WorldWideScience

Sample records for teaching microprocessor control

  1. Process control by microprocessors

    Energy Technology Data Exchange (ETDEWEB)

    Arndt, W [ed.

    1978-12-01

    Papers from the workshop Process Control by Microprocessors being organized by the Karlsruhe Nuclear Research Center, Project PDV, together with the VDI/VDE-Gesellschaft fuer Mess- und Regelungstechnik are presented. The workshop was held on December 13 and 14, 1978 at the facilities of the Nuclear Research Center. The papers are arranged according to the topics of the workshop; one chapter deals with today's state of the art of microprocessor hardware and software technology; 5 chapters are dedicated to applications. The report also contains papers which will not be presented at the workshop. Both the workshop and the report are expected to improve and distribute the know-how about this modern technology.

  2. CAMAC multipurpose microprocessor controller

    International Nuclear Information System (INIS)

    Belyakova, M.P.; Nemesh, T.; Buj Zoan Chong.

    1978-01-01

    The use of CAMAC controllers in an autonomous system of data acquisition and measurement is considered. The system consists of a control intelligence controller, memory modules, and user modules in the CAMAC standard. The controller and all the modules have an output into the highway and this permits to exchange data among them without using special external cables. To increase the servicing rate, an auxiliary controller which has direct access to memory and controls the user modules, is additionally connected to the data acquisition and measurement system. In this case, the intelligence controller is passive. The system of data acquisition can be realized in the form of a multiple system with branch usage. The controller module width is three units, and the controller incorporates the Intel-8080-type microprocessor and the following interfaces: of CAMAC highways, of interruption, of memory bootstrap, and of data sequence channel

  3. Microprocessors

    CERN Document Server

    Cornillie, O A R

    1985-01-01

    Microprocessors presents an overview of the state of the art in the field of microprocessors and illustrates, with the aid of patents, its utilization and application. Organized into six parts, the book begins with an introduction to the microprocessor, microcomputer, and software. Parts I-III focus on program control, digital control, and electrical motor control. Subsequent parts show the medical applications, measuring instruments, and treatment of data in microprocessors.

  4. Microprocessors control of fermentation process

    Energy Technology Data Exchange (ETDEWEB)

    Fawzy, A S; Hinton, O R

    1980-01-01

    This paper presents three schemes for the solution of the optimal control of fermentation process. It also shows the advantages of using microprocessors in controlling and monitoring this process. A linear model of the system is considered. An optimal feedback controller is determined which maintains the states (substrate and organisms concentration) at desired values when the system is subjected to disturbances in the influent substrate and organisms concentration. Simulation results are presented for the three cases.

  5. Microprocessor control of a wind turbine generator

    Science.gov (United States)

    Gnecco, A. J.; Whitehead, G. T.

    1978-01-01

    This paper describes a microprocessor based system used to control the unattended operation of a wind turbine generator. The turbine and its microcomputer system are fully described with special emphasis on the wide variety of tasks performed by the microprocessor for the safe and efficient operation of the turbine. The flexibility, cost and reliability of the microprocessor were major factors in its selection.

  6. Microprocessor-controlled surface testing

    Energy Technology Data Exchange (ETDEWEB)

    Droscha, H

    1982-09-01

    For the quality inspection on continuous flow material webs with transverse scanning laser beam, the microprocessor control, realized now for the first time in combination with appropriate units, shows a considerable progress. Thanks to the here used electronics, surface errors can be localized within the web according to their x-y-position, quantitative analysis can be carried out and automatic sorting and registration functions can be used.

  7. Microprocessor controller for stepping motors

    International Nuclear Information System (INIS)

    Strait, B.G.; Thuot, M.E.

    1977-01-01

    A new concept for digital computer control of multiple stepping motors which operate in a severe electromagnetic pulse environment is presented. The motors position mirrors in the beam-alignment system of a 100-kJ CO 2 laser. An asynchronous communications channel of a computer is used to send coded messages, containing the motor address and stepping-command information, to the stepping-motor controller in a bit serial format over a fiber-optics communications link. The addressed controller responds by transmitting to the computer its address and other motor information, thus confirming the received message. Each controller is capable of controlling three stepping motors. The controller contains the fiber-optics interface, a microprocessor, and the stepping-motor driven circuits. The microprocessor program, which resides in an EPROM, decodes the received messages, transmits responses, performs the stepping-motor sequence logic, maintains motor-position information, and monitors the motor's reference switch. For multiple stepping-motor application, the controllers are connected in a daisy chain providing control of many motors from one asynchronous communications channel of the computer

  8. Microprocessor-controlled CAMAC data link module

    International Nuclear Information System (INIS)

    Potter, J.M.

    1978-05-01

    Communication between the central control computer and remote, satellite data-acquisition/control stations at the Clinton P. Anderson Meson Physics Facility (LAMPF) is presently accomplished through the use of CAMAC-based Data Link modules. With the advent of the microprocessor, a new philosophy for digital data communications has evolved. Data Link modules containing microprocessor controllers provide link management and communication network protocol through algorithms executed in the Data Link microprocessor. 13 figures

  9. Microprocessor controlled digital period meter

    International Nuclear Information System (INIS)

    Keefe, D.J.; McDowell, W.P.; Rusch, G.K.

    1980-01-01

    A microprocessor controlled digital period meter has been developed and tested operationally on a reactor at Argonne National Laboratory. The principle of operation is the mathematical relationship between asymptotic periods and pulse counting circuitry. This relationship is used to calculate and display the reactor periods over a range of /plus or minus/1 second to /plus or minus/999 seconds. The time interval required to update each measurement automatically varies from 8 seconds at the lowest counting rates to 2 seconds at higher counting rates. The paper will describe hardware and software design details and show the advantages of this type of Period Meter over the conventional circuits. 1 ref

  10. Microprocessor controller for phasing the accelerator

    International Nuclear Information System (INIS)

    Howry, S.K.; Wilmunder, A.R.

    1977-03-01

    A microprocessor controller is being developed to perform automatic phasing of the SLAC accelerator. It will replace the existing relay/analog boxes which are ten years old. The new system is all solid state except for the stepping motors that drive the phase shifters. A description is given of the components of the system, the control algorithm, microprocessor hardware and software design and development, and interaction with SLAC's computer control system

  11. Automated mixed traffic transit vehicle microprocessor controller

    Science.gov (United States)

    Marks, R. A.; Cassell, P.; Johnston, A. R.

    1981-01-01

    An improved Automated Mixed Traffic Vehicle (AMTV) speed control system employing a microprocessor and transistor chopper motor current controller is described and its performance is presented in terms of velocity versus time curves. The on board computer hardware and software systems are described as is the software development system. All of the programming used in this controller was implemented using FORTRAN. This microprocessor controller made possible a number of safety features and improved the comfort associated with starting and shopping. In addition, most of the vehicle's performance characteristics can be altered by simple program parameter changes. A failure analysis of the microprocessor controller was generated and the results are included. Flow diagrams for the speed control algorithms and complete FORTRAN code listings are also included.

  12. Microprocessor Controlled Capacitor Bank Switching System for ...

    African Journals Online (AJOL)

    In this work, analysis and development of a microprocessor controlled capacitor bank switching system for deployment in a smart distribution network was carried out. This system was implemented by the use of discreet components such as resistors, capacitors, transistor, diode, automatic voltage regulator, with the ...

  13. Microprocessor-controlled scanning densitometer system

    International Nuclear Information System (INIS)

    Shurtliff, R.W.

    1980-04-01

    An Automated Scanning Densitometer System has been developed by uniting a microprocessor with a low energy x-ray densitometer system. The microprocessor controls the detector movement, provides self-calibration, compensates raw readings to provide time-linear output, controls both data storage and the host computer interface, and provides measurement output in engineering units for immediate reading. The densitometer, when used in a scanning mode, is a precision reference instrument that provides chordal average density measurements over the cross section of a pipe under steady-state flow conditions. Results have shown an improvement over the original densitometer in reliability and repeatability of the system, an a factor-of-five improvement in accuracy

  14. Cardiac output measurement instruments controlled by microprocessors

    International Nuclear Information System (INIS)

    Spector, M.; Barritault, L.; Boeri, C.; Fauchet, M.; Gambini, D.; Vernejoul, P. de

    The nuclear medicine and biophysics laboratory of the Necker-Enfants malades University Hospital Centre has built a microprocessor controlled Cardiac flowmetre. The principle of the cardiac output measurement from a radiocardiogram is well established. After injection of a radioactive indicator upstream from the heart cavities the dilution curve is obtained by the use of a gamma-ray precordial detector. This curve normally displays two peaks due to passage of the indicator into the right and left sides of the heart respectively. The output is then obtained from the stewart Hamilton principle once recirculation is eliminated. The graphic method used for the calculation however is long and tedious. The decreasing fraction of the dilution curve is projected in logarithmic space in order to eliminate recirculation by determining the mean straight line from which the decreasing exponential is obtained. The principle of the use of microprocessors is explained (electronics, logics) [fr

  15. Microprocessor-controlled portable neutron spectrometer

    International Nuclear Information System (INIS)

    Hunt, G.F.; Kaifer, R.C.; Slaughter, D.R.; Strout, R.E. II; Rueppel, D.W.

    1979-01-01

    A neutron spectrometer that acquires and unfolds data in the field has been developed for use in the energy range from 1 to 20 MeV. The system includes an NE213 organic scintillation detector, automatic gain stabilization, automatically stabilized pulseshape discrimination, an LSl-11 microprocessor for control and data reduction, and a multichannel analyzer for data acquisition. The system, with the exception of the multichannel analyzer, is mounted in a suitcase 47 by 66 by 23.5 cm. The mass is 23.5 kg

  16. Microprocessor-controlled, programmable ramp voltage generator

    International Nuclear Information System (INIS)

    Hopwood, J.

    1978-11-01

    A special-purpose voltage generator has been developed for driving the quadrupole mass filter of a residual gas analyzer. The generator is microprocessor-controlled with desired ramping parameters programmed by setting front-panel digital thumb switches. The start voltage, stop voltage, and time of each excursion are selectable. A maximum of five start-stop levels may be pre-selected for each program. The ramp voltage is 0 to 10 volts with sweep times from 0.1 to 999.99 seconds

  17. Microprocessor Controlled Maximum Power Point Tracker for Photovoltaic Application

    International Nuclear Information System (INIS)

    Jiya, J. D.; Tahirou, G.

    2002-01-01

    This paper presents a microprocessor controlled maximum power point tracker for photovoltaic module. Input current and voltage are measured and multiplied within the microprocessor, which contains an algorithm to seek the maximum power point. The duly cycle of the DC-DC converter, at which the maximum power occurs is obtained, noted and adjusted. The microprocessor constantly seeks for improvement of obtained power by varying the duty cycle

  18. Concept report: Microprocessor control of electrical power system

    Science.gov (United States)

    Perry, E.

    1977-01-01

    An electrical power system which uses a microprocessor for systems control and monitoring is described. The microprocessor controlled system permits real time modification of system parameters for optimizing a system configuration, especially in the event of an anomaly. By reducing the components count, the assembling and testing of the unit is simplified, and reliability is increased. A resuable modular power conversion system capable of satisfying a large percentage of space applications requirements is examined along with the programmable power processor. The PC global controller which handles systems control and external communication is analyzed, and a software description is given. A systems application summary is also included.

  19. Digital Fractional Order Controllers Realized by PIC Microprocessor: Experimental Results

    OpenAIRE

    Petras, I.; Grega, S.; Dorcak, L.

    2003-01-01

    This paper deals with the fractional-order controllers and their possible hardware realization based on PIC microprocessor and numerical algorithm coded in PIC Basic. The mathematical description of the digital fractional -order controllers and approximation in the discrete domain are presented. An example of realization of the particular case of digital fractional-order PID controller is shown and described.

  20. Application of microprocessor based controller in the Breeder Reactor Program

    International Nuclear Information System (INIS)

    Messick, N.C.; Lukas, M.P.

    1985-01-01

    This paper treats Argonne National Laboratory's experience using microprocessor based controllers presently in use on several control loops within the EBR-II reactor facility as well as tests being performed by these controllers. Also included is a discussion of the expandability, modularity, range of capabilities and higher level functions possible using such equipment

  1. Microprocessor controlled dual parameter ADC system with a CAMAC interface

    Energy Technology Data Exchange (ETDEWEB)

    Perry, D G; Nickell, Jr, J D [Los Alamos Scientific Lab., NM (USA)

    1978-09-01

    Presented here is the design of a dual parameter ADC system which is controlled by a microprocessor and also interfaced to CAMAC. The system was designed to be mobile in that it may work wherever there is a CAMAC crate. In such cases where the CAMAC system is inoperative, the system may operate in a stand-alone mode.

  2. General-purpose microprocessor-based control chassis

    International Nuclear Information System (INIS)

    Halbig, J.K.; Klosterbuer, S.F.; Swenson, D.A.

    1979-12-01

    The objective of the Pion Generation for Medical Irradiations (PIGMI) program at the Los Alamos Scientific Laboratory is to develop the technology to build smaller, less expensive, and more reliable proton linear accelerators for medical applications. For this program, a powerful, simple, inexpensive, and reliable control and data acquisition system was developed. The system has a NOVA 3D computer with a real time disk-operating system (RDOS) that communicates with distributed microprocessor-based controllers which directly control data input/output chassis. At the heart of the controller is a microprocessor crate which was conceived at the Fermi National Accelerator Laboratory. This idea was applied to the design of the hardware and software of the controller

  3. Auxiliary/Master microprocessor CAMAC Crate Controller applications

    International Nuclear Information System (INIS)

    Barsotti, E.

    1975-01-01

    The need for further sophistication of an already complex serial CAMAC control system at Fermilab led to the development of an Auxilary/Master CAMAC Crate Controller. The controller contains a Motorola 6800 microprocessor, 2K bytes of RAM, and 8K bytes of PROM memory. Bussed dataway lines are time shared with CAMAC signals to provide memory expansion and direct addressing of peripheral devices without the need of external cabling. The Auxiliary/Master Crate Controller (A/MCC) can function as either a Master, i.e., stand alone, crate controller or as an Auxiliary controller to Fermilab's Serial Crate Controller (SCC). Two modules, one single- and one double-width, make up an A/MCC. The microprocessor has one nonmaskable and one maskable vectored interrupt. Time sharing the dataway between SCC programmed and block transfer generated dataway cycles and A/MCC operations still allows a 99 percent microprocessor CPU busy time. Since the conception of the A/MCC, there has been an increasing number of control system-related projects proposed which would not have been possible or would have been very difficult to implement without such a device. The first such application now in use at Fermilab is a stand-alone control system for a mass spectrometer experiment in the Main Ring Internal Target Area. This application in addition to other proposed A/MCC applications, both stand-alone and auxiliary, is discussed

  4. Design analysis and microprocessor based control of a nuclear reactor

    International Nuclear Information System (INIS)

    Sabbakh, N.J.

