CERN technical training: available places in forthcoming courses

CERN Multimedia

HR Department

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Developing secure software\t07-DEC-09\t07-DEC-09\t0.5 day\tEnglish PERL 5 - Advanced Aspects\t10-DEC-09\t10-DEC-09\t1 day\tEnglish Electronic design LabVIEW - Working efficiently with LabVIEW 8\t07-DEC-09\t07-DEC-09\t1 day\tEnglish Mechanical design Office software Sharepoint Designer (Frontpage) - Level 1\t07-DEC-09\t08-DEC-09\t2 days\tEnglish Special course Egroups training\t15-DEC-09\t15-DEC-09\t0.5 jour\tFrench If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found here under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – se...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 - 30.4.2004 (5 days) Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Pla...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

TECHNICAL TRAINING: Places available**

CERN Multimedia

2003-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

Technical training - places available

CERN Multimedia

2012-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department »Electronics design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 3 places available Foundations of Electromagnetism and Magnet Design (EMAG) 14-Nov-12 to 27-Nov-12 6 days English 20 places available Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 15 places available Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 7 places available LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places available »Mechanical design Next Se...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. *************************************** Software and System Technologies Oracle - Programming with PL/SQL 28-JUN-10 30-JUN-10 English 3 days Project Development using Python  29-JUN-10  02-JUL-10  English 4 days JAVA - Level 2 05-JUL-10 08-JUL-10 English 4 days Electronic Design CAO = Allegro Design Entry HDL Front-to-Back Flow v16.3  28-JUN-10 30-JUN-10 French 3 jours LabVIEW Data ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the 2007 CERN Technical Training Programme and still have places available. You may find the full, updated Technical Training course programme on our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE FrontPage 2003 – Level 1\tE\t29-30.11\t2 d Word 2007 – niveau 2 : ECDL\tF\t13-14.12\t2 d SOFTWARE AND SYSTEM TECHNOLOGIES JAVA – Level 1\tE\t03-05.12\t3 d ELECTRONIC DESIGN LabVIEW Base 1 F\t03-05.12\t3 d LabVIEW Basics 2\tE\t06-07.12\t2 d MECHANICAL DESIGN AutoCAD Mechanical 2006\tF\t27-28.11\t2 d Technique du vide\tF\t12-13.11\t2 d If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-reque...

Technical training: places available

CERN Multimedia

HR Department

2007-01-01

CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

CERN Technical Training: Open Courses (June - July 2007)

CERN Multimedia

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: LabVIEW Basics 1 (English): 11.6.-13.6.2007 (3 days, 1 place available) JCOP – Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 2 places available) LabVIEW Basics 2 (English): 14.6.-15.6.2007 (2 days, 2 places available) Project Planning with MS-Project (English): 19.6., 26.6.(am), 3.7.(am) (2 days, 3 modules, 4 places available) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming (English) 19.6.-21.6.2007 (3 days, 9 places available) Python – Hands-on-Introduction (English): 19.6.-21.6.2007 (3 days, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, full) Simplorer (English): 21.6.-22.6.2007 (2 days, 3 places available) Java – Level 1 (English): 27.6.-29.6.2007 (3 days, 5 places available) AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) LabVIEW – ...

LabVIEW Support at CERN

CERN Multimedia

HR Department

2010-01-01

Since the beginning of 2009, due to the CERN restructuring, LabVIEW support moved from the IT to the EN department, joining the Industrial Controls and Electronics Group (ICE). LabVIEW support has been merged with the Measurement, Test and Analysis (MTA) section which, using LabVIEW, has developed most of the measurement systems to qualify the LHC magnets and components over the past 10 years. The post mortem analysis for the LHC hardware commissioning has also been fully implemented using LabVIEW, customised into a framework, called RADE, for CERN needs. The MTA section has started with a proactive approach sharing its tools and experience with the CERN LabVIEW community. Its framework (RADE) for CERN integrated application development has been made available to the users. Courses on RADE have been integrated into the standard National Instruments training program at CERN. RADE and LabVIEW support were merged together in 2010 on a single email address:labview.support@cern.ch For more information please...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Emacs - way beyond Text Editing\t16-JUL-10\t16-JUL-10\tEnglish\t1 day JAVA - Level 2\t05-JUL-10\t08-JUL-10\tEnglish\t4 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglish\t4 days Oracle - Programming with PL/SQL\t28-JUN-10\t30-JUN-10\tEnglish\t3 days Project Development using Python\t29-JUN-10\t02-JUL-10\tEnglish\t4 days Electronic design CAO = Allegro Design Entry HDL Front-to-Back Flow v16.3\t28-JUN-10\t30-JUN-10\tFrench\t3 jours LabVIEW Communication with RADE applications\t01-JUL-10\t02-JUL-10\tEnglish\t2 days Managing Software Engineering in LabVIEW\t08-JUL-10\t09-JUL-10\tEnglish\t2 days LabVIEW Data Acquisition and Signal Conditioning Course\t05-JUL-10\t07-JUL-10\tFrench\t3 jours Siemen...

CERN Technical Training: Open Courses (April - June 2007)

CERN Multimedia

HR Department

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: FrontPage 2003, niveau 1 (French): 7.6.-8.6.2007 (2 days, 5 places available) LabVIEW Basics 1 (English): 11.6.-13.6.2007 (3 days, 1 place available) JCOP - Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 3 places available) LabVIEW Basics 2 (English): 14.6.-15.6.2007 (2 days, 3 places available) Project Planning with MS-Project (English): 19.6., 26.6.(am), 3.7.(am) (2 days, 3 modules, 6 places available) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming (English) 19.6.-21.6.2007 (3 days, places available) Python - Hands-on-Introduction (English): 19.6.-21.6.2007 (3 days, FULL) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, 1 place available) Simplorer (English): 21.6.-22.6.2007 (2 days, 4 places available) Java - Level 1 (English): 25.6.-27.6.2007 (3 days, 5 places available) AutoCAD 2006 - ...

CERN Technical Training: Open Courses (June - July 2007)

CERN Multimedia

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: Project Planning with MS-Project (English): 19.6., 26.6.(am), 3.7.(am) (2 days, 3 modules, 4 places available) Python – Hands-on-Introduction (English): 19.6.-21.6.2007 (3 days, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, full) Simplorer (English): 21.6.-22.6.2007 (2 days, 2 places available) Impacts de la suppression du plomb (RoHS) en electronique (French): 21.6.2007 (1/2 day, places available) Java – Level 1 (English): 27.6.-29.6.2007 (3 days, 4 places available) AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) LabVIEW – Working efficiently with LabVIEW 8 (English): 29.6.2007 (1 day, 5 places available) Java – Level 2 (English): 2.7.-5.7.2007 (4 days, 2 places available) MATLAB – Fundamentals and Programming Techniques (English): 2.7.-3.7.2007 (2 days, full) MATLAB...

CERN Technical Training: Open Courses (June - July 2007)

CERN Multimedia

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: Java – Level 1 (English): 27.6.-29.6.2007 (3 days, 2 places available) AutoCAD 2006 - niveau 1 (French): 27.6. - 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) LabVIEW – Working efficiently with LabVIEW 8 (English): 29.6.2007 (1 day, 6 places available) Java – Level 2 (English): 2.7.-5.7.2007 (4 days, 3 places available) MATLAB – Fundamentals and Programming Techniques (English): 2.7.-3.7.2007 (2 days, full) MATLAB – Simulink for System and Algorithm Modeling (English) 4.7.-5.7.2007 (2 days, 2 places available) Automate de Sécurité (French): -> POSTPONED > from 9 to 11 October 2007 ! 10.7.-12.7.2007 (3 days, full) Oracle – HTML DB 2.0: Develop Web Applications (English): 11.7.-13.7.2007 (3 days, 7 places available) Technique du vide (French): 11.7.-12.7.2007 (2 days, full) ANSYS – Classical (French) 16.7.-20.7.2007 (5 days, 4 pl...

CERN Technical Training: Open Courses (June-July 2007)

CERN Multimedia

HR Department

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: FrontPage 2003, niveau 1 (French): 7.6.-8.6.2007 (2 days, 5 places available) LabVIEW Basics 1 (English): 11.6.-13.6.2007 (3 days, 1 place available) JCOP - Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 2 places available) LabVIEW Basics 2 (English): 14.6.-15.6.2007 (2 days, 2 places available) Project Planning with MS-Project (English): 19.6., 26.6.(am), 3.7.(am) (2 days, 3 modules, 5 places available) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming (English) 19.6.-21.6.2007 (3 days, places available) Python - Hands-on-Introduction (English): 19.6.-21.6.2007 (3 days, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, full) Simplorer (English): 21.6.-22.6.2007 (2 days, 3 places available) Java - Level 1 (English): 25.6.-27.6.2007 (3 days, 5 places available) AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6...

CERN Technical Training: Open Courses (April - June 2007)

CERN Multimedia

HR Department

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 4 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) * NEW COURSE* JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Base 1 (in French): 2.-4.5.2007 (3 days, few places available) LabVIEW Intermediate 1 (previously: Application Development)...

CERN Technical Training: Open Courses (April - June 2007)

CERN Multimedia

HR Department

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, 3 places available) Automate de sécurité S7 (French) 14.5.-16.5.2007 (3 days, full) * NEW COURSE* FrontPage 2003, niveau 1 (French): 7.6.-8.6.2007 (2 days, 6 places available) LabVIEW Basics 1 (English): 11.-13.6.2007 (3 days, 4 places available) LabVIEW Basics 2 (English/French): 14.-15.6.2007 (2 days, 5 places available) Java - Level 1 (English): 25.6.-27.6.2007 (3 days, 8 places available) Java - Level 2 (English): 2.7.-5.7.2007 (4 days, 4 places available) JCOP - Joint PVSS-JCOP Framework (English): 21.5.-25.5.2007 (5 days, full) JCOP - Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 5 places available) Project Planning with MS-Project (English): 19.6....

CERN Technical Training: Open Courses (April - June 2007)

CERN Multimedia

HR Department

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, 3 places available) FrontPage 2003, niveau 1 (French): 7.6.-8.6.2007 (2 days, 6 places available) LabVIEW Basics 1 (English): 11.-13.6.2007 (3 days, 4 places available) LabVIEW Basics 2 (English/French): 14.-15.6.2007 (2 days, 5 places available) Java - Level 1 (English): 25.6.-27.6.2007 (3 days, 8 places available) Java - Level 2 (English): 2.7.-5.7.2007 (4 days, 4 places available) JCOP - Joint PVSS-JCOP Framework (English): 21.5.-25.5.2007 (5 days, full) JCOP - Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 5 places available) Project Planning with MS-Project (English): 19.6.-21.6.2007 (3 days, 5 places available) Simplorer (English): 21.6.-22.6.2007 (2 days, few places availab...

Advanced LabVIEW Labs

International Nuclear Information System (INIS)

Jones, Eric D.

1999-01-01

In the world of computer-based data acquisition and control, the graphical interface program LabVIEW from National Instruments is so ubiquitous that in many ways it has almost become the laboratory standard. To date, there have been approximately fifteen books concerning LabVIEW, but Professor Essick's treatise takes on a completely different tack than all of the previous discussions. In the more standard treatments of the ways and wherefores of LabVIEW such as LabVIEW Graphical Programming: Practical Applications in Instrumentation and Control by Gary W. Johnson (McGraw Hill, NY 1997), the emphasis has been instructing the reader how to program LabVIEW to create a Virtual Instrument (VI) on the computer for interfacing to a particular instruments. LabVIEW is written in ''G'' a graphical programming language developed by National Instruments. In the past the emphasis has been on training the experimenter to learn ''G''. Without going into details here, ''G'' incorporates the usual loops, arithmetic expressions, etc., found in many programming languages, but in an icon (graphical) environment. The net result being that LabVIEW contains all of the standard methods needed for interfacing to instruments, data acquisition, data analysis, graphics, and also methodology to incorporate programs written in other languages into LabVIEW. Historically, according to Professor Essick, he developed a series of experiments for an upper division laboratory course for computer-based instrumentation. His observation was that while many students had the necessary background in computer programming languages, there were students who had virtually no concept about writing a computer program let alone a computer- based interfacing program. Thus the beginnings of a concept for not only teaching computer- based instrumentation techniques, but aiso a method for the beginner to experience writing a com- puter program. Professor Essick saw LabVIEW as the ''perfect environment in which to

Technical training - Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 16.5.2006 (May-November course sessions) Technical Training: Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E ACROBAT 7.0 : Utilisation de fichiers PDF 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06 E LabVIEW Base 2 32 27.06-5.07.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-...

LabVIEW workshops 2016: a free and fun way to learn a new programming language

CERN Multimedia

2016-01-01

We are organising about 5 workshops (1 day per week - 2 hours after work) at CERN in the following months, particularly aimed at CERN people (especially technical students).      The courses will start with the basics of LabVIEW. During the course, which is based on official National Instruments (NI) training materials, we'll learn together how to program in LabVIEW and how to interface with NI hardware. Depending on the participants’ needs and requests, the topics of FPGA and Real-Time could also be explored. The course ends with the CLAD certificate exam. The course and materials are in English. What is LabVIEW? A highly productive development environment for creating custom applications, allowing users to code in a single language for devices ranging from FPGA, through RT systems to PCs. The software is used at CERN, but not everybody has had the opportunity to work with it. Now could be a good time for you to start. Target audience: For students a...

Spike-train acquisition, analysis and real-time experimental control using a graphical programming language (LabView).

Science.gov (United States)

Nordstrom, M A; Mapletoft, E A; Miles, T S

1995-11-01

A solution is described for the acquisition on a personal computer of standard pulses derived from neuronal discharge, measurement of neuronal discharge times, real-time control of stimulus delivery based on specified inter-pulse interval conditions in the neuronal spike train, and on-line display and analysis of the experimental data. The hardware consisted of an Apple Macintosh IIci computer and a plug-in card (National Instruments NB-MIO16) that supports A/D, D/A, digital I/O and timer functions. The software was written in the object-oriented graphical programming language LabView. Essential elements of the source code of the LabView program are presented and explained. The use of the system is demonstrated in an experiment in which the reflex responses to muscle stretch are assessed for a single motor unit in the human masseter muscle.

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2011-01-01

The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t16-Mar-11\t18-Mar-11\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t05-APR-11\t07-APR-11\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t14-Mar-11\t18-Mar-11\tEnglish\t4,5 days Linux LPI 101 - Introduction à Linux et LPI 102 Administration systèmes sur Linux\t8-Mar-11\t11-Mar-11\tEnglish\t4 days Oracle - SQL\t16-Mar-11\t18-Mar-11\tEnglish\t3 days Oracle Databases: Advanced PL/SQL Programming\t21-Mar-11\t23-Mar-11\tEnglish\t3 days Electronic design Electromagnetic Compatibility (EMC) : Introduction\t06-APR-11\t06-APR-11\tBilingual\t0,5 days Advanced VHDL for FPGA Design\t04-APR-11\t08-APR-11\tEnglish\t5 days AutoCAD 2011 - level 1\t28-Mar-11\t05-APR-11\tFrench\t4 jours LabVIEW for beg...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2011-01-01

The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t21-feb-11\t22-FEB-11\tEnglish\t2 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t08-Feb-11\t09-Feb-11\tEnglish\t2 days Introduction to Databases and Database Design\t10-Mar-11\t11-Mar-11\tEnglish\t2 days JAVA 2 Entreprise Edition - Part 2: Enterprise JavaBeans\t16-Mar-11\t18-Mar-11\tEnglish\t3 days JCOP-Joint PVSS-JCOP Framework\t14-Mar-11\t18-Mar-11\tEnglish\t4.5 days Linux LPI 101 - Introduction à Linux et LPI 102 Administration systèmes sur Linux\t8-Mar-11\t11-Mar-11\tFrançais\t4 jours ORACLE-SQL\t16-Mar-11\t18-Mar-11\tEnglish\t3 days Oracle Databases: Advanced PL/SQL Programming\t21-Mar-11\t23-Mar-11\tEnglish\t3 days Electronic design LabVIEW for beginners\t21-Mar-11\t23-Mar-11\tBilingual\t3 days/...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11, 12, 18, 19.5.2005 (4 jours) Object-Oriented Analysis and Design using UML: 17 - 19.5.2005 (3 days) Synplify Pro Training: 18.5.2005 (1 day) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) Introduction à la CAO CADENCE : 31.5 - 1.6.2005 (2 jours) LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introductio...

TECHNICAL TRAINING SEMINAR: National Instruments

CERN Multimedia

Monique Duval

2004-01-01

From 9:30 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Data acquisition systems on PCs, industrial measurement and control techniques, advanced LabVIEW software and PXI instrumentation, and system components for tests and automation will be presented. Walk-in courses will address DIAdem, LabVIEW and data acquisition. Language: English and French Free seminars and courses, no registration Organisers: Rolf Stampfli / IT-CO / 78102 & 160367 / Rolf.Stampfli@cern.ch Davide Vitè / HR-PMD-ATT / 75141 Davide.Vite@cern.ch For more information and the complete event programme, please visit the...

TECHNICAL TRAINING SEMINAR

CERN Multimedia

Davide VITÈ

2002-01-01

Wednesday 27 February   from 9:00 to 12:00, LHC Auditorium, bldg. 33 7-018 LabVIEW Real-Time National Instruments, Ennetbaden, Switzerland With LabVIEW Real-Time, you can choose from a variety of RT Series hardware. Add a real-time data acquisition component into a larger measurement and automation system or create a single stand-alone real-time solution with data acquisition, signal conditioning, motion control, RS-232, GPIB instrumentation, and Ethernet connectivity. With the various hardware options, you can create a system to meet your precise needs today, while the modularity of the system means you can add to the solution as your system requirements grow. If you are interested in Reliable and Deterministic systems for Measurement and Automation, you will profit from this seminar. Agenda: Real-Time Overview LabVIEW RT Hardware Platforms - Linux on PXI Programming with LabVIEW RT Real-Time Operating Systems concepts Timing Applications Data Transfer Industrial Contact: Pierre-Andr&ea...

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 12, 13, 18, 19.5.2005 (4 jours) ACCESS 2003 - Level 1: ECDL M5 : 11 & 12.5.2005 (2 days) Object-Oriented Analysis and Design using UML: 17 - 19.5.2005 (3 days) Synplify Pro Training: 18.5.2005 (1 day) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) Introduction à la CAO CADENCE : 31.5 - 1.6.2005 (2 jours) LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Intr...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Emacs - way beyond Text Editing\t09-DEC-10\t09-DEC-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t13-DEC-10\t13-DEC-10\tEnglish\t1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t13-DEC-10\t15-DEC-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t29-Nov-10\t03-DEC-10\tEnglish\t4.5 days Object-oriented Design Patterns\t06-DEC-10\t08-DEC-10\tEnglish\t3 days Oracle - Programming with PL/SQL\t06-DEC-10\t08-DEC-10\tEnglish\t3 days Oracle - SQL\t01-DEC-10\t03-DEC-10\tEnglish\t3 days PERL 5 - Advanced Aspects\t30-Nov-10\t30-Nov-10\tEnglish\t1 day XML - Introduction\t01-DEC-10\t02-DEC-10\tEnglish\t2 days Electronic design Cours de base Automation du bâtiment\t15-DEC-10\t17-DEC-10\tFrench\t3 jours LabVIEW Core I with RADE introduction\t29-Nov-10\t01-DEC-10\tBi...

Technical Training: WBTechT offers online training

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005 The 2005 CERN Web-Based Technical Training portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications and 90.- CHF for technical applications for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTOs to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

Technical Training: WBTechT offers online training

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005 The 2005 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications and 90.- CHF for technical applications for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

Practical guide to machine vision software an introduction with LabVIEW

CERN Document Server

Kwon, Kye-Si

2014-01-01

For both students and engineers in R&D, this book explains machine vision in a concise, hands-on way, using the Vision Development Module of the LabView software by National Instruments. Following a short introduction to the basics of machine vision and the technical procedures of image acquisition, the book goes on to guide readers in the use of the various software functions of LabView's machine vision module. It covers typical machine vision tasks, including particle analysis, edge detection, pattern and shape matching, dimension measurements as well as optical character recognition, enabli

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 –Novelties\tE\t03.03\t1 d Sharepoint designer (Frontpage) – Niveau 2\tF\t05-06.03\t2 d CERN EDMS - Introduction\tF\t12.03\t1 d CERN EDMS for Engineers\tE\t20.03\t1 d CERN EDMS for Local Administrators\tE\t37.03\t1 d Word 2007 (Short course I: HowTo. work with AutoTasks)\tB\t31.03\t0.5 d Word 2007 (Short course II: HowTo mail merge)\tB\t31.03\t0.5 d SOFTWARE AND SYSTEM TECHNOLOGIES Java 2 Enterprise Edition – Part 1: Web Applications\tE\t03-04.03\t2 d Perl 5 – Introduction\tE\t05.03\t1 d JCOP – Joint PVSS\tE\t10-14.03\t4 d Python – Hands-on Introduction\tE\t26-28.03\t3 d ELECTRONIC DESIGN Electrostatique Discharge Protection ESD\tF\t29.2\t0.5 d Altium designer – migration for occasional PCAD users\tF\t04-06.03\t3 d LabVIEW Intermediaire 1\tF\t10-12.03...

Labview advanced programming techniques, second edition

CERN Document Server

Bitter, Rick; Nawrocki, Matt

2006-01-01

Whether seeking deeper knowledge of LabVIEW®'s capabilities or striving to build enhanced VIs, professionals know they will find everything they need in LabVIEW: Advanced Programming Techniques. Now accompanied by LabVIEW 2011, this classic second edition, focusing on LabVIEW 8.0, delves deeply into the classic features that continue to make LabVIEW one of the most popular and widely used graphical programming environments across the engineering community. The authors review the front panel controls, the Standard State Machine template, drivers, the instrument I/O assistant, error handling functions, hyperthreading, and Express VIs. It covers the introduction of the Shared Variables function in LabVIEW 8.0 and explores the LabVIEW project view. The chapter on ActiveX includes discussion of the Microsoft™ .NET® framework and new examples of programming in LabVIEW using .NET. Numerous illustrations and step-by-step explanations provide hands-on guidance. Reviewing LabVIEW 8.0 and accompanied by the latest s...

Technical Training: Technical Training Seminar

CERN Multimedia

2004-01-01

TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

LabVIEW 8 student edition

CERN Document Server

Bishop, Robert H

2007-01-01

For courses in Measurement and Instrumentation, Electrical Engineering lab, and Physics and Chemistry lab. This revised printing has been updated to include new LabVIEW 8.2 Student Edition. National Instruments' LabVIEW is the defacto industry standard for test, measurement, and automation software solutions. With the Student Edition of LabVIEW, students can design graphical programming solutions to their classroom problems and laboratory experiments with software that delivers the graphical programming capabilites of the LabVIEW professional version. . The Student Edition is also compatible with all National Instruments data acquisition and instrument control hardware. Note: The LabVIEW Student Edition is available to students, faculty, and staff for personal educational use only. It is not intended for research, institutional, or commercial use. For more information about these licensing options, please visit the National Instruments website at (http:www.ni.com/academic/)

Linear Motor Motion Control Experiment System Design Based on LabVIEW

Directory of Open Access Journals (Sweden)

Cuixian He

2018-01-01

Full Text Available In order to meet the needs of experimental training of electrical information industry, a linear motor motion experiment system based on LabVIEW was developed. This system is based on the STM32F103ZET6 system processor controller, a state signal when the motor moves through the grating encoder feedback controller to form a closed loop, through the RS232 serial port communication with the host computer, the host computer is designed in the LabVIEW interactive environment monitoring software. Combined with the modular design concept proposed overall program, given the detailed hardware circuit, targeted for the software function design, to achieve man-machine interface. The system control of high accuracy, good stability, meet the training requirements for laboratory equipment, but also as a reference embodiment of the linear motor monitoring system.

CERN Technical Training 2006 - WBTechT offers online training

CERN Multimedia

2006-01-01

The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal, or the WBTechT information page at http://www.cern.ch/TechnicalTraining, and contact technical.training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

CERN Technical Training 2006: WBTechT offers online training

CERN Multimedia

Davide Vitè

2006-01-01

The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

CERN Technical Training 2006: WBTechT offers online training

CERN Multimedia

Davide Vitè

2006-01-01

The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

A new LabVIEW interface for MDSplus

International Nuclear Information System (INIS)

Manduchi, G.; De Marchi, E.; Mandelli, A.

2013-01-01

Highlights: ► Integration object oriented data access layer in LabVIEW. ► A new component of the MDSplus data acquisition package. ► A new approach in the graphical presentation of data acquisition systems. -- Abstract: The paper presents a new interface providing full integration of MDSplus in LabVIEW, based on the recent features of MDSplus, in particular, data streaming, multithreading and Object Oriented interface. Data streaming support fits into the data driven concept of LabVIEW and multithreading is a native concept in LabVIEW. The object oriented interface of MDSplus defines a set of classes which map specific functionality, such as Tree and TreeNode to represent pulse files and data items, respectively, and fits naturally into the LabVIEW Object Oriented programming interface (LVOOP) introduced in version 8.2. MDSplus objects have been mapped onto LabVIEW objects, which act as wrappers to the underlying MDSplus object instance. This approach allows exporting the full MDSplus functionality into LabVIEW retaining the language-independent system view provided by the MDSplus object oriented interface

A new LabVIEW interface for MDSplus

Energy Technology Data Exchange (ETDEWEB)

Manduchi, G., E-mail: gabriele.manduchi@igi.cnr.it [Consorzio RFX, Euratom-ENEA Association, Padova (Italy); De Marchi, E. [Department of Information Engineering, Padova University (Italy); Mandelli, A. [National Instruments (Italy)

2013-10-15

Highlights: ► Integration object oriented data access layer in LabVIEW. ► A new component of the MDSplus data acquisition package. ► A new approach in the graphical presentation of data acquisition systems. -- Abstract: The paper presents a new interface providing full integration of MDSplus in LabVIEW, based on the recent features of MDSplus, in particular, data streaming, multithreading and Object Oriented interface. Data streaming support fits into the data driven concept of LabVIEW and multithreading is a native concept in LabVIEW. The object oriented interface of MDSplus defines a set of classes which map specific functionality, such as Tree and TreeNode to represent pulse files and data items, respectively, and fits naturally into the LabVIEW Object Oriented programming interface (LVOOP) introduced in version 8.2. MDSplus objects have been mapped onto LabVIEW objects, which act as wrappers to the underlying MDSplus object instance. This approach allows exporting the full MDSplus functionality into LabVIEW retaining the language-independent system view provided by the MDSplus object oriented interface.

Training of technical staff and technical staff managers

International Nuclear Information System (INIS)

Moody, G.F.

1991-01-01

The purpose of Technical Staff and Technical Staff Managers training is to provide job skills enhancement to individuals selected to fill key technical positions within a nuclear utility. This training is unique in that unlike other training programs accredited by the National Academy for Nuclear Training, it does not lead to specific task qualification. The problems encountered when determining the student population and curriculum are a direct result of this major difference. Major problems encountered are determining who should attend the training, what amount of training is necessary and sufficient, and how to obtain the best feedback in order to effect substantive program improvements. These topics will be explored and possible solutions discussed

Technical training: places available

CERN Multimedia

2014-01-01

If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

Technical training: places available

CERN Document Server

2013-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

Technical training - places available

CERN Document Server

2013-01-01

If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

Technical training: places available

CERN Multimedia

2014-01-01

If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

Technical training: places available

CERN Multimedia

2013-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

Technical training: WBTechT offers online training

CERN Multimedia

Davide Vitè

2006-01-01

The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal, or the WBTechT information page at http://www.cern.ch/TechnicalTraining Contact: Technical.Training@cern.ch or your DTO to find out more information.

Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on April 1st, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while ...

An Archival Research Comparing Learning Effectiveness and Training Transfer Perceptions between Classroom Technical Training and Synchronous Online Technical Training

Science.gov (United States)

Jordan, Charles L.

2016-01-01

Synchronous online training has become one of the preferred training modes for organizations. Despite organizations increasing their use of online training, there is still little data to confirm that synchronous online technical training is as effective as classroom technical training for training transfer. Although learning effectiveness between…

Technical Training: Places available

CERN Document Server

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 7.9.2004 Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Framework : 13 - 17.9.2004 (5 days) Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) ...

TECHNICAL TRAINING: PLACES AVAILABLE

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Basics 1 : 22 - 24.3.2004 (3 days) Oracle 9i : New Features for Developers : 22 - 24.3.2004 (3 days) Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW hands-on (E) : 20.4.2004 (afternoon, free of charge) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Word XP - niveau 1 : 10 & 11.5.2004 (2 jours) Word XP - niveau 2 : 24 & 25.5.2004 (2 jours) If you wish to participate in one of these courses, pleas...

