WorldWideScience

Sample records for technical overview part

  1. Digital radiography detectors - A technical overview: Part 1

    International Nuclear Information System (INIS)

    Lanca, Luis; Silva, Augusto

    2009-01-01

    During the last two decades screen-film (SF) systems have been replaced by digital X-ray systems. The advent of digital technologies brought a number of digital solutions based on different detector and readout technologies. Improvements in technology allowed the development of new digital technologies for projection radiography such as computed radiography (CR) and digital radiography (DR). The large number of scientific papers concerning digital X-ray systems that have been published over the last 25 years indicates the relevance of these technologies in healthcare. There are important differences among different detector technologies that may affect system performance and image quality for diagnostic purposes. Radiographers are expected to have an effective understanding of digital X-ray technologies and a high level of knowledge and awareness concerning the capabilities of these systems. Patient safety and reliable diagnostic information are intrinsically linked to these factors. In this review article - which is the first of two parts - a global overview of the digital radiography systems (both CR and DR) currently available for clinical practice is provided

  2. VANDAL technical overview

    International Nuclear Information System (INIS)

    Unsworth, M.D.

    1989-07-01

    This document is concerned with the technicalities of the VANDAL code and covers the technical details of each of the systems modules in turn. Covered are SAMPLING, FLOW, VAULT, GEOSPHERE, BIOSPHERE and TIMESTEPPING. (author)

  3. HNSciCloud - Overview and technical Challenges

    Science.gov (United States)

    Gasthuber, Martin; Meinhard, Helge; Jones, Robert

    2017-10-01

    HEP is only one of many sciences with sharply increasing compute requirements that cannot be met by profiting from Moore’s law alone. Commercial clouds potentially allow for realising larger economies of scale. While some small-scale experience requiring dedicated effort has been collected, public cloud resources have not been integrated yet with the standard workflows of science organisations in their private data centres; in addition, European science has not ramped up to significant scale yet. The HELIX NEBULA Science Cloud project - HNSciCloud, partly funded by the European Commission, addresses these points. Ten organisations under CERN’s leadership, covering particle physics, bioinformatics, photon science and other sciences, have joined to procure public cloud resources as well as dedicated development efforts towards this integration. The HNSciCloud project faces the challenge to accelerate developments performed by the selected commercial providers. In order to guarantee cost efficient usage of IaaS resources across a wide range of scientific communities, the technical requirements had to be carefully constructed. With respect to current IaaS offerings, dataintensive science is the biggest challenge; other points that need to be addressed concern identity federations, network connectivity and how to match business practices of large IaaS providers with those of public research organisations. In the first section, this paper will give an overview of the project and explain the findings so far. The last section will explain the key points of the technical requirements and present first results of the experience of the procurers with the services in comparison to their’on-premise’ infrastructure.

  4. Exploration Medical System Technical Architecture Overview

    Science.gov (United States)

    Cerro, J.; Rubin, D.; Mindock, J.; Middour, C.; McGuire, K.; Hanson, A.; Reilly, J.; Burba, T.; Urbina, M.

    2018-01-01

    The Exploration Medical Capability (ExMC) Element Systems Engineering (SE) goals include defining the technical system needed to support medical capabilities for a Mars exploration mission. A draft medical system architecture was developed based on stakeholder needs, system goals, and system behaviors, as captured in an ExMC concept of operations document and a system model. This talk will discuss a high-level view of the medical system, as part of a larger crew health and performance system, both of which will support crew during Deep Space Transport missions. Other mission components, such as the flight system, ground system, caregiver, and patient, will be discussed as aspects of the context because the medical system will have important interactions with each. Additionally, important interactions with other aspects of the crew health and performance system are anticipated, such as health & wellness, mission task performance support, and environmental protection. This talk will highlight areas in which we are working with other disciplines to understand these interactions.

  5. The Next-Generation Very Large Array: Technical Overview

    Science.gov (United States)

    McKinnon, Mark; Selina, Rob

    2018-01-01

    As part of its mandate as a national observatory, the NRAO is looking toward the long range future of radio astronomy and fostering the long term growth of the US astronomical community. NRAO has sponsored a series of science and technical community meetings to consider the science mission and design of a next-generation Very Large Array (ngVLA), building on the legacies of the Atacama Large Millimeter/submillimeter Array (ALMA) and the Very Large Array (VLA).The basic ngVLA design emerging from these discussions is an interferometric array with approximately ten times the sensitivity and ten times higher spatial resolution than the VLA and ALMA radio telescopes, optimized for operation in the wavelength range 0.3cm to 3cm. The ngVLA would open a new window on the Universe through ultra-sensitive imaging of thermal line and continuum emission down to milli-arcsecond resolution, as well as unprecedented broadband continuum polarimetric imaging of non-thermal processes. The specifications and concepts for major ngVLA system elements are rapidly converging.We will provide an overview of the current system design of the ngVLA. The concepts for major system elements such as the antenna, receiving electronics, and central signal processing will be presented. We will also describe the major development activities that are presently underway to advance the design.

  6. Civil forensic psychiatry - Part 1: an overview.

    Science.gov (United States)

    Samuels, Anthony H

    2018-02-01

    Objectives This paper provides an overview for general and forensic psychiatrists of the complexity and challenge of working in the civil medico-legal arena. It covers expert evidence, ethics, core concepts in civil forensic psychiatry and report writing. Conclusions Civil forensic psychiatry is an important sub-speciality component of forensic psychiatry that requires specific skills, knowledge and the ability to assist legal bodies in determining the significance of psychiatric issues.

  7. Literature overview for greenhouse effect part VI

    International Nuclear Information System (INIS)

    Orthofer, R.; Nevyjel, A.

    1997-10-01

    On behalf of the Austrian Federal Ministry of Environment, Youth and Family Affairs the current scientific and technical literature in the subject area of greenhouse effect and global climatic change is investigated by performing quarterly on-line retrieval searches in the databases Compendex, Enviroline, NTIS and ULIT. This report contains the research results of the period of September to December 1996. From the observed 199 citations the most significant 50 citations were selected, evaluated and summarised in a literature review. Relevant topics are (1) research on causes, effects and modelling, (2) possible agricultural, technical, economic and political control measures, (3) strategies and actions taken in various countries, and (4) international co-ordination. The review is based on the abstracts from the databases and for the most interesting publications - from the original literature. Five similar reports have been published previously which cover the literature since January 1994. (author)

  8. Human genome program report. Part 1, overview and progress

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This report contains Part 1 of a two-part report to reflect research and progress in the U.S. Department of Energy Human Genome Program from 1994 through 1996, with specified updates made just before publication. Part 1 consists of the program overview and report on progress.

  9. Digital dental photography. Part 1: an overview.

    Science.gov (United States)

    Ahmad, I

    2009-04-25

    This paper is the first article in a new ten-part series on digital dental photography. Part 1 previews and outlines the contents of the subsequent papers and in addition, defines the aims and objectives of a digital dental image and the features that are required for an ideal intra-oral picture.

  10. 36 CFR Appendix D to Part 1191 - Technical

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Technical D Appendix D to Part 1191 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS COMPLIANCE...; ARCHITECTURAL BARRIERS ACT (ABA) ACCESSIBILITY GUIDELINES Pt. 1191, App. D Appendix D to Part 1191—Technical...

  11. Philosophical and Sociological Overview of Vocational Technical Education in Nigeria

    Science.gov (United States)

    Kennedy, Odu Oji

    2012-01-01

    Vocational Technical Education is any kind of education which has the main purpose of preparing one for employment in recognized occupation. The foundation of vocational technical education is based on philosophy which was mainly established for self-employment and self-reliance of the individual(s) who partake in it. Viewing the philosophy and…

  12. Technical means overview of the oversize cargoes customs control

    Directory of Open Access Journals (Sweden)

    Dukhnitskiy P.S.

    2016-11-01

    Full Text Available this article focuses on the technical means used by the customs authorities when they control oversize cargoes. Customs inspection efficiency improvement as one of the main forms of customs control during the implementation of sampling is possible by the use of technical means of customs control.

  13. Technical means overview of the oversize cargoes customs control

    OpenAIRE

    Dukhnitskiy P.S.

    2016-01-01

    this article focuses on the technical means used by the customs authorities when they control oversize cargoes. Customs inspection efficiency improvement as one of the main forms of customs control during the implementation of sampling is possible by the use of technical means of customs control.

  14. New technical solutions in nanotechnology. Part 3

    Directory of Open Access Journals (Sweden)

    IVANOV Leonid Alexeevich

    2016-08-01

    Full Text Available The new technical solutions including inventions in the area of nanotechnology and nanomaterials are efficiently applied in communal and housing services as well as in construction and other joint fields. The invention «Nanomodified epoxy binder for composite materials (RU 2584013» refers to the production of composite materials based on fiber fillers and nanomodified epoxy binder and can be used for manufacture of glass-fiber tubes and other articles for which winding method is used and which are employed in heat networks, hot water supply with delivery method, water supply systems where the temperature can achieve 150°С. Nanomodified epoxy binder for composite materials includes epoxy diane resin and amine hardening agent. The technical result is shorter period of binder hardening, increased heat-resistance and strength characteristics of cured compositions, extended assortment of epoxy compositions with improved technological and performance properties. The specialists may be also interested in the following inventions: composite material based on alloys of the system sn-sb-cu and the method to produce it (RU 2585588, nanomodified epoxy sphere plastic (RU 2587454, the method to produce glass articles with conductive surface (RU 2586123, the method to produce carbon nanotubes with controlled surface density (RU 2569548, solar energy plant (RU 2586034, the method to purify surface and undeground water from titanium and its compounds by means of carbon nanotubes and ultrasound (RU 2575029, elastomeric nanocomposites, compositions of nanocomposites and the methods to produce them (RU 2561170, the method to set heat-resistant pressure sensor based on thin-film nano- and microelectromechanical system (RU 2581454, the method to determine cytotoxicity of nanomaterials based on zinc oxide (RU 2587630, the method to produce nanocores of manganese dioxide (RU 2587439, the method to determine material characteristics by means of nanoindentatio (RU

  15. New technical solutions in nanotechnology. Part 2

    Directory of Open Access Journals (Sweden)

    IVANOV Leonid Alexeevich

    2016-06-01

    Full Text Available The new technical solutions including inventions in the area of nanotechnology and nanomaterials are efficiently applied in communal and housing services as well as in construction and other joint fields. The invention «The diagnostics method for defects on the metal surfaces (RU 2581441» refers to the methods used to detect defects and cracks on the surface of metal equipment and pipe lines. The suspension of metal nanoparticles is consistently applied on the surface of controlled object following direction from the bigger diameter to the smaller one. The nanoparticles possess the photoluminescence property and their shape is spheric with different diameters. After each application the surface is dried and excessive particles are removed. Then rowwise scanning of object surface is executed with the ray of femtosecond laser and at the same time the intensity of the two-photon luminescence signal is registered in every studied area fixing the location of this area and obtaining the map of glow intensity distribution of nanoparticles exited by the laser radiation. The maps shows the zones with the maximal glow intensity, the coor dinates and shape of the determined glow zone make it possible to determine the coordinates and shape of the defect and the size of its intersection is considered to be equal to relative diameter of the applied nanoparticles at this application stage. The technical stage is increased reliability and credibility of the study. The specialists may be also interested in the following inventions: the method to produce forged pieces from fire-resistant granulated alloys (RU 2583564; the method to produce nanocomposite with double shape memory effect based on monocrystals of ferromagnetic alloy (RU 2583560; the method to produce nanostructured titanium-nickel-zirconium coatings with shape memory (RU 2583222; the method to produce nanocomposites based on golden nanoparticles covered with coating of silica oxide and quantum

  16. New technical solutions in nanotechnology. Part 4

    Directory of Open Access Journals (Sweden)

    IVANOV Leonid Alexeevich

    2016-10-01

    Full Text Available The new technical solutions including inventions in the area of nanotechnology and nanomaterials are efficiently applied in communal and housing services as well as in construction and other joint fields. The invention «The method to produce binder based on phenolformaldehyde resol resin for stratified material, binder and stratified material based on binder and reinforcing fiber base (RU 2594014» refers to polymer composite materials that can be used in manufacture of products designed for aircraft, construction, automobile and household industries. This method is based on component mixing. Resin and fospoliol are taken in dissolvent that is a mix of ethyl alcohol and dimethylformamide. This is the ratio of the components (mass.%: resin – 23,7, dissolvent – 75,3, fospoliol – 1,0. Nanomodifier – mechanically activated diamond - is dispersed into the obtained mixture. The mechanically activated diamond is produced in ball crusher when ration of ball mass and initial detonation nanodiamond is 20:1 respectively and the speed of ball rotation is 900 rotations per minute for 5 minutes. Stratified material based on binder and reinforcing paper fiber is based on aromatic polyamide and possesses finishing layer which composition contents polyamide, ethyl alcohol and water. The binder is applied evenly on the surface of finishing layer, its quantity is equal to the mass of fibers. The technical result is the binder on the basis of phenolformaldehyde resin without volatile flammable liquid and high-toxic substances, 3 times increased shift voltage for compressed products made of stratified materials and 1,3 time decreased inflammability of them. The specialists may be also interested in the following nanotechnological inventions: the method to produce carbon nanostructures modified by metal (RU 2593875; the method of deep purification of monosilane (RU 2593634; the method to produce conductive reticular micro- and nanostructures and the

  17. Low-level waste management program: technical program overview

    International Nuclear Information System (INIS)

    Lowrie, R.S.

    1981-01-01

    The mission of the technical program is to develop the technology component of the Department of Energy's Low-Level Waste Management Program and to manage research and development, demonstration, and documentation of the technical aspects of the program. Some of the major technology objectives are: develop and demonstrate techniques for waste generation reduction; develop and demonstrate waste treatment, handling and packaging techniques; develop and demonstrate the technology for greater confinement; and develop the technology for remedial action at existing sites. In addition there is the technology transfer objective which is to compile and issue a handbook documenting the technology for each of the above technology objectives

  18. Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

    Science.gov (United States)

    Castner, Ray

    2012-01-01

    The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

  19. The NASA Electronic Parts and Packaging (NEPP) Program: An Overview

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2016-01-01

    This presentation provides an overview of the NEPP Program. The NEPP Mission is to provide guidance to NASA for the selection and application of microelectronics technologies; Improve understanding of the risks related to the use of these technologies in the space environment; Ensure that appropriate research is performed to meet NASA mission assurance needs. NEPP's Goals are to provide customers with appropriate and cost-effective risk knowledge to aid in: Selection and application of microelectronics technologies; Improved understanding of risks related to the use of these technologies in the space environment; Appropriate evaluations to meet NASA mission assurance needs; Guidelines for test and application of parts technologies in space; Assurance infrastructure and support for technologies in use by NASA space systems.

  20. A technical overview of air pollution problems and its control

    International Nuclear Information System (INIS)

    Rusheed, A.

    1997-01-01

    Air pollution is a well known phenomenon experienced in every day life. The air we breathe consist of gases and aerosol particles on which pollutants such as toxic elements and bacteria reside. These microscopic particles are transported to long distances from the source of origin the direction and magnitude of which depends upon the prevailing meteorological conditions. In order to assess the impact of air pollution, systematic studies are carried out which consist of: 1) sampling of air, 2) measurement of pollutants, 3) identification of pollutant source and 4) adoption of control methods. Each of these topics are fairly exhaustive and their understanding requires accurate scientific approach. An overview of these topic has been presented in this talk. Air samples are best collected by filtering air through suitable medium and analyses are carried out by diverse analytical techniques. Source identifications is a very important step which is done either by emission modeling or receptor modeling techniques. A general survey of these techniques, especially receptor modeling is presented in this talk. The control of air pollution is carried out by using carried devices and the processes especially developed for this purpose. Air pollution has given rise to a number of global problems such as depletion of stratospheric ozone, acid rain and greenhouse effect, which are being tackled on international scale. These problems have been discussed very briefly and a summary of international efforts has been presented. (author)

  1. Overview of clustered nuclear siting and its technical aspects

    International Nuclear Information System (INIS)

    Meier, P.M.

    1976-09-01

    In recent years there has been growing discussion over the ability of new siting approaches to redress the increasing problems of nuclear plant location. This debate has focused largely on three alternatives to the conventional siting of nuclear reactors; floating offshore plants; underground siting; and nuclear energy centers (NECs) consisting of up to 40 reactors at a single site, and, possibly, including fuel cycle facilities within their perimeter. Congressional interest in energy centers, especially in view of concern over the proliferation of nuclear reactors throughout the country, and with the special problems of safeguards over fuel reprocessing and the use of plutonium as a reactor fuel, resulted in a mandate to the Nuclear Regulatory Commission to make a comprehensive analysis of the energy center concept. A common finding of all of the studies of the nuclear energy center concept thus far is that there appear to be no technical considerations that would clearly preclude energy centers. With the one significant exception regarding the meteorological impacts of the concentration of heat and moisture releases to the atmosphere, engineering solutions would appear to be quite adequate to address any difficulties of environmental impact, electrical systems management, water supply or construction management, and to keep the overall physical environmental impact of an energy center not significantly different to that of an equivalent number of dispersed reactors

  2. Melt processing of radioactive waste: A technical overview

    International Nuclear Information System (INIS)

    Schlienger, M.E.; Buckentin, J.M.; Damkroger, B.K.

    1997-01-01

    Nuclear operations have resulted in the accumulation of large quantities of contaminated metallic waste which are stored at various DOE, DOD, and commercial sites under the control of DOE and the Nuclear Regulatory Commission (NRC). This waste will accumulate at an increasing rate as commercial nuclear reactors built in the 1950s reach the end of their projected lives, as existing nuclear powered ships become obsolete or unneeded, and as various weapons plants and fuel processing facilities, such as the gaseous diffusion plants, are dismantled, repaired, or modernized. For example, recent estimates of available Radioactive Scrap Metal (RSM) in the DOE Nuclear Weapons Complex have suggested that as much as 700,000 tons of contaminated 304L stainless steel exist in the gaseous diffusion plants alone. Other high-value metals available in the DOE complex include copper, nickel, and zirconium. Melt processing for the decontamination of radioactive scrap metal has been the subject of much research. A major driving force for this research has been the possibility of reapplication of RSM, which is often very high-grade material containing large quantities of strategic elements. To date, several different single and multi-step melting processes have been proposed and evaluated for use as decontamination or recycling strategies. Each process offers a unique combination of strengths and weaknesses, and ultimately, no single melt processing scheme is optimum for all applications since processes must be evaluated based on the characteristics of the input feed stream and the desired output. This paper describes various melt decontamination processes and briefly reviews their application in developmental studies, full scale technical demonstrations, and industrial operations

  3. Gender Issues in Technical Communication Studies: An Overview of the Implications for the Profession, Research, and Pedagogy.

    Science.gov (United States)

    Allen, Jo

    1991-01-01

    Presents an overview of research and unanswered questions related to gender issues in technical communication. Addresses the consequences of the feminization of technical communication, research on gender differences in technical communication, and the means for encouraging a more gender-balanced view of business and industry. (SR)

  4. Mexico; Financial Sector Assessment Program Update: Technical Note: Derivatives Market: Overview and Potential Vulnerabilities

    OpenAIRE

    International Monetary Fund

    2007-01-01

    This technical note provides an overview of Mexico’s derivatives markets, and describes concisely the derivatives regulatory framework and risk management practices in financial institutions active in these markets. The most important derivatives market in Mexico is the over-the-counter (OTC) derivatives market, which is fully integrated with the global derivatives market. The origin of the OTC derivatives market can be traced back to the 1994 Mexican crisis that forced Mexico to abandon its ...

  5. An overview of training and technical communication of Chinese representative nuclear power engineering company of EPC mode

    International Nuclear Information System (INIS)

    Qi Ting; Zhang Xiangyu

    2015-01-01

    After the Fukushima severe accident, nuclear power development has been in stagnation in all over the world. The Chinese nuclear industry has a slowdown on new NPP construction. As a result, high level technique on safety and effective communication are required. For nuclear power engineering company with EPC mode, high quality on training and technical communication is the principal investment in order to achieve better service on engineering design, environmental impact assessment, environmental engineering design, and equipment supervision and so on. EPC mode requires wide range knowledge on almost every field related to nuclear on nuclear power engineering. In this paper, the author investigated the case of the only nuclear power engineering EPC company (CNPE) in China and present an overview on its training and technical communication both domestic and abroad. Basically, there are 4 main branches of training. The internal training focuses on specifically task (both management and technique), such as HSE training, QC training and quality and safety training. Long term education in the university is organized by cooperated mechanism. Code and platform training is partly carried out by international organization or company, and the experienced engineers coach makes up the other part. The communication is a large part since the EPC mode needs the information and requirements from the NPP entity, authority, and the other institutes, international organizations (like IAEA, NINE, IRSN, OECD, NRC and CEA etc.) and sometimes the public. The overview of the training and communication of the EPC company prevails the outline of its advantage on domestic communication and disadvantage on international technical communication. The paper can be a tool on the soft strength construction of company under EPC mode to broaden its business like consultation and training. Some advice is given by the author on the consultation and global communication in the future. (author)

  6. Review of the technical bases of 40 CFR Part 190.

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, John E.; McMahon, Kevin A.; Siegel, Malcolm Dean; Weiner, Ruth F.; Bixler, Nathan E.; Klein, Keith A. (Longenecker and Associates)

    2010-07-01

    The dose limits for emissions from the nuclear fuel cycle were established by the Environmental Protection Agency in 40 CFR Part 190 in 1977. These limits were based on assumptions regarding the growth of nuclear power and the technical capabilities of decontamination systems as well as the then-current knowledge of atmospheric dispersion and the biological effects of ionizing radiation. In the more than thirty years since the adoption of the limits, much has changed with respect to the scale of nuclear energy deployment in the United States and the scientific knowledge associated with modeling health effects from radioactivity release. Sandia National Laboratories conducted a study to examine and understand the methodologies and technical bases of 40 CFR 190 and also to determine if the conclusions of the earlier work would be different today given the current projected growth of nuclear power and the advances in scientific understanding. This report documents the results of that work.

  7. The NASA Electronic Parts and Packaging (NEPP) Program: Overview and Update FY15 and Beyond

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2016-01-01

    The NASA Electronic Parts and Packaging (NEPP) program, and its subset the NASA Electronic Parts Assurance Group (NEPAG), are NASA's point-of-contacts for reliability and radiation tolerance of electrical, electronic, and electromechanical (EEE) parts and their packages. This presentation includes a Fiscal Year 2015 program overview.

  8. Students seeking technical internships as part of an exchange program

    OpenAIRE

    Nystrom, Lynn A.

    2004-01-01

    Virginia Tech students are seeking the support of research centers, academic departments, and area businesses to provide opportunities for technical internships through the International Association for the Exchange of Students for Technical Experience (IAESTE).

  9. Nordic study on reactor waste. Technical part 1 and 2

    International Nuclear Information System (INIS)

    1981-08-01

    An important part of the Nordic studies on system- and safety analysis of the management of low and medium level radioactive waste from nuclear power plants, is the safety analysis of a Reference System. This reference system was established within the study and is described in this Technical Part 1. The reference system covers waste management Schemes that are potential possibilities in either one of the four participating Nordic countries. The reference system is based on: a power reactor system consisting of 6 BWR's of 500 MWe each, operated simultaneously over the same 30 year period, and deep bed granular ion exchange resin wastes from the Reactor Water Clean-Up System (RWCS and powdered ion exchange resin from the Spent Fuel Pool Cleanup System (SFPCS)). Both waste types are supposed to be solidified by mixing with cement and bitumen. Two basic types of containers are considered. Standard 200 liter steel drums and specially made cubicreinforced concrete moulds with a net volume of 1 m 3 . The Nordic study assumes temporary storage of the solidified waste for a maximum of 50 years before the waste is transferred to the disposal site. Transportation of the waste from the storage facilitiy to the disposal site will be by road or sea. Three different disposal facilities are considered: Shallow land burial, near surface concrete bunker, and rock cavern with about 30 m granite cover. (EG)

  10. Space Telecommunications Radio System (STRS) Architecture. Part 1; Tutorial - Overview

    Science.gov (United States)

    Handler, Louis M.; Briones, Janette C.; Mortensen, Dale J.; Reinhart, Richard C.

    2012-01-01

    Space Telecommunications Radio System (STRS) Architecture Standard provides a NASA standard for software-defined radio. STRS is being demonstrated in the Space Communications and Navigation (SCaN) Testbed formerly known as Communications, Navigation and Networking Configurable Testbed (CoNNeCT). Ground station radios communicating the SCaN testbed are also being written to comply with the STRS architecture. The STRS Architecture Tutorial Overview presents a general introduction to the STRS architecture standard developed at the NASA Glenn Research Center (GRC), addresses frequently asked questions, and clarifies methods of implementing the standard. The STRS architecture should be used as a base for many of NASA s future telecommunications technologies. The presentation will provide a basic understanding of STRS.

  11. Nuclear Energy Center Site Survey, 1975. Part III. Technical considerations

    International Nuclear Information System (INIS)

    1976-01-01

    Studies of the technical feasibility of nuclear energy centers (NECs) and the comparison between NEC technical feasibility and that of nuclear facilities on dispersed sites are reviewed. The conclusions related to technical feasibility of NEC are summarized. Technical feasibility was found to rest mainly on five major issues: heat dissipation, transmission, facility construction, radiological impact, and environmental impact. Although general conclusions can be reached in these five areas, it is recognized that they are interdependent, and detailed site-by-site analysis will be necessary. Some general conclusions on technical feasibility of NECs are presented, then detailed conclusions derived from the technical evaluation of NECs compared to dispersed site facilities are presented. The findings of this study on each of the five major feasibility issues are then discussed in sequence. The study concludes that nuclear energy centers, as defined herein, are technically feasible

  12. Structured settlement annuities, part 1: overview and the underwriting process.

    Science.gov (United States)

    Schmidt, C J; Singer, R B

    2000-01-01

    Structured settlement underwriting is the underwriting of medically impaired lives for the purchase of an annuity to fund the settlement. Other than risk assessment, structured settlement (SS) underwriting has little in common with traditional life insurance underwriting. Most noteworthy of these differences is the relative lack of actuarial data on which to base decisions about mortality and the necessity for prospective thinking about risk assessment. The purpose of this paper is to provide a foundation for understanding the structured settlement business and to contrast the underwriting of structured settlements with that of traditional life insurance. This is the first part of a two-part article on SS annuities. Part 2 deals with the mortality experience in SS annuitants and the life-table methodology used to calculate life expectancy for annuitants at increased mortality risk.

  13. Commercial Building Energy Asset Score Program Overview and Technical Protocol (Version 1.1)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na; Goel, Supriya; Makhmalbaf, Atefe

    2013-08-09

    The U.S. Department of Energy (DOE) is developing a voluntary national scoring system for commercial buildings to help building owners and managers assess a building’s energy-related systems independent of operations. The goal of the score is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system, known as the Commercial Building Energy Asset Score, will allow building owners and managers to compare their building infrastructure against peers and track building upgrades over time. The system will also help other building stakeholders (e.g., building investors, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset scoring tool. The alternative methods that were considered prior to developing the current approach are described in the Program Overview and Technical Protocol Version 1.0.

  14. The NASA Electronic Parts and Packaging (NEPP) Program: NEPP Overview - Automotive Electronics

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2016-01-01

    The results of NASAs studies into the appropriateness of using U.S. Automotive electronic parts in NASA spaceflight systems will be presented. The first part of the presentation provides an overview of the United States Automotive Electronics Council's AECQ standardization program, the second part provides a summary of the results of NASA's procurement and testing experiences and other lessons learned along with preliminary test results.

  15. Mineral deposits research in Uruguay. Technical economic part

    International Nuclear Information System (INIS)

    Raabe, W.

    1959-01-01

    Technical researches, mineralogical and chemical analysis were carried out in Zapucay and Iman deposit located in Uruguay south America, as a result of that, researchers was described the mineral adherences of the deposits.

  16. Conversion of research and test reactors to low enriched uranium fuel: technical overview and program status

    International Nuclear Information System (INIS)

    Roglans-Ribas, J.

    2008-01-01

    Many of the nuclear research and test reactors worldwide operate with high enriched uranium fuel. In response to worries over the potential use of HEU from research reactors in nuclear weapons, the U.S Department of Energy (DOE) initiated a program - the Reduced Enrichment for Research and Test Reactors (RERTR) - in 1978 to develop the technology necessary to reduce the use of HEU fuel by converting research reactors to low enriched uranium (LEU) fuel. The Reactor Conversion program is currently under the DOE's National Nuclear Security Administration's Global Threat Reduction Initiative (GTRI). 55 of the 129 reactors included in the scope have been already converted to LEU fuel or have shutdown prior to conversion. The major technical activities of the Conversion Program include: (1) the development of advanced LEU fuels; (2) conversion analysis and conversion support; and (3) technology development for the production of Molybdenum-99 (Mo 99 ) with LEU targets. The paper provides an overview of the status of the program, the technical challenges and accomplishments, and the role of international collaborations in the accomplishment of the Conversion Program objectives. Nuclear research and test reactors worldwide have been in operation for over 60 years. Many of these facilities operate with high enriched uranium fuel. In response to increased worries over the potential use of HEU from research reactors in the manufacturing of nuclear weapons, the U.S Department of Energy (DOE) initiated a program - the Reduced Enrichment for Research and Test Reactors (RERTR) - in 1978 to develop the technology necessary to reduce the use of HEU fuel in research reactors by converting them to low enriched uranium (LEU) fuel. The reactor conversion program was initially focused on U.S.-supplied reactors, but in the early 1990s it expanded and began to collaborate with Russian institutes with the objective of converting Russian supplied reactors to the use of LEU fuel.

  17. 76 FR 13662 - Hewlett Packard Company, Enterprise Business Division, Technical Services America, Global Parts...

    Science.gov (United States)

    2011-03-14

    ... Packard Company, Enterprise Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers From QFlex, North America Logistics, and UPS, Headquartered in Palo Alto, CA... Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers...

  18. 76 FR 10394 - Hewlett Packard Company, Enterprise Business Division, Technical Services America, Global Parts...

    Science.gov (United States)

    2011-02-24

    ... Packard Company, Enterprise Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers From Qflex, North America Logistics, and UPS, Headquartered in Palo Alto, CA... Business Division, Technical Services America, Global Parts Supply Chain Group, Including Leased Workers...

  19. An overview of artificial intelligence and robotics. Volume 1: Artificial intelligence. Part B: Applications

    Science.gov (United States)

    Gevarter, W. B.

    1983-01-01

    Artificial Intelligence (AI) is an emerging technology that has recently attracted considerable attention. Many applications are now under development. This report, Part B of a three part report on AI, presents overviews of the key application areas: Expert Systems, Computer Vision, Natural Language Processing, Speech Interfaces, and Problem Solving and Planning. The basic approaches to such systems, the state-of-the-art, existing systems and future trends and expectations are covered.

  20. Technical recommendations for bilateral comparison in diagnosis radiology: part 3

    International Nuclear Information System (INIS)

    Peixoto, J.G.P.; Almeida, C.E.V. de

    2015-01-01

    Uncertainty and results homogeneity need to following the technical procedure to bilateral comparison, then we select the equipment used, reference conditions and the data file to be used for all participant laboratory. The partial results will be presentation at metrology and medical physics congress. (author)

  1. Iterative reconstruction techniques for computed tomography Part 1: Technical principles

    International Nuclear Information System (INIS)

    Willemink, Martin J.; Jong, Pim A. de; Leiner, Tim; Nievelstein, Rutger A.J.; Schilham, Arnold M.R.; Heer, Linda M. de; Budde, Ricardo P.J.

    2013-01-01

    To explain the technical principles of and differences between commercially available iterative reconstruction (IR) algorithms for computed tomography (CT) in non-mathematical terms for radiologists and clinicians. Technical details of the different proprietary IR techniques were distilled from available scientific articles and manufacturers' white papers and were verified by the manufacturers. Clinical results were obtained from a literature search spanning January 2006 to January 2012, including only original research papers concerning IR for CT. IR for CT iteratively reduces noise and artefacts in either image space or raw data, or both. Reported dose reductions ranged from 23 % to 76 % compared to locally used default filtered back-projection (FBP) settings, with similar noise, artefacts, subjective, and objective image quality. IR has the potential to allow reducing the radiation dose while preserving image quality. Disadvantages of IR include blotchy image appearance and longer computational time. Future studies need to address differences between IR algorithms for clinical low-dose CT. circle Iterative reconstruction technology for CT is presented in non-mathematical terms. (orig.)

  2. An overview of economic and technical issues related to LWR MOX fuel usage

    International Nuclear Information System (INIS)

    Malone, J.P.; Varley, G.; Goldstein, L.

    1999-01-01

    This paper will present comparisons of the economics of MOX versus UO 2 fuels. In addition to the economics of the front end, the scope of the comparison will include the back end of the fuel cycle. Management of spent MOX fuel assemblies presents utilities with some technical issues that can complicate spent fuel pool operation. Alternative spent fuel management methods, such as dry storage of spent MOX fuel assemblies, will also be discussed. Differences in decay heat loads versus time for spent MOX and UO 2 fuel assemblies will be presented. This difference is one of the main problems confronting spent fuel managers relative to MOX. The difference in decay heat loads will serve as the basis for a performance overview of the various spent fuel technologies available today. The economics of the front end of MOX will be presented relative to UO 2 fuel. Availability of MOX manufacturing capability will also be discussed, along with a discussion of its impact on future MOX fabrication prices. The in-core performance of MOX will be compared to that of UO 2 fuel with similar performance characteristics. The information will include highlights of nuclear design and related operational considerations such as: Reactivity reduction with burnup is slower for MOX fuel than for UO 2 fuel; Spectral hardening resulting in lower control rod worths and a lower soluble boron worth; and more negative moderator, void and fuel temperature coefficients. A comparison of Westinghouse and ABB-CE core designs for use on disposition of weapons MOX in 12- and 18-month cycles will be presented. (author)

  3. Technical Reports: Langley Aerospace Research Summer Scholars. Part 1

    Science.gov (United States)

    Schwan, Rafaela (Compiler)

    1995-01-01

    The Langley Aerospace Research Summer Scholars (LARSS) Program was established by Dr. Samuel E. Massenberg in 1986. The program has increased from 20 participants in 1986 to 114 participants in 1995. The program is LaRC-unique and is administered by Hampton University. The program was established for the benefit of undergraduate juniors and seniors and first-year graduate students who are pursuing degrees in aeronautical engineering, mechanical engineering, electrical engineering, material science, computer science, atmospheric science, astrophysics, physics, and chemistry. Two primary elements of the LARSS Program are: (1) a research project to be completed by each participant under the supervision of a researcher who will assume the role of a mentor for the summer, and (2) technical lectures by prominent engineers and scientists. Additional elements of this program include tours of LARC wind tunnels, computational facilities, and laboratories. Library and computer facilities will be available for use by the participants.

  4. An overview of research designs relevant to nursing: Part 1: quantitative research designs

    OpenAIRE

    Sousa,Valmi D.; Driessnack,Martha; Mendes,Isabel Amélia Costa

    2007-01-01

    This three part series of articles provides a brief overview of relevant research designs in nursing. The first article in the series presents the most frequently used quantitative research designs. Strategies for non-experimental and experimental research designs used to generate and refine nursing knowledge are described. In addition, the importance of quantitative designs and the role they play in developing evidence-based practice are discussed. Nursing care needs to be determined by the ...

  5. Recreational technical diving part 1: an introduction to technical diving methods and activities.

    Science.gov (United States)

    Mitchell, Simon J; Doolette, David J

    2013-06-01

    Technical divers use gases other than air and advanced equipment configurations to conduct dives that are deeper and/or longer than typical recreational air dives. The use of oxygen-nitrogen (nitrox) mixes with oxygen fractions higher than air results in longer no-decompression limits for shallow diving, and faster decompression from deeper dives. For depths beyond the air-diving range, technical divers mix helium, a light non-narcotic gas, with nitrogen and oxygen to produce 'trimix'. These blends are tailored to the depth of intended use with a fraction of oxygen calculated to produce an inspired oxygen partial pressure unlikely to cause cerebral oxygen toxicity and a nitrogen fraction calculated to produce a tolerable degree of nitrogen narcosis. A typical deep technical dive will involve the use of trimix at the target depth with changes to gases containing more oxygen and less inert gas during the decompression. Open-circuit scuba may be used to carry and utilise such gases, but this is very wasteful of expensive helium. There is increasing use of closed-circuit 'rebreather' devices. These recycle expired gas and potentially limit gas consumption to a small amount of inert gas to maintain the volume of the breathing circuit during descent and the amount of oxygen metabolised by the diver. This paper reviews the basic approach to planning and execution of dives using these methods to better inform physicians of the physical demands and risks.

  6. Nordic study on reactor waste. Technical part 3

    International Nuclear Information System (INIS)

    1981-08-01

    The ground disposal alternatives examined in the Nordic study are based on establishment of relevant product specifications which can be adapted to the safety analysis of the entire waste handling sequence. Such product specifications would in turn influence the choice of incorporation techniques and may enable an optimization of the process. In order to interprete the small-scale laboratory tests with respect to long-term performance of full-scale products there were accomplished: - qualitative evaluations of the relevance of product properties for normal and abnormal events during storage, transport and disposal; - attempts to quantify the relevance of different properties, i.e. their influence on radiation doses from different stages of well specified waste management system; - assessments of available laboratory tests and of correlations between results from such tests and the long-term performance of full-scale technical products; - studies of reaction mechanisms and parameters that can affect the long-term performance of disposed products; - laboratory incorporation experiments to study impacts of process variables on the fixation of ion exchange wastes in cement and bitumen; - full-scale tests to study product performance under simulated accident conditions. (EG)

  7. Mount Elbert Gas Hydrate Stratigraphic Test Well, Alaska North Slope: Overview of scientific and technical program

    Science.gov (United States)

    Hunter, R.B.; Collett, T.S.; Boswell, R.; Anderson, B.J.; Digert, S.A.; Pospisil, G.; Baker, R.; Weeks, M.

    2011-01-01

    The Mount Elbert Gas Hydrate Stratigraphic Test Well was drilled within the Alaska North Slope (ANS) Milne Point Unit (MPU) from February 3 to 19, 2007. The well was conducted as part of a Cooperative Research Agreement (CRA) project co-sponsored since 2001 by BP Exploration (Alaska), Inc. (BPXA) and the U.S. Department of Energy (DOE) in collaboration with the U.S. Geological Survey (USGS) to help determine whether ANS gas hydrate can become a technically and commercially viable gas resource. Early in the effort, regional reservoir characterization and reservoir simulation modeling studies indicated that up to 0.34 trillion cubic meters (tcm; 12 trillion cubic feet, tcf) gas may be technically recoverable from 0.92 tcm (33 tcf) gas-in-place within the Eileen gas hydrate accumulation near industry infrastructure within ANS MPU, Prudhoe Bay Unit (PBU), and Kuparuk River Unit (KRU) areas. To further constrain these estimates and to enable the selection of a test site for further data acquisition, the USGS reprocessed and interpreted MPU 3D seismic data provided by BPXA to delineate 14 prospects containing significant highly-saturated gas hydrate-bearing sand reservoirs. The "Mount Elbert" site was selected to drill a stratigraphic test well to acquire a full suite of wireline log, core, and formation pressure test data. Drilling results and data interpretation confirmed pre-drill predictions and thus increased confidence in both the prospect interpretation methods and in the wider ANS gas hydrate resource estimates. The interpreted data from the Mount Elbert well provide insight into and reduce uncertainty of key gas hydrate-bearing reservoir properties, enable further refinement and validation of the numerical simulation of the production potential of both MPU and broader ANS gas hydrate resources, and help determine viability of potential field sites for future extended term production testing. Drilling and data acquisition operations demonstrated that gas hydrate

  8. Overview

    International Nuclear Information System (INIS)

    Budzanowski, A.

    2002-01-01

    Full text: Thanks to the hard work and creativity of our scientific and technical staff, year 2001 was concluded with many exciting and promising research results. Their highlights are: The Belle experiment, running at KEKB at the High Energy Accelerator Research Organization in Tsukuba (Japan), observed the time-dependent CP violation in a neutral B-meson system. The CP violation parameter sin(2φ 1 ) was measured to be 0.99 ± 0.14 ± 0.06. The work of the Cracow group concentrated mainly on the silicon vertex detector and on the analysis of the underlying physics. New results were obtained in the field of multiparticle production in heavy-ion collisions using the PHOBOS detector installed at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory. The pseudorapidity densities of charged particles in Au + Au collisions measured near midrapidity show an approximately logarithmic evolution over a broad range of collision energies. The measurements of antiparticle-to-particle ratios allow an estimate of the baryochemical potential, showing a closer but not yet complete approach to the baryon-free regime potential at RHIC energies. An excellent fit to the transverse momentum spectra of p; (anti)p; π + ; π - and K - ,K + up to 1.5 GeV/c within the thermal model was obtained at √s NN = 130 GeV, indicating the validity of the thermal model with expansion. Two large experiments, H1 and ZEUS, both with strong INP participation, continued their studies of e-p collisions at the HERA accelerator at DESY. For the project of the HERA collider upgrade, the Cracow ZEUS team built and installed most parts of the new luminosity detector, while the Cracow H1 group contributed to the design and development of the new software for data acquisition and on-line reconstruction. Preparations for future large experiments, ALICE, ATLAS and LHCB, at the p-p and A-A Large Hadron Collider at CERN, have continued, with strong human and financial involvement on our part

  9. Bladder cancer: overview and disease management. Part 1: non-muscle-invasive bladder cancer.

    Science.gov (United States)

    Anderson, Beverley

    2018-05-10

    Part 1 of this two-part article provides an overview of bladder cancer and discusses its management. Since publication of a previous article entitled 'Understanding the role of smoking in the aetiology of bladder cancer' ( Anderson, 2009 ), the author has received many requests for an update. This article provides an overview of bladder cancer and its current management practices, underlining the continued role of smoking as the predominant risk factor in the disease's development. The management of bladder cancer is governed by specific guidelines. Management of non-muscle-invasive cancers, including surgical intervention with transurethral resection, and intravesical therapy using chemotherapy and immunotherapy agents, is discussed. Cystectomy (removal of the bladder), is sometimes necessary. Treatments are effective in reducing tumour recurrence, but the effects of the risks and side-effects on the individual's quality of life can be significant. The prevalence of bladder cancer, and the nature of its management make this cancer one of the most expensive for the NHS to treat. The effectiveness of health promotional strategies in increasing peoples' awareness of their risk of developing the disease, and in enabling them to change long-term health behaviours is discussed. The role of the multidisciplinary team is explored, along with that of the uro-oncology cancer nurse specialist. Part 2 will consider the management of muscle-invasive and metastatic bladder cancer.

  10. Nuclear energy and public safety (Part II): a bibliography of technical resources

    International Nuclear Information System (INIS)

    Gabriel, M.R.

    1982-01-01

    Part 2 of the bibliography focuses on technical information of interest to those concerned with the operation of nuclear power plants and the subjects of safety and accidents. A subject index included after the bibliography provides a breakdown of the references into seven categories. There is also an author index. The material cited is available through the National Technical Information Service (NTIS) in Springfield, Virginia

  11. 75 FR 32435 - Office of Special Education and Rehabilitative Services; Overview Information; Technical...

    Science.gov (United States)

    2010-06-08

    ... DEPARTMENT OF EDUCATION Office of Special Education and Rehabilitative Services; Overview... for Special Education and Rehabilitative Services establishes a priority for grants to support States... to serve a single State, OA, or FAS. The Assistant Secretary for Special Education and Rehabilitative...

  12. Overview

    International Nuclear Information System (INIS)

    Stepp, J.C.

    1987-01-01

    A basic premise of seismic design practice is that structures and equipment designed for large, infrequent, design level earthquake motions will safely withstand the more frequent, smaller motions they may experience during their functional life. Moreover, based on experience data, there appears to be wide agreement among earthquake engineers that small-magnitude earthquakes (smaller than about M5.0) pose a negliable threat of damage to structures and equipment that have good seismic design and engineering. However, analytical approaches for engineering characterization of this lower-bound earthquake have not been developed. Largely this is because there has not, up to now, been a perceived need to do so. Moreover, because small earthquakes historically have not caused damage to well-engineered components, field investigations to determine their effects generally are not conducted. As a result, a robust earthquake experience data base, marking the earthquake magnitude corresponding to the onset of damage, has not been developed. The need to establish a lower-bound magnitude has now arisen in the context of probabilistic seismic hazard and risk assessments, where a limit on magnitude must be defined below which the contribution from smaller quakes is not considered. This workshop addresses the engineering characterization of small-magnitude earthquakes with a focus on developing technical bases for determining the lower-bound magnitude for probabilistic seismic hazard and risk computations at nuclear power generating plant sites, principally those located in the eastern U.S.. These facilities typically are designed for broad-band ground motion spectra which have spectral amplifications representative of large-magnitude earthquakes, and to conservative seismic design criteria

  13. Taxonomy of Means and Ends in Aquaculture Production—Part 2: The Technical Solutions of Controlling Solids, Dissolved Gasses and pH

    Directory of Open Access Journals (Sweden)

    Bjorgvin Vilbergsson

    2016-09-01

    Full Text Available In engineering design, knowing the relationship between the means (technique and the end (desired function or outcome is essential. The means in Aquaculture are technical solutions like airlifts that are used to achive desired functionality (an end like controlling dissolved gasses. In previous work, the authors identified possible functions by viewing aquaculture production systems as transformation processes in which inputs are transformed by treatment techniques (means and produce outputs (ends. The current work creates an overview of technical solutions of treatment functions for both design and research purposes. A comprehensive literature review of all areas of technical solutions is identified and categorized into a visual taxonomy of the treatment functions for controlling solids, controlling dissolved gasses and controlling pH alkalinity and hardness. This article is the second in a sequence of four and partly presents the treatments functions in the taxonomy. The other articles in this series present complementary aspects of this research: Part 1, A transformational view on aquaculture and functions divided into input, treatment and output functions; Part 2, The current taxonomy paper; Part 3, The second part of the taxonomy; and Part 4, Mapping of the means (techniques for multiple treatment functions.

  14. Investigation of parts and elements of technical reports in nuclear field in Japan

    International Nuclear Information System (INIS)

    Naramoto, Miyoko; Narui, Shigeko

    1985-01-01

    Presentation of parts and elements necessary for editing and publishing reports in accordance with SIST-09-1984 (Presentation of Scientific and Technical Reports) was investigated for 65 codes of technical reports in the nuclear field in Japan. English presentation of important elements was also investigated additionally. The investigation shows high presentation fractions (80 -- 100 %) for main bibliographic elements, and medium (66 %) and extremely low (3 %) for abntract and key word, respectively. (The bibliographic elements are described in various parts such as front cover, title page and front matter) and (the subject elements appear mainly in front matter). The title, author's name in Roman character, affiliation, publisher and abstract are described in English with fractions of 80 %, 66 %, 68 % and 62 %, respectively. It is hoped for more publishers and editors of technical reports to accept the standard SIST-09 for efficient processing of secondary information. (author)

  15. Update on impact effects in nuclear plants Part I--overview and need for integrated approach

    International Nuclear Information System (INIS)

    Sliter, G.E.; Ravindra, M.K.