    1988-01-01

    The object of this thesis is to design and test a microprocessor based controller, to a simulated nuclear reactor system. The mathematical model that describes the dynamics of a typical nuclear reactor of one group of delayed neutrons approximations with temperature feedback was chosen. A digital computer program has been developed for the design and analysis of a simulated model based on the concept of state-variable feedback in order to meet a desired system response with maximum overshoot of 3.4% and setting time of 4 sec. The state variable feedback coefficients are designed for the continuous system, then an approximation is used to obtain in the state variable feedback vector for the discrete system. System control was implemented utilizing Direct Digital Control (DDC) of a nuclear reactor simulated model through a control algorithm that was performed by means of a microprocessor based system. The controller performance was satisfactorily tested by exciting the reactor system with a transient reactivity disturbance and by a step change in power demand. Direct digital control, when implemented on a microprocessor adds versatility, flexibility in system design with the added advantage of possible use of optimal control algorithms. 6 tabs.; 30 figs.; 46 refs.; 6 apps

  5. Applications of microprocessors in upgrading of accelerator controls

    International Nuclear Information System (INIS)

    Mallory, K.B.

    1977-03-01

    Experience at SLAC demonstrates that the criteria for selection and use of microprocessors in modifying an existing control system may differ from the criteria that apply during installation of the control system of a new accelerator. Considerations such as cost of individual projects, progressive installation without disruption of operations and training of on-board personnel can outweigh ''obvious'' goals such as standardization of hardware, uniformity of software, or even a rigid specification of link protocols with the main computer system

  6. Hierarchically structured distributed microprocessor network for control

    International Nuclear Information System (INIS)

    Greenwood, J.R.; Holloway, F.W.; Rupert, P.R.; Ozarski, R.G.; Suski, G.J.

    1979-01-01

    To satisfy a broad range of control-analysis and data-acquisition requirements for Shiva, a hierarchical, computer-based, modular-distributed control system was designed. This system handles the more than 3000 control elements and 1000 data acquisition units in a severe high-voltage, high-current environment. The control system design gives one a flexible and reliable configuration to meet the development milestones for Shiva within critical time limits

  7. Microprocessor Control Design for a Low-Head Crossflow Turbine.

    Science.gov (United States)

    1985-03-01

    Controllers For a Typical 10 KW Hydroturbine ............ 1-5 I-1 Ely’s Crossflow Turbine . ........ 11-2 11-2 Basic Turbine * * 0 * 0 11-5 11-3 Turbine...the systems. For example, a 25 kilowatt hydroturbine built and installed by Bell Hydroelectric would cost approximately $20,000 in 1978 (6:49). The...O Manual Controller S2 E- Microprocessor Controller 1 2 3 4 5 6 7 8 YEARS Fig. 1-2 Comparative Costs of Controllers For a Typical 10 KW Hydroturbine

  8. Monitoring with new microprocessor cuts cost of control system

    Energy Technology Data Exchange (ETDEWEB)

    Maehling, K L

    1985-08-01

    Programmable logic controllers (PLC) were originally developed as an alternative to relays, counters and timers for sequential and interlock control systems. They are now also used as part of distributive control systems which include diagnostic monitoring functions. The paper describes how a wiring scheme can be simplified and installation costs reduced by incorporating a newly-developed microprocessor-based monitoring device as an interface between remote devices and a PLC. An industrial application, the 400 tph coal handling facility at Bowater Southern Paper Co's mill in Calhoun, Tennessee, is considered. The control system design is outlined, the micro-monitor is described and the benefits of simplicity are stated in the paper.

  9. Rugged, remotely maintainable pipetter using microprocessor control

    International Nuclear Information System (INIS)

    Dykes, F.W.; Shurtliff, R.M.; Henscheid, J.P.; Baldwin, J.M.

    1979-01-01

    At the Idaho Chemical Processing Plant (ICPP), the chemical analysis of future nuclear fuel reprocessing solutions will require improved analytical apparatus. Remote pipetters are crucial components in the analysis procedures. Major improvements required for a new pipetter were: greater accuracy for better accounting of fissile material, greater corrosion resistance to handle new fuel reprocessing schemes, and drastic reduction in contact maintenance to reduce personnel radiation exposure to as low as reasonably achievable. The 20-year old Model B pipetter was used as the basis for an improved design. The existing pipetters are positive displacement, servo-controlled units developed from Oak Ridge National Laboratory (ORNL) designs created at the time the ICPP was built. The new pipetter is identified as the Model C

  10. A microprocessor controlled read out system for drift chambers

    CERN Document Server

    Centro, Sandro; Cittolin, Sergio; Dreesen, P; Petrolo, E; Rubbia, Carlo; Schinzel, D

    1981-01-01

    Summary form only given, as follows. A General Purpose Microprocessor Controller GPMC has been developed for applications where CAMAC modules with complex control functions are needed. Each application requires an appropriate Interface Module (IM) to be connected to the GPMC. The GPMC consists of a 6800 Microprocessor, 16K EPROM, 2K RAM, CAMAC I/O ports and interface, a RS 232C serial interface, an Advanced Data Link controller and a port for controlling the IM, GPMC and IM are housed in a 2-U wide CAMAC module. A special IM has been designed, which has 1K bute of RAM with its own control and which allows autonomous setting and reading analog voltages through a DAC and ADC. The GPMC can take control of the IM memory and set new voltages. This system is used to control pedestals and gains of a driftchamber readout system, which is housed in a 5-U wide CAMAC module, holding 24 data cards corresponding to 24 sense wires. The data card receives pulses from the left and right end of a sense wire, amplifies and int...

  11. The use of distributed microprocessors for control devices

    International Nuclear Information System (INIS)

    Lejon, J.C.

    1978-01-01

    The use of distributed individual microprocessors provided the basis for the development of the μZ system, which is a modular numerical control device which in its main part contains no elements whatever with multiple functions. With this system, total availability of control is achieved and the failure of any individual element causes loss of automatic control only over one actuator or over a small group of interdependent actuators. The human operator, who cannot be omitted even with an inherently safe control system, can operate the single faulty channel manually. The microprocessors have a free-format with which all possible algorithms within the limits of the memory size of the various cards can be performed. This program can be loaded either in random access memory (RAM) or in read-only memory (ROM). The configuration is made either by assembling software modules in a hard-copy dialogue without any knowledge of data processing being necessary, or from a program written in Fortran. If the user does not have a configurator he can use read-only memories supplied by the manufacter either in the standard form or in a requested design. The parameters are loaded by means of a portable microconsole whose keyboard and displays can be used for a hard-copy dialogue with the regulating cards. Manual control and indications can be carried out from three completely independent configurations which can be used separately or in parallel: individual station, multiple-function station or cathode colour console. (author)

  12. Microprocessor controlled pulse charge and testing of batteries

    International Nuclear Information System (INIS)

    Kerezov, A.; Gishin, S.; Ivanov, Ratcho; Savov, S.

    2002-01-01

    The principle of the developed new method for pulse charge of batteries with microprocessor control of the electrochemical processes is the use of current pulses with microprocessor control of the period and the amplitude according to the dynamically changing state of the electrochemical system. In order to realize the method described above a programmable current source was developed. It is connected with a Personal Computer via RS232 standard serial interface in order to control the electrochemical processes. The parameters to be set, the graphical presentation of the pulse current and tension, the used quantity of electricity and electrical energy for every pulse and for the process as a hole are shown on the PC display. In order to test dry-charged and wet-charged batteries a specialized current generator was developed. It is connected also with a Personal Computer via R5232 standard serial interface in order to con-trol the testing of the starting capability of the batteries according to the requirements of the Bulgarian State Standard Ell 60095-1. (Author)

  13. A low cost, microprocessor-based battery charge controller

    Energy Technology Data Exchange (ETDEWEB)

    Pulfrey, D L; Hacker, J [Pulfrey Solar Inc., Vancouver, BC (Canada)

    1990-01-01

    This report describes the design, construction, testing, and evaluation of a microprocessor-based battery charge controller that uses charge integration as the method of battery state-of-charge estimation. The controller is intended for use in medium-size (100-1000W) photovoltaic systems that employ 12V lead-acid batteries for charge storage. The controller regulates the charge flow to the battery and operates in three, automatically-determined modes, namely: charge, equalize, and float. The prototype controller is modular in nature and can handle charge/discharge currents of magnitude up to 80A, depending on the number of circuit boards employed. Evaluation tests and field trials have shown the controller to be very accurate and reliable. Based on the cost of the prototype, it appears that an original equipment manufacturer's selling price of $400 for a 40A (500W) unit may be realistic. 18 figs., 2 tabs.

  14. Supply system with microprocessor control for electron gun

    International Nuclear Information System (INIS)

    Duplin, N.I.; Sergeev, N.N.

    1988-01-01

    Precision supply system for electron gun used in Auger-spectrometer is described. The supply system consists of control and high-voltage parts, made as separate units. Supply high-voltage unit includes system supply module, filament module to supply electron gun cathode and 6 high-volt modules to supply accelerating, modulating and three focusing electrodes of the gun. High-voltage modules have the following characteristics: U-(100-1000)V output voltage, 5x10 -5 U stability, 10 -5 xU pulsation amplitude, J-(0-5)A filament current change range at 10 -4 xJ stability. Control unit including microprocessor, timer and storage devices forms control voltage for all modules and regulates voltage and current of filament at electrodes

  15. Model based design introduction: modeling game controllers to microprocessor architectures

    Science.gov (United States)

    Jungwirth, Patrick; Badawy, Abdel-Hameed

    2017-04-01

    We present an introduction to model based design. Model based design is a visual representation, generally a block diagram, to model and incrementally develop a complex system. Model based design is a commonly used design methodology for digital signal processing, control systems, and embedded systems. Model based design's philosophy is: to solve a problem - a step at a time. The approach can be compared to a series of steps to converge to a solution. A block diagram simulation tool allows a design to be simulated with real world measurement data. For example, if an analog control system is being upgraded to a digital control system, the analog sensor input signals can be recorded. The digital control algorithm can be simulated with the real world sensor data. The output from the simulated digital control system can then be compared to the old analog based control system. Model based design can compared to Agile software develop. The Agile software development goal is to develop working software in incremental steps. Progress is measured in completed and tested code units. Progress is measured in model based design by completed and tested blocks. We present a concept for a video game controller and then use model based design to iterate the design towards a working system. We will also describe a model based design effort to develop an OS Friendly Microprocessor Architecture based on the RISC-V.

  16. A microprocessor-based power control data acquisition system

    International Nuclear Information System (INIS)

    Greenberg, S.

    1982-10-01

    The project reported deals with one of the aspects of power plant control and management. In order to perform optimal distribution of power and load switching, one has to solve a specific optimization problem. In order to solve this problem one needs to collect current and power expenditure data from a large number of channels and have them processed. This particular procedure is defined as data acquisition and it constitutes the main topic of this project. A microprocessor-based data acquisition system for power management is investigated and developed. The current and power data of about 100 analog channels are sampled and collected in real-time. These data are subsequently processed to calculate the power factor (cos phi) for each channel and the maximum demand. The data is processed by an AMD 9511 Arithmetic Processing Unit and the whole system is controlled by an Intel 8080A CPU. All this information is then transfered to a universal computer through a synchronized communication channel. The optimization computations would be performed by the high level computer. Different ways of performing the search of data over a large number of channels have been investigated. A particular solution to overcome the gain and offset drift of the A/D converter, using software, has been proposed. The 8080A supervises the collection and routing of data in real time, while the 9511 performs calculation, using these data. (Author)

  17. Microprocessor-controlled wide-range streak camera

    Science.gov (United States)

    Lewis, Amy E.; Hollabaugh, Craig

    2006-08-01

    Bechtel Nevada/NSTec recently announced deployment of their fifth generation streak camera. This camera incorporates many advanced features beyond those currently available for streak cameras. The arc-resistant driver includes a trigger lockout mechanism, actively monitors input trigger levels, and incorporates a high-voltage fault interrupter for user safety and tube protection. The camera is completely modular and may deflect over a variable full-sweep time of 15 nanoseconds to 500 microseconds. The camera design is compatible with both large- and small-format commercial tubes from several vendors. The embedded microprocessor offers Ethernet connectivity, and XML [extensible markup language]-based configuration management with non-volatile parameter storage using flash-based storage media. The camera's user interface is platform-independent (Microsoft Windows, Unix, Linux, Macintosh OSX) and is accessible using an AJAX [asynchronous Javascript and XML]-equipped modem browser, such as Internet Explorer 6, Firefox, or Safari. User interface operation requires no installation of client software or browser plug-in technology. Automation software can also access the camera configuration and control using HTTP [hypertext transfer protocol]. The software architecture supports multiple-simultaneous clients, multiple cameras, and multiple module access with a standard browser. The entire user interface can be customized.

  18. Microprocessor-controlled, wide-range streak camera

    International Nuclear Information System (INIS)

    Amy E. Lewis; Craig Hollabaugh

    2006-01-01

    Bechtel Nevada/NSTec recently announced deployment of their fifth generation streak camera. This camera incorporates many advanced features beyond those currently available for streak cameras. The arc-resistant driver includes a trigger lockout mechanism, actively monitors input trigger levels, and incorporates a high-voltage fault interrupter for user safety and tube protection. The camera is completely modular and may deflect over a variable full-sweep time of 15 nanoseconds to 500 microseconds. The camera design is compatible with both large- and small-format commercial tubes from several vendors. The embedded microprocessor offers Ethernet connectivity, and XML [extensible markup language]-based configuration management with non-volatile parameter storage using flash-based storage media. The camera's user interface is platform-independent (Microsoft Windows, Unix, Linux, Macintosh OSX) and is accessible using an AJAX [asynchronous Javascript and XML]-equipped modem browser, such as Internet Explorer 6, Firefox, or Safari. User interface operation requires no installation of client software or browser plug-in technology. Automation software can also access the camera configuration and control using HTTP [hypertext transfer protocol]. The software architecture supports multiple-simultaneous clients, multiple cameras, and multiple module access with a standard browser. The entire user interface can be customized

  19. EOSCOR: a light weight, microprocessor controlled solar neutron detector

    International Nuclear Information System (INIS)

    Koga, R.; Albats, P.; Frye, G.M. Jr.; Schindler, S.M.; Denehy, B.V.; Hopper, V.D.; Mace, O.B.

