WorldWideScience

Sample records for technical committee chair

  1. Political Leadership in Parliament: The Role of Select Committee Chairs in the UK House of Commons

    OpenAIRE

    Alexandra Kelso

    2016-01-01

    Concepts of political leadership have been applied sparingly to parliaments, and not at all to the study of House of Commons select committees in the UK Parliament, where analysis has largely focused on their institutional capacity to scrutinise government and hold it to account. Yet examining these committees through a political leadership lens illuminates the complex role of committee chairs, a role which was significantly reshaped in 2010 with a shift to election of chairs by the whole Hou...

  2. Fair inclusion of men and women in Australian clinical research: views from ethics committee chairs.

    Science.gov (United States)

    Ballantyne, Angela J; Rogers, Wendy A

    2008-06-02

    To explore the role played by human research ethics committees (HRECs) with regard to the fair inclusion of men and women in Australian clinical research. Semi-structured face-to-face and telephone interviews with 25 chairs (or their nominees) of Australian HRECs between 9 June 2006 and 24 January 2007. Chairs' views about the role of HRECs in identifying sex discrimination, monitoring the inclusion of men and women in clinical research, and interpreting and applying National Health and Medical Research Council (NHMRC) guidelines relating to fair inclusion in research. In general, HRECs do not take an active role in monitoring the sex of research participants. They do not ask for or often receive information about the sex of participants. Most HREC chairs did not believe that sex discrimination in research is currently a significant or widespread problem, and were confident that their committees would be able to identify arbitrary exclusion of either men or women from research. However, many chairs expressed a lack of familiarity with debates about sex equity in research. Most chairs were unaware that anti-sex-discrimination legislation could apply to research. "Fair inclusion" was interpreted in a number of ways by chairs, but most frequently that the sex balance among research participants should reflect the sex distribution in the community of the condition under investigation. Chairs said their committees would be reluctant to reject a research protocol on the grounds that the sex balance among participants was perceived to be unfair. Views about, and expertise on, sex equity in research vary among chairs of HRECs. Many HRECs require further guidance about the appropriate standards for fair inclusion of men and women in Australian clinical research.

  3. Update of technical coordinating committee activities

    Energy Technology Data Exchange (ETDEWEB)

    Alvarado, R.A.

    1995-12-31

    The Technical Coordinating Committee has its origins in the earliest days of implementing the Low-Level Radioactive Waste Policy Act. Between 1982 and 1985, individuals in several of the states felt that coordination among the states would be beneficial to all by affording states a cost-effective method for sharing ideas, discussing alternatives, and presenting solutions to common problems. At the current time, the committee comprises members from each of the sited states. Various compacts, federal agencies, and industry groups participate in committee activities. The Low-Level Management Program provides support for the committee through the provision of logistical support and limited manpower allocation. Activities of the committee have recently focused on waste treatment and minimization technologies. The committee also has worked diligently to see the review of the 3RSTAT computer code completed. The committee has taken a position on various regulatory proposals the past year. The committee expects to continue its work until new sites are brought online.

  4. IAEA technical committee meeting on fusion safety

    International Nuclear Information System (INIS)

    Dolan, T.

    2000-01-01

    The 7th IAEA Technical Committee Meeting on Fusion Reactor Safety was held in Cannes, France on 13-16 June 2000. The purpose of the meeting was to learn lessons from current installations and studies for the future

  5. Human research ethics committees in technical universities.

    Science.gov (United States)

    Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

    2014-07-01

    Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

  6. 75 FR 20817 - Information Systems Technical Advisory Committee

    Science.gov (United States)

    2010-04-21

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... Administration on technical questions that affect the level of export controls applicable to information systems...

  7. Applied Welding Technology. Technical Committee Report.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in applied welding technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are…

  8. Precision Machining Technology. Technical Committee Report.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in precision machining technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

  9. 77 FR 64464 - Information Systems Technical Advisory Committee

    Science.gov (United States)

    2012-10-22

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... of export controls applicable to information systems equipment and technology. Wednesday, November 7...

  10. 78 FR 64932 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-10-30

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food, Conservation, and Energy Act of 2008. The Federal Advisory Committee Act (Public...

  11. 76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

    Science.gov (United States)

    2011-05-20

    ... pipeline rehabilitation, replacement and repair initiatives along with all forum-related comments. PHMSA... Pipeline and Hazardous Materials Safety Administration Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY...

  12. 76 FR 33701 - Agricultural Technical Advisory Committees for Trade; Renewal

    Science.gov (United States)

    2011-06-09

    ... Foreign Agricultural Service Agricultural Technical Advisory Committees for Trade; Renewal AGENCY: Foreign... the Secretary and the USTR concerning agricultural trade policy. The committees are intended to ensure..., Congress established a private sector advisory committee system to ensure that U.S. trade policy and...

  13. 77 FR 64970 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-10-24

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... on USDA Biomass R&D Activities Update on DOE Biomass R&D Activities Annual Committee Recommendations...

  14. 77 FR 6791 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-02-09

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee. The Federal... leading to the production of biobased fuels and biobased products. Tentative Agenda Update on USDA Biomass...

  15. 77 FR 50488 - Hydrogen and Fuel Cell Technical Advisory Committee

    Science.gov (United States)

    2012-08-21

    ... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee AGENCY: Department of...). SUMMARY: This notice announces an open meeting (Webinar) of the Hydrogen and Fuel Cell Technical Advisory... Avenue, Washington, DC 20585. SUPPLEMENTARY INFORMATION: Purpose of the Committee: The Hydrogen and Fuel...

  16. 76 FR 38608 - Sensors and Instrumentation Technical Advisory Committee;

    Science.gov (United States)

    2011-07-01

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  17. 75 FR 74026 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-11-30

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food, Conservation, and Energy Act of 2008. The Federal Advisory...

  18. 75 FR 56525 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-09-16

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food, Conservation, and Energy Act of 2008. The Federal Advisory...

  19. 75 FR 30804 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-06-02

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food, Conservation, and Energy Act of 2008. The Federal Advisory...

  20. 7 CFR 610.24 - Responsibilities of State Technical Committees.

    Science.gov (United States)

    2010-01-01

    ... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE State Technical... programs under Title XII of the Food Security Act of 1985 including, but not limited to, the Conservation... 7 Agriculture 6 2010-01-01 2010-01-01 false Responsibilities of State Technical Committees. 610.24...

  1. 78 FR 8500 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-02-06

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... fuels and biobased products. Tentative Agenda: Agenda will include the following: Update on USDA Biomass...

  2. 75 FR 11526 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-03-11

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... Register to allow for public participation. This notice announces the meeting of the Biomass Research and...

  3. E-learning as evidence of educational scholarship: a survey of chairs of promotion and tenure committees at U.S. medical schools.

    Science.gov (United States)

    Ruiz, Jorge G; Candler, Christopher S; Qadri, Syeda Sobiya; Roos, Bernard A

    2009-01-01

    To ascertain the attitudes of chairs of U.S. medical school promotion committees toward e-learning and how their institutions recognize and reward faculty for e-learning as a scholarly activity. In 2007, the authors mailed a questionnaire to chairs of promotion and tenure committees at 123 U.S. medical schools. Chairs rated the importance of major areas of clinician-educators' e-learning performance using a five-point scale (1 = not important; 5 = extremely important). In another section, chairs rated the quality of information that is usually available to evaluate faculty performance in e-learning scholarship using a five-point scale (1 = low quality; 5 = excellent). Respondents were also able to enter qualitative comments about the role of e-learning and educational scholarship at their institution. Frequency distributions for each question were examined to identify any irregularities in the data, and descriptive statistics were used to summarize responses to questions. Themes were extracted from the qualitative data. The response rate to the survey was 51% (63/123). Fifty-six (88.8%) participants indicated that educational scholarship was at least moderately important to a candidate's chances of promotion. Forty-eight (76%) respondents recognized e-learning as a meaningful contribution to scholarship. The chairs rated several levels of evaluation as well as types of e-learning activities and products: changing learner outcomes, developing and disseminating materials, authoring publications, receiving grant awards, serving on editorial boards, and directing a program. Promotion chairs value selected e-learning activities and products as evidence of teaching scholarship.

  4. 78 FR 60866 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2013-10-02

    ... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Office of...: This notice announces an open meeting of the Hydrogen and Fuel Cell Technical Advisory Committee (HTAC... Committee: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under section 807...

  5. Activities of RILEM Technical Committee: Internal Curing of Concrete and Anticipated Research

    DEFF Research Database (Denmark)

    Kovler, Konstantin; Jensen, Ole Mejlhede

    of concrete would be deeper understanding of the absorption/desorption mechanism of super-absorbent polymers (SAP) introduced into cementitious hardening material. A new RILEM TC on use of SAP in concrete has been recently drafted to follow up on the work of the TC 196-ICC. One of the important instruments......Novel methods of shrinkage mitigation, based on special advanced methods of internal curing (IC), are currently being intensively studied in research groups in several countries. They have been the focus of the State-of-the-Art report prepared by the Technical Committee TC 196-ICC “Internal Curing...... of Concrete” of the International Union of Laboratories and Experts in Construction Materials, Systems and Structures (RILEM). The authors of this short communication served as a chair (K. Kovler) and secretary (O.M. Jensen) of the TC. The regular and corresponding members were acknowledged RILEM experts...

  6. General report of Technical Committee IV

    International Nuclear Information System (INIS)

    Feinendegen, L.E.

    1979-01-01

    During the report period, work in section IV of the Committee was continued on the molecular, cellular and organic levels with the aim to elucidate the origin, course and treatment possibility of the syndrome that may occur in the mammalian organism upon acute and chronic ionizing irradiation as a function of the radiation dose received. The investigations dealt a.o. with the effect of O 2 in protein radiolysis, recovery processes of the haematopoietic stem cells, delayed effects in the gastrointestical tract subsequent to local irradiation, and combination damage in the lungs and liver of rats upon combined cytostatic and radiation therapy. (orig./HP) [de

  7. INFCE technical co-ordinating committee documents

    International Nuclear Information System (INIS)

    A collection of the documents covering the period December 1977 through February 1980 submitted to or generated by the Technical Co-ordinating Comittee is presented. The documents cover primarily the organizational aspects of INFCE, but conclusions from the various Working Trays are summarized

  8. Prof. Manuel Trajtenberg, Chair of the Planning and Budget Committee, Council for Higher Education in Israel with CERN Director-General R. Heuer and in front of the ATLAS detector on Thursday 14th January.

    CERN Multimedia

    Maximilien Brice; Point 1

    2010-01-01

    Prof. Manuel Trajtenberg, Chair of the Planning and Budget Committee, Council for Higher Education in Israel with CERN Director-General R. Heuer and in front of the ATLAS detector on Thursday 14th January.

  9. 78 FR 46331 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-07-31

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... Energy is soliciting nominations for candidates to fill vacancies on the Biomass Research and Development... INFORMATION: The Biomass Research and Development Act of 2000 (Biomass Act) [Pub. L. 106-224] requires...

  10. 76 FR 9339 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-02-17

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food.... Tentative Agenda: Agenda will include the following: Update on USDA Biomass R&D Activities. Update on DOE...

  11. 77 FR 20377 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-04-04

    ... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and...: Purpose of Meeting: To provide advice and guidance that promotes research and development leading to the...

  12. 76 FR 46781 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-08-03

    ... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development...: Notice of open meeting. SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food, Conservation, and Energy Act of...

  13. 77 FR 66178 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting...

    Science.gov (United States)

    2012-11-02

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting; Rescheduled The Sensors and Instrumentation Technical Advisory Committee (SITAC... controls applicable to sensors ] and instrumentation equipment and technology. Agenda Public Session 1...

  14. 78 FR 63161 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting...

    Science.gov (United States)

    2013-10-23

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting ``Rescheduled'' The Sensors and Instrumentation Technical Advisory Committee (SITAC... controls applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1...

  15. 77 FR 1666 - Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-01-11

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... information systems equipment and technology. Wednesday, January 25 Open Session 1. Welcome and Introductions...

  16. 75 FR 39919 - Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-07-13

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... export controls applicable to information systems equipment and technology. Wednesday, July 28 Public...

  17. 76 FR 323 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-01-04

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... export controls applicable to information systems equipment and technology. Wednesday, January 26 Open...

  18. 78 FR 1198 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-01-08

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... to information systems equipment and technology. Wednesday, January 23 Open Session 1. Welcome and...

  19. 78 FR 42753 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-07-17

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... of export controls applicable to information systems equipment and technology. Wednesday, July 31...

  20. 78 FR 63162 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-10-23

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... of export controls applicable to information systems equipment and technology. Wednesday, November 6...

  1. 76 FR 64895 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-10-19

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... export controls applicable to information systems equipment and technology. Wednesday, November 2 Public...

  2. 76 FR 39845 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-07-07

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... export controls applicable to information systems equipment and technology. Wednesday, July 27 Public...

  3. 75 FR 64258 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-10-19

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... export controls applicable to information systems equipment and technology. Wednesday, November 3 Public...

  4. 75 FR 1339 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-01-11

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... export controls applicable to information systems equipment and technology. Wednesday, January 27 Open...

  5. 78 FR 24160 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-04-24

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... controls applicable to information systems equipment and technology. Tuesday, May 7 Open Session 1. Welcome...

  6. 77 FR 37652 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-06-22

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... that affect the level of export controls applicable to information systems equipment and technology...

  7. 77 FR 24178 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-04-23

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... controls applicable to information systems equipment and technology. Tuesday, May 8 Open Session 1. Welcome...

  8. Report of Radioisotope Inspection Technical Committee

    International Nuclear Information System (INIS)

    Otani, H.

    1980-01-01

    For the purpose of unifying the method of performance test for the routine management of the performance of RI equipments, the check-up of performance at the time of purchasing the equipments or research works, the Committee has continued the investigation on the method of performance test on RI equipments. Now, the definite plans have been decided regarding the method of performance test on radioisotope monitoring instruments and the measuring instruments for RI samples, therefore they are reported hereinafter. As for the radioisotope monitoring instruments, Curie meter, area monitor, water monitor, gas monitor and hand, foot and cloth monitor were taken up, and the items of inspection, the purposes, the testing methods, the expression of measured results and their evaluation were discussed. The accuracy of measurement of absolute radio-activity is important in Curie meter, the stability of continuous monitoring is important in general monitors, and the limit of measurement is important in the hand, foot and cloth monitor. As for the measuring instruments for radioactive materials, the efficiency of counting, linearity and stability were taken up as the items of performance test, and other matters to which attention should be paid were added. These were described, dividing into well type scintillation counter and liquid scintillation counter. (Kako, I.)

  9. DOE Chair of Excellence in Environmental Disciplines-Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Kurunganty, Sastry; Loran, Roberto; Roque-Malherbe, Rolando; Hijazi, Yazan; Nieto, Santander; Gomez, Will A.; Duconge, Jose; Cotto, María del C.; Muniz, Carlos; Diaz, Francisco J.; Neira, Carlos F.; Marquez, Francisco; Del Valle, W.; Thommes, M.

    2014-02-19

    The report Massie Chair of Excellence Program at Universidad del Turabo, contract DE-FG02-95EW12610, during the period of 9/29/1995 to 9/29/2011. The initial program aims included development of academic programs in the Environmental Sciences and Engineering, and Research and Development focused initially on environmentally friendly processes and later revised also include: renewable energy and international cooperation. From 1995 -2005, the Program at UT lead the establishment of the new undergraduate program in electrical engineering at the School of Engineering (SoE), worked on requirements to achieve ABET accreditation of the SoE B.S. Mechanical Engineering and B.S. Electrical Engineering programs, mentored junior faculty, taught undergraduate courses in electrical engineering, and revised the electrical engineering curriculum. Engineering undergraduate laboratories were designed and developed. The following research sub-project was developed: Research and development of new perovskite-alumina hydrogen permeable asymmetrical nanostructured membranes for hydrogen purification, and extremely high specific surface area silica materials for hydrogen storage in the form of ammonia, Dr. Rolando Roque-Malherbe Subproject PI, Dr. Santander Nieto and Mr. Will Gómez Research Assistants. In 2006, the Massie Chair of Excellence Program was transferred to the National Nuclear Security Agency, NNSA and DNN. DoE required a revised proposal aligned with the priorities of the Administration. The revised approved program aims included: (1) Research (2) Student Development: promote the development of minority undergraduate and graduate students through research teams, internships, conferences, new courses; and, (3) Support: (a) Research administration and (b) Dissemination through international conferences, the UT Distinguished Lecturer Series in STEM fields and at the annual Universidad del Turabo (UT) Researchers Conference. Research included: Sub-Project 1: Synthesis and

  10. 77 FR 18243 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC); Notice of Open Meeting

    Science.gov (United States)

    2012-03-27

    ... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC); Notice of Open... open meeting. SUMMARY: This notice announces a meeting of the Hydrogen and Fuel Cell Technical Advisory... Committee: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under Section 807...

  11. Research using small tokamaks. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-09-01

    The technical reports in these proceedings were presented at the IAEA Technical Committee Meeting on research Using Small Tokamaks, held in Ahmedabad, India, 6-7 December 1995. The purpose of this annual meeting is to provide a forum for the exchange of information on various small and medium sized plasma experiments, not only for tokamaks. The potential benefits of these research programmes are to: test theories, such as effects of the plasma rotation; check empirical scalings, such as density limits; develop fusion technology hardware; develop plasma diagnostics; such as tomography; and to train scientists, engineers, technicians, and students, particularly in developing IAEA Member States

  12. Energy Materials Coordinating Committee, fiscal year 1997. Annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1997 and describes the materials research programs of various offices and divisions within the Department.

  13. Committees

    Science.gov (United States)

    2012-11-01

    Leadership Team of the IAHR Committee for Hydraulic Machinery and Systems Eduard EGUSQUIZA, UPC Barcelona, Spain, Chair François AVELLAN, EPFL-LMH, Switzerland, Past Chair Richard K FISHER, Voith Hydro Inc., USA, Past Chair Fidel ARZOLA, Edelca, Venezuela Michel COUSTON, Alstom Hydro, France Niklas DAHLBÄCKCK, Vatenfall, Sweden Normand DESY, Andritz VA TECH Hydro Ltd., Canada Chisachi KATO, University of Tokyo, Japan Andrei LIPEJ, Turboinstitut, Slovenija Torbjørn NIELSEN, NTNU, Norway Romeo SUSAN-RESIGA, 'Politehnica' University Timisoara, Romania Stefan RIEDELBAUCH, Stuggart University, Germany Albert RUPRECHT, Stuttgart University, Germany Qing-Hua SHI, Dong Fang Electrical Machinery Co., China Geraldo TIAGO, Universidade Federal de Itajubá, Brazil International Advisory Committee Shouqi YUAN (principal) Jiangsu University China QingHua SHI (principal) Dong Fang Electrical Machinery Co. China Fidel ARZOLA EDELCA Venezuela Thomas ASCHENBRENNER Voith Hydro GmbH & Co. KG Germany Anton BERGANT Litostroj Power doo Slovenia B C BHAOYAL Research & Technology Centre India Hermod BREKKE NTNU Norway Stuart COULSON Voith Hydro Inc. USA Paul COOPER Fluid Machinery Research Inc USA V A DEMIANOV Power Machines OJSC Russia Bart van ESCH Technische Universiteit Eindhoven Netherland Arno GEHRER Andritz Hydro Graz Austria Akira GOTO Ebara Corporation Japan Adiel GUINZBURG The Boeing Company USA D-H HELLMANN KSB AG Germany Ashvin HOSANGADI Combustion Research and Flow Technology USA Byung-Sun HWANG Korea Institute of Material Science Korea Toshiaki KANEMOTO Kyushu Institute of Technology Japan Mann-Eung KIM Korean Register of Shipping Korea Jiri KOUTNIK Voith Hydro GmbH & Co. KG Germany Jinkook LEE Eaton Corporation USA Young-Ho LEE Korea Maritime University Korea Woo-Seop LIM Hyosung Goodsprings Inc Korea Jun MATSUI Yokohama National University Japan Kazuyoshi Mitsubishi H I Ltd, Japan MIYAGAWA Christophe NICOLET Power Vision Engineering Srl Switzerland Maryse PAGE Hydro

  14. International Linear Collider Technical Review Committee: Second Report, 2003

    Energy Technology Data Exchange (ETDEWEB)

    Loew, Gregory

    2003-02-21

    As this report is being published, the international high energy physics (HEP) community finds itself confronting a set of fascinating discoveries and new questions regarding the nature of matter and its fundamental particles and forces. The observation of neutrino oscillations that indicates that neutrinos have mass, measurements of the accelerating expansion of the universe that may be due to dark energy, and evidence for a period of rapid inflation at the beginning of the Big Bang are stimulating the entire field. Looming on the horizon are the potential discoveries of a Higgs particle that may reveal the origin of mass and of a whole family of supersymmetric particles that may be part of the cosmic dark matter. For the HEP community to elucidate these mysteries, new accelerators are indispensable. At this time, after careful deliberations, all three regional organizations of the HEP community (ACFA in Asia, HEPAP in North America, and ECFA in Europe) have reached the common conclusion that the next accelerator should be an electron-positron linear collider with an initial center-of-mass energy of 500 Giga-electronvolts (GeV), later upgradable to higher energies, and that it should be built and operated in parallel with the Large Hadron Collider under construction at CERN. Hence, this second report of the International Linear Collider Technical Review Committee (ILC-TRC) comes at a very timely moment. The report was requested by the International Committee on Future Accelerators (ICFA) in February 2001 to assess the current technical status of electron-positron linear collider designs in the various regions. Note that the ILC-TRC was not asked to concern itself with either cost studies or the ultimate selection process of a machine. This Executive Summary gives a short outline of the genesis of the report, the charge given to the committee, and its organization. It then presents a brief description of four electron-positron linear collider designs at hand. The

  15. Ambiguous chair

    DEFF Research Database (Denmark)

    Manelius, Anne-Mette

    2011-01-01

    Bidrag til gør-det-selv bog, hvor det beskrives i udførlige tegninger, hvordan man bygger sin egen 'Ambiguous Chair', en tekstilforskallet stol.......Bidrag til gør-det-selv bog, hvor det beskrives i udførlige tegninger, hvordan man bygger sin egen 'Ambiguous Chair', en tekstilforskallet stol....

  16. 75 FR 26743 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2010-05-12

    ... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department...: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under section 807 of... title VIII of EPACT. Tentative Agenda: (Subject to change; updates will be posted on http://hydrogen...

  17. 76 FR 27648 - World Trade Center (WTC) Health Program Scientific/Technical Advisory Committee; Notice of...

    Science.gov (United States)

    2011-05-12

    ... Center (WTC) Health Program Scientific/Technical Advisory Committee; Notice of Establishment Pursuant to... Prevention (CDC), announces the establishment of the World Trade Center (WTC) Health Program Scientific/Technical Advisory Committee. The WTC Health Program shall provide, beginning on July 1, 2011: (1) Medical...

  18. 75 FR 59705 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2010-09-28

    ... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department...: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under section 807 of... Agenda Topics: (Subject to change; updates will be posted on the web at http://hydrogen.energy.gov and...

  19. 76 FR 4645 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2011-01-26

    ... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department...: This notice announces a meeting of the Hydrogen and Fuel Cell Technical Advisory Committee (HTAC). HTAC... Agenda: (Subject to change; updates will be posted on http://hydrogen.energy.gov and copies of the final...

  20. 77 FR 2714 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2012-01-19

    ... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department.... SUMMARY: This notice announces an open meeting of the Hydrogen and Fuel Cell Technical Advisory Committee... posted on http://hydrogen.energy.gov ). Public Comment (10 minutes) Discussion of HTAC's draft annual...

  1. 78 FR 6086 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2013-01-29

    ... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Office of...). SUMMARY: This notice announces an open meeting (Webinar) of the Hydrogen and Fuel Cell Technical Advisory... Avenue, Washington, DC 20585. SUPPLEMENTARY INFORMATION: Purpose of the Committee: The Hydrogen and Fuel...

  2. 76 FR 20948 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-04-14

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors ] and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  3. 77 FR 61737 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-10-11

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  4. 76 FR 323 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-01-04

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda: Public Session: 1. Welcome and...

  5. 78 FR 60251 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-10-01

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. ] Agenda Public Session 1. Welcome and...

  6. 75 FR 62508 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-10-12

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  7. 77 FR 2270 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-01-17

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) ] will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  8. 78 FR 1198 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-01-08

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  9. 75 FR 39920 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-07-13

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  10. 77 FR 23222 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-04-18

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  11. 75 FR 1339 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-01-11

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  12. 78 FR 40098 - Sensors And Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-07-03

    ... Bureau of Industry and Security Sensors And Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  13. 78 FR 19638 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-04-02

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  14. 75 FR 14426 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-03-25

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session 1. Welcome and...

  15. 77 FR 37652 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-06-22

    ... Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory Committee (SITAC) will meet on... applicable to sensors and instrumentation equipment and technology. Agenda Public Session: 1. Welcome and...

  16. Folding chair

    Science.gov (United States)

    Cornell, Howell N.

    1985-08-20

    A foldable chair of the lawn chair type has ground-engaging front and rear legs, attached to and carrying a back frame and seat frame, the back frame and seat frame being pivotally attached to a spreader rod which extends beyond the back and seat frames to bear against one of the leg members when the chair is unfolded. A contact pad mounted on the extending portion of the spreader rod is formed as an externally-contoured bushing fit over the spreader rod and adapted to engage the leg member to restrict side-to-side movement of the spreader rod, with respect to the leg member, when the chair is unfolded.

  17. International Linear Collider Technical Review Committee Report, 1995

    International Nuclear Information System (INIS)

    1995-12-01

    This 1995 report of the International Linear Collider Technical Review Committee is the first attempt to gather in one document the current status of all major e + e - linear collider projects in the world. The report is the result of a collaborative effort of scientists from many laboratories working together over a period of about one year. A short description of the organization, origins and history of the report is given below. To get an idea of the organization, the reader should first refer to the Table of Contents. Chapter 1 is an introduction and general overview of the respective 500 GeV c.m. energy machines. In contrast, Chapter 2, cutting across individual machine boundaries, gives a comparative description and discussion of all the major machine sub-systems as well as particle physics experimentation, showing where these subjects stand today and what additional work needs to be done in the next few years to reach the point where complete design reports can be prepared. Chapter 3 describes the various paths to energy upgrades, and other experimental options (γγ, e - e - , etc.). Chapter 4 gives a short status report of the machine experiments and test facilities being built in the world. Chapter 5 outlines current and other possible areas of collaboration and finally., Chapter 6 summarizes our principal conclusions

  18. International Linear Collider Technical Review Committee Report, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This 1995 report of the International Linear Collider Technical Review Committee is the first attempt to gather in one document the current status of all major e{sup +}e{sup {minus}} linear collider projects in the world. The report is the result of a collaborative effort of scientists from many laboratories working together over a period of about one year. A short description of the organization, origins and history of the report is given below. To get an idea of the organization, the reader should first refer to the Table of Contents. Chapter 1 is an introduction and general overview of the respective 500 GeV c.m. energy machines. In contrast, Chapter 2, cutting across individual machine boundaries, gives a comparative description and discussion of all the major machine sub-systems as well as particle physics experimentation, showing where these subjects stand today and what additional work needs to be done in the next few years to reach the point where complete design reports can be prepared. Chapter 3 describes the various paths to energy upgrades, and other experimental options ({gamma}{gamma}, e{sup {minus}}e{sup {minus}}, etc.). Chapter 4 gives a short status report of the machine experiments and test facilities being built in the world. Chapter 5 outlines current and other possible areas of collaboration and finally., Chapter 6 summarizes our principal conclusions.

  19. 75 FR 23223 - Meetings of the Agricultural Policy Advisory Committee for Trade and the Agricultural Technical...

    Science.gov (United States)

    2010-05-03

    ... Foreign Agricultural Service Meetings of the Agricultural Policy Advisory Committee for Trade and the Agricultural Technical Advisory Committees for Trade AGENCY: Foreign Agricultural Service, USDA. ACTION: Notice... compromise the development by the U.S. government of trade policy priorities, negotiating objectives, or...

  20. Ergonomic Chairs

    Science.gov (United States)

    1997-01-01

    Findings published in the NASA Anthropometric Source Book by Johnson Space Center helped BodyBilt, Inc. to fashion controlled comfort chairs that lessen the harmful effects of gravity on seated workers. Crew members living aboard NASA's Skylab noted that in space the human posture differs from the normal posture caused by the tug of one gravity. There has been an alarming increase in back pain and muscle fatigue in workers, along with a dramatic escalation in repetitive stress injuries. BodyBilt's ergonomically-correct line of office chairs are targeted for the average worker that sits for prolonged periods, be it in the classroom or boardroom. Their roster of national clients lists such organizations as IBM, Microsoft, Texas Instruments, Hewlett-Packard, Eastman-Kodak, Boeing, Motorola, and Walt Disney Studios.

  1. Technical and economic limits to fuel burnup extension. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2002-07-01

    For many years, the increase of efficiency in the production of nuclear electricity has been an economic challenge in many countries which have developed this kind of energy. The increase of fuel burnup leads to a reduction in the volume of spent fuel discharged to longer fuel cycles in the reactor, which means bigger availability and capacity factors. After having increased the authorized burnup in plants, developing new alloys capable of resisting high burnup, and having accumulated data on fuel evolution with burnup, it has become necessary to establish the limitations which could be imposed by the physical evolution of the fuel, influencing fuel management, neutron properties, reprocessing or, more generally, the management of waste and irradiated fuels. It is also necessary to verify whether the benefits of lower electricity costs would not be offset by an increase in fuel management costs. The main questions are: Are technical and economic limits to the increasing of fuel burnup in parallel? Can we envisage nowadays the hardest limitation in some of these areas? Which are the main points to be solved from the technical point of view? Is this effort worthwhile considering the economy of the cycle? To which extent? For these reasons, the IAEA, following a recommendation by the International Working Group on Fuel Performance and Technology, held a Technical Committee Meeting on Technical and Economic Limits to Fuel Burnup Extension. The purpose of this meeting was to provide an international forum to review the evolution of fuel properties at increased burnup in order to estimate the limitations both from a physical and an economic point of view. The meeting was therefore divided into two parts. The first part, focusing on technical limits, was devoted to the improvement of the fuel element, such as fission gas release (FGR), RIM effect, cladding, etc. and the fabrication, core management, spent fuel and reprocessing. Eighteen related papers were presented which

  2. 7 CFR 610.22 - State Technical Committee membership.

    Science.gov (United States)

    2010-01-01

    ... impacts of natural resource conservation techniques and programs to participate as needed. (c) To ensure... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE State Technical... resources agency; (iv) Department of agriculture; (v) Association of soil and water conservation districts...

  3. Cooperation of technical support organizations of state nuclear regulatory committee of Ukraine in sip safety regulation

    International Nuclear Information System (INIS)

    Bikov, V.O.; Kyilochits'ka, T.P.; Bogorins'kij, P.; Vasil'chenko, V.M.; Kondrat'jev, S.M.; Smishlyajeva, S.P.; Troter, D.

    2002-01-01

    The main task of the technical support in the Shelter Implementation Plan (SIP) licensing process consists in Technical Evaluation of SIP projects and documents submitted by the Licensee to State Nuclear Regulatory Committee to substantiate the safety of Shelter-related work. The goal of this task is to evaluate the submitted materials whether they meet the requirements of nuclear and radiation safety

  4. 76 FR 36102 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-06-21

    ... types. The Committee must meet quarterly and should not duplicate the efforts of other Federal advisory... 9008(d)(2)(A)). All nominees will be carefully reviewed for their expertise, leadership, and relevance...

  5. 77 FR 42298 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-07-18

    ... its meetings, coordination, duties, terms, and membership types. The Committee must meet quarterly and... section 9008(d)(2)(A)). All nominees will be carefully reviewed for their expertise, leadership, and...

  6. Proceedings of the first technical committee meeting held in Vienna, Austria, 17-20 November 1987

    International Nuclear Information System (INIS)

    1987-01-01

    This was the first Technical Committee meeting organized by the International Atomic Energy Agency on reactivity transient accidents as a response to recommendations made during the Chernobyl Post Accident Review Meeting (25-29 August 1986) and the subsequent Member States Experts meeting to review the IAEA expanded nuclear safety programme. The Technical Committee meeting was attended by 46 representatives from 28 countries and 1 international organization. The objectives of the Technical Committee meeting were: to review the state of knowledge and to assess the remaining safety questions relating to reactivity initiated accidents (RIAs); to share experience and information on RIA assessment and relevant fuel experiments; to formulate conclusions on what the consensus might be on safety aspects of the RIAs; and to provide recommendations for sharing the technical information and for IAEA assistance to Member States. A separate abstract was prepared for each of the 17 presentations of this meeting. Refs, figs and tabs

  7. 77 FR 47047 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-08-07

    ... Committee Act (Public Law No. 92-463, 86 Stat. 770) requires that agencies publish these notices in the.... ADDRESSES: Renaissance DuPont Hotel, 1143 New Hampshire Avenue, NW., Washington, DC 20037. FOR FURTHER...: In keeping with procedures, members of the public are welcome to observe the business of the Biomass...

  8. Report of the Technical Committee for Hospitality, Tourism, Recreation.

    Science.gov (United States)

    Oregon State Dept. of Education, Salem. Div. of Vocational Education.

    This color-coded committee report identifies the skills and knowledge required by employees in the hospitality/tourism/recreation occupational area. The reports of four subcommittees focused on food/beverage, hotel/motel, recreation/leisure, and travel/tourism skills are also included. Introductory materials include a general statement of the…

  9. Nuclear power plant diagnostics - Safety aspects and licensing. Report of a technical committee meeting. Working material

    International Nuclear Information System (INIS)

    1997-01-01

    The aim of the Technical Committee Meeting (TCM) was to review developed systems and methods in diagnostics in the scope of their impacts and importance to the safety of Nuclear Power Plants. Papers presented on TCM came from different sources, from developers, from manufacturers, from licensing authorities and from NPP personal. They reflect up to date status in the given subject. Participants of TCM formulated three working groups to elaborate different questions which were raised during the discussions. Their results are reflected in the three chapter titles of the given material. Annex 1 to this document contains presentations made at the Technical Committee Meeting. Refs, figs, tabs

  10. Minutes of Technical Division Steering Committee Meeting, September 13, 1955 -- Savannah River Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Evans, L.C.

    1955-09-16

    The Steering Committee approved 8 studies related to separation processes, analytical chemistry, waste handling, and recycle development. Safety and security issues were discussed. Appendices detail the financial status of the Technical Division and estimated man months for development studies approved for the Purex Process, tritium separations, thorium recycle, U-235 separations, and 100-, 200-, and 300-Area studies in analytical chemistry development. The status of 25 other Technical Division studies are listed along with their budget.

  11. The scientific and technical committee on the management of dams in Quebec, Canada

    International Nuclear Information System (INIS)

    1997-01-01

    A Committee of Inquiry, consisting of members of the Canadian Dam Safety Association, was set up by the Government of Quebec following the Saguenay-Lac Saint Jean disaster in July 1996. The report of the Scientific and Technical Committee was published in two volumes. In this English language version Volume 1 contains the report of the Committee, including its conclusions and recommendations on how the management of dams might be improved in the future. Volume 2 contains a series of appendices, mostly of technical data, the report of the Advisory Board and a summary of public hearings held by the Committee. In the course of the Committee's investigation, the basins and physical characteristics of the watersheds that were most heavily impacted were subjected to intense examination. An examination of the existing framework and regulations for the management of the structures, and a thorough evaluation of the structures themselves, were also part of the inquiry. It was concluded that the flood was an exceptional phenomenon, one that the existing infrastructure and services were never built to resist. The inquiry also reviewed existing infrastructure codes adopted by the Ministry of Transportation, and probed the responsibilities of the government, the owners, and the regional and municipal authorities. Finally, the committee provided a series of recommendations for a much stricter framework for the design, surveillance and management of water retaining works, designed to prevent recurrence of the 1996 disaster. tabs., figs

  12. 78 FR 65265 - Materials Technical Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2013-10-31

    ... BIS senior management and export control reform update. 3. Presentation from DuPont on the challenges... NW., Washington, DC. The Committee advises the Office of the Assistant Secretary for Export Administration with respect to technical questions that affect the level of export controls applicable to...

  13. IAEA technical committee meeting on research using small fusion devices (abstracts)

    International Nuclear Information System (INIS)

    1999-12-01

    The thirteenth IAEA technical committee meeting on research using small fusion devices are held in Chengdu, P. R. China on 18-20 Oct. , 1999. 41 articles are received and the content includes toroidal systems, helical systems, plasma focus, diagnostic systems, theory and modeling, improving confinement, numerical simulation, innovative concepts and others

  14. 75 FR 2860 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2010-01-19

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Hydrogen and Fuel Cell... Energy. ACTION: Notice of Open Meeting. SUMMARY: The Hydrogen and Fuel Cell Technical Advisory Committee... change; updates will be posted on http://hydrogen.energy.gov and copies of the final agenda will...

  15. 77 FR 65542 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2012-10-29

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Hydrogen and Fuel Cell... Energy. ACTION: Notice of Open Meeting. SUMMARY: The Hydrogen and Fuel Cell Technical Advisory Committee... Agenda: (updates will be posted on the web at: http://hydrogen.energy.gov ). Public Comment DOE Program...

  16. 76 FR 63607 - Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-10-13

    ...] [FR Doc No: 2011-26009] DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation... that affect the level of export controls applicable to sensors and instrumentation equipment and...

  17. 21 CFR 14.84 - Nominations and selection of nonvoting members of standing technical advisory committees.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Nominations and selection of nonvoting members of... Advisory Committees § 14.84 Nominations and selection of nonvoting members of standing technical advisory... Oversight and Management Staff, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 32, rm. 1503...

  18. Report of the Subcommittee for Travel/Tourism of the Hospitality/Tourism/Recreation Technical Committee.

    Science.gov (United States)

    Oregon State Dept. of Education, Salem. Div. of Vocational Education.

    Written by a technical committee's industry representatives, state officials, and educators in Oregon, this document lists the skills and knowledge required by employees in travel and tourism occupations. The following occupations are considered: rental representative; service agent; travel agent; bus/tour/driver/guide/sightseeing leader; manager…

  19. Technical committee on transport package test standards, Tokyo, Japan, 28 September - 2 October 1981

    International Nuclear Information System (INIS)

    Ek, P.

    The Technical Committee looked into the following tasks: a) the additional 200 m water immersion test for packages designed for irradiated fuel when the activity exceeds 10 6 Ci; b) the proposed addition of a crush test for light weight Type B and fissile materials packages; c) the proposed new text for thermal test

  20. DOE Advanced Scientific Computing Advisory Committee (ASCAC) Subcommittee Report on Scientific and Technical Information

    Energy Technology Data Exchange (ETDEWEB)

    Hey, Tony [eScience Institute, University of Washington; Agarwal, Deborah [Lawrence Berkeley National Laboratory; Borgman, Christine [University of California, Los Angeles; Cartaro, Concetta [SLAC National Accelerator Laboratory; Crivelli, Silvia [Lawrence Berkeley National Laboratory; Van Dam, Kerstin Kleese [Pacific Northwest National Laboratory; Luce, Richard [University of Oklahoma; Arjun, Shankar [CADES, Oak Ridge National Laboratory; Trefethen, Anne [University of Oxford; Wade, Alex [Microsoft Research, Microsoft Corporation; Williams, Dean [Lawrence Livermore National Laboratory

    2015-09-04

    The Advanced Scientific Computing Advisory Committee (ASCAC) was charged to form a standing subcommittee to review the Department of Energy’s Office of Scientific and Technical Information (OSTI) and to begin by assessing the quality and effectiveness of OSTI’s recent and current products and services and to comment on its mission and future directions in the rapidly changing environment for scientific publication and data. The Committee met with OSTI staff and reviewed available products, services and other materials. This report summaries their initial findings and recommendations.

  1. Energy Materials Coordinating Committee (EMaCC): Annual technical report, Fiscal year 1987

    International Nuclear Information System (INIS)

    1988-09-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1987 and describes the materials research programs of various offices and divisions within the Department

  2. Technical committee meeting on evaluation of radioactive materials release and sodium fires in fast reactors

    International Nuclear Information System (INIS)

    1996-01-01

    The objectives of the Technical Committee Meeting was to review the activities of research on radioactive materials release and sodium fires in fast reactors in each of the participating countries. It covered: out-of-pile experiments and analysis codes on source term; in-pile experiments on source term; core disruptive accidents; sodium leak experience in liquid metal fast reactors; evaluation of sodium fire; and aerosol behaviour

  3. H2 at Scale: Benefitting our Future Energy System - Update for the Hydrogen Technical Advisory Committee

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, Mark

    2016-12-06

    Hydrogen is a flexible, clean energy carrying intermediate that enables aggressive market penetration of renewables while deeply decarbonizing our energy system. H2 at Scale is a concept that supports the electricity grid by utilizing energy without other demands at any given time and also supports transportation and industry by providing low-priced hydrogen to them. This presentation is an update to the Hydrogen Technical Advisory Committee (HTAC).

  4. Energy Materials Coordinating Committee (EMaCC). Annual technical report, Fiscal Year 2001

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations.

  5. Safety of and regulations for nuclear fuel cycle facilities. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-05-01

    In order to compile information on the nature of the safety concerns and current status of the regulations concerning nuclear fuel cycle facilities in Member States, an IAEA Technical Committee meeting on this topic was convened from 8 to 12 May 2000 in Vienna. The present publication contains the results of this meeting. The contributions of the participants in Annex 3 exemplify the work done in some Member States to develop an adequate regulatory framework to oversee the safe operation of these facilities

  6. Technical committee on transport package test standards (for radioactive materials transport). Vienna, 6-10 August 1979

    International Nuclear Information System (INIS)

    White, M.C.

    1979-11-01

    The report of a meeting of the technical committee on transport package test standards is presented. The committee assigned high priority to work on Low Level Solid material and Low Specific Activity material, on the justification for and requirements of a Crush Test and on leakage from packages

  7. Tilting a Wobbly Chair

    Science.gov (United States)

    Cross, Rod

    2017-01-01

    If a small object is placed under the front leg of a chair, the chair tilts backwards. If the object is placed under a rear leg, the chair tilts sideways. The effect is surprising but can be analysed in terms of elementary physics.

  8. Energy Materials Coordinating Committee (EMaCC): Fiscal year 1996. Annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. The EMaCC reports to the Director of the Office of Energy Research in his or her capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1996 and describes the materials research programs of various offices and divisions within the Department.

  9. Energy Materials Coordinating Committee (EMaCC): Fiscal year 1996. Annual technical report

    International Nuclear Information System (INIS)

    1997-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. The EMaCC reports to the Director of the Office of Energy Research in his or her capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1996 and describes the materials research programs of various offices and divisions within the Department

  10. 17 January 2011 - British (Cambridge) Trustee of the London Science Museum Chair of the Management Committee of the Newton Institute for Mathematical Sciences H. Covington in the LHCB underground experimental area with A. Schopper; signing the guest book with Director for Accelerators and Technology S. Myers; throughout accompanied by R. Veness.

    CERN Multimedia

    Maximilien Brice

    2011-01-01

    17 January 2011 - British (Cambridge) Trustee of the London Science Museum Chair of the Management Committee of the Newton Institute for Mathematical Sciences H. Covington in the LHCB underground experimental area with A. Schopper; signing the guest book with Director for Accelerators and Technology S. Myers; throughout accompanied by R. Veness.

  11. 6 March 2013 - Committee for Employment and Learning, Northern Ireland Legislative Assembly, United Kingdom of Great Britain and Northern Ireland in the LHC tunnel and visiting the LHCb experiment at LHC Point 8. Director for Accelerators and Technology S. Myers with Vice-Chair T. Buchanan.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    6 March 2013 - Committee for Employment and Learning, Northern Ireland Legislative Assembly, United Kingdom of Great Britain and Northern Ireland in the LHC tunnel and visiting the LHCb experiment at LHC Point 8. Director for Accelerators and Technology S. Myers with Vice-Chair T. Buchanan.

