Design, Modelling and Analysis of a Workflow Reconfiguration

DEFF Research Database (Denmark)

Mazzara, Manuel; Abouzaid, Faisal; Dragoni, Nicola

2011-01-01

This paper describes a case study involving the reconfiguration of an office workflow. We state the requirements on a system implementing the workflow and its reconfiguration, and describe the system’s design in BPMN. We then use an asynchronous pi-calculus and Web.1 to model the design and to ve......This paper describes a case study involving the reconfiguration of an office workflow. We state the requirements on a system implementing the workflow and its reconfiguration, and describe the system’s design in BPMN. We then use an asynchronous pi-calculus and Web.1 to model the design...

Precise Quantitative Analysis of Probabilistic Business Process Model and Notation Workflows

DEFF Research Database (Denmark)

Herbert, Luke Thomas; Sharp, Robin

2013-01-01

We present a framework for modeling and analysis of real-world business workflows. We present a formalized core subset of the business process modeling and notation (BPMN) and then proceed to extend this language with probabilistic nondeterministic branching and general-purpose reward annotations...... the entire BPMN language, allow for more complex annotations and ultimately to automatically synthesize workflows by composing predefined subprocesses, in order to achieve a configuration that is optimal for parameters of interest....

Virtual-screening workflow tutorials and prospective results from the Teach-Discover-Treat competition 2014 against malaria [version 1; referees: 2 approved

Directory of Open Access Journals (Sweden)

Sereina Riniker

2017-07-01

Full Text Available The first challenge in the 2014 competition launched by the Teach-Discover-Treat (TDT initiative asked for the development of a tutorial for ligand-based virtual screening, based on data from a primary phenotypic high-throughput screen (HTS against malaria. The resulting Workflows were applied to select compounds from a commercial database, and a subset of those were purchased and tested experimentally for anti-malaria activity. Here, we present the two most successful Workflows, both using machine-learning approaches, and report the results for the 114 compounds tested in the follow-up screen. Excluding the two known anti-malarials quinidine and amodiaquine and 31 compounds already present in the primary HTS, a high hit rate of 57% was found.

Improved Screening Mammogram Workflow by Maximizing PACS Streamlining Capabilities in an Academic Breast Center.

Science.gov (United States)

Pham, Ramya; Forsberg, Daniel; Plecha, Donna

2017-04-01

The aim of this study was to perform an operational improvement project targeted at the breast imaging reading workflow of mammography examinations at an academic medical center with its associated breast centers and satellite sites. Through careful analysis of the current workflow, two major issues were identified: stockpiling of paperwork and multiple worklists. Both issues were considered to cause significant delays to the start of interpreting screening mammograms. Four workflow changes were suggested (scanning of paperwork, worklist consolidation, use of chat functionality, and tracking of case distribution among trainees) and implemented in July 2015. Timestamp data was collected 2 months before (May-Jun) and after (Aug-Sep) the implemented changes. Generalized linear models were used to analyze the data. The results showed significant improvements for the interpretation of screening mammograms. The average time elapsed for time to open a case reduced from 70 to 28 min (60 % decrease, p workflow for diagnostic mammograms at large unaltered even with increased volume of mammography examinations (31 % increase of 4344 examinations for May-Jun to 5678 examinations for Aug-Sep). In conclusion, targeted efforts to improve the breast imaging reading workflow for screening mammograms in a teaching environment provided significant performance improvements without affecting the workflow of diagnostic mammograms.

Exformatics Declarative Case Management Workflows as DCR Graphs

DEFF Research Database (Denmark)

Slaats, Tijs; Mukkamala, Raghava Rao; Hildebrandt, Thomas

2013-01-01

Declarative workflow languages have been a growing research subject over the past ten years, but applications of the declarative approach in industry are still uncommon. Over the past two years Exformatics A/S, a Danish provider of Electronic Case Management systems, has been cooperating...... with researchers at IT University of Copenhagen (ITU) to create tools for the declarative workflow language Dynamic Condition Response Graphs (DCR Graphs) and incorporate them into their products and in teaching at ITU. In this paper we give a status report over the work. We start with an informal introduction...

RABIX: AN OPEN-SOURCE WORKFLOW EXECUTOR SUPPORTING RECOMPUTABILITY AND INTEROPERABILITY OF WORKFLOW DESCRIPTIONS.

Science.gov (United States)

Kaushik, Gaurav; Ivkovic, Sinisa; Simonovic, Janko; Tijanic, Nebojsa; Davis-Dusenbery, Brandi; Kural, Deniz

2017-01-01

As biomedical data has become increasingly easy to generate in large quantities, the methods used to analyze it have proliferated rapidly. Reproducible and reusable methods are required to learn from large volumes of data reliably. To address this issue, numerous groups have developed workflow specifications or execution engines, which provide a framework with which to perform a sequence of analyses. One such specification is the Common Workflow Language, an emerging standard which provides a robust and flexible framework for describing data analysis tools and workflows. In addition, reproducibility can be furthered by executors or workflow engines which interpret the specification and enable additional features, such as error logging, file organization, optim1izations to computation and job scheduling, and allow for easy computing on large volumes of data. To this end, we have developed the Rabix Executor, an open-source workflow engine for the purposes of improving reproducibility through reusability and interoperability of workflow descriptions.

Closha: bioinformatics workflow system for the analysis of massive sequencing data.

Science.gov (United States)

Ko, GunHwan; Kim, Pan-Gyu; Yoon, Jongcheol; Han, Gukhee; Park, Seong-Jin; Song, Wangho; Lee, Byungwook

2018-02-19

While next-generation sequencing (NGS) costs have fallen in recent years, the cost and complexity of computation remain substantial obstacles to the use of NGS in bio-medical care and genomic research. The rapidly increasing amounts of data available from the new high-throughput methods have made data processing infeasible without automated pipelines. The integration of data and analytic resources into workflow systems provides a solution to the problem by simplifying the task of data analysis. To address this challenge, we developed a cloud-based workflow management system, Closha, to provide fast and cost-effective analysis of massive genomic data. We implemented complex workflows making optimal use of high-performance computing clusters. Closha allows users to create multi-step analyses using drag and drop functionality and to modify the parameters of pipeline tools. Users can also import the Galaxy pipelines into Closha. Closha is a hybrid system that enables users to use both analysis programs providing traditional tools and MapReduce-based big data analysis programs simultaneously in a single pipeline. Thus, the execution of analytics algorithms can be parallelized, speeding up the whole process. We also developed a high-speed data transmission solution, KoDS, to transmit a large amount of data at a fast rate. KoDS has a file transfer speed of up to 10 times that of normal FTP and HTTP. The computer hardware for Closha is 660 CPU cores and 800 TB of disk storage, enabling 500 jobs to run at the same time. Closha is a scalable, cost-effective, and publicly available web service for large-scale genomic data analysis. Closha supports the reliable and highly scalable execution of sequencing analysis workflows in a fully automated manner. Closha provides a user-friendly interface to all genomic scientists to try to derive accurate results from NGS platform data. The Closha cloud server is freely available for use from http://closha.kobic.re.kr/ .

Create, run, share, publish, and reference your LC-MS, FIA-MS, GC-MS, and NMR data analysis workflows with the Workflow4Metabolomics 3.0 Galaxy online infrastructure for metabolomics.

Science.gov (United States)

Guitton, Yann; Tremblay-Franco, Marie; Le Corguillé, Gildas; Martin, Jean-François; Pétéra, Mélanie; Roger-Mele, Pierrick; Delabrière, Alexis; Goulitquer, Sophie; Monsoor, Misharl; Duperier, Christophe; Canlet, Cécile; Servien, Rémi; Tardivel, Patrick; Caron, Christophe; Giacomoni, Franck; Thévenot, Etienne A

2017-12-01

Metabolomics is a key approach in modern functional genomics and systems biology. Due to the complexity of metabolomics data, the variety of experimental designs, and the multiplicity of bioinformatics tools, providing experimenters with a simple and efficient resource to conduct comprehensive and rigorous analysis of their data is of utmost importance. In 2014, we launched the Workflow4Metabolomics (W4M; http://workflow4metabolomics.org) online infrastructure for metabolomics built on the Galaxy environment, which offers user-friendly features to build and run data analysis workflows including preprocessing, statistical analysis, and annotation steps. Here we present the new W4M 3.0 release, which contains twice as many tools as the first version, and provides two features which are, to our knowledge, unique among online resources. First, data from the four major metabolomics technologies (i.e., LC-MS, FIA-MS, GC-MS, and NMR) can be analyzed on a single platform. By using three studies in human physiology, alga evolution, and animal toxicology, we demonstrate how the 40 available tools can be easily combined to address biological issues. Second, the full analysis (including the workflow, the parameter values, the input data and output results) can be referenced with a permanent digital object identifier (DOI). Publication of data analyses is of major importance for robust and reproducible science. Furthermore, the publicly shared workflows are of high-value for e-learning and training. The Workflow4Metabolomics 3.0 e-infrastructure thus not only offers a unique online environment for analysis of data from the main metabolomics technologies, but it is also the first reference repository for metabolomics workflows. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis and classification of oncology activities on the way to workflow based single source documentation in clinical information systems.

Science.gov (United States)

Wagner, Stefan; Beckmann, Matthias W; Wullich, Bernd; Seggewies, Christof; Ries, Markus; Bürkle, Thomas; Prokosch, Hans-Ulrich

2015-12-22

Today, cancer documentation is still a tedious task involving many different information systems even within a single institution and it is rarely supported by appropriate documentation workflows. In a comprehensive 14 step analysis we compiled diagnostic and therapeutic pathways for 13 cancer entities using a mixed approach of document analysis, workflow analysis, expert interviews, workflow modelling and feedback loops. These pathways were stepwise classified and categorized to create a final set of grouped pathways and workflows including electronic documentation forms. A total of 73 workflows for the 13 entities based on 82 paper documentation forms additionally to computer based documentation systems were compiled in a 724 page document comprising 130 figures, 94 tables and 23 tumour classifications as well as 12 follow-up tables. Stepwise classification made it possible to derive grouped diagnostic and therapeutic pathways for the three major classes - solid entities with surgical therapy - solid entities with surgical and additional therapeutic activities and - non-solid entities. For these classes it was possible to deduct common documentation workflows to support workflow-guided single-source documentation. Clinical documentation activities within a Comprehensive Cancer Center can likely be realized in a set of three documentation workflows with conditional branching in a modern workflow supporting clinical information system.

Querying Workflow Logs

Directory of Open Access Journals (Sweden)

Yan Tang

2018-01-01

Full Text Available A business process or workflow is an assembly of tasks that accomplishes a business goal. Business process management is the study of the design, configuration/implementation, enactment and monitoring, analysis, and re-design of workflows. The traditional methodology for the re-design and improvement of workflows relies on the well-known sequence of extract, transform, and load (ETL, data/process warehousing, and online analytical processing (OLAP tools. In this paper, we study the ad hoc queryiny of process enactments for (data-centric business processes, bypassing the traditional methodology for more flexibility in querying. We develop an algebraic query language based on “incident patterns” with four operators inspired from Business Process Model and Notation (BPMN representation, allowing the user to formulate ad hoc queries directly over workflow logs. A formal semantics of this query language, a preliminary query evaluation algorithm, and a group of elementary properties of the operators are provided.

NeuroManager: A workflow analysis based simulation management engine for computational neuroscience

Directory of Open Access Journals (Sweden)

David Bruce Stockton

2015-10-01

Full Text Available We developed NeuroManager, an object-oriented simulation management software engine for computational neuroscience. NeuroManager automates the workflow of simulation job submissions when using heterogeneous computational resources, simulators, and simulation tasks. The object-oriented approach 1 provides flexibility to adapt to a variety of neuroscience simulators, 2 simplifies the use of heterogeneous computational resources, from desktops to super computer clusters, and 3 improves tracking of simulator/simulation evolution. We implemented NeuroManager in Matlab, a widely used engineering and scientific language, for its signal and image processing tools, prevalence in electrophysiology analysis, and increasing use in college Biology education. To design and develop NeuroManager we analyzed the workflow of simulation submission for a variety of simulators, operating systems, and computational resources, including the handling of input parameters, data, models, results, and analyses. This resulted in twenty-two stages of simulation submission workflow. The software incorporates progress notification, automatic organization, labeling, and time-stamping of data and results, and integrated access to Matlab's analysis and visualization tools. NeuroManager provides users with the tools to automate daily tasks, and assists principal investigators in tracking and recreating the evolution of research projects performed by multiple people. Overall, NeuroManager provides the infrastructure needed to improve workflow, manage multiple simultaneous simulations, and maintain provenance of the potentially large amounts of data produced during the course of a research project.

ATLAS Grid Workflow Performance Optimization

CERN Document Server

Elmsheuser, Johannes; The ATLAS collaboration

2018-01-01

The CERN ATLAS experiment grid workflow system manages routinely 250 to 500 thousand concurrently running production and analysis jobs to process simulation and detector data. In total more than 300 PB of data is distributed over more than 150 sites in the WLCG. At this scale small improvements in the software and computing performance and workflows can lead to significant resource usage gains. ATLAS is reviewing together with CERN IT experts several typical simulation and data processing workloads for potential performance improvements in terms of memory and CPU usage, disk and network I/O. All ATLAS production and analysis grid jobs are instrumented to collect many performance metrics for detailed statistical studies using modern data analytics tools like ElasticSearch and Kibana. This presentation will review and explain the performance gains of several ATLAS simulation and data processing workflows and present analytics studies of the ATLAS grid workflows.

Development of a Sampling-Based Global Sensitivity Analysis Workflow for Multiscale Computational Cancer Models

Science.gov (United States)

Wang, Zhihui; Deisboeck, Thomas S.; Cristini, Vittorio

2014-01-01

There are two challenges that researchers face when performing global sensitivity analysis (GSA) on multiscale in silico cancer models. The first is increased computational intensity, since a multiscale cancer model generally takes longer to run than does a scale-specific model. The second problem is the lack of a best GSA method that fits all types of models, which implies that multiple methods and their sequence need to be taken into account. In this article, we therefore propose a sampling-based GSA workflow consisting of three phases – pre-analysis, analysis, and post-analysis – by integrating Monte Carlo and resampling methods with the repeated use of analysis of variance (ANOVA); we then exemplify this workflow using a two-dimensional multiscale lung cancer model. By accounting for all parameter rankings produced by multiple GSA methods, a summarized ranking is created at the end of the workflow based on the weighted mean of the rankings for each input parameter. For the cancer model investigated here, this analysis reveals that ERK, a downstream molecule of the EGFR signaling pathway, has the most important impact on regulating both the tumor volume and expansion rate in the algorithm used. PMID:25257020

Yadage and Packtivity - analysis preservation using parametrized workflows

Science.gov (United States)

Cranmer, Kyle; Heinrich, Lukas

2017-10-01

Preserving data analyses produced by the collaborations at LHC in a parametrized fashion is crucial in order to maintain reproducibility and re-usability. We argue for a declarative description in terms of individual processing steps - “packtivities” - linked through a dynamic directed acyclic graph (DAG) and present an initial set of JSON schemas for such a description and an implementation - “yadage” - capable of executing workflows of analysis preserved via Linux containers.

Biowep: a workflow enactment portal for bioinformatics applications.

Science.gov (United States)

Romano, Paolo; Bartocci, Ezio; Bertolini, Guglielmo; De Paoli, Flavio; Marra, Domenico; Mauri, Giancarlo; Merelli, Emanuela; Milanesi, Luciano

2007-03-08

The huge amount of biological information, its distribution over the Internet and the heterogeneity of available software tools makes the adoption of new data integration and analysis network tools a necessity in bioinformatics. ICT standards and tools, like Web Services and Workflow Management Systems (WMS), can support the creation and deployment of such systems. Many Web Services are already available and some WMS have been proposed. They assume that researchers know which bioinformatics resources can be reached through a programmatic interface and that they are skilled in programming and building workflows. Therefore, they are not viable to the majority of unskilled researchers. A portal enabling these to take profit from new technologies is still missing. We designed biowep, a web based client application that allows for the selection and execution of a set of predefined workflows. The system is available on-line. Biowep architecture includes a Workflow Manager, a User Interface and a Workflow Executor. The task of the Workflow Manager is the creation and annotation of workflows. These can be created by using either the Taverna Workbench or BioWMS. Enactment of workflows is carried out by FreeFluo for Taverna workflows and by BioAgent/Hermes, a mobile agent-based middleware, for BioWMS ones. Main workflows' processing steps are annotated on the basis of their input and output, elaboration type and application domain by using a classification of bioinformatics data and tasks. The interface supports users authentication and profiling. Workflows can be selected on the basis of users' profiles and can be searched through their annotations. Results can be saved. We developed a web system that support the selection and execution of predefined workflows, thus simplifying access for all researchers. The implementation of Web Services allowing specialized software to interact with an exhaustive set of biomedical databases and analysis software and the creation of

Biowep: a workflow enactment portal for bioinformatics applications

Directory of Open Access Journals (Sweden)

Romano Paolo

2007-03-01

Full Text Available Abstract Background The huge amount of biological information, its distribution over the Internet and the heterogeneity of available software tools makes the adoption of new data integration and analysis network tools a necessity in bioinformatics. ICT standards and tools, like Web Services and Workflow Management Systems (WMS, can support the creation and deployment of such systems. Many Web Services are already available and some WMS have been proposed. They assume that researchers know which bioinformatics resources can be reached through a programmatic interface and that they are skilled in programming and building workflows. Therefore, they are not viable to the majority of unskilled researchers. A portal enabling these to take profit from new technologies is still missing. Results We designed biowep, a web based client application that allows for the selection and execution of a set of predefined workflows. The system is available on-line. Biowep architecture includes a Workflow Manager, a User Interface and a Workflow Executor. The task of the Workflow Manager is the creation and annotation of workflows. These can be created by using either the Taverna Workbench or BioWMS. Enactment of workflows is carried out by FreeFluo for Taverna workflows and by BioAgent/Hermes, a mobile agent-based middleware, for BioWMS ones. Main workflows' processing steps are annotated on the basis of their input and output, elaboration type and application domain by using a classification of bioinformatics data and tasks. The interface supports users authentication and profiling. Workflows can be selected on the basis of users' profiles and can be searched through their annotations. Results can be saved. Conclusion We developed a web system that support the selection and execution of predefined workflows, thus simplifying access for all researchers. The implementation of Web Services allowing specialized software to interact with an exhaustive set of biomedical

Next-Generation Climate Modeling Science Challenges for Simulation, Workflow and Analysis Systems

Science.gov (United States)

Koch, D. M.; Anantharaj, V. G.; Bader, D. C.; Krishnan, H.; Leung, L. R.; Ringler, T.; Taylor, M.; Wehner, M. F.; Williams, D. N.

2016-12-01

We will present two examples of current and future high-resolution climate-modeling research that are challenging existing simulation run-time I/O, model-data movement, storage and publishing, and analysis. In each case, we will consider lessons learned as current workflow systems are broken by these large-data science challenges, as well as strategies to repair or rebuild the systems. First we consider the science and workflow challenges to be posed by the CMIP6 multi-model HighResMIP, involving around a dozen modeling groups performing quarter-degree simulations, in 3-member ensembles for 100 years, with high-frequency (1-6 hourly) diagnostics, which is expected to generate over 4PB of data. An example of science derived from these experiments will be to study how resolution affects the ability of models to capture extreme-events such as hurricanes or atmospheric rivers. Expected methods to transfer (using parallel Globus) and analyze (using parallel "TECA" software tools) HighResMIP data for such feature-tracking by the DOE CASCADE project will be presented. A second example will be from the Accelerated Climate Modeling for Energy (ACME) project, which is currently addressing challenges involving multiple century-scale coupled high resolution (quarter-degree) climate simulations on DOE Leadership Class computers. ACME is anticipating production of over 5PB of data during the next 2 years of simulations, in order to investigate the drivers of water cycle changes, sea-level-rise, and carbon cycle evolution. The ACME workflow, from simulation to data transfer, storage, analysis and publication will be presented. Current and planned methods to accelerate the workflow, including implementing run-time diagnostics, and implementing server-side analysis to avoid moving large datasets will be presented.

An automated analysis workflow for optimization of force-field parameters using neutron scattering data

Energy Technology Data Exchange (ETDEWEB)

Lynch, Vickie E.; Borreguero, Jose M. [Neutron Data Analysis & Visualization Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Bhowmik, Debsindhu [Computational Sciences & Engineering Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Ganesh, Panchapakesan; Sumpter, Bobby G. [Center for Nanophase Material Sciences, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Computational Sciences & Engineering Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Proffen, Thomas E. [Neutron Data Analysis & Visualization Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Goswami, Monojoy, E-mail: goswamim@ornl.gov [Center for Nanophase Material Sciences, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States); Computational Sciences & Engineering Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831 (United States)

2017-07-01

Graphical abstract: - Highlights: • An automated workflow to optimize force-field parameters. • Used the workflow to optimize force-field parameter for a system containing nanodiamond and tRNA. • The mechanism relies on molecular dynamics simulation and neutron scattering experimental data. • The workflow can be generalized to any other experimental and simulation techniques. - Abstract: Large-scale simulations and data analysis are often required to explain neutron scattering experiments to establish a connection between the fundamental physics at the nanoscale and data probed by neutrons. However, to perform simulations at experimental conditions it is critical to use correct force-field (FF) parameters which are unfortunately not available for most complex experimental systems. In this work, we have developed a workflow optimization technique to provide optimized FF parameters by comparing molecular dynamics (MD) to neutron scattering data. We describe the workflow in detail by using an example system consisting of tRNA and hydrophilic nanodiamonds in a deuterated water (D{sub 2}O) environment. Quasi-elastic neutron scattering (QENS) data show a faster motion of the tRNA in the presence of nanodiamond than without the ND. To compare the QENS and MD results quantitatively, a proper choice of FF parameters is necessary. We use an efficient workflow to optimize the FF parameters between the hydrophilic nanodiamond and water by comparing to the QENS data. Our results show that we can obtain accurate FF parameters by using this technique. The workflow can be generalized to other types of neutron data for FF optimization, such as vibrational spectroscopy and spin echo.

BioInfra.Prot: A comprehensive proteomics workflow including data standardization, protein inference, expression analysis and data publication.

Science.gov (United States)

Turewicz, Michael; Kohl, Michael; Ahrens, Maike; Mayer, Gerhard; Uszkoreit, Julian; Naboulsi, Wael; Bracht, Thilo; Megger, Dominik A; Sitek, Barbara; Marcus, Katrin; Eisenacher, Martin

2017-11-10

The analysis of high-throughput mass spectrometry-based proteomics data must address the specific challenges of this technology. To this end, the comprehensive proteomics workflow offered by the de.NBI service center BioInfra.Prot provides indispensable components for the computational and statistical analysis of this kind of data. These components include tools and methods for spectrum identification and protein inference, protein quantification, expression analysis as well as data standardization and data publication. All particular methods of the workflow which address these tasks are state-of-the-art or cutting edge. As has been shown in previous publications, each of these methods is adequate to solve its specific task and gives competitive results. However, the methods included in the workflow are continuously reviewed, updated and improved to adapt to new scientific developments. All of these particular components and methods are available as stand-alone BioInfra.Prot services or as a complete workflow. Since BioInfra.Prot provides manifold fast communication channels to get access to all components of the workflow (e.g., via the BioInfra.Prot ticket system: bioinfraprot@rub.de) users can easily benefit from this service and get support by experts. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Enabling Structured Exploration of Workflow Performance Variability in Extreme-Scale Environments

Energy Technology Data Exchange (ETDEWEB)

Kleese van Dam, Kerstin; Stephan, Eric G.; Raju, Bibi; Altintas, Ilkay; Elsethagen, Todd O.; Krishnamoorthy, Sriram

2015-11-15

Workflows are taking an Workflows are taking an increasingly important role in orchestrating complex scientific processes in extreme scale and highly heterogeneous environments. However, to date we cannot reliably predict, understand, and optimize workflow performance. Sources of performance variability and in particular the interdependencies of workflow design, execution environment and system architecture are not well understood. While there is a rich portfolio of tools for performance analysis, modeling and prediction for single applications in homogenous computing environments, these are not applicable to workflows, due to the number and heterogeneity of the involved workflow and system components and their strong interdependencies. In this paper, we investigate workflow performance goals and identify factors that could have a relevant impact. Based on our analysis, we propose a new workflow performance provenance ontology, the Open Provenance Model-based WorkFlow Performance Provenance, or OPM-WFPP, that will enable the empirical study of workflow performance characteristics and variability including complex source attribution.

Design Tools and Workflows for Braided Structures

DEFF Research Database (Denmark)

Vestartas, Petras; Heinrich, Mary Katherine; Zwierzycki, Mateusz

2017-01-01

and merits of our method, demonstrated though four example design and analysis workflows. The workflows frame specific aspects of enquiry for the ongoing research project flora robotica. These include modelling target geometries, automatically producing instructions for fabrication, conducting structural...

The equivalency between logic Petri workflow nets and workflow nets.

Science.gov (United States)

Wang, Jing; Yu, ShuXia; Du, YuYue

2015-01-01

Logic Petri nets (LPNs) can describe and analyze batch processing functions and passing value indeterminacy in cooperative systems. Logic Petri workflow nets (LPWNs) are proposed based on LPNs in this paper. Process mining is regarded as an important bridge between modeling and analysis of data mining and business process. Workflow nets (WF-nets) are the extension to Petri nets (PNs), and have successfully been used to process mining. Some shortcomings cannot be avoided in process mining, such as duplicate tasks, invisible tasks, and the noise of logs. The online shop in electronic commerce in this paper is modeled to prove the equivalence between LPWNs and WF-nets, and advantages of LPWNs are presented.

The Equivalency between Logic Petri Workflow Nets and Workflow Nets

Science.gov (United States)

Wang, Jing; Yu, ShuXia; Du, YuYue

2015-01-01

Logic Petri nets (LPNs) can describe and analyze batch processing functions and passing value indeterminacy in cooperative systems. Logic Petri workflow nets (LPWNs) are proposed based on LPNs in this paper. Process mining is regarded as an important bridge between modeling and analysis of data mining and business process. Workflow nets (WF-nets) are the extension to Petri nets (PNs), and have successfully been used to process mining. Some shortcomings cannot be avoided in process mining, such as duplicate tasks, invisible tasks, and the noise of logs. The online shop in electronic commerce in this paper is modeled to prove the equivalence between LPWNs and WF-nets, and advantages of LPWNs are presented. PMID:25821845

Examining daily activity routines of older adults using workflow.

Science.gov (United States)

Chung, Jane; Ozkaynak, Mustafa; Demiris, George

2017-07-01

We evaluated the value of workflow analysis supported by a novel visualization technique to better understand the daily routines of older adults and highlight their patterns of daily activities and normal variability in physical functions. We used a self-reported activity diary to obtain data from six community-dwelling older adults for 14 consecutive days. Workflow for daily routine was analyzed using the EventFlow tool, which aggregates workflow information to highlight patterns and variabilities. A total of 1453 events were included in the data analysis. To demonstrate the patterns and variability of each individual's daily activities, participant activity workflows were visualized and compared. The workflow analysis revealed great variability in activity types, regularity, frequency, duration, and timing of performing certain activities across individuals. Also, when workflow approach was applied to spatial information of activities, the analysis revealed the ability to provide meaningful data on individuals' mobility in different levels of life spaces from home to community. Results suggest that using workflows to characterize the daily activities of older adults will be helpful for clinicians and researchers in understanding their daily routines and preparing education and prevention strategies tailored to each individual's activity level. This tool also has the potential to be integrated into consumer informatics technologies, such as patient portals or personal health records, so that consumers may be encouraged to become actively involved in monitoring and managing their health. Copyright © 2017 Elsevier Inc. All rights reserved.

Multilevel Workflow System in the ATLAS Experiment

CERN Document Server

Borodin, M; The ATLAS collaboration; Golubkov, D; Klimentov, A; Maeno, T; Vaniachine, A

2015-01-01

The ATLAS experiment is scaling up Big Data processing for the next LHC run using a multilevel workflow system comprised of many layers. In Big Data processing ATLAS deals with datasets, not individual files. Similarly a task (comprised of many jobs) has become a unit of the ATLAS workflow in distributed computing, with about 0.8M tasks processed per year. In order to manage the diversity of LHC physics (exceeding 35K physics samples per year), the individual data processing tasks are organized into workflows. For example, the Monte Carlo workflow is composed of many steps: generate or configure hard-processes, hadronize signal and minimum-bias (pileup) events, simulate energy deposition in the ATLAS detector, digitize electronics response, simulate triggers, reconstruct data, convert the reconstructed data into ROOT ntuples for physics analysis, etc. Outputs are merged and/or filtered as necessary to optimize the chain. The bi-level workflow manager - ProdSys2 - generates actual workflow tasks and their jobs...

Dynamic reusable workflows for ocean science

Science.gov (United States)

Signell, Richard; Fernandez, Filipe; Wilcox, Kyle

2016-01-01

Digital catalogs of ocean data have been available for decades, but advances in standardized services and software for catalog search and data access make it now possible to create catalog-driven workflows that automate — end-to-end — data search, analysis and visualization of data from multiple distributed sources. Further, these workflows may be shared, reused and adapted with ease. Here we describe a workflow developed within the US Integrated Ocean Observing System (IOOS) which automates the skill-assessment of water temperature forecasts from multiple ocean forecast models, allowing improved forecast products to be delivered for an open water swim event. A series of Jupyter Notebooks are used to capture and document the end-to-end workflow using a collection of Python tools that facilitate working with standardized catalog and data services. The workflow first searches a catalog of metadata using the Open Geospatial Consortium (OGC) Catalog Service for the Web (CSW), then accesses data service endpoints found in the metadata records using the OGC Sensor Observation Service (SOS) for in situ sensor data and OPeNDAP services for remotely-sensed and model data. Skill metrics are computed and time series comparisons of forecast model and observed data are displayed interactively, leveraging the capabilities of modern web browsers. The resulting workflow not only solves a challenging specific problem, but highlights the benefits of dynamic, reusable workflows in general. These workflows adapt as new data enters the data system, facilitate reproducible science, provide templates from which new scientific workflows can be developed, and encourage data providers to use standardized services. As applied to the ocean swim event, the workflow exposed problems with two of the ocean forecast products which led to improved regional forecasts once errors were corrected. While the example is specific, the approach is general, and we hope to see increased use of dynamic

Dynamic Reusable Workflows for Ocean Science

Directory of Open Access Journals (Sweden)

Richard P. Signell

2016-10-01

Full Text Available Digital catalogs of ocean data have been available for decades, but advances in standardized services and software for catalog searches and data access now make it possible to create catalog-driven workflows that automate—end-to-end—data search, analysis, and visualization of data from multiple distributed sources. Further, these workflows may be shared, reused, and adapted with ease. Here we describe a workflow developed within the US Integrated Ocean Observing System (IOOS which automates the skill assessment of water temperature forecasts from multiple ocean forecast models, allowing improved forecast products to be delivered for an open water swim event. A series of Jupyter Notebooks are used to capture and document the end-to-end workflow using a collection of Python tools that facilitate working with standardized catalog and data services. The workflow first searches a catalog of metadata using the Open Geospatial Consortium (OGC Catalog Service for the Web (CSW, then accesses data service endpoints found in the metadata records using the OGC Sensor Observation Service (SOS for in situ sensor data and OPeNDAP services for remotely-sensed and model data. Skill metrics are computed and time series comparisons of forecast model and observed data are displayed interactively, leveraging the capabilities of modern web browsers. The resulting workflow not only solves a challenging specific problem, but highlights the benefits of dynamic, reusable workflows in general. These workflows adapt as new data enter the data system, facilitate reproducible science, provide templates from which new scientific workflows can be developed, and encourage data providers to use standardized services. As applied to the ocean swim event, the workflow exposed problems with two of the ocean forecast products which led to improved regional forecasts once errors were corrected. While the example is specific, the approach is general, and we hope to see increased

Workflows for microarray data processing in the Kepler environment

Science.gov (United States)

2012-01-01

Background Microarray data analysis has been the subject of extensive and ongoing pipeline development due to its complexity, the availability of several options at each analysis step, and the development of new analysis demands, including integration with new data sources. Bioinformatics pipelines are usually custom built for different applications, making them typically difficult to modify, extend and repurpose. Scientific workflow systems are intended to address these issues by providing general-purpose frameworks in which to develop and execute such pipelines. The Kepler workflow environment is a well-established system under continual development that is employed in several areas of scientific research. Kepler provides a flexible graphical interface, featuring clear display of parameter values, for design and modification of workflows. It has capabilities for developing novel computational components in the R, Python, and Java programming languages, all of which are widely used for bioinformatics algorithm development, along with capabilities for invoking external applications and using web services. Results We developed a series of fully functional bioinformatics pipelines addressing common tasks in microarray processing in the Kepler workflow environment. These pipelines consist of a set of tools for GFF file processing of NimbleGen chromatin immunoprecipitation on microarray (ChIP-chip) datasets and more comprehensive workflows for Affymetrix gene expression microarray bioinformatics and basic primer design for PCR experiments, which are often used to validate microarray results. Although functional in themselves, these workflows can be easily customized, extended, or repurposed to match the needs of specific projects and are designed to be a toolkit and starting point for specific applications. These workflows illustrate a workflow programming paradigm focusing on local resources (programs and data) and therefore are close to traditional shell scripting or

Workflows for microarray data processing in the Kepler environment

Directory of Open Access Journals (Sweden)

Stropp Thomas

2012-05-01

Full Text Available Abstract Background Microarray data analysis has been the subject of extensive and ongoing pipeline development due to its complexity, the availability of several options at each analysis step, and the development of new analysis demands, including integration with new data sources. Bioinformatics pipelines are usually custom built for different applications, making them typically difficult to modify, extend and repurpose. Scientific workflow systems are intended to address these issues by providing general-purpose frameworks in which to develop and execute such pipelines. The Kepler workflow environment is a well-established system under continual development that is employed in several areas of scientific research. Kepler provides a flexible graphical interface, featuring clear display of parameter values, for design and modification of workflows. It has capabilities for developing novel computational components in the R, Python, and Java programming languages, all of which are widely used for bioinformatics algorithm development, along with capabilities for invoking external applications and using web services. Results We developed a series of fully functional bioinformatics pipelines addressing common tasks in microarray processing in the Kepler workflow environment. These pipelines consist of a set of tools for GFF file processing of NimbleGen chromatin immunoprecipitation on microarray (ChIP-chip datasets and more comprehensive workflows for Affymetrix gene expression microarray bioinformatics and basic primer design for PCR experiments, which are often used to validate microarray results. Although functional in themselves, these workflows can be easily customized, extended, or repurposed to match the needs of specific projects and are designed to be a toolkit and starting point for specific applications. These workflows illustrate a workflow programming paradigm focusing on local resources (programs and data and therefore are close to

Workflows for microarray data processing in the Kepler environment.

Science.gov (United States)

Stropp, Thomas; McPhillips, Timothy; Ludäscher, Bertram; Bieda, Mark

2012-05-17

Microarray data analysis has been the subject of extensive and ongoing pipeline development due to its complexity, the availability of several options at each analysis step, and the development of new analysis demands, including integration with new data sources. Bioinformatics pipelines are usually custom built for different applications, making them typically difficult to modify, extend and repurpose. Scientific workflow systems are intended to address these issues by providing general-purpose frameworks in which to develop and execute such pipelines. The Kepler workflow environment is a well-established system under continual development that is employed in several areas of scientific research. Kepler provides a flexible graphical interface, featuring clear display of parameter values, for design and modification of workflows. It has capabilities for developing novel computational components in the R, Python, and Java programming languages, all of which are widely used for bioinformatics algorithm development, along with capabilities for invoking external applications and using web services. We developed a series of fully functional bioinformatics pipelines addressing common tasks in microarray processing in the Kepler workflow environment. These pipelines consist of a set of tools for GFF file processing of NimbleGen chromatin immunoprecipitation on microarray (ChIP-chip) datasets and more comprehensive workflows for Affymetrix gene expression microarray bioinformatics and basic primer design for PCR experiments, which are often used to validate microarray results. Although functional in themselves, these workflows can be easily customized, extended, or repurposed to match the needs of specific projects and are designed to be a toolkit and starting point for specific applications. These workflows illustrate a workflow programming paradigm focusing on local resources (programs and data) and therefore are close to traditional shell scripting or R

Improving adherence to the Epic Beacon ambulatory workflow.

Science.gov (United States)

Chackunkal, Ellen; Dhanapal Vogel, Vishnuprabha; Grycki, Meredith; Kostoff, Diana

2017-06-01

Computerized physician order entry has been shown to significantly improve chemotherapy safety by reducing the number of prescribing errors. Epic's Beacon Oncology Information System of computerized physician order entry and electronic medication administration was implemented in Henry Ford Health System's ambulatory oncology infusion centers on 9 November 2013. Since that time, compliance to the infusion workflow had not been assessed. The objective of this study was to optimize the current workflow and improve the compliance to this workflow in the ambulatory oncology setting. This study was a retrospective, quasi-experimental study which analyzed the composite workflow compliance rate of patient encounters from 9 to 23 November 2014. Based on this analysis, an intervention was identified and implemented in February 2015 to improve workflow compliance. The primary endpoint was to compare the composite compliance rate to the Beacon workflow before and after a pharmacy-initiated intervention. The intervention, which was education of infusion center staff, was initiated by ambulatory-based, oncology pharmacists and implemented by a multi-disciplinary team of pharmacists and nurses. The composite compliance rate was then reassessed for patient encounters from 2 to 13 March 2015 in order to analyze the effects of the determined intervention on compliance. The initial analysis in November 2014 revealed a composite compliance rate of 38%, and data analysis after the intervention revealed a statistically significant increase in the composite compliance rate to 83% ( p < 0.001). This study supports a pharmacist-initiated educational intervention can improve compliance to an ambulatory, oncology infusion workflow.

Verification of Timed Healthcare Workflows Using Component Timed-Arc Petri Nets

DEFF Research Database (Denmark)

Bertolini, Cristiano; Liu, Zhiming; Srba, Jiri

2013-01-01

Workflows in modern healthcare systems are becoming increasingly complex and their execution involves concurrency and sharing of resources. The definition, analysis and management of collaborative healthcare workflows requires abstract model notations with a precisely defined semantics and a supp......Workflows in modern healthcare systems are becoming increasingly complex and their execution involves concurrency and sharing of resources. The definition, analysis and management of collaborative healthcare workflows requires abstract model notations with a precisely defined semantics...

Tavaxy: integrating Taverna and Galaxy workflows with cloud computing support.

Science.gov (United States)

Abouelhoda, Mohamed; Issa, Shadi Alaa; Ghanem, Moustafa

2012-05-04

Over the past decade the workflow system paradigm has evolved as an efficient and user-friendly approach for developing complex bioinformatics applications. Two popular workflow systems that have gained acceptance by the bioinformatics community are Taverna and Galaxy. Each system has a large user-base and supports an ever-growing repository of application workflows. However, workflows developed for one system cannot be imported and executed easily on the other. The lack of interoperability is due to differences in the models of computation, workflow languages, and architectures of both systems. This lack of interoperability limits sharing of workflows between the user communities and leads to duplication of development efforts. In this paper, we present Tavaxy, a stand-alone system for creating and executing workflows based on using an extensible set of re-usable workflow patterns. Tavaxy offers a set of new features that simplify and enhance the development of sequence analysis applications: It allows the integration of existing Taverna and Galaxy workflows in a single environment, and supports the use of cloud computing capabilities. The integration of existing Taverna and Galaxy workflows is supported seamlessly at both run-time and design-time levels, based on the concepts of hierarchical workflows and workflow patterns. The use of cloud computing in Tavaxy is flexible, where the users can either instantiate the whole system on the cloud, or delegate the execution of certain sub-workflows to the cloud infrastructure. Tavaxy reduces the workflow development cycle by introducing the use of workflow patterns to simplify workflow creation. It enables the re-use and integration of existing (sub-) workflows from Taverna and Galaxy, and allows the creation of hybrid workflows. Its additional features exploit recent advances in high performance cloud computing to cope with the increasing data size and complexity of analysis.The system can be accessed either through a

Tavaxy: Integrating Taverna and Galaxy workflows with cloud computing support

Directory of Open Access Journals (Sweden)

Abouelhoda Mohamed

2012-05-01

Full Text Available Abstract Background Over the past decade the workflow system paradigm has evolved as an efficient and user-friendly approach for developing complex bioinformatics applications. Two popular workflow systems that have gained acceptance by the bioinformatics community are Taverna and Galaxy. Each system has a large user-base and supports an ever-growing repository of application workflows. However, workflows developed for one system cannot be imported and executed easily on the other. The lack of interoperability is due to differences in the models of computation, workflow languages, and architectures of both systems. This lack of interoperability limits sharing of workflows between the user communities and leads to duplication of development efforts. Results In this paper, we present Tavaxy, a stand-alone system for creating and executing workflows based on using an extensible set of re-usable workflow patterns. Tavaxy offers a set of new features that simplify and enhance the development of sequence analysis applications: It allows the integration of existing Taverna and Galaxy workflows in a single environment, and supports the use of cloud computing capabilities. The integration of existing Taverna and Galaxy workflows is supported seamlessly at both run-time and design-time levels, based on the concepts of hierarchical workflows and workflow patterns. The use of cloud computing in Tavaxy is flexible, where the users can either instantiate the whole system on the cloud, or delegate the execution of certain sub-workflows to the cloud infrastructure. Conclusions Tavaxy reduces the workflow development cycle by introducing the use of workflow patterns to simplify workflow creation. It enables the re-use and integration of existing (sub- workflows from Taverna and Galaxy, and allows the creation of hybrid workflows. Its additional features exploit recent advances in high performance cloud computing to cope with the increasing data size and

Tavaxy: Integrating Taverna and Galaxy workflows with cloud computing support

Science.gov (United States)

2012-01-01

Background Over the past decade the workflow system paradigm has evolved as an efficient and user-friendly approach for developing complex bioinformatics applications. Two popular workflow systems that have gained acceptance by the bioinformatics community are Taverna and Galaxy. Each system has a large user-base and supports an ever-growing repository of application workflows. However, workflows developed for one system cannot be imported and executed easily on the other. The lack of interoperability is due to differences in the models of computation, workflow languages, and architectures of both systems. This lack of interoperability limits sharing of workflows between the user communities and leads to duplication of development efforts. Results In this paper, we present Tavaxy, a stand-alone system for creating and executing workflows based on using an extensible set of re-usable workflow patterns. Tavaxy offers a set of new features that simplify and enhance the development of sequence analysis applications: It allows the integration of existing Taverna and Galaxy workflows in a single environment, and supports the use of cloud computing capabilities. The integration of existing Taverna and Galaxy workflows is supported seamlessly at both run-time and design-time levels, based on the concepts of hierarchical workflows and workflow patterns. The use of cloud computing in Tavaxy is flexible, where the users can either instantiate the whole system on the cloud, or delegate the execution of certain sub-workflows to the cloud infrastructure. Conclusions Tavaxy reduces the workflow development cycle by introducing the use of workflow patterns to simplify workflow creation. It enables the re-use and integration of existing (sub-) workflows from Taverna and Galaxy, and allows the creation of hybrid workflows. Its additional features exploit recent advances in high performance cloud computing to cope with the increasing data size and complexity of analysis. The system

Integrated workflows for spiking neuronal network simulations

Directory of Open Access Journals (Sweden)

Ján eAntolík

2013-12-01

Full Text Available The increasing availability of computational resources is enabling more detailed, realistic modelling in computational neuroscience, resulting in a shift towards more heterogeneous models of neuronal circuits, and employment of complex experimental protocols. This poses a challenge for existing tool chains, as the set of tools involved in a typical modeller's workflow is expanding concomitantly, with growing complexity in the metadata flowing between them. For many parts of the workflow, a range of tools is available; however, numerous areas lack dedicated tools, while integration of existing tools is limited. This forces modellers to either handle the workflow manually, leading to errors, or to write substantial amounts of code to automate parts of the workflow, in both cases reducing their productivity.To address these issues, we have developed Mozaik: a workflow system for spiking neuronal network simulations written in Python. Mozaik integrates model, experiment and stimulation specification, simulation execution, data storage, data analysis and visualisation into a single automated workflow, ensuring that all relevant metadata are available to all workflow components. It is based on several existing tools, including PyNN, Neo and Matplotlib. It offers a declarative way to specify models and recording configurations using hierarchically organised configuration files. Mozaik automatically records all data together with all relevant metadata about the experimental context, allowing automation of the analysis and visualisation stages. Mozaik has a modular architecture, and the existing modules are designed to be extensible with minimal programming effort. Mozaik increases the productivity of running virtual experiments on highly structured neuronal networks by automating the entire experimental cycle, while increasing the reliability of modelling studies by relieving the user from manual handling of the flow of metadata between the individual

Activation of Students with Various Teaching Methods

DEFF Research Database (Denmark)

Andersen, Shuang Ma

2011-01-01

A group of teaching methodes to active engineer students have been tried out. The methodes are developed based on the Pedagogical Cyclic Workflow (PCW). Comparing with earlier evaluation, positive feedback is achieved among the students.......A group of teaching methodes to active engineer students have been tried out. The methodes are developed based on the Pedagogical Cyclic Workflow (PCW). Comparing with earlier evaluation, positive feedback is achieved among the students....

Galaxy tools and workflows for sequence analysis with applications in molecular plant pathology.

Science.gov (United States)

Cock, Peter J A; Grüning, Björn A; Paszkiewicz, Konrad; Pritchard, Leighton

2013-01-01

The Galaxy Project offers the popular web browser-based platform Galaxy for running bioinformatics tools and constructing simple workflows. Here, we present a broad collection of additional Galaxy tools for large scale analysis of gene and protein sequences. The motivating research theme is the identification of specific genes of interest in a range of non-model organisms, and our central example is the identification and prediction of "effector" proteins produced by plant pathogens in order to manipulate their host plant. This functional annotation of a pathogen's predicted capacity for virulence is a key step in translating sequence data into potential applications in plant pathology. This collection includes novel tools, and widely-used third-party tools such as NCBI BLAST+ wrapped for use within Galaxy. Individual bioinformatics software tools are typically available separately as standalone packages, or in online browser-based form. The Galaxy framework enables the user to combine these and other tools to automate organism scale analyses as workflows, without demanding familiarity with command line tools and scripting. Workflows created using Galaxy can be saved and are reusable, so may be distributed within and between research groups, facilitating the construction of a set of standardised, reusable bioinformatic protocols. The Galaxy tools and workflows described in this manuscript are open source and freely available from the Galaxy Tool Shed (http://usegalaxy.org/toolshed or http://toolshed.g2.bx.psu.edu).

Building and documenting workflows with python-based snakemake

OpenAIRE

Köster, Johannes; Rahmann, Sven

2012-01-01

textabstractSnakemake is a novel workflow engine with a simple Python-derived workflow definition language and an optimizing execution environment. It is the first system that supports multiple named wildcards (or variables) in input and output filenames of each rule definition. It also allows to write human-readable workflows that document themselves. We have found Snakemake especially useful for building high-throughput sequencing data analysis pipelines and present examples from this area....

wft4galaxy: a workflow testing tool for galaxy.

Science.gov (United States)

Piras, Marco Enrico; Pireddu, Luca; Zanetti, Gianluigi

2017-12-01

Workflow managers for scientific analysis provide a high-level programming platform facilitating standardization, automation, collaboration and access to sophisticated computing resources. The Galaxy workflow manager provides a prime example of this type of platform. As compositions of simpler tools, workflows effectively comprise specialized computer programs implementing often very complex analysis procedures. To date, no simple way to automatically test Galaxy workflows and ensure their correctness has appeared in the literature. With wft4galaxy we offer a tool to bring automated testing to Galaxy workflows, making it feasible to bring continuous integration to their development and ensuring that defects are detected promptly. wft4galaxy can be easily installed as a regular Python program or launched directly as a Docker container-the latter reducing installation effort to a minimum. Available at https://github.com/phnmnl/wft4galaxy under the Academic Free License v3.0. marcoenrico.piras@crs4.it. © The Author 2017. Published by Oxford University Press.

Reasoning about repairability of workflows at design time

NARCIS (Netherlands)

Tagni, Gaston; Ten Teije, Annette; Van Harmelen, Frank

2009-01-01

This paper describes an approach for reasoning about the repairability of workflows at design time. We propose a heuristic-based analysis of a workflow that aims at evaluating its definition, considering different design aspects and characteristics that affect its repairability (called repairability

Scientific Workflow Management in Proteomics

Science.gov (United States)

de Bruin, Jeroen S.; Deelder, André M.; Palmblad, Magnus

2012-01-01

Data processing in proteomics can be a challenging endeavor, requiring extensive knowledge of many different software packages, all with different algorithms, data format requirements, and user interfaces. In this article we describe the integration of a number of existing programs and tools in Taverna Workbench, a scientific workflow manager currently being developed in the bioinformatics community. We demonstrate how a workflow manager provides a single, visually clear and intuitive interface to complex data analysis tasks in proteomics, from raw mass spectrometry data to protein identifications and beyond. PMID:22411703

Towards an Intelligent Workflow Designer based on the Reuse of Workflow Patterns

NARCIS (Netherlands)

Iochpe, Cirano; Chiao, Carolina; Hess, Guillermo; Nascimento, Gleison; Thom, Lucinéia; Reichert, Manfred

2007-01-01

In order to perform process-aware information systems we need sophisticated methods and concepts for designing and modeling processes. Recently, research on workflow patterns has emerged in order to increase the reuse of recurring workflow structures. However, current workflow modeling tools do not

Bidirectional Retroviral Integration Site PCR Methodology and Quantitative Data Analysis Workflow.

Science.gov (United States)

Suryawanshi, Gajendra W; Xu, Song; Xie, Yiming; Chou, Tom; Kim, Namshin; Chen, Irvin S Y; Kim, Sanggu

2017-06-14

Integration Site (IS) assays are a critical component of the study of retroviral integration sites and their biological significance. In recent retroviral gene therapy studies, IS assays, in combination with next-generation sequencing, have been used as a cell-tracking tool to characterize clonal stem cell populations sharing the same IS. For the accurate comparison of repopulating stem cell clones within and across different samples, the detection sensitivity, data reproducibility, and high-throughput capacity of the assay are among the most important assay qualities. This work provides a detailed protocol and data analysis workflow for bidirectional IS analysis. The bidirectional assay can simultaneously sequence both upstream and downstream vector-host junctions. Compared to conventional unidirectional IS sequencing approaches, the bidirectional approach significantly improves IS detection rates and the characterization of integration events at both ends of the target DNA. The data analysis pipeline described here accurately identifies and enumerates identical IS sequences through multiple steps of comparison that map IS sequences onto the reference genome and determine sequencing errors. Using an optimized assay procedure, we have recently published the detailed repopulation patterns of thousands of Hematopoietic Stem Cell (HSC) clones following transplant in rhesus macaques, demonstrating for the first time the precise time point of HSC repopulation and the functional heterogeneity of HSCs in the primate system. The following protocol describes the step-by-step experimental procedure and data analysis workflow that accurately identifies and quantifies identical IS sequences.

Kronos: a workflow assembler for genome analytics and informatics

Science.gov (United States)

Taghiyar, M. Jafar; Rosner, Jamie; Grewal, Diljot; Grande, Bruno M.; Aniba, Radhouane; Grewal, Jasleen; Boutros, Paul C.; Morin, Ryan D.

2017-01-01

Abstract Background: The field of next-generation sequencing informatics has matured to a point where algorithmic advances in sequence alignment and individual feature detection methods have stabilized. Practical and robust implementation of complex analytical workflows (where such tools are structured into “best practices” for automated analysis of next-generation sequencing datasets) still requires significant programming investment and expertise. Results: We present Kronos, a software platform for facilitating the development and execution of modular, auditable, and distributable bioinformatics workflows. Kronos obviates the need for explicit coding of workflows by compiling a text configuration file into executable Python applications. Making analysis modules would still require programming. The framework of each workflow includes a run manager to execute the encoded workflows locally (or on a cluster or cloud), parallelize tasks, and log all runtime events. The resulting workflows are highly modular and configurable by construction, facilitating flexible and extensible meta-applications that can be modified easily through configuration file editing. The workflows are fully encoded for ease of distribution and can be instantiated on external systems, a step toward reproducible research and comparative analyses. We introduce a framework for building Kronos components that function as shareable, modular nodes in Kronos workflows. Conclusions: The Kronos platform provides a standard framework for developers to implement custom tools, reuse existing tools, and contribute to the community at large. Kronos is shipped with both Docker and Amazon Web Services Machine Images. It is free, open source, and available through the Python Package Index and at https://github.com/jtaghiyar/kronos. PMID:28655203

Integrative Workflows for Metagenomic Analysis

Directory of Open Access Journals (Sweden)

Efthymios eLadoukakis

2014-11-01

Full Text Available The rapid evolution of all sequencing technologies, described by the term Next Generation Sequencing (NGS, have revolutionized metagenomic analysis. They constitute a combination of high-throughput analytical protocols, coupled to delicate measuring techniques, in order to potentially discover, properly assemble and map allelic sequences to the correct genomes, achieving particularly high yields for only a fraction of the cost of traditional processes (i.e. Sanger. From a bioinformatic perspective, this boils down to many gigabytes of data being generated from each single sequencing experiment, rendering the management or even the storage, critical bottlenecks with respect to the overall analytical endeavor. The enormous complexity is even more aggravated by the versatility of the processing steps available, represented by the numerous bioinformatic tools that are essential, for each analytical task, in order to fully unveil the genetic content of a metagenomic dataset. These disparate tasks range from simple, nonetheless non-trivial, quality control of raw data to exceptionally complex protein annotation procedures, requesting a high level of expertise for their proper application or the neat implementation of the whole workflow. Furthermore, a bioinformatic analysis of such scale, requires grand computational resources, imposing as the sole realistic solution, the utilization of cloud computing infrastructures. In this review article we discuss different, integrative, bioinformatic solutions available, which address the aforementioned issues, by performing a critical assessment of the available automated pipelines for data management, quality control and annotation of metagenomic data, embracing various, major sequencing technologies and applications.

Data Workflow - A Workflow Model for Continuous Data Processing

NARCIS (Netherlands)

Wombacher, Andreas

2010-01-01

Online data or streaming data are getting more and more important for enterprise information systems, e.g. by integrating sensor data and workflows. The continuous flow of data provided e.g. by sensors requires new workflow models addressing the data perspective of these applications, since

Workflow in Almaraz NPP

International Nuclear Information System (INIS)

Gonzalez Crego, E.; Martin Lopez-Suevos, C.

2000-01-01

Almaraz NPP decided to incorporate Workflow into its information system in response to the need to provide exhaustive follow-up and monitoring of each phase of the different procedures it manages. Oracle's Workflow was chosen for this purpose and it was integrated with previously developed applications. The objectives to be met in the incorporation of Workflow were as follows: Strict monitoring of procedures and processes. Detection of bottlenecks in the flow of information. Notification of those affected by pending tasks. Flexible allocation of tasks to user groups. Improved monitoring of management procedures. Improved communication. Similarly, special care was taken to: Integrate workflow processes with existing control panels. Synchronize workflow with installation procedures. Ensure that the system reflects use of paper forms. At present the Corrective Maintenance Request module is being operated using Workflow and the Work Orders and Notice of Order modules are about to follow suit. (Author)

Web-video-mining-supported workflow modeling for laparoscopic surgeries.

Science.gov (United States)

Liu, Rui; Zhang, Xiaoli; Zhang, Hao

2016-11-01

As quality assurance is of strong concern in advanced surgeries, intelligent surgical systems are expected to have knowledge such as the knowledge of the surgical workflow model (SWM) to support their intuitive cooperation with surgeons. For generating a robust and reliable SWM, a large amount of training data is required. However, training data collected by physically recording surgery operations is often limited and data collection is time-consuming and labor-intensive, severely influencing knowledge scalability of the surgical systems. The objective of this research is to solve the knowledge scalability problem in surgical workflow modeling with a low cost and labor efficient way. A novel web-video-mining-supported surgical workflow modeling (webSWM) method is developed. A novel video quality analysis method based on topic analysis and sentiment analysis techniques is developed to select high-quality videos from abundant and noisy web videos. A statistical learning method is then used to build the workflow model based on the selected videos. To test the effectiveness of the webSWM method, 250 web videos were mined to generate a surgical workflow for the robotic cholecystectomy surgery. The generated workflow was evaluated by 4 web-retrieved videos and 4 operation-room-recorded videos, respectively. The evaluation results (video selection consistency n-index ≥0.60; surgical workflow matching degree ≥0.84) proved the effectiveness of the webSWM method in generating robust and reliable SWM knowledge by mining web videos. With the webSWM method, abundant web videos were selected and a reliable SWM was modeled in a short time with low labor cost. Satisfied performances in mining web videos and learning surgery-related knowledge show that the webSWM method is promising in scaling knowledge for intelligent surgical systems. Copyright © 2016 Elsevier B.V. All rights reserved.

Job life cycle management libraries for CMS workflow management projects

International Nuclear Information System (INIS)

Lingen, Frank van; Wilkinson, Rick; Evans, Dave; Foulkes, Stephen; Afaq, Anzar; Vaandering, Eric; Ryu, Seangchan

2010-01-01

Scientific analysis and simulation requires the processing and generation of millions of data samples. These tasks are often comprised of multiple smaller tasks divided over multiple (computing) sites. This paper discusses the Compact Muon Solenoid (CMS) workflow infrastructure, and specifically the Python based workflow library which is used for so called task lifecycle management. The CMS workflow infrastructure consists of three layers: high level specification of the various tasks based on input/output data sets, life cycle management of task instances derived from the high level specification and execution management. The workflow library is the result of a convergence of three CMS sub projects that respectively deal with scientific analysis, simulation and real time data aggregation from the experiment. This will reduce duplication and hence development and maintenance costs.

Multilevel Workflow System in the ATLAS Experiment

International Nuclear Information System (INIS)

Borodin, M; De, K; Navarro, J Garcia; Golubkov, D; Klimentov, A; Maeno, T; Vaniachine, A

2015-01-01

The ATLAS experiment is scaling up Big Data processing for the next LHC run using a multilevel workflow system comprised of many layers. In Big Data processing ATLAS deals with datasets, not individual files. Similarly a task (comprised of many jobs) has become a unit of the ATLAS workflow in distributed computing, with about 0.8M tasks processed per year. In order to manage the diversity of LHC physics (exceeding 35K physics samples per year), the individual data processing tasks are organized into workflows. For example, the Monte Carlo workflow is composed of many steps: generate or configure hard-processes, hadronize signal and minimum-bias (pileup) events, simulate energy deposition in the ATLAS detector, digitize electronics response, simulate triggers, reconstruct data, convert the reconstructed data into ROOT ntuples for physics analysis, etc. Outputs are merged and/or filtered as necessary to optimize the chain. The bi-level workflow manager - ProdSys2 - generates actual workflow tasks and their jobs are executed across more than a hundred distributed computing sites by PanDA - the ATLAS job-level workload management system. On the outer level, the Database Engine for Tasks (DEfT) empowers production managers with templated workflow definitions. On the next level, the Job Execution and Definition Interface (JEDI) is integrated with PanDA to provide dynamic job definition tailored to the sites capabilities. We report on scaling up the production system to accommodate a growing number of requirements from main ATLAS areas: Trigger, Physics and Data Preparation. (paper)

Modeling, Design, and Implementation of a Cloud Workflow Engine Based on Aneka

OpenAIRE

Zhou, Jiantao; Sun, Chaoxin; Fu, Weina; Liu, Jing; Jia, Lei; Tan, Hongyan

2014-01-01

This paper presents a Petri net-based model for cloud workflow which plays a key role in industry. Three kinds of parallelisms in cloud workflow are characterized and modeled. Based on the analysis of the modeling, a cloud workflow engine is designed and implemented in Aneka cloud environment. The experimental results validate the effectiveness of our approach of modeling, design, and implementation of cloud workflow.

Laboratory Workflow Analysis of Culture of Periprosthetic Tissues in Blood Culture Bottles.

Science.gov (United States)

Peel, Trisha N; Sedarski, John A; Dylla, Brenda L; Shannon, Samantha K; Amirahmadi, Fazlollaah; Hughes, John G; Cheng, Allen C; Patel, Robin

2017-09-01

Culture of periprosthetic tissue specimens in blood culture bottles is more sensitive than conventional techniques, but the impact on laboratory workflow has yet to be addressed. Herein, we examined the impact of culture of periprosthetic tissues in blood culture bottles on laboratory workflow and cost. The workflow was process mapped, decision tree models were constructed using probabilities of positive and negative cultures drawn from our published study (T. N. Peel, B. L. Dylla, J. G. Hughes, D. T. Lynch, K. E. Greenwood-Quaintance, A. C. Cheng, J. N. Mandrekar, and R. Patel, mBio 7:e01776-15, 2016, https://doi.org/10.1128/mBio.01776-15), and the processing times and resource costs from the laboratory staff time viewpoint were used to compare periprosthetic tissues culture processes using conventional techniques with culture in blood culture bottles. Sensitivity analysis was performed using various rates of positive cultures. Annualized labor savings were estimated based on salary costs from the U.S. Labor Bureau for Laboratory staff. The model demonstrated a 60.1% reduction in mean total staff time with the adoption of tissue inoculation into blood culture bottles compared to conventional techniques (mean ± standard deviation, 30.7 ± 27.6 versus 77.0 ± 35.3 h per month, respectively; P < 0.001). The estimated annualized labor cost savings of culture using blood culture bottles was $10,876.83 (±$337.16). Sensitivity analysis was performed using various rates of culture positivity (5 to 50%). Culture in blood culture bottles was cost-effective, based on the estimated labor cost savings of $2,132.71 for each percent increase in test accuracy. In conclusion, culture of periprosthetic tissue in blood culture bottles is not only more accurate than but is also cost-saving compared to conventional culture methods. Copyright © 2017 American Society for Microbiology.

Comparison of Resource Platform Selection Approaches for Scientific Workflows

Energy Technology Data Exchange (ETDEWEB)

Simmhan, Yogesh; Ramakrishnan, Lavanya

2010-03-05

Cloud computing is increasingly considered as an additional computational resource platform for scientific workflows. The cloud offers opportunity to scale-out applications from desktops and local cluster resources. At the same time, it can eliminate the challenges of restricted software environments and queue delays in shared high performance computing environments. Choosing from these diverse resource platforms for a workflow execution poses a challenge for many scientists. Scientists are often faced with deciding resource platform selection trade-offs with limited information on the actual workflows. While many workflow planning methods have explored task scheduling onto different resources, these methods often require fine-scale characterization of the workflow that is onerous for a scientist. In this position paper, we describe our early exploratory work into using blackbox characteristics to do a cost-benefit analysis across of using cloud platforms. We use only very limited high-level information on the workflow length, width, and data sizes. The length and width are indicative of the workflow duration and parallelism. The data size characterizes the IO requirements. We compare the effectiveness of this approach to other resource selection models using two exemplar scientific workflows scheduled on desktops, local clusters, HPC centers, and clouds. Early results suggest that the blackbox model often makes the same resource selections as a more fine-grained whitebox model. We believe the simplicity of the blackbox model can help inform a scientist on the applicability of cloud computing resources even before porting an existing workflow.

Progress in digital color workflow understanding in the International Color Consortium (ICC) Workflow WG

Science.gov (United States)

McCarthy, Ann

2006-01-01

The ICC Workflow WG serves as the bridge between ICC color management technologies and use of those technologies in real world color production applications. ICC color management is applicable to and is used in a wide range of color systems, from highly specialized digital cinema color special effects to high volume publications printing to home photography. The ICC Workflow WG works to align ICC technologies so that the color management needs of these diverse use case systems are addressed in an open, platform independent manner. This report provides a high level summary of the ICC Workflow WG objectives and work to date, focusing on the ways in which workflow can impact image quality and color systems performance. The 'ICC Workflow Primitives' and 'ICC Workflow Patterns and Dimensions' workflow models are covered in some detail. Consider the questions, "How much of dissatisfaction with color management today is the result of 'the wrong color transformation at the wrong time' and 'I can't get to the right conversion at the right point in my work process'?" Put another way, consider how image quality through a workflow can be negatively affected when the coordination and control level of the color management system is not sufficient.