    1979-01-01

    A light weight high energy neutron detector with vertical detection efficiency of 0.005 at 40 MeV and 1.4 m 2 sensitive area has been developed for long duration super-pressure balloon flight observations of solar neutrons and gamma rays. It consists of two sets of four plastic scintillator hodoscopes separated by a 1 m time-of-flight path to observe n-p, C(n,p), and C(n,d) interactions. The neutron interactions are separated from gamma ray events through TOF measurements. For a large flare, the signal from solar neutrons is expected to be an order of magnitude greater than that of the atmospheric background. The microprocessor controls the data acquisition, accumulation of histograms, and the encoding of data for the telemetry systems. A test flight of the detector was made with a zero-pressure balloon. The expected many-week duration of a super-pressure balloon flight would significantly increase the probability of observing 20-150 MeV neutrons from a medium or large flare. (Auth.)

  20. Microprocessor-controlled, wide-range streak camera

    Energy Technology Data Exchange (ETDEWEB)

    Amy E. Lewis, Craig Hollabaugh

    2006-09-01

    Bechtel Nevada/NSTec recently announced deployment of their fifth generation streak camera. This camera incorporates many advanced features beyond those currently available for streak cameras. The arc-resistant driver includes a trigger lockout mechanism, actively monitors input trigger levels, and incorporates a high-voltage fault interrupter for user safety and tube protection. The camera is completely modular and may deflect over a variable full-sweep time of 15 nanoseconds to 500 microseconds. The camera design is compatible with both large- and small-format commercial tubes from several vendors. The embedded microprocessor offers Ethernet connectivity, and XML [extensible markup language]-based configuration management with non-volatile parameter storage using flash-based storage media. The camera’s user interface is platform-independent (Microsoft Windows, Unix, Linux, Macintosh OSX) and is accessible using an AJAX [asynchronous Javascript and XML]-equipped modem browser, such as Internet Explorer 6, Firefox, or Safari. User interface operation requires no installation of client software or browser plug-in technology. Automation software can also access the camera configuration and control using HTTP [hypertext transfer protocol]. The software architecture supports multiple-simultaneous clients, multiple cameras, and multiple module access with a standard browser. The entire user interface can be customized.

  1. Different microprocessor controlled devices for ITU TRIGA Mark II reactor

    International Nuclear Information System (INIS)

    Can, B.; Omuz, S.; Uzun, S.; Apan, H.

    1990-01-01

    In this paper the design of a period meter and multichannel thermometer, which are controlled by a microprocessor, in order to be used at ITU TRIGA Mark-II Reactor is presented. The system works as a simple microcomputer, which includes a CPU, a EPROM, a RAM, a CTC, a PIO, a PIA a keyboard and displays, using the assembly language. The period meter can work either with pulse signal or with analog signal depending on demand of the user. The period is calculated by software and its range is -99,9 sec, to +2.1 sec. When the period drops +3 sec, the system gives alarm illuminating a LED. The multichannel thermometer has eight temperature channels. Temperature channels can manually or automatically be selected. The channel selection time can be adjusted. The thermometer gives alarm illuminating a LED, when the temperature rises to 600 C. Temperature data is stored in the RAM and is shown on a display. This system provides us to use four spare thermocouples in the reactor. (orig.)

  2. The Microprocessor controls the activity of mammalian retrotransposons

    DEFF Research Database (Denmark)

    Heras, Sara R.; Macias, Sara; Plass, Mireya

    2013-01-01

    RNA biogenesis, also recognizes and binds RNAs derived from human long interspersed element 1 (LINE-1), Alu and SVA retrotransposons. Expression analyses demonstrate that cells lacking a functional Microprocessor accumulate LINE-1 mRNA and encoded proteins. Furthermore, we show that structured regions...

  3. Design description of a microprocessor based Engine Monitoring and Control unit (EMAC) for small turboshaft

    Science.gov (United States)

    Baez, A. N.

    1985-01-01

    Research programs have demonstrated that digital electronic controls are more suitable for advanced aircraft/rotorcraft turbine engine systems than hydromechanical controls. Commercially available microprocessors are believed to have the speed and computational capability required for implementing advanced digital control algorithms. Thus, it is desirable to demonstrate that off-the-shelf microprocessors are indeed capable of performing real time control of advanced gas turbine engines. The engine monitoring and control (EMAC) unit was designed and fabricated specifically to meet the requirements of an advanced gas turbine engine control system. The EMAC unit is fully operational in the Army/NASA small turboshaft engine digital research program.

  4. Microprocessors principles and applications

    CERN Document Server

    Debenham, Michael J

    1979-01-01

    Microprocessors: Principles and Applications deals with the principles and applications of microprocessors and covers topics ranging from computer architecture and programmed machines to microprocessor programming, support systems and software, and system design. A number of microprocessor applications are considered, including data processing, process control, and telephone switching. This book is comprised of 10 chapters and begins with a historical overview of computers and computing, followed by a discussion on computer architecture and programmed machines, paying particular attention to t

  5. Application of a 16-bit microprocessor to the digital control of machine tools

    International Nuclear Information System (INIS)

    Issaly, Alain

    1979-01-01

    After an overview of machine tools (various types, definition standardization, associated technologies for motors and position sensors), this research thesis describes the principles of computer-based digital control: classification of machine tool command systems, machining programming, programming languages, dialog function, interpolation function, servo-control function, tool compensation function. The author reports the application of a 16-bit microprocessor to the computer-based digital control of a machine tool: feasibility, selection of microprocessor, hardware presentation, software development and description, machining mode, translation-loading mode

  6. The micro-processor controlled process radiation monitoring system for reactor safety systems

    International Nuclear Information System (INIS)

    Mizuno, K.; Noguchi, A.; Kumagami, S.; Gotoh, Y.; Kumahara, T.; Arita, S.

    1986-01-01

    Digital computers are soon expected to be applied to various real-time safety and safety-related systems in nuclear power plants. Hitachi is now engaged in the development of a micro-processor controlled process radiation monitoring system, which operates on digital processing methods employed with a log ratemeter. A newly defined methodology of design and test procedures is being applied as a means of software program verification for these safety systems. Recently implemented micro-processor technology will help to achieve an advanced man-machine interface and highly reliable performance. (author)

  7. Microprocessor control unit of thyristor regulator of microhydroelectric power station ballast load

    International Nuclear Information System (INIS)

    Nomokonova, Yu; Bogdanov, E

    2014-01-01

    The operational principle of microhydroelectric power station ballast load is presented. The comparative overview of the mathematical modeling methods is performed. The ranges of thyristors optimal work are shown as a result of the regulator regimes analysis. Shows the necessity of regulation the ballast load in microhydroelectric power station with help of developed algorithm of the program for microprocessor control

  8. A new design approach for control circuits of pipelined single-flux-quantum microprocessors

    International Nuclear Information System (INIS)

    Yamanashi, Y; Akimoto, A; Yoshikawa, N; Tanaka, M; Kawamoto, T; Kamiya, Y; Fujimaki, A; Terai, H; Yorozu, S

    2006-01-01

    A novel method of design for controllers of pipelined microprocessors using single-flux-quantum (SFQ) logic has been proposed. The proposed design approach is based on one hot encoding and is very suitable for designing a finite state machine using SFQ logic circuits, where each internal state of the microprocessor is represented by a flip-flop. In this approach, decoding of the internal state can be performed instantaneously, in contrast to the case in the conventional method using a binary state register. Moreover, pipelining is effectively implemented without increasing the circuit size because no pipeline registers are required in the one hot encoding. By using this method, we have designed a controller for our new SFQ microprocessors, which employs pipelining. The number of Josephson junctions of the newly designed controller is 1067, while the previous version without pipelining contains 1721 Josephson junctions. These results indicate that the proposed design approach is very effective for pipelined SFQ microprocessors. We have implemented a new controller using the NEC 2.5 kA cm -2 Nb standard process and confirmed its correct operation experimentally

  9. Instrument for bone mineral measurement using a microprocessor as the control and arithmetic element

    International Nuclear Information System (INIS)

    Alberi, J.L.; Hardy, W.H. II.

    1975-11-01

    A self-contained instrument for the determination of bone mineral content by photon absorptometry is described. A high-resolution detection system allows measurements to be made at up to 16 photon energies. Control and arithmetic functions are performed by a microprocessor. Analysis capability and limitations are discussed

  10. Adapting to change: influence of a microprocessor-controlled prosthetic knee on gait adaptations

    NARCIS (Netherlands)

    Prinsen, Erik Christiaan

    2016-01-01

    Advancement in prosthetic knee design have led to the introduction of microprocessor-controlled prosthetic knees (MPKs). MPKs incorporate sensors that are able to measure prosthetic loading, the knee angle, and knee angular velocity. Based on the sensor information, MPKs determine the optimal level

  11. Design of a microprocessor-based Control, Interface and Monitoring (CIM unit for turbine engine controls research

    Science.gov (United States)

    Delaat, J. C.; Soeder, J. F.

    1983-01-01

    High speed minicomputers were used in the past to implement advanced digital control algorithms for turbine engines. These minicomputers are typically large and expensive. It is desirable for a number of reasons to use microprocessor-based systems for future controls research. They are relatively compact, inexpensive, and are representative of the hardware that would be used for actual engine-mounted controls. The Control, Interface, and Monitoring Unit (CIM) contains a microprocessor-based controls computer, necessary interface hardware and a system to monitor while it is running an engine. It is presently being used to evaluate an advanced turbofan engine control algorithm.

  12. The use of microprocessors at TRIUMF in the control of radiation safety interlock systems

    International Nuclear Information System (INIS)

    King, L.

    1988-01-01

    At TRIUMF the cyclotron vault, all primary beam lines, and each experimental area has a dedicated control unit to manage the safety interlock control of the area lockup sequence, beam blocker drive and area access. Typically each area has 24 devices which are monitored to control 16 outputs. These control units (Area Safety Units) were first implemented through the use of relay logic. The relay logic was reliable but difficult to modify to incorporate changes to the areas. In 1979 it was decided to use microprocessors in the form of single board computers to control the Area Safety Units. The details of the hardware and software is discussed as well as the advantages of microprocessor control

  13. Emulation of MS DOS Operational System on the Autonomous Crate-Controller with I8086 microprocessor

    International Nuclear Information System (INIS)

    Hons, Z.; Cizek, P.; Streit, V.

    1988-01-01

    KM-DOS operating system for CAMAC autonomous crate-controller based on Intel 8086/8087 microprocessor connected with Pravec-16 IBM PC is described. The KM-DOS system fully emulates the MS DOS environment on the CAMAC controller. Thus ASSEMBLER, FORTRAN, C and PASCAL programs compiled and linked on IBM PC and compatible can be run on the CAMAC controller and parall work of both computers is enabled

  14. Microprocessor-controlled inhalation system for repeated exposure of animals to aerosols

    International Nuclear Information System (INIS)

    Carpenter, R.L.; Barr, F.P.; Leydig, R.L.; Rajala, R.E.

    1979-01-01

    A microprocessor-controlled inhalation exposure system (MCIES) has been built to automate aerosol generation and sampling while controlling exposure time for animal toxicity studies. The system has a time resolution of 0.1 s and automatically sequences the exposure events from initiation to temination of the exposure. The operator is required to preset all airflows, read in a paper tape containing the time sequence of events, and initiate the automatic sequence by closing a switch

  15. Front end embedded microprocessors in the JET computer-based control system, past, present and future

    International Nuclear Information System (INIS)

    Steed, C.A.; VanderBeken, H.; Browne, M.L.; Fullard, K.; Reed, K.; Tilley, M.; Schmidt, V.

    1987-01-01

    A brief history of the use of Front End Microprocessors in the JET Control and Data Acquisition System (CODAS) is presented. The present expansion in their use from 2 or 3 in 1983 to 27 now, is covered along with the reasoning behind their present usage. Finally, their future planned use in the area of remote handling is discussed and the authors present views on the use of front end processing in future large distributed control systems are presented

  16. AFRRI's conversion to a microprocessor-based reactor instrumentation and control system

    International Nuclear Information System (INIS)

    Moore, Mark L.; Hodgdon, Kenneth M.

    1986-01-01

    The Armed Forces Radiobiology Research Institute (AFRRI) is procuring a state-of- the-art microprocessor-based instrumentation and control system to operate AFRRI's 1 MW (steady-state), 3000 MW (pulse) TRIGA Mark-F reactor. This system will replace the current control console while improving or maintaining the existing operational capabilities and safety characteristics. The new unit will have a 15-year design life using state-of-the-art components

  17. Development of a microprocessor controller for stand-alone photovoltaic power systems

    Science.gov (United States)

    Millner, A. R.; Kaufman, D. L.

    1984-01-01

    A controller for stand-alone photovoltaic systems has been developed using a low power CMOS microprocessor. It performs battery state of charge estimation, array control, load management, instrumentation, automatic testing, and communications functions. Array control options are sequential subarray switching and maximum power control. A calculator keypad and LCD display provides manual control, fault diagnosis and digital multimeter functions. An RS-232 port provides data logging or remote control capability. A prototype 5 kW unit has been built and tested successfully. The controller is expected to be useful in village photovoltaic power systems, large solar water pumping installations, and other battery management applications.

  18. A microprocessor-controlled assay for the estimation of human placental lactogen

    International Nuclear Information System (INIS)

    Adam, T.; Roulston, J.E.; Bagshawe, K.D.

    1979-01-01

    A radioimmunoassay for human placental lactogen (HPL) is described using the KEMTEK 3000, which is a modular radioimmunoassay apparatus controlled by a microprocessor. Operation of the KEMTEK 3000 is largely automatic and it requires minimal intervention from the operator. It is capable of 300 reactions per hour so that a large number of estimations can readily be performed. HPL was assayed by a double antibody method on serum samples from pregnant women and patients with trophoblastic tumours. (Auth.)

  19. Autonomous controller (JCAM 10) for CAMAC crate with 8080 (INTEL) microprocessor

    International Nuclear Information System (INIS)

    Gallice, P.; Mathis, M.

