new world of digital communication. On the physical layer optical and electrical cabling technology are described as well as wireless communication technologies. On the data link layer local area networks (LANs) are introduced together with the most popular LAN technologies such as Ethernet, Token Ring, FDDI, and ATM as well as wireless LAN technologies including IEEE 802.x, Bluetooth, or ZigBee. A wide range of WAN technologies are covered including contemporary high speed technologies like PDH and SDH up to h

  8. Space Technology for Reduction of Desert Areas on Earth and Weather Control

    Directory of Open Access Journals (Sweden)

    Constantin SANDU

    2018-03-01

    Full Text Available In precedent papers the authors presented the idea of a space system composed of two opposite parabolic mirrors (large and small having the same focal point. This system is able to concentrate solar power in a strong light beam having irradiance of hundreds or thousands of times stronger than the solar irradiance on Earth's orbit. The system can be placed on a Sun synchronous orbit around the Earth or on the Earth’s orbit around the Sun at a distance of several hundred km from ground. When the concentrated light beam is directed toward the Earth surface it can locally melt, vaporize or decomposes tones of ground in its elements. This is happening because when the ground is hit by the light beam, ground temperature can reach thousands of degrees Celsius. At such temperatures the matter is decomposed into constitutive elements. For example, the silicate oxides which are frequently found in the composition of desert ground are decomposed into oxygen and silicon. Similarly, other oxides release oxygen and other type of oxides or constitutive elements. A network of deep and large channels can be dug in this way in hot deserts as Sahara. When these channels are connected with the seas & oceans, a network of water channels is created in those deserts. In this way, the local climate of deserts will change because channel water is vaporized during daytime when air temperature reaches 50ºC and condenses during nighttime when air temperature is around 0ºC. Presence of clouds over the hot deserts can lead to a reduction of ground temperature and rain follows. The channel water can be desalinized for producing drinking water and for irrigation using simple equipment. In addition to these advantages, channel deserts can be a solution for melting of polar ice calottes and flooding of seaside areas that are inhabited areas. On the other hand, the system composed of two opposite mirrors can be used for strength decreasing or deviation of hurricanes and

  9. Drivers, barriers, and strategies for implementation of renewable energy technologies in rural areas in Bangladesh-An innovation system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Alam Hossain Mondal, Md., E-mail: alam-hossain@uni-bonn.d [Center for Development Research (ZEF), University of Bonn, Walter-Flex-Str. 3, 53113 Bonn (Germany); Kamp, Linda M. [Delft University of Technology, TPM Faculty, Section Technology Dynamics and Sustainable Development, Jaffalaan 5, 2628 BX Delft (Netherlands); Pachova, Nevelina I. [Institute for Environment and Human Security, United Nations University, UNU-EHS, Hermann-Ehlers-Str. 10, 53113 Bonn (Germany)

    2010-08-15

    Bangladesh has good potential for harnessing renewable energy sources such as solar, biomass, wind, and mini-hydropower. The country has been experiencing a gradual shift towards exploring renewable energy resources as a driving force for rural development. A few public sector and non-government organizations have started to develop renewable energy technology (RET) projects in rural areas. The lessons learnt from different demonstrations of RET projects reveal that with careful forward planning renewable energy can provide far-reaching economic, environmental, and social benefits to people living in remote rural areas in Bangladesh. This paper identifies some of the barriers that need to be overcome for the successful development of renewable energy technology sector and betterment of rural livelihoods. It does so through a critical review of policy and institutional settings, as well as present status and lessons learnt from pilot demonstration of a number of RET projects undertaken by different organizations. The study highlights policy implications of the review with the aim of supporting decision makers in formulating renewable energy policies and future plans for Bangladesh.

  10. Drivers, barriers, and strategies for implementation of renewable energy technologies in rural areas in Bangladesh. An innovation system analysis

    Energy Technology Data Exchange (ETDEWEB)

    Alam Hossain Mondal, Md. [Center for Development Research (ZEF), University of Bonn, Walter-Flex-Str. 3, 53113 Bonn (Germany); Kamp, Linda M. [Delft University of Technology, TPM Faculty, Section Technology Dynamics and Sustainable Development, Jaffalaan 5, 2628 BX Delft (Netherlands); Pachova, Nevelina I. [Institute for Environment and Human Security, United Nations University, UNU-EHS, Hermann-Ehlers-Str. 10, 53113 Bonn (Germany)

    2010-08-15

    Bangladesh has good potential for harnessing renewable energy sources such as solar, biomass, wind, and mini-hydropower. The country has been experiencing a gradual shift towards exploring renewable energy resources as a driving force for rural development. A few public sector and non-government organizations have started to develop renewable energy technology (RET) projects in rural areas. The lessons learnt from different demonstrations of RET projects reveal that with careful forward planning renewable energy can provide far-reaching economic, environmental, and social benefits to people living in remote rural areas in Bangladesh. This paper identifies some of the barriers that need to be overcome for the successful development of renewable energy technology sector and betterment of rural livelihoods. It does so through a critical review of policy and institutional settings, as well as present status and lessons learnt from pilot demonstration of a number of RET projects undertaken by different organizations. The study highlights policy implications of the review with the aim of supporting decision makers in formulating renewable energy policies and future plans for Bangladesh. (author)

  11. Drivers, barriers, and strategies for implementation of renewable energy technologies in rural areas in Bangladesh-An innovation system analysis

    International Nuclear Information System (INIS)

    Alam Hossain Mondal, Md.; Kamp, Linda M.; Pachova, Nevelina I.

    2010-01-01

    Bangladesh has good potential for harnessing renewable energy sources such as solar, biomass, wind, and mini-hydropower. The country has been experiencing a gradual shift towards exploring renewable energy resources as a driving force for rural development. A few public sector and non-government organizations have started to develop renewable energy technology (RET) projects in rural areas. The lessons learnt from different demonstrations of RET projects reveal that with careful forward planning renewable energy can provide far-reaching economic, environmental, and social benefits to people living in remote rural areas in Bangladesh. This paper identifies some of the barriers that need to be overcome for the successful development of renewable energy technology sector and betterment of rural livelihoods. It does so through a critical review of policy and institutional settings, as well as present status and lessons learnt from pilot demonstration of a number of RET projects undertaken by different organizations. The study highlights policy implications of the review with the aim of supporting decision makers in formulating renewable energy policies and future plans for Bangladesh.

  12. INTERNATIONAL MIGRATION AND TECHNOLOGICAL MANAGEMENT IN COFFEE PRODUCTION IN TWO COMMUNITIES IN THE CENTRAL AREA OF VERACRUZ STATE

    Directory of Open Access Journals (Sweden)

    Martha Elena Nava-Tablada

    2011-07-01

    Full Text Available Veracruz comes third in terms of national coffee production; however this sector is facing a crisis because of the fall in prices in the international market which has resulted amongst other things in increased emigration to the United States. The aim of this study was to analyze the relationship between migration and the level of technology employed in coffee production in two communities in the central area of Veracruz State: Capulapa and Zapoapan. Information was obtained through observation and by interviewing the members of 46 family production units (FPU. In Zapoapan, the FPUs which presented the highest level of technological management in their coffee plantations were those with greatest access to capital, as they are more extensive, produce other crops than coffee, have more family members in the United States and receive greater remittances; investing 14% more in agriculture. In the case of the FPUs in Capulapa, no relationship was observed between the number of international emigrants, the amount of remittances received and the level of technological management. This may be because 83% of the FPUs cultivate solely coffee and are beholden to the ups and downs of the international market, thus their socio-economic situation is more precarious and 86% of remittances are directed towards family sustenance; with only 7% directed towards agricultural investment.

  13. The Impact of 3D Stacking and Technology Scaling on the Power and Area of Stereo Matching Processors

    Directory of Open Access Journals (Sweden)

    Seung-Ho Ok

    2017-02-01

    Full Text Available Recently, stereo matching processors have been adopted in real-time embedded systems such as intelligent robots and autonomous vehicles, which require minimal hardware resources and low power consumption. Meanwhile, thanks to the through-silicon via (TSV, three-dimensional (3D stacking technology has emerged as a practical solution to achieving the desired requirements of a high-performance circuit. In this paper, we present the benefits of 3D stacking and process technology scaling on stereo matching processors. We implemented 2-tier 3D-stacked stereo matching processors with GlobalFoundries 130-nm and Nangate 45-nm process design kits and compare them with their two-dimensional (2D counterparts to identify comprehensive design benefits. In addition, we examine the findings from various analyses to identify the power benefits of 3D-stacked integrated circuit (IC and device technology advancements. From experiments, we observe that the proposed 3D-stacked ICs, compared to their 2D IC counterparts, obtain 43% area, 13% power, and 14% wire length reductions. In addition, we present a logic partitioning method suitable for a pipeline-based hardware architecture that minimizes the use of TSVs.

  14. The Impact of 3D Stacking and Technology Scaling on the Power and Area of Stereo Matching Processors.

    Science.gov (United States)

    Ok, Seung-Ho; Lee, Yong-Hwan; Shim, Jae Hoon; Lim, Sung Kyu; Moon, Byungin

    2017-02-22

    Recently, stereo matching processors have been adopted in real-time embedded systems such as intelligent robots and autonomous vehicles, which require minimal hardware resources and low power consumption. Meanwhile, thanks to the through-silicon via (TSV), three-dimensional (3D) stacking technology has emerged as a practical solution to achieving the desired requirements of a high-performance circuit. In this paper, we present the benefits of 3D stacking and process technology scaling on stereo matching processors. We implemented 2-tier 3D-stacked stereo matching processors with GlobalFoundries 130-nm and Nangate 45-nm process design kits and compare them with their two-dimensional (2D) counterparts to identify comprehensive design benefits. In addition, we examine the findings from various analyses to identify the power benefits of 3D-stacked integrated circuit (IC) and device technology advancements. From experiments, we observe that the proposed 3D-stacked ICs, compared to their 2D IC counterparts, obtain 43% area, 13% power, and 14% wire length reductions. In addition, we present a logic partitioning method suitable for a pipeline-based hardware architecture that minimizes the use of TSVs.

  15. Parcels and Land Ownership, The Tax Parcel shows the area and boundary of each property in a seamless layer covering the whole county along with the ability to connect to other matching tables., Published in 2011, 1:1200 (1in=100ft) scale, Washington County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Parcels and Land Ownership dataset current as of 2011. The Tax Parcel shows the area and boundary of each property in a seamless layer covering the whole county...