Time-Efficiency Analysis Comparing Digital and Conventional Workflows for Implant Crowns: A Prospective Clinical Crossover Trial.

Science.gov (United States)

Joda, Tim; Brägger, Urs

2015-01-01

To compare time-efficiency in the production of implant crowns using a digital workflow versus the conventional pathway. This prospective clinical study used a crossover design that included 20 study participants receiving single-tooth replacements in posterior sites. Each patient received a customized titanium abutment plus a computer-aided design/computer-assisted manufacture (CAD/CAM) zirconia suprastructure (for those in the test group, using digital workflow) and a standardized titanium abutment plus a porcelain-fused-to-metal crown (for those in the control group, using a conventional pathway). The start of the implant prosthetic treatment was established as the baseline. Time-efficiency analysis was defined as the primary outcome, and was measured for every single clinical and laboratory work step in minutes. Statistical analysis was calculated with the Wilcoxon rank sum test. All crowns could be provided within two clinical appointments, independent of the manufacturing process. The mean total production time, as the sum of clinical plus laboratory work steps, was significantly different. The mean ± standard deviation (SD) time was 185.4 ± 17.9 minutes for the digital workflow process and 223.0 ± 26.2 minutes for the conventional pathway (P = .0001). Therefore, digital processing for overall treatment was 16% faster. Detailed analysis for the clinical treatment revealed a significantly reduced mean ± SD chair time of 27.3 ± 3.4 minutes for the test group compared with 33.2 ± 4.9 minutes for the control group (P = .0001). Similar results were found for the mean laboratory work time, with a significant decrease of 158.1 ± 17.2 minutes for the test group vs 189.8 ± 25.3 minutes for the control group (P = .0001). Only a few studies have investigated efficiency parameters of digital workflows compared with conventional pathways in implant dental medicine. This investigation shows that the digital workflow seems to be more time-efficient than the

CMS distributed computing workflow experience

Science.gov (United States)

Adelman-McCarthy, Jennifer; Gutsche, Oliver; Haas, Jeffrey D.; Prosper, Harrison B.; Dutta, Valentina; Gomez-Ceballos, Guillelmo; Hahn, Kristian; Klute, Markus; Mohapatra, Ajit; Spinoso, Vincenzo; Kcira, Dorian; Caudron, Julien; Liao, Junhui; Pin, Arnaud; Schul, Nicolas; De Lentdecker, Gilles; McCartin, Joseph; Vanelderen, Lukas; Janssen, Xavier; Tsyganov, Andrey; Barge, Derek; Lahiff, Andrew

2011-12-01

The vast majority of the CMS Computing capacity, which is organized in a tiered hierarchy, is located away from CERN. The 7 Tier-1 sites archive the LHC proton-proton collision data that is initially processed at CERN. These sites provide access to all recorded and simulated data for the Tier-2 sites, via wide-area network (WAN) transfers. All central data processing workflows are executed at the Tier-1 level, which contain re-reconstruction and skimming workflows of collision data as well as reprocessing of simulated data to adapt to changing detector conditions. This paper describes the operation of the CMS processing infrastructure at the Tier-1 level. The Tier-1 workflows are described in detail. The operational optimization of resource usage is described. In particular, the variation of different workflows during the data taking period of 2010, their efficiencies and latencies as well as their impact on the delivery of physics results is discussed and lessons are drawn from this experience. The simulation of proton-proton collisions for the CMS experiment is primarily carried out at the second tier of the CMS computing infrastructure. Half of the Tier-2 sites of CMS are reserved for central Monte Carlo (MC) production while the other half is available for user analysis. This paper summarizes the large throughput of the MC production operation during the data taking period of 2010 and discusses the latencies and efficiencies of the various types of MC production workflows. We present the operational procedures to optimize the usage of available resources and we the operational model of CMS for including opportunistic resources, such as the larger Tier-3 sites, into the central production operation.

CMS distributed computing workflow experience

International Nuclear Information System (INIS)

Adelman-McCarthy, Jennifer; Gutsche, Oliver; Haas, Jeffrey D; Prosper, Harrison B; Dutta, Valentina; Gomez-Ceballos, Guillelmo; Hahn, Kristian; Klute, Markus; Mohapatra, Ajit; Spinoso, Vincenzo; Kcira, Dorian; Caudron, Julien; Liao Junhui; Pin, Arnaud; Schul, Nicolas; Lentdecker, Gilles De; McCartin, Joseph; Vanelderen, Lukas; Janssen, Xavier; Tsyganov, Andrey

2011-01-01

The vast majority of the CMS Computing capacity, which is organized in a tiered hierarchy, is located away from CERN. The 7 Tier-1 sites archive the LHC proton-proton collision data that is initially processed at CERN. These sites provide access to all recorded and simulated data for the Tier-2 sites, via wide-area network (WAN) transfers. All central data processing workflows are executed at the Tier-1 level, which contain re-reconstruction and skimming workflows of collision data as well as reprocessing of simulated data to adapt to changing detector conditions. This paper describes the operation of the CMS processing infrastructure at the Tier-1 level. The Tier-1 workflows are described in detail. The operational optimization of resource usage is described. In particular, the variation of different workflows during the data taking period of 2010, their efficiencies and latencies as well as their impact on the delivery of physics results is discussed and lessons are drawn from this experience. The simulation of proton-proton collisions for the CMS experiment is primarily carried out at the second tier of the CMS computing infrastructure. Half of the Tier-2 sites of CMS are reserved for central Monte Carlo (MC) production while the other half is available for user analysis. This paper summarizes the large throughput of the MC production operation during the data taking period of 2010 and discusses the latencies and efficiencies of the various types of MC production workflows. We present the operational procedures to optimize the usage of available resources and we the operational model of CMS for including opportunistic resources, such as the larger Tier-3 sites, into the central production operation.

A Generalized Email Classification System for Workflow Analysis

NARCIS (Netherlands)

P. Chaipornkaew (Piyanuch); T. Prexawanprasut (Takorn); C-L. Chang (Chia-Lin); M.J. McAleer (Michael)

2017-01-01

textabstractOne of the most powerful internet communication channels is email. As employees and their clients communicate primarily via email, much crucial business data is conveyed via email content. Where businesses are understandably concerned, they need a sophisticated workflow management

LabelFlow Framework for Annotating Workflow Provenance

Directory of Open Access Journals (Sweden)

Pinar Alper

2018-02-01

Full Text Available Scientists routinely analyse and share data for others to use. Successful data (reuse relies on having metadata describing the context of analysis of data. In many disciplines the creation of contextual metadata is referred to as reporting. One method of implementing analyses is with workflows. A stand-out feature of workflows is their ability to record provenance from executions. Provenance is useful when analyses are executed with changing parameters (changing contexts and results need to be traced to respective parameters. In this paper we investigate whether provenance can be exploited to support reporting. Specifically; we outline a case-study based on a real-world workflow and set of reporting queries. We observe that provenance, as collected from workflow executions, is of limited use for reporting, as it supports queries partially. We identify that this is due to the generic nature of provenance, its lack of domain-specific contextual metadata. We observe that the required information is available in implicit form, embedded in data. We describe LabelFlow, a framework comprised of four Labelling Operators for decorating provenance with domain-specific Labels. LabelFlow can be instantiated for a domain by plugging it with domain-specific metadata extractors. We provide a tool that takes as input a workflow, and produces as output a Labelling Pipeline for that workflow, comprised of Labelling Operators. We revisit the case-study and show how Labels provide a more complete implementation of reporting queries.

Distributing Workflows over a Ubiquitous P2P Network

Directory of Open Access Journals (Sweden)

Eddie Al-Shakarchi

2007-01-01

Full Text Available This paper discusses issues in the distribution of bundled workflows across ubiquitous peer-to-peer networks for the application of music information retrieval. The underlying motivation for this work is provided by the DART project, which aims to develop a novel music recommendation system by gathering statistical data using collaborative filtering techniques and the analysis of the audio itsel, in order to create a reliable and comprehensive database of the music that people own and which they listen to. To achieve this, the DART scientists creating the algorithms need the ability to distribute the Triana workflows they create, representing the analysis to be performed, across the network on a regular basis (perhaps even daily in order to update the network as a whole with new workflows to be executed for the analysis. DART uses a similar approach to BOINC but differs in that the workers receive input data in the form of a bundled Triana workflow, which is executed in order to process any MP3 files that they own on their machine. Once analysed, the results are returned to DART's distributed database that collects and aggregates the resulting information. DART employs the use of package repositories to decentralise the distribution of such workflow bundles and this approach is validated in this paper through simulations that show that suitable scalability is maintained through the system as the number of participants increases. The results clearly illustrate the effectiveness of the approach.

Insightful Workflow For Grid Computing

Energy Technology Data Exchange (ETDEWEB)

Dr. Charles Earl

2008-10-09

We developed a workflow adaptation and scheduling system for Grid workflow. The system currently interfaces with and uses the Karajan workflow system. We developed machine learning agents that provide the planner/scheduler with information needed to make decisions about when and how to replan. The Kubrick restructures workflow at runtime, making it unique among workflow scheduling systems. The existing Kubrick system provides a platform on which to integrate additional quality of service constraints and in which to explore the use of an ensemble of scheduling and planning algorithms. This will be the principle thrust of our Phase II work.

Pathology economic model tool: a novel approach to workflow and budget cost analysis in an anatomic pathology laboratory.

Science.gov (United States)

Muirhead, David; Aoun, Patricia; Powell, Michael; Juncker, Flemming; Mollerup, Jens

2010-08-01

The need for higher efficiency, maximum quality, and faster turnaround time is a continuous focus for anatomic pathology laboratories and drives changes in work scheduling, instrumentation, and management control systems. To determine the costs of generating routine, special, and immunohistochemical microscopic slides in a large, academic anatomic pathology laboratory using a top-down approach. The Pathology Economic Model Tool was used to analyze workflow processes at The Nebraska Medical Center's anatomic pathology laboratory. Data from the analysis were used to generate complete cost estimates, which included not only materials, consumables, and instrumentation but also specific labor and overhead components for each of the laboratory's subareas. The cost data generated by the Pathology Economic Model Tool were compared with the cost estimates generated using relative value units. Despite the use of automated systems for different processes, the workflow in the laboratory was found to be relatively labor intensive. The effect of labor and overhead on per-slide costs was significantly underestimated by traditional relative-value unit calculations when compared with the Pathology Economic Model Tool. Specific workflow defects with significant contributions to the cost per slide were identified. The cost of providing routine, special, and immunohistochemical slides may be significantly underestimated by traditional methods that rely on relative value units. Furthermore, a comprehensive analysis may identify specific workflow processes requiring improvement.

Office 2010 Workflow Developing Collaborative Solutions

CERN Document Server

Mann, David; Enterprises, Creative

2010-01-01

Workflow is the glue that binds information worker processes, users, and artifacts. Without workflow, information workers are just islands of data and potential. Office 2010 Workflow details how to implement workflow in SharePoint 2010 and the client Microsoft Office 2010 suite to help information workers share data, enforce processes and business rules, and work more efficiently together or solo. This book covers everything you need to know-from what workflow is all about to creating new activities; from the SharePoint Designer to Visual Studio 2010; from out-of-the-box workflows to state mac

End-to-end workflow for finite element analysis of tumor treating fields in glioblastomas

Science.gov (United States)

Timmons, Joshua J.; Lok, Edwin; San, Pyay; Bui, Kevin; Wong, Eric T.

2017-11-01

Tumor Treating Fields (TTFields) therapy is an approved modality of treatment for glioblastoma. Patient anatomy-based finite element analysis (FEA) has the potential to reveal not only how these fields affect tumor control but also how to improve efficacy. While the automated tools for segmentation speed up the generation of FEA models, multi-step manual corrections are required, including removal of disconnected voxels, incorporation of unsegmented structures and the addition of 36 electrodes plus gel layers matching the TTFields transducers. Existing approaches are also not scalable for the high throughput analysis of large patient volumes. A semi-automated workflow was developed to prepare FEA models for TTFields mapping in the human brain. Magnetic resonance imaging (MRI) pre-processing, segmentation, electrode and gel placement, and post-processing were all automated. The material properties of each tissue were applied to their corresponding mask in silico using COMSOL Multiphysics (COMSOL, Burlington, MA, USA). The fidelity of the segmentations with and without post-processing was compared against the full semi-automated segmentation workflow approach using Dice coefficient analysis. The average relative differences for the electric fields generated by COMSOL were calculated in addition to observed differences in electric field-volume histograms. Furthermore, the mesh file formats in MPHTXT and NASTRAN were also compared using the differences in the electric field-volume histogram. The Dice coefficient was less for auto-segmentation without versus auto-segmentation with post-processing, indicating convergence on a manually corrected model. An existent but marginal relative difference of electric field maps from models with manual correction versus those without was identified, and a clear advantage of using the NASTRAN mesh file format was found. The software and workflow outlined in this article may be used to accelerate the investigation of TTFields in

End-to-end workflow for finite element analysis of tumor treating fields in glioblastomas.

Science.gov (United States)

Timmons, Joshua J; Lok, Edwin; San, Pyay; Bui, Kevin; Wong, Eric T

2017-10-12

Tumor Treating Fields (TTFields) therapy is an approved modality of treatment for glioblastoma. Patient anatomy-based finite element analysis (FEA) has the potential to reveal not only how these fields affect tumor control but also how to improve efficacy. While the automated tools for segmentation speed up the generation of FEA models, multi-step manual corrections are required, including removal of disconnected voxels, incorporation of unsegmented structures and the addition of 36 electrodes plus gel layers matching the TTFields transducers. Existing approaches are also not scalable for the high throughput analysis of large patient volumes. A semi-automated workflow was developed to prepare FEA models for TTFields mapping in the human brain. Magnetic resonance imaging (MRI) pre-processing, segmentation, electrode and gel placement, and post-processing were all automated. The material properties of each tissue were applied to their corresponding mask in silico using COMSOL Multiphysics (COMSOL, Burlington, MA, USA). The fidelity of the segmentations with and without post-processing was compared against the full semi-automated segmentation workflow approach using Dice coefficient analysis. The average relative differences for the electric fields generated by COMSOL were calculated in addition to observed differences in electric field-volume histograms. Furthermore, the mesh file formats in MPHTXT and NASTRAN were also compared using the differences in the electric field-volume histogram. The Dice coefficient was less for auto-segmentation without versus auto-segmentation with post-processing, indicating convergence on a manually corrected model. An existent but marginal relative difference of electric field maps from models with manual correction versus those without was identified, and a clear advantage of using the NASTRAN mesh file format was found. The software and workflow outlined in this article may be used to accelerate the investigation of TTFields in

Physicians' and Nurses' Opinions about the Impact of a Computerized Provider Order Entry System on Their Workflow.

Science.gov (United States)

Ayatollahi, Haleh; Roozbehi, Masoud; Haghani, Hamid

2015-01-01

In clinical practices, the use of information technology, especially computerized provider order entry (CPOE) systems, has been found to be an effective strategy to improve patient care. This study aimed to compare physicians' and nurses' views about the impact of CPOE on their workflow. This case study was conducted in 2012. The potential participants included all physicians (n = 28) and nurses (n = 145) who worked in a teaching hospital. Data were collected using a five-point Likert-scale questionnaire and were analyzed using SPSS version 18.0. The results showed a significant difference between physicians' and nurses' views about the impact of the system on interorganizational workflow (p = .001) and working relationships between physicians and nurses (p = .017). Interorganizational workflow and working relationships between care providers are important issues that require more attention. Before a CPOE system is designed, it is necessary to identify workflow patterns and hidden structures to avoid compromising quality of care and patient safety.

Inter-observer reliability assessments in time motion studies: the foundation for meaningful clinical workflow analysis.

Science.gov (United States)

Lopetegui, Marcelo A; Bai, Shasha; Yen, Po-Yin; Lai, Albert; Embi, Peter; Payne, Philip R O

2013-01-01

Understanding clinical workflow is critical for researchers and healthcare decision makers. Current workflow studies tend to oversimplify and underrepresent the complexity of clinical workflow. Continuous observation time motion studies (TMS) could enhance clinical workflow studies by providing rich quantitative data required for in-depth workflow analyses. However, methodological inconsistencies have been reported in continuous observation TMS, potentially reducing the validity of TMS' data and limiting their contribution to the general state of knowledge. We believe that a cornerstone in standardizing TMS is to ensure the reliability of the human observers. In this manuscript we review the approaches for inter-observer reliability assessment (IORA) in a representative sample of TMS focusing on clinical workflow. We found that IORA is an uncommon practice, inconsistently reported, and often uses methods that provide partial and overestimated measures of agreement. Since a comprehensive approach to IORA is yet to be proposed and validated, we provide initial recommendations for IORA reporting in continuous observation TMS.

Workflow efficiency for the treatment planning process in CT-guided high-dose-rate brachytherapy for cervical cancer.

Science.gov (United States)

Michaud, Anthony L; Benedict, Stanley; Montemayor, Eliseo; Hunt, Jon Paul; Wright, Cari; Mathai, Mathew; Mayadev, Jyoti S

2016-01-01

To investigate process efficiency, we present a prospective investigation of the treatment planning phase of image-guided brachytherapy (BT) for cervical cancer using a specific checklist. From October 2012 to January 2014, 76 BT procedures were consecutively performed. Prospective data on the CT-based treatment planning process was collected using a specific checklist which details the following steps: (1) dosimetry planning, (2) physician review start, (3) physician review time, (4) dosimetry processing, (5) physics review start, (6) physics review, and (7) procedural pause. Variables examined included the use of a pre-BT MRI, clinic duty conflicts, resident teaching, and the use of specific BT planners. Analysis was performed using descriptive statistics, t-test, and analysis of variance. Seventy-five prospectively gathered checklists comprised this analysis. The mean time for treatment planning was 95 minutes (med 94, std 18). The mean intervals in the above steps were (1) = 42, (2) = 5, (3) = 19, (4) = 10, (5) = 6, (6) = 13, and (7) = 26 minutes. There was no statistical difference in patients who had a pre-BT MRI. Resident teaching did not influence time, p = 0.17. Treatment planning time was decreased with a specific planner, p = 0.0015. A skillful team approach is required for treatment planning efficiency in image-guided BT. We have found that the specific BT planners can have a significant effect on the overall planning efficiency. We continue to examine clinical and workflow-related factors that will enhance our safety and workflow process with BT. Published by Elsevier Inc.

DEWEY: the DICOM-enabled workflow engine system.

Science.gov (United States)

Erickson, Bradley J; Langer, Steve G; Blezek, Daniel J; Ryan, William J; French, Todd L

2014-06-01

Workflow is a widely used term to describe the sequence of steps to accomplish a task. The use of workflow technology in medicine and medical imaging in particular is limited. In this article, we describe the application of a workflow engine to improve workflow in a radiology department. We implemented a DICOM-enabled workflow engine system in our department. We designed it in a way to allow for scalability, reliability, and flexibility. We implemented several workflows, including one that replaced an existing manual workflow and measured the number of examinations prepared in time without and with the workflow system. The system significantly increased the number of examinations prepared in time for clinical review compared to human effort. It also met the design goals defined at its outset. Workflow engines appear to have value as ways to efficiently assure that complex workflows are completed in a timely fashion.

A Kepler Workflow Tool for Reproducible AMBER GPU Molecular Dynamics.

Science.gov (United States)

Purawat, Shweta; Ieong, Pek U; Malmstrom, Robert D; Chan, Garrett J; Yeung, Alan K; Walker, Ross C; Altintas, Ilkay; Amaro, Rommie E

2017-06-20

With the drive toward high throughput molecular dynamics (MD) simulations involving ever-greater numbers of simulation replicates run for longer, biologically relevant timescales (microseconds), the need for improved computational methods that facilitate fully automated MD workflows gains more importance. Here we report the development of an automated workflow tool to perform AMBER GPU MD simulations. Our workflow tool capitalizes on the capabilities of the Kepler platform to deliver a flexible, intuitive, and user-friendly environment and the AMBER GPU code for a robust and high-performance simulation engine. Additionally, the workflow tool reduces user input time by automating repetitive processes and facilitates access to GPU clusters, whose high-performance processing power makes simulations of large numerical scale possible. The presented workflow tool facilitates the management and deployment of large sets of MD simulations on heterogeneous computing resources. The workflow tool also performs systematic analysis on the simulation outputs and enhances simulation reproducibility, execution scalability, and MD method development including benchmarking and validation. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Quantitative workflow based on NN for weighting criteria in landfill suitability mapping

Science.gov (United States)

Abujayyab, Sohaib K. M.; Ahamad, Mohd Sanusi S.; Yahya, Ahmad Shukri; Ahmad, Siti Zubaidah; Alkhasawneh, Mutasem Sh.; Aziz, Hamidi Abdul

2017-10-01

Our study aims to introduce a new quantitative workflow that integrates neural networks (NNs) and multi criteria decision analysis (MCDA). Existing MCDA workflows reveal a number of drawbacks, because of the reliance on human knowledge in the weighting stage. Thus, new workflow presented to form suitability maps at the regional scale for solid waste planning based on NNs. A feed-forward neural network employed in the workflow. A total of 34 criteria were pre-processed to establish the input dataset for NN modelling. The final learned network used to acquire the weights of the criteria. Accuracies of 95.2% and 93.2% achieved for the training dataset and testing dataset, respectively. The workflow was found to be capable of reducing human interference to generate highly reliable maps. The proposed workflow reveals the applicability of NN in generating landfill suitability maps and the feasibility of integrating them with existing MCDA workflows.

Safety and feasibility of STAT RAD: Improvement of a novel rapid tomotherapy-based radiation therapy workflow by failure mode and effects analysis.

Science.gov (United States)

Jones, Ryan T; Handsfield, Lydia; Read, Paul W; Wilson, David D; Van Ausdal, Ray; Schlesinger, David J; Siebers, Jeffrey V; Chen, Quan

2015-01-01

The clinical challenge of radiation therapy (RT) for painful bone metastases requires clinicians to consider both treatment efficacy and patient prognosis when selecting a radiation therapy regimen. The traditional RT workflow requires several weeks for common palliative RT schedules of 30 Gy in 10 fractions or 20 Gy in 5 fractions. At our institution, we have created a new RT workflow termed "STAT RAD" that allows clinicians to perform computed tomographic (CT) simulation, planning, and highly conformal single fraction treatment delivery within 2 hours. In this study, we evaluate the safety and feasibility of the STAT RAD workflow. A failure mode and effects analysis (FMEA) was performed on the STAT RAD workflow, including development of a process map, identification of potential failure modes, description of the cause and effect, temporal occurrence, and team member involvement in each failure mode, and examination of existing safety controls. A risk probability number (RPN) was calculated for each failure mode. As necessary, workflow adjustments were then made to safeguard failure modes of significant RPN values. After workflow alterations, RPN numbers were again recomputed. A total of 72 potential failure modes were identified in the pre-FMEA STAT RAD workflow, of which 22 met the RPN threshold for clinical significance. Workflow adjustments included the addition of a team member checklist, changing simulation from megavoltage CT to kilovoltage CT, alteration of patient-specific quality assurance testing, and allocating increased time for critical workflow steps. After these modifications, only 1 failure mode maintained RPN significance; patient motion after alignment or during treatment. Performing the FMEA for the STAT RAD workflow before clinical implementation has significantly strengthened the safety and feasibility of STAT RAD. The FMEA proved a valuable evaluation tool, identifying potential problem areas so that we could create a safer workflow

Dual-use tools and systematics-aware analysis workflows in the ATLAS Run-II analysis model

CERN Document Server

FARRELL, Steven; The ATLAS collaboration

2015-01-01

The ATLAS analysis model has been overhauled for the upcoming run of data collection in 2015 at 13 TeV. One key component of this upgrade was the Event Data Model (EDM), which now allows for greater flexibility in the choice of analysis software framework and provides powerful new features that can be exploited by analysis software tools. A second key component of the upgrade is the introduction of a dual-use tool technology, which provides abstract interfaces for analysis software tools to run in either the Athena framework or a ROOT-based framework. The tool interfaces, including a new interface for handling systematic uncertainties, have been standardized for the development of improved analysis workflows and consolidation of high-level analysis tools. This presentation will cover the details of the dual-use tool functionality, the systematics interface, and how these features fit into a centrally supported analysis environment.

Dual-use tools and systematics-aware analysis workflows in the ATLAS Run-2 analysis model

CERN Document Server

FARRELL, Steven; The ATLAS collaboration; Calafiura, Paolo; Delsart, Pierre-Antoine; Elsing, Markus; Koeneke, Karsten; Krasznahorkay, Attila; Krumnack, Nils; Lancon, Eric; Lavrijsen, Wim; Laycock, Paul; Lei, Xiaowen; Strandberg, Sara Kristina; Verkerke, Wouter; Vivarelli, Iacopo; Woudstra, Martin

2015-01-01

The ATLAS analysis model has been overhauled for the upcoming run of data collection in 2015 at 13 TeV. One key component of this upgrade was the Event Data Model (EDM), which now allows for greater flexibility in the choice of analysis software framework and provides powerful new features that can be exploited by analysis software tools. A second key component of the upgrade is the introduction of a dual-use tool technology, which provides abstract interfaces for analysis software tools to run in either the Athena framework or a ROOT-based framework. The tool interfaces, including a new interface for handling systematic uncertainties, have been standardized for the development of improved analysis workflows and consolidation of high-level analysis tools. This paper will cover the details of the dual-use tool functionality, the systematics interface, and how these features fit into a centrally supported analysis environment.

Adaptation of a Bioinformatics Microarray Analysis Workflow for a Toxicogenomic Study in Rainbow Trout.

Directory of Open Access Journals (Sweden)

Sophie Depiereux

Full Text Available Sex steroids play a key role in triggering sex differentiation in fish, the use of exogenous hormone treatment leading to partial or complete sex reversal. This phenomenon has attracted attention since the discovery that even low environmental doses of exogenous steroids can adversely affect gonad morphology (ovotestis development and induce reproductive failure. Modern genomic-based technologies have enhanced opportunities to find out mechanisms of actions (MOA and identify biomarkers related to the toxic action of a compound. However, high throughput data interpretation relies on statistical analysis, species genomic resources, and bioinformatics tools. The goals of this study are to improve the knowledge of feminisation in fish, by the analysis of molecular responses in the gonads of rainbow trout fry after chronic exposure to several doses (0.01, 0.1, 1 and 10 μg/L of ethynylestradiol (EE2 and to offer target genes as potential biomarkers of ovotestis development. We successfully adapted a bioinformatics microarray analysis workflow elaborated on human data to a toxicogenomic study using rainbow trout, a fish species lacking accurate functional annotation and genomic resources. The workflow allowed to obtain lists of genes supposed to be enriched in true positive differentially expressed genes (DEGs, which were subjected to over-representation analysis methods (ORA. Several pathways and ontologies, mostly related to cell division and metabolism, sexual reproduction and steroid production, were found significantly enriched in our analyses. Moreover, two sets of potential ovotestis biomarkers were selected using several criteria. The first group displayed specific potential biomarkers belonging to pathways/ontologies highlighted in the experiment. Among them, the early ovarian differentiation gene foxl2a was overexpressed. The second group, which was highly sensitive but not specific, included the DEGs presenting the highest fold change and

A method to mine workflows from provenance for assisting scientific workflow composition

NARCIS (Netherlands)

Zeng, R.; He, X.; Aalst, van der W.M.P.

2011-01-01

Scientific workflows have recently emerged as a new paradigm for representing and managing complex distributed scientific computations and are used to accelerate the pace of scientific discovery. In many disciplines, individual workflows are large and complicated due to the large quantities of data

Dynamic Service Selection in Workflows Using Performance Data

Directory of Open Access Journals (Sweden)

David W. Walker

2007-01-01

Full Text Available An approach to dynamic workflow management and optimisation using near-realtime performance data is presented. Strategies are discussed for choosing an optimal service (based on user-specified criteria from several semantically equivalent Web services. Such an approach may involve finding "similar" services, by first pruning the set of discovered services based on service metadata, and subsequently selecting an optimal service based on performance data. The current implementation of the prototype workflow framework is described, and demonstrated with a simple workflow. Performance results are presented that show the performance benefits of dynamic service selection. A statistical analysis based on the first order statistic is used to investigate the likely improvement in service response time arising from dynamic service selection.

A Web-Hosted R Workflow to Simplify and Automate the Analysis of 16S NGS Data

Science.gov (United States)

Next-Generation Sequencing (NGS) produces large data sets that include tens-of-thousands of sequence reads per sample. For analysis of bacterial diversity, 16S NGS sequences are typically analyzed in a workflow that containing best-of-breed bioinformatics packages that may levera...

Next-generation sequencing meets genetic diagnostics: development of a comprehensive workflow for the analysis of BRCA1 and BRCA2 genes

Science.gov (United States)

Feliubadaló, Lídia; Lopez-Doriga, Adriana; Castellsagué, Ester; del Valle, Jesús; Menéndez, Mireia; Tornero, Eva; Montes, Eva; Cuesta, Raquel; Gómez, Carolina; Campos, Olga; Pineda, Marta; González, Sara; Moreno, Victor; Brunet, Joan; Blanco, Ignacio; Serra, Eduard; Capellá, Gabriel; Lázaro, Conxi

2013-01-01

Next-generation sequencing (NGS) is changing genetic diagnosis due to its huge sequencing capacity and cost-effectiveness. The aim of this study was to develop an NGS-based workflow for routine diagnostics for hereditary breast and ovarian cancer syndrome (HBOCS), to improve genetic testing for BRCA1 and BRCA2. A NGS-based workflow was designed using BRCA MASTR kit amplicon libraries followed by GS Junior pyrosequencing. Data analysis combined Variant Identification Pipeline freely available software and ad hoc R scripts, including a cascade of filters to generate coverage and variant calling reports. A BRCA homopolymer assay was performed in parallel. A research scheme was designed in two parts. A Training Set of 28 DNA samples containing 23 unique pathogenic mutations and 213 other variants (33 unique) was used. The workflow was validated in a set of 14 samples from HBOCS families in parallel with the current diagnostic workflow (Validation Set). The NGS-based workflow developed permitted the identification of all pathogenic mutations and genetic variants, including those located in or close to homopolymers. The use of NGS for detecting copy-number alterations was also investigated. The workflow meets the sensitivity and specificity requirements for the genetic diagnosis of HBOCS and improves on the cost-effectiveness of current approaches. PMID:23249957

Conceptual-level workflow modeling of scientific experiments using NMR as a case study

Directory of Open Access Journals (Sweden)

Gryk Michael R

2007-01-01

Full Text Available Abstract Background Scientific workflows improve the process of scientific experiments by making computations explicit, underscoring data flow, and emphasizing the participation of humans in the process when intuition and human reasoning are required. Workflows for experiments also highlight transitions among experimental phases, allowing intermediate results to be verified and supporting the proper handling of semantic mismatches and different file formats among the various tools used in the scientific process. Thus, scientific workflows are important for the modeling and subsequent capture of bioinformatics-related data. While much research has been conducted on the implementation of scientific workflows, the initial process of actually designing and generating the workflow at the conceptual level has received little consideration. Results We propose a structured process to capture scientific workflows at the conceptual level that allows workflows to be documented efficiently, results in concise models of the workflow and more-correct workflow implementations, and provides insight into the scientific process itself. The approach uses three modeling techniques to model the structural, data flow, and control flow aspects of the workflow. The domain of biomolecular structure determination using Nuclear Magnetic Resonance spectroscopy is used to demonstrate the process. Specifically, we show the application of the approach to capture the workflow for the process of conducting biomolecular analysis using Nuclear Magnetic Resonance (NMR spectroscopy. Conclusion Using the approach, we were able to accurately document, in a short amount of time, numerous steps in the process of conducting an experiment using NMR spectroscopy. The resulting models are correct and precise, as outside validation of the models identified only minor omissions in the models. In addition, the models provide an accurate visual description of the control flow for conducting

On Lifecycle Constraints of Artifact-Centric Workflows

Science.gov (United States)

Kucukoguz, Esra; Su, Jianwen

Data plays a fundamental role in modeling and management of business processes and workflows. Among the recent "data-aware" workflow models, artifact-centric models are particularly interesting. (Business) artifacts are the key data entities that are used in workflows and can reflect both the business logic and the execution states of a running workflow. The notion of artifacts succinctly captures the fluidity aspect of data during workflow executions. However, much of the technical dimension concerning artifacts in workflows is not well understood. In this paper, we study a key concept of an artifact "lifecycle". In particular, we allow declarative specifications/constraints of artifact lifecycle in the spirit of DecSerFlow, and formulate the notion of lifecycle as the set of all possible paths an artifact can navigate through. We investigate two technical problems: (Compliance) does a given workflow (schema) contain only lifecycle allowed by a constraint? And (automated construction) from a given lifecycle specification (constraint), is it possible to construct a "compliant" workflow? The study is based on a new formal variant of artifact-centric workflow model called "ArtiNets" and two classes of lifecycle constraints named "regular" and "counting" constraints. We present a range of technical results concerning compliance and automated construction, including: (1) compliance is decidable when workflow is atomic or constraints are regular, (2) for each constraint, we can always construct a workflow that satisfies the constraint, and (3) sufficient conditions where atomic workflows can be constructed.

Perti Net-Based Workflow Access Control Model

Institute of Scientific and Technical Information of China (English)

陈卓; 骆婷; 石磊; 洪帆

2004-01-01

Access control is an important protection mechanism for information systems. This paper shows how to make access control in workflow system. We give a workflow access control model (WACM) based on several current access control models. The model supports roles assignment and dynamic authorization. The paper defines the workflow using Petri net. It firstly gives the definition and description of the workflow, and then analyzes the architecture of the workflow access control model (WACM). Finally, an example of an e-commerce workflow access control model is discussed in detail.

From Requirements via Colored Workflow Nets to an Implementation in Several Workflow Systems

DEFF Research Database (Denmark)

Mans, Ronnie S:; van der Aalst, Wil M.P.; Bakker, Piet J.M.

2007-01-01

care process of the Academic Medical Center (AMC) hospital is used as reference process. The process consists of hundreds of activities. These have been modeled and analyzed using an EUC and a CWN. Moreover, based on the CWN, the process has been implemented using four different workflow systems......Care organizations, such as hospitals, need to support complex and dynamic workflows. More- over, many disciplines are involved. This makes it important to avoid the typical disconnect between requirements and the actual implementation of the system. This paper proposes an approach where...... an Executable Use Case (EUC) and Colored Workflow Net (CWN) are used to close the gap between the given requirements specification and the realization of these requirements with the help of a workflow system. This paper describes a large case study where the diagnostic tra jectory of the gynaecological oncology...

Planning bioinformatics workflows using an expert system

Science.gov (United States)

Chen, Xiaoling; Chang, Jeffrey T.

2017-01-01

Abstract Motivation: Bioinformatic analyses are becoming formidably more complex due to the increasing number of steps required to process the data, as well as the proliferation of methods that can be used in each step. To alleviate this difficulty, pipelines are commonly employed. However, pipelines are typically implemented to automate a specific analysis, and thus are difficult to use for exploratory analyses requiring systematic changes to the software or parameters used. Results: To automate the development of pipelines, we have investigated expert systems. We created the Bioinformatics ExperT SYstem (BETSY) that includes a knowledge base where the capabilities of bioinformatics software is explicitly and formally encoded. BETSY is a backwards-chaining rule-based expert system comprised of a data model that can capture the richness of biological data, and an inference engine that reasons on the knowledge base to produce workflows. Currently, the knowledge base is populated with rules to analyze microarray and next generation sequencing data. We evaluated BETSY and found that it could generate workflows that reproduce and go beyond previously published bioinformatics results. Finally, a meta-investigation of the workflows generated from the knowledge base produced a quantitative measure of the technical burden imposed by each step of bioinformatics analyses, revealing the large number of steps devoted to the pre-processing of data. In sum, an expert system approach can facilitate exploratory bioinformatic analysis by automating the development of workflows, a task that requires significant domain expertise. Availability and Implementation: https://github.com/jefftc/changlab Contact: jeffrey.t.chang@uth.tmc.edu PMID:28052928

The myth of standardized workflow in primary care.

Science.gov (United States)

Holman, G Talley; Beasley, John W; Karsh, Ben-Tzion; Stone, Jamie A; Smith, Paul D; Wetterneck, Tosha B

2016-01-01

Primary care efficiency and quality are essential for the nation's health. The demands on primary care physicians (PCPs) are increasing as healthcare becomes more complex. A more complete understanding of PCP workflow variation is needed to guide future healthcare redesigns. This analysis evaluates workflow variation in terms of the sequence of tasks performed during patient visits. Two patient visits from 10 PCPs from 10 different United States Midwestern primary care clinics were analyzed to determine physician workflow. Tasks and the progressive sequence of those tasks were observed, documented, and coded by task category using a PCP task list. Variations in the sequence and prevalence of tasks at each stage of the primary care visit were assessed considering the physician, the patient, the visit's progression, and the presence of an electronic health record (EHR) at the clinic. PCP workflow during patient visits varies significantly, even for an individual physician, with no single or even common workflow pattern being present. The prevalence of specific tasks shifts significantly as primary care visits progress to their conclusion but, notably, PCPs collect patient information throughout the visit. PCP workflows were unpredictable during face-to-face patient visits. Workflow emerges as the result of a "dance" between physician and patient as their separate agendas are addressed, a side effect of patient-centered practice. Future healthcare redesigns should support a wide variety of task sequences to deliver high-quality primary care. The development of tools such as electronic health records must be based on the realities of primary care visits if they are to successfully support a PCP's mental and physical work, resulting in effective, safe, and efficient primary care. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Use of a Hands Free, Instantaneous, Closed-Loop Communication Device Improves Perception of Communication and Workflow Integration in an Academic Teaching Hospital: A Pilot Study.

Science.gov (United States)

Fang, Daniel Z; Patil, Teja; Belitskaya-Levy, Ilana; Yeung, Marianne; Posley, Keith; Allaudeen, Nazima

2017-11-17

Efficient and effective communication between providers is critical to quality patient care within a hospital system. Hands free communication devices (HFCD) allow instantaneous, closed-loop communication between physicians and other members of a multidisciplinary team, providing a communication advantage over traditional pager systems. HFCD have been shown to decrease emergency room interruptions, improve nursing communication, improve speed of information flow, and eliminate health care waste. We evaluated the integration of an HFCD with an existing alphanumeric paging system on an acute inpatient medicine service. We conducted a prospective, observational, survey-based study over twenty-four weeks in an academic tertiary care center with attending physicians and residents. Our intervention involved the implementation of an HFCD alongside the existing paging system. Fifty-six pre and post surveys evaluated the perception of improvement in communication and the integration of the HFCD into existing workflow. We saw significant improvements in the ability of an HFCD to help physicians communicate thoughts clearly, communicate thoughts effectively, reach team members, reach ancillary staff, and stay informed about patients. Physicians also reported better workflow integration during admissions, rounds, discharge, and teaching sessions. Qualitative data from post surveys demonstrated that the greatest strengths of the HFCD included the ability to reach colleagues and staff quickly, provide instant access to individuals of the care team, and improve overall communication. Integration of an instantaneous, hands free, closed loop communication system alongside the existing pager system can provide improvements in the perceptions of communication and workflow integration in an academic medicine service. Future studies are needed to correlate these subjective findings with objective measures of quality and safety.

Decaf: Decoupled Dataflows for In Situ High-Performance Workflows

Energy Technology Data Exchange (ETDEWEB)

Dreher, M.; Peterka, T.

2017-07-31

Decaf is a dataflow system for the parallel communication of coupled tasks in an HPC workflow. The dataflow can perform arbitrary data transformations ranging from simply forwarding data to complex data redistribution. Decaf does this by allowing the user to allocate resources and execute custom code in the dataflow. All communication through the dataflow is efficient parallel message passing over MPI. The runtime for calling tasks is entirely message-driven; Decaf executes a task when all messages for the task have been received. Such a messagedriven runtime allows cyclic task dependencies in the workflow graph, for example, to enact computational steering based on the result of downstream tasks. Decaf includes a simple Python API for describing the workflow graph. This allows Decaf to stand alone as a complete workflow system, but Decaf can also be used as the dataflow layer by one or more other workflow systems to form a heterogeneous task-based computing environment. In one experiment, we couple a molecular dynamics code with a visualization tool using the FlowVR and Damaris workflow systems and Decaf for the dataflow. In another experiment, we test the coupling of a cosmology code with Voronoi tessellation and density estimation codes using MPI for the simulation, the DIY programming model for the two analysis codes, and Decaf for the dataflow. Such workflows consisting of heterogeneous software infrastructures exist because components are developed separately with different programming models and runtimes, and this is the first time that such heterogeneous coupling of diverse components was demonstrated in situ on HPC systems.

Constructing Workflows from Script Applications

Directory of Open Access Journals (Sweden)

Mikołaj Baranowski

2012-01-01

Full Text Available For programming and executing complex applications on grid infrastructures, scientific workflows have been proposed as convenient high-level alternative to solutions based on general-purpose programming languages, APIs and scripts. GridSpace is a collaborative programming and execution environment, which is based on a scripting approach and it extends Ruby language with a high-level API for invoking operations on remote resources. In this paper we describe a tool which enables to convert the GridSpace application source code into a workflow representation which, in turn, may be used for scheduling, provenance, or visualization. We describe how we addressed the issues of analyzing Ruby source code, resolving variable and method dependencies, as well as building workflow representation. The solutions to these problems have been developed and they were evaluated by testing them on complex grid application workflows such as CyberShake, Epigenomics and Montage. Evaluation is enriched by representing typical workflow control flow patterns.

ERROR HANDLING IN INTEGRATION WORKFLOWS

Directory of Open Access Journals (Sweden)

Alexey M. Nazarenko

2017-01-01

Full Text Available Simulation experiments performed while solving multidisciplinary engineering and scientific problems require joint usage of multiple software tools. Further, when following a preset plan of experiment or searching for optimum solu- tions, the same sequence of calculations is run multiple times with various simulation parameters, input data, or conditions while overall workflow does not change. Automation of simulations like these requires implementing of a workflow where tool execution and data exchange is usually controlled by a special type of software, an integration environment or plat- form. The result is an integration workflow (a platform-dependent implementation of some computing workflow which, in the context of automation, is a composition of weakly coupled (in terms of communication intensity typical subtasks. These compositions can then be decomposed back into a few workflow patterns (types of subtasks interaction. The pat- terns, in their turn, can be interpreted as higher level subtasks.This paper considers execution control and data exchange rules that should be imposed by the integration envi- ronment in the case of an error encountered by some integrated software tool. An error is defined as any abnormal behavior of a tool that invalidates its result data thus disrupting the data flow within the integration workflow. The main requirementto the error handling mechanism implemented by the integration environment is to prevent abnormal termination of theentire workflow in case of missing intermediate results data. Error handling rules are formulated on the basic pattern level and on the level of a composite task that can combine several basic patterns as next level subtasks. The cases where workflow behavior may be different, depending on user's purposes, when an error takes place, and possible error handling op- tions that can be specified by the user are also noted in the work.

Snakemake-a scalable bioinformatics workflow engine

NARCIS (Netherlands)

J. Köster (Johannes); S. Rahmann (Sven)

2012-01-01

textabstractSnakemake is a workflow engine that provides a readable Python-based workflow definition language and a powerful execution environment that scales from single-core workstations to compute clusters without modifying the workflow. It is the first system to support the use of automatically

Multidetector-row CT: economics and workflow

International Nuclear Information System (INIS)

Pottala, K.M.; Kalra, M.K.; Saini, S.; Ouellette, K.; Sahani, D.; Thrall, J.H.

2005-01-01

With rapid evolution of multidetector-row CT (MDCT) technology and applications, several factors such ad technology upgrade and turf battles for sharing cost and profitability affect MDCT workflow and economics. MDCT workflow optimization can enhance productivity and reduce unit costs as well as increase profitability, in spite of decrease in reimbursement rates. Strategies for workflow management include standardization, automation, and constant assessment of various steps involved in MDCT operations. In this review article, we describe issues related to MDCT economics and workflow. (orig.)

Financial and workflow analysis of radiology reporting processes in the planning phase of implementation of a speech recognition system

Science.gov (United States)

Whang, Tom; Ratib, Osman M.; Umamoto, Kathleen; Grant, Edward G.; McCoy, Michael J.

2002-05-01

The goal of this study is to determine the financial value and workflow improvements achievable by replacing traditional transcription services with a speech recognition system in a large, university hospital setting. Workflow metrics were measured at two hospitals, one of which exclusively uses a transcription service (UCLA Medical Center), and the other which exclusively uses speech recognition (West Los Angeles VA Hospital). Workflow metrics include time spent per report (the sum of time spent interpreting, dictating, reviewing, and editing), transcription turnaround, and total report turnaround. Compared to traditional transcription, speech recognition resulted in radiologists spending 13-32% more time per report, but it also resulted in reduction of report turnaround time by 22-62% and reduction of marginal cost per report by 94%. The model developed here helps justify the introduction of a speech recognition system by showing that the benefits of reduced operating costs and decreased turnaround time outweigh the cost of increased time spent per report. Whether the ultimate goal is to achieve a financial objective or to improve operational efficiency, it is important to conduct a thorough analysis of workflow before implementation.

Characterizing workflow for pediatric asthma patients in emergency departments using electronic health records.

Science.gov (United States)

Ozkaynak, Mustafa; Dziadkowiec, Oliwier; Mistry, Rakesh; Callahan, Tiffany; He, Ze; Deakyne, Sara; Tham, Eric

2015-10-01

The purpose of this study was to describe a workflow analysis approach and apply it in emergency departments (EDs) using data extracted from the electronic health record (EHR) system. We used data that were obtained during 2013 from the ED of a children's hospital and its four satellite EDs. Workflow-related data were extracted for all patient visits with either a primary or secondary diagnosis on discharge of asthma (ICD-9 code=493). For each patient visit, eight different a priori time-stamped events were identified. Data were also collected on mode of arrival, patient demographics, triage score (i.e. acuity level), and primary/secondary diagnosis. Comparison groups were by acuity levels 2 and 3 with 2 being more acute than 3, arrival mode (ambulance versus walk-in), and site. Data were analyzed using a visualization method and Markov Chains. To demonstrate the viability and benefit of the approach, patient care workflows were visually and quantitatively compared. The analysis of the EHR data allowed for exploration of workflow patterns and variation across groups. Results suggest that workflow was different for different arrival modes, settings and acuity levels. EHRs can be used to explore workflow with statistical and visual analytics techniques novel to the health care setting. The results generated by the proposed approach could be utilized to help institutions identify workflow issues, plan for varied workflows and ultimately improve efficiency in caring for diverse patient groups. EHR data and novel analytic techniques in health care can expand our understanding of workflow in both large and small ED units. Copyright © 2015 Elsevier Inc. All rights reserved.

Soundness of Timed-Arc Workflow Nets in Discrete and Continuous-Time Semantics

DEFF Research Database (Denmark)

Mateo, Jose Antonio; Srba, Jiri; Sørensen, Mathias Grund

2015-01-01

Analysis of workflow processes with quantitative aspectslike timing is of interest in numerous time-critical applications. We suggest a workflow model based on timed-arc Petri nets and studythe foundational problems of soundness and strong (time-bounded) soundness.We first consider the discrete-t...

Integration of services into workflow applications

CERN Document Server

Czarnul, Pawel

2015-01-01

Describing state-of-the-art solutions in distributed system architectures, Integration of Services into Workflow Applications presents a concise approach to the integration of loosely coupled services into workflow applications. It discusses key challenges related to the integration of distributed systems and proposes solutions, both in terms of theoretical aspects such as models and workflow scheduling algorithms, and technical solutions such as software tools and APIs.The book provides an in-depth look at workflow scheduling and proposes a way to integrate several different types of services

Ferret Workflow Anomaly Detection System

National Research Council Canada - National Science Library

Smith, Timothy J; Bryant, Stephany

2005-01-01

The Ferret workflow anomaly detection system project 2003-2004 has provided validation and anomaly detection in accredited workflows in secure knowledge management systems through the use of continuous, automated audits...

Exploring Dental Providers' Workflow in an Electronic Dental Record Environment.

Science.gov (United States)

Schwei, Kelsey M; Cooper, Ryan; Mahnke, Andrea N; Ye, Zhan; Acharya, Amit

2016-01-01

A workflow is defined as a predefined set of work steps and partial ordering of these steps in any environment to achieve the expected outcome. Few studies have investigated the workflow of providers in a dental office. It is important to understand the interaction of dental providers with the existing technologies at point of care to assess breakdown in the workflow which could contribute to better technology designs. The study objective was to assess electronic dental record (EDR) workflows using time and motion methodology in order to identify breakdowns and opportunities for process improvement. A time and motion methodology was used to study the human-computer interaction and workflow of dental providers with an EDR in four dental centers at a large healthcare organization. A data collection tool was developed to capture the workflow of dental providers and staff while they interacted with an EDR during initial, planned, and emergency patient visits, and at the front desk. Qualitative and quantitative analysis was conducted on the observational data. Breakdowns in workflow were identified while posting charges, viewing radiographs, e-prescribing, and interacting with patient scheduler. EDR interaction time was significantly different between dentists and dental assistants (6:20 min vs. 10:57 min, p = 0.013) and between dentists and dental hygienists (6:20 min vs. 9:36 min, p = 0.003). On average, a dentist spent far less time than dental assistants and dental hygienists in data recording within the EDR.

Automated selected reaction monitoring data analysis workflow for large-scale targeted proteomic studies.

Science.gov (United States)

Surinova, Silvia; Hüttenhain, Ruth; Chang, Ching-Yun; Espona, Lucia; Vitek, Olga; Aebersold, Ruedi

2013-08-01

Targeted proteomics based on selected reaction monitoring (SRM) mass spectrometry is commonly used for accurate and reproducible quantification of protein analytes in complex biological mixtures. Strictly hypothesis-driven, SRM assays quantify each targeted protein by collecting measurements on its peptide fragment ions, called transitions. To achieve sensitive and accurate quantitative results, experimental design and data analysis must consistently account for the variability of the quantified transitions. This consistency is especially important in large experiments, which increasingly require profiling up to hundreds of proteins over hundreds of samples. Here we describe a robust and automated workflow for the analysis of large quantitative SRM data sets that integrates data processing, statistical protein identification and quantification, and dissemination of the results. The integrated workflow combines three software tools: mProphet for peptide identification via probabilistic scoring; SRMstats for protein significance analysis with linear mixed-effect models; and PASSEL, a public repository for storage, retrieval and query of SRM data. The input requirements for the protocol are files with SRM traces in mzXML format, and a file with a list of transitions in a text tab-separated format. The protocol is especially suited for data with heavy isotope-labeled peptide internal standards. We demonstrate the protocol on a clinical data set in which the abundances of 35 biomarker candidates were profiled in 83 blood plasma samples of subjects with ovarian cancer or benign ovarian tumors. The time frame to realize the protocol is 1-2 weeks, depending on the number of replicates used in the experiment.

Matches, Mismatches, and Methods: Multiple-View Workflows for Energy Portfolio Analysis.

Science.gov (United States)

Brehmer, Matthew; Ng, Jocelyn; Tate, Kevin; Munzner, Tamara

2016-01-01

The energy performance of large building portfolios is challenging to analyze and monitor, as current analysis tools are not scalable or they present derived and aggregated data at too coarse of a level. We conducted a visualization design study, beginning with a thorough work domain analysis and a characterization of data and task abstractions. We describe generalizable visual encoding design choices for time-oriented data framed in terms of matches and mismatches, as well as considerations for workflow design. Our designs address several research questions pertaining to scalability, view coordination, and the inappropriateness of line charts for derived and aggregated data due to a combination of data semantics and domain convention. We also present guidelines relating to familiarity and trust, as well as methodological considerations for visualization design studies. Our designs were adopted by our collaborators and incorporated into the design of an energy analysis software application that will be deployed to tens of thousands of energy workers in their client base.

It's All About the Data: Workflow Systems and Weather

Science.gov (United States)

Plale, B.

2009-05-01

Digital data is fueling new advances in the computational sciences, particularly geospatial research as environmental sensing grows more practical through reduced technology costs, broader network coverage, and better instruments. e-Science research (i.e., cyberinfrastructure research) has responded to data intensive computing with tools, systems, and frameworks that support computationally oriented activities such as modeling, analysis, and data mining. Workflow systems support execution of sequences of tasks on behalf of a scientist. These systems, such as Taverna, Apache ODE, and Kepler, when built as part of a larger cyberinfrastructure framework, give the scientist tools to construct task graphs of execution sequences, often through a visual interface for connecting task boxes together with arcs representing control flow or data flow. Unlike business processing workflows, scientific workflows expose a high degree of detail and control during configuration and execution. Data-driven science imposes unique needs on workflow frameworks. Our research is focused on two issues. The first is the support for workflow-driven analysis over all kinds of data sets, including real time streaming data and locally owned and hosted data. The second is the essential role metadata/provenance collection plays in data driven science, for discovery, determining quality, for science reproducibility, and for long-term preservation. The research has been conducted over the last 6 years in the context of cyberinfrastructure for mesoscale weather research carried out as part of the Linked Environments for Atmospheric Discovery (LEAD) project. LEAD has pioneered new approaches for integrating complex weather data, assimilation, modeling, mining, and cyberinfrastructure systems. Workflow systems have the potential to generate huge volumes of data. Without some form of automated metadata capture, either metadata description becomes largely a manual task that is difficult if not impossible

Selecting Sample Preparation Workflows for Mass Spectrometry-Based Proteomic and Phosphoproteomic Analysis of Patient Samples with Acute Myeloid Leukemia.

Science.gov (United States)

Hernandez-Valladares, Maria; Aasebø, Elise; Selheim, Frode; Berven, Frode S; Bruserud, Øystein

2016-08-22

Global mass spectrometry (MS)-based proteomic and phosphoproteomic studies of acute myeloid leukemia (AML) biomarkers represent a powerful strategy to identify and confirm proteins and their phosphorylated modifications that could be applied in diagnosis and prognosis, as a support for individual treatment regimens and selection of patients for bone marrow transplant. MS-based studies require optimal and reproducible workflows that allow a satisfactory coverage of the proteome and its modifications. Preparation of samples for global MS analysis is a crucial step and it usually requires method testing, tuning and optimization. Different proteomic workflows that have been used to prepare AML patient samples for global MS analysis usually include a standard protein in-solution digestion procedure with a urea-based lysis buffer. The enrichment of phosphopeptides from AML patient samples has previously been carried out either with immobilized metal affinity chromatography (IMAC) or metal oxide affinity chromatography (MOAC). We have recently tested several methods of sample preparation for MS analysis of the AML proteome and phosphoproteome and introduced filter-aided sample preparation (FASP) as a superior methodology for the sensitive and reproducible generation of peptides from patient samples. FASP-prepared peptides can be further fractionated or IMAC-enriched for proteome or phosphoproteome analyses. Herein, we will review both in-solution and FASP-based sample preparation workflows and encourage the use of the latter for the highest protein and phosphorylation coverage and reproducibility.

Dissecting an alternative splicing analysis workflow for GeneChip® Exon 1.0 ST Affymetrix arrays

Directory of Open Access Journals (Sweden)

Calogero Raffaele A

2008-11-01

Full Text Available Abstract Background A new microarray platform (GeneChip® Exon 1.0 ST has recently been developed by Affymetrix http://www.affymetrix.com. This microarray platform changes the conventional view of transcript analysis since it allows the evaluation of the expression level of a transcript by querying each exon component. The Exon 1.0 ST platform does however raise some issues regarding the approaches to be used in identifying genome-wide alternative splicing events (ASEs. In this study an exon-level data analysis workflow is dissected in order to detect limit and strength of each step, thus modifying the overall workflow and thereby optimizing the detection of ASEs. Results This study was carried out using a semi-synthetic exon-skipping benchmark experiment embedding a total of 268 exon skipping events. Our results point out that summarization methods (RMA, PLIER do not affect the efficacy of statistical tools in detecting ASEs. However, data pre-filtering is mandatory if the detected number of false ASEs are to be reduced. MiDAS and Rank Product methods efficiently detect true ASEs but they suffer from the lack of multiple test error correction. The intersection of MiDAS and Rank Product results efficiently moderates the detection of false ASEs. Conclusion To optimize the detection of ASEs we propose the following workflow: i data pre-filtering, ii statistical selection of ASEs using both MiDAS and Rank Product, iii intersection of results derived from the two statistical analyses in order to moderate family-wise errors (FWER.

Radiology information system: a workflow-based approach

International Nuclear Information System (INIS)

Zhang, Jinyan; Lu, Xudong; Nie, Hongchao; Huang, Zhengxing; Aalst, W.M.P. van der

2009-01-01

Introducing workflow management technology in healthcare seems to be prospective in dealing with the problem that the current healthcare Information Systems cannot provide sufficient support for the process management, although several challenges still exist. The purpose of this paper is to study the method of developing workflow-based information system in radiology department as a use case. First, a workflow model of typical radiology process was established. Second, based on the model, the system could be designed and implemented as a group of loosely coupled components. Each component corresponded to one task in the process and could be assembled by the workflow management system. The legacy systems could be taken as special components, which also corresponded to the tasks and were integrated through transferring non-work- flow-aware interfaces to the standard ones. Finally, a workflow dashboard was designed and implemented to provide an integral view of radiology processes. The workflow-based Radiology Information System was deployed in the radiology department of Zhejiang Chinese Medicine Hospital in China. The results showed that it could be adjusted flexibly in response to the needs of changing process, and enhance the process management in the department. It can also provide a more workflow-aware integration method, comparing with other methods such as IHE-based ones. The workflow-based approach is a new method of developing radiology information system with more flexibility, more functionalities of process management and more workflow-aware integration. The work of this paper is an initial endeavor for introducing workflow management technology in healthcare. (orig.)

Text mining for the biocuration workflow.

Science.gov (United States)

Hirschman, Lynette; Burns, Gully A P C; Krallinger, Martin; Arighi, Cecilia; Cohen, K Bretonnel; Valencia, Alfonso; Wu, Cathy H; Chatr-Aryamontri, Andrew; Dowell, Karen G; Huala, Eva; Lourenço, Anália; Nash, Robert; Veuthey, Anne-Lise; Wiegers, Thomas; Winter, Andrew G

2012-01-01

Molecular biology has become heavily dependent on biological knowledge encoded in expert curated biological databases. As the volume of biological literature increases, biocurators need help in keeping up with the literature; (semi-) automated aids for biocuration would seem to be an ideal application for natural language processing and text mining. However, to date, there have been few documented successes for improving biocuration throughput using text mining. Our initial investigations took place for the workshop on 'Text Mining for the BioCuration Workflow' at the third International Biocuration Conference (Berlin, 2009). We interviewed biocurators to obtain workflows from eight biological databases. This initial study revealed high-level commonalities, including (i) selection of documents for curation; (ii) indexing of documents with biologically relevant entities (e.g. genes); and (iii) detailed curation of specific relations (e.g. interactions); however, the detailed workflows also showed many variabilities. Following the workshop, we conducted a survey of biocurators. The survey identified biocurator priorities, including the handling of full text indexed with biological entities and support for the identification and prioritization of documents for curation. It also indicated that two-thirds of the biocuration teams had experimented with text mining and almost half were using text mining at that time. Analysis of our interviews and survey provide a set of requirements for the integration of text mining into the biocuration workflow. These can guide the identification of common needs across curated databases and encourage joint experimentation involving biocurators, text mining developers and the larger biomedical research community.

Fastr: a workflow engine for advanced data flows in medical image analysis

Directory of Open Access Journals (Sweden)

Hakim Christiaan Achterberg

2016-08-01

Full Text Available With the increasing number of datasets encountered in imaging studies, the increasingcomplexity of processing workflows, and a growing awareness for data stewardship, thereis a need for managed, automated workflows. In this paper we introduce Fastr, an automatedworkflow engine with support for advanced data flows. Fastr has built-in data provenance forrecording processing trails and ensuring reproducible results. The extensible plugin-based designallows the system to interface with virtually any image archive and processing infrastructure. Thisworkflow engine is designed to consolidate quantitative imaging biomarker pipelines in order toenable easy application to new data.

Development of the workflow kine systems for support on KAIZEN.

Science.gov (United States)

Mizuno, Yuki; Ito, Toshihiko; Yoshikawa, Toru; Yomogida, Satoshi; Morio, Koji; Sakai, Kazuhiro

2012-01-01

In this paper, we introduce the new workflow line system consisted of the location and image recording, which led to the acquisition of workflow information and the analysis display. From the results of workflow line investigation, we considered the anticipated effects and the problems on KAIZEN. Workflow line information included the location information and action contents information. These technologies suggest the viewpoints to help improvement, for example, exclusion of useless movement, the redesign of layout and the review of work procedure. Manufacturing factory, it was clear that there was much movement from the standard operation place and accumulation residence time. The following was shown as a result of this investigation, to be concrete, the efficient layout was suggested by this system. In the case of the hospital, similarly, it is pointed out that the workflow has the problem of layout and setup operations based on the effective movement pattern of the experts. This system could adapt to routine work, including as well as non-routine work. By the development of this system which can fit and adapt to industrial diversification, more effective "visual management" (visualization of work) is expected in the future.

Developing a Workflow Composite Score to Measure Clinical Information Logistics. A Top-down Approach.

Science.gov (United States)

Liebe, J D; Hübner, U; Straede, M C; Thye, J

2015-01-01

Availability and usage of individual IT applications have been studied intensively in the past years. Recently, IT support of clinical processes is attaining increasing attention. The underlying construct that describes the IT support of clinical workflows is clinical information logistics. This construct needs to be better understood, operationalised and measured. It is therefore the aim of this study to propose and develop a workflow composite score (WCS) for measuring clinical information logistics and to examine its quality based on reliability and validity analyses. We largely followed the procedural model of MacKenzie and colleagues (2011) for defining and conceptualising the construct domain, for developing the measurement instrument, assessing the content validity, pretesting the instrument, specifying the model, capturing the data and computing the WCS and testing the reliability and validity. Clinical information logistics was decomposed into the descriptors data and information, function, integration and distribution, which embraced the framework validated by an analysis of the international literature. This framework was refined selecting representative clinical processes. We chose ward rounds, pre- and post-surgery processes and discharge as sample processes that served as concrete instances for the measurements. They are sufficiently complex, represent core clinical processes and involve different professions, departments and settings. The score was computed on the basis of data from 183 hospitals of different size, ownership, location and teaching status. Testing the reliability and validity yielded encouraging results: the reliability was high with r(split-half) = 0.89, the WCS discriminated between groups; the WCS correlated significantly and moderately with two EHR models and the WCS received good evaluation results by a sample of chief information officers (n = 67). These findings suggest the further utilisation of the WCS. As the WCS does not

Exploring Dental Providers’ Workflow in an Electronic Dental Record Environment

Science.gov (United States)

Schwei, Kelsey M; Cooper, Ryan; Mahnke, Andrea N.; Ye, Zhan

2016-01-01

Summary Background A workflow is defined as a predefined set of work steps and partial ordering of these steps in any environment to achieve the expected outcome. Few studies have investigated the workflow of providers in a dental office. It is important to understand the interaction of dental providers with the existing technologies at point of care to assess breakdown in the workflow which could contribute to better technology designs. Objective The study objective was to assess electronic dental record (EDR) workflows using time and motion methodology in order to identify breakdowns and opportunities for process improvement. Methods A time and motion methodology was used to study the human-computer interaction and workflow of dental providers with an EDR in four dental centers at a large healthcare organization. A data collection tool was developed to capture the workflow of dental providers and staff while they interacted with an EDR during initial, planned, and emergency patient visits, and at the front desk. Qualitative and quantitative analysis was conducted on the observational data. Results Breakdowns in workflow were identified while posting charges, viewing radiographs, e-prescribing, and interacting with patient scheduler. EDR interaction time was significantly different between dentists and dental assistants (6:20 min vs. 10:57 min, p = 0.013) and between dentists and dental hygienists (6:20 min vs. 9:36 min, p = 0.003). Conclusions On average, a dentist spent far less time than dental assistants and dental hygienists in data recording within the EDR. PMID:27437058

Galaxy Workflows for Web-based Bioinformatics Analysis of Aptamer High-throughput Sequencing Data

Directory of Open Access Journals (Sweden)

William H Thiel

2016-01-01

Full Text Available Development of RNA and DNA aptamers for diagnostic and therapeutic applications is a rapidly growing field. Aptamers are identified through iterative rounds of selection in a process termed SELEX (Systematic Evolution of Ligands by EXponential enrichment. High-throughput sequencing (HTS revolutionized the modern SELEX process by identifying millions of aptamer sequences across multiple rounds of aptamer selection. However, these vast aptamer HTS datasets necessitated bioinformatics techniques. Herein, we describe a semiautomated approach to analyze aptamer HTS datasets using the Galaxy Project, a web-based open source collection of bioinformatics tools that were originally developed to analyze genome, exome, and transcriptome HTS data. Using a series of Workflows created in the Galaxy webserver, we demonstrate efficient processing of aptamer HTS data and compilation of a database of unique aptamer sequences. Additional Workflows were created to characterize the abundance and persistence of aptamer sequences within a selection and to filter sequences based on these parameters. A key advantage of this approach is that the online nature of the Galaxy webserver and its graphical interface allow for the analysis of HTS data without the need to compile code or install multiple programs.