    1975-01-01

    The CAMAC crate autonomous controller JCAM-10 is designed around an INTEL 8080 microprocessor in association with a 5K RAM and 4K REPROM memory. The concept of the module is described, in which data transfers between CAMAC modules and the memory are optimised from software point of view as well as from execution time. In fact, the JCAM-10 is a microcomputer with a set of 1000 peripheral units represented by the CAMAC modules commercially available

  20. Designs and performance of three new microprocessor-controlled knee joints.

    Science.gov (United States)

    Thiele, Julius; Schöllig, Christina; Bellmann, Malte; Kraft, Marc

    2018-02-09

    A crossover design study with a small group of subjects was used to evaluate the performance of three microprocessor-controlled exoprosthetic knee joints (MPKs): C-Leg 4, Plié 3 and Rheo Knee 3. Given that the mechanical designs and control algorithms of the joints determine the user outcome, the influence of these inherent differences on the functional characteristics was investigated in this study. The knee joints were evaluated during level-ground walking at different velocities in a motion analysis laboratory. Additionally, technical analyses using patents, technical documentations and X-ray computed tomography (CT) for each knee joint were performed. The technical analyses showed that only C-Leg 4 and Rheo Knee 3 allow microprocessor-controlled adaptation of the joint resistances for different gait velocities. Furthermore, Plié 3 is not able to provide stance extension damping. The biomechanical results showed that only if a knee joint adapts flexion and extension resistances by the microprocessor all known advantages of MPKs can become apparent. But not all users may benefit from the examined functions: e.g. a good accommodation to fast walking speeds or comfortable stance phase flexion. Hence, a detailed comparison of user demands and performance of the designated knee joint is mandatory to ensure a maximum in user outcome.

  1. Microprocessor Based Temperature Control of Liquid Delivery with Flow Disturbances.

    Science.gov (United States)

    Kaya, Azmi

    1982-01-01

    Discusses analytical design and experimental verification of a PID control value for a temperature controlled liquid delivery system, demonstrating that the analytical design techniques can be experimentally verified by using digital controls as a tool. Digital control instrumentation and implementation are also demonstrated and documented for…

  2. Microprocessor-controlled meter of high Q-values

    International Nuclear Information System (INIS)

    Bun'kov, S.N.; Konstantinov, V.I.; Masalov, V.L.; Sevrukova, L.M.; Tokarev, A.D.; Usiv, Yu.V.

    1990-01-01

    The paper describes the functional model of a high-precision microcomputer-controlled test facility for studying the electric and physical parameters of superconducting cavities. The basic unit of the test facility is high-stability retunable RF oscillator. It is designed following the scheme of the frequency phase tuning using standard equipment. The systematic error in measuring the loaded Q-value of reentrant cavities is not larger than 5%. A dedicated built-in microcomputer is used to control the measuring test facility and to make the commutations required. 2 refs.; 2 figs

  3. Data acquisition and command system for use with a microprocessor-based control chassis

    International Nuclear Information System (INIS)

    Halbig, J.K.; Klosterbuer, S.F.; Martinez, V.A. Jr.

    1980-01-01

    The Pion Generation for Medical Irradiations (PIGMI) program at the Los Alamos Scientific Laboratory is developing the technology to build smaller, less expensive, and more reliable proton linear accelerators for medical applications, and has designed a powerful, simple, inexpensive, and reliable control and data acquisition system that is central to the program development. The system is a NOVA-3D minicomputer interfaced to several outlying microprocessor-based controllers, which accomplish control and data acquisition through data I/O chasis. The equipment interface chassis, which can issue binary commands, read binary data, issue analog commands, and read timed and untimed analog data is described

  4. Synthetic pulse radar including a microprocessor based controller

    International Nuclear Information System (INIS)

    Fowler, J.C.; Rubin, L.A.; Still, W.L.

    1980-01-01

    This invention relates to pulse radar detection of targets in extended media, including natural phenomena such as oil, coal and ore deposits within the earth. In particular, this invention relates to a pulse radar system employing a synthetic pulse formed from a fourier spectrum of frequencies generated and detected by a digitally controlled transmitter and receiver circuits

  5. ITRA 084 - a microprocessor controlled rapid analyzer in mining and metallurgy

    International Nuclear Information System (INIS)

    Kliem, V.; Kreher, M.; Boy, N.

    1986-01-01

    A new rapid analyzer of the ITRA series has been developed at the Freiberg Research Institute of Non-Ferrous Metals for single and multi-element analysis in mining and non-ferrous metallurgy. INTRA-08 represents an efficient microprocessor-controlled on-line X-ray fluorescence analyzer based on the main principles utilized with success hitherto in device engineering (isotope excitation, four-channel modification, balance filter method). A U880 single-chip microcomputer provides the central control of the device including the execution of an extensive program for the matrix correction. The efficiency of the analyzer is demonstrated taking measured values as a basis

  6. A CAMAC-resident microprocessor used for field control of a dipole magnet

    International Nuclear Information System (INIS)

    Sharp, F.J.; Greiner, B.F.

    1990-01-01

    An inexpensive, self-contained microprocessor supporting an on-chip BASIC interpreter has been incorporated into a CAMAC auxiliary-crate controller, with an EEPROM and a terminal port. Used with an ASCII computer terminal, the intelligent auxiliary controller is a self-contained program-development system. One application for the intelligent auxiliary controller is closed-loop control of the analyzing dipoles at the negative-ion injector of the TASCC (tandem accelerator superconducting cyclotron) heavy-ion accelerators. A BASIC program stored in the EEPROM runs on power-up of the controller. The program reads control numbers from a CAMAC mailbox, converts the ASCII character string from a precision Hall-probe teslameter to a digital field reading, and writes a control number to the dipole controller. The program iterates until the dipole reaches the demand field, while updating another CAMAC mailbox with a field readback for the main control system. (orig.)

  7. Microprocessor interfacing

    CERN Document Server

    Vears, R E

    2014-01-01

    Microprocessor Interfacing provides the coverage of the Business and Technician Education Council level NIII unit in Microprocessor Interfacing (syllabus U86/335). Composed of seven chapters, the book explains the foundation in microprocessor interfacing techniques in hardware and software that can be used for problem identification and solving. The book focuses on the 6502, Z80, and 6800/02 microprocessor families. The technique starts with signal conditioning, filtering, and cleaning before the signal can be processed. The signal conversion, from analog to digital or vice versa, is expl

  8. Microprocessor-controlled tester for evaluation of the Self-Energized Credential System (SECS)

    International Nuclear Information System (INIS)

    Corlis, N.E.

    1980-03-01

    The Self-Energized Credential System (SECS) was developed for use in the Plutonium Protection System (PPS) installed at Hanford, Washington. Evaluation and development of the SECS system was enhanced by the use of a microprocessor-controlled portal tester. This tester used infrared (ir) beam sensors to provide information on the direction of travel of the credential wearer and to detect inoperative credentials. A printed record of the portal number, actual code read, time, and direction of the credential passage provided information essential to an assessment of the operability of the SECS

  9. Microprocessor-controlled data-acquisition instrument for neutron-activation measurements

    International Nuclear Information System (INIS)

    Jones, B.A.

    1981-01-01

    This paper describes a microprocessor controlled data acquisition instrument designed at Lawrence Livermore National Laboratory to provide experimenters with a diagnostic tool for measuring the performance of laser imploded fusion targets via neutron activation techniques. This instrument features the ability to count four independent inputs simultaneously while providing a front panel readout of these inputs, plus a time of day clock. A hardcopy printout of the data is also provided by a built-in thermal printer. All running modes and parameters are user selectable via a front panel keypad, and a complete set of internal self-testing diagnostics are available for debug

  10. Microprocessor-based control for independently-phased RF linac cavities

    International Nuclear Information System (INIS)

    Dawson, J.W.

    1979-01-01

    A microprocessor based system has been built to control the RF amplifiers associated with independently phased linac cavities. The system has an 8080A at each amplifier station, together with associated ROM, RAM, I/O, etc. At a central NOVA 3 computer an additional 8080A system is incorporated in the interface to the NOVA I/O bus. The NOVA interface is connected by a bus of eighteen twisted pairs to each amplifier station, providing bilateral transmission between each station and the NOVA. The system architecture, bus protocol, and operating characteristics are described

  11. Experience in the installation of a microprocessor system for controlling converter units of the Vyborg substation

    International Nuclear Information System (INIS)

    Gusakovskii, K. B.; Zmaznov, E. Yu.; Katantsev, S. V.; Mazurenko, A. K.; Mestergazi, V. A.; Prochan, G. G.; Funtikova, S. F.

    2006-01-01

    The experience in the installation of modern digital systems for controlling converter units at the Vyborg converter substation on the basis of advanced microprocessor devices is considered. It is shown that debugging of a control and protection system on mathematical and physical models does not guarantee optimum control of actual converter devices. Examples of advancing the control and protection system are described, the necessity for which has become obvious in tests of actual equipment. Comparison of oscillograms of processes before optimization of the control system and after its optimization and adjustment shows that the digital control system makes it possible to improve substantially the algorithms of control and protection in the short term and without changing the hardware component

  12. The microprocessor boom

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    The applications of microprocessors in high energy physics experiments are discussed. Many benefits are predicted for data acquisition and handling systems and for control and monitoring functions. (W.D.L.).

  13. The HXR80M-balloon experiment: a microprocessor-controlled transatlantic payload

    International Nuclear Information System (INIS)

    Ubertini, P.; Bazzano, A.; Boccaccini, L.

    1980-01-01

    Following the results obtained from the succesful transatlantic flight launched during the summer 1976 from the CNR Milo Base, Sicily, the Laboratorio di Astrofisica Spaziale has started a new program in the hard X-ray astronomy field. It basically consists in the development of high resolution large area Multiwire Proportional Chambers to be employed in long duration balloon flights to study and monitor galactic and extragalactic sources. This note will describe the flight configuration and performances of the HXR80M payload. The experiment is expected to fly during July 1980 from the Milo Base in the framework of the CNR experimental balloon campaign. The note will analyze the main characteristics of the detectors employed, of the data handling electronics and in particular of the hardware and the software of the on-board microprocessor controlled multichannel analyzer. In fact the limitation due to the low bit rate HF link (1.2kbit/s) and the long flight duration (about one week) make imperative the use of an on-board microprocessor system to handle and select in real time the scientific data and to control the housekeeping and the telecommand systems

  14. Microprocessor engineering

    CERN Document Server

    Holdsworth, B

    2013-01-01

    Microprocessor Engineering provides an insight in the structures and operating techniques of a small computer. The book is comprised of 10 chapters that deal with the various aspects of computing. The first two chapters tackle the basic arithmetic and logic processes. The third chapter covers the various memory devices, both ROM and RWM. Next, the book deals with the general architecture of microprocessor. The succeeding three chapters discuss the software aspects of machine operation, while the last remaining three chapters talk about the relationship of the microprocessor with the outside wo

  15. Microprocessor hardware reliability

    Energy Technology Data Exchange (ETDEWEB)

    Wright, R I

    1982-01-01

    Microprocessor-based technology has had an impact in nearly every area of industrial electronics and many applications have important safety implications. Microprocessors are being used for the monitoring and control of hazardous processes in the chemical, oil and power generation industries, for the control and instrumentation of aircraft and other transport systems and for the control of industrial machinery. Even in the field of nuclear reactor protection, where designers are particularly conservative, microprocessors are used to implement certain safety functions and may play increasingly important roles in protection systems in the future. Where microprocessors are simply replacing conventional hard-wired control and instrumentation systems no new hazards are created by their use. In the field of robotics, however, the microprocessor has opened up a totally new technology and with it has created possible new and as yet unknown hazards. The paper discusses some of the design and manufacturing techniques which may be used to enhance the reliability of microprocessor based systems and examines the available reliability data on lsi/vlsi microcircuits. 12 references.

  16. Energy conservation applications of microprocessors

    Energy Technology Data Exchange (ETDEWEB)

    Shih, James Y.

    1979-07-01

    A survey of the application of microprocessors for industrial and commercial energy conservation has been made. Microprocessor applications for HVAC, chiller control, and automotive equipment are discussed. A case study of successful replacement of a conventional cooling plant control is recounted. The rapid advancement of microelectronic technology will affect efficient energy control, more sophisticated control methodology, and more investment in controls.

  17. System and method for leveraging human physiological traits to control microprocessor frequency

    Energy Technology Data Exchange (ETDEWEB)

    Shye, Alex; Pan, Yan; Scholbrock, Benjamin; Miller, J. Scott; Memik, Gokhan; Dinda, Peter A; Dick, Robert P

    2014-03-25

    A system and method for leveraging physiological traits to control microprocessor frequency are disclosed. In some embodiments, the system and method may optimize, for example, a particular processor-based architecture based on, for example, end user satisfaction. In some embodiments, the system and method may determine, for example, whether their users are satisfied to provide higher efficiency, improved reliability, reduced power consumption, increased security, and a better user experience. The system and method may use, for example, biometric input devices to provide information about a user's physiological traits to a computer system. Biometric input devices may include, for example, one or more of the following: an eye tracker, a galvanic skin response sensor, and/or a force sensor.

  18. Immediate effects of a new microprocessor-controlled prosthetic knee joint: a comparative biomechanical evaluation.

    Science.gov (United States)

    Bellmann, Malte; Schmalz, Thomas; Ludwigs, Eva; Blumentritt, Siegmar

    2012-03-01

    To investigate the immediate biomechanical effects after transition to a new microprocessor-controlled prosthetic knee joint. Intervention cross-over study with repeated measures. Only prosthetic knee joints were changed. Motion analysis laboratory. Men (N=11; mean age ± SD, 36.7±10.2y; Medicare functional classification level, 3-4) with unilateral transfemoral amputation. Two microprocessor-controlled prosthetic knee joints: C-Leg and a new prosthetic knee joint, Genium. Static prosthetic alignment, time-distance parameters, kinematic and kinetic parameters, and center of pressure. After a half-day training and an additional half-day accommodation, improved biomechanical outcomes were demonstrated by the Genium: lower ground reaction forces at weight acceptance during level walking at various velocities, increased swing phase flexion angles during walking on a ramp, and level walking with small steps. Maximum knee flexion angle during swing phase at various velocities was nearly equal for Genium. Step-over-step stair ascent with the Genium knee was more physiologic as demonstrated by a more equal load distribution between the prosthetic and contralateral sides and a more natural gait pattern. When descending stairs and ramps, knee flexion moments with the Genium tended to increase. During quiet stance on a decline, subjects using Genium accepted higher loading of the prosthetic side knee joint, thus reducing same side hip joint loading as well as postural sway. In comparision to the C-Leg, the Genium demonstrated immediate biomechanical advantages during various daily ambulatory activities, which may lead to an increase in range and diversity of activity of people with above-knee amputations. Results showed that use of the Genium facilitated more natural gait biomechanics and load distribution throughout the affected and sound musculoskeletal structure. This was observed during quiet stance on a decline, walking on level ground, and walking up and down ramps and

  19. Microprocessor control and data acquisition at the LLNL 100-MeV accelerator

    International Nuclear Information System (INIS)

    Mendonca, M.L.

