WorldWideScience

Sample records for technical performance evaluation

  1. Performance Evaluation of Indian Technical Institutions Using PROMETHEE-GAIA Approach

    Science.gov (United States)

    Ranjan, Rajeev; Chakraborty, Shankar

    2015-01-01

    It has now become an important issue to evaluate the performance of technical institutions to develop better research and enrich the existing teaching processes. The results of such performance appraisal would serve as a reference point for decisions to choose a particular institution, hire manpower, and provide financial support for the…

  2. A test to evaluate the physical impact on technical performance in soccer

    DEFF Research Database (Denmark)

    Rostgaard, Thomas; Iaia, F. Marcello; Simonsen, Dennis S.

    2008-01-01

    The aim of the study was to develop and examine a test for evaluation of the physical and technical capacity of soccer players. Fourteen youth elite (YE) and seven sub-elite (SE) players performed a physical and technical test (PT-test) consisting of 10 long kicks interspersed with intense...... intermittent exercise. In addition, a control test (CON-test) without intense exercise was performed. In both cases, the test result was evaluated by the precision of the 10 kicks. The players also performed the Yo-Yo intermittent recovery test level 2 (Yo-Yo IR2). For the SE-players, blood samples were...... obtained and heart rate was measured before, during, and after the PT-test. A muscle biopsy was collected before and after the PT-test. Coefficient of variation for the PT- and CON-test was 11.7% and 16.0%, respectively. The YE-players performed better (P test (16...

  3. Formative evaluation of a telemedicine model for delivering clinical neurophysiology services part I: utility, technical performance and service provider perspective.

    LENUS (Irish Health Repository)

    Breen, Patricia

    2010-01-01

    Formative evaluation is conducted in the early stages of system implementation to assess how it works in practice and to identify opportunities for improving technical and process performance. A formative evaluation of a teleneurophysiology service was conducted to examine its technical and sociological dimensions.

  4. Prospective observational study to evaluate NOTSS (Non-Technical Skills for Surgeons) for assessing trainees' non-technical performance in the operating theatre.

    Science.gov (United States)

    Crossley, J; Marriott, J; Purdie, H; Beard, J D

    2011-07-01

    Most surgical assessment has been aimed at technical proficiency. However, non-technical skills also affect patient safety and clinical effectiveness. The NOTSS (Non-Technical Skills for Surgeons) assessment instrument was developed specifically to assess the non-technical skills of individual surgeons in the operating theatre. This study evaluated NOTSS as a real-world assessment, with a mix of minimally trained assessors. The evaluation criteria were feasibility, validity and psychometric reliability. In a standard evaluation of NOTSS, 56 anaesthetists, 39 scrub nurses, two surgical care practitioners and three independent assessors provided 715 assessments of 404 surgical cases of 15 index procedures across six specialties performed by 85 surgical trainees. The assessment was feasible, but important implementation challenges were highlighted. Most respondents considered the method valid, but with reservations about assessing cognition. The factor structure of scores, and their positive relationships with other measures of experience and performance, supported validity. Trainees' non-technical skill scores were relatively procedure-independent and achieved good reliability (generalizability coefficient 0·8 or more) when six to eight assessors observed one case each. Minimally trained assessors, who are typically present in operating theatres, were sufficiently discriminating and consistent in their judgements of trainee surgeons' non-technical skills to provide reliable scores based on an achievable number of observations. Copyright © 2011 British Journal of Surgery Society Ltd. Published by John Wiley & Sons, Ltd.

  5. Performance evaluation of the technical capabilities of DOE sites for disposal of mixed low-level waste. Volume 2: Technical basis and discussion of results

    International Nuclear Information System (INIS)

    Waters, R.D.; Gruebel, M.M.; Hospelhorn, M.B.

    1996-03-01

    A team of analysts designed and conducted a performance evaluation to estimate the technical capabilities of fifteen Department of Energy sites for disposal of mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Volume 1 summarizes the process for selecting the fifteen sites, the methodology used in the evaluation, and the conclusions derived from the evaluation. Volume 2 first describes the screening process used to determine the sites to be considered in the PEs. This volume then provides the technical details of the methodology for conducting the performance evaluations. It also provides a comparison and analysis of the overall results for all sites that were evaluated. Volume 3 contains detailed evaluations of the fifteen sites and discussions of the results for each site

  6. The utilization of performance evaluation instruments by technical trainers to evaluate maintenance personnel in the nuclear power industry in the United States

    International Nuclear Information System (INIS)

    Hornberger, C.K.

    1993-01-01

    The purpose of this study was to document the utilization of performance evaluation instruments by technical trainers in the evaluation of maintenance personnel in US nuclear power plants. Performance evaluation of maintenance personnel has been identified by nuclear utilities and the Nuclear Regulatory Commission as the only acceptable method of determining worker competence. The NRC requires performance evaluation to be conducted to performance standards, but it does not specify the standards or the method to be utilized. Each plant is free to establish its own standards and methods of evaluation. This was a descriptive study utilizing descriptive statistics for the analysis of the data. The subjects included 655 maintenance trainers in 72 US nuclear plants. Conclusions of the study include: (1) Technical trainers are in compliance with NRC regulations. (2) Evaluation materials developed by the Institute of Nuclear Power Operations are used by technical trainers in every one of the 62 plants that responded. (3) In-plant or self-developed Performance Evaluation Instruments are utilized by 419 or 95.2% of the technical trainers. (4) Technical trainers incorporate nine common components into their Performance Evaluation Instruments. (5) Technical trainers evaluate maintenance processes and the product produced by workers when following procedures and specifications are critical and when safety hazards are involved. (6) Technical trainers believe that utilizing Performance Evaluation Instruments makes their job easier by providing documentation about the quality and standards of maintenance skills. (7) Technical trainers believe that maintenance workers benefit when their skills are assessed through the use of Performance Evaluation Instruments

  7. Evaluating the Impact of Outsourcing Strategy on Procurement Performance of Selected Technical Universities in Ghana

    OpenAIRE

    Prempeh, Kwadwo Boateng; Nsiah-Asare, Evelyn

    2017-01-01

    Due to globalization, outsourcing has become one of the widely embraced strategies for delivering outstanding services in the educational sector. However, in spite of the increasing trend in outsourcing arrangements, there are inadequate literature underpinnings on how outsourcing activities affect the performance of educational institutions in Ghana. In order to bridge that gap, this research seeks to evaluate the effects of outsourcing strategy on procurement performance of some selected Te...

  8. Formative evaluation of a telemedicine model for delivering clinical neurophysiology services part I: Utility, technical performance and service provider perspective

    Directory of Open Access Journals (Sweden)

    Breen Patricia

    2010-09-01

    Full Text Available Abstract Background Formative evaluation is conducted in the early stages of system implementation to assess how it works in practice and to identify opportunities for improving technical and process performance. A formative evaluation of a teleneurophysiology service was conducted to examine its technical and sociological dimensions. Methods A teleneurophysiology service providing routine EEG investigation was established. Service use, technical performance and satisfaction of clinical neurophysiology personnel were assessed qualitatively and quantitatively. These were contrasted with a previously reported analysis of the need for teleneurophysiology, and examination of expectation and satisfaction with clinical neurophysiology services in Ireland. A preliminary cost-benefit analysis was also conducted. Results Over the course of 40 clinical sessions during 20 weeks, 142 EEG investigations were recorded and stored on a file server at a satellite centre which was 130 miles away from the host clinical neurophysiology department. Using a virtual private network, the EEGs were accessed by a consultant neurophysiologist at the host centre for interpretation. The model resulted in a 5-fold increase in access to EEG services as well as reducing average waiting times for investigation by a half. Technically the model worked well, although a temporary loss of virtual private network connectivity highlighted the need for clarity in terms of responsibility for troubleshooting and repair of equipment problems. Referral quality, communication between host and satellite centres, quality of EEG recordings, and ease of EEG review and reporting indicated that appropriate organisational processes were adopted by the service. Compared to traditional CN service delivery, the teleneurophysiology model resulted in a comparable unit cost per EEG. Conclusion Observations suggest that when traditional organisational boundaries are crossed challenges associated with the

  9. Performance evaluation of the technical capabilities of DOE sites for disposal of mixed low-level waste: Volume 3, Site evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Waters, R.D.; Gruebel, M.M. [eds.

    1996-03-01

    A team of analysts designed and conducted a performance evaluation to estimate the technical capabilities of fifteen Department of Energy sites for disposal of mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Volume 1 summarizes the process for selecting the fifteen sites, the methodology used in the evaluation, and the conclusions derived from the evaluation. Volume 2 provides details about the site-selection process, the performance-evaluation methodology, and the overall results of the analysis. Volume 3 contains detailed evaluations of the fifteen sites and discussion of the results for each site.

  10. Multi-Criteria Evaluation of End-of-Life Vehicles’ Dismantling Scenarios with Respect to Technical Performance and Sustainability Issues

    Directory of Open Access Journals (Sweden)

    Alexis Schmid

    2016-12-01

    Full Text Available Three scenarios of dismantling and shredding operations of end-of-life vehicles (ELVs were compared in this study with respect to technical and sustainability criteria, according to the level of dismantling applied to the vehicles. The scenarios differed from each other in the extent of the dismantling operations. They were implemented experimentally at the industrial scale on representative samples of 120 vehicles. The data collected from the monitoring of the experimental campaigns were used as feed data for the multi-criteria analysis of the scenarios using the PROMETHEE method. Nine criteria of evaluation were selected, namely global warming, local environmental impacts, tropospheric ozone production, ecotoxicity, operational costs, investment costs, occupational risks, employability, and technical performance. The medium-level dismantling scenario was identified as the best scenario with respect to the criteria of evaluation. This scenario included the steps of depollution, followed by the removal of easily accessible and identifiable plastics and glasses. Reasonable changes in the ponderation of the evaluation criteria did not significantly affect the ranking.

  11. Performance of two different digital evaluation systems used for assessing pre-clinical dental students' prosthodontic technical skills.

    Science.gov (United States)

    Gratton, D G; Kwon, S R; Blanchette, D R; Aquilino, S A

    2017-11-01

    Proper integration of newly emerging digital assessment tools is a central issue in dental education in an effort to provide more accurate and objective feedback to students. The study examined how the outcomes of students' tooth preparation were correlated when evaluated using traditional faculty assessment and two types of digital assessment approaches. Specifically, incorporation of the Romexis Compare 2.0 (Compare) and Sirona prepCheck 1.1 (prepCheck) systems was evaluated. Additionally, satisfaction of students based on the type of software was evaluated through a survey. Students in a second-year pre-clinical prosthodontics course were allocated to either Compare (n = 42) or prepCheck (n = 37) systems. All students received conventional instruction and used their assigned digital system as an additional evaluation tool to aid in assessing their work. Examinations assessed crown preparations of the maxillary right central incisor (#8) and the mandibular left first molar (#19). All submissions were graded by faculty, Compare and prepCheck. Technical scores did not differ between student groups for any of the assessment approaches. Compare and prepCheck had modest, statistically significant correlations with faculty scores with a minimum correlation of 0.3944 (P = 0.0011) and strong, statistically significant correlations with each other with a minimum correlation of 0.8203 (P < 0.0001). A post-course student survey found that 55.26% of the students felt unfavourably about learning the digital evaluation protocols. A total of 62.31% felt favourably about the integration of these digital tools into the curriculum. Comparison of Compare and prepCheck showed no evidence of significant difference in students' prosthodontics technical performance and perception. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. Development of field performance evaluation tools and program for pavement marking materials : technical report

    Science.gov (United States)

    2011-03-01

    Historically the prequalification or selection of pavement marking materials (PMMs) is mainly based on : product specifications and lab testing, which do not correlate well with the field performance of the products. : On the other hand, there is no ...

  13. Technical Evaluation of Oak Ridge Filter Test Facility

    CERN Document Server

    Kriskovich, J R

    2002-01-01

    Two evaluations of the Oak Ridge Department of Energy (DOE) Filter Test Facility (FTF) were performed on December 11 and 12, 2001, and consisted of a quality assurance and a technical evaluation. This report documents results of the technical evaluation.

  14. Technical performance evaluation of the MyT4 point of care technology for CD4+ T cell enumeration.

    Directory of Open Access Journals (Sweden)

    Matilu Mwau

    Full Text Available Though absolute CD4+ T cell enumeration is the primary gateway to antiretroviral therapy initiation for HIV-positive patients in all developing countries, patient access to this critical diagnostic test is relatively poor. We technically evaluated the performance of a newly developed point-of-care CD4+ T cell technology, the MyT4, compared with conventional CD4+ T cell testing technologies.Over 250 HIV-positive patients were consecutively enrolled and their blood tested on the MyT4, BD FACSCalibur, and BD FACSCount.Compared with the BD FACSCount, the MyT4 had an r2 of 0.7269 and a mean bias of -23.37 cells/µl. Compared with the BD FACSCalibur, the MyT4 had an r2 of 0.5825 and a mean bias of -46.58 cells/µl. Kenya currently uses a CD4+ T cell test threshold of 350 cells/µl to determine patient eligibility for antiretroviral therapy. At this threshold, the MyT4 had a sensitivity of 95.3% (95% CI: 88.4-98.7% and a specificity of 87.9% (95% CI: 82.3-92.3% compared with the BD FACSCount and sensitivity and specificity of 88.2% (95% CI: 79.4-94.2% and 84.2% (95% CI: 78.2-89.2%, respectively, compared with the BD FACSCalibur. Finally, the MyT4 had a coefficient of variation of 12.80% compared with 14.03% for the BD FACSCalibur.We conclude that the MyT4 performed well at the current 350 cells/µl ART initiation eligibility threshold when used by lower cadres of health care facility staff in rural clinics compared to conventional CD4+ T cell technologies.

  15. Technical Evaluation Report

    National Research Council Canada - National Science Library

    Tipton, Michael J

    2005-01-01

    .... This evaluation provides a brief review of the papers presented at the meeting; the salient points of each paper are listed and the objectives (OBJ I-III) of the meeting they addressed noted. A few general comments are then made about the presentations and the meeting as a whole.

  16. Nuclear safety. Romania. Nuclear fuel performance, modeling and evaluation. Technical report. Report prepared for the Government of Romania

    International Nuclear Information System (INIS)

    Hsu, Tai-Ran

    1992-08-01

    The document contains the technical report submitted by an IAEA expert as a result of a field mission undertaken in June-July 1992 at the Institute for Nuclear Power Research, Pitesti, Romania, in the frame of the project IAEA/UNDP-Rom/87/002 (Nuclear Safety). The objectives of the mission were to assist the Institute in understanding the physical processes during fuel power cycling, to develop a computer code for power cycling behavior of fuel elements under both normal operation and power transient conditions, to advise on the design of irradiation tests aiming at the evaluation of fuel behavior during power cycling, and on the application of Computer-Aided Design (CAD) for fuel bundles

  17. Performance evaluation of the technical capabilities of DOE sites for disposal of mixed low-level waste. Volume 1: Executive summary

    International Nuclear Information System (INIS)

    1996-03-01

    A team of analysts designed and conducted a performance evaluation (PE) to estimate the technical capabilities of fifteen Department of Energy sites for disposal of mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Volume 1 summarizes the process for selecting the fifteen sites, the methodology used in the evaluation, and the conclusions derived from the evaluation. Volume 1 is an executive summary both of the PE methodology and of the results obtained from the PEs. While this volume briefly reviews the scope and method of analyses, its main objective is to emphasize the important insights and conclusions derived from the conduct of the PEs. Volume 2 provides details about the site-selection process, the performance-evaluation methodology, and the overall results of the analysis. Volume 3 contains detailed evaluations of the fifteen sites and discussions of the results for each site

  18. Applying Human-performance Models to Designing and Evaluating Nuclear Power Plants: Review Guidance and Technical Basis

    International Nuclear Information System (INIS)

    O'Hara, J.M.

    2009-01-01

    Human performance models (HPMs) are simulations of human behavior with which we can predict human performance. Designers use them to support their human factors engineering (HFE) programs for a wide range of complex systems, including commercial nuclear power plants. Applicants to U.S. Nuclear Regulatory Commission (NRC) can use HPMs for design certifications, operating licenses, and license amendments. In the context of nuclear-plant safety, it is important to assure that HPMs are verified and validated, and their usage is consistent with their intended purpose. Using HPMs improperly may generate misleading or incorrect information, entailing safety concerns. The objective of this research was to develop guidance to support the NRC staff's reviews of an applicant's use of HPMs in an HFE program. The guidance is divided into three topical areas: (1) HPM Verification, (2) HPM Validation, and (3) User Interface Verification. Following this guidance will help ensure the benefits of HPMs are achieved in a technically sound, defensible manner. During the course of developing this guidance, I identified several issues that could not be addressed; they also are discussed.

  19. Applying Human-performance Models to Designing and Evaluating Nuclear Power Plants: Review Guidance and Technical Basis

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.M.

    2009-11-30

    Human performance models (HPMs) are simulations of human behavior with which we can predict human performance. Designers use them to support their human factors engineering (HFE) programs for a wide range of complex systems, including commercial nuclear power plants. Applicants to U.S. Nuclear Regulatory Commission (NRC) can use HPMs for design certifications, operating licenses, and license amendments. In the context of nuclear-plant safety, it is important to assure that HPMs are verified and validated, and their usage is consistent with their intended purpose. Using HPMs improperly may generate misleading or incorrect information, entailing safety concerns. The objective of this research was to develop guidance to support the NRC staff's reviews of an applicant's use of HPMs in an HFE program. The guidance is divided into three topical areas: (1) HPM Verification, (2) HPM Validation, and (3) User Interface Verification. Following this guidance will help ensure the benefits of HPMs are achieved in a technically sound, defensible manner. During the course of developing this guidance, I identified several issues that could not be addressed; they also are discussed.

  20. Evaluation of the technical performance of three different commercial digital breast tomosynthesis systems in the clinical environment

    NARCIS (Netherlands)

    Rodriguez Ruiz, A.; Castillo, M.; Garayoa, J.; Chevalier, M.

    2016-01-01

    The aim of this work was to research and evaluate the performance of three different digital breast tomosynthesis (DBT) systems in the clinical environment (Siemens Mammomat Inspiration, Hologic Selenia Dimensions, and Fujifilm Amulet Innovality). The characterization included the study of the

  1. Construction and validation of a technical-tactical performance evaluation instrument in volleyball. DOI: 10.5007/1980-0037.2011v13n1p43

    Directory of Open Access Journals (Sweden)

    Carine Collet

    2011-12-01

    Full Text Available The aim of this study was to develop and validate a technical-tactical performance evaluation instrument in volleyball (PEI-VB. Observation indicators were constructed based on the literature and on already established evaluation models. Content validation was performed by 10 experts in the field for the dimensions of clarity of language, practical relevance and theoretical relevance. Intra-examiner (test-retest method and inter-examiner (6 examiners reliability was tested. Data collection consisted of the analysis of a video of games from the finalist team of the 2009 Catarinense Children’s Volleyball Championship. Data were analyzed using the SPSS for Windows 11.5 and SAS programs, with the level of significance set at 5%. Spearman’s correlation coefficient, weighted kappa index of agreement, and intraclass correlation coefficient were used for the analysis of each specific action of the game and each performance component. The PEI-VB comprises an instrument that evaluates the components of technical-tactical performance of the actions of a 6x6 volleyball game, permitting the identification of the general performance level of each player, as well as the specific performance according to action and component. In addition, the validity of the instrument was 92.9% and the intra- and inter-examiner reliability was 0.84 and 0.78, respectively. All indices were high, indicating that the PEI-VB is a valid and consistent instrument that permits the evaluation of the level of sports performance of volleyball players of different categories.

  2. Construction and validation of a technical-tactical performance evaluation instrument in volleyball. DOI: 10.5007/1980-0037.2011v13n1p43

    Directory of Open Access Journals (Sweden)

    Joice Mara Facco Stefanello

    2011-01-01

    Full Text Available The aim of this study was to develop and validate a technical-tactical performance evaluation instrument in volleyball (PEI-VB. Observation indicators were constructed based on the literature and on already established evaluation models. Content validation was performed by 10 experts in the field for the dimensions of clarity of language, practical relevance and theoretical relevance. Intra-examiner (test-retest method and inter-examiner (6 examiners reliability was tested. Data collection consisted of the analysis of a video of games from the finalist team of the 2009 Catarinense Children’s Volleyball Championship. Data were analyzed using the SPSS for Windows 11.5 and SAS programs, with the level of significance set at 5%. Spearman’s correlation coefficient, weighted kappa index of agreement, and intraclass correlation coefficient were used for the analysis of each specific action of the game and each performance component. The PEI-VB comprises an instrument that evaluates the components of technical-tactical performance of the actions of a 6x6 volleyball game, permitting the identification of the general performance level of each player, as well as the specific performance according to action and component. In addition, the validity of the instrument was 92.9% and the intra- and inter-examiner reliability was 0.84 and 0.78, respectively. All indices were high, indicating that the PEI-VB is a valid and consistent instrument that permits the evaluation of the level of sports performance of volleyball players of different categories.

  3. Technical manual for calculating cooling pond performance

    International Nuclear Information System (INIS)

    Krstulovich, S.F.

    1988-01-01

    This manual is produced in response to a growing number of requests for a technical aid to explain methods for simulating cooling pond performance. As such, it is a compilation of reports, charts and graphs developed through the years for use in analyzing situations. Section II contains a report summarizing the factors affecting cooling pond performance and lists statistical parameters used in developing performance simulations. Section III contains the graphs of simulated cooling pond performance on an hourly basis for various combinations of criteria (wind, solar, depth, air temperature and humidity) developed from the report in Section II. Section IV contains correspondence describing how to develop further data from the graphs in Section III, as well as mathematical models for the system of performance calculation. Section V contains the formulas used to simulate cooling pond performances in a cascade arrangement, such as the Fermilab Main Ring ponds. Section VI contains the calculations currently in use to evaluate the Main Ring pond performance based on current flows and Watts loadings. Section VII contains the overall site drawing of the Main Ring cooling ponds with thermal analysis and physical data

  4. Head-camera video recordings of trauma core competency procedures can evaluate surgical resident's technical performance as well as colocated evaluators.

    Science.gov (United States)

    Mackenzie, Colin F; Pasley, Jason; Garofalo, Evan; Shackelford, Stacy; Chen, Hegang; Longinaker, Nyaradzo; Granite, Guinevere; Pugh, Kristy; Hagegeorge, George; Tisherman, Samuel A

    2017-07-01

    Unbiased evaluation of trauma core competency procedures is necessary to determine if residency and predeployment training courses are useful. We tested whether a previously validated individual procedure score (IPS) for individual procedure vascular exposure and fasciotomy (FAS) performance skills could discriminate training status by comparing IPS of evaluators colocated with surgeons to blind video evaluations. Performance of axillary artery (AA), brachial artery (BA), and femoral artery (FA) vascular exposures and lower extremity FAS on fresh cadavers by 40 PGY-2 to PGY-6 residents was video-recorded from head-mounted cameras. Two colocated trained evaluators assessed IPS before and after training. One surgeon in each pretraining tertile of IPS for each procedure was randomly identified for blind video review. The same 12 surgeons were video-recorded repeating the procedures less than 4 weeks after training. Five evaluators independently reviewed all 96 randomly arranged deidentified videos. Inter-rater reliability/consistency, intraclass correlation coefficients were compared by colocated versus video review of IPS, and errors. Study methodology and bias were judged by Medical Education Research Study Quality Instrument and the Quality Assessment of Diagnostic Accuracy Studies criteria. There were no differences (p ≥ 0.5) in IPS for AA, FA, FAS, whether evaluators were colocated or reviewed video recordings. Evaluator consistency was 0.29 (BA) - 0.77 (FA). Video and colocated evaluators were in total agreement (p = 1.0) for error recognition. Intraclass correlation coefficient was 0.73 to 0.92, dependent on procedure. Correlations video versus colocated evaluations were 0.5 to 0.9. Except for BA, blinded video evaluators discriminated (p Education Research Study Quality Instrument criteria scored 15.5/19, Quality Assessment of Diagnostic Accuracy Studies 2 showed low bias risk. Video evaluations of AA, FA, and FAS procedures with IPS are unbiased, valid, and

  5. Branch technical position for performance assessment of low-level radioactive waste disposal facilities

    International Nuclear Information System (INIS)

    Campbell, A.C.; Abramson, L.; Byrne, R.M.

    1994-01-01

    The U.S. Nuclear Regulatory Commission has developed a Draft Branch Technical Position on Performance Assessment of Low-Level Radioactive Waste Disposal Facilities. The draft technical position addresses important issues in performance assessment modeling and provides a framework and technical basis for conducting and evaluating performance assessments in a disposal facility license application. The technical position also addresses specific technical policy issues and augments existing NRC guidance pertaining to LLW performance assessment

  6. Technical Performance and Economic Evaluation of Evaporative and Membrane-Based Concentration for Biomass-Derived Sugars

    International Nuclear Information System (INIS)

    Sievers, David A.; Stickel, Jonathan J.; Grundl, Nicholas J.; Tao, Ling

    2017-01-01

    Several conversion pathways of lignocellulosic biomass to advanced biofuels require or benefit from using concentrated sugar syrups of 600 g/L or greater. And while concentration may seem straightforward, thermal sugar degradation and energy efficiency remain major concerns. This study evaluated the trade-offs in product recovery, energy consumption, and economics between evaporative and membrane-based concentration methods. The degradation kinetics of xylose and glucose were characterized and applied to an evaporator process simulation. Though significant sugar loss was predicted for certain scenarios due to the Maillard reaction, industrially common falling-film plate evaporators offer short residence times (<5 min) and are expected to limit sugar losses. Membrane concentration experiments characterized flux and sugar rejection, but diminished flux occurred at >100 g/L. A second step using evaporation is necessary to achieve target concentrations. Techno-economic process model simulations evaluated the overall economics of concentrating a 35 g/L sugar stream to 600 g/L in a full-scale biorefinery. A two-step approach of preconcentrating using membranes and finishing with an evaporator consumed less energy than evaporation alone but was more expensive because of high capital expenses of the membrane units.

  7. [Iatrogenic biliary ducts lesions after laparoscopic cholecystectomy: a medical technical error or a therapeutic failure in a routinely performed procedure. A medico-legal evaluation of selected cases].

    Science.gov (United States)

    Chowaniec, Czesław; Chowaniec, Małgorzata; Kobek, Mariusz; Nowak, Agnieszka

    2007-01-01

    Laparoscopic cholecystectomy due to cholelithiasis is associated with a higher risk of intraoperative lesions of biliary duct in comparison to classic surgery. Technical difficulties, a limited access to operating area, the presence of cholecystic adhesions and inflammatory lesions, as well as possible anomalies or anatomical variations of the extrahepatic biliary ducts pose the risk of damaging the biliary tract. At times, laparoscopic procedures are performed by surgeons with insufficient operator skills and qualifications. The medico-legal evaluation of intraoperative damage to the biliary tract with resulting complications--the so-called "biliary damage"--is very difficult. The presented analysis included six cases of intraoperative biliary ducts lesions evaluated by the Forensic Medicine Department, Medical University, Katowice. Three instances were associated with investigations carried out by public prosecutors in medical error cases, and in three others, civil cases were brought in the court, with the plaintiffs advancing a claim. While defining the scope of the management--both diagnostic, therapeutic and decision-making--in the pre-, intra- and postoperative period, attention was drawn to the prescriptive character of patient management in such cases, including indications for laparoscopic surgery, an increased potential therapeutic risk that also included a possibility of the patient developing "normal, typical" complications, referring the above factors to the scope and limits of the physician's professional and criminal liability and analyzing them to assess whether a medical error had been committed, or else the events had represented a therapeutic failure within the limits of the accepted therapeutic risk. A separate problem emphasized by the authors focused on difficulties in objective evaluation of health-associated consequences that might be defined in a tabular manner as long-term or permanent detriment to health.

  8. Technical evaluation of seismic qualification of safety-related equipment

    International Nuclear Information System (INIS)

    Cho, Yang Hui; Park, Heong Gee; Park, Yeong Seok

    1994-04-01

    This study is purposed to evaluate the technical acceptability of the procedures and techniques of seismic qualifications which were performed for the YGN 3 and 4 safety-related equipment.This study is also targeted to suggest a systematized technical procedure guide for the effective performance and review of the seismic qualification, which reflects the most up-to-date licensing requirements and state-of the-art

  9. Twenty-fifth water reactor safety information meeting: Proceedings. Volume 2: Human reliability analysis and human performance evaluation; Technical issues related to rulemakings; Risk-informed, performance-based initiatives; High burn-up fuel research

    International Nuclear Information System (INIS)

    Monteleone, S.

    1998-03-01

    This three-volume report contains papers presented at the conference. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. Foreign participation in the meeting included papers presented by researchers from France, Japan, Norway, and Russia. The titles of the papers and the names of the authors have been updated and may differ from those that appeared in the final program of the meeting. This volume contains the following: (1) human reliability analysis and human performance evaluation; (2) technical issues related to rulemakings; (3) risk-informed, performance-based initiatives; and (4) high burn-up fuel research

  10. TurboTech Technical Evaluation Automated System

    Science.gov (United States)

    Tiffany, Dorothy J.

    2009-01-01

    TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

  11. Procedures for evaluating technical specifications (PETS)

    International Nuclear Information System (INIS)

    Samanta, P.K.; Boccio, J.L.; Vesely, W.E.

    1987-01-01

    In this paper, aspects of technical specifications relating to Generic Issues B-56 and B-61 are discussed from a risk-standpoint. These primarily deal with the risk issues associated with (1) adaptive diesel test requirements/surveillance test intervals, and (2) the effectiveness of cumulative outage time requirements for controlling downtime risk. Risk and reliability approaches are presented which (1) allow risk-acceptable test intervals to be determined for any diesel and (2) show the potential risk-control capability of prescribed allowed cumulative outage times. This work was conducted through NRC's Procedures for Evaluating Technical Specifications (PETS) Program. The overall objective of this program is to develop and demonstrate methodologies that utilize risk insights and reliability techniques for evaluating the scope, detailed requirements, and safety impact of plant technical specifications

  12. IASI instrument: technical description and measured performances

    Science.gov (United States)

    Hébert, Ph.; Blumstein, D.; Buil, C.; Carlier, T.; Chalon, G.; Astruc, P.; Clauss, A.; Siméoni, D.; Tournier, B.

    2017-11-01

    IASI is an infrared atmospheric sounder. It will provide meteorologist and scientific community with atmospheric spectra. The IASI system includes 3 instruments that will be mounted on the Metop satellite series, a data processing software integrated in the EPS (EUMETSAT Polar System) ground segment and a technical expertise centre implemented in CNES Toulouse. The instrument is composed of a Fourier transform spectrometer and an associated infrared imager. The optical configuration is based on a Michelson interferometer and the interferograms are processed by an on-board digital processing subsystem, which performs the inverse Fourier transforms and the radiometric calibration. The infrared imager co-registers the IASI soundings with AVHRR imager (AVHRR is another instrument on the Metop satellite). The presentation will focus on the architectures of the instrument, the description of the implemented technologies and the measured performance of the first flight model. CNES is leading the IASI program in association with EUMETSAT. The instrument Prime is ALCATEL SPACE.

  13. [Evaluation of technical skills in surgical training].

    Science.gov (United States)

    Kasparian, Andres C; Martinez, A C; JoverClos, R J; Chércoles, R A

    2014-01-01

    technical skills acquisition is considered to be of paramount importance in surgical training. Yet, formal assessment of technical skills is the weakest and less developed area. Currently available resources to evaluate technical skills are largely subjective, and lack of validity and reliability. Direct observation, one of the most frequently used methods, is largely biased by interpersonal subjectivity and personality traits. We propose the creation and use of a new procedure-specific tool for objective assessment of technical skills in surgery to evaluate validity and reliability. laparoscopic cholecystectomy and Lichstenstein's inguinal hernia repair were the chosen procedures. Three groups of comparison were defined according to surgical expertise: initial, intermediate, and experts. Surgeries were videorecorded in real time without identification of the patient or the surgeon. Tapes without any posterior edition were assigned to two expert surgeons in a blind and randomized sequence. A newly proposed procedure-specific rating scale was used for evaluation, as well as Reznick's OSATS global scale. Kruskal-Wallis non-parametric test was used to assess validity. p 0.8 granted reliability. from April 2010 to December 2012 36 laparoscopic cholecystectomies and 31 inguinal hernia repairs were recorded. Significant difference was found among groups of comparison for every item (ptechnical skills in surgery is feasible and useful. The tool we proposed showed construct validity and reliability. Video recording of surgical procedures grants durability over time to an ephemeral phenomenon. The objectivity is based on the explicit statements and quantification of every step to be evaluated, and the blind randomization and anonymous treatment of the sample. Sharing the same quality criteria between evaluators is of paramount importance to reach satisfactory results. The process of evaluation always implies a shortened view of the reality.

  14. Questioning the Technical Quality of Performance Assessment.

    Science.gov (United States)

    Baker, Eva L.

    1993-01-01

    Ongoing research finds that alternatives to formal tests carry hidden costs and require trade-offs. National Center for Research on Evaluation, Standards, and Student Testing (CRESST) is studying how performance assessments work so that they may be designed to help students reach their highest potential. This article raises priority questions,…

  15. Sludge Treatment Evaluation: 1992 Technical progress

    International Nuclear Information System (INIS)

    Silva, L.J.; Felmy, A.R.; Ding, E.R.

    1993-01-01

    This report documents Fiscal Year 1992 technical progress on the Sludge Treatment Evaluation Task, which is being conducted by Pacific Northwest Laboratory. The objective of this task is to develop a capability to predict the performance of pretreatment processes for mixed radioactive and hazardous waste stored at Hanford and other US Department of Energy (DOE) sites. Significant cost savings can be achieved if radionuclides and other undesirable constituents can be effectively separated from the bulk waste prior to final treatment and disposal. This work is initially focused on chemical equilibrium prediction of water washing and acid or base dissolution of Hanford single-shell tank (SST) sludges, but may also be applied to other steps in pretreatment processes or to other wastes. Although SST wastes contain many chemical species, there are relatively few constituents -- Na, Al, NO 3 , NO 2 , PO 4 , SO 4 , and F -- contained in the majority of the waste. These constituents comprise 86% and 74% of samples from B-110 and U-110 SSTS, respectively. The major radionuclides of interest (Cs, Sr, Tc, U) are present in the sludge in small molal quantities. For these constituents, and other important components that are present in small molal quantities, the specific ion-interaction terms used in the Pitzer or NRTL equations may be assumed to be zero for a first approximation. Model development can also be accelerated by considering only the acid or base conditions that apply for the key pretreatment steps. This significantly reduces the number of chemical species and chemical reactions that need to be considered. Therefore, significant progress can be made by developing all the specific ion interactions for a base model and an acid dissolution model

  16. Technical errors in intraoral radiographs performed by undergraduate students

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Laureano da Rosa

    Full Text Available Objectives: To evaluate the technical errors in periapical examinations performed by dental students. Methods: Patient record charts at the dental clinic of the dentistry course were analyzed. Of these, the charts that presented at least ten periapical intraoral radiographs were used in the study, therefore a total of 219 patient record charts were selected, totaling 2 821 radiographs. The radiographs were analyzed one by one, using an uniform light negatoscope, in a darkened room, by a professional radiologist, taking into consideration the following evaluation criteria: technically good and unsatisfactory radiographs. The technical errorswere classified as errors in radiographic technique and radiographic processing errors. The data on quality critera stipulated and obtainedin the evaluation were tabulated, intervals of confidence were used to infer the percentage that were suitable and unsuitable in the studied period, and were statistically analyzed using the chi-square test, at the level of significance of 5%. Results: The results were: of the 2 821 radiographs analyzed, only 1 425 (50.51% were technically good. of the 1 396 (49.49% considered inadequat, 1 155 (82.74% presented errors in radiographic technique, while 241 (17.26% presented radiographic processing errors. The most frequently repeated error was image overlapping (32.88%, followed by the underexposure (25.43%, cut of the tooth (9.31%, chemicalcontamination problems (4.51%, cone cut (3.15%, other errors in radiographic technique (1.86% and other radiographic processing errors (1.43%. Conclusion: The conclusion was that steps must be taken to improve the quality of radiographs obtained because, although they did not make it impossible to interpret the radiographs, this was made extremely difficult, and the depreciated the value of the achives of past clinical situations and cases.

  17. Prognostics Performance Evaluation

    Data.gov (United States)

    National Aeronautics and Space Administration — This is the first version of the performance evaluation tool. Evaluation is based on point estimates of the RUL predictions. a more detailed documentation will be...

  18. Technical Evaluation Report 10: Evaluating Vendor Supplied Information

    Directory of Open Access Journals (Sweden)

    Patrick J. Fahy

    2002-04-01

    Full Text Available Distance educators are not normally equipped by their training or experience for the complex task of evaluating technologies. One of the areas of potential disadvantage is in interpreting information provided by vendors themselves, and in relating effectively with sales, marketing and technical representatives. An objective and thorough product evaluation requires that information be selected, and sometimes generated, to aid the process. Vendors may agree to provide additional information, including direct experience with their products, if evaluators know what to ask for and what to expect from vendors.

  19. Pareto analysis of critical factors affecting technical institution evaluation

    Directory of Open Access Journals (Sweden)

    Victor Gambhir

    2012-08-01

    Full Text Available With the change of education policy in 1991, more and more technical institutions are being set up in India. Some of these institutions provide quality education, but others are merely concentrating on quantity. These stakeholders are in a state of confusion about decision to select the best institute for their higher educational studies. Although various agencies including print media provide ranking of these institutions every year, but their results are controversial and biased. In this paper, the authors have made an endeavor to find the critical factors for technical institution evaluation from literature survey. A Pareto analysis has also been performed to find the intensity of these critical factors in evaluation. This will not only help the stake holders in taking right decisions but will also help the management of institutions in benchmarking for identifying the most important critical areas to improve the existing system. This will in turn help Indian economy.

  20. Technical evaluation: pressurized fluidized-bed combustion technology

    Energy Technology Data Exchange (ETDEWEB)

    Miller, S A; Vogel, G J; Gehl, S M; Hanway, Jr, J E; Henry, R F; Parker, K M; Smyk, E B; Swift, W M; Podolski, W F

    1982-04-01

    The technology of pressurized fluidized-bed combustion, particularly in its application to a coal-burning combined-cycle plant, is evaluated by examining the technical status of advanced-concept plant components - boiler system (combustor, air-handling and air-injection equipment, and heat exchangers); solids handling, injection, and ejection system; hot-gas cleanup equipment; instrumentation/control system; and the gas turbine - along with materials of plant construction. Environmental performance as well as energy efficiency are examined, and economic considerations are reviewed briefly. The evaluation concludes with a broad survey of the principal related research and development programs in the United States and other countries, a foreview of the most likely technological developments, and a summary of unresolved technical issues and problems.

  1. Model to evaluate the technical efficiency of university units

    Directory of Open Access Journals (Sweden)

    Marlon Soliman

    2014-06-01

    Full Text Available In higher education institutions, the technical efficiency has been measured by several indicators that, when used separately, does not lead to an effective conclusion about the administrative reality of these. Therefore, this paper proposes a model to evaluate the technical efficiency of university units of a higher education institution (HEI from the perspectives of Teaching, Research and Extension. The conception of the model was performed according to the pressumptions of Data Envelopment Analysis (DEA, CCR model – product oriented, from the identification of relevant variables for the addressed context. The model was applied to evaluate the efficiency of nine academic units of the Federal University of Santa Maria (UFSM, obtaining as a result the efficiency of each unit as well as recommendations for the units considered inefficient. At the end of this study, it was verified that it is possible to measure the efficiency of various units and consequently establish goals for improvement based on the methodology used.

  2. Vocational and Technical Education Performance Standards and Competencies.

    Science.gov (United States)

    Connecticut State Board of Education, Hartford.

    These Connecticut vocational and technical performance standards and competencies are a guide for overall quality attainment in these seven vocational and technical program areas: agricultural science technology education; business and finance technology education; cooperative work education; family and consumer sciences education; marketing…

  3. A protocol for evaluating progressive levels of simulation fidelity in the development of technical skills, integrated performance and woman centred clinical assessment skills in undergraduate midwifery students

    Science.gov (United States)

    2013-01-01

    Background Simulation as a pedagogical approach has been used in health professional education to address the need to safely develop effective clinical skills prior to undertaking clinical practice. However, evidence for the use of simulation in midwifery is largely anecdotal, and research evaluating the effectiveness of different levels of simulation fidelity are lacking. Woman centred care is a core premise of the midwifery profession and describes the behaviours of an individual midwife who demonstrates safe and effective care of the individual woman. Woman centred care occurs when the midwife modifies the care to ensure the needs of each individual woman are respected and addressed. However, a review of the literature demonstrates an absence of a valid and reliable tool to measure the development of woman centred care behaviours. This study aims to determine which level of fidelity in simulated learning experiences provides the most effective learning outcomes in the development of woman centred clinical assessment behaviors and skills in student midwives. Methods/Design Three-arm, randomised, intervention trial. In this research we plan to: a) trial three levels of simulation fidelity - low, medium and progressive, on student midwives performing the procedure of vaginal examination; b) measure clinical assessment skills using the Global Rating Scale (GRS) and Integrated Procedural Performance Instrument (IPPI); and c) pilot the newly developed Woman Centred Care Scale (WCCS) to measure clinical behaviors related to Woman-Centredness. Discussion This project aims to enhance knowledge in relation to the appropriate levels of fidelity in simulation that yield the best educational outcomes for the development of woman centred clinical assessment in student midwives. The outcomes of this project may contribute to improved woman centred clinical assessment for student midwives, and more broadly influence decision making regarding education resource allocation for

  4. Evaluation Study of VTAE Wood Technics Programs.

    Science.gov (United States)

    Wisconsin State Board of Vocational, Technical, and Adult Education, Madison.

    A survey of former students of the Wisconsin Vocational, Technical, and Adult Education (VTAE) wood technics programs and employers in woodworking industries was conducted during spring of 1985. General objectives were to determine job classifications, types of businesses, and relative importance of tasks or duties in various woodworking-related…

  5. Virtual Campus Hub technical evaluation report

    DEFF Research Database (Denmark)

    Vercoulen, Frank; Badger, Merete; Monaco, Lucio

    This report describes and discusses the technical achievements of the Virtual Campus Hub project and formulates a brief agenda for the future.......This report describes and discusses the technical achievements of the Virtual Campus Hub project and formulates a brief agenda for the future....

  6. Corrective measures evaluation report for technical area-v groundwater.

    Energy Technology Data Exchange (ETDEWEB)

    Witt, Johnathan L (North Wind, Inc., Idaho Falls, ID); Orr, Brennon R. (North Wind, Inc., Idaho Falls, ID); Dettmers, Dana L. (North Wind, Inc., Idaho Falls, ID); Hall, Kevin A. (North Wind, Inc., Idaho Falls, ID); Howard, Hope (North Wind, Inc., Idaho Falls, ID)

    2005-07-01

    This Corrective Measures Evaluation Report was prepared as directed by the Compliance Order on Consent issued by the New Mexico Environment Department to document the process of selecting the preferred remedial alternative for contaminated groundwater at Technical Area V. Supporting information includes background information about the site conditions and potential receptors and an overview of work performed during the Corrective Measures Evaluation. Evaluation of remedial alternatives included identification and description of four remedial alternatives, an overview of the evaluation criteria and approach, qualitative and quantitative evaluation of remedial alternatives, and selection of the preferred remedial alternative. As a result of the Corrective Measures Evaluation, it was determined that monitored natural attenuation of all contaminants of concern (trichloroethene, tetrachloroethene, and nitrate) was the preferred remedial alternative for implementation as the corrective measure to remediate contaminated groundwater at Technical Area V of Sandia National Laboratories/New Mexico. Finally, design criteria to meet cleanup goals and objectives and the corrective measures implementation schedule for the preferred remedial alternative are presented.

  7. Performance improvement plan in customer technical services

    International Nuclear Information System (INIS)

    Lachambre, L.

    1995-01-01

    This presentation centred around the philosophy, goals, and initiatives associated with Gaz Metropolitain's performance improvement plan. Various aspects of the plan including customer surveys, new customer service policies, the creation of small working units, the decentralization of the Montreal service department, and customer-harmonized shift schedules were explored. Implementation of new service plans and contracts, the formation of improvement groups related to human resources, human resource and productivity management, leadership training, and the use of performance indicators were also explained

  8. An Empirical Evaluation of Technical Drawing Didactic in Virtual Worlds

    Directory of Open Access Journals (Sweden)

    Rita Francese

    2011-09-01

    Full Text Available This work proposes a 3D Virtual World environment and a didactic experience for training young students in an environment capable of supporting the engineering practices based on technical drawing. The main difficulty of technical drawing consists in representing a 3D object on a 2D medium. This restriction imposes to human mind to be able to summarize the spatial properties of objects on the paper. The proposed system trains these capabilities by requiring students to build, in the simulated environment, simple objects represented with 2D drawings. In this way, the students are not only pushed to move themselves between different dimensionality spaces, but also they benefit of the 3D spaces for moving and exploring the models they are building. An empirical evaluation, conducted as a controlled experiment, has provided enthusiastic results in terms of user performances and impressions.

  9. Technical Basis for Assessing Uranium Bioremediation Performance

    International Nuclear Information System (INIS)

    PE Long; SB Yabusaki; PD Meyer; CJ Murray; AL N'Guessan

    2008-01-01

    In situ bioremediation of uranium holds significant promise for effective stabilization of U(VI) from groundwater at reduced cost compared to conventional pump and treat. This promise is unlikely to be realized unless researchers and practitioners successfully predict and demonstrate the long-term effectiveness of uranium bioremediation protocols. Field research to date has focused on both proof of principle and a mechanistic level of understanding. Current practice typically involves an engineering approach using proprietary amendments that focuses mainly on monitoring U(VI) concentration for a limited time period. Given the complexity of uranium biogeochemistry and uranium secondary minerals, and the lack of documented case studies, a systematic monitoring approach using multiple performance indicators is needed. This document provides an overview of uranium bioremediation, summarizes design considerations, and identifies and prioritizes field performance indicators for the application of uranium bioremediation. The performance indicators provided as part of this document are based on current biogeochemical understanding of uranium and will enable practitioners to monitor the performance of their system and make a strong case to clients, regulators, and the public that the future performance of the system can be assured and changes in performance addressed as needed. The performance indicators established by this document and the information gained by using these indicators do add to the cost of uranium bioremediation. However, they are vital to the long-term success of the application of uranium bioremediation and provide a significant assurance that regulatory goals will be met. The document also emphasizes the need for systematic development of key information from bench scale tests and pilot scales tests prior to full-scale implementation

  10. Technical Basis for Assessing Uranium Bioremediation Performance

    Energy Technology Data Exchange (ETDEWEB)

    PE Long; SB Yabusaki; PD Meyer; CJ Murray; AL N’Guessan

    2008-04-01

    In situ bioremediation of uranium holds significant promise for effective stabilization of U(VI) from groundwater at reduced cost compared to conventional pump and treat. This promise is unlikely to be realized unless researchers and practitioners successfully predict and demonstrate the long-term effectiveness of uranium bioremediation protocols. Field research to date has focused on both proof of principle and a mechanistic level of understanding. Current practice typically involves an engineering approach using proprietary amendments that focuses mainly on monitoring U(VI) concentration for a limited time period. Given the complexity of uranium biogeochemistry and uranium secondary minerals, and the lack of documented case studies, a systematic monitoring approach using multiple performance indicators is needed. This document provides an overview of uranium bioremediation, summarizes design considerations, and identifies and prioritizes field performance indicators for the application of uranium bioremediation. The performance indicators provided as part of this document are based on current biogeochemical understanding of uranium and will enable practitioners to monitor the performance of their system and make a strong case to clients, regulators, and the public that the future performance of the system can be assured and changes in performance addressed as needed. The performance indicators established by this document and the information gained by using these indicators do add to the cost of uranium bioremediation. However, they are vital to the long-term success of the application of uranium bioremediation and provide a significant assurance that regulatory goals will be met. The document also emphasizes the need for systematic development of key information from bench scale tests and pilot scales tests prior to full-scale implementation.

  11. Technical indicators of financial performance in the dairy herd

    DEFF Research Database (Denmark)

    Kristensen, Erling Lundager; Østergaard, Søren; Krogh, Mogens Agerbo

    2008-01-01

    Monte Carlo simulation was used to predict the long-term financial performance related to the technical performance of dairy herds. The indicators addressed were derived from data collected routinely in the herd. They indicated technical performance that can be affected by the farmer or the consu......Monte Carlo simulation was used to predict the long-term financial performance related to the technical performance of dairy herds. The indicators addressed were derived from data collected routinely in the herd. They indicated technical performance that can be affected by the farmer...... or the consultant, and they were derived from expected cause-effect relations between technical performance and financial performance at the herd level. The study included the indicators shape of lactation curve, reproduction efficiency, heifer management, variation between cows in lactation curve persistency......, mortality in cows and calves, dynamics of body condition, and somatic cell counts. Each indicator was defined by 2 or 3 levels, and 2- and 3-factor interactions were included in the simulation experiment, which included 72 scenarios. Each scenario was replicated 200 times, and the resulting gross margin per...

  12. Guidelines for the technical evaluation of replacement items in nuclear power plants (NCIG-11)

    International Nuclear Information System (INIS)

    Craig, W.E.; Fakhar, A.A.; Shulman, M.N.

    1989-12-01

    This document presents guidelines and supporting information for the technical evaluation of replacement items in nuclear power plants. These guidelines contain six major sections which provide the practical knowledge and a programmatic approach to determine the technical and quality requirements necessary to generate purchase documents to procure the proper replacement items. The technical evaluation methodology includes the following steps. (1) Identification of the need for a technical evaluation. (2) Component/part functional classification procedures. (3) Performance of a Failure Modes and Effects Analysis. (4) Selection of Critical Characteristics for Design Determination. (5) Performance of a ''Like-For-Like'' or ''Alternate'' item Evaluation. (6) Preparation of the Technical and Quality Requirements Specification. Work on this document was initiated in response to the increased emphasis by the utilities owning nuclear power plants and nuclear industry on procurement of replacement items for use in safety related applications at nuclear power plants. 20 refs., 9 figs., 14 tabs

  13. Human Performance Evaluation System

    International Nuclear Information System (INIS)

    Hardwick, R.J. Jr.

    1985-01-01

    Operating nuclear power plants requires high standards of performance, extensive training and responsive management. Despite our best efforts inappropriate human actions do occur, but they can be managed. An extensive review of License Event Reports (LERs) was conducted which indicated continual inadequacy in human performance and in evaluation of root causes. Of some 31,000 LERs, about 5,000 or 16% were directly attributable to inappropriate actions. A recent analysis of 87 Significant Event Reports (issued by INPO in 1983) identified inappropriate actions as being the most frequent root cause (44% of the total). A more recent analysis of SERs issued in 1983 and 1984 indicate that 52% of the root causes were attributed to human performance. The Human Performance Evaluation System (HPES) is a comprehensive, coordinated utility/industry system for evaluating and reporting human performance situtations. HPES is a result of the realization that current reporting system provide limited treatment of human performance and rarely provide adequate information about root causes of inappropriate actions by individuals. The HPES was implemented to identify and eliminate root causes of inappropriate actions

  14. Evacuation performance evaluation tool.

    Science.gov (United States)

    Farra, Sharon; Miller, Elaine T; Gneuhs, Matthew; Timm, Nathan; Li, Gengxin; Simon, Ashley; Brady, Whittney

    2016-01-01

    Hospitals conduct evacuation exercises to improve performance during emergency events. An essential aspect in this process is the creation of reliable and valid evaluation tools. The objective of this article is to describe the development and implications of a disaster evacuation performance tool that measures one portion of the very complex process of evacuation. Through the application of the Delphi technique and DeVellis's framework, disaster and neonatal experts provided input in developing this performance evaluation tool. Following development, content validity and reliability of this tool were assessed. Large pediatric hospital and medical center in the Midwest. The tool was pilot tested with an administrative, medical, and nursing leadership group and then implemented with a group of 68 healthcare workers during a disaster exercise of a neonatal intensive care unit (NICU). The tool has demonstrated high content validity with a scale validity index of 0.979 and inter-rater reliability G coefficient (0.984, 95% CI: 0.948-0.9952). The Delphi process based on the conceptual framework of DeVellis yielded a psychometrically sound evacuation performance evaluation tool for a NICU.

  15. Performance evaluation of biosimulator for treating domestic ...

    African Journals Online (AJOL)

    MICHAEL

    Pakistan. ABSTRACT: This research investigation was aimed at demonstrating the performance evaluation of pilot .... steel filter. The sample thus treated in the biosimulator with the preset DO concentration (Table. 1). Table 1. Technical Data of biosimulator. General details. 1. ..... in the sequencing batch biological reactor.

  16. Technical trading rule performance in the second-hand asset markets in bulk shipping

    OpenAIRE

    Ådland, Roar Os

    2000-01-01

    This paper investigates the performance of technical trading rules applied to asset play in the international bulk shipping industry. The rules are tested on monthly returns in the Products Carrier segment for the period 1981 to 1998. The paper evaluates 1053 different parameterizations of three of the simplest and most popular trading rules in the financial markets: filter rules, moving averages, and support and resistance levels. Overall, the results provide strong support for the technical...

  17. Technical performance of percutaneous and laminectomy leads analyzed by modeling

    NARCIS (Netherlands)

    Manola, L.; Holsheimer, J.

    2004-01-01

    The objective of this study was to compare the technical performance of laminectomy and percutaneous spinal cord stimulation leads with similar contact spacing by computer modeling. Monopolar and tripolar (guarded cathode) stimulation with both lead types in a low-thoracic spine model was simulated

  18. Technical report- Evaluation methodology in the REVIT project

    OpenAIRE

    Mavroudi, Anna; Hadzilacos, Thanasis

    2013-01-01

    The purpose of this technical report is to present a methodological approach for evaluating the REVIT (http://revit.cti.gr) educational venture as a whole and assessing the learning effectiveness of the resulting collaborative e-courses.

  19. HLA RTI performance evaluation

    CSIR Research Space (South Africa)

    Malinga, L

    2009-07-01

    Full Text Available ) • Physical resources (processing power, etc). 2. Evaluation Framework 2.1. Host Machines The physical resources of the federation execution impose limitations to the RTI performance regardless of the implementation [2]. The experiments undertaken... in this paper consisted of at least two host machines running Windows XP Professional Service Pack 2. One host was an Intel(R) Pentium(R) 4 CPU 3.20 GHz, 3.19 GHz with 2.00 GB of RAM. The other host was also an Intel(R) Pentium(R) 4 CPU 3.40 GHz, 3.4 GHz...

  20. 2011 PERFORMANCE ASSESSMENT COMMUNITY OF PRACTICE TECHNICAL EXCHANGE - SUMMARY

    Energy Technology Data Exchange (ETDEWEB)

    Seitz, R.

    2011-12-30

    The Performance Assessment Community of Practice (PA CoP) was developed in 2008 to improve consistency and quality in the preparation of performance assessments (PAs) and risk assessments across the Department of Energy (DOE) Complex. The term, PA, is used to represent all of these modeling applications in this report. The PA CoP goals are to foster the exchange of information among PA practitioners and to share lessons learned from PAs conducted for DOE, commercial disposal facilities, and international entities. Technical exchanges and workshops are a cornerstone of PA CoP activities. Previous technical exchanges have addressed Engineered Barriers (2009 - http://www.cresp.org/education/workshops/pacop/), the Advanced Simulation Capability for Environmental Management and the Cementitious Barriers Partnership (2010 - http://srnl.doe.gov/copexchange/links.htm). Each technical exchange also includes summary presentations regarding activities at DOE, the Nuclear Regulatory Commission (NRC) and other organizations (e.g., International Atomic Energy Agency (IAEA)) as well as a number of presentations from selected sites to provide insight and perspective from on-going modeling activities. Through the deployment of PA Assistance Teams, the PA CoP has also been engaged in the development of new PAs across the DOE Complex. As a way of improving consistency in the preparation of new PAs, the teams provide technical advice and share experiences, noteworthy practices, and lessons learned from previous Low-Level Waste Disposal Facility Federal Review Group (LFRG) reviews. Teams have provided support for PAs at Hanford, Idaho, Paducah and Portsmouth. The third annual PA CoP Technical Exchange was held on May 25-26, 2011 in Atlanta, GA. The PA CoP Steering Committee Meeting held its first meeting on May 24 prior to the Technical Exchange. Decision making using models and software quality assurance were the topical emphasis for the exchange. A new feature at the 2011 technical

  1. Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

    Science.gov (United States)

    Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

    2017-11-01

    Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, ptechnical performance score (task management, team working, situation awareness, decision-making). During CPR with external stressors, the team's technical performance is related to the non-technical skills of the team leader. This may have important implications for training of

  2. Criteria for performance evaluation

    Directory of Open Access Journals (Sweden)

    David J. Weiss

    2009-03-01

    Full Text Available Using a cognitive task (mental calculation and a perceptual-motor task (stylized golf putting, we examined differential proficiency using the CWS index and several other quantitative measures of performance. The CWS index (Weiss and Shanteau, 2003 is a coherence criterion that looks only at internal properties of the data without incorporating an external standard. In Experiment 1, college students (n = 20 carried out 2- and 3-digit addition and multiplication problems under time pressure. In Experiment 2, experienced golfers (n = 12, also college students, putted toward a target from nine different locations. Within each experiment, we analyzed the same responses using different methods. For the arithmetic tasks, accuracy information (mean absolute deviation from the correct answer, MAD using a coherence criterion was available; for golf, accuracy information using a correspondence criterion (mean deviation from the target, also MAD was available. We ranked the performances of the participants according to each measure, then compared the orders using Spearman's rextsubscript{s}. For mental calculation, the CWS order correlated moderately (rextsubscript{s} =.46 with that of MAD. However, a different coherence criterion, degree of model fit, did not correlate with either CWS or accuracy. For putting, the ranking generated by CWS correlated .68 with that generated by MAD. Consensual answers were also available for both experiments, and the rankings they generated correlated highly with those of MAD. The coherence vs. correspondence distinction did not map well onto criteria for performance evaluation.

  3. Evaluation of River Bend Station Unit 1 Technical Specifications

    International Nuclear Information System (INIS)

    Baxter, D.E.; Bruske, S.J.