Nationwide Buildings Energy Research enabled through an integrated Data Intensive Scientific Workflow and Advanced Analysis Environment

Energy Technology Data Exchange (ETDEWEB)

Kleese van Dam, Kerstin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lansing, Carina S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elsethagen, Todd O. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hathaway, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Guillen, Zoe C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dirks, James A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Skorski, Daniel C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephan, Eric G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gorrissen, Willy J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gorton, Ian [Carnegie Mellon Univ., Pittsburgh, PA (United States); Liu, Yan [Concordia Univ., Montreal, QC (Canada)

2014-01-28

Modern workflow systems enable scientists to run ensemble simulations at unprecedented scales and levels of complexity, allowing them to study system sizes previously impossible to achieve, due to the inherent resource requirements needed for the modeling work. However as a result of these new capabilities the science teams suddenly also face unprecedented data volumes that they are unable to analyze with their existing tools and methodologies in a timely fashion. In this paper we will describe the ongoing development work to create an integrated data intensive scientific workflow and analysis environment that offers researchers the ability to easily create and execute complex simulation studies and provides them with different scalable methods to analyze the resulting data volumes. The integration of simulation and analysis environments is hereby not only a question of ease of use, but supports fundamental functions in the correlated analysis of simulation input, execution details and derived results for multi-variant, complex studies. To this end the team extended and integrated the existing capabilities of the Velo data management and analysis infrastructure, the MeDICi data intensive workflow system and RHIPE the R for Hadoop version of the well-known statistics package, as well as developing a new visual analytics interface for the result exploitation by multi-domain users. The capabilities of the new environment are demonstrated on a use case that focusses on the Pacific Northwest National Laboratory (PNNL) building energy team, showing how they were able to take their previously local scale simulations to a nationwide level by utilizing data intensive computing techniques not only for their modeling work, but also for the subsequent analysis of their modeling results. As part of the PNNL research initiative PRIMA (Platform for Regional Integrated Modeling and Analysis) the team performed an initial 3 year study of building energy demands for the US Eastern

Modeling workflow to design machine translation applications for public health practice.

Science.gov (United States)

Turner, Anne M; Brownstein, Megumu K; Cole, Kate; Karasz, Hilary; Kirchhoff, Katrin

2015-02-01

Provide a detailed understanding of the information workflow processes related to translating health promotion materials for limited English proficiency individuals in order to inform the design of context-driven machine translation (MT) tools for public health (PH). We applied a cognitive work analysis framework to investigate the translation information workflow processes of two large health departments in Washington State. Researchers conducted interviews, performed a task analysis, and validated results with PH professionals to model translation workflow and identify functional requirements for a translation system for PH. The study resulted in a detailed description of work related to translation of PH materials, an information workflow diagram, and a description of attitudes towards MT technology. We identified a number of themes that hold design implications for incorporating MT in PH translation practice. A PH translation tool prototype was designed based on these findings. This study underscores the importance of understanding the work context and information workflow for which systems will be designed. Based on themes and translation information workflow processes, we identified key design guidelines for incorporating MT into PH translation work. Primary amongst these is that MT should be followed by human review for translations to be of high quality and for the technology to be adopted into practice. The time and costs of creating multilingual health promotion materials are barriers to translation. PH personnel were interested in MT's potential to improve access to low-cost translated PH materials, but expressed concerns about ensuring quality. We outline design considerations and a potential machine translation tool to best fit MT systems into PH practice. Copyright © 2014 Elsevier Inc. All rights reserved.

Accelerating the scientific exploration process with scientific workflows

International Nuclear Information System (INIS)

Altintas, Ilkay; Barney, Oscar; Cheng, Zhengang; Critchlow, Terence; Ludaescher, Bertram; Parker, Steve; Shoshani, Arie; Vouk, Mladen

2006-01-01

Although an increasing amount of middleware has emerged in the last few years to achieve remote data access, distributed job execution, and data management, orchestrating these technologies with minimal overhead still remains a difficult task for scientists. Scientific workflow systems improve this situation by creating interfaces to a variety of technologies and automating the execution and monitoring of the workflows. Workflow systems provide domain-independent customizable interfaces and tools that combine different tools and technologies along with efficient methods for using them. As simulations and experiments move into the petascale regime, the orchestration of long running data and compute intensive tasks is becoming a major requirement for the successful steering and completion of scientific investigations. A scientific workflow is the process of combining data and processes into a configurable, structured set of steps that implement semi-automated computational solutions of a scientific problem. Kepler is a cross-project collaboration, co-founded by the SciDAC Scientific Data Management (SDM) Center, whose purpose is to develop a domain-independent scientific workflow system. It provides a workflow environment in which scientists design and execute scientific workflows by specifying the desired sequence of computational actions and the appropriate data flow, including required data transformations, between these steps. Currently deployed workflows range from local analytical pipelines to distributed, high-performance and high-throughput applications, which can be both data- and compute-intensive. The scientific workflow approach offers a number of advantages over traditional scripting-based approaches, including ease of configuration, improved reusability and maintenance of workflows and components (called actors), automated provenance management, 'smart' re-running of different versions of workflow instances, on-the-fly updateable parameters, monitoring

Workflow Support for Advanced Grid-Enabled Computing

OpenAIRE

Xu, Fenglian; Eres, M.H.; Tao, Feng; Cox, Simon J.

2004-01-01

The Geodise project brings computer scientists and engineer's skills together to build up a service-oriented computing environmnet for engineers to perform complicated computations in a distributed system. The workflow tool is a front GUI to provide a full life cycle of workflow functions for Grid-enabled computing. The full life cycle of workflow functions have been enhanced based our initial research and development. The life cycle starts with a composition of a workflow, followed by an ins...

Automatic support for product based workflow design : generation of process models from a product data model

NARCIS (Netherlands)

Vanderfeesten, I.T.P.; Reijers, H.A.; Aalst, van der W.M.P.; Vogelaar, J.J.C.L.; Meersman, R.; Dillon, T.; Herrero, P.

2010-01-01

Product Based Workflow Design (PBWD) is one of the few scientific methodologies for the (re)design of workflow processes. It is based on an analysis of the product that is produced in the workflow process and derives a process model from the product structure. Until now this derivation has been a

Behavioral technique for workflow abstraction and matching

NARCIS (Netherlands)

Klai, K.; Ould Ahmed M'bareck, N.; Tata, S.; Dustdar, S.; Fiadeiro, J.L.; Sheth, A.

2006-01-01

This work is in line with the CoopFlow approach dedicated for workflow advertisement, interconnection, and cooperation in virtual organizations. In order to advertise workflows into a registry, we present in this paper a novel method to abstract behaviors of workflows into symbolic observation

A performance study of grid workflow engines

NARCIS (Netherlands)

Stratan, C.; Iosup, A.; Epema, D.H.J.

2008-01-01

To benefit from grids, scientists require grid workflow engines that automatically manage the execution of inter-related jobs on the grid infrastructure. So far, the workflows community has focused on scheduling algorithms and on interface tools. Thus, while several grid workflow engines have been

Workflow Management in CLARIN-DK

DEFF Research Database (Denmark)

Jongejan, Bart

2013-01-01

The CLARIN-DK infrastructure is not only a repository of resources, but also a place where users can analyse, annotate, reformat and potentially even translate resources, using tools that are integrated in the infrastructure as web services. In many cases a single tool does not produce the desired...... with the features that describe her goal, because the workflow manager not only executes chains of tools in a workflow, but also takes care of autonomously devising workflows that serve the user’s intention, given the tools that currently are integrated in the infrastructure as web services. To do this...

Selecting Sample Preparation Workflows for Mass Spectrometry-Based Proteomic and Phosphoproteomic Analysis of Patient Samples with Acute Myeloid Leukemia

Directory of Open Access Journals (Sweden)

Maria Hernandez-Valladares

2016-08-01

Full Text Available Global mass spectrometry (MS-based proteomic and phosphoproteomic studies of acute myeloid leukemia (AML biomarkers represent a powerful strategy to identify and confirm proteins and their phosphorylated modifications that could be applied in diagnosis and prognosis, as a support for individual treatment regimens and selection of patients for bone marrow transplant. MS-based studies require optimal and reproducible workflows that allow a satisfactory coverage of the proteome and its modifications. Preparation of samples for global MS analysis is a crucial step and it usually requires method testing, tuning and optimization. Different proteomic workflows that have been used to prepare AML patient samples for global MS analysis usually include a standard protein in-solution digestion procedure with a urea-based lysis buffer. The enrichment of phosphopeptides from AML patient samples has previously been carried out either with immobilized metal affinity chromatography (IMAC or metal oxide affinity chromatography (MOAC. We have recently tested several methods of sample preparation for MS analysis of the AML proteome and phosphoproteome and introduced filter-aided sample preparation (FASP as a superior methodology for the sensitive and reproducible generation of peptides from patient samples. FASP-prepared peptides can be further fractionated or IMAC-enriched for proteome or phosphoproteome analyses. Herein, we will review both in-solution and FASP-based sample preparation workflows and encourage the use of the latter for the highest protein and phosphorylation coverage and reproducibility.

The Taverna workflow suite: designing and executing workflows of Web Services on the desktop, web or in the cloud

NARCIS (Netherlands)

Wolstencroft, K.; Haines, R.; Fellows, D.; Williams, A.; Withers, D.; Owen, S.; Soiland-Reyes, S.; Dunlop, I.; Nenadic, A.; Fisher, P.; Bhagat, J.; Belhajjame, K.; Bacall, F.; Hardisty, A.; Nieva de la Hidalga, A.; Balcazar Vargas, M.P.; Sufi, S.; Goble, C.

2013-01-01

The Taverna workflow tool suite (http://www.taverna.org.uk) is designed to combine distributed Web Services and/or local tools into complex analysis pipelines. These pipelines can be executed on local desktop machines or through larger infrastructure (such as supercomputers, Grids or cloud

A framework for service enterprise workflow simulation with multi-agents cooperation

Science.gov (United States)

Tan, Wenan; Xu, Wei; Yang, Fujun; Xu, Lida; Jiang, Chuanqun

2013-11-01

Process dynamic modelling for service business is the key technique for Service-Oriented information systems and service business management, and the workflow model of business processes is the core part of service systems. Service business workflow simulation is the prevalent approach to be used for analysis of service business process dynamically. Generic method for service business workflow simulation is based on the discrete event queuing theory, which is lack of flexibility and scalability. In this paper, we propose a service workflow-oriented framework for the process simulation of service businesses using multi-agent cooperation to address the above issues. Social rationality of agent is introduced into the proposed framework. Adopting rationality as one social factor for decision-making strategies, a flexible scheduling for activity instances has been implemented. A system prototype has been developed to validate the proposed simulation framework through a business case study.

Integration of the radiotherapy irradiation planning in the digital workflow

International Nuclear Information System (INIS)

Roehner, F.; Schmucker, M.; Henne, K.; Bruggmoser, G.; Grosu, A.L.; Frommhold, H.; Heinemann, F.E.; Momm, F.

2013-01-01

Background and purpose: At the Clinic of Radiotherapy at the University Hospital Freiburg, all relevant workflow is paperless. After implementing the Operating Schedule System (OSS) as a framework, all processes are being implemented into the departmental system MOSAIQ. Designing a digital workflow for radiotherapy irradiation planning is a large challenge, it requires interdisciplinary expertise and therefore the interfaces between the professions also have to be interdisciplinary. For every single step of radiotherapy irradiation planning, distinct responsibilities have to be defined and documented. All aspects of digital storage, backup and long-term availability of data were considered and have already been realized during the OSS project. Method: After an analysis of the complete workflow and the statutory requirements, a detailed project plan was designed. In an interdisciplinary workgroup, problems were discussed and a detailed flowchart was developed. The new functionalities were implemented in a testing environment by the Clinical and Administrative IT Department (CAI). After extensive tests they were integrated into the new modular department system. Results and conclusion: The Clinic of Radiotherapy succeeded in realizing a completely digital workflow for radiotherapy irradiation planning. During the testing phase, our digital workflow was examined and afterwards was approved by the responsible authority. (orig.)

CMS Distributed Computing Workflow Experience

CERN Document Server

Haas, Jeffrey David

2010-01-01

The vast majority of the CMS Computing capacity, which is organized in a tiered hierarchy, is located away from CERN. The 7 Tier-1 sites archive the LHC proton-proton collision data that is initially processed at CERN. These sites provide access to all recorded and simulated data for the Tier-2 sites, via wide-area network (WAN) transfers. All central data processing workflows are executed at the Tier-1 level, which contain re-reconstruction and skimming workflows of collision data as well as reprocessing of simulated data to adapt to changing detector conditions. This paper describes the operation of the CMS processing infrastructure at the Tier-1 level. The Tier-1 workflows are described in detail. The operational optimization of resource usage is described. In particular, the variation of different workflows during the data taking period of 2010, their efficiencies and latencies as well as their impact on the delivery of physics results is discussed and lessons are drawn from this experience. The simul...

From Requirements via Colored Workflow Nets to an Implementation in Several Workflow Systems

DEFF Research Database (Denmark)

Mans, Ronny S.; van der Aalst, Willibrordus Martinus Pancratius; Molemann, A.J.

2007-01-01

Care organizations, such as hospitals, need to support complex and dynamic workflows. More- over, many disciplines are involved. This makes it important to avoid the typical disconnect between requirements and the actual implementation of the system. This paper proposes an approach where an Execu......Care organizations, such as hospitals, need to support complex and dynamic workflows. More- over, many disciplines are involved. This makes it important to avoid the typical disconnect between requirements and the actual implementation of the system. This paper proposes an approach where...... an Executable Use Case (EUC) and Colored Care organizations, such as hospitals, need to support complex and dynamic workflows. Moreover, many disciplines are involved. This makes it important to avoid the typical disconnect between requirements and the actual implementation of the system. This paper proposes...

The PBase Scientific Workflow Provenance Repository

Directory of Open Access Journals (Sweden)

Víctor Cuevas-Vicenttín

2014-10-01

Full Text Available Scientific workflows and their supporting systems are becoming increasingly popular for compute-intensive and data-intensive scientific experiments. The advantages scientific workflows offer include rapid and easy workflow design, software and data reuse, scalable execution, sharing and collaboration, and other advantages that altogether facilitate “reproducible science”. In this context, provenance – information about the origin, context, derivation, ownership, or history of some artifact – plays a key role, since scientists are interested in examining and auditing the results of scientific experiments. However, in order to perform such analyses on scientific results as part of extended research collaborations, an adequate environment and tools are required. Concretely, the need arises for a repository that will facilitate the sharing of scientific workflows and their associated execution traces in an interoperable manner, also enabling querying and visualization. Furthermore, such functionality should be supported while taking performance and scalability into account. With this purpose in mind, we introduce PBase: a scientific workflow provenance repository implementing the ProvONE proposed standard, which extends the emerging W3C PROV standard for provenance data with workflow specific concepts. PBase is built on the Neo4j graph database, thus offering capabilities such as declarative and efficient querying. Our experiences demonstrate the power gained by supporting various types of queries for provenance data. In addition, PBase is equipped with a user friendly interface tailored for the visualization of scientific workflow provenance data, making the specification of queries and the interpretation of their results easier and more effective.

DIANA-microT web server v5.0: service integration into miRNA functional analysis workflows.

Science.gov (United States)

Paraskevopoulou, Maria D; Georgakilas, Georgios; Kostoulas, Nikos; Vlachos, Ioannis S; Vergoulis, Thanasis; Reczko, Martin; Filippidis, Christos; Dalamagas, Theodore; Hatzigeorgiou, A G

2013-07-01

MicroRNAs (miRNAs) are small endogenous RNA molecules that regulate gene expression through mRNA degradation and/or translation repression, affecting many biological processes. DIANA-microT web server (http://www.microrna.gr/webServer) is dedicated to miRNA target prediction/functional analysis, and it is being widely used from the scientific community, since its initial launch in 2009. DIANA-microT v5.0, the new version of the microT server, has been significantly enhanced with an improved target prediction algorithm, DIANA-microT-CDS. It has been updated to incorporate miRBase version 18 and Ensembl version 69. The in silico-predicted miRNA-gene interactions in Homo sapiens, Mus musculus, Drosophila melanogaster and Caenorhabditis elegans exceed 11 million in total. The web server was completely redesigned, to host a series of sophisticated workflows, which can be used directly from the on-line web interface, enabling users without the necessary bioinformatics infrastructure to perform advanced multi-step functional miRNA analyses. For instance, one available pipeline performs miRNA target prediction using different thresholds and meta-analysis statistics, followed by pathway enrichment analysis. DIANA-microT web server v5.0 also supports a complete integration with the Taverna Workflow Management System (WMS), using the in-house developed DIANA-Taverna Plug-in. This plug-in provides ready-to-use modules for miRNA target prediction and functional analysis, which can be used to form advanced high-throughput analysis pipelines.

Towards better digital pathology workflows: programming libraries for high-speed sharpness assessment of Whole Slide Images.

Science.gov (United States)

Ameisen, David; Deroulers, Christophe; Perrier, Valérie; Bouhidel, Fatiha; Battistella, Maxime; Legrès, Luc; Janin, Anne; Bertheau, Philippe; Yunès, Jean-Baptiste

2014-01-01

Since microscopic slides can now be automatically digitized and integrated in the clinical workflow, quality assessment of Whole Slide Images (WSI) has become a crucial issue. We present a no-reference quality assessment method that has been thoroughly tested since 2010 and is under implementation in multiple sites, both public university-hospitals and private entities. It is part of the FlexMIm R&D project which aims to improve the global workflow of digital pathology. For these uses, we have developed two programming libraries, in Java and Python, which can be integrated in various types of WSI acquisition systems, viewers and image analysis tools. Development and testing have been carried out on a MacBook Pro i7 and on a bi-Xeon 2.7GHz server. Libraries implementing the blur assessment method have been developed in Java, Python, PHP5 and MySQL5. For web applications, JavaScript, Ajax, JSON and Sockets were also used, as well as the Google Maps API. Aperio SVS files were converted into the Google Maps format using VIPS and Openslide libraries. We designed the Java library as a Service Provider Interface (SPI), extendable by third parties. Analysis is computed in real-time (3 billion pixels per minute). Tests were made on 5000 single images, 200 NDPI WSI, 100 Aperio SVS WSI converted to the Google Maps format. Applications based on our method and libraries can be used upstream, as calibration and quality control tool for the WSI acquisition systems, or as tools to reacquire tiles while the WSI is being scanned. They can also be used downstream to reacquire the complete slides that are below the quality threshold for surgical pathology analysis. WSI may also be displayed in a smarter way by sending and displaying the regions of highest quality before other regions. Such quality assessment scores could be integrated as WSI's metadata shared in clinical, research or teaching contexts, for a more efficient medical informatics workflow.

Towards better digital pathology workflows: programming libraries for high-speed sharpness assessment of Whole Slide Images

Science.gov (United States)

2014-01-01

Background Since microscopic slides can now be automatically digitized and integrated in the clinical workflow, quality assessment of Whole Slide Images (WSI) has become a crucial issue. We present a no-reference quality assessment method that has been thoroughly tested since 2010 and is under implementation in multiple sites, both public university-hospitals and private entities. It is part of the FlexMIm R&D project which aims to improve the global workflow of digital pathology. For these uses, we have developed two programming libraries, in Java and Python, which can be integrated in various types of WSI acquisition systems, viewers and image analysis tools. Methods Development and testing have been carried out on a MacBook Pro i7 and on a bi-Xeon 2.7GHz server. Libraries implementing the blur assessment method have been developed in Java, Python, PHP5 and MySQL5. For web applications, JavaScript, Ajax, JSON and Sockets were also used, as well as the Google Maps API. Aperio SVS files were converted into the Google Maps format using VIPS and Openslide libraries. Results We designed the Java library as a Service Provider Interface (SPI), extendable by third parties. Analysis is computed in real-time (3 billion pixels per minute). Tests were made on 5000 single images, 200 NDPI WSI, 100 Aperio SVS WSI converted to the Google Maps format. Conclusions Applications based on our method and libraries can be used upstream, as calibration and quality control tool for the WSI acquisition systems, or as tools to reacquire tiles while the WSI is being scanned. They can also be used downstream to reacquire the complete slides that are below the quality threshold for surgical pathology analysis. WSI may also be displayed in a smarter way by sending and displaying the regions of highest quality before other regions. Such quality assessment scores could be integrated as WSI's metadata shared in clinical, research or teaching contexts, for a more efficient medical informatics

Digital workflows in contemporary orthodontics

Directory of Open Access Journals (Sweden)

Lars R Christensen

2017-01-01

Full Text Available Digital workflows are now increasingly possible in orthodontic practice. Workflows designed to improve the customization of orthodontic appliances are now available through laboratories and orthodontic manufacturing facilities in many parts of the world. These now have the potential to improve certain aspects of patient care.

Brain-wide mapping of axonal connections: workflow for automated detection and spatial analysis of labeling in microscopic sections

Directory of Open Access Journals (Sweden)

Eszter Agnes ePapp

2016-04-01

Full Text Available Axonal tracing techniques are powerful tools for exploring the structural organization of neuronal connections. Tracers such as biotinylated dextran amine (BDA and Phaseolus vulgaris leucoagglutinin (Pha-L allow brain-wide mapping of connections through analysis of large series of histological section images. We present a workflow for efficient collection and analysis of tract-tracing datasets with a focus on newly developed modules for image processing and assignment of anatomical location to tracing data. New functionality includes automatic detection of neuronal labeling in large image series, alignment of images to a volumetric brain atlas, and analytical tools for measuring the position and extent of labeling. To evaluate the workflow, we used high-resolution microscopic images from axonal tracing experiments in which different parts of the rat primary somatosensory cortex had been injected with BDA or Pha-L. Parameters from a set of representative images were used to automate detection of labeling in image series covering the entire brain, resulting in binary maps of the distribution of labeling. For high to medium labeling densities, automatic detection was found to provide reliable results when compared to manual analysis, whereas weak labeling required manual curation for optimal detection. To identify brain regions corresponding to labeled areas, section images were aligned to the Waxholm Space (WHS atlas of the Sprague Dawley rat brain (v2 by custom-angle slicing of the MRI template to match individual sections. Based on the alignment, WHS coordinates were obtained for labeled elements and transformed to stereotaxic coordinates. The new workflow modules increase the efficiency and reliability of labeling detection in large series of images from histological sections, and enable anchoring to anatomical atlases for further spatial analysis and comparison with other data.

A Distributed Collaborative Workflow Based Approach to Data Collection and Analysis

National Research Council Canada - National Science Library

Gerecke, William; Enas, Douglas; Gottschlich, Susan

2004-01-01

...) and Modeling and Simulation (M&S) systems and architectures. In our work we have found that in order to be maximally effective, these capabilities must be designed with the military user workflow process in mind...

Bridging ImmunoGenomic Data Analysis Workflow Gaps (BIGDAWG): An integrated case-control analysis pipeline.

Science.gov (United States)

Pappas, Derek J; Marin, Wesley; Hollenbach, Jill A; Mack, Steven J

2016-03-01

Bridging ImmunoGenomic Data-Analysis Workflow Gaps (BIGDAWG) is an integrated data-analysis pipeline designed for the standardized analysis of highly-polymorphic genetic data, specifically for the HLA and KIR genetic systems. Most modern genetic analysis programs are designed for the analysis of single nucleotide polymorphisms, but the highly polymorphic nature of HLA and KIR data require specialized methods of data analysis. BIGDAWG performs case-control data analyses of highly polymorphic genotype data characteristic of the HLA and KIR loci. BIGDAWG performs tests for Hardy-Weinberg equilibrium, calculates allele frequencies and bins low-frequency alleles for k×2 and 2×2 chi-squared tests, and calculates odds ratios, confidence intervals and p-values for each allele. When multi-locus genotype data are available, BIGDAWG estimates user-specified haplotypes and performs the same binning and statistical calculations for each haplotype. For the HLA loci, BIGDAWG performs the same analyses at the individual amino-acid level. Finally, BIGDAWG generates figures and tables for each of these comparisons. BIGDAWG obviates the error-prone reformatting needed to traffic data between multiple programs, and streamlines and standardizes the data-analysis process for case-control studies of highly polymorphic data. BIGDAWG has been implemented as the bigdawg R package and as a free web application at bigdawg.immunogenomics.org. Copyright © 2015 American Society for Histocompatibility and Immunogenetics. Published by Elsevier Inc. All rights reserved.

Barriers to critical thinking: workflow interruptions and task switching among nurses.

Science.gov (United States)

Cornell, Paul; Riordan, Monica; Townsend-Gervis, Mary; Mobley, Robin

2011-10-01

Nurses are increasingly called upon to engage in critical thinking. However, current workflow inhibits this goal with frequent task switching and unpredictable demands. To assess workflow's cognitive impact, nurses were observed at 2 hospitals with different patient loads and acuity levels. Workflow on a medical/surgical and pediatric oncology unit was observed, recording tasks, tools, collaborators, and locations. Nineteen nurses were observed for a total of 85.2 hours. Tasks were short with a mean duration of 62.4 and 81.6 seconds on the 2 units. More than 50% of the recorded tasks were less than 30 seconds in length. An analysis of task sequence revealed few patterns and little pairwise repetition. Performance on specific tasks differed between the 2 units, but the character of the workflow was highly similar. The nonrepetitive flow and high amount of switching indicate nurses experience a heavy cognitive load with little uninterrupted time. This implies that nurses rarely have the conditions necessary for critical thinking.

xGDBvm: A Web GUI-Driven Workflow for Annotating Eukaryotic Genomes in the Cloud.

Science.gov (United States)

Duvick, Jon; Standage, Daniel S; Merchant, Nirav; Brendel, Volker P

2016-04-01

Genome-wide annotation of gene structure requires the integration of numerous computational steps. Currently, annotation is arguably best accomplished through collaboration of bioinformatics and domain experts, with broad community involvement. However, such a collaborative approach is not scalable at today's pace of sequence generation. To address this problem, we developed the xGDBvm software, which uses an intuitive graphical user interface to access a number of common genome analysis and gene structure tools, preconfigured in a self-contained virtual machine image. Once their virtual machine instance is deployed through iPlant's Atmosphere cloud services, users access the xGDBvm workflow via a unified Web interface to manage inputs, set program parameters, configure links to high-performance computing (HPC) resources, view and manage output, apply analysis and editing tools, or access contextual help. The xGDBvm workflow will mask the genome, compute spliced alignments from transcript and/or protein inputs (locally or on a remote HPC cluster), predict gene structures and gene structure quality, and display output in a public or private genome browser complete with accessory tools. Problematic gene predictions are flagged and can be reannotated using the integrated yrGATE annotation tool. xGDBvm can also be configured to append or replace existing data or load precomputed data. Multiple genomes can be annotated and displayed, and outputs can be archived for sharing or backup. xGDBvm can be adapted to a variety of use cases including de novo genome annotation, reannotation, comparison of different annotations, and training or teaching. © 2016 American Society of Plant Biologists. All rights reserved.

From the desktop to the grid: scalable bioinformatics via workflow conversion.

Science.gov (United States)

de la Garza, Luis; Veit, Johannes; Szolek, Andras; Röttig, Marc; Aiche, Stephan; Gesing, Sandra; Reinert, Knut; Kohlbacher, Oliver

2016-03-12

Reproducibility is one of the tenets of the scientific method. Scientific experiments often comprise complex data flows, selection of adequate parameters, and analysis and visualization of intermediate and end results. Breaking down the complexity of such experiments into the joint collaboration of small, repeatable, well defined tasks, each with well defined inputs, parameters, and outputs, offers the immediate benefit of identifying bottlenecks, pinpoint sections which could benefit from parallelization, among others. Workflows rest upon the notion of splitting complex work into the joint effort of several manageable tasks. There are several engines that give users the ability to design and execute workflows. Each engine was created to address certain problems of a specific community, therefore each one has its advantages and shortcomings. Furthermore, not all features of all workflow engines are royalty-free -an aspect that could potentially drive away members of the scientific community. We have developed a set of tools that enables the scientific community to benefit from workflow interoperability. We developed a platform-free structured representation of parameters, inputs, outputs of command-line tools in so-called Common Tool Descriptor documents. We have also overcome the shortcomings and combined the features of two royalty-free workflow engines with a substantial user community: the Konstanz Information Miner, an engine which we see as a formidable workflow editor, and the Grid and User Support Environment, a web-based framework able to interact with several high-performance computing resources. We have thus created a free and highly accessible way to design workflows on a desktop computer and execute them on high-performance computing resources. Our work will not only reduce time spent on designing scientific workflows, but also make executing workflows on remote high-performance computing resources more accessible to technically inexperienced users. We

Responsive web design workflow

OpenAIRE

LAAK, TIMO

2013-01-01

Responsive Web Design Workflow is a literature review about Responsive Web Design, a web standards based modern web design paradigm. The goals of this research were to define what responsive web design is, determine its importance in building modern websites and describe a workflow for responsive web design projects. Responsive web design is a paradigm to create adaptive websites, which respond to the properties of the media that is used to render them. The three key elements of responsi...

Pro WF Windows Workflow in NET 40

CERN Document Server

Bukovics, Bruce

2010-01-01

Windows Workflow Foundation (WF) is a revolutionary part of the .NET 4 Framework that allows you to orchestrate human and system interactions as a series of workflows that can be easily mapped, analyzed, adjusted, and implemented. As business problems become more complex, the need for workflow-based solutions has never been more evident. WF provides a simple and consistent way to model and implement complex problems. As a developer, you focus on developing the business logic for individual workflow tasks. The runtime handles the execution of those tasks after they have been composed into a wor

Patient-centered care requires a patient-oriented workflow model.

Science.gov (United States)

Ozkaynak, Mustafa; Brennan, Patricia Flatley; Hanauer, David A; Johnson, Sharon; Aarts, Jos; Zheng, Kai; Haque, Saira N

2013-06-01

Effective design of health information technology (HIT) for patient-centered care requires consideration of workflow from the patient's perspective, termed 'patient-oriented workflow.' This approach organizes the building blocks of work around the patients who are moving through the care system. Patient-oriented workflow complements the more familiar clinician-oriented workflow approaches, and offers several advantages, including the ability to capture simultaneous, cooperative work, which is essential in care delivery. Patient-oriented workflow models can also provide an understanding of healthcare work taking place in various formal and informal health settings in an integrated manner. We present two cases demonstrating the potential value of patient-oriented workflow models. Significant theoretical, methodological, and practical challenges must be met to ensure adoption of patient-oriented workflow models. Patient-oriented workflow models define meaningful system boundaries and can lead to HIT implementations that are more consistent with cooperative work and its emergent features.

Integration Of Externalized Decision Models In The Definition Of Workflows For Digital Pathology

Directory of Open Access Journals (Sweden)

J. van Leeuwen

2016-06-01

We proposed a workflow solution enabling the representation of decision models as externalized executable tasks in the process definition. Our approach separates the task implementations from the workflow model, ensuring scalability and allowing for the inclusion of complex decision logic in the workflow execution. In we depict a simplified model of a pathology diagnosis workflow (starting with the digitization of the slides, represented according to the BPMN modeling conventions. The example shows a workflow sequence that automatically orders a HER2 FISH when IHC is borderline according to defined customizable thresholds. The process model integrates an image analysis algorithm that scores images. Based on the score and the thresholds the decision model evaluates the condition and recommends the pre-ordering of an additional test when the score falls between the two thresholds. This leads to faster diagnosis and allows balancing the costs of an additional test versus the overhead of the pathologist by choosing the values of the thresholds.  

Addressing informatics challenges in Translational Research with workflow technology.

Science.gov (United States)

Beaulah, Simon A; Correll, Mick A; Munro, Robin E J; Sheldon, Jonathan G

2008-09-01

Interest in Translational Research has been growing rapidly in recent years. In this collision of different data, technologies and cultures lie tremendous opportunities for the advancement of science and business for organisations that are able to integrate, analyse and deliver this information effectively to users. Workflow-based integration and analysis systems are becoming recognised as a fast and flexible way to build applications that are tailored to scientific areas, yet are built on a common platform. Workflow systems are allowing organisations to meet the key informatics challenges in Translational Research and improve disease understanding and patient care.

Using Mobile Agents to Implement Workflow System

Institute of Scientific and Technical Information of China (English)

LI Jie; LIU Xian-xing; GUO Zheng-wei

2004-01-01

Current workflow management systems usually adopt the existing technologies such as TCP/IP-based Web technologies and CORBA as well to fulfill the bottom communications.Very often it has been considered only from a theoretical point of view, mainly for the lack of concrete possibilities to execute with elasticity.MAT (Mobile Agent Technology) represents a very attractive approach to the distributed control of computer networks and a valid alternative to the implementation of strategies for workflow system.This paper mainly focuses on improving the performance of workflow system by using MAT.Firstly, the performances of workflow systems based on both CORBA and mobile agent are summarized and analyzed; Secondly, the performance contrast is presented by introducing the mathematic model of each kind of data interaction process respectively.Last, a mobile agent-based workflow system named MAWMS is presented and described in detail.

ADVANCED APPROACH TO PRODUCTION WORKFLOW COMPOSITION ON ENGINEERING KNOWLEDGE PORTALS

OpenAIRE

Novogrudska, Rina; Kot, Tatyana; Globa, Larisa; Schill, Alexander

2016-01-01

Background. In the environment of engineering knowledge portals great amount of partial workflows is concentrated. Such workflows are composed into general workflow aiming to perform real complex production task. Characteristics of partial workflows and general workflow structure are not studied enough, that affects the impossibility of general production workflowdynamic composition.Objective. Creating an approach to the general production workflow dynamic composition based on the partial wor...

Analysis of Academic Attitudes and Existing Processes to Inform the Design of Teaching and Learning Material Repositories: A User-Centred Approach

Science.gov (United States)

King, Melanie; Loddington, Steve; Manuel, Sue; Oppenheim, Charles

2008-01-01

The last couple of years have brought a rise in the number of institutional repositories throughout the world and within UK Higher Education institutions, with the majority of these repositories being devoted to research output. Repositories containing teaching and learning material are less common and the workflows and business processes…

A Workflow-Oriented Approach To Propagation Models In Heliophysics

Directory of Open Access Journals (Sweden)

Gabriele Pierantoni

2014-01-01

Full Text Available The Sun is responsible for the eruption of billions of tons of plasma andthe generation of near light-speed particles that propagate throughout the solarsystem and beyond. If directed towards Earth, these events can be damaging toour tecnological infrastructure. Hence there is an effort to understand the causeof the eruptive events and how they propagate from Sun to Earth. However, thephysics governing their propagation is not well understood, so there is a need todevelop a theoretical description of their propagation, known as a PropagationModel, in order to predict when they may impact Earth. It is often difficultto define a single propagation model that correctly describes the physics ofsolar eruptive events, and even more difficult to implement models capable ofcatering for all these complexities and to validate them using real observational data.In this paper, we envisage that workflows offer both a theoretical andpractical framerwork for a novel approach to propagation models. We definea mathematical framework that aims at encompassing the different modalitieswith which workflows can be used, and provide a set of generic building blockswritten in the TAVERNA workflow language that users can use to build theirown propagation models. Finally we test both the theoretical model and thecomposite building blocks of the workflow with a real Science Use Case that wasdiscussed during the 4th CDAW (Coordinated Data Analysis Workshop eventheld by the HELIO project. We show that generic workflow building blocks canbe used to construct a propagation model that succesfully describes the transitof solar eruptive events toward Earth and predict a correct Earth-impact time

Application of case analysis teaching method in nursing teaching in Department of Internal Medicine

Directory of Open Access Journals (Sweden)

Zhang-xiu SHENG

2014-04-01

Full Text Available Objective:In order to adapt to the modern occupation education teaching idea, to stimulate students’ interest in learning, training students' comprehensive quality, improve the students' active participation, understanding, analysis and problem solving skills. Methods: I In the course of different stages using teaching methods of case analysis: case introduction before class teaching method, case analysis during and after class teaching method, and case analysis of the whole chapter after class teaching method.  Results and Conclusion: Through the course of different stages of using case analysis teaching method, we can launch the students’ active learning, stimulate the students' interest in learning, activate classroom atmosphere, train students' independent thinking, strengthen the problems solving ability, improve the self-learning ability of students, activate their participation and awareness, analysis, judgment, introduction, and strengthen students' exam ability, improve the test scores of students and the teaching effect of nursing in Department of internal medicine.

Wildfire: distributed, Grid-enabled workflow construction and execution

Directory of Open Access Journals (Sweden)

Issac Praveen

2005-03-01

Full Text Available Abstract Background We observe two trends in bioinformatics: (i analyses are increasing in complexity, often requiring several applications to be run as a workflow; and (ii multiple CPU clusters and Grids are available to more scientists. The traditional solution to the problem of running workflows across multiple CPUs required programming, often in a scripting language such as perl. Programming places such solutions beyond the reach of many bioinformatics consumers. Results We present Wildfire, a graphical user interface for constructing and running workflows. Wildfire borrows user interface features from Jemboss and adds a drag-and-drop interface allowing the user to compose EMBOSS (and other programs into workflows. For execution, Wildfire uses GEL, the underlying workflow execution engine, which can exploit available parallelism on multiple CPU machines including Beowulf-class clusters and Grids. Conclusion Wildfire simplifies the tasks of constructing and executing bioinformatics workflows.

Database Support for Workflow Management: The WIDE Project

NARCIS (Netherlands)

Grefen, P.W.P.J.; Pernici, B; Sánchez, G.; Unknown, [Unknown

1999-01-01

Database Support for Workflow Management: The WIDE Project presents the results of the ESPRIT WIDE project on advanced database support for workflow management. The book discusses the state of the art in combining database management and workflow management technology, especially in the areas of

Thermal Remote Sensing with Uav-Based Workflows

Science.gov (United States)

Boesch, R.

2017-08-01

Climate change will have a significant influence on vegetation health and growth. Predictions of higher mean summer temperatures and prolonged summer draughts may pose a threat to agriculture areas and forest canopies. Rising canopy temperatures can be an indicator of plant stress because of the closure of stomata and a decrease in the transpiration rate. Thermal cameras are available for decades, but still often used for single image analysis, only in oblique view manner or with visual evaluations of video sequences. Therefore remote sensing using a thermal camera can be an important data source to understand transpiration processes. Photogrammetric workflows allow to process thermal images similar to RGB data. But low spatial resolution of thermal cameras, significant optical distortion and typically low contrast require an adapted workflow. Temperature distribution in forest canopies is typically completely unknown and less distinct than for urban or industrial areas, where metal constructions and surfaces yield high contrast and sharp edge information. The aim of this paper is to investigate the influence of interior camera orientation, tie point matching and ground control points on the resulting accuracy of bundle adjustment and dense cloud generation with a typically used photogrammetric workflow for UAVbased thermal imagery in natural environments.

Contracts for Cross-Organizational Workflow Management

NARCIS (Netherlands)

Koetsier, M.J.; Grefen, P.W.P.J.; Vonk, J.

1999-01-01

Nowadays, many organizations form dynamic partnerships to deal effectively with market requirements. As companies use automated workflow systems to control their processes, a way of linking workflow processes in different organizations is useful in turning the co-operating companies into a seamless

Workflow Patterns for Business Process Modeling

NARCIS (Netherlands)

Thom, Lucineia Heloisa; Lochpe, Cirano; Reichert, M.U.

For its reuse advantages, workflow patterns (e.g., control flow patterns, data patterns, resource patterns) are increasingly attracting the interest of both researchers and vendors. Frequently, business process or workflow models can be assembeled out of a set of recurrent process fragments (or

Challenges in the Setup of Large-scale Next-Generation Sequencing Analysis Workflows

Directory of Open Access Journals (Sweden)

Pranav Kulkarni

Full Text Available While Next-Generation Sequencing (NGS can now be considered an established analysis technology for research applications across the life sciences, the analysis workflows still require substantial bioinformatics expertise. Typical challenges include the appropriate selection of analytical software tools, the speedup of the overall procedure using HPC parallelization and acceleration technology, the development of automation strategies, data storage solutions and finally the development of methods for full exploitation of the analysis results across multiple experimental conditions. Recently, NGS has begun to expand into clinical environments, where it facilitates diagnostics enabling personalized therapeutic approaches, but is also accompanied by new technological, legal and ethical challenges. There are probably as many overall concepts for the analysis of the data as there are academic research institutions. Among these concepts are, for instance, complex IT architectures developed in-house, ready-to-use technologies installed on-site as well as comprehensive Everything as a Service (XaaS solutions. In this mini-review, we summarize the key points to consider in the setup of the analysis architectures, mostly for scientific rather than diagnostic purposes, and provide an overview of the current state of the art and challenges of the field.

Implementing Workflow Reconfiguration in WS-BPEL

DEFF Research Database (Denmark)

Mazzara, Manuel; Dragoni, Nicola; Zhou, Mu

2012-01-01

This paper investigates the problem of dynamic reconfiguration by means of a workflow-based case study used for discussion. We state the requirements on a system implementing the workflow and its reconfiguration, and we describe the system’s design in BPMN. WS-BPEL, a language that would not natu......This paper investigates the problem of dynamic reconfiguration by means of a workflow-based case study used for discussion. We state the requirements on a system implementing the workflow and its reconfiguration, and we describe the system’s design in BPMN. WS-BPEL, a language that would...... not naturally support dynamic change, is used as a target for implementation. The WS-BPEL recovery framework is here exploited to implement the reconfiguration using principles derived from previous research in process algebra and two mappings from BPMN to WS-BPEL are presented, one automatic and only mostly...

xGDBvm: A Web GUI-Driven Workflow for Annotating Eukaryotic Genomes in the Cloud[OPEN

Science.gov (United States)

Merchant, Nirav

2016-01-01

Genome-wide annotation of gene structure requires the integration of numerous computational steps. Currently, annotation is arguably best accomplished through collaboration of bioinformatics and domain experts, with broad community involvement. However, such a collaborative approach is not scalable at today’s pace of sequence generation. To address this problem, we developed the xGDBvm software, which uses an intuitive graphical user interface to access a number of common genome analysis and gene structure tools, preconfigured in a self-contained virtual machine image. Once their virtual machine instance is deployed through iPlant’s Atmosphere cloud services, users access the xGDBvm workflow via a unified Web interface to manage inputs, set program parameters, configure links to high-performance computing (HPC) resources, view and manage output, apply analysis and editing tools, or access contextual help. The xGDBvm workflow will mask the genome, compute spliced alignments from transcript and/or protein inputs (locally or on a remote HPC cluster), predict gene structures and gene structure quality, and display output in a public or private genome browser complete with accessory tools. Problematic gene predictions are flagged and can be reannotated using the integrated yrGATE annotation tool. xGDBvm can also be configured to append or replace existing data or load precomputed data. Multiple genomes can be annotated and displayed, and outputs can be archived for sharing or backup. xGDBvm can be adapted to a variety of use cases including de novo genome annotation, reannotation, comparison of different annotations, and training or teaching. PMID:27020957

Evaluation of Workflow Management Systems - A Meta Model Approach

Directory of Open Access Journals (Sweden)

Michael Rosemann

1998-11-01

Full Text Available The automated enactment of processes through the use of workflow management systems enables the outsourcing of the control flow from application systems. By now a large number of systems, that follow different workflow paradigms, are available. This leads to the problem of selecting the appropriate workflow management system for a given situation. In this paper we outline the benefits of a meta model approach for the evaluation and comparison of different workflow management systems. After a general introduction on the topic of meta modeling the meta models of the workflow management systems WorkParty (Siemens Nixdorf and FlowMark (IBM are compared as an example. These product specific meta models can be generalized to meta reference models, which helps to specify a workflow methodology. Exemplary, an organisational reference meta model is presented, which helps users in specifying their requirements for a workflow management system.

Supporting the processes of teaching and learning

DEFF Research Database (Denmark)

Bundsgaard, Jeppe

2010-01-01

an equally widespread process at the meso-level is a workflow called Lecture-Recitation-Seatwork-Plenary session (abbreviated as LeReSeP). These two structures are discussed and analysed, and they are criticised on a theoretical basis for being too teacher-centred, and leaving insufficient room....... A course consists of several modules integrating several workflows, each of which comprises several interaction sequences. Two common processes are identified. At the micro-level, the most common interaction sequence is (the teacher's) Initiation- (student's) Response- (teacher's) Feedback (IRF) while...... for developing more complex competences in students. A number of alternative interaction sequences and workflows are described and discussed. These alternatives all have their advantages, but they are evaluated as more complex, troublesome, and inconvenient to work with. Teaching and learning materials support...

Omics Informatics: From Scattered Individual Software Tools to Integrated Workflow Management Systems.

Science.gov (United States)

Ma, Tianle; Zhang, Aidong

2017-01-01

Omic data analyses pose great informatics challenges. As an emerging subfield of bioinformatics, omics informatics focuses on analyzing multi-omic data efficiently and effectively, and is gaining momentum. There are two underlying trends in the expansion of omics informatics landscape: the explosion of scattered individual omics informatics tools with each of which focuses on a specific task in both single- and multi- omic settings, and the fast-evolving integrated software platforms such as workflow management systems that can assemble multiple tools into pipelines and streamline integrative analysis for complicated tasks. In this survey, we give a holistic view of omics informatics, from scattered individual informatics tools to integrated workflow management systems. We not only outline the landscape and challenges of omics informatics, but also sample a number of widely used and cutting-edge algorithms in omics data analysis to give readers a fine-grained view. We survey various workflow management systems (WMSs), classify them into three levels of WMSs from simple software toolkits to integrated multi-omic analytical platforms, and point out the emerging needs for developing intelligent workflow management systems. We also discuss the challenges, strategies and some existing work in systematic evaluation of omics informatics tools. We conclude by providing future perspectives of emerging fields and new frontiers in omics informatics.

CMS data and workflow management system

CERN Document Server

Fanfani, A; Bacchi, W; Codispoti, G; De Filippis, N; Pompili, A; My, S; Abbrescia, M; Maggi, G; Donvito, G; Silvestris, L; Calzolari, F; Sarkar, S; Spiga, D; Cinquili, M; Lacaprara, S; Biasotto, M; Farina, F; Merlo, M; Belforte, S; Kavka, C; Sala, L; Harvey, J; Hufnagel, D; Fanzago, F; Corvo, M; Magini, N; Rehn, J; Toteva, Z; Feichtinger, D; Tuura, L; Eulisse, G; Bockelman, B; Lundstedt, C; Egeland, R; Evans, D; Mason, D; Gutsche, O; Sexton-Kennedy, L; Dagenhart, D W; Afaq, A; Guo, Y; Kosyakov, S; Lueking, L; Sekhri, V; Fisk, I; McBride, P; Bauerdick, L; Bakken, J; Rossman, P; Wicklund, E; Wu, Y; Jones, C; Kuznetsov, V; Riley, D; Dolgert, A; van Lingen, F; Narsky, I; Paus, C; Klute, M; Gomez-Ceballos, G; Piedra-Gomez, J; Miller, M; Mohapatra, A; Lazaridis, C; Bradley, D; Elmer, P; Wildish, T; Wuerthwein, F; Letts, J; Bourilkov, D; Kim, B; Smith, P; Hernandez, J M; Caballero, J; Delgado, A; Flix, J; Cabrillo-Bartolome, I; Kasemann, M; Flossdorf, A; Stadie, H; Kreuzer, P; Khomitch, A; Hof, C; Zeidler, C; Kalini, S; Trunov, A; Saout, C; Felzmann, U; Metson, S; Newbold, D; Geddes, N; Brew, C; Jackson, J; Wakefield, S; De Weirdt, S; Adler, V; Maes, J; Van Mulders, P; Villella, I; Hammad, G; Pukhaeva, N; Kurca, T; Semneniouk, I; Guan, W; Lajas, J A; Teodoro, D; Gregores, E; Baquero, M; Shehzad, A; Kadastik, M; Kodolova, O; Chao, Y; Ming Kuo, C; Filippidis, C; Walzel, G; Han, D; Kalinowski, A; Giro de Almeida, N M; Panyam, N

2008-01-01

CMS expects to manage many tens of peta bytes of data to be distributed over several computing centers around the world. The CMS distributed computing and analysis model is designed to serve, process and archive the large number of events that will be generated when the CMS detector starts taking data. The underlying concepts and the overall architecture of the CMS data and workflow management system will be presented. In addition the experience in using the system for MC production, initial detector commissioning activities and data analysis will be summarized.

Workflow User Interfaces Patterns

Directory of Open Access Journals (Sweden)

Jean Vanderdonckt

2012-03-01

Full Text Available Este trabajo presenta una colección de patrones de diseño de interfaces de usuario para sistemas de información para el flujo de trabajo; la colección incluye cuarenta y tres patrones clasificados en siete categorías identificados a partir de la lógica del ciclo de vida de la tarea sobre la base de la oferta y la asignación de tareas a los responsables de realizarlas (i. e. recursos humanos durante el flujo de trabajo. Cada patrón de la interfaz de usuario de flujo de trabajo (WUIP, por sus siglas en inglés se caracteriza por las propiedades expresadas en el lenguaje PLML para expresar patrones y complementado por otros atributos y modelos que se adjuntan a dicho modelo: la interfaz de usuario abstracta y el modelo de tareas correspondiente. Estos modelos se especifican en un lenguaje de descripción de interfaces de usuario. Todos los WUIPs se almacenan en una biblioteca y se pueden recuperar a través de un editor de flujo de trabajo que vincula a cada patrón de asignación de trabajo a su WUIP correspondiente.A collection of user interface design patterns for workflow information systems is presented that contains forty three resource patterns classified in seven categories. These categories and their corresponding patterns have been logically identified from the task life cycle based on offering and allocation operations. Each Workflow User Interface Pattern (WUIP is characterized by properties expressed in the PLML markup language for expressing patterns and augmented by additional attributes and models attached to the pattern: the abstract user interface and the corresponding task model. These models are specified in a User Interface Description Language. All WUIPs are stored in a library and can be retrieved within a workflow editor that links each workflow pattern to its corresponding WUIP, thus giving rise to a user interface for each workflow pattern.

Teaching meta-analysis using MetaLight

Directory of Open Access Journals (Sweden)

Thomas James

2012-10-01

Full Text Available Abstract Background Meta-analysis is a statistical method for combining the results of primary studies. It is often used in systematic reviews and is increasingly a method and topic that appears in student dissertations. MetaLight is a freely available software application that runs simple meta-analyses and contains specific functionality to facilitate the teaching and learning of meta-analysis. While there are many courses and resources for meta-analysis available and numerous software applications to run meta-analyses, there are few pieces of software which are aimed specifically at helping those teaching and learning meta-analysis. Valuable teaching time can be spent learning the mechanics of a new software application, rather than on the principles and practices of meta-analysis. Findings We discuss ways in which the MetaLight tool can be used to present some of the main issues involved in undertaking and interpreting a meta-analysis. Conclusions While there are many software tools available for conducting meta-analysis, in the context of a teaching programme such software can require expenditure both in terms of money and in terms of the time it takes to learn how to use it. MetaLight was developed specifically as a tool to facilitate the teaching and learning of meta-analysis and we have presented here some of the ways it might be used in a training situation.

Optimal resource assignment in workflows for maximizing cooperation

NARCIS (Netherlands)

Kumar, Akhil; Dijkman, R.M.; Song, Minseok; Daniel, Fl.; Wang, J.; Weber, B.

2013-01-01

A workflow is a team process since many actors work on various tasks to complete an instance. Resource management in such workflows deals with assignment of tasks to workers or actors. In team formation, it is necessary to ensure that members of a team are compatible with each other. When a workflow

Performing Workflows in Pervasive Environments Based on Context Specifications

OpenAIRE

Xiping Liu; Jianxin Chen

2010-01-01

The workflow performance consists of the performance of activities and transitions between activities. Along with the fast development of varied computing devices, activities in workflows and transitions between activities could be performed in pervasive ways, whichcauses that the workflow performance need to migrate from traditional computing environments to pervasive environments. To perform workflows in pervasive environments needs to take account of the context information which affects b...

Verifying generalized soundness for workflow nets

NARCIS (Netherlands)

Hee, van K.M.; Oanea, O.I.; Sidorova, N.; Voorhoeve, M.; Virbitskaite, I.; Voronkov, A.

2007-01-01

We improve the decision procedure from [10] for the problem of generalized soundness of workflow nets. A workflow net is generalized sound iff every marking reachable from an initial marking with k tokens on the initial place terminates properly, i.e. it can reach a marking with k tokens on the

Worklist handling in workflow-enabled radiological application systems

Science.gov (United States)

Wendler, Thomas; Meetz, Kirsten; Schmidt, Joachim; von Berg, Jens

2000-05-01

For the next generation integrated information systems for health care applications, more emphasis has to be put on systems which, by design, support the reduction of cost, the increase inefficiency and the improvement of the quality of services. A substantial contribution to this will be the modeling. optimization, automation and enactment of processes in health care institutions. One of the perceived key success factors for the system integration of processes will be the application of workflow management, with workflow management systems as key technology components. In this paper we address workflow management in radiology. We focus on an important aspect of workflow management, the generation and handling of worklists, which provide workflow participants automatically with work items that reflect tasks to be performed. The display of worklists and the functions associated with work items are the visible part for the end-users of an information system using a workflow management approach. Appropriate worklist design and implementation will influence user friendliness of a system and will largely influence work efficiency. Technically, in current imaging department information system environments (modality-PACS-RIS installations), a data-driven approach has been taken: Worklist -- if present at all -- are generated from filtered views on application data bases. In a future workflow-based approach, worklists will be generated by autonomous workflow services based on explicit process models and organizational models. This process-oriented approach will provide us with an integral view of entire health care processes or sub- processes. The paper describes the basic mechanisms of this approach and summarizes its benefits.

A virtual radiation therapy workflow training simulation

International Nuclear Information System (INIS)

Bridge, P.; Crowe, S.B.; Gibson, G.; Ellemor, N.J.; Hargrave, C.; Carmichael, M.

2016-01-01

Aim: Simulation forms an increasingly vital component of clinical skills development in a wide range of professional disciplines. Simulation of clinical techniques and equipment is designed to better prepare students for placement by providing an opportunity to learn technical skills in a “safe” academic environment. In radiotherapy training over the last decade or so this has predominantly comprised treatment planning software and small ancillary equipment such as mould room apparatus. Recent virtual reality developments have dramatically changed this approach. Innovative new simulation applications and file processing and interrogation software have helped to fill in the gaps to provide a streamlined virtual workflow solution. This paper outlines the innovations that have enabled this, along with an evaluation of the impact on students and educators. Method: Virtual reality software and workflow applications have been developed to enable the following steps of radiation therapy to be simulated in an academic environment: CT scanning using a 3D virtual CT scanner simulation; batch CT duplication; treatment planning; 3D plan evaluation using a virtual linear accelerator; quantitative plan assessment, patient setup with lasers; and image guided radiotherapy software. Results: Evaluation of the impact of the virtual reality workflow system highlighted substantial time saving for academic staff as well as positive feedback from students relating to preparation for clinical placements. Students valued practice in the “safe” environment and the opportunity to understand the clinical workflow ahead of clinical department experience. Conclusion: Simulation of most of the radiation therapy workflow and tasks is feasible using a raft of virtual reality simulation applications and supporting software. Benefits of this approach include time-saving, embedding of a case-study based approach, increased student confidence, and optimal use of the clinical environment

Automatic Image Processing Workflow for the Keck/NIRC2 Vortex Coronagraph

Science.gov (United States)

Xuan, Wenhao; Cook, Therese; Ngo, Henry; Zawol, Zoe; Ruane, Garreth; Mawet, Dimitri

2018-01-01

The Keck/NIRC2 camera, equipped with the vortex coronagraph, is an instrument targeted at the high contrast imaging of extrasolar planets. To uncover a faint planet signal from the overwhelming starlight, we utilize the Vortex Image Processing (VIP) library, which carries out principal component analysis to model and remove the stellar point spread function. To bridge the gap between data acquisition and data reduction, we implement a workflow that 1) downloads, sorts, and processes data with VIP, 2) stores the analysis products into a database, and 3) displays the reduced images, contrast curves, and auxiliary information on a web interface. Both angular differential imaging and reference star differential imaging are implemented in the analysis module. A real-time version of the workflow runs during observations, allowing observers to make educated decisions about time distribution on different targets, hence optimizing science yield. The post-night version performs a standardized reduction after the observation, building up a valuable database that not only helps uncover new discoveries, but also enables a statistical study of the instrument itself. We present the workflow, and an examination of the contrast performance of the NIRC2 vortex with respect to factors including target star properties and observing conditions.

Similarity measures for scientific workflows

OpenAIRE

Starlinger, Johannes

2016-01-01

In Laufe der letzten zehn Jahre haben Scientific Workflows als Werkzeug zur Erstellung von reproduzierbaren, datenverarbeitenden in-silico Experimenten an Aufmerksamkeit gewonnen, in die sowohl lokale Skripte und Anwendungen, als auch Web-Services eingebunden werden können. Über spezialisierte Online-Bibliotheken, sogenannte Repositories, können solche Workflows veröffentlicht und wiederverwendet werden. Mit zunehmender Größe dieser Repositories werden Ähnlichkeitsmaße für Scientific Workfl...

a Workflow for UAV's Integration Into a Geodesign Platform

Science.gov (United States)

Anca, P.; Calugaru, A.; Alixandroae, I.; Nazarie, R.

2016-06-01

This paper presents a workflow for the development of various Geodesign scenarios. The subject is important in the context of identifying patterns and designing solutions for a Smart City with optimized public transportation, efficient buildings, efficient utilities, recreational facilities a.s.o.. The workflow describes the procedures starting with acquiring data in the field, data processing, orthophoto generation, DTM generation, integration into a GIS platform and analyzing for a better support for Geodesign. Esri's City Engine is used mostly for 3D modeling capabilities that enable the user to obtain 3D realistic models. The workflow uses as inputs information extracted from images acquired using UAVs technologies, namely eBee, existing 2D GIS geodatabases, and a set of CGA rules. The method that we used further, is called procedural modeling, and uses rules in order to extrude buildings, the street network, parcel zoning and side details, based on the initial attributes from the geodatabase. The resulted products are various scenarios for redesigning, for analyzing new exploitation sites. Finally, these scenarios can be published as interactive web scenes for internal, groups or pubic consultation. In this way, problems like the impact of new constructions being build, re-arranging green spaces or changing routes for public transportation, etc. are revealed through impact and visibility analysis or shadowing analysis and are brought to the citizen's attention. This leads to better decisions.

geoKepler Workflow Module for Computationally Scalable and Reproducible Geoprocessing and Modeling

Science.gov (United States)

Cowart, C.; Block, J.; Crawl, D.; Graham, J.; Gupta, A.; Nguyen, M.; de Callafon, R.; Smarr, L.; Altintas, I.

2015-12-01

The NSF-funded WIFIRE project has developed an open-source, online geospatial workflow platform for unifying geoprocessing tools and models for for fire and other geospatially dependent modeling applications. It is a product of WIFIRE's objective to build an end-to-end cyberinfrastructure for real-time and data-driven simulation, prediction and visualization of wildfire behavior. geoKepler includes a set of reusable GIS components, or actors, for the Kepler Scientific Workflow System (https://kepler-project.org). Actors exist for reading and writing GIS data in formats such as Shapefile, GeoJSON, KML, and using OGC web services such as WFS. The actors also allow for calling geoprocessing tools in other packages such as GDAL and GRASS. Kepler integrates functions from multiple platforms and file formats into one framework, thus enabling optimal GIS interoperability, model coupling, and scalability. Products of the GIS actors can be fed directly to models such as FARSITE and WRF. Kepler's ability to schedule and scale processes using Hadoop and Spark also makes geoprocessing ultimately extensible and computationally scalable. The reusable workflows in geoKepler can be made to run automatically when alerted by real-time environmental conditions. Here, we show breakthroughs in the speed of creating complex data for hazard assessments with this platform. We also demonstrate geoKepler workflows that use Data Assimilation to ingest real-time weather data into wildfire simulations, and for data mining techniques to gain insight into environmental conditions affecting fire behavior. Existing machine learning tools and libraries such as R and MLlib are being leveraged for this purpose in Kepler, as well as Kepler's Distributed Data Parallel (DDP) capability to provide a framework for scalable processing. geoKepler workflows can be executed via an iPython notebook as a part of a Jupyter hub at UC San Diego for sharing and reporting of the scientific analysis and results from

A user-friendly workflow for analysis of Illumina gene expression bead array data available at the arrayanalysis.org portal.

Science.gov (United States)

Eijssen, Lars M T; Goelela, Varshna S; Kelder, Thomas; Adriaens, Michiel E; Evelo, Chris T; Radonjic, Marijana

2015-06-30

Illumina whole-genome expression bead arrays are a widely used platform for transcriptomics. Most of the tools available for the analysis of the resulting data are not easily applicable by less experienced users. ArrayAnalysis.org provides researchers with an easy-to-use and comprehensive interface to the functionality of R and Bioconductor packages for microarray data analysis. As a modular open source project, it allows developers to contribute modules that provide support for additional types of data or extend workflows. To enable data analysis of Illumina bead arrays for a broad user community, we have developed a module for ArrayAnalysis.org that provides a free and user-friendly web interface for quality control and pre-processing for these arrays. This module can be used together with existing modules for statistical and pathway analysis to provide a full workflow for Illumina gene expression data analysis. The module accepts data exported from Illumina's GenomeStudio, and provides the user with quality control plots and normalized data. The outputs are directly linked to the existing statistics module of ArrayAnalysis.org, but can also be downloaded for further downstream analysis in third-party tools. The Illumina bead arrays analysis module is available at http://www.arrayanalysis.org . A user guide, a tutorial demonstrating the analysis of an example dataset, and R scripts are available. The module can be used as a starting point for statistical evaluation and pathway analysis provided on the website or to generate processed input data for a broad range of applications in life sciences research.