    1981-01-01

    A distributed microprocessor control and data acquisition network has been designed for implementation on the Lawrence Livermore National Laboratory 100 MeV electron/positron accelerator (LINAC). The system has been designed to be as transparent to the user as possible by stressing responsiveness, reliability, and relevance of data presented to the user. Implementation of the network will take place in modular fashion in three stages, so as to minimize disruption of normal operations. The first elements to be installed will be the beam transport system controls, beam set-up time. Beam diagnostic equipment is now being position monitors, and accelerator operating status monitors. These units will reduce beam set-up time. Beam diagnostic equipment is now being designed that will be used in a second stage implementation. This stage will concentrate on determining beam parameters and allowing the user to optimize the beam for a given parameter. The final stage will be to install experimenter data acquisition equipment. The equipment will augment the presently existing data acquisition system. The completed network will allow a more efficient operation of the LINAC, resulting in reduced experiment costs, and more controllable beam parameters, both of which are major concerns of experimenters

  20. Microprocessor-controlled Nd:YAG laser for hyperthermia induction in the RIF-1 tumor.

    Science.gov (United States)

    Waldow, S M; Russell, G E; Wallner, P E

    1992-01-01

    Near-infrared radiation from a Nd:YAG laser at 1,064 nm was used interstitially or superficially to induce hyperthermia in RIF-1 tumors in C3H male mice. A single 600-microns quartz fiber with a 0.5-cm cylindrical diffusor or a weakly diverging microlens at its distal end was used to deliver laser energy to tumors in the hind leg (mean volume = 100 mm3). Two thermocouples were inserted into each tumor. One thermocouple controlled a microprocessor-driven hyperthermia program (maximum output of 3.5 Watts) to maintain the desired temperature. Tumors were exposed to various temperature-time combinations (42-45 degrees C/30 min). Our initial results indicated that excellent temperature control to within 0.2 degrees C of the desired temperature at the feedback thermocouple was achievable during both superficial and interstitial heat treatments. Temperatures at the second thermocouple, however, were found to be lower by as much as 2.3 degrees C (using the cylindrical diffusor) or higher by up to 4.6 degrees C (using the microlens) when compared to the feedback thermocouple temperature. Several correlations were seen between total dose, tumor growth delay, percent skin necrosis, and temperature at the second thermocouple after several superficial and interstitial treatments. Statistically significant improvements in tumor growth delay (at 42 and 45 degrees C) and increased percent skin necrosis at all temperatures were observed after superficial versus interstitial treatment.

  1. An 'intelligent' approach to radioimmunoassay sample counting employing a microprocessor-controlled sample counter

    International Nuclear Information System (INIS)

    Ekins, R.P.; Sufi, S.; Malan, P.G.

    1978-01-01

    The enormous impact on medical science in the last two decades of microanalytical techniques employing radioisotopic labels has, in turn, generated a large demand for automatic radioisotopic sample counters. Such instruments frequently comprise the most important item of capital equipment required in the use of radioimmunoassay and related techniques and often form a principle bottleneck in the flow of samples through a busy laboratory. It is therefore imperative that such instruments should be used 'intelligently' and in an optimal fashion to avoid both the very large capital expenditure involved in the unnecessary proliferation of instruments and the time delays arising from their sub-optimal use. Most of the current generation of radioactive sample counters nevertheless rely on primitive control mechanisms based on a simplistic statistical theory of radioactive sample counting which preclude their efficient and rational use. The fundamental principle upon which this approach is based is that it is useless to continue counting a radioactive sample for a time longer than that required to yield a significant increase in precision of the measurement. Thus, since substantial experimental errors occur during sample preparation, these errors should be assessed and must be related to the counting errors for that sample. The objective of the paper is to demonstrate that the combination of a realistic statistical assessment of radioactive sample measurement, together with the more sophisticated control mechanisms that modern microprocessor technology make possible, may often enable savings in counter usage of the order of 5- to 10-fold to be made. (author)

  2. 'Intelligent' approach to radioimmunoassay sample counting employing a microprocessor controlled sample counter

    International Nuclear Information System (INIS)

    Ekins, R.P.; Sufi, S.; Malan, P.G.

    1977-01-01

    The enormous impact on medical science in the last two decades of microanalytical techniques employing radioisotopic labels has, in turn, generated a large demand for automatic radioisotopic sample counters. Such instruments frequently comprise the most important item of capital equipment required in the use of radioimmunoassay and related techniques and often form a principle bottleneck in the flow of samples through a busy laboratory. It is therefore particularly imperitive that such instruments should be used 'intelligently' and in an optimal fashion to avoid both the very large capital expenditure involved in the unnecessary proliferation of instruments and the time delays arising from their sub-optimal use. The majority of the current generation of radioactive sample counters nevertheless rely on primitive control mechanisms based on a simplistic statistical theory of radioactive sample counting which preclude their efficient and rational use. The fundamental principle upon which this approach is based is that it is useless to continue counting a radioactive sample for a time longer than that required to yield a significant increase in precision of the measurement. Thus, since substantial experimental errors occur during sample preparation, these errors should be assessed and must be releted to the counting errors for that sample. It is the objective of this presentation to demonstrate that the combination of a realistic statistical assessment of radioactive sample measurement, together with the more sophisticated control mechanisms that modern microprocessor technology make possible, may often enable savings in counter usage of the order of 5-10 fold to be made. (orig.) [de

  3. Replacement of the control and instrumentation system with the microprocessor based systems in Japanese PWR plants

    International Nuclear Information System (INIS)

    Hayashi, N.

    1998-01-01

    In Ohi Units 3 and 4, Ikata Unit 3, and Genkai Units 3 and 4, the latest of PWR plants now under operation in Japan, the reactor control system and turbine control system employ the microprocessor base digital control systems with a view to improving reliability, operability and maintainability. In the next stage plants, another application of such digital system is also planned for the instrumentation rack for the reactor protection system for further improvement. On the other hand, in Mihama Unit 1, the first of domestic PWR plants, and later plants except for the latest 5 plants, analog control systems are employed for the instrumentation racks. For the analog control systems of these plants, FOXBORO H-Line instruments, equivalent domestic box type instruments or WH7300 Series card type instruments were initially employed, and later replaced with domestic card type control systems after 10-15 year operation. However, 8-12 years have passed since these replacements, so the 15th year generally quoted as an interval for replacing C and I systems is near at hand. This is the time to consider next replacement. This replacement will be based on the latest digital technology. However, it is not practical way for the existing plants to apply the same integrated digital C and I system configuration for the next stage plants, because it requires the drastic change of the C and I system configuration and significant cost-up. Therefore, we must investigate the optimum digital C and I system configuration for the existing system. (author)

  4. Proceedings of the meeting on applications of microprocessors in accelerator controls and physics experiments, Tsukuba, March 15, 1978

    International Nuclear Information System (INIS)

    Shibata, Shinkichi; Katoh, Tadahiko

    1978-05-01

    The microprocessor was first made public in 1971. In the ensuing few years, its performance has risen, cost lowered and interface more in IC, so it is now easily incorporated in instrumentation and control. Since it is used as electronic component unlike the case of a minicomputer, it has so much larger influence. It differs from the conventional electronic components in that software is required. In the National Laboratory for High Energy Physics, microprocessors are used for performance improvements of the measuring and control instruments and for labor saving. For new component not to induce new other problems, support system and standardization are proceeding for utilization development etc. The present meeting was intended for discussions by people in the field of usage, planning, and means of joint uses for software and hardware. (Mori, K.)

  5. Stair ascent with an innovative microprocessor-controlled exoprosthetic knee joint.

    Science.gov (United States)

    Bellmann, Malte; Schmalz, Thomas; Ludwigs, Eva; Blumentritt, Siegmar

    2012-12-01

    Climbing stairs can pose a major challenge for above-knee amputees as a result of compromised motor performance and limitations to prosthetic design. A new, innovative microprocessor-controlled prosthetic knee joint, the Genium, incorporates a function that allows an above-knee amputee to climb stairs step over step. To execute this function, a number of different sensors and complex switching algorithms were integrated into the prosthetic knee joint. The function is intuitive for the user. A biomechanical study was conducted to assess objective gait measurements and calculate joint kinematics and kinetics as subjects ascended stairs. Results demonstrated that climbing stairs step over step is more biomechanically efficient for an amputee using the Genium prosthetic knee than the previously possible conventional method where the extended prosthesis is trailed as the amputee executes one or two steps at a time. There is a natural amount of stress on the residual musculoskeletal system, and it has been shown that the healthy contralateral side supports the movements of the amputated side. The mechanical power that the healthy contralateral knee joint needs to generate during the extension phase is also reduced. Similarly, there is near normal loading of the hip joint on the amputated side.

  6. The Use of a Microprocessor-Controlled, Video Output Atomic Absorption Spectrometer as an Educational Tool in a Two-Year Technical Curriculum.

    Science.gov (United States)

    Kerfoot, Henry B.

    Based on instructional experiences at Charles County Community College, Maryland, this report examines the pedagogical advantage of teaching atomic absorption (AA) spectroscopy with an AA spectrophotometer that is equipped with a microprocessor and video output mechanism. The report first discusses the growing importance of AA spectroscopy in…

  7. Dual photon absorptiometer utilizing a HpGe detector and microprocessor controller

    International Nuclear Information System (INIS)

    Ellis, K.J.; Vartsky, D.; Pearlstein, T.B.; Alberi, J.L.; Cohn, S.H.

    1978-01-01

    The analysis of bone mineral content (BMC) using a single energy-photon beam assumes that there are only two materials present, bone mineral and a uniform soft tissue component. Uncertainty in the value of BMC increases with different adipose tissue components in the transmitted beam. These errors, however, are reduced by the dual energy technique. Also, extension to additional energies further identifies the separate constituents of the soft tissue component. A multi-energy bone scanning apparatus with data acquisition and analysis capability sufficient to perform multi-energy analysis of bone mineral content was designed and developed. The present work reports on the development of device operated in the dual energy mode. The high purity germanium (HpGe) detector is an integral component of the scanner. Errors in BMC due to multiple small angle scatters are reduced due to the excellent energy resolution of the detector (530 eV at 60 keV). Also, the need to filter the source or additional collimation on the detector is eliminated. A new dual source holder was designed using 200 mCi 125 I and 100 mCi 241 Am. The active areas of the two source capsules are aligned on a common axis. The congruence of the dual source was verified by measuring the collimator response function. This new holder design insures that the same tissue mass simultaneously attenuates both sources. The controller portion of the microprocessor allows for variation in total scan length, step size, and counting time per step. These options allow for multiple measurements without changes in the detector, source, or collimator. The system has been successfully used to determine the BMC content of different bones

  8. Microprocessor-controlled time domain reflectometer for dynamic shock position measurements

    International Nuclear Information System (INIS)

    Virchow, C.F.; Conrad, G.E.; Holt, D.M.; Hodson, E.K.

    1980-01-01

    Time-domain reflectometry is used in a novel way to measure dynamically shock propagation in various media. The primary component in this measurement system is a digital time domain reflectometer, which uses local intelligence, a Motorola 6800 microprocessor, to make the unit adaptable and versatile. The recorder, its operating theory and its method of implementation are described and typical data are reviewed. Applications include nuclear explosion yield estimates and explosive energy flow measurements

  9. Microprocessor Activity Controls Differential miRNA Biogenesis In Vivo

    Directory of Open Access Journals (Sweden)

    Thomas Conrad

    2014-10-01

    Full Text Available In miRNA biogenesis, pri-miRNA transcripts are converted into pre-miRNA hairpins. The in vivo properties of this process remain enigmatic. Here, we determine in vivo transcriptome-wide pri-miRNA processing using next-generation sequencing of chromatin-associated pri-miRNAs. We identify a distinctive Microprocessor signature in the transcriptome profile from which efficiency of the endogenous processing event can be accurately quantified. This analysis reveals differential susceptibility to Microprocessor cleavage as a key regulatory step in miRNA biogenesis. Processing is highly variable among pri-miRNAs and a better predictor of miRNA abundance than primary transcription itself. Processing is also largely stable across three cell lines, suggesting a major contribution of sequence determinants. On the basis of differential processing efficiencies, we define functionality for short sequence features adjacent to the pre-miRNA hairpin. In conclusion, we identify Microprocessor as the main hub for diversified miRNA output and suggest a role for uncoupling miRNA biogenesis from host gene expression.

  10. Microprocessorized message multiplexer

    International Nuclear Information System (INIS)

    Ejzman, S.; Guglielmi, L.; Jaeger, J.J.

    1980-07-01

    The 'Microprocessorized Message Multiplexer' is an elementary development tool used to create and debug the software of a target microprocessor (User Module: UM). It connects together four devices: a terminal, a cassette recorder, the target microprocessor and a host computer where macro and editor for the M 6800 microprocessor are resident [fr

  11. Microprocessorized NMR measurement

    International Nuclear Information System (INIS)

    Rijllart, A.

    1984-01-01

    An MC68000 CAMAC microprocessor system for fast and accurate NMR signal measurement will be presented. A stand-alone CAMAC microprocessor system (MC68000 STAC) with a special purpose interface sweeps a digital frequency synthesizer and digitizes the NMR signal with a 16-bit ADC of 17 μs conversion time. It averages the NMR signal data over many sweeps and then transfers it through CAMAC to a computer for calculation of the signal parameters. The computer has full software control over the timing and sweep settings of this signal averager, and thus allows optimization of noise suppression. Several of these processor systems can be installed in the same crate for parallel processing, and the flexibility of the STAC also allows easy adaptation to other applications such as transient recording or phase-sensitive detection. (orig.)

  12. Proposal for the award of a blanket order contract for the supply of microprocessor-based protection and control devices for the CERN HV distribution network

    CERN Document Server

    2004-01-01

    This document concerns the award of a blanket contract for the supply of microprocessor-based protection and control devices for the CERN HV distribution network. The Finance Committee is invited to agree to the negotiation of a blanket order contract with SCHNEIDER ELECTRIC (PT), the lowest technically acceptable bidder after realignment, for the supply of microprocessor-based protection and control devices for the CERN HV distribution network for a total amount of 1 900 000 euros (2 924 128 Swiss francs), subject to revision for inflation after 1 January 2007. The rate of exchange used is that stipulated in the tender

  13. Microprocessors applications in the nuclear industry

    International Nuclear Information System (INIS)

    Ethridge, C.D.

    1980-01-01

    Microprocessors in the nuclear industry, particularly at the Los Alamos Scientific Laboratory, have been and are being utilized in a wide variety of applications ranging from data acquisition and control for basic physics research to monitoring special nuclear material in long-term storage. Microprocessor systems have been developed to support weapons diagnostics measurements during underground weapons testing at the Nevada Test Site. Multiple single-component microcomputers are now controlling the measurement and recording of nuclear reactor operating power levels. The CMOS microprocessor data-acquisition instrumentation has operated on balloon flights to monitor power plant emissions. Target chamber mirror-positioning equipment for laser fusion facilities employs microprocessors

  14. Development of a microprocessor-controlled coulometric system for stable ph control

    NARCIS (Netherlands)

    Bergveld, Piet; van der Schoot, B.H.