    1984-01-01

    In this paper, an ASCE working group on impact effects in nuclear plants updates the review of this technology contained in a five-yearold ASCE report. In Part I, an overview is given of the impact conditions addressed in nuclear plant design against missiles generated by such postulated extreme events as tornados, turbine failures, pipe ruptures, aircraft crashes, and drops of heavy objects from lifting devices. The conclusion of a brief evaluation of the state of the art in predicting structural response for the various missile impact types is that two of them--pipe whip and heavy object drop--would benefit most by further development of design and analysis methods. Parts II and III of this paper review current practice and identify its limitations for these two impact types. Part I continues with a discussion of the general characteristics of impacts and the structural response they produce and concludes with a recommendation for and brief description of an ''integrated approach'' for treating impact effects. The adoption of this systematic approach in future development of impact technology would guide engineers in the use of the most appropriate and accurate available techniques for designing against a particular impact event

  16. An overview of technical requirements on durable concrete production for near surface disposal facilities for radioactive wastes

    International Nuclear Information System (INIS)

    Tolentino, Evandro; Tello, Cledola Cassia Oliveira de

    2013-01-01

    Radioactive waste can be generated by a wide range of activities varying from activities in hospitals to nuclear power plants, to mines and mineral processing facilities. General public have devoted nowadays considerable attention to the subject of radioactive waste management due to heightened awareness of environmental protection. The preferred strategy for the management of all radioactive waste is to contain it and to isolate it from the accessible biosphere. The Federal Government of Brazil has announced the construction for the year of 2014 and operation for the year of 2016 of a near surface disposal facility for low and intermediate level radioactive waste. The objective of this paper is to provide an overview of technical requirements related to production of durable concrete to be used in near surface disposal facilities for radioactive waste concrete structures. These requirements have been considered by researchers dealing with ongoing designing effort of the Brazilian near surface disposal facility. (author)

  17. Overview on seismic evaluation and retrofitting within JICA Technical Cooperation Project on reduction of seismic risk in Romania

    International Nuclear Information System (INIS)

    Seki, M.; Vacareanu, R.; Pavel, M.; Lozinca, E.; Cotofana, D.; Chesca, B.; Georgescu, B.; Kaminosono, T.

    2007-01-01

    The objective of this paper is to give an overview on the seismic evaluation and retrofitting procedures of reinforced concrete buildings within JICA technical cooperation project in Romania. The content of the paper covers a) an outline of the seismic evaluation; history and comparison of Romanian seismic design codes with the Japanese seismic evaluation guidelines, b) an outline of the retrofitting techniques which were transferred from Japan to Romania and structural tests for retrofitting techniques employed in Romania and c) retrofitting details that were used by JICA/NCSRR in the retrofitting design of two vulnerable buildings in Bucharest. The above-mentioned retrofitting projects are now under development of detailed design and therefore, in the near future, refining and improvement of solutions will be performed. (authors)

  18. Fabricating CAD/CAM Implant-Retained Mandibular Bar Overdentures: A Clinical and Technical Overview

    Directory of Open Access Journals (Sweden)

    Chui Ling Goo

    2017-01-01

    Full Text Available This report describes the clinical and technical aspects in the oral rehabilitation of an edentulous patient with knife-edge ridge at the mandibular anterior edentulous region, using implant-retained overdentures. The application of computer-aided design and computer-aided manufacturing (CAD/CAM in the fabrication of the overdenture framework simplifies the laboratory process of the implant prostheses. The Nobel Procera CAD/CAM System was utilised to produce a lightweight titanium overdenture bar with locator attachments. It is proposed that the digital workflow of CAD/CAM milled implant overdenture bar allows us to avoid numerous technical steps and possibility of casting errors involved in the conventional casting of such bars.

  19. Overview of technical barriers and implementation of cellulosic ethanol in the U.S

    International Nuclear Information System (INIS)

    Kim, Tae Hoon; Kim, Tae Hyun

    2014-01-01

    There is mounting concern about the buildup of carbon dioxide (CO 2 ) and other so-called greenhouse gases in the atmosphere. In general, bioethanol production requires minimal fossil fuel input in the conversion step, and ethanol is considered a promising alternative fuel to petroleum-derived products. It is anticipated that ethanol production with second-generation biomass, i.e. lignocellulosic materials, will be possible on a large scale in the near future. Latest efforts have been focused on overcoming technical challenges in bioconversion, particularly pretreatment, and finding the solutions required to implement biorefinery on a large scale. This paper introduces and reviews the current status of research, and of the ethanol industry in the U.S. In addition, other important concepts in biofuels, cellulosic ethanol, and biorefinery in general are reviewed, and the key technical issues in bioconversion of cellulosic ethanol, such as pretreatment and factors affecting bioconversion of biomass are also discussed. - Highlights: • The current status of research, and of the ethanol industry in the U.S. • Important concepts in biofuels, cellulosic ethanol, and biorefinery. • The key technical issues in bioconversion of cellulosic ethanol. • Pretreatment and factors affecting bioconversion of biomass

  20. No Fault Found events in maintenance engineering Part 2: Root causes, technical developments and future research

    International Nuclear Information System (INIS)

    Khan, Samir; Phillips, Paul; Hockley, Chris; Jennions, Ian

    2014-01-01

    This is the second half of a two paper series covering aspects of the no fault found (NFF) phenomenon, which is highly challenging and is becoming even more important due to increasing complexity and criticality of technical systems. Part 1 introduced the fundamental concept of unknown failures from an organizational, behavioral and cultural stand point. It also reported an industrial outlook to the problem, recent procedural standards, whilst discussing the financial implications and safety concerns. In this issue, the authors examine the technical aspects, reviewing the common causes of NFF failures in electronic, software and mechanical systems. This is followed by a survey on technological techniques actively being used to reduce the consequence of such instances. After discussing improvements in testability, the article identifies gaps in literature and points out the core areas that should be focused in the future. Special attention is paid to the recent trends on knowledge sharing and troubleshooting tools; with potential research on technical diagnosis being enumerated

  1. Technical know-how for modeling of geological environment. (1) Overview and groundwater flow modeling

    International Nuclear Information System (INIS)

    Saegusa, Hiromitsu; Takeuchi, Shinji; Maekawa, Keisuke; Osawa, Hideaki; Semba, Takeshi

    2011-01-01

    It is important for site characterization projects to manage the decision-making process with transparency and traceability and to transfer the technical know-how accumulated during the research and development to the implementing phase and to future generations. The modeling for a geological environment is to be used to synthesize investigation results. Evaluation of the impact of uncertainties in the model is important to identify and prioritize key issues for further investigations. Therefore, a plan for site characterization should be made based on the results of the modeling. The aim of this study is to support for the planning of initial surface-based site characterization based on the technical know-how accumulated from the Mizunami Underground Research Laboratory Project and the Horonobe Underground Research Laboratory Project. These projects are broad scientific studies of the deep geological environment that are a basis for research and development for the geological disposal of high-level radioactive wastes. In this study, the work-flow of the groundwater flow modeling, which is one of the geological environment models, and is to be used for setting the area for the geological environment modeling and for groundwater flow characterization, and the related decision-making process using literature data have been summarized. (author)

  2. Japanese contributions to IAEA INTOR workshop, phase two A, part 2 chapter VII: technical benefit

    International Nuclear Information System (INIS)

    Itoh, Shin-ichi; Iida, Hiromasa; Tomabechi, Ken; Tone, Tatsuzo; Fujisawa, Noboru.

    1985-07-01

    This report corresponds to Chapter VII of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 2. The purpose of technical benefit study is to examine the implications of having different manufacturers fabricate components of a major system of INTOR. A systematic examinations of advantages and disadvantages of designing and fabricating major INTOR components in the frame of one international joint projects is performed. (author)

  3. Simulation in paediatric urology and surgery. Part 1: An overview of educational theory.

    Science.gov (United States)

    Nataraja, Ramesh M; Webb, Nathalie; Lopez, Pedro-Jose

    2018-03-01

    Surgical training has changed radically in the last few decades. The traditional Halstedian model of time-bound apprenticeship has been replaced with competency-based training. Advanced understanding of mastery learning principles has vastly altered educational methodology in surgical training, in terms of instructional design, delivery of educational content, assessment of learning, and programmatic evaluation. As part of this educational revolution, fundamentals of simulation-based education have been adopted into all levels and aspects of surgical training, requiring an understanding of concepts of fidelity and realism and the impact they have on learning. There are many educational principles and theories that can help clinical teachers understand the way that their trainees learn. In the acquisition of surgical expertise, concepts of mastery learning, deliberate practice, and experiential learning are particularly important. Furthermore, surgical teachers need to understand the principles of effective feedback, which is essential to all forms of skills learning. This article, the first of two papers, presents an overview of relevant learning theory for the busy paediatric surgeon and urologist. Seeking to introduce the concepts underpinning current changes in surgical education and training, providing practical tips to optimise teaching endeavours. Copyright © 2018 Journal of Pediatric Urology Company. Published by Elsevier Ltd. All rights reserved.

  4. Computational Modeling and Simulation of Attitude Change. Part 1, Connectionist Models and Simulations of Cognitive Dissonance: an Overview

    OpenAIRE

    Voinea, Camelia Florela

    2013-01-01

    Cognitive Dissonance Theory is considered part of the cognitive consistency theories in Social Psychology. They uncover a class of conceptual models which describe the attitude change as a cognitive consistency-seeking issue. As these conceptual models requested more complex operational expression, algebraic, mathematical and, lately, computational modeling approaches of cognitive consistency have been developed. Part 1 of this work provides an overview of the connectionist modeling of cognit...

  5. Imaging windows for long-term intravital imaging: General overview and technical insights.

    Science.gov (United States)

    Alieva, Maria; Ritsma, Laila; Giedt, Randy J; Weissleder, Ralph; van Rheenen, Jacco

    2014-01-01

    Intravital microscopy is increasingly used to visualize and quantitate dynamic biological processes at the (sub)cellular level in live animals. By visualizing tissues through imaging windows, individual cells (e.g., cancer, host, or stem cells) can be tracked and studied over a time-span of days to months. Several imaging windows have been developed to access tissues including the brain, superficial fascia, mammary glands, liver, kidney, pancreas, and small intestine among others. Here, we review the development of imaging windows and compare the most commonly used long-term imaging windows for cancer biology: the cranial imaging window, the dorsal skin fold chamber, the mammary imaging window, and the abdominal imaging window. Moreover, we provide technical details, considerations, and trouble-shooting tips on the surgical procedures and microscopy setups for each imaging window and explain different strategies to assure imaging of the same area over multiple imaging sessions. This review aims to be a useful resource for establishing the long-term intravital imaging procedure.

  6. Commercial Building Energy Asset Score System: Program Overview and Technical Protocol (Version 1.0)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na; Gorrissen, Willy J.

    2013-01-11

    The U.S. Department of Energy (DOE) is developing a national voluntary energy asset score system that includes an energy asset score tool to help building owners evaluate their buildings with respect to the score system. The goal of the energy asset score system is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system will allow building owners and managers to compare their building infrastructure against peers and track building upgrade progress over time. The system can also help other building stakeholders (e.g., building operators, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from their operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset score tool. This report also describes alternative methods that were considered prior to developing the current approach. Finally, this report describes a few features of the program where alternative approaches are still under evaluation.

  7. Overview of States' Use of Telehealth for the Delivery of Early Intervention (IDEA Part C Services

    Directory of Open Access Journals (Sweden)

    Jana Cason

    2012-12-01

    Full Text Available Background: Early intervention (EI services are designed to promote the development of skills and enhance the quality of life of infants and toddlers who have been identified as having a disability or developmental delay, enhance capacity of families to care for their child with special needs, reduce future educational costs, and promote independent living (NECTAC 2011.  EI services are regulated by Part C of the Individuals with Disabilities Education Improvement Act (IDEA; however, personnel shortages, particularly in rural areas, limit access for children who qualify.  Telehealth is an emerging delivery model demonstrating potential to deliver EI services effectively and efficiently, thereby improving access and ameliorating the impact of provider shortages in underserved areas. The use of a telehealth delivery model facilitates inter-disciplinary collaboration, coordinated care, and consultation with specialists not available within a local community.  Method:  A survey sent by the National Early Childhood Technical Assistance Center (NECTAC to IDEA Part C coordinators assessed their utilization of telehealth within states’ IDEA Part C programs.  Reimbursement for provider type and services and barriers to implement a telehealth service delivery model were identified.  Results:  Representatives from 26 states and one jurisdiction responded to the NECTAC telehealth survey.  Of these, 30% (n=9 indicated that they are either currently using telehealth as an adjunct service delivery model (n=6 or plan to incorporate telehealth within the next 1-2 years (n=3.  Identified telehealth providers included developmental specialists, teachers of the Deaf/Hard of Hearing (DHH, speech-language pathologists, occupational therapists, physical therapists, behavior specialists, audiologists, and interpreters.  Reimbursement was variable and included use of IDEA Part C funding, Medicaid, and private insurance.  Expressed barriers and concerns for

  8. 10 CFR Appendix III to Part 960 - Application of the System and Technical Guidelines During the Siting Process

    Science.gov (United States)

    2010-01-01

    ... 960—Application of the System and Technical Guidelines During the Siting Process 1. This appendix... 10 Energy 4 2010-01-01 2010-01-01 false Application of the System and Technical Guidelines During the Siting Process III Appendix III to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE...

  9. Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Part 1, Overview of NUCLARR data retrieval: User's guide

    International Nuclear Information System (INIS)

    Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

    1988-06-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This document, Part 1: Overview of NUCLARR Data Retrieval provides an introductory overview to the system's capabilities and procedures for data retrieval. The methods and criteria for selection of data sources and entering them into the NUCLARR system are also described in this document

  10. Sexual Desire and Hypoactive Sexual Desire Disorder in Women. Introduction and Overview. Standard Operating Procedure (SOP Part 1)

    DEFF Research Database (Denmark)

    Bitzer, Johannes; Giraldi, Annamaria; Pfaus, Jim

    2013-01-01

    Introduction.  Hypoactive sexual desire disorder (HSDD) is defined in Diagnostic and Statistical Manual of Mental Disorders Fourth Edition as persistent or recurrent deficiency (or absence) of sexual fantasies/thoughts, and/or desire for or receptivity to sexual activity, which causes personal...... must be based on a biopsychosocial, multidimensional, and integrative perspective. Bitzer J, Giraldi A, and Pfaus J. Sexual desire and hypoactive sexual desire disorder in women. Introduction and overview. Standard operating procedure (SOP part 1). J Sex Med **;**:**-**....

  11. FOREX trading strategy formation using technical analysis

    OpenAIRE

    Klimavičius, Domas

    2010-01-01

    FOREX technical analysis indicators, their characteristics and capabilities are researched in this final master thesis. The main goal of this thesis is to determine if technical analysis indicators can recognise patterns in price movements and if they can predict future price movement. The first part of the thesis presents with FOREX theoretical aspects, its characteristics and participants. In the second part of the thesis FOREX analysis tools are overviewed, focusing on technical analysis. ...

  12. World Solar Challenge 1993 Technical Report. Part 1. Darwin to Adelaide. (November 7-November 16, 1993)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-01-01

    This is a report of the above-named solar car race from Darwin to Adelaide, Australia. On January 7, 1983, an Australian adventurer Mr. Hans Tholstrup succeeded in running from the Australian west coast to Sydney in a car driven solely by solar energy. The travel took 20 days, at an average speed of 23km per hour. The technology has made remarkable advances since his success and, in the World Solar Challenge 1993 held in November 1993, a Honda team crossed the Australian Continent at an average speed of 85km per hour. Technical challenges included the development of maximum-output solar cell panels, a car designed to make full use of such power, and a run at the maximum possible speed, all these dependent solely on the sun as energy source. This report Part I contains the details of the race, analysis, aerodynamics, car body structure, manufacture, materials, and so forth. (NEDO)

  13. Simulation in paediatric urology and surgery, part 2: An overview of simulation modalities and their applications.

    Science.gov (United States)

    Nataraja, R M; Webb, N; Lopez, P J

    2018-02-02

    Surgical training has changed radically in the last few decades. The traditional Halstedian model of time-bound apprenticeship has been replaced with competency-based training. In our previous article, we presented an overview of learning theory relevant to clinical teaching; a summary for the busy paediatric surgeon and urologist. We introduced the concepts underpinning current changes in surgical education and training. In this next article, we give an overview of the various modalities of surgical simulation, the educational principles that underlie them, and potential applications in clinical practice. These modalities include; open surgical models and trainers, laparoscopic bench trainers, virtual reality trainers, simulated patients and role-play, hybrid simulation, scenario-based simulation, distributed simulation, virtual reality, and online simulation. Specific examples of technology that may be used for these modalities are included but this is not a comprehensive review of all available products. Copyright © 2018 Journal of Pediatric Urology Company. Published by Elsevier Ltd. All rights reserved.

  14. Mineral deposits research in Uruguay. Technical economic part; Investigacion de yacimientos de minerales en el Uruguay. Parte tecnico economica.

    Energy Technology Data Exchange (ETDEWEB)

    Raabe, W

    1959-07-01

    Technical researches, mineralogical and chemical analysis were carried out in Zapucay and Iman deposit located in Uruguay south America, as a result of that, researchers was described the mineral adherences of the deposits.

  15. A four-part working bibliography of neuroethics: part 1: overview and reviews – defining and describing the field and its practices

    Science.gov (United States)

    2014-01-01

    Background Neuroethics entails investigations of neurocognitive mechanisms of morality and ethics; and studies and address of the ethical issues spawned by the use of neuroscience and its technologies to investigate cognition, emotion and actions. These two principal emphases, or what have been called “traditions” of neuroethics both mirror traditional bioethical discussions (such as debates about the safety of technological and pharmaceutical advances and ethical implications of new scientific and technological discoveries), and engage discourse about neuroscientific investigations of (proto-moral and moral) cognition, emotions and behaviors, and what such findings may mean for human beliefs and conduct - from the individual to the political levels. Given the growth, range, and rapid maturation of the field of neuroethics we provide an iterative, four-part document that affords a repository of international papers, books, and chapters that address the field in overview, and present discussion(s) of more particular aspects and topics of neuroethics. This first installment lists reviews and overviews of the discipline, and broad summaries of basic developments and issues of the field. Methods To systematically survey the neuroethics literature, searches were performed by accessing 11 databases, 8 additional literature depositories, and 4 individual journal searches using indexing language for National Library of Medicine (NLM) Medical Subject Heading databases. Searches and assurance against overlapping coverage were conducted using the RefWorks citation management program. Results Overview, review and reflections upon the history and multicultural perspectives of neuroethics were obtained and relevant listings from international journals, books, and book chapters are provided. Part I will be followed by three installments that will address a): the neuroscience of morality and ethics, including discussions of free will, and personal autonomy; b)

  16. A four-part working bibliography of neuroethics: part 1: overview and reviews--defining and describing the field and its practices.

    Science.gov (United States)

    Buniak, Liana; Darragh, Martina; Giordano, James

    2014-05-16

    Neuroethics entails investigations of neurocognitive mechanisms of morality and ethics; and studies and address of the ethical issues spawned by the use of neuroscience and its technologies to investigate cognition, emotion and actions. These two principal emphases, or what have been called "traditions" of neuroethics both mirror traditional bioethical discussions (such as debates about the safety of technological and pharmaceutical advances and ethical implications of new scientific and technological discoveries), and engage discourse about neuroscientific investigations of (proto-moral and moral) cognition, emotions and behaviors, and what such findings may mean for human beliefs and conduct - from the individual to the political levels.Given the growth, range, and rapid maturation of the field of neuroethics we provide an iterative, four-part document that affords a repository of international papers, books, and chapters that address the field in overview, and present discussion(s) of more particular aspects and topics of neuroethics. This first installment lists reviews and overviews of the discipline, and broad summaries of basic developments and issues of the field. To systematically survey the neuroethics literature, searches were performed by accessing 11 databases, 8 additional literature depositories, and 4 individual journal searches using indexing language for National Library of Medicine (NLM) Medical Subject Heading databases. Searches and assurance against overlapping coverage were conducted using the RefWorks citation management program. Overview, review and reflections upon the history and multicultural perspectives of neuroethics were obtained and relevant listings from international journals, books, and book chapters are provided. Part I will be followed by three installments that will address a): the neuroscience of morality and ethics, including discussions of free will, and personal autonomy; b) "second tradition neuroethics", to include

  17. In vitro acute and developmental neurotoxicity screening: an overview of cellular platforms and high-throughput technical possibilities.

    Science.gov (United States)

    Schmidt, Béla Z; Lehmann, Martin; Gutbier, Simon; Nembo, Erastus; Noel, Sabrina; Smirnova, Lena; Forsby, Anna; Hescheler, Jürgen; Avci, Hasan X; Hartung, Thomas; Leist, Marcel; Kobolák, Julianna; Dinnyés, András

    2017-01-01

    Neurotoxicity and developmental neurotoxicity are important issues of chemical hazard assessment. Since the interpretation of animal data and their extrapolation to man is challenging, and the amount of substances with information gaps exceeds present animal testing capacities, there is a big demand for in vitro tests to provide initial information and to prioritize for further evaluation. During the last decade, many in vitro tests emerged. These are based on animal cells, human tumour cell lines, primary cells, immortalized cell lines, embryonic stem cells, or induced pluripotent stem cells. They differ in their read-outs and range from simple viability assays to complex functional endpoints such as neural crest cell migration. Monitoring of toxicological effects on differentiation often requires multiomics approaches, while the acute disturbance of neuronal functions may be analysed by assessing electrophysiological features. Extrapolation from in vitro data to humans requires a deep understanding of the test system biology, of the endpoints used, and of the applicability domains of the tests. Moreover, it is important that these be combined in the right way to assess toxicity. Therefore, knowledge on the advantages and disadvantages of all cellular platforms, endpoints, and analytical methods is essential when establishing in vitro test systems for different aspects of neurotoxicity. The elements of a test, and their evaluation, are discussed here in the context of comprehensive prediction of potential hazardous effects of a compound. We summarize the main cellular characteristics underlying neurotoxicity, present an overview of cellular platforms and read-out combinations assessing distinct parts of acute and developmental neurotoxicology, and highlight especially the use of stem cell-based test systems to close gaps in the available battery of tests.

  18. The NASA Electronic Parts and Packaging (NEPP) Program: Overview and the New Tenets for Cost Conscious Mission Assurance on Electrical, Electronic, and Electromechanical (EEE) Parts

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2015-01-01

    The NEPP Program focuses on the reliability aspects of electronic devices (integrated circuits such as a processor in a computer). There are three principal aspects of this reliability: 1) Lifetime, inherent failure and design issues related to the EEE parts technology and packaging; 2) Effects of space radiation and the space environment on these technologies, and; 3) Creation and maintenance of the assurance support infrastructure required for mission success. The NEPP mission is to provide guidance to NASA for the selection and application of microelectronics technologies, to improve understanding of the risks related to the use of these technologies in the space environment, and to ensure that appropriate EEE parts research is performed to meet NASA mission assurance needs. NEPPs FY15 goals are to represent the NASA voice to the greater aerospace EEE parts community including supporting anti-counterfeit and trust, provide relevant guidance to cost-effective missions, aid insertion of advanced (and commercial) technologies, resolve unexpected parts issues, ensure access to appropriate radiation test facilities, and collaborate as widely as possible with external entities. In accordance with the changing mission profiles throughout NASA, the NEPP Program has developed a balanced portfolio of efforts to provide agency-wide assurance for not only traditional spacecraft developments, but also those in-line with the new philosophies emerging worldwide. In this presentation, we shall present an overview of this program and considerations for EEE parts assurance as applied to cost conscious missions.

  19. Focused issue on antiferromagnetic spintronics: An overview (Part of a collection of reviews on antiferromagnetic spintronics)

    KAUST Repository

    Jungwirth, T.

    2017-05-30

    This focused issue attempts to provide a comprehensive introduction into the field of antiferromagnetic spintronics. Apart from the brief overview below, it features five review articles. The intention is to cover in a coherent and complementary way key physical aspects of the antiferromagnetic spintronics research. These range from microelectronic memory devices and optical manipulation and detection of antiferromagnetic spins, to the fundamentals of antiferromagnetic dynamics in uniform or spin-textured systems, and to the interplay of antiferromagnetic spintronics with topological phenomena. The antiferromagnetic ordering can take a number of forms including fully compensated collinear, non-collinear, and non-coplanar magnetic lattices, compensated and uncompensated ferrimagnets, or metamagnetic materials hosting an antiferromagnetic to ferromagnetic phase transition. Apart from the variety of distinct magnetic crystal structures, the focused issue also encompasses spintronic phenomena and devices studied in antiferromagnet/ferromagnet heterostructures and in synthetic antiferromagnets.

  20. Focused issue on antiferromagnetic spintronics: An overview (Part of a collection of reviews on antiferromagnetic spintronics)

    KAUST Repository

    Jungwirth, T.; Sinova, J.; Manchon, Aurelien; Marti, X.; Wunderlich, J.; Felser, C.

    2017-01-01

    This focused issue attempts to provide a comprehensive introduction into the field of antiferromagnetic spintronics. Apart from the brief overview below, it features five review articles. The intention is to cover in a coherent and complementary way key physical aspects of the antiferromagnetic spintronics research. These range from microelectronic memory devices and optical manipulation and detection of antiferromagnetic spins, to the fundamentals of antiferromagnetic dynamics in uniform or spin-textured systems, and to the interplay of antiferromagnetic spintronics with topological phenomena. The antiferromagnetic ordering can take a number of forms including fully compensated collinear, non-collinear, and non-coplanar magnetic lattices, compensated and uncompensated ferrimagnets, or metamagnetic materials hosting an antiferromagnetic to ferromagnetic phase transition. Apart from the variety of distinct magnetic crystal structures, the focused issue also encompasses spintronic phenomena and devices studied in antiferromagnet/ferromagnet heterostructures and in synthetic antiferromagnets.

  1. Technical recommendations for bilateral comparison in diagnosis radiology: part 3; Protocolo tecnico da comparacao bilateral em radiologia diagnostica: parte 3

    Energy Technology Data Exchange (ETDEWEB)

    Peixoto, J.G.P., E-mail: guilherm@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Almeida, C.E.V. de [Universidade do Estado do Rio de Janeiro (LCR/IBRAG/UERJ), Rio de Janeiro, RJ (Brazil). Lab. de Ciencias Radiologicas

    2015-07-01

    Uncertainty and results homogeneity need to following the technical procedure to bilateral comparison, then we select the equipment used, reference conditions and the data file to be used for all participant laboratory. The partial results will be presentation at metrology and medical physics congress. (author)

  2. An Overview of Kierkegaard’s Nachlass: Part One, The Materials

    DEFF Research Database (Denmark)

    Stewart, Jon Bartley

    2015-01-01

    Kierkegaard’s journals, notebooks and loose papers represent a generally neglected part of his vast corpus of writings. The present two-part article tells the story of this material from the time of Kierkegaard’s death until the creation of the new Danish edition, Søren Kierkegaards Skrifter....... This first part explains the general nature of the surviving material. An account is further given of the long road that Kierkegaard’s Nachlass took from its discovery upon his death in 1855 to its current home at the Royal Library in Copenhagen. The goal is to provide little-known factual information about...

  3. Overview of the revised 10 CFR Part 20, standards for protection against radiation

    International Nuclear Information System (INIS)

    Peterson, H.T.; Cool, D.A.; Buchanan, J.D.; Cool, W.S.

    1991-01-01

    The revised 10 CFR Part 20 is based upon the 1977 recommendations of the International Commission of Radiological Protection and is generally consistent with the 1987 recommendations of the National Council on Radiation Protection and Measurements. The revised Part 20 contains significant changes from past practice and procedures for estimating, measuring, combining, recording and reporting doses. These changes are associated with the introduction of new concepts and methods of assessing doses

  4. Overview of technical Issues Associated with the Long Term Storage of Light Water Reactor used Nuclear Fuel

    International Nuclear Information System (INIS)

    Sorenson, Ken B.

    2014-01-01

    The nuclear power technical community is developing the technical basis for demonstrating the safety of storing used nuclear fuel for extended periods of time. The combination of reactor operations that off-load spent fuel to interim storage, coupled with delays in repository construction, has resulted in the expectation that storage periods may be for longer periods of time than originally intended. As more fuel continues to be off-loaded from operating reactors, the need for expanded interim storage also increases. As repository programs are delayed, interim storage requirements will likely exceed licensing term limits. To address these operational realities, there has been a concerted international effort to identify and prioritize the technical issues that need to be addressed in order to demonstrate the safety of storing used nuclear fuel for extended periods of time. Since this is an international effort, different storage systems, regulations, and policies need to be considered. This results in differences in technical issues, as well as differences in priorities. However, this effort also identifies important commonalities in some technical areas that need to be addressed. A broad-based international evaluation of these technical issues provides a better understanding of technical concerns as they relate to individual storage systems and specific national regulatory frameworks. While there are several international activities underway that are focused on long term storage, this paper will discuss the activities of the Electric Power Research Institute (EPRI)/Extended Storage Collaboration Program (ESCP) International Subcommittee. A status report detailing the identification and prioritization of the technical issues was presented at the PSAM11 Conference in June 2012 (1). Since that conference, a final report has been completed by the EPRI/ESCP International Subcommittee (2). This paper will provide important results of the final report as well as

  5. Moving the Needle: The Effect of Faculty Development on Part-Time Teachers at a Technical College

    Science.gov (United States)

    Proeber, Helen R.

    2012-01-01

    In the business division of the technical college in which this study occurred, there was a need to change the way part-time faculty prepared course syllabi. The implementation of a professional development workshop that focused on the components and necessity of the syllabus provided the teachers new information they needed to be prepared for the…

  6. Current Concepts in the Mandibular Condyle Fracture Management Part I: Overview of Condylar Fracture

    Science.gov (United States)

    Yang, Jung-Dug; Chung, Ho-Yun; Cho, Byung-Chae

    2012-01-01

    The incidence of condylar fractures is high, but the management of fractures of the mandibular condyle continues to be controversial. Historically, maxillomandibular fixation, external fixation, and surgical splints with internal fixation systems were the techniques commonly used in the treatment of the fractured mandible. Condylar fractures can be extracapsular or intracapsular, undisplaced, deviated, displaced, or dislocated. Treatment depends on the age of the patient, the co-existence of other mandibular or maxillary fractures, whether the condylar fracture is unilateral or bilateral, the level and displacement of the fracture, the state of dentition and dental occlusion, and the surgeonnds on the age of the patient, the co-existence of othefrom which it is difficult to recover aesthetically and functionally;an appropriate treatment is required to reconstruct the shape and achieve the function ofthe uninjured status. To do this, accurate diagnosis, appropriate reduction and rigid fixation, and complication prevention are required. In particular, as mandibular condyle fracture may cause long-term complications such as malocclusion, particularly open bite, reduced posterior facial height, and facial asymmetry in addition to chronic pain and mobility limitation, great caution should be taken. Accordingly, the authors review a general overview of condyle fracture. PMID:22872830

  7. Current Concepts in the Mandibular Condyle Fracture Management Part I: Overview of Condylar Fracture

    Directory of Open Access Journals (Sweden)

    Kang-Young Choi

    2012-07-01

    Full Text Available The incidence of condylar fractures is high, but the management of fractures of the mandibular condyle continues to be controversial. Historically, maxillomandibular fixation, external fixation, and surgical splints with internal fixation systems were the techniques commonly used in the treatment of the fractured mandible. Condylar fractures can be extracapsular or intracapsular, undisplaced, deviated, displaced, or dislocated. Treatment depends on the age of the patient, the co-existence of other mandibular or maxillary fractures, whether the condylar fracture is unilateral or bilateral, the level and displacement of the fracture, the state of dentition and dental occlusion, and the surgeonnds on the age of the patient, the co-existence of othefrom which it is difficult to recover aesthetically and functionally;an appropriate treatment is required to reconstruct the shape and achieve the function ofthe uninjured status. To do this, accurate diagnosis, appropriate reduction and rigid fixation, and complication prevention are required. In particular, as mandibular condyle fracture may cause long-term complications such as malocclusion, particularly open bite, reduced posterior facial height, and facial asymmetry in addition to chronic pain and mobility limitation, great caution should be taken. Accordingly, the authors review a general overview of condyle fracture.

  8. Current Concepts in the Mandibular Condyle Fracture Management Part I: Overview of Condylar Fracture

    Directory of Open Access Journals (Sweden)

    Kang-Young Choi

    2012-07-01

    Full Text Available The incidence of condylar fractures is high,but the management of fractures of the mandibularcondyle continues to be controversial. Historically, maxillomandibular fixation, externalfixation, and surgical splints with internal fixation systems were the techniques commonlyused in the treatment of the fractured mandible. Condylar fractures can be extracapsularor intracapsular, undisplaced, deviated, displaced, or dislocated. Treatment depends on theage of the patient, the co-existence of other mandibular or maxillary fractures, whether thecondylar fracture is unilateral or bilateral, the level and displacement of the fracture, thestate of dentition and dental occlusion, and the surgeonnds on the age of the patient, theco-existence of othefrom which it is difficult to recover aesthetically and functionally;anappropriate treatment is required to reconstruct the shape and achieve the function oftheuninjured status. To do this, accurate diagnosis, appropriate reduction and rigid fixation, andcomplication prevention are required. In particular, as mandibular condyle fracture may causelong-term complications such as malocclusion, particularly open bite, reduced posterior facialheight, and facial asymmetry in addition to chronic pain and mobility limitation, great cautionshould be taken. Accordingly, the authors review a general overview of condyle fracture.

  9. Overview of the Nuclear Regulatory Commission's revised 10 CFR Part 20

    International Nuclear Information System (INIS)

    Peterson, H.T. Jr.

    1990-01-01

    The principal Nuclear Regulatory Commission (NRC) regulations covering radiation protection are in Part 20 of Title 10 of the Code of Federal Regulations (10 CFR Part 20). These regulations apply to almost all NRC licensed activities including nuclear power and research reactors, nuclear medicine, industrial radiography and the use of most radioactive isotopes in research. The revised 10 CFR Part 20 is based on the 1977 recommendations of the International Commission on Radiological Protection (ICRP) in ICRP Publication No. 26, implements the 1987 Federal Radiation Guidance on Occupational Exposure and is generally consistent with the 1987 recommendations of the U.S. National Council on Radiation Protection and Measurements (NCRP) in NCRP Report No. 91. There are a number of areas where the Revised Part 20 employs new and more up-to-date scientific information and concepts. One major change is in the use of revised lung and GI tract models and more recent metabolic retention data to calculate Annual Limits on Intake (ALI's) and Derived Air Concentration limits (DAC's). The Appendix B in the Revised Part 20 employs new and more up-to-date scientific information and concepts. One major change is in the use of revised lung and GI tract models and more recent metabolic retention data to calculate Annual Limits on Intake (ALI's) and Derived Air Concentration limits (DAC's). The Appendix B in the Revised Part 20 contains data on occupational ALI's and DCA's and radionuclide concentration limits for releases to the general environment for over 750 radionuclides. The final rule is expected to be published early in September with an implementation data of January 1, 1992

  10. Microsurgical Bypass Training Rat Model, Part 1: Technical Nuances of Exposure of the Aorta and Iliac Arteries.

    Science.gov (United States)

    Tayebi Meybodi, Ali; Lawton, Michael T; Mokhtari, Pooneh; Yousef, Sonia; Gandhi, Sirin; Benet, Arnau

    2017-11-01

    Animal models using rodents are frequently used for practicing microvascular anastomosis-an essential technique in cerebrovascular surgery. However, safely and efficiently exposing rat's target vessels is technically difficult. Such difficulty may lead to excessive hemorrhage and shorten animal survival. This limits the ability to perform multiple anastomoses on a single animal and may increase the overall training time and costs. We report our model for microsurgical bypass training in rodents in 2 consecutive articles. In part 1, we describe the technical nuances for a safe and efficient exposure of the rat abdominal aorta and common iliac arteries (CIAs) for bypass. Over a 2-year period, 50 Sprague-Dawley rats underwent inhalant anesthesia for practicing microvascular anastomosis on the abdominal aorta and CIAs. Lessons learned regarding the technical nuances of vessel exposure were recorded. Several technical nuances were important for avoiding intraoperative bleeding and preventing animal demise while preparing an adequate length of vessels for bypass. The most relevant technical nuances include (1) generous subcutaneous dissection; (2) use of cotton swabs for the blunt dissection of the retroperitoneal fat; (3) combination of sharp and blunt dissection to isolate the aorta and iliac arteries from the accompanying veins; (4) proper control of the posterior branches of the aorta; and (5) efficient division and mobilization of the left renal pedicle. Applying the aforementioned technical nuances enables safe and efficient preparation of the rat abdominal aorta and CIAs for microvascular anastomosis. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  12. Pharmacological Interventions Including Medical Injections for Neck Pain: An Overview as Part of the ICON§ Project

    Science.gov (United States)

    Peloso, Paul M; Khan, Mahweesh; Gross, Anita R; Carlesso, Lisa; Santaguida, Lina; Lowcock, Janet; MacDermid, Joy C; Walton, Dave; Goldsmith, Charlie H; Langevin, Pierre; Shi, Qiyun

    2013-01-01

    Objectives: To conduct an overview (review-of-reviews) on pharmacological interventions for neck pain. Search Strategy: Computerized databases and grey literature were searched from 2006 to 2012. Selection Criteria: Systematic reviews of randomized controlled trials (RCT) in adults with acute to chronic neck pain reporting effects of pharmacological interventions including injections on pain, function/disability, global perceived effect, quality of life and patient satisfaction. Data Collection & Analysis: Two independent authors selected articles, assessed risk of bias and extracted data The GRADE tool was used to evaluate the body of evidence and an external panel provided critical review. Main Results: We found 26 reviews reporting on 47 RCTs. Most pharmacological interventions had low to very low quality methodologic evidence with three exceptions. For chronic neck pain, there was evidence of: a small immediate benefit for eperison hydrochloride (moderate GRADE, 1 trial, 157 participants);no short-term pain relieving benefit for botulinum toxin-A compared to saline (strong GRADE; 5 trial meta-analysis, 258 participants) nor for subacute/chronic whiplash (moderate GRADE; 4 trial meta-analysis, 183 participants) including reduced pain, disability or global perceived effect; andno long-term benefit for medial branch block of facet joints with steroids (moderate GRADE; 1 trial, 120 participants) over placebo to reduce pain or disability; Reviewers' Conclusions: While in general there is a lack of evidence for most pharmacological interventions, current evidence is against botulinum toxin-A for chronic neck pain or subacute/chronic whiplash; against medial branch block with steroids for chronic facet joint pain; but in favour of the muscle relaxant eperison hydrochloride for chronic neck pain. PMID:24155805

  13. Current approaches to treatments for schizophrenia spectrum disorders, part I: an overview and medical treatments

    Directory of Open Access Journals (Sweden)

    Chien WT

    2013-09-01

    Full Text Available Wai Tong Chien, Annie LK Yip School of Nursing, Faculty of Health and Social Sciences, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong Abstract: During the last three decades, an increasing understanding of the etiology, psychopathology, and clinical manifestations of schizophrenia spectrum disorders, in addition to the introduction of second-generation antipsychotics, has optimized the potential for recovery from the illness. Continued development of various models of psychosocial intervention promotes the goal of schizophrenia treatment from one of symptom control and social adaptation to an optimal restoration of functioning and/or recovery. However, it is still questionable whether these new treatment approaches can address the patients' needs for treatment and services and contribute to better patient outcomes. This article provides an overview of different treatment approaches currently used in schizophrenia spectrum disorders to address complex health problems and a wide range of abnormalities and impairments resulting from the illness. There are different treatment strategies and targets for patients at different stages of the illness, ranging from prophylactic antipsychotics and cognitive–behavioral therapy in the premorbid stage to various psychosocial interventions in addition to antipsychotics for relapse prevention and rehabilitation in the later stages of the illness. The use of antipsychotics alone as the main treatment modality may be limited not only in being unable to tackle the frequently occurring negative symptoms and cognitive impairments but also in producing a wide variety of adverse effects to the body or organ functioning. Because of varied pharmacokinetics and treatment responsiveness across agents, the medication regimen should be determined on an individual basis to ensure an optimal effect in its long-term use. This review also highlights that the recent practice guidelines and standards have

  14. [Qualitative research in health services research - discussion paper, Part 2: Qualitative research in health services research in Germany - an overview].

    Science.gov (United States)

    Karbach, U; Stamer, M; Holmberg, C; Güthlin, C; Patzelt, C; Meyer, T

    2012-08-01

    This is the second part of a 3-part discussion paper by the working group on "Qualitative Methods" in the German network of health services research (DNVF) that shall contribute to the development of a memorandum concerning qualitative health services research. It aims to depict the different types of qualitative research that are conducted in health services research in Germany. In addition, the authors present a specific set of qualitative data collection and analysis tools to demonstrate the potential of qualitative research for health services research. QUALITATIVE RESEARCH IN HEALTH SERVICES RESEARCH - AN OVERVIEW: To give an overview of the types of qualitative research conducted in German health services research, the abstracts of the 8th German Conference on Health Services Research were filtered to identify qualitative or mixed-methods studies. These were then analysed by looking at the context which was studied, who was studied, the aims of the studies, and what type of methods were used. Those methods that were mentioned most often for data collection and analysis are described in detail. QUALITATIVE RESEARCH AT THE CONFERENCE FOR HEALTH SERVICES RESEARCH 2009: Approximately a fifth of all abstracts (n=74) had a qualitative (n=47) or a mixed-methods approach combining quantitative and qualitative methods (n=27). Research aims included needs assessment (41%), survey development (36%), evaluation (22%), and theorizing (1%). Data collection mostly consisted of one-on-one interviews (n=45) and group discussions (n=29). Qualitative content analysis was named in 35 abstracts, 30 abstracts did not reference their method of analysis. In addition to a quantitative summary of the abstract findings, the diversity of fields addressed by qualitative methods is highlighted. Although drawing conclusions on the use of qualitative methods in German health services research from the analysis of conference abstracts is not possible, the overview we present demonstrates the

  15. Characterization of the radon source in North-Central Florida. Final report part 1 -- Final project report; Final report part 2 -- Technical report

    International Nuclear Information System (INIS)

    1997-01-01

    This report contains two separate parts: Characterization of the Radon Source in North-Central Florida (final report part 1 -- final project report); and Characterization of the Radon Source in North-Central Florida (technical report). The objectives were to characterize the radon 222 source in a region having a demonstrated elevated indoor radon potential and having geology, lithology, and climate that are different from those in other regions of the U.S. where radon is being studied. Radon availability and transport in this region were described. Approaches for predicting the radon potential of lands in this region were developed

  16. The PMIP4 contribution to CMIP6 - Part 1: Overview and over-arching analysis plan

    Science.gov (United States)

    Kageyama, Masa; Braconnot, Pascale; Harrison, Sandy P.; Haywood, Alan M.; Jungclaus, Johann H.; Otto-Bliesner, Bette L.; Peterschmitt, Jean-Yves; Abe-Ouchi, Ayako; Albani, Samuel; Bartlein, Patrick J.; Brierley, Chris; Crucifix, Michel; Dolan, Aisling; Fernandez-Donado, Laura; Fischer, Hubertus; Hopcroft, Peter O.; Ivanovic, Ruza F.; Lambert, Fabrice; Lunt, Daniel J.; Mahowald, Natalie M.; Peltier, W. Richard; Phipps, Steven J.; Roche, Didier M.; Schmidt, Gavin A.; Tarasov, Lev; Valdes, Paul J.; Zhang, Qiong; Zhou, Tianjun

    2018-03-01

    This paper is the first of a series of four GMD papers on the PMIP4-CMIP6 experiments. Part 2 (Otto-Bliesner et al., 2017) gives details about the two PMIP4-CMIP6 interglacial experiments, Part 3 (Jungclaus et al., 2017) about the last millennium experiment, and Part 4 (Kageyama et al., 2017) about the Last Glacial Maximum experiment. The mid-Pliocene Warm Period experiment is part of the Pliocene Model Intercomparison Project (PlioMIP) - Phase 2, detailed in Haywood et al. (2016).The goal of the Paleoclimate Modelling Intercomparison Project (PMIP) is to understand the response of the climate system to different climate forcings for documented climatic states very different from the present and historical climates. Through comparison with observations of the environmental impact of these climate changes, or with climate reconstructions based on physical, chemical, or biological records, PMIP also addresses the issue of how well state-of-the-art numerical models simulate climate change. Climate models are usually developed using the present and historical climates as references, but climate projections show that future climates will lie well outside these conditions. Palaeoclimates very different from these reference states therefore provide stringent tests for state-of-the-art models and a way to assess whether their sensitivity to forcings is compatible with palaeoclimatic evidence. Simulations of five different periods have been designed to address the objectives of the sixth phase of the Coupled Model Intercomparison Project (CMIP6): the millennium prior to the industrial epoch (CMIP6 name: past1000); the mid-Holocene, 6000 years ago (midHolocene); the Last Glacial Maximum, 21 000 years ago (lgm); the Last Interglacial, 127 000 years ago (lig127k); and the mid-Pliocene Warm Period, 3.2 million years ago (midPliocene-eoi400). These climatic periods are well documented by palaeoclimatic and palaeoenvironmental records, with climate and environmental changes

  17. Overview of diagnosis and management of paediatric headache. Part II: therapeutic management.

    Science.gov (United States)

    Termine, Cristiano; Ozge, Aynur; Antonaci, Fabio; Natriashvili, Sophia; Guidetti, Vincenzo; Wöber-Bingöl, Ciçek

    2011-02-01

    A thorough evaluation of headache in children and adolescents is necessary to make the correct diagnosis and initiate treatment. In part 1 of this article (Özge et al. in J Headache Pain, 2010), we reviewed the diagnosis of headache in children and adolescents. In the present part, we will discuss therapeutic management of primary headaches. An appropriate management requires an individually tailored strategy giving due consideration to both non-pharmacological and pharmacological measures. Non-pharmacological treatments include relaxation training, biofeedback training, cognitive-behavioural therapy, different psychotherapeutic approaches or combinations of these treatments. The data supporting the effectiveness of these therapies are less clear-cut in children than in adults, but that is also true for the data supporting medical treatment. Management of migraine and TTH should include strategies relating to daily living activities, family relationships, school, friends and leisure time activities. In the pharmacological treatment age and gender of children, headache diagnosis, comorbidities and side effects of medication must be considered. The goal of symptomatic treatment should be a quick response with return to normal activity and without relapse. The drug should be taken as early as possible and in the appropriate dosage. Supplementary measures such as rest in a quiet, darkened room is recommended. Pharmaco-prophylaxis is only indicated if lifestyle modification and non-pharmacological prophylaxis alone are not effective. Although many prophylactic medications have been tried in paediatric migraine, there are only a few medications that have been studied in controlled trials. Multidisciplinary treatment is an effective strategy for children and adolescents with improvement of multiple outcome variants including frequency and severity of headache and school days missed because of headache. As a growing problem both children and families should be informed

  18. New handling systems as technical support for the working process. Part 6. Feeding devices

    Energy Technology Data Exchange (ETDEWEB)

    Becher, H; Burkhardt, R; Drexel, P; Graf, B; Krreis, W

    1982-03-01

    Social, technical and economic reasons require an enhanced application of handling systems such as industrial robots. Quality and efficiency of an industrial robot depends greatly on feeding devices, and the ARGE-HHS within its project new handling systems as a technical aid in the working process intends to analyze all feeding devices that are likely to be most suitable for advanced applications. Forty one feeding devices were developed, known devices were modified, adapted to different applications, and tested. A variety of feeding devices for most applications in the field of material handling is reported.