A Network Inference Workflow Applied to Virulence-Related Processes in Salmonella typhimurium

Energy Technology Data Exchange (ETDEWEB)

Taylor, Ronald C.; Singhal, Mudita; Weller, Jennifer B.; Khoshnevis, Saeed; Shi, Liang; McDermott, Jason E.

2009-04-20

Inference of the structure of mRNA transcriptional regulatory networks, protein regulatory or interaction networks, and protein activation/inactivation-based signal transduction networks are critical tasks in systems biology. In this article we discuss a workflow for the reconstruction of parts of the transcriptional regulatory network of the pathogenic bacterium Salmonella typhimurium based on the information contained in sets of microarray gene expression data now available for that organism, and describe our results obtained by following this workflow. The primary tool is one of the network inference algorithms deployed in the Software Environment for BIological Network Inference (SEBINI). Specifically, we selected the algorithm called Context Likelihood of Relatedness (CLR), which uses the mutual information contained in the gene expression data to infer regulatory connections. The associated analysis pipeline automatically stores the inferred edges from the CLR runs within SEBINI and, upon request, transfers the inferred edges into either Cytoscape or the plug-in Collective Analysis of Biological of Biological Interaction Networks (CABIN) tool for further post-analysis of the inferred regulatory edges. The following article presents the outcome of this workflow, as well as the protocols followed for microarray data collection, data cleansing, and network inference. Our analysis revealed several interesting interactions, functional groups, metabolic pathways, and regulons in S. typhimurium.

Analysis of application for situational teaching method in tourism English teaching

Directory of Open Access Journals (Sweden)

Li Jing

2016-01-01

Full Text Available Faced with China’s English teaching problems today, it is not enough to just know that the situational teaching method can be effectively applied in a wide range of English teaching, but there is a must to embody the specific application value of the situational teaching method. This paper first analyzes tourism English teaching in China through establishing the quantifiable group-index hierarchical structure model to obtain the optimal training program of China’s tourism English talents, and then carries out a detailed analysis of the application and role of the situational teaching method in training of the tourism English ability to obtain the specific application scope and application value of the situational teaching method in the tourism English teaching.

Deriving DICOM surgical extensions from surgical workflows

Science.gov (United States)

Burgert, O.; Neumuth, T.; Gessat, M.; Jacobs, S.; Lemke, H. U.

2007-03-01

The generation, storage, transfer, and representation of image data in radiology are standardized by DICOM. To cover the needs of image guided surgery or computer assisted surgery in general one needs to handle patient information besides image data. A large number of objects must be defined in DICOM to address the needs of surgery. We propose an analysis process based on Surgical Workflows that helps to identify these objects together with use cases and requirements motivating for their specification. As the first result we confirmed the need for the specification of representation and transfer of geometric models. The analysis of Surgical Workflows has shown that geometric models are widely used to represent planned procedure steps, surgical tools, anatomical structures, or prosthesis in the context of surgical planning, image guided surgery, augmented reality, and simulation. By now, the models are stored and transferred in several file formats bare of contextual information. The standardization of data types including contextual information and specifications for handling of geometric models allows a broader usage of such models. This paper explains the specification process leading to Geometry Mesh Service Object Pair classes. This process can be a template for the definition of further DICOM classes.

Text mining for the biocuration workflow

Science.gov (United States)

Hirschman, Lynette; Burns, Gully A. P. C; Krallinger, Martin; Arighi, Cecilia; Cohen, K. Bretonnel; Valencia, Alfonso; Wu, Cathy H.; Chatr-Aryamontri, Andrew; Dowell, Karen G.; Huala, Eva; Lourenço, Anália; Nash, Robert; Veuthey, Anne-Lise; Wiegers, Thomas; Winter, Andrew G.

2012-01-01

Molecular biology has become heavily dependent on biological knowledge encoded in expert curated biological databases. As the volume of biological literature increases, biocurators need help in keeping up with the literature; (semi-) automated aids for biocuration would seem to be an ideal application for natural language processing and text mining. However, to date, there have been few documented successes for improving biocuration throughput using text mining. Our initial investigations took place for the workshop on ‘Text Mining for the BioCuration Workflow’ at the third International Biocuration Conference (Berlin, 2009). We interviewed biocurators to obtain workflows from eight biological databases. This initial study revealed high-level commonalities, including (i) selection of documents for curation; (ii) indexing of documents with biologically relevant entities (e.g. genes); and (iii) detailed curation of specific relations (e.g. interactions); however, the detailed workflows also showed many variabilities. Following the workshop, we conducted a survey of biocurators. The survey identified biocurator priorities, including the handling of full text indexed with biological entities and support for the identification and prioritization of documents for curation. It also indicated that two-thirds of the biocuration teams had experimented with text mining and almost half were using text mining at that time. Analysis of our interviews and survey provide a set of requirements for the integration of text mining into the biocuration workflow. These can guide the identification of common needs across curated databases and encourage joint experimentation involving biocurators, text mining developers and the larger biomedical research community. PMID:22513129

An integrated workflow for robust alignment and simplified quantitative analysis of NMR spectrometry data

Directory of Open Access Journals (Sweden)

Dommisse Roger

2011-10-01

Full Text Available Abstract Background Nuclear magnetic resonance spectroscopy (NMR is a powerful technique to reveal and compare quantitative metabolic profiles of biological tissues. However, chemical and physical sample variations make the analysis of the data challenging, and typically require the application of a number of preprocessing steps prior to data interpretation. For example, noise reduction, normalization, baseline correction, peak picking, spectrum alignment and statistical analysis are indispensable components in any NMR analysis pipeline. Results We introduce a novel suite of informatics tools for the quantitative analysis of NMR metabolomic profile data. The core of the processing cascade is a novel peak alignment algorithm, called hierarchical Cluster-based Peak Alignment (CluPA. The algorithm aligns a target spectrum to the reference spectrum in a top-down fashion by building a hierarchical cluster tree from peak lists of reference and target spectra and then dividing the spectra into smaller segments based on the most distant clusters of the tree. To reduce the computational time to estimate the spectral misalignment, the method makes use of Fast Fourier Transformation (FFT cross-correlation. Since the method returns a high-quality alignment, we can propose a simple methodology to study the variability of the NMR spectra. For each aligned NMR data point the ratio of the between-group and within-group sum of squares (BW-ratio is calculated to quantify the difference in variability between and within predefined groups of NMR spectra. This differential analysis is related to the calculation of the F-statistic or a one-way ANOVA, but without distributional assumptions. Statistical inference based on the BW-ratio is achieved by bootstrapping the null distribution from the experimental data. Conclusions The workflow performance was evaluated using a previously published dataset. Correlation maps, spectral and grey scale plots show clear

An integrated workflow for robust alignment and simplified quantitative analysis of NMR spectrometry data.

Science.gov (United States)

Vu, Trung N; Valkenborg, Dirk; Smets, Koen; Verwaest, Kim A; Dommisse, Roger; Lemière, Filip; Verschoren, Alain; Goethals, Bart; Laukens, Kris

2011-10-20

Nuclear magnetic resonance spectroscopy (NMR) is a powerful technique to reveal and compare quantitative metabolic profiles of biological tissues. However, chemical and physical sample variations make the analysis of the data challenging, and typically require the application of a number of preprocessing steps prior to data interpretation. For example, noise reduction, normalization, baseline correction, peak picking, spectrum alignment and statistical analysis are indispensable components in any NMR analysis pipeline. We introduce a novel suite of informatics tools for the quantitative analysis of NMR metabolomic profile data. The core of the processing cascade is a novel peak alignment algorithm, called hierarchical Cluster-based Peak Alignment (CluPA). The algorithm aligns a target spectrum to the reference spectrum in a top-down fashion by building a hierarchical cluster tree from peak lists of reference and target spectra and then dividing the spectra into smaller segments based on the most distant clusters of the tree. To reduce the computational time to estimate the spectral misalignment, the method makes use of Fast Fourier Transformation (FFT) cross-correlation. Since the method returns a high-quality alignment, we can propose a simple methodology to study the variability of the NMR spectra. For each aligned NMR data point the ratio of the between-group and within-group sum of squares (BW-ratio) is calculated to quantify the difference in variability between and within predefined groups of NMR spectra. This differential analysis is related to the calculation of the F-statistic or a one-way ANOVA, but without distributional assumptions. Statistical inference based on the BW-ratio is achieved by bootstrapping the null distribution from the experimental data. The workflow performance was evaluated using a previously published dataset. Correlation maps, spectral and grey scale plots show clear improvements in comparison to other methods, and the down

Provenance-based refresh in data-oriented workflows

KAUST Repository

Ikeda, Robert; Salihoglu, Semih; Widom, Jennifer

2011-01-01

We consider a general workflow setting in which input data sets are processed by a graph of transformations to produce output results. Our goal is to perform efficient selective refresh of elements in the output data, i.e., compute the latest values of specific output elements when the input data may have changed. We explore how data provenance can be used to enable efficient refresh. Our approach is based on capturing one-level data provenance at each transformation when the workflow is run initially. Then at refresh time provenance is used to determine (transitively) which input elements are responsible for given output elements, and the workflow is rerun only on that portion of the data needed for refresh. Our contributions are to formalize the problem setting and the problem itself, to specify properties of transformations and provenance that are required for efficient refresh, and to provide algorithms that apply to a wide class of transformations and workflows. We have built a prototype system supporting the features and algorithms presented in the paper. We report preliminary experimental results on the overhead of provenance capture, and on the crossover point between selective refresh and full workflow recomputation. © 2011 ACM.

COSMOS: Python library for massively parallel workflows.

Science.gov (United States)

Gafni, Erik; Luquette, Lovelace J; Lancaster, Alex K; Hawkins, Jared B; Jung, Jae-Yoon; Souilmi, Yassine; Wall, Dennis P; Tonellato, Peter J

2014-10-15

Efficient workflows to shepherd clinically generated genomic data through the multiple stages of a next-generation sequencing pipeline are of critical importance in translational biomedical science. Here we present COSMOS, a Python library for workflow management that allows formal description of pipelines and partitioning of jobs. In addition, it includes a user interface for tracking the progress of jobs, abstraction of the queuing system and fine-grained control over the workflow. Workflows can be created on traditional computing clusters as well as cloud-based services. Source code is available for academic non-commercial research purposes. Links to code and documentation are provided at http://lpm.hms.harvard.edu and http://wall-lab.stanford.edu. dpwall@stanford.edu or peter_tonellato@hms.harvard.edu. Supplementary data are available at Bioinformatics online. © The Author 2014. Published by Oxford University Press.

A Multi-Dimensional Classification Model for Scientific Workflow Characteristics

Energy Technology Data Exchange (ETDEWEB)

Ramakrishnan, Lavanya; Plale, Beth

2010-04-05

Workflows have been used to model repeatable tasks or operations in manufacturing, business process, and software. In recent years, workflows are increasingly used for orchestration of science discovery tasks that use distributed resources and web services environments through resource models such as grid and cloud computing. Workflows have disparate re uirements and constraints that affects how they might be managed in distributed environments. In this paper, we present a multi-dimensional classification model illustrated by workflow examples obtained through a survey of scientists from different domains including bioinformatics and biomedical, weather and ocean modeling, astronomy detailing their data and computational requirements. The survey results and classification model contribute to the high level understandingof scientific workflows.

Automated data reduction workflows for astronomy. The ESO Reflex environment

Science.gov (United States)

Freudling, W.; Romaniello, M.; Bramich, D. M.; Ballester, P.; Forchi, V.; García-Dabló, C. E.; Moehler, S.; Neeser, M. J.

2013-11-01

Context. Data from complex modern astronomical instruments often consist of a large number of different science and calibration files, and their reduction requires a variety of software tools. The execution chain of the tools represents a complex workflow that needs to be tuned and supervised, often by individual researchers that are not necessarily experts for any specific instrument. Aims: The efficiency of data reduction can be improved by using automatic workflows to organise data and execute a sequence of data reduction steps. To realize such efficiency gains, we designed a system that allows intuitive representation, execution and modification of the data reduction workflow, and has facilities for inspection and interaction with the data. Methods: The European Southern Observatory (ESO) has developed Reflex, an environment to automate data reduction workflows. Reflex is implemented as a package of customized components for the Kepler workflow engine. Kepler provides the graphical user interface to create an executable flowchart-like representation of the data reduction process. Key features of Reflex are a rule-based data organiser, infrastructure to re-use results, thorough book-keeping, data progeny tracking, interactive user interfaces, and a novel concept to exploit information created during data organisation for the workflow execution. Results: Automated workflows can greatly increase the efficiency of astronomical data reduction. In Reflex, workflows can be run non-interactively as a first step. Subsequent optimization can then be carried out while transparently re-using all unchanged intermediate products. We found that such workflows enable the reduction of complex data by non-expert users and minimizes mistakes due to book-keeping errors. Conclusions: Reflex includes novel concepts to increase the efficiency of astronomical data processing. While Reflex is a specific implementation of astronomical scientific workflows within the Kepler workflow

WS-VLAM: A GT4 based workflow management system

NARCIS (Netherlands)

Wibisono, A.; Vasyunin, D.; Korkhov, V.; Zhao, Z.; Belloum, A.; de Laat, C.; Adriaans, P.; Hertzberger, B.

2007-01-01

Generic Grid middleware, e.g., Globus Toolkit 4 (GT4), provides basic services for scientific workflow management systems to discover, store and integrate workflow components. Using the state of the art Grid services can advance the functionality of workflow engine in orchestrating distributed Grid

Multi-level meta-workflows: new concept for regularly occurring tasks in quantum chemistry.

Science.gov (United States)

Arshad, Junaid; Hoffmann, Alexander; Gesing, Sandra; Grunzke, Richard; Krüger, Jens; Kiss, Tamas; Herres-Pawlis, Sonja; Terstyanszky, Gabor

2016-01-01

In Quantum Chemistry, many tasks are reoccurring frequently, e.g. geometry optimizations, benchmarking series etc. Here, workflows can help to reduce the time of manual job definition and output extraction. These workflows are executed on computing infrastructures and may require large computing and data resources. Scientific workflows hide these infrastructures and the resources needed to run them. It requires significant efforts and specific expertise to design, implement and test these workflows. Many of these workflows are complex and monolithic entities that can be used for particular scientific experiments. Hence, their modification is not straightforward and it makes almost impossible to share them. To address these issues we propose developing atomic workflows and embedding them in meta-workflows. Atomic workflows deliver a well-defined research domain specific function. Publishing workflows in repositories enables workflow sharing inside and/or among scientific communities. We formally specify atomic and meta-workflows in order to define data structures to be used in repositories for uploading and sharing them. Additionally, we present a formal description focused at orchestration of atomic workflows into meta-workflows. We investigated the operations that represent basic functionalities in Quantum Chemistry, developed the relevant atomic workflows and combined them into meta-workflows. Having these workflows we defined the structure of the Quantum Chemistry workflow library and uploaded these workflows in the SHIWA Workflow Repository.Graphical AbstractMeta-workflows and embedded workflows in the template representation.

Teaching Content Analysis through "Harry Potter"

Science.gov (United States)

Messinger, Adam M.

2012-01-01

Content analysis is a valuable research tool for social scientists that unfortunately can prove challenging to teach to undergraduate students. Published classroom exercises designed to teach content analysis have thus far been predominantly envisioned as lengthy projects for upper-level courses. A brief and engaging exercise may be more…

Resident training in a teaching hospital: How do attendings teach in the real operative environment?

Science.gov (United States)

Glarner, Carly E; Law, Katherine E; Zelenski, Amy B; McDonald, Robert J; Greenberg, Jacob A; Foley, Eugene F; Wiegmann, Douglas A; Greenberg, Caprice C

2017-07-01

The study aim was to explore the nature of intraoperative education and its interaction with the environment where surgical education occurs. Video and audio recording captured teaching interactions between colorectal surgeons and general surgery residents during laparoscopic segmental colectomies. Cases and collected data were analyzed for teaching behaviors and workflow disruptions. Flow disruptions (FDs) are considered deviations from natural case progression. Across 10 cases (20.4 operative hours), attendings spent 11.2 hours (54.7%) teaching, using directing (M = 250.1), and confirming (M = 236.1) most. FDs occurred 410 times, accounting for 4.4 hours of case time (21.57%). Teaching occurred with FD events for 2.4 hours (22.2%), whereas 77.8% of teaching happened outside FD occurrence. Teaching methods shifted from active to passive during FD events to compensate for patient safety. Understanding how FDs impact operative learning will inform faculty development in managing interruptions and improve its integration into resident education. Copyright © 2016. Published by Elsevier Inc.

Highly Reproducible Automated Proteomics Sample Preparation Workflow for Quantitative Mass Spectrometry.

Science.gov (United States)

Fu, Qin; Kowalski, Michael P; Mastali, Mitra; Parker, Sarah J; Sobhani, Kimia; van den Broek, Irene; Hunter, Christie L; Van Eyk, Jennifer E

2018-01-05

Sample preparation for protein quantification by mass spectrometry requires multiple processing steps including denaturation, reduction, alkylation, protease digestion, and peptide cleanup. Scaling these procedures for the analysis of numerous complex biological samples can be tedious and time-consuming, as there are many liquid transfer steps and timed reactions where technical variations can be introduced and propagated. We established an automated sample preparation workflow with a total processing time for 96 samples of 5 h, including a 2 h incubation with trypsin. Peptide cleanup is accomplished by online diversion during the LC/MS/MS analysis. In a selected reaction monitoring (SRM) assay targeting 6 plasma biomarkers and spiked β-galactosidase, mean intraday and interday cyclic voltammograms (CVs) for 5 serum and 5 plasma samples over 5 days were samples repeated on 3 separate days had total CVs below 20%. Similar results were obtained when the workflow was transferred to a second site: 93% of peptides had CVs below 20%. An automated trypsin digestion workflow yields uniformly processed samples in less than 5 h. Reproducible quantification of peptides was observed across replicates, days, instruments, and laboratory sites, demonstrating the broad applicability of this approach.

Business and scientific workflows a web service-oriented approach

CERN Document Server

Tan, Wei

2013-01-01

Focuses on how to use web service computing and service-based workflow technologies to develop timely, effective workflows for both business and scientific fields Utilizing web computing and Service-Oriented Architecture (SOA), Business and Scientific Workflows: A Web Service-Oriented Approach focuses on how to design, analyze, and deploy web service-based workflows for both business and scientific applications in many areas of healthcare and biomedicine. It also discusses and presents the recent research and development results. This informative reference features app

Implementing bioinformatic workflows within the bioextract server

Science.gov (United States)

Computational workflows in bioinformatics are becoming increasingly important in the achievement of scientific advances. These workflows typically require the integrated use of multiple, distributed data sources and analytic tools. The BioExtract Server (http://bioextract.org) is a distributed servi...

Federated Database Services for Wind Tunnel Experiment Workflows

Directory of Open Access Journals (Sweden)

A. Paventhan

2006-01-01

Full Text Available Enabling the full life cycle of scientific and engineering workflows requires robust middleware and services that support effective data management, near-realtime data movement and custom data processing. Many existing solutions exploit the database as a passive metadata catalog. In this paper, we present an approach that makes use of federation of databases to host data-centric wind tunnel application workflows. The user is able to compose customized application workflows based on database services. We provide a reference implementation that leverages typical business tools and technologies: Microsoft SQL Server for database services and Windows Workflow Foundation for workflow services. The application data and user's code are both hosted in federated databases. With the growing interest in XML Web Services in scientific Grids, and with databases beginning to support native XML types and XML Web services, we can expect the role of databases in scientific computation to grow in importance.

Analysing scientific workflows: Why workflows not only connect web services

NARCIS (Netherlands)

Wassink, I.; van der Vet, P.E.; Wolstencroft, K.; Neerincx, P.B.T.; Roos, M.; Rauwerda, H.; Breit, T.M.; Zhang, L.J.

2009-01-01

Life science workflow systems are developed to help life scientists to conveniently connect various programs and web services. In practice however, much time is spent on data conversion, because web services provided by different organisations use different data formats. We have analysed all the

Analysing scientific workflows: why workflows not only connect web services

NARCIS (Netherlands)

Wassink, I.; van der Vet, P.E.; Wolstencroft, K.; Neerincx, P.B.T.; Roos, M.; Rauwerda, H.; Breit, T.M.; Zhang, LJ.

2009-01-01

Life science workflow systems are developed to help life scientists to conveniently connect various programs and web services. In practice however, much time is spent on data conversion, because web services provided by different organisations use different data formats. We have analysed all the

A Model of Workflow Composition for Emergency Management

Science.gov (United States)

Xin, Chen; Bin-ge, Cui; Feng, Zhang; Xue-hui, Xu; Shan-shan, Fu

The common-used workflow technology is not flexible enough in dealing with concurrent emergency situations. The paper proposes a novel model for defining emergency plans, in which workflow segments appear as a constituent part. A formal abstraction, which contains four operations, is defined to compose workflow segments under constraint rule. The software system of the business process resources construction and composition is implemented and integrated into Emergency Plan Management Application System.

Workflow Fault Tree Generation Through Model Checking

DEFF Research Database (Denmark)

Herbert, Luke Thomas; Sharp, Robin

2014-01-01

We present a framework for the automated generation of fault trees from models of realworld process workflows, expressed in a formalised subset of the popular Business Process Modelling and Notation (BPMN) language. To capture uncertainty and unreliability in workflows, we extend this formalism...

Conventions and workflows for using Situs

International Nuclear Information System (INIS)

Wriggers, Willy

2012-01-01

Recent developments of the Situs software suite for multi-scale modeling are reviewed. Typical workflows and conventions encountered during processing of biophysical data from electron microscopy, tomography or small-angle X-ray scattering are described. Situs is a modular program package for the multi-scale modeling of atomic resolution structures and low-resolution biophysical data from electron microscopy, tomography or small-angle X-ray scattering. This article provides an overview of recent developments in the Situs package, with an emphasis on workflows and conventions that are important for practical applications. The modular design of the programs facilitates scripting in the bash shell that allows specific programs to be combined in creative ways that go beyond the original intent of the developers. Several scripting-enabled functionalities, such as flexible transformations of data type, the use of symmetry constraints or the creation of two-dimensional projection images, are described. The processing of low-resolution biophysical maps in such workflows follows not only first principles but often relies on implicit conventions. Situs conventions related to map formats, resolution, correlation functions and feature detection are reviewed and summarized. The compatibility of the Situs workflow with CCP4 conventions and programs is discussed

Needs Analysis and English Teaching in Professional Contexts

Directory of Open Access Journals (Sweden)

Orlando Vian Jr.

2011-07-01

Full Text Available Based on the concept of needs analysis as proposed by Hutchinson and Waters (1987, this article discusses some aspects of English teaching in professional contexts in Brazil. We start with a brief historical view of needs analysis in order to discuss its application to teaching English for specific business purposes in professional contexts and its role for the instructor teaching in-company classes. We also aim to discuss the importance of needs analysis and its relation to the business area, as well as other features related to teaching in these contexts and its relevance to the professionals involved with business English teaching.

GeNNet: an integrated platform for unifying scientific workflows and graph databases for transcriptome data analysis

Directory of Open Access Journals (Sweden)

Raquel L. Costa

2017-07-01

Full Text Available There are many steps in analyzing transcriptome data, from the acquisition of raw data to the selection of a subset of representative genes that explain a scientific hypothesis. The data produced can be represented as networks of interactions among genes and these may additionally be integrated with other biological databases, such as Protein-Protein Interactions, transcription factors and gene annotation. However, the results of these analyses remain fragmented, imposing difficulties, either for posterior inspection of results, or for meta-analysis by the incorporation of new related data. Integrating databases and tools into scientific workflows, orchestrating their execution, and managing the resulting data and its respective metadata are challenging tasks. Additionally, a great amount of effort is equally required to run in-silico experiments to structure and compose the information as needed for analysis. Different programs may need to be applied and different files are produced during the experiment cycle. In this context, the availability of a platform supporting experiment execution is paramount. We present GeNNet, an integrated transcriptome analysis platform that unifies scientific workflows with graph databases for selecting relevant genes according to the evaluated biological systems. It includes GeNNet-Wf, a scientific workflow that pre-loads biological data, pre-processes raw microarray data and conducts a series of analyses including normalization, differential expression inference, clusterization and gene set enrichment analysis. A user-friendly web interface, GeNNet-Web, allows for setting parameters, executing, and visualizing the results of GeNNet-Wf executions. To demonstrate the features of GeNNet, we performed case studies with data retrieved from GEO, particularly using a single-factor experiment in different analysis scenarios. As a result, we obtained differentially expressed genes for which biological functions were

Concurrency & Asynchrony in Declarative Workflows

DEFF Research Database (Denmark)

Debois, Søren; Hildebrandt, Thomas; Slaats, Tijs

2015-01-01

of concurrency in DCR Graphs admits asynchronous execution of declarative workflows both conceptually and by reporting on a prototype implementation of a distributed declarative workflow engine. Both the theoretical development and the implementation is supported by an extended example; moreover, the theoretical....... In this paper, we pro- pose a notion of concurrency for declarative process models, formulated in the context of Dynamic Condition Response (DCR) graphs, and exploiting the so-called “true concurrency” semantics of Labelled Asynchronous Transition Systems. We demonstrate how this semantic underpinning...

The standard-based open workflow system in GeoBrain (Invited)

Science.gov (United States)

Di, L.; Yu, G.; Zhao, P.; Deng, M.

2013-12-01

GeoBrain is an Earth science Web-service system developed and operated by the Center for Spatial Information Science and Systems, George Mason University. In GeoBrain, a standard-based open workflow system has been implemented to accommodate the automated processing of geospatial data through a set of complex geo-processing functions for advanced production generation. The GeoBrain models the complex geoprocessing at two levels, the conceptual and concrete. At the conceptual level, the workflows exist in the form of data and service types defined by ontologies. The workflows at conceptual level are called geo-processing models and cataloged in GeoBrain as virtual product types. A conceptual workflow is instantiated into a concrete, executable workflow when a user requests a product that matches a virtual product type. Both conceptual and concrete workflows are encoded in Business Process Execution Language (BPEL). A BPEL workflow engine, called BPELPower, has been implemented to execute the workflow for the product generation. A provenance capturing service has been implemented to generate the ISO 19115-compliant complete product provenance metadata before and after the workflow execution. The generation of provenance metadata before the workflow execution allows users to examine the usability of the final product before the lengthy and expensive execution takes place. The three modes of workflow executions defined in the ISO 19119, transparent, translucent, and opaque, are available in GeoBrain. A geoprocessing modeling portal has been developed to allow domain experts to develop geoprocessing models at the type level with the support of both data and service/processing ontologies. The geoprocessing models capture the knowledge of the domain experts and are become the operational offering of the products after a proper peer review of models is conducted. An automated workflow composition has been experimented successfully based on ontologies and artificial

Large-Scale Compute-Intensive Analysis via a Combined In-situ and Co-scheduling Workflow Approach

Energy Technology Data Exchange (ETDEWEB)

Messer, Bronson [ORNL; Sewell, Christopher [Los Alamos National Laboratory (LANL); Heitmann, Katrin [ORNL; Finkel, Dr. Hal J [Argonne National Laboratory (ANL); Fasel, Patricia [Los Alamos National Laboratory (LANL); Zagaris, George [Lawrence Livermore National Laboratory (LLNL); Pope, Adrian [Los Alamos National Laboratory (LANL); Habib, Salman [ORNL; Parete-Koon, Suzanne T [ORNL

2015-01-01

Large-scale simulations can produce tens of terabytes of data per analysis cycle, complicating and limiting the efficiency of workflows. Traditionally, outputs are stored on the file system and analyzed in post-processing. With the rapidly increasing size and complexity of simulations, this approach faces an uncertain future. Trending techniques consist of performing the analysis in situ, utilizing the same resources as the simulation, and/or off-loading subsets of the data to a compute-intensive analysis system. We introduce an analysis framework developed for HACC, a cosmological N-body code, that uses both in situ and co-scheduling approaches for handling Petabyte-size outputs. An initial in situ step is used to reduce the amount of data to be analyzed, and to separate out the data-intensive tasks handled off-line. The analysis routines are implemented using the PISTON/VTK-m framework, allowing a single implementation of an algorithm that simultaneously targets a variety of GPU, multi-core, and many-core architectures.

Deploying and sharing U-Compare workflows as web services.

Science.gov (United States)

Kontonatsios, Georgios; Korkontzelos, Ioannis; Kolluru, Balakrishna; Thompson, Paul; Ananiadou, Sophia

2013-02-18

U-Compare is a text mining platform that allows the construction, evaluation and comparison of text mining workflows. U-Compare contains a large library of components that are tuned to the biomedical domain. Users can rapidly develop biomedical text mining workflows by mixing and matching U-Compare's components. Workflows developed using U-Compare can be exported and sent to other users who, in turn, can import and re-use them. However, the resulting workflows are standalone applications, i.e., software tools that run and are accessible only via a local machine, and that can only be run with the U-Compare platform. We address the above issues by extending U-Compare to convert standalone workflows into web services automatically, via a two-click process. The resulting web services can be registered on a central server and made publicly available. Alternatively, users can make web services available on their own servers, after installing the web application framework, which is part of the extension to U-Compare. We have performed a user-oriented evaluation of the proposed extension, by asking users who have tested the enhanced functionality of U-Compare to complete questionnaires that assess its functionality, reliability, usability, efficiency and maintainability. The results obtained reveal that the new functionality is well received by users. The web services produced by U-Compare are built on top of open standards, i.e., REST and SOAP protocols, and therefore, they are decoupled from the underlying platform. Exported workflows can be integrated with any application that supports these open standards. We demonstrate how the newly extended U-Compare enhances the cross-platform interoperability of workflows, by seamlessly importing a number of text mining workflow web services exported from U-Compare into Taverna, i.e., a generic scientific workflow construction platform.

A standard-enabled workflow for synthetic biology

KAUST Repository

Myers, Chris J.

2017-06-15

A synthetic biology workflow is composed of data repositories that provide information about genetic parts, sequence-level design tools to compose these parts into circuits, visualization tools to depict these designs, genetic design tools to select parts to create systems, and modeling and simulation tools to evaluate alternative design choices. Data standards enable the ready exchange of information within such a workflow, allowing repositories and tools to be connected from a diversity of sources. The present paper describes one such workflow that utilizes, among others, the Synthetic Biology Open Language (SBOL) to describe genetic designs, the Systems Biology Markup Language to model these designs, and SBOL Visual to visualize these designs. We describe how a standard-enabled workflow can be used to produce types of design information, including multiple repositories and software tools exchanging information using a variety of data standards. Recently, the ACS Synthetic Biology journal has recommended the use of SBOL in their publications.

Reproducible Research Data Analyses using the Common Workflow Language standards

CERN Multimedia

CERN. Geneva

2017-01-01

This talk will introduce the Common Workflow Language project. In July 2016 they released standards that enable the portable, interoperable, and executable description of command line data analysis tools and workflow made from those tools. These descriptions are enhanced by CWL's first class (but optional) support for Docker containers. CWL originated from the world of bioinformatics but is not discipline specific and is gaining interest and use in other fields. Attendees who want to play with CWL prior to attending the presentation are invited to go through the "Gentle Introduction to the Common Workflow Language" tutorial on any OS X or Linux machine on their own time. About the speaker Michael R. Crusoe is one of the co-founders of the CWL project and is the CWL Community Engineer. His facilitation, technical contributions, and training on behalf of the project draw from his time as the former lead developer of C. Titus Brown's k-h-mer project, his previous career as a sysadmin and programmer, and his ex...

Efficient Workflows for Curation of Heterogeneous Data Supporting Modeling of U-Nb Alloy Aging

International Nuclear Information System (INIS)

Ward, Logan Timothy; Hackenberg, Robert Errol

2016-01-01

These are slides from a presentation summarizing a graduate research associate's summer project. The following topics are covered in these slides: data challenges in materials, aging in U-Nb Alloys, Building an Aging Model, Different Phase Trans. in U-Nb, the Challenge, Storing Materials Data, Example Data Source, Organizing Data: What is a Schema?, What does a 'XML Schema' look like?, Our Data Schema: Nice and Simple, Storing Data: Materials Data Curation System (MDCS), Problem with MDCS: Slow Data Entry, Getting Literature into MDCS, Staging Data in Excel Document, Final Result: MDCS Records, Analyzing Image Data, Process for Making TTT Diagram, Bottleneck Number 1: Image Analysis, Fitting a TTP Boundary, Fitting a TTP Curve: Comparable Results, How Does it Compare to Our Data?, Image Analysis Workflow, Curating Hardness Records, Hardness Data: Two Key Decisions, Before Peak Age? - Automation, Interactive Viz, Which Transformation?, Microstructure-Informed Model, Tracking the Entire Process, General Problem with Property Models, Pinyon: Toolkit for Managing Model Creation, Tracking Individual Decisions, Jupyter: Docs and Code in One File, Hardness Analysis Workflow, Workflow for Aging Models, and conclusions.

Efficient Workflows for Curation of Heterogeneous Data Supporting Modeling of U-Nb Alloy Aging

Energy Technology Data Exchange (ETDEWEB)

Ward, Logan Timothy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hackenberg, Robert Errol [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-08-31

These are slides from a presentation summarizing a graduate research associate's summer project. The following topics are covered in these slides: data challenges in materials, aging in U-Nb Alloys, Building an Aging Model, Different Phase Trans. in U-Nb, the Challenge, Storing Materials Data, Example Data Source, Organizing Data: What is a Schema?, What does a "XML Schema" look like?, Our Data Schema: Nice and Simple, Storing Data: Materials Data Curation System (MDCS), Problem with MDCS: Slow Data Entry, Getting Literature into MDCS, Staging Data in Excel Document, Final Result: MDCS Records, Analyzing Image Data, Process for Making TTT Diagram, Bottleneck Number 1: Image Analysis, Fitting a TTP Boundary, Fitting a TTP Curve: Comparable Results, How Does it Compare to Our Data?, Image Analysis Workflow, Curating Hardness Records, Hardness Data: Two Key Decisions, Before Peak Age? - Automation, Interactive Viz, Which Transformation?, Microstructure-Informed Model, Tracking the Entire Process, General Problem with Property Models, Pinyon: Toolkit for Managing Model Creation, Tracking Individual Decisions, Jupyter: Docs and Code in One File, Hardness Analysis Workflow, Workflow for Aging Models, and conclusions.

SU-E-T-419: Workflow and FMEA in a New Proton Therapy (PT) Facility

International Nuclear Information System (INIS)

Cheng, C; Wessels, B; Hamilton, H; Difranco, T; Mansur, D

2014-01-01

Purpose: Workflow is an important component in the operational planning of a new proton facility. By integrating the concept of failure mode and effect analysis (FMEA) and traditional QA requirements, a workflow for a proton therapy treatment course is set up. This workflow serves as the blue print for the planning of computer hardware/software requirements and network flow. A slight modification of the workflow generates a process map(PM) for FMEA and the planning of QA program in PT. Methods: A flowchart is first developed outlining the sequence of processes involved in a PT treatment course. Each process consists of a number of sub-processes to encompass a broad scope of treatment and QA procedures. For each subprocess, the personnel involved, the equipment needed and the computer hardware/software as well as network requirements are defined by a team of clinical staff, administrators and IT personnel. Results: Eleven intermediate processes with a total of 70 sub-processes involved in a PT treatment course are identified. The number of sub-processes varies, ranging from 2-12. The sub-processes within each process are used for the operational planning. For example, in the CT-Sim process, there are 12 sub-processes: three involve data entry/retrieval from a record-and-verify system, two controlled by the CT computer, two require department/hospital network, and the other five are setup procedures. IT then decides the number of computers needed and the software and network requirement. By removing the traditional QA procedures from the workflow, a PM is generated for FMEA analysis to design a QA program for PT. Conclusion: Significant efforts are involved in the development of the workflow in a PT treatment course. Our hybrid model of combining FMEA and traditional QA program serves a duo purpose of efficient operational planning and designing of a QA program in PT

a Standardized Approach to Topographic Data Processing and Workflow Management

Science.gov (United States)

Wheaton, J. M.; Bailey, P.; Glenn, N. F.; Hensleigh, J.; Hudak, A. T.; Shrestha, R.; Spaete, L.

2013-12-01

An ever-increasing list of options exist for collecting high resolution topographic data, including airborne LIDAR, terrestrial laser scanners, bathymetric SONAR and structure-from-motion. An equally rich, arguably overwhelming, variety of tools exists with which to organize, quality control, filter, analyze and summarize these data. However, scientists are often left to cobble together their analysis as a series of ad hoc steps, often using custom scripts and one-time processes that are poorly documented and rarely shared with the community. Even when literature-cited software tools are used, the input and output parameters differ from tool to tool. These parameters are rarely archived and the steps performed lost, making the analysis virtually impossible to replicate precisely. What is missing is a coherent, robust, framework for combining reliable, well-documented topographic data-processing steps into a workflow that can be repeated and even shared with others. We have taken several popular topographic data processing tools - including point cloud filtering and decimation as well as DEM differencing - and defined a common protocol for passing inputs and outputs between them. This presentation describes a free, public online portal that enables scientists to create custom workflows for processing topographic data using a number of popular topographic processing tools. Users provide the inputs required for each tool and in what sequence they want to combine them. This information is then stored for future reuse (and optionally sharing with others) before the user then downloads a single package that contains all the input and output specifications together with the software tools themselves. The user then launches the included batch file that executes the workflow on their local computer against their topographic data. This ZCloudTools architecture helps standardize, automate and archive topographic data processing. It also represents a forum for discovering and

The complete digital workflow in fixed prosthodontics: a systematic review.

Science.gov (United States)

Joda, Tim; Zarone, Fernando; Ferrari, Marco

2017-09-19

The continuous development in dental processing ensures new opportunities in the field of fixed prosthodontics in a complete virtual environment without any physical model situations. The aim was to compare fully digitalized workflows to conventional and/or mixed analog-digital workflows for the treatment with tooth-borne or implant-supported fixed reconstructions. A PICO strategy was executed using an electronic (MEDLINE, EMBASE, Google Scholar) plus manual search up to 2016-09-16 focusing on RCTs investigating complete digital workflows in fixed prosthodontics with regard to economics or esthetics or patient-centered outcomes with or without follow-up or survival/success rate analysis as well as complication assessment of at least 1 year under function. The search strategy was assembled from MeSH-Terms and unspecific free-text words: {(("Dental Prosthesis" [MeSH]) OR ("Crowns" [MeSH]) OR ("Dental Prosthesis, Implant-Supported" [MeSH])) OR ((crown) OR (fixed dental prosthesis) OR (fixed reconstruction) OR (dental bridge) OR (implant crown) OR (implant prosthesis) OR (implant restoration) OR (implant reconstruction))} AND {("Computer-Aided Design" [MeSH]) OR ((digital workflow) OR (digital technology) OR (computerized dentistry) OR (intraoral scan) OR (digital impression) OR (scanbody) OR (virtual design) OR (digital design) OR (cad/cam) OR (rapid prototyping) OR (monolithic) OR (full-contour))} AND {("Dental Technology" [MeSH) OR ((conventional workflow) OR (lost-wax-technique) OR (porcelain-fused-to-metal) OR (PFM) OR (implant impression) OR (hand-layering) OR (veneering) OR (framework))} AND {(("Study, Feasibility" [MeSH]) OR ("Survival" [MeSH]) OR ("Success" [MeSH]) OR ("Economics" [MeSH]) OR ("Costs, Cost Analysis" [MeSH]) OR ("Esthetics, Dental" [MeSH]) OR ("Patient Satisfaction" [MeSH])) OR ((feasibility) OR (efficiency) OR (patient-centered outcome))}. Assessment of risk of bias in selected studies was done at a 'trial level' including random sequence

Agreement Workflow Tool (AWT)

Data.gov (United States)

Social Security Administration — The Agreement Workflow Tool (AWT) is a role-based Intranet application used for processing SSA's Reimbursable Agreements according to SSA's standards. AWT provides...

A workflow learning model to improve geovisual analytics utility.

Science.gov (United States)

Roth, Robert E; Maceachren, Alan M; McCabe, Craig A

2009-01-01

the concept of scientific workflows. Second, we implemented an interface in the G-EX Portal Learn Module to demonstrate the workflow learning model. The workflow interface allows users to drag learning artifacts uploaded to the G-EX Portal onto a central whiteboard and then annotate the workflow using text and drawing tools. Once completed, users can visit the assembled workflow to get an idea of the kind, number, and scale of analysis steps, view individual learning artifacts associated with each node in the workflow, and ask questions about the overall workflow or individual learning artifacts through the associated forums. An example learning workflow in the domain of epidemiology is provided to demonstrate the effectiveness of the approach. RESULTS/CONCLUSIONS: In the context of geovisual analytics, GIScientists are not only responsible for developing software to facilitate visually-mediated reasoning about large and complex spatiotemporal information, but also for ensuring that this software works. The workflow learning model discussed in this paper and demonstrated in the G-EX Portal Learn Module is one approach to improving the utility of geovisual analytics software. While development of the G-EX Portal Learn Module is ongoing, we expect to release the G-EX Portal Learn Module by Summer 2009.

A Tool Supporting Collaborative Data Analytics Workflow Design and Management

Science.gov (United States)

Zhang, J.; Bao, Q.; Lee, T. J.

2016-12-01

Collaborative experiment design could significantly enhance the sharing and adoption of the data analytics algorithms and models emerged in Earth science. Existing data-oriented workflow tools, however, are not suitable to support collaborative design of such a workflow, to name a few, to support real-time co-design; to track how a workflow evolves over time based on changing designs contributed by multiple Earth scientists; and to capture and retrieve collaboration knowledge on workflow design (discussions that lead to a design). To address the aforementioned challenges, we have designed and developed a technique supporting collaborative data-oriented workflow composition and management, as a key component toward supporting big data collaboration through the Internet. Reproducibility and scalability are two major targets demanding fundamental infrastructural support. One outcome of the project os a software tool, supporting an elastic number of groups of Earth scientists to collaboratively design and compose data analytics workflows through the Internet. Instead of recreating the wheel, we have extended an existing workflow tool VisTrails into an online collaborative environment as a proof of concept.

On the Support of Scientific Workflows over Pub/Sub Brokers

Directory of Open Access Journals (Sweden)

Edwin Cedeño

2013-08-01

Full Text Available The execution of scientific workflows is gaining importance as more computing resources are available in the form of grid environments. The Publish/Subscribe paradigm offers well-proven solutions for sustaining distributed scenarios while maintaining the high level of task decoupling required by scientific workflows. In this paper, we propose a new model for supporting scientific workflows that improves the dissemination of control events. The proposed solution is based on the mapping of workflow tasks to the underlying Pub/Sub event layer, and the definition of interfaces and procedures for execution on brokers. In this paper we also analyze the strengths and weaknesses of current solutions that are based on existing message exchange models for scientific workflows. Finally, we explain how our model improves the information dissemination, event filtering, task decoupling and the monitoring of scientific workflows.

On the support of scientific workflows over Pub/Sub brokers.

Science.gov (United States)

Morales, Augusto; Robles, Tomas; Alcarria, Ramon; Cedeño, Edwin

2013-08-20

The execution of scientific workflows is gaining importance as more computing resources are available in the form of grid environments. The Publish/Subscribe paradigm offers well-proven solutions for sustaining distributed scenarios while maintaining the high level of task decoupling required by scientific workflows. In this paper, we propose a new model for supporting scientific workflows that improves the dissemination of control events. The proposed solution is based on the mapping of workflow tasks to the underlying Pub/Sub event layer, and the definition of interfaces and procedures for execution on brokers. In this paper we also analyze the strengths and weaknesses of current solutions that are based on existing message exchange models for scientific workflows. Finally, we explain how our model improves the information dissemination, event filtering, task decoupling and the monitoring of scientific workflows.

Declarative Modelling and Safe Distribution of Healthcare Workflows

DEFF Research Database (Denmark)

Hildebrandt, Thomas; Mukkamala, Raghava Rao; Slaats, Tijs

2012-01-01

We present a formal technique for safe distribution of workflow processes described declaratively as Nested Condition Response (NCR) Graphs and apply the technique to a distributed healthcare workflow. Concretely, we provide a method to synthesize from a NCR Graph and any distribution of its events......-organizational case management. The contributions of this paper is to adapt the technique to allow for nested processes and milestones and to apply it to a healthcare workflow identified in a previous field study at danish hospitals....

Workflow Lexicons in Healthcare: Validation of the SWIM Lexicon.

Science.gov (United States)

Meenan, Chris; Erickson, Bradley; Knight, Nancy; Fossett, Jewel; Olsen, Elizabeth; Mohod, Prerna; Chen, Joseph; Langer, Steve G

2017-06-01

For clinical departments seeking to successfully navigate the challenges of modern health reform, obtaining access to operational and clinical data to establish and sustain goals for improving quality is essential. More broadly, health delivery organizations are also seeking to understand performance across multiple facilities and often across multiple electronic medical record (EMR) systems. Interpreting operational data across multiple vendor systems can be challenging, as various manufacturers may describe different departmental workflow steps in different ways and sometimes even within a single vendor's installed customer base. In 2012, The Society for Imaging Informatics in Medicine (SIIM) recognized the need for better quality and performance data standards and formed SIIM's Workflow Initiative for Medicine (SWIM), an initiative designed to consistently describe workflow steps in radiology departments as well as defining operational quality metrics. The SWIM lexicon was published as a working model to describe operational workflow steps and quality measures. We measured the prevalence of the SWIM lexicon workflow steps in both academic and community radiology environments using real-world patient observations and correlated that information with automatically captured workflow steps from our clinical information systems. Our goal was to measure frequency of occurrence of workflow steps identified by the SWIM lexicon in a real-world clinical setting, as well as to correlate how accurately departmental information systems captured patient flow through our health facility.

An optimal big data workflow for biomedical image analysis

Directory of Open Access Journals (Sweden)

Aurelle Tchagna Kouanou

Full Text Available Background and objective: In the medical field, data volume is increasingly growing, and traditional methods cannot manage it efficiently. In biomedical computation, the continuous challenges are: management, analysis, and storage of the biomedical data. Nowadays, big data technology plays a significant role in the management, organization, and analysis of data, using machine learning and artificial intelligence techniques. It also allows a quick access to data using the NoSQL database. Thus, big data technologies include new frameworks to process medical data in a manner similar to biomedical images. It becomes very important to develop methods and/or architectures based on big data technologies, for a complete processing of biomedical image data. Method: This paper describes big data analytics for biomedical images, shows examples reported in the literature, briefly discusses new methods used in processing, and offers conclusions. We argue for adapting and extending related work methods in the field of big data software, using Hadoop and Spark frameworks. These provide an optimal and efficient architecture for biomedical image analysis. This paper thus gives a broad overview of big data analytics to automate biomedical image diagnosis. A workflow with optimal methods and algorithm for each step is proposed. Results: Two architectures for image classification are suggested. We use the Hadoop framework to design the first, and the Spark framework for the second. The proposed Spark architecture allows us to develop appropriate and efficient methods to leverage a large number of images for classification, which can be customized with respect to each other. Conclusions: The proposed architectures are more complete, easier, and are adaptable in all of the steps from conception. The obtained Spark architecture is the most complete, because it facilitates the implementation of algorithms with its embedded libraries. Keywords: Biomedical images, Big

A virtual data language and system for scientific workflow management in data grid environments

Science.gov (United States)

Zhao, Yong

With advances in scientific instrumentation and simulation, scientific data is growing fast in both size and analysis complexity. So-called Data Grids aim to provide high performance, distributed data analysis infrastructure for data- intensive sciences, where scientists distributed worldwide need to extract information from large collections of data, and to share both data products and the resources needed to produce and store them. However, the description, composition, and execution of even logically simple scientific workflows are often complicated by the need to deal with "messy" issues like heterogeneous storage formats and ad-hoc file system structures. We show how these difficulties can be overcome via a typed workflow notation called virtual data language, within which issues of physical representation are cleanly separated from logical typing, and by the implementation of this notation within the context of a powerful virtual data system that supports distributed execution. The resulting language and system are capable of expressing complex workflows in a simple compact form, enacting those workflows in distributed environments, monitoring and recording the execution processes, and tracing the derivation history of data products. We describe the motivation, design, implementation, and evaluation of the virtual data language and system, and the application of the virtual data paradigm in various science disciplines, including astronomy, cognitive neuroscience.

Integrating configuration workflows with project management system

International Nuclear Information System (INIS)

Nilsen, Dimitri; Weber, Pavel

2014-01-01

The complexity of the heterogeneous computing resources, services and recurring infrastructure changes at the GridKa WLCG Tier-1 computing center require a structured approach to configuration management and optimization of interplay between functional components of the whole system. A set of tools deployed at GridKa, including Puppet, Redmine, Foreman, SVN and Icinga, provides the administrative environment giving the possibility to define and develop configuration workflows, reduce the administrative effort and improve sustainable operation of the whole computing center. In this presentation we discuss the developed configuration scenarios implemented at GridKa, which we use for host installation, service deployment, change management procedures, service retirement etc. The integration of Puppet with a project management tool like Redmine provides us with the opportunity to track problem issues, organize tasks and automate these workflows. The interaction between Puppet and Redmine results in automatic updates of the issues related to the executed workflow performed by different system components. The extensive configuration workflows require collaboration and interaction between different departments like network, security, production etc. at GridKa. Redmine plugins developed at GridKa and integrated in its administrative environment provide an effective way of collaboration within the GridKa team. We present the structural overview of the software components, their connections, communication protocols and show a few working examples of the workflows and their automation.

Modeling Complex Workflow in Molecular Diagnostics

Science.gov (United States)

Gomah, Mohamed E.; Turley, James P.; Lu, Huimin; Jones, Dan

2010-01-01

One of the hurdles to achieving personalized medicine has been implementing the laboratory processes for performing and reporting complex molecular tests. The rapidly changing test rosters and complex analysis platforms in molecular diagnostics have meant that many clinical laboratories still use labor-intensive manual processing and testing without the level of automation seen in high-volume chemistry and hematology testing. We provide here a discussion of design requirements and the results of implementation of a suite of lab management tools that incorporate the many elements required for use of molecular diagnostics in personalized medicine, particularly in cancer. These applications provide the functionality required for sample accessioning and tracking, material generation, and testing that are particular to the evolving needs of individualized molecular diagnostics. On implementation, the applications described here resulted in improvements in the turn-around time for reporting of more complex molecular test sets, and significant changes in the workflow. Therefore, careful mapping of workflow can permit design of software applications that simplify even the complex demands of specialized molecular testing. By incorporating design features for order review, software tools can permit a more personalized approach to sample handling and test selection without compromising efficiency. PMID:20007844

Grid workflow validation using ontology-based tacit knowledge: A case study for quantitative remote sensing applications

Science.gov (United States)

Liu, Jia; Liu, Longli; Xue, Yong; Dong, Jing; Hu, Yingcui; Hill, Richard; Guang, Jie; Li, Chi

2017-01-01

Workflow for remote sensing quantitative retrieval is the ;bridge; between Grid services and Grid-enabled application of remote sensing quantitative retrieval. Workflow averts low-level implementation details of the Grid and hence enables users to focus on higher levels of application. The workflow for remote sensing quantitative retrieval plays an important role in remote sensing Grid and Cloud computing services, which can support the modelling, construction and implementation of large-scale complicated applications of remote sensing science. The validation of workflow is important in order to support the large-scale sophisticated scientific computation processes with enhanced performance and to minimize potential waste of time and resources. To research the semantic correctness of user-defined workflows, in this paper, we propose a workflow validation method based on tacit knowledge research in the remote sensing domain. We first discuss the remote sensing model and metadata. Through detailed analysis, we then discuss the method of extracting the domain tacit knowledge and expressing the knowledge with ontology. Additionally, we construct the domain ontology with Protégé. Through our experimental study, we verify the validity of this method in two ways, namely data source consistency error validation and parameters matching error validation.

Workflow as a Service in the Cloud: Architecture and Scheduling Algorithms

Science.gov (United States)

Wang, Jianwu; Korambath, Prakashan; Altintas, Ilkay; Davis, Jim; Crawl, Daniel

2017-01-01

With more and more workflow systems adopting cloud as their execution environment, it becomes increasingly challenging on how to efficiently manage various workflows, virtual machines (VMs) and workflow execution on VM instances. To make the system scalable and easy-to-extend, we design a Workflow as a Service (WFaaS) architecture with independent services. A core part of the architecture is how to efficiently respond continuous workflow requests from users and schedule their executions in the cloud. Based on different targets, we propose four heuristic workflow scheduling algorithms for the WFaaS architecture, and analyze the differences and best usages of the algorithms in terms of performance, cost and the price/performance ratio via experimental studies. PMID:29399237

Workflow as a Service in the Cloud: Architecture and Scheduling Algorithms.

Science.gov (United States)

Wang, Jianwu; Korambath, Prakashan; Altintas, Ilkay; Davis, Jim; Crawl, Daniel

2014-01-01

With more and more workflow systems adopting cloud as their execution environment, it becomes increasingly challenging on how to efficiently manage various workflows, virtual machines (VMs) and workflow execution on VM instances. To make the system scalable and easy-to-extend, we design a Workflow as a Service (WFaaS) architecture with independent services. A core part of the architecture is how to efficiently respond continuous workflow requests from users and schedule their executions in the cloud. Based on different targets, we propose four heuristic workflow scheduling algorithms for the WFaaS architecture, and analyze the differences and best usages of the algorithms in terms of performance, cost and the price/performance ratio via experimental studies.

A reliable computational workflow for the selection of optimal screening libraries.

Science.gov (United States)

Gilad, Yocheved; Nadassy, Katalin; Senderowitz, Hanoch

2015-01-01

The experimental screening of compound collections is a common starting point in many drug discovery projects. Successes of such screening campaigns critically depend on the quality of the screened library. Many libraries are currently available from different vendors yet the selection of the optimal screening library for a specific project is challenging. We have devised a novel workflow for the rational selection of project-specific screening libraries. The workflow accepts as input a set of virtual candidate libraries and applies the following steps to each library: (1) data curation; (2) assessment of ADME/T profile; (3) assessment of the number of promiscuous binders/frequent HTS hitters; (4) assessment of internal diversity; (5) assessment of similarity to known active compound(s) (optional); (6) assessment of similarity to in-house or otherwise accessible compound collections (optional). For ADME/T profiling, Lipinski's and Veber's rule-based filters were implemented and a new blood brain barrier permeation model was developed and validated (85 and 74 % success rate for training set and test set, respectively). Diversity and similarity descriptors which demonstrated best performances in terms of their ability to select either diverse or focused sets of compounds from three databases (Drug Bank, CMC and CHEMBL) were identified and used for diversity and similarity assessments. The workflow was used to analyze nine common screening libraries available from six vendors. The results of this analysis are reported for each library providing an assessment of its quality. Furthermore, a consensus approach was developed to combine the results of these analyses into a single score for selecting the optimal library under different scenarios. We have devised and tested a new workflow for the rational selection of screening libraries under different scenarios. The current workflow was implemented using the Pipeline Pilot software yet due to the usage of generic

AutoDrug: fully automated macromolecular crystallography workflows for fragment-based drug discovery

International Nuclear Information System (INIS)

Tsai, Yingssu; McPhillips, Scott E.; González, Ana; McPhillips, Timothy M.; Zinn, Daniel; Cohen, Aina E.; Feese, Michael D.; Bushnell, David; Tiefenbrunn, Theresa; Stout, C. David; Ludaescher, Bertram; Hedman, Britt; Hodgson, Keith O.; Soltis, S. Michael

2013-01-01

New software has been developed for automating the experimental and data-processing stages of fragment-based drug discovery at a macromolecular crystallography beamline. A new workflow-automation framework orchestrates beamline-control and data-analysis software while organizing results from multiple samples. AutoDrug is software based upon the scientific workflow paradigm that integrates the Stanford Synchrotron Radiation Lightsource macromolecular crystallography beamlines and third-party processing software to automate the crystallography steps of the fragment-based drug-discovery process. AutoDrug screens a cassette of fragment-soaked crystals, selects crystals for data collection based on screening results and user-specified criteria and determines optimal data-collection strategies. It then collects and processes diffraction data, performs molecular replacement using provided models and detects electron density that is likely to arise from bound fragments. All processes are fully automated, i.e. are performed without user interaction or supervision. Samples can be screened in groups corresponding to particular proteins, crystal forms and/or soaking conditions. A single AutoDrug run is only limited by the capacity of the sample-storage dewar at the beamline: currently 288 samples. AutoDrug was developed in conjunction with RestFlow, a new scientific workflow-automation framework. RestFlow simplifies the design of AutoDrug by managing the flow of data and the organization of results and by orchestrating the execution of computational pipeline steps. It also simplifies the execution and interaction of third-party programs and the beamline-control system. Modeling AutoDrug as a scientific workflow enables multiple variants that meet the requirements of different user groups to be developed and supported. A workflow tailored to mimic the crystallography stages comprising the drug-discovery pipeline of CoCrystal Discovery Inc. has been deployed and successfully

Workflow Dynamics and the Imaging Value Chain: Quantifying the Effect of Designating a Nonimage-Interpretive Task Workflow.

Science.gov (United States)

Lee, Matthew H; Schemmel, Andrew J; Pooler, B Dustin; Hanley, Taylor; Kennedy, Tabassum A; Field, Aaron S; Wiegmann, Douglas; Yu, John-Paul J

To assess the impact of separate non-image interpretive task and image-interpretive task workflows in an academic neuroradiology practice. A prospective, randomized, observational investigation of a centralized academic neuroradiology reading room was performed. The primary reading room fellow was observed over a one-month period using a time-and-motion methodology, recording frequency and duration of tasks performed. Tasks were categorized into separate image interpretive and non-image interpretive workflows. Post-intervention observation of the primary fellow was repeated following the implementation of a consult assistant responsible for non-image interpretive tasks. Pre- and post-intervention data were compared. Following separation of image-interpretive and non-image interpretive workflows, time spent on image-interpretive tasks by the primary fellow increased from 53.8% to 73.2% while non-image interpretive tasks decreased from 20.4% to 4.4%. Mean time duration of image interpretation nearly doubled, from 05:44 to 11:01 (p = 0.002). Decreases in specific non-image interpretive tasks, including phone calls/paging (2.86/hr versus 0.80/hr), in-room consultations (1.36/hr versus 0.80/hr), and protocoling (0.99/hr versus 0.10/hr), were observed. The consult assistant experienced 29.4 task switching events per hour. Rates of specific non-image interpretive tasks for the CA were 6.41/hr for phone calls/paging, 3.60/hr for in-room consultations, and 3.83/hr for protocoling. Separating responsibilities into NIT and IIT workflows substantially increased image interpretation time and decreased TSEs for the primary fellow. Consolidation of NITs into a separate workflow may allow for more efficient task completion. Copyright © 2017 Elsevier Inc. All rights reserved.

Workflow optimisation for multimodal imaging procedures: a case of combined X-ray and MRI-guided TACE.

Science.gov (United States)

Fernández-Gutiérrez, Fabiola; Wolska-Krawczyk, Malgorzata; Buecker, Arno; Houston, J Graeme; Melzer, Andreas

2017-02-01

This study presents a framework for workflow optimisation of multimodal image-guided procedures (MIGP) based on discrete event simulation (DES). A case of a combined X-Ray and magnetic resonance image-guided transarterial chemoembolisation (TACE) is presented to illustrate the application of this method. We used a ranking and selection optimisation algorithm to measure the performance of a number of proposed alternatives to improve a current scenario. A DES model was implemented with detail data collected from 59 TACE procedures and durations of magnetic resonance imaging (MRI) diagnostic procedures usually performed in a common MRI suite. Fourteen alternatives were proposed and assessed to minimise the waiting times and improve workflow. Data analysis observed an average of 20.68 (7.68) min of waiting between angiography and MRI for TACE patients in 71.19% of the cases. Following the optimisation analysis, an alternative was identified to reduce waiting times in angiography suite up to 48.74%. The model helped to understand and detect 'bottlenecks' during multimodal TACE procedures, identifying a better alternative to the current workflow and reducing waiting times. Simulation-based workflow analysis provides a cost-effective way to face some of the challenges of introducing MIGP in clinical radiology, highligthed in this study.

A standard-enabled workflow for synthetic biology.

Science.gov (United States)

Myers, Chris J; Beal, Jacob; Gorochowski, Thomas E; Kuwahara, Hiroyuki; Madsen, Curtis; McLaughlin, James Alastair; Mısırlı, Göksel; Nguyen, Tramy; Oberortner, Ernst; Samineni, Meher; Wipat, Anil; Zhang, Michael; Zundel, Zach

2017-06-15

A synthetic biology workflow is composed of data repositories that provide information about genetic parts, sequence-level design tools to compose these parts into circuits, visualization tools to depict these designs, genetic design tools to select parts to create systems, and modeling and simulation tools to evaluate alternative design choices. Data standards enable the ready exchange of information within such a workflow, allowing repositories and tools to be connected from a diversity of sources. The present paper describes one such workflow that utilizes, among others, the Synthetic Biology Open Language (SBOL) to describe genetic designs, the Systems Biology Markup Language to model these designs, and SBOL Visual to visualize these designs. We describe how a standard-enabled workflow can be used to produce types of design information, including multiple repositories and software tools exchanging information using a variety of data standards. Recently, the ACS Synthetic Biology journal has recommended the use of SBOL in their publications. © 2017 The Author(s); published by Portland Press Limited on behalf of the Biochemical Society.

Scientific workflows as productivity tools for drug discovery.

Science.gov (United States)

Shon, John; Ohkawa, Hitomi; Hammer, Juergen

2008-05-01

Large pharmaceutical companies annually invest tens to hundreds of millions of US dollars in research informatics to support their early drug discovery processes. Traditionally, most of these investments are designed to increase the efficiency of drug discovery. The introduction of do-it-yourself scientific workflow platforms has enabled research informatics organizations to shift their efforts toward scientific innovation, ultimately resulting in a possible increase in return on their investments. Unlike the handling of most scientific data and application integration approaches, researchers apply scientific workflows to in silico experimentation and exploration, leading to scientific discoveries that lie beyond automation and integration. This review highlights some key requirements for scientific workflow environments in the pharmaceutical industry that are necessary for increasing research productivity. Examples of the application of scientific workflows in research and a summary of recent platform advances are also provided.

A three-level atomicity model for decentralized workflow management systems

Science.gov (United States)

Ben-Shaul, Israel Z.; Heineman, George T.

1996-12-01

A workflow management system (WFMS) employs a workflow manager (WM) to execute and automate the various activities within a workflow. To protect the consistency of data, the WM encapsulates each activity with a transaction; a transaction manager (TM) then guarantees the atomicity of activities. Since workflows often group several activities together, the TM is responsible for guaranteeing the atomicity of these units. There are scalability issues, however, with centralized WFMSs. Decentralized WFMSs provide an architecture for multiple autonomous WFMSs to interoperate, thus accommodating multiple workflows and geographically-dispersed teams. When atomic units are composed of activities spread across multiple WFMSs, however, there is a conflict between global atomicity and local autonomy of each WFMS. This paper describes a decentralized atomicity model that enables workflow administrators to specify the scope of multi-site atomicity based upon the desired semantics of multi-site tasks in the decentralized WFMS. We describe an architecture that realizes our model and execution paradigm.

Distributed Workflow Service Composition Based on CTR Technology

Science.gov (United States)

Feng, Zhilin; Ye, Yanming

Recently, WS-BPEL has gradually become the basis of a standard for web service description and composition. However, WS-BPEL cannot efficiently describe distributed workflow services for lacking of special expressive power and formal semantics. This paper presents a novel method for modeling distributed workflow service composition with Concurrent TRansaction logic (CTR). The syntactic structure of WS-BPEL and CTR are analyzed, and new rules of mapping WS-BPEL into CTR are given. A case study is put forward to show that the proposed method is appropriate for modeling workflow business services under distributed environments.

What is needed for effective open access workflows?