INDOT Technical Training Plan : [Technical Summary

Science.gov (United States)

2012-01-01

A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

LabVIEW Real-Time

CERN Multimedia

CERN. Geneva; Flockhart, Ronald Bruce; Seppey, P

2003-01-01

With LabVIEW Real-Time, you can choose from a variety of RT Series hardware. Add a real-time data acquisition component into a larger measurement and automation system or create a single stand-alone real-time solution with data acquisition, signal conditioning, motion control, RS-232, GPIB instrumentation, and Ethernet connectivity. With the various hardware options, you can create a system to meet your precise needs today, while the modularity of the system means you can add to the solution as your system requirements grow. If you are interested in Reliable and Deterministic systems for Measurement and Automation, you will profit from this seminar. Agenda: Real-Time Overview LabVIEW RT Hardware Platforms - Linux on PXI Programming with LabVIEW RT Real-Time Operating Systems concepts Timing Applications Data Transfer

Programming Arduino with LabVIEW

CERN Document Server

Schwartz, Marco

2015-01-01

If you already have some experience with LabVIEW and want to apply your skills to control physical objects and make measurements using the Arduino sensor, this book is for you. Prior knowledge of Arduino and LabVIEW is essential to fully understand the projects detailed in this book.

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 11.7.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS – Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E LabVIEW: Working efficiently with LabWIEW 8 8 18.09.06 E PCAD Schémas ? Introduction 16 21-22.09.06 F PCAD PCB - Introduction  24 27-29.09.06 F C++ for Particle Physicists ...

Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook ? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training course for Microsoft Applications. The next session will take place on February 26, Thursday morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while ...

A Labview Based Leakage Current Monitoring System For HV Insulators

Directory of Open Access Journals (Sweden)

N. Mavrikakis

2015-10-01

Full Text Available In this paper, a Labview based leakage current monitoring system for High Voltage insulators is described. The system uses a general purpose DAQ system with the addition of different current sensors. The DAQ system consists of a chassis and hot-swappable modules. Through the proper design of current sensors, low cost modules operating with a suitable input range can be employed. Fully customizable software can be developed using Labview, allowing on-demand changes and incorporation of upgrades. Such a system provides a low cost alternative to specially designed equipment with the added advantage of maximum flexibility. Further, it can be modified to satisfy the specifications (technical and economical set under different scenarios. In fact, the system described in this paper has already been installed in the HV Lab of the TEI of Crete whereas a variation of it is currently in use in TALOS High Voltage Test Station.

Technical Training for Managers.

Science.gov (United States)

Haverland, Edgar M.

The question has arisen as to what kind of information a manager without extensive technical training needs to learn to supervise effectively. For example, the Nike Hercules fire control platoon leader, usually an officer in his first active duty assignment, seldom has had extensive technical training. Yet he is responsibile for the…

Enseignement technique/Technical Training

CERN Multimedia

1998-01-01

Conception électronique/Electronic Design - Conception assistée par ordinateur/Computer-Aided Design - PCAD13 CADENCE - LabVIEW - Automatisme et mesures/Automation & Measures - Fieldbuses/Divers/Miscellaneous

Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook ? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training course for Microsoft Applications. The next sessions will take place on the 19 and 26 February (Thursday mornings), with 8 participants at most. Course sessions will be self-paced and self-directed, with participants...

Experiential Learning of Digital Communication Using LabVIEW

Science.gov (United States)

Zhan, Wei; Porter, Jay R.; Morgan, Joseph A.

2014-01-01

This paper discusses the design and implementation of laboratories and course projects using LabVIEW in an instrumentation course. The pedagogical challenge is to enhance students' learning of digital communication using LabVIEW. LabVIEW was extensively used in the laboratory sessions, which better prepared students for the course projects. Two…

CERN Technical Training 2005: WBTechT offers online training

CERN Multimedia

Davide Vitè

2005-01-01

The 2005 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information.

Automatic creation of LabVIEW network shared variables

International Nuclear Information System (INIS)

Kluge, T.; Schroeder, H.

2012-01-01

We are in the process of preparing the LabVIEW controlled system components of our Solid State Direct Drive experiments for the integration into a Supervisory Control And Data Acquisition (SCADA) or distributed control system. The predetermined route to this is the generation of LabVIEW network shared variables that can easily be exported by LabVIEW to the SCADA system using OLE for Process Control (OPC) or other means. Many repetitive tasks are associated with the creation of the shared variables and the required code. We are introducing an efficient and inexpensive procedure that automatically creates shared variable libraries and sets default values for the shared variables. Furthermore, LabVIEW controls are created that are used for managing the connection to the shared variable inside the LabVIEW code operating on the shared variables. The procedure takes as input an XML spread-sheet defining the required input. The procedure utilizes XSLT and LabVIEW scripting. In a later state of the project the code generation can be expanded to also create code and configuration files that will become necessary in order to access the shared variables from the SCADA system of choice. (authors)

CERN Technical Training : Vista !

CERN Multimedia

HR Department

2009-01-01

Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual session of this course will take place on 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

CERN Technical Training : Vista !

CERN Multimedia

HR Department

2008-01-01

Are you running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

CERN Technical Training : Vista !

CERN Multimedia

HR Department

2008-01-01

You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

CERN Technical Training : Vista !

CERN Multimedia

HR Department

2008-01-01

Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

CERN Technical Training : Vista !

CERN Multimedia

HR Department

2008-01-01

You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced using Windows XP. The next bilingual sessions of this course will take place on December 12, 2008 and January 30, 2009. Register using our catalogue : http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) Technical Training Monique Duval - Tel.74924 technical.training@cern.ch

CERN Technical Training 2007: IT3T - IT Technical Training Tutorials (Autumn 2007)

CERN Multimedia

2007-01-01

CERN Technical Training and the Internet Services group of the IT department (IT/IS) are jointly organizing a series of free tutorials, addressing some topics of common interest: the IT Technical Training Tutorials (IT3T). The first IT3T series will be offered in October 2007, in French, with the following schedule: IT3T/2007/1 "Introduction to Collaboration Workspaces using SharePoint", October 23rd , 14:30-16:00, Alexandre Lossent IT3T/2007/2 "What is new in Office 2007", October 25th, 14:30-15:30, Emmanuel Ormancey IT3T/2007/3 "Working with Windows Vista at CERN", October 30th, 14:30-15:30, Michal Kwiatek IT3T/2007/4 "Read your mail and more with Outlook 2007", November 1st, 14:30-15:30, Sebastien Dellabella All IT Technical Training Tutorials will take place in the Training Centre Auditorium (building 593, room 11), at 14h30. The tutorials are free of charge, but separate registration to each is required. Participation to any of the tutorials is open: attendance to any ...

Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The Instructor-led CERN WBTechT course for Microsoft Applications is a new type of course offered in the framework of the Technical Training Programme, combining instructor-led and computer-based multimedia training, also known as "blended learning". The next sessions will take place on the 12, 19, and 26 February (Thursday mornings), and subsequent sessions will be organised following demand. Based on the new ElementK 2004 CERN WBTechT catalogue, courses will be self-paced and self-d...

LabVIEW A Developer's Guide to Real World Integration

CERN Document Server

Fairweather, Ian

2011-01-01

LabVIEW(t) has become one of the preeminent platforms for the development of data acquisition and data analysis programs. LabVIEW(t): A Developer's Guide to Real World Integration explains how to integrate LabVIEW into real-life applications. Written by experienced LabVIEW developers and engineers, the book describes how LabVIEW has been pivotal in solving real-world challenges. Each chapter is self-contained and demonstrates the power and simplicity of LabVIEW in various applications, from image processing to solar tracking systems. Many of the chapters explore how exciting new technologies c

LabVIEW Library to EPICS Channel Access

CERN Document Server

Liyu, Andrei; Thompson, Dave H

2005-01-01

The Spallation Neutron Source (SNS) accelerator systems will deliver a 1.0 GeV, 1.4 MW proton beam to a liquid mercury target for neutron scattering research. The accelerator complex consists of a 1 GeV linear accelerator, an accumulator ring and associated transport lines. The SNS diagnostics platform is PC-based and will run Windows for its OS and LabVIEW as its programming language. Data acquisition hardware will be based on PCI cards. There will be about 300 rack-mounted computers. The Channel Access (CA) protocol of the Experimental Physics and Industrial Control System (EPICS) is the SNS control system communication standard. This paper describes the approaches, implementation, and features of LabVIEW library to CA for Windows, Linux, and Mac OS X. We also discuss how the library implements the asynchronous CA monitor routine using LabVIEW's occurrence mechanism instead of a callback function (which is not available in LabVIEW). The library is used to acquire accelerator data and applications have been ...

TECHNICAL TRAINING: Places available**

CERN Multimedia

2003-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) CLEAN-2002 - Travailler en salle propre : 23.11.2004 (après-midi, cours gratuit) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) ENSEIGNEMENT ...

Technical training: Places available

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) Advanced aspects of PERL 5 : 10.12.2004 (1 day) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) CLEAN-2002 - Travailler en salle propre : 23.11.2004 (après-midi, cours gratuit) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) PCAD Sch&eac...

Application of LabVIEW on Ionization Chamber to Measurement Radiation

International Nuclear Information System (INIS)

Kerdchockchai, P.; Soodprasert, T.; Hoonnivathana, E.; Naemchnthara, P.; Limsuwan, P.; Naemchanthara, K.

2014-01-01

The purpose of this research was to apply LabVIEW program to control an ionization chamber. LabVIEW was used to compose a block diagram and front panel. The block diagram was programmed to be controlled by the front panel. Radiation dose of Cs -137 at 1.00, 1.50, 2.00, 2.50, 3.00 and 4.00 meter were compared from LabViEW and manual system. The results show that the different percentages of Pb filter of thickness 0, 20 and 39 mm are 0.68, 0.68 and 0.48, respectively. This experiment results indicated that the LabVIEW can be used in assisting radiation measurement. Furthermore, by controlling the ionization chamber by LabVIEW, the radiation dose received by operator is reduced.

Technical Training: C++ for Particle Physicists

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 8 - 12 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page : http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' ...

Technical Training: C++ for Particle Physicists

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 8 - 12 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page: http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' c...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

Technical Training: Places Available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

Technical Training: Places available

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 day...

LabVIEW Interface for PCI-SpaceWire Interface Card

Science.gov (United States)

Lux, James; Loya, Frank; Bachmann, Alex

2005-01-01

This software provides a LabView interface to the NT drivers for the PCISpaceWire card, which is a peripheral component interface (PCI) bus interface that conforms to the IEEE-1355/ SpaceWire standard. As SpaceWire grows in popularity, the ability to use SpaceWire links within LabVIEW will be important to electronic ground support equipment vendors. In addition, there is a need for a high-level LabVIEW interface to the low-level device- driver software supplied with the card. The LabVIEW virtual instrument (VI) provides graphical interfaces to support all (1) SpaceWire link functions, including message handling and routing; (2) monitoring as a passive tap using specialized hardware; and (3) low-level access to satellite mission-control subsystem functions. The software is supplied in a zip file that contains LabVIEW VI files, which provide various functions of the PCI-SpaceWire card, as well as higher-link-level functions. The VIs are suitably named according to the matching function names in the driver manual. A number of test programs also are provided to exercise various functions.

10 CFR 440.23 - Oversight, training, and technical assistance.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Oversight, training, and technical assistance. 440.23... PERSONS § 440.23 Oversight, training, and technical assistance. (a) The Secretary and the appropriate..., directly or indirectly, training and technical assistance to any grantee or subgrantee. Such training and...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EMAG-2004 - Electromagnetic Design and Mathematical Optimization in Magnet Technology: 4- 14.4.2005 (8 x 3h) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermediate 1: 11 - 13.4.2005 (3 days) ACCESS 2003 - Level 2 - ECDL AM5: 13 & 14.4.2005 (2 days) LabVIEW Intermediate 2: 14 & 15.4.2005 (2 days) PowerPoint 2003 (F) : 18.4.2005 (1 jour) Joint PVSS JCOP Framework : 25 - 29.4.2005 (5 days) WORD 2003 - niveau 1 : 2 & 3.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2002 - niveau 1 : 11, 12, 18 & 19.5.2005 (4 jour...

Technical training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 13.6.2006 (June-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue LabVIEW Base 2 16 22-23.06.06 F FileMaker - niveau 1 16 26-27.06.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-30.06.06 F Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E Introduction à Dreamweaver MX 16 26-27.07.06 F ANSYS DesignModeler 16 29-30.08.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 20...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 9.5.2006 (May-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: find out the curren Hours Date Language LabVIEW Application Development 24 15-17.05.06 E LabVIEW Advanced Programming 16 18-19.05.06 E PERL 5: Advanced Aspects 8 18.05.06 E Technique du vide 16 18-19.05.06 F FileMaker - niveau 2 16 11-12.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 F Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE 16 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E Python: Hands-on Introduction 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) LabVIEW Basics I:  23 - 25.1.2006 (3 days) C++ Programming Advanced - Traps and Pitfalls: 24 - 27.1.2006 (4 days) LabVIEW Basics II:  26 - 27.1.2006 (2 days) Joint PVSS-JCOP Framework: 30.1 - 3.2.2006 (5 days, free of charge) Finite State Machines in the JCOP Framework : ...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1: 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) LabVIEW base 1/basics 1 : 31.1 - 1.2.2005 (2 j size="2">LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: ...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 1/basics 1 : 31.1 - 2.2.2005 (3 jours/3 days - langue à décider/language to be decided) LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCESS 2003 - Level 2 - ECDL AM5: 5 - 8.7.2005 (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 8.7.2005 (aftern...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 6.7.2005 (morning) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 7.7.2005 (morning) OUTLOOK (Short Course III) - Meetings and Delegation: 8.7.2005 (morning) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format y...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The CERN EDMS for Engineers : 6.10.2004 (1 day) FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) FrontPage 2003 - niveau 2 : 18 &a...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) FrontPage 2003 - niveau 2 : 18 & 19.11.2004 (2 jours) Word 2003 - niveau 1 : 22 &a...

Integration of LCoS-SLM and LabVIEW based software to simulate fundamental optics, wave optics, and Fourier optics

Science.gov (United States)

Lyu, Bo-Han; Wang, Chen; Tsai, Chun-Wei

2017-08-01

Jasper Display Corp. (JDC) offer high reflectivity, high resolution Liquid Crystal on Silicon - Spatial Light Modulator (LCoS-SLM) which include an associated controller ASIC and LabVIEW based modulation software. Based on this LCoS-SLM, also called Education Kit (EDK), we provide a training platform which includes a series of optical theory and experiments to university students. This EDK not only provides a LabVIEW based operation software to produce Computer Generated Holograms (CGH) to generate some basic diffraction image or holographic image, but also provides simulation software to verity the experiment results simultaneously. However, we believe that a robust LCoSSLM, operation software, simulation software, training system, and training course can help students to study the fundamental optics, wave optics, and Fourier optics more easily. Based on these fundamental knowledges, they could develop their unique skills and create their new innovations on the optoelectronic application in the future.

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Science.gov (United States)

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

Technical Training: CLEAN-2002: Working in a Cleanroom

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training Programme: Learning for the LHC! CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific ...

Technical training: places available

CERN Document Server

2013-01-01

If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Introduction to VHDL 21-Feb-13 to 22-Feb-13 2 days English Mechanical design Next Session Duration Language ANSYS - Introduction à ANSYS Mechanical APDL 04-Feb-13 to 07-Feb-13 4 days English Applications de la cotation fonctionnelle et du langage ISO 06-Feb-13 to 08-Feb-13 2 days 4 hours French CATIA V5 – Surfacique 14-Jan-13 to 15-Jan-13 2 days French Office software Next Session Duration Language ACCESS 2010 - niveau 2 : ECDL 06-Feb-13 to 07-Feb-13 2 days French Dreamweaver CS3 - Niveau 1 14-Jan-13 to 15-Jan-13 2 d...

Connect high speed analog-digital converter with EPICS based on LabVIEW

International Nuclear Information System (INIS)

Wang Wei; Chi Yunlong

2008-01-01

This paper introduce a method to connect high speed analog-digital converter (ADC212/100) with EPICS on Windows platform using LabVIEW. We use labVIEW to communicate with the converter, then use interface sub-VIs between LabVIEW and EPICS to access the EPICS IOC by Channel Access (CA). For the easy use graph programming language of LabVIEW, this method could shorten the develop period and reduce manpower cost. (authors)

Technical Training: CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on 7 September, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the app...

Technical Training: CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ...

34 CFR 300.119 - Technical assistance and training activities.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Technical assistance and training activities. 300.119... Technical assistance and training activities. Each SEA must carry out activities to ensure that teachers and....114; and (b) Are provided with technical assistance and training necessary to assist them in this...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) Finite State Machines in the JCOP Framework: 13 - 15.12.2005 (3 days) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) PCAD PCB - Introduction : 14 - 16.12.2005 (3 jours) AutoCAD 2006 - niveau 1 : 19, 20, 24 & 25.1.2006 (4 jours) LabVIEW Basics I:  23 - 25.1.2006 (3 days) C++ Programming Advanced - Traps and Pitfalls: 24 - 27.1.2006 (4 days) STEP7 Programming Level 1: 24 - 27.1.2006 (4 days) LabVIEW Basics II:  26 - 27.1.2006 (2 days) AutoCAD Mechanical 2006 : 30 - 31.1.2006 (2 jours; suite du cours AutoCAD 2006 - niveau 1) Joint PVS...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 27.6.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E AutoCAD 2006 - niveau 1 32 14-21.09.06 F LabVIEW Basics 2 ...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (9 demi-journées) LabVIEW base 1/basics 1 : 31.1 - 2.2.2005 (3 jours/3 days - langue à décider/language to be decided) LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 â...

Technical Training: Places available

CERN Multimedia

2006-01-01

Places available as of 21.3.2006 (March-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: find out the curren Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F Project Planning with MS-Project 16 9.05-6.06.06 E STEP7: niveau 1 32 9-12.05.06 E-F Oracle: Programming with PL/SQL 24 10-12.05.06 E FileMaker - niveau 2 16 11-12.05.06 F LabVIEW Application Development 24 15-17.05.06 E LabVIEW Advanced Programming 16 18-19.05.06 E PERL 5: Advanced Aspects 8 18.05.06 E Technique du vide 16 18-19.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 F Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE 16 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its T...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 19.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 11-13.09.06 E ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E EXCEL 2003 (Short Course I) - HowTo... Work with formulae 3 15.09.06 E/F WORD 2003 (Short Course III) - HowTo... Work with long docu...

Interfacing LabVIEW With Instrumentation for Electronic Failure Analysis and Beyond

Science.gov (United States)

Buchanan, Randy K.; Bryan, Coleman; Ludwig, Larry

1996-01-01

The Laboratory Virtual Instrumentation Engineering Workstation (LabVIEW) software is designed such that equipment and processes related to control systems can be operationally lined and controlled by the use of a computer. Various processes within the failure analysis laboratories of NASA's Kennedy Space Center (KSC) demonstrate the need for modernization and, in some cases, automation, using LabVIEW. An examination of procedures and practices with the Failure Analaysis Laboratory resulted in the conclusion that some device was necessary to elevate the potential users of LabVIEW to an operational level in minimum time. This paper outlines the process involved in creating a tutorial application to enable personnel to apply LabVIEW to their specific projects. Suggestions for furthering the extent to which LabVIEW is used are provided in the areas of data acquisition and process control.

Technical Training: C++ for Particle Physicists

CERN Multimedia

Monique Duval

2005-01-01

Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 7-11 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page : http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' course and giving their name, CERN ID number, the Team account number to which the course fee should be charged, and VERY IMPORTANTLY an email address to which an invitation to the course can be sent. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

TECHNICAL TRAINING SEMINAR

CERN Multimedia

Davide Vitè

2002-01-01

Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

System of technical vision for autonomous unmanned aerial vehicles

Science.gov (United States)

Bondarchuk, A. S.

2018-05-01

This paper is devoted to the implementation of image recognition algorithm using the LabVIEW software. The created virtual instrument is designed to detect the objects on the frames from the camera mounted on the UAV. The trained classifier is invariant to changes in rotation, as well as to small changes in the camera's viewing angle. Finding objects in the image using particle analysis, allows you to classify regions of different sizes. This method allows the system of technical vision to more accurately determine the location of the objects of interest and their movement relative to the camera.

Software Development for the Hobby-Eberly Telescope's Segment Alignment Maintenance System using LABView

Science.gov (United States)

Hall, Drew P.; Ly, William; Howard, Richard T.; Weir, John; Rakoczy, John; Roe, Fred (Technical Monitor)

2002-01-01

The software development for an upgrade to the Hobby-Eberly Telescope (HET) was done in LABView. In order to improve the performance of the HET at the McDonald Observatory, a closed-loop system had to be implemented to keep the mirror segments aligned during periods of observation. The control system, called the Segment Alignment Maintenance System (SAMs), utilized inductive sensors to measure the relative motions of the mirror segments. Software was developed in LABView to tie the sensors, operator interface, and mirror-control motors together. Developing the software in LABView allowed the system to be flexible, understandable, and able to be modified by the end users. Since LABView is built using block diagrams, the software naturally followed the designed control system's block and flow diagrams, and individual software blocks could be easily verified. LABView's many built-in display routines allowed easy visualization of diagnostic and health-monitoring data during testing. Also, since LABView is a multi-platform software package, different programmers could develop the code remotely on various types of machines. LABView s ease of use facilitated rapid prototyping and field testing. There were some unanticipated difficulties in the software development, but the use of LABView as the software "language" for the development of SAMs contributed to the overall success of the project.

GENDER PARTICIPATION IN TECHNICAL TRAINING INSTITUTIONS

African Journals Online (AJOL)

The paper focuses on skill training opportunities for females in Technical Education Programmes (TEP) in Kenya. In Africa, labour markets have become so competitive that females need to be assisted to enter such markets. Expanding skill-training opportunities for females in training institutions could meet this demand.

The implement of the interface between EPICS and LabVIEW

International Nuclear Information System (INIS)

Liu Jia; Wang Chunhong

2009-01-01

The control system of BEPCII (Beijing Electron Positron Collider) is based on EPICS (Experimental Physics and Industrial Control System). LabVIEW is often used to develop data acquisition system on Windows platform. EPICS IOC version 3.14 or later, can be currently running on windows. The SharedMemory developed by SNS (Spallation Neutron Source) can implement the interface between Windows IOC and LabVIEW. The paper describes the method how to use SharedMemory and a application of magnet measurement system, so that LabVIEW and EPICS can share data each other. (authors)

Application of DICOM Standard in LabVIEW Environment

Directory of Open Access Journals (Sweden)

Dušan KONIAR

2008-01-01

Full Text Available DICOM is the world standard for picture archiving and communication in medicine. Development system LabVIEW based on graphical programming is primary designed for virtual instrumentation, it offers many tools and operators for image processing and analysis, but it does not directly support the work with DICOM standard. The article deals with possibility of importing native DICOM files to LabVIEW and work with them.

Environment monitoring using LabVIEW

International Nuclear Information System (INIS)

Hawtree, J.

1995-01-01

A system has been developed for electronically recording and monitoring temperature, humidity, and other environmental variables at the Silicon Detector Facility located in Lab D. The data is collected by LabVIEW software, which runs in the background on an Apple Macintosh. The software is completely portable between Macintosh, MS Windows, and Sun platforms. The hardware includes a Macintosh with 8 MB of RAM; an external ADC-1 analog-to-digital converter that uses a serial port; LabVIEW software; temperature sensors; humidity sensors; and other voltage/current sensing devices. ADC values are converted to ASCII strings and entered into files which are read over Ethernet. Advantages include automatic logging, automatic recovery after power interruptions, and the availability of stand-alone applications for other locations with inexpensive software and hardware

Cognitive training for technical and non-technical skills in robotic surgery: a randomised controlled trial.

Science.gov (United States)

Raison, Nicholas; Ahmed, Kamran; Abe, Takashige; Brunckhorst, Oliver; Novara, Giacomo; Buffi, Nicolò; McIlhenny, Craig; van der Poel, Henk; van Hemelrijck, Mieke; Gavazzi, Andrea; Dasgupta, Prokar

2018-05-07

To investigate the effectiveness of motor imagery (MI) for technical skill and non-technical skill (NTS) training in minimally invasive surgery (MIS). A single-blind, parallel-group randomised controlled trial was conducted at the Vattikuti Institute of Robotic Surgery, King's College London. Novice surgeons were recruited by open invitation in 2015. After basic robotic skills training, participants underwent simple randomisation to either MI training or standard training. All participants completed a robotic urethrovesical anastomosis task within a simulated operating room. In addition to the technical task, participants were required to manage three scripted NTS scenarios. Assessment was performed by five blinded expert surgeons and a NTS expert using validated tools for evaluating technical skills [Global Evaluative Assessment of Robotic Skills (GEARS)] and NTS [Non-Technical Skills for Surgeons (NOTSS)]. Quality of MI was assessed using a revised Movement Imagery Questionnaire (MIQ). In all, 33 participants underwent MI training and 29 underwent standard training. Interrater reliability was high, Krippendorff's α = 0.85. After MI training, the mean (sd) GEARS score was significantly higher than after standard training, at 13.1 (3.25) vs 11.4 (2.97) (P = 0.03). There was no difference in mean NOTSS scores, at 25.8 vs 26.4 (P = 0.77). MI training was successful with significantly higher imagery scores than standard training (mean MIQ score 5.1 vs 4.5, P = 0.04). Motor imagery is an effective training tool for improving technical skill in MIS even in novice participants. No beneficial effect for NTS was found. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

INDOT Technical Training Plan

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations : for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and E...

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

Science.gov (United States)

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

CERN Technical Training Programme: Learning for the LHC!

CERN Multimedia

2003-01-01

In collaboration with AS and AC divisions, the Technical Training Programme is launching EVM Hands-on Tutorials specifically designed for those people involved in the current EVM for LHC exercise. The goal of the EVM Hands-on Training Sessions is to provide insight in Earned Value Management as implemented at CERN. Following this course will enable you to understand the EVM methodology, the tools used at CERN, the procedures used for the data-collection and data-reporting and assist you in analysing cost & schedule variances. The course is an intensive 2-hour 'hands-on' training session. If you are interested in this course, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training web pages: http://www.cern.ch/TechnicalTraining/

CERN Technical Training Programme: Learning for the LHC !

CERN Multimedia

2003-01-01

In collaboration with AS and AC divisions, the Technical Training Programme is launching EVM Hands-on Tutorials specifically designed for those people involved in the current EVM for LHC exercise. The goal of the EVM Hands-on Training Sessions is to provide insight in Earned Value Management as implemented at CERN. Following this course will enable you to understand the EVM methodology, the tools used at CERN, the procedures used for the data-collection and data-reporting and assist you in analysing cost & schedule variances. The course is an intensive 2-hour 'hands-on' training session. If you are interested in this course, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training web pages: http://www.cern.ch/TechnicalTraining/

Implementation of Siemens USS protocol into LabVIEW.

Science.gov (United States)

Hosek, P; Diblik, M

2011-10-01

This article gives basic overview of the USS protocol as a communication interface to drive Siemens frequency inverters. It presents our implementation of this protocol into LabVIEW, as there was permanent demand from the community of the users to have native LabVIEW implementation of the USS protocol. It also states encountered problems and their solutions. Copyright © 2011 Society for Laboratory Automation and Screening. Published by Elsevier Inc. All rights reserved.

Arduino-Based embedded systems interfacing, simulation, and LabVIEW GUI

CERN Document Server

Singh, Rajesh; Singh, Bhupendra; Choudhury, Sushabhan

2018-01-01

Arduino is an open-source electronics platform based on easy-to-use hardware and software while LabVIEW is a graphical programming telling how to connect functions and work with a variety of datatypes when constructing applications.This book will help beginners to get started with Arduino-based embedded systems including essential know-how of the programming and interfacing of the devices. Book includes programming and simulation of Arduino-based projects and interfacing with LabVIEW, based on practical case studies. The book comprises of total twenty five chapters with description, working model of LabVIEW and programming with Arduino IDE.

CERN Technical Training: Signal Processor

CERN Multimedia

HR Department

2009-01-01

A new training is going to be held at CERN on the ADSP SHARC Family. The "System Development and Programming with the Analog Devices’ SHARC Family" course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your que...

CERN Technical Training 2005: "Introduction to ANSYS"

CERN Multimedia

Davide Vitè

2005-01-01

Course Session (28.6 - 1.7.2005) The following course session is scheduled in the framework of the CERN Technical Training Programme 2005, and in collaboration with CAD-FEM AG (CH): Introduction to ANSYS (course in English): 28.6 - 1.7.2005 (4 days, 6 places available, estimated cost: approx. 1'200.- CHF per person). The price quoted above may vary, depending on the number of confirmed participants. If you are interested in attending the above course session, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at http://www.cern.ch/TechnicalTraining/ under "Places Available", with the detailed course programmes. Due to the short notice, please send at the same time an e-mail to Technical.Training@cern.ch, announcing your registration. The complete training offer of ANSYS courses at CERN can be found at the same website, in the Mechanical Design curriculum, Finite Element Methods section. Organiser: Davide Vit&egr...

CERN Technical Training: Digital Signal Processors

CERN Multimedia

HR Department

2009-01-01

A new training is going to be held at CERN on the ADSP SHARC Family. The “System Development and Programming with the Analog Devices' SHARC Family” course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or conta...