    1985-08-01

    This document was prepared for the Nuclear Regulatory Commission (NRC) to assist them in determining whether the River Bend Station Unit 1 Technical Specifications (T/S), which govern plant systems configurations and operations, are in conformance with the requirements of the Final Safety Analysis Report (FSAR) as amended, and the requirements of the Safety Evaluation Report (SER) as supplemented. A comparative audit of the FSAR as amended, and the SER as supplemented was performed with the River Bend T/S. Several discrepancies were identified and subsequently resolved through discussions with the cognizant NRC reviewer, NRC staff reviewers and/or utility representatives. The River Bend Station Unit 1 T/S, to the extent reviewed, are in conformance with the FSAR and SER

  4. Evaluation of Perry Nuclear Power Plant Unit 1 technical specifications

    International Nuclear Information System (INIS)

    Baxter, D.E.; Bruske, S.J.

    1985-11-01

    This document was prepared for the Nuclear Regulatory Commission (NRC) to assist them in determining whether the Perry Nuclear Power Plant Unit 1 Technical Specifications (T/S), which govern plant systems configurations and operations, are in conformance with the requirements of the Final Safety Analysis Report (FSAR) as amended, and the requirements of the Safety Evaluation Report (SER) as supplemented. A comparative audit of the FSAR as amended, and the SER as supplemented was performed with the Perry T/S. Several discrepancies were identified and subsequently resolved through telephone conversations with the staff reviewer and the utility representative. Pending completion of the resolutions noted in Parts 3 and 4 of this report, the Perry Nuclear Power Plant Unit 1 T/S, to the extent reviewed, are in conformance with the FSAR and SER

  5. Testing the performance of technical trading rules in the Chinese markets based on superior predictive test

    Science.gov (United States)

    Wang, Shan; Jiang, Zhi-Qiang; Li, Sai-Ping; Zhou, Wei-Xing

    2015-12-01

    Technical trading rules have a long history of being used by practitioners in financial markets. The profitable ability and efficiency of technical trading rules are yet controversial. In this paper, we test the performance of more than seven thousand traditional technical trading rules on the Shanghai Securities Composite Index (SSCI) from May 21, 1992 through June 30, 2013 and China Securities Index 300 (CSI 300) from April 8, 2005 through June 30, 2013 to check whether an effective trading strategy could be found by using the performance measurements based on the return and Sharpe ratio. To correct for the influence of the data-snooping effect, we adopt the Superior Predictive Ability test to evaluate if there exists a trading rule that can significantly outperform the benchmark. The result shows that for SSCI, technical trading rules offer significant profitability, while for CSI 300, this ability is lost. We further partition the SSCI into two sub-series and find that the efficiency of technical trading in sub-series, which have exactly the same spanning period as that of CSI 300, is severely weakened. By testing the trading rules on both indexes with a five-year moving window, we find that during the financial bubble from 2005 to 2007, the effectiveness of technical trading rules is greatly improved. This is consistent with the predictive ability of technical trading rules which appears when the market is less efficient.

  6. The Vehicle Integrated Performance Analysis Experience: Reconnecting With Technical Integration

    Science.gov (United States)

    McGhee, D. S.

    2006-01-01

    Very early in the Space Launch Initiative program, a small team of engineers at MSFC proposed a process for performing system-level assessments of a launch vehicle. Aimed primarily at providing insight and making NASA a smart buyer, the Vehicle Integrated Performance Analysis (VIPA) team was created. The difference between the VIPA effort and previous integration attempts is that VIPA a process using experienced people from various disciplines, which focuses them on a technically integrated assessment. The foundations of VIPA s process are described. The VIPA team also recognized the need to target early detailed analysis toward identifying significant systems issues. This process is driven by the T-model for technical integration. VIPA s approach to performing system-level technical integration is discussed in detail. The VIPA process significantly enhances the development and monitoring of realizable project requirements. VIPA s assessment validates the concept s stated performance, identifies significant issues either with the concept or the requirements, and then reintegrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program s insight and review process. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful

  7. The impact of nontechnical skills on technical performance in surgery: a systematic review.

    Science.gov (United States)

    Hull, Louise; Arora, Sonal; Aggarwal, Rajesh; Darzi, Ara; Vincent, Charles; Sevdalis, Nick

    2012-02-01

    Failures in nontechnical and teamwork skills frequently lie at the heart of harm and near-misses in the operating room (OR). The purpose of this systematic review was to assess the impact of nontechnical skills on technical performance in surgery. MEDLINE, EMBASE, PsycINFO databases were searched, and 2,041 articles were identified. After limits were applied, 341 articles were retrieved for evaluation. Of these, 28 articles were accepted for this review. Data were extracted from the articles regarding sample population, study design and setting, measures of nontechnical skills and technical performance, study findings, and limitations. Of the 28 articles that met inclusion criteria, 21 articles assessed the impact of surgeons' nontechnical skills on their technical performance. The evidence suggests that receiving feedback and effectively coping with stressful events in the OR has a beneficial impact on certain aspects of technical performance. Conversely, increased levels of fatigue are associated with detriments to surgical skill. One article assessed the impact of anesthesiologists' nontechnical skills on anesthetic technical performance, finding a strong positive correlation between the 2 skill sets. Finally, 6 articles assessed the impact of multiple nontechnical skills of the entire OR team on surgical performance. A strong relationship between teamwork failure and technical error was empirically demonstrated in these studies. Evidence suggests that certain nontechnical aspects of performance can enhance or, if lacking, contribute to deterioration of surgeons' technical performance. The precise extent of this effect remains to be elucidated. Copyright © 2012 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

  8. Technical and physical determinants of soccer match-play performance in elite youth soccer players.

    Science.gov (United States)

    Rowat, Owain; Fenner, Jonathan; Unnithan, Viswanath

    2017-04-01

    The aim of this study was to evaluate whether physical performance characteristics could be a better predictor than technical skills in determining the technical level of county soccer players in a match situation. With institutional ethics approval, 25 male youth soccer players aged 16-18.5 years from a professional soccer academy in South East Asia were selected and height and body mass were recorded. Players were tested for sexual maturity (pubertal development scale [PDS] self-assessment), aerobic capacity (yo-yo intermittent recovery test level 1 [YYIR1]), repeated sprint ability (7 x 35 m sprints) acceleration (15 m sprint) and four soccer skills tests (dribble with pass, dribbling speed, passing and shooting accuracy). Players' technical ability during match play was assessed in small-sided games of soccer (5 v 5) using a novel game technical scoring chart (scoring chart completed by coaches to assess technical performance in a match situation) developed from criteria (e.g., first touch, dribbling and two footedness) used by youth soccer coaches for talent identification. A Spearman's rank correlation showed the YYIR1 test and 15 m sprint test were limited in predicting technical match performance (r=0.03, P=0.88, r=-0.23, P=0.32 respectively). A Pearson product moment correlation showed that the repeated sprint test was also limited in predicting technical match performance (r=-0.34, P=0.14). A dribbling skill with a pass was found to be the best determinant of a player's technical ability in a match (r=-0.57, P=0.00). Talent identification and selection programs in Asian youth soccer should include a dribbling skill performed with a pass.

  9. Technical indicators of economic performance in dairy sheep farming.

    Science.gov (United States)

    Theodoridis, A; Ragkos, A; Roustemis, D; Arsenos, G; Abas, Z; Sinapis, E

    2014-01-01

    In this study, the level of technical efficiency of 58 sheep farms rearing the Chios breed in Greece was measured through the application of the stochastic frontier analysis method. A Translog stochastic frontier production function was estimated using farm accounting data of Chios sheep farms and the impact of various socio-demographic and biophysical factors on the estimated efficiency of the farms was evaluated. The farms were classified into efficiency groups on the basis of the estimated level of efficiency and a technical and economic descriptive analysis was applied in order to illustrate an indicative picture of their structure and productivity. The results of the stochastic frontier model indicate that there are substantial production inefficiencies among the Chios sheep farms and that these farms could increase their production through the improvement of technical efficiency, whereas the results of the inefficiency effects model reveal that the farm-specific explanatory factors can partly explain the observed efficiency differentials. The measurement of technical inefficiency and the detection of its determinants can be used to form the basis of policy recommendations that could contribute to the development of the sector.

  10. Thermoelectric materials evaluation program. Technical summary report

    Energy Technology Data Exchange (ETDEWEB)

    Hinderman, J.D.

    1979-04-01

    Research progress on the thermoelectric materials evaluation program is reported covering the period January 1, 1976 to September 30, 1978. Topical reports are presented on (1) hot and cold end ..delta..T's, (2) hardware mobility, (3) p-leg sublimation suppression, (4) thermodynamic stability of p-legs, (5) n-leg material process improvements to reduce extraneous resistance, (6) n-leg cracking, (7) dynamic evaluation of converter, and (8) data base and degradation modes. Twenty attachments are included which present supporting drawings, specifications, procedures, and data. (WHK)

  11. Mental Fatigue Impairs Soccer-Specific Physical and Technical Performance.

    Science.gov (United States)

    Smith, Mitchell R; Coutts, Aaron J; Merlini, Michele; Deprez, Dieter; Lenoir, Matthieu; Marcora, Samuele M

    2016-02-01

    To investigate the effects of mental fatigue on soccer-specific physical and technical performance. This investigation consisted of two separate studies. Study 1 assessed the soccer-specific physical performance of 12 moderately trained soccer players using the Yo-Yo Intermittent Recovery Test, Level 1 (Yo-Yo IR1). Study 2 assessed the soccer-specific technical performance of 14 experienced soccer players using the Loughborough Soccer Passing and Shooting Tests (LSPT, LSST). Each test was performed on two occasions and preceded, in a randomized, counterbalanced order, by 30 min of the Stroop task (mentally fatiguing treatment) or 30 min of reading magazines (control treatment). Subjective ratings of mental fatigue were measured before and after treatment, and mental effort and motivation were measured after treatment. Distance run, heart rate, and ratings of perceived exertion were recorded during the Yo-Yo IR1. LSPT performance time was calculated as original time plus penalty time. LSST performance was assessed using shot speed, shot accuracy, and shot sequence time. Subjective ratings of mental fatigue and effort were higher after the Stroop task in both studies (P soccer-specific running, passing, and shooting performance.

  12. CNSC EOC technical assessment and evaluation initiatives

    International Nuclear Information System (INIS)

    Cole, Christopher

    2014-01-01

    In Canada, multiple layers of government respond to a nuclear emergency. Although the licensee is responsible for all on-site mitigating actions, the Provincial and Municipal governments take responsibility for all off-site decisions such evacuation and the distribution of Potassium Iodide pills. The Federal Government provides support for the Provincial Government as required or requested. The CNSC forms part of the Federal Government and has the unique capability of fully understanding the phenomena of a nuclear accident. As such, the CNSC plays a key role at the federal level, the provincial level, and with the licensee if a nuclear emergency were to unfold. The Emergency Operations Centre (EOC) at the Canadian Nuclear Safety Commission (CNSC) in Ottawa is activated for all events which are leading or could lead to significant on-site or off-site consequences, and where the consequences of the event will be strongly affected by the operator's actions. During a nuclear emergency the CNSC's regulatory role is to provide assurance that appropriate actions are taken to limit the risk to health, safety, security and the environment. A key component to the EOC is the Technical Assessment Section (TAS). The TAS is primarily responsible for diagnosing the state of the accident and providing a prognosis for the accident progression. The section provides a predictive source term and dispersion calculation for both the diagnosis and the prognosis. The associated dose to public and site staff is assessed. The potential dose to safety workers, on-site staff and the public is compared against assessments made by the provincial authorities to confirm that adequate protective measures are implemented. In order to meet this mandate, steps have been taken to put in place both procedures and tools for the TAS. These include in-house developed codes such as the NPP Accident Handbook and VETA as well as the industry standard dispersion and dose code Emergency Response Projection

  13. Regulatory analysis technical evaluation handbook. Final report

    International Nuclear Information System (INIS)

    1997-01-01

    The purpose of this Handbook is to provide guidance to the regulatory analyst to promote preparation of quality regulatory analysis documents and to implement the policies of the Regulatory Analysis Guidelines of the US Nuclear Regulatory Commission (NUREG/BR-0058 Rev. 2). This Handbook expands upon policy concepts included in the NRC Guidelines and translates the six steps in preparing regulatory analyses into implementable methodologies for the analyst. It provides standardized methods of preparation and presentation of regulatory analyses, with the inclusion of input that will satisfy all backfit requirements and requirements of NRC's Committee to Review Generic Requirements. Information on the objectives of the safety goal evaluation process and potential data sources for preparing a safety goal evaluation is also included. Consistent application of the methods provided here will result in more directly comparable analyses, thus aiding decision-makers in evaluating and comparing various regulatory actions. The handbook is being issued in loose-leaf format to facilitate revisions. NRC intends to periodically revise the handbook as new and improved guidance, data, and methods become available

  14. Regulatory analysis technical evaluation handbook. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    The purpose of this Handbook is to provide guidance to the regulatory analyst to promote preparation of quality regulatory analysis documents and to implement the policies of the Regulatory Analysis Guidelines of the US Nuclear Regulatory Commission (NUREG/BR-0058 Rev. 2). This Handbook expands upon policy concepts included in the NRC Guidelines and translates the six steps in preparing regulatory analyses into implementable methodologies for the analyst. It provides standardized methods of preparation and presentation of regulatory analyses, with the inclusion of input that will satisfy all backfit requirements and requirements of NRC`s Committee to Review Generic Requirements. Information on the objectives of the safety goal evaluation process and potential data sources for preparing a safety goal evaluation is also included. Consistent application of the methods provided here will result in more directly comparable analyses, thus aiding decision-makers in evaluating and comparing various regulatory actions. The handbook is being issued in loose-leaf format to facilitate revisions. NRC intends to periodically revise the handbook as new and improved guidance, data, and methods become available.

  15. Technical evaluation of bids for nuclear power plants

    International Nuclear Information System (INIS)

    1981-01-01

    In continuation of its efforts to provide comprehensive and impartial guidance to Member States facing the need to introduce nuclear power, the International Atomic Energy Agency is issuing this guidebook as part of a series of guidebooks and codes of practice and, in particular, as a necessary supplement to 'Economic Evaluation of Bids for Nuclear Power Plants: A Guidebook', published by the IAEA in 1976 as Technical Reports Series No.175. The present publication is intended for project managers and senior engineers of electric utilities who are concerned with the evaluation of bids for a nuclear power project. It assumes that the reader has a good knowledge of the technical characteristics of nuclear power plants and of nuclear power project implementation. Its purpose is to provide the information necessary to organize, guide and supervise the technical evaluation of bids for a nuclear power project. It goes without saying that the technical staff carrying out the evaluation must have prior technical experience which cannot be provided by a guidebook

  16. Zambia - Threshold Performance Evaluation

    Data.gov (United States)

    Millennium Challenge Corporation — The MCC commissioned this ex post evaluation to provide an objective and rigorous assessment of the effectiveness and efficacy of ZTP activities. The evaluation team...

  17. 77 FR 69541 - Technical Report Evaluating the Effectiveness of Tire Pressure Monitoring Systems (TPMS) in...

    Science.gov (United States)

    2012-11-19

    ...-0167] Technical Report Evaluating the Effectiveness of Tire Pressure Monitoring Systems (TPMS) in...), Department of Transportation. ACTION: Request for comments on technical report. SUMMARY: This notice announces NHTSA's publication of a Technical Report reviewing and evaluating its existing Safety Standard...

  18. Draft Technical Position Subtask 1.1: waste package performance after repository closure. Volume 1

    International Nuclear Information System (INIS)

    Davis, M.S.; Schweitzer, D.G.

    1983-08-01

    This document provides guidance to the DOE on the issues and information necessary for the NRC to evaluate waste package performance after repository closure. Minimal performance objectives of the waste package are required by proposed 10 CFR 60. This Draft Technical Position describes the various options available to the DOE for compliance and discusses advantages and disadvantages of various choices. Examples are discussed dealing with demonstrability, predictability and reasonable assurance. The types of performance are considered. The document summarizes presently identified high priority issues needed to evaluate waste package performance after repository closure. 20 references, 7 tables

  19. Implementing and Evaluating a National Certification Technical Skills Examination: The Colorectal Objective Structured Assessment of Technical Skill.

    Science.gov (United States)

    de Montbrun, Sandra; Roberts, Patricia L; Satterthwaite, Lisa; MacRae, Helen

    2016-07-01

    To implement the Colorectal Objective Structured Assessment of Technical skill (COSATS) into American Board of Colon and Rectal Surgery (ABCRS) certification and build evidence of validity for the interpretation of the scores of this high stakes assessment tool. Currently, technical skill assessment is not a formal component of board certification. With the technical demands of surgical specialties, documenting competence in technical skill at the time of certification with a valid tool is ideal. In September 2014, the COSATS was a mandatory component of ABCRS certification. Seventy candidates took the examination, with their performance evaluated by expert colorectal surgeons using a task-specific checklist, global rating scale, and overall performance scale. Passing scores were set and compared using 2 standard setting methodologies, using a compensatory and conjunctive model. Inter-rater reliability and the reliability of the pass/fail decision were calculated using Cronbach alpha and Subkoviak methodology, respectively. Overall COSATS scores and pass/fail status were compared with results on the ABCRS oral examination. The pass rate ranged from 85.7% to 90%. Inter-rater reliability (0.85) and reliability of the pass/fail decision (0.87 and 0.84) were high. A low positive correlation (r= 0.25) was seen between the COSATS and oral examination. All individuals who failed the COSATS passed the ABCRS oral examination. COSATS is the first technical skill examination used in national surgical board certification. This study suggests that the current certification process may be failing to identify individuals who have demonstrated technical deficiencies on this standardized assessment tool.

  20. Performance Evaluations in Audit Firms

    DEFF Research Database (Denmark)

    Riise Johansen, Thomas; Christoffersen, Jeppe

    2017-01-01

    Previous research has only minimally examined the association between the behaviour and performance evaluations of individual auditors beyond the use of efficiency-focused evaluations. We examine the association between dysfunctional auditor behaviour and three evaluation foci: an efficiency focus......, our results show that it seems possible to limit dysfunctional behaviours through a quality focus in performance evaluations. Our results provide insights of use to practitioners and regulators on how performance evaluations may not only induce but also reduce dysfunctional auditor behaviours....

  1. Tanzania - Threshold Performance Evaluation

    Data.gov (United States)

    Millennium Challenge Corporation — The methodologies employed by the evaluation are both quantitative and qualitative. Wherever possible, we obtain data and employ an identification strategy with...

  2. Technical indicators of financial performance in the dairy herd.

    Science.gov (United States)

    Kristensen, E; Ostergaard, S; Krogh, M A; Enevoldsen, C

    2008-02-01

    Monte Carlo simulation was used to predict the long-term financial performance related to the technical performance of dairy herds. The indicators addressed were derived from data collected routinely in the herd. They indicated technical performance that can be affected by the farmer or the consultant, and they were derived from expected cause-effect relations between technical performance and financial performance at the herd level. The study included the indicators shape of lactation curve, reproduction efficiency, heifer management, variation between cows in lactation curve persistency, mortality in cows and calves, dynamics of body condition, and somatic cell counts. Each indicator was defined by 2 or 3 levels, and 2- and 3-factor interactions were included in the simulation experiment, which included 72 scenarios. Each scenario was replicated 200 times, and the resulting gross margin per cow was analyzed as the measure of financial performance. The potential effects of the selected indicators on the gross margin were estimated by means of an ANOVA. The final model allowed estimation of the financial value of specific changes within the key performance indicators. This study indicated that improving the shape of the herd-level lactation curve by 1 quartile was associated with an increase in gross margin of euro 227 per cow year. This represents 53% of the additional available gross margin associated with all the management changes included in the study. The improved herd-level lactation curve increased the gross margin 2.6 times more than improved reproduction efficiency, which again increased the gross margin 2.6 to 5.9 times more than improved management related to heifers, body condition score, mortality, and somatic cell counts. These results were implemented in a simple "metamodel" that used data extracted from ordinary management software to predict herd-specific financial performance related to major management changes. The metamodel was derived from

  3. Technical Evaluation of Sample-Processing, Collection, and Preservation Methods

    Science.gov (United States)

    2014-07-01

    policy document entitled The National Strategy for Biosurveillance was released (White House, July 2012) as part of the National Security Strategy...concept of leveraging existing capabilities to “scan and discern the environment,” which implies the use of current technical biosurveillance ...testing of existing sample-processing technologies are expected to enable in silico evaluations of biosurveillance methodologies, equipment, and

  4. Descriptive analysis of context evaluation instrument for technical oral presentation skills evaluation: A case study in English technical communication course

    Science.gov (United States)

    Mohamed, Abdullah-Adnan; Asmawi, Adelina; Hamid, Mohd Rashid Ab; Mustafa, Zainol bin

    2015-02-01

    This paper reports a pilot study of Context Evaluation using a self-developed questionnaire distributed among engineering undergraduates at a university under study. The study aims to validate the self-developed questionnaires used in the Context evaluation, a component in the CIPP Model. The Context evaluation assesses background information for needs, assets, problems and opportunities relevant to beneficiaries of the study in a defined environment. Through the questionnaire, background information for the assessment of needs, assets and problems related to the engineering undergraduates' perceptions on the teaching and learning of technical oral presentation skills was collected and analysed. The questionnaire was developed using 5-points Likert scale to measure the constructs under study. They were distributed to 100 respondents with 79 returned. The respondents consisted of engineering undergraduates studied at various faculties at one technical university in Malaysia. The descriptive analysis of data for each item which makes up the construct for Context evaluation is found to be high. This implied that engineering undergraduates showed high interest in teaching and learning of technical oral presentation skills, thus their needs are met. Also, they agreed that assets and facilities are conducive to their learning. In conclusion, the context evaluation involving needs and assets factors are both considerably important; their needs are met and the assets and facilities do support their technical oral presentation skills learning experience.

  5. Instrument performance evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Swinth, K.L.

    1993-03-01

    Deficiencies exist in both the performance and the quality of health physics instruments. Recognizing the implications of such deficiencies for the protection of workers and the public, in the early 1980s the DOE and the NRC encouraged the development of a performance standard and established a program to test a series of instruments against criteria in the standard. The purpose of the testing was to establish the practicality of the criteria in the standard, to determine the performance of a cross section of available instruments, and to establish a testing capability. Over 100 instruments were tested, resulting in a practical standard and an understanding of the deficiencies in available instruments. In parallel with the instrument testing, a value-impact study clearly established the benefits of implementing a formal testing program. An ad hoc committee also met several times to establish recommendations for the voluntary implementation of a testing program based on the studies and the performance standard. For several reasons, a formal program did not materialize. Ongoing tests and studies have supported the development of specific instruments and have helped specific clients understand the performance of their instruments. The purpose of this presentation is to trace the history of instrument testing to date and suggest the benefits of a centralized formal program.

  6. Development of a Technical Library to Support Computer Systems Evaluation

    Directory of Open Access Journals (Sweden)

    Patricia Munson Malley

    1971-12-01

    Full Text Available This paper reports on the development and growth of the United States Army Computer Systems Support and Evaluation Command (USACSSEC Technical Reference Library from a collection of miscellaneous documents related to only fifty computer systems to the present collection of approximately 10,000 hardware/software technical documents related to over 200 systems from 70 manufacturers. Special emphasis is given to the evolution of the filing system and retrieval techniques unique to the USACSSEC Technical Reference Library, i.e., computer listings of available documents in various sequences, and development uf the cataloging system adaptable to computer technology. It is hoped that this paper will be a contribution toward a standard approach in cataloging ADP collections.

  7. Hybrid Corporate Performance Prediction Model Considering Technical Capability

    Directory of Open Access Journals (Sweden)

    Joonhyuck Lee

    2016-07-01

    Full Text Available Many studies have tried to predict corporate performance and stock prices to enhance investment profitability using qualitative approaches such as the Delphi method. However, developments in data processing technology and machine-learning algorithms have resulted in efforts to develop quantitative prediction models in various managerial subject areas. We propose a quantitative corporate performance prediction model that applies the support vector regression (SVR algorithm to solve the problem of the overfitting of training data and can be applied to regression problems. The proposed model optimizes the SVR training parameters based on the training data, using the genetic algorithm to achieve sustainable predictability in changeable markets and managerial environments. Technology-intensive companies represent an increasing share of the total economy. The performance and stock prices of these companies are affected by their financial standing and their technological capabilities. Therefore, we apply both financial indicators and technical indicators to establish the proposed prediction model. Here, we use time series data, including financial, patent, and corporate performance information of 44 electronic and IT companies. Then, we predict the performance of these companies as an empirical verification of the prediction performance of the proposed model.

  8. Independent Technical Review of the X-740 Groundwater Remedy, Portsmouth, Ohio: Technical Evaluation and Recommendations

    International Nuclear Information System (INIS)

    Looney, B.; Rhia, B.; Jackson, D.; Eddy-Dilek, C.

    2010-01-01

    Two major remedial campaigns have been applied to a plume of trichloroethene (TCE) contaminated groundwater near the former X-740 facility at the Portsmouth Gaseous Diffusion Plant in Piketon Ohio. The two selected technologies, phytoremediation using a stand of hybrid poplar trees from 1999-2007 and in situ chemical oxidation using modified Fenton's Reagent from 2008-2009, have proven ineffective in achieving remedial action objectives (RAOs). The 'poor' performance of these technologies is a direct result of site specific conditions and the local contaminant hydrogeology. Key among these challenges is the highly heterogeneous subsurface geology with a thin contaminated aquifer zone (the Gallia) - the behavior of the contamination in the Gallia is currently dominated by slow release of TCE from the clay of the overlying Minford formation, from the sandstone of the underlying Berea formation, and from clayey layers within the Gallia itself. In response to the remediation challenges for the X-740 plume, the Portsmouth team (including the US Department of Energy (DOE), the site contractor (CDM), and the Ohio Environmental Protection Agency (OEPA)) is evaluating the feasibility of remediation at this site and identifying specific alternatives that are well matched to site conditions and that would maximize the potential for achieving RAOs. To support this evaluation, the DOE Office of Groundwater and Soil Remediation (EM-32) assembled a team of experts to serve as a resource and provide input and recommendations to Portsmouth. Despite the challenging site conditions and the failure of the previous two remediation campaigns to adequately move the site toward RAOs, the review team was unanimous in the conclusion that an effective combination of cost effective technologies can be identified. Further, the team expressed optimism that RAOs can be achieved if realistic timeframes are accepted by all parties. The initial efforts of the review team focused on reviewing the

  9. Independent Technical Review of the X-740 Groundwater Remedy, Portsmouth, Ohio: Technical Evaluation and Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B.; Rhia, B.; Jackson, D.; Eddy-Dilek, C.

    2010-04-30

    Two major remedial campaigns have been applied to a plume of trichloroethene (TCE) contaminated groundwater near the former X-740 facility at the Portsmouth Gaseous Diffusion Plant in Piketon Ohio. The two selected technologies, phytoremediation using a stand of hybrid poplar trees from 1999-2007 and in situ chemical oxidation using modified Fenton's Reagent from 2008-2009, have proven ineffective in achieving remedial action objectives (RAOs). The 'poor' performance of these technologies is a direct result of site specific conditions and the local contaminant hydrogeology. Key among these challenges is the highly heterogeneous subsurface geology with a thin contaminated aquifer zone (the Gallia) - the behavior of the contamination in the Gallia is currently dominated by slow release of TCE from the clay of the overlying Minford formation, from the sandstone of the underlying Berea formation, and from clayey layers within the Gallia itself. In response to the remediation challenges for the X-740 plume, the Portsmouth team (including the US Department of Energy (DOE), the site contractor (CDM), and the Ohio Environmental Protection Agency (OEPA)) is evaluating the feasibility of remediation at this site and identifying specific alternatives that are well matched to site conditions and that would maximize the potential for achieving RAOs. To support this evaluation, the DOE Office of Groundwater and Soil Remediation (EM-32) assembled a team of experts to serve as a resource and provide input and recommendations to Portsmouth. Despite the challenging site conditions and the failure of the previous two remediation campaigns to adequately move the site toward RAOs, the review team was unanimous in the conclusion that an effective combination of cost effective technologies can be identified. Further, the team expressed optimism that RAOs can be achieved if realistic timeframes are accepted by all parties. The initial efforts of the review team focused on

  10. Computer Architecture Performance Evaluation Methods

    CERN Document Server

    Eeckhout, Lieven

    2010-01-01

    Performance evaluation is at the foundation of computer architecture research and development. Contemporary microprocessors are so complex that architects cannot design systems based on intuition and simple models only. Adequate performance evaluation methods are absolutely crucial to steer the research and development process in the right direction. However, rigorous performance evaluation is non-trivial as there are multiple aspects to performanceevaluation, such as picking workloads, selecting an appropriate modeling or simulation approach, running the model and interpreting the results usi

  11. OTEC modular experiment: cold water pipe concept evaluation. Volume II. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    1979-04-01

    The Cold Water Pipe System Design Study was undertaken to evaluate the diverse CWP concepts, recommend the most viable alternatives for a 1984 deployment of the 10 to 40 MWe MEP, and carry out preliminary designs of three concepts. The Concept Evaluation Phase reported here involved a systems analysis of design alternatives in the broad categories of rigid walled (with hinges), compliant walled, stockade and bottom mounted buoyant. Quantitative evaluations were made of concept performance, availability, deployment schedule, technical feasibility and cost. CWP concepts were analyzed to determine if they met or could be made to meet established system requirements and could be deployed by 1984. Those which faced overwhelming technical and/or scheduling problems were rejected. Those which were unviable due to isolated, crucial technical and/or scheduling problems for which a technical development may reverse the decisions were deferred. Fabrication, construction and installation plans were developed for successful concepts, and costs were determined in a WBS format. Evaluations were performed on the basis of technical and cost risk. (WHK)

  12. Development and evaluation of a patient-centred measurement tool for surgeons' non-technical skills.

    Science.gov (United States)

    Yule, J; Hill, K; Yule, S

    2018-04-06

    Non-technical skills are essential for safe and effective surgery. Several tools to assess surgeons' non-technical skills from the clinician's perspective have been developed. However, a reliable measurement tool using a patient-centred approach does not currently exist. The aim of this study was to translate the existing Non-Technical Skills for Surgeons (NOTSS) tool into a patient-centred evaluation tool. Data were gathered from four cohorts of patients using an iterative four-stage mixed-methods research design. Exploratory and confirmatory factor analyses were performed to establish the psychometric properties of the tool, focusing on validity, reliability, usability and parsimony. Some 534 patients were recruited to the study. A total of 24 patient-centred non-technical skill items were developed in stage 1, and reduced to nine items in stage 2 using exploratory factor analysis. In stage 3, confirmatory factor analysis demonstrated that these nine items each loaded on to one of three factors, with excellent internal consistency: decision-making, leadership, and communication and teamwork. In stage 4, validity testing established that the new tool was independent of physician empathy and predictive of surgical quality. Surgical leadership emerged as the most dominant skill that patients could recognize and evaluate. A novel nine-item assessment tool has been developed. The Patients' Evaluation of Non-Technical Skills (PENTS) tool allows valid and reliable measurement of surgeons' non-technical skills from the patient perspective. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

  13. Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

    NARCIS (Netherlands)

    Krage, R.; Zwaan, L.; Tjon Soei Len, L.; Kolenbrander, M.; Groeningen, D. van; Loer, S.A.; Wagner, C.; Schober, P.

    2017-01-01

    Background: Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary

  14. Dry Process Fuel Performance Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Myung Seung; Song, K. C.; Moon, J. S. and others

    2005-04-15

    The objective of the project is to establish the performance evaluation system of DUPIC fuel during the Phase II R and D. In order to fulfil this objectives, irradiation test of DUPIC fuel was carried out in HANARO using the non-instrumented and SPND-instrumented rig. Also, the analysis on the in-reactor behavior analysis of DUPIC fuel, out-pile test using simulated DUPIC fuel as well as performance and integrity assessment in a commercial reactor were performed during this Phase. The R and D results of the Phase II are summarized as follows : - Performance evaluation of DUPIC fuel via irradiation test in HANARO - Post irradiation examination of irradiated fuel and performance analysis - Development of DUPIC fuel performance code (modified ELESTRES) considering material properties of DUPIC fuel - Irradiation behavior and integrity assessment under the design power envelope of DUPIC fuel - Foundamental technology development of thermal/mechanical performance evaluation using ANSYS (FEM package)

  15. Development of Performance Indicators for DOTD programs : technical summary.

    Science.gov (United States)

    1998-05-01

    The objective of the research was to evaluate the performance indicators currently in use at DOTD and determine if any deficiencies exist with those that are sent forward as a part of the executive budget. A further objective was to examine the proce...

  16. Meta-analysis of the technical performance of an imaging procedure: guidelines and statistical methodology.

    Science.gov (United States)

    Huang, Erich P; Wang, Xiao-Feng; Choudhury, Kingshuk Roy; McShane, Lisa M; Gönen, Mithat; Ye, Jingjing; Buckler, Andrew J; Kinahan, Paul E; Reeves, Anthony P; Jackson, Edward F; Guimaraes, Alexander R; Zahlmann, Gudrun

    2015-02-01

    Medical imaging serves many roles in patient care and the drug approval process, including assessing treatment response and guiding treatment decisions. These roles often involve a quantitative imaging biomarker, an objectively measured characteristic of the underlying anatomic structure or biochemical process derived from medical images. Before a quantitative imaging biomarker is accepted for use in such roles, the imaging procedure to acquire it must undergo evaluation of its technical performance, which entails assessment of performance metrics such as repeatability and reproducibility of the quantitative imaging biomarker. Ideally, this evaluation will involve quantitative summaries of results from multiple studies to overcome limitations due to the typically small sample sizes of technical performance studies and/or to include a broader range of clinical settings and patient populations. This paper is a review of meta-analysis procedures for such an evaluation, including identification of suitable studies, statistical methodology to evaluate and summarize the performance metrics, and complete and transparent reporting of the results. This review addresses challenges typical of meta-analyses of technical performance, particularly small study sizes, which often causes violations of assumptions underlying standard meta-analysis techniques. Alternative approaches to address these difficulties are also presented; simulation studies indicate that they outperform standard techniques when some studies are small. The meta-analysis procedures presented are also applied to actual [18F]-fluorodeoxyglucose positron emission tomography (FDG-PET) test-retest repeatability data for illustrative purposes. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  17. Vacuum boilers developed heating surfaces technic and economic efficiency evaluation

    Science.gov (United States)

    Slobodina, E. N.; Mikhailov, A. G.; Semenov, B. A.

    2018-01-01

    The vacuum boilers as manufacturing proto types application analysis was carried out, the possible directions for the heating surfaces development are identified with a view to improving the energy efficiency. Economic characteristics to evaluate the vacuum boilers application efficiency (Net Discounted Income (NDI), Internal Rate of Return (IRR), Profitability Index (PI) and Payback Period) are represented. The given type boilers application technic and economic efficiency criteria were established. NDI changing curves depending on the finning coefficient and operating pressure were obtained as a result of the conducted calculation studies.

  18. 77 FR 32712 - Technical Report: Evaluation of the Enhancing Vehicle-to-Vehicle Crash Compatibility Agreement...

    Science.gov (United States)

    2012-06-01

    ...-0070] Technical Report: Evaluation of the Enhancing Vehicle-to-Vehicle Crash Compatibility Agreement... comments on technical report. SUMMARY: This notice announces NHTSA's publication of a Technical Report... be received no later than October 1, 2012. ADDRESSES: Report: The technical report is available on...

  19. Technical Quality of Root Fillings Performed by Dental Students in Babol Dental School

    Directory of Open Access Journals (Sweden)

    Maryam Ehsani

    2014-06-01

    Full Text Available Introduction: There is substantial evidence that the technical quality of root canalfilling has a significant effect on the outcome of root canal treatment. Theaim of this study was to evaluate the technical quality of root canal fillingsperformed by dental students. Methods: The records of 325 teethradiographs, treated by dental students in 2008-2009 in Babol Dental School,were selected and evaluated. For each tooth, three periapical radiographs(before treatment, during operation and at the end of treatment were examined.Filling length, density and taper, and presence or absence of void wasevaluated. Obturations that have proper length, density and taper, without anyvoid are classified as acceptable root canal fillings. The SPSS statisticalsoftware and Chi-Square test were used for analysis. Results: Of the 325radiographs, 72% had good length and 75% had acceptable taper. There were 14.2%low densities, whereas, only 3.32% of teeth have no void. At least 17.8% ofteeth had underfilling and 10.2% overfilling. Finally, only 17.5% of teethshowed acceptable filling length, taper and density without any void. There wasno significant difference between the 4th and 5th yearstudents and oral hygienist (who studied oral hygiene and now continuing it todentistry in root canal filling quality (P> 0.05. Conclusion:Technical quality of root fillings performed by dental students was found to beless than 20%. .It should be revised in the endodontic curriculum requirementto improve their performance

  20. Licensee Performance Evaluation: Phase II

    International Nuclear Information System (INIS)

    Chakoff, H.E.; Speaker, D.M.; Thompson, S.R.; Cohen, S.C.

    1979-08-01

    This report details work performed during the second phase of a two-phase contract to develop methodology for Licensee Performance Evaluation. The Phase I report, NUREG/CR-0110 details initial efforts on the contract. The model developed in Phase I was used to evaluate nine additional facilities for this report. Performance indicators from noncompliance data were also evaluated. Methodology was developed employing the noncompliance indicators and used for 12 case studies. It was found that licensee event report indicators could be more easily identified and utilized than noncompliance indicators based on presently available data systems. However, noncompliance data, appropriately related to cause, could provide real insight into why performance was what it was

  1. Technical Evaluation Report 5: Classification of DE Delivery Systems

    Directory of Open Access Journals (Sweden)

    Diane Belyk

    2002-01-01

    Full Text Available For their optimal use in distance education (DE, online educational applications need to be integrated within a comprehensive course management system (CMS. Such systems are server-based software that supports the development, delivery, administration, and evaluation of online learning environments. The selection of an appropriate CMS should be considered from the multiple perspectives of the student, the course developer, the course instructor/ tutor, the technical support staff, and the DE institution’s administration. The current evaluation of CMS packages was conducted by a team of individuals with experience and contacts in relation to each of these DE user types. The report compares a series of CMS packages in terms of their range of features, and in relation to their satisfaction of international online education standards.

  2. User Evaluation of the NASA Technical Report Server Recommendation Service

    Science.gov (United States)

    Nelson, Michael L.; Bollen, Johan; Calhoun, JoAnne R.; Mackey, Calvin E.

    2004-01-01

    We present the user evaluation of two recommendation server methodologies implemented for the NASA Technical Report Server (NTRS). One methodology for generating recommendations uses log analysis to identify co-retrieval events on full-text documents. For comparison, we used the Vector Space Model (VSM) as the second methodology. We calculated cosine similarities and used the top 10 most similar documents (based on metadata) as recommendations . We then ran an experiment with NASA Langley Research Center (LaRC) staff members to gather their feedback on which method produced the most quality recommendations. We found that in most cases VSM outperformed log analysis of co-retrievals. However, analyzing the data revealed the evaluations may have been structurally biased in favor of the VSM generated recommendations. We explore some possible methods for combining log analysis and VSM generated recommendations and suggest areas of future work.

  3. Thermoelectric materials evaluation program. Quarterly technical task report No. 46

    International Nuclear Information System (INIS)

    Hampl, E.F. Jr.

    1976-02-01

    This forty-sixth Technical Task Report prepared under contract E(11-1)-2331 with the U.S. AEC and U.S. ERDA covers the performance period from October 1, 1975, to December 31, 1975. Highlights include the following tasks: N-type material development (material synthesis--gadolinium selenide compositions; material analyses; material processing; element contacting; ingradient compatibility and life testing; mechanical property characterization), TPM-217 P-type characterization (material preparation and analyses; element contacting; thermodynamic stability; isothermal chemical compatibility; ingradient compatibility and ingradient life testing; performance mapping of contacted and noncontacted elements; high-temperature partitioned P-legs), couple development (design and development of TPM-217/gadolinium selenide rare earth chalcogenide couple; design and development of TPM-217/3N-PbTe couples; advanced generator concepts), module development, liaison with Jet Propulsion Laboratory and material supply, liaison with GGA, and program management. 24 figures, 27 tables

  4. Exploring the Capability of Evaluating Technical Solutions: A Collaborative Study into the Primary Technology Classroom

    Science.gov (United States)

    Björkholm, Eva

    2014-01-01

    Within the field of technology education, evaluating technical solutions is considered as an important topic. Research indicates that pupils have difficulties in evaluating technical solutions in terms of fitness for purpose, i.e. how effective a technical solution supports its intended function. By using the learning study, which is an iterative…

  5. Temporal Changes in Technical and Physical Performances During a Small-Sided Game in Elite Youth Soccer Players.

    Science.gov (United States)

    Moreira, Alexandre; Saldanha Aoki, Marcelo; Carling, Chris; Alan Rodrigues Lopes, Rafael; Felipe Schultz de Arruda, Ademir; Lima, Marcelo; Cesar Correa, Umberto; Bradley, Paul S

    2016-12-01

    There have been claims that small-sided games (SSG) may generate an appropriate environment to develop youth players' technical performance associated to game-related problem solving. However, the temporal change in technical performance parameters of youth players during SSG is still unknown. The aim of this study was to examine temporal changes in technical and physical performances during a small-sided game (SSG) in elite soccer players. Sixty elite youth players (age 14.8 ± 0.2 yr; stature 177 ± 5 cm; body mass 66.2 ± 4.7 kg) completed a 5 v 5 SSG using two repetitions of 8 minutes interspersed by 3 minutes of passive recovery. To evaluate temporal changes in performance, the data were analysed across 4 minutes quarters. Physical performance parameters included the total distance covered (TDC), the frequency of sprints (>18 km•h -1 ), accelerations and decelerations (> 2.0 m•s -2 and - 2.0 m•s -2 ), metabolic power (W•kg -1 ), training impulse (TRIMP), TDC: TRIMP, number of impacts, and body load. Technical performance parameters included goal attempts, total number of tackles, tackles and interceptions, total number of passes, and passes effectiveness. All physical performance parameters decreased from the first to the last quarter with notable declines in TDC, metabolic power and the frequency of sprints, accelerations and decelerations (P 0.05; trivial ES for 1st v 4th quarters: 0.15 - 0.33). The data demonstrate that technical performance is maintained despite substantial declines in physical performance during a SSG in elite youth players. This finding may have implications for designing SSG's for elite youth players to ensure physical, technical and tactical capabilities are optimized. Modifications in player number, pitch dimensions, rules, coach encouragement, for instance, should be included taking into account the main aim of a given session and then focused on overloading physical or technical elements.

  6. Temporal Changes in Technical and Physical Performances During a Small-Sided Game in Elite Youth Soccer Players

    Science.gov (United States)

    Moreira, Alexandre; Saldanha Aoki, Marcelo; Carling, Chris; Alan Rodrigues Lopes, Rafael; Felipe Schultz de Arruda, Ademir; Lima, Marcelo; Cesar Correa, Umberto; Bradley, Paul S

    2016-01-01

    Background There have been claims that small-sided games (SSG) may generate an appropriate environment to develop youth players’ technical performance associated to game-related problem solving. However, the temporal change in technical performance parameters of youth players during SSG is still unknown. Objectives The aim of this study was to examine temporal changes in technical and physical performances during a small-sided game (SSG) in elite soccer players. Methods Sixty elite youth players (age 14.8 ± 0.2 yr; stature 177 ± 5 cm; body mass 66.2 ± 4.7 kg) completed a 5 v 5 SSG using two repetitions of 8 minutes interspersed by 3 minutes of passive recovery. To evaluate temporal changes in performance, the data were analysed across 4 minutes quarters. Physical performance parameters included the total distance covered (TDC), the frequency of sprints (>18 km•h-1), accelerations and decelerations (> 2.0 m•s-2 and - 2.0 m•s-2), metabolic power (W•kg-1), training impulse (TRIMP), TDC: TRIMP, number of impacts, and body load. Technical performance parameters included goal attempts, total number of tackles, tackles and interceptions, total number of passes, and passes effectiveness. Results All physical performance parameters decreased from the first to the last quarter with notable declines in TDC, metabolic power and the frequency of sprints, accelerations and decelerations (P 0.05; trivial ES for 1st v 4th quarters: 0.15 - 0.33). Conclusions The data demonstrate that technical performance is maintained despite substantial declines in physical performance during a SSG in elite youth players. This finding may have implications for designing SSG’s for elite youth players to ensure physical, technical and tactical capabilities are optimized. Modifications in player number, pitch dimensions, rules, coach encouragement, for instance, should be included taking into account the main aim of a given session and then focused on overloading physical or technical

  7. FORECASTING OF PERFORMANCE EVALUATION OF NEW VEHICLES

    Directory of Open Access Journals (Sweden)

    O. S. Krasheninin

    2016-12-01

    Full Text Available Purpose. The research work focuses on forecasting of performance evaluation of the tractive and non-tractive vehicles that will satisfy and meet the needs and requirements of the railway industry, which is constantly evolving. Methodology. Analysis of the technical condition of the existing fleet of rolling stock (tractive and non-tractive of Ukrainian Railways shows a substantial reduction that occurs in connection with its moral and physical wear and tear, as well as insufficient and limited purchase of new units of the tractive and non-tractive rolling stock in the desired quantity. In this situation there is a necessity of search of the methods for determination of rolling stock technical characteristics. One of such urgent and effective measures is to conduct forecasting of the defining characteristics of the vehicles based on the processes of their reproduction in conditions of limited resources using a continuous exponential function. The function of the growth rate of the projected figure degree for the vehicle determines the logistic characteristic that with unlimited resources has the form of an exponent, and with low ones – that of a line. Findings. The data obtained according to the proposed method allowed determining the expected (future value, that is the ratio of load to volume of the body for non-tractive rolling stock (gondola cars and weight-to-power for tractive rolling stock, the degree of forecast reliability and the standard forecast error, which show high prediction accuracy for the completed procedure. As a result, this will allow estimating the required characteristics of vehicles in the forecast year with high accuracy. Originality. The concept of forecasting the characteristics of the vehicles for decision-making on the evaluation of their prospects was proposed. Practical value. The forecasting methodology will reliably determine the technical parameters of tractive and non-tractive rolling stock, which will meet

  8. design analysis and performance evaluation

    African Journals Online (AJOL)

    The design analysis and performance evaluation of an active solar crop dryer was undertaken by drying marched cassava. The drying rate, system drying, collector and pick-up efficiencies were 1.6kg/day (14%/day), 9%, 46% and 29% respectively. Comparatively, the drying rate for sun drying was 0.9kg/day. The collector ...

  9. Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: Does stress have an influence?

    NARCIS (Netherlands)

    Krage, R. (Ralf); L. Zwaan (Laura); Tjon Soei Len, L. (Lian); Kolenbrander, M.W. (Mark W); Van Groeningen, D. (DIck); S.A. Loer (Stephan A.); C. Wagner (Cordula); P. Schober (P.)

    2017-01-01

    textabstractBackground Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary

  10. Performance evaluation of cogeneration power plants

    International Nuclear Information System (INIS)

    Bacone, M.

    2001-01-01

    The free market has changed the criteria for measuring the cogeneration plant performances. Further at the technical-economic parameters, are considered other connected at the profits of the power plant [it

  11. Study on team evaluation (6). Relationships among technical skill proficiency, leadership, and teamwork behaviors

    International Nuclear Information System (INIS)

    Misawa, Ryo; Sasou, Kunihide

    2011-01-01

    To maintain and improve the efficiency and safety of operations in numerous industries, it is necessary to develop programs that enhance teamwork. This can be achieved through empirical investigations that identify influential factors contributing to teamwork. This study focused on technical skill proficiency and leadership as influential factors and examined the relationships among these factors and teamwork behaviors. A series of measurements was performed on 54 operations teams with the cooperation of the training center of thermal power plants. Teamwork behaviors in training under simulated abnormal conditions were evaluated through instructors' observation using a behavior checklist. Technical skill proficiency was measured by conducting a brief survey on instructors. Leadership was measured on the basis of followers' responses on questionnaire scales. Based on the scores of technical skill proficiency and leadership, hierarchical cluster analysis revealed three types of teams: (a) F-type - the technical skills of followers are superior to those of leaders; (b) LF-type - both leaders and followers are proficient in technical skills; and (c) L-type - the technical skills of leaders are superior to those of followers. ANOVAs were conducted to examine differences in teamwork behavior for the three types of teams. The main results revealed that LF-type teams actively engaged in information gathering and that leaders played a central role in these activities. In addition, the followers of F-type teams freely exchanged their ideas and opinions regarding problems and actively discussed how to solve them. These findings suggest that teamwork behaviors can vary depending on technical skill proficiency and leadership in teams. Future research is needed to identify additional factors affecting teamwork that are not measured in this study. (author)

  12. Technical Efficiency Evaluation of Market Age and Enterprise Size ...

    African Journals Online (AJOL)

    Small-scale rearing farmers were more technically efficient, while large-scale brooding farmers showed more technical efficiency in the use of resources than the small-scale ones. The implication is that technical efficiency may not increase in rearing broiler by increasing stock but in brooding business it can be increased by ...

  13. Power System Technical Performance Issues related to the Application of Long HVAC Cables

    DEFF Research Database (Denmark)

    Wiechowski, W.; der Sluis, L.V.; Ohno, Teruo

    2011-01-01

    This paper reports the progress of work of Cigre Working Group C4.502 “Power system technical performance issues related to the application of long HVAC cables”. The primary goal of the WG C4.502 is to write a technical brochure that will serve as practical guide for performing studies necessary ...

  14. Power system technical performance issues related to the application of long HVAC cables

    DEFF Research Database (Denmark)

    Wiechowski, on behalf of Cigre WG C4.502, W.; Sluis, L. V. der; Ohno, Teruo

    2011-01-01

    This paper reports the progress of work of Cigre Working Group C4.502 “Power system technical performance issues related to the application of long HVAC cables”. The primary goal of the WG C4.502 is to write a technical brochure that will serve as practical guide for performing studies necessary ...

  15. INTEGRAL CRITERIA FOR EVALUATION OF SCIENTIFIC AND TECHNICAL RESEARCH

    Directory of Open Access Journals (Sweden)

    Stanislav Nazarevich

    2015-09-01

    Full Text Available In the paper, we develop approaches to the estimation of production enterprises based on the criteria of classification of products, goods and services to innovative products. Developed their qualitative scale for interpreting the results of the evaluation, blind spots, which were not included in the intervals, are compensated by the use of fuzzy sets. In the presented method uses integral criterion based on fuzzy accessory products specific form. The obtained numerical values of the integral criterion reflect the adequacy of the technical characteristics to determine the form of new products, as well as identifying the characteristics of the gap to peers and benchmarks. The technique is applicable to the assessment processes of innovation and competitiveness of new and current products, as well as in dealing with the definition of the innovative features of the new products.

  16. Reduced Text Structure at Two Text Levels: Impacts on the Performance of Technical Readers.

    Science.gov (United States)

    Wenger, Michael J.; Spyridakis, Jan H.

    1993-01-01

    Studies empirically the effects on reader performance of reduced text structure in technical writing texts. Reveals that removal of cues to local coherence produced reliable decrements in reader performance. Discusses results with regard to questions of information design. (HB)

  17. The use of a checklist improves anaesthesiologists' technical and non-technical performance for simulated malignant hyperthermia management.

    Science.gov (United States)

    Hardy, Jean-Baptiste; Gouin, Antoine; Damm, Cédric; Compère, Vincent; Veber, Benoît; Dureuil, Bertrand

    2018-02-01

    Anaesthesiologists may occasionally manage life-threatening operating room (OR) emergencies. Managing OR emergencies implies real-time analysis of often complicated situations, prompt medical knowledge retrieval, coordinated teamwork and effective decision making in stressful settings. Checklists are recommended to improve performance and reduce the risk of medical errors. This study aimed to assess the usefulness of the French Society of Anaesthesia and Intensive Care's (SFAR) "Malignant Hyperthermia" (MH) checklist on a simulated episode of MH crisis and management thereof by registered anesthesiologists. Twenty-four anaesthesiologists were allocated to 2 groups (checklist and control). Their technical performance in adherence with the SFAR guidelines was assessed by a 30-point score and their non-technical performance was assessed by the Anaesthetists' Non-Technical Skills (ANTS) score. Every task completion was assessed independently. Data are shown as median (first-third quartiles). Anaesthesiologists in the checklist group had higher technical performance scores (24/30 (21.5-25) vs 18/30 (15.5-19.5), P=0.002) and ANTS scores (56.5/60 (47.5-58) vs 48.5/60 (41-50.5), P=0.024). They administered the complete initial dose of dantrolene (2mg/kg) more quickly (15.7 minutes [13.9-18.3] vs 22.4 minutes [18.6-25]) than the control group (P=0.017). However, anaesthesiologists deemed the usability of the checklist to be perfectible. Registered anaesthesiologists' use of the MH checklist during a simulation session widely improved their adherence to guidelines and non-technical skills. This study strongly suggests the benefit of checklist tools for emergency management. Notwithstanding, better awareness and training for anaesthesiologists could further improve the use of this tool. Copyright © 2017 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

  18. Evaluating Technical Efficiency of Nursing Care Using Data Envelopment Analysis and Multilevel Modeling.

    Science.gov (United States)

    Min, Ari; Park, Chang Gi; Scott, Linda D

    2016-05-23

    Data envelopment analysis (DEA) is an advantageous non-parametric technique for evaluating relative efficiency of performance. This article describes use of DEA to estimate technical efficiency of nursing care and demonstrates the benefits of using multilevel modeling to identify characteristics of efficient facilities in the second stage of analysis. Data were drawn from LTCFocUS.org, a secondary database including nursing home data from the Online Survey Certification and Reporting System and Minimum Data Set. In this example, 2,267 non-hospital-based nursing homes were evaluated. Use of DEA with nurse staffing levels as inputs and quality of care as outputs allowed estimation of the relative technical efficiency of nursing care in these facilities. In the second stage, multilevel modeling was applied to identify organizational factors contributing to technical efficiency. Use of multilevel modeling avoided biased estimation of findings for nested data and provided comprehensive information on differences in technical efficiency among counties and states. © The Author(s) 2016.

  19. Computed radiography systems performance evaluation

    International Nuclear Information System (INIS)

    Xavier, Clarice C.; Nersissian, Denise Y.; Furquim, Tania A.C.

    2009-01-01

    The performance of a computed radiography system was evaluated, according to the AAPM Report No. 93. Evaluation tests proposed by the publication were performed, and the following nonconformities were found: imaging p/ate (lP) dark noise, which compromises the clinical image acquired using the IP; exposure indicator uncalibrated, which can cause underexposure to the IP; nonlinearity of the system response, which causes overexposure; resolution limit under the declared by the manufacturer and erasure thoroughness uncalibrated, impairing structures visualization; Moire pattern visualized at the grid response, and IP Throughput over the specified by the manufacturer. These non-conformities indicate that digital imaging systems' lack of calibration can cause an increase in dose in order that image prob/ems can be so/ved. (author)

  20. Evaluating Judicial Performance: Editors’ Introduction

    Directory of Open Access Journals (Sweden)

    Francesco Contini

    2014-12-01

    Full Text Available The articles in this issue tackle the conceptual issues associated with defining good judging and the purposes of evaluating judges, and ask such questions as: What values are central to the judicial role? What knowledge, skills, abilities, and other qualities are important to judicial performance? What does scholarship tell us about judging and judicial performance? What are the challenges in measuring judicial performance, the extent to which existing evaluation programs can capture what it means to be a judge, and the potential for developing multi-method evaluation programs? An underlying theme is the nature and desirability of linking evaluations of individual judges with evaluations of the court system and the ways in which results from performance evaluation can be incorporated into educational and other programs designed to promote improvements in the quality of the judiciary. The papers cluster around three major themes: (i Conceptual and methodological issues; (ii Experiences of evaluating judges; and (iii Empirical research findings. Los artículos de este número abordan aspectos conceptuales asociados con el hecho de juzgar de forma correcta y los propósitos de evaluar a los jueces, y plantean preguntas como: ¿qué valores son básicos en el rol judicial? ¿Qué conocimiento, aptitudes, habilidades y otras cualidades son importantes para el rendimiento judicial? ¿Qué nos dice el mundo académico sobre el hecho de juzgar y el rendimiento judicial? ¿Cuáles son los retos en la medición del rendimiento judicial, hasta qué punto los programas de evaluación existentes pueden capturar lo que significa ser un juez, y el potencial para desarrollar programas de evaluación multidisciplinares? Un tema subyacente es la naturaleza y la deseabilidad de unir evaluaciones de jueces individuales con evaluaciones del sistema judicial, y las formas en las que los resultados del rendimiento judicial se pueden incorporar en programas educativos

  1. Learning curves for transapical transcatheter aortic valve replacement in the PARTNER-I trial: Technical performance, success, and safety.

    Science.gov (United States)

    Suri, Rakesh M; Minha, Sa'ar; Alli, Oluseun; Waksman, Ron; Rihal, Charanjit S; Satler, Lowell P; Greason, Kevin L; Torguson, Rebecca; Pichard, Augusto D; Mack, Michael; Svensson, Lars G; Rajeswaran, Jeevanantham; Lowry, Ashley M; Ehrlinger, John; Mick, Stephanie L; Tuzcu, E Murat; Thourani, Vinod H; Makkar, Raj; Holmes, David; Leon, Martin B; Blackstone, Eugene H

    2016-09-01

    Introduction of hybrid techniques, such as transapical transcatheter aortic valve replacement (TA-TAVR), requires skills that a heart team must master to achieve technical efficiency: the technical performance learning curve. To date, the learning curve for TA-TAVR remains unknown. We therefore evaluated the rate at which technical performance improved, assessed change in occurrence of adverse events in relation to technical performance, and determined whether adverse events after TA-TAVR were linked to acquiring technical performance efficiency (the learning curve). From April 2007 to February 2012, 1100 patients, average age 85.0 ± 6.4 years, underwent TA-TAVR in the PARTNER-I trial. Learning curves were defined by institution-specific patient sequence number using nonlinear mixed modeling. Mean procedure time decreased from 131 to 116 minutes within 30 cases (P = .06) and device success increased to 90% by case 45 (P = .0007). Within 30 days, 354 patients experienced a major adverse event (stroke in 29, death in 96), with possibly decreased complications over time (P ∼ .08). Although longer procedure time was associated with more adverse events (P technical performance learning curve (P = .8). The learning curve for TA-TAVR was 30 to 45 procedures performed, and technical efficiency was achieved without compromising patient safety. Although fewer patients are now undergoing TAVR via nontransfemoral access, understanding TA-TAVR learning curves and their relationship with outcomes is important as the field moves toward next-generation devices, such as those to replace the mitral valve, delivered via the left ventricular apex. Copyright © 2016 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

  2. An audit on technical quality of root fillings performed by undergraduate students.

    Science.gov (United States)

    Fong, W; Heidarifar, O; Killough, S; Lappin, M J; El Karim, I A

    2017-06-23

    To evaluate radiographically the technical quality of root fillings performed by undergraduate dental students and to assess whether students were exposed to an appropriate endodontic case mix during their clinical training. A retrospective audit was undertaken evaluating the clinical records of patients who underwent endodontic procedures during the period from September 2015 to June 2016 in the Dental School at Queen's University Belfast, UK. Two final-year dental students were trained and calibrated to evaluate postoperative intra-oral periapical radiographs of completed root canal treatments using specific assessment criteria. Data were presented as frequencies, percentage and mean ± standard deviation (SD). Comparisons of treatment outcomes between groups (posterior and anterior teeth) were calculated using Fisher's exact test, and the level of significance was set at P  0.05). In the majority of the teeth treated by undergraduate students at Queen's University Belfast, the technical quality of the root filling was acceptable and students were exposed to an appropriate case mix for endodontic training. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  3. Factors that influence the non-technical skills performance of scrub nurses: a prospective study.

