WorldWideScience

Sample records for technical working group

  1. INMM Physical Protection Technical Working Group Workshops

    International Nuclear Information System (INIS)

    Williams, J.D.

    1982-01-01

    The Institute of Nuclear Materials Management (INMM) established the Physical Protection Technical Working Group to be a focal point for INMM activities related to the physical protection of nuclear materials and facilities. The Technical Working Group has sponsored workshops with major emphasis on intrusion detection systems, entry control systems, and security personnel training. The format for these workshops has consisted of a series of small informal group discussions on specific subject matter which allows direct participation by the attendees and the exchange of ideas, experiences, and insights. This paper will introduce the reader to the activities of the Physical Protection Technical Working Group, to identify the workshops which have been held, and to serve as an introduction to the following three papers of this session

  2. International Technical Working Group Round Robin Tests

    Energy Technology Data Exchange (ETDEWEB)

    Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

    2003-02-01

    The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases.

  3. International Technical Working Group Round Robin Tests

    International Nuclear Information System (INIS)

    Dudder, Gordon B.; Hanlen, Richard C.; Herbillion, Georges M.

    2003-01-01

    The goal of nuclear forensics is to develop a preferred approach to support illicit trafficking investigations. This approach must be widely understood and accepted as credible. The principal objectives of the Round Robin Tests are to prioritize forensic techniques and methods, evaluate attribution capabilities, and examine the utility of database. The HEU (Highly Enriched Uranium) Round Robin, and previous Plutonium Round Robin, have made tremendous contributions to fulfilling these goals through a collaborative learning experience that resulted from the outstanding efforts of the nine participating internal laboratories. A prioritized list of techniques and methods has been developed based on this exercise. Current work is focused on the extent to which the techniques and methods can be generalized. The HEU Round Robin demonstrated a rather high level of capability to determine the important characteristics of the materials and processes using analytical methods. When this capability is combined with the appropriate knowledge/database, it results in a significant capability to attribute the source of the materials to a specific process or facility. A number of shortfalls were also identified in the current capabilities including procedures for non-nuclear forensics and the lack of a comprehensive network of data/knowledge bases. The results of the Round Robin will be used to develop guidelines or a ''recommended protocol'' to be made available to the interested authorities and countries to use in real cases

  4. International Technical Working Group Cooperation to Counter Illicit Nuclear Trafficking

    International Nuclear Information System (INIS)

    Smith, D K; Niemeyer, S

    2004-01-01

    The Nuclear Smuggling International Technical Working Group (ITWG) is an international body of nuclear forensic experts that cooperate to deter the illicit trafficking of nuclear materials. The objective of the ITWG is to provide a common approach and effective technical solutions to governments who request assistance in nuclear forensics. The ITWG was chartered in 1996 and since that time more than 28 nations and organizations have participated in 9 international meetings and 2 analytical round-robin trials. Soon after its founding the ITWG adopted a general framework to guide nuclear forensics investigations that includes recommendations for nuclear crime scene security and analysis, the best application of radioanalytical methods, the conduct of traditional forensic analysis of contaminated materials, and effective data analysis to interpret the history of seized nuclear materials. This approach has been adopted by many nations as they respond to incidents of illicit nuclear trafficking

  5. Presentation of the G-24 technical working group on training

    International Nuclear Information System (INIS)

    Haber, S.

    1993-01-01

    The Technical Working Group on Training (TWG-T) was created during the Plenary Session of September 1992 in order to inform the Members on ongoing activities in the Nuclear Training field, define redundancies and gaps of the ''Assistance Programs'', and propose efficient ways to progress. Training was recognized as one major activity through which operational safety can be very effectively and quite quickly improved and therefore the Plenary Session unanimously decided to launch a TWG on the subject. The present report is issued one year after the creation of the TWG. It summarizes the major steps of the activities and presents the relevant results. It also contains copies of documents on training infrastructures and requirements, provided by the recipient countries during the course of the work

  6. International technical working group cooperation to counter illicit nuclear trafficking

    International Nuclear Information System (INIS)

    Smith, D.K.; Niemeyer, S.

    2004-01-01

    The Nuclear Smuggling International Technical Working Group (ITWG) is an international group of nuclear forensic experts that cooperate to deter the illicit trafficking of nuclear materials. The objective of the ITWG is to provide a common approach and effective technical solutions to governments who request assistance in nuclear forensics. The ITWG was chartered in 1996 and since that time more than 28 nations and organizations have participated in 9 international meetings and 2 analytical round-robin trials. Soon after its founding the ITWG adopted a general framework to guide nuclear forensics investigations that includes recommendations for nuclear crime scene security and analysis, the best application of radioanalytical methods, the conduct of traditional forensic analysis of contaminated materials, and effective data analysis to interpret the history of seized nuclear materials. This approach has been adopted by many nations as they respond to incidents of illicit nuclear trafficking. ITWG members include policy and decision makers, law enforcement personnel, and scientists with expertise in, and responsibility for, nuclear forensics. (author)

  7. International technical working group cooperation to counter illicit nuclear trafficking

    International Nuclear Information System (INIS)

    Smith, D.K.

    2004-01-01

    Full text: The Nuclear Smuggling International Technical Working Group (ITWG) is an international group of nuclear forensic experts that cooperate to deter the illicit trafficking of nuclear materials. The objective of the ITWG is to provide a common approach and effective technical solutions to governments who request assistance in nuclear forensics. The ITWG was chartered in 1996 and since that time more than 28 nations and organizations have participated in 9 international meetings and 2 analytical round-robin trials. Soon after its founding the ITWG adopted a general framework to guide nuclear forensics investigations that includes recommendations for nuclear crime scene security and analysis, the best application of radioanalytical methods, the conduct of traditional forensic analysis of contaminated materials, and effective data analysis to interpret the history of seized nuclear materials. This approach has been adopted by many nations as they respond to incidents of illicit nuclear trafficking. ITWG members include policy and decision makers, law enforcement personnel, and scientists with expertise in, and responsibility for, nuclear forensics. It remains an association of active practitioners of nuclear forensics underwritten by funding from sponsoring countries and organizations. While the primary mission of the ITWG continues to be advancing the science and techniques of nuclear forensics and sharing technical and information resources to combat nuclear trafficking, recently the ITWG has focused on improvements to its organization and outreach. Central is the establishment of guidelines for best practices in nuclear forensics, conducting international exercises, promoting research and development, communicating with external organizations, providing a point-of-contact for nuclear forensics assistance, and providing mutual assistance in nuclear forensics investigations. By its very nature nuclear trafficking is a transboundary problem; nuclear materials

  8. Technical Working Group on Fast Reactors: German Report

    International Nuclear Information System (INIS)

    Maschek, W.

    2012-01-01

    General German situation: • After Fukushima decision to phase out definitely until 2022; • Currently only 9 reactors left (2 BWRs and 7 PWRs); • Start of new search for final repository all over Germany (salt, clay); • Discussion on retrievable repository; • Search for methods to reduce risk from waste repositories. Future prospects: • Continuation of work within EU programs; • Continuation of work within international organizations (IAEA, NEA-OECD); • New CRP‘s are of interest; • Education and training; • Focus on safety: prevention and mitigation; • Embedded in work on transmutation and waste treatment; • Cycle studies to demonstrate both sustainability potential and waste burning capability (reduced loads for final repositories) of FR

  9. Technical Working Group on Career and Technical Education Meeting. Meeting Summary (Washington, DC, September 22, 2017)

    Science.gov (United States)

    Ahn, Judie

    2017-01-01

    On September 22, 2017, the National Center for Special Education Research (NCSER) and the National Center for Education Research (NCER) at the Institute of Education Sciences (IES) convened a group of experts in policy, practice, and research related to Career and Technical Education (CTE). The goal of the meeting was to seek input from…

  10. Report of working group for technical standard of cutting and melting works in Glovebox dismantling

    International Nuclear Information System (INIS)

    Asazuma, Shinichiroh; Takeda, Shinsoh; Tajima, Shoichi

    2004-11-01

    In order to prevent spread of contamination, glovebox dismantling activity is usually performed in a confined enclosure with personal radioactive protective equipment. Since large potion of these materials is made of vinyl acetate, there exist potential risks of fire, damage and injury to the environment and workers during the dismantling (cutting or melting) operation. It is therefore important to establish standard for proper use of equipment and hazard controls in such a specific environment. Working Group composed of Tokai Works and Oarai Works has examined and developed the operational standard for cutting work in glovebox dismantlement. The result is reflected to the Tokai Works Safety Operational Standard. (author)

  11. THE TECHNICAL AND ETHNICAL DIVISION OF WORK, THE INDIGEOUS GROUPS AND THE FAMILY BUSINESSES

    OpenAIRE

    Gloria A. Miranda-Zambrano; Ricardo Contreras-Soto; Alejandra López-Salazar

    2013-01-01

    The work exposes some forms of indigenous groups participation on entrepreneurial family businesses, mainly in the region of Laja - Bajío where the family plays an important role in these organizations. The work point out the approach on technical ethnic division of labour to locate such actors in labour circuits, in economic activities or guilds that have been built in various social processes. To analyze the ways in which they operate, the role of the family, their knowledge (cultural capit...

  12. Fourth Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group

    International Nuclear Information System (INIS)

    Schwantes, J.M.; Reilly, D.; Marsden, O.

    2018-01-01

    The Nuclear Forensics International Technical Working Group is a community of nuclear forensic practitioners who respond to incidents involving nuclear and other radioactive material out of regulatory control. The Group is dedicated to advancing nuclear forensic science in part through periodic participation in materials exercises. The Group completed its fourth Collaborative Materials Exercise in 2015 in which laboratories from 15 countries and one multinational organization analyzed three samples of special nuclear material in support of a mock nuclear forensic investigation. This special section of the Journal for Radioanalytical and Nuclear Chemistry is devoted to summarizing highlights from this exercise. (author)

  13. THE TECHNICAL AND ETHNICAL DIVISION OF WORK, THE INDIGEOUS GROUPS AND THE FAMILY BUSINESSES

    Directory of Open Access Journals (Sweden)

    Gloria A. Miranda-Zambrano

    2013-04-01

    Full Text Available The work exposes some forms of indigenous groups participation on entrepreneurial family businesses, mainly in the region of Laja - Bajío where the family plays an important role in these organizations. The work point out the approach on technical ethnic division of labour to locate such actors in labour circuits, in economic activities or guilds that have been built in various social processes. To analyze the ways in which they operate, the role of the family, their knowledge (cultural capital, its forms of linkage with the community of origin and with the Group (social capital, as well as the existence of certain differences with business in common. This research is part of a larger work on family businesses.

  14. [Fortieth Annual] Meeting of the Technical Working Group on Fast Reactors (TWG-FR). Working Material

    International Nuclear Information System (INIS)

    2008-01-01

    The objectives of the meeting were to: - Exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); - Review the progress since the 39th TWG-FR Annual Meeting, including the status of the actions; - Consider meeting arrangements for 2007, 2008 and 2009; - Review the Agency’s ongoing information exchange and co-ordinated research activities in the technical fields relevant to the TWG-FR (FRs and ADS), as well as coordination of the TWG-FR’s activities with other organizations; - Discuss future joint activities in view of the Agency’s Programme and Budget Cycle 2008–2009 (and beyond)

  15. Group Work

    Science.gov (United States)

    Wilson, Kristy J.; Brickman, Peggy; Brame, Cynthia J.

    2018-01-01

    Science, technology, engineering, and mathematics faculty are increasingly incorporating both formal and informal group work in their courses. Implementing group work can be improved by an understanding of the extensive body of educational research studies on this topic. This essay describes an online, evidence-based teaching guide published by…

  16. Meeting of the Technical Working Group on Fast Reactors (TWG-FR) (39th annual meeting). Working material

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The 39th Annual Meeting of the Technical Working Group on Fast Reactors (TWG FR) was held from 15-19 May 2006 in Beijing, China, at the invitation of the China Institute of Atomic Energy (CIAEA). The meeting was attended by TWG-FR Members and Advisers from the following Member States (MS): Belgium (observer), Brazil, China, France, Germany, India, Italy, Japan, the Republic of Kazakhstan, the Republic of Korea, the Russian Federation, Sweden (observer), the United Kingdom, and the United States. Belarus, Switzerland, the European Commission, and OECD/NEA were unable to participate. Moreover, Prof. Carlo Rubbia, CERN director general emeritus, participated, upon IAEA invitation, in the meeting as distinguished scientist and IAEA expert. Mr. S.C. Chetal, from India (Indira Gandhi Centre for Atomic Research, IGCAR), was appointed chairman. The objectives of the meeting were to: - Exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); - Review the progress since the 38th TWG-FR Annual Meeting, including the status of the actions; - Consider meeting arrangements for 2006 and 2007; - Reviewed the Agency's ongoing information exchange and co-ordinated research activities in the technical fields relevant to the TWG-FR (FRs and ADS), as well as co-ordination of the TWG-FR's activities with other organizations; - Discuss future joint activities in view of the Agency's Programme and Budget Cycle 2008-2009 (and beyond)

  17. Report on generation IV technical working group 3 : liquid metal reactors

    International Nuclear Information System (INIS)

    Lineberry, M. J.; Rosen, S. L.; Sagayama, Y.

    2002-01-01

    This paper reports on the first round of R and D roadmap activities of the Generation IV (Gen IV) Technical Working Group (TWG) 3, on liquid metal-cooled reactors. Liquid metal coolants give rise to fast spectrum systems, and thus the reactor systems considered in this TWG are all fast reactors. Gas-cooled fast reactors are considered in the context of TWG 2. As is noted in other Gen IV papers, this first round activity is termed ''screening for potential'', and includes collecting the most complete set of liquid metal reactor/fuel cycle system concepts possible and evaluating the concepts against the Gen IV principles and goals. Those concepts or concept groups that meet the Gen IV principles and which are deemed to have reasonable potential to meet the Gen IV goals will pass to the next round of evaluation. Although we sometimes use the terms ''reactor'' or ''reactor system'' by themselves, the scope of the investigation by TWG 3 includes not only the reactor systems, but very importantly the closed fuel recycle system inevitably required by fast reactors. The response to the DOE Request for Information (RFI) on liquid metal reactor/fuel cycle systems from principal investigators, laboratories, corporations, and other institutions, was robust and gratifying. Thirty three liquid metal concept descriptions, from eight different countries, were ultimately received. The variation in the scope, depth, and completeness of the responses created a significant challenge for the group, but the TWG made a very significant effort not to screen out concepts early in the process

  18. The Nuclear Smuggling International Technical Working Group: Making a difference in combating illicit trafficking

    International Nuclear Information System (INIS)

    Niemeyer, S.; Koch, L.

    2002-01-01

    Full text: The ITWG was first formed in 1995 for the purpose of fostering international cooperation for combating illicit trafficking of nuclear materials. The initial focus for the ITWG was on the development of nuclear forensics to help answer attribution questions regarding nuclear materials of unknown origin. More recently, the ITWG has also expanded its focus to include detection of nuclear materials during transit. This paper presents some of the key developments by this group and their potential impact for combating nuclear smuggling. The initial focus of the ITWG was to write a status report on international cooperation on nuclear smuggling forensic analysis. This 26-page report summarized previous work on nuclear forensics and gave an initial analysis on prioritizing techniques and methods for forensic analysis regarding source and route attribution. This report was submitted to the G-8 countries, and shortly thereafter, nuclear forensics was endorsed at the Moscow Summit in April, 1996, as part of an illicit trafficking program. The work of the ITWG has also been noted at subsequent summit declarations, e.g. Cologne. The ITWG's primary goal is to develop a preferred approach to nuclear forensic investigations that is widely understood and accepted as credible. The technical elements include: 1) development of protocols for a) collection and preservation of evidence and b) for laboratory investigation, 2) prioritizing of techniques for forensic analysis, 3) development of forensic databanks to assist in interpretation, 4) executing inter-laboratory exercises, and 5) facilitating technical assistance to countries upon request. The development of protocols has been conducted jointly by law enforcement officials and laboratory scientists. A major focus during much of the past six years has been the development of a model action plan for nuclear forensics. This action plan lays out the elements that are needed in the instance that illicit nuclear material is

  19. Mixed Methods in Education Research. IES Technical Working Group Meeting. Meeting Summary (Washington, DC, May 29, 2015)

    Science.gov (United States)

    Institute of Education Sciences, 2015

    2015-01-01

    This meeting summary is organized into two major sections. The first section captures the individual contribution of meeting participants, including both Institute of Education Sciences (IES) staff and the invited technical working group members. The second section captures themes that arose during the group discussions, which were organized…

  20. Analyzing Effective Communication in Mathematics Group Work: The Role of Visual Mediators and Technical Terms

    Science.gov (United States)

    Ryve, Andreas; Nilsson, Per; Pettersson, Kerstin

    2013-01-01

    Analyzing and designing productive group work and effective communication constitute ongoing research interests in mathematics education. In this article we contribute to this research by using and developing a newly introduced analytical approach for examining effective communication within group work in mathematics education. By using data from…

  1. Forty-Sixth Meeting of the Technical Working Group on Fast Reactors (TWG-FR). Working Material

    International Nuclear Information System (INIS)

    2013-01-01

    The objectives of the meeting were to: • Review the current status and the progress since the 45th TWG-FR meeting of FR and ADS technology development activities in IAEA Member States; • Review the activities (past, present and planned) of the IAEA’s project 1.1.5.3, “Support for fast reactor research, technology development and deployment” to ensure that they remain relevant to the needs of Member States; • Provide the experts group with updates to advise the IAEA on FR and ADS activities, including on proposals for relevant studies and reviews; • Serve as a means for exchanging information on national and international FR and ADS programmes; • Review the main achievements and outcomes of the “International Conference on Fast Reactors and Related Fuel Cycle: Safe Technologies and Sustainable Scenarios – FR13”, held on 4 – 7 March 2013 in Paris, France; • Promote the exchange of technical information by proposing topics for, and assisting in the organization of, IAEA Workshops and Technical Meetings for 2014-2015 and further, and • Review the IAEA’s concluded, on-going and planned coordinated research projects (CRPs) in the technical fields relevant to the TWG-FR (FRs and ADS), as well as coordination of the TWG-FR’s activities with other organizations and international initiatives (GIF, INPRO, NEA, Euratom, etc.)

  2. The nuclear smuggling international technical working group: Making a difference in combating illicit trafficking

    International Nuclear Information System (INIS)

    Niemeyer, S.; Koch, L.

    2001-01-01

    The ITWG was first formed in 1995 for the purpose of fostering international cooperation for combating illicit trafficking of nuclear materials. The initial focus for the ITWG was on the development of nuclear forensics to help answer attribution questions regarding nuclear materials of unknown origin. More recently, the ITWG has also expanded its focus to include detection of nuclear materials during transit. This paper presents some of the key developments by this group and their potential impact for combating nuclear smuggling. The initial focus of the ITWG was to write a status report on international cooperation on nuclear smuggling forensic analysis. This report was submitted to the G-8 countries, and shortly thereafter, nuclear forensics was endorsed at the Moscow Summit in April, 1996, as part of an illicit trafficking program. The ITWG's primary goal is to develop a preferred approach to nuclear forensic investigations that is widely understood and accepted as credible. The technical elements include: 1) development of protocols for a) collection and preservation of evidence and b) for laboratory investigation; 2) prioritizing of techniques for forensic analysis; 3) development of forensic databanks to assist in interpretation; 4) executing inter-laboratory exercises; and 5) facilitating technical assistance to countries upon request. The development of protocols has been conducted jointly by law enforcement officials and laboratory scientists. A major focus during much of the past five years has been the development of a model action plan for nuclear forensics of seized nuclear materials. This action plan lays out the elements that are needed in the instance that illicit nuclear material is uncovered, e.g. incident response, crime scene analysis, collection of evidence (both radioactive and 'traditional' forensics, transportation to a nuclear facility, subsequent laboratory analysis, and then development of the case. At the most recent meeting (ITWG-6

  3. Forty-Second Meeting of the Technical Working Group on Fast Reactors (TWG-FR). Working Material

    International Nuclear Information System (INIS)

    2009-01-01

    The objectives of the meeting were to: - Exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); - Review the progress since the 41st TWG-FR Annual Meeting, including the status of the actions; - Consider topical technical meetings meeting arrangements for 2009, 2010, 2011 and beyond; - Review the IAEA’s ongoing information exchange and coordinated research activities in the technical fields relevant to the TWG-FR (FRs and ADS), as well as coordination of the TWG-FR’s activities with other organizations and international initiatives; - Discuss future joint activities in view of IAEA’s Programme and Budget Cycles beyond 2010-2011

  4. Forty-Fourth Meeting of the Technical Working Group on Fast Reactors (TWG-FR). Working Material

    International Nuclear Information System (INIS)

    2011-01-01

    The objectives of the meeting were to: - Exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); - Review the progress since the 43rd TWG-FR Annual Meeting, including the status of the actions; - Consider topical technical meeting arrangements for 2012-2013, as well as review FR-related activities included in the IAEA Project&Budget (P&B) biennium 2012-2013; - Review the IAEA’s ongoing information exchange and coordinated research projects in the technical fields relevant to the TWG-FR (FRs and ADS), as well as coordination of the TWG-FR’s activities with other organizations and international initiatives (GIF, INPRO, NEA, ESNII, etc.)

  5. Mars together and FIRE and ICE: Report of the joint US/Russian technical working groups

    Science.gov (United States)

    1994-10-01

    The Cold War's end opened an opportunity for greater cooperation in planetary exploration for the United States and Russia. Two study groups were formed, Mars Together and FIRE and ICE. The Mars Together team developed a concept for a flight in 1998 that merged one U.S. Mars Surveyor 98 mission with the former Russian Mars 96 mission to further understanding of the Mars surface and atmosphere. The FIRE and ICE team developed concepts for a dual-spacecraft mission to the solar corona and for a mission to Pluto. The missions, scientific potential, and open issues are described.

  6. Mars together and FIRE and ICE: Report of the joint US/Russian technical working groups

    Science.gov (United States)

    1994-01-01

    The Cold War's end opened an opportunity for greater cooperation in planetary exploration for the United States and Russia. Two study groups were formed, Mars Together and FIRE and ICE. The Mars Together team developed a concept for a flight in 1998 that merged one U.S. Mars Surveyor 98 mission with the former Russian Mars 96 mission to further understanding of the Mars surface and atmosphere. The FIRE and ICE team developed concepts for a dual-spacecraft mission to the solar corona and for a mission to Pluto. The missions, scientific potential, and open issues are described.

  7. Meeting of the Technical Working Group on Fast Reactors (TWG-FR) (41st Annual Meeting). Working Material

    International Nuclear Information System (INIS)

    2008-01-01

    The objectives of the meeting were to: - Exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); - Review the progress since the 40th TWG-FR Annual Meeting, including the status of the actions; - Consider meeting arrangements for 2008, 2009, 2010 and beyond; - Review the IAEA’s ongoing information exchange and coordinated research activities in the technical fields relevant to the TWG-FR (FRs and ADS), as well as coordination of the TWG-FR’s activities with other organizations and international initiatives; - Discuss future joint activities in view of IAEA’s Programme and Budget Cycles beyond 2008-2009

  8. Forty-Fifth Annual Meeting of the Technical Working Group on Fast Reactors (TWG-FR). Working Material

    International Nuclear Information System (INIS)

    2012-01-01

    The objectives of the meeting were to: • Exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); • Review the progress since the 44 th TWG-FR Annual Meeting, including the status of the actions; • Consider topical technical meeting arrangements for 2012-2013, as well as review FR-related activities included in the IAEA Programme & Budget (P&B) biennium 2012-2013; • Review the IAEA’s concluded, on-going and planned coordinated research projects in the technical fields relevant to the TWG-FR (FRs and ADS), as well as coordination of the TWG-FR’s activities with other organizations and international initiatives (GIF, INPRO, NEA, ESNII, etc.). The 45th Meeting of the TWG-FR reached the following conclusions/recommendations: • The participants expressed satisfaction and appreciation for the large amount of new information on on-going activities carried out by the Member States in the field of FR and ADS exchanged during the meeting; • Also the organizations which have participated to the TWG-FR meeting for the first time expressed their appreciation for the lively discussion and the results and thanked the IAEA for inviting them at the meeting; • The meeting was very useful in particular for collecting inputs and advice in view of the preparation of the IAEA Programme & Budget 2014-2015 (and then 2016-2017) in the area of FR and ADS technology development; • The TWG-FR remains an unique international forum for information exchange in the field of fast neutron systems and for promoting RT&D activities in this area; • Due to the increasing interest in FR and in view of the forthcoming realizations, it would be advisable to increase the involvement of industries, regulators and other R&D organizations; • The annual TWG-FR meeting should focused on exchange of information on national and international programmes, avoiding duplications or overlapping’s with other IAEA initiatives in the field;

  9. Nuclear Forensics International Technical Working Group (ITWG): a collaboration of scientists, law enforcement officials, and regulators working to combat nuclear terrorism and proliferation

    Energy Technology Data Exchange (ETDEWEB)

    Schwantes, Jon M.

    2013-10-25

    Founded in 1996 upon the initiative of the “Group of 8” governments (G8), the Nuclear Forensics International Technical Working Group (ITWG) is an ad hoc organization of official Nuclear Forensics practitioners (scientists, law enforcement, and regulators) that can be called upon to provide technical assistance to the global community in the event of a seizure of nuclear or radiological materials. The ITWG is supported by and is affiliated with nearly 40 countries and international partner organizations including the International Atomic Energy Agency (IAEA), EURATOM, INTERPOL, EUROPOL, and the United Nations Interregional Crime and Justice Research Institute (UNICRI) (Figure 1). Besides providing a network of nuclear forensics laboratories that are able to assist the global community during a nuclear smuggling event, the ITWG is also committed to the advancement of the science of nuclear forensic analysis, largely through participation in periodic table top and Collaborative Materials Exercises (CMXs). Exercise scenarios use “real world” samples with realistic forensics investigation time constraints and reporting requirements. These exercises are designed to promote best practices in the field and test, evaluate, and improve new technical capabilities, methods and techniques in order to advance the science of nuclear forensics. Past efforts to advance nuclear forensic science have also included scenarios that asked laboratories to adapt conventional forensics methods (e.g. DNA, fingerprints, tool marks, and document comparisons) for collecting and preserving evidence comingled with radioactive materials.

  10. Researching College- and Career Ready Standards to Improve Student Outcomes: Technical Working Group Meeting. Meeting Summary (Washington, DC, August 19-20, 2013)

    Science.gov (United States)

    Institute of Education Sciences, 2013

    2013-01-01

    In August, IES worked with the National Science Foundation and the Eunice Kennedy Shriver National Institute of Child Health and Human Development to convene a technical working group to discuss research objectives related to college- and career-ready standards in English language arts and mathematics. Forty people (including researchers,…

  11. Group Work Publication-1991.

    Science.gov (United States)

    Zimpfer, David G.

    1992-01-01

    Lists 21 new publications in group work, of which 9 are reviewed. Those discussed include publications on group counseling and psychotherapy, structured groups, support groups, psychodrama, and social group work. (Author/NB)

  12. The contribution of the CSNI Principal Working Group on Confinement of Accidental Radioactive Releases to the technical consensus and spreading of knowledge on severe accidents

    International Nuclear Information System (INIS)

    De Boeck, B.; Royen, J.

    1999-01-01

    The Nuclear Energy Agency (NEA) Committee on the Safety of Nuclear Installations (CSNI) is an international committee made up of scientists and engineers. It was set up 1973 to develop and co-ordinate the activities of the NEA concerning the technical aspects of the design, construction and operation of nuclear installations insofar as they affect the safety of such installations. The Committee's purpose is to foster international cooperation in nuclear safety amongst the Member countries. Five Principal Working Groups (PWG) operate under the leadership of CSNI. PWG4 is named 'Confinement of Accidental Radioactive Releases' and its main activities are State of the Art Reports, International Standard Problem exercises, Specialist Meetings and Technical Opinion Papers. Together with other groups of experts involved in severe accident work, PWG4 has strongly contributed to the understanding of phenomena and the development of the knowledge base in that area, to the resolution of technical issues, and to the dissemination of the results. Taking examples from the products of the work of PWG4, the paper shows how this working group fosters international co-operation in the area of severe accidents and their management, and contributes to the development of a technical consensus. (author)

  13. WHO Working Group on Technical Specifications for Manufacture and Evaluation of Yellow Fever Vaccines, Geneva, Switzerland, 13-14 May 2009.

    Science.gov (United States)

    Ferguson, Morag; Shin, Jinho; Knezevic, Ivana; Minor, Philip; Barrett, Alan

    2010-12-06

    In May 2009, WHO convened a meeting of Working Group on Technical Specifications for Manufacturing and Evaluating Yellow Fever (YF) Vaccines, Geneva, Switzerland to initiate revision of the WHO Recommendations (formerly, Requirements) for YF vaccine published in WHO Technical Report Series number 872 (1998). The Working Group, consisting of experts from academia, industry, national regulatory authorities and national control laboratories, reviewed the latest issues of safety, efficacy and quality of YF vaccines and agreed that (i) the revision should focus on live attenuated YF vaccine virus 17D lineage; and that (ii) nonclinical and clinical guidelines for new vaccines prepared from 17D lineage be developed. Copyright © 2010. Published by Elsevier Ltd.. All rights reserved.

  14. Technical meeting (TM) to 'Review of national programmes on fast reactors and accelerator driven systems (ADS)'. Technical Working Group on Fast Reactors (TWG-FR) (37th annual meeting). Working material

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The objectives of the 37th Annual Meeting of the Technical Working Group on Fast Reactors, were to: 1) exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); 2) review the progress since the 36th TWG-FR Annual Meeting, including the status of the actions; 3) consider meeting arrangements for 2004 and 2005; 4) review the Agency's co-ordinated research activities in the field of FRs and ADS, as well as co-ordination of the TWG-FR's activities with other organizations. The participants made presentations on the status of the respective national programmes on FR and ADS development. A summary of the highlights for the period since the 36th TWG-FR Annual Meeting is included in this proceedings. Annex IV contains the Review of National Programs on Fast Reactors and Accelerator Driven Systems (ADS), and the TWG-FR Activity Report for the Period May 2003-April 2004.

  15. Technology working group

    International Nuclear Information System (INIS)

    Tsujikura, Y.

    2000-01-01

    The workshop of 26-27 june 2000, on nuclear power Plant LIfe Management (PLIM), also included working groups in which major issues facing PLIM activities for nuclear power plants were identified and discussed. The first group was on Technology. Utilities should consider required provisions capacity by properly maintaining and preserving the existing power plants to the extent practicable and taking into account growing demand, limits of energy conservation, and difficulties in finding new power plant sites. Generally, the extension of the life of nuclear power plant (e.g. from 40 years to 60 years) is an attractive option for utilities, as the marginal cost of most existing nuclear power plants is lower than that of almost all other power sources. It is also an attractive option for environmental protection. Consequently, PLIM has become an important issue in the context of the regulatory reform of the electricity markets. Therefore, the three main objectives of the Technology working group are: 1) Documenting how the safety of nuclear power plants being operated for the long-term has been confirmed, and suggesting ways of sharing this information. 2) Addressing development of advanced maintenance technologies necessary over the plant lifetime, and clarifying their technical challenges. 3) Suggesting potential areas of research and development that might, be necessary. Some potential examples of such research include: - improving the effectiveness of maintenance methods to assure detection of incipient faults; - providing cost effective preventive maintenance programmes; - furnishing systematic, cost-effective refurbishment programmes framed to be consistent with efforts to extend the time between re-fuelling; - developing a methodology that moves routine maintenance on-line without compromising safety. (author)

  16. Working Group 7 Summary

    Energy Technology Data Exchange (ETDEWEB)

    Nagaitsev S.; Berg J.

    2012-06-10

    The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

  17. Working group 5: Safety

    International Nuclear Information System (INIS)

    Vinck, W.

    1976-01-01

    The technical aspects of safety for the LWR nuclear power plants, and a reprocessing plant are considered. The origin, the type and the extent of the risks for the civil populations are presented for normal working as well as accidental conditions. A general estimate of comparative risks is given for the nuclear industry with respect to other activities. The legal Belgian aspects and their applications, the kind and the quality of the technical testings, the back-fitting of plants are analysed. Considerations are given on the probabilistic analysis, the safety, and the off-shore power plants. (A.F.)

  18. NWMO transportation technical work program

    International Nuclear Information System (INIS)

    Hatton, C.

    2015-01-01

    This paper describes technical work program for the transportation nuclear waste by the Nuclear Waste Management Organization (NWMO). Transportation work program involves risk assessment which under normal conditions involves dose assessment to the worker and the public as well as consideration of transportation system routing and operations. It also involves possible accident scenarios using forensic modelling and probability analysis.

  19. NWMO transportation technical work program

    Energy Technology Data Exchange (ETDEWEB)

    Hatton, C. [Nuclear Waste Management Organization, Toronto, ON (Canada)

    2015-07-01

    This paper describes technical work program for the transportation nuclear waste by the Nuclear Waste Management Organization (NWMO). Transportation work program involves risk assessment which under normal conditions involves dose assessment to the worker and the public as well as consideration of transportation system routing and operations. It also involves possible accident scenarios using forensic modelling and probability analysis.

  20. Forty-Fifth Annual Meeting of the Technical Working Group on Fast Reactors (TWG-FR). Presentations

    International Nuclear Information System (INIS)

    2012-01-01

    The objectives of the meeting were to: • Exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); • Review the progress since the 44 th TWG-FR Annual Meeting, including the status of the actions; • Consider topical technical meeting arrangements for 2012-2013, as well as review FR-related activities included in the IAEA Programme & Budget (P&B) biennium 2012-2013; • Review the IAEA’s concluded, on-going and planned coordinated research projects in the technical fields relevant to the TWG-FR (FRs and ADS), as well as coordination of the TWG-FR’s activities with other organizations and international initiatives (GIF, INPRO, NEA, ESNII, etc.)

  1. Multicultural group work

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    2014-01-01

    Motivation for the activity I use this strategy for forming groups to ensure diverse/multicultural groups that combine a variety of different strengths and resources based on student's academic, disciplinary, linguistic, national, personal and work backgrounds.......Motivation for the activity I use this strategy for forming groups to ensure diverse/multicultural groups that combine a variety of different strengths and resources based on student's academic, disciplinary, linguistic, national, personal and work backgrounds....

  2. Overall approaches and experiences of first-time participants in the Nuclear Forensics International Technical Working Group's Fourth Collaborative Material Exercise (CMX-4)

    International Nuclear Information System (INIS)

    Ho, D.M.L.; Nelwamondo, A.N.; Hancke, J.J.; Ramebaeck, Henrik

    2018-01-01

    The Fourth Collaborative Material Exercise (CMX-4) of the Nuclear Forensics International Technical Working Group (ITWG) registered the largest participation for this exercise in nuclear forensics, with seven of the 17 laboratories participating for the first time. Each of the laboratories had their strategic role to play in its respective country, analyzing real-world samples using their in-house resources. The scenario was fictitious but was thoughtfully crafted to engage participants in nuclear forensic investigations. In this paper, participants from five of the first-time laboratories shared their individual experience in this exercise, from preparation to analysis of samples. (author)

  3. Computational methods working group

    International Nuclear Information System (INIS)

    Gabriel, T.A.

    1997-09-01

    During the Cold Moderator Workshop several working groups were established including one to discuss calculational methods. The charge for this working group was to identify problems in theory, data, program execution, etc., and to suggest solutions considering both deterministic and stochastic methods including acceleration procedures.

  4. Group Work. Research Brief

    Science.gov (United States)

    Walker, Karen

    2010-01-01

    According to Johnson and Johnson, group work helps increase student retention and satisfaction, develops strong oral communication and social skills, as well as higher self-esteem (University of Minnesota, n.d.). Group work, when planned and implemented deliberately and thoughtfully helps students develop cognitive and leadership skills as well as…

  5. Achievements of the IAEA technical working group on life management of nuclear power plants (TWG-LMNPP) under the chairmanship of Acad. Myrddin Davies

    International Nuclear Information System (INIS)

    Kang, K.-S.; Tipping, Philip

    2004-01-01

    This meeting, organised by CRISM-PROMETEY in St Petersburg, Russia, is held to honour the memory of Academician Myrddin Davies, who passed away due to a tragic road accident on 11 March 2003 in Stretton, England. Academician Myrddin Davies started technical collaboration with the IAEA in the early 1980s, and in 1985 became chairman of the International Working Group on Reliability of Reactor Pressure Components (IWG-RRPC). Under his chairmanship this grew to become the Technical Working Group on Life Management of Nuclear Power Plants (TWG-LMNPP) covering broader issues and with world wide collaboration. An insight to the creation, working methods and achievements of the TWG-LMNPP is given in this paper. Acad. Myrddin Davies was a competent chairman at many specialist meetings, major conferences hosted by IAEA, other European organizations and Nuclear Engineering International activities. The direction given to the TWG-LMNPP by Acad. Myrddin Davies is shown to have made a significant contribution to the safe use of nuclear energy. Major contributions to nuclear technology of the TWG-LMNPP, during the Chairmanship of Myrddin Davies, are thus cited

  6. Space Interferometry Science Working Group

    Science.gov (United States)

    Ridgway, Stephen T.

    1992-12-01

    Decisions taken by the astronomy and astrophysics survey committee and the interferometry panel which lead to the formation of the Space Interferometry Science Working Group (SISWG) are outlined. The SISWG was formed by the NASA astrophysics division to provide scientific and technical input from the community in planning for space interferometry and in support of an Astrometric Interferometry Mission (AIM). The AIM program hopes to measure the positions of astronomical objects with a precision of a few millionths of an arcsecond. The SISWG science and technical teams are described and the outcomes of its first meeting are given.

  7. Technical committee meeting on Liquid Metal Fast Reactor (LMFR) developments. 33rd annual meeting of the International Working Group on Fast Reactors (IWG-FR). Working material

    International Nuclear Information System (INIS)

    2000-01-01

    Over the past 33 years, the IAEA has actively encouraged and advocated international cooperation in fast reactor technology. The present publication contains information on the status of fast reactor development and on worldwide activities in this advanced nuclear power technology during 1999/2000, as reported at the 33. annual meeting of the International Working Group on Fast Reactors. It is intended to provide information regarding the current status of LMFR development in IAEA Member States

  8. Application of best practicable technology to water management at Ranger Uranium mine: report of the technical working group

    International Nuclear Information System (INIS)

    1986-12-01

    An assessment is made of best practicable technology (BPT) as applied to the water management system of Ranger Uranium Mines for the period 1986-91. A specification of BPT cannot be made for the indefinite future because major changes in operation of the mine may occur which could have an impact on future water management. It is for these reasons that the period of detailed assessment has been limited to the next 5 years. For the purposes of the report, BPT is considered to be that technology relevant to the Ranger project which produced the minimum environmental pollution and degradation that can reasonably be achieved, having regard to a number of technical factors, including practice in uranium mining elsewhere in the world, cost, evidence of detriment or lack of it, project location and the age and effectiveness of equipment and facilities at Ranger. Three options are presented, in order of preference: no prohibition on release to Magela Creek, limitation on frequency of release to Magela Creek and prohibition on release to Magela Creek

  9. MDEP Technical Report TR-DICWG-01. Technical Report on the Relational Structure of the Digital Instrumentation and Controls Working Group (DICWG) Common Positions

    International Nuclear Information System (INIS)

    2016-10-01

    Unlike other technical disciplines, digital instrumentation and controls (DI and C) is a field which reflects the constant evolution in electrical and electronics technologies. The continual evolution in DI and C technology presents challenges for power plant operators, designers, suppliers, as well as the regulators. Contemporary regulations and guidance can be made either obsolete or insufficient as technology changes push the boundaries of what was originally considered or completely change the assumptions that were the foundation when they were first enacted. As such, producing timely and practical guidance is essential to the safe operation of nuclear plants. The goal of MDEP is not to independently develop new regulatory standards. The overall philosophy of MDEP DICWG is to use the collective knowledge and experiences from nuclear power regulatory organisations from around the world to effectively and efficiently create CPs to address current and future DI and C topics of concern to its member countries. The CPs provide an effective and efficient means to convey a general framework that includes input from both member countries and international standards organisations. Each CP produced by DICWG represents an agreed upon approach to address the specific topic for which it has been created. CPs are not legally binding and do not constitute additional obligations for the regulatory organisations or the licensees but are guidelines, recommendations or assessments that the MDEP participants agree are good to highlight during their safety reviews of new reactors. MDEP member countries may decide to implement the CPs through their own national regulatory processes. The topics that are addressed in current and upcoming CPs reflect a wide variety of technical topics that are challenging in the DI and C field and oftentimes require a holistic approach to reach resolution. The topics for CPs are selected based upon the use of DI and C in new reactor designs, issues of

  10. Parton Distributions Working Group

    International Nuclear Information System (INIS)

    Barbaro, L. de; Keller, S. A.; Kuhlmann, S.; Schellman, H.; Tung, W.-K.

    2000-01-01

    This report summarizes the activities of the Parton Distributions Working Group of the QCD and Weak Boson Physics workshop held in preparation for Run II at the Fermilab Tevatron. The main focus of this working group was to investigate the different issues associated with the development of quantitative tools to estimate parton distribution functions uncertainties. In the conclusion, the authors introduce a Manifesto that describes an optimal method for reporting data

  11. Preparation of a technology development roadmap for the Accelerator Transmutation of Waste (ATW) System : report of the ATW separations technologies and waste forms technical working group

    International Nuclear Information System (INIS)

    Collins, E.; Duguid, J.; Henry, R.; Karell, E.J.; Laidler, J.J.; McDeavitt, S.M.; Thompson, M.; Toth, L.M.; Williamson, M.; Willit, J.L.

    1999-01-01

    In response to a Congressional mandate to prepare a roadmap for the development of Accelerator Transmutation of Waste (ATW) technology, a Technical Working Group comprised of members from various DOE laboratories was convened in March 1999 for the purpose of preparing that part of the technology development roadmap dealing with the separation of certain radionuclides for transmutation and the disposal of residual radioactive wastes from these partitioning operations. The Technical Working Group for ATW Separations Technologies and Waste Forms completed its work in June 1999, having carefully considered the technology options available. A baseline process flowsheet and backup process were identified for initial emphasis in a future research, development and demonstration program. The baseline process combines aqueous and pyrochemical processes to permit the efficient separation of the uranium, technetium, iodine and transuranic elements from the light water reactor (LWR) fuel in the head-end step. The backup process is an all- pyrochemical system. In conjunction with the aqueous process, the baseline flowsheet includes a pyrochemical process to prepare the transuranic material for fabrication of the ATW fuel assemblies. For the internal ATW fuel cycle the baseline process specifies another pyrochemical process to extract the transuranic elements, Tc and 1 from the ATW fuel. Fission products not separated for transmutation and trace amounts of actinide elements would be directed to two high-level waste forms, one a zirconium-based alloy and the other a glass/sodalite composite. Baseline cost and schedule estimates are provided for a RD and D program that would provide a full-scale demonstration of the complete separations and waste production flowsheet within 20 years

  12. Preparation of a technology development roadmap for the Accelerator Transmutation of Waste (ATW) System : report of the ATW separations technologies and waste forms technical working group.

    Energy Technology Data Exchange (ETDEWEB)

    Collins, E.; Duguid, J.; Henry, R.; Karell, E.; Laidler, J.; McDeavitt, S.; Thompson, M.; Toth, M.; Williamson, M.; Willit, J.

    1999-08-12

    In response to a Congressional mandate to prepare a roadmap for the development of Accelerator Transmutation of Waste (ATW) technology, a Technical Working Group comprised of members from various DOE laboratories was convened in March 1999 for the purpose of preparing that part of the technology development roadmap dealing with the separation of certain radionuclides for transmutation and the disposal of residual radioactive wastes from these partitioning operations. The Technical Working Group for ATW Separations Technologies and Waste Forms completed its work in June 1999, having carefully considered the technology options available. A baseline process flowsheet and backup process were identified for initial emphasis in a future research, development and demonstration program. The baseline process combines aqueous and pyrochemical processes to permit the efficient separation of the uranium, technetium, iodine and transuranic elements from the light water reactor (LWR) fuel in the head-end step. The backup process is an all- pyrochemical system. In conjunction with the aqueous process, the baseline flowsheet includes a pyrochemical process to prepare the transuranic material for fabrication of the ATW fuel assemblies. For the internal ATW fuel cycle the baseline process specifies another pyrochemical process to extract the transuranic elements, Tc and 1 from the ATW fuel. Fission products not separated for transmutation and trace amounts of actinide elements would be directed to two high-level waste forms, one a zirconium-based alloy and the other a glass/sodalite composite. Baseline cost and schedule estimates are provided for a RD&D program that would provide a full-scale demonstration of the complete separations and waste production flowsheet within 20 years.

  13. Natural analogue working group

    International Nuclear Information System (INIS)

    Come, B.; Chapman, N.

    1986-01-01

    A Natural Analogue Working Group was established by the Commission of the European Communities in 1985. The purpose of this group is to bring together modellers with earth scientists and others, so that maximum benefit can be obtained from natural analogue studies with a view to safe geological disposal of radioactive waste. The first meeting of this group was held in Brussels from November 5 to 7, 1985. The discussions mainly concerned the identification of the modellers' needs and of the earth scientists' capacity to provide for them. Following the debates, a written statement was produced by the Group; this document forms the core of the present Report. Notes and outlines of many of the presentations made are grouped in four appendixes. The valuable contribution of all those involved in the meeting is gratefully acknowledged

  14. Working Group Report: Neutrinos

    Energy Technology Data Exchange (ETDEWEB)

    de Gouvea, A.; Pitts, K.; Scholberg, K.; Zeller, G. P. [et al.

    2013-10-16

    This document represents the response of the Intensity Frontier Neutrino Working Group to the Snowmass charge. We summarize the current status of neutrino physics and identify many exciting future opportunities for studying the properties of neutrinos and for addressing important physics and astrophysics questions with neutrinos.

  15. [Ageing and work: technical standards].

    Science.gov (United States)

    De Vito, G; Riva, M A; Meroni, R; Cesana, G C

    2010-01-01

    Over the last few years, studies on the relationship between ageing and work have attracted growing interest due to the increased probability among workers of developing major health problems as a consequence of ageing of the working population. Negative outcomes for health are possible when an age-related imbalance appears between physical workload and physical work capacity. Interventions based on workload reductions should help to keep workers on the job for as long as allowed by law. Reference masses by age and sex are suggested by the technical standards of the ISO 11228 series, which are also quoted by Italian law D.Lgs. 81/2008, and EN 1005 series, which recommend limits valid also for manual material handling, and pushing and pulling. Decreasing low back pain prevalence or recurrence, in an ageing population with high prevalence of back disorders, could be more effective than many other approaches to enhance workers' quality of life and consequently maintain and improve workers' performance.

  16. Multibunch working group

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The goal of this working group was to foment discussions about the use and limitations of multi-bunch, representatives from most operating or in-project synchrotron radiation sources (ALS, SPEAR, BESSY-2, SPRING-8, ANKA, DELTA, PEP-2, DIAMOND, ESRF...) have presented their experience. The discussions have been led around 3 topics: 1) resistive wall instabilities and ion instabilities, 2) higher harmonic cavities, and 3) multibunch feedback systems.

  17. Working group 4: Terrestrial

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    A working group at a Canada/USA symposium on climate change and the Arctic identified major concerns and issues related to terrestrial resources. The group examined the need for, and the means of, involving resource managers and users at local and territorial levels in the process of identifying and examining the impacts and consequences of climatic change. Climatic change will be important to the Arctic because of the magnitude of the change projected for northern latitudes; the apparent sensitivity of its terrestrial ecosystems, natural resources, and human support systems; and the dependence of the social, cultural, and economic welfare of Arctic communities, businesses, and industries on the health and quality of their environment. Impacts of climatic change on the physical, biological, and associated socio-economic environment are outlined. Gaps in knowledge needed to quantify these impacts are listed along with their relationships with resource management. Finally, potential actions for response and adaptation are presented

  18. Business working group

    International Nuclear Information System (INIS)

    Doroshuk, B.W.

    2000-01-01

    The workshop of 26-27 june 2000, on nuclear power Plant LIfe Management (PLIM), also included working groups in which major issues facing PLIM activities for nuclear power plants were identified and discussed. The third group was on Business. The discussion concerned the following points: There are concerns about retaining experienced/trained personnel, and maintaining a good working relationship among them, as well as about the closure of research facilities, the reduction in staff numbers under increasing economic pressure and the lack of new nuclear power plant constructions. The marginal cost of producing electricity is lower for most existing nuclear power plants than for almost all other energy sources. Refurbishment costs are usually relatively small compared with new investments. The ongoing regulatory reform of the electricity market will bring increasing competition. Although PLIM has been carried out in many countries with favourable results, there are still uncertainties which affect business decisions regarding financial and market risks in PLIM activities. Recommendations were made. (author)

  19. Working Group Report: Sensors

    Energy Technology Data Exchange (ETDEWEB)

    Artuso, M.; et al.,

    2013-10-18

    Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges.

  20. Works Technical Department progress report, March 1961

    Energy Technology Data Exchange (ETDEWEB)

    None

    1961-04-19

    This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

  1. Oklo working group meeting

    International Nuclear Information System (INIS)

    Von Maravic, H.