  16. Innovative technologies of outsourcing at the machine-building enterprises of Sverdlovsk area

    Directory of Open Access Journals (Sweden)

    P. P. Krylatkov

    2010-09-01

    Full Text Available The analysis of the basic problems connected with infringements of integrity of the machine-building enterprises of Sverdlovsk area is lead in the article. The specified problems are considered from a position of the complete approach developed by the author. Display of infringements of integrity of some the enterprises are illustrated by data of their inspection. As the effective tool of increase of integrity of the enterprises — expansion use of attitudes of outsourcing is offered. The comparative given applications of outsourcing in developed the country of the West and at the domestic enterprises, and also its benefits and risks are cited. Outsourcing, insoursing and subcontracting are considered by the author as the innovative tool of the decision of many serious problems of the machine-building enterprises of region. As an example practice of work of «The Sverdlovsk regional center of industrial cooperation» on coordination of attitudes of outsourcing, subcontracting and cooperation is offered. The author recommends the tabulated form, with the instruction of kinds of works for which performance the method of allocation or attraction outsourcing of the companies can be used.

  17. State of the art survey of technologies applicable to NASA's aeronautics, avionics and controls program

    Science.gov (United States)

    Smyth, R. K. (Editor)

    1979-01-01

    The state of the art survey (SOAS) covers six technology areas including flightpath management, aircraft control system, crew station technology, interface & integration technology, military technology, and fundamental technology. The SOAS included contributions from over 70 individuals in industry, government, and the universities.

  18. The psycho-sociological impact of a large technological development on a rural area with specific reference to the Mossel Bay area

    International Nuclear Information System (INIS)

    Waal, H.S. de.

    1989-05-01

    The public acceptability of large technological developments was studied. A socio-economic baseline profile of the community was compiled in an attempt to measure the inherent ability of a community to adjust to changes brought about by large developments. The framework within which the study was conducted included the demographic composition, the economic activity, the infrastructure of the private and public sectors, the organisational composition of the community, the expectations members of the community had in respect of the possible developments, the attitudes of the community towards itself, as well as towards outsiders and finally, the degree of solidarity that exists amongst them in respect of these attitudes. With information regarding the intended developments, certain extrapolations were made in respect of possible tendencies and changes that may come about in the demographic composition of the community. In the light of these predictions certain potential future problems were identified and pre-emptive recommendations were made accordingly. Of the most important observations that can be made is the fact that the methods used were adequate to achieve a detailed baseline profile of the community, its qualities, attitudes and expectations. The detail was sufficient to enable the researcher to compare the communities living in the different residential areas. Information gathered from interviews with leading figures turned out to be a useful tool in the verification of data gathered by way of questionnaires. 71 figs., 110 tabs., 176 refs

  19. EnviroAtlas - Land Cover for the Conterminous United States

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset represents the percentage of land area that is classified as forest land cover, modified forest land cover, and natural land cover using the 2006...

  20. Branched polynomial covering maps

    DEFF Research Database (Denmark)

    Hansen, Vagn Lundsgaard

    2002-01-01

    A Weierstrass polynomial with multiple roots in certain points leads to a branched covering map. With this as the guiding example, we formally define and study the notion of a branched polynomial covering map. We shall prove that many finite covering maps are polynomial outside a discrete branch...... set. Particular studies are made of branched polynomial covering maps arising from Riemann surfaces and from knots in the 3-sphere. (C) 2001 Elsevier Science B.V. All rights reserved....

  1. Branched polynomial covering maps

    DEFF Research Database (Denmark)

    Hansen, Vagn Lundsgaard

    1999-01-01

    A Weierstrass polynomial with multiple roots in certain points leads to a branched covering map. With this as the guiding example, we formally define and study the notion of a branched polynomial covering map. We shall prove that many finite covering maps are polynomial outside a discrete branch...... set. Particular studies are made of branched polynomial covering maps arising from Riemann surfaces and from knots in the 3-sphere....

  2. Older family carers in rural areas: experiences from using caregiver support services based on Information and Communication Technology (ICT).

    Science.gov (United States)

    Blusi, Madeleine; Asplund, Kenneth; Jong, Mats

    2013-09-01

    The aim of this intervention study was to illuminate the meaning of ICT-based caregiver support as experienced by older family carers living in vast rural areas, caring for a spouse at home. In order to access, the support service participants were provided with a computer and high speed Internet in their homes. Semi structured webcam-interviews were carried out with 31 family carers. A strategy for webcam interviewing was developed to ensure quality and create a comfortable interview situation for the family carers. Interviews were analysed using content analyses, resulting in the themes: Adopting new technology with help from others and Regaining social inclusion . The results indicate that ICT-based support can be valuable for older family carers in rural areas as it contributes to improve quality in daily life in a number of ways. In order to fully experience the benefits, family carers need to be frequent users of the provided support. Adequate training and encouragement from others were essential in motivating family carers to use the support service. Access to Internet and webcamera contributed to reducing loneliness and isolation, strengthening relationships with relatives living far away and enabled access to services no longer available in the area. Use of the ICT-service had a positive influence on the relationship between the older carer and adult grandchildren. It also contributed to carer competence and promote feelings of regaining independence and a societal role.

  3. Branched polynomial covering maps

    DEFF Research Database (Denmark)

    Hansen, Vagn Lundsgaard

    2002-01-01

    A Weierstrass polynomial with multiple roots in certain points leads to a branched covering map. With this as the guiding example, we formally define and study the notion of a branched polynomial covering map. We shall prove that many finite covering maps are polynomial outside a discrete branch ...

  4. The large area crop inventory experiment: An experiment to demonstrate how space-age technology can contribute to solving critical problems here on earth

    Science.gov (United States)

    1977-01-01

    The large area crop inventory experiment is being developed to predict crop production through satellite photographs. This experiment demonstrates how space age technology can contribute to solving practical problems of agriculture management.

  5. Status and Benefits of Renewable Energy Technologies in the Rural Areas of Ethiopia: A Case Study on Improved Cooking Stoves and Biogas Technologies

    Directory of Open Access Journals (Sweden)

    Yitayal Addis Alemayehu

    2015-07-01

    Full Text Available The majority of Ethiopia’s people (85% reside in rural areas, deriving their livelihood from agriculture. Ethiopia’s energy system is characterized mainly by biomass fuel supply, with households being the greatest energy consumers. The household sector takes up nearly 94 % of the total energy supplies. Access to energy resources and technologies in rural Ethiopia is highly constrained which makes the energy supply and consumption pattern of the country to show many elements of un-sustainability. The concern on cooking practices, household economics, health, forest and agricultural resource management, and global greenhouse gas emissions has emerged as a transformative opportunity to improve individual lives, livelihoods, and the global environment. More decentralized renewable energy projects could play an important role in mitigating traditional biomass fuel use. Improved cooking stove (ICS dissemination projects have been launched involving the private sector in the production and commercialization of the stoves. In doing so, about 3.7 million ICSs have been disseminated in the country so far which benefited stove users, producers and the total environment as about 30 million hectare of forest per year can be conserved. Conversion of animal waste to biogas energy to replace traditional fuel and use of the slurry as a fertilizer is the other current focus of the government of Ethiopia and installed more than 860 biogas digesters. The benefits obtained from these technologies are considerable and promising. However, the programs are not that much benefited the rural households where it had been intended to address. So, due attention should be given for those of the rural households in order to address the fuel wood crisis, environmental degradation and their health condition.

  6. Very large mode area ytterbium fiber amplifier with aluminum-doped pump cladding made by powder sinter technology

    International Nuclear Information System (INIS)

    He, Wenbin; Leich, Martin; Grimm, Stephan; Kobelke, Jens; Zhu, Yuan; Bartelt, Hartmut; Jäger, Matthias

    2015-01-01

    We demonstrate amplification experiments using a very large mode area Yb-doped double-clad fiber with 100 µm aluminum-cer codoped core and 440 µm pump cladding realized by high aluminum codoping. The material for core and pump cladding was fabricated by reactive powder sinter technology. A high numerical aperture (NA) of the pump cladding with NA = 0.21 and a low one of the core with NA = 0.084 could be realized. Using a 0.55 m short fiber sample as the main amplifier in a three-stage ns pulsed fiber master oscillator power amplifier system we achieved 3 ns, 2 mJ output pulses with 360 kW peak power limited by the available pump power. Stimulated Raman scattering effects and amplified spontaneous emission were successfully suppressed. (letter)

  7. Developing a concept of social-ecological-technological systems to characterize resilience of urban areas and infrastructure to extreme events

    Science.gov (United States)

    Chester, M.; Grimm, N. B.; Redman, C.; Miller, T.; McPherson, T.; Munoz-Erickson, T.; Chandler, D. G.

    2015-12-01

    Climate change is widely considered one of the greatest challenges to global sustainability, with extreme events being the most immediate way that people experience this phenomenon. Urban areas are particularly vulnerable to these events given their location, concentration of people, and increasingly complex and interdependent infrastructure. We are developing a conceptual framework for urban social-ecological-technological systems (SETS) that will allow researchers and practitioners to assess how infrastructure can be resilient, provide ecosystem services, improve social well being, and exploit new technologies in ways that benefit urban populations. The framework integrates the three domains of social and equity issues, environmental quality and protection, and technical/engineering aspects, to form a concept of infrastructure that occurs at the intersection of the domains. Examples show how the more common socioecological systems and socially sensitive engineering approaches that fail to incorporate the third dimension may elevate vulnerability to climate-related disaster. The SETS conceptual framework bridges currently siloed social science, environmental science, and engineering approaches to significantly advance research into the structure, function, and emergent properties of SETS. Extreme events like heat waves in Phoenix; coastal and urban flooding in the wake of superstorm Sandy and following hurricanes in Miami, FL; drought in Mexico; and urban flooding in Baltimore, Portland, San Juan PR, Syracuse, and Valdivia, Chile provide examples of the impacts of and vulnerability to extreme events that demand a new approach. The infrastructure of the future must be resilient, leverage ecosystem services, improve social well being, and exploit new technologies in ways that benefit all segments of urban populations and are appropriate to the particular urban contexts. These contexts are defined not only by the biophysical environment but also by culture and

  8. Paleomagnetic and magnetic fabric studies of Lower Triassic red sandstones from the autochthonous cover of the Central Western Carpathians: new insights into paleogeographic setting and tectonic evolution of the area

    Science.gov (United States)

    Szaniawski, R.; Jankowski, L.; Ludwiniak, M.; Mazzoli, S.; Szczygieł, J.