    Science.gov (United States)

    Kang, Evelyn; Massey, Debbie; Gillespie, Brigid M

    2015-12-01

    To identify and describe the factors that impact on the performance of scrub nurses' non-technical skills performance during the intra-operative phase of surgery. Non-technical skills have been identified as important precursors to errors in the operating room. However, few studies have investigated factors influencing non-technical skills of scrub nurses. Prospective observational study. Structured observations were performed on a sample of 182 surgical procedures across eight specialities by two trained observers from August 2012-April 2013 at two hospital sites. Participants were purposively selected scrub nurses. Bivariate correlations and a multiple linear regression model were used to identify associations among length of surgery, patients' acuity using the American Society of Anesthesiologists classification system, team familiarity, number of occasions scout nurses leave the operating room, change of scout nurse and the outcome, the non-technical skills performance of scrub nurses. Patient acuity and team familiarity were the strongest predictors of scrub nurses' non-technical skills performance at hospital site A. There were no correlations between the predictors and the performance of scrub nurses at hospital site B. A dedicated surgical team and patient acuity potentially influence the performance of scrub nurses' non-technical skills. Familiarity with team members foster advanced planning, thus minimizing distractions and interruptions that impact on scrub nurses' performance. Development of interventions aimed at improving non-technical skills has the potential to make a substantial difference and enhance patient care. © 2015 John Wiley & Sons Ltd.

  4. Technical evaluation of available state of Nevada survey instruments

    International Nuclear Information System (INIS)

    1993-02-01

    Argonne National Laboratory (ANL) is reviewing the survey research studies completed by Mountain West Research (1987-1989) for the state of Nevada's Nuclear Waste Project Office. In this research, 14 survey instruments were used to seek data on whether perceptions of risk could be associated with the possible siting of a high-level radioactive waste repository in Nevada and could be a dominant source of potential, significant, adverse economic impacts. This report presents results from phase 1 of the review, in which ANL contracted with the National Opinion Research Center (NORC) at the University of Chicago to evaluate the technical merits of the nine survey instruments that ANL had been able to acquire. The scope of NORC's work was limited to rating the questions and stating their strengths and weaknesses. NORC concluded that the surveys could provide valuable data about risk perceptions and potential behavioral responses. NORC identified a few minor problems with a number of questions and the calculated response rates but claimed these problems would probably not have any major biasing effect. The NORC evaluation would have been more complete if the terms used in the questionnaires had been defined, all survey instruments had been acquired, and all data had been made available to the public

  5. Scintigraphic evaluation of duodenogastric reflux. Problems, pitfalls, and technical review.

    Science.gov (United States)

    Drane, W E; Karvelis, K; Johnson, D A; Silverman, E D

    1987-05-01

    Bile reflux has been implicated in the pathogenesis of gastritis, gastric ulcer, and esophagitis. Radionuclide techniques provide the only non-invasive method to detect duodenogastric reflux. To analyze the problems that occur with attempts at quantitation, 55 patients were prospectively evaluated (45 patients with reflux esophagitis or Barrett's esophagus and ten patients with clinical symptoms of bile reflux, four of whom had Bilroth II surgery) with Tc-99m DISIDA, using a fasting technique with gallbladder stimulation by sincalide. Visual duodenogastric reflux occurred in 16 of 55 patients. Overlap of small bowel with the stomach is the major problem for accurate quantitation and occurred in 20 of 55 patients (36%). Overlap of left lobe of the liver occurred in 40 of 55 patients (73%), but its contribution to gastric activity was slight and could be easily subtracted. Reflux was intermittent in six of the 16 positive studies (38%), and continuous computer acquisition is needed to detect its maximum value. Primarily because of the problem of small bowel overlap, scintigraphic evaluation of duodenogastric reflux is only, at best, semi-quantitative. A review of the technical variables used in this examination, as well as potential problems that can occur, is provided.

  6. Neurosurgical Skills Assessment: Measuring Technical Proficiency in Neurosurgery Residents Through Intraoperative Video Evaluations.

    Science.gov (United States)

    Sarkiss, Christopher A; Philemond, Steven; Lee, James; Sobotka, Stanislaw; Holloway, Terrell D; Moore, Maximillian M; Costa, Anthony B; Gordon, Errol L; Bederson, Joshua B

    2016-05-01

    Although technical skills are fundamental in neurosurgery, there is little agreement on how to describe, measure, or compare skills among surgeons. The primary goal of this study was to develop a quantitative grading scale for technical surgical performance that distinguishes operator skill when graded by domain experts (residents, attendings, and nonsurgeons). Scores provided by raters should be highly reliable with respect to scores from other observers. Neurosurgery residents were fitted with a head-mounted video camera while performing craniotomies under attending supervision. Seven videos, 1 from each postgraduate year (PGY) level (1-7), were anonymized and scored by 16 attendings, 8 residents, and 7 nonsurgeons using a grading scale. Seven skills were graded: incision, efficiency of instrument use, cauterization, tissue handling, drilling/craniotomy, confidence, and training level. A strong correlation was found between skills score and PGY year (P Technical skills of neurosurgery residents recorded during craniotomy can be measured with high interrater reliability. Surgeons and nonsurgeons alike readily distinguish different skill levels. This type of assessment could be used to coach residents, to track performance over time, and potentially to compare skill levels. Developing an objective tool to evaluate surgical performance would be useful in several areas of neurosurgery education. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Instituting a Surgical Skills Competition Increases Technical Performance of Surgical Clerkship Students Over Time.

    Science.gov (United States)

    Leraas, Harold J; Cox, Morgan L; Bendersky, Victoria A; Sprinkle, Shanna S; Gilmore, Brian F; Gunasingha, Rathnayaka M; Tracy, Elisabeth T; Sudan, Ranjan

    2017-10-04

    Surgical skills training varies greatly between institutions and is often left to students to approach independently. Although many studies have examined single interventions of skills training, no data currently exists about the implementation of surgical skills assessment as a component of the medical student surgical curriculum. We created a technical skills competition and evaluated its effect on student surgical skill development. Second-year medical students enrolled in the surgery clerkship voluntarily participated in a surgical skills competition consisting of knot tying, laparoscopic peg transfer, and laparoscopic pattern cut. Winning students were awarded dinner with the chair of surgery and a resident of their choice. Individual event times and combined times were recorded and compared for students who completed without disqualification. Disqualification included compromising cutting pattern, dropping a peg out of the field of vision, and incorrect knot tying technique. Timed performance was compared for 2 subsequent academic years using Mann-Whitney U test. Overall, 175 students competed and 71 students met qualification criteria. When compared by academic year, 2015 to 2016 students (n = 34) performed better than 2014 to 2015 students (n = 37) in pattern cut (133s vs 167s, p = 0.040), peg transfer (66s vs 101s, p skills competition improves student technical performance. Further research is needed regarding long-term benefits of surgical competitions for medical students. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  8. Indicators for control and evaluation of technical-tactical preparation in team handball

    Directory of Open Access Journals (Sweden)

    Orelbis Aróstica Villa

    2016-06-01

    Full Text Available The need for monitoring and evaluating the technical and tactical preparation as a dialectical unity led us to the determination of the direct influence among the indicators involved in the process of monitoring and evaluating the technical and tactical preparation in the Handball team at School category. In order to carry out this research, a sample of 12 high performance handball trainers from seven provinces of Cuba was used. Once the sample was determined, we proceeded to the application of methods for analyzing the documents and survey just for collecting the data, to analyze and process them so that we could reach conclusions from the research. The papers concludes that the determination of direct influence among indicators may lead the training to be as close as possible to competition, provoking the athlete to get used to acting under mental and emotional pressure and to experience domain in the correct resolution of the situations presented in the competitions. Also, this influence will allow these indicators to make the planning, control and evaluation of the technical and tactical preparation easier, taking into account the potential and characteristics of the individual athletes.

  9. Technical activity profile and influence of body anthropometry on playing performance in female elite team handball

    DEFF Research Database (Denmark)

    Michalsik, Lars B; Aagaard, Per; Madsen, Klavs

    2015-01-01

    To determine the physical demands placed on female elite team handball (TH) players in relation to playing position and body anthropometry, female elite TH primarily field players were monitored during match-play using video recording and subsequent computerized technical match analysis during 5...... regular tournament match seasons. Technical match activities were distributed in 6 major types of playing actions (shots, breakthroughs, fast breaks, technical errors, defensive errors, and tackles) and further divided into various subcategories (e.g., type of shot, hard or light tackles, claspings...... that female elite TH players during competitive games intermittently perform a high number of short-term, high-intense technical playing actions making modern female elite TH a physically demanding team sport. No sign of technical fatigue were observed, since the amount of intense technical playing actions...

  10. Replacing fossil based plastic performance products by bio-based plastic products-Technical feasibility.

    Science.gov (United States)

    van den Oever, Martien; Molenveld, Karin

    2017-07-25

    Larger scale market introduction of new bio-based products requires a clear advantage regarding sustainability, as well as an adequate techno-economic positioning relative to fossil based products. In a previous paper [Broeren et al., 2016], LCA results per kg and per functionality equivalent of bio-based plastics were presented, together with economic considerations. The present paper discusses the mechanical and thermal properties of a range of commercially available bio-based plastics based on polylactic acid (PLA), cellulose esters, starch and polyamides, and the feasibility of replacing fossil-based counterparts based on performance. The evaluation is approached from an end user perspective. First, potentially suitable bio-based plastics are selected based on manufacturers' specifications in technical data sheets, then a first experimental evaluation is performed on injection moulded ISO specimens, and finally a further selection of plastics is tested on large 50×70cm panels. This technical feasibility study indicates that so far bio-based plastics do not completely match the properties of high performance materials like flame retardant V-0 PC/ABS blends used in electronic devices. The performance gap is being decreased by the development of stereocomplex PLA and hybrid PLA blends with polycarbonate, which offer clearly improved properties with respect to maximum usage temperature and toughness. In addition, several materials meet the V-0 flammability requirements needed in specific durable applications. On the other hand, improving these properties so far has negative consequences for the bio-based content. This study also shows that replacement of bulk polymers like PS is feasible using PLA compounds with a bio-based content as high as 85%. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Technical evaluation of proposed Ukrainian Central Radioactive Waste Processing Facility

    Energy Technology Data Exchange (ETDEWEB)

    Gates, R.; Glukhov, A.; Markowski, F.

    1996-06-01

    This technical report is a comprehensive evaluation of the proposal by the Ukrainian State Committee on Nuclear Power Utilization to create a central facility for radioactive waste (not spent fuel) processing. The central facility is intended to process liquid and solid radioactive wastes generated from all of the Ukrainian nuclear power plants and the waste generated as a result of Chernobyl 1, 2 and 3 decommissioning efforts. In addition, this report provides general information on the quantity and total activity of radioactive waste in the 30-km Zone and the Sarcophagus from the Chernobyl accident. Processing options are described that may ultimately be used in the long-term disposal of selected 30-km Zone and Sarcophagus wastes. A detailed report on the issues concerning the construction of a Ukrainian Central Radioactive Waste Processing Facility (CRWPF) from the Ukrainian Scientific Research and Design institute for Industrial Technology was obtained and incorporated into this report. This report outlines various processing options, their associated costs and construction schedules, which can be applied to solving the operating and decommissioning radioactive waste management problems in Ukraine. The costs and schedules are best estimates based upon the most current US industry practice and vendor information. This report focuses primarily on the handling and processing of what is defined in the US as low-level radioactive wastes.

  12. Technical evaluation of proposed Ukrainian Central Radioactive Waste Processing Facility

    International Nuclear Information System (INIS)

    Gates, R.; Glukhov, A.; Markowski, F.

    1996-06-01

    This technical report is a comprehensive evaluation of the proposal by the Ukrainian State Committee on Nuclear Power Utilization to create a central facility for radioactive waste (not spent fuel) processing. The central facility is intended to process liquid and solid radioactive wastes generated from all of the Ukrainian nuclear power plants and the waste generated as a result of Chernobyl 1, 2 and 3 decommissioning efforts. In addition, this report provides general information on the quantity and total activity of radioactive waste in the 30-km Zone and the Sarcophagus from the Chernobyl accident. Processing options are described that may ultimately be used in the long-term disposal of selected 30-km Zone and Sarcophagus wastes. A detailed report on the issues concerning the construction of a Ukrainian Central Radioactive Waste Processing Facility (CRWPF) from the Ukrainian Scientific Research and Design institute for Industrial Technology was obtained and incorporated into this report. This report outlines various processing options, their associated costs and construction schedules, which can be applied to solving the operating and decommissioning radioactive waste management problems in Ukraine. The costs and schedules are best estimates based upon the most current US industry practice and vendor information. This report focuses primarily on the handling and processing of what is defined in the US as low-level radioactive wastes

  13. Technical requirements for implementation of an individual monitoring service for evaluation of operational quantity HP(10) using thermoluminescent dosimetry

    International Nuclear Information System (INIS)

    Francisco, Adelaide Benedita Armando

    2016-01-01

    This work aims to establish technical requirements for the development of a TLDs system for the assessment of operational quantity H P (10), in order to implement an external individual monitoring service in countries who do not have. This allows a better understanding of the technic and the thermoluminescent dosimetry system, thus contributing to identify the technical criteria to be followed by a dosimetry laboratory and evaluation of the dosimetric system performance. For this, the review of the specific literature of the dosimetry field was conducted and later the type and performance tests that must be followed by a dosimetric system were reproduced in practice. In additional was made a analysis of internationals standards norms and the technical regulation used in Brazil, to define the essentials type testes to a dosimetric system. To check the performance of a dosimetry system, a performance analysis of the Brazilian TLDs system was carried out over the past 6 years using the trumpet curve, where it was observed that most of TLDs system, in this review period, were approved and have excellent performance. The technical requirements for the development of a thermoluminescent dosimetry system ensure that the system provides technically reliable results and allow demonstration of compliance with the standard criteria established by national and international standards, and the implementation of the dosimetry system, is verified the compliance of the annual doses limits set for occupationally exposed. (author)

  14. Plant operator performance evaluation system

    International Nuclear Information System (INIS)

    Ujita, Hiroshi; Fukuda, Mitsuko; Kubota, Ryuji.

    1989-01-01

    A plant operator performance evaluation system to analyze plant operation records during accident training and to identify and classify operator errors has been developed for the purpose of supporting realization of a training and education system for plant operators. A knowledge engineering technique was applied to evaluation of operator behavior by both even-based and symptom-based procedures, in various situations including event transition due to multiple failures or operational errors. The system classifies the identified errors as to their single and double types based on Swain's error classification and the error levels reflecting Rasmussen's cognitive level, and it also evaluates the effect of errors on plant state and then classifies error influence, using 'knowledge for phenomena and operations', as represented by frames. It has additional functions for analysis of error statistics and knowledge acquisition support of 'knowledge for operations'. The system was applied to a training analysis for a scram event in a BWR plant, and its error analysis function was confirmed to be effective by operational experts. (author)

  15. 48 CFR 436.604 - Performance evaluation.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Performance evaluation... Performance evaluation. Preparation of performance evaluation reports. (a) In addition to the requirements of FAR 36.604, performance evaluation reports shall be prepared for indefinite-delivery type contracts...

  16. Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3

    International Nuclear Information System (INIS)

    Ulm, Franz-Josef

    2000-01-01

    OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3(NOTE: Part II A item 1 indicates ''PAPER'', but a report is attached electronically)

  17. Small Influence of Performing from Memory on Audience Evaluation

    Directory of Open Access Journals (Sweden)

    Reinhard Kopiez

    2017-09-01

    Full Text Available This study investigates the influence of an actual music stand on the evaluation of a videotaped audio-visual solo instrumental performance. Previous research has provided evidence that the presence of a score or music stand (obstructing the audience's view of the performer might negatively influence the evaluation of the performance. However, due to methodological ambiguities, results in previous studies cannot be regarded as definitive. Thus, we conducted a replication study of Williamon (1999 with better control over confounding variables (e.g., varying levels of technical proficiency in different conditions. A violoncello player performed two pieces for solo instrument: once with a music stand on stage (pretending to play from score and once without. The level of technical proficiency was kept constant in both performance presentations by the use of a pre-recorded, well-rehearsed performance from memory. Audio tracks were synchronized with the performance movements in a playback paradigm. Based on the performance evaluations from a web-based experiment (N = 471 participants, we found a significant but small effect size for the main effect of performance presentation (with vs. without music stand (d = 0.23. We conclude that the audience's appreciation of a particular performance from memory might be based on factors other than the objective performance quality.

  18. Evaluating structured assessment of anaesthesiologists' non-technical skills

    DEFF Research Database (Denmark)

    Jepsen, R M H G; Dieckmann, Gerhard Peter; Spanager, L

    2016-01-01

    BACKGROUND: Non-technical skills (NTS) are essential for safe and efficient anaesthesia. Assessment instruments with appropriate validity evidence can be used to ensure that anaesthesiologists possess the NTS necessary to deliver high-standard patient care. The aims were to collect validity...... evidence using a contemporary validity framework for the assessment instrument Anaesthesiologists' Non-Technical Skills in Denmark (ANTSdk) regarding response process and internal structure (including reliability), and to investigate the effect of rater training on these properties. METHODS: An explorative...

  19. Comparison of methods applicable to evaluation of nuclear power plant technical specifications

    International Nuclear Information System (INIS)

    Cho, N.Z.; Bozoki, G.E.; Youngblood, R.W.

    1986-01-01

    This study compares three probabilistic methods based on the static fault tree analysis, time-dependent unavailability analysis, and Markov analysis, which can be used to evaluate technical specifications in nuclear power plants. They are tested on a sample problem which was devised to closely represent the important and essential characteristics that should be addressed in determination and evaluation of the technical specifications

  20. Is the technical performance of young soccer players influenced by hormonal status, sexual maturity, anthropometric profile, and physical performance?

    Directory of Open Access Journals (Sweden)

    Alexandre Moreira

    2017-12-01

    Full Text Available The aim of this study was to examine the influence of hormonal status, anthropometric profile, sexual maturity level, and physical performance on the technical abilities of 40 young male soccer players during small-sided games (SSGs. Anthropometric profiling, saliva sampling, sexual maturity assessment (Tanner scale, and physical performance tests (Yo-Yo and vertical jumps were conducted two weeks prior to the SSGs. Salivary testosterone was determined by the enzyme-linked immunosorbent assay method. Technical performance was determined by the frequency of actions during SSGs. Principal component analyses identified four technical actions of importance: total number of passes, effectiveness, goal attempts, and total tackles. A multivariate canonical correlation analysis was then employed to verify the prediction of a multiple dependent variables set (composed of four technical actions from an independent set of variables, composed of testosterone concentration, stage of pubic hair and genitalia development, vertical jumps and Yo-Yo performance. A moderate-to-large relationship between the technical performance set and the independent set was observed. The canonical correlation was 0.75 with a canonical R2 of 0.45. The highest structure coefficient in the technical performance set was observed for tackles (0.77, while testosterone presented the highest structure coefficient (0.75 for the variables of the independent set. The current data suggest that the selected independent set of variables might be useful in predicting SSG performance in young soccer players. Coaches should be aware that physical development plays a key role in technical performance to avoid decision-making mistakes during the selection of young players.

  1. Is the technical performance of young soccer players influenced by hormonal status, sexual maturity, anthropometric profile, and physical performance?

    Science.gov (United States)

    Moreira, Alexandre; Massa, Marcelo; Thiengo, Carlos R; Rodrigues Lopes, Rafael Alan; Lima, Marcelo R; Vaeyens, Roel; Barbosa, Wesley P; Aoki, Marcelo S

    2017-12-01

    The aim of this study was to examine the influence of hormonal status, anthropometric profile, sexual maturity level, and physical performance on the technical abilities of 40 young male soccer players during small-sided games (SSGs). Anthropometric profiling, saliva sampling, sexual maturity assessment (Tanner scale), and physical performance tests (Yo-Yo and vertical jumps) were conducted two weeks prior to the SSGs. Salivary testosterone was determined by the enzyme-linked immunosorbent assay method. Technical performance was determined by the frequency of actions during SSGs. Principal component analyses identified four technical actions of importance: total number of passes, effectiveness, goal attempts, and total tackles. A multivariate canonical correlation analysis was then employed to verify the prediction of a multiple dependent variables set (composed of four technical actions) from an independent set of variables, composed of testosterone concentration, stage of pubic hair and genitalia development, vertical jumps and Yo-Yo performance. A moderate-to-large relationship between the technical performance set and the independent set was observed. The canonical correlation was 0.75 with a canonical R 2 of 0.45. The highest structure coefficient in the technical performance set was observed for tackles (0.77), while testosterone presented the highest structure coefficient (0.75) for the variables of the independent set. The current data suggest that the selected independent set of variables might be useful in predicting SSG performance in young soccer players. Coaches should be aware that physical development plays a key role in technical performance to avoid decision-making mistakes during the selection of young players.

  2. Is the technical performance of young soccer players influenced by hormonal status, sexual maturity, anthropometric profile, and physical performance?

    Science.gov (United States)

    Moreira, Alexandre; Massa, Marcelo; Thiengo, Carlos R.; Rodrigues Lopes, Rafael Alan; Lima, Marcelo R.; Vaeyens, Roel; Barbosa, Wesley P.

    2017-01-01

    The aim of this study was to examine the influence of hormonal status, anthropometric profile, sexual maturity level, and physical performance on the technical abilities of 40 young male soccer players during small-sided games (SSGs). Anthropometric profiling, saliva sampling, sexual maturity assessment (Tanner scale), and physical performance tests (Yo-Yo and vertical jumps) were conducted two weeks prior to the SSGs. Salivary testosterone was determined by the enzyme-linked immunosorbent assay method. Technical performance was determined by the frequency of actions during SSGs. Principal component analyses identified four technical actions of importance: total number of passes, effectiveness, goal attempts, and total tackles. A multivariate canonical correlation analysis was then employed to verify the prediction of a multiple dependent variables set (composed of four technical actions) from an independent set of variables, composed of testosterone concentration, stage of pubic hair and genitalia development, vertical jumps and Yo-Yo performance. A moderate-to-large relationship between the technical performance set and the independent set was observed. The canonical correlation was 0.75 with a canonical R2 of 0.45. The highest structure coefficient in the technical performance set was observed for tackles (0.77), while testosterone presented the highest structure coefficient (0.75) for the variables of the independent set. The current data suggest that the selected independent set of variables might be useful in predicting SSG performance in young soccer players. Coaches should be aware that physical development plays a key role in technical performance to avoid decision-making mistakes during the selection of young players. PMID:29472732

  3. Performance Evaluation of the United Nations Environment ...

    Science.gov (United States)

    A request for technical collaboration between the UNEP and the US EPA resulted in the establishment of a MCRADA. The purpose of this agreement was to evaluate an air quality monitoring system (referred to as the UNEP pod) developed by the UNEP for use in environmental situations where more sophisticated monitoring instrumentation was not available. The US EPA has conducted numerous evaluations of other similar sensor pods at its Research Triangle Park, NC research campus and has trained staff as well as established research designs for such efforts. Under the terms of the MCRADA, the US EPA would operate the pod using UNEP provided operating procedures in a manner consistent with its planned intent of deployment. The US EPA would collect air quality monitoring data from the pod involving select environmental measures over a period of approximately one month. Reference monitoring data collected from collocated federal regulatory monitors would be used to establish a comparison between the two systems and thus establishment of performance characteristics. In addition, the US EPA would provide feedback information to the UNEP as to observed ease of use features of the pod that would be beneficial in its future evolution and deployment. The UNEP recently developed a multipollutant sensor pod called the UNEP Air Quality Monitoring Unit, herein simply defined as the UNEP pod (http://aqicn.org/faq/2015-10-28/unep-air-quality-monitoring-station/). First introduced in 20

  4. Barkhausen noise used as a nondestructive evaluation technic of mechanical damage

    International Nuclear Information System (INIS)

    Billy, F.

    1993-12-01

    The results of the application of a micro-magnetic technic relying on magnetic Barkhausen emission in order to proceed to the Nondestructive Evaluation of ferromagnetic materials mechanically damaged are presented. The first experiment, conducted on test specimens of two kinds (mild steel and Cr-Mo-V alloy), for different strain rates, proved that damage increase was measurable by Barkhausen noise. A verification was then performed on an industrial full-size structure, representing the problem posed to EDF, and mechanically fatigued. The trends obtained on test specimens were confirmed, in spite of a larger dispersion of the results. (author). 8 figs., 3 refs

  5. Corrosion performance tests for reinforcing steel in concrete : technical report.

    Science.gov (United States)

    2009-10-01

    The existing test method used to assess the corrosion performance of reinforcing steel embedded in : concrete, mainly ASTM G 109, is labor intensive, time consuming, slow to provide comparative results, : and can be expensive. However, with corrosion...

  6. Long-term performance of GFRP reinforcement : technical report.

    Science.gov (United States)

    2009-12-01

    Significant research has been performed on glass fiber-reinforced polymer (GFRP) concrete reinforcement. : This research has shown that GFRP reinforcement exhibits high strengths, is lightweight, can decrease time of : construction, and is corrosion ...

  7. Proposal for outline of training and evaluation method for non-technical skills

    International Nuclear Information System (INIS)

    Nagasaka, Akihiko; Shibue, Hisao

    2015-01-01

    The purpose of this study is to systematize measures for improvement of emergency response capability focused on non-technical skills. As the results of investigation of some emergency training in nuclear power plant and referring to CRM training, following two issues were picked up. 1) Lack of practical training method for improvement of non-technical skills. 2) Lack of evaluation method of non-technical skills. Then, based on these 7 non-technical skills 'situational awareness' 'decision making' 'communication' 'teamworking' 'leadership' 'managing stress' 'coping with fatigue' are promotion factors to improve emergency response capability, we propose practical training method for each non-technical skill. Also we give example of behavioral markers as evaluation factor, and indicate approaches to introduce the evaluation method of non-technical skills. (author)

  8. Performance Evaluation of Photovoltaic Solar Air Conditioning

    Science.gov (United States)

    Snegirjovs, A.; Shipkovs, P.; Lebedeva, K.; Kashkarova, G.; Migla, L.; Gantenbein, P.; Omlin, L.

    2016-12-01

    Information on the electrical-driven solar air conditioning (SAC) is rather scanty. A considerable body of technical data mostly concerns large-scale photo-voltaic solar air conditioning (PV-SAC) systems. Reliable information about the energy output has arisen only in recent years; however, it is still not easily accessible, and sometimes its sources are closed. Despite these facts, solar energy researchers, observers and designers devote special attention to this type of SAC systems. In this study, performance evaluation is performed for the PV-SAC technology, in which low-power (up to 15 kWp of cooling power on average) systems are used. Such a system contains a PV electric-driven compression chiller with cold and heat sensible thermal storage capacities, and a rejected energy unit used for preheating domestic hot water (DHW). In a non-cooling season, it is possible to partly employ the system in the reverse mode for DHW production. In this mode, the ambient air serves as a heat source. Besides, free cooling is integrated in the PV-SAC concept.

  9. Performance Evaluation of Photovoltaic Solar Air Conditioning

    Directory of Open Access Journals (Sweden)

    Snegirjovs A.

    2016-12-01

    Full Text Available Information on the electrical-driven solar air conditioning (SAC is rather scanty. A considerable body of technical data mostly concerns large-scale photo-voltaic solar air conditioning (PV-SAC systems. Reliable information about the energy output has arisen only in recent years; however, it is still not easily accessible, and sometimes its sources are closed. Despite these facts, solar energy researchers, observers and designers devote special attention to this type of SAC systems. In this study, performance evaluation is performed for the PV-SAC technology, in which low-power (up to 15 kWp of cooling power on average systems are used. Such a system contains a PV electric-driven compression chiller with cold and heat sensible thermal storage capacities, and a rejected energy unit used for preheating domestic hot water (DHW. In a non-cooling season, it is possible to partly employ the system in the reverse mode for DHW production. In this mode, the ambient air serves as a heat source. Besides, free cooling is integrated in the PV-SAC concept.

  10. A technical report on structural evaluation of the Meade County reinforced concrete bridge.

    Science.gov (United States)

    2009-01-01

    This is a technical report on the first phase of the evaluation of the Meade County reinforced concrete bridge. : The first three chapters introduce the main problem and provide a general review of the existing evaluation : methods and the procedures...

  11. Evaluating Indicators and Life Cycle Inventories for Processes in Early Stages of Technical Readiness

    Energy Technology Data Exchange (ETDEWEB)

    Tan, Eric C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Smith, Raymond [U.S. Environmental Protection Agency (EPA); Ruiz-Mercado, Gerardo [U.S. Environmental Protection Agency (EPA)

    2017-11-01

    This presentation examines different methods for analyzing manufacturing processes in the early stages of technical readiness. Before developers know much detail about their processes, it is valuable to apply various assessments to evaluate their performance. One type of assessment evaluates performance indicators to describe how closely processes approach desirable objectives. Another type of assessment determines the life cycle inventories (LCI) of inputs and outputs for processes, where for a functional unit of product, the user evaluates the resources used and the releases to the environment. These results can be compared to similar processes or combined with the LCI of other processes to examine up-and down-stream chemicals. The inventory also provides a listing of the up-stream chemicals, which permits study of the whole life cycle. Performance indicators are evaluated in this presentation with the U.S. Environmental Protection Agency's GREENSCOPE (Gauging Reaction Effectiveness for ENvironmental Sustainability with a multi-Objective Process Evaluator) methodology, which evaluates processes in four areas: Environment, Energy, Economics, and Efficiency. The method develops relative scores for indicators that allow comparisons across various technologies. In this contribution, two conversion pathways for producing cellulosic ethanol from biomass, via thermochemical and biochemical routes, are studied. The information developed from the indicators and LCI can be used to inform the process design and the potential life cycle effects of up- and down-stream chemicals.

  12. A pragmatic approach to IS development and Socio-Technical evaluation

    DEFF Research Database (Denmark)

    Madsen, Sabine; Vidgen, Richard

    , the research is that a focus on task satisfaction and socio-technical evaluation, rather than on the broader concept of job satisfaction and a full, traditional socio-technical analysis, was more acceptable in practice as it related more clearly to the IS domain. The paper presents a socio-technical evaluation......This paper provides an action research account of why and how UML use cases and socio-technical analysis were combined and used to support the development of an information system, using Multiview/WISDM as the framework of ideas. Significant learning points from, and the motivation for...

  13. Evaluation of technical design of advanced information display

    International Nuclear Information System (INIS)

    Cha, Woo Chang; Kang, Young Ju; Ji, Jung Hun; Jang, Sung Pil; Jung, Sung Hae

    2003-03-01

    The performance of human machine system such as nuclear power plant is highly dependent on the suitability of the interface design of the system. As the computer technology is highly developed, the mental model of computer users including NPP operators has been changed from analogue display type-based stereotype to digitalized one. Therefore, it is necessary and confident to consider the issues to evaluate system suitability of advanced information display on CRT or CBP (Computer Based Procedure). This document is intended for providing an updated and expanded set of user-interface guidelines that meet the needs of designing information display on CRT by finding the generic guidelines involving information display design issues as much as possible. The design Issues and resolutions from the finding may provide the cues for the designers and evaluators of the specific man machine interfaces of digitalized devices

  14. Evaluation of technical design of advanced information display

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Woo Chang; Kang, Young Ju; Ji, Jung Hun; Jang, Sung Pil; Jung, Sung Hae [Kumoh National Institute of Technology, Gumi (Korea, Republic of)

    2003-03-15

    The performance of human machine system such as nuclear power plant is highly dependent on the suitability of the interface design of the system. As the computer technology is highly developed, the mental model of computer users including NPP operators has been changed from analogue display type-based stereotype to digitalized one. Therefore, it is necessary and confident to consider the issues to evaluate system suitability of advanced information display on CRT or CBP (Computer Based Procedure). This document is intended for providing an updated and expanded set of user-interface guidelines that meet the needs of designing information display on CRT by finding the generic guidelines involving information display design issues as much as possible. The design Issues and resolutions from the finding may provide the cues for the designers and evaluators of the specific man machine interfaces of digitalized devices.

  15. 48 CFR 2936.604 - Performance evaluation.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Performance evaluation... Performance evaluation. (a) The HCA must establish procedures to evaluate architect-engineer contractor... reports must be made using Standard Form 1421, Performance Evaluation (Architect-Engineer) as prescribed...

  16. 48 CFR 236.604 - Performance evaluation.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Performance evaluation... Architect-Engineer Services 236.604 Performance evaluation. (a) Preparation of performance reports. Use DD Form 2631, Performance Evaluation (Architect-Engineer), instead of SF 1421. (2) Prepare a separate...

  17. Spatial abilities and technical skills performance in health care: a systematic review.

    Science.gov (United States)

    Langlois, Jean; Bellemare, Christian; Toulouse, Josée; Wells, George A

    2015-11-01

    The aim of this study was to conduct a systematic review and meta-analysis of the relationship between spatial abilities and technical skills performance in health care in beginners and to compare this relationship with those in intermediate and autonomous learners. Search criteria included 'spatial abilities' and 'technical skills'. Keywords related to these criteria were defined. A literature search was conducted to 20 December, 2013 in Scopus (including MEDLINE) and in several databases on EBSCOhost platforms (CINAHL Plus with Full Text, ERIC, Education Source and PsycINFO). Citations were obtained and reviewed by two independent reviewers. Articles related to retained citations were reviewed and a final list of eligible articles was determined. Articles were assessed for quality using the Scottish Intercollegiate Guidelines Network-50 assessment instrument. Data were extracted from articles in a systematic way. Correlations between spatial abilities test scores and technical skills performance were identified. A series of 8289 citations was obtained. Eighty articles were retained and fully reviewed, yielding 36 eligible articles. The systematic review found a tendency for spatial abilities to be negatively correlated with the duration of technical skills and positively correlated with the quality of technical skills performance in beginners and intermediate learners. Pooled correlations of studies were -0.46 (p = 0.03) and -0.38 (95% confidence interval [CI] -0.53 to -0.21) for duration and 0.33 (95% CI 0.20-0.44) and 0.41 (95% CI 0.26-0.54) for quality of technical skills performance in beginners and intermediate learners, respectively. However, correlations between spatial abilities test scores and technical skills performance were not statistically significant in autonomous learners. Spatial abilities are an important factor to consider in selecting and training individuals in technical skills in health care. © 2015 John Wiley & Sons Ltd.

  18. Not just trust: factors influencing learners' attempts to perform technical skills on real patients.

    Science.gov (United States)

    Bannister, Susan L; Dolson, Mark S; Lingard, Lorelei; Keegan, David A

    2018-02-15

    As part of their training, physicians are required to learn how to perform technical skills on patients. The previous literature reveals that this learning is complex and that many opportunities to perform these skills are not converted into attempts to do so by learners. This study sought to explore and understand this phenomenon better. A multi-phased qualitative study including ethnographic observations, interviews and focus groups was conducted to explore the factors that influence technical skill learning. In a tertiary paediatric emergency department, staff physician preceptors, residents, nurses and respiratory therapists were observed in the delivery and teaching of technical skills over a 3-month period. A constant comparison methodology was used to analyse the data and to develop a constructivist grounded theory. We conducted 419 hours of observation, 18 interviews and four focus groups. We observed 287 instances of technical skills, of which 27.5% were attempted by residents. Thematic analysis identified 14 factors, grouped into three categories, which influenced whether residents attempted technical skills on real patients. Learner factors included resident initiative, perceived need for skill acquisition and competing priorities. Teacher factors consisted of competing priorities, interest in teaching, perceived need for residents to acquire skills, attributions about learners, assessments of competency, and trust. Environmental factors were competition from other learners, judgement that the patient was appropriate, buy-in from team members, consent from patient or caregivers, and physical environment constraints. Our findings suggest that neither the presence of a learner in a clinical environment nor the trust of the supervisor is sufficient to ensure the learner will attempt a technical skill. We characterise this phenomenon as representing a pool of opportunities to conduct technical skills on live patients that shrinks to a much smaller pool of

  19. Evaluation of emergency department performance

    DEFF Research Database (Denmark)

    Sørup, Christian Michel; Jacobsen, Peter; Forberg, Jakob Lundager

    2013-01-01

    eligibility criteria includes: 1) the main purpose was to discuss, analyse, or promote performance measures best reflecting ED performance, 2) the article was a review article, and 3) the article reported macro-level performance measures, thus reflecting an overall departmental performance level. Results...

  20. Setting Performance Standards for Technical and Nontechnical Competence in General Surgery.

    Science.gov (United States)

    Szasz, Peter; Bonrath, Esther M; Louridas, Marisa; Fecso, Andras B; Howe, Brett; Fehr, Adam; Ott, Michael; Mack, Lloyd A; Harris, Kenneth A; Grantcharov, Teodor P

    2017-07-01

    The objectives of this study were to (1) create a technical and nontechnical performance standard for the laparoscopic cholecystectomy, (2) assess the classification accuracy and (3) credibility of these standards, (4) determine a trainees' ability to meet both standards concurrently, and (5) delineate factors that predict standard acquisition. Scores on performance assessments are difficult to interpret in the absence of established standards. Trained raters observed General Surgery residents performing laparoscopic cholecystectomies using the Objective Structured Assessment of Technical Skill (OSATS) and the Objective Structured Assessment of Non-Technical Skills (OSANTS) instruments, while as also providing a global competent/noncompetent decision for each performance. The global decision was used to divide the trainees into 2 contrasting groups and the OSATS or OSANTS scores were graphed per group to determine the performance standard. Parametric statistics were used to determine classification accuracy and concurrent standard acquisition, receiver operator characteristic (ROC) curves were used to delineate predictive factors. Thirty-six trainees were observed 101 times. The technical standard was an OSATS of 21.04/35.00 and the nontechnical standard an OSANTS of 22.49/35.00. Applying these standards, competent/noncompetent trainees could be discriminated in 94% of technical and 95% of nontechnical performances (P technically and nontechnically competent trainees was identified (P analysis demonstrated case experience and trainee level were both able to predict achieving the standards with an area under the curve (AUC) between 0.83 and 0.96 (P technical and nontechnical performance. Such standards are imperative to implementing summative assessments into surgical training.

  1. Technical match characteristics and influence of body anthropometry on playing performance in male elite team handball

    DEFF Research Database (Denmark)

    Michalsik, Lars Bojsen; Madsen, Klavs; Aagaard, Per

    2015-01-01

    elite team handball players in relation to playing position and body anthropometry. Based on continuous video recording of individual players during elite team handball match-play (62 tournament games, ∼4 players per game), computerized technical match analysis was performed in male elite team handball...... players along with anthropometric measurements over a 6 season time span. Technical match activities were distributed in 6 major types of playing actions (shots, breakthroughs, fast breaks, tackles, technical errors, and defense errors) and further divided into various subcategories (e.g., hard or light...... tackles, type of shot, claspings, screenings, and blockings). Players showed 36.9 ± 13.1 (group mean ± SD) high-intense technical playing actions per match with a mean total effective playing time of 53.85 ± 5.87 minutes. In offense, each player performed 6.0 ± 5.2 fast breaks, received 34.5 ± 21...

  2. Drop performance test and evaluation for HANARO shutoff units

    International Nuclear Information System (INIS)

    Jung, Y. H.; Cho, Y. K.; Lee, J. H.; Choi, Y. S.; Woo, J. S.

    2004-01-01

    The function of the shutoff units of the HANARO is to rapidly insert the shutoff rod into the reactor core for safe shutdown of reactor. This paper describes drop performance test and evaluation for a shutoff unit for the technical verification of lifetime extension and localization of the HANARO shutoff units. We have performed preliminary drop performance tests for a shutoff unit at 1/2-core test loop and analyzed through the comparison with the test results performed during design verification test and the results of the periodic performance test in HANARO. It shows that the results of the local fabrication, installation and alignment for the shutoff unit meet the basic performance requirements, Furthermore, the performance evaluation method of the periodic drop test of the HANARO shutoff units is a conservative method comparing with the real drop time

  3. Technical and economic performance of integrated bioenergy systems

    Energy Technology Data Exchange (ETDEWEB)

    Toft, A.J.; Bridgwater, A.V. [Aston Univ. (United Kingdom). Energy Research Group; Mitchell, C.P.; Watters, M.P. [Aberdeen Univ. (United Kingdom). Wood Supply Research Group; Stevens, D.J. [Cascade Research, Inc. (United States)

    1996-12-31

    A comprehensive study of biomass production, conversion and utilisation systems has been carried out to examine complete bioenergy systems from biomass in the forest to electricity delivered to the grid. Spreadsheet models have been derived for all of the key steps in an integrated process and these have been compiled into an overall BioEnergy Assessment Model (BEAM). The model has also been used to investigate both the performance of different technologies and the effect of different configurations of the same basic system by manipulating the interfaces between feed production, feed conversion and electricity generation. Some of the results of these analyses are presented here. (orig.)

  4. Development of High-Performance Cast Crankshafts. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Mark E [General Motors, Detroit, MI (United States)

    2017-03-31

    The objective of this project was to develop technologies that would enable the production of cast crankshafts that can replace high performance forged steel crankshafts. To achieve this, the Ultimate Tensile Strength (UTS) of the new material needs to be 850 MPa with a desired minimum Yield Strength (YS; 0.2% offset) of 615 MPa and at least 10% elongation. Perhaps more challenging, the cast material needs to be able to achieve sufficient local fatigue properties to satisfy the durability requirements in today’s high performance gasoline and diesel engine applications. The project team focused on the development of cast steel alloys for application in crankshafts to take advantage of the higher stiffness over other potential material choices. The material and process developed should be able to produce high-performance crankshafts at no more than 110% of the cost of current production cast units, perhaps the most difficult objective to achieve. To minimize costs, the primary alloy design strategy was to design compositions that can achieve the required properties with minimal alloying and post-casting heat treatments. An Integrated Computational Materials Engineering (ICME) based approach was utilized, rather than relying only on traditional trial-and-error methods, which has been proven to accelerate alloy development time. Prototype melt chemistries designed using ICME were cast as test specimens and characterized iteratively to develop an alloy design within a stage-gate process. Standard characterization and material testing was done to validate the alloy performance against design targets and provide feedback to material design and manufacturing process models. Finally, the project called for Caterpillar and General Motors (GM) to develop optimized crankshaft designs using the final material and manufacturing processing path developed. A multi-disciplinary effort was to integrate finite element analyses by engine designers and geometry-specific casting

  5. Energy performance evaluation of AAC

    Science.gov (United States)

    Aybek, Hulya

    The U.S. building industry constitutes the largest consumer of energy (i.e., electricity, natural gas, petroleum) in the world. The building sector uses almost 41 percent of the primary energy and approximately 72 percent of the available electricity in the United States. As global energy-generating resources are being depleted at exponential rates, the amount of energy consumed and wasted cannot be ignored. Professionals concerned about the environment have placed a high priority on finding solutions that reduce energy consumption while maintaining occupant comfort. Sustainable design and the judicious combination of building materials comprise one solution to this problem. A future including sustainable energy may result from using energy simulation software to accurately estimate energy consumption and from applying building materials that achieve the potential results derived through simulation analysis. Energy-modeling tools assist professionals with making informed decisions about energy performance during the early planning phases of a design project, such as determining the most advantageous combination of building materials, choosing mechanical systems, and determining building orientation on the site. By implementing energy simulation software to estimate the effect of these factors on the energy consumption of a building, designers can make adjustments to their designs during the design phase when the effect on cost is minimal. The primary objective of this research consisted of identifying a method with which to properly select energy-efficient building materials and involved evaluating the potential of these materials to earn LEED credits when properly applied to a structure. In addition, this objective included establishing a framework that provides suggestions for improvements to currently available simulation software that enhance the viability of the estimates concerning energy efficiency and the achievements of LEED credits. The primary objective

  6. Coaching Non-technical Skills Improves Surgical Residents' Performance in a Simulated Operating Room.

    Science.gov (United States)

    Yule, Steven; Parker, Sarah Henrickson; Wilkinson, Jill; McKinley, Aileen; MacDonald, Jamie; Neill, Adrian; McAdam, Tim

    2015-01-01

    To investigate the effect of coaching on non-technical skills and performance during laparoscopic cholecystectomy in a simulated operating room (OR). Non-technical skills (situation awareness, decision making, teamwork, and leadership) underpin technical ability and are critical to the success of operations and the safety of patients in the OR. The rate of developing assessment tools in this area has outpaced development of workable interventions to improve non-technical skills in surgical training and beyond. A randomized trial was conducted with senior surgical residents (n = 16). Participants were randomized to receive either non-technical skills coaching (intervention) or to self-reflect (control) after each of 5 simulated operations. Coaching was based on the Non-Technical Skills For Surgeons (NOTSS) behavior observation system. Surgeon-coaches trained in this method coached participants in the intervention group for 10 minutes after each simulation. Primary outcome measure was non-technical skills, assessed from video by a surgeon using the NOTSS system. Secondary outcomes were time to call for help during bleeding, operative time, and path length of laparoscopic instruments. Non-technical skills improved in the intervention group from scenario 1 to scenario 5 compared with those in the control group (p = 0.04). The intervention group was faster to call for help when faced with unstoppable bleeding in the final scenario (no. 5; p = 0.03). Coaching improved residents' non-technical skills in the simulated OR compared with those in the control group. Important next steps are to implement non-technical skills coaching in the real OR and assess effect on clinically important process measures and patient outcomes. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  7. Evolving cellular automata to perform computations. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Crutchfield, J.P.; Mitchell, M.

    1998-04-01

    The overall goals of the project are to determine the usefulness of genetic algorithms (GAs) in designing spatially extended parallel systems to perform computational tasks and to develop theoretical frameworks both for understanding the computation in the systems evolved by the GA and for understanding the evolutionary process which successful systems are designed. In the original proposal the authors scheduled the first year of the project to be devoted to experimental grounding. During the first year they developed the simulation and graphics software necessary for doing experiments and analysis on one dimensional cellular automata (CAs), and they performed extensive experiments and analysis concerning two computational tasks--density classification and synchronization. Details of these experiments and results, and a list of resulting publications, were given in the 1994--1995 report. The authors scheduled the second year to be devoted to theoretical development. (A third year, to be funded by the National Science Foundation, will be devoted to applications.) Accordingly, most of the effort during the second year was spent on theory, both of GAs and of the CAs that they evolve. A central notion is that of the computational strategy of a CA, which they formalize in terms of domains, particles, and particle interactions. This formalization builds on the computational mechanics framework developed by Crutchfield and Hanson for understanding intrinsic computation in spatially extended dynamical systems. They have made significant progress in the following areas: (1) statistical dynamics of GAs; (2) formalizing particle based computation in cellular automata; and (3) computation in two-dimensional CAs.

  8. Intelligent Facades for High Performance Green Buildings. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dyson, Anna [Rensselaer Polytechnic Inst., Troy, NY (United States)

    2017-03-01

    Intelligent Facades for High Performance Green Buildings: Previous research and development of intelligent facades systems has been limited in their contribution towards national goals for achieving on-site net zero buildings, because this R&D has failed to couple the many qualitative requirements of building envelopes such as the provision of daylighting, access to exterior views, satisfying aesthetic and cultural characteristics, with the quantitative metrics of energy harvesting, storage and redistribution. To achieve energy self-sufficiency from on-site solar resources, building envelopes can and must address this gamut of concerns simultaneously. With this project, we have undertaken a high-performance building- integrated combined-heat and power concentrating photovoltaic system with high temperature thermal capture, storage and transport towards multiple applications (BICPV/T). The critical contribution we are offering with the Integrated Concentrating Solar Façade (ICSF) is conceived to improve daylighting quality for improved health of occupants and mitigate solar heat gain while maximally capturing and transferring on- site solar energy. The ICSF accomplishes this multi-functionality by intercepting only the direct-normal component of solar energy (which is responsible for elevated cooling loads) thereby transforming a previously problematic source of energy into a high- quality resource that can be applied to building demands such as heating, cooling, dehumidification, domestic hot water, and possible further augmentation of electrical generation through organic Rankine cycles. With the ICSF technology, our team is addressing the global challenge in transitioning commercial and residential building stock towards on-site clean energy self-sufficiency, by fully integrating innovative environmental control systems strategies within an intelligent and responsively dynamic building envelope. The advantage of being able to use the entire solar spectrum for

  9. Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992. Volume 2, Technical basis

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Before disposing of transuranic radioactive waste in the Waste Isolation Pilot Plant (WIPP), the United States Department of Energy (DOE) must evaluate compliance with applicable long-term regulations of the United States Environmental Protection Agency (EPA). Sandia National Laboratories is conducting iterative performance assessments (PAs) of the WIPP for the DOE to provide interim guidance while preparing for a final compliance evaluation. This volume, Volume 2, contains the technical basis for the 1992 PA. Specifically, it describes the conceptual basis for consequence modeling and the PA methodology, including the selection of scenarios for analysis, the determination of scenario probabilities, and the estimation of scenario consequences using a Monte Carlo technique and a linked system of computational models. Additional information about the 1992 PA is provided in other volumes. Volume I contains an overview of WIPP PA and results of a preliminary comparison with the long-term requirements of the EPA`s Environmental Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (40 CFR 191, Subpart B). Volume 3 contains the reference data base and values for input parameters used in consequence and probability modeling. Volume 4 contains uncertainty and sensitivity analyses related to the preliminary comparison with 40 CFR 191B. Volume 5 contains uncertainty and sensitivity analyses of gas and brine migration for undisturbed performance. Finally, guidance derived from the entire 1992 PA is presented in Volume 6.

  10. Attribution Theory and Academic Library Performance Evaluation.

    Science.gov (United States)

    Gedeon, Julie A.; Rubin, Richard E.

    1999-01-01

    Discusses problems with performance evaluations in academic libraries and examines attribution theory, a sociopsychological theory which helps explain how biases may arise in the performance-evaluation process and may be responsible for producing serious and unrecognized inequities. Considers fairness in performance evaluation and differential…

  11. Performance evaluation and financial market runs

    NARCIS (Netherlands)

    Wagner, W.B.

    2013-01-01

    This paper develops a model in which performance evaluation causes runs by fund managers and results in asset fire sales. Performance evaluation nonetheless is efficient as it disciplines managers. Optimal performance evaluation combines absolute and relative components in order to make runs less

  12. 48 CFR 36.604 - Performance evaluation.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Performance evaluation. 36.604 Section 36.604 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL... Performance evaluation. See 42.1502(f) for the requirements for preparing past performance evaluations for...

  13. Longitudinal Trend Analysis of Performance Indicators for South Carolina's Technical Colleges

    Science.gov (United States)

    Hossain, Mohammad Nurul

    2010-01-01

    This study included an analysis of the trend of performance indicators for the technical college sector of higher education in South Carolina. In response to demands for accountability and transparency in higher education, the state of South Carolina developed sector specific performance indicators to measure various educational outcomes for each…

  14. Power System Technical Performance Issues Related to the Application of Long HVAC Cables

    DEFF Research Database (Denmark)

    Bak, Claus Leth

    The aim of this TB is to serve as a practical guide for preparing models and performing studies necessary during the assessment of the technical performance of HV/EHV systems with a large share of (long) AC cables. The brochure follows all phases of planning and analysis of a typical underground...

  15. Performance Evaluation of Rotating Cylinder Type Coffee Bean Roaster

    Directory of Open Access Journals (Sweden)

    Sutarsi

    2010-04-01

    Full Text Available One strategy attempts to reduce dependence on primary commodity markets are overseas market expansion and development of secondary products. In the secondary product processing coffee beans is required of supporting equipment to facilitate these efforts. Research Center for Indonesian Coffee and Cocoa has developed coffee bean roaster. However, there are still many people who do not know about the technical aspects of roaster machine type of rotating cylinder so that more people use traditional ways to roast coffee beans. In order for the benefits of this machine is better known society it is necessary to study on the technical aspects. The purpose of this research is to evaluate the technical performance of the coffee beans roaster machine type of rotating cylinder. These include the technical aspects of work capacity of the machine, roasting technical efficiency, fuel requirements, and power requirements of using roaster machine. Research methods are including data collection, calculation and analysis. The results showed that the roaster machine type of a rotating cylinder has capacity of 12.3 kg/hour. Roasting efficiency is 80%. Fuel consumption is 0.6 kg. The calculated amount of the used power of current measurement is the average of 0.616 kW.

  16. Morphological and maturational predictors of technical performance in young soccer players

    Directory of Open Access Journals (Sweden)

    Marcelo de Oliveira Matta

    2014-09-01

    Full Text Available The purpose of the present study is to describe the association between chronological age, morphology, biological maturation and sport experience in relation to technical performance in young Brazilian soccer players. Technical, maturation and anthropometric variables were assessed in 119 soccer players, 74 and 45 in the under-15 and under-17 categories, respectively. Data were analyzed using a multiple linear regression model. Adiposity was negatively associated with technical performance regardless the age-category. Weight was negatively associated with technical performance in under-15 and positively with the under-17 category, respectively. In under-17 biological maturation was negatively related to the dribbling test and positively associated with the ball control test. Years of experience proved to be positively associated with technique taught to soccer player in the under-17 category. The explained variance was different between categories. The technical performance of Brazilian soccer players aged 14-to-17 seems to be related to biological maturation, adiposity, weight and years of experience.

  17. Guideline for the seismic technical evaluation of replacement items for nuclear power plants

    International Nuclear Information System (INIS)

    Harris, S.P.; Cushing, R.W.; Johnson, H.W.; Abeles, J.M.

    1993-02-01

    Seismic qualification for equipment originally installed in nuclear power plants was typically performed by the original equipment suppliers or manufactures (OES/OEM). Many of the OES/OEM no longer maintain quality assurance programs with adequate controls for supplying nuclear equipment. Utilities themselves must provide reasonable assurance in the continued seismic adequacy of such replacement items. This guideline provides practical, cost-effective techniques which can be used to provide reasonable assurance that replacement items will meet seismic performance requirements necessary to maintain the seismic design basis of commercial nuclear power plants. It also provides a method for determining when a seismic technical evaluation of replacement items (STERI) is required as part of the procurement process for spare and replacement items. Guidance on supplier program requirements necessary to maintain continued seismic adequacy and on documentation of maintaining required seismic adequacy is also included

  18. 40 CFR 63.2354 - What performance tests, design evaluations, and performance evaluations must I conduct?

    Science.gov (United States)

    2010-07-01

    ... evaluations, and performance evaluations must I conduct? 63.2354 Section 63.2354 Protection of Environment... tests, design evaluations, and performance evaluations must I conduct? (a)(1) For each performance test... procedures specified in subpart SS of this part. (3) For each performance evaluation of a continuous emission...

  19. Medicare Administrative Contractor Performance Evaluation

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) has compiled a summary of overall Medicare Administrative Contractor (MAC) performance information as measured...

  20. Independent technical evaluation and recommendations for contaminated groundwater at the department of energy office of legacy management Riverton processing site

    Energy Technology Data Exchange (ETDEWEB)

    Looney, Brain B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Denham, Miles E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Eddy-Dilek, Carol A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2014-04-01

    The U.S. Department of Energy Office of Legacy Management (DOE-LM) manages the legacy contamination at the Riverton, WY, Processing Site – a former uranium milling site that operated from 1958 to 1963. The tailings and associated materials were removed in 1988-1989 and contaminants are currently flushing from the groundwater. DOE-LM commissioned an independent technical team to assess the status of the contaminant flushing, identify any issues or opportunities for DOE-LM, and provide key recommendations. The team applied a range of technical frameworks – spatial, temporal, hydrological and geochemical – in performing the evaluation. In each topic area, an in depth evaluation was performed using DOE-LM site data (e.g., chemical measurements in groundwater, surface water and soil, water levels, and historical records) along with information collected during the December 2013 site visit (e.g., plant type survey, geomorphology, and minerals that were observed, collected and evaluated).

  1. On Electrical Design and Technical Performance Requirements for Large Scale Wind Farms

    DEFF Research Database (Denmark)

    Gordon, Mark; Keerthipala, W.; Fernando, A.

    2009-01-01

    plant operating limits for ensuring power system security at the high voltage point of connection. Experiences presented here refer mainly to few of the selected technical requirements and issues encountered during the process of wind farms connections into Eastern Australian power system. In particular......This paper presents and discusses technical performance requirements for connection of large scale wind turbine generating systems into HV transmission networks. Requirements have been presented for the purpose of achieving performance enhanced operation, reliability and assessment of the power...

  2. Evaluation of the feasibility, economic impact, and effectiveness of underground nuclear power plants. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    Information on underground nuclear power plants is presented concerning underground nuclear power plant concepts; public health impacts; technical feasibility of underground concepts; economic impacts of underground construction; and evaluation of related issues.

  3. Integrated corridor management initiative : demonstration phase evaluation - Dallas technical capability analysis test plan.

    Science.gov (United States)

    This report presents the test plan for conducting the Technical Capability Analysis for the United States : Department of Transportation (U.S. DOT) evaluation of the Dallas U.S. 75 Integrated Corridor : Management (ICM) Initiative Demonstration. The ...

  4. Integrated corridor management initiative : demonstration phase evaluation, San Diego technical capability analysis test plan.

    Science.gov (United States)

    2012-08-01

    This report presents the test plan for conducting the Technical Capability Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the San Diego Integrated Corridor Management (ICM) Initiative Demonstration. The ICM proje...