    1993-01-01

    Natural analogue studies have been carried out for several years in the framework of the European Community's R and D programme on radioactive waste; and within its recent fourth five-year programme on 'Management and storage of radioactive waste (1990-94)' the Community is participating in the Oklo study, natural analogue for transfer processes in a geological repository. The Oklo project is coordinated by CEA-IPSN (F) and involves laboratories from several CEA directorates (IPSN, DTA and DCC) which collaborate with other institutions from France: CREGU, Nancy; CNRS, Strasbourg and ENSMD, Fontainebleau. Moreover, institutes from non-EC member States are also taking part in the Oklo study. The second joint CEC-CEA progress meeting of the Oklo Working Group was held in April 1992 in Brussels and gave the possibility of reviewing and discussing progress made since its first meeting in February 1991 at CEA in Fontenay-aux-Roses. About 40 participants from 15 laboratories and organizations coming from France, Canada, Gabon, Japan, Sweden and the USA underline the great interest in the ongoing research activities. The meeting focused on the different tasks within the CEC-CEA Oklo project concerning (i) field survey and sampling, (ii) characterization of the source term, (iii) studies of the petrographical and geochemical system, and (iv) studies of the hydrogeological system and hydrodynamic modelling. (author) 17 papers are presented

  2. Utilization of a technical review group during a BWR owners group technical specification improvement study

    International Nuclear Information System (INIS)

    Hansell, H.F.; Moyer, D.P.

    1986-01-01

    A BWR Owners' Group Technical Specification Improvement (TSI) Committee was formed in late 1983. A primary goal of this Committee was to encourage the development of a probabilistic methodology for technical specification improvements which could be readily applied by utilities. The TSI Committee elected to hire a Contractor to develop and demonstrate a method. After the Contractor was selected and has started work, the committee decided to establish a Technical Review Group (TRG) to efficiently and effectively review the Contractor's analyses. The TRG met frequently with the Contractor as the analyses were being performed. These meetings were held at the Contractor's facility in order to allow direct contact between reviewers and individuals performing the work. The TRG was also involved with all major interactions with the NRC. The significance and merit of using a peer review group in this manner is the theme of this paper. In order to present a discussion of the significance and merit of the TRG, the activities are described. The summary of the analytical approach is provided to more full understand the TRG activities

  3. Group Work: How to Use Groups Effectively

    Science.gov (United States)

    Burke, Alison

    2011-01-01

    Many students cringe and groan when told that they will need to work in a group. However, group work has been found to be good for students and good for teachers. Employers want college graduates to have developed teamwork skills. Additionally, students who participate in collaborative learning get better grades, are more satisfied with their…

  4. Accelerator driven sub-critical systems for waste transmutation: co-operation and co-ordination in Europe and the role of the technical working group

    International Nuclear Information System (INIS)

    Salvatores, M.; Monti, S.

    2001-01-01

    The TWG under the chairmanship of Carlo Rubbia, enlarged from the three initial partners (France, Italy, Spain) to ten partners (Austria, Belgium, Finland, France, Germany, Italy, JRC, Portugal, Spain, Sweden), has worked to identify critical technical issues, R and D needs and a strategy in view of an ADS demonstration programme. A road map document is being prepared, and state of the art reports have been issued in Accelerator and Fuel and Fuel Processing Technologies. The TWG allows also a monitoring and harmonization of other European projects, like: the MEGAPIE project for the construction and operation of a 1 MWt Pb/Bi target in the SINQ installation in PSI-Switzerland; the proposal for a preliminary design study of an XADS; which will be both submitted to the second call of P and T within the 5. European Framework Programme. (author)

  5. The Acquisition, Calibration, and Analysis of CTD Data. Unesco Technical Papers in Marine Science No. 54. (A Report of SCOR Working Group 51).

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Div. of Marine Sciences.

    In this report the members of the Scientific Committee on Ocean Research Working Group 51 have attempted to describe the total process involved in obtaining salinity and temperature profiles with modern conductivity-temperature-depth (CTD) instruments. Their objective has been to provide a guide to procedures which will, if allowed, lead to the…

  6. Continuing Education for Early Primary School Leavers. Report of a Technical Working Group Meeting (Chiang Mai, Thailand, October 4-11, 1988).

    Science.gov (United States)

    United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

    This report summarizes discussions of a working group meeting on the continuing education needs of early primary school leavers in Asia and the Pacific. An introduction summarizes the welcoming addresses. Chapter 1 presents highlights of experiences of these countries in providing continuing education to school leavers: Bangladesh, China, India,…

  7. ORGANIZATIONAL WORK GROUPS AND WORK TEAMS – APPROACHES AND DIFFERENCES

    Directory of Open Access Journals (Sweden)

    Raluca ZOLTAN

    2015-02-01

    Full Text Available Work groups and work teams represents basic structures of traditional and modern organizations, and during the time they have been intensively researched. However, managers often do not always consider the fundamental differences between groups and teams, which will lead to unrealistic goals and results below expectations. Thus, in the present paper we propose a review of the main researching approaches on groups and teams (psychosocial, socio-technical, and behavioral approach, in the third part of the paper being detailed the fundamental differences between groups and teams in the light of these approaches.

  8. Dealer Group or Financial Planning Group? A Brief Technical Note

    Directory of Open Access Journals (Sweden)

    Lujer Santacruz

    2011-06-01

    Full Text Available This technical note examines whether the industry practice of using the term dealer group when referring to afinancial planning group contributes to the general perception that financial advisers are not objective whenmaking financial product recommendations. An experimental design carried out through an online survey isused. This is supplemented by a direct comparison survey on the two terminologies. The results provide acase for the industry to adopt a new terminology.

  9. The didactics of group work

    DEFF Research Database (Denmark)

    Christensen, Gerd

    2017-01-01

    The aim of this paper is to discuss aims and means of group work as a teaching and learning method. In Denmark, group work has been implemented at all levels of education since the 1970s from primary school to university but also in training sessions in organizations. The discussion in this paper...... will take its point of departure in pedagogical textbook introductions where group work is often presented as a means to learning social skills and co-workability. However, as most students and teachers know, this is not always the case. Observations of long-term group work show that this can be a tough...... experience for the students (Christensen 2013). Contrary to expectations, the group work seemed to foster anti-social behavior and development of selfish skills. The paper will therefore conclude by suggesting how the (often) laissez-faire group pedagogy, which is dominant in Denmark, could be improved...

  10. Storage of radioactive wastes in geological formations. Technical criteria for site selection. Report by the work-group chaired by Professor Goguel

    International Nuclear Information System (INIS)

    Goguel, Jean; Candes, Pierre; Izabel, Cecile; Autran, Albert; Barthoux, Alain; Baudin, Guy; Devillers, Christian; Habib, Pierre; Lafuma, Jacques; Lefevre, Jean; Peaudecerf, Pierre; Pradel, Jacques; Salle, Claude; Treuil, Michel; Lebrun, Patrick; Tissier, Marie-Solange

    1985-06-01

    This document is the result of a prospective mission on the long term storage of radioactive wastes containing long-period emitters (wastes of B and C categories), and notably on a definitive storage in deep continental geological formations. After a presentation of hypotheses (brief description of the storage concept, main safety principles, objectives in terms of radiological safety, safety options, time-related considerations), the authors addressed the following issues: safety before closing during the exploitation period, and safety after closure (after backfilling and sealing of all underground cavities). For the first issue, they discuss the impacts of works on safety and thermal effects during exploitation. For the second issue, they discuss the site natural hydro-geological context, the disturbances brought by the storage (access of water to the storage, and return of water into the biosphere), and the influence of external factors (geological phenomena, human intrusion). Then, the authors make recommendations regarding reconnaissance programs and studies for the selection and qualification of a site. They finally propose technical criteria and main recommendations for site selection. Appendices propose a list of hearings, a presentation of the storage concept, a report on the impact of works, a report on the presence of mineralisation in granite massifs, reports on radiological consequences of intrusions in salt formations and in granite massif containing storage of radioactive wastes or vitrified wastes, a report on the characterization of unsteady parts of the French continental construction, a presentation of the evolution of climate and icings, and a study of seismic movements in the case of deep storages

  11. Group Work with Transgender Clients

    Science.gov (United States)

    Dickey, Lore M.; Loewy, Michael I.

    2010-01-01

    Drawing on the existing literature, the authors' research and clinical experiences, and the first author's personal journey as a member and leader of the transgender community, this article offers a brief history of group work with transgender clients followed by suggestions for group work with transgender clients from a social justice…

  12. Challenges Facing Group Work Online

    Science.gov (United States)

    Chang, Bo; Kang, Haijun

    2016-01-01

    Online group work can be complicated because of its asynchronous characteristics and lack of physical presence, and its requirements for skills in handling technology, human relationships, and content-related tasks. This study focuses on the administrative, logistical and relationship-related challenges in online group work. Challenges in areas…

  13. Discussion on enterprise technical standard management work

    International Nuclear Information System (INIS)

    Li Xinyou

    2010-01-01

    The technical standard management is an important part of enterprise information work, also the basis of enterprise standardization work. Only by rational and orderly management, can it exert maximum effectiveness, provide reliable support for the production and business of enterprise. (author)

  14. Crowdsourcing for Challenging Technical Problems - It Works!

    Science.gov (United States)

    Davis, Jeffrey R.

    2011-01-01

    The NASA Johnson Space Center Space Life Sciences Directorate (SLSD) and Wyle Integrated Science and Engineering (Wyle) will conduct a one-day business cluster at the 62nd IAC so that IAC attendees will understand the benefits of open innovation (crowdsourcing), review successful results of conducting technical challenges in various open innovation projects, and learn how an organization can effectively deploy these new problem solving tools to innovate more efficiently and effectively. Results from both the SLSD open innovation pilot program and the open innovation workshop conducted by the NASA Human Health and Performance Center will be discussed. NHHPC members will be recruited to participate in the business cluster (see membership http://nhhpc.nasa.gov) and as IAF members. Crowdsourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by the organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the SLSD, with the support of Wyle, established and implemented pilot projects in open innovation (crowdsourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, called Challenges by some open innovation service providers, and were then posted externally to seek solutions to these problems. In addition, an open call was issued internally to NASA employees Agency wide (11 Field Centers and NASA HQ) using an open innovation service provider crowdsourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external

  15. Working with Difficult Group Members.

    Science.gov (United States)

    Kottler, Jeffrey A.

    1994-01-01

    Describes types of group members who are challenging in group settings including entitled, manipulative, and character-disordered clients. Provides suggestions for working with these group members, either as isolated cases or as homogenous populations, emphasizing the protection of other clients' rights. Includes 31 references. (Author/CRR)

  16. First report of the Civil Nuclear Power Working Group to the Technical Comittee of the National Society for Clean Air -Summer 1988

    International Nuclear Information System (INIS)

    1988-01-01

    The accident at the Chernobyl reactor in April 1986 had serious consequences, not just for Russia but for many countries in Europe. Following the accident, the National Society for Clean Air formed a Working Group to look at the Society's policy on civil nuclear power. Its finding and recommendations are presented in this first report. The subject was considered under several headings - radioactivity (public education in measurement and dose evaluation), emergency procedures in the event of incidents overseas, radiation monitoring, a national monitoring and information service, plant safety, nuclear materials handling and radioactive waste disposal, energy policy and conservation. Four main recommendations are made on public education, risk assessment and radiation monitoring, radioactive waste disposal and energy policy. (U.K.)

  17. Metabolomics and Epidemiology Working Group

    Science.gov (United States)

    The Metabolomics and Epidemiology (MetEpi) Working Group promotes metabolomics analyses in population-based studies, as well as advancement in the field of metabolomics for broader biomedical and public health research.

  18. Group Work with Juvenile Delinquents.

    Science.gov (United States)

    Zimpfer, David G.

    1992-01-01

    Reviews group work literature on juvenile delinquents. Presents overview of interventions, including positive peer culture, cognitive-behavioral treatment, psychoeducational treatment, treatment of learned behavior, action-oriented treatment, milieu therapy, parental involvement, assertiveness training, and music therapy. Discusses outcome…

  19. Working group report: Neutrino physics

    Indian Academy of Sciences (India)

    olation. PACS No. 14.6.q. 1. Introduction. It was decided to cover a myriad of topics for discussion and work in the neu- trino physics working group, rather than restrict ourselves to any one focal theme. 269 ..... [8] Super-Kamiokande Collaboration: K Abe et al, Phys. Rev. Lett. 97, 171801 (2006), hep-ex/0607059.

  20. Annual report of the Summit Members' Working Group on Controlled Thermonuclear Fusion (Fusin Working Group (FWG))

    International Nuclear Information System (INIS)

    1987-04-01

    The Summit Members' Working Group on Controlled Thermonuclear Fusion [Fusion Working Group (FWG)] was established in 1983 in response to the Declaration of the Heads of State and Government at the Versailles Economic Summit meeting of 1982, and in response to the subsequent report of the Working Group in Technology, Growth and Employment (TGE) as endorsed at the Williamsburg Summit meeting, 1983. This document contains the complete written record of each of the three FWG meetings which include the minutes, lists of attendees, agendas, statements, and summary conclusions as well as the full reports of the Technical Working Party. In addition, there is a pertinent exchange of correspondence between FWG members on the role of the Technical Working Party and a requested background paper on the modalities associated with a possible future ETR project

  1. Summary of the Physics Opportunities Working Group

    International Nuclear Information System (INIS)

    Chen, Pisin; McDonald, K.T.

    1992-12-01

    The Physics Opportunities Working Group was convened with the rather general mandate to explore physic opportunities that may arise as new accelerator technologies and facilities come into play. Five topics were considered during the workshop: QED at critical field strength, novel positron sources, crystal accelerators, suppression of beamstrahlung, and muon colliders. Of particular interest was the sense that a high energy muon collider might be technically feasible and certainly deserves serious study

  2. NEANSC Working Group on international evaluation cooperation

    International Nuclear Information System (INIS)

    Larson, D.C.; Nordborg, C.; Dunford, C.L.

    1992-01-01

    In the last three years, several newly evaluated nuclear data libraries have been released. Japan completed JENDL-3 in late 1989, JEF-2/EFF-2 was completed by Europe in 1991, and ENDF/B-VI was completed by the US in 1989. With the support of the NEACRP and the NEANDC, (recently combined into the NEA Nuclear Science Committee NEANSC), a Working Group was formed in 1989 to promote cooperative activities among the evaluation groups in OECD countries. Technical activities of the Working Group are carried out by subgroups formed to carry out specific investigations. Seven subgroups are currently active, with four more initiated by the Working Group at its meeting in May 1991. Brief descriptions of current subgroup activities are given

  3. Assays for Qualification and Quality Stratification of Clinical Biospecimens Used in Research: A Technical Report from the ISBER Biospecimen Science Working Group.

    Science.gov (United States)

    Betsou, Fay; Bulla, Alexandre; Cho, Sang Yun; Clements, Judith; Chuaqui, Rodrigo; Coppola, Domenico; De Souza, Yvonne; De Wilde, Annemieke; Grizzle, William; Guadagni, Fiorella; Gunter, Elaine; Heil, Stacey; Hodgkinson, Verity; Kessler, Joseph; Kiehntopf, Michael; Kim, Hee Sung; Koppandi, Iren; Shea, Katheryn; Singh, Rajeev; Sobel, Marc; Somiari, Stella; Spyropoulos, Demetri; Stone, Mars; Tybring, Gunnel; Valyi-Nagy, Klara; Van den Eynden, Gert; Wadhwa, Lalita

    2016-10-01

    This technical report presents quality control (QC) assays that can be performed in order to qualify clinical biospecimens that have been biobanked for use in research. Some QC assays are specific to a disease area. Some QC assays are specific to a particular downstream analytical platform. When such a qualification is not possible, QC assays are presented that can be performed to stratify clinical biospecimens according to their biomolecular quality.

  4. CFCC working group meeting: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This report is a compilation of the vugraphs presented at this meeting. Presentations covered are: CFCC Working Group; Overview of study on applications for advanced ceramics in industries for the future; Design codes and data bases: The CFCC program and its involvement in ASTM, ISO, ASME, and military handbook 17 activities; CFCC Working Group meeting (McDermott Technology); CFCC Working Group meeting (Textron); CFCC program for DMO materials; Developments in PIP-derived CFCCs; Toughened Silcomp (SiC-Si) composites for gas turbine engine applications; CFCC program for CVI materials; Self-lubricating CFCCs for diesel engine applications; Overview of the CFCC program`s supporting technologies task; Life prediction methodologies for CFCC components; Environmental testing of CFCCs in combustion gas environments; High-temperature particle filtration ORNL/DCC CRADA; HSCT CMC combustor; and Case study -- CFCC shroud for industrial gas turbines.

  5. 77 FR 9265 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2012-02-16

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Adaptive Management Work Group (AMWG) makes recommendations to the Secretary of the Interior concerning.... L. 102-575) of 1992. The AMP includes a Federal advisory committee, the AMWG, a technical work group...

  6. 78 FR 7810 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2013-02-04

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Adaptive Management Work Group (AMWG) makes recommendations to the Secretary of the Interior concerning..., the AMWG, a technical work group (TWG), a Grand Canyon Monitoring and Research Center, and independent...

  7. 78 FR 21415 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2013-04-10

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Adaptive Management Work Group (AMWG) makes recommendations to the Secretary of the Interior concerning... Federal advisory committee, the AMWG, a technical work group, a Grand Canyon Monitoring and Research...

  8. 77 FR 22801 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2012-04-17

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group...). SUMMARY: The Glen Canyon Dam Adaptive Management Work Group (AMWG) makes recommendations to the Secretary..., the AMWG, a technical work group, a Grand Canyon Monitoring and Research Center, and independent...

  9. 76 FR 24516 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2011-05-02

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Adaptive Management Work Group (AMWG) makes recommendations to the Secretary of the Interior concerning..., the AMWG, a technical work group (TWG), a Grand Canyon Monitoring and Research Center, and independent...

  10. CEC natural analogue working group

    International Nuclear Information System (INIS)

    Come, B.; Chapman, N.A.

    1986-01-01

    The second meeting of the CEC Natural Analogue Working Group took place on June 17-19, 1986, hosted by the Swiss NAGRA in Interlaken (CH). A review of recent progress in natural analogue programmes was carried out, and complemented by detailed discussions about geomicrobiology, archaeological analogues, natural colloids, and use of analogues to increase confidence in safety assessments for radioactive waste disposal. A statement drafted by the Group, and the presentations made, are put together in this report

  11. Working group report: Collider Physics

    Indian Academy of Sciences (India)

    11KEK, Tsukuba, Japan. 12Cornell University ... This is summary of the activities of the working group on collider physics in the IXth ... In view of the requirements of the hour and the available skills and interests, it was decided to .... The actual computation, which is long and somewhat tedious, is currently under way and is ...

  12. Group Work with Abusive Parents.

    Science.gov (United States)

    Kruger, Lois; And Others

    1979-01-01

    Social work students conclude from an experience that parents can consider alternative means of disciplining children when they participate in a parent group that is comfortable and when attendance is promoted by provision of tangible services. Parents achieved increased sense of self-worth and learned appropriate ways of expressing anger. (Author)

  13. CEC Natural Analogue Working Group

    International Nuclear Information System (INIS)

    Come, B.; Chapman, N.A.

    1989-01-01

    The central theme for the third meeting of the CEC analogue working group was ''How can analogue data be used for performance assessments, both in support of the results and for presentation to the public''. This report puts together the most recent achievements in this field, together with a review of on-going natural analogue programmes

  14. Characterization and management of radioactive sodium and other reactor components as input data for the decommissioning of liquid metal-cooled fast reactors. A compilation of data produced of data produced by members of the IAEA technical working group on fast reactors (TWG-FR) at two consultancies and one technical committee meeting. Working material

    International Nuclear Information System (INIS)

    2002-01-01

    A number of liquid metal cooled fast reactors (LMFRs) are in operation and, some have already been shut down; other reactors will reach the end of their design lifetime in a few years and become candidates for decommissioning. It is unfortunate that little consideration was devoted to decommissioning of reactors at the plant design and construction stage. It is with this focus that the Technical Working Group on Fast Reactors (TWGFR) recommended that the IAEA organize the exchange of information on LMFRs decommissioning technology. It was pointed out that the decommissioning of small sodium-cooled reactors has shown that there are two basic differences between thermal and fast reactors decommissioning: on the one side, the treatment and disposal of radioactive sodium coolant, and on the other side, the management of reactor components, for which the structural materials are activated in depth by fast neutrons. To this end, a Technical Committee Meeting on Sodium Removal and Disposal from LMFRs in Normal Operation and in the framework of Decommissioning (Aix-en-Provence, France, November 1997) and two Consultancies on Decommissioning of the Kazakh BN-350 LMFR (Vienna, Austria, October 1996; Obninsk, Russian Federation, February 1998) were convened by the IAEA. These Meetings brought together a group of experts from France, Russia, Kazakhstan, the UK, and the USA to exchange information on, and to review current technical knowledge and experience in the management of radioactive coolant and reactor components following closing of LMFRs, as well as their design features and operating experience relevant for decommissioning procedures. The report provides general and detailed information on activation characteristics of the primary coolant; treatment and disposal of the spent sodium; removal of the residual sodium deposits and decontamination; the activation characteristics of the reactor components and the management of the latter. The recurring theme is finding

  15. The FORATOM Transport Working Group

    International Nuclear Information System (INIS)

    Lehmann, P.

    2000-01-01

    Based in Brussels, the European atomic forum FORATOM is the trade association of the European nuclear industry which was established in the early 1960s to promote nuclear power and to facilitate relations with the European institutions. One of the main mechanisms which FORATOM uses, in its dealings with the European Commission and other international organisations, is the involvement of several working groups bringing together groups of experts drawn from the industrial companies in order to identify the issues and to develop the widest possible common views on which the industry must express its representative, substantial and deliverable opinion. The Transport Working Group (TWG) has the objective of dealing with transport of radioactive material, especially nuclear materials. The TWG usually meets three times a year in Brussels or another selected location. It has strong links with the European Commission which are evidenced by the fact that it officially represents the European nuclear industry, with the status of observer, at the meetings of the Standing Working Group on Safe Transport of Radioactive Material which was set up in 1982, upon a request of the European Parliament, to advise the European Commission in the field of safe transport of radioactive materials. The Standing Working Group (SWG) assists the European Union's Member States in the revision process of IAEA recommendations and helps a correct and harmonious application of these recommendations within the European Union. In previous years, the Standing Working Group has proposed over 40 different studies, financed by the European Commission, on important transport issues. The FORATOM TWG encourages its member organisations to participate in studies proposed by the Commission and has been cooperating for many years with the Commission in the field of many studies aimed to improve the application of transport regulations. The need to maintain the safe and reliable operation of plants that generate

  16. Spent Fuel Working Group Report

    International Nuclear Information System (INIS)

    O'Toole, T.

    1993-11-01

    The Department of Energy is storing large amounts of spent nuclear fuel and other reactor irradiated nuclear materials (herein referred to as RINM). In the past, the Department reprocessed RINM to recover plutonium, tritium, and other isotopes. However, the Department has ceased or is phasing out reprocessing operations. As a consequence, Department facilities designed, constructed, and operated to store RINM for relatively short periods of time now store RINM, pending decisions on the disposition of these materials. The extended use of the facilities, combined with their known degradation and that of their stored materials, has led to uncertainties about safety. To ensure that extended storage is safe (i.e., that protection exists for workers, the public, and the environment), the conditions of these storage facilities had to be assessed. The compelling need for such an assessment led to the Secretary's initiative on spent fuel, which is the subject of this report. This report comprises three volumes: Volume I; Summary Results of the Spent Fuel Working Group Evaluation; Volume II, Working Group Assessment Team Reports and Protocol; Volume III; Operating Contractor Site Team Reports. This volume presents the overall results of the Working Group's Evaluation. The group assessed 66 facilities spread across 11 sites. It identified: (1) facilities that should be considered for priority attention. (2) programmatic issues to be considered in decision making about interim storage plans and (3) specific vulnerabilities for some of these facilities

  17. Working Group Report: Quantum Chromodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J. M. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2013-10-18

    This is the summary report of the energy frontier QCD working group prepared for Snowmass 2013. We review the status of tools, both theoretical and experimental, for understanding the strong interactions at colliders. We attempt to prioritize important directions that future developments should take. Most of the efforts of the QCD working group concentrate on proton-proton colliders, at 14 TeV as planned for the next run of the LHC, and for 33 and 100 TeV, possible energies of the colliders that will be necessary to carry on the physics program started at 14 TeV. We also examine QCD predictions and measurements at lepton-lepton and lepton-hadron colliders, and in particular their ability to improve our knowledge of strong coupling constant and parton distribution functions.

  18. Radiation sources working group summary

    International Nuclear Information System (INIS)

    Fazio, M.V.

    1998-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, components technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigation, and phenomena that impact source design such as fatigue in resonant structures due to RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations

  19. Technical aspects of the integration of three-dimensional treatment planning dose parameters (GEC-ESTRO Working Group) into pre-implant planning for LDR gynecological interstitial brachytherapy.

    Science.gov (United States)

    Chi, A; Gao, M; Nguyen, N P; Albuquerque, K

    2009-06-01

    This study investigates the technical feasibility of pre-implant image-based treatment planning for LDR GYN interstitial brachytherapy(IB) based on the GEC-ESTRO guidelines. Initially, a virtual plan is generated based on the prescription dose and GEC-ESTRO defined OAR dose constraints with a pre-implant CT. After the actual implant, a regular diagnostic CT was obtained and fused with our pre-implant scan/initial treatment plan in our planning software. The Flexi-needle position changes, and treatment plan modifications were made if needed. Dose values were normalized to equivalent doses in 2 Gy fractions (LQED 2 Gy) derived from the linear-quadratic model with alpha/beta of 3 for late responding tissues and alpha/beta of 10 for early responding tissues. D(90) to the CTV, which was gross tumor (GTV) at the time of brachytherapy with a margin to count for microscopic disease, was 84.7 +/- 4.9% of the prescribed dose. The OAR doses were evaluated by D(2cc) (EBRT+IB). Mean D(2cc) values (LQED(2Gy)) for the rectum, bladder, sigmoid, and small bowel were the following: 63.7 +/- 8.4 Gy, 61.2 +/- 6.9 Gy, 48.0 +/- 3.5 Gy, and 49.9 +/- 4.2 Gy. This study confirms the feasibility of applying the GEC-ESTRO recommended dose parameters in pre-implant CT-based treatment planning in GYN IB. In the process, this pre-implant technique also demonstrates a good approximation of the target volume dose coverage, and doses to the OARs.

  20. Report for Working Group 2

    DEFF Research Database (Denmark)

    Bjerregaard Jensen, Lotte; Thompson, Mary Kathryn

    2013-01-01

    The theme for the second working group was design education in civil and environmental engineering. Issues discussed during this meeting included the current state of the art of civil design education, the importance of civil design education, tools and techniques that can be used to build design...... competencies, the importance of balancing hard and soft skills, and the role that culture and context play and will continue to play in civil design in the future....

  1. Historic Radio Astronomy Working Group

    Science.gov (United States)

    2007-06-01

    This special issue of Astronomische Nachrichten contains the proceedings of a session of the Historic Radio Astronomy Working Group of the International Astronomical Union that took place during the 26th General Assembly of the IAU in Prague on 17th August 2006. In addition to the talks presented in Prague some contributions were solicited to give a more complete overview of `The Early History of European Radio Astronomy'.

  2. Optimal maintenance work organization and technical education

    International Nuclear Information System (INIS)

    Toshiro Kitamura

    2005-01-01

    Under Japanese multi-layered maintenance routines, almost 100% of work is delegated to outside contractors. For taking such form, there are several reasons unique to Japan. U.S. maintenance work organization makes a contrast, reducing the volume of subcontract in these past ten years. On the other hand, France has a trend of increasing the volume of subcontract for cost reduction that is expected in liberalization and privatization. In Japan, since the subcontract went too far, there is a trend that the multi-layered subcontract structure will be relieved. The Japan Atomic Power, Inc., has organized a team that performs a part of maintenance work by employees themselves since three years before. Direct work is effective to greatly supporting the employees' technical ability. It is expected that the quality of subcontract management will be markedly improved from now on. (author)

  3. Euratom Neutron Radiography Working Group

    DEFF Research Database (Denmark)

    Domanus, Joseph Czeslaw

    1986-01-01

    reactor fuel as well as establish standards for radiographic image quality of neutron radiographs. The NRWG meets once a year in each of the neutron radiography centers to review the progress made and draw plans for the future. Besides, ad-hoc sub-groups or. different topics within the field of neutron......In 1979 a Neutron Radiography Working Group (NRWG) was constituted within Buratom with the participation of all centers within the European Community at which neutron facilities were available. The main purpose of NRWG was to standardize methods and procedures used in neutron radiography of nuclear...... radiography are constituted. This paper reviews the activities and achievements of the NRWG and its sub-groups....

  4. State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

    International Nuclear Information System (INIS)

    Schwantes, J.M.; Pellegrini, K.L.; Marsden, Oliva

    2017-01-01

    The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques were applied to ITWG exercises for the first time. An objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided. (author)

  5. State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

    International Nuclear Information System (INIS)

    Schwantes, Jon M.; Marsden, Oliva; Pellegrini, Kristi L.

    2016-01-01

    The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Moreover, exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques were applied to ITWG exercises for the first time. We performed an objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided.

  6. Working Group Report: Higgs Boson

    Energy Technology Data Exchange (ETDEWEB)

    Dawson, Sally; Gritsan, Andrei; Logan, Heather; Qian, Jianming; Tully, Chris; Van Kooten, Rick [et al.

    2013-10-30

    This report summarizes the work of the Energy Frontier Higgs Boson working group of the 2013 Community Summer Study (Snowmass). We identify the key elements of a precision Higgs physics program and document the physics potential of future experimental facilities as elucidated during the Snowmass study. We study Higgs couplings to gauge boson and fermion pairs, double Higgs production for the Higgs self-coupling, its quantum numbers and $CP$-mixing in Higgs couplings, the Higgs mass and total width, and prospects for direct searches for additional Higgs bosons in extensions of the Standard Model. Our report includes projections of measurement capabilities from detailed studies of the Compact Linear Collider (CLIC), a Gamma-Gamma Collider, the International Linear Collider (ILC), the Large Hadron Collider High-Luminosity Upgrade (HL-LHC), Very Large Hadron Colliders up to 100 TeV (VLHC), a Muon Collider, and a Triple-Large Electron Positron Collider (TLEP).

  7. Summary muon detection working group

    International Nuclear Information System (INIS)

    Stanton, N.R.

    1993-01-01

    The areas of concentration of the Muon Working Group reflected its composition: about half of the group was interested primarily is extending the capability of existing general purpose colliders (CDF, D0). Smaller numbers of people were interested in B physics with general purpose colliders at the SSC and LHC, with SSC fixed target experiments, and with dedicated forward colliders. Good muon tagging, and possibly also muon triggering, is essential for studying CP violation in B i →J/ψX, J/ψ→μ + μ - ; as a flavor tag, with the semimuonic decay B→μ + X or bar B→μ - X tagging the flavor of the partner; for studying the physics of the semimuonic B decays themselves; and for looking for really rare decays like B→μ + μ -

  8. Working group 8: inspection tools

    Energy Technology Data Exchange (ETDEWEB)

    Billey, Deb; Kania, Richard; Nickle, Randy; Wang, Rick; Westwood, Stephen

    2011-07-01

    This eighth working group of the Banff 2011 conference discussed the inspection tools and techniques used by the upstream and downstream pipeline industry to evaluate pipeline integrity. Special attention was given to the challenges and successes related to in-line inspection (ILI) technology. The background of current dent assessment criteria in B31.8 was presented, including dent definition for ILI vendors and pipeline operators as well as codes (CSA Z662 and B31.8). The workshop described examples of dents and assessments showing inconsistency with current criteria as set out by TCPL and Marathon. This workshop produced a single, industry-wide definition of the dent. It was found that the strain based criteria were more practical because depth based is conservative and may miss shallow occurrences. The creation of joint industry group was proposed to develop strain based criteria for incorporation into CSAZ662 and B31.8.

  9. State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

    Energy Technology Data Exchange (ETDEWEB)

    Schwantes, Jon M.; Marsden, Oliva; Pellegrini, Kristi L.

    2016-09-16

    Founded in 1996 upon the initiative of the “Group of 8” governments (G8), the Nuclear Forensics International Technical Working Group (ITWG) is an ad hoc organization of official nuclear forensics practitioners (scientists, law enforcement, and regulators) that can be called upon to provide technical assistance to the global community in the event of a seizure of nuclear or radiological materials. The ITWG is supported by and is affiliated with roughly 40 countries and international partner organizations including the International Atomic Energy Agency (IAEA), EURATOM, INTERPOL, EUROPOL, and the United Nations Interregional Crime and Justice Research Institute (UNICRI). Besides providing a network of nuclear forensics laboratories that are able to assist law enforcement during a nuclear smuggling event, the ITWG is also committed to the advancement of the science of nuclear forensic analysis, largely through participation in periodic table top and Collaborative Materials Exercises (CMXs). Exercise scenarios use “real world” samples with realistic forensics investigation time constraints and reporting requirements. These exercises are designed to promote best practices in the field and test, evaluate, and improve new technical capabilities, methods and techniques in order to advance the science of nuclear forensics. The ITWG recently completed its fourth CMX in the 20 year history of the organization. This was also the largest materials exercise to date, with participating laboratories from 16 countries or organizations. Three samples of low enriched uranium were shipped to these laboratories as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. An objective review of the State Of Practice and Art of international nuclear forensic analysis based upon the outcome of this most recent exercise is provided.

  10. Mixed Waste Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    The treatment of mixed waste remains one of this country's most vexing environmental problems. Mixed waste is the combination of radioactive waste and hazardous waste, as defined by the Resource Conservation and Recovery Act (RCRA). The Department of Energy (DOE), as the country's largest mixed waste generator, responsible for 95 percent of the Nation's mixed waste volume, is now required to address a strict set of milestones under the Federal Facility Compliance Act of 1992. DOE's earlier failure to adequately address the storage and treatment issues associated with mixed waste has led to a significant backlog of temporarily stored waste, significant quantities of buried waste, limited permanent disposal options, and inadequate treatment solutions. Between May and November of 1993, the Mixed Waste Working Group brought together stakeholders from around the Nation. Scientists, citizens, entrepreneurs, and bureaucrats convened in a series of forums to chart a course for accelerated testing of innovative mixed waste technologies. For the first time, a wide range of stakeholders were asked to examine new technologies that, if given the chance to be tested and evaluated, offer the prospect for better, safer, cheaper, and faster solutions to the mixed waste problem. In a matter of months, the Working Group has managed to bridge a gap between science and perception, engineer and citizen, and has developed a shared program for testing new technologies

  11. Clean Energy Works Oregon Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Andria [City of Portland; Cyr, Shirley [Clean Energy Works

    2013-12-31

    In April 2010, the City of Portland received a $20 million award from the U.S. Department of Energy, as part of the Energy Efficiency and Conservation Block Grant program. This award was appropriated under the American Recovery and Reinvestment Act (ARRA), passed by President Obama in 2009. DOE’s program became known as the Better Buildings Neighborhood Program (BBNP). The BBNP grant objectives directed the City of Portland Bureau of Planning and Sustainability (BPS) as the primary grantee to expand the BPS-led pilot program, Clean Energy Works Portland, into Clean Energy Works Oregon (CEWO), with the mission to deliver thousands of home energy retrofits, create jobs, save energy and reduce carbon dioxide emissions.The Final Technical Report explores the successes and lessons learned from the first 3 years of program implementation.

  12. WICCI Wildlife Working Group Report

    Science.gov (United States)

    LeDee, Olivia E.; Hagell, Suzanne; Martin, K.; McFarland, David; Meyer, Michael; Paulios, Andy; Ribic, Christine A.; Sample, D.; Van Deelen, Timothy R.

    2013-01-01

    Wisconsin is world-renowned for its diversity of ecological landscapes and wildlife populations.  The northern forests, southern prairies, and interior and coastal wetlands of the state are home to more than 500 terrestrial animal species.  These animals supply the Wisconsin public with aesthetic, cultural, and economic benefits; our identity and economy are intertwined with these natural resources.  Climate change is altering the behavior, distribution, development, reproduction, and survival of these animal populations.  In turn, these changes will alter the aesthetic, cultural, and economic benefits we receive from them.  The focus of the Wildlife Working Group is to document past and current impacts, anticipate changes in wildlife distribution and abundance, and develop adaptation strategies to maintain the vitality and diversity of Wisconsin's wildlife populations.

  13. Nonaccelerator physics working group summary

    International Nuclear Information System (INIS)

    Ayres, D.S.; Beier, E.W.; Cherry, M.L.; Marciano, W.J.

    1986-01-01

    The Nonaccelerator Physics Working Group set itself the task of predicting the contributions of nonaccelerator experiments to particle physics during the 1990s, in order to assess the needs for new experimental facilities. The main topics studied by the subgroups were: (1) the possibility of doing particle physics experiments with high energy cosmic rays from astrophysical sources; (2) the prospects for experiments which seek to measure the masses of neutrinos and the mixing of neutrino flavors; (3) an examination of the implications for proton decay of recent theoretical developments in grand unified and string theories. Other topics included a survey of magnetic monopole searches, an assessment of future prospects for double-beta-decay and nucleon-decay experiments, and a review of recent progress on neutrino and dark-matter detectors based on quasiparticles in superconductors and phonons in crystals

  14. Theoretical Issues in Clinical Social Group Work.

    Science.gov (United States)

    Randall, Elizabeth; Wodarski, John S.

    1989-01-01

    Reviews relevant issues in clinical social group practice including group versus individual treatment, group work advantages, approach rationale, group conditions for change, worker role in group, group composition, group practice technique and method, time as group work dimension, pretherapy training, group therapy precautions, and group work…

  15. Working group report on agriculture

    International Nuclear Information System (INIS)

    Stewart, B.

    1991-01-01

    A summary is provided of the results from a working group investigating the implications of climatic change on agriculture in the Great Plains. The group investigated the current state of knowledge concerning basic understanding of climatic impacts, scales of analysis, impact model validation, lack of integrated modelling, and incomplete and incompatible data sets. Basic understanding of current spatial and temporal climatic variability and its impacts and implications for agricultural production, land resource sustainability, and farm management decisions is imprecise. There is little understanding of the magnitude of potential longer-term changes, timing, likely regional changes, or probability of change. Most models are unvalidated, and knowledge of potential carbon dioxide enrichment effects on crops is very uncertain and the effects are poorly understood. Research should be expanded to develop a better understanding of the critical thresholds and sensitivity of Great Plains agricultural production and economic systems. Holistic methodology should be implemented to integrate weather and climatic information with crop and environmental processes, farm level decision making, and local and regional economic conditions

  16. Making Cooperative Learning Groups Work.

    Science.gov (United States)

    Hawley, James; De Jong, Cherie

    1995-01-01

    Discusses the use of cooperative-learning groups with middle school students. Describes cooperative-learning techniques, including group roles, peer evaluation, and observation and monitoring. Considers grouping options, including group size and configuration, dyads, the think-pair-share lecture, student teams achievement divisions, jigsaw groups,…

  17. Working group report on forestry

    International Nuclear Information System (INIS)

    MacIver, D.

    1991-01-01

    The results and conclusions of a working group held to discuss the state of knowledge and information needs concerning potential climate change implications for forestry are presented. The lack of knowledge in some basic processes, for example physiological and genetics, limits ability to evaluate and project the adaptation and responses to climate change. Areas where knowledge is weak include: the potential maximum productivity for a given climate region; the extent to which climate change can be accomodated by genetic adaptation; ways to improve the temporal/spatial distribution of projected precipitation and temperature changes and their magnitudes; the effect of global warming on fire severity and behavior; the current lightning distribution and relationship to fire and the response of this to global warming; socio-economic needs and constraints for management of wilderness areas; carbon dioxide enrichment effects on forest growth and water use efficiency; carbon benefits associated with afforestation and other carbon sequestering programs; impacts of forest practices on the carbon cycle; and the definition of biological diversity on the Great Plains. Recommended research initiatives include improving climate projections, targetted biological process research, monitoring for change and adaptive management, and development of decision support systems

  18. Working group report: Quantum chromodynamics

    Indian Academy of Sciences (India)

    3NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam, The Netherlands. 4Harish-Chandra Research Institute, Chhatnag Road, Jhusi, Allahabad 211 ... tant to extend the resummation framework to polarised process to look at polarised.

  19. Report of PR working group

    International Nuclear Information System (INIS)

    Hirabayashi, H.; Hosoyama, K.; Kamata, S.

    1984-01-01

    Among various technical problems on the proton ring which might be installed in the TRISTAN ring, those concerning the superconducting magnets are discussed. As for the copper stabilized NbTi alloy magnets, the authors are now developing a 5m long, 5T, full-size dipole magnet based on experiences with the production and operational performance of a series of dipoles with 1 m long coils. The full-size dipole will be assembled and installed in a horizontal crystal together with a two-phase forced-cooling system within several months. On the other hand, a dipole magnet with a central field of 10 T using a NaTi/(Ta)/Cu conductor cooled in pressurized superfluid helium is now under development at KEK partly supported by the Japan-U.S. cooperative program in high energy physics. The stress in the collars and coils has been analyzed in detail by the finite element method. The stress contour lines in the outer collars are presented in the figure. Also discussed are the basic problems in the application of Nb 3 Sn/Cu wires and cables to the high-field accelerator magnets. As a result of the developments at KEK, the following requirements for high-field superconducting accelerator magnet coils became apparent: The overall coil current density should be improved to the level of at least 400 A/mm 2 at 10T in either the case of the NbTi(Ta)/Cu coil cooled at 1.8K or the Nb 3 Sn/Cu coil at 4.2K: Suitable insulation material such as ceramics, having a higher young's modulus and capable of withstanding large stress loads of the order of 200 MPa, should be studied. (Aoki, K.)

  20. Social Maturation: Work Group Proceedings.

    Science.gov (United States)

    Resnick, Michael D.; And Others

    1985-01-01

    Each of the seven factors that affect adolescent social development is presented together with a description of potentially important research, service, and policy initiatives within each topic area. The factors are self-esteem, peer group, parenting, family, services, enforced dependency, and positive sexual socialization. (CT)

  1. Harmonization of the licensing process for digital instrumentation and control systems in nuclear power plants. Report prepared within the framework of the Technical Working Group on Nuclear Power Plant Control and Instrumentation

    International Nuclear Information System (INIS)

    2002-12-01

    This report was prepared in response to the recommendation of the Technical Working Group on Nuclear Power Plant Control and Instrumentation (TWG-NPPCI). This recommendation was based on the recognition of the present diversity in national practices in licensing digital Instrumentation and control (I and C). The goal of this report is to promote harmonization of I and C licensing requirements in the Member States. It applies to I and C modernization, retrofits, upgrades, replacement, new installation, and other aspects of digital I and C in both existing and new nuclear power plants. It should be pointed out that a single publication, like this report, can only take the first step towards initiating a process leading to licensing requirements, which are more harmonized. It is therefore hoped that that this report will get a broad readership among those who can influence requirements that are set on digital I and C. This report provides general and high level recommendations to assist senior officials at utilities, vendor organizations, regulatory bodies, and their support organizations who are involved in the licensing of digital I and C. It is also intended to be read by persons participating in technical committees which are writing standards. The authors of this report believe that harmonization can be achieved through a consideration of the technical and scientific basis of high integrity digital I and C systems. It is also believed that many benefits can be reached in resolving various issues of a technical and engineering nature, which presently are creating controversies in the licensing of digital I and C in NPP safety applications. This publication is based on a consideration of the licensing process of I and C in a top down fashion to discuss generic principles to be applied when assessing digital I and C in NPP safety applications. This report gives an overview of the confidence building process in which evidence is created that digital I and C fulfils

  2. Information integration in control rooms and technical offices in nuclear power plants. Report prepared within the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation

    International Nuclear Information System (INIS)

    2001-11-01

    The majority of the nuclear power plants in the world were designed 25 to 45 years ago. The information, instrumentation, safety, and control systems in these plant designs were based on analog, relay, and primitive digital technology. Computers that were available when most of the nuclear power plants were built were unsophisticated compared with those currently available. These less powerful machines with limited computational capabilities and memory were used to collect and store information. The main means for obtaining information from the plant were analog meters and strip chart recorders. In many cases these pieces of data had to be integrated and correlated with other data manually, in order to be usable. Procedures and plant information resided on paper only and were frequently hard to find and access in a timely manner. This report provides guidance to help with the integration of information in order to enhance the usability and usefulness of the information. It can also be used to help avoid the pitfalls that can occur when implementing new systems with respect to the information they need and produce. This reports philosophy is based on three important issues that allow the convenient structuring of the problem and to keep all of its important features. The first issue is the process of information systems integration and use. This is achieved by long term planning and the creation of the plant infrastructure plan. The second is to take care of the end users' needs in relation to their abilities. This is realized through analyses of user needs. Third is the design of the human-system interface (HSI), for example to distinguish between types of information for use in the plant control room and in technical offices. The development of this report was initiated by the IAEA International Working Group on Nuclear Power Plant Control and Instrumentation (IWG-NPPCI). It is a logical follow-up to IAEA-TECDOC-1016, Modernization of Instrumentation and Control

  3. Solutions for cost effective assessment of software based instrumentation and control systems in nuclear power plants. Report prepared within the framework of the Technical Working Group on Nuclear Power Plant Control and Implementation

    International Nuclear Information System (INIS)

    2002-12-01

    The introduction of software based instrumentation and control (I and C) systems for use in nuclear power plants, mainly due to I and C modernization activities, has raised many issues of safety and economics. Many of these issues have been raised in the IAEA Technical Working Group on Nuclear Power Plant Control and Instrumentation (TWG-NPPCI) meetings and by other organizations, such as the OECD and the European Commission. One increasingly important issue is the need for engineering solutions to justify them for the cost effective assessment and deployment of software based I and C systems. To address this important issue, the IAEA put together the Co-ordinated Research Project (CRP) on Solutions for Cost Effective Assessments of Software based I and C Systems. The overall objective of the project is to facilitate the cost effective assessment of software based I and C systems in nuclear power plants. This is necessary to address obsolescence issues, to introduce new beneficial functionality, and to improve overall performance. The engineering solutions developed in this CRP will contribute to this overall objective. The objective of the CRP was reached through co-ordinated research and collected experience in the areas of project management; requirements specifications; use of software explicitly designed for nuclear applications, use of commercial off the shelf (COTS) products, generic pre-qualification of systems and components; safety and reliability enhancements; verification and validation; and licensing impact. This TECDOC is the result of the research and collected experience put together under this CRP. The CRP participants gave presentations on their work performed as part of this CRP at the various meetings of the group. The first meeting of the CRP was held in Vienna on 8-12 November 1999 in which the participants developed the objectives, scope, and outline of this report. The second meeting was held in Halden, Norway on 4-8 December 2000 and the

  4. Annual report of the Summit Members' Working Group on Controlled Thermonuclear Fusion (Fusin Working Group (FWG))

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1987-04-01

    The Summit Members' Working Group on Controlled Thermonuclear Fusion (Fusion Working Group (FWG)) was established in 1983 in response to the Declaration of the Heads of State and Government at the Versailles Economic Summit meeting of 1982, and in response to the subsequent report of the Working Group in Technology, Growth and Employment (TGE) as endorsed at the Williamsburg Summit meeting, 1983. This document contains the complete written record of each of the three FWG meetings which include the minutes, lists of attendees, agendas, statements, and summary conclusions as well as the full reports of the Technical Working Party. In addition, there is a pertinent exchange of correspondence between FWG members on the role of the Technical Working Party and a requested background paper on the modalities associated with a possible future ETR project.

  5. Post-Disaster Social Justice Group Work and Group Supervision

    Science.gov (United States)

    Bemak, Fred; Chung, Rita Chi-Ying

    2011-01-01

    This article discusses post-disaster group counseling and group supervision using a social justice orientation for working with post-disaster survivors from underserved populations. The Disaster Cross-Cultural Counseling model is a culturally responsive group counseling model that infuses social justice into post-disaster group counseling and…

  6. WWW-based environments for collaborative group work

    NARCIS (Netherlands)

    Collis, Betty

    1998-01-01

    Since 1994, we have been involved in the design and use of a series of WWW-based environments to support collaborative group work for students in a technical university in The Netherlands. These environments, and the course re-design that accompanies each new environment, began in April 1994 and

  7. [A study of the occupational stress norm and it' s application for the technical group and scientific research group].

    Science.gov (United States)

    Yang, Xin-wei; Liu, Ze-jun; Zhao, Pei-qing; Bai, Shao-ying; Pang, Xing-huo; Wang, Zhi-ming; Jin, Tai-yi; Lan, Ya-jia

    2006-11-01

    A study of the occupational stress norm and it' s application for the technical group and scientific research group. In this study, cross-sectional study method is used, and a synthetic way of sorting and randomized sampling is adopted to deal with research targets(235 scientific research group, 857 technical group). Descriptive statistics for OSI-R scale scores for the technical group and scientific research group were modulated. Scale raw score to T-score conversion tables derived from the OSI-R normative sample for technical group and scientific research group were established. OSI-R profile from for technical group and scientific research group were established. For the ORQ and PSQ scales, scores at or above 70T indicate a strong levels of maladaptive stress and strain. Score in the range of 60T to 69T suggest middle levels of maladaptive stress and strain. Score in the range of 40T to 59T indicate normal levels of stress and strain. Score below 40T indicate a relative absence of occupational stress and strain. For the PRQ scales, score below 30T indicate a significant lack of coping resources. Score in the range of 30T to 39T suggest middle deficits in coping resources. Score in the range of 40T to 59T indicate average coping resources. Scores at or above 60T indicate a strong levels of coping resources. Different intervention measure should be take to reduce the occupational stress so as to improve the work ability.