  12. Shoulder Arthroscopy in the Beach Chair Position.

    Science.gov (United States)

    Higgins, John D; Frank, Rachel M; Hamamoto, Jason T; Provencher, Matthew T; Romeo, Anthony A; Verma, Nikhil N

    2017-08-01

    Arthroscopic shoulder surgery can be performed in both the beach chair and lateral decubitus positions. The beach chair position is a reliable, safe, and effective position to perform nearly all types of shoulder arthroscopic procedures. The advantages of the beach chair position include the ease of setup, limited brachial plexus stress, increased glenohumeral and subacromial visualization, anesthesia flexibility, and the ability to easily convert to an open procedure. This position is most commonly used for rotator cuff repair, subacromial decompression, and superior labrum anterior-to-posterior repair procedures. To perform arthroscopy surgery in the beach chair position successfully, meticulous care during patient positioning and setup must be taken. In this Technical Note, we describe the necessary steps to safely and efficiently prepare patients in the beach chair position for arthroscopic shoulder surgery.

  13. 36 CFR 1151.6 - Committees.

    Science.gov (United States)

    2010-07-01

    ... review all committee charters. (2) Chair. The Vice-Chair of the Board shall serve as Chair of the... communication equipment which enables all persons participating in the meeting to communicate with each other. (e) Charter. With the exception of a Committee of the Whole, each committee shall establish a charter...

  14. Establishment of strengthening technical cooperation system through the IAEA advisory committee

    International Nuclear Information System (INIS)

    Kim, Si Hwan; Lee, H. Y.; Kim, Y. T. and others

    2001-03-01

    The International Atomic Energy Agency(IAEA) operates seventeen(17) Standing Advisory Groups(SAG) and nine(9) International Working Groups(IWG). Korean experts are currently participating in most of these advisory groups, but there is something yet to improve especially in faithful reflection of Korean nuclear policy as well as a systematic and effective utilization technical information received in the committee meetings. Therefore, it is necessary firstly to analyze results and systematic follow-up of technology developments for each IAEA committee group to solidate activities of Korean members. Based on these analyses, we can hence support administratively Korean members to do faithful reflection of Korean nuclear policy. In addition, a scheme for systematic management of the information should be drawn up for use of these information effectively for nuclear power projects, R and D, safety regulation, and establishment of nuclear policy in Korea

  15. Establishment of strengthening technical cooperation system through the IAEA advisory committee

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Si Hwan; Lee, H. Y.; Kim, Y. T. and others

    2001-03-01

    The International Atomic Energy Agency(IAEA) operates seventeen(17) Standing Advisory Groups(SAG) and nine(9) International Working Groups(IWG). Korean experts are currently participating in most of these advisory groups, but there is something yet to improve especially in faithful reflection of Korean nuclear policy as well as a systematic and effective utilization technical information received in the committee meetings. Therefore, it is necessary firstly to analyze results and systematic follow-up of technology developments for each IAEA committee group to solidate activities of Korean members. Based on these analyses, we can hence support administratively Korean members to do faithful reflection of Korean nuclear policy. In addition, a scheme for systematic management of the information should be drawn up for use of these information effectively for nuclear power projects, R and D, safety regulation, and establishment of nuclear policy in Korea.

  16. Creep-fatigue damage rules for advanced fast reactor design. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-03-01

    The IAEA, following the recommendations of the International Working Group on Fast Reactors, convened a Technical Committee Meeting on Creep-Fatigue Damage Rules to be used in Fast Reactor Design. The objective of the meeting was to review developments in design rules for creep-fatigue conditions and to identify any areas in which further work would be desirable. The meeting was hosted by AEA Technology, Risley, and held in Manchester, United Kingdom, 11-13 June 1996. It was attended by experts from the European Commission, France, India, Japan, the Republic of Korea, the Russian Federation and the United Kingdom. Refs, figs, tabs

  17. IAEA International Database on Irradiated Nuclear Graphite Properties. 6th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2004-12-01

    This report summarizes the Consultant Meeting 6th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 September 2004 at Plas Tan-Y-Bwlch, Maentwrog, Gwynedd, UK. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  18. Energy Materials Coordinating Committee (EMaCC) Fiscal Year 1999 annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-10-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1999 and describes the materials research programs of various offices and divisions within the Department.

  19. IAEA International Database on Irradiated Nuclear Graphite Properties. 7th meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2005-06-01

    This report summarizes the Consultant Meeting '7th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties' held on 16-17 March 2005 at the IAEA Headquarters, Vienna, Austria. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database and to make recommendations for actions for the next year. The purposes of the meeting were fully met. This report contains the current status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  20. Assessment of uranium deposit types and resources - A worldwide perspective. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-12-01

    The Technical Committee Meeting on Recent Development in Uranium Resources, Production and Demand was held in Vienna from 10 to 13 June 1997. The meeting, held in co-operation with the OECD Nuclear Energy Agency, was successful in bringing together 41 specialists representing 22 Member States and one non-governmental organization (Uranium Institute). A total of 23 papers were presented that report historical reviews and recent developments in the uranium related activities in their respective countries. Each of the papers was indexed separately

  1. Conceptual designs of advanced fast reactor. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1996-10-01

    A Technical Committee meeting (TCM) was held on Conceptual Designs of Advanced Fast Power Reactors to review the lessons learned from the construction and operation of demonstration and near-commercial size plants. This TCM focused on design and development of advanced fast reactors and identified methodologies to evaluate the economic competitiveness and reliability of advanced projects. The Member States which participated in the TCM were at different stages of LMFR development. The Russian Federation, Japan and India had prototype and/or experimental LMFRs and continue with mature R and D programmes. China, the Republic of Korea and Brazil were at the beginning of LMFR development. Therefore the aims of the TCM were to obtain technical descriptions of different design approaches for experimental, prototype, demonstration and commercial LMFRs, and to describe the engineering judgements made in developing the design approaches. Refs, figs, tabs

  2. Small reactors with simplified design. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-11-01

    There is a potential future need for small reactors for applications such as district heating, electricity production at remote locations and desalination. Nuclear energy can provide an environmentally benign alternative to meet these needs. For successful deployment, small reactors must satisfy the requirements of users, regulators and the general public. The IAEA has been following the developments in the field of small reactors as a part of the sub-programme on advanced reactor technology. In accordance with the interests of Member States, a Technical Committee meeting (TCM) was organized in Mississauga, Ontario, Canada, 15-19 May 1995 to discuss the status of designs and design requirements related to small reactors for diverse applications. The papers presented at the TCM and a summary of the discussions are contained in this TECDOC which, it is hoped, will serve the Member States as a useful source of technical information on the development of small reactors with simplified design

  3. Practices and developments in spent fuel burnup credit applications. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2003-10-01

    The International Atomic Energy Agency convened a technical committee Meeting on Requirements, Practices and Developments in Burnup Credit (BUC) Applications in Madrid, Spain, from 22 to 26 April 2002. The purpose of this meeting was to explore the progress and status of international activities related to the BUC applications for spent nuclear fuel. This meeting was the third major meeting on the uses of BUC for spent fuel management systems held since the IAEA began to monitor the uses of BUC in spent fuel management systems in 1997. The first major meeting was an Advisory Group meeting (AGM), which was held in Vienna, in October 1997. The second major meeting was a technical committee meeting (TCM), which was held in Vienna, in July 2000. Several consultants meetings were held since 1997 to advise and assist the IAEA in planning and conducting its BUC activities. The proceedings of the 1997 AGM were published as IAEA-TECDOC-1013, and the proceedings of the 2000 TCM as IAEA-TECDOC-1241. BUC for wet and dry storage systems, spent fuel transport, reprocessing and final disposal is needed in many Member States to allow for increased enrichment, and to increase storage capacities, cask capacities and dissolver capacities avoiding the need for extensive modifications. The use of BUC is a necessity for spent fuel disposal

  4. 4 CFR 27.2 - The Chair, Vice Chair.

    Science.gov (United States)

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false The Chair, Vice Chair. 27.2 Section 27.2 Accounts...; ORGANIZATION § 27.2 The Chair, Vice Chair. The members of the Board shall select from among its membership a Chairperson, hereinafter the Chair, who shall serve as the chief executive and administrative officer of the...

  5. Energy Materials Coordinating Committee (EMaCC): Annual technical report, fiscal year 1988

    Energy Technology Data Exchange (ETDEWEB)

    None

    1989-06-30

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. Four topical subcommittees are established and are continuing their own programs: Structural Ceramics, Batteries and Fuel Cells, Radioactive Waste Containment, and Superconductivity (established in FY 1987). In addition, the EMaCC aids in obtaining materials-related inputs for both intra- and interagency compilations. Membership in the EMaCC is open to any Department organizational unit; participants are appointed by Division or Office Directors. The current active membership is listed on the following four pages. The EMaCC reports to the Director of the Office of Energy Research in his capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1988 and describes the materials research programs of various offices and divisions within the Department.

  6. Energy materials coordinating committee (EMACC) Fiscal Year 1982. Annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1983-03-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/ workshops on selected topics involving both DOE and major contractors. In addition, the EMaCC aids in obtaining materials - related inputs for both intra- and interagency compilations. Membership in the EMaCC is open to any Department organizational unit; participants are appointed by Division or Office Directors. The current membership is listed in Table 1. The EMACC reports to the Director of the Office of Energy Research in his capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMACC terms of reference. In this report are described 1) EMACC activities for FY 1982; 2) a summary of materials funding in the Department from FY 1978 to the present; and 3) on-going materials programs in the Department.

  7. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2003

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2004-10-18

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed.

  8. Unusual occurrences during LMFR operation. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2000-10-01

    Design of liquid metal cooled fast reactors (LMFRs) is still in evolution, and only a small number of LMFRs are in operation around the world. Specialists operating these LMFRs have gained valuable experience from incidents, failures, and other events that took place in the reactors. These unusual occurrences, lessons learned and measures undertaken to prevent recurrences are often either not reported in the literature, or reported only briefly and without sufficient detail. Hence there is a need for specialists designing and operating LMFRs to share their knowledge on unusual occurrences. Considerable experimental and theoretical knowledge in this field were collected by several Member states over the past decades. The needs in generalisation, review and documentation of fundamental knowledge in liquid metal cooled reactor technology were a major consideration in the recommendation by the International Working group on fast reactors for the IAEA to convene this Technical Committee meeting on the subject of unusual occurrences during LMFR operation and the consequences for reactor systems

  9. Recycling of plutonium and uranium in water reactor fuel. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-05-01

    The Technical Committee Meeting on Recycling of Plutonium and Uranium in Water Reactor Fuel was recommended by the International Working Group on Fuel Performance and Technology (IWGFPT). Its aim was to obtain an overall picture of MOX fabrication capacity and technology, actual performance of this kind of fuel, and ways explored to dispose of the weapons grade plutonium. The subject of this meeting had been reviewed by the International Atomic Energy Agency every 5 to 6 years and for the first time the problem of weapons grade plutonium disposal was included. The papers presented provide a summary of experience on MOX fuel and ongoing research in this field in the participating countries. The meeting was hosted by British Nuclear Fuels plc, at Newby Bridge, United Kingdom, from 3 to 7 July 1995. Fifty-six participants from twelve countries or international organizations took part. Refs, figs, tabs

  10. Energy Materials Coordinating Committee (EMaCC): Annual technical report, fiscal year 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1993 and describes the materials research programs of various offices and divisions within the Department. The program descriptions consist of a funding summary for each Assistant Secretary office and the Office of Energy Research, and detailed project summaries with project goals and accomplishments. The FY 1993 budget summary table for DOE Materials Activities in each of the programs is presented.

  11. Floating nuclear energy plants for seawater desalination. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-05-01

    Floating nuclear desalination facilities are one of the alternatives being considered. They may offer a particularly suitable choice for remote locations and small island or coastal communities where the necessary manpower and infrastructure to support desalination plants are not available. In the interest of focusing specific attention on the technology of floating nuclear desalination, the IAEA sponsored a Technical Committee Meeting on Floating Nuclear Plants for Seawater Desalination from 29 to 31 May 1995 in Obninsk, Russian Federation. This publication documents the papers and presentations given by experts from several countries at that meeting. It is hoped that the information contained in this report will be a valuable resource for those interested in nuclear desalination, and that it will stimulate further interest in the potential for floating nuclear desalination facilities. Refs, figs, tabs

  12. Proceedings of the 6th IAEA Technical Committee meeting on energetic particles in magnetic confinement systems

    International Nuclear Information System (INIS)

    2000-03-01

    The sixth IAEA Technical Committee Meeting was organized by Japan Atomic Energy Research Institute. It was held at Naka, JAERI during October 12-14, 1999. The previous meetings of this series, formerly entitled 'Alpha Particles in Fusion Research', were held biennially in Kiev (1989), Aspenas (1991), Trieste (1993), Princeton (1995), and Abingdon (1997). The scope of the meeting covered theoretical and experimental work on alpha particle physics, transport of energetic particles, effects of energetic particles on fusion plasma, related collective phenomena, runaway electrons in disruption and diagnostics on energetic particles. The TCM was attended by over 60 participants. Twenty seven papers were presented orally and 19 papers as posters. This proceedings include 37 contributed papers in the meeting. (J.P.N.)

  13. Review of design approaches of advanced pressurized LWRs. Report of a technical committee meeting and workshop

    International Nuclear Information System (INIS)

    1996-01-01

    The Technical Committee Meeting and Workshop was devoted to review and discuss differences and commonalties in the various design approaches with the aim of increasing the understanding of the design decisions taken, and a number of general conclusions were drawn. Though many differences in design approaches were found in the presentations, a number of common features could also be identified. These included design approaches to achieve further improvements with respect to safety, design simplification, reduction in cost, incorporation of feedback from operating experience, and control room improvements regarding human factors and digitization. Design approaches to achieve further improvements in safety included consideration of severe accidents in the design process, increased thermal margins and water inventories, longer grace periods and double containments. Refs, figs and tabs

  14. Use of PSA Level 2 analysis for improving containment performance. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    1998-03-01

    In order to discuss and exchange experience on different aspects of methods associated with Level 2 PSA and its applications for improving containment performance, the IAEA held a Technical Committee meeting in Vienna in December 1996. The meeting, which was attended by 26 participants from 20 Member States, provided a broad forum for discussion. The meeting addressed the issues related to the actual performance of Level 2 PSA studies as well as the insights gained from applications to improve containment performance. Particular attention was given to studies and applications for WWER type reactors, for which Level 2 work is still in its early stages, and for channel type reactors where modelling of accident progression is complex and significantly different from vessel type light water reactors. This TECDOC contains the papers presented at the meeting and the results of extensive discussions which were held in specific working groups

  15. Implementation of burnup credit in spent fuel management systems. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-08-01

    The purpose of this Technical Committee Meeting was to explore the status of international activities related to the use of burnup credit for spent fuel applications. This was the second major meeting on the issues of burnup credit for spent fuel management systems held since the IAEA began to monitor the uses of burnup credit in spent fuel management systems in 1997. Burnup credit for wet and dry storage systems is needed in many Member States to allow for increased initial fuel enrichment, and to increase the storage capacity and thus to avoid the need for extensive modifications of the spent fuel management systems involved. This document contains 31 individual papers presented at the Meeting; each of the papers was indexed separately

  16. Behaviour of LWR core materials under accident conditions. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1996-12-01

    At the invitation of the Government of the Russian Federation, following a proposal of the International Working Group on Water Reactor Fuel Performance and Technology, the IAEA convened a Technical Committee Meeting on Behaviour of LWR Core Materials Under Accident Conditions from 9 to 13 October 1995 in Dimitrovgrad to analyze and evaluate the behaviour of LWR core materials under accident conditions with special emphasis on severe accidents. In-vessel severe accidents phenomena were considered in detail, but specialized thermal hydraulic aspects as well as ex-vessel phenomena were outside the scope of the meeting. Forty participants representing eight countries attended the meeting. Twenty-three papers were presented and discussed during five sessions. Refs, figs, tabs

  17. Proceedings of the 6th IAEA Technical Committee meeting on energetic particles in magnetic confinement systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The sixth IAEA Technical Committee Meeting was organized by Japan Atomic Energy Research Institute. It was held at Naka, JAERI during October 12-14, 1999. The previous meetings of this series, formerly entitled 'Alpha Particles in Fusion Research', were held biennially in Kiev (1989), Aspenas (1991), Trieste (1993), Princeton (1995), and Abingdon (1997). The scope of the meeting covered theoretical and experimental work on alpha particle physics, transport of energetic particles, effects of energetic particles on fusion plasma, related collective phenomena, runaway electrons in disruption and diagnostics on energetic particles. The TCM was attended by over 60 participants. Twenty seven papers were presented orally and 19 papers as posters. This proceedings include 37 contributed papers in the meeting. (J.P.N.)

  18. Diagnostic systems in nuclear power plants. Proceedings of a technical committee meeting. Working material

    International Nuclear Information System (INIS)

    1998-01-01

    Nuclear power industry has a quite long tradition in on-line diagnostic of mechanical components and a considerable effort was put in developing diagnostic systems which are able to detect arising mechanical problems at an early stage. Computers are increasingly exploited to provide higher level information on process behaviour such as: early indication of the process deviation from normal conditions; rapid identification of the cause of any disturbance; prediction of the evolution of a disturbance; operator aid through computerized help. Following the recommendation of Several Member States to strengthen the activity in this field two divisions of IAEA established in 1995 the International Task Force on Nuclear Power Plant Diagnostics. The scope of the task force cover both technological developments and safety/licensing aspects of diagnostics. This report contains papers presented at the last in the series of Technical Committee Meetings on the Diagnostic Systems in Nuclear Power Plants organized in the framework of International Task Force

  19. 41th Plenary Meeting Report of the Scientific, Technical and Economic Committee for Fisheries (PLEN-12-03)

    DEFF Research Database (Denmark)

    Abella, J. A.; Andersen, J.; Bailey, N.

    The Scientific, Technical and Economic Committee for Fisheries hold its 41st plenary on 5-9 November 2012 in Brussels (Belgium). The terms of reference included both issues assessments of STECF Expert Working Group reports and additional requests submitted to the STECF by the Commission. Topics...... dealt were inter alia assessments of Mediterranean and Black Sea stocks, evaluations of fishing effort regimes, technical measures, review of scientific advice on stocks and fisheries of EU interest, fisheries management plans evaluation issues....

  20. Gas turbine power conversion systems for modular HTGRs. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-08-01

    The Technical Committee Meeting (TCM) on Gas Turbine Power Conversion Systems for Modular HTGRs held in Palo Alto, California, USA was convened by the IAEA on the recommendation of its International Working Group on Gas Cooled Reactors (IWGGCR). The meeting was attended by 27 participants from 9 Member States (Argentina, China, France, Japan, Netherlands, Russian Federation, South Africa, United Kingdom and the United States of America). In addition to presentations on relevant technology development activities in participating Member States, 16 technical papers were presented covering the areas of: Power conversion system design; Power conversion system analysis; and Power conversion system component design. A panel discussion was held on technology issues associated with gas turbine modular HTGR power conversion systems and the potential for international collaboration to address these issues. The purpose of this Technical Committee Meeting was to foster the international exchange of information and perspectives on gas turbine power conversion systems and components for modular HTGRs. The overall objectives were to provide: a current overview of designs under consideration; information on the commercial availability or development status of key components; exchange of information on the issues involved and potential solutions; identification of further development needs for both initial deployment and longer term performance enhancement, and the potential for addressing needs through international collaboration. The following conclusions and recommendations were identified as a result of the discussions at the meeting. International review and collaboration is of interest for China and Japan in the planning and conduct of their test programs: both the HTTR and HTR-10 reactor projects are exploring scale model testing of a gas turbine, with the HTTR project considering a 7 MWt gas heated loop, and HTR-10 a direct or indirect cycle connected to the reactor; the HTR

  1. External evaluation on Monju Core Confirmation Test in FY 2010 (the Technical Committee on Monju Research Utilization)

    International Nuclear Information System (INIS)

    2011-06-01

    This report describes the review made by the 'Technical Committee on Monju Research Utilization' on the results of Core Confirmation Test conducted from May to July in 2010. The committee consists of technical specialists in the relevant engineering domains from various Japanese industries and universities. The Committee was convened twice in 2010, in August and December, where the each item of the Core Confirmation Test was explained by individual personnel in charge, and the outline and the detailed analysis were discussed, respectively. Evaluations were made by the Committee after the questions and answers. Main points of the evaluations are listed below: After the 14 year stand-by, the Core Confirmation Test has been successfully completed within a brief duration of 3 months, with provision of precious technical data for future development and commercialization of FBRs. Safety has been confirmed and valuable data for analysis code validation have been acquired on an FBR core containing 1.5%wt of Am-241. It is significant that the newly released nuclear data library, JENDL-4.0 has been validated based on studies of capture cross section of Am-241 and of fission cross section of Pu-239. Finally, the chief examiner of the Committee stated his expectation for advancement of Japanese FBR technologies with the JAEA's leadership based of achievements on Monju, to be reflected on subsequent FBR developments. (author)

  2. The Jepara Chairs Based on Their Style and Period

    Directory of Open Access Journals (Sweden)

    Octaviana S.C. Rombe

    2016-04-01

    Full Text Available The purpose of this article was to identify the Jepara chairs based on its style and period. Qualitative research such as doing interviews with the Jepara chairs observer, observation to some centres and workshops of Jepara chairs, literature study from various books consisting the style and process of Jepara chairs production were conducted. The identification of Jepara chairs started with Islamic and Hinduism influence in the 16th to the 17th century when the missionary and sailor from Portuguese entered Java until the style of Jepara chair in the 20th century. The alteration that mirrors the changes in socio-cultural aspect was being analysed as the style foundation that was used periodically in the making of the Jepara chairs. The categories a chair to have a Jepara style is a chair made by the craftsman in Jepara that, includes local factors both technically and material based that is combined with foreign culture, religion, and designs that brought at the time the chairs have been made. This research finds that chairs with Jepara style are a combination of the international world with a glimpse of local wisdom, with a touch of the maker’s personality that makes it unique and a bit different with its origin style. 

  3. [White House Conference on Aging, 1981. Research in Aging. Report and Executive Summary of the Technical Committee.

    Science.gov (United States)

    Birren, James E.; And Others

    This Technical Committee Report provides an overview and historical sketch of research in aging and proposes a need for new knowledge. An examination of key issues notes the difficulty in assigning priority to research topics, and identifies emerging issues of public concern including: (1) physical health (alcohol and drugs, falls and accidents,…

  4. 44th Plenary Meeting Report of the Scientific, Technical and Economic Committee for Fisheries (PLEN-13-03)

    DEFF Research Database (Denmark)

    Casey, J.; Abella, J. A.; Andersen, J.

    The Scientific, Technical and Economic Committee for Fisheries hold its 44th plenary on 4-8 November 2013 in Brussels (Belgium). The terms of reference included both issues assessments of STECF Expert Working Group reports and additional requests submitted to the STECF by the Commission. Topics...

  5. 40th Plenary Meeting Report of the Scientific, Technical and Economic Committee for Fisheries (PLEN-12-02)

    DEFF Research Database (Denmark)

    Abella, J. A.; Andersen, J.; Bailey, N.

    The Scientific, Technical and Economic Committee for Fisheries hold its 40th plenary on 9-13 July 2012 in Copenhagen (Denmark). The terms of reference included both issues assessments of STECF Expert Working Group reports and additional requests submitted to the STECF by the Commission. Topics...

  6. 42nd Plenary Meeting Report of the Scientific, Technical and Economic Committee for Fisheries (PLEN-13-01)

    DEFF Research Database (Denmark)

    Casey, J.; Abella, J. A.; Andersen, J.

    The Scientific, Technical and Economic Committee for Fisheries hold its 42nd plenary on 8-12 April 2013 in Brussels (Belgium). The terms of reference included both issues assessments of STECF Expert Working Group reports and additional requests submitted to the STECF by the Commission. Topics dealt...

  7. 39th Plenary Meeting Report of the Scientific, Technical and Economic Committee for Fisheries (PLEN-12-01)

    DEFF Research Database (Denmark)

    Abella, J. A.; Andersen, J.; Bailey, N.

    The Scientific, Technical and Economic Committee for Fisheries hold its 39th plenary on 16-20 April 2012 in Brussels (Belgium). The terms of reference included both issues assessments of STECF Expert Working Group reports and additional requests submitted to the STECF by the Commission. Topics...

  8. 43rd Plenary Meeting Report of the Scientific, Technical and Economic Committee for Fisheries (PLEN-13-01)

    DEFF Research Database (Denmark)

    Casey, J.; Abella, J. A.; Andersen, J.

    The Scientific, Technical and Economic Committee for Fisheries hold its 43rd plenary on 8-12 July 2013 in Brussels (Belgium). The terms of reference included both issues assessments of STECF Expert Working Group reports and additional requests submitted to the STECF by the Commission. Topics dealt...

  9. Integral design concepts of advanced water cooled reactors. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-11-01

    Under the sub-programme on non-electrical applications of advanced reactors, the International Atomic Energy Agency has been providing a worldwide forum for exchange of information on integral reactor concepts. Two Technical Committee meetings were held in 1994 and 1995 on the subject where state-of-the-art developments were presented. Efforts are continuing for the development of advanced nuclear reactors of both evolutionary and innovative design, for electricity, co-generation and heat applications. While single purpose reactors for electricity generation may require small and medium sizes under certain conditions, reactors for heat applications and co-generation would be necessary in the small and medium range and need to be located closer to the load centres. The integral design approach to the development of advanced light water reactors has received special attention over the past few years. Several designs are in the detailed design stage, some are under construction, one prototype is in operation. A need has been felt for guidance on a number of issues, ranging from design objectives to the assessment methodology needed to show how integral designs can meet these objectives, and also to identify their advantages and problem areas. The technical document addresses the current status of the design, safety and operational issues of integral reactors and recommends areas for future development

  10. Organizational factors influencing human performance in nuclear power plants. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-05-01

    In 1991 a Safety Series report on Safety Culture of the International Nuclear Safety Advisory Group (INSAG) was published as 75-INSAG-4 by the IAEA. This report deals with the concept of Safety Culture as it relates to organizations and individuals involved in the operations of nuclear power plants (NPPs). Generally, the role of management and organization in assuring the safe operation of NPPs has been widely recognized and its importance accepted. However, the understanding of what constitutes effective management and organization the area of safety is less developed than the understanding of most of the technical issues which plant operators and regulatory bodies are confronted with. The Technical Committee meeting provided a forum for a broad exchange of information on practices and experiences in the area of organization and management to accomplish operational safety in NPPs and thus enhance Safety Culture. This report and the papers presented at the meeting discuss those factors which influence and improve human performance covering both aspects, i.e. the basic requirements imposed on the operator and the ways of managerial support which enhance the reliable and safety oriented performance of operators. Refs, figs, tabs

  11. High temperature gas cooled reactor technology development. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-12-01

    The successful introduction of an advanced nuclear power plant programme depends on many key elements. It must be economically competitive with alternative sources of energy, its technical development must assure operational dependability, the support of society requires that it be safe and environmentally acceptable, and it must meet the regulatory standards developed for its use and application. These factors interrelate with each other, and the ability to satisfy the established goals and criteria of all of these requirements is mandatory if a country or a specific industry is to proceed with a new, advanced nuclear power system. It was with the focus on commercializing the high temperature gas cooled reactor (HTGR) that the IAEA's International Working Group on Gas Cooled Reactors recommended this Technical Committee Meeting (TCM) on HTGR Technology Development. Over the past few years, many Member States have instituted a re-examination of their nuclear power policies and programmes. It has become evident that the only realistic way to introduce an advanced nuclear power programme in today's world is through international co-operation between countries. The sharing of expertise and technical facilities for the common development of the HTGR is the goal of the Member States comprising the IAEA's International Working Group on Gas Cooled Reactors. This meeting brought together key representatives and experts on the HTGR from the national organizations and industries of ten countries and the European Commission. The state electric utility of South Africa, Eskom, hosted this TCM in Johannesburg, from 13 to 15 November 1996. This TCM provided the opportunity to review the status of HTGR design and development activities, and especially to identify international co-operation which could be utilized to bring about the commercialization of the HTGR

  12. Performance of operating and advanced light water reactor designs. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-10-01

    Nuclear power can provide security of energy supply, stable energy costs, and can contribute to greenhouse gas reduction. To fully realize these benefits, a continued and strong focus must be maintained on means for assuring the economic competitiveness of nuclear power relative to alternatives. Over the past several years, considerable improvements have been achieved in nuclear plant performance. Worldwide, the average energy availability factor has increased from 66 per cent in 1980 to 81 per cent in 1999, with some utilities achieving significantly higher values. This is being achieved through integrated programmes including personnel training and quality assurance, improvements in plant system and component design and plant operation, by various means to reduce outage duration for maintenance and refuelling and other scheduled shutdowns, and by reducing the number of forced outages. Application of technical means for achieving high performance of nuclear power plants is an important element for assuring their economic competitiveness. For the current plants, proper management includes development and application of better technologies for inspection, maintenance and repair. For future plants, the opportunity exists during the design phase to incorporate design features and technologies for achieving high performance. This IAEA Technical Committee meeting (TCM) provided a forum for information exchange on design features and technologies incorporated into LWR plants commissioned within the last 15-20 years, and into evolutionary LWR designs still under development, for achieving performance improvements with due regard to stringent safety requirements and objectives. It also addressed on-going technology development expected to achieve further improvements and/or significant cost reductions. The TCM was attended by 32 participants from 14 Member States: Argentina, Bulgaria, Czech Republic, Finland, France, Germany, Hungary, Japan, Republic of Korea, Mexico

  13. Research reactor instrumentation and control technology. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-10-01

    The majority of research reactors operating today were put into operation 20 years ago, and some of them underwent modifications, upgrading and refurbishing since their construction to meet the requirements for higher neutron fluxes. However, a few of these ageing research reactors are still operating with their original instrumentation and control systems (I and C) which are important for reactor safety to guard against abnormal occurrences and reactor control involving startup, shutdown and power regulation. Worn and obsolete I and C systems cause operational problems as well as difficulties in obtaining replacement parts. In addition, satisfying the stringent safety conditions laid out by the nuclear regulatory bodies requires the modernization of research reactors I and C systems and integration of additional instrumentation units to the reactor. In order to clarify these issues and to provide some guidance to reactor operators on state-of-art technology and future trends for the I and C systems for research reactors, a Technical Committee Meeting on Technology and Trends for Research Reactor Instrumentation and Controls was held in Ljubljana, Slovenia, from 4 to 8 December 1995. This publication summarizes the discussions and recommendations resulting from that meeting. This is expected to benefit the research reactor operators planning I and C improvements. Refs, figs, tabs

  14. Studies on fuels with low fission gas release. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-10-01

    For more than a decade, the IAEA has organized various specialists meetings to discuss advances in nuclear fuel technology for non-water cooled reactors. In order to review progress in research and development of fuels with low fission gas release for light water reactors, fast reactors and research reactors, an IAEA Technical Committee meeting was organized in October 1996. At the invitation of the Government of the Russian Federation, the meeting was held in Moscow. Experts from seven Member States and one international organization participated. The objective of the meeting was to exchange topical information on such fuels, to evaluate their advantages and drawbacks, and to explore their commercial utilization. The present volume contains the full text of the sixteen papers presented at the meeting. The information compiled in these proceedings should be useful for engineers, scientists and managers from nuclear fuel development organizations, fuel fabrication plants, utilities and regulatory bodies who are involved in the analysis of fuel behaviour under normal and accident conditions. Refs, figs, tabs

  15. Poolside inspection, repair and reconstitution of LWR fuel elements. Proceedings of a Technical Committee meeting

    International Nuclear Information System (INIS)

    1998-11-01

    The Technical Committee Meeting on Poolside Inspection, repair and reconstruction of LWR Fuel Elements was organize by IAEA upon the recommendations of the International Working Group on Fuel performance Technology and held in Switzerland in October 1997. The purpose of the Meeting was to review the state of art in the area of poolside inspection, repair and reconstruction of light water fuel elements and to evaluate the progress achieved in this area since previous IAEA Meetings on the same topic in 1981 and 1984. The Meeting provided a forum on exchange of information between utilities, fuel designers and other authorities and specialists on a topic of current interest and real concern to industries in many Member States. The respective technologies are widely used or planned to be used in order to identify elementary major causes of fuel failure and to improve fuel utilization by repair and subsequent reuse of fuel elements. The Proceedings includes papers presented at the Meeting each described by a separate abstract

  16. Advanced fuels with reduced actinide generation. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1996-11-01

    Nuclear energy can play an important future role in supplying the world population with energy. However, this form of energy will be successful only under certain conditions: it must meet very strict safety requirements, it must be economically competitive, and it must be acceptable to the public. Nuclear power produces radioactive wastes and in several countries the public raises concern about safety. Much development work on advanced nuclear power systems is going on in several countries, with participation of both governmental and private industries to meet these conditions. In the framework of this IAEA activity the Technical Committee Meeting on Advanced Fuels with Reduced Actinide Generation was organized. The aim of the meeting was to highlight current research activities and to identify new research areas and fields of possible co-operation. The scope of the meeting included advanced fuels for all types of nuclear reactors: light water reactors, heavy water reactors, high temperature reactors, fast reactors, molten salt reactors and for accelerator driven systems. Other topics covered a wide range of investigations made, or to be made in the Member States. Refs, figs, tabs

  17. Energy Materials Coordinating Committee (EMaCC), fiscal year 1985. Annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1986-05-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meeting/workshops on selected topics involving both DOE and major contractors. Four topical subcommittees on Structural Ceramics, Batteries and Fuel Cells, Radioactive Waste Containment, and Steel are established and are continuing their own program. The FY 1985 and FY 1986 meeting program is given. The EMaCC aids in obtaining materials-related inputs for both intra- and inter-agency compilations. Brief summaries of the materials research programs associated with each office and division are presented, including tables listing individual projects and the FY 1985 budgets for each. More details on the individual projects within the divisions and the specific tasks or subcontracts within the various projects are given in the paragraph descriptions.

  18. Energy Materials Coordinating Committee (EMaCC), fiscal year 1985. Annual technical report

    International Nuclear Information System (INIS)

    1986-05-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meeting/workshops on selected topics involving both DOE and major contractors. Four topical subcommittees on Structural Ceramics, Batteries and Fuel Cells, Radioactive Waste Containment, and Steel are established and are continuing their own program. The FY 1985 and FY 1986 meeting program is given. The EMaCC aids in obtaining materials-related inputs for both intra- and inter-agency compilations. Brief summaries of the materials research programs associated with each office and division are presented, including tables listing individual projects and the FY 1985 budgets for each. More details on the individual projects within the divisions and the specific tasks or subcontracts within the various projects are given in the paragraph descriptions

  19. Regulatory surveillance of safety related maintenance at nuclear power plants. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-08-01

    The operational safety and reliability of a nuclear power plant as well as its availability for electricity generation depend on, among other things, its maintenance programme. Regulatory bodies therefore have considerable interest in maintenance activities. There are several approaches to maintenance, i.e. reliability centered maintenance or risk focused maintenance, aimed at optimizing maintenance by focusing on important components or systems. These approaches may result in significant changes to maintenance activities and therefore have to be considered for regulatory acceptance. In order to review and discuss the status of maintenance regulation in participating countries, the IAEA convened a Technical Committee Meeting on Regulatory Oversight of Maintenance Activities at Nuclear Power Plants in Vienna from 9 to 13 October 1995. The meeting was attended by 16 experts from 11 countries. In addition to the consideration of papers that were presented and which are reproduced here, extensive group and panel discussions took place during the meeting. These covered three main topics: general features and basic characteristics of maintenance regulation, regulatory acceptance of maintenance optimization and use of PSA for maintenance optimization. The discussion are summarized in Section 2. Section 3 discusses the following three additional topics: regulatory involvement in the maintenance programme, modifications to the maintenance programme and personnel related aspects of maintenance. The conclusions are presented in Section 4. Figs, tabs

  20. Technical support for the Ukrainian State Committee for Nuclear Radiation Safety on specific waste issues

    International Nuclear Information System (INIS)

    Little, C.A.

    1995-01-01

    The government of Ukraine, a now-independent former member of the Soviet Union, has asked the United States to assist its State Committee for Nuclear and Radiation Safety (SCNRS) in improving its regulatory control in technical fields for which it has responsibility. The US Nuclear Regulatory Commission (NRC) is providing this assistance in several areas, including management of radioactive waste and spent fuel. Radioactive wastes resulting from nuclear power plant operation, maintenance, and decommissioning must be stored and ultimately disposed of appropriately. In addition, radioactive residue from radioisotopes used in various industrial and medical applications must be managed. The objective of this program is to provide the Ukrainian SCNRS with the information it needs to establish regulatory control over uranium mining and milling activities in the Zheltye Vody (Yellow Waters) area and radioactive waste disposal in the Pripyat (Chernobyl) area among others. The author of this report, head of the Environmental Technology Section, Health Sciences Research Division of Oak Ridge National Laboratory, accompanied NRC staff to Ukraine to meet with SCNRS staff and visit sites in question. The report highlights problems at the sites visited and recommends license conditions that SCNRS can require to enhance safety of handling mining and milling wastes. The author's responsibility was specifically for the visit to Zheltye Vody and the mining and milling waste sites associated with that facility. An itinerary for the Zheltye Vody portion of the trip is included as Appendix A

  1. MEETING REPORT: OMG Technical Committee Meeting in Orlando, FL, sees significant enhancement to CORBA

    Science.gov (United States)

    1998-06-01

    The Object Management Group (OMG) Platform Technology Committee (PTC) ratified its support for a new asynchronous messaging service for CORBA at OMG's recent Technical Committee Meeting in Orlando, FL. The meeting, held from 8 - 12 June, saw the PTC send the Messaging Service out for a final vote among the OMG membership. The Messaging Service, which will integrate Message Oriented Middleware (MOM) with CORBA, will give CORBA a true asynchronous messaging capability - something of great interest to users and developers. Formal adoption of the specification will most likely occur by the end of the year. The Messaging Service The Messaging Service, when adopted, will be the world's first standard for Message Oriented Middleware and will give CORBA a true asynchronous messaging capability. Asynchronous messaging allows developers to build simpler, richer client environments. With asynchronous messaging there is less need for multi-threaded clients because the Asynchronous Method Invocation is non-blocking, meaning the client thread can continue work while the application waits for a reply. David Curtis, Director of Platform Technology for OMG, said: `This messaging service is one of the more valuable additions to CORBA. It enhances CORBA's existing asynchronous messaging capabilities which is a feature of many popular message oriented middleware products. This service will allow better integration between ORBs and MOM products. This enhanced messaging capability will only make CORBA more valuable for builders of distributed object systems.' The Messaging Service is one of sixteen technologies currently being worked on by the PTC. Additionally, seventeen Revision Task Forces (RTFs) are working on keeping OMG specifications up to date. The purpose of these Revision Task Forces is to take input from the implementors of OMG specifications and clarify or make necessary changes based on the implementor's input. The RTFs also ensure that the specifications remain up to date

  2. Confessions of an Ethics Committee Chair

    Science.gov (United States)

    Halse, Christine

    2011-01-01

    This essay examines the possibilities of being/becoming an ethical researcher in the academy. It tackles this task through the lens of an ethics application by Mary [pseudonym], a PhD student in sociology whose research thesis was investigating the reasons why married men with children use prostitutes. Two analyses are offered of Mary's story. The…

  3. Chair-ish.

    Science.gov (United States)

    Greenman, Geri

    2000-01-01

    Presents an art assignment that helps students progress from color theory and the color wheel to understanding watercolor techniques. Explains that students apply their knowledge of watercolor techniques by using three of ten techniques to create different views of a chair in the Cubist style. (CMK)

  4. Gas-cooled reactor technology safety and siting. Report of a technical committee meeting. Working material

    International Nuclear Information System (INIS)

    1990-01-01

    At the invitation of the Government of the Union of Soviet Socialist Republics, the Eleventh International Conference on the HTGR and the IAEA Technical Committee Meeting on Gas-Cooled Reactor Technology, Safety and Siting were held in Dimitrovgrad, USSR, on June 21-23, 1989. The Technical Committee Meeting provided the Soviet delegates with an opportunity to display the breadth of their program on HTGRs to an international audience. Nearly one-half of the papers were presented by Soviet participants. Among the highlights of the meeting were the following: the diverse nature and large magnitude of the Soviet research and development program on high temperature gas-cooled reactors; the Government approval of the budget for the construction of the 30 MWt High Temperature Test Reactor (HTTR) in Japan (The schedule contemplates a start of construction in spring 1990 on a site at the Oarai Research Establishment and about a five year construction period.); disappointment in the announced plans to shutdown both the Fort St. Vrain (FSV) plant in the United States (US) and the Thorium High Temperature Reactor (THTR-300) in Germany (These two reactors presently represent the only operating HTGRs in the world since the AVR plant in Juelich, Germany, was also shutdown at the end of 1988.); the continuing negotiations between Germany and the USSR on the terms of the co-operation between the two countries for the construction of a HTR Module supplemented by joint research and development activities aimed at increasing coolant outlet temperatures from 750 deg. C to 950 deg. C; the continued enthusiasm displayed by both the US and German representatives for the potential of the small modular designs under development in both countries and the ability for these designs to meet the stringent requirements demanded for the future expansion of nuclear power; the combining of the HTGR technology interest of ABB-Atom and Siemens in Germany into a joint enterprise, HTR GmbH, in May 1989

  5. Safety related design and economic aspects of HTGRs. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-04-01

    The purpose of the Technical Committee Meeting (TCM) was to provide the opportunity to review the status of design and development activities associated with safety related and economic aspects of HTGRs, and to identify pathways which may provide the opportunity for international cooperation in addressing these issues. The HTGR, as a nuclear heat source for the safe, economic and efficient production of electricity and high temperature industrial processes has, within the past few years, become a significantly increasing influence in the future of nuclear power. Nuclear test facilities with the capability of achieving core outlet temperatures to 950 deg. C are presently under construction in China and Japan. These plants will be utilized to support HTGR research and development activities, including electricity generation via the gas turbine and validation of high temperature process heat applications. Also, major development programmes focusing on the generation of electricity through the direct cycle gas turbine are in progress by ESKOM, the state electric utility of South Africa, and by a consortium of organizations from the Russian Federation, USA, France and Japan. Other national programmes focusing on research and development of the HTGR are underway including the Netherlands, where an evaluation is being completed on a heat and power co-generation plant utilizing a small direct cycle HTR; in Germany, where the primary focus is centered on basic issues of reactor safety and innovative reactor technology; in Indonesia with the evaluation of process heat applications such as coal liquefaction, hydrogen production and high temperature reforming of methane; and in the USA with the recent re-introduction of national support for the HTGR specifically directed to the burning of weapons plutonium. The status information presented in several of the papers is as of the time of drafting. Thus other later material should be referenced for more current status information

  6. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2005

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2006-09-29

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed. The FY 2004 budget summary for DOE Materials Activities is presented on page 8. The distribution of these funds between DOE laboratories, private industry, academia and other organizations is presented in tabular form on page 10. Following the budget summary is a set of detailed program descriptions for the FY 2004 DOE Materials activities. These descriptions are presented according to the organizational structure of the Department. A mission statement, a budget summary listing the project titles and FY 2004 funding, and detailed project summaries are presented for each Assistant Secretary office, the Office of Science, and the National Nuclear Security Administration. The project summaries also provide DOE, laboratory, academic and industrial contacts for each project, as appropriate.

  7. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2004

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2005-08-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed. The FY 2004 budget summary for DOE Materials Activities is presented on page 8. The distribution of these funds between DOE laboratories, private industry, academia and other organizations is presented in tabular form on page 10. Following the budget summary is a set of detailed program descriptions for the FY 2004 DOE Materials activities. These descriptions are presented according to the organizational structure of the Department. A mission statement, a budget summary listing the project titles and FY 2004 funding, and detailed project summaries are presented for each Assistant Secretary office, the Office of Science, and the National Nuclear Security Administration. The project summaries also provide DOE, laboratory, academic and industrial contacts for each project, as appropriate.

  8. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2002

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2003-08-08

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed. The EMaCC Charter and the memorandum approving it are presented in the Appendix of this report. The FY 2002 budget summary for DOE Materials Activities is presented on page 8. The distribution of these funds between DOE laboratories, private industry, academia and other organizations is presented in tabular form on page 10. Following the budget summary is a set of detailed program descriptions for the FY 2002 DOE Materials activities. These descriptions are presented according to the organizational structure of the Department. A mission statement, a budget summary listing the project titles and FY 2002 funding, and detailed project summaries are presented for each Assistant Secretary office, the Office of Science, and the National Nuclear Security Administration. The project summaries also provide DOE, laboratory, academic and industrial contacts for each project, as appropriate.

  9. Technical Advisory Committee on the nuclear fuel waste management program : thirteenth annual report

    International Nuclear Information System (INIS)

    Shemilt, L.W.