CERN Multimedia

CERN. Geneva

2017-01-01

Institutions and funders are pushing forward open access with ever new guidelines and policies. Since institutional repositories are important maintainers of green open access, they should support easy and fast workflows for researchers and libraries to release publications. Based on the requirements specification of researchers, libraries and publishers, possible supporting software extensions are discussed. How does a typical workflow look like? What has to be considered by the researchers and by the editors in the library before releasing a green open access publication? Where and how can software support and improve existing workflows?

Teaching Information Security with Workflow Technology--A Case Study Approach

Science.gov (United States)

He, Wu; Kshirsagar, Ashish; Nwala, Alexander; Li, Yaohang

2014-01-01

In recent years, there has been a significant increase in the demand from professionals in different areas for improving the curricula regarding information security. The use of authentic case studies in teaching information security offers the potential to effectively engage students in active learning. In this paper, the authors introduce the…

Two-Layer Transaction Management for Workflow Management Applications

NARCIS (Netherlands)

Grefen, P.W.P.J.; Vonk, J.; Boertjes, E.M.; Apers, Peter M.G.

Workflow management applications require advanced transaction management that is not offered by traditional database systems. For this reason, a number of extended transaction models has been proposed in the past. None of these models seems completely adequate, though, because workflow management

An Optimized DNA Analysis Workflow for the Sampling, Extraction, and Concentration of DNA obtained from Archived Latent Fingerprints.

Science.gov (United States)

Solomon, April D; Hytinen, Madison E; McClain, Aryn M; Miller, Marilyn T; Dawson Cruz, Tracey

2018-01-01

DNA profiles have been obtained from fingerprints, but there is limited knowledge regarding DNA analysis from archived latent fingerprints-touch DNA "sandwiched" between adhesive and paper. Thus, this study sought to comparatively analyze a variety of collection and analytical methods in an effort to seek an optimized workflow for this specific sample type. Untreated and treated archived latent fingerprints were utilized to compare different biological sampling techniques, swab diluents, DNA extraction systems, DNA concentration practices, and post-amplification purification methods. Archived latent fingerprints disassembled and sampled via direct cutting, followed by DNA extracted using the QIAamp® DNA Investigator Kit, and concentration with Centri-Sep™ columns increased the odds of obtaining an STR profile. Using the recommended DNA workflow, 9 of the 10 samples provided STR profiles, which included 7-100% of the expected STR alleles and two full profiles. Thus, with carefully selected procedures, archived latent fingerprints can be a viable DNA source for criminal investigations including cold/postconviction cases. © 2017 American Academy of Forensic Sciences.

The MPO system for automatic workflow documentation

Energy Technology Data Exchange (ETDEWEB)

Abla, G.; Coviello, E.N.; Flanagan, S.M. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Greenwald, M. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Lee, X. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Romosan, A. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Schissel, D.P., E-mail: schissel@fusion.gat.com [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Shoshani, A. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Stillerman, J.; Wright, J. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Wu, K.J. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)

2016-11-15

Highlights: • Data model, infrastructure, and tools for data tracking, cataloging, and integration. • Automatically document workflow and data provenance in the widest sense. • Fusion Science as test bed but the system’s framework and data model is quite general. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for critical applications. However, it is not the mere existence of data that is important, but our ability to make use of it. Experience has shown that when metadata is better organized and more complete, the underlying data becomes more useful. Traditionally, capturing the steps of scientific workflows and metadata was the role of the lab notebook, but the digital era has resulted instead in the fragmentation of data, processing, and annotation. This paper presents the Metadata, Provenance, and Ontology (MPO) System, the software that can automate the documentation of scientific workflows and associated information. Based on recorded metadata, it provides explicit information about the relationships among the elements of workflows in notebook form augmented with directed acyclic graphs. A set of web-based graphical navigation tools and Application Programming Interface (API) have been created for searching and browsing, as well as programmatically accessing the workflows and data. We describe the MPO concepts and its software architecture. We also report the current status of the software as well as the initial deployment experience.

The MPO system for automatic workflow documentation

International Nuclear Information System (INIS)

Abla, G.; Coviello, E.N.; Flanagan, S.M.; Greenwald, M.; Lee, X.; Romosan, A.; Schissel, D.P.; Shoshani, A.; Stillerman, J.; Wright, J.; Wu, K.J.

2016-01-01

Highlights: • Data model, infrastructure, and tools for data tracking, cataloging, and integration. • Automatically document workflow and data provenance in the widest sense. • Fusion Science as test bed but the system’s framework and data model is quite general. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for critical applications. However, it is not the mere existence of data that is important, but our ability to make use of it. Experience has shown that when metadata is better organized and more complete, the underlying data becomes more useful. Traditionally, capturing the steps of scientific workflows and metadata was the role of the lab notebook, but the digital era has resulted instead in the fragmentation of data, processing, and annotation. This paper presents the Metadata, Provenance, and Ontology (MPO) System, the software that can automate the documentation of scientific workflows and associated information. Based on recorded metadata, it provides explicit information about the relationships among the elements of workflows in notebook form augmented with directed acyclic graphs. A set of web-based graphical navigation tools and Application Programming Interface (API) have been created for searching and browsing, as well as programmatically accessing the workflows and data. We describe the MPO concepts and its software architecture. We also report the current status of the software as well as the initial deployment experience.

VLAM-G: Interactive Data Driven Workflow Engine for Grid-Enabled Resources

Directory of Open Access Journals (Sweden)

Vladimir Korkhov

2007-01-01

Full Text Available Grid brings the power of many computers to scientists. However, the development of Grid-enabled applications requires knowledge about Grid infrastructure and low-level API to Grid services. In turn, workflow management systems provide a high-level environment for rapid prototyping of experimental computing systems. Coupling Grid and workflow paradigms is important for the scientific community: it makes the power of the Grid easily available to the end user. The paradigm of data driven workflow execution is one of the ways to enable distributed workflow on the Grid. The work presented in this paper is carried out in the context of the Virtual Laboratory for e-Science project. We present the VLAM-G workflow management system and its core component: the Run-Time System (RTS. The RTS is a dataflow driven workflow engine which utilizes Grid resources, hiding the complexity of the Grid from a scientist. Special attention is paid to the concept of dataflow and direct data streaming between distributed workflow components. We present the architecture and components of the RTS, describe the features of VLAM-G workflow execution, and evaluate the system by performance measurements and a real life use case.

Leveraging the Power of High Performance Computing for Next Generation Sequencing Data Analysis: Tricks and Twists from a High Throughput Exome Workflow

Science.gov (United States)

Wonczak, Stephan; Thiele, Holger; Nieroda, Lech; Jabbari, Kamel; Borowski, Stefan; Sinha, Vishal; Gunia, Wilfried; Lang, Ulrich; Achter, Viktor; Nürnberg, Peter

2015-01-01

Next generation sequencing (NGS) has been a great success and is now a standard method of research in the life sciences. With this technology, dozens of whole genomes or hundreds of exomes can be sequenced in rather short time, producing huge amounts of data. Complex bioinformatics analyses are required to turn these data into scientific findings. In order to run these analyses fast, automated workflows implemented on high performance computers are state of the art. While providing sufficient compute power and storage to meet the NGS data challenge, high performance computing (HPC) systems require special care when utilized for high throughput processing. This is especially true if the HPC system is shared by different users. Here, stability, robustness and maintainability are as important for automated workflows as speed and throughput. To achieve all of these aims, dedicated solutions have to be developed. In this paper, we present the tricks and twists that we utilized in the implementation of our exome data processing workflow. It may serve as a guideline for other high throughput data analysis projects using a similar infrastructure. The code implementing our solutions is provided in the supporting information files. PMID:25942438

CO2 Storage Feasibility: A Workflow for Site Characterisation

Directory of Open Access Journals (Sweden)

Nepveu Manuel

2015-04-01

Full Text Available In this paper, we present an overview of the SiteChar workflow model for site characterisation and assessment for CO2 storage. Site characterisation and assessment is required when permits are requested from the legal authorities in the process of starting a CO2 storage process at a given site. The goal is to assess whether a proposed CO2 storage site can indeed be used for permanent storage while meeting the safety requirements demanded by the European Commission (EC Storage Directive (9, Storage Directive 2009/31/EC. Many issues have to be scrutinised, and the workflow presented here is put forward to help efficiently organise this complex task. Three issues are highlighted: communication within the working team and with the authorities; interdependencies in the workflow and feedback loops; and the risk-based character of the workflow. A general overview (helicopter view of the workflow is given; the issues involved in communication and the risk assessment process are described in more detail. The workflow as described has been tested within the SiteChar project on five potential storage sites throughout Europe. This resulted in a list of key aspects of site characterisation which can help prepare and focus new site characterisation studies.

Distributed Global Transaction Support for Workflow Management Applications

NARCIS (Netherlands)

Vonk, J.; Grefen, P.W.P.J.; Boertjes, E.M.; Apers, Peter M.G.

Workflow management systems require advanced transaction support to cope with their inherently long-running processes. The recent trend to distribute workflow executions requires an even more advanced transaction support system that is able to handle distribution. This paper presents a model as well

Secretome Analysis of Lipid-Induced Insulin Resistance in Skeletal Muscle Cells by a Combined Experimental and Bioinformatics Workflow

DEFF Research Database (Denmark)

Deshmukh, Atul S; Cox, Juergen; Jensen, Lars Juhl

2015-01-01

, in principle, allows an unbiased and comprehensive analysis of cellular secretomes; however, the distinction of bona fide secreted proteins from proteins released upon lysis of a small fraction of dying cells remains challenging. Here we applied highly sensitive MS and streamlined bioinformatics to analyze......-resistant conditions. Our study demonstrates an efficient combined experimental and bioinformatics workflow to identify putative secreted proteins from insulin-resistant skeletal muscle cells, which could easily be adapted to other cellular models....

Workflow improvement and efficiency gain with near digitalization of a Radiology Department

International Nuclear Information System (INIS)

Langen, H.L.; Bielmeier, J.; Selbach, R.; Wittenberg, G.; Feustel, H.

2003-01-01

Purpose: To determine the temporal changes of the workflow caused by digitalization of the radiology department after installation of digital luminescence-radiography (DLR), a radiology information system (RIS) and picture archiving and communication system (PACS) at the Missionsaerztliche Klinik in April 2000. Materials and methods: In a comparative study, a workflow analysis by manual registration of different work steps was performed before (1999) and after (2001) digitalization of a radiology department. Results: The digitalization shortened the examination time for patients from a mean of 8 min to 5 min. The time the patient is absent from the emergency room did not change. Reporting radiographic examinations including comparison with previous studies begins earlier from a mean of 2 h 37 min to 17 min. Using PACS, 85.9% of all cases could be interpreted on the day of the examination (without PACS 41.2%) and 87.2% of the reports were completed the day after the examination (without PACS 64.5%). No time differences were found between reading conventional studies on the monitor or as soft-copy. Conclusion: Compared to conventional film-screen systems, complete digitalization of a radiology department is time saving at nearly all steps of the workflow, with expected positive effects on the workflow quality of the entire hospital. (orig.) [de

Schedule-Aware Workflow Management Systems

Science.gov (United States)

Mans, Ronny S.; Russell, Nick C.; van der Aalst, Wil M. P.; Moleman, Arnold J.; Bakker, Piet J. M.

Contemporary workflow management systems offer work-items to users through specific work-lists. Users select the work-items they will perform without having a specific schedule in mind. However, in many environments work needs to be scheduled and performed at particular times. For example, in hospitals many work-items are linked to appointments, e.g., a doctor cannot perform surgery without reserving an operating theater and making sure that the patient is present. One of the problems when applying workflow technology in such domains is the lack of calendar-based scheduling support. In this paper, we present an approach that supports the seamless integration of unscheduled (flow) and scheduled (schedule) tasks. Using CPN Tools we have developed a specification and simulation model for schedule-aware workflow management systems. Based on this a system has been realized that uses YAWL, Microsoft Exchange Server 2007, Outlook, and a dedicated scheduling service. The approach is illustrated using a real-life case study at the AMC hospital in the Netherlands. In addition, we elaborate on the experiences obtained when developing and implementing a system of this scale using formal techniques.

Building and documenting workflows with python-based snakemake

NARCIS (Netherlands)

J. Köster (Johannes); S. Rahmann (Sven)

2012-01-01

textabstractSnakemake is a novel workflow engine with a simple Python-derived workflow definition language and an optimizing execution environment. It is the first system that supports multiple named wildcards (or variables) in input and output filenames of each rule definition. It also allows to

Support for Taverna workflows in the VPH-Share cloud platform.

Science.gov (United States)

Kasztelnik, Marek; Coto, Ernesto; Bubak, Marian; Malawski, Maciej; Nowakowski, Piotr; Arenas, Juan; Saglimbeni, Alfredo; Testi, Debora; Frangi, Alejandro F

2017-07-01

To address the increasing need for collaborative endeavours within the Virtual Physiological Human (VPH) community, the VPH-Share collaborative cloud platform allows researchers to expose and share sequences of complex biomedical processing tasks in the form of computational workflows. The Taverna Workflow System is a very popular tool for orchestrating complex biomedical & bioinformatics processing tasks in the VPH community. This paper describes the VPH-Share components that support the building and execution of Taverna workflows, and explains how they interact with other VPH-Share components to improve the capabilities of the VPH-Share platform. Taverna workflow support is delivered by the Atmosphere cloud management platform and the VPH-Share Taverna plugin. These components are explained in detail, along with the two main procedures that were developed to enable this seamless integration: workflow composition and execution. 1) Seamless integration of VPH-Share with other components and systems. 2) Extended range of different tools for workflows. 3) Successful integration of scientific workflows from other VPH projects. 4) Execution speed improvement for medical applications. The presented workflow integration provides VPH-Share users with a wide range of different possibilities to compose and execute workflows, such as desktop or online composition, online batch execution, multithreading, remote execution, etc. The specific advantages of each supported tool are presented, as are the roles of Atmosphere and the VPH-Share plugin within the VPH-Share project. The combination of the VPH-Share plugin and Atmosphere engenders the VPH-Share infrastructure with far more flexible, powerful and usable capabilities for the VPH-Share community. As both components can continue to evolve and improve independently, we acknowledge that further improvements are still to be developed and will be described. Copyright © 2017 Elsevier B.V. All rights reserved.

A Metric and Workflow for Quality Control in the Analysis of Heterogeneity in Phenotypic Profiles and Screens

Science.gov (United States)

Gough, Albert; Shun, Tongying; Taylor, D. Lansing; Schurdak, Mark

2016-01-01

Heterogeneity is well recognized as a common property of cellular systems that impacts biomedical research and the development of therapeutics and diagnostics. Several studies have shown that analysis of heterogeneity: gives insight into mechanisms of action of perturbagens; can be used to predict optimal combination therapies; and to quantify heterogeneity in tumors where heterogeneity is believed to be associated with adaptation and resistance. Cytometry methods including high content screening (HCS), high throughput microscopy, flow cytometry, mass spec imaging and digital pathology capture cell level data for populations of cells. However it is often assumed that the population response is normally distributed and therefore that the average adequately describes the results. A deeper understanding of the results of the measurements and more effective comparison of perturbagen effects requires analysis that takes into account the distribution of the measurements, i.e. the heterogeneity. However, the reproducibility of heterogeneous data collected on different days, and in different plates/slides has not previously been evaluated. Here we show that conventional assay quality metrics alone are not adequate for quality control of the heterogeneity in the data. To address this need, we demonstrate the use of the Kolmogorov-Smirnov statistic as a metric for monitoring the reproducibility of heterogeneity in an SAR screen, describe a workflow for quality control in heterogeneity analysis. One major challenge in high throughput biology is the evaluation and interpretation of heterogeneity in thousands of samples, such as compounds in a cell-based screen. In this study we also demonstrate that three heterogeneity indices previously reported, capture the shapes of the distributions and provide a means to filter and browse big data sets of cellular distributions in order to compare and identify distributions of interest. These metrics and methods are presented as a

Logical provenance in data-oriented workflows?

KAUST Repository

Ikeda, R.

2013-04-01

We consider the problem of defining, generating, and tracing provenance in data-oriented workflows, in which input data sets are processed by a graph of transformations to produce output results. We first give a new general definition of provenance for general transformations, introducing the notions of correctness, precision, and minimality. We then determine when properties such as correctness and minimality carry over from the individual transformations\\' provenance to the workflow provenance. We describe a simple logical-provenance specification language consisting of attribute mappings and filters. We provide an algorithm for provenance tracing in workflows where logical provenance for each transformation is specified using our language. We consider logical provenance in the relational setting, observing that for a class of Select-Project-Join (SPJ) transformations, logical provenance specifications encode minimal provenance. We have built a prototype system supporting the features and algorithms presented in the paper, and we report a few preliminary experimental results. © 2013 IEEE.

Impact of CGNS on CFD Workflow

Science.gov (United States)

Poinot, M.; Rumsey, C. L.; Mani, M.

2004-01-01

CFD tools are an integral part of industrial and research processes, for which the amount of data is increasing at a high rate. These data are used in a multi-disciplinary fluid dynamics environment, including structural, thermal, chemical or even electrical topics. We show that the data specification is an important challenge that must be tackled to achieve an efficient workflow for use in this environment. We compare the process with other software techniques, such as network or database type, where past experiences showed how difficult it was to bridge the gap between completely general specifications and dedicated specific applications. We show two aspects of the use of CFD General Notation System (CGNS) that impact CFD workflow: as a data specification framework and as a data storage means. Then, we give examples of projects involving CFD workflows where the use of the CGNS standard leads to a useful method either for data specification, exchange, or storage.

Detecting dissonance in clinical and research workflow for translational psychiatric registries.

Science.gov (United States)

Cofiel, Luciana; Bassi, Débora U; Ray, Ryan Kumar; Pietrobon, Ricardo; Brentani, Helena

2013-01-01

The interplay between the workflow for clinical tasks and research data collection is often overlooked, ultimately making it ineffective. To the best of our knowledge, no previous studies have developed standards that allow for the comparison of workflow models derived from clinical and research tasks toward the improvement of data collection processes. In this study we used the term dissonance for the occurrences where there was a discord between clinical and research workflows. We developed workflow models for a translational research study in psychiatry and the clinic where its data collection was carried out. After identifying points of dissonance between clinical and research models we derived a corresponding classification system that ultimately enabled us to re-engineer the data collection workflow. We considered (1) the number of patients approached for enrollment and (2) the number of patients enrolled in the study as indicators of efficiency in research workflow. We also recorded the number of dissonances before and after the workflow modification. We identified 22 episodes of dissonance across 6 dissonance categories: actor, communication, information, artifact, time, and space. We were able to eliminate 18 episodes of dissonance and increase the number of patients approached and enrolled in research study trough workflow modification. The classification developed in this study is useful for guiding the identification of dissonances and reveal modifications required to align the workflow of data collection and the clinical setting. The methodology described in this study can be used by researchers to standardize data collection process.

Text mining meets workflow: linking U-Compare with Taverna

Science.gov (United States)

Kano, Yoshinobu; Dobson, Paul; Nakanishi, Mio; Tsujii, Jun'ichi; Ananiadou, Sophia

2010-01-01

Summary: Text mining from the biomedical literature is of increasing importance, yet it is not easy for the bioinformatics community to create and run text mining workflows due to the lack of accessibility and interoperability of the text mining resources. The U-Compare system provides a wide range of bio text mining resources in a highly interoperable workflow environment where workflows can very easily be created, executed, evaluated and visualized without coding. We have linked U-Compare to Taverna, a generic workflow system, to expose text mining functionality to the bioinformatics community. Availability: http://u-compare.org/taverna.html, http://u-compare.org Contact: kano@is.s.u-tokyo.ac.jp Supplementary information: Supplementary data are available at Bioinformatics online. PMID:20709690

Distributed execution of aggregated multi domain workflows using an agent framework

NARCIS (Netherlands)

Zhao, Z.; Belloum, A.; de Laat, C.; Adriaans, P.; Hertzberger, B.; Zhang, L.J.; Watson, T.J.; Yang, J.; Hung, P.C.K.

2007-01-01

In e-Science, meaningful experiment processes and workflow engines emerge as important scientific resources. A complex experiment often involves services and processes developed in different scientific domains. Aggregating different workflows into one meta workflow avoids unnecessary rewriting of

Integrating prediction, provenance, and optimization into high energy workflows

Energy Technology Data Exchange (ETDEWEB)

Schram, M.; Bansal, V.; Friese, R. D.; Tallent, N. R.; Yin, J.; Barker, K. J.; Stephan, E.; Halappanavar, M.; Kerbyson, D. J.

2017-10-01

We propose a novel approach for efficient execution of workflows on distributed resources. The key components of this framework include: performance modeling to quantitatively predict workflow component behavior; optimization-based scheduling such as choosing an optimal subset of resources to meet demand and assignment of tasks to resources; distributed I/O optimizations such as prefetching; and provenance methods for collecting performance data. In preliminary results, these techniques improve throughput on a small Belle II workflow by 20%.

Leveraging workflow control patterns in the domain of clinical practice guidelines.

Science.gov (United States)

Kaiser, Katharina; Marcos, Mar

2016-02-10

Clinical practice guidelines (CPGs) include recommendations describing appropriate care for the management of patients with a specific clinical condition. A number of representation languages have been developed to support executable CPGs, with associated authoring/editing tools. Even with tool assistance, authoring of CPG models is a labor-intensive task. We aim at facilitating the early stages of CPG modeling task. In this context, we propose to support the authoring of CPG models based on a set of suitable procedural patterns described in an implementation-independent notation that can be then semi-automatically transformed into one of the alternative executable CPG languages. We have started with the workflow control patterns which have been identified in the fields of workflow systems and business process management. We have analyzed the suitability of these patterns by means of a qualitative analysis of CPG texts. Following our analysis we have implemented a selection of workflow patterns in the Asbru and PROforma CPG languages. As implementation-independent notation for the description of patterns we have chosen BPMN 2.0. Finally, we have developed XSLT transformations to convert the BPMN 2.0 version of the patterns into the Asbru and PROforma languages. We showed that although a significant number of workflow control patterns are suitable to describe CPG procedural knowledge, not all of them are applicable in the context of CPGs due to their focus on single-patient care. Moreover, CPGs may require additional patterns not included in the set of workflow control patterns. We also showed that nearly all the CPG-suitable patterns can be conveniently implemented in the Asbru and PROforma languages. Finally, we demonstrated that individual patterns can be semi-automatically transformed from a process specification in BPMN 2.0 to executable implementations in these languages. We propose a pattern and transformation-based approach for the development of CPG models

The P2P approach to interorganizational workflows

NARCIS (Netherlands)

Aalst, van der W.M.P.; Weske, M.H.; Dittrich, K.R.; Geppert, A.; Norrie, M.C.

2001-01-01

This paper describes in an informal way the Public-To-Private (P2P) approach to interorganizational workflows, which is based on a notion of inheritance. The approach consists of three steps: (1) create a common understanding of the interorganizational workflow by specifying a shared public

Open source workflow : a viable direction for BPM?

NARCIS (Netherlands)

Wohed, P.; Russell, N.C.; Hofstede, ter A.H.M.; Andersson, B.; Aalst, van der W.M.P.; Bellahsène, Z.; Léonard, M.

2008-01-01

With the growing interest in open source software in general and business process management and workflow systems in particular, it is worthwhile investigating the state of open source workflow management. The plethora of these offerings (recent surveys such as [4,6], each contain more than 30 such

Privacy-aware workflow management

NARCIS (Netherlands)

Alhaqbani, B.; Adams, M.; Fidge, C.J.; Hofstede, ter A.H.M.; Glykas, M.

2013-01-01

Information security policies play an important role in achieving information security. Confidentiality, Integrity, and Availability are classic information security goals attained by enforcing appropriate security policies. Workflow Management Systems (WfMSs) also benefit from inclusion of these

Enhanced reproducibility of SADI web service workflows with Galaxy and Docker.

Science.gov (United States)

Aranguren, Mikel Egaña; Wilkinson, Mark D

2015-01-01

Semantic Web technologies have been widely applied in the life sciences, for example by data providers such as OpenLifeData and through web services frameworks such as SADI. The recently reported OpenLifeData2SADI project offers access to the vast OpenLifeData data store through SADI services. This article describes how to merge data retrieved from OpenLifeData2SADI with other SADI services using the Galaxy bioinformatics analysis platform, thus making this semantic data more amenable to complex analyses. This is demonstrated using a working example, which is made distributable and reproducible through a Docker image that includes SADI tools, along with the data and workflows that constitute the demonstration. The combination of Galaxy and Docker offers a solution for faithfully reproducing and sharing complex data retrieval and analysis workflows based on the SADI Semantic web service design patterns.

From Data to Knowledge to Discoveries: Artificial Intelligence and Scientific Workflows

Directory of Open Access Journals (Sweden)

Yolanda Gil

2009-01-01

Full Text Available Scientific computing has entered a new era of scale and sharing with the arrival of cyberinfrastructure facilities for computational experimentation. A key emerging concept is scientific workflows, which provide a declarative representation of complex scientific applications that can be automatically managed and executed in distributed shared resources. In the coming decades, computational experimentation will push the boundaries of current cyberinfrastructure in terms of inter-disciplinary scope and integrative models of scientific phenomena under study. This paper argues that knowledge-rich workflow environments will provide necessary capabilities for that vision by assisting scientists to validate and vet complex analysis processes and by automating important aspects of scientific exploration and discovery.

Principal Component Clustering Approach to Teaching Quality Discriminant Analysis

Science.gov (United States)

Xian, Sidong; Xia, Haibo; Yin, Yubo; Zhai, Zhansheng; Shang, Yan

2016-01-01

Teaching quality is the lifeline of the higher education. Many universities have made some effective achievement about evaluating the teaching quality. In this paper, we establish the Students' evaluation of teaching (SET) discriminant analysis model and algorithm based on principal component clustering analysis. Additionally, we classify the SET…

eMZed: an open source framework in Python for rapid and interactive development of LC/MS data analysis workflows

OpenAIRE

Kiefer, P; Schmitt, U; Vorholt, J A

2013-01-01

Summary: The Python-based, open-source eMZed framework was developed for mass spectrometry (MS) users to create tailored workflows for liquid chromatography (LC)/MS data analysis. The goal was to establish a unique framework with comprehensive basic functionalities that are easy to apply and allow for the extension and modification of the framework in a straightforward manner. eMZed supports the iterative development and prototyping of individual evaluation strategies by providing a computing...

Data intensive ATLAS workflows in the Cloud

CERN Document Server

Rzehorz, Gerhard Ferdinand; The ATLAS collaboration

2016-01-01

This contribution reports on the feasibility of executing data intensive workflows on Cloud infrastructures. In order to assess this, the metric ETC = Events/Time/Cost is formed, which quantifies the different workflow and infrastructure configurations that are tested against each other. In these tests ATLAS reconstruction Jobs are run, examining the effects of overcommitting (more parallel processes running than CPU cores available), scheduling (staggered execution) and scaling (number of cores). The desirability of commissioning storage in the cloud is evaluated, in conjunction with a simple analytical model of the system, and correlated with questions about the network bandwidth, caches and what kind of storage to utilise. In the end a cost/benefit evaluation of different infrastructure configurations and workflows is undertaken, with the goal to find the maximum of the ETC value

Data intensive ATLAS workflows in the Cloud

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00396985; The ATLAS collaboration; Keeble, Oliver; Quadt, Arnulf; Kawamura, Gen

2017-01-01

This contribution reports on the feasibility of executing data intensive workflows on Cloud infrastructures. In order to assess this, the metric ETC = Events/Time/Cost is formed, which quantifies the different workflow and infrastructure configurations that are tested against each other. In these tests ATLAS reconstruction Jobs are run, examining the effects of overcommitting (more parallel processes running than CPU cores available), scheduling (staggered execution) and scaling (number of cores). The desirability of commissioning storage in the Cloud is evaluated, in conjunction with a simple analytical model of the system, and correlated with questions about the network bandwidth, caches and what kind of storage to utilise. In the end a cost/benefit evaluation of different infrastructure configurations and workflows is undertaken, with the goal to find the maximum of the ETC value.

Development of a data independent acquisition mass spectrometry workflow to enable glycopeptide analysis without predefined glycan compositional knowledge.

Science.gov (United States)

Lin, Chi-Hung; Krisp, Christoph; Packer, Nicolle H; Molloy, Mark P

2018-02-10

Glycoproteomics investigates glycan moieties in a site specific manner to reveal the functional roles of protein glycosylation. Identification of glycopeptides from data-dependent acquisition (DDA) relies on high quality MS/MS spectra of glycopeptide precursors and often requires manual validation to ensure confident assignments. In this study, we investigated pseudo-MRM (MRM-HR) and data-independent acquisition (DIA) as alternative acquisition strategies for glycopeptide analysis. These approaches allow data acquisition over the full MS/MS scan range allowing data re-analysis post-acquisition, without data re-acquisition. The advantage of MRM-HR over DDA for N-glycopeptide detection was demonstrated from targeted analysis of bovine fetuin where all three N-glycosylation sites were detected, which was not the case with DDA. To overcome the duty cycle limitation of MRM-HR acquisition needed for analysis of complex samples such as plasma we trialed DIA. This allowed development of a targeted DIA method to identify N-glycopeptides without pre-defined knowledge of the glycan composition, thus providing the potential to identify N-glycopeptides with unexpected structures. This workflow was demonstrated by detection of 59 N-glycosylation sites from 41 glycoproteins from a HILIC enriched human plasma tryptic digest. 21 glycoforms of IgG1 glycopeptides were identified including two truncated structures that are rarely reported. We developed a data-independent mass spectrometry workflow to identify specific glycopeptides from complex biological mixtures. The novelty is that this approach does not require glycan composition to be pre-defined, thereby allowing glycopeptides carrying unexpected glycans to be identified. This is demonstrated through the analysis of immunoglobulins in human plasma where we detected two IgG1 glycoforms that are rarely observed. Copyright © 2017 Elsevier B.V. All rights reserved.

A framework for streamlining research workflow in neuroscience and psychology

Directory of Open Access Journals (Sweden)

Jonas eKubilius

2014-01-01

Full Text Available Successful accumulation of knowledge is critically dependent on the ability to verify and replicate every part of scientific conduct. However, such principles are difficult to enact when researchers continue to resort on ad hoc workflows and with poorly maintained code base. In this paper I examine the needs of neuroscience and psychology community, and introduce psychopy_ext, a unifying framework that seamlessly integrates popular experiment building, analysis and manuscript preparation tools by choosing reasonable defaults and implementing relatively rigid patterns of workflow. This structure allows for automation of multiple tasks, such as generated user interfaces, unit testing, control analyses of stimuli, single-command access to descriptive statistics, and publication quality plotting. Taken together, psychopy_ext opens an exciting possibility for faster, more robust code development and collaboration for researchers.

Semi-Automatic Science Workflow Synthesis for High-End Computing on the NASA Earth Exchange

Data.gov (United States)

National Aeronautics and Space Administration — Enhance capabilities for collaborative data analysis and modeling in Earth sciences. Develop components for automatic workflow capture, archiving and management....

Comparison of SNP-based subtyping workflows for bacterial isolates using WGS data, applied to Salmonella enterica serotype Typhimurium and serotype 1,4,[5],12:i:-

Science.gov (United States)

Saltykova, Assia; Wuyts, Véronique; Mattheus, Wesley; Bertrand, Sophie; Roosens, Nancy H. C.; Marchal, Kathleen

2018-01-01

Whole genome sequencing represents a promising new technology for subtyping of bacterial pathogens. Besides the technological advances which have pushed the approach forward, the last years have been marked by considerable evolution of the whole genome sequencing data analysis methods. Prior to application of the technology as a routine epidemiological typing tool, however, reliable and efficient data analysis strategies need to be identified among the wide variety of the emerged methodologies. In this work, we have compared three existing SNP-based subtyping workflows using a benchmark dataset of 32 Salmonella enterica subsp. enterica serovar Typhimurium and serovar 1,4,[5],12:i:- isolates including five isolates from a confirmed outbreak and three isolates obtained from the same patient at different time points. The analysis was carried out using the original (high-coverage) and a down-sampled (low-coverage) datasets and two different reference genomes. All three tested workflows, namely CSI Phylogeny-based workflow, CFSAN-based workflow and PHEnix-based workflow, were able to correctly group the confirmed outbreak isolates and isolates from the same patient with all combinations of reference genomes and datasets. However, the workflows differed strongly with respect to the SNP distances between isolates and sensitivity towards sequencing coverage, which could be linked to the specific data analysis strategies used therein. To demonstrate the effect of particular data analysis steps, several modifications of the existing workflows were also tested. This allowed us to propose data analysis schemes most suitable for routine SNP-based subtyping applied to S. Typhimurium and S. 1,4,[5],12:i:-. Results presented in this study illustrate the importance of using correct data analysis strategies and to define benchmark and fine-tune parameters applied within routine data analysis pipelines to obtain optimal results. PMID:29408896

Climate Data Analytics Workflow Management

Science.gov (United States)

Zhang, J.; Lee, S.; Pan, L.; Mattmann, C. A.; Lee, T. J.

2016-12-01

In this project we aim to pave a novel path to create a sustainable building block toward Earth science big data analytics and knowledge sharing. Closely studying how Earth scientists conduct data analytics research in their daily work, we have developed a provenance model to record their activities, and to develop a technology to automatically generate workflows for scientists from the provenance. On top of it, we have built the prototype of a data-centric provenance repository, and establish a PDSW (People, Data, Service, Workflow) knowledge network to support workflow recommendation. To ensure the scalability and performance of the expected recommendation system, we have leveraged the Apache OODT system technology. The community-approved, metrics-based performance evaluation web-service will allow a user to select a metric from the list of several community-approved metrics and to evaluate model performance using the metric as well as the reference dataset. This service will facilitate the use of reference datasets that are generated in support of the model-data intercomparison projects such as Obs4MIPs and Ana4MIPs. The data-centric repository infrastructure will allow us to catch richer provenance to further facilitate knowledge sharing and scientific collaboration in the Earth science community. This project is part of Apache incubator CMDA project.

Contract-Based Transaction Management in Cross-Organizational Workflow Management

NARCIS (Netherlands)

Grefen, P.W.P.J.

Cross-organizational workflow management is an essential ingredient for process integration in virtual enterprises. To obtain cross-organizational workflow processes with robust semantics, these processes should be supported by highlevel cross-organizational transaction management. In this context,

Galaxy-M: a Galaxy workflow for processing and analyzing direct infusion and liquid chromatography mass spectrometry-based metabolomics data.

Science.gov (United States)

Davidson, Robert L; Weber, Ralf J M; Liu, Haoyu; Sharma-Oates, Archana; Viant, Mark R

2016-01-01

Metabolomics is increasingly recognized as an invaluable tool in the biological, medical and environmental sciences yet lags behind the methodological maturity of other omics fields. To achieve its full potential, including the integration of multiple omics modalities, the accessibility, standardization and reproducibility of computational metabolomics tools must be improved significantly. Here we present our end-to-end mass spectrometry metabolomics workflow in the widely used platform, Galaxy. Named Galaxy-M, our workflow has been developed for both direct infusion mass spectrometry (DIMS) and liquid chromatography mass spectrometry (LC-MS) metabolomics. The range of tools presented spans from processing of raw data, e.g. peak picking and alignment, through data cleansing, e.g. missing value imputation, to preparation for statistical analysis, e.g. normalization and scaling, and principal components analysis (PCA) with associated statistical evaluation. We demonstrate the ease of using these Galaxy workflows via the analysis of DIMS and LC-MS datasets, and provide PCA scores and associated statistics to help other users to ensure that they can accurately repeat the processing and analysis of these two datasets. Galaxy and data are all provided pre-installed in a virtual machine (VM) that can be downloaded from the GigaDB repository. Additionally, source code, executables and installation instructions are available from GitHub. The Galaxy platform has enabled us to produce an easily accessible and reproducible computational metabolomics workflow. More tools could be added by the community to expand its functionality. We recommend that Galaxy-M workflow files are included within the supplementary information of publications, enabling metabolomics studies to achieve greater reproducibility.

Scheduling Multilevel Deadline-Constrained Scientific Workflows on Clouds Based on Cost Optimization

Directory of Open Access Journals (Sweden)

Maciej Malawski

2015-01-01

Full Text Available This paper presents a cost optimization model for scheduling scientific workflows on IaaS clouds such as Amazon EC2 or RackSpace. We assume multiple IaaS clouds with heterogeneous virtual machine instances, with limited number of instances per cloud and hourly billing. Input and output data are stored on a cloud object store such as Amazon S3. Applications are scientific workflows modeled as DAGs as in the Pegasus Workflow Management System. We assume that tasks in the workflows are grouped into levels of identical tasks. Our model is specified using mathematical programming languages (AMPL and CMPL and allows us to minimize the cost of workflow execution under deadline constraints. We present results obtained using our model and the benchmark workflows representing real scientific applications in a variety of domains. The data used for evaluation come from the synthetic workflows and from general purpose cloud benchmarks, as well as from the data measured in our own experiments with Montage, an astronomical application, executed on Amazon EC2 cloud. We indicate how this model can be used for scenarios that require resource planning for scientific workflows and their ensembles.

Modernizing Earth and Space Science Modeling Workflows in the Big Data Era

Science.gov (United States)

Kinter, J. L.; Feigelson, E.; Walker, R. J.; Tino, C.

2017-12-01

Modeling is a major aspect of the Earth and space science research. The development of numerical models of the Earth system, planetary systems or astrophysical systems is essential to linking theory with observations. Optimal use of observations that are quite expensive to obtain and maintain typically requires data assimilation that involves numerical models. In the Earth sciences, models of the physical climate system are typically used for data assimilation, climate projection, and inter-disciplinary research, spanning applications from analysis of multi-sensor data sets to decision-making in climate-sensitive sectors with applications to ecosystems, hazards, and various biogeochemical processes. In space physics, most models are from first principles, require considerable expertise to run and are frequently modified significantly for each case study. The volume and variety of model output data from modeling Earth and space systems are rapidly increasing and have reached a scale where human interaction with data is prohibitively inefficient. A major barrier to progress is that modeling workflows isn't deemed by practitioners to be a design problem. Existing workflows have been created by a slow accretion of software, typically based on undocumented, inflexible scripts haphazardly modified by a succession of scientists and students not trained in modern software engineering methods. As a result, existing modeling workflows suffer from an inability to onboard new datasets into models; an inability to keep pace with accelerating data production rates; and irreproducibility, among other problems. These factors are creating an untenable situation for those conducting and supporting Earth system and space science. Improving modeling workflows requires investments in hardware, software and human resources. This paper describes the critical path issues that must be targeted to accelerate modeling workflows, including script modularization, parallelization, and

The impact of electronic medical record systems on outpatient workflows: a longitudinal evaluation of its workflow effects.

Science.gov (United States)

Vishwanath, Arun; Singh, Sandeep Rajan; Winkelstein, Peter

2010-11-01

The promise of the electronic medical record (EMR) lies in its ability to reduce the costs of health care delivery and improve the overall quality of care--a promise that is realized through major changes in workflows within the health care organization. Yet little systematic information exists about the workflow effects of EMRs. Moreover, some of the research to-date points to reduced satisfaction among physicians after implementation of the EMR and increased time, i.e., negative workflow effects. A better understanding of the impact of the EMR on workflows is, hence, vital to understanding what the technology really does offer that is new and unique. (i) To empirically develop a physician centric conceptual model of the workflow effects of EMRs; (ii) To use the model to understand the antecedents to the physicians' workflow expectation from the new EMR; (iii) To track physicians' satisfaction overtime, 3 months and 20 months after implementation of the EMR; (iv) To explore the impact of technology learning curves on physicians' reported satisfaction levels. The current research uses the mixed-method technique of concept mapping to empirically develop the conceptual model of an EMR's workflow effects. The model is then used within a controlled study to track physician expectations from a new EMR system as well as their assessments of the EMR's performance 3 months and 20 months after implementation. The research tracks the actual implementation of a new EMR within the outpatient clinics of a large northeastern research hospital. The pre-implementation survey netted 20 physician responses; post-implementation Time 1 survey netted 22 responses, and Time 2 survey netted 26 physician responses. The implementation of the actual EMR served as the intervention. Since the study was conducted within the same setting and tracked a homogenous group of respondents, the overall study design ensured against extraneous influences on the results. Outcome measures were derived

A practical workflow for making anatomical atlases for biological research.

Science.gov (United States)

Wan, Yong; Lewis, A Kelsey; Colasanto, Mary; van Langeveld, Mark; Kardon, Gabrielle; Hansen, Charles

2012-01-01

The anatomical atlas has been at the intersection of science and art for centuries. These atlases are essential to biological research, but high-quality atlases are often scarce. Recent advances in imaging technology have made high-quality 3D atlases possible. However, until now there has been a lack of practical workflows using standard tools to generate atlases from images of biological samples. With certain adaptations, CG artists' workflow and tools, traditionally used in the film industry, are practical for building high-quality biological atlases. Researchers have developed a workflow for generating a 3D anatomical atlas using accessible artists' tools. They used this workflow to build a mouse limb atlas for studying the musculoskeletal system's development. This research aims to raise the awareness of using artists' tools in scientific research and promote interdisciplinary collaborations between artists and scientists. This video (http://youtu.be/g61C-nia9ms) demonstrates a workflow for creating an anatomical atlas.

[Workflow improvement and efficiency gain with near total digitalization of a radiology department].

Science.gov (United States)

Langen, H-L; Bielmeier, J; Wittenberg, G; Selbach, R; Feustel, H

2003-10-01

To determine the temporal changes of the workflow caused by digitalization of the radiology department after installation of digital luminescence-radiography (DLR), a radiology information system (RIS) and picture archiving and communication system (PACS) at the Missionsärztliche Klinik in April 2000. In a comparative study, a workflow analysis by manual registration of different work steps was performed before (1999) and after (2001) digitalization of a radiology department. The digitalization shortened the examination time for patients from a mean of 8 min to 5 min. The time the patient is absent from the emergency room did not change. Reporting radiographic examinations including comparison with previous studies begins earlier from a mean of 2 h 37 min to 17 min. Using PACS, 85.9 % of all cases could be interpreted on the day of the examination (without PACS 41.2 %) and 87.2 % of the reports were completed the day after the examination (without PACS 64.5 %). No time differences were found between reading conventional studies on the monitor or as soft-copy. Compared to conventional film-screen systems, complete digitalization of a radiology department is time saving at nearly all steps of the workflow, with expected positive effects on the workflow quality of the entire hospital.

A Workflow to Improve the Alignment of Prostate Imaging with Whole-mount Histopathology.

Science.gov (United States)

Yamamoto, Hidekazu; Nir, Dror; Vyas, Lona; Chang, Richard T; Popert, Rick; Cahill, Declan; Challacombe, Ben; Dasgupta, Prokar; Chandra, Ashish

2014-08-01

Evaluation of prostate imaging tests against whole-mount histology specimens requires accurate alignment between radiologic and histologic data sets. Misalignment results in false-positive and -negative zones as assessed by imaging. We describe a workflow for three-dimensional alignment of prostate imaging data against whole-mount prostatectomy reference specimens and assess its performance against a standard workflow. Ethical approval was granted. Patients underwent motorized transrectal ultrasound (Prostate Histoscanning) to generate a three-dimensional image of the prostate before radical prostatectomy. The test workflow incorporated steps for axial alignment between imaging and histology, size adjustments following formalin fixation, and use of custom-made parallel cutters and digital caliper instruments. The control workflow comprised freehand cutting and assumed homogeneous block thicknesses at the same relative angles between pathology and imaging sections. Thirty radical prostatectomy specimens were histologically and radiologically processed, either by an alignment-optimized workflow (n = 20) or a control workflow (n = 10). The optimized workflow generated tissue blocks of heterogeneous thicknesses but with no significant drifting in the cutting plane. The control workflow resulted in significantly nonparallel blocks, accurately matching only one out of four histology blocks to their respective imaging data. The image-to-histology alignment accuracy was 20% greater in the optimized workflow (P alignment was observed in the optimized workflow. Evaluation of prostate imaging biomarkers using whole-mount histology references should include a test-to-reference spatial alignment workflow. Copyright © 2014 AUR. Published by Elsevier Inc. All rights reserved.

Workflow management: an overview

NARCIS (Netherlands)

Ouyang, C.; Adams, M.; Wynn, M.T.; Hofstede, ter A.H.M.; Brocke, vom J.; Rosemann, M.

2010-01-01

Workflow management has its origin in the office automation systems of the seventies, but it is not until fairly recently that conceptual and technological breakthroughs have led to its widespread adoption. In fact, nowadays, processawareness has become an accepted and integral part of various types

Integrating the Allen Brain Institute Cell Types Database into Automated Neuroscience Workflow.

Science.gov (United States)

Stockton, David B; Santamaria, Fidel

2017-10-01

We developed software tools to download, extract features, and organize the Cell Types Database from the Allen Brain Institute (ABI) in order to integrate its whole cell patch clamp characterization data into the automated modeling/data analysis cycle. To expand the potential user base we employed both Python and MATLAB. The basic set of tools downloads selected raw data and extracts cell, sweep, and spike features, using ABI's feature extraction code. To facilitate data manipulation we added a tool to build a local specialized database of raw data plus extracted features. Finally, to maximize automation, we extended our NeuroManager workflow automation suite to include these tools plus a separate investigation database. The extended suite allows the user to integrate ABI experimental and modeling data into an automated workflow deployed on heterogeneous computer infrastructures, from local servers, to high performance computing environments, to the cloud. Since our approach is focused on workflow procedures our tools can be modified to interact with the increasing number of neuroscience databases being developed to cover all scales and properties of the nervous system.

A practical data processing workflow for multi-OMICS projects.

Science.gov (United States)

Kohl, Michael; Megger, Dominik A; Trippler, Martin; Meckel, Hagen; Ahrens, Maike; Bracht, Thilo; Weber, Frank; Hoffmann, Andreas-Claudius; Baba, Hideo A; Sitek, Barbara; Schlaak, Jörg F; Meyer, Helmut E; Stephan, Christian; Eisenacher, Martin

2014-01-01

Multi-OMICS approaches aim on the integration of quantitative data obtained for different biological molecules in order to understand their interrelation and the functioning of larger systems. This paper deals with several data integration and data processing issues that frequently occur within this context. To this end, the data processing workflow within the PROFILE project is presented, a multi-OMICS project that aims on identification of novel biomarkers and the development of new therapeutic targets for seven important liver diseases. Furthermore, a software called CrossPlatformCommander is sketched, which facilitates several steps of the proposed workflow in a semi-automatic manner. Application of the software is presented for the detection of novel biomarkers, their ranking and annotation with existing knowledge using the example of corresponding Transcriptomics and Proteomics data sets obtained from patients suffering from hepatocellular carcinoma. Additionally, a linear regression analysis of Transcriptomics vs. Proteomics data is presented and its performance assessed. It was shown, that for capturing profound relations between Transcriptomics and Proteomics data, a simple linear regression analysis is not sufficient and implementation and evaluation of alternative statistical approaches are needed. Additionally, the integration of multivariate variable selection and classification approaches is intended for further development of the software. Although this paper focuses only on the combination of data obtained from quantitative Proteomics and Transcriptomics experiments, several approaches and data integration steps are also applicable for other OMICS technologies. Keeping specific restrictions in mind the suggested workflow (or at least parts of it) may be used as a template for similar projects that make use of different high throughput techniques. This article is part of a Special Issue entitled: Computational Proteomics in the Post

A history-tracing XML-based provenance framework for workflows

NARCIS (Netherlands)

Gerhards, M; Belloum, A.; Berretz, F.; Sander, V.; Skorupa, S.

2010-01-01

The importance of validating and reproducing the outcome of computational processes is fundamental to many application domains. Assuring the provenance of workflows will likely become even more important with respect to the incorporation of human tasks to standard workflows by emerging standards

Conceptual framework and architecture for service mediating workflow management

NARCIS (Netherlands)

Hu, Jinmin; Grefen, P.W.P.J.

2003-01-01

This paper proposes a three-layer workflow concept framework to realize workflow enactment flexibility by dynamically binding activities to their implementations at run time. A service mediating layer is added to bridge business process definition and its implementation. Based on this framework, we

From remote sensing data about information extraction for 3D geovisualization - Development of a workflow

International Nuclear Information System (INIS)

Tiede, D.

2010-01-01

With an increased availability of high (spatial) resolution remote sensing imagery since the late nineties, the need to develop operative workflows for the automated extraction, provision and communication of information from such data has grown. Monitoring requirements, aimed at the implementation of environmental or conservation targets, management of (environmental-) resources, and regional planning as well as international initiatives, especially the joint initiative of the European Commission and ESA (European Space Agency) for Global Monitoring for Environment and Security (GMES) play also a major part. This thesis addresses the development of an integrated workflow for the automated provision of information derived from remote sensing data. Considering applied data and fields of application, this work aims to design the workflow as generic as possible. Following research questions are discussed: What are the requirements of a workflow architecture that seamlessly links the individual workflow elements in a timely manner and secures accuracy of the extracted information effectively? How can the workflow retain its efficiency if mounds of data are processed? How can the workflow be improved with regards to automated object-based image analysis (OBIA)? Which recent developments could be of use? What are the limitations or which workarounds could be applied in order to generate relevant results? How can relevant information be prepared target-oriented and communicated effectively? How can the more recently developed freely available virtual globes be used for the delivery of conditioned information under consideration of the third dimension as an additional, explicit carrier of information? Based on case studies comprising different data sets and fields of application it is demonstrated how methods to extract and process information as well as to effectively communicate results can be improved and successfully combined within one workflow. It is shown that (1

A lightweight messaging-based distributed processing and workflow execution framework for real-time and big data analysis

Science.gov (United States)

Laban, Shaban; El-Desouky, Aly

2014-05-01

To achieve a rapid, simple and reliable parallel processing of different types of tasks and big data processing on any compute cluster, a lightweight messaging-based distributed applications processing and workflow execution framework model is proposed. The framework is based on Apache ActiveMQ and Simple (or Streaming) Text Oriented Message Protocol (STOMP). ActiveMQ , a popular and powerful open source persistence messaging and integration patterns server with scheduler capabilities, acts as a message broker in the framework. STOMP provides an interoperable wire format that allows framework programs to talk and interact between each other and ActiveMQ easily. In order to efficiently use the message broker a unified message and topic naming pattern is utilized to achieve the required operation. Only three Python programs and simple library, used to unify and simplify the implementation of activeMQ and STOMP protocol, are needed to use the framework. A watchdog program is used to monitor, remove, add, start and stop any machine and/or its different tasks when necessary. For every machine a dedicated one and only one zoo keeper program is used to start different functions or tasks, stompShell program, needed for executing the user required workflow. The stompShell instances are used to execute any workflow jobs based on received message. A well-defined, simple and flexible message structure, based on JavaScript Object Notation (JSON), is used to build any complex workflow systems. Also, JSON format is used in configuration, communication between machines and programs. The framework is platform independent. Although, the framework is built using Python the actual workflow programs or jobs can be implemented by any programming language. The generic framework can be used in small national data centres for processing seismological and radionuclide data received from the International Data Centre (IDC) of the Preparatory Commission for the Comprehensive Nuclear

Parametric Room Acoustic Workflows

DEFF Research Database (Denmark)

Parigi, Dario; Svidt, Kjeld; Molin, Erik

2017-01-01

The paper investigates and assesses different room acoustics software and the opportunities they offer to engage in parametric acoustics workflow and to influence architectural designs. The first step consists in the testing and benchmarking of different tools on the basis of accuracy, speed...... and interoperability with Grasshopper 3d. The focus will be placed to the benchmarking of three different acoustic analysis tools based on raytracing. To compare the accuracy and speed of the acoustic evaluation across different tools, a homogeneous set of acoustic parameters is chosen. The room acoustics parameters...... included in the set are reverberation time (EDT, RT30), clarity (C50), loudness (G), and definition (D50). Scenarios are discussed for determining at different design stages the most suitable acoustic tool. Those scenarios are characterized, by the use of less accurate but fast evaluation tools to be used...

Teaching with Stereoscopic Video: Opportunities and Challenges

Science.gov (United States)

Variano, Evan

2017-11-01

I will present my work on creating stereoscopic videos for fluid pedagogy. I discuss a variety of workflows for content creation and a variety of platforms for content delivery. I review the qualitative lessons learned when teaching with this material, and discuss outlook for the future. This work was partially supported by the NSF award ENG-1604026 and the UC Berkeley Student Technology Fund.

LQCD workflow execution framework: Models, provenance and fault-tolerance

International Nuclear Information System (INIS)

Piccoli, Luciano; Simone, James N; Kowalkowlski, James B; Dubey, Abhishek

2010-01-01

Large computing clusters used for scientific processing suffer from systemic failures when operated over long continuous periods for executing workflows. Diagnosing job problems and faults leading to eventual failures in this complex environment is difficult, specifically when the success of an entire workflow might be affected by a single job failure. In this paper, we introduce a model-based, hierarchical, reliable execution framework that encompass workflow specification, data provenance, execution tracking and online monitoring of each workflow task, also referred to as participants. The sequence of participants is described in an abstract parameterized view, which is translated into a concrete data dependency based sequence of participants with defined arguments. As participants belonging to a workflow are mapped onto machines and executed, periodic and on-demand monitoring of vital health parameters on allocated nodes is enabled according to pre-specified rules. These rules specify conditions that must be true pre-execution, during execution and post-execution. Monitoring information for each participant is propagated upwards through the reflex and healing architecture, which consists of a hierarchical network of decentralized fault management entities, called reflex engines. They are instantiated as state machines or timed automatons that change state and initiate reflexive mitigation action(s) upon occurrence of certain faults. We describe how this cluster reliability framework is combined with the workflow execution framework using formal rules and actions specified within a structure of first order predicate logic that enables a dynamic management design that reduces manual administrative workload, and increases cluster-productivity.

Multidetector-row helical CT: analysis of time management and workflow

Energy Technology Data Exchange (ETDEWEB)

Roos, Justus E.; Desbiolles, Lotus M.; Willmann, Juergen K.; Weishaupt, Dominik; Marincek, Borut; Hilfiker, Paul R. [Institute of Diagnostic Radiology, University Hospital Zurich (Switzerland)

2002-03-01

The purpose of this study was to evaluate time management and workflow for multidetector-row helical CT (MDCT). Time for patient and data handling of at total of 580 patients were evaluated at two different time periods (December 1999, August 2000), each for the following baseline measurements: (a) change of clothes/instruction; (b) patient placement on the CT table/i.v. catheter; (c) CT planning and programming; (d) CT data acquisition; (e) CT data reconstruction; (f) CT data storage/printing. All imaging was performed on a Somatom Volume Zoom (Siemens, Erlangen, Germany). Time measurements summarized for different CT protocols revealed the following: (a) 5:01 min ({+-}2.06 min); (b) 4:36 min ({+-}2.43 min); (c) 4:11 min ({+-}2.55 min); (d) 0:43 min ({+-}0.15 min); (e) 6:59 min ({+-}2.39 min); (f) 09:51 min ({+-}3.51 min). Planning and programming was most time-consuming for CT angiography, whereas chest and abdominal CT needed only 3:26 and 3:30 min, respectively. Reconstruction time was highest for HRCT (9:22 min) and CTA (9:03 min). Data storage/printing was most time-consuming for HRCT (13:02 min), followed by combined neck-chest-abdomen examinations (12:19 min). Comparing the two time periods, during which a software update was performed, a mean time reduction of 4:31 min per patient (15%, p<0.001) was achieved. Whereas CT data acquisition time is no longer a problem with MDCT, patient management, data reconstruction, and data storage are the most time-consuming parts. Well-trained technicians, state-of-the-art workstations, and fast networking are the most important factors to improve workflow. (orig.)

Parallel and Efficient Sensitivity Analysis of Microscopy Image Segmentation Workflows in Hybrid Systems.

Science.gov (United States)

Barreiros, Willian; Teodoro, George; Kurc, Tahsin; Kong, Jun; Melo, Alba C M A; Saltz, Joel

2017-09-01

We investigate efficient sensitivity analysis (SA) of algorithms that segment and classify image features in a large dataset of high-resolution images. Algorithm SA is the process of evaluating variations of methods and parameter values to quantify differences in the output. A SA can be very compute demanding because it requires re-processing the input dataset several times with different parameters to assess variations in output. In this work, we introduce strategies to efficiently speed up SA via runtime optimizations targeting distributed hybrid systems and reuse of computations from runs with different parameters. We evaluate our approach using a cancer image analysis workflow on a hybrid cluster with 256 nodes, each with an Intel Phi and a dual socket CPU. The SA attained a parallel efficiency of over 90% on 256 nodes. The cooperative execution using the CPUs and the Phi available in each node with smart task assignment strategies resulted in an additional speedup of about 2×. Finally, multi-level computation reuse lead to an additional speedup of up to 2.46× on the parallel version. The level of performance attained with the proposed optimizations will allow the use of SA in large-scale studies.

Workflow automation based on OSI job transfer and manipulation

NARCIS (Netherlands)

van Sinderen, Marten J.; Joosten, Stef M.M.; Guareis de farias, Cléver

1999-01-01

This paper shows that Workflow Management Systems (WFMS) and a data communication standard called Job Transfer and Manipulation (JTM) are built on the same concepts, even though different words are used. The paper analyses the correspondence of workflow concepts and JTM concepts. Besides, the

Optimizing a massive parallel sequencing workflow for quantitative miRNA expression analysis.

Directory of Open Access Journals (Sweden)

Francesca Cordero

Full Text Available BACKGROUND: Massive Parallel Sequencing methods (MPS can extend and improve the knowledge obtained by conventional microarray technology, both for mRNAs and short non-coding RNAs, e.g. miRNAs. The processing methods used to extract and interpret the information are an important aspect of dealing with the vast amounts of data generated from short read sequencing. Although the number of computational tools for MPS data analysis is constantly growing, their strengths and weaknesses as part of a complex analytical pipe-line have not yet been well investigated. PRIMARY FINDINGS: A benchmark MPS miRNA dataset, resembling a situation in which miRNAs are spiked in biological replication experiments was assembled by merging a publicly available MPS spike-in miRNAs data set with MPS data derived from healthy donor peripheral blood mononuclear cells. Using this data set we observed that short reads counts estimation is strongly under estimated in case of duplicates miRNAs, if whole genome is used as reference. Furthermore, the sensitivity of miRNAs detection is strongly dependent by the primary tool used in the analysis. Within the six aligners tested, specifically devoted to miRNA detection, SHRiMP and MicroRazerS show the highest sensitivity. Differential expression estimation is quite efficient. Within the five tools investigated, two of them (DESseq, baySeq show a very good specificity and sensitivity in the detection of differential expression. CONCLUSIONS: The results provided by our analysis allow the definition of a clear and simple analytical optimized workflow for miRNAs digital quantitative analysis.

Optimizing a massive parallel sequencing workflow for quantitative miRNA expression analysis.

Science.gov (United States)

Cordero, Francesca; Beccuti, Marco; Arigoni, Maddalena; Donatelli, Susanna; Calogero, Raffaele A

2012-01-01

Massive Parallel Sequencing methods (MPS) can extend and improve the knowledge obtained by conventional microarray technology, both for mRNAs and short non-coding RNAs, e.g. miRNAs. The processing methods used to extract and interpret the information are an important aspect of dealing with the vast amounts of data generated from short read sequencing. Although the number of computational tools for MPS data analysis is constantly growing, their strengths and weaknesses as part of a complex analytical pipe-line have not yet been well investigated. A benchmark MPS miRNA dataset, resembling a situation in which miRNAs are spiked in biological replication experiments was assembled by merging a publicly available MPS spike-in miRNAs data set with MPS data derived from healthy donor peripheral blood mononuclear cells. Using this data set we observed that short reads counts estimation is strongly under estimated in case of duplicates miRNAs, if whole genome is used as reference. Furthermore, the sensitivity of miRNAs detection is strongly dependent by the primary tool used in the analysis. Within the six aligners tested, specifically devoted to miRNA detection, SHRiMP and MicroRazerS show the highest sensitivity. Differential expression estimation is quite efficient. Within the five tools investigated, two of them (DESseq, baySeq) show a very good specificity and sensitivity in the detection of differential expression. The results provided by our analysis allow the definition of a clear and simple analytical optimized workflow for miRNAs digital quantitative analysis.

On Secure Workflow Decentralisation on the Internet

Directory of Open Access Journals (Sweden)

Petteri Kaskenpalo

2010-06-01

Full Text Available Decentralised workflow management systems are a new research area, where most work to-date has focused on the system's overall architecture. As little attention has been given to the security aspects in such systems, we follow a security driven approach, and consider, from the perspective of available security building blocks, how security can be implemented and what new opportunities are presented when empowering the decentralised environment with modern distributed security protocols. Our research is motivated by a more general question of how to combine the positive enablers that email exchange enjoys, with the general benefits of workflow systems, and more specifically with the benefits that can be introduced in a decentralised environment. This aims to equip email users with a set of tools to manage the semantics of a message exchange, contents, participants and their roles in the exchange in an environment that provides inherent assurances of security and privacy. This work is based on a survey of contemporary distributed security protocols, and considers how these protocols could be used in implementing a distributed workflow management system with decentralised control . We review a set of these protocols, focusing on the required message sequences in reviewing the protocols, and discuss how these security protocols provide the foundations for implementing core control-flow, data, and resource patterns in a distributed workflow environment.

A STRUCTURAL MODEL OF AN EXCAVATOR WORKFLOW CONTROL SYSTEM

Directory of Open Access Journals (Sweden)

A. Gurko

2016-12-01

Full Text Available Earthwork improving is connected with excavators automation. In this paper, on the basis of the analysis of problems that a hydraulic excavator control system have to solve, the hierarchical structure of a control system have been proposed. The decomposition of the control process had been executed that allowed to develop the structural model which reflects the characteristics of a multilevel space-distributed control system of an excavator workflow.

Integrate Data into Scientific Workflows for Terrestrial Biosphere Model Evaluation through Brokers

Science.gov (United States)

Wei, Y.; Cook, R. B.; Du, F.; Dasgupta, A.; Poco, J.; Huntzinger, D. N.; Schwalm, C. R.; Boldrini, E.; Santoro, M.; Pearlman, J.; Pearlman, F.; Nativi, S.; Khalsa, S.

2013-12-01

Terrestrial biosphere models (TBMs) have become integral tools for extrapolating local observations and process-level understanding of land-atmosphere carbon exchange to larger regions. Model-model and model-observation intercomparisons are critical to understand the uncertainties within model outputs, to improve model skill, and to improve our understanding of land-atmosphere carbon exchange. The DataONE Exploration, Visualization, and Analysis (EVA) working group is evaluating TBMs using scientific workflows in UV-CDAT/VisTrails. This workflow-based approach promotes collaboration and improved tracking of evaluation provenance. But challenges still remain. The multi-scale and multi-discipline nature of TBMs makes it necessary to include diverse and distributed data resources in model evaluation. These include, among others, remote sensing data from NASA, flux tower observations from various organizations including DOE, and inventory data from US Forest Service. A key challenge is to make heterogeneous data from different organizations and disciplines discoverable and readily integrated for use in scientific workflows. This presentation introduces the brokering approach taken by the DataONE EVA to fill the gap between TBMs' evaluation scientific workflows and cross-organization and cross-discipline data resources. The DataONE EVA started the development of an Integrated Model Intercomparison Framework (IMIF) that leverages standards-based discovery and access brokers to dynamically discover, access, and transform (e.g. subset and resampling) diverse data products from DataONE, Earth System Grid (ESG), and other data repositories into a format that can be readily used by scientific workflows in UV-CDAT/VisTrails. The discovery and access brokers serve as an independent middleware that bridge existing data repositories and TBMs evaluation scientific workflows but introduce little overhead to either component. In the initial work, an OpenSearch-based discovery broker

"Intelligent" tools for workflow process redesign : a research agenda

NARCIS (Netherlands)

Netjes, M.; Vanderfeesten, I.T.P.; Reijers, H.A.; Bussler, C.; Haller, A.