  8. Management of life cycle and ageing at nuclear power plants: Improved I and C maintenance. Report prepared within the framework of the Technical Working Group on Nuclear Power Plant Control and Instrumentation

    International Nuclear Information System (INIS)

    2004-08-01

    The topic of this TECDOC was originally suggested in the May 2001 meeting of the IAEA Technical Working Group on Nuclear Power Plant Control and Instrumentation (TWG NPPCI). It was then approved by the IAEA for work to begin in 2002. It originated from the remarks of the TWG members that it is now time to address the instrumentation and control (I and C) ageing issues in terms of plant life management and licence renewal. Furthermore, the nuclear industry is believed to be able to survive only if plant economy is favourable in addition to plant safety. Therefore, in dealing with I and C ageing and obsolescence, one has to consider how to proceed in addressing this question, not only from a plant operational and safety standpoint, but also in the context of plant economy in terms of the cost of electricity production, and including initial and recurring capital costs. For this important reason, consideration of new technologies, such as on-line monitoring and in situ testing methods is recommended. These can be used not only to predict the consequences of ageing, and guard against it, but also to verify equipment performance throughout the lifetime of the plant, and help establish replacement schedules for I and C equipment, and predict residual life. The basic ageing and obsolescence management process involves: Understanding the ageing and obsolescence phenomena and identifying the (potential) effects on I and C; Addressing the specific impact of these effects on the plant taking into account operational profiles and analyzing the risks; Carrying out necessary mitigating actions to counteract the effects of ageing and obsolescence. Based on the above listed activities the ageing and obsolescence management programme needs to be an iterative process. The goal of this TECDOC is to provide the latest information on ageing, obsolescence, and performance monitoring of those I and C equipment that are classified as safety equipment and/or safety-related equipment, are

  9. AER Working Group B activities in 2001

    International Nuclear Information System (INIS)

    Darilek, P.

    2001-01-01

    Review of AER Working Group B Meeting in Czech Republic - Plzen is given. Regular meeting of Core Design Group was organized by SKODA JS, Inc. and held at Plzen-Bolevec, Czech Republic, May 21+22, 2001, together with Working Group A (Authors)

  10. AER Working Group B activities in 2010

    International Nuclear Information System (INIS)

    Darilek, P.

    2010-01-01

    Review of AER Working Group B Meeting in Modra - Harmonia, Slovakia is given. Regular meeting of Core Design Group was organized by VUJE, Inc. and held at Modra - pension Harmonia, Slovakia, April 20-22, 2010, together with Working Group A. Presented papers (see List of papers and List of participants) covered topics as follows. (Author)

  11. Reduced waste generation technical work plan

    International Nuclear Information System (INIS)

    1987-05-01

    The United States Department of Energy has established policies for avoiding plutonium losses to the waste streams and minimizing the generation of wastes produced at its nuclear facilities. This policy is evidenced in DOE Order 5820.2, which states ''Technical and administrative controls shall be directed towards reducing the gross volume of TRU waste generated and the amount of radioactivity in such waste.'' To comply with the DOE directive, the Defense Transuranic Waste Program (DTWP) supports and provides funding for specific research and development tasks at the various DOE sites to reduce the generation of waste. This document has been prepared to give an overview of current and past Reduced Waste Generation task activities which are to be based on technical and cost/benefit factors. The document is updated annually, or as needed, to reflect the status of program direction. Reduced Waste Generation (RWG) tasks encompass a wide range of goals which are basically oriented toward (1) avoiding the generation of waste, (2) changing processes or operations to reduce waste, (3) converting TRU waste into LLW by sorting or decontamination, and (4) reducing volumes through operations such as incineration or compaction

  12. PETRA - Technical implementation. PETRA working no. 9

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    This report describes the technical implementation of PETRA. The report is intended for specialist users and refers to the series of reports describing the project. The PETRA system consists of a number of econometric models, representing the national travel demand in Denmark. Application of these models requires the definition of a scenario, a number of runs with the individual models and extensive data transfer between the models and a database containing base data and results. The system contains three basic scenarios to which changes in various assumptions can be applied. It is possible to construct more basic scenarios but this is outside the scope of using the model as it presently stands. The focus of this report is thus on the specification of changes to basic scenario, on running the model - including description of the data flows, and on the possibilities for analysis of the results. (au) EFP-94. 11 refs.

  13. PERSPECTIVES ON GROUP WORK IN DISTANCE LEARNING

    Directory of Open Access Journals (Sweden)

    Rune Sarromaa HAUSSTÄTTER

    2007-01-01

    Full Text Available Current distance education benefits greatly from educational software that makes group work possible for students who are separated in time and space. However, some students prefer distance education because they can work on their own. This paper explores how students react to expectations on behalf of the course provider to do their assignments in collaborative groups. They are seemingly both positively surprised by the challenges that group work offer, and they are less positive to the downsides of group work. The paper discusses both sides of the experiences and suggests why this might be a paradox to live with.

  14. 76 FR 4365 - Renewal of the Trinity River Adaptive Management Working Group

    Science.gov (United States)

    2011-01-25

    ... Management Working Group AGENCY: Office of the Secretary, Interior. ACTION: Notice. SUMMARY: The Secretary of... Trinity River Adaptive Management Working Group (Working Group) for 2 years. The Working Group provides... stakeholders the opportunity to give policy, management, and technical input concerning Trinity River...

  15. 78 FR 5830 - Renewal of the Trinity River Adaptive Management Working Group

    Science.gov (United States)

    2013-01-28

    ... Management Working Group AGENCY: Office of the Secretary, Interior. ACTION: Notice. SUMMARY: The Secretary of... Trinity River Adaptive Management Working Group (Working Group) for 2 years. The Working Group provides... stakeholders the opportunity to give policy, management, and technical input concerning Trinity River...

  16. Working group 4B - human intrusion: Design/performance requirements

    International Nuclear Information System (INIS)

    Channell, J.

    1993-01-01

    There is no summary of the progress made by working group 4B (Human Intrusion: Design/performance Requirements) during the Electric Power Research Institute's EPRI Workshop on the technical basis of EPA HLW Disposal Criteria, March 1993. This group was to discuss the waste disposal standard, 40 CFR Part 191, in terms of the design and performance requirements of human intrusion. Instead, because there were so few members, they combined with working group 4A and studied the three-tier approach to evaluating postclosure performance

  17. Pollutant Assessments Group procedures manual: Volume 2, Technical procedures

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)

  18. School Counselors' Experiential Training in Group Work

    Science.gov (United States)

    Bore, Samuel K.; Armstrong, Stephen A.; Womack, Ashley

    2010-01-01

    School counselors' perceptions of the efficacy and satisfaction of their experiential training in group work were investigated. An exploratory factor analysis (n = 304) revealed four salient factors: leader characteristics, leader responsibilities, child/adolescent group leadership and adult group leadership. A majority of participants indicated…

  19. IODE Group of Experts on Technical Aspects of Data Exchange

    OpenAIRE

    2000-01-01

    During the 8th session of the IODE Group of Experts on Technical Aspects of Data Exchange reviewed the achievements made during the previous inter-sessional period. The Group also adopted a comprehensive workplan and medium-term objectives for GETADE that include: (i) develop End-To-End Data Management framework strategy and appropriate projects, products and services, based on user requirements; (ii) develop IODE Global metadata management system; (iii) develop marine XML as a mechanism to f...

  20. Technical Training: CLEAN-2002: Working in a Cleanroom

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training Programme: Learning for the LHC! CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific ...

  1. Preliminary recommendations of the Noise Working Group

    International Nuclear Information System (INIS)

    Legerton, M.L.

    1995-01-01

    In 1993 the DTI set up a Working Group largely consisting of independent experts on wind turbine noise. The main objectives of the Working Group were to define a framework which can be used to measure and rate the noise from wind turbines and to provide indicative noise levels thought to offer a reasonable degree of protection to wind farm neighbours and encourage best practice in turbine design and wind farm siting and layout. This paper presents the preliminary recommendations of the Working Group. (Author)

  2. Report on all ARRA Funded Technical Work

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2013-10-05

    The main focus of this American Recovery and Reinvestment Act of 2009 (ARRA) funded project was to design an energy efficient carbon capture and storage (CCS) process using the Recipients membrane system for H{sub 2} separation and CO{sub 2} capture. In the ARRA-funded project, the Recipient accelerated development and scale-up of ongoing hydrogen membrane technology research and development (R&D). Specifically, this project focused on accelerating the current R&D work scope of the base program-funded project, involving lab scale tests, detail design of a 250 lb/day H{sub 2} process development unit (PDU), and scale-up of membrane tube and coating manufacturing. This project scope included the site selection and a Front End Engineering Design (FEED) study of a nominally 4 to 10 ton-per-day (TPD) Pre-Commercial Module (PCM) hydrogen separation membrane system. Process models and techno-economic analysis were updated to include studies on integration of this technology into an Integrated Gasification Combined Cycle (IGCC) power generation system with CCS.

  3. Working group report: Cosmology and astroparticle physics

    Indian Academy of Sciences (India)

    This is the report of the cosmology and astroparticle physics working group at ... discussions carried out during the workshop on selected topics in the above fields. ... Theoretical Physics Division, Physical Research Laboratory, Navrangpura, ...

  4. Working group report: Cosmology and astroparticle physics

    Indian Academy of Sciences (India)

    This is the report of the cosmology and astroparticle physics working group ... origin of the accelerating Universe: Dark energy and particle cosmology by Y-Y Keum, .... Neutrino oscillations with two and three mass varying supernova neutrinos ...

  5. Summary of the Linear Collider Working Group

    International Nuclear Information System (INIS)

    Ruth, R.D.

    1989-01-01

    The focus of the Linear Collider Working Group was on a next generation linear collider. Topics discussed are: parameters; damping rings; bunch compression and pre-acceleration; linac; final focus; and multibunch effects. 8 refs., 3 figs., 7 tabs

  6. Eastern and Southern Africa Seismological Working Group

    International Nuclear Information System (INIS)

    Ogubazghi, G.

    2002-01-01

    Member countries of the Eastern and Southern Africa Seismologica Working Group are listed. The presentation also gives the objectives, activities, date of birth and sponsors of the said ESARSWG. Areas of possible cooperation with CTBTO are indicated

  7. Summary of the polarized beam working group

    International Nuclear Information System (INIS)

    Wienands, U.; Dyck, O. van.

    1989-05-01

    The polarized beam working group reviewed the AGS Bookster and TRIUMF KAON Factory facilities, heard an overview of the subject of siberian snakes, discussed internal polarized gas targets, and made recommendations for further study

  8. Working group report: Collider and B physics

    Indian Academy of Sciences (India)

    The activities of the working group including some of the seminars are summarized. The written ... The search for supersymmetry at future colliders also received a lot of attention. It is believed that ..... Then the kinematic regions can be divided.

  9. Beyond the Standard Model: Working group report

    Indian Academy of Sciences (India)

    Right-handed neutrino production in hot dense plasmas and constraints on the ... We thank all the participants of this Working Group for their all-round cooperation. The work of AR has been supported by grants from the Department of Science ...

  10. Teaching Group Work with "The Great Debaters"

    Science.gov (United States)

    Moe, Jeffry; Autry, Linda; Olson, Joann S.; Johnson, Kaprea F.

    2014-01-01

    An experiential learning activity, based on the film "The Great Debaters" (Washington, D., 2007), was used during a group work class. Description and preliminary evaluation of the activity is provided, including analysis of participant scores on the group leader self-efficacy instrument at multiple points. Implications and future…

  11. Report of the tunnel safety working group

    International Nuclear Information System (INIS)

    Gannon, J.

    1991-04-01

    On 18 February 1991 the Project Manager formed a working group to address the safety guidelines and requirements for the underground facilities during the period of accelerator construction, installation, and commissioning. The following report summarizes the research and discussions conducted by the group and the recommended guidelines for safety during this phase of the project

  12. Group identity and positive deviance in work groups.

    Science.gov (United States)

    Kim, Moon Joung; Choi, Jin Nam

    2017-12-05

    This study examines why and how identity cognitions, including group identification and individual differentiation, influence the positive deviance of employees. We identify the risk-taking intention of employees as a critical psychological mechanism to overcome stigma-induced identity threat of positive deviance. The analysis of data collected from 293 members comprising 66 work teams reveals that the relationship between individual differentiation and positive deviance is partially mediated by risk-taking intention. The indirect effect of group identification on positive deviance through risk-taking intention is also significant and positive in groups with low conformity pressure, whereas the same indirect effect is neutralized in groups with high conformity pressure. The current analysis offers new insights into the way the group context and the identity cognition of members explain the development of positive deviance and workplace creativity.

  13. Working group report: heavy ion physics

    International Nuclear Information System (INIS)

    Alam, Jan-E; Chattopadhyay, S.; Assamagan, K.; Gavai, R.; Gupta, Sourendra; Mukherjee, S.; Ray, R.; Layek, B.; Srivastava, A.; Roy, Pradip K.

    2004-01-01

    The 8th workshop on high energy physics phenomenology (WHEPP-8) was held at the Indian Institute of Technology, Mumbai, India during January 5-16, 2004. One of the four working groups, group III was dedicated to QCD and heavy ion physics (HIC). The present manuscript gives a summary of the activities of group III during the workshop. The activities of group III were focused to understand the collective behaviours of the system formed after the collisions of two nuclei at ultra-relativistic energies from the interactions of the elementary degrees of freedom, i.e. quarks and gluons, governed by non-Abelian gauge theory, i.e. QCD. This was initiated by two plenary talks on experimental overview of heavy ion collisions and lattice QCD and several working group talks and discussions. (author)

  14. Group work as an incentive for learning – students’ experiences of group work

    Science.gov (United States)

    Hammar Chiriac, Eva

    2014-01-01

    Group work is used as a means for learning at all levels in educational systems. There is strong scientific support for the benefits of having students learning and working in groups. Nevertheless, studies about what occurs in groups during group work and which factors actually influence the students’ ability to learn is still lacking. Similarly, the question of why some group work is successful and other group work results in the opposite is still unsolved. The aim of this article is to add to the current level of knowledge and understandings regarding the essence behind successful group work in higher education. This research is focused on the students’ experiences of group work and learning in groups, which is an almost non-existing aspect of research on group work prior to the beginning of the 21st century. A primary aim is to give university students a voice in the matter by elucidating the students’ positive and negative points of view and how the students assess learning when working in groups. Furthermore, the students’ explanations of why some group work ends up being a positive experience resulting in successful learning, while in other cases, the result is the reverse, are of interest. Data were collected through a study-specific questionnaire, with multiple choice and open-ended questions. The questionnaires were distributed to students in different study programs at two universities in Sweden. The present result is based on a reanalysis and qualitative analysis formed a key part of the study. The results indicate that most of the students’ experiences involved group work that facilitated learning, especially in the area of academic knowledge. Three important prerequisites (learning, study-social function, and organization) for group work that served as an effective pedagogy and as an incentive for learning were identified and discussed. All three abstractions facilitate or hamper students’ learning, as well as impact their experiences with

  15. Astrophysics at RIA (ARIA) Working Group

    International Nuclear Information System (INIS)

    Smith, Michael S.; Schatz, Hendrik; Timmes, Frank X.; Wiescher, Michael; Greife, Uwe

    2006-01-01

    The Astrophysics at RIA (ARIA) Working Group has been established to develop and promote the nuclear astrophysics research anticipated at the Rare Isotope Accelerator (RIA). RIA is a proposed next-generation nuclear science facility in the U.S. that will enable significant progress in studies of core collapse supernovae, thermonuclear supernovae, X-ray bursts, novae, and other astrophysical sites. Many of the topics addressed by the Working Group are relevant for the RIKEN RI Beam Factory, the planned GSI-Fair facility, and other advanced radioactive beam facilities

  16. Abandoned Mine Waste Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    The Mine Waste Working Group discussed the nature and possible contributions to the solution of this class of waste problem at length. There was a consensus that the mine waste problem presented some fundamental differences from the other classes of waste addresses by the Develop On-Site Innovative Technologies (DOIT) working groups. Contents of this report are: executive summary; stakeholders address the problems; the mine waste program; current technology development programs; problems and issues that need to be addressed; demonstration projects to test solutions; conclusion-next steps; and appendices

  17. Military Munitions Waste Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    This report presents the findings of the Military Munitions Waste Working Group in its effort to achieve the goals directed under the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT Committee) for environmental restoration and waste management. The Military Munitions Waste Working Group identified the following seven areas of concern associated with the ordnance (energetics) waste stream: unexploded ordnance; stockpiled; disposed -- at known locations, i.e., disposal pits; discharged -- impact areas, unknown disposal sites; contaminated media; chemical sureties/weapons; biological weapons; munitions production; depleted uranium; and rocket motor and fuel disposal (open burn/open detonation). Because of time constraints, the Military Munitions Waste Working Group has focused on unexploded ordnance and contaminated media with the understanding that remaining waste streams will be considered as time permits. Contents of this report are as follows: executive summary; introduction; Military Munitions Waste Working Group charter; description of priority waste stream problems; shortcomings of existing approaches, processes and technologies; innovative approaches, processes and technologies, work force planning, training, and education issues relative to technology development and cleanup; criteria used to identify and screen potential demonstration projects; list of potential candidate demonstration projects for the DOIT committee decision/recommendation and appendices

  18. Military Munitions Waste Working Group report

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-30

    This report presents the findings of the Military Munitions Waste Working Group in its effort to achieve the goals directed under the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT Committee) for environmental restoration and waste management. The Military Munitions Waste Working Group identified the following seven areas of concern associated with the ordnance (energetics) waste stream: unexploded ordnance; stockpiled; disposed -- at known locations, i.e., disposal pits; discharged -- impact areas, unknown disposal sites; contaminated media; chemical sureties/weapons; biological weapons; munitions production; depleted uranium; and rocket motor and fuel disposal (open burn/open detonation). Because of time constraints, the Military Munitions Waste Working Group has focused on unexploded ordnance and contaminated media with the understanding that remaining waste streams will be considered as time permits. Contents of this report are as follows: executive summary; introduction; Military Munitions Waste Working Group charter; description of priority waste stream problems; shortcomings of existing approaches, processes and technologies; innovative approaches, processes and technologies, work force planning, training, and education issues relative to technology development and cleanup; criteria used to identify and screen potential demonstration projects; list of potential candidate demonstration projects for the DOIT committee decision/recommendation and appendices.

  19. S3T working group. Report 1: group aims

    International Nuclear Information System (INIS)

    Pouey, M.

    1983-04-01

    The work group S3T which is aimed to designing and developing devices using unconventional holographic optics is presented. These devices find applications that are classified here in four items high resolution spectrometers, high definition imaging, high flux devices, metrology and interferometry. The problems to solve and the aims of the group in each of these cases are presented. Three synthesis of lectures are in this report. The main one concerns stigmatism conditions of concave holographic gratings used in normal incidence. This new process of focusing is very interesting for hot plasma diagnostics [fr

  20. Group work as an incentive for learning – students’ experiences of group work

    Directory of Open Access Journals (Sweden)

    Eva eHammar Chiriac

    2014-06-01

    Full Text Available Group work is used as a means for learning at all levels in educational systems. There is strong scientific support for the benefits of having students learning and working in groups. Nevertheless, studies about what occurs in groups during group work and which factors actually influence the students’ ability to learn is still lacking. Likewise, the question of why some group work is successful and other work results in the opposite is still unsolved. The aim of this article is to add to the current level of knowledge and understandings regarding the essence behind successful group work in higher education. This research is focused on the students’ experiences of group work and learning in groups, which is an almost non-existing aspect of research on group work prior to the beginning of the 21st century. A primary aim is to give university students a voice in the matter by elucidating the students’ positive and negative points of view and how the students assess learning when working in groups. Furthermore, the students’ explanations of why some group work ends up being a positive experience resulting in successful learning, while in other cases, the result is the reverse, are of interest. Data were collected through a study-specific questionnaire, with multiple choice and open-ended questions. The questionnaires were distributed to students in different study programs at two universities in Sweden. The present result is based on a reanalysis and qualitative analysis formed a key part of the study. The results indicate that most of the students’ experiences involved group work that facilitated learning, especially in the area of academic knowledge. Three important prerequisites (learning, study-social function and organization for group work that served as an effective pedagogy and as an incentive for learning were identified and discussed. All three abstractions facilitate or hamper students’ learning, as well as impact their

  1. PROLIFERATION RESISTANCE AND PHYSICAL PROTECTION WORKING GROUP: METHODOLOGY AND APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Bari R. A.; Whitlock, J.; Therios, I.U.; Peterson, P.F.

    2012-11-14

    We summarize the technical progress and accomplishments on the evaluation methodology for proliferation resistance and physical protection (PR and PP) of Generation IV nuclear energy systems. We intend the results of the evaluations performed with the methodology for three types of users: system designers, program policy makers, and external stakeholders. The PR and PP Working Group developed the methodology through a series of demonstration and case studies. Over the past few years various national and international groups have applied the methodology to nuclear energy system designs as well as to developing approaches to advanced safeguards.

  2. Proliferation resistance and physical protection working group: methodology and applications

    International Nuclear Information System (INIS)

    Bari, Robert A.; Whitlock, Jeremy J.; Therios, Ike U.; Peterson, P.F.

    2012-01-01

    We summarize the technical progress and accomplishments on the evaluation methodology for proliferation resistance and physical protection (PR and PP) of Generation IV nuclear energy systems. We intend the results of the evaluations performed with the methodology for three types of users: system designers, program policy makers, and external stakeholders. The PR and PP Working Group developed the methodology through a series of demonstration and case studies. Over the past few years various national and international groups have applied the methodology to nuclear energy system designs as well as to developing approaches to advanced safeguards.

  3. Working through a psychotherapy group's political cultures.

    Science.gov (United States)

    Ettin, Mark F; Cohen, Bertram D

    2003-10-01

    Macropolitical evolution, starting with authoritarian monarchism, has moved through anarchistic transitions either to the totalitarianism of fascism and communism or to liberal and social democracy. We posit analogous micropolitical development in process-oriented therapy groups: "dependence" and "counterdependence" corresponding to monarchism and anarchism; and "independence" and "interdependence" to liberal and social democracy, respectively. Transition from counterdependence to independence and interdependence may be: (1) facilitated through group members' cooperative experience of rebellion, or (2) blocked by collective identification, the internalization of dystopian or utopian fantasies that coalesce as "group-self" perceptions. We explore how group therapists work clinically with and through these several "political cultures" in the service of group and self transformation.

  4. Rethinking Engineering by Working Interdisciplinary in Groups

    NARCIS (Netherlands)

    Dr. J.B.F. van Zonneveld; Dr.Ir. Hay Geraedts

    1997-01-01

    In this paper we will describe and present the results of an experiment at the Fontys University of Professional Education in which engineering students work together with students from other disciplines in a multidisciplinary group at the end of their study on a real-life environmental problem

  5. Particle physics-astrophysics working group

    International Nuclear Information System (INIS)

    Cronin, J.W.; Kolb, E.W.

    1989-01-01

    The working group met each afternoon and listened to mini-symposia on a broad range of subjects covering all aspects of particle physics---astrophysics both theoretical and experimental. This paper reports that as a result, a number of papers which follow were commissioned to reflect the present status and future prospects of the field

  6. Scattering kernels and cross sections working group

    International Nuclear Information System (INIS)

    Russell, G.; MacFarlane, B.; Brun, T.

    1998-01-01

    Topics addressed by this working group are: (1) immediate needs of the cold-moderator community and how to fill them; (2) synthetic scattering kernels; (3) very simple synthetic scattering functions; (4) measurements of interest; and (5) general issues. Brief summaries are given for each of these topics

  7. Complex dynamics in supervised work groups

    Science.gov (United States)

    Dal Forno, Arianna; Merlone, Ugo

    2013-07-01

    In supervised work groups many factors concur to determine productivity. Some of them may be economical and some psychological. According to the literature, the heterogeneity in terms of individual capacity seems to be one of the principal causes for chaotic dynamics in a work group. May sorting groups of people with same capacity for effort be a solution? In the organizational psychology literature an important factor is the engagement in the task, while expectations are central in the economics literature. Therefore, we propose a dynamical model which takes into account both engagement in the task and expectations. An important lesson emerges. The intolerance deriving from the exposure to inequity may not be only caused by differences in individual capacities, but also by these factors combined. Consequently, solutions have to be found in this new direction.

  8. PM of the Vuotos working group

    International Nuclear Information System (INIS)

    Ojala, J.; Oikarinen, S.

    1995-01-01

    In the program for the Finnish Government will study the premises of the Vuotos Basin Project in the light of the most recent environment studies. For this purpose the Ministry of Trade and Industry appointed a working group. The working group has studied the latest reports on the Vuotos Project which were available up to 30 9.1995. The working group also updated the projections of the energy significance of the project and how it would affect employment. The working group arrived at these conclusions: The Vuotos Project is still of energy economy significance because the need for domestic energy production capacity - and also capacity that can be regulated - is on the rise. The project will not cause any fatal diminishing of the abundance of any Finnish plant or animal species, but it will diminish the number of habitants for some threatened plants and birds. Thus it will diminish the diversity of Finnish nature and the possibilities to use the area for many purposes. The project will cause the weakening of water quality in the streams beneath the basin for the first few years. The project is important for employment reasons, because it will diminish unemployment during construction by 2-8 %-units, depending on the county, and it will make the creation of new jobs possible in the long run. The working group thinks that estimates of experts concerning the pros and cons of the project are quite different and that the final weighing of the considerable body of research and reports can best be made at the Water Court proceedings. (author)

  9. Synthesis of the working group discussions

    International Nuclear Information System (INIS)

    2003-01-01

    activities. In coming years, a greater emphasis on EBS integrity issues can be expected within SKI's long-term programme for gradual development of review capability. In the autumn of 2004, an additional EBS workshop is planned, which will focus on EBS component quality and the expected initial state of the EBS. Subsequently, specialised workshops are planned for more detailed insight in selected areas, targeting issue resolution as well as identification. A few of the technical issues that received considerable attention during the workshop are noted below: The performance assessment need to contain a description of the initial state of the system that can be regarded as realistic rather than idealised. In particular, the characterisation and statistical analysis of both large and small defects in the weldments of the copper canister has to be rigorous. The long-term experiments aimed at demonstrating feasibility of the KBS-3 concept have to be reviewed in more detail. It was suggested that SKB consider whether the present programme needs to be extended. SKB needs to present a plan for monitoring during repository operation. One of the working groups recommended that SKB should set up a demonstration tunnel in the repository, which would be dismantled and examined, with the purpose of performance confirmation prior to sealing the repository. The understanding of the resaturation phase for the buffer needs to be improved. Preliminary results indicate that the resaturation phase may be more extended that previously anticipated. In addition, an uneven resaturation of the buffer may result in localised stress transfer to the canister. All conceivable implications of an extended or uneven resaturation phase has to be evaluated, if they cannot be very convincingly ruled out, e.g. thermal gradients across the buffer may lead to mass transfer of chemical components, and consequently variations in thermal, hydrological and mechanical properties. More data is needed for evaluation of

  10. [Group psychotherapy. Working team in community psychiatry].

    Science.gov (United States)

    Quevedo, J S; Barrera, E H

    1977-01-01

    A Community Psychiatry program was begun, based on the needs and requests of a clinic (this approach is restricted because there are institutional factors that only the institution can change). The work was aimed at sensitizing the beneficiaries and change clinic factors modifiable through operative group technique. When a great deal of every day stereotypes appeared, role playing was used: as a result, people in the clinic realized how they acted and how they asked from others behaviors that they themselves found difficult to show. As results, it was found that when workers were confronted with reality, desertion from operative groups appeared, with projection of problems (them, not me), great fear of change (fantasized in different ways), group passivity and the image of the institution, that the group saw as a persecutor.

  11. Socio-technicality, Human Work Interaction Design (HWID), and Work Engagement

    DEFF Research Database (Denmark)

    Clemmensen, Torkil; Campos, Pedro; Abdelnour-Nocera, José

    the sociotechnical tradition, however, tells us that looking at work engagement only or mainly from a technical design side is the wrong way to go; instead the social and the technical need to be considered on an equal footing. We give the theoretical motivation and background in sociotechnical thinking for our...

  12. Volcanism/tectonics working group summary

    International Nuclear Information System (INIS)

    Kovach, L.A.; Young, S.R.

    1995-01-01

    This article is a summary of the proceedings of a group discussion which took place at the Workshop on the Role of Natural Analogs in Geologic Disposal of High-Level Nuclear Waste in San Antonio, Texas on July 22-25, 1991. The working group concentrated on the subject of the impacts of earthquakes, fault rupture, and volcanic eruption on the underground repository disposal of high-level radioactive wastes. The tectonics and seismic history of the Yucca Mountain site in Nevada is discussed and geologic analogs to that site are described

  13. Summary from working group on noninterceptive diagnostics

    International Nuclear Information System (INIS)

    Chamberlin, D.D.

    1985-01-01

    The working group for noninterceptive diagnostics spent much of its time comparing diagnostic techniques from different fields and their possible application to high-power injectors. The group included backgrounds from electron beam diagnostics, fusion power diagnostics, cw ion source and transport design, and ion beam of diagnostics. The probability of success for adapting techniques from these different areas is quite difficult to judge, short of a detailed examination of each application. Unexpected flaws or unforeseen noise sources can eliminate an idea that would otherwise appear promising. The report presents several ideas that were discussed, with an indication of those ideas most likely to succeed if implemented

  14. Radiation Sources Working Group Summary Report

    International Nuclear Information System (INIS)

    Fazio, Michael V.

    1999-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, component technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigarion, and phenomena that impact source design such as fatigue in resonant structures due to pulsed RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations

  15. Radiation Sources Working Group Summary Report

    International Nuclear Information System (INIS)

    Fazio, M.V.

    1999-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, component technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigarion, and phenomena that impact source design such as fatigue in resonant structures due to pulsed RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations. copyright 1999 American Institute of Physics

  16. Annotated bibliography of structural equation modelling: technical work.

    Science.gov (United States)

    Austin, J T; Wolfle, L M

    1991-05-01

    Researchers must be familiar with a variety of source literature to facilitate the informed use of structural equation modelling. Knowledge can be acquired through the study of an expanding literature found in a diverse set of publishing forums. We propose that structural equation modelling publications can be roughly classified into two groups: (a) technical and (b) substantive applications. Technical materials focus on the procedures rather than substantive conclusions derived from applications. The focus of this article is the former category; included are foundational/major contributions, minor contributions, critical and evaluative reviews, integrations, simulations and computer applications, precursor and historical material, and pedagogical textbooks. After a brief introduction, we annotate 294 articles in the technical category dating back to Sewall Wright (1921).

  17. Group Organized Project Work in Distance Education

    DEFF Research Database (Denmark)

    Helbo, Jan; Knudsen, Morten; Jensen, Lars Peter

    2001-01-01

    Project organized problem based learning is a successful concept for on-campus education at Aalborg University. Recently this "Aalborg concept" has been used in networked distance education as well. This paper describes the experiences from two years of Internet-mediated project work in a new...... Master of Information Technology education. The main conclusions are, that the project work is a strong learning motivator, enhancing peer collaboration, for off-campus students as well. However, the concept cannot be directly transferred to off-campus learning. The main reasons are that the students...... must communicate electronically, and that they are under a fierce time strain, studying part time and typically with a full time job and a family. In this paper, the main problems experienced with group organized project work in distance education are described, and some possible solutions are listed...

  18. Technical Work Plan for: Fracture and Lithophysal Studies

    Energy Technology Data Exchange (ETDEWEB)

    n

    2006-09-11

    The primary objective of the work scope described in this technical work plan (TWP) is to enhance the descriptions of fracture and lithophysal parameters for the repository host horizon (RHH) over the repository footprint utilizing a predictive model. This work is planned to address U.S. Nuclear Regulatory Commission (NRC) additional information needs (AINs) associated with the Structural Deformation and Seismicity (SDS) Key Technical Issues (KTI) agreement SDS 3.03 (Schlueter 2000 [DIRS 166615]). The results of the planned work are expected to enhance the technical basis and confirm the results of the fracture analyses presented in ''Drift Degradation Analysis'' (BSC 2004 [DIRS 166107], Section 6.1.6). This model is not intended to provide an alternative for the unsaturated zone and saturated zone flow and transport models currently used by the Yucca Mountain Project (YMP). Nor are the outputs of this model intended to address the SDS 3.03 AINs related to the unsaturated zone and saturated zone flow and transport models.

  19. Technical Work Plan for: Fracture and Lithophysal Studies

    International Nuclear Information System (INIS)

    2006-01-01

    The primary objective of the work scope described in this technical work plan (TWP) is to enhance the descriptions of fracture and lithophysal parameters for the repository host horizon (RHH) over the repository footprint utilizing a predictive model. This work is planned to address U.S. Nuclear Regulatory Commission (NRC) additional information needs (AINs) associated with the Structural Deformation and Seismicity (SDS) Key Technical Issues (KTI) agreement SDS 3.03 (Schlueter 2000 [DIRS 166615]). The results of the planned work are expected to enhance the technical basis and confirm the results of the fracture analyses presented in ''Drift Degradation Analysis'' (BSC 2004 [DIRS 166107], Section 6.1.6). This model is not intended to provide an alternative for the unsaturated zone and saturated zone flow and transport models currently used by the Yucca Mountain Project (YMP). Nor are the outputs of this model intended to address the SDS 3.03 AINs related to the unsaturated zone and saturated zone flow and transport models

  20. Test Blanket Working Group's recent activities

    International Nuclear Information System (INIS)

    Vetter, J.E.

    2001-01-01

    The ITER Test Blanket Working Group (TBWG) has continued its activities during the period of extension of the EDA with a revised charter on the co-ordination of the development work performed by the Parties and by the JCT leading to a co-ordinated test programme on ITER for a DEMO-relevant tritium breeding blanket. This follows earlier work carried out until July 1998, which formed part of the ITER Final Design Report (FDR), completed in 1998. Whilst the machine parameters for ITER-FEAT have been significantly revised compared to the FDR, testing of breeding blanket modules remains a main objective of the test programme and the development of a reactor-relevant breeding blanket to ensure tritium fuel self-sufficiency is recognized a key issue for fusion. Design work and R and D on breeding blanket concepts, including co-operation with the other Contacting Parties of the ITER-EDA for testing these concepts in ITER, are included in the work plans of the Parties

  1. Activities of the PNC Nuclear Safety Working Group

    International Nuclear Information System (INIS)

    Kato, W.Y.

    1991-01-01

    The Nuclear Safety Working Group of the Pacific Nuclear Council promotes nuclear safety cooperation among its members. Status of safety research, emergency planning, development of lists of technical experts, severe accident prevention and mitigation have been the topics of discussion in the NSWG. This paper reviews and compares the severe accident prevention and mitigation program activities in some of the areas of the Pacific Basin region based on papers presented at a special session organized by the NSWG at an ANS Topical Meeting as well as papers from other sources

  2. Cold moderator test facilities working group

    International Nuclear Information System (INIS)

    Bauer, Guenter S.; Lucas, A. T.

    1997-09-01

    The working group meeting was chaired by Bauer and Lucas.Testing is a vital part of any cold source development project. This applies to specific physics concept verification, benchmarking in conjunction with computer modeling and engineering testing to confirm the functional viability of a proposed system. Irradiation testing of materials will always be needed to continuously extend a comprehensive and reliable information database. An ever increasing worldwide effort to enhance the performance of reactor and accelerator based neutron sources, coupled with the complexity and rising cost of building new generation facilities, gives a new dimension to cold source development and testing programs. A stronger focus is now being placed on the fine-tuning of cold source design to maximize its effectiveness in fully exploiting the facility. In this context, pulsed spallation neutron sources pose an extra challenge due to requirements regarding pulse width and shape which result from a large variety of different instrument concepts. The working group reviewed these requirements in terms of their consequences on the needs for testing equipment and compiled a list of existing and proposed facilities suitable to carry out the necessary development work.

  3. Technical Support Section annual work plan for FY 1998

    Energy Technology Data Exchange (ETDEWEB)

    Adkisson, B.P.; Allison, K.L.; Effler, R.P.; Hess, R.A.; Keeble, T.A.; Odom, S.M.; Smelcer, D.R.

    1997-12-01

    The Technical Support Section (TSS) of the Instrumentation and Controls (I and C) Division of Oak Ridge National Laboratory (ORNL) provides technical services such as fabrication, modification, installation, calibration, operation, repair, and preventive maintenance of instruments and other related equipment. Because the activities and priorities of TSS must be adapted to the technical support needs of ORNL, the TSS Annual Work Plan is derived from, and is driven directly by, current trends in the budgets and activities of each ORNL division for which TSS provides support. Trends that will affect TSS planning during this period are reductions in the staffing levels of some R and D programs because of attrition or budget cuts. TSS does not have an annual budget to cover operating expenses incurred in providing instrument maintenance support to ORNL. Each year, TSS collects information concerning the projected funding levels of programs and facilities it supports. TSS workforce and resource projections are based on the information obtained and are weighted depending on the percentage of support provided to that division or program. Each year, TSS sets the standard hourly charge rate for the following fiscal year. The Long-Range Work Plan is based on estimates of the affects of the long-range priorities and directions of the Laboratory. Proposed new facilities and programs provide additional bases for long-range planning. After identifying long-range initiatives, TSS planning includes future training requirements, reevaluation of qualifications for new hires, and identification of essential test equipment that will be needed for new work.

  4. FAVL work group: report and recommendations

    International Nuclear Information System (INIS)

    2011-01-01

    This document reports the works of a work group dedicated to the process of search for storage site for low activity and long life radioactive wastes. The authors recall the history of this process which started in the early 1990's, and resulted in the selection of two sites, in Auxon and in Pars-les-Chavanges, and finally in the withdrawal of both towns. Then, the authors analyse the whole process in terms of intervention or participation of local authorities, of information and participation of waste producers. They also discuss the roles of the ASN, IRSN, DGEC, ANDRA and ANDRA's Coesdic. They make recommendations regarding site selection, agenda, responsibilities, preferential representative at the local level, public information, consultation, and project support

  5. Activities of covariance utilization working group

    International Nuclear Information System (INIS)

    Tsujimoto, Kazufumi

    2013-01-01

    During the past decade, there has been a interest in the calculational uncertainties induced by nuclear data uncertainties in the neutronics design of advanced nuclear system. The covariance nuclear data is absolutely essential for the uncertainty analysis. In the latest version of JENDL, JENDL-4.0, the covariance data for many nuclides, especially actinide nuclides, was substantialy enhanced. The growing interest in the uncertainty analysis and the covariance data has led to the organisation of the working group for covariance utilization under the JENDL committee. (author)

  6. Report of ITER Special Working Group 2

    International Nuclear Information System (INIS)

    Roberts, M.

    1994-01-01

    ITER Special Working Group 2 (SWG-2) was established by the terms of the ITER-EDA Agreement. According to that agreement, open-quotes SWG-2 shall submit guidelines for implementation of task assignments by the Home Teams to the Council for approval at its second meeting. This SWG shall also draft Protocol 2 to the ITER-EDA Agreement and submit a draft to the Council not later than by 21 May 1993.close quotes The members of SWG-2 for Protocol 2 drafting are listed. The rest of this paper is the verbatim report of SWG-2 on Protocol 2

  7. Reports from the Combined Performance Working Groups

    CERN Multimedia

    S. Haywood

    The main goal of the Combined Performance Groups is to study the detector performance for physics, as well as to monitor the effect of changes to the detector layout and the evolution of the software. The groups combine the expertise available in several different subdetectors. In addition, they are responsible for developing combined reconstruction algorithms and are involved in the calibration of energy scales and optimising resolutions. For the Workshop, the four groups made a real effort to compare the reconstruction in Athena (the "New" C++ software framework) and Atrecon (the "Old" software used for the TDR studies). b-tagging Working Group: Over the last few months, the description of the Inner Detector in the simulation has become more realistic, following the evolution of the detector design. This has caused the amount of material in the simulation to increase and the Pixel B-layer has been moved to a larger radius to allow for a wider beam-pipe. Nevertheless, the good performance of the b-tagging (...

  8. Deliberations of working group 2: trust and the institutional framework

    International Nuclear Information System (INIS)

    Metlay, D.

    2000-01-01

    The meeting of Working Group 2 (WG-2) was preceded by two presentations in the plenary session: 'Legal and Institutional Frameworks for Government Relations with Citizens' and 'The Role and Experience of Technical Oversight Bodies'. The first identified trust and legitimacy as key resources for effective policy making and democratic governance as well as the current progress and difficulties at OECD governments' level in promoting public trust and participation. The second described the use of technical oversight bodies to provide a function of mediation between scientists, public authorities and the general public, in order to facilitate communication and understanding of technical issues and research. Dr. Aebersold gave a presentation to WG-2 on the results of Switzerland's Expert Group on Disposal Concepts for Radioactive Waste (EKRA). This group was established to bridge between nuclear power plant operators and environmental organisations, who had opposing views of radioactive waste disposal in general, and the choice of the Wellenberg site for a geological repository in particular. The success of EKRA in having its recommendations accepted and advancing the long term waste management programme was attributed to, among other things: the popular acceptance of the EKRA chairman; the competence, independence and commitment of the EKRA members; the responsiveness of their recommendations to public concerns and social issues; and the openness and transparency of their work (including broad media coverage). Dr. Metlay, who chaired WG-2, described field studies that he has undertaken dealing with trust in specific institutions in the US. This initiated the discussions, which ranged from a general understanding of the nature of trust, to why it may be important in the successful siting and development of a repository. (author)

  9. The recommendations of the noise working group

    International Nuclear Information System (INIS)

    Legerton, M.L.

    1997-01-01

    In 1993 the DTI set up a Working Group to define a framework which can be used to measure and rate the noise from wind turbines. The final report of the Noise Working Group is now available for publication. The advice on the setting of noise limits for wind farms is largely unaltered from the preliminary recommendations presented at the 17th BWEA Annual Conference [1]. This paper recaps on those recommendations and provides additional information on the measurement procedures to be used with the recommendations on noise limits. The paper describes the measurement of the existing background noise climate on which the limits are based and the procedure to be used for the measurement of turbine noise levels in the investigation of complaints. The noise limits are rated noise levels in that they can include a penalty for tones present in the noise. The level of penalty depends upon the audibility of the tone and measurement procedure for determining audibility and the associated penalty system are also described. (author)

  10. NASA's Internal Space Weather Working Group

    Science.gov (United States)

    St. Cyr, O. C.; Guhathakurta, M.; Bell, H.; Niemeyer, L.; Allen, J.

    2011-01-01

    Measurements from many of NASA's scientific spacecraft are used routinely by space weather forecasters, both in the U.S. and internationally. ACE, SOHO (an ESA/NASA collaboration), STEREO, and SDO provide images and in situ measurements that are assimilated into models and cited in alerts and warnings. A number of years ago, the Space Weather laboratory was established at NASA-Goddard, along with the Community Coordinated Modeling Center. Within that organization, a space weather service center has begun issuing alerts for NASA's operational users. NASA's operational user community includes flight operations for human and robotic explorers; atmospheric drag concerns for low-Earth orbit; interplanetary navigation and communication; and the fleet of unmanned aerial vehicles, high altitude aircraft, and launch vehicles. Over the past three years we have identified internal stakeholders within NASA and formed a Working Group to better coordinate their expertise and their needs. In this presentation we will describe this activity and some of the challenges in forming a diverse working group.

  11. Summary Report of Working Group 2: Computation

    International Nuclear Information System (INIS)

    Stoltz, P. H.; Tsung, R. S.

    2009-01-01

    The working group on computation addressed three physics areas: (i) plasma-based accelerators (laser-driven and beam-driven), (ii) high gradient structure-based accelerators, and (iii) electron beam sources and transport [1]. Highlights of the talks in these areas included new models of breakdown on the microscopic scale, new three-dimensional multipacting calculations with both finite difference and finite element codes, and detailed comparisons of new electron gun models with standard models such as PARMELA. The group also addressed two areas of advances in computation: (i) new algorithms, including simulation in a Lorentz-boosted frame that can reduce computation time orders of magnitude, and (ii) new hardware architectures, like graphics processing units and Cell processors that promise dramatic increases in computing power. Highlights of the talks in these areas included results from the first large-scale parallel finite element particle-in-cell code (PIC), many order-of-magnitude speedup of, and details of porting the VPIC code to the Roadrunner supercomputer. The working group featured two plenary talks, one by Brian Albright of Los Alamos National Laboratory on the performance of the VPIC code on the Roadrunner supercomputer, and one by David Bruhwiler of Tech-X Corporation on recent advances in computation for advanced accelerators. Highlights of the talk by Albright included the first one trillion particle simulations, a sustained performance of 0.3 petaflops, and an eight times speedup of science calculations, including back-scatter in laser-plasma interaction. Highlights of the talk by Bruhwiler included simulations of 10 GeV accelerator laser wakefield stages including external injection, new developments in electromagnetic simulations of electron guns using finite difference and finite element approaches.

  12. A working plan for working group 2 'enrichment' within the scope of INFCE

    International Nuclear Information System (INIS)

    1977-01-01

    A working plan for INFCE/WG.2 is presented, outlining the major questions which the group needs to answer under the headings: 1. Enrichment needs and supply, 2. Models for cross-investment, 3. Market situation, 4. Technical and economic assessment of the different enrichment technologies, and 5. Safeguards aspects. It is suggested that the group's assessment should include: 1. Future enrichment capacities, 2. Multinational or regional fuel cycle centres, 3. Possible patterns for guarantees of supply, and 4. Special needs of developing countries

  13. Technical Work Plan For: Meteorological Monitoring and Data Analysis

    International Nuclear Information System (INIS)

    C.T. Bastian

    2003-01-01

    The meteorological monitoring and analysis program has three overall objectives. First, the program will acquire qualified meteorological data from monitoring activities in the Environmental Safety and Health (ES and H) network, including appropriate controls on measuring and test equipment. All work will be completed in accordance with U.S. Department of Energy (DOE) Office of Repository Development (ORD) administrative procedures and Bechtel SAIC Co., LLC (BSC) line procedures. The continuously operating monitoring program includes measuring and test equipment calibrations, operational checks, preventive and corrective maintenance, and data collection. Second, the program will process the raw monitoring data collected in the field and submit technically reviewed, traceable data to the Technical Data Management System (TDMS) and the Records Processing Center. Third, reports containing analyses or calculations could be created to provide information to data requesters

  14. Nuclear power plant life management processes: Guidelines and practices for heavy water reactors. Report prepared within the framework of the Technical Working Groups on Advanced Technologies for Heavy Water Reactors and on Life Management of Nuclear Power Plants

    International Nuclear Information System (INIS)

    2006-06-01

    The time is right to address nuclear power plant life management and ageing management issues in terms of processes and refurbishments for long term operation and license renewal aspects of heavy water reactors (HWRs) because some HWRs are close to the design life. In general, HWR nuclear power plant (NPP) owners would like to keep their NPPs in service as long as they can be operated safely and economically. This involves the consideration of a number of factors, such as the material condition of the plant, comparison with current safety standards, the socio-political climate and asset management/ business planning considerations. This TECDOC deals with organizational and managerial means to implement effective plan life management (PLiM) into existing plant in operating HWR NPPs. This TECDOC discusses the current trend of PLiM observed in NPPs to date and an overview of PLiM programmes and considerations. This includes key objectives of such programs, regulatory considerations, an overall integrated approach, organizational and technology infrastructure considerations, importance of effective plant data management and finally, human issues related to ageing and finally integration of PLiM with economic planning. Also general approach to HWR PLiM, including the key PLiM processes, life assessment for critical structures and components, conditions assessment of structures and components and obsolescence is mentioned. Technical aspects are described on component specific technology considerations for condition assessment, example of a proactive ageing management programme, and Ontario power generation experiences in appendices. Also country reports from Argentina, Canada, India, the Republic of Korea and Romania are attached in the annex to share practices and experiences to PLiM programme. This TECDOC is primarily addressed to both the management (decision makers) and technical staff (engineers and scientists) of NPP owners/operators and technical support

  15. Summary of the accelerator working group

    International Nuclear Information System (INIS)

    Ankenbrandt, C.; Noble, R.J.

    1998-03-01

    We present a summary of the main topics discussed in the Accelerator Working Group during the ''Workshop on the Physics at the First Muon Collider''. The discussions centered on critical design issues for a high-intensity, medium-energy proton synchrotron that would replace the present Fermilab 8 GeV Booster early in the next century. Such a machine is intended both to serve the hadron program with an order of magnitude increase in average proton current and to be compatible as a source for a future muon collider. Particular issues discussed at length include rf system design, control of longitudinal space-charge effects, bunching of proton beams and beam instabilities

  16. Working Group Report: Lattice Field Theory

    Energy Technology Data Exchange (ETDEWEB)

    Blum, T.; et al.,

    2013-10-22

    This is the report of the Computing Frontier working group on Lattice Field Theory prepared for the proceedings of the 2013 Community Summer Study ("Snowmass"). We present the future computing needs and plans of the U.S. lattice gauge theory community and argue that continued support of the U.S. (and worldwide) lattice-QCD effort is essential to fully capitalize on the enormous investment in the high-energy physics experimental program. We first summarize the dramatic progress of numerical lattice-QCD simulations in the past decade, with some emphasis on calculations carried out under the auspices of the U.S. Lattice-QCD Collaboration, and describe a broad program of lattice-QCD calculations that will be relevant for future experiments at the intensity and energy frontiers. We then present details of the computational hardware and software resources needed to undertake these calculations.