    1993-03-01

    Since the last reporting period by the Technical Advisory Committee (TAC) the emphasis of the work in the Canadian Nuclear Fuel Waste Management Program (CNFWMP) has been on the writing of the Environmental Impact Statement (EIS) and the associated set of nine primary reference documents as well as supporting documents. These are in preparation for submission to the Environmental Assessment Review Panel who will lead the national evaluation of the disposal concept under the auspices of the Federal Environmental Assessment Review Office (FEARO). The disposal concept developed over the last fourteen years by Atomic Energy of Canada Limited (AECL) and anticipated to be presented by means of the EIS in 1994, is based on a multiple system of natural and man-made barriers wherein nuclear waste is first enclosed in corrosion-resistant containers, designed to last at least 500 years, and then placed in a vault excavated 500 - 1000 m deep in granitic rocks of the Canadian Shield. After container emplacement either in or on the floor of the vault, and with a surrounding buffer material of a bentonite clay/sand mixture, the vault will be backfilled and sealed with crushed rock, buffer and sand, as will be the shafts and exploratory boreholes. The case study being presented by AECL to demonstrate the safety of this concept and the technology to implement it, relies on computer simulations of a hypothetical disposal site with geological characteristics similar to those at the Underground Research Laboratory (URL) in the Whiteshell Research Area (WRA) located in Manitoba. The preliminary simulation results suggest that safe containment can be achieved provided that the waste is surrounded by a sparsely-fractured zone of rock wherein movement of contaminants carried by groundwater is modelled as a diffusive as opposed to a advective process. The principal focus of work during the past year within the environmental and safety assessment has been to complete the Post

  10. Executive committee

    Science.gov (United States)

    Xiao, Guoqing; Cai, Xiaohong; Ding, Dajun; Ma, Xinwen; Zhao, Yongtao

    2014-04-01

    ChairVice Chair Toshiyuki AzumaRoberto Rivarola Atomic, Molecular & Optical Physics LabUniversidad Nacional de Rosario and Advanced Science InstituteInstituto de Fisica Rosario RIKEN, JapanRosario, Argentina SecretaryMembers Dominique VernhetJoachim Burgdörfer, Austria Institut des NanoSciences de Paris Birgit Lohmann, Australia Université Pierre et Marie Curie Hossein Sadeghpour, USA Paris, FranceThomas Stöhlker, Germany Past ChairJim McCann, UK Barry DunningGuoqing Xiao, China Physics & AstronomyXiaohong Cai, China Rice University, HoustonXinwen Ma, China Texas, USAYongtao Zhao, China TreasurerFernando Martin, Spain Henrik CederquistLuis Mendez, Spain Alba Nova University CenterAnatoli Kheifets, Australia Stockholm University Stockholm, Sweden Details of the general committee are available in the PDF

  11. Control assembly materials for water reactors: Experience, performance and perspectives. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2000-02-01

    The safe, reliable and economic operation of water cooled nuclear power reactors depends to a large extent upon the reliable operation of control assemblies for the regulation and shutdown of the reactors. These consist of neutron absorbing materials clad in stainless steel or zirconium based alloys, guide tubes and guide cards, and other structural components. Current designs have worked extremely well in normal conditions, but less than ideal behaviour limits the lifetimes of control materials, imposing an economic penalty which acts as a strong incentive to produce improved materials and designs that are more reliable. Neutron absorbing materials currently in use include the ceramic boron carbide, the high melting point metal hafnium and the low melting point complex alloy Ag-In-Cd. Other promising neutron absorbing materials, such as dysprosium titanate, are being evaluated in the Russian Federation. These control materials exhibit widely differing mechanical, physical and chemical properties, which must be understood in order to be able to predict the behaviour of control rod assemblies. Identification of existing failure mechanisms, end of life criteria and the implications of the gradual introduction of extended burnup, mixed oxide (MOX) fuels and more complex fuel cycles constitutes the first step in a search for improved materials and designs. In the early part of this decade, it was recognized by the International Working Group on Fuel Performance and Technology (IWGFPT) that international conferences, symposia and published reviews on the materials science aspects of control assemblies were few and far between. Consequently, the IWGFPT recommended that the IAEA should rectify this situation with a series of Technical Committee meetings (TCMs) devoted entirely to the materials aspects of reactor control assemblies. The first was held in 1993 and in the intervening five years considerable progress has been made. In bringing together experts in the

  12. Report of the first meeting of the Project Advisory Committee (Technical) 21-24 March 1983, at NEMROCK, Cairo

    International Nuclear Information System (INIS)

    Taylor, C.B.G.

    1983-05-01

    The Project Advisory Committee (Technical) (PACT) met on 21-24 March 1983, at NEMROCK, Cairo, Egypt, to discuss the joint IAEA/WHO project on Intracavitary Radiation Therapy for Cancer of the Uterus (Egypt/6/004). At this four day meeting the committee (1) identified a well-defined administrative framework in which earlier diagnosis of uterine cancer may be organized, on a limited but firm basis. (2) Agreed on the clinical and dosimetric principles to be followed in implementing the project. (3) Decided on the types and quantities of equipment which it will need in its first two years. (4) Developed the outline of the syllabus for the first training course, and fixed its date (three weeks from 83-10-29). (5) Reviewed the costs which will be incurred in carrying through the project and found them to be consistent with the funds available

  13. Storage of radioactive wastes in geological formations. Technical criteria for site selection. Report by the work-group chaired by Professor Goguel

    International Nuclear Information System (INIS)

    Goguel, Jean; Candes, Pierre; Izabel, Cecile; Autran, Albert; Barthoux, Alain; Baudin, Guy; Devillers, Christian; Habib, Pierre; Lafuma, Jacques; Lefevre, Jean; Peaudecerf, Pierre; Pradel, Jacques; Salle, Claude; Treuil, Michel; Lebrun, Patrick; Tissier, Marie-Solange

    1985-06-01

    This document is the result of a prospective mission on the long term storage of radioactive wastes containing long-period emitters (wastes of B and C categories), and notably on a definitive storage in deep continental geological formations. After a presentation of hypotheses (brief description of the storage concept, main safety principles, objectives in terms of radiological safety, safety options, time-related considerations), the authors addressed the following issues: safety before closing during the exploitation period, and safety after closure (after backfilling and sealing of all underground cavities). For the first issue, they discuss the impacts of works on safety and thermal effects during exploitation. For the second issue, they discuss the site natural hydro-geological context, the disturbances brought by the storage (access of water to the storage, and return of water into the biosphere), and the influence of external factors (geological phenomena, human intrusion). Then, the authors make recommendations regarding reconnaissance programs and studies for the selection and qualification of a site. They finally propose technical criteria and main recommendations for site selection. Appendices propose a list of hearings, a presentation of the storage concept, a report on the impact of works, a report on the presence of mineralisation in granite massifs, reports on radiological consequences of intrusions in salt formations and in granite massif containing storage of radioactive wastes or vitrified wastes, a report on the characterization of unsteady parts of the French continental construction, a presentation of the evolution of climate and icings, and a study of seismic movements in the case of deep storages

  14. 75 FR 62509 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members

    Science.gov (United States)

    2010-10-12

    ... send a copy of your resume to Ms. Yvette Springer at [email protected] . Deadline: This Notice of... INFORMATION CONTACT: Ms. Yvette Springer on (202) 482-2813. Dated: October 6, 2010. Yvette Springer, Committee...

  15. The Chair and the New President: Getting the First Months Right

    Science.gov (United States)

    Riggs, Janet Morgan; Duelks, Robert

    2012-01-01

    Gettysburg College President Janet Morgan Riggs and Board Chair Robert N. Duelks are both members of the Gettysburg class of 1977, but did not know each other as students. As a member of the college's board of trustees, Duelks chaired the presidential search committee that selected Riggs as Gettysburg's 14th president in 2009. Then, one year after…

  16. 76 FR 20651 - Environmental Management Site-Specific Advisory Board Chairs

    Science.gov (United States)

    2011-04-13

    ... Environmental Management Site-Specific Advisory Board Chairs AGENCY: Department of Energy. ACTION: Notice of... Environmental Management Site-Specific Advisory Board Chairs (76 FR 17118). This notice announces the...-7711. Issued at Washington, DC, on April 8, 2011. LaTanya R. Butler, Acting Deputy Committee Management...

  17. IAEA International Database on Irradiated Nuclear Graphite Properties. Summary report of consultants' meeting. 12. meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Chung, H.K.; Wickham, A.J.

    2010-02-01

    The 12th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties was held on 12-13 November 2009 at the IAEA Headquarters, Vienna, Austria. All discussions, recommendations and actions of this Consultants' Meeting are recorded in this report. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database, and make recommendations for action over the next year. This report contains the status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  18. Use of probabilistic safety assessment in the regulatory process. Report of the technical committee meeting. Working material

    International Nuclear Information System (INIS)

    1994-01-01

    A Technical Committee Meeting (TCM) was organized between 5-8 December 1994 to discuss and review the international situation in connection with the use made, whether formally or informally, by regulatory bodies of probabilistic safety assessment (PSA) in the course of their work, and the related question of the use and value of adopting probabilistic safety criteria (PSC) as an aid to judging the results of PSAs. The document includes the output from the four working groups, as well as 11 papers from the 12 papers presented to the TCM. A separate abstract was prepared for each paper. Refs, figs, tabs

  19. Technologies for gas cooled reactor decommissioning, fuel storage and waste disposal. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1998-09-01

    Gas cooled reactors (GCRs) and other graphite moderated reactors have been important part of the world's nuclear programme for the past four decades. The wide diversity in status of this very wide spectrum of plants from initial design to decommissioning was a major consideration of the International Working group on Gas Cooled Reactors which recommended IAEA to convene a Technical Committee Meeting dealing with GCR decommissioning, including spent fuel storage and radiological waste disposal. This Proceedings includes papers 25 papers presented at the Meeting in three sessions entitled: Status of Plant Decommissioning Programmes; Fuels Storage Status and Programmes; waste Disposal and decontamination Practices. Each paper is described here by a separate abstract

  20. Committee for International Conference on Mechanical Engineering Research (ICMER 2011)

    Science.gov (United States)

    Yusoff, Ahmad Razlan Bin

    2012-09-01

    Scientific Advisory Committee: 1) Prof. Dr. Ahmad Kamal Ariffin (UKM) 2) Prof. Dr. Hj. Rosli Abu Bakar (UMP) 3) Prof. Dr. Hanafi Ismail (USM) 4) Prof. Ir. Dr. Mohd Jailani Mohd Nor (MoHE) 5) Prof. Dr. Zahari Taha (UMP) 6) Prof. Dr. Masjuki Haji Hassan 7) Prof. Ir. Dr. Ramesh Singh (UNITEN) 8) Prof. Dr. Razali Ayob (UTEM) 9) Prof. Dr. Wan Khairuddin (UTM) 10) Prof. Dr. Sulaiman Hj. Hasan (UTHM) 11) Prof. Dr. Zuraidah Mohd. Zain (UniMAP) 12) Prof. Dr. Horizon Gitano (USM) 13) Prof. Dr. K.V Sharma (UMP) 14) Prof. Dr. Shahrani Anuar (UMP) 15) Assoc. Prof. Dr. Abd Rashid Abd. Aziz (UTP) 16) Assoc. Prof. Dr. Aidy Ali (UPM) 17) Assoc. Prof. Dr. Saidur Rahman (UM) 18) Assoc. Prof. Dr. Md Abdul Maleque (UIA) Organizing Committee Chairman: Prof. Dr. Hj. Rosli Abu Bakar Co-Chair: Prof. Dr. Zahari Taha Co-Chair: Prof. Ir. Dr. Jailani Salihon Secretary: Dr. Rizalman Mamat Committee on Keynote Speaker 1) Kumaran Kadirgama (Chair) 2) Prof. Dr. K.V. Sharma 3) Haji Amirruddin Abdul Kadir 4) Miminorazeansuhaila Loman 5) Mohd Akramin Mohd Romlay Technical Committee (Peer Review & Proceedings) 1) Dr. Abdul Adam Abdullah (Chair) 2) Dr. Ahmad Razlan Yusoff 3) Mohd Yusof Taib 4) Dr. Md. Mustafizur Rahman 5) Dr. Hjh. Yusnita Rahayu 6) Dr. Gigih Priyandoko 7) Dr. Agung Sudrajad 8) Muhammad Hatifi Mansor 9) Mohd Fadzil Abdul Rahim Technical Committee (Panels & Session Chairs) 1) Dr. Mahadzir Ishak (Chair) 2) Prof. Dr. Shahrani Anuar 3) Dr. Maisara Mohyeldin Gasim Mohamed 4) Muhammad Ammar Nik Mu'tasim 5) Ahmad Basirul Subha bin Alias Technical Committee (Journal Publication) 1) Dr. Ahmad Razlan bin Yusoff (Chair) 2) Mohd Yusof Taib 3) Dr. Mahadzir Ishak 4) Dr. Abdul Adam Abdullah 5) Hj. Amirruddin Abdul Kadir 6) Hadi Abdul Salaam Bureau of Publicity & Website 1) Dr. Muhamad Arifpin Mansor (Chair) 2) Amir Abdul Razak 3) Idris Mat Sahat 4) Prof. Dr. Hj. Rosli Abu Bakar 5) Muhamad Zuhairi Sulaiman 6) Dr. Sugeng Ariyono 7) Asnul Hadi Ahmad 8) Mohd Tarmizy Che Kar 9) Mohd Padzly Radzi Bureau of

  1. Technical committee meeting on material-coolant interactions and material movement and relocation in liquid metal fast reactors

    International Nuclear Information System (INIS)

    1994-01-01

    The Technical Committee Meeting on Material-Coolant Interactions and Material Movement and Relocation in Liquid Metal Fast Reactors was sponsored by the International Working Group on Fast Reactors (IWGFR), International Atomic Energy Agency (IAEA) and hosted by PNC, on behalf of the Japanese government. A broad range of technical subjects was discussed in the TCM, covering entire aspects of material motion and interactions relevant to the safety of LMFRs. Recent achievement and current status in research and development in this area were presented including European out-of-pile test of molten material movement and relocation; molten material-sodium interaction; molten fuel-coolant interaction; core disruptive accidents; sodium boiling; post accident material relocation, heat removal and relevant experiments already performed or planned

  2. In situ leach uranium mining. Proceedings of a technical committee meeting. Working material

    International Nuclear Information System (INIS)

    2002-03-01

    mutual interest between specialists who developed and employ the technology in the two areas. The Technical Committee Meeting on In Situ Leach Uranium Mining was held in Almaty, Kazakhstan in the Hall of Science of the National Academy of Science from 9-12 September 1996. It was attended by 61 participants from 15 countries and one non-governmental international organization (Uranium Institute). Organizational support for the meeting was provided on behalf of the Government of the Republic of Kazakhstan by the National Joint Stock Company of Atomic Energy and Industry 'KATEP', the state enterprise responsible for uranium production in the Republic of Kazakhstan. This meeting provided the first ever opportunity for specialists from throughout the world to meet in central Asia and discuss ISL technology with emphasis on its development and use in the region. The site visit to the Number 6 Mining Company in south central Kazakhstan provided an opportunity for participants to observe and discuss an operating ISL facility

  3. 29 October 2013 - Former Director-General of IAEA H. Blix on the occasion of the Thorium Energy Conference at CERN with Chair of the ThEC13 Organization Committee E. Lillestol and Author of the book “Atome Vert” (Green Atom) J.-C. de Mestral; in the LHC tunnel at Point 1 with Technology Department, Machine Protection & Electrical Integrity Group, Performance Evaluation Section Member A. Verweij.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    29 October 2013 - Former Director-General of IAEA H. Blix on the occasion of the Thorium Energy Conference at CERN with Chair of the ThEC13 Organization Committee E. Lillestol and Author of the book “Atome Vert” (Green Atom) J.-C. de Mestral; in the LHC tunnel at Point 1 with Technology Department, Machine Protection & Electrical Integrity Group, Performance Evaluation Section Member A. Verweij.

  4. Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

    Science.gov (United States)

    Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

    2000-10-01

    In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

  5. Application and development of probabilistic safety assessment for nuclear power plant operations. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    1996-04-01

    The Technical Committee Meeting on Procedures for Use of PSA for Optimizing Operational Limits and Conditions for Nuclear Power Plants was held in Barcelona from 20 to 23 September 1993 to serve as a forum for discussion of the development of methods and approaches for PSA applications. The meeting was co-sponsored by the IAEA and the Asco and Vandellos nuclear power plants in Spain and was attended by more than 85 participants from 23 countries. The 35 papers and presentations reflected the extent of activities in this area worldwide. Most of the papers discuss PSA application programmes and/or specific methods and approaches used. This TECDOC, which was prepared by the participants of the Technical Committee meeting, summarizes the insights gained from the papers and plenary discussions. It also presents the conclusions of the work of three working groups which discussed the advantages and limitations of specific aspects of PSA. It provides an up-to-date description of computerized tools for risk monitoring in used or under development in Member States. It is hoped that this report will be a useful source of information on PSA applications. Refs, figs, tabs

  6. Design measures for prevention and mitigation of severe accidents at advanced water cooled reactors. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1998-06-01

    Over 8500 reactor-years of operating experience have been accumulated with the current nuclear energy systems. New generations of nuclear power plants are being developed, building upon this background of experience. During the last decade, requirements for equipment specifically intended to minimize releases of radioactive material to the environment in the event of a core melt accident have been introduced, and designs for new plants include measures for preventing and mitigating a range of severe accident scenarios. The IAEA Technical Committee Meeting on Impact of Severe Accidents on Plant Design and Layout of Advanced Water Cooled Reactors was jointly organized by the Department of Nuclear Energy and the Department of Nuclear Safety to review measures which are being incorporated into advanced water cooled reactor designs for preventing and mitigating severe accidents, the status of experimental and analytical investigations of severe accident phenomena and challenges which support design decisions and accident management procedures, and to understand the impact of explicitly addressing severe accidents on the cost of nuclear power plants. This publication is intended to provide an objective source of information on this topic. It includes 14 papers presented at the Technical Committee meeting held in Vienna between 21-25 October 1996. It also includes a Summary and Findings of the Working Groups. The papers were grouped in three sections. A separate abstract was prepared for each paper

  7. Samuel P. Massie Chair of Excellence Program

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, James H. [Howard Univ., Washington, DC (United States)

    2014-12-01

    Abstract In 1994 the Department of Energy established the DOE Chair of Excellence Professorship in Environmental Disciplines Program. In 2004, the Massie Chair of Excellence Professor at Howard University transitioned from Dr. Edward Martin to Dr. James H. Johnson, Jr. At the time of his appointment Dr. Johnson served as professor of civil engineering and Dean of the College of Engineering, Architecture and Computer Sciences. Program activities under Dr. Johnson were in the following areas: • Increase the institution’s capacity to conduct scientific research and technical investigations at the cutting-edge. • Promote interactions, collaborations and partnerships between the private sector, Federal agencies, majority research institutes and other HBCUs. • Assist other HBCUs in reaching parity in engineering and related fields. • Mentor young investigators and be a role model for students.

  8. Minutes of Technical Division Steering Committee meeting, November 21, 1955 -- Savannah River Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Evans, L.C.

    1955-11-21

    The topics discussed at this meeting included: the approval for six technical studies, safety concerns, fuel elements for tritium production, and the Mark III fuel assembly. Appendices attached to this report describe the financial status [unreadable], the theoretical physics program, experimental physics program, pile engineering program, and the Technical Division study status.

  9. 76 FR 28759 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2011-05-18

    ...), Public Law 109-58; 119 Stat. 849. The Federal Advisory Committee Act, Public Law 92-463, 86 Stat. 770... Rochester Airport Hotel, 1890 Ridge Road West, Rochester, New York. FOR FURTHER INFORMATION CONTACT: Send... procedures, members of the public are welcome to observe the business of the meeting of HTAC and to make oral...

  10. 78 FR 18578 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)

    Science.gov (United States)

    2013-03-27

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Hydrogen and Fuel Cell... Energy. ACTION: Notice of Open Meeting. SUMMARY: This notice announces an open meeting of the Hydrogen... Avenue, Washington, DC 20585. SUPPLEMENTARY INFORMATION: Purpose of the Committee: The Hydrogen and Fuel...

  11. 78 FR 5774 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members

    Science.gov (United States)

    2013-01-28

    ... send a copy of your resume to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov . Deadline: This... FURTHER INFORMATION CONTACT: Ms. Yvette Springer on (202) 482-2813. Dated: January 22, 2013. Yvette Springer, Committee Liaison Officer. BILLING CODE 3510-JT-P ...

  12. 76 FR 72160 - Regulations and Procedures Technical Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2011-11-22

    ..., first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer... the meeting to Ms. Springer via email. For more information, call Yvette Springer at (202) 482-2813. Dated: November 16, 2011 Yvette Springer, Committee Liaison Officer. BILLING CODE 3510-JT-P ...

  13. 76 FR 52312 - Transportation and Related Equipment; Technical Advisory Committee; Notice of Partially Closed...

    Science.gov (United States)

    2011-08-22

    ... Ms. Yvette Springer at Yvette.Springer@bis.doc.gov no later than September 7, 2011. A limited number... forward the public presentation materials prior to the meeting to Ms. Springer via e-mail. The Assistant... Yvette Springer at (202) 482-2813. Dated: August 15, 2011. Yvette Springer, Committee Liaison Officer...

  14. 77 FR 25960 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-05-02

    ... Ms. Yvette Springer at Yvette.Springer@bis.doc.gov , no later than May 10, 2012. A limited number of... meeting to Ms. Springer via email. The Assistant Secretary for Administration, with the concurrence of the... information, call Yvette Springer at (202) 482-2813. Dated: April 27, 2012. Yvette Springer, Committee Liaison...

  15. 76 FR 64895 - Transportation and Related Equipment Technical Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2011-10-19

    ... join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov no later... suggests that presenters forward the public presentation materials to Yvette Springer. For more information contact Ms. Springer on (202) 482-2813. Dated: October 13, 2011. Yvette Springer, Committee Liaison...

  16. 76 FR 68128 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-11-03

    .... Yvette Springer at Yvette.Springer@bis.doc.gov , no later than November 10, 2011. A limited number of... meeting to Ms. Springer via email. The Assistant Secretary for Administration, with the concurrence of the... information, call Yvette Springer at (202) 482-2813. Dated: October 31, 2011. Yvette Springer, Committee...

  17. 77 FR 8807 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-02-15

    ... Springer at Yvette.Springer@bis.doc.gov , no later than March 13, 2012. A limited number of seats will be... materials prior to the meeting to Ms. Springer via email. The Assistant Secretary for Administration, with... information, call Yvette Springer at (202) 482-2813. Dated: February 9, 2012. Yvette Springer, Committee...

  18. 78 FR 14074 - Regulations and Procedures Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-03-04

    ... basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov no... to Ms. Springer via email. The Assistant Secretary for Administration, with the concurrence of the... Yvette Springer at (202) 482-2813. Dated: February 26, 2013. Yvette Springer, Committee Liaison Officer...

  19. 77 FR 65857 - Transportation and Related Equipment Technical Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2012-10-31

    ... basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov no... meeting to Ms. Springer via email. For more information, call Yvette Springer at (202) 482 2813. Dated: October 25, 2012. Yvette Springer, Committee Liaison Officer. BILLING CODE P ...

  20. 77 FR 69790 - Regulations and Procedures Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-11-21

    ... basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov no.... Springer via email. The Assistant Secretary for Administration, with the concurrence of the delegate of the... Yvette Springer at (202) 482-2813. Dated: November 16, 2012. Yvette Springer, Committee Liaison Officer...

  1. 78 FR 42754 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-07-17

    ... Springer at Yvette.Springer@bis.doc.gov , no later than August 13, 2013. A limited number of seats will be... materials prior to the meeting to Ms. Springer via email. The Assistant Secretary for Administration, with... information, call Yvette Springer at (202) 482-2813. Dated: July 11, 2013. Yvette Springer, Committee Liaison...

  2. 77 FR 65857 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-10-31

    ..., first serve basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer... Committee members, the materials should be forwarded prior to the meeting to Ms. Springer via email. The... meeting will be open to the public. For more information, call Yvette Springer at (202) 482-2813. Dated...

  3. 78 FR 63161 - Transportation and Related Equipment Technical Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2013-10-23

    ... basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov no... meeting to Ms. Springer via email. For more information, call Yvette Springer at (202) 482-2813. Dated: October 18, 2013. Yvette Springer, Committee Liaison Officer. BILLING CODE P ...

  4. 76 FR 31301 - Regulations and Procedures Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-05-31

    ..., submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.gov no later than June 7, 2011. A limited... forward the public presentation materials prior to the meeting to Ms. Springer via e-mail. The Assistant... information, call Yvette Springer at (202) 482-2813. Dated: May 23, 2011. Yvette Springer, Committee Liaison...

  5. 77 FR 2271 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members

    Science.gov (United States)

    2012-01-17

    ... send a copy of your resume to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov . Deadline: This... FURTHER INFORMATION CONTACT: Ms. Yvette Springer on (202) 482-2813. Dated: January 11, 2012. Yvette Springer, Committee Liaison Officer. BILLING CODE 3510-JT-P ...

  6. 77 FR 42483 - Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-07-19

    ... Springer at Yvette.Springer@bis.doc.gov , no later than July 31, 2012. A limited number of seats will be... materials prior to the meeting to Ms. Springer via email. The Assistant Secretary for Administration, with... information, call Yvette Springer at (202) 482-2813. Dated: July 13, 2012. Yvette Springer, Committee Liaison...

  7. 77 FR 31567 - Regulations and Procedures Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-05-29

    ... join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov no later.... Springer via email. The Assistant Secretary for Administration, with the concurrence of the delegate of the... Springer at (202) 482-2813. Dated: May 23, 2012. Yvette Springer, Committee Liaison Officer. BILLING CODE...

  8. 77 FR 50463 - Regulations and Procedures Technical Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-08-21

    ... basis. To join the conference, submit inquiries to Ms. Yvette Springer at Yvette.Springer@bis.doc.gov no.... Springer via email. The Assistant Secretary for Administration, with the concurrence of the delegate of the... Yvette Springer at (202) 482-2813. Dated: August 15, 2012. Yvette Springer, Committee Liaison Officer...

  9. 75 FR 67345 - Agricultural Policy Advisory Committee for Trade and the Agricultural Technical Advisory...

    Science.gov (United States)

    2010-11-02

    ... DEPARTMENT OF AGRICULTURE Foreign Agricultural Service Agricultural Policy Advisory Committee for... (Secretary), in coordination with the United States Trade Representative (USTR), intends to reestablish the... objectives and bargaining positions before the United States enters into a trade agreement; The operation of...

  10. 75 FR 62096 - Agricultural Technical Advisory Committees for Trade in Tobacco, Cotton, Peanuts and Planting...

    Science.gov (United States)

    2010-10-07

    ... for Trade in Tobacco, Cotton, Peanuts and Planting Seeds, and Grains, Feed and Oilseeds; Re- structure... concerning agricultural trade policy. The committees are intended to ensure that representative elements of... system to ensure that U.S. trade policy and negotiating objectives adequately reflect U.S. commercial and...

  11. Proceedings of the sixth technical committee meeting organized by the IAEA and held in Vienna, Austria, 8-11 June 1987

    International Nuclear Information System (INIS)

    1987-01-01

    The Technical Committee on Thermal Reactor Safety Research held its sixth meeting from 8-11 June 1987 at the Agency's Headquarters in Vienna. It was attended by 25 participants representing 18 countries and 2 international organizations. With respect to exchange on national research activities the committee members presented their most recent achievements in the area of nuclear safety research. A separate abstract was prepared for each of their presentations. Refs, figs and tabs

  12. Primer for the Interim Chair

    Science.gov (United States)

    Soltys, Stephen M.

    2011-01-01

    Objective: Being successful in the role of an Interim Chair requires an approach to transitional leadership that is different from that of individuals filling the Chair role permanently. This article reviews pertinent literature on the topic. Method: The author reviewed the literature, cited pertinent articles, and supplemented with personal…

  13. Safety and environmental aspects of partitioning and transmutation of actinides and fission products. Proceedings of a technical committee meeting held in Vienna, 29 November - 2 December 1993

    International Nuclear Information System (INIS)

    1995-01-01

    There is considerable interest in many countries in the partitioning and transmutation of long lived radionuclides as a potential complement to the closed fuel cycle. Recognizing this, the IAEA organized a Technical Committee Meeting on Safety and Environmental Aspects of Partitioning and Transmutation of Actinides and Fission Products, to review the current status of progress of national and international programmes and identify the most important directions of co-operation. The results of the Technical Committee meeting are presented in this document. Refs, figs and tabs

  14. Technologies for the treatment of effluents from uranium mines, mills and tailings. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2002-06-01

    Effluent treatment is an important aspect of uranium mining and milling operations that continues through decommissioning and site rehabilitation. During the life of a mine, effluent treatment is an integral part of the operation with all effluent either being recycled to the mill or processed through a water treatment plant before being released into the environment. During decommissioning and rehabilitation, effluent treatment must continue either through a water treatment plant of by using passive treatment techniques. Because of the recent closing of several uranium mines or mining districts, particularly in eastern Europe, effluent treatment is becoming an ever increasing concern. Therefore the IAEA convened a technical committee meeting (TCM) so that experts from different countries could discuss information and knowledge on effluent treatment processes and methods. The papers presented at the meeting describe techniques for treatment of effluents from uranium production operations - both past and present. This publication contains ten papers presented at the meeting; each of the papers was indexed separately

  15. Bio-aggregates based building materials state-of-the-art report of the RILEM Technical Committee 236-BBM

    CERN Document Server

    Collet, Florence

    2017-01-01

    The work of the RILEM Technical Committee (TC -236 BBM) was dedicated to the study of construction materials made from plant particles. It considered the question whether building materials containing as main raw material recyclable and easily available plant particles are renewable. This book includes a state-of-the-art report and an appendix. The state-of-the-art report relates to the description of vegetal aggregates. Then, hygrothermal properties, fire resistance, durability and finally the impact of the variability of the method of production of bio-based concrete are assessed. The appendix is a TC report which presents the experience of a working group. The goal was to define testing methods for the measurement of water absorption, bulk density, particle size distribution, and thermal conductivity of bio aggregates. The work is based on a first round robin test of the TC-BBM where the protocols in use by the different laboratories (labs) are compared. .

  16. Water channel reactor fuels and fuel channels: Design, performance, research and development. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1998-01-01

    The International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT) recommended holding a Technical Committee Meeting on Water Channel Reactor Fuel including into this category fuels and pressure tubes/fuel channels for Atucha-I and II, BWR, CANDU, FUGEN and RBMK reactors. The IWGFPT considered that even if the characteristics of Atucha, CANDUs, BWRs, FUGEN and RBMKs differ considerably, there are also common features. These features include materials aspects, as well as core, fuel assembly and fuel rod design, and some safety issues. There is also some similarity in fuel power history and operating conditions (Atucha-I and II, FUGEN and RBMK). Experts from 11 countries participated at the meeting and presented papers on technology, performance, safety and design, and materials aspects of fuels and pressure tubes/fuel channels for the above types of water channel reactors

  17. Energy Materials Coordinating Committee (EMaCC). Annual Technical Report, Fiscal Year 2000

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2001-07-31

    The Energy Materials Coordinating Committee Annual Report (attached, DOE/SC-0040) provides an annual summary of non-classified materials-related research programs supported by various elements within the Department of Energy. The EMaCC Annual Report is a useful working tool for project managers who want to know what is happening in other divisions, and it provides a guide for persons in industry and academia to the materials program within the Department. The major task of EMaCC this year was to make the Annual Report a more user-friendly document by removing redundant program information and shortening the project summaries.

  18. Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

    Science.gov (United States)

    Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

    2017-05-01

    To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

  19. Advances in heavy water reactor technology. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-11-01

    This IAEA meeting addressed both the status of national programmes and technical topics including advances in plant and system design and new plant features, development of pressure tube technologies, fuel and fuel cycle options, computer code development and verification, and safety and accident analysis

  20. Minutes of Technical Division Steering Committee meeting August 9, 1955, Savannah River Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1955-08-15

    Study approvals are listed for Studies 8506, 8509, 8518, 8519, and 8520 with man-months and program dates specified. Safety and security agreements are listed. Additional topics discussed are: financial status, experimental physics programs, pile engineering division program, and technical division study status.

  1. [White House Conference on Aging, 1981. Creating an Age Integrated Society: Implications for the Economy. Report and Executive Summary of the Technical Committee.

    Science.gov (United States)

    Beach, Morrison H.; And Others

    This Technical Committee Report presents recommendations and strategies designed to achieve continued economic improvements for the elderly. Four specific recommendations serve as the basis for this report, i.e.,: (1) the United States should expand employment opportunities for the elderly; (2) both government and the private sector should…

  2. Committees and supporting organizations

    Science.gov (United States)

    2011-09-01

    Advisory Committee:Organizing Committee: Marcello Baldo (Catania)Takaharu Otsuka (Tokyo), co-chair George Bertsch (Seattle)Michael Urban (Orsay), co-chair Jean-Paul Blaizot (Saclay)Taiichi Yamada (Yokohama) Michel Girod (Bruyères-le-Châtel)Nguyen van Giai (Orsay) Hisashi Horiuchi (Osaka)Shinichiro Fujii (Tokyo) Umberto Lombardo (Catania)Jérôme Margueron (Orsay) Gerd Röpke (Rostock)Kouichi Hagino (Sendai) Hiroyuki Sagawa (Aizu)Yoshiko Kanada-En'yo (Kyoto) Piet Van Isacker (Caen) Enrico Vigezzi (Milano) IPN logo    EFES logo    CNRS logo    ihp logo

  3. Energy Materials Coordinating Committee (EMaCC) annual technical report, fiscal year 1984 with fiscal year 1985 data

    Energy Technology Data Exchange (ETDEWEB)

    None

    1985-07-01

    The Department of Energy funded about 374 million dollars of materials science and technology activities in both fiscal years 1984 and 1985. These funds and the commensurate program management responsibilities resided in 21 DOE program offices, each of which has its own mission and responsibilities. The Energy Materials Coordinating Committee (EMaCC) provides a formal mechanism to insure coordinated planning and maximum programmatic effectiveness for the Department's 374 million dollar per year materials effort. The EMaCC reports to the Director of the Office of Energy Research who in turn has oversight responsibilities for proper coordination of the technical programs of the Department. In carrying out this responsibility, EMaCC hosts meetings, organizes working groups, and publishes an annual technical report. This report is mandated by the EMaCC Terms of Reference. Its purpose is to disseminate information on the DOE materials programs for more effective coordination. It describes the materials research programs of various offices and divisions within the Department for FY 1984, contains funding information for FYs 1984 and 1985, and summarizes EMaCC activities for FY 1985.

  4. Energy Materials Coordinating Committee (EMaCC) annual technical report, fiscal year 1984 with fiscal year 1985 data

    International Nuclear Information System (INIS)

    1985-07-01

    The Department of Energy funded about 374 million dollars of materials science and technology activities in both fiscal years 1984 and 1985. These funds and the commensurate program management responsibilities resided in 21 DOE program offices, each of which has its own mission and responsibilities. The Energy Materials Coordinating Committee (EMaCC) provides a formal mechanism to insure coordinated planning and maximum programmatic effectiveness for the Department's 374 million dollar per year materials effort. The EMaCC reports to the Director of the Office of Energy Research who in turn has oversight responsibilities for proper coordination of the technical programs of the Department. In carrying out this responsibility, EMaCC hosts meetings, organizes working groups, and publishes an annual technical report. This report is mandated by the EMaCC Terms of Reference. Its purpose is to disseminate information on the DOE materials programs for more effective coordination. It describes the materials research programs of various offices and divisions within the Department for FY 1984, contains funding information for FYs 1984 and 1985, and summarizes EMaCC activities for FY 1985

  5. Energy Materials Coordinating Committee (EMACC). Annual Technical Report, Fiscal Year 1978

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1978-08-01

    The Department of Energy Materials Coordinating Committee (EMACC) completed its first year of activity in FY 1978. A major project during the year was to conduct a survey of topical areas and prepare the report, Survey and Analysis of Selected Topics within the Department of Energy's Materials Research and Development Programs. Seven topics selected were those that had a high level of Divisional interest and supplement those reported in FY 1977 in DOE/ET-0006. The topics and the EMACC panel leaders in charge of compiling information were: 1. Joining of Materials, E.E. Hoffman and E. Dalder; 2. Elastomers R. Nelson; 3. Catalysts and Catalytic Effects R. Epple; 4. Radiation Effects K. Zwilsky; 5. Superconductivity W. Clinton; 6. Cement and Concrete L. Kukacka BNL/R. Reeber; and 7. Alternate Materials R.R. Reeber The report summarizes over 250 projects in these areas and completes the initial review started by James Swisher FY 1977 EMACC Chairman.

  6. Energy materials coordinating committee (EMACC) Fiscal Year 1980. Annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-01-01

    This report contains information on the FY 1980 Department of Energy materials research and development programs and on those programs/projects with a significant materials activity. It was compiled by the Energy Materials Coordinating Committee (EMaCC). The previous report in this series summarized the FY 1979 programs (DOE/US-0002-2). The report is separated into sections, each containing programs reporting to one of six Assistant Secretaries of the Department: Conservation and Solar Energy, Defense Programs, Environment, Fossil Energy, Nuclear Energy, and Resource Applications; and one section, Energy Research, responsible to the Director of the Office of Energy Research. For convenience in locating the generic types of materials activities, an Appendix has been added that contains a primary keyword index.

  7. Energy materials coordinating committee (EMACC) Fiscal Year 1980. Annual technical report

    International Nuclear Information System (INIS)

    1980-01-01

    This report contains information on the FY 1980 Department of Energy materials research and development programs and on those programs/projects with a significant materials activity. It was compiled by the Energy Materials Coordinating Committee (EMaCC). The previous report in this series summarized the FY 1979 programs (DOE/US-0002-2). The report is separated into sections, each containing programs reporting to one of six Assistant Secretaries of the Department: Conservation and Solar Energy, Defense Programs, Environment, Fossil Energy, Nuclear Energy, and Resource Applications; and one section, Energy Research, responsible to the Director of the Office of Energy Research. For convenience in locating the generic types of materials activities, an Appendix has been added that contains a primary keyword index

  8. Recent developments in post-irradiation examination techniques for water reactor fuel. Proceedings of a technical committee meeting held in Cadarache, France, 17-21 October 1994

    International Nuclear Information System (INIS)

    1995-09-01

    At the invitation of the Government of France, following a proposal of the International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT) the IAEA convened a Technical Committee meeting from 14 to 21 October 1994 in Cadarache to discuss recent technical advances and improvements in the field of post-irradiation examination (PIE) of fuel used in nuclear power plants. Fifty participants representing 14 countries attended the meeting and 30 papers were presented and discussed during five technical sessions. Working Groups composed of the session chairmen and authors of papers prepared summaries of each session including conclusions and recommendations for future work. Refs, figs and tabs

  9. Archives, Collections and Curatorship. The Delft Chair Collection

    NARCIS (Netherlands)

    Van Wijk, C.

    2011-01-01

    Last year, in May, the building of the Faculty of Architecture at the Delft Technical University was destroyed almost entirely by fire. Fortunately, some parts of the building escaped the flames and, after a few days, the library collection of over 40,000 titles was saved, as was the chair

  10. 21 CFR 882.4125 - Neurosurgical chair.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Neurosurgical chair. 882.4125 Section 882.4125...) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4125 Neurosurgical chair. (a) Identification. A neurosurgical chair is an operating room chair used to position and support a patient during...

  11. 21 CFR 892.1820 - Pneumoencephalographic chair.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Pneumoencephalographic chair. 892.1820 Section 892...) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1820 Pneumoencephalographic chair. (a) Identification. A pneumoencephalographic chair is a chair intended to support and position a patient during...

  12. Fuel cycle options for light water reactors and heavy water reactors. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1999-11-01

    In the second half of the 20th century nuclear power has evolved from the research and development environment to an industry that supplies 16% of the world's electricity. By the end of 1997, over 8500 reactor-years of operating experience had been accumulated. Global environmental change, and the continuing increase in global energy supply required to provide increasing populations with an improving standard of living, make the contribution from nuclear energy even more important for the next century. For nuclear power to achieve its full potential and make its needed contribution, it must be safe, economical, reliable and sustainable. All of these factors can be enhanced by judicious choice and development of advanced fuel cycle options. The Technical Committee Meeting (TCM) on Fuel Cycle Options for Light Water Reactors and Heavy Water Reactors was hosted by Atomic Energy of Canada Limited (AECL) on behalf of the Canadian Government and was jointly conducted within the frame of activities of the IAEA International Working Group on Advanced Technologies for Light Water Reactors (IWG-LWR) and the IAEA International Working Group on Advanced Technologies for Heavy Water Reactors (IWG-HWR). The TCM provided the opportunity to have in-depth discussions on important technical topics which were highlighted in the International Symposium on Nuclear Fuel Cycle and Reactor Strategies: Adjusting to New Realities, held in Vienna, 3-6 June 1997. The main results and conclusions of the TCM were presented as input for discussion at the first meeting of the IAEA newly formed International Working Group on Fuel Cycle Options

  13. 77 FR 27832 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-05-11

    ... organizations --Relations with non-governmental organizations --World Maritime Day --International Maritime... DEPARTMENT OF STATE [Public Notice: 7879] Shipping Coordinating Committee; Notice of Committee...-second Session of the International Maritime Organization (IMO) Technical Co-operation Committee (TCC 62...

  14. 78 FR 32698 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-05-31

    ... intergovernmental organizations --Relations with non-governmental organizations --World Maritime Day --International... DEPARTMENT OF STATE [Public Notice 8340] Shipping Coordinating Committee; Notice of Committee... Session of the International Maritime Organization (IMO) Technical Co-operation Committee (TCC 63) to be...

  15. Advances in fuel pellet technology for improved performance at high burnup. Proceedings of a Technical Committee meeting

    International Nuclear Information System (INIS)

    1998-08-01

    The IAEA has recently completed two co-ordinated Research Programmes (CRPs) on The Development of Computer Models for Fuel Element Behaviour in Water Reactors, and on Fuel Modelling at Extended Burnup. Through these CRPs it became evident that there was a need to obtain data on fuel behaviour at high burnup. Data related o thermal behaviour, fission gas release and pellet to clad mechanical interaction were obtained and presented at the Technical Committee Meeting on Advances in Fuel Pellet Technology for Improved Performance at High Burnup which was recommended by the International Working Group on Fuel Performance and Technology (IWGFPT). The 34 papers from 10 countries are published in this proceedings and presented by a separate abstract. The papers were grouped in 6 sessions. First two sessions covered the fabrication of both UO 2 fuel and additives and MOX fuel. Sessions 3 and 4 covered the thermal behaviour of both types of fuel. The remaining two sessions dealt with fission gas release and the mechanical aspects of pellet to clad interaction

  16. Water reactor fuel element modelling at high burnup and its experimental support. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-08-01

    The Technical Committee Meeting on Fuel Element Modelling at High Burnup and its Experimental Support was recommended by the International Working Group on Fuel Performance and Technology (IWGFPT). Its subject had been touched on in many of the IAEA's activities; however for the first time modellers and experimentalists were brought together to have an exchange of views on the research under way and to identify areas where new knowledge is necessary to improve the safety, reliability and/or economics of nuclear fuel. The timely organization of this meeting in conjunction with the second meeting of the Co-ordinated Research Programme on Fuel Modelling at Extended Burnup, in short ''FUMEX'', allowed fruitful participation of representatives of developing countries which are only rarely exposed to such a scientific event. The thirty-nine papers presented covered the status of codes and experimental facilities and the main phenomena affecting the fuel during irradiation, namely: thermal fuel performance, clad corrosion and pellet-cladding interaction (PCI) and fission gas release (FGR). Refs, figs, tabs

  17. Advanced fuel pellet materials and designs for water cooled reactors. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2004-10-01

    This meeting was the second IAEA meeting on this subject. The first was held in 1996 in Tokyo, Japan. They are all part of a cooperative effort through the Technical Working Group on Water Reactor Fuel Performance and Technology (TWGFPT) of IAEA, with a series of three further meetings organized by CEA, France and co-sponsored by the IAEA and OECD/NEA. In the seven years since the first meeting took place, the demands on fuel duties have increased, with higher burnup, longer fuel cycles and higher temperatures. This places additional demands on fuel performance to comply with safety requirements. Criteria relative to fuel components, i.e. pellets and fuel rod column, require limiting of fission gas release and pellet-cladding interaction (PCI). This means that fuel components should maintain the composite of rather contradictory properties from the beginning until the end of its in-pile operation. Fabrication and design tools are available to influence, and to some extent, to ensure desirable in-pile fuel properties. Discussion of these tools was one of the objectives of the meeting. The second objective was the analysis of fuel characteristics at high burnup and the third and last objective was the discussion of specific feature of MOX and urania gadolinia fuels. Sixty specialists in the field of fuel fabrication technology attended the meeting from 18 countries. Twenty-five papers were presented in five sessions covering all relevant topics from the practices and modelling of fuel fabrication technology to its optimization. Eight papers were presented in session 'Optimization of fuel fabrication technology' which all were devoted to fuel fabrication technology. They mostly treated methods for optimizing fuel manufacturing processes, but gave also a good overview on nuclear fabrication needs and capabilities in different countries. During Session 'UO 2 , MOX and UO 2 -Gd 2 O 3 pellets with additives', six papers were presented in this session, which dealt mainly

  18. Canada Research Chairs | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    aspx. International Research Chairs Initiative. The International Research Chairs Initiative pairs top research talent from universities in Canada with their counterparts in developing countries to address key development challenges. View more

  19. Design: More than a cool chair

    DEFF Research Database (Denmark)

    Friis, Silje Alberthe Kamille; Austin, Robert; Sullivan, Erin

    2006-01-01

    Austin, R., Friis, K., Sullivan, E. 2006. Design: More than a cool chair. Boston: Harvard Business School Publishing.......Austin, R., Friis, K., Sullivan, E. 2006. Design: More than a cool chair. Boston: Harvard Business School Publishing....