  19. Strategies for Solving Potential Problems Associated with Laboratory Diffusion and Batch Experiments - Part 1: An Overview of Conventional Test Methods

    International Nuclear Information System (INIS)

    Zhang, M.; Takeda, M.; Nakajima, H.

    2006-01-01

    Laboratory diffusion testing as well as batch experiments are well established and widely adopted techniques for characterizing the diffusive and adsorptive properties of geological, geotechnical, and synthetic materials in both scientific and applied fields, including geological disposal of radioactive waste. Although several types of diffusion test, such as the through- diffusion test, in-diffusion test, out-diffusion test, and column test, are currently available, different methods may have different advantages and disadvantages. In addition, traditional methods may have limitations, such as the need for relatively long test times, cumbersome test procedures, and the possibility of errors due to differences between analytical assumptions and actual test conditions. Furthermore, traditional batch experiments using mineral powders are known to overestimate the sorption coefficient. In part 1 of this report, we present a brief overview of laboratory diffusion and batch experiments. The advantages, disadvantages, limitations, and/or potential problems associated with individual tests were compared and summarized. This comprehensive report will provide practical references for reviewing the results obtained from relevant experiments, especially from the viewpoint of regulation. To solve and/or eliminate the potential problems associated with conventional methods, and to obtain the diffusion coefficient and rock capacity factor from a laboratory test both rapidly and accurately, part 2 of this study discusses possible strategies involving the development of rigorous solutions to some relevant test methods, and sensitivity analyses for the related tests that may be helpful to judge the accuracy of the two parameters to be determined from individual tests. (authors)

  20. US Health Care Reform and Transplantation. Part I: overview and impact on access and reimbursement in the private sector.

    Science.gov (United States)

    Axelrod, D A; Millman, D; Abecassis, M M

    2010-10-01

    The Health Care Reform (HCR) legislation passed by Congress in 2010 will have significant impact on transplant centers, patients and health care professionals. The Act seeks to expand coverage, limit the growth in health care costs and reform the delivery and insurance systems. In Part I of this two part series, we provide an overview and perspective of changes in private health insurance resulting from HCR. Under the plan, all Americans will be required to purchase coverage through their employer or via an improved individual/small group market. This legislation limits abusive practices such as limitations on preexisting conditions, lifetime and annual coverage limitations and dropping of beneficiaries if they become sick. The legislation will also limit high-cost plans and regulate premium increases. Private sector reforms are likely to benefit our patients by increasing the number of patients with access to transplant services, since the use of 'preexisting' conditions will be eliminated. However without a concomitant increase in the organ supply, longer waiting times and greater use of marginal organs are likely to increase the cost of transplant. Furthermore, transplant providers will receive reduced reimbursement as a result of market consolidation and the growing power of large transplant networks.

  1. An overview of two years of ozone radio soundings over Cotonou as part of AMMA

    Directory of Open Access Journals (Sweden)

    V. Thouret

    2009-08-01

    Full Text Available As part of the African Monsoon Multidisciplinary Analysis (AMMA program, a total of 98 ozone vertical profiles over Cotonou, Benin, have been measured during a 26 month period (December 2004–January 2007. These regular measurements broadly document the seasonal and interannual variability of ozone in both the troposphere and the lower stratosphere over West Africa for the first time. This data set is complementary to the MOZAIC observations made from Lagos between 0 and 12 km during the period 1998–2004. Both data sets highlight the unique way in which West Africa is impacted by two biomass burning seasons: in December–February (dry season due to burning in the Sahelian band and in June-August (wet season due to burning in southern Africa. High interannual variabilities between Cotonou and Lagos data sets and within each data set are observed and are found to be a major characteristic of this region. In particular, the dry and wet seasons are discussed in order to set the data of the Special Observing Periods (SOPs into a climatological context. Compared to other dry and wet seasons, the 2006 dry and wet season campaigns took place in rather high ozone environments. During the sampled wet seasons, southern intrusions of biomass burning were particularly frequent with concentrations up to 120 ppbv of ozone in the lower troposphere. An insight into the ozone distribution in the upper troposphere and the lower stratosphere (up to 26 km is given. The first tropospheric columns of ozone based on in-situ data over West Africa are assessed. They compare well with satellite products on seasonal and interannual time-scales, provided that the layer below 850 hPa where the remote instrument is less sensitive to ozone, is removed.

  2. Nuclear fuel technology - Tank calibration and volume determination for nuclear materials accountancy - Part 1: Procedural overview

    International Nuclear Information System (INIS)

    2007-01-01

    Accurate determinations of volume are a fundamental component of any measurement-based system of control and accountability in a facility that processes or stores nuclear materials in liquid form. Volume determinations are typically made with the aid of a calibration or volume measurement equation that relates the response of the tank's measurement system to some independent measure of tank volume. The ultimate purpose of the calibration exercise is to estimate the tank's volume measurement equation (the inverse of the calibration equation), which relates tank volume to measurement system response. The steps carried out to acquire data for estimating the tank's calibration or volume measurement equation are collectively described as the process of tank calibration. This part of ISO 18213 describes procedures for tank calibration and volume determination for nuclear process tanks equipped with pressure-measurement systems for determining liquid content. Specifically, overall guidance is provided for planning a calibration exercise undertaken to obtain the data required for the measurement equation to estimate a tank's volume. The key steps in the procedure are also presented for subsequently using the estimated volume-measurement equation to determine tank liquid volumes. The procedures presented apply specifically to tanks equipped with bubbler probe systems for measuring liquid content. Moreover, these procedures produce reliable results only for clear (i.e. without suspended solids), homogeneous liquids that are at both thermal and static equilibrium. The paper elaborates on scope, physical principles involved, the calibration model, equipment required, a typical tank calibration procedure, calibration planning and pre-calibration activities, and volume determination. A bibliography is provided

  3. Unified English Braille in the United Kingdom: Part 1--Examination by Technical Expert Braille Users

    Science.gov (United States)

    Cryer, Heather; Home, Sarah; Morley Wilkins, Sarah

    2013-01-01

    The Unified English Braille (UEB) code has already been adopted by various countries. To inform the decision about UK adoption, a suite of research was carried out with UK braille readers and other stakeholders. Previous research indicates that readers of technical braille codes may be most affected by a move to UEB. In this study, six technical…

  4. Performance of simulated flexible integrated gasification polygeneration facilities. Part A: A technical-energetic assessment

    NARCIS (Netherlands)

    Meerman, J.C.; Ramírez Ramírez, C.A.; Turkenburg, W.C.; Faaij, A.P.C.

    2011-01-01

    This article investigates technical possibilities and performances of flexible integrated gasification polygeneration (IG-PG) facilities equipped with CO2 capture for the near future. These facilities can produce electricity during peak hours, while switching to the production of chemicals during

  5. Technical Reports (Part I). End of Project Report, 1968-1971, Volume III.

    Science.gov (United States)

    Western Nevada Regional Education Center, Lovelock.

    The pamphlets included in this volume are technical reports prepared as outgrowths of the Student Information Systems of the Western Nevada Regional Education Center (WN-REC) funded by a Title III (Elementary and Secondary Education Act) grant. These reports describe methods of interpreting the printouts from the Student Information System;…

  6. Technical Reports (Part II). End of Project Report, 1968-1971, Volume IV.

    Science.gov (United States)

    Western Nevada Regional Education Center, Lovelock.

    The pamphlets included in this volume are technical reports prepared as outgrowths of the Student Information System of the Western Nevada Regional Education Center funded by a Title III grant under the Elementary and Secondary Education Act of 1965. These reports demonstrate the use of the stored data; methods of interpreting the printouts from…

  7. A critical overview of non-aqueous capillary electrophoresis. Part II: separation efficiency and analysis time.

    Science.gov (United States)

    Kenndler, Ernst

    2014-03-28

    A survey of the literature on non-aqueous capillary zone electrophoresis leaves one with the impression of a prevailing notion that non-aqueous conditions are principally more favorable than conventional aqueous media. Specifically, the application of organic solvents in capillary zone electrophoresis (CZE) is believed to provide the general advantages of superior separation efficiency, higher applicable electric field strength, and shorter analysis time. These advantages, however, are often claimed without providing any experimental evidence, or based on rather uncritical comparisons of limited sets of arbitrarily selected separation results. Therefore, the performance characteristics of non-aqueous vs. aqueous CZE certainly deserve closer scrutiny. The primary intention of Part II of this review is to give a critical survey of the literature on non-aqueous capillary electrophoresis (NACE) that has emerged over the last five years. Emphasis is mainly placed on those studies that are concerned with the aspects of plate height, plate number, and the crucial mechanisms contributing to zone broadening, both in organic and aqueous conditions. To facilitate a deeper understanding, this treatment covers also the theoretical fundamentals of peak dispersion phenomena arising from wall adsorption; concentration overload (electromigration dispersion); longitudinal diffusion; and thermal gradients. Theoretically achievable plate numbers are discussed, both under limiting (at zero ionic strength) and application-relevant conditions (at finite ionic strength). In addition, the impact of the superimposed electroosmotic flow contributions to overall CZE performance is addressed, both for aqueous and non-aqueous media. It was concluded that for peak dispersion due to wall adsorption and due to concentration overload (electromigration dispersion, leading to peak triangulation) no general conjunction with the solvent can be deduced. This is in contrast to longitudinal diffusion: the

  8. The back end of the nuclear fuel cycle: technical and economic analysis-Part 1

    International Nuclear Information System (INIS)

    Roglans-Ribas, J.; Spinrad, B.I.

    1990-01-01

    The back end of the nuclear fuel cycle has been analyzed under current conditions in the United States, taking into consideration the framework defined by the Nuclear Waste Policy Act of 1982 and its amendments. The different steps of the back end of the fuel cycle are studied and different alternatives are compared under technical and economic criteria. Several technical issues have been analyzed for their impact on the economics of the fuel cycle. The bases for the analysis are explained, and the results for a once-through cycle are presented. The results show that a repository in tuff represents the minimum cost situation. The economic model appears very sensitive to several parameters, in particular the period of retrievability and the storage costs

  9. Overview of decommissioning and decontamination technical information support activities funded by the US Department of Energy's remedial action programs

    International Nuclear Information System (INIS)

    Owen, P.T.

    1986-01-01

    In 1979 the US Department of Energy (DOE) established the Remedial Action Program Information Center (RAPIC) at the Oak Ridge National Laboratory to provide technical information support to the Surplus Facilities Management Program, DOE's national decommissioning and decontamination (D and D) program which is managed by DOE's Richland Operations Office and UNC Nuclear Industries, Inc., and to the other DOE remedial action programs. Specific information activities that RAPIC performs to support the DOE's programs and the D and D community include: maintaining a computerized bibliographic database containing about 4500 annotated citations (about 2000 on D and D) and a database of 1800 contacts involved with remedial action work at radioactively contaminated sites; publishing an annual bibliography, ''Nuclear Facility Decommissioning and Site Remedial Actions, A Selected Bibliography,'' ORNL/EIS-154 (six volumes published); maintaining a document repository and providing copies of requested publications; and performing manual and computerized searches of the technical literature. The most significant RAPIC function is serving as a focal point for D and D information. With the extensive resources at its command, RAPIC is in a unique position to provide a comprehensive information base to the D and D community. DOE makes these services available to foster good public relations and promote cooperation and information exchange

  10. An overview of remedial action technical information support activities funded by the US Department of Energy's Office of Environmental Restoration

    International Nuclear Information System (INIS)

    Owen, P.T.

    1990-01-01

    In 1979 the US Department of Energy (DOE) established the Remedial Action Program Information Center (RAPIC) at the Oak Ridge National Laboratory (ORNL) to provide technical information support to the DOE's Remedial Action Programs, which comprise: Formerly Utilized Sites Remedial Action Program (FUSRAP), Surplus Facilities Management Program (SFMP), and Uranium Mill Tailings Remedial Action Program (UMTRAP). Specific information activities that RAPIC performs to support the DOE's programs include: maintaining a computerized bibliographic database containing approximately 7000 annotated references relevant to remediation work at radioactively contaminated sites; publishing an annual bibliography, Nuclear Facility Decommissioning and Site Remedial Actions, A Selected Bibliography, ORNL/EIS-154; maintaining a document repository and providing copies of requested publications; and performing manual and computerized searches of the technical literature. The most important RAPIC function is serving as a focal point for remedial action information. With these extensive resources at its command, RAPIC is in a unique position to provide a comprehensive information base to the remedial action and environmental restoration community

  11. ATS-6 - Technical aspects of the Health/Education Telecommunications Experiment

    Science.gov (United States)

    Boor, J. L.; Braunstein, J.; Janky, J. M.; Ogden, D.; Potter, J. G.; Harper, E. L.; Volkmer, E.; Whalen, A. A.; Henderson, E.; Hupe, H. H.

    1975-01-01

    An overview is given of the HET experiment on ATS-6. The paper is divided into nine parts, including a technical overview, a preliminary evaluation of the HET demonstration, a review of operations at the Denver uplink terminal, a discussion of remote ground terminals, a review of C-band comprehensive terminals and of S-band comprehensive terminals, and parts devoted to general network operations, technical management and effectiveness of the network, and the site equipment operator.

  12. Military Curricula for Vocational & Technical Education. Club Restaurant Operations, Part II, 9-10.

    Science.gov (United States)

    Army Quartermaster School, Ft. Lee, VA.

    These programmed instructional materials for part 2 of a secondary-postsecondary subcourse in club management operations are one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in civilian settings. This part of the subcourse consists of three lessons and an…

  13. Overview and technical and practical aspects for use of geostatistics in hazardous-, toxic-, and radioactive-waste-site investigations

    International Nuclear Information System (INIS)

    Bossong, C.R.; Karlinger, M.R.; Troutman, B.M.; Vecchia, A.V.

    1999-01-01

    Technical and practical aspects of applying geostatistics are developed for individuals involved in investigation at hazardous-, toxic-, and radioactive-waste sites. Important geostatistical concepts, such as variograms and ordinary, universal, and indicator kriging, are described in general terms for introductory purposes and in more detail for practical applications. Variogram modeling using measured ground-water elevation data is described in detail to illustrate principles of stationarity, anisotropy, transformations, and cross validation. Several examples of kriging applications are described using ground-water-level elevations, bedrock elevations, and ground-water-quality data. A review of contemporary literature and selected public domain software associated with geostatistics also is provided, as is a discussion of alternative methods for spatial modeling, including inverse distance weighting, triangulation, splines, trend-surface analysis, and simulation

  14. Global Biofuels at the Crossroads: An Overview of Technical, Policy, and Investment Complexities in the Sustainability of Biofuel Development

    Directory of Open Access Journals (Sweden)

    Kathleen Araújo

    2017-03-01

    Full Text Available Biofuels have the potential to alter the transport and agricultural sectors of decarbonizing societies. Yet, the sustainability of these fuels has been questioned in recent years in connection with food versus fuel trade-offs, carbon accounting, and land use. Recognizing the complicated playing field for current decision-makers, we examine the technical attributes, policy, and global investment activity for biofuels (primarily liquids. Differences in feedstock and fuel types are considered, in addition to policy approaches of major producer countries. Issues with recent, policy-driven trade developments are highlighted to emphasize how systemic complexities associated with sustainability must also be managed. We conclude with near-term areas to watch.

  15. Technical-economic modelling of an aluminium high pressure die casting system for automotive parts fabrication

    International Nuclear Information System (INIS)

    Faura, F.

    1997-01-01

    In the present paper a technical-economic model for an aluminium high pressure die casting system has been developed. In order to obtain the necessary data for correlations utilized by the model, has been analyzed the production systems of companies that use these processes. This has allowed to determine the most important technological variables that affect to the economical aspect of the process. A computer application has been developed which allows to explore easily the influence of different system parameters. (Author) 12 refs

  16. Mathematical model of a utility firm. Final technical report, Part IIA

    Energy Technology Data Exchange (ETDEWEB)

    1983-08-21

    This volume is part of a project aimed at developing an understanding of the dynamical processes that evolve within an electric utility firm, and without it. The volume covers organizational dynamics and many-person symmetric games. (DLC)

  17. An overview of the political, technical and economical aspects of gas-fired distributed energy system in China

    International Nuclear Information System (INIS)

    Chen, Qiaohui; Wang, Weilong; Lu, Jianfeng; Ding, Jing

    2013-01-01

    The interest in distributed energy system has been increasing in China in recent years due to the environmental and energy policy concerns. The distributed energy system generates power, heating and cooling to residential, commercial and industrial facilities. Due to cascade utilization of energy, it can make good use of energy to improve energy efficiency and to increase energy savings. Furthermore, it consumes less energy and reduces carbon emissions. This paper reviews existing and newly-built gas-fired distributed energy projects in China. The techno-economic assessment of the selected projects has also been discussed and reported. The results show that in Xiamen Jimei DE project, the primary energy ratio of the DES can be as high as 92.9%, and energy-saving rate is 35.5%. Moreover, exergy efficiency reaches 54.3%, and the system can reduce 0.52 million tons of CO 2 annually. -- Highlights: ► The political, technical and economical aspects of gas-fired DES are analyzed. ► The techno-economic assessment of two selected projects is conducted. ► Primary energy ratio can be as high as 92.9% and energy-saving rate is 35.5%. ► Exergy efficiency is 54.3% and the system can reduce a large amount of CO 2 emissions

  18. A Research Synthesis of Therapeutic Interventions for Whiplash-Associated Disorder: Part 1 – Overview and Summary

    Directory of Open Access Journals (Sweden)

    Robert W Teasell

    2010-01-01

    Full Text Available Whiplash-associated disorder (WAD represents a significant public health problem, resulting in a substantial socioeconomic burden throughout the industrialized world, wherever costs are documented. While many treatments have been advocated for patients with WAD, scientific evidence of their effectiveness is often lacking. A systematic review was conducted to evaluate the strength of evidence supporting various WAD therapies. Multiple databases (including Web of Science, EMBASE and PubMed were searched to identify all studies published from January 1980 through March 2009 that evaluated the effectiveness of any clearly defined treatment for acute (less than two weeks, subacute (two to 12 weeks or chronic (longer than 12 weeks WAD. The present article, the first in a five-part series, provides an overview of the review methodology as well as a summary and discussion of the review’s main findings. Eighty-three studies met the inclusion criteria, 40 of which were randomized controlled trials. The majority of studies (n=47 evaluated treatments initiated in the chronic stage of the disorder, while 23 evaluated treatments for acute WAD and 13 assessed therapies for subacute WAD. Exercise and mobilization programs for acute and chronic WAD had the strongest supporting evidence, although many questions remain regarding the relative effectiveness of various protocols. At present, there is insufficient evidence to support any treatment for subacute WAD. For patients with chronic WAD who do not respond to conventional treatments, it appears that radiofrequency neurotomy may be the most effective treatment option. The present review found a relatively weak but growing research base on which one could make recommendations for patients at any stage of the WAD continuum. Further research is needed to determine which treatments are most effective at reducing the disabling symptoms associated with WAD.

  19. Technical report on levels of electromagnetic fields created by Linky meters. Part 1: laboratory measurements; Part 2: laboratory additional measurements; Part 3: field measurements

    International Nuclear Information System (INIS)

    2016-05-01

    The first part of this study reports measurements of electromagnetic radiations induced by remote-metering reading devices present in new power meters and using the Power-Line Communication (PLC or, in French, CPL) technology, such as the Linky meter. After a recall of legislation regarding exposure to electromagnetic waves, this first part present the two tested meters (Linky of first and third generation, G1 and G3), the performed tests, measurements devices and method. It more precisely reports investigations performed on these both meters, and a comparison with other home appliances. The second part reports additional measurements performed with both meters according to the same methodology, but with the use of a new electric field probe which allows more precise measurements. Maximum electric and magnetic fields have been measured. The third part reports field measurements performed with the same methodology but in dwellings equipped with Linky meters of first generation (G1). Exposure levels have been measured at the vicinity of meters and in other parts of the dwelling

  20. Military Curricula for Vocational & Technical Education. Club Restaurant Operations, Part I, 9-9.

    Science.gov (United States)

    Army Quartermaster School, Ft. Lee, VA.

    These reading materials, self-test reviews, and examination for part 1 of a secondary-postsecondary subcourse in club management operations are one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in civilian settings. Five lessons focusing on two topics are included…

  1. ASHRAE transactions 1999: Technical and symposium papers. Volume 105, Part 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This book contains 50 technical papers and 83 symposium papers. The symposium papers are divided into the following sections: Computer Models for Fire and Smoke Control; Thermal Properties and Estimation Techniques of Ground-Coupled Heat Pump Boreholes, Grouts, and Fills; Advances in Thermal and Fluid Characteristics in HVAC and Refrigeration Processes; Effects of Controlling Humidity on Energy Consumption of Supermarkets; Fault Detection and Diagnostics -- Learning from Building Operations; Innovative Methods for Room Air Distribution; Laboratory Exhaust Fans and Stacks; Full Scale Tests in Very Large Spaces and CFD Modeling; Laboratory Verification and Testing; Absorption/Sorption Heat Pumps and Refrigeration Systems; Attic and Cathedral Ceilings II; Health Care Issues Update; Computers in HVAC Education; Multizone Modeling of Ventilation and Infiltration in Residential Buildings; Documenting the Value of a Facility of Corporate Energy Manager; Water Heating systems Information and Design Tools; Snow Melting: System Assessment; Fault Detection and Diagnostics (FDD) Methods and Evaluation Techniques; The Effects of Commissioning and O and M on IAQ; Energy Efficiency in Commercial Food Service Facilities; Historical Views of Steam, Ice and Refrigerants; Low Total Equivalent Warming Impact (TWEI) Unitary Air Conditioners and Heat Pump Systems; and Second Law Studies of Systems and Processes. Separate abstracts were prepared for most papers in this book.

  2. Technical Parts For Application E-Procurement in the Republic of Kosovo

    Directory of Open Access Journals (Sweden)

    Besnik HAJDARI

    2018-04-01

    Full Text Available Electronic procurement in the Republic of Kosovo has begun in 2012, had it not been for the accomplishment goals and development and implementation of electronic procurement in the Republic of Kosovo fully realized. e-Procurement is not only the publication of procurement results, but is a reflection of a defined legal process on procurement. The Internet are presented records of all claims, also via the Internet can be sent to all offers. Research: Through management system throughout the procurement process electronically will enable the preservation of technical and financial evaluation of bids. Thus, the presentation of this process in a transparent manner increases the reliability and efficiency. Method: Also through the management system of this process, according to the rights defined by law, each party can see the appeal process and remotely via the Internet. Implementation of e-procurement will enable the removal of barriers that were presented earlier, increasing the confidence of all parties involved. Access will be granted to all interested parties by allowing the approaches to the law, while in the case of restrictions should use electronic identification (e-ID. Result: The categorization of approaches will be for each separately, including contracting authority, contractors, bidders, complainers, the proxies of budgetary units, auditors and other categories defined under applicable laws. Security of information in e-procurement will be the maximum. As with any other service access to e-procurement will be provided through the state portal.

  3. Technical Monitoring System for a New Part of Gdańsk Deepwater Container Terminal

    Directory of Open Access Journals (Sweden)

    Miśkiewicz Mikołaj

    2017-04-01

    Full Text Available Development strategy for the port of Gdańsk assumes that , up to 2027, it will become the main transport centre in the Baltic Sea region. To this end , for many years work has been carried out to facilitate access to the port both by sea and land. One of the elements of extension of the port is the building of another terminal of Deepwater Container Terminal, Gdańsk. In this task, geotechnical operations aimed at appropriate preparation of subgrade for storage of containers and operation of cranes, have been especially important. Effectiveness of the assumed design solution of land-side girder for gantry crane has been verified by means of a technical monitoring system. This paper presents main elements of design the land-side girder of a new quay of the container terminal in Gdańsk, together with its computational analysis, as well as the results collected during a few months of observation, which have revealed real work of monitored elements.

  4. Final Technical Report summarizing Purdue research activities as part of the DOE JET Topical Collaboration

    International Nuclear Information System (INIS)

    Molnar, Denes

    2015-01-01

    This report summarizes research activities at Purdue University done as part of the DOE JET Topical Collaboration. These mainly involve calculation of covariant radiative energy loss in the (Djordjevic-)Gyulassy-Levai-Vitev ((D)GLV) framework for relativistic A+A reactions at RHIC and LHC energies using realistic bulk medium evolution with both transverse and longitudinal expansion. The single PDF file provided also includes a report from the entire JET Collaboration.

  5. Final Technical Report summarizing Purdue research activities as part of the DOE JET Topical Collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Molnar, Denes [Purdue Univ., West Lafayette, IN (United States). Dept. of Physics and Astronomy

    2015-09-01

    This report summarizes research activities at Purdue University done as part of the DOE JET Topical Collaboration. These mainly involve calculation of covariant radiative energy loss in the (Djordjevic-)Gyulassy-Levai-Vitev ((D)GLV) framework for relativistic A+A reactions at RHIC and LHC energies using realistic bulk medium evolution with both transverse and longitudinal expansion. The single PDF file provided also includes a report from the entire JET Collaboration.

  6. 29th Intersociety energy conversion engineering conference: Technical papers. Part 1

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    Part 1 of these proceedings contains 96 papers covering the following topics: Aircraft power; Aerospace power systems--Automation; Batteries for aerospace power; Computer modeling of spacecraft systems; Fuel cells for aerospace; Power electronics; Power management and distribution; Space solar power; Space power systems; Solar dynamic ground test demonstrator; Space nuclear systems--Applications; Space nuclear systems--Reactor technology thermionics; Space nuclear systems reactor technology--Thermoelectrics; Space nuclear systems--Bimodal propulsion; Space nuclear systems--Isotopic power; and Space nuclear systems--thermoelectric materials. Most of the papers have been processed separately for inclusion on the data base

  7. Patch-based anisotropic diffusion scheme for fluorescence diffuse optical tomography—part 1: technical principles

    International Nuclear Information System (INIS)

    Correia, Teresa; Arridge, Simon

    2016-01-01

    Fluorescence diffuse optical tomography (fDOT) provides 3D images of fluorescence distributions in biological tissue, which represent molecular and cellular processes. The image reconstruction problem is highly ill-posed and requires regularisation techniques to stabilise and find meaningful solutions. Quadratic regularisation tends to either oversmooth or generate very noisy reconstructions, depending on the regularisation strength. Edge preserving methods, such as anisotropic diffusion regularisation (AD), can preserve important features in the fluorescence image and smooth out noise. However, AD has limited ability to distinguish an edge from noise. In this two-part paper, we propose a patch-based anisotropic diffusion regularisation (PAD), where regularisation strength is determined by a weighted average according to the similarity between patches around voxels within a search window, instead of a simple local neighbourhood strategy. However, this method has higher computational complexity and, hence, we wavelet compress the patches (PAD-WT) to speed it up, while simultaneously taking advantage of the denoising properties of wavelet thresholding. The proposed method combines the nonlocal means (NLM), AD and wavelet shrinkage methods, which are image processing methods. Therefore, in this first paper, we used a denoising test problem to analyse the performance of the new method. Our results show that the proposed PAD-WT method provides better results than the AD or NLM methods alone. The efficacy of the method for fDOT image reconstruction problem is evaluated in part 2. (paper)

  8. World Solar Challenge 1993 Technical Report. Part 2. Darwin to Adelaide. (November 7-November 16, 1993)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-01-01

    This is a report of the above-named solar car race from Darwin to Adelaide, Australia. In this Part II, details are described of motors, controllers, transmissions, batteries, battery management, suspensions, travelling wheels, tires, strategies, communications, weather prediction, safety, and so forth. As for motors, a regenerative motor which generates power during car deceleration may also be used. Nineteen manufacturers and six teams used various kinds of motors. One was equipped with a wheel motor devoid of a transmission, with the motor built into the wheel. While it is possible to drive across the continent without a storage battery as in the case of the 1990 event, one should be installed, to be stored up under favorable conditions for use in hill climbing. For the Honda and Nissan teams, tough and efficient batteries, though not high in energy density, were selected. (NEDO)

  9. Y-12 Development Organization technical progress report: Part 3 -- Metal processing, period ending March 1, 1994

    International Nuclear Information System (INIS)

    Northcutt, W.G. Jr.

    1994-01-01

    As part of the effort to downsize its uranium processing facilities, the Y-12 Plant has supported an investigation to identify extraction solvents that would both work efficiently in centrifugal contactors and be disposed of easily. Various organic ethers, hydroxy ethers, ether ketones, acids, amides, and diketones were studied for their ability to extract uranyl nitrate from aqueous solutions. Although many of these solvents were obtained commercially, others had to be synthesized in-house. The authors found a large range of extraction coefficients for these solvents. Because of steric hindrance or some other factor, certain ethers performed poorly. On the other hand, various mono- and diethers of tetrahydrofurfuryl alcohol exhibited excellent extraction and stripping coefficients for uranyl nitrate, justifying purchase of a pilot plant batch of one of this family of solvents. Likewise, the authors determined the extraction coefficient for one of the two amides synthesized in-house to be quite high

  10. Technical Evaluation Report, Part A - Vortex Flow and High Angle of Attack

    Science.gov (United States)

    Luckring, James M.

    2003-01-01

    A symposium entitled Vortex Flow and High Angle of Attack was held in Loen, Norway, from May 7 through May 11, 2001. The Applied Vehicle Technology (AVT) panel, under the auspices of the Research and Technology Organization (RTO), sponsored this symposium. Forty-eight papers, organized into nine sessions, addressed computational and experimental studies of vortex flows pertinent to both aircraft and maritime applications. The studies also ranged from fundamental fluids investigations to flight test results, and significant results were contributed from a broad range of countries. The principal emphasis of this symposium was on "the understanding and prediction of separation-induced vortex flows and their effects on military vehicle performance, stability, control, and structural design loads." It was further observed by the program committee that "separation- induced vortex flows are an important part of the design and off-design performance of conventional fighter aircraft and new conventional or unconventional manned or unmanned advanced vehicle designs (UAVs, manned aircraft, missiles, space planes, ground-based vehicles, and ships)." The nine sessions addressed the following topics: vortical flows on wings and bodies, experimental techniques for vortical flows, numerical simulations of vortical flows, vortex stability and breakdown, vortex flows in maritime applications, vortex interactions and control, vortex dynamics, flight testing, and vehicle design. The purpose of this paper is to provide brief reviews of these papers along with some synthesizing perspectives toward future vortex flow research opportunities. The paper includes the symposium program. (15 refs.)

  11. Technical evaluation of the proposed design modifications and technical specification changes on grid voltage degradation (Part A) for the Pilgrim Nuclear Power Station, Unit 1

    International Nuclear Information System (INIS)

    White, R.L.

    1980-01-01

    This report documents the technical evaluation of the proposed design modifications and Technical Specification changes for protection of Class 1E equipment from grid voltage degradation for the Pilgrim Nuclear Power Station. The review criteria are based on several IEEE standards and the Code of Federal Regulations. The evaluation compares the submittals made by the licensee with the NRC staff positions and the review criteria and presents the reviewer's conclusion on the acceptability of the proposed system

  12. Sexuality in older adults (65+) — an overview of the recent literature, part 2: body image and sexual satisfaction

    OpenAIRE

    Træen, Bente; Carvalheira, Ana; Lundin Kvalem, Ingela; Štulhofer, Aleksandar; Janssen, Erick; Graham, Cynthia A.; Hald, Gert Martin; Enzlin, Paul

    2016-01-01

    Objectives: the aim of the paper is to provide an overview of the literature published 2005-2015 on sexual satisfaction and body image in older adults. Method: A narrative literature search using the PsycINFO database was conducted. Results: Although women in general seem less satisfied with their bodies than men, particularly in sexual contexts, older women appear to be less vulnerable to body-related dissatisfaction than younger women. Despite the age-specific dynamics of sexual satisfactio...

  13. National Profiles in Technical and Vocational Education in Asia and the Pacific: Bangladesh.

    Science.gov (United States)

    United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

    This technical and vocational education (TVE) profile on Bangladesh is one in a series of profiles of UNESCO member countries. It is intended to be a handy reference on TVE systems, staff development, technical cooperation, and information networking. An overview of the report appears first. Part I provides general information on the physical…

  14. French RSE-M and RCC-MR code appendices for flaw analysis: Presentation of the fracture parameters calculation-Part I: General overview

    International Nuclear Information System (INIS)

    Marie, S.; Chapuliot, S.; Kayser, Y.; Lacire, M.H.; Drubay, B.; Barthelet, B.; Le Delliou, P.; Rougier, V.; Naudin, C.; Gilles, P.; Triay, M.

    2007-01-01

    Two French nuclear codes include flaw assessment procedures: the RSE-M code 'Rules for In-service Inspection of Nuclear Power Plant Components' and the RCC-MR code 'Design and Construction rules for mechanical components of FBR nuclear islands and high temperature applications'. An important effort of development of these analytical methods has been made for the last 10 years in the frame of a collaboration between CEA, EDF and AREVA-NP, and in the frame of R and D actions involving CEA and IRSN. These activities have led to a unification of the common methods of the two codes. The calculation of fracture mechanics parameters, and in particular the stress intensity factor K I and the J integral, has been widely developed for industrial configurations. All developments have been integrated in the 2005 edition of RSE-M and in the 2007 edition of RCC-MR. This series of articles is composed of five parts: this first one presents an overview of the methods proposed in the RCC-MR and RSE-M codes. Parts II-IV provide compendia for specific components: plates (part II), pipes (part III) and elbows (part IV). Finally, part V presents the validation elements of the methods, with details on the process followed for their development and on evaluation of the accuracy of the proposed analytical methods. This first article of the series presents an overview of the calculation of K I and J in these two codes and describes briefly the defect assessment analyses. Specific details in the Appendix A16 of RCC-MR (LBB procedure and creep analyses) are also introduced in this article

  15. A technical and financial analysis of two recuperated, reciprocating engine driven power plants. Part 2: Financial analysis

    International Nuclear Information System (INIS)

    Orbaiz, Pedro Jose; Brear, Michael J.

    2014-01-01

    Highlights: • The financial performance of two hybrid power plants is analyzed. • Biomass and solar thermal energy are used as the renewable energy inputs. • The LCOE of both power plants is estimated using reference data. • The proposed power plants are of comparable LCOE to natural gas combined cycle. • Hybrid cycles resulted in cost-effective renewable energy generation. - Abstract: This paper is the second of a two part study that analyses the technical and financial performance of particular, recuperated engine systems. This second paper examines the financial performance of two hybrid (renewable/fossil), chemically recuperated power plants. One of these plants uses the combustion of biomass as the renewable energy input. The other assumes that solar thermal energy is used. This financial analysis estimates the so-called Levelized Cost of Electricity (LCOE) of both hybrids using reference data from several sources. Using consistent financial inputs, the LCOE of both hybrid plants is found to be comparable to the LCOE of natural gas combined cycle (NGCC) power generation. Further, the LCOE of the renewable portion of the hybrid plants’ total power output is significantly cheaper than that of all the renewable plants examined in the EPRI report, and is competitive with the fossil plants. As a result, the proposed hybrids appear to be a cost-effective form of greenhouse gas mitigation

  16. 32 CFR Appendix D to Part 286 - DD Form 2086-1, “Record of Freedom of Information (FOI) Processing Cost for Technical Data”

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false DD Form 2086-1, âRecord of Freedom of Information (FOI) Processing Cost for Technical Dataâ D Appendix D to Part 286 National Defense Department of... FREEDOM OF INFORMATION ACT PROGRAM REGULATION Pt. 286, App. D Appendix D to Part 286—DD Form 2086-1...

  17. Formative evaluation of a telemedicine model for delivering clinical neurophysiology services part I: utility, technical performance and service provider perspective.

    LENUS (Irish Health Repository)

    Breen, Patricia

    2010-01-01

    Formative evaluation is conducted in the early stages of system implementation to assess how it works in practice and to identify opportunities for improving technical and process performance. A formative evaluation of a teleneurophysiology service was conducted to examine its technical and sociological dimensions.

  18. Building a Culture of Continuous Improvement and Employee Engagement Using a Daily Management System Part 1: Overview.

    Science.gov (United States)

    Maurer, Marsha; Canacari, Elena; Eng, Kimberly; Foley, Jane; Phelan, Cynthia; Sulmonte, Kimberlyann; Wandel, Jane

    2018-03-01

    A daily management system (DMS) can be used to implement continuous quality improvement and advance employee engagement. It can empower staff to identify problems in the care environment that impact quality or workflow and to address them on a daily basis. Through DMS, improvement becomes the work of everyone, every day. The authors of this 2-part series describe their work to develop a DMS. Part 1 describes the background and organizing framework of the program.

  19. Kaiser Permanente/Sandia National health care model. Phase I prototype final report. Part 1 - model overview

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, D.; Yoshimura, A.; Butler, D.; Judson, R. [and others

    1996-11-01

    This report describes the results of a Cooperative Research and Development Agreement between Sandia National Laboratories and Kaiser Permanente Southern California to develop a prototype computer model of Kaiser Permanente`s health care delivery system. As a discrete event simulation, SimHCO models for each of 100,000 patients the progression of disease, individual resource usage, and patient choices in a competitive environment. SimHCO is implemented in the object-oriented programming language C++, stressing reusable knowledge and reusable software components. The versioned implementation of SimHCO showed that the object-oriented framework allows the program to grow in complexity in an incremental way. Furthermore, timing calculations showed that SimHCO runs in a reasonable time on typical workstations, and that a second phase model will scale proportionally and run within the system constraints of contemporary computer technology. This report is published as two documents: Model Overview and Domain Analysis. A separate Kaiser-proprietary report contains the Disease and Health Care Organization Selection Models.

  20. Quantifying reactor safety margins: Part 1: An overview of the code scaling, applicability, and uncertainty evaluation methodology

    International Nuclear Information System (INIS)

    Boyack, B.E.; Duffey, R.B.; Griffith, P.

    1988-01-01

    In August 1988, the Nuclear Regulatory Commission (NRC) approved the final version of a revised rule on the acceptance of emergency core cooling systems (ECCS) entitled ''Emergency Core Cooling System; Revisions to Acceptance Criteria.'' The revised rule states an alternate ECCS performance analysis, based on best-estimate methods, may be used to provide more realistic estimates of plant safety margins, provided the licensee quantifies the uncertainty of the estimates and included that uncertainty when comparing the calculated results with prescribed acceptance limits. To support the revised ECCS rule, the NRC and its contractors and consultants have developed and demonstrated a method called the Code Scaling, Applicability, and Uncertainty (CSAU) evaluation methodology. It is an auditable, traceable, and practical method for combining quantitative analyses and expert opinions to arrive at computed values of uncertainty. This paper provides an overview of the CSAU evaluation methodology and its application to a postulated cold-leg, large-break loss-of-coolant accident in a Westinghouse four-loop pressurized water reactor with 17 /times/ 17 fuel. The code selected for this demonstration of the CSAU methodology was TRAC-PF1/MOD1, Version 14.3. 23 refs., 5 figs., 1 tab

  1. IMPROVEMENT OF SYSTEMS OF TECHNICAL WATER SUPPLY WITH COOLING TOWERS FOR HEAT POWER PLANTS TECHNICAL AND ECONOMIC INDICATORS PERFECTION. Part 2

    Directory of Open Access Journals (Sweden)

    Yu. A. Zenovich-Leshkevich-Olpinskiy

    2016-01-01

    Full Text Available The method of calculation of economic efficiency that can be universal and is suitable for feasibility study of modernization of irrigation and water distribution system of cooling towers has been developed. The method takes into account the effect of lower pressure exhaust steam in the condenser by lowering the temperature of the cooling water outlet of a cooling tower that aims at improvement of technical and economic indicators of heat power plants. The practical results of the modernization of irrigation and water distribution system of a cooling tower are presented. As a result, the application of new irrigation and water distribution systems of cooling towers will make it possible to increase the cooling efficiency by more than 4 оС and, therefore, to obtain the fuel savings by improving the vacuum in the turbine condensers. In addition, the available capacity of CHP in the summer period is increased. The results of the work, the experience of modernization of irrigation and water distribution systems of the Gomel CHP-2 cooling towers system, as well as the and methods of calculating of its efficiency can be disseminated for upgrading similar facilities at the power plants of the Belarusian energy system. Some measures are prosed to improve recycling systems, cooling towers and their structures; such measures might significantly improve the reliability and efficiency of technical water supply systems of heat power plants.

  2. The Development of Nanotechnologies and Advanced Materials Industry in Science and Entrepreneurship: Socioeconomic and Technical Indicators. A Case Study of Latvia (Part Two)

    Science.gov (United States)

    Geipele, I.; Geipele, S.; Staube, T.; Ciemleja, G.; Zeltins, N.

    2016-10-01

    Part two of the in-depth scientific study clarifies the significant social and technical indicators of the development of nano-field at the macro, micro, and meso development levels of the economic environment in Latvia in the framework of the given theme. The analytical assessment of numerical change in socioeconomic and technical factors clearly demonstrates the interaction of nano-field with the development of science and manufacture, as found out in the study. The identified indicators are proposed to use for research, comparison and implementation in any other country of the world.

  3. The Development of Nanotechnologies and Advanced Materials Industry in Science and Entrepreneurship: Socioeconomic and Technical Indicators. A Case Study of Latvia (Part Two

    Directory of Open Access Journals (Sweden)

    Geipele I.

    2016-10-01

    Full Text Available Part two of the in-depth scientific study clarifies the significant social and technical indicators of the development of nano-field at the macro, micro, and meso development levels of the economic environment in Latvia in the framework of the given theme. The analytical assessment of numerical change in socioeconomic and technical factors clearly demonstrates the interaction of nano-field with the development of science and manufacture, as found out in the study. The identified indicators are proposed to use for research, comparison and implementation in any other country of the world.

  4. Geochemistry of Groundwater: An Overview of Sporadic Fluoride and Nitrate Contamination in Parts of Yamuna River Basin, India

    Directory of Open Access Journals (Sweden)

    Shadab Khurshid

    2013-06-01

    Full Text Available The chemical characteristics of groundwater in parts of Yamuna river sub-basin utilized for both irrigation and domestic purposes were investigated by analyzing samples collected from the western part of Yamuna basin. It is observed that majority of the ground water samples are saline due to the presence of more clayey material with low permeability leading to longer residence time. Occurrence and distribution of fluoride and nitrate in groundwater on either bank of Yamuna river are studied and high concentrations of F and NO3 exceeding standard limits of various organization were observed at places suggesting their non-solubility for drinking purposes. Low concentration of nitrate is due to denitrification. Fluoride correlates positively with HCO3 and negatively with Ca. Discharge of untreated industrial effluents in unlined drains, dumping of solid wastes in open field and increased utilization of nitrogenous and phosphate fertilizers are responsible for the degradation of groundwater quality in parts of Yamuna basin.

  5. A technical and financial analysis of two recuperated, reciprocating engine driven power plants. Part 1: Thermodynamic analysis

    International Nuclear Information System (INIS)

    Orbaiz, Pedro Jose; Brear, Michael J.

    2014-01-01

    Highlights: • A thermodynamic analysis of two recuperated ICE plants is undertaken. • The overall plant efficiency and CO 2 emissions are analysed. • Chemical recuperation without a secondary heat source is unlikely. • Using a renewable secondary heat source reduces the CO 2 emission of the plant. - Abstract: This paper is the first of a two part study that analyses the technical and financial performance of particular, recuperated engine systems. This first paper presents a thermodynamic study of two systems. The first system involves the chemical recuperation of a reciprocating, spark ignited, internal combustion engine using only the waste heat of the engine to power a steam–methane reformer. The performance of this system is evaluated for different coolant loads and steam–methane ratios. The second system is a so-called ’hybrid’ in which not only the waste heat of the engine is used, but also a secondary heat source – the combustion of biomass. The effects of the reformer’s temperature and the steam–methane ratio on the system performance are analysed. These analyses show that the potential efficiency improvement obtained when using only the engine waste heat to power the recuperation is marginal. However, results for the hybrid show that although the overall efficiency of the plant, defined in terms of the energy from both the methane and biomass, is similar to that of the conventional, methane fuelled engine, the efficiency of the conversion of the biomass fuel energy to work output appears to be higher than for other biomass fuelled technologies currently in use. Further, in the ideal limit of a fully renewable biomass fuel, the burning of biomass does not contribute to the net CO 2 emissions, and the CO 2 emission reduction for this second plant can be considerable. Indeed, its implementation on larger internal combustion engine power plants, which have efficiencies of around 45–50%, could result in CO 2 emissions that are as much as

  6. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  7. IMPROVEMENT OF SYSTEMS OF TECHNICAL WATER SUPPLY WITH COOLING TOWERS FOR STEAM POWER PLANTS TECHNICAL AND ECONOMIC INDICATORS PERFECTION. Part 1

    Directory of Open Access Journals (Sweden)

    Yu. A. Zenovich-Leshkevich-Olpinskiy

    2016-01-01

    Full Text Available In order to reduce the temperature of cooling water and increase the efficiency of use of power resources the main directions of modernization of systems of technical water supply with cooling towers at steam power plants are presented. The problems of operation of irrigation systems and water distribution systems of cooling towers are reviewed. The design of heat and mass transfer devices, their shortcomings and the impact on the cooling ability of the cooling tower are also under analysis. The use of droplet heat and mass transfer device based on the lattice polypropylene virtually eliminates the shortcomings of the film and droplet-film heat and mass transfer devices of the cooling tower, increasing lifetime, and improving the reliability and efficiency of the operation of the main equipment of thermal power plants. The design of the water distribution devices of cooling towers is also considered. It is noted that the most effective are water-spattering low-pressure nozzles made of polypropylene that provides uniform dispersion of water and are of a high reliability and durability.