  5. Evaluation of the feasibility, economic impact, and effectiveness of underground nuclear power plants. Final technical report

    International Nuclear Information System (INIS)

    1978-05-01

    Information on underground nuclear power plants is presented concerning underground nuclear power plant concepts; public health impacts; technical feasibility of underground concepts; economic impacts of underground construction; and evaluation of related issues

  6. Technical and political aspects for site characterization, evaluation and acceptance

    International Nuclear Information System (INIS)

    Kuehn, K.

    1993-01-01

    All countries which use nuclear energy - have to solve the problem how and where to dispose of the radioactive wastes which are generated by application of nuclear energy. Within these radioactive wastes we can differentiate three categories with regard to their disposal: Irradiated fuel elements if they are declared waste. This is the case in the United States, in Canada, Spain, Sweden, and Finland. Some strong trends into this direction can also be observed in Germany. High-level heat-generating wastes which are generated by vitrification - of liquid wastes produced by reprocessing irradiated fuel. This is true for France, United Kingdom, Japan, Germany, Switzerland, Belgium and the Netherlands. But this is also true for those five countries which possess and/or produce nuclear weapons, namely the United States, the former USSR, China, France, and United Kingdom. Low- and intermediate-level radioactive wastes which are mainly produced by operating nuclear power and reprocessing plants but also by other nuclear fuel cycle facilities and through application of radionuclides in industry, medicine and research. Most countries have decided to dispose of these wastes by shallow land burial, like the United States, Canada, Japan, France, and United Kingdom. Some other countries, like Germany, Sweden, Finland, and Switzerland, will dispose of these wastes in underground repositories too. Because of the difficult problem of public acceptance, site selection for a radioactive waste repository is not a pure technical and scientific task. On the contrary, it is mainly a political one. Two examples where possible sites were selected more because of political than of technical reasons are Yucca Mountain in the United States and Gorleben in Germany. There do exist, however, also approaches to select a site on technical and scientific grounds like in Canada, France, or Sweden

  7. Performance of technical trading rules: evidence from Southeast Asian stock markets.

    Science.gov (United States)

    Tharavanij, Piyapas; Siraprapasiri, Vasan; Rajchamaha, Kittichai

    2015-01-01

    This paper examines the profitability of technical trading rules in the five Southeast Asian stock markets. The data cover a period of 14 years from January 2000 to December 2013. The instruments investigated are five Southeast Asian stock market indices: SET index (Thailand), FTSE Bursa Malaysia KLC index (Malaysia), FTSE Straits Times index (Singapore), JSX Composite index (Indonesia), and PSE composite index (the Philippines). Trading strategies investigated include Relative Strength Index, Stochastic oscillator, Moving Average Convergence-Divergence, Directional Movement Indicator and On Balance Volume. Performances are compared to a simple Buy-and-Hold. Statistical tests are also performed. Our empirical results show a strong performance of technical trading rules in an emerging stock market of Thailand but not in a more mature stock market of Singapore. The technical trading rules also generate statistical significant returns in the Malaysian, Indonesian and the Philippine markets. However, after taking transaction costs into account, most technical trading rules do not generate net returns. This fact suggests different levels of market efficiency among Southeast Asian stock markets. This paper finds three new insights. Firstly, technical indicators does not help much in terms of market timing. Basically, traders cannot expect to buy at a relative low price and sell at a relative high price by just using technical trading rules. Secondly, technical trading rules can be beneficial to individual investors as they help them to counter the behavioral bias called disposition effects which is the tendency to sell winning stocks too soon and holding on to losing stocks too long. Thirdly, even profitable strategies could not reliably predict subsequent market directions. They make money from having a higher average profit from profitable trades than an average loss from unprofitable ones.

  8. Ionizing radiation detection meter systems usability evaluation. Technical memorandum

    International Nuclear Information System (INIS)

    Severs, Y.; Hughes, R.; Tack, D.; Bossi, L.L.M.

    2002-12-01

    In support of the Canadian Forces Nuclear Detection, Identification and Dosimetry project a usability trial of three Ionizing Radiation Detection Meter Systems (IRDMS) was conducted 18-22 June 2001 at Connaught Ranges. The systems evaluated: System 1: ANPDR 77 Operational System with PDR 77 Alpha/Beta probes and GPS (Global Positioning System) Training System; System 2: ADM 300C Operational System with ABP 100 Alpha/Beta probes and GPS Training System, and System 3: RAM R200 Operational System with PA 100M and RG12 Alpha/Beta probes and GPS Training System. Twelve military personnel (Private to Captain) determined compliance with the bid evaluation criteria. The counter-balanced study, based on a Latin square design, was divided into two assessment phases, an operational phase and a training system phase, which rotated three groups (of four participants each) concurrently through each IRDMS. Groups were trained in set-up, maintenance and operation of each bid IRDMS prior to evaluation. The operational evaluation consisted of a test/maintenance stand, an indoor/outdoor operational stand, and an indoor,/outdoor training system stand. Participants rated the utility and usability of each system, by measuring case of use/maintenance under a range of relevant operational and clothing conditions, compatibility with soldier tasks, compatibility with clothing, compatibility with equipment and operational environments, and case of learning (including an assessment of initial and refresher training implications). A 7-point Likert-like acceptability rating scale, which covered a range from completely unacceptable (1) to completely acceptable (7), was used to evaluate the measures. The combined weighted mean scores were 584.3 for System 1 (70 o /b), 682.0 for System 2 (81 %) and 756.9 for System 3 (90%) out of a total possible score of 840. Participants reported mean scores for System 1 between barely unacceptable and borderline for both indoor and outdoor operations. System 2

  9. Performance evaluation of Olympic weightlifters.

    Science.gov (United States)

    Garhammer, J

    1979-01-01

    The comparison of weights lifted by athletes in different bodyweight categories is a continuing problem for the sport of olympic weightlifting. An objective mechanical evaluation procedure was developed using basic ideas from a model proposed by Ranta in 1975. This procedure was based on more realistic assumptions than the original model and considered both vertical and horizontal bar movements. Utilization of data obtained from film of national caliber lifters indicated that the proposed method was workable, and that the evaluative indices ranked lifters in reasonable order relative to other comparative techniques.

  10. Portfolio optimization and performance evaluation

    DEFF Research Database (Denmark)

    Juhl, Hans Jørn; Christensen, Michael

    2013-01-01

    Based on an exclusive business-to-business database comprising nearly 1,000 customers, the applicability of portfolio analysis is documented, and it is examined how such an optimization analysis can be used to explore the growth potential of a company. As opposed to any previous analyses, optimal...... customer portfolios are determined, and it is shown how marketing decision-makers can use this information in their marketing strategies to optimize the revenue growth of the company. Finally, our analysis is the first analysis which applies portfolio based methods to measure customer performance......, and it is shown how these performance measures complement the optimization analysis....

  11. Aging evaluation of active components by using performance evaluation

    International Nuclear Information System (INIS)

    Jung, S. K.; Jin, T. E.; Kim, J. S.; Jung, I. S.; Kim, T. R.

    2003-01-01

    Risk analysis and performance evaluation methodology were applied to the aging evaluation of active components in the periodic safety review of Wolsung unit 1. We conclude that evaluation of performance is more effective to discriminate the aging degradation of active component than the evaluation of aging mechanism. It is essential to analyze the common cause failures of low performance components to evaluate the properness of present maintenance system. Past 10 years failure history is used for establishing the performance criteria. Past 2 years failure history is used for the evaluating the recent performance condition. We analyze the failure mode of the components to improve the maintenance system. Performance evaluation methodology is useful for the quantitative evaluation of aging degradation of active components. Analysis on the repeated failures can be useful for the feedback to maintenance plan and interval

  12. Evaluation of isokinetic muscle performance.

    Science.gov (United States)

    Watkins, M P; Harris, B A

    1983-03-01

    The development and availability of isokinetic testing equipment, recording systems, and systems for computer analysis have improved the quality and quantity of information about specific skeletal muscle performance. The value of both isokinetic exercise and instrumentation designed to objectively record muscle performance characteristics is becoming more widely recognized, especially by professional members of the sports medicine community. The present demand for appropriate equipment is high and new instrumentation for this purpose is being developed. Current instrumentation continues to be modified and improved. The information gained from carefully designed testing protocols is useful and necessary for understanding the role of specific muscle groups in athletic performance and for determining the readiness of the athlete to resume training or competition following injury or deconditioning. With expanded profile data about the muscle performance characteristics of various categories of athletes, training or rehabilitation programs may be adapted to meet the strength, speed, and endurance requirements of a given sport, which may enhance the quality of participation and prevent the occurrence of injury or reinjury.

  13. Evaluating judge performance in sport.

    Science.gov (United States)

    Looney, Marilyn A

    2004-01-01

    Many sports, such as, gymnastics, diving, ski jumping, and figure skating, use judges' scores to determine the winner of a competition. These judges use some type of rating scale when judging performances (e.g., figure skating: 0.0 - 6.0). Sport governing bodies have the responsibility of setting and enforcing quality control parameters for judge performance. Given the judging scandals in figure skating at the 1998 and 2002 Olympics, judge performance in sport is receiving greater scrutiny. The purpose of this article is to illustrate how results from Rasch analyses can be used to provide in-depth feedback to judges about their scoring patterns. Nine judges' scores for 20 pairs of figure skaters who competed at the 2002 Winter Olympics were analyzed using a four-faceted (skater pair ability, skating aspect difficulty, program difficulty, and judge severity) Rasch rating scale model that was not common to all judges. Fit statistics, the logical ordering of skating aspects, skating programs, and separation indices all indicated a good fit of the data to the model. The type of feedback that can be given to judges about their scoring pattern was illustrated for one judge (USA) whose performance was flagged as being unpredictable. Feedback included a detailed description of how the rating scale was used; for example, 10% of all marks given by the American judge were unexpected by the model (Z > |2|). Three figures illustrated differences between the judge's observed and expected marks arranged according to the pairs' skating order and final placement in the competition. Scores which may represent "nationalistic bias" or a skating order influence were flagged by looking at these figures. If sport governing bodies wish to improve the performance of their judges, they need to employ methods that monitor the internal consistency of each judge as a many-facet Rasch analysis does.

  14. Circle Detection Performance Evaluation Revisited

    OpenAIRE

    Barney Smith, Elisa,; Lamiroy, Bart

    2015-01-01

    International audience; Circle and circular arc detection in images have been a long standing topic in image analysis. It nds numerous applications for both scanned document images as well as in photographic images. As a result, circle detection algorithms are published regularly and benchmarking data sets and contests have been organized on a regular basis over the last decades. Unfortunately, they have not been able to achieve a very clear image establishing which approaches perform best an...

  15. NREL Evaluates Performance of Fast-Charge Electric Buses

    Energy Technology Data Exchange (ETDEWEB)

    2016-09-16

    This real-world performance evaluation is designed to enhance understanding of the overall usage and effectiveness of electric buses in transit operation and to provide unbiased technical information to other agencies interested in adding such vehicles to their fleets. Initial results indicate that the electric buses under study offer significant fuel and emissions savings. The final results will help Foothill Transit optimize the energy-saving potential of its transit fleet. NREL's performance evaluations help vehicle manufacturers fine-tune their designs and help fleet managers select fuel-efficient, low-emission vehicles that meet their bottom line and operational goals. help Foothill Transit optimize the energy-saving potential of its transit fleet. NREL's performance evaluations help vehicle manufacturers fine-tune their designs and help fleet managers select fuel-efficient, low-emission vehicles that meet their bottom line and operational goals.

  16. Simulation fails to replicate stress in trainees performing a technical procedure in the clinical environment.

    Science.gov (United States)

    Baker, B G; Bhalla, A; Doleman, B; Yarnold, E; Simons, S; Lund, J N; Williams, J P

    2017-01-01

    Simulation-based training (SBT) has become an increasingly important method by which doctors learn. Stress has an impact upon learning, performance, technical, and non-technical skills. However, there are currently no studies that compare stress in the clinical and simulated environment. We aimed to compare objective (heart rate variability, HRV) and subjective (state trait anxiety inventory, STAI) measures of stress theatre with a simulated environment. HRV recordings were obtained from eight anesthetic trainees performing an uncomplicated rapid sequence induction at pre-determined procedural steps using a wireless Polar RS800CX monitor © in an emergency theatre setting. This was repeated in the simulated environment. Participants completed an STAI before and after the procedure. Eight trainees completed the study. The theatre environment caused an increase in objective stress vs baseline (p = .004). There was no significant difference between average objective stress levels across all time points (p = .20) between environments. However, there was a significant interaction between the variables of objective stress and environment (p = .045). There was no significant difference in subjective stress (p = .27) between environments. Simulation was unable to accurately replicate the stress of the technical procedure. This is the first study that compares the stress during SBT with the theatre environment and has implications for the assessment of simulated environments for use in examinations, rating of technical and non-technical skills, and stress management training.

  17. Position of arm and forearm, and elbow flexion during performance of the sculling technique: Technical recommendation versus actual performance

    Directory of Open Access Journals (Sweden)

    Lara Elena Gomes

    2014-03-01

    Full Text Available Sculling motion is a swimming technique executed in a vertical position with the head above the water's surface and, based on the technical recommendation, should be performed maintaining an elbow flexion angle of 90°, arms kept stationary while the forearms move. In order to verify if this recommendation is indeed realistic, the aim of this study was to describe the elbow flexion angle ant its angular velocity, linear speed and range of motion of the shoulder, elbow and wrist during the sculling motion. Data were calculated using three-dimensional kinematic process from underwater video images of ten athletes of synchronized swimming. The results indicate that the arm is relatively stationary and the forearm moves, which agrees with the technical recommendation. However, the elbow flexes and extends, which contradicts the technical recommendation. These findings should be considered when this action is practiced, especially in synchronized swimming, in which sculling motion is a fundamental technique.

  18. 78 FR 65426 - Technical Report: Evaluation of the Certified-Advanced Air Bags

    Science.gov (United States)

    2013-10-31

    ...: Evaluation of the Certified-Advanced Air Bags AGENCY: National Highway Traffic Safety Administration (NHTSA... announces NHTSA's publication of a Technical Report reviewing and evaluating certified-advanced air bags. The report's title is: Evaluation of the Certified-Advanced Air Bags. DATES: Comments must be received...

  19. Evaluating the technical aspects of mixed waste treatment technologies

    International Nuclear Information System (INIS)

    Bagaasen, L.M.; Scott, P.A.

    1992-10-01

    This report discusses treatment of mixed wastes which is thought to be more complicated than treatment of either hazardous or radioactive wastes. In fact, the treatment itself is no more complicated: however, the regulations that define acceptability of the final waste disposal system are significantly more entangled, and sometimes in apparent conflict. This session explores the factors that influence the choice of waste treatment technologies, and expands on some of the limitations to their application. The objective of the presentation is to describe the technical factors that influence potential treatment processes and the ramifications associated with particular selections (for example, the generation of secondary waste streams). These collectively provide a framework for making informed treatment process selections

  20. Simulation analysis for integrated evaluation of technical and commercial risk

    International Nuclear Information System (INIS)

    Gutleber, D.S.; Heiberger, E.M.; Morris, T.D.

    1995-01-01

    Decisions to invest in oil- and gasfield acquisitions or participating interests often are based on the perceived ability to enhance the economic value of the underlying asset. A multidisciplinary approach integrating reservoir engineering, operations and drilling, and deal structuring with Monte Carlo simulation modeling can overcome weaknesses of deterministic analysis and significantly enhance investment decisions. This paper discusses the use of spreadsheets and Monte Carlo simulation to generate probabilistic outcomes for key technical and economic parameters for ultimate identification of the economic volatility and value of potential deal concepts for a significant opportunity. The approach differs from a simple risk analysis for an individual well by incorporating detailed, full-field simulations that vary the reservoir parameters, capital and operating cost assumptions, and schedules on timing in the framework of various deal structures

  1. Technical quality of root canal treatment performed by undergraduate students using hand instrumentation: a meta-analysis.

    Science.gov (United States)

    Ribeiro, D M; Réus, J C; Felippe, W T; Pacheco-Pereira, C; Dutra, K L; Santos, J N; Porporatti, A L; De Luca Canto, G

    2018-03-01

    The technical quality of root canal treatment (RCT) may impact on the outcome. The quality of education received during undergraduate school may be linked to the quality of treatment provided in general dental practice. In this context, the aim of this systematic review was to answer the following focused questions: (i) What is the frequency of acceptable technical quality of root fillings, assessed radiographically, performed by undergraduate students? (ii) What are the most common errors assessed radiographically and reported in these treatments? For this purpose, articles that evaluated the quality of root fillings performed by undergraduate students were selected. Data were collected based on predetermined criteria. The key features from the included studies were extracted. GRADE-tool assessed the quality of the evidence. MAStARI evaluated the methodological quality, and a meta-analysis on all studies was conducted. At the end of the screening, 24 articles were identified. Overall frequency of acceptable technical quality of root fillings was 48%. From this total, 52% related to anterior teeth, 49% to premolars and 26% to molars. The main procedural errors reported were ledge formation, furcation perforation, apical transportation and apical perforation. The heterogeneity amongst the studies was high (84-99%). Five studies had a high risk of bias, eight had a moderate risk, and 11 had low risk. The overall quality of evidence identified was very low. The conclusion was that technical quality of root fillings performed by undergraduate students is low, which may reveal that endodontic education has limited achievement at undergraduate level. A plan to improve the quality of root fillings, and by extrapolation the overall quality of root canal treatment, should be discussed by the staff responsible for endodontic education and training. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  2. Performance evaluation of traffic sensing and control devices : [technical summary].

    Science.gov (United States)

    2011-01-01

    High quality sensing and control systems are essential for providing efficient signalized arterial operations. INDOT operates over 2600 traffic signal controllers, approximately 2000 of which use some form of vehicle detection. The private sector con...

  3. Evaluating Performance: Strategic Alignment and Productivity

    Directory of Open Access Journals (Sweden)

    Armando Cuesta Santos

    2012-10-01

    Full Text Available Actually is reported as a world problem to enterprise label the rupture or inexistence of the connections between the strategy, human resource management and the organizational management indicators. In the Cuban enterprise practice this is manifest too. Surpass this rupture on the technical and organizer plan, is the principal objective of this research. In this paper is argument one methodological process that begins with the definition of labour competency to consider into post profiles, that conduced to surpass the actual rupture or opposition (versus, or not alignment or not integration, between the performance individual appraisal and the performance organizational strategic appraisal.

  4. Is Beauty in the Eyes of the Beholder? Aesthetic Quality versus Technical Skill in Movement Evaluation of Tai Chi.

    Science.gov (United States)

    Zamparo, Paola; Zorzi, Elena; Marcantoni, Sara; Cesari, Paola

    2015-01-01

    The aim of this study was to compare experts to naïve practitioners in rating the beauty and the technical quality of a Tai Chi sequence observed in video-clips (of high and middle level performances). Our hypothesis are: i) movement evaluation will correlate with the level of skill expressed in the kinematics of the observed action but ii) only experts will be able to unravel the technical component from the aesthetic component of the observed action. The judgments delivered indicate that both expert and non-expert observers are able to discern a good from a mediocre performance; however, as expected, only experts discriminate the technical from the aesthetic component of the action evaluated and do this independently of the level of skill shown by the model (high or middle level performances). Furthermore, the judgments delivered were strongly related to the kinematic variables measured in the observed model, indicating that observers rely on specific movement kinematics (e.g. movement amplitude, jerk and duration) for action evaluation. These results provide evidence of the complementary functional role of visual and motor action representation in movement evaluation and underline the role of expertise in judging the aesthetic quality of movements.

  5. Technical performance of percutaneous leads for spinal cord stimulation: a modeling study

    NARCIS (Netherlands)

    Manola, L.; Holsheimer, J.; Veltink, Petrus H.

    Objective. To compare the technical performance of different percutaneous lead types for spinal cord stimulation. Methods. Using the UT-SCS software (University of Twente's spinal cord stimulation), lead models having similar characteristics such as the 3487A PISCES-Quad (PQ), 3887 PISCES-Quad

  6. Effect of obstetric team training on team performance and medical technical skills: a randomised controlled trial

    NARCIS (Netherlands)

    Fransen, A. F.; van de Ven, J.; Merién, A. E. R.; de Wit-Zuurendonk, L. D.; Houterman, S.; Mol, B. W.; Oei, S. G.

    2012-01-01

    Please cite this paper as: Fransen A, van de Ven J, Merien A, de Wit-Zuurendonk L, Houterman S, Mol B, Oei S. Effect of obstetric team training on team performance and medical technical skills: a randomised controlled trial. BJOG 2012;119:13871393. Objective To determine whether obstetric team

  7. Mental Health and Academic Performance among Associate Degree Nursing Students at a Technical College

    Science.gov (United States)

    Kliminski, Kerri

    2017-01-01

    The purpose of this non-experimental cross-sectional quantitative study was to examine the relationship between mental health and academic performance among associate degree nursing (ADN) students at a Midwest technical college by identifying incidence of positive mental health, mental illness symptoms/distress, and mental illness; the…

  8. Performance of simulated flexible integrated gasification polygeneration facilities. Part A: A technical-energetic assessment

    NARCIS (Netherlands)

    Meerman, J.C.; Ramírez Ramírez, C.A.; Turkenburg, W.C.; Faaij, A.P.C.

    2011-01-01

    This article investigates technical possibilities and performances of flexible integrated gasification polygeneration (IG-PG) facilities equipped with CO2 capture for the near future. These facilities can produce electricity during peak hours, while switching to the production of chemicals during

  9. Technical Performance Measurement, Earned Value, and Risk Management: An Integrated Diagnostic Tool for Program Management

    National Research Council Canada - National Science Library

    Pisano, N

    2002-01-01

    ...(A)), is known as the Navy PEO(A) Technical Performance Measurement (TPM) System. A retrospective analysis was conducted on the T45TS Cockpit-21 program and real-time test implementations are being conducted on the Federal Aviation Administration's (FAA...

  10. Investigating Aerobic, Anaerobic Combine Technical Trainings' Effects on Performance in Tennis Players

    Science.gov (United States)

    Suna, Gürhan; Kumartasli, Mehmet

    2017-01-01

    The aim of this study is to investigate eight-week aerobic, anaerobic combine technical trainings' effects on developments of performance. 21 athletes of tennis proficiency students from Sports Sciences Department were joined to the study voluntarily. Participated in the research athletes' ages' mean was 22,2 ± 0,3 year, lengths' mean was 177,3 ±…

  11. Postsecondary Technical Education, Performance and Employee Development: A Survey of Employers.

    Science.gov (United States)

    Hill, Elizabeth T.

    1989-01-01

    Using a 1983 survey of Pennsylvania employees' hiring in seven occupations, this article reports differences in employers' observations concerning the effect of postsecondary technical education on employee performance, training periods, turnover, and worker development after hiring. Generally, employers gave more training to workers with a higher…

  12. Technical note: Rapid calculation of genomic evaluations for new animals.

    Science.gov (United States)

    Wiggans, G R; VanRaden, P M; Cooper, T A

    2015-03-01

    A method was developed to calculate preliminary genomic evaluations daily or weekly before the release of official monthly evaluations by processing only newly genotyped animals using estimates of single nucleotide polymorphism effects from the previous official evaluation. To minimize computing time, reliabilities and genomic inbreeding are not calculated, and fixed weights are used to combine genomic and traditional information. Correlations of preliminary and September official monthly evaluations for animals with genotypes that became usable after the extraction of genotypes for August 2014 evaluations were >0.99 for most Holstein traits. Correlations were lower for breeds with smaller population size. Earlier access to genomic evaluations benefits producers by enabling earlier culling decisions and genotyping laboratories by making workloads more uniform across the month. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  13. Temporal Changes in Technical and Physical Performances During a Small-Sided Game in Elite Youth Soccer Players

    OpenAIRE

    Moreira, Alexandre; Saldanha Aoki, Marcelo; Carling, Chris; Alan Rodrigues Lopes, Rafael; Felipe Schultz de Arruda, Ademir; Lima, Marcelo; Cesar Correa, Umberto; Bradley, Paul S

    2016-01-01

    Background There have been claims that small-sided games (SSG) may generate an appropriate environment to develop youth players’ technical performance associated to game-related problem solving. However, the temporal change in technical performance parameters of youth players during SSG is still unknown. Objectives The aim of this study was to examine temporal changes in technical and physical performances during a small-sided gam...

  14. Metrics for Offline Evaluation of Prognostic Performance

    Data.gov (United States)

    National Aeronautics and Space Administration — Prognostic performance evaluation has gained significant attention in the past few years.*Currently, prognostics concepts lack standard definitions and suffer from...

  15. Evaluation channel performance in multichannel environments

    NARCIS (Netherlands)

    Gensler, S.; Dekimpe, M.; Skiera, B.

    2007-01-01

    Evaluating channel performance is crucial for actively managing multiple sales channels, and requires understanding the customers' channel preferences. Two key components of channel performance are (i) the existing customers' intrinsic loyalty to a particular channel and (ii) the channel's ability

  16. Model Performance Evaluation and Scenario Analysis (MPESA)

    Science.gov (United States)

    Model Performance Evaluation and Scenario Analysis (MPESA) assesses the performance with which models predict time series data. The tool was developed Hydrological Simulation Program-Fortran (HSPF) and the Stormwater Management Model (SWMM)

  17. Performance evaluation of Louisiana superpave mixtures.

    Science.gov (United States)

    2008-12-01

    This report documents the performance of Louisiana Superpave mixtures through laboratory mechanistic tests, mixture : volumetric properties, gradation analysis, and early field performance. Thirty Superpave mixtures were evaluated in this : study. Fo...

  18. Performance evaluation of ventilation radiators

    International Nuclear Information System (INIS)

    Myhren, Jonn Are; Holmberg, Sture

    2013-01-01

    A ventilation radiator is a combined ventilation and heat emission unit currently of interest due to its potential for increasing energy efficiency in exhaust-ventilated buildings with warm water heating. This paper presents results of performance tests of several ventilation radiator models conducted under controlled laboratory conditions. The purpose of the study was to validate results achieved by Computational Fluid Dynamics (CFD) in an earlier study and identify possible improvements in the performance of such systems. The main focus was on heat transfer from internal convection fins, but comfort and health aspects related to ventilation rates and air temperatures were also considered. The general results from the CFD simulations were confirmed; the heat output of ventilation radiators may be improved by at least 20% without sacrificing ventilation efficiency or thermal comfort. Improved thermal efficiency of ventilation radiators allows a lower supply water temperature and energy savings both for heating up and distribution of warm water in heat pumps or district heating systems. A secondary benefit is that a high ventilation rate can be maintained all year around without risk for cold draught. -- Highlights: ► Low temperature heat emitters are currently of interest due to their potential for increasing energy efficiency. ► A ventilation radiator is a combined ventilation and heat emission unit which can be adapted to low temperature heating systems. ► We examine how ventilation radiators can be made to be more efficient in terms of energy consumption and thermal comfort. ► Current work focuses on heat transfer mechanisms and convection fin configuration of ventilation radiators

  19. Twelve tips for assessing surgical performance and use of technical assessment scales

    DEFF Research Database (Denmark)

    Strandbygaard, Jeanett; Scheele, Fedde; Sørensen, Jette Led

    2017-01-01

    Using validated assessment scales for technical competence can help structure and standardize assessment and feedback for both the trainee and the supervisor and thereby avoid bias and drive learning. Correct assessment of operative skills can establish learning curves and allow adequate monitoring....... However, the assessment of surgical performance is not an easy task, since it includes many proxy parameters, which are hard to measure. Although numerous technical assessment scales exist, both within laparoscopic and open surgery, the validity evidence is often sparse, and this can raise doubts about...

  20. Technical tips to perform safe and effective ultrasound guided steroid joint injections in children.

    Science.gov (United States)

    Parra, Dimitri A

    2015-01-01

    The aim of this article is to describe the technique used to perform ultrasound guided steroid joint injections in children in a group of joints that can be injected using ultrasound as the only image guidance modality. The technique is described and didactic figures are provided to illustrate key technical concepts. It is very important to be familiar with the sonographic appearance of the pediatric joints and the developing bone when performing ultrasound-guided joint injections in children.

  1. Learning curves for transfemoral transcatheter aortic valve replacement in the PARTNER-I trial: Technical performance.

    Science.gov (United States)

    Alli, Oluseun; Rihal, Charanjit S; Suri, Rakesh M; Greason, Kevin L; Waksman, Ron; Minha, Sa'ar; Torguson, Rebecca; Pichard, Augusto D; Mack, Michael; Svensson, Lars G; Rajeswaran, Jeevanantham; Lowry, Ashley M; Ehrlinger, John; Tuzcu, E Murat; Thourani, Vinod H; Makkar, Raj; Blackstone, Eugene H; Leon, Martin B; Holmes, David

    2016-01-01

    To assess technical performance learning curves of teams performing transfemoral transcatheter aortic valve replacement (TF-TAVR). TF-TAVR is a new procedure for treating severe aortic stenosis. The number of cases required for procedural efficiency is unknown. In the PARTNER-I trial, 1,521 patients underwent TF-TAVR from 4/2007-2/2012. Learning curve analysis of technical performance metrics was performed using institution-specific patient sequence number, interval between procedures, and institutional trial entry date. Learning curve characteristics were assessed using semi-parametric and parametric mixed-effects models. As patient sequence number increased, average procedure time decreased from 154 to 85 minutes (P Technical performance learning curves exist for TF-TAVR; procedural efficiency increased with experience, with concomitant decreases in radiation and contrast media exposure. The number of cases needed to achieve efficiency decreased progressively, with optimal procedural performance reached after approximately 25 cases for late-entering institutions. Knowledge and experience accumulated by early TF-TAVR institutions were disseminated, shortening the learning curve of late-entering institutions. Technological advances resulting from learning during the trial moved the field from initial conservative surgical cut-down to percutaneous access for most patients. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  2. The associations of selected technical parameters with discus throwing performance: a cross-sectional study.

    Science.gov (United States)

    Leigh, Steve; Yu, Bing

    2007-09-01

    The aim of this study was to identify associations between discus throwing performance and the technical parameters of: hip-shoulder and shoulder-arm separation, trunk forward-backward tilt, and throwing-arm elevation angles. Video data of male and female discus throwers' competitive performances were captured during major competitions. Real-life three-dimensional coordinates of 21 body landmarks, and the discus's centre, were obtained for 94 trials using the direct linear transformation procedure. Each technical parameter was reduced at six critical instants. The trend of each parameter across four standards of performance was analysed separately for both sexes. For the female throwers, hip-shoulder and shoulder-arm separations after the flight phase, as well as forward-backward trunk tilts at the beginning and end of the throwing procedure were associated with performance. For male throwers, only the hip-shoulder separation immediately before the flight phase was associated with performance. These findings suggest that the relationships between technical parameters and discus throwing performance are different for males and females. Our results suggest that elite female discus throwers are reliant on effective technique throughout the throwing procedure to achieve long distances, whereas male discus throwers may have a relatively homogeneous technique, and a dependence on physical strength to achieve their long throws.

  3. 76 FR 73010 - Technical Report Evaluating the 1999-2003 Head Impact Upgrade of FMVSS No. 201, Upper-Interior...

    Science.gov (United States)

    2011-11-28

    ...-0168] Technical Report Evaluating the 1999-2003 Head Impact Upgrade of FMVSS No. 201, Upper-Interior.... ACTION: Request for comments on technical report. SUMMARY: This notice announces NHTSA's publication of a Technical Report reviewing and evaluating its existing Safety Standard 201, Occupant Protection in Interior...

  4. Technical Evaluation Report 37: Assistive Software for Disabled Learners

    Directory of Open Access Journals (Sweden)

    Jon Baggaley

    2004-11-01

    Full Text Available Previous reports in this series (#32 and 36 have discussed online software features of value to disabled learners in distance education. The current report evaluates four specific assistive software products with useful features for visually and hearing impaired learners: ATutor, ACollab, Natural Voice, and Just Vanilla. The evaluative criteria discussed include the purpose, uses, costs, and features of each software product, all considered primarily from the accessibility perspective.

  5. IAEA technical co-operation with least developed Member States. Special evaluation

    International Nuclear Information System (INIS)

    1993-01-01

    The main purposes of this evaluation were to: Review the overall situation with regard to IAEA technical co-operation with least developed Member States, including specific conditions in nuclear-related activities prevailing in these countries, approaches and practices used by the IAEA in providing assistance to LDCs, and the main results of the co-operation in question. Identify any adjustments to technical co-operation with LDC Member States that may strengthen this activity

  6. Factors associated to performance efficacy of technical-tactical actions in volleyball

    Directory of Open Access Journals (Sweden)

    William das Neves Salles

    2017-05-01

    Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2017v19n1p74   The aim of the study was to investigate the factors associated to performance efficacy of technical-tactical actions in volleyball. Based on the protocol of the Instrument for Technical and Tactical Performance Assessment in Volleyball (IAD-VB, 44.025 match actions performed by male and female athletes from u-15, u-16 and u-17 finalist teams of the 2010 Santa Catarina Volleyball Championship in Brazil were observed. Data were analyzed on SPPS 21 software using the logistic regression technique, adopting 5% significance level for the interpretation of results. Adjusted model explained 51.40% efficacy variance, and the factors associated with this variable were decision making, adjustment, efficiency, and competition level.

  7. Technical Performance Analysis of Iran Premier League Soccer Players in 2012-2013 Season

    Directory of Open Access Journals (Sweden)

    Javani Mohsen

    2015-10-01

    Full Text Available Background and purpose of study : analysis of IRAN premier league soccer players’ technical performance in season 2012-2013, using a computerized match analysis system (Borhan Mobin Development Management Co, IRAN. Material and methods: in this study, data were obtained from 120 players, who performed in competitions 90 minutes. The players were classified into 3 positional roles: defenders, midfielders and forwards. Technical performance variables analysis included: total passes, total successful passes, pass accuracy, total shots; total shots to target, shot accuracy, ball interception and ball losses. The data were statistically analyzed by one-way ANOVA, Kruskal-Wallis, Mann-Whitney U and Tukey post hoc test. Results : The findings of this study showed that players performed about 45 passes per competition. Midfielders and defenders had significantly higher number of passes than forwards. Pass accuracy was about 67% and there were no significant differences between positional roles. Also, the players performed about 0.8 shots per competition, forwards and midfielders had significantly higher number of shots than defenders. Shot accuracy was about 31%; midfielders and forwards had significantly higher shot accuracy than defenders. Forwards showed significantly lower ball interception and higher ball losses than other positions. Conclusion : The result of this study showed that there were significant differences between some technical actions in positional roles. Therefore, coaches can use this information for individualization of training according to playing positions and for optimization of training in the amateur game.

  8. Technical and patient performance using a virtual reality-integrated telerehabilitation system: preliminary finding.

    Science.gov (United States)

    Deutsch, Judith E; Lewis, Jeffrey A; Burdea, Grigore

    2007-03-01

    Telerehabilitation is the provision of rehabilitation services at a distance by a therapist at a remote location. Integration with virtual reality (VR) is a relatively new addition to this field. This paper describes the technical and patient performance of a telerehabilitation application the remote console (ReCon) that is integrated with a VR system. The VR system consists of the Rutgers Ankle prototype robot, a local PC which is connected with a remote PC connected over the Internet. Six individuals in the chronic phase poststroke participated in a four week training program. They used the robot to interact with two VR simulations, while the therapist was in the same room during the first three weeks or in another room during the fourth week. Technical and patient performance was assessed in the transition from the third to the fourth week of training. Technical performance of the system was assessed based on bandwidth and lag of message transmission, which were found to be suitable for clinic-to-clinic communication. Patient performance (in terms of accuracy of ankle movement, exercise duration and training efficiency, mechanical power of the ankle, and number of repetitions) did not decrease during telerehabilitation in the fourth week. These preliminary findings over a short telerehabilitation intervention support the feasibility of remote monitoring of VR-based telerehabilitation without adverse effects on patient performance.

  9. Evaluation of technical design of advanced information display(III)

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Woo Chang; Jung, Sung Hae; Park, Joon Yong; Kim, Nam Cheol [Kumoh National Institute of Technology, Gumi (Korea, Republic of); Park, Soon Hyuk [DNT Inc., Daejeon (Korea, Republic of)

    2005-02-15

    As the computer technology is highly developed, the mental model of computer users including NPP operators has been changed from analogue display type-based stereotype to digitalized one. Therefore, it is necessary and confident to consider the issues to evaluate system suitability of advanced information display on visual display terminal. This document is intended for providing an updated and expanded set of user-interface guidelines that meet the needs of designing digitalized information display by finding the generic guidelines involving information display design issues, and the relationship among the guidelines. The design issues and resolutions from the finding may provide the cues for the designers and evaluators of the specific man machine interfaces of digitalized devices. The Design Review Supporting System for Advanced Information Display(DReSS-AID) was developed for the practical usage of evaluators-in-field, which was implemented with Hangul version guidelines.

  10. Exploring the use of internal and externalcontrols for assessing microarray technical performance

    Directory of Open Access Journals (Sweden)

    Game Laurence

    2010-12-01

    Full Text Available Abstract Background The maturing of gene expression microarray technology and interest in the use of microarray-based applications for clinical and diagnostic applications calls for quantitative measures of quality. This manuscript presents a retrospective study characterizing several approaches to assess technical performance of microarray data measured on the Affymetrix GeneChip platform, including whole-array metrics and information from a standard mixture of external spike-in and endogenous internal controls. Spike-in controls were found to carry the same information about technical performance as whole-array metrics and endogenous "housekeeping" genes. These results support the use of spike-in controls as general tools for performance assessment across time, experimenters and array batches, suggesting that they have potential for comparison of microarray data generated across species using different technologies. Results A layered PCA modeling methodology that uses data from a number of classes of controls (spike-in hybridization, spike-in polyA+, internal RNA degradation, endogenous or "housekeeping genes" was used for the assessment of microarray data quality. The controls provide information on multiple stages of the experimental protocol (e.g., hybridization, RNA amplification. External spike-in, hybridization and RNA labeling controls provide information related to both assay and hybridization performance whereas internal endogenous controls provide quality information on the biological sample. We find that the variance of the data generated from the external and internal controls carries critical information about technical performance; the PCA dissection of this variance is consistent with whole-array quality assessment based on a number of quality assurance/quality control (QA/QC metrics. Conclusions These results provide support for the use of both external and internal RNA control data to assess the technical quality of microarray

  11. Technical and economic evaluation of advanced air cargo system concepts

    Science.gov (United States)

    Whitehead, A. H., Jr.

    1977-01-01

    The paper reviews NASA air cargo market studies, reports on NASA and NASA-sponsored studies of advanced freighter concepts, and identifies the opportunities for the application of advanced technology. The air cargo market is studied to evaluate the timing for, and the potential market response to, advanced technology aircraft. The degree of elasticity in future air freight markets is also being investigated, since the demand for a new aircraft is most favorable in a price-sensitive environment. Aircraft design studies are considered with attention to mission and design requirements, incorporation of advanced technologies in transport aircraft, new cargo aircraft concepts, advanced freighter evaluation, and civil-military design commonality.

  12. Evaluation of the Cosmetology Program at Caldwell Community College and Technical Institute--Fall, 1981.

    Science.gov (United States)

    Pipes, V. David

    In fall 1981, the cosmetology program at Caldwell Community College and Technical Institute (CCC&TI) was evaluated as part of a process to create a model for the periodic evaluation of all occupational programs at the school. In addition to collecting information for planning and program improvement, the study sought to assess the achievement of…

  13. Evaluation of the Radiography Program at Caldwell Community College and Technical Institute--Summer, 1982.

    Science.gov (United States)

    Pipes, V. David

    As part of a periodic evaluation of the occupational programs at Caldwell Community College and Technical Institute (CCC&TI), a study of the radiography program was conducted to collect information to facilitate planning, aid in program improvement, and meet accountability demands. The specific objectives of the program evaluation were to…

  14. Social-technical design for evaluation of student's behaviour and expectations

    DEFF Research Database (Denmark)

    John, Claudette; Kampf, Constance Elizabeth; Briollet, Alexandra

    2015-01-01

    This paper focuses on the usability of new technologies and real-time socio-technical features for evaluation issues in student’s courses. The evaluation of content and forms of knowledge taught within a course are directly linked to behaviour, perception and expectations from the student’s side...

  15. 48 CFR 1403.101-70 - Technical evaluators and advisors.

    Science.gov (United States)

    2010-10-01

    ..., including stocks and bonds, in a firm that submits, or is expected to submit, an offer in response to the...). Therefore, when an individual is appointed as an evaluator or advisor, he/she must sign and return to the CO... interest in profit sharing or stock bonus plans arising out of past employment by an actual or potential...

  16. Caffeine. Courseware Evaluation for Vocational and Technical Education.

    Science.gov (United States)

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This courseware evaluation rates the "Caffeine" program developed by Lane Community College and sold by the Oregon Department of Education. (The program--not included in this document--is part of a computer-assisted instruction project with nursing applications.) Part A describes "Caffeine" in terms of topics (food and…

  17. Technical Note Evaluation of extent of water adulteration of milk ...

    African Journals Online (AJOL)

    A study was conducted to evaluate the extent of water adulteration of milk produced and marketed in Morogoro municipality in Tanzania. A total of 90 milk samples were collected from institutional, private and smallholder farms and milk vendors, The samples were analysed for lactometer reading (LR), butterfat (BF), ...

  18. Reading Vernier Calipers. Courseware Evaluation for Vocational and Technical Education.

    Science.gov (United States)

    Goldstine, James; And Others

    This courseware evaluation rates the Reading Vernier Calipers program developed by EMC Publishing Company. (The program--not contained in this document--uses high resolution graphics to illustrate the micrometer and describe its components, functions, and practical applications.) Part A describes the program in terms of subject area (technical…

  19. Inflammation. Courseware Evaluation for Vocational and Technical Education.

    Science.gov (United States)

    Yarbrough, Stephen

    This courseware evaluation rates the "Inflammation" program developed by Lane Community College in Eugene, Oregon. (This program--not contained in this document--introduces students to the possible causes, signs, and protective benefits of inflammation.) Part A describes the program in terms of subject area (allied health, nursing), and…

  20. Personal Consumerism. Courseware Evaluation for Vocational and Technical Education.

    Science.gov (United States)

    Smizer, Janet; And Others

    This courseware evaluation rates the "Personal Consumerism" program developed by Aquarius People Materials. (The eight-program series--not contained in this document--includes understanding labels, consumer help, consumer fraud, consumer law, comparative shopping, consumerism and you, reading an advertisement, and tips on buying a used…

  1. Evaluation of Fly Ash Quality Control Tools : Technical Summary

    Science.gov (United States)

    2010-06-01

    Many entities currently use fl y ash in portland cement concrete (PCC) pavements and structures. Although : the body of knowledge is great concerning the use of fl y ash, several projects per year are subject to poor : performance where fl y ash is n...

  2. Evaluation of technical design of advanced information display(II)

    International Nuclear Information System (INIS)

    Cha, Woo Chang; Kang, Young Ju; Ji, Jung Hun; Jang, Sung Pil; Jung, Sung Hae; Park, Hyun Jin

    2004-02-01

    As the computer technology is highly developed, the mental model of computer users including NPP operators has been changed from analogue display type-based stereotype to digitalized one. Therefore, it is necessary and confident to consider the issues to evaluate system suitability of advanced information display on visual display terminal such as CRT. This document is intended for providing an updated and expanded set of user-interface guidelines that meet the needs of designing information display on CRT by finding the generic guidelines involving information display design issues, and the relationship among the guidelines. The design issues and resolutions from the finding may provide the cues for the designers and evaluators of the specific man machine interfaces of digitalized devices

  3. Evaluation of technical design of advanced information display(II)

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Woo Chang; Kang, Young Ju; Ji, Jung Hun; Jang, Sung Pil; Jung, Sung Hae; Park, Hyun Jin [Kumoh National Univ., Gumi (Korea, Republic of)

    2004-02-15

    As the computer technology is highly developed, the mental model of computer users including NPP operators has been changed from analogue display type-based stereotype to digitalized one. Therefore, it is necessary and confident to consider the issues to evaluate system suitability of advanced information display on visual display terminal such as CRT. This document is intended for providing an updated and expanded set of user-interface guidelines that meet the needs of designing information display on CRT by finding the generic guidelines involving information display design issues, and the relationship among the guidelines. The design issues and resolutions from the finding may provide the cues for the designers and evaluators of the specific man machine interfaces of digitalized devices.

  4. Technical Details on Beyond Design Basis Event Pilot Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2013-01-01

    The primary focus of the BDBE pilot project was the review of BDBE analysis and mitigation features at four DOE nuclear facilities representing a range of DOE sites, nuclear facility types/activities, and responsible program offices. The pilots looked at (1) how beyond design basis accidents were evaluated and documented in the facility Documented Safety Analysis, (2) potential BDBE vulnerabilities and margins to failure of facility safety features as obtained from general area and specific system walkdowns and design documents reviews, and (3) preparations made in facility and site emergency management programs to respond to severe accidents. It also evaluated whether draft BDBE guidance on safety analysis and emergency management could be used to improve the analysis of and preparations for mitigating severe and beyond design basis accidents. The details of these activities are organized in this report as described below.

  5. Habitat Evaluation Procedures (HEP) Report; Beaver Lake, Technical Report 2005.

    Energy Technology Data Exchange (ETDEWEB)

    Entz, Ray

    2005-05-01

    On August 14, 2003, the Habitat Evaluation Procedure (HEP) was used to determine baseline habitat suitability on the Beaver Lake property, an acquisition completed by the Kalispel Tribe of Indians in November 2002. Evaluation species and appropriate models include bald eagle, black-capped chickadee, Canada goose, mallard, muskrat, yellow warbler, and white-tailed deer. Habitat Suitability Index (HSI) values were visually estimated and agreed upon by all HEP team members. The Beaver Lake Project provides a total of 232.26 Habitat Units (HUs) for the species evaluated. Conifer forest habitat provides 136.58 HUs for bald eagle, black-capped chickadee, mallard, and white-tailed deer. Forested wetland habitat provides 20.02 HUs for bald eagle, black-caped chickadee, mallard, and white-tailed deer. Scrub-shrub wetland habitat provides 7.67 HUs for mallard, yellow warbler, and white-tailed deer. Grassland meadow provides 22.69 HUs for Canada goose and mallard. Emergent wetlands provide 35.04 HUs for Canada goose, mallard, and muskrat. Open water provided 10.26 HUs for Canada goose, mallard, and muskrat. The objective of using HEP at the Beaver Lake Project and other protected properties is to document the quality and quantity of available habitat for selected wildlife species. In this way, HEP provides information on the relative value of the same area at future points in time so that the effect of management activities on wildlife habitat can be quantified. When combined with other tools, the baseline HEP will be used to determine the most effective on-site management, restoration, and enhancement actions to increase habitat suitability for targeted species. The same process will be replicated every five years to quantitatively evaluate the effectiveness of management strategies in improving and maintaining habitat conditions while providing additional crediting to BPA for enhanced habitat values.

  6. Habitat Evaluation Procedures (HEP) Report; Gamblin Lake, Technical Report 2005.

    Energy Technology Data Exchange (ETDEWEB)

    Entz, Ray

    2005-05-01

    On August 12, 2003, the Habitat Evaluation Procedure (HEP) was used to determine baseline habitat suitability on the Gamblin Lake property, an acquisition completed by the Kalispel Tribe of Indians in December 2002. Evaluation species and appropriate models include bald eagle, black-capped chickadee, mallard, muskrat, and white-tailed deer. Habitat Suitability Index (HSI) values were visually estimated and agreed upon by all HEP team members. The Gamblin Lake Project provides a total of 273.28 Habitat Units (HUs) for the species evaluated. Conifer forest habitat provides 127.92 HUs for bald eagle, black-capped chickadee, mallard, and white-tailed deer. Forested wetland habitat provides 21.06 HUs for bald eagle, black-caped chickadee, mallard, and white-tailed deer. Wet meadow provides 78.05 HUs for Canada goose and mallard. Emergent wetland habitat provides 46.25 HUs for mallard, muskrat, and Canada goose. The objective of using HEP at the Gamblin Lake Project and other protected properties is to document the quality and quantity of available habitat for selected wildlife species. In this way, HEP provides information on the relative value of the same area at future points in time so that the effect of management activities on wildlife habitat can be quantified. When combined with other tools, the baseline HEP will be used to determine the most effective on-site management, restoration, and enhancement actions to increase habitat suitability for targeted species. The same process will be replicated every five years to quantitatively evaluate the effectiveness of management strategies in improving and maintaining habitat conditions while providing additional crediting to BPA for enhanced habitat values.

  7. Habitat Evaluation Procedures (HEP) Report; Carey Creek, Technical Report 2005.

    Energy Technology Data Exchange (ETDEWEB)

    Entz, Ray

    2005-05-01

    In August 2002, the Habitat Evaluation Procedure (HEP) was used to determine baseline habitat suitability on the Carey Creek property, an acquisition completed by the Kalispel Tribe of Indians in December 2001. Evaluation species and appropriate models include bald eagle, black-capped chickadee, Canada goose, mallard, yellow warbler, and white-tailed deer. Habitat Suitability Index (HSI) values were visually estimated and agreed upon by all HEP team members. The Carey Creek Project provides a total of 172.95 Habitat Units (HUs) for the species evaluated. Conifer forest habitat provides 4.91 HUs for bald eagle, black-capped chickadee, and white-tailed deer. Forested wetlands provide 52.68 HUs for bald eagle, black-capped chickadee, mallard, and white-tailed deer. Scrub-shrub wetlands provide 2.82 HUs for mallard, yellow warbler and white-tailed deer. Wet meadow and grassland meadow provide 98.13 HUs for mallard and Canada goose. Emergent wetlands provide 11.53 HUs for mallard, muskrat, and Canada goose. Open water provides 2.88 HUs for Canada goose, mallard, and muskrat. The objective of using HEP at the Carey Creek Project and other protected properties is to document the quality and quantity of available habitat for selected wildlife species. In this way, HEP provides information on the relative value of the same area at future points in time so that the effect of management activities on wildlife habitat can be quantified. When combined with other tools, the baseline HEP will be used to determine the most effective on-site management, restoration, and enhancement actions to increase habitat suitability for targeted species. The same process will be replicated every five years to quantitatively evaluate the effectiveness of management strategies in improving and maintaining habitat conditions while providing additional crediting to BPA for enhanced habitat values.

  8. Evaluation of the technical condition of medium-sized boilers

    Directory of Open Access Journals (Sweden)

    Lošák Pavel

    2018-01-01

    Full Text Available The recent trend in the steam and electricity production has been both to increase the efficiency of the facility and to keep tightening legislation concerning emission limits. The lifetime of energy equipment is greatly influenced by the operating temperature, pressure and operating characteristics. The new conditions lead the operator to more often changes of these parameters, which has negative influence to the facility in terms of service life. Precise knowledge of the facility being operated and the ability to predict the residual life of its key parts in time is therefore necessary. A new methodology for determining the residual life and evaluating problematic situations of medium size boilers was developed at Brno University of Technology. Its approaches and advantages will be presented in this paper. The methodology provides the user with approaches for the lifetime evaluation of an equipment as a whole, based on detailed knowledge of the equipment being investigated and the ongoing damage. Additionally, if the equipment is continuously evaluated, it is possible to extend the inspection interval or to achieve a significantly higher lifetime of the entire equipment, thereby reducing the economic cost. If defined criteria are met, the methodology also allows inclusion of FEM and CFD simulations for achieving higher relevance of the results.

  9. Application of objective clinical human reliability analysis (OCHRA) in assessment of technical performance in laparoscopic rectal cancer surgery.

    Science.gov (United States)

    Foster, J D; Miskovic, D; Allison, A S; Conti, J A; Ockrim, J; Cooper, E J; Hanna, G B; Francis, N K

    2016-06-01

    Laparoscopic rectal resection is technically challenging, with outcomes dependent upon technical performance. No robust objective assessment tool exists for laparoscopic rectal resection surgery. This study aimed to investigate the application of the objective clinical human reliability analysis (OCHRA) technique for assessing technical performance of laparoscopic rectal surgery and explore the validity and reliability of this technique. Laparoscopic rectal cancer resection operations were described in the format of a hierarchical task analysis. Potential technical errors were defined. The OCHRA technique was used to identify technical errors enacted in videos of twenty consecutive laparoscopic rectal cancer resection operations from a single site. The procedural task, spatial location, and circumstances of all identified errors were logged. Clinical validity was assessed through correlation with clinical outcomes; reliability was assessed by test-retest. A total of 335 execution errors identified, with a median 15 per operation. More errors were observed during pelvic tasks compared with abdominal tasks (p technical performance of laparoscopic rectal surgery.

  10. The estimation of the correlation between technical-tactical and special physical performance in qualified women volleyball players

    OpenAIRE

    Wnorowski, Krzysztof; Smulskij, Walerij

    2007-01-01

    The article deals with the correlation between technical-tactical and special physical performance in qualified women volleyball players. The experts estimation of technical-tactical performance and seven indices of special physical capacities of athletes were correlated. Most correlation (r = 0,68; p

  11. Technical and tactical performance indicators based on the outcome of the set in the school volleyball

    Directory of Open Access Journals (Sweden)

    Yago Pessoa da Costa

    2017-09-01

    Full Text Available The aim of the study was to identify and compare the technical and tactical performance indicators based on the outcome of the set in the school female volleyball. The study included 110 athletes, aged between 12 and 14 years, belonging to 11 teams. Fifty-eight sets of 28 games were filmed and 7194 actions, 2830 serves, 2157 serve reception, 1358 passes and 1299 attacks were analyzed. Afterwards, the game sets were divided into winners and losers sets. Teams that won the sets had advantage at the serve reception, set and attack on error and excellence/point criteria (p< 0.05 and of serve, set and attack (p< 0.001. In conclusion, the winner’s sets were those with a better technical-tactical performance quantitatively and qualitatively.

  12. Technical and economical evaluation of tape drip and drip line irrigation systems in a strawberry greenhouse

    Directory of Open Access Journals (Sweden)

    Soghra HOSSEINIAN

    2016-04-01

    Full Text Available This study was done in a strawberry greenhouse to examine the technical and the economical evaluation of two drip irrigation systems including the tape and the drip line in the northern part of Iran. The result showed that all of the technical indices with tape were higher than drip line, and due to statistical analysis reveal a significant difference (P < 0.05. Yield and water productivity (WP with tape were higher than drip line (P < 0.05. Benefit per drop (BPD and net benefit per drop (NBPD with tape were higher than drip line. Net present value, internal rate of capital return and benefit to cost ratio in drip line were higher than tape. In general, regarding technical evaluation tape was better than drip line, besides according to the economical evaluation the drip ­lines were better than tape.

  13. Technical and economic evaluation of nuclear seawater desalination systems

    International Nuclear Information System (INIS)

    Grechko, A.G.; Romenkov, A.A.; Shishkin, V.A.

    1998-01-01

    The IAEA Cogeneration/Desalination Cost Model spreadsheets were used for the economic evaluation of sea water desalination plants coupled with small and medium size nuclear reactors developed in RDIPE. The results of calculations have shown that the cost of potable water is equal to or even below 1$/m 3 . This is very close to similar indices of the best fossil driven desalination plants. For remote and difficult-to-access regions, where the transportation share contributes significantly to the product water cost at fossil plants, the nuclear power sources of these reactor types are cost-efficient and can successfully compete with fossil power sources. (author)

  14. Estimate of Technical Potential for Minimum Efficiency Performance Standards in 13 Major World Economies

    Energy Technology Data Exchange (ETDEWEB)

    Letschert, Virginie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Desroches, Louis-Benoit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ke, Jing [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McNeil, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-07-01

    As part of the ongoing effort to estimate the foreseeable impacts of aggressive minimum efficiency performance standards (MEPS) programs in the world’s major economies, Lawrence Berkeley National Laboratory (LBNL) has developed a scenario to analyze the technical potential of MEPS in 13 major economies around the world1 . The “best available technology” (BAT) scenario seeks to determine the maximum potential savings that would result from diffusion of the most efficient available technologies in these major economies.