  20. Advanced Fuel Pellet Materials and Fuel Rod Design for Water Cooled Reactors. Proceedings of a Technical Committee Meeting

    International Nuclear Information System (INIS)

    2010-10-01

    The economics of current nuclear power plants have improved through increased fuel burnup and longer fuel cycles, i.e. increasing the effective time that fuel remains in the reactor core and the amount of energy it generates. Efficient consumption of fissile material in the fuel element before it is discharged from the reactor means that less fuel is required over the reactor's life cycle, which results in lower amounts of fresh fuel, lower spent fuel storage costs, and less waste for ultimate disposal. Better utilization of fissile nuclear materials, as well as more flexible power manoeuvring, place challenging operational demands on materials used in reactor components, and first of all, on fuel and cladding materials. It entails increased attention to measures ensuring desired in-pile fuel performance parameters that require adequate improvements in fuel material properties and fuel rod designs. These are the main reasons that motivated the IAEA Technical Working Group on Fuel Performance and Technology (TWG-FPT) to recommend the organization of a Technical Committee Meeting on Advanced Fuel Pellet Materials and Fuel Rod Designs for Power Reactors. The proposal was supported by the IAEA TWGs on Advanced Technologies for Light and Heavy Water-Cooled Reactors (TWG-LWR and TWG-HWR), and the meeting was held at the invitation of the Government of Switzerland at the Paul Scherrer Institute in Villigen, from 23 to 26 November 2009. This was the third IAEA meeting on these subjects (the first was held in 1996 in Tokyo, Japan, and the second in 2003 in Brussels, Belgium), which reflects the continuous interest in the above issues among Member States. The purpose of the meeting was to review the current status in the development of fuel pellet materials and to explore recent improvements in fuel rod designs for light and heavy water cooled power reactors. The meeting was attended by 45 specialists representing fuel vendors, nuclear utilities, research and development

  1. 21 CFR 886.1140 - Ophthalmic chair.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic chair. 886.1140 Section 886.1140 Food... DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1140 Ophthalmic chair. (a) Identification. An ophthalmic chair is an AC-powered or manual device with adjustable positioning in which a patient is to sit...

  2. 21 CFR 890.3100 - Mechanical chair.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mechanical chair. 890.3100 Section 890.3100 Food... DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Prosthetic Devices § 890.3100 Mechanical chair. (a) Identification. A mechanical chair is a manually operated device intended for medical purposes that is used to...

  3. Pulsed Power Peer Review Committee Report

    International Nuclear Information System (INIS)

    BLOOMQUIST, DOUGLAS D.

    2002-01-01

    In 1993, the Government Performance and Results Act (GPRA, PL 103-62) was enacted. GPRA, which applies to all federal programs, has three components: strategic plans, annual performance plans, and metrics to show how well annual plans are being followed. As part of meeting the GRPA requirement in FY2002, a 15-member external review committee chaired by Dr. Alvin Trivelpiece (the Trivelpiece Committee) was convened by Sandia National Laboratories (SNL) on May 7-9, 2002 to review Sandia National Laboratories' Pulsed Power Programs as a component of the Performance Appraisal Process negotiated with the National Nuclear Security Administration of the Department of Energy (NNSA/DOE). The scope of the review included activities in high energy density physics (HEDP), inertial confinement fusion (ICF), radiation/weapon physics, the petawatt laser initiative (PW) and fast ignition, equation-of-state studies, radiation effects science and lethality, x-ray radiography, ZR development, basic research and pulsed power technology research and development, as well as electromagnetics and work for others. In his charge to the Committee, Dr. Jeffrey P. Quintenz, Director of Pulsed Power Sciences (Org. 1600) asked that the evaluation and feedback be based on three criteria: (1) quality of technical activities in science, technology, and engineering, (2) programmatic performance, management, and planning, and (3) relevance to national needs and agency missions. In addition, the director posed specific programmatic questions. The accompanying report, produced as a SAND document, is the report of the Committee's finding

  4. Leadership experiences and characteristics of chairs of academic departments of psychiatry.

    Science.gov (United States)

    Keith, Samuel J; Buckley, Peter F

    2011-01-01

    Effective leadership in academic medicine requires a broad constellation of skills, experiences, and core values. The authors sought to describe and define these. The authors conducted a web-based survey among 132 Chairs of North American departments of psychiatry. Eighty-five Chairs (64%) responded to the survey, the majority of whom were first-time Chairs. Identified leadership attributes included strategic/visionary acumen, interpersonal communication skills, core administrative and academic/technical skills, motivational capacity, personal integrity, and altruism/tenacity. The identified values are consistent with the leadership attributes that are described as necessary for success in the business community. Developing the required skill-set among faculty who aspire to become a departmental Chair is an important commitment for Deans and extant psychiatry Chairs. Copyright © 2011 Academic Psychiatry

  5. The assessment of occupational protection conditions in workplaces with high levels of exposure to natural radiation. Report from a technical committee meeting. Working material

    International Nuclear Information System (INIS)

    2002-01-01

    Occupational exposure from natural radiation is, in the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) 2000 Report, estimated to contribute to more than 80 percent of the world-wide annual collective dose from occupational exposure, uranium mining excluded. The Agency's Radiation Safety Standards Series, the Requirements, and the Safety Guides (jointly sponsored by the Agency and the International Labour Office), address the control of occupational exposures from natural sources of radiation. In addition, some Safety Reports on specific issues are in the process of being finalized. Following upon recommendations to the Agency from its Member States to provide further guidance on the control of occupational exposure to natural radiation, a Technical Committee Meeting on Assessment of Occupational Radiation Protection Conditions in Workplaces with High Levels of Exposure to Natural Radiation was held in Vienna from 7 to 11 May 2001. The objective of the meeting was to produce an inventory of problem areas, make an assessment of the problem and propose a draft work plan for the Agency, This IAEA Working Material includes the report from the meeting, including the presentations made. Based on the recommendations made by the Technical Committee, a work plan is being initiated, implying that more attention will be paid to occupational exposure from natural radiation sources in the Occupational Radiation Protection programme

  6. ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics-Three Decades of High-Quality, Technically-Rigorous Normalization

    Science.gov (United States)

    Jenkins, Michael G.; Salem, Jonathan A.

    2016-01-01

    Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high-quality, technically-rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards contain testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards are used to generate accurate, reliable, repeatable and complete data. Within Committee C28, users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, 50 standards since the Committee's founding in 1986. This paper provides a detailed retrospective of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of standards for advanced ceramics to demonstrate their practical applications.

  7. Water chemistry and corrosion control of cladding and primary circuit components. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1999-12-01

    Corrosion is the principal life limiting degradation mechanism in nuclear steam supply systems, especially taking into account the trends to increase fuel burnup, thermal rate and cycle length. Primary circuit components of water cooled power reactors have an impact on Zr-based alloys behaviour due to crud (primary circuit corrosion products) formation, transport and deposition on heat transfer surfaces. Crud deposits influence water chemistry, radiation and thermal hydraulic conditions near cladding surface, and by this way-Zr-based alloy corrosion. During the last decade, significant improvements were achieved in the reduction of the corrosion and dose rates by changing the cladding material for one more resistant to corrosion or by the improvement of water chemistry conditions. However, taking into account the above mentioned tendency for heavier fuel duties, corrosion and water chemistry, control will remain a serious task to work with for nuclear power plant operators and scientists, as well as development of generally accepted corrosion model of Zr-based alloys in a water environment in a new millennium. Upon the recommendation of the International Working Group on Water Reactor Fuel Performance and Technology, water chemistry and corrosion of cladding and primary circuit components are in the focus of the IAEA activities in the area of fuel technology and performance. At present the IAEA performs two co-ordinated research projects (CRPs): on On-line High Temperature Monitoring of Water Chemistry and Corrosion (WACOL) and on Activity Transport in Primary Circuits. Two CRPs deal with hydrogen and hydride degradation of the Zr-based alloys. A state-of-the-art review entitled: 'Waterside Corrosion of Zirconium Alloys in Nuclear Power Plants' was published in 1998. Technical Committee meetings on the subject were held in 1985 (Cadarache, France), 1989 (Portland, USA), 1993 (Rez, Czech Republic). During the last few years extensive exchange of experience in

  8. Nuclear fuel behaviour modelling at high burnup and its experimental support. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-07-01

    The Technical Committee Meeting (TCM) included separate sessions on the specific topics of fuel thermal performance and fission product retention. On thermal performance, it is apparent that the capability exists to measure conductivity in high burnup fuel either by out-of-pile measurement or by instrumentation of test reactor rods. State-of-the-art modelling codes contain models for the conductivity degradation process, and hence adequate predictions of fuel temperature are achievable. Concerning fission product release, it is clear that many groups around the world are actively investigating the subject, with experimental and modelling programmes being pursued. However, a general consensus on the exact mechanisms of gas release and related gas bubble swelling has yet to emerge, even at medium burnup levels. Fission gas phenomena, not only the release to open volumes, but the whole sequence of processes taking place prior to this, need to be modelled in any modern fuel performance code. The presence of gaseous fission products may generate rapid fuel swelling during power transients, and this can cause PCI and rod failure. At high burnups, the quantity of released gases could give rise to pressures exceeding the safe limits. Modelling of pellet-cladding interaction (PCI) effects during transient operation is also an active area of study for many groups. In some situations a purely empirical approach to failure modelling can be justified, while for other applications a more detailed mechanistic approach is required. Another aspect of cladding modelling which was featured at the TCM concerned corrosion and hydriding. Although this issue can be the main life-limiting factor on fuel duty, it is apparent that modelling methods, and the experimental measurement techniques that underpin them, are adequate. A session was included on MOX fuel modelling. Substantial programmes of work, especially by the MOX vendors, appear to be underway to bring the level of understanding

  9. Advanced methods of process/quality control in nuclear reactor fuel manufacture. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2000-07-01

    technical committee meeting. Upon invitation of the Government of Germany and Siemens AG, KWU/Advanced Nuclear Fuel GmbH the meeting was held in Lingen, Germany from 18 to 22 October 1999. In total, 19 papers from 10 countries were grouped into four sessions which covered new developments for control of process and product quality, their implementation and results obtained including new approaches to employee motivation

  10. Chair-based fidgeting and energy expenditure.

    Science.gov (United States)

    Koepp, Gabriel A; Moore, Graham K; Levine, James A

    2016-01-01

    Sedentariness is associated with chronic health conditions, impaired cognitive function and obesity. Work contributes significantly to sedentariness because many work tasks necessitate sitting. Few sustained solutions exist to reverse workplace sedentariness. Here, we evaluated a chair and an under-table device that were designed to promote fidgeting while seated. Our hypothesis was that an under-table leg-fidget bar and/or a fidget-promoting chair significantly increased energy expenditure. We compared these devices with chair-based exercise and walking. We measured energy expenditure and heart rate in 16 people while they sat and worked using a standard chair, an under-desk device that encourages leg fidgeting and a fidget-promoting chair. We compared outcomes with chair-based exercise and walking. Energy expenditure increased significantly while using either an under-table leg-fidget bar or a fidget-promoting chair, when compared to the standard office chair (standard chair, 76±31 kcal/hour; leg-fidget bar, 98±42 kcal/hour (pchair, 89±40 kcal/hour (p=0.03)). However, heart rate did not increase significantly in either case. Bouts of exercise performed while seated provided energetic and heart rate equivalency to walking at 2 mph. Chairs and devices that promote fidgeting can increase energy expenditure by ∼20-30% but not increase heart rate. Dynamic sitting may be among a lexicon of options to help people move more while at work.

  11. Use of neutron beams for low and medium flux research reactors: Radiography and materials characterization. Report of a technical committee held in Vienna, 4-7 May 1993

    International Nuclear Information System (INIS)

    1995-10-01

    The present report is the result of the Technical Committee meeting held during 4-7 May 1993 in Vienna, Austria, and includes contributions from the participants. The Physics Section of the Department of Research and Isotopes was responsible for the co-ordination and compilation of the report. The report is intended to provide guidelines to research reactor owners and operators for promoting and developing their research programmes and industrial applications for neutron radiology, related neutron inspection and analytical techniques and neutron beam irradiation. Refs, figs and tabs

  12. Report on International Spaceborne Imaging Spectroscopy Technical Committee Calibration and Validation Workshop, National Environment Research Council Field Spectroscopy Facility, University of Edinburgh

    Science.gov (United States)

    Ong, C,; Mueller, A.; Thome, K.; Bachmann, M.; Czapla-Myers, J.; Holzwarth, S.; Khalsa, S. J.; Maclellan, C.; Malthus, T.; Nightingale, J.; hide

    2016-01-01

    Calibration and validation are fundamental for obtaining quantitative information from Earth Observation (EO) sensor data. Recognising this and the impending launch of at least five sensors in the next five years, the International Spaceborne Imaging Spectroscopy Technical Committee instigated a calibration and validation initiative. A workshop was conducted recently as part of this initiative with the objective of establishing a good practice framework for radiometric and spectral calibration and validation in support of spaceborne imaging spectroscopy missions. This paper presents the outcomes and recommendations for future work arising from the workshop.

  13. Summary report of consultants meeting on IAEA International Database on Irradiated Nuclear Graphite Properties. 11. meeting of the Technical Steering Committee

    International Nuclear Information System (INIS)

    Humbert, D.; Wickham, A.J.

    2009-05-01

    The 11th Meeting of the Technical Steering Committee for the International Database on Irradiated Nuclear Graphite Properties was held on 25-26 March 2009 at the IAEA Headquarters, Vienna, Austria. All discussions, recommendations and actions of this Consultants' Meeting are recorded in this report. The purposes of the meeting were to review the matters and actions identified in the previous meeting, undertake a review of the current status of the database, and make recommendations for action over the next year. This report contains the status of the identified actions as well as a summary of the recommendations on enhancements to the database. (author)

  14. SAM Technical Review Committee Final Report: Summary and Key Recommendations from the Onsite TRC Meeting Held April 22-23, 2013

    Energy Technology Data Exchange (ETDEWEB)

    Blair, N.; Dobos, S.; Janzou, S.; Gilman, P.; Freeman, J.; Kaffine, L.

    2013-08-01

    The System Advisor Model (SAM) is a broad and robust set of models and frameworks for analyzing both system performance and system financing. It does this across a range of technologies dominated by solar technologies including photovoltaics (PV) and concentrated solar power (CSP). The U.S. Department of Energy (DOE) Solar Energy Technology Program requested the SAM development team to review the photovoltaic performance modeling with the development community and specifically, with the independent engineering community. The report summarizes the major effort for this technical review committee (TRC).

  15. Natural circulation data and methods for advanced water cooled nuclear power plant designs. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2002-04-01

    The complex set of physical phenomena that occur in a gravity environment when a geometrically distinct heat sink and heat source are connected by a fluid flow path can be identified as natural circulation (NC). No external sources of mechanical energy for the fluid motion are involved when NC is established. Within the present context, natural convection is used to identify the phenomena that occur when a heat source is put in contact with a fluid. Therefore, natural convection characterizes a heat transfer regime that constitutes a subset of NC phenomena. This report provides the presented papers and summarizes the discussions at an IAEA Technical Committee Meeting (TCM) on Natural Circulation Data and Methods for innovative Nuclear Power Plant Design. While the planned scope of the TCM involved all types of reactor designs (light water reactors, heavy water reactors, gas-cooled reactors and liquid metal-cooled reactors), the meeting participants and papers addressed only light water reactors (LWRs) and heavy water reactors (HWRs). Furthermore, the papers and discussion addressed both evolutionary and innovative water cooled reactors, as defined by the IAEA. The accomplishment of the objectives of achieving a high safety level and reducing the cost through the reliance on NC mechanisms, requires a thorough understanding of those mechanisms. Natural circulation systems are usually characterized by smaller driving forces with respect to the systems that use an external source of energy for the fluid motion. For instance, pressure drops caused by vertical bends and siphons in a given piping system, or heat losses to environment are a secondary design consideration when a pump is installed and drives the flow. On the contrary, a significant influence upon the overall system performance may be expected due to the same pressure drops and thermal power release to the environment when natural circulation produces the coolant flow. Therefore, the level of knowledge for

  16. Life After Being a Pathology Department Chair

    Science.gov (United States)

    Lipscomb, Mary F.; Gorstein, Fred; Wilkinson, David; Sanfilippo, Fred

    2016-01-01

    Although there is a considerable literature on transition of faculty members to the position of department chair, there is a dearth of publications about transitioning from the chair to other activities including retirement. The Association of Pathology Chairs senior fellows (all of whom are former chairs of academic departments of pathology) made this topic a focus of discussion at the Association of Pathology Chairs 2016 Annual Meeting. Of the 33 senior fellows engaged in this discussion, following their time as chairs, a small majority (18) transitioned to other administrative posts within or outside the university, while the others either returned to the active faculty (7) or retired (8). The motivating factors and influences for transitioning from the chair were probed along with the processes used in executing the transition, such as the development of transition plans. The reasons for selecting the specific type of postchair activity were also investigated. There was extraordinary diversity in the type of post-chair activities pursued. To our knowledge, no other medical specialty has examined these issues, which may be potentially relevant for the career planning of active chairs. PMID:28725780

  17. Chair Lift Falls and Injuries in Children.

    Science.gov (United States)

    Glissmeyer, Eric W; Metzger, Ryan R; Bolte, Robert

    2018-02-01

    The objective of this study was to compare demographic injury and treatment characteristics of hospitalized pediatric cases of falls from chair lifts to cases of other ski and snowboarding injuries and identify potential interventions for preventing falls from chair lifts. Retrospective query of the trauma registry of Utah's only pediatric trauma center for children younger than 18 years requiring hospitalization for a ski or snowboarding injury from November 2004 to February 2014. There were 443 cases of hospitalized ski and snowboarding injuries during the study period. Twenty-nine cases (7%) fell from height while riding a chair lift. Children falling from chair lifts were more likely to be younger (6.9 years vs 12.1, P chair lift falls with a significant injury (abbreviated injury scale, ≥3) was lower extremity (4/29, all femur fractures). Patient age discriminated chair lift falls well (area under the receiver operating characteristic curve, 0.87) with age of 7 years and below predicting chair lift fall with a sensitivity of 76% and a specificity of 91%. Injuries requiring hospitalization after falls from chair lifts occur at regulated facilities and are more common in younger female children when compared with other ski and snowboarding injuries. Interventions for reducing falls from chair lifts may be most effective applied to children 7 years and younger.

  18. Life After Being a Pathology Department Chair

    Directory of Open Access Journals (Sweden)

    David N. Bailey MD

    2016-10-01

    Full Text Available Although there is a considerable literature on transition of faculty members to the position of department chair, there is a dearth of publications about transitioning from the chair to other activities including retirement. The Association of Pathology Chairs senior fellows (all of whom are former chairs of academic departments of pathology made this topic a focus of discussion at the Association of Pathology Chairs 2016 Annual Meeting. Of the 33 senior fellows engaged in this discussion, following their time as chairs, a small majority (18 transitioned to other administrative posts within or outside the university, while the others either returned to the active faculty (7 or retired (8. The motivating factors and influences for transitioning from the chair were probed along with the processes used in executing the transition, such as the development of transition plans. The reasons for selecting the specific type of postchair activity were also investigated. There was extraordinary diversity in the type of post-chair activities pursued. To our knowledge, no other medical specialty has examined these issues, which may be potentially relevant for the career planning of active chairs.

  19. The role of curriculum committees in pharmacy education.

    Science.gov (United States)

    Carter, Jean T; Draugalis, JoLaine R; Bruce, Susan P; Gonyeau, Michael R

    2011-10-10

    To conduct a follow-up survey of curriculum committee chairs in US colleges and schools of pharmacy to describe current committee structures and functions and determine whether changes have occurred over time. A descriptive cross-sectional study design using a 30-item survey instrument regarding the structure, function, and charges of curriculum committees was sent to 100 curriculum committee chairs. Several new variables were added to the questionnaire to explore the use of systematic reviews, oversight of experiential education, and the impact of accreditation standards on work focus. Eighty-five chairs responded. Curriculum committees are on average 1 person larger, less likely to have a student vote, more likely to have formal charges, and more likely to be involved in implementing an outcomes-based curriculum compared with 1994. Committees have shifted their work focus from review of curricular content to curricular revision. Curriculum committees continue to evolve as they respond to changes in pharmacy education and accreditation standards.

  20. 77 FR 14017 - World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory...

    Science.gov (United States)

    2012-03-08

    ... Conference, see the instructions at the Committee's Web site: http://www.cdc.gov/NIOSH/topics/wtc/stac... Trade Center (WTC) Program Administrator regarding additional WTC Health Program eligibility criteria and potential additions to the list of covered WTC-related health conditions. Title XXXIII of the...

  1. Automated chair-training of rhesus macaques.

    Science.gov (United States)

    Ponce, C R; Genecin, M P; Perez-Melara, G; Livingstone, M S

    2016-04-01

    Neuroscience research on non-human primates usually requires the animals to sit in a chair. To do this, typically monkeys are fitted with collars and trained to enter the chairs using either a pole, leash and jump cage. Animals may initially show resistance and risk injury. We have developed an automated chair-training method that minimizes restraints to ease the animals into their chairs. We developed a method to automatically train animals to enter a primate chair and stick out their heads for neckplate placement. To do this, we fitted the chairs with Arduino microcontrollers coupled to a water-reward system and touch- and proximity sensors. We found that the animals responded well to the chair, partially entering the chair within hours, sitting inside the chair within days and allowing us to manually introduce a door and neck plate, all within 14-21 sessions. Although each session could last many hours, automation meant that actual training person-hours could be as little as half an hour per day. The biggest advantage was that animals showed little resistance to entering the chair, compared to monkeys trained by leash pulling. This automated chair-training method can take longer than the standard collar-and-leash approach, but multiple macaques can be trained in parallel with fewer person-hours. It is also a promising method for animal-use refinement and in our case, it was the only effective training approach for an animal suffering from a behavioral pathology. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Unconventional options for plutonium disposition. Proceedings of a technical committee meeting held in Obninsk, Russian Federation, 7-11 November 1994

    International Nuclear Information System (INIS)

    1995-11-01

    This publication summarizes discussions and presents selected papers from a Technical Committee meeting that the IAEA convened in Obninsk, near Moscow, Russia, 7-11 November 1994 at the invitation of the Ministry of the Russian Federation on Atomic Energy, and which was hosted by the Institute of Physics and Power Engineering. The meeting focused on the disposition of plutonium produced from the operation of nuclear power plants in areas related to the nuclear fuel cycle. Plutonium is formed in all existing nuclear power plants and the unconsumed part remaining in spent fuel is a generic by-product of nuclear power generation. Over the next 15 to 20 years, a significant amount of plutonium will be produced in nuclear power stations worldwide, adding to amounts already in storage. Additionally, the world's plutonium stocks are being affected by decisions concerning the management and utilization of plutonium recovered from nuclear weapons which are being dismantled. In this context, national strategies are directed at reducing the stockpiles of separated plutonium worldwide, and in further developing technologies capable of safely and securely using and handling plutonium. The purpose of the IAEA's Technical Committee meeting was to consider unconventional approaches for plutonium disposition, both from the points of view of the fuel cycle as a whole and the specific types of nuclear fuel being used. The aims were to obtain technical descriptions of these approaches, engineering judgements on their technological status and development, and reports on national experience in this field. The meeting's results and conclusions are providing valuable guidance for future activities in this subject area. Refs, figs and tabs

  3. Axiology, the Subject and the Chair

    Science.gov (United States)

    Melville, Wayne; Campbell, Todd; Jones, Doug

    2017-08-01

    This article addresses two gaps in the literature related to science department chairs: the axiological relationship between the chair and science, the subject, and the perceptions of the chair with respect to teaching and learning within their departments. In this work, axiology is used to understand how the chair's values toward the subject influenced his own perceived capacity to lead learning within his department in a reformed discourse. A narrative inquiry methodology was used to consider the chair's experiences in the development of his identify over his life span in the form of two stories: (1) the relationship between the chair and science, the subject, and (2) the perceptions of the chair with regards to teacher learning within the department. The findings revealed that the work and career of the chair in this study were authored by strong elements of personal continuity and points of stability around the valuing of science, the subject, even as this valuing evolved from being more focused on epistemic values early in his career, to being more concerned with universal values connected to his legacy and his department later in his career.

  4. Leading Learning: Science Departments and the Chair

    Science.gov (United States)

    Melville, Wayne; Campbell, Todd; Jones, Doug

    2016-01-01

    In this article, we have considered the role of the chair in leading the learning necessary for a department to become effective in the teaching and learning of science from a reformed perspective. We conceptualize the phrase "leading learning" to mean the chair's constitution of influence, power, and authority to intentionally impact…

  5. Secondary School Department Chair Roles: Principal Expectations

    Science.gov (United States)

    Brent, Brian O.; Deangelis, Karen J.; Surash, Barbara M.

    2014-01-01

    The literature on the principalship is extensive, revealing ways in which principals can foster or impede school success. At the same time, another formal secondary school-level position, the department chair, has garnered little scholarly attention. Thus far, the literature offers a limited account of the roles that chairs should or do perform in…

  6. 32 CFR 2700.51 - Information Security Oversight Committee.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Information Security Oversight Committee. 2700... MICRONESIAN STATUS NEGOTIATIONS SECURITY INFORMATION REGULATIONS Implementation and Review § 2700.51 Information Security Oversight Committee. The OMSN Information Security Oversight Committee shall be chaired...

  7. 32 CFR 2103.51 - Information Security Oversight Committee.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Information Security Oversight Committee. 2103... BE DECLASSIFIED Implementation and Review § 2103.51 Information Security Oversight Committee. The NCS Information Security Oversight Committee shall be chaired by the Staff Counsel of the National Security...

  8. 76 FR 17424 - President's National Security Telecommunications Advisory Committee

    Science.gov (United States)

    2011-03-29

    ... Telecommunications Advisory Committee AGENCY: National Protection and Programs Directorate, DHS. ACTION: Committee... Telecommunications Advisory Committee (NSTAC) will meet on Tuesday, April 19, 2011, via a conference call. The... matters related to national security and emergency preparedness telecommunications policy. The NSTAC Chair...

  9. Safe handling, transport and storage of plutonium. Proceedings of a technical committee meeting held in Vienna, 18-21 October 1993

    International Nuclear Information System (INIS)

    1994-10-01

    Plutonium inventories and utilization rates worldwide are growing. It is important for nuclear power programmes everywhere that no incidents or accidents with plutonium occur. It is therefore important that all who deal with plutonium, do so safely. All those who deal with plutonium should have available the best information on safety handling and storage. Several countries have mature plutonium programmes. However, information exchange on plutonium has been limited. This has precluded the development until now of consensus documentation on safe handling and storage of plutonium. The Technical Committee has been established to address these problems and this Technical Document is the first product in this process. The purpose of the meeting was to bring together experts with significant experience in handling, transporting and storing plutonium; to exchange information and experiences dealing with plutonium at their facilities; to describe their practices (guidelines, procedures, regulations, etc.) for safely dealing with plutonium; to assess the need to develop and publish a consensus plutonium safety practices document(s), and to recommend possible future IAEA activities in this technical area. Refs, figs and tabs

  10. Technologies for improving the availability and reliability of current and future water cooled nuclear power plants. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1998-11-01

    One of the activities of the IAEA is to provide all Member States with an international source of balanced, objective information on advanced in technology for water cooled reactors. Since the global nuclear industry has a common interest in improving plant availability and reliability to assure specific individual plant and country perspective as well as to have an image of well managed competitive industry, the IAEA held a Technical Committee Meeting on Technologies for Improving the Availability and Reliability of Current and Future Water Cooled Nuclear Power Plants in September 1997. The basic aim to was to identify, review and exchange information on international developments in technologies for achieving high availability and reliability and to suggest areas where further technical advances could contribute to improvement of performance. Designs for future plants were presented in the context of how they can accommodate both the organizational and technical means for reaching even higher levels of performance. This proceedings contains the contributed papers presented at this Meeting each with a separate abstract. Four sessions were concerned with: policies, practices and procedures for achieving high reliability and availability; improving availability and reliability through better use of today's technologies; recent advances in technologies for improving availability and reliability; achieving high availability for new plants

  11. Mechanical properties of self-compacting concrete state-of-the-art report of the RILEM technical committee 228-MPS on mechanical properties of self-compacting concrete

    CERN Document Server

    Schutter, Geert

    2014-01-01

    The State-of-the-Art Report of RILEM Technical Committee 228-MPS on Mechanical properties of Self-Compacting Concrete (SCC) summarizes an extensive body of information related to mechanical properties and mechanical behaviour of SCC. Due attention is given to the fact that the composition of SCC varies significantly. A wide range of  mechanical properties are considered, including compressive strength, stress-strain relationship, tensile and flexural strengths, modulus of elasticity, shear strength, effect of elevated temperature, such as fire spalling and residual properties after fire, in-situ properties, creep, shrinkage, bond properties, and structural behaviour. A chapter on fibre-reinforced SCC is included, as well as a chapter on specialty SCC, such as light-weight SCC, heavy-weight SCC, preplaced aggregate SCC, special fibre reinforced SCC, and underwater concrete.

  12. In-core fuel management: Reloading techniques. Proceedings of a technical committee meeting and workshop held in Vienna, 19-21 October 1992

    International Nuclear Information System (INIS)

    1995-08-01

    The purpose of the Technical Committee Meeting and Workshop on In-core Fuel Management - Reloading Techniques, convened by the IAEA in Vienna from 19 to 21 October 1992, was to provide an international forum to review and discuss in-core fuel management reloading techniques for light water reactors. A presentation of the history and status of reloading techniques was given by S.H. Levine, Pennsylvania State University, and papers on various computer code descriptions, methodologies and experiences of utilities and vendors for nuclear fuel reloading were presented and discussed. Optimization techniques for reloadings, expert system codes and the number of energy groups used in reloading calculations were discussed in more detail during a workshop session. Refs, figs and tabs

  13. Technical committee meeting 'to produce draft topical documents on provisions for the application of the regulations for the safe transport of radioactive material'. Chairman's report

    International Nuclear Information System (INIS)

    Baekelandt, Luc

    2000-01-01

    In 1996 a new Edition of the IAEA Transport Regulations was published as ST-1. These Regulations have been re-issued in 2000 as TS-R-1 (ST-1, Revised) with only minor editorial changes. These Regulations have not entered into force yet (at the time of this publication) through their incorporation in the legally binding modal regulations; currently it is foreseen that the modal requirements will enter into force during 2001, with transitional periods ranging from zero to twelve months. Nevertheless, a revision process has been started that must lead to a new edition of the regulations in 2003, becoming actually effective in 2005. This document contains the conclusions and recommendations made by the Technical Committee at the meeting. It also contains the reports of the working groups, outlines of draft TECDOCs on radiation protection programmes and on transition from SS 6 to TS-R-1

  14. Advances in control assembly materials for water reactors. Proceedings of a technical committee meeting held in Vienna, 29 November - 2 December 1993

    International Nuclear Information System (INIS)

    1995-07-01

    To obtain an overall picture of the current usage of control materials, research under way on new materials and to identify areas where materials are necessary to improve the safety, reliability and/or economics of water reactors, the IAEA convened a Technical Committee Meeting on Advances in Control Materials for Water Reactors. This meeting was recommended by the International Working Group on Fuel Performance and Technology and was held in Vienna from 29 November to 2 December 1993. Twenty-seven participants from twelve different countries attended the meeting and twelve papers were presented and are reproduced in these proceedings together with a summary of the meeting. A separate abstract was prepared for each of the papers. Refs, figs and tabs

  15. Progress in design, research and development and testing of safety systems for advanced water cooled reactors. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1996-04-01

    The meeting covered the following topics: Developments in design of safety-related heat removal components and systems for advanced water cooled reactors; status of test programmes on heat removal components and systems of new designs; range of validity and extrapolation of test results for the qualification of design/licensing computer models and codes for advanced water cooled reactors; future needs and trends in testing of safety systems for advanced water cooled reactors. Tests of heat removal safety systems have been conducted by various groups supporting the design, testing and certification of advanced water cooled reactors. The Technical Committee concluded that the reported test results generally confirm the predicted performance features of the advanced designs. Refs, figs, tabs

  16. Changes and events in uranium deposit development, exploration, resources, production and the world supply-demand relationship. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-09-01

    This report consists of the proceedings of the Technical Committee Meeting on Recent Changes and Events in Uranium Deposit Development, Exploration, Resources, Production and the World Supply/Demand Relationship, held in co-operation with the OECD Nuclear Energy Agency (OECD/NEA) in Kiev, Ukraine, from 22 to 26 May 1995. Some of the information from this meeting was also used in preparation of the 1995 edition of ''Uranium - Resources, Production and Demand'' a joint report by the OECD/NEA and the IAEA. At the Beginning of 1995 there were 432 nuclear power plants in operation with a combined electricity generating capacity of 340 GW(e). This represents nearly a 100% increase over the last decade. In 1995 over 2228 TW·h of electricity were generated, equivalent to about 17% of the world's total electricity. To achieve this, about 61,000 t U were required as nuclear fuel. For about a decade and a half uranium production and related activities have been decreasing because of declining uranium prices. For many participants in the nuclear industry there has been little interest in uranium supply because of the oversupplied market condition. The declining production led to the development of a supply and demand balance were production is currently meeting a little over 50% of reactor requirements and the excess inventory is being rapidly drawn down. This very unstable relationship has resulted in great uncertainty about the future supply or uranium. One of the objectives of this Technical Committee meeting was to bring together specialists in the field of uranium supply and demand to collect information on new developments. This helps provide a better understanding of the current situation, as well as providing information to plan for the future. Refs, figs, tabs

  17. Committee on Atomic, Molecular, and Optical Sciences (CAMOS). Technical progress report ampersand continuation proposal, February 1, 1993--January 31, 1994

    International Nuclear Information System (INIS)

    Taylor, R.D.

    1997-01-01

    The Committee on Atomic, Molecular and Optical Sciences (CAMOS) of the National Research Council (NRC) is charged with monitoring the health of the field of atomic, molecular, and optical (AMO) science in the United States. Accordingly, the Committee identifies and examines both broad and specific issues affecting the field. Regular meetings, teleconferences, briefings from agencies and the scientific community, the formation of study panels to prepare reports, and special symposia are among the mechanisms used by the CAMOS to meet its charge. This progress report presents a review of CAMOS activities from February 1, 1993 to January 31, 1994. The details of prior activities are discussed in earlier progress reports. This report also includes the status of activities associated with the CAMOS study on the field that is being conducted by the Panel on the Future of Atomic, Molecular, and Optical Sciences (FAMOS). During the above period, CAMOS has continued to track and participate in, when requested, discussions on the health of the field. Much of the perspective of CAMOS has been presented in the recently-published report Research Briefing on Selected Opportunities in Atomic, Molecular, and Optical Sciences. That report has served as the basis for briefings to representatives of the federal government as well as the community-at-large. In keeping with its charge to monitor the health of the field, CAMOS launched a study designed to highlight future directions of the field

  18. Tribal Geographic Area (RTOC) Polygons with Representative Information, US EPA Region 9, 2015, Regional Tribal Operations Committee

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Regional Tribal Operations Committee (RTOC) is a working committee of EPA and Tribal personnel co-chaired by an EPA representative and a Tribal representative....

  19. Editorial Conference Comments by the General Chair

    Science.gov (United States)

    Reed, Robert A.

    2017-01-01

    The 53rd IEEE Nuclear and Space Radiation Effects Conference (NSREC) was held July 11-15, 2016, at the Oregon Convention Center in Portland; the conference hotel was the Portland Doubletree. The NSREC is recognized as one of the premier international conferences on radiation effects in electronic materials, devices, and systems. The 2016 conference continued this tradition with a strong technical program, a one-day tutorial short course, radiation effects data workshop, industrial exhibit, and meetings for the IEEE Women in Engineering and Young Professionals organizations. The conference was sponsored by the Radiation Effects Committee of the IEEE Nuclear and Plasma Sciences Society (NPSS), and supported by Atmel, BAE Systems, Boeing, Cobham Semiconductor Solutions, Freebird Semiconductor, Honeywell, International Rectifier, Intersil Corporation, Jet Propulsion Laboratory, Northrop Grumman, Southwest Research Institute, and VPT Rad.

  20. Cerebral oxygen desaturation during beach chair position

    NARCIS (Netherlands)

    Moerman, Annelies T.; de Hert, Stefan G.; Jacobs, Tom F.; de Wilde, Lieven F.; Wouters, Patrick F.

    2012-01-01

    Cases of ischaemic brain damage have been reported in relatively healthy patients undergoing shoulder surgery in the beach chair position. Unrecognised cerebral hypoperfusion may have contributed to these catastrophic events, indicating that routine anaesthesia monitoring may not suffice.

  1. Planning and management of uranium mine and mill closures. Proceedings of a technical committee meeting held in Liberec, Czech Republic, 3-6 May 1994

    International Nuclear Information System (INIS)

    1995-09-01

    The Technical Committee Meeting on Planning and Management of Uranium Mine and Mill Closures was held in Liberec, Czech Republic from 3 to 6 May 1994. A total of 30 participants from nine countries attended the meeting. Nineteen papers were presented. Most of these papers dealt with the concept of and experiences in planning for and the subsequent decommissioning and rehabilitation of uranium mines and mills in Australia, Canada, Czech Republic, Germany, Romania, Slovenia, Spain and the USA. Two papers discussed the government's role and relevant regulations related to the closures, decommissioning and remediation of uranium production facilities. Of particular interest to the participants was a non-technical paper presented by the Mayor of the city of Andujar, Spain, describing the negative political and socio-economic impacts associated with closure and decommissioning of an uranium mine/mill facility. The highlights of the meeting were the field visits to the uranium production facilities and rehabilitation programme sites of DIAMO and WISMUT companies, located respectively in Straz, Czech Republic and Koenigstein, Germany. Refs, figs and tabs

  2. Factors determining the long term back end nuclear fuel cycle strategy and future nuclear systems. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2002-05-01

    The Technical Committee Meeting (TCM) was held in Vienna on 8-10 November 1999; it was organized by the International Atomic Energy Agency and attended by 26 participants from 16 Member States. The purpose of the meeting was to exchange information among experts on the back end fuel cycle strategies adopted by Member States; to identify key factors determining the long-term back end fuel cycle strategies; and to assess the applicability of these factors to future nuclear systems. Issues associated with the back end fuel cycle supporting a country's nuclear power programme are technical, economic, institutional and political. This TCM provided an opportunity to address these issues and their impacts to the back end fuel cycles, as well as to identify and assess factors affecting the back end fuel cycle strategies. The discussion was organized ib the following topical sessions: the nuclear fuel cycle; spent fuel management; waste management and repository; plutonium management. This document contains a summary of the meeting and 22 individual papers presented by participants. Each of the papers was indexed separately

  3. Proceedings of the technical committee meeting on sodium removal and disposal from LMFRs in normal operation and in the framework of decommissioning

    International Nuclear Information System (INIS)

    Latge, C.

    1997-11-01

    This publication summarizes discussions and presented papers from the Technical Committee meeting on sodium removal and disposal from liquid metal fast reactors in normal operation and in the framework of decommissioning, organised by IAEA. The objective of this meeting was to provide a forum to review and exchange information on the international developments in technologies of sodium removal and disposal from liquid metal fast reactor components and systems in operation and maintenance conditions, and in framework of decommissioning. The technical parts of the meeting covered the three major subjects: sodium removal (cleaning) process, decontamination process and bulk disposal of sodium in the framework of decommissioning. These technologies were reviewed with regard to their implementation into current plants to improve operation and maintenance, and to develop an effective decommissioning program. Further, design for future Liquid metal fast reactors were reviewed in the context how they can accommodate today's technologies. The meeting resulted in an effective information exchange with the Member States sharing their needs as well as experiences in the mentioned topics

  4. EI2N 2009 PC Co-chairs' Message

    Science.gov (United States)

    Panetto, Hervé; Bernus, Peter; Gonçalves, Ricardo; Goranson, Ted

    After the successful third edition in 2008, the fourth edition of the Enterprise Integration, Interoperability and Networking workshop (EI2N 2009) was organized as part of the OTM 2009 Federated Conferences and was supported by the IFAC Technical Committee 5.3 "Enterprise Integration and Networking" and the IFIP Working Group 5.12 "Architectures for Enterprise Integration."

  5. 21 CFR 880.6140 - Medical chair and table.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Medical chair and table. 880.6140 Section 880.6140... Devices § 880.6140 Medical chair and table. (a) Identification. A medical chair or table is a device intended for medical purposes that consists of a chair or table without wheels and not electrically powered...

  6. Pediatric dental chair vs. traditional dental chair: A pediatric dentist′s poll

    Directory of Open Access Journals (Sweden)

    Khushboo Barjatya

    2015-01-01

    Full Text Available Objective: Proper positioning of the child patient, can not only have positive ramifications for the operator′s posture, comfort, and career longevity - it can also lead to better treatment and increased productivity. The aim of the survey questionnaire was to assess the utilization, need, and attitude concerning dental chairs among pediatric dentist while working on and managing the child patient. Study Design: The questions were structured using adobe forms central online software, regarding the user-friendliness of pediatric dental chair vs. traditional adult dental chair available in the market. Results: Our result shows that out of 337 respondents, 79% worked on pediatric dental chair, whereas 21% had no experience of it. Of these 79% pediatric dentist, 48% preferred pediatric dental chair. But pediatric dental problem still has certain disadvantages like higher cost, leg space problem, lower availability, etc. Conclusion: During the research it was found that ergonomics and usability issues were the main problems. Thus, pediatric dental chair is not so popular in the current scenario. This study allowed for general ideas for the improvement of dental chairs and thus improved dental chair would fill the gap in the current scenario.

  7. Pediatric dental chair vs. traditional dental chair: a pediatric dentist's poll.

    Science.gov (United States)

    Barjatya, Khushboo; Vatsal, Ankur; Kambalimath, Halaswamy V; Kulkarni, Vinay Kumar; Reddy, Naveen Banda

    2015-01-01

    Proper positioning of the child patient, can not only have positive ramifications for the operator's posture, comfort, and career longevity - it can also lead to better treatment and increased productivity. The aim of the survey questionnaire was to assess the utilization, need, and attitude concerning dental chairs among pediatric dentist while working on and managing the child patient. The questions were structured using adobe forms central online software, regarding the user-friendliness of pediatric dental chair vs. traditional adult dental chair available in the market. Our result shows that out of 337 respondents, 79% worked on pediatric dental chair, whereas 21% had no experience of it. Of these 79% pediatric dentist, 48% preferred pediatric dental chair. But pediatric dental problem still has certain disadvantages like higher cost, leg space problem, lower availability, etc. During the research it was found that ergonomics and usability issues were the main problems. Thus, pediatric dental chair is not so popular in the current scenario. This study allowed for general ideas for the improvement of dental chairs and thus improved dental chair would fill the gap in the current scenario.