    1983-01-01

    The coulometric pH control system utilizes a programmable coulostat for controlling the pH of a certain volume of unbuffered solution. Based on theoretical considerations, conditions are established which guarantee stable operation with maximum suppression of disturbances from the dissolution of

  15. Automated microprocessor-controlled atomic absorption analysis of natural water for arsenic and selenium

    International Nuclear Information System (INIS)

    Morrow, R.W.; Futrell, T.L.; Adams, T.T.

    1978-08-01

    An automated, dual-channel atomic absorption spectrophotometer for the simultaneous determination of arsenic and selenium in natural water is now in operation. The instrument was constructed from commercially available optical components, spectral sources, and a sample changer. Automation was achieved by using an in-house-fabricated and programmed microprocessor. The instrument will analyze samples at a rate of 37 per hour, and a quantitative determination of arsenic and selenium to 0.2 μg/l (ppB) can be achieved. Arsenic can be determined with a precision of 19% at 1 μg/l and 6% at 10 μg/l, while selenium can be determined with a precision of 17% at 1 μg/l and 4% at 10 μg/l

  16. Microprocessor based systems for the higher technician

    CERN Document Server

    Vears, RE

    2013-01-01

    Microprocessor Based Systems for the Higher Technician provides coverage of the BTEC level 4 unit in Microprocessor Based Systems (syllabus U80/674). This book is composed of 10 chapters and concentrates on the development of 8-bit microcontrollers specifically constructed around the Z80 microprocessor. The design cycle for the development of such a microprocessor based system and the use of a disk-based development system (MDS) as an aid to design are both described in detail. The book deals with the Control Program Monitor (CP/M) operating system and gives background information on file hand

  17. Microprocessor-based integration of microfluidic control for the implementation of automated sensor monitoring and multithreaded optimization algorithms.

    Science.gov (United States)

    Ezra, Elishai; Maor, Idan; Bavli, Danny; Shalom, Itai; Levy, Gahl; Prill, Sebastian; Jaeger, Magnus S; Nahmias, Yaakov

    2015-08-01

    Microfluidic applications range from combinatorial synthesis to high throughput screening, with platforms integrating analog perfusion components, digitally controlled micro-valves and a range of sensors that demand a variety of communication protocols. Currently, discrete control units are used to regulate and monitor each component, resulting in scattered control interfaces that limit data integration and synchronization. Here, we present a microprocessor-based control unit, utilizing the MS Gadgeteer open framework that integrates all aspects of microfluidics through a high-current electronic circuit that supports and synchronizes digital and analog signals for perfusion components, pressure elements, and arbitrary sensor communication protocols using a plug-and-play interface. The control unit supports an integrated touch screen and TCP/IP interface that provides local and remote control of flow and data acquisition. To establish the ability of our control unit to integrate and synchronize complex microfluidic circuits we developed an equi-pressure combinatorial mixer. We demonstrate the generation of complex perfusion sequences, allowing the automated sampling, washing, and calibrating of an electrochemical lactate sensor continuously monitoring hepatocyte viability following exposure to the pesticide rotenone. Importantly, integration of an optical sensor allowed us to implement automated optimization protocols that require different computational challenges including: prioritized data structures in a genetic algorithm, distributed computational efforts in multiple-hill climbing searches and real-time realization of probabilistic models in simulated annealing. Our system offers a comprehensive solution for establishing optimization protocols and perfusion sequences in complex microfluidic circuits.

  18. Fuzzy Control Teaching Models

    Directory of Open Access Journals (Sweden)

    Klaus-Dietrich Kramer

    2016-05-01

    Full Text Available Many degree courses at technical universities include the subject of control systems engineering. As an addition to conventional approaches Fuzzy Control can be used to easily find control solutions for systems, even if they include nonlinearities. To support further educational training, models which represent a technical system to be controlled are required. These models have to represent the system in a transparent and easy cognizable manner. Furthermore, a programming tool is required that supports an easy Fuzzy Control development process, including the option to verify the results and tune the system behavior. In order to support the development process a graphical user interface is needed to display the fuzzy terms under real time conditions, especially with a debug system and trace functionality. The experiences with such a programming tool, the Fuzzy Control Design Tool (FHFCE Tool, and four fuzzy teaching models will be presented in this paper. The methodical and didactical objective in the utilization of these teaching models is to develop solution strategies using Computational Intelligence (CI applications for Fuzzy Controllers in order to analyze different algorithms of inference or defuzzyfication and to verify and tune those systems efficiently.

  19. Microprocessor multi-task monitor

    International Nuclear Information System (INIS)

    Ludemann, C.A.

    1983-01-01

    This paper describes a multi-task monitor program for microprocessors. Although written for the Intel 8085, it incorporates features that would be beneficial for implementation in other microprocessors used in controlling and monitoring experiments and accelerators. The monitor places permanent programs (tasks) arbitrarily located throughout ROM in a priority ordered queue. The programmer is provided with the flexibility to add new tasks or modified versions of existing tasks, without having to comply with previously defined task boundaries or having to reprogram all of ROM. Scheduling of tasks is triggered by timers, outside stimuli (interrupts), or inter-task communications. Context switching time is of the order of tenths of a milllisecond

  20. Increased control and data acquisition capabilities via microprocessor-based timed reading and time plot CAMAC modules

    International Nuclear Information System (INIS)

    Barsotti, E.J.; Purvis, D.M.; Loveless, R.L.; Hance, R.D.

    1977-01-01

    By implementing a microprocessor-based CAMAC module capable of being programmed to function as a time plot or a timed reading controller, the capabilities of the experimental area serial CAMAC control and data acquisition system at Fermilab have been extensively increased. These modules provide real-time data gathering and pre-processing functions synchronized to the main accelerator cycle clock while adding only a minimal amount to the host computer's CPU time and memory requirements. Critical data requiring a fast system response can be read by the host computer immediately following the request for this data. The vast majority of data, being non-critical, can be read via a block transfer during a non-busy time in the main accelerator cycle. Each of Fermilab's experimental areas, Meson, Neutrino and Proton, are controlled primarily by a Lockheed MAC-16 computer. Each of these three minicomputers is linked to a larger Digital Equipment Corporation PDP-11/50 computer. The PDP-11 computers are used primarily for data analysis and reduction. Presently two PDP-11's are linked to the three MAC-16 computers

  1. Microprocessor-controlled vs. "dump-freezing" platelet and lymphocyte cryopreservation: A quantitative and qualitative comparative study

    Directory of Open Access Journals (Sweden)

    Balint Bela

    2006-01-01

    Full Text Available Background/Aim. Thermodynamical and cryobiological parameters responsible for cell damages during cryopreservation (cryoinjuries have not yet been completely explained. Thus, freezing procedures should be revised, exactly optimized to obtain an enhanced structural and functional recovery of frozen- thawed cells. The aim of this study was to compare microprocessor- controlled (controlled-rate with the compensation of the released fusion heat and “dump-freezing” (uncontrolled- rate of the platelet and lymphocyte cryopreservation efficacy. Methods. Platelet quantitative recovery (post-thaw vs. unfrozen cell count, viability (using hypotonic shock response - HSR, morphological score (PMS, ultrastructural (electron microscopy properties and expression of different surface antigens were investigated. In lymphocyte setting, cell recovery and viability (using trypan blue exclusion test as well as functionality (by plant mitogens were determined. Controlled- rate freezing and uncontrolled-rate cryopreservation were combined with 6% (platelets and 10% (lymphocytes dimethyl sulfoxide (DMSO. Results. Platelet recovery and functionality were superior in the controlled-rate system. The majority of surface antigen expression was reduced in both freezing groups vs. unfrozen cells, but GP140/CD62p was significantly higher in controlled-rate vs. uncontrolled-rate setting. Controlled- rate freezing resulted with better lymphocyte recovery and viability (trypan blue-negative cell percentage. In mitogen-induced lymphocyte proliferative response no significant intergroup difference (controlled-rate vs. uncontrolled-rate were found. Conclusion. The data obtained in this study showned the dependence of cell response on the cryopreservation type. Controlled-rate freezing provided a superior platelet quantitative and functional recovery. Lymphocyte recovery and viability were better in the controlled-rate group, although only a minor intergroup difference for cell

  2. Newnes microprocessor pocket book

    CERN Document Server

    Money, Steve

    2014-01-01

    Newnes Microprocessor Pocket Book explains the basic hardware operation of a microprocessor and describes the actions of the various types of instruction that can be executed. A summary of the characteristics of many of the popular microprocessors is presented. Apart from the popular 8- and 16-bit microprocessors, some details are also given of the popular single chip microcomputers and of the reduced instruction set computer (RISC) type processors such as the Transputer, Novix FORTH processor, and Acorn ARM processor.Comprised of 15 chapters, this book discusses the principles involved in bot

  3. Microprocessor-controlled system for automatic acquisition of potentiometric data and their non-linear least-squares fit in equilibrium studies.

    Science.gov (United States)

    Gampp, H; Maeder, M; Zuberbühler, A D; Kaden, T A

    1980-06-01

    A microprocessor-controlled potentiometric titration apparatus for equilibrium studies is described. The microprocessor controls the stepwise addition of reagent, monitors the pH until it becomes constant and stores the constant value. The data are recorded on magnetic tape by a cassette recorder with an RS232 input-output interface. A non-linear least-squares program based on Marquardt's modification of the Newton-Gauss method is discussed and its performance in the calculation of equilibrium constants is exemplified. An HP 9821 desk-top computer accepts the data from the magnetic tape recorder. In addition to a fully automatic fitting procedure, the program allows manual adjustment of the parameters. Three examples are discussed with regard to performance and reproducibility.

  4. Graphical User Interface and Microprocessor Control Enhancement of a Pseudorandom Code Generator

    National Research Council Canada - National Science Library

    Kos, John

    1999-01-01

    .... This thesis addresses the issue of providing automated computer control to previously built, manually controlled hardware incorporating the Stanford Telecom STEL-1032 Pseudo-Random Number (PRN) Coder...

  5. Memory, microprocessor, and ASIC

    CERN Document Server

    Chen, Wai-Kai

    2003-01-01

    System Timing. ROM/PROM/EPROM. SRAM. Embedded Memory. Flash Memories. Dynamic Random Access Memory. Low-Power Memory Circuits. Timing and Signal Integrity Analysis. Microprocessor Design Verification. Microprocessor Layout Method. Architecture. ASIC Design. Logic Synthesis for Field Programmable Gate Array (EPGA) Technology. Testability Concepts and DFT. ATPG and BIST. CAD Tools for BIST/DFT and Delay Faults.

  6. OS Friendly Microprocessor Architecture

    Science.gov (United States)

    2017-04-01

    NOTES Patrick La Fratta is now affiliated with Micron Technology, Inc., Boise, Idaho. 14. ABSTRACT We present an introduction to the patented ...Operating System Friendly Microprocessor Architecture (OSFA). The software framework to support the hardware-level security features is currently patent ...Army is assignee. OS Friendly Microprocessor Architecture. United States Patent 9122610. 2015 Sep. 2. Jungwirth P, inventor; US Army is assignee

  7. a microprocessor-based control, scheme for a pwm voltage-fed

    African Journals Online (AJOL)

    Dr Obe

    power circuit over-current and over-voltage protection against adverse changes in the inverter input supply and the ... integral controllers constitute the main control program while the application of thyristor gating ... current flow to the load.

  8. Simple Digital Control of a Two-Stage PFC Converter Using DSPIC30F Microprocessor

    DEFF Research Database (Denmark)

    Török, Lajos; Munk-Nielsen, Stig

    2010-01-01

    The use of dsPIC digital signal controllers (DSC) in Switch Mode Power Supply (SMPS) applications opens new perspectives for cheap and flexible digital control solutions. This paper presents the digital control of a two stage power factor corrector (PFC) converter. The PFC circuit is designed...... and built for 70W rated output power. Average current mode control for boost converter and current programmed control for forward converter are implemented on a dsPIC30F1010. Pulse Width Modulation (PWM) technique is used to drive the switching MOSFETs. Results show that digital solutions with ds...

  9. Mold heating and cooling microprocessor conversion

    Science.gov (United States)

    Hoffman, D. P.

    1995-07-01

    Conversion of the microprocessors and software for the Mold Heating and Cooling (MHAC) pump package control systems was initiated to allow required system enhancements and provide data communications capabilities with the Plastics Information and Control System (PICS). The existing microprocessor-based control systems for the pump packages use an Intel 8088-based microprocessor board with a maximum of 64 Kbytes of program memory. The requirements for the system conversion were developed, and hardware has been selected to allow maximum reuse of existing hardware and software while providing the required additional capabilities and capacity. The new hardware will incorporate an Intel 80286-based microprocessor board with an 80287 math coprocessor, the system includes additional memory, I/O, and RS232 communication ports.

  10. Microprocessor controlled system for automatic and semi-automatic syntheses of radiopharmaceuticals

    International Nuclear Information System (INIS)

    Ruth, T.J.; Adam, M.J.; Morris, D.; Jivan, S.

    1986-01-01

    A computer based system has been constructed to control the automatic synthesis of 2-deoxy-2-( 18 F)fluoro-D-glucose and is also being used in the development of an automatic synthesis of L-6-( 18 F)fluorodopa. (author)

  11. One-Chip Solution to Intelligent Robot Control: Implementing Hexapod Subsumption Architecture Using a Contemporary Microprocessor

    Directory of Open Access Journals (Sweden)

    Nikita Pashenkov

    2008-11-01

    Full Text Available This paper introduces a six-legged autonomous robot managed by a single controller and a software core modeled on subsumption architecture. We begin by discussing the features and capabilities of IsoPod, a new processor for robotics which has enabled a streamlined implementation of our project. We argue that this processor offers a unique set of hardware and software features, making it a practical development platform for robotics in general and for subsumption-based control architectures in particular. Next, we summarize original ideas on subsumption architecture implementation for a six-legged robot, as presented by its inventor Rodney Brooks in 1980's. A comparison is then made to a more recent example of a hexapod control architecture based on subsumption. The merits of both systems are analyzed and a new subsumption architecture layout is formulated as a response. We conclude with some remarks regarding the development of this project as a hint at new potentials for intelligent robot design, opened up by a recent development in embedded controller market.

  12. CAMAC based computer--computer communications via microprocessor data links

    International Nuclear Information System (INIS)

    Potter, J.M.; Machen, D.R.; Naivar, F.J.; Elkins, E.P.; Simmonds, D.D.