  15. Technical activity profile and influence of body anthropometry on playing performance in female elite team handball.

    Science.gov (United States)

    Michalsik, Lars B; Aagaard, Per; Madsen, Klavs

    2015-04-01

    To determine the physical demands placed on female elite team handball (TH) players in relation to playing position and body anthropometry, female elite TH primarily field players were monitored during match-play using video recording and subsequent computerized technical match analysis during 5 regular tournament match seasons. Technical match activities were distributed in 6 major types of playing actions (shots, breakthroughs, fast breaks, technical errors, defensive errors, and tackles) and further divided into various subcategories (e.g., type of shot, hard or light tackles, claspings, screenings, and blockings). Furthermore, anthropometric measurements were performed. Each player had 28.3 ± 11.0 (group means ± SD) high-intense playing actions per match with a total effective playing time of 50.70 ± 5.83 minutes. On average, each player made 2.8 ± 2.6 fast breaks, gave 7.9 ± 14.4 screenings, received 14.6 ± 9.2 tackles in total, and performed 7.7 ± 3.7 shots while in offense, along with 3.5 ± 3.8 blockings, 1.9 ± 2.7 claspings, and 6.2 ± 3.8 hard tackles in defense. Mean body height, body mass, and age in the Danish Premier Female Team Handball League were 175.4 ± 6.1 cm, 69.5 ± 6.5 kg, and 25.4 ± 3.7 years, respectively. Wing players were lighter (63.5 ± 4.8 kg, p games intermittently perform a high number of short-term, high-intense technical playing actions making modern female elite TH a physically demanding team sport. No sign of technical fatigue were observed, since the amount of intense technical playing actions remained unchanged in the second half. Marked positional differences in the physical demands were demonstrated, with wing players performing more fast breaks and less physical confrontations than BP and PV. Body anthropometry differed substantially between different playing positions. Consequently, this should lead to an increase in physical training in modern female elite TH directed at specific positions and individual physical

  16. Technical performance of colonoscopy: the key role of sedation/analgesia and other quality indicators.

    Science.gov (United States)

    Radaelli, Franco; Meucci, Gianmichele; Sgroi, Giusy; Minoli, Giorgio

    2008-05-01

    It is essential to identify the factors in clinical practice that influence the technical performance of colonoscopy as a basis for quality improvement programs. To assess the factors linked to two key indicators of colonoscopy performance, i.e., cecal intubation and polyp diagnosis. Consecutives colonoscopies performed over a 2-wk period in 278 unselected practice sites throughout Italy were prospectively evaluated. A multivariate model was developed to identify determinants of the performance indicators of colonoscopy. In total, 12,835 patients (mean age 60.5 yr, standard deviation [SD] 15.1, 53% men) were studied. Sedation and/or analgesia was administered in 55.3% of procedures: 28.8% of patients received intravenous (IV) benzodiazepines, 15.4% received benzodiazepines in combination with narcotics, 3.1% received propofol, and 7.5% received other sedation regimens. Overall, cecal intubation was achieved in 80.7% of procedures, and the polyp detection rate was 27.3%. Multivariate analysis showed that the strongest predictors of cecal intubation were the quality of bowel preparation (inadequate vs excellent: odds ratio [OR] 0.013, 95% confidence interval [CI] 0.009-0.018; fair vs excellent: OR 0.246, 95% CI 0.209-0.290; and good vs excellent: OR 0.586, 95% CI 0.514-0.667) and the use of sedation (IV benzodiazepines vs no sedation: OR 1.460, 95% CI 1.282-1.663; IV benzodiazepines and narcotics vs no sedation: OR 2.128, 95% CI 1.776-2.565; and propofol vs no sedation: OR 2.355, 95% CI 1.590-3.488). The colonoscopy setting (workload and organizational complexity of the center) and the endoscopist colonoscopy volume were other factors independently correlated with completion of the procedure. Detection of polyps partially depended on the quality of bowel cleansing (inadequate vs excellent: OR 0.511, 95% CI 0.404-0.647) and use of sedation (OR 1.172, 95% CI 1.074-1.286). In usual clinical practice, the use of sedation/analgesia, the colon-cleansing quality, the

  17. Analysis of Running and Technical Performance in Substitute Players in International Male Rugby Union Competition.

    Science.gov (United States)

    Lacome, Mathieu; Piscione, Julien; Hager, Jean-Philippe; Carling, Christopher

    2016-09-01

    To investigate the patterns and performance of substitutions in 18 international 15-a-side men's rugby union matches. A semiautomatic computerized time-motion system compiled 750 performance observations for 375 players (422 forwards, 328 backs). Running and technical-performance measures included total distance run, high-intensity running (>18.0 km/h), number of individual ball possessions and passes, percentage of passes completed, and number of attempted and percentage of successful tackles. A total of 184 substitutions (85.2%) were attributed to tactical and 32 (14.8%) to injury purposes respectively. The mean period for non-injury-purpose substitutions in backs (17.7%) occurred between 70 and 75 min, while forward substitutions peaked equally between 50-55 and 60-65 min (16.4%). Substitutes generally demonstrated improved running performance compared with both starter players who completed games and players whom they replaced (small differences, ES -0.2 to 0.5) in both forwards and backs over their entire time played. There was also a trend for better running performance in forward and back substitutes over their first 10 min of play compared with the final 10 min for replaced players (small to moderate differences, ES 0.3-0.6). Finally, running performance in both forward and back substitutes was generally lower (ES -0.1 to 0.3, unclear or small differences) over their entire 2nd-half time played compared with their first 10 min of play. The impact of substitutes on technical performance was generally considered unclear. This information provides practitioners with practical data relating to the physical and technical contributions of substitutions that subsequently could enable optimization of their impact on match play.

  18. Performance of operating and advanced light water reactor designs. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-10-01

    Nuclear power can provide security of energy supply, stable energy costs, and can contribute to greenhouse gas reduction. To fully realize these benefits, a continued and strong focus must be maintained on means for assuring the economic competitiveness of nuclear power relative to alternatives. Over the past several years, considerable improvements have been achieved in nuclear plant performance. Worldwide, the average energy availability factor has increased from 66 per cent in 1980 to 81 per cent in 1999, with some utilities achieving significantly higher values. This is being achieved through integrated programmes including personnel training and quality assurance, improvements in plant system and component design and plant operation, by various means to reduce outage duration for maintenance and refuelling and other scheduled shutdowns, and by reducing the number of forced outages. Application of technical means for achieving high performance of nuclear power plants is an important element for assuring their economic competitiveness. For the current plants, proper management includes development and application of better technologies for inspection, maintenance and repair. For future plants, the opportunity exists during the design phase to incorporate design features and technologies for achieving high performance. This IAEA Technical Committee meeting (TCM) provided a forum for information exchange on design features and technologies incorporated into LWR plants commissioned within the last 15-20 years, and into evolutionary LWR designs still under development, for achieving performance improvements with due regard to stringent safety requirements and objectives. It also addressed on-going technology development expected to achieve further improvements and/or significant cost reductions. The TCM was attended by 32 participants from 14 Member States: Argentina, Bulgaria, Czech Republic, Finland, France, Germany, Hungary, Japan, Republic of Korea, Mexico

  19. The perceived fairness of performance evaluations

    NARCIS (Netherlands)

    F.G.H. Hartmann (Frank)

    2012-01-01

    textabstractWhen it comes to procedural justice, Management Accounting and Human Resources functions have to get closer to create systems of performance evaluation that are perceived as fair – and that also take uncertainty into consideration.

  20. Seasat performance evaluation - The first two steps

    Science.gov (United States)

    Lame, D. B.; Born, G. H.; Dunne, J. A.; Spear, A. J.; Yamarone, C. A.

    1980-01-01

    Seasat, the satellite dedicated to the study of the oceans using microwave sensors, collected a data set containing information on sea surface winds, sea surface temperatures, wave heights, wave directions, internal waves, currents, tides, the marine geoid, and atmospheric water content. The first two steps of the performance evaluation of the satellite have been completed: (1) the engineering assessment and (2) the sensor evaluation. The results are encouraging for the performance of the instruments and the first level of data processing algorithms.

  1. 13 CFR 304.4 - Performance evaluations.

    Science.gov (United States)

    2010-01-01

    ... Section 304.4 Business Credit and Assistance ECONOMIC DEVELOPMENT ADMINISTRATION, DEPARTMENT OF COMMERCE ECONOMIC DEVELOPMENT DISTRICTS § 304.4 Performance evaluations. (a) EDA shall evaluate the management...: (1) The continuing Regional eligibility of the District, as set forth in § 304.1; (2) The management...

  2. Building Leadership Talent through Performance Evaluation

    Science.gov (United States)

    Clifford, Matthew

    2015-01-01

    Most states and districts scramble to provide professional development to support principals, but "principal evaluation" is often lost amid competing priorities. Evaluation is an important method for supporting principal growth, communicating performance expectations to principals, and improving leadership practice. It provides leaders…

  3. Performance-Based Evaluation and School Librarians

    Science.gov (United States)

    Church, Audrey P.

    2015-01-01

    Evaluation of instructional personnel is standard procedure in our Pre-K-12 public schools, and its purpose is to document educator effectiveness. With Race to the Top and No Child Left Behind waivers, states are required to implement performance-based evaluations that demonstrate student academic progress. This three-year study describes the…

  4. Implementation and evaluation of information desk services provided by library technical assistants.

    Science.gov (United States)

    Graves, K J

    1998-10-01

    Changes in the role of information services librarians and in the health care environment have required a rethinking of the provision of reference services at the University of Illinois at Chicago Library of the Health Sciences. This is a report of a new service offered after that analysis. An information desk staffed by twenty-five library technical assistants was established. Details of staff training, scheduling, and data gathering for this new service are provided. After eight months of operation, an evaluation of services provided by the Information Desk was conducted. A combination of evaluation methodologies, both quantitative and qualitative, has been used to determine overall staff performance. Results from analysis of service statistics, structured observations of real-time services operations, and questionnaires distributed to information services librarians and to patrons are presented. The findings from this study are discussed in terms of comparison with similar studies in other libraries and identification of future research studies. The results confirm the value of the Information Desk and support the decision to continue this service model.

  5. TECHNICAL ASPECTS REGARDING THE IMPROVEMENT OF AEROSPACE AIR DEFENSE VECTORS’ PERFORMANCES

    Directory of Open Access Journals (Sweden)

    Vasile SANDRU

    2013-01-01

    Full Text Available Confronted with the spectacular evolution of the aircraft and other aerial vehicles, the systems destined to combat them, especially Surface-to-Air Missile Systems (SAMS, went through an accelerated loss of their performance. The financial crisis has forced an extension of the system operation even if the system is outdated. Therefore, a new modernized version has been designed. Many times, it is better to improve an existing system than to buy a new one. This article describes the diversity of SAMS’s challenges, involving a decrease in time regarding their number. The types of challenges can be divided in two categories: technical and institutional ones. The technical challenges can be also divided in two categories: deterioration of material and obsolescence. The classes of material that present interest for us are aerodynamic vector structure, propulsion, and special systems. From an institutional point of view, the main problems are: cost versus performance and cost versus the remaining lifetime (technical resource of the air defense system. The article finishes with conclusions that support the possibility and necessity of a SAMS upgrade, given the change of the threats characteristics.

  6. Advanced transport systems analysis, modeling, and evaluation of performances

    CERN Document Server

    Janić, Milan

    2014-01-01

    This book provides a systematic analysis, modeling and evaluation of the performance of advanced transport systems. It offers an innovative approach by presenting a multidimensional examination of the performance of advanced transport systems and transport modes, useful for both theoretical and practical purposes. Advanced transport systems for the twenty-first century are characterized by the superiority of one or several of their infrastructural, technical/technological, operational, economic, environmental, social, and policy performances as compared to their conventional counterparts. The advanced transport systems considered include: Bus Rapid Transit (BRT) and Personal Rapid Transit (PRT) systems in urban area(s), electric and fuel cell passenger cars, high speed tilting trains, High Speed Rail (HSR), Trans Rapid Maglev (TRM), Evacuated Tube Transport system (ETT), advanced commercial subsonic and Supersonic Transport Aircraft (STA), conventionally- and Liquid Hydrogen (LH2)-fuelled commercial air trans...

  7. Guidance to risk-informed evaluation of technical specifications using PSA

    Energy Technology Data Exchange (ETDEWEB)

    Baeckstroem, O.; Haeggstroem, A. (Scandpower AB, Stockholm (Sweden)); Maennistoe, I. (VTT, Helsingfors (Finland))

    2010-04-15

    This report presents guidance for evaluation of Technical Specification conditions with PSA. It covers quality in PSA, how to verify that the PSA model is sufficiently robust and sufficiently complete and general requirements on methods. Acceptance criteria for evaluation of changes in the TS conditions are presented. As the probabilistic safety assessment (PSA) has developed over the years, it has demonstrated to constitute a useful tool for evaluating many aspects of the TS from a risk point of view. and in that way making the PSAs as well as the decision tools better. This also means that it will be possible to take credit for safety system overcapacity as well as inherent safety features and strength of non-safety classed systems. However, PSA is only one of the tools that shall be used in an evaluation process of TS changes (strengthening/relaxation). PSA is an excellent tool to be used to verify the importance, and thereby possibly relaxation, of TS requirements. But, since PSA is only one tool in the evaluation, it is not sufficient in itself for defining which equipment that shall or shall not have TS requirements. The purpose of this guidance document is to provide general requirements, requirements on methods and acceptance criteria on risk-informed evaluation of TS changes based on PSA. The purpose is not to provide a single solution. As part of the review of the TS conditions this guidance specify requirements on: - Quality verification of the PSA model; - Verification that the PSA model is sufficiently robust with regard to SSCs for which requirements both are and are not defined by the TS; - Verification that the SSCs, for which TS demands are to be evaluated, are modelled in a sufficient manner; - Methods for performing the evaluation; - Which evaluation criteria that shall be used (and how that is verified to be correct); - Acceptance criteria: This guidance also briefly discusses the documentation of the analysis of the TS changes. This guidance

  8. Performance Evaluation and Modelling of Container Terminals

    Science.gov (United States)

    Venkatasubbaiah, K.; Rao, K. Narayana; Rao, M. Malleswara; Challa, Suresh

    2018-02-01

    The present paper evaluates and analyzes the performance of 28 container terminals of south East Asia through data envelopment analysis (DEA), principal component analysis (PCA) and hybrid method of DEA-PCA. DEA technique is utilized to identify efficient decision making unit (DMU)s and to rank DMUs in a peer appraisal mode. PCA is a multivariate statistical method to evaluate the performance of container terminals. In hybrid method, DEA is integrated with PCA to arrive the ranking of container terminals. Based on the composite ranking, performance modelling and optimization of container terminals is carried out through response surface methodology (RSM).

  9. Performance evaluation of Central European companies

    Directory of Open Access Journals (Sweden)

    Petr Fiala

    2015-10-01

    Full Text Available The paper presents a modelling approach for performance comparison of Central European companies on three levels: country, industry, and company. The approach is based on Data Envelopment Analysis and Analytic Hierarchy Process. The proposed model consists of two basic sections. The first section estimates the importance of selected industries in the countries, whereas the second section evaluates the performance of companies within industries. The results of both sections are synthesized and finally the country performance is estimated. The evaluation is based on the data set resulting from a survey of companies from selected industries.

  10. Kicking velocity and physical, technical, tactical match performance for U18 female football players--effect of a new ball.

    Science.gov (United States)

    Andersen, Thomas B; Bendiksen, Mads; Pedersen, Jens M; Ørntoft, Christina; Brito, João; Jackman, Sarah R; Williams, Craig A; Krustrup, Peter

    2012-12-01

    We investigated kicking velocity and physical, technical, and tactical match performance for under-18 (U18) female football players and evaluated the effect of using a newly developed lighter smaller ball. Ten regional league teams participated. Maximal ball velocity was 4±1% higher when kicking the new ball (NB) compared with the standard ball (SB) in a laboratory testing situation (23.2±0.4 vs. 22.4±0.3 ms(-1); pgames with NB and SB (169±2 vs. 170±2 bmin(-1); p>.05), but lower-limb muscular RPE was lower with NB (4.2±0.4 vs. 5.2±0.3; p.05). High-intensity running decreased (p.05). In conclusion, physiological demands were high in youth female football games, and decrements in running performance occurred towards the end of games. The players kicked faster and reported lower muscular exertion during games played with a lighter smaller ball, but locomotor activities, heart rate and overall technical-tactical game performance remained unaffected. Copyright © 2012 Elsevier B.V. All rights reserved.

  11. Impact of Digital Tooth Preparation Evaluation Technology on Preclinical Dental Students' Technical and Self-Evaluation Skills.

    Science.gov (United States)

    Gratton, David G; Kwon, So Ran; Blanchette, Derek; Aquilino, Steven A

    2016-01-01

    The aim of this study was to evaluate the effect of digital tooth preparation imaging and evaluation technology on dental students' technical abilities, self-evaluation skills, and the assessment of their simulated clinical work. A total of 80 second-year students at one U.S. dental school were assigned to one of three groups: control (n=40), E4D Compare (n=20), and Sirona prepCheck (n=20). Students in the control group were taught by traditional teaching methodologies, and the technology-assisted groups received both traditional training and supplementary feedback from the corresponding digital system. Three outcomes were measured: faculty technical score, self-evaluation score, and E4D Compare scores at 0.30 mm tolerance. Correlations were determined between the groups' scores from visual assessment and self-evaluation and between the visual assessment and digital scores. The results showed that the visual assessment and self-evaluation scores did not differ among groups (p>0.05). Overall, correlations between visual and digital assessment scores were modest though statistically significant (5% level of significance). These results suggest that the use of digital tooth preparation evaluation technology did not impact the students' prosthodontic technical and self-evaluation skills. Visual scores given by faculty and digital assessment scores correlated moderately in only two instances.

  12. Preoperative short hookwire placement for small pulmonary lesions: evaluation of technical success and risk factors for initial placement failure.

    Science.gov (United States)

    Iguchi, Toshihiro; Hiraki, Takao; Matsui, Yusuke; Fujiwara, Hiroyasu; Masaoka, Yoshihisa; Tanaka, Takashi; Sato, Takuya; Gobara, Hideo; Toyooka, Shinichi; Kanazawa, Susumu

    2018-05-01

    To retrospectively evaluate the technical success of computed tomography fluoroscopy-guided short hookwire placement before video-assisted thoracoscopic surgery and to identify the risk factors for initial placement failure. In total, 401 short hookwire placements for 401 lesions (mean diameter 9.3 mm) were reviewed. Technical success was defined as correct positioning of the hookwire. Possible risk factors for initial placement failure (i.e., requirement for placement of an additional hookwire or to abort the attempt) were evaluated using logistic regression analysis for all procedures, and for procedures performed via the conventional route separately. Of the 401 initial placements, 383 were successful and 18 failed. Short hookwires were finally placed for 399 of 401 lesions (99.5%). Univariate logistic regression analyses revealed that in all 401 procedures only the transfissural approach was a significant independent predictor of initial placement failure (odds ratio, OR, 15.326; 95% confidence interval, CI, 5.429-43.267; p failure (OR 0.793, 95% CI 0.631-0.996; p = 0.046). The technical success of preoperative short hookwire placement was extremely high. The transfissural approach was a predictor initial placement failure for all procedures and small lesion size was a predictor of initial placement failure for procedures performed via the conventional route. • Technical success of preoperative short hookwire placement was extremely high. • The transfissural approach was a significant independent predictor of initial placement failure for all procedures. • Small lesion size was a significant independent predictor of initial placement failure for procedures performed via the conventional route.

  13. Supplier Performance Evaluation and Rating System (SPEARS)

    International Nuclear Information System (INIS)

    Oged, M.; Warner, D.; Gurbuz, E.

    1993-03-01

    The SSCL Magnet Quality Assurance Department has implemented a Supplier Performance Evaluation and Rating System (SPEARS) to assess supplier performance throughout the development and production stages of the SSCL program. The main objectives of SPEARS are to promote teamwork and recognize performance. This paper examines the current implementation of SPEARS. MSD QA supports the development and production of SSCsuperconducting magnets while implementing the requirements of DOE Order 5700.6C. The MSD QA program is based on the concept of continuous improvement in quality and productivity. The QA program requires that procurement of items and services be controlled to assure conformance to specification. SPEARS has been implemented to meet DOE requirements and to enhance overall confidence in supplier performance. Key elements of SPEARS include supplier evaluation and selection as well as evaluation of furnished quality through source inspection, audit, and receipt inspection. These elements are described in this paper

  14. Supplier Performance Evaluation and Rating System (SPEARS)

    International Nuclear Information System (INIS)

    Oged, M.; Warner, D.G.; Gurbuz, E.

    1994-01-01

    The SSCL Magnet Quality Assurance Department has implemented a Supplier Performance Evaluation and Rating System (SPEARS) to assess supplier performance throughout the development and production stages of the SSCL program. The main objectives of SPEARS are to promote teamwork and recognize performance. This paper examines the current implementation of SPEARS. MSD QA supports the development and production of SSC superconducting magnets while implementing the requirements of DOE Order 5700.6C. The MSD QA program is based on the concept of continuous improvement in quality and productivity. The QA program requires that procurement of items and services be controlled to assure conformance to specification. SPEARS has been implemented to meet DOE requirements and to enhance overall confidence in supplier performance. Key elements of SPEARS include supplier evaluation and selection as well as evaluation of furnished quality through source inspection, audit, and receipt inspection. These elements are described in this paper

  15. The Use of Workforce Assessment as a Component of Career and Technical Education Program Evaluation

    Science.gov (United States)

    Bartlett, Kenneth R.; Schleif, Nicole L.; Bowen, Mauvalyn M.

    2011-01-01

    This research project examined the extent to which Career and Technical Education (CTE)-related programs use workforce needs assessment as a component of their evaluation activities. An employer perspective was used to develop a conceptual framework drawing on strategic human resource management theory. The extent and methods utilized for…

  16. Organising, Providing and Evaluating Technical Training for Early Career Researchers: A Case Study

    Science.gov (United States)

    van Besouw, Rachel M.; Rogers, Katrine S.; Powles, Christopher J.; Papadopoulos, Timos; Ku, Emery M.

    2013-01-01

    This paper considers the importance of providing technical training opportunities for Early Career Researchers (ECRs) worldwide through the case study of a MATLAB training programme, which was proposed, organised, managed and evaluated by a team of five ECRs at the University of Southampton. The effectiveness of the programme in terms of the…

  17. Evaluation of the Curriculum of English Preparatory Classes at Yildiz Technical University Using CIPP Model

    Science.gov (United States)

    Akpur, Ugur; Alci, Bülent; Karatas, Hakan

    2016-01-01

    The purpose of this study is to evaluate the instruction program of preparatory classes at Yildiz Technical University using CIPP model. A total of 54 teachers and 753 university students attending preparatory classes in the Academic Year of 2014-2015 formed the study group. The research is based on a questionnaire applied to teachers and…

  18. Impact of Research and Technical Change in Wildland Recreation: Evaluation Issues and Approaches

    Science.gov (United States)

    David N. Bengston; Zhi Xu

    1993-01-01

    The development and diffusion of new technologies have had tremendous impacts on wildland recreation in recent decades. This article examines the potential economic impacts of research and technical change in wildland recreation. Two evaluation models are presented, a cost-price approach and a research intensity model, which are intended to shed some light on the...

  19. Chapter 1 Evaluation & Reporting System, 1989 Update. Technical Report No. 9013.

    Science.gov (United States)

    Davidoff, Stephen H.

    This technical report updates the Chapter 1 Evaluation and Reporting System (CHIERS) used by the Philadelphia (Pennsylvania) School District to gather and report student information related to compensatory education programs funded under Chapter 1 of the Education Consolidation and Improvement Act of 1981, with information about 1988-89 projects.…

  20. Performance Evaluation Model for Application Layer Firewalls.

    Directory of Open Access Journals (Sweden)

    Shichang Xuan

    Full Text Available Application layer firewalls protect the trusted area network against information security risks. However, firewall performance may affect user experience. Therefore, performance analysis plays a significant role in the evaluation of application layer firewalls. This paper presents an analytic model of the application layer firewall, based on a system analysis to evaluate the capability of the firewall. In order to enable users to improve the performance of the application layer firewall with limited resources, resource allocation was evaluated to obtain the optimal resource allocation scheme in terms of throughput, delay, and packet loss rate. The proposed model employs the Erlangian queuing model to analyze the performance parameters of the system with regard to the three layers (network, transport, and application layers. Then, the analysis results of all the layers are combined to obtain the overall system performance indicators. A discrete event simulation method was used to evaluate the proposed model. Finally, limited service desk resources were allocated to obtain the values of the performance indicators under different resource allocation scenarios in order to determine the optimal allocation scheme. Under limited resource allocation, this scheme enables users to maximize the performance of the application layer firewall.

  1. Performance Evaluation Model for Application Layer Firewalls.

    Science.gov (United States)

    Xuan, Shichang; Yang, Wu; Dong, Hui; Zhang, Jiangchuan

    2016-01-01

    Application layer firewalls protect the trusted area network against information security risks. However, firewall performance may affect user experience. Therefore, performance analysis plays a significant role in the evaluation of application layer firewalls. This paper presents an analytic model of the application layer firewall, based on a system analysis to evaluate the capability of the firewall. In order to enable users to improve the performance of the application layer firewall with limited resources, resource allocation was evaluated to obtain the optimal resource allocation scheme in terms of throughput, delay, and packet loss rate. The proposed model employs the Erlangian queuing model to analyze the performance parameters of the system with regard to the three layers (network, transport, and application layers). Then, the analysis results of all the layers are combined to obtain the overall system performance indicators. A discrete event simulation method was used to evaluate the proposed model. Finally, limited service desk resources were allocated to obtain the values of the performance indicators under different resource allocation scenarios in order to determine the optimal allocation scheme. Under limited resource allocation, this scheme enables users to maximize the performance of the application layer firewall.

  2. A Comparative Study of Students’ Track and Field Technical Performance in Sport Education and in a Direct Instruction Approach

    Science.gov (United States)

    Pereira, José; Hastie, Peter; Araújo, Rui; Farias, Cláudio; Rolim, Ramiro; Mesquita, Isabel

    2015-01-01

    This study examined students’ technical performances improvements in three track and field events (hurdles, shot put, and long jump) following either a Sport Education season or a Direct Instruction unit. An experienced Physical Education teacher taught two classes totalling 47 sixth-grade students (25 boys and 22 girls, aged between 10 and 13 years old) in 20, 45-minute lessons over 10 weeks. The students’ technical performances were analysed and evaluated through systematic observation of videos. The Wilcoxon signed-rank test was used to compare scores at three time points (pre-test, post-test and retention), and the Mann-Whitney U test was used to examine the differences within each instructional model at each assessment moment, as well as by gender and skill level. The impact of each instructional model in student learning was markedly distinct. While in Sport Education students of both genders and skill levels improved significantly in all events, in Direct Instruction, evidence of significant improvements was limited to boys and students of higher skill level. Key points The impact of each teaching approach in student learning was distinct. While in Sport Education the technical performance improvements spread throughout students of both genders and skill levels, in Direct Instruction significant improvements were exclusive to boys and students of higher skill level. The extended analysis in the current study, taking into account student gender and skill level, permitted a more comprehensive measure of the learning impact of the two approaches. More sophisticated analyses of the tasks and instructional strategies of each approach are encouraged. PMID:25729299

  3. A comparative study of students' track and field technical performance in sport education and in a direct instruction approach.

    Science.gov (United States)

    Pereira, José; Hastie, Peter; Araújo, Rui; Farias, Cláudio; Rolim, Ramiro; Mesquita, Isabel

    2015-03-01

    This study examined students' technical performances improvements in three track and field events (hurdles, shot put, and long jump) following either a Sport Education season or a Direct Instruction unit. An experienced Physical Education teacher taught two classes totalling 47 sixth-grade students (25 boys and 22 girls, aged between 10 and 13 years old) in 20, 45-minute lessons over 10 weeks. The students' technical performances were analysed and evaluated through systematic observation of videos. The Wilcoxon signed-rank test was used to compare scores at three time points (pre-test, post-test and retention), and the Mann-Whitney U test was used to examine the differences within each instructional model at each assessment moment, as well as by gender and skill level. The impact of each instructional model in student learning was markedly distinct. While in Sport Education students of both genders and skill levels improved significantly in all events, in Direct Instruction, evidence of significant improvements was limited to boys and students of higher skill level. Key pointsThe impact of each teaching approach in student learning was distinct. While in Sport Education the technical performance improvements spread throughout students of both genders and skill levels, in Direct Instruction significant improvements were exclusive to boys and students of higher skill level.The extended analysis in the current study, taking into account student gender and skill level, permitted a more comprehensive measure of the learning impact of the two approaches. More sophisticated analyses of the tasks and instructional strategies of each approach are encouraged.

  4. Vehicle Integrated Performance Analysis, the VIPA Experience: Reconnecting with Technical Integration

    Science.gov (United States)

    McGhee, David S.

    2005-01-01

    Today's NASA is facing significant challenges and changes. The Exploration initiative indicates a large increase in projects with limited increase in budget. The Columbia report has criticized NASA for its lack of insight and technical integration impacting its ability to provide safety. The Aldridge report is advocating NASA find new ways of doing business. Very early in the Space Launch Initiative (SLI) program a small team of engineers at MSFC were asked to propose a process for performing a system level assessment of a launch vehicle. The request was aimed primarily at providing insight and making NASA a "smart buyer." Out of this effort the VIPA team was created. The difference between the VIPA effort and many integration attempts is that VIPA focuses on using experienced people from various disciplines and a process which focuses them on a technically integrated assessment. Most previous attempts have focused on developing an all encompassing software tool. In addition, VIPA anchored its process formulation in the experience of its members and in early developmental Space Shuttle experience. The primary reference for this is NASA-TP-2001-210092, "Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned," and discussions with its authors. The foundations of VIPA's process are described. The VIPA team also recognized the need to drive detailed analysis earlier in the design process. Analyses and techniques typically done in later design phases, are brought forward using improved computing technology. The intent is to allow the identification of significant sensitivities, trades, and design issues much earlier in the program. This process is driven by the T-model for Technical Integration described in the aforementioned reference. VIPA's approach to performing system level technical integration is discussed in detail. Proposed definitions are offered to clarify this discussion and the general systems integration dialog. VIPA

  5. Effect of Age Group on Technical-Tactical Performance Profile of the Serve in Men's Volleyball.

    Science.gov (United States)

    García-de-Alcaraz, Antonio; Ortega, Enrique; Palao, José M

    2016-10-01

    The aim of this study was to analyze the technical-tactical performance profile of the serve for various age groups and categories of competition in men's volleyball. The sample comprised 13,262 serves performed by 986 players in 299 sets observed in various categories of competition (U-14, U-16, U-19, national senior, and international senior). An observational design was used. The variables studied were category of competition, type of execution, and serve performance. The results showed that for higher age groups (senior categories), there were significantly fewer jump serves and poorer serve performance, regardless of players' maturity and training development. The use of the jump serves increased the serve risk while attempting to hinder the organization of the opponent attack. This paper discusses the serve evolution and the implications on the training process at the different age groups in men's volleyball. © The Author(s) 2016.

  6. The evaluator as technical assistant: A model for systemic reform support

    Science.gov (United States)

    Century, Jeanne Rose

    This study explored evaluation of systemic reform. Specifically, it focused on the evaluation of a systemic effort to improve K-8 science, mathematics and technology education. The evaluation was of particular interest because it used both technical assistance and evaluation strategies. Through studying the combination of these roles, this investigation set out to increase understanding of potentially new evaluator roles, distinguish important characteristics of the evaluator/project participant relationship, and identify how these roles and characteristics contribute to effective evaluation of systemic science education reform. This qualitative study used interview, document analysis, and participant observation as methods of data collection. Interviews were conducted with project leaders, project participants, and evaluators and focused on the evaluation strategies and process, the use of the evaluation, and technical assistance. Documents analyzed included transcripts of evaluation team meetings and reports, memoranda and other print materials generated by the project leaders and the evaluators. Data analysis consisted of analytic and interpretive procedures consistent with the qualitative data collected and entailed a combined process of coding transcripts of interviews and meetings, field notes, and other documents; analyzing and organizing findings; writing of reflective and analytic memos; and designing and diagramming conceptual relationships. The data analysis resulted in the development of the Multi-Function Model for Systemic Reform Support. This model organizes systemic reform support into three functions: evaluation, technical assistance, and a third, named here as "systemic perspective." These functions work together to support the project's educational goals as well as a larger goal--building capacity in project participants. This model can now serve as an informed starting point or "blueprint" for strategically supporting systemic reform.

  7. Control assembly materials for water reactors: Experience, performance and perspectives. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2000-02-01

    The safe, reliable and economic operation of water cooled nuclear power reactors depends to a large extent upon the reliable operation of control assemblies for the regulation and shutdown of the reactors. These consist of neutron absorbing materials clad in stainless steel or zirconium based alloys, guide tubes and guide cards, and other structural components. Current designs have worked extremely well in normal conditions, but less than ideal behaviour limits the lifetimes of control materials, imposing an economic penalty which acts as a strong incentive to produce improved materials and designs that are more reliable. Neutron absorbing materials currently in use include the ceramic boron carbide, the high melting point metal hafnium and the low melting point complex alloy Ag-In-Cd. Other promising neutron absorbing materials, such as dysprosium titanate, are being evaluated in the Russian Federation. These control materials exhibit widely differing mechanical, physical and chemical properties, which must be understood in order to be able to predict the behaviour of control rod assemblies. Identification of existing failure mechanisms, end of life criteria and the implications of the gradual introduction of extended burnup, mixed oxide (MOX) fuels and more complex fuel cycles constitutes the first step in a search for improved materials and designs. In the early part of this decade, it was recognized by the International Working Group on Fuel Performance and Technology (IWGFPT) that international conferences, symposia and published reviews on the materials science aspects of control assemblies were few and far between. Consequently, the IWGFPT recommended that the IAEA should rectify this situation with a series of Technical Committee meetings (TCMs) devoted entirely to the materials aspects of reactor control assemblies. The first was held in 1993 and in the intervening five years considerable progress has been made. In bringing together experts in the

  8. Content and technical evaluation of Type III Iranian medical universities\\' websites

    Directory of Open Access Journals (Sweden)

    Khadejeh Shabankareh

    2016-05-01

    Full Text Available Background: Besides the role that universities websites have in reflection of universities’ educational and research activities, they have also significant importance in promotion of universities’ national and international ranking in webometrics ranking of world universities and also in webometric ranking of Islamic world Science Citation and subsequently obtaining national and international credibility and gaining student and funding. So, continuous evaluation of universities websites in different aspects, especially based on considering index of these ranking systems, is important. Therefore, present study aimed to review the situation of Type 3 Iranian medical universities’ websites based on content and technical features effecting on promotion of webometric rank. Materials and Methods : Present study is a survey with descriptive approach which descriptive the present situation of Type 3 Iranian medical universities’ websites. Data were collected using a researcher-made checklist which was consisted of two parts including content criteria effecting on webometric ranking (50 criteria and technical criteria of search engines optimization (52 criteria. Content evaluation of websites was done by researcher direct referring and observing. In order to evaluation of these websites, based on technical criteria of search engines optimization, automatic tools about website evaluation were used. Data were analyzed by SPSS20. Results: The finding of this study showed that, Gonabad, Bushehr & Shahrekord universities of medical sciences have the most accommodation with the research checklist.  Bam, Dezful & Jiroft universities of medical sciences have the least accommodation. According to research findings less than 50 percent of the research community, reached more than 50 percent of the criteria in checklist. Conclusion: Evaluation of studied websites indicated that whole websites are far from ideal situation. So type 3 medical universities

  9. Evaluating performance measures to determine training effectiveness

    International Nuclear Information System (INIS)

    Klemm, R.W.; Feiza, A.S.

    1987-01-01

    This research was conceived and dedicated to helping the CECo training organization become a more integrated part of the corporate business. The target population for this study was nuclear and fossil generating station employees who directly impacted the production of electricity. The target sample (n = 150) included: instrument, mechanical, and electrical maintenance personnel; control room operators; engineers, radiation chemists, and other technical specialists; and equipment operators and attendants. A total of four instruments were utilized by this study. Three instruments were administered to the generating station personnel. These included a demographic form, a learning style profile, and a motivational style profile. The focal instrument, a performance skills rating form, was administered to supervisory personnel. Data analysis consisted of three major parts. Part one established internal consistency through Cronbach alpha statistics. Part two provides summary statistics and breakdown tables for important variables. Part three provides inferential statistics responding to the research questions. All six Performance Skills variables discriminated significantly between the trained and non-trained groups (p .001). In all cases, the mean value for the trained group exceeded the mean value for the non-trained group. Implications for further research indicate that training does have a quantifiable effect on job performance

  10. Voluntary medical male circumcision scale-up in Nyanza, Kenya: evaluating technical efficiency and productivity of service delivery.

    Science.gov (United States)

    Omondi Aduda, Dickens S; Ouma, Collins; Onyango, Rosebella; Onyango, Mathews; Bertrand, Jane

    2015-01-01

    Voluntary medical male circumcision (VMMC) service delivery is complex and resource-intensive. In Kenya's context there is still paucity of information on resource use vis-à-vis outputs as programs scale up. Knowledge of technical efficiency, productivity and potential sources of constraints is desirable to improve decision-making. To evaluate technical efficiency and productivity of VMMC service delivery in Nyanza in 2011/2012 using data envelopment analysis. Comparative process evaluation of facilities providing VMMC in Nyanza in 2011/2012 using output orientated data envelopment analysis. Twenty one facilities were evaluated. Only 1 of 7 variables considered (total elapsed operation time) significantly improved from 32.8 minutes (SD 8.8) in 2011 to 30 minutes (SD 6.6) in 2012 (95%CI = 0.0350-5.2488; p = 0.047). Mean scale technical efficiency significantly improved from 91% (SD 19.8) in 2011 to 99% (SD 4.0) in 2012 particularly among outreach compared to fixed service delivery facilities (CI -31.47959-4.698508; p = 0.005). Increase in mean VRS technical efficiency from 84% (SD 25.3) in 2011 and 89% (SD 25.1) in 2012 was not statistically significant. Benchmark facilities were #119 and #125 in 2011 and #103 in 2012. Malmquist Productivity Index (MPI) at fixed facilities declined by 2.5% but gained by 4.9% at outreach ones by 2012. Total factor productivity improved by 83% (p = 0.032) in 2012, largely due to progress in technological efficiency by 79% (p = 0.008). Significant improvement in scale technical efficiency among outreach facilities in 2012 was attributable to accelerated activities. However, ongoing pure technical inefficiency requires concerted attention. Technological progress was the key driver of service productivity growth in Nyanza. Incorporating service-quality dimensions and using stepwise-multiple criteria in performance evaluation enhances comprehensiveness and validity. These findings highlight site-level resource use and sources of

  11. EFFECTS OF ARTIFICIAL TURF AND NATURAL GRASS ON PHYSICAL AND TECHNICAL PERFORMANCE OF PROFESSIONAL SOCCER PLAYERS

    Directory of Open Access Journals (Sweden)

    Juan Carlos Ávalos Guillén

    2017-05-01

    Full Text Available The purpose of this study was to compare the effect of artificial turf (AT and natural grass (NG on the physical and technical performance of professional soccer players. A total of 17 healthy male soccer players (24.0 ± 4.1 years, height 174 ± 6.1 cm; body weight 73.4 ± 6.3 kg; body fat % 14.2 ± 2.3; VO2max 55.5 ± 5.3 ml/kg/min from a Costa Rican Professional Soccer League club were subjected to different tests in both types of surfaces (technical test, agility test, repeated sprint ability test, and a small-sided game [8 minutes, 32 x 32 meters, 5 vs. 5]. Players were monitored using a GPS in two sessions, separated by 48 hours, during the club’s pre-season. There were no significant differences between the two types of surfaces for the technical, agility, and repeated sprint ability tests. The physiological and kinematic variables analyzed during the small-sided game presented significant differences in average heart rate (NG = 168.5 ± 8.8, AT = 154.8 ± 11.8, p <.001, maximum heart rate (NG = 183.2 ± 8.3, AT = 175.9 ± 10.4, p =.02, body load (NG = 34.3 ± 11.2, AT = 30.5 ± 11.4, p =.03, and total impacts (NG = 230.1 ± 89.5, AT = 194. 8 ± 86.4, p=.03. It is concluded that playing on the natural grass surface caused more impact on physiological and perceived body load in players. In the case of technical variables, it is concluded that there were no statistically significant differences between the two types of surfaces (p <0.05.

  12. Evaluation of the Technical-Economic Potential of Particle- Reinforced Aluminum Matrix Composites and Electrochemical Machining

    International Nuclear Information System (INIS)

    Schubert, A; Hackert-Oschätzchen, M; Lehnert, N; Götze, U; Herold, F; Schmidt, A; Meichsner, G

    2016-01-01

    Compared to conventional cutting, the processing of materials by electrochemical machining offers some technical advantages like high surface quality, no thermal or mechanical impact on the work piece and preservation of the microstructure of the work piece material. From the economic point of view, the possibility of process parallelization and the absence of any process-related tool wear are mentionable advantages of electrochemical machining. In this study, based on experimental results, it will be evaluated to what extent the electrochemical machining is technically and economically suitable for the finish-machining of particle- reinforced aluminum matrix composites (AMCs). Initial studies showed that electrochemical machining - in contrast to other machining processes - has the potential to fulfil demanding requirements regarding precision and surface quality of products or components especially when applied to AMCs. In addition, the investigations show that processing of AMCs by electrochemical machining requires less energy than the electrochemical machining of stainless steel. Therefore, an evaluation of electrochemically machined AMCs - compared to stainless steel - from a technical and an economic perspective will be presented in this paper. The results show the potential of electro-chemically machined AMCs and contribute to the enhancement of instruments for technical-economic evaluations as well as a comprehensive innovation control. (paper)

  13. Virginia power's human performance evaluation system (HPES)

    International Nuclear Information System (INIS)

    Patterson, W.E.

    1991-01-01

    This paper reports on the Human Performance Evaluation System (HPES) which was initially developed by the Institute of Nuclear Power Operations (INPO) using the Aviation Safety Reporting System (ASRS) as a guide. After a pilot program involving three utilities ended in 1983, the present day program was instituted. A methodology was developed, for specific application to nuclear power plant employees, to aid trained coordinators/evaluators in determining those factors that exert a negative influence on human behavior in the nuclear power plant environment. HPES is for anyone and everyone on site, from contractors to plant staff to plant management. No one is excluded from participation. Virginia Power's HPES program goal is to identify and correct the root causes of human performance problems. Evaluations are performed on reported real or perceived conditions that may have an adverse influence on members of the nuclear team. A report is provided to management identifying root cause and contributing factors along with recommended corrective actions

  14. Technical and clinical breast cancer screening performance indicators for computed radiography versus direct digital radiography.

    Science.gov (United States)

    Bosmans, Hilde; De Hauwere, An; Lemmens, Kim; Zanca, Federica; Thierens, Hubert; Van Ongeval, Chantal; Van Herck, Koen; Van Steen, Andre; Martens, Patrick; Bleyen, Luc; Vande Putte, Gretel; Kellen, Eliane; Mortier, Griet; Van Limbergen, Erik

    2013-10-01

    To compare technical and clinical screening performance parameters between computed radiography (CR) and direct digital radiography (DR) systems. The number of women screened with CR was 73,008 and with DR 116,945. Technical and patient dose survey data of 25 CR and 37 DR systems were available. Technical performance was expressed by threshold thickness values at the mean glandular dose (MGD) level of routine practice. Clinical indicators included recall rate (RR), cancer detection rate (CDR), percentage of ductal carcinoma in situ (DCIS), percentage of cancers with T-scores smaller than 1 cm and positive predictive value (PPV). Contrast threshold values for the 0.1-mm gold disk were 1.44 μm (SD 0.13 μm) for CR and 1.20 μm (SD 0.13 μm for DR). MGD was 2.16 mGy (SD 0.36 mGy) and 1.35 mGy (SD 0.32 mGy) for CR and DR respectively. We obtained for CR, respectively DR, the following results: RR in the first round of 5.48 % versus 5.61 %; RR in subsequent rounds of 2.52 % versus 2.65 %; CDR of 0.52 % versus 0.53 %; DCIS of 0.08 % versus 0.11 %; a rate of cancers with T-scores smaller than 1 cm of 0.11 % versus 0.11 %; PPV of 18.45 % versus 18.64 %; none of them was significantly different. Our screening indicators are reassuring for the use of CR and DR, with CR operating at 60 % higher MGD. • Breast cancer screening can employ both computed (CR) and direct digital radiography (DR). • Screening performance parameters for CR and DR technology are not significantly different. • Screening parameters are in accordance with European Guidelines. • Radiation doses employed for CR are generally 60 % greater than for DR.

  15. Radiographic technical quality of root canal treatment performed ex vivo by dental students at Valencia University Medical and Dental School, Spain.

    Science.gov (United States)

    Román-Richon, Sophie; Faus-Matoses, Vicente; Alegre-Domingo, Teresa; Faus-Llácer, Vicente-José

    2014-01-01

    To evaluate radiographically the quality of root canal fillings and compare manual and rotary preparation performed on extracted teeth by undergraduate dental students. A total of 561 premolars and molars extracted teeth were prepared using nickel-titanium rotary files or manual instrumentation and filled with gutta-percha using a cold lateral condensation technique, by 4th grade undergraduate students. Periapical radiographs were used to assess the technical quality of the root canal filling, evaluating three variables: length, density and taper. These data were recorded, scored and used to study the "technical success rate" and the "overall score". The length of each root canal filling was classified as acceptable, short and overfilled, based on their relationship with the radiographic apex. Density and taper of filling were evaluated based on the presence of voids and the uniform tapering of the filling, respectively. Statistical analysis was used to evaluate the quality of root canal treatment, considering p < 0.05 as a statistical significant level. The percentage of technical success was 44% and the overall score was 7.8 out of 10. Technical success and overall score were greater with rotary instruments (52% against 28% with a manual one, p < 0.001; 8.3 against 6.7 respectively, p < 0.001). It appears that inexperienced operators perform better root canal treatment (RCT) with the use of rotary instrumentation.

  16. Assessing implicit gender bias in Medical Student Performance Evaluations.

    Science.gov (United States)

    Axelson, Rick D; Solow, Catherine M; Ferguson, Kristi J; Cohen, Michael B

    2010-09-01

    For medical schools, the increasing presence of women makes it especially important that potential sources of gender bias be identified and removed from student evaluation methods. Our study looked for patterns of gender bias in adjective data used to inform our Medical Student Performance Evaluations (MSPEs). Multigroup Confirmatory Factor Analysis (CFA) was used to model the latent structure of the adjectives attributed to students (n = 657) and to test for systematic scoring errors by gender. Gender bias was evident in two areas: (a) women were more likely than comparable men to be described as ''compassionate,'' ''sensitive,'' and ''enthusiastic'' and (b) men were more likely than comparable women to be seen as ''quick learners.'' The gender gap in ''quick learner'' attribution grows with increasing student proficiency; men's rate of increase is over twice that of women's. Technical and nontechnical approaches for ameliorating the impact of gender bias on student recommendations are suggested.

  17. Technical evaluation report on the proposed design modifications and technical specification changes on grid voltage degradation for the Millstone Nuclear Power Station, Unit 1

    International Nuclear Information System (INIS)

    Selan, J.C.

    1982-01-01

    This report documents the technical evaluation of the proposed design modifications and Technical Specification change for protection of Class 1E equipment from grid voltage degradation for the Millstone Nuclear Power Station, Unit 1. The review criteria are based on several IEEE standards and the Code of Federal Regulations. The evaluation finds that the licensee has not provided sufficient information on the undervoltage protection system to allow a complete evaluation into the adequacy of protecting the Class 1E equipment from sustained voltage degradation

  18. American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance for Geothermal Resource Evaluation Projects

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Breckenridge; Thomas R. Wood; Joel Renner

    2010-09-01

    The purpose of this document is to report on the evaluation of geothermal resource potential on and around three different United States (U. S.) Air Force Bases (AFBs): Nellis AFB and Air Force Range (AFR) in the State of Nevada (see maps 1 and 5), Holloman AFB in the State of New Mexico (see map 2), and Mountain Home AFB in the State of Idaho (see map 3). All three sites are located in semi-arid parts of the western U. S. The U. S. Air Force, through its Air Combat Command (ACC) located at Langley AFB in the State of Virginia, asked the Federal Energy Management Program (FEMP) for technical assistance to conduct technical and feasibility evaluations for the potential to identify viable geothermal resources on or around three different AFBs. Idaho National Laboratory (INL) is supporting FEMP in providing technical assistance to a number of different Federal Agencies. For this report, the three different AFBs are considered one project because they all deal with potential geothermal resource evaluations. The three AFBs will be evaluated primarily for their opportunity to develop a geothermal resource of high enough quality grade (i.e., temperature, productivity, depth, etc.) to consider the possibility for generation of electricity through a power plant. Secondarily, if the resource for the three AFBs is found to be not sufficient enough for electricity generation, then they will be described in enough detail to allow the base energy managers to evaluate if the resource is suitable for direct heating or cooling. Site visits and meetings by INL personnel with the staff at each AFB were held in late FY-2009 and FY-2010. This report provides a technical evaluation of the opportunities and challenges for developing geothermal resources on and around the AFBs. An extensive amount of literature and geographic information was evaluated as a part of this assessment. Resource potential maps were developed for each of the AFBs.

  19. Methodology to determine the technical performance and value proposition for grid-scale energy storage systems :

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, Raymond Harry; Loose, Verne William; Donnelly, Matthew K.; Trudnowski, Daniel J.

    2012-12-01

    As the amount of renewable generation increases, the inherent variability of wind and photovoltaic systems must be addressed in order to ensure the continued safe and reliable operation of the nation's electricity grid. Grid-scale energy storage systems are uniquely suited to address the variability of renewable generation and to provide other valuable grid services. The goal of this report is to quantify the technical performance required to provide di erent grid bene ts and to specify the proper techniques for estimating the value of grid-scale energy storage systems.

  20. Confronting Regulatory Cost and Quality Expectations. An Exploration of Technical Change in Minimum Efficiency Performance Standards

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Margaret [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stanford Univ., CA (United States); Spurlock, C. Anna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yang, Hung-Chia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-09-21

    The dual purpose of this project was to contribute to basic knowledge about the interaction between regulation and innovation and to inform the cost and benefit expectations related to technical change which are embedded in the rulemaking process of an important area of national regulation. The area of regulation focused on here is minimum efficiency performance standards (MEPS) for appliances and other energy-using products. Relevant both to U.S. climate policy and energy policy for buildings, MEPS remove certain product models from the market that do not meet specified efficiency thresholds.

  1. A Comparative Study of Students’ Track and Field Technical Performance in Sport Education and in a Direct Instruction Approach

    Directory of Open Access Journals (Sweden)

    José Pereira, Peter Hastie, Rui Araújo, Cláudio Farias, Ramiro Rolim

    2015-03-01

    Full Text Available This study examined students’ technical performances improvements in three track and field events (hurdles, shot put, and long jump following either a Sport Education season or a Direct Instruction unit. An experienced Physical Education teacher taught two classes totalling 47 sixth-grade students (25 boys and 22 girls, aged between 10 and 13 years old in 20, 45-minute lessons over 10 weeks. The students’ technical performances were analysed and evaluated through systematic observation of videos. The Wilcoxon signed-rank test was used to compare scores at three time points (pre-test, post-test and retention, and the Mann-Whitney U test was used to examine the differences within each instructional model at each assessment moment, as well as by gender and skill level. The impact of each instructional model in student learning was markedly distinct. While in Sport Education students of both genders and skill levels improved significantly in all events, in Direct Instruction, evidence of significant improvements was limited to boys and students of higher skill level.

  2. Evaluating Nonclinical Performance of the Academic Pathologist

    Directory of Open Access Journals (Sweden)

    Austin Blackburn Wiles MD

    2018-02-01

    Full Text Available Academic pathologists perform clinical duties, as well as valuable nonclinical activities. Nonclinical activities may consist of research, teaching, and administrative management among many other important tasks. While clinical duties have many clear metrics to measure productivity, like the relative value units of Medicare reimbursement, nonclinical performance is often difficult to measure. Despite the difficulty of evaluating nonclinical activities, nonclinical productivity is used to determine promotion, funding, and inform professional evaluations of performance. In order to better evaluate the important nonclinical performance of academic pathologists, we present an evaluation system for leadership use. This system uses a Microsoft Excel workbook to provide academic pathologist respondents and reviewing leadership a transparent, easy-to-complete system that is both flexible and scalable. This system provides real-time feedback to academic pathologist respondents and a clear executive summary that allows for focused guidance of the respondent. This system may be adapted to fit practices of varying size, measure performance differently based on years of experience, and can work with many different institutional values.

  3. Use of PSA Level 2 analysis for improving containment performance. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    1998-03-01

    In order to discuss and exchange experience on different aspects of methods associated with Level 2 PSA and its applications for improving containment performance, the IAEA held a Technical Committee meeting in Vienna in December 1996. The meeting, which was attended by 26 participants from 20 Member States, provided a broad forum for discussion. The meeting addressed the issues related to the actual performance of Level 2 PSA studies as well as the insights gained from applications to improve containment performance. Particular attention was given to studies and applications for WWER type reactors, for which Level 2 work is still in its early stages, and for channel type reactors where modelling of accident progression is complex and significantly different from vessel type light water reactors. This TECDOC contains the papers presented at the meeting and the results of extensive discussions which were held in specific working groups

  4. The back squat: A proposed assessment of functional deficits and technical factors that limit performance

    Science.gov (United States)

    Myer, Gregory D.; Kushner, Adam M.; Brent, Jensen L.; Schoenfeld, Brad J.; Hugentobler, Jason; Lloyd, Rhodri S.; Vermeil, Al; Chu, Donald A.; Harbin, Jason; McGill, Stuart M.

    2014-01-01

    Fundamental movement competency is essential for participation in physical activity and for mitigating the risk of injury, which are both key elements of health throughout life. The squat movement pattern is arguably one of the most primal and critical fundamental movements necessary to improve sport performance, to reduce injury risk and to support lifelong physical activity. Based on current evidence, this first (1 of 2) report deconstructs the technical performance of the back squat as a foundation training exercise and presents a novel dynamic screening tool that incorporates identification techniques for functional deficits that limit squat performance and injury resilience. The follow-up report will outline targeted corrective methodology for each of the functional deficits presented in the assessment tool. PMID:25506270

  5. An underestimated issue: unsuspected decrease of sound processor microphone sensitivity, technical, and clinical evaluation.

    Science.gov (United States)

    Razza, Sergio; Burdo, Sandro

    2011-05-01

    To describe the rate of occurrence of unsuspected decrease in sensitivity of the sound processor microphone and to evaluate its effect on the patient's audiological performance in terms of reduction in speech recognition scores. Speech processor microphones were tested by connecting the speech processor acoustic monitor circuit to a hearing aid analyzer. The response curves were compared with those obtained from fully working microphones. During a 6-month investigation period, microphone response curves were measured from a group of cochlear implant recipients who had not reported any problems. Despite the absence of any subjective problem, some microphones were found to show a loss of sensitivity. Their users, aged between 4 and 67 years, were tested both with the defective and a working microphone in order to calculate the correlation between the degree of microphone failure and the decline in audiological performance. To quantify the effect of microphone failure, patients' speech recognition skills were measured by live voice connected discourse tracking series administered in different conditions and by recorded sentences lists. A total of 120 apparently fully functioning sound processors were tested in the investigation: 33 (27.5%) were affected by a subjectively unreported sensitivity decrease. Speech-tracking scores correlated significantly with the loss of microphone sensitivity in all test conditions (r = 0.69-0.77, P processor microphone sensitivity causes a degree of hearing decline that negatively affects the cochlear recipient's clinical performance. Microphone faults are often unreported events, and their occurrence rate is underestimated. To establish that the microphone is providing correct input to the speech processor a standard control procedure, including technical and clinical checks, is needed in clinical practice.

  6. What form of relative performance evaluation?

    OpenAIRE

    Marco Celentani; Rosa Loveira-Pazó

    2004-01-01

    We study relative performance evaluation in executive compensation when executives have private information about their ability. We assume that the joint distribution of an individual firm’s profit and market movements depends on the ability of the executive that runs the firm. In the equilibrium of the executive labor market, compensation schemes exploit this fact to sort executives of di ?erent abilities. This implies that executive compensation is increasing in own performance, but may als...

  7. Methods of Evaluating Performances for Marketing Strategies

    OpenAIRE

    Ioan Cucu

    2005-01-01

    There are specific methods for assessing and improving the effectiveness of a marketing strategy. A marketer should state in the marketing plan what a marketing strategy is supposed to accomplish. These statements should set forth performance standards, which usually are stated in terms of profits, sales, or costs. Actual performance must be measured in similar terms so that comparisons are possible. This paper describes sales analysis and cost analysis, two general ways of evaluating the act...

  8. An evaluation of technical and economic capacity of farmers of Rural Production Cooperatives. Case Study: Neishabour

    Directory of Open Access Journals (Sweden)

    Maryam Hadizadeh Bazaz

    2017-01-01

    Full Text Available The main objective of this article is to investigate the impact of cooperatives on the technical and economical empowering of farmers and agricultural development in the villages of Neishabour. The method of this research is analytical – descriptive and it has been carried out in 2013.  The statistical society is composed of 4685 members and non-members of cooperatives in twenty villages of Neishabour. The sample size via the Cochran formula and stratified sampling technique has been calculated to be 252.  Data collection has been performed through documentation and field study. For data analysis, the SPSS software package and the T-Student Test have been employed. The results of statistical analysis based on 13 economic indicators revealed that the average economic stability of the members is 2.64 which is slightly higher than 2.47; that is the average economic stability of non-members. Independent samples T-Test results between members and non-members revealed that the probability value is 0.004 which indicates that there exists a significant difference between average economic stability of members and non-members. The T-Test results with hypothetical mean of 3 and 4 showed that the majority of indicators are less than the average. Therefore, the impact of cooperatives in economic development is evaluated to be below the average limit and cooperatives could not play an important role in increasing the economic empowerment of farmers.

  9. Prospective safety performance evaluation on construction sites.

    Science.gov (United States)

    Wu, Xianguo; Liu, Qian; Zhang, Limao; Skibniewski, Miroslaw J; Wang, Yanhong

    2015-05-01

    This paper presents a systematic Structural Equation Modeling (SEM) based approach for Prospective Safety Performance Evaluation (PSPE) on construction sites, with causal relationships and interactions between enablers and the goals of PSPE taken into account. According to a sample of 450 valid questionnaire surveys from 30 Chinese construction enterprises, a SEM model with 26 items included for PSPE in the context of Chinese construction industry is established and then verified through the goodness-of-fit test. Three typical types of construction enterprises, namely the state-owned enterprise, private enterprise and Sino-foreign joint venture, are selected as samples to measure the level of safety performance given the enterprise scale, ownership and business strategy are different. Results provide a full understanding of safety performance practice in the construction industry, and indicate that the level of overall safety performance situation on working sites is rated at least a level of III (Fair) or above. This phenomenon can be explained that the construction industry has gradually matured with the norms, and construction enterprises should improve the level of safety performance as not to be eliminated from the government-led construction industry. The differences existing in the safety performance practice regarding different construction enterprise categories are compared and analyzed according to evaluation results. This research provides insights into cause-effect relationships among safety performance factors and goals, which, in turn, can facilitate the improvement of high safety performance in the construction industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Satellite power system concept development and evaluation program system definition technical assessment report

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    The results of the system definition studies conducted by NASA as a part of the Department of Energy/National Aeronautics and Space Administration SPS Concept Development and Evaluation Program are summarized. The purpose of the system definition efforts was to identify and define candidate SPS concepts and to evaluate the concepts in terms of technical and cost factors. Although the system definition efforts consisted primarily of evaluation and assessment of alternative technical approaches, a reference system was also defined to facilitate economic, environmental, and societal assessments by the Department of Energy. This reference system was designed to deliver 5 GW of electrical power to the utility grid. Topics covered include system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.

  11. Non-technical skills evaluation in the critical care air ambulance environment: introduction of an adapted rating instrument--an observational study.