Simulation and visualization of fundamental optics phenomenon by LabVIEW

Science.gov (United States)

Lyu, Bohan

2017-08-01

Most instructors teach complex phenomenon by equation and static illustration without interactive multimedia. Students usually memorize phenomenon by taking note. However, only note or complex formula can not make user visualize the phenomenon of the photonics system. LabVIEW is a good tool for in automatic measurement. However, the simplicity of coding in LabVIEW makes it not only suit for automatic measurement, but also suitable for simulation and visualization of fundamental optics phenomenon. In this paper, five simple optics phenomenon will be discuss and simulation with LabVIEW. They are Snell's Law, Hermite-Gaussian beam transverse mode, square and circular aperture diffraction, polarization wave and Poincare sphere, and finally Fabry-Perrot etalon in spectrum domain.

Measurement system for high-sensitivity LIBS analysis using ICCD camera in LabVIEW environment

International Nuclear Information System (INIS)

Zaytsev, S M; Popov, A M; Zorov, N B; Labutin, T A

2014-01-01

A measurement system based on ultrafast (up to 10 ns time resolution) intensified CCD detector ''Nanogate-2V'' (Nanoscan, Russia) was developed for high-sensitivity analysis by Laser-Induced Breakdown Spectrometry (LIBS). LabVIEW environment provided a high level of compatibility with variety of electronic instruments and an easy development of user interface, while Visual Studio environment was used for creation of LabVIEW compatible dll library with the use of ''Nanogate-2V'' SDK. The program for camera management and laser-induced plasma spectra registration was created with the use of Call Library Node in LabVIEW. An algorithm of integration of the second device ADC ''PCI-9812'' (ADLINK) to the measurement system was proposed and successfully implemented. This allowed simultaneous registration of emission and acoustic signals under laser ablation. The measured resolving power of spectrometer-ICCD system was equal to 12000 at 632 nm. An electron density of laser plasma was estimated with the use of H-α Balmer line. Steel spectra obtained at different delays were used for selection of the optimal conditions for manganese analytical signal registration. The feature of accumulation of spectra from several laser pulses was shown. The accumulation allowed reliable observation of silver signal at 328.07 nm in the LIBS spectra of soil (C Ag = 4.5 ppm). Finally, the correlation between acoustic and emission signals of plasma was found. Thus, technical possibilities of the developed LIBS system were demonstrated both for plasma diagnostics and analytical measurements

Frequency spectrum analysis of 252Cf neutron source based on LabVIEW

International Nuclear Information System (INIS)

Mi Deling; Li Pengcheng

2011-01-01

The frequency spectrum analysis of 252 Cf Neutron source is an extremely important method in nuclear stochastic signal processing. Focused on the special '0' and '1' structure of neutron pulse series, this paper proposes a fast-correlation algorithm to improve the computational rate of the spectrum analysis system. And the multi-core processor technology is employed as well as multi-threaded programming techniques of LabVIEW to construct frequency spectrum analysis system of 252 Cf neutron source based on LabVIEW. It not only obtains the auto-correlation and cross correlation results, but also auto-power spectrum,cross-power spectrum and ratio of spectral density. The results show that: analysis tools based on LabVIEW improve the fast auto-correlation and cross correlation code operating efficiency about by 25% to 35%, also verify the feasibility of using LabVIEW for spectrum analysis. (authors)

Technical Training seminar: Texas Instruments

CERN Multimedia

2006-01-01

Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) POWER - A short approach to Texas Instruments power products Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to the SWIFT software FPGA + CPLD power solutions WIRELESS / CHIPCON Decision criteria when choosing a RF platform Introduction to Texas Instruments wireless products: standardized platforms proprietary platforms ( 2.4 GHz / sub 1 GHz) development tools Antenna design: example for 2.4 GHz questions, discussion Industrial partners: Robert Medioni, François Caloz / Spoerle Electronic, CH-1440 Montagny (VD), Switzerland Phone: +41 24 447 0137, email: RMedioni@spoerle.com, http://www.spoerle.com Language: English. Free s...

An assessment of individualized technical ear training for audio production.

Science.gov (United States)

Kim, Sungyoung

2015-07-01

An individualized technical ear training method is compared to a non-individualized method. The efficacy of the individualized method is assessed using a standardized test conducted before and after the training period. Participants who received individualized training improved better than the control group on the test. Results indicate the importance of individualized training for acquisition of spectrum-identification and spectrum-matching skills. Individualized training, therefore, should be implemented by default into technical ear training programs used in audio production industry and education.

75 FR 13521 - Centers for Independent Living Program-Training and Technical Assistance

Science.gov (United States)

2010-03-22

... DEPARTMENT OF EDUCATION Centers for Independent Living Program--Training and Technical Assistance... for Independent Living Program--Training and Technical Assistance (CIL-TA program). The Assistant... appropriated for the CIL program to provide training and technical assistance to CILs, agencies eligible to...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 - 8.7.2004 (3 jours) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING...

Labview virtual instruments for calcium buffer calculations.

Science.gov (United States)

Reitz, Frederick B; Pollack, Gerald H

2003-01-01

Labview VIs based upon the calculator programs of Fabiato and Fabiato (J. Physiol. Paris 75 (1979) 463) are presented. The VIs comprise the necessary computations for the accurate preparation of multiple-metal buffers, for the back-calculation of buffer composition given known free metal concentrations and stability constants used, for the determination of free concentrations from a given buffer composition, and for the determination of apparent stability constants from absolute constants. As implemented, the VIs can concurrently account for up to three divalent metals, two monovalent metals and four ligands thereof, and the modular design of the VIs facilitates further extension of their capacity. As Labview VIs are inherently graphical, these VIs may serve as useful templates for those wishing to adapt this software to other platforms.

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies ITIL Foundations (version 3) EXAMINATION\t13-DEC-10\t13-DEC-10\tEnglish\t1 hour Electronic design Cours de base Automation du bâtiment\t15-DEC-10\t17-DEC-10\tFrench\t3 jours Office software Sharepoint Collaboration Workspace\t13-DEC-10\t14-DEC-10\tEnglish\t2 days If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found here under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. CERN Technical Training courses are open only to members of the CERN per...

Design of LabVIEW based test system software for MDC electronics

International Nuclear Information System (INIS)

Xue Lin; Huazhong Normal Univ., Wuhan; Huang Guangming; Zhang Hongyu; Jiang Xiaoshan; Sheng Huayi; Zhuang Baoan

2006-01-01

This paper presents the design of Test System Software for MDC Electronics. The highly modular software, developed in LabVIEW and VC ++ 6.0, has been applied in hardware debugging and performance test. LabVIEW and its DLL calling mechanism are introduced briefly. Testing functions of the software, as well as its user interfaces, are described in detail. (authors)

CERN Technical Training - New courses available at CERN!

CERN Multimedia

HR Department

2010-01-01

1. - The “JavaScript for web development” is a 3 day course. This hands-on JavaScript training course provides the knowledge needed to design and develop dynamic web pages using JavaScript. It introduces students to JavaScript and how the language can be used to turn static HTML pages into dynamic, interactive web pages. Students will learn the syntax of the JavaScript language, the Document Object Model, form validation, cookies, how to create functions. This course is for Web programmers who want to learn how to make their Web pages more interactive by using JavaScript. The course will take place, in English, from 5 to 7 May 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop ...

Technical Training: C++ for Particle Physicists

CERN Multimedia

Monique Duval

2004-01-01

Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 15 - 19 November. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page: Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the 'C++ for Particle Physicists' course and giving their name, CERN ID number, the Team account number to which the course fee should be charged, and VERY IMPORTANTLY an email address to which an invitation to the course can be sent. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

Technical Training: C++ for Particle Physicists

CERN Multimedia

Monique Duval

2004-01-01

Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 15 - 19 November. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page. Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the 'C++ for Particle Physicists' course and giving their name, CERN ID number, the Team account number to which the course fee should be charged, and VERY IMPORTANTLY an email address to which an invitation to the course can be sent. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

A Nuclear Scale System Based on LabVIEW

International Nuclear Information System (INIS)

Liu Shixing; Gu Qindong

2009-01-01

Nuclear mass scales measure the weight of materials which absorb and attenuate the nuclear radiation when the low energy γ-ray through it and is a non-contact continuous measurement device with simple structure and reliable operation. LabVIEW as a graphical programming language is a standard data acquisition and instrument control software. Based on the principle of nuclear mass scale measuring system, monitoring software for nuclear scale system is designed using LabVIEW programming environment. Software architecture mainly composed of three basic modules which include the monitoring software, databases and Web services. It achieves measurement data acquisition, status monitoring, and data management and has networking functions. (authors)

CERN Technical Training Programme: Learning for the LHC !

CERN Multimedia

2003-01-01

CLEAN-2002: Working in a Cleanroom CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. If you are interested in CLEAN-2002, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training pages: http://www.cern.ch/TechnicalTraining/ The next session, in English, will be on Friday, 11 April 2003 (afternoon). Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

Training for Technical Assistants: Technical Assistance Program

Science.gov (United States)

1986-09-01

shortage of technical ptfesson until such time as English , "speking instructors might be trained, There. would be An aumcation of committed on-calI...12 hours in classroom Instruction, students in English as a Second nel Research and Development Computer.taught students Language. The program Is...hbeels "p.-ogram. A Iot ’ atar boiler arn tank heats týe food enroute to its destination. 1.0. A new tor of dust ptectleon to protect machine .perators

PCI bus data transmission system based on LabVIEW language

International Nuclear Information System (INIS)

Li Jingwei; Wu Jie

2013-01-01

Background: The traditional FPGA program is developed with HDL code, which will cost a lot of time and energy in writing and debugging the underlying code. Purpose: We want to use a new approach to develop FPGA program, which will greatly accelerate the FPGA development. And our system can also be compatible with NI (American National Instrument Company) CRIO case. Methods: We also choose FPGA as the core of hardware and use LabVIEW language (a graphical language) to develop FPGA program. Results: We realized a universal data interface platform by LabVIEW, which is different from the traditional FPGA development process using HDL. This system can provide many functions such as data processing, data IO and implementation of the PCI interface communication. Conclusions: FPGA program can also be developed by LabVIEW language, and it can achieve the corresponding data interface functions, and greatly reduce development time. (authors)

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES Advanced Python-Hands-on\t(English)\t07-09.07\t3 days MECHANICAL DESIGN ANSYS CFX\t(Français)\t28-31.07\t4 jours If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. CERN Technical Training courses are open only to members of the CERN personnel (staff members and fellows; associates, stude...

Study on the communication technology of instrument based on LabVIEW

International Nuclear Information System (INIS)

Jiang Wei; Lai Qinggui; Zhang Xiaobo

2012-01-01

The hardware and software structure of communication of universal instrument is discussed based on LabVIEW, the several realization of remote communication is compared too. In the control and measure system of LIA, using LabVIEW, the communication is realized among the plenty of instruments which have the various interfaces, in this paper the frame of hardware and software about instrument communication is showed. (authors)

Technical training: AXEL-2009 - Introduction to Particle Accelerators

CERN Multimedia

HR Department

2009-01-01

CERN Technical Training 2009: Learning for the LHC! AXEL-2009 is a course series on particle accelerators, given at CERN within the framework of the 2009 Technical Training Program. Known in the past as the PS Complex Operation Course (or the ‘PS Shutdown Course’), the general accelerator physics module as been organized since 2003 as a joint venture between the AB Department and Technical Training Service, and is open to a wider CERN community. The AXEL-2009 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is also open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge of accelerators. However, some basic knowledge of trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from 19 to 23 January 2009, and will be given i...

Technical Training: AXEL-2005 - Introduction to Particle Accelerators

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005: Learning for the LHC! AXEL-2005 is a course series on particle accelerators, given at CERN within the framework of the 2005 Technical Training Programme. Known in the past as the PS Complex Operation Course (or the 'PS Shutdown Course', now AB/OP), the general accelerator physics section is organised since 2003 as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2005 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course will be given in French on course supports in English; questions and answers possible in both languages. AXEL-2005 - I...

CERN Technical Training Programme: Learning for the LHC!

CERN Multimedia

CLEAN-2002: Working in a Cleanroom CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. If you are interested in CLEAN-2002, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training pages: http://www.cern.ch/TechnicalTraining/ The next session in French will be on Thursday, 4 September 2003 (afternoon), and in English on Thursday, 23 October 2003 (afternoon). Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

Technical training: AXEL-2012 - Introduction to Particle Accelerators

CERN Multimedia

HR Department

2011-01-01

CERN Technical Training 2012: Learning for the LHC! AXEL-2012 is a course series on particle accelerators, given at CERN within the framework of the Technical Training Program. Being part of BE Department’s Operation Group Shutdown Lecture series, the general accelerator physics module is organized since 2003 as a joint venture between the BE Department and Technical Training, and is open to a wider CERN community. The AXEL-2012 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from the 16th – 20th of January 2012, and given in English with ...

Technical training: AXEL-2011 - Introduction to Particle Accelerators

CERN Multimedia

HR Department

2010-01-01

CERN Technical Training 2011: Learning for the LHC! AXEL-2011 is a course series on particle accelerators, given at CERN within the framework of the 2011 Technical Training Program. As part of the BE Department’s Operation Group Shutdown Lecture series, the general accelerator physics module has been organized since 2003 as a joint venture between the BE Department and Technical Training, and is open to a wider CERN community. The AXEL-2011 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is also open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge of accelerators. However, some basic knowledge of trigonometry, matrices and differential equations, and some basic knowledge of magnetism would be an advantage. The series will be composed of 10 one-hour courses (Monday 10.01.2011 – Fri 14.01.2011, from 09:00 to 10:30 and from 14:00 to 15:...

Technical training: AXEL-2006 - Introduction to Particle Accelerators

CERN Multimedia

Davide Vitè

2006-01-01

CERN Technical Training 2006: Learning for the LHC! AXEL-2006 is a course series on particle accelerators, given at CERN within the framework of the 2006 Technical Training Programme. Known in the past as the PS Complex Operation Course (or the 'PS Shutdown Course'), the general accelerator physics module is organised since 2003 as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2006 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) during the week 6-10 February March 2006, and given in English...

Technical Training: AXEL-2005: Introduction to Particle Accelerators

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005: Learning for the LHC! AXEL-2005 is a course series on particle accelerators, given at CERN within the framework of the 2005 Technical Training Programme. Known in the past as the PS Complex Operation Course (or the 'PS Shutdown Course', now AB/OP), the general accelerator physics section is organised since 2003 as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2005 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) during the week 14-18 March 2005, given in Fr...

Technical training: AXEL-2009 - Introduction to Particle Accelerators

CERN Multimedia

HR Department

2008-01-01

CERN Technical Training 2009: Learning for the LHC! AXEL-2009 is a course series on particle accelerators, given at CERN within the framework of the 2009 Technical Training Program. Known in the past as the PS Complex Operation Course (or the ‘PS Shutdown Course’), the general accelerator physics module is organized since 2003 as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2009 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from the 19th – 23rd of January 2009, and given in English with...

Technical training: AXEL-2010 - Introduction to particle accelerators

CERN Multimedia

HR Department

2010-01-01

CERN Technical Training 2010: Learning for the LHC! AXEL-2010 is a course series on particle accelerators, given at CERN within the framework of the 2010 Technical Training Program. Known in the past as the PS Complex Operation Course (or the ‘PS Shutdown Course’), the general accelerator physics module is organized since 2003 as a joint venture between the BE department and Technical Training, and is open to a wider CERN community. The AXEL-2010 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from the 1st – 5th of February 201...

Proposal for outline of training and evaluation method for non-technical skills

International Nuclear Information System (INIS)

Nagasaka, Akihiko; Shibue, Hisao

2015-01-01

The purpose of this study is to systematize measures for improvement of emergency response capability focused on non-technical skills. As the results of investigation of some emergency training in nuclear power plant and referring to CRM training, following two issues were picked up. 1) Lack of practical training method for improvement of non-technical skills. 2) Lack of evaluation method of non-technical skills. Then, based on these 7 non-technical skills 'situational awareness' 'decision making' 'communication' 'teamworking' 'leadership' 'managing stress' 'coping with fatigue' are promotion factors to improve emergency response capability, we propose practical training method for each non-technical skill. Also we give example of behavioral markers as evaluation factor, and indicate approaches to introduce the evaluation method of non-technical skills. (author)

Non-technical skills training to enhance patient safety.

Science.gov (United States)

Gordon, Morris

2013-06-01

  Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations.   Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further.   A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention.   This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.

Design and Realization of Rotating Machinery Conditions Monitoring System Based on Labview

Science.gov (United States)

Fan, Qiyuan

Nonlinear dynamic analysis of rotating machinery system has always been the hot spot of the rotational dynamics research. This article sets up a rotating machinery condition monitoring system to realize the measurement of system dynamic characteristic parameters based on NI(National Instruments) virtual instruments technology. The measurement of vibration signal of rotating machinery system is achieved by using NI company general data acquisition module of NI company. Meanwhile, by analyzing and processing the acquired data using Labview 2012, the dynamic characteristics, such as .the speed of the rotating machinery system, the axis trajectory, spectrum parameters, are attained. The measurement results show that the rotating machinery condition monitoring system based on Labview is easy to operate, easy to realize the function extension and maintenance, and that it can be used in the industrial engineering projects with rotation characteristics. Labview as the development tools used by virtual instrument function, is very powerful data acquisition software products support is one of the features of it, so using Labview programming and data acquisition is simple and convenient [1].

Artificial intelligence programming with LabVIEW: genetic algorithms for instrumentation control and optimization.

Science.gov (United States)

Moore, J H

1995-06-01

A genetic algorithm for instrumentation control and optimization was developed using the LabVIEW graphical programming environment. The usefulness of this methodology for the optimization of a closed loop control instrument is demonstrated with minimal complexity and the programming is presented in detail to facilitate its adaptation to other LabVIEW applications. Closed loop control instruments have variety of applications in the biomedical sciences including the regulation of physiological processes such as blood pressure. The program presented here should provide a useful starting point for those wishing to incorporate genetic algorithm approaches to LabVIEW mediated optimization of closed loop control instruments.

INDOT Technical Training Plan : Appendix H

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix L

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix D

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix A

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix G

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix P

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix I

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix M

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix F

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix E

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix O

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix J

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix K

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix B

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix N

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix C

Science.gov (United States)

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

LabVIEW: a software system for data acquisition, data analysis, and instrument control.

Science.gov (United States)

Kalkman, C J

1995-01-01

Computer-based data acquisition systems play an important role in clinical monitoring and in the development of new monitoring tools. LabVIEW (National Instruments, Austin, TX) is a data acquisition and programming environment that allows flexible acquisition and processing of analog and digital data. The main feature that distinguishes LabVIEW from other data acquisition programs is its highly modular graphical programming language, "G," and a large library of mathematical and statistical functions. The advantage of graphical programming is that the code is flexible, reusable, and self-documenting. Subroutines can be saved in a library and reused without modification in other programs. This dramatically reduces development time and enables researchers to develop or modify their own programs. LabVIEW uses a large amount of processing power and computer memory, thus requiring a powerful computer. A large-screen monitor is desirable when developing larger applications. LabVIEW is excellently suited for testing new monitoring paradigms, analysis algorithms, or user interfaces. The typical LabVIEW user is the researcher who wants to develop a new monitoring technique, a set of new (derived) variables by integrating signals from several existing patient monitors, closed-loop control of a physiological variable, or a physiological simulator.

Type practical application in spectral analysis, combining Labview and open source software

Science.gov (United States)

Chioncel, C. P.; Anghel Drugarin, C. V.

2018-01-01

The paper presents the interconnection possibility of LabVIEW with his different opportunities and Scilab, one of the successful free MatLAB clones. The interconnection between those was made possible through the LabVIEW to Scilab gateway. This tool can be applied in virtual as well as in real laboratories, representing a true assistance for self-learning, too.

Development of software in LabVIEW for measurement of transport properties of high Tc superconductors

International Nuclear Information System (INIS)

Reilly, D.; Savvides, N.

1996-01-01

Full text: The gathering of data and their analysis are vital processes in experiments. We have used LabVIEW (National Instruments) to develop programs to measure transport properties of high - T c superconductors, eg. resistivity, ac susceptibility, I-V characteristics. Our systems make use of GPIB (IEEE - 488.2) programmable instruments and a personal computer. LabVIEW is a graphical programming system for instrument control and data acquisition, data analysis and presentation. A key feature of LabVIEW is the ability to graphically assemble software modules or virtual instruments (VIs) and 'wire' them together. In this paper we describe the development of several programs and will offer advice to colleagues wanting to explore LabVIEW

Data acquisition and real-time bolometer tomography using LabVIEW RT

International Nuclear Information System (INIS)

Giannone, L.; Eich, T.; Fuchs, J.C.; Ravindran, M.; Ruan, Q.; Wenzel, L.; Cerna, M.; Concezzi, S.

2011-01-01

The currently available multi-core PCI Express systems running LabVIEW RT (real-time), equipped with FPGA cards for data acquisition and real-time parallel signal processing, greatly shorten the design and implementation cycles of large-scale, real-time data acquisition and control systems. This paper details a data acquisition and real-time tomography system using LabVIEW RT for the bolometer diagnostic on the ASDEX Upgrade tokamak (Max Planck Institute for Plasma Physics, Garching, Germany). The transformation matrix for tomography is pre-computed based on the geometry of distributed radiation sources and sensors. A parallelized iterative algorithm is adapted to solve a constrained linear system for the reconstruction of the radiated power density. Real-time bolometer tomography is performed with LabVIEW RT. Using multi-core machines to execute the parallelized algorithm, a cycle time well below 1 ms is reached.

Pulsed power safety and technical training at Sandia National Laboratories

International Nuclear Information System (INIS)

Goldstein, S.A.; Zawadzkas, G.A.; Donovan, G.L.; Mikkelson, K.A.; Sharpe, A.W.; Johnston, R.R.

1987-01-01

The expansion of pulsed power applications research at Sandia National Labs requires increasing technician-level support from individuals trained in high voltage, short pulse technology. Large superpower generators need a broad-based training curriculum in all aspects of accelerator operation to satisfy recent Department of Energy (DOE) desires for formal certification of accelerator operators. This paper discusses the status of Sandia's safety and technical training program in pulsed power technology directed mainly towards high school graduate and technical school level students. Present safety training methodology requires that hazards for experimental facilities are identified first, a specific curriculum is then tailored to individuals' background experiences and hazards involved with their current assignments. In the technical training program, certification requirements are being established and a coursework program has been initiated in which subjects are organized into two sections. The first covers electrical principles and physical properties of pulsed power components. The second presents various support-type subsystems for accelerators

Full immersion simulation: validation of a distributed simulation environment for technical and non-technical skills training in Urology.

Science.gov (United States)

Brewin, James; Tang, Jessica; Dasgupta, Prokar; Khan, Muhammad S; Ahmed, Kamran; Bello, Fernando; Kneebone, Roger; Jaye, Peter

2015-07-01

To evaluate the face, content and construct validity of the distributed simulation (DS) environment for technical and non-technical skills training in endourology. To evaluate the educational impact of DS for urology training. DS offers a portable, low-cost simulated operating room environment that can be set up in any open space. A prospective mixed methods design using established validation methodology was conducted in this simulated environment with 10 experienced and 10 trainee urologists. All participants performed a simulated prostate resection in the DS environment. Outcome measures included surveys to evaluate the DS, as well as comparative analyses of experienced and trainee urologist's performance using real-time and 'blinded' video analysis and validated performance metrics. Non-parametric statistical methods were used to compare differences between groups. The DS environment demonstrated face, content and construct validity for both non-technical and technical skills. Kirkpatrick level 1 evidence for the educational impact of the DS environment was shown. Further studies are needed to evaluate the effect of simulated operating room training on real operating room performance. This study has shown the validity of the DS environment for non-technical, as well as technical skills training. DS-based simulation appears to be a valuable addition to traditional classroom-based simulation training. © 2014 The Authors BJU International © 2014 BJU International Published by John Wiley & Sons Ltd.

Remote monitoring of vacuum and valve status using LabVIEW

International Nuclear Information System (INIS)

Rozario, C.; Pal, S.; Nanal, V.; Pillay, R.G.

2015-01-01

For remote monitoring of vacuum status in LINAC and associated beam transport lines, a LabVIEW based interface through RS232 communication is developed. All vacuum stations in LINAC are equipped with Pfeiffer pressure measurement units, namely, TPQ 262 (for 2 no.s) and TPG256 (for 6 no.s). The communication to the unit is done via RS232 with the Serial Device Server. The electro-pneumatic gate valves separating beam line sections and cryostats are fitted with limit switches for indicating open/close status. A modular unit based on PIC 18F4520 microcontroller is developed to read the limit switch positions of up to 10 valves. Both the vacuum readout unit and the gate valve monitor unit act as a server to the client PC on the console. Each unit is assigned a unique IP address and connected to the TCP/IP Ethernet bus. The LabVIEW Virtual Instrument based TCP/IP is used for communication through the distributed LAN. It is possible to connect additional client PCs using the LabVIEW Remote Console features. During the accelerator operation the vacuum reading of the gauge and the status of valves can be monitored from the control room console. All the vacuum parameters like gauge value and status at different physical locations are scanned and logged approximately every second. The LabVIEW GUI has helped in making the system user friendly and can be expanded easily. (author)

The training system for technical personnel of producers

International Nuclear Information System (INIS)

Kleiner, E.

1980-01-01

The training system of BBC Mannheim for technical personnel is divided in different activities, according to the different target groups and tenors. Different departments take care of this activities, which supply one another. Problem, training activities and methods are described. (orig.) [de

CERN Technical Training - New courses available at CERN!

CERN Multimedia

HR Department

2010-01-01

1. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop Web 2.0 websites. Through a series of lectures and practical examples you will learn the power of the JavaScript XML Http request object and how it can be used to add advanced interactivity to your website. This course gives an overview of the main AJAX frameworks and Web 2.0 techniques. The course will take place, in English, from 28 to 30 June 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - “CAO = Allegro Design Entry HDL Front-to-Back Flow v16.3” is a 3 day course. In this course, you will learn how to create board-level schematic designs with Design Entry HDL. You will explore the integration between Design Entry HDL and other tools in the design flow, including the A...

Integrating Field Buses at the Application Level C Interface and LabView Integration

CERN Document Server

Charrue, P

1996-01-01

The controls group of the SPS and LEP accelerators at CERN, Geneva, uses many different fieldbuses into the controls infrastucture, such as 1553, BITBUS, GPIB, RS232, JBUS, etc. A software package (SL-EQUIP) has been developped to give end users a standardized application program interface (API) to access any equipment connected to any fieldbus. This interface has now been integrated to LabView. We can offer a powerful graphical package, running on HP-UX workstations which treats data from heterogeneous equipment using the great flexibility of LabView. This paper will present SL-EQUIP and LabView, and will then describe some applications using these tools.

Neutron flux density data acquisition system based on LabVIEW

International Nuclear Information System (INIS)

Zhao Yanhui; Zhao Xiuliang; Li Zonglun; Liang Fengyan; Liu Liyan

2011-01-01

In the LabVIEW software, combined with PCI-6251 data acquisition card, VI of neutron flux density data acquisition is realized by DAQmx data acquisition functions. VI is composed of front panel and block diagram. The data collected can be displayed in the forms of the data curve and the data control, and saved in the form of files. Test results show that the frequency of output signal in NI ELVIS can be accurately measured by the system, realizing neutron flux density data acquisition based on LabVIEW. (authors)

Surgical simulation: Current practices and future perspectives for technical skills training.

Science.gov (United States)

Bjerrum, Flemming; Thomsen, Ann Sofia Skou; Nayahangan, Leizl Joy; Konge, Lars

2018-06-17

Simulation-based training (SBT) has become a standard component of modern surgical education, yet successful implementation of evidence-based training programs remains challenging. In this narrative review, we use Kern's framework for curriculum development to describe where we are now and what lies ahead for SBT within surgery with a focus on technical skills in operative procedures. Despite principles for optimal SBT (proficiency-based, distributed, and deliberate practice) having been identified, massed training with fixed time intervals or a fixed number of repetitions is still being extensively used, and simulators are generally underutilized. SBT should be part of surgical training curricula, including theoretical, technical, and non-technical skills, and be based on relevant needs assessments. Furthermore, training should follow evidence-based theoretical principles for optimal training, and the effect of training needs to be evaluated using relevant outcomes. There is a larger, still unrealized potential of surgical SBT, which may be realized in the near future as simulator technologies evolve, more evidence-based training programs are implemented, and cost-effectiveness and impact on patient safety is clearly demonstrated.

42 CFR 493.1838 - Training and technical assistance for unsuccessful participation in proficiency testing.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Training and technical assistance for unsuccessful... REQUIREMENTS Enforcement Procedures § 493.1838 Training and technical assistance for unsuccessful participation... may require the laboratory to undertake training of its personnel, or to obtain necessary technical...