  8. The PMIP4 contribution to CMIP6 – Part 1: Overview and over-arching analysis plan

    Directory of Open Access Journals (Sweden)

    M. Kageyama

    2018-03-01

    Full Text Available This paper is the first of a series of four GMD papers on the PMIP4-CMIP6 experiments. Part 2 (Otto-Bliesner et al., 2017 gives details about the two PMIP4-CMIP6 interglacial experiments, Part 3 (Jungclaus et al., 2017 about the last millennium experiment, and Part 4 (Kageyama et al., 2017 about the Last Glacial Maximum experiment. The mid-Pliocene Warm Period experiment is part of the Pliocene Model Intercomparison Project (PlioMIP – Phase 2, detailed in Haywood et al. (2016.The goal of the Paleoclimate Modelling Intercomparison Project (PMIP is to understand the response of the climate system to different climate forcings for documented climatic states very different from the present and historical climates. Through comparison with observations of the environmental impact of these climate changes, or with climate reconstructions based on physical, chemical, or biological records, PMIP also addresses the issue of how well state-of-the-art numerical models simulate climate change. Climate models are usually developed using the present and historical climates as references, but climate projections show that future climates will lie well outside these conditions. Palaeoclimates very different from these reference states therefore provide stringent tests for state-of-the-art models and a way to assess whether their sensitivity to forcings is compatible with palaeoclimatic evidence. Simulations of five different periods have been designed to address the objectives of the sixth phase of the Coupled Model Intercomparison Project (CMIP6: the millennium prior to the industrial epoch (CMIP6 name: past1000; the mid-Holocene, 6000 years ago (midHolocene; the Last Glacial Maximum, 21 000 years ago (lgm; the Last Interglacial, 127 000 years ago (lig127k; and the mid-Pliocene Warm Period, 3.2 million years ago (midPliocene-eoi400. These climatic periods are well documented by palaeoclimatic and palaeoenvironmental records, with climate and

  9. Apparent optical properties of the Canadian Beaufort Sea – Part 1: Observational overview and water column relationships

    Directory of Open Access Journals (Sweden)

    D. Antoine

    2013-07-01

    Full Text Available A data set of radiometric measurements collected in the Beaufort Sea (Canadian Arctic in August 2009 (Malina project is analyzed in order to describe apparent optical properties (AOPs in this sea, which has been subject to dramatic environmental changes for several decades. The two properties derived from the measurements are the spectral diffuse attenuation coefficient for downward irradiance, Kd, and the spectral remote sensing reflectance, Rrs. The former controls light propagation in the upper water column. The latter determines how light is backscattered out of the water and becomes eventually observable from a satellite ocean color sensor. The data set includes offshore clear waters of the Beaufort Basin as well as highly turbid waters of the Mackenzie River plumes. In the clear waters, we show Kd values that are much larger in the ultraviolet and blue parts of the spectrum than what could be anticipated considering the chlorophyll concentration. A larger contribution of absorption by colored dissolved organic matter (CDOM is responsible for these high Kd values, as compared to other oligotrophic areas. In turbid waters, attenuation reaches extremely high values, driven by high loads of particulate materials and also by a large CDOM content. In these two extreme types of waters, current satellite chlorophyll algorithms fail. This questions the role of ocean color remote sensing in the Arctic when Rrs from only the blue and green bands are used. Therefore, other parts of the spectrum (e.g., the red should be explored if one aims at quantifying interannual changes in chlorophyll in the Arctic from space. The very peculiar AOPs in the Beaufort Sea also advocate for developing specific light propagation models when attempting to predict light availability for photosynthesis at depth.

  10. Career Opportunities: Career Technical Education and the College Completion Agenda. Part III: Promising CTE Policies from across the States

    Science.gov (United States)

    Shulock, Nancy; Chisholm, Eric; Moore, Colleen; Harris, Latonya

    2012-01-01

    California's community colleges are key to resolving the shortage of educated workers that is threatening the competitive position of the state's economy. Tremendous potential for addressing this challenge resides in the system's career technical education (CTE) mission which, with appropriate structures and support, could help many more students…

  11. CO2 capture from power plants: Part I. A parametric study of the technical performance based on monoethanolamine

    NARCIS (Netherlands)

    Abu-Zahra, Mohammad R.M.; Schneiders, Léon H.J.; Niederer, John; Feron, Paul H.M.; Versteeg, Geert

    2007-01-01

    Capture and storage of CO2 from fossil fuel fired power plants is drawing increasing interest as a potential method for the control of greenhouse gas emissions. An optimization and technical parameter study for a CO2 capture process from flue gas of a 600 MWe bituminous coal fired power plant, based

  12. Polar body array CGH for prediction of the status of the corresponding oocyte. Part II: technical aspects

    NARCIS (Netherlands)

    Magli, M. Cristina; Montag, Markus; Köster, Maria; Muzi, Luigi; Geraedts, Joep; Collins, John; Goossens, Veerle; Handyside, Alan H.; Harper, Joyce; Repping, Sjoerd; Schmutzler, Andreas; Vesela, Katerina; Gianaroli, Luca

    2011-01-01

    The purpose of this study was to assess the technical aspects related to polar body (PB) biopsy, which might have an influence on the results of the microarray comparative genomic hybridization analysis. Furthermore, a comparison was made between two biopsy methods (mechanical and laser). Biopsy of

  13. Technical Vocational Education and Training for Micro-Enterprise Development in Ethiopia: A Solution or Part of the Problem?

    Science.gov (United States)

    Gondo, Tendayi; Dafuleya, Gift

    2010-01-01

    Technical vocational education and training (TVET) programmes have recently received increased attention as an area of priority for stimulating growth in developed and developing countries. This paper considers the situation in Ethiopia where the promotion of micro and small-sized enterprises (MSEs) has been central to the development and…

  14. Partners in Community Service: Making a Community Connection Is Part of "The Stafford Way" at Vermont's Stafford Technical Center

    Science.gov (United States)

    Lucci, William, Jr.

    2005-01-01

    The Stafford Technical Center (STC) in Rutland, Vermont, operates with a mission statement that proudly touts its desire to "create a learning environment that promotes pride in work, a sense of self-worth and the ability to respect others by developing effective communication and life skills." Stafford acknowledges that these learning…

  15. CO2 capture from power plants. Part I : A parametric study of the technical performance based on monoethanolamine

    NARCIS (Netherlands)

    Abu-Zahra, M. R. M.; Schneiders, L. H. J.; Niederer, J. P. M.; Feron, P. H. M.; Versteeg, G. F.

    Capture and storage of CO2 from fossil fuel fired power plants is drawing increasing interest as a potential method for the control of greenhouse gas emissions. An optimization and technical parameter study for a CO2 capture process from flue gas of a 600 MWe bituminous coal fired power plant, based

  16. Integrated process status overview

    International Nuclear Information System (INIS)

    Gertman, D.I.; Gaudio, P. Jr.

    1986-01-01

    This report summarizes findings to date with the IPSO, a large plant status overview currently under development at the OECD Halden Reactor Project. As part of a joint Halden and Combustion Engineering project, the overview is being tested in part to determine whether the large screen overview concept being entertained for use in the nuclear power plant (NPP) industry will facilitate operator performance. To this end an interactive simulation technique was used to establish a proof-of-principle test for the IPSO. Process control, operations, and human factors experts at Halden participated in the test and evaluation

  17. RETRAN overview

    International Nuclear Information System (INIS)

    Agee, L.J.

    1985-01-01

    The RETRAN code has become the industry standard with respect to NSSS transient analysis. The objective of this paper is to present an overview of important RETRAN-related events since the second International meeting in April of 1982. This paper is divided into three parts. The first part addresses the current status of the code with emphasis on the design review of RETRAN-02 MOD002 and the goal of RETRAN-02 in the Reactor Analysis Support Package (RASP). These activities are being undertaken to simplify the use of RETRAN for safety analysis and reload application which may be part of an NRC submittal. The second part of the paper describes significant applications of RETRAN. In the analysis section, special emphasis is placed on validation analyses which compare the code to actual plant data or experimental facilities. The third section briefly describes the pre-release version of RETRAN and the developmental goals for the next version of RETRAN. One major limitation of all state-of-the-art thermal-hydraulic codes is the determination of the structure of the fluid. A brief description of research needs in this are indicated

  18. Solar heating and cooling of buildings (SHACOB) commercialization report: options and strategies. Part A. Volume II. Technical report. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1977-07-15

    The national and regional perspectives for SHACOB are presented. An overview is given of the participants in SHACOB commercialization. Economic, institutional, legal, and other barriers constraining commercialization are discussed. Various analytical models are examined which project the future extent of SHACOB use or market penetration and future SHACOB to US energy supplies under alternative government policies. The results for the baseline case (no further government action, of several market penetration models are presented. Possible ways to overcome each of the barriers are presented. Qualitative analyses are given for the various incentives. Each incentive is examined to assess its impact on barriers to SHACOB commercialization and its impact on various income and interest groups. Individual incentives are compared and combined into alternative policy strategies and options. (MHR)

  19. A decade of imaging surgeons' brain function (part II): A systematic review of applications for technical and nontechnical skills assessment.

    Science.gov (United States)

    Modi, Hemel Narendra; Singh, Harsimrat; Yang, Guang-Zhong; Darzi, Ara; Leff, Daniel Richard

    2017-11-01

    Functional neuroimaging technologies enable assessment of operator brain function and can deepen our understanding of skills learning, ergonomic optima, and cognitive processes in surgeons. Although there has been a critical mass of data detailing surgeons' brain function, this literature has not been reviewed systematically. A systematic search of original neuroimaging studies assessing surgeons' brain function and published up until November 2016 was conducted using Medline, Embase, and PsycINFO databases. Twenty-seven studies fulfilled the inclusion criteria, including 3 feasibility studies, 14 studies exploring the neural correlates of technical skill acquisition, and the remainder investigating brain function in the context of intraoperative decision-making (n = 1), neurofeedback training (n = 1), robot-assisted technology (n = 5), and surgical teaching (n = 3). Early stages of learning open surgical tasks (knot-tying) are characterized by prefrontal cortical activation, which subsequently attenuates with deliberate practice. However, with complex laparoscopic skills (intracorporeal suturing), prefrontal cortical engagement requires substantial training, and attenuation occurs over a longer time course, after years of refinement. Neurofeedback and interventions that improve neural efficiency may enhance technical performance and skills learning. Imaging surgeons' brain function has identified neural signatures of expertise that might help inform objective assessment and selection processes. Interventions that improve neural efficiency may target skill-specific brain regions and augment surgical performance. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Small wind turbines - Technical sheet

    International Nuclear Information System (INIS)

    2015-02-01

    This publication first proposes an overview of the technical context of small wind turbines (from less than 1 kW to 36 kW). It discusses issues related to mast height, indicates the various technologies in terms of machine geometry (vertical or horizontal axis), of mast and foundations, of mechanism of orientation with respect to the wind. It also outlines that power curves are not always reliable due to a lack of maturity of techniques and technologies. Other issues are discussed: wind characteristics, and the assessment of the national potential source. The next parts address the regulatory and economic context, environmental impacts (limited impact on landscape, noise), propose an overview of actors and market (supply and demand of small wind turbines in the USA and in France, actors involved in the chain value in France), and give some recommendations for the development of small wind turbines in France. The last part proposes a technical focus on self-consumption by professional in rural areas (production and consumption in farms)

  1. Development of a procedure for qualitative and quantitative evaluation of human factors as a part of probabilistic safety assessments of nuclear power plants. Part B. Technical documentation

    International Nuclear Information System (INIS)

    Richei, A.

    1998-01-01

    As international studies have shown, accidents in plants are increasingly caused by combinations of technical failures and human errors. Therefore careful investigations of man-machine-interactions to determine human reliability are gaining importance worldwide. Regarding nuclear power plants such investigations are usually carried out within the scope of probabilistic safety assessments. A great number of procedures to evaluate human factors has been developed up to now. However, none of them is able to take into account the whole spectrum of requirements - as for instance transferability of date to other plants, analysis of weak points, and evaluation of cognitive tasks - for a complete and reliable probabilistic safety assessment. Based on an advanced model for a man-machine-system, the Human Error Rate Assessment and Optimizing System (HEROS) and a corresponding expert system of the same name are introduced. This expert system enables the quantification of human error probabilities for plant operator actions on the one hand and is also capable of providing quantitative statements regarding the optimization of man-machine-system in terms of human error probability minimization on the other one. Three relevant evaluation levels, i.e. 'Management Structure', 'Working Environment' and 'Man-Machine-Interface', are derived from a model of the man-machine-system. Linguistic variables are assigned to all performance shaping factors at these levels. These variables are used to establish a rule-based expert system. The knowledge bases of this system are represented by rules. Processing of these rules is carried out by means of the fuzzy set theory, after provision of relevant data for a particular personal action to be evaluated. This procedure enables a simple and effective use of ergonomic studies as the relevant database, which is also transferable to other plants with any design. The expert system consist in total of 16 rule bases in which all ascertainable and

  2. Technical and economic working domains of industrial heat pumps: Part 2 - ammonia-water hybrid absorption-compression heat pumps

    DEFF Research Database (Denmark)

    Jensen, Jonas Kjær; Ommen, Torben Schmidt; Markussen, Wiebke Brix

    2015-01-01

    The ammonia-water hybrid absorption-compression heat pump (HACHP) has been proposed as a relevant technology for industrial heat supply, especially for high sink temperatures and high temperature glides in the sink and source. This is due to the reduced vapour pressure and the non-isothermal phase...... change of the zeotropic mixture, ammonia-water. To evaluate to which extent these advantages can be translated into feasible heat pump solutions, the working domain of the HACHP is investigated based on technical and economic constraints. The HACHP working domain is compared to that of the best available...... vapour compression heat pump with natural working fluids. This shows that the HACHP increases the temperature lifts and heat supply temperatures that are feasible to produce with a heat pump. The HACHP is shown to be capable of delivering heat supply temperatures as high as 150 °C and temperature lifts...

  3. Technical and Economic Working Domains of Industrial Heat Pumps: Part 2 - Ammonia-Water Hybrid Absorption-Compression Heat Pumps

    DEFF Research Database (Denmark)

    Jensen, Jonas Kjær; Ommen, Torben Schmidt; Markussen, Wiebke Brix

    2014-01-01

    The ammonia-water hybrid absorption-compression heat pump (HACHP) is a relevant technology for industrial heat supply, especially for high sink temperatures and high temperature glides in the sink and source. This is due to the reduced vapour pressure and the non-isothermal phase change...... of the zeotropic mixture, ammonia-water. To evaluate to which extent these advantages can be translated into feasible heat pump solutions, the working domain of the HACHP is investigated based on technical and economic constraints. The HACHP working domain is compared to that of the best possible vapour...... compression heat pump with natural working fluids. This shows that the HACHP increases the temperature lifts and heat supply temperatures that are feasible to produce with a heat pump. The HACHP is shown to be capable of delivering heat supply temperatures as high as 140 XC and temperature lifts up to 60 K...

  4. Superfund TIO videos: Set B. Community relations, communicating with the media and presenting technical information. Part 9. Audio-Visual

    International Nuclear Information System (INIS)

    1990-01-01

    The videotape is divided into three sections. Section 1 discusses the Superfund Community Relations (CR) Program and its history and objectives. Community Relations requirements as defined by CERCLA for Superfund actions are outlined. Community Relations requirements, the nature of community involvement in CR plans, effective CR techniques, and the roles of the OSC, RPM, and EPA Community Relations Coordinator (CRC) are discussed. Section 2 (1) describes the media's perspective on seeking information; (2) identifies five settings and mechanisms for interacting with the media; (3) offers good media-relations techniques; and (4) lists tips for conducting media interviews. Section 3 outlines techniques for presenting technical information, describes how to be prepared to address typical issues of community concern, and identifies the four key elements in handling tough questions

  5. Evolution of Quality Assurance for Clinical Immunohistochemistry in the Era of Precision Medicine. Part 3: Technical Validation of Immunohistochemistry (IHC) Assays in Clinical IHC Laboratories.

    Science.gov (United States)

    Torlakovic, Emina E; Cheung, Carol C; D'Arrigo, Corrado; Dietel, Manfred; Francis, Glenn D; Gilks, C Blake; Hall, Jacqueline A; Hornick, Jason L; Ibrahim, Merdol; Marchetti, Antonio; Miller, Keith; van Krieken, J Han; Nielsen, Soren; Swanson, Paul E; Vyberg, Mogens; Zhou, Xiaoge; Taylor, Clive R

    2017-03-01

    Validation of immunohistochemistry (IHC) assays is a subject that is of great importance to clinical practice as well as basic research and clinical trials. When applied to clinical practice and focused on patient safety, validation of IHC assays creates objective evidence that IHC assays used for patient care are "fit-for-purpose." Validation of IHC assays needs to be properly informed by and modeled to assess the purpose of the IHC assay, which will further determine what sphere of validation is required, as well as the scope, type, and tier of technical validation. These concepts will be defined in this review, part 3 of the 4-part series "Evolution of Quality Assurance for Clinical Immunohistochemistry in the Era of Precision Medicine."

  6. Works Technical Department progress report, March 1961

    Energy Technology Data Exchange (ETDEWEB)

    None

    1961-04-19

    This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

  7. Diplomacy Through Earth Sciences: An Overview of US Geological Survey Technical Assistance Regarding the Ongoing LUSI Mud Eruption, East Java, Indonesia

    Science.gov (United States)

    Casadevall, T. J.

    2009-12-01

    In June 2007, the US Department of State (DOS) requested assistance from the USGS to provide technical guidance and advice to the US Mission in Indonesia regarding the Lumpur Sidoarjo (LUSI) mud crisis. In May 2006, LUSI began as a mud eruption from a series of mud springs adjacent to an oil and gas exploration well being drilled near Surabaya, East Java, Indonesia. The production of mud and waters from the LUSI crater area has now continued for more than 3 years with no significant change in mud production rate (~110,000 cubic meters per day) nor in temperature of the mud (70-80 degrees C). Engineers suggest that mud production will continue at these rates for years to decades to come. Regardless of future activity at LUSI, the current mud accumulation of more than 100 million cubic meters poses a physical and environmental hazard which requires continuous monitoring and observation. The first response to the 2007 DOS request involved a site visit to Indonesia in September 2007. The result of that visit was to recommend to the Government of Indonesia (GOI) that they focus on long-term management of the mud rather than focus on the controversy as to the cause of the eruption or the debate about stopping the flow. Other recommendations from the initial 2007 technical visit included contracting for a US scientist to be co-located with engineers of the Sidoarjo Mud Management Board (BPLS) in Surabaya, East Java, to advise and consult on day-to-day developments at the site of the mud eruption. A second technical team visit by USGS scientists and an engineer from the US Army Corps of Engineers in October-November 2008 made additional recommendations on the long-term management of the mud and was followed in December by the start of a 6 month contract for the US mud adviser. From the start of activity in mid-2006 through late-2008, there was a clear sense of urgency at the US Mission in Indonesia to provide guidance and advice and included the personal intervention of

  8. Flexibilization of methanization units in Germany. Overview of technical approaches, of the regulatory framework, and of the importance for the energy system - Synthesis note

    International Nuclear Information System (INIS)

    Trommler, Marcus; Dotzauer, Martin; Barchmann, Tino; Lauer, Markus; Hennig, Christiane; Mauky, Eric; Liebetrau, Jan; Thraen, Daniela; Risler, Julian

    2016-03-01

    Technologies of valorisation of biomass offer opportunities to produce a flexible and renewable energy suitable to compensate the intermittency of wind and solar energies which depend on meteorological conditions. As methanization units operated in a flexible way are now mainly present in Germany, notably due to public financial supports to flexibility, this publication describes the status of flexibilization in German methanization units, and highlights relationships with the electricity system, technical approaches to flexibility (implemented technology, gas valorisation in biomethane and injection in the natural gas network, adjustment of gas production for supply management, methanization units and hybrid concepts), and incentive policy (flexibility premium, marketing strategy). The publication finally discusses perspectives for these flexible methanization units

  9. Development of a wind converter and investigation of its operational function. Part 1: Technical description of the wind energy converter

    Science.gov (United States)

    Molly, J. P.; Steinheber, R.

    1982-11-01

    A 10 kW wind energy converter was developed by using as far possible standard serial production parts. The design criteria and the description of the essential machinery components of the MODA 10 wind energy converter are discussed. For some special load cases the safety calculation of the important components is shown. The blade control system which qualified for small wind energy converters, is explained. Weight and cost of the MODA 10 are considered.

  10. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  11. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  12. Prostatic Artery Embolization (PAE) for Symptomatic Benign Prostatic Hyperplasia (BPH): Part 2, Insights into the Technical Rationale

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Fei, E-mail: feisun@ccmijesususon.com; Crisóstomo, Verónica, E-mail: crisosto@ccmijesususon.com; Báez-Díaz, Claudia, E-mail: cbaez@ccmijesususon.com; Sánchez, Francisco M., E-mail: msanchez@ccmijesususon.com [Jesús Usón Minimally Invasive Surgery Centre (Spain)

    2016-02-15

    Rationale of prostatic artery embolization (PAE) in the treatment of symptomatic benign prostatic hyperplasia is conventionally believed to include two parts: shrinkage of the enlarged prostate gland as a result of PAE-induced ischemic infarction and potential effects to relax the increased prostatic smooth muscle tone by reducing the number and density of α{sub 1}-adrenergic receptor in the prostate stroma. This review describes new insights into the likely mechanisms behind PAE, such as ischemia-induced apoptosis, apoptosis enhanced by blockage of androgens circulation to the embolized prostate, secondary denervation following PAE, and potential effect of nitric oxide pathway immediately after embolization. Studies on therapeutic mechanisms in PAE may shed light on potentially new treatment strategies and development of novel techniques.

  13. Technical Requirements and Principles for the Standards Development of the Key Parts for Rotor Air-conditioning Compressors

    Institute of Scientific and Technical Information of China (English)

    Sun Min; Wen Yun; Fan Zhangzeng

    2011-01-01

    ntroductionSince 2000,air-conditioning sales continues to grow,and the development of air-conditioning market makes a booming market of compressor.At the present time,compressor production rising all the way,and the sales steps up the new steps constantly.Tendency chart is shown in figure 1.Rotor compressor with its simple structure,small volume,light weight,easy processed mechanical parts,reliable operation and other excellent characteristics occupied the dominant position in the market.Compared with reciprocating compressor on the same application situation,decreased in the size by 40%~50%,weight was reduced by 40%~50%.But there were also disadvantages,mainly large friction loss,friction power consumption was about 10%of compressor's total power input.

  14. Instrumentation on commercial aircraft for monitoring the atmospheric composition on a global scale: the IAGOS system, technical overview of ozone and carbon monoxide measurements

    Directory of Open Access Journals (Sweden)

    Phillipe Nédélec

    2015-06-01

    Full Text Available This article presents the In-service Aircraft of a Global Observing System (IAGOS developed for operations on commercial long-range Airbus aircraft (A330/A340 for monitoring the atmospheric composition. IAGOS is the continuation of the former Measurement of OZone and water vapour on Airbus In-service airCraft (MOZAIC programme (1994–2014 with five aircraft operated by European airlines over 20 yr. MOZAIC has provided unique scientific database used worldwide by the scientific community. In continuation of MOZAIC, IAGOS aims to equip a fleet up to 20 aircraft around the world and for operations over decades. IAGOS started in July 2011 with the first instruments installed aboard a Lufthansa A340-300, and a total of six aircraft are already in operation. We present the technical aircraft system concept, with basic instruments for O3, CO, water vapour and clouds; and optional instruments for measuring either NOy, NOx, aerosols or CO2/CH4. In this article, we focus on the O3 and CO instrumentation while other measurements are or will be described in specific papers. O3 and CO are measured by optimised but well-known methods such as UV absorption and IR correlation, respectively. We describe the data processing/validation and the data quality control for O3 and CO. Using the first two overlapping years of MOZAIC/IAGOS, we conclude that IAGOS can be considered as the continuation of MOZAIC with the same data quality of O3 and CO measurements.

  15. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 1. Geological environment of Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, the part 1 of the progress report, describes first in detail the role of geological environment in high-level radioactive wastes disposal, the features of Japanese geological environment, and programs to proceed the investigation in geological environment. The following chapter summarizes scientific basis for possible existence of stable geological environment, stable for a long period needed for the HLW disposal in Japan including such natural phenomena as volcano and faults. The results of the investigation of the characteristics of bed-rocks and groundwater are presented. These are important for multiple barrier system construction of deep geological disposal. The report furthermore describes the present status of technical and methodological progress in investigating geological environment and finally on the results of natural analog study in Tono uranium deposits area. (Ohno, S.)

  16. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  17. Electronic apex locator: A comprehensive literature review — Part II: Effect of different clinical and technical conditions on electronic apex locator′s accuracy

    Directory of Open Access Journals (Sweden)

    Hamid Razavian

    2014-01-01

    Full Text Available Introduction: To investigate the effects of different clinical and technical conditions on the accuracy of electronic apex locators (EALs. Materials and Methods: "Tooth apex," "dental instrument," "odontometry," "electronic medical," and "electronic apex locator" were searched as primary identifiers via Medline/PubMed, Cochrane library, and Scopus data base up to 30 July 2013. Original articles that fulfilled the inclusion criteria were selected and reviewed. Results: Out of 402 relevant studies, 183 were selected based on the inclusion criteria. In this part, 75 studies are presented. Pulp vitality conditions and root resorption, types of files and irrigating materials do not affect an EAL′s accuracy; however, the file size and foramen diameter can affect its accuracy. Conclusions: Various clinical conditions such as the file size and foramen diameter may affect EALs′ accuracy. However, more randomized clinical trials are needed for definitive conclusion.

  18. Availability and use of medical isotopes in Canada : performed as part of a radiological terrorism risk assessment. Technical memorandum

    International Nuclear Information System (INIS)

    Larsson, C.L.

    2004-12-01

    An assessment of the availability of radioactive material used for medical applications in Canada has been performed as part of the CBRN Research and Technology Initiative (CRTI) Project CRTI-02-0024RD (Probabilistic Risk Assessment Tool for Radiological Dispersal Devices). A general list of medical radioisotopes used worldwide was compiled via literature searches and Internet investigations. This list was then compared to all isotopes licenced to healthcare facilities in Canada. Sources of lesser concern for this study, such as noble gases, short-lived isotopes, and radioisotopes not licenced for medical applications in Canada, were eliminated. The remaining sources were then analysed for frequency of use and maximum licenced activity to assess which materials would be of highest concern in relation to radiological terrorism. A detailed description of the application, typical administered activity, and other relevant information for these most common and highest licenced activity medical sources was assembled to feed directly into the risk assessment database. A general discussion of security in healthcare facilities is also given. Due to the constant advances made in medicine, the information relating to licenced isotopes is dynamic and thus requires updating to ensure the database is kept current. (author)

  19. McKenzie River Subbasin Assessment, Technical Report 2000.

    Energy Technology Data Exchange (ETDEWEB)

    Alsea Geospatial, Inc.

    2000-02-01

    This document details the findings of the McKenzie River Subbasin Assessment team. The goal of the subbasin assessment is to provide an ecological assessment of the McKenzie River Floodplain, identification of conservation and restoration opportunities, and discussion of the influence of some upstream actions and processes. This Technical Report can be viewed in conjunction with the McKenzie River Subbasin Summary or as a stand-alone document. The purpose of the technical report is to detail the methodology and findings of the consulting team that the observations and recommendations in the summary document are based on. This part, Part I, provides an introduction to the subbasin and a general overview. Part II details the specific findings of the science team. Part III provides an explanation and examples of how to use the data that has been developed through this assessment to aid in prioritizing restoration activities. Part III also includes the literature cited and appendices.

  20. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 3. Safety assessment for geological disposal systems

    International Nuclear Information System (INIS)

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, the part 3 of the progress report, concerns safety assessment for geological disposal systems definitely introduced in part 1 and 2 of this series and consists of 9 chapters. Chapter I concerns the methodology for safety assessment while Chapter II deals with diversity and uncertainty about the scenario, the adequate model and the required data of the systems above. Chapter III summarizes the components of the geological disposal system. Chapter IV refers to the relationship between radioactive wastes and human life through groundwater, i.e. nuclide migration. In Chapter V is made a reference case which characterizes the geological environmental data using artificial barrier specifications. (Ohno. S.)

  1. Program overview

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The program overview describes the following resources and facilities; laser facilities, main laser room, target room, energy storage, laboratory area, building support systems, general plant project, and the new trailer complex

  2. Disability Overview

    Science.gov (United States)

    ... About CDC.gov . Disability & Health Home Disability Overview Disability Inclusion Barriers to Inclusion Inclusion Strategies Inclusion in Programs & Activities Resources Healthy Living Disability & Physical Activity Disability & Obesity Disability & Smoking Disability & Breast ...

  3. Vulvovaginitis - overview

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/000897.htm Vulvovaginitis - overview To use the sharing features on this page, please enable JavaScript. Vulvovaginitis or vaginitis is swelling or infection of the ...

  4. The technical ceramics (second part)

    International Nuclear Information System (INIS)

    Auclerc, S.; Poulain, E.

    2004-01-01

    This work deals with ceramics used in the nuclear and the automotive industries. Concerning the nuclear sector, ceramics are particularly used in reactors, in the treatment of radioactive wastes and for the storage of the ultimate wastes. Details are given about the different ceramics used. In the automobile sector, aluminium is principally used for its lightness and cordierite, basic material of catalyst supports is especially used in the automobile devices of cleansing. (O.M.)

  5. Treatment Option Overview (Vaginal Cancer)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) depends on the ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  6. Treatment Option Overview (Prostate Cancer)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  7. Treatment Option Overview (Anal Cancer)

    Science.gov (United States)

    ... affect the prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) depends on the ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  8. Treatment Option Overview (Esophageal Cancer)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  9. Treatment Option Overview (Childhood Rhabdomyosarcoma)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  10. Treatment Option Overview (Penile Cancer)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  11. Treatment Option Overview (Vulvar Cancer)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  12. Treatment Option Overview (Pancreatic Cancer)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  13. Treatment Option Overview (Adrenocortical Carcinoma)

    Science.gov (United States)

    ... affect the prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  14. Treatment Option Overview (Ewing Sarcoma)

    Science.gov (United States)

    ... Ewing Sarcoma Treatment Osteosarcoma Treatment Research Ewing Sarcoma Treatment (PDQ®)–Patient Version General Information About Ewing Sarcoma ... started or in another part of the body. Treatment Option Overview Key Points There are different types ...

  15. Handbook of technical diagnostics fundamentals and application to structures and systems

    CERN Document Server

    2013-01-01

    This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and r...

  16. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Part 2. Engineering technology for geological disposal

    International Nuclear Information System (INIS)

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the deep geological disposal concept for high-level radioactive wastes (HLW) in Japan. The present document, part 2 of the progress report, concerns engineering aspect with reference to Japanese geological disposal plan, according to which the vitrified HLW will be disposed of into a deep, stable rock mass with thick containers and surrounding buffer materials at the depth of several hundred meters. It discusses on multi-barrier systems consisting of a series of engineered and natural barriers that will isolate radioactive nuclides effectively and retard their migrations to the biosphere environment. Performance of repository components, including specifications of containers for vitrified HLW and their overpacks under design as well as buffer material such as Japanese bentonite to be placed in between are described referring also to such possible problems as corrosion arising from the supposed system. It also presents plans and designs for underground disposal facilities, and the presumed management of the underground facilities. (Ohno, S.)

  17. Food irradiation: economic and technical overview

    International Nuclear Information System (INIS)

    Bongirwar, D.R.

    1990-01-01

    The design and the operation of a food irradiator is a complex process. Inevitably it results in a compromise between the Cobalt-60 utilization efficiency and the desired flexibility in operating parameters and costs. It is therefore essential that the operating scenario of an irradiation facility is established in detail so that costing can result in an optimal final product. It is also clear that a given irradiation facility may not require the ultimate flexibility in processing parameters as described above. In order to generate accurate cost/Kg estimates for food irradiation applications, it is essential that each case be examined in the context of a precise scenario. This examination is best done through the collaborative efforts of the intended operator and the equipment supplier. By correlating known capital costs with known annual operating costs and estimated annual throughputs, a proper comparison of relative irradiation costs per kilogram of product can be achieved. This in turn, facilitates the choice of optimum plant design and capacity. (author). 4 refs

  18. Transplantation of the heart: An overview of 40 years' clinical and research experience at Groote Schuur Hospital and the University of Cape Town: Part II. Laboratory research experience.

    Science.gov (United States)

    Hassoulas, J

    2012-03-29

    Extensive experimental research on various aspects of heart transplantation was undertaken during the first 2 decades. An overview of this work is presented, and some still unpublished work has been included. Experimental laboratory investigation was an integral activity of the cardiac transplantation programme at the University of Cape Town over these years, and has remained so ever since. These studies provided invaluable fundamental information upon which future clinical work was based. It is therefore necessary to briefly mention and discuss this information, most of which has been published in detail by the various investigators concerned.

  19. Head Start Impact Study. Technical Report

    Science.gov (United States)

    Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

    2010-01-01

    This Technical Report is designed to provide technical detail to support the analysis and findings presented in the "Head Start Impact Study Final Report" (U.S. Department of Health and Human Services, January 2010). Chapter 1 provides an overview of the Head Start Impact Study and its findings. Chapter 2 provides technical information on the…

  20. Pacific Northwest Laboratory annual report for 1984 to the DOE Office of the Assistant Secretary for Policy, Safety, and Environment. Part 5. Overview and assessment

    International Nuclear Information System (INIS)

    Bair, W.J.

    1985-02-01

    Research conducted in 1984 is briefly described. Research areas include: (1) uncertainties in modeling source/receptor relations for acidic deposition; (2) health physics support and assistance to the DOE; (3) technical guidelines for radiological calibrations; (4) personnel neutron dosemeter evaluation and upgrade program; (5) beta measurement evaluation and upgrade; (6) accreditation program for occupational exposure measurements; (7) assurance program for Remedial Action; (8) environmental protection support and assistance; (9) hazardus waste risk assessment; and (10) radiation policy studies

  1. Concept Overview & Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, Mark

    2017-07-12

    'H2@Scale' is an opportunity for wide-scale use of hydrogen as an intermediate that carries energy from various production options to multiple uses. It is based on identifying and developing opportunities for low-cost hydrogen production and investigating opportunities for using that hydrogen across the electricity, industrial, and transportation sectors. One of the key production opportunities is use of low-cost electricity that may be generated under high penetrations of variable renewable generators such as wind and solar photovoltaics. The technical potential demand for hydrogen across the sectors is 60 million metric tons per year. The U.S. has sufficient domestic renewable resources so that each could meet that demand and could readily meet the demand using a portfolio of generation options. This presentation provides an overview of the concept and the technical potential demand and resources. It also motivates analysis and research on H2@Scale.

  2. Modelling Overview

    DEFF Research Database (Denmark)

    Larsen, Lars Bjørn; Vesterager, Johan

    This report provides an overview of the existing models of global manufacturing, describes the required modelling views and associated methods and identifies tools, which can provide support for this modelling activity.The model adopted for global manufacturing is that of an extended enterprise s...

  3. Introductory Overviews

    NARCIS (Netherlands)

    Jakeman, A.J.; Hamilton, S.H.; Athanasiadis, I.N.; Pierce, S.A.

    2015-01-01

    Introductory Overview articles are designed to provide introductory level background to key themes and topics that caters to the eclectic readership of EMS. It is envisaged that these articles will help to break down barriers to shared understanding and dialogue within multidisciplinary teams, and

  4. Conference overview

    Indian Academy of Sciences (India)

    It had 17 plenary talks and as a new feature it also had 8 short talks which ..... absence of black holes, long-term simulations are possible and quantitative .... [3] For a brief overview, see The Nag Memorial Lecture by Ashoke Sen at the Inst-.

  5. A multi-channel bioluminescent bacterial biosensor for the on-line detection of metals and toxicity. Part II: technical development and proof of concept of the biosensor

    Energy Technology Data Exchange (ETDEWEB)

    Charrier, Thomas; Thouand, Gerald [UMR CNRS 6144 GEPEA, CBAC, Nantes University, PRES UNAM, Campus de la Courtaisiere-IUT, La Roche-sur-Yon cedex (France); Chapeau, Cyrille [Biolumine, Biokar Diagnostic, Rue des Quarante Mines ZAC de Ther-Allonne, Beauvais Cedex (France); Bendria, Loubna; Daniel, Philippe [UMR CNRS 6087 LPEC, Universite du Maine, Av Olivier Messiaen, Le Mans cedex 9 (France); Picart, Pascal [UMR CNRS 6613 IAM-LAUM, Ecole Nationale des Ingenieurs du Mans, Universite du Maine, Le Mans Cedex 9 (France)

    2011-05-15

    This research study deals with the on-line detection of heavy metals and toxicity within the context of environmental pollution monitoring. It describes the construction and the proof of concept of a multi-channel bioluminescent bacterial biosensor in immobilized phase: Lumisens3. This new versatile device, designed for the non-stop analysis of water pollution, enables the insertion of any bioluminescent strains (inducible or constitutive), immobilized in a multi-well removable card. The technical design of Lumisens3 has benefited from both a classical and a robust approach and includes four main parts: (1) a dedicated removable card contains 64 wells, 3 mm in depth, arranged in eight grooves within which bacteria are immobilized, (2) this card is incubated on a Pelletier block with a CCD cooled camera on top for bioluminescence monitoring, (3) a fluidic network feeds the card with the sample to be analyzed and finally (4) a dedicated computer interface, BIOLUX 1.0, controls all the elements of the biosensor, allowing it to operate autonomously. The proof of concept of this biosensor was performed using a set of four bioluminescent bacteria (Escherichia coli DH1 pBzntlux, pBarslux, pBcoplux, and E. coli XL1 pBfiluxCDABE) in the on-line detection of CdCl{sub 2} 0.5 {mu}M and As{sub 2}O{sub 3} 5 {mu}M from an influent. When considering metals individually, the ''fingerprints'' from the biosensor were as expected. However, when metals were mixed together, cross reaction and synergistic effects were detected. This biosensor allowed us to demonstrate the simultaneous on-line cross detection of one or several heavy metals as well as the measurement of the overall toxicity of the sample. (orig.)

  6. Environmental taxation. An overview

    International Nuclear Information System (INIS)

    Marcus, Vincent; Duboucher, Peggy; Ben Maid, Atika; Devaux, Jeremy; Nicklaus, Doris; Calvet, Melanie; Poupard, Christophe; Pourquier, Francois-Xavier; Vicard, Augustin; Monnoyer-Smith, Laurence

    2017-01-01

    This official publication proposes a detailed overview of the situation of environmental taxation in France. It first gives a general overview by discussing some key figures, by recalling the chronology of the main environmental taxation arrangements, and by discussing lessons learned from French and foreign experiments for an efficient, acceptable and consistent taxation. The second part proposes a detailed presentation of environmental taxation by distinguishing its main themes and objectives: struggle against climate change, reduction of air pollution and water pollution, and wastes, preservations and development of resources from biodiversity (soil artificialization, sustainable management of fauna and flora), efficient use of non renewable resources and of water (water resources, energetic and mineral raw materials). For each of these themes, the report presents the environmental problematic, and the existing arrangements, and proposes some elements of international comparison. The last part proposes a list of all environmental taxes

  7. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  8. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  9. Brazilian energy overview

    International Nuclear Information System (INIS)

    Souza, J.A.M. de.

    1975-01-01

    The Brazilian energy overview compared with the rest of the world is presented, as well as the current situation and prospects for the future. In a first part, the evalution from the past through the present time is considered, and in a second part, attention is given on the future prospects for Brazil and the different countries in connection with the energy field. It is expected that the current per capita energy consumption in Brazil, in all of its various forms, now totalling 6 million kcal/inh, will reach at least 22 million kcal/inh toward the end of this century

  10. Psychological Care, Patient Education, Orthotics, Ergonomics and Prevention Strategies for Neck Pain: An Systematic Overview Update as Part of the ICON§ Project

    Science.gov (United States)

    Gross, Anita R.; Kaplan, Faith; Huang, Stacey; Khan, Mahweesh; Santaguida, P. Lina; Carlesso, Lisa C.; MacDermid, Joy C.; Walton, David M.; Kenardy, Justin; Söderlund, Anne; Verhagen, Arianne; Hartvigsen, Jan

    2013-01-01

    Objectives: To conduct an overview on psychological interventions, orthoses, patient education, ergonomics, and 1⁰/2⁰ neck pain prevention for adults with acute-chronic neck pain. Search Strategy: Computerized databases and grey literature were searched (2006-2012). Selection Criteria: Systematic reviews of randomized controlled trials (RCTs) on pain, function/disability, global perceived effect, quality-of-life and patient satisfaction were retrieved. Data Collection & Analysis: Two independent authors selected articles, assessed risk of bias using AMSTAR tool and extracted data. The GRADE tool was used to evaluate the body of evidence and an external panel to provide critical review. Main Results: We retrieved 30 reviews (5-9 AMSTAR score) reporting on 75 RCTs with the following moderate GRADE evidence. For acute whiplash associated disorder (WAD), an education video in emergency rooms (1RCT, 405participants] favoured pain reduction at long-term follow-up thus helping 1 in 23 people [Standard Mean Difference: -0.44(95%CI: -0.66 to -0.23)). Use of a soft collar (2RCTs, 1278participants) was not beneficial in the long-term. For chronic neck pain, a mind-body intervention (2RCTs, 1 meta-analysis, 191participants) improved short-term pain/function in 1 of 4 or 6 participants. In workers, 2-minutes of daily scapula-thoracic endurance training (1RCT, 127participants) over 10 weeks was beneficial in 1 of 4 participants. A number of psychosocial interventions, workplace interventions, collar use and self-management educational strategies were not beneficial. Reviewers' Conclusions: Moderate evidence exists for quantifying beneficial and non-beneficial effects of a limited number of interventions for acute WAD and chronic neck pain. Larger trials with more rigorous controls need to target promising interventions PMID:24133554

  11. Abuse of Law in European Tax Law: An Overview and Some Recent Trends in the Direct and Indirect Tax Case Law of the ECJ - part 1

    NARCIS (Netherlands)

    Weber, D.

    2013-01-01

    This article examines the right of Member States to combat abuse, as defined in ECJ case law, in particular, the balance between enforcement of the principle of legal certainty, the right to choose the most favourable fiscal route and the right of states to combat tax avoidance. Part 1 addresses the

  12. Abuse of Law in European Tax Law: An Overview and Some Recent Trends in the Direct and Indirect Tax Case Law of the ECJ - part 2

    NARCIS (Netherlands)

    Weber, D.

    2013-01-01

    This article examines the right of Member States to combat abuse, as defined in ECJ case law, in particular, the balance between enforcement of the principle of legal certainty, the right to choose the most favourable fiscal route and the right of states to combat tax avoidance. Part 1, which was

  13. [25 years after re-unification of Germany: An overview on Eastern German psychiatry. Part 2: Pluralistic approaches and the collapse in the 1980s].

    Science.gov (United States)

    Steinberg, H

    2016-05-01

    This is the second part of a 2-part study of the history of psychiatry in East Germany, i. e. the Soviet Occupied Zone and later German Democratic Republic. This part primarily covers the 1970 s and 1980 s. Starting from the 1970 s, pluralistic views on and approaches to mental illness and its treatment gained ground, which was especially visible in psychotherapy. The exacerbating economic crisis of the 1970 s and 1980 s led to a steadily worsening collapse of the building infrastructure of clinics and any reformation that would have led to significant financial investment became impossible. Despite attempts from party and state, psychiatric institutions successfully resisted being systematically misused against their patients.In the discussion part, the study supports the notion that East German psychiatry was neither totally isolated nor communist in nature. Even though communism had an influence, it did not have a decisively modifying impact on psychiatry, so that one can characterize psychiatry in East Germany as a medical discipline with a certain specific typology. © Georg Thieme Verlag KG Stuttgart · New York.

  14. SEI Overview

    Science.gov (United States)

    2012-06-11

    SOA DoD NextGen Chief Architect Support FAB-T, PMAG and EELV study GPS III satellite and OCX N-CSDS Global Hawk GSRA and UCS ORS SAF/A6...Workshop ATAM QAW eLearning Pilots Technical Assessments QUASAR Mission Success in Complex Environments Line-Funded Exploratory New Starts (LENS

  15. Overview of SSC accelerator requirements

    International Nuclear Information System (INIS)

    Dugan, G.

    1992-03-01

    This paper will present a general overview of the requirements of the Superconducting Super Collider (SSC) accelerators. Each accelerator in the injector chain will be discussed separately, followed by a discussion of the collider itself. In conclusion, the top level requirements of the overall accelerator system will be presented. For each accelerator, the primary operating parameters will be presented in tabular form. A brief narrative discussion of the principal technical features of each machine will be given. Finally, the principal technical design challenges for the machine will be noted, together with the currently planned solution to these challenges

  16. The Ferris Educational Mission: A Continuing Study by the Ferris Educational Planning Committee, Part II: Continuing Education.

    Science.gov (United States)

    Ferris State Coll., Big Rapids, MI.

    This document, the second of a two-part study, focuses on the area of continuing and adult education at Ferris State College (FSC), Michigan. An overview of the status of adult and continuing education and recommendations are provided by the schools of allied health, business, general education, education, pharmacy, technical and applied arts, and…

  17. Technical framework for groundwater restoration

    International Nuclear Information System (INIS)

    1991-04-01

    This document provides the technical framework for groundwater restoration under Phase II of the Uranium Mill Tailings Remedial Action (UMTRA) Project. A preliminary management plan for Phase II has been set forth in a companion document titled ''Preplanning Guidance Document for Groundwater Restoration''. General principles of site characterization for groundwater restoration, restoration methods, and treatment are discussed in this document to provide an overview of standard technical approaches to groundwater restoration

  18. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  19. Towards common technical standards

    International Nuclear Information System (INIS)

    Rahmat, H.; Suardi, A.R.

    1993-01-01

    In 1989, PETRONAS launched its Total Quality Management (TQM) program. In the same year the decision was taken by the PETRONAS Management to introduce common technical standards group wide. These standards apply to the design, construction, operation and maintenance of all PETRONAS installations in the upstream, downstream and petrochemical sectors. The introduction of common company standards is seen as part of an overall technical management system, which is an integral part of Total Quality Management. The Engineering and Safety Unit in the PETRONAS Central Office in Kuala Lumpur has been charged with the task of putting in place a set of technical standards throughout PETRONAS and its operating units

  20. Pacific Northwest Laboratory annual report for 1983 to the DOE Office of the Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness. Part 5. Overview and assessment

    International Nuclear Information System (INIS)

    Bair, W.J.

    1984-02-01

    The 1983 annual report from Pacific Northwest Laboratory (PNL) to the Department of Energy (DOE) describes research in environment, health, and safety conducted during fiscal year 1983. The report again consists of five parts, each in a separate volume. Part 5 of the 1983 Annual Report to the Department of Energy's Assistant Secretary for Environmental Protection, Safety and Emergency Preparedness presents Pacific Northwest Laboratory's progress on work performed for the Office of Nuclear Safety and the Office of Operational Safety. For each project, as identified by the Field Task Proposal/Agreement, articles describe progress made during FY 1983. Authors of these articles represent a broad spectrum of capabilities derived from various segments of the Laboratory, reflecting the interdisciplinary nature of the work

  1. Technical presentation

    CERN Document Server

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  2. Abuse of law in European tax law: an overview and some recent trends in the direct and indirect tax case law of the ECJ — part 2

    OpenAIRE

    Weber, Dennis

    2013-01-01

    This paper examines the right of the EU Member States to combat abuse, as defined in the case law of the European Court, in particular, the balance between enforcement of the principle of legal certainty, the right to choose the most favourable fiscal route and the right of states to combat tax avoidance. Part 2 analyses, inter alia, how specific an anti-abuse provisions should be, the burden of proof, tax jurisdiction shopping and the consequences of abuse

  3. Air quality and climate change, Topic 3 of the Model Inter-Comparison Study for Asia Phase III (MICS-Asia III) - Part 1: Overview and model evaluation

    Science.gov (United States)

    Gao, Meng; Han, Zhiwei; Liu, Zirui; Li, Meng; Xin, Jinyuan; Tao, Zhining; Li, Jiawei; Kang, Jeong-Eon; Huang, Kan; Dong, Xinyi; Zhuang, Bingliang; Li, Shu; Ge, Baozhu; Wu, Qizhong; Cheng, Yafang; Wang, Yuesi; Lee, Hyo-Jung; Kim, Cheol-Hee; Fu, Joshua S.; Wang, Tijian; Chin, Mian; Woo, Jung-Hun; Zhang, Qiang; Wang, Zifa; Carmichael, Gregory R.