  17. Executive Committee Working Group: Women in Astronomy

    Science.gov (United States)

    Primas, Francesca; Maddison, Sarah; Primas, Francesca; Aerts, Conny; Clayton, Geoffrey; Combes, Françoise; Elmegreen, Debra; Feretti, Luigina; Jog, Chanda; Kobayashi, Chiaki; Lazzaro, Daniela; Liang, Yanchun; Mandrini, Cristina; Mathews, Brenda; Rovira, Marta

    2016-04-01

    The gender† dimension of science and technology has become one of the most important and debated issues worldwide, impacting society at every level. A variety of international initiatives on the subject have been undertaken, including the continued monitoring of the status of women in science by Unesco Institute for Statistics (UIS) or the annual reports ``Education at a Glance'' by the Organization for Economic Co-operation and Development (OECD) as well as field-related working groups and networking in order to collect data in a consistent manner. The majority of the international organizations have made clear statements about their discrimination policies (independently of their main field(s) of action), including the International Council for Science whose regulations are followed by the IAU. Gender equality at large is one of the eight United Nations Millennium Development Goals, which clearly calls for action related to science, technology and gender.

  18. Working Group Proposed to Preserve Archival Records

    Science.gov (United States)

    Bartlett, Jennifer L.

    2013-01-01

    The AAS and AIP co-hosted a Workshop in April 2012 with NSF support (AST-1110231) that recommends establishing a Working Group on Time Domain Astronomy (WGTDA) to encourage and advise on preserving historical observations in a form meaningful for future scientific analysis. Participants specifically considered archival observations that could describe how astronomical objects change over time. Modern techniques and increased storage capacity enable extracting additional information from older media. Despite the photographic plate focus, other formats also concerned participants. To prioritize preservation efforts, participants recommended considering the information density, the amount of previously published data, their format and associated materials, their current condition, and their expected deterioration rate. Because the best digitization still produces an observation of an observation, the originals should be retained. For accessibility, participants recommended that observations and their metadata be available digitally and on-line. Standardized systems for classifying, organizing, and listing holdings should enable discovery of historical observations through the Virtual Astronomical Observatory. Participants recommended pilot projects that produce scientific results, demonstrate the dependence of some advances on heritage data, and open new avenues of exploration. Surveying a broad region of the sky with a long time-base and high cadence should reveal new phenomena and improve statistics for rare events. Adequate financial support is essential. While their capacity to produce new science is the primary motivation for preserving astronomical records, their potential for historical research and citizen science allows targeting cultural institutions and other private sources. A committee was elected to prepare the WGTDA proposal. The WGTDA executive committee should be composed of ~10 members representing modern surveys, heritage materials, data management

  19. Charter for Systems Engineer Working Group

    Science.gov (United States)

    Suffredini, Michael T.; Grissom, Larry

    2015-01-01

    This charter establishes the International Space Station Program (ISSP) Mobile Servicing System (MSS) Systems Engineering Working Group (SEWG). The MSS SEWG is established to provide a mechanism for Systems Engineering for the end-to-end MSS function. The MSS end-to-end function includes the Space Station Remote Manipulator System (SSRMS), the Mobile Remote Servicer (MRS) Base System (MBS), Robotic Work Station (RWS), Special Purpose Dexterous Manipulator (SPDM), Video Signal Converters (VSC), and Operations Control Software (OCS), the Mobile Transporter (MT), and by interfaces between and among these elements, and United States On-Orbit Segment (USOS) distributed systems, and other International Space Station Elements and Payloads, (including the Power Data Grapple Fixtures (PDGFs), MSS Capture Attach System (MCAS) and the Mobile Transporter Capture Latch (MTCL)). This end-to-end function will be supported by the ISS and MSS ground segment facilities. This charter defines the scope and limits of the program authority and document control that is delegated to the SEWG and it also identifies the panel core membership and specific operating policies.

  20. Summary of the laser working group

    International Nuclear Information System (INIS)

    Bigio, I.J.; Kurnit, N.A.; Donaldson, W.R.; Srinivasan-Rao, T.

    1988-10-01

    The laser working group considered several options to deliver synchronized laser pulses of the required energy to the photocathode and laser triggered switches. These requirements actually decreased during the course of the workshop, and the values finally settled upon (<10 μJ in 100 fs at ∼250 nm for the photocathode and ∼20 mJ in 2 ps near either 250 nm or 1 μm for the switches) were considered to be well within the state of the art. Some development work may be required, however, to provide a system that has the desirable characteristics of stability, ease of use and low maintenance. The baseline concept, which is similar to a number of existing systems, utilizes doubled Nd:YAG-pumped dye oscillator/amplifiers to produce an upconverted picosecond pulse that can be amplified to tens of mJ in a KrF excimer laser. A fraction of the dye oscillator output is also compressed by means of a fiber-grating compressor and further amplified in a dye amplifier before being upconverted to produce the synchronized pulse for the photocathode. 9 refs., 1 fig

  1. Working group 1A - basis for the standard-safety

    International Nuclear Information System (INIS)

    Whipple, C.

    1993-01-01

    This paper presents a summary of the progress made by working group 1A (Basis for the Safety Standard) during the Electric Power Research Institute's EPRI Workshop on the technical basis of EPA HLW Disposal Criteria, March 1993. This group discussed the semantics of terms within the standard 40 CFR Part 191, the implementation of this standard, the advanced notice of rulemaking, the issue of emitting carbon-14 through a gaseous pathway, the strategy of dealing with standards for contamination of drinking water and groundwater, the 100,000 year time frame, and the analysis of specific comments. The specific comments dealt with the cost effectiveness of the standard, the dose histogram for populations and individuals, groundwater definition and the underlying technology driver for this standard

  2. THE HIGGS WORKING GROUP: SUMMARY REPORT.

    Energy Technology Data Exchange (ETDEWEB)

    DAWSON, S.; ET AL.

    2005-08-01

    This working group has investigated Higgs boson searches at the Tevatron and the LHC. Once Higgs bosons are found their properties have to be determined. The prospects of Higgs coupling measurements at the LHC and a high-energy linear e{sup +}e{sup -} collider are discussed in detail within the Standard Model and its minimal supersymmetric extension (MSSM). Recent improvements in the theoretical knowledge of the signal and background processes are presented and taken into account. The residual uncertainties are analyzed in detail. Theoretical progress is discussed in particular for the gluon-fusion processes gg {yields} H(+j), Higgs-bremsstrahlung off bottom quarks and the weak vector-boson-fusion (VBF) processes. Following the list of open questions of the last Les Houches workshop in 2001 several background processes have been calculated at next-to-leading order, resulting in a significant reduction of the theoretical uncertainties. Further improvements have been achieved for the Higgs sectors of the MSSM and NMSSM. This report summarizes our work performed before and after the workshop in Les Houches. Part A describes the theoretical developments for signal and background processes. Part B presents recent progress in Higgs boson searches at the Tevatron collider. Part C addresses the determination of Higgs boson couplings, part D the measurement of tan {beta} and part E Higgs boson searches in the VBF processes at the LHC. Part F summarizes Higgs searches in supersymmetric Higgs decays, part G photonic Higgs decays in Higgs-strahlung processes at the LHC, while part H concentrates on MSSM Higgs bosons in the intense-coupling regime at the LHC. Part I presents progress in charged Higgs studies and part J the Higgs discovery potential in the NMSSM at the LHC. The last part K describes Higgs coupling measurements at a 1 TeV linear e{sup +}e{sup -} collider.

  3. THE HIGGS WORKING GROUP: SUMMARY REPORT

    International Nuclear Information System (INIS)

    DAWSON, S.

    2005-01-01

    This working group has investigated Higgs boson searches at the Tevatron and the LHC. Once Higgs bosons are found their properties have to be determined. The prospects of Higgs coupling measurements at the LHC and a high-energy linear e + e - collider are discussed in detail within the Standard Model and its minimal supersymmetric extension (MSSM). Recent improvements in the theoretical knowledge of the signal and background processes are presented and taken into account. The residual uncertainties are analyzed in detail. Theoretical progress is discussed in particular for the gluon-fusion processes gg → H(+j), Higgs-bremsstrahlung off bottom quarks and the weak vector-boson-fusion (VBF) processes. Following the list of open questions of the last Les Houches workshop in 2001 several background processes have been calculated at next-to-leading order, resulting in a significant reduction of the theoretical uncertainties. Further improvements have been achieved for the Higgs sectors of the MSSM and NMSSM. This report summarizes our work performed before and after the workshop in Les Houches. Part A describes the theoretical developments for signal and background processes. Part B presents recent progress in Higgs boson searches at the Tevatron collider. Part C addresses the determination of Higgs boson couplings, part D the measurement of tan β and part E Higgs boson searches in the VBF processes at the LHC. Part F summarizes Higgs searches in supersymmetric Higgs decays, part G photonic Higgs decays in Higgs-strahlung processes at the LHC, while part H concentrates on MSSM Higgs bosons in the intense-coupling regime at the LHC. Part I presents progress in charged Higgs studies and part J the Higgs discovery potential in the NMSSM at the LHC. The last part K describes Higgs coupling measurements at a 1 TeV linear e + e - collider

  4. Combustion Dynamics Facility: April 1990 workshop working group reports

    Energy Technology Data Exchange (ETDEWEB)

    Kung, A.H.; Lee, Y.T.

    1990-04-01

    This document summarizes results from a workshop held April 5--7, 1990, on the proposed Combustion Dynamics Facility (CDF). The workshop was hosted by the Lawrence Berkeley Laboratory (LBL) and Sandia National Laboratories (SNL) to provide an opportunity for potential users to learn about the proposed experimental and computational facilities, to discuss the science that could be conducted with such facilities, and to offer suggestions as to how the specifications and design of the proposed facilities might be further refined to address the most visionary scientific opportunities. Some 130 chemical physicists, combustion chemists, and specialists in UV synchrotron radiation sources and free-electron lasers (more than half of whom were from institutions other than LBL and SNL) attended the five plenary sessions and participated in one or more of the nine parallel working group sessions. Seven of these sessions were devoted to broadening and strengthening the scope of CDF scientific opportunities and to detail the experimental facilities required to realize these opportunities. Two technical working group sessions addressed the design and proposed performance of two of the major CDF experimental facilities. These working groups and their chairpersons are listed below. A full listing of the attendees of the workshop is given in Appendix A. 1 tab.

  5. Working group report: methane emissions from biomass burning

    International Nuclear Information System (INIS)

    Delmas, R.A.; Ahuja, D.

    1993-01-01

    Biomass burning is a significant source of atmospheric methane. Like most other sources of methane, it has both natural and anthropogenic causes, although anthropogenic causes now predominate. Most of the estimates of methane emissions from biomass burning in the past have relied on a uniform emission factor for all types of burning. This results in the share of trace gas emissions for different types of burning being the same as the amounts of biomass burned in those types. The Working Group endorsed the extension of an approach followed for Africa by Delmas et al. (1991) to use different emission factors for different types of biomass burning to estimate national emissions of methane. This is really critical as emission factors present important variations. While the focus of discussions of the Working Group was on methane emissions from biomass burning, the Group endorsed the IPCC-OECD methodology of estimating all greenhouse related trace gases from biomass burning. Neither the IPCC-OECD nor the methodology suggested here applies to estimation of trace gas emissions from the processing of biomass to upgraded fuels. They must be estimated separately. The Group also discussed technical options for controlling methane emissions from biomass. 12 refs

  6. Grupo de Trabajo Para la Preparacion del Proyecto Sobre el Desarrolo de Servicias de Bibliotecas y de Informacion Cientifica y Tecnica (Working Group for the Preparation of the Proposal on the Development of Library Services and Scientific and Technical Information).

    Science.gov (United States)

    Oficina de Educacion Iberoamericana, Madrid (Spain).

    The Office of Iberoamerican Education, an intergovernmental body based on educational and cultural cooperation for the purpose of disseminating information, documentation, advice, and assistance in the field of education, co-sponsors (with UNESCO) the work represented in this study of library and information planning and facilities in the Andean…

  7. The International System of Units (SI) in Oceanography. Report of IAPSO Working Group on Symbols, Units and Nomenclature in Physical Oceanography (SUN). Unesco Technical Papers in Marine Science 45. IAPSO Publication Scientifique No. 32.

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Div. of Marine Sciences.

    This report introduces oceanographers to the International System of Units (SI) in physical oceanography. The SI constitutes a universal language, designed to be understood by all scientists. It facilitates their mutual comprehension and exchange of views and results of their work. The first part of the report is devoted to physical quantities,…

  8. ''High intensity per bunch'' working group

    International Nuclear Information System (INIS)

    2001-01-01

    Third Generation Light Sources are supposed to store high intensity beams not only in many tightly spaced bunches (multibunch operation), but also in few bunch or even single lunch modes of operation, required for example for time structure experiments. Single bunch instabilities, driven by short-range wake fields, however spoil the beam quality, both longitudinally and transversely. Straightforward ways of handling them, by pushing up the chromaticity (ζ = ΔQ/(Δp/p)) for example, enabled to raise the charge per bunch, but to the detriment of beam lifetime. In addition, since the impedance of the vacuum chamber deteriorates with the installation of new insertion devices, the current thresholds tend to dope down continuously. The goal of this Working Group was then to review these limitations in the existing storage rings, where a large number of beam measurements have been performed to characterise them, and to discuss different strategies which are used against them. About 15 different laboratories reported on the present performance of storage rings, experiences gained in high charge per bunch, and on simulation results and theoretical studies. More than 25 presentations addressed the critical issues and stimulated the discussion. Four main topics came out: - Observation and experimental data; - Impedance studies and tracking codes; - Theoretical investigations; - Cures and feedback. (author)

  9. Working group report on wetlands and wildlife

    International Nuclear Information System (INIS)

    Teels, B.

    1991-01-01

    The results and conclusions of a working group held to discuss the state of knowledge and knowledge gaps concerning climatic change impacts on wetlands and wildlife are presented. Prairie pothole wetlands are extremely productive and produce ca 50% of all ducks in North America. The most productive, and most vulnerable to climate change, are small potholes, often less than one acre in area. Changes in water regimes and land use will have more impact on wildlife than changes in temperature. There are gaps in knowledge relating to: boreal wetlands and their wildlife, and response to climate; wetland inventories that include the smallest wetlands; coordinated schemes for monitoring status and trends of wetlands and wildlife; and understanding of ecological relationships within wetlands and their wildlife communities. Recommendations include: coordinate and enhance existing databases to provide an integrated monitoring system; establish research programs to increase understanding of ecological relationships within wetland ecosystems; evaluate programs and policies that affect wetlands; and promote heightened public awareness of general values of wetlands

  10. Beam-beam interaction working group summary

    International Nuclear Information System (INIS)

    Siemann, R.H.

    1995-01-01

    The limit in hadron colliders is understood phenomenologically. The beam-beam interaction produces nonlinear resonances and makes the transverse tunes amplitude dependent. Tune spreads result from the latter, and as long as these tune spreads do not overlap low order resonances, the lifetime and performance is acceptable. Experience is that tenth and sometimes twelfth order resonances must be avoided, and the hadron collider limit corresponds roughly to the space available between resonances of that and lower order when operating near the coupling resonance. The beam-beam interaction in e + e - colliders is not understood well. This affects the performance of existing colliders and could lead to surprises in new ones. For example. a substantial amount of operator tuning is usually required to reach the performance limit given above, and this tuning has to be repeated after each major shutdown. The usual interpretation is that colliding beam performance is sensitive to small lattice errors, and these are being reduced during tuning. It is natural to ask what these errors are, how can a lattice be characterized to minimize tuning time, and what aspects of a lattice should receive particular attention when a new collider is being designed. The answers to this type of question are not known, and developing ideas for calculations, simulations and experiments that could illuminate the details of the beam-beam interaction was the primary working group activity

  11. Working group report on water resources

    International Nuclear Information System (INIS)

    Baulder, J.

    1991-01-01

    The results and conclusions of a working group held to discuss climate change implications for water resources are presented. The existing water resources and climatological databases necessary to develop models and functional relationships lack integration and coordination. The density and spatial distribution of the existing sampling networks for obtaining necessary climatological data is inadequate, especially in areas of complex terrain, notably higher elevations in the Rocky Mountains. Little information and knowledge is available on potential socio-economic responses that can be anticipated from either increases in climate variability or major change. Recommended research initiatives include the following. Basic functional relationships between climatic events, climatic variability and change, and both surface and groundwater hydrologic processes need to be investigated and improved. Basin-scale and regional-scale climatic models need to be developed, tested, and interfaced with existing global climate models. Public sector attitudes to water management issues and opportunities need to be investigated, and integrated scientific, socio-economic, multidisciplinary, regional databases on climatic change and variability and associated processes need to be developed

  12. Switched power workshop power supply working group

    International Nuclear Information System (INIS)

    Haseroth, H.; Hopkins, D.; Ikezi, H.; Kirbie, H.; Lincke, E.; Wilson, M.

    1988-01-01

    The power supply working group was assigned the problem of pulse charging the 3-MeV gun. The gun is a radial line structure that has two charging configurations: a single ring charged to 500 kV or nine rings charged from 100 to 200 kV. In either configuration, the pulsed source must rapidly charge the structure's ring(s) before breakdown can begin. The issues encountered in charging the structure can be divided into two categories. First, the charging system must be well matched to the gun structure. Proper impedance matching will avoid reflections and limit the fault current if the ring should spark. Second, several systems can achieve the wide range of charge voltages necessary. Some are better suited to high voltages, while others are better at low voltages. The following paragraphs will address the impedance matching issues are review three choices for pulse generators. A system for each type of source is described along with a very rough cost estimate. 1 ref., 4 figs., 2 tabs

  13. International Space Station Earth Observations Working Group

    Science.gov (United States)

    Stefanov, William L.; Oikawa, Koki

    2015-01-01

    The multilateral Earth Observations Working Group (EOWG) was chartered in May 2012 in order to improve coordination and collaboration of Earth observing payloads, research, and applications on the International Space Station (ISS). The EOWG derives its authority from the ISS Program Science Forum, and a NASA representative serves as a permanent co-chair. A rotating co-chair position can be occupied by any of the international partners, following concurrence by the other partners; a JAXA representative is the current co-chair. Primary functions of the EOWG include, 1) the exchange of information on plans for payloads, from science and application objectives to instrument development, data collection, distribution and research; 2) recognition and facilitation of opportunities for international collaboration in order to optimize benefits from different instruments; and 3) provide a formal ISS Program interface for collection and application of remotely sensed data collected in response to natural disasters through the International Charter, Space and Major Disasters. Recent examples of EOWG activities include coordination of bilateral data sharing protocols between NASA and TsNIIMash for use of crew time and instruments in support of ATV5 reentry imaging activities; discussion of continued use and support of the Nightpod camera mount system by NASA and ESA; and review and revision of international partner contributions on Earth observations to the ISS Program Benefits to Humanity publication.

  14. Neutron radiography working group test programme

    International Nuclear Information System (INIS)

    Domanus, J.C.

    1989-03-01

    Scope and results of the Euratom Neutron Radiography Working Group Test Program are described. Seven NR centers from six European Community countries have performed this investigation using eleven NR facilities. Four test items were neutron radiographed using 30 different film/converter combinations. From film density measurements neutron beam components were determined. Radiographic sensitivity was assessed from visual examinations of the radiographs. About 25,000 dimensional measurements were made and were used for the assessment of accuracies of dimensional measurements from neutron radiographs. The report gives a description of the test items used for the Test Program, the film density and dimensional measurements, and concentrates on the assessment of the measuring results. The usefulness of the beam purity and sensitivity indicators was assessed with the conclusion that they are not suitable for neutron radiography of nuclear reactor fuel. Ample information is included in the report about measuring accuracies which can be reached in dimensional measurements of fuel pins. After a general comparison of measuring accuracies is discussed. Results from different NR facilities are treated separately as are the different kinds of dimensions of the fuel pins. Finally human and instrument factors are discussed. After presenting final conclusions (which take into account the above-mentioned factors) results of other investigations about dimensional measurements are shortly reviewed

  15. Working group written presentation: Atomic oxygen

    International Nuclear Information System (INIS)

    Leger, L.J.; Visentine, J.T.

    1989-01-01

    Earlier Shuttle flight experiments have shown NASA and SDIO spacecraft designed for operation in low-Earth orbit (LEO) must take into consideration the highly oxidative characteristics of the ambient flight environment. Materials most adversely affected by atomic oxygen interactions include organic films, advanced (carbon-based) composites, thermal control coatings, organic-based paints, optical coatings, and thermal control blankets commonly used in spacecraft applications. Earlier results of NASA flight experiments have shown prolonged exposure of sensitive spacecraft materials to the LEO environment will result in degraded systems performance or, more importantly, lead to requirements for excessive on-orbit maintenance, with both conditions contributing significantly to increased mission costs and reduced mission objectives. Flight data obtained from previous Space Shuttle missions and results of the Solar Max recovery mission are limited in terms of atomic oxygen exposure and accuracy of fluence estimates. The results of laboratory studies to investigate the long-term (15 to 30 yrs) effects of AO exposure on spacecraft surfaces are only recently available, and qualitative correlations of laboratory results with flight results have been obtained for only a limited number of materials. The working group recommended the most promising ground-based laboratories now under development be made operational as soon as possible to study the full-life effects of atomic oxygen exposure on spacecraft systems

  16. TAP Report - Southwest Idaho Juniper Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Gresham, Garold Linn [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    There is explicit need for characterization of the materials for possible commercialization as little characterization data exists. Pinyon-juniper woodlands are a major ecosystem type found in the Southwest and the Intermountain West regions of the United States including Nevada, Idaho and Oregon. These widespread ecosystems are characterized by the presence of several different species of pinyon and juniper as the dominant plant cover. Since the 1800s, pinyon-juniper woodlands have rapidly expanded their range at the expense of existing ecosystems. Additionally, existing woodlands have become denser, progressively creating potential fire hazards as seen in the Soda Fire, which burned more than 400 sq. miles. Land managers responsible for these areas often desire to reduce pinyon-juniper coverage on their lands for a variety of reasons, as stated in the Working Group objectives. However, the cost of clearing thinning pinyon-juniper stands can be prohibitive. One reason for this is the lack of utilization options for the resulting biomass that could help recover some of the cost of pinyon-juniper stand management. The goal of this TAP effort was to assess the feedstock characteristics of biomass from a juniper harvested from Owyhee County to evaluate possible fuel and conversion utilization options.

  17. Switched power workshop: Power supply working group

    International Nuclear Information System (INIS)

    Haseroth, H.; Hopkins, D.; Ikezi, H.; Kirbie, H.C.; Lincke, E.; Wilson, M.

    1989-01-01

    The power supply working group was assigned the problem of pulse charging the 3-MeV gun. The gun is a radial line structure that has two charging configurations: a single ring charged to 500 kV or nine rings charged from 100 to 200 kV. In either configuration, the pulsed source must rapidly charge the structure's ring(s) before breakdown can begin. The issues encountered in charging the structure can be divided into two categories. First, the charging system must be well matched to the gun structure. Proper impedance matching will avoid reflections and limit the fault current if the ring should spark. Second, several systems can achieve the wide range of charge voltages necessary. Some are better suited to high voltages, while others are better at low voltages. The following paragraphs will address the impedance matching issues and review three choices for pulse generators. A system for each type of source is described along with a very rough cost estimate. 1 ref., 4 figs., 2 tabs

  18. Working with Group-Tasks and Group Cohesiveness

    Science.gov (United States)

    Anwar, Khoirul

    2016-01-01

    This study aimed at exploring the connection between the use of group task and group cohesiveness. This study is very important because the nature of the learner's success is largely determined by the values of cooperation, interaction, and understanding of the learning objectives together. Subjects of this study are 28 students on the course…

  19. Nuclear power plant diagnostics - Safety aspects and licensing. Report of a technical committee meeting. Working material

    International Nuclear Information System (INIS)

    1997-01-01

    The aim of the Technical Committee Meeting (TCM) was to review developed systems and methods in diagnostics in the scope of their impacts and importance to the safety of Nuclear Power Plants. Papers presented on TCM came from different sources, from developers, from manufacturers, from licensing authorities and from NPP personal. They reflect up to date status in the given subject. Participants of TCM formulated three working groups to elaborate different questions which were raised during the discussions. Their results are reflected in the three chapter titles of the given material. Annex 1 to this document contains presentations made at the Technical Committee Meeting. Refs, figs, tabs

  20. Technical Site Information: Planning group of the Directorate and Conventional Construction Division

    International Nuclear Information System (INIS)

    1993-11-01

    This document presents the technical site information for the Superconducting Super Collider project. The Ellis County, Texas site was selected by the Department of Energy in 1989. After assembling the initial staff at temporary facilities in Dallas, the SSC Laboratory began site-specific design work. The resulting design for the SSC accelerators, experimental areas, and laboratory facilities were described in the Site-Specific Conceptual Design Report of July 1990. Since then, design specifications for the technical components and conventional facilities have been formulated. In fact, a very significant amount of surface and underground construction has been initiated and many buildings have been completed. Testing of prototypes for most technical components is advanced. The construction phase of the SSC project is approximately 20% complete. At this time, it is appropriate to capture the conventional design work which has taken place since 1990. This documents records regional and physical information used in site studies, summarizes the site studies for conventional facilities, and presents site layouts for buildings and utilities as they would have been at the end of the construction project. As such, this documents summarizes and complements the work of many groups in the SSC laboratory, the Texas National Research Laboratory Commission (TNRLC), and several subcontractors to the SSC project. The document contains extensive references to their work contained in other drafts and final reports. In particular, it borrows heavily from the Site Development Plan (released in draft form in January, 1992) which has, to date, guided aspects of site development

  1. Technical Site Information: Planning group of the Directorate and Conventional Construction Division

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-11-01

    This document presents the technical site information for the Superconducting Super Collider project. The Ellis County, Texas site was selected by the Department of Energy in 1989. After assembling the initial staff at temporary facilities in Dallas, the SSC Laboratory began site-specific design work. The resulting design for the SSC accelerators, experimental areas, and laboratory facilities were described in the Site-Specific Conceptual Design Report of July 1990. Since then, design specifications for the technical components and conventional facilities have been formulated. In fact, a very significant amount of surface and underground construction has been initiated and many buildings have been completed. Testing of prototypes for most technical components is advanced. The construction phase of the SSC project is approximately 20% complete. At this time, it is appropriate to capture the conventional design work which has taken place since 1990. This documents records regional and physical information used in site studies, summarizes the site studies for conventional facilities, and presents site layouts for buildings and utilities as they would have been at the end of the construction project. As such, this documents summarizes and complements the work of many groups in the SSC laboratory, the Texas National Research Laboratory Commission (TNRLC), and several subcontractors to the SSC project. The document contains extensive references to their work contained in other drafts and final reports. In particular, it borrows heavily from the Site Development Plan (released in draft form in January, 1992) which has, to date, guided aspects of site development.

  2. Group work is political work: a feminist perspective of interpersonal group psychotherapy.

    Science.gov (United States)

    Bender, A; Ewashen, C

    2000-01-01

    When practicing as group leaders, mental health nurses often incorporate Irvin Yalom's (1995, 1998) concepts of social microcosm and here-and-now. This article examines these concepts from a feminist perspective and offers an approach to group psychotherapy that processes gender issues and fosters collective consciousness-raising. A feminist perspective in group therapy challenges us to view the social microcosm as a reenactment of sociopolitical contexts and the here-and-now as a medium for developing personal and social responsibility. Therapy is not only about individual and interpersonal change in group members, but is an opportunity for healthy social change. Therapy becomes political work, raising the social consciousness of each participant as well as the group as a whole.

  3. Occupational exposure to ambient electromagnetic fields of technical operational personnel working for a mobile telephone operator

    International Nuclear Information System (INIS)

    Chauvin, S.; Gibergues, M. L.; Wuethrich, G.; Picard, D.; Desreumaux, J. P.; Bouillet, J. C.

    2009-01-01

    In order to investigate the exposure of operational personnel to radiofrequency electromagnetic fields when working for a mobile telephone operator, exposimeters were used to make individual records on 23 Technical Operations personnel (mobile telephone maintenance staff) and also on 22 Other Workers. The exposure densities, to which each of the 45 subjects was subjected, were quantified using 229 exposure indicators. Cluster analysis techniques were applied to the data, in an attempt to show that they would re-emerge as belonging to one of the two groups, i.e. the Technical Operational Personnel group or the Other Workers group. This exploratory investigation has shown that the cluster analysis does not reveal a sufficiently reliable emergence of the two groups, even though certain exposure indicators were significantly different for the two groups. In addition, the use of a Learning Group method does not lead to the discovery of a predictive law that could identify the Technical Operational Personnel as a sub-group within the overall group. (authors)

  4. Group Chaos Theory: A Metaphor and Model for Group Work

    Science.gov (United States)

    Rivera, Edil Torres; Wilbur, Michael; Frank-Saraceni, James; Roberts-Wilbur, Janice; Phan, Loan T.; Garrett, Michael T.

    2005-01-01

    Group phenomena and interactions are described through the use of the chaos theory constructs and characteristics of sensitive dependence on initial conditions, phase space, turbulence, emergence, self-organization, dissipation, iteration, bifurcation, and attractors and fractals. These constructs and theoretical tenets are presented as applicable…

  5. Working group investigates the electrical technology of the nineties

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    The article describes the terms of reference of the Working Group charged with clarifying the technical and economic as well as environmental prerequisites for new electrical supplies as a basis for decisions concerning practical application during the 1990's in Sweden. The article reports that electrical production in Sweden for the rest of this century will be principally based on conventional processes using fuels available within the country. And that further development of such processes will, to a certain extent be based on commercial principles. Over and above this, special efforts are motivated within the Energy Research Programme principally in the fields of the environment and the efficient combustion of fuels including nuclear fusion. The article also includes a list of facts covering the smooth integration of the various energy systems within the Swedish infrastructure. (H.J.P.)

  6. HIDE working groups: synchrotron based system: summary

    International Nuclear Information System (INIS)

    Barton, M.Q.

    1978-01-01

    A brief overview is given of the work resulting from a one-week workshop on the use of synchrotrons in heavy ion fusion, i.e., a Heavy Ion Demonstration Experiment (HIDE). Topics discussed concerned the number of beams on target, space charge limitations, choice of ion charge state, and areas identified as needing further work

  7. 75 FR 34476 - Glen Canyon Dam Adaptive Management Work Group

    Science.gov (United States)

    2010-06-17

    ... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Glen Canyon Dam Adaptive Management Work Group... Management Work Group. The purpose of the Adaptive Management Work Group is to advise and to provide... of the Glen Canyon Dam Adaptive Management Work Group is in the public interest in connection with...

  8. MIND - group formulation of a collaborative technical programme

    International Nuclear Information System (INIS)

    McCabe, A.M.

    1989-03-01

    The proceedings of the 2nd meeting of the Microbiology in Nuclear Waste Disposal (MIND) are reviewed. It has been recognised that microbiological effects may be significant in many radioactive waste repository types and may play a major role in some disposal concepts. The present state of research in this field and funding for it was reviewed at the meeting. The particular research areas discussed were microbial transport processes and near and far-field processes. Methodologies were discussed, recognising the wide gulf which exists between chemists and microbiologists in their approach to waste disposal. A list of emphases for future work within the MIND group arising out of current research was drawn up. The Appendices include a paper on the interactions of metal ions with components of bacterial cell walls and their biomineralisation; and another on the potential effects of microorganisms on trace element transport. (UK)

  9. Technical Work Plan for: Thermodynamic Databases for Chemical Modeling

    International Nuclear Information System (INIS)

    C.F. Jovecolon

    2006-01-01

    The objective of the work scope covered by this Technical Work Plan (TWP) is to correct and improve the Yucca Mountain Project (YMP) thermodynamic databases, to update their documentation, and to ensure reasonable consistency among them. In addition, the work scope will continue to generate database revisions, which are organized and named so as to be transparent to internal and external users and reviewers. Regarding consistency among databases, it is noted that aqueous speciation and mineral solubility data for a given system may differ according to how solubility was determined, and the method used for subsequent retrieval of thermodynamic parameter values from measured data. Of particular concern are the details of the determination of ''infinite dilution'' constants, which involve the use of specific methods for activity coefficient corrections. That is, equilibrium constants developed for a given system for one set of conditions may not be consistent with constants developed for other conditions, depending on the species considered in the chemical reactions and the methods used in the reported studies. Hence, there will be some differences (for example in log K values) between the Pitzer and ''B-dot'' database parameters for the same reactions or species

  10. and collider physics: Working group report

    Indian Academy of Sciences (India)

    Theory Group, Physical Research Laboratory, Navrangpura, Ahmedabad 380 ... One such is anomaly mediation, wherein there is no tree level coupling ..... The role of the spectator quarks effect in the inclusive beauty decays were studied.

  11. Task reports of INFCE Working Group 6

    International Nuclear Information System (INIS)

    Task 1 Report summarizes on a country-by-country basis the data supplied by the participating states related to nuclear power forecast, spent fuel generation, AR storage capacity, AFR storage capacity, AFR storage and transport systems. Task Reports 2-5 analyse the spent fuel storage and transport situation according to reactor types. Information on the technical description of spent fuel existing storage and transport techniques and techniques under development and on costs is given. Task 6 summarizes the present legal framework for spent fuel management related to licensing, safety, environmental and physical protection, accounting and control of nuclear material by states, non-proliferation of nuclear weapons, assurances for national access to nuclear material contained in spent fuel, and protection of technology. The institutional practice for spent fuel storage and transport is described. For the period up to the year 2025 a prognosis and recommendations related to legal framework and institutional models are given. The special needs of developing countries and industrialized countries with a limited nuclear power programme with respect to spent fuel management are analysed in Task Reports 7 and 8

  12. Information behavior in dynamic group work contexts

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.; Pierce, Linda G.

    2000-01-01

    personnel and documentation on C2. During data analysis, three important themes that highlight the why, what, how and consequences of information behavior in C2 emerged. The first is the concept of interwoven situational awareness consisting of individual, intragroup and intergroup shared understanding...... of the situation. Interwoven situational awareness appears to facilitate response to dynamic, constraint-bound situations. The second theme describes the need for dense social networks or frequent communication between participants about the work context and situation, the work process and domain...

  13. Standard compensation for power cuts. Working group report

    International Nuclear Information System (INIS)

    2002-07-01

    The Working Group was commissioned to draw up a proposal in the form of a Government Bill for provisions to be included in the Electricity Market Act on imposing an obligation on the distribution net operator to pay a standard compensation to the users of electricity for the event that they get no access to electricity. The Working Group should consider especially a model of standard compensation presented in the final report by Mr. Jarl Forsten, Deputy Director General of the Technical Research Centre of Finland VTT, published on 30 April 2002 that the amount of standard compensation should not depend on the reason for the power cut. The Working Group proposes that the Electricity Market Act should be amended by provisions providing that a distribution net operator shall pay to the user of electricity a standard compensation for power cuts lasting over 12 hours. The amount of compensation shall be based on the annual network service fee and a sliding scale of compensation related to the duration of the power cut shall be applied. The maximum compensation shall be paid when the power cut lasts more than five days. The maximum amount of individual compensations shall be fixed at EUR 700. The proposed provisions on standard compensation in the event of power cuts are aimed at amending the provisions in Chapter 6a of the Electricity Market Act on price reduction and compensation because of fault in the supply of electricity. The aim of the introduction of standard compensation for power cuts is to persuade distribution net operators to make an effort to minimize the time for power cuts. (orig.)

  14. HIDE working groups. A. Synchrotron based system

    International Nuclear Information System (INIS)

    Barton, M.Q.

    1977-01-01

    A summary is given of a week's discussions on an ion source to target scenario for a synchrotron for heavy ion fusion. Topics considered include: the number of beams on the target; beam dynamics; and a number of areas explicitly identified as needing further work

  15. Year-end technical stop: train to work safely

    CERN Multimedia

    Rosaria Marraffino

    2016-01-01

    As mentioned in the previous issue of the Bulletin (see here), the accelerators are currently undergoing maintenance as part of the year-end technical stop (YETS). Hundreds of people are working simultaneously on different machines, and many of them need to be trained in order to work safely underground. From a Safety Training point of view, this has resulted in a significant increase in training requests, most of them at the last minute, which are now being handled – but not without difficulties.     In the LHC mock-up, a helium leak is simulated. In this stressful situation, the trainees learn how to put their mask on in less than 40 seconds.   "The most requested course is the Self-Rescue Mask classroom training,” explains Christoph Balle, Safety Training Section Leader. “In this course, people are trained to face the oxygen deficiency hazards that may occur in CERN's underground areas, learning...

  16. FY 1992 work plan and technical progress reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-11-01

    The Desert Research Institute (DRI) is a division of the University of Nevada System devoted to multidisciplinary scientific research. For more than 25 years, DRI has conducted research for the US Department of Energy`s Nevada Field Office (DOE/NV) in support of operations at the Nevada Test Site (NTS). During that time, the research program has grown from an early focus on hydrologic studies to include the areas of geology, archaeology, environmental compliance and monitoring, statistics, database management, public education, and community relations. The range of DRI`s activities has also expanded to include a considerable amount of management and administrative support in addition to scientific investigations. DRI`s work plan for FY 1992 reflects a changing emphasis in DOE/NV activities from nuclear weapons testing to environmental restoration and monitoring. Most of the environmental projects from FY 1991 are continuing, and several new projects have been added to the Environmental Compliance Program. The Office of Technology Development Program, created during FY 1991, also includes a number of environmental projects. This document contains the FY 1992 work plan and quarterly technical progress reports for each DRI project.

  17. AER Working Group B activities in 2009

    International Nuclear Information System (INIS)

    Darilek, P.

    2009-01-01

    Regular meeting of Core Design Group was organized by SKODA JS a.s. in Plzen (Czech Republic) during the period of 4 to 6 May 2009. There were presented altogether 17 participants from 7 member organizations and 7 presentations were read. Presented papers covered topics as follows: 1) Two presentations dealt with upgrade of calculation and display tools. 2) Three presentations were devoted to benchmark calculations. 3) Two presentations informed about gradual improvement of fuel assembly and cycle for VVER-440 reactors

  18. R and D activities of the ESARDA NDA working group

    International Nuclear Information System (INIS)

    Guardini, S.; Bignan, G.

    1999-01-01

    The aim of this paper is to report the R and D activities of the ESARDA Working Group on Techniques and Standards for Non-Destructive Analysis (NDA), as well as to discuss the role and possibilities of the group in the modern R and D scenario in safeguards and non-proliferation. The main tasks of the ESARDA NDA Working have been identified as being to: Define needs for procedural standards and reference materials; Design and manage the production and characterisation of reference materials; Assess and contribute to improving the performances of NDA techniques; Set up and maintain a list of NDA instruments and methods currently used for Safeguards purposes; and, through the above activities, assist Operators and Safeguards Authorities in their duty of Safeguards implementation. Members and observers appointed to the working group represent plant operators, the nuclear industry, R and D laboratories, NDA instrument developers and both safeguards control authorities. The participation of major European plant operators and of the EURATOM Safeguards Directorate and IAEA has always been assured and contributes to the good outcome of the WG activities. The ongoing R and D activities of the NDA Working Group are: Monte Carlo performance intercomparisons; 242 Pu accuracy assessment and improvement; NDA Sampling errors; General NDA performance evaluations. Some milestones have recently been reached: The 242 Pu uncertainty improvement project is coming to an end with the issuing of a new isotopic correlation; The NCC 'reals' evaluation and the Monte Carlo round robin is producing its first results; The Uranium Enrichment Round Robin Exercise has been completed; The waste drum standards are being characterised and constructed: they will be available by spring 1998. The round robin amongst laboratories will then start: summer 1998. Future activities comprise, beside the above issues, technical problems linked with the new challenges posed by new regimes of safeguards and non

  19. Working Group Report: Dark Energy and CMB

    Energy Technology Data Exchange (ETDEWEB)

    Dodelson, S.; Honscheid, K.; Abazajian, K.; Carlstrom, J.; Huterer, D.; Jain, B.; Kim, A.; Kirkby, D.; Lee, A.; Padmanabhan, N.; Rhodes, J.; Weinberg, D.

    2013-09-20

    The American Physical Society's Division of Particles and Fields initiated a long-term planning exercise over 2012-13, with the goal of developing the community's long term aspirations. The sub-group "Dark Energy and CMB" prepared a series of papers explaining and highlighting the physics that will be studied with large galaxy surveys and cosmic microwave background experiments. This paper summarizes the findings of the other papers, all of which have been submitted jointly to the arXiv.

  20. Government's role in power supply security. A working group report

    International Nuclear Information System (INIS)

    2004-01-01

    The working group was to analyse the Government's role in terms of improving the security of supply of the electricity market in exceptionally difficult capacity situations and to make propositions for the ways of arranging a tendering procedure concerning security of supply and capacity control, so as to meet the requirements of the EC Energy Internal Market Directives after 1 July 2004. The Working Group considers that there is no need at this stage to introduce a separate new system intended as a supplement to technical reserves in Finland. Such a system would not bring new capacity for the use of the power system, and in the case of existing capacity, production would only be transferred from one market to another. However, the situation may change from this, if there occur such factors on the market that aim to raise the market price of electricity or if it turned out that reserve power plants would be decommissioned on a large scale. The working group proposes that such a provision be added to the Electricity Market Act that would oblige the electricity supplier to notify the Energy Market Authority of a planned service outage of a power plant of at least 100 MVA producing electricity separately, which would fall within the time period 1 December - 28 February. The Energy Market Authority would be vested with the powers to postpone the outage due to a tight output situation, if there are not technical or safety- bound obstacles to this. It is important for the sufficiency of the power need of the Internal Market that the price signals of the market are reflected to both producers and consumers of electricity. The working group further proposes that the Ministry of Trade and Industry would look into development of the meter-reading requirements, so that they would, for their part, create the conditions for price flexibility in power consumption and for new sales products of electricity. In addition, tightening of the hourly metering requirement related to the

  1. Summary Report of Working Group: Laser-Plasma Acceleration

    International Nuclear Information System (INIS)

    Esarey, Eric; Schroeder, Carl B.; Tochitsky, Sergei; Milchberg, Howard M.

    2004-01-01

    A summary is given on the work presented and discussed in the Laser-Plasma Acceleration Working Group at the 2004 Advanced Accelerator Concepts Workshop, including the Plasma Acceleration Subgroup (Group-Leader: Eric Esarey; Co-Group-Leader: Sergei Tochitsky) and the Plasma Guiding Subgroup (Group-Leader: Howard Milchberg; Co-Group-Leader: Carl Schroeder)

  2. Working group 2: regulatory and standards development

    Energy Technology Data Exchange (ETDEWEB)

    Bunch, Chad; Lee, Shu; Peters, Mike; Parsonage, Kevin; Saad, Ziad

    2011-07-01

    This second workshop explored regulatory standards and developments in the pipeline industry. New methods of improved damage prevention for regulators and pipelines to implement were presented. First, incident trends were discussed, using incident analysis to identify the possible causes and solutions of incidents. The determination of realistic goals was attempted. Next, leak detection was discussed with the presentation of current work in annex E which will form part of the new CSA Z662 standard in a few years time. New testing methods such as external methods of leak detection were studied. A third presentation showed the recent development in overpressure protection with reference to the new annex M incorporated in the CSA Z662-11 standard. The last presentation introduced the topic of public safety issues associated with CO2 pipelines with regard to different failure scenarios and the appropriate emergency responses.

  3. The Emissions-Free Energy (EFE) Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Humphries, R., E-mail: Roger.Humphries@amec.com [AMEC NSS, Toronto, Ontario (Canada)

    2014-07-01

    There has been a growing international interest in smaller, simpler reactors for generating electricity and process heat. They incorporate modern technological advances in reactor design, reactor safety, modular construction, proliferation resistance, and risk reduction. The interest in these reactors has been driven by many factors, including the need to reduce greenhouse gas emissions and provide reliable power in 'off-grid' or 'edge-of-grid' locations. Licensing these new small reactors, particularly in Canada's resource rich remote northern regions, will raises issues in a wide variety of technical, institutional, socio-economic and regulatory policy areas. The first small reactor vendor to file a license application or to engage the CNSC in its pre-licensing vendor design review process is going to have to deal with these issues. However these issues affect the entire small reactor industry and it is essential that the industry as a whole address them. Accordingly, a small reactor industry-wide Working Group has been established to identify and prioritize the issues that need to be addressed and work with the CNSC and other interested stakeholders to agree on a resolution acceptable to all parties. The objective of the small reactor industry is to introduce an economical, emissions-free source of electrical and thermal energy. It is the opinion of the WG that our emphasis ought to be on the product rather than the technology, hence the name Emissions-Free Energy Working Group. The EFE WG has initiated contact with the CNSC and has started its review of CNSC draft regulatory and guidance documents. (author)

  4. Report of the Working Design Group

    Science.gov (United States)

    1992-01-01

    The engineering study group in the LOUISA workshop was responsible for producing a preliminary general design for an optical synthetic aperture telescope on the Moon. This design is intended to be a test case for focusing continuing design studies. The scope of the design included consideration of the array geometry, individual telescopes, metrology, site attributes, and construction. However, no attempt was made to go into further depth in the design than to cover the essential characteristics of the instrument. The starting point for the array design was the lunar optical array discussed by Burke (1985). His array geometry followed the design and correlation procedure of the 27-element Very Large Array (VLA) radio telescopes near Socorro, New Mexico.

  5. Report from the neutron diffraction work group

    International Nuclear Information System (INIS)

    1978-08-01

    This progress report of the neutron diffraction group at the Hahn Meitner Institute in Berlin comprises the following contributions: Three-dimensional critical properties of CsNiF 3 around the Neel point; Spin waves in CsNiF 3 with an applied magnetic field; Solitons in CsNiF 3 : Their experimental evidence and their thermodynamics; Neutron diffraction study of DAG at very low temperatures and in external magnetic field; Neutron diffraction investigation of tricritical behaviour in DyPO 4 ; Crystalline modifications and structural phase transitions of NaOH; Gitterdynamik von Cerhydrid; Investigation of the ferroelectric-ferroelastic phase transition in KH 2 PO 4 and RbH 2 PO 4 by means of γ-ray diffractometry; A γ-ray diffractometer for systematic measurements of absolute structure factors; Electron density in pyrite by combined γ-ray and neutron diffraction measurements: Thermal parameters from short wavelength neutron data; Accurate determination of temperature parameters from neutron diffraction data: Direct observation of the thermal diffuse scattering from silicon using perfect crystals; A Compton spectrometer for momentum density studies using 412 keV γ-radiation; Investigation of the electronic structure of Niobiumhydrides by means of gamma-ray Compton scattering; Interpretation of Compton profile data in position space; High resolution neutron scattering measurements on single crystals using a horizontally bent monochromator and a multidetecter; Statistical analysis of neutron diffraction studies of proteins. (orig.) [de

  6. Health in Transportation Working Group 2016 Annual Report

    Science.gov (United States)

    2017-06-30

    The Health in Transportation Working Group 2016 Annual Report provides an overview of the Working Groups activities and accomplishments in 2016, summarizes other USDOT health-related accomplishments, and documents its progress toward the recommend...

  7. Uganda group works to reduce AIDS' impact.

    Science.gov (United States)

    Mcbrier, P

    1996-10-01

    War and AIDS-related mortality in Uganda have created an estimated 1.2 million orphans in the country. Child welfare advocates and nongovernmental organizations (NGOs) have therefore been working together for the past 4 years under an umbrella organization to coordinate efforts for vulnerable children. The Uganda Community-Based Association for Child Welfare (UCOBAC), links people and organizations involved in child advocacy, facilitates relations between the government and NGOs, and helps to strengthen the capacity of NGOs to identify and implement projects. UCOBAC emphasizes community-based initiatives which allow children to remain in their own communities instead of being institutionalized. One example of such an approach is a vocational skills training program in Rakai district established to help young orphans trying to make it on their own. More than 300 youths had benefitted from the program as of December 1994 and plans are underway to expand the program to 10 more districts. UCOBAC is also training communities and NGOs to identify and implement viable projects, and helps child welfare organizations by serving as a network for sharing information. UCOBAC came into existence in October 1990 with 93 members, including 57 local NGOs, 17 international NGOs, and 19 individual members. The organization has since established local offices in 35 of Uganda's 39 districts. UNICEF has thus far provided about US$130,000 for UCOBAC activities and will continue to fund local NGO initiatives through UCOBAC. UCOBAC, however, is giving priority to becoming financially independent of UNICEF within a couple of years. Future projects include an inventory of NGO child welfare projects, a child welfare resource library, and networking workshops with NGOs and government policymakers.

  8. Student Collaboration in Group Work: Inclusion as Participation

    Science.gov (United States)

    Forslund Frykedal, Karin; Hammar Chiriac, Eva

    2018-01-01

    Group work is an educational mode that promotes learning and socialisation among students. In this study, we focused on the inclusive processes when students work in small groups. The aim was to investigate and describe students' inclusive and collaborative processes in group work and how the teacher supported or impeded these transactions. Social…

  9. Learning rights, participation and toleration in student group work

    DEFF Research Database (Denmark)

    Wiberg, Merete

    2013-01-01

    . This article offers a moral perspective on group work by introducing a concept of ‘learning rights’ of the individual in group work. The aim of the paper is theoretically to offer a vocabulary concerning ‘learning rights’ of the individual in group work by applying John Dewey’s metaphor ‘the spectator versus...

  10. Are groups working in the Information Technology class? | Mentz ...

    African Journals Online (AJOL)

    We discuss teache rs' perce ption of the use of group work in the Information Technology (IT) classroom. We describe the current situation regarding the implementation of group work in IT classrooms in South Africa as well as the challenges that IT teachers face when implementing group work. This information will be used ...