Journée LabVIEW au CERN

CERN Multimedia

HR Department

Le service de l’Enseignement technique a le plaisir de vous informer qu’une journée LabVIEW aura lieu au CERN le 19 novembre 2009. La conférence sera donnée à 70% en français et à 30% en italien; à l’issue de la première demi-journée une visite sera organisée au système de control des collimateurs du LHC. «Au cours des dernières années, les journées LabVIEW se sont imposées comme un événement à ne pas manquer, offrant aux utilisateurs mais aussi aux nouveaux venus dans le domaine, la possibilité d’approfondir leurs connaissances en programmation, d’apprendre à exploiter efficacement de nouvelles fonctions et de tout savoir sur la nouvelle version de l’outil de développement graphique.» Date: 19 novemb...

Relevance of Technical Training Institutions Taught Skills to Current ...

African Journals Online (AJOL)

Technical education in Kenya is a necessary condition that enables members of society to productively function in technologically rapidly changing society. Technical training institutions have the responsibility to develop skilled Artisans, Craftsmen and Technician for employment in business organizations and industries.

Lightweight UDP Pervasive Protocol in Smart Home Environment Based on Labview

Science.gov (United States)

Kurniawan, Wijaya; Hannats Hanafi Ichsan, Mochammad; Rizqika Akbar, Sabriansyah; Arwani, Issa

2017-04-01

TCP (Transmission Control Protocol) technology in a reliable environment was not a problem, but not in an environment where the entire Smart Home network connected locally. Currently employing pervasive protocols using TCP technology, when data transmission is sent, it would be slower because they have to perform handshaking process in advance and could not broadcast the data. On smart home environment, it does not need large size and complex data transmission between monitoring site and monitoring center required in Smart home strain monitoring system. UDP (User Datagram Protocol) technology is quick and simple on data transmission process. UDP can broadcast messages because the UDP did not require handshaking and with more efficient memory usage. LabVIEW is a programming language software for processing and visualization of data in the field of data acquisition. This paper proposes to examine Pervasive UDP protocol implementations in smart home environment based on LabVIEW. UDP coded in LabVIEW and experiments were performed on a PC and can work properly.

Scientific and technical training in the Soviet Union

Science.gov (United States)

Spearman, M. L.

1984-01-01

The Soviet Union recognizes that the foundation of their system depends upon complete dedication of the people to the state through thorough psychological training as well as through military training, and through specialized education in the broad fields of engineering, natural sciences, life sciences, social sciences, and education. An outline of the U.S.S.R. educational system indicates the extent of academic training, coupled with on-the-job and military training, that can produce a highly skilled, dedicated, and matured person. Observations on the coupling of political, economic, and psychological training along with the technical training are made, along with some mention of positive and negative aspects of the training.

Features of the technical training athletes with hearing impaired in various sports

Directory of Open Access Journals (Sweden)

Khurtyk D.V.

2012-09-01

Full Text Available It was analysed scientific-methodical and specialized literature on adaptive sports: table tennis, basketball, judo, skiing. It is conducted interviews with leading coaches working in the Deaflympic sport. Monitor the training process of elite athletes with hearing impairments, specializing in ski racing. Found that for technical training of athletes use the principle of learning the exercises and improvement from simple to complex with the rote. It was shown the necessity of attracting able-bodied athletes in the training process deflimpiytsev to optimize their technical training. The data obtained allow us to determine the direction of improving the technical skills of this category of athletes.

Revitalizing Technical and Vocational Education Training for ...

African Journals Online (AJOL)

Administrator

integrating technical and vocational education and training ... A cost sharing agreement was therefore signed in 2000, between. UNESCO and Nigeria Federal Ministry of .... done in the area of the target population, logistic and welfare.

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. *************************************** Software and System Technologies JAVA - Level 2 05-JUL-10 08-JUL-10 English 4 days JCOP - Finite State Machines in the JCOP Framework  22-JUN-10 24-JUN-10 English 3 days Le Langage C (ANSI et C99) 24-JUN-10 02-JUL-10 English 4 days Oracle - Programming with PL/SQL  28-JUN-10  30-JUN-10  English 3 days Project Development using Python 29-JUN-10 ...

Development of an Embedded Solar Tracking System with LabVIEW Motion Control

International Nuclear Information System (INIS)

Oh, Seung Jin; Hyun, Jun Ho; Oh, Won Jong; Kim, Yeong Min; Lee, Yoon Joon; Chun, Won Gee

2010-01-01

Motion control is a sub-field of automation, in which the position and/or velocity of machines are controlled using some type of device such as a hydraulic pump, linear actuator, or an electric motor. The motion control is widely used in the packaging, printing, textile, semiconductor production, and power plants. National Instruments LabVIEW is a graphical programming language that has its roots in automation control and data acquisition. Its graphical representation, similar to a process flow diagram, was created to provide an intuitive programming environment for scientist and engineers. Crystal River Nuclear Plant engineers developed automated testing system of nuclear plant control modules in an aging nuclear power plant using LabVIEW to improve performance and reliability and reduce cost. In this study, an embedded two-axis solar tracking system was developed using LabVIEW motion control module

Technical and Vocational Education and Training in Peace Education: Solomon Islands

Science.gov (United States)

Maebuta, Jack

2011-01-01

Technical and vocational education and training programs as a form of peace education are examined in this paper. It explores the notion of educating for a culture of peace through refocusing technical and vocational education and training programs on sustainable community development in the Solomon Islands. It further highlights the policy and…

77 FR 20369 - Applications for New Awards; Centers for Independent Living-Training and Technical Assistance

Science.gov (United States)

2012-04-04

... Education ACTION: Notice. Overview Information Centers for Independent Living--Training and Technical.... Funding Opportunity Description Purpose of Program The purpose of the Training and Technical Assistance grant under the Centers for Independent Living program is to provide training and technical assistance...

78 FR 25292 - Announcement of Funding Awards; Office of Native American Programs Training and Technical...

Science.gov (United States)

2013-04-30

... Awards; Office of Native American Programs Training and Technical Assistance; Fiscal Year 2012 AGENCY... (NOFA) for the Office of Native American Programs Training and Technical Assistance (ONAP T&TA). This... nonprofit organizations, as well as for-profit entities to provide Training & Technical Assistance to the...

Guide to good practices for the selection, training, and qualification of shift technical advisors

Energy Technology Data Exchange (ETDEWEB)

1993-02-01

The DOE Guide to Good Practices For The Selection, Training, and Qualification of Shift Technical Advisors can be used by any DOE nuclear facility that has implemented the shift technical advisor position. DOE Order 5480-20, ``Personnel Selection, Qualification, Training, and Staffing Requirements at DOE Reactor and Non-Reactor Nuclear Facilities,`` states that only Category A reactors must use shift technical advisor position. However, many DOE nuclear facilities have implemented the shift technical advisor position to provide independent on-shift technical advice and counsel to the shift operating personnel to help determine cause and mitigation of facility accidents. Those DOE nuclear facilities that have implemented or are going to implement the shift technical advisor position will find this guide useful. This guide addresses areas that may be covered by other training programs. In these cases, it is unnecessary (and undesirable) to duplicate these areas in the STA training program as long as the specific skills and knowledge essential for STAs are addressed. The guide is presented based on the premise that the trainee has not completed any facility-specific training other than general employee training.

Training and qualification program for nuclear criticality safety technical staff

International Nuclear Information System (INIS)

Taylor, R.G.; Worley, C.A.

1996-01-01

A training and qualification program for nuclear criticality safety technical staff personnel has been developed and implemented. The program is compliant with requirements and provides evidence that a systematic approach has been taken to indoctrinate new technical staff. Development involved task analysis to determine activities where training was necessary and the standard which must be attained to qualify. Structured mentoring is used where experienced personnel interact with candidates using checksheets to guide candidates through various steps and to provide evidence that steps have been accomplished. Credit can be taken for the previous experience of personnel by means of evaluation boards which can credit or modify checksheet steps. Considering just the wealth of business practice and site specific information a new person at a facility needs to assimilate, the program has been effective in indoctrinating new technical staff personnel and integrating them into a productive role. The program includes continuing training

CERN TECHNICAL TRAINING 2002: LEARNING FOR THE LHC!

CERN Multimedia

Davide Vitè

2002-01-01

- FEED-2002 - Analogue and Digital Techniques in Closed Loop Regulation Applications   FEED-2002 is a two-term course, given by CERN engineers in a new format within the framework of the Technical Training Programme. The course will review the techniques dealing with closed loop systems, focussing on time-invariant linear systems. FEED-2002 is composed of two terms, and of an open Introductory Lecture. Attendance to the Introductory Lecture is a prerequisite to the participation to both terms. All sessions will take place on Tuesdays afternoons in the Training Centre Auditorium, from 14h30 to 17h00. The course will be in English, with questions and answers also in French.   Introductory Lecture: AD/DA Conversion Techniques - An Overview Technical Training Seminar, 17 September 2002 (free attendance, no registration required) Lecturer: John Pett, SL-PO Programme: The modern Analogue to Digital (AD) and Digital to Analogue (DA) conversion methods. Digital representations of time-varyi...

CERN TECHNICAL TRAINING 2002: LEARNING FOR THE LHC !

CERN Multimedia

Davide Vitè

2002-01-01

- FEED-2002 - Analogue and Digital Techniques in Closed Loop Regulation Applications   FEED-2002 is a two-term course, given by CERN engineers in a new format within the framework of the Technical Training Programme. The course will review the techniques dealing with closed loop systems, focussing on time-invariant linear systems. FEED-2002 is composed of two terms, and of an open Introductory Lecture. Attendance to the Introductory Lecture is a prerequisite to the participation to both terms. All sessions will take place on Tuesdays afternoons in the Training Centre Auditorium, from 14h30 to 17h00. The course will be in English, with questions and answers also in French.   Introductory Lecture: AD/DA Conversion Techniques - An Overview Technical Training Seminar, 17 September 2002 (free attendance, no registration required) Lecturer: John Pett, SL-PO Programme: The modern Analogue to Digital (AD) and Digital to Analogue (DA) conversion methods. Digital representations of time-varying, rea...

CERN Technical Training: new courses on computer security

CERN Multimedia

HR Department

2009-01-01

Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Center. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour training aimed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions o...

Game-based dynamic simulations supporting technical education and training

Directory of Open Access Journals (Sweden)

Tore Bjølseth

2006-04-01

Full Text Available Educational games may improve learning by taking advantage of the new knowledge and skills of today’s students obtained from extensive use of interactive games. This paper describes how interactive dynamic simulators of advanced technical systems and phenomena can be shaped and adapted as games and competitions supporting technical education and training. Some selected examples at different educational levels are shown, from vocational training to university level courses. The potential benefit and perceived learning effect of this approach is also described and underpinned from comprehensive user feedback.

TECHNICAL TRAINING PROGRAMME

CERN Multimedia

Davide Vitè

2002-01-01

CLEAN-2002: Working in a Cleanroom A new, free of charge, half-day seminar is offered in the context of Technical Training for the LHC, for personnel working or managing activities in a cleanroom (for example physicists, engineers and technicians working at or visiting the laboratory). CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed, if possible. More information and registration is available HERE The next session, in English, will be on 24.4 (afternoon). Other sessions, in French and English, will be offered following demand. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

Fuzzy logic type 1 and type 2 based on LabVIEW FPGA

CERN Document Server

Ponce-Cruz, Pedro; MacCleery, Brian

2016-01-01

This book is a comprehensive introduction to LabVIEW FPGA™, a package allowing the programming of intelligent digital controllers in field programmable gate arrays (FPGAs) using graphical code. It shows how both potential difficulties with understanding and programming in VHDL and the consequent difficulty and slowness of implementation can be sidestepped. The text includes a clear theoretical explanation of fuzzy logic (type 1 and type 2) with case studies that implement the theory and systematically demonstrate the implementation process. It goes on to describe basic and advanced levels of programming LabVIEW FPGA and show how implementation of fuzzy-logic control in FPGAs improves system responses. A complete toolkit for implementing fuzzy controllers in LabVIEW FPGA has been developed with the book so that readers can generate new fuzzy controllers and deploy them immediately. Problems and their solutions allow readers to practice the techniques and to absorb the theoretical ideas as they arise. Fuzzy L...

A labview approach to instrumentation for the TFTR bumper limiter alignment project

International Nuclear Information System (INIS)

Skelly, G.N.; Owens, D.K.

1992-01-01

This paper reports on a project recently undertaken to measure the alignment of the TFTR bumper limiter in relation to the toroidal magnetic field axis. The process involved the measurement of the toroidal magnetic field, and the positions of the tiles that make up the bumper limiter. The basis for the instrument control and data acquisition system was National Instrument's LabVIEW 2. LabVIEW is a graphical programming system for developing scientific and engineering applications on a Macintosh. For this project, a Macintosh IIci controlled the IEEE-488 GPIB programmable instruments via an interface box connected to the SCSI port of the computer. With LabVIEW, users create graphical software modules called virtual instruments instead of writing conventional text-based code. To measure the magnetic field, the control system acquired data from two nuclear magnetic resonance magnetometers while the torroidal field coils were pulsed. To measure the position of the tiles on the limiter, an instrumented mechanical arm was used inside the vessel

Technical Training on High-Order Spectral Analysis and Thermal Anemometry Applications

Science.gov (United States)

Maslov, A. A.; Shiplyuk, A. N.; Sidirenko, A. A.; Bountin, D. A.

2003-01-01

The topics of thermal anemometry and high-order spectral analyses were the subject of the technical training. Specifically, the objective of the technical training was to study: (i) the recently introduced constant voltage anemometer (CVA) for high-speed boundary layer; and (ii) newly developed high-order spectral analysis techniques (HOSA). Both CVA and HOSA are relevant tools for studies of boundary layer transition and stability.

CERN Technical Training 2002: Learning for the LHC! Electromagnetic Compatibility (EMC): Introduction

CERN Multimedia

Davide Vitè

2002-01-01

A new session of the course Electromagnetic Compatibility (EMC): Introduction will be held on May 22 (am), in the framework of the CERN Technical Training Programme. This session, bilingual English-French, is free of charge, and will be given by F. Szoncso of TIS-GS division. The course is designed for physicists, engineers and technicians facing electromagnetic interference problems, and will describe the underlying phenomena and mechanisms of electromagnetic interference and their remedies. More information and online registration by EDH are available from the Technical Training "Electronics Design" pages, under the chapter "Miscellaneous". Please contact Technical.Training@cern.ch should you need any other information.

Development of LabVIEW Program for Lock-In Infrared Thermography

International Nuclear Information System (INIS)

Min, Tae Hoon; Na, Hyung Chul; Kim, Noh Yu

2011-01-01

A LabVIEW program has been developed together with simple infrared thermography(IRT) system to control the lock-in conditions of the system efficiently. The IR imaging software was designed to operate both of infrared camera and halogen lamp by synchronizing them with periodic sine signal based on thyristor(SCR) circuits. LabVIEW software was programmed to provide users with screen-menu functions by which it can change the period and energy of heat source, operate the camera to acquire image, and monitor the state of the system on the computer screen In experiment, lock-in IR image for a specimen with artificial hole defects was obtained by the developed IRT system and compared with optical image

76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

Science.gov (United States)

2011-04-04

... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...

COMPARISON OF PROPRIOCEPTIVE TRAINING OVER TECHNICAL TRAINING IN PREVENTION OF RECURRENT ANKLE SPRAIN AMONG PROFESSIONAL FOOTBALLERS

Directory of Open Access Journals (Sweden)

Jibi Paul

2015-04-01

Full Text Available Background: Ankle sprain is one of the major causes of disability in professional footballers. Objective of this study was to find out the effectiveness and to compare the effectiveness of the proprioceptive training and technical training immediately after the end of the treatment and after three months follow up in prevention of recurrent ankle sprain among professional footballers. Methods: 30 subjects with previous history of grade I or grade II ankle sprain, within one year were selected for the study. They were randomly divided into two groups equally treadmill 15 in each group A and group B. Group A and B received five minutes of warm-up by brisk walk on treadmill. Group A and B underwent 20 minutes of unilateral balance board training and unilateral vertical jump respectively. Results: Pre and post data were analyzed using Mann-Whitney test, Wilcoxon’s sign rank test, paired‘t’ test. Intra group analysis showed that both groups have shown significant improvement with P < 0.001, after the treatment. Inter group were analyzed the post scores of both groups and found no significant difference on proprioceptive training over technical training on recurrence of ankle sprain among professional footballers. Conclusion: The study concluded that proprioceptive and technical training are equally effective on prevention of recurrent ankle sprain among professional footballers with previous history of grade I or grade II ankle sprain.

Training of technical staff for nuclear power station operation

International Nuclear Information System (INIS)

Haire, T.P.; Myerscough, P.B.

1981-01-01

The statutory training requirements covering the technical staff in the CEGB (Central Electricity Generating Board) are discussed. Details of the training programmes emphasize the importance of the staff having a thorough understanding of the nuclear processes involved in the station operation and not relying solely upon a mechanistic approach to operating procedures. The impact of this philosophy on the design of training simulators is examined and a brief comparison is made with the training philosophies in other countries. (U.K.)

The Job Training and Job Satisfaction Survey Technical Manual

Science.gov (United States)

Schmidt, Steven W.

2004-01-01

Job training has become an important aspect of an employee's overall job experience. However, it is not often called out specifically on instruments measuring job satisfaction. This technical manual details the processes used in the development and validation of a survey instrument to measure job training satisfaction and overall job…

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

Science.gov (United States)

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

CERN Technical Training: Autumn 2007 Course Catalogue

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007. You may find the full updated Technical Training course programme in our web-catalogue. OFFICE SOFTWARE CERN EDMS MTF en pratique F 4.9 1/2 d WORD 2007 (Short Course III) - How to work with long documents E/F 14.9 1/2 d FrontPage 2003 - niveau 1 E/F 17-18.9 2 d WORD 2007 - Niveau1: ECDL F 20.-21-9 2 d ACCESS 2007 - Level 1: ECDL E 20-21.9 2 d EXCEL 2007 (Short Course I) - How to work with Formulae E/F 21.9 1/2 d CERN EDMS Introduction E 24.9 1 d Java 2 Enterprise Edition - Part 1: Web Applications E 24-25.9 2 d Outlook 2007 (Short Course II) - Calendar, Tasks and Notes E/F 28.9 1/2 d Outlook 2007 (Short Course III) - Meeting and Delegation ...

Design of Remote Power Plant Monitoring System Based on LabVIEW and VC++ Software

Directory of Open Access Journals (Sweden)

Dawei Tan

2013-05-01

Full Text Available This study designs a real-time remote monitoring system based on LabVIEW and Microsoft Visual C++ for Plant Units. The server written in LabVIEW uses for data acquisition and storage. The server adopts the TCP and DataSocket to communicate with the VC client. The remote VC client can accept real-time data and process data, enabling remote monitoring.

Computer simulation of thermal-hydraulics of MNSR fuel-channel assembly using LabView

International Nuclear Information System (INIS)

Gadri, L. A.

2013-07-01

A LabView simulator of thermal hydraulics has been developed to demonstrate the temperature profile of coolant flow in the reactor core during normal operation. The simulator could equally be used for any transient behaviour of the reactor. Heat generation, transfer and the associated temperature profile in the fuel-channel elements viz: the coolant, cladding and fuel were studied and the corresponding analytical temperature equations in the axial and radial directions for the coolant, outer surface of the cladding, fuel surface and fuel center were obtained for the simulation using LabView. Tables of values for the equations were constructed by MATLAB and excel software programs. Plots of the equations with LabView were verified and validated with the graphs drawn by the MATLAB. In this thesis, an analysis of the effects of the coolant inlet temperature of 24.5°C and exit temperature of 70.0° on the temperature distribution in fuel-channel elements of the reactor core of cylindrical geometry was carried out. Other parameters, including the total fuel channel power, mass flow rate and convective heat transfer coefficient were varied to study the effects on the temperature profile. The analytical temperature equations in the fuel channel elements of the reactor core were obtained. MATLAB and Excel software were used to construct data for the equations. The plots by MATLAB were used to benchmark the LabVIEW simulation. Excellent agreement was obtained between the MATLAB plots and the LabView simulation results with an error margin of 0.001. The analysis of the results by comparing gradients of inlet temperature, total reactor channel power and mass flow indicated that inlet temperature gradient is one of the key parameters in determining the temperature profile in the MNSR core. (au)

34 CFR 366.11 - What financial assistance does the Secretary provide for training and technical assistance?

Science.gov (United States)

2010-07-01

... for training and technical assistance? 366.11 Section 366.11 Education Regulations of the Offices of..., DEPARTMENT OF EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.11 What financial assistance does the Secretary provide for training and technical assistance? (a) From funds, if...

34 CFR 366.10 - What agencies are eligible for assistance to provide training and technical assistance?

Science.gov (United States)

2010-07-01

... training and technical assistance? 366.10 Section 366.10 Education Regulations of the Offices of the... EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.10 What agencies are eligible for assistance to provide training and technical assistance? Entities that have experience in the...

Application of LabVIEW in SSRF digital power supply development

International Nuclear Information System (INIS)

Tang Junlong; Chen Huanguang; Ke Xinhua; Chinese Academy of Science, Beijing; Xu Ruinian; Li Deming

2007-01-01

During development of the Shanghai Synchrotron Radiation Facility (SSRF) digital power supply, a digital pulse-width modulator (PWM) directly controls the power circuit insulated gate bipolar transistor (IGBT). A program in LabVIEW language has been developed to perform computer control and monitor for the digital PS via serial communication (RS232). The program provides a friendly user interface to the digital PS that makes it easy to observe its behavior and modify its parameters. Another program, also in LabVIEW language, has been developed to test long term stability of the digital power supply and store the experimental data via extremely precise Keithley instrument and computer. The experimental data are stored in an Excel file which can be processed and analyzed in the future. (authors)

The Relationship Between Technical And Nontechnical Skills Within A Simulation-Based Ureteroscopy Training Environment.

Science.gov (United States)

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; Khan, Shahid; McIlhenny, Craig; Brewin, James; Sahai, Arun; Bello, Fernando; Kneebone, Roger; Shamim Khan, Muhammad; Dasgupta, Prokar; Ahmed, Kamran

2015-01-01

Little integration of technical and nontechnical skills (e.g., situational awareness, communication, decision making, teamwork, and leadership) teaching exists within surgery. We therefore aimed to (1) evaluate the relationship between these 2 skill sets within a simulation-based environment and (2) assess if certain nontechnical skill components are of particular relevance to technical performance. A prospective analysis of data acquired from a comparative study of simulation vs nonsimulation training was conducted. Half of the participants underwent training of technical and nontechnical skills within ureteroscopy, with the remaining half undergoing no training. All were assessed within a full immersion environment against both technical (time to completion, Objective Structured Assessment of Technical Skills, and task-specific checklist scores) and nontechnical parameters (Nontechnical Skills for Surgeons [NOTSS] rating scale). The data of whole and individual cohorts were analyzed using Pearson correlation coefficient. The trial took place within the Simulation and Interactive Learning Centre at Guy's Hospital, London, UK. In total, 32 novice participants with no prior practical ureteroscopy experience were included within the data analysis. A correlation was found within all outcome measures analyzed. For the whole cohort, a strong negative correlation was found between time to completion and NOTSS scores (r = -0.75, p Technical Skills (r = 0.89, p technical skill parameters, regardless of training. A strong correlation between technical and nontechnical performance exists, which was demonstrated to be irrespective of training received. This may suggest an inherent link between skill sets. Furthermore, all nontechnical skill sets are important in technical performance. This supports the notion that both of these skills should be trained and assessed together within 1 curriculum. Copyright © 2015 Association of Program Directors in Surgery. Published by

Optics and optics-based technologies education with the benefit of LabVIEW

Science.gov (United States)

Wan, Yuhong; Man, Tianlong; Tao, Shiquan

2015-10-01

The details of design and implementation of incoherent digital holographic experiments based on LabVIEW are demonstrated in this work in order to offer a teaching modal by making full use of LabVIEW as an educational tool. Digital incoherent holography enables holograms to be recorded from incoherent light with just a digital camera and spatial light modulator and three-dimensional properties of the specimen are revealed after the hologram is reconstructed in the computer. The experiment of phase shifting incoherent digital holography is designed and implemented based on the principle of Fresnel incoherent correlation holography. An automatic control application is developed based on LabVIEW, which combines the functions of major experimental hardware control and digital reconstruction of the holograms. The basic functions of the system are completed and a user-friendly interface is provided for easy operation. The students are encouraged and stimulated to learn and practice the basic principle of incoherent digital holography and other related optics-based technologies during the programming of the application and implementation of the system.

Training and technical assistance to enhance capacity building between prevention research centers and their partners.

Science.gov (United States)

Spadaro, Antonia J; Grunbaum, Jo Anne; Dawkins, Nicola U; Wright, Demia S; Rubel, Stephanie K; Green, Diane C; Simoes, Eduardo J

2011-05-01

The Centers for Disease Control and Prevention has administered the Prevention Research Centers Program since 1986. We quantified the number and reach of training programs across all centers, determined whether the centers' outcomes varied by characteristics of the academic institution, and explored potential benefits of training and technical assistance for academic researchers and community partners. We characterized how these activities enhanced capacity building within Prevention Research Centers and the community. The program office collected quantitative information on training across all 33 centers via its Internet-based system from April through December 2007. Qualitative data were collected from April through May 2007. We selected 9 centers each for 2 separate, semistructured, telephone interviews, 1 on training and 1 on technical assistance. Across 24 centers, 4,777 people were trained in 99 training programs in fiscal year 2007 (October 1, 2006-September 30, 2007). Nearly 30% of people trained were community members or agency representatives. Training and technical assistance activities provided opportunities to enhance community partners' capacity in areas such as conducting needs assessments and writing grants and to improve the centers' capacity for cultural competency. Both qualitative and quantitative data demonstrated that training and technical assistance activities can foster capacity building and provide a reciprocal venue to support researchers' and the community's research interests. Future evaluation could assess community and public health partners' perception of centers' training programs and technical assistance.

76 FR 62455 - Announcement of Updated Funding Availability for H-1B Technical Skills Training Grants

Science.gov (United States)

2011-10-07

... 10-13] Announcement of Updated Funding Availability for H-1B Technical Skills Training Grants AGENCY... the availability of $240 million for the H-1B Technical Skills Training Grants to be awarded through a... additional applicants to apply for the H-1B Technical Skills Training Grants competition that will close on...

Development of a Computer-Assisted Instrumentation Curriculum for Physics Students: Using LabVIEW and Arduino Platform

Science.gov (United States)

Kuan, Wen-Hsuan; Tseng, Chi-Hung; Chen, Sufen; Wong, Ching-Chang

2016-01-01

We propose an integrated curriculum to establish essential abilities of computer programming for the freshmen of a physics department. The implementation of the graphical-based interfaces from Scratch to LabVIEW then to LabVIEW for Arduino in the curriculum "Computer-Assisted Instrumentation in the Design of Physics Laboratories" brings…

PLACES AVAILABLE

CERN Multimedia

Monique Duval

2002-01-01

Places are available in the following courses: Habilitation électrique : recyclage HT/BT : 11 - 15.3.2002  (2 * 2 heures) PVSS Basics :  8 - 12.4.02  (5 days) ELEC-2002 : Spring Term :  9, 11, 16, 18, 23, 25, 30.4.02 (7 * 2.5 hours) LabVIEW base 1 : 22 - 24.4.02 (3 jours) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) LabVIEW Basics 2 : 13 & 14.5.02 (2 days) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) Cours sur la migration AutoCAD :   AutoCAD : Mise à jour AutoCAD r-14 vers 2002 (2 jours) AutoCAD Mechanical PowerPack 6 basé sur AutoCAD 2002 (5 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applica...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Project Planning with MS-Project E 21 + 28/11 2 d Excel 2007 Level 2: ECDL E 26-27.11 2 d Introduction to Sharepoint E 23.11 1 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2 d Word 2007 - niveau 2 : ECDL F 13-14.12 2 d SOFTWARE AND SYSTEM TECHNOLOGIES JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans E 12-14.11 3 d Oracle - Develop Web-based Applications with PL/SQL E 15-16.11 2 d Oracle 10g Certif...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue. OFFICE SOFTWARE Project Planning with MS-Project E 21 + 28/11 2 d Excel 2007 Level 2: ECDL E 26-27.11 2 d Introduction to Sharepoint E 23.11 1 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2 d Word 2007 - niveau 2 : ECDL F 13-14.12 2 d SOFTWARE AND SYSTEM TECHNOLOGIES Oracle 10g Certified Professional E 19-23.11 5 d JAVA - Level 1 E 03-05.12 3 d XML - Introduction E 06-07.12 2 d ELECTRONIC DESIGN Advanced VHDL ...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming    25-MAY-10    28-MAY-10    English    3 days CERN openlab Multi-threading and Parallelism Workshop    04-MAY-10    05-MAY-10    English    2 days ITIL Foundations (version 3) EXAMINATION    29-APR-10    29-APR-10    English    1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans    21-JUN-10    23-JUN-10 &...

Technical Training: Places available

CERN Multimedia

Monique Duval

2004-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) The EDMS MTF in practice : 4.10.2004 (afternoon) The CERN EDMS for Engineers : 6.10.2004 (1 day) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Hands-On Object Oriented Design and Programming with C++ : 9 - 12.11.2004 (3 days) FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Outlook (Short Course III) : Meetings and Delegation : 9.11...