  8. Noise analysis in professional office chairs.

    Science.gov (United States)

    Alves, E J W; Filho, J N; Silva, S J; Câmara, J J D

    2012-01-01

    The noise caused by the movement of users on their chairs in the work environment may indicate structural weaknesses and risk, and still significantly reduce productivity by increasing employees stress level. By understanding the activities to be developed in a work place one may understand what should be necessary to a good development, thereafter a search for improvement of labor activity with the aim of better use of resources in the operation of product use may be done. The analysis of the incremental variation of noise in professional chairs aims to identify its origin and the time the emission of noise starts during the period of use, its development and the major causative agents. Determining the characteristics of the sound of different materials and adjustments mechanisms of the chair can determine how different materials interact with each other. The measurement of these noises in an acoustic isolated room using directional microphones, if recorded and analyzed properly makes it possible to investigate and orientate to suspect elements in order to propose solutions and identify the quality of other similar chairs. Based on the results recommendations can be established for the orientation of users, managers and people responsible for the acquisition of the products, inducing them to review the employment of materials and the choice of the processes of production. These aspects are not covered in the Brazilian ergonomics norms and standards in the use of chairs.

  9. Experimental tests and qualification of analytical methods to address thermohydraulic phenomena in advanced water cooled reactors. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2000-05-01

    Technical Committee Meeting on Experimental Tests and Qualification of Analytical Methods to Address Thermohydraulic Phenomena in Advanced Water Cooled Reactors was convened to review the current status and the remaining needs in this field

  10. Application of uranium exploration data and techniques in environmental studies. Proceedings of a technical committee meeting held in Vienna, 9-12 November 1993

    International Nuclear Information System (INIS)

    1995-10-01

    Exploration for mineral commodities, uranium included normally utilizes extensive, systematic geophysical and geochemical surveys covering very large areas, often entire countries. This information represents a great wealth of data that could be used to produce baseline information for environmental studies and monitoring. It is with this appreciation that IAEA convened a Technical Committee meeting with the purpose of bringing together experts in uranium exploration, geophysics and geochemistry to discuss and exchange information on the benefits of past exploration data and commonly applied techniques in environmental studies. The meeting on the Use of Uranium Exploration Data and Techniques in Environmental Studies was attended by 44 participants from 23 countries and one international organization. Thirty-two papers covering case histories on the use of old uranium exploration data to prepare exposure dose rate and radon potential maps, the use of airborne gamma ray spectrometric systems to monitor nuclear power plants and nuclear fuel cycle facilities, and the use of similar systems in response to emergency measures in the case of accidental releases were presented. Refs, figs and tabs

  11. Reliability of computerized safety systems at nuclear power plants. Report of a technical committee meeting held in Vienna, 21-25 June 1993

    International Nuclear Information System (INIS)

    1995-03-01

    Computer based technology is increasingly used in order to perform safety functions. In some recently designed nuclear power plants the whole safety system is computerized. In older plants replacement of conventional technology based system is seen to be of benefit. If the new technology is to be used, it must meet at least the same level of quality and reliability requirements as specified for conventional technology. However, there is a potential for enhancing the safety of nuclear power plants if the full power of computer technology is applied correctly through well designed, engineered and tested systems which are properly installed and maintained. It is essential that areas where reliability and quality can be improved are identified and that methods for assessing and assuring reliability are developed. The results of the Technical Committee Meeting on Reliability of Computerized Safety Systems at Nuclear Power Plants presented in this report are a step on the road to this goal of improved nuclear safety. Refs, figs and tabs

  12. Recent developments in uranium resources and supply. Proceedings of a technical committee meeting held in Vienna, 24-28 May 1993

    International Nuclear Information System (INIS)

    1995-09-01

    In recent years substantial uncertainties regarding uranium supply have made it very difficult for both uranium producers and users to plan for the future. In 1992 uranium production met only about 63 percent of reactor requirements. This resulted in a very unstable supply/demand balance where inventory drawdown (supplemented by minor amounts of reprocessing) filled the 20,960 tonne shortfall. The IAEA convened this Technical Committee meeting to take advantage of the new opportunities to collect and analyse information related to the future supply and demand balance and to help reduce uncertainties regarding the relationship. The meeting was effective in bringing together experts from all regions to share, exchange and disseminate information regarding uranium related activities. This meeting on Recent Developments in Uranium Resources and Supply was held in Vienna from 24 to 26 May 1993. It was attended by 47 participants from 23 countries. Twenty-one papers were presented. Contributions from China, the Czech Republic, India, Kazakhstan, Mongolia, Romania and the Russian Federation represent new information in this field. Refs, figs and tabs

  13. Life After Being a Pathology Department Chair II

    Directory of Open Access Journals (Sweden)

    David N. Bailey MD

    2017-10-01

    Full Text Available The 2016 Association of Pathology Chairs annual meeting featured a discussion group of Association of Pathology Chairs senior fellows (former chairs of academic departments of pathology who have remained active in Association of Pathology Chairs that focused on how they decided to transition from the chair, how they prepared for such transition, and what they did after the transition. At the 2017 annual meeting, the senior fellows (encompassing 481 years of chair service discussed lessons they learned from service as chair. These lessons included preparation for the chairship, what they would have done differently as chair, critical factors for success as chair, factors associated with failures, stress reduction techniques for themselves and for their faculty and staff, mechanisms for dealing with and avoiding problems, and the satisfaction they derived from their service as chair. It is reasonable to assume that these lessons may be representative of those learned by chairs of other specialties as well as by higher-level academic administrators such as deans, vice presidents, and chief executive officers. Although the environment for serving as a department chair has been changing dramatically, many of the lessons learned by former chairs are still valuable for current chairs of any length of tenure.

  14. Life After Being a Pathology Department Chair II

    Science.gov (United States)

    Lipscomb, Mary F.; Gorstein, Fred; Wilkinson, David; Sanfilippo, Fred

    2017-01-01

    The 2016 Association of Pathology Chairs annual meeting featured a discussion group of Association of Pathology Chairs senior fellows (former chairs of academic departments of pathology who have remained active in Association of Pathology Chairs) that focused on how they decided to transition from the chair, how they prepared for such transition, and what they did after the transition. At the 2017 annual meeting, the senior fellows (encompassing 481 years of chair service) discussed lessons they learned from service as chair. These lessons included preparation for the chairship, what they would have done differently as chair, critical factors for success as chair, factors associated with failures, stress reduction techniques for themselves and for their faculty and staff, mechanisms for dealing with and avoiding problems, and the satisfaction they derived from their service as chair. It is reasonable to assume that these lessons may be representative of those learned by chairs of other specialties as well as by higher-level academic administrators such as deans, vice presidents, and chief executive officers. Although the environment for serving as a department chair has been changing dramatically, many of the lessons learned by former chairs are still valuable for current chairs of any length of tenure. PMID:29057316

  15. IEEE Committee on Man and Radiation--COMAR technical information statement radiofrequency safety and utility Smart Meters.

    Science.gov (United States)

    Bushberg, Jerrold T; Foster, Kenneth R; Hatfield, James B; Thansandote, Arthur; Tell, Richard A

    2015-03-01

    This Technical Information Statement describes Smart Meter technology as used with modern electric power metering systems and focuses on the radio frequency (RF) emissions associated with their operation relative to human RF exposure limits. Smart Meters typically employ low power (-1 W or less) transmitters that wirelessly send electric energy usage data to the utility company several times per day in the form of brief, pulsed emissions in the unlicensed frequency bands of 902-928 MHz and 2.4-2.48 GHz or on other nearby frequencies. Most Smart Meters operate as wireless mesh networks where each Smart Meter can communicate with other neighboring meters to relay data to a data collection point in the region. This communication process includes RF emissions from Smart Meters representing energy usage as well as the relaying of data from other meters and emissions associated with maintaining the meter's hierarchy within the wireless network. As a consequence, most Smart Meters emit RF pulses throughout the day, more at certain times and less at others. However, the duty cycle associated with all of these emissions is very small, typically less than 1%, and most of the time far less than 1%, meaning that most Smart Meters actually transmit RF fields for only a few minutes per day at most. The low peak power of Smart Meters and the very low duty cycles lead to the fact that accessible RF fields near Smart Meters are far below both U.S. and international RF safety limits whether judged on the basis of instantaneous peak power densities or time-averaged exposures. This conclusion holds for Smart Meters alone or installed in large banks of meters.

  16. Campus Improvement Committee Working to Increase Morale, Productivity | Poster

    Science.gov (United States)

    The Campus Improvement Committee (CIC) has recently been re-established, with Mike Addington, manager, Operations and Maintenance, as chair. Addington is excited to be involved in a committee that’s so near and dear to his heart, and he’s a big believer in the value of increasing morale and productivity through an appealing and pleasant work environment.

  17. Jumping From a Chair is a More Sensitive Measure of Power Performance In Older Adults Than Chair Rising.

    Science.gov (United States)

    Zemková, Erika; Jeleň, Michal; Schickhofer, Peter; Hamar, Dušan

    2016-01-01

    Background/Study Context: The study estimates the reliability of peak velocity and peak power during chair rising and chair jumping tests and their ability to discriminate between different age and physical activity level groups. Physically active and sedentary individuals (N = 262) of different ages (young: 22.9 ± 2.0 years, range: 21-25 years; older: 63.1 ± 1.8 years, range: 61-65 years) performed, in random order, chair rising and chair jumping tests on a force plate. Randomly selected young subjects performed both tests repeatedly on two different occasions separated by 1 week. From the sitting position with the arms crossed on the chest, they either stand up completely (chair rising test), or jump as high as possible (chair jumping test). The test-retest reliability of peak power and peak velocity during chair rising as well as chair jumping was excellent, with high intraclass correlation coefficients (ICCs; .90-.98) and low standard error of measurement (SEM; 7.0-9.1%). Post hoc analysis revealed significant differences in peak power and peak velocity between the sedentary and physically active young and older subjects. However, greater coefficients of variation for both parameters were found for chair jumping than chair rising (21.1-40.2% vs. 11.0-15.2%). Additionaly, there were moderate correlations of peak power and peak velocity between chair rising and chair jumping (r = .42-.49). There were greater within- and between-group differences in peak force and peak power and a steeper increase in their values during the initial phase of chair jumping than chair rising. Both chair rising and chair jumping tests provide reliable data and are valid indicators of lower body power in young and older adults. However, jumping from a chair is a more sensitive measure of strength and power performance than chair rising.

  18. International Research Chairs Initiative | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The International Research Chairs Initiative (IRCI) is a seven-year, CA$8 million research program that pairs top research talent from universities in Canada with their counterparts in developing countries to address key development challenges. These specialists share their advanced skills and knowledge to confront issues ...

  19. Repositioning chairs in benign paroxysmal positional vertigo

    DEFF Research Database (Denmark)

    West, Niels; Hansen, Søren; Møller, Martin Nue

    2016-01-01

    %) experienced relapse within the ½-year follow-up period. Horizontal cupulolithiasis and multi-canal affection constituted the most resilient cases. The literature search identified 9 repositioning chair studies. The EO and the TRV are highly valuable assets in diagnosis and management of BPPV of particularly...

  20. CALL FOR EXTENDED CONCEPT NOTES ECOHEALTH CHAIRS ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Marie-Isabelle Beyer

    CALL FOR EXTENDED CONCEPT NOTES. Page 1 of 1. ECOHEALTH CHAIRS in HEALTH and GLOBAL ENVIRONMENTAL CHANGE in. SUB-SAHARAN AFRICA. Eligible countries. Organizations and researchers based in the eligible country list below can apply as team to this Call. Within limits of. Canadian law and ...

  1. Committees and sponsors

    Science.gov (United States)

    2011-10-01

    International Advisory Committee Richard F CastenYale, USA Luiz Carlos ChamonSão Paulo, Brazil Osvaldo CivitareseLa Plata, Argentina Jozsef CsehATOMKI, Hungary Jerry P DraayerLSU, USA Alfredo Galindo-UribarriORNL & UT, USA James J KolataNotre Dame, USA Jorge López UTEP, USA Joseph B NatowitzTexas A & M, USA Ma Esther Ortiz IF-UNAM Stuart PittelDelaware, USA Andrés SandovalIF-UNAM Adam SzczepaniakIndiana, USA Piet Van IsackerGANIL, France Michael WiescherNotre Dame, USA Organizing Committee Libertad Barrón-Palos (Chair)IF-UNAM Roelof BijkerICN-UNAM Ruben FossionICN-UNAM David LizcanoININ Sponsors Instituto de Ciencias Nucleares, UNAMInstituto de Física, UNAMInstituto Nacional de Investigaciones NuclearesDivisión de Física Nuclear de la SMFCentro Latinoamericano de Física

  2. Seismic evaluation of existing nuclear power plants and other facilities V. 1. Proceedings of the technical committee meeting. Working material

    International Nuclear Information System (INIS)

    2002-01-01

    invited to fulfil the attached Technical Background Form

  3. 75 FR 54852 - National Defense Stockpile Market Impact Committee Request for Public Comments on the Potential...

    Science.gov (United States)

    2010-09-09

    ... Defense Stockpile Market Impact Committee Request for Public Comments on the Potential Market Impact of... Market Impact Committee, co-chaired by the Departments of Commerce and State, is seeking public comments... Annual Materials Plan. The Committee is seeking public comments on the potential market impact of the...

  4. 78 FR 61400 - Advisory Committee for Education and Human Resources; Notice of Meeting

    Science.gov (United States)

    2013-10-03

    ... NATIONAL SCIENCE FOUNDATION Advisory Committee for Education and Human Resources; Notice of...) education and human resources programming. Agenda November 6, 2013 Remarks by the Committee Chair and NSF Assistant Director for Education and Human Resources (EHR) Brief updates on EHR and Committee of Visitor...

  5. Science Instructional Leadership: The Role of the Department Chair

    Science.gov (United States)

    Peacock, Jeremy S.

    2014-01-01

    With science teachers facing comprehensive curriculum reform that will shape science education for decades to come, high school department chairs represent a critical resource for instructional leadership and teacher support. While the historical literature on the department chair indicates that chairs are in prime positions to provide…

  6. The effect of a dynamic chair on seated energy expenditure.

    Science.gov (United States)

    Synnott, Aoife; Dankaerts, Wim; Seghers, Jan; Purtill, Helen; O'Sullivan, Kieran

    2017-10-01

    Dynamic sitting approaches have been advocated to increase seated energy expenditure with the view of lessening the sedentary nature of the task. This study compared energy expenditure (EE) and overall body discomfort on a novel dynamic chair with a standard office chair. Fifteen pain-free participants completed a DVD viewing task on both chairs in a randomised order. Energy expenditure and discomfort were collected simultaneously. Linear mixed models were used to analyse steady-state EE recorded on each of the chairs. Differences in discomfort were analysed using Wilkoxon Signed Rank Tests. Sitting on the novel dynamic chair significantly (p = 0.005) increased energy expenditure compared to a standard office chair. The discomfort experienced was mild overall, but was significantly greater on the dynamic chair (p = 0.004). Whilst the EE was seen to be significantly higher on the dynamic chair, the MET values are still below 1.5 METS. Thus, the use of a dynamic chair does not seem to be the most effective measure to prevent sedentary behaviour. Practitioner Summary: Sitting on a dynamic chair increased energy expenditure compared to sitting on a standard office chair among pain-free participants. Whilst the EE was seen to be significantly higher on the dynamic chair, the MET values are still below 1.5 METS (low level EE).

  7. 21 CFR 872.6250 - Dental chair and accessories.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental chair and accessories. 872.6250 Section 872...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6250 Dental chair and accessories. (a) Identification. A dental chair and accessories is a device, usually AC-powered, in which a patient sits. The...

  8. 7 CFR 1900.6 - Chair, Loan Resolution Task Force.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Chair, Loan Resolution Task Force. 1900.6 Section... AGRICULTURE PROGRAM REGULATIONS GENERAL Delegations of Authority § 1900.6 Chair, Loan Resolution Task Force. The Chair, Loan Resolution Task Force is delegated the following authorities, to be exercised until...

  9. 21 CFR 890.3110 - Electric positioning chair.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Electric positioning chair. 890.3110 Section 890.3110 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... positioning chair. (a) Identification. An electric positioning chair is a device with a motorized positioning...

  10. Raman Chair | About IASc | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Raman Chair. The Raman Chair was instituted in 1972 by the Government of India to commemorate the memory of the founder of the Academy, Sir C. V. Raman. Eminent scientists are invited by the Council of the Academy to occupy the Chair, for periods of between six weeks and six months. Raman Professors who have ...

  11. Space Grant Research Launches Rehabilitation Chair

    Science.gov (United States)

    2015-01-01

    Working with funding from the National Space Grant College and Fellowship Program-which was implemented by NASA Headquarters to fund research, education, and public service projects-a biomedical engineering student created a vibration-based system that could combat bone loss from prolonged trips to space. A rehabilitation chair incorporating the technology is now sold by Sheboygan, Wisconsin-based VibeTech Inc. and is helping people recover more quickly from injuries and surgery.

  12. Great auricular neuropraxia with beach chair position

    Directory of Open Access Journals (Sweden)

    Joshi M

    2017-07-01

    Full Text Available Minal Joshi,1 Ruth Cheng,2 Hattiyangadi Kamath,1 Joel Yarmush1 1Department of Anesthesiology, New York Methodist Hospital, New York, NY, USA; 2School of Medicine, St. George’s University, Grenada, West Indies Abstract: Shoulder arthroscopy has been shown to be the procedure of choice for many diagnostic and therapeutic interventions. Neuropraxia of the great auricular nerve (GAN is an uncommon complication of shoulder surgery, with the patient in the beach chair position. We report a case of great auricular neuropraxia associated with direct compression by a horseshoe headrest, used in routine positioning for uncomplicated shoulder surgery. In this case, an arthroscopic approach was taken, under regional anesthesia with sedation in the beach chair position. The GAN, a superficial branch of the cervical plexus, is vulnerable to neuropraxia due to its superficial anatomical location. We recommend that for the procedures of the beach chair position, the auricle be protected and covered with cotton and gauze to avoid direct compression and the position of the head and neck be checked and corrected frequently. Keywords: neuropraxia, anesthesia, arthroscopy, great auricular nerve

  13. "Rocking-Chair"-Type Metal Hybrid Supercapacitors.

    Science.gov (United States)

    Yoo, Hyun Deog; Han, Sang-Don; Bayliss, Ryan D; Gewirth, Andrew A; Genorio, Bostjan; Rajput, Nav Nidhi; Persson, Kristin A; Burrell, Anthony K; Cabana, Jordi

    2016-11-16

    Hybrid supercapacitors that follow a "rocking-chair"-type mechanism were developed by coupling divalent metal and activated carbon electrodes in nonaqueous electrolytes. Conventional supercapacitors require a large amount of electrolyte to provide a sufficient quantity of ions to the electrodes, due to their Daniell-type mechanism that depletes the ions from the electrolyte while charging. The alternative "rocking-chair"-type mechanism effectively enhances the energy density of supercapacitors by minimizing the necessary amount of electrolyte, because the ion is replenished from the metal anode while it is adsorbed to the cathode. Newly developed nonaqueous electrolytes for Mg and Zn electrochemistry, based on bis(trifluoromethylsulfonyl)imide (TFSI) salts, made the metal hybrid supercapacitors possible by enabling reversible deposition on the metal anodes and reversible adsorption on an activated carbon cathode. Factoring in gains through the cell design, the energy density of the metal hybrid supercapacitors is projected to be a factor of 7 higher than conventional devices thanks to both the "rocking-chair"-type mechanism that minimizes total electrolyte volume and the use of metal anodes, which have substantial merits in capacity and voltage. Self-discharge was also substantially alleviated compared to conventional supercapacitors. This concept offers a route to build supercapacitors that meet dual criteria of power and energy densities with a simple cell design.

  14. New product development: A batik multifunctional chair

    Science.gov (United States)

    Indrawati, Sri; Sukmaningsih, Nias

    2017-11-01

    The biggest challenge facing by Batik industry in ASEAN Economic Community (AEC) era is the greater number of fashion competitors both domestically and internationally. Based on that condition, the development of new product variants by considering product performance and price is needed. This research was conducted to develop batik products with a new target market. Products that being developed is batik multifunctional chair using integrated value engineering and analytic hierarchy process methods. This research has been done in several stages, ie. Information stage, creative stage, value analysis and product prototyping. The results of this research shows that the batik multifunctional chair product criteria are aesthetic (29%), multifunctional (34%) and ergonomic (37%). There are three new product design alternatives that successfully being developed. Based on value analysis, the product design alternatives that have the highest value is alternative design 2, the value is 2,37. The production cost for this design is Rp. 500.000,-. Alternative design 2 specification are using Mahoni wood, Batik parang rusak pattern with natural coloring process, can be used as table and fit with customer's body anthropometry. Then a batik multifunctional chair prototype is developed based on the best alternative design.

  15. 76 FR 19176 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2011-04-06

    ...) Maritime Safety Committee (MSC 89) to be held May 11-20, 2011. The primary matters to be considered at MSC... --Technical assistance sub-programme in maritime safety and security --Capacity-building for the... business --Report of the Maritime Safety Committee Members of the public may attend these two meetings up...

  16. 78 FR 29201 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-05-17

    ... the International Maritime Organization's (IMO) Marine Safety Committee to be held at the IMO... session of the Sub-Committee) Technical co-operation activities relating to maritime safety and security... amendments to mandatory instruments Measures to enhance maritime security Goal-based new ship construction...

  17. 77 FR 57638 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-09-18

    ... the International Maritime Organization's (IMO) Marine Safety Committee to be held at the IMO... seventeenth session of the Sub-Committee); Technical co-operation activities relating to maritime safety and... amendments to mandatory instruments; Measures to enhance maritime security; Goal-based new ship construction...

  18. 76 FR 44977 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2011-07-27

    ... international trade. --Ship/port interface. --Technical co-operation and assistance. --Relations with other... DEPARTMENT OF STATE [Public Notice 6827] Shipping Coordinating Committee; Notice of Committee... upcoming events at the International Maritime Organization (IMO) in London, United Kingdom. The first of...

  19. Radon exposure: Human health threat. Hearing before the Subcommittee on Health and the Environment of the Committee on Energy and Commerce, House of Representatives, One Hundredth Congress, First Session on H.R. 2837

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    The hearings on H.R. 2837 that amends the Toxic Substance Control Act to assist states in responding to the threat to human health posed by exposure to radon were held by the Committee on Energy and Commerce, Subcommittee on Health and Environment chaired by Hon. Henry A. Waxman. Testimony was presented by the Environmental Protection Agency Deputy Administrator and a number of other outstanding witnesses representing state governments, health organizations, homebuilders, and environmental groups. The bill is recorded in its entirety and provides for both technical and financial assistance to the states for the enactment and execution of radon testing programs

  20. Standing Concertation Committee

    CERN Multimedia

    HR Department

    2007-01-01

    ORDINARY MEETING ON 27 FEBRUARY 2007 The main items discussed at the meeting of the Standing Concertation Committee on 27 February 2007 included: Saved Leave Scheme (SLS): It was announced that a Management/Staff Association working group had been set up to discuss the Saved Leave Scheme (SLS): Members : M. Büttner, E. Chiaveri (chair), Ph. Defert, D. Klem, M. Vitasse, J.-M. Saint-Viteux. It was noted that the Staff Association was launching a questionnaire on SLS and distributed to all members of the personnel. Merit Recognition Guidelines: In the context of the new Merit Appraisal and Recognition Scheme (MARS), the committee took note of the CERN-wide 2007 Merit Recognition Guidelines, including the Frequently Asked Questions on HR Department's dedicated website. Information on CERN's medium and long-term plans (MTP-LTP)/Contract renewals/ External mobility The Committee took note of the information provided on CERN's MTP-LTP and of documentation distributed at the meeting by the Staff ...

  1. Is chair rise performance a useful measure of leg power?

    Science.gov (United States)

    Hardy, Rebecca; Cooper, Rachel; Shah, Imran; Harridge, Stephen; Guralnik, Jack; Kuh, Diana

    2010-01-01

    Chair rise performance, which is simple to assess in a home or clinic setting, has been used as a method of predicting leg power deficit in older adults. More recently, chair rise performance has been assessed in younger populations as a baseline for assessment of subsequent age-related declines in function and power. However, as rising from a chair repeatedly not only requires lower limb strength and power but also good balance and coordination, it may not be purely a measure of leg power especially among these younger, well functioning groups who are yet to experience agerelated declines and deficits in function. The aim of this study was to assess whether chair rise performance can be considered as a predictor of leg power, and hence of deficits in this, in men and women in mid-life. We assessed the relationship of chair rise performance with leg extensor power (LEP), measured using the Nottingham Power Rig (NPR), and with standing balance performance. LEP was measured in a clinic setting in a sub-sample of 81 men and 93 women from the MRC National Survey of Health and Development, a nationally representative cohort born in Britain in 1946. The time taken to rise from a chair 10 times and standing balance time were assessed during home visits at the same age. Increasing LEP was associated with better chair rise performance among those who completed 10 chair rises in ≥15 seconds, after adjustment for body size (p=0.008). Better standing balance performance was associated with better chair rise performance in men, but not women. That LEP and standing balance are both related to chair rise time in men suggests that chair rise time should not be thought of purely as a proxy measure of leg power in middle-aged populations. This has implications for longitudinal studies which want to study age-related decline in chair rise performance.

  2. Standing Concertation Committee

    CERN Multimedia

    HR Department

    2010-01-01

    Main issues examined at the meeting of 2 October 2009 The October 2009 meeting of the Standing Concertation Committee was entirely devoted to preparation of TREF’s meeting on 21-22 October. The Committee took note of, discussed and agreed on clarifications needed to some of the documents and presentations that the Management intended to submit and/or present to TREF on the following subjects: Equal opportunities The Committee took note of a preliminary report on equal opportunities at CERN drawn up by D. Chromek-Burckhart, the Equal Opportunities Officer, and T. Smith, Chairman of the Equal Opportunities Advisory Panel, containing in particular a proposal for a new process for resolving harassment conflicts. Technical analysis of the CERN Health Insurance Scheme - Actuary’s Report The Committee took note of a presentation by P. Charpentier, Chairman of the CERN Health Insurance Supervisory Board (CHIS Board), on the 2009 actuarial report on the CERN Health Insurance Scheme (CHIS). Th...

  3. Life After Being a Pathology Department Chair: Issues and Opportunities.

    Science.gov (United States)

    Bailey, David N; Lipscomb, Mary F; Gorstein, Fred; Wilkinson, David; Sanfilippo, Fred

    2016-01-01

    Although there is a considerable literature on transition of faculty members to the position of department chair, there is a dearth of publications about transitioning from the chair to other activities including retirement. The Association of Pathology Chairs senior fellows (all of whom are former chairs of academic departments of pathology) made this topic a focus of discussion at the Association of Pathology Chairs 2016 Annual Meeting. Of the 33 senior fellows engaged in this discussion, following their time as chairs, a small majority (18) transitioned to other administrative posts within or outside the university, while the others either returned to the active faculty (7) or retired (8). The motivating factors and influences for transitioning from the chair were probed along with the processes used in executing the transition, such as the development of transition plans. The reasons for selecting the specific type of postchair activity were also investigated. There was extraordinary diversity in the type of post-chair activities pursued. To our knowledge, no other medical specialty has examined these issues, which may be potentially relevant for the career planning of active chairs.

  4. Technologies for improving current and future light water reactor operation and maintenance: Development on the basis of experience. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2000-09-01

    experienced in nuclear power plant operation and maintenance. Worldwide, the average energy availability factor has increased from approximately 70 percent in 1989 to 79 percent' in 1998, with some utilities achieving significantly higher values. This is being achieved through integrated programmes, including personnel training and quality assurance, from improvements implemented in plant systems and components, and from improvements in outage duration for maintenance, refuelling, and other scheduled shutdowns, as well as forced outages. International co-operation is a key role in this success. The various programmes of the World Association of Nuclear Operators (WANO) to exchange information and encourage communication of experience, and the activities of the IAEA including projects in nuclear power plant performance assessment and feedback, effective quality management, and information exchange meetings on technology advances, are important examples of international co-operation to improve the performance of nuclear power plants. This IAEA Technical Committee meeting (TCM) was convened to provide a forum for information exchange on technologies for improving plant operation and maintenance which can contribute to enhanced economic competitiveness of LWRs, and on on-going or planned technology development expected to achieve further improvements. Information exchange of recent positive experience on development and/or implementation of technologies that have resulted in reduced operation and maintenance costs of LWRs, and information on on-going or planned activities, was strongly encouraged

  5. ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics, Three Decades of High-quality, Technically-rigorous Normalization

    Science.gov (United States)

    Jenkins, Michael G.; Salem, Jonathan A.

    2016-01-01

    Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high quality, rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards provide accurate, reliable, repeatable and complete data. Within Committee C28 users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, nearly 50 standards since the Committees founding in 1986. This paper provides a retrospective review of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of advanced ceramics standards to demonstrate their practical applications.

  6. A qualitative study of faculty members' views of women chairs.

    Science.gov (United States)

    Isaac, Carol; Griffin, Lindsay; Carnes, Molly

    2010-03-01

    Concurrent with the evolving role of the department chair in academic medicine is the entry of women physicians into chair positions. Because implicit biases that stereotypically masculine behaviors are required for effective leadership remain strong, examining faculty members' perceptions of their chair's leadership in medical school departments with women chairs can provide insight into the views of women leaders in academic medicine and the complex ways in which gender may impact these chairs' leadership style and actions. We conducted semistructured interviews with 13 male and 15 female faculty members representing all faculty tracks in three clinical departments chaired by women. Inductive, qualitative analysis of the subsequent text allowed themes to emerge across interviews. Four themes emerged regarding departmental leadership. One dealt with the leadership of the previous chair. The other three described the current chair's characteristics (tough, direct, and transparent), her use of communal actions to help support and mentor her faculty, and her ability to build power through consensus. Because all three chairs were early in their tenure, a wait and see attitude was frequently expressed. Faculty generally viewed having a woman chair as an indication of positive change, with potential individual and institutional advantages. This exploratory study suggests that the culture of academic medicine has moved beyond questioning women physicians' competence to lead once they are in top organizational leadership positions. The findings are also consonant with experimental research indicating that women leaders are most successful when they pair stereotypic male (agentic) behaviors with stereotypic female (communal) behaviors. All three chairs exhibited features of a transformational leadership style and characteristics deemed essential for effective leadership in academic medicine.

  7. Secondary School Department Chairs Leading Successful Change

    Directory of Open Access Journals (Sweden)

    Julie Ann Gaubatz

    2015-12-01

    Full Text Available A foundational understanding within education leadership literature is that education leaders are expected to guide reform efforts within school. This expectation mirrors organizational development literature that describes leaders as individuals who constructively institute change within their organizations. Although leadership and change are portrayed as codependent, no scholarship has linked change models with leadership theories. This article describes a multiple case study that explored the relationship between leadership behaviors and the change process through secondary school department chair stories of change. From this analysis, a clearer picture emerged that illustrates how leaders with little control over decisions implement change. Findings included distinct connections between CREATER change process stages and the Leadership Grid. Suggestions as to how education leaders should approach change attempts within their schools are discussed.

  8. AGU Committees

    Science.gov (United States)

    Administrative Committees are responsible for those functions required for the overall performance or well-being of AGU as an organization. These committees are Audit and Legal Affairs, Budget and Finance*, Development, Nominations*, Planning, Statutes and Bylaws*, Tellers.Operating Committees are responsible for the policy direction and operational oversight of AGU's primary programs. The Operating Committees are Education and Human Resources, Fellows*, Information Technology, International Participation*, Meetings, Public Affairs, Public Information, Publications*.

  9. Women chairs in academic medicine: engendering strategic intuition.

    Science.gov (United States)

    Isaac, Carol; Griffin, Lindsay

    2015-01-01

    Because stereotypically masculine behaviors are required for effective leadership, examining female chairs' leadership in academic medicine can provide insight into the complex ways in which gender impacts on their leadership practices. The paper aims to discuss this issue. The author interviewed three female clinical chairs and compared the findings to interviews with 28 of their faculty. Grounded theory analysis of the subsequent text gathered comprehensive, systematic, and in-depth information about this case of interest at a US top-tier academic medical center. Four of five themes from the faculty were consistent with the chair's narrative with modifications: Prior Environment (Motivated by Excellence), Tough, Direct, Transparent (Developing Trust), Communal Actions (Creating Diversity of Opinion), and Building Power through Consensus (an "Artful Exercise") with an additional theme, the Significance (and Insignificance) of a Female Chair. While faculty members were acutely aware of the chair's gender, the chairs paradoxically vacillated between gender being a "non-issue" and noting that male chairs "don't do laundry." All three female chairs in this study independently and explicitly stated that gender was not a barrier, yet intuitively used successful strategies derived from the research literature. This study suggests that while their gender was highlighted by faculty, these women dismissed gender as a "non-issue." The duality of gender for these three female leaders was both minimized and subtly affirmed.

  10. Raman Chair | About IASc | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    The Raman Chair was instituted in 1972 by the Government of India to commemorate the memory of the founder of the Academy, Sir C. V. Raman. Eminent scientists are invited by the Council of the Academy to occupy the Chair, for periods of between six weeks and six months. Raman Professors who have occupied the ...

  11. Chair with Integrated Personalized Ventilation for Minimizing Cross Infection

    DEFF Research Database (Denmark)

    Nielsen, Peter V.; Bartholomaeussen, Niels Møller; Jakubowska, Ewa

    2007-01-01

    and a chair with a supply surface have been tested. Very high protection can be obtained by the chair with integrated diffuser. An effectiveness up to 95% can be reached, and the different systems have in general an effectiveness larger than 50% to 80%. The flow rate to the system should be at a level of 10 l...

  12. The Hot Seat: Profiling the Marketing Department Chair

    Science.gov (United States)

    Aggarwal, Praveen; Rochford, Linda; Vaidyanathan, Rajiv

    2009-01-01

    The chair of the marketing department serves a critical role in balancing the needs of the university with those of the faculty. Because most department chairs are drawn from the faculty in their departments, the administrative role they take on conflicts with their desire to maintain their academic roles as teacher and researcher. Although there…

  13. Reflections in the Rearview Mirror of a Departing Board Chair

    Science.gov (United States)

    Di Prisco, Joseph

    2010-01-01

    This article shares reflections in the rearview mirror of a departing board chair. The author has served seven years as board chair of Redwood Day School (California). As he departs, he figures out a few things that might be worth sharing. The author shares his responses to some Frequently Unasked Questions.

  14. Perceptions of Interior Design Program Chairs Regarding Credentials for Faculty

    Science.gov (United States)

    Miller, Beth R.

    2017-01-01

    The purpose of this study was to determine whether program chairs in interior design have a preferred degree credential for candidates seeking a full-time, tenure-track position or other full-time position at their institution and to determine if there is a correlation between this preference and the program chair's university's demographics,…

  15. The Future Competencies of Department Chairs: A Human Resources Perspective

    Science.gov (United States)

    Jones, Faye R.

    2011-01-01

    This exploratory study of department chairs, deans, and faculty at extensive research public universities in Florida resulted in the identification of 85 future competencies of department chairs using a human resources perspective. Results include a discussion of the top 20 most important competencies and the top 20 competencies anticipated to be…

  16. Department Chairs' Perceptions of the Importance of Business Communication Skills.

    Science.gov (United States)

    Wardrope, William J.

    2002-01-01

    Determines business department chairs' ratings of topics typically covered in the business communication course. Indicates that department chairs perceive writing skills to be more important to business communication courses than other communication skills, such as speaking, technology-mediated communication, interpersonal communication,…

  17. Highlight: Research Chair unites four West African universities in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-14

    Apr 14, 2016 ... Local and regional experts including researchers, consultants, and academics convened in Cotonou, Benin, on February 26, 2015 to launch a Research Chair on EcoHealth. The Chair unites four West African universities that have pledged to reduce air pollution and non-communicable respiratory ...

  18. The Strategic Value of Succession Planning for Department Chairs.

    Science.gov (United States)

    Rayburn, William; Grigsby, Kevin; Brubaker, Linda

    2016-04-01

    Most faculty who aspire to be department chairs are unaware of succession processes at their institution. This Commentary highlights the importance of succession planning, emphasizing the general need for transparency. Succession planning provides institutional leaders the opportunity to optimize, renew, and revitalize their organization by ensuring successful leadership transitions. In contrast to leadership pathways in the military, corporate business, and hospital administration, planned succession of medical school department chairs has received little attention. Different approaches to succession planning are essential for emergency and planned transitions. Emergency succession plans should be in place at all times, regularly revisited, and modified as needed. Department chairs should begin considering their planned succession between one and five years after their initial appointment. The succession discussion between a chair and medical school dean requires cautious, thoughtful, and open discussions. Intradepartmental annual faculty performance evaluations permit the chair to mentor potential successors in acquiring future-oriented, institution-based leadership qualities necessary to be considered for a future department chair position. If health and time permit, the successful chair should remain in his or her current position until a successor is named or, preferably, is in place. Appointment of an interim chair as part of succession planning can be useful for on-the-job training of an internal candidate, yet awkwardness might ensue if there is more than one internal candidate.Succession development offers the great advantage of maintaining smooth organizational performance while optimizing talent management and exploring opportunities for transitioning individuals into leadership roles.

  19. Turnover of First-Time Chairs in Departments of Psychiatry

    Science.gov (United States)

    Buckley, Peter F.; Rayburn, William F.

    2011-01-01

    Objective: The authors examine the tenure of first-time Chairs in academic departments of psychiatry in order to stimulate discussion on extant workforce and leadership issues. Method: Data on tenure of Chairs in psychiatry and other nonsurgical specialties were derived from the longitudinal database of the Association of American Medical Colleges…

  20. Academy – Springer Nature chair | About IASc | Indian Academy of ...

    Indian Academy of Sciences (India)

    Academy – Springer Nature Chair. Academy – Springer Nature chair. Background. The Indian Academy of Sciences and Springer mutually agreed to co-publish the Academy's ten journals and executed an agreement in the year 2006. To enhance the scope of its activities, the Academy formed the Academy Trust (tAcT), ...

  1. Pediatric dental chair vs. traditional dental chair: A pediatric dentist′s poll

    OpenAIRE

    Khushboo Barjatya; Ankur Vatsal; Halaswamy V Kambalimath; Vinay Kumar Kulkarni; Naveen Banda Reddy

    2015-01-01

    Objective: Proper positioning of the child patient, can not only have positive ramifications for the operator′s posture, comfort, and career longevity - it can also lead to better treatment and increased productivity. The aim of the survey questionnaire was to assess the utilization, need, and attitude concerning dental chairs among pediatric dentist while working on and managing the child patient. Study Design: The questions were structured using adobe forms central online software, regardin...

  2. Electromyography comparison of normal chair-desk system and assistant chair-desk system on fatigue.

    Science.gov (United States)

    Kwon, Moon-Seok; Lee, Sang-Ho; Cho, Ik-Rae; Won, Yu-Mi; Han, Mi-Kyung; Jung, Kon-Nym; Lee, Jae-Hee; Chin, Ji-Hyoung; Rho, Jae-Hun; Kim, Ju-Yeon; Yang, Jae-Bong; No, Jae-Kui; Park, Tae-Geun; Lee, Taek-Kyun; Park, Hyo-Joo; Lee, Sam-Jun; Yoo, Kyoung-Seok; Kang, Suh-Jung; Kwon, Se-Jeong; Shin, Mi-Ae; Kim, Hu-Nyun; Kahn, Hyung-Sik; Kim, Min-Jung; Kim, Tae-Young

    2015-10-01

    [Purpose] This study was designed to test the effects of the Assistant Chair-Desk System (ACDS), which can reduce the forward tilt of the neck and trunk and the level of fatigue during long lasting study in the sitting position. [Subjects] Fourteen middle school students and 14 college students of mixed gender participated in this study. [Methods] Fatigue level, the trapezius muscle, and the forward tilt angle of the head and trunk as well as distance factors were assessed before after using a normal chair-desk system (NCDS) and the ACDS for 120 minutes. [Results] There was an interaction effect in the angle and length of the neck from the sitting posture changes after 2 hours of studying using the NCDS and ACDS. There were also significant differences in the fatigue levels, hip joint angles and the lengths from the head according to the main effects of the chair-systems. [Conclusion] The studying position while using the ACDS was determined to prevent significant fatigue levels of the muscle and body, provide support to the head, by limiting the forward movement of the neck, and prevent forward tilt of the neck and trunk, by enabling the target point and gaze to be closer to the horizontal direction.

  3. COMMITTEES: LISA 7 Science Organizing Committee and Local Organizing Committee LISA 7 Science Organizing Committee and Local Organizing Committee

    Science.gov (United States)

    2009-05-01

    Science Organising Committee (SOC) Pierre Binetruy, APC - College de France Massimo Cerdonio, University of Padova Karsten Danzmann, AEI/University of Hannover Mike Cruise, University of Birmingham Jim Hough, University of Glasgow Oliver Jennrich, ESTEC Philippe Jetzer, University Zurich Alberto Lobo (Chair), ICE-CSIC and IEEC Yannick Mellier, IAP, Paris Bernard Schutz, AEI Potsdam Tim Sumner, Imperial College, London Jean-Yves Vinet, OCA, Nice Stefano Vitale, University of Trento Peter Bender, University of Colorado Sasha Buchman, Stanford University Joan Centrella, NASA/Goddard Neil Cornish, Montana State University Curt Cutler, NASA/JPL Sam Finn, Penn State University Jens Gundlach, NPL Craig Hogan, University of Washington Scott Hughes, MIT Piero Madau, Lick Observatory Tom Prince, NASA/JPL Sterl Phinney, Caltech Doug Richstone, University of Michigan Tuck Stebbins, NASA/Goddard Kip Thorne, Caltech Roger Blandford, Stanford University Eugenio Coccia, University of Roma-2 Carlos F Sopuerta,ICE-CSIC and IEEC Enrique Garcia-Berro, Universitat Politècnica de Catalunya, Barcelona Seiji Kawamura, National Observatory, Japan Jay Marx, LIGO Laboratory Stephen Merkowitz, NASA/Goddard Benoit Mours, Laboratoire d'Annec Gijs Nelemans, IMAPP, Nijmegen Enric Verdaguer, University of Barcelona Clifford M Will, Washington University, St Louis Local Organising Committee (LOC) Anna Bertolín (IEEC) Priscilla Cañizares (ICE-CSIC and IEEC) Carlos F Sopuerta (ICE-CSIC and IEEC) Ivan Lloro (ICE-CSIC and IEEC),Chair Alberto Lobo (ICE-CSIC and IEEC) Nacho Mateos (ICE-CSIC and IEEC) Pilar Montes (IEEC) Miquel Nofrarias (IEEC) Juan Ramos-Castro (Universitat Politècnica de Catalunya) Josep Sanjuán (IEEC)

  4. RILEM technical committee 195-DTD recommendation for test methods for AD and TD of early age concrete Round Robin documentation report : program, test results and statistical evaluation

    CERN Document Server

    Bjøntegaard, Øyvind; Krauss, Matias; Budelmann, Harald

    2015-01-01

    This report presents the Round-Robin (RR) program and test results including a statistical evaluation of the RILEM TC195-DTD committee named “Recommendation for test methods for autogenous deformation (AD) and thermal dilation (TD) of early age concrete”. The task of the committee was to investigate the linear test set-up for AD and TD measurements (Dilation Rigs) in the period from setting to the end of the hardening phase some weeks after. These are the stress-inducing deformations in a hardening concrete structure subjected to restraint conditions. The main task was to carry out an RR program on testing of AD of one concrete at 20 °C isothermal conditions in Dilation Rigs. The concrete part materials were distributed to 10 laboratories (Canada, Denmark, France, Germany, Japan, The Netherlands, Norway, Sweden and USA), and in total 30 tests on AD were carried out. Some supporting tests were also performed, as well as a smaller RR on cement paste. The committee has worked out a test procedure recommenda...