  11. Qualitative Research in Group Work: Status, Synergies, and Implementation

    Science.gov (United States)

    Rubel, Deborah; Okech, Jane E. Atieno

    2017-01-01

    The article aims to advance the use of qualitative research methods to understand group work. The first part of this article situates the use of qualitative research methods in relationship to group work research. The second part examines recent qualitative group work research using a framework informed by scoping and systematic review methods and…

  12. Technical Meeting on Fast Reactors and Related Fuel Cycle Facilities with Improved Economic Characteristics. Working Material

    International Nuclear Information System (INIS)

    2013-01-01

    In recent years, engineering oriented work, rather than basic research and development (R&D), has led to significant progress in improving the economics of innovative fast reactors and associated fuel cycle facilities, while maintaining and even enhancing the safety features of these systems. Optimization of plant size and layout, more compact designs, reduction of the amount of plant materials and the building volumes, higher operating temperatures to attain higher generating efficiencies, improvement of load factor, extended core lifetimes, high fuel burnup, etc. are good examples of achievements to date that have improved the economics of fast neutron systems. The IAEA, through its Technical Working Group on Fast Reactors (TWG-FR) and Technical Working Group on Nuclear Fuel Cycle Options and Spent Fuel Management (TWG-NFCO), devotes many of its initiatives to encouraging technical cooperation and promoting common research and technology development projects among Member States with fast reactor and advanced fuel cycle development programmes, with the general aim of catalysing and accelerating technology advances in these fields. In particular the theme of fast reactor deployment, scenarios and economics has been largely debated during the recent IAEA International Conference on Fast Reactors and Related Fuel Cycles: Safe Technologies and Sustainable Scenarios, held in Paris in March 2013. Several papers presented at this conference discussed the economics of fast reactors from different national and regional perspectives, including business cases, investment scenarios, funding mechanisms and design options that offer significant capital and energy production cost reductions. This Technical Meeting on Fast Reactors and Related Fuel Cycle Facilities with Improved Economic Characteristics addresses Member States’ expressed need for information exchange in the field, with the aim of identifying the main open issues and launching possible initiatives to help and

  13. 48 CFR 2452.237-73 - Conduct of Work and Technical Guidance.

    Science.gov (United States)

    2010-10-01

    ... conditions of the contract. (c) The GTR will issue technical guidance in writing or, if issued orally, he/she... Technical Guidance. 2452.237-73 Section 2452.237-73 Federal Acquisition Regulations System DEPARTMENT OF... Provisions and Clauses 2452.237-73 Conduct of Work and Technical Guidance. As prescribed in 2437.110(d...

  14. Savannah River Plant, Works Technical Department monthly progress report for March 1956

    International Nuclear Information System (INIS)

    1956-01-01

    This document details activities of the Works Technical Department during the month of March 1956. It covers reactor technology, separations technology, engineering assistance and heavy water technology

  15. National logistics working groups: A landscape analysis study.

    Science.gov (United States)

    Leab, Dorothy; Schreiber, Benjamin; Kasonde, Musonda; Bessat, Olivia; Bui, Son; Loisel, Carine

    2017-04-19

    Several countries have acknowledged the contributions made by national logistics working groups (NLWG) to ensure equitable access to the expanded program on immunization's (EPI) vaccines against preventable diseases. In order to provide key insights to the United Nations Children's Fund (UNICEF) and the World Health Organization (WHO) supply chain hub - as well as other players, including national EPI - a landscape analysis study was conducted from September 2015 to February 2016. This is a cross-sectional survey taken by 43 countries that combines qualitative and quantitative approaches. Data was collected through a desk review, consultation, interviews, and distance questioning. References and guidance were used to determine and specify the underlying mechanisms of NLWGs. The key findings are:This study has provided a general overview of the status of NLWGs for immunization in various countries. Based on the key insights of the study, technical assistance needs have been identified, and immunization partners will be required to help countries create and reinforce their NLWGs. Copyright © 2017. Published by Elsevier Ltd.

  16. Technical Meeting on Passive Shutdown Systems for Liquid Metal-Cooled Fast Reactors. Working Material

    International Nuclear Information System (INIS)

    2015-01-01

    A major focus of the design of modern fast reactor systems is on inherent and passive safety. Specific systems to improve reactor safety performance during accidental transients have been developed in nearly all fast reactor programs, and a large number of proposed systems have reached various stages of maturity. This Technical Meeting on Passive Shutdown Systems for Fast Reactors, which was recommended by the Technical Working Group on Fast Reactors (TWG-FR), addressed Member States’ expressed need for information exchange on projects and programs in the field, as well as for the identification of priorities based on the analysis of technology gaps to be covered through R&D activities. This meeting was limited to shutdown systems only, and did not include other passive features such as natural circulation decay heat removal systems etc.; however the meeting catered to passive shutdown safety devices applicable to all types of fast neutron systems. It was agreed to initiate a new study and produce a Nuclear Energy Series (NES) Technical Report to collect information about the existing operational systems as well as innovative concepts under development. This will be a useful source for member states interested in gaining technical expertise to develop passive shutdown systems as well as to highlight the importance and development in this area

  17. 78 FR 46361 - Trinity Adaptive Management Working Group; Public Meeting, Teleconference and Web-Based Meeting

    Science.gov (United States)

    2013-07-31

    ... stakeholders the opportunity to give policy, management, and technical input concerning Trinity River...-FF08EACT00] Trinity Adaptive Management Working Group; Public Meeting, Teleconference and Web-Based Meeting... Trinity Management Council (TMC). DATES: Public meeting, Teleconference, and web-based meeting: TAMWG and...

  18. 78 FR 17226 - Trinity Adaptive Management Working Group; Public Meeting, Teleconference and Web-Based Meeting

    Science.gov (United States)

    2013-03-20

    ... stakeholders the opportunity to give policy, management, and technical input concerning Trinity River...-FF08EACT00] Trinity Adaptive Management Working Group; Public Meeting, Teleconference and Web-Based Meeting... Service, announce a public meeting, teleconference and web-based meeting of the Trinity Adaptive...

  19. 78 FR 49281 - Trinity Adaptive Management Working Group; Public Meeting, Teleconference and Web-Based Meeting

    Science.gov (United States)

    2013-08-13

    ... opportunity to give policy, management, and technical input concerning Trinity River (California) restoration...-FF08EACT00] Trinity Adaptive Management Working Group; Public Meeting, Teleconference and Web-Based Meeting... Service, announce a public meeting, teleconference, and web-based meeting of the Trinity Adaptive...

  20. Report of the LOFT special review group. Technical report

    International Nuclear Information System (INIS)

    Ross, D.F. Jr.

    1981-02-01

    This report represents the results of the LOFT Special Review Group (LSRG) evaluation of the LOFT program and is submitted to the Commission as an aid in its decision whether to continue NRC support of the LOFT project beyond FY 1982. The principal consensus reached by the LSRG recommends continued NRC support of the LOFT program through FY 1983

  1. 77 FR 45370 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-07-31

    ...-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders... take place at the North Fork Grange Hall, Dutch Creek Road, Junction City, CA 96048. The group will...

  2. Final report of the tritium issues working group. Vol. 2

    International Nuclear Information System (INIS)

    Spratt, Peter; Hardy, David; Peirce, Denny; Smith, Ron; Wyatt, Alan.

    1985-09-01

    This report consists of a series of appendices relating to the sociological and technical considerations of tritium and its related technology. It is intended as a supplement to Volume 1 of the Final Report of the Tritium Issues Working Group. The work will the cover the following specific areas: A) Development of an ethical framework related to technology, morality, weapons, politics, etc. B) Review the history of nuclear power in Canada, placement of this technology in context with other technologies, waste products and the CANDU reactor system. C) Assessment of tritium as a unique product, as a class of isotopes, waste by-product and physical properties, effects on human life and its place in the natural environment. D) Assessment of tritium and the environment, diffusion through commerical application, European and American experience, waste management and recycling. E) Assessment of commercial applications, including current experience, historical applications for commercial purposes, offshore revenue for Canada value-added component and role of Ontario Hydro. F) Assessment of tritium and weapons, including technology and the military, past and future role of tritium in weapons, proliferation theories, generic conclusions regarding linkages, dependence of Americans on foreign sources of strategic resources. G) Review of regulations in effect now with respect to nuclear and/or other products with potential to military application, and what is needed. H) Review of traditional Canadian postures in the area of technology perception and political culture, the role, mandate and responsibility of Ontario Hydro, growth of international economy, Canada's competitive position in this economy and the challenges and dilemmas that modern decision makers have in a highly interrelated technological world

  3. Biking to work in Miami. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, O.

    1982-08-01

    The objective of the project was to produce and distribute a guide to commuting by bicycle in the Miami metropolitan area. The area is uniquely suited to bicycling because of its pleasant year-round climate and relatively flat topography. Persuading even a small percentage of automobile commuters to try biking to work could result in substantial energy savings in Miami as in most other major metropolitan areas. Seven of the largest employment centers in the area were selected as major commuter destinations suitable for bicycle commuters. Safe and scenic ways of commuting to these areas by bicycle were mapped and described in a series of short narratives. Additional material on safe riding techniques and the choice of equipment was developed. The resulting 40 page booklet, Biking to Work in Miami, was printed and distributed by the author to local cycling groups, bicycle interests, and others. Copies were also sent to interested parties outside the Miami area. The initial reception has been very encouraging and a number of favorable reply cards have been received with useful comments and suggestions. A revised version aimed at stimulating bikers to avail of the soon-to-be-opened rapid transit system is being considered. A writer for the Miami Herald is interested in using parts of the Guide for a series in the newspaper.

  4. Summary of the TeV33 working group

    International Nuclear Information System (INIS)

    Bagley, P.P.; Bieniosek, F.M.; Colestock, P.

    1996-10-01

    This summary of the TeV33 working group at Snowmass reports on work in the areas of Tevatron store parameters, the beam-beam interaction, Main Injector intensity (slip stacking), antiproton production, and electron cooling

  5. Summary, Working Group 1: Electron guns and injector designs

    International Nuclear Information System (INIS)

    Ben-Zvi, I.; Bazarov, I.V.

    2006-01-01

    We summarize the proceedings of Working Group 1 of the 2005 Energy Recovery Linac (ERL) Workshop. The subject of this working group, the electron gun and injector design, is arguably the most critical part of the ERL as it determines the ultimate performance of this type of accelerators. Working Group 1 dealt with a variety of subjects: The technology of DC, normal-conducting RF and superconducting RF guns; beam dynamics in the gun and injector; the cathode and laser package; modeling and computational issues; magnetized beams and polarization. A short overview of these issues covered in the Working Group is presented in this paper

  6. Has Group Work Education Lost Its Social Group Work Essence? A Content Analysis of MSW Course Syllabi in Search of Mutual Aid and Group Conflict Content

    Science.gov (United States)

    Sweifach, Jay Stephen

    2015-01-01

    This article presents the results of a content analysis of MSW group work course syllabi in an effort to better understand the extent to which mutual aid and group conflict, two important dimensions of social group work, are included and featured as prominent elements in MSW-level group work instruction.

  7. A working group for Japanese nuclear data measurement network

    International Nuclear Information System (INIS)

    Watanabe, Yukinobu

    2013-01-01

    A new working group in the Japanese Nuclear Data Committee has been established to make a cooperative network among researchers involved in nuclear data measurements and to discuss the strategy for nuclear data measurements. The working group activities are reported. (author)

  8. 77 FR 20789 - Work Group on Measuring Systems for Taxis

    Science.gov (United States)

    2012-04-06

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Work Group on Measuring.... SUMMARY: The National Institute of Standards and Technology (NIST) is forming a Work Group (WG) to develop... states in laws, regulations, methods, and testing equipment that comprises the regulatory control of...

  9. Commission 41 Working Group on Astronomy and World Heritage

    Science.gov (United States)

    Ruggles, Clive; Wolfschmidt, Gudrun; Badolati, Ennio; Batten, Alan; Belmonte, Juan; Bhathal, Ragbir; Brosche, Peter; Dbarbat, Suzanne; DeVorkin, David; Duerbeck, Hilmar W.; Epifania, Priscilla; Ferlet, Roger; Funes, Jos; Glass, Ian S.; Griffin, Elizabeth; Gurshtein, Alexander; Hearnshaw, John; Helou, George; Hidayat, Bambang; Hockey, Thomas; Holbrook, Jarita; Incerti, Manuela; Kepler, S. O.; Kochhar, Rajesh; Krupp, Edwin C.; Locher, Kurt; Maglova-Stoeva, Penka; Mickaelian, Areg; Pettersen, Bjorn R.; Pineda de Caras, Mara Cristina; Pinigin, Gennadiy; Pompeia, Luciana; Pozhalova, Zhanna; Yun-li, Shi; Simonia, Irakli; Le Guet Tully, Francoise; Wainscoat, Richard

    2010-05-01

    What follows is a short report on the Business Meeting of the Astronomy and World Heritage Working Group held on Thursday August 6, 2009. This was the first formal Business Meeting of the Working Group since its formation following the signing of the Memorandum of Understanding between the IAU and UNESCO on Astronomy and World Heritage in October 2008.

  10. 75 FR 17158 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-04-05

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N065; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  11. 75 FR 51284 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-08-19

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N168; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  12. 77 FR 10766 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-02-23

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2012-N039; FXFR1334088TWG0W4-123-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders...

  13. 75 FR 70947 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-11-19

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N253; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  14. 76 FR 52345 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-08-22

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N168; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  15. 76 FR 70751 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-11-15

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N237; FXFR1334088TWG0W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  16. 75 FR 27814 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-05-18

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N101; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  17. 76 FR 14044 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-03-15

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N044; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  18. 77 FR 74203 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-12-13

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2012-N266; FXFR1334088TWG0W4-123-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders...

  19. 76 FR 34248 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-06-13

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N116; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  20. 76 FR 23621 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2011-04-27

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2011-N083; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  1. 77 FR 30314 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-05-22

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2012-N124: FXFR1334088TWG0W4-123-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders...

  2. 77 FR 50155 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2012-08-20

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2012-N201;FXFR1334088TWG0W4-123-FF08EACT00] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders...

  3. 75 FR 10501 - Trinity Adaptive Management Working Group

    Science.gov (United States)

    2010-03-08

    ... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R8-FHC-2010-N041; 81331-1334-8TWG-W4] Trinity Adaptive Management Working Group AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: The Trinity Adaptive Management Working Group (TAMWG) affords stakeholders the...

  4. 75 FR 21602 - Online Safety and Technology Working Group Meeting

    Science.gov (United States)

    2010-04-26

    ... OSTWG is tasked with evaluating industry efforts to promote a safe online environment for children. The... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

  5. 75 FR 1338 - Online Safety and Technology Working Group Meeting

    Science.gov (United States)

    2010-01-11

    ... promote a safe online environment for children. The Act requires the OSTWG to report its findings and... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

  6. Report of the Working Group on Publicity and Funding

    DEFF Research Database (Denmark)

    Gammeltoft, Peder

    2014-01-01

    The report highlights the activities of the working group in raising awareness of the need for geographical names standardization and the work of the Group of Experts, particularly in advancing the digital presence of UNGEGN, through web presence and updated Media Kit and Wikipedia presence...

  7. Division X, XII / Commission 40, 41 / Working Group Radio Astronomy

    NARCIS (Netherlands)

    Kellermann, Kenneth; Orchiston, Wayne; Davies, Rod; Gurvits, Leonid; Ishiguro, Masato; Lequeux, James; Swarup, Govind; Wall, Jasper; Wielebinski, Richard; van Woerden, Hugo

    The IAU Working Group on Historical Radio Astronomy (WGHRA) was formed at the 2003 General Assembly of the IAU as a Joint Working Group of Commissions 40 (Radio Astronomy) and 41 (History of Astronomy), in order to: a) assemble a master list of surviving historically-significant radio telescopes and

  8. Effects of Personality on Attitudes toward Academic Group Work

    Science.gov (United States)

    Forrester, William R.; Tashchian, Armen

    2010-01-01

    This study investigated the effects of personality on attitudes toward academic group work among a sample of 225 business students. Data were collected using pre-existing scales for measuring personality and attitudes toward academic group work. Specifically, the Neo-FFI scale was used to measure the five personality dimensions of openness,…

  9. Summary records of the meetings of INFCE Working Group 6

    International Nuclear Information System (INIS)

    These were 6 meetings of Working Group 6 that took place between 8 December 1977 and 7 September 1979. This document consists of the summaries of those meetings and it reports on the objectives of the Working Group, the participants, the guidelines for the study, and the outline of the final report

  10. Group Work in Schools: A Process Consultation Approach

    Science.gov (United States)

    Farouk, Shaalan

    2004-01-01

    This paper provides a description of how an educational psychologist can consult with groups of teachers mostly in relation to their work with pupils who display emotional behavioural difficulties. The paper includes a review of the work on group consultation in schools, followed by a description of process consultation (Schein, 1988 ) and how the…

  11. Ethical Issues in the Research of Group Work

    Science.gov (United States)

    Goodrich, Kristopher M.; Luke, Melissa

    2017-01-01

    This article provides a primer for researchers exploring ethical issues in the research of group work. The article begins with an exploration of relevant ethical issues through the research process and current standards guiding its practice. Next, the authors identify resources that group work researchers can consult prior to constructing their…

  12. Group Work, Interlanguage Talk,and Second Language Acquisition.

    Science.gov (United States)

    Long, Michael H.; Porter, Patricia A.

    1985-01-01

    Discusses both the pedagogical arguments and the psycholinguistic rationale for small-group work in the second language classroom. Claims that the negotiation work possible in group actiity makes it an attractive alternative to the teacher-led discussion. Reviews research findings on interlanguage which generally support the claims made for group…

  13. IAEA Technical Meeting on Innovative Heat Exchanger and Steam Generator Designs for Fast Reactors. Working Material

    International Nuclear Information System (INIS)

    2011-01-01

    The IAEA, within the framework of its Nuclear Energy Department’s Technical Working Group on Fast Reactors (TWG-FR), assists Member States activities in fast reactors technology development areas by providing an umbrella for information exchange [topical Technical Meetings (TMs), Workshops and large Conferences] and collaborative R&D [Coordinated Research Projects (CRPs)]. The Technical meeting on “Innovative Heat Exchanger and Steam Generator Designs for Fast Reactors” was held from 21 – 22 December 2011 in Vienna, addressing Member States’ expressed needs of information exchange in the field of advanced fast reactor design features, with particular attention to innovative heat exchangers and steam generators. The Objective of the TM is to provide a global forum for in-depth information exchange and discussion on the most advanced concepts of heat exchangers and steam generators for fast reactors. More specifically, the objectives are: · Review of the status of advanced fast reactor development activities with special emphasis on design and performance of heat exchangers and steam generators; · Discuss requirements for innovative heat exchangers and steam generators; · Present results of studies and conceptual designs for innovative heat exchangers and steam generators; · Provide recommendations for international collaboration under the IAEA aegis. The meeting agenda of the meeting is in Annex I

  14. Group work and undergraduate accounting students: a Bourdieusian analysis

    OpenAIRE

    Teviotdale, Wilma; Clancy, David; Fisher, Roy; Hill, Pat

    2017-01-01

    This study investigated students’ views and experiences of group work in a vocationally oriented undergraduate Accounting and Finance degree course in an English post-1992 university. In this context tutors prepare students for the profession and for the workplace, and the development of team-working skills is a core element in the curriculum. This presents a significant challenge to tutors given that students commonly report an aversion to aspects of group work, including a perceived loss of...

  15. Investigating the Effectiveness of Group Work in Mathematics

    Directory of Open Access Journals (Sweden)

    Anastasia Sofroniou

    2016-09-01

    Full Text Available Group work permits students to develop a range of critical thinking, analytical and communication skills; effective team work; appreciation and respect for other views, techniques and problem-solving methods, all of which promote active learning and enhance student learning. This paper presents an evaluation of employing the didactic and pedagogical customs of group work in mathematics with the aim of improving student performance as well as exploring students’ perceptions of working in groups. The evaluation of group work was carried out during tutorial time with first year civil engineering students undertaking a mathematics module in their second semester. The aim was to investigate whether group work learning can help students gain a deeper understanding of the module content, develop improved critical and analytical thinking skills and see if this method of pedagogy can produce higher performance levels. The group work sessions were conducted over four weeks whilst studying the topic of integration. Evaluation surveys were collected at the end of the intervention along with an investigation into the examination results from the end of semester examinations. In order to derive plausible and reasonable conclusions, these examination results were compared with an analogous cohort of first year mathematics students, also studying integration in their engineering-based degree. The investigation into the effectiveness of group work showed interesting and encouraging positive outcomes, supported by a combination of qualitative and quantitative analysis.

  16. Group Work and Leadership: Perception of FCS Students

    Science.gov (United States)

    Arendt, Susan W.; Gregoire, Mary B.

    2006-01-01

    No known studies have examined the perception of family and consumer science (FCS) students related to group work in the classroom and its relationship to leadership. In this qualitative study, two groups of FCS students--hospitality management and dietetics--viewed group projects as exercises in leadership skills that had many barriers.…

  17. Letting the Drama into Group Work: Using Conflict Constructively in Performing Arts Group Practice

    Science.gov (United States)

    Crossley, Tracy

    2006-01-01

    The article examines conflict avoidance in performing arts group work and issues arising in relation to teaching and learning. In group theory, conflict is addressed largely in terms of its detrimental effects on group work, and its constructive potential is often marginalized. Similarly, undergraduate students usually interpret "effective…

  18. Causal Relationships between Communication Confidence, Beliefs about Group Work, and Willingness to Communicate in Foreign Language Group Work

    Science.gov (United States)

    Fushino, Kumiko

    2010-01-01

    This article reports on the causal relationships between three factors in second language (L2) group work settings: communication confidence (i.e., confidence in one's ability to communicate), beliefs about group work, and willingness to communicate (WTC). A questionnaire was administered to 729 first-year university students in Japan. A model…

  19. Statements of work handbook. [technical writing for NASA programs

    Science.gov (United States)

    1975-01-01

    Guidelines are presented for preparing statements of work (SOW) to assure a consistent approach throughout NASA. Statements of work for study and preliminary definition contracts, for definition and development of major systems, for support services, and for small research and development contracts are discussed.

  20. AREVA Technical Days (ATD) session 1: Energy outlook and presentation of the Areva Group; AREVA Technical Days (ATD) session 1: enjeux energetiques et presentation du groupe AREVA

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This first session deals with energy challenges and nuclear, public acceptance of nuclear power, mining activities, chemistry activities, enrichment activities, fuel assembly, reactors and services activities, nuclear measurements activities, reprocessing and recycling activities, logistics activities and connectors activities. (A.L.B.)

  1. Discussions of the uranium geology working groups IGC, Sydney

    International Nuclear Information System (INIS)

    1978-01-01

    The report is divided into six working group discussions on the following subjects: 1) Chemical and physical mechanisms in the formation of uranium mineralization, geochronology, isotope geology and mineralogy; 2) Sedimentary basins and sandstone-type uranium deposits; 3) Uranium in quartz-pebble conglomerates; 4) Vein and similar type deposits (pitchblende); 5) Other uranium deposits; 6) Relation of metallogenic, tectonic and zoning factors to the origin of uranium deposits. Each working group paper contains a short introductory part followed by a discussion by the working group members

  2. The work of the 'Irradiation Damage' sub-group of the EURATOM Working Group on Research Reactor Dosimetry

    International Nuclear Information System (INIS)

    Genthon, J.P.

    1975-01-01

    The EURATOM Working Group on Reactor Dosimetry is investigating the problems of the dosimetry of radiation damage experiments. Papers have been published on the dosimetry of graphite and irradiation of metals: the model chosen, the quantities employed to express the fluences, numerical values, measurements, and measurement techniques. The ensuing work of the EURATOM Working Group of Reactor Dosimetry in these areas will deal with the measurement methods required for the dosimetry of radiation damage. (Auth.)

  3. The Power and Promise of Group Work: Consumer Evaluation of Group Work Services in Gauteng, South Africa

    Science.gov (United States)

    Rasool, Shahana; Ross, Eleanor

    2017-01-01

    Purpose: In light of the limited research into consumers' experiences of group work services in South Africa, the study evaluated groups offered by a range of social service agencies in Gauteng to determine whether group interventions were perceived by users as developmental and empowering. Methods: Program evaluation was employed to evaluate 47…

  4. The 3rd Asia–Pacific Transport Working Group (APTWG) Meeting

    International Nuclear Information System (INIS)

    Jhang, Hogun; Diamond, P.H.; Leconte, M.; Kwon, J.M.; Ida, K.; Tamura, N.; Kosuga, Y.

    2014-01-01

    This conference report summarizes the contributions to and discussions at the 3rd Asia–Pacific Transport Working Group (APTWG) meeting held in Jeju-island, Korea, on 21–24 May 2013. The main objective of the meeting is to develop a predictive understanding of transport mechanisms in magnetically confined fusion plasmas. In an effort to accomplish this objective, four technical working groups were organized under the headings: (1) transport barrier formation and confinement enhancement, (2) 3D effects and Magnetohydrodynamic–turbulence interaction, (3) momentum transport and non-locality and (4) particle/impurity transport and energetic particles. (conference report)

  5. Working group report: Flavor physics and model building

    Indian Academy of Sciences (India)

    cO Indian Academy of Sciences. Vol. ... This is the report of flavor physics and model building working group at ... those in model building have been primarily devoted to neutrino physics. ..... [12] Andrei Gritsan, ICHEP 2004, Beijing, China.

  6. Linear Collider Working Group reports from Snowmass '88

    International Nuclear Information System (INIS)

    Ruth, R.D.

    1989-03-01

    This report contains a summary of the Linear Collider Working Group. Papers on the following topics are discussed: parameters; damping ring; bunch compressor; linac; final focus; and multibunch effects

  7. Report from the Panama Canal Stakeholder Working Group.

    Science.gov (United States)

    2013-03-01

    This project assists the Texas Department of Transportation (TxDOT) in assessing the potential impacts of the Panama Canal expansion on Texas ports and the landside transportation system. TxDOT formed a Panama Canal Stakeholder Working Group (PCSWG) ...

  8. Environmental Working Group Arctic Meteorology and Climate Atlas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Environmental Working Group (EWG) was established in June 1995 under the framework of the U.S.-Russian Joint Commission on Economic and Technological...

  9. Final Report of the Advanced Coal Technology Work Group

    Science.gov (United States)

    The Advanced Coal Technology workgroup reported to the Clean Air Act Advisory Committee. This page includes the final report of the Advanced Coal Technology Work Group to the Clean Air Act Advisory Committee.

  10. Summary of the BDS and MDI CLIC08 Working Group

    CERN Document Server

    Tomás, R; Ahmed, I; Ambatu, PK; Angal-Kalinin, D; Barlow, R; Baud, J P; Bolzon, B; Braun, H; Burkhardt, H; Burt, GC; Corsini, R; Dalena, B; Dexter, AC; Dolgashev, V; Elsener, K; Fernandez Hernando, JL; Gaillard, G; Geffroy, N; Jackson, F; Jeremie, A; Jones, RM; McIntosh, P; Moffeit, K; Peltier, F; Resta-López, J; Rumolo, G; Schulte, D; Seryi, A; Toader, A; Zimmermann, F

    2008-01-01

    This note summarizes the presentations held within the Beam Delivery System and Machine Detector Interface working group of the CLIC08 workshop. The written contributions have been provided by the presenters on a voluntary basis.

  11. Remarks of the SFRP working group about ICRP recommendations

    International Nuclear Information System (INIS)

    Schieber, C.; Cordoliani, Y.S.

    2005-01-01

    Remarks of the SFRP working group about ICRP recommendations. The International Commission on Radiological Protection has proposed last summer on its Web site the draft text of the 2005 ICRP recommendations for consultation. As it was done for the previous drafts, the French Society for Radiation Protection, has sent his comments to the ICRP, through a specific working group. The text sent to the ICRP is presented here to the readers of the SFRP's Journal. (author)

  12. Report of the Working Group on Publicity and Funding

    DEFF Research Database (Denmark)

    Gammeltoft, Peder

    2017-01-01

    The report presents the aims and activities of the working group and in its efforts with raising awareness of the need for geographical names standardization and the work of the Group of Experts, through presence on the web and social media and Media Kit. The report also highlights efforts to find...... financial support for training and for representatives from developing countries attending UNSCGN Conferences and UNGEGN Sessions....

  13. WORK GROUP DEVELOPMENT MODELS – THE EVOLUTION FROM SIMPLE GROUP TO EFFECTIVE TEAM

    Directory of Open Access Journals (Sweden)

    Raluca ZOLTAN

    2016-02-01

    Full Text Available Currently, work teams are increasingly studied by virtue of the advantages they have compared to the work groups. But a true team does not appear overnight but must complete several steps to overcome the initial stage of its existence as a group. The question that arises is at what point a simple group is turning into an effective team. Even though the development process of group into a team is not a linear process, the models found in the literature provides a rich framework for analyzing and identifying the features which group acquires over time till it become a team in the true sense of word. Thus, in this article we propose an analysis of the main models of group development in order to point out, even in a relative manner, the stage when the simple work group becomes an effective work team.

  14. Annual report to the Working Group on Technology, Growth, and Employment

    International Nuclear Information System (INIS)

    1985-04-01

    A meeting of the Working Group on High Energy Physics was convened in Brussels, Belgium, in July 1984, and impaneled new groups of technical experts to report on long-term planning, technical collaborations, and the identification of administrative obstacles experienced within the Summit countries that impede international collaboration. The charges to these three new groups are contained in this report under the section on the Brussels meeting. The reports prepared by the technical experts were then reviewed at the January 1985 meeting at Cadarache, France, and the results are contained in this report under the section on the Cadarache meeting. The Summit Working Group on High Energy Physics believes progress is being made toward cooperation among the Summit countries in the exploration of scientific and technological development upon which the Summit Heads of State and Government declared at Versailles revitalization and growth of the world economy will depend - to a large extent. At Cadarache, the Group found that, since its establishment, international collaboration has increased in the use of present accelerators and in the planning for future accelerators. The Group also found that there are specific areas of technology in which near-term research cooperation is possible. Finally, the Group identified administrative regulations that hamper effective international collaboration in science and technology and that could be revised or eliminated through coordinated, high level Summit action. The major accomplishment of the Working Group thus far has been the creation of a forum for discussions on collaboration in a major field of science by seven industrialized countries. The Group recommends the continuation of its review of long-term plans for major facilities on an intergovernmental basis

  15. Innovation and the organisation of technical expertise and work

    DEFF Research Database (Denmark)

    Howells, John

    This paper reviews a selection of the comparative research on the organisation of skills and work in different countries. It argues that despite differences in institutional means, such as keiretsu and structured apprenticeship, the ends, in terms of a capacity to organise skills, is similar. It ...... of what makes an effective technology manager. The conclusion is that in the most effective cases, whatever the institutional means that allows training, the object is the integration of formal academic knowledge with a structured and broad base of work experience...

  16. Investigating the Effectiveness of Group Work in Mathematics

    Science.gov (United States)

    Sofroniou, Anastasia; Poutos, Konstantinos

    2016-01-01

    Group work permits students to develop a range of critical thinking, analytical and communication skills; effective team work; appreciation and respect for other views, techniques and problem-solving methods, all of which promote active learning and enhance student learning. This paper presents an evaluation of employing the didactic and…

  17. Applying an Activity System to Online Collaborative Group Work Analysis

    Science.gov (United States)

    Choi, Hyungshin; Kang, Myunghee

    2010-01-01

    This study determines whether an activity system provides a systematic framework to analyse collaborative group work. Using an activity system as a unit of analysis, the research examined learner behaviours, conflicting factors and facilitating factors while students engaged in collaborative work via asynchronous computer-mediated communication.…

  18. TMAP ad hoc Working Group Fish Progress report 2007

    NARCIS (Netherlands)

    Bolle, L.J.; Damm, U.; Diederichs, B.; Jager, Z.; Overzee, van H.M.J.

    2007-01-01

    Building on previous work done by the TMAP ad hoc Working Group Fish, a meeting and a workshop were held in Hamburg in June and October 2007. The most important aim of both was to come to an agreement on how to proceed with the data preparations and analyses, and to facilitate the exchange of data

  19. Involvement of stakeholders in the work of Technical Support Organisation: a strategy to learn together a new way of working

    International Nuclear Information System (INIS)

    Rollinger, Francois; Petitfrere, Michael

    2008-01-01

    Full text: Society's concerns have led to changes in the legal framework towards a greater requirement for public information and participation in decision-making processes. International organisations such as the OECD/NEA and the IAEA have also made similar changes. Moving towards expertise sharing is a development that demands a real change of culture on the part of all players, putting technical issues as part of a broader process of evaluation and decision-making. Which evolutions are necessary to the way Technical Support Organisations work to introduce a fourth player the population representatives in controlling radiological and nuclear risk? Developing experimental expert assessment processes involving parts of civil society that both sides can learn from one another is the core of IRSN's strategy for opening its expertise to civil society. In this perspective a dedicated team is responsible for carrying out actions in consultation with stakeholders from civil society. Two pluralistic assessment groups have been set up on radiological protection issues, and their innovative method of operation is worth highlighting. Another participative action is the development jointly with the Local Committees in the Loire Valley of methods of collecting environmental monitoring data. An internal network dedicated to stakeholder involvement has also been set up to accompany and promote this new approach internally. IRSN is currently elaborating a charter which will make public its commitments to the society related to stakeholder's involvement. Finally IRSN also intends to take advantage of existing experiences elsewhere and has been working for three years with four other assessments agencies in France in the frame of health and environmental risks about this new challenge: involving civil society in the assessments preceding the decision-making. (author)

  20. Physical Workload and Work Capacity across Occupational Groups.

    Directory of Open Access Journals (Sweden)

    Stefanie Brighenti-Zogg

    Full Text Available This study aimed to determine physical performance criteria of different occupational groups by investigating physical activity and energy expenditure in healthy Swiss employees in real-life workplaces on workdays and non-working days in relation to their aerobic capacity (VO2max. In this cross-sectional study, 337 healthy and full-time employed adults were recruited. Participants were classified (nine categories according to the International Standard Classification of Occupations 1988 and merged into three groups with low-, moderate- and high-intensity occupational activity. Daily steps, energy expenditure, metabolic equivalents and activity at different intensities were measured using the SenseWear Mini armband on seven consecutive days (23 hours/day. VO2max was determined by the 20-meter shuttle run test. Data of 303 subjects were considered for analysis (63% male, mean age: 33 yrs, SD 12, 101 from the low-, 102 from the moderate- and 100 from the high-intensity group. At work, the high-intensity group showed higher energy expenditure, metabolic equivalents, steps and activity at all intensities than the other groups (p<0.001. There were no significant differences in physical activity between the occupational groups on non-working days. VO2max did not differ across groups when stratified for gender. The upper workload limit was 21%, 29% and 44% of VO2max in the low-, moderate- and high-intensity group, respectively. Men had a lower limit than women due to their higher VO2max (26% vs. 37%, when all groups were combined. While this study did confirm that the average workload limit is one third of VO2max, it showed that the average is misrepresenting the actual physical work demands of specific occupational groups, and that it does not account for gender-related differences in relative workload. Therefore, clinical practice needs to consider these differences with regard to a safe return to work, particularly for the high-intensity group.

  1. Physical Workload and Work Capacity across Occupational Groups

    Science.gov (United States)

    Brighenti-Zogg, Stefanie; Mundwiler, Jonas; Schüpbach, Ulla; Dieterle, Thomas; Wolfer, David Paul; Leuppi, Jörg Daniel; Miedinger, David

    2016-01-01

    This study aimed to determine physical performance criteria of different occupational groups by investigating physical activity and energy expenditure in healthy Swiss employees in real-life workplaces on workdays and non-working days in relation to their aerobic capacity (VO2max). In this cross-sectional study, 337 healthy and full-time employed adults were recruited. Participants were classified (nine categories) according to the International Standard Classification of Occupations 1988 and merged into three groups with low-, moderate- and high-intensity occupational activity. Daily steps, energy expenditure, metabolic equivalents and activity at different intensities were measured using the SenseWear Mini armband on seven consecutive days (23 hours/day). VO2max was determined by the 20-meter shuttle run test. Data of 303 subjects were considered for analysis (63% male, mean age: 33 yrs, SD 12), 101 from the low-, 102 from the moderate- and 100 from the high-intensity group. At work, the high-intensity group showed higher energy expenditure, metabolic equivalents, steps and activity at all intensities than the other groups (pphysical activity between the occupational groups on non-working days. VO2max did not differ across groups when stratified for gender. The upper workload limit was 21%, 29% and 44% of VO2max in the low-, moderate- and high-intensity group, respectively. Men had a lower limit than women due to their higher VO2max (26% vs. 37%), when all groups were combined. While this study did confirm that the average workload limit is one third of VO2max, it showed that the average is misrepresenting the actual physical work demands of specific occupational groups, and that it does not account for gender-related differences in relative workload. Therefore, clinical practice needs to consider these differences with regard to a safe return to work, particularly for the high-intensity group. PMID:27136206

  2. "Good Work Awards:" Effects on Children's Families. Technical Report #12.

    Science.gov (United States)

    Chun, Sherlyn; Mays, Violet

    This brief report describes parental reaction to a reinforcement strategy used with children in the Kamehameha Early Education Program (KEEP). Staff members report that "Good Work Awards" (GWAs) are viewed favorably by mothers of students. GWAs are dittoed notes sent home with children when they have met a minimum criterion for daily…

  3. Cultural diversity and work-group performance : Detecting the rules

    NARCIS (Netherlands)

    Girndt, T.

    2000-01-01

    With greater levels of international cooperation, work-groups are increasingly composed of members from different cultures. These groups often suffer from communication problems; however, research suggests that they also benefit from their members cultural diversity and generate higher ranges of

  4. Facilitating Support Groups for Professionals Working with People with AIDS.

    Science.gov (United States)

    Grossman, Arnold H.; Silverstein, Charles

    1993-01-01

    Describes support groups for health care professionals who work with people with human immunodeficiency virus (HIV) or Acquired Immune Deficiency Syndrome (AIDS) and who are experiencing burnout from excessive demands on their energy, strength, and resources. Discusses group administration, effective intervention techniques, and issues of health…

  5. Understanding the Process by Which New Employees Enter Work Groups

    Science.gov (United States)

    Summers, Donald B.

    1977-01-01

    The Group Integration Process, described in this article, serves as a broad and guiding set of steps (invitation, induction, orientation, training, relationship, and integration) that helps the supervisor better understand what is to be done in managing a new employee's entrance into a work group. (TA)

  6. Group dream work as a support for self – awareness

    OpenAIRE

    Brumen Žarn, Zarja

    2016-01-01

    Master's thesis discusses group dream work as a form of support for increasing the individual's self-awareness. Working with dreams encourages creativity, opens up the possibilities of self-knowing and helps individuals to guide their life paths. One of the fundamental concepts of social pedagogy is the empowerment of individuals for problem solving and self-development. For this purpose, social educational profession develops and uses a number of methods and approaches. Working with dreams i...

  7. Tenth working group meeting of representatives of RCA Member States. Report

    International Nuclear Information System (INIS)

    1989-04-01

    The Tenth RCA (Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology) Working Group meeting of representatives of RCA Member States was held at the Chinese Academy of Agricultural Sciences, Beijing, between 11-14 April 1988. The report on the meeting consists of a presentation of the seven technical sessions which dealt with topics such as nuclear techniques in industry, agriculture and medicine, nuclear power and of the project reports under RCA

  8. Report of results on the research and development work 1979 of the Institute for Technical Chemistry

    International Nuclear Information System (INIS)

    1980-02-01

    The results report on the research and development work in 1979 carried out at the Institute for Technical Physics of the Nuclear Research Centre, Karlsruhe is concerned here. The main field of this development work is the research into superconducting magnets for fusion reactors. Studies are published on the material, processing and shape of these magnets. Furthermore, a report is given on fusion magnet technology, superconducting fundamentals and technical superconductors, as well as an cryonergy technique and cryotechnique. (KBI) [de

  9. Waste Contaminants at Military Bases Working Group report

    International Nuclear Information System (INIS)

    1993-01-01

    The Waste Contaminants at Military Bases Working Group has screened six prospective demonstration projects for consideration by the Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT). These projects include the Kirtland Air Force Base Demonstration Project, the March Air Force Base Demonstration Project, the McClellan Air Force Base Demonstration Project, the Williams Air Force Base Demonstration Project, and two demonstration projects under the Air Force Center for Environmental Excellence. A seventh project (Port Hueneme Naval Construction Battalion Center) was added to list of prospective demonstrations after the September 1993 Working Group Meeting. This demonstration project has not been screened by the working group. Two additional Air Force remediation programs are also under consideration and are described in Section 6 of this document. The following information on prospective demonstrations was collected by the Waste Contaminants at Military Bases Working Group to assist the DOIT Committee in making Phase 1 Demonstration Project recommendations. The remainder of this report is organized into seven sections: Work Group Charter's mission and vision; contamination problems, current technology limitations, and institutional and regulatory barriers to technology development and commercialization, and work force issues; screening process for initial Phase 1 demonstration technologies and sites; demonstration descriptions -- good matches;demonstration descriptions -- close matches; additional candidate demonstration projects; and next steps

  10. Flattening the organization: implementing self-directed work groups.

    Science.gov (United States)

    Brandon, G M

    1996-01-01

    In response to tremendous growth of managed care and threats to financial stability and job security, the Greater Baltimore Medical Center (GBMC) restructured itself into independent business units. The radiology department at GBMC resolved to reduce cost per unit-of-service, improve service, determine optimal staffing levels and reduce the number of layers of organization. It was decided to achieve those goals by implementing self-directed work groups. Staff buy-in was critical to success of the project. To begin, the staff was educated intensively about current trends in healthcare, managed care and potential changes in the job market. The radiology department was allowed to reduce the size of its staff through attrition and worked hard to focus staff concern on the impact each individual could have on the bottom line and the resultant effect on job security. Self-directed work groups were designed on a matrix that used small "service teams" in combinations to form larger "work groups." Actual work and daily activities occur at the service team level; information exchange and major decisions occue at the work group level. Seventeen months after beginning the project and 10 months after implementation, the organization has flattened, staff members have adjusted well to new roles, there have been no lay-offs, and the matrix system of small and large groups have proved particularly valuable.

  11. Working Group on Isotopes in Hydrology, Grenoble, October 1965

    International Nuclear Information System (INIS)

    1966-08-01

    The purpose of this Working Group organised by the International Atomic Energy Agency, which met at the Centre d'Etudes Nucleaires in Grenoble by invitation of the French Atomic Energy Commission, was to provide an opportunity for the different groups engaged upon the use of isotope techniques in hydrology to discuss their present work and indicate the main lines of future work. In accordance with the decision of the meeting, members of the Section of Hydrology of the Agency have prepared this report based on written contributions submitted by participants of the meeting and on the discussions which took place. It is hoped that this report will be of interest not only to groups engaged in this work but also to hydrologists wishing to know what types of studies are in progress and where they are being carried

  12. Background and future activities of PBNCC's nuclear training working group

    International Nuclear Information System (INIS)

    Chong Hun Rieh; Kunmo Chung; Hamlin, K.W.

    1987-01-01

    This paper presents a review of the background and activities of the nuclear training working group of the Pacific Basin Nuclear Cooperation Committee. The working group has examined various mechanisms for regional cooperation including the development of aregional catalog of training programs and the conceptualization of sharing training facilities among nuclear operators in the region. The working group has focused its attention on the exchange of information on the on-going training programs, operator training facilities, available resources for training assistance and proposed cooperative schemes. These activities are expected to continue and will provide invaluable information for nuclear power programs in the Pacific Basin region. The group also reviewed problems and issues associated with developing regional cooperation. (author)

  13. Background and future activities of PBNCC's nuclear training working group

    International Nuclear Information System (INIS)

    Rieh, C.H.; Chung, K.; Hamlin, K.W.

    1988-01-01

    This paper presents a review of the background and activities of the nuclear training working group of the Pacific Basin Nuclear Cooperation Committee. The working group has examined various mechanisms for regional cooperation including the development of a regional catalog of training programs and the conceptualization of sharing training facilities among nuclear operators in the region. The working group has focused its attention on the exchange of information on the on-going training programs, operator training facilities, available resources for training assistance and proposed cooperative schemes. These activities are expected to continue and will provide invaluable information for nuclear power programs in the Pacific Basin region. The group also reviewed problems and issues associated with developing regional cooperation

  14. Standardization activities of the Euratom Neutron Radiography Working Group

    International Nuclear Information System (INIS)

    Domanus, J.

    1982-06-01

    In 1979 a working group on neutron radiography was formed at Euratom. The purpose of this group is the standardization of neutron radiographic methods in the field of nuclear fuel. Activities of this Neutron Radiography Working Group are revised. Classification of defects revealed by neutron radiography is illustrated in a special atlas. Beam purity and sensitivity indicators are tested together with a special calibration fuel pin. All the Euratom neutron radiography centers will perform comparative neutron radiography with those items. The measuring results obtained, using various measuring aparatus will form the basis to formulate conclusions about the best measuring methods and instruments to be used in that field. Besides the atlas of neutron radiographic findings in light water reactor fuel, the Euratom Neutron Radiogrphy Working Group has published a neutron radiography handbook in which the neutron radiography installations in the European Community are also described. (author)

  15. The International Space Life Sciences Strategic Planning Working Group

    Science.gov (United States)

    White, Ronald J.; Rabin, Robert; Lujan, Barbara F.

    1993-01-01

    Throughout the 1980s, ESA and the space agencies of Canada, Germany, France, Japan, and the U.S. have pursued cooperative projects bilaterally and multilaterally to prepare for, and to respond to, opportunities in space life sciences research previously unapproachable in scale and sophistication. To cope effectively with likely future space research opportunities, broad, multilateral, coordinated strategic planning is required. Thus, life scientists from these agencies have allied to form the International Space Life Sciences Strategic Planning Working Group. This Group is formally organized under a charter that specifies the purpose of the Working Group as the development of an international strategic plan for the space life sciences, with periodic revisions as needed to keep the plan current. The plan will be policy-, not operations-oriented. The Working Group also may establish specific implementation teams to coordinate multilateral science policy in specific areas; such teams have been established for space station utilization, and for sharing of flight equipment.

  16. Progress report on the work of sub-group B

    International Nuclear Information System (INIS)

    Buck, C.; Tamiya, S.

    1979-01-01

    This paper reviews sub group B's 11 tasks, commenting upon each and noting what work remains to be done and the procedure adopted for completing it. The majority of the tasks have been completed and it was decided that further consideration of their assessment of proliferation resistance, institutional and safeguards questions and the economic assessment of reprocessing be carried out jointly with sub group A. It was also agreed that all further meetings of sub group B should take place jointly with sub group A

  17. Nuclear Forensics: Report of the AAAS/APS Working Group

    Science.gov (United States)

    Tannenbaum, Benn

    2008-04-01

    This report was produced by a Working Group of the American Physical Society's Program on Public Affairs in conjunction with the American Association for the Advancement of Science Center for Science, Technology and Security Policy. The primary purpose of this report is to provide the Congress, U.S. government agencies and other institutions involved in nuclear forensics with a clear unclassified statement of the state of the art of nuclear forensics; an assessment of its potential for preventing and identifying unattributed nuclear attacks; and identification of the policies, resources and human talent to fulfill that potential. In the course of its work, the Working Group observed that nuclear forensics was an essential part of the overall nuclear attribution process, which aims at identifying the origin of unidentified nuclear weapon material and, in the event, an unidentified nuclear explosion. A credible nuclear attribution capability and in particular nuclear forensics capability could deter essential participants in the chain of actors needed to smuggle nuclear weapon material or carry out a nuclear terrorist act and could also encourage states to better secure such materials and weapons. The Working Group also noted that nuclear forensics result would take some time to obtain and that neither internal coordination, nor international arrangements, nor the state of qualified personnel and needed equipment were currently enough to minimize the time needed to reach reliable results in an emergency such as would be caused by a nuclear detonation or the intercept of a weapon-size quantity of material. The Working Group assesses international cooperation to be crucial for forensics to work, since the material would likely come from inadequately documented foreign sources. In addition, international participation, if properly managed, could enhance the credibility of the deterrent effect of attribution. Finally the Working Group notes that the U.S. forensics

  18. IAU Astronomy for Equity and Inclusion Working Group

    Science.gov (United States)

    Ortiz-Gil, A.; García, B.; WG3 of Commission C1 Division C of the IAU

    2017-03-01

    In this talk we present the aims, goals and activities that have been started by the working group on Astronomy for Equity and Inclusion. This working group is part of Commission 1 ''Astronomy Education and Development'' of Division C ''Education, Outreach and Heritage'' of the International Astronomical Union (IAU). The working group was born with the aim of developing new strategies and resources to promote the access to Astronomy, both at the profesional and outreach levels, for persons with special needs or for those who could be excluded because of race or sexual orientation (among other reasons). It is composed of astronomers affiliated with the IAU and other volunteers who work in astronomy, education and special needs, as well as partner organizations like the IAU Office of Astronomy for Development (OAD), Astronomers without Borders (AWB), the Galileo Teacher Training Program (GTTP) or Universe Awareness (UNAWE). To reach those goals we have started different initiatives which are outlined at the working group’s website, like a repository of resources or the creation of a document about good practices, and the establishment of a tight collaboration with the Working Group about Accessibility of the American Astronomical Society, which was formed recently too.