2006-01-01

Although much attention is being paid to business processes during the past decades, the design of business processes and particularly workflow processes is still more art than science. In this workshop paper, we present our view on modeling methods for workflow processes and introduce our research

When Workflow Management Systems and Logging Systems Meet: Analyzing Large-Scale Execution Traces

Energy Technology Data Exchange (ETDEWEB)

Gunter, Daniel

2008-07-31

This poster shows the benefits of integrating a workflow management system with logging and log mining capabilities. By combing two existing, mature technologies: Pegasus-WMS and Netlogger, we are able to efficiently process execution logs of earthquake science workflows consisting of hundreds of thousands to one million tasks. In particular we show results of processing logs of CyberShake, a workflow application running on the TeraGrid. Client-side tools allow scientists to quickly gather statistics about a workflow run and find out which tasks executed, where they were executed, what was their runtime, etc. These statistics can be used to understand the performance characteristics of a workflow and help tune the execution parameters of the workflow management system. This poster shows the scalability of the system presenting results of uploading task execution records into the system and by showing results of querying the system for overall workflow performance information.

Data intensive ATLAS workflows in the Cloud

CERN Document Server

Rzehorz, Gerhard Ferdinand; The ATLAS collaboration

2018-01-01

From 2025 onwards, the ATLAS collaboration at the Large Hadron Collider (LHC) at CERN will experience a massive increase in data quantity as well as complexity. Including mitigating factors, the prevalent computing power by that time will only fulfil one tenth of the requirement. This contribution will focus on Cloud computing as an approach to help overcome this challenge by providing flexible hardware that can be configured to the specific needs of a workflow. Experience with Cloud computing exists, but there is a large uncertainty if and to which degree it can be able to reduce the burden by 2025. In order to understand and quantify the benefits of Cloud computing, the "Workflow and Infrastructure Model" was created. It estimates the viability of Cloud computing by combining different inputs from the workflow side with infrastructure specifications. The model delivers metrics that enable the comparison of different Cloud configurations as well as different Cloud offerings with each other. A wide range of r...

Elastic Scheduling of Scientific Workflows under Deadline Constraints in Cloud Computing Environments

Directory of Open Access Journals (Sweden)

Nazia Anwar

2018-01-01

Full Text Available Scientific workflow applications are collections of several structured activities and fine-grained computational tasks. Scientific workflow scheduling in cloud computing is a challenging research topic due to its distinctive features. In cloud environments, it has become critical to perform efficient task scheduling resulting in reduced scheduling overhead, minimized cost and maximized resource utilization while still meeting the user-specified overall deadline. This paper proposes a strategy, Dynamic Scheduling of Bag of Tasks based workflows (DSB, for scheduling scientific workflows with the aim to minimize financial cost of leasing Virtual Machines (VMs under a user-defined deadline constraint. The proposed model groups the workflow into Bag of Tasks (BoTs based on data dependency and priority constraints and thereafter optimizes the allocation and scheduling of BoTs on elastic, heterogeneous and dynamically provisioned cloud resources called VMs in order to attain the proposed method’s objectives. The proposed approach considers pay-as-you-go Infrastructure as a Service (IaaS clouds having inherent features such as elasticity, abundance, heterogeneity and VM provisioning delays. A trace-based simulation using benchmark scientific workflows representing real world applications, demonstrates a significant reduction in workflow computation cost while the workflow deadline is met. The results validate that the proposed model produces better success rates to meet deadlines and cost efficiencies in comparison to adapted state-of-the-art algorithms for similar problems.

Developing a workflow to identify inconsistencies in volunteered geographic information: a phenological case study

Science.gov (United States)

Mehdipoor, Hamed; Zurita-Milla, Raul; Rosemartin, Alyssa; Gerst, Katharine L.; Weltzin, Jake F.

2015-01-01

Recent improvements in online information communication and mobile location-aware technologies have led to the production of large volumes of volunteered geographic information. Widespread, large-scale efforts by volunteers to collect data can inform and drive scientific advances in diverse fields, including ecology and climatology. Traditional workflows to check the quality of such volunteered information can be costly and time consuming as they heavily rely on human interventions. However, identifying factors that can influence data quality, such as inconsistency, is crucial when these data are used in modeling and decision-making frameworks. Recently developed workflows use simple statistical approaches that assume that the majority of the information is consistent. However, this assumption is not generalizable, and ignores underlying geographic and environmental contextual variability that may explain apparent inconsistencies. Here we describe an automated workflow to check inconsistency based on the availability of contextual environmental information for sampling locations. The workflow consists of three steps: (1) dimensionality reduction to facilitate further analysis and interpretation of results, (2) model-based clustering to group observations according to their contextual conditions, and (3) identification of inconsistent observations within each cluster. The workflow was applied to volunteered observations of flowering in common and cloned lilac plants (Syringa vulgaris and Syringa x chinensis) in the United States for the period 1980 to 2013. About 97% of the observations for both common and cloned lilacs were flagged as consistent, indicating that volunteers provided reliable information for this case study. Relative to the original dataset, the exclusion of inconsistent observations changed the apparent rate of change in lilac bloom dates by two days per decade, indicating the importance of inconsistency checking as a key step in data quality

Developing a Workflow to Identify Inconsistencies in Volunteered Geographic Information: A Phenological Case Study.

Science.gov (United States)

Mehdipoor, Hamed; Zurita-Milla, Raul; Rosemartin, Alyssa; Gerst, Katharine L; Weltzin, Jake F

2015-01-01

Recent improvements in online information communication and mobile location-aware technologies have led to the production of large volumes of volunteered geographic information. Widespread, large-scale efforts by volunteers to collect data can inform and drive scientific advances in diverse fields, including ecology and climatology. Traditional workflows to check the quality of such volunteered information can be costly and time consuming as they heavily rely on human interventions. However, identifying factors that can influence data quality, such as inconsistency, is crucial when these data are used in modeling and decision-making frameworks. Recently developed workflows use simple statistical approaches that assume that the majority of the information is consistent. However, this assumption is not generalizable, and ignores underlying geographic and environmental contextual variability that may explain apparent inconsistencies. Here we describe an automated workflow to check inconsistency based on the availability of contextual environmental information for sampling locations. The workflow consists of three steps: (1) dimensionality reduction to facilitate further analysis and interpretation of results, (2) model-based clustering to group observations according to their contextual conditions, and (3) identification of inconsistent observations within each cluster. The workflow was applied to volunteered observations of flowering in common and cloned lilac plants (Syringa vulgaris and Syringa x chinensis) in the United States for the period 1980 to 2013. About 97% of the observations for both common and cloned lilacs were flagged as consistent, indicating that volunteers provided reliable information for this case study. Relative to the original dataset, the exclusion of inconsistent observations changed the apparent rate of change in lilac bloom dates by two days per decade, indicating the importance of inconsistency checking as a key step in data quality

Declarative Event-Based Workflow as Distributed Dynamic Condition Response Graphs

DEFF Research Database (Denmark)

Hildebrandt, Thomas; Mukkamala, Raghava Rao

2010-01-01

We present Dynamic Condition Response Graphs (DCR Graphs) as a declarative, event-based process model inspired by the workflow language employed by our industrial partner and conservatively generalizing prime event structures. A dynamic condition response graph is a directed graph with nodes repr...... exemplify the use of distributed DCR Graphs on a simple workflow taken from a field study at a Danish hospital, pointing out their flexibility compared to imperative workflow models. Finally we provide a mapping from DCR Graphs to Buchi-automata....

Design decisions in workflow management and quality of work.

NARCIS (Netherlands)

Waal, B.M.E. de; Batenburg, R.

2009-01-01

In this paper, the design and implementation of a workflow management (WFM) system in a large Dutch social insurance organisation is described. The effect of workflow design decisions on the quality of work is explored theoretically and empirically, using the model of Zur Mühlen as a frame of

Automated evolutionary restructuring of workflows to minimise errors via stochastic model checking

DEFF Research Database (Denmark)

Herbert, Luke Thomas; Hansen, Zaza Nadja Lee; Jacobsen, Peter

2014-01-01

This paper presents a framework for the automated restructuring of workflows that allows one to minimise the impact of errors on a production workflow. The framework allows for the modelling of workflows by means of a formalised subset of the Business Process Modelling and Notation (BPMN) language...

Incorporating Workflow Interference in Facility Layout Design: The Quartic Assignment Problem

OpenAIRE

Wen-Chyuan Chiang; Panagiotis Kouvelis; Timothy L. Urban

2002-01-01

Although many authors have noted the importance of minimizing workflow interference in facility layout design, traditional layout research tends to focus on minimizing the distance-based transportation cost. This paper formalizes the concept of workflow interference from a facility layout perspective. A model, formulated as a quartic assignment problem, is developed that explicitly considers the interference of workflow. Optimal and heuristic solution methodologies are developed and evaluated.

Provenance-Based Debugging and Drill-Down in Data-Oriented Workflows

KAUST Repository

Ikeda, Robert; Cho, Junsang; Fang, Charlie; Salihoglu, Semih; Torikai, Satoshi; Widom, Jennifer

2012-01-01

Panda (for Provenance and Data) is a system that supports the creation and execution of data-oriented workflows, with automatic provenance generation and built-in provenance tracing operations. Workflows in Panda are arbitrary a cyclic graphs

Hermes: Seamless delivery of containerized bioinformatics workflows in hybrid cloud (HTC) environments

Science.gov (United States)

Kintsakis, Athanassios M.; Psomopoulos, Fotis E.; Symeonidis, Andreas L.; Mitkas, Pericles A.

Hermes introduces a new "describe once, run anywhere" paradigm for the execution of bioinformatics workflows in hybrid cloud environments. It combines the traditional features of parallelization-enabled workflow management systems and of distributed computing platforms in a container-based approach. It offers seamless deployment, overcoming the burden of setting up and configuring the software and network requirements. Most importantly, Hermes fosters the reproducibility of scientific workflows by supporting standardization of the software execution environment, thus leading to consistent scientific workflow results and accelerating scientific output.

High performance workflow implementation for protein surface characterization using grid technology

Directory of Open Access Journals (Sweden)

Clematis Andrea

2005-12-01

Full Text Available Abstract Background This study concerns the development of a high performance workflow that, using grid technology, correlates different kinds of Bioinformatics data, starting from the base pairs of the nucleotide sequence to the exposed residues of the protein surface. The implementation of this workflow is based on the Italian Grid.it project infrastructure, that is a network of several computational resources and storage facilities distributed at different grid sites. Methods Workflows are very common in Bioinformatics because they allow to process large quantities of data by delegating the management of resources to the information streaming. Grid technology optimizes the computational load during the different workflow steps, dividing the more expensive tasks into a set of small jobs. Results Grid technology allows efficient database management, a crucial problem for obtaining good results in Bioinformatics applications. The proposed workflow is implemented to integrate huge amounts of data and the results themselves must be stored into a relational database, which results as the added value to the global knowledge. Conclusion A web interface has been developed to make this technology accessible to grid users. Once the workflow has started, by means of the simplified interface, it is possible to follow all the different steps throughout the data processing. Eventually, when the workflow has been terminated, the different features of the protein, like the amino acids exposed on the protein surface, can be compared with the data present in the output database.

DataSpaces: An Interaction and Coordination Framework for Coupled Simulation Workflows

International Nuclear Information System (INIS)

Docan, Ciprian; Klasky, Scott A.; Parashar, Manish

2010-01-01

Emerging high-performance distributed computing environments are enabling new end-to-end formulations in science and engineering that involve multiple interacting processes and data-intensive application workflows. For example, current fusion simulation efforts are exploring coupled models and codes that simultaneously simulate separate application processes, such as the core and the edge turbulence, and run on different high performance computing resources. These components need to interact, at runtime, with each other and with services for data monitoring, data analysis and visualization, and data archiving. As a result, they require efficient support for dynamic and flexible couplings and interactions, which remains a challenge. This paper presents Data-Spaces, a flexible interaction and coordination substrate that addresses this challenge. DataSpaces essentially implements a semantically specialized virtual shared space abstraction that can be associatively accessed by all components and services in the application workflow. It enables live data to be extracted from running simulation components, indexes this data online, and then allows it to be monitored, queried and accessed by other components and services via the space using semantically meaningful operators. The underlying data transport is asynchronous, low-overhead and largely memory-to-memory. The design, implementation, and experimental evaluation of DataSpaces using a coupled fusion simulation workflow is presented.

A Collaborative Workflow for the Digitization of Unique Materials

Science.gov (United States)

Gueguen, Gretchen; Hanlon, Ann M.

2009-01-01

This paper examines the experience of one institution, the University of Maryland Libraries, as it made organizational efforts to harness existing workflows and to capture digitization done in the course of responding to patron requests. By examining the way this organization adjusted its existing workflows to put in place more systematic methods…

Restructuring of workflows to minimise errors via stochastic model checking: An automated evolutionary approach

International Nuclear Information System (INIS)

Herbert, L.T.; Hansen, Z.N.L.

2016-01-01

This paper presents a framework for the automated restructuring of stochastic workflows to reduce the impact of faults. The framework allows for the modelling of workflows by means of a formalised subset of the BPMN workflow language. We extend this modelling formalism to describe faults and incorporate an intention preserving stochastic semantics able to model both probabilistic- and non-deterministic behaviour. Stochastic model checking techniques are employed to generate the state-space of a given workflow. Possible improvements obtained by restructuring are measured by employing the framework's capacity for tracking real-valued quantities associated with states and transitions of the workflow. The space of possible restructurings of a workflow is explored by means of an evolutionary algorithm, where the goals for improvement are defined in terms of optimising quantities, typically employed to model resources, associated with a workflow. The approach is fully automated and only the modelling of the production workflows, potential faults and the expression of the goals require manual input. We present the design of a software tool implementing this framework and explore the practical utility of this approach through an industrial case study in which the risk of production failures and their impact are reduced by restructuring the workflow. - Highlights: • We present a framework which allows for the automated restructuring of workflows. • This framework seeks to minimise the impact of errors on the workflow. • We illustrate a scalable software implementation of this framework. • We explore the practical utility of this approach through an industry case. • The impact of errors can be substantially reduced by restructuring the workflow.

How does peer teaching compare to faculty teaching? A systematic review and meta-analysis (.).

Science.gov (United States)

Rees, Eliot L; Quinn, Patrick J; Davies, Benjamin; Fotheringham, Victoria

2016-08-01

In undergraduate medical education, peer-teaching has become an established and common method to enhance student learning. Evidence suggests that peer-teaching provides learning benefits for both learners and tutors. We aimed to describe the outcomes for medical students taught by peers through systematic review and meta-analysis of existing literature. Seven databases were searched through 21 terms and their Boolean combinations. Studies reporting knowledge or skills outcomes of students taught by peers compared to those taught by faculty or qualified clinicians were included. Extracted data on students' knowledge and skills outcomes were synthesised through a random effects model meta-analysis. The search yielded 2292 studies. Five hundred and fifty-three duplicates and 1611 irrelevant articles were removed during title-screening. The abstracts of 128 papers were screened against the inclusion and exclusion criteria. Ten studies have been included in the review. Meta-analyses showed no significant difference in peer-teaching compared to faculty teaching for knowledge or skills outcomes, standardised mean differences were 0.07 (95% CI: -0.07, 0.21) and 0.11 (95% CI: -0.07, 1.29), respectively. Students taught by peers do not have significantly different outcomes to those taught by faculty. As the process of teaching helps to develop both tutor knowledge and teaching skills, peer-teaching should be supported.

A Prudent Approach to Fair Use Workflow

Directory of Open Access Journals (Sweden)

Karey Patterson

2018-02-01

Full Text Available This poster will outline a new highly efficient workflow for the management of copyright materials that is prudent and accommodates generally and legally accepted Fair Use limits. The workflow allows library or copyright staff an easy means to keep on top of their copyright obligations, manage licenses and review and adjust schedules but is still a highly efficient means to cope with large numbers of requests to use materials. The poster details speed and efficiency gains for professors and library staff while reducing legal exposure.

Hermes: Seamless delivery of containerized bioinformatics workflows in hybrid cloud (HTC environments

Directory of Open Access Journals (Sweden)

Athanassios M. Kintsakis

2017-01-01

Full Text Available Hermes introduces a new “describe once, run anywhere” paradigm for the execution of bioinformatics workflows in hybrid cloud environments. It combines the traditional features of parallelization-enabled workflow management systems and of distributed computing platforms in a container-based approach. It offers seamless deployment, overcoming the burden of setting up and configuring the software and network requirements. Most importantly, Hermes fosters the reproducibility of scientific workflows by supporting standardization of the software execution environment, thus leading to consistent scientific workflow results and accelerating scientific output.

SPECT/CT workflow and imaging protocols

Energy Technology Data Exchange (ETDEWEB)

Beckers, Catherine [University Hospital of Liege, Division of Nuclear Medicine and Oncological Imaging, Department of Medical Physics, Liege (Belgium); Hustinx, Roland [University Hospital of Liege, Division of Nuclear Medicine and Oncological Imaging, Department of Medical Physics, Liege (Belgium); Domaine Universitaire du Sart Tilman, Service de Medecine Nucleaire et Imagerie Oncologique, CHU de Liege, Liege (Belgium)

2014-05-15

Introducing a hybrid imaging method such as single photon emission computed tomography (SPECT)/CT greatly alters the routine in the nuclear medicine department. It requires designing new workflow processes and the revision of original scheduling process and imaging protocols. In addition, the imaging protocol should be adapted for each individual patient, so that performing CT is fully justified and the CT procedure is fully tailored to address the clinical issue. Such refinements often occur before the procedure is started but may be required at some intermediate stage of the procedure. Furthermore, SPECT/CT leads in many instances to a new partnership with the radiology department. This article presents practical advice and highlights the key clinical elements which need to be considered to help understand the workflow process of SPECT/CT and optimise imaging protocols. The workflow process using SPECT/CT is complex in particular because of its bimodal character, the large spectrum of stakeholders, the multiplicity of their activities at various time points and the need for real-time decision-making. With help from analytical tools developed for quality assessment, the workflow process using SPECT/CT may be separated into related, but independent steps, each with its specific human and material resources to use as inputs or outputs. This helps identify factors that could contribute to failure in routine clinical practice. At each step of the process, practical aspects to optimise imaging procedure and protocols are developed. A decision-making algorithm for justifying each CT indication as well as the appropriateness of each CT protocol is the cornerstone of routine clinical practice using SPECT/CT. In conclusion, implementing hybrid SPECT/CT imaging requires new ways of working. It is highly rewarding from a clinical perspective, but it also proves to be a daily challenge in terms of management. (orig.)

SPECT/CT workflow and imaging protocols

International Nuclear Information System (INIS)

Beckers, Catherine; Hustinx, Roland

2014-01-01

Introducing a hybrid imaging method such as single photon emission computed tomography (SPECT)/CT greatly alters the routine in the nuclear medicine department. It requires designing new workflow processes and the revision of original scheduling process and imaging protocols. In addition, the imaging protocol should be adapted for each individual patient, so that performing CT is fully justified and the CT procedure is fully tailored to address the clinical issue. Such refinements often occur before the procedure is started but may be required at some intermediate stage of the procedure. Furthermore, SPECT/CT leads in many instances to a new partnership with the radiology department. This article presents practical advice and highlights the key clinical elements which need to be considered to help understand the workflow process of SPECT/CT and optimise imaging protocols. The workflow process using SPECT/CT is complex in particular because of its bimodal character, the large spectrum of stakeholders, the multiplicity of their activities at various time points and the need for real-time decision-making. With help from analytical tools developed for quality assessment, the workflow process using SPECT/CT may be separated into related, but independent steps, each with its specific human and material resources to use as inputs or outputs. This helps identify factors that could contribute to failure in routine clinical practice. At each step of the process, practical aspects to optimise imaging procedure and protocols are developed. A decision-making algorithm for justifying each CT indication as well as the appropriateness of each CT protocol is the cornerstone of routine clinical practice using SPECT/CT. In conclusion, implementing hybrid SPECT/CT imaging requires new ways of working. It is highly rewarding from a clinical perspective, but it also proves to be a daily challenge in terms of management. (orig.)

Enhancing and Customizing Laboratory Information Systems to Improve/Enhance Pathologist Workflow.

Science.gov (United States)

Hartman, Douglas J

2015-06-01

Optimizing pathologist workflow can be difficult because it is affected by many variables. Surgical pathologists must complete many tasks that culminate in a final pathology report. Several software systems can be used to enhance/improve pathologist workflow. These include voice recognition software, pre-sign-out quality assurance, image utilization, and computerized provider order entry. Recent changes in the diagnostic coding and the more prominent role of centralized electronic health records represent potential areas for increased ways to enhance/improve the workflow for surgical pathologists. Additional unforeseen changes to the pathologist workflow may accompany the introduction of whole-slide imaging technology to the routine diagnostic work. Copyright © 2015 Elsevier Inc. All rights reserved.

Electronic Health Record-Driven Workflow for Diagnostic Radiologists.

Science.gov (United States)

Geeslin, Matthew G; Gaskin, Cree M

2016-01-01

In most settings, radiologists maintain a high-throughput practice in which efficiency is crucial. The conversion from film-based to digital study interpretation and data storage launched the era of PACS-driven workflow, leading to significant gains in speed. The advent of electronic health records improved radiologists' access to patient data; however, many still find this aspect of workflow to be relatively cumbersome. Nevertheless, the ability to guide a diagnostic interpretation with clinical information, beyond that provided in the examination indication, can add significantly to the specificity of a radiologist's interpretation. Responsibilities of the radiologist include, but are not limited to, protocoling examinations, interpreting studies, chart review, peer review, writing notes, placing orders, and communicating with referring providers. Most of the aforementioned activities are not PACS-centric and require a login to one or more additional applications. Consolidation of these tasks for completion through a single interface can simplify workflow, save time, and potentially reduce the incidence of errors. Here, the authors describe diagnostic radiology workflow that leverages the electronic health record to significantly add to a radiologist's ability to be part of the health care team, provide relevant interpretations, and improve efficiency and quality. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Styx Grid Services: Lightweight Middleware for Efficient Scientific Workflows

Directory of Open Access Journals (Sweden)

J.D. Blower

2006-01-01

Full Text Available The service-oriented approach to performing distributed scientific research is potentially very powerful but is not yet widely used in many scientific fields. This is partly due to the technical difficulties involved in creating services and workflows and the inefficiency of many workflow systems with regard to handling large datasets. We present the Styx Grid Service, a simple system that wraps command-line programs and allows them to be run over the Internet exactly as if they were local programs. Styx Grid Services are very easy to create and use and can be composed into powerful workflows with simple shell scripts or more sophisticated graphical tools. An important feature of the system is that data can be streamed directly from service to service, significantly increasing the efficiency of workflows that use large data volumes. The status and progress of Styx Grid Services can be monitored asynchronously using a mechanism that places very few demands on firewalls. We show how Styx Grid Services can interoperate with with Web Services and WS-Resources using suitable adapters.

Analyzing the Gap between Workflows and their Natural Language Descriptions

NARCIS (Netherlands)

Groth, P.T.; Gil, Y

2009-01-01

Scientists increasingly use workflows to represent and share their computational experiments. Because of their declarative nature, focus on pre-existing component composition and the availability of visual editors, workflows provide a valuable start for creating user-friendly environments for end

Assessment of the Nurse Medication Administration Workflow Process

Directory of Open Access Journals (Sweden)

Nathan Huynh

2016-01-01

Full Text Available This paper presents findings of an observational study of the Registered Nurse (RN Medication Administration Process (MAP conducted on two comparable medical units in a large urban tertiary care medical center in Columbia, South Carolina. A total of 305 individual MAP observations were recorded over a 6-week period with an average of 5 MAP observations per RN participant for both clinical units. A key MAP variation was identified in terms of unbundled versus bundled MAP performance. In the unbundled workflow, an RN engages in the MAP by performing only MAP tasks during a care episode. In the bundled workflow, an RN completes medication administration along with other patient care responsibilities during the care episode. Using a discrete-event simulation model, this paper addresses the difference between unbundled and bundled workflow and their effects on simulated redesign interventions.

Developing integrated workflows for the digitisation of herbarium specimens using a modular and scalable approach.

Science.gov (United States)

Haston, Elspeth; Cubey, Robert; Pullan, Martin; Atkins, Hannah; Harris, David J

2012-01-01

Digitisation programmes in many institutes frequently involve disparate and irregular funding, diverse selection criteria and scope, with different members of staff managing and operating the processes. These factors have influenced the decision at the Royal Botanic Garden Edinburgh to develop an integrated workflow for the digitisation of herbarium specimens which is modular and scalable to enable a single overall workflow to be used for all digitisation projects. This integrated workflow is comprised of three principal elements: a specimen workflow, a data workflow and an image workflow.The specimen workflow is strongly linked to curatorial processes which will impact on the prioritisation, selection and preparation of the specimens. The importance of including a conservation element within the digitisation workflow is highlighted. The data workflow includes the concept of three main categories of collection data: label data, curatorial data and supplementary data. It is shown that each category of data has its own properties which influence the timing of data capture within the workflow. Development of software has been carried out for the rapid capture of curatorial data, and optical character recognition (OCR) software is being used to increase the efficiency of capturing label data and supplementary data. The large number and size of the images has necessitated the inclusion of automated systems within the image workflow.

An Adaptable Seismic Data Format for Modern Scientific Workflows

Science.gov (United States)

Smith, J. A.; Bozdag, E.; Krischer, L.; Lefebvre, M.; Lei, W.; Podhorszki, N.; Tromp, J.

2013-12-01

Data storage, exchange, and access play a critical role in modern seismology. Current seismic data formats, such as SEED, SAC, and SEG-Y, were designed with specific applications in mind and are frequently a major bottleneck in implementing efficient workflows. We propose a new modern parallel format that can be adapted for a variety of seismic workflows. The Adaptable Seismic Data Format (ASDF) features high-performance parallel read and write support and the ability to store an arbitrary number of traces of varying sizes. Provenance information is stored inside the file so that users know the origin of the data as well as the precise operations that have been applied to the waveforms. The design of the new format is based on several real-world use cases, including earthquake seismology and seismic interferometry. The metadata is based on the proven XML schemas StationXML and QuakeML. Existing time-series analysis tool-kits are easily interfaced with this new format so that seismologists can use robust, previously developed software packages, such as ObsPy and the SAC library. ADIOS, netCDF4, and HDF5 can be used as the underlying container format. At Princeton University, we have chosen to use ADIOS as the container format because it has shown superior scalability for certain applications, such as dealing with big data on HPC systems. In the context of high-performance computing, we have implemented ASDF into the global adjoint tomography workflow on Oak Ridge National Laboratory's supercomputer Titan.

The MPO API: A tool for recording scientific workflows

Energy Technology Data Exchange (ETDEWEB)

Wright, John C., E-mail: jcwright@mit.edu [MIT Plasma Science and Fusion Center, Cambridge, MA (United States); Greenwald, Martin; Stillerman, Joshua [MIT Plasma Science and Fusion Center, Cambridge, MA (United States); Abla, Gheni; Chanthavong, Bobby; Flanagan, Sean; Schissel, David; Lee, Xia [General Atomics, San Diego, CA (United States); Romosan, Alex; Shoshani, Arie [Lawrence Berkeley Laboratory, Berkeley, CA (United States)

2014-05-15

Highlights: • A description of a new framework and tool for recording scientific workflows, especially those resulting from simulation and analysis. • An explanation of the underlying technologies used to implement this web based tool. • Several examples of using the tool. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for high-consequence applications. The Metadata, Provenance and Ontology (MPO) project builds on previous work [M. Greenwald, Fusion Eng. Des. 87 (2012) 2205–2208] and is focused on providing documentation of workflows, data provenance and the ability to data-mine large sets of results. While there are important design and development aspects to the data structures and user interfaces, we concern ourselves in this paper with the application programming interface (API) – the set of functions that interface with the data server. Our approach for the data server is to follow the Representational State Transfer (RESTful) software architecture style for client–server communication. At its core, the API uses the POST and GET methods of the HTTP protocol to transfer workflow information in message bodies to targets specified in the URL to and from the database via a web server. Higher level API calls are built upon this core API. This design facilitates implementation on different platforms and in different languages and is robust to changes in the underlying technologies used. The command line client implementation can communicate with the data server from any machine with HTTP access.

The MPO API: A tool for recording scientific workflows

International Nuclear Information System (INIS)

Wright, John C.; Greenwald, Martin; Stillerman, Joshua; Abla, Gheni; Chanthavong, Bobby; Flanagan, Sean; Schissel, David; Lee, Xia; Romosan, Alex; Shoshani, Arie

2014-01-01

Highlights: • A description of a new framework and tool for recording scientific workflows, especially those resulting from simulation and analysis. • An explanation of the underlying technologies used to implement this web based tool. • Several examples of using the tool. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for high-consequence applications. The Metadata, Provenance and Ontology (MPO) project builds on previous work [M. Greenwald, Fusion Eng. Des. 87 (2012) 2205–2208] and is focused on providing documentation of workflows, data provenance and the ability to data-mine large sets of results. While there are important design and development aspects to the data structures and user interfaces, we concern ourselves in this paper with the application programming interface (API) – the set of functions that interface with the data server. Our approach for the data server is to follow the Representational State Transfer (RESTful) software architecture style for client–server communication. At its core, the API uses the POST and GET methods of the HTTP protocol to transfer workflow information in message bodies to targets specified in the URL to and from the database via a web server. Higher level API calls are built upon this core API. This design facilitates implementation on different platforms and in different languages and is robust to changes in the underlying technologies used. The command line client implementation can communicate with the data server from any machine with HTTP access

Customized workflow development and data modularization concepts for RNA-Sequencing and metatranscriptome experiments.

Science.gov (United States)

Lott, Steffen C; Wolfien, Markus; Riege, Konstantin; Bagnacani, Andrea; Wolkenhauer, Olaf; Hoffmann, Steve; Hess, Wolfgang R

2017-11-10

RNA-Sequencing (RNA-Seq) has become a widely used approach to study quantitative and qualitative aspects of transcriptome data. The variety of RNA-Seq protocols, experimental study designs and the characteristic properties of the organisms under investigation greatly affect downstream and comparative analyses. In this review, we aim to explain the impact of structured pre-selection, classification and integration of best-performing tools within modularized data analysis workflows and ready-to-use computing infrastructures towards experimental data analyses. We highlight examples for workflows and use cases that are presented for pro-, eukaryotic and mixed dual RNA-Seq (meta-transcriptomics) experiments. In addition, we are summarizing the expertise of the laboratories participating in the project consortium "Structured Analysis and Integration of RNA-Seq experiments" (de.STAIR) and its integration with the Galaxy-workbench of the RNA Bioinformatics Center (RBC). Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Swabs to genomes: a comprehensive workflow

Directory of Open Access Journals (Sweden)

Madison I. Dunitz

2015-05-01

Full Text Available The sequencing, assembly, and basic analysis of microbial genomes, once a painstaking and expensive undertaking, has become much easier for research labs with access to standard molecular biology and computational tools. However, there are a confusing variety of options available for DNA library preparation and sequencing, and inexperience with bioinformatics can pose a significant barrier to entry for many who may be interested in microbial genomics. The objective of the present study was to design, test, troubleshoot, and publish a simple, comprehensive workflow from the collection of an environmental sample (a swab to a published microbial genome; empowering even a lab or classroom with limited resources and bioinformatics experience to perform it.

Summer Student Report - AV Workflow

CERN Document Server

Abramson, Jessie

2014-01-01

The AV Workflow is web application which allows cern users to publish, update and delete videos from cds. During my summer internship I implemented the backend of the new version of the AV Worklow in python using the django framework.

Parametric Room Acoustic workflows with real-time acoustic simulation

DEFF Research Database (Denmark)

Parigi, Dario

2017-01-01

The paper investigates and assesses the opportunities that real-time acoustic simulation offer to engage in parametric acoustics workflow and to influence architectural designs from early design stages......The paper investigates and assesses the opportunities that real-time acoustic simulation offer to engage in parametric acoustics workflow and to influence architectural designs from early design stages...

Exploring the impact of an automated prescription-filling device on community pharmacy technician workflow

Science.gov (United States)

Walsh, Kristin E.; Chui, Michelle Anne; Kieser, Mara A.; Williams, Staci M.; Sutter, Susan L.; Sutter, John G.

2012-01-01

Objective To explore community pharmacy technician workflow change after implementation of an automated robotic prescription-filling device. Methods At an independent community pharmacy in rural Mayville, WI, pharmacy technicians were observed before and 3 months after installation of an automated robotic prescription-filling device. The main outcome measures were sequences and timing of technician workflow steps, workflow interruptions, automation surprises, and workarounds. Results Of the 77 and 80 observations made before and 3 months after robot installation, respectively, 17 different workflow sequences were observed before installation and 38 after installation. Average prescription filling time was reduced by 40 seconds per prescription with use of the robot. Workflow interruptions per observation increased from 1.49 to 1.79 (P = 0.11), and workarounds increased from 10% to 36% after robot use. Conclusion Although automated prescription-filling devices can increase efficiency, workflow interruptions and workarounds may negate that efficiency. Assessing changes in workflow and sequencing of tasks that may result from the use of automation can help uncover opportunities for workflow policy and procedure redesign. PMID:21896459

Surgical Workflow Analysis: Ideal Application of Navigated Linear Array Ultrasound in Low-Grade Glioma Surgery.

Science.gov (United States)

Lothes, Thomas Ernst; Siekmann, Max; König, Ralph Werner; Wirtz, Christian Rainer; Coburger, Jan

2016-11-01

Background  Intraoperative imaging in low-grade glioma (LGG) surgery can facilitate residual tumor control and improve surgical outcome. The aim of the study was to evaluate the ideal application and typical interactions of intraoperative MRI (iMRI), conventional low-frequency intraoperative ultrasound (cioUS), and high-frequency linear array intraoperative ultrasound (lioUS) to optimize surgical workflow. Methods  Prospectively, we included 11 patients with an LGG. Typical procedural workflow in the iMRI suite was recorded with a compatible software. We took notes of duration, frequency of application, the surgeon's evaluation of image quality, and the respective benefit of lioUS (15 MHz), cioUS (7 MHz), and iMRI (1.5 T). With the help of the workflow software, we meticulously analyzed ∼ 55 hours of surgery. Results  During the interventions, lioUS was used more often (76.3%) than cioUS (23.7%) and showed a better mean image quality (1 = best to 6 = worst) of 2.08 versus 3.26 with cioUS. The benefit of the lioUS application was rated with an average of 2.27, whereas the cioUS probe only reached a mean value of 3.83. The most common application of lioUS was resection control (42.6%); cioUS was used mainly for orientation (63.2%). Overall, lioUS was used more often and was rated better for both the purposes just described regarding image quality and benefit. Estimated residual tumor based on lioUS alone was lower than the final residual tumor detected with iMRI (7.5% versus 14.5%). The latter technique was rated as the best imaging modality for resection control in all cases followed by lioUS. Conclusion  We provide proof of principle for workflow assessment in cranial neurosurgery. Although iMRI remains the imaging method of choice, lioUS has shown to be beneficial in a combined setup. Evaluation of lioUS was significantly superior to cioUS in most indications except for subcortical lesions. Georg Thieme Verlag KG Stuttgart · New York.

From Paper Based Clinical Practice Guidelines to Declarative Workflow Management

DEFF Research Database (Denmark)

Lyng, Karen Marie; Hildebrandt, Thomas; Mukkamala, Raghava Rao

2009-01-01

a sub workflow can be described in a declarative workflow management system: the Resultmaker Online Consultant (ROC). The example demonstrates that declarative primitives allow to naturally extend the paper based flowchart to an executable model without introducing a complex cyclic control flow graph....

Mathematics Teaching Anxiety and Self-Efficacy Beliefs toward Mathematics Teaching: A Path Analysis

Science.gov (United States)

Peker, Murat

2016-01-01

The purpose of this study was to investigate the relationship between pre-service primary school teachers' mathematics teaching anxiety and their self-efficacy beliefs toward mathematics teaching through path analysis. There were a total of 250 pre-service primary school teachers involved in this study. Of the total, 202 were female and 48 were…

Workflow interruptions, cognitive failure and near-accidents in health care.

Science.gov (United States)

Elfering, Achim; Grebner, Simone; Ebener, Corinne

2015-01-01

Errors are frequent in health care. A specific model was tested that affirms failure in cognitive action regulation to mediate the influence of nurses' workflow interruptions and safety conscientiousness on near-accidents in health care. One hundred and sixty-five nurses from seven Swiss hospitals participated in a questionnaire survey. Structural equation modelling confirmed the hypothesised mediation model. Cognitive failure in action regulation significantly mediated the influence of workflow interruptions on near-accidents (p accidents via cognitive failure in action regulation was also significant (p accidents; moreover, cognitive failure mediated the association between compliance and near-accidents (p < .05). Contrary to expectations, compliance with safety regulations was not related to workflow interruptions. Workflow interruptions caused by colleagues, patients and organisational constraints are likely to trigger errors in nursing. Work redesign is recommended to reduce cognitive failure and improve safety of nurses and patients.

Flexible Early Warning Systems with Workflows and Decision Tables

Science.gov (United States)

Riedel, F.; Chaves, F.; Zeiner, H.

2012-04-01

An essential part of early warning systems and systems for crisis management are decision support systems that facilitate communication and collaboration. Often official policies specify how different organizations collaborate and what information is communicated to whom. For early warning systems it is crucial that information is exchanged dynamically in a timely manner and all participants get exactly the information they need to fulfil their role in the crisis management process. Information technology obviously lends itself to automate parts of the process. We have experienced however that in current operational systems the information logistics processes are hard-coded, even though they are subject to change. In addition, systems are tailored to the policies and requirements of a certain organization and changes can require major software refactoring. We seek to develop a system that can be deployed and adapted to multiple organizations with different dynamic runtime policies. A major requirement for such a system is that changes can be applied locally without affecting larger parts of the system. In addition to the flexibility regarding changes in policies and processes, the system needs to be able to evolve; when new information sources become available, it should be possible to integrate and use these in the decision process. In general, this kind of flexibility comes with a significant increase in complexity. This implies that only IT professionals can maintain a system that can be reconfigured and adapted; end-users are unable to utilise the provided flexibility. In the business world similar problems arise and previous work suggested using business process management systems (BPMS) or workflow management systems (WfMS) to guide and automate early warning processes or crisis management plans. However, the usability and flexibility of current WfMS are limited, because current notations and user interfaces are still not suitable for end-users, and workflows

Proteomic workflow for analysis of archival formalin-fixed and paraffin-embedded clinical samples to a depth of 10 000 proteins.

Science.gov (United States)

Wiśniewski, Jacek R; Duś, Kamila; Mann, Matthias

2013-04-01

Archival formalin-fixed and paraffin-embedded clinical samples represent a very diverse source of material for proteomic investigation of diseases, often with follow-up patient information. Here, we describe an analytical workflow for analysis of laser-capture microdissected formalin-fixed and paraffin-embedded samples that allows studying proteomes to a depth of 10 000 proteins per sample. The workflow involves lysis of tissue in SDS-containing buffer, detergent removal, and consecutive digestion of the proteins with two enzymes by the multienzyme digestion filter-aided sample preparation method. Resulting peptides are fractionated by pipette-tip based strong anion exchange into six fractions and analyzed by LC-MS/MS on a bench top quadrupole Orbitrap mass spectrometer. Analysis of the data using the MaxQuant software resulted in the identification of 9502 ± 28 protein groups per a 110 nL sample of microdissected cells from human colonic adenoma. This depth of proteome analysis enables systemic insights into the organization of the adenoma cells and an estimation of the abundances of known biomarkers. It also allows the identification of proteins expressed from tumor suppressors, oncogenes, and other key players in the development and progression of the colorectal cancer. Our proteomic platform can be used for quantitative comparisons between samples representing different stages of diseases and thus can be applied to the discovery of biomarkers or drug targets. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Automation of Flexible Migration Workflows

Directory of Open Access Journals (Sweden)

Dirk von Suchodoletz

2011-03-01

Full Text Available Many digital preservation scenarios are based on the migration strategy, which itself is heavily tool-dependent. For popular, well-defined and often open file formats – e.g., digital images, such as PNG, GIF, JPEG – a wide range of tools exist. Migration workflows become more difficult with proprietary formats, as used by the several text processing applications becoming available in the last two decades. If a certain file format can not be rendered with actual software, emulation of the original environment remains a valid option. For instance, with the original Lotus AmiPro or Word Perfect, it is not a problem to save an object of this type in ASCII text or Rich Text Format. In specific environments, it is even possible to send the file to a virtual printer, thereby producing a PDF as a migration output. Such manual migration tasks typically involve human interaction, which may be feasible for a small number of objects, but not for larger batches of files.We propose a novel approach using a software-operated VNC abstraction layer in order to replace humans with machine interaction. Emulators or virtualization tools equipped with a VNC interface are very well suited for this approach. But screen, keyboard and mouse interaction is just part of the setup. Furthermore, digital objects need to be transferred into the original environment in order to be extracted after processing. Nevertheless, the complexity of the new generation of migration services is quickly rising; a preservation workflow is now comprised not only of the migration tool itself, but of a complete software and virtual hardware stack with recorded workflows linked to every supported migration scenario. Thus the requirements of OAIS management must include proper software archiving, emulator selection, system image and recording handling. The concept of view-paths could help either to automatically determine the proper pre-configured virtual environment or to set up system

Considering Time in Orthophotography Production: from a General Workflow to a Shortened Workflow for a Faster Disaster Response

Science.gov (United States)

Lucas, G.

2015-08-01

This article overall deals with production time with orthophoto imagery with medium size digital frame camera. The workflow examination follows two main parts: data acquisition and post-processing. The objectives of the research are fourfold: 1/ gathering time references for the most important steps of orthophoto production (it turned out that literature is missing on this topic); these figures are used later for total production time estimation; 2/ identifying levers for reducing orthophoto production time; 3/ building a simplified production workflow for emergency response: less exigent with accuracy and faster; and compare it to a classical workflow; 4/ providing methodical elements for the estimation of production time with a custom project. In the data acquisition part a comprehensive review lists and describes all the factors that may affect the acquisition efficiency. Using a simulation with different variables (average line length, time of the turns, flight speed) their effect on acquisition efficiency is quantitatively examined. Regarding post-processing, the time references figures were collected from the processing of a 1000 frames case study with 15 cm GSD covering a rectangular area of 447 km2; the time required to achieve each step during the production is written down. When several technical options are possible, each one is tested and time documented so as all alternatives are available. Based on a technical choice with the workflow and using the compiled time reference of the elementary steps, a total time is calculated for the post-processing of the 1000 frames. Two scenarios are compared as regards to time and accuracy. The first one follows the "normal" practices, comprising triangulation, orthorectification and advanced mosaicking methods (feature detection, seam line editing and seam applicator); the second is simplified and make compromise over positional accuracy (using direct geo-referencing) and seamlines preparation in order to achieve

Developing integrated workflows for the digitisation of herbarium specimens using a modular and scalable approach

Directory of Open Access Journals (Sweden)

Elspeth Haston

2012-07-01

Full Text Available Digitisation programmes in many institutes frequently involve disparate and irregular funding, diverse selection criteria and scope, with different members of staff managing and operating the processes. These factors have influenced the decision at the Royal Botanic Garden Edinburgh to develop an integrated workflow for the digitisation of herbarium specimens which is modular and scalable to enable a single overall workflow to be used for all digitisation projects. This integrated workflow is comprised of three principal elements: a specimen workflow, a data workflow and an image workflow.The specimen workflow is strongly linked to curatorial processes which will impact on the prioritisation, selection and preparation of the specimens. The importance of including a conservation element within the digitisation workflow is highlighted. The data workflow includes the concept of three main categories of collection data: label data, curatorial data and supplementary data. It is shown that each category of data has its own properties which influence the timing of data capture within the workflow. Development of software has been carried out for the rapid capture of curatorial data, and optical character recognition (OCR software is being used to increase the efficiency of capturing label data and supplementary data. The large number and size of the images has necessitated the inclusion of automated systems within the image workflow.

Data mining workflow templates for intelligent discovery assistance in RapidMiner

OpenAIRE

Kietz, J U; Serban, F; Bernstein, A; Fischer, S

2010-01-01

Knowledge Discovery in Databases (KDD) has evolved during the last years and reached a mature stage offering plenty of operators to solve complex tasks. User support for building workflows, in contrast, has not increased proportionally. The large number of operators available in current KDD systems make it difficult for users to successfully analyze data. Moreover, workflows easily contain a large number of operators and parts of the workflows are applied several times, thus it is hard for us...

Requirements for Secure Logging of Decentralized Cross-Organizational Workflow Executions

NARCIS (Netherlands)

Wombacher, Andreas; Wieringa, Roelf J.; Jonker, Willem; Knezevic, P.; Pokraev, S.; meersman, R; Tari, Z; herrero, p; Méndez, G.; Cavedon, L.; Martin, D.; Hinze, A.; Buchanan, G.

2005-01-01

The control of actions performed by parties involved in a decentralized cross-organizational workflow is done by several independent workflow engines. Due to the lack of a centralized coordination control, an auditing is required which supports a reliable and secure detection of malicious actions

CrossFlow: Cross-Organizational Workflow Management in Dynamic Virtual Enterprises

NARCIS (Netherlands)

Grefen, P.W.P.J.; Aberer, Karl; Hoffner, Yigal; Ludwig, Heiko

In this report, we present the approach to cross-organizational workflow management of the CrossFlow project. CrossFlow is a European research project aiming at the support of cross-organizational workflows in dynamic virtual enterprises. The cooperation in these virtual enterprises is based on

CrossFlow : cross-organizational workflow management in dynamic virtual enterprises

NARCIS (Netherlands)

Grefen, P.W.P.J.; Aberer, K.; Hoffner, Y.

2000-01-01

This paper gives a detailed overview of the approach to cross-organizational workflow management developed in the CrossFlow project. CrossFlow is a European research project aiming at the support of cross-organizational workflows in dynamic virtual enterprises. The cooperation in these virtual

The Symbiotic Relationship between Scientific Workflow and Provenance (Invited)

Science.gov (United States)

Stephan, E.

2010-12-01

The purpose of this presentation is to describe the symbiotic nature of scientific workflows and provenance. We will also discuss the current trends and real world challenges facing these two distinct research areas. Although motivated differently, the needs of the international science communities are the glue that binds this relationship together. Understanding and articulating the science drivers to these communities is paramount as these technologies evolve and mature. Originally conceived for managing business processes, workflows are now becoming invaluable assets in both computational and experimental sciences. These reconfigurable, automated systems provide essential technology to perform complex analyses by coupling together geographically distributed disparate data sources and applications. As a result, workflows are capable of higher throughput in a shorter amount of time than performing the steps manually. Today many different workflow products exist; these could include Kepler and Taverna or similar products like MeDICI, developed at PNNL, that are standardized on the Business Process Execution Language (BPEL). Provenance, originating from the French term Provenir “to come from”, is used to describe the curation process of artwork as art is passed from owner to owner. The concept of provenance was adopted by digital libraries as a means to track the lineage of documents while standards such as the DublinCore began to emerge. In recent years the systems science community has increasingly expressed the need to expand the concept of provenance to formally articulate the history of scientific data. Communities such as the International Provenance and Annotation Workshop (IPAW) have formalized a provenance data model. The Open Provenance Model, and the W3C is hosting a provenance incubator group featuring the Proof Markup Language. Although both workflows and provenance have risen from different communities and operate independently, their mutual

Research and Implementation of Key Technologies in Multi-Agent System to Support Distributed Workflow

Science.gov (United States)

Pan, Tianheng

2018-01-01

In recent years, the combination of workflow management system and Multi-agent technology is a hot research field. The problem of lack of flexibility in workflow management system can be improved by introducing multi-agent collaborative management. The workflow management system adopts distributed structure. It solves the problem that the traditional centralized workflow structure is fragile. In this paper, the agent of Distributed workflow management system is divided according to its function. The execution process of each type of agent is analyzed. The key technologies such as process execution and resource management are analyzed.

Measuring Semantic and Structural Information for Data Oriented Workflow Retrieval with Cost Constraints

Directory of Open Access Journals (Sweden)

Yinglong Ma

2014-01-01

Full Text Available The reuse of data oriented workflows (DOWs can reduce the cost of workflow system development and control the risk of project failure and therefore is crucial for accelerating the automation of business processes. Reusing workflows can be achieved by measuring the similarity among candidate workflows and selecting the workflow satisfying requirements of users from them. However, due to DOWs being often developed based on an open, distributed, and heterogeneous environment, different users often can impose diverse cost constraints on data oriented workflows. This makes the reuse of DOWs challenging. There is no clear solution for retrieving DOWs with cost constraints. In this paper, we present a novel graph based model of DOWs with cost constraints, called constrained data oriented workflow (CDW, which can express cost constraints that users are often concerned about. An approach is proposed for retrieving CDWs, which seamlessly combines semantic and structural information of CDWs. A distance measure based on matrix theory is adopted to seamlessly combine semantic and structural similarities of CDWs for selecting and reusing them. Finally, the related experiments are made to show the effectiveness and efficiency of our approach.

A Multilevel Secure Workflow Management System

National Research Council Canada - National Science Library

Kang, Myong H; Froscher, Judith N; Sheth, Amit P; Kochut, Krys J; Miller, John A

1999-01-01

The Department of Defense (DoD) needs multilevel secure (MLS) workflow management systems to enable globally distributed users and applications to cooperate across classification levels to achieve mission critical goals...

Workflows for Full Waveform Inversions

Science.gov (United States)

Boehm, Christian; Krischer, Lion; Afanasiev, Michael; van Driel, Martin; May, Dave A.; Rietmann, Max; Fichtner, Andreas

2017-04-01

Despite many theoretical advances and the increasing availability of high-performance computing clusters, full seismic waveform inversions still face considerable challenges regarding data and workflow management. While the community has access to solvers which can harness modern heterogeneous computing architectures, the computational bottleneck has fallen to these often manpower-bounded issues that need to be overcome to facilitate further progress. Modern inversions involve huge amounts of data and require a tight integration between numerical PDE solvers, data acquisition and processing systems, nonlinear optimization libraries, and job orchestration frameworks. To this end we created a set of libraries and applications revolving around Salvus (http://salvus.io), a novel software package designed to solve large-scale full waveform inverse problems. This presentation focuses on solving passive source seismic full waveform inversions from local to global scales with Salvus. We discuss (i) design choices for the aforementioned components required for full waveform modeling and inversion, (ii) their implementation in the Salvus framework, and (iii) how it is all tied together by a usable workflow system. We combine state-of-the-art algorithms ranging from high-order finite-element solutions of the wave equation to quasi-Newton optimization algorithms using trust-region methods that can handle inexact derivatives. All is steered by an automated interactive graph-based workflow framework capable of orchestrating all necessary pieces. This naturally facilitates the creation of new Earth models and hopefully sparks new scientific insights. Additionally, and even more importantly, it enhances reproducibility and reliability of the final results.

DIaaS: Data-Intensive workflows as a service - Enabling easy composition and deployment of data-intensive workflows on Virtual Research Environments

Science.gov (United States)

Filgueira, R.; Ferreira da Silva, R.; Deelman, E.; Atkinson, M.

2016-12-01

We present the Data-Intensive workflows as a Service (DIaaS) model for enabling easy data-intensive workflow composition and deployment on clouds using containers. DIaaS model backbone is Asterism, an integrated solution for running data-intensive stream-based applications on heterogeneous systems, which combines the benefits of dispel4py with Pegasus workflow systems. The stream-based executions of an Asterism workflow are managed by dispel4py, while the data movement between different e-Infrastructures, and the coordination of the application execution are automatically managed by Pegasus. DIaaS combines Asterism framework with Docker containers to provide an integrated, complete, easy-to-use, portable approach to run data-intensive workflows on distributed platforms. Three containers integrate the DIaaS model: a Pegasus node, and an MPI and an Apache Storm clusters. Container images are described as Dockerfiles (available online at http://github.com/dispel4py/pegasus_dispel4py), linked to Docker Hub for providing continuous integration (automated image builds), and image storing and sharing. In this model, all required software (workflow systems and execution engines) for running scientific applications are packed into the containers, which significantly reduces the effort (and possible human errors) required by scientists or VRE administrators to build such systems. The most common use of DIaaS will be to act as a backend of VREs or Scientific Gateways to run data-intensive applications, deploying cloud resources upon request. We have demonstrated the feasibility of DIaaS using the data-intensive seismic ambient noise cross-correlation application (Figure 1). The application preprocesses (Phase1) and cross-correlates (Phase2) traces from several seismic stations. The application is submitted via Pegasus (Container1), and Phase1 and Phase2 are executed in the MPI (Container2) and Storm (Container3) clusters respectively. Although both phases could be executed

Optimizing CyberShake Seismic Hazard Workflows for Large HPC Resources

Science.gov (United States)

Callaghan, S.; Maechling, P. J.; Juve, G.; Vahi, K.; Deelman, E.; Jordan, T. H.

2014-12-01

The CyberShake computational platform is a well-integrated collection of scientific software and middleware that calculates 3D simulation-based probabilistic seismic hazard curves and hazard maps for the Los Angeles region. Currently each CyberShake model comprises about 235 million synthetic seismograms from about 415,000 rupture variations computed at 286 sites. CyberShake integrates large-scale parallel and high-throughput serial seismological research codes into a processing framework in which early stages produce files used as inputs by later stages. Scientific workflow tools are used to manage the jobs, data, and metadata. The Southern California Earthquake Center (SCEC) developed the CyberShake platform using USC High Performance Computing and Communications systems and open-science NSF resources.CyberShake calculations were migrated to the NSF Track 1 system NCSA Blue Waters when it became operational in 2013, via an interdisciplinary team approach including domain scientists, computer scientists, and middleware developers. Due to the excellent performance of Blue Waters and CyberShake software optimizations, we reduced the makespan (a measure of wallclock time-to-solution) of a CyberShake study from 1467 to 342 hours. We will describe the technical enhancements behind this improvement, including judicious introduction of new GPU software, improved scientific software components, increased workflow-based automation, and Blue Waters-specific workflow optimizations.Our CyberShake performance improvements highlight the benefits of scientific workflow tools. The CyberShake workflow software stack includes the Pegasus Workflow Management System (Pegasus-WMS, which includes Condor DAGMan), HTCondor, and Globus GRAM, with Pegasus-mpi-cluster managing the high-throughput tasks on the HPC resources. The workflow tools handle data management, automatically transferring about 13 TB back to SCEC storage.We will present performance metrics from the most recent Cyber

Pegasus Workflow Management System: Helping Applications From Earth and Space

Science.gov (United States)

Mehta, G.; Deelman, E.; Vahi, K.; Silva, F.

2010-12-01

Pegasus WMS is a Workflow Management System that can manage large-scale scientific workflows across Grid, local and Cloud resources simultaneously. Pegasus WMS provides a means for representing the workflow of an application in an abstract XML form, agnostic of the resources available to run it and the location of data and executables. It then compiles these workflows into concrete plans by querying catalogs and farming computations across local and distributed computing resources, as well as emerging commercial and community cloud environments in an easy and reliable manner. Pegasus WMS optimizes the execution as well as data movement by leveraging existing Grid and cloud technologies via a flexible pluggable interface and provides advanced features like reusing existing data, automatic cleanup of generated data, and recursive workflows with deferred planning. It also captures all the provenance of the workflow from the planning stage to the execution of the generated data, helping scientists to accurately measure performance metrics of their workflow as well as data reproducibility issues. Pegasus WMS was initially developed as part of the GriPhyN project to support large-scale high-energy physics and astrophysics experiments. Direct funding from the NSF enabled support for a wide variety of applications from diverse domains including earthquake simulation, bacterial RNA studies, helioseismology and ocean modeling. Earthquake Simulation: Pegasus WMS was recently used in a large scale production run in 2009 by the Southern California Earthquake Centre to run 192 million loosely coupled tasks and about 2000 tightly coupled MPI style tasks on National Cyber infrastructure for generating a probabilistic seismic hazard map of the Southern California region. SCEC ran 223 workflows over a period of eight weeks, using on average 4,420 cores, with a peak of 14,540 cores. A total of 192 million files were produced totaling about 165TB out of which 11TB of data was saved

Design and implementation of a secure workflow system based on PKI/PMI

Science.gov (United States)

Yan, Kai; Jiang, Chao-hui

2013-03-01

As the traditional workflow system in privilege management has the following weaknesses: low privilege management efficiency, overburdened for administrator, lack of trust authority etc. A secure workflow model based on PKI/PMI is proposed after studying security requirements of the workflow systems in-depth. This model can achieve static and dynamic authorization after verifying user's ID through PKC and validating user's privilege information by using AC in workflow system. Practice shows that this system can meet the security requirements of WfMS. Moreover, it can not only improve system security, but also ensures integrity, confidentiality, availability and non-repudiation of the data in the system.

Coupling of a continuum ice sheet model and a discrete element calving model using a scientific workflow system

Science.gov (United States)

Memon, Shahbaz; Vallot, Dorothée; Zwinger, Thomas; Neukirchen, Helmut

2017-04-01

Scientific communities generate complex simulations through orchestration of semi-structured analysis pipelines which involves execution of large workflows on multiple, distributed and heterogeneous computing and data resources. Modeling ice dynamics of glaciers requires workflows consisting of many non-trivial, computationally expensive processing tasks which are coupled to each other. From this domain, we present an e-Science use case, a workflow, which requires the execution of a continuum ice flow model and a discrete element based calving model in an iterative manner. Apart from the execution, this workflow also contains data format conversion tasks that support the execution of ice flow and calving by means of transition through sequential, nested and iterative steps. Thus, the management and monitoring of all the processing tasks including data management and transfer of the workflow model becomes more complex. From the implementation perspective, this workflow model was initially developed on a set of scripts using static data input and output references. In the course of application usage when more scripts or modifications introduced as per user requirements, the debugging and validation of results were more cumbersome to achieve. To address these problems, we identified a need to have a high-level scientific workflow tool through which all the above mentioned processes can be achieved in an efficient and usable manner. We decided to make use of the e-Science middleware UNICORE (Uniform Interface to Computing Resources) that allows seamless and automated access to different heterogenous and distributed resources which is supported by a scientific workflow engine. Based on this, we developed a high-level scientific workflow model for coupling of massively parallel High-Performance Computing (HPC) jobs: a continuum ice sheet model (Elmer/Ice) and a discrete element calving and crevassing model (HiDEM). In our talk we present how the use of a high

Taking advantage of HTML5 browsers to realize the concepts of session state and workflow sharing in web-tool applications

Science.gov (United States)

Suftin, I.; Read, J. S.; Walker, J.

2013-12-01

Scientists prefer not having to be tied down to a specific machine or operating system in order to analyze local and remote data sets or publish work. Increasingly, analysis has been migrating to decentralized web services and data sets, using web clients to provide the analysis interface. While simplifying workflow access, analysis, and publishing of data, the move does bring with it its own unique set of issues. Web clients used for analysis typically offer workflows geared towards a single user, with steps and results that are often difficult to recreate and share with others. Furthermore, workflow results often may not be easily used as input for further analysis. Older browsers further complicate things by having no way to maintain larger chunks of information, often offloading the job of storage to the back-end server or trying to squeeze it into a cookie. It has been difficult to provide a concept of "session storage" or "workflow sharing" without a complex orchestration of the back-end for storage depending on either a centralized file system or database. With the advent of HTML5, browsers gained the ability to store more information through the use of the Web Storage API (a browser-cookie holds a maximum of 4 kilobytes). Web Storage gives us the ability to store megabytes of arbitrary data in-browser either with an expiration date or just for a session. This allows scientists to create, update, persist and share their workflow without depending on the backend to store session information, providing the flexibility for new web-based workflows to emerge. In the DSASWeb portal ( http://cida.usgs.gov/DSASweb/ ), using these techniques, the representation of every step in the analyst's workflow is stored as plain-text serialized JSON, which we can generate as a text file and provide to the analyst as an upload. This file may then be shared with others and loaded back into the application, restoring the application to the state it was in when the session file

Analog to digital workflow improvement: a quantitative study.

Science.gov (United States)

Wideman, Catherine; Gallet, Jacqueline

2006-01-01

This study tracked a radiology department's conversion from utilization of a Kodak Amber analog system to a Kodak DirectView DR 5100 digital system. Through the use of ProModel Optimization Suite, a workflow simulation software package, significant quantitative information was derived from workflow process data measured before and after the change to a digital system. Once the digital room was fully operational and the radiology staff comfortable with the new system, average patient examination time was reduced from 9.24 to 5.28 min, indicating that a higher patient throughput could be achieved. Compared to the analog system, chest examination time for modality specific activities was reduced by 43%. The percentage of repeat examinations experienced with the digital system also decreased to 8% vs. the level of 9.5% experienced with the analog system. The study indicated that it is possible to quantitatively study clinical workflow and productivity by using commercially available software.

An integrated billing application to streamline clinician workflow.

Science.gov (United States)

Vawdrey, David K; Walsh, Colin; Stetson, Peter D

2014-01-01

Between 2008 and 2010, our academic medical center transitioned to electronic provider documentation using a commercial electronic health record system. For attending physicians, one of the most frustrating aspects of this experience was the system's failure to support their existing electronic billing workflow. Because of poor system integration, it was difficult to verify the supporting documentation for each bill and impractical to track whether billable notes had corresponding charges. We developed and deployed in 2011 an integrated billing application called "iCharge" that streamlines clinicians' documentation and billing workflow, and simultaneously populates the inpatient problem list using billing diagnosis codes. Each month, over 550 physicians use iCharge to submit approximately 23,000 professional service charges for over 4,200 patients. On average, about 2.5 new problems are added to each patient's problem list. This paper describes the challenges and benefits of workflow integration across disparate applications and presents an example of innovative software development within a commercial EHR framework.

CMS Alignement and Calibration workflows: lesson learned and future plans

CERN Document Server

AUTHOR|(CDS)2069172

2014-01-01

We review the online and offline workflows designed to align and calibrate the CMS detector. Starting from the gained experience during the first LHC run, we discuss the expected developments for Run II. In particular, we describe the envisioned different stages, from the alignment using cosmic rays data to the detector alignment and calibration using the first proton-proton collisions data ( O(100 pb-1) ) and a larger dataset ( O(1 fb-1) ) to reach the target precision. The automatisation of the workflow and the integration in the online and offline activity (dedicated triggers and datasets, data skims, workflows to compute the calibration and alignment constants) are discussed.

SMITH: a LIMS for handling next-generation sequencing workflows.

Science.gov (United States)

Venco, Francesco; Vaskin, Yuriy; Ceol, Arnaud; Muller, Heiko

2014-01-01

through an API provided by the workflow management system. The parameters and input data are passed to the workflow engine that performs de-multiplexing, quality control, alignments, etc. SMITH standardizes, automates, and speeds up sequencing workflows. Annotation of data with key-value pairs facilitates meta-analysis.

SMITH: a LIMS for handling next-generation sequencing workflows

Science.gov (United States)

2014-01-01

workflows are available through an API provided by the workflow management system. The parameters and input data are passed to the workflow engine that performs de-multiplexing, quality control, alignments, etc. Conclusions SMITH standardizes, automates, and speeds up sequencing workflows. Annotation of data with key-value pairs facilitates meta-analysis. PMID:25471934

Logical provenance in data-oriented workflows?

KAUST Repository

Ikeda, R.; Das Sarma, Akash; Widom, J.

2013-01-01

for general transformations, introducing the notions of correctness, precision, and minimality. We then determine when properties such as correctness and minimality carry over from the individual transformations' provenance to the workflow provenance. We

Workflow in clinical trial sites & its association with near miss events for data quality: ethnographic, workflow & systems simulation.