    Science.gov (United States)

    Myers, Julia A; Powell, David M C; Psirides, Alex; Hathaway, Karyn; Aldington, Sarah; Haney, Michael F

    2016-03-08

    In the isolated and dynamic health-care setting of critical care air ambulance transport, the quality of clinical care is strongly influenced by non-technical skills such as anticipating, recognising and understanding, decision making, and teamwork. However there are no published reports identifying or applying a non-technical skills framework specific to an intensive care air ambulance setting. The objective of this study was to adapt and evaluate a non-technical skills rating framework for the air ambulance clinical environment. In the first phase of the project the anaesthetists' non-technical skills (ANTS) framework was adapted to the air ambulance setting, using data collected directly from clinician groups, published literature, and field observation. In the second phase experienced and inexperienced inter-hospital transport clinicians completed a simulated critical care air transport scenario, and their non-technical skills performance was independently rated by two blinded assessors. Observed and self-rated general clinical performance ratings were also collected. Rank-based statistical tests were used to examine differences in the performance of experienced and inexperienced clinicians, and relationships between different assessment approaches and assessors. The framework developed during phase one was referred to as an aeromedical non-technical skills framework, or AeroNOTS. During phase two 16 physicians from speciality training programmes in intensive care, emergency medicine and anaesthesia took part in the clinical simulation study. Clinicians with inter-hospital transport experience performed more highly than those without experience, according to both AeroNOTS non-technical skills ratings (p = 0.001) and general performance ratings (p = 0.003). Self-ratings did not distinguish experienced from inexperienced transport clinicians (p = 0.32) and were not strongly associated with either observed general performance (r(s) = 0.4, p = 0

  12. Conversion of transuranic waste to low level waste by decontamination: a technical and economic evaluation

    International Nuclear Information System (INIS)

    Allen, R.P.; Hazelton, R.F.

    1984-12-01

    A study was conducted to evaluate the technical and economic feasibility of using in-situ decontamination techniques to convert glove boxes and other large TRU-contaminated components directly into LLW. The results of the technical evaluation indicate that in-situ decontamination of these types of components to non-TRU levels is technically feasible. Applicable decontamination techniques include electropolishing, hand scrubbing, chemical washes/sprays, strippable coatings and Freon spray-cleaning. The removal of contamination from crevices and other holdup areas remains a problem, but may be solved through further advances in decontamination technology. Also, the increase in the allowable maximum TRU level from 10 nCi/g to 100 nCi/g as defined in DOE Order 5820.2 reduces the removal requirement and facilitates measurement of the remaining quantities. The major emphasis of the study was on a cost/benefit evaluation that included a review and update of previous analyses and evaluations of TRU-waste volume reduction and conversion options. The results of the economic evaluation show, for the assumptions used, that there is a definite cost incentive to size reduce large components, and that decontamination of sectioned material has become cost competitive with the size reduction options. In-situ decontamination appears to be the lowest cost option when based on routine-type operations conducted by well-trained and properly equipped personnel. 16 references, 1 figure, 7 tables

  13. Methodology for the technical evaluation of disposal systems for Greater-Than-Class C low-level radioactive waste

    International Nuclear Information System (INIS)

    Lamar, D.A.; Raymond, J.R.

    1990-07-01

    This paper presents the methodology that will be used for the evaluation of alternative disposal concepts for Greater-Than-Class C low-level radioactive waste. The primary focus will be on the technical evaluation of various disposal concepts leading toward the identification of technically feasible disposal systems

  14. Subjective performance evaluations and employee careers

    DEFF Research Database (Denmark)

    Frederiksen, Anders; Lange, Fabian; Kriechell, Ben

    examine personnel data from six large companies and establish how subjective ratings, interpreted as ordinal rankings of employee performances within narrowly defined peer-groups, correlate with objective career outcomes. We find many similarities across firms in how subjective ratings correlate with base......Firms commonly use supervisor evaluations to assess the performance of employees who work in complex environments. Doubts persist whether their subjective nature invalidates using these performance measures to learn about careers of individuals and to inform theory in personnel economics. We...

  15. Development and Performance Evaluation of Indigenously Made ...

    African Journals Online (AJOL)

    A study was conducted to develop, construct and evaluate the performance of cooling chambers made from factory pressed burnt clay (structure-1), locally molded mud blocks (structure-2) and wood wall (structure-3) for extending the shelf life of mangoes and sweet oranges. It was observed that structure-1 significantly ...

  16. Subjective performance evaluation and gender discrimination

    NARCIS (Netherlands)

    Maas, V.S.; Torres-Gonzalez, R.

    2011-01-01

    Gender discrimination continues to be a problem in organizations. It is therefore important that organizations use performance evaluation methods that ensure equal opportunities for men and women. This article reports the results of an experiment to investigate whether and, if so, how the gender of

  17. Performance Assesment of Bauchi Polytechnics and Technical Colleges Using Quality Assurance Indicators in Nigeria Qualification Framework

    Directory of Open Access Journals (Sweden)

    Idris Adamu

    2016-07-01

    Full Text Available Technical and Vocational Education emphases skill acquisition, Quality Assurance in vocational education is concept that is concerned with high performance involved activities with vocational education such as teaching, learning, infrastructures, student’s behavior and entire academic process. Good quality education is very necessary in the total development of staff and students which ensures proper development, job prospects and the realization of academic goals and objects. Enhanced and sustained to ensure accountability and improve performance. Higher educational institutions in Nigeria continue to experience carelessly attitude about the use of Quality Assurance to understand the risk they are exposed to poor standard. To address these issues, the study embarked upon to determine the level of performance and difference usability of Quality Assurance in Polytechnics and Technical Colleges in Bauchi state. Quantitative method technique was employed using survey questionnaires, 60 staff both senior and junior within these institutions were selected and a questionnaire distributed for their responses. The data were analysed using SPSS software. The result reveals that Federal Polytechnic Bauchi and State Polytechnic Bauchi has high level of Performance about Quality Assurance indicators while College of Education Azare has medium level of Performance. College of education Azare has highest mean rank of 29.87 and percentage of 31.8% obtained from the output result indicated that it has high usability to Quality Assurance, followed by Federal Polytechnic Bauchi with medium usability then State Polytechnic Bauchi has low usability to Quality Assurance. The study concluded by Quality Assurance Unit be made aware to each institution staff to enable recognize the benefits of it. Federal government should give more funding and employ staff to cater the need of Quality Assurance Unit in every institution so that it will help the students to develop

  18. Organizational factors influencing human performance in nuclear power plants. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-05-01

    In 1991 a Safety Series report on Safety Culture of the International Nuclear Safety Advisory Group (INSAG) was published as 75-INSAG-4 by the IAEA. This report deals with the concept of Safety Culture as it relates to organizations and individuals involved in the operations of nuclear power plants (NPPs). Generally, the role of management and organization in assuring the safe operation of NPPs has been widely recognized and its importance accepted. However, the understanding of what constitutes effective management and organization the area of safety is less developed than the understanding of most of the technical issues which plant operators and regulatory bodies are confronted with. The Technical Committee meeting provided a forum for a broad exchange of information on practices and experiences in the area of organization and management to accomplish operational safety in NPPs and thus enhance Safety Culture. This report and the papers presented at the meeting discuss those factors which influence and improve human performance covering both aspects, i.e. the basic requirements imposed on the operator and the ways of managerial support which enhance the reliable and safety oriented performance of operators. Refs, figs, tabs

  19. A performance evaluation of point pair features

    DEFF Research Database (Denmark)

    Kiforenko, Lilita; Drost, Bertram; Tombari, Federico

    2018-01-01

    of relations between two points). Our comparison is made on 7 publicly available datasets, showing variations on a number of parameters, e.g. acquisition technique, the number of objects/scenes and the amount of occlusion and clutter. We evaluate feature performance both at a point-wise object...... datasets. However, to the best of our knowledge, no comprehensive evaluation of these features has been made. In this work, we evaluate PPFs on a large set of 3D scenes. We not only compare PPFs to local point cloud descriptors, but also investigate the internal variations of PPFs (different types......-scene correspondence level and for overall object detection and pose estimation in a RANSAC pipeline. Additionally, we also present object detection and pose estimation results for the original, voting based, PPF algorithm. Our results show that in general PPF is the top performer, however, there are datasets, which...

  20. Decision support system for utility performance evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Anselin, L.; Henderson, J.S.

    1985-01-01

    In a previous NRRI report (Anselin, Pike, Smith (1981), ''The Measurement of Electric Utility Performance: Preliminary Analysis''), an overview of several traditional methodologies to achieve this was presented (management audits, financial and engineering indexes, econometric studies), and a new technique based on multicriteria decision analysis was suggested. In this report, the decision analytic method for performance evaluation is considered in more detail, and compared to the more traditional approaches of a total factor productivity index (TFP) and econometric cost function estimates. Utility performance evaluation is considered as part of a decision support system, i.e., the combination of an information system (data base) and a set of operational decision rules (performance indexes). As part of this decision support system, an extensive data on 210 variables for 123 privately owned electric utilities over the period 1964-1981. Multicriteria evaluation techniques, such as the analytic hierarchy process and concordance analysis, and economic techniques, such as a total factor productivity (TFP) index and the residual analysis of econometric short- and long-run cost functions are discussed in detail with respect to their methodological and theoretical foundations. They are also implemented empirically on a common data base, and compared with respect to the resulting performance rating of the companies. 78 references.

  1. Effects of Performance-Based Financial Incentives on Work Performance: A Study of Technical-Level Employees in the Private Sector in Sri Lanka

    Science.gov (United States)

    Wickramasinghe, Vathsala; Dabere, Sampath

    2012-01-01

    The objective of the study is to investigate the effect of performance-based financial incentives on work performance. The study hypothesized that the design features of performance-based financial incentive schemes themselves may influence individuals' work performance. For the study, survey methodology was used and 93 technical-level employees…

  2. Food science and technology students self-evaluate soft and technical skills

    Directory of Open Access Journals (Sweden)

    Katherine M. Flynn

    2017-10-01

    Full Text Available Food Scientists and Technologists (FS&T need diverse skills in the globalized food and drink sector: Food-specific or scientific / technical skills and generic or intuitive soft skills. This study determined how satisfied FS&T students were with overall improvement, and in key technical and soft skills, based on their university work; and if satisfaction was linked to geography, degree in progress, anticipated degree, anticipated work place or anticipated job responsibility. An on-line survey was completed by 267 students in over 20 countries using a 5-point Likert scale to evaluate satisfaction. Responses were analyzed by the Friedman or Kruskal Wallis tests for more than two groups, otherwise by the Wilcoxon Signed Rank or Mann-Whitney tests. There were no differences in Overall Satisfaction with technical and soft skills training. Among soft skills, training in Working with Others and Being Responsible were more often rated “Excellent” and students were more satisfied with their training than with Solving Problems, Communication and Positive Attitude. Students anticipating a job with high responsibility were more satisfied with overall soft skill training and with 3 of the 5 specific soft skills. Among technical skills, students were more satisfied with improvement in basic sciences (Microbiology, Chemistry, Processing, Safety, and those in Northern Europe were more satisfied with overall technical training. These data show variations in perception and/or efficacy of technical and soft skill training in Food Science programmes and underline the need for separate attention to the incorporation of soft skill training into the design of FS&T courses.

  3. Proceedings from the technical workshop on near-field performance assessment for high-level waste

    International Nuclear Information System (INIS)

    Sellin, P.; Apted, M.; Gago, J.

    1991-12-01

    This report contains the proceedings of 'Technical workshop of near-filed performance assessment for high-level waste' held in Madrid October 15-17, 1990. It includes the invited presentations and summaries of the scientific discussions. The workshop covered several topics: * post-emplacement environment, * benchmarking of computer codes, * glass release, * spent-fuel release, * radionuclide solubility, * near-field transport processes, * coupled processes in the near-field, * integrated assessments, * sensitivity analyses and validation. There was an invited presentation on each topic followed by an extensive discussion. One of the points highlighted in the closing discussion of the workshop was the need for international cooperation in the field of near-field performance assessment. The general opinion was that this was best achieved in smaller groups discussing specific questions. (au) Separate abstracts were prepared for 9 papers in this volume

  4. The impact of fatigue on the non-technical skills performance of critical care air ambulance clinicians.

    Science.gov (United States)

    Myers, J A; Powell, D M C; Aldington, S; Sim, D; Psirides, A; Hathaway, K; Haney, M F

    2017-11-01

    The relationship between fatigue-related risk and impaired clinical performance is not entirely clear. Non-technical factors represent an important component of clinical performance and may be sensitive to the effects of fatigue. The hypothesis was that the sum score of overall non-technical performance is degraded by fatigue. Nineteen physicians undertook two different simulated air ambulance missions, once when rested, and once when fatigued (randomised crossover design). Trained assessors blinded to participants' fatigue status performed detailed structured assessments based on expected behaviours in four non-technical skills domains: teamwork, situational awareness, task management, and decision making. Participants also provided self-ratings of their performance. The primary endpoint was the sum score of overall non-technical performance. The main finding, the overall non-technical skills performance rating of the clinicians, was better in rested than fatigued states (mean difference with 95% CI, 2.8 [2.2-3.4]). The findings remained consistent across individual non-technical skills domains; also when controlling for an order effect and examining the impact of a number of possible covariates. There was no difference in self-ratings of clinical performance between rested and fatigued states. Non-technical performance of critical care air transfer clinicians is degraded when they are fatigued. Fatigued clinicians may fail to recognise the degree to which their performance is compromised. These findings represent risk to clinical care quality and patient safety in the dynamic and isolated environment of air ambulance transfer. © 2017 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

  5. Computer technique for evaluating collimator performance

    International Nuclear Information System (INIS)

    Rollo, F.D.

    1975-01-01

    A computer program has been developed to theoretically evaluate the overall performance of collimators used with radioisotope scanners and γ cameras. The first step of the program involves the determination of the line spread function (LSF) and geometrical efficiency from the fundamental parameters of the collimator being evaluated. The working equations can be applied to any plane of interest. The resulting LSF is applied to subroutine computer programs which compute corresponding modulation transfer function and contrast efficiency functions. The latter function is then combined with appropriate geometrical efficiency data to determine the performance index function. The overall computer program allows one to predict from the physical parameters of the collimator alone how well the collimator will reproduce various sized spherical voids of activity in the image plane. The collimator performance program can be used to compare the performance of various collimator types, to study the effects of source depth on collimator performance, and to assist in the design of collimators. The theory of the collimator performance equation is discussed, a comparison between the experimental and theoretical LSF values is made, and examples of the application of the technique are presented

  6. Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

    International Nuclear Information System (INIS)

    O'Hara, J.M.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

  7. Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  8. Demand Side Management Performance Evaluation for Commercial Enterprises

    Directory of Open Access Journals (Sweden)

    Jun Dong

    2016-10-01

    Full Text Available Demand Side Management in power systems plays an important role in ensuring a reliable power supply and protecting the environment. Demand Side Management in the commercial sector is vital for sustainable development during China’s industrial restructuring. A hybrid multi-criteria decision making framework for evaluating Demand Side Management performance of commercial enterprises is proposed from a sustainability perspective. A fuzzy Analytic Hierarchy Process is employed to determine the weights of the criteria and a fuzzy technique for order preference by similarity to an ideal solution is applied to rank Demand Side Management performance. An evaluation index system is built, containing economic, social, environmental and technical criteria associated with 15 sub-criteria. Four groups of expert panels from government departments, research institutions, electricity utilities and commercial enterprises gave judgments on criteria weights and criteria performances for alternatives. The effectiveness of the proposed hybrid framework was demonstrated through a case study in Beijing, in which Demand Side Management performances of four alternatives were ranked. Sensitivity analysis results indicate that the hybrid framework is robust.

  9. Method of evaluating the reactor core performance

    International Nuclear Information System (INIS)

    Eguchi, Yumiko.

    1987-01-01

    Purpose: To enable exact evaluation for the core performance in a short period. Constitution: A reactor core is equally divided into 2, 4 or 8 sections considering the structure of the symmetricalness and calculation for the evaluation the core performance is carried out to at least one region of the divided core. However, the reactor core can not be said to be completely symmetrical and there is a difference more or less, because if identical type fuels are loaded the way of burning is different depending on the positions, thereby causing difference in the total heat calorie generated. Accordingly, the performance evaluation is conducted for the entire core at a predetermined time interval, the compensation value for each of the fuels is calculated based on the result of the calculation for the entire core and the corresponding result of the calculation in each of the divided cores and the compensated values are added to the calculation result for the divided cores to compensate the calculated evaluation value. This enables to shorten the calculation time and improve the calculation accuracy. (Yoshino, Y.)

  10. Kicking velocity and physical, technical, tactical match performance for U18 female football players - effect of a new ball

    DEFF Research Database (Denmark)

    Andersen, Thomas B; Bendiksen, Mads; Pedersen, Jens M

    2012-01-01

    We investigated kicking velocity and physical, technical, and tactical match performance for under-18 (U18) female football players and evaluated the effect of using a newly developed lighter smaller ball. Ten regional league teams participated. Maximal ball velocity was 4±1% higher when kicking...... the new ball (NB) compared with the standard ball (SB) in a laboratory testing situation (23.2±0.4 vs. 22.4±0.3 ms(-1); p.05), but lower-limb muscular RPE was lower with NB (4.2±0.4 vs. 5.2±0.3; p.05). High-intensity running decreased (p.05). In conclusion, physiological demands were high in youth female...

  11. Integrated Evaluation Method-Based Technical and Economic Factors for International Oil Exploration Projects

    OpenAIRE

    Rui Guo; Dongkun Luo; Xu Zhao; Jianliang Wang

    2016-01-01

    Optimizing international oil exploration projects is one of the main challenges for oil companies in obtaining investment benefits. This paper establishes an integrated evaluation model to maximize investment benefits within the constraints of technical and economic factors, including geological factors, resource quality, geographic conditions, the investment environment, and oil contracts. The paper also proposes a dynamic calculation method of indicators’ weight associated with oil prices. ...

  12. Technical committee meeting on evaluation of radioactive materials release and sodium fires in fast reactors

    International Nuclear Information System (INIS)

    1996-01-01

    The objectives of the Technical Committee Meeting was to review the activities of research on radioactive materials release and sodium fires in fast reactors in each of the participating countries. It covered: out-of-pile experiments and analysis codes on source term; in-pile experiments on source term; core disruptive accidents; sodium leak experience in liquid metal fast reactors; evaluation of sodium fire; and aerosol behaviour

  13. Technical evaluation of the fertilization of flue cured tobacco farming in campoalegre and garzon, huila

    OpenAIRE

    Hoyos, Verónica; Plaza, Guido

    2014-01-01

    Agricultural production changes constantly and producers have to be able to use resources more efficiently to obtain a greater yield and improve quality at the lowest possible cost. Consequently, the objective of this paper was to carry out a technical evaluation of the fertilization programs for flue-cured tobacco farming in the municipalities of Campoalegre and Garzon, located in the department of Huila, Colombia. Seven treatments, corresponding to six fertilization alternatives (three dosa...

  14. Critical evaluation of the nonradiological environmental technical specifications. Program description, summary, and recommendations. Vol. 1

    International Nuclear Information System (INIS)

    Adams, S.M.; Cunningham, P.A.; Gray, D.D.; Kumar, K.D.; Witten, A.J.

    1976-01-01

    A comprehensive study of the data collected as part of the environmental Technical Specifications program for eight nuclear power plants was conducted for the Office of Nuclear Regulatory Research of the U.S. Nuclear Regulatory commission. This report includes a summary of the screening phase in which the adequacy of the hydrothermal and ecological monitoring data for each plant were evaluated, and the summary and recommendations resulting from a detailed examination of the three nuclear power plants selected in the initial screening

  15. Subjective performance evaluations and employee careers

    DEFF Research Database (Denmark)

    Frederiksen, Anders; Lange, Fabian; Kriechel, Ben

    Firms commonly use supervisor ratings to evaluate employees when objective performance measures are unavailable. Supervisor ratings are subjective and data containing supervisor ratings typically stem from individual firm level data sets. For both these reasons, doubts persist on how useful...... such data are for evaluating theories in personnel economics and whether findings from such data generalize to the labor force at large. In this paper, we examine personnel data from six large companies and establish how subjective ratings, interpreted as ordinal rankings of employees within narrowly...

  16. Teachers’ Performance Evaluation. A New Over View

    Directory of Open Access Journals (Sweden)

    Lic. Alejandro Lema Cachinell

    2016-02-01

    Full Text Available The teacher assessment is an essential category in the institutional work of any University or Technological Institute. Hence the importance of disclosing the systematization that has occurred in studies in the last three decades. These valuations determine the purpose of the following article: analyzing the performance evaluation of teaching from a new perspective at the Higher Institute of Education (ITF in Guayaquil, Ecuador. Different opinions about the process of professional evaluation and ways to check their effectiveness and results are also corroborated.

  17. THE IMPACT OF TECHNICAL ABILITY TO SWIMMING PERFORMANCE OF THE MIXED SWIMMING AT 100m IN COLLEGE FASTO

    Directory of Open Access Journals (Sweden)

    Elvira Beganović

    2011-08-01

    Full Text Available The aim of this study was to determine the impact of technical ability to swim (the starting point, the techniques and turns, within each of these techniques of swimming (freestyle, backstroke, breaststroke and butterfly marked as input or predictor variables, the performance of mixed swimming in the 100m, marked as output or criterion variable. The study was conducted on a sample of 31 students, females, aged from 20-24 years, with the help of the testing (assessment, technical skills of swimming (start, the techniques and turns: OCJKSTR, OCJKTEH, OCJKOKR, OCJLSTR, OCJLTEH, OCJLOKR, OCJPSTR, OCJPTEH, OCJPOKR, OCJDSTR, OCJDTEH, OCJDOKR and mixed swimming in the 100m (OCJPM100, the following order: butterfly, back, breaststroke, freestyle. Analyzing the presented results of regression analysis can be stated that after testing (assessment of all predictor system statistically the most significant impact on the criterion variable had the following variables: assessment techniques freestyle (OCJKTEH, evaluation of starting breast stroke (OCJPSTR and assessment of breast stroke turns (OCJPOKR.

  18. Performance Evaluation Methods for Assistive Robotic Technology

    Science.gov (United States)

    Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

    Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

  19. Analytical Performance Evaluation of Different Switch Solutions

    Directory of Open Access Journals (Sweden)

    Francisco Sans

    2013-01-01

    Full Text Available The virtualization of the network access layer has opened new doors in how we perceive networks. With this virtualization of the network, it is possible to transform a regular PC with several network interface cards into a switch. PC-based switches are becoming an alternative to off-the-shelf switches, since they are cheaper. For this reason, it is important to evaluate the performance of PC-based switches. In this paper, we present a performance evaluation of two PC-based switches, using Open vSwitch and LiSA, and compare their performance with an off-the-shelf Cisco switch. The RTT, throughput, and fairness for UDP are measured for both Ethernet and Fast Ethernet technologies. From this research, we can conclude that the Cisco switch presents the best performance, and both PC-based switches have similar performance. Between Open vSwitch and LiSA, Open vSwitch represents a better choice since it has more features and is currently actively developed.

  20. Analysis of the distances covered and technical actions performed by professional tennis players during official matches.

    Science.gov (United States)

    Pereira, Tiago Julio Costa; Nakamura, Fábio Yuzo; de Jesus, Mayra Tardelli; Vieira, Claudio Luís Roveri; Misuta, Milton Shoiti; de Barros, Ricardo Machado Leite; Moura, Felipe Arruda

    2017-02-01

    The purpose of this study was to analyse the physical and technical performances of professional tennis players during official matches. The trajectories of eight players were obtained during matches, using an automatic tracking method. The distances covered and technical performances were analysed for the first and second sets. The athletes covered (mean ± standard deviation) a total of 1702.4 ± 448.2 m in the first set, 1457.6 ± 678.1 m in the second set and 3160.0 ± 880.1 in the entire match. No differences were found between the sets for the physical variables (lateral and forward displacements, distance covered per rally, per game and per set, and the percentage of time spent in each range of velocity). However, the distances covered by the athletes during the rallies in which they were serving (median = 5.2; interquartile range (IQR) = 6.7 m) were statistically smaller than when they were returning (median = 6.2; IQR = 7.7 m). Forehand ground stroke proficiency decreased from the first (mean ± standard deviation: 75.2 ± 4.11%) to the second set (mean ± standard deviation = 65.5 ± 14.3%). In conclusion, tennis players did not present reduced physical performance from the first to the second set.

  1. Effects of consecutive days of match play on technical performance in tennis.

    Science.gov (United States)

    Gescheit, Danielle T; Duffield, Rob; Skein, Melissa; Brydon, Neil; Cormack, Stuart J; Reid, Machar

    2017-10-01

    Elite tennis is characterised by repeated bouts of up to 5-set match play, yet little is known about the technical requirements of shots played. This study therefore investigated technical performance changes over consecutive days of prolonged, simulated tennis match play. A total of 7 well-trained men tennis players performed 4 consecutive days of competitive 4-h match play. Matches were notated to determine between-day changes in groundstroke and serve performance, as well as point and match durations. Changes ≥75% likely to exceed the smallest important effect size (0.2) were considered meaningful and represented as effect size ± 90% confidence interval. Effective playing time reduced on days 3 and 4, alongside likely increases in "stretch" groundstrokes over the 4 days (mean effect size ± 90% confidence interval; 0.57 ± 0.38) and "stretch" backhand returns on days 2 and 3 (0.39 ± 0.54 and 0.67 ± 0.55). Relative unforced errors increased on day 4 (vs. day 2; 0.36 ± 0.22) and second-serve winning percentage reduced after day 1 (-0.47 ± 0.50). Further, a likely increase in emotional outbursts characterised day 3 (vs. day 2; 0.73 ± 0.57). Consecutive-day match play impairs hitting accuracy, stroke positioning and emotional responses; an understanding of which prepares players for elite-standard tennis tournament play.

  2. Markets, Availability, Notice, and Technical Performance of Terahertz Systems: Historic Development, Present, and Trends

    Science.gov (United States)

    Hochrein, Thomas

    2015-03-01

    Although a lot of work has already been done under the older terms "far infrared" or "sub-millimeter waves", the term "terahertz" stands for a novel technique offering many potential applications. The latter term also represents a new generation of systems with the opportunity for coherent, time-resolved detection. In addition to the well-known technical opportunities, an historical examination of Internet usage, as well as the number of publications and patent applications, confirms ongoing interest in this technique. These activities' annual growth rate is between 9 % and 21 %. The geographical distribution shows the center of terahertz activities. A shift from the scientific to more application-oriented research can be observed. We present a survey among worldwide terahertz suppliers with special focus on the European region and the use of terahertz systems in the field of measurement and analytical applications. This reveals the current state of terahertz systems' commercial and geographical availability as well as their costs, target markets, and technical performance. Component cost distribution using the example of an optical pulsed time-domain terahertz system gives an impression of the prevailing cost structure. The predication regarding prospective market development, decreasing system costs and higher availability shows a convenient situation for potential users and interested customers. The causes are primarily increased competition and larger quantities in the future.

  3. Containment Emergency Sump Performance. Technical findings related to Unresolved Safety Issue A-43. Revision 1

    International Nuclear Information System (INIS)

    1985-10-01

    This report summarizes key technical findings related to Unresolved Safety Issue (USI) A-43, Containment Emergency Sump Performance. Both BWRs and PWRs are considered in this report. Emergency core cooling systems require a clean, reliable water source to maintain long-term recirculation following a loss-of-coolant accident (LOCA). PWRs rely on the containment emergency sump to provide such a water supply to residual heat removal pumps and containment spray pumps. BWRs rely on pump suction intakes in the suppression pool or wet well to provide water to residual heat removal and core spray systems. Thus, the technical findings in this report provide information on post-LOCA recirculation. These findings have been derived from extensive experimental studies, generic plant studies, and assessments of sumps used for long-term cooling. Results of hydraulic tests have shown that the potential for air ingestion is less severe than previously hypothesized. The effects of debris blockage on NPSH margin must be dealt with on a plant-specific basis. These findings have been used to develop revisions to Regulatory Guide 1.82 and Standard Review Plan Section 6.2.2 (NUREG-0800)

  4. Performance Evaluation of Tree Object Matching

    DEFF Research Database (Denmark)

    Somchaipeng, Kerawit; Sporring, Jon; Kreiborg, Sven

    2005-01-01

    of the algorithm is presented: an exact and an approximation. Several experiments are conducted to empirically evaluate the MSST matching algorithm under image distortions. Further, the performance of the MSST matching algorithm is measured on three databases: the ORL face database, magazine covers, and the COIL......Multi-Scale Singularity Trees (MSSTs) represents the deep structure of images in scale-space and provide both the connections between image features at different scales and their strengths. In this report we present and evaluate an algorithm that exploits the MSSTs for image matching. Two versions...... database. Finally the performance is compared with algorithms based on the Scale Invariant Feature Transform (SIFT), and the Position of Catastrophes (CAT)....

  5. An evaluation of client satisfaction with training programs and technical assistance provided by Florida's Coordinated School Health Program Office.

    Science.gov (United States)

    Weiler, R M; Pigg, R M

    2000-11-01

    Client or customer satisfaction surveys assess the perceived quality of programs, products, services, and employee performance. Such assessments prove beneficial for evaluation and planning purposes. This survey examined the satisfaction of clients using the programs, services, and technical assistance provided through the Coordinated School Health Program Office (CSHPO) in the Florida Department of Education. Using the 42-item Client Satisfaction Survey, data were collected in summer 1999 from 300 of 574 clients (52.3%) who attended training sessions or sought technical assistance from CSHPO during 1996-1999. More than two-thirds (67.2%) of clients rated the training program as "very good" or "excellent" at increasing their understanding about the concept of a coordinated school health program. Overall, 69.7% of clients rated the training programs they attended as "very good" or "excellent." Resource materials and staff effectiveness rated positively as well. Findings confirmed client satisfaction with CSHPO's training programs, technical assistance, and staff. Information obtained through the client satisfaction survey can be used by CSHPO to assist in future program planning and resource allocations.

  6. Measurement and Evaluation of ENUM Server Performance

    OpenAIRE

    Shen, Charles; Schulzrinne, Henning

    2008-01-01

    ENUM is a DNS-based protocol standard for mapping E.164 telephone numbers to Internet Uniform Resource Identifiers (URIs). It places unique requirements on the existing DNS infrastructure, such as data scalability, query throughput, response time, and database update rates. This paper measures and evaluates the performance of existing name server implementation as ENUM servers. We compared PowerDNS (PDNS), BIND and Navitas. Results show that BIND is not suitable for ENUM due to its poor scali...

  7. Metrics for Offline Evaluation of Prognostic Performance

    Directory of Open Access Journals (Sweden)

    Sankalita Saha

    2010-01-01

    Full Text Available Prognostic performance evaluation has gained significant attention in the past few years.Currently, prognostics concepts lack standard definitions and suffer from ambiguous and inconsistent interpretations. This lack of standards is in part due to the varied end-user requirements for different applications, time scales, available information, domain dynamics, etc. to name a few. The research community has used a variety of metrics largely based on convenience and their respective requirements. Very little attention has been focused on establishing a standardized approach to compare different efforts. This paper presents several new evaluation metrics tailored for prognostics that were recently introduced and were shown to effectively evaluate various algorithms as compared to other conventional metrics. Specifically, this paper presents a detailed discussion on how these metrics should be interpreted and used. These metrics have the capability of incorporating probabilistic uncertainty estimates from prognostic algorithms. In addition to quantitative assessment they also offer a comprehensive visual perspective that can be used in designing the prognostic system. Several methods are suggested to customize these metrics for different applications. Guidelines are provided to help choose one method over another based on distribution characteristics. Various issues faced by prognostics and its performance evaluation are discussed followed by a formal notational framework to help standardize subsequent developments.

  8. New Metrics for Evaluating Technical Benefits and Risks of DGs Increasing Penetration

    DEFF Research Database (Denmark)

    Akbari, Mohammad Amin; Aghaei, Jamshid; Barani, Mostafa

    2017-01-01

    Increasing penetration of distributed generation (DG), may be interesting from several points of view, but it raises important challenges about distribution system operation and planning practices. To optimal allocation of DG, which play an important role in construction of microgrids, the benefits...... and risks should be qualified and quantified. This paper introduces several probabilistic indices to evaluate the potential operational effects of increasing penetration of renewable DG units such as wind power and photovoltaic on rural distribution network with the aid of evaluating technical benefits...

  9. Report on the IAEA technical meeting on database of evaluated cross sections for ion beam applications

    International Nuclear Information System (INIS)

    Vickridge, I.C.; Schwerer, O.

    2003-11-01

    Results of the IAEA Technical Meeting on Database of Evaluated Cross Sections for Ion Beam Applications held at the IAEA Headquarters, Vienna, Austria, 29 to 30 October 2003, are summarized in this report. The meeting discussed the nuclear data needs for ion beam analysis and produced recommendations concerning the compilation, assessment and evaluation of cross section data for ion beam analysis, as well as the related databases and their formats and their inclusion in the data collections of the IAEA Nuclear Data Section. (author)

  10. Strategic performance evaluation in cancer centers.

    Science.gov (United States)

    Delgado, Rigoberto I; Langabeer, James R

    2009-01-01

    Most research in healthcare strategy has focused on formulating or implementing organizational plans and strategies, and little attention has been dedicated to the post-implementation control and evaluation of strategy, which we contend is the most critical aspect of achieving organizational goals. The objective of this study was to identify strategic control approaches used by major cancer centers in the country and to relate these practices to financial performance. Our intent was to expand the theory and practice of healthcare strategy to focused services, such as oncology. We designed a 17-question survey to capture elements of strategy and performance from our study sample, which comprised major cancer hospitals in the United States and shared similar mandates and resource constraints. The results suggest that high-performing cancer centers use more sophisticated analytical approaches, invest greater financial resources in performance analysis, and conduct more frequent performance reviews than do low-performing organizations. Our conclusions point to the need for a more robust approach to strategic assessment. In this article, we offer a number of recommendations for management to achieve strategic plans and goals on the basis of our research. To our knowledge, this study is one of the first to concentrate on the area of strategic control.

  11. Technical methods for a risk-informed, performance-based fire protection program at nuclear power plants

    International Nuclear Information System (INIS)

    Dey, M.K.

    1998-01-01

    This paper presents a technical review and examination of technical methods that are available for developing a risk-informed, performance-based fire protection program at a nuclear plant. The technical methods include ''engineering tools'' for examining the fire dynamics of fire protection problems, reliability techniques for establishing an optimal fire protection surveillance program, fire computer codes for analyzing important fire protection safety parameters, and risk-informed approaches that can range from drawing qualitative insights from risk information to quantifying the risk impact of alternative fire protection approaches. Based on this technical review and examination, it is concluded that methods for modeling fires, and reliability and fire PRA analyses are currently available to support the initial implementation of simple risk-informed, performance-based approaches in fire protection programs. (author)

  12. Alkali-Activated Mortars for Sustainable Building Solutions: Effect of Binder Composition on Technical Performance

    Directory of Open Access Journals (Sweden)

    Agnese Attanasio

    2018-02-01

    Full Text Available There is a growing interest in the construction sector in the use of sustainable binders as an alternative to ordinary Portland cement, the production of which is highly impacting on the environment, due to high carbon dioxide emissions and energy consumption. Alkali-activated binders, especially those resulting from low-cost industrial by-products, such as coal fly ash or metallurgical slag, represent a sustainable option for cement replacement, though their use is more challenging, due to some technological issues related to workability or curing conditions. This paper presents sustainable alkali-activated mortars cured in room conditions and based on metakaolin, fly ash, and furnace slag (both by-products resulting from local sources and relevant blends, aiming at their real scale application in the building sector. The effect of binder composition—gradually adjusted taking into consideration technical and environmental aspects (use of industrial by-products in place of natural materials in the view of resources saving—on the performance (workability, compressive strength of different mortar formulations, is discussed in detail. Some guidelines for the design of cement-free binders are given, taking into consideration the effect of each investigated alumino-silicate component. The technical feasibility to produce the mortars with standard procedures and equipment, the curing in room conditions, the promising results achieved in terms of workability and mechanical performance (from 20.0 MPa up to 52.0 MPa, confirm the potential of such materials for practical applications (masonry mortars of class M20 and Md. The cement-free binders resulting from this study can be used as reference for the development of mortars and concrete formulations for sustainable building materials production.

  13. Radiographic Assessment of the Technical Quality and Periapical Health of Root-Filled Teeth Performed by General Practitioners in a Turkish Subpopulation

    Directory of Open Access Journals (Sweden)

    E. Tarim Ertas

    2013-01-01

    Full Text Available Aim. The aim of this study was to evaluate by means of radiographs the technical quality of root fillings performed by dental practitioners. Methods and Material. Standardized periapical radiographs were made on 484 patients who received endodontic treatment in private practice. A total of 831 endodontically treated teeth with 1448 roots were evaluated for technical quality of the root canal filling and the periapical status of the teeth. Also, the apical status of each root-filled tooth was assessed according to the length, density, and taper of root fillings, and the presence of apical transportation, broken root instruments, and overfilled sealer or gutta-percha material was recorded for each root canal. Results. Of the endodontically treated teeth 26.6% had healthy periapical tissues, while technically good endodontic treatment constituted 12.8%. Based on the treatment success, there was no significant difference between the tooth groups. Statistical analysis of the data did not demonstrate statistically significant differences between the various parameters that were evaluated (. Conclusions. Technical quality of root fillings in a population who received treatment in private practice was poor and was consistent with a low prevalence of apical health. The probable reasons for this failure are multifactorial and may be improved if the operators improve their skills with continuing postgraduate education programs.

  14. The concurrent validity of the technical test battery as an indicator of work performance in a telecommunications company

    Directory of Open Access Journals (Sweden)

    Marelize Barnard

    2005-10-01

    Full Text Available The purpose of this study was to assess the concurrent validity of the Technical Test Battery (TTB in a South African telecommunications institution. The Technical Test Battery (TTB was administered to a sample of 107 technical officers. Their test scores were compared to the scores obtained from a job performance rating scale specifically designed for this position on the basis of a thorough job analysis. The TTB demonstrated high concurrent validity as an indicator of work performance for technical posts in the telecommunications environment. These results suggest that the TTB may have a high predictive validity for performance in technical positions. The findings and implications of the study are discussed. Opsomming Die doel van hierdie studie was om die samevallende geldigheid van die “Technical Test Battery (TTB�? in ’n Suid-Afrikaanse telekommunikasie instansie te bepaal. Die TTB is op ’n steekproef van 107 tegniese personeel toegepas. Die toetstellings is in verband gebring met die tellings van ’n werksprestasiemaatstaf wat spesifiek vir die pos ontwikkel is op grond van ’n deeglike posanalise. Daar is bevind dat die TTB ’n hoë samevallende geldigheid as aanduider van werksprestasie vir tegniese poste in the telekommunikasiebedryf toon. Dié resultate dui op ’n sterk moontlikheid dat die TTB ’n goeie voorspeller van werksprestasie vir tegniese beroepe kan wees. Die bevindinge en implikasies van die studie word bespreek.

  15. An assessment of radiographers’ technical and protective performance in hospitals affiliated to Birjand University of Medical Sciences in 2012

    Directory of Open Access Journals (Sweden)

    Mahmood Reza Tavakkoli

    2014-08-01

    Materials and Methods: In this descriptive-analytical study, all the 26 radiolographers working in the radiology wards of Vali-asr and Imam Reza hospitals of Birjand participated. In order to collect data about their performance, a checklist whose reliability and validity had been approved was provided. For the radiography staff 17 technical and 12 protective items during three work shifts were checked and recorded. In order to measure their awareness of technical and protective principles, a 12-item questionnaire was completed by each of them. The obtained data was statistically analyzed by means of SPSS software using X2. Results: Mean Performance score in the technical area in the three work shifts was 15±1.60, and that of the protective area was 10.9±1.1 both of which were at an average level. Around 46.5% of the subjects gave correct answers to protective and 37.2% of them to the technical questions. The comparison of technical and protective performance scores showed no significant difference in terms of work shifts, education, gender, and type of employment (P>0.05. Conclusion: The radiographers’ awareness of technical and protective principles was at a very low level. Therefore, both quality academic training and in-service education seem necessary.

  16. Evaluation of the Scrub Practitioners' List of Intraoperative Non-Technical Skills system.

    Science.gov (United States)

    Mitchell, Lucy; Flin, Rhona; Yule, Steven; Mitchell, Janet; Coutts, Kathy; Youngson, George

    2012-02-01

    The Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) system is a new tool for training and assessing scrub practitioner (nurse, technician) behaviours during surgical operations. The aim of the study was to test the psychometric properties including inter-rater reliability of the prototype SPLINTS behavioural rating system. Experienced scrub practitioners (n=34) attended a one-day session where they received background training in human factors and non-technical skills and were also trained to use the SPLINTS system. They then used SPLINTS to rate the scrub practitioners' non-technical skill performance in seven standardized simulated, surgical scenarios. Reliability, measured by within-group agreement (r(wg)) for the three skill categories and six out of nine elements, was acceptable (r(wg)>0.7). Participants were within one scale point of expert ratings in >90% of skill categories and elements, and could use SPLINTS to score performance with a reasonable level of accuracy. There was good internal consistency of the system: absolute mean difference was Mtechnical skills in simulated, standardized, video scenarios. On the basis of these results, the system can now move on to usability testing in the real operating theatre. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Evaluation of models in performance assessment

    International Nuclear Information System (INIS)

    Dormuth, K.W.

    1993-01-01

    The reliability of models used for performance assessment for high-level waste repositories is a key factor in making decisions regarding the management of high-level waste. Model reliability may be viewed as a measure of the confidence that regulators and others have in the use of these models to provide information for decision making. The degree of reliability required for the models will increase as implementation of disposal proceeds and decisions become increasingly important to safety. Evaluation of the models by using observations of real systems provides information that assists the assessment analysts and reviewers in establishing confidence in the conclusions reached in the assessment. A continuing process of model calibration, evaluation, and refinement should lead to increasing reliability of models as implementation proceeds. However, uncertainty in the model predictions cannot be eliminated, so decisions will always be made under some uncertainty. Examples from the Canadian program illustrate the process of model evaluation using observations of real systems and its relationship to performance assessment. 21 refs., 2 figs

  18. Performance evaluation of an automotive thermoelectric generator

    Science.gov (United States)

    Dubitsky, Andrei O.

    Around 40% of the total fuel energy in typical internal combustion engines (ICEs) is rejected to the environment in the form of exhaust gas waste heat. Efficient recovery of this waste heat in automobiles can promise a fuel economy improvement of 5%. The thermal energy can be harvested through thermoelectric generators (TEGs) utilizing the Seebeck effect. In the present work, a versatile test bench has been designed and built in order to simulate conditions found on test vehicles. This allows experimental performance evaluation and model validation of automotive thermoelectric generators. An electrically heated exhaust gas circuit and a circulator based coolant loop enable integrated system testing of hot and cold side heat exchangers, thermoelectric modules (TEMs), and thermal interface materials at various scales. A transient thermal model of the coolant loop was created in order to design a system which can maintain constant coolant temperature under variable heat input. Additionally, as electrical heaters cannot match the transient response of an ICE, modelling was completed in order to design a relaxed exhaust flow and temperature history utilizing the system thermal lag. This profile reduced required heating power and gas flow rates by over 50%. The test bench was used to evaluate a DOE/GM initial prototype automotive TEG and validate analytical performance models. The maximum electrical power generation was found to be 54 W with a thermal conversion efficiency of 1.8%. It has been found that thermal interface management is critical for achieving maximum system performance, with novel designs being considered for further improvement.

  19. Technical Bases to Consider for Performance and Demonstration Testing of Space Fission Reactors

    International Nuclear Information System (INIS)

    Hixson, Laurie L.; Houts, Michael G.; Clement, Steven D.

    2004-01-01

    Performance and demonstration testing are critical to the success of a space fission reactor program. However, the type and extent to which testing of space reactors should be performed has been a point of discussion within the industry for many years. With regard to full power ground nuclear tests, questions such as 'Do the benefits outweigh the risks? Are there equivalent alternatives? Can a test facility be constructed (or modified) in a reasonable amount of time? Will the test article accurately represent the flight system? Are the costs too restrictive?' have been debated for decades. There are obvious benefits of full power ground nuclear testing such as obtaining systems integrated reliability data on a full-scale, complete end-to-end system. But these benefits come at some programmatic risk. In addition, this type of testing does not address safety related issues. This paper will discuss and assess these and other technical considerations essential in deciding which type of performance and demonstration testing to conduct on space fission reactor systems. (authors)

  20. Evaluating iterative reconstruction performance in computed tomography.

    Science.gov (United States)

    Chen, Baiyu; Ramirez Giraldo, Juan Carlos; Solomon, Justin; Samei, Ehsan

    2014-12-01

    Iterative reconstruction (IR) offers notable advantages in computed tomography (CT). However, its performance characterization is complicated by its potentially nonlinear behavior, impacting performance in terms of specific tasks. This study aimed to evaluate the performance of IR with both task-specific and task-generic strategies. The performance of IR in CT was mathematically assessed with an observer model that predicted the detection accuracy in terms of the detectability index (d'). d' was calculated based on the properties of the image noise and resolution, the observer, and the detection task. The characterizations of image noise and resolution were extended to accommodate the nonlinearity of IR. A library of tasks was mathematically modeled at a range of sizes (radius 1-4 mm), contrast levels (10-100 HU), and edge profiles (sharp and soft). Unique d' values were calculated for each task with respect to five radiation exposure levels (volume CT dose index, CTDIvol: 3.4-64.8 mGy) and four reconstruction algorithms (filtered backprojection reconstruction, FBP; iterative reconstruction in imaging space, IRIS; and sinogram affirmed iterative reconstruction with strengths of 3 and 5, SAFIRE3 and SAFIRE5; all provided by Siemens Healthcare, Forchheim, Germany). The d' values were translated into the areas under the receiver operating characteristic curve (AUC) to represent human observer performance. For each task and reconstruction algorithm, a threshold dose was derived as the minimum dose required to achieve a threshold AUC of 0.9. A task-specific dose reduction potential of IR was calculated as the difference between the threshold doses for IR and FBP. A task-generic comparison was further made between IR and FBP in terms of the percent of all tasks yielding an AUC higher than the threshold. IR required less dose than FBP to achieve the threshold AUC. In general, SAFIRE5 showed the most significant dose reduction potentials (11-54 mGy, 77%-84%), followed by

  1. Scoping evaluation of the technical capabilities of DOE sites for disposal of hazardous metals in mixed low-level waste

    International Nuclear Information System (INIS)

    Gruebel, M.M.; Waters, R.D.; Langkopf, B.S.

    1997-05-01

    A team of analysts designed and conducted a scoping evaluation to estimate the technical capabilities of fifteen Department of Energy sites for disposal of the hazardous metals in mixed low-level waste (i.e., waste that contains both low-level radioactive materials and hazardous constituents). Eight hazardous metals were evaluated: arsenic, barium, cadmium, chromium, lead, mercury, selenium, and silver. The analysis considered transport only through the groundwater pathway. The results are reported as site-specific estimates of maximum concentrations of each hazardous metal in treated mixed low-level waste that do not exceed the performance measures established for the analysis. Also reported are site-specific estimates of travel times of each hazardous metal to the point of compliance

  2. A performance evaluation of personnel identity verifiers

    International Nuclear Information System (INIS)

    Maxwell, R.L.; Wright, L.J.

    1987-01-01

    Personnel identity verification devices, which are based on the examination and assessment of a body feature or a unique repeatable personal action, are steadily improving. These biometric devices are becoming more practical with respect to accuracy, speed, user compatibility, reliability and cost, but more development is necessary to satisfy the varied and sometimes ill-defined future requirements of the security industry. In an attempt to maintain an awareness of the availability and the capabilities of identity verifiers for the DOE security community, Sandia Laboratories continues to comparatively evaluate the capabilities and improvements of developing devices. An evaluation of several recently available verifiers is discussed in this paper. Operating environments and procedures more typical of physical access control use can reveal performance substantially different from the basic laboratory tests

  3. Technical basis for evaluating electromagnetic and radio-frequency interference in safety-related I ampersand C systems

    International Nuclear Information System (INIS)

    Ewing, P.D.; Korsah, K.

    1994-04-01

    This report discusses the development of the technical basis for the control of upsets and malfunctions in safety-related instrumentation and control (I ampersand C) systems caused by electromagnetic and radio-frequency interference (EMI/RFI) and power surges. The research was performed at the Oak Ridge National Laboratory (ORNL) and was sponsored by the USNRC Office of Nuclear Regulatory Research (RES). The motivation for research stems from the safety-related issues that need to be addressed with the application of advanced I ampersand C systems to nuclear power plants. Development of the technical basis centered around establishing good engineering practices to ensure that sufficient levels of electromagnetic compatibility (EMC) are maintained between the nuclear power plant's electronic and electromechanical systems known to be the source(s) of EMI/RFI and power surges. First, good EMC design and installation practices need to be established to control the impact of interference sources on nearby circuits and systems. These EMC good practices include circuit layouts, terminations, filtering, grounding, bonding, shielding, and adequate physical separation. Second, an EMI/RFI test and evaluation program needs to be established to outline the tests to be performed, the associated test methods to be followed, and carefully formulated acceptance criteria based on the intended environment to ensure that the circuit or system under test meets the recommended guidelines. Third, a program needs to be developed to perform confirmatory tests and evaluate the surge withstand capability (SWC) and of I ampersand C equipment connected to or installed in the vicinity of power circuits within the nuclear power plant. By following these three steps, the design and operability of safety-related I ampersand C systems against EMI/RFI and power surges can be evaluated, acceptance criteria can be developed, and appropriate regulatory guidance can be provided

  4. Performance evaluation of computer and communication systems

    CERN Document Server

    Le Boudec, Jean-Yves

    2011-01-01

    … written by a scientist successful in performance evaluation, it is based on his experience and provides many ideas not only to laymen entering the field, but also to practitioners looking for inspiration. The work can be read systematically as a textbook on how to model and test the derived hypotheses on the basis of simulations. Also, separate parts can be studied, as the chapters are self-contained. … the book can be successfully used either for self-study or as a supplementary book for a lecture. I believe that different types of readers will like it: practicing engineers and resea

  5. Irradiation and performance evaluation of DUPIC fuel

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Ki Kwang; Yang, M. S.; Song, K. C. [and others

    2000-05-01

    The objectives of the project is to establish the performance evaluation system for the experimental verification of DUPIC fuel. The scope and content for successful accomplishment of the phase 1 objectives is established as follows : irradiation test of DUPIC fuel at HANARO using a noninstrument capsule, study on the characteristics of DUPIC pellets, development of the analysis technology on the thermal behaviour of DUPIC fuel, basic design of a instrument capsule. The R and D results of the phase 1 are summarized as follows : - Performance analysis technology development of DUPIC fuel by model development for DUPIC fuel, review on the extendability of code(FEMAXI-IV, FRAPCON-3, ELESTRESS). - Study on physical properties of DUPIC fuel by design and fabrication of the equipment for measuring the thermal property. - HANARO irradiation test of simulated DUPIC fuel by the noninstrument capsule development. - PIE and result analysis.

  6. Evaluation of PET count rate performance

    International Nuclear Information System (INIS)

    Knoop, B.O.; Jordan, K.; Spinks, T.

    1989-01-01

    A proposal is made for the test conditions to evaluate PET count rate performance. This performance depends in a complex manner on the spatial distribution of activity and scattering material. Therefore, a combined body phantom is proposed, which is as simple as possible but which adequately simulates the range of clinical application of a whole body tomograph. Taking into account the special properties of the new block detector design, a comprehensive test procedure is developed. This includes not only the common count rate characteristic, but also checks for the precision of randoms estimation and count loss correction schemes, and for the occurence of pulse pile up. This is done for different source and scatter configurations, simulating brain, cardiac, and abdominal imaging, respectively. Examples are given, based on measurements of the latest generation PET scanners, namely the CTI PT 931/08-12 and the Scanditronix PC 2048-07WB. (orig.)

  7. Technical Evaluation Report 30: Vendor-Assisted Evaluation of a Learning Management System

    Directory of Open Access Journals (Sweden)

    Adrienne De Schutter

    2004-04-01

    Full Text Available A product evaluation was conducted of Desire2Learn, an online learning management system gaining popularity in educational institutions. Since an online trial version of the software was not available for evaluation, an inspection meeting with the vendor was arranged. This provided the evaluation team with an opportunity to examine the precautions necessary for ensuring the objectivity of a product evaluation based on vendor-supplied information. The report outlines the team’s use of evaluator-driven enquiry and a triangulated approach to information checking. The Desire2Learn product is assessed as a flexible and useful addition to the range of learning management system options.

  8. Performance evaluation on vacuum pumps using nanolubricants

    Energy Technology Data Exchange (ETDEWEB)

    Lue, Yeou Feng; Hsu, Yu Chun; Teng, Tun Ping [Dept. of Industrial EducationNational Taiwan Normal University, Taiwan (China)

    2016-09-15

    This study produced alumina (Al{sub 2}O{sub 3}) nanovacuum-pump lubricants (NVALs) by involving the dispersion of Al{sub 2}O{sub 3} nanoparticles in a vacuum-pump lubricant (VAL) with oleic as a dispersant. Experiments were conducted to evaluate the suspension performance, thermal conductivity, viscosity, specific heat, tribological performance and vacuum-pump performance of the NVALs. The experimental results obtained from the vacuum-pump performance tests show that the NVALs with Al{sub 2}O{sub 3} concentration of 0.2 wt.% and oleic concentration of 0.025 wt.% yielded the lowest electricity consumption, conserving 2.39% of electricity compared with the VAL. No marked difference was observed between the temperatures of the vacuum pump using VAL and NVAL. Furthermore, evacuation (i.e., the minimal pressure of -99.5 kPa) was reached faster by the vacuum pump with the NVALs, and the evacuation time could be reduced by 4.91% under optimal conditions. In addition, the vacuum pump with the NVALs exhibited superior overall effectiveness under relatively lower ambient temperatures.

  9. Monitoring and Evaluating Government Performance in Botswana

    Directory of Open Access Journals (Sweden)

    E. K. Botlhale

    2015-03-01

    Full Text Available In an era characterised by fiscal stress in the post-global recession era, clichés such as ‘bang for the buck’ are commonplace. Governments are under increasing pressure to spend limited public resources in efficient and  effective ways. Efficient and  effective governments are a necessary, though not sufficient, condition for economic development. Hence, governments have adopted performance-improving interventions such as New Public Management. Botswana jumped into the bandwagon of public sector reforms in the 1990s through interventions such as Performance-based Management Systems. The focus was almost entirely on performance enhancement to the neglect of performance measurement through a result-based Monitoring and Evaluation (M&E framework. However, in 2009, the government decided to mainstream M&E into the development planning regime. Since the M&E tool is still in draft form, Botswana is very favourably circumstanced to learn from others. Meanwhile essentials to do are: attitudinal change, shared vision on M&E, stakeholder management and demand and use of M&E information by policy-makers such as Members of Parliament.

  10. Technical Evaluation of Sprinkler Irrigation Systems which were Implemented in Tea Fields of the Guilan Province

    Directory of Open Access Journals (Sweden)

    kourosh majdsalimi

    2016-02-01

    Full Text Available Introduction: Designing and management of sprinkler irrigation systems depend on the situation and location of its implementation and often rely on professional and long-term tests (9. Having a good irrigation system depends on knowledge of the relationship between soil, water, plants, irrigation scheduling, the required amount of irrigation water to the water-holding capacity of soil, climate and plant growth (6.The less use of sprinkler irrigation systems and less performed research projects in the Guilan province, lack of correct design parameters due to shortage of the required parameters for local and regional planning, has led to reliance on charts and tables. Therefore, planning water resources cannot be performed well and with accurate details. According to many researchers (8, the technical evaluation should be a regular and short-term process to review the problems and possible performance of irrigation systems. Merriam and Keller (10 defined the assessment of an irrigation system analysis, based on field measurements in real terms during the normal work of the system. Therefore, to develop these systems over the next few years, it is essential to evaluate the use of irrigation systems and review the performance of existing problems and utilizing the results to improve it. The aim of this study was to assess the current status of implemented irrigation systems in the tea plantations of Guilan and evaluate their performance. Materials and Methods: In this study, six classic sprinkler irrigation systems in tea fields of Guilan province were evaluated during two years. Sprinkler irrigation systems of semi-portable, solid-set and solid-set (hand-move sprinkler were selected randomly. To evaluate this irrigation systems, Christiansen’s uniformity coefficient (CU, distribution uniformity (DU, potential application efficiency of low-quarter (PELQ and application efficiency of low-quarter (AELQ in the form of trial blocks were estimated by

  11. Technical skills acquisition in surgery-bound senior medical students: an evaluation of student assertiveness.

    Science.gov (United States)

    Talbott, Vanessa A; Marks, Joshua A; Bodzin, Adam S; Comeau, Jason A; Maxwell, Pinckney J; Isenberg, Gerald A; Martin, Niels D

    2012-01-01

    To prepare students pursuing surgical careers, we devised a senior subinternship curriculum supplement that focused on the acquisition of technical skills required of surgical residents. We hypothesized that more assertive students, those that accomplished more of the curriculum, would perform better on a technical skills Objective Structured Clinical Examination (OSCE). Senior medical students rotating on their first general surgery subinternship were administered a 6-station OSCE on the first day of their subinternship and again during the final week of the month-long rotation. A self-directed, 38-task "scavenger hunt" representing common intern level clinical skills, procedures, and patient care activities was provided to each student. The study was performed at Jefferson Medical College, a large, private medical school in Philadelphia, PA. Forty-nine senior students completed surgical subinternships between July 2009 and September 2010, and participated both in the pre-/post-OSCEs and the scavenger hunt. Students performed significantly better on the post-rotation OSCE than on the pre-rotation OSCE; 70.2% ± 8.1% vs. 60.4% ± 12.0%, p Assertiveness scores from the "scavenger hunt" did not correlate with final OSCE scores (r = -0.328, p = 0.25), and were negatively correlated with the change between pre- and post-OSCE scores (r = -0.573, p assertiveness scores were determined by the number of tasks completed over the course of the rotation. As surgical education becomes more streamlined with evolving work hour restrictions, medical school education is playing an increasingly pivotal role in preparing students for internship. In our study, individual assertiveness in completing structured self-directed learning tasks did not directly predict the acquisition of proficiency in technical skills. We feel assertiveness is overshadowed by other factors that may carry more weight in terms of technical skills acquisition. Further studies are required to delineate these

  12. FY 2016 Grant Announcement: FY 2016 Technical Analysis and Programmatic Evaluation Support to the Chesapeake Bay Program Partnership

    Science.gov (United States)

    The U.S. Environmental Protection Agency’s Chesapeake Bay Program Office is announcing a Request for Proposals for applicants to provide the Chesapeake Bay Program partners with a proposal(s) for providing technical analysis and programmatic evaluation

  13. Topical Metered-dosing Dispenser Performance Evaluation.

    Science.gov (United States)

    Liu, Qiang; Kupiec, Thomas C; Vu, Nicole T

    2016-01-01

    Topical metered-dosing dispensers are designed for dosing accuracy and ease-of-use by the patients while protecting the packaged products from environmental exposure and contamination. The objective of this study was to evaluate the accuracy, precision, and residual of available topical metered-dosing dispensers with different types of topical cream for practical application. Triplicate samples of five different dispensers were tested. This test was completed using three types of commercial topical cream-bases of dissimilar Total Active Pharmaceutical Ingredient Load Percentages, Transdermal Penetration Percentages, and Specific Gravities. The dispensers were evaluated according to specified dose-uniformity criteria for a total dispensing capacity of 30 mL at 0.5 mL per dose for 60 doses. The study shows Topi-CLICK performed with the best precision and accuracy of dosing in comparison to the airless-pump type dispensers. While the dispensing was highly variable with airless pumps and may require calibration for each packaged product, remarkably the performance of Topi-CLICK was not affected by different types of cream-bases and does not require additional metering calibration. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  14. The Agency's Technical Co-operation programme in Chile, 1981-1991. Country programme evaluation

    International Nuclear Information System (INIS)

    1992-01-01

    Agency support for nuclear activities in Chile dates back to the early 1960s. During the last ten years, the period covered by this evaluation, this support has considerably expanded. In the period 1981-1991, 62 Agency projects with allotments amounting to over $7 million were completed or are under implementation. Through this co-operation Chile has received 360 man-months of expert services, $3.4 million worth of equipment, and 105 fellowships for some 390 man-months of training. In addition, 262 Chileans attended 219 Agency regional and interregional training courses, and Chilean institutions were awarded 40 research contracts worth over $325,000. This evaluation covers ten years of Agency technical co-operation with Chile, during which 35 projects were completed and 27 are still being implemented. Eight major sectors received assistance: general atomic energy development; nuclear physics; nuclear raw materials; nuclear engineering and technology; nuclear techniques in agriculture; nuclear medicine; hydrology; and nuclear safety. The evaluation concluded that, overall, the Agency's technical co-operation activities have, in keeping with the national priorities concerning peaceful nuclear applications, contributed substantially to the establishment of Chile's nuclear scientific and technical infrastructure, and played a major role in Chile's efforts to introduce nuclear applications in a number of sectors of the economy, with many benefits for broader national development objectives. Another strength of the Agency's programme with Chile is the high level of commitment and dedication that was noted in the great majority of recipient institutions, and in particular at the Comision Chilena de Energia Nuclear, CChEN. Mention should also be made of the fact that bureaucracy appears to be less severe than in some other developing countries, and that constraints that frequently affect other countries, such as insufficient counterpart commitment and lack of continuity of

  15. A Preliminary Investigation of General and Technique-specific Assessments for the Evaluation of Laparoscopic Technical Skills.