  5. DOE Chair of Excellence Professorship in Environmental Disciplines

    Energy Technology Data Exchange (ETDEWEB)

    Shoou-Yuh Chang

    2013-01-31

    The United States (US) nuclear weapons program during the Cold War left a legacy of radioactive, hazardous, chemical wastes and facilities that may seriously harm the environment and people even today. Widespread public concern about the environmental pollution has created an extraordinary demand for the treatment and disposal of wastes in a manner to protect the public health and safety. The pollution abatement and environmental protection require an understanding of technical, regulatory, economic, permitting, institutional, and public policy issues. Scientists and engineers have a major role in this national effort to clean our environment, especially in developing alternative solutions and evaluation criteria and designing the necessary facilities to implement the solutions. The objective of the DOE Chair of Excellence project is to develop a high quality educational and research program in environmental engineering at North Carolina A&T State University (A&T). This project aims to increase the number of graduate and undergraduate students trained in environmental areas while developing a faculty concentrated in environmental education and research. Although A&T had a well developed environmental program prior to the Massie Chair grant, A&T's goal is to become a model of excellence in environmental engineering through the program's support. The program will provide a catalyst to enhance collaboration of faculty and students among various engineering departments to work together in a focus research area. The collaboration will be expanded to other programs at A&T. The past research focus areas include: hazardous and radioactive waste treatment and disposal fate and transport of hazardous chemicals in the environment innovative technologies for hazardous waste site remediation pollution prevention Starting from 2005, the new research focus was in the improvement of accuracy for radioactive contaminant transport models by ensemble based data assimilation

  6. 75 FR 32229 - Advisory Committee on the Records of Congress

    Science.gov (United States)

    2010-06-07

    .... (2) Recognition of Co-chair--Secretary of the Senate. (3) Recognition of the Archivist of the United States. (4) Approval of the minutes of the last meeting. (5) Discussion of on-going projects and... business. The meeting is open to the public. Dated: May 26, 2010. Mary Ann Hadyka, Committee Management...

  7. COMMITTEES: Quark Matter 2008 Organising and International Advisory Committees

    Science.gov (United States)

    2008-10-01

    Organising Committee Madan M Aggarwal (Chandigarh) Jan-e Alam (Kolkata) Convener Arup Bandyopadhyay (Kolkata) Debades Bandyopadhyay (Kolkata) Rahul Basu (Chennai) Rakesh K Bhandari (Kolkata) Anju Bhasin (Jammu) Subhasis Chattopadhyay (Kolkata) Convener Sukalyan Chattopadhyay (Kolkata) Asis Chaudhuri (Kolkata) Premomoy Ghosh (Kolkata) Sanjay Ghosh (Kolkata) Sourendu Gupta (Mumbai) Muhammad Irfan (Aligarh) Durga P Mahapatra (Bhubaneswar) DAmruta Mishra (New Delhi) Ajit K Mohanty (Mumbai) Bedangadas Mohanty (Kolkata) Vaisali Naik (Kolkata) Tapan K Nayak (Kolkata) Convener Sudhir Raniwala (Jaipur) Sourav Sarkar (Kolkata) Bikash Sinha (Kolkata) Chair Dinesh Srivastava (Kolkata) Raghava Varma (Mumbai) Yogendra P Viyogi (Bhubaneswar)Co-chair International Advisory Committee R Aymar,Switzerland Jean Paul Blaizot, France Peter Braun Münzinger, Germany Igor M Dremin, Russia Kari Eskola, Finland Jens Jorgen Gaardhoje,Denmark Rajiv V Gavai, India Hans-Ake Gustaffson, Sweden Hans Gutbrod, Germany Miklos Gyulassy, USA Timothy Hallman, USA Hideki Hamagaki, Japan Tetsuo Hatsuda, Japan Huan-Zhong Huang, USA Barbara Jacak, USA Peter Jenni, Switzerland Taka Kajino, Japan Takeshi Kodama, Brazil T D Lee, USA Peter Levai, Hungary Luciano Maiani, Italy Larry McLerran, USA Berndt Müller, USA Guy Paic, Mexico Sibaji Raha, India Lodovico Riccati, Italy Hans Georg Ritter, USA Helmut Satz, Germany Jurgen Schukraft, Switzerland Yves Schutz, France Edward V Shuryak, USA Johanna Stachel, Germany Horst Stöcker, Germany Itzhak Tserruya, Israel Xin-Nian Wang, USA Bolek Wyslouch, USA Glenn R Young, USA William A Zajc, USA Wen-Long Zhan, China

  8. Sitting into the limelight: Lonely Chairs at CERN turns one

    CERN Multimedia

    Katarina Anthony

    2015-01-01

    A picture may be worth a thousand words - but a picture of a chair? It’s worth a story all by itself. Over the past year, the "Lonely Chairs at CERN" photography blog has let the chairs do the talking. Along the way, these chairs have inspired and enchanted people across the globe with their honest depiction of the Laboratory.   This lonely chair outside Building 32 was one of the first Rebeca photographed. When CMS physicist Rebeca Gonzalez Suarez created Lonely Chairs at CERN back in April 2014, she was not expecting the immediate reaction it garnered. Within days, the blog had picked up thousands of followers and was featured in Gizmodo and The Guardian. "The response inside CERN was very positive, but the response outside was overwhelming," says Rebeca. "I’ve got a lot of followers who are really into science and are very excited about CERN. They comment about wanting to work here - sometimes on the ugliest chair I&rsqu...

  9. Efficacy of cardiopulmonary resuscitation performed in a dental chair.

    Science.gov (United States)

    Lepere, A J; Finn, J; Jacobs, I

    2003-12-01

    Within the dental setting, historically there has been some concern as to whether cardiopulmonary resuscitation (CPR) can be performed effectively in the dental chair. This study tested the hypothesis that there is no difference in the efficacy of CPR performed in the dental chair or on the floor. Four cycles of two-person CPR were performed by three health professionals on a manikin positioned alternately on the floor and in a dental chair. Ventilation was performed using a Laerdal pocket mask, without oxygen supplementation. Compression and ventilation performance was recorded using a computerized manikin skill meter. Each of the participants was able to achieve a mean cardiac compression depth of between 41 and 50cm, irrespective of the CPR surface. The only statistically significant difference found in expired air resuscitation (EAR) and external cardiac compression performance was that 37 per cent of ventilations performed on the floor were deemed to be too shallow, compared to only 15 per cent in the dental chair (p=0.001). It is possible for those trained in basic life support to perform CPR effectively in the dental chair. Each of the participants agreed that CPR, in particular EAR, was easier to perform when the manikin was in the dental chair compared with the floor. Dentists are encourage to regularly update their CPR knowledge and skills, including the practice of CPR in the dental chair.

  10. Burnout in United States Academic Chairs of Radiation Oncology Programs

    Energy Technology Data Exchange (ETDEWEB)

    Kusano, Aaron S. [Department of Radiation Oncology, University of Washington School of Medicine, Seattle, Washington (United States); Thomas, Charles R., E-mail: thomasch@ohsu.edu [Department of Radiation Medicine, Knight Cancer Institute/Oregon Health and Science University, Portland, Oregon (United States); Bonner, James A. [Department of Radiation Oncology, University of Alabama at Birmingham, Birmingham, Alabama (United States); DeWeese, Theodore L. [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins Medical Institutions, Baltimore, Maryland (United States); Formenti, Silvia C. [Department of Radiation Oncology, New York University, New York, New York (United States); Hahn, Stephen M. [Department of Radiation Oncology, Perelman School of Medicine at the University of Pennsylvania, Philadelphia, Pennsylvania (United States); Lawrence, Theodore S. [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan (United States); Mittal, Bharat B. [Department of Radiation Oncology, Northwestern University, Chicago, Ilinois (United States)

    2014-02-01

    Purpose: The aims of this study were to determine the self-reported prevalence of burnout in chairs of academic radiation oncology departments, to identify factors contributing to burnout, and to compare the prevalence of burnout with that seen in other academic chair groups. Methods and Materials: An anonymous online survey was administered to the membership of the Society of Chairs of Academic Radiation Oncology Programs (SCAROP). Burnout was measured with the Maslach Burnout Inventory-Human Services Survey (MBI-HSS). Results: Questionnaires were returned from 66 of 87 chairs (76% response rate). Seventy-nine percent of respondents reported satisfaction with their current positions. Common major stressors were budget deficits and human resource issues. One-quarter of chairs reported that it was at least moderately likely that they would step down in the next 1 to 2 years; these individuals demonstrated significantly higher emotional exhaustion. Twenty-five percent of respondents met the MBI-HSS criteria for low burnout, 75% for moderate burnout, and none for high burnout. Group MBI-HSS subscale scores demonstrated a pattern of moderate emotional exhaustion, low depersonalization, and moderate personal accomplishment, comparing favorably with other specialties. Conclusions: This is the first study of burnout in radiation oncology chairs with a high response rate and using a validated psychometric tool. Radiation oncology chairs share similar major stressors to other chair groups, but they demonstrate relatively high job satisfaction and lower burnout. Emotional exhaustion may contribute to the anticipated turnover in coming years. Further efforts addressing individual and institutional factors associated with burnout may improve the relationship with work of chairs and other department members.

  11. Burnout in United States Academic Chairs of Radiation Oncology Programs

    International Nuclear Information System (INIS)

    Kusano, Aaron S.; Thomas, Charles R.; Bonner, James A.; DeWeese, Theodore L.; Formenti, Silvia C.; Hahn, Stephen M.; Lawrence, Theodore S.; Mittal, Bharat B.

    2014-01-01

    Purpose: The aims of this study were to determine the self-reported prevalence of burnout in chairs of academic radiation oncology departments, to identify factors contributing to burnout, and to compare the prevalence of burnout with that seen in other academic chair groups. Methods and Materials: An anonymous online survey was administered to the membership of the Society of Chairs of Academic Radiation Oncology Programs (SCAROP). Burnout was measured with the Maslach Burnout Inventory-Human Services Survey (MBI-HSS). Results: Questionnaires were returned from 66 of 87 chairs (76% response rate). Seventy-nine percent of respondents reported satisfaction with their current positions. Common major stressors were budget deficits and human resource issues. One-quarter of chairs reported that it was at least moderately likely that they would step down in the next 1 to 2 years; these individuals demonstrated significantly higher emotional exhaustion. Twenty-five percent of respondents met the MBI-HSS criteria for low burnout, 75% for moderate burnout, and none for high burnout. Group MBI-HSS subscale scores demonstrated a pattern of moderate emotional exhaustion, low depersonalization, and moderate personal accomplishment, comparing favorably with other specialties. Conclusions: This is the first study of burnout in radiation oncology chairs with a high response rate and using a validated psychometric tool. Radiation oncology chairs share similar major stressors to other chair groups, but they demonstrate relatively high job satisfaction and lower burnout. Emotional exhaustion may contribute to the anticipated turnover in coming years. Further efforts addressing individual and institutional factors associated with burnout may improve the relationship with work of chairs and other department members

  12. Cranial nerves neuropraxia after shoulder arthroscopy in beach chair position.

    Science.gov (United States)

    Cogan, A; Boyer, P; Soubeyrand, M; Hamida, F Ben; Vannier, J-L; Massin, P

    2011-05-01

    We report a case of neuropraxia of the 9th, 10th and 12th cranial nerve pairs after arthroscopic rotator cuff repair in the beach chair position. The elements in the medical file seem to exclude an intracranial cause of the lesions and support a mechanical, extracranial cause due to intubation and/or the beach chair position. This clinical case report shows the neurological risks of the beach chair position during arthroscopic shoulder surgery and presents the essential safety measures to prevent these risks. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

  13. Overview (this manuscript is an overview of an ASTM symposium. The authors, John Sebroski and Mark Mason, of the overview were the co-chairs of the symposium and co-editors of the manuscripts submitted for ASTM peer review and subsequent publication in the technical proceedings for the symposium)

    Science.gov (United States)

    The Symposium on Developing Consensus Standards for Measuring Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation was held on April 30th and May 1, 2015. Sponsored by ASTM Committee D22 on Air Quality, the symposium was held in Anaheim, CA, in conjunction with the st...

  14. The influence of chair seat height on the performance of community-dwelling older adults' 30-second chair stand test.

    Science.gov (United States)

    Kuo, Yi-Liang

    2013-06-01

    Although chair seat height affects the performance of sit-to-stand movement, no previous study has examined the influence of chair seat height on the 30-second chair stand test (CST). Fifty-five community-dwelling older adults (age 70.0 ± 6.3 years) performed the test from the standard height of 43 cm and then from five randomly ordered seat heights from 80 to 120 % of each participant's lower leg length. Chair seat height significantly influences the performance of community-dwelling older adults' 30-s CST (F = 57.50, p  0.95) and between the standard and 90 % conditions (p = 0.353). When comparing the scores between the randomly ordered chair seat heights, all comparisons were significantly different (p Chair seat height's relation to the lower leg length should be considered when interpreting 30-s CST scores. Additionally, it is necessary to optimize the chair seat height when using the 30-s CST as an outcome measure for exercise intervention or to screen for people with weaker lower extremities.

  15. Cycling chair: a novel vehicle for the lower limbs disabled

    Science.gov (United States)

    Takahashi, Takayuki; Nishiyyama, Yuuki; Ozawa, Yukiko; Nakano, Eiji; Handa, Yasunobu

    2005-12-01

    The goal of our research is to develop a practical vehicle for lower limbs disabled to improve their mobility and health. The most significant mechanical character of the proposed vehicle is that it is driven by the lower limbs of the disabled themselves. We call it as Cycling Chair. Disuse of the lower limbs leads many subsidiary issues on health, deteriorating the whole-body circulation, it is the most serious problem, cases so-called the disuse syndrome. The proposed Cycling Chair solves those problems by using the leg-driven mechanism. In this paper, the mechanism of the Cycling Chair and the way to drive the chair by paraplegics are discussed. Some experimental results are also presented.

  16. "Piekara's Chair": Mechanical Model for Atomic Energy Levels.

    Science.gov (United States)

    Golab-Meyer, Zofia

    1991-01-01

    Uses the teaching method of models or analogies, specifically the model called "Piekara's chair," to show how teaching classical mechanics can familiarize students with the notion of energy levels in atomic physics. (MDH)

  17. Highlight: Kenya selects first research chair on health systems ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    NACOSTI), in collaboration with IDRC, launched Kenya's first Research Chair ... like many other African countries, suffers brain drain as professionals seek better remuneration and research facilities as well as funding opportunities ...

  18. Introductory statement at the Technical Assistance and Co-operation Committee of the Board of Governors. Vienna, 17 November 2003 [As delivered

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2003-01-01

    The IAEA's technical co-operation (TC) programme is focused on putting advanced science to work to meet the economic and social needs of developing countries. The TC planning process is briefly discussed, including recent evaluation results; highlighting of a number of key activities; and reviewing the current status of TC implementation and funding. The areas of activity include: The use of radiotherapy in cancer treatment; isotope hydrology; monitoring coastal and marine environment; plant breeding applications. Program implementation as well as program funding is discussed. The Agency is also working to reinforce technical co-operation among developing countries (TCDC), that is, the pooling of resources and expertise in areas of mutual benefit. It is stated that the TC programme has become a powerful tool for transferring nuclear science and technology to developing countries. But only if we work together in partnership can we ensure the success of the programme. I look forward to the continuation and further development of that partnership

  19. Thirty-Ninth Annual Report of the National Advisory Committee for Aeronautics: Administrative Report Including Technical Reports Nos. 1111 to 1157

    Science.gov (United States)

    1955-01-01

    This is the fiftieth year since Wilbur and Orville Wright at Kitty Hawk N. C., made their powered flight. That airplane was a fragile and unsteady machine of no immediate utility. It flew for only a minute but it disclosed the solution of the age-old problem of human flight. The Wrights were the first in the history of man to fly. There was no one to teach them. They had to discover principles and to learn the art by cautious and methodical experimenting. From their own research they obtained the practical information needed to design their successful flying machine. The Wrights received no effective aid from the theoretical studies of flight made by the mathematicians of the nineteenth century. The science of aerodynamics was developed in response to the practical demands of aeronautics in the years to follow. In 1908, the Wrights demonstrated at Fort Myer, Va., a vastly improved flyer, the first military airplane. It carried a passenger and flew for more than an hour. Following this public demonstration, the development of the airplane was taken up vigorously. At first France and Germany took the lead, then Great Britain, but the United States lagged behind in the furthering of this greatest American development of the century. With war clouds in view in 1915, the Congress established the National Advisory Committee for Aeronautics to undertake the scientific study of the problems of fight with a view to their practical solution. President Wilson appointed the members of the first Committee, consisting of the heads of the military and civil agencies of the Government concerned with aeronautics and experts from private life.

  20. Colloquium on the Past, Present and Future of the Nuclear Law Committee

    International Nuclear Information System (INIS)

    Echavarri, Luis; Schwartz, Julia; Dussart-Desart, Roland; Pelzer, Norbert; Leger, Marc

    2007-01-01

    The NEA Nuclear Law Committee (NLC) celebrated its 50. anniversary in February 2007. To mark the occasion, a colloquium was organised on 6 February 2007 in conjunction with the committee's regular meeting in Paris, France. Those attending included nearly all former NLC chairs and former heads of NEA Legal Affairs. This document brings together the available presentations given at this colloquium: 1 - Welcoming Address (Luis Echavarri); 2 - The Nuclear Law Committee - A Historical Perspective (Julia Schwartz); 3 - The NEA Nuclear Law Committee - From the Viewpoint of a Committee Member (Norbert Pelze); 4 - Memorable Moments from Special guests; 5 - The Prospects for Nuclear Law (Marc Leger); 6 - Concluding Remarks (Roland Dussart-Desart)

  1. Panel Discussion : Report of the APS Ad-Hoc Committee on LGBT Issues

    Science.gov (United States)

    Atherton, Tim; Barthelemy, Ramon; Garmon, Savannah; Reeves, Kyle; APS Ad-Hoc Committee on LGBT Issues Team

    Following the presentation of the findings and recommendations of the APS Ad-Hoc Committee on LGBT Issues (C-LGBT) by Committee Chair Michael Falk, a panel discussion will be held featuring several members of the committee. The discussion will focus on how APS can best ensure the recommendations of the committee are carried out in a timely fashion and other ideas on future APS efforts toward LGBT inclusion in physics. Discussion topics will also include the research and other input that shaped the committee's findings and recommendations.

  2. Comparison of four specific dynamic office chairs with a conventional office chair: Impact upon muscle activation, physical activity and posture

    NARCIS (Netherlands)

    Ellegast, R.P.; Kraft, K.; Groenesteijn, L.; Krause, F.; Berger, H.; Vink, P.

    2012-01-01

    Prolonged and static sitting postures provoke physical inactivity at VDU workplaces and are therefore discussed as risk factors for the musculoskeletal system. Manufacturers have designed specific dynamic office chairs featuring structural elements which promote dynamic sitting and therefore

  3. 10 CFR 1023.5 - Duties and responsibilities of the Chair.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Duties and responsibilities of the Chair. 1023.5 Section..., Functions and Authorities § 1023.5 Duties and responsibilities of the Chair. The Chair shall be responsible... a majority of the members of the Board shall establish; (g) Designating an acting chair during the...

  4. THE 30-S CHAIR STAND TEST AND HABITUAL MOBILITY PREDICT REHABILITATION NEEDS AFTER ACUTE ADMISSION

    DEFF Research Database (Denmark)

    Hansen Bruun, Inge; Nørgaard, Birgitte; Backer Mogensen, Christian

    2016-01-01

    a need for post discharge rehabilitation. Until now screening-tools have been based on self-reported information; a challenge as elderly might be confused or unrealistic about their physical abilities. Ethics approval The Regional Scientific Ethical Committees for Southern Denmark has decided......Relevance: Responding to Changing Population Needs. The elderly population is growing and represents an increasing proportion of elderly admitted to a short stay unit in an emergency department (ED). One month after admission a fifth of the elderly patients have low physical ability and therefore...... that no approval is needed. Purpose The study aimed to evaluate if the 30 Second Chair Stand test (30s-CST) combined with other variables was able to predict rehabilitation needs among acutely admitted elderly patient. Low physical ability were defined as a 30s-CST–score ≤ 8 one month after admission...

  5. Editorial: Conference Comments by the General Chair

    Science.gov (United States)

    LaBel, Ken

    2012-12-01

    An overview is presented of the 49th Annual International Nuclear and Space Radiation Effects Conference (NSREC), held July 16-20, 2012 at the InterContinental Hotel in downtown Miami, Florida, USA. The 2012 Conference followed previous editions as an international radiation effects on electronics, materials, and systems showcase. The conference was sponsored by the Radiation Effects Committee of the IEEE Nuclear and Plasma Sciences Society. In addition, NSREC was supported by a cadre of government agencies and industry members. The 2012 edition of the conference was attended by 607 members of the radiation effects community. Of this number, 118 non-US attendees participated from 20 different countries with particularly strong attendance from France, United Kingdom, Japan, Canada, and Germany. Total attendance including exhibitors and guests was 802 people.

  6. Pump Management Committees and sustainable community water ...

    African Journals Online (AJOL)

    PMCs), technically known as Water and Sanitation Committees (WATSAN) in the water sector, are institutionalized organs for community water management. A survey of twenty-seven (27) of these institutions in six districts across the Upper ...

  7. 76 FR 40804 - Technical Amendment to the Authorization Validated End-User Regulations of the Export...

    Science.gov (United States)

    2011-07-12

    ..., No. 18 Hongda Beilu Beijing Economic & Technological Development Area, Beijing, China 100176. [[Page.... FOR FURTHER INFORMATION CONTACT: Karen Nies-Vogel, Chair, End-User Review Committee, Bureau of... EAR. The End-User Review Committee (ERC), composed of representatives from the Departments of State...

  8. 78 FR 76599 - Nuclear Energy Advisory Committee

    Science.gov (United States)

    2013-12-18

    ... DEPARTMENT OF ENERGY Nuclear Energy Advisory Committee AGENCY: Office of Nuclear Energy..., General Services Administration, notice is hereby given that the Nuclear Energy Advisory Committee (NEAC... to the Department of Energy's Office of Nuclear Energy on complex science and technical issues that...

  9. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2005-02-25

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database.

  10. Does a prototype 'Experimental' chair facilitate more postural changes in computing adolescents compared to a normal school chair?

    Science.gov (United States)

    van Niekerk, Sjan-Mari; Louw, Quinette Abegail; Grimmer, Karen

    2016-09-27

    Prolonged sitting, such as when computing, has been linked to adolescent spinal pain. A chair should fit the user's body dimensions and aid the user in frequently changing sitting posture, rather than support one 'ideal' posture. Such a chair is not currently available to high school learners. To develop a novel experimental school chair. To determine whether the experimental chair encourages regular small range movement in all directions whilst students work at computers in class. To compare the number of postural changes between the normal static school chair and the experimental chair, whilst students do computing work. A development and validation study was conducted. Twelve high school students were randomly selected from a conveniently selected school. Fifteen minutes of 3D posture measurements were collected in both the prototype and school computer chair. The analysis focused on the frequency of postural movement. Data of eleven learners were analysed. There were statistically significant increases in the number of postural changes on the 'Experimental' chair compared to the school chair, for both pelvic side-flexion and pelvic rotation (ρ= 0.01). The experimental chair provided more postural movements when compared to the school computer chair. Future studies should use this experimental chair to determine the effect of increased postural movement, of especially the pelvis, on the prevalence and intensity of musculoskeletal symptoms of high school learners in the Cape Metropole area, Western Cape, South Africa.

  11. Classroom furniture design--correlation of pupil and chair dimensions.

    Science.gov (United States)

    Domljan, Danijela; Grbac, Ivica; Hadina, Julijana

    2008-03-01

    The present study aimed at determining the relationship of anthropometric dimensions of pupils from grades 1 to 8 in primary school with the dimensions of school chairs. Two dimensions of the chairs in daily use were evaluated to ascertain whether the fit is sufficient and the effect on pupils' sitting posture. The work included a sample of 556 pupils from three primary schools in Zagreb, Croatia and two types of furniture. Dimensions of school chairs were compared with three anthropometric variables of the pupils. Descriptive statistics were analysed for all variables. These study results have shown that furniture of appropriate dimensions is not available to a large number of students in Croatia. Currently supplied classroom equipment is provided in only two sizes and does not fit the users. It is recommended that task chairs may be acceptable if they are issued in four heights or individually adjustable chairs be introduced in Croatian schools. Furthermore it is strongly recommended that schools actively promote appropriate active sitting behaviour.

  12. Influence of Chair Vibrations on Indoor Sonic Boom Annoyance

    Science.gov (United States)

    Rathsam, Jonathan; Klos, Jacob; Loubeau, Alexandra

    2015-01-01

    One goal of NASA’s Commercial Supersonic Technology Project is to identify candidate noise metrics suitable for regulating quiet sonic boom aircraft. A suitable metric must consider the short duration and pronounced low frequency content of sonic booms. For indoor listeners, rattle and creaking sounds and floor and chair vibrations may also be important. The current study examined the effect of such vibrations on the annoyance of test subjects seated indoors. The study involved two chairs exposed to nearly identical acoustic levels: one placed directly on the floor, and the other isolated from floor vibrations by pneumatic elastomeric mounts. All subjects experienced both chairs, sitting in one chair for the first half of the experiment and the other chair for the remaining half. Each half of the experiment consisted of 80 impulsive noises played at the exterior of the sonic boom simulator. When all annoyance ratings were analyzed together there appeared to be no difference in mean annoyance with isolation condition. When the apparent effect of transfer bias was removed, a subtle but measurable effect of vibration on annoyance was identified.

  13. Women chairs in academic medicine: engendering strategic intuition

    Science.gov (United States)

    Isaac, Carol; Griffin, Lindsay

    2017-01-01

    Purpose Because stereotypically masculine behaviors are required for effective leadership, examining female chairs’ leadership in academic medicine can provide insight into the complex ways in which gender impacts on their leadership practices. The paper aims to discuss this issue. Design/methodology/approach The author interviewed three female clinical chairs and compared the findings to interviews with 28 of their faculty. Grounded theory analysis of the subsequent text gathered comprehensive, systematic, and in-depth information about this case of interest at a US top-tier academic medical center. Findings Four of five themes from the faculty were consistent with the chair’s narrative with modifications: Prior Environment (Motivated by Excellence), Tough, Direct, Transparent (Developing Trust), Communal Actions (Creating Diversity of Opinion), and Building Power through Consensus (an “Artful Exercise”) with an additional theme, the Significance (and Insignificance) of a Female Chair. While faculty members were acutely aware of the chair’s gender, the chairs paradoxically vacillated between gender being a “non-issue” and noting that male chairs “don’t do laundry.” All three female chairs in this study independently and explicitly stated that gender was not a barrier, yet intuitively used successful strategies derived from the research literature. Originality/value This study suggests that while their gender was highlighted by faculty, these women dismissed gender as a “non-issue.” The duality of gender for these three female leaders was both minimized and subtly affirmed. PMID:26045192

  14. 77 FR 47490 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-08-08

    ...: --Adoption of the agenda --Decisions of other IMO bodies --Global Maritime Distress and Safety System (GMDSS... facilities --Consideration of operational and technical coordination provisions of maritime safety... Vice-Chairman for 2014 --Any other business --Report to the Maritime Safety Committee Members of the...

  15. 75 FR 64390 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2010-10-19

    ...-eighth Session of the International Maritime Organization's (IMO) Maritime Safety Committee to be held at... --Technical assistance sub-programme in maritime safety and security --Capacity-building for the... --Measures to enhance maritime security --Goal-based new ship construction standards --LRIT-related matters...

  16. 77 FR 72431 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-12-05

    ... other IMO bodies --Global Maritime Distress and Safety System (GMDSS): --Review and modernization of the... operational and technical coordination provisions of maritime safety information (MSI) services, including the... business --Report to the Maritime Safety Committee Members of the public may attend this meeting up to the...

  17. 77 FR 21619 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-04-10

    ... of the International Maritime Organization's (IMO) Marine Safety Committee to be held at the IMO... gases; Implementation of the STCW Convention; Technical assistance sub-programme in maritime safety and...: Consideration and adoption of amendments to mandatory instruments; Measures to enhance maritime security; Goal...

  18. Using a Simulation of a Frustrated Faculty Member During Department Chair Searches: A Proof of Concept Project.

    Science.gov (United States)

    Shapiro, Daniel E; Abbott, Lisa M; Wolpaw, Daniel R; Green, Michael J; Levi, Benjamin H

    2018-02-01

    Vitae reviews, interviews, presentations, and reference checks are typical components of searches used to screen and select new department chairs/heads, but these strategies may fail to identify leaders who can communicate effectively with faculty in common, tense situations. Between May 2015 and November 2016, the authors piloted simulation scenarios in four department chair searches at Penn State College of Medicine/Penn State Health to assess candidates' skill at handling common, challenging situations with faculty members. In the scenarios, a frustrated faculty member complains that he/she has too little time for academic pursuits. Candidates were provided the scenario approximately two weeks in advance. They were asked to explain their goals prior to the 10-minute simulation, do the simulation, and then debrief with the search committees, who observed the interactions. Approximately two-thirds (20/29; 69.0%) of candidates were judged to have successfully passed the simulation and were ultimately advanced. In most cases, the simulations revealed wide variation in candidates' style, substance, and even underlying values that were not otherwise identified through the other parts of the recruitment and screening process. In some cases, candidates who performed well during group and individual interviews did poorly during simulations. The authors will build a larger pool of simulation scenario cases, create a rubric, and formally measure interrater reliability. They will study whether the strategy successfully identifies chairs who will be skilled at navigating common faculty challenges, and if this skill results in greater faculty satisfaction, engagement, and retention.

  19. Risks from electricity generation systems in the far future. Proceedings of a technical committee meeting on approaches for estimating and comparing risks from energy systems in the far future. Working material

    International Nuclear Information System (INIS)

    1998-01-01

    Comparative risk assessment of the health and environmental impacts of electricity generation systems can be used for providing information for decisions concerning choice of electricity generation systems and regulation of the systems. Since the beginning of 1990s, there have been several major studies of comparative risk assessment that have advanced the methodology and knowledge for the assessment of health and environmental impacts of electricity production systems. In those studies, many methodological issues were identified, and it was found that one of the major issues that influenced the results was the time period included in the risk assessment. In the results of recent studies, the impacts for long time periods are influential because of the accumulation of the impacts for more than 100 years and the large uncertainties in the estimations. Examples of such long term impacts are those from global climate change and potential impacts from radionuclides ad non-radioactive pollutants originating from nuclear and other electricity generation systems. It is generally expected that the estimates for longer term impacts have greater uncertainty. In order to enhance the comparative risk studies and the application of the results, the methodology and key issues for estimating the impacts for future :generations should be investigated, and approaches for the assessments should be established. In this connection, the IAEA Technical Committee Meeting TCM on Approaches for Estimating and Comparing Risks from Energy Systems in the Far Future was held at the IAEA Headquarters in Vienna, Austria, from 6 to 10 October 1997. This material contains the proceedings of the TCM held in October 1997, and the latest draft of the technical report, Long-Term Risks from Electricity Generation Systems

  20. ITER technology R and D progress report. Report by the Director. ITER technical advisory committee meeting, 25-27 June 2000, St. Petersburg

    International Nuclear Information System (INIS)

    2001-01-01

    The overall philosophy for the ITER design has been to use established approaches through detailed analysis and to validate their application to ITER through technology R and D, including fabrication of full scale or scalable models of key components. All this R and D work has been done for ITER under collaboration among the Home Teams, with a total resource of about 660 KIUA. R and D issues for ITER-FEAT are almost the same as for the 1998 ITER design. Major developments and fabrication have been completed and tests have significantly progressed. The technical output from the R and D validates the technologies and confirms the manufacturing techniques and quality assurance incorporated in the ITER design, and supports the manufacturing cost estimates for important key cost drivers. The testing of models is continuing to demonstrate their performance margin and/or to optimize their operational use. Their realisation offers insights useful for a possible future collaborative construction activity. Valuable and relevant experience has already been gained in the management of industrial scale, cross-party ventures. The successful progress of these projects increases confidence in the possibility of jointly constructing ITER in an international project framework. The R and D present status is summarized in the following: details are given in Chapters 2 and 3. Significant efforts and resources have been devoted to the Seven Large R and D Projects which cover all the major key components of the basic machine of ITER and their maintenance tools

  1. Chair-side generated posterior monolithic lithium disilicate crowns: clinical survival after 6 years.

    Science.gov (United States)

    Rauch, Angelika; Reich, Sven; Schierz, Oliver

    2017-07-01

    The objective of this prospective clinical study was to evaluate the clinical performance of chair-side generated monolithic lithium disilicate crowns after 72 months. Forty-one posterior full contour crowns made of lithium disilicate ceramic were inserted in 34 patients with a chair-side CAD/CAM technique. One crown per patient was randomly selected for evaluation at baseline, 6, 12, 24, 36, 48, 60 and 72 months according to the modified US Public Health Service criteria. After a mean examination time of 73.2 months (SD ± 1.7 months), 25 crowns were available for re-examination. Within the observation period, three failures occurred due to one crown fracture after 2.9 years, an abutment fracture after 6.0 years, and one severe endodontic problem after 6.1 years. One lithium disilicate crown showed a loss of retention after 2 years but could be reinserted. There were two events of caries below the crown margin, one after 24 and another one after 48 months. Both teeth received cervical adhesive composite fillings. Two abutment teeth changed their sensibility perception from positive to negative within the first 13 months. The failure-free rate was 87.6%, and the complication-free rate was 70.1% after 6 years according to the Kaplan-Meier analysis. Due to the fact that there was only one severe technical complication and the severe biological complications were in a normal range, the clinical performance of monolithic lithium disilicate crowns in the posterior region was completely satisfying. The chair-side application of monolithic lithium disilicate crowns can be recommended.

  2. IAEA technical committee meeting on national NPP personnel training and qualification programmes. Meeting of the Technical Working Group on Training and Qualification of Nuclear Power Plant Personnel (TWG-T-Q). Working material

    International Nuclear Information System (INIS)

    2003-01-01

    The Technical Working Group on Training and Qualification of Nuclear Power Plant Personnel (TWG-T and Q) was established by the Director General of the IAEA in 1994. With the dissolution of the UNIPEDE NPP training group, the TWG-T and Q is considered very important service it is the only international group of experts in the subject area. Objectives of the Meeting: to exchange information on status and trends concerning NPP personnel training and qualification in Member States; to recommend future IAEA activities related to NPP personnel training and qualification; to review the Agency activities on the subject area performed in 2002-2003 and provide recommendations to implement the IAEA programme in 2004-2005. This report is intended for Members of the TWG-T and Q as a record of the work of this group, as well as a general source of information for others who are involved in activities related to the training and qualification of NPP personnel

  3. Introduction and Committees

    Science.gov (United States)

    Angelova, Maia; Zakrzewski, Wojciech; Hussin, Véronique; Piette, Bernard

    2011-03-01

    Valladolid University, Spain George PogosyanUNAM, Mexico, JINR, Dubna, Russia Christoph SchweigertUniversity of Hamburg, Germany Reidun TwarockYork University, UK Luc VinetMontréal University, Canada Apostolos VourdasBradford University, UK Kurt WolfUNAM, Mexico Local Organising Committee Maia Angelova - ChairNorthumbria University, Newcastle Wojtek Zakrzewski - ChairDurham University, Durham Sarah Howells - SecretaryNorthumbria University, Newcastle Jeremy Ellman - WebNorthumbria University, Newcastle Véronique HussinNorthumbria, Durham and University of Montréal Safwat MansiNorthumbria University, Newcastle James McLaughlinNorthumbria University, Newcastle Bernard PietteDurham University, Durham Ghanim PutrusNorthumbria University, Newcastle Sarah ReesNewcastle University, Newcastle Petia SiceNorthumbria University, Newcastle Anne TaorminaDurham University, Durham Rosemary ZakrzewskiAccompanying persons programme Lighthouse Photograph by Bernard Piette: Souter Lighthouse, Marsden, Tyne and Wear, England

  4. Characterization and management of radioactive sodium and other reactor components as input data for the decommissioning of liquid metal-cooled fast reactors. A compilation of data produced of data produced by members of the IAEA technical working group on fast reactors (TWG-FR) at two consultancies and one technical committee meeting. Working material

    International Nuclear Information System (INIS)

    2002-01-01

    A number of liquid metal cooled fast reactors (LMFRs) are in operation and, some have already been shut down; other reactors will reach the end of their design lifetime in a few years and become candidates for decommissioning. It is unfortunate that little consideration was devoted to decommissioning of reactors at the plant design and construction stage. It is with this focus that the Technical Working Group on Fast Reactors (TWGFR) recommended that the IAEA organize the exchange of information on LMFRs decommissioning technology. It was pointed out that the decommissioning of small sodium-cooled reactors has shown that there are two basic differences between thermal and fast reactors decommissioning: on the one side, the treatment and disposal of radioactive sodium coolant, and on the other side, the management of reactor components, for which the structural materials are activated in depth by fast neutrons. To this end, a Technical Committee Meeting on Sodium Removal and Disposal from LMFRs in Normal Operation and in the framework of Decommissioning (Aix-en-Provence, France, November 1997) and two Consultancies on Decommissioning of the Kazakh BN-350 LMFR (Vienna, Austria, October 1996; Obninsk, Russian Federation, February 1998) were convened by the IAEA. These Meetings brought together a group of experts from France, Russia, Kazakhstan, the UK, and the USA to exchange information on, and to review current technical knowledge and experience in the management of radioactive coolant and reactor components following closing of LMFRs, as well as their design features and operating experience relevant for decommissioning procedures. The report provides general and detailed information on activation characteristics of the primary coolant; treatment and disposal of the spent sodium; removal of the residual sodium deposits and decontamination; the activation characteristics of the reactor components and the management of the latter. The recurring theme is finding

  5. New chair for the Particle Physics and Astronomy Research Council

    CERN Multimedia

    2001-01-01

    Peter Warry has been appointed as Chair of PPARC for the next 4 years. Chairman of Victrex plc, whose business is in speciality chemicals, he has been an Industrial Professor at the University of Warwick since 1993. PPARC pursues a programme of high quality basic research in particle physics, astronomy, cosmology and space science and its budget for 2002 is approximately 220 million GBP.

  6. Development of Leadership Skills in Community College Department Chairs

    Science.gov (United States)

    Sirkis, Jocelyn Eager

    2011-01-01

    The role of a community college department chairperson is not well defined and the job is often perceived as more of a burden than an honor. Faculty come to the position frequently by "default" and without a ready set of management and leadership skills. The matter is of concern since chairs influence academic department strategy, culture, and…

  7. Ecohealth Chair on Human and Animal Health in Protected ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Chair will target diseases of animal origin that threaten agro-pastoralists and fisher communities living within and around the Queen Elizabeth National Park in western Uganda, a UNESCO biosphere reserve and a recognized Ramsar Convention site of global importance currently under threat by human activity.

  8. POSTWAR EUROPEAN CHAIR DESIGN. A COMEBACK OF THE STYLE CONNECTION

    Directory of Open Access Journals (Sweden)

    Marina CIONCA

    2015-12-01

    Full Text Available The paper presents the results of studies and research aimed at identifying significant concepts of the design process dynamics of two European designers, Gió Ponti (Italy and Hans Wegner (Denmark. Two of their major chair designs, the Wishbone Chair (Wegner, 1944-49 and the Superleggera Chair (Ponti, 1951-57 were chosen as study cases. Their historical concept sources were carefully investigated and documented, since in the postwar years a tendency towards disregarding the dogmatic functionality of the interwar avant-garde furniture design occurred, making place for a different kind of innovation that did not contradict the natural evolution of form and function, but introduced an inherent elegance of form, as well as exceptional craftsmanship seen as adding value to the industrial production. Formal, compositional, structural and ergonomic elements were analysed, measurements of dimensions and angles were made and compared, sitting positions were visualised, in an attempt to unveil crucial aspects of specific design insights. The good understanding of the style connections, of the significant construction details that confirm the innovative, functional and well-balanced appearance of these chairs, of the careful selection of materials that characterised postwar austerity, contributed to an already confirmed investigative approach, which may be seen as a useful instrument of knowledge not only for design education, but also for design historians, furniture designers, manufacturers and artisans.

  9. New South Africa–Canada Research Chairs Initiative | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-12-08

    Dec 8, 2016 ... create knowledge through world-class research in Africa on natural sciences and engineering (NSE) themes;; build and reinforce sustainable research networks within Africa, and between Canada and Africa, to accelerate the production and uptake of new knowledge; and; leverage existing research chairs ...

  10. The analytic setting today: using the couch or the chair?

    Science.gov (United States)

    Wiener, Jan

    2015-09-01

    This paper re-visits Murray Jackson's 1961 paper in the Journal of Analytical Psychology, 'Chair, couch and countertransference', with the aim of exploring the role of the couch for Jungian analysts in clinical practice today. Within the Society of Analytical Psychology (SAP) and some other London-based societies, there has been an evolution of practice from face-to-face sessions with the patient in the chair, as was Jung's preference, to a mode of practice where patients use the couch with the analyst sitting to the side rather than behind, as has been the tradition in psychoanalysis. Fordham was the founding member of the SAP and it was because of his liaison with psychoanalysis and psychoanalysts that this cultural shift came about. Using clinical examples, the author explores the couch/chair question in terms of her own practice and the internal setting as a structure in her mind. With reference to Bleger's (2013) paper 'Psychoanalysis of the psychoanalytic setting', the author discusses how the analytic setting, including use of the couch or the chair, can act as a silent container for the most primitive aspects of the patient's psyche which will only emerge in analysis when the setting changes or is breached. © 2015, The Society of Analytical Psychology.

  11. Highlight: Kenya selects first research chair on health systems ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-14

    Apr 14, 2016 ... Speaking about the Research Chair program, Dr Moses Rugutt, NACOSTI's Director General said, “Kenya, like many other African countries, suffers brain drain as professionals seek better remuneration and research facilities as well as funding opportunities abroad. This program is hinged on providing a ...

  12. Prof. Frank Shu | Academy – Springer Nature chair | About IASc ...

    Indian Academy of Sciences (India)

    Academy – Springer Nature chair. Prof Frank Shu. Prof. Frank Shu. Shu is known for pioneering theoretical work in a diverse set of fields of astrophysics, including the origin of meteorites, the birth and early evolution of stars and the structure of spiral galaxies. One of his most highly-cited works is a 1977 seminal paper ...

  13. Jubilee Chair | About IASc | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Jubilee Chair. The Jubilee Professorship was instituted during the Platinum Jubilee Year of the Academy (2009). General guidelines are as follows: Eminent scientists from any country and from any scientific discipline can be invited to occupy the Jubilee Professorship for a minimum period of two weeks and up to one ...

  14. Development of Cad Software for Wheel Chair Design | Ayodeji ...

    African Journals Online (AJOL)

    Anthropometric data of Nigerian paraplegics was used to design wheel chair for the paraplegics. This was done by developing suitable software using Visual Basic, AutoCAD, Access and Corel- Draw programs. The software developed is capable of designing an ergonomically viable wheelchair for any category of ...

  15. Chair side simple caries activity test: Ora test.

    Science.gov (United States)

    Bhasin, S; Sudha, P; Anegundi, R T

    2006-06-01

    Oratest, a caries activity test was performed on 48 school going children of Mangalore city to estimate efficacy of the test. High statistical significance was found when the means of control and test group were compared [gamma = 0.913]. The Oratest is found to be a simple chair side, less time consuming and inexpensive caries activity test.

  16. 75 FR 22751 - Federal Advisory Committee; Defense Advisory Committee on Military Personnel Testing; Charter...

    Science.gov (United States)

    2010-04-30

    ... studies to ensure that the tests have utility in predicting success in technical training and on the job... employees. In addition, all Committee members, with the exception of travel and per diem for official travel...