  19. 40 CFR 35.4190 - How does my group identify a qualified technical advisor?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false How does my group identify a qualified technical advisor? 35.4190 Section 35.4190 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS...: (1) Demonstrated knowledge of hazardous or toxic waste issues, relocation issues, redevelopment...

  20. Neural activity reveals perceptual grouping in working memory.

    Science.gov (United States)

    Rabbitt, Laura R; Roberts, Daniel M; McDonald, Craig G; Peterson, Matthew S

    2017-03-01

    There is extensive evidence that the contralateral delay activity (CDA), a scalp recorded event-related brain potential, provides a reliable index of the number of objects held in visual working memory. Here we present evidence that the CDA not only indexes visual object working memory, but also the number of locations held in spatial working memory. In addition, we demonstrate that the CDA can be predictably modulated by the type of encoding strategy employed. When individual locations were held in working memory, the pattern of CDA modulation mimicked previous findings for visual object working memory. Specifically, CDA amplitude increased monotonically until working memory capacity was reached. However, when participants were instructed to group individual locations to form a constellation, the CDA was prolonged and reached an asymptote at two locations. This result provides neural evidence for the formation of a unitary representation of multiple spatial locations. Published by Elsevier B.V.

  1. Working group on a database for cold moderators

    International Nuclear Information System (INIS)

    Broome, T. A.

    1997-09-01

    The working group meeting was chaired by Broome. The working group was charged with the task: Gather a table of neutronic performance known for specific designs; operational, test, theoretical/calculated. Set up generation of a (very briefly) annotated bibliography on this topic. A joint meeting with the Working Group on Moderator Performance Measurements was held to define the data on cold moderators which should be contained in the data base. It became clear that there exists only a small amount of data in very different forms much of it incomplete in its detail. So, rather than spending time collating existing data, it was considered to be more generally profitable to concentrate on the specification of the database and its implementation. The aim was to propose a system which could start quickly and simply yet be capable of extension and development in the future. The system was outlined in the summary session of the workshop and agreed by the participants.

  2. HEP-FCE Working Group on Libraries and Tools

    Energy Technology Data Exchange (ETDEWEB)

    Borgland, Anders [SLAC National Accelerator Lab., Menlo Park, CA (United States); Elmer, Peter [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Kirby, Michael [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Patton, Simon [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Potekhin, Maxim [Brookhaven National Lab. (BNL), Upton, NY (United States); Viren, Brett [Brookhaven National Lab. (BNL), Upton, NY (United States); Yanny, Brian [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2014-12-19

    The High-Energy Physics Forum for Computational Excellence (HEP-FCE) was formed by the Department of Energy as a follow-up to a recent report from the Topical Panel on Computing[1] and the associated P5 recommendation[2]. It is a pilot project distributed across the DOE Labs. During this initial incubation period the Forum is to develop a plan for a robust, long-term organization structure and a functioning web presence for forum activities and outreach, and a study of hardware and software needs across the HEP program. In the following sections we give this working group’s “vision” for aspects and qualities we wish to see in a future HEP-FCE. We then give a prioritized list of technical activities with suggested scoping and deliverables that can be expected to provide cross-experiment benefits. The remaining bulk of the report gives a technical survey of some specific “areas of opportunity” for cross-experiment benefit in the realm of software libs/tools. This survey serves as support for the vision and prioritized list. For each area we describe the ways that cross-experiment benefit is achieved today, as well as describe known failings or pitfalls where such benefit has failed to be achieved and which should be avoided in the future. For both cases, we try to give concrete examples. Each area then ends with an examination of what opportunities exist for improvements in that particular area.

  3. Group Work with Adolescents: Principles and Practice. Second Edition. Social Work Practice with Children and Families

    Science.gov (United States)

    Malekoff, Andrew

    2006-01-01

    This popular text provides essential knowledge and skills for conducting creative, strengths-based group work with adolescents. A rich introduction to the field, enlivened by numerous illustrations from actual sessions, the book provides principles and guidelines for practice in a wide range of settings. The book covers all phases of group work,…

  4. Group Work Education in Social Work: A Review of the Literature Reveals Possible Solutions

    Science.gov (United States)

    LaRocque, Sarah E.

    2017-01-01

    This article examines the growing concerns in the literature that traditional group work education in social work is not providing the foundational knowledge, skills, evidence-based practice, professional uses of self, and adherence to practice standards necessary for effective group practice. An exploration of the best available evidence on group…

  5. Technical Work Plan for: Additional Multiscale Thermohydrologic Modeling

    International Nuclear Information System (INIS)

    B. Kirstein

    2006-01-01

    will be evaluated and justified. Some of this evaluation will be conducted in conjunction with the post-model development validation activity involving comparisons of predicted TH conditions with measured TH conditions in the DST. The expected result is that, consistent with what was found in Revision 03 of Multiscale Thermohydrologic Model (BSC 2005 [DIRS 173944], Section 6.3.9), near-field/in-drift TH behavior is insensitive to a wide range of host-rock hydrologic property values. It is the intention of the work described in this TWP to propagate the new infiltration fluxes from the replacement infiltration model, by using the percolation fluxes from the revised site-scale unsaturated zone (UZ) flow model that has applied those new infiltration fluxes. The percolation flux distributions will be obtained from the updated site-scale UZ flow model, which has applied updated infiltration flux maps. Another objective of the work scope is to develop, implement, and validate a revised TH submodel-construction approach. This revised approach utilizes interpolation among a set of generic LDTH submodels that are run for a range of percolation flux histories that cover a sufficiently broad range of infiltration flux uncertainty, as well as for four host-rock units (two lithophysal units and two nonlithophysal units), and for three thermal property sets (low, mean, and high). A key motivation for this revised LDTH submodel-construction approach is to enable the MSTHM to be more flexible in addressing a broad range of infiltration flux cases. This approach allows the generic LDTH submodel simulations to be conducted prior to receiving percolation flux maps

  6. Cultivating and Benefiting from Member Familiarity in Temporary Work Groups

    DEFF Research Database (Denmark)

    Hessel, Shannon

    In this paper, I investigate an example of short-duration, time-bound project work conducted by high-performing groups in order to surprise our expectations regarding the motivations and potential to cooperate and to cultivate group member familiarity within such temporary organizations. Project...... limited time and a perceived short shadow of the future. Several contributions result: First, I challenge our expectation that a short shadow of the future will decrease the likelihood of cooperation by demonstrating how the clan-like tendency to construct common values and aspirations motivated...... cooperative behavior in these groups. Second, I challenge our expectation that a task-oriented over relationship-oriented approach will inevitably dominate work when projects are time-bound and of short duration by describing moments in which these groups chose relationship-oriented activities despite time...

  7. UTM Data Working Group Demonstration 1: Final Report

    Science.gov (United States)

    Rios, Joseph L.; Mulfinger, Daniel G.; Smith, Irene S.; Venkatesan, Priya; Smith, David R.; Baskaran, Vijayakumar; Wang, Leo

    2017-01-01

    This document summarizes activities defining and executing the first demonstration of the NASA-FAA Research Transition Team (RTT) Data Exchange and Information Architecture (DEIA) working group (DWG). The demonstration focused on testing the interactions between two key components in the future UAS Traffic Management (UTM) System through a collaborative and distributed simulation of key scenarios. The summary incorporates written feedback from each of the participants in the demonstration. In addition to reporting the activities, this report also provides some insight into future steps of this working group.

  8. Enhancing the Effectiveness of Work Groups and Teams: A Reflection.

    Science.gov (United States)

    Kozlowski, Steve W J

    2018-03-01

    Teamwork has been at the core of human accomplishment across the millennia, and it was a focus of social psychological inquiry on small group behavior for nearly half a century. However, as organizations world-wide reorganized work around teams over the past two decades, the nature of teamwork and factors influencing it became a central focus of research in organizational psychology and management. In this article, I reflect on the impetus, strategy, key features, and scientific contribution of "Enhancing the Effectiveness of Work Groups and Teams," by Kozlowski and Ilgen, a review monograph published in Psychological Science in the Public Interest in 2006.

  9. Group Work Tests for Context-Rich Problems

    Science.gov (United States)

    Meyer, Chris

    2016-05-01

    The group work test is an assessment strategy that promotes higher-order thinking skills for solving context-rich problems. With this format, teachers are able to pose challenging, nuanced questions on a test, while providing the support weaker students need to get started and show their understanding. The test begins with a group discussion phase, when students are given a "number-free" version of the problem. This phase allows students to digest the story-like problem, explore solution ideas, and alleviate some test anxiety. After 10-15 minutes of discussion, students inform the instructor of their readiness for the individual part of the test. What follows next is a pedagogical phase change from lively group discussion to quiet individual work. The group work test is a natural continuation of the group work in our daily physics classes and helps reinforce the importance of collaboration. This method has met with success at York Mills Collegiate Institute, in Toronto, Ontario, where it has been used consistently for unit tests and the final exam of the grade 12 university preparation physics course.

  10. Introduction of the UNIX International Performance Management Work Group

    Science.gov (United States)

    Newman, Henry

    1993-01-01

    In this paper we presented the planned direction of the UNIX International Performance Management Work Group. This group consists of concerned system developers and users who have organized to synthesize recommendations for standard UNIX performance management subsystem interfaces and architectures. The purpose of these recommendations is to provide a core set of performance management functions and these functions can be used to build tools by hardware system developers, vertical application software developers, and performance application software developers.

  11. Overview on pre-harmonization studies conducted by the Working Group on Codes and Standards

    International Nuclear Information System (INIS)

    Guinovart, J.

    1998-01-01

    For more than twenty years, the Working Group on Codes and Standards (WGCS) has been an Advisory Expert Group of the European Commission and three subgroups were formed to consider manufacture and inspection, structural mechanics and materials topics. The WGCS seeks to promote studies at the pre-harmonisation level, for the clarification and building of consensus in the European Community concerning technical issues of relevance for the integrity of safety-related components. It deals with pre-standardization process regarding industrial codes whose rules are applicable to design, construction and operation of NPP components in European Community

  12. School-to-Work Transition of Career and Technical Education Graduates

    Science.gov (United States)

    Packard, Becky Wai-Ling; Leach, Miki; Ruiz, Yedalis; Nelson, Consuelo; DiCocco, Hannah

    2012-01-01

    This study analyzed the career development of career and technical education (CTE) high school graduates during their school-to-work transition, specifically their adaptability in the face of barriers. Forty graduates (22 men, 18 women) from working-class backgrounds participated in baseline surveys at graduation and phenomenological interviews 1…

  13. Investigating the LGBTQ Responsive Model for Supervision of Group Work

    Science.gov (United States)

    Luke, Melissa; Goodrich, Kristopher M.

    2013-01-01

    This article reports an investigation of the LGBTQ Responsive Model for Supervision of Group Work, a trans-theoretical supervisory framework to address the needs of lesbian, gay, bisexual, transgender, and questioning (LGBTQ) persons (Goodrich & Luke, 2011). Findings partially supported applicability of the LGBTQ Responsive Model for Supervision…

  14. 77 FR 70421 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2012-11-26

    ... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Space and Missile Systems Center, Global Positioning Systems (GPS) Directorate, Department of the Air Force, DoD. ACTION: Meeting Notice. SUMMARY: This meeting notice is to inform GPS...

  15. 78 FR 63459 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2013-10-24

    ... DEPARTMENT OF DEFENSE Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Department of the Air Force. ACTION: Meeting Notice. SUMMARY: This meeting notice is to inform GPS simulator manufacturers, who supply products to the Department of Defense (DoD), and GPS simulator users, both government...

  16. Recent activities of the ESARDA working group on NDA

    International Nuclear Information System (INIS)

    Harry, R.J.S.

    1983-01-01

    The European Safeguards Research and Development Association, ESARDA, has one of the largest coordinated safeguards and development programs in the world. There are several working groups for specific R and D activities. One of these is the ''ESARDA Working Group on Techniques and Standards for non-Destructive Analysis''. The NDA working group has initiated the international project of the preparation of uranium oxide certified reference materials for the gamma spectrometric determination of the enrichment, which are made in a collaboration with the US NBS and the European Communities' Central Bureau for Nuclear Measurements, CBNM, at Geel. The possibility of a similar type of reference material for Pu isotopic abundance measurements is investigated at CBNM, and the pilot samples may become available for intercomparisons. Safeguards acceptability and users manual have been considered carefully. The working group has undertaken an intercomparison on the determination of plutonium isotopic ratios by gamma spectrometry, using NBS-SRM's-946, -947 and 948. A new exercise on 0,5 gram samples of seven different isotopic compositions samples will be executed under the name PIDIE (Plutonium Isotopic Determination Intercomparison Exercise)

  17. The OMERACT Ultrasound Working Group 10 Years On

    DEFF Research Database (Denmark)

    Bruyn, George A; Naredo, Esperanza; Iagnocco, Annamaria

    2015-01-01

    Musculoskeletal ultrasound (US) now thrives as an established imaging modality for the investigation and management of chronic inflammatory arthritis. We summarize here results of the Outcome Measures in Rheumatology (OMERACT) US working group (WG) projects of the last 2 years. These results were...

  18. 78 FR 67132 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2013-11-08

    ... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group... simulator manufacturers, who supply products to the Department of Defense (DoD), and GPS simulator users..., and email address) to [email protected]us.af.mil and have your security personnel submit your VAR...

  19. Online Group Work Design: Processes, Complexities, and Intricacies

    Science.gov (United States)

    Kleinsasser, Robert; Hong, Yi-Chun

    2016-01-01

    This paper describes the challenges of designing and implementing online group work. We are responsible for a seven-and-a-half week's online literacy and bi-literacy graduate course in a Bilingual/English as a Second Language (BLE/ESL) Master of Arts program. One of the tasks includes online literacy circle exchanges where students are encouraged…

  20. Summary report for the Microwave Source Working Group

    International Nuclear Information System (INIS)

    Westenskow, G.A.

    1997-01-01

    This report summarizes the discussions of the Microwave Source Working Group during the Advanced Accelerator Concepts Workshop held October 13-19, 1996 in the Granlibakken Conference Center at Lake Tahoe, California. Progress on rf sources being developed for linear colliders is reviewed. Possible choices for high-power rf sources at 34 GHz and 94 GHz for future colliders are examined. 27 refs

  1. ACPSEM brachytherapy working group recommendations for quality assurance in brachytherapy

    International Nuclear Information System (INIS)

    Dempsey, Claire; Smith, Ryan; Nyathi, Thulani; Ceylan, Abdurrahman; Howard, Lisa; Patel, Virendra; Dam, Ras; Haworth, Annette

    2013-01-01

    The Australasian College of Physical Scientists and Engineers in Medicine (ACPSEM) Radiation Oncology Specialty Group (ROSG) formed a series of working groups in 2011 to develop recommendation papers for guidance of radiation oncology medical physics practice within the Australasian setting. These recommendations are intended to provide guidance for safe work practices and a suitable level of quality control without detailed work instructions. It is the responsibility of the medical physicist to ensure that locally available equipment and procedures are sufficiently sensitive to establish compliance to these recommendations. The recommendations are endorsed by the ROSG, have been subject to independent expert reviews and have also been approved by the ACPSEM Council. For the Australian audience, these recommendations should be read in conjunction with the Tripartite Radiation Oncology Practice Standards. This publication presents the recommendations of the ACPSEM Brachytherapy Working Group (BTWG) and has been developed in alignment with other international associations. However, these recommendations should be read in conjunction with relevant national, state or territory legislation and local requirements, which take precedence over the ACPSEM recommendation papers. It is hoped that the users of this and other ACPSEM recommendation papers will contribute to the development of future versions through the Radiation Oncology Specialty Group of the ACPSEM.

  2. Division X Working Group on Historic Radio Astronomy

    NARCIS (Netherlands)

    Orchiston, Wayne; Kellermann, Kenneth I.; Davies, Rodney D.; Débarbat, Suzanne V.; Morimoto, Masaki; Slysh, Slava; Swarup, Govind; van Woerden, Hugo; Wall, Jasper V.; Wielebinski, Richard

    During the Rio General Assembly we held the following meetings of the Working Group: a Business Meeting, a Science Meeting on “The Development of Aperture Synthesis Imaging in Radio Astronomy”, and a Science Meeting on “Recent Research”.

  3. Improving Group Work Practices in Teaching Life Sciences: Trialogical Learning

    Science.gov (United States)

    Tammeorg, Priit; Mykkänen, Anna; Rantamäki, Tomi; Lakkala, Minna; Muukkonen, Hanni

    2017-08-01

    Trialogical learning, a collaborative and iterative knowledge creation process using real-life artefacts or problems, familiarizes students with working life environments and aims to teach skills required in the professional world. We target one of the major limitation factors for optimal trialogical learning in university settings, inefficient group work. We propose a course design combining effective group working practices with trialogical learning principles in life sciences. We assess the usability of our design in (a) a case study on crop science education and (b) a questionnaire for university teachers in life science fields. Our approach was considered useful and supportive of the learning process by all the participants in the case study: the students, the stakeholders and the facilitator. Correspondingly, a group of university teachers expressed that the trialogical approach and the involvement of stakeholders could promote efficient learning. In our case in life sciences, we identified the key issues in facilitating effective group work to be the design of meaningful tasks and the allowance of sufficient time to take action based on formative feedback. Even though trialogical courses can be time consuming, the experience of applying knowledge in real-life cases justifies using the approach, particularly for students just about to enter their professional careers.

  4. Summary report for the Microwave Source Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Westenskow, G.A.

    1997-01-01

    This report summarizes the discussions of the Microwave Source Working Group during the Advanced Accelerator Concepts Workshop held October 13-19, 1996 in the Granlibakken Conference Center at Lake Tahoe, California. Progress on rf sources being developed for linear colliders is reviewed. Possible choices for high-power rf sources at 34 GHz and 94 GHz for future colliders are examined. 27 refs.

  5. Final detailed report of the work group number 3

    International Nuclear Information System (INIS)

    1999-01-01

    The objective of this work group was to propose the tools the most adapted for the evaluation of radionuclides concentration of the north Cotentin in environment, on searching to validate the model of transfer of radionuclides released by industries by comparing them to the measures realised by the different stakeholders. (N.C.)

  6. International Work Group Criteria for the Diagnosis of Alzheimer Disease

    NARCIS (Netherlands)

    Cummings, J.L.; Dubois, B; Molinuevo, J.L.; Scheltens, P.

    2013-01-01

    Alzheimer-type biomarker changes are identifiable in asymptomatic and mildly symptomatic predementia phases of Alzheimer disease (AD) and AD dementia. The International Work Group (IWG) guidelines for diagnosis identify a unified spectrum of 3 phases. The classic clinical feature that indicates AD

  7. International Consultation and Training on Group Work in South Asia

    Science.gov (United States)

    Ibrahim, Farah A.

    2015-01-01

    This article presents a consultation and training for faculty and graduate students in South Asia under the auspices of the United Nations' Transfer of Knowledge Through Expatriate Nationals (TOKTEN) Program. It describes the development of a consultation relationship and training on group work. Needs assessments focusing on both cultural…

  8. Big Data: Laying the Groundwork. ECAR Working Group Paper

    Science.gov (United States)

    Almes, Guy T.; Hillegas, Curtis W.; Lance, Timothy; Lynch, Clifford A.; Monaco, Gregory E.; Mundrane, Michael R.; Zottola, Ralph J.

    2014-01-01

    This paper is part of series of the EDUCAUSE Center for Analysis and Research Campus Cyberinfrastructure (ECAR-CCI) Working Group. The topic of big data continues to receive a great deal of publicity because of its promise for opening new avenues of scholarly discovery and commercial opportunity. The ability to sift rapidly through massive amounts…

  9. Small arms proliferation. Report on working group 2

    International Nuclear Information System (INIS)

    1998-01-01

    The working group reported on the proliferation of small arms, light weapons non-lethal weapons, which have traditionally been given little attention in international talks on peace on the contrary to nuclear weapons which have been tested during the Second World War but never used in war later

  10. Automated Image Analysis Corrosion Working Group Update: February 1, 2018

    Energy Technology Data Exchange (ETDEWEB)

    Wendelberger, James G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-01

    These are slides for the automated image analysis corrosion working group update. The overall goals were: automate the detection and quantification of features in images (faster, more accurate), how to do this (obtain data, analyze data), focus on Laser Scanning Confocal Microscope (LCM) data (laser intensity, laser height/depth, optical RGB, optical plus laser RGB).

  11. Working group report: Low energy and flavour physics

    Indian Academy of Sciences (India)

    This is a report of the low energy and flavour physics working group at ... that calculates the non-leptonic decay amplitudes including the long-distance con- tributions. There were three lectures that lasted for over seven hours, and were.

  12. Report of the National Technical Planning Group on Uranium Tailings Research

    International Nuclear Information System (INIS)

    Lapp, P.A.

    1981-09-01

    The National Technical Planning Group on Uranium Tailings Research was formed in 1980 to review present activities and plan a research program on the management of wastes after a mine and mill have shut down. At present there are more than 100 million tonnes of uranium tailings on the surface in Canada. Most of these are under management; however, some 8 million tonnes have been abandoned completely. The group concluded that: 1) there has been no systematic attempt to collect and organize the results of measurements already made on tailings; 2) there is an inadequate understanding of the processes that take place in tailings and in the pathways to the biosphere; 3) there is insufficient evidence on the extent of the long-term problem in the closeout of a uranium tailings basin; 4) there is a need to establish standardized measurement methodologies to improve the quality of data taken at different sites across Canada; 5) generic research and development on tailings disposal technology should be within the scope of a national program, whereas site-specific work is the purview of the mines and regulatory agencies; and 6) the uranium producers' contribution to the national tailings program should be their research on site-specific disposal alternatives. The first of these conclusions leads to the proposal to establish a national uranium tailings research program. The second suggests the need for a modelling program, the third and fourth for a national measurement program, and the remaining conclusions refer to disposal technologies research. The conclusions form the basis for a set of recommendations on uranium tailings research

  13. Working Group 2 summary: Space charge effects in bending systems

    International Nuclear Information System (INIS)

    Bohn, C.L.; Emma, P.J.

    2000-01-01

    At the start of the Workshop, the authors asked the Working Group 2 participants to concentrate on three basic goals: (1) survey the status of how comprehensively the physics concerning space-charge effects in bends is understood and how complete is the available ensemble of analytic and computational tools; (2) guided by data from experiments and operational experience, identify sources of, and cures for, beam degradation; and (3) review space-charge physics in rings and the limitations it introduces. As the Workshop unfolded, the third goal naturally folded into the other two goals, and these goals, they believe, were fulfilled in that the Working Group was able to compile an end product consisting of a set of recommendations for potentially fruitful future work. This summary constitutes an overview of the deliberations of the Working Group, and it is their hope that the summary clarifies the motivation for the recommended work listed at the end. The summary is organized according to the two aforementioned goals, and the prime topics of discussion appear as subsections under these goals

  14. Reality and Analysis: Personal and Technical Reflections on the Working Lives of Six Women.

    OpenAIRE

    Chen, M.; Jhabvala, R.; Kanbur, R.; Mirani, N.; Osner, Karl (Eds) WIEGO

    2004-01-01

    A group of development analysts had a dialogue about labor market, trade and poverty issues in 2004. They preceded the dialogue with exposure to the realities of the lives of six remarkable women from the Self-Employed Women's Association (SEWA) in Gujarat, India. The struggles faced by the authors provided the frame for the technical dialogue that followed. This is a Compendium of personal and technical reflections of the analysts involved in the exercise.

  15. Improving non-technical skills (teamwork) in post-partum haemorrhage: A grouped randomised trial.

    Science.gov (United States)

    Letchworth, Pippa M; Duffy, Shane P; Phillips, Dan

    2017-10-01

    To determine the effect of a decision support technology on teamwork and associated non-technical (NTS) and technical skills when teams manage post-partum haemorrhage (PPH) in the simulated environment. Multidisciplinary (MDT) maternity teams were taught how to manage post partum haemorrhage. They were randomised to the intervention: using a decision support mobile digital platform or a control group. Each team managed a post-partum simulation, which was recorded and reviewed by assessors. Primary outcome measures to assess teams NTS were the validated Global Assessment of Obstetric Team Performance (GAOTP) and Clinical Teamwork Scale (CTS). Secondary outcome measures were the 'friends and family test', technical skills, and the System Usability Scale (SUS). Sample size estimation was calculated by using 80% power 5% significance two tailed test (p1=85% p2=40%) n=34. 38 teams from August 2014-February 2016, were recruited, technical issues with failure of recording equipment meant 4 teams were excluded from teamwork analysis (1 intervention 3 control). Teamwork improved across all domains with the intervention (using a decision support mobile digital platform) p teamwork by 25% using CTS and 22% using GAOTP. Fewer technical skills were missed with the intervention (pteamwork is often cited as the cause of failures in care and we report a usable technology that assists with and improves teamwork during an emergency. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. GGOS working group on ground networks and communications

    Science.gov (United States)

    Pearlman, M.; Altamimi, Z.; Beck, N.; Forsberg, R.; Gurtner, W.; Kenyon, S.; Behrend, D.; Lemoine, F. G.; Ma, C.; Noll, C. E.; hide

    2005-01-01

    Activities of this Working Group include the investigation of the status quo and the development of a plan for full network integration to support improvements in terrestrial reference frame establishment and maintenance, Earth orientation and gravity field monitoring, precision orbit determination, and other geodetic and gravimetric applications required for the long-term observation of global change. This integration process includes the development of a network of fundamental stations with as many co-located techniques as possible, with precisely determined intersystem vectors. This network would exploit the strengths of each technique and minimize the weaknesses where possible. This paper discusses the organization of the working group, the work done to date, and future tasks.

  17. Development Strategy of Microtakaful Institutions: Case Study Working Group Indonesia

    Directory of Open Access Journals (Sweden)

    Aam Slamet Rusydiana

    2017-07-01

    Full Text Available Indonesia is becoming one of potential countries in microtakaful institutions development. One of the expert in microtakaful is Takmin Working Group. TWG is a group of initiators who have commitment to develop micro takaful in Indonesia. Its members consist ofexperts in Islamic insurance, micro finance and accounting. The research objectives of this study are to identify and analyze the problems faced by TWG in developing of microtakaful institutions and identify the solutions to solve those kinds of problems, by using AnalticHierarchy Process (AHP method. The finding of this study shows the most priority solutions that can be undertake by Takmin Working Group to solve these both internal and external problem is information system development, and then followed by innovative product development. Communication & visitation to Islamic micro finance institutions and socialization about micro takaful product to society are being less priority on this matter.DOI: 10.15408/etk.v16i2.5267

  18. Deliberations of working group 4: is there a new dynamics of dialogue and decision making?

    International Nuclear Information System (INIS)

    Kotra, J.P.

    2000-01-01

    The context for the working group's discussions was set by two papers: 'Lessons Learnt from the DECI project on different processes for Public Participation and Transparency in Decision making' and 'A New Siting Process in France for a URL in Granite: Lessons Learnt from the recently undertaken Consultation Mission (January-June 2000). As further evidence of change affecting the way waste managers and regulators communicate with their stakeholders, the group heard two presentations of specific case studies of waste disposal programmes encountering and responding to a new dynamic. (Belgium's revised approach to siting a low- and intermediate-level waste facility). Key factors in the new approach adopted by the Belgian government were the clear separation of ethical and technical choices, and the pursuit of partnerships with local municipalities. Many members of the working group were clearly impressed with the extent of trust and reliance placed on the decisions of the participating communities. Next, the group chairperson, discussed recent attempts by the US Nuclear Regulatory Commission to encourage greater public involvement in the development of new regulations for the proposed repository at Yucca Mountain. This was followed by an active and lively discussion among all members of the working group. Frequently the 'new dynamics of dialogue and decision making' were characterised as a shift from the traditional 'decide, announce and defend' approach for which the focus was almost exclusively on technical content, to one of 'engage, interact and co-operate' for which both technical content and quality of process are of comparable import to a constructive outcome. The session culminated with the identification of several possible means through which the FSC (Forum on Stakeholder Confidence) might contribute to and support member programmes as they endeavour to rise to the challenges posed y the new dynamics of dialogue. (author)

  19. The dynamics of access to groups in working memory.

    Science.gov (United States)

    Farrell, Simon; Lelièvre, Anna

    2012-11-01

    The finding that participants leave a pause between groups when attempting serial recall of temporally grouped lists has been taken to indicate access to a hierarchical representation of the list in working memory. An alternative explanation is that the dynamics of serial recall solely reflect output (rather than memorial) processes, with the temporal pattern at input merely suggesting a basis for the pattern of output buffering. Three experiments are presented here that disentangle input structure from output buffering in serial recall. In Experiment 1, participants were asked to recall a subset of visually presented digits from a temporally grouped list in their original order, where either within-group position or group position was kept constant. In Experiment 2, participants performed more standard serial recall of spoken digits, and input and output position were dissociated by asking participants to initiate recall from a post-cued position in the list. In Experiment 3, participants were asked to serially recall temporally grouped lists of visually presented digits where the grouping structure was unpredictable, under either articulatory suppression or silent conditions. The 3 experiments point to a tight linkage between implied memorial structures (i.e., the pattern of grouping at encoding) and the output structure implied by retrieval times and call into question a purely motoric account of the dynamics of recall.

  20. International working group on life management of nuclear power plants (IWG-LMNPP). Regular meeting. 30 August - 1 September 1995. Working material. V. 2

    International Nuclear Information System (INIS)

    1995-01-01

    This meeting of the International Working Group on Life Management of Nuclear Power Plants (IWG-LMNPP) was organized to review the national programmes of the countries and to advise the IAEA on its technical meetings and activities in the subject areas taking into consideration current progress, problems and operating experience. Refs, figs and tabs

  1. International working group on life management of nuclear power plants (IWG-LMNPP). Regular meeting. 30 August - 1 September 1995. Working material. V. 1

    International Nuclear Information System (INIS)

    1995-01-01

    This meeting of the International Working Group on Life Management of Nuclear Power Plants (IWG-LMNPP) was organized to review the national programmes of the countries and to advise the IAEA on its technical meetings and activities in the subject areas taking into consideration current progress, problems and operating experience. Refs, figs and tabs

  2. Response to the Report of the Transfermium Working Group

    International Nuclear Information System (INIS)

    Armbruster, P.; Hessberger, F.P.; Hofmann, S.; Leino, M.; Muenzenberg, G.; Reisdorf, W.; Schmidt, K.-H.

    1993-01-01

    The research group at the Gesellschaft fuer Schwerionenforschung highly appreciates the efforts of the International Union of Applied Chemistry and the International Union of Applied Physics to solve the longstanding problem of the priority of discovery of the heaviest elements by appointing the Transfermium Working Group. This international group of renowned experts in nuclear physics and chemistry, headed by Sir Denys Wilkinson, established criteria for the discovery of a new element and on the basis judged on the priorities of the discoveries of the transfermium elements. Members of this group were scientists from countries not involved in the discovery of a new element. The criteria for the discovery of new elements were developed after a careful study of the literature and after visits to the involved laboratories. Permanent contact was established with the researchers concerned by distributing the protocols of the TWG meetings. Only this procedure made it possible that the criteria were adapted to the most recent experimental developments. (Author)

  3. Interim report of working group of Nuclear Fusion Committee

    International Nuclear Information System (INIS)

    Takuma, Hiroshi

    1986-01-01

    The conclusion of the working group was presented as an interim report to the general meeting of Nuclear Fusion Committee, which became the base for deciding the future plan. The report was the result of the hard work for about a half year by five Committee experts and 23 researchers, and has the rich contents. At present, the supply of petroleum relaxed, and the trend that a large amount of investment for a long period for nuclear fusion research is problematical has become strong. Of course, the importance of the nuclear fusion research never changes. The research projects of Heliotron E, Gekko 12, Gamma 10 and so on have advanced, and the base for synthetically promoting the research has been completed. It is indispensable to decide the most effective plan for the next stage. The working group discussed on the five year plan, especially on the research based on a large project. The policy of the works and problems, the progress of the works of respective subgroups, and the summarization are reported. The researches on nuclear burning simulation, no current plasma using an external conductor system and making an axisymmetrical high-beta torus steady were proposed. (Kako, I.)

  4. The PDF4LHC Working Group Interim Report

    CERN Document Server

    Alekhin, Sergey; Ball, Richard D.; Bertone, Valerio; Blumlein, Johannes; Botje, Michiel; Butterworth, Jon; Cerutti, Francesco; Cooper-Sarkar, Amanda; de Roeck, Albert; Del Debbio, Luigi; Feltesse, Joel; Forte, Stefano; Glazov, Alexander; Guffanti, Alberto; Gwenlan, Claire; Huston, Joey; Jimenez-Delgado, Pedro; Lai, Hung-Liang; Latorre, Jose I.; McNulty, Ronan; Nadolsky, Pavel; Olaf Moch, Sven; Pumplin, Jon; Radescu, Voica; Rojo, Juan; Sjostrand, Torbjorn; Stirling, W.J.; Stump, Daniel; Thorne, Robert S.; Ubiali, Maria; Vicini, Alessandro; Watt, Graeme; Yuan, C.-P.

    2011-01-01

    This document is intended as a study of benchmark cross sections at the LHC (at 7 TeV) at NLO using modern parton distribution functions currently available from the 6 PDF fitting groups that have participated in this exercise. It also contains a succinct user guide to the computation of PDFs, uncertainties and correlations using available PDF sets. A companion note, also submitted to the archive, provides an interim summary of the current recommendations of the PDF4LHC working group for the use of parton distribution functions and of PDF uncertainties at the LHC, for cross section and cross section uncertainty calculations.

  5. [Analysis of work-related fatigue characteristics and its influencing factors in scientific and technical personnel].

    Science.gov (United States)

    Yang, Ting; Zhou, Dinglun; Song, Mingying; Lan, Yajia

    2015-02-01

    To investigate the current status and characteristics of work-related fatigue among scientific and technical personnel and its associated factors, and to provide a scientific basis for further interventions. A cross-sectional survey was conducted in the staff from a single scientific institution, using a self-administered questionnaire. Basic information of participants, Fatigue Scale-14, and Job Content Questionnaire were collected. The prevalence of work-related fatigue among the scientific and technical personnel was 54.6%; work-related fatigue was positively correlated with occupational stress (rs = 0.384, P work-related fatigue included occupational stress profiles, social support, and educational status. A higher risk of work-related fatigue was found in the staff under high stress, compared with those under low stress (OR = 8.5, 95%CI = 3.9∼18.7). Social support served as a protective factor for work-related fatigue, while a higher level of education was correlated with more severe work-related fatigue. Work-related fatigue is common and serious among scientific and technical personnel, especially in those under high stress. Effective interventions according to occupational stress are of great importance to reduce work-related fatigue.

  6. Perceived discontinuities and continuities in transdisciplinary scientific working groups.

    Science.gov (United States)

    Crowston, Kevin; Specht, Alison; Hoover, Carol; Chudoba, Katherine M; Watson-Manheim, Mary Beth

    2015-11-15

    We examine the DataONE (Data Observation Network for Earth) project, a transdisciplinary organization tasked with creating a cyberinfrastructure platform to ensure preservation of and access to environmental science and biological science data. Its objective was a difficult one to achieve, requiring innovative solutions. The DataONE project used a working group structure to organize its members. We use organizational discontinuity theory as our lens to understand the factors associated with success in such projects. Based on quantitative and qualitative data collected from DataONE members, we offer recommendations for the use of working groups in transdisciplinary synthesis. Recommendations include welcome diverse opinions and world views, establish shared communication practices, schedule periodic synchronous face-to-face meetings, and ensure the active participation of bridge builders or knowledge brokers such as librarians who know how to ask questions about disciplines not their own. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Summary report: working group 2 on 'Plasma Based Acceleration Concepts'

    International Nuclear Information System (INIS)

    Esarey, E.; Leemans, W.P.

    1998-01-01

    A summary of the talks, papers and discussion sessions presented in the Working Group on Plasma Based Acceleration Concepts is given within the context of the progress towards a 1 GeV laser driven accelerator module. The topics covered within the Working Group were self-modulated laser wakefield acceleration, standard laser wakefield acceleration, plasma beat wave acceleration, laser guiding and wake excitation in plasma channels, plasma wakefield acceleration, plasma lenses and optical injection techniques for laser wakefield accelerators. An overview will be given of the present status of experimental and theoretical progress as well as an outlook towards the future physics and technological challenges for the development of an optimized accelerator module

  8. Executive committee report: geotechnical instrumentation working group meeting

    International Nuclear Information System (INIS)

    Wilder, D.G.; Rogue, F.; Beloff, W.R.; Binnall, E.; Gregory, E.C.

    1982-01-01

    Responding to the widespread need for the geotechnical community to discuss instrumentation for nuclear waste repositories, a meeting was held December 2 and 3, 1981, in Denver, Colorado. This report gives the group's consensus recommendations to aid in making decisions for development of instrumentation for future repository work. The main conclusions of the working group meeting were as follows: (1) monitoring of geotechnical parameters in nuclear waste repositories will be necessary to meet licensing requirements; (2) currently available instruments are underdeveloped for this monitoring; (3) research and development to provide adequate instrumentation will need to be performed under federal sponsorship by national laboratories, universities, contractors, and consultants; and (4) a NASA-type reliability program is needed to meet the quality assurance, durability, calibration, and time schedule demands of geotechnical instrumentation development. This will require significant financial commitments from the federal sector

  9. Working Group on Ionising Radiations. Report 1987-88

    International Nuclear Information System (INIS)

    1989-01-01

    The programme of work for 1987/88 by the Working Group on Ionising Radiation, Health and Safety Commision in February 1988, included the main topics of continuing interest and concern in relation to ionising radiations in general and the Ionising Radiations Regulations 1985 (IRR 85) (Ref 1) in particular. These were: emergency dose limitation, occupational dose limitation, practical experience of the principle of keeping doses as low as reasonably practicable, experience of the regulatory requirements in respect of internal dosimetry and the need for a standing advisory committee on ionising radiations. Calibration of radiotherapy equipment was also considered as a matter of principle following a specific incident involving cancer patients. This report of progress during the first year summarises the Group's opinions on each topic and gives recommendations. (author)

  10. E-Beam Driven Accelerators: Working Group Summary

    International Nuclear Information System (INIS)

    Muggli, P.; Southern California U.; Ng, J.S.T.; SLAC

    2005-01-01

    The working group has identified the parameters of an afterburner based on the design of a future linear collider. The new design brings the center of mass energy of the collider from 1 to 2 TeV. The afterburner is located in the final focus section of the collider, operates at a gradient of ∼4 GeV/m, and is only about 125 m long. Very important issues remain to be addressed, and include the physics and design of the positron side of the afterburner, as well as of the final focus system. Present plasma wakefield accelerator experiments have reached a level of maturity and of relevance to the afterburner, that make it timely to involve the high energy physics and accelerator community in the afterburner design process. The main result of this working group is the first integration of the designs of a future linear collider and an afterburner

  11. Overview of the EMRAS biota dosimetry working group

    International Nuclear Information System (INIS)

    Kawaguchi, Isao; Doi, Masahiro

    2008-01-01

    Current principle of radiation protection systems is protection of human, because the human is assumed as the most sensitive organism. Protection framework of human is also believed to be effective for protection of non-human species. On the other hand, it is recently attracting the international interests how sustainability of the ecological services is influenced by environmental disturbances such as chemicals and radiation. Therefore, international concern about protection framework of nonhuman biota has arisen. By the international concern, European and American countries were respectively developed models to evaluate effects of radiation to biota. However, the models are based on their own assumptions, so that the international validity has not been confirmed. Therefore, in IAEA, biota dosimetry working group (BWG) was established in Environmental Modeling for Radiation Safety (EMRAS) program, which aimed to intercompare the models to validate their assumptions and estimations. This paper reports summary of the activity in EMRAS biota dosimetry working group. (author)

  12. Managing a work-life balance: the experiences of midwives working in a group practice setting.

    Science.gov (United States)

    Fereday, Jennifer; Oster, Candice

    2010-06-01

    To explore how a group of midwives achieved a work-life balance working within a caseload model of care with flexible work hours and on-call work. in-depth interviews were conducted and the data were analysed using a data-driven thematic analysis technique. Children, Youth and Women's Health Service (CYWHS) (previously Women's and Children's Hospital), Adelaide, where a midwifery service known as Midwifery Group Practice (MGP) offers a caseload model of care to women within a midwife-managed unit. 17 midwives who were currently working, or had previously worked, in MGP. analysis of the midwives' individual experiences provided insight into how midwives managed the flexible hours and on-call work to achieve a sustainable work-life balance within a caseload model of care. it is important for midwives working in MGP to actively manage the flexibility of their role with time on call. Organisational, team and individual structure influenced how flexibility of hours was managed; however, a period of adjustment was required to achieve this balance. the study findings offer a description of effective, sustainable strategies to manage flexible hours and on-call work that may assist other midwives working in a similar role or considering this type of work setting. Copyright 2008 Elsevier Ltd. All rights reserved.

  13. Report of the Quark Flavor Physics Working Group

    CERN Document Server

    Butler, J N; Ritchie, J L; Cirigliano, V; Kettell, S; Briere, R; Petrov, A A; Schwartz, A; Skwarnicki, T; Zupan, J; Christ, N; Sharpe, S R; Van de Water, R S; Altmannshofer, W; Arkani-Hamed, N; Artuso, M; Asner, D M; Bernard, C; Bevan, A J; Blanke, M; Bonvicini, G; Browder, T E; Bryman, D A; Campana, P; Cenci, R; Cline, D; Comfort, J; Cronin-Hennessy, D; Datta, A; Dobbs, S; Duraisamy, M; El-Khadra, A X; Fast, J E; Forty, R; Flood, K T; Gershon, T; Grossman, Y; Hamilton, B; Hill, C T; Hill, R J; Hitlin, D G; Jaffe, D E; Jawahery, A; Jessop, C P; Kagan, A L; Kaplan, D M; Kohl, M; Krizan, P; Kronfeld, A S; Lee, K; Littenberg, L S; MacFarlane, D B; Mackenzie, P B; Meadows, B T; Olsen, J; Papucci, M; Parsa, Z; Paz, G; Perez, G; Piilonen, L E; Pitts, K; Purohit, M V; Quinn, B; Ratcliff, B N; Roberts, D A; Rosner, J L; Rubin, P; Seeman, J; Seth, K K; Schmidt, B; Schopper, A; Sokoloff, M D; Soni, A; Stenson, K; Stone, S; Sundrum, R; Tschirhart, R; Vainshtein, A; Wah, Y W; Wilkinson, G; Wise, M B; Worcester, E; Xu, J; Yamanaka, T

    2013-01-01

    This report represents the response of the Intensity Frontier Quark Flavor Physics Working Group to the Snowmass charge. We summarize the current status of quark flavor physics and identify many exciting future opportunities for studying the properties of strange, charm, and bottom quarks. The ability of these studies to reveal the effects of new physics at high mass scales make them an essential ingredient in a well-balanced experimental particle physics program.

  14. Using collaborative work groups to reduce O ampersand M costs

    International Nuclear Information System (INIS)

    Francoeur, R.; Jones, J.N.

    1995-01-01

    Commonwealth Edison Company (ComEd) entered the nineties burdened with external distractions from its core business of power generation. Its unresolved 1987 rate case continued to face intervention in the courts. Some of its largest industrial and municipal customers were exploring more economical alternatives. The new convention facility in Chicago actually engaged an independent energy supplier. Retail wheeling was the hot topic, and internal problems were present. Operations and Maintenance (O ampersand M) costs were steadily increasing. Two of their six nuclear stations were on the Nuclear Regulatory Commission's Watch List. Immediate changes had to occur if ComEd was to ensure its future competitiveness. At ComEd Braidwood Nuclear Power Station some untraditional work methodologies were embarked upon to help the parent company reduce its O ampersand M costs. Various types of collaborative work groups were formed, and have succeeded in lowering O ampersand M costs through shorter refueling outages and the use of fewer contracted personnel. These collaborative work groups are listed below and are described in detail in the remainder of this paper: (1) A core group of Maintenance Modification Contractor (MMC) supervision integrated into the Owner's Maintenance Staff, (2) A Corporate Outage Support Group of supervisory personnel which supplements the site's Maintenance Staff, (3) The Integrated Outage and Turbine Overhaul Contractor using a mixture of its own and Maintenance Staff supervisory personnel during outages with the Owner supplementing craft support using a third-party, (4) Six nuclear stations sharing key MMC personnel to insure experienced individuals are used effectively, and (5) Composite teams of maintenance personnel working across defined disciplines Braidwood Station has capitalized on the strategy of positive collaboration to become one of the lowest cost producers of nuclear power. Its use has enabled the Station to successfully complete the

  15. The Exclusive Group - Expatriates Working against Corporate Goals

    DEFF Research Database (Denmark)

    Lauring, Jakob

    2004-01-01

    Theories on expatriation have proposed international transfer as a mean to develop management capabilities and internationalise organisational communication networks. It has been argued that such developments are highly dependent on a sustained continual cross-cultural communication between...... as destructive towards overall corporate aims to internationalise and develop managerial and organisational competencies. Specifically excluding behaviour and cultural boundary creation of the expatriate group hindered the necessary cross-cultural communication and thereby working against corporate strategy...... of development....

  16. Food Parenting Measurement Issues: Working Group Consensus Report

    OpenAIRE

    Hughes, Sheryl O.; Frankel, Leslie A.; Beltran, Alicia; Hodges, Eric; Hoerr, Sharon; Lumeng, Julie; Tovar, Alison; Kremers, Stef

    2013-01-01

    Childhood obesity is a growing problem. As more researchers become involved in the study of parenting influences on childhood obesity, there appears to be a lack of agreement regarding the most important parenting constructs of interest, definitions of those constructs, and measurement of those constructs in a consistent manner across studies. This article aims to summarize findings from a working group that convened specifically to discuss measurement issues related to parental influences on...

  17. Use of probabilistic safety assessment in the regulatory process. Report of the technical committee meeting. Working material

    International Nuclear Information System (INIS)

    1994-01-01

    A Technical Committee Meeting (TCM) was organized between 5-8 December 1994 to discuss and review the international situation in connection with the use made, whether formally or informally, by regulatory bodies of probabilistic safety assessment (PSA) in the course of their work, and the related question of the use and value of adopting probabilistic safety criteria (PSC) as an aid to judging the results of PSAs. The document includes the output from the four working groups, as well as 11 papers from the 12 papers presented to the TCM. A separate abstract was prepared for each paper. Refs, figs, tabs

  18. Technical skills requirement of Indonesian construction labors to work in Malaysia

    Science.gov (United States)

    Adi, Henny Pratiwi

    2017-03-01

    Labors skills is an important part of construction projects implementation. Suitability between the skills possessed by labors with the skills needed by user is required to increase employment opportunities. Malaysia is a country that using construction labors from Indonesia. This study aims to get the kind of technical skills required by users of Indonesian constructian labors in Malaysia and also the importance level of technical skills. Data collecting in this research was conducted through interviews and questionnaires on contractors in Malaysia. The next stage was determine the importance level of technical skills in work field of carpenter, bricklayer, plumber and painters. The importance level of technical skills analyzed using the Relative Importance Index (RII). The results showed that mastering the operation of both instruments either manually or electrically is the most importance in the technical skills. Therefore, an understanding of the types of equipment for work field and the manner of operation is need to had by Indonesian construction labors who will work in Malaysia.

  19. BUGS at work : a bicycle user group guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This guide provides practical advice to cyclists on how start a Bicycle User Group (BUG) at their workplace. It offers tools to encourage employers to be proactive in improving facilities in support of cycle commuting. Several BUGs across Canada have worked towards getting better bicycle parking, lockers and shower facilities at their workplace. Other incentives include policies such as flexible work hours for cyclist commuters; casual dress on Friday; reimbursement for the subsidized cost of free parking provided by employers; and, use of a company car if needed for company business during the work day. The advantages to employers include: reduced health care costs because cyclists are physically fit; decreased absenteeism; increased productivity; reduced parking costs; lower company transportation bills; and, a greener corporate image. BUGs provide cycling information ranging from cycling maps to pamphlets and they raise cycle awareness. This guide includes cycling survey samples and examples of successful BUG activities across Canada. refs., tabs., figs.

  20. Improving tsunami resiliency: California's Tsunami Policy Working Group

    Science.gov (United States)

    Real, Charles R.; Johnson, Laurie; Jones, Lucile M.; Ross, Stephanie L.; Kontar, Y.A.; Santiago-Fandiño, V.; Takahashi, T.

    2014-01-01

    California has established a Tsunami Policy Working Group to facilitate development of policy recommendations for tsunami hazard mitigation. The Tsunami Policy Working Group brings together government and industry specialists from diverse fields including tsunami, seismic, and flood hazards, local and regional planning, structural engineering, natural hazard policy, and coastal engineering. The group is acting on findings from two parallel efforts: The USGS SAFRR Tsunami Scenario project, a comprehensive impact analysis of a large credible tsunami originating from an M 9.1 earthquake in the Aleutian Islands Subduction Zone striking California’s coastline, and the State’s Tsunami Preparedness and Hazard Mitigation Program. The unique dual-track approach provides a comprehensive assessment of vulnerability and risk within which the policy group can identify gaps and issues in current tsunami hazard mitigation and risk reduction, make recommendations that will help eliminate these impediments, and provide advice that will assist development and implementation of effective tsunami hazard risk communication products to improve community resiliency.