    2017-12-01

    The Carpathian Mountains were formed through progressive collision and amalgamation of the Alcapa and Tisza-Dacia microplates with the European Platform. The Central Western Carpathians (CWC) tectonic unit analyzed in this study constitutes a fragment of the Alcapa microplate - research in this area is therefore of great importance in the context of the geotectonic evolution of the Carpathian orogen. Our paleomagnetic and magnetic fabric studies were focused on Lower Triassic red sandstones from the autochthonous cover of the crystalline basement. We present new results from three mountain massifs: Low Tatra, Velka Fatra and Strazovske Vrchy, comparing them with our earlier works performed in the Tatra Mts. Rockmagnetic studies reveal similar results in all four studied regions - the dominant ferromagnetic carrier in red sandstones is hematite, while the magnetic fabric is mostly controlled by paramagnetic minerals. AMS results outline a bedding parallel foliation and a tectonic lineation. This lineation lies in the bedding plane but is somewhat oblique to the present horizontal plane. The fact that the lineation is not exactly parallel to the strike of the beds is most likely due to multistage deformation: the lineation is related to bedding parallel shortening associated with the folding and thrusting stage, while present-day bedding attitude results at least partially from rotations associated with subsequent uplift and/or faulting. Paleomagnetic analysis indicate that hematite carrier records characteristic remanent component of high unblocking temperatures (680°C) and both normal (dominant) and reversed polarity. Paleomagnetic inclinations are similar to those expected from reference paleomagnetic data from the European Platform. Declination values are rather similar in all four studied areas and imply moderate counterclockwise rotations of the CWC. These results are incompatible with some of the previous paleomagnetic studies of younger rocks from the CWC

  9. Human monitoring, smart health and assisted living techniques and technologies

    CERN Document Server

    Longhi, Sauro; Freddi, Alessandro

    2017-01-01

    This book covers the three main scientific and technological areas critical for improving people's quality of life - namely human monitoring, smart health and assisted living - from both the research and development points of view.

  10. A Robust WLS Power System State Estimation Method Integrating a Wide-Area Measurement System and SCADA Technology

    Directory of Open Access Journals (Sweden)

    Tao Jin

    2015-04-01

    Full Text Available With the development of modern society, the scale of the power system is rapidly increased accordingly, and the framework and mode of running of power systems are trending towards more complexity. It is nowadays much more important for the dispatchers to know exactly the state parameters of the power network through state estimation. This paper proposes a robust power system WLS state estimation method integrating a wide-area measurement system (WAMS and SCADA technology, incorporating phasor measurements and the results of the traditional state estimator in a post-processing estimator, which greatly reduces the scale of the non-linear estimation problem as well as the number of iterations and the processing time per iteration. This paper firstly analyzes the wide-area state estimation model in detail, then according to the issue that least squares does not account for bad data and outliers, the paper proposes a robust weighted least squares (WLS method that combines a robust estimation principle with least squares by equivalent weight. The performance assessment is discussed through setting up mathematical models of the distribution network. The effectiveness of the proposed method was proved to be accurate and reliable by simulations and experiments.

  11. Emergy-based comparative analysis on industrial clusters: economic and technological development zone of Shenyang area, China.

    Science.gov (United States)

    Liu, Zhe; Geng, Yong; Zhang, Pan; Dong, Huijuan; Liu, Zuoxi

    2014-09-01

    In China, local governments of many areas prefer to give priority to the development of heavy industrial clusters in pursuit of high value of gross domestic production (GDP) growth to get political achievements, which usually results in higher costs from ecological degradation and environmental pollution. Therefore, effective methods and reasonable evaluation system are urgently needed to evaluate the overall efficiency of industrial clusters. Emergy methods links economic and ecological systems together, which can evaluate the contribution of ecological products and services as well as the load placed on environmental systems. This method has been successfully applied in many case studies of ecosystem but seldom in industrial clusters. This study applied the methodology of emergy analysis to perform the efficiency of industrial clusters through a series of emergy-based indices as well as the proposed indicators. A case study of Shenyang Economic Technological Development Area (SETDA) was investigated to show the emergy method's practical potential to evaluate industrial clusters to inform environmental policy making. The results of our study showed that the industrial cluster of electric equipment and electronic manufacturing produced the most economic value and had the highest efficiency of energy utilization among the four industrial clusters. However, the sustainability index of the industrial cluster of food and beverage processing was better than the other industrial clusters.

  12. Scientific and technological capabilities in health-related areas: opportunities, challenges, and interactions with the industrial sector.

    Science.gov (United States)

    Vargas, Marco Antonio; Britto, Jorge

    2016-11-03

    Characterization of the scientific and technological infrastructure in health and its interactions with the industrial sector provides key elements for understanding the dynamics of innovation in health. This study conducts an exploratory analysis of the potentialities and limitations associated with scientific and technological capabilities in the health area in Brazil and the different links between the scientific and industrial sectors in health. The analysis points to important growth in internationally indexed research output, especially in certain areas such as pharmaceutics, public health, genetics, morphology, physiology, and microbiology. There has also been important growth in research groups that interact with the industrial sector in selected areas of health. The study highlights the importance of building more solid and permanent bridges between companies, research institutions, and the health system, linking the knowledge developed in research institutions to the dynamics of the industrial sector in health. Resumo: A caracterização da infraestrutura científica e tecnológica na área da saúde e das suas formas de articulação com a base produtiva representam elementos centrais na compreensão da dinâmica de inovação em saúde. Este estudo faz uma análise exploratória sobre as potencialidades e limitações associadas às capacitações científicas e tecnológicas na área da saúde no Brasil e as formas de articulação entre a base científica e a base produtiva em saúde. A análise aponta para o crescimento expressivo da produção bibliográfica com circulação internacional no campo da saúde, particularmente em determinadas áreas como farmácia, saúde coletiva, genética, morfologia, fisiologia e microbiologia. Além disso, observa-se um crescimento expressivo dos grupos de pesquisa com relacionamentos com o setor produtivo em áreas selecionadas da saúde. Destaca-se a importância da construção de pontes mais sólidas e

  13. Mekong Land Cover Dasboard: Regional Land Cover Mointoring Systems

    Science.gov (United States)

    Saah, D. S.; Towashiraporn, P.; Aekakkararungroj, A.; Phongsapan, K.; Triepke, J.; Maus, P.; Tenneson, K.; Cutter, P. G.; Ganz, D.; Anderson, E.

    2016-12-01

    SERVIR-Mekong, a USAID-NASA partnership, helps decision makers in the Lower Mekong Region utilize GIS and Remote Sensing information to inform climate related activities. In 2015, SERVIR-Mekong conducted a geospatial needs assessment for the Lower Mekong countries which included individual country consultations. The team found that many countries were dependent on land cover and land use maps for land resource planning, quantifying ecosystem services, including resilience to climate change, biodiversity conservation, and other critical social issues. Many of the Lower Mekong countries have developed national scale land cover maps derived in part from remote sensing products and geospatial technologies. However, updates are infrequent and classification systems do not always meet the needs of key user groups. In addition, data products stop at political boundaries and are often not accessible making the data unusable across country boundaries and with resource management partners. Many of these countries rely on global land cover products to fill the gaps of their national efforts, compromising consistency between data and policies. These gaps in national efforts can be filled by a flexible regional land cover monitoring system that is co-developed by regional partners with the specific intention of meeting national transboundary needs, for example including consistent forest definitions in transboundary watersheds. Based on these facts, key regional stakeholders identified a need for a land cover monitoring system that will produce frequent, high quality land cover maps using a consistent regional classification scheme that is compatible with national country needs. SERVIR-Mekong is currently developing a solution that leverages recent developments in remote sensing science and technology, such as Google Earth Engine (GEE), and working together with production partners to develop a system that will use a common set of input data sources to generate high

  14. [Effects of application of pulse contour cardiac output monitoring technology in early treatment of patients with large area burns].

    Science.gov (United States)

    Wang, D Y; Xie, W G; Xi, M M; Li, Z; Wang, B

    2018-01-20

    Objective: To analyze the changes and relationship of early hemodynamic indexes of patients with large area burns monitored by pulse contour cardiac output (PiCCO) monitoring technology, so as to assess the guiding value of this technology in the treatment of patients with large area burns during shock period. Methods: Eighteen patients with large area burns, confirming to the study criteria, were admitted to our unit from May 2016 to May 2017. Pulse contour cardiac output index (PCCI), systemic vascular resistance index (SVRI), global end-diastolic volume index (GEDVI), and extravascular lung water index (EVLWI) of patients were monitored by PiCCO instrument from admission to post injury day (PID) 7, and they were calibrated and recorded once every four hours. The fluid infusion coefficients of patients at the first and second 24 hours post injury were calculated. The blood lactic acid values of patients from PID 1 to 7 were also recorded. The correlations among PCCI, SVRI, and GEDVI as well as the correlation between SVRI and blood lactic acid of these 18 patients were analyzed. Prognosis of patients were recorded. Data were processed with one-way analysis of variance, single sample t test and Bonferroni correction, Pearson correlation analysis, and Spearman rank correlation analysis. Results: (1) There was statistically significant difference in PCCI value of patients from post injury hour (PIH) 4 to 168 ( F =7.428, P 0.05). (2) There was statistically significant difference in SVRI value of patients from PIH 4 to 168 ( F =7.863, P 0.05). (3) There was no statistically significant difference in the GEDVI values of patients from PIH 4 to 168 ( F =0.704, P >0.05). The GEDVI values of patients at PIH 8, 12, 16, 20, and 24 were significantly lower than normal value ( t =-3.112, -3.554, -2.969, -2.450, -2.476, P 0.05). (4) There was statistically significant difference in EVLWI value of patients from PIH 4 to 168 ( F =1.859, P 0.05). (5) The fluid infusion

  15. Percent Forest Cover (Future)

    Data.gov (United States)

    U.S. Environmental Protection Agency — Forests provide economic and ecological value. High percentages of forest cover (FORPCTFuture) generally indicate healthier ecosystems and cleaner surface water....