    Science.gov (United States)

    Vergis, Ashley; Steigerwald, Sarah

    2017-10-07

    Background  Both general and technique-specific assessments of technical skill have been validated in surgical education. The purpose of this study was to assess the correlation between the objective structured assessment of technical skills (OSATS) and the global operative assessment of laparoscopic skills (GOALS) rating scales using a high-fidelity porcine laparoscopic cholecystectomy model. Methods Post-graduate year-one general surgery and urology residents (n=14) performed a live laparoscopic porcine cholecystectomy. Trained surgeons rated their performance using OSATS and GOALS assessment scales. Results Pearson's correlation coefficient between OSATS and GOALS was 0.96 for overall scores. It ranged from 0.78 - 0.89 for domains that overlapped between the two scales. Conclusion There is a very high correlation between OSATS and GOALS. This implies that they likely measure similar constructs and that either may be used for summative-type assessments of trainee skill. However, further investigation is needed to determine if technique-specific assessments may provide more useful feedback in formative evaluation.

  16. INDOT Technical Training Plan : [Technical Summary

    Science.gov (United States)

    2012-01-01

    A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

  17. Fiscal year 1998 Battelle performance evaluation agreement revision 1

    Energy Technology Data Exchange (ETDEWEB)

    DAVIS, T.L.

    1998-10-22

    Fiscal Year 1998 represents the second full year utilizing a results-oriented, performance-based contract. This document describes the critical outcomes, objectives, performance indicators, expected levels of performance, and the basis for the evaluation of the Contractors performance for the period October 1, 1997 through September 30, 1998, as required by Articles entitled Use of Objective Standards of Performance, Self Assessment and Performance Evaluation and Critical Outcomes Review of the Contract DE-AC08-76RLO1830. In partnership with the Contractor and other key customers, the Department of Energy (DOE) Richland Operations Office has defined six critical outcomes that same as the core for the Contractors performance evaluation. The Contractor also utilizes these outcomes as a basis for overall management of the Laboratory. As stated above six critical outcomes have been established for FY 1998. These outcomes are based on the following needs identified by DOE-HQ, RL and other customers of the Laboratory. Our Energy Research customer desires relevant, quality and cost effective science. Our Environmental Management customer wants technology developed, demonstrated, and deployed to solve environmental cleanup issues. To ensure the diversification and viability of the Laboratory as a National asset, RL and HQ alike want to increase the Science and Technical contributions of PNNL related to its core capabilities. RL wants improved leadership/management, cost-effective operations, and maintenance of a work environment, which fosters innovative thinking and high morale. RL and HQ alike desire compliance with environment, safety and health (ES and H) standards and disciplined conduct of operations for protection of the worker, environment, and the public, As with all of Hanford, DOE expects contribution of the Laboratory to the economic development of the Tri-Cities community, and the region, to build a new local economy that is less reliant on the Hanford mission

  18. Fiscal year 1998 Battelle performance evaluation agreement revision 1; TOPICAL

    International Nuclear Information System (INIS)

    DAVIS, T.L.

    1998-01-01

    Fiscal Year 1998 represents the second full year utilizing a results-oriented, performance-based contract. This document describes the critical outcomes, objectives, performance indicators, expected levels of performance, and the basis for the evaluation of the Contractors performance for the period October 1, 1997 through September 30, 1998, as required by Articles entitled Use of Objective Standards of Performance, Self Assessment and Performance Evaluation and Critical Outcomes Review of the Contract DE-AC08-76RLO1830. In partnership with the Contractor and other key customers, the Department of Energy (DOE) Richland Operations Office has defined six critical outcomes that same as the core for the Contractors performance evaluation. The Contractor also utilizes these outcomes as a basis for overall management of the Laboratory. As stated above six critical outcomes have been established for FY 1998. These outcomes are based on the following needs identified by DOE-HQ, RL and other customers of the Laboratory. Our Energy Research customer desires relevant, quality and cost effective science. Our Environmental Management customer wants technology developed, demonstrated, and deployed to solve environmental cleanup issues. To ensure the diversification and viability of the Laboratory as a National asset, RL and HQ alike want to increase the Science and Technical contributions of PNNL related to its core capabilities. RL wants improved leadership/management, cost-effective operations, and maintenance of a work environment, which fosters innovative thinking and high morale. RL and HQ alike desire compliance with environment, safety and health (ES and H) standards and disciplined conduct of operations for protection of the worker, environment, and the public, As with all of Hanford, DOE expects contribution of the Laboratory to the economic development of the Tri-Cities community, and the region, to build a new local economy that is less reliant on the Hanford mission

  19. The importance of probabilistic evaluations in connection with risk analyses according to technical safety laws

    International Nuclear Information System (INIS)

    Mathiak, E.

    1984-01-01

    The nuclear energy sector exemplifies the essential importance to be attached to the practical application of probabilistic evaluations (e.g. probabilistic reliability analyses) in connection with the legal risk assessment of technical systems and installations. The study is making use of a triad risk analysis and tries to reconcile the natural science and legal points of view. Without changing the definitions of 'risk' and 'hazard' in the legal sense of their meaning the publication discusses their reconcilation with the laws of natural science, their interpretation and application in view of the latter. (HSCH) [de

  20. Evaluation of Performance Indexes of Emergency Department

    Directory of Open Access Journals (Sweden)

    Alireza Baratloo

    2015-02-01

    Full Text Available Introduction: The importance of evaluating performance indicators in the emergency department, as one of the most important departments of hospital, is obvious to everyone. Therefore, in this study we aimed to appraise the five performance indicators, approved by the ministry of health, in Shohadaye Tajrish hospital, Tehran, Iran. Methods: In a descriptive cross-sectional study based on the profiles of all the patients admitted to the emergency department, performance indicators in the emergency department were evaluated. The study was divided into 2 parts about the establishment of emergency medicine system and training the medical staff: the first 6 months of 1392 and the second. Then these 2 periods were compared using Mann-Whitney U test while P< 0.05 was considered as the level of significance. Results: Of the studied indicators, mean triage time was 6.04 minutes in the first 6 months which was reduced to 1.5 minutes in the second 6 months (p=0.016. In addition, the percentage of patients who moved out of the department in 12 hours was lowered from 97.3% in the first period to 90.4% in the second (p=0.004. While, the percentage of patients who were decided upon in 6 hours (p=0.2, unsuccessful CPR percentage (p=0.34 and patients discharged against medical advice (p=0.42 showed no significant difference. Conclusion: The results of this study showed that the establishment of the emergency medicine system in the emergency department could lead to more efficient triage. Due to the differences made after their establishment including: different pattern of the patients admitted, increased stay of the patients in the department due to their need for prolonged intensive care, a raise in patient referral to the hospital by pre-hospital services and a higher percentage of occupied hospital beds, other indicators have not shown a significant improvement.

  1. CATTLE PRODUCTIVE PERFORMANCE EVALUATION CONFINED SUBMITTED IMMUNOCASTRATION

    Directory of Open Access Journals (Sweden)

    J. M. Maluf

    2016-09-01

    Full Text Available In order to evaluate the performance and carcass characteristics of cattle cross breeds ½ Aberdeen Angus x ½Nelore and Nelore confined submitted to immunocastration 218 male animals were used, feedlot, averaging 342 kg, divided into three experimental groups, T1: 117 steers ½ Angus x ½ Nelore no castrated (ANC, T2: 51 Nelore steers uncastrated (NNC and T3: 50 Nellore steers immunocastrated (NIC. The experiment lasted 144 days of confinement. The selection of animals for group formation was according to the individual weight, breed, sex condition and age. For immunocastration it wasused Bopriva® vaccine. The rating was finished according to the parameter used by the meatpacking industry ranging from 1 to 5. The experimental design was completely randomized in three groups. For the analyzes the variables studied statistics were submitted to analysis of variance (ANOVA and Tukey test both at the 5% level of significance. The results showed differences (p <0.01 at various features of productive performance and carcass between treatments. For slaughter weight, the ANC animals were higher (with 582.1 kg to Nelore, regardless of sexual condition, and the NNC were in turn heavier than the NIC, 527.4 and 503.7 respectively. Finally, it observed that the use of immunocastration in Nellore animals provided a decrease in productive performance of confined animals, but provided better finish carcass similar to crossbred (ANC.

  2. Technical Bulletin, Evaluation of Land Application Systems: Evaluation Checklist and Supporting Commentary.

    Science.gov (United States)

    Environmental Protection Agency, Washington, DC. Office of Water Programs.

    This document contains a checklist and background information for the evaluation for land application systems of wastewater. It is divided into three major sections dealing with facilities plans, design plans and specifications, and operation and maintenance manuals. The focus of section one is the thorough evaluation of alternatives and the…

  3. 48 CFR 1252.216-72 - Performance evaluation plan.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Performance evaluation....216-72 Performance evaluation plan. As prescribed in (TAR) 48 CFR 1216.406(b), insert the following clause: Performance Evaluation Plan (OCT 1994) (a) A Performance Evaluation Plan shall be unilaterally...

  4. Nuclear fuel performance evaluation. Final report

    International Nuclear Information System (INIS)

    Boerresen, S.; Pomeroy, D.L.; Rolstad, E.; Sauar, T.O.

    1977-06-01

    An evaluation has been made of the ability of Scandpower's empirical fuel performance model POSHO (''Power Shock'') to predict the probability of fuel pin failures resulting from pellet-clad interaction in commercial nuclear power plants. POSHO provides an analytical method to calculate the failure probabilities associated with power level maneuvers for different fuel assembly designs. Application of the method provides a basis for risk-benefit decisions concerning operational procedures, fuel designs and fuel management strategies. One boiling water reactor (BWR) and one pressurized water reactor (PWR) were selected for study to compare model predictions with actual failures, as determined from post irradiation examination of the fuel and activity release data. The fuel duty cycles were reconstructed from operating records and nodal power histories were created by using Scandpower's FMS computer programs. Nodal power histories, coupled with the relative pin power distribution in each node, were processed by the fuel failure prediction model, which tracks the interaction power level for each pin group in each node and calculates the power shocks and the probability for pellet-clad interaction cracks. The results of these calculations are processed statistically to give the expected number of cracks, the number of failed fuel pins in each assembly and the total number of failed assemblies in the core. Fuel performance in the BWR, Quad Cities Unit Two, was calculated by the model in approximate agreement with the observed performance. Fuel performance in the PWR, Maine Yankee, was calculated in approximate agreement for two of the three fuel designs. The high failure rate in the third design, Type B fuel, was not calculated by the POSHO pellet-clad interaction model

  5. Human System Simulation in Support of Human Performance Technical Basis at NPPs

    Energy Technology Data Exchange (ETDEWEB)

    David Gertman; Katya Le Blanc; alan mecham; william phoenix; Magdy Tawfik; Jeffrey Joe

    2010-06-01

    This paper focuses on strategies and progress toward establishing the Idaho National Laboratory’s (INL’s) Human Systems Simulator Laboratory at the Center for Advanced Energy Studies (CAES), a consortium of Idaho State Universities. The INL is one of the National Laboratories of the US Department of Energy. One of the first planned applications for the Human Systems Simulator Laboratory is implementation of a dynamic nuclear power plant simulation (NPP) where studies of operator workload, situation awareness, performance and preference will be carried out in simulated control rooms including nuclear power plant control rooms. Simulation offers a means by which to review operational concepts, improve design practices and provide a technical basis for licensing decisions. In preparation for the next generation power plant and current government and industry efforts in support of light water reactor sustainability, human operators will be attached to a suite of physiological measurement instruments and, in combination with traditional Human Factors Measurement techniques, carry out control room tasks in simulated advanced digital and hybrid analog/digital control rooms. The current focus of the Human Systems Simulator Laboratory is building core competence in quantitative and qualitative measurements of situation awareness and workload. Of particular interest is whether introduction of digital systems including automated procedures has the potential to reduce workload and enhance safety while improving situation awareness or whether workload is merely shifted and situation awareness is modified in yet to be determined ways. Data analysis is carried out by engineers and scientists and includes measures of the physical and neurological correlates of human performance. The current approach supports a user-centered design philosophy (see ISO 13407 “Human Centered Design Process for Interactive Systems, 1999) wherein the context for task performance along with the

  6. INDEPENDENT REVIEW OF THE X-701B GROUNDWATER REMEDY, PORTSMOUTH, OHIO: TECHNICAL EVALUATION AND RECOMMENDATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B.; Eddy-Dilek, C.; Costanza, J.; Rossabi, J.; Early, T.; Skubal, K.; Magnuson, C.

    2008-12-15

    The Department of Energy Portsmouth Paducah Project Office requested assistance from Department of Energy Office of Environmental Management (EM-22) to provide independent technical experts to evaluate past and ongoing remedial activities at the Portsmouth facility that were completed to address TCE contamination associated with the X-701B groundwater plume and to make recommendations for future efforts. The Independent Technical Review team was provided with a detailed and specific charter. The charter requested that the technical team first review the past and current activities completed for the X-701B groundwater remedy for trichloroethene (TCE) in accordance with a Decision Document that was issued by Ohio EPA on December 8, 2003 and a Work Plan that was approved by Ohio EPA on September 22, 2006. The remedy for X-701B divides the activities into four phases: Phase I - Initial Source Area Treatment, Phase II - Expanded Source Area Treatment, Phase III - Evaluation and Reporting, and Phase IV - Downgradient Remediation and Confirmation of Source Area Treatment. Phase I of the remedy was completed during FY2006, and DOE has now completed six oxidant injection events within Phase II. The Independent Technical Review team was asked to evaluate Phase II activities, including soil and groundwater results, and to determine whether or not the criteria that were defined in the Work Plan for the Phase II end point had been met. The following criteria are defined in the Work Plan as an acceptable Phase II end point: (1) Groundwater samples from the identified source area monitoring wells have concentrations below the Preliminary Remediation Goal (PRG) for TCE in groundwater, or (2) The remedy is no longer effective in removing TCE mass from the source area. In addition, the charter specifies that if the Review Team determines that the Phase II endpoint has not been reached, then the team should address the following issues: (1) If additional injection events are

  7. Assessing technical performance and determining the learning curve in cleft palate surgery using a high fidelity cleft palate simulator.

    Science.gov (United States)

    Podolsky, Dale J; Fisher, David M; Wong, Karen W; Szasz, Peter; Looi, Thomas; Drake, James M; Forrest, Christopher R

    2018-03-19

    Technical skills assessment can provide objective measures of surgical performance. This study assessed technical performance in cleft palate repair using a newly developed assessment tool and high fidelity cleft palate simulator through a longitudinal simulation training exercise. Three residents performed five and one resident performed nine consecutive endoscopically recorded cleft palate repairs using a cleft palate simulator. Two fellows in pediatric plastic surgery and two expert cleft surgeons also performed recorded simulated repairs. A cleft palate objective structured assessment of technical skill (CLOSATS) scoring scale and end-product score were developed to assess performance. Two blinded cleft surgeons assessed the recordings and the final repairs using the CLOSATS, end-product scores and a previously developed global rating scale. The average procedure specific (CLOSATS), global and end-product scores increased logarithmically after each successive simulation session for the residents. Reliability of the CLOSATS (average item ICC=0.85±0.093) and global ratings (average item ICC=0.91±0.02) amongst the raters was high. Reliability of the end-product assessments was lower (average item ICC=0.66±0.15). Standard setting linear regression using an overall cutoff score of 7 out of 10 corresponded to a pass score for the CLOSATS, and global rating score of 44 (maximum 60) and 23 (maximum 30) respectfully. Using logarithmic best fit curves, 6.3 simulation sessions are required to reach the minimum standard. A high fidelity cleft palate simulator has been developed that improves technical performance in cleft palate repair. The simulator and technical assessment scores can be used to determine performance before operating on patients.

  8. Performance evaluation of a computed radiography system

    Energy Technology Data Exchange (ETDEWEB)

    Roussilhe, J.; Fallet, E. [Carestream Health France, 71 - Chalon/Saone (France); Mango, St.A. [Carestream Health, Inc. Rochester, New York (United States)

    2007-07-01

    Computed radiography (CR) standards have been formalized and published in Europe and in the US. The CR system classification is defined in those standards by - minimum normalized signal-to-noise ratio (SNRN), and - maximum basic spatial resolution (SRb). Both the signal-to-noise ratio (SNR) and the contrast sensitivity of a CR system depend on the dose (exposure time and conditions) at the detector. Because of their wide dynamic range, the same storage phosphor imaging plate can qualify for all six CR system classes. The exposure characteristics from 30 to 450 kV, the contrast sensitivity, and the spatial resolution of the KODAK INDUSTREX CR Digital System have been thoroughly evaluated. This paper will present some of the factors that determine the system's spatial resolution performance. (authors)

  9. Evaluation model of commercial geological exploration and mining development project and analysis of some technical problems in commercial negotiation

    International Nuclear Information System (INIS)

    Yao Zhenkai

    2012-01-01

    A composite evaluation model of commercial geological exploration and mining development project was discussed, this new model consists of polity-economy-technique (PET) synthetic evaluation sub-model and geology-mining-metallurgy (GMM) technique evaluation sub-model. Besides, some key technical problems in commercial negotiation, such as information screening, quoted price and analysis of deadline, were briefly analyzed. (author)

  10. Simulating extracorporeal membrane oxygenation emergencies to improve human performance. Part II: assessment of technical and behavioral skills.

    Science.gov (United States)

    Anderson, JoDee M; Murphy, Allison A; Boyle, Kristine B; Yaeger, Kim A; Halamek, Louis P

    2006-01-01

    Healthcare professionals are expected to make rapid, correct decisions in critical situations despite what may be a lack of real practical experience in a particular crisis situation. Successful resolution of a medical crisis depends upon demonstration not only of appropriate technical skills but also of key behavioral skills (eg, leadership, communication, and teamwork). We have developed a hands-on, high fidelity, simulation-based training program (ECMO Sim) to provide healthcare professionals with the opportunity to learn and practice the technical and behavioral skills necessary to manage ECMO emergencies. Nine ECMO nurse specialists participated in two sequential randomly assigned simulated ECMO emergencies. The simulated emergencies were captured on videotape and reviewed with the subjects during facilitated debriefings that occurred immediately following each scenario. All videotapes were scored for key technical and behavioral skills by reviewers blinded to the sequence of the scenarios. The ratings of the subjects' technical and behavioral skills in each scenario were compared. Subjects performed key technical skills correctly more often in the second simulated ECMO emergency. In addition, their response times for three out of five specific technical tasks improved from the first to the second simulated emergency by an average of 27 seconds. Subjects' behavioral skills were rated more highly by masked reviewers in the second simulated ECMO emergency. The improvement in comprehensive behavioral scores from the first to the second scenario reached statistical significance in eight of nine subjects. After exposure to high-fidelity simulated ECMO emergencies, subjects demonstrated significant improvements in their technical and behavioral skills. ECMO Sim creates a learning environment that readily supports the acquisition of the technical and behavioral skills that are important in solving clinically significant, potentially life-threatening problems that can

  11. Technical and economical evaluation of water recycling in the carwash industry with membrane processes.

    Science.gov (United States)

    Boussu, K; Eelen, D; Vanassche, S; Vandecasteele, C; Van der Bruggen, B; Van Baelen, G; Colen, W; Vanassche, S

    2008-01-01

    In the carwash industry, water recycling is necessary to be in accordance with present and upcoming environmental laws. As this is not possible with traditional techniques, membrane processes (like ultrafiltration (UF) and nanofiltration (NF)) are technically and economically evaluated in this study. Concerning the technical part, there needs to be a compromise between a high permeate permeability on the one hand and a high permeate purity on the other hand. Depending on the use of the purified wastewater, ultrafiltration (to recycle wastewater in the main wash cycle) or nanofiltration (to recycle wastewater in the rinsing step) would be the optimal choice. Concerning the financial part, the implementation of membrane processes in the wastewater purification installation is economically feasible, especially when expensive tap water is used as pure water. These positive evaluations imply that membrane processes can be useful to recycle wastewater in the carwash industry, on condition that the right membrane type (with the least membrane fouling) and the right process format (e.g., hybrid process of UF and/or NF with a biological treatment) is selected. Copyright IWA Publishing 2008.

  12. Technical and economical evaluation of carbon dioxide capture and conversion to methanol process

    Science.gov (United States)

    Putra, Aditya Anugerah; Juwari, Handogo, Renanto

    2017-05-01

    Phenomenon of global warming, which is indicated by increasing of earth's surface temperature, is caused by high level of greenhouse gases level in the atmosphere. Carbon dioxide, which increases year by year because of high demand of energy, gives the largest contribution in greenhouse gases. One of the most applied solution to mitigate carbon dioxide level is post-combustion carbon capture technology. Although the technology can absorb up to 90% of carbon dioxide produced, some worries occur that captured carbon dioxide that is stored underground will be released over time. Utilizing captured carbon dioxide could be a promising solution. Captured carbon dioxide can be converted into more valuable material, such as methanol. This research will evaluate the conversion process of captured carbon dioxide to methanol, technically and economically. From the research, it is found that technically methanol can be made from captured carbon dioxide. Product gives 25.6905 kg/s flow with 99.69% purity of methanol. Economical evaluation of the whole conversion process shows that the process is economically feasible. The capture and conversion process needs 176,101,157.69 per year for total annual cost and can be overcome by revenue gained from methanol product sales.

  13. Performance evaluations of the ATST secondary mirror

    Science.gov (United States)

    Cho, Myung K.; DeVries, Joseph; Hansen, Eric

    2007-09-01

    The Advanced Technology Solar Telescope (ATST) has a 4.24m off-axis primary mirror designed to deliver diffraction-limited images of the sun. Its baseline secondary mirror (M2) design uses a 0.65m diameter Silicon Carbide mirror mounted kinematically by a bi-pod flexure mechanism at three equally spaced locations. Unlike other common telescopes, the ATST M2 is to be exposed to a significant solar heat loading. A thermal management system will be developed to accommodate the solar loading and minimize "mirror seeing effect" by controlling the temperature difference between the M2 optical surface and the ambient air at the site. Thermo-elastic analyses for steady state thermal behaviors of the ATST secondary mirror was performed using finite element analysis by I-DEAS TM and PCFRINGE TM for the optical analysis. We examined extensive heat transfer simulation cases and their results are discussed. The goal of this study is to evaluate the optical performances of M2 using thermal models and mechanical models. Thermal responses from the models enable us to manipulate time dependent thermal loadings to synthesize the operational environment for the design and development of TMS.

  14. Performance Evaluation of Frequent Subgraph Discovery Techniques

    Directory of Open Access Journals (Sweden)

    Saif Ur Rehman

    2014-01-01

    Full Text Available Due to rapid development of the Internet technology and new scientific advances, the number of applications that model the data as graphs increases, because graphs have highly expressive power to model a complicated structure. Graph mining is a well-explored area of research which is gaining popularity in the data mining community. A graph is a general model to represent data and has been used in many domains such as cheminformatics, web information management system, computer network, and bioinformatics, to name a few. In graph mining the frequent subgraph discovery is a challenging task. Frequent subgraph mining is concerned with discovery of those subgraphs from graph dataset which have frequent or multiple instances within the given graph dataset. In the literature a large number of frequent subgraph mining algorithms have been proposed; these included FSG, AGM, gSpan, CloseGraph, SPIN, Gaston, and Mofa. The objective of this research work is to perform quantitative comparison of the above listed techniques. The performances of these techniques have been evaluated through a number of experiments based on three different state-of-the-art graph datasets. This novel work will provide base for anyone who is working to design a new frequent subgraph discovery technique.

  15. Evaluating Performance: Strategic Alignment and Productivity

    OpenAIRE

    Armando Cuesta Santos

    2012-01-01

    Actually is reported as a world problem to enterprise label the rupture or inexistence of the connections between the strategy, human resource management and the organizational management indicators. In the Cuban enterprise practice this is manifest too. Surpass this rupture on the technical and organizer plan, is the principal objective of this research. In this paper is argument one methodological process that begins with the definition of labour competency to consider into post profiles, t...

  16. Performance Evaluation of an Experimental Turbojet Engine

    Science.gov (United States)

    Ekici, Selcuk; Sohret, Yasin; Coban, Kahraman; Altuntas, Onder; Karakoc, T. Hikmet

    2017-11-01

    An exergy analysis is presented including design parameters and performance assessment, by identifying the losses and efficiency of a gas turbine engine. The aim of this paper is to determine the performance of a small turbojet engine with an exergetic analysis based on test data. Experimental data from testing was collected at full-load of small turbojet engine. The turbojet engine exhaust data contains CO2, CO, CH4, H2, H2O, NO, NO2, N2 and O2 with a relative humidity of 35 % for the ambient air of the performed experiments. The evaluated main components of the turbojet engine are the air compressor, the combustion chamber and the gas turbine. As a result of the thermodynamic analysis, exergy efficiencies (based on product/fuel) of the air compressor, the combustion chamber and the gas turbine are 81.57 %, 50.13 % and 97.81 %, respectively. A major proportion of the total exergy destruction was found for the combustion chamber at 167.33 kW. The exergy destruction rates are 8.20 %, 90.70 % and 1.08 % in the compressor, the combustion chamber and the gas turbine, respectively. The rates of exergy destruction within the system components are compared on the basis of the exergy rate of the fuel provided to the engine. Eventually, the exergy rate of the fuel is calculated to be 4.50 % of unusable due to exergy destruction within the compressor, 49.76 % unusable due to exergy destruction within the combustion chamber and 0.59 % unusable due to exergy destruction within the gas turbine. It can be stated that approximately 55 % of the exergy rate of the fuel provided to the engine can not be used by the engine.

  17. Utility and performance relative to consumer product energy efficiency standards. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Coggins, J.L.

    1979-12-14

    An investigation of the relative utility and performance of nine major household consumer products covered by the Energy Policy and Conservation Act is summarized. The objective was to define the terms utility and performance, to recommend methods for quantifying these two concepts, and to recommend an approach for dealing with utility and performance issues in the energy efficiency standards program. The definitions developed are: performance of a consumer product is the objective measure of how well, with the expected level of consumer input (following the manufacturer's instructions for installation and operation), the product does its intended job; and utility of a consumer product is a subjective measure, based on the consumer's perception, of the capability of the product to satisfy human needs. Quantification is based on test procedures and consumer survey methods which are largely already in use by industry. Utility and performance issues are important in product classification for prescribing energy efficiency standards. The recommended approach to utility and performance issues and classification is: prior to setting standards, evaluate utility and performance issues in the most quantitative way allowed by resources and schedules in order to develop classification guidelines. This approach requires no changes in existing Department of Energy test procedures.

  18. INTEGRATED WATER TREATMENT SYSTEM PERFORMANCE EVALUATION

    International Nuclear Information System (INIS)

    Sexton, R.A.; Meeuwsen, W.E.

    2009-01-01

    This document describes the results of an evaluation of the current Integrated Water Treatment System (IWTS) operation against design performance and a determination of short term and long term actions recommended to sustain IWTS performance. The KW IWTS was designed to treat basin water and maintain basin clarity during fuel retrieval, washing, and packaging activities in the KW Basin. The original design was based on a mission that was limited to handling of KW Basin fuel. The use of the IWTS was extended by the decision to transfer KE fuel to KW to be cleaned and packaged using KW systems. The use was further extended for the packaging of two more Multi-Canister Overpacks (MCOs) containing legacy fuel and scrap. Planning is now in place to clean and package Knock Out Pot (KOP) Material in MCOs using these same systems. Some washing of KOP material in the Primary Cleaning Machine (PCM) is currently being done to remove material that is too small or too large to be included in the KOP Material stream. These plans will require that the IWTS remain operational through a campaign of as many as 30 additional MCOs, and has an estimated completion date in 2012. Recent operation of the IWTS during washing of canisters of KOP Material has been impacted by low pressure readings at the inlet of the P4 Booster Pump. The system provides a low pressure alarm at 10 psig, and low-low pressure interlock at 5 psig. The response to these low readings has been to lower total system flow to between 301 and 315 gpm. In addition, the IWTS operator has been required to operate the system in manual mode and make frequent adjustments to the P4 booster pump speed during PCM washes. The preferred mode of operation is to establish a setpoint of 317 gpm for the P4 pump speed and run IWTS in semi-automatic mode. Based on hydraulic modeling compared to field data presented in this report, the low P4 inlet pressure is attributed to restrictions in the 2-inch KOP inlet hose and in the KOP itself

  19. Office for Analysis and Evaluation of Operational Data 1996 annual report. Volume 10, Number 3: Technical training

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    This annual report of the US Nuclear Regulatory Commission`s Office for Analysis and Evaluation of Operational Data (AEOD) describes activities conducted during 1996. The report is published in three parts. NUREG-1272, Vol. 10, No. 1, covers power reactors and presents an overview of the operating experience of the nuclear power industry from the NRC perspective, including comments about trends of some key performance measures. The report also includes the principal findings and issues identified in AEOD studies over the past year and summarizes information from such sources as licensee event reports and reports to the NRC`s Operations Center. NUREG-1272, Vol. 10, No. 2, covers nuclear materials and presents a review of the events and concerns during 1996 associated with the use of licensed material in nonreactor applications, such as personnel overexposures and medical misadministrations. Both reports also contain a discussion of the Incident Investigation Team program and summarize both the Incident Investigation Team and Augmented Inspection Team reports. Each volume contains a list of the AEOD reports issued from CY 1980 through 1996. NUREG-1272, Vol. 10, No. 3, covers technical training and presents the activities of the Technical Training Center in support of the NRC`s mission in 1996.

  20. Development of evaluation and performance verification technology for radiotherapy radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. Y.; Jang, S. Y.; Kim, B. H. and others

    2005-02-15

    No matter how much the importance is emphasized, the exact assessment of the absorbed doses administered to the patients to treat the various diseases such as lately soaring malignant tumors with the radiotherapy practices is the most important factor. In reality, several over-exposed patients from the radiotherapy practice become very serious social issues. Especially, the development of a technology to exactly assess the high doses and high energies (In general, dose administered to the patients with the radiotherapy practices are very huge doses, and they are about three times higher than the lethal doses) generated by the radiation generators and irradiation equipment is a competing issue to be promptly conducted. Over fifty medical centers in Korea operate the radiation generators and irradiation equipment for the radiotherapy practices. However, neither the legal and regulatory systems to implement a quality assurance program are sufficiently stipulated nor qualified personnel who could run a program to maintain the quality assurance and control of those generators and equipment for the radiotherapy practices in the medical facilities are sufficiently employed. To overcome the above deficiencies, a quality assurance program such as those developed in the technically advanced countries should be developed to exactly assess the doses administered to patients with the radiotherapy practices and develop the necessary procedures to maintain the continuing performance of the machine or equipment for the radiotherapy. The QA program and procedures should induce the fluent calibration of the machine or equipment with quality, and definitely establish the safety of patients in the radiotherapy practices. In this study, a methodology for the verification and evaluation of the radiotherapy doses is developed, and several accurate measurements, evaluations of the doses delivered to patients and verification of the performance of the therapy machine and equipment are

  1. Evaluation of complications of root canal treatment performed by ...

    African Journals Online (AJOL)

    Mothanna K. AlRahabi

    2017-07-05

    Jul 5, 2017 ... This study evaluated the technical quality of root canal treatment (RCT) and detected iatrogenic errors in an undergraduate dental clinic at the College of Dentistry, Taibah. University, Saudi Arabia. Dental records of 280 patients who received RCT between 2013 and 2016 undertaken by dental students ...

  2. New Approaches for Navy Technical Training and Job Performance Aiding Using Expanded IETM Technology

    National Research Council Canada - National Science Library

    Jorgensen, Eric L; Fuller, Joseph J

    1996-01-01

    ...) began to develop better ways to present Technical Information (TI) to Navy Fleet users needed for purposes of operating, maintaining, training, and logistically supporting the Navy's inventory of weapon systems...

  3. Incremental Validity of New Computerized Aptitude Tests for Predicting Training Performance in Nine Navy Technical Schools

    National Research Council Canada - National Science Library

    Wolfe, John H; Larson, Gerald E; Alderton, David L

    2006-01-01

    During their second week of basic training, 4,989 Navy recruits assigned to one of nine technical training schools were administered a battery of six experimental computerized aptitude tests measuring four constructs...

  4. Fundamentals of neurosurgery: virtual reality tasks for training and evaluation of technical skills.

    Science.gov (United States)

    Choudhury, Nusrat; Gélinas-Phaneuf, Nicholas; Delorme, Sébastien; Del Maestro, Rolando

    2013-11-01

    Technical skills training in neurosurgery is mostly done in the operating room. New educational paradigms are encouraging the development of novel training methods for surgical skills. Simulation could answer some of these needs. This article presents the development of a conceptual training framework for use on a virtual reality neurosurgical simulator. Appropriate tasks were identified by reviewing neurosurgical oncology curricula requirements and performing cognitive task analyses of basic techniques and representative surgeries. The tasks were then elaborated into training modules by including learning objectives, instructions, levels of difficulty, and performance metrics. Surveys and interviews were iteratively conducted with subject matter experts to delimitate, review, discuss, and approve each of the development stages. Five tasks were selected as representative of basic and advanced neurosurgical skill. These tasks were: 1) ventriculostomy, 2) endoscopic nasal navigation, 3) tumor debulking, 4) hemostasis, and 5) microdissection. The complete training modules were structured into easy, intermediate, and advanced settings. Performance metrics were also integrated to provide feedback on outcome, efficiency, and errors. The subject matter experts deemed the proposed modules as pertinent and useful for neurosurgical skills training. The conceptual framework presented here, the Fundamentals of Neurosurgery, represents a first attempt to develop standardized training modules for technical skills acquisition in neurosurgical oncology. The National Research Council Canada is currently developing NeuroTouch, a virtual reality simulator for cranial microneurosurgery. The simulator presently includes the five Fundamentals of Neurosurgery modules at varying stages of completion. A first pilot study has shown that neurosurgical residents obtained higher performance scores on the simulator than medical students. Further work will validate its components and use in a

  5. 48 CFR 3052.216-72 - Performance evaluation plan.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Performance evaluation... CONTRACT CLAUSES Text of Provisions and Clauses 3052.216-72 Performance evaluation plan. As prescribed in... Evaluation Plan (DEC 2003) (a) A Performance Evaluation Plan shall be unilaterally established by the...

  6. Evaluation of Ultrafiltration Performance for Phospholipid Separation

    Science.gov (United States)

    Aryanti, N.; Wardhani, D. H.; Maulana, Z. S.; Roberto, D.

    2017-11-01

    Ultrafiltration membrane for degumming of crude palm oil has been applied as an alternative method since the membrane process required less procedure than the conventional degumming. This research focused on the examination of ultrafiltration performance for phospholipid separation from model crude palm oil degumming. Specifically, profile flux and rejection, as well as blocking mechanism, were investigated. Feed consisting of Refined Crude Palm Oil – Isopropanol – Lecithin mixtures were represented as crude palm oil degumming. Lecithin was denoted a phospholipid component, and the concentrations of lecithin in feed were varied to 0.1%, 0.2%, and 0.3%. The concentration of phospholipid was determined as phosphor content. At the concentration of lecithin in feed representing phospholipid concentration of 8,45 mg/kg, 8,45 mg/kg, 24,87 mg/kg and 57,58 mg/kg, respectively. Flux profiles confirmed that there was a flux decline during filtration. In addition, the lecithin concentrations do not significantly effect on further flux decline. Rejection characteristic and phospholipid concentration in the permeate showed that the phospholipid rejections by ultrafiltration were in the range of 23-79,5% representing permeate’s phospholipid concentration of 1,73 - 44,25 mg/kg. Evaluation of fouling mechanism by Hermia’s blocking model confirmed that the standard blocking is the dominant mechanism in the ultrafiltration of lecithin mixture.

  7. EVALUATING THE TECHNICAL EFFICIENCY OF SMALLHOLDER VEGETABLE FARMS IN DIVERSE AGROECOLOGICAL REGIONS OF NEPAL

    Directory of Open Access Journals (Sweden)

    Rudra Bahadur Shrestha

    2017-01-01

    Full Text Available Enhancing the efficiency of vegetable farms is crucial to increase the vegetable outputs for meeting the demand for growing population. This study evaluated the technical efficiency and explored factors determining the efficiencies of smallholder vegetable farms in diversified agro-ecological regions using Stochastic Frontier Analysis (SFA with cross-section data collected in 2013. The results revealed that average technical efficiency was found to be 0.77 and the variance parameters were highly significant indicating that the inefficiency existed in vegetable farms. The inefficiency gap could improve by operating the farms at the frontier level. The input variables consisting of land, labor, animal power, fertilizer, compost, pesticide, and capital were proved to be the important factors in determining the level of outputs. Meanwhile, the major sources of the inefficiencies identified were: age of farmer, training to the farmers, and infrastructure development. The efficiency in vegetable production can be improved by allocating input resources at the optimum levels, encouraging younger farmers in vegetable production, increasing training and extension activities, enhancing market access to the farmers, and developing infrastructures with regard to vegetable production.

  8. Evaluation of percutaneous radiologic placement of peritoneal dialysis catheters: technical aspects, results, and complications

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Hyun Pyo; Oh, Joo Hyeong; Yoon, Yub; Lee, Tae Won; Ihm, Chun Gyoo [Kyunghee University Hospital, seoul (Korea, Republic of)

    2001-01-01

    To evaluate the technical aspects, results and complications of the percutaneous radiologic placement of peritoneal dialysis catheters. Between December 1999 and April 2001, 26 peritoneal dialysis catheters were placed percutaneously in 26 consecutive patients by interventional radiologists. The patient group consisted of 16 men and ten women with a mean age of 55 (range, 30-77) years. The results and complications arising were reviewed, and the expected patency of the catheters was determined by means of Kaplan-Meier survival analysis. The technical success rate for catheter placement was 100% (26/26 patients). Severe local bleeding occurred in one patient due to by inferior epigastric artery puncture, and was treated by compression and electronic cautery. The duration of catheter implantation ranged from 1 to 510 days and the patency rate was 416{+-}45 days. Catheter malfunction occurred in four patients. In two, this was restored by manipulation in the intervention room, and in one, through the use of urokinase. In three patients, peritonitis occurred. Catheters were removed from four patients due to malfunction (n=2), peritonitis (n=1), and death (n=1). Percutaneous radiologic placement of a peritoneal dialysis catheter is a relatively simple procedure that reduces the complication rate and improves catheter patency.

  9. Technical considerations for evaluating substantially complete containment of high-level waste within the waste package

    International Nuclear Information System (INIS)

    Manaktala, H.K.; Interrante, C.G.

    1990-12-01

    This report deals with technical information that is considered essential for demonstrating the ability of the high-level radioactive waste package to provide ''substantially complete containment'' of its contents (vitrified waste form or spent light-water reactor fuel) for a period of 300 to 1000 years in a geological repository environment. The discussion is centered around technical considerations of the repository environment, materials and fabrication processes for the waste package components, various degradation modes of the materials of construction of the waste packages, and inspection and monitoring of the waste package during the preclosure and retrievability period, which could begin up to 50 years after initiation of waste emplacement. The emphasis in this report is on metallic materials. However, brief references have been made to other materials such as ceramics, graphite, bonded ceramic-metal systems, and other types of composites. The content of this report was presented to an external peer review panel of nine members at a workshop held at the Center for Nuclear Waste Regulatory Analyses (CNWRA), Southwest Research Institute, San Antonio, Texas, April 2--4, 1990. The recommendations of the peer review panel have been incorporated in this report. There are two companion reports; the second report in the series provides state-of-the-art techniques for uncertainty evaluations. 97 refs., 1 fig

  10. Advanced Flue Gas Desulfurization (AFGD) demonstration project: Volume 2, Project performance and economics. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-30

    The project objective is to demonstrate removal of 90--95% or more of the SO{sub 2} at approximately one-half the cost of conventional scrubbing technology; and to demonstrate significant reduction of space requirements. In this project, Pure Air has built a single SO{sub 2} absorber for a 528-MWe power plant. The absorber performs three functions in a single vessel: prequencher, absorber, and oxidation of sludge to gypsum. Additionally, the absorber is of a co- current design, in which the flue gas and scrubbing slurry move in the same direction and at a relatively high velocity compared to conventional scrubbers. These features all combine to yield a state- of-the-art SO{sub 2} absorber that is more compact and less expensive than conventional scrubbers. The project incorporated a number of technical features including the injection of pulverized limestone directly into the absorber, a device called an air rotary sparger located within the base of the absorber, and a novel wastewater evaporation system. The air rotary sparger combines the functions of agitation and air distribution into one piece of equipment to facilitate the oxidation of calcium sulfite to gypsum. Additionally, wastewater treatment is being demonstrated to minimize water disposal problems inherent in many high-chloride coals. Bituminous coals primarily from the Indiana, Illinois coal basin containing 2--4.5% sulfur were tested during the demonstration. The Advanced Flue Gas Desulfurization (AFGD) process has demonstrated removal of 95% or more of the SO{sub 2} while providing a commercial gypsum by-product in lieu of solid waste. A portion of the commercial gypsum is being agglomerated into a product known as PowerChip{reg_sign} gypsum which exhibits improved physical properties, easier flowability and more user friendly handling characteristics to enhance its transportation and marketability to gypsum end-users.

  11. Joint Polar Satellite System (JPSS) Common Ground System (CGS) Current Technical Performance Measures

    Science.gov (United States)

    Cochran, S.; Panas, M.; Jamilkowski, M. L.; Miller, S. W.

    2015-12-01

    ABSTRACT The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). The Joint Polar Satellite System will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The ground processing system for JPSS is known as the JPSS Common Ground System (JPSS CGS). Developed and maintained by Raytheon Intelligence, Information and Services (IIS), the CGS is a multi-mission enterprise system serving NOAA, NASA and their national and international partners. The CGS has demonstrated its scalability and flexibility to incorporate multiple missions efficiently and with minimal cost, schedule and risk, while strengthening global partnerships in weather and environmental monitoring. The CGS architecture is being upgraded to Block 2.0 in 2015 to "operationalize" S-NPP, leverage lessons learned to date in multi-mission support, take advantage of more reliable and efficient technologies, and satisfy new requirements and constraints in the continually evolving budgetary environment. To ensure the CGS meets these needs, we have developed 49 Technical Performance Measures (TPMs) across 10 categories, such as data latency, operational availability and scalability. This paper will provide an overview of the CGS Block 2.0 architecture, with particular focus on the 10 TPM categories listed above. We will provide updates on how we ensure the deployed architecture meets these TPMs to satisfy our multi-mission objectives with the deployment of Block 2.0.

  12. Effects of Plyometric and Sprint Training on Physical and Technical Skill Performance in Adolescent Soccer Players.

    Science.gov (United States)

    Sáez de Villarreal, Eduardo; Suarez-Arrones, Luis; Requena, Bernardo; Haff, Gregory G; Ferrete, Carlos

    2015-07-01

    To determine the influence of a short-term combined plyometric and sprint training (9 weeks) within regular soccer practice on explosive and technical actions of pubertal soccer players during the in-season. Twenty-six players were randomly assigned to 2 groups: control group (CG) (soccer training only) and combined group (CombG) (plyometric + acceleration + dribbling + shooting). All players trained soccer 4 times per week and the experimental groups supplemented the soccer training with a proposed plyometric-sprint training program for 40 minutes (2 days per weeks). Ten-meter sprint, 10-m agility with and without ball, CMJ and Abalakov vertical jump, ball-shooting speed, and Yo-Yo intermittent endurance test were measured before and after training. The experimental group followed a 9-week plyometric and sprint program (i.e., jumping, hurdling, bouncing, skipping, and footwork) implemented before the soccer training. Baseline-training results showed no significant differences between the groups in any of the variables tested. No improvement was found in the CG; however, meaningful improvement was found in all variables in the experimental group: CMJ (effect size [ES] = 0.9), Abalakov vertical jump (ES = 1.3), 10-m sprint (ES = 0.7-0.9), 10-m agility (ES = 0.8-1.2), and ball-shooting speed (ES = 0.7-0.8). A specific combined plyometric and sprint training within regular soccer practice improved explosive actions compared with conventional soccer training only. Therefore, the short-term combined program had a beneficial impact on explosive actions, such as sprinting, change of direction, jumping, and ball-shooting speed which are important determinants of match-winning actions in soccer performance. Therefore, we propose modifications to current training methodology for pubertal soccer players to include combined plyometric and speed training for athlete preparation in this sport.

  13. Analysis Influence of Managerial Competence, Technical Competence, and Strategic Competence on Firm Performance in Electrical Engineering Company in Bandung

    Science.gov (United States)

    Wijaya, E. R.; Irianto, D.

    2018-03-01

    The industry sectors that have an important role in the era of globalization is the electro engineering sector. The era of globalization led to intense competition. One of the negative effects of the intense competition is declining profits. Drop in profits caused many firms reduces their employees without seeking the root cause of declining profits in detail. Whereas, employee is the important resources to maintain competitive advantage. Competitive advantage can be measured by the performance of which is owned by the firm. The firm's performance can be formed of competencies that is unique, rare, irreplaceable, and difficult to imitate within the firm, one of them is the competence of the individual. According to a competency-based approach and the resource- based approach, individual competence that affect the performance of the firm is managerial competence, technical competence, and strategic competence. Questionnaire is built based on the dimensions of the firm's performance, managerial competence, technical competence, and strategic competence, are processed using partial least squares application. The results indicate that managerial competence negatively impact firm’s performance with weak ties. The technical competence and strategic competence positively affect firm’s performance with moderate ties.

  14. System of indicators for evaluation organizational and technical level of railway companies

    OpenAIRE

    Sinikova, E.

    2010-01-01

    The article reviewed existing methods of assessing the technical and organizational level of railway transport. Based on the identified advantages and disadvantages offered a more effective method of determining the organizational and technical level of railway ventures

  15. Evaluation of the technical feasibility of new conditioning matrices for long-lived radionuclides

    International Nuclear Information System (INIS)

    Deschanels, X.

    2004-01-01

    Several matrices have been selected for the conditioning of long-lived radioactive wastes: a compound made of a iodo-apatite core coated with a densified matrice of vanadium-phosphorus-lead apatite for iodine; the hollandite ceramic for cesium; the britholite, zirconolite, thorium phosphate diphosphate, and the monazite-brabantite solid solution for minor actinides; and a Nb-based metal alloy and phosphate or titanate-type ceramics for technetium. This report presents the results of the researches carried out between 2002-2004 during the technical feasibility step. The main points described are: - the behaviour of matrices under irradiation. These studies were performed thanks to an approach combining the characterization of natural analogues, the doping of matrices with short-lived radionuclides and the use of external irradiations; - the behaviour of these matrices with respect to water alteration; - the sensibility of these structures with respect to the incorporation of chemical impurities; - a package-process approach including the optimization of the process and preliminary studies about the package concept retained. These studies show that important work remains to be done to develop conditioning matrices suitable for iodine and technetium, while for cesium and minor actinides, the first steps of the technical feasibility are made. However, it remains impossible today to determine the structure having the best global behaviour. (J.S.)

  16. Evaluation of Energy Efficiency Performance of Heated Windows

    Science.gov (United States)

    Jammulamadaka, Hari Swarup

    The study about the evaluation of the performance of the heated windows was funded by the WVU Research Office as a technical assistance award at the 2014 TransTech Energy Business Development Conference to the Green Heated Glass company/project owned by Frank Dlubak. The award supports a WVU researcher to conduct a project important for commercialization. This project was awarded to the WVU Industrial Assessment Center in 2015. The current study attempted to evaluate the performance of the heated windows by developing an experimental setup to test the window at various temperatures by varying the current input to the window. The heated double pane window was installed in an insulated box. A temperature gradient was developed across the window by cooling one side of the window using gel based ice packs. The other face of the window was heated by passing current at different wattages through the window. The temperature of the inside and outside panes, current and voltage input, room and box temperature were recorded, and used to calculate the apparent R-value of the window when not being heated vs when being heated. It has been concluded from the study that the heated double pane window is more effective in reducing heat losses by as much as 50% than a non-heated double pane window, if the window temperature is maintained close to the room temperature. If the temperature of the window is much higher than the room temperature, the losses through the window appear to increase beyond that of a non-heated counterpart. The issues encountered during the current round of experiments are noted, and recommendations provided for future studies.

  17. Understanding artistic performance in its context: A case study of the practice of evaluation in a publicly funded opera company

    NARCIS (Netherlands)

    Chiaravalloti, F.

    2015-01-01

    This paper shows how the different groups of managers (administrative, artistic, and technical) of a publicly funded opera company evaluate the artistic performance of their organization. Performance information of varied nature is exchanged between the internal and external stakeholders of the

  18. Recycling of end-of-life reverse osmosis membranes by oxidative treatment: a technical evaluation.

    Science.gov (United States)

    Coutinho de Paula, Eduardo; Gomes, Júlia Célia Lima; Amaral, Míriam Cristina Santos

    2017-07-01

    The adverse impacts caused by the disposal of thousands of tonnes per annum of reverse osmosis (RO) membranes modules have grown dramatically around the world. The objective of this study was to evaluate the technical feasibility of recycling by chemical oxidation of end-of-life RO membranes for applications in other separation processes with specifications less rigorous. The recycling technique consisted in to cause a membrane exposition with oxidant solutions in order to remove its aromatic polyamide layer and subsequent conversion to a porous membrane. The recycling technique was evaluated by water permeability and salt rejection tests before and after the oxidative treatments. Initially, membranes' chemical cleaning and pretreatment procedures were assessed. Among factors evaluated, the oxidizing agent, its concentration and pH, associated with the oxidative treatment time, showed important influence on the oxidation of the membranes. Results showed that sodium hypochlorite and potassium permanganate are efficient agents for the membrane recycling. The great increased permeability and decreased salt rejection indicated changes on membranes' selective properties. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), and contact angle characterization techniques revealed marked changes on the main membranes' physical-chemical properties, such as morphology, roughness and hydrophobicity. Reuse of produced effluents and fouling tendency of recycled membranes were also evaluated.

  19. Final technical evaluation report for the proposed revised reclamation plan for the Atlas Corporation Moab Mill

    International Nuclear Information System (INIS)

    1997-03-01

    This final Technical Evaluation Report (TER) summarizes the US Nuclear Regulatory Commission staff's review of Atlas Corporation's proposed reclamation plan for its uranium mill tailings pile near Moab, Utah. The proposed reclamation would allow Atlas to (1) reclaim the tailings pile for permanent disposal and long-term custodial care by a government agency in its current location on the Moab site, (2) prepare the site for closure, and (3) relinquish responsibility of the site after having its NRC license terminated. The NRC staff concludes that, subject to license conditions identified in the TER, the proposed reclamation plan meets the requirements identified in NRC regulations, which appear primarily in 10 CFR Part 40. 112 refs., 6 figs., 16 tabs

  20. Technical determinants of tackle and ruck performance in International rugby union.

    Science.gov (United States)

    Hendricks, Sharief; van Niekerk, Tiffany; Sin, Drew Wade; Lambert, Mike; den Hollander, Steve; Brown, James; Maree, Willie; Treu, Paul; Till, Kevin; Jones, Ben

    2018-03-01

    The most frequently occurring contact events in rugby union are the tackle and ruck. The ability repeatedly to engage and win the tackle and ruck has been associated with team success. To win the tackle and ruck, players have to perform specific techniques. These techniques have not been studied at the highest level of rugby union. Therefore, the purpose of this study was to identify technical determinants of tackle and ruck performance at the highest level of rugby union. A total of 4479 tackle and 2914 ruck events were coded for the Six Nations and Championship competitions. Relative risk ratio (RR), the ratio of the probability of an outcome occurring when a characteristic was observed (versus the non-observed characteristic), was determined using multinomial logistic regression. Executing front-on tackles reduced the likelihood of offloads and tackle breaks in both competitions (Six Nations RR 3.0 Behind tackle, 95% confidence interval [95% CI]: 1.9-4.6, effect size [ES] = large, P < 0.001); Championship RR 2.9 Jersey tackle, 95% CI: 1.3-6.4, ES = moderate, P = 0.01). Fending during contact increased the chances of offloading and breaking the tackle in both competitions (Six Nations RR 4.5 Strong, 95% CI: 2.2-9.2, ES = large, P = P < 0.001; Championship RR 5.1 Moderate, 95% CI: 3.5-7.4, ES = large, P < 0.001). For the ruck, actively placing the ball increased the probability of maintaining possession (Six Nations RR 2.2, 95% CI: 1.1-4.3, ES = moderate, P = 0.03); Championship RR 4.0, 95% CI: 1.3-11.8, ES = large, P = 0.01). The techniques identified in this study should be incorporated and emphasised during training to prepare players for competition. Furthermore, these techniques need to be added to coaching manuals for the tackle and ruck.

  1. Serological examination of fattening pigs reveals associations between Ascaris suum, lung pathogens and technical performance parameters.

    Science.gov (United States)

    Vlaminck, Johnny; Düsseldorf, Simon; Heres, Lourens; Geldhof, Peter

    2015-06-15

    Diagnosing the presence of the highly prevalent and economically important pig parasite Ascaris suum on fattening farms has so far been challenging. Currently, only the number of livers affected at slaughter is routinely used to measure parasite exposure. However, recently, a new serological test was developed based on the detection of antibodies to the A. suum haemoglobin molecule. The test showed to be highly sensitive for the detection of exposure to A. suum in fattening pigs. In this study we first compared the performance of A. suum serology versus the percentage of affected livers at slaughter, subsequently we investigated potential associations between A. suum infection levels and exposure to important lung pathogens and finally we identified correlations between serological data and technical performance parameters (TPIs) from 20 Belgian and 20 German pig fattening farms. In both Belgian and German farms, a significant relationship was detected between elevated average Ascaris serology and percentages of affected livers (ρ=0.63 and ρ=0.75, respectively). On the Belgian farms, both Ascaris serology and the percentage of affected livers were negatively correlated with average daily gain (ADG) (ρ=-0.69 and ρ=-0.56, respectively). Using the German dataset, only a borderline negative association was detected between the percentage of affected livers and the ADG (ρ=-0.44, P=0.053). In contrast, only in the German farms, correlations between the percentage of affected lungs at slaughter and elevated presence of A. suum and several other airway pathogens were detected. To conclude, this study indicates that serological screening for A. suum on fattening farms is an attractive new diagnostic tool that can be used to indicate the presence of roundworm infection by measuring infection intensity. Furthermore the results of this study also add weight to the evidence that both roundworm infections as well as herd exposure to airway pathogens have a significant

  2. Technical evaluation of the fertilization of flue cured tobacco farming in Campoalegre and Garzon, Huila

    Directory of Open Access Journals (Sweden)

    Verónica Hoyos

    2014-04-01

    Full Text Available Agricultural production changes constantly and producers have to be able to use resources more efficiently to obtain a greater yield and improve quality at the lowest possible cost. Consequently, the objective of this paper was to carry out a technical evaluation of the fertilization programs for flue-cured tobacco farming in the municipalities of Campoalegre and Garzon, located in the department of Huila, Colombia. Seven treatments, corresponding to six fertilization alternatives (three dosages and two application sources and the conventional treatment carried out by producers (the control were evaluated. When the leaves reached ripeness for harvest, they were harvested, cured and later classified and weighed to measure the yield and the quality obtained from the treatments. For the technical and economic analysis, the yield, fertilization cost, net and gross income, and the purchase quality were taken into account. The municipality of Campoalegre showed a greater average yield (3,080 kg ha-1 over Garzon (2,640 kg ha-1. For both municipalities, the highest costs were experienced with the 150% fertilization treatment and the use of ammonium sulphate (AMS. For Campoalegre, the greatest yield was obtained without the use of ammonium sulphate at all three dosages. In Garzon, the greatest yield was obtained with the 100% dosage with or without the use of AMS and the conventional treatment carried out by the producers. The best cost-benefit ratio in Campoalegre was obtained with the 50% dosage of fertilization recommended without use of AMS and, in Garzon, it was obtained with the conventional treatment.