  17. Human Research Program 2010 Chair Standing Review Panel Meeting

    Science.gov (United States)

    Steinberg, Susan

    2011-01-01

    The 13 Human Research Program (HRP) Standing Review Panel (SRP) Chairs, and in some cases one or two additional panel members (see section XIV, roster) referred to as the Chair (+1) SRP throughout this document, met at the NASA Johnson Space Center (JSC) on December 7, 2010 to allow the HRP Elements and Projects to report on their progress over the past year, their current status, and their plans for the upcoming year based on NASA's current goals and objectives for human space exploration. A large focus of the meeting was also used to discuss integration across the HRP scientific disciplines based on a recommendation from the 2009 HRP SRP review. During the one-day meeting, each of the HRP Elements and Projects presented the changes they made to the HRP Integrated Research Plan (IRP Rev. B) over the last year, and what their top three areas of integration are between other HRP Elements/Projects. The Chair (+1) SRP spent sufficient time addressing the panel charge, either as a group or in a separate closed session, and the Chair (+1) SRP and the HRP presenters and observers, in most cases, had sufficient time to discuss during and after the presentations. The SRP made a final debriefing to the HRP Program Scientist, Dr. John B. Charles, prior to the close of the meeting on December 7, 2010. Overall, the Chair (+1) SRP concluded that most of the HRP Elements/Projects did a commendable job during the past year in addressing integration across the HRP scientific disciplines with the available resources. The Chair (+1) SRP agreed that the idea of integration between HRP Elements/Projects is noble, but believes all parties involved should have the same definition of integration, in order to be successful. The Chair (+1) SRP also believes that a key to successful integration is communication among the HRP Elements/Projects which may present a challenge. The Chair (+1) SRP recommends that the HRP have a workshop on program integration (with HRP Element

  18. Emotional Intelligence and Burnout in Academic Radiation Oncology Chairs.

    Science.gov (United States)

    Holliday, Emma B; Bonner, James A; Formenti, Silvia C; Hahn, Stephen M; Kalnicki, Shalom; Liu, Fei-Fei; Movsas, Benjamin; Fuller, Clifton D; Thomas, Charles R

    The importance of emotional intelligence (EI) in physicians has attracted attention as researchers begin to focus on the relationship of EI to retention, promotion, and productivity among academic physicians. However, to date, no formal evaluation of EI has been conducted among current department chairs. The objectives of this study were to assess the EI of current chairs of academic radiation oncology departments and to correlate EI with a self-reported assessment of burnout.The authors invited 95 chairs of academic radiation oncology departments to participate in a survey, approved by an institutional review board, consisting of the Trait Emotional Intelligence Questionnaire Short Form (TEIQue-SF) and the abbreviated Maslach Burnout Inventory (a-MBI). TEIQue-SF scores were evaluated for correlation with respondents' demographics and self-reported burnout scores on the a-MBI. Sixty chairs responded to the survey, for a response rate of 63.2%. The median (interquartile range) TEIQue-SF for the responding cohort was 172 (155-182) out of a maximum possible score of 210. The a-MBI emotional exhaustion and depersonalization subscores were low, with median (interquartile range) scores of 4 (2.25-6.75) and 1 (0-2.75) out of maximum possible scores of 18 and 30, respectively. Higher TEIQue-SF global scores were weakly correlated with decreased burnout. The study results show that academic radiation oncology chairs had a high EI and low rates of self-reported burnout. EI may be of increasing importance with respect to recruitment and retention of academic medical leaders.

  19. 75 FR 57827 - Notice of Meeting of the Committee of Chairs of the Industry Trade Advisory Committees (ITACs)

    Science.gov (United States)

    2010-09-22

    ..., located at 14th Street and Constitution Avenue, NW., Washington, DC 20230. FOR FURTHER INFORMATION CONTACT... Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230. SUPPLEMENTARY INFORMATION: The... Policy Agenda, including discussion of ongoing negotiations and trade strategies. Myesha Ward, Assistant...

  20. Does a dynamic chair increase office workers' movements? - Results from a combined laboratory and field study.

    Science.gov (United States)

    Grooten, Wilhelmus J A; Äng, Björn O; Hagströmer, Maria; Conradsson, David; Nero, Håkan; Franzén, Erika

    2017-04-01

    Dynamic chairs have the potential to facilitate movements that could counteract health problems associated with sedentary office work. This study aimed to evaluate whether a dynamic chair can increase movements during desk-based office work. Fifteen healthy subjects performed desk-based office work using a dynamic office chair and compared to three other conditions in a movement laboratory. In a field study, the dynamic office chair was studied during three working days using accelerometry. Equivocal results showed that the dynamic chair increased upper body and chair movements as compared to the conventional chair, but lesser movements were found compared to standing. No differences were found between the conditions in the field study. A dynamic chair may facilitate movements in static desk-based office tasks, but the results were not consistent for all outcome measures. Validation of measuring protocols for assessing movements during desk-based office work is warranted. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Standing Concertation Committee

    CERN Multimedia

    2007-01-01

    ORDINARY MEETING ON 30 JANUARY 2007 The main items discussed at the meeting of the Standing Concertation Committee on 30 January 2007 included: Administrative Circular No. 26: with the introduction of the merit recognition system in the framework of the 5-yearly review of CERN employment conditions, Administrative Circular No. 26 has been revised. The Committee took note of the revised document which is being finalized for submission to the Director-General for approval in the near future. Technical analysis of CERN Health Insurance Scheme: the Committee was informed that a group has been set up by the Director-General to analyse the financial situation of the CERN Health Insurance Scheme in the short and long term, and to propose measures to ensure that the Scheme remains in financial balance, with adequate cover, over the medium term. The group's terms of reference and membership were communicated. Voluntary programmes It was announced that the programmes: 'part-time work as a pre-retirement mea...

  2. Standing Concertation Committee

    CERN Multimedia

    2007-01-01

    Ordinary meeting on 30 January 2007 The main items discussed at the meeting of the Standing Concertation Committee on 30 January 2007 included: Administrative Circular No. 26: with the introduction of the merit recognition system in the framework of the 5-yearly review of CERN employment conditions, Administrative Circular No. 26 has been revised. The committee took note of the revised document which is being finalized for submission to the Director-General for approval in the near future. Technical analysis of CERN Health Insurance Scheme: the Committee was informed that a group has been set up by the Director-General to analyse the financial situation of the CERN Health Insurance Scheme in the short and long term, and to propose measures to ensure that the Scheme remains in financial balance, with adequate cover, over the medium term. The group's terms of reference and membership were communicated. Voluntary programmes It was announced that the programmes: 'part-time work as a pre-retirement measure...

  3. Nouvelle initiative des chaires de recherche Canada-Afrique du Sud ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    8 déc. 2016 ... Elles s'appuient sur le South African Research Chairs Initiative (SARChl), ainsi que sur le programme de chaires de recherche industrielle, dont le financement provient en partie du Conseil de recherches en sciences naturelles et en génie du Canada (CRSNG) et du Programme des chaires de recherche ...

  4. Transition into the Department Chair Role: The Manager-Leader Continuum

    Science.gov (United States)

    Crowder, James

    2010-01-01

    The Department Chair position is perhaps the most important position on a college campus. Not only do Department Chairs have a large number of individual tasks to perform, but a Chair's actions have potentially large repercussions, since the bulk of the pedagogical and administrative decisions made at institutions of higher education are made at…

  5. 29 CFR 4002.3 - Board of Directors, Chair, and Representatives of Board Members.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Board of Directors, Chair, and Representatives of Board... CORPORATION GENERAL BYLAWS OF THE PENSION BENEFIT GUARANTY CORPORATION § 4002.3 Board of Directors, Chair, and... Labor shall be the Chair of the Board of Directors and shall call and preside over all Board meetings...

  6. 21 CFR 868.5365 - Posture chair for cardiac or pulmonary treatment.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Posture chair for cardiac or pulmonary treatment... SERVICES (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5365 Posture chair for cardiac or pulmonary treatment. (a) Identification. A posture chair for cardiac or pulmonary...

  7. 21 CFR 878.4950 - Manual operating table and accessories and manual operating chair and accessories.

    Science.gov (United States)

    2010-04-01

    ... operating chair and accessories. 878.4950 Section 878.4950 Food and Drugs FOOD AND DRUG ADMINISTRATION... Surgical Devices § 878.4950 Manual operating table and accessories and manual operating chair and accessories. (a) Identification. A manual operating table and accessories and a manual operating chair and...

  8. Department Chair Advice on Teaching and Research at U.S. Research Universities

    Science.gov (United States)

    Taggart, Gabel

    2015-01-01

    Using data from a 2010 survey of academic chairs, this study reports on academic department chairs' recommended time allocations to new assistant professors. I contend that personal values about research and teaching influence the department chair's recommendations along with organizational characteristics. Multi-level modeling indicates that…

  9. Effects of using dynamic office chairs on posture and EMG in standardized office tasks

    NARCIS (Netherlands)

    Ellegast, R.; Hamburger, R.; Keller, K.; Krause, F.; Groenesteijn, L.; Vink, P.; Berger, H.

    2007-01-01

    In the paper a measuring system for the comparative posture and EMG analysis of office chairs is presented. With the system four specific dynamic office chairs that promote dynamic sitting and therefore aim to prevent musculoskeletal disorders (MSD), were analyzed in comparison to a reference chair

  10. 76 FR 33399 - Advisory Committee on International Economic Policy; Notice of Open Meeting

    Science.gov (United States)

    2011-06-08

    ... to the advent of cloud computing as a new business model in international trade, the implications of... of State for Economic, Energy, and Business Affairs Jose W. Fernandez and Committee Chair Ted... and Business Affairs, at (202) 647-2231 or [email protected] . This announcement might appear in the...

  11. 78 FR 25447 - Establishment of the Discretionary Advisory Committee on Heritable Disorders in Newborns and...

    Science.gov (United States)

    2013-05-01

    .... Membership is composed of the Chair, Special Government Employees (SGEs) and federal ex-officio members... membership. The DACHDNC also includes nonvoting liaisons or representatives from Federal Agencies, public... projects from the Committee's subcommittees on Laboratory Standards and Procedures, Follow-up and Treatment...

  12. 76 FR 53165 - Advisory Committee on International Economic Policy; Notice of Open Meeting

    Science.gov (United States)

    2011-08-25

    ... Secretary of State for Economic, Energy, and Business Affairs Jose W. Fernandez and Committee Chair Ted... concerning issues and challenges in international economic policy. The meeting will focus on U.S.-Brazil... Coordinator Tiffany Enoch, Office of Economic Policy Analysis and Public Diplomacy, Bureau of Economic, Energy...

  13. 75 FR 12561 - Request for Applicants for Appointment to the Advisory Committee on Commercial Operations of...

    Science.gov (United States)

    2010-03-16

    ... issues relating to enhanced border and cargo supply chain security, CBP modernization and automation... with the Secretary of the Treasury from representatives of the trade and transportation community that... creation of DHS, the Secretary of the Treasury delegated a joint chair and Committee management role to the...

  14. Initiative internationale des chaires de recherche | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Initiative de recherche de sept ans dotée d'un budget de 8 millions de dollars canadiens. L'Initiative internationale des chaires de recherche a pour but de jumeler d'éminents chercheurs d'universités du Canada avec des homologues de pays en développement afin de relever quelques-uns des plus grands défis auxquels ...

  15. Musical Chairs: An Innovative Teaching and Learning Method

    Science.gov (United States)

    Kuo, Ya-Hui

    2010-01-01

    How teaching and learning takes place in classrooms can be easily seen by the way classrooms are set up: Students' desks and chairs are arranged in rolls while teachers' desks are up front. Yet, why must teachers be the ones who lecture, why can't it be students? Would it be better or worse when teachers are the receivers and the students are the…

  16. Bourdieu, Department Chairs and the Reform of Science Education

    Science.gov (United States)

    Melville, Wayne; Hardy, Ian; Bartley, Anthony

    2011-11-01

    Using the insights of the French sociologist, Pierre Bourdieu, this article considers the role of the science department chair in the reform of school science education. Using Bourdieu's 'thinking tools' of 'field', 'habitus' and 'capital', we case study the work of two teachers who both actively pursue the teaching and learning of science as inquiry. One teacher, Dan, has been a department chair since 2000, and has actively encouraged his department to embrace science as inquiry. The other teacher, Leslie, worked for one year in Dan's department before being transferred to another school where science teaching continues to be more traditional. Our work suggests that there are three crucial considerations for chairs seeking to lead the reform of science teaching within their department. The first of these is the development of a reform-minded habitus, as this appears to be foundational to the capital that can be expended in the leadership of reform. The second is an understanding of how to wield power and position in the promotion of reform. The third is the capacity to operate simultaneously and strategically within, and across, two fields; the departmental field and the larger science education field. This involves downplaying administrative logics, and foregrounding more inquiry-focused logics as a vehicle to challenge traditional science-teaching dispositions-the latter being typically dominated by concerns about curriculum 'coverage'.

  17. Comparisons in Outcome and Subject Comfort between Rotation Chair Systems.

    Science.gov (United States)

    Kim, Bong Jik; Won, Yu-Kyung; Hyun, Jaihwan; Na, Woo-Sung; Jung, Jae Yun; Suh, Myung-Whan

    2017-07-01

    A rotation chair test has been used to evaluate the function of the horizontal semicircular canals. Currently, two chair systems according to the presence of cylindrical darkroom are used in a clinic setting. However, it has not been thoroughly investigated whether one system is superior to the other system or not. In this study, we aimed to compare test outcomes and subject convenience between two systems. Twenty subjects with no history of otologic disease were enrolled. Subjects were tested with two systems: system [A] with a cylindrical chamber and system [B] with no chamber. The results of sinusoidal harmonic acceleration (SHA), step velocity (SV), and visual fixation (VFX) tests were compared between the systems. Subject convenience was assessed with a questionnaire survey and results were compared between the systems. There were no significant differences in gain or asymmetry in SHA test between the systems. However, the phase of system [A] was significantly lower than that of system [B] at 0.16 Hz. There was no significant difference between the systems in directional preponderance (DP) gain or DP time constant. Regarding the VFX test, gain was higher in system [A] than system [B]. Subjects reported less stuffiness and less anxiety with system [B] than system [A], while preferring the system [A] goggles. A rotation chair system without a darkroom can provide a more comfortable experience for subjects in terms of stuffiness and anxiety, while showing comparable results in SHA and SV tests with a darkroom system.

  18. Factors chosen by department chairs as important to family medicine.

    Science.gov (United States)

    Katerndahl, D A

    1994-06-01

    Family medicine faces significant challenges and opportunities in the next 20 years. This study was conducted to determine the importance of departmental factors to the discipline as perceived by the departmental chairs. Following brainstorming of 139 potential important factors, items were grouped into 81 clusters. All 120 family medicine departmental chairs were surveyed as to the importance of each to the discipline. The 81 items were empirically grouped into 9 areas and differences in rankings were analyzed using Friedman's Test. Fifty-eight (48%) of the chairs responded. Although 35 (43%) of the items received a mean rating of 4.0 or higher, teaching and patient care items were among the highest rated. Research and fellowship items were among those receiving the poorest ratings. Of the 9 areas, teaching and faculty issues were ranked significantly higher and fellowships ranked significantly lower than other areas (F = 183.5, p important, teaching and faculty issues were ranked as the most important areas to the discipline while fellowships was ranked least important.

  19. TECHNICAL ENGINEERS AND ADMINISTRATIVE CARRERS COMMITTEE (TEACC)

    CERN Multimedia

    Division des ressources humaines

    2000-01-01

    1.\tComposition and mandateTEACC is composed of a Chairman and of other members of Career Path IX level, nominated by the Leader of Human Resources Division.TEACC examines proposals for change from Career Path VI to Career Path VII and makes its recommendations to the Leader of Human Resources Division.2.\tProcedureProposals may be made to TEACC in the following situations:2.1\tThe staff member possesses a recognised university diploma and is reassigned to a post considered by the division as corresponding to Career Path VII. The proposal may be made after a minimum of one year in the new activity.2.2\tThe staff member does not possess a recognised university diploma and is transferred or reassigned to, or already occupying, a post previously recognised as corresponding to Career Path VII, or considered by the division as having evolved to this level. The proposal may be made, within the annual staff review, when the staff member has occupied the current post for a minimum of one year....

  20. Nuclear Safety Research Review Committee

    International Nuclear Information System (INIS)

    Todreas, N.E.

    1990-01-01

    The Nuclear Safety Research Review Committee has had a fundamental difficulty because of the atmosphere that has existed since it was created. It came into existence at a time of decreasing budgets. For any Committee the easiest thing is to tell the Director what additional to do. That does not really help him a lot in this atmosphere of reduced budgets which he reviewed for you on Monday. Concurrently the research arm of Nuclear Regulatory Commission has recognized that the scope of its activity needed to be increased rather than decreased. In the last two-and-a-half-year period, human factors work was reinstated, radiation and health effects investigations were reinvigorated, research in the waste area was given significant acceleration. Further, accident management came into being, and the NRC finally got back into the TMI-2 area. So with all of those activities being added to the program at the same time that the research budget was going down, the situation has become very strained. What that leads to regarding Committee membership is a need for technically competent generalists who will be able to sit as the Division Directors come in, as the contractors come in, and sort the wheat from the chaff. The Committee needs people who are interested in and have a broad perspective on what regulatory needs are and specifically how safety research activities can contribute to them. The author summarizes the history of the Committee, the current status, and plans for the future

  1. Ankle-brachial blood pressure differences in the beach-chair position of the shoulder surgery.

    Science.gov (United States)

    Choi, Jae Chan; Lee, Jong-Hyuk; Lee, Young-Don; Kim, Soon Yul; Chang, Sei-Jin

    2012-12-01

    During shoulder surgery, blood pressure is frequently measured at the ankle. Anesthetic complications may result when ankle blood pressure is higher than brachial blood pressure and anesthesiologists misinterpret ankle blood pressure as brachial blood pressure. Therefore, we investigated whether ankle blood pressure is significantly higher than brachial blood pressure before anesthesia induction, during induction, after tracheal intubation, before beach chair position, and in the beach chair position. Thirty patients requiring general anesthesia for shoulder surgery were included in this study. Ankle and brachial blood pressure were simultaneously measured before induction, during induction, after intubation, before beach chair position, and in the beach chair position. Ankle blood pressure was higher than brachial blood pressure before induction, during induction, after intubation, before beach chair position, and in the beach chair position. Ankle-brachial blood pressure differences in the beach chair condition were much higher than in four other conditions. The correlation coefficient between mean ankle-brachial blood pressure differences before the beach chair position and mean ankle-brachial blood pressure differences in the beach chair position was 0.616. Brachial systolic blood pressure could be predicted by regression equations (R(2) = 0.306-0.771). These results suggest that anesthesiologists should consider these ankle-brachial blood pressure differences when monitoring anesthesia in the beach chair position.

  2. The effect of chair designs on sitting pressure distribution and tissue perfusion.

    Science.gov (United States)

    Makhsous, Mohsen; Lin, Fang; Hanawalt, David; Kruger, Shannon Lynn; LaMantia, Angie

    2012-12-01

    The aim of this study was to investigate the effect of five chair designs on interface pressure distribution and tissue perfusion in the buttock-thigh region. Prolonged sitting has been found to contribute to the symptoms of work-related low back pain. Studies have found that chair design affects users' sitting posture and comfort. As sitting applies pressure to the user, it is necessary to investigate how chair design affects sitting pressure and tissue perfusion during sitting. We tested five chair designs (Suspension A, Suspension B, Foam A, Foam B, and bicompliant) on 15 young, healthy females. Sitting interface pressure and buttock-thigh tissue perfusion (in terms oftranscutaneous partial pressure of oxygen and carbon dioxide, tcPO2 and tcPCO2, respectively) were measured during 10-min sitting on each chair. We found that chair design significantly affected the distribution of the sitting pressure (p chair designs, the anterior portion of the seat sustained the lowest contact pressure. It was also found that tcPO2 was the lowest (p chair designs. Chair design and materials of the seat significantly affect the sitting interface pressure distribution and tissue perfusion in sitting area. Further evaluation of these outcomes may provide useful information to correlate chair design with sitting comfort.

  3. Cox’s Chair Revisited: Can Spinning Alter Mood States?

    Science.gov (United States)

    Winter, Lotta; Wollmer, M. Axel; Laurens, Jean; Straumann, Dominik; Kruger, Tillmann H. C.

    2013-01-01

    Although there is clinical and historical evidence for a vivid relation between the vestibular and emotional systems, the neuroscientific underpinnings are poorly understood. The “spin doctors” of the nineteenth century used spinning chairs (e.g., Cox’s chair) to treat conditions of mania or elevated arousal. On the basis of a recent study on a hexapod motion-simulator, in this prototypic investigation we explore the impact of yaw stimulation on a spinning chair on mood states. Using a controlled experimental stimulation paradigm on a unique 3-D-turntable at the University of Zurich we included 11 healthy subjects and assessed parameters of mood states and autonomic nervous system activity. The Multidimensional Mood State Questionnaire and Visual Analog Scales (VAS) were used to assess changes of mood in response to a 100 s yaw stimulation. In addition heart rate was continuously monitored during the experiment. Subjects indicated feeling less “good,” “relaxed,” “comfortable,” and “calm” and reported an increased alertness after vestibular stimulation. However, there were no objective adverse effects of the stimulation. Accordingly, heart rate did not significantly differ in response to the stimulation. This is the first study in a highly controlled setting using the historical approach of stimulating the vestibular system to impact mood states. It demonstrates a specific interaction between the vestibular system and mood states and thereby supports recent experimental findings with a different stimulation technique. These results may inspire future research on the clinical potential of this method. PMID:24133463

  4. The Effect of Holding a Research Chair on Scientists’ Impact

    Energy Technology Data Exchange (ETDEWEB)

    Mirnezami, S.R.; Beaudry, C.

    2016-07-01

    This paper examines the effect of holding Canada Research Chair (CRC) on a scientist’s number of citations as a measure of research impact, based on an econometric analysis with combined data on Quebec scientists’ funding and journal publication. Using Generalized Least Square (GLS) method for regression analysis, the results show that holding either tier-1 or tier- 2 of CRC significantly and positively results in conducting research with higher impact. This finding, however, does not necessarily imply that the others are the lesser scientists. (Author)

  5. An analysis of audit committee effectiveness at the largest listed companies in South Africa from a CFO and audit committee perspective

    Directory of Open Access Journals (Sweden)

    Ben Marx

    2009-12-01

    Full Text Available Purpose: The purpose of the study is to investigate and analyse the effective functioning of audit committees at the largest listed companies in South Africa. Problem investigated: The modern audit committee is often seen as the panacea of the corporate world and as such is looked upon to cure all the financial reporting and control-related problems of entities. Audit committees are, however, not always as effective as they are held to be, as is evidenced by the many well-known corporate scandals and business failures that occurred where audit committees existed and fraudulent financial reporting, audit failures, internal control breakdowns and other irregularities prevailed. The modern audit committee will be of value only if it is properly constituted, is functioning effectively and if its role is clearly understood by all the parties concerned. The research problem investigated stems precisely from this issue, and the paper therefore aims to analyse the effective functioning of the audit committees at the largest listed companies in South Africa. Methodology: The study empirically tested the audit committee practices at the largest listed companies in South Africa. This was done through questionnaires addressed to the CFOs and audit committee chairs. Findings: The study found that audit committees at the largest listed companies in South Africa are well established, properly constituted, have the authority and resources to effectively discharge their responsibilities and consist of members who act independently and who have the right mix of appropriate experience, financial literacy and financial expertise amongst their members. The audit committee's role was found to be generally well understood and supported by the board and the Chief Financial Officers. It was further found that the audit committees are effective in discharging their oversight responsibilities on the board's behalf, with the only real exception being their effectiveness

  6. Cardiovascular consequence of reclining vs. sitting beach-chair body position for induction of anesthesia

    DEFF Research Database (Denmark)

    Larsen, Soren L.; Lyngeraa, Tobias S.; Maschmann, Christian P.

    2014-01-01

    The sitting beach-chair position is regularly used for shoulder surgery and anesthesia may be induced in that position. We tested the hypothesis that the cardiovascular challenge induced by induction of anesthesia is attenuated if the patient is placed in a reclining beach-chair position....... Anesthesia was induced with propofol in the sitting beach-chair (n = 15) or with the beach-chair tilted backwards to a reclining beach-chair position (n = 15). The last group was stepwise tilted to the sitting beach-chair position prior to surgery. Hypotension was treated with ephedrine. Continuous...... ± 12 vs. 45 ± 15 % reduction from baseline, p = 0.04) and ScO2 (7 ± 6 vs. 1 ± 8% increase from baseline, p = 0.02) and received less ephedrine (mean: 4 vs. 13 mg, p = 0.048). The higher blood pressure and lower need of vasopressor following induction of anesthesia in the reclining compared...

  7. Does physical exposure throughout working life influence chair-rise performance in midlife?

    DEFF Research Database (Denmark)

    Møller, Anne; Reventlow, Susanne; Hansen, Åse Marie

    2015-01-01

    OBJECTIVES: Our aim was to study associations between physical exposures throughout working life and physical function measured as chair-rise performance in midlife. METHODS: The Copenhagen Aging and Midlife Biobank (CAMB) provided data about employment and measures of physical function. Individual......-years and chair-rise performance (number of chair-rises in 30 s) were analysed in multivariate linear and non-linear regression models adjusted for covariates. RESULTS: Mean age among the 5095 participants was 59 years in both genders, and, on average, men achieved 21.58 (SD=5.60) and women 20.38 (SD=5.33) chair......-rises in 30 s. Physical exposures were associated with poorer chair-rise performance in both men and women, however, only associations between lifting and standing/walking and chair-rise remained statistically significant among men in the final model. Spline regression analyses showed non-linear associations...

  8. Respiratory chest movement measurement as a chair quality indicator--preliminary observations.

    Science.gov (United States)

    Szczygieł, Elżbieta; Zielonka, Katarzyna; Mazur, Tadeusz; Mętel, Sylwia; Golec, Joanna

    2015-01-01

    Regardless of the constantly increasing time man is spending in a sitting position, there is still a lack of objective chair quality assessment criteria. The aim of this paper is to find the answer to whether respiratory chest movement measurements can be a chair quality indicator. The study included 34 participants (mean 34.7 years±5.2). Their chest movements were assessed using respiratory inductive plethysmography while sitting on two subsequent chairs. Significant differences in chest movements depending on chair type were observed concerning the breathing duct (upper and lower) and breathing movement amplitude. The amplitude of the upper respiratory track in the first chair was higher (239.4 mV) compared with the second seat (207.3 mV) (p=.018). The analyzed parameters of respiratory chest movement may become a helpful indicator for design and selection of chairs which enable people to both work and relax in the most ergonomic conditions.

  9. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    Energy Technology Data Exchange (ETDEWEB)

    Rathbone, Bruce A.

    2009-08-28

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  10. Development of New Wheel-Chair for Sports Competition

    Directory of Open Access Journals (Sweden)

    Akira Shionoya

    2018-03-01

    Full Text Available The purpose of this study was to develop the new wheel-chair which had the function to drive straight by one-hand operation. To perform this purpose, the driving force transmission axis (DFTA which had transmitted the driving force from the one side of wheel to another side of that was developed. The wheel-chair could drive straight by one-hand operation by the DFTA. The large torque, however, was generated in the DFTA, because the DFTA transmitted the driving force from the one side of wheel to another side by the axis of small diameter. Furthermore, the shear stress in the DFTA generated by this torque would lead to the DFTA break. The shear stress in the DFTA was calculated to examine the axial strength and durability. On the DETA of the wheelchair, the maximum shear stress calculated from the torque in driving was 39.53 MP and this was defined as the standard of the demand specifications as a strength and durability of the DFTA.

  11. Job satisfaction among chairs of surgery from Europe and North America.

    Science.gov (United States)

    Tschuor, Christoph; Raptis, Dimitri Aristotle; Morf, Manuela Christina; Staffelbach, Bruno; Manser, Tanja; Clavien, Pierre-Alain

    2014-11-01

    Strong evidence exists associating job satisfaction and risk of burnout with productivity, efficiency, and creativity in many organizations. However no data are available assessing chairs of surgery. This study assessed job satisfaction and risk for burnout of surgical chairs from Europe and North America and identified contributing factors. A survey among 650 chairs in surgery from 23 European and 2 North American countries was conducted in 2012. Satisfaction at work was analyzed using the validated Global Job Satisfaction (GJS) instrument and the abbreviated Maslach Burnout Inventory. Additional items targeting personal and environmental factors were included. The rate of chairs reached successfully was 86%, the overall response rate was 29% (188/650), with 1% female. Median age was 58 years. 11% of chairs were dissatisfied with work. Younger age and being fewer years in practice as a chair was associated with higher job satisfaction (P = .054 and P = .003). Surgical specialty with the greatest median GJS score was hepatopancreatobiliary, whereas vascular surgery scored lowest. Chairs desire to devote 20% more of their time on research. Clerical support as well as the ability to be innovative was suggested by 51% and 45%, respectively, to improve job satisfaction. Compared with Europeans, North American chairs were overall more satisfied and would recommend their job to their children. North American chairs seem to be more satisfied at work and at less risk for burnout than European chairs. The overall job satisfaction was greater among chairs compared with previously published reports of young, board-certified surgeons or residents (89% vs 87% and 66%, respectively). The superior satisfaction in chairs is strongest related to career achievements, innovation, and lifestyle. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. Technical infrastructures workshop (Chair). Knowledge Exchange Workshop : Research data management activities and challenges

    NARCIS (Netherlands)

    Grim, R.

    2011-01-01

    Scientific data Infrastructures can be defined as managed digital scientific data-networked environments consisting of services and tools that support: (i) the full life cycle of scientific data (capture, collection, curation, documentation, analysis, visualization, preservation, and publication),

  13. Executive onboarding: ensuring the success of the newly hired department chair.

    Science.gov (United States)

    Ross, Warren E; Huang, Karen H C; Jones, Greg H

    2014-05-01

    The success of newly recruited medical school department chairs has become increasingly important for achievement of organizational goals. An effective onboarding program for these chairs can greatly facilitate early success, as well as satisfaction of the new hire with the position and the school. Onboarding programs can include traditional orientation items such as payroll signup and parking details, but should focus heavily on sharing organizational structure, culture, and how things get done. The goals of onboarding will be well served by implementation of three roles in the process. An Orientation Navigator can assist the new chair in the orientation phase, completing new employee documents and navigating the day-to-day challenges of working at the location. A Peer Mentor, generally a sitting chair, serves as both "buddy" and mentor, providing moral support as well as ensuring that the new chair gains an understanding of the people and processes important for getting things done. A Transition Mentor serves over a longer term as a sounding board and coach outside the peer group, assisting in a variety of ways to promote the chair's growth, development, and success as a leader. Finally, any onboarding process is significantly compromised without the active participation of the dean, meeting regularly with the chair to clarify expectations, promote assimilation, and solve problems. Successful onboarding begins with a mindfulness of the needs of the newly hired chair, and a well-designed and well-implemented plan will have wide-ranging benefits for the chair and the organization.

  14. A competency-based approach to recruiting, developing, and giving feedback to department chairs.

    Science.gov (United States)

    Palmer, Megan; Hoffmann-Longtin, Krista; Walvoord, Emily; Bogdewic, Stephen P; Dankoski, Mary E

    2015-04-01

    Academic health centers (AHCs) are under unprecedented pressure, making strong leadership during these challenging times critical. Department chairs have tremendous influence in their AHCs, yet data indicate that--despite outstanding academic credentials--they are often underprepared to take on these important leadership roles. The authors sought to improve the approach to recruiting, developing, and giving feedback to department chairs at their institution, the Indiana University School of Medicine (IUSM), by reorganizing these processes around six key leadership competencies: leadership and team development, performance and talent management, vision and strategic planning, emotional intelligence, communication skills, and commitment to the tripartite mission. Over a two-year period (2009-2011), IUSM faculty and administrators developed standardized recruitment procedures to assess potential chairs based on the six leadership domains, and searches are now streamlined through centralized staff support in the dean's office. Additionally, IUSM offers a chair development series to support learning around these leadership competencies and to meet the stated professional development needs of the chairs. Finally, chairs receive structured feedback regarding their leadership (among other considerations) through two different assessment instruments, IUSM's Department Chair 360° Leadership Survey and IUSM's Faculty Vitality Survey--both of which the dean reviews annually. Strategically attending to the way that chairs are selected, developed, and given feedback has tremendous potential to increase the success of chairs and, in turn, to constructively shape the culture of AHCs.

  15. Strengthening the Capacity of the Economic Committee of the ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Committee receives technical support from the Economic Department of the Office of the National Assembly (EDNA). Building research capacity, especially among young staff members of EDNA, is critical to improving the quality of research results generated for the Economic Committee. ... IDRC Officer. Due, Evan ...

  16. 77 FR 16535 - Request for Nominations of Members To Serve on the Census Bureau National Advisory Committee on...

    Science.gov (United States)

    2012-03-21

    ... Committee addresses census policies, research and methodology, tests, operations, communications/messaging..., considering such factors as race, ethnicity, geography, gender, technical expertise, community involvement... to equal opportunity in the workplace and seeks diverse Advisory Committee membership. Dated: March...

  17. An International Survey of Approaches to Chair Restraint of Nonhuman Primates.

    Science.gov (United States)

    McMillan, Jennifer L; Bloomsmith, Mollie A; Prescott, Mark J

    2017-10-01

    Specifically designed restraint chairs are the preferred method of restraint for research studies that require NHP to sit in place for sustained periods of time. In light of increasing emphasis on refinement of restraint to improve animal wellbeing, it is important to have a better understanding of this potentially stressful procedure. Although chair restraint is used internationally, very little published information is available on this subject. We developed a survey to obtain an overview of equipment, procedures, and plans for improvement regarding chair restraint. We received 101 responses from people working in academic, government, contract research, and pharmaceutical laboratories within the Americas, Europe and Asia. Findings indicate that the majority of laboratories using restraint chairs work with macaque species. Restraint chairs are used for a wide range of procedures, including cognitive testing, recording neuronal activity, functional MRI, intravenous infusion, and blood sampling. Approximately 2/3 of laboratories use an enclosed 'box chair,' which the animal is trained to enter and then to extend its head through an opening on the top of the chair; the remaining one third of laboratories use an 'open chair' design, in which manual handling or the pole-and-collar system is used to transfer and secure the animal into the chair. Respondents reported that when selecting the type of chair to use, they considered comfort for the animal, ease of use, and the ability to adjust fit between animals of different sizes. Various training methods and timeframes are used to prepare macaques for restraint chair procedures. Several laboratories are incorporating greater use of positive reinforcement training. The community that uses these restraint procedures needs to work together to define best practice; our survey results can help in that effort.

  18. 78 FR 49725 - Census Scientific Advisory Committee

    Science.gov (United States)

    2013-08-15

    ... policy, research, and technical issues relating to a full range of Census Bureau programs and activities...-language interpretation or other auxiliary aids should also be directed to the Committee Liaison Officer as... Census. American Community Survey Questionnaire Review. Cyberinfrastructure and Adaptive Design Working...

  19. 77 FR 260 - Forest Resource Coordinating Committee

    Science.gov (United States)

    2012-01-04

    ... the Food, Conservation, and Energy Act of 2008 to advise the Secretary of Agriculture on priorities... fish and wildlife agency. An owner of nonindustrial private forest land. Two conservation organization representatives. A representative from an Indian Tribe. A representative from a State Technical Committee...

  20. Surgeons’ muscle load during robotic-assisted laparoscopy performed with a regular office chair and the preferred of two ergonomic chairs

    DEFF Research Database (Denmark)

    Dalager, T.; Jensen, P. T.; Winther, T. S.

    2018-01-01

    associated with poor ergonomics and musculoskeletal pain. The ergonomic condition in the robotic console is partially dependent upon the chair provided, which often is a regular office chair. Our study quantified and compared the muscular load during robotic-assisted laparoscopy using one of two custom built...... for musculoskeletal injuries measured by the Rapid Upper Limb Assessment worksheet. Authors advocate for further investigation in surgeons’ ergonomics and physical work demands in robotic surgery....

  1. Airline Chair-rest Deconditioning: Induction of Immobilization Thromboemboli?

    Science.gov (United States)

    Greenleaf, J. E.; Rehrer, N. J.; Mohler, S. R.; Quach, D. T.; Evans, D. G.; Dalton, Bonnie P. (Technical Monitor)

    2002-01-01

    Air passenger miles will likely double by year 2020. The altered and restrictive environment in an airliner cabin can influence hematological homeostasis in passengers and crew. Flight-related deep various thromboemboli (DVT) have been associated with at least 577 deaths on 42 of 120 airlines from 1977 to 1984 (25 deaths/million departures), whereas many such cases go unreported. However, there are four major factors that could influence formation of possible flight-induced DVT: sleeping accomodations (via sitting immobilization), travelers' medical history (via tissue injury), cabin environmental factors (via lower partial pressure of oxygen and lower relative humidity), and the more encompassing chair-rest deconditioning (C-RD) syndrome. There is ample evidence that recent injury and surgery (especially in deconditioned hospitalized patients) facilitate thrombophlebitis and formation of DVT that may be exacerbated by the immobilization of prolonged air travel. In the healthy flying population immobilization factors associated with prolonged (> 5 hr) C-RID such as total body dehydration, hypovolemia and increased blood viscosity, and reduced various blood flow (pooling) in the legs may facilitate formation of DVT. However, data from at least four case-controlled epidemiological studies did not confirm a direct causative relationship between air travel and DART, but factors such as history of vascular thromboemboli, various insufficiency, chronic heart failure, obesity, immobile standing position, more than 3 pregnancies, infectious disease, long-distance travel, muscular trauma and violent physical effort were significantly more frequent in DVT patients than in controls. Thus, there is no clear, direct evidence yet that prolonged sitting in airliner seats, or prolonged experimental chair-rest- or bed- rest-deconditioning treatments cause deep various thromboemboli in healthy people.

  2. Airline chair-rest deconditioning: induction of immobilisation thromboemboli?

    Science.gov (United States)

    Greenleaf, John E.; Rehrer, Nancy J.; Mohler, Stanley R.; Quach, David T.; Evans, David G.

    2004-01-01

    Air passenger miles will likely double by year 2020. The altered and restrictive environment in an airliner cabin can influence haematological homeostasis in passengers and crew. Flight-related deep venous thromboemboli (DVT) have been associated with at least 577 deaths on 42 of 120 airlines from 1977 to 1984 (25 deaths/million departures), whereas many such cases go unreported. However, there are four major factors that could influence formation of possible flight-induced DVT: sleeping accommodations (via sitting immobilisation); travellers' medical history (via tissue injury); cabin environmental factors (via lower partial pressure of oxygen and lower relative humidity); and the more encompassing chair-rest deconditioning (C-RD) syndrome. There is ample evidence that recent injury and surgery (especially in deconditioned hospitalised patients) facilitate thrombophlebitis and formation of DVT that may be exacerbated by the immobilisation of prolonged air travel.In the healthy flying population, immobilisation factors associated with prolonged (>5 hours) C-RD such as total body dehydration, hypovolaemia and increased blood viscosity, and reduced venous blood flow (pooling) in the legs may facilitate formation of DVT. However, data from at least four case-controlled epidemiological studies did not confirm a direct causative relationship between air travel and DVT, but factors such as a history of vascular thromboemboli, venous insufficiency, chronic heart failure, obesity, immobile standing position, more than three pregnancies, infectious disease, long-distance travel, muscular trauma and violent physical effort were significantly more frequent in DVT patients than in controls. Thus, there is no clear, direct evidence yet that prolonged sitting in airliner seats, or prolonged experimental chair-rest or bed-rest deconditioning treatments cause DVT in healthy people.

  3. Rio 2016 accessibility technical guidelines

    OpenAIRE

    2015-01-01

    This document combines the accessibility standards issued by the Brazilian Technical Standards Association (ABNT)* with the requirements of the International Paralympic Committee (IPC)’s Accessibility Guide and Brazilian laws, decrees and resolutions. The purpose of this publication is to guide the design, development and implementation of projects.

  4. Do institutional logics predict interpretation of contract rules at the dental chair-side?

    Science.gov (United States)

    Harris, Rebecca; Brown, Stephen; Holt, Robin; Perkins, Elizabeth

    2014-12-01

    In quasi-markets, contracts find purchasers influencing health care providers, although problems exist where providers use personal bias and heuristics to respond to written agreements, tending towards the moral hazard of opportunism. Previous research on quasi-market contracts typically understands opportunism as fully rational, individual responses selecting maximally efficient outcomes from a set of possibilities. We take a more emotive and collective view of contracting, exploring the influence of institutional logics in relation to the opportunistic behaviour of dentists. Following earlier qualitative work where we identified four institutional logics in English general dental practice, and six dental contract areas where there was scope for opportunism; in 2013 we surveyed 924 dentists to investigate these logics and whether they had predictive purchase over dentists' chair-side behaviour. Factor analysis involving 300 responses identified four logics entwined in (often technical) behaviour: entrepreneurial commercialism, duty to staff and patients, managerialism, public good. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  5. Office task effects on comfort and body dynamics in five dynamic office chairs

    NARCIS (Netherlands)

    Groenesteijn, L.; Ellegast, R.P.; Keller, K.; Krause, F.; Berger, H.; Looze, M.P.de

    2012-01-01

    In the present study, we investigated the effect of office tasks on posture and movements in field settings, and the comfort rating for chair characteristics and correlation with type of task. The tasks studied were: computer work, telephoning, desk work and conversation. Postures, movements, chair

  6. Effectiveness of Ergonomic Chair against Musculoskeletal Disorders in Female Batik Workers of Sragen District

    Directory of Open Access Journals (Sweden)

    Sumardiyono Sumardiyono

    2014-08-01

    Full Text Available The majority of female batik workers uses non-ergonomic chairs (dingklik that pose risks of musculoskeletal disorders. This study aimed to design an ergonomic chair and evaluate its effectiveness in reducing musculoskeletal disorders among the workers. This is a quasi-experimental study (using one group pre and post-test design on 50 female batik workers selected by quota sampling. Musculoskeletal disorders were measured among the samples before and after the use of the designed ergonomic chair which they were asked to use for two months. T-test, ANCOVA, Wilcoxon test, McNemar test and Chi Square test were used for the analysis. The study found statistical significant differences of risk factor against musculoskeletal disorders among the workers before and after their use of the designed ergonomic chair (p=0.000; and of musculoskeletal disorders before and after using the ergonomic chair (p= 0,035. Body Mass Index (BMI was identified as a confounding factor, and statistical significant difference of musculoskeletal disorders were also found among the workers with 25 BMI even before and after using the ergonomic chair (p=0.033 and p=0.015 respectively. By ANCOVA statistical test, after controlling BMI, another statistical difference of musculoskeletal disorders was also identified before and after using the ergonomic chair (p=0.033. It is concluded that the designed ergonomic chair is effective to reduce the risk of musculoskeletal disorders.

  7. A Theoretical Model for Designing an In-House Community College Department Chair Professional Development Program

    Science.gov (United States)

    Sirkis, Jocelyn Eager

    2013-01-01

    Academic department chairs serve as front-line managers and leaders who perform a wide variety of tasks. These tasks may include mundane chores, such as ordering office supplies, or important ones, such as changing the department culture to one that embraces assessment. Too often, however, individuals take on the chair position with little to no…

  8. 20 CFR 661.320 - Who must chair a Local Board?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Who must chair a Local Board? 661.320 Section 661.320 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR STATEWIDE AND... Governance Provisions § 661.320 Who must chair a Local Board? The Local Board must elect a chairperson from...

  9. Chair Perceptions of Trust between Mentor and Mentee in Online Doctoral Dissertation Mentoring

    Science.gov (United States)

    Rademaker, Linnea L.; Duffy, Jennifer O'Connor; Wetzler, Elizabeth; Zaikina-Montgomery, Helen

    2016-01-01

    We explored online dissertation chairs' perceptions of trust in the mentor-mentee relationship, as trust was identified as a crucial factor in the success of doctoral students. Through the implementation of a multiple-case study, and a qualitative, online questionnaire, and through qualitative data analysis, we discovered 16 chairs' perceptions of…

  10. The Community College Department Chair and Curriculum Leadership: Managing Learning and Learning to Manage

    Science.gov (United States)

    Sweeney, Kathleen Jennings

    2012-01-01

    Dwindling resources, the challenges of providing postsecondary remedial education, and an environment that emphasizes outcomes assessment are realities that confront the community college department chair. The role of the department chair is particularly challenging in the community college context due to accountability pressures, fiscal…

  11. Cardiovascular consequence of reclining vs. sitting beach-chair body position for induction of anesthesia.

    Science.gov (United States)

    Larsen, Søren L; Lyngeraa, Tobias S; Maschmann, Christian P; Van Lieshout, Johannes J; Pott, Frank C

    2014-01-01

    The sitting beach-chair position is regularly used for shoulder surgery and anesthesia may be induced in that position. We tested the hypothesis that the cardiovascular challenge induced by induction of anesthesia is attenuated if the patient is placed in a reclining beach-chair position. Anesthesia was induced with propofol in the sitting beach-chair (n = 15) or with the beach-chair tilted backwards to a reclining beach-chair position (n = 15). The last group was stepwise tilted to the sitting beach-chair position prior to surgery. Hypotension was treated with ephedrine. Continuous hemodynamic variables were recorded by photoplethysmography and frontal cerebral oxygenation (ScO2) by near infrared spectroscopy. Significant differences were only observed immediately after the induction when patients induced in a reclining beach-chair position had higher mean arterial pressure (MAP) (35 ± 12 vs. 45 ± 15 % reduction from baseline, p = 0.04) and ScO2 (7 ± 6 vs. 1 ± 8% increase from baseline, p = 0.02) and received less ephedrine (mean: 4 vs. 13 mg, p = 0.048). The higher blood pressure and lower need of vasopressor following induction of anesthesia in the reclining compared to the sitting beach-chair position indicate more stable hemodynamics with the clinical implication that anesthesia should not be induced with the patient in the sitting position.