    1976-01-01

    Communications between the central control computer and remote, satellite data acquisition/control stations at The Clinton P. Anderson Meson Physics Facility (LAMPF) is presently accomplished through the use of CAMAC based Data Link Modules. With the advent of the microprocessor, a new philosophy for digital data communications has evolved. Data Link modules containing microprocessor controllers provide link management and communication network protocol through algorithms executed in the Data Link microprocessor

  13. Operating experience with a new accelerator control system based upon microprocessors

    Energy Technology Data Exchange (ETDEWEB)

    Magyary, S.; Lancaster, H.; Selph, F.; Fahmie, M.; Timossi, C.; Glatz, J.; Ritchie, A.; Hinkson, J.; Benjegerdes, R.; Brodzik, D.

    1981-03-01

    This paper describes the design and operating experience with a high performance control system tailored to the requirements of the SuperHILAC accelerator. A large number (20) of the latest 16-bit microcomputer boards are used in a parallel-distributed manner to get a high system bandwidth. Because of the high bandwidth, software costs and complexity are significantly reduced. The system by its very nature and design is easily upgraded and repaired. Dynamically assigned and labeled knobs, together with touch-panels, allow a flexible and efficient operator interface. An X-Y vector graphics system provides for display and labeling of real-time signals as well as general plotting functions. This control system allows attachment of a powerful auxiliary computer for scientific processing with access to accelerator parameters.

  14. Microprocessor- and LSI-based CAMAC RAM controllers in a modular multiparameter instrumentation system

    International Nuclear Information System (INIS)

    Skarda, V.

    1982-01-01

    This contribution deals with the main features and with the hardware modifications of RAM controllers in the dual-port accessed CAMAC memory modules that have been applied in a modular multichannel analyzer instrumentation system. The modules described in this paper are fully compatible with the CAMAC standard EUR 4100 and with the COMPEX draft proposal of the ESONE Study Group, as well. Special attention is paid to the possible application of modern LSI bipolar circuits. (orig.)

  15. Microprocessor supervised stability control system for the united power system of Middle Volga in fault conditions

    Energy Technology Data Exchange (ETDEWEB)

    Berdnikov, V I; Birgel, E R; Kovalev, V D; Kuznestov, A N

    1994-12-31

    The development of the 500 kV UPS of Middle Volga, the complication of its configuration and operating conditions particularly in connection with concentration of the generating power at Balakovo NPS have aggravated the problem of stability of the Middle Volga UPS when high power is transmitted along the 500 kV transient system. In this case the necessity for improving control actions` dosage accuracy has also appeared. This work discusses solution to the above mentioned issue. (author) 3 figs.

  16. Independent programmable CAMAC crate controller based on KR580IK80A microprocessor

    International Nuclear Information System (INIS)

    Kulik, O.V.; Andronov, M.A.

    1986-01-01

    The RTKAM-2 independent programmable CAMAC crate controller is designed for use as a remote terminal in systems for automation of physics research. The built-in 12K-byte RAM is automatically changed to 24-bit organization in exchanges with the crate dataway. A nonstandard 24-level priority-interrupt system allows an LAM-request routing to be accessed in 5.5 μsec. Communication with the base computer is through a two conductor line

  17. Secure Microprocessor-Controlled Prosthetic Leg for Elderly Amputees: Preliminary Results

    Directory of Open Access Journals (Sweden)

    S. Krut

    2011-01-01

    Full Text Available We introduce a new prosthetic leg design, adapted to elderly trans-femoral amputees. Technical progress in prosthesis design mainly concerns active individuals. An important number of elderly amputees are not very mobile, tire easily, present reduced muscle strength, and have difficulties managing their balance. Therefore, the needs and characteristics of this specific population are very different from those of younger ones and the prosthetic solutions are not adapted. Our artificial knee has been designed to fulfill the specific requirements of this population in terms of capabilities, transfer assistance, security, intuitiveness, simplicity of use, and types of physical activity to be performed. We particularly focused our efforts on ensuring safe and secure stand-to-sit transfers. We developed an approach to control the different states of the prosthetic joint (blocked, free, resistant, associated with different physical activities. Amputee posture and motion are observed through a single multi-axis force sensor embedded in the prosthesis. The patient behaves naturally, while the controller analyses his movements in order to detect his intention to sit down. The detection algorithm is based on a reference pattern, calibrated individually, to which the sensor data are compared, and submitted to a set of tests allowing the discrimination of the intention to sit down from other activities. Preliminary validation of the system has been performed in order to verify the applicability of the prosthesis to different tasks: walking, standing, sitting down, standing up, picking up an object from a chair, slope and stair climbing.

  18. A microfluidic microprocessor: controlling biomimetic containers and cells using hybrid integrated circuit/microfluidic chips.

    Science.gov (United States)

    Issadore, David; Franke, Thomas; Brown, Keith A; Westervelt, Robert M

    2010-11-07

    We present an integrated platform for performing biological and chemical experiments on a chip based on standard CMOS technology. We have developed a hybrid integrated circuit (IC)/microfluidic chip that can simultaneously control thousands of living cells and pL volumes of fluid, enabling a wide variety of chemical and biological tasks. Taking inspiration from cellular biology, phospholipid bilayer vesicles are used as robust picolitre containers for reagents on the chip. The hybrid chip can be programmed to trap, move, and porate individual living cells and vesicles and fuse and deform vesicles using electric fields. The IC spatially patterns electric fields in a microfluidic chamber using 128 × 256 (32,768) 11 × 11 μm(2) metal pixels, each of which can be individually driven with a radio frequency (RF) voltage. The chip's basic functions can be combined in series to perform complex biological and chemical tasks and can be performed in parallel on the chip's many pixels for high-throughput operations. The hybrid chip operates in two distinct modes, defined by the frequency of the RF voltage applied to the pixels: Voltages at MHz frequencies are used to trap, move, and deform objects using dielectrophoresis and voltages at frequencies below 1 kHz are used for electroporation and electrofusion. This work represents an important step towards miniaturizing the complex chemical and biological experiments used for diagnostics and research onto automated and inexpensive chips.

  19. Multi-core Microprocessors

    Indian Academy of Sciences (India)

    Based on empirical data, Gordon Moore .... there are numerous models of the same Intel microprocessor such as Pentium. 3). ... returns. The limit on instruction and thread-level processing coupled with ..... This style of parallel programming is.

  20. SNOOP module CAMAC interface to the 168/E microprocessor

    International Nuclear Information System (INIS)

    Bernstein, D.; Carroll, J.T.; Mitnick, V.H.; Paffrath, L.; Parker, D.B.

    1979-10-01

    A pair of 168/E microprocessors will be used to meet the realtime computing requirements of the SLAC Hybrid Facility. A SNOOP module and 168/E Interface provide the link between the host computer and the microprocessors. By eavesdropping on normal CAMAC read operations, the SNOOP provides a direct data transfer from CAMAC to microprocessor memory. The host computer controls the processors using standard CAMAC programmed I/O to the SNOOP

  1. Microprocessor monitored Auger spectrometer

    International Nuclear Information System (INIS)

    Sapin, Michel; Ghaleb, Dominique; Pernot, Bernard.

    1982-05-01

    The operation of an Auger spectrometer, used for studying surface impurity diffusion, has been fully automatized with the help of a microprocessor. The characteristics, performance and practical use of the system are described together with the main advantage for the experimentator [fr

  2. Development of microprocessor based ionization gauge controller for variable energy cyclotron project [Paper No.:P5

    International Nuclear Information System (INIS)

    Srilakshmi, B.R.; Rao, M.K.V.

    1993-01-01

    The ion gauge uses energetic electrons to ionize gas molecules, the magnitude of ion current thus produced is a measure of the molecular density or the pressure which is the most commonly measured parameter in vacuum technology. The relationship between ion current (I p ) and pressure (P) is given by the equation P=I p /(I E .S.G) where S = sensitivity of a particular gauge head, G = gas constant depending on the nature of the gas appearing in the system. I E = emission current. Hence P becomes directly proportional to I p if I E is maintained constant. The present scheme incorporates a microprocessor based circuit for automatic display of pressure in the mantissa and exponent form. While the exponent is displayed through a look up table stored in the EPROM, the mantissa is computed by the processor after multiple sampling, conversion through ADC and averaging technique. (author). 2 refs., 1 fig

  3. CFD-simulation of radiator for air cooling of microprocessors in a limitided space

    OpenAIRE

    Trofimov V. E.; Pavlov A. L.; Mokrousova E. A.

    2016-01-01

    One of the final stages of microprocessors development is heat test. This procedure is performed on a special stand, the main element of which is the switching PCB with one or more mounted microprocessor sockets, chipsets, interfaces, jumpers and other components which provide various modes of microprocessor operation. The temperature of microprocessor housing is typically changed using thermoelectric module. The cold surface of the module with controlled temperature is in direct thermal c...

  4. Design of microprocessor-based hardware for number theoretic transform implementation

    Energy Technology Data Exchange (ETDEWEB)

    Anwar Ahmed Shamim

    1985-01-01

    The Winograd (1976) Fourier Transform algorithm (WFTA) was implemented on a TMS9900 microprocessor to compute NTTs. Since multiplication conducted modulo m is very time consuming a special purpose external hardware modular multiplier was designed, constructed and interfaced with the TMS9900 microprocessor. This external hardware modular multiplier allowed an improvement in the transform execution time. Computation time may further be reduced by employing several microprocessors. Taking advantage of the inherent parallelism of the WFTA, a dedicated parallel microprocessor system was designed and constructed to implement a 15-point WFTA in parallel. Benchmark programs were written to choose a suitable microprocessor for the parallel microprocessor system. A master or a host microprocessor is used to control the parallel microprocessor system and provides an interface to the outside world. An analogue to digital (a/d) and a digital to analogue (d/a) converter allows real time digital signal processing.

  5. The European Logarithmic Microprocessor

    Czech Academy of Sciences Publication Activity Database

    Coleman, J. N.; Softley, C. I.; Kadlec, Jiří; Matoušek, R.; Tichý, Milan; Pohl, Zdeněk; Heřmánek, Antonín; Benschop, N. F.

    2008-01-01

    Roč. 57, č. 4 (2008), s. 532-546 ISSN 0018-9340 Grant - others:Evropská komise(BE) ESPRIT 33544 Institutional research plan: CEZ:AV0Z10750506 Source of funding: R - rámcový projekt EK Keywords : Processor architecture * arithmetic unit * logarithmic arithmetic Subject RIV: JC - Computer Hardware ; Software Impact factor: 2.611, year: 2008 http://library.utia.cas.cz/separaty/2008/ZS/kadlec-the%20european%20logarithmic%20microprocessor.pdf

  6. TRIESTE: College on Microprocessors

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The International Centre for Theoretical Physics, set up at Trieste in 1964, has as its major task the provision of a stimulating intellectual environment for physicists from developing countries. This goal is furthered by a varied programme of courses for visiting scientists. Not all the courses remain in the rarefied atmosphere of theory and in September a very successful 'College on Microprocessors: Technology and Applications in Physics' was held. It was a prime example of the efforts being made to spread important modern technology into the developing countries

  7. Hardware math for the 6502 microprocessor

    Science.gov (United States)

    Kissel, R.; Currie, J.

    1985-01-01

    A floating-point arithmetic unit is described which is being used in the Ground Facility of Large Space Structures Control Verification (GF/LSSCV). The experiment uses two complete inertial measurement units and a set of three gimbal torquers in a closed loop to control the structural vibrations in a flexible test article (beam). A 6502 (8-bit) microprocessor controls four AMD 9511A floating-point arithmetic units to do all the computation in 20 milliseconds.

  8. A microprocessor based picture analysis system for automatic track measurements

    International Nuclear Information System (INIS)

    Heinrich, W.; Trakowski, W.; Beer, J.; Schucht, R.

    1982-01-01

    In the last few years picture analysis became a powerful technique for measurements of nuclear tracks in plastic detectors. For this purpose rather expensive commercial systems are available. Two inexpensive microprocessor based systems with different resolution were developed. The video pictures of particles seen through a microscope are digitized in real time and the picture analysis is done by software. The microscopes are equipped with stages driven by stepping motors, which are controlled by separate microprocessors. A PDP 11/03 supervises the operation of all microprocessors and stores the measured data on its mass storage devices. (author)

  9. Satisfying STEM Education Using the Arduino Microprocessor in C Programming

    Science.gov (United States)

    Hoffer, Brandyn M.

    There exists a need to promote better Science Technology Engineering and Math (STEM) education at the high school level. To satisfy this need a series of hands-on laboratory assignments were created to be accompanied by 2 educational trainers that contain various electronic components. This project provides an interdisciplinary, hands-on approach to teaching C programming that meets several standards defined by the Tennessee Board of Education. Together the trainers and lab assignments also introduce key concepts in math and science while allowing students hands-on experience with various electronic components. This will allow students to mimic real world applications of using the C programming language while exposing them to technology not currently introduced in many high school classrooms. The developed project is targeted at high school students performing at or above the junior level and uses the Arduino Mega open-source Microprocessor and software as the primary control unit.

  10. Microprocessor-based stepping motor driver

    International Nuclear Information System (INIS)

    Halbig, J.K.; Klosterbuer, S.F.

    1979-09-01

    The Pion Generation for Medical Irradiations (PIGMI) program at the Los Alamos Scientific Laboratory requires a versatile stepping motor driver to do beam diagnostic measurements. A driver controlled by a microprocessor that can move eight stepping motors simultaneously was designed. The driver can monitor and respond to clockwise- and counterclockwise-limit switches, and it can monitor a 0- to 10-V dc position signal. The software controls start and stop ramping and maximum stepping rates. 2 figures, 1 table

  11. A functional comparison of conventional knee-ankle-foot orthoses and a microprocessor-controlled leg orthosis system based on biomechanical parameters.

    Science.gov (United States)

    Schmalz, Thomas; Pröbsting, Eva; Auberger, Roland; Siewert, Gordon

    2016-04-01

    The microprocessor-controlled leg orthosis C-Brace enables patients with paretic or paralysed lower limb muscles to use dampened knee flexion under weight-bearing and speed-adapted control of the swing phase. The objective of the present study was to investigate the new technical functions of the C-Brace orthosis, based on biomechanical parameters. The study enrolled six patients. The C-Brace orthosis is compared with conventional leg orthoses (four stance control orthoses, two locked knee-ankle-foot orthoses) using biomechanical parameters of level walking, descending ramps and descending stairs. Ground reaction forces, joint moments and kinematic parameters were measured for level walking as well as ascending and descending ramps and stairs. With the C-Brace, a nearly natural stance phase knee flexion was measured during level walking (mean value 11° ± 5.6°). The maximum swing phase knee flexion angle of the C-Brace approached the normal value of 65° more closely than the stance control orthoses (66° ± 8.5° vs 74° ± 6.4°). No significant differences in the joint moments were found between the C-Brace and stance control orthosis conditions. In contrast to the conventional orthoses, all patients were able to ambulate ramps and stairs using a step-over-step technique with C-Brace (flexion angle 64.6° ± 8.2° and 70.5° ± 12.4°). The results show that the functions of the C-Brace for situation-dependent knee flexion under weight bearing have been used by patients with a high level of confidence. The functional benefits of the C-Brace in comparison with the conventional orthotic mechanisms could be demonstrated most clearly for descending ramps and stairs. The C-Brace orthosis is able to combine improved orthotic function with sustained orthotic safety. © The International Society for Prosthetics and Orthotics 2014.