    2018-04-01

    Topic 3 of the Model Inter-Comparison Study for Asia (MICS-Asia) Phase III examines how online coupled air quality models perform in simulating high aerosol pollution in the North China Plain region during wintertime haze events and evaluates the importance of aerosol radiative and microphysical feedbacks. A comprehensive overview of the MICS-Asia III Topic 3 study design, including descriptions of participating models and model inputs, the experimental designs, and results of model evaluation, are presented. Six modeling groups from China, Korea and the United States submitted results from seven applications of online coupled chemistry-meteorology models. Results are compared to meteorology and air quality measurements, including data from the Campaign on Atmospheric Aerosol Research Network of China (CARE-China) and the Acid Deposition Monitoring Network in East Asia (EANET). The correlation coefficients between the multi-model ensemble mean and the CARE-China observed near-surface air pollutants range from 0.51 to 0.94 (0.51 for ozone and 0.94 for PM2.5) for January 2010. However, large discrepancies exist between simulated aerosol chemical compositions from different models. The coefficient of variation (SD divided by the mean) can reach above 1.3 for sulfate in Beijing and above 1.6 for nitrate and organic aerosols in coastal regions, indicating that these compositions are less consistent from different models. During clean periods, simulated aerosol optical depths (AODs) from different models are similar, but peak values differ during severe haze events, which can be explained by the differences in simulated inorganic aerosol concentrations and the hygroscopic growth efficiency (affected by varied relative humidity). These differences in composition and AOD suggest that future models can be improved by including new heterogeneous or aqueous pathways for sulfate and nitrate formation under hazy conditions, a secondary organic aerosol (SOA) formation chemical

  4. PHOBOS Overview

    Science.gov (United States)

    Hofman, David J.; Phobos Collaboration; Bbback; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Chai, Z.; Decowski, M. P.; García, E.; Gburek, T.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Hauer, M.; Heintzelman, G. A.; Henderson, C.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Khan, N.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Reed, C.; Roland, C.; Roland, G.; Sagerer, J.; Seals, H.; Sedykh, I.; Smith, C. E.; Stankiewicz, M. A.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tonjes, M. B.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Vaurynovich, S. S.; Verdier, R.; Veres, G. I.; Wenger, E.; Wolfs, F. L. H.; Wosiek, B.; Kwoźniak; Wysłouch, B.

    2006-11-01

    A brief overview of the current results and conclusions from the PHOBOS experiment at the Relativistic Heavy Ion Collider (RHIC) is given. No evidence is found for non-monotonic behavior of observables measured by PHOBOS in the RHIC energy region. Convincing evidence is found that we have created a state of matter with high energy-density, that is nearly net-baryon free and is strongly interacting. The data are found to exhibit "simple" scaling behaviors, which include extended longitudinal scaling and scaling with the number of participating nucleons. The Au+Au collision charged particle data also exhibit a remarkable factorization of collision energy and geometry.

  5. An Overview of Residential Ventilation Activities in the Building America Program (Phase I)

    Energy Technology Data Exchange (ETDEWEB)

    Barley, D.

    2001-05-21

    This report provides an overview of issues involved in residential ventilation; provides an overview of the various ventilation strategies being evaluated by the five teams, or consortia, currently involved in the Building America Program; and identifies unresolved technical issues.

  6. Technical writing versus technical writing

    Science.gov (United States)

    Dillingham, J. W.

    1981-01-01

    Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

  7. Experimental overview

    International Nuclear Information System (INIS)

    Nagamiya, Shoji

    1992-01-01

    Five years ago the first heavy-ion beams were accelerated at both the BNL-AGS and the CERN-SPS. This conference is the 5th anniversary in the experimental field. Currently, four experimental groups (E802/E859, E810, E814, E858) are taking data at BNL and eight groups (NA34-3, NA44, NA45, NA35, NA36, NA38, WA80/WA93, WA85) at CERN. Au and Pb beams are about to come, and a lot of activities are going on for RHIC and LHC. The purpose of this talk is to overview where we are, in particular, by looking at the past data. In this talk, the data of proton rapidity distributions are reviewed first to study nuclear transparency, then, the data of energy spectra and slopes, HBT and anti d production are discussed in connection with the evolution of the collision. Third, the data of strangeness production are described. Finally, the status of J/ψ and that of soft photons and electron pairs are briefly overviewed. (orig.)

  8. ITER overview

    International Nuclear Information System (INIS)

    Shimomura, Y.; Aymar, R.; Chuyanov, V.; Huguet, M.; Parker, R.R.

    2001-01-01

    This report summarizes technical works of six years done by the ITER Joint Central Team and Home Teams under terms of Agreement of the ITER Engineering Design Activities. The major products are as follows: complete and detailed engineering design with supporting assessments, industrial-based cost estimates and schedule, non-site specific comprehensive safety and environmental assessment, and technology R and D to validate and qualify design including proof of technologies and industrial manufacture and testing of full size or scalable models of key components. The ITER design is at an advanced stage of maturity and contains sufficient technical information for a construction decision. The operation of ITER will demonstrate the availability of a new energy source, fusion. (author)

  9. ITER Overview

    International Nuclear Information System (INIS)

    Shimomura, Y.; Aymar, R.; Chuyanov, V.; Huguet, M.; Parker, R.

    1999-01-01

    This report summarizes technical works of six years done by the ITER Joint Central Team and Home Teams under terms of Agreement of the ITER Engineering Design Activities. The major products are as follows: complete and detailed engineering design with supporting assessments, industrial-based cost estimates and schedule, non-site specific comprehensive safety and environmental assessment, and technology R and D to validate and qualify design including proof of technologies and industrial manufacture and testing of full size or scalable models of key components. The ITER design is at an advanced stage of maturity and contains sufficient technical information for a construction decision. The operation of ITER will demonstrate the availability of a new energy source, fusion. (author)

  10. Overview of major hazards. Part 2: Source term; dispersion; combustion; blast, missiles, venting; fire; radiation; runaway reactions; toxic substances; dust explosions

    Science.gov (United States)

    Vilain, J.

    Approaches to major hazard assessment and prediction are reviewed. Source term: (phenomenology/modeling of release, influence on early stages of dispersion); dispersion (atmospheric advection, diffusion and deposition, emphasis on dense/cold gases); combustion (flammable clouds and mists covering flash fires, deflagration, transition to detonation; mostly unconfined/partly confined situations); blast formation, propagation, interaction with structures; catastrophic fires (pool fires, torches and fireballs; highly reactive substances) runaway reactions; features of more general interest; toxic substances, excluding toxicology; and dust explosions (phenomenology and protective measures) are discussed.

  11. Mission Plan for the Civilian Radioactive Waste Management Program. Volume I. Part I. Overview and current program plans; Part II. Information required by the Nuclear Waste Policy Act of 1982

    International Nuclear Information System (INIS)

    1985-06-01

    The Misson Plan is divided into two parts. Part I describes the overall goals, objectives, and strategy for the disposal of spent nuclear fuel and high-level waste. It explains that, to meet the directives of the Nuclear Waste Policy Act, the DOE intends to site, design, construct, and start operating a mined geologic repository by January 31, 1998. The Act specifies that the costs of these activities will be borne by the owners and generators of the waste received at the repository. Part I further describes the other components of the waste-management program - monitored retrievable storage, Federal interim storage, and transportation - as well as systems integration activities. Also discussed are institutional plans and activities as well as the program-management system being implemented by the Office of Civilian Radioactive Waste Management. Part II of the Mission Plan presents the detailed information required by Section 301(a) of the Act - key issues and information needs; plans for obtaining the necessary information; potential financial, institutional, and legal issues; plans for the test and evaluation facility; the principal results obtained to date from site investigations; information on the site-characterization programs; information on the waste package; schedules; costs; and socioeconomic impacts. In accordance with Section 301(a) of the Act, Part II is concerned primarily with the repository program

  12. An overview of recent progress using low-cost and cost-effective composite materials and processes to produce SSC magnet coils and associated non-metallic parts

    International Nuclear Information System (INIS)

    Morena, J.

    1992-01-01

    Thermoplastic and thermoset polymer systems have been used in high-energy physics applications throughout the world for many years. Like other industries and industrial communities, the materials and processes requirements of these polymers have recently taken on new meanings. New accelerators and other machines are pushing all material parameters beyond limits. New polymeric and composite materials are being developed, invented, and formulated, as is new process and application equipment. This is a decade of change. Composite materials are being chosen for performance characteristics and cost-effective processing as well. The information that follows will note some of the recent progress in the development of composite materials and processes for producing low-cost and cost-effective, high-quality, non-metallic composite components for use in SSC magnets and in other accelerators. The materials and methods for making composite molds, tools, and structural parts for magnet coils and other components are demonstrated. New, unique, and innovative approaches for processing thermoset polymers are presented. The formulated polymer systems are used to form semi and structural insulators, spacers, supports, coil end parts, blocks, housings, adhesives, and other composite applications

  13. A Conceptual Approach to Assimilating Remote Sensing Data to Improve Soil Moisture Profile Estimates in a Surface Flux/Hydrology Model. Part 1; Overview

    Science.gov (United States)

    Crosson, William L.; Laymon, Charles A.; Inguva, Ramarao; Schamschula, Marius; Caulfield, John

    1998-01-01

    ' soil moisture under such conditions and even more difficult to apply such a value. Because of the non-linear relationships between near-surface soil moisture and other variables of interest, such as surface energy fluxes and runoff, mean soil moisture has little applicability at such large scales. It is for these reasons that the use of remote sensing in conjunction with a hydrologic model appears to be of benefit in capturing the complete spatial and temporal structure of soil moisture. This paper is Part I of a four-part series describing a method for intermittently assimilating remotely-sensed soil moisture information to improve performance of a distributed land surface hydrology model. The method, summarized in section II, involves the following components, each of which is detailed in the indicated section of the paper or subsequent papers in this series: Forward radiative transfer model methods (section II and Part IV); Use of a Kalman filter to assimilate remotely-sensed soil moisture estimates with the model profile (section II and Part IV); Application of a soil hydrology model to capture the continuous evolution of the soil moisture profile within and below the root zone (section III); Statistical aggregation techniques (section IV and Part II); Disaggregation techniques using a neural network approach (section IV and Part III); and Maximum likelihood and Bayesian algorithms for inversely solving for the soil moisture profile in the upper few cm (Part IV).

  14. Conference on the Trend in Income Inequality in the U.S. Part I, Trends in Inequality of Well-Offness in the United States since World War II. Part 2, Conference Overview: Conceptual Issues, Data Issues, and Policy Implications

    Science.gov (United States)

    Taussig, Michael K.; Danziger, Sheldon

    The first part of this document summarizes the current state of knowledge on trends in inequality of economic well-being in the United States since World War II. It surveys alternative answers to the often asked question: Has inequality in the U.S. increased, decreased, or remained roughly the same over a period of time? Intelligent laymen, and…

  15. 50 CFR Appendix A to Part 679 - Performance and Technical Requirements for Scales Used To Weigh Catch at Sea in the Groundfish...

    Science.gov (United States)

    2010-10-01

    ... Load (Lot) 3.2.4Influence Quantities 3.2.4.1Temperature 3.2.4.1.1Operating Temperature 3.2.4.2Power... 4.2.1.2Increasing and Decreasing Load and Shift Tests 4.2.2Accuracy Classes 4.2.3Minimum Load 4.2.4Influence Quantities 4.2.4.1Temperature 4.2.4.1.1Operating Temperature 4.2.4.2Power Supply 4.3Technical...

  16. A shuttle and space station manipulator system for assembly, docking, maintenance, cargo handling and spacecraft retrieval (preliminary design). Volume 3: Concept analysis. Part 1: Technical

    Science.gov (United States)

    1972-01-01

    Information backing up the key features of the manipulator system concept and detailed technical information on the subsystems are presented. Space station assembly and shuttle cargo handling tasks are emphasized in the concept analysis because they involve shuttle berthing, transferring the manipulator boom between shuttle and station, station assembly, and cargo handling. Emphasis is also placed on maximizing commonality in the system areas of manipulator booms, general purpose end effectors, control and display, data processing, telemetry, dedicated computers, and control station design.

  17. Technical reliability of geological disposal for high-level radioactive wastes in Japan. The second progress report. Introductory part and summaries

    International Nuclear Information System (INIS)

    1999-11-01

    Based on the Advisory Committee Report on Nuclear Fuel Cycle Backend Policy submitted to the Japanese Government in 1997, JNC documents the progress of research and development program in the form of the second progress report (the first one published in 1992). It summarizes an evaluation of the technical reliability and safety of the geological disposal concept for high-level radioactive wastes (HLW) in Japan and comprises seven chapters. Chapter I briefly describes the importance of HLW management in promoting nuclear energy utilization. According to the long-term program, the HLW separated from spent fuels at reprocessing plants is to be vitrified and stored for a period of 30 to 50 years to allow cooling, then be disposed of in a deep geological formation. Chapter II mainly explains the concepts of geological disposal in Japan. Chapters III to V are devoted to discussions on three important technical elements (the geological environment of Japan, engineering technology and safety assessment of the geological disposal system) which are necessary for reliable realization of the geological disposal concept. Chapter VI demonstrates the technical ground for site selection and for setup of safety standards of the disposal. Chapter VII summarizes together with plans for future research and development. (Ohno, S.)

  18. The Methodological Foundations of the Economic Evaluation of the Level of Intensification of the Innovative Processes at Industrial Enterprise in the Part of Technical-Technological Subsystem

    Directory of Open Access Journals (Sweden)

    Plakhotnik Olena О.

    2017-04-01

    Full Text Available Regularities of technocratic changes define the change of technological methods of production and technological modes at the level of the stages of development of a production enterprise. An important role occupies the commercialization of technical-technological innovation. The article allocates the directions of impact on commodity markets and the production enterprises, which are operating there. It is using the exclusive rights tool will meet the challenges of changes in the structure of the national economy so as to increase the level of its competitiveness on the world market. The article proposes the improved methodological approach to forming a system of analytical indicators for evaluating the economic efficiency of the level of intensification of the technical-technological innovation processes at industrial enterprise, based on reasonable conditions and factors of innovation development of industrial enterprise, models of quantitative measuring the efficiency of innovative projects. Applying this approach would improve the efficiency of use of the technical-technological innovations of the industrial enterprises, having increased the profitability of intellectual activity.

  19. Engineering Technical Review Planning Briefing

    Science.gov (United States)

    Gardner, Terrie

    2012-01-01

    The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

  20. TC overview

    CERN Multimedia

    Nessi, M

    In line with the decision taken by the September Collaboration Board, we started the process of reorganizing the technical co-ordination (TCn). The detector construction project has been subdivided into 8 activities, each one managed by an activity manager (AM). For some activities the mandate of TCn is to monitor the progress of the work, for other tasks the construction responsibility is direct. AMs, system and subsystem Project Leaders and Project engineers form a new technical management structure (TMB), which deals with the day-by-day problems. The TMB meets the day before the Executive Board (EB), takes decisions and reports to the EB for major changes. This new operation mode has been in place for 4 months and seems to work. In the last few months a big effort was made to re-baseline the various schedules and the detector parameters. Since March we have a new LHC schedule, which targets the start of the machine commissioning at the end of 2005. By that time the initial detector configuration must be i...

  1. Advanced technologies and new roles for VTOL aircraft (Part 2/2)

    Energy Technology Data Exchange (ETDEWEB)

    Renaud, J.P. [Office National d' Etudes et de Recherches Aerospatiales (ONERA-University), 13 - Marseilles (France)

    2000-06-01

    This survey paper intends to overview some main technical evolutions impacting present and future general design of rotor-craft (for vehicles, engines and systems), including helicopter and future tilt-rotor. These trends tend to achieve a better adaptation to a wide range of mission requirements with an economic aircraft optimisation and an enhanced safety level and environmental impact. Whilst part I considered the whole rotor-craft technical activity the present part II is essentially focused on market issues and the tilt-rotor concept introduction. (author)

  2. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  3. How to be an Effective Technical Writer?

    OpenAIRE

    M Solaiman Ali; Dheya Al-Othmany

    2012-01-01

    Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations). Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical w...

  4. Evaluation and capacity building to improve precollege science and mathematics achievement in the US: 10 CFR, Part 605. Technical progress report, June--December 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    The National Center for Improving Science Education has undertaken activities to achieve evaluation goals for DOE`s Precollege programs: develop means to determine program quality; develop means for determining the contribution of DOE precollege programs to both teacher enhancement and student achievement; provide evaluation designs and instruments and reports of program quality and impact; and strengthen both DOE`s and the Labs` capacity to do both short- and long-term planning as well as deliver effective programs and evaluation. Appendices include evaluation/technical assistance report, profiling teacher research participation and teacher development programs, teacher surveys, impact assessment design, and teacher research participation programs anecdotes for 8 labs.

  5. DOE Solar Energy Technologies Program: Overview and Highlights

    Energy Technology Data Exchange (ETDEWEB)

    2006-05-01

    A non-technical overview of the U.S. Department of Energy's Solar Energy Technologies Program, including sections on photovoltaics (PV), concentrating solar power, and solar heating and lighting R&D.

  6. GLOBAL 2009: Closing speech - the bulk of technical sessions

    International Nuclear Information System (INIS)

    Greneche, D.

    2009-01-01

    The author proposes an overview of the content of the hundred technical sessions of the GLOBAL 2009 conference. Thus, he addresses the twelve main issues: the upstream part of the fuel cycle, the present status of used fuel recycling, the waste management strategies and technologies, the transportation and storage of used fuels and radioactive materials, the definitive storage of nuclear wastes, the new technologies for fuel recycling, advanced designs of reactor cores and fuel management, long life radionuclide transmutation systems, the non proliferation issue, material management and options for sustainable fuel cycles, dismantling, decommissioning and resulting material management, transverse topics (technical-economic studies, nuclear energy applications other than electricity production, challenges of sustainable development of nuclear energy, advanced researches)

  7. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... in cooperation and development of ICTs seems to pass unnoticed. However, since they are aligned into ICTs, technicities impact innovation....

  8. Objectives and overview of the workshop

    International Nuclear Information System (INIS)

    Ajayi, R. I.

    1999-01-01

    This paper by the Technical Director of the FRPS gives a presentation on the broad objective and overviews of the workshop. The growing use of radioactivity in industrial and scientific applications and research and the importance of radiation protection are presented. Cognisance is given to harmful levels of exposure

  9. Quasi-elastic Neutrino Scattering - an Overview

    International Nuclear Information System (INIS)

    Sobczyk, Jan T.

    2011-01-01

    A non-technical overview of charge current quasi-elastic neutrino interaction is presented. Many body computations of multinucleon ejection which is proposed to explain recent large axial mass measurements are discussed. A few comments on recent experimental results reported at NuInt11 workshop are included.

  10. Treatment Option Overview (Adult Soft Tissue Sarcoma)

    Science.gov (United States)

    ... reacts to the light. Certain factors affect treatment options and prognosis (chance of recovery). The treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  11. Treatment Option Overview (Small Intestine Cancer)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  12. Treatment Option Overview (Adult Hodgkin Lymphoma)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  13. Treatment Option Overview (Small Cell Lung Cancer)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  14. Treatment Option Overview (Adult Acute Lymphoblastic Leukemia)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... marrow , or other parts of the body. Treatment Option Overview Key Points There are different types of ...

  15. Counterfeit Parts Prevention Strategy Guide Product Overview

    Science.gov (United States)

    2014-05-08

    avoidance • Develop a risk assessment methodology when using unauthorized or non- franchised suppliers • Identify methods to ensure and verify sub-tier...comments received – Obtain endorsement across team members for product and follow-on recommendations • Workshop Accomplishments – Obtained buy -in

  16. Petroleum products : part 1 - overview and prospects

    International Nuclear Information System (INIS)

    1996-01-01

    The petroleum products industry represents the downstream (refining and products marketing) portion of the oil industry. It includes companies that refine crude oil into petroleum products, transport them to distribution storage terminals and sell them directly to major users or wholesale and retail outlets. Issues regarding investment and financing, trade and export strategies, technological innovation and adaptation, human resources, the environment and sustainable development within the sector are discussed, illustrating, among other things, how government and industry can commit to mutually beneficial goals and actions. The petroleum industry is a major source of revenue for Canadian governments which collect about $9 billion annually in federal and provincial taxes on gasoline alone. The industry is capital-intensive and very competitive, with a strong domestic focus. Key points relevant to the sector are examined from the global, North American and Canadian perspectives, highlighting changing conditions and industry responses in both the refining and retailing segments of the sector. Growth prospects in terms of profitability and environmental issues were also analyzed. 11 figs

  17. Current and Future Parts Management at NASA

    Science.gov (United States)

    Sampson, Michael J.

    2011-01-01

    This presentation provides a high level view of current and future electronic parts management at NASA. It describes a current perspective of the new human space flight direction that NASA is beginning to take and how that could influence parts management in the future. It provides an overview of current NASA electronic parts policy and how that is implemented at the NASA flight Centers. It also describes some of the technical challenges that lie ahead and suggests approaches for their mitigation. These challenges include: advanced packaging, obsolescence and counterfeits, the global supply chain and Commercial Crew, a new direction by which NASA will utilize commercial launch vehicles to get astronauts to the International Space Station.

  18. Ethical and technical considerations for the creation of cell lines in the head & neck and tissue harvesting for research and drug development (Part II: Ethical aspects of obtaining tissue specimens

    Directory of Open Access Journals (Sweden)

    Upile Tahwinder

    2009-04-01

    Full Text Available Abstract Background Although much has been published for the development of cell lines, these were lab based and developed for scientific technical staff. Objective of review We discuss the ethical implications of tissue retention and present a generic consent form (Part II. We also present a simple and successful protocol for the development of cell lines and tissue harvesting for the clinical scientist (Part I. Conclusion Consent is also more proximate and assurance can be given of appropriate usage. Ethical questions concerning tissue ownership are in many institutions raised during the current consenting procedure. We provide a robust ethical framework, based on the current legislation, which allows clinicians to be directly involved in cell and tissue harvesting.

  19. The NOvA Technical Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Ayres, D.S.; Drake, G.R.; Goodman, M.C.; Grudzinski, J.J.; Guarino, V.J.; Talaga, R.L.; Zhao, A.; /Argonne; Stamoulis, P.; Stiliaris, E.; Tzanakos, G.; Zois, M.; /Athens U. /Caltech /UCLA /Fermilab /College de France /Harvard U. /Indiana U. /Lebedev Inst. /Michigan State U. /Minnesota U., Duluth /Minnesota U.

    2007-10-08

    A design performance relative to the Design Criteria set out in Chapter 4. Chapter 7 presents the Work Breakdown Structure dictionary at Level 3 and the Milestone dictionary. Chapters 8 through 17 then take each Level 2 WBS element of the NOvA project and present each part of the design in more detail than the overview given in Chapter 5. Specific technical design criteria are delineated for each part of the project in addition to the scientific design criteria outlined in Chapter 4. Changes in the design since the NOvA CDR are discussed in detail. The work remaining to bring each part of this preliminary design to a final design is outlined. Appendix A is a guide to other NOvA Project documentation with links to those documents.

  20. The NOvA Technical Design Report

    International Nuclear Information System (INIS)

    Ayres, D.S.; Drake, G.R.; Goodman, M.C.; Grudzinski, J.J.; Guarino, V.J.; Talaga, R.L.; Zhao, A.; Stamoulis, P.; Stiliaris, E.; Tzanakos, G.; Zois, M.

    2007-01-01

    in Chapter 4. Chapter 7 presents the Work Breakdown Structure dictionary at Level 3 and the Milestone dictionary. Chapters 8 through 17 then take each Level 2 WBS element of the NOvA project and present each part of the design in more detail than the overview given in Chapter 5. Specific technical design criteria are delineated for each part of the project in addition to the scientific design criteria outlined in Chapter 4. Changes in the design since the NOvA CDR are discussed in detail. The work remaining to bring each part of this preliminary design to a final design is outlined. Appendix A is a guide to other NOvA Project documentation with links to those documents

  1. The Use of Adsorbent Materials of Improving the Characteristics of Polluted Soils, Part 1 Phytoremediation of Soils Polluted with Oil Products, Cultivated with Technical Plants

    Directory of Open Access Journals (Sweden)

    Smaranda Masu

    2015-10-01

    Full Text Available In this study are presented in pot experimental variants regarding alternatives to improve the characteristics of soils polluted with 74.12 ± 3.50 g·kg-1 D.M. total petroleum hydrocarbon (TPH in order to apply the phytoremediation process using technical plants from the common flax (Linum usitatissimum. The harmful effects of TPH polluted soils to plants was reduced by using fly ash from thermal plant as temporary adsorbent of non-polar pollutants, petroleum products. The increase of water retention capacity of the soil was achieved by treatments with indigenous volcanic tuff. The lack of nutrients, based on N and P in soils contaminated with TPH rich in C compounds are completed using sewage sludge anaerobically stabilized. The use of appropriate amounts of fly ash and fertilizer agents in the presence of volcanic tuff caused the formation of strong networks of roots and rich harvests of plants, stems and seeds from the treated soil. The TPH reduction efficiency of TPH polluted soils treated with fly ash (TPH soil: fly ash ratio 12:1 wt. / wt. and anaerobically stabilized sewage sludge respectively indigenous volcanic tuff during one vegetative cycle of crops was in the range of 56.2 - 63.25 %.

  2. An overview of decision theory

    International Nuclear Information System (INIS)

    Hansson, S.O.

    1991-01-01

    This paper has been written to provide a non-technical overview of modern decision theory and to identify some of the major ways in which decision theory is relevant to the nuclear waste issue. It concludes that the use of decision theory in the nuclear waste issue should be further developed, and more sophisticated tools should be made used of. In particular, the application of models for uncertainty and for collective decision-making is warranted, and the same applies to models that include the earlier phases of the decision-making process. (92 refs.)

  3. Slurry pipeline technology: an overview

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, Jay P. [Pipeline Systems Incorporated (PSI), Belo Horizonte, MG (Brazil); Lima, Rafael; Pinto, Daniel; Vidal, Alisson [Ausenco do Brasil Engenharia Ltda., Nova Lima, MG (Brazil). PSI Div.

    2009-12-19

    Slurry pipelines represent an economical and environmentally friendly transportation means for many solid materials. This paper provides an over-view of the technology, its evolution and current Brazilian activity. Mineral resources are increasingly moving farther away from ports, processing plants and end use points, and slurry pipelines are an important mode of solids transport. Application guidelines are discussed. State-of-the-Art technical solutions such as pipeline system simulation, pipe materials, pumps, valves, automation, telecommunications, and construction techniques that have made the technology successful are presented. A discussion of where long distant slurry pipelines fit in a picture that also includes thickened and paste materials pipe lining is included. (author)

  4. Development of technics for separation and sorting system of different parts of field plants; Peltokasvien eri osien erottelu- ja lajittelutekniikoiden kehittaeminen

    Energy Technology Data Exchange (ETDEWEB)

    Lindh, T.; Kallio, E.; Taipale, R.; Leinonen, A.

    1996-12-31

    The aim of the research is to construct a segregation concept for an integrated method, by which it is possible to produce fiber fraction for pulping industry and byproduct fraction for energy production of the field plants to be processed. The starting point of the concept development was, that the method consists of the plant material processing phase, in which different plant components are segregated from each other, and a sorting phase in which the plant components are divided into different fractions on the basis of the use. Following topics were studied in the first year of this two year research: properties of spring-harvested reed canary grass and the component of it from the point of view of segregation, mechanical dry-processing methods for segregation of plant components from each other and sorting methods, by which the pulp fraction and by-product fraction are separated from each other. Chopping, crushing and milling have been studied as alternatives for processing. The particle size distribution of the produced material has been estimated. Sorting tests, based on air classification, have been made. Property analyses, such as ash content, have been made for different particle classes, by which the most suitable particle size class for sorting was determined. Processing and sorting research of chopped reed canary grass will be continued in 1996. Technical/economical analyses will be made of the costs of the separator by taking the alternatives, in which the separator unit operates at the farm or at the mill, into account. The final separation concept will be made using the results obtained in the experimental researches and cost analyses

  5. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  6. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  7. ATLAS overview week highlights

    CERN Multimedia

    D. Froidevaux

    2005-01-01

    A warm and early October afternoon saw the beginning of the 2005 ATLAS overview week, which took place Rue de La Montagne Sainte-Geneviève in the heart of the Quartier Latin in Paris. All visitors had been warned many times by the ATLAS management and the organisers that the premises would be the subject of strict security clearance because of the "plan Vigipirate", which remains at some level of alert in all public buildings across France. The public building in question is now part of the Ministère de La Recherche, but used to host one of the so-called French "Grandes Ecoles", called l'Ecole Polytechnique (in France there is only one Ecole Polytechnique, whereas there are two in Switzerland) until the end of the seventies, a little while after it opened its doors also to women. In fact, the setting chosen for this ATLAS overview week by our hosts from LPNHE Paris has turned out to be ideal and the security was never an ordeal. For those seeing Paris for the first time, there we...

  8. Mechanical engineering department technical review

    International Nuclear Information System (INIS)

    Carr, R.B.; Denney, R.M.

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work

  9. Mechanical Engineering Department. Technical review

    Energy Technology Data Exchange (ETDEWEB)

    Simecka, W.B.; Condouris, R.A.; Talaber, C. (eds.)

    1980-01-01

    The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work.

  10. Mechanical Engineering Department Technical Review

    International Nuclear Information System (INIS)

    Carr, R.B.; Denney, R.M.

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication

  11. Mechanical Engineering Department. Technical review

    International Nuclear Information System (INIS)

    Simecka, W.B.; Condouris, R.A.; Talaber, C.

    1980-01-01

    The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work

  12. Technical Cooperation Report for 2014. Report by the Director General

    International Nuclear Information System (INIS)

    2015-06-01

    The Technical Cooperation Report for 2014 is set out in three parts: A — Strengthening the Agency’s Technical Cooperation Activities; B — TC Programme Resources and Delivery; and C — Programme Activities and Achievements in 2014: Regional Overview. Annex 1 describes examples of project activities and achievements in specific thematic areas, and Annex 2 describes the activities of the Programme of Action for Cancer Therapy. Annex 3 presents the TC programme Fields of Activity, grouped for reporting purposes. Part A is composed of two sections. Part A.1 provides an overview of the Agency’s technical cooperation (TC) activities in 2014. The first section is devoted to the global development context, and highlights the importance of the post-2015 development agenda, and the value of the Sustainable Development Goals’ programmatic framework for the Agency’s technical cooperation activities. The section then describes how the programme is tailored to respond to the specific needs and priorities of each region, focusing on efforts to develop human resources and build capacities in the peaceful application of nuclear science and technology, including through postgraduate training courses, assistance in drafting legislation, distance learning initiatives and technical cooperation among developing countries. The section also presents a snapshot of TC projects that address radioactive waste management, reflecting the topic of the 2014 Scientific Forum. Part A.2 focuses on efforts to build a more efficient and effective TC programme, in particular on efforts to strengthen the Country Programme Framework template. The section reviews progress made in 2014 in establishing and operationalizing partnerships with the United Nations and other relevant international and regional organizations. This section closes with an overview of actions undertaken in 2014 to continually improve the TC programme, notably through training in the Logical Framework Approach, and

  13. Remediation of contaminated areas in the aftermath of the accident at the Fukushima Daiichi Nuclear Power Station. Overview, analysis and lessons learned. Part 1. A report on the ''decontamination pilot project''

    International Nuclear Information System (INIS)

    Nakayama, Shinichi; Kawase, Keiichi; Iijima, Kazuki; Miyahara, Kaname; Hardie, Susan; McKinley, Ian; Klein, Liza; Yashio, Shoko

    2015-03-01

    international audience. In Part 2, the subsequent application of output from this project to regional remediation now being conducted by the MOE and municipalities, is discussed, along with a status update on such work (including radioactivity monitoring), an overview of associated JAEA's R and D and international input to / review of regional environmental decontamination in Fukushima. (author)

  14. Remediation of contaminated areas in the aftermath of the accident at the Fukushima Daiichi Nuclear Power Station. Overview, analysis and lessons learned. Part 2. Recent developments, supporting R and D and international discussions

    International Nuclear Information System (INIS)

    Nakayama, Shinichi; Kawase, Keiichi; Iijima, Kazuki; Miyahara, Kaname; Hardie, Susan; McKinley, Ian; Klein, Liza; Yashio, Shoko

    2015-03-01

    audience. In this Part 2, the subsequent application of output from these projects to regional remediation now being conducted by the MOE and municipalities, is discussed, along with a status update on such work (including radioactivity monitoring), an overview of associated JAEA's R and D and international input to / review of regional environmental decontamination in Fukushima. (author)

  15. Technical Information on the Carbonation of the EBR-II Reactor, Summary Report Part 1: Laboratory Experiments and Application to EBR-II Secondary Sodium System

    Energy Technology Data Exchange (ETDEWEB)

    Steven R. Sherman

    2005-04-01

    Residual sodium is defined as sodium metal that remains behind in pipes, vessels, and tanks after the bulk sodium metal has been melted and drained from such components. The residual sodium has the same chemical properties as bulk sodium, and differs from bulk sodium only in the thickness of the sodium deposit. Typically, sodium is considered residual when the thickness of the deposit is less than 5-6 cm. This residual sodium must be removed or deactivated when a pipe, vessel, system, or entire reactor is permanently taken out of service, in order to make the component or system safer and/or to comply with decommissioning regulations. As an alternative to the established residual sodium deactivation techniques (steam-and-nitrogen, wet vapor nitrogen, etc.), a technique involving the use of moisture and carbon dioxide has been developed. With this technique, sodium metal is converted into sodium bicarbonate by reacting it with humid carbon dioxide. Hydrogen is emitted as a by-product. This technique was first developed in the laboratory by exposing sodium samples to humidified carbon dioxide under controlled conditions, and then demonstrated on a larger scale by treating residual sodium within the Experimental Breeder Reactor II (EBR-II) secondary cooling system, followed by the primary cooling system, respectively. The EBR-II facility is located at the Idaho National Laboratory (INL) in southeastern Idaho, U.S.A. This report is Part 1 of a two-part report. It is divided into three sections. The first section describes the chemistry of carbon dioxide-water-sodium reactions. The second section covers the laboratory experiments that were conducted in order to develop the residual sodium deactivation process. The third section discusses the application of the deactivation process to the treatment of residual sodium within the EBR-II secondary sodium cooling system. Part 2 of the report, under separate cover, describes the application of the technique to residual sodium

  16. Overview of the Anik C satellites and services

    Science.gov (United States)

    Smart, F. H.

    An overview of the important technical characteristics of the Anik C series of Canadian communications satellites is presented. The system was launched as part of the Telesat Communications payload of the Space Shuttle in 1982. Among the services the system will in the near future provide are: a 27 MHz channel bandwidth television service for pay-TV distribution in Canada; two TV channels for hockey broadcasts and a transportable TV system; a heavy-voice route telephone service for five major Canadian cities; and a telephone system for business voice and data communications. Services anticipated for Anik-C satellites later in the decade include a Single Channel Per Carrier (SCPC) voice and data communications system for British Columbia and the Maritime Provinces, and a direct-to-home broadcast service to be sold to television markets in the United States.

  17. Quality criteria for bottom ashes for civil construction. Part II Technical characteristics of bottom ashes; Kvalitetskriterier foer bottenaskor till vaegoch anlaeggningsbyggnad. Etapp II Bottenaskors tekniska egenskaper

    Energy Technology Data Exchange (ETDEWEB)

    Bahr, Bo von; Loorents, Karl-Johan; Ekvall, Annika; Arvidsson, Haakan [SP Swedish National Testing and Research Inst., Boraas (Sweden)

    2006-01-15

    This report is the presentation of the second of two stages. This stage deals mainly with the testing of three different types of ashes and the evaluation and suitability of the chosen test methods. The project only relates to the technical aspects of ashes. The report is written in such a way that both ash owners (e.g. Energy companies) and those who build roads and constructions will find it meaningful. All test methods that are used for traditional materials (gravel and crushed rock) is not fitting for ashes. New test methods for some properties that will be tested must therefore be presented, tested practically and evaluated. The project encompasses both road and construction building but has a focus on road construction since there the highest and comprising demands are defined. Three bottom ashes of different types have been studied regarding some tenfold mechanical/physical parameters, essential for the functionality of the ash as a construction material. An important conclusion is that ash is from a functionality and characterisation point of view, an undefined concept that encloses materials with widely different properties. Despite that only three ashes have been looked into the range of results are varying large for some properties. This is especially true for the loose bulk density, water absorption and grain size distribution. It is also clear that some of the standard test methods for aggregates need to be exchanged by other methods, which are more adapted to alternative materials. One such example is water absorption, a property that further influences frost resistance, frost heave and such. All the proposed test methods that been used in the project is considered fitting for its purpose. The test methods can be divided into two categories the ones that yield easy assessable results and those that yield results hard to appraise. To the first group belong grain size distribution, loose bulk density, thermal conductivity, permeability and frost heave

  18. Technical activities, 1990: Surface Science Division

    International Nuclear Information System (INIS)

    Powell, C.J.

    1991-05-01

    The report summarizes technical activities and accomplishments of the NIST Surface Science Division during Fiscal Year 1990. Overviews are presented of the Division and of its three constituent groups: Surface Dynamical Processes, Thin Films and Interfaces, and Surface Spectroscopies and Standards. These overviews are followed by reports of selected technical accomplishments during the year. A summary is given of Division outputs and interactions that includes lists of publications, talks, committee assignments, seminars (including both Division seminars and Interface Science seminars arranged through the Division), conferences organized, and a standard reference material certified. Finally, lists are given of Division staff and of guest scientists who have worked in the Division during the past year

  19. The Agency's technical co-operation activities in 1992

    International Nuclear Information System (INIS)

    1993-08-01

    This report on the International Atomic Energy Agency's Technical Co-operation Activities in 1992 contains an overview of the general issues involved, including both in-house and external developments, resources and delivery, and evaluation of programs; an overview by field of activity and by division within the Agency; an overview by geographic area, distinguishing (i) Africa, (ii) Asia and the Pacific, (iii) Latin America, (iv) and the Middle East and Europe; an overview by component (i.e., experts, equipment, fellowships, training courses, sub-contracts and miscellaneous); and an overview by fund technical assistance and co-operation fund, extrabudgetary resources, United Nations Development Program (UNDP), assistance in kind. It also contains a profile on technical co-operation activities in Latin America. Projects concluded during 1992 are listed together with a description of their achievements. It concludes with implementation summaries. 10 figs, 9 tabs

  20. Technical-economical feasibility of the wet oxidation process: Experiences on real scale plant. Part I; Fattibilita` tecnico-economica del processo di ossidazione ad umido: Esperienze di trattamento su impianto a piena scala. Parte I

    Energy Technology Data Exchange (ETDEWEB)

    Collivignarelli, Carlo; Bertanza, Giorgio [Brescia, Univ. (Italy). Dipt. di Ingegneria Civile; Baldi, Marco [Pavia, Univ. (Italy). Dipt. di Ingegneria Idraulica e Ambientale; Bissolotti, Giorgio; Calvi, Riccardo [SIAD Spa, Bergamo (Italy); Del Rio, Mauro; Pergetti, Mauro [AGAC, Reggio Emilia (Italy)

    1997-03-01

    In the first part of this work the wet oxidation process is compared with some other oxidation treatments (like Fenton oxidation, oxidation, also with UV light, incineration, ect.) in order to assess its proper application field. Besides, the main cases in which wet oxidation is employed in wastewater treatment are described and the results of some previous experiences of the authors are summarized. In the second part they discuss the results of an experimentation carried out on a real scale treatment plant (maximum inflow rate 1,5 m{sup 3}/h). The plant was fed with low biodegradable wastewaters (COD = 2.5 - 175 g/L) coming from different industrial sectors. The following process conditions were maintained: temperature = 280-300 deg C, final pressure = 11-12.5 MPa. From the results of the experimentation they concluded that this process is suitable or the pre-treatment of wastewaters with high non-biodegradable matter content, with COD initial concentrations from 10-20 up to 150 g/L. In these conditions, it is also convenient from the economical point of view, with respect to other chemical-physical of thermal processes. In order to achieve the full functionality within an industrial waste treatment facility, some operating measures are required aimed to homogenize the treated wastewater, which has carefully characterized.

  1. Technical-economical feasibility of the wet oxidation process: Experiences on real scale plant. Part II; Fattibilita` tecnico-economica del processo di ossidazione ad umido: Esperienze di trattamento su impianto a piena scala. Parte II

    Energy Technology Data Exchange (ETDEWEB)

    Collivignarelli, Caro; Bertanza, Giorgio [Brescia, Univ. (Italy). Dipt. di Ingegneria Civile; Baldi, Marco [Pavia, Univ. (Italy). Dipt. di Ingegneria Idraulica e Ambientale; Bissolotti, Giorgio; Calvi Riccardo [SIAD Spa, Bergamo (Italy); Del Rio, Mauro; Pergetti, Mauro [AGAC, Reggio Emilia (Italy)

    1997-04-01

    In the first part of this work the wet oxidation process is compared with some other oxidation treatments (like Fenton oxidation, oxidation, also with UV light, incineration, ect.) in order to assess its proper application field. Besides, the main cases in which wet oxidation is employed in wastewater treatment are described and the results of some previous experiences of the authors are summarized. In the second part they discuss the results of an experimentation carried out on a real scale treatment plant (maximum inflow rate 1,5 m{sup 3}/h). The plant was fed with low biodegradable wastewaters (COD = 2.5 - 175 g/L) coming from different industrial sectors. The following process conditions were maintained: temperature = 280-300 deg C, final pressure = 11-12.5 MPa. From the results of the experimentation they concluded that this process is suitable or the pre-treatment of wastewaters with high non-biodegradable matter content, with COD initial concentrations from 10-20 up to 150 g/L. In these conditions, it is also convenient from the economical point of view, with respect to other chemical-physical of thermal processes. In order to achieve the full functionality within an industrial waste treatment facility, some operating measures are required aimed to homogenize the treated wastewater, which has carefully characterized.

  2. AHMCT Intelligent Roadway Information System (IRIS) technical support and testing

    Science.gov (United States)

    2011-12-31

    This report documents the research project AHMCT IRIS Technical Support and Testing, : performed under contract 65A0275, Task ID 1777. It presents an overview of the Intelligent : Roadway Information System (IRIS), and its design and function. ...

  3. Particle Dark Matter: An Overview

    International Nuclear Information System (INIS)

    Roszkowski, Leszek

    2009-01-01

    Dark matter in the Universe is likely to be made up of some new, hypothetical particle which would be a part of an extension of the Standard Model of particle physics. In this overview, I will first briefly review well motivated particle candidates for dark matter. Next I will focus my attention on the neutralino of supersymmetry which is the by far most popular dark matter candidate. I will discuss some recent progress and comment on prospects for dark matter detection.

  4. Part-load performance and emissions of a spark ignition engine fueled with RON95 and RON97 gasoline: Technical viewpoint on Malaysia’s fuel price debate

    International Nuclear Information System (INIS)

    Mohamad, Taib Iskandar; How, Heoy Geok

    2014-01-01

    Highlights: • Recent Malaysia’s gasoline price hike affects mass perception and vehicle sales. • Effects of RON95 and RON97 on a representative engine was experimentally studied. • RON95 produced better torque, power, fuel efficiency and lower NO x . • RON97 gasoline resulted in lower BSFC and lower emissions of CO 2 , CO and HC. • Performance-emission-price cross-analysis indicated RON95 as the better option. - Abstract: Due to world crude oil price hike in the recent years, many countries have experienced increase in gasoline price. In Malaysia, where gasoline are sold in two grades; RON95 and RON97, and fuel price are regulated by the government, gasoline price have been gradually increased since 2009. Price rise for RON97 is more significant. By 2014, its per liter price is 38% more than that of RON95. This has resulted in escalated dissatisfaction among the mass. People argued they were denied from using a better fuel (RON97). In order to evaluate the claim, there is a need to investigate engine response to these two gasoline grades. The effect of gasoline RON95 and RON97 on performance and exhaust emissions in spark ignition engine was investigated on a representative engine: 1.6L, 4-cylinder Mitsubishi 4G92 engine with CR 11:1. The engine was run at constant speed between 1500 and 3500 rpm with 500 rpm increment at various part-load conditions. The original engine ECU, a hydraulic dynamometer and control, a combustion analyzer and an exhaust gas analyzer were used to determine engine performance, cylinder pressure and emissions. Results showed that RON95 produced higher engine performance for all part-load conditions within the speed range. RON95 produced on average 4.4% higher brake torque, brake power, brake mean effective pressure as compared to RON97. The difference in engine performance was more significant at higher engine speed and loads. Cylinder pressure and ROHR were evaluated and correlated with engine output. With RON95, the engine

  5. Studies of two stage gas turbine combustor for biomass powder. Part 1, Atmospheric cyclone gasification experiments with wood powder. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Degerman, Bengt; Hedin, Johan; Fredriksson, Christian; Kjellstroem, Bjoern; Salman, Hassan [Luleaa Univ. of Technology (Sweden). Dept. of Mechanical Engineering

    2000-10-01

    and Na in the gas entering a gas turbine with inlet temperature of 850 deg C has been estimated to 10 - 20 mg/kg gas. Reduction of this load of alkali metals requires improved separation function of the cyclone. One possibility to achieve this could be to use a wood powder with larger particles. Tests with a prototype for a double piston feeder to be used for pressurisation of the wood powder showed after several modifications that the pistons will move as intended. The difficulties experienced however also show a need for a much more detailed design study than could be carried out in this project. A problem area to be studied in particular is the choice of sealing design to eliminate risk for penetration of wood powder into the space between moving parts. The pressurised test facility has been designed and the main parts have been installed. Some completions are necessary before commissioning tests can be done.

  6. Agile Software Development: An Introduction and Overview

    Science.gov (United States)

    Dingsøyr, Torgeir; Dybå, Tore; Moe, Nils Brede

    Agile software development is an important topic in software engineering and information systems. This chapter provides a characterization and definition of agile software development, an overview of research through a summary of existing overview studies, an analysis of the research literature so far, and an introduction to the main themes of this book. The first part of the book provides foundations and background of agile development. The second part describes findings from studies of agile methods in practice. The third part identifies principal challenges and discusses new frontiers that agile development methods will meet in the future.

  7. Digital libraries philosophies, technical design considerations, and example scenarios

    CERN Document Server

    Stern, David

    1999-01-01

    An unparalleled overview of current design considerations for your digital library! Digital Libraries: Philosophies, Technical Design Considerations, and Example Scenarios is a balanced overview of public services, collection development, administration, and systems support, for digital libraries, with advice on adopting the latest technologies that appear on the scene. As a professional in the library and information science field, you will benefit from this special issue that serves as an overview of selected directions, trends, possibilities, limitations, enhancements, design principals, an

  8. 15 CFR 990.12 - Overview.