  16. Percent Forest Cover

    Data.gov (United States)

    U.S. Environmental Protection Agency — Forests provide economic and ecological value. High percentages of forest cover (FORPCT) generally indicate healthier ecosystems and cleaner surface water. More...

  17. Awareness of Emerging Wireless Technologies: Ad-hoc and Personal Area Networks Standards and Emerging Technologies (Sensibilisation a l'emergence des technologies sans fil: technologies emergeantes et normes de reseaux personnels et ad-hoc)

    National Research Council Canada - National Science Library

    Stassinopoulos, George; Boucher, L; Churavy, M; Plesse, T; Marquart, D; Kyriazakos, S; Papaoulakis, N; Nikitopoulos, D; Maseng, T

    2007-01-01

    .... The report starts with ad-hoc networking concepts and maturing technological solutions. Ad-hoc networking is a necessary companion to wireless communication, due to the inherent lack of reliability of any wireless based link level protocol...

  18. Next generation of global land cover characterization, mapping, and monitoring

    Science.gov (United States)

    Giri, Chandra; Pengra, Bruce; Long, J.; Loveland, Thomas R.

    2013-01-01

    Land cover change is increasingly affecting the biophysics, biogeochemistry, and biogeography of the Earth's surface and the atmosphere, with far-reaching consequences to human well-being. However, our scientific understanding of the distribution and dynamics of land cover and land cover change (LCLCC) is limited. Previous global land cover assessments performed using coarse spatial resolution (300 m–1 km) satellite data did not provide enough thematic detail or change information for global change studies and for resource management. High resolution (∼30 m) land cover characterization and monitoring is needed that permits detection of land change at the scale of most human activity and offers the increased flexibility of environmental model parameterization needed for global change studies. However, there are a number of challenges to overcome before producing such data sets including unavailability of consistent global coverage of satellite data, sheer volume of data, unavailability of timely and accurate training and validation data, difficulties in preparing image mosaics, and high performance computing requirements. Integration of remote sensing and information technology is needed for process automation and high-performance computing needs. Recent developments in these areas have created an opportunity for operational high resolution land cover mapping, and monitoring of the world. Here, we report and discuss these advancements and opportunities in producing the next generations of global land cover characterization, mapping, and monitoring at 30-m spatial resolution primarily in the context of United States, Group on Earth Observations Global 30 m land cover initiative (UGLC).

  19. Handbook of manufacturing engineering and technology

    CERN Document Server

    2015-01-01

    The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

  20. Magnetic Suspension Technology Workshop

    International Nuclear Information System (INIS)

    Keckler, C.R.; Groom, N.J.; Britcher, C.P.

    1993-01-01

    In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided. Separate abstracts have been prepared for articles from this report

  1. Covered Bridge Security Manual

    Science.gov (United States)

    Brett Phares; Terry Wipf; Ryan Sievers; Travis Hosteng

    2013-01-01

    The design, construction, and use of covered timber bridges is all but a lost art in these days of pre-stressed concrete, high-performance steel, and the significant growth both in the volume and size of vehicles. Furthermore, many of the existing covered timber bridges are preserved only because of their status on the National Registry of Historic Places or the...

  2. An Overview of Future NASA Missions, Concepts, and Technologies Related to Imaging of the World's Land Areas

    Science.gov (United States)

    Salomonson, Vincent V.

    1999-01-01

    In the near term NASA is entering into the peak activity period of the Earth Observing System (EOS). The EOS AM-1 /"Terra" spacecraft is nearing launch and operation to be followed soon by the New Millennium Program (NMP) Earth Observing (EO-1) mission. Other missions related to land imaging and studies include EOS PM-1 mission, the Earth System Sciences Program (ESSP) Vegetation Canopy Lidar (VCL) mission, the EOS/IceSat mission. These missions involve clear advances in technologies and observational capability including improvements in multispectral imaging and other observing strategies, for example, "formation flying". Plans are underway to define the next era of EOS missions, commonly called "EOS Follow-on" or EOS II. The programmatic planning includes concepts that represent advances over the present Landsat-7 mission that concomitantly recognize the advances being made in land imaging within the private sector. The National Polar Orbiting Environmental Satellite Series (NPOESS) Preparatory Project (NPP) is an effort that will help to transition EOS medium resolution (herein meaning spatial resolutions near 500 meters), multispectral measurement capabilities such as represented by the EOS Moderate Resolution Imaging Spectroradiometer (MODIS) into the NPOESS operational series of satellites. Developments in Synthetic Aperture Radar (SAR) and passive microwave land observing capabilities are also proceeding. Beyond these efforts the Earth Science Enterprise Technology Strategy is embarking efforts to advance technologies in several basic areas: instruments, flight systems and operational capability, and information systems. In the case of instruments architectures will be examined that offer significant reductions in mass, volume, power and observational flexibility. For flight systems and operational capability, formation flying including calibration and data fusion, systems operation autonomy, and mechanical and electronic innovations that can reduce

  3. [Spatiotemporal expansion of urban and rural built-up areas in Shenyang City: an analysis based on remote sensing and GIS technology].

    Science.gov (United States)

    Zhou, Rui; Li, Yue-Hui; Hu, Yuan-Man; Xi, Feng-Ming; Shan, Tao; He, Hong-Shi; Liu, Miao; Wang, Jin-Nian

    2009-10-01

    By using 1985, 1995, 1997, 2000 and 2004 satellite images and GIS technology, three indices including built-up area density, expansion intensity index, and fractal dimension were chosen to analyze the spatiotemporal characteristics, spatial differentiation, and morphological changes of urban and rural built-up areas in Shenyang City in 1985-2004, with the main driving factors discussed. In the study period, the high-density area of urban built-up area in the City increased year by year, and that of rural built-up area changed slightly before 1997 but increased gradually thereafter. The increased area, expansion speed, and expansion intensity of built-up area were evidently greater in urban than in rural area. An obvious spatial differentiation was observed in the expansion of built-up area between urban and rural areas, with the high-speed expansion mainly concentrated in urban area. The fractal dimension in urban area increased gradually, which meant that the integrated configuration of urban area became more and more complex, while that in rural area changed irregularly, because of the lack of reasonable planning and construction. Economic development, population growth, transportation, natural environment, policy-guiding, and urban planning were the main driving forces of the expansion of built-up areas in Shenyang City.

  4. Flat covers of modules

    CERN Document Server

    Xu, Jinzhong

    1996-01-01

    Since the injective envelope and projective cover were defined by Eckmann and Bas in the 1960s, they have had great influence on the development of homological algebra, ring theory and module theory. In the 1980s, Enochs introduced the flat cover and conjectured that every module has such a cover over any ring. This book provides the uniform methods and systematic treatment to study general envelopes and covers with the emphasis on the existence of flat cover. It shows that Enochs' conjecture is true for a large variety of interesting rings, and then presents the applications of the results. Readers with reasonable knowledge in rings and modules will not have difficulty in reading this book. It is suitable as a reference book and textbook for researchers and graduate students who have an interest in this field.

  5. Identification of remediation needs and technology development focus areas for the Environmental Restoration (ER) Project at Sandia National Laboratories/New Mexico (SNL/NM)

    International Nuclear Information System (INIS)

    Tucker, M.D.

    1995-06-01

    The Environmental Restoration (ER) Project has been tasked with the characterization, assessment, remediation and long-term monitoring of contaminated waste sites at Sandia National Laboratories/New Mexico (SNL/NM). Many of these sites will require remediation which will involve the use of baseline technologies, innovative technologies that are currently under development, and new methods which will be developed in the near future. The Technology Applications Program (TAP) supports the ER Project and is responsible for development of new technologies for use at the contaminated waste sites, including technologies that will be used for remediation and restoration of these sites. The purpose of this report is to define the remediation needs of the ER Project and to identify those remediation needs for which the baseline technologies and the current development efforts are inadequate. The area between the remediation needs and the existing baseline/innovative technology base represents a technology gap which must be filled in order to remediate contaminated waste sites at SNL/NM economically and efficiently. In the first part of this report, the remediation needs of the ER Project are defined by both the ER Project task leaders and by TAP personnel. The next section outlines the baseline technologies, including EPA defined Best Demonstrated Available Technologies (BDATs), that are applicable at SNL/NM ER sites. This is followed by recommendations of innovative technologies that are currently being developed that may also be applicable at SNL/NM ER sites. Finally, the gap between the existing baseline/innovative technology base and the remediation needs is identified. This technology gap will help define the future direction of technology development for the ER Project

  6. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  7. EPA-developed, patented technologies related to miscellaneous areas of environmental experties and invention that are available for licensing

    Data.gov (United States)

    U.S. Environmental Protection Agency — Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be...

  8. EPA-developed, patented technologies related to miscellaneous areas of environmental experties and invention that are available for licensing

    Science.gov (United States)

    Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace. These technologies relate to ecological research, human health, and manufacturing.

  9. Awareness of Emerging Wireless Technologies: Ad-hoc and Personal Area Networks Standards and Emerging Technologies (Sensibilisation a l’emergence des technologies sans fil: technologies emergeantes et normes de reseaux personnels et ad-hoc)

    Science.gov (United States)

    2007-04-01

    rubrique PAN (réseaux personnels). Ces technologies, avec un accent sur une faible alimentation , doivent être également vues dans le contexte d’une...the smart healthy home, the professional environment and the fancy futuristic multimedia traveler. Corresponding environment for military

  10. Covering folded shapes

    Directory of Open Access Journals (Sweden)

    Oswin Aichholzer

    2014-05-01

    Full Text Available Can folding a piece of paper flat make it larger? We explore whether a shape S must be scaled to cover a flat-folded copy of itself. We consider both single folds and arbitrary folds (continuous piecewise isometries \\(S\\to\\mathbb{R}^2\\. The underlying problem is motivated by computational origami, and is related to other covering and fixturing problems, such as Lebesgue's universal cover problem and force closure grasps. In addition to considering special shapes (squares, equilateral triangles, polygons and disks, we give upper and lower bounds on scale factors for single folds of convex objects and arbitrary folds of simply connected objects.