  12. King among Kings: Understanding the Role and Responsibilities of the Department Chair in Higher Education

    Science.gov (United States)

    Berdrow, Iris

    2010-01-01

    The role and responsibilities of the chair of an academic department in higher education is considered from the perspective of both actor and agent, within the context of the institution being served and the department being represented. The intent of this article is to further research on the role of department chair by analyzing it in the…

  13. The Body Language Behaviours of the Chairs of the Disputes According to the Disputants

    Science.gov (United States)

    Caliskan, Nihat

    2009-01-01

    The perception form of the body language behaviours of the session chairs by disputants affects the efficiency of the process. Therefore, it is important to determine the effects of the mimic, gesture, physical appearance and tonality and accent of the chairs on disputants. That research was conducted to clarify how the disputants perceive the…

  14. 76 FR 17118 - Environmental Management Site-Specific Advisory Board Chairs

    Science.gov (United States)

    2011-03-28

    ... Product Development Thursday, April 14, 2011 [cir] EM Headquarters Groundwater Update [cir] EM SSAB Chairs' Roundtable Discussion: Day Two Presentations and Product Development Public Participation: The EM SSAB Chairs... empowered to conduct the meeting in a fashion that will facilitate the orderly conduct of business...

  15. 75 FR 17701 - Environmental Management Site-Specific Advisory Board Chairs

    Science.gov (United States)

    2010-04-07

    ... Waste Disposition [cir] EM SSAB Chairs' Roundtable Discussion: Day One Presentations and Product... Presentations and Product Development Public Participation: The EM SSAB Chairs welcome the attendance of the... a fashion that will facilitate the orderly conduct of business. Individuals wishing to make public...

  16. 76 FR 30695 - Environmental Management Site-Specific Advisory Board Chairs

    Science.gov (United States)

    2011-05-26

    ... Update, [cir] EM SSAB Chairs' Roundtable Discussion: Day One Presentations and Product Development... Discussion: Day Two Presentations and Product Development. Public Participation: The EM SSAB Chairs welcome... empowered to conduct the meeting in a fashion that will facilitate the orderly conduct of business...

  17. The Technical Student Programme draws Norwegians

    CERN Multimedia

    Maria Martin Sanchez

    2005-01-01

    Erik Hejne, second from left, Chairman of the Technical Students Committee, and Jens Vigen, who is concerned spefically with Norwegian students at CERN, with some of the Norwegian technical students who arrived at CERN in spring 2005, together with their teachers.

  18. Development of an inexpensive, low attenuation styrofoam primate chair for use in a PET scanner.

    Science.gov (United States)

    Kortekaas, R; van Waarde, A; Maguire, R P; Leenders, K L; Elsinga, P H

    2004-04-01

    Pharmacokinetic modelling of radiotracers for positron emission tomography (PET) imaging of neuroreceptors can be performed with time-activity data for brain and blood. We aimed to develop an alternative to withdrawal of arterial blood samples for acquisition of a blood curve. A supportive primate chair was constructed out of styrofoam and fixed to the head portion of the bed of a PET scanner. A lightly anaesthetised rhesus monkey was positioned in the chair in a sitting position and injected with the radiotracer. The styrofoam chair provided sufficient support for the monkey. The presence of the chair in the PET scanner caused negligible attenuation of radiation, allowing simultaneous acquisition of dynamic data from the subject's brain and heart. We conclude that a styrofoam primate chair is an ideal tool to measure blood and brain data from a rhesus monkey with PET. Invasiveness to the animal is reduced, as well as experimenter time.

  19. Usefulness of chair stand time as a surrogate of gait speed in diagnosing sarcopenia.

    Science.gov (United States)

    Nishimura, Takayuki; Arima, Kazuhiko; Okabe, Takuhiro; Mizukami, Satoshi; Tomita, Yoshihito; Kanagae, Mitsuo; Goto, Hisashi; Horiguchi, Itsuko; Abe, Yasuyo; Aoyagi, Kiyoshi

    2017-04-01

    Determining gait speed as a measure of physical performance is recommended in diagnosing sarcopenia. Gait speed measurements require a certain amount of space (e.g. a 6-m course), and might not be feasible in clinical settings or heath checkup examination sites. We developed a formula to estimate chair stand time based on gait speed, and examined the validity (sensitivity and specificity) of using the estimated chair stand time cut-off point as a surrogate for the recommended gait speed cut-off point. Chair stand time was defined as the time it took to stand up from a standard chair five times. Gait speed was calculated from the time required for participants to walk a 6-m course at their usual pace. Simple regression analysis showed a significant negative relationship between chair stand time and gait speed (P chair stand time = -8.41 × gait speed + 20.0 (R 2  = 0.34). Therefore, the chair stand time cut-off point was estimated to be 13.3 s by inserting the recommended gait speed cut-off of 0.8 m/s in the above formula. Rounding off to make its use simpler, the estimated chair stand time cut-off was 13 s. The sensitivity and specificity of the estimated chair stand time cut off were 0.75 and 0.94, respectively. Chair stand time might be useful as a surrogate of gait speed when screening for sarcopenia. Geriatr Gerontol Int 2017; 17: 659-661. © 2016 Japan Geriatrics Society.

  20. Report on the second meeting of the project advisory committee (technical) for IAEA/WHO project EGY/6/004 (Egyptian Cancer Project) 3-9 April 1984, at NEMROCK, Cairo

    International Nuclear Information System (INIS)

    Taylor, C.G.B.

    1984-07-01

    The purpose of the meeting was to review the first year's work and make recommendations for the future. The Committee dealt mainly with the Training Course, the selection of cases suitable for treatment by simple means, the revision of treatment notes and protocols, planning for the cytology (early diagnosis) programme, the collection and manipulation of data, the extension of the Project in Egypt, and its possible extension to other countries

  1. Education and energy sustainability: Ten-year contribution of UNESCO Chair TU Sofia and REgional Network Engineering for Development (RENED)

    International Nuclear Information System (INIS)

    Monchaud, S.

    2006-01-01

    The United Nations Organization (UNO) implemented and supported all the recommendations and conclusions of the World Summit on the Earth State and more recently on Sustainable Development. Since 1952, UNESCO has received the tasks to develop studies and training on Education and Energy Sustainability. The UNESCO Chair 'Engineering for Development' established at the Technical University of Sofia (Bulgaria) in 1994 contributed from the beginning to these tasks. This paper will summarise the activities developed and the results reached as well some proposals of improvements in the near future. After some historical data about the Tempus-Tacis project and how Uchinsa has been involved as partner institution, the paper describes the actions promoted by Uchinsa and the first results achieved. Some first conclusions and recommendations and the next steps to be made by Uchinsa and the Ukrainian partners institutions to continue the cooperation even after the end of this project, are proposed. (author)

  2. The Audit Committee. AGB Effective Committee Series

    Science.gov (United States)

    Staisloff, Richard L.

    2011-01-01

    This publication is part of an Association of Governing Boards of Universities and Colleges (AGB) series devoted to strengthening the role of key standing committees of governing boards. While there is no optimum committee system for institutions of higher education, certain principles, practices, and procedures prevail. The best practices…

  3. Burnout in chairs of obstetrics and gynecology: diagnosis, treatment, and prevention.

    Science.gov (United States)

    Gabbe, Steven G; Melville, Jennifer; Mandel, Lynn; Walker, Edward

    2002-04-01

    The purpose of this study was to determine the prevalence of burnout in chairs of academic departments of obstetrics and gynecology, identify important stressors, and develop strategies to treat and prevent burnout. We performed a cross-sectional study of 131 chairs in the United States and Puerto Rico. We used a 6-part questionnaire focusing on demographics, potential stressors, satisfaction with personal and professional life, self-efficacy, burnout as measured by the Maslach Burnout Inventory-Human Services Survey (MBI-HSS), and support from the spouse/partner and family. Statistical analyses were performed with the chi(2) test for categorical variables and t test or analysis of variance for continuous variables. Questionnaires were returned from 119 chairs, 110 men and 9 women, a response rate of 91%. Chairs had served an average of 7.2 years. They worked an average of 67.4 hours each week, spending 45% of their time in administrative duties, 31% in patient care, 15% in teaching, and 8% in research. Female chairs worked significantly more hours per week than male chairs, 76.9 versus 66.7 hours (P =.005). Chairs who had served >10 years worked significantly fewer hours each week than did those who had been chairs budget deficits, Medicare/Medicaid billing audits, loss of key faculty, union disputes, and faculty, resident, and staff dismissals. To deal with stress, chairs most often spent time with family and friends. Twenty-two percent of chairs were somewhat-very dissatisfied with their positions. The MBI-HSS revealed a high subscale score for emotional exhaustion, moderate-high for depersonalization, and high for personal accomplishment. High emotional exhaustion was observed in younger chairs, those who worked nearly 70 hours each week, and those with less spouse/partner support. Burnout was more common in new chairs. Burnout in chairs of obstetrics and gynecology is characterized by a high level of emotional exhaustion, moderate-high depersonalization, and

  4. Do we need a "Chair of alternative methods", and where?

    Science.gov (United States)

    Wendel, Albrecht

    2002-01-01

    During the last two decades, the field of in vitro technology has been successfully developed and its use is continuously growing. Advanced tests avoiding animal experiments will be increasingly required for routine industrial applications e.g. for pharmacological high-throughput screening. Moreover and even more importantly, the availability of human cell based methods is essential for future quality assurance and risk assessment in the fields of health and consumer protection as well as environmental protection. Thereby, the potential of such advanced in vitro methods extends far beyond the mere replacement of regulated tests. In practice, the introduction and expansion of this technology has been achieved predominantly by offering funding and awards to the scientific community. After this initiation phase, the next consequent step to exploit this knowledge clearly consists in academic promotion of this new scientific culture in an institutionalised form. The tasks of such a chair focussed on advanced in vitro tests - most probably the first of its kind world-wide - would cover in addition to (a) research and (b) teaching, (c) the sharpening of social conscience for the topic. (a) While the validation of alternative methods was formally established by founding institutions like ZEBET in Berlin on the national and ECVAM in Ispra on the European level, the development of further new and more sophisticated in vitro methods to date emerge predominantly as a by-product of basic research. A considerable push might now be given by the structured search for new methods with a spill-over for research-based up-to-date teaching. (b) The field of alternative methods is more than a panel of advanced in vitro techniques: A culture of systematic evaluation and validation of in vitro tests has been developed, which has bearing far beyond the replacement of animal experiments. In vitro systems inherently prone to artefacts require the highest level of quality control and

  5. Advisory Committee Handbook.

    Science.gov (United States)

    Black Hawk Coll., Moline, IL.

    An advisory committee is generally comprised of persons outside the education profession who have specialized knowledge in a given area. The committee advises, makes recommendations, and gives service to the college and its students, instructors, and administrators. At Black Hawk College, there are four types of advisory committees: community,…

  6. 77 FR 39680 - Folding Metal Tables and Chairs From the People's Republic of China: Final Results of Antidumping...

    Science.gov (United States)

    2012-07-05

    ... Metal Tables and Chairs From the People's Republic of China: Final Results of Antidumping Duty... review of the antidumping duty order on folding metal tables and chairs from the People's Republic of... ``Final Results of Review'' section below. \\1\\ See Folding Metal Tables and Chairs From the People's...

  7. 76 FR 72903 - Folding Metal Tables and Chairs From the People's Republic of China: Notice of Correction to the...

    Science.gov (United States)

    2011-11-28

    ... International Trade Administration Folding Metal Tables and Chairs From the People's Republic of China: Notice... the antidumping duty order on folding metal tables and chairs from the People's Republic of China...'').'' \\2\\ \\1\\ See Folding Metal Tables and Chairs From the People's Republic of China: Final Results of...

  8. Effect of chair types on work-related musculoskeletal discomfort during vaginal surgery.

    Science.gov (United States)

    Singh, Ruchira; Carranza Leon, Daniel A; Morrow, Melissa M; Vos-Draper, Tamara L; Mc Gree, Michaela E; Weaver, Amy L; Woolley, Sandra M; Hallbeck, Susan; Gebhart, John B

    2016-11-01

    Evidence supports that surgeons are at high risk for work-related musculoskeletal disorders. The objective of the study was to compare the effect of different chairs on work-related musculoskeletal discomfort for surgeons during vaginal operations. This crossover study randomly assigned 4 surgeons to 4 chair types using a 4 × 4 Latin square model: a conventional round stool, a round stool with a backrest, a saddle chair with a backrest, and a Capisco chair. Subjective assessments of surgeon discomfort were performed with a validated body discomfort survey, and workload was assessed with the surgical task load index. The objective postural load was quantified with inertial measurement units of the modified rapid upper limb assessment limits. Subjective and objective assessments of chair comfort were performed with an 11 point scale and seat interface pressure-mapped distributions, respectively. The primary outcome was the difference in body discomfort scores between pre- and postsurgery measurements. Secondary outcomes were the differences in chair comfort scores, postural load, and seating interface pressure-mapped distribution. For each outcome, comparisons among the chair types were based on fitting a linear mixed model that handled the surgeon as a random effect and the chair type as a fixed effect. Data were collected for 48 vaginal procedures performed for pelvic organ prolapse. Mean (SD) duration of surgery was 122.3 (25.1) minutes. Surgeons reported body discomfort during 31 procedures (67.4%). Subjective increase in discomfort from the preoperative state was noted most commonly in the lower back (n = 14, 30.4%), followed by right shoulder (n = 12, 26.1%), upper back (n = 8, 17.4%), hips and buttocks (n = 7, 15.2%), left shoulder (n = 6, 13.0%), right or left thigh (n = 6, 13.0%), and neck (n = 6, 13.0%). Pre- and postsurgery body discomfort scores did not differ with respect to chair type. Chair discomfort scores for the round stool and the saddle

  9. 75 FR 26320 - Fourteenth Plenary Meeting, RTCA Special Committee 205/EUROCAE WG 71: Software Considerations in...

    Science.gov (United States)

    2010-05-11

    ....--Lunch 1:30 p.m.--Sub-Group Break Out Sessions 14:45 p.m.--Break 3 p.m.--Mandatory Paper Reading Session... Paper Reading Session 5 p.m.--Close 5 p.m.--Executive Committee and SG Chairs/Secretaries Meeting Day 5... Meeting 3 p.m.--Break 3:15 p.m.--Plenary Session: Text Acceptance (for papers posted, commented on and...

  10. Evaluation in health promotion: thoughts from inside a human research ethics committee.

    Science.gov (United States)

    Allen, Judy; Flack, Felicity

    2015-12-01

    Health promotion research, quality improvement and evaluation are all activities that raise ethical issues. In this paper, the Chair and a member of human resear ch ethics committees provide an insiders' point of view on how to demonstrate ethical conduct in health promotion research and quality improvement. Several common issues raised by health promotion research and evaluation are discussed including researcher integrity, conflicts of interest, use of information, consent and privacy.

  11. SU-C-19A-05: Treatment Chairs for Modern Radiation Therapy Treatments

    Energy Technology Data Exchange (ETDEWEB)

    Court, L; Fullen, D; Tharp, K; Palmer, J; Ungchusri, G; Reyes, L; Tong, T; Nguyen, S; Phillips, T; Balter, P [UT MD Anderson Cancer Center, Houston, TX (United States)

    2014-06-15

    Purpose: Treating patients in a seated position has potential advantages including improved comfort, increased lung volume, and reduced respiratory motion. We compared chair designs for head and neck, thoracic and breast patients for use with either IGRT linacs or a proposed low-cost fixed horizontal beam-line machine. Methods: Three treatment chairs were designed and constructed. Two of the chairs are based on a massage-chair, with the patient angled slightly forwards and knee rests used to minimize intra-fraction slouch. The third chair design is more conventional; the patient is angled backwards, with indexed positioning devices and the ability to attach thermoplastic masks. Patient geometries, including PTV location and patient sizes, were extracted from 137 CTs of past patients were used to model the probability of collision between the patient and the linac for various seated positions. All chairs were designed around the weight limits for couches on our linacs. At the time of writing we have just received IRB approval for imaging studies to evaluate comfort, and intra- and interfraction reproducibility. Results: The geometric analysis showed that head and neck patients and thoracic patients could be treated without collision. However, there is very limited space between the patient and the treatment/imaging devices, so careful design of the chair is essential. The position of the treatment target and extended arm positioning means that this is a particular concern for thoracic and breast patients. This was demonstrated for one of the prototype chairs designed for breast treatment where the arm holders would collide with the kV detector. The extra clearance of a dedicated fixed-beam linac would overcome these difficulties. Intra- and inter-fraction reproducibility results will be presented at the meeting. Conclusion: To take advantage of the clinical advantages of seated treatments, appropriate treatment chairs are needed. A dedicate fixed-beam linac may

  12. Demographic and Personal Characteristics of Male and Female Chairs in Academic Psychiatry.

    Science.gov (United States)

    Doyle, Marley; Pederson, Aderonke; Meltzer-Brody, Samantha

    2016-06-01

    Despite the strong representation of female psychiatrists in residency and early-career positions, the number of female faculty sharply decreases in tenured or executive leadership positions. Why there exists a marked change in representation at the level of senior leadership within academic psychiatry is unclear. The authors investigated the causative factors contributing to this observation and gathered information about the personal characteristics of women in executive leadership roles. The authors surveyed psychiatry chairs at academic institutions. They identified all female chairs and randomly selected a group of male chairs to serve as a control group. The survey assessed perceived barriers, strengths, and weaknesses and differences in demographics and leadership styles between female and male chairs. Ten percent of psychiatry chairs were female. Male chairs were more likely than female chairs to head large departments (p = 0.02, confidence interval (CI) -17.1-69.1) and had a higher H-index (p = 0.001, CI 6.6-37.2). Female chairs were more likely than male chairs to perceive barriers in their career development (p = 0.01, CI 0.7-2.2), citing little or no mentorship (p = 0.04), gender discrimination (p = 0.0001), and family obligations (p = 0.001) more often. Academic institutions must incorporate programs to decrease barriers and work to achieve equitable representation of women in upper-level leadership positions. Moreover, academic medicine must evolve to cultivate a family-friendly environment that successfully supports both genders.

  13. Inter-Society Research Committee

    International Nuclear Information System (INIS)

    Akiyama, Mamoru; Higuchi, Masahisa.

    1996-01-01

    World-wide tendencies and circumstances for nuclear power cannot be said to be moving full of sail with a favorable wind, due to nuclear power plant accidents and comparatively little economical benefit. The present Nuclear Power Plant situation is that some personnel understand a need for the development from the viewpoint of efficient energy usage in the world and environmental problems like global warming. At the same time others oppose future nuclear development from the viewpoint of safety problems and economic cost. These issues may end nuclear development worldwide. Nuclear development must be considered from an international viewpoint and other various aspects. Therefore, all countries concerned should cooperative in the adjustment of research carried out by each country. Nuclear power's future must be efficient in the utilization of limited resources (money, manpower and facilities). It is concluded that the ISRC should only discuss technical matters on nuclear engineering, independent from political influence. Societies agreeing to this idea, provide the ISRC with money and/or manpower and/or facilities. The ISRC will consist of a research program committee and research task forces. Members of the Research Program Committee are the chairmen of the research task forces who are also society representatives. The Committee will discuss research programs and resources. The research task forces will consist of one society representative chairman and specialists on the program

  14. Trapezius Muscle Activity in using Ordinary and Ergonomically Designed Dentistry Chairs

    Directory of Open Access Journals (Sweden)

    O Haddad

    2012-03-01

    Full Text Available Background: Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. Objective: We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. Methods: The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Results: Normalized EMG data showed significant reduction (p<0.05 in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Conclusion: Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

  15. The Trial: A Parable of a Department Chair before the Law of the Budget.

    Science.gov (United States)

    Beja, Morris

    1994-01-01

    Discusses the seemingly contradictory nature of chairing an English department by highlighting the opposing impulses faced, especially as related to funding. Presents the situation in the form of a parable similar to a work by Franz Kafka. (HB)

  16. 76 FR 45845 - Notice of Issuance of Final Determination Concerning a Certain Patient Transport Chair

    Science.gov (United States)

    2011-08-01

    ... wheelchair, the patient transport chair can be maneuvered through tight or crowded hallways, elevators and... potentiometer subassembly, a speed potentiometer subassembly, a brake cable subassembly, a black horn cable...

  17. 77 FR 18242 - Environmental Management Site-Specific Advisory Board Chairs

    Science.gov (United States)

    2012-03-27

    ...' Roundtable Discussion: Product Development and Summary Public Participation: The EM SSAB Chairs welcome the... a fashion that will facilitate the orderly conduct of business. Individuals wishing to make public...

  18. A survey of the bacterial diversity in the cup filler of dental chair units.

    Science.gov (United States)

    Silva, Vítor; Figueira, Vânia; Figueiral, Helena; Manaia, Célia M

    2011-07-01

    Water from the cup filler of dental chair units (CFDC) was observed to contain sphingomonads, environmental mycobacteria and methylobacteria, among other minor bacteria. Some of the bacteria detected are recognized opportunistic pathogens. Some of these, tended to persist over time.

  19. Association of Medical School Pediatric Department Chairs Principles of Lifelong Learning in Pediatric Medicine.

    Science.gov (United States)

    Opipari, Valerie P; Daniels, Stephen R; Wilmott, Robert W; Jacobs, Richard F

    2016-11-01

    Pediatric general and subspecialty care requires continuous effort to maintain knowledge and competencies in clinical practice. Equally important are efforts by investigators and educators to maintain knowledge and competencies in the conduct of research and training. The Association of Medical School Pediatric Department Chairs initiated a survey in July 2015 to define principles of lifelong learning in pediatric medicine and determine the approaches and strategies used by chairs to assess knowledge and competence across the care, research, and teaching missions. A total of 101 of 142 chairs (71%) completed the survey. Six of 7 proposed principles were endorsed by 84% to 96% of Association of Medical School Pediatric Department Chairs members. The focus areas included individual accountability, individually relevant activities, use of evidence-based guidelines/national standards, gaining cognitive expertise, learning as a continuous effort, affordability, and focus on individual understanding. The chairs endorsed a requirement for evidence of lifelong learning, competence, and compliance by all faculty members in clinical (n = 89 [88%]), research (n = 63 [62%]), and educational (n = 85 [84%]) practice. The survey identified the strategies to assess lifelong learning and faculty competence and compliance in clinical, research, and educational roles. Across missions, chairs endorsed an expectation for individual responsibility supplemented by formal evaluation practices and institutional and regulatory office oversight. While chairs endorsed an important role for the American Board of Pediatrics in assessing and verifying lifelong learning, knowledge, and competence in general and specialty certification, most (n = 91 [90%]) endorsed a need to revise current board requirements to better emphasize closing gaps in knowledge and using approaches that are evidence-based. This study provides the perspectives of pediatric department chairs on principles

  20. Advancing Women's Health and Women's Leadership With Endowed Chairs in Women's Health.

    Science.gov (United States)

    Carnes, Molly; Johnson, Paula; Klein, Wendy; Jenkins, Marjorie; Bairey Merz, C Noel

    2017-02-01

    Gender-based bias and conflation of gender and status are root causes of disparities in women's health care and the slow advancement of women to leadership in academic medicine. More than a quarter of women physicians train in internal medicine and its subspecialties, and women physicians almost exclusively constitute the women's health focus within internal medicine. Thus, internal medicine has considerable opportunity to develop women leaders in academic medicine and promote women's health equity.To probe whether holding an endowed chair-which confers status-in women's health may be an effective way to advance women leaders in academic medicine and women's health, the authors explored the current status of endowed chairs in women's health in internal medicine. They found that the number of these endowed chairs in North America increased from 7 in 2013 to 19 in 2015, and all were held by women. The perceptions of incumbents and other women's health leaders supported the premise that an endowed chair in women's health would increase women's leadership, the institutional stature of women's health, and activities in women's health research, education, and clinical care.Going forward, it will be important to explore why not all recipients perceived that the endowed chair enhanced their own academic leadership, whether providing women's health leaders with fundraising expertise fosters future success in increasing the number of women's health endowed chairs, and how the conflation of gender and status play out (e.g., salary differences between endowed chairs) as the number of endowed chairs in women's health increases.

  1. Designing leadership chairs: Experiments with affirmative critique of leadership and environmentality

    Directory of Open Access Journals (Sweden)

    Malou Juelskjær

    2016-12-01

    Full Text Available Through a methodology of having students ‘design’ leadership chairs, we investigate how contemporary leadership and governing operate by orchestrating affects and strategically shaping the physical environment in order to transform and shape intensities, desires, atmospheres, and social relations. By presenting a pedagogical framing as ‘a posthuman sensorium’, with its design of leadership chairs and art of conversation, we invite engagement with dilemmas and problems of contemporary organizing processes as a careful affirmative critique.

  2. Severe cerebral desaturation during shoulder arthroscopy in the beach-chair position

    DEFF Research Database (Denmark)

    Dippmann, Christian; Winge, Søren; Nielsen, Henning Bay

    2010-01-01

    During shoulder arthroscopy in the beach-chair position, cerebral ischemia may be a serious complication because prolonged hypotension may affect regional cerebral oxygen supply. We present the cases of 2 patients in whom a reduction in mean arterial pressure after anesthesia provoked a decrease...... cerebral oxygenation. During surgery in the beach-chair position, hypotension must be avoided, and in all patients regional, cerebral oxygenation should be monitored and optimized....

  3. Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

    Science.gov (United States)

    Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur

    2015-01-01

    Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children’s age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6–9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children’s ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement. PMID:26053154

  4. Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children.

    Science.gov (United States)

    Purwaningrum, Lu'lu'; Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur; Muraki, Satoshi

    2015-01-01

    Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children's age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6-9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children's ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement.

  5. Evolution of IEC/TC 45 works and its sub-committees from 1960 to 1983

    International Nuclear Information System (INIS)

    Weill, J.

    1983-10-01

    The IEC, founded in 1906, is an independent international standards organization. Its standardization work deals with almost all branches of electrotechnology in the electrotechnical, electronical and data-processing field, covering all applications, as for example telecommunications and nuclear energy. The IEC Central Office is situated in Geneva (Switzerland). The Technical Committee No. 45 was set up in 1960 at the IEC general meeting in New Delhi, with the scope as given in the IEC Directory. Its revised scope is under consideration in the Committee of Action of the IEC and reads: ''To prepare international standards relating to electrical and electronic equipment and systems specific to nuclear applications''. The chart shows the organigram of the Technical Committee which comprises about 75 experts in the nuclear field from about 20 industrial countries. We can see here the standard diagram of a Technical Committee with its Sub-committees and Working Groups. The meetings are held in a member country at the request of its National Committee. One shows the places of the plenary meetings of TC 45 as well as the meetings of its Sub-committees and their Working Groups held till now. The Technical Committee 45 has in addition to its seven Working Groups also two Sub-committees having several further Working Groups of their own. The Sub-committee 45 A ''Reactor Instrumentation''. The Sub-committee 45 B ''Radiation protection instrumentation''. Till now TC 45 has published about 85 standards. Regarding work in preparation, one shows the present and future work within the Technical Committee and its Sub-committees. Impact of works and liaisons is briefly discussed [fr

  6. Report on the third meeting of the project advisory committee (technical) for IAEA/WHO Project EGY/6/004 (Egyptian Cancer Project) 27-29 April 1985, at NEMROCK, Cairo. PACT(3)

    International Nuclear Information System (INIS)

    Taylor, C.B.G.

    1985-06-01

    The Project was launched in March 1983, with the first meeting of the Committee (PACT(I)). It was planned for a duration of four years. Now, after two years experience, PACT(III) met to review results so far and to advise on actions for the remaining two years. Appendix 1 lists those present at the meeting. Since 1983 a Pilot Project has been running at NEMROCK, the Nuclear Medicine and Radiation Oncology Centre at Cairo University Hospital, at which the Project is based. Two training courses have been given, in November 1983 and November 1984, and treatment has been given using protocols developed under the project. PACT(III) examined clinical results obtained so far and made recommendations for the extension of the scheme to other hospitals in Egypt

  7. Respiratory chest movement measurement as a chair quality indicator – preliminary observations

    Science.gov (United States)

    Szczygieł, Elżbieta; Zielonka, Katarzyna; Mazur, Tadeusz; Mętel, Sylwia; Golec, Joanna

    2015-01-01

    Regardless of the constantly increasing time man is spending in a sitting position, there is still a lack of objective chair quality assessment criteria. The aim of this paper is to find the answer to whether respiratory chest movement measurements can be a chair quality indicator. The study included 34 participants (mean 34.7 years ± 5.2). Their chest movements were assessed using respiratory inductive plethysmography while sitting on two subsequent chairs. Significant differences in chest movements depending on chair type were observed concerning the breathing duct (upper and lower) and breathing movement amplitude. The amplitude of the upper respiratory track in the first chair was higher (239.4 mV) compared with the second seat (207.3 mV) (p = .018). The analyzed parameters of respiratory chest movement may become a helpful indicator for design and selection of chairs which enable people to both work and relax in the most ergonomic conditions. PMID:26323780

  8. [Measurement of muscular activity by surface electromyography during use of an emergency evacuation chair].

    Science.gov (United States)

    Caballero Martín, Elena; Gallego Fernández, Yolanda; Molina, Josep María

    2012-01-01

    To compare the different techniques used by paramedics in handling an emergency evacuation chair and to identify themore ergonomically favourable technique, based on an analysis ofmuscular activity using surface electromyography. The trial was based on descending stairs, through four possible arrangements for the same transport operation, where the study variables were: worker anthropometrics (5th and 95th percentiles, corresponding to the extremes of the normal height-weight distribution curve), worker location during chair transport (upper or lower end of the chair), and the position of the individual at the lower end (facing front or backwards during descent). For both workers participating in the study, the more favourable working position during chair descent was at the lower end of the chairwhile facing forward, as this was associated with less muscular activity. In general, physical demands on the various muscles studied was greater for the worker corresponding to the 5th percentile (i.e., lower height-weight), except for the paravertebral musculature which, for certain maneuvers involving manipulation was significantly greater than the 95th percentile. When descending stairs while transporting an emergency evacuation chair, the position involving least muscular activity is located at the lower end of the chair, and descending while facing forwards. Copyright belongs to the Societat Catalana de Seguretat i Medicina del Treball.

  9. Developing a Job Description for a Vice Chair of Education in Radiology: The ADVICER Template.

    Science.gov (United States)

    Lewis, Petra J; Probyn, Linda; McGuinness, Georgeann; Nguyen, Jeremy; Mullins, Mark E; Resnik, Charles; Oldham, Sandra

    2015-07-01

    The newly formed Alliance of Directors and Vice Chairs of Education in Radiology (ADVICER), a group within the Alliance for Clinician Educators in Radiology, identified an acute need for a generic job description template for Vice Chairs of Education in Radiology, a role that is being developed in many academic Departments of Radiology. Eighty-three percent of current members who responded to a survey had no detailed job description, and over half had no job description at all. Having a comprehensive and detailed job description is vital to developing this key position. Using the results of a survey sent to ADVICER members and seven Education Vice Chair job descriptions provided by members, the authors developed a detailed job description encompassing all potential elements of this position. Only 17% of survey respondents had a detailed job description. The role of an Education Vice Chair varies significantly between institutions in its scope and level of responsibilities. The resultant generic job description that was devised is intended to provide a template that would be modified by the candidate or the Department Chair. It is unlikely that any one individual would perform all the described activities. ADVICER has developed a comprehensive, flexible job description for Vice Chair of Education in Radiology that can be adapted by institutions as appropriate. It can be downloaded from http://aur.org/ADVICER/. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

  10. Accuracy of a feedback device for cardiopulmonary resuscitation on a dental chair.

    Science.gov (United States)

    Segal, Nicolas; Laurent, Florian; Maman, Louis; Plaisance, Patrick; Augustin, Pascal

    2012-11-01

    Conflicting studies exist about the effectiveness of cardiopulmonary resuscitation (CPR) on a dental chair. In some situations, dental surgeons are obliged to perform CPR with the patient on the chair. Feedback devices are supposed to guide the compression depth in order to improve the quality of CPR, but some devices are based on an accelerometer that can theoretically report erroneous results because of the lack of rigidity of a dental chair. The aim of this study was to evaluate the accuracy of these devices to guide chest compressions on a dental chair. A prospective, randomised, crossover, equivalence/non-inferiority study was conducted to compare the values of compression depths provided by the feedback device (Real CPR Help(®), delivered by Zoll© Medical Corporation, Chelmsford, MA, USA) with the real measurements provided by the manikin (Resusci Anne(®) Advanced SkillTrainer, Laerdal Medical AS©, Norway). Chest-compression-only CPR was performed by 15 Basic Life Support instructors who carried out two rounds of continuous CPR for 2 min each. Data were analysed with a correlation test, a Bland-Altman method and a Wilcoxon test. Statistical significance was defined as pdental chair and on the floor (pdental chairs.

  11. Annual Energy Savings and Thermal Comfort of Autonomously Heated and Cooled Office Chairs

    Energy Technology Data Exchange (ETDEWEB)

    Carmichael, Scott [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States); Robertson, Joseph [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chin, Justin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Christensen, Dane [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Jacquelyn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Arent, Doug [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-07-01

    Energy use in offices buildings is largely driven by air conditioning demands. But the optimal temperature is not the same for all building occupants, leading to the infamous thermostat war. And many occupants have independently overcome building comfort weaknesses with their own space heaters or fans. NREL tested is a customized office chair that automatically heats and cools the occupant along the seat and chair back according to the occupants' personal preferences. This product is shown to deliver markedly better comfort at room temperatures well above typical office cooling setpoints. Experimental subjects reported satisfaction in these elevated air temperatures, partly because the chair's cooling effect was tuned to their own individual needs. Simulation of the chair in office buildings around the U.S. shows that energy can be saved everywhere, with impacts varying due to the climate. Total building HVAC energy savings exceeded 10% in hot-dry climate zones. Due to high product cost, simple payback for the chair we studied is beyond the expected chair life. We then understood the need to establish cost-performance targets for comfort delivery packages. NREL derived several hypothetical energy/cost/comfort targets for personal comfort product systems. In some climate regions around the U.S., these show the potential for office building HVAC energy savings in excess of 20%. This report documents this research, providing an overview of the research team's methods and results while also identifying areas for future research building upon the findings.

  12. An Evaluation of the Middle East Research Training Initiative Tool in Assessing Effective Functioning of Research Ethics Committees.

    Science.gov (United States)

    Jaoko, Walter; Bukusi, Elizabeth; Davis, Arlene M

    2016-10-01

    The effective functioning of a research ethics committee (REC) can be evaluated using self-assessment tools. The Middle East Research Ethics Training Initiative (MERETI) tool can be used by one member, typically the Chair, to score an REC. The consistency of these scores across several members of an REC has never been evaluated. This study examined whether results would be consistent irrespective of who conducts the assessment. One REC's effective functioning was assessed by several members ( n = 13). The Chair's scores were compared with scores of other members in relation to their duration of REC membership, research ethics training, gender, and employer's institutional affiliation to the REC. The Chair's overall score was higher than the other members' scores by 11%. No significant differences in scores were obtained in relation to duration of REC membership ( p = .72), interval since last research ethics training ( p = .94), and gender ( p = .27). The MERETI tool is thus consistent irrespective of who performs the assessment.

  13. 75 FR 60430 - Federal Advisory Committee; Threat Reduction Advisory Committee

    Science.gov (United States)

    2010-09-30

    ... of the Secretary Federal Advisory Committee; Threat Reduction Advisory Committee AGENCY: Office of... meeting. SUMMARY: Under the provisions of the Federal Advisory Committee Act of 1972 (5 U.S.C., Appendix... announces a meeting of the Threat Reduction Advisory Committee (hereafter referred to as ``the Committee...

  14. Committee Reports, May 2008

    Science.gov (United States)

    2008-08-01

    The Division's Executive Committee conducted several items of business at the New Orleans meeting. Elsewhere in this issue [see p 1032] is a listing of the candidates for Division offices for Fall 2008 election, approved by the Committee and later affirmed at the Division business meeting. Among items of specific interest to Division members is a plan to have the Journal of Chemical Education send an announcement to members when each issues goes online, and the Committee approved this use of the Division email list. It also approved plans presented by Amina El-Ashmawy and the BCCE committee to proceed with a bid from Pennsylvania State University for the 2012 BCCE.

  15. Does Using a Chair Backrest or Reducing Seated Hip Flexion Influence Trunk Muscle Activity and Discomfort? A Systematic Review.

    Science.gov (United States)

    Curran, Máire; O'Sullivan, Leonard; O'Sullivan, Peter; Dankaerts, Wim; O'Sullivan, Kieran

    2015-11-01

    This paper systematically reviews the effect of chair backrests and reducing seated hip flexion on low back discomfort (LBD) and trunk muscle activation. Prolonged sitting commonly exacerbates low back pain (LBP). Several modifications to seated posture and chair design have been recommended, including using chairs with backrests and chairs that reduce hip flexion. Electronic databases were searched by two independent assessors. Part 1 of this review includes 26 studies comparing the effect of sitting with at least two different hip angles. In Part 2, seven studies that compared the effect of sitting with and without a backrest were eligible. Study quality was assessed using the PEDro scale. Significant confounding variables and a relatively small number of randomized controlled trials (RCTs) involving people with LBP complicates analysis of the results. There was moderate evidence that chair backrests reduce paraspinal muscle activation, and limited evidence that chair backrests reduce LBD. There was no evidence that chairs involving less hip flexion reduce LBP or LBD, or consistently alter trunk muscle activation. However, participants in several studies subjectively preferred the modified chairs involving less hip flexion. The limited evidence to support the use of chairs involving less seated hip flexion, or the effect of a backrest, is consistent with the limited evidence that other isolated chair design features can reduce LBP. LBP management is likely to require consideration of several factors in addition to sitting position. Larger RCTs involving people with LBP are required. © 2015, Human Factors and Ergonomics Society.

  16. Effect of a kneeling chair on lumbar curvature in patients with low back pain and healthy controls: A pilot study.

    Science.gov (United States)

    Vaucher, Matthieu; Isner-Horobeti, Marie-Eve; Demattei, Christophe; Alonso, Sandrine; Hérisson, Christian; Kouyoumdjian, Pascal; van Dieën, Jaap H; Dupeyron, Arnaud

    2015-06-01

    The concept of an ideal sitting posture is often used in practice but lacks a basis in evidence. We designed a cross-sectional, comparative, matched study to determine the effects of chair and posture on lumbar curvature in 10 patients with chronic non-specific low back pain (CLBP; mean pain duration 24 ± 18 months) and 10 healthy matched controls. Pelvic incidence, sacral slope and lumbar curvature were measured on computed radiographs by 2 blinded clinicians for subjects in 2 postures (upright vs slumped sitting) and on 2 chairs (usual flat chair vs kneeling chair). The reliability of measures was excellent (intraclass correlation coefficient>0.9). As hypothesized, the expected sacral slope and lumbar lordosis changed between standing and sitting on a kneeling chair as compared with a usual chair (Pchairs and postures for lumbar lordosis (P=0.02) indicated more pronounced effects of the chair in slumped sitting. Therefore, lumbar lordosis was reduced less when sitting on a kneeling chair as compared with a usual chair. Although healthy subjects showed more reduction in lordosis between standing and sitting, the chair effect was found in both CLBP patients and healthy subjects. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  17. The usage of a hand-made chair at home for children with moderate to severe cerebral palsy: preliminary study.

    Science.gov (United States)

    Siritaratiwat, Wantana; Inthachom, Rumrada; Warnset, Somporn

    2012-02-01

    Specially designed chairs are expensive. A hand-made chair easily constructed from recycled material can be an alternative option. However data on the feasibility of hand-made chair use at home is limited. The present study aimed to explore the usage of a hand-made chair at home in children with moderate to severe motor disabilities. Seventeen children with cerebral palsy were recruited. Main caregivers were interviewed regarding the possibility of using the chair at home. Home visits and observations were also performed to explain how the chair had been used at home. Nine children (52.9%) used the chair everyday. Seven of these nine children were seated at least 30 minutes each time and two to three times per day. The total time that children spent on the hand-made chair each day ranged from 10 to 90 minutes. The severity of disability and main caregivers' workload may explain an inadequate usage of the hand-made chair. A few modifications may help to improve the applicability of the hand-made chair.

  18. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... in cooperation and development of ICTs seems to pass unnoticed. However, since they are aligned into ICTs, technicities impact innovation....

  19. Quality Improvement Practices in Academic Emergency Medicine: Perspectives from the Chairs

    Directory of Open Access Journals (Sweden)

    DelliFraine, Jami L

    2010-12-01

    Full Text Available Objective: To assess academic emergency medicine (EM chairs’ perceptions of quality improvement (QI training programs.Methods: A voluntary anonymous 20 item survey was distributed to a sample of academic chairs of EM through the Association of Academic Chairs of Emergency Medicine. Data was collected to assess the percentage of academic emergency physicians who had received QI training, the type of training they received, their perception of the impact of this training on behavior, practice and outcomes, and any perceived barriers to implementing QI programs in the emergency department.Results: The response rate to the survey was 69% (N = 59. 59.3% of respondents report that their hospital has a formal QI program for physicians. Chairs received training in a variety of QI programs. The type of QI program used by respondents was perceived as having no impact on goals achieved by QI (χ2 = 12.382; p = 0.260, but there was a statistically significant (χ2 = 14.383; p = 0.006 relationship between whether or not goals were achieved and academic EM chairs’ perceptions about return on investment for QI training. Only 22% of chairs responded that they have already made changes as a result of the QI training. 78.8% of EM chairs responded that quality programs could have a significant positive impact on their practice and the healthcare industry. Chairs perceived that QI programs had the most potential value in the areas of understanding and reducing medical errors and improving patient flow and throughput. Other areas of potential value of QI include improving specific clinical indicators and standardizing physician care.Conclusion: Academic EM chairs perceived that QI programs were an effective way to drive needed improvements. The results suggest that there is a high level of interest in QI but a low level of adoption of training and implementation.[West J Emerg Med. 2010; 11(5:479-485.

  20. Analysis of plethysmographic waveform changes induced by beach chair positioning under general anesthesia.

    Science.gov (United States)

    Zhu, Richard; Atteya, Gourg; Shelley, Kirk H; Silverman, David G; Alian, Aymen A

    2014-12-01

    During shoulder surgery, patients typically are placed in the beach chair position. In rare cases, this positioning has resulted in devastating outcomes of postoperative cerebral ischemia (Cullen and Kirby in APSF Newsl 22(2):25-27, 2007; Munis in APSF Newsl 22(4):82-83, 2008). This study presents a method to noninvasively and continuously hemodynamically monitor patients during beach chair positioning by using the photoplethysmograph signal recorded from a commercial pulse oximeter. Twenty-nine adults undergoing shoulder surgery were monitored before and after beach chair positioning with electrocardiogram, intermittent blood pressure, end tidal carbon dioxide, and photoplethysmograph via Nellcor finger pulse oximeter. Fast Fourier transform (FFT) was used to perform frequency-domain analysis on the photoplethysmograph (PPG) signal for data segments taken 80-120 s before and after beach chair positioning. The amplitude density of respiration-associated PPG oscillations was quantified measuring the height of the FFT peak at respiratory frequency. Results were reported as (median, interquartile range) and statistical analysis was performed using Wilcoxon sign rank test. Data were also collected when vasoactive drugs phenylephrine and ephedrine were used to maintain acceptable mean arterial pressure during a case. With beach chair positioning, all subjects who did not receive vasoactive drugs showed an increase in the FFT amplitude density of respiration-associated PPG oscillations (p chair position than blood pressure or heart rate. With vasoactive drugs, pulse-associated PPG oscillations decreased only with phenylephrine while respiration-associated oscillations did not change. Frequency domain analysis of the PPG signal may be a better tool than traditional noninvasive hemodynamic parameters at monitoring patients during beach chair position surgery.