  1. Danish Report: Work Stream 3: Fokus Group Interviews

    DEFF Research Database (Denmark)

    Siim, Birte; Larsen, Jeppe Fuglsang; Meret, Susi

    2014-01-01

    on – not only at the national level but especially beyond and below the nation state – at the transnational and local levels. It shows that some of the groups, for example Sabaah, offering counselling to homosexual youths with a Muslim background, work mainly on the local municipality level in Copenhagen. Other...... initiatives to combat hate speech hate crimes. The mapping of voluntary movements/groups/organizations presents an overview of the diverse policies and strategies towards racism, discrimination and hates speech and hate behavior. It looks at the kind of activities, campaigns and demonstrations...... the organizations have been engaged in demonstrating the close collaborations and negotiations/networking between the democratic anti-bodies as well as the struggles between antibodies and groups practicing hate speech and hate behavior. This identified important gaps in our knowledge about what is going...

  2. Working group report on water resources, supply and demand

    International Nuclear Information System (INIS)

    Marta, T.J.

    1990-01-01

    A summary is presented of the issues discussed, and the conclusions and recommendations of a working group on water resources, supply and demand. The issues were grouped into the categories of detecting climatic change and water impacts, simulating potential impacts, and responding to potential impacts. The workshop groups achieved consensus on the following points: the physics of global warming and climatic change have been satifactorily proven; there appears to be some evidence of climatic change and a signal could soon be detected; policy decisions and strategic plans for climatic change and its potential impacts are needed immediately; and targets and priorities for decison making should be identified and addressed immediately. Three top-priority issues are the identification of indicators for the detection of climatic change impacts on hydrology, determining response to climate-related change, and evaluation of design criteria. Better information on regional climate and hydrology under conditions of global warming is needed before design criteria could be altered

  3. Summary of the particle physics and technology working group

    International Nuclear Information System (INIS)

    Stephan Lammel et al. email = crathbun@fnal.gov

    2002-01-01

    Progress in particle physics has been tightly related to technological advances during the past half century. Progress in technologies has been driven in many cases by the needs of particle physics. Often, these advances have benefited fields beyond particle physics: other scientific fields, medicine, industrial development, and even found commercial applications. The particle physics and technology working group of Snowmass 2001 reviewed leading-edge technologies recently developed or in the need of development for particle physics. The group has identified key areas where technological advances are vital for progress in the field, areas of opportunities where particle physics may play a principle role in fostering progress, and areas where advances in other fields may directly benefit particle physics. The group has also surveyed the technologies specifically developed or enhanced by research in particle physics that benefit other fields and/or society at large

  4. AREVA Technical Days (ATD) session 1: Energy outlook and presentation of the Areva Group

    International Nuclear Information System (INIS)

    2002-01-01

    These technical days organized by the Areva Group aims to explain the group activities in a technological and economic point of view, to provide an outlook of worldwide energy trends and challenges and to present each of their businesses in a synthetic manner. This first session deals with energy challenges and nuclear, public acceptance of nuclear power, mining activities, chemistry activities, enrichment activities, fuel assembly, reactors and services activities, nuclear measurements activities, reprocessing and recycling activities, logistics activities and connectors activities. (A.L.B.)

  5. A socio-technical analysis of work with ideas in NPD: an industrial case study

    DEFF Research Database (Denmark)

    Gish, Liv; Hansen, Claus Thorp

    2013-01-01

    on piecing together a number of ideas that were developed and disseminated in a large industrial company. We do this through an in-depth case study of the development of the energy-labeled circulation pump Alpha Pro, developed by one of the world’s leading pump manufacturers, Grundfos. Using a socio-technical...... approach, we focus especially on the actors involved and the contextual factors, and less on the detailed development of technical ideas. In our study, we observe that (1) ideas are pieced together from previous ideas and results; (2) ideas are implemented through continuous mobilization of support...... and development of legitimate arguments; and (3) idea work is also a socio-technical process, because contextual factors matter. We observe that idea work is an ongoing process undertaken across different projects, actors, departments, strategies, and visions within Grundfos, while also involving external actors...

  6. COMPUTER-BASED SYSTEMS OF PHYSICAL EXPERIMENT IN INDEPENDENT WORK OF STUDENTS OF TECHNICAL UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Iryna Slipukhina

    2016-11-01

    Full Text Available Purpose: The self-study activity of students is an important form of educational process under the conditions of rapid changes of technologies. Ability and readiness of future engineers for independent education is one of their key competences. Investigation of modern methods of planning, organization and control of independent cognitive activity of students while studying physics as effective means of complex forming of their professional qualities is the object of the research. Methods: We analyse the curricula of some engineering specialities in leading technical universities, existent methods and forms of organization of students’ self-study, and own pedagogical experience. Results: Based on the theoretical analysis of existing methods of students’ self-study, it was found that a systematizing factor of appropriate educational technology is the problem focused cognitive tasks. They have to be implemented by application of the modern technological devices integrated with a computer-based experiment. We define the aim of individual or group laboratory works; the necessary theoretical and practical knowledge and skills of students are rationalized; timing and form of presentation of the results are clarified after individual and group consulting. The details of preparatory, searching-organizational, operational, and control stages in organization of students’ self-study with the use of computer oriented physical experiment are specified, these details differ depending on the didactic purpose, form of organization and students’ individuality. Discussion: The research theoretical aspect confirms the determining role of subject-subject cooperation in forming of competences of independent learning of the future engineers. Basic practical achievements of the research consist of improving methods of using of digital learning systems, creation of textbooks that promote consultative and guiding role for the educational process, working-out of

  7. Report of results and of research and development work at the Institute of Technical Physics 1991

    International Nuclear Information System (INIS)

    1992-03-01

    The central areas of work are superconductivity and its applications, cryo-technology and microwave technology. The main point of technical development is the construction of magnets for the nuclear fusion project NET/ITER. Basic investigations concern low temperature and superconductor materials such as YBa 2 Cu 3 O 7-x single crystals. (DG) [de

  8. 76 FR 21043 - Notice of Public Meeting: Technical Aspects of Mandatory Deposit of Published Electronic Works...

    Science.gov (United States)

    2011-04-14

    ... mandatory deposit requirements of the copyright law. The objective is to identify file submission, packaging... mandatory deposit provisions of the copyright law. Under the interim regulation, certain works available... LIBRARY OF CONGRESS Copyright Office [Docket No. 2011-3] Notice of Public Meeting: Technical...

  9. Academic & Technical Skills + Life/Work Skills + Career Information & Guidance = Success in Career Building.

    Science.gov (United States)

    Jarvis, Phillip S.

    There has been a renaissance in the thinking about career development. It is becoming accepted that information is not enough; in addition to academic and technical skills, youth and adults need to learn life/work designing and building skills to become healthy, productive, and self-reliant citizens. Despite the fact that Canadian students have…

  10. HEP Software Foundation Community White Paper Working Group - Detector Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Apostolakis, J; et al.

    2018-03-12

    A working group on detector simulation was formed as part of the high-energy physics (HEP) Software Foundation's initiative to prepare a Community White Paper that describes the main software challenges and opportunities to be faced in the HEP field over the next decade. The working group met over a period of several months in order to review the current status of the Full and Fast simulation applications of HEP experiments and the improvements that will need to be made in order to meet the goals of future HEP experimental programmes. The scope of the topics covered includes the main components of a HEP simulation application, such as MC truth handling, geometry modeling, particle propagation in materials and fields, physics modeling of the interactions of particles with matter, the treatment of pileup and other backgrounds, as well as signal processing and digitisation. The resulting work programme described in this document focuses on the need to improve both the software performance and the physics of detector simulation. The goals are to increase the accuracy of the physics models and expand their applicability to future physics programmes, while achieving large factors in computing performance gains consistent with projections on available computing resources.

  11. Report of the Working Group on Far Field Accelerators

    International Nuclear Information System (INIS)

    Cha-Mei Tang

    1992-01-01

    This report describes the accomplishments of the Working Group on Far Field Accelerators. In addition to hearing presentations of current research, the group produced designs for ''100 MeV'' demonstration accelerators, ''1 GeV'' conceptual accelerators and a small electron beam source. Two of the ''100 MeV'' designs, an Inverse Free Electron Laser (IFEL) and an Inverse Cerenkov Accelerator (ICA), use the CO 2 laser and the 50 MeV linac at the Advanced Test Facility (ATF) at Brookhaven National Laboratory (BNL), requiring only modest changes in the current experimental setups. By upgrading the laser, an ICA design demonstrated 1 GeV acceleration in a gas cell about 50 cm in length. For high average power accelerators, examples based on the IFEL concept were also produced utilizing accelerators driven by high average power FELs. The Working Group also designed a small electron beam source based on the inverse electron cyclotron resonance concept. Accelerators based on the IFEL and ICA may be the first to achieve ''100 MeV'' and ''1 GeV'' energy gain demonstration with high accelerating gradients

  12. Report of the working group for nuclear damage compensation system

    International Nuclear Information System (INIS)

    1989-01-01

    The Working Group for Nuclear Damage Compensation System was established within the Atomic Energy Commision of Japan on August 2, 1988. The Group has held five meetings to make a study on the revision of the reserve for nuclear damage compensation. The nuclear damage compensation system in Japan has been established under the Law Concerning Compensation for Nuclear Damages and the Law Concerning Contract for Compensation for Nuclear Damages. The former law requires the nuclear power plant operators to set up a reserve for damage compensation to ensure positive and quick payment of compensation in the event of an accident. The reserve is currently rely on liability insurance and a government compensation contract. The Working Group has concluded that the total reserve should be increased from the current yen10 bill. to yen30 bill. The amount of the reserve specified in the enforcement law for the Law Concerning Compensation for Nuclear Damages should also be increased accordingly. The Law Concerning compensation for Nuclear damage will also be applied to damage which occurs overseas as a result of an accident in Japan. (N.K.)

  13. Digitization as a Method of Preservation? Final Report of a Working Group of the Deutsche Forschungsgemeinschaft (German Research Association).

    Science.gov (United States)

    Weber, Hartmut; Dorr, Marianne

    The German Research Association (DFG) is actively involved in preservation of research materials; it takes the view that in preservation, the enormous potential of digitization for access should be combined with the stability of microfilm for long-term storage. A working group was convened to investigate the technical state of digitization of…

  14. The Web as process tool and product environment for group-based project work in higher education

    NARCIS (Netherlands)

    Collis, Betty; Andernach, Toine; van Diepen, N.M.; Maurer, Hermann

    1996-01-01

    This paper discusses problems confronting the use of group-based project work as an instructional strategy in higher education, and describes two technical courses (i.e., courses in online learning and applications of business information technology) at the University of Twente (Netherlands) in

  15. Canadian space agency discipline working group for space dosimetry and radiation science

    International Nuclear Information System (INIS)

    Waker, Anthony; Waller, Edward; Lewis, Brent; Bennett, Leslie; Conroy, Thomas

    2008-01-01

    Full text: One of the great technical challenges in the human and robotic exploration of space is the deleterious effect of radiation on humans and physical systems. The magnitude of this challenge is broadly understood in terms of the sources of radiation, however, a great deal remains to be done in the development of instrumentation, suitable for the space environment, which can provide real-time monitoring of the complex radiation fields encountered in space and a quantitative measure of potential biological risk. In order to meet these research requirements collaboration is needed between experimental nuclear instrumentation scientists, theoretical scientists working on numerical modeling techniques and radiation biologists. Under the auspices of the Canadian Space Agency such a collaborative body has been established as one of a number of Discipline Working Groups. Members of the Space Dosimetry and Radiation Science working group form a collaborative network across Canada including universities, government laboratories and the industrial sector. Three central activities form the core of the Space Dosimetry and Radiation Science DWG. An instrument sub-group is engaged in the development of instruments capable of gamma ray, energetic charged particle and neutron dosimetry including the ability to provide dosimetric information in real-time. A second sub-group is focused on computer modeling of space radiation fields in order to assess the performance of conceptual designs of detectors and dosimeters or the impact of radiation on cellular and sub-cellular biological targets and a third sub-group is engaged in the study of the biological effects of space radiation and the potential of biomarkers as a method of assessing radiation impact on humans. Many working group members are active in more than one sub-group facilitating communication throughout the whole network. A summary progress-report will be given of the activities of the Discipline Working Group and the

  16. Working group on unbundling of electricity trade operations 2. A group report

    International Nuclear Information System (INIS)

    2000-09-01

    The current unbundling of operations in accounts has proved inadequate. No formula or model that could be made binding by provisions have been defined for unbundled accounts. In addition, unbundling can draw a distinct line between commercial activities and network operations, which have assumed various authoritative functions. Against this background, the need for clearer unbundling has become more marked. The working group suggests that the current provisions on unbundling of trade operations should be tightened and that the unbundling should be made clearer especially in terms of allocation of joint costs. For this, the necessary preparations by the authorities should be initiated urgently. At the same time, the working group proposes that network operations should be unbundled from other operations by incorporation or by unbundling them into a separate public utility. The smallest electric utilities should be exempted from the obligation of incorporating network operations. According to the working group, the lower limit could be fixed e.g. at 70 GWh a year. The working group also suggests that the licensees must own the electricity networks they operate. The licensees could not rent their networks from the mother company nor lease them from a financing company. The model proposed by the working group would redress the major problems connected with the supervision of the electricity market. The monopoly, i.e. the electricity network operations, under the supervision of the Electricity Market Authority could thus be unbundled. This would improve the functioning of the market and facilitate the supervision. However, the model would not abolish the tax concession of municipal public utilities in competitive trade operations, production and sale of electricity. The tax concession may affect the competitive situation on the electricity market. (orig.)

  17. Working group report on hadrons in the nuclear medium

    Energy Technology Data Exchange (ETDEWEB)

    Ent, R. [CEBAF, Newport News, VA (United States); Milner, R.G. [Masachusetts Inst. of Technology, Cambridge, MA (United States)

    1994-04-01

    This working group focussed on the subject of hadrons in the nuclear medium. It encompassed both the understanding of the nucleus itself in terms of its binding and its structure, and the use of the nucleus as a medium to probe QCD and the structure of hadrons. Both aspects were addressed during the workshop, though the emphasis tended towards the latter. Almost inescapably this working group had some overlap with the other working groups, as the nucleus can also be used as a medium to probe the production and structure of vector mesons. Also, inclusive and semi-inclusive processes can be used as a probe of nuclear effects, for instance in the case of deep-inelastic scattering for x > 1. In this summary report the authors will try to restrict themselves to only those issues where the nuclear medium is important. To increase their understanding of the nucleus in terms of its binding and structure, they would like to know the effect of a dense nuclear medium on a nucleon, to know the non-nucleonic degrees of freedom needed to describe a nuclear system, and to understand the implications of the fact that a bound nucleon is necessarily off its mass-shell. The results of many lepton scattering experiments during the last two decades have raised these questions, but at this moment there are no definitive answers. The hope is that the well-known electron probe, with sufficient energy to probe the short-range properties of nuclei, can provide insight. Especially, the authors would like a conclusive answer to the question if, and to what extent, quark degrees of freedom are necessary to describe a nuclear system.

  18. Introducing the AAS Working Group on Astroinformatics and Astrostatistics

    Science.gov (United States)

    Ivezic, Zeljko

    2014-01-01

    In response to two White Papers submitted to the Astro2010 Decadal Survey (1,2), a new AAS Working Group on Astroinformatics and Astrostatistics (WGAA) has been approved by the AAS Council at the 220th Meeting, June 2012, in Anchorage. The motivation for this WG is the growing importance of the interface between astronomy and various branches of applied mathematics, computer science and the emerging field of data science. With the new data-intensive projects envisioned for the coming decade, the need for advice derived from the focused attention of a group of AAS members who work in these areas is bound to increase. The Working Group is charged with spreading awareness of rapidly advancing computational techniques, sophsticated statistical methods, and highly capble software to further the goals of astronomical and astrophysical research. The three main strategic goals adopted by the WGAA Steering Committee for the next few years are to: (i) develop, organize and maintain methodological resources (such as software tools, papers, books, and lectures); (ii) enhance human resources (such as foster the creation of career paths, establish a Speakers' Bureau, establish and maintain an archived discussion forum, enable periodic news distribution); and (iii) organize topical meetings. The WGAA Steering Committee at this time includes twelve members: Kirk Borne, George Djorgovski, Eric Feigelson, Eric Ford, Alyssa Goodman, Joe Hilbe, Zeljko Ivezic (chair), Ashish Mahabal, Aneta Siemiginowska, Alex Szalay, Rick White, and Padma Yanamandra-Fisher. I will summarize our accomplishments since July 2012. (1) Astroinformatics: A 21st Century Approach to Astronomy (Borne & 90 coauthors), (2) The Astronomical Information Sciences: A Keystone for 21st-Century Astronomy (Loredo & 72 coauthors)

  19. Working group report on hadrons in the nuclear medium

    International Nuclear Information System (INIS)

    Ent, R.; Milner, R.G.

    1994-01-01

    This working group focussed on the subject of hadrons in the nuclear medium. It encompassed both the understanding of the nucleus itself in terms of its binding and its structure, and the use of the nucleus as a medium to probe QCD and the structure of hadrons. Both aspects were addressed during the workshop, though the emphasis tended towards the latter. Almost inescapably this working group had some overlap with the other working groups, as the nucleus can also be used as a medium to probe the production and structure of vector mesons. Also, inclusive and semi-inclusive processes can be used as a probe of nuclear effects, for instance in the case of deep-inelastic scattering for x > 1. In this summary report the authors will try to restrict themselves to only those issues where the nuclear medium is important. To increase their understanding of the nucleus in terms of its binding and structure, they would like to know the effect of a dense nuclear medium on a nucleon, to know the non-nucleonic degrees of freedom needed to describe a nuclear system, and to understand the implications of the fact that a bound nucleon is necessarily off its mass-shell. The results of many lepton scattering experiments during the last two decades have raised these questions, but at this moment there are no definitive answers. The hope is that the well-known electron probe, with sufficient energy to probe the short-range properties of nuclei, can provide insight. Especially, the authors would like a conclusive answer to the question if, and to what extent, quark degrees of freedom are necessary to describe a nuclear system

  20. Tevatron-for-LHC Report of the QCD Working Group

    Energy Technology Data Exchange (ETDEWEB)

    Albrow, Michael G.; Begel, M.; Bourilkov, D.; Campanelli, M.; Chlebana, F.; De Roeck, A.; Dittmann, J.R.; Ellis, S.D.; Field, B.; Field, R.; Gallinaro, M.; /Fermilab

    2006-10-01

    The experiments at Run 2 of the Tevatron have each accumulated over 1 fb{sup -1} of high-transverse momentum data. Such a dataset allows for the first precision (i.e. comparisons between theory and experiment at the few percent level) tests of QCD at a hadron collider. While the Large Hadron Collider has been designed as a discovery machine, basic QCD analyses will still need to be performed to understand the working environment. The Tevatron-for-LHC workshop was conceived as a communication link to pass on the expertise of the Tevatron and to test new analysis ideas coming from the LHC community. The TeV4LHC QCD Working Group focused on important aspects of QCD at hadron colliders: jet definitions, extraction and use of Parton Distribution Functions, the underlying event, Monte Carlo tunes, and diffractive physics. This report summarizes some of the results achieved during this workshop.

  1. Division XII / Commission 41 / Working Group Historical Instruments

    Science.gov (United States)

    Pigatto, Luisa; Il-Seong, Nha; Hamel, Jürgen; Johnson, Kevin; Kochhar, Rajesh K.; Nakamura, Tsuko; Orchiston, Wayne; Pettersen, Bjørn R.; Schechner, Sara J.; Yunli, Shi

    The Historical Instruments Working Group (WG-HI) and Commission 41 started planning an interdisciplinary conference titled Astronomy and its instruments before and after Galileo since January 2007. This conference, as an IYA2009 initiative, aims “to highlight mankind's path toward an improved knowledge of the sky using mathematical and mechanical tools as well as monuments and buildings, giving rise, in doing so, to scientific astronomy”. Commission 46 and Commission 55 also support this conference, to be held on the Isle of San Servolo, Venice (Italy), 27 September 3 October 2009. As a fact of history, it was in Venice that Galileo was advised and got material (glass) to make his telescope, and in Venice he presented an working instrument to Venetian Doge in August 1609. The conference is co-sponsored by IAU as a Joint Symposium with the INAF Astronomical Observatory of Padova, Italy.

  2. The AAS Working Group on Accessibility and Disability (WGAD)

    Science.gov (United States)

    Monkiewicz, Jacqueline A.; Shanahan, J.; Murphy, Nicholas Arnold; Gilbert, Lauren

    2016-06-01

    The Working Group on Accessibility and Disability (WGAD) was formed by the Council of the American Astronomical Society in late 2015 in order to monitor and addresses issues of inclusivity in the astronomical community related to disability. WGAD promotes of the principles of universal accessibility and disability justice in both professional astronomy and astronomy education. The short term goals of WGAD for the next two years include producing a set of guidelines for a wide range of activities including supporting improved access to journals, data, and conferences. We will provide information and training regarding universal design as a guiding principle. The longer term goals of WGAD include integrating universal design as primary design strategy across the board in our many aspects of daily work life.

  3. Work group design in pharmacy: the pharmacist-technician team.

    Science.gov (United States)

    Kershaw, B P; Solomon, D K; Zarowitz, B J

    1987-05-01

    The contemporary pharmacy practice manager faces the challenge of designing pharmacy service programs that not only satisfy the needs of the patient, but at the same time satisfy and motivate the pharmacists and technicians who sustain the programs. This research examined the team design, which has been recommended but not fully described in the literature. This application did not explore the full potential of the team design in the hospital pharmacy setting. More study is needed in this area to assess the impact of work group design on the expansion of clinical programs, employee turnover rates, quality and quantity of work produced, and, most important, the impact on job satisfaction enjoyed by pharmacists and technicians.

  4. Summary of conclusions of the vacuum photodiode working group

    International Nuclear Information System (INIS)

    Willis, W.

    1988-01-01

    This report presents the design of a 30 MV gun. In considering the design of the vacuum photodiode switched to drive the accelerating field in the gun, we have paid attention to the work of the groups on high-voltage pulsing and on the design of the laser. We have found that we can trade off reduced laser power at the cost of a higher charging voltage for our one stage accelerator. We have presented the various parameter sets to the two groups and attempted to measure their enthusiasm for each set, and we have chosen the set that seems to provide an equal level of difficulty on both sides. 1 fig., 1 tab

  5. Summary of the working group on FEL theory

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrini, C.

    1984-01-01

    The working group on FEL theory dedicated most of its discussions to topics relevant to the high gain regime in a free electron laser. In addition the area of interest was mainly restricted to FELs for the production of XUV radiation (<1000 A). A list of the topics that were felt to be relevant is: (1) characterization of the FEL high gain regime; (2) the amplified spontaneous emission mode of operation (ASE); (3) superradiance in FELs; (4) diffraction effects for high gain FELs; (5) noise and start-up; (6) coherence properties of the radiation for the ASE and superradiant FELS. 9 references.

  6. Report of the Working Group on novel concepts and materials

    International Nuclear Information System (INIS)

    Crawford, R.K.; Brun, T.O.

    1997-09-01

    The working group meeting was chaired by Carpenter and Brun. This session was intended as a session to present ideas that had not yet been fully explored, as well as a place for discussion of topics that did not readily fit in any of the other workshop sessions. The first part of the session focused on moderator materials. During the course of the discussions of some novel potential moderator materials it became clear that there was not even agreement on what makes a good moderator for cold neutrons at short-pulse sources. There were two competing diametrically-opposed schools of thought.

  7. Summary of the working group on FEL theory

    International Nuclear Information System (INIS)

    Pellegrini, C.

    1984-01-01

    The working group on FEL theory dedicated most of its discussions to topics relevant to the high gain regime in a free electron laser. In addition the area of interest was mainly restricted to FELs for the production of XUV radiation (<1000 A). A list of the topics that were felt to be relevant is: (1) characterization of the FEL high gain regime; (2) the amplified spontaneous emission mode of operation (ASE); (3) superradiance in FELs; (4) diffraction effects for high gain FELs; (5) noise and start-up; (6) coherence properties of the radiation for the ASE and superradiant FELS. 9 references

  8. A User Guide to the ION Work Group Server

    CERN Document Server

    Miotto, A; CERN. Geneva; Jones, R W L; Dodgson, M; Miotto, A

    1999-01-01

    This guide describes the computing ressources available to the member of the ALICE collaboration. It includes a description of: the general services such as PLUS, SHIFT and CSF; the services such as the ION and NA49 WGS (Work Group Servers) dedicated to the members of ALICE and of the other heavy ion experiments at CERN; some Unix tools such as AFS, shells, HEPiX X11 environment, LSF etc; the access to magnetic tapes. This document is also available in pdf format.

  9. Report of the 1997 LEP2 working group on 'searches'

    International Nuclear Information System (INIS)

    Allanach, B.C.; Blair, G.A.; Diaz, M.A.

    1997-08-01

    A number of research program reports are presented from the LEP2 positron-electron collider in the area of searches for Higgs bosons, supersymmetry and supergravity. Working groups' reports cover prospective sensitivity of Higgs boson searches, radiative corrections to chargino production, charge and colour breaking minima in minimal Supersymmetric Standard Model, R-party violation effects upon unification predictions, searches for new pair-produced particles, single sneutrino production and searches related to effects similar to HERA experiments. The final section of the report summarizes the LEP 2 searches, concentrating on gians from running at 200 GeV and alternative paradigms for supersymmetric phenomenology. (UK)

  10. Summary Report of Working Group 1: Laser-Plasma Acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Geddes, C.G.R.; Clayton, C.; Lu, W.; Thomas, A.G.R.

    2010-06-01

    Advances in and physics of the acceleration of particles using underdense plasma structures driven by lasers were the topics of presentations and discussions in Working Group 1 of the 2010 Advanced Accelerator Concepts Workshop. Such accelerators have demonstrated gradients several orders beyond conventional machines, with quasi-monoenergetic beams at MeV-GeV energies, making them attractive candidates for next generation accelerators. Workshop discussions included advances in control over injection and laser propagation to further improve beam quality and stability, detailed diagnostics and physics models of the acceleration process, radiation generation as a source and diagnostic, and technological tools and upcoming facilities to extend the reach of laser-plasma accelerators.

  11. Summary Report of Working Group 1: Laser-Plasma Acceleration

    International Nuclear Information System (INIS)

    Geddes, C.G.R.; Clayton, C.; Lu, W.; Thomas, A.G.R.

    2010-01-01

    Advances in and physics of the acceleration of particles using underdense plasma structures driven by lasers were the topics of presentations and discussions in Working Group 1 of the 2010 Advanced Accelerator Concepts Workshop. Such accelerators have demonstrated gradients several orders beyond conventional machines, with quasi-monoenergetic beams at MeV-GeV energies, making them attractive candidates for next generation accelerators. Workshop discussions included advances in control over injection and laser propagation to further improve beam quality and stability, detailed diagnostics and physics models of the acceleration process, radiation generation as a source and diagnostic, and technological tools and upcoming facilities to extend the reach of laser-plasma accelerators.

  12. Report of the Working Group on Diffractive Phenomena

    International Nuclear Information System (INIS)

    Bartel, W.; Bartels, J.W.

    1994-01-01

    The discussions in the working group on diffractive processes were structured according to a scheme, in which first the experimental basis was specified followed by a presentation of theoretical papers and a general exchange of views on diffractive phenomena. Since diffraction is observed in many different channels, a common session was organised with participants from other working groups, in particular from the photoproduction and DIS community. A total of about 20 individual contributions were presented including those of the common discussion. Not all of them will be included in the proceedings. Some speakers had contributions to different sessions and submitted only one summary paper, others presented ideas for future analysis and are still working and others were too busy to finish the write up before the deadline. Diffractive phenomena observed at HERA were presented by T. Greenshaw of H1 and T. Docker from the ZEUS collaboration. The DO results on diffraction may be looked up in G. Forden's contribution to the proceedings. Further experimental results relevant to the topic ran be found in papers by M. Costa and S. Levonian issued in the photoproduction subsection. Experimentally it is not always easy to identify diffractive processes because pion and ordinary Regge exchange contributions are also present. This question is addressed in G. Levman's paper. New ideas to exploit a similarity between gluon - and Pomeron exchange were discussed by H. Kowalski, and G. Knies proposed a thrust analysis for diffractive events. In both cases work is going on which is not yet ready for a publication. (i. Ingelman reviewed existing Mt. Carlo programs on diffractive processes like POMPYT, RAPGAP and a program based on the Nikolaev - Zakharov approach to diffraction. These programs are well documented and need no further description in these proceedings. The same argument applies to V. Fadins talk, who reviewed published results on higher order corrections to the BFKL

  13. COSPAR/PRBEM international working group activities report

    Science.gov (United States)

    Bourdarie, S.; Blake, B.; Cao, J. B.; Friedel, R.; Miyoshi, Y.; Panasyuk, M.; Underwood, C.

    It is now clear to everybody that the current standard AE8 AP8 model for ionising particle specification in the radiation belts must be updated But such an objective is quite difficult to reach just as a reminder to develop AE8 AP8 model in the seventies was 10 persons full time for ten years It is clear that world-wide efforts must be combined because not any individual group has the human resource to perform these new models by themselves Under COSPAR umbrella an international group of expert well distributed around the world has been created to set up a common framework for everybody involved in this field Planned activities of the international group of experts are to - Define users needs - Provide guidelines for standard file format for ionising measurements - Set up guidelines to process in-situ data on a common basis - Decide in which form the new models will have to be - Centralise all progress done world-wide to advise the community - Try to organise world-wide activities as a project to ensure complementarities and more efficiencies between all efforts done Activities of this working group since its creation will be reported as well as future plans

  14. Student attitudes towards socially acceptable and unacceptable group working practices.

    Science.gov (United States)

    Underwood, Jean D M

    2003-08-01

    While there is much support for co-operative learning among learning theorists, not all learners exhibit the same enthusiasm for groupwork. A number of factors such as sex, group size and ability mix, subject domain, task type and organization have been shown to influence the effectiveness of co-operative and collaborative learning. This study established learners' attitudes to various shared working scenarios. In this mixed design, 140 post-graduate teacher trainees were asked to imagine their responses to seven groupwork scenarios presented as a series of short vignettes. The vignettes varied on the degree of co-operation required; the sex of the prospective co-worker(s) including single and mixed-sex groups; type of assessment, including no assessment at all; and on academically acceptable and unacceptable 'shared' working practices. Anticipated attitudinal and behavioural responses of the students were assessed by questionnaire. On the whole, students were cautiously willing to be involved in groupwork. There were caveats, however. Factors such as the characteristics of the group members, the level and type of assessment procedures in operation, and individual differences, including sex and self-reported social deviance, also governed their responses. There was very limited agreement to be involved in socially undesirable collaborative group activities at a personal level or to condone such activities by others. Those students who showed a tendency towards mild anti-social behaviour were more willing to take direct punitive action against non-contributors than their peers. Female students were more willing to invoke the help of the tutor than their male counterparts, but only if the anti-social behaviour impacted on them personally.

  15. Some considerations on the development of individual work plan for teachers of Technical and Vocational Education

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Gato Armas

    2010-03-01

    Full Text Available This article analyzes, from the optics of upgrading Technical and Professional Education chief staff in the province and professors in the Technical Sciences Faculty in the University of Pedagogical Sciencies “Rafael María of Mendive” in Pinar del Río, which can facilitate the elaboration of the plan for teachers’ individual work, so that it facilitates the assessment and performance of the planned activities, and at the same time, propitiating the professional development of the teachers, in each school term.

  16. New handling systems as technical support for the working process. Part 6. Feeding devices

    Energy Technology Data Exchange (ETDEWEB)

    Becher, H; Burkhardt, R; Drexel, P; Graf, B; Krreis, W

    1982-03-01

    Social, technical and economic reasons require an enhanced application of handling systems such as industrial robots. Quality and efficiency of an industrial robot depends greatly on feeding devices, and the ARGE-HHS within its project new handling systems as a technical aid in the working process intends to analyze all feeding devices that are likely to be most suitable for advanced applications. Forty one feeding devices were developed, known devices were modified, adapted to different applications, and tested. A variety of feeding devices for most applications in the field of material handling is reported.

  17. Report for the 2014 DCEE Working Group Meeting

    DEFF Research Database (Denmark)

    Jensen, Lotte Bjerregaard; Thompson, Mary Kathryn

    2014-01-01

    The DCEE 2014 meeting at the Technical University of Denmark focused on interdisciplinarity in design processes while embracing the central issues of the previous workshops: design tools / methods and design education in Civil and Environmental Engineering (CEE)....

  18. Working group 1B - basis for the standard-liquid pathway

    International Nuclear Information System (INIS)

    Budnitz, R.

    1993-01-01

    This paper presents a summary of the progress made by working group 1B (Basis for the Standard-Liquid Pathway) during the Electric Power Research Institute's EPRI Workshop on the technical basis of EPA HLW Disposal Criteria, March 1993. This group discussed the containment requirements of Environmental Protection Agency (EPA) standard 40 CFR Part 191. This is a major issue when considering the liquid pathway of contamination during the disposal of high-level radioactive wastes. Questions that were raised by this group were (1) What were the problems with Table 1 of 40 CFR Part 191?; (2) What would be fixed with the person-rem alternative that is offered?; and (3) What would be fixed if Table 1 were supplemented with additional columns for other pathways? Other topics that were touched on were the definition of the term open-quotes reasonable expectationsclose quotes and 100,000 year criteria

  19. Report of the CP-violation working group

    International Nuclear Information System (INIS)

    Hoffman, C.M.

    1982-01-01

    The CP-Violation Working Group met twice during the workshop. A nice summary of our present knowledge of CP-violation was presented in the talk by Prof. James W. Cronin. In the final paragraph of his talk, Prof. Cronin argues that higher precision experiments studying CP-violation at LAMPF II will be extremely important no matter what additional knowledge we acquire in the time before LAMPF II is constructed. The crucial issue at present is to uncover the underlying mechanism responsible for CP-violation. The Working Group heard several talks aimed at reviewing the theoretical status of CP-violation and the directions that future experimental efforts might take. These talks included: Kaon Experiments at KEK, T. Yamazaki, University of Tokyo; Mechanisms for CP Violation, P. Herczeg, Los Alamos; and The Experimental Status of eta 00 Experiments, J.W. Cronin, Univ. of Chicago. There were also extended discussions on which experiments appear to be the most important and how to best perform these measurements. A summary of these discussions is given

  20. Gender-heterogeneous working groups produce higher quality science.

    Directory of Open Access Journals (Sweden)

    Lesley G Campbell

    Full Text Available Here we present the first empirical evidence to support the hypothesis that a gender-heterogeneous problem-solving team generally produced journal articles perceived to be higher quality by peers than a team comprised of highly-performing individuals of the same gender. Although women were historically underrepresented as principal investigators of working groups, their frequency as PIs at the National Center for Ecological Analysis and Synthesis is now comparable to the national frequencies in biology and they are now equally qualified, in terms of their impact on the accumulation of ecological knowledge (as measured by the h-index. While women continue to be underrepresented as working group participants, peer-reviewed publications with gender-heterogeneous authorship teams received 34% more citations than publications produced by gender-uniform authorship teams. This suggests that peers citing these publications perceive publications that also happen to have gender-heterogeneous authorship teams as higher quality than publications with gender uniform authorship teams. Promoting diversity not only promotes representation and fairness but may lead to higher quality science.

  1. Gender-heterogeneous working groups produce higher quality science.

    Science.gov (United States)

    Campbell, Lesley G; Mehtani, Siya; Dozier, Mary E; Rinehart, Janice

    2013-01-01

    Here we present the first empirical evidence to support the hypothesis that a gender-heterogeneous problem-solving team generally produced journal articles perceived to be higher quality by peers than a team comprised of highly-performing individuals of the same gender. Although women were historically underrepresented as principal investigators of working groups, their frequency as PIs at the National Center for Ecological Analysis and Synthesis is now comparable to the national frequencies in biology and they are now equally qualified, in terms of their impact on the accumulation of ecological knowledge (as measured by the h-index). While women continue to be underrepresented as working group participants, peer-reviewed publications with gender-heterogeneous authorship teams received 34% more citations than publications produced by gender-uniform authorship teams. This suggests that peers citing these publications perceive publications that also happen to have gender-heterogeneous authorship teams as higher quality than publications with gender uniform authorship teams. Promoting diversity not only promotes representation and fairness but may lead to higher quality science.

  2. Summary for working group B on long-term stability

    International Nuclear Information System (INIS)

    Peggs, S.G.

    1992-01-01

    A total of 36 workshop participants attended at least one session of the Long-Term Stability working group. We avoided turning these sessions into a specialized seminar series by meeting in two subgroups, loosely labeled Analysis and Diffusion ampersand Tracking, so that working discussions among a reasonably small number of people were possible. Nonetheless, no attempt is made to categorize the 13 group B papers according to original subgroup. A similar workshop, the Workshop on Accelerator Orbit and Particle Tracking Problems, was held almost exactly 10 years ago at Brookhaven. It is interesting to see how many of the participants in the photograph of that workshop appear again in the photograph at the front of these proceedings. Fortunately, it is not correct to infer that little progress has been made in the last decade, nor that the average age of the participants has increased significantly. Rather, the recent photograph has many more, younger, faces than its predecessor. This attests to the ongoing interest and vigorous activity in an area of central importance to accelerator physics

  3. Reports from the working group on neutron scattering

    International Nuclear Information System (INIS)

    1979-06-01

    The present report contains papers dating from July 1978 until May 1979. During this period the experimental facilities have been expanded; a new four-circuit neutron spectrometer was installed and, together with the Fritz Hafer Institute, a measuring point was set up for investigations of ideal crystals, the Compton scattering equipment has been essentially improved. The report contains a contribution on the mechanics and the control of the neutron diffractometers existing at BER II. The main subjects of the scientific research work were magnetic structures and phase transitions, electron densities and chemical bonds, structure and dynamics of molecular crystals. At the BER II reactor measuring opportunities could be offered to a number of guest groups. Their research activities are reported, too. In addition to those made at the Berlin reactor BER II measurements could be made at the accelerator VICKSI of the Hahn-Meitner Institute and at the reactors of the Institute Laue-Langevin at Grenoble and of the Research Establishment at Riso by the working groups. (orig.) [de

  4. Chemical Safety Vulnerability Working Group report. Volume 3

    International Nuclear Information System (INIS)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 3 consists of eleven appendices containing the following: Field verification reports for Idaho National Engineering Lab., Rocky Flats Plant, Brookhaven National Lab., Los Alamos National Lab., and Sandia National Laboratories (NM); Mini-visits to small DOE sites; Working Group meeting, June 7--8, 1994; Commendable practices; Related chemical safety initiatives at DOE; Regulatory framework and industry initiatives related to chemical safety; and Chemical inventory data from field self-evaluation reports

  5. Chemical Safety Vulnerability Working Group report. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 3 consists of eleven appendices containing the following: Field verification reports for Idaho National Engineering Lab., Rocky Flats Plant, Brookhaven National Lab., Los Alamos National Lab., and Sandia National Laboratories (NM); Mini-visits to small DOE sites; Working Group meeting, June 7--8, 1994; Commendable practices; Related chemical safety initiatives at DOE; Regulatory framework and industry initiatives related to chemical safety; and Chemical inventory data from field self-evaluation reports.

  6. The Powell Volcano Remote Sensing Working Group Overview

    Science.gov (United States)

    Reath, K.; Pritchard, M. E.; Poland, M. P.; Wessels, R. L.; Biggs, J.; Carn, S. A.; Griswold, J. P.; Ogburn, S. E.; Wright, R.; Lundgren, P.; Andrews, B. J.; Wauthier, C.; Lopez, T.; Vaughan, R. G.; Rumpf, M. E.; Webley, P. W.; Loughlin, S.; Meyer, F. J.; Pavolonis, M. J.

    2017-12-01

    Hazards from volcanic eruptions pose risks to the lives and livelihood of local populations, with potential global impacts to businesses, agriculture, and air travel. The 2015 Global Assessment of Risk report notes that 800 million people are estimated to live within 100 km of 1400 subaerial volcanoes identified as having eruption potential. However, only 55% of these volcanoes have any type of ground-based monitoring. The only methods currently available to monitor these unmonitored volcanoes are space-based systems that provide a global view. However, with the explosion of data techniques and sensors currently available, taking full advantage of these resources can be challenging. The USGS Powell Center Volcano Remote Sensing Working Group is working with many partners to optimize satellite resources for global detection of volcanic unrest and assessment of potential eruption hazards. In this presentation we will describe our efforts to: 1) work with space agencies to target acquisitions from the international constellation of satellites to collect the right types of data at volcanoes with forecasting potential; 2) collaborate with the scientific community to develop databases of remotely acquired observations of volcanic thermal, degassing, and deformation signals to facilitate change detection and assess how these changes are (or are not) related to eruption; and 3) improve usage of satellite observations by end users at volcano observatories that report to their respective governments. Currently, the group has developed time series plots for 48 Latin American volcanoes that incorporate variations in thermal, degassing, and deformation readings over time. These are compared against eruption timing and ground-based data provided by the Smithsonian Institute Global Volcanism Program. Distinct patterns in unrest and eruption are observed at different volcanoes, illustrating the difficulty in developing generalizations, but highlighting the power of remote sensing

  7. Effect of Age Group on Technical-Tactical Performance Profile of the Serve in Men's Volleyball.

    Science.gov (United States)

    García-de-Alcaraz, Antonio; Ortega, Enrique; Palao, José M

    2016-10-01

    The aim of this study was to analyze the technical-tactical performance profile of the serve for various age groups and categories of competition in men's volleyball. The sample comprised 13,262 serves performed by 986 players in 299 sets observed in various categories of competition (U-14, U-16, U-19, national senior, and international senior). An observational design was used. The variables studied were category of competition, type of execution, and serve performance. The results showed that for higher age groups (senior categories), there were significantly fewer jump serves and poorer serve performance, regardless of players' maturity and training development. The use of the jump serves increased the serve risk while attempting to hinder the organization of the opponent attack. This paper discusses the serve evolution and the implications on the training process at the different age groups in men's volleyball. © The Author(s) 2016.

  8. CERN Technical Training 2002: Learning for the LHC! CLEAN-2002: WORKING IN A CLEAN ROOM

    CERN Multimedia

    Davide Vitè

    2002-01-01

    CLEAN-2002 is a new, free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. If you are interested in CLEAN-2002, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training pages. The next session, in English, will be on 10 October (afternoon). Other sessions, in French and English, will be offered following demand: the first session in French will be organised in November. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  9. French experience with Uranium compounds: conclusions of medical working group

    International Nuclear Information System (INIS)

    Berard, P.; Mazeyrat, C.; Auriol, B.; Montegue, A.; Estrabaud, M.; Grappin, L.; Giraud, J.M.

    2002-01-01

    The authors who represent several organisations and industrial firms, present observations conducted for some thirty years in France, including routine monitoring or special measurements following contamination by uranium compounds. They propose recommendations for radio toxicological monitoring of workers exposed to industrial uranium compounds and they comment on urine and faecal collections in relation to specific exposures. Our working group, set up by the CEA Medical Adviser in 1975, consists of French specialists in uranium radio toxicology. Their role is to propose recommendations for the monitoring of working conditions and exposed workers. The different plants process chemically and metallurgically, and machine large quantities of uranium with various 235U enrichments. Radio toxicological monitoring of workers exposed to uranium compounds requires examinations prescribed according to the kind of product manipulated and the industrial risk of the workplace. The range of examinations that are useful for this kind of monitoring includes lung monitoring, urine analyses and faecal sampling. The authors present the frequency of the monitoring for routine or special conditions according to industrial exposure, time and duration of collection of excreta (urine and faeces), the necessity of a work break, precautions for preservation of the samples and the ways in interpreting excretion analysis according to natural food intakes

  10. Student-Identified Strengths and Challenges of Using Blackboard for Group Projects in a Social Work Course

    Directory of Open Access Journals (Sweden)

    Melissa B. Littlefield

    2002-05-01

    Full Text Available Blackboard (TM provides social work educators integrated online communication tools that they can employ to facilitate student learning through features such as e-mail, discussion forums, file exchange, virtual classroom, and links to online resources. This study describes students’ experiences using Blackboard (TM to support a group project assignment. The majority of students found it easy to use and useful for the project, and indicated that they would like to use it in other courses. In addition, students gained technical skills as a result of the group project. Students’ group project grades and final course grades were comparable to those in other sections of the same course taught by this investigator. The findings of this study suggest that online technology can be used to facilitate group assignments for MSW students. The benefits include increased efficiency of group functioning and increased accountability of group members. The challenges include technical problems and student resistance to using the technology.

  11. Digital Instrumentation and Control working group (DICWG) - MDEP DICWG Programme Plan 2012 2013

    International Nuclear Information System (INIS)

    2012-02-01

    The Multinational Design Evaluation Programme (MDEP) Digital Instrumentation and Controls Working Group (DICWG) was approved by MDEP's Policy Group in March 2008 and meets approximately 3 times a year. All MDEP members and the IAEA are invited to participate in this working group's activities. The DICWG's main objectives are as follows: - to document common positions in the DI and C safety systems design areas; - to harmonise and converge national codes, standards and regulatory requirements and practices in this area while recognising the sovereign rights and responsibilities of national regulators in carrying out their safety reviews of new reactor designs (see the DICWG programme plan for more details of the group's work). The DICWG interacts regularly with the following organisations: - IEC (International Electro-technical Commission) Subcommittee 45A, Instrumentation and Control of Nuclear Facilities; - IEEE (Institute of Electric and Electronics Engineers); - other organisations involved in the design of digital I and C safety systems for nuclear power plants. The DICWG reports its status to the MDEP Steering Technical Committee at the latter's thrice annual meetings. This document presents the 2012 and 2013 programme plan and its products: the Generic Common Position DICWG-02 on Software Tools; the Generic Common Position DICWG-03 on Verification and Validation throughout the Life Cycle of Safety Systems Using Digital Computers; the Generic Common Position DICWG-04 on Communication Independence; the Generic Common Position DICWG-05 on Treatment of Hardware Description Language (HDL) Programmed Devices for Use in Nuclear Safety Systems; the Generic Common Position DICWG-06 on Simplicity in Design; the Generic Common Position DICWG-08 on Impact of Cyber Security Features on Digital I and C Safety Systems

  12. The mixed waste focus area mercury working group: an integrated approach for mercury treatment and disposal

    International Nuclear Information System (INIS)

    Conley, T.B.; Morris, M.I.; Holmes-Burns, H.; Petersell, J.; Schwendiman, L.

    1997-01-01

    In May 1996, the U.S. Department of Energy (DOE) Mixed Waste Focus Area (MWFA) initiated the Mercury Work Group (HgWG), which was established to address and resolve the issues associated with mercury- contaminated mixed wastes. Three of the first four technology deficiencies identified during the MWFA technical baseline development process were related to mercury amalgamation, stabilization, and separation/removal. The HgWG will assist the MWFA in soliciting, identifying, initiating, and managing all the efforts required to address these deficiencies. The focus of the HgWG is to better establish the mercury-related treatment needs at the DOE sites, refine the MWFA technical baseline as it relates to mercury treatment, and make recommendations to the MWFA on how to most effectively address these needs. The team will initially focus on the sites with the most mercury-contaminated mixed wastes, whose representatives comprise the HgWG. However, the group will also work with the sites with less inventory to maximize the effectiveness of these efforts in addressing the mercury- related needs throughout the entire complex

  13. Report of the first interim meeting of the Seabed Working Group Engineering Studies Task Group

    International Nuclear Information System (INIS)

    Talbert, D.M.

    1982-02-01

    The first interim meeting of the Engineering Studies Task Group (ESTG) was held at the Delft Soil Mechanics Laboratory, Delft, The Netherlands, on 21-24 September 1981. The main business of the meeting was the development of a network analysis for the ESTG. Significant progress was made; however, substantial further development remains to be accomplished. Other items discussed were (1) progress relevant to engineering studies made in the various national programs since the sixth annual meeting of the Seabed Working Group (SWG) held in Paris, February, 1981; (2) the ESTG Boundary Conditions and Scope of Work as previously defined at the Paris meeting; (3) the Draft II SWG Five-Year Plan; (4) the deep ocean drilling proposal made by the Site Selection Task Group at the Paris meeting and expanded upon at their May, 1981, meeting; and (5) a recent compilation of data from the Nares Abyssal Plain arising from the US Program studies. Finally, consideration was given to a plan for continued work by the ESTG. A brief discussion of the principal items is given. The current state of the network analysis is shown

  14. Chemical Safety Vulnerability Working Group report. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 1 contains the Executive summary; Introduction; Summary of vulnerabilities; Management systems weaknesses; Commendable practices; Summary of management response plan; Conclusions; and a Glossary of chemical terms.

  15. Working group report on energy, transportation and recreation

    International Nuclear Information System (INIS)

    Hengeveld, H.