  11. Evapotranspiration (ET) covers.

    Science.gov (United States)

    Rock, Steve; Myers, Bill; Fiedler, Linda

    2012-01-01

    Evapotranspiration (ET) cover systems are increasingly being used at municipal solid waste (MSW) landfills, hazardous waste landfills, at industrial monofills, and at mine sites. Conventional cover systems use materials with low hydraulic permeability (barrier layers) to minimize the downward migration of water from the surface to the waste (percolation), ET cover systems use water balance components to minimize percolation. These cover systems rely on soil to capture and store precipitation until it is either transpired through vegetation or evaporated from the soil surface. Compared to conventional membrane or compacted clay cover systems, ET cover systems are expected to cost less to construct. They are often aesthetic because they employ naturalized vegetation, require less maintenance once the vegetative system is established, including eliminating mowing, and may require fewer repairs than a barrier system. All cover systems should consider the goals of the cover in terms of protectiveness, including the pathways of risk from contained material, the lifecycle of the containment system. The containment system needs to be protective of direct contact of people and animals with the waste, prevent surface and groundwater water pollution, and minimize release of airborne contaminants. While most containment strategies have been based on the dry tomb strategy of keeping waste dry, there are some sites where adding or allowing moisture to help decompose organic waste is the current plan. ET covers may work well in places where complete exclusion of precipitation is not needed. The U.S. EPA Alternative Cover Assessment Program (ACAP), USDOE, the Nuclear Regulatory Commission, and others have researched ET cover design and efficacy, including the history of their use, general considerations in their design, performance, monitoring, cost, current status, limitations on their use, and project specific examples. An on-line database has been developed with information

  12. Landmine Detection Technology Research Programme at TNO

    NARCIS (Netherlands)

    Schleijpen, H.M.A.

    2003-01-01

    This presentation gives an overview of most of the activities on research and development in the technology area for landmine detection at TNO in the Netherlands. The projects cover the range from military applications to humanitarian demining. In the “conventional” detection systems area the

  13. The Influence of Different Technologies of Soil Processing on Infiltration Properties of Soil in the Cambisols Area of the Opava District

    Directory of Open Access Journals (Sweden)

    Miroslav Dumbrovský

    2016-01-01

    Full Text Available The subject of the contribution is the evaluation of the influence of the conventional tillage and reduced tillage technology of soil processing on the infiltration properties of the soil in the Větřkovice area. Field experimental work at the area was carried out in the years 2013–2015 on Cambisol district medium-heavy clayey soil. The research was conducted on sloping erosion-endangered blocks of arable land sown with spring barley. The areas were chosen each year in the way that one of the experimental areas was handled by conventional tillage technologies and the other by reduced tillage technologies. Intact soil samples were taken into Kopecký’s cylinders in the three landscape positions, at a depth of 10 cm (representing topsoil and 30 cm (representing subsoil. The cumulative infiltration was measured using a mini-disc infiltrometer near the consumption points. The Zhang method (1997, which provides an estimate of the unsaturated hydraulic conductivity K(h, was used for the evaluation of the infiltration tests of the mini-disc infiltrometer. The soil profile processed by conventional tillage showed a higher degree of compaction. The bulk density was between 1.10–1.67 g.cm-3, compared to the land processed by the reduced tillage technology, where the values were between 0.80–1.29 g.cm-3. Unsaturated hydraulic conductivity values were about one‑third higher within the reduced tillage technology soil processing.

  14. Percent Wetland Cover

    Data.gov (United States)

    U.S. Environmental Protection Agency — Wetlands act as filters, removing or diminishing the amount of pollutants that enter surface water. Higher values for percent of wetland cover (WETLNDSPCT) may be...

  15. Percent of Impervious Cover

    Data.gov (United States)

    U.S. Environmental Protection Agency — High amounts of impervious cover (parking lots, rooftops, roads, etc.) can increase water runoff, which may directly enter surface water. Runoff from roads often...

  16. GAP Land Cover - Image

    Data.gov (United States)

    Minnesota Department of Natural Resources — This raster dataset is a simple image of the original detailed (1-acre minimum), hierarchically organized vegetation cover map produced by computer classification of...

  17. Percent Wetland Cover (Future)

    Data.gov (United States)

    U.S. Environmental Protection Agency — Wetlands act as filters, removing or diminishing the amount of pollutants that enter surface water. Higher values for percent of wetland cover (WETLNDSPCT) may be...

  18. Land cover change impact on urban flood modeling (case study: Upper Citarum watershed)

    Science.gov (United States)

    Siregar, R. I.

    2018-03-01

    The upper Citarum River watershed utilizes remote sensing technology in Geographic Information System to provide information on land coverage by interpretation of objects in the image. Rivers that pass through urban areas will cause flooding problems causing disadvantages, and it disrupts community activities in the urban area. Increased development in a city is related to an increase in the number of population growth that added by increasing quality and quantity of life necessities. Improved urban lifestyle changes have an impact on land cover. The impact in over time will be difficult to control. This study aims to analyze the condition of flooding in urban areas caused by upper Citarum watershed land-use change in 2001 with the land cover change in 2010. This modeling analyzes with the help of HEC-RAS to describe flooded inundation urban areas. Land cover change in upper Citarum watershed is not very significant; it based on the results of data processing of land cover has the difference of area that changed is not enormous. Land cover changes for the floods increased dramatically to a flow coefficient for 2001 is 0.65 and in 2010 at 0.69. In 2001, the inundation area about 105,468 hectares and it were about 92,289 hectares in 2010.

  19. Nuclear medicine technology study guide

    CERN Document Server

    Patel, Dee

    2011-01-01

    Nuclear Medicine Technology Study Guide presents a comprehensive review of nuclear medicine principles and concepts necessary for technologists to pass board examinations. The practice questions and content follow the guidelines of the Nuclear Medicine Technology Certification Board (NMTCB) and American Registry of Radiological Technologists (ARRT), allowing test takers to maximize their success in passing the examinations. The book is organized by sections of increasing difficulty, with over 600 multiple-choice questions covering all areas of nuclear medicine, including radiation safety; radi

  20. HTGR technology development: status and direction

    International Nuclear Information System (INIS)

    Kasten, P.R.

    1982-01-01

    During the last two years there has been an extensive and comprehensive effort expended primarily by General Atomic (GA) in generating a revised technology development plan. Oak Ridge National Laboratory (ORNL) has assisted in this effort, primarily through its interactions over the past years in working together with GA in technology development, but also through detailed review of the initial versions of the technology development plan as prepared by GA. The plan covers Fuel Technology, Materials Technology (including metals, graphite, and ceramics), Plant Technology (including methods, safety, structures, systems, heat exchangers, control and electrical, and mechanical), and Component Design Verification and Support areas

  1. Archaeological Investigations in the Gainesville Lake Area of the Tennessee-Tombigbee Waterway. Volume III. Gainesville Lake Area Lithics: Chronology, Technology and Use.

    Science.gov (United States)

    1981-01-01

    96 Benton Cluster ..... .................... 98 Morrow Mountain-White Springs Cluster ......... 98 Eva Cluster...technology differed from that of Miller II. Thermal alteration occurs on over 80 percent of the Hiller II lithic materials and over 90 percent of the...and Kneberg (1961) found 94 percent of the Benton types at the Eva site just above the Morrow Mountain V occupation in the lower levels of the Big

  2. Geomorphological processes in a semiarid badland area using new technologies: TLS, terrestrial and aerial SfM photogrammetry

    Science.gov (United States)

    Ferrer, Victor; Errea, Paz; Alonso, Esteban; Gómez-Gutiérrez, Álvaro; Nadal-Romero, Estela

    2017-04-01

    We used three different methods Terrestrial Laser Scanner (TLS), terrestrial Structure from Motion photogrammetry (SfM) and aerial SfM photogrammetry with an Unmanned Aerial Vehicle (UAV) to analyse geomorphological processes in a semiarid badland landscape. Los Aguarales badlands, located in the Ebro Depression (Spain), occur in the Holocene sediment accumulated in a wide valley infilled with silt and clay. The morphology of Los Aguarales badlands is complex, making the geomorphological interpretation a difficult task. Los Aguarales badlands are characterized by the sequence of incision and piping processes developing an abrupt and complex landscape. Three different representative and small study sites were selected to carry out a detailed analysis of the geomorphological processes. Moreover, the capability of the three methods to produce high resolution point clouds was evaluated. The obtained topographical changes were very low during the first 6 months (March-October 2016). Measured topographical changes, with TLS and terrestrial SfM, were very low, and these values fall within the range of the acquisition error of the devices used (2-6 cm). The preliminary results indicated the possibilities of a multiscale approach using new technologies to study geomorphological and erosion processes, although long-term studies will be necessary to obtain erosion rates in this semiarid badland area. Acknowledgement This research was supported by ESPAS and eTERA 3D projects (CGL2015- 65569-R and CGL2014-54822-R, funded by the MINECO-FEDER). Estela Nadal-Romero is the recipient of a Ramón y Cajal postdoctoral contract (Spanish Ministry of Economy and Competitiveness).

  3. [Information and Communication Technology in medicine in Italy: problems and perspectives. A document by the "e-cardio" area of the Italian Association of Hospital Cardiologists (ANMCO)].

    Science.gov (United States)

    Mantero, Antonio; Posteraro, Alfredo; Giordano, Guido; Tonti, Gianni; Pinciroli, Francesco

    2013-12-01

    In Italy, health protection is an individual right protected by the article 32 of the Constitution, granted to everyone since 1978 by the foundation of the National Health Service. However, regionalization of the healthcare system has caused noticeable discrepancies among the different areas of the country. The use of the Information and Communication Technology (ICT) may be useful to solve them. The purpose of this document is to analyze the implementation of ICT in Italy, on the basis of the suggestions given by the Italian Association of Hospital Cardiologists (ANMCO). In 2010, the Italian government introduced the electronic health record (EHR), which includes a minimum core of essential documents that should be created and updated by general practitioners. The obvious limitations of this methodology become clear in the urgency-emergency clinical setting, where the availability of particular clinical data may influence both patient prognosis and cost reduction. Also the privacy rules, currently very restrictive, cause a drawback in reliability of the data reported in the EHR, thus arising the need for a balance shift from privacy to health rights at the level of both the individual and the community. A minimum core of mandatory clinical data to be included in the EHR should be defined. No formal indications for filling out the medical records are available and most few experiences concern "bureaucratic documents" on the diagnostic and therapeutic process. Conversely, we believe that medical records should become a diagnostic and therapeutic tool that makes health rights uniform across the country. Each medical record form should include the following features: a simple interface, a mandatory association of clinical findings and reports, data portability and accessibility, and adherence of the information to a minimal dataset. Additionally, medical records data should merge into a modified EHR available at any time and place through network access points with

  4. Land Use Changes Monitoring with CORINE Land Cover Data

    Science.gov (United States)

    Cieślak, Iwona; Szuniewicz, Karol; Pawlewicz, Katarzyna; Czyża, Szymon

    2017-10-01

    The Corine Land Cover (CLC) data is a collection of information about land cover, which was created during the program that was implemented by the EU. In this article authors proposes new index of space fragmentation, which is based on the analysis of the length of the boundaries of the various forms of land use - Ex. This papers contains the procedure of designation the new index and two examples of its use for the two regions in the north – eastern part of Poland. These regions are characterized by a particularly high environmental values. Therefore, especially for these areas it is extremely important to study the fragmentation of landscapes as monitoring the increase of anthropopression. For visualization and spatial analysis authors used GIS technology.