    Science.gov (United States)

    2010-01-01

    ... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE OIL POLLUTION ACT REGULATIONS NATURAL RESOURCE DAMAGE ASSESSMENTS Introduction § 990.12 Overview. This part describes three phases of a natural resource..., is described in subpart D of this part. The Restoration Planning Phase, during which trustees...

  9. Technical Note

    African Journals Online (AJOL)

    Administratör

    In this report on four patients, we did not use any of these techniques. The existence and the site of the fistulas was clearly demonstrated using basic but important preoperative detailed assessment and two intraoperative findings. The preoperative referral note that indicated the site of technical difficulty during the previous ...

  10. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  11. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  12. Technical endoscopy

    International Nuclear Information System (INIS)

    Cavalar, K.O.

    1988-01-01

    A survey is provided on different versions of endoscopes, taking into account the new developments of video endoscopy. With a variety of practical examples it is shown that technical tests using endoscopy are a demanding task for nondestructive testing, whose requirements can only be met on a customized basis. (orig./HP) [de

  13. Overview of Task 4 nuclide transport data

    International Nuclear Information System (INIS)

    Serne, R.J.

    1977-01-01

    A multi-year program plan is presented to collect the necessary data on nuclide sorption-desorption interactions with geologic media. Detailed activities which need to be performed in each of the six subtasks are described. The general areas in which each subcontractor performed work in FY 77 were presented in the overview. Detailed technical discussions of each subcontractor's work will be presented in ensuing presentations

  14. Technical normalization in the geoinformatics branch

    Directory of Open Access Journals (Sweden)

    Bronislava Horáková

    2006-09-01

    Full Text Available A basic principle of the technical normalisation is to hold the market development by developing unified technical rules for all concerned subjects. The information and communication technological industry is characterised by certain specific features contrary to the traditional industry. These features bring to the normalisation domain new demands, mainly the flexibility enabling to reflect the rapidly development market of ICT elastic way. The goal of the paper is to provide a comprehensive overview of the current process of technical normalization in the geoinformatic branch

  15. Local Anesthesia Part 2: Technical Considerations

    Science.gov (United States)

    Reed, Kenneth L.; Malamed, Stanley F.; Fonner, Andrea M.

    2012-01-01

    An earlier paper by Becker and Reed provided an in-depth review of the pharmacology of local anesthetics. This continuing education article will discuss the importance to the safe and effective delivery of these drugs, including needle gauge, traditional and alternative injection techniques, and methods to make injections more comfortable to patients. PMID:23050753

  16. Chronic Diseases Overview

    Science.gov (United States)

    ... Plan Templates All Chronic Surveillance Systems Communications Center Social Media Press Room Press Release Archives Multimedia Communication Campaigns Publications Chronic Disease Overview 2016–2017 At A ...

  17. Advanced Technical Drafting (Industrial Arts) Curriculum Guide. Bulletin 1751.

    Science.gov (United States)

    Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

    This curriculum guide contains materials for a 17-unit course in advanced technical drafting, a followup to the basic technical drafting course in the industrial arts curriculum for grades 10-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A three-page course overview provides…

  18. Solar Technical Assistance Team 2013 Webinars | State, Local, and Tribal

    Science.gov (United States)

    Governments | NREL 3 Webinars Solar Technical Assistance Team 2013 Webinars The Solar Technical Assistance Team (STAT) 2013 webinar series provides an overview of solar technologies, resources, and the following sessions are available: Solar Finance for Residential and Commercial Customers and Potential Roles

  19. The Agency's technical co-operation activities in 1993

    International Nuclear Information System (INIS)

    1994-08-01

    This document reviews the IAEA's Technical Cooperation activities for 1993. Apart from an overview, the report contains reviews by Agency programmes and technical divisions, by area, by component and by fund. Summaries of project implementation are also included, as well as indications of the achievements of projects completed in 1993

  20. Overview of synergistic aging effects

    International Nuclear Information System (INIS)

    Steigelmann, W.; Farber, M.

    1982-01-01

    Proper, technically defensible qualification of materials and equipment for nuclear power facilities requires that the effects of combined environment exposures be addressed. The full significance of synergistic effects resulting from combined stresses still remains largely an unknown to be provided for by use of conservatisms, allowing a sizeable margin in test programs and analyses to account for possible combined effects. However, these margins, when applied to sequential aging tests, may under- or over-estimate the qualified life of the material or equipment. Experimentation with radiation dose-rate effects, simultaneous vs. sequential ordered exposures, and other combined environment testing are highlighted in this paper to provide an overview of the current state-of-knowledge concerning synergistic effects and their significance to qualification programs

  1. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  2. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  3. INDOT Technical Training Plan : [Technical Summary

    Science.gov (United States)

    2012-01-01

    A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

  4. Technical justifications for the tests and criteria in the waste form technical position appendix on cement stabilization

    International Nuclear Information System (INIS)

    Siskind, B.; Cowgill, M.G.

    1992-01-01

    As part of its technical assistance to the Nuclear Regulatory Commission (NRC), Brookhaven National Laboratory (BNL) developed a background document for the cement stabilization appendix, Appendix A, to Rev. 1 of the Technical Position on Waste Form (TP). Here we present an overview of this background document, which provides technical justification for the stability tests to be performed on cement-stabilized waste forms and for the criteria posed in each test, especially for those tests which have been changed from their counterparts in the May 1983 Rev. 0 TP. We address guidelines for procedures from Appendix A which are considered in less detail or not at all in the Rev. 0 of the TP, namely, qualification specimen preparation (mixing, curing, storage), statistical sampling and analysis, process control program specimen preparation and examination, and surveillance specimens. For each waste form qualification test, criterion or procedural guidelines, we consider the reason for its inclusion in Appendix A, the changes from Rev. 0 of the TP (if applicable), and a discussion of the justification or rationale for these changes

  5. Technical justifications for the tests and criteria in the waste form Technical position appendix on cement stabilization

    International Nuclear Information System (INIS)

    Siskind, B.; Cowgill, M.G.

    1992-01-01

    As part of its technical assistance to the Nuclear Regulatory Commission (NRC), Brookhaven National Laboratory (BNL) developed a background document for the cement stabilization appendix. Appendix A, to Rev. 1 of the Technical Position on Waste Form (TP). Here we present an overview of this background document, which provides technical justification for the stability tests to be performed on cement-stabilized waste forms and for the criteria posed in each test) especially for those tests which have been changed from their counterparts in the May 1983 Rev. 0 TP. We address guidelines for procedures from Appendix A which are considered in less detail or not at all in the Rev. 0 of the TP, namely, qualification specimen preparation (mixing, curing, storage), statistical sampling and analysis, process control program specimen preparation and examination, and surveillance specimens. For each waste form qualification test, criterion or procedural guideline, we consider the reason for its inclusion in Appendix A, the changes from Rev. 0 of the TP (if applicable), and a discussion of the justification or rationale for these changes. (author)

  6. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    2004-01-01

    Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrate unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). • 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) • 10:30 - 10:45 coffee • 10:45 - 13:00 (second part)...

  7. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    2004-01-01

    Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrate unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). • 09:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) • 10:30 - 10:45 coffee • 10:45 - 13:00 (second part)...

  8. Technical project for a new water purification solution

    Directory of Open Access Journals (Sweden)

    Toma Adina

    2018-01-01

    Full Text Available This research is part of the RO-BG Cross-Border Cooperation Program, project “CLEANDANUBE”, MIS-ETC 653, which has finalised by providing a common strategy to prevent the Danube’s pollution technological risks with oil and oil products. This paper presents a new sustainable water purification solution. A short introduction will be offered and an overview regarding the research and new methods to greening the waste is provided. The theoretical aspects of the centrifugal separation phenomenon are studied and the preliminary project bases were established. The paper conveys the possible constructive variations and the technological implications of those. Ultimately, the technical project for a new water purification solution and conclusions with critical points encountered during the designing phase are presented.

  9. Environmental impacts on technical products

    International Nuclear Information System (INIS)

    1991-01-01

    The interaction between an object and its environment is examined by methods of environment simulation. With regard to possible synergisms, technical considerations and holistic thinking are essential. Environmental simulation is mainly concerned with questions of ability to function and the service life of technical products in their environment. The environmental simulation is used to discover cause/effect mechanisms in ageing and weathering processes. Questions of artificial ageing and speeded up time tests play a great part here. (orig.) [de

  10. TECHNICAL COORDINATION

    CERN Document Server

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  11. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  12. How to be an Effective Technical Writer?

    Directory of Open Access Journals (Sweden)

    M Solaiman Ali

    2012-07-01

    Full Text Available Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations. Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical writing for engineers stresses that a successful engineering career requires strong writing skills. Part 2 (How to write the major sections or elements of a report describes the techniques of writing the abstract, introduction, literature review, procedure/methods & materials, results, discussion, conclusion, and recommendations. Part 3 (Special features of technical writing brings into focus some of the special features of technical writing such as tables & graphs in the text, graphics in instructions, team writing, ethics (plagiarism, document sources, three citation styles and IEEE reference style. Part 4 (Technical usage deals with writing abbreviations, initialisms and acronyms, numbers, units of measurement, and equations.Part 5 (Technical style highlights the imperative writing style and other features of technical writing such as the use of active and passive voices, plain vs. complex syntax, avoiding redundant or superfluous expressions, and vague generalities, using words or expressions with visual impact, the past tense to describe experimental work, the present tense to describe hypotheses, principles, theories and truths, and breaking up the text of the report into short sections. Part 6 (Document specifications emphasizes the technical writer’s need to conform to such document specifications as word count, format, font, number of words per line of text imposed. Part 7 (Reader-friendly technical writing suggests choosing the varied writing modes

  13. Medical Negligence : An Overview

    Directory of Open Access Journals (Sweden)

    Bratin Kumar Dey

    2017-04-01

    Full Text Available Medical professionals are treated as next to God. They provide humanitarian services and gives solace to individuals suffering from various diseases and disorders. Due to their great service to humanity, the doctors and medical professionals are treated with reverence and since the ancient times the medical profession has been considered as a noble profession. However with the passage of time, there has been a change in the doctor - patient relationship. During the last few decades a number of incidents have come to light in which the patients have suffered due to the error and inadvertent conduct of doctors. Due to the increasing conflicts and legal disputes between the doctors and patients, most of the legal systems have developed various rules and principles to deal with such inadvertent behavior of doctors. This has led to the development of a new branch of jurisprudence, i.e. medical negligence. Hence, any negligence on part of the medical professional would be treated as either a tort of negligence or a deficiency in service under Consumer Protection Act, 1986. As the profession involves the idea of an occupation requiring purely intellectual skills or of manual skills controlled by the intellectual skill of the operator, it is distinctively different from an occupation, which is substantially production or sale or arrangement for the production or sale of commodities. Medicine is a highly complex domain. It is difficult for consumer laws to review medical negligence cases with flawless technical clarity and accuracy. Thus medical negligence is not purely a matter of consideration for judiciary but also the technical inputs of specialized experts in the field have substantial weightage while deciding the case of medical negligence against doctors. The present paper is devoted to introvert inspection of negligence in medical profession in the light of existing laws with more emphasis on the interpretation of consumer protection law by

  14. NASA EEE Parts and NASA Electronic Parts and Packaging (NEPP) Program Update 2018

    Science.gov (United States)

    Label, Kenneth A.; Sampson, Michael J.; Pellish, Jonathan A.; Majewicz, Peter J.

    2018-01-01

    NASA Electronic Parts and Packaging (NEPP) Program and NASA Electronic Parts Assurance Group (NEPAG) are NASAs point-of-contacts for reliability and radiation tolerance of EEE parts and their packages. This presentation includes an FY18 program overview.

  15. Machining refractory alloys: an overview

    International Nuclear Information System (INIS)

    Christopher, J.D.

    1984-01-01

    Nontraditional machining is a generic term for those material removal processes that differ drastically from the historic operations such as turning, milling, drilling, tapping, and grinding. The use of primary energy modes other than mechanical, such as thermal, electrical, and chemical, sets these operations apart and reinforces their nontraditional label. Several of these newer processes have been very successful in machining close tolerance parts from refractory materials. This paper provides a general overview of both traditional and nontraditional aspects of machining refractory materials. 11 figures, 7 tables

  16. Sport prostheses and prosthetic adaptations for the upper and lower limb amputees: an overview of peer reviewed literature.

    Science.gov (United States)

    Bragaru, Mihai; Dekker, Rienk; Geertzen, Jan H B

    2012-09-01

    Sport prostheses are used by both upper- and lower-limb amputees while participating in sports and other physical activities. Although the number of these devices has increased over the past decade, no overview of the peer reviewed literature describing them has been published previously. Such an overview will allow specialists to choose appropriate prostheses based on available scientific evidence rather than on personal experience or preference. To provide an overview of the sport prostheses as they are described by the papers published in peer reviewed literature. Literature review. Four electronic databases were searched using free text and Medical Subject Headings (MESH) terms. Papers were included if they concerned a prosthesis or a prosthetic adaptation used in sports. Papers were excluded if they did not originate from peer reviewed sources, if they concerned prostheses for body parts other than the upper or lower limbs, if they concerned amputations distal to the wrist or ankle, or if they were written in a language other than English. Twenty-four papers were included in this study. The vast majority contained descriptive data and consisted of expert opinions and technical notes. Data concerning the energy efficiency, technical characteristics and special mechanical properties of prostheses or prosthetic adaptations for sports, other than running, are scarce.

  17. ATLAS Overview Week at Brookhaven

    CERN Multimedia

    Pilcher, J

    Over 200 ATLAS participants gathered at Brookhaven National Laboratory during the first week of June for our annual overview week. Some system communities arrived early and held meetings on Saturday and Sunday, and the detector interface group (DIG) and Technical Coordination also took advantage of the time to discuss issues of interest for all detector systems. Sunday was also marked by a workshop on the possibilities for heavy ion physics with ATLAS. Beginning on Monday, and for the rest of the week, sessions were held in common in the well equipped Berkner Hall auditorium complex. Laptop computers became the norm for presentations and a wireless network kept laptop owners well connected. Most lunches and dinners were held on the lawn outside Berkner Hall. The weather was very cooperative and it was an extremely pleasant setting. This picture shows most of the participants from a view on the roof of Berkner Hall. Technical Coordination and Integration issues started the reports on Monday and became a...

  18. The 'Alpine Windharvest' project - Overview; Projekt Alpine Windharvest - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schaffner, B.; Kunz, S. [Suisse Eole, Meteotest, Berne (Switzerland)

    2005-07-01

    This short introduction forms part of a final report for the Swiss Federal Office of Energy (SFOE) that presents the results of a project carried out by the Swiss wind-energy organisation 'Suisse Eole' and the meteorology specialists of the company METEOTEST. The project investigated the use of digital relief-analysis and formed part of a European wind-energy project that investigated the technical, legal and socio-economical aspects of the use of wind energy. The work-package 7 included the identification of wind-energy areas using comparative Geographic Information System (GIS) methods. An overview is provided of the wind-energy potential in the whole of the alpine region and five areas in which measurements are to be made, including GIS analyses, are defined.

  19. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2011-01-01

    1 Operational experience 2011 1.1 Overview Starting on a positive note, it is encouraging that, for the period of this report, the operation of CMS and its entire infrastructure at Point 5 was remarkably stable and efficient. No luminosity was lost due to failures of common systems or infrastructure. The major faults were two failures of rack ventilation turbines, a leak in a water pump in the endcap circuit and the first fast dump of the magnet since underground commissioning. As the rack ventilation units have two turbines, these single turbine failures were tolerated until the next possible access. The water pump survived until the end of the fill after which the circuit was switched to a reserve pump (which in principle is also possible “on the fly”). A faulty position controller of a cryo-valve serving the cryo-power leads caused a spontaneous closure of the valve leading to the fast dump of the magnet. In this case, CMS was lucky once again, since the incident happened on the first ...

  20. TECHNICAL COORDINATION

    CERN Multimedia

    W. Zeuner and A. Ball

    2013-01-01

    LS1 overview In general the LS1 project is progressing well and the workflow is holding to the original December 2012 schedule within two–three weeks, acceptable at this stage, with about 400 work packages already completed. In particular, the critical logistic configuration planned for summer 2013, giving simultaneous access to both ends of the vacuum tank interior and the exterior, plus the YE1 nose zones, was achieved significantly before the deadline at the end of June. The safety awareness of all those working on the CMS detector is currently very satisfactory and the general atmosphere at Point 5 is good, despite many concurrent activities and inevitable last minute adjustments to the day-to-day planning. LS1 services infrastructure work The “once-in-ten years” maintenance of the water-cooling infrastructure has been completed successfully by EN department teams; underground circuits were available again from 12 June. In the shadow of this activity, consolidation and m...

  1. Linac4 Technical Design Report

    CERN Document Server

    Arnaudon, L; Baylac, M; Bellodi, G; Body, Y; Borburgh, J; Bourquin, P; Broere, J; Brunner, O; Bruno, L; Carli, C; Caspers, Friedhelm; Cousineau, S M; Cuvet, Y; De Almeida Martins, C; Dobers, T; Fowler, T; Garoby, R; Gerigk, F; Goddard, B; Hanke, K; Hori, M; Jones, M; Kahle, K; Kalbreier, Willi; Kroyer, T; Küchler, D; Lombardi, A M; López-Hernandez, L A; Magistris, M; Martini, M; Maury, S; Page, E; Paoluzzi, M; Pasini, M; Raich, U; Rossi, C; Royer, J P; Sargsyan, E; Serrano, J; Scrivens, R; Silari, M; Timmins, M; Venturini-Delsolaro, W; Vretenar, M; Wegner, R; Weterings, W; Zickler, T

    2006-01-01

    Linac4 is an H- linear accelerator, intended to replace Linac2 as injector to the PS Booster (PSB). By delivering to the PSB a beam at 160 MeV energy, Linac4 will provide the conditions to double the brightness and intensity of the beam from the PSB, thus removing the first bottleneck towards higher brightness for the LHC and simplifying operation. Moreover, this new linac constitutes an essential component of any of the envisaged LHC upgrade scenarios and could open the way to future extensions of the CERN accelerator complex towards higher performance. This Technical Design Report presents a detailed technical overview of the Linac4 design as it stands at end 2006.

  2. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  3. Technical presentation

    CERN Document Server

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  4. Alternative microbial methods: An overview and selection criteria.

    Science.gov (United States)

    Jasson, Vicky; Jacxsens, Liesbeth; Luning, Pieternel; Rajkovic, Andreja; Uyttendaele, Mieke

    2010-09-01

    This study provides an overview and criteria for the selection of a method, other than the reference method, for microbial analysis of foods. In a first part an overview of the general characteristics of rapid methods available, both for enumeration and detection, is given with reference to relevant bibliography. Perspectives on future development and the potential of the rapid method for routine application in food diagnostics are discussed. As various alternative "rapid" methods in different formats are available on the market, it can be very difficult for a food business operator or for a control authority to select the most appropriate method which fits its purpose. Validation of a method by a third party, according to international accepted protocol based upon ISO 16140, may increase the confidence in the performance of a method. A list of at the moment validated methods for enumeration of both utility indicators (aerobic plate count) and hygiene indicators (Enterobacteriaceae, Escherichia coli, coagulase positive Staphylococcus) as well as for detection of the four major pathogens (Salmonella spp., Listeria monocytogenes, E. coli O157 and Campylobacter spp.) is included with reference to relevant websites to check for updates. In a second part of this study, selection criteria are introduced to underpin the choice of the appropriate method(s) for a defined application. The selection criteria link the definition of the context in which the user of the method functions - and thus the prospective use of the microbial test results - with the technical information on the method and its operational requirements and sustainability. The selection criteria can help the end user of the method to obtain a systematic insight into all relevant factors to be taken into account for selection of a method for microbial analysis. Copyright 2010 Elsevier Ltd. All rights reserved.

  5. 75 FR 23254 - Office of Special Education and Rehabilitative Services; Overview Information; Training and...

    Science.gov (United States)

    2010-05-03

    ... DEPARTMENT OF EDUCATION Office of Special Education and Rehabilitative Services; Overview... special education, early intervention services, transition services, and related services; (iii... Special Education Programs' (OSEP) technical assistance and dissemination centers ( http://www.ed.gov...

  6. Alternative microbial methods: An overview and selection criteria.

    NARCIS (Netherlands)

    Jasson, V.; Jacxsens, L.; Luning, P.A.; Rajkovic, A.; Uyttendaele, M.

    2010-01-01

    This study provides an overview and criteria for the selection of a method, other than the reference method, for microbial analysis of foods. In a first part an overview of the general characteristics of rapid methods available, both for enumeration and detection, is given with reference to relevant

  7. Fims, forestry information management system: An overview

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This geographic information system has been developed as part of Forestry Canada's Eastern Quebec Forestry Program for woodlot owners in eastern Quebec. The goal was to provide private woodlot operators with a management system that uses the most advanced technology available. This booklet provides an overview of this system, explaining how the system can be used.

  8. Exploring the Benefits of Teacher-Modeling Strategies Integrated into Career and Technical Education

    Science.gov (United States)

    Cathers, Thomas J., Sr.

    2013-01-01

    This case study examined how career and technical education classes function using multiple instructional modeling strategies integrated into vocational and technical training environments. Seven New Jersey public school technical teachers received an introductory overview of the investigation and participated by responding to 10 open-end…

  9. 77 FR 20369 - Applications for New Awards; Centers for Independent Living-Training and Technical Assistance

    Science.gov (United States)

    2012-04-04

    ... Education ACTION: Notice. Overview Information Centers for Independent Living--Training and Technical.... Funding Opportunity Description Purpose of Program The purpose of the Training and Technical Assistance grant under the Centers for Independent Living program is to provide training and technical assistance...

  10. Nevada Operations overview

    International Nuclear Information System (INIS)

    Church, B.W.

    1981-01-01

    A brief overview is given of weapon test site decontamination activities carried out by Nevada Operations Office. Tabulated data is given of event name, date, location, year of cleanup, and radioisotopes that were present, activity levels, and cost of cleanup

  11. EURO HAWK Project Overview

    National Research Council Canada - National Science Library

    2003-01-01

    Briefing charts from presentation on a EURO HAWK project overview; an airborne system with stand-off capability for wide-area intelligence, surveillance and reconnaissance meeting European NATO countries' ISR requirements...

  12. Human Reliability Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    Bodin, Michael

    2012-09-25

    This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

  13. Vehicle Technologies Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-09-05

    Overview of the Vehicle Technologies Program including external assessment and market view; internal assessment, program history and progress; program justification and federal role; program vision, mission, approach, strategic goals, outputs, and outcomes; and performance goals.

  14. Research Program Overview

    Science.gov (United States)

    PEER logo Pacific Earthquake Engineering Research Center home about peer news events research products laboratories publications nisee b.i.p. members education FAQs links research Research Program Overview Tall Buildings Initiative Transportation Research Program Lifelines Program Concrete Grand

  15. Overview of Movement Disorders

    Science.gov (United States)

    ... of Delirium Additional Content Medical News Overview of Movement Disorders By Hector A. Gonzalez-Usigli, MD, Professor ... Neurology, HE UMAE Centro Médico Nacional de Occidente; Movement Disorders Clinic, Neurology at IMSS Alberto Espay, MD, ...

  16. Chemical Emergencies Overview

    Science.gov (United States)

    ... Address What's this? Submit What's this? Submit Button Chemical Emergencies Overview Recommend on Facebook Tweet Share Compartir ... themselves during and after such an event. What chemical emergencies are A chemical emergency occurs when a ...

  17. Wind energy program overview

    International Nuclear Information System (INIS)

    1992-02-01

    This overview emphasizes the amount of electric power that could be provided by wind power rather than traditional fossil fuels. New wind power markets, advances in technology, technology transfer, and wind resources are some topics covered in this publication

  18. HAMMLAB 2000 overview

    International Nuclear Information System (INIS)

    Kvalem, J.

    1998-01-01

    In the form of a collection of overheads, this is an overview of HAMMLAB 2000. It also covers project organization, advisory groups, research agenda, status of simulators, status of software systems, VR Centre, Petro Hammlab and physical planning

  19. Nevada Nuclear Waste Storage Investigations Quality-Assurance Program Plan: management and overview

    International Nuclear Information System (INIS)

    1981-10-01

    This Quality Assurance Program Plan (QAPP) defines the quality assurance program in effect for those activities of the Nevada Nuclear Waste Storage (NNWSI) that are directly controlled by: DOE/NV, the Technical Overview Contractor, and the Quality Assurance Overview Contractor. It is intended as a supplement to the NNWSI-QAP

  20. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  1. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  2. Technical Overview of Ecological Risk Assessment - Analysis Phase: Exposure Characterization

    Science.gov (United States)

    Exposure Characterization is the second major component of the analysis phase of a risk assessment. For a pesticide risk assessment, the exposure characterization describes the potential or actual contact of a pesticide with a plant, animal, or media.

  3. Natural gas vehicles: Technical assessment and overview of world situation

    International Nuclear Information System (INIS)

    Klimstra, J.

    1992-01-01

    In evaluating commercialization prospects for natural gas fuelled vehicles, this paper compares the performance and emission quality of these innovative vehicles with those using conventional fuels - gasoline and diesel fuels. Assessments are made of the state-of-the-art of current technology relative to fuel storage, air/fuel mixture preparation, in cylinder combustion processes and pollution control. The analysis evidences that while natural gas is an excellent fuel for spark ignition engines, in transport applications its use is hampered by large storage volume requirements and weight. Moreover, the air/fuel mixture preparation, combustion process and exhaust-gas cleaning require a greater research and development effort to make this alternative fuel economically and environmentally competitive with conventional fuels

  4. THE SLOAN DIGITAL SKY SURVEY REVERBERATION MAPPING PROJECT: TECHNICAL OVERVIEW

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Yue [Carnegie Observatories, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Brandt, W. N. [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA 16802 (United States); Dawson, Kyle S. [Department of Physics and Astronomy, University of Utah, 115 South 1400 East, Salt Lake City, UT 84112 (United States); Hall, Patrick B. [Department of Physics and Astronomy, York University, Toronto, ON M3J 1P3 (Canada); McGreer, Ian D.; Fan, Xiaohui [Steward Observatory, The University of Arizona, 933 North Cherry Avenue, Tucson, AZ 85721-0065 (United States); Anderson, Scott F. [Astronomy Department, University of Washington, Box 351580, Seattle, WA 98195 (United States); Chen, Yuguang [Department of Astronomy, School of Physics, Peking University, Beijing 100871 (China); Denney, Kelly D. [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Eftekharzadeh, Sarah [Department of Physics and Astronomy, University of Wyoming, 1000 East University Avenue, Laramie, WY 82071 (United States); Gao, Yang [Department of Engineering Physics and Center for Astrophysics, Tsinghua University, Beijing 100084 (China); Green, Paul J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Greene, Jenny E. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States); Ho, Luis C. [Kavli Institute for Astronomy and Astrophysics, Peking University, Beijing 100871 (China); Horne, Keith [SUPA Physics/Astronomy, University of St. Andrews, St. Andrews KY16 9SS (United Kingdom); Jiang, Linhua [School of Earth and Space Exploration, Arizona State University, Tempe, AZ 85287-1504 (United States); Kelly, Brandon C. [Department of Physics, Broida Hall, University of California, Santa Barbara, CA 93107 (United States); and others

    2015-01-01

    The Sloan Digital Sky Survey Reverberation Mapping (SDSS-RM) project is a dedicated multi-object RM experiment that has spectroscopically monitored a sample of 849 broad-line quasars in a single 7 deg{sup 2} field with the SDSS-III Baryon Oscillation Spectroscopic Survey spectrograph. The RM quasar sample is flux-limited to i {sub psf} = 21.7 mag, and covers a redshift range of 0.1 < z < 4.5 without any other cuts on quasar properties. Optical spectroscopy was performed during 2014 January-July dark/gray time, with an average cadence of ∼4 days, totaling more than 30 epochs. Supporting photometric monitoring in the g and i bands was conducted at multiple facilities including the Canada-France-Hawaii Telescope (CFHT) and the Steward Observatory Bok telescope in 2014, with a cadence of ∼2 days and covering all lunar phases. The RM field (R.A., decl. = 14:14:49.00, +53:05:00.0) lies within the CFHT-LS W3 field, and coincides with the Pan-STARRS 1 (PS1) Medium Deep Field MD07, with three prior years of multi-band PS1 light curves. The SDSS-RM six month baseline program aims to detect time lags between the quasar continuum and broad line region (BLR) variability on timescales of up to several months (in the observed frame) for ∼10% of the sample, and to anchor the time baseline for continued monitoring in the future to detect lags on longer timescales and at higher redshift. SDSS-RM is the first major program to systematically explore the potential of RM for broad-line quasars at z > 0.3, and will investigate the prospects of RM with all major broad lines covered in optical spectroscopy. SDSS-RM will provide guidance on future multi-object RM campaigns on larger scales, and is aiming to deliver more than tens of BLR lag detections for a homogeneous sample of quasars. We describe the motivation, design, and implementation of this program, and outline the science impact expected from the resulting data for RM and general quasar science.

  5. THE SLOAN DIGITAL SKY SURVEY REVERBERATION MAPPING PROJECT: TECHNICAL OVERVIEW

    International Nuclear Information System (INIS)

    Shen, Yue; Brandt, W. N.; Dawson, Kyle S.; Hall, Patrick B.; McGreer, Ian D.; Fan, Xiaohui; Anderson, Scott F.; Chen, Yuguang; Denney, Kelly D.; Eftekharzadeh, Sarah; Gao, Yang; Green, Paul J.; Greene, Jenny E.; Ho, Luis C.; Horne, Keith; Jiang, Linhua; Kelly, Brandon C.

    2015-01-01

    The Sloan Digital Sky Survey Reverberation Mapping (SDSS-RM) project is a dedicated multi-object RM experiment that has spectroscopically monitored a sample of 849 broad-line quasars in a single 7 deg 2 field with the SDSS-III Baryon Oscillation Spectroscopic Survey spectrograph. The RM quasar sample is flux-limited to i psf = 21.7 mag, and covers a redshift range of 0.1 < z < 4.5 without any other cuts on quasar properties. Optical spectroscopy was performed during 2014 January-July dark/gray time, with an average cadence of ∼4 days, totaling more than 30 epochs. Supporting photometric monitoring in the g and i bands was conducted at multiple facilities including the Canada-France-Hawaii Telescope (CFHT) and the Steward Observatory Bok telescope in 2014, with a cadence of ∼2 days and covering all lunar phases. The RM field (R.A., decl. = 14:14:49.00, +53:05:00.0) lies within the CFHT-LS W3 field, and coincides with the Pan-STARRS 1 (PS1) Medium Deep Field MD07, with three prior years of multi-band PS1 light curves. The SDSS-RM six month baseline program aims to detect time lags between the quasar continuum and broad line region (BLR) variability on timescales of up to several months (in the observed frame) for ∼10% of the sample, and to anchor the time baseline for continued monitoring in the future to detect lags on longer timescales and at higher redshift. SDSS-RM is the first major program to systematically explore the potential of RM for broad-line quasars at z > 0.3, and will investigate the prospects of RM with all major broad lines covered in optical spectroscopy. SDSS-RM will provide guidance on future multi-object RM campaigns on larger scales, and is aiming to deliver more than tens of BLR lag detections for a homogeneous sample of quasars. We describe the motivation, design, and implementation of this program, and outline the science impact expected from the resulting data for RM and general quasar science

  6. FY 1999 Technical research and development for environmentally friendly and highly efficient energy utilization system. Technical research and development for highly efficient and effective energy utilization (Technical research and development for optimum system designs - Part 3); 1999 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu seika hokokusho. 3. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Research and development program is conducted for the elementary techniques as part of the eco-energy urban project of New Sunshine Project. Described herein are the FY 1999 results for the (techniques for transportation and storage of energy (continued), energy supply and utilization, reducing environmental loads, and designing the optimum systems). The R and D on heat transfer system through the vacuum heat insulation pipes involves fabrication, on a trial basis, the vacuum insulation covers for the vacuum insulation tubes, joints, flanges and valves for the 80A pipes, and the heat loss evaluation test for each item. The R and D on the energy supply and utilization techniques involves the heat transfer systems for a variety of fuels by the highly functional heat pump, and compression/absorption hybrid type heat-utilization system. The hybrid type heat-utilization system simulation results suggest possibility of achieving exergy efficiency of 56% as the development target by use of the new medium. The R and D on the environmental load reduction involves the power-saving type heat pump systems which use a natural coolant. (NEDO)

  7. FY 1999 Technical research and development for environmentally friendly and highly efficient energy utilization system. Technical research and development for highly efficient and effective energy utilization (Technical research and development for optimum system designs - Part 2); 1999 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu seika hokokusho. 2. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Research and development program is conducted for the elementary techniques as part of the eco-energy urban project of New Sunshine Project. Described herein are the FY 1999 results for the (techniques for transportation and storage of energy). The R and D on methanol energy systems involves the R and D on decomposition and synthesis catalyst of methanol and methyl formate for the waste heat sources of relatively low temperature. The R and D on high-efficiency techniques using hydrogen-occluding alloys involves development of heat exchangers of low sensible heat ratio, fabrication of double-effect type MH heat pump cycle devices, and demonstration tests for the system operation. It is found that the heat output of the hydrogen-occluding alloy for high temperature use is 0.18kW/kg at 90 degrees C, and that the alloy can be massively produced. A thermal utilization efficiency COP of 0.68 is obtained for the double-effect type MH heat pump cycles. The R and D on the heat-hydrogen recovery, transportation and utilization techniques involves designs and fabrication on a trial basis of a sensible heat recovery unit. (NEDO)

  8. FY 1999 Technical research and development for environmentally friendly and highly efficient energy utilization system. Technical research and development for highly efficient and effective energy utilization (Technical research and development for optimum system designs - Part 1); 1999 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu seika hokokusho. 1 Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Research and development program is conducted for the elementary techniques as part of the eco-energy urban project of New Sunshine Project. Described herein are the FY 1999 results for the 'techniques for recovery and conversion of unutilized energy'. The R and D on waste heat recovery and conversion for chemical plants designs an internal structure of the 'wetted wall column for shell side as the stripping section' for increasing quantity of heat exchanged inside, and stably operates the bench plant for 100 hours or more. The R and D on thermoelectric power generating systems using low calorie exhaust gases involves development of materials, production of fine particle materials and sinters, and evaluation of their functions, among others. The program for application of the techniques to commercial plants confirms applicability of a 3kg thermoelectric power generating system to automobile coating process. The R and D on systems for thermoelectric recovery of low-temperature waste heat finds cracks on the ceramic plate for the power generating system WATT100, disassembled for repair. (NEDO)

  9. JET ITER-like wall—overview and experimental programme

    International Nuclear Information System (INIS)

    Matthews, G F; Beurskens, M; Loving, A; Kear, M; Mayoral, M-L; Prior, P; Riccardo, V; Watkins, M L; Brezinsek, S; Groth, M; Joffrin, E; Villedieu, E; Neu, R; Rimini, F; Sips, G; Rubel, M; De Vries, P

    2011-01-01

    This paper reports the successful installation of the JET ITER-like wall and the realization of its technical objectives. It also presents an overview of the planned experimental programme which has been optimized to exploit the new wall and other JET enhancements in 2011/12.

  10. Treatment Option Overview (Mycosis Fungoides and the Sezary Syndrome)

    Science.gov (United States)

    ... factors affect prognosis (chance of recovery) and treatment options. The prognosis (chance of recovery ) and treatment options ... or in other parts of the body. Treatment Option Overview Key Points There are different types of ...

  11. Scientific, Technical and Economic Committee for Fisheries (STECF) – Opinion by written procedure – Review of scientific advice for 2013- part I – Advice on stocks in the Baltic Sea

    DEFF Research Database (Denmark)

    The scientific advice on the stocks and fisheries in the Baltic Sea in 2013 evaluated and endorsed by the Scientific, Technical and Economic Committee for Fisheries (STECF) by written procedure in June 2012 on a request by the European Commission......The scientific advice on the stocks and fisheries in the Baltic Sea in 2013 evaluated and endorsed by the Scientific, Technical and Economic Committee for Fisheries (STECF) by written procedure in June 2012 on a request by the European Commission...

  12. Nuclear information: An overview of IAEA's activities

    International Nuclear Information System (INIS)

    Marchesi, I.H.; Konstantinov, L.V.

    1986-01-01

    As stated in this overview of IAEA nuclear information activities the Agency's role in information services is rapidly evolving and multifaceted. The Agency maintains more than 200 computerized files of information. Some 60 of these are part of systems directly related to nuclear activities. Some of these are briefly profiled in this overview such as INIS, the IAEA Nuclear Data Programme, the IAEA Incident Reporting System, the IAEA Energy and Economic Databank, the IAEA Power Reactor Information System, the Nuclear Fuel Cycle Information System, and the International Uranium Geology Information System. Future directions are pointed out. Different ways to upgrade information systems are listed

  13. Lasers In Physical Evidence Examination: An Overview

    Science.gov (United States)

    Menzel, E. R.

    1987-01-01

    A recent application of fluorescence that is perhaps largely unknown outside law enforcement involves the utilization of laser excited fluorescence (LEF) in forensic science. In this overview, the focus is on LEF applicaton to development of latent fingerprints. Other areas of criminalistics, such as document examination and fiber analysis will be dealt with briefly only. To bring the technical reader, who likely has little familiarity with the fingerprint field, up to stream, a historical introduction precedes the description of current procedures for laser detection of latent fingerprints which is followed by a brief outline of current areas of research in the fingerprint area and application of lasers to other types of evidence examination. The overview concludes with an assessment of the current state and utilization growth prognosis of lasers in criminalistics.

  14. Technical innovation and management

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Yang Cheol

    1982-08-15

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  15. Technical innovation and management

    International Nuclear Information System (INIS)

    Yoon, Yang Cheol

    1982-08-01

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  16. Technical Due Diligence

    DEFF Research Database (Denmark)

    Jensen, Per Anker; Varano, Mattia

    2011-01-01

    carried out for buyers or sellers involved in real estate transactions. It can also be part of mergers including real estate and other assets or part of facilities management outsourcing. This paper is based on a case study and an interview survey of companies involved in TDD consulting in Denmark......Technical Due Diligence (TDD) as an evaluation of the performance of constructed facilities has become an important new field of practice for consultants. Before the financial crisis started in autumn 2008 it represented the fastest growing activity in some consulting companies. TDD is mostly...... and Italy during 2009. The research identifies the current practice and compares it with the recommended practice in international guidelines. The current practice is very diverse and could in many cases be improved by a more structured approach and stricter adherence to international guidelines. However...

  17. Framework for technical assessment in JR Maglev

    Energy Technology Data Exchange (ETDEWEB)

    Seki, Akio [Central Japan Railway Co., Tokyo (Japan); Akahoshi, Toru [Central Japan Railway Co., Tokyo (Japan); Furuki, Tsutomu [Railway Technical Research Inst., Tokyo (Japan)

    1995-12-31

    In the course of development of JR Maglev, various technical assessments are carried out at each stage of development by a system management group of a project team in order to achieve goals of development. For the purpose, guidelines for practicality assessment were prepared at design stage. It is now striven to make test plans necessary for the practicality assessment. This assessment will serve for those to be ultimately implemented by Ministry of Transport (MOT). This paper presents an overview of concepts, methods and procedures of the technical assessments especially focused on the practicality assessment in the development of JR Maglev. (orig.)

  18. Smart Grid Technologies in Europe: An Overview

    Directory of Open Access Journals (Sweden)

    Luca Ardito

    2013-01-01

    Full Text Available The old electricity network infrastructure has proven to be inadequate, with respect to modern challenges such as alternative energy sources, electricity demand and energy saving policies. Moreover, Information and Communication Technologies (ICT seem to have reached an adequate level of reliability and flexibility in order to support a new concept of electricity network — the smart grid. In this work, we will analyse the state-of-the-art of smart grids, in their technical, management, security, and optimization aspects. We will also provide a brief overview of the regulatory aspects involved in the development of a smart grid, mainly from the viewpoint of the European Union.

  19. Retail video analytics: an overview and survey

    Science.gov (United States)

    Connell, Jonathan; Fan, Quanfu; Gabbur, Prasad; Haas, Norman; Pankanti, Sharath; Trinh, Hoang

    2013-03-01

    Today retail video analytics has gone beyond the traditional domain of security and loss prevention by providing retailers insightful business intelligence such as store traffic statistics and queue data. Such information allows for enhanced customer experience, optimized store performance, reduced operational costs, and ultimately higher profitability. This paper gives an overview of various camera-based applications in retail as well as the state-ofthe- art computer vision techniques behind them. It also presents some of the promising technical directions for exploration in retail video analytics.

  20. Overview of the advanced photon source

    International Nuclear Information System (INIS)

    Moncton, D.E.; Crosbie, E.; Shenoy, G.K.

    1989-01-01

    The Advanced Photon Source planned for construction at Argonne National Laboratory is based on a low-emittance storage-ring operated at 7 GeV and capable of providing tunable undulator radiation from 4 to 40 keV (using the first and the third harmonics). A technical description of the accelerator facility and the storage ring is presented in this overview, along with a brief summary of the characteristics of radiation that will be available from the insertion devices. Various plans for user access to this national user facility are also given

  1. Overview of the OECD Halden reactor project

    International Nuclear Information System (INIS)

    Vitanza, C.

    2000-01-01

    The OECD Halden Reactor Project is an international network dedicated to enhancing the safety and reliability of nuclear power plants. The project operates under the auspices of the OECD Nuclear Energy Agency and aims at addressing and resolving issues relevant to safety as they emerge in the nuclear community. This paper gives a concise presentation of the project's goals and of its technical infrastructure. The paper also contains a brief overview of results from the ongoing programme and of the main issues contemplated for the next three-year programme period (2000-2002). (author)

  2. Survey of independent inventors: An overview

    Energy Technology Data Exchange (ETDEWEB)

    Whalley, P.

    1992-12-01

    Independent inventors are important but little-researched members of the US technical community. The survey reported on here is the first in modern times to attempt to provide a profile of the US independent inventor that goes beyond a single geographical or organizational locale. The report that follows provides an overview of the demographics, practices and concerns of the modern US inventor as represented by the members of leading US inventor organizations. It is by no means comprehensive but seeks to be indicative of the issues raised in the survey each which will be dealt with more comprehensively in future publications.

  3. An Overview of NASA Automotive Component Reliability Studies

    Science.gov (United States)

    Sampson, Michael J.

    2016-01-01

    The results of NASAs studies into the appropriateness of using US Automotive electronic parts in NASA spaceflight systems will be presented. The first part of the presentation provides an overview of the United States Automotive Electronics Councils AECQ standardization program, the second part provides a summary of the results of NASAs procurement and testing experiences and other lessons learned along with preliminary test results.

  4. An overview of U.S. decommissioning experience -- A basic introduction

    International Nuclear Information System (INIS)

    Boing, L.E.

    1998-01-01

    This paper presents an overview of the US experiences in the decommissioning technical area. Sections included are: (1) an overview of the magnitude of the problem, (2) a review of the US decommissioning process, (3) regulation of decommissioning, (4) regulatory and funding requirements for decommissioning, and (5) a general overview of all on-going and completed decommissioning projects to date in the US. The final section presents a review of some issues in the decommissioning area currently being debated in the technical specialists community

  5. Technical Cooperation Report for 2014. Report by the Director General [Chinese Version

    International Nuclear Information System (INIS)

    2015-06-01

    The Technical Cooperation Report for 2014 is set out in three parts: A — Strengthening the Agency’s Technical Cooperation Activities; B — TC Programme Resources and Delivery; and C — Programme Activities and Achievements in 2014: Regional Overview. Annex 1 describes examples of project activities and achievements in specific thematic areas, and Annex 2 describes the activities of the Programme of Action for Cancer Therapy. Annex 3 presents the TC programme Fields of Activity, grouped for reporting purposes. Part A is composed of two sections. Part A.1 provides an overview of the Agency’s technical cooperation (TC) activities in 2014. The first section is devoted to the global development context, and highlights the importance of the post-2015 development agenda, and the value of the Sustainable Development Goals’ programmatic framework for the Agency’s technical cooperation activities. The section then describes how the programme is tailored to respond to the specific needs and priorities of each region, focusing on efforts to develop human resources and build capacities in the peaceful application of nuclear science and technology, including through postgraduate training courses, assistance in drafting legislation, distance learning initiatives and technical cooperation among developing countries. The section also presents a snapshot of TC projects that address radioactive waste management, reflecting the topic of the 2014 Scientific Forum. Part A.2 focuses on efforts to build a more efficient and effective TC programme, in particular on efforts to strengthen the Country Programme Framework template. The section reviews progress made in 2014 in establishing and operationalizing partnerships with the United Nations and other relevant international and regional organizations. This section closes with an overview of actions undertaken in 2014 to continually improve the TC programme, notably through training in the Logical Framework Approach, and

  6. Technical Cooperation Report for 2014. Report by the Director General [Arabic Version

    International Nuclear Information System (INIS)

    2015-06-01

    The Technical Cooperation Report for 2014 is set out in three parts: A — Strengthening the Agency’s Technical Cooperation Activities; B — TC Programme Resources and Delivery; and C — Programme Activities and Achievements in 2014: Regional Overview. Annex 1 describes examples of project activities and achievements in specific thematic areas, and Annex 2 describes the activities of the Programme of Action for Cancer Therapy. Annex 3 presents the TC programme Fields of Activity, grouped for reporting purposes. Part A is composed of two sections. Part A.1 provides an overview of the Agency’s technical cooperation (TC) activities in 2014. The first section is devoted to the global development context, and highlights the importance of the post-2015 development agenda, and the value of the Sustainable Development Goals’ programmatic framework for the Agency’s technical cooperation activities. The section then describes how the programme is tailored to respond to the specific needs and priorities of each region, focusing on efforts to develop human resources and build capacities in the peaceful application of nuclear science and technology, including through postgraduate training courses, assistance in drafting legislation, distance learning initiatives and technical cooperation among developing countries. The section also presents a snapshot of TC projects that address radioactive waste management, reflecting the topic of the 2014 Scientific Forum. Part A.2 focuses on efforts to build a more efficient and effective TC programme, in particular on efforts to strengthen the Country Programme Framework template. The section reviews progress made in 2014 in establishing and operationalizing partnerships with the United Nations and other relevant international and regional organizations. This section closes with an overview of actions undertaken in 2014 to continually improve the TC programme, notably through training in the Logical Framework Approach, and

  7. Technical Cooperation Report for 2014. Report by the Director General [Spanish Version

    International Nuclear Information System (INIS)

    2015-06-01

    The Technical Cooperation Report for 2014 is set out in three parts: A — Strengthening the Agency’s Technical Cooperation Activities; B — TC Programme Resources and Delivery; and C — Programme Activities and Achievements in 2014: Regional Overview. Annex 1 describes examples of project activities and achievements in specific thematic areas, and Annex 2 describes the activities of the Programme of Action for Cancer Therapy. Annex 3 presents the TC programme Fields of Activity, grouped for reporting purposes. Part A is composed of two sections. Part A.1 provides an overview of the Agency’s technical cooperation (TC) activities in 2014. The first section is devoted to the global development context, and highlights the importance of the post-2015 development agenda, and the value of the Sustainable Development Goals’ programmatic framework for the Agency’s technical cooperation activities. The section then describes how the programme is tailored to respond to the specific needs and priorities of each region, focusing on efforts to develop human resources and build capacities in the peaceful application of nuclear science and technology, including through postgraduate training courses, assistance in drafting legislation, distance learning initiatives and technical cooperation among developing countries. The section also presents a snapshot of TC projects that address radioactive waste management, reflecting the topic of the 2014 Scientific Forum. Part A.2 focuses on efforts to build a more efficient and effective TC programme, in particular on efforts to strengthen the Country Programme Framework template. The section reviews progress made in 2014 in establishing and operationalizing partnerships with the United Nations and other relevant international and regional organizations. This section closes with an overview of actions undertaken in 2014 to continually improve the TC programme, notably through training in the Logical Framework Approach, and

  8. Physics Survey Overview

    International Nuclear Information System (INIS)

    2002-01-01

    An overview of a series of assignments of the branches of physics carried out by the Board on Physics and Astronomy of the National Research Council. It identifies further theories in physics and makes recommendations on preventive priorities. The Board on Physics and Astronomy (BPA) has conducted a new decadal survey of physics entitled ''Physics in a New Era''. The survey includes assessments of the main branches of physics as well as certain selected emerging areas. The various elements of the survey were prepared by separately-appointed National Research Council (NRC) committees. The BPA formed the Physics Survey Overview Committee (PSOVC) to complete the survey by preparing an overview of the field of physics to summarize and synthesize the results of the various assessments and to address cross-cutting issues that concern physics as a whole

  9. 1996 ICF program overview

    International Nuclear Information System (INIS)

    Correll, D

    1996-01-01

    The continuing objective of the Inertial Confinement Fusion (ICF) Program is the demonstration of thermonuclear fusion ignition and energy gain in the laboratory. The underlying theme of all ICF activities as a science research and development program is the Department of Energy's (DOE's) Defense Programs (DP) science-based Stockpile Stewardship and Management (SSM) Program. The extension of current program research capabilities in the National Ignition Facility (NIF) is necessary for the ICF Program to satisfy its stewardship responsibilities. ICF resources (people and facilities) are increasingly being redirected in support of the performance, schedule, and cost goals of the NIF. One of the more important aspects of ICF research is the national nature of the program. Lawrence Livermore National Laboratory's (LLNL's) ICF Program falls within DOE's national ICF Program, which includes the Nova and Beamlet laser facilities at LLNL and the OMEGA, Nike, and Trident laser facilities at the University of Rochester (Laboratory for Laser Energetics, UR/LLE), the Naval Research Laboratory (NRL), and Los Alamos National Laboratory (LANL), respectively. The Particle Beam Fusion Accelerator (PBFA) and Saturn pulsed-power facilities are at Sandia National Laboratories (SNL). General Atomics, Inc. (GA) develops and provides many of the targets for the above experimental facilities. LLNL's ICF Program supports activities in two major interrelated areas: (1) target physics and technology (experimental, theoretical, and computational research); and (2) laser science and optics technology development. Experiments on LLNL's Nova laser primarily support ignition and weapons physics research. Experiments on LLNL's Beamlet laser support laser science and optics technology development. In addition, ICF sciences and technologies, developed as part of the DP mission goals, continue to support additional DOE objectives. These objectives are (1) to achieve diversity in energy sources

  10. EPICS system: an overview

    International Nuclear Information System (INIS)

    Bartlett, J.F.; Bobbitt, J.S.; Kramper, B.J.; Lahey, T.E.; MacKinnon, B.A.; West, R.E.