Endoscopic non-technical skills team training: the next step in quality assurance of endoscopy training.

Science.gov (United States)

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-12-14

To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day's training utilising real clinical examples. Pre and post-course evaluation comprised participants' patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams' knowledge and safety attitudes.

Endoscopic non-technical skills team training: The next step in quality assurance of endoscopy training

Science.gov (United States)

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-01-01

AIM: To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. METHODS: A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day’s training utilising real clinical examples. Pre and post-course evaluation comprised participants’ patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. RESULTS: Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. CONCLUSION: A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams’ knowledge and safety attitudes. PMID:25516665

Environmental Aspects of the Engineering Training at Technical University

Directory of Open Access Journals (Sweden)

V. V. Bushueva

2015-01-01

Full Text Available Problem relevance. The article gives a justification for a need to train professionally competent, ecologically oriented engineers capable to create new equipment taking into account the ecological characteristics. Such approach expresses a requirement coherence to develop technical systems and technologies taking into account, both technical reliability and human and environmental safety. Today, in conditions of modern industrial production it is an important point in engineer’s activity. So to train future engineers who meet these requirements new forms and methods are to be found.Objectives. To prove that involvement of creative student’s teams in training the future ecologically oriented engineers is of importance. The organisational structure and methods of activities along with the principles of revitalizing search for engineering ideas and solutions to develop environmentally safe technical systems and technologies allow us to solve more complicated problems. This is the important characteristic in activities of creative groups. The article considers a significance of the future engineer’s responsibility in terms of environment safety. It gives "Methodical advices to analyse the operational impacts of technical systems on the human and environment" to show that there is a need in development of reliable and environment-safe technical systems.Novelty of this work is a technique for the organization and forms of student creative team’s activities. It represents a revised and updated option of a technique of the creative teams working at the industrial enterprises in France. The revised technique takes into consideration both the specifics of student's audience at technical university and the environment-oriented tasks to be solved. Efficiency of search and solution of environment-oriented engineering tasks is enhanced owing to use of revitalizing methods for the creative team’s activities, which are widely used today in student

Product training for the technical expert the art of developing and delivering hands-on learning

CERN Document Server

Bixby, Daniel W

2018-01-01

I was pleased to review Dan's new book - pleased because he addresses an old topic in a new way. He is making no assumptions for trainers who are not fully experienced and seasoned. He takes them step-by-step through practical and realistic methods to set up training graduates to actually be on-the-job performers. Enjoy, learn and be inspired. Jim Kirkpatrick, PhD Senior Consultant, Kirkpatrick Partners, USA Daniel Bixby's approach to Product Training for technical experts is practical, relevant and exactly what anyone who is required to train others on technical content really needs. He writes with candor and with a sense of ease, making the reader feel as though he is right there with you helping to develop your training competency. A must read for anyone on your team required to provide technical training to others! Jennifer Alfaro Chief Human Resources Officer, USA An expert guide to developing and delivering technical product training programs While there are many books on talent developmen...

CERN Technical Training: available places in forthcoming courses

CERN Multimedia

HR Department

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Developing secure software    07-DEC-09    07-DEC-09    0.5 day    English Intermediate Linux System Administration    19-Nov-09    24-Nov-09    4 days    English JAVA - Level 2    16-Nov-09    19-Nov-09    4 days    English JCOP - Joint PVSS-JCOP Framework    23-Nov-09    27-Nov-09    4.5 days    English Oracle Database SQL Tun...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Travailler sur Windows Vista au CERN (free IT tutorial) F 30.10 1 h Introduction to Collaboration Workspaces using SharePoint (free IT tutorial) E 31.10 1h30 Lisez vos emails, et plus encore, avec Outlook 2007 (free IT tutorial) F 1.11 1h ACCESS 2007 - Level 2: ECDL E 1.-2.11 2 d Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Nouveauté office 2007 - Powerpoint 2007 E/F 16.11 1 d Excel 2007 (Short Course IV) - How to link cells, worksheets and workbooks ...

An Intelligent Lighting Control System (ILCS) using LabVIEW ...

African Journals Online (AJOL)

An Intelligent Lighting Control System (ILCS) was proposed and designed by considering ergonomic setting and energy efficiency. The integration of CompactRIO as a main hardware and National Instrument Laboratory Virtual Instrument Engineering Workbench (NI LabVIEW) 2012 as a platform to design an interactive ...

University-government relationships in the training of technical writers-editors

Science.gov (United States)

Stohrer, Freda F.; Pinelli, Thomas E.

1979-01-01

Traditional and nontraditional methods of training technical writers-editors are reviewed. Combining work experience with classroom instruction in the form of cooperative education provides a method of strengthening the Federal career service in professional occupations. The NASA Langley experience that successfully introduced students to the special demands of technical writing and editing is described.

Quiet eye training improves surgical knot tying more than traditional technical training: a randomized controlled study.

Science.gov (United States)

Causer, Joe; Harvey, Adrian; Snelgrove, Ryan; Arsenault, Gina; Vickers, Joan N

2014-08-01

We examined the effectiveness of technical training (TT) and quiet eye training (QE) on the performance of one-handed square knot tying in surgical residents. Twenty surgical residents were randomly assigned to the 2 groups and completed pretest, training, retention, and transfer tests. Participants wore a mobile eye tracker that simultaneously recorded their gaze and hand movements. Dependent variables were knot tying performance (%), QE duration (%), number of fixations, total movement time (s), and hand movement phase time (s). The QE training group had significantly higher performance scores, a longer QE duration, fewer fixations, faster total knot tying times, and faster movement phase times compared with the TT group. The QE group maintained performance in the transfer test, whereas the TT group significantly decreased performance from retention to transfer. QE training significantly improved learning, retention, and transfer of surgical knot tying compared with a traditional technical approach. Both performance effectiveness (performance outcome) and movement efficiency (hand movement times) were improved using QE modeling, instruction, and feedback. Copyright © 2014 Elsevier Inc. All rights reserved.

Technical Training: Make the most of Office, Sharepoint and Lync 2013

CERN Multimedia

2014-01-01

The IT Department, in cooperation with the Technical Training team, would like to invite you to IT Technical Training Tutorials 2014: Make the most of Office, Sharepoint and Lync 2013. In this lecture series, we will present: Microsoft Office 2013 Microsoft Lync 2013 (Including IP telephony) Microsoft SharePoint 2013 Sessions in French: 7 October, 9 a.m. - 12 p.m. Sessions in English: 13 October, 9 a.m. - 12 p.m. This training is free of charge, but please create your training request via EDH at: https://edh.cern.ch/Document/Personnel/TRN/new?course=146OEL01. Objectives of the training: General overview of the Microsoft Office 2013, Lync and Sharepoint 2013. Changes in comparison to the 2010 release of the software Discussion of new ways to communicate in the work environment, including audio calls, instant messaging, social newsfeeds and online editing of documents. The exact schedule for both series is available at: http://cern.ch/go/IT3T.

Implementation of Technical and Vocational Training Strategy in ...

African Journals Online (AJOL)

Ethiopia introduced a wide range of socioeconomic development strategies, programs and practices since 1991. One of these is Agricultural Technical and Vocational Education and Training (ATVET) strategy that aims at producing extension agents (usually referred to as development agents /DAs/) who are capable to ...

Data acquisition and control using National Instruments' ''LabVIEW'' software

International Nuclear Information System (INIS)

Kirkman, I.W.; Buksh, P.A.

1992-01-01

Using conventional programming techniques for the production of data acquisition and control software can be a time-consuming procedure, and the code subsequently produced can often be inflexible and rather difficult to modify in the light of changing experimental requirements. A new generation of commercial software products have recently appeared which it is claimed can significantly reduce development times and give rise to more flexible code and improved user interfaces. An example of such a product is National Instruments' ''LabVIEW,'' which presents a novel graphical approach based on Apple Macintosh computer platforms. Extensive use of LabVIEW has been made by the Soft X-ray Group at Daresbury Laboratory over the past two years, and its performance is reported on here. Several examples of experimental arrangements for which it has been used are described, and an evaluation of the product is made

Microcomputer Intelligence for Technical Training (MITT): The evolution of an intelligent tutoring system

Science.gov (United States)

Norton, Jeffrey E.; Wiederholt, Bradley J.; Johnson, William B.

1990-01-01

Microcomputer Intelligence for Technical Training (MITT) uses Intelligent Tutoring System (OTS) technology to deliver diagnostic training in a variety of complex technical domains. Over the past six years, MITT technology has been used to develop training systems for nuclear power plant diesel generator diagnosis, Space Shuttle fuel cell diagnosis, and message processing diagnosis for the Minuteman missile. Presented here is an overview of the MITT system, describing the evolution of the MITT software and the benefits of using the MITT system.

Year-end technical stop: train to work safely

CERN Multimedia

Rosaria Marraffino

2016-01-01

As mentioned in the previous issue of the Bulletin (see here), the accelerators are currently undergoing maintenance as part of the year-end technical stop (YETS). Hundreds of people are working simultaneously on different machines, and many of them need to be trained in order to work safely underground. From a Safety Training point of view, this has resulted in a significant increase in training requests, most of them at the last minute, which are now being handled – but not without difficulties.     In the LHC mock-up, a helium leak is simulated. In this stressful situation, the trainees learn how to put their mask on in less than 40 seconds.   "The most requested course is the Self-Rescue Mask classroom training,” explains Christoph Balle, Safety Training Section Leader. “In this course, people are trained to face the oxygen deficiency hazards that may occur in CERN's underground areas, learning...

TECHNICAL TRAINING: Programmation automate Schneider TSX Premium 2ème niveau - French version only

CERN Multimedia

2003-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training 2003: Learning for the LHC ! Annonce de nouvelle formation - cours avancé Dans le cadre du programme de l'Enseignement Technique 2003, et en collaboration avec le GUAPI (Groupe des Utilisateurs d'Automates Programmables Industriels du CERN), une nouvelle formation a été organisée afin de perfectionner les connaissances sur l'outil PL7 de programmation des Automates PREMIUM de Schneider. Ce nouveau cours (niveau 2) s'adresse aux person...

Remote intelligent nuclear facility monitoring in LabVIEW

International Nuclear Information System (INIS)

Kucewicz, J.C.; Argo, P.E.; Caffrey, M.; Loveland, R.C.; McNeil, P.J.

1996-01-01

A prototype system implemented in LabVIEW for the intelligent monitoring of the movement of radioactive' material within a nuclear facility is presented. The system collects and analyzes radiation sensor and video data to identify suspicious movement of material within the facility. The facility system also transmits wavelet- compressed data to a remote system for concurrent monitoring. 2 refs., 2 figs

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Access 2007 – Niveau 2: ECDL\t(Français)\t01-04.07\t4 ½ journées Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES Oracle 10g Certified Professional\t(English)\t30.06-04.07\t5 days Advanced Python-Hands-on\t(English)\t07-09.07\t3 days Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days MECHANICAL DESIGN ANSYS CFX\t(Français)\t28-31.07\t4 jours If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is alw...

Technical Education and Vocational Training in Developing Nations

Science.gov (United States)

Okolie, Ugochukwu Chinonso, Ed.

2017-01-01

Severe economic depression and the difficulty to acquire employment with adequate income have significant impact on a nation's social welfare. The need to provide ample educational opportunities is more imperative than ever, particularly in emerging economies. "Technical Education and Vocational Training in Developing Nations" is a…

Technical training: AXEL-2008 - Introduction to Particle Accelerators

CERN Multimedia

2008-01-01

CERN Technical Training 2008: Learning for the LHC! AXEL-2008 is a course series on particle accelerators, given at CERN within the framework of the AB Operation Group Shut-down Lectures. Since 2003, this course has been organized as a joint venture between the AB Department and Technical Training and is open to a wider CERN community. The AXEL-2008 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is also open to technicians, engineers and physicists interested in this field. The course does not require any prior knowledge of accelerators. However, some basic knowledge of trigonometry, matrices and differential equations and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from 29th January to 1st February 2008, and given in English with questions and answers als...

CERN Technical Training 2003: Learning for the LHC!

CERN Multimedia

2003-01-01

AXEL-2003 - Introduction to Particle Accelerators AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectures wil...

Technical training: AXEL-2008 - Introduction to Particle Accelerators

CERN Multimedia

2008-01-01

CERN Technical Training 2008: Learning for the LHC! AXEL-2008 is a course series on particle accelerators, given at CERN within the framework of the AB Operation Group Shut-down Lectures. Since 2003, this course is organized as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2008 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from the 29th of January to the 1st February 2008, and given in English with questions and answers also possible in French. The lecturer is Rende Steerenberg, engineer and sup...

CERN Technical Training 2003: Learning for the LHC!

CERN Multimedia

2003-01-01

AXEL-2003  -  Introduction to Particle Accelerators   AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectur...

CERN Technical Training: new courses on computer security

CERN Multimedia

HR Department

2009-01-01

Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Centre. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour course designed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions ...

CERN Technical Training: new courses on computer security

CERN Multimedia

HR Department

2009-01-01

Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Centre. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour course designed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions o...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Excel 2007 (Short Course IV) - How to link cells, worksheets and workbooks E/F 16.11 0.5 d Project Planning with MS-Project E 21/11 + 28/11 2 d Excel 2007 Level 2 : ECDL E 26-27.11 2 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2 d Word 2007 - niveau 2 : ECDL F 13-14.12 2 d SOFTWARE AND SYSTEM TECHNOLOGIES C++ for Particle Physicists E 05-09.11 3 d ...

CERN Technical Training: Places available for forthcoming courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE CERN EDMS Introduction E 24.9 1 d Outlook 2007 (Short Course II) - Calendar, Tasks and Notes E/F 28.9 0.5 d Outlook 2007 (Short Course III) - Meeting and Delegation E/F 28.9 0.5 d Excel 2007 Niveau 2 : ECDL F 11-12.10 2 d Excel 2007 (Short Course II) - How to format your worksheet for printing E/F 12.10 0.5 d Excel 2007 (Short Course I) - How to work with Formulae E/F 21.9 1/2 d Nouveauté Word 2007 E/F 22.10 1 d Nouveauté Excel 2007 E/F 23.10 1/2 d Excel 2007 Level 2 : ECDL F 25-26.10 2 d In...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE FrontPage 2003 - niveau 2 F 22-23.10 2 d Excel 2007 Level 2 : ECDL F 25-26.10 2 d Nouveauté Word 2007 E/F 29.10 1 d Nouveauté Excel 2007 E/F 30.10 0.5 d Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Nouveauté Powerpoint 2007 E/F 16.11 1 d Excel 2007 (Short Course IV) - How to link cells, worksheets and workbooks F/E 16.11 0.5 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Excel 2007 Niveau 2 : ECDL F 11-12.10 2 d Excel 2007 (Short Course II) - How to format your worksheet for printing E/F 12.10 0.5 d FrontPage 2003 - niveau 2 F 22-23.10 2 d Excel 2007 Level 2 : ECDL F 25-26.10 2 d Nouveauté Word 2007 E/F 29.10 1 d Nouveauté Excel 2007 E/F 30.10 0.5 d Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Nouveauté Powerpoint 2007 E/F 16.11 1 d Excel 2007 (Short Course IV) - How to link cells, work...

CERN Technical Training: Places available for forthcoming courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Outlook 2007 (Short Course II) - Calendar, Tasks and Notes E/F 28.9 0.5 d Outlook 2007 (Short Course III) - Meeting and Delegation E/F 28.9 0.5 d Excel 2007 Niveau 2 : ECDL F 11-12.10 2 d Excel 2007 (Short Course II) - How to format your worksheet for printing E/F 12.10 0.5 d Excel 2007 (Short Course I) - How to work with Formulae E/F 21.9 1/2 d Nouveauté Word 2007 E/F 22.10 1 d Nouveauté Excel 2007 E/F 23.10 1/2 d Excel 2007 Level 2 : ECDL F 25-26.10 2 d Introduction to Sharepoint E 29.10 1 d ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE FrontPage 2003 - niveau 2 F 22-23.10 2 d Excel 2007 Level 2: ECDL F 25-26.10 2 d Nouveauté Word 2007 E/F 29.10 1 d Nouveauté Excel 2007 E/F 30.10 0.5 d ACCESS 2007 - Level 2: ECDL E 1.-2.11 2 d Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Nouveauté Powerpoint 2007 E/F 16.11 1 d Excel 2007 (Short Course IV) - How to link cells, worksheets and workbooks F/E 16.11 0.5 d FrontPage 2003 - Level 1 E 29-30.11 2 d ...

Role-playing for more realistic technical skills training.

Science.gov (United States)

Nikendei, C; Zeuch, A; Dieckmann, P; Roth, C; Schäfer, S; Völkl, M; Schellberg, D; Herzog, W; Jünger, J

2005-03-01

Clinical skills are an important and necessary part of clinical competence. Simulation plays an important role in many fields of medical education. Although role-playing is common in communication training, there are no reports about the use of student role-plays in the training of technical clinical skills. This article describes an educational intervention with analysis of pre- and post-intervention self-selected student survey evaluations. After one term of skills training, a thorough evaluation showed that the skills-lab training did not seem very realistic nor was it very demanding for trainees. To create a more realistic training situation and to enhance students' involvement, case studies and role-plays with defined roles for students (i.e. intern, senior consultant) were introduced into half of the sessions. Results of the evaluation in the second term showed that sessions with role-playing were rated significantly higher than sessions without role-playing.

TECHNICAL TRAINING SEMINAR

CERN Multimedia

Davide Vitè

2002-01-01

Wednesday 6 March from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or contact the organiser.

TECHNICAL TRAINING SEMINAR

CERN Multimedia

Davide VITÈ

2002-01-01

Wednesday 6 March   from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or con...

Technical Training Seminar

CERN Multimedia

2003-01-01

Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsim ...

Technical Training Seminar

CERN Multimedia

2003-01-01

Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsi...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magn&...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

Places available as of 30.5.2006 (June-November course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue ACROBAT 7.0 : Utilisation de fichiers PDF 8 6.06.06 F Introduction à InDesign 16 7-8.06.06 F Python: Hands-on Introduction 24 7-9.06.06 E LabVIEW Base 2 16 22-23.06.06 F FileMaker - niveau 1 16 26-27.06.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-30.06.06 F Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E Introduction à Dreamweaver MX 16 ...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) AutoCAD - mise à jour d’AutoCAD 2002 à AutoCAD 2006 : 8.12.2005 (1 journée - pour les utilisateurs d’AutoCAD 2002) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) Finite State Machines in the JCOP Framework: 13 - 15.12.2005 (3 days) PCAD PCB - Introduction : 14 - 16.12.2005 (3 jours) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) AutoCAD 2006 - niveau 1 : 19, 20, 24 & 25.1.2006 (4 jours) LabVIEW Basics I:  23 - 25.1.2006...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Utilisation des fichiers PDF avec ACROBAT 6.0 : 1.3.2005 (1 journée) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 x 2.5-hour lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 x 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AXEL-2005; Introduction to Particle Accelerators : 14- 18.3.2005 (10 x 1 h lectures) ACCESS 2003 - Level 1: ECDL M5: 15 - 16.3.2005 (2 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermediate 1: 11 - 13.4.2005...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) Utilisation des fichiers PDF avec ACROBAT 6.0 : 1.3.2005 (1 journée) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 X 2.30-hours lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 X 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW intermediate 1: 11 - 13....

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 X 2.30-hours lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 X 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 20...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 x 2.5-hour lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 x 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) Oracle 9i: SQL: 14 -16.3.2005 (3 days) AXEL-2005; Introduction to Particle Accelerators : 14- 18.3.2005 (10 x 1 h lectures) ACCESS 2003 - Level 1: ECDL M5: 15 - 16.3.2005 (2 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) Oracle 9i: Programming with PL/SQL: 4 - 6.4.2005 (3 days) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermedia...

Technical Training: Places available

CERN Multimedia

DAvide Vitè

2006-01-01

Places available as of 25.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F EXCEL 2003 - niveau 1 : ECDL 16 30-31.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E WORD 2003 (Short Course III) - HowTo... Work with long documents 3 15.09.06 E/F EXCEL 2003 (Short Course I) - HowTo... Wor...

Technical Training: Places available

CERN Multimedia

Davide Vitè

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) LabVIEW Application Development (Intermediate 1): 5 - 7.12.2005 (3 d...

The Effects of Integrating On-Going Training for Technical Documentation Teams

Science.gov (United States)

Catanio, Joseph T.; Catanio, Teri L.

2010-01-01

The tools and techniques utilized in the technical communications profession are constantly improving and changing. Information Technology (IT) organizations devote the necessary resources to equip and train engineering, marketing, and sales teams, but often fail to do so for technical documentation teams. Many IT organizations tend to view…

[The research in a foot pressure measuring system based on LabVIEW].

Science.gov (United States)

Li, Wei; Qiu, Hong; Xu, Jiang; He, Jiping

2011-01-01

This paper presents a system of foot pressure measuring system based on LabVIEW. The designs of hardware and software system are figured out. LabVIEW is used to design the application interface for displaying plantar pressure. The system can realize the plantar pressure data acquisition, data storage, waveform display, and waveform playback. It was also shown that the testing results of the system were in line with the changing trend of normal gait, which conformed to human system engineering theory. It leads to the demonstration of system reliability. The system gives vivid and visual results, and provides a new method of how to measure foot-pressure and some references for the design of Insole System.

Labview Interface Concepts Used in NASA Scientific Investigations and Virtual Instruments

Science.gov (United States)

Roth, Don J.; Parker, Bradford H.; Rapchun, David A.; Jones, Hollis H.; Cao, Wei

2001-01-01

This article provides an overview of several software control applications developed for NASA using LabVIEW. The applications covered here include (1) an Ultrasonic Measurement System for nondestructive evaluation of advanced structural materials, an Xray Spectral Mapping System for characterizing the quality and uniformity of developing photon detector materials, (2) a Life Testing System for these same materials, (3) and the instrument panel for an aircraft mounted Cloud Absorption Radiometer that measures the light scattered by clouds in multiple spectral bands. Many of the software interface concepts employed are explained. Panel layout and block diagram (code) strategies for each application are described. In particular, some of the more unique features of the applications' interfaces and source code are highlighted. This article assumes that the reader has a beginner-to-intermediate understanding of LabVIEW methods.

Places available**

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) The JAVA Programming Language Level 2 : 11 to 13.1.2004 (3 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW Basics 1 : 22 - 24.3.20...

Metabolic Demand and Internal Training Load in Technical-Tactical Training Sessions of Professional Futsal Players.

Science.gov (United States)

Wilke, Carolina F; Ramos, Guilherme P; Pacheco, Diogo A S; Santos, Weslley H M; Diniz, Mateus S L; Gonçalves, Gabriela G P; Marins, João C B; Wanner, Samuel P; Silami-Garcia, Emerson

2016-08-01

Wilke, CF, Ramos, GP, Pacheco, DAS, Santos, WHM, Diniz, MSL, Gonçalves, GGP, Marins, JCB, Wanner, SP, and Silami-Garcia, E. Metabolic demand and internal training load in technical-tactical training sessions of professional futsal players. J Strength Cond Res 30(8): 2330-2340, 2016-The aim of the study was to characterize aspects of technical-tactical training sessions of a professional futsal team. We addressed 4 specific aims: characterize the metabolic demands and intensity of these training sessions, compare the training intensity among players of different positions, compare the intensity of different futsal-specific activities (4 × 4, 6 × 4, and match simulation), and investigate the association between an objective (training impulse; TRIMP) and a subjective method (session rating of perceived exertion; sRPE) of measuring a player's internal training load. Twelve top-level futsal players performed an incremental exercise to determine their maximal oxygen consumption, maximal heart rate (HRmax), ventilatory threshold (VT), and respiratory compensation point (RCP). Each player's HR and RPE were measured and used to calculate energy expenditure, TRIMP, and sRPE during 37 training sessions over 8 weeks. The average intensity was 74 ± 4% of HRmax, which corresponded to 9.3 kcal·min. The players trained at intensities above the RCP, between the RCP and VT and below the VT for 20 ± 8%, 28 ± 6%, and 51 ± 10% of the session duration, respectively. Wingers, defenders, and pivots exercised at a similar average intensity but with different intensity distributions. No difference in intensity was found between the 3 typical activities. A strong correlation between the average daily TRIMP and sRPE was observed; however, this relationship was significant for only 4 of 12 players, indicating that sRPE is a useful tool for monitoring training loads but that it should be interpreted for each player individually rather than collectively.

PLACES AVAILABLE

CERN Multimedia

Monique Duval

2002-01-01

Places are available in the following courses: LabView Hands-on (bilingue/bilingual - gratuit/free of charge) : 13.9.02 (a.m.) LabView DAQ Hands-on (bilingue/bilingual - gratuit/free of charge) : 13.9.02 (p.m.) AutoCAD 2002 - niveau 1 : 19, 20, 26, 27.9.02 (4 jours) LabView Base 1 : 23 - 25.9.02 (3 jours) LabView DAQ (E) : 26 - 27.9.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 30.9, 1, 2, 9, 10, 11.10.02 (6 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 10.10.02 (half-day, p.m.) AutoCAD 2002 - niveau 2 : 14 - 15.10.02 (2 jours) AutoCAD 2002 - Level 1 : 17, 18, 24, 25.10.02 (4 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Of...

CERN Technical Training 2006: ANSYS Course Sessions (August-September 2006)

CERN Multimedia

2006-01-01

The following ANSYS course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with CAD-FEM AG (CH): ANSYS Design Modeler (course in French): 29-30.8.2006 (2 days) ANSYS Workbench (course in French): 12-15.9.2006 (4 days, only 2 places available) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at under "Upcoming course sessions", with the detailed course programmes. The complete training offer of ANSYS courses at CERN can be found at the same website, under the Mechanical Design curriculum. CERN Technical Training courses are open only to the members of CERN personnel (staff members and fellows; associates, students, users, project associates; apprentices: employees of CERN contractors, with some restrictions). In particular, quoted prices and programmes refer specifically to the CERN ...

Enhancing Technical and Vocational Education and Training (TVET) in Nigeria for Sustainable Development: Competency-Based Training (CBT) Approach

Science.gov (United States)

Okoye, K. R. E.; Michael, Ofonmbuk Isaac

2015-01-01

This paper attempts to examine the concept of Competency-Based Training (CBT) as a veritable mode of delivery of Technical and Vocational Education and Training (TVET) and at the same time highlights some of the strengths and weaknesses of implementing competency-base training. The characteristics, principles and benefits of CBT were also x-rayed.…

New training reactor at Dresden Technical University

International Nuclear Information System (INIS)

Hansen, W.; Knorr, J.; Wolf, T.

2006-01-01

A total of 14 low-power (up to 10 W) training reactors have been operated at German universities, 9 of them officially classified as being operational in 2004, though for very different uses. This number is expected to drop sharply. The only comprehensive upgrading of a training reactor took place at Dresden Technical University: AKR-2, the most modern facility in Germany, started routine operation in April 2005, under a newly granted license pursuant to Sec. 7, Subsec. 1 of the German Atomic Energy Act, for training students in nuclear technology, for suitable research projects, and a a center of information about reactor technology and nuclear technology for the interested public. One special aspect of this refurbishment was the installation of digital safety I and C systems of the TELEPERM XS line, which are used also in other modern plants. This fact, plus the easy possibility to use the plant for many basic experiments in reactor physics and radiation protection, make the AKR-2 attractive also to other users (e.g. for training reactor personnel or other persons working in nuclear technology). (orig.)

Final priority. Rehabilitation Training: Job-Driven Vocational Rehabilitation Technical Assistance Center. Final priority.

Science.gov (United States)

2014-08-19

The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Rehabilitation Training program to establish a Job-Driven Vocational Rehabilitation Technical Assistance Center (JDVRTAC). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to focus on training in an area of national need. Specifically, this priority responds to the Presidential Memorandum to Federal agencies directing them to take action to address job-driven training for the Nation's workers. The JDVRTAC will provide technical assistance (TA) to State vocational rehabilitation (VR) agencies to help them develop for individuals with disabilities training and employment opportunities that meet the needs of today's employers.

AKR-1 nuclear training reactor of Dresden Technical University turns twenty-five

International Nuclear Information System (INIS)

Hansen, W.

2003-01-01

Twenty-five years ago, in the night of July 27 to 28, 1978, the AKR-1 nuclear training reactor of the Dresden Technical University went critical for the first time and was commissioned. On the occasion of this anniversary, a colloquy was arranged with representatives from science, politics and industry, at which the reactor's history, the excellent achievements in research and training with the reactor, and the status and perspectives of this research facility were described. The AKR-1 had been built within the framework of the Nuclear Development Program of the then German Democratic Republic (GDR). The Nuclear Power Scientific Division of the Dresden Technical University had been entrusted with the responsibility, among other things, to train university personnel for the GDR Nuclear Power Program. The review by an expert group in 1996 of this plant had resulted in a recommendation in favor of long-term plant operation. A nuclear licensing procedure to this effect was initiated, and the necessary technical backfitting measures were implemented. The AKR-1 plant now equally serves for the specialized training of students and for research. (orig.) [de

76 FR 35103 - Training and Qualification Requirements for Check Airmen and Flight Instructors; Technical Amendment

Science.gov (United States)

2011-06-16

... which initial and transition flight training must include an in-flight element. Technical Amendment This.... 28471; Amendment Nos. 121-355 and 135-125] RIN 2120-AF08 Training and Qualification Requirements for Check Airmen and Flight Instructors; Technical Amendment AGENCY: Federal Aviation Administration (FAA...