  5. Fusion technology programme

    International Nuclear Information System (INIS)

    Finken, D.

    1984-04-01

    KfK participates to the Fusion Technology Programme of the European Community. Most of the work in progress addresses the Next European Torus (NET) and the long term technology aspects as defined in the 82/86 programme. A minor part serves to preparation of future contributions and to design studies on fusion concepts in a wider perspective. The Fusion Technology Programme of Euratom covers mainly aspects of nuclear engineering. Plasma engineering, heating, refueling and vacuum technology are at present part of the Physics Programme. In view of NET, integration of the different areas of work will be mandatory. KfK is therefore prepared to address technical aspects beyond the actual scope of the physics experiments. The technology tasks are reported project wise under title and code of the Euratom programme. Most of the projects described here are shared with other European fusion laboratories as indicated in the table annexed to this report. (orig./GG)

  6. Third Annual Clinical Diabetes Technology Meeting

    National Research Council Canada - National Science Library

    Klonoff, David D

    2007-01-01

    .... The attendance was 378 healthcare providers and scientists. The first day of the meeting covered Technologies for Diabetes Monitoring and the second day covered Technologies for Diabetes Therapy...

  7. Inkjet printing as a roll-to-roll compatible technology for the production of large area electronic devices on a pre-industrial scale

    NARCIS (Netherlands)

    Teunissen, P.; Rubingh, E.; Lammeren, T. van; Abbel, R.J.; Groen, P.

    2014-01-01

    Inkjet printing is a promising approach towards the solution processing of electronic devices on an industrial scale. Of particular interest is the production of high-end applications such as large area OLEDs on flexible substrates. Roll-to-roll (R2R) processing technologies involving inkjet

  8. Environmental measurement-while-drilling-gamma ray spectrometer (EMWD-GRS) system technology demonstration plan for use at the Savannah River Site F-Area Retention Basin

    Energy Technology Data Exchange (ETDEWEB)

    Williams, C.V.; Lockwood, G.J.; Normann, R.A. [Sandia National Labs., Albuquerque, NM (United States); Gruebel, R.D. [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    The Environmental Measurement-While-Drilling-Gamma Ray Spectrometer (EMWD-GRS) system represents an innovative blend of new and existing technology that provides the capability of producing real-time environmental and drillbit data during drilling operations. This demonstration plan presents information on the EMWD-GRS technology, demonstration design, Cs-137 contamination at the Savannah River Site F-Area Retention Basin, responsibilities of demonstration participants, and the policies and procedures for the demonstration to be conducted at the Savannah River Site F-Area Retention Basin. The EMWD-GRS technology demonstration will consist of continuously monitoring for gamma-radiation contamination while drilling two horizontal boreholes below the backfilled retention basin. These boreholes will pass near previously sampled vertical borehole locations where concentrations of contaminant levels are known. Contaminant levels continuously recorded by the EMWD-GRS system during drilling will be compared to contaminant levels previously determined through quantitative laboratory analysis of soil samples.

  9. Environmental measurement-while-drilling-gamma ray spectrometer (EMWD-GRS) system technology demonstration plan for use at the Savannah River Site F-Area Retention Basin

    International Nuclear Information System (INIS)

    Williams, C.V.; Lockwood, G.J.; Normann, R.A.; Gruebel, R.D.

    1996-08-01

    The Environmental Measurement-While-Drilling-Gamma Ray Spectrometer (EMWD-GRS) system represents an innovative blend of new and existing technology that provides the capability of producing real-time environmental and drillbit data during drilling operations. This demonstration plan presents information on the EMWD-GRS technology, demonstration design, Cs-137 contamination at the Savannah River Site F-Area Retention Basin, responsibilities of demonstration participants, and the policies and procedures for the demonstration to be conducted at the Savannah River Site F-Area Retention Basin. The EMWD-GRS technology demonstration will consist of continuously monitoring for gamma-radiation contamination while drilling two horizontal boreholes below the backfilled retention basin. These boreholes will pass near previously sampled vertical borehole locations where concentrations of contaminant levels are known. Contaminant levels continuously recorded by the EMWD-GRS system during drilling will be compared to contaminant levels previously determined through quantitative laboratory analysis of soil samples

  10. Effects of legume cover crop and sub-soiling on soil properties and Maize (Zea mays L) growth in semi arid area of Machakos district, Kenya = Efecto del cultivo de cobertua y el subsolado sobre las propiedades del suelo y crecimiento de maiz (Zea mays L.) en la region semi arida de Machakos, Kenia

    NARCIS (Netherlands)

    Karuma, A.; Gachene, C.K.K.; Gicheru, P.; Mwangombe, A.W.; Mwangi, H.W.; Clavel, D.; Verhagen, A.; Kaufmann, Von R.; Francis, J.; Ekaya, W.

    2011-01-01

    Low crop yields in the semi arid areas of Kenya have been attributed to, among other factors, low soil fertility, low farm inputs, labour constraints and inappropriate tillage practices that lead to pulverized soils. The aim of this study was to determine the effects of legume cover crops (LCC) on

  11. Climate under cover

    CERN Document Server

    Takakura, Tadashi

    2002-01-01

    1.1. INTRODUCTION Plastic covering, either framed or floating, is now used worldwide to protect crops from unfavorable growing conditions, such as severe weather and insects and birds. Protected cultivation in the broad sense, including mulching, has been widely spread by the innovation of plastic films. Paper, straw, and glass were the main materials used before the era of plastics. Utilization of plastics in agriculture started in the developed countries and is now spreading to the developing countries. Early utilization of plastic was in cold regions, and plastic was mainly used for protection from the cold. Now plastic is used also for protection from wind, insects and diseases. The use of covering techniques started with a simple system such as mulching, then row covers and small tunnels were developed, and finally plastic houses. Floating mulch was an exception to this sequence: it was introduced rather recently, although it is a simple structure. New development of functional and inexpensive films trig...

  12. Technology for the oil spills clean-up which provides preliminary accumulation of sorbents into the area of emergence and localization oil spills

    Directory of Open Access Journals (Sweden)

    M.L.Soroka

    2012-12-01

    Full Text Available Introduction: The implementation of measures for the prevention and spill of dangerous goods is an important aspect of sustainable development of railway transport. oil spills accident are the most dangerous. They are accompanied by significant pollution of all environmental objects. Studying and development of oil localization and clean-up technologies of such accidents is an important problem of environmental protection to modern conditions of railway transport development. The purpose: to improve the effectiveness of traditional methods of oil spill elimination and the development of new clean-up technologies adapted to the real conditions of the railway transport of Ukraine. Methods: To achieve the research purposes was used analysis of material flows, typical for places emergence and localization of the oil spill on the railways. Results: Analysis of standard technological scheme for the oil spills eliminations has shown that the most difficult task of effective clean-up surfaces is the timely delivery of oil sorbents and special equipment to the area spill containment. The general effectiveness of the elimination activities specifies the time from the beginning contact of dangerous goods with environmental objects to the absorption it into the structure of sorbent . Us was developed the technological scheme of oil spill elimination. This scheme provide a permanent and fast access to the sorbents into the oil spill localization area. It was proposed to device that allows you to transport the sorbent into sorption booms directly on the tank for transportation of petroleum products. Conclusions: Preventative accumulation of sorbents to the oil spill elimination into the localization area provides the organizational and operational simplicity of all stages of clean-up technology. Technical and economic assessment shows that the proposed technology is effective, technologically feasible and economically competitive.

  13. Barriers to the use of Information and Communication Technology by occupational therapists working in a rural area of New South Wales, Australia.

    Science.gov (United States)

    Chedid, Rebecca Jean; Dew, Angela; Veitch, Craig

    2013-06-01

    This qualitative study formed part of a large-scale, multi-phase study into the delivery of therapy services to people with a disability, living in one rural area of New South Wales, Australia. The study's purpose was to identify the impact of Information and Communication Technology on the workforce practices of occupational therapists' working in a rural area of New South Wales. Individual semi-structured telephone interviews were conducted with 13 occupational therapists working in disability, health and private practice in a rural area of New South Wales. Participants were asked about access to, skills and limitations of using Information and Communication Technology. A modified grounded theory approach, based on thematic analysis and constant comparison, was used to analyse the interview transcripts. This study found widespread use of technology by rurally based occupational therapists working in the disability sector in New South Wales. However, Information and Communication Technology was primarily used for client contact, professional development and professional networking rather than therapy provision. The study identified individual, workplace and community barriers to greater uptake of Information and Communication Technology by this group. The individual barriers included: age cohort, knowledge and personal preferences. The workplace barriers included: support and training and availability of resources. The community barriers included: infrastructure and perceptions of clients' acceptance. The potential exists for Information and Communication Technology to supplement face-to-face therapy provision, enhance access to professional development and reduce professional isolation thereby addressing the rural challenges of large distances, travel times and geographic isolation. To overcome these challenges, individual, workplace and community Information and Communication Technology barriers should be addressed concurrently. © 2012 The Authors Australian

  14. SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM Evaluation of Soil Amendment Technologies at the Crooksville/RosevillePottery Area of Concern Rocky Mountain Remediation ServicesEnvirobond™ Process

    Science.gov (United States)

    RMRS developed the Envirobond™ process to treat heavy metals in soil.This phosphate-based technology consists of a proprietary powder and solution that binds with metals in contaminated waste. RMRS claims that the Envirobond™ process converts metal contaminants from their leach...

  15. Normalized difference vegetation index (ndvi) analysis for land cover types using landsat 8 oli in besitang watershed, Indonesia

    Science.gov (United States)

    Zaitunah, A.; Samsuri; Ahmad, A. G.; Safitri, R. A.