    1984-02-01

    This paper presents an overview of the EPICS control system at FERMILAB. EPICS is a distributed, multi-user, interactive system for the control and monitoring of particle beamlines at a high-energy experimental physics laboratory. The overview discusses the operating environment of the control system, the requirements which determined the design decisions, the hardware and software configurations, and plans for the future growth and enhancement of the present system. This paper is the first of three related papers on the EPICS system. The other two cover (1) the system structure and user interface and (2) RSX implementation issues

  11. Writing Clinic for Business and Technical Writers.

    Science.gov (United States)

    Mercer County Community Coll., Trenton, NJ.

    This document offers brief lesson plans for four courses: (1) an 8-hour refresher course for employees who write memos, short reports, and letters; (2) an 8-hour refresher course on creating a short document; (3) a 16-hour course on technical manual writing; and (4) an 8-hour course on technical manual writing. The courses were part of a workplace…

  12. Guidelines for writing user friendly technical specifications

    International Nuclear Information System (INIS)

    Webster, S.A.; Braun, J.C.; Pearce, R.T.

    1986-01-01

    This study investigates some of the ergonomic considerations of writer's guides for the preparation of instructions. It is a precedent for the preparation of such a writer's guide for technical specifications for nuclear power plants. This writer's guide will be part of a revision to the industry's standard ANSI/ANS 58.4, Criteria for Technical Specifications for Nuclear Power Stations

  13. Technical writing in the radiologic technology curriculum.

    Science.gov (United States)

    Bell, R

    1979-01-01

    Although courses in technical writing are no longer suggested in the Curriculum Guide for Programs in Radiologic Technology, the writer believes that writing is essential to the growth of the profession and development of the professional. Emphasis is placed on some of the benefits that accrue to students who are exposed to technical writing as part of their technology curriculum.

  14. Pollution prevention opportunity assessment for Technical Art

    International Nuclear Information System (INIS)

    Torres, H.M.

    1995-09-01

    This pollution prevention opportunity assessment was conducted to evaluate Technical Art, which is part of the Technical Communications Department at Sandia National Laboratories/California. It is located in Building 912, Room 138. This assessment documents the processes, identifies the hazardous chemical waste streams generated by these processes, and recommends possible ways to minimize waste

  15. 75 FR 81832 - Technical Service Provider Assistance

    Science.gov (United States)

    2010-12-29

    ... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service 7 CFR Part 652 Technical Service... as of Jan. 1, 2010, on page 565, in Sec. 652.2, the first definition for ``Technical service'' is removed. [FR Doc. 2010-32945 Filed 12-28-10; 8:45 am] BILLING CODE 1505-01-D ...

  16. A monitored retrievable storage facility: Technical background information

    International Nuclear Information System (INIS)

    1991-07-01

    The US government is seeking a site for a monitored retrievable storage facility (MRS). Employing proven technologies used in this country and abroad, the MRS will be an integral part of the federal system for safe and permanent disposal of the nation's high-level radioactive wastes. The MRS will accept shipments of spent fuel from commercial nuclear power plants, temporarily store the spent fuel above ground, and stage shipments of it to a geologic repository for permanent disposal. The law authorizing the MRS provides an opportunity for a state or an Indian tribe to volunteer to host the MRS. The law establishes the Office of the Nuclear Waste Negotiator, who is to seek a state or an Indian tribe willing to host an MRS at a technically-qualified site on reasonable terms, and is to negotiate a proposed agreement specifying the terms and conditions under which the MRS would be developed and operated at that site. This agreement can ensure that the MRS is acceptable to -- and benefits -- the host community. The proposed agreement must be submitted to Congress and enacted into law to become effective. This technical background information presents an overview of various aspects of a monitored retrievable storage facility, including the process by which it will be developed

  17. What You Should Get from a Professionally Oriented Master's Degree Program in Technical Communication.

    Science.gov (United States)

    Carliner, Saul

    1992-01-01

    Cites reasons for pursuing a curriculum in technical communication, lists objectives a program should achieve, and outlines a four-part program that includes theory, professional skills, technical proficiency, and an internship. Lists schools offering programs in technical communication. (SR)

  18. 5 CFR 340.203 - Technical assistance.

    Science.gov (United States)

    2010-01-01

    ... part-time employment practices; (3) Development of special recruitment and selection techniques for...-TIME CAREER EMPLOYMENT (PART-TIME, SEASONAL, ON-CALL, AND INTERMITTENT) Regulatory Requirements-Part-Time Employment § 340.203 Technical assistance. (a) The Office of Personnel Management shall provide...

  19. Supplementing Tribal Culture Using Technical Writing Basics

    Science.gov (United States)

    Tichenor, Stuart

    2008-01-01

    Using technical writing basics, a cohort of Lighthorse Police Officers from the Muscogee (Creek) Nation added to their tribe's cultural history by recording part of their family and clan history as well as documenting their law enforcement careers and education.

  20. Astronomy Books of 1985: The Technical List.

    Science.gov (United States)

    Fraknoi, Andrew

    1986-01-01

    Consists of the second part of the 1985 annotated review of technical books done by the Astronomical Society of the Pacific. This listing was primarily designed for graduate students or research scientists. (TW)

  1. The Hanford Environmental Dose Reconstruction Project: Overview

    International Nuclear Information System (INIS)

    Haerer, H.A.; Freshley, M.D.; Gilbert, R.O.; Morgan, L.G.; Napier, B.A.; Rhoads, R.E.; Woodruff, R.K.

    1990-01-01

    In 1988, researchers began a multiyear effort to estimate radiation doses that people could have received since 1944 at the U.S. Department of Energy's Hanford Site. The study was prompted by increasing concern about potential health effects to the public from more than 40 yr of nuclear activities. We will provide an overview of the Hanford Environmental Dose Reconstruction Project and its technical approach. The work has required development of new methods and tools for dealing with unique technical and communication challenges. Scientists are using a probabilistic, rather than the more typical deterministic, approach to generate dose distributions rather than single-point estimates. Uncertainties in input parameters are reflected in dose results. Sensitivity analyses are used to optimize project resources and define the project's scope. An independent technical steering panel directs and approves the work in a public forum. Dose estimates are based on review and analysis of historical data related to operations, effluents, and monitoring; determination of important radionuclides; and reconstruction of source terms, environmental conditions that affected transport, concentrations in environmental media, and human elements, such as population distribution, agricultural practices, food consumption patterns, and lifestyles. A companion paper in this volume, The Hanford Environmental Dose Reconstruction Project: Technical Approach, describes the computational framework for the work

  2. Virtual Reality: An Overview.

    Science.gov (United States)

    Franchi, Jorge

    1994-01-01

    Highlights of this overview of virtual reality include optics; interface devices; virtual worlds; potential applications, including medicine and archaeology; problems, including costs; current research and development; future possibilities; and a listing of vendors and suppliers of virtual reality products. (Contains 11 references.) (LRW)

  3. Miniature UAVs : An overview

    NARCIS (Netherlands)

    Weimar, P.W.L.; Kerkkamp, J.S.F.; Wiel, R.A.N.; Meiller, P.P.; Bos, J.G.H.

    2014-01-01

    With this book TNO provides an overview of topics related to Miniature Unmanned Aerial Vehicles (MUAVs). Both novices and experts may find this publication valuable. The Netherlands Organisation for Applied Scientific Research TNO conducts research on UAVs and MUAVs, see for example [1], on the

  4. Overview of religions.

    Science.gov (United States)

    Brooks, Nicky

    2004-01-01

    This article provides a brief overview of 9 religions: Christianity, Judaism, Jehovah's Witnesses, The Church of Jesus Christ of Latter-Day Saints, Christian Science, Islam, Hinduism, Sikhism, and Buddhism. Basic information on the origins, language, naming practices, diet, personal hygiene, and dress requirements is provided. For additional information, Web sites for each of these religions are also provided.

  5. ISAF Overview Brief

    Science.gov (United States)

    2011-01-01

    Eager Afghans NEW PA STUDENTS NATO / ISAF UNCLASSIFIED NATO / ISAF UNCLASSIFIED ISAF Overview Brief, MHS Conference 2011 – Attrition, Leader deficit...doctors (male/fem), 2 nurses, 2 midwives. 100k-300k XRAY, surgery, OB, physiotherapy , pediatrician, pharmacist, dentist. 10k-15k An extension of the BHC

  6. Breast Cancer Overview

    Science.gov (United States)

    ... are here Home > Types of Cancer > Breast Cancer Breast Cancer This is Cancer.Net’s Guide to Breast Cancer. Use the menu below to choose the Overview/ ... social workers, and patient advocates. Cancer.Net Guide Breast Cancer Introduction Statistics Medical Illustrations Risk Factors and Prevention ...

  7. Pentaquarks. An experimental overview

    International Nuclear Information System (INIS)

    Barna, D.

    2005-01-01

    Since the recent observation of a pentaquark (Θ + = qqqqq-bar) state (see Nakano et al. (LEPS Collaboration), Phys. Rev. Lett.91 (2003) 012002-1) several positive and negative experimental results have emerged. These results are overviewed, with a trial to find common features among them. (author)

  8. Cascade annealing: an overview

    International Nuclear Information System (INIS)

    Doran, D.G.; Schiffgens, J.O.

    1976-04-01

    Concepts and an overview of radiation displacement damage modeling and annealing kinetics are presented. Short-term annealing methodology is described and results of annealing simulations performed on damage cascades generated using the Marlowe and Cascade programs are included. Observations concerning the inconsistencies and inadequacies of current methods are presented along with simulation of high energy cascades and simulation of longer-term annealing

  9. THX Experiment Overview

    Science.gov (United States)

    Wernet, Mark; Wroblewski, Adam; Locke, Randy; Georgiadis, Nick

    2016-01-01

    This presentation provides an overview of experiments conducted at NASA GRC to provide turbulent flow measurements needed for new turbulence model development and validation. The experiments include particle image velocimetry (PIV) and hot-wire measurements of mean flow velocity and temperature fields, as well as fluctuating components.

  10. Overview of Barth Syndrome

    Science.gov (United States)

    ... users and prospective users. Cookies help us collect important business and technical statistics. The information in the cookies ... of Information Protection Practices -- Periodically, our operations and ... security, confidentiality and quality of our information. Employee Access, ...

  11. System for technical innovation support

    International Nuclear Information System (INIS)

    2011-08-01

    This book lists field of support system, which includes tax, development work, basic research project, industrial technology, information and communications field, energy field, part and materials field, local industry, the small and medium business such as technical development field, and industry-university collaboration like summary of investment and financing support and guarantee, support of manpower such as brain pool and contact Korea, support of technique like development technology and strategy for patent, support on certification such as company and technical goods, purchase support.

  12. String moduli inflation. An overview

    Energy Technology Data Exchange (ETDEWEB)

    Cicoli, Michele [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Quevedo, Fernando [Cambridge Univ. (United Kingdom). DAMTP/CMS; Abdus Salam International Centre for Theoretical Physics, Trieste (Italy)

    2011-06-15

    We present an overview of inflationary models derived from string theory focusing mostly on closed string moduli as inflatons. After a detailed discussion of the {eta}-problem and different approaches to address it, we describe possible ways to obtain a de Sitter vacuum with all closed string moduli stabilised. We then look for inflationary directions and present some of the most promising scenarios where the inflatons are either the real or the imaginary part of Kaehler moduli. We pay particular attention on extracting potential observable implications, showing how most of the scenarios predict negligible gravitational waves and could therefore be ruled out by the Planck satellite. We conclude by briefly mentioning some open challenges in string cosmology beyond deriving just inflation. (orig.)

  13. String moduli inflation. An overview

    International Nuclear Information System (INIS)

    Cicoli, Michele; Quevedo, Fernando

    2011-06-01

    We present an overview of inflationary models derived from string theory focusing mostly on closed string moduli as inflatons. After a detailed discussion of the η-problem and different approaches to address it, we describe possible ways to obtain a de Sitter vacuum with all closed string moduli stabilised. We then look for inflationary directions and present some of the most promising scenarios where the inflatons are either the real or the imaginary part of Kaehler moduli. We pay particular attention on extracting potential observable implications, showing how most of the scenarios predict negligible gravitational waves and could therefore be ruled out by the Planck satellite. We conclude by briefly mentioning some open challenges in string cosmology beyond deriving just inflation. (orig.)

  14. Ground System Survivability Overview

    Science.gov (United States)

    2012-03-27

    Avoidance Blast Mitigation Optimization Customer ILIR RDT&E Funding 5.0 % 0.5% GSS has a proven, technically proficient workforce that meets...Evaluation of Defensive-Aid Suites (ARMED) Common Automatic Fire Extinguishing System ( CAFES ) Transparent Armor Development Ground Combat Vehicle...Survey TRADOC (WFO, CNA, etc) Voice of the Customer Sy st em s En gi ne er in g Publish overarching MIL-STD, design guidelines, technical

  15. Overview criteria for the environmental, safety and health evaluation of remedial action project planning

    International Nuclear Information System (INIS)

    Stenner, R.D.; Denham, D.H.

    1984-10-01

    Overview criteria (i.e., subject areas requiring review) for evaluating remedial action project plans with respect to environmental, safety and health issues were developed as part of a Department of Energy, Office of Operational Safety, technical support project. Nineteen elements were identified as criteria that should be addressed during the planning process of a remedial action (decontamination and decommissioning) project. The scope was interpreted broadly enough to include such environmental, safety and health issues as public image, legal obligation and quality assurance, as well as more obvious concerns such as those involving the direct protection of public and worker health. The nineteen elements are discussed along with suggested ways to use a data management software system to organize and report results

  16. Workshop 97. Part I. Proceedings

    International Nuclear Information System (INIS)

    1996-12-01

    The complete Proceedings, in 4 volumes, contain contributions by staff members of the Czech Technical University in Prague, the Technical University in Brno, and the Technical University (former University of Mining) in Ostrava, covering all branches of science and technology dealt with by the 3 universities. Part I includes contributions in mathematics, physics, engineering informatics and cybernetics, and computers. Out of these, 13 have been input to INIS. (P.A.)

  17. Workshop 97. Part I. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The complete Proceedings, in 4 volumes, contain contributions by staff members of the Czech Technical University in Prague, the Technical University in Brno, and the Technical University (former University of Mining) in Ostrava, covering all branches of science and technology dealt with by the 3 universities. Part I includes contributions in mathematics, physics, engineering informatics and cybernetics, and computers. Out of these, 13 have been input to INIS. (P.A.).

  18. Air quality and climate change, Topic 3 of the Model Inter-Comparison Study for Asia Phase III (MICS-Asia III – Part 1: Overview and model evaluation

    Directory of Open Access Journals (Sweden)

    M. Gao

    2018-04-01

    Full Text Available Topic 3 of the Model Inter-Comparison Study for Asia (MICS-Asia Phase III examines how online coupled air quality models perform in simulating high aerosol pollution in the North China Plain region during wintertime haze events and evaluates the importance of aerosol radiative and microphysical feedbacks. A comprehensive overview of the MICS-Asia III Topic 3 study design, including descriptions of participating models and model inputs, the experimental designs, and results of model evaluation, are presented. Six modeling groups from China, Korea and the United States submitted results from seven applications of online coupled chemistry–meteorology models. Results are compared to meteorology and air quality measurements, including data from the Campaign on Atmospheric Aerosol Research Network of China (CARE-China and the Acid Deposition Monitoring Network in East Asia (EANET. The correlation coefficients between the multi-model ensemble mean and the CARE-China observed near-surface air pollutants range from 0.51 to 0.94 (0.51 for ozone and 0.94 for PM2.5 for January 2010. However, large discrepancies exist between simulated aerosol chemical compositions from different models. The coefficient of variation (SD divided by the mean can reach above 1.3 for sulfate in Beijing and above 1.6 for nitrate and organic aerosols in coastal regions, indicating that these compositions are less consistent from different models. During clean periods, simulated aerosol optical depths (AODs from different models are similar, but peak values differ during severe haze events, which can be explained by the differences in simulated inorganic aerosol concentrations and the hygroscopic growth efficiency (affected by varied relative humidity. These differences in composition and AOD suggest that future models can be improved by including new heterogeneous or aqueous pathways for sulfate and nitrate formation under hazy conditions, a secondary organic aerosol (SOA

  19. Strategy of technical innovation

    International Nuclear Information System (INIS)

    Lee, Ga Jong

    1990-12-01

    This book deals with policy of scientific technique and technical innovation such as research for development and types of technical innovation, historical development and process of technical innovation, economic growth, technology change and investment for research and development, structure and form of technical transfer with the meaning process, from, structure and theory, economic growth and investment of research and development with experiential analysis and case study on strategy of technical innovation in electron and fine chemical industry.

  20. Technical support and emergency centre

    International Nuclear Information System (INIS)

    Bohun, L.; Kapisovsk y, M.

    1997-01-01

    This paper presents technical support and emergency management center which will be on two places: Mochovce NPP Emergency Centre (Technical support center and Support working center) and Reserve Emergency Centre in Levice (Reserve emergency center and Environmental Evaluation Center). The main aims of the emergency management centers are: the management and coordination of all persons and organisations; provision of the all information needed to evaluation of the accident and its mitigation; continuous evaluation of the potential or real radiological consequences; taking measure for an early notification of the governmental bodies and the organizations, warning and protection of the public; and other aims. In the next part the data for technical support and emergency centre are discussed

  1. Technical training - Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 16.5.2006 (May-November course sessions) Technical Training: Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E ACROBAT 7.0 : Utilisation de fichiers PDF 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06 E LabVIEW Base 2 32 27.06-5.07.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-...

  2. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Wednesday 19 November From 9:30 to 17:30 - IT Amphitheatre bldg.31 3-004 2003 Data Transmission Design Seminar - TEXAS INSTRUMENTS The one-day 2003 Data Transmission Design Seminar is part of a series of technical seminars produced by Texas Instruments. This series of seminars will introduce system solutions based on different standards according to their respective requirements. It will include topics containing a blend of basic principles and hands-on application examples, along with layout-guidelines. • Basics and Practical Examples of Data-Transmission • Low Voltage Differential Signaling (LVDS) • Connectivity and PC-based Links • Industrial Interfaces • Parallel Bus Systems and Clock-Distribution-Circuits (CDC) This Seminar will be of interest to hardware designers and system engineers dealing with the realization of system- or board-level interfaces based on various transmission standards. Language: English Free seminar, no registration Organiser: John ...

  3. ITER technical basis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    Following on from the Final Report of the EDA(DS/21), and the summary of the ITER Final Design report(DS/22), the technical basis gives further details of the design of ITER. It is in two parts. The first, the Plant Design specification, summarises the main constraints on the plant design and operation from the viewpoint of engineering and physics assumptions, compliance with safety regulations, and siting requirements and assumptions. The second, the Plant Description Document, describes the physics performance and engineering characteristics of the plant design, illustrates the potential operational consequences foe the locality of a generic site, gives the construction, commissioning, exploitation and decommissioning schedule, and reports the estimated lifetime costing based on data from the industry of the EDA parties.

  4. ITER technical basis

    International Nuclear Information System (INIS)

    2002-01-01

    Following on from the Final Report of the EDA(DS/21), and the summary of the ITER Final Design report(DS/22), the technical basis gives further details of the design of ITER. It is in two parts. The first, the Plant Design specification, summarises the main constraints on the plant design and operation from the viewpoint of engineering and physics assumptions, compliance with safety regulations, and siting requirements and assumptions. The second, the Plant Description Document, describes the physics performance and engineering characteristics of the plant design, illustrates the potential operational consequences foe the locality of a generic site, gives the construction, commissioning, exploitation and decommissioning schedule, and reports the estimated lifetime costing based on data from the industry of the EDA parties

  5. A Theoretical Overview of Currency Crises

    OpenAIRE

    Hongxia, Guo

    2005-01-01

    In the 1980s and 1990s, currency crises occurred frequently in various parts of the world. This paper provides an overview of the currency crises theories, which investigate the cause of these currency crises, the determinant factors of their depth, and the mechanism of their effects on actual economy. Based on the three-generation classification, this paper surveys currency crises theories with focus on the differences among them.

  6. BIOMIMICRY – AN OVERVIEW

    OpenAIRE

    Ivanić, Kasandra-Zorica; Tadić, Zoran; Omazić, Mislav Ante

    2015-01-01

    Biomimicry implies the creative implementation of biological concepts into products. This paper provides a broad overview of the field of biomimicry, and has described the conversion of physiological and organizational solutions from nature into products and services. Implementation and economic efficiency is shown through selected examples. Four examples of successful implementation of nature solutions are the following: Velcro, lotus-effect, structural coloration and tubercles on the fins o...

  7. Overview of TCV results

    Czech Academy of Sciences Publication Activity Database

    Alberti, S.; Amorim, P.; Arnoux, G.; Asp, E.; Behn, R.; Bernard, M.; Blanchard, P.; Bortolon, A.; Bottino, A.; Camenen, Y.; Coda, S.; Curchod, L.; Duval, B.; Fable, E.; Fasoli, A.; Fundameski, W.; Furno, I.; Garcia, E.O.; Gnesin, S.; Goodman, T.; Graves, J.; Gudozhnik, A.; Gulejova, B.; Henderson, M.; Hogge, J. Ph.; Horáček, Jan; Joye, B.; Karpushov, A.; Klimanov, I.; Laqua, H.; Lister, J. B.; Llobet, X.; Madeira, T.; Marinoni, A.; Marki, J.; Martin, Y.; Maslov, M.; Moret, J.-M.; Mueck, A.; Naulin, V.; Nielsen, A.H.; Pavlov, I.; Piffl, Vojtěch; Pitts, R.A.; Pitzschke, A.; Pochelon, A.; Porte, L.; Rasmussen, J.J.; Sauter, O.; Scarabosio, A.; Shidara, H.; Schlatter, C.; Sushkov, A.; Tonetti, G.; Tran, M. Q.; Turri, G.; Udintsev, V.; V´eres, G.; Volpe, F.; Weisen, H.; Zabolotsky, A.; Zuchkova, A.; Zucca, C.

    2008-01-01

    Roč. 48, č. 3 (2008), s. 1-10 ISSN 0029-5515 Institutional research plan: CEZ:AV0Z20430508 Keywords : overview highlights * tokamak TCV * energy and momentum transport * edge physics * H-mode physics * electron cyclotron heating * electron cyclotron current drive physics * density peaking * density peaking Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.730, year: 2008 http://stacks.iop.org/NF/48/034001

  8. Research reactors - an overview

    International Nuclear Information System (INIS)

    West, C.D.

    1997-01-01

    A broad overview of different types of research and type reactors is provided in this paper. Reactor designs and operating conditions are briefly described for four reactors. The reactor types described include swimming pool reactors, the High Flux Isotope Reactor, the Mark I TRIGA reactor, and the Advanced Neutron Source reactor. Emphasis in the descriptions is placed on safety-related features of the reactors. 7 refs., 7 figs., 2 tabs

  9. Overview of CSR codes

    International Nuclear Information System (INIS)

    Bassi, G.; Agoh, T.; Dohlus, M.; Giannessi, L.; Hajima, R.; Kabel, A.; Limberg, T.; Quattromini, M.

    2006-01-01

    Coherent synchrotron radiation (CSR) effects play an important role in accelerator physics. CSR effects can be negative (emittance growth in bunch compressors and microbunching instability) or positive (production of CSR in a controlled way). Moreover, CSR is of interest in other fields such as astrophysics. Only a few simple models have been solved analytically. This motivates the development of numerical procedures. In this review article we overview different numerical methods to study CSR effects

  10. Reader-Centered Technical Writing

    Science.gov (United States)

    Narayanan, M.

    2012-12-01

    Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

  11. Laser fusion program overview

    International Nuclear Information System (INIS)

    Emmett, J.L.

    1977-01-01

    This program is structured to proceed through a series of well defined fusion milestones to proof of the scientific feasibility, of laser fusion with the Shiva Nova system. Concurrently, those key technical areas, such as advanced lasers, which are required to progress beyond proof of feasibility, are being studied. We have identified and quantified the opportunities and key technical issues in military applications, such as weapons effects simulations, and in civilian applications, such as central-station electric power production. We summarize the current status and future plans for the laser fusion program at LLL, emphasizing the civilian applications of laser fusion

  12. Engineering Technical Support Center Annual Report Fiscal Year 2015

    Science.gov (United States)

    The United States Environmental Protection Agency (EPA or Agency) Office of Research and Development (ORD) created the Engineering Technical Support Center (ETSC) in 1987, one of several technical support centers created as part of the Technical Support Project (TSP). ETSC provid...

  13. Workshop 93. Part A

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The aim of the seminar was to present and discuss the latest results obtained in research at the Czech Technical University and collaborating institutions. Part A of the Proceedings contains 99 contributions from the following fields: physical electronics and optics, mathematics, informatics and cybernetics, and materials engineering. Two contributions were selected for INIS. (J.B.).

  14. Machine Parts as Metaphor.

    Science.gov (United States)

    Porter, Gerald

    The connection between Language for Specific Purposes (LSP) and literature is discussed with examples of technical vocabulary drawn from a variety of writers, with particular attention to a sketch by the British dramatist Harold Pinter, "Trouble in the Works," which makes extensive use of the terminology of machine parts. It is noted…

  15. Workshop 93. Part A

    International Nuclear Information System (INIS)

    1993-01-01

    The aim of the seminar was to present and discuss the latest results obtained in research at the Czech Technical University and collaborating institutions. Part A of the Proceedings contains 99 contributions from the following fields: physical electronics and optics, mathematics, informatics and cybernetics, and materials engineering. Two contributions were selected for INIS. (J.B.)

  16. Prospective study related to the evolution of energy distribution networks. Needs of evolution of technical and organisational models of energy distribution networks with respect to energy transition scenarios in the Provence-Alpes-Cote d'Azur region. Part 1 - Hypotheses and perspectives, Part 2 - Needs of network evolution. Study related to the impact of the electric vehicle and of photovoltaic production on electric distribution networks - Case study for Provence-Alpes-Cote d'Azur

    International Nuclear Information System (INIS)

    Dauphin, Francois; Fontaine, Frederick

    2013-02-01

    The first part of this document aims at presenting perspectives of emergence of new energy production, consumption and storage sources, and their impacts on energy (electricity, gas, heat) distribution and transport networks. It is based on two scenarios: the regional climate-air-energy scheme, and the regional Negawatt scenario. The objective was to select a limited number of aspects: solutions enabling an optimal injection of biogas produced in the concerned region, development of photovoltaic energy and electric vehicles and their impact on the balance of medium-voltage and low-voltage networks, and smart grid technologies and their possible impact on the optimisation of electric network management. The second part reports the detailed study of these issues. It more particularly addresses technical impacts of different sectors on electric and gas networks in Provence-Alpes-Cote d'Azur, technical, economic and organisational assets of smart grid technologies, investments policies and implementation planning, and resulting evolutions for energy markets. Related documents published by ERDF and GrDF are provided

  17. 2011 Residential Energy Efficiency Technical Update Meeting Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-11-01

    This report provides an overview of the U.S. Department of Energy Building America program's Summer 2011 Residential Energy Efficiency Technical Update Meeting. This meeting was held on August 9-11, 2011, in Denver, Colorado, and brought together more than 290 professionals representing organizations with a vested interest in energy efficiency improvements in residential buildings.

  18. Technical Assistance Plan (TAP)

    Science.gov (United States)

    A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

  19. Technical report writing

    Science.gov (United States)

    Vidoli, Carol A.

    1992-01-01

    This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

  20. Technical Report Writing Today

    DEFF Research Database (Denmark)

    Riordan, Daniel G.

    2014-01-01

    Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...

  1. Technical training: places available

    CERN Document Server

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  2. Technical training - places available

    CERN Document Server

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  3. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  4. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  5. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  6. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  7. Technical approach to groundwater restoration

    International Nuclear Information System (INIS)

    1993-01-01

    The Technical Approach to Groundwater Restoration (TAGR) provides general technical guidance to implement the groundwater restoration phase of the Uranium Mill Tailings Remedial Action (UMTRA) Project. The TAGR includes a brief overview of the surface remediation and groundwater restoration phases of the UMTRA Project and describes the regulatory requirements, the National Environmental Policy Act (NEPA) process, and regulatory compliance. A section on program strategy discusses program optimization, the role of risk assessment, the observational approach, strategies for meeting groundwater cleanup standards, and remedial action decision-making. A section on data requirements for groundwater restoration evaluates the data quality objectives (DQO) and minimum data required to implement the options and comply with the standards. A section on sits implementation explores the development of a conceptual site model, approaches to site characterization, development of remedial action alternatives, selection of the groundwater restoration method, and remedial design and implementation in the context of site-specific documentation in the site observational work plan (SOWP) and the remedial action plan (RAP). Finally, the TAGR elaborates on groundwater monitoring necessary to evaluate compliance with the groundwater cleanup standards and protection of human health and the environment, and outlines licensing procedures

  8. Delivery of promise of pheromones: Part II

    Science.gov (United States)

    This issue contains the remainder of the reviews and research papers on the topic of using semiochemicals in pest management, but with different topics. It leads off with a review article that presents an overview of the prospects and technical details of using semiochemicals for detection and samp...

  9. Executive Summary - Overview

    International Nuclear Information System (INIS)

    2005-01-01

    Professor Andrzej Budzanowski was Director of IFJ in the years 1990-2004. On September 1st 2004, on IFJ joining the Polish Academy of Sciences, Professor Marek Jezabek has been nominated by the President of PAN as the Director of IFJ, for a 4-year term. Our Institute, with a personnel of 450 (182 research staff) and over 50 Ph.D. students, is presently one of the largest institutes of the Polish Academy of Sciences and one of the largest research institutes in Poland. The scientific staff consists on 120 post-doctoral researchers, 26 Associated Professors and 36 State-Nominated Professors. The total budget of the Institute for the year 2004 was about 56 million Euro. The IFJ is financed mainly from the state budget of the Ministry of Scientific Research and Information Technology. In 2004 this financing was about 4 million Euro, constituting 72% of the Institute's total budget. The remaining part of our 2004 budget came from individual research projects, also sponsored by the Ministry of Scientific Research (688 kEuro), from international projects (368 kEuro) and from the Institute's entrepreneurship activities (498 kEuro). Between 2003 and 2004 we doubled our income from international projects. For further budget information. The Scientific Council of the Institute, which consists of 40 elected members of the Institute's staff and 4 external members (elected representatives from other Polish institutes and universities), is authorized to confer Ph.D. degrees in Physics and related disciplines, and to initiate and conduct habilitation and professorship procedures. In 2003-2004 17 Ph.D. theses and 11 habilitations have been completed. Following their review procedures, 3 Associate Professors at the IFJ became state-nominated Professors, receiving their nominations from Poland's President, Mr. A. Kwasniewski. The Institute is structured into 17 scientific departments which cover the range of our scientific interests. A summary of our main scientific achievements in

  10. VISIR upgrade overview and status

    Science.gov (United States)

    Kerber, Florian; Käufl, Hans Ulrich; Baksai, Pedro; Dobrzycka, Danuta; Finger, Gert; Ives, Derek; Jakob, Gerd; Lagadec, Eric; Lundin, Lars; Mawet, Dimitri; Mehrgan, Leander; Moerchen, Margaret; Momany, Yazan; Moreau, Vincent; Pantin, Eric; Riquelme, Miguel; Siebenmorgen, Ralf; Silber, Armin; Smette, Alain; Taylor, Julian; van den Ancker, Mario; Venema, Lars; Weilenmann, Ueli; Yegorova, Irina

    2012-09-01

    We present an overview of the VISIR upgrade project. VISIR is the mid-infrared imager and spectrograph at ESO's VLT. The project team is comprised of ESO staff and members of the original VISIR consortium: CEA Saclay and ASTRON. The project plan is based on input from the ESO user community with the goal of enhancing the scientific performance and efficiency of VISIR by a combination of measures: installation of improved hardware, optimization of instrument operations and software support. The cornerstone of the upgrade is the 1k by 1k Si:As Aquarius detector array (Raytheon) which has demonstrated very good performance (sensitivity, stability) in the laboratory IR detector test facility (modified TIMMI 2 instrument). A prism spectroscopic mode will cover the N-band in a single observation. New scientific capabilities for high resolution and high-contrast imaging will be offered by sub-aperture mask (SAM) and phase-mask coronagraphic (4QPM/AGPM) modes. In order to make optimal use of favourable atmospheric conditions a water vapour monitor has been deployed on Paranal, allowing for real-time decisions and the introduction of a userdefined constraint on water vapour. Improved pipelines based on the ESO Reflex concept will provide better support to astronomers. The upgraded VISIR will be a powerful instrument providing background limited performance for diffraction-limited observations at an 8-m telescope. It will offer synergy with facilities such as ALMA, JWST, VLTI and SOFIA, while a wealth of targets is available from survey work (e.g. VISTA, WISE). In addition it will bring confirmation of the technical readiness and scientific value of several aspects of potential mid-IR instrumentation at Extremely Large Telescopes. The intervention on VISIR and installation of hardware has been completed in July and commissioning will take place during July and August. VISIR is scheduled to be available to the users starting Oct 2012.

  11. Handbook of Technical Communication

    OpenAIRE

    Mehler , Alexander; Romary , Laurent; Gibbon , Dafydd

    2012-01-01

    International audience; The handbook "Technical Communication" brings together a variety of topics which range from the role of technical media in human communication to the linguistic, multimodal enhancement of present-day technologies. It covers the area of computer-mediated text, voice and multimedia communication as well as of technical documentation. In doing so, the handbook takes professional and private communication into account. Special emphasis is put on technical communication bas...

  12. Biogeochemical processes in a clay formation in situ experiment: Part A - Overview, experimental design and water data of an experiment in the Opalinus Clay at the Mont Terri Underground Research Laboratory, Switzerland

    Energy Technology Data Exchange (ETDEWEB)

    Wersin, P., E-mail: paul.wersin@gruner.ch [NAGRA, Hardstrasse 73, 5430 Wettingen (Switzerland)] [Gruner Ltd., Gellertstrasse 55, 4020 Basel (Switzerland); Leupin, O.X. [NAGRA, Hardstrasse 73, 5430 Wettingen (Switzerland); Mettler, S. [NAGRA, Hardstrasse 73, 5430 Wettingen (Switzerland)] [Solexperts Ltd., Mettlenbachstrasse 25, 8617 Moenchaltorf (Switzerland); Gaucher, E.C. [BRGM, 3 avenue Claude Guillemin, B.P. 36009, 45060 Orleans Cedex 2 (France); Maeder, U. [University of Bern, Institute of Geological Sciences, Baltzerstrasse 3, CH-3012 Bern (Switzerland); De Canniere, P. [SCK.CEN, Waste and Disposal Project, Boeretang 200, 2400 Mol (Belgium); Vinsot, A. [ANDRA, Laboratoire de Recherche Souterrain de Meuse/Haute-Marne, RD960 BP9, 55290 Bure (France); Gaebler, H.E. [BGR, Stilleweg 2, 30655 Hannover (Germany); Kunimaro, T. [JAEA, Tokai-mura, Naka-gun, Ibaraki 319-1195 (Japan); Kiho, K. [CRIEPI, 1646 Abiko, Abiko-city Chiba 270-1194 (Japan); Eichinger, L. [Hydroisotop, 85301 Schweitenkirchen (Germany)

    2011-06-15

    Highlights: > The composition was affected by the complex interplay of diffusion, mineral and surface reactions. > The {sup 13}C signals for carbon species showed significant variations which could only be partly explained. > The main cations remained remarkably constant during the experiment. > This underlines the strong buffering via cation exchange and carbonate dissolution/precipitation. - Abstract: An in situ test in the Opalinus Clay formation, termed porewater chemistry (PC) experiment, was carried out for a period of 5 years. It was based on the concept of diffusive equilibration whereby a traced water with a composition close to that expected in the formation was continuously circulated and monitored in a packed-off borehole. The main original focus was to obtain reliable data on the pH/pCO{sub 2} conditions of the porewater, but because of unexpected microbiologically-induced redox reactions, the objective was extended to elucidate the biogeochemical processes occurring in the borehole and to understand their impact on pH/pCO{sub 2} and porewater chemistry in the low permeability clay formation. The behaviour of the conservative tracers {sup 2}H and Br{sup -} could be explained by diffusive dilution in the clay and moreover the results showed that diffusive equilibration between the borehole water and the formation occurred within about 3 year's time. However, the composition and pH/pCO{sub 2} conditions differed considerably from those of the in situ porewater. Thus, pH was lower and pCO{sub 2} was higher than indicated by complementary laboratory investigations. The noted differences are explained by microbiologically-induced redox reactions occurring in the borehole and in the interfacial wall area which were caused by an organic source released from the equipment material. The degradation of this source was accompanied by sulfate reduction and - to a lesser extent - by methane generation, which induced a high rate of acetogenic reactions

  13. Biogeochemical processes in a clay formation in situ experiment: Part A - Overview, experimental design and water data of an experiment in the Opalinus Clay at the Mont Terri Underground Research Laboratory, Switzerland

    International Nuclear Information System (INIS)

    Wersin, P.; Leupin, O.X.; Mettler, S.; Gaucher, E.C.; Maeder, U.; De Canniere, P.; Vinsot, A.; Gaebler, H.E.; Kunimaro, T.; Kiho, K.; Eichinger, L.

    2011-01-01

    Highlights: → The composition was affected by the complex interplay of diffusion, mineral and surface reactions. → The 13 C signals for carbon species showed significant variations which could only be partly explained. → The main cations remained remarkably constant during the experiment. → This underlines the strong buffering via cation exchange and carbonate dissolution/precipitation. - Abstract: An in situ test in the Opalinus Clay formation, termed porewater chemistry (PC) experiment, was carried out for a period of 5 years. It was based on the concept of diffusive equilibration whereby a traced water with a composition close to that expected in the formation was continuously circulated and monitored in a packed-off borehole. The main original focus was to obtain reliable data on the pH/pCO 2 conditions of the porewater, but because of unexpected microbiologically-induced redox reactions, the objective was extended to elucidate the biogeochemical processes occurring in the borehole and to understand their impact on pH/pCO 2 and porewater chemistry in the low permeability clay formation. The behaviour of the conservative tracers 2 H and Br - could be explained by diffusive dilution in the clay and moreover the results showed that diffusive equilibration between the borehole water and the formation occurred within about 3 year's time. However, the composition and pH/pCO 2 conditions differed considerably from those of the in situ porewater. Thus, pH was lower and pCO 2 was higher than indicated by complementary laboratory investigations. The noted differences are explained by microbiologically-induced redox reactions occurring in the borehole and in the interfacial wall area which were caused by an organic source released from the equipment material. The degradation of this source was accompanied by sulfate reduction and - to a lesser extent - by methane generation, which induced a high rate of acetogenic reactions corresponding to very high acetate

  14. [25 Years After Re-Unification of Germany: An Overview on Eastern German Psychiatry. Part 1: Post-War Era, Pavlovization, Psychopharmacological Era and Social Psychiatric Reform Movement].

    Science.gov (United States)

    Steinberg, H

    2016-04-01

    This is the first of a 2-part study on the history of psychiatry in Eastern Germany, i. e. the Soviet Occupied Zone and later German Democratic Republic. It mainly covers the years post World War II up until the beginning of the 1970s. The first post-war years were determined by the new power holders' attempts to overcome National Socialist (Nazi) heritage and to re-organize mental health and care in general. The doctrine of a strict denazifization in East Germany must, however, be regarded as a myth. Promoted by centralized organization, there was an increase in communist party-ideological influence and harassment as well as aligning scientific views and research with Soviet paradigms (Pavlovization) during the 1950s and early 1960s. This, however, led to an enormous rise in exodus of skilled labor to West Germany, which in turn further increased the notorious lack of staff. After the erection of the inner-German wall, this problem was mitigated, yet never fully solved over the 40 years of the existence of the GDR. Despite adverse conditions, East German psychiatrists made major original contributions to the development of psychiatry in general, at least up until the 1960s. Academic psychiatry was mainly based on biological concepts that were further promoted by new somatic and psychopharmacological therapeutic options. In the 1960s, social psychiatric reformist forces emerged, primarily in the large psychiatric hospitals. The improvements achieved by these forces, however, were not implemented on a nation-wide scale, but mainly restricted to one particular or several institutions. © Georg Thieme Verlag KG Stuttgart · New York.

  15. Health Physics Laboratory - Overview

    International Nuclear Information System (INIS)

    Olko, P.

    1999-01-01

    (RACE - Rapid Assessment of aCcidental Exposures) based on ultra-sensitive MCP-N detectors developed at the laboratory. In 1998 a technical project concerned with refurbishing the calibration laboratory for radiation protection was also completed. A new irradiation assembly with a high-intensity Cs-137 source, an automatic dosimetric bench and a high-class ionisation chamber with electrometer were installed and put in operation. They allow one to precisely calibrate personal dosimeters and radiation protection monitors. The investigations of the concentration of radon in houses and in soil using CR-39 plastic detectors, were continued together with the group of Prof. Jerzy Loskiewicz. The Laboratory successfully took part in the intercomparison of passive radon detectors (3% deviation, 9th place out of 70 participants) organised in NRPB, Great Britain. Several of the research projects involved measurements and detector irradiation in collaborating laboratories abroad and visits by foreign experts. The TLD detectors were irradiated in the medical proton beam at the Hahn-Meitner Institute in Berlin in ISL laboratory. The response of MCP-N detectors after low-energy X-rays from a synchrotron light source was investigated with the chips exposed at Stanford (USA). LiF:Mg, Ti detectors with different concentration of Ti and Mg were prepared for experiments in the medical proton beam at Louvain, Belgium. Dr Barbara Marczewska continued her study of TL materials based on CaF 2 :Tm. We plan to use CaF 2 :Tm detectors in measurements of doses in proton beams

  16. National Profiles in Technical and Vocational Education in Asia and the Pacific: Indonesia.

    Science.gov (United States)

    United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

    This technical and vocational education (TVE) profile on Indonesia is one in a series of profiles of UNESCO member countries. It is intended to be a handy reference on TVE systems, staff development, technical cooperation, and information networking. A two-page overview lists TVE goals, outlines the structure and governance, and lists the six…

  17. Environmental geotechnics in the US region: a brief overview

    OpenAIRE

    Hoyos, LR; DeJong, JT; McCartney, JS; Puppala, AJ; Reddy, KR; Zekkos, D

    2015-01-01

    The present contribution to the Regional Editors themed issue offers a concise yet focused overview of some of the key technical and scientific issues, as well as of current trends and future challenges, related to the broad discipline of environmental geotechnics in the US region. Particular attention is devoted to current policy and societal drivers as well as future professional and research capacity requirements in critical areas such as innovative recycling and improvement of compost, co...

  18. Fatigue and fracture: Overview

    Science.gov (United States)

    Halford, G. R.

    1984-01-01

    A brief overview of the status of the fatigue and fracture programs is given. The programs involve the development of appropriate analytic material behavior models for cyclic stress-strain-temperature-time/cyclic crack initiation, and cyclic crack propagation. The underlying thrust of these programs is the development and verification of workable engineering methods for the calculation, in advance of service, of the local cyclic stress-strain response at the critical life governing location in hot section compounds, and the resultant crack initiation and crack growth lifetimes.

  19. Oily skin: an overview.

    Science.gov (United States)

    Sakuma, Thais H; Maibach, Howard I

    2012-01-01

    Oily skin (seborrhea) is a common cosmetic problem that occurs when oversized sebaceous glands produce excessive amounts of sebum giving the appearance of shiny and greasy skin. This paper overviews the main concepts of sebaceous gland anatomy and physiology, including the biosynthesis, storage and release of sebum, as well as its relationship to skin hydration and water barrier function. We also address how skin oiliness may vary according to diet, age, gender, ethnicity and hot humid climates. The deeper understanding of this skin type provides the opportunity to better guide patients regarding skin care and also assist in the development of sebosuppressive agents. Copyright © 2012 S. Karger AG, Basel.