  3. TECHNICAL EVALUATION OF THE SAFE TRANSPORTATION OF WASTE CONTAINERS COATED WITH POLYUREA

    Energy Technology Data Exchange (ETDEWEB)

    VAIL, T.S.

    2007-03-30

    This technical report is to evaluate and establish that the transportation of waste containers (e.g. drums, wooden boxes, fiberglass-reinforced plywood (FRP) or metal boxes, tanks, casks, or other containers) that have an external application of polyurea coating between facilities on the Hanford Site can be achieved with a level of onsite safety equivalent to that achieved offsite. Utilizing the parameters, requirements, limitations, and controls described in the DOE/RL-2001-36, ''Hanford Sitewide Transportation Safety Document'' (TSD) and the Department of Energy Richland Operations (DOE-RL) approved package specific authorizations (e.g. Package Specific Safety Documents (PSSDs), One-Time Requests for Shipment (OTRSs), and Special Packaging Authorizations (SPAS)), this evaluation concludes that polyurea coatings on packages does not impose an undue hazard for normal and accident conditions. The transportation of all packages on the Hanford Site must comply with the transportation safety basis documents for that packaging system. Compliance with the requirements, limitations, or controls described in the safety basis for a package system will not be relaxed or modified because of the application of polyurea. The inspection criteria described in facility/projects procedures and work packages that ensure compliance with Container Management Programs and transportation safety basis documentation dictate the need to overpack a package without consideration for polyurea. This technical report reviews the transportation of waste packages coated with polyurea and does not credit the polyurea with enhancing the structural, thermal, containment, shielding, criticality, or gas generating posture of a package. Facilities/Projects Container Management Programs must determine if a container requires an overpack prior to the polyurea application recognizing that circumstances newly discovered surface contamination or loss of integrity may require a previously

  4. Evaluation of Long Leg Braces in Regard to Biomechanical, Clinival and Technical Orthopedic\\'s Fundamentals

    Directory of Open Access Journals (Sweden)

    Reza Vahhab-Kashani

    2006-01-01

    Full Text Available Objective: In some clients, for lower extremity, long leg brace, is prescribed. Then it will be fabricated bye orthotist and worn by patient. According to clinical principles, the brace should be as fit as possible with limb form. Also, an individual, walks and sits with his or her brace. Brace functions around joint motion axis. Quality and exact place of movement is define by biomechanical principles. Therefore, brace should be adapted with biochemical principles of the limb. Materials & Methods: A brace is made up several components which are assembled through acceptable technical orthopaedic methods and this procedure should be done without omission or neglect. If orthotist has enough scientific knowledge and observes all details, he or she will fabricate a perfect brace. We considered fabricated long leg brace according to this principle to meet study objectives while answering some question of study, we will disguss on the finding of our assessment. Also, we examine some possible deviations with accured by unsuitable fabrication, more over we suggest that some failur in designing procedure which leads to such deviation material and methods: In this descriptive analytic cross sectional study, long leg braces of 193 clients who were selected by random stratified sampling method, were evaluated by a previously designed questionare . Results: A. By assessment of 7 variables, it was revealed that 28.86% of manufactured braces, was not adapted with defined fundamentals, biomechanically. B. By evaluation of 9 variables, it was made known that 30 % of produced braces was not adapted with established fabricating fundamentals of lower limb braces clinically. C. By examination of 23 variables it was find out that 25.4% of fabricated braces, it was observed, which has some failures by attention to defined fabricating technical orthopaedic fundamentals. Conclusion: All the details, fabrication and design procedures should be carefully observed and

  5. TECHNICAL EVALUATION OF THE SAFE TRANSPORTATION OF WASTE CONTAINERS COATED WITH POLYUREA

    International Nuclear Information System (INIS)

    VAIL, T.S.

    2007-01-01

    This technical report is to evaluate and establish that the transportation of waste containers (e.g. drums, wooden boxes, fiberglass-reinforced plywood (FRP) or metal boxes, tanks, casks, or other containers) that have an external application of polyurea coating between facilities on the Hanford Site can be achieved with a level of onsite safety equivalent to that achieved offsite. Utilizing the parameters, requirements, limitations, and controls described in the DOE/RL-2001-36, ''Hanford Sitewide Transportation Safety Document'' (TSD) and the Department of Energy Richland Operations (DOE-RL) approved package specific authorizations (e.g. Package Specific Safety Documents (PSSDs), One-Time Requests for Shipment (OTRSs), and Special Packaging Authorizations (SPAS)), this evaluation concludes that polyurea coatings on packages does not impose an undue hazard for normal and accident conditions. The transportation of all packages on the Hanford Site must comply with the transportation safety basis documents for that packaging system. Compliance with the requirements, limitations, or controls described in the safety basis for a package system will not be relaxed or modified because of the application of polyurea. The inspection criteria described in facility/projects procedures and work packages that ensure compliance with Container Management Programs and transportation safety basis documentation dictate the need to overpack a package without consideration for polyurea. This technical report reviews the transportation of waste packages coated with polyurea and does not credit the polyurea with enhancing the structural, thermal, containment, shielding, criticality, or gas generating posture of a package. Facilities/Projects Container Management Programs must determine if a container requires an overpack prior to the polyurea application recognizing that circumstances newly discovered surface contamination or loss of integrity may require a previously un

  6. Performance analysis and technical assessment of coherent lidar systems for airborne wind shear detection

    Science.gov (United States)

    Huffaker, R. Milton; Targ, Russell

    1988-01-01

    Detailed computer simulations of the lidar wind-measuring process have been conducted to evaluate the use of pulsed coherent lidar for airborne windshear monitoring. NASA data fields for an actual microburst event were used in the simulation. Both CO2 and Ho:YAG laser lidar systems performed well in the microburst test case, and were able to measure wind shear in the severe weather of this wet microburst to ranges in excess of 1.4 km. The consequent warning time gained was about 15 sec.

  7. Performance Estimation of Organic Rankine Cycle by Using Soft Computing Technics

    Directory of Open Access Journals (Sweden)

    Tuğba Kovacı

    2017-10-01

    Full Text Available In this study, the thermal efficiency values of Organic Rankine cycle system were estimated depending on the condenser temperature and the evaporator temperatures values by adaptive network fuzzy interference system (ANFIS and artificial neural networks system (ANN. Organic Rankine cycle (ORC fluids of R365-mfc and SES32 were chosen to evaluate as the system fluid. The performance values of ANN and ANFIS models are compared with actual values. The R2 values are determined between 0.97 and 0.99 for SES36 and R365-mfc, and this is satisfactory. Although it was observed that both ANN and ANFIS models obtained a good statistical prediction performance through coefficient of determination variance, the accuracies of ANN predictions were usually imperceptible better than those of ANFIS predictions.

  8. Final Technical Report - Recovery Act: Organic Coatings as Encapsulants for Low Cost, High Performance PV Modules

    Energy Technology Data Exchange (ETDEWEB)

    Stuart Hellring; Jiping Shao; James Poole

    2011-12-05

    The objective of this project was to evaluate the feasibility of utilizing PPG's commercial organic coatings systems as efficient, modernized encapsulants for low cost, high performance, thin film photovoltaic modules. Our hypothesis was that the combination of an anticorrosive coating with a more traditional barrier topcoat would mitigate many electrochemical processes that are now responsible for the significant portion of photovoltaic (PV) failures, thereby nullifying the extremely high moisture barrier requirements of currently used encapsulation technology. Nine commercially available metal primer coatings and six commercially available top coatings were selected for screening. Twenty-one different primer/top coat combinations were evaluated. The primer coatings were shown to be the major contributor to corrosion inhibition, adhesion, and barrier properties. Two primer coatings and one top coating were downselected for testing on specially-fabricated test modules. The coated test modules passed initial current leakage and insulation testing. Damp Heat testing of control modules showed visible corrosion to the bus bar metal, whereas the coated modules showed none. One of the primer/top coat combinations retained solar power performance after Damp Heat testing despite showing some delamination at the EVA/solar cell interface. Thermal Cycling and Humidity Freeze testing resulted in only one test module retaining its power performance. Failure modes depended on the particular primer/top coating combination used. Overall, this study demonstrated that a relatively thin primer/top coating has the potential to replace the potting film and backsheet in crystalline silicon-based photovoltaic modules. Positive signals were received from commercially available coatings developed for applications having performance requirements different from those required for photovoltaic modules. It is likely that future work to redesign and customize these coatings would result in

  9. Evaluating Robot-Operator Job Performance

    National Research Council Canada - National Science Library

    Moses, Franklin L; Brooks, Peter S; Hofmann, M; Johnson, E; Laveson, J; Zaccaro, S

    2007-01-01

    .... This paper views the operator and robot as a team, outlines a schema for measuring robot-operator team performance, and presents an initial proof-of-principle test for quantitatively assessing that performance...

  10. Patterned Armor Performance Evaluation for Multiple Impacts

    National Research Council Canada - National Science Library

    De

    2003-01-01

    .... Performance characteristics of an ideal patterned armor with respect to multiple hits are discussed, and the types of single-shot ballistic data needed to quantify that performance are presented...

  11. Technical Letter Report: Evaluation and Analysis of a Few International Periodic Safety Review Summary Reports

    International Nuclear Information System (INIS)

    Chopra, Omesh K.; Diercks, Dwight R.; Ma, David Chia-Chiun; Garud, Yogendra S.

    2013-01-01

    1988. All of the reports reviewed were the regulator's assessment of the PSR findings rather than the original PSR report, and all but one were English translations from the original language. In these reviews, it was found that most of the countries base their regulatory guidance to some extent (and often to a large extent) on U.S. design codes and standards, NRC regulatory guidance, and U.S. industry guidance. In addition, many of the observed operational technical issues and OpE events reported for U.S. reactors are also cited in the PSR reports. The PSR reports also identified a number of potential technical material/component performance issues and OpE events that are not commonly reported for U.S. plants

  12. Technical Letter Report: Evaluation and Analysis of a Few International Periodic Safety Review Summary Reports

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, Omesh K. [Argonne National Lab., IL (United States). Environmental Science Division; Diercks, Dwight R. [Argonne National Lab., IL (United States). Nuclear Engineering Division; Ma, David Chia-Chiun [Argonne National Lab., IL (United States). Environmental Science Division; Garud, Yogendra S. [Argonne National Lab., IL (United States). Environmental Science Division

    2013-12-17

    and 1988. All of the reports reviewed were the regulator’s assessment of the PSR findings rather than the original PSR report, and all but one were English translations from the original language. In these reviews, it was found that most of the countries base their regulatory guidance to some extent (and often to a large extent) on U.S. design codes and standards, NRC regulatory guidance, and U.S. industry guidance. In addition, many of the observed operational technical issues and OpE events reported for U.S. reactors are also cited in the PSR reports. The PSR reports also identified a number of potential technical material/component performance issues and OpE events that are not commonly reported for U.S. plants.

  13. Development of a model performance-based sign sheeting specification based on the evaluation of nighttime traffic signs using legibility and eye-tracker data : data and analyses.

    Science.gov (United States)

    2010-09-01

    This report presents data and technical analyses for Texas Department of Transportation Project 0-5235. This : project focused on the evaluation of traffic sign sheeting performance in terms of meeting the nighttime : driver needs. The goal was to de...

  14. Technical Approach for Determining Key Parameters Needed for Modeling the Performance of Cast Stone for the Integrated Disposal Facility Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Yabusaki, Steven B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Serne, R. Jeffrey [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rockhold, Mark L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Guohui [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westsik, Joseph H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-03-30

    Washington River Protection Solutions (WRPS) and its contractors at Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) are conducting a development program to develop / refine the cementitious waste form for the wastes treated at the ETF and to provide the data needed to support the IDF PA. This technical approach document is intended to provide guidance to the cementitious waste form development program with respect to the waste form characterization and testing information needed to support the IDF PA. At the time of the preparation of this technical approach document, the IDF PA effort is just getting started and the approach to analyze the performance of the cementitious waste form has not been determined. Therefore, this document looks at a number of different approaches for evaluating the waste form performance and describes the testing needed to provide data for each approach. Though the approach addresses a cementitious secondary aqueous waste form, it is applicable to other waste forms such as Cast Stone for supplemental immobilization of Hanford LAW. The performance of Cast Stone as a physical and chemical barrier to the release of contaminants of concern (COCs) from solidification of Hanford liquid low activity waste (LAW) and secondary wastes processed through the Effluent Treatment Facility (ETF) is of critical importance to the Hanford Integrated Disposal Facility (IDF) total system performance assessment (TSPA). The effectiveness of cementitious waste forms as a barrier to COC release is expected to evolve with time. PA modeling must therefore anticipate and address processes, properties, and conditions that alter the physical and chemical controls on COC transport in the cementitious waste forms over time. Most organizations responsible for disposal facility operation and their regulators support an iterative hierarchical safety/performance assessment approach with a general philosophy that modeling provides

  15. 48 CFR 8.406-7 - Contractor Performance Evaluation.

    Science.gov (United States)

    2010-10-01

    ... Performance Evaluation. Ordering activities must prepare an evaluation of contractor performance for each... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Contractor Performance Evaluation. 8.406-7 Section 8.406-7 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION...

  16. 48 CFR 2452.216-73 - Performance evaluation plan.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Performance evaluation plan... 2452.216-73 Performance evaluation plan. As prescribed in 2416.406(e)(3), insert the following clause in all award fee contracts: Performance Evaluation Plan (AUG 1987) (a) The Government shall...

  17. 10 CFR 1045.9 - RD classification performance evaluation.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false RD classification performance evaluation. 1045.9 Section... classification performance evaluation. (a) Heads of agencies shall ensure that RD management officials and those... RD or FRD documents shall have their personnel performance evaluated with respect to classification...

  18. Technical-evaluation report on the proposed technical-specification changes for the inservice surveillance of safety-related hydraulic and mechanical snubbers at the Millstone Nuclear Power Station, Unit 2 (Docket No. 50-336)

    International Nuclear Information System (INIS)

    Selan, J.C.

    1983-01-01

    This report documents the technical evaluation of the proposed Technical Specification changes to Limiting Conditions for Operation, Surveillance Requirements and Bases for safety-related hydraulic and mechanical snubbers at the Millstone Nuclear Power Station, Unit 2. The evaluation is to determine whether the proposed Technical Specifications are in conformance with the model Standard Technical Specification set forth by the NRC. A check list, Appendix A of this report, compares the licensee's submittal with the NRC requirements and includes Proposed Resolution of the Deviations

  19. Technical-evaluation report on the proposed technical-specification changes for the inservice surveillance of safety-related hydraulic and mechanical snubbers at the James A. Fitzpatrick Nuclear Power Plant (Docket No. 50-333)

    International Nuclear Information System (INIS)

    Selan, J.C.

    1983-01-01

    This report documents the technical evaluation of the proposed Technical Specification changes to Limiting Conditions for Operation, Surveillance Requirements and Bases for safety-related hydraulic and mechanical snubbers at the James A. FitzPatrick Nuclear Power Plant. The evaluation is to determine whether the proposed Technical Specifications are in conformance with the model Standard Technical Specification set forth by the NRC. A check list, Appendix A of this report, compares the licensee's submittal with the NRC requirements and includes Proposed Resolution of the Deviations

  20. The Effects of Group Competition Upon Student Performance. Technical Report 68-7.

    Science.gov (United States)

    Kubala, Albert L.; Christensen, Harold E.

    High attrition in technical training courses in Army Service Schools was found to be a major problem during the years 1962 to 1965. Data obtained at the U.S. Army Air Defense School showed that students who volunteered specifically for their training had significantly lower attrition rates than students of comparable aptitude who were assigned to…

  1. Assessing the Effects of Organizational Culture, Rewards, and Individual Creativity on Technical Workgroup Performance

    Science.gov (United States)

    Navaresse, Daniel O.; Yauch, Charlene A.; Goff, Kathy; Fonseca, Daniel J.

    2014-01-01

    This study used an experimental approach to investigate the conditions under which creative outcomes should be expected from the interplay of individual creativity, the innovation orientation of the organizational culture, and the rewards distribution rules. The results of this study suggest that the individual creativity of technically educated…

  2. Technical solutions to improve performance of the recycled cement concrete aggregates for durable road pavements

    OpenAIRE

    MUSCALU, Marius; RADU, Andrei; LUNGU, Irina; TARANU, Nicolae; BUDESCU, Mihai; CAZACLIU, Bogdan

    2013-01-01

    This paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitable technologies for the construction of durable and environmental friendly rigid pavements by using recycled cement concrete, resulted from various demolition works. Various recycling principles and technologies, specific laboratory methods of improved technical solutions to enhance wear coefficients, density homogeneity, mixture contamination and water absorption ...

  3. Water-oil separation performance of technical textiles used for marine pollution disasters.

    Science.gov (United States)

    Seddighi, Mahdi; Hejazi, Sayyed Mahdi

    2015-07-15

    Oil is principally one of the most important energy sources in the world. However, as long as oil is explored and transported for being used, there will be the risk of the spillage into the marine environment. The use of technical textiles, i.e. fibrous beds, is a conventional separation technique for oil/water emulsion since it is efficient and easy to design. In this paper, the recovery of oil by technical textiles was mathematically modeled based on the structural parameters of textile and the capillary mechanism. Eleven types of commercial technical textiles with different properties were prepared for the experimental program. The experimental design included fiber type (polypropylene and polyester), fabric type (woven and/or nonwoven), fabric thickness and fabric areal density. Consequently, the absorption capacities of different technical textile samples were derived by the use of theoretical and experimental methods. The results show that there is a well fitness between theoretical outputs and experimental data. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Performance analysis of GYRO: a tool evaluation

    International Nuclear Information System (INIS)

    Worley, P; Candy, J; Carrington, L; Huck, K; Kaiser, T; Mahinthakumar, G; Malony, A; Moore, S; Reed, D; Roth, P; Shan, H; Shende, S; Snavely, A; Sreepathi, S; Wolf, F; Zhang, Y

    2005-01-01

    The performance of the Eulerian gyrokinetic-Maxwell solver code GYRO is analyzed on five high performance computing systems. First, a manual approach is taken, using custom scripts to analyze the output of embedded wallclock timers, floating point operation counts collected using hardware performance counters, and traces of user and communication events collected using the profiling interface to Message Passing Interface (MPI) libraries. Parts of the analysis are then repeated or extended using a number of sophisticated performance analysis tools: IPM, KOJAK, SvPablo, TAU, and the PMaC modeling tool suite. The paper briefly discusses what has been discovered via this manual analysis process, what performance analyses are inconvenient or infeasible to attempt manually, and to what extent the tools show promise in accelerating or significantly extending the manual performance analyses

  5. Staff Performance Evaluation in Public Organizations

    Directory of Open Access Journals (Sweden)

    Drumea C.

    2014-12-01

    Full Text Available In public Organizations staff performance is difficult to measure in absence of overall quantitative performance indicators. There are also the qualitative indicators that give an overview on staff’s motivation, strive, ability, commitment to values, teamwork. These aspects are even less easy to illustrate, in private and public sectors equally. In both cases, measuring staff performance at work, as well as its input on the global performance of the organization is a difficult task which has in practice different approaches. Subsequently, this paper is discussing the system indicators and performance triggers used in International Organizations UN affiliated, in order to adjust staff classification and benefits to their staff’s performance.

  6. Determination of dynamic performance of freight cars taking into account technical condition of side bearers

    Directory of Open Access Journals (Sweden)

    S.Myamlin

    2013-02-01

    Full Text Available Purpose. The railway transport plays an important role in social and economic life of the country and carries out the large containment of transportation activities. The transport industry should migrate towards innovation changes and increase its significance as an important transit subsystem on the way of renovation of both the infrastructure and the strategy of all transportation process components including the interaction with other transport modes. At present the life sets strategic challenges for the railway branch, and the basic goals among them are as follows: high-speed train traffic development, increase of the weight of freight trains, new rolling stock development etc. Due to the urgency of this subject, the researchers should cope with the task devoted to one of aspects of improving the freight transportation efficiency, namely to the study of effects of various factors and characteristics of technical conditions of the freight cars running gears (which are unavoidable to arise during operation on their basic dynamic indices. The deviations of technical conditions of running gears from the normal state of the wedge system of bogie swing suspension also play an important role among them. The purpose of the paper is to investigate the influence of different factors of the technical conditions of freight car running gears (size deviation in both the bearers and the wedge system during operation on their basic indices – coefficients of horizontal and vertical dynamics, vehicle body acceleration, frame strength, and derailment stability coefficient. Methodology. The study was conducted by numerical integration and mathematical modeling of the freight car dynamic loading using the software package “Dynamics of Rail Vehicles” (“DYNRAIL”. Findings. As a result of the research for freight car dynamic coefficients determination taking into account technical conditions of the side bearers, the dependencies of the basic freight cars

  7. Evaluating Robot-Operator Job Performance

    National Research Council Canada - National Science Library

    Moses, Franklin L; Brooks, Peter S; Hofmann, M; Johnson, E; Laveson, J; Zaccaro, S

    2007-01-01

    .... Tests that do include performance of the human operator often rely on qualitative observations -- observer judgments and interviews about workload, situation awareness, cognitive issues, and so on...

  8. Technical innovation and management

    International Nuclear Information System (INIS)

    Yoon, Yang Cheol

    1982-08-01

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  9. Evaluation of anterior chest wall implanted port: technical aspects, results, and complications

    International Nuclear Information System (INIS)

    Jeon, Young Hwan; Oh, Joo Hyeong; Yoon, Yup; Kim, Si Young

    2000-01-01

    To evaluate the technical aspects, results and complications of patients with implanted anterior chest wall port. Between April 1997 and June 1999, a total of 63 implanted ports were placed at the anterior chest wall of 63 consecutive patients by interventional radiologists. The indications were chemotherapy in 61 patients and total parenteral nutrition in two. The peripheral portion of the subclavian vein was punctured under fluoroscopic guidance via ipsilateral peripheral vein during venography. A central venous catheter was placed in the superior vena cava, and using the subcutaneous tunneling method, a connected infusion port was implanted at the anterior chest wall. Results and complications were reviewed, and by means of Kaplan-Meier survival analysis, the expected patency of the port was determined. The technical success rate for implanted port at the anterior chest wall was 100% (63/63 patients). In two patients, hematoma and oozing were treated by compression. The duration of port implantation ranged from 12 to 855 (mean, 187) days, and the port patency rate was 305.7±47.6 days. In seven patients (completed chemotherapy (n=3D3), central venous thrombosis (n=3D3) catheter-related infection (n=3D1)), the port was removed. Catheter obstruction occurred in two patients, and in one, the use of urokinase led to successful recanalization. Sixteen patients died of an underlying malignancy, but no catheter-related death was noted. Implantation of an anterior chest wall port is a safe and useful procedure, with long patency, for patients requiring chemotherapy and long-term venous access. (author)

  10. Performance Evaluation of Blind Tropospheric Delay correction ...

    African Journals Online (AJOL)

    This report represents an appraisal of the performance of the GPT2w and UNB3M models with accurate International GNSS Service (IGS)- tropospheric estimations for fifteen IGS stations over a period of 1 year on the Africa continent. Both models perform significantly better at low latitudes than higher latitudes. There was ...

  11. Technical evaluation of the susceptibility of safety-related systems to flooding caused by the failure of non-category I systems for Palisades nuclear power plant

    International Nuclear Information System (INIS)

    Collins, E.K.

    1979-10-01

    The technical evaluation is presented of Consumers Power Company's Palisades nuclear power plant to determine whether the failure of any non-Category I (seismic) equipment could result in a condition, such as flooding, that might potentially adversely affect the performance of safety-related equipment required for the safe shutdown of the facility or to mitigate the consequences of an accident. Criteria developed by the US Nuclear Regulatory Commission were used to evaluate the acceptability of the existing protection as well as measures taken by Consumers Power Company to minimize the danger of flooding and to protect safety-related equipment

  12. Incorporating a 360 Degree Evaluation Model IOT Transform the USMC Performance Evaluation System

    Science.gov (United States)

    2005-02-08

    Incorporating a 360 Evaluation Model IOT Transform the USMC Performance Evaluation System EWS 2005 Subject Area Manpower...Incorporating a 360 Evaluation Model IOT Transform the USMC Performance Evaluation System” Contemporary...COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Incorporating a 360 Evaluation Model IOT Transform the USMC Performance

  13. FLUORESCENT TRACER EVALUATION OF PROTECTIVE CLOTHING PERFORMANCE

    Science.gov (United States)

    Field studies evaluating chemical protective clothing (CPC), which is often employed as a primary control option to reduce occupational exposures during pesticide applications, are limited. This study, supported by the U.S. Environmental Protection Agency (EPA), was designed to...

  14. Integrated Evaluation Method-Based Technical and Economic Factors for International Oil Exploration Projects

    Directory of Open Access Journals (Sweden)

    Rui Guo

    2016-02-01

    Full Text Available Optimizing international oil exploration projects is one of the main challenges for oil companies in obtaining investment benefits. This paper establishes an integrated evaluation model to maximize investment benefits within the constraints of technical and economic factors, including geological factors, resource quality, geographic conditions, the investment environment, and oil contracts. The paper also proposes a dynamic calculation method of indicators’ weight associated with oil prices. The analysis describes the effects of contract terms and the investment environment on project value and quantifies the contractor income ratio for different types of contracts and the investment environment of the host country. Oil exploration projects in Africa are illustrated as examples in which the evaluation indicator Adjusted Concept Reserves (ACR is calculated for each project. The results show that remaining recoverable reserves and contract terms exert tremendous influences on ACR, and remaining recoverable reserves is the essential factor. Simultaneously, changes in oil prices lead to various rates of change in the contractor income ratio, which is determined by different fiscal terms. This study is important in helping oil companies optimize international oil projects and design reasonable investment strategies.

  15. Tunnelling in urban areas by EPB machines: technical evaluation of the system

    Directory of Open Access Journals (Sweden)

    Cardu Marilena

    2011-06-01

    Full Text Available The paper refers to the methods adopted for building a high-speed railway tunnel system between Bologna and Firenze (Italy, focusing attention on the Bologna node which represents the heart of the system, connecting the high speed network's main lines. The project includes 9 tunnels, accounting for 73 km of the 78 km route crossing below the Apennines. The paper pays attention to the main aspects to be taken into consideration for correctly choosing the tunnel boring machinery (TBM tobe used in urban areas. Thefundamental point in analysing technical aspects regarding an earth pressure balance (
    EPB machine concerned storing the main excavation parameter values; having collected and organised such data, statistical methods were used for processing it, the instantaneous velocities attained were empirically estimated and idle times were evaluated. The evaluation was made by calculating excavation specific energies (during different
    excavation phases to find a satisfactory correlation with the type of ground crossed. Interesting results have been found by comparison with other excavation parameters; in particular, a better understanding of an earth pressure balance shield's working phases has been reached thanks to an experimental study conducted during the construction of tunnels for a high-speed railway system in Italy. The paper contains details collected regarding the operation of two different EPB machines.

  16. Hospital evacuation; planning, assessment, performance and evaluation

    OpenAIRE

    Nero C Wabo; P Örtenwall; A Khorram-Manesh

    2012-01-01

    Objective: Malfunction in hospitals' complex internal systems, or extern threats, may result in a hospital evacuation. Factors contributing to such evacuation must be identified, analyzed and action plans should be prepared. Our aims in this study were 1) to evaluate the use of risk and vulnerability analysis as a basis for hospital evacuation plan, 2) to identify risks/hazards triggering an evacuation and evaluate the respond needed and 3) to propose a template with main key points for plann...

  17. The Evaluation of the Effectiveness of ESP Courses in Enhancing Technical Translation Proficiency: A Case Study of ESP Course for Mechanical Engineering Students

    Science.gov (United States)

    Hatam, Amir Hussein; Shafiei, Shilan

    2012-01-01

    The purpose of the present study was twofold. Firstly, it tried to investigate the relationship between the technical English proficiency of the students of Mechanical Engineering in the universities of Iran and their technical translation proficiency in translating technical texts of Mechanics. Secondly, it attempted to evaluate the effectiveness…

  18. A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

    Science.gov (United States)

    Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

    1982-01-01

    Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

  19. High Performance Flat Plate Solar Thermal Collector Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Rockenbaugh, Caleb [National Renewable Energy Lab. (NREL), Golden, CO (United States); Dean, Jesse [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lovullo, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lisell, Lars [National Renewable Energy Lab. (NREL), Golden, CO (United States); Barker, Greg [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hanckock, Ed [National Renewable Energy Lab. (NREL), Golden, CO (United States); Norton, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    This report was prepared for the General Services Administration by the National Renewable Energy Laboratory. The Honeycomb Solar Thermal Collector (HSTC) is a flat plate solar thermal collector that shows promising high efficiencies over a wide range of climate zones. The technical objectives of this study are to: 1) verify collector performance, 2) compare that performance to other market-available collectors, 3) verify overheat protection, and 4) analyze the economic performance of the HSTC both at the demonstration sites and across a matrix of climate zones and utility markets.

  20. Blurred digital mammography images: an analysis of technical recall and observer detection performance.

    Science.gov (United States)

    Ma, Wang Kei; Borgen, Rita; Kelly, Judith; Millington, Sara; Hilton, Beverley; Aspin, Rob; Lança, Carla; Hogg, Peter

    2017-03-01

    Blurred images in full-field digital mammography are a problem in the UK Breast Screening Programme. Technical recalls may be due to blurring not being seen on lower resolution monitors used for review. This study assesses the visual detection of blurring on a 2.3-MP monitor and a 5-MP report grade monitor and proposes an observer standard for the visual detection of blurring on a 5-MP reporting grade monitor. 28 observers assessed 120 images for blurring; 20 images had no blurring present, whereas 100 images had blurring imposed through mathematical simulation at 0.2, 0.4, 0.6, 0.8 and 1.0 mm levels of motion. Technical recall rate for both monitors and angular size at each level of motion were calculated. χ 2 tests were used to test whether significant differences in blurring detection existed between 2.3- and 5-MP monitors. The technical recall rate for 2.3- and 5-MP monitors are 20.3% and 9.1%, respectively. The angular size for 0.2- to 1-mm motion varied from 55 to 275 arc s. The minimum amount of motion for visual detection of blurring in this study is 0.4 mm. For 0.2-mm simulated motion, there was no significant difference [χ 2 (1, N = 1095) = 1.61, p = 0.20] in blurring detection between the 2.3- and 5-MP monitors. According to this study, monitors ≤2.3 MP are not suitable for technical review of full-field digital mammography images for the detection of blur. Advances in knowledge: This research proposes the first observer standard for the visual detection of blurring.

  1. Methodology for evaluation of diagnostic performance

    International Nuclear Information System (INIS)

    Metz, C.E.

    1992-01-01

    Effort in this project during the past year has focused on the development, refinement, and distribution of computer software that will allow current Receiver Operating Characteristic (ROC) methodology to be used conveniently and reliably by investigators in a variety of evaluation tasks in diagnostic medicine; and on the development of new ROC methodology that will broaden the spectrum of evaluation tasks and/or experimental settings to which the fundamental approach can be applied. Progress has been limited by the amount of financial support made available to the project

  2. Final Technical Report, Oct 2004 - Nov. 2006, High Performance Flexible Reversible Solid Oxide Fuel Cell

    Energy Technology Data Exchange (ETDEWEB)

    Guan, Jie; Minh, Nguyen

    2007-02-21

    This report summarizes the work performed for the program entitled “High Performance Flexible Reversible Solid Oxide Fuel Cell” under Cooperative Agreement DE-FC36-04GO14351 for the U. S. Department of Energy. The overall objective of this project is to demonstrate a single modular stack that generates electricity from a variety of fuels (hydrogen and other fuels such as biomass, distributed natural gas, etc.) and when operated in the reverse mode, produces hydrogen from steam. This project has evaluated and selected baseline cell materials, developed a set of materials for oxygen and hydrogen electrodes, and optimized electrode microstructures for reversible solid oxide fuel cells (RSOFCs); and demonstrated the feasibility and operation of a RSOFC multi-cell stack. A 10-cell reversible SOFC stack was operated over 1000 hours alternating between fuel cell (with hydrogen and methane as fuel) and steam electrolysis modes. The stack ran very successfully with high power density of 480 mW/cm2 at 0.7V and 80% fuel utilization in fuel cell mode and >6 SLPM hydrogen production in steam electrolysis mode using about 1.1 kW electrical power. The hydrogen generation is equivalent to a specific capability of 2.59 Nm3/m2 with electrical energy demand of 3 kWh/Nm3. The performance stability in electrolysis mode was improved vastly during the program with a degradation rate reduction from 8000 to 200 mohm-cm2/1000 hrs. This was accomplished by increasing the activity and improving microstructure of the oxygen electrode. Both cost estimate and technology assessment were conducted. Besides the flexibility running under both fuel cell mode and electrolysis mode, the reversible SOFC system has the potentials for low cost and high efficient hydrogen production through steam electrolysis. The cost for hydrogen production at large scale was estimated at ~$2.7/kg H2, comparing favorably with other electrolysis techology.

  3. Comparative analysis of concentrating solar power and photovoltaic technologies: Technical and environmental evaluations

    International Nuclear Information System (INIS)

    Desideri, U.; Zepparelli, F.; Morettini, V.; Garroni, E.

    2013-01-01

    Highlights: ► Life cycle was assessed for both concentrated solar power and photovoltaic systems. ► The PV plant has a higher environmental impact than the CSP plant. ► The Global Warming Potential is lower for the CSP than for the PV plant. ► The energy payback time is lower for the CSP than for the PV plant. -- Abstract: Solar energy is an important alternative energy source to fossil fuels and theoretically the most available energy source on the earth. Solar energy can be converted into electric energy by using two different processes: by means of thermodynamic cycles and the photovoltaic conversion. Solar thermal technologies, sometimes called thermodynamic solar technologies, operating at medium (about 500 °C) and high temperatures (about 1000 °C), have recently attracted a renewed interest and have become one of the most promising alternatives in the field of solar energy utilization. Photovoltaic conversion is very interesting, although still quite expensive, because of the absence of moving components and the reduced operating and management costs. The main objectives of the present work are: •to carry out comparative technical evaluations on the amount of electricity produced by two hypothetical plants, located on the same site, for which a preliminary design was made: a solar thermal power plant with parabolic trough collectors and a photovoltaic plant with a single-axis tracking system; •to carry out a comparative analysis of the environmental impact derived from the processes of electricity generation during the whole life cycle of the two hypothetical power plants. First a technical comparison between the two plants was made assuming that they have the same nominal electric power and then the same total covered surface. The methodology chosen to evaluate the environmental impact associated with the power plants is the Life Cycle Assessment (LCA). It allows to analyze all the phases of the life cycle of the plants, from the extraction of

  4. Scientific Applications Performance Evaluation on Burst Buffer

    KAUST Repository

    Markomanolis, George S.

    2017-10-19

    Parallel I/O is an integral component of modern high performance computing, especially in storing and processing very large datasets, such as the case of seismic imaging, CFD, combustion and weather modeling. The storage hierarchy includes nowadays additional layers, the latest being the usage of SSD-based storage as a Burst Buffer for I/O acceleration. We present an in-depth analysis on how to use Burst Buffer for specific cases and how the internal MPI I/O aggregators operate according to the options that the user provides during his job submission. We analyze the performance of a range of I/O intensive scientific applications, at various scales on a large installation of Lustre parallel file system compared to an SSD-based Burst Buffer. Our results show a performance improvement over Lustre when using Burst Buffer. Moreover, we show results from a data hierarchy library which indicate that the standard I/O approaches are not enough to get the expected performance from this technology. The performance gain on the total execution time of the studied applications is between 1.16 and 3 times compared to Lustre. One of the test cases achieved an impressive I/O throughput of 900 GB/s on Burst Buffer.

  5. A New Strategy to Evaluate Technical Efficiency in Hospitals Using Homogeneous Groups of Casemix : How to Evaluate When There is Not DRGs?

    Science.gov (United States)

    Villalobos-Cid, Manuel; Chacón, Max; Zitko, Pedro; Instroza-Ponta, Mario

    2016-04-01

    The public health system has restricted economic resources. Because of that, it is necessary to know how the resources are being used and if they are properly distributed. Several works have applied classical approaches based in Data Envelopment Analysis (DEA) and Stochastic Frontier Analysis (SFA) for this purpose. However, if we have hospitals with different casemix, this is not the best approach. In order to avoid biases in the comparisons, other works have recommended the use of hospital production data corrected by the weights from Diagnosis Related Groups (DRGs), to adjust the casemix of hospitals. However, not all countries have this tool fully implemented, which limits the efficiency evaluation. This paper proposes a new approach for evaluating the efficiency of hospitals. It uses a graph-based clustering algorithm to find groups of hospitals that have similar production profiles. Then, DEA is used to evaluate the technical efficiency of each group. The proposed approach is tested using the production data from 2014 of 193 Chilean public hospitals. The results allowed to identify different performance profiles of each group, that differs from other studies that employs data from partially implemented DRGs. Our results are able to deliver a better description of the resource management of the different groups of hospitals. We have created a website with the results ( bioinformatic.diinf.usach.cl/publichealth ). Data can be requested to the authors.

  6. Comparative Performance Evaluation of the Agricultural ...

    African Journals Online (AJOL)

    USER

    Key words: Evaluation of Extension programmes, Agricultural Development. Programmes, Extension Service Delivery. Introduction. The most fundamental challenge facing the world today and Nigeria as a country, is food insecurity. It is against this backdrop that the current drive of. Nigeria's agricultural policy has been ...

  7. Frequency Domain Evaluation of Helmet Padding Performance

    Science.gov (United States)

    2014-01-24

    F717 [8] have been used to evaluate helmets including motorcycle, football, and hockey helmets to ensure a basic level of protection. These standards... Physically , this means that the smaller the magnitude of fω, the less coupled the response at the surface of the head is to the force being applied

  8. Comparative evaluation of growth performance, carcass ...

    African Journals Online (AJOL)

    This experiment was conducted at the poultry unit of the Teaching and Research farm, Michael Okpara University of Agriculture, Umudike to evaluate growth traits, ... Each strain was allotted into five replicates of 9 birds per replicate in a Completely Randomized Design (CRD) Data were collected at both the starter phase ...

  9. Evaluation of the diagnostic performance and operational ...

    African Journals Online (AJOL)

    The objectives of the study were (i) to assess the sensitivity and specificity of four on site rapid tests in comparison with Treponema pallidum haemagglutination assay (TPHA) as a gold standard and (ii) to evaluate the operational characteristics of those tests among health workers in a maternity unit. Methods: Four rapid ...

  10. Standards for University Libraries: Evaluation of Performance.

    Science.gov (United States)

    College and Research Libraries News, 1989

    1989-01-01

    Presents the revised "Standards for University Libraries" approved by the Association of College and Research Libraries Board. Areas covered in the standards include a basic statement of purpose, underlying assumptions, goal development, measuring achievement and forming a statement of expectations, and evaluative criteria. Resource…

  11. Evaluating Performances of Traffic Noise Models | Oyedepo ...

    African Journals Online (AJOL)

    Traffic noise in decibel dB(A) were measured at six locations using 407780A Integrating Sound Level Meter, while spot speed and traffic volume were collected with cine-camera. The predicted sound exposure level (SEL) was evaluated using Burgess, British and FWHA model. The average noise level obtained are 77.64 ...

  12. Evaluation of the diagnostic performance and operational ...

    African Journals Online (AJOL)

    those tests among health workers in a maternity unit. Methods: Four rapid syphilis tests commercially available in Burkina Faso were evaluated using archived serum samples and. Treponema pallidum hemagglutination assay (TPHA) as the gold standard. Blood samples were collected between Novem- ber 2011 and June ...

  13. The evaluation of myomectomies performed during cesarean ...

    African Journals Online (AJOL)

    Background: We evaluated the data of patients who had applied myomectomy during cesarean section operation in our clinic between April, 2008 and December, 2010. Objective: In this period, 3689 cesarean sections were done in our clinic, we analyzed their data retrospectively and determined 27 myomectomy cases ...

  14. Performance Evaluation of Expert Team Members

    Science.gov (United States)

    2007-06-18

    perspectives on organ donation: The reason for the shortage. Colloquium presented at the Department of Nursing and Midwifery , University of Stirling...Pingenot, J. D. F. (in press). Quantitative method of medication system interface evaluation. Computers, Informatics, Nursing . Pingenot, A. M

  15. Performance Evaluation of Balanced Pension Plans

    NARCIS (Netherlands)

    L. Andreu (Laura); L.A.P. Swinkels (Laurens)

    2009-01-01

    textabstractThis paper examines the ability of balanced pension plan managers to successfully time the equity and bond market and select the appropriate assets within these markets. In order to evaluate both market timing abilities in these balanced pension plans, we extend the traditional equity

  16. Technical Validation of ARTSENS–An Image Free Device for Evaluation of Vascular Stiffness

    Science.gov (United States)

    Radhakrishnan, Ravikumar; Kusmakar, Shitanshu; Thrivikraman, Arya Sree; Sivaprakasam, Mohanasankar

    2015-01-01

    Vascular stiffness is an indicator of cardiovascular health, with carotid artery stiffness having established correlation to coronary heart disease and utility in cardiovascular diagnosis and screening. State of art equipment for stiffness evaluation are expensive, require expertise to operate and not amenable for field deployment. In this context, we developed ARTerial Stiffness Evaluation for Noninvasive Screening (ARTSENS), a device for image free, noninvasive, automated evaluation of vascular stiffness amenable for field use. ARTSENS has a frugal hardware design, utilizing a single ultrasound transducer to interrogate the carotid artery, integrated with robust algorithms that extract arterial dimensions and compute clinically accepted measures of arterial stiffness. The ability of ARTSENS to measure vascular stiffness in vivo was validated by performing measurements on 125 subjects. The accuracy of results was verified with the state-of-the-art ultrasound imaging-based echo-tracking system. The relation between arterial stiffness measurements performed in sitting posture for ARTSENS measurement and sitting/supine postures for imaging system was also investigated to examine feasibility of performing ARTSENS measurements in the sitting posture for field deployment. This paper verified the feasibility of the novel ARTSENS device in performing accurate in vivo measurements of arterial stiffness. As a portable device that performs automated measurement of carotid artery stiffness with minimal operator input, ARTSENS has strong potential for use in large-scale screening. PMID:27170892

  17. Performance evaluation of 1 kw PEFC

    Energy Technology Data Exchange (ETDEWEB)

    Komaki, Hideaki [Ishikawajima-Harima Heavy Industries Co., Ltd. Tokyo (Japan); Tsuchiyama, Syozo [Shipbuilding Research Association, Minato-ky, Tokyo (Japan)

    1996-12-31

    This report covers part of a joint study on a PEFC propulsion system for surface ships, summarized in a presentation to this Seminar, entitled {open_quote}Study on a PEFC Propulsion System for Surface Ships{close_quotes}, and which envisages application to a 1,500 DWT cargo vessel. The aspect treated here concerns the effects brought on PEFC operating performance by conditions particular to shipboard operation. The performance characteristics were examined through tests performed on a 1 kw stack and on a single cell (Manufactured by Fuji Electric Co., Ltd.). The tests covered the items (1) to (4) cited in the headings of the sections that follow. Specifications of the stack and single cell are as given.

  18. Performance Evaluation of Coded Meshed Networks

    DEFF Research Database (Denmark)

    Krigslund, Jeppe; Hansen, Jonas; Pedersen, Morten Videbæk

    2013-01-01

    of the former to enhance the gains of the latter. We first motivate our work through measurements in WiFi mesh networks. Later, we compare state-of-the-art approaches, e.g., COPE, RLNC, to CORE. Our measurements show the higher reliability and throughput of CORE over other schemes, especially, for asymmetric......We characterize the performance of intra- and inter-session network coding (NC) in wireless networks using real-life implementations. We compare this performance to a recently developed hybrid approach, called CORE, which combines intra- and inter-session NC exploiting the code structure...

  19. Performance Evaluation of Wave Energy Converters

    DEFF Research Database (Denmark)

    Pecher, Arthur

    . Guidelines for the development of wave energy converters recommend the use of different prototypes, having different sizes, which have to perform tank tests or sea trials. This implicates the need of different testing environment, which shifts from being controllable to uncontrollable with the development...... stages, and results thereby in a need for specific test objectives and procedures for each development stage. This PhD thesis has looked into the different development stages and more specifically in the performance assessment of wave energy converters based on tank testing and sea trials. The objective...

  20. Performance Evaluation of Wave Energy Converters

    DEFF Research Database (Denmark)

    Pecher, Arthur

    . Guidelines for the development of wave energy converters recommend the use of different prototypes, having different sizes, which have to perform tank tests or sea trials. Thisimplicates the need of different testing environment, which shifts from being controllable to uncontrollable with the development...... stages, and results thereby in a need for specific testobjectives and procedures for each development stage. This PhD thesis has looked into the different development stages and more specifically in the performance assessment of wave energy converters based on tank testing and sea trials. The objective...

  1. Evaluating performances of vacuum dedicated blackbodies

    Science.gov (United States)

    Barrat, Catherine; Leboucher, Vincent

    2014-10-01

    Vacuum blackbodies have to combine performance of traditional infrared reference sources with specific features in order to operate in vacuum chamber. As their usual applications are calibration and tests of IR sensors to be loaded on satellites, earth or space radiation simulation and test of IR sensors for scientific applications, their usual features are emission over an ultra extended temperature range, knowledge of the radiated temperature with a high accuracy, extremely high uniformity of the emissive surface and extremely high emissivity. HGH developed tools to demonstrate such performances since they surpass the accuracy of usual tools.

  2. Design, Construction and Performance Evaluation of Multiple ...

    African Journals Online (AJOL)

    The complex casting machine has been designed to perform the following techniques: gravity casting, stir casting, squeeze casting, vacuum casting, compocasting and thixoforming. All these casting techniques have been integrated into this complex casting machine as different units which work with the help of automation.

  3. PERFORMANCE EVALUATION OF SOME LOCALLY FABRICATED ...

    African Journals Online (AJOL)

    In this study, four solid fuel household cook-stoves in Mubi, Adamawa state were tested for performance using the water Boiling Test (WBT) protocol. Results from the study showed that metal charcoal stove had the highest efficiency of 20.02%, followed by clay charcoal stove with 17.06%, then Metal shield stove with ...

  4. Performance evaluation of prototype mechanical cassava harvester ...

    African Journals Online (AJOL)

    Large-scale cassava harvesting, especially during the dry season, is a major constraint to its industrial demand and commercial production. Manual harvesting is slow and ... Results from field trials showed prototype harvesters weighing 268 – 310 kg can achieve optimum performance on ridged landforms. When harvested ...

  5. Performance evaluation of chip seals in Idaho.

    Science.gov (United States)

    2010-08-01

    The intent of this research project is to identify a wide variety of parameters that influence the performance of pavements treated via chip seals within the State of Idaho. Chip sealing is currently one of the most popular methods of maintenance for...

  6. Performance Evaluation of Hyper Threading Technology ...

    African Journals Online (AJOL)

    Results using four full-scale, productionquality scientific applications from computational fluid dynamics indicate that HT generally improves processor resource utilization efficiency, but does not necessarily translate into overall application performance gain. Key words: Hyper-Threading, core circles, code efficiency, ...

  7. Game Performance Evaluation in Male Goalball Players.

    Science.gov (United States)

    Molik, Bartosz; Morgulec-Adamowicz, Natalia; Kosmol, Andrzej; Perkowski, Krzysztof; Bednarczuk, Grzegorz; Skowroński, Waldemar; Gomez, Miguel Angel; Koc, Krzysztof; Rutkowska, Izabela; Szyman, Robert J

    2015-11-22

    Goalball is a Paralympic sport exclusively for athletes who are visually impaired and blind. The aims of this study were twofold: to describe game performance of elite male goalball players based upon the degree of visual impairment, and to determine if game performance was related to anthropometric characteristics of elite male goalball players. The study sample consisted of 44 male goalball athletes. A total of 38 games were recorded during the Summer Paralympic Games in London 2012. Observations were reported using the Game Efficiency Sheet for Goalball. Additional anthropometric measurements included body mass (kg), body height (cm), the arm span (cm) and length of the body in the defensive position (cm). The results differentiating both groups showed that the players with total blindness obtained higher means than the players with visual impairment for game indicators such as the sum of defense (p = 0.03) and the sum of good defense (p = 0.04). The players with visual impairment obtained higher results than those with total blindness for attack efficiency (p = 0.04), the sum of penalty defenses (p = 0.01), and fouls (p = 0.01). The study showed that athletes with blindness demonstrated higher game performance in defence. However, athletes with visual impairment presented higher efficiency in offensive actions. The analyses confirmed that body mass, body height, the arm span and length of the body in the defensive position did not differentiate players' performance at the elite level.

  8. PERFORMANCE EVALUATION OF A DRYER FOR PROCESSED ...

    African Journals Online (AJOL)

    thinkexploitsint'l

    ABSTRACT. Drying of fresh fermented locust beans condiments is highly important in marketing strategy. Performance test of the dryer for processed locust beans condiments (Iru) was carried out using an instrumented dryer designed and developed, this was used to dry two varieties of fermented locust beans (Iru Woro of ...

  9. Game Performance Evaluation in Male Goalball Players

    Science.gov (United States)

    Molik, Bartosz; Morgulec-Adamowicz, Natalia; Kosmol, Andrzej; Perkowski, Krzysztof; Bednarczuk, Grzegorz; Skowroński, Waldemar; Gomez, Miguel Angel; Koc, Krzysztof; Rutkowska, Izabela; Szyman, Robert J

    2015-01-01

    Goalball is a Paralympic sport exclusively for athletes who are visually impaired and blind. The aims of this study were twofold: to describe game performance of elite male goalball players based upon the degree of visual impairment, and to determine if game performance was related to anthropometric characteristics of elite male goalball players. The study sample consisted of 44 male goalball athletes. A total of 38 games were recorded during the Summer Paralympic Games in London 2012. Observations were reported using the Game Efficiency Sheet for Goalball. Additional anthropometric measurements included body mass (kg), body height (cm), the arm span (cm) and length of the body in the defensive position (cm). The results differentiating both groups showed that the players with total blindness obtained higher means than the players with visual impairment for game indicators such as the sum of defense (p = 0.03) and the sum of good defense (p = 0.04). The players with visual impairment obtained higher results than those with total blindness for attack efficiency (p = 0.04), the sum of penalty defenses (p = 0.01), and fouls (p = 0.01). The study showed that athletes with blindness demonstrated higher game performance in defence. However, athletes with visual impairment presented higher efficiency in offensive actions. The analyses confirmed that body mass, body height, the arm span and length of the body in the defensive position did not differentiate players’ performance at the elite level. PMID:26834872

  10. Game Performance Evaluation in Male Goalball Players

    Directory of Open Access Journals (Sweden)

    Molik Bartosz

    2015-12-01

    Full Text Available Goalball is a Paralympic sport exclusively for athletes who are visually impaired and blind. The aims of this study were twofold: to describe game performance of elite male goalball players based upon the degree of visual impairment, and to determine if game performance was related to anthropometric characteristics of elite male goalball players. The study sample consisted of 44 male goalball athletes. A total of 38 games were recorded during the Summer Paralympic Games in London 2012. Observations were reported using the Game Efficiency Sheet for Goalball. Additional anthropometric measurements included body mass (kg, body height (cm, the arm span (cm and length of the body in the defensive position (cm. The results differentiating both groups showed that the players with total blindness obtained higher means than the players with visual impairment for game indicators such as the sum of defense (p = 0.03 and the sum of good defense (p = 0.04. The players with visual impairment obtained higher results than those with total blindness for attack efficiency (p = 0.04, the sum of penalty defenses (p = 0.01, and fouls (p = 0.01. The study showed that athletes with blindness demonstrated higher game performance in defence. However, athletes with visual impairment presented higher efficiency in offensive actions. The analyses confirmed that body mass, body height, the arm span and length of the body in the defensive position did not differentiate players’ performance at the elite level.

  11. Numerical and experimental evaluation of performance of ...

    Indian Academy of Sciences (India)

    A comparison of the performance of Type-1 seal has been made with that of conventional one (Type-2) in view of economy of construction and better sealing with minimal expense of power consumption. A test rig that allows for varying the major geometrical and operating parameters was designed and tests were ...

  12. WirelessHART modeling and performance evaluation

    NARCIS (Netherlands)

    Remke, Anne Katharina Ingrid; Wu, Xian

    2013-01-01

    In process industries wired supervisory and control networks are more and more replaced by wireless systems. Wireless communication inevitably introduces time delays and message losses, which may degrade the system reliability and performance. WirelessHART, as the first international standard for

  13. A GENERAL REVIEW AND PERFORMANCE EVALUATION OF ...

    African Journals Online (AJOL)

    This paper comparatively assessed the performance status of seven different multi-level converters with respect to their output voltages, output currents and corresponding percentage total harmonic distortion under the same RL-load condition. The spectral distributions of these various multi-level converters' waveforms ...

  14. Performance evaluation of automatic voltage regulators ...

    African Journals Online (AJOL)

    Performance of various Automatic Voltage Regulators (AVR's) in Nigeria and the causes of their inability to regulate at their set points have been investigated. The result indicates that the imported AVRs fail to give the 220 volts as displayed on the name plate at the specified low set point (such as 100, 120 volts etc) on ...

  15. performance evaluation of evolutionary designed conventional AGC ...

    African Journals Online (AJOL)

    In this context, the tuning of a multi-area automatic generation control (AGC) system after deregulation and furthermore, the effect of reheat turbines dynamics in the power system performance, are not yet discussed in depth and are studied in this work. The effect of bilateral contracts on the dynamics of the system is taken ...

  16. 75 FR 21349 - Solicitation for a Cooperative Agreement-Evaluation of Technical Assistance for Evidence-Based...

    Science.gov (United States)

    2010-04-23

    ... decades of research on the factors that contribute to criminal re-offending and the processes and methods...--Evaluation of Technical Assistance for Evidence-Based Decisionmaking in Local Criminal Justice Systems AGENCY... Phase II of the Evidence-Based Decisionmaking in Local Criminal Justice Systems project. The purpose of...

  17. Emergency Physician Performed Ultrasound for DVT Evaluation

    Directory of Open Access Journals (Sweden)

    John Christian Fox

    2011-01-01

    Full Text Available Deep vein thrombosis is a common condition that is often difficult to diagnose and may be lethal when allowed to progress. However, early implementation of treatment substantially improves the disease prognosis. Therefore, care must be taken to both acquire an accurate differential diagnosis for patients with symptoms as well as to screen at-risk asymptomatic individuals. Many diagnostic tools exist to evaluate deep vein thrombosis. Compression ultrasonography is currently the most effective diagnostic tool in the emergency department, shown to be highly accurate at minimal expense. However, limited availability of ultrasound technicians may result in delayed imaging or in a decision not to image low-risk cases. Many studies support emergency physiciansas capable of accurately diagnosing deep vein thrombosis using bedside ultrasound. Further integration of ultrasound into the training of emergency physicians for use in evaluating deep vein thrombosis will improve patient care and cost-effective treatment.

  18. Technical-evaluation report on the proposed technical-specification changes on degraded grid-voltage protection for the Rancho Seco Nuclear Generating Plant (Docket No. 50-312)

    International Nuclear Information System (INIS)

    Selan, J.C.

    1983-01-01

    This Technical Evaluation Report is a revision and contains supplemental information to the Technical Evaluations documented in previous LLNL reports dated October 1980 (UCID-18690), November 10, 1981 (UCID-19113), and July 15, 1983 (UCID-19708). These reports encompass the NRC requirements on Degraded Grid Voltage Protection and Adequacy of Station Electric Distribution System Voltages. The evaluation finds that the proposed Technical Specification changes on the undervoltage/overvoltage trip setpoints and Limiting Conditions for Operation provide the required protection to the Class 1E Equipment from sustained abnormal voltages

  19. NPSAG/NKS: Interpretation and evaluation of the technical specification criteria

    Energy Technology Data Exchange (ETDEWEB)

    Baeckstroem, O.; Haeggstroem, A. (Relcon Scandpower AB, Sundbyberg (Sweden)); Simola, K. (VTT (Finland))

    2008-07-15

    The use of risk-informed methods has been discussed since the late 1980s. in the Nordic countries. However, at that time the industry and authorities were not ready for the use of these methods and the use of them have been limited. The common understanding right now is that the industry and authorities are ready for adoption of risk-informed strategies, and the use of risk informed methods in daily operation at the nuclear power plants (NPPs) as well as for long term evaluation and definition of rules and regulations is increasing. The authorities are strengthening the rules and regulations with regard to redundancy and diversification in the safety systems. There are several ongoing projects at the NPPs, such as modernization, power upgrade etc. These projects will require modification of the Technical Specifications (TS). The requirements on a risk analysis to verify exceptions will be a natural part of the TS update. To summarize; there are both activities and trends at the plants that will result in TS changes (modernizations, increase of electrical power, risk informed strategies). At the same time, authorities are increasing the requirements on risk informed evaluation of the TS. TS evaluation from a risk point of view raises several questions: 1) How shall the TS conditions be evaluated? 2) What aspects shall be taken into consideration? 3) Can a prolonged/shortened surveillance test interval (STI) or allowed outage time (AOT) affect the experienced importance of the equipment? 4) What do the conditions in the TS with regard to AOT really represent? Are they conditions that shall be used when spare part storage and/or maintenance strategies are developed or do they represent how a real situation (unavailable component) shall be managed? To form an idea of the opinion on these questions phase 1 of the project is based on a literature study and interviews with persons at the Swedish and Finnish utilities and authorities. A short background to the current TS

  20. Anthropometric characteristics, physical fitness and technical performance of under-19 soccer players by competitive level and field position

    DEFF Research Database (Denmark)

    Rebelo, A; Brito, J; Maia, J

    2013-01-01

    Anthropometric characteristics, physical fitness and technical skills of under-19 (U19) soccer players were compared by competitive level (elite, n=95; non-elite, n=85) and playing position (goalkeeper, central defender, fullback, midfield, forward). Fitness tests included 5- and 30-m sprints...... and ball control tests (d>1.2). Elite players presented better agility and Yo-Yo IE2 performances than non-elite players within all positional roles (d>0.6). In conclusion, U19 players differed in anthropometric characteristics, physical fitness and technical skills by competitive level within field......, agility, squat jump (SJ) and countermovement jump (CMJ), strength and Yo-Yo intermittent endurance test level 2 (Yo-Yo IE2). Soccer-specific skills included ball control and dribbling. Independent of position, elite players presented more hours of training per year than non-elite players (d>1.2). Stature...