Design of digital trapezoidal shaping filter based on LabVIEW

International Nuclear Information System (INIS)

Liu Yujuan; Qin Guoxiu; Yang Zhihui; Zhang Xiaodong

2013-01-01

It describes the design of a digital trapezoidal shaping filter to nuclear signals based on LabVIEW. A method of optimizing the trapezoidal shaping filter's parameters was presented and tested, and the test results of the effect of shaping filter algorithm were studied. (authors)

Apprendre et maîtriser LabVIEW par ses applications

CERN Document Server

Martaj, Nadia

2014-01-01

Cet ouvrage traite de l'apprentissage du langage LabVIEW a travers ses applications dans des domaines industriels et academiques, qui permettront a l'ingenieur, technicien ou etudiant d'apprehender rapidement et efficacement ce langage. L'ouvrage commence, dans la partie I, par traiter les differents types de donnees du langage LabVIEW (tableaux, clusters, complexes, chaines de caracteres...), leur manipulation dans des structures d'execution (boucles While, For, la structure Condition, etc.), le langage textuel MathScript, des scripts Matlab, la boite de calcul utilisant la syntaxe du langage C ainsi que les nœuds de propriete qui permettent d'obtenir ou definir la propriete d''un VI. Cette etude est menee a travers des applications d'ingenierie.La partie II est consacree a l'etude de l'outil « Conception de controle et simulation » avec lequel nous pouvons simuler des systemes analogiques ou discrets.La partie III contient differentes applications qui traitent de nombreux themes comme la regulation (diff...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and System Technologies Business Objects Basic - 5-Nov-09 - 6-Nov-09 - 2 - French C++ Part 1 - Hands-On Introduction - 26-Oct-09 - 28-Oct-09 - 3 - English C++ Part 2: Object-Oriented and Generic Programming - 3-Nov-09 - 6-Nov-09 - 4 - English CERN openlab Multi-threading and Parallelism Workshop - 11-Nov-09 - 12-Nov-09 - 2 - English Developing secure software - 07-DEC-09 - 07-DEC-09 - 0.5 - English Emacs - way beyond Text Editing - 29-Oct-09 - 29-Oct-09 - 1 - English Intermediate Linux System Administration - 19-Nov-09 - 24-Nov-09 - 4 - English JAVA - Level 2 - 16-Nov-09 - 19-Nov-09 - 4 - English JAVA 2 Enterprise Edition - Part 1: Web Applications - 22-Oct-09 - 23-Oct-09 - 2 - English JCOP - Finite State Machines in the JCOP Framework - 10-No...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2012-01-01

The following course sessions are scheduled in the framework of the 2012 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Drupal in a Day 30/01/2012 30/01/2012 English Object-Oriented Analysis and Design using UML 07/02/2012 09/02/2012 English CERN openlab/Intel Computer Architecture and Performance Tuning Workshop 15/02/2012 16/02/2012 English Python - Hands-on Introduction 20/02/2012 23/02/2012 English ITIL Foundations (version 3) 22/02/2012 24/02/2012 English Drupal Site Building 05/03/2012 06/03/2012 English Joint PVSS-JCOP Framework 05/03/2012 09/03/2012 English Oracle Database SQL Tuning 07/03/2012 09/03/2012 English Oracle - SQL 12/03/2012 14/03/2012 English ITIL Foundations (version 3) EXAMINATION 19/03/2012 19/03/2012 English Object-oriented Design Patterns 19/03/2012 21/03/2012 English Python: Advanced Hands-On 26/03/2012 29/03/2012 English Ele...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 Novelties (English) – 03.03 - 1 day Sharepoint designer / Frontpage, Niveau 2 – (Français) - 06-07.03 - 2 jours CERN EDMS Introduction (Français) - 12.03 - 1 jour Sharepoint Collaboration Worskpace (Français) - 17-18.03 - 2 jours CERN EDMS for Engineers (English) - 20.03 - 1 day CERN EDMS for Local Administrators (English) - 27.03 - 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingue/Bilingual) - 31.03 – 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingue/Bilingual) - 31.03 – 0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingue/Bilingual) - 01.04 - 0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingue/Bilingual) - 01.04 -...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and System Technologies Business Objects Basic - 5-Nov-09 - 6-Nov-09 - French C++ Programming Part 1 - Hands-On Introduction - 26-Oct-09 - 28-Oct-09 - English CERN openlab Multi-threading and Parallelism Workshop - 11-Nov-09 - 12-Nov-09 - English CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09 - 7-Oct-09 - English Emacs - way beyond Text Editing\t29-Oct-09 - 29-Oct-09 - English Hands-On Object-Oriented and Generic Programming in C++ - 3-Nov-09 - 6-Nov-09 Intermediate Linux System Administration - 19-Nov-09 - 24-Nov-09 - English JAVA - Level 1\t12-Oct-09 - 14-Oct-09 - English JAVA - Level 2 - 16-Nov-09\t19-Nov-09 - English JAVA 2 Enterprise Edition - Part 1: Web Applications - 22-Oct-09 - 23-Oct-09 - English JCOP...

Simultaneous Estimation of Regression Functions for Marine Corps Technical Training Specialties.

Science.gov (United States)

Dunbar, Stephen B.; And Others

This paper considers the application of Bayesian techniques for simultaneous estimation to the specification of regression weights for selection tests used in various technical training courses in the Marine Corps. Results of a method for m-group regression developed by Molenaar and Lewis (1979) suggest that common weights for training courses…

Comunicación USB entre aplicaciones desarrolladas en LabVIEW y microcontroladores de Silicon Labs

Directory of Open Access Journals (Sweden)

Julio César Herrera Benítez

2013-06-01

Full Text Available El presente artículo trata sobre la utilización de LabVIEW para establecer comunicación USB con microcontroladores de la familia 8051 de Silicon Laboratories, utilizando un driver desarrollado por dicha compañía. En el documento se incluye una descripción de este driver, así como de las funciones principales que permiten el manejo del mismo, las cuales se encuentran en una biblioteca de enlace dinámico. El artículo contiene además una metodología básica para el uso de estas funciones y una explicación detallada a través de un ejemplo, donde se ilustra como cargar y configurar las mismas con el ambiente de desarrollo LabVIEW. Finalmente se muestran dos ejemplos de la utilización del driver a partir de una biblioteca de funciones USB creada en LabVIEW para la comunicación con un microcontrolador.

An intensive combined training program modulates physical, physiological, biomotoric, and technical parameters in women basketball players.

Science.gov (United States)

Kilinç, Fatih

2008-11-01

The purpose of this study was the investigation of the effects of an intensive combined training program based on the pretest scores of a university women's basketball team on their physical, physiological, biomotoric, and technical features. Twenty-four university volunteers were equally divided into two groups: an experiment group (intensive combined training group) and a control (technical training) group. The 10-week intensive combined training program was performed on the experiment group according to their pretest outcomes. Before and at the end of each period of training, which was scheduled four times a week, the physical, physiological, biomotoric, and technical performance of each subject were determined. With respect to the pre- and posttest measurements, the basketball group showed significant differences (p training program performed on university women basketball players had a significant effect on improving their physical, physiological, biomotoric, and technical features. It proved to be highly recommendable for female basketball players who are preparing for short-term tournaments; the basketball group in this study won a championship.

Energy resources technical training and development programs for American Indians

Energy Technology Data Exchange (ETDEWEB)

Cameron, R E; White, W S

1978-08-01

Because of the energy resources located on Native American owned lands, it is pertinent that the tribes on these reservations receive information, training, and technical assistance concerning energy and the environment and the decisions that must be made about energy-resource development. In the past, attempts to enlist Indians in technical-assistance programs met with little success because teaching methods seldom incorporated program planning by both tribal leaders and the technical training staff. Several technical-assistance programs given on reservations in the central and western parts of the country were conducted by Argonne National Lab.--programs that stressed practical, on-the-job experience through lecture, laboratory, and field studies. Each program was designed by ANL and tribal leaders to fit the needs and concerns of a particular tribe for its environment. The individual programs met with an impressive degree of success; they also prompted several Indians to pursue this type of education further at ANL and local Indian community colleges and to obtain funds for energy projects. Despite the positive feedback, several difficulties were encountered. Among them are the necessity to continually modify the programs to fit diverse tribal needs, to diminish politically motivated interference, and to increase portions of the funding to involve more Native Americans.

48 CFR 301.604 - Training and certification of Contracting Officers' Technical Representatives.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Training and certification of Contracting Officers' Technical Representatives. 301.604 Section 301.604 Federal Acquisition..., Contracting Authority, and Responsibilities 301.604 Training and certification of Contracting Officers...

The training and research reactor of the Zittau Technical College

International Nuclear Information System (INIS)

Ackermann, G.; Hampel, R.; Konschak, K.

1979-01-01

The light-water moderated training and research reactor of the Zittau Technical College, which has been put into operation 1 July 1979, is described. Having a power of 10 MW, it is provided for education of students and advanced training of nuclear power plant staff members. High inherent nuclear safety and economy of operation are achieved by appropriate design of the reactor core and the use of fresh fuel elements provided for the 10-MW research reactor at the Rossendorf Central Institute for Nucleear Research for one year on a loan basis. Further characteristics of the reactor are easy accessibility of the core interior for in-core studies, sufficient external experimental channels, and a control and protection system meeting the requirements of teaching operation. The installed technological and dosimetric devices not only ensure reliable operation of the reactor, but also extend the potentialities of experimental work and education that is reported in detail. The principles on which the training programs are based are explained in the light of some examples. The training reactor is assumed to serve for providing basic knowledge about processes in nuclear power stations with pressurized water reactors. Where the behaviour of a nuclear power station cannot sufficiently be demonstrated by the training reactor, a reasonable completion of practical training at special simulation models and experimental facilities of the Technical College and at the nuclear power plant simulator of the Rheinsberg nuclear power plant school has been conceived. (author)

Hardware and Software Integration in Project Development of Automated Controller System Using LABVIEW FPGA

International Nuclear Information System (INIS)

Mohd Khairulezwan Abd Manan; Mohd Sabri Minhat; Izhar Abu Hussin

2014-01-01

The Field-Programmable Gate Array (FPGA) is a semiconductor device that can be programmed after manufacturing. Instead of being restricted to any predetermined hardware function, an FPGA allows user to program product features and functions, adapt to new standards, and reconfigure hardware for specific applications even after the product has been installed in the field, hence the name field-programmable. This project developed a control system using LabVIEW FPGA. LabVIEW FPGA is easier where it is programmed by using drag and drop icon. Then it will be integrated with the hardware input and output. (author)

Development of emergency response training focusing on non-technical skills. (2) Extraction of non-technical skills

International Nuclear Information System (INIS)

Matsui, Yuko; Hikono, Masaru; Iwasaki, Mari; Morita, Mizuho

2017-01-01

This study aimed at characterizing a non-technical skill exercise for on-site managers in charge of initial response at an emergency response center by extracting and clarifying the behavior examples of non-technical skills shown in the exercise scenario. From video observations, the non-technical skill examples were identified from seven of the eight nontechnical skill categories which had been defined when the training program was developed. Especially, they included many skills of 'Communication', 'Situation Understanding' and 'Organizational management'. At the same time, the limitation when extracting the cases by observations was identified. The extracted non-technical skill cases are expected to be used for characterizing exercise scenarios, as well as provide knowledge to raise the awareness of exercise participants. (author)

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 - 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framew...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 â€" 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) OU...

Technical Training: Places available

CERN Multimedia

Monique Duval

2005-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW base 1 : 5 - 7.9.2005 (3 jours) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechniq...

Nuclear Criticality Safety Organization guidance for the development of continuing technical training. Revision 1

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in nuclear criticality safety at the Oak Ridge Y-12 Plant and throughout the DOE complex. Continuing technical training is training outside of the initial qualification program to address identified organization-wide needs. Typically, this training is used to improve organization performance in the conduct of business. This document provides guidelines for the development of the technical portions of the Continuing Training Program. It is not a step-by-step procedure, but a collection of considerations to be used during the development process

Integrating Space Flight Resource Management Skills into Technical Lessons for International Space Station Flight Controller Training

Science.gov (United States)

Baldwin, Evelyn

2008-01-01

The Johnson Space Center s (JSC) International Space Station (ISS) Space Flight Resource Management (SFRM) training program is designed to teach the team skills required to be an effective flight controller. It was adapted from the SFRM training given to Shuttle flight controllers to fit the needs of a "24 hours a day/365 days a year" flight controller. More recently, the length reduction of technical training flows for ISS flight controllers impacted the number of opportunities for fully integrated team scenario based training, where most SFRM training occurred. Thus, the ISS SFRM training program is evolving yet again, using a new approach of teaching and evaluating SFRM alongside of technical materials. Because there are very few models in other industries that have successfully tied team and technical skills together, challenges are arising. Despite this, the Mission Operations Directorate of NASA s JSC is committed to implementing this integrated training approach because of the anticipated benefits.

Technical Training: ELEC-2005: Electronics in High Energy Physics

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005: Learning for the LHC! ELEC-2005: Electronics in High Energy Physics - Spring Term ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the successful ELEC-2002 course series. This comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms: the Winter Term, Introduction to electronics in HEP, already took place; the next three Terms will run throughout the year: Spring Term: Integrated circuits and VLSI technology for physics (March, 6 lectures) - now open for registration Summer Term: System electronics for physics: Issues (May, 7 lectures) Autumn Term: Ele...

Using simulation to train orthopaedic trainees in non-technical skills: A pilot study.

Science.gov (United States)

Heaton, Samuel R; Little, Zoe; Akhtar, Kash; Ramachandran, Manoj; Lee, Joshua

2016-08-18

To enhance non-technical skills and to analyse participant's experience of a course tailored for orthopaedic surgeons. A Delphi technique was used to develop a course in human factors specific to orthopaedic residents. Twenty-six residents (six per course) participated in total with seven course facilitators all trained in Crisis Resource Management providing structured feedback. Six scenarios recreated challenging real-life situations using high-fidelity mannequins and simulated patients. Environments included a simulated operating suite, clinic room and ward setting. All were undertaken in a purpose built simulation suite utilising actors, mock operating rooms, mock clinical rooms and a high fidelity adult patient simulator organised through a simulation control room. Participants completed a 5-point Likert scale questionnaire (strongly disagree to strongly agree) before and after the course. This assessed their understanding of non-technical skills, scenario validity, relevance to orthopaedic training and predicted impact of the course on future practice. A course evaluation questionnaire was also completed to assess participants' feedback on the value and quality of the course itself. Twenty-six orthopaedic residents participated (24 male, 2 female; post-graduation 5-10 years), mean year of residency program 2.6 out of 6 years required in the United Kingdom. Pre-course questionnaires showed that while the majority of candidates recognised the importance of non-technical (NT) skills in orthopaedic training they demonstrated poor understanding of non-technical skills and their role. This improved significantly after the course (Likert score 3.0-4.2) and the perceived importance of these skills was reported as good or very good in 100%. The course was reported as enjoyable and provided an unthreatening learning environment with the candidates placing particular value on the learning opportunity provided by reflecting on their performance. All agreed that the

Development of sorting system control using LABVIEW

International Nuclear Information System (INIS)

Azraf Azman; Mohd Arif Hamzah; Noriah Mod Ali; John Konsoh; Mohd Idris Taib; Maslina Mohd Ibrahim; Nor Arymaswati Abdullah; Abu Bakar Mhd Ghazali

2005-01-01

The development of the Personnel Dosimeter Sorting System, proposed by the Secondary Standard Dosimetry Laboratory (SSDL) is to enhance the system or work flow in preparing the personnel dosimeter. The main objective of the system is to reduce stamping error, time and cost. The Personnel Dosimeter Sorting System is a semi-automatic system with an interfacing method using the Advantec 32 bit PCI interface card of 64 digital input and output. The system is integrated with the Labview version 7.1 programming language to control the sorting system and operation. (Author)

The Study on Virtual Medical Instrument based on LabVIEW.

Science.gov (United States)

Chengwei, Li; Limei, Zhang; Xiaoming, Hu

2005-01-01

With the increasing performance of computer, the virtual instrument technology has greatly advanced over the years, and then virtual medical instrument technology becomes available. This paper presents the virtual medical instrument, and then as an example, an application of a signal acquisition, processing and analysis system using LabVIEW is also given.

Technical Training: EMAG-2005 - Electromagnetic Design and Mathematical Optimization Methods in Magnet Technology

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005: Learning for the LHC! CERN Technical Training, in collaboration with the AT-MEL-EM section, is organising a new course series in the framework of the 2005 CERN Technical Training programme: EMAG-2005 - Electromagnetic Design and Mathematical Optimization Methods in Magnet Technology, composed of three-hour lectures in the morning and topical seminars in the afternoon. The EMAG-2005 course series will run at CERN from Monday April 4 until Thursday April 14 (no lectures on Friday 8). The course series, in English, will focus on the foundations of electromagnetism and the design of accelerator magnets, both normal conducting and superconducting, employing analytical and numerical field computations. Examples of the LHC magnet design using the CERN field computation program ROXIE will be presented. However, EMAG-2005 is not a ROXIE user course: it is rather a course for users or potential users of numerical field computation software, and for magnet designers. The course will be o...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/ where you can find the detailed course contents under the "Microsoft Office XP" catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participa...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the app...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the "Microsoft Office XP" catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the partici...

CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ap...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ...

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A 'blended learning' course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on November 9, morning. Course sessions are self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the appropriate WBT...

Development of emergency response training focusing on non-technical skills. (1) Development and Trial of 'TAIKAN Training'

International Nuclear Information System (INIS)

Hikono, Masaru; Matsui, Yuko; Kanayama, Masaki

2017-01-01

Since the Great East Japan Earthquake of 2011, there have been increasing calls for developing the leadership capabilities of managers who are in charge of command and control of the on-site emergency response center at nuclear power plants. Training programs to improve non-technical skills are being developed and introduced. The authors developed an active learning exercise 'TAIKAN Training' that can be repeatedly performed on-site, targeting on-site commander teams in charge of the initial response in an emergency situation. The exercise forms the core element of a non-technical skills training curriculum. This paper outlines the developed exercise, evaluates the stress on the participants caused by the exercise, and identifies any issues before actually introducing it to a site. (author)

CERN Technical Training: available places in forthcoming courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content (Bilingual)\t28.05\t3 hours Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t12.06\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workbook\t(Bilingual)\t12.06\t0.5 jour/day Word 2007 – Level 1: ECDL\t(Français)\t15-...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum 11-FEB-10 12-FEB-10 2 days English C++ Part 1 - Hands-On Introduction 17-Mar-10 19-Mar-10 3 days English CERN openlab/Intel Computer Architecture and Performance Tuning Workshop 09-FEB-10 10-FEB-10 2 days English Developing secure software 22-Mar-10 22-Mar-10 0,5 days English Emacs - way beyond Text Editing 26-Mar-10 26-Mar-10 1 day English Introduction to Databases and Database Design 11-Mar-10 12-Mar-10 2 days English JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans 22-Mar-10 24-Mar-10 3 days English JCOP - Finite State Machines in the JCOP Framework 9-Mar-10 11-Mar-10 3 days English JCOP - Joint PVSS-JCOP Framework 22-FEB-10 26-FEB-10 3 days English Object-Oriented Analysis and Design using UML 23-Mar-10 25...

CERN Technical training: available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 1 - Hands-On Introduction 17-Mar-10 19-Mar-10 2 days English Developing secure software 22-Mar-10 22-Mar-10 0.5 day English Emacs - way beyond Text Editing 26-Mar-10 26-Mar-10 2 days English Introduction to Databases and Database Design 11-Mar-10 12-Mar-10 2 days English ITIL Foundations (version 3) 8-Mar-10 10-Mar-10 3 days English ITIL Foundations (version 3) 12-APR-10 29-APR-10 3 days English ITIL Foundations (version 3) EXAMINATION 25-Mar-10 25-Mar-10 1 hour English JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans 22-Mar-10 24-Mar-10 3 days English JCOP - Finite State Machines in the JCOP Framework 9-Mar-10 11-Mar-10 3 days English JCOP - Finite State Machines in the JCOP Framework 27-APR-10 29-APR-10 3 days English JCOP - Joint PVS...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS Introduction (Français) 12.03 1 jour Sharepoint Collaboration Worskpace\t(Français) 17-18.03 2 jours CERN EDMS for Engineers (English) 20.03\t1 day CERN EDMS for Local Administrators (English) 27-28.03 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingual) 31.03 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingual)\t31.03\t0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t1 jour In Design: Introduction (Français)\t07-08.04\t2 jours Windows VISTA (Français)\t...

Automated tune measurements in the Advanced Light Source storage ring using a LabVIEW application

International Nuclear Information System (INIS)

Hinkson, J.A.; Chin, M.; Kim, C.H.; Nishimura, H.

1994-06-01

Horizontal and vertical betatron tunes and the synchrotron tune are measured frequently during storage ring commissioning. The measurements are tedious and subject to human errors. Automating this kind of repetitive measurement is underway using LabVIEW for Windows, a software application supplied by National Instruments Corporation, that provides acquisition, graphing, and analysis of data as well as instrument control through the General Purpose Interface Bus (GPIB). We have added LabVIEW access to the Advanced Light Source (ALS) data base and control system. LabVIEW is a fast and efficient tool for accelerator commissioning and beam physics studies. Hardware used to perform tune measurements include a tracking generator (or a white noise generator), strip line electrodes for external ''citation of the beam, button monitors, and a spectrum analyzer. All three tunes are displayed simultaneously on the spectrum analyzer. Our program automatically identifies three tunes by applying and analyzing small variations and reports the results. This routine can be encapsulated in other applications, for instance, in a chromaticity measurement and correction program

LabVIEW: what is it and why is it used?

CERN Multimedia

CERN. Geneva

2017-01-01

LabVIEW is a complicated acronym for Lab Virtual Instrument Engineering Workbench. Something catchy would have been better, because it is a programming language that lets you define your code graphically. From low level data acquisition to high level result presentation, you can perform everything with the same programming method and it makes programming fun.

Skills for Employment: Scaling Up Technical and Vocational Training

International Development Research Centre (IDRC) Digital Library (Canada)

Many young people have little or no skills. They are excluded from productive economic and social life. Those with an education often have skills that do not match current demand in the labour market, where educational and skill requirements are increasing. Technical and vocational training African countries have put their ...

MITT writer and MITT writer advanced development: Developing authoring and training systems for complex technical domains

Science.gov (United States)

Wiederholt, Bradley J.; Browning, Elica J.; Norton, Jeffrey E.; Johnson, William B.

1991-01-01

MITT Writer is a software system for developing computer based training for complex technical domains. A training system produced by MITT Writer allows a student to learn and practice troubleshooting and diagnostic skills. The MITT (Microcomputer Intelligence for Technical Training) architecture is a reasonable approach to simulation based diagnostic training. MITT delivers training on available computing equipment, delivers challenging training and simulation scenarios, and has economical development and maintenance costs. A 15 month effort was undertaken in which the MITT Writer system was developed. A workshop was also conducted to train instructors in how to use MITT Writer. Earlier versions were used to develop an Intelligent Tutoring System for troubleshooting the Minuteman Missile Message Processing System.

A New PC and LabVIEW Package Based System for Electrochemical Investigations.

Science.gov (United States)

Stević, Zoran; Andjelković, Zoran; Antić, Dejan

2008-03-15

The paper describes a new PC and LabVIEW software package based system forelectrochemical research. An overview of well known electrochemical methods, such aspotential measurements, galvanostatic and potentiostatic method, cyclic voltammetry andEIS is given. Electrochemical impedance spectroscopy has been adapted for systemscontaining large capacitances. For signal generation and recording of the response ofinvestigated electrochemical cell, a measurement and control system was developed, basedon a PC P4. The rest of the hardware consists of a commercially available AD-DA converterand an external interface for analog signal processing. The interface is a result of authorsown research. The software platform for desired measurement methods is LabVIEW 8.2package, which is regarded as a high standard in the area of modern virtual instruments. Thedeveloped system was adjusted, tested and compared with commercially available systemand ORCAD simulation.

Simulation-Based Laparoscopic Surgery Crisis Resource Management Training-Predicting Technical and Nontechnical Skills.

Science.gov (United States)

Goldenberg, Mitchell G; Fok, Kai H; Ordon, Michael; Pace, Kenneth T; Lee, Jason Y

2017-12-19

To develop a unique simulation-based assessment using a laparoscopic inferior vena cava (IVC) injury scenario that allows for the safe assessment of urology resident's technical and nontechnical skills, and investigate the effect of personality traits performance in a surgical crisis. Urology residents from our institution were recruited to participate in a simulation-based training laparoscopic nephrectomy exercise. Residents completed demographic and multidimensional personality questionnaires and were instructed to play the role of staff urologist. A vasovagal response to pneumoperitoneum and an IVC injury event were scripted into the scenario. Technical and nontechnical skills were assessed by expert laparoscopic surgeons using validated tools (task checklist, GOALS, and NOTSS). Ten junior and five senior urology residents participated. Five residents were unable to complete the exercise safely. Senior residents outperformed juniors on technical (checklist score 15.1 vs 9.9, p Technical performance scores correlated with NOTSS scores (p technical performance (p technical score (p = 0.03) and pass/fail rating (p = 0.04). Resident level of training and laparoscopic experience correlated with technical performance during a simulation-based laparoscopic IVC injury crisis management scenario, as well as multiple domains of nontechnical performance. Personality traits of our surgical residents are similar and did not predict technical skill. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Repositioning Technical and Vocational Education and Training (TVET) for Youths Employment and National Security in Nigeria

Science.gov (United States)

Ogbunaya, T. C.; Udoudo, Ekereobong S.

2015-01-01

The paper focused on repositioning Technical and Vocational Education and Training (TVET) for youth's employment and national security in Nigeria. It examined briefly the concepts of technical vocational education and training (TVET), youths, unemployment and national security as well as the effects of unemployment on national security in Nigeria.…

45 CFR 2524.10 - For what purposes will technical assistance and training funds be made available?

Science.gov (United States)

2010-10-01

... OTHER SPECIAL GRANTS § 2524.10 For what purposes will technical assistance and training funds be made... 45 Public Welfare 4 2010-10-01 2010-10-01 false For what purposes will technical assistance and training funds be made available? 2524.10 Section 2524.10 Public Welfare Regulations Relating to Public...

Online MOS Capacitor Characterization in LabVIEW Environment

Directory of Open Access Journals (Sweden)

Chinmay K Maiti

2009-08-01

Full Text Available We present an automated evaluation procedure to characterize MOS capacitors involving high-k gate dielectrics. Suitability of LabVIEW environment for online web-based semiconductor device characterization is demonstrated. Developed algorithms have been successfully applied to automate the MOS capacitor measurements for Capacitance-Voltage, Conductance-Voltage and Current-Voltage characteristics. Implementation of the algorithm for use as a remote internet-based characterization tool where the client and server communicate with each other via web services is also shown.

Technical Training: Places available

CERN Multimedia

Davide Vitè

2006-01-01

The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACCESS 2003 - Level 2: ECDL AM5 16 19 to 20-01-06 E-F AutoCAD 2006 - niveau 1 32 19 to 25-01-06 F C++ Programming Advanced - Traps and Pitfalls 32 24 to 27-01-06 E STEP7 : Level 1 32 24 to 27-01-06 E LabVIEW Basics 2 16 26 to 27-01-06 E AutoCAD Mechanical 2006 16 30 to 31-01-06 F DIAdem : base 24 01 to 03-02-06 F FrontPage 2003 - niveau 1 16 02 to 03-02-06 F ACROBAT 7.0 : Utilisation de fichiers PDF 8 06-02-06 F Manipulation des images 4 08-02-06 F OUTLOOK 2003 (Short Course I) - E-mail 3 09-02-06 E-F WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F JCOP: Control System Integration using JCOP Tools 24 14 to 16-02-06 E OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Note...

Technical Training: ELEC-2005

CERN Multimedia

Davide Vitè

2005-01-01

ELEC-2005 - Electronics in High Energy Physics: Autumn Term (November-December 2005) ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the ELEC-2002 course series. This new, comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms. The Winter (Introduction to electronics in HEP), Spring (Integrated circuits and VLSI technology for physics), and Summer (System electronics for physics: Issues) Terms already took place. The Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) is now open for online registration, and will start on November 8th with the...

Experience from the development of Point Lepreau's training program for technical support staff

International Nuclear Information System (INIS)

Turner, S.; Scott, K.