Science.gov (United States)

de Carvalho, Elias Cesar Araujo; Batilana, Adelia Portero; Claudino, Wederson; Reis, Luiz Fernando Lima; Schmerling, Rafael A; Shah, Jatin; Pietrobon, Ricardo

2012-01-01

With the exponential expansion of clinical trials conducted in (Brazil, Russia, India, and China) and VISTA (Vietnam, Indonesia, South Africa, Turkey, and Argentina) countries, corresponding gains in cost and enrolment efficiency quickly outpace the consonant metrics in traditional countries in North America and European Union. However, questions still remain regarding the quality of data being collected in these countries. We used ethnographic, mapping and computer simulation studies to identify/address areas of threat to near miss events for data quality in two cancer trial sites in Brazil. Two sites in Sao Paolo and Rio Janeiro were evaluated using ethnographic observations of workflow during subject enrolment and data collection. Emerging themes related to threats to near miss events for data quality were derived from observations. They were then transformed into workflows using UML-AD and modeled using System Dynamics. 139 tasks were observed and mapped through the ethnographic study. The UML-AD detected four major activities in the workflow evaluation of potential research subjects prior to signature of informed consent, visit to obtain subject́s informed consent, regular data collection sessions following study protocol and closure of study protocol for a given project. Field observations pointed to three major emerging themes: (a) lack of standardized process for data registration at source document, (b) multiplicity of data repositories and (c) scarcity of decision support systems at the point of research intervention. Simulation with policy model demonstrates a reduction of the rework problem. Patterns of threats to data quality at the two sites were similar to the threats reported in the literature for American sites. The clinical trial site managers need to reorganize staff workflow by using information technology more efficiently, establish new standard procedures and manage professionals to reduce near miss events and save time/cost. Clinical trial

Extension of specification language for soundness and completeness of service workflow

Science.gov (United States)

Viriyasitavat, Wattana; Xu, Li Da; Bi, Zhuming; Sapsomboon, Assadaporn

2018-05-01

A Service Workflow is an aggregation of distributed services to fulfill specific functionalities. With ever increasing available services, the methodologies for the selections of the services against the given requirements become main research subjects in multiple disciplines. A few of researchers have contributed to the formal specification languages and the methods for model checking; however, existing methods have the difficulties to tackle with the complexity of workflow compositions. In this paper, we propose to formalize the specification language to reduce the complexity of the workflow composition. To this end, we extend a specification language with the consideration of formal logic, so that some effective theorems can be derived for the verification of syntax, semantics, and inference rules in the workflow composition. The logic-based approach automates compliance checking effectively. The Service Workflow Specification (SWSpec) has been extended and formulated, and the soundness, completeness, and consistency of SWSpec applications have been verified; note that a logic-based SWSpec is mandatory for the development of model checking. The application of the proposed SWSpec has been demonstrated by the examples with the addressed soundness, completeness, and consistency.

Teaching image analysis at DIKU

DEFF Research Database (Denmark)

Johansen, Peter

2010-01-01

The early development of computer vision at Department of Computer Science at University of Copenhagen (DIKU) is briefly described. The different disciplines in computer vision are introduced, and the principles for teaching two courses, an image analysis course, and a robot lab class are outlined....

Workflow optimization beyond RIS and PACS

International Nuclear Information System (INIS)

Treitl, M.; Wirth, S.; Lucke, A.; Nissen-Meyer, S.; Trumm, C.; Rieger, J.; Pfeifer, K.-J.; Reiser, M.; Villain, S.

2005-01-01

Technological progress and the rising cost pressure on the healthcare system have led to a drastic change in the work environment of radiologists today. The pervasive demand for workflow optimization and increased efficiency of its activities raises the question of whether by employment of electronic systems, such as RIS and PACS, the potentials of digital technology are sufficiently used to fulfil this demand. This report describes the tasks and structures in radiology departments, which so far are only insufficiently supported by commercially available electronic systems but are nevertheless substantial. We developed and employed a web-based, integrated workplace system, which simplifies many daily tasks of departmental organization and administration apart from well-established tasks of documentation. Furthermore, we analyzed the effects exerted on departmental workflow by employment of this system for 3 years. (orig.) [de

The use of workflows in the design and implementation of complex experiments in macromolecular crystallography

International Nuclear Information System (INIS)

Brockhauser, Sandor; Svensson, Olof; Bowler, Matthew W.; Nanao, Max; Gordon, Elspeth; Leal, Ricardo M. F.; Popov, Alexander; Gerring, Matthew; McCarthy, Andrew A.; Gotz, Andy

2012-01-01

A powerful and easy-to-use workflow environment has been developed at the ESRF for combining experiment control with online data analysis on synchrotron beamlines. This tool provides the possibility of automating complex experiments without the need for expertise in instrumentation control and programming, but rather by accessing defined beamline services. The automation of beam delivery, sample handling and data analysis, together with increasing photon flux, diminishing focal spot size and the appearance of fast-readout detectors on synchrotron beamlines, have changed the way that many macromolecular crystallography experiments are planned and executed. Screening for the best diffracting crystal, or even the best diffracting part of a selected crystal, has been enabled by the development of microfocus beams, precise goniometers and fast-readout detectors that all require rapid feedback from the initial processing of images in order to be effective. All of these advances require the coupling of data feedback to the experimental control system and depend on immediate online data-analysis results during the experiment. To facilitate this, a Data Analysis WorkBench (DAWB) for the flexible creation of complex automated protocols has been developed. Here, example workflows designed and implemented using DAWB are presented for enhanced multi-step crystal characterizations, experiments involving crystal reorientation with kappa goniometers, crystal-burning experiments for empirically determining the radiation sensitivity of a crystal system and the application of mesh scans to find the best location of a crystal to obtain the highest diffraction quality. Beamline users interact with the prepared workflows through a specific brick within the beamline-control GUI MXCuBE

From shared data to sharing workflow: Merging PACS and teleradiology

International Nuclear Information System (INIS)

Benjamin, Menashe; Aradi, Yinon; Shreiber, Reuven

2010-01-01

Due to a host of technological, interface, operational and workflow limitations, teleradiology and PACS/RIS were historically developed as separate systems serving different purposes. PACS/RIS handled local radiology storage and workflow management while teleradiology addressed remote access to images. Today advanced PACS/RIS support complete site radiology workflow for attending physicians, whether on-site or remote. In parallel, teleradiology has emerged into a service of providing remote, off-hours, coverage for emergency radiology and to a lesser extent subspecialty reading to subscribing sites and radiology groups. When attending radiologists use teleradiology for remote access to a site, they may share all relevant patient data and participate in the site's workflow like their on-site peers. The operation gets cumbersome and time consuming when these radiologists serve multi-sites, each requiring a different remote access, or when the sites do not employ the same PACS/RIS/Reporting Systems and do not share the same ownership. The least efficient operation is of teleradiology companies engaged in reading for multiple facilities. As these services typically employ non-local radiologists, they are allowed to share some of the available patient data necessary to provide an emergency report but, by enlarge, they do not share the workflow of the sites they serve. Radiology stakeholders usually prefer to have their own radiologists perform all radiology tasks including interpretation of off-hour examinations. It is possible with current technology to create a system that combines the benefits of local radiology services to multiple sites with the advantages offered by adding subspecialty and off-hours emergency services through teleradiology. Such a system increases efficiency for the radiology groups by enabling all users, regardless of location, to work 'local' and fully participate in the workflow of every site. We refer to such a system as SuperPACS.

Emergency medicine resident physicians' perceptions of electronic documentation and workflow: a mixed methods study.

Science.gov (United States)

Neri, P M; Redden, L; Poole, S; Pozner, C N; Horsky, J; Raja, A S; Poon, E; Schiff, G; Landman, A

2015-01-01

To understand emergency department (ED) physicians' use of electronic documentation in order to identify usability and workflow considerations for the design of future ED information system (EDIS) physician documentation modules. We invited emergency medicine resident physicians to participate in a mixed methods study using task analysis and qualitative interviews. Participants completed a simulated, standardized patient encounter in a medical simulation center while documenting in the test environment of a currently used EDIS. We recorded the time on task, type and sequence of tasks performed by the participants (including tasks performed in parallel). We then conducted semi-structured interviews with each participant. We analyzed these qualitative data using the constant comparative method to generate themes. Eight resident physicians participated. The simulation session averaged 17 minutes and participants spent 11 minutes on average on tasks that included electronic documentation. Participants performed tasks in parallel, such as history taking and electronic documentation. Five of the 8 participants performed a similar workflow sequence during the first part of the session while the remaining three used different workflows. Three themes characterize electronic documentation: (1) physicians report that location and timing of documentation varies based on patient acuity and workload, (2) physicians report a need for features that support improved efficiency; and (3) physicians like viewing available patient data but struggle with integration of the EDIS with other information sources. We confirmed that physicians spend much of their time on documentation (65%) during an ED patient visit. Further, we found that resident physicians did not all use the same workflow and approach even when presented with an identical standardized patient scenario. Future EHR design should consider these varied workflows while trying to optimize efficiency, such as improving

The CMS tracker calibration workflow: Experience with cosmic ray data

International Nuclear Information System (INIS)

Frosali, Simone

2010-01-01

During the second part of 2008 a CMS commissioning was performed with the acquisition of cosmic events in global runs. Cosmic rays detected in the muon chambers were used to trigger the readout of all CMS subdetectors in the general data acquisition system. A total of about 300M of tracks were collected by the CMS Muon Chambers with a 3.8T magnetic field produced by the CMS superconducting solenoid, 6M of which pointing to the tracker region and reconstructed by the Si-Strip Tracker (SST) detectors. Other 1M of cosmic tracks were collected with the magnetic field off. Using the cosmic data available it was possible to validate the performances of the CMS tracker calibration workflows. In this paper the adopted calibration workflow is described. In particular, the three main calibration workflows requested for the low level reconstruction of the SST, i.e. gain calibration, Lorentz angle calibration and bad components identification, are described. The results obtained using cosmic tracks for these three calibration workflows are also presented.

MCRUNJOB: A High energy physics workflow planner for grid production processing

International Nuclear Information System (INIS)

Graham, Gregory E.

2004-01-01

McRunjob is a powerful grid workflow manager used to manage the generation of large numbers of production processing jobs in High Energy Physics. In use at both the DZero and CMS experiments, McRunjob has been used to manage large Monte Carlo production processing since 1999 and is being extended to uses in regular production processing for analysis and reconstruction. Described at CHEP 2001, McRunjob converts core metadata into jobs submittable in a variety of environments. The powerful core metadata description language includes methods for converting the metadata into persistent forms, job descriptions, multi-step workflows, and data provenance information. The language features allow for structure in the metadata by including full expressions, namespaces, functional dependencies, site specific parameters in a grid environment, and ontological definitions. It also has simple control structures for parallelization of large jobs. McRunjob features a modular design which allows for easy expansion to new job description languages or new application level tasks

Teaching audience analysis to the technical student

Science.gov (United States)

Debs, M. B.; Brillhart, L. V.

1981-01-01

Teaching audience analysis, as practiced in a technical writing course for engineering students, is discussed. Audience analysis is described as the task of defining the audience for a particular piece of writing and determining those characteristics of the audience which constrain the writer and effect reception of the message. A mature technical writing style that shows the tension produced when a text is written to be read and understood is considered in terms of audience analysis. Techniques include: (1) conveying to students the concept that a reader with certain expectations exist, (2) team teaching to preserve the context of a given technical discipline, and (3) assigning a technical report that addresses a variety of readers, thus establishing the complexity of audience oriented writing.

Automation and workflow considerations for embedding Digimarc Barcodes at scale

Science.gov (United States)

Rodriguez, Tony; Haaga, Don; Calhoon, Sean

2015-03-01

The Digimarc® Barcode is a digital watermark applied to packages and variable data labels that carries GS1 standard GTIN-14 data traditionally carried by a 1-D barcode. The Digimarc Barcode can be read with smartphones and imaging-based barcode readers commonly used in grocery and retail environments. Using smartphones, consumers can engage with products and retailers can materially increase the speed of check-out, increasing store margins and providing a better experience for shoppers. Internal testing has shown an average of 53% increase in scanning throughput, enabling 100's of millions of dollars in cost savings [1] for retailers when deployed at scale. To get to scale, the process of embedding a digital watermark must be automated and integrated within existing workflows. Creating the tools and processes to do so represents a new challenge for the watermarking community. This paper presents a description and an analysis of the workflow implemented by Digimarc to deploy the Digimarc Barcode at scale. An overview of the tools created and lessons learned during the introduction of technology to the market are provided.

A-Posteriori Detection of Sensor Infrastructure Errors in Correlated Sensor Data and Business Workflows

NARCIS (Netherlands)

Wombacher, Andreas; Rinderle-Ma, Stefanie; Toumani, Farouk; Wolf, Karsten

Some physical objects are influenced by business workflows and are observed by sensors. Since both sensor infrastructures and business workflows must deal with imprecise information, the correlation of sensor data and business workflow data related to physical objects might be used a-posteriori to

Restructuring of workflows to minimise errors via stochastic model checking: An automated evolutionary approach

DEFF Research Database (Denmark)

Herbert, Luke Thomas; Hansen, Zaza Nadja Lee

2016-01-01

This article presents a framework for the automated restructuring of stochastic workflows to reduce the impact of faults. The framework allows for the modelling of workflows by means of a formalised subset of the BPMN workflow language. We extend this modelling formalism to describe faults...

Workflow-Oriented Cyberinfrastructure for Sensor Data Analytics

Science.gov (United States)

Orcutt, J. A.; Rajasekar, A.; Moore, R. W.; Vernon, F.

2015-12-01

Sensor streams comprise an increasingly large part of Earth Science data. Analytics based on sensor data require an easy way to perform operations such as acquisition, conversion to physical units, metadata linking, sensor fusion, analysis and visualization on distributed sensor streams. Furthermore, embedding real-time sensor data into scientific workflows is of growing interest. We have implemented a scalable networked architecture that can be used to dynamically access packets of data in a stream from multiple sensors, and perform synthesis and analysis across a distributed network. Our system is based on the integrated Rule Oriented Data System (irods.org), which accesses sensor data from the Antelope Real Time Data System (brtt.com), and provides virtualized access to collections of data streams. We integrate real-time data streaming from different sources, collected for different purposes, on different time and spatial scales, and sensed by different methods. iRODS, noted for its policy-oriented data management, brings to sensor processing features and facilities such as single sign-on, third party access control lists ( ACLs), location transparency, logical resource naming, and server-side modeling capabilities while reducing the burden on sensor network operators. Rich integrated metadata support also makes it straightforward to discover data streams of interest and maintain data provenance. The workflow support in iRODS readily integrates sensor processing into any analytical pipeline. The system is developed as part of the NSF-funded Datanet Federation Consortium (datafed.org). APIs for selecting, opening, reaping and closing sensor streams are provided, along with other helper functions to associate metadata and convert sensor packets into NetCDF and JSON formats. Near real-time sensor data including seismic sensors, environmental sensors, LIDAR and video streams are available through this interface. A system for archiving sensor data and metadata in Net

Complexity Metrics for Workflow Nets

DEFF Research Database (Denmark)

Lassen, Kristian Bisgaard; van der Aalst, Wil M.P.

2009-01-01

analysts have difficulties grasping the dynamics implied by a process model. Recent empirical studies show that people make numerous errors when modeling complex business processes, e.g., about 20 percent of the EPCs in the SAP reference model have design flaws resulting in potential deadlocks, livelocks......, etc. It seems obvious that the complexity of the model contributes to design errors and a lack of understanding. It is not easy to measure complexity, however. This paper presents three complexity metrics that have been implemented in the process analysis tool ProM. The metrics are defined...... for a subclass of Petri nets named Workflow nets, but the results can easily be applied to other languages. To demonstrate the applicability of these metrics, we have applied our approach and tool to 262 relatively complex Protos models made in the context of various student projects. This allows us to validate...

Deadline-constrained workflow scheduling algorithms for Infrastructure as a Service Clouds

NARCIS (Netherlands)

Abrishami, S.; Naghibzadeh, M.; Epema, D.H.J.

2013-01-01

The advent of Cloud computing as a new model of service provisioning in distributed systems encourages researchers to investigate its benefits and drawbacks on executing scientific applications such as workflows. One of the most challenging problems in Clouds is workflow scheduling, i.e., the

Implementation of Cyberinfrastructure and Data Management Workflow for a Large-Scale Sensor Network

Science.gov (United States)

Jones, A. S.; Horsburgh, J. S.

2014-12-01

Monitoring with in situ environmental sensors and other forms of field-based observation presents many challenges for data management, particularly for large-scale networks consisting of multiple sites, sensors, and personnel. The availability and utility of these data in addressing scientific questions relies on effective cyberinfrastructure that facilitates transformation of raw sensor data into functional data products. It also depends on the ability of researchers to share and access the data in useable formats. In addition to addressing the challenges presented by the quantity of data, monitoring networks need practices to ensure high data quality, including procedures and tools for post processing. Data quality is further enhanced if practitioners are able to track equipment, deployments, calibrations, and other events related to site maintenance and associate these details with observational data. In this presentation we will describe the overall workflow that we have developed for research groups and sites conducting long term monitoring using in situ sensors. Features of the workflow include: software tools to automate the transfer of data from field sites to databases, a Python-based program for data quality control post-processing, a web-based application for online discovery and visualization of data, and a data model and web interface for managing physical infrastructure. By automating the data management workflow, the time from collection to analysis is reduced and sharing and publication is facilitated. The incorporation of metadata standards and descriptions and the use of open-source tools enhances the sustainability and reusability of the data. We will describe the workflow and tools that we have developed in the context of the iUTAH (innovative Urban Transitions and Aridregion Hydrosustainability) monitoring network. The iUTAH network consists of aquatic and climate sensors deployed in three watersheds to monitor Gradients Along Mountain to Urban

Grid workflow job execution service 'Pilot'

Science.gov (United States)

Shamardin, Lev; Kryukov, Alexander; Demichev, Andrey; Ilyin, Vyacheslav

2011-12-01

'Pilot' is a grid job execution service for workflow jobs. The main goal for the service is to automate computations with multiple stages since they can be expressed as simple workflows. Each job is a directed acyclic graph of tasks and each task is an execution of something on a grid resource (or 'computing element'). Tasks may be submitted to any WS-GRAM (Globus Toolkit 4) service. The target resources for the tasks execution are selected by the Pilot service from the set of available resources which match the specific requirements from the task and/or job definition. Some simple conditional execution logic is also provided. The 'Pilot' service is built on the REST concepts and provides a simple API through authenticated HTTPS. This service is deployed and used in production in a Russian national grid project GridNNN.

Grid workflow job execution service 'Pilot'

International Nuclear Information System (INIS)

Shamardin, Lev; Kryukov, Alexander; Demichev, Andrey; Ilyin, Vyacheslav

2011-01-01

'Pilot' is a grid job execution service for workflow jobs. The main goal for the service is to automate computations with multiple stages since they can be expressed as simple workflows. Each job is a directed acyclic graph of tasks and each task is an execution of something on a grid resource (or 'computing element'). Tasks may be submitted to any WS-GRAM (Globus Toolkit 4) service. The target resources for the tasks execution are selected by the Pilot service from the set of available resources which match the specific requirements from the task and/or job definition. Some simple conditional execution logic is also provided. The 'Pilot' service is built on the REST concepts and provides a simple API through authenticated HTTPS. This service is deployed and used in production in a Russian national grid project GridNNN.

Managing and Communicating Operational Workflow: Designing and Implementing an Electronic Outpatient Whiteboard.

Science.gov (United States)

Steitz, Bryan D; Weinberg, Stuart T; Danciu, Ioana; Unertl, Kim M

2016-01-01

Healthcare team members in emergency department contexts have used electronic whiteboard solutions to help manage operational workflow for many years. Ambulatory clinic settings have highly complex operational workflow, but are still limited in electronic assistance to communicate and coordinate work activities. To describe and discuss the design, implementation, use, and ongoing evolution of a coordination and collaboration tool supporting ambulatory clinic operational workflow at Vanderbilt University Medical Center (VUMC). The outpatient whiteboard tool was initially designed to support healthcare work related to an electronic chemotherapy order-entry application. After a highly successful initial implementation in an oncology context, a high demand emerged across the organization for the outpatient whiteboard implementation. Over the past 10 years, developers have followed an iterative user-centered design process to evolve the tool. The electronic outpatient whiteboard system supports 194 separate whiteboards and is accessed by over 2800 distinct users on a typical day. Clinics can configure their whiteboards to support unique workflow elements. Since initial release, features such as immunization clinical decision support have been integrated into the system, based on requests from end users. The success of the electronic outpatient whiteboard demonstrates the usefulness of an operational workflow tool within the ambulatory clinic setting. Operational workflow tools can play a significant role in supporting coordination, collaboration, and teamwork in ambulatory healthcare settings.

How to plan workflow changes: a practical quality improvement tool used in an outpatient hospital pharmacy.

Science.gov (United States)

Aguilar, Christine; Chau, Connie; Giridharan, Neha; Huh, Youchin; Cooley, Janet; Warholak, Terri L

2013-06-01

A quality improvement tool is provided to improve pharmacy workflow with the goal of minimizing errors caused by workflow issues. This study involved workflow evaluation and reorganization, and staff opinions of these proposed changes. The study pharmacy was an outpatient pharmacy in the Tucson area. However, the quality improvement tool may be applied in all pharmacy settings, including but not limited to community, hospital, and independent pharmacies. This tool can help the user to identify potential workflow problem spots, such as high-traffic areas through the creation of current and proposed workflow diagrams. Creating a visual representation can help the user to identify problem spots and to propose changes to optimize workflow. It may also be helpful to assess employees' opinions of these changes. The workflow improvement tool can be used to assess where improvements are needed in a pharmacy's floor plan and workflow. Suggestions for improvements in the study pharmacy included increasing the number of verification points and decreasing high traffic areas in the workflow. The employees of the study pharmacy felt that the proposed changes displayed greater continuity, sufficiency, accessibility, and space within the pharmacy.

Using Multimedia for Teaching Analysis in History of Modern Architecture.

Science.gov (United States)

Perryman, Garry

This paper presents a case for the development and support of a computer-based interactive multimedia program for teaching analysis in community college architecture design programs. Analysis in architecture design is an extremely important strategy for the teaching of higher-order thinking skills, which senior schools of architecture look for in…

Parallel workflow tools to facilitate human brain MRI post-processing

Directory of Open Access Journals (Sweden)

Zaixu eCui

2015-05-01

Full Text Available Multi-modal magnetic resonance imaging (MRI techniques are widely applied in human brain studies. To obtain specific brain measures of interest from MRI datasets, a number of complex image post-processing steps are typically required. Parallel workflow tools have recently been developed, concatenating individual processing steps and enabling fully automated processing of raw MRI data to obtain the final results. These workflow tools are also designed to make optimal use of available computational resources and to support the parallel processing of different subjects or of independent processing steps for a single subject. Automated, parallel MRI post-processing tools can greatly facilitate relevant brain investigations and are being increasingly applied. In this review, we briefly summarize these parallel workflow tools and discuss relevant issues.

Task Delegation Based Access Control Models for Workflow Systems

Science.gov (United States)

Gaaloul, Khaled; Charoy, François

e-Government organisations are facilitated and conducted using workflow management systems. Role-based access control (RBAC) is recognised as an efficient access control model for large organisations. The application of RBAC in workflow systems cannot, however, grant permissions to users dynamically while business processes are being executed. We currently observe a move away from predefined strict workflow modelling towards approaches supporting flexibility on the organisational level. One specific approach is that of task delegation. Task delegation is a mechanism that supports organisational flexibility, and ensures delegation of authority in access control systems. In this paper, we propose a Task-oriented Access Control (TAC) model based on RBAC to address these requirements. We aim to reason about task from organisational perspectives and resources perspectives to analyse and specify authorisation constraints. Moreover, we present a fine grained access control protocol to support delegation based on the TAC model.

Adaptive workflow simulation of emergency response

NARCIS (Netherlands)

Bruinsma, Guido Wybe Jan

2010-01-01

Recent incidents and major training exercises in and outside the Netherlands have persistently shown that not having or not sharing information during emergency response are major sources of emergency response inefficiency and error, and affect incident mitigation outcomes through workflow planning

BGDMdocker: a Docker workflow for data mining and visualization of bacterial pan-genomes and biosynthetic gene clusters

Directory of Open Access Journals (Sweden)

Gong Cheng

2017-11-01

Full Text Available Recently, Docker technology has received increasing attention throughout the bioinformatics community. However, its implementation has not yet been mastered by most biologists; accordingly, its application in biological research has been limited. In order to popularize this technology in the field of bioinformatics and to promote the use of publicly available bioinformatics tools, such as Dockerfiles and Images from communities, government sources, and private owners in the Docker Hub Registry and other Docker-based resources, we introduce here a complete and accurate bioinformatics workflow based on Docker. The present workflow enables analysis and visualization of pan-genomes and biosynthetic gene clusters of bacteria. This provides a new solution for bioinformatics mining of big data from various publicly available biological databases. The present step-by-step guide creates an integrative workflow through a Dockerfile to allow researchers to build their own Image and run Container easily.

BGDMdocker: a Docker workflow for data mining and visualization of bacterial pan-genomes and biosynthetic gene clusters.

Science.gov (United States)

Cheng, Gong; Lu, Quan; Ma, Ling; Zhang, Guocai; Xu, Liang; Zhou, Zongshan

2017-01-01

Recently, Docker technology has received increasing attention throughout the bioinformatics community. However, its implementation has not yet been mastered by most biologists; accordingly, its application in biological research has been limited. In order to popularize this technology in the field of bioinformatics and to promote the use of publicly available bioinformatics tools, such as Dockerfiles and Images from communities, government sources, and private owners in the Docker Hub Registry and other Docker-based resources, we introduce here a complete and accurate bioinformatics workflow based on Docker. The present workflow enables analysis and visualization of pan-genomes and biosynthetic gene clusters of bacteria. This provides a new solution for bioinformatics mining of big data from various publicly available biological databases. The present step-by-step guide creates an integrative workflow through a Dockerfile to allow researchers to build their own Image and run Container easily.

Towards seamless workflows in agile data science

Science.gov (United States)

Klump, J. F.; Robertson, J.

2017-12-01

Agile workflows are a response to projects with requirements that may change over time. They prioritise rapid and flexible responses to change, preferring to adapt to changes in requirements rather than predict them before a project starts. This suits the needs of research very well because research is inherently agile in its methodology. The adoption of agile methods has made collaborative data analysis much easier in a research environment fragmented across institutional data stores, HPC, personal and lab computers and more recently cloud environments. Agile workflows use tools that share a common worldview: in an agile environment, there may be more that one valid version of data, code or environment in play at any given time. All of these versions need references and identifiers. For example, a team of developers following the git-flow conventions (github.com/nvie/gitflow) may have several active branches, one for each strand of development. These workflows allow rapid and parallel iteration while maintaining identifiers pointing to individual snapshots of data and code and allowing rapid switching between strands. In contrast, the current focus of versioning in research data management is geared towards managing data for reproducibility and long-term preservation of the record of science. While both are important goals in the persistent curation domain of the institutional research data infrastructure, current tools emphasise planning over adaptation and can introduce unwanted rigidity by insisting on a single valid version or point of truth. In the collaborative curation domain of a research project, things are more fluid. However, there is no equivalent to the "versioning iso-surface" of the git protocol for the management and versioning of research data. At CSIRO we are developing concepts and tools for the agile management of software code and research data for virtual research environments, based on our experiences of actual data analytics projects in the

Mixed Methods Approach for Measuring the Impact of Video Telehealth on Outpatient Clinic Triage Nurse Workflow

Science.gov (United States)

Cady, Rhonda G.; Finkelstein, Stanley M.

2015-01-01

Nurse-delivered telephone triage is a common component of outpatient clinic settings. Adding new communication technology to clinic triage has the potential to not only transform the triage process, but also alter triage workflow. Evaluating the impact of new technology on an existing workflow is paramount to maximizing efficiency of the delivery system. This study investigated triage nurse workflow before and after the implementation of video telehealth using a sequential mixed methods protocol that combined ethnography and time-motion study to provide a robust analysis of the implementation environment. Outpatient clinic triage using video telehealth required significantly more time than telephone triage, indicating a reduction in nurse efficiency. Despite the increased time needed to conduct video telehealth, nurses consistently rated it useful in providing triage. Interpretive analysis of the qualitative and quantitative data suggests the increased depth and breadth of data available during video triage alters the assessment triage nurses provide physicians. This in turn could impact the time physicians spend formulating a diagnosis and treatment plan. While the immediate impact of video telehealth is a reduction in triage nurse efficiency, what is unknown is the impact of video telehealth on physician and overall clinic efficiency. Future studies should address this area. PMID:24080753

e-BioFlow: improving practical use of workflow systems in bioinformatics

NARCIS (Netherlands)

Wassink, I.; Ooms, M.; Neerincx, P.; Rauwerda, H.; Leunissen, J.A.M.; Breit, T.M.; Nijholt, A.; Vet, van der P.

2010-01-01

Workflow management systems (WfMSs) are useful tools for bioinformaticians. As experiences with using WfMSs accumulate, shortcomings of current systems become apparent. In this paper, we focus on practical issues that hinder WfMS users and that arise in the design and execution of workflows, and in

Supporting the Construction of Workflows for Biodiversity Problem-Solving Accessing Secure, Distributed Resources

Directory of Open Access Journals (Sweden)

J.S. Pahwa

2006-01-01

Full Text Available In the Biodiversity World (BDW project we have created a flexible and extensible Web Services-based Grid environment for biodiversity researchers to solve problems in biodiversity and analyse biodiversity patterns. In this environment, heterogeneous and globally distributed biodiversity-related resources such as data sets and analytical tools are made available to be accessed and assembled by users into workflows to perform complex scientific experiments. One such experiment is bioclimatic modelling of the geographical distribution of individual species using climate variables in order to explain past and future climate-related changes in species distribution. Data sources and analytical tools required for such analysis of species distribution are widely dispersed, available on heterogeneous platforms, present data in different formats and lack inherent interoperability. The present BDW system brings all these disparate units together so that the user can combine tools with little thought as to their original availability, data formats and interoperability. The new prototype BDW system architecture not only brings together heterogeneous resources but also enables utilisation of computational resources and provides a secure access to BDW resources via a federated security model. We describe features of the new BDW system and its security model which enable user authentication from a workflow application as part of workflow execution.

O potencial das redes de Petri em modelagem e análise de processos de negócio The potencial of Petri nets in modeling and analysis of workflow

Directory of Open Access Journals (Sweden)

Sílvia Inês Dallavalle de Pádua

2004-04-01

Full Text Available A tecnologia de gerenciamento workflow procura oferecer uma solução flexível em apoio aos processos de negócios, por meio da facilitação de modificações e da criação de novos processos. Entretanto, a falta de definição bem formalizada no que se refere à sintaxe e à semântica de tais técnicas dificulta análises mais complexas dos modelos. Nesse caso, redes de Petri atuam com excelente potencial, uma vez que possuem representação gráfica, são de fácil aprendizado, funcionam como linguagem de comunicação entre especialistas de diversas áreas, possibilitam descrever aspectos estáticos e dinâmicos do sistema a ser representado e ainda possuem o formalismo matemático necessário para métodos de análise já consagrados. O presente trabalho tem por objetivo, primeiramente, oferecer uma visão atualizada do estado da arte na área de modelagem de workflow baseada em redes de Petri e expor um exemplo de modelo de workflow com parâmetros de tempo e custo associados às transições da rede. O objetivo secundário é apresentar conceitos importantes de redes de Petri, workflow e rotas de processos.Unfortunately these systems and techniques do not have well-defined syntax and semantic, which makes harder the complex analysis of models. In this case, Petri nets have excellent potential to solve the problem, once they present graphic representation and easy understanding. They are used as a communication language among expert people in different areas, and may allow the description of static and dynamic aspects of the systems that have to be represented. Also, they have mathematic formalism, which make possibly the use of the analysis methods. The objective of this work is to present the potential of Petri nets in studies of Enterprise Modelling and Workflow, showing an example of application, with time and cost parameters.

VisTrails is an open-source scientific workflow and provenance management system

CSIR Research Space (South Africa)

Mthombeni, Thabo DM

2011-12-01

Full Text Available VisTrails is an open-source scientific workflow and provenance management system that provides support for simulations, data exploration and visualization. Whereas workflows have been traditionally used to automate repetitive tasks, for applications...

Model-based Vestibular Afferent Stimulation: Modular Workflow for Analyzing Stimulation Scenarios in Patient Specific and Statistical Vestibular Anatomy

Directory of Open Access Journals (Sweden)

Michael Handler

2017-12-01

Full Text Available Our sense of balance and spatial orientation strongly depends on the correct functionality of our vestibular system. Vestibular dysfunction can lead to blurred vision and impaired balance and spatial orientation, causing a significant decrease in quality of life. Recent studies have shown that vestibular implants offer a possible treatment for patients with vestibular dysfunction. The close proximity of the vestibular nerve bundles, the facial nerve and the cochlear nerve poses a major challenge to targeted stimulation of the vestibular system. Modeling the electrical stimulation of the vestibular system allows for an efficient analysis of stimulation scenarios previous to time and cost intensive in vivo experiments. Current models are based on animal data or CAD models of human anatomy. In this work, a (semi-automatic modular workflow is presented for the stepwise transformation of segmented vestibular anatomy data of human vestibular specimens to an electrical model and subsequently analyzed. The steps of this workflow include (i the transformation of labeled datasets to a tetrahedra mesh, (ii nerve fiber anisotropy and fiber computation as a basis for neuron models, (iii inclusion of arbitrary electrode designs, (iv simulation of quasistationary potential distributions, and (v analysis of stimulus waveforms on the stimulation outcome. Results obtained by the workflow based on human datasets and the average shape of a statistical model revealed a high qualitative agreement and a quantitatively comparable range compared to data from literature, respectively. Based on our workflow, a detailed analysis of intra- and extra-labyrinthine electrode configurations with various stimulation waveforms and electrode designs can be performed on patient specific anatomy, making this framework a valuable tool for current optimization questions concerning vestibular implants in humans.

Translating Unstructured Workflow Processes to Readable BPEL: Theory and Implementation

DEFF Research Database (Denmark)

van der Aalst, Willibrordus Martinus Pancratius; Lassen, Kristian Bisgaard

2008-01-01

and not easy to use by end-users. Therefore, we provide a mapping from Workflow Nets (WF-nets) to BPEL. This mapping builds on the rich theory of Petri nets and can also be used to map other languages (e.g., UML, EPC, BPMN, etc.) onto BPEL. In addition to this we have implemented the algorithm in a tool called...... WorkflowNet2BPEL4WS....

Workflow Based Software Development Environment, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The goal of this proposed research is to investigate and develop a workflow based tool, the Software Developers Assistant, to facilitate the collaboration between...

Workflow Based Software Development Environment, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The goal of this proposed research is to investigate and develop a workflow based tool, the Software Developers Assistant, to facilitate the collaboration between...

BIFI: a Taverna plugin for a simplified and user-friendly workflow platform.

Science.gov (United States)

Yildiz, Ahmet; Dilaveroglu, Erkan; Visne, Ilhami; Günay, Bilal; Sefer, Emrah; Weinhausel, Andreas; Rattay, Frank; Goble, Carole A; Pandey, Ram Vinay; Kriegner, Albert

2014-10-20

Heterogeneity in the features, input-output behaviour and user interface for available bioinformatics tools and services is still a bottleneck for both expert and non-expert users. Advancement in providing common interfaces over such tools and services are gaining interest among researchers. However, the lack of (meta-) information about input-output data and parameter prevents to provide automated and standardized solutions, which can assist users in setting the appropriate parameters. These limitations must be resolved especially in the workflow-based solution in order to ease the integration of software. We report a Taverna Workbench plugin: the XworX BIFI (Beautiful Interfaces for Inputs) implemented as a solution for the aforementioned issues. BIFI provides a Graphical User Interface (GUI) definition language used to layout the user interface and to define parameter options for Taverna workflows. BIFI is also able to submit GUI Definition Files (GDF) directly or discover appropriate instances from a configured repository. In the absence of a GDF, BIFI generates a default interface. The Taverna Workbench is an open source software providing the ability to combine various services within a workflow. Nevertheless, users can supply input data to the workflow via a simple user interface providing only a text area to enter the input in text form. The workflow may contain meta-information in human readable form such as description text for the port and an example value. However, not all workflow ports are documented so well or have all the required information.BIFI uses custom user interface components for ports which give users feedback on the parameter data type or structure to be used for service execution and enables client-side data validations. Moreover, BIFI offers user interfaces that allow users to interactively construct workflow views and share them with the community, thus significantly increasing usability of heterogeneous, distributed service

SwinDeW-C: A Peer-to-Peer Based Cloud Workflow System

Science.gov (United States)

Liu, Xiao; Yuan, Dong; Zhang, Gaofeng; Chen, Jinjun; Yang, Yun

Workflow systems are designed to support the process automation of large scale business and scientific applications. In recent years, many workflow systems have been deployed on high performance computing infrastructures such as cluster, peer-to-peer (p2p), and grid computing (Moore, 2004; Wang, Jie, & Chen, 2009; Yang, Liu, Chen, Lignier, & Jin, 2007). One of the driving forces is the increasing demand of large scale instance and data/computation intensive workflow applications (large scale workflow applications for short) which are common in both eBusiness and eScience application areas. Typical examples (will be detailed in Section 13.2.1) include such as the transaction intensive nation-wide insurance claim application process; the data and computation intensive pulsar searching process in Astrophysics. Generally speaking, instance intensive applications are those processes which need to be executed for a large number of times sequentially within a very short period or concurrently with a large number of instances (Liu, Chen, Yang, & Jin, 2008; Liu et al., 2010; Yang et al., 2008). Therefore, large scale workflow applications normally require the support of high performance computing infrastructures (e.g. advanced CPU units, large memory space and high speed network), especially when workflow activities are of data and computation intensive themselves. In the real world, to accommodate such a request, expensive computing infrastructures including such as supercomputers and data servers are bought, installed, integrated and maintained with huge cost by system users

Provenance-Based Debugging and Drill-Down in Data-Oriented Workflows

KAUST Repository

Ikeda, Robert

2012-04-01

Panda (for Provenance and Data) is a system that supports the creation and execution of data-oriented workflows, with automatic provenance generation and built-in provenance tracing operations. Workflows in Panda are arbitrary a cyclic graphs containing both relational (SQL) processing nodes and opaque processing nodes programmed in Python. For both types of nodes, Panda generates logical provenance - provenance information stored at the processing-node level - and uses the generated provenance to support record-level backward tracing and forward tracing operations. In our demonstration we use Panda to integrate, process, and analyze actual education data from multiple sources. We specifically demonstrate how Panda\\'s provenance generation and tracing capabilities can be very useful for workflow debugging, and for drilling down on specific results of interest. © 2012 IEEE.

Nexus: A modular workflow management system for quantum simulation codes

Science.gov (United States)

Krogel, Jaron T.

2016-01-01

The management of simulation workflows represents a significant task for the individual computational researcher. Automation of the required tasks involved in simulation work can decrease the overall time to solution and reduce sources of human error. A new simulation workflow management system, Nexus, is presented to address these issues. Nexus is capable of automated job management on workstations and resources at several major supercomputing centers. Its modular design allows many quantum simulation codes to be supported within the same framework. Current support includes quantum Monte Carlo calculations with QMCPACK, density functional theory calculations with Quantum Espresso or VASP, and quantum chemical calculations with GAMESS. Users can compose workflows through a transparent, text-based interface, resembling the input file of a typical simulation code. A usage example is provided to illustrate the process.

Workflow Optimization in Vertebrobasilar Occlusion

International Nuclear Information System (INIS)

Kamper, Lars; Meyn, Hannes; Rybacki, Konrad; Nordmeyer, Simone; Kempkes, Udo; Piroth, Werner; Isenmann, Stefan; Haage, Patrick

2012-01-01

Objective: In vertebrobasilar occlusion, rapid recanalization is the only substantial means to improve the prognosis. We introduced a standard operating procedure (SOP) for interventional therapy to analyze the effects on interdisciplinary time management. Methods: Intrahospital time periods between hospital admission and neuroradiological intervention were retrospectively analyzed, together with the patients’ outcome, before (n = 18) and after (n = 20) implementation of the SOP. Results: After implementation of the SOP, we observed statistically significant improvement of postinterventional patient neurological status (p = 0.017). In addition, we found a decrease of 5:33 h for the mean time period from hospital admission until neuroradiological intervention. The recanalization rate increased from 72.2% to 80% after implementation of the SOP. Conclusion: Our results underscore the relevance of SOP implementation and analysis of time management for clinical workflow optimization. Both may trigger awareness for the need of efficient interdisciplinary time management. This could be an explanation for the decreased time periods and improved postinterventional patient status after SOP implementation.

Introducing W.A.T.E.R.S.: a workflow for the alignment, taxonomy, and ecology of ribosomal sequences.

Science.gov (United States)

Hartman, Amber L; Riddle, Sean; McPhillips, Timothy; Ludäscher, Bertram; Eisen, Jonathan A

2010-06-12

For more than two decades microbiologists have used a highly conserved microbial gene as a phylogenetic marker for bacteria and archaea. The small-subunit ribosomal RNA gene, also known as 16 S rRNA, is encoded by ribosomal DNA, 16 S rDNA, and has provided a powerful comparative tool to microbial ecologists. Over time, the microbial ecology field has matured from small-scale studies in a select number of environments to massive collections of sequence data that are paired with dozens of corresponding collection variables. As the complexity of data and tool sets have grown, the need for flexible automation and maintenance of the core processes of 16 S rDNA sequence analysis has increased correspondingly. We present WATERS, an integrated approach for 16 S rDNA analysis that bundles a suite of publicly available 16 S rDNA analysis software tools into a single software package. The "toolkit" includes sequence alignment, chimera removal, OTU determination, taxonomy assignment, phylogentic tree construction as well as a host of ecological analysis and visualization tools. WATERS employs a flexible, collection-oriented 'workflow' approach using the open-source Kepler system as a platform. By packaging available software tools into a single automated workflow, WATERS simplifies 16 S rDNA analyses, especially for those without specialized bioinformatics, programming expertise. In addition, WATERS, like some of the newer comprehensive rRNA analysis tools, allows researchers to minimize the time dedicated to carrying out tedious informatics steps and to focus their attention instead on the biological interpretation of the results. One advantage of WATERS over other comprehensive tools is that the use of the Kepler workflow system facilitates result interpretation and reproducibility via a data provenance sub-system. Furthermore, new "actors" can be added to the workflow as desired and we see WATERS as an initial seed for a sizeable and growing repository of interoperable

Workflow Automation: A Collective Case Study

Science.gov (United States)

Harlan, Jennifer

2013-01-01

Knowledge management has proven to be a sustainable competitive advantage for many organizations. Knowledge management systems are abundant, with multiple functionalities. The literature reinforces the use of workflow automation with knowledge management systems to benefit organizations; however, it was not known if process automation yielded…

Formalizing an integrative, multidisciplinary cancer therapy discovery workflow

Science.gov (United States)

McGuire, Mary F.; Enderling, Heiko; Wallace, Dorothy I.; Batra, Jaspreet; Jordan, Marie; Kumar, Sushil; Panetta, John C.; Pasquier, Eddy

2014-01-01

Although many clinicians and researchers work to understand cancer, there has been limited success to effectively combine forces and collaborate over time, distance, data and budget constraints. Here we present a workflow template for multidisciplinary cancer therapy that was developed during the 2nd Annual Workshop on Cancer Systems Biology sponsored by Tufts University, Boston, MA in July 2012. The template was applied to the development of a metronomic therapy backbone for neuroblastoma. Three primary groups were identified: clinicians, biologists, and scientists (mathematicians, computer scientists, physicists and engineers). The workflow described their integrative interactions; parallel or sequential processes; data sources and computational tools at different stages as well as the iterative nature of therapeutic development from clinical observations to in vitro, in vivo, and clinical trials. We found that theoreticians in dialog with experimentalists could develop calibrated and parameterized predictive models that inform and formalize sets of testable hypotheses, thus speeding up discovery and validation while reducing laboratory resources and costs. The developed template outlines an interdisciplinary collaboration workflow designed to systematically investigate the mechanistic underpinnings of a new therapy and validate that therapy to advance development and clinical acceptance. PMID:23955390

Improved compliance by BPM-driven workflow automation.

Science.gov (United States)

Holzmüller-Laue, Silke; Göde, Bernd; Fleischer, Heidi; Thurow, Kerstin

2014-12-01

Using methods and technologies of business process management (BPM) for the laboratory automation has important benefits (i.e., the agility of high-level automation processes, rapid interdisciplinary prototyping and implementation of laboratory tasks and procedures, and efficient real-time process documentation). A principal goal of the model-driven development is the improved transparency of processes and the alignment of process diagrams and technical code. First experiences of using the business process model and notation (BPMN) show that easy-to-read graphical process models can achieve and provide standardization of laboratory workflows. The model-based development allows one to change processes quickly and an easy adaption to changing requirements. The process models are able to host work procedures and their scheduling in compliance with predefined guidelines and policies. Finally, the process-controlled documentation of complex workflow results addresses modern laboratory needs of quality assurance. BPMN 2.0 as an automation language to control every kind of activity or subprocess is directed to complete workflows in end-to-end relationships. BPMN is applicable as a system-independent and cross-disciplinary graphical language to document all methods in laboratories (i.e., screening procedures or analytical processes). That means, with the BPM standard, a communication method of sharing process knowledge of laboratories is also available. © 2014 Society for Laboratory Automation and Screening.

Implementing an excellence in teaching recognition system: needs analysis and recommendations.

Science.gov (United States)

Schindler, Nancy; Corcoran, Julia C; Miller, Megan; Wang, Chih-Hsiung; Roggin, Kevin; Posner, Mitchell; Fryer, Jonathan; DaRosa, Debra A

2013-01-01

Teaching awards have been suggested to serve a variety of purposes. The specific characteristics of teaching awards and the associated effectiveness at achieving planned purposes are poorly understood. A needs analysis was performed to inform recommendations for an Excellence in Teaching Recognition System to meet the needs of surgical education leadership. We performed a 2-part needs analysis beginning with a review of the literature. We then, developed, piloted, and administered a survey instrument to General Surgery program leaders. The survey examined the features and perceived effectiveness of existing teaching awards systems. A multi-institution committee of program directors, clerkship directors, and Vice-Chairs of education then met to identify goals and develop recommendations for implementation of an "Excellence in Teaching Recognition System." There is limited evidence demonstrating effectiveness of existing teaching awards in medical education. Evidence supports the ability of such awards to demonstrate value placed on teaching, to inspire faculty to teach, and to contribute to promotion. Survey findings indicate that existing awards strive to achieve these purposes and that educational leaders believe awards have the potential to do this and more. Leaders are moderately satisfied with existing awards for providing recognition and demonstrating value placed on teaching, but they are less satisfied with awards for motivating faculty to participate in teaching or for contributing to promotion. Most departments and institutions honor only a few recipients annually. There is a paucity of literature addressing teaching recognition systems in medical education and little evidence to support the success of such systems in achieving their intended purposes. The ability of awards to affect outcomes such as participation in teaching and promotion may be limited by the small number of recipients for most existing awards. We propose goals for a Teaching Recognition

McRunjob: A High Energy Physics Workflow Planner for Grid Production Processing

CERN Document Server

Graham, G E; Bertram, I; Graham, Gregory E.; Evans, Dave; Bertram, Iain

2003-01-01

McRunjob is a powerful grid workflow manager used to manage the generation of large numbers of production processing jobs in High Energy Physics. In use at both the DZero and CMS experiments, McRunjob has been used to manage large Monte Carlo production processing since 1999 and is being extended to uses in regular production processing for analysis and reconstruction. Described at CHEP 2001, McRunjob converts core metadata into jobs submittable in a variety of environments. The powerful core metadata description language includes methods for converting the metadata into persistent forms, job descriptions, multi-step workflows, and data provenance information. The language features allow for structure in the metadata by including full expressions, namespaces, functional dependencies, site specific parameters in a grid environment, and ontological definitions. It also has simple control structures for parallelization of large jobs. McRunjob features a modular design which allows for easy expansion to new job d...

BIM Workflow for Mechanical Ventilation Design : Object-Based Modeling with Autodesk Revit®

OpenAIRE

Bonduel, Mathias

2016-01-01

This study is conducted for the Belgian engineering firm CENERGIE, whose main business activities are within the fields of building systems and sustainable buildings. The company wants to change their current design workflows to adapt the use of Building Information Modeling (BIM) with Autodesk Revit The research focused on the development of a BIM workflow where no models are exchanged between building partners. The aim of this study was to develop such a Revit BIM workflow for the desig...

Soundness of Timed-Arc Workflow Nets

DEFF Research Database (Denmark)

Mateo, Jose Antonio; Srba, Jiri; Sørensen, Mathias Grund

2014-01-01

, we demonstrate the usability of our theory on the case studies of a Brake System Control Unit used in aircraft certification, the MPEG2 encoding algorithm, and a blood transfusion workflow. The implementation of the algorithms is freely available as a part of the model checker TAPAAL....

Observing health professionals' workflow patterns for diabetes care - First steps towards an ontology for EHR services.

Science.gov (United States)

Schweitzer, M; Lasierra, N; Hoerbst, A

2015-01-01

Increasing the flexibility from a user-perspective and enabling a workflow based interaction, facilitates an easy user-friendly utilization of EHRs for healthcare professionals' daily work. To offer such versatile EHR-functionality, our approach is based on the execution of clinical workflows by means of a composition of semantic web-services. The backbone of such architecture is an ontology which enables to represent clinical workflows and facilitates the selection of suitable services. In this paper we present the methods and results after running observations of diabetes routine consultations which were conducted in order to identify those workflows and the relation among the included tasks. Mentioned workflows were first modeled by BPMN and then generalized. As a following step in our study, interviews will be conducted with clinical personnel to validate modeled workflows.

Images crossing borders: image and workflow sharing on multiple levels.

Science.gov (United States)

Ross, Peeter; Pohjonen, Hanna

2011-04-01

Digitalisation of medical data makes it possible to share images and workflows between related parties. In addition to linear data flow where healthcare professionals or patients are the information carriers, a new type of matrix of many-to-many connections is emerging. Implementation of shared workflow brings challenges of interoperability and legal clarity. Sharing images or workflows can be implemented on different levels with different challenges: inside the organisation, between organisations, across country borders, or between healthcare institutions and citizens. Interoperability issues vary according to the level of sharing and are either technical or semantic, including language. Legal uncertainty increases when crossing national borders. Teleradiology is regulated by multiple European Union (EU) directives and legal documents, which makes interpretation of the legal system complex. To achieve wider use of eHealth and teleradiology several strategic documents were published recently by the EU. Despite EU activities, responsibility for organising, providing and funding healthcare systems remains with the Member States. Therefore, the implementation of new solutions requires strong co-operation between radiologists, societies of radiology, healthcare administrators, politicians and relevant EU authorities. The aim of this article is to describe different dimensions of image and workflow sharing and to analyse legal acts concerning teleradiology in the EU.

Improving Radiology Workflow with Automated Examination Tracking and Alerts.

Science.gov (United States)

Pianykh, Oleg S; Jaworsky, Christina; Shore, M T; Rosenthal, Daniel I

2017-07-01

The modern radiology workflow is a production line where imaging examinations pass in sequence through many steps. In busy clinical environments, even a minor delay in any step can propagate through the system and significantly lengthen the examination process. This is particularly true for the tasks delegated to the human operators, who may be distracted or stressed. We have developed an application to track examinations through a critical part of the workflow, from the image-acquisition scanners to the PACS archive. Our application identifies outliers and actively alerts radiology managers about the need to resolve these problems as soon as they happen. In this study, we investigate how this real-time tracking and alerting affected the speed of examination delivery to the radiologist. We demonstrate that active alerting produced a 3-fold reduction of examination-to-PACS delays. Additionally, we discover an overall improvement in examination-to-PACS delivery, evidence that the tracking and alerts instill a culture where timely processing is essential. By providing supervisors with information about exactly where delays emerge in their workflow and alerting the correct staff to take action, applications like ours create more robust radiology workflow with predictable, timely outcomes. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

An observation tool for studying patient-oriented workflow in hospital emergency departments.

Science.gov (United States)

Ozkaynak, M; Brennan, P

2013-01-01

Studying workflow is a critical step in designing, implementing and evaluating informatics interventions in complex sociotechnical settings, such as hospital emergency departments (EDs). Known approaches to studying workflow in clinical settings attend to the activities of individual clinicians, thus being inadequate to characterize patient care as a cooperative work. The purpose of this paper is twofold. First, we introduce a novel, theory-driven patient-oriented workflow methodology, which better addresses the complex, multiple-provider nature of patient care. Second, we report the development of an observational tool and protocol for use in studies of this type, and the results of an evaluation study. We created a tablet computer implementation of an instrument to efficiently capture patient-oriented workflow, and evaluated it through a field study in three EDs. We focused on activities occurring over time during a single patient care episode as well as the roles of the ED staff members who conducted the activities. The evidence generated supports the validity, viability, and reliability of the tool. The coverage of the tool in terms of activities and roles was satisfactory. The tool was able to capture the sequence of activity-role pairs for 108 patient care episodes. The inter-rater reliability assessment yielded a high kappa value (0.79). The patient-oriented workflow methodology has the potential to facilitate modeling patient care in EDs by characterizing both roles and activities in sequence. The methodology also provides researchers and practitioners a more realistic and comprehensive workflow perspective that can inform the design, implementation and evaluation of health information technology interventions.

High‐resolution trench photomosaics from image‐based modeling: Workflow and error analysis

Science.gov (United States)

Reitman, Nadine G.; Bennett, Scott E. K.; Gold, Ryan D.; Briggs, Richard; Duross, Christopher

2015-01-01

Photomosaics are commonly used to construct maps of paleoseismic trench exposures, but the conventional process of manually using image‐editing software is time consuming and produces undesirable artifacts and distortions. Herein, we document and evaluate the application of image‐based modeling (IBM) for creating photomosaics and 3D models of paleoseismic trench exposures, illustrated with a case‐study trench across the Wasatch fault in Alpine, Utah. Our results include a structure‐from‐motion workflow for the semiautomated creation of seamless, high‐resolution photomosaics designed for rapid implementation in a field setting. Compared with conventional manual methods, the IBM photomosaic method provides a more accurate, continuous, and detailed record of paleoseismic trench exposures in approximately half the processing time and 15%–20% of the user input time. Our error analysis quantifies the effect of the number and spatial distribution of control points on model accuracy. For this case study, an ∼87  m2 exposure of a benched trench photographed at viewing distances of 1.5–7 m yields a model with <2  cm root mean square error (rmse) with as few as six control points. Rmse decreases as more control points are implemented, but the gains in accuracy are minimal beyond 12 control points. Spreading control points throughout the target area helps to minimize error. We propose that 3D digital models and corresponding photomosaics should be standard practice in paleoseismic exposure archiving. The error analysis serves as a guide for future investigations that seek balance between speed and accuracy during photomosaic and 3D model construction.

iLAP: a workflow-driven software for experimental protocol development, data acquisition and analysis

Directory of Open Access Journals (Sweden)

McNally James

2009-01-01

Full Text Available Abstract Background In recent years, the genome biology community has expended considerable effort to confront the challenges of managing heterogeneous data in a structured and organized way and developed laboratory information management systems (LIMS for both raw and processed data. On the other hand, electronic notebooks were developed to record and manage scientific data, and facilitate data-sharing. Software which enables both, management of large datasets and digital recording of laboratory procedures would serve a real need in laboratories using medium and high-throughput techniques. Results We have developed iLAP (Laboratory data management, Analysis, and Protocol development, a workflow-driven information management system specifically designed to create and manage experimental protocols, and to analyze and share laboratory data. The system combines experimental protocol development, wizard-based data acquisition, and high-throughput data analysis into a single, integrated system. We demonstrate the power and the flexibility of the platform using a microscopy case study based on a combinatorial multiple fluorescence in situ hybridization (m-FISH protocol and 3D-image reconstruction. iLAP is freely available under the open source license AGPL from http://genome.tugraz.at/iLAP/. Conclusion iLAP is a flexible and versatile information management system, which has the potential to close the gap between electronic notebooks and LIMS and can therefore be of great value for a broad scientific community.

A data model for analyzing user collaborations in workflow-driven e-Science

NARCIS (Netherlands)

Altintas, I.; Anand, M.K.; Vuong, T.N.; Bowers, S.; Ludäscher, B.; Sloot, P.M.A.

2011-01-01

Scientific discoveries are often the result of methodical execution of many interrelated scientific workflows, where workflows and datasets published by one set of users can be used by other users to perform subsequent analyses, leading to implicit or explicit collaboration. In this paper, we

Using workflows to explore and optimise named entity recognition for chemistry.

Directory of Open Access Journals (Sweden)

Balakrishna Kolluru

Full Text Available Chemistry text mining tools should be interoperable and adaptable regardless of system-level implementation, installation or even programming issues. We aim to abstract the functionality of these tools from the underlying implementation via reconfigurable workflows for automatically identifying chemical names. To achieve this, we refactored an established named entity recogniser (in the chemistry domain, OSCAR and studied the impact of each component on the net performance. We developed two reconfigurable workflows from OSCAR using an interoperable text mining framework, U-Compare. These workflows can be altered using the drag-&-drop mechanism of the graphical user interface of U-Compare. These workflows also provide a platform to study the relationship between text mining components such as tokenisation and named entity recognition (using maximum entropy Markov model (MEMM and pattern recognition based classifiers. Results indicate that, for chemistry in particular, eliminating noise generated by tokenisation techniques lead to a slightly better performance than others, in terms of named entity recognition (NER accuracy. Poor tokenisation translates into poorer input to the classifier components which in turn leads to an increase in Type I or Type II errors, thus, lowering the overall performance. On the Sciborg corpus, the workflow based system, which uses a new tokeniser whilst retaining the same MEMM component, increases the F-score from 82.35% to 84.44%. On the PubMed corpus, it recorded an F-score of 84.84% as against 84.23% by OSCAR.

Cloud-based bioinformatics workflow platform for large-scale next-generation sequencing analyses.

Science.gov (United States)

Liu, Bo; Madduri, Ravi K; Sotomayor, Borja; Chard, Kyle; Lacinski, Lukasz; Dave, Utpal J; Li, Jianqiang; Liu, Chunchen; Foster, Ian T

2014-06-01

Due to the upcoming data deluge of genome data, the need for storing and processing large-scale genome data, easy access to biomedical analyses tools, efficient data sharing and retrieval has presented significant challenges. The variability in data volume results in variable computing and storage requirements, therefore biomedical researchers are pursuing more reliable, dynamic and convenient methods for conducting sequencing analyses. This paper proposes a Cloud-based bioinformatics workflow platform for large-scale next-generation sequencing analyses, which enables reliable and highly scalable execution of sequencing analyses workflows in a fully automated manner. Our platform extends the existing Galaxy workflow system by adding data management capabilities for transferring large quantities of data efficiently and reliably (via Globus Transfer), domain-specific analyses tools preconfigured for immediate use by researchers (via user-specific tools integration), automatic deployment on Cloud for on-demand resource allocation and pay-as-you-go pricing (via Globus Provision), a Cloud provisioning tool for auto-scaling (via HTCondor scheduler), and the support for validating the correctness of workflows (via semantic verification tools). Two bioinformatics workflow use cases as well as performance evaluation are presented to validate the feasibility of the proposed approach. Copyright © 2014 Elsevier Inc. All rights reserved.

Workflow for high-content, individual cell quantification of fluorescent markers from universal microscope data, supported by open source software.

Science.gov (United States)

Stockwell, Simon R; Mittnacht, Sibylle

2014-12-16

Advances in understanding the control mechanisms governing the behavior of cells in adherent mammalian tissue culture models are becoming increasingly dependent on modes of single-cell analysis. Methods which deliver composite data reflecting the mean values of biomarkers from cell populations risk losing subpopulation dynamics that reflect the heterogeneity of the studied biological system. In keeping with this, traditional approaches are being replaced by, or supported with, more sophisticated forms of cellular assay developed to allow assessment by high-content microscopy. These assays potentially generate large numbers of images of fluorescent biomarkers, which enabled by accompanying proprietary software packages, allows for multi-parametric measurements per cell. However, the relatively high capital costs and overspecialization of many of these devices have prevented their accessibility to many investigators. Described here is a universally applicable workflow for the quantification of multiple fluorescent marker intensities from specific subcellular regions of individual cells suitable for use with images from most fluorescent microscopes. Key to this workflow is the implementation of the freely available Cell Profiler software(1) to distinguish individual cells in these images, segment them into defined subcellular regions and deliver fluorescence marker intensity values specific to these regions. The extraction of individual cell intensity values from image data is the central purpose of this workflow and will be illustrated with the analysis of control data from a siRNA screen for G1 checkpoint regulators in adherent human cells. However, the workflow presented here can be applied to analysis of data from other means of cell perturbation (e.g., compound screens) and other forms of fluorescence based cellular markers and thus should be useful for a wide range of laboratories.

Integrating workflow and project management systems for PLM applications

Directory of Open Access Journals (Sweden)

Fabio Fonseca Pereira de Paula

2008-07-01

Full Text Available The adoption of Product Life-cycle Management Systems (PLMs concept is fundamental to improve the product development, mainly to small and medium enterprises (SMEs. One of the challenges is the integration between project management and product data management functions. The paper presents an analysis of the potential integration strategies for a specifics product data management system (SMARTEAM and a project management system (Microsoft Project, which are commonly used for SMEs. Finally the article presents some considerations about the study of Project Management solutions in SMB’s companies, considering the PLM approach. Key-words: integration, project management (PM, workflow, PDM, PLM.

A standard-enabled workflow for synthetic biology

KAUST Repository

Myers, Chris J.; Beal, Jacob; Gorochowski, Thomas E.; Kuwahara, Hiroyuki; Madsen, Curtis; McLaughlin, James Alastair; Mısırlı, Gö ksel; Nguyen, Tramy; Oberortner, Ernst; Samineni, Meher; Wipat, Anil; Zhang, Michael; Zundel, Zach

2017-01-01

A synthetic biology workflow is composed of data repositories that provide information about genetic parts, sequence-level design tools to compose these parts into circuits, visualization tools to depict these designs, genetic design tools to select

Multi-Objective Approach for Energy-Aware Workflow Scheduling in Cloud Computing Environments

Directory of Open Access Journals (Sweden)

Sonia Yassa

2013-01-01

Full Text Available We address the problem of scheduling workflow applications on heterogeneous computing systems like cloud computing infrastructures. In general, the cloud workflow scheduling is a complex optimization problem which requires considering different criteria so as to meet a large number of QoS (Quality of Service requirements. Traditional research in workflow scheduling mainly focuses on the optimization constrained by time or cost without paying attention to energy consumption. The main contribution of this study is to propose a new approach for multi-objective workflow scheduling in clouds, and present the hybrid PSO algorithm to optimize the scheduling performance. Our method is based on the Dynamic Voltage and Frequency Scaling (DVFS technique to minimize energy consumption. This technique allows processors to operate in different voltage supply levels by sacrificing clock frequencies. This multiple voltage involves a compromise between the quality of schedules and energy. Simulation results on synthetic and real-world scientific applications highlight the robust performance of the proposed approach.