  20. Pathological gambling: An overview

    Directory of Open Access Journals (Sweden)

    Shalini Singh

    2017-01-01

    Full Text Available Gambling activities are popular as a form of recreation and have been a source of income for many people worldwide. Although gambling has been common across continents and time, and a subset of individuals experience problems with gambling. This review attempts to provide an overview of problem gambling for clinicians who are likely to encounter such patients in their practice. The review discusses the relevance, nosology, and epidemiology of gambling. We also discuss the associated comorbidities and principles of management of pathological gambling.

  1. Theory overview on spectroscopy

    International Nuclear Information System (INIS)

    Ali, Ahmed

    2011-08-01

    A theoretical overview of the exotic spectroscopy in the charm and beauty quark sector is presented. These states are unexpected harvest from the e + e - and hadron colliders and a permanent abode for the majority of them has yet to be found. We argue that some of these states, in particular the Y b (10890) and the recently discovered states Z b (10610) and Z b (10650), discovered by the Belle collaboration are excellent candidates for tetraquark states [bq][ anti b anti q], with q=u,d light quarks. Theoretical analyses of the Belle data carried out in the tetraquark context is reviewed. (orig.)

  2. Economic Sanctions Overview

    Directory of Open Access Journals (Sweden)

    Marian Dent

    2015-01-01

    Full Text Available The Sanctions Seminar held on November 19 was organized by LexisNexis Russia in cooperation with ANO Pericles.The Seminar theme was ‘Economic Sanctions Overview: Due Diligence and AML Procedures.’ In the course of the seminar, practicing lawyers, compliance and AML professionals had the opportunity to interact on the scope of US A and EU Sanctions and their impact on global business transaction, as well as get a better understanding of the due diligence procedures necessary in order to comply with a such complex environment.

  3. Pharmaceutical cocrystals: an overview.

    Science.gov (United States)

    Qiao, Ning; Li, Mingzhong; Schlindwein, Walkiria; Malek, Nazneen; Davies, Angela; Trappitt, Gary

    2011-10-31

    Pharmaceutical cocrystals are emerging as a new class of solid drugs with improved physicochemical properties, which has attracted increased interests from both industrial and academic researchers. In this paper a brief and systematic overview of pharmaceutical cocrystals is provided, with particular focus on cocrystal design strategies, formation methods, physicochemical property studies, characterisation techniques, and recent theoretical developments in cocrystal screening and mechanisms of cocrystal formations. Examples of pharmaceutical cocrystals are also summarised in this paper. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. Overview of particle physics

    International Nuclear Information System (INIS)

    Salam, A.

    1993-01-01

    This article presents an overview of the situation in particle physics and a prognosis of its future: ideas which have been tested or will soon be tested (standard model and the light Higgs particle), ideas whose time has not yet come (supersymmetry, supersymmetry and N=1 supergravity, right-left symmetry and preons, unification of gravity with other forces, anomaly-free supergravities, supersymmetry strings, string theory as the ''Theory of Everything'' (T.O.E.); passive and non accelerator experiments. 6 figs., 2 tabs

  5. NREL biofuels program overview

    Energy Technology Data Exchange (ETDEWEB)

    Mielenz, J.R. [National Renewable Energy Laboratory, Golden, CO (United States)

    1996-09-01

    The NREL Biofuels Program has been developing technology for conversion of biomass to transportation fuels with support from DOE Office of Transportation Technologies Biofuels System Program. This support has gone to both the National Renewable Energy Laboratory, and over 100 subcontractors in universities and industry. This overview will outline the value of the Biofuels development program to the Nation, the current status of the technology development, and what research areas still need further support and progress for the development of a biofuels industry in the US.

  6. Overview of Tokamak Results

    International Nuclear Information System (INIS)

    Unterberg, Bernhard; Samm, Ulrich

    2004-01-01

    An overview is given of recent results obtained in tokamak devices. We introduce basic confinement scenarios as L-mode, H-mode and plasmas with an internal transport barrier and discuss methods for profile control. Important findings in DT-experiments at JET as α-particle heating are described. Methods for power exhaust like plasma regimes with a radiating mantle and radiative divertor scenarios are discussed. The overall impact of plasma edge conditions on the general plasma performance in tokamaks is illustrated by describing the impact of wall conditions on confinement and the edge operational diagram of H-mode plasmas

  7. Overview on pentaquarks

    CERN Document Server

    Dey, Biplab

    2017-01-01

    An overview of the exotic pentaquark states is provided, from early searches in $KN$ scattering experiments in the 1970’s to the now-debunked $\\Theta^+(1540)$ in the early 2000’s, to the discovery two resonances consistent with pentaquark states by LHCb in 2015. We review the full angular analysis of $\\Lambda^0_b \\to J/ \\psi K^-p$ that led to affirmation of the resonant nature of the $P^+_c (4450)$ and $P^+_c (4380)$ pentaquark candidates. We summarize the latest results, ongoing work and future prospects for other pentaquark searches at LHCb.

  8. International Linear Collider Technical Design Report (Volumes 1 through 4)

    Energy Technology Data Exchange (ETDEWEB)

    Harrison M.

    2013-03-27

    The design report consists of four volumes: Volume 1, Executive Summary; Volume 2, Physics; Volume 3, Accelerator (Part I, R and D in the Technical Design Phase, and Part II, Baseline Design); and Volume 4, Detectors.

  9. Internal combustion engines for alcohol motor fuels: a compilation of background technical information

    Energy Technology Data Exchange (ETDEWEB)

    Blaser, Richard

    1980-11-01

    This compilation, a draft training manual containing technical background information on internal combustion engines and alcohol motor fuel technologies, is presented in 3 parts. The first is a compilation of facts from the state of the art on internal combustion engine fuels and their characteristics and requisites and provides an overview of fuel sources, fuels technology and future projections for availability and alternatives. Part two compiles facts about alcohol chemistry, alcohol identification, production, and use, examines ethanol as spirit and as fuel, and provides an overview of modern evaluation of alcohols as motor fuels and of the characteristics of alcohol fuels. The final section compiles cross references on the handling and combustion of fuels for I.C. engines, presents basic evaluations of events leading to the use of alcohols as motor fuels, reviews current applications of alcohols as motor fuels, describes the formulation of alcohol fuels for engines and engine and fuel handling hardware modifications for using alcohol fuels, and introduces the multifuel engines concept. (LCL)

  10. Innovative technical plasma applications

    International Nuclear Information System (INIS)

    Wintner, E.

    2013-01-01

    Plasma is the predominant status of matter, in stars as well as in interstellar space. In science, it was only recognized rather late as a specific (fourth) state of matter: Sir William Crookes described it in 1879 as “radiant matter”, Irving Langmuir created the name “plasma” in 1928. Technically generated plasma is employed very broadly in modern technology. Some examples are Plasma Displays, Fluorescent Lamps (also the modern Energy Saving Lamps), Corona Discharges (for e.g. Ozone generation, or even engine ignition), arc welding and cutting, reactive ion etching, mass spectroscopy, ion rocket engines and many more. Very early since the development of the laser, it was also employed to generate a plasma (spark) in air or on surfaces. Generally, for this purpose at least ns (“Giant”) pulses have to be used. In more recent times, pico- and femtosecond pulses have allowed to create plasma very easily and effectively. Laser fusion may represent the ultimate application in this direction, based on highly amplified ns pulses for inertial confinement or ps pulses designed as fast igniter. The idea of employing laser pulses for the ignition of engines was attempted for the first time in 1978, although with inadequate tools like the CO2 laser. After a long time of inactivity in this field, about 10 years ago a few institutions like Vienna University of Technology first resumed this approach with the help of modern type solid-state lasers and started systematic investigations around the idea of laser ignition of internal combustion engines. Now, this technique has reached a high degree of maturity; remaining problems lie on the development level and are to be solved soon. Ambitious product development by leading engine producers or ignition equipment suppliers has been started world-wide since several years and, as a result, in one or two years laser ignition will probably be imple-mented into high power gas engines or, somewhat later, high-priced automotive

  11. Teaching Technical Writing - Towards Technical Writing

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2000-01-01

    In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm that ...... of technical writing.......In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm...... that used to govern what the quality of an LSP text should be as opposed to the standpoint, which I advocate. By way of summing up, I will show how a university curriculum is designed so that - upon graduation - the technical translator could also be methodological quite well suited to take on the challenge...

  12. Iranian nurses' experience of essential technical competences in disaster response: A qualitative content analysis study.

    Science.gov (United States)

    Aliakbari, Fatemeh; Bahrami, Masoud; Aein, Fereshteh; Khankeh, Hamidreza

    2014-11-01

    Today disasters are a part of many people's lives. Iran has a long history of disaster events and nurses are one of the most significant groups within the Iranian disaster relief operations, providing immediate and long-term care for those affected by the disaster. However, the technical competence of Iranian nurses and their training for this work has received little attention. This article presents the results of a study that aims to explore this context. A qualitative study was conducted using in-depth interviews to collect data from 30 nurses, who were deliberately selected from the health centers affiliated to the Isfahan University of Medical Sciences. Themes were identified using the conventional qualitative content analysis. The trustworthiness of the study was supported by considering the auditability, neutrality, consistency, and transferability. The study lasted from 2011 to 2012. Data analysis undertaken for the qualitative study resulted in the identification of five main themes, which included: (1) Management competences, (2) ethical and legal competences, (3) team working, and (4) personal abilities and the specific technical competences presented in this report. This report presents an overview of the nursing technical capabilities required for Iranian nurses during disaster relief. It is argued that additional competencies are required for nurses who care in high-risk situations, including disasters. Nurses need to prepare themselves more effectively to be responsible and effective in nursing care.

  13. Technical rules in law

    Energy Technology Data Exchange (ETDEWEB)

    Debelius, J

    1978-08-01

    An important source of knowledge for technical experts is the state of the art reflected by catalogues of technical rules. Technical rules may also achieve importance in law due to a legal transformation standard. Here, rigid and flexible reference are controversial with regard to their admissibility from the point of view of constitutional law. In case of a divergence from the generally accepted technical rules, it is assumed - refutably - that the necessary care had not been taken. Technical rules are one out of several sources of information; they have no normative effect. This may result in a duty of anyone applying them to review the state of technology himself.

  14. Technical rules in law

    International Nuclear Information System (INIS)

    Debelius, J.

    1978-01-01

    An important source of knowledge for technical experts is the state of the art reflected by catalogues of technical rules. Technical rules may also achieve importance in law due to a legal transformation standard. Here, rigid and flexible reference are controversial with regard to their admissibility from the point of view of constitutional law. In case of a divergence from the generally accepted technical rules, it is assumed - refutably - that the necessary care had not been taken. Technical rules are one out of several sources of information; they have no normative effect. This may result in a duty of anyone applying them to review the state of technology himself. (orig.) [de

  15. Historical overview of imaging the meibomian glands

    Directory of Open Access Journals (Sweden)

    William Ngo

    2013-01-01

    Full Text Available Growing knowledge of the role of the meibomian glands in dry eye disease and contact lens discomfort has resulted in a surge of interest in visualizing these glands within the eyelids. This manuscript provides an overview of the many different visualization methods that have evolved over the past 30–40 years. Some of the visualization methods covered in this review include lid transillumination, video and non-contact meibography, and imaging methods employing confocal microscopy, optical coherence tomography and ultrasound. This review has also highlighted all the studies to date that have employed meibography as part of their methods. An overview of the available meibography dropout grading systems will also be provided.

  16. Overview of interatomic potentials

    International Nuclear Information System (INIS)

    Bonny, G.; Malerba, L.

    2005-12-01

    In this report an overview on interatomic potentials is given. This overview is by no means complete and it has merely the intention to give the reader an idea of where interatomic potentials come from, as well as to provide the basic ideas behind some commonly used methods for deriving interatomic potentials for molecular dynamics applications. We start by giving a short introduction about the concept of interatomic potential in the framework of quantum mechanics, followed by a short description of commonly used methods for deriving semi-empirical interatomic potentials. After some short theoretical notions on each method, some practical parameterizations of commonly used potentials are given, including very recent ones. An effort has been made to classify existing approaches within a rational and consequent scheme, which is believed to be of use for a thorough comprehension of the topic. Although these approaches can be used in a variety of different materials, we will only discuss the practical cases of metals. Following this, some widespread ad hoc modification of the general methods are discussed. The report is concluded by a generalization of the methods to multi-component materials, in particular metallic alloys. (author)

  17. Technical co-operation report for 2002. Report by the Director General

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-08-01

    General Conference resolution GC(46)/RES/10 reiterated the need to strengthen the technical co- operation programme and requested the Director General to report to the Board of Governors periodically and to the General Conference at its forty-seventh (2003) session on the implementation of resolution GC(46)/RES/10. Part A of this report responds to the General Conference resolution by providing an overview of the progress achieved in technical co-operation policies, strategies, working relations, and internal management during the period 1 April 2002 to 31 March 2003, as well as the major new challenges facing the technical co-operation programme. Part B reports on operational activities and programme performance at the country and regional levels during the calendar year 2002, and Part C reviews the use of financial and human resources in the programme at an aggregate level. As part of its efforts to refine policies for improving programme development, the Agency reviewed the Technical Co-operation Strategy in 2002. The resulting document, The Technical Co-operation Strategy: the 2002 Review (document GOV/INF/2002/8/Mod.1), states that the strategic goal originally identified in the Strategy in 1997 remains valid, and defines four objectives to guide the technical co-operation programme: applying the central criterion (strong government commitment), developing strategic partnerships, increasing the level of funding for technical co-operation, and promoting greater sustainability and self-reliance of nuclear institutions. In line with the Technical Co-operation Strategy, one of the key features of the Agency.s work in 2002 was continuing consultations with Member States at both the policy and operational levels on the management of the ongoing technical co-operation programme and on planning for future activities. The dialogue with Member States aimed at clarifying the strategic objectives and key tools for the utilization of resources to achieve maximum

  18. Microwave solidification project overview

    Energy Technology Data Exchange (ETDEWEB)

    Sprenger, G.

    1993-01-01

    The Rocky Flats Plant Microwave Solidification Project has application potential to the Mixed Waste Treatment Project and the The Mixed Waste Integrated Program. The technical areas being addressed include (1) waste destruction and stabilization; (2) final waste form; and (3) front-end waste handling and feed preparation. This document covers need for such a program; technology description; significance; regulatory requirements; and accomplishments to date. A list of significant reports published under this project is included.

  19. Overview of Explosive Initiators

    Science.gov (United States)

    2015-11-01

    of a relatively small stimulus , be it impact, friction, shock, heat, or electrostatic discharge (ref. 2). On the whole, they tend to be less potent...to be easier to control in terms of crystal habit (ref. 14). Both types are still in use and produced by manufacturers today. Formulations of...Rinkenbach, W. H., " Study of the Action of Lead Azide on Copper," U.S. Army ARDEC, Picatinny Arsenal, NJ, Technical Report No. 1152, 1942. 11 Taylor, G. W

  20. Microwave solidification project overview

    International Nuclear Information System (INIS)

    Sprenger, G.

    1993-01-01

    The Rocky Flats Plant Microwave Solidification Project has application potential to the Mixed Waste Treatment Project and the The Mixed Waste Integrated Program. The technical areas being addressed include (1) waste destruction and stabilization; (2) final waste form; and (3) front-end waste handling and feed preparation. This document covers need for such a program; technology description; significance; regulatory requirements; and accomplishments to date. A list of significant reports published under this project is included

  1. Control of the working environment dosimetry and technical radiation protection at the RA reactor, Part I; Deo I: Kontrola radne sredine - poslovi dozimetrije i tehnicke zastite od zracenja kod reaktora RA

    Energy Technology Data Exchange (ETDEWEB)

    Ninkovic, N; Bjelanovic, J; Minicic, Z; Komatina, R; Raicevic, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Yugoslavia)

    1984-12-15

    This report contains data and analysis of the of measured sample results collected during radiation protection control in the working environment of the RA reactor. First part contains basic exposure values and statistical review of the the total number of radiation measurements. It includes contents of radioactive gasses and effluents in the air, as well as the level of surface contamination of clothes and uncovered parts of the personnel bodies. Second part deals with the analysis of personnel doses. It was found that the maximum individual dose from external irradiation amounted to 16.9 mSV during past 10 months. Individual exposures for 9/10 of the personnel were less than 1/10 of the permissible annual exposure. Data are compared to radiation doses for last year and previous five years. Third part of this annex contains basic data about the quantity of collected radioactive waste, total quantity of contaminated and decontaminated surfaces. The last part analyzes accidents occurred at the reactor during 1984. It was found that there have been no accidents that could cause significant contamination of working surfaces and components nor radiation exposure of the personnel.

  2. ANL Technical Support Program for DOE Environmental Restoration and Waste Management

    International Nuclear Information System (INIS)

    Bates, J.K.; Bradley, C.R.; Buck, E.C.; Cunnane, J.C.; Dietz, N.L.; Ebert, W.L.; Emery, J.W.; Feng, X.; Gerding, T.J.; Gong, M.; Hoh, J.C.; Mazer, J.J.; Wronkiewicz, D.J.; Bourcier, W.L.; Morgan, L.E.; Nielsen, J.K.; Steward, S.A.; Ewing, R.C.; Wang, L.M.; Han, W.T.; Tomozawa, M.

    1992-03-01

    This report provides an overview of progress during FY 1991 for the Technical Support Program that is part of the ANL Technology Support Activity for DOE, Environmental Restoration and Waste Management (EM). The purpose is to evaluate, before hot start-up of the Defenses Waste Processing Facility (DWPF) and the West Valley Demonstration Project (WVDP), factors that are likely to affect glass reaction in an unsaturated environment typical of what may be expected for the candidate Yucca Mountain repository site. Specific goals for the testing program include the following: (1) to review and evaluate available information on parameters that will be important in establishing the long-term performance of glass in a repository environment; (2) to perform testing to further quantify the effects of important variables where there are deficiencies in the available data; and (3) to initiate long-term testing that will bound glass performance under a range of conditions applicable to repository disposal

  3. The International Stripa Project: an overview

    International Nuclear Information System (INIS)

    Fairhurst, C.; Gera, F.; Gnirk, P.; Gray, M.; Stillborg, B.

    1993-01-01

    The International Stripa Project was a a cooperative research and development project among several member countries of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. The scientific and technical objectives of the project were to investigate several aspects of technology concerned with the feasibility and safety of disposal of long-lived, heat-generating radioactive waste at depth in granitic rocks. In particular, the Stripa Project addressed: 1) the development of instruments and procedures to characterize candidate repository sites; 2) the understanding and modelling of groundwater flow and solute transport in fractured crystalline rock; and 3) the design of engineered barriers capable of contributing to waste isolation by restricting groundwater flow in proximity to the waste containers and in the surrounding host rock. This overview summarizes the work focussed on natural barriers and engineered barriers. (author)

  4. International tokamak reactor conceptual design overview

    International Nuclear Information System (INIS)

    Stacey, W.M. Jr.

    1981-01-01

    The International Tokamak Reactor (INTOR) Workshop is an unique collaborative effort among Euratom, Japan, the USA and USSR. The Zero-Phase of the INTOR Workshop, which was conducted during 1979, assessed the technical data base that would support the construction of the next major device in the tokamak program to operate in the early 1990s and defined the objectives and characteristics of this device. The INTOR workshop was extended into phase-1, the Definition Phase, in early 1980. The objective of the Phase-1 Workshop was to develop a conceptual design of the INTOR experiment. The purpose of this paper is to give an overview of the work of the Phase-1 INTOR Workshop (January 1980-June 1981, with emphasis upon the conceptual design

  5. Parliamentarian sovereignty and technical development

    International Nuclear Information System (INIS)

    Dreier, H.; Hofmann, J.

    1986-01-01

    The title indicates the points of main emphasis of the contributions, and points to the programme embodied in the volume. The question is - given the tremendous and ever increasing amount of secondary problems associated with a heated technology development - whether the 'sovereign' state is at all capable of controlling, piloting and fostering technic-scientific processes. The first part ('sovereignty and parliamentarian legislator state') concentrates on the history of notions and ideas in the concept of the sovereign, modern state, and on the constitutional law in force (Dreier, Frohn); the current efficiency of parliament as an organ of control in the process of legislation is investigated (Schulze-Fielitz). The central concern of part 2 ('environmental law and technical development') are topical questions of environmental law (Hofmann, Luebbe-Wolff). Besides the analysis of dogmatic problems of a special administrative law, the major issue is whether and in how far - given modern large-scale technologies - law can adequately govern technique (Schmidt). By analyzing the relationship between technical development and possibilities for guidance by a parliamentarian constitutional state, the articles deal with a central point of intersection between state and administrative law. (orig./HP) [de

  6. Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

    Science.gov (United States)

    Castner, Raymond

    2011-01-01

    The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

  7. Polishers around the globe: an overview on the market of large astronomical mirrors

    Science.gov (United States)

    Döhring, Thorsten

    2014-07-01

    Astronomical mirrors are key elements in modern optical telescopes, their dimensions are usually large and their specifications are demanding. Only a limited number of skilled companies respectively institutions around the world are able to master the challenge to polish an individual astronomical mirror, especially in dimensions above one meter. This paper presents an overview on the corresponding market including a listing of polishers around the globe. Therefore valuable information is provided to the astronomical community: Polishers may use the information as a global competitor database, astronomers and project managers may get more transparency on potential suppliers, and suppliers of polishing equipment may learn about unknown potential customers in other parts of the world. An evaluation of the historical market demand on large monolithic astronomical mirrors is presented. It concluded that this is still a niche market with a typical mean rate of 1-2 mirrors per year. Polishing of such mirrors is an enabling technology with impact on the development of technical know-how, public relation, visibility and reputation of the supplier. Within a corresponding technical discussion different polishing technologies are described. In addition it is demonstrated that strategic aspects and political considerations are influencing the selection of the optical finisher.

  8. Magnetic fusion energy. Part VI

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    The first chapter of this part describes briefly the DOE policy for fusion energy. Subsequent chapters include: FY 1980 overview - activities of the Office of Fusion Energy; subactivity descriptions (confinement systems, development and technology, applied plasma physics, and reactor projects); field activities (DOE laboratories, educational institutions, nonprofit organizations, and commercial firms); commercialization; environmental implications; regional activities; and international programs

  9. Overview of biomass conversion technologies

    International Nuclear Information System (INIS)

    Noor, S.; Latif, A.; Jan, M.

    2011-01-01

    A large part of the biomass is used for non-commercial purposes and mostly for cooking and heating, but the use is not sustainable, because it destroys soil-nutrients, causes indoor and outdoor pollution, adds to greenhouse gases, and results in health problems. Commercial use of biomass includes household fuelwood in industrialized countries and bio-char (charcoal) and firewood in urban and industrial areas in developing countries. The most efficient way of biomass utilization is through gasification, in which the gas produced by biomass gasification can either be used to generate power in an ordinary steam-cycle or be converted into motor fuel. In the latter case, there are two alternatives, namely, the synthesis of methanol and methanol-based motor fuels, or Fischer-Tropsch hydrocarbon synthesis. This paper deals with the technological overview of the state-of-the-art key biomass-conversion technologies that can play an important role in the future. The conversion routes for production of Heat, power and transportation fuel have been summarized in this paper, viz. combustion, gasification, pyrolysis, digestion, fermentation and extraction. (author)

  10. POBLACIÓN EN SITUACIÓN DE DESPLAZAMIENTO EN ANTIOQUIA. EL PAPEL DEL ENFOQUE DE DERECHOS EN LOS ASPECTOS TÉCNICOS PARA EL DISEÑO Y MEDICIÓN DE INDICADORES. (PARTE I POPULATION IN SITUATION OF DISPLACEMENT IN ANTIOQUIA: THE ROLE OF THE APPROACH OF RIGHTS IN THE TECHNICAL ASPECTS FOR THE DESIGN AND THE MEASUREMENT OF INDICATORS (PART I

    Directory of Open Access Journals (Sweden)

    Nicolás Espinosa Menéndez

    2011-06-01

    Full Text Available Este artículo, expone los resultados y lineamientos metodológicos derivados de una investigación realizada por el Observatorio De partamental de Desplazamiento Forzado de Antioquia (ODDIF para estimar el estado del Goce Efectivo de Derechos (GED de la población víctima de desplazamiento forzado en el Departamento. Esta investigación fue realizada en respuesta a los Autos de Seguimiento y a las órdenes impartidas en la sentencia T-025 de 2004 de la Corte Constitucional. El Auto 116 de 2008, estableció los parámetros de medición a adoptar por parte de los entes territoriales para rendir cuentas sobre la garantía de los derechos de esta población. Con el objeto de ofrecer elementos de análisis tanto para las instituciones como para las organizaciones de la sociedad civil, tanto nacionales como internacionales, que analizan y siguen el comportamiento de las situación socioeconómica de las víctimas del conflicto armado en Colombia, en una serie de cuatro artículos, se cubrirán tanto la metodología de medición como algunos de los resultados hallados en el GED de Antioquia. En esta entrega, en particular, serán expuestos el marco normativo del informe, el enfoque teórico de los indicadores tratados y las principales consideraciones técnicas y metodológicas para su medición. A manera de resultado de investigación, en esta entrega del informe se señala las diferencias tanto en las metodologías como en las cifras que hay en la medición de la situación sociooeconómica de la población en situación de desplazamiento realizada por el DNP y la medición de esta realizada por el Osbervatorio.This article introduces the results and the methodological guidelines derived from a piece of research carried out by the State Observatory of Forced Displacement in Antioquia (ODDIF, in order to estimate the state of Full Possession of Rights of the population victim of forced displacement in the State of Antioquia. This piece of research

  11. Technical-economic study of electricity storage

    International Nuclear Information System (INIS)

    Harriche, Farah; Souletis, Romain; Carrette, Bertille; Jarry, Gregory; Dereuddre, Antoine

    2013-01-01

    This study first reports an analysis of all services which could be provided by storage to the French electric power system. It proposes an overview of existing technologies, a comparison of their technical characteristics, and a synthesis of technologies which are the most suited to the main services. The author then discusses some regulatory evolutions which are necessary for a good development of the power storage sector in France. An economic scenario is then proposed for the development of storage by 2030. The author indicates expected capacities for each technologies and possible valorisations

  12. Mutual intercultural perception : how does it affect technical communication? Some data from China, The Netherlands, Germany, France, and Italy.

    NARCIS (Netherlands)

    Ulijn, J.M.; St. Amant, K.

    2000-01-01

    Professional technical communicators increasingly find themselves in a negotiation situation where cultural differences have caused misperceptions or confusion concerning time (pausing, interrupting). This paper overviews an intercultural perception experiment that investigated how individuals from

  13. EDM forum supplement overview.

    Science.gov (United States)

    Calonge, Ned

    2012-07-01

    The Agency for Health Research and Quality funded the Electronic Data Methods Forum (EDM Forum) to share the experiences and learnings from 11 research teams funded through three different grant programs, each of which involve the use of electronic clinical data in Comparative Effectiveness Research and Patient-Centered Outcomes Research. This overview is meant to describe the context in which the EDM forum was created and to introduce the set of papers in this supplement to Medical Care that describe the challenges and approaches to the use of electronic clinical data in the three key areas of analytic methods, clinical informatics and data governance. The participants in the EDM Forum are providing innovative approaches to generate information that can support the building of a "learning health care system." The compilation of papers presented in this supplement should serve as a resource to others working to develop the infrastructure for collecting, validating and using electronic data for research.

  14. Overview of LLRF Systems

    CERN Document Server

    Liepe, Matthias

    2005-01-01

    In the past two decades accelerator controls and feedback systems have changed dramatically. While in the past relative simple analog systems where used, present systems are highly complex, and all accelerators in planning or under construction heavily relay on advanced feedback and feedforward control schemes. The Low-Level-Radio-Frequency (LLRF) system not only stabilizes the field in the RF cavities, but also has to provide among other things frequency control, exception handling, extensive diagnostic, and performance and machine availability maximization. As manifold as the tasks are for the LLRF system, so are the challenges. Linac driven light sources require highest field stability, while pulsed machines or low beta linacs bring their own challenges for the LLRF system. This presentation reviews the challenges and demands on present and future LLRF systems, gives an overview of state-of-the-art solutions, and an introduction into a very active and exciting field of accelerator physics.

  15. Retrievability: An international overview

    International Nuclear Information System (INIS)

    Richardson, P.J.

    2000-01-01

    Using available information from the published literature and material obtained from a network of contacts, a short introductory overview of international developments in the field of retrievability of emplaced nuclear waste was produced for the Swedish National Siting Coordinator for Nuclear Waste Disposal. This examined the issue in terms of a number of basic questions: Definition, Need, Design Implications, Safeguards for Fissile Material, Public Acceptability and Safety Assessment. The report was submitted in February 1999, and acted as a catalyst for the organisation of an international seminar by KASAM, the Swedish National Council for Nuclear Waste (these proceedings). This paper describes the report contents, and points to the invited papers at the seminar which expand on and update the limited descriptions in the original report. (author)

  16. Roboethics a navigating overview

    CERN Document Server

    Tzafestas, Spyros G

    2016-01-01

    This volume explores the ethical questions that arise in the development, creation and use of robots that are capable of semiautonomous or autonomous decision making and human-like action. It examines how ethical and moral theories can and must be applied to address the complex and critical issues of the application of these intelligent robots in society. Coverage first presents fundamental concepts and provides a general overview of ethics, artificial intelligence and robotics. Next, the book studies all principal ethical applications of robots, namely medical, assistive, socialized and war roboethics. It looks at such issues as robotic surgery, children-robot and elderly-robot therapeutical/social interactions and the use of robots, especially autonomous lethal ones, in warfare. In addition, a chapter also considers Japanese roboethics as well as key intercultural and robot legislation issues. Overall, readers are provided with a thorough investigation into the moral responsibility (if any) of autonomous ro...

  17. Energy research 2003 - Overview

    International Nuclear Information System (INIS)

    2004-01-01

    This publication issued by the Swiss Federal Office of Energy (SFOE) presents an overview of advances made in energy research in Switzerland in 2003. In the report, the heads of various programmes present projects and summarise the results of research in four main areas: Efficient use of energy, renewable energies, nuclear energy and energy policy fundamentals. Energy-efficiency is illustrated by examples from the areas of building, traffic, electricity, ambient heat and combined heat and power, combustion, fuel cells and in the process engineering areas. In the renewable energy area, projects concerning energy storage, photovoltaics, solar chemistry and hydrogen, biomass, small-scale hydro, geothermal energy and wind energy are presented. Work being done on nuclear safety and disposal regulations as well as controlled thermonuclear fusion are discussed

  18. Zika virus: An overview

    Directory of Open Access Journals (Sweden)

    Gautam Rawal

    2016-01-01

    Full Text Available The Zika virus has been in the news for quite some time due to the ongoing recent outbreak in the Southern America, which started in December 2015. It has been declared a public health emergency by the World Health Organization in February 2016 owing to its association with the congenital deformities, particularly microcephaly in infants borne to the infected mothers. The rapid spread of the virus throughout the United States of America and subsequently to Asia has raised serious international concerns. Its spread to countries neighboring India is a serious threat to the Indian population. This review article gives an overview about the virus, its diagnosis, clinical features, and the management.

  19. An overview of BMIs.

    Science.gov (United States)

    Sepulveda, Francisco

    2009-01-01

    Research in BMIs has grown rapidly in the last few years. However, little attention has been paid to the overall system behavior, most published work being focused on the signal classification (i.e., translation) stage. More recently an increasing amount of work has been centred around the feature selection stage that precedes translation. The emphasis in feature selection and translation has stemmed from the large number of researchers with a machine learning or pattern recognition background who have recently joined the field. While there is an important contribution to BMIs, two crucial elements have not been sufficiently explored: the selection of suitable mental tasks and feedback protocols. This review presents an overview of BMIs and its main elements, with a focus on why each stage is important for the overall performance of such systems.

  20. Overview of particle physics

    International Nuclear Information System (INIS)

    Salam, A.

    1986-02-01

    An overview of the situation of particle physics at the end of 1985 is given. It includes the following topics: ideas which have been tested or will soon be tested such as the standard model based on the symmetry group SUsub(C)(3)xSUsub(L)(2)xU(1), light Higgs and preons; theoretical ideas whose time has not yet come (basically because no accelerators are being constructed to test them) such as N=1 supersymmetry and N=1 supergravity right-handed weak currents, extended supergravities and superstring models; ideas for which non-accelerator and passive experiments have been mounted such as proton decay, nn-bar oscillations, neutrino masses and oscillations, monopoles and dark matter

  1. Nuclear knowledge management overview at EDF

    International Nuclear Information System (INIS)

    Ballay, J.; Vannieuwenhuyse, J.; Nups, A.

    2004-01-01

    This paper gives an overview of knowledge management practices within the French nuclear generation park. The study was initially partnered by one of the 19 Nuclear Power-plants, located at Golfech near Toulouse, and then extended to a more general overview. Golfech is a 650 people unit, from which 25 of them were interviewed to carry out the study. This staff was made of managers, experts, seniors and juniors, all of them being working at Golfech in the different skills for nuclear generation needs: driving, engineering, maintenance, safety, environment, etc. They were questioned about their practices, tools and organisations concerning creating, sharing, transferring, and renewing knowledge. A general knowledge management model was derived from this study. It shows that the professional knowledge, in any industrial sector, is the result of four learning processes: an education-oriented process, a codified and normative learning process, a context-based collective learning process and an experience-based individual learning process. These learning processes inter-operate through any kind of activity, and they induce four knowledge structures: the basic knowledge, the technical knowledge, the know-how and the experiential knowledge. In conclusion, the model explains how the firm learns and, in the same time, how everybody as a single individual learns. It is a crucial point to understand how the knowledge-based economy runs, as a constant interconnection between two opposite but complementary forces: the collective and the individual ones. (author)

  2. Overview of the DOE packaging certification process

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Y.Y.; Carlson, R.D. [Argonne National Lab., IL (United States); Carlson, R.W. [Lawrence Livermore National Lab., CA (United States); Kapoor, A. [USDOE, Washington, DC (United States)

    1995-12-31

    This paper gives an overview of the DOE packaging certification process, which is implemented by the Office of Facility Safety Analysis, under the Assistance Secretary for Environment, Safety and Health, for packagings that are not used for weapons and weapons components, nor for naval nuclear propulsion. The overview will emphasize Type B packagings and the Safety Analysis Report for Packaging (SARP) review that parallels the NRC packaging review. Other important elements in the DOE packaging certification program, such as training, methods development, data bases, and technical assistance, are also emphasized, because they have contributed significantly to the improvement of the certification process since DOE consolidated its packaging certification function in 1985. The paper finishes with a discussion of the roles and functions of the DOE Packaging Safety Review Steering Committee, which is chartered to address issues and concerns of interest to the DOE packaging and transportation safety community. Two articles related to DOE packaging certification were published earlier on the SARP review procedures and the DOE Packaging Review Guide. These articles may be consulted for additional information.

  3. Monadologies:An historical overview

    OpenAIRE

    Dunham, Jeremy; Phemister, Pauline

    2016-01-01

    This introductory overview comprises (i) a brief account of Leibniz's own monadology; (ii) a discussion of the reception of his philosophy up to Kant; and (iii) a short overview of the monadologies developed after Kant's first Critique, made via a summary of key points raised in this guest issue, highlighting recurrent themes, which include questions of historiography.

  4. IAEA safeguards technical manual

    International Nuclear Information System (INIS)

    1982-03-01

    Part F of the Safeguards Technical Manual is being issued in three volumes. Volume 1 was published in 1977 and revised slightly in 1979. Volume 1 discusses basic probability concepts, statistical inference, models and measurement errors, estimation of measurement variances, and calibration. These topics of general interest in a number of application areas, are presented with examples drawn from nuclear materials safeguards. The final two chapters in Volume 1 deal with problem areas unique to safeguards: calculating the variance of MUF and of D respectively. Volume 2 continues where Volume 1 left off with a presentation of topics of specific interest to Agency safeguards. These topics include inspection planning from a design and effectiveness evaluation viewpoint, on-facility site inspection activities, variables data analysis as applied to inspection data, preparation of inspection reports with respect to statistical aspects of the inspection, and the distribution of inspection samples to more than one analytical laboratory. Volume 3 covers generally the same material as Volumes 1 and 2 but with much greater unity and cohesiveness. Further, the cook-book style of the previous two volumes has been replaced by one that makes use of equations and formulas as opposed to computational steps, and that also provides the bases for the statistical procedures discussed. Hopefully, this will help minimize the frequency of misapplications of the techniques

  5. PRIMARY CARIES: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    Gaurav Solanki

    2012-01-01

    Full Text Available Primary caries is an initial lesions produced by direct extension from an external surface. Dental caries is called as tooth decay or a cavity is a disease in which bacterial processes changes carbohydrate to acid which than dematerializes the hard tooth structure like enamel, dentin and cementum. Streptococcus mutans and Lactobacillus are the bacteria responsible for the dental caries by acid production. This article throws light on the dental caries disease, its sign and symptoms, treatment and prevention of it. A review of some patents on dental caries is also provided that summarizes the recent technical advancements taken place in this area.

  6. SP-100 Program overview

    International Nuclear Information System (INIS)

    Truscello, V.C.

    1984-01-01

    The SP-100 Program is expected to go through three phases: technology assessment and advancement, ground testing, and flight qualification. Currently the program is in the two- to three-year technology assessment and advancement stage. Goals are to identify the space nuclear power system concept that best meets anticipated requirements of future space missions, assess the technical feasibility of that concept, and establish a cost and schedule for developing the concept. The SP-100 Project Office has begun the implementation activities needed to meet these goals. With regard to refractory alloys, a better data base will be required before we move ahead in the program from technology assessment to ground demonstration

  7. Protecting safeguards information / Division of technical support

    International Nuclear Information System (INIS)

    2002-01-01

    This DVD contains two films representing the key aspects of the IAEA Department of Safeguards. 'Protecting Safeguards Information' is a narrative/fiction film which presents the Agency's information handling and protection measures. A security representative from a fictional nation receives a briefing on the procedures and methods used by the Department. These techniques will assure member states that the information they provide to the Agency is kept safe and confidential. 'Division of Technical Support' is a non-fiction documentary which presents a detailed look at the technical capabilities and management techniques used by the Agency in nuclear material accountancy. The film covers many aspects of safeguards equipment and techniques including: NDA and DA instruments, seals, surveillance, training, development and maintenance. Taken together, these films provide an introduction and overview to many important aspects of the IAEA Department of Safeguards. (IAEA)

  8. ESGE-ESGENA technical specification for process validation and routine testing of endoscope reprocessing in washer-disinfectors according to EN ISO 15883, parts 1, 4, and ISO/TS 15883-5.

    Science.gov (United States)

    Beilenhoff, Ulrike; Biering, Holger; Blum, Reinhard; Brljak, Jadranka; Cimbro, Monica; Dumonceau, Jean-Marc; Hassan, Cesare; Jung, Michael; Neumann, Christiane; Pietsch, Michael; Pineau, Lionel; Ponchon, Thierry; Rejchrt, Stanislav; Rey, Jean-François; Schmidt, Verona; Tillett, Jayne; van Hooft, Jeanin

    2017-12-01

    1 Prerequisites. The clinical service provider should obtain confirmation from the endoscope washer-disinfector (EWD) manufacturer that all endoscopes intended to be used can be reprocessed in the EWD. 2 Installation qualification. This can be performed by different parties but national guidelines should define who has the responsibilities, taking into account legal requirements. 3 Operational qualification. This should include parametric tests to verify that the EWD is working according to its specifications. 4 Performance qualification. Testing of cleaning performance, microbiological testing of routinely used endoscopes, and the quality of the final rinse water should be considered in all local guidelines. The extent of these tests depends on local requirements. According to the results of type testing performed during EWD development, other parameters can be tested if local regulatory authorities accept this. Chemical residues on endoscope surfaces should be searched for, if acceptable test methods are available. 5 Routine inspections. National guidelines should consider both technical and performance criteria. Individual risk analyses performed in the validation and requalification processes are helpful for defining appropriate test frequencies for routine inspections. © Georg Thieme Verlag KG Stuttgart · New York.

  9. School Environment Handbook Part I: Overview and Workshop Activities.

    Science.gov (United States)

    Gillespie, Judith; And Others

    This handbook, produced by the School Environmental Impact Program (Indiana) was developed to improve school environments and to create more positive attitudes and behaviors in school participants (all those involved in the school and its environment). It is designed to help in the assessment of school conditions by individuals, groups, or school…

  10. An Overview of the Asynchronous Digital Systems – Part 3

    Directory of Open Access Journals (Sweden)

    Mihai Timis

    2008-01-01

    Full Text Available Implementation methods for the digital asynchronous systems use different predefined models like self timed circuits, speed independent circuits, delay insensitive circuits, handshake protocol implementation in asynchronous systems,C Muller circuits.

  11. An Overview of the Asynchronous Digital Systems – Part 2

    Directory of Open Access Journals (Sweden)

    Mihai Timis

    2008-01-01

    Full Text Available Implementation methods for the digital asynchronous systems use different predefined models like self timed circuits, speed independent circuits, delay insensitive circuits, handshake protocol implementation in asynchronous systems,C Muller circuits.

  12. Kant on mental disorder. Part 1: an overview.

    Science.gov (United States)

    Frierson, Patrick

    2009-09-01

    This paper sets out Kant's anthropological account of mental disorder. I begin with a discussion of the nature of Kant's 'pragmatic anthropology' and the implications of the fact that his discussion of mental disorder takes place in that context. I then set out Kant's taxonomy of the mind and discuss the various disorders affecting the cognitive faculty and the faculties of feeling and desire. I end with a brief discussion of Kant's views on the causes, preventions, and treatments of mental disorder.

  13. Introduction and NASA Electronic Parts and Packaging (NEPP) Program Overview

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2014-01-01

    This presentation includes an introduction to the space radiation environment, the effects on electronics, the environment in action, flight projects, mission needs, and radiation hardness assurance (RHA).

  14. Microwave Photochemistry and Photocatalysis. Part 1: Principles and Overview

    Czech Academy of Sciences Publication Activity Database

    Církva, Vladimír; Relich, Stanislav

    2011-01-01

    Roč. 15, č. 2 (2011), s. 248-264 ISSN 1385-2728 R&D Projects: GA ČR GA104/07/1212 Institutional research plan: CEZ:AV0Z40720504 Keywords : batch and flow-through photoreactor * electrodeless discharge lamp * thin titania films Subject RIV: CH - Nuclear ; Quantum Chemistry Impact factor: 3.064, year: 2011

  15. Technical Cooperation report for 2012. Report by the Director General

    International Nuclear Information System (INIS)

    2013-07-01

    This year's Technical Cooperation (TC) Report is set out in three parts: A, Strengthening the Agency's Technical Cooperation Activities; B, TC Programme Resources and Delivery, and C, Programme Activities and Achievements in 2012: Regional Overview. Annex 1 provides examples of project activities and achievements in specific thematic areas. Part A is divided into two sections. The first presents an overview of the Agency's technical cooperation activities in 2012 in the context of global development, reports on how the programme is tailored to the specific needs of Member States in each region (with a focus on human resource development), and highlights TC activities in the field of food production, food protection and food safety, the topics covered by the 2012 Scientific Forum. The Director General's emphasis in 2012 on food security reflects the importance of this topic in each region that the TC programme serves. Throughout 2012, TC projects in the Africa region contributed to agricultural productivity and food security using nuclear technology. Projects built Member State capacity to tackle tsetse and trypanosmosis using the sterile insect technique (SIT), and to improve rice varieties through mutation breeding and biotechnology. Other projects focused on improving the use of agricultural resources, combating soil erosion by optimizing conservation agriculture and supporting innovative practices to combat land degradation and enhance soil productivity for improved food security. Assistance was provided to improve cattle productivity through genetic improvement, including artificial insemination. In Asia and the Pacific, assistance to Member States in this field built competencies in soil-water management and crop nutrition, as well as in mutation breeding, with the aim of enhancing agricultural productivity and developing suitable crop varieties that are adaptable to climate change. Additional projects focused on artificial insemination and control of

  16. Writing a technical note.

    Science.gov (United States)

    Ng, K H; Peh, W C G

    2010-02-01

    A technical note is a short article giving a brief description of a specific development, technique or procedure, or it may describe a modification of an existing technique, procedure or device applicable to medicine. The technique, procedure or device described should have practical value and should contribute to clinical diagnosis or management. It could also present a software tool, or an experimental or computational method. Technical notes are variously referred to as technical innovations or technical developments. The main criteria for publication will be the novelty of concepts involved, the validity of the technique and its potential for clinical applications.

  17. Technical Elements (CCT1)

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Wittchen, Kim Bjarne

    2017-01-01

    Many of the aspects dealt with in the CA EPBD are closely interlinked with each other and may refer to both new and existing buildings, as well as to inspection and certification. This is also true for technical aspects, such as the calculation methodologies, and how to include technical systems......’ efficiency or how to integrate renewable energy within them. The central team for Technical Elements deals with issues of a technical nature, which are common to new and existing buildings, and/or with minimum demands, certification and inspection. This report focuses on the implementation of Articles 3, 4...

  18. Pancreas transplantation: an overview

    Directory of Open Access Journals (Sweden)

    Andre Ibrahim David

    2010-12-01

    Full Text Available Pancreas transplantation is the only treatment able to reestablish normal glucose and glycated hemoglobin levels in insulin-dependent diabetic patients without the use of exogenous insulin. The evolution of pancreas transplantation in treatment of diabetes was determined by advances in the fields of surgical technique, organ preservation and immunosuppressants. The main complication leading to graft loss is technical failure followed by acute or chronic rejection. Technical failure means graft loss within the first three months following transplantation due to vascular thrombosis (50%, pancreatitis (20%, infection (18%, fistula (6.5% and bleeding (2.4%. Immunological complications still affect 30% of patients, and rejection is the cause of graft loss in 10% of cases. Chronic rejection is the most common late complication. Cardiovascular diseases are the most common causes of late mortality in pancreas transplantation, so it remains the most effective treatment for type 1 diabetes patients. There is a significant improvement in quality of life and in patient’s survival rates. The development of islet transplantation could eliminate or minimize surgical complications and immunosuppression.

  19. Collisions involving antiprotons and antihydrogen: an overview

    Science.gov (United States)

    Jonsell, S.

    2018-03-01

    I give an overview of experimental and theoretical results for antiproton and antihydrogen scattering with atoms and molecules (in particular H, He). At low energies (>1 keV) there are practically no experimental data available. Instead I compare the results from different theoretical calculations, of various degrees of sophistication. At energies up to a few tens of eV, I focus on simple approximations that give reasonably accurate results, as these allow quick estimates of collision rates without embarking on a research project. This article is part of the Theo Murphy meeting issue `Antiproton physics in the ELENA era'.

  20. Membrane Technologies in Wine Industry: An Overview.

    Science.gov (United States)

    El Rayess, Youssef; Mietton-Peuchot, Martine

    2016-09-09

    Membrane processes are increasingly reported for various applications in wine industry such as microfiltration, electrodialysis, and reverse osmosis, but also emerging processes as bipolar electrodialysis and membrane contactor. Membrane-based processes are playing a critical role in the field of separation/purification, clarification, stabilization, concentration, and de-alcoholization of wine products. They begin to be an integral part of the winemaking process. This review will provide an overview of recent developments, applications, and published literature in membrane technologies applied in wine industry.