2007-01-01

The Training Department at the Point Lepreau GS has been developing and improving its training for technical support staff. A generic set of objectives are being used as the basis for a systematic approach to training. The program covers general and job specific knowledge and skills using a mix of classroom instruction, mentoring and continuing training seminars. This paper describes experience, success and the challenges in the development, delivery and evaluation of the training program. (author)

Towards competence-based technical-vocational education and training in Ethiopia

NARCIS (Netherlands)

Solomon, Getachew Habtamu

2016-01-01

In the human development effort, different countries are underscoring the role of technical-vocational education and training (TVET) in providing relevant knowledge and skills to improve productivity, increase access to employment opportunities and raise the standard of living. It is in

Presentation of the G-24 technical working group on training

International Nuclear Information System (INIS)

Haber, S.

1993-01-01

The Technical Working Group on Training (TWG-T) was created during the Plenary Session of September 1992 in order to inform the Members on ongoing activities in the Nuclear Training field, define redundancies and gaps of the ''Assistance Programs'', and propose efficient ways to progress. Training was recognized as one major activity through which operational safety can be very effectively and quite quickly improved and therefore the Plenary Session unanimously decided to launch a TWG on the subject. The present report is issued one year after the creation of the TWG. It summarizes the major steps of the activities and presents the relevant results. It also contains copies of documents on training infrastructures and requirements, provided by the recipient countries during the course of the work

A LabVIEW Platform for Preclinical Imaging Using Digital Subtraction Angiography and Micro-CT.

Science.gov (United States)

Badea, Cristian T; Hedlund, Laurence W; Johnson, G Allan

2013-01-01

CT and digital subtraction angiography (DSA) are ubiquitous in the clinic. Their preclinical equivalents are valuable imaging methods for studying disease models and treatment. We have developed a dual source/detector X-ray imaging system that we have used for both micro-CT and DSA studies in rodents. The control of such a complex imaging system requires substantial software development for which we use the graphical language LabVIEW (National Instruments, Austin, TX, USA). This paper focuses on a LabVIEW platform that we have developed to enable anatomical and functional imaging with micro-CT and DSA. Our LabVIEW applications integrate and control all the elements of our system including a dual source/detector X-ray system, a mechanical ventilator, a physiological monitor, and a power microinjector for the vascular delivery of X-ray contrast agents. Various applications allow cardiac- and respiratory-gated acquisitions for both DSA and micro-CT studies. Our results illustrate the application of DSA for cardiopulmonary studies and vascular imaging of the liver and coronary arteries. We also show how DSA can be used for functional imaging of the kidney. Finally, the power of 4D micro-CT imaging using both prospective and retrospective gating is shown for cardiac imaging.

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007 : Word 2007\t(Français)\t11.05\t1 jour Secure e-mail and Web browsing\t(Français)\t19.05\t1.5 heure Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course III) – Meetings and Delegation (Bilingual)\t26.05\t3 hours Word 2007 (Short Course II) – HowTo…Mail merge (with Outlook)\t(Bilingual)\t26.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content\t(Bilingual)\t28.05\t3 hours Indico – Meeting Organization\t(English)\t05.06\t2 hours Indico – Conference Organization\t(Français)\t05.06\t3 hours Excel 2007 (Short Course I) –HowTo…Work with formulae (...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007 : Word 2007\t(Français)\t11.05\t1 jour Secure e-mail and Web browsing\t(Français)\t19.05\t1.5 heure Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course III) – Meetings and Delegation (Bilingual)\t26.05\t3 hours Word 2007 (Short Course II) – HowTo…Mail merge (with Outlook)\t(Bilingual)\t26.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content\t(Bilingual)\t28.05\t3 hours Indico – Meeting Organization\t(English)\t05.06\t2 hours Indico – Conference Organization\t(Français)\t05.06\t3 hours Excel 2007 (Short Course I) –HowTo…Work with formulae\t(...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 2 : ECDL\t(English)\t04-05.05\t2 days Excel 2007 – Level 2 : ECDL\t(English)\t07-08.05\t2 days Novelties Office 2007 : Word 2007\t(Français)\t11.05\t1 jour Secure e-mail and Web browsing\t(Français)\t19.05\t1.5 heure Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course III) – Meetings and Delegation (Bilingual)\t26.05\t3 hours Outlook 2007 (Short Course II) – HowTo…Mail merge (with Outlook)\t(Bilingual)\t26.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content\t(Bilingual)\t28.05\t3 hours Indico – Meeting Organization\t(English)\t05.06\t2 hours Indico ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content\t(Bilingual)\t28.05\t3 hours Indico – Meeting Organization\t(English)\t05.06\t2 hours Indico – Conference Organization\t(Français)\t05.06\t3 hours Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t12.06\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workb...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Collaboration Workspace\t(Français)\t06-07.11\t1 ½ jour Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Word 2007 (Short course III) – HowTo…Work with long documents: styles and tables of contents\t(Bilingual)\t13.11\t3 hours Excel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Word 2007 – Level 1: ECDL\t(English)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Cale...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007 : PowerPoint 2007 (English)\t27.10\t1 day Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Word 2007 (Short course III) – HowTo…Work with long documents: styles and tables of contents\t(Bilingual)\t13.11\t3 hour Excel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Sharepoint Designer (Frontpage) – Niveau 2\t(Français)\t17-18.11\t2 jours Word 2007 – Level 1: ECDL\t(English)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilin...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Word 2007 (Short course III) – HowTo…Work with long documents: styles and tables of contents\t(Bilingual)\t13.11\t3 hours\tExcel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Word 2007 – Level 1: ECDL\t(English)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual) 05.12\t3 hours Powerpoint 2007 ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 – Niveau 1 : ECDL\t(Français)\t27-28.05\t2 jours Sharepoint Designer (Frontpage) – Level 1\t(English)\t29-30.05\t2 days Sharepoint Collaborative Services\t(Francais)\t02-03.06\t2 days Indico – Meting Organization\t(Français)\t03.06\t2 heures Indico – Conference Organization\t(Français)\t03.06\t3 heures Introduction to Dreamweaver MX\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course II) – Calendar, Tasks and Notes\t(Bilingue)\t09.06\t½ day/jour Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Niveau 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(English)\t12-13.06\t2 days PowerPoint 2007 – Niveau 1: ECDL...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Secure e-mail and Web browsing\t(English)\t22.04\t1.5 hour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and work...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the 2007 CERN Technical Training Programme and still have places available. You may find the full, updated Technical Training course programme on our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE PowerPoint 2007 – Level/Niveau 1: ECDL\t(E/F)\t14-15.01\t(2 d) Windows XP\tF\t18.01 0.5 d Word - Niveau 1\t(F)\t21-22.01\t(2 d) Excel - Niveau 1\t(F)\t24-25.01\t(2 d) DreamWeaver\t(F)\t28-29.01\t(2 d) Sharepoint Designer (Frontpage) Niveau 1\t(F)\t31.01-01-02\t(2 d) SOFTWARE AND SYSTEM TECHNOLOGIES JCOP - Joint PVSS-JCOP Framework\t(E)\t28.01-01.02\t(4.5 d) ELECTRONIC DESIGN Introduction - Electromagnetic Compatibility (EMC) / Compatibilité électromagnetique (CEM)\t(E/F)\t16.01\t(0.5 d) S7 Distributed Safety Systems (E)\t23-25.01\t(3 d) Applications - Electromagnetic Compatibility (EMC) / Compatibilité électromagnetique (CEM)\t(E/F)\t30.01\t(0.5 d) SPECIAL COURSE AXEL: Introduction to Particle Accelerators\t(E)\t29...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduction (Français)\t13-14.05\t2 jours Sharepoint Collaboration Worskpace\t(English)\t19-20.05\t2 days Sharepoint Designer (Frontpage) – Level 1 ECDL\t(English)\t29-30.05\t2 days SOFTWARE AND SYSTEM TECHNOLOGIES C++ Programming Part 1 – Java 2 Enterprise Edition: Part 2 Enterprise JavaBeans (English)\t14-16.04 3 days Oracle SQL (En...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 Novelties\t(English)\t03.03\t1 day Sharepoint designer / Frontpage, Niveau 2\t(Français) 06-07.03 2 jours CERN EDMS Introduction (Français) 12.03 1 jour Sharepoint Collaboration Worskpace\t(Français) 17-18.03 2 jours CERN EDMS for Engineers (English) 20.03\t1 day CERN EDMS for Local Administrators (English) 27-28.03 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingual) 31.03 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingual)\t31.03\t0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t1 jour...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007 : PowerPoint 2007 (English)\t27.10\t1 day Sharepoint Collaboration Workspace\t(Français)\t06-07.11\t1 ½ day Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Word 2007 (Short course III) – HowTo…Work with long documents\t(Bilingual)\t13.11\t½ jour Excel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Word 2007 (Short course II) – HowTo…Mail merge (Bilingual)\t14.11\t½ day Sharepoint Designer (Frontpage) – Niveau 2\t(Français)\t17-18.11\t2 jours Word 2007 – Level 1: ECDL\t(English)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Sharepoint Designer (Frontpa...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS for Engineers (English) 20.03\t1 day CERN EDMS for Local Administrators (English) 27-28.03 2 days Word 2007: Short course I: HowTo. work with AutoTasks (Bilingual) 31.03 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingual)\t31.03\t0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t0.5 jour Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours Windows VISTA (Français)\t04.04\t1 jour CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007: Word 2007\tFrançais)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Hands-On Object-Oriented and Generic Programming in C++\t3-Nov-09\t6-Nov-09 Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the JCOP Framework\t10-...

Array data extractor (ADE): a LabVIEW program to extract and merge gene array data.

Science.gov (United States)

Kurtenbach, Stefan; Kurtenbach, Sarah; Zoidl, Georg

2013-12-01

Large data sets from gene expression array studies are publicly available offering information highly valuable for research across many disciplines ranging from fundamental to clinical research. Highly advanced bioinformatics tools have been made available to researchers, but a demand for user-friendly software allowing researchers to quickly extract expression information for multiple genes from multiple studies persists. Here, we present a user-friendly LabVIEW program to automatically extract gene expression data for a list of genes from multiple normalized microarray datasets. Functionality was tested for 288 class A G protein-coupled receptors (GPCRs) and expression data from 12 studies comparing normal and diseased human hearts. Results confirmed known regulation of a beta 1 adrenergic receptor and further indicate novel research targets. Although existing software allows for complex data analyses, the LabVIEW based program presented here, "Array Data Extractor (ADE)", provides users with a tool to retrieve meaningful information from multiple normalized gene expression datasets in a fast and easy way. Further, the graphical programming language used in LabVIEW allows applying changes to the program without the need of advanced programming knowledge.

3D Reconstruction of NMR Images by LabVIEW

Directory of Open Access Journals (Sweden)

Peter IZAK

2007-01-01

Full Text Available This paper introduces the experiment of 3D reconstruction NMR images via virtual instrumentation - LabVIEW. The main idea is based on marching cubes algorithm and image processing implemented by module of Vision assistant. The two dimensional images shot by the magnetic resonance device provide information about the surface properties of human body. There is implemented algorithm which can be used for 3D reconstruction of magnetic resonance images in biomedical application.

Technical Training: New Course on Microsoft Access 2003 - ECDL Module 5

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005: Learning for the LHC! The CERN Technical Training programme is now proposing a new course on Microsoft Access 2003, designed for people using Access to work with databases. The course programme will include the description of the objects of an Access database, and how to work with Access, creating and using queries, tables, forms and reports. After this course, participants will be at the level of the ECDL Certificate, Database Module 5. Optionally, it will be possible to stand the ECDL examination at the CERN Training Centre. The first scheduled session of this two-day course on Microsoft Access 2003 will take place on March 15-16, 2005. The number of participants to each session is limited to 12. The course will be in English, with an English-French bilingual instructor. The course fee is 400.- CHF per person, scaling down in case of a class of more than 4 participants. The cost of the optional ECDL certification, that will take place at a subsequent date, is 112.- CHF for t...

Technical Training: New Course on Microsoft Access 2003 - ECDL Module 5

CERN Multimedia

Monique Duval

2005-01-01

CERN Technical Training 2005: Learning for the LHC! The CERN Technical Training programme is now proposing a new course on Microsoft Access 2003, designed for people using Access to work with databases. The course programme will include the description of the objects of an Access database, and how to work with Access, creating and using queries, tables, forms and reports. After this course, participants will be at the level of the ECDL Certificate, Database Module 5. Optionally, it will be possible to stand the ECDL examination at the CERN Training Centre. The first scheduled session of this two-day course on Microsoft Access 2003 will take place on March 15-16, 2005. The number of participants to each session is limited to 12. The course will be in English, with an English-French bilingual instructor. The course fee is 400.- CHF per person, scaling down in case of a class of more than 4 participants. The cost of the optional ECDL certification, that will take place at a subsequent date, is 112.- CHF for ...

Launch of technical training courses for programmers

CERN Multimedia

2015-01-01

This autumn, two new technical training courses have been launched for scientists and engineers at CERN who undertake programming tasks, particularly in C and C++. Both courses are taught by Andrzej Nowak, an expert in next-generation and cutting-edge computing technology research.   The training courses are organised in cooperation with CERN openlab and are sponsored by the CERN IT department – there is only a nominal registration fee of 50 CHF. This is an opportunity not to be missed! Computer architecture and hardware-software interaction (2 days, 26-27 October) The architecture course offers a comprehensive overview of current topics in computer architecture and their consequences for the programmer, from the basic Von Neumann schema to its modern-day expansions. Understanding hardware-software interaction allows the programmer to make better use of all features of available computer hardware and compilers. Specific architectural ...

Development of LabVIEW web-based simulator for RELAP5

Energy Technology Data Exchange (ETDEWEB)

Macedo, Luiz A.; Torres, Walmir M.; Sabundjian, Gaiane; Andrade, Delvonei A.; Belchior Junior, Antonio; Umbehaun, Pedro E.; Conti, Thadeu N.; Mesquita, Roberto N. de; Masotti, Paulo H.F.; Angelo, Gabriel, E-mail: lamacedo@ipen.b, E-mail: wmtorres@ipen.b, E-mail: gdjian@ipen.b, E-mail: delvonei@ipen.b, E-mail: abelchior@ipen.b, E-mail: umbehaun@ipen.b, E-mail: tnconti@ipen.b, E-mail: rnavarro@ipen.b, E-mail: , E-mail: masotti@ipen.b, E-mail: gabriel.angelo@usp.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

This work presents the development of a LabVIEW web-based simulator using the output results of the best estimate nuclear system analysis code, RELAP5, for graphical user interfaces and web-casting. A numerical based model designed for natural circulation studies on the thermal hydraulic experimental facility called Natural Circulation Circuit, was developed with RELAP5 code. Specific output results from RELAP5 simulation are displayed in a user friendly graphical format. The temperatures are shown as a function of time in a XY graphic. Temperatures, levels and void fractions are displayed in color-coded scale which change in time on the graphical interface representing the circuit. An alarm is set for the case of onset boiling temperature occurrence at the heater outlet. This simulator allows an easy visual understanding of the thermal hydraulic circuit behavior. It can be shared, via Web, with researchers in any geographical location and, at the same time, it can be used in learning for distance educational purposes. In future work, this LabVIEW simulator will be coupled with RELAP5 code through dll's. Simultaneous graphical displaying and code calculations will be possible. Results are presented and discussed. (author)

Development of LabVIEW web-based simulator for RELAP5

International Nuclear Information System (INIS)

Macedo, Luiz A.; Torres, Walmir M.; Sabundjian, Gaiane; Andrade, Delvonei A.; Belchior Junior, Antonio; Umbehaun, Pedro E.; Conti, Thadeu N.; Mesquita, Roberto N. de; Masotti, Paulo H.F.; Angelo, Gabriel

2011-01-01

This work presents the development of a LabVIEW web-based simulator using the output results of the best estimate nuclear system analysis code, RELAP5, for graphical user interfaces and web-casting. A numerical based model designed for natural circulation studies on the thermal hydraulic experimental facility called Natural Circulation Circuit, was developed with RELAP5 code. Specific output results from RELAP5 simulation are displayed in a user friendly graphical format. The temperatures are shown as a function of time in a XY graphic. Temperatures, levels and void fractions are displayed in color-coded scale which change in time on the graphical interface representing the circuit. An alarm is set for the case of onset boiling temperature occurrence at the heater outlet. This simulator allows an easy visual understanding of the thermal hydraulic circuit behavior. It can be shared, via Web, with researchers in any geographical location and, at the same time, it can be used in learning for distance educational purposes. In future work, this LabVIEW simulator will be coupled with RELAP5 code through dll's. Simultaneous graphical displaying and code calculations will be possible. Results are presented and discussed. (author)

Image-based fingerprint verification system using LabVIEW

Directory of Open Access Journals (Sweden)

Sunil K. Singla

2008-09-01

Full Text Available Biometric-based identification/verification systems provide a solution to the security concerns in the modern world where machine is replacing human in every aspect of life. Fingerprints, because of their uniqueness, are the most widely used and highly accepted biometrics. Fingerprint biometric systems are either minutiae-based or pattern learning (image based. The minutiae-based algorithm depends upon the local discontinuities in the ridge flow pattern and are used when template size is important while image-based matching algorithm uses both the micro and macro feature of a fingerprint and is used if fast response is required. In the present paper an image-based fingerprint verification system is discussed. The proposed method uses a learning phase, which is not present in conventional image-based systems. The learning phase uses pseudo random sub-sampling, which reduces the number of comparisons needed in the matching stage. This system has been developed using LabVIEW (Laboratory Virtual Instrument Engineering Workbench toolbox version 6i. The availability of datalog files in LabVIEW makes it one of the most promising candidates for its usage as a database. Datalog files can access and manipulate data and complex data structures quickly and easily. It makes writing and reading much faster. After extensive experimentation involving a large number of samples and different learning sizes, high accuracy with learning image size of 100 100 and a threshold value of 700 (1000 being the perfect match has been achieved.

CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

CERN Multimedia

Monique Duval

2004-01-01

Would you need to enhance your skills in Microsoft Office applications or Outlook? A 'blended learning' course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on November 9, morning. Course sessions are self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the appropriate WBT...

PLACES AVAILABLE

CERN Multimedia

Technical Training; Tel 74924

2002-01-01

Places are available in the following courses: LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 - 25.1.02 (4 jours) MS-Project 2000 : 24 & 25.01.02 (2 jours) Introduction au PC et à Windows 2000 au CERN : 29 - 30.1.02 (2 jours) LabView Base 1 : 4 - 6.2.02 (3 jours) LabView DAQ (E) : 7 & 8.02.02 (2 days) Hands-on Object-Oriented Design & Programming with Java : 11 - 13.02.02 (3 days) C++ for Particle Physicists : 11 - 15.3.2002 (6 * 3 hour lectures) Cours sur la migration AutoCAD : AutoCAD : Mise à jour AutoCAD r-14 vers 2002 (2 jours) AutoCAD Mechanical PowerPack 6 basé sur AutoCAD 2002 (5 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO ...

DOE Handbook: Guide to good practices for training of technical staff and managers

International Nuclear Information System (INIS)

1997-01-01

Training programs at DOE facilities should prepare personnel to safely and efficiently operate the facilities in accordance with DOE requirements. This guide contains information that can be used to develop or validate training programs for technical staff and managers at DOE nuclear facilities. Training programs based on the content of this guide should provide assurance that these personnel perform their jobs safely and competently

The research of binocular vision ranging system based on LabVIEW

Science.gov (United States)

Li, Shikuan; Yang, Xu

2017-10-01

Based on the study of the principle of binocular parallax ranging, a binocular vision ranging system is designed and built. The stereo matching algorithm is realized by LabVIEW software. The camera calibration and distance measurement are completed. The error analysis shows that the system fast, effective, can be used in the corresponding industrial occasions.

Cost-Benefit Analysis of a Bridge to Integrate the Management of Technical Information for Producing Technical Manuals and Training Courses

Science.gov (United States)

2010-11-01

Philadelphia, and all Computer-Based Training (CBT) courses delivered by Navy eLearning (NeL), a part of the Naval Education and Training Command (NETC...concentrated exclu- sively on the benefit side—whether the Bridge would save money in producing future technical manuals and training courses. It...of $78.1 million in 10-year costs: a savings of $86.8 million in producing future HM&E manuals and NeL-delivered courses less $8.7 million in

Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

CERN Multimedia

Monique Duval

2004-01-01

Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nati...

Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

CERN Multimedia

Monique Duval

2004-01-01

Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nat...

Nuclear spectrometry data acquisition system based on LabVIEW

International Nuclear Information System (INIS)

Zhao Dan; Shen Li; Deng Lili; Zhou Sichun

2006-01-01

The whole process of designing nuclear spectrometry data acquisition system was particularized with LabVIEW and data acquisition board, based on virtual instrument technology. It can analyze the output of the radiation detector and give the height spectrum by the method of the continuous real-time data acquisition and the abstraction of pulse signal amplitude. The simple test shows that this system can meet the demand, and it can be easily expanded according to the situation. (authors)

Education and training of the shift technical advisor

International Nuclear Information System (INIS)

Thomas, E.L.

1981-01-01

This paper discusses the background and current approaches for qualifying the required position of Shift Technical Advisor (STA). Industry positions regarding the regulation are given. Problems associated with meeting the requirement are identified, along with a discussion of other alternatives for upgrading the education level of shift management. Inherent in the discussion is the conclusion that voluntary improvements in the training and education of shift management personnel are more effective than mandatory positions or degree requirements

Labview Based ECG Patient Monitoring System for Cardiovascular Patient Using SMTP Technology.

Science.gov (United States)

Singh, Om Prakash; Mekonnen, Dawit; Malarvili, M B

2015-01-01

This paper leads to developing a Labview based ECG patient monitoring system for cardiovascular patient using Simple Mail Transfer Protocol technology. The designed device has been divided into three parts. First part is ECG amplifier circuit, built using instrumentation amplifier (AD620) followed by signal conditioning circuit with the operation amplifier (lm741). Secondly, the DAQ card is used to convert the analog signal into digital form for the further process. Furthermore, the data has been processed in Labview where the digital filter techniques have been implemented to remove the noise from the acquired signal. After processing, the algorithm was developed to calculate the heart rate and to analyze the arrhythmia condition. Finally, SMTP technology has been added in our work to make device more communicative and much more cost-effective solution in telemedicine technology which has been key-problem to realize the telediagnosis and monitoring of ECG signals. The technology also can be easily implemented over already existing Internet.

CERN Technical Training: Open Places for September 2007 Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2007. You may find the full Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=300 ) or in next weeks paper bulletin. OFFICE SOFTWARE Introduction to Dreamweaver MX (French): 3.9.-4.9.2007 (2 days, places available) CERN EDMS MTF en pratique (French): 4.9.2007 – 9:00-12:30 (1/2 day, places available) Word 2007 (Short Course III) – How to work with long documents (Bilangue): 14.9.2007 – 14:00-17:30 (1/2 day, places available) Word 2007 Niveau 1 (French): 20.9.-21-9.2007 (2 days, places available) ACCESS 2007 – Level 1: ECDL (English): 20.9.-21.9.2007 – 9:00-17:30 (2 days, places available) Excel 2007 (Short Course I) – How to work with formulae (Bilangue): 21.9.2007 – 14:00-17:30 (1/2 day, places available) CERN EDMS Introduction (English): 24.09.2007 (1 day, places available) Outlook 2007 (Short Course II) – Calendar, Task...

Incorporation of a PbSe Array Based Spectrograph into EPICS using LabView at the JLab FEL Facility

International Nuclear Information System (INIS)

Hardy, D.; Benson, S.V.; Shinn, M.D.; Zhang, S.

2005-01-01

A real-time spectrograph with a 1Hz update rate was designed and installed at the JLab FEL facility using a Cal Sensors PbSe array and a Roper Scientific SpectraPro 300 monochrometer. This paper describes the implementation of EPICS channel access on a remote PC running LabView with modification of vendor supplied LabView VI's to allow display of FEL light spectra in real-time on a remote workstation. This allows PC based diagnostics to be used in EPICS

[Realization of Heart Sound Envelope Extraction Implemented on LabVIEW Based on Hilbert-Huang Transform].

Science.gov (United States)

Tan, Zhixiang; Zhang, Yi; Zeng, Deping; Wang, Hua

2015-04-01

We proposed a research of a heart sound envelope extraction system in this paper. The system was implemented on LabVIEW based on the Hilbert-Huang transform (HHT). We firstly used the sound card to collect the heart sound, and then implemented the complete system program of signal acquisition, pretreatment and envelope extraction on LabVIEW based on the theory of HHT. Finally, we used a case to prove that the system could collect heart sound, preprocess and extract the envelope easily. The system was better to retain and show the characteristics of heart sound envelope, and its program and methods were important to other researches, such as those on the vibration and voice, etc.

The Marketability of Technical Graduates from Higher Educational Institutions (HEIs) Offering Technical and Vocational Education and Training (TVET): A Case from Malaysia

Science.gov (United States)

Rajadurai, Jegatheesan; Sapuan, Noraina Mazuin; Daud, Salina; Abidin, Nurazariah

2018-01-01

Technical, Vocational Education and Training has been viewed as a means of developing a nation. The marketability of technical graduates is reliant on whether these graduates possess the attributes demanded by their respective industries. Hence, this study aims to investigate the gap between the key attributes of Higher Education Institutions'…