    2018-03-01

    Watershed is an ecosystem area confined by topography and has function as a catcher, storage, and supplier of water, sediments, pollutants and nutrients in the river system and exit through a single outlet. Various activities around watershed areas of Besitang have changed the land cover and vegetation index (NDVI) that exist in the region. In order to detect changes in land cover and NDVI quickly and accurately, we used remote sensing technology and geographic information systems (GIS). The study aimed to assess changes in land cover and vegetation density (NDVI) between 2005 and 2015, as well as obtaining the density of vegetation (NDVI) on each of the land cover of 2005 and 2015. The research showed the extensive of forest area of 949.65 Ha and a decline of mangrove forest area covering an area of 2,884.06 Ha. The highest vegetation density reduced 39,714.58 Ha, and rather dense increased 24,410.72 Ha between 2005 and 2015. The land cover that have the highest NDVI value range with very dense vegetation density class is the primary dry forest (0.804 to 0.876), followed by secondary dry forest (0.737 to 0.804) for 2015. In 2015 the land cover has NDVI value range the primary dry forest (0.513 to 0.57), then secondary dry forest (0.456 to 0.513) with dense vegetation density class

  16. RLC Forest Cover of the Former Soviet Union, 1973

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: This data set is a 1:15 million scale forest cover map for the land area of the Former Soviet Union. Twenty-two land cover classes are distinguished, of...

  17. RLC Forest Cover of the Former Soviet Union, 1973

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set is a 1:15 million scale forest cover map for the land area of the Former Soviet Union. Twenty-two land cover classes are distinguished, of which 20 are...

  18. Res Cover Oct 07

    Indian Academy of Sciences (India)

    Tender parts of the plant are covered with rusty brown star-shaped hairs. Petals are hooded with bifurcated appendages. Stamens are ten of which five are fertile and the rest sterile. They are fused into a hollow cup-like structure. Fruit is dry, indehiscent and is hard and dark when ripe. Bark is used in treating skin diseases ...

  19. The Library of Congress, Dewey Decimal, and Universal Decimal Classification Systems are Incomplete and Unsystematic. A Review of: Zins, C., & Santos, P. L. V. A. C. (2011. Mapping the knowledge covered by library classification systems. Journal of the American Society for Information Science and Technology, 62(5, 877-901. doi:10.1002/asi.21481

    Directory of Open Access Journals (Sweden)

    Cari Merkley

    2011-01-01

    . This means that there was at least one class or subclass in each of the three systems that corresponded to the subclasses in these pillars. The remaining seven pillars were only partially covered by the three systems to varying degrees. For example, the coverage of religion in LCC and DDC show evidence of a bias towards Christianity and incomplete coverage of other faiths. In addition to the lack of completeness in terms of subject coverage, the researchers found inconsistencies and problems with how relationships between subjects were illustrated by the systems. For example, botany should be a subclass of biology, but the subjects occupy the same level in the LCC, DDC, and UDC systems. Researchers also noted cases where subclasses on the same level were not mutually exclusive e.g., the BR (Christianity and BS (The Bible subclasses in LCC. Overall, LLC performed slightly better than DDC or UDC, covering 47 of the 55 unique subject categories in the 10 Pillars. It was followed by UDC with 44 out of 55, and DDC with 43 out of 55. Some of the 55 unique subject categories in the 10 Pillars system were not represented by any of the systems: 3 subclasses under Society (Society at Large – Area Based, Social Groups – Age, and Social Groups – Ethnicity, 2 under Technology (Technologies – Materials and Technologies – Processes, and 1 under Foundations (Methodology.Conclusion – The researchers conclude that none of the three major classification systems analyzed provides complete and systematic coverage of the world of knowledge, and call for the library community to move to new systems, such as the 10 Pillars of Knowledge.

  20. Energy area: final report of consul tory in a National Strategic plan in Science, Technology and Innovation framework

    International Nuclear Information System (INIS)

    Mendez Galain, R.

    2008-02-01

    This book is about following topics: access of primary sources, useful in a technological way, efficient use, environment, social incidence in Uruguay, Prospective studies by sectors,and Energetic matrix.

  1. Utilizing Multiple Datasets for Snow Cover Mapping

    Science.gov (United States)

    Tait, Andrew B.; Hall, Dorothy K.; Foster, James L.; Armstrong, Richard L.

    1999-01-01

    Snow-cover maps generated from surface data are based on direct measurements, however they are prone to interpolation errors where climate stations are sparsely distributed. Snow cover is clearly discernable using satellite-attained optical data because of the high albedo of snow, yet the surface is often obscured by cloud cover. Passive microwave (PM) data is unaffected by clouds, however, the snow-cover signature is significantly affected by melting snow and the microwaves may be transparent to thin snow (less than 3cm). Both optical and microwave sensors have problems discerning snow beneath forest canopies. This paper describes a method that combines ground and satellite data to produce a Multiple-Dataset Snow-Cover Product (MDSCP). Comparisons with current snow-cover products show that the MDSCP draws together the advantages of each of its component products while minimizing their potential errors. Improved estimates of the snow-covered area are derived through the addition of two snow-cover classes ("thin or patchy" and "high elevation" snow cover) and from the analysis of the climate station data within each class. The compatibility of this method for use with Moderate Resolution Imaging Spectroradiometer (MODIS) data, which will be available in 2000, is also discussed. With the assimilation of these data, the resolution of the MDSCP would be improved both spatially and temporally and the analysis would become completely automated.

  2. Suitability assessment of building energy saving technologies for office buildings in cold areas of China based on an assessment framework

    International Nuclear Information System (INIS)

    Geng, Geng; Wang, Zhaoxia; Zhao, Jing; Zhu, Neng

    2015-01-01

    Highlights: • An assessment method considering economy, environment and technology is proposed. • Office buildings are classified into 3 types and weights are calculated respectively. • BESTs were summed up as 3 suitability levels. • Recommendations are proposed for adopting in design stage. - Abstract: Blind application and extensive copy of building energy saving technologies have been found very common through investigation in China. Emphases should be put on the suitability assessment when selecting and optimizing building energy saving technologies. This paper created an assessment method, namely an assessment framework to assess the suitability level of building energy saving technologies from a holistic point of view. Fuzzy analytic hierarchy process was adopted. 3 factors and 8 sub-factors were included in the framework. The office buildings were classified into 3 types to calculate weights of factors and sub-factors. The assessment framework was established for each type of office buildings. 20 energy saving technologies from surveyed cases was selected as case study. Ranks of suitability level of the assessment objects were obtained for each type of office buildings. The assessment results could be referred when selecting building energy saving technologies in the design stage

  3. USING PERFLUOROCARBON TRACERS FOR VERIFICATION OF CAP AND COVER SYSTEMS PERFORMANCE.

    Energy Technology Data Exchange (ETDEWEB)

    HEISER,J.; SULLIVAN,T.

    2001-11-01

    The Department of Energy (DOE) Environmental Management (EM) office has committed itself to an accelerated cleanup of its national facilities. The goal is to have much of the DOE legacy waste sites remediated by 2006. This includes closure of several sites (e.g., Rocky Flats and Fernald). With the increased focus on accelerated cleanup, there has been considerable concern about long-term stewardship issues in general, and verification and long-term monitoring (LTM) of caps and covers, in particular. Cap and cover systems (covers) are vital remedial options that will be extensively used in meeting these 2006 cleanup goals. Every buried waste site within the DOE complex will require some form of cover system. These covers are expected to last from 100 to 1000 years or more. The stakeholders can be expected to focus on system durability and sustained performance. DOE EM has set up a national committee of experts to develop a long-term capping (LTC) guidance document. Covers are subject to subsidence, erosion, desiccation, animal intrusion, plant root infiltration, etc., all of which will affect the overall performance of the cover. Very little is available in terms of long-term monitoring other than downstream groundwater or surface water monitoring. By its very nature, this can only indicate that failure of the cover system has already occurred and contaminants have been transported away from the site. This is unacceptable. Methods that indicate early cover failure (prior to contaminant release) or predict approaching cover failure are needed. The LTC committee has identified predictive monitoring technologies as a high priority need for DOE, both for new covers as well as existing covers. The same committee identified a Brookhaven National Laboratory (BNL) technology as one approach that may be capable of meeting the requirements for LTM. The Environmental Research and Technology Division (ERTD) at BNL developed a novel methodology for verifying and monitoring

  4. International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Pre-survey in Europe; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Jizen chosa (Oshu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This survey in Europe surveyed the current status of the coal industry, supporting directions and policies of governments on the coal industry, and summarized the information thereof. The survey included movements in policies and activities in transfer of technologies to overseas countries by governments and corporations of different countries, and the current status of the coal technology training project. The survey covered Britain and Germany. The British coal industry is facing a serious difficulty because the electric power industry being the major coal purchaser has changes its sourcing to natural gas. In addition, the open-cut mining which has been considered high in productivity has no further hope of big progress due to regulations in the environmental aspects. However, as a result of having performed positively research and development on production cost reduction, the production efficiency has grown excellently. Using this situation as the base, positive advancement into overseas countries is being carried out. The German coal industry has, in spite of having reduced the production size and the number of coal mines, shifted coal purchasers to electric power generation and steel making areas, and its quality and supply capability stand equivalent to those of imported coals. (NEDO)

  5. Decision support system to select cover systems

    International Nuclear Information System (INIS)

    Bostick, K.V.

    1995-01-01

    The objective of this technology is to provide risk managers with a defensible, objective way to select capping alternatives for remediating radioactive and mixed waste landfills. The process of selecting containment cover technologies for mixed waste landfills requires consideration of many complex and interrelated technical, regulatory, and economic issues. A Decision Support System (DSS) is needed to integrate the knowledge of experts from scientific, engineering, and management disciplines to help in selecting the best capping practice for the site

  6. International Conference on Mechanical Engineering and Technology

    CERN Document Server

    Mechanical Engineering and Technology

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011.   Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings.   This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation...

  7. The Thermal Collector With Varied Glass Covers

    International Nuclear Information System (INIS)

    Luminosu, I.; Pop, N.