    1991-01-01

    A working group was held to discuss the sensitivities of ecosystems and socio-economic activities relating to energy and recreation to climate change and variability, and the state and deficiencies of knowledge concerning these topics. It was concluded that the ecological integrity of national parks is at risk. Aggregate yields of fish in the Great Plains should improve with rising temperature, however extinction in southerly rivers is likely. Net reduction in hydro power generation appears probable due to decreased runoff and more frequent and severe drought. Total energy demand will be impacted by increased space cooling demands, up to 30% reduction in space heating demands, changing demands in agriculture for irrigation, water management and crop cultivation, and changing energy demands for road transport. Alternative strategies for displacement of fossil fuel use include low head hydro development, nuclear, wind energy, photovoltaics, ethanol from wood fibre, and hydrogen generated from surplus hydro power

  16. The Third Annual NASA Science Internet User Working Group Conference

    Science.gov (United States)

    Lev, Brian S. (Editor); Gary, J. Patrick (Editor)

    1993-01-01

    The NASA Science Internet (NSI) User Support Office (USO) sponsored the Third Annual NSI User Working Group (NSIUWG) Conference March 30 through April 3, 1992, in Greenbelt, MD. Approximately 130 NSI users attended to learn more about the NSI, hear from projects which use NSI, and receive updates about new networking technologies and services. This report contains material relevant to the conference; copies of the agenda, meeting summaries, presentations, and descriptions of exhibitors. Plenary sessions featured a variety of speakers, including NSI project management, scientists, and NSI user project managers whose projects and applications effectively use NSI, and notable citizens of the larger Internet community. The conference also included exhibits of advanced networking applications; tutorials on internetworking, computer security, and networking technologies; and user subgroup meetings on the future direction of the conference, networking, and user services and applications.

  17. Summary Report of Working Group 6: Laser-Plasma Acceleration

    International Nuclear Information System (INIS)

    Leemans, Wim P.; Downer, Michael; Siders, Craig

    2006-01-01

    A summary is given of presentations and discussions in the Laser-Plasma Acceleration Working Group at the 2006 Advanced Accelerator Concepts Workshop. Presentation highlights include: widespread observation of quasi-monoenergetic electrons; good agreement between measured and simulated beam properties; the first demonstration of laser-plasma acceleration up to 1 GeV; single-shot visualization of laser wakefield structure; new methods for measuring <100 fs electron bunches; and new methods for 'machining' laser-plasma accelerator structures. Discussion of future direction includes: developing a roadmap for laser-plasma acceleration beyond 1 GeV; a debate over injection and guiding; benchmarking simulations with improved wake diagnostics; petawatt laser technology for future laser-plasma accelerators

  18. Chemical Safety Vulnerability Working Group report. Volume 1

    International Nuclear Information System (INIS)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 1 contains the Executive summary; Introduction; Summary of vulnerabilities; Management systems weaknesses; Commendable practices; Summary of management response plan; Conclusions; and a Glossary of chemical terms

  19. National Working Group Meeting on ALK diagnostics in lung cancer.

    Science.gov (United States)

    Cooper, Wendy; Fox, Stephen; O'Toole, Sandra; Morey, Adrienne; Frances, Glenn; Pavlakis, Nick; O'Byrne, Kenneth; Dettrick, Andrew; Leong, Trishe; Rathi, Vivek; Spagnolo, Dominic; Hemmings, Chris; Singh, Mahendra; Moffat, David; Tsao, Ming-Sound; Wilner, Keith; Buller, Richard; Pitman Lowenthal, Susan; Arifeen, Shams; Binko, Justin; Alam, Mahmood

    2014-04-01

    The global landscape of molecular testing is rapidly changing, with the recent publication of the International Association for the Study of Lung Cancer (IASLC)/College of American Pathologists (CAP) guidelines and the ALK Atlas. The IASLC/CAP guidelines recommend that tumors from patients with non-small cell lung cancer (NSCLC) be tested for ALK rearrangements in addition to epidermal growth factor receptor (EGFR) mutations. The spur for this recommendation is the availability of novel therapies that target these rearrangements. This article is based on coverage of a Pfizer-sponsored National Working Group Meeting on ALK Diagnostics in Lung Cancer, held around the 15th World Lung Cancer Conference, in Sydney on October 31, 2013. It is based on the presentations given by the authors at the meeting and the discussion that ensued. The content for this article was discussed and agreed on by the authors. © 2014 Wiley Publishing Asia Pty Ltd.

  20. Technical meeting to 'Review of national programmes on fast reactors and accelerator driven systems (ADS)'. Working material

    International Nuclear Information System (INIS)

    2002-01-01

    The 35th Annual Meeting of the Technical Working Group on Fast Reactors TWG-FR, previously International Working Group on Fast Reactors (IWG-FR, created in 1967), was hosted by the Forschungszentrum Karlsruhe (FZK) and was attended by TWG-FR members and advisers from the following Member States: Brazil, China, France, Germany, India, Japan, the Republic of Kazakhstan, the Republic of Korea, the Russian Federation, and the United States of America. The objectives of the meeting were: to exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); to review the progress since the 34th TWG-FR Annual Meeting, including the status of the actions; to consider meeting arrangements for 2002 and 2003; to review the Agency's co-ordinated research activities in the field of FRs and ADS, as well as co-ordination of the TWG-FR's activities with other organizations

  1. Technical meeting to 'Review of national programmes on fast reactors and accelerator driven systems (ADS)'. Working material

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    The 35th Annual Meeting of the Technical Working Group on Fast Reactors TWG-FR, previously International Working Group on Fast Reactors (IWG-FR, created in 1967), was hosted by the Forschungszentrum Karlsruhe (FZK) and was attended by TWG-FR members and advisers from the following Member States: Brazil, China, France, Germany, India, Japan, the Republic of Kazakhstan, the Republic of Korea, the Russian Federation, and the United States of America. The objectives of the meeting were: to exchange information on the national programmes on Fast Reactors (FR) and Accelerator Driven Systems (ADS); to review the progress since the 34th TWG-FR Annual Meeting, including the status of the actions; to consider meeting arrangements for 2002 and 2003; to review the Agency's co-ordinated research activities in the field of FRs and ADS, as well as co-ordination of the TWG-FR's activities with other organizations.

  2. Technical evaluation of WIPP by the New Mexico environmental evaluation group

    International Nuclear Information System (INIS)

    Neill, R.

    1988-01-01

    The Waste Isolation Pilot Plant (WIPP) is a repository under construction in southeastern New Mexico for the disposal of 14.1 million curies of defense transuranic (TRU) waste. The US Department of Energy (DOE) plans to start storing waste in the underground facility in October 1988 for a 5-yr research and demonstration period. Since the State of New Mexico had a number of concerns in 1978 regarding the impact on health and safety of the proposed WIPP facility for disposal of radioactive waste, the DOE agreed to fund an independent technical review and evaluation of the planned repository, resulting in the creation of the Environmental Evaluation Group (EEG). This full-time multidisciplinary group has published 39 major reports to date, testified before the New Mexico Legislature and the US Congress, and has disseminated the results of analyses to DOE, the governor, the legislature, the Congress, the scientific community, and the general public. While the disposal of radioactive defense mill tailings and defense high-level wastes are both subject to US Nuclear Regulatory Commission (NRC) licensing, Congress specifically chose not to have defense TRU waste disposal licensed by the NRC. This has placed a heavy burden on EEG as the only full-time technical review agency on WIPP, but without regulatory authority

  3. Activities of the EMRAS Tritium/C14 Working Group

    International Nuclear Information System (INIS)

    Davis, P.A.; Balonov, M.; Venter, A.

    2005-01-01

    A new model evaluation program, Environmental Modeling for Radiation Safety (EMRAS), was initiated by the International Atomic Energy Agency in September 2003. EMRAS includes a working group (WG) on modeling tritium and C-14 transfer through the environment to biota and man. The main objective of this WG is to develop and test models of the uptake, formation and translocation of organically bound tritium (OBT) in food crops, animals and aquatic systems. To the extent possible, the WG is carrying out its work by comparing model predictions with experimental data to identify the modeling approaches and assumptions that lead to the best agreement between predictions and observations. Results for scenarios involving a chronically contaminated aquatic ecosystem and short-term exposure of soybeans are presently being analyzed. In addition, calculations for scenarios involving chronically contaminated terrestrial food chains and hypothetical short-term releases are currently underway, and a pinetree scenario is being developed. The preparation of datasets on tritium dynamics in large animals and fish is being encouraged, since these are the areas of greatest uncertainty in OBT modeling. These activities will be discussed in this paper

  4. Facilitation of the Estuary/Ocean Subgroup and the Expert Regional Technical Group, Annual Report for 2015

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Gary E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-08-01

    This document is the annual report for the period September 1, 2014 through August 31, 2015 for the project—Facilitation of the Estuary/Ocean Subgroup (EOS) and the Expert Regional Technical Group (ERTG). Pacific Northwest National Laboratory (PNNL) conducted the project for the Bonneville Power Administration (BPA). The EOS and ERTG are part of the research, monitoring, and evaluation (RME) and habitat restoration efforts, respectively, developed by the Action Agencies (BPA, U.S. Army Corps of Engineers [Corps or USACE], and U.S. Bureau of Reclamation) in response to obligations arising from the Endangered Species Act as a result of operation of the Federal Columbia River Power System (FCRPS) and implemented under the Columbia Estuary Ecosystem Restoration Program (CEERP). BPA/Corps (2015) explain the CEERP and the role of RME and the ERTG. For the purposes of this report, the lower Columbia River and estuary (LCRE) includes the floodplain from Bonneville Dam down through the lower river and estuary into the river’s plume in the ocean. The main purpose of this project is to facilitate EOS and ERTG meetings and work products. Other purposes are to provide technical support for CEERP adaptive management, CEERP restoration design challenges, and tributary RME. From 2002 through 2008, the EOS worked to design the federal RME program for the estuary/ocean (Johnson et al. 2008). From 2009 to the present day, EOS activities have involved RME implementation; however, EOS activities were minimal during the current reporting period. PNNL provided technical support to CEERP’s adaptive management process by convening 1.2 meetings of the Action Agencies (AAs) and drafting material for the “CEERP 2015 Restoration and Monitoring Plan” (BPA/Corps 2015).

  5. Report of the accelerator and beam line options working group

    International Nuclear Information System (INIS)

    Ankenbrandt, C.; Bogacz, A.; Bogert, D.; Bossert, R.C.; Brown, B.; Childress, S.; Crawford, C.; Dugan, G.; Even, L.; Finley, D.; Gelfand, N.; Gerig, R.; Goderre, G.; Gourlay, S.; Griffin, J.; Hahn, A.; Holmes, S.; Jackson, G.; Johnson, R.; Johnson, D.; Kerby, J.; Koepke, K.; Koizumi, G.; Koul, R.; Lamm, M.; MacLachlan, J.; Malamud, E.; Malensek, A.; Mantsch, P.; Marriner, J.; Marsh, B.; Martin, P.; Hills, F.; Moore, C.; Murphy, T.; Nicol, T.; Peterson, T.; Pruss, S.; Rameika, G.; Riddiford, A.; Rosenzweig, J.; Russell, A.; Saritepe, S.; Stahl, S.; Strait, J.; Trbojevic, D.; Visnjic, V.; Volk, J.; Johnson, D.; Syphers, M.; Mohl, D.; Ruggiero, S.; Collins, T.

    1990-01-01

    This report summarizes work done before, during, and after the conference. The group was broken down into six subgroups. Subgroup 1 considered collider aspects of the phase 1 and phase 2 upgrade plans. Also considered were the collider aspects of a specific example of Phase 3, namely the replacement of the Tevatron with a new ring providing 1.8 TeV per beam. Subgroup 2 considered specific improvements to the proposed Main Injector (MI) which will enhance the performance of Phase 2. Also considered were improvements which may be made to the present Main Ring (MR) which will enchance performance of Phase 1. Subgroup 3 considered fixed target aspects of the Phase 1 and 2 upgrade plans and a specific example of Phase 3, namely the replacement of the Tevatron with a new ring providing 1.5 TeV fixed target operation. Subgroup 4 considered the external beam lines associated with the upgrades. Subgroup 5 considered the new designs of the superconducting magnets and associated large cryogenic systems connected with the accelerator systems proposed by the other groups. Subgroup 6 assumed the existence of Phase 1 and 2 upgrades and considered new possibilities for Phase 3 such as new accelerators in new tunnels

  6. Bullying in work groups: the impact of leadership.

    Science.gov (United States)

    Nielsen, Morten Birkeland

    2013-04-01

    The aim of this study is to examine whether and how laissez-faire, transformational, and authentic leadership styles are related to the occurrence of bullying in work groups. It is hypothesized that the investigated leadership styles have direct associations, as well as indirect associations through group cohesion and safety perceptions, with indicators of bullying among subordinates. Using a cross-sectional survey design, the variables were assessed in a randomly selected sample comprising 594 seafarers from two Norwegian shipping companies. Laissez-faire leadership was associated with an increased risk of exposure to bullying behavior, self-labeled victimization from bullying, and perpetrated bullying. Transformational leadership and authentic leadership were related to decreased risk of exposure to bullying behavior. Authentic leadership contributed to the variance in bullying beyond laissez-faire and transformational leadership. Analyses of indirect effects showed that the association between transformational leadership and bullying was fully mediated through safety perceptions, whereas a partial indirect association through safety perceptions was found for authentic leadership. This study makes a significant contribution to the literature by providing evidence for how leadership styles predict workplace bullying. The findings highlight the importance of recruiting, developing, and training leaders who promote both positive psychological capacities and positive perceptions among their subordinates. © 2012 The Author. Scandinavian Journal of Psychology © 2012 The Scandinavian Psychological Associations.

  7. Report of the fixed target heavy quark working group

    International Nuclear Information System (INIS)

    Appel, J.A.; Butler, J.N.; Christian, D.; Cooper, P.; Errede, D.; Garbincius, P.; Gourlay, S.; Guttierez, G.; James, C.; Kasper, P.; Kreymer, A.; Lach, J.; Murphy, T.; Rameika, G.; Speigel, L.; Summers, D.; Berger, E.; Bigi, I.; Busenitz, J.; Cox, B.; Cumalat, J.; Dunlea, J.; Thorndike, E.; Escobar, C.; Gouffon, P.; Kapoor, V.; Kaplan, D.M.; Knapp, B.; Wiencke, L.; Judd, D.; Wagonner, D.; Newsom, C.; Pedrini, D.; Potter, D.; Russ, J.; Purohit, M.; Selove, W.; Van Berg, R.; Shepard, P.; Yager, P.

    1989-01-01

    The status of Fixed Target experiments to study charm and bottom is reviewed. The physics motivation for further high statistics studies of charm and bottom is presented. The technical challenges which will be encountered in doing very high sensitivity studies are described, some possible solutions are offered, and areas where additional research and development are required and identified. 38 refs., 8 figs., 9 tabs

  8. The QCD/SM Working Group: Summary Report

    International Nuclear Information System (INIS)

    Dobbs, M.

    2004-01-01

    Among the many physics processes at TeV hadron colliders, we look most eagerly for those that display signs of the Higgs boson or of new physics. We do so however amid an abundance of processes that proceed via Standard Model (SM) and in particular Quantum Chromodynamics (QCD) interactions, and that are interesting in their own right. Good knowledge of these processes is required to help us distinguish the new from the known. Their theoretical and experimental study teaches us at the same time more about QCD/SM dynamics, and thereby enables us to further improve such distinctions. This is important because it is becoming increasingly clear that the success of finding and exploring Higgs boson physics or other New Physics at the Tevatron and LHC will depend significantly on precise understanding of QCD/SM effects for many observables. To improve predictions and deepen the study of QCD/SM signals and backgrounds was therefore the ambition for our QCD/SM working group at this Les Houches workshop. Members of the working group made significant progress towards this on a number of fronts. A variety of tools were further developed, from methods to perform higher order perturbative calculations or various types of resummation, to improvements in the modeling of underlying events and parton showers. Furthermore, various precise studies of important specific processes were conducted. A significant part of the activities in Les Houches revolved around Monte Carlo simulation of collision events. A number of contributions in this report reflect the progress made in this area. At present a large number of Monte Carlo programs exist, each written with a different purpose and employing different techniques. Discussions in Les Houches revealed the need for an accessible primer on Monte Carlo programs, featuring a listing of various codes, each with a short description, but also providing a low-level explanation of the underlying methods. This primer has now been compiled and a

  9. Facilitating computer supported cooperative work with socio-technical self-descriptions

    OpenAIRE

    Kunau, Gabriele

    2006-01-01

    How can the concept of self-description from newer systems theory be used for improving the co-evolvement of software engineering and organizational change in CSCW-projects? This thesis suggests transferring the concept of self-description into a concept of socio-technical self-description allowing an organization to describe its own computer supported work processes. The presentation of results is organized in four steps: First, a theoretical foundation is elaborated; second, an initial meth...

  10. Chairmanship of the Neptune/Pluto outer planets science working group

    Science.gov (United States)

    Stern, S. Alan

    1993-11-01

    The Outer Planets Science Working Group (OPSWG) is the NASA Solar System Exploration Division (SSED) scientific steering committee for the Outer Solar System missions. OPSWG consists of 19 members and is chaired by Dr. S. Alan Stern. This proposal summarizes the FY93 activities of OPSWG, describes a set of objectives for OPSWG in FY94, and outlines the SWG's activities for FY95. As chair of OPSWG, Dr. Stern will be responsible for: organizing priorities, setting agendas, conducting meetings of the Outer Planets SWG; reporting the results of OPSWG's work to SSED; supporting those activities relating to OPSWG work, such as briefings to the SSES, COMPLEX, and OSS; supporting the JPL/SAIC Pluto study team; and other tasks requested by SSED. As the Scientific Working Group (SWG) for Jupiter and the planets beyond, OPSWG is the SSED SWG chartered to study and develop mission plans for all missions to the giant planets, Pluto, and other distant objects in the remote outer solar system. In that role, OPSWG is responsible for: defining and prioritizing scientific objectives for missions to these bodies; defining and documenting the scientific goals and rationale behind such missions; defining and prioritizing the datasets to be obtained in these missions; defining and prioritizing measurement objectives for these missions; defining and documenting the scientific rationale for strawman instrument payloads; defining and prioritizing the scientific requirements for orbital tour and flyby encounter trajectories; defining cruise science opportunities plan; providing technical feedback to JPL and SSED on the scientific capabilities of engineering studies for these missions; providing documentation to SSED concerning the scientific goals, objectives, and rationale for the mission; interfacing with other SSED and OSS committees at the request of SSED's Director or those committee chairs; providing input to SSED concerning the structure and content of the Announcement of Opportunity

  11. Assessment of the strategy countermeasures by the French farming working group

    International Nuclear Information System (INIS)

    Cessac, B.; Reales, N.; Gallay, F.

    2004-01-01

    In France, for several years, the Institute for Radiological Protection and Nuclear Safety (IRSN) has been working on technical solutions for the rehabilitation of rural, urban and industrial areas, contaminated by radioactivity. Then, the complexity of the radioactivity integration' s mechanisms into the environment and into the food chain, but also the important number of concerned actors and the inevitable incompatibilities between their respective expectations of the rehabilitation, make the post accidental management a challenging question for the responsible organisations at local, national and international levels. The involvement of persons in charge of agriculture in a collective reflection on the conditions and means of the post accidental situation's management seemed therefore necessary, in order to allow them to express the farmers point of view. On this basis, IRSN is deeply engaged in actions involving these other stakeholders, in particular in rural environment, in order to collect their appraisal and to obtain data and operational tools for the global evaluation of the countermeasures. The FARMING project, initiated in 2000 by the European Commission, constituted an interesting initiative in this direction. The French group has been constituted around the National Institute for Agronomy of Paris Grignon, which ensures its coordination. Within this framework, this group has notably been involved in the evaluation of a rural countermeasures compendium, at the request of STRATEGY, another European network on the post-accidental situation. With the support of a French farmers national association (FNSEA), the French FARMING group built up a working group composed of technical specialists of agriculture and radiation protection. All these actions facilitated the expression of the specific request for information, coming from the agricultural stakeholders, to the actors of radiation protection, and the design of new projects involving radiation

  12. Final report of the tritium issues working group. Vol. 1

    International Nuclear Information System (INIS)

    Spratt, Peter; Hardy, David; Peirce, Denny; Smith, Ron; Wyatt, Alan.

    1985-09-01

    Early in 1985 the proposed sale of the isotope 'tritium' by Ontario Hydro became a public issue. A number of community groups claimed in public forum that tritium recovered from Ontario Hydro's nuclear reactors would be sold or diverted to American thermonuclear (fusion) weapons. Their position was based on the following presumptions: that tritium was a major component in American nuclear weapons, that the United States has a supply problem with or shortage of this material, and that Ontario Hydro would directly or indirectly support the American nuclear weapons program: a) by providing tritium directly to the U.S. Department of Energy for use in nuclear weapons, or b) by supplying tritium to certain buyers - either traditional commercial facilities or the developing fusion research agencies associated with the Department of Energy, thus allowing or making possible the diversion of this isotope to nuclear weapons purposes, or c) by answering the needs of the commercial market, at present supplied from production reactors dedicated to supplying U.S. military requirements, indirectly allowing the U.S. government to concentrate its efforts on the production of tritium for nuclear weapons. When members of what has become known as the 'Tritium Issues Working Group' were first approached by Dr. T.S. Drolet in mid-April 1985, we were asked if we would agree to participate in a study to assess whether Canadian tritium, which is to be produced only for commercial and research purposes, could be inadvertantly utilized, either directly or indirectly, in the American nuclear weapons program. Our discussion of these issues is covered in Volume 1 of this report and is supplemented by appropriate Appendices in Volume 2. We could find absolutely nothing of a factual nature to justify the hypothesis that Canadian tritium would find its way into the American weapons program

  13. A survey-based cross-sectional study of doctors' expectations and experiences of non-technical skills for Out of Hours work.

    Science.gov (United States)

    Brown, Michael; Shaw, Dominick; Sharples, Sarah; Jeune, Ivan Le; Blakey, John

    2015-02-16

    The skill set required for junior doctors to work efficiently and safely Out of Hours (OoH) in hospitals has not been established. This is despite the OoH period representing 75% of the year and it being the time of highest mortality. We set out to explore the expectations of medical students and experiences of junior doctors of the non-technical skills needed to work OoH. Survey-based cross-sectional study informed by focus groups. Online survey with participants from five large teaching hospitals across the UK. 300 Medical Students and Doctors Participants ranked the importance of non-technical skills, as identified by literature review and focus groups, needed for OoH care. The focus groups revealed a total of eight non-technical skills deemed to be important. In the survey 'Task Prioritisation' (mean rank 1.617) was consistently identified as the most important non-technical skill. Stage of training affected the ranking of skills, with significant differences for 'Communication with Senior Doctors', 'Dealing with Clinical Isolation', 'Task Prioritisation' and 'Communication with Patients'. Importantly, there was a significant discrepancy between the medical student expectations and experiences of doctors undertaking work. Our findings suggest that medical staff particularly value task prioritisation skills; however, these are not routinely taught in medical schools. The discrepancy between expectations of students and experience of doctors reinforces the idea that there is a gap in training. Doctors of different grades place different importance on specific non-technical skills with implications for postgraduate training. There is a pressing need for medical schools and deaneries to review non-technical training to include more than communication skills. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  14. The Impact of Instructor's Group Management Strategies on Students' Attitudes to Group Work and Generic Skill Development

    Science.gov (United States)

    Natoli, Riccardo; Jackling, Beverley; Seelanatha, Lalith

    2014-01-01

    This paper examines the influence of two distinct group work management strategies on finance students' attitudes towards group work and their perceptions of generic skill development. Using quantitative and qualitative data, comparisons are made between students who experienced a supportive group work environment and students who experienced an…

  15. Direction of the methodological work in the Technical and Professional Education: the department bosses' preparation

    Directory of Open Access Journals (Sweden)

    Rolando Rodríguez Delgado

    2017-09-01

    Full Text Available The present work deals with the process of preparation of the heads of teaching departments for the direction of methodological work in Technical and Professional Education with the purpose of improving their professional performance with the collective of teachers and specialists in the continuous training of the worker. The results of the diagnosis made on this process revealed shortcomings because it is unsystematic and poorly contextualized, which does not allow to achieve a positive impact on the training of subordinates and students to join the world of work. For the development of the work we used the structural systemic methods, analysis and synthesis, induction and deduction, survey, interview, observation and statistical techniques such as percentage calculation, tables of frequencies and contingencies, which allowed to deepen the object of study and to elaborate a strategy of preparation for the heads of department like main result that is presented in this work. In order to verify the practical effectiveness of the proposed strategy, 12 heads of teaching departments of the polytechnic centers of the municipality of La Palma for the academic year 2014-2015 were studied and 5 managers, 69 teachers and 18 specialists of production and services. The evaluation of the results evidences advances in the preparation of the heads of departments and in their professional performance with teachers and specialist, according to the current requirements of the technical and professional continuing education of the worker in formation.

  16. Proceedings of the 18th technical meeting on nuclear reactor and radiation for KURRI engineers and the 9th technical official group section 5 meeting in Kyoto University

    International Nuclear Information System (INIS)

    2010-03-01

    This report is a summary of 18th Technical Meeting on Nuclear Reactor and Radiation for KURRI Engineers in Kyoto University. This was also the 9th meeting for technical official group section 5 (nuclear and radiation) in Kyoto University. In the workshop, three special lectures held were: (1) 'On Border Between Subcritical and Supercritical', (2) 'Memories of Nuclear Power Plant Management for 40 Years', and (3) 'Introduction of Technical Office in Faculty of Engineering, Kyoto University'. The technical presentations held were: (1) 'Radiation Background Study of Specialty Products in Senshu Region', (2) 'Introduction of Radioactivation Analysis at KUR', (3) 'Consideration of Critical Approach Method for KUR Low-Enrichment Fuel Reactor Core Using SRAC', (4) 'Evaluation of Temperature Coefficient of KUR Low-Enrichment Fuel Reactor Core Using SRAC'. As training for technical staffs in Technical Office, we visited the facility in Ashiu Research Forest. An introduction of this facility and the comments from the participants were included in this report. (S.K.)

  17. Evaluation of E/EV/SE aptitude to very long duration. Final report of working groups

    International Nuclear Information System (INIS)

    Leroy, C.; Bouniol, P.; Arrighi; Cellier; Gallois; Grandjean, J.P.; Mazaudier, F.; Siboulet, B.; Bouniol, P.

    2000-01-01

    A joint COGEMA/CEA action aims at evaluating the conditions allowing the extension beyond 50 years of the exploitation of the E/EV/SE vitrified wastes storage facility of the UP3 factory of La Hague (France). The approach considered consists in analysing the technical and administrative aspects of the facility in order to determine the changes to be implemented for its qualification as very long storage facility. Three target characteristics have been identified as priorities for this analysis: safety, civil engineering, and cooling ventilation of wells, and thus three working groups have been created. According to works carried out, facilities like the E/EV/SE one are designed in such a way that their durability can reach the century scale: the robustness of the cooling process, the passiveness of most equipments and the limitation of components functions are the main strong points. Service life limitations come mainly from the thermal evolution of waste packages and the aging of components under the climate conditions: risk of atmospheric corrosion of the bottom part of wells under the effect of water condensation, and risk of corrosion of concrete reinforcements. Suggestions of improvement of the quantification and understanding of phenomena influencing the lifetime limitation are made, and some possible technical solutions are proposed. (J.S.)

  18. Patterns of authorship in the IPCC Working Group III report

    Science.gov (United States)

    Corbera, Esteve; Calvet-Mir, Laura; Hughes, Hannah; Paterson, Matthew

    2016-01-01

    The Intergovernmental Panel on Climate Change (IPCC) has completed its Fifth Assessment Report (AR5). Here, we explore the social scientific networks informing Working Group III (WGIII) assessment of mitigation for the AR5. Identifying authors’ institutional pathways, we highlight the persistence and extent of North-South inequalities in the authorship of the report, revealing the dominance of US and UK institutions as training sites for WGIII authors. Examining patterns of co-authorship between WGIII authors, we identify the unevenness in co-authoring relations, with a small number of authors co-writing regularly and indicative of an epistemic community’s influence over the IPCC’s definition of mitigation. These co-authoring networks follow regional patterns, with significant EU-BRICS collaboration and authors from the US relatively insular. From a disciplinary perspective, economists, engineers, physicists and natural scientists remain central to the process, with insignificant participation of scholars from the humanities. The shared training and career paths made apparent through our analysis suggest that the idea that broader geographic participation may lead to a wider range of viewpoints and cultural understandings of climate change mitigation may not be as sound as previously thought.

  19. Energy-environment-development interactions. Report on working group 6

    International Nuclear Information System (INIS)

    1997-01-01

    Natural resources, including strategic resources as oil or fresh water, have been the cause of disputes and wars among nations. Natural resources have also been catalyzers of conflicts and objectives of military actions. In last decades, new potential sources of conflict have emerged, as high geographical concentration of fossil duels, acceleration of the depletion and pollution of otherwise renewable resources, and the increase of resource scarcity because of higher demands from population growth and larger consumption per capita. The potential change of climate threatens to become an important source of international tensions in the near future and to provoke the scarcity of vital resources in particular regions. If the world is to engage in a true process of sustainable development, radical changes in the present strategies and patterns of resources use are needed. This working group focused on the problems and potential solutions related to renewable energy sources. The topic of water and security were discussed as well as multilateral agreements and negotiations regarding global climate change

  20. Chemical Safety Vulnerability Working Group report. Volume 2

    International Nuclear Information System (INIS)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 2 consists of seven appendices containing the following: Tasking memorandums; Project plan for the CSV Review; Field verification guide for the CSV Review; Field verification report, Lawrence Livermore National Lab.; Field verification report, Oak Ridge Reservation; Field verification report, Savannah River Site; and the Field verification report, Hanford Site

  1. Free electron laser and coherent radiation. Working group summary

    International Nuclear Information System (INIS)

    Gover, A.; Csonka, P.; Deacon, D.

    1984-01-01

    The planned development of a new storage ring at SSRL gives hope for the exciting possibility that an x-ray laser may become available in a users facility. Such a device would certainly be a unique and revolutionary tool for scientific research and industrial applications, which may take advantage of the spatial and temporal coherence, high power and high brightness of this device in a wavelength regime where no alternative coherent radiation sources exist. The feasibility of implementing such a device in the new ring should be examined carefully by the ring designers. If conclusions are positive, the ring design should take into account the special requirements which are set by the x-ray laser design parameters. Our working group made the first step in this examination process. Most of the emphasis was put on the consideration of an X-Ray Free Electron Laser (XR FEL). FEL technology has developed in the last few years and was recently demonstrated to operate successfully in the visible wavelength regime in the ACO storage ring in Orsay

  2. Chemical Safety Vulnerability Working Group report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 2 consists of seven appendices containing the following: Tasking memorandums; Project plan for the CSV Review; Field verification guide for the CSV Review; Field verification report, Lawrence Livermore National Lab.; Field verification report, Oak Ridge Reservation; Field verification report, Savannah River Site; and the Field verification report, Hanford Site.

  3. THE CONCEPTION OF NURSING WORK BY STUDENTES AND TEACHERS FROM A TECHNICAL COURSE

    Directory of Open Access Journals (Sweden)

    Amailson Sandro Barros

    2016-12-01

    Full Text Available This article aims at presenting the conception of work envisioned by students and teachers from a technical course on nursing. For that end, we interviewed 12 students and 03 teachers from the course. The data was collected through structured interviews. The data obtained pointed to a concept of work relied on pleasure and satisfaction for caring, as well as source of remuneration, which is related to the ideological background perpetuated that associates nursing to dedication, obedience and material detachment. The speech of the participants disregards the shock between capital and labor and the social construction and historical exploitation of the workforce, keeping strongly the dogma of charity in the field of nursing. The reports pointed to the dual character of the work which comprises the abstract and concrete conceptions, leading to a division between intellectual labor versus manual work and precarization of labor in nursing and teaching.

  4. The Beyond the standard model working group: Summary report

    Energy Technology Data Exchange (ETDEWEB)

    G. Azuelos et al.

    2004-03-18

    In this working group we have investigated a number of aspects of searches for new physics beyond the Standard Model (SM) at the running or planned TeV-scale colliders. For the most part, we have considered hadron colliders, as they will define particle physics at the energy frontier for the next ten years at least. The variety of models for Beyond the Standard Model (BSM) physics has grown immensely. It is clear that only future experiments can provide the needed direction to clarify the correct theory. Thus, our focus has been on exploring the extent to which hadron colliders can discover and study BSM physics in various models. We have placed special emphasis on scenarios in which the new signal might be difficult to find or of a very unexpected nature. For example, in the context of supersymmetry (SUSY), we have considered: how to make fully precise predictions for the Higgs bosons as well as the superparticles of the Minimal Supersymmetric Standard Model (MSSM) (parts III and IV); MSSM scenarios in which most or all SUSY particles have rather large masses (parts V and VI); the ability to sort out the many parameters of the MSSM using a variety of signals and study channels (part VII); whether the no-lose theorem for MSSM Higgs discovery can be extended to the next-to-minimal Supersymmetric Standard Model (NMSSM) in which an additional singlet superfield is added to the minimal collection of superfields, potentially providing a natural explanation of the electroweak value of the parameter {micro} (part VIII); sorting out the effects of CP violation using Higgs plus squark associate production (part IX); the impact of lepton flavor violation of various kinds (part X); experimental possibilities for the gravitino and its sgoldstino partner (part XI); what the implications for SUSY would be if the NuTeV signal for di-muon events were interpreted as a sign of R-parity violation (part XII). Our other main focus was on the phenomenological implications of extra

  5. Report of measures taken by a working group for emergency

    International Nuclear Information System (INIS)

    Saito, Tadashi

    2012-01-01

    Facing the Fukushima Daiichi Nuclear Power Plant Accident (Mar. 11, 2011), the annually specified working group (WG) in the title was urgently organized by the sections of experts in charge of radiation supervising and of radiation safe handling in the Japan Radioisotope Association and this is the report given by its sub-WG B among 4 of A-D. Sub-WG B, consisting from 7 members, was defined to be responsible for getting hold of situations of the radioactive spread/contamination, for radio-levels in foods/water, and for methods of radiometry/radio-analysis. They were also responsible for disclosing all of information concerned. On-request radiometry was conducted mainly in Osaka University using equipments of Ge-semiconductor detector, facing NaI(Tl) scintillation detector, imaging plate, GM- or NaI scintillation-survey meters, liquid scintillation detector, fluoro-glass dosimeter, plastic scintillator, photodiode and other self-manufactured devices. Sampling of soil and vegetables was performed in late March to early May at the northern areas of the Plant, which were thought undermanned after the Accident in contrast to south where there were radiation facilities like High Energy Accelerator Research Organization, Tsukuba City (KEK). Driving survey in Fukushima Prefecture was done in April, June and October with a car-loaded NaI survey meter for environmental dose distribution, and with NaI(Tl) detector and spectro-scaler for gamma spectrum, which detected peaks of 131 I, 134 Cs, 137 Cs and 136 Cs in April. Change of atmospheric 222 Rn level had been investigated nationwide on hypothesis of its possible quake-preceding phenomenon as it was observed before 1995 Hanshin/Awaji Earthquake. The phenomenon was found recorded in the exhaust monitor of Fukushima Medical University before this 2011 Earthquake. (T.T.)

  6. Food parenting measurement issues: working group consensus report.

    Science.gov (United States)

    Hughes, Sheryl O; Frankel, Leslie A; Beltran, Alicia; Hodges, Eric; Hoerr, Sharon; Lumeng, Julie; Tovar, Alison; Kremers, Stef

    2013-08-01

    Childhood obesity is a growing problem. As more researchers become involved in the study of parenting influences on childhood obesity, there appears to be a lack of agreement regarding the most important parenting constructs of interest, definitions of those constructs, and measurement of those constructs in a consistent manner across studies. This article aims to summarize findings from a working group that convened specifically to discuss measurement issues related to parental influences on childhood obesity. Six subgroups were formed to address key measurement issues. The conceptualization subgroup proposed to define and distinguish constructs of general parenting styles, feeding styles, and food parenting practices with the goal of understanding interrelating levels of parental influence on child eating behaviors. The observational subgroup identified the need to map constructs for use in coding direct observations and create observational measures that can capture the bidirectional effects of parent-child interactions. The self-regulation subgroup proposed an operational definition of child self-regulation of energy intake and suggested future measures of self-regulation across different stages of development. The translational/community involvement subgroup proposed the involvement of community in the development of surveys so that measures adequately reflect cultural understanding and practices of the community. The qualitative methods subgroup proposed qualitative methods as a way to better understand the breadth of food parenting practices and motivations for the use of such practices. The longitudinal subgroup stressed the importance of food parenting measures sensitive to change for use in longitudinal studies. In the creation of new measures, it is important to consider cultural sensitivity and context-specific food parenting domains. Moderating variables such as child temperament and child food preferences should be considered in models.

  7. Group Work for Bulimia: A Review of Outcomes.

    Science.gov (United States)

    Zimpfer, David G.

    1990-01-01

    Reviews descriptive and experimental research relating to the eating disorder known as bulimia nervosa. Reviews outcome studies of group treatment of bulimia to examine the effectiveness of group intervention. Provides recommendations for practice and future research. (Author/PVV)

  8. Interprofessional education in Erlangen: A needs analysis and the conceptual work of a student working group.

    Science.gov (United States)

    Konietzko, Raffael; Frank, Luca; Maudanz, Nils; Binder, Johannes

    2016-01-01

    Interprofessional education (IPE) is receiving growing significance both nationally and internationally. Despite this, organizational and curricular changes are posing challenges. The level of need for IPE and how changes can be made to curricula and infrastructure were investigated at the University of Erlangen in Germany. The student working group for interprofessional teaching (AGIL) has turned its attention to these issues. This group is composed of students from medicine, dentistry, molecular medicine, medical technology and speech therapy. In June, 2015, a needs analysis was carried out among the students in the study programs represented in the working group to assess the actual and target situation concerning IPE (n=1,105). In the search for answers and to better measure any needs, contact was sought with instructors. The majority of students feel that they are insufficiently educated in terms of interprofessional skills. A large proportion of the students wish to see expansion of the IPE offerings. Students also expressed a desire for additional spaces and welcomed the idea of an interprofessional learning center. AGIL began establishing interprofessional electives in October 2015. A concept for an interprofessional learning center was developed. Based on the survey results, a need for improvements to curricula and infrastructure can be seen; however, the results are limited to the student point of view. AGIL would like to establish more interprofessional electives. These courses would then facilitate curricular implementation. Modern ideas about study environments could be applied to IPE, in particular to promote informal forms of learning. Contact with instructors was crucial for the project work and should be expanded. Realizing and financing the learning center in Erlangen are now the future goals of AGIL. The aim is to create a foundation for this purpose.

  9. Technical Training Programme: Learning for the LHC ! CLEAN-2002: WORKING IN A CLEANROOM

    CERN Multimedia

    Davide Vitè

    2002-01-01

    CLEAN-2002 is a new, free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. More information and registration through EDH is available HERE The next session, in English, will be on 24 April (afternoon). Other sessions, in French and English, will be offered following demand: the first session in French will be organised in May or June. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  10. CERN Technical Training Programme: Learning for the LHC ! CLEAN-2002: Working in a Cleanroom

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Exceptional session in Italian on June 13, 2002 (am). CLEAN-2002 is a new, free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. More information and registration through EDH is available here. The next session will be held in Italian, on 13 June (morning), following a specific request. Other sessions, in French and English, will be offered following demand: the first session in French will be organised in July 2002. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  11. International Working Group on Nuclear Power Plant Control and Instrumentation: Recent activities and future prospects

    International Nuclear Information System (INIS)

    Kossilov, A.

    1992-01-01

    The IWG-NPPCI working group exists to consider developments, disseminate and exchange experience in all aspects of instrumentation, control and information technology relevant to the safety and economics of NPP design and operation. The main topics dealt with are: nuclear instrumentation, control systems, protection systems, early failure detection and diagnosis, use of computer technology in NPP operation, instrumentation for accidental situation, operator support systems, man-machine interface. The main objectives of the IWG-NPPCI are: to assist the IAEA to provide the Member States with information and recommendations on technical aspects of the NPP control and instrumentation with the aim to assure reliable functions; to promote and exchange of information on national programs, new developments and experience from operating NPPs, and to stimulate the coordination of research on NPP control and instrumentation

  12. International Working Group on Nuclear Power Plant Control and Instrumentation: Recent activities and future prospects

    Energy Technology Data Exchange (ETDEWEB)

    Kossilov, A [International Atomic Energy Agency, Vienna (Austria)

    1992-07-01

    The IWG-NPPCI working group exists to consider developments, disseminate and exchange experience in all aspects of instrumentation, control and information technology relevant to the safety and economics of NPP design and operation. The main topics dealt with are: nuclear instrumentation, control systems, protection systems, early failure detection and diagnosis, use of computer technology in NPP operation, instrumentation for accidental situation, operator support systems, man-machine interface. The main objectives of the IWG-NPPCI are: to assist the IAEA to provide the Member States with information and recommendations on technical aspects of the NPP control and instrumentation with the aim to assure reliable functions; to promote and exchange of information on national programs, new developments and experience from operating NPPs, and to stimulate the coordination of research on NPP control and instrumentation.

  13. Organization of work with training mathematical text for technical university students under conditions of informatization of education

    Directory of Open Access Journals (Sweden)

    Михаил Владимирович Поспелов

    2013-12-01

    Full Text Available This article describes the model of the organization of working with training mathematical text for technical university students. Need for development of training text works competencies of first-year students is proved. The impact of learning materials transition into hypertext format on training text works organizing theory is cleared. Training text works organizing stages are described.

  14. Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

    Science.gov (United States)

    Castner, Ray

    2012-01-01

    The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

  15. Frontex Working Arrangements: Legitimacy and Human Rights Concerns Regarding ‘Technical Relationships’

    Directory of Open Access Journals (Sweden)

    Melanie Fink

    2012-06-01

    Full Text Available Practices of extraterritorialisation have become cornerstones of the European Union member states' border control. Most of them are highly dependent on the willingness of third countries to cooperate. An increasingly important phenomenon is that cooperation is secured through relationships established by administrative authorities. This article deals with the challenges arising from the active engagement of Frontex in setting up cooperation structures.It is argued that the so-called working arrangements concluded between Frontex and the respective authorities of third countries, in their current form, show considerable deficiencies from the perspectives of the rule of law, democracy and human rights protection. They are not open to judicial review, the Parliament is not involved in their conclusion and they are not disclosed to the public. Furthermore, the human rights record of cooperating authorities is not considered. Concerns in this respect are frequently attempted to be dispelled by recourse to the 'technical' as opposed to 'political' nature of working arrangements. Likewise, it is assumed that merely 'technical relationships' cannot affect individuals. These arguments are not convincing. Quite the contrary, the political implications of working arrangements and their operation in a highly human rights sensitive field demand conformity with the fundamental values the European Union is based on.

  16. Report of the Solar and Atmospheric Neutrino Working Group

    International Nuclear Information System (INIS)

    Back, H.; Bahcall, J.N.; Bernabeu, J.; Boulay, M.G.; Bowles, T.; Calaprice, F.; Champagne, A.; Freedman, S.; Gai, M.; Galbiati, C.; Gallagher, H.; Gonzalez-Garcia, C.; Hahn, R.L.; Heeger, K.M.; Hime, A.; Jung, C.K.; Klein, J.R.; Koike, M.; Lanou, R.; Learned, J.G.; Lesko, K.T.; Losecco, J.; Maltoni, M.; Mann, A.; McKinsey, D.; Palomares-Ruiz, S.; Pena-Garay, C.; Petcov, S.T.; Piepke, A.; Pitt, M.; Raghavan, R.; Robertson, R.G.H.; Scholberg, K.; Sobel, H.W.; Takeuchi, T.; Vogelaar, R.; Wolfenstein, L.

    2004-01-01

    The highest priority of the Solar and Atmospheric Neutrino Experiment Working Group is the development of a real-time, precision experiment that measures the pp solar neutrino flux. A measurement of the pp solar neutrino flux, in comparison with the existing precision measurements of the high energy 8 B neutrino flux, will demonstrate the transition between vacuum and matter-dominated oscillations, thereby quantitatively testing a fundamental prediction of the standard scenario of neutrino flavor transformation. The initial solar neutrino beam is pure ν e , which also permits sensitive tests for sterile neutrinos. The pp experiment will also permit a significantly improved determination of θ 12 and, together with other solar neutrino measurements, either a measurement of θ 13 or a constraint a factor of two lower than existing bounds. In combination with the essential pre-requisite experiments that will measure the 7 Be solar neutrino flux with a precision of 5%, a measurement of the pp solar neutrino flux will constitute a sensitive test for non-standard energy generation mechanisms within the Sun. The Standard Solar Model predicts that the pp and 7 Be neutrinos together constitute more than 98% of the solar neutrino flux. The comparison of the solar luminosity measured via neutrinos to that measured via photons will test for any unknown energy generation mechanisms within the nearest star. A precise measurement of the pp neutrino flux (predicted to be 92% of the total flux) will also test stringently the theory of stellar evolution since the Standard Solar Model predicts the pp flux with a theoretical uncertainty of 1%. We also find that an atmospheric neutrino experiment capable of resolving the mass hierarchy is a high priority. Atmospheric neutrino experiments may be the only alternative to very long baseline accelerator experiments as a way of resolving this fundamental question. Such an experiment could be a very large scale water Cerenkov detector, or a

  17. Rotational Seismology: AGU Session, Working Group, and Website

    Science.gov (United States)

    Lee, William H.K.; Igel, Heiner; Todorovska, Maria I.; Evans, John R.

    2007-01-01

    . Igel, W.H.K. Lee, and M. Todorovska during the 2006 AGU Fall Meeting. The goal of this session was to discuss rotational sensors, observations, modeling, theoretical aspects, and potential applications of rotational ground motions. The session was accompanied by the inauguration of an International Working Group on Rotational Seismology (IWGoRS) which aims to promote investigations of all aspects of rotational motions in seismology and their implications for related fields such as earthquake engineering, geodesy, strong-motion seismology, and tectonics, as well as to share experience, data, software, and results in an open Web-based environment. The primary goal of this article is to make the Earth Science Community aware of the emergence of the field of rotational seismology.

  18. UFD Storage and Transportation - Transportation Working Group Report

    International Nuclear Information System (INIS)

    Maheras, Steven J.; Ross, Steven B.

    2011-01-01

    The Used Fuel Disposition (UFD) Transportation Task commenced in October 2010. As its first task, Pacific Northwest National Laboratory (PNNL) compiled a list of structures, systems, and components (SSCs) of transportation systems and their possible degradation mechanisms during extended storage. The list of SSCs and the associated degradation mechanisms (known as features, events, and processes (FEPs)) were based on the list of used nuclear fuel (UNF) storage system SSCs and degradation mechanisms developed by the UFD Storage Task (Hanson et al. 2011). Other sources of information surveyed to develop the list of SSCs and their degradation mechanisms included references such as Evaluation of the Technical Basis for Extended Dry Storage and Transportation of Used Nuclear Fuel (NWTRB 2010), Transportation, Aging and Disposal Canister System Performance Specification, Revision 1 (OCRWM 2008), Data Needs for Long-Term Storage of LWR Fuel (EPRI 1998), Technical Bases for Extended Dry Storage of Spent Nuclear Fuel (EPRI 2002), Used Fuel and High-Level Radioactive Waste Extended Storage Collaboration Program (EPRI 2010a), Industry Spent Fuel Storage Handbook (EPRI 2010b), and Transportation of Commercial Spent Nuclear Fuel, Issues Resolution (EPRI 2010c). SSCs include items such as the fuel, cladding, fuel baskets, neutron poisons, metal canisters, etc. Potential degradation mechanisms (FEPs) included mechanical, thermal, radiation and chemical stressors, such as fuel fragmentation, embrittlement of cladding by hydrogen, oxidation of cladding, metal fatigue, corrosion, etc. These degradation mechanisms are discussed in Section 2 of this report. The degradation mechanisms have been evaluated to determine if they would be influenced by extended storage or high burnup, the need for additional data, and their importance to transportation. These categories were used to identify the most significant transportation degradation mechanisms. As expected, for the most part, the

  19. Social Pedagogical Work with Different Age Groups in Germany

    Science.gov (United States)

    Toporkova, Olga; Glebova, Ekaterina; Vysotskaia, Inna V.; Tikhaeva, Victoria V.

    2016-01-01

    Background/Objectives: The main objective of the article is to study, analyze and organize the modern German experience in the sphere of social pedagogical and educational work with socially unprotected adults, including youth and the elderly. The retrospective analysis threw light on the background of work with socially unprotected adults in…

  20. Nordic working group on CCF studies. Parameter estimation within the activities of the Nordic CCF Group

    International Nuclear Information System (INIS)

    Johansson, G.

    2002-01-01

    This is a presentation of a project programme for assessment of CCF events and adoption of international data derived in the ICDE project to conditions in Sweden and Finland. The overall objective with the working group is to: - Support safety by studying potential and real CCF events and report conclusions and recommendations that can improve the understanding of these events eventually resulting in increased safety; - The result is intended for application in NPP operation, maintenance, inspection and risk assessments. The work is divided into one quantitative and one qualitative part with the following specific objectives: Qualitative objectives: Compile experiences data and generate insights in terms of relevant failure mechanisms and effective CCF protection measures. The results shall be presented as a guide with checklists and recommendations on how to identify current CCF protection standard and improvement possibilities regarding CCF defenses decreasing the CCF vulnerability. Quantitative objectives: Prepare a Nordic C-book where quantitative insights as Impact Vectors and CCF parameters for different redundancy levels are presented. Uncertainties in CCF data shall be reduced as much as possible. The high redundancy systems sensitivity to CCF events demand a well structured quantitative analysis in support of best possible and realistic CCF parameter estimates, if possible, plant specific. Model survey and review: This survey shah examine available models and their applicability for use on the data. Several models exist and are used in the Nordic PSAs. Data survey and review: This survey shall examine available data sources and their applicability. The survey shah review ICDE and other sources and Provide a background for the decision on what data to be used. A possible outcome is of course that the ICDE data are shown to cover all other sources, but there are possibilities the ICDE data shall be combined with some other source. The situation also differs