Multi-Objective Approach for Energy-Aware Workflow Scheduling in Cloud Computing Environments

Science.gov (United States)

Kadima, Hubert; Granado, Bertrand

2013-01-01

We address the problem of scheduling workflow applications on heterogeneous computing systems like cloud computing infrastructures. In general, the cloud workflow scheduling is a complex optimization problem which requires considering different criteria so as to meet a large number of QoS (Quality of Service) requirements. Traditional research in workflow scheduling mainly focuses on the optimization constrained by time or cost without paying attention to energy consumption. The main contribution of this study is to propose a new approach for multi-objective workflow scheduling in clouds, and present the hybrid PSO algorithm to optimize the scheduling performance. Our method is based on the Dynamic Voltage and Frequency Scaling (DVFS) technique to minimize energy consumption. This technique allows processors to operate in different voltage supply levels by sacrificing clock frequencies. This multiple voltage involves a compromise between the quality of schedules and energy. Simulation results on synthetic and real-world scientific applications highlight the robust performance of the proposed approach. PMID:24319361

Differentiated protection services with failure probability guarantee for workflow-based applications

Science.gov (United States)

Zhong, Yaoquan; Guo, Wei; Jin, Yaohui; Sun, Weiqiang; Hu, Weisheng

2010-12-01

A cost-effective and service-differentiated provisioning strategy is very desirable to service providers so that they can offer users satisfactory services, while optimizing network resource allocation. Providing differentiated protection services to connections for surviving link failure has been extensively studied in recent years. However, the differentiated protection services for workflow-based applications, which consist of many interdependent tasks, have scarcely been studied. This paper investigates the problem of providing differentiated services for workflow-based applications in optical grid. In this paper, we develop three differentiated protection services provisioning strategies which can provide security level guarantee and network-resource optimization for workflow-based applications. The simulation demonstrates that these heuristic algorithms provide protection cost-effectively while satisfying the applications' failure probability requirements.

A Validation Approach of an End-to-End Whole Genome Sequencing Workflow for Source Tracking of Listeria monocytogenes and Salmonella enterica

Directory of Open Access Journals (Sweden)

Anne-Catherine Portmann

2018-03-01

Full Text Available Whole genome sequencing (WGS, using high throughput sequencing technology, reveals the complete sequence of the bacterial genome in a few days. WGS is increasingly being used for source tracking, pathogen surveillance and outbreak investigation due to its high discriminatory power. In the food industry, WGS used for source tracking is beneficial to support contamination investigations. Despite its increased use, no standards or guidelines are available today for the use of WGS in outbreak and/or trace-back investigations. Here we present a validation of our complete (end-to-end WGS workflow for Listeria monocytogenes and Salmonella enterica including: subculture of isolates, DNA extraction, sequencing and bioinformatics analysis. This end-to-end WGS workflow was evaluated according to the following performance criteria: stability, repeatability, reproducibility, discriminatory power, and epidemiological concordance. The current study showed that few single nucleotide polymorphism (SNPs were observed for L. monocytogenes and S. enterica when comparing genome sequences from five independent colonies from the first subculture and five independent colonies after the tenth subculture. Consequently, the stability of the WGS workflow for L. monocytogenes and S. enterica was demonstrated despite the few genomic variations that can occur during subculturing steps. Repeatability and reproducibility were also demonstrated. The WGS workflow was shown to have a high discriminatory power and has the ability to show genetic relatedness. Additionally, the WGS workflow was able to reproduce published outbreak investigation results, illustrating its capability of showing epidemiological concordance. The current study proposes a validation approach comprising all steps of a WGS workflow and demonstrates that the workflow can be applied to L. monocytogenes or S. enterica.

Toward Exascale Seismic Imaging: Taming Workflow and I/O Issues

Science.gov (United States)

Lefebvre, M. P.; Bozdag, E.; Lei, W.; Rusmanugroho, H.; Smith, J. A.; Tromp, J.; Yuan, Y.

2013-12-01

Providing a better understanding of the physics and chemistry of Earth's interior through numerical simulations has always required tremendous computational resources. Post-petascale supercomputers are now available to solve complex scientific problems that were thought unreachable a few decades ago. They also bring a cohort of concerns on how to obtain optimum performance. Several issues are currently being investigated by the HPC community. To name a few, we can list energy consumption, fault resilience, scalability of the current parallel paradigms, large workflow management, I/O performance and feature extraction with large datasets. For this presentation, we focus on the last three issues. In the context of seismic imaging, in particular for simulations based on adjoint methods, workflows are well defined. They consist of a few collective steps (e.g., mesh generation or model updates) and of a large number of independent steps (e.g., forward and adjoint simulations of each seismic event, pre- and postprocessing of seismic traces). The greater goal is to reduce the time to solution, that is, obtaining a more precise representation of the subsurface as fast as possible. This brings us to consider both the workflow in its entirety and the parts composing it. The usual approach is to speedup the purely computational parts by code tuning in order to reach higher FLOPS and better memory usage. This still remains an important concern, but larger scale experiments show that the imaging workflow suffers from a severe I/O bottleneck. This limitation occurs both for purely computational data and seismic time series. The latter are dealt with by the introduction of a new Adaptable Seismic Data Format (ASDF). In both cases, a parallel I/O library, ORNL's ADIOS, is used to drastically lessen the weight of disk access. Moreover, parallel visualization tools, such as VisIt, are able to take advantage of the metadata included in our ADIOS outputs to extract features and

IT-benchmarking of clinical workflows: concept, implementation, and evaluation.

Science.gov (United States)

Thye, Johannes; Straede, Matthias-Christopher; Liebe, Jan-David; Hübner, Ursula

2014-01-01

Due to the emerging evidence of health IT as opportunity and risk for clinical workflows, health IT must undergo a continuous measurement of its efficacy and efficiency. IT-benchmarks are a proven means for providing this information. The aim of this study was to enhance the methodology of an existing benchmarking procedure by including, in particular, new indicators of clinical workflows and by proposing new types of visualisation. Drawing on the concept of information logistics, we propose four workflow descriptors that were applied to four clinical processes. General and specific indicators were derived from these descriptors and processes. 199 chief information officers (CIOs) took part in the benchmarking. These hospitals were assigned to reference groups of a similar size and ownership from a total of 259 hospitals. Stepwise and comprehensive feedback was given to the CIOs. Most participants who evaluated the benchmark rated the procedure as very good, good, or rather good (98.4%). Benchmark information was used by CIOs for getting a general overview, advancing IT, preparing negotiations with board members, and arguing for a new IT project.

Automated quality control in a file-based broadcasting workflow

Science.gov (United States)

Zhang, Lina

2014-04-01

Benefit from the development of information and internet technologies, television broadcasting is transforming from inefficient tape-based production and distribution to integrated file-based workflows. However, no matter how many changes have took place, successful broadcasting still depends on the ability to deliver a consistent high quality signal to the audiences. After the transition from tape to file, traditional methods of manual quality control (QC) become inadequate, subjective, and inefficient. Based on China Central Television's full file-based workflow in the new site, this paper introduces an automated quality control test system for accurate detection of hidden troubles in media contents. It discusses the system framework and workflow control when the automated QC is added. It puts forward a QC criterion and brings forth a QC software followed this criterion. It also does some experiments on QC speed by adopting parallel processing and distributed computing. The performance of the test system shows that the adoption of automated QC can make the production effective and efficient, and help the station to achieve a competitive advantage in the media market.

Implementation of a Workflow Management System for Non-Expert Users

DEFF Research Database (Denmark)

Jongejan, Bart

2016-01-01

tools, the CLARIN-DK workflow management system (WMS) computes combinations of tools that will give the desired result. This advanced functionality was originally not envisaged, but came within reach by writing the WMS partly in Java and partly in a programming language for symbolic computation, Bracmat....... Handling LT tool profiles, including the computation of workflows, is easier with Bracmat's language constructs for tree pattern matching and tree construction than with the language constructs offered by mainstream programming languages....

CMS Data Processing Workflows during an Extended Cosmic Ray Run

CERN Document Server

Chatrchyan, S; Sirunyan, A M; Adam, W; Arnold, B; Bergauer, H; Bergauer, T; Dragicevic, M; Eichberger, M; Erö, J; Friedl, M; Frühwirth, R; Ghete, V M; Hammer, J; Hänsel, S; Hoch, M; Hörmann, N; Hrubec, J; Jeitler, M; Kasieczka, G; Kastner, K; Krammer, M; Liko, D; Magrans de Abril, I; Mikulec, I; Mittermayr, F; Neuherz, B; Oberegger, M; Padrta, M; Pernicka, M; Rohringer, H; Schmid, S; Schöfbeck, R; Schreiner, T; Stark, R; Steininger, H; Strauss, J; Taurok, A; Teischinger, F; Themel, T; Uhl, D; Wagner, P; Waltenberger, W; Walzel, G; Widl, E; Wulz, C E; Chekhovsky, V; Dvornikov, O; Emeliantchik, I; Litomin, A; Makarenko, V; Marfin, I; Mossolov, V; Shumeiko, N; Solin, A; Stefanovitch, R; Suarez Gonzalez, J; Tikhonov, A; Fedorov, A; Karneyeu, A; Korzhik, M; Panov, V; Zuyeuski, R; Kuchinsky, P; Beaumont, W; Benucci, L; Cardaci, M; De Wolf, E A; Delmeire, E; Druzhkin, D; Hashemi, M; Janssen, X; Maes, T; Mucibello, L; Ochesanu, S; Rougny, R; Selvaggi, M; Van Haevermaet, H; Van Mechelen, P; Van Remortel, N; Adler, V; Beauceron, S; Blyweert, S; D'Hondt, J; De Weirdt, S; Devroede, O; Heyninck, J; Kalogeropoulos, A; Maes, J; Maes, M; Mozer, M U; Tavernier, S; Van Doninck, W; Van Mulders, P; Villella, I; Bouhali, O; Chabert, E C; Charaf, O; Clerbaux, B; De Lentdecker, G; Dero, V; Elgammal, S; Gay, A P R; Hammad, G H; Marage, P E; Rugovac, S; Vander Velde, C; Vanlaer, P; Wickens, J; Grunewald, M; Klein, B; Marinov, A; Ryckbosch, D; Thyssen, F; Tytgat, M; Vanelderen, L; Verwilligen, P; Basegmez, S; Bruno, G; Caudron, J; Delaere, C; Demin, P; Favart, D; Giammanco, A; Grégoire, G; Lemaitre, V; Militaru, O; Ovyn, S; Piotrzkowski, K; Quertenmont, L; Schul, N; Beliy, N; Daubie, E; Alves, G A; Pol, M E; Souza, M H G; Carvalho, W; De Jesus Damiao, D; De Oliveira Martins, C; Fonseca De Souza, S; Mundim, L; Oguri, V; Santoro, A; Silva Do Amaral, S M; Sznajder, A; Fernandez Perez Tomei, T R; Ferreira Dias, M A; Gregores, E M; Novaes, S F; Abadjiev, K; Anguelov, T; Damgov, J; Darmenov, N; Dimitrov, L; Genchev, V; Iaydjiev, P; Piperov, S; Stoykova, S; Sultanov, G; Trayanov, R; Vankov, I; Dimitrov, A; Dyulendarova, M; Kozhuharov, V; Litov, L; Marinova, E; Mateev, M; Pavlov, B; Petkov, P; Toteva, Z; Chen, G M; Chen, H S; Guan, W; Jiang, C H; Liang, D; Liu, B; Meng, X; Tao, J; Wang, J; Wang, Z; Xue, Z; Zhang, Z; Ban, Y; Cai, J; Ge, Y; Guo, S; Hu, Z; Mao, Y; Qian, S J; Teng, H; Zhu, B; Avila, C; Baquero Ruiz, M; Carrillo Montoya, C A; Gomez, A; Gomez Moreno, B; Ocampo Rios, A A; Osorio Oliveros, A F; Reyes Romero, D; Sanabria, J C; Godinovic, N; Lelas, K; Plestina, R; Polic, D; Puljak, I; Antunovic, Z; Dzelalija, M; Brigljevic, V; Duric, S; Kadija, K; Morovic, S; Fereos, R; Galanti, M; Mousa, J; Papadakis, A; Ptochos, F; Razis, P A; Tsiakkouri, D; Zinonos, Z; Hektor, A; Kadastik, M; Kannike, K; Müntel, M; Raidal, M; Rebane, L; Anttila, E; Czellar, S; Härkönen, J; Heikkinen, A; Karimäki, V; Kinnunen, R; Klem, J; Kortelainen, M J; Lampén, T; Lassila-Perini, K; Lehti, S; Lindén, T; Luukka, P; Mäenpää, T; Nysten, J; Tuominen, E; Tuominiemi, J; Ungaro, D; Wendland, L; Banzuzi, K; Korpela, A; Tuuva, T; Nedelec, P; Sillou, D; Besancon, M; Chipaux, R; Dejardin, M; Denegri, D; Descamps, J; Fabbro, B; Faure, J L; Ferri, F; Ganjour, S; Gentit, F X; Givernaud, A; Gras, P; Hamel de Monchenault, G; Jarry, P; Lemaire, M C; Locci, E; Malcles, J; Marionneau, M; Millischer, L; Rander, J; Rosowsky, A; Rousseau, D; Titov, M; Verrecchia, P; Baffioni, S; Bianchini, L; Bluj, M; Busson, P; Charlot, C; Dobrzynski, L; Granier de Cassagnac, R; Haguenauer, M; Miné, P; Paganini, P; Sirois, Y; Thiebaux, C; Zabi, A; Agram, J L; Besson, A; Bloch, D; Bodin, D; Brom, J M; Conte, E; Drouhin, F; Fontaine, J C; Gelé, D; Goerlach, U; Gross, L; Juillot, P; Le Bihan, A C; Patois, Y; Speck, J; Van Hove, P; Baty, C; Bedjidian, M; Blaha, J; Boudoul, G; Brun, H; Chanon, N; Chierici, R; Contardo, D; Depasse, P; Dupasquier, T; El Mamouni, H; Fassi, F; Fay, J; Gascon, S; Ille, B; Kurca, T; Le Grand, T; Lethuillier, M; Lumb, N; Mirabito, L; Perries, S; Vander Donckt, M; Verdier, P; Djaoshvili, N; Roinishvili, N; Roinishvili, V; Amaglobeli, N; Adolphi, R; Anagnostou, G; Brauer, R; Braunschweig, W; Edelhoff, M; Esser, H; Feld, L; Karpinski, W; Khomich, A; Klein, K; Mohr, N; Ostaptchouk, A; Pandoulas, D; Pierschel, G; Raupach, F; Schael, S; Schultz von Dratzig, A; Schwering, G; Sprenger, D; Thomas, M; Weber, M; Wittmer, B; Wlochal, M; Actis, O; Altenhöfer, G; Bender, W; Biallass, P; Erdmann, M; Fetchenhauer, G; Frangenheim, J; Hebbeker, T; Hilgers, G; Hinzmann, A; Hoepfner, K; Hof, C; Kirsch, M; Klimkovich, T; Kreuzer, P; Lanske, D; Merschmeyer, M; Meyer, A; Philipps, B; Pieta, H; Reithler, H; Schmitz, S A; Sonnenschein, L; Sowa, M; Steggemann, J; Szczesny, H; Teyssier, D; Zeidler, C; Bontenackels, M; Davids, M; Duda, M; Flügge, G; Geenen, H; Giffels, M; Haj Ahmad, W; Hermanns, T; Heydhausen, D; Kalinin, S; Kress, T; Linn, A; Nowack, A; Perchalla, L; Poettgens, M; Pooth, O; Sauerland, P; Stahl, A; Tornier, D; Zoeller, M H; Aldaya Martin, M; Behrens, U; Borras, K; Campbell, A; Castro, E; Dammann, D; Eckerlin, G; Flossdorf, A; Flucke, G; Geiser, A; Hatton, D; Hauk, J; Jung, H; Kasemann, M; Katkov, I; Kleinwort, C; Kluge, H; Knutsson, A; Kuznetsova, E; Lange, W; Lohmann, W; Mankel, R; Marienfeld, M; Meyer, A B; Miglioranzi, S; Mnich, J; Ohlerich, M; Olzem, J; Parenti, A; Rosemann, C; Schmidt, R; Schoerner-Sadenius, T; Volyanskyy, D; Wissing, C; Zeuner, W D; Autermann, C; Bechtel, F; Draeger, J; Eckstein, D; Gebbert, U; Kaschube, K; Kaussen, G; Klanner, R; Mura, B; Naumann-Emme, S; Nowak, F; Pein, U; Sander, C; Schleper, P; Schum, T; Stadie, H; Steinbrück, G; Thomsen, J; Wolf, R; Bauer, J; Blüm, P; Buege, V; Cakir, A; Chwalek, T; De Boer, W; Dierlamm, A; Dirkes, G; Feindt, M; Felzmann, U; Frey, M; Furgeri, A; Gruschke, J; Hackstein, C; Hartmann, F; Heier, S; Heinrich, M; Held, H; Hirschbuehl, D; Hoffmann, K H; Honc, S; Jung, C; Kuhr, T; Liamsuwan, T; Martschei, D; Mueller, S; Müller, Th; Neuland, M B; Niegel, M; Oberst, O; Oehler, A; Ott, J; Peiffer, T; Piparo, D; Quast, G; Rabbertz, K; Ratnikov, F; Ratnikova, N; Renz, M; Saout, C; Sartisohn, G; Scheurer, A; Schieferdecker, P; Schilling, F P; Schott, G; Simonis, H J; Stober, F M; Sturm, P; Troendle, D; Trunov, A; Wagner, W; Wagner-Kuhr, J; Zeise, M; Zhukov, V; Ziebarth, E B; Daskalakis, G; Geralis, T; Karafasoulis, K; Kyriakis, A; Loukas, D; Markou, A; Markou, C; Mavrommatis, C; Petrakou, E; Zachariadou, A; Gouskos, L; Katsas, P; Panagiotou, A; Evangelou, I; Kokkas, P; Manthos, N; Papadopoulos, I; Patras, V; Triantis, F A; Bencze, G; Boldizsar, L; Debreczeni, G; Hajdu, C; Hernath, S; Hidas, P; Horvath, D; Krajczar, K; Laszlo, A; Patay, G; Sikler, F; Toth, N; Vesztergombi, G; Beni, N; Christian, G; Imrek, J; Molnar, J; Novak, D; Palinkas, J; Szekely, G; Szillasi, Z; Tokesi, K; Veszpremi, V; Kapusi, A; Marian, G; Raics, P; Szabo, Z; Trocsanyi, Z L; Ujvari, B; Zilizi, G; Bansal, S; Bawa, H S; Beri, S B; Bhatnagar, V; Jindal, M; Kaur, M; Kaur, R; Kohli, J M; Mehta, M Z; Nishu, N; Saini, L K; Sharma, A; Singh, A; Singh, J B; Singh, S P; Ahuja, S; Arora, S; Bhattacharya, S; Chauhan, S; Choudhary, B C; Gupta, P; Jain, S; Jha, M; Kumar, A; Ranjan, K; Shivpuri, R K; Srivastava, A K; Choudhury, R K; Dutta, D; Kailas, S; Kataria, S K; Mohanty, A K; Pant, L M; Shukla, P; Topkar, A; Aziz, T; Guchait, M; Gurtu, A; Maity, M; Majumder, D; Majumder, G; Mazumdar, K; Nayak, A; Saha, A; Sudhakar, K; Banerjee, S; Dugad, S; Mondal, N K; Arfaei, H; Bakhshiansohi, H; Fahim, A; Jafari, A; Mohammadi Najafabadi, M; Moshaii, A; Paktinat Mehdiabadi, S; Rouhani, S; Safarzadeh, B; Zeinali, M; Felcini, M; Abbrescia, M; Barbone, L; Chiumarulo, F; Clemente, A; Colaleo, A; Creanza, D; Cuscela, G; De Filippis, N; De Palma, M; De Robertis, G; Donvito, G; Fedele, F; Fiore, L; Franco, M; Iaselli, G; Lacalamita, N; Loddo, F; Lusito, L; Maggi, G; Maggi, M; Manna, N; Marangelli, B; My, S; Natali, S; Nuzzo, S; Papagni, G; Piccolomo, S; Pierro, G A; Pinto, C; Pompili, A; Pugliese, G; Rajan, R; Ranieri, A; Romano, F; Roselli, G; Selvaggi, G; Shinde, Y; Silvestris, L; Tupputi, S; Zito, G; Abbiendi, G; Bacchi, W; Benvenuti, A C; Boldini, M; Bonacorsi, D; Braibant-Giacomelli, S; Cafaro, V D; Caiazza, S S; Capiluppi, P; Castro, A; Cavallo, F R; Codispoti, G; Cuffiani, M; D'Antone, I; Dallavalle, G M; Fabbri, F; Fanfani, A; Fasanella, D; Giacomelli, P; Giordano, V; Giunta, M; Grandi, C; Guerzoni, M; Marcellini, S; Masetti, G; Montanari, A; Navarria, F L; Odorici, F; Pellegrini, G; Perrotta, A; Rossi, A M; Rovelli, T; Siroli, G; Torromeo, G; Travaglini, R; Albergo, S; Costa, S; Potenza, R; Tricomi, A; Tuve, C; Barbagli, G; Broccolo, G; Ciulli, V; Civinini, C; D'Alessandro, R; Focardi, E; Frosali, S; Gallo, E; Genta, C; Landi, G; Lenzi, P; Meschini, M; Paoletti, S; Sguazzoni, G; Tropiano, A; Benussi, L; Bertani, M; Bianco, S; Colafranceschi, S; Colonna, D; Fabbri, F; Giardoni, M; Passamonti, L; Piccolo, D; Pierluigi, D; Ponzio, B; Russo, A; Fabbricatore, P; Musenich, R; Benaglia, A; Calloni, M; Cerati, G B; D'Angelo, P; De Guio, F; Farina, F M; Ghezzi, A; Govoni, P; Malberti, M; Malvezzi, S; Martelli, A; Menasce, D; Miccio, V; Moroni, L; Negri, P; Paganoni, M; Pedrini, D; Pullia, A; Ragazzi, S; Redaelli, N; Sala, S; Salerno, R; Tabarelli de Fatis, T; Tancini, V; Taroni, S; Buontempo, S; Cavallo, N; Cimmino, A; De Gruttola, M; Fabozzi, F; Iorio, A O M; Lista, L; Lomidze, D; Noli, P; Paolucci, P; Sciacca, C; Azzi, P; Bacchetta, N; Barcellan, L; Bellan, P; Bellato, M; Benettoni, M; Biasotto, M; Bisello, D; Borsato, E; Branca, A; Carlin, R; Castellani, L; Checchia, P; Conti, E; Dal Corso, F; De Mattia, M; Dorigo, T; Dosselli, U; Fanzago, F; Gasparini, F; Gasparini, U; Giubilato, P; Gonella, F; Gresele, A; Gulmini, M; Kaminskiy, A; Lacaprara, S; Lazzizzera, I; Margoni, M; Maron, G; Mattiazzo, S; Mazzucato, M; Meneghelli, M; Meneguzzo, A T; Michelotto, M; Montecassiano, F; Nespolo, M; Passaseo, M; Pegoraro, M; Perrozzi, L; Pozzobon, N; Ronchese, P; Simonetto, F; Toniolo, N; Torassa, E; Tosi, M; Triossi, A; Vanini, S; Ventura, S; Zotto, P; Zumerle, G; Baesso, P; Berzano, U; Bricola, S; Necchi, M M; Pagano, D; Ratti, S P; Riccardi, C; Torre, P; Vicini, A; Vitulo, P; Viviani, C; Aisa, D; Aisa, S; Babucci, E; Biasini, M; Bilei, G M; Caponeri, B; Checcucci, B; Dinu, N; Fanò, L; Farnesini, L; Lariccia, P; Lucaroni, A; Mantovani, G; Nappi, A; Piluso, A; Postolache, V; Santocchia, A; Servoli, L; Tonoiu, D; Vedaee, A; Volpe, R; Azzurri, P; Bagliesi, G; Bernardini, J; Berretta, L; Boccali, T; Bocci, A; Borrello, L; Bosi, F; Calzolari, F; Castaldi, R; Dell'Orso, R; Fiori, F; Foà, L; Gennai, S; Giassi, A; Kraan, A; Ligabue, F; Lomtadze, T; Mariani, F; Martini, L; Massa, M; Messineo, A; Moggi, A; Palla, F; Palmonari, F; Petragnani, G; Petrucciani, G; Raffaelli, F; Sarkar, S; Segneri, G; Serban, A T; Spagnolo, P; Tenchini, R; Tolaini, S; Tonelli, G; Venturi, A; Verdini, P G; Baccaro, S; Barone, L; Bartoloni, A; Cavallari, F; Dafinei, I; Del Re, D; Di Marco, E; Diemoz, M; Franci, D; Longo, E; Organtini, G; Palma, A; Pandolfi, F; Paramatti, R; Pellegrino, F; Rahatlou, S; Rovelli, C; Alampi, G; Amapane, N; Arcidiacono, R; Argiro, S; Arneodo, M; Biino, C; Borgia, M A; Botta, C; Cartiglia, N; Castello, R; Cerminara, G; Costa, M; Dattola, D; Dellacasa, G; Demaria, N; Dughera, G; Dumitrache, F; Graziano, A; Mariotti, C; Marone, M; Maselli, S; Migliore, E; Mila, G; Monaco, V; Musich, M; Nervo, M; Obertino, M M; Oggero, S; Panero, R; Pastrone, N; Pelliccioni, M; Romero, A; Ruspa, M; Sacchi, R; Solano, A; Staiano, A; Trapani, P P; Trocino, D; Vilela Pereira, A; Visca, L; Zampieri, A; Ambroglini, F; Belforte, S; Cossutti, F; Della Ricca, G; Gobbo, B; Penzo, A; Chang, S; Chung, J; Kim, D H; Kim, G N; Kong, D J; Park, H; Son, D C; Bahk, S Y; Song, S; Jung, S Y; Hong, B; Kim, H; Kim, J H; Lee, K S; Moon, D H; Park, S K; Rhee, H B; Sim, K S; Kim, J; Choi, M; Hahn, G; Park, I C; Choi, S; Choi, Y; Goh, J; Jeong, H; Kim, T J; Lee, J; Lee, S; Janulis, M; Martisiute, D; Petrov, P; Sabonis, T; Castilla Valdez, H; Sánchez Hernández, A; Carrillo Moreno, S; Morelos Pineda, A; Allfrey, P; Gray, R N C; Krofcheck, D; Bernardino Rodrigues, N; Butler, P H; Signal, T; Williams, J C; Ahmad, M; Ahmed, I; Ahmed, W; Asghar, M I; Awan, M I M; Hoorani, H R; Hussain, I; Khan, W A; Khurshid, T; Muhammad, S; Qazi, S; Shahzad, H; Cwiok, M; Dabrowski, R; Dominik, W; Doroba, K; Konecki, M; Krolikowski, J; Pozniak, K; Romaniuk, Ryszard; Zabolotny, W; Zych, P; Frueboes, T; Gokieli, R; Goscilo, L; Górski, M; Kazana, M; Nawrocki, K; Szleper, M; Wrochna, G; Zalewski, P; Almeida, N; Antunes Pedro, L; Bargassa, P; David, A; Faccioli, P; Ferreira Parracho, P G; Freitas Ferreira, M; Gallinaro, M; Guerra Jordao, M; Martins, P; Mini, G; Musella, P; Pela, J; Raposo, L; Ribeiro, P Q; Sampaio, S; Seixas, J; Silva, J; Silva, P; Soares, D; Sousa, M; Varela, J; Wöhri, H K; Altsybeev, I; Belotelov, I; Bunin, P; Ershov, Y; Filozova, I; Finger, M; Finger, M., Jr.; Golunov, A; Golutvin, I; Gorbounov, N; Kalagin, V; Kamenev, A; Karjavin, V; Konoplyanikov, V; Korenkov, V; Kozlov, G; Kurenkov, A; Lanev, A; Makankin, A; Mitsyn, V V; Moisenz, P; Nikonov, E; Oleynik, D; Palichik, V; Perelygin, V; Petrosyan, A; Semenov, R; Shmatov, S; Smirnov, V; Smolin, D; Tikhonenko, E; Vasil'ev, S; Vishnevskiy, A; Volodko, A; Zarubin, A; Zhiltsov, V; Bondar, N; Chtchipounov, L; Denisov, A; Gavrikov, Y; Gavrilov, G; Golovtsov, V; Ivanov, Y; Kim, V; Kozlov, V; Levchenko, P; Obrant, G; Orishchin, E; Petrunin, A; Shcheglov, Y; Shchetkovskiy, A; Sknar, V; Smirnov, I; Sulimov, V; Tarakanov, V; Uvarov, L; Vavilov, S; Velichko, G; Volkov, S; Vorobyev, A; Andreev, Yu; Anisimov, A; Antipov, P; Dermenev, A; Gninenko, S; Golubev, N; Kirsanov, M; Krasnikov, N; Matveev, V; Pashenkov, A; Postoev, V E; Solovey, A; Toropin, A; Troitsky, S; Baud, A; Epshteyn, V; Gavrilov, V; Ilina, N; Kaftanov, V; Kolosov, V; Kossov, M; Krokhotin, A; Kuleshov, S; Oulianov, A; Safronov, G; Semenov, S; Shreyber, I; Stolin, V; Vlasov, E; Zhokin, A; Boos, E; Dubinin, M; Dudko, L; Ershov, A; Gribushin, A; Klyukhin, V; Kodolova, O; Lokhtin, I; Petrushanko, S; Sarycheva, L; Savrin, V; Snigirev, A; Vardanyan, I; Dremin, I; Kirakosyan, M; Konovalova, N; Rusakov, S V; Vinogradov, A; Akimenko, S; Artamonov, A; Azhgirey, I; Bitioukov, S; Burtovoy, V; Grishin, V; Kachanov, V; Konstantinov, D; Krychkine, V; Levine, A; Lobov, I; Lukanin, V; Mel'nik, Y; Petrov, V; Ryutin, R; Slabospitsky, S; Sobol, A; Sytine, A; Tourtchanovitch, L; Troshin, S; Tyurin, N; Uzunian, A; Volkov, A; Adzic, P; Djordjevic, M; Jovanovic, D; Krpic, D; Maletic, D; Puzovic, J; Smiljkovic, N; Aguilar-Benitez, M; Alberdi, J; Alcaraz Maestre, J; Arce, P; Barcala, J M; Battilana, C; Burgos Lazaro, C; Caballero Bejar, J; Calvo, E; Cardenas Montes, M; Cepeda, M; Cerrada, M; Chamizo Llatas, M; Clemente, F; Colino, N; Daniel, M; De La Cruz, B; Delgado Peris, A; Diez Pardos, C; Fernandez Bedoya, C; Fernández Ramos, J P; Ferrando, A; Flix, J; Fouz, M C; Garcia-Abia, P; Garcia-Bonilla, A C; Gonzalez Lopez, O; Goy Lopez, S; Hernandez, J M; Josa, M I; Marin, J; Merino, G; Molina, J; Molinero, A; Navarrete, J J; Oller, J C; Puerta Pelayo, J; Romero, L; Santaolalla, J; Villanueva Munoz, C; Willmott, C; Yuste, C; Albajar, C; Blanco Otano, M; de Trocóniz, J F; Garcia Raboso, A; Lopez Berengueres, J O; Cuevas, J; Fernandez Menendez, J; Gonzalez Caballero, I; Lloret Iglesias, L; Naves Sordo, H; Vizan Garcia, J M; Cabrillo, I J; Calderon, A; Chuang, S H; Diaz Merino, I; Diez Gonzalez, C; Duarte Campderros, J; Fernandez, M; Gomez, G; Gonzalez Sanchez, J; Gonzalez Suarez, R; Jorda, C; Lobelle Pardo, P; Lopez Virto, A; Marco, J; Marco, R; Martinez Rivero, C; Martinez Ruiz del Arbol, P; Matorras, F; Rodrigo, T; Ruiz Jimeno, A; Scodellaro, L; Sobron Sanudo, M; Vila, I; Vilar Cortabitarte, R; Abbaneo, D; Albert, E; Alidra, M; Ashby, S; Auffray, E; Baechler, J; Baillon, P; Ball, A H; Bally, S L; Barney, D; Beaudette, F; Bellan, R; Benedetti, D; Benelli, G; Bernet, C; Bloch, P; Bolognesi, S; Bona, M; Bos, J; Bourgeois, N; Bourrel, T; Breuker, H; Bunkowski, K; Campi, D; Camporesi, T; Cano, E; Cattai, A; Chatelain, J P; Chauvey, M; Christiansen, T; Coarasa Perez, J A; Conde Garcia, A; Covarelli, R; Curé, B; De Roeck, A; Delachenal, V; Deyrail, D; Di Vincenzo, S; Dos Santos, S; Dupont, T; Edera, L M; Elliott-Peisert, A; Eppard, M; Favre, M; Frank, N; Funk, W; Gaddi, A; Gastal, M; Gateau, M; Gerwig, H; Gigi, D; Gill, K; Giordano, D; Girod, J P; Glege, F; Gomez-Reino Garrido, R; Goudard, R; Gowdy, S; Guida, R; Guiducci, L; Gutleber, J; Hansen, M; Hartl, C; Harvey, J; Hegner, B; Hoffmann, H F; Holzner, A; Honma, A; Huhtinen, M; Innocente, V; Janot, P; Le Godec, G; Lecoq, P; Leonidopoulos, C; Loos, R; Lourenço, C; Lyonnet, A; Macpherson, A; Magini, N; Maillefaud, J D; Maire, G; Mäki, T; Malgeri, L; Mannelli, M; Masetti, L; Meijers, F; Meridiani, P; Mersi, S; Meschi, E; Meynet Cordonnier, A; Moser, R; Mulders, M; Mulon, J; Noy, M; Oh, A; Olesen, G; Onnela, A; Orimoto, T; Orsini, L; Perez, E; Perinic, G; Pernot, J F; Petagna, P; Petiot, P; Petrilli, A; Pfeiffer, A; Pierini, M; Pimiä, M; Pintus, R; Pirollet, B; Postema, H; Racz, A; Ravat, S; Rew, S B; Rodrigues Antunes, J; Rolandi, G; Rovere, M; Ryjov, V; Sakulin, H; Samyn, D; Sauce, H; Schäfer, C; Schlatter, W D; Schröder, M; Schwick, C; Sciaba, A; Segoni, I; Sharma, A; Siegrist, N; Siegrist, P; Sinanis, N; Sobrier, T; Sphicas, P; Spiga, D; Spiropulu, M; Stöckli, F; Traczyk, P; Tropea, P; Troska, J; Tsirou, A; Veillet, L; Veres, G I; Voutilainen, M; Wertelaers, P; Zanetti, M; Bertl, W; Deiters, K; Erdmann, W; Gabathuler, K; Horisberger, R; Ingram, Q; Kaestli, H C; König, S; Kotlinski, D; Langenegger, U; Meier, F; Renker, D; Rohe, T; Sibille, J; Starodumov, A; Betev, B; Caminada, L; Chen, Z; Cittolin, S; Da Silva Di Calafiori, D R; Dambach, S; Dissertori, G; Dittmar, M; Eggel, C; Eugster, J; Faber, G; Freudenreich, K; Grab, C; Hervé, A; Hintz, W; Lecomte, P; Luckey, P D; Lustermann, W; Marchica, C; Milenovic, P; Moortgat, F; Nardulli, A; Nessi-Tedaldi, F; Pape, L; Pauss, F; Punz, T; Rizzi, A; Ronga, F J; Sala, L; Sanchez, A K; Sawley, M C; Sordini, V; Stieger, B; Tauscher, L; Thea, A; Theofilatos, K; Treille, D; Trüb, P; Weber, M; Wehrli, L; Weng, J; Zelepoukine, S; Amsler, C; Chiochia, V; De Visscher, S; Regenfus, C; Robmann, P; Rommerskirchen, T; Schmidt, A; Tsirigkas, D; Wilke, L; Chang, Y H; Chen, E A; Chen, W T; Go, A; Kuo, C M; Li, S W; Lin, W; Bartalini, P; Chang, P; Chao, Y; Chen, K F; Hou, W S; Hsiung, Y; Lei, Y J; Lin, S W; Lu, R S; Schümann, J; Shiu, J G; Tzeng, Y M; Ueno, K; Velikzhanin, Y; Wang, C C; Wang, M; Adiguzel, A; Ayhan, A; Azman Gokce, A; Bakirci, M N; Cerci, S; Dumanoglu, I; Eskut, E; Girgis, S; Gurpinar, E; Hos, I; Karaman, T; Kayis Topaksu, A; Kurt, P; Önengüt, G; Önengüt Gökbulut, G; Ozdemir, K; Ozturk, S; Polatöz, A; Sogut, K; Tali, B; Topakli, H; Uzun, D; Vergili, L N; Vergili, M; Akin, I V; Aliev, T; Bilmis, S; Deniz, M; Gamsizkan, H; Guler, A M; Öcalan, K; Serin, M; Sever, R; Surat, U E; Zeyrek, M; Deliomeroglu, M; Demir, D; Gülmez, E; Halu, A; Isildak, B; Kaya, M; Kaya, O; Ozkorucuklu, S; Sonmez, N; Levchuk, L; Lukyanenko, S; Soroka, D; Zub, S; Bostock, F; Brooke, J J; Cheng, T L; Cussans, D; Frazier, R; Goldstein, J; Grant, N; Hansen, M; Heath, G P; Heath, H F; Hill, C; Huckvale, B; Jackson, J; Mackay, C K; Metson, S; Newbold, D M; Nirunpong, K; Smith, V J; Velthuis, J; Walton, R; Bell, K W; Brew, C; Brown, R M; Camanzi, B; Cockerill, D J A; Coughlan, J A; Geddes, N I; Harder, K; Harper, S; Kennedy, B W; Murray, P; Shepherd-Themistocleous, C H; Tomalin, I R; Williams, J H; Womersley, W J; Worm, S D; Bainbridge, R; Ball, G; Ballin, J; Beuselinck, R; Buchmuller, O; Colling, D; Cripps, N; Davies, G; Della Negra, M; Foudas, C; Fulcher, J; Futyan, D; Hall, G; Hays, J; Iles, G; Karapostoli, G; MacEvoy, B C; Magnan, A M; Marrouche, J; Nash, J; Nikitenko, A; Papageorgiou, A; Pesaresi, M; Petridis, K; Pioppi, M; Raymond, D M; Rompotis, N; Rose, A; Ryan, M J; Seez, C; Sharp, P; Sidiropoulos, G; Stettler, M; Stoye, M; Takahashi, M; Tapper, A; Timlin, C; Tourneur, S; Vazquez Acosta, M; Virdee, T; Wakefield, S; Wardrope, D; Whyntie, T; Wingham, M; Cole, J E; Goitom, I; Hobson, P R; Khan, A; Kyberd, P; Leslie, D; Munro, C; Reid, I D; Siamitros, C; Taylor, R; Teodorescu, L; Yaselli, I; Bose, T; Carleton, M; Hazen, E; Heering, A H; Heister, A; John, J St; Lawson, P; Lazic, D; Osborne, D; Rohlf, J; Sulak, L; Wu, S; Andrea, J; Avetisyan, A; Bhattacharya, S; Chou, J P; Cutts, D; Esen, S; Kukartsev, G; Landsberg, G; Narain, M; Nguyen, D; Speer, T; Tsang, K V; Breedon, R; Calderon De La Barca Sanchez, M; Case, M; Cebra, D; Chertok, M; Conway, J; Cox, P T; Dolen, J; Erbacher, R; Friis, E; Ko, W; Kopecky, A; Lander, R; Lister, A; Liu, H; Maruyama, S; Miceli, T; Nikolic, M; Pellett, D; Robles, J; Searle, M; Smith, J; Squires, M; Stilley, J; Tripathi, M; Vasquez Sierra, R; Veelken, C; Andreev, V; Arisaka, K; Cline, D; Cousins, R; Erhan, S; Hauser, J; Ignatenko, M; Jarvis, C; Mumford, J; Plager, C; Rakness, G; Schlein, P; Tucker, J; Valuev, V; Wallny, R; Yang, X; Babb, J; Bose, M; Chandra, A; Clare, R; Ellison, J A; Gary, J W; Hanson, G; Jeng, G Y; Kao, S C; Liu, F; Liu, H; Luthra, A; Nguyen, H; Pasztor, G; Satpathy, A; Shen, B C; Stringer, R; Sturdy, J; Sytnik, V; Wilken, R; Wimpenny, S; Branson, J G; Dusinberre, E; Evans, D; Golf, F; Kelley, R; Lebourgeois, M; Letts, J; Lipeles, E; Mangano, B; Muelmenstaedt, J; Norman, M; Padhi, S; Petrucci, A; Pi, H; Pieri, M; Ranieri, R; Sani, M; Sharma, V; Simon, S; Würthwein, F; Yagil, A; Campagnari, C; D'Alfonso, M; Danielson, T; Garberson, J; Incandela, J; Justus, C; Kalavase, P; Koay, S A; Kovalskyi, D; Krutelyov, V; Lamb, J; Lowette, S; Pavlunin, V; Rebassoo, F; Ribnik, J; Richman, J; Rossin, R; Stuart, D; To, W; Vlimant, J R; Witherell, M; Apresyan, A; Bornheim, A; Bunn, J; Chiorboli, M; Gataullin, M; Kcira, D; Litvine, V; Ma, Y; Newman, H B; Rogan, C; Timciuc, V; Veverka, J; Wilkinson, R; Yang, Y; Zhang, L; Zhu, K; Zhu, R Y; Akgun, B; Carroll, R; Ferguson, T; Jang, D W; Jun, S Y; Paulini, M; Russ, J; Terentyev, N; Vogel, H; Vorobiev, I; Cumalat, J P; Dinardo, M E; Drell, B R; Ford, W T; Heyburn, B; Luiggi Lopez, E; Nauenberg, U; Stenson, K; Ulmer, K; Wagner, S R; Zang, S L; Agostino, L; Alexander, J; Blekman, F; Cassel, D; Chatterjee, A; Das, S; Gibbons, L K; Heltsley, B; Hopkins, W; Khukhunaishvili, A; Kreis, B; Kuznetsov, V; Patterson, J R; Puigh, D; Ryd, A; Shi, X; Stroiney, S; Sun, W; Teo, W D; Thom, J; Vaughan, J; Weng, Y; Wittich, P; Beetz, C P; Cirino, G; Sanzeni, C; Winn, D; Abdullin, S; Afaq, M A; Albrow, M; Ananthan, B; Apollinari, G; Atac, M; Badgett, W; Bagby, L; Bakken, J A; Baldin, B; Banerjee, S; Banicz, K; Bauerdick, L A T; Beretvas, A; Berryhill, J; Bhat, P C; Biery, K; Binkley, M; Bloch, I; Borcherding, F; Brett, A M; Burkett, K; Butler, J N; Chetluru, V; Cheung, H W K; Chlebana, F; Churin, I; Cihangir, S; Crawford, M; Dagenhart, W; Demarteau, M; Derylo, G; Dykstra, D; Eartly, D P; Elias, J E; Elvira, V D; Evans, D; Feng, L; Fischler, M; Fisk, I; Foulkes, S; Freeman, J; Gartung, P; Gottschalk, E; Grassi, T; Green, D; Guo, Y; Gutsche, O; Hahn, A; Hanlon, J; Harris, R M; Holzman, B; Howell, J; Hufnagel, D; James, E; Jensen, H; Johnson, M; Jones, C D; Joshi, U; Juska, E; Kaiser, J; Klima, B; Kossiakov, S; Kousouris, K; Kwan, S; Lei, C M; Limon, P; Lopez Perez, J A; Los, S; Lueking, L; Lukhanin, G; Lusin, S; Lykken, J; Maeshima, K; Marraffino, J M; Mason, D; McBride, P; Miao, T; Mishra, K; Moccia, S; Mommsen, R; Mrenna, S; Muhammad, A S; Newman-Holmes, C; Noeding, C; O'Dell, V; Prokofyev, O; Rivera, R; Rivetta, C H; Ronzhin, A; Rossman, P; Ryu, S; Sekhri, V; Sexton-Kennedy, E; Sfiligoi, I; Sharma, S; Shaw, T M; Shpakov, D; Skup, E; Smith, R P; Soha, A; Spalding, W J; Spiegel, L; Suzuki, I; Tan, P; Tanenbaum, W; Tkaczyk, S; Trentadue, R; Uplegger, L; Vaandering, E W; Vidal, R; Whitmore, J; Wicklund, E; Wu, W; Yarba, J; Yumiceva, F; Yun, J C; Acosta, D; Avery, P; Barashko, V; Bourilkov, D; Chen, M; Di Giovanni, G P; Dobur, D; Drozdetskiy, A; Field, R D; Fu, Y; Furic, I K; Gartner, J; Holmes, D; Kim, B; Klimenko, S; Konigsberg, J; Korytov, A; Kotov, K; Kropivnitskaya, A; Kypreos, T; Madorsky, A; Matchev, K; Mitselmakher, G; Pakhotin, Y; Piedra Gomez, J; Prescott, C; Rapsevicius, V; Remington, R; Schmitt, M; Scurlock, B; Wang, D; Yelton, J; Ceron, C; Gaultney, V; Kramer, L; Lebolo, L M; Linn, S; Markowitz, P; Martinez, G; Rodriguez, J L; Adams, T; Askew, A; Baer, H; Bertoldi, M; Chen, J; Dharmaratna, W G D; Gleyzer, S V; Haas, J; Hagopian, S; Hagopian, V; Jenkins, M; Johnson, K F; Prettner, E; Prosper, H; Sekmen, S; Baarmand, M M; Guragain, S; Hohlmann, M; Kalakhety, H; Mermerkaya, H; Ralich, R; Vodopiyanov, I; Abelev, B; Adams, M R; Anghel, I M; Apanasevich, L; Bazterra, V E; Betts, R R; Callner, J; Castro, M A; Cavanaugh, R; Dragoiu, C; Garcia-Solis, E J; Gerber, C E; Hofman, D J; Khalatian, S; Mironov, C; Shabalina, E; Smoron, A; Varelas, N; Akgun, U; Albayrak, E A; Ayan, A S; Bilki, B; Briggs, R; Cankocak, K; Chung, K; Clarida, W; Debbins, P; Duru, F; Ingram, F D; Lae, C K; McCliment, E; Merlo, J P; Mestvirishvili, A; Miller, M J; Moeller, A; Nachtman, J; Newsom, C R; Norbeck, E; Olson, J; Onel, Y; Ozok, F; Parsons, J; Schmidt, I; Sen, S; Wetzel, J; Yetkin, T; Yi, K; Barnett, B A; Blumenfeld, B; Bonato, A; Chien, C Y; Fehling, D; Giurgiu, G; Gritsan, A V; Guo, Z J; Maksimovic, P; Rappoccio, S; Swartz, M; Tran, N V; Zhang, Y; Baringer, P; Bean, A; Grachov, O; Murray, M; Radicci, V; Sanders, S; Wood, J S; Zhukova, V; Bandurin, D; Bolton, T; Kaadze, K; Liu, A; Maravin, Y; Onoprienko, D; Svintradze, I; Wan, Z; Gronberg, J; Hollar, J; Lange, D; Wright, D; Baden, D; Bard, R; Boutemeur, M; Eno, S C; Ferencek, D; Hadley, N J; Kellogg, R G; Kirn, M; Kunori, S; Rossato, K; Rumerio, P; Santanastasio, F; Skuja, A; Temple, J; Tonjes, M B; Tonwar, S C; Toole, T; Twedt, E; Alver, B; Bauer, G; Bendavid, J; Busza, W; Butz, E; Cali, I A; Chan, M; D'Enterria, D; Everaerts, P; Gomez Ceballos, G; Hahn, K A; Harris, P; Jaditz, S; Kim, Y; Klute, M; Lee, Y J; Li, W; Loizides, C; Ma, T; Miller, M; Nahn, S; Paus, C; Roland, C; Roland, G; Rudolph, M; Stephans, G; Sumorok, K; Sung, K; Vaurynovich, S; Wenger, E A; Wyslouch, B; Xie, S; Yilmaz, Y; Yoon, A S; Bailleux, D; Cooper, S I; Cushman, P; Dahmes, B; De Benedetti, A; Dolgopolov, A; Dudero, P R; Egeland, R; Franzoni, G; Haupt, J; Inyakin, A; Klapoetke, K; Kubota, Y; Mans, J; Mirman, N; Petyt, D; Rekovic, V; Rusack, R; Schroeder, M; Singovsky, A; Zhang, J; Cremaldi, L M; Godang, R; Kroeger, R; Perera, L; Rahmat, R; Sanders, D A; Sonnek, P; Summers, D; Bloom, K; Bockelman, B; Bose, S; Butt, J; Claes, D R; Dominguez, A; Eads, M; Keller, J; Kelly, T; Kravchenko, I; Lazo-Flores, J; Lundstedt, C; Malbouisson, H; Malik, S; Snow, G R; Baur, U; Iashvili, I; Kharchilava, A; Kumar, A; Smith, K; Strang, M; Alverson, G; Barberis, E; Boeriu, O; Eulisse, G; Govi, G; McCauley, T; Musienko, Y; Muzaffar, S; Osborne, I; Paul, T; Reucroft, S; Swain, J; Taylor, L; Tuura, L; Anastassov, A; Gobbi, B; Kubik, A; Ofierzynski, R A; Pozdnyakov, A; Schmitt, M; Stoynev, S; Velasco, M; Won, S; Antonelli, L; Berry, D; Hildreth, M; Jessop, C; Karmgard, D J; Kolberg, T; Lannon, K; Lynch, S; Marinelli, N; Morse, D M; Ruchti, R; Slaunwhite, J; Warchol, J; Wayne, M; Bylsma, B; Durkin, L S; Gilmore, J; Gu, J; Killewald, P; Ling, T Y; Williams, G; Adam, N; Berry, E; Elmer, P; Garmash, A; Gerbaudo, D; Halyo, V; Hunt, A; Jones, J; Laird, E; Marlow, D; Medvedeva, T; Mooney, M; Olsen, J; Piroué, P; Stickland, D; Tully, C; Werner, J S; Wildish, T; Xie, Z; Zuranski, A; Acosta, J G; Bonnett Del Alamo, M; Huang, X T; Lopez, A; Mendez, H; Oliveros, S; Ramirez Vargas, J E; Santacruz, N; Zatzerklyany, A; Alagoz, E; Antillon, E; Barnes, V E; Bolla, G; Bortoletto, D; Everett, A; Garfinkel, A F; Gecse, Z; Gutay, L; Ippolito, N; Jones, M; Koybasi, O; Laasanen, A T; Leonardo, N; Liu, C; Maroussov, V; Merkel, P; Miller, D H; Neumeister, N; Sedov, A; Shipsey, I; Yoo, H D; Zheng, Y; Jindal, P; Parashar, N; Cuplov, V; Ecklund, K M; Geurts, F J M; Liu, J H; Maronde, D; Matveev, M; Padley, B P; Redjimi, R; Roberts, J; Sabbatini, L; Tumanov, A; Betchart, B; Bodek, A; Budd, H; Chung, Y S; de Barbaro, P; Demina, R; Flacher, H; Gotra, Y; Harel, A; Korjenevski, S; Miner, D C; Orbaker, D; Petrillo, G; Vishnevskiy, D; Zielinski, M; Bhatti, A; Demortier, L; Goulianos, K; Hatakeyama, K; Lungu, G; Mesropian, C; Yan, M; Atramentov, O; Bartz, E; Gershtein, Y; Halkiadakis, E; Hits, D; Lath, A; Rose, K; Schnetzer, S; Somalwar, S; Stone, R; Thomas, S; Watts, T L; Cerizza, G; Hollingsworth, M; Spanier, S; Yang, Z C; York, A; Asaadi, J; Aurisano, A; Eusebi, R; Golyash, A; Gurrola, A; Kamon, T; Nguyen, C N; Pivarski, J; Safonov, A; Sengupta, S; Toback, D; Weinberger, M; Akchurin, N; Berntzon, L; Gumus, K; Jeong, C; Kim, H; Lee, S W; Popescu, S; Roh, Y; Sill, A; Volobouev, I; Washington, E; Wigmans, R; Yazgan, E; Engh, D; Florez, C; Johns, W; Pathak, S; Sheldon, P; Andelin, D; Arenton, M W; Balazs, M; Boutle, S; Buehler, M; Conetti, S; Cox, B; Hirosky, R; Ledovskoy, A; Neu, C; Phillips II, D; Ronquest, M; Yohay, R; Gollapinni, S; Gunthoti, K; Harr, R; Karchin, P E; Mattson, M; Sakharov, A; Anderson, M; Bachtis, M; Bellinger, J N; Carlsmith, D; Crotty, I; Dasu, S; Dutta, S; Efron, J; Feyzi, F; Flood, K; Gray, L; Grogg, K S; Grothe, M; Hall-Wilton, R; Jaworski, M; Klabbers, P; Klukas, J; Lanaro, A; Lazaridis, C; Leonard, J; Loveless, R; Magrans de Abril, M; Mohapatra, A; Ott, G; Polese, G; Reeder, D; Savin, A; Smith, W H; Sourkov, A; Swanson, J; Weinberg, M; Wenman, D; Wensveen, M; White, A

2010-01-01

The CMS Collaboration conducted a month-long data taking exercise, the Cosmic Run At Four Tesla, during October-November 2008, with the goal of commissioning the experiment for extended operation. With all installed detector systems participating, CMS recorded 270 million cosmic ray events with the solenoid at a magnetic field strength of 3.8 T. This paper describes the data flow from the detector through the various online and offline computing systems, as well as the workflows used for recording the data, for aligning and calibrating the detector, and for analysis of the data.

CMS Data Processing Workflows during an Extended Cosmic Ray Run

Energy Technology Data Exchange (ETDEWEB)

2009-11-01

The CMS Collaboration conducted a month-long data taking exercise, the Cosmic Run At Four Tesla, during October-November 2008, with the goal of commissioning the experiment for extended operation. With all installed detector systems participating, CMS recorded 270 million cosmic ray events with the solenoid at a magnetic field strength of 3.8 T. This paper describes the data flow from the detector through the various online and offline computing systems, as well as the workflows used for recording the data, for aligning and calibrating the detector, and for analysis of the data.

Routine digital pathology workflow: The Catania experience

Directory of Open Access Journals (Sweden)

Filippo Fraggetta

2017-01-01

Full Text Available Introduction: Successful implementation of whole slide imaging (WSI for routine clinical practice has been accomplished in only a few pathology laboratories worldwide. We report the transition to an effective and complete digital surgical pathology workflow in the pathology laboratory at Cannizzaro Hospital in Catania, Italy. Methods: All (100% permanent histopathology glass slides were digitized at ×20 using Aperio AT2 scanners. Compatible stain and scanning slide racks were employed to streamline operations. eSlide Manager software was bidirectionally interfaced with the anatomic pathology laboratory information system. Virtual slide trays connected to the two-dimensional (2D barcode tracking system allowed pathologists to confirm that they were correctly assigned slides and that all tissues on these glass slides were scanned. Results: Over 115,000 glass slides were digitized with a scan fail rate of around 1%. Drying glass slides before scanning minimized them sticking to scanner racks. Implementation required introduction of a 2D barcode tracking system and modification of histology workflow processes. Conclusion: Our experience indicates that effective adoption of WSI for primary diagnostic use was more dependent on optimizing preimaging variables and integration with the laboratory information system than on information technology infrastructure and ensuring pathologist buy-in. Implementation of digital pathology for routine practice not only leveraged the benefits of digital imaging but also creates an opportunity for establishing standardization of workflow processes in the pathology laboratory.

Collaborative e-Science Experiments and Scientific Workflows

NARCIS (Netherlands)

Belloum, A.; Inda, M.A.; Vasunin, D.; Korkhov, V.; Zhao, Z.; Rauwerda, H.; Breit, T.M.; Bubak, M.; Hertzberger, L.O.

2011-01-01

Recent advances in Internet and grid technologies have greatly enhanced scientific experiments' life cycle. In addition to compute- and data-intensive tasks, large-scale collaborations involving geographically distributed scientists and e-infrastructure are now possible. Scientific workflows, which

A Strategy for an MLS Workflow Management System

National Research Council Canada - National Science Library

Kang, Myong H; Froscher, Judith N; Eppinger, Brian J; Moskowitz, Ira S

1999-01-01

.... Therefore, DoD needs MLS workflow management systems (WFMS) to enable globally distributed users and existing applications to cooperate across classification domains to achieve mission critical goals...

Widening the adoption of workflows to include human and human-machine scientific processes

Science.gov (United States)

Salayandia, L.; Pinheiro da Silva, P.; Gates, A. Q.

2010-12-01

Scientific workflows capture knowledge in the form of technical recipes to access and manipulate data that help scientists manage and reuse established expertise to conduct their work. Libraries of scientific workflows are being created in particular fields, e.g., Bioinformatics, where combined with cyber-infrastructure environments that provide on-demand access to data and tools, result in powerful workbenches for scientists of those communities. The focus in these particular fields, however, has been more on automating rather than documenting scientific processes. As a result, technical barriers have impeded a wider adoption of scientific workflows by scientific communities that do not rely as heavily on cyber-infrastructure and computing environments. Semantic Abstract Workflows (SAWs) are introduced to widen the applicability of workflows as a tool to document scientific recipes or processes. SAWs intend to capture a scientists’ perspective about the process of how she or he would collect, filter, curate, and manipulate data to create the artifacts that are relevant to her/his work. In contrast, scientific workflows describe the process from the point of view of how technical methods and tools are used to conduct the work. By focusing on a higher level of abstraction that is closer to a scientist’s understanding, SAWs effectively capture the controlled vocabularies that reflect a particular scientific community, as well as the types of datasets and methods used in a particular domain. From there on, SAWs provide the flexibility to adapt to different environments to carry out the recipes or processes. These environments range from manual fieldwork to highly technical cyber-infrastructure environments, i.e., such as those already supported by scientific workflows. Two cases, one from Environmental Science and another from Geophysics, are presented as illustrative examples.

Flexible Data-Aware Scheduling for Workflows over an In-Memory Object Store

Energy Technology Data Exchange (ETDEWEB)

Duro, Francisco Rodrigo; Garcia Blas, Javier; Isaila, Florin; Wozniak, Justin M.; Carretero, Jesus; Ross, Rob

2016-01-01

This paper explores novel techniques for improving the performance of many-task workflows based on the Swift scripting language. We propose novel programmer options for automated distributed data placement and task scheduling. These options trigger a data placement mechanism used for distributing intermediate workflow data over the servers of Hercules, a distributed key-value store that can be used to cache file system data. We demonstrate that these new mechanisms can significantly improve the aggregated throughput of many-task workflows with up to 86x, reduce the contention on the shared file system, exploit the data locality, and trade off locality and load balance.

Implementation of workflow engine technology to deliver basic clinical decision support functionality.

Science.gov (United States)

Huser, Vojtech; Rasmussen, Luke V; Oberg, Ryan; Starren, Justin B

2011-04-10

Workflow engine technology represents a new class of software with the ability to graphically model step-based knowledge. We present application of this novel technology to the domain of clinical decision support. Successful implementation of decision support within an electronic health record (EHR) remains an unsolved research challenge. Previous research efforts were mostly based on healthcare-specific representation standards and execution engines and did not reach wide adoption. We focus on two challenges in decision support systems: the ability to test decision logic on retrospective data prior prospective deployment and the challenge of user-friendly representation of clinical logic. We present our implementation of a workflow engine technology that addresses the two above-described challenges in delivering clinical decision support. Our system is based on a cross-industry standard of XML (extensible markup language) process definition language (XPDL). The core components of the system are a workflow editor for modeling clinical scenarios and a workflow engine for execution of those scenarios. We demonstrate, with an open-source and publicly available workflow suite, that clinical decision support logic can be executed on retrospective data. The same flowchart-based representation can also function in a prospective mode where the system can be integrated with an EHR system and respond to real-time clinical events. We limit the scope of our implementation to decision support content generation (which can be EHR system vendor independent). We do not focus on supporting complex decision support content delivery mechanisms due to lack of standardization of EHR systems in this area. We present results of our evaluation of the flowchart-based graphical notation as well as architectural evaluation of our implementation using an established evaluation framework for clinical decision support architecture. We describe an implementation of a free workflow technology

Implementation of workflow engine technology to deliver basic clinical decision support functionality

Science.gov (United States)

2011-01-01

Background Workflow engine technology represents a new class of software with the ability to graphically model step-based knowledge. We present application of this novel technology to the domain of clinical decision support. Successful implementation of decision support within an electronic health record (EHR) remains an unsolved research challenge. Previous research efforts were mostly based on healthcare-specific representation standards and execution engines and did not reach wide adoption. We focus on two challenges in decision support systems: the ability to test decision logic on retrospective data prior prospective deployment and the challenge of user-friendly representation of clinical logic. Results We present our implementation of a workflow engine technology that addresses the two above-described challenges in delivering clinical decision support. Our system is based on a cross-industry standard of XML (extensible markup language) process definition language (XPDL). The core components of the system are a workflow editor for modeling clinical scenarios and a workflow engine for execution of those scenarios. We demonstrate, with an open-source and publicly available workflow suite, that clinical decision support logic can be executed on retrospective data. The same flowchart-based representation can also function in a prospective mode where the system can be integrated with an EHR system and respond to real-time clinical events. We limit the scope of our implementation to decision support content generation (which can be EHR system vendor independent). We do not focus on supporting complex decision support content delivery mechanisms due to lack of standardization of EHR systems in this area. We present results of our evaluation of the flowchart-based graphical notation as well as architectural evaluation of our implementation using an established evaluation framework for clinical decision support architecture. Conclusions We describe an implementation of

Impact of workflow on the use of the Surgical Safety Checklist: a qualitative study.

Science.gov (United States)

Gillespie, Brigid M; Marshall, Andrea P; Gardiner, Therese; Lavin, Joanne; Withers, Teresa K

2016-11-01

Regardless of the benefits associated of the Surgical Safety Checklist, adherence across its three phases remains inconsistent. The aim of this study was to systematically identify issues around workflow that impact on surgical teams' ability to use the Surgical Safety Checklist in a large tertiary facility in Queensland, Australia. Observational audit of 10 surgical teams and 33 semi-structured interviews with 70 participants from nursing, medicine and the community were conducted. Data were collected during 2014-2015. Inductive and deductive approaches were used to analyse field observations and interview transcripts. The domain, impact of workflow on checklist utilization, was identified. Within this domain, seven categories illustrated the causal conditions which determined the ways in which workflow influenced checklist use. These categories included: 'busy doing the task'; 'clashing task priorities'; 'being pressured, running out of time'; 'adapting processes to work patterns'; 'doubling up on work'; 'a domino effect, leading to delays' and 'reality of the workflow'. One of the greatest systemic challenges to checklist use in surgery is workflow. Process changes in the way that surgical safety checklists are used need to incorporate the temporal demands of the workflow. Any changes made must ensure the process is reliable, is easily embedded into existing work routines and is not disruptive. © 2016 Royal Australasian College of Surgeons.

TEXTBOOK ANALYSIS IN THE SERVICE OF CHEMISTRY TEACHING

Directory of Open Access Journals (Sweden)

Aija Ahtineva

2005-06-01

Full Text Available The authors of textbooks have their own visions of contents and teaching methods, which should lead to a high level of scientific thinking. However, the textbook alone does not guarantee good results because the personal and social relationships between the teacher and students have a major influence on teaching and learning. Therefore, the teacher’s study of the textbook before teaching facilitates the teaching process. This paper suggests one method of textbook analysis. In the analysis, one upper secondary level course of chemistry instruction involved the use of a learning strategy: classification of the central concepts and a classification of activities based on task difficulty. The study also attempted to find out the goodness of fit between the national curriculum and the textbook chemistry course. The national objectives concerned the content of knowledge, social significance, emphasis on experimental chemistry, and inspiring students for further study. The majority of the textbook tasks fall into higher order categories characterized by knowledge structures assuming application of knowledge or making inferences. Good textbook activities also have social significance, and a number of experimental tasks are included. The textbook quality is further enhanced by up-to-date content. All of the above qualities are related to high study motivation.

Utilization of Workflow Process Maps to Analyze Gaps in Critical Event Notification at a Large, Urban Hospital.