    2010-01-01

    The thermal collector with varied glass covers represents an innovation realized in order to build a collector able to reach the desired temperature by collecting the solar radiation from the smallest surface, with the highest efficiency. In the case of the thermal collector with variable cover glasses, the number of the glass plates covering the absorber increases together with the length of the circulation pipe for the working fluid. The thermal collector with varied glass covers compared to the conventional collector better meet user requirements because: for the same temperature increase, has the collecting area smaller; for the same collection area, realizes the highest temperature increase and has the highest efficiency. This works is addressed to researchers in the solar energy and to engineers responsible with air-conditioning systems design or industrial and agricultural products drying.

  8. Remediation Technology of Contaminated Areas with Organochlorines: A Preliminary Evaluation Seeking Potential Applications on the Site of Street Capua, Santo André - SP

    Directory of Open Access Journals (Sweden)

    Mauro Silva Ruiz

    2012-12-01

    Full Text Available This paper is aimed to analyze the use of remediation technologies for areas contaminated with organochlorine based on a literature review and discussions with specialists. The remediation technologies analyzed were bioremediation, phytoremediation, nanotechnology, chemical oxidation, and thermal desorption. The purpose is to identify and compare “key problems” for each of these technologies envisaging the use of one or more of these them f or the remediation of the Capua Street site in Santo André, SP. Four databases were used in the preliminary literature review: Scopus, SciELO, Web of Science, and Science Direct. A survey questionnaire was designed to gather information on publications of scientific papers and patents, specific uses of these technologies by companies, and cases of application. Since the quality of the data and information obtained from this questionnaire application was not satisfactory, a new research approach for complementing them was undertaken. For this purpose, the Web of Science was selected as the most adequate data basis to carry out this second survey. However, it was realized that even for this database - that is reference for evaluating academic institutions, researchers and maturity of technologies – bias coming from the original data source can affect the survey results. Moreover, as the number of keywords used in the research consisted of generic terms for each technology, it can also be assumed that if some authors have used very specific terms, a small amount of work published by them would possibly have been misrepresented in the final result.

  9. Adaption of Cognitive Radio technology to low-cost and low-power wireless Personal Area Network devices

    DEFF Research Database (Denmark)

    Rohde, John; Toftegaard, Thomas Skjødeberg

    2011-01-01

    of the license-free frequency bands, where the level of interference can be extremely high. Combined with the challenges associated with multi-path propagation and attenuation, setting up and maintaining an acceptable level of perceived QoS is a challenging job even for trained professionals. This paper...... discusses the challenges associated with the implementation of highly reliable low-power WPAN networks for the future and the adaption of Cognitive Radio technology as a potential solution. A brief status on the maturity of CR technology will be presented as an integral part of this discussion....

  10. Handbook of digital games and entertainment technologies

    CERN Document Server

    Rauterberg, Matthias; Ciancarini, Paolo

    2017-01-01

    The topics treated in this handbook cover all areas of games and entertainment technologies, such as digital entertainment; technology, design/art, and sociology. The handbook consists of contributions from top class scholars and researchers from the interdisciplinary topic areas.  The aim of this handbook is to serving as a key reference work in the field and provides readers with a holistic picture of this interdisciplinary field covering technical issues, aesthetic/design issues, and sociological issues. At present, there is no reference work in the field that provides such a broad and complete picture of the field. Engineers and researchers who want to learn about this emerging area will be able to find adequate answers regarding technology issues on digital entertainment. Designers and artists can learn how their skills and expertise can contribute to this emerging area. Also researchers working in the field of sociology and psychology will find how their experience and knowledge are connected to other ...

  11. Proceedings of the Twelfth International Symposium on Space Terahertz Technology

    Science.gov (United States)

    Mehdi, Imran (Editor)

    2001-01-01

    The Twelfth International Symposium on Space Terahertz Technology was held February 14-16, 2001 in San Diego, California, USA. This symposium was jointly sponsored by the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory, California Institute of Technology. The symposium featured sixty nine presentations covering a wide variety of technical topics relevant to Terahertz Technology. The presentations can be divided into five broad technology areas: Hot Electron Bolometers, superconductor insulator superconductor (SIS) technology, local oscillator (LO) technology, Antennas and Measurements, and Direct Detectors. The symposium provides scientists, engineers, and researchers working in the terahertz technology and science fields to engineers their work and exchange ideas with colleagues.

  12. 911 Call Center (PSAP) Service Areas, Master coverage of "atom" features used as a source to generate several derivative layers for the Sheriff RMS and E-911 map rolls. Cover is painstakingly maintained interactively by GIS staff. All atom boundaries are snapped to the road centerline cover, Published in 2008, 1:1200 (1in=100ft) scale, Sedgwick County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — 911 Call Center (PSAP) Service Areas dataset current as of 2008. Master coverage of "atom" features used as a source to generate several derivative layers for the...

  13. Using Remote Sensing Technology on the Delimitation of the Conservation Area for the Jianan Irrigation System Cultural Landsccape

    Directory of Open Access Journals (Sweden)

    C. H. Wang

    2015-08-01

    Full Text Available In recent years the cultural landscape has become an important issue for cultural heritages throughout the world. It represents the "combined works of nature and of man" designated in Article 1 of the World Heritage Convention. When a landscape has a cultural heritage value, important features should be marked and mapped through the delimitation of a conservation area, which may be essential for further conservation work. However, a cultural landscape’s spatial area is usually wider than the ordinary architectural type of cultural heritage, since various elements and impact factors, forming the cultural landscape’s character, lie within a wide geographic area. It is argued that the conservation of a cultural landscape may be influenced by the delimitation of the conservation area, the corresponding land management measures, the limits and encouragements. The Jianan Irrigation System, an historical cultural landscape in southern Taiwan, was registered as a living cultural heritage site in 2009. However, the system’s conservation should not be limited to just only the reservoir or canals, but expanded to irrigated areas where farmland may be the most relevant. Through the analysis process, only approximately 42,000 hectares was defined as a conservation area, but closely related to agricultural plantations and irrigated by the system. This is only half of the 1977 irrigated area due to urban sprawl and continuous industrial expansion.

  14. Scenarios of land cover in China

    Science.gov (United States)

    Yue, Tian Xiang; Fan, Ze Meng; Liu, Ji Yuan

    2007-02-01

    A method for surface modeling of land cover change (SMLC) is developed on the basis of establishing transition probability matrixes between land cover types and HLZ types. SMLC is used to simulate land cover scenarios of China for the years 2039, 2069 and 2099, for which HLZ scenarios are first simulated in terms of HadCM3 climatic scenarios that are downscaled in zonal model of spatial climate change in China. This paper also analyzes spatial distribution of land cover types, area change and mean center shift of each land cover type, ecotope diversity, and patch connectivity under the land cover scenarios. The results show that cultivated land would decrease and woodland would expand greatly with climatic change, which coincides with consequences expected by implementation of Grain-for-Green policy. Nival area would shrink, and desertification area would expand at a comparatively slow rate in future 100 years. Climate change would generally cause less ecotope diversity and more patch connectivity. Ecosystems in China would have a pattern of beneficial cycle after efficient ecological conservation and restoration. However, if human activities would exceed regulation capacity of ecosystems themselves, the ecosystems in China might deteriorate more seriously.

  15. ADOPTION OF RENEWABLE ENERGY TECHNOLOGIES (RET) IN TOURISM INDUSTRY- (A CASE OF OSOGBO AND OLORUNDA LOCAL GOVERNMENT AREAS IN OSUN STATE, NIGERIA)

    OpenAIRE

    Sonubi, O.K.; Ogunjimi, A. A.; Adeyemo, A. I.

    2017-01-01

    Hotel accommodation in Nigeria is comparatively more expensive than its neighbours in the sub region of West Africa. It is one of the most expensive globally. This is attributable to its operating environment. Any sustainable means of reducing running costs would be most welcome. A study on adoption of renewable energy technologies (RET) was conducted in Osogbo and Olorunda Local Government Areas of Osun State, Nigeria. Data were obtained from registered hotels in the two local government are...

  16. Oak Ridge National Laboratory Technology Logic Diagram. Executive Summary

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-30

    This executive summary contains a description of the logic diagram format; some examples from the diagram (Vol. 2) and associated technology evaluation data sheets (Vol. 3); a complete (albeit condensed) listing of the RA, D&D, and WM problems at ORNL; and a complete listing of the technology rankings for all the areas covered by the diagram.

  17. Manned maneuvering unit technology survey

    Science.gov (United States)

    Cook, G. V. O. (Editor)

    1975-01-01

    The preliminary design of the manned maneuvering unit (MMU) for the shuttle is investigated, and the current state of the art in certain technology areas that may find application on the operational EVA shuttle MMU is examined. Three broad areas of technology, namely: (1) mechanical energy storage - i.e., the practicality of utilizing the energy storage capability of either a reaction wheel or a control moment gyro, (2) numerical and alphanumerical displays, and (3) recent electronics developments such as microprocessors and integrated injection logic, were covered.

  18. National Coral Reef Monitoring Program: Benthic Cover Derived from Analysis of Benthic Images Collected during Stratified Random Surveys (StRS) across the Pacific Remote Island Areas from 2015-01-26 to 2015-04-28 (NCEI Accession 0159165)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data described here result from benthic photo-quadrat surveys conducted along transects at stratified random sites across the Pacific Remote Island Areas since...

  19. Covering tree with stars

    DEFF Research Database (Denmark)

    Baumbach, Jan; Guo, Jian-Ying; Ibragimov, Rashid

    2013-01-01

    We study the tree edit distance problem with edge deletions and edge insertions as edit operations. We reformulate a special case of this problem as Covering Tree with Stars (CTS): given a tree T and a set of stars, can we connect the stars in by adding edges between them such that the resulting...... tree is isomorphic to T? We prove that in the general setting, CST is NP-complete, which implies that the tree edit distance considered here is also NP-hard, even when both input trees having diameters bounded by 10. We also show that, when the number of distinct stars is bounded by a constant k, CTS...

  20. Covering tree with stars

    DEFF Research Database (Denmark)

    Baumbach, Jan; Guo, Jiong; Ibragimov, Rashid

    2015-01-01

    We study the tree edit distance problem with edge deletions and edge insertions as edit operations. We reformulate a special case of this problem as Covering Tree with Stars (CTS): given a tree T and a set of stars, can we connect the stars in by adding edges between them such that the resulting...... tree is isomorphic to T? We prove that in the general setting, CST is NP-complete, which implies that the tree edit distance considered here is also NP-hard, even when both input trees having diameters bounded by 10. We also show that, when the number of distinct stars is bounded by a constant k, CTS...