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 – Novelties\t(Français)\t29.09\t1 jour Novelties Office 2007: Word 2007\t(Français)\t30.09\t1 jour Excel 2007 (Short course II) – HowTo…format your worksheet for printing\t(Bilingual)\t03.10\t0.5 day Windows Vista Advanced\t(English)\t03.10\t0.5 day Excel 2007 – Level 1 : ECDL\t(English)\t06-07.10\t2 days Project Planning with MS-Project\t(English)\t06-17.10\t2 days CERN EDMS For Local Administrators\t(French)\t08-09.10\t2 jours Excel 2007 (Short course IV) – HowTo…link cells, worksheets and workbooks (Bilingual)\t10.10\t½ day Outlook 2007 (Short course III) – Meetings and Delegation\t(Bilingual)\t10.10\t½ day Introduction to Dreamweaver MX\t(Français)\t13-14.10\t2 jours Indico – Meeting Organization\t(Français)\t15.10\t2 heures Ind...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual) 05.12\t3 hours Powerpoint 2007 – Level 1:ECDL\t(English)\t08-09.12\t2 days Windows Vista\t(Français)\t12.12\t½ jour Office 2007 – Novelties\t(Français)\t15.12\t1 jour Office 2007 – Novelties\t(English)\t08.01\t1 day Novelties of EXCEL 2007\t(English)\t09.01\t1 day WORD 2007 - level 2 : ECDL\t(Français)\t12-13.01\t2 jours EXCEL 2007 - Level 2: ECDL\t(English)\t15-16.01\t2 days Novelties Office 2007: WORD 2007\t(Français)\t19.01\t1 jour EXCEL 2007 - level 1 : ECDL\t(English)\t20-21.01\t2 days Sharepoint Collaboration Workspace\t(Fran�...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007 – Niveau 2 : ECDL\t(Français)\t08-09.09\t2 jour Excel 2007 (short course I) – HowTo..Work with formulae\t(Bilingual)\t15.09\t1 day Sharepoint Collaboration Workspace\t(English)\t15-16.09\t1 ½ day Windows Vista Advanced\t(Français)\t15.09\t0.5 jour Novelties of Excel 2007\t(English)\t16.09\t1 day WORD 2007 (Short Course III) - HowTo... Work with long documents\t(Bilingual)\t19.09\t3 hours Word 2007 – Level 1 : ECDL\t(Français)\t22-23.09\t2 jours Excel 2007 (Short course II) – HowTo…format your worksheet for printing\t(Bilingual)\t03.10\t0.5 day Windows Vista Advanced\t(English)\t03.10\t0.5 day Excel 2007 – Level 1 : ECDL\t(English)\t06-07.10\t2 days Project Planning with MS-Project\t(English)\t06-17.10\t2 d...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 1: ECDL\t(Français)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual) 05.12\t3 hours Powerpoint 2007 – Level 1:ECDL\t(English)\t08-09.12\t2 days Windows Vista\t(Français)\t12.12\t½ jour Windows Vista Advanced\t(Français)\t12.12\t½ jour Office 2007 – Novelties\t(Français)\t15.12\t1 jour SOFTWARE AND SYSTEM TECHNOLOGIES Business Objects Basics\t(Français)\t17-1...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 1: ECDL\t(Français)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual) 05.12\t3 hours Powerpoint 2007 – Level 1:ECDL\t(English)\t08-09.12\t2 days Windows Vista\t(Français)\t12.12\t½ jour Windows Vista Advanced\t(Français)\t12.12\t½ jour Office 2007 – Novelties\t(Français)\t15.12\t1 jour SOFTWARE AND SYSTEM TECHNOLOGIES Business Objects Basics\t(Français)\t17-18...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Secure e-mail and Web browsing\t(English)\t22.04\t1.5 hour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workbook\t(Bilingual)\t30.04\t0.5 jour/day Word 2007 – Level 2 : ECDL\t(English)\t04-05.05\t2 days Exc...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours Novelties of Excel\t(Français)\t09.05\t1 jour In Design: Introduction (Français)\t13-14.05\t2 jours Windows Vista\t(Français)\t20.05\t0.5 jour Sharepoint Designer (Frontpage) – Level 1\t(English)\t29-30.05\t2 days Word 2007 – Level 2 : ECDL\t(English)\t02-03.06\t2 days Excel 2007 – Niveau 2 ECDL\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Word 2007 (Short Course III) – HowTo….Work with long documents\t(Bilingual)\t09.06\t0.5 day Sharepoint Designer (Frontpage) – Level 1 ECDL\t(English)\t29-30.05\t2 days PowerPoint 2007 – Level 1: ECDL\t(Français)\t19-20.06\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES XML Introduction...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 – Niveau 1 : ECDL\t(Français)\t27-28.05\t2 jours Sharepoint Designer (Frontpage) – Level 1\t(English)\t29-30.05\t2 days Sharepoint Collaborative Services\t(Francais)\t02-03.06\t2 days Indico – Meting Organization\t(Français)\t03.06\t2 heures Indico – Conference Organization\t(Français)\t03.06\t3 heures Introduction to Dreamweaver MX\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Word 2007 (Short Course III) – HowTo….Work with long documents\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Level 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(English)\t12-13.06\t2 days PowerPoint 2007 – Niveau 1: ECDL\t(Français)\t19-20.06\t2 jours Exce...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE In Design: Introduction (Français)\t13-14.05\t2 jours Windows Vista\t(Français)\t20.05\t0.5 jour ACCESS 2007 – Level 1 : ECDL\t(Français)\t27-28.05\t2 jours Sharepoint Designer (Frontpage) – Level 1\t(English)\t29-30.05\t2 days Word 2007 – Level 2 : ECDL\t(English)\t02-03.06\t2 days Indico – Meting Organization\t(Français)\t03.06\t2 heures Indico – Conference Organization\t(Français)\t03.06\t3 heures Excel 2007 – Niveau 2 ECDL\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Word 2007 (Short Course III) – HowTo….Work with long documents\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Level 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(Englis...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS – Introduction\t(Français)\t26.06\t1 jour Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours CERN EDMS MTF in practice\t(Français)\t27.06\t½ journée A hands-on overview of EVO\t(English)\t27.06\t½ day CERN EDMS for Local Administrators\t(Français)\t30.06-01.07\t2 jours Excel 2007 – Level 2 ECDL\t(English)\t30.06-01.07\t2 days Access 2007 – Niveau 2: ECDL\t(Français)\t01-04.07\t4 ½ journées Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days Windows Vista Advanced\t(Français)\t10.07\t½ journée Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES JCOP – Finite State Machines in the JCOP Framework\t(English)\t24-26.06\t3 days ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Collaborative Services\t(Francais)\t02-03.06\t2 days Indico – Meting Organization\t(Français)\t03.06\t2 heures Indico – Conference Organization\t(Français)\t03.06\t3 heures Introduction to Dreamweaver MX\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course II) – Calendar, Tasks and Notes\t(Bilingue)\t09.06\t½ day/jour Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Niveau 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(English)\t12-13.06\t2 days PowerPoint 2007 – Niveau 1: ECDL\t(Français)\t19-20.06\t2 jours Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours A hands-on overview of EVO\t(English)\t27.06\t½ day Excel 2007 – Level...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Secure e-mail and Web browsing\t(English)\t22.04\t1.5 hour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workbook\t(Bilingual)\t30.04\t0.5 jour/day...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS – Introduction\t(English)\t05.06\t1 day Sharepoint Collaboration Workspace\t(Français)\t08-09.06\t2 jours Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t12.06\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workbook\t(Bilingual)\t12.06\t0.5 jour/day Word 2007 – Level 1: ECDL\t(Français)\t15-16.06\t2 jours CERN EDMS for Local Administrators\t(English)\t16-17.06\t2 days EXCEL 2007 – Level 1: ECDL\t(Français)\t18-19.06\t2 jours EXCEL 2007 – Level 2: ECDL\t(English)\t25-26.06\t2 days CERN EDMS ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 1: ECDL\t(Français)\t15-16.06\t2 jours CERN EDMS for Local Administrators\t(English)\t16-17.06\t2 days EXCEL 2007 – Level 2: ECDL\t(English)\t25-26.06\t2 days CERN EDMS for Engineers\t(English)\t26.06\t1 day Office 2007 – Novelties\t(French)\t29.06\t1 day Novelties of Excel 2007\t(Français)\t30.06\t1 jour EXCEL 2007 – level 1: ECDL\t(Français)\t06-7.07\t2 jours Indico – Meeting Organization\t(English)\t07.07\t2 hours Indico – Conference Organization\t(Français)\t07.07\t3 hours CERN EDMS MTF in practice\t(Français)\t08.07\t3.5 heures SOFTWARE AND SYSTEM TECHNOLOGIES Web Applications with Oracle Application Express (APEX) 3.2\t(English)\t16-19.06\t4 days JCOP – Finite State Machines in the JCOP...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE PowerPoint 2007 – Niveau 1: ECDL\t(Français)\t19-20.06\t2 jours Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours A hands-on overview of EVO\t(English)\t27.06\t½ day Excel 2007 – Level 2 ECDL\t(English)\t30.06-01.07\t2 days Access 2007 – Niveau 2: ECDL\t(Français)\t01-04.07\t4 ½ journées Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days Windows Vista Advanced\t(Français)\t10.07\t½ jour Windows Vista\t(Français)\t11.07\t½ jour SOFTWARE AND SYSTEM TECHNOLOGIES Python-Hands-on Introduction\t(English)\t16-18.06\t3 days JCOP – Finite State Machines in the JCOP Framework\t(English)\t24-26.06\t3 days Oracle 10g Certified Professional\t(English)\t30.06-04.07\t5 days Advanced Python-Hands-on\t(English)\t0...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t30.01\t3 heures ½ EXCEL 2007 level 1: ECDL\t(English)\t02-03.02\t2 days WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES Oracle – SQL\t(English)\t02-04.02\t3 days Oracle Databases: Memory Management (10g & 11g) (English)\t05-06.02\t2 days JAVA 2 Enterprise Edition – Part 1: Web Applications\t(English)\t09-10.02\t2 days JCOP – Joint PVSS-JCOP Framework\t(English)\t09-13.02\t3 ½ da...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Secure e-mail and Web browsing\t(English)\t22.04\t1.5 hour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day Excel 2007 (Short Course IV) – HowT...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE WORD 2007 - level 2 : ECDL\t(Français)\t12-13.01\t2 jours EXCEL 2007 - Level 2: ECDL\t(English)\t15-16.01\t2 days Novelties Office 2007: WORD 2007\t(Français)\t19.01\t1 jour Windows Vista\t(Français)\t30.01\t3 heures ½ EXCEL 2007 level 1: ECDL\t(English)\t02-03.02\t2 days WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES Linux System Administration\t(English)\t22-27.01\t4 days Oracle – SQL\t(English)\t02-04.02\t3 days Oracle Databases: Memory Management (10g & 11g) (English)\t05-06.02\t2 days JAVA 2 Enterprise Edition – Part 1: Web Applications\t(English)\t09-10.02\t2 days ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Outlook 2007 (Short Course II) – Calendar, Tasks and Notes\t(Bilingue)\t09.06\t½ day/jour Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Niveau 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(English)\t12-13.06\t2 days PowerPoint 2007 – Niveau 1: ECDL\t(Français)\t19-20.06\t2 jours Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours A hands-on overview of EVO\t(English)\t27.06\t½ day Excel 2007 – Level 2 ECDL\t(English)\t30.06-01.07\t2 days Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days Windows Vista\t(Français)\t11.07\t½ jour SOFTWARE AND SYSTEM TECHNOLOGIES Java – Level 2\t(English)\t9-12.06\t4 days ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE EXCEL 2007 – Level 2: ECDL\t(English)\t25-26.06\t2 days CERN EDMS for Engineers\t(English)\t26.06\t1 day Office 2007 – Novelties\t(French)\t29.06\t1 day Novelties of Excel 2007\t(Français)\t30.06\t1 jour EXCEL 2007 – level 1: ECDL\t(Français)\t06-7.07\t2 jours Indico – Meeting Organization\t(English)\t07.07\t2 hours Indico – Conference Organization\t(Français)\t07.07\t3 hours CERN EDMS MTF in practice\t(Français)\t08.07\t3.5 heures SOFTWARE AND SYSTEM TECHNOLOGIES JCOP – Finite State Machines in the JCOP Framework\t(English)\t23-25.06\t3 days XML – Introduction\t(English)\t25-26.06\t2 days Business Object Basic\t(French)\t29-30.06\t2 jours JCOP – Joint PVSS-JCOP Framework\t(English)\t29.06-03.07\t4.5 days MECHA...

CERN Technical Training: available places in forthcoming courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 1 : ECDL\t(Français)\t22-23.09\t2 jours Novelties Office 2007: Word 2007\t(Français)\t30.09\t1 jour Excel 2007 (Short course II) – HowTo…format your worksheet for printing\t(Bilingual)\t03.10\t0.5 day Windows Vista Advanced\t(English)\t03.10\t0.5 day Excel 2007 – Level 1 : ECDL\t(English)\t06-07.10\t2 days Project Planning with MS-Project\t(English)\t06-17.10\t2 days CERN EDMS For Local Administrators\t(French)\t08-09.10\t2 jours Excel 2007 (Short course IV) – HowTo…link cells, worksheets and workbooks (Bilingual)\t10.10\t½ day Outlook 2007 (Short course III) – Meetings and Delegation\t(Bilingual)\t10.10\t½ day Introduction to Dreamweaver MX\t(Français)\t13-14.10\t2 jours Indico – Meeting Organization\t(Français)\t15.10\t2 heu...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\t3\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\t2\tEnglish Developing secure software\t14-Sep-09\t14-Sep-09\t0.5\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\t1\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish ITIL Foundations (version 3)\t14-Sep-09\t16-Sep-09\t3\tEnglish ITIL Foundations (version 3)\t12-Oct-09\t14-Oct-09\t3\tEnglish ITIL Foundations (version 3)\t18-Nov-09\t20-Nov-09\t3\tEnglish JAVA...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\t3\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\t2\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish Developing secure software\t14-Sep-09\t14-Sep-09\t0.5\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\t1\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish ITIL Foundations (version 3)\t14-Sep-09\t16-Sep-09\t3\tEnglish ITIL Foundations (version 3)\t12-Oct-09\t14-Oct-09\t3\tEnglish ITIL Foundations (version 3)\t18-Nov-09\t20-Nov-09\t3\tEng...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t0.5 jour Windows VISTA (Français)\t04.04\t1 jour Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduction (Français)\t13-14.05\t2 jours Sharepoint Col...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). CERN EDMS for Local Administrators (English) 27-28.03 2 days Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t0.5 jour Windows VISTA (Français)\t04.04\t1 jour Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduct...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\tEnglish\t3 days Certification: Ingénieur en Sécurité Fonctionnelle\t07-JUN-10\t10-JUN-10\tFrench\t4 jours Emacs - way beyond Text Editing\t16-JUL-10\t16-JUL-10\tEnglish\t1 day ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA - Level 2\t05-JUL-10\t08-JUL-10\tEnglish\t4 days JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t31-MAY-10\t04-JUN-10\tEnglish\t4.5 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglis...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t18-Oct-10\t19-Oct-10\ttbc\t2 days Business Objects Advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA 2 Entreprise Edition - Part 1: Web Applications\t27-Oct-10\t29-Oct-10\tEnglish\t2 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4,5 days Oracle Database SQL Tuning\t25-Oct-10\t27-Oct-10\tEnglish\t3 days Oracle Databases: Advanced PL/SQL Programming\t27-Sep-10\t29-Sep-10\tEnglish\t3 days PERL 5 - Introduction 25-Oct-10\t26-Oct-10\tEnglish\t2 days Python - Hands-on Introduction\t18-Oct-10\t21-Oct-10\tEnglish\t4 days Secure coding in C/C++\t12-Oct-10\t13-Oct-...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum\t15-Nov-10\t16-Nov-10\tEnglish\t2 days Business Objects advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 2: Object-Oriented and Generic Programming\t22-Nov-10\t25-Nov-10\tEnglish\t4 days CERN openlab Multi-threading and Parallelism Workshop\t10-Nov-10\t11-Nov-10\tEnglish\t2 days Emacs - way beyond Text Editing\t09-DEC-10\t09-DEC-10\tEnglish\t3 days ITIL Foundations (version 3)\t22-Nov-10\t24-Nov-10\tEnglish\t1 day ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour ITIL Foundations (version 3) EXAMINATION\t13-DEC-10\t13-DEC-10\tEnglish\t1 hour JAVA - Level 1\t25-Nov-10\t29-Nov-10\tEnglish\t3 days JAVA 2 Enterprise Edition - Part 1: Web Applications\t27-Oct-10\t28-Oct-10\tEnglish\t2 days JAVA 2 Enterprise Edition - Part 2: ...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2011-01-01

The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t08-Feb-11\t09-Feb-11\tEnglish\t2 days Introduction to Databases and Database Design\t10-Mar-11\t11-Mar-11\tEnglish\t2 days JAVA - Level 2\t17-Jan-11\t20-Jan-11\tEnglish\t4 days JCOP-Joint PVSS-JCOP Framework\t14-Mar-11\t18-Mar-11\tEnglish\t4.5 days ORACLE-SQL\t16-Mar-11\t18-Mar-11\tEnglish\t3 days Oracle Databases: Advanced PL/SQL Programming\t21-Mar-11\t23-Mar-11\tEnglish\t3 days Linux LPI 101 - Introduction à Linux et LPI 102 Administration systèmes sur Linux\t8-Mar-11\t11-Mar-11\tFrançais\t4 jours Electronic design Siemens - STEP7: Level 1\t15-feb-11\t18-feb-11\tFrançais\t4 jours Mechanical Design ANSYS Workbench advanced\t31-Jan-11\t03-Feb-11\tEnglish\t4 days ANS...

CERN Technical Training: available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum,\t11-FEB-10\t12-FEB-10,\t2 days,\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop,\t09-FEB-10\t10-FEB-10,\t2 days,\tEnglish Developing secure software,\t22-Mar-10\t22-Mar-10,\t1.5 hour,\tEnglish Introduction to Databases and Database Design,\t11-Mar-10\t12-Mar-10,\t2 days,\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans,\t22-Mar-10\t24-Mar-10,\t3 days,\tEnglish JCOP - Finite State Machines in the JCOP Framework,\t9-Mar-10\t11-Mar-10,\t3 days,\tEnglish JCOP - Joint PVSS-JCOP Framework,\t22-FEB-10\t26-FEB-10,\t4.5 days,\tEnglish Object-Oriented Analysis and Design using UML,\t22-Mar-10\t24-Mar-10,\t3 days,\tEnglish Secure coding for Java,\t12-FEB-10\t12-FEB-10,\t1 day, English Secure coding for Perl,\t10...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2011-01-01

The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t21-Feb-11\t22-Feb-11\t2 days\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t15-Feb-11\t16-Feb-11\t2 days\tEnglish Introduction to Databases and Database Design\t10-Mar-11\t11-Mar-11\t2 days\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t16-Mar-11\t18-Mar-11\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t5-Apr-11\t7-Apr-11\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t14-Mar-11\t18-Mar-11\t4.5 days\tEnglish Linux LPI 101 - Introduction à Linux et LPI 102 Administration systèmes sur Linux\t8-Mar-11\t11-Mar-11\t4 days\tEnglish Oracle - SQL\t16-Mar-11\t18-Mar-11\t3 days\tEnglish Oracle Databases: Advanced PL/SQL Programming\t21-Mar-11\t23-Mar-11\t3 days\tEnglish El...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum\t15-Nov-10\t16-Nov-10\tEnglish\t2 days Business Objects advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 2: Object-Oriented and Generic Programming\t22-Nov-10\t25-Nov-10\tEnglish\t4 days CERN openlab Multi-threading and Parallelism Workshop\t9-Nov-10\t10-Nov-10\tEnglish\t2 days ITIL Foundations (version 3)\t22-Nov-10\t24-Nov-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA - Level 1\t25-Nov-10\t29-Nov-10\tEnglish\t3 days JAVA 2 Enterprise Edition - Part 1: Web Applications\t27-Oct-10\t28-Oct-10\tEnglish\t2 days JCOP - Finite State Machines in the JCOP Framework\t17-Nov-10\t19-Nov-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4.5 days Linux LPI 101 - Introdu...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t18-Oct-10\t19-Oct-10\ttbc\t2 days Business Objects Advanced\t31.aug.10\t31.aug.10\tEnglish\t1 day Business Objects Advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 1 - Hands-On Introduction\t20-Sep-10\t23-Sep-10\tEnglish\t4 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days Developing secure software\t6-Sep-10\t6-Sep-10\tEnglish\t3,5 hours ISTQB International Software Testing Qualifications Board\t13-Sep-10\t16-Sep-10\tEnglish\t4 days ITIL Foundations (version 3)\t4-Oct-10\t6-Oct-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA 2 Entreprise Edition - Part 1: Web Applications\t27-Oct-10\t29-Oct-10\tEnglish\t2 days JCOP - Joint PVSS-JCOP Framew...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2011-01-01

The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 1 - Hands-On Introduction\t25-Jan-11\t28-Jan-11\tEnglish\t4 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t15-Feb-11\t16-Feb-11\tEnglish\t2 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t08-Feb-11\t09-Feb-11\tEnglish\t2 days JAVA - Level 2\t17-Jan-11\t20-Jan-11\tEnglish\t4 days Python - Hands-on Introduction\t07-Feb-11\t10-Feb-11\tEnglish\t4 days Secure coding for Java\t12-Jan-11\t12-Jan-11\tEnglish\t1 day Secure coding for PHP\t14-Jan-11\t14-Jan-11\tEnglish\t1 day Secure coding for Python\t13-Jan-11\t13-Jan-11\tEnglish\t0.5 day Secure coding for Python\t13-Jan-11\t13-Jan-11\tEnglish\t0.5 day Electronic design Technologie S-Web\t12-Jan-11\t13-Jan-11\tFrench\t2 jours Mechanical Design ANSYS Workbench advanced\t31-Jan...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2011-01-01

The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies JCOP - Finite State Machines in the JCOP Framework\t05-APR-11\t07-APR-11\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t09-MAY-11\t13-MAY-11\t4.5 days\tEnglish Object-oriented Design Patterns\t11-APR-11\t13-APR-11\t3 days\tEnglish Python - Hands-on Introduction\t09-MAY-11\t12-MAY-11\t4 days\tEnglish Python: Advanced Hands-On\t28-Mar-11\t31-Mar-11\t4 days\tEnglish JAVA - Level 1\t13-APR-11\t15-APR-11\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t24-MAY-11\t26-MAY-11\t3 days\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t09-MAY-11\t10-MAY-11\t2 days\tEnglish ITIL Foundations (version 3)\t09-MAY-11\t11-MAY-11\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t23-MAY-11\t23-MAY-11\t1 hour\tEnglish Dealing efficiently with Oracle Performance Iss...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 2: Object-Oriented and Generic Programming\t22-Nov-10\t25-Nov-10\tEnglish\t4 days CERN openlab Multi-threading and Parallelism Workshop\t9-Nov-10\t10-Nov-10\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days ITIL Foundations (version 3)\t22-Nov-10\t24-Nov-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA - Level 1\t25-Nov-10\t29-Nov-10\tEnglish\t3 days JAVA 2 Enterprise Edition - Part 1: Web Applications\t27-Oct-10\t28-Oct-10\tEnglish\t2 days JCOP - Finite State Machines in the JCOP Framework\t17-Nov-10\t19-Nov-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t18-Oct-10\t19-Oct-10\ttbc\t2 days Business Objects advanced\t20-Oct-10\t20-Oct-10\ttbc\t1 day C++ Part 1 - Hands-On Introduction\t20-Sep-10\t23-Sep-10\tEnglish\t4 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days Developing secure software\t6-Sep-10\t6-Sep-10\tEnglish\t3,5 hours ISTQB International Software Testing Qualifications Board\t13-Sep-10\t16-Sep-10\tEnglish\t4 days ITIL Foundations (version 3)\t4-Oct-10\t6-Oct-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JCOP - Joint PVSS-JCOP Framework\t30-AUG-10\t3-Sep-10\tEnglish\t4,5 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4,5 days Oracle Database SQL Tuning\t25-Oct-10\t27-Oc...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\tEnglish\t3 days Certification: Ingénieur en Sécurité Fonctionnelle\t07-JUN-10\t10-JUN-10\tFrench\t3.5 jours Emacs - way beyond Text Editing\t16-JUL-10\t16-JUL-10\tEnglish\t1 day ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA - Level 2\t05-JUL-10\t08-JUL-10\tEnglish\t4 days JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t31-MAY-10\t04-JUN-10\tEnglish\t4.5 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEngl...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\tEnglish\t3 days ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t31-MAY-10\t04-JUN-10\tEnglish\t4.5 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglish\t4 days Object-oriented Design Patterns\t10-MAY-10\t12-MAY-10\tEnglish\t3 days Oracle - Programming with PL/SQL\t28-JUN-10\t30-JUN-10\tEnglish\t3 days Oracle Certified Professional\t07-JUN-10\t11-JUN-10\tEnglish\t5 days Project Development using ...

CERN Technical training: available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 1 - Hands-On Introduction\t17-Mar-10\t19-Mar-10\t3 days\tEnglish Developing secure software\t22-Mar-10\t22-Mar-10\t0.5 day\tEnglish Emacs - way beyond Text Editing\t26-Mar-10\t26-Mar-10\t1 day English Introduction to Databases and Database Design\t11-Mar-10\t12-Mar-10\t2 days\tEnglish ITIL Foundations (version 3)\t8-Mar-10\t10-Mar-10\t3 days\tEnglish ITIL Foundations (version 3)\t12-APR-10\t29-APR-10\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t25-Mar-10\t25-Mar-10\t1 hour\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t22-Mar-10\t24-Mar-10\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t9-Mar-10\t11-Mar-10\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t27-APR-10\t29-APR-10\t3 days\tEnglish JCOP - Joint PVS...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum\t11-FEB-10\t12-FEB-10\t2 days\tEnglish C++ Part 1 - Hands-On Introduction\t17-Mar-10\t19-Mar-10\t3 days\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t09-FEB-10\t10-FEB-10\t2 days\tEnglish Developing secure software\t22-Mar-10\t22-Mar-10\t0.5 day\tEnglish Emacs - way beyond Text Editing\t26-Mar-10\t26-Mar-10\t1 day English Introduction to Databases and Database Design\t11-Mar-10\t12-Mar-10\t2 days\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t22-Mar-10\t24-Mar-10\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t9-Mar-10\t11-Mar-10\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t22-FEB-10\t26-FEB-10\t5 days\tEnglish Object-Oriented Analysis and Design using UML\t23-Mar-10\t25...

CERN Technical training: available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum\t11-FEB-10\t12-FEB-10\t2 days\tEnglish C++ Part 1 - Hands-On Introduction\t17-Mar-10\t19-Mar-10\t2 days\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t09-FEB-10\t10-FEB-10\t2 days\tEnglish Developing secure software\t22-Mar-10\t22-Mar-10\t2 days\tEnglish Emacs - way beyond Text Editing\t26-Mar-10\t26-Mar-10\t2 days\tEnglish Introduction to Databases and Database Design\t11-Mar-10\t12-Mar-10\t2 days\tEnglish ITIL Foundations (version 3)\t8-Mar-10\t10-Mar-10\t3 days\tEnglish ITIL Foundations (version 3)\t12-APR-10\t29-APR-10\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t25-Mar-10\t25-Mar-10\t1 hour\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t22-Mar-10\t24-Mar-10\t3 days\tEnglish JCOP - Fi...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Certification: Ingénieur en Sécurité Fonctionnelle\t07-JUN-10\t10-JUN-10\tFrench\t3.5 jours Emacs - way beyond Text Editing\t16-JUL-10\t16-JUL-10\tEnglish\t1 day ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA - Level 2\t05-JUL-10\t08-JUL-10\tEnglish\t4 days JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglish\t4 days Oracle - Programming with PL/SQL\t28-JUN-10\t30-JUN-10\tEnglish\t3 days Oracle Certified Professional\t07-JUN-10\t11-JUN-10\tEnglish\t5 days Project Devel...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You can find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Indico – Meeting Organisation\t(Français)\t02.03\t2 heures Indico – Conference Organisation\t(English)\t02.03\t3 hours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(Français)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(Engli...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Indico – Meeting Organization\t(Français)\t02.03\t3 heures Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(Français)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the J...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Introduction to Dreamweaver MX\t(Français)\t13-14.10\t2 jours Indico – Meeting Organization\t(Français)\t15.10\t2 heures Indico – Conference Organization\t(Français)\t15.10\t3 heures Sharepoint Designer (Frontpage) – Level 1\t(Français)\t16-17.10\t2 jours Word 2007 – Niveau 2 : ECDL\t(Français)\t20-21.10\t2 jours Novelties Office 2007 : PowerPoint 2007 (English)\t27.10\t1 day Sharepoint Collaboration Workspace\t(Français)\t06-07.11\t1 ½ day Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Excel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Word 2007 (Short course II) – HowTo…Mail merge (Bilingual)\t14.11 ½ day Sharepoint Designer (Frontpage) – Niveau 2\t(Français)\t17-18.11\t2 jours Word 2007 ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the J...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007 – Level 1 : ECDL\t(French)\t06-07.10\t2 jours Project Planning with MS-Project\t(English)\t06-10.10\t2 days CERN EDMS For Local Administrators\t(French)\t08-09.10\t2 jours Excel 2007 (Short course IV) – HowTo…link cells, worksheets and workbooks (Bilingual)\t10.10\t½ day Outlook 2007 (Short course III) – Meetings and Delegation\t(Bilingual)\t10.10\t3 hours Introduction to Dreamweaver MX\t(Français)\t13-14.10\t2 jours Indico – Meeting Organization\t(Français)\t15.10\t2 heures Indico – Conference Organization\t(Français)\t15.10\t3 heures Word 2007 – Niveau 2 : ECDL\t(Français)\t20-21.10\t2 jours Novelties Office 2007 : PowerPoint 2007 (English)\t27.10\t1 day Sharepoint Collaboration Workspace\t(Français)\t06-07.11\t1 ½ day Excel 2007 ...

Organising, Providing and Evaluating Technical Training for Early Career Researchers: A Case Study

Science.gov (United States)

van Besouw, Rachel M.; Rogers, Katrine S.; Powles, Christopher J.; Papadopoulos, Timos; Ku, Emery M.

2013-01-01

This paper considers the importance of providing technical training opportunities for Early Career Researchers (ECRs) worldwide through the case study of a MATLAB training programme, which was proposed, organised, managed and evaluated by a team of five ECRs at the University of Southampton. The effectiveness of the programme in terms of the…

The design of virtual double-parameter nuclear spectrum acquisition system based on LabVIEW

International Nuclear Information System (INIS)

Liu Songqiu; Chen Chuan; Lei Wuhu

2001-01-01

This paper introduces the design of virtual double-parameter nuclear spectrum acquisition system based on LabVIEW and NI multifunction DAQ board, and the use of it to measure the double-parameter nuclear spectrum

Simulator training and non-technical factors improve laparoscopic performance among OBGYN trainees.

Science.gov (United States)

Ahlborg, Liv; Hedman, Leif; Nisell, Henry; Felländer-Tsai, Li; Enochsson, Lars

2013-10-01

To investigate how simulator training and non-technical factors affect laparoscopic performance among residents in obstetrics and gynecology. In this prospective study, trainees were randomized into three groups. The first group was allocated to proficiency-based training in the LapSimGyn(®) virtual reality simulator. The second group received additional structured mentorship during subsequent laparoscopies. The third group served as control group. At baseline an operation was performed and visuospatial ability, flow and self-efficacy were assessed. All groups subsequently performed three tubal occlusions. Self-efficacy and flow were assessed before and/or after each operation. Simulator training was conducted at the Center for Advanced Medical Simulation and Training, Karolinska University Hospital. Sterilizations were performed at each trainee's home clinic. Twenty-eight trainees/residents from 21 hospitals in Sweden were included. Visuospatial ability was tested by the Mental Rotation Test-A. Flow and self-efficacy were assessed by validated scales and questionnaires. Laparoscopic performance was measured as the duration of surgery. Visuospatial ability, self-efficacy and flow were correlated to the laparoscopic performance using Spearman's correlations. Differences between groups were analyzed by the Mann-Whitney U-test. No differences across groups were detected at baseline. Self-efficacy scores before and flow scores after the third operation were significantly higher in the trained groups. Duration of surgery was significantly shorter in the trained groups. Flow and self-efficacy correlate positively with laparoscopic performance. Simulator training and non-technical factors appear to improve the laparoscopic performance among trainees/residents in obstetrics and gynecology. © 2013 Nordic Federation of Societies of Obstetrics and Gynecology.

Factors influencing effective learning in instructional skill training for vocational instructors : learning for change : a case of Training Institute for Technical Instruction (TITI), Bhaktapur, Nepal