  12. Multiple microprocessor based nuclear reactor power monitor

    International Nuclear Information System (INIS)

    Lewis, P.S.; Ethridge, C.D.

    1979-01-01

    The reactor power monitor is a portable multiple-microprocessor controlled data acquisition device being built for the International Atomic Energy Association. Its function is to measure and record the hourly integrated operating thermal power level of a nuclear reactor for the purpose of detecting unannounced plutonium production. The monitor consists of a 3 He proportional neutron detector, a write-only cassette tape drive and control electronics based on two INTEL 8748 microprocessors. The reactor power monitor operates from house power supplied by the plant operator, but has eight hours of battery backup to cover power interruptions. Both the hourly power levels and any line power interruptions are recorded on tape and in memory. Intermediate dumps from the memory to a data terminal or strip chart recorder can be performed without interrupting data collection

  13. The specifications a multichannel analyser using microprocessor

    International Nuclear Information System (INIS)

    Pontes, E.W.

    The idea of a small nuclear data acquisition system (stand - alone CAMAC system) used for spectroscopy, is presented. The system is composed by an autonomous controller with microprocessor with one fast programable unit (1-2 μsec/CAMAC instructions) and with modulus of general functions as: CAMAC memory, interface for video, interface for analogy to digital converter and temporizing. (E.G.) [pt

  14. Microprocessors in automatic chemical analysis

    International Nuclear Information System (INIS)

    Goujon de Beauvivier, M.; Perez, J.-J.

    1979-01-01

    Application of microprocessors to programming and computing of solutions chemical analysis by a sequential technique is examined. Safety, performances reliability are compared to other methods. An example is given on uranium titration by spectrophotometry [fr

  15. Microprocessor based techniques at CESR

    International Nuclear Information System (INIS)

    Giannini, G.; Cornell Univ., Ithaca, NY

    1981-01-01

    Microprocessor based systems succesfully used in connection with the High Energy Physics experimental program at the Cornell Electron Storage Ring are described. The multiprocessor calibration system for the CUSB calorimeter is analyzed in view of present and future applications. (orig.)

  16. Multi-microprocessor control of the main ring magnet power supply of the 12 GeV KEK proton synchrotron

    International Nuclear Information System (INIS)

    Sueno, T.; Mikawa, K.; Toda, M.; Toyama, T.; Sato, H.; Matsumoto, S.

    1992-01-01

    A general description of the computer control system of the KEK 12 GeV PS main ring magnet power supply is given, including its peripheral devices. The system consists of the main HIDIC-V90/25 CPU and of the input and output controllers HISEC-04M. The main CPU, supervised by UNIX, provides the man-machine interfacing and implements the repetitive control algorithm to correct for any magnet current deviation from reference. Two sub-CPU's are linked by a LAN and supported by a real time multi-task monitor. The output process controller distributes the control patterns to 16-bit DAC's, at 1.67 ms clock period in synchronism with the 3-phase ac line systems. The input controller logs the magnet current and voltage, via 16-bit ADC's at the same clock rate. (author)

  17. A realtime feedback microprocessor for the TEVATRON

    International Nuclear Information System (INIS)

    Herrup, D.A.; Chapman, L.; Franck, A.; Groves, T.; Lublinsky, B.

    1993-01-01

    A feedback microprocessor has been built for the TEVATRON. Its inputs are realtime accelerator measurements, data describing the state of the TEVATRON, and ramp tables. The microprocessor includes a finite state machine. Each state corresponds to a specific TEVATRON operation. Transitions between states are initiated by the global TEVATRON clock. Each state includes a cyclic routine which is called periodically and where all calculations are performed. The output corrections are inserted onto a fast TEVATRON-wide link from which the power supplies will read the realtime correction. The authors also store all of the input data and output corrections in a set of buffers which can easily be retrieved for diagnostic analysis. This talk will describe use of this device to control the TEVATRON tunes and discuss other uses

  18. A feedback microprocessor for hadron colliders

    International Nuclear Information System (INIS)

    Herrup, D.A.; Chapman, L.; Franck, A.; Groves, T.; Lublinsky, B.

    1992-12-01

    A feedback microprocessor has been built for the TEVATRON. It has been constructed to be applicable to hadron colliders in general. Its inputs are realtime accelerator measurements, data describing the state of the TEVATRON, and ramp tables. The microprocessor software includes a finite state machine. Each state corresponds to a specific TEVATRON operation and has a state-specific TEVATRON model. Transitions between states are initiated by the global TEVATRON clock. Each state includes a cyclic routine which is called periodically and where all calculations are performed. The output corrections are inserted onto a fast TEVATRON-wide link from which the power supplies will read the realtime corrections. We also store all of the input data and output corrections in a set of buffers which can easily be retrieved for diagnostic analysis. In this paper we will describe this device and its use to control the TEVATRON tunes as well as other possible applications

  19. Microprocessors in detectors and analysis

    International Nuclear Information System (INIS)

    Siskind, E.J.

    1982-01-01

    The increasing need in high energy physics experiments for computation power for both online and offline applications, coupled with the current microprocessor revolution, has led to the examination of the use of microprocessors in various aspects of HEP computing. A brief (and admittedly somewhat biased) review is given of current hardware products, the costs of developing and producing hardware systems, and the costs of providing appropriate software support tools which allow one to make effective use of physicists' time, and the applicability of certain systems to the various needs of HEP computing

  20. Microprocessors in detectors and analysis

    International Nuclear Information System (INIS)

    Siskind, E.J.

    1982-01-01

    The increasing need in high energy physics experiments for computation power for both online and offline applications, coupled with the current microprocessor revolution, has led us to examine the use of microprocessors in various aspects of HEP computing. The following article is a brief (and admittedly somewhat biased) review of current hardware products, the costs of developing and producing hardware systems, and the costs of providing appropriate software support tools which allow one to make effective use of physicists' time, and the applicability of certain systems to the various needs of HEP computing

  1. Teaching with Rosy

    CERN Multimedia

    1981-01-01

    The 'Rosy' system was developed at CERN around 1981 mainly as a teaching tool to educate engineers and technicians to the usage of microprocessors, which were then just appearing on the market. The system was roughly as powerful as an early AppleII computer, but it had a set of open interfaces to provide read-out and control of physics experiments. About 100 boxes were produced, and used also outside CERN.

  2. Microprocessor system to recover data from a self-scanning photodiode array

    International Nuclear Information System (INIS)

    Koppel, L.N.; Gadd, T.J.

    1975-01-01

    A microprocessor system developed at Lawrence Livermore Laboratory has expedited the recovery of data describing the low energy x-ray spectra radiated by laser-fusion targets. An Intel microprocessor controls the digitization and scanning of the data stream of an x-ray-sensitive self-scanning photodiode array incorporated in a crystal diffraction spectrometer

  3. High-speed multiple-channel analog to digital data-acquisition module for microprocessor systems

    International Nuclear Information System (INIS)

    Ethridge, C.D.

    1977-01-01

    Intelligent data acquisition and instrumentation systems established by the incorporation of microprocessor technology require high-speed analog to digital conversion of multiple-channel input signals. Sophisticated data systems or subsystems are enabled by the microprocessor software flexibility to establish adaptive input data procedures. These adaptive procedures are enhanced by versatile interface circuitry which is software controlled

  4. Integration in a nuclear physics experiment of a visualization unit managed by a microprocessor

    International Nuclear Information System (INIS)

    Lefebvre, M.

    1976-01-01

    A microprocessor (Intel 8080) is introduced in the equipment controlling the (e,e'p) experiment that will take place at the linear accelerator operating in the premises of CEA (Orme des Merisiers, Gif-sur-Yvette, France). The purpose of the microprocessor is to handle the visualization tasks that are necessary to have a continuous control of the experiment. By doing so more time and more memory will be left for data processing by the calculator unit. In a forward version of the system, the controlling of the level of helium in the target might also be in charge of the microprocessor. This work is divided into 7 main parts: 1) a presentation of the linear accelerator and its experimental facilities, 2) the Intel 8080 micro-processor and its programming, 3) the implementation of the micro-processor in the electronic system, 4) the management of the memory, 5) data acquisition, 6) the keyboard, and 7) the visualization unit [fr

  5. Teaching lasers to control molecules

    International Nuclear Information System (INIS)

    Judson, R.S.; Rabitz, H.

    1992-01-01

    We simulate a method to teach a laser pulse sequences to excite specified molecular states. We use a learning procedure to direct the production of pulses based on ''fitness'' information provided by a laboratory measurement device. Over a series of pulses the algorithm learns an optimal sequence. The experimental apparatus, which consists of a laser, a sample of molecules and a measurement device, acts as an analog computer that solves Schroedinger's equation n/Iexactly, in real time. We simulate an apparatus that learns to excite specified rotational states in a diatomic molecule

  6. Design and implementation of a microprocessor based room ...

    African Journals Online (AJOL)

    This paper describes the development of a microprocessor based room illumination control system that offers advantage of improved efficiency in the use of electrical energy and reduced cost of electricity over manually controlled lighting systems. This system is developed to regulate the intensity of light from direct current ...

  7. Microprocessor-based data acquisition systems for Hera experiments

    International Nuclear Information System (INIS)

    Haynes, W.J.

    1989-09-01

    Sophisticated multi-microprocessor configurations are envisaged to cope with the technical challenges of the HERA electron-proton collider and the high data rates from the two large experiments H1 and ZEUS. These lecture notes concentrate on many of the techniques employed, with much emphasis being placed on the use of the IEEE standard VMEbus as a unifying element. The role of modern 32-bit CISC and RISC microprocessors, in the handling of data and the filtering of physics information, is highlighted together with the integration of personal computer stations for monitoring and control. (author)

  8. Technology transfer of military space microprocessor developments

    Science.gov (United States)

    Gorden, C.; King, D.; Byington, L.; Lanza, D.

    1999-01-01

    Over the past 13 years the Air Force Research Laboratory (AFRL) has led the development of microprocessors and computers for USAF space and strategic missile applications. As a result of these Air Force development programs, advanced computer technology is available for use by civil and commercial space customers as well. The Generic VHSIC Spaceborne Computer (GVSC) program began in 1985 at AFRL to fulfill a deficiency in the availability of space-qualified data and control processors. GVSC developed a radiation hardened multi-chip version of the 16-bit, Mil-Std 1750A microprocessor. The follow-on to GVSC, the Advanced Spaceborne Computer Module (ASCM) program, was initiated by AFRL to establish two industrial sources for complete, radiation-hardened 16-bit and 32-bit computers and microelectronic components. Development of the Control Processor Module (CPM), the first of two ASCM contract phases, concluded in 1994 with the availability of two sources for space-qualified, 16-bit Mil-Std-1750A computers, cards, multi-chip modules, and integrated circuits. The second phase of the program, the Advanced Technology Insertion Module (ATIM), was completed in December 1997. ATIM developed two single board computers based on 32-bit reduced instruction set computer (RISC) processors. GVSC, CPM, and ATIM technologies are flying or baselined into the majority of today's DoD, NASA, and commercial satellite systems.

  9. Multichannel analyzer based on microprocessors

    International Nuclear Information System (INIS)

    Soares, M.

    1983-06-01

    A multichannel analyser for nuclear spectrometry, that would attend the needs of research laboratories and could be industrialized in Brazil, was developed. The design was based on INTEL 8080/85 microprocessors; other processors were also used to implement specific functions, such as shared busbar using direct memory access. A prototype was developed and tested through simulation, using a nuclear spectrometry chain. The results were fully satisfactory. (Author) [pt

  10. Small Microprocessor for ASIC or FPGA Implementation

    Science.gov (United States)

    Kleyner, Igor; Katz, Richard; Blair-Smith, Hugh

    2011-01-01

    A small microprocessor, suitable for use in applications in which high reliability is required, was designed to be implemented in either an application-specific integrated circuit (ASIC) or a field-programmable gate array (FPGA). The design is based on commercial microprocessor architecture, making it possible to use available software development tools and thereby to implement the microprocessor at relatively low cost. The design features enhancements, including trapping during execution of illegal instructions. The internal structure of the design yields relatively high performance, with a significant decrease, relative to other microprocessors that perform the same functions, in the number of microcycles needed to execute macroinstructions. The problem meant to be solved in designing this microprocessor was to provide a modest level of computational capability in a general-purpose processor while adding as little as possible to the power demand, size, and weight of a system into which the microprocessor would be incorporated. As designed, this microprocessor consumes very little power and occupies only a small portion of a typical modern ASIC or FPGA. The microprocessor operates at a rate of about 4 million instructions per second with clock frequency of 20 MHz.

  11. Fermilab ACP multi-microprocessor project

    International Nuclear Information System (INIS)

    Gaines, I.; Areti, H.; Biel, J.; Bracker, S.; Case, G.; Fischler, M.; Husby, D.; Nash, T.

    1984-08-01

    We report on the status of the Fermilab Advanced Computer Program's project to provide more cost-effective computing engines for the high energy physics community. The project will exploit the cheap, but powerful, commercial microprocessors now available by constructing modular multi-microprocessor systems. A working test bed system as well as plans for the next stages of the project are described

  12. Microprocessor aided data acquisition at VEDAS

    International Nuclear Information System (INIS)

    Ziem, P.; Drescher, B.; Kapper, K.; Kowallik, R.

    1985-01-01

    Three microprocessor systems have been developed to support data acquisition in nuclear physics multiparameter experiments. A bit-slice processor accumulates up to 256 1-dim spectra and 16 2-dim spectra. A microprocessor, based on the AM 29116 ALU, performs a fast consistency check on the coincidence data. A VME-Bus double-processor displays a colored scatterplot

  13. Microprocessor system for data acquisition and processing for the Flora device

    International Nuclear Information System (INIS)

    Klimov, V.M.

    1986-01-01

    ''VEhFORMIKA'' microprocessor system for data collection and processing when conducting experiments at the ''Flora'' device is described, its application is grounded. The complex allows one to conduct investigations using multichannel methods and exercise the device electrophysical control

  14. CFD-simulation of radiator for air cooling of microprocessors in a limitided space

    Directory of Open Access Journals (Sweden)

    Trofimov V. E.

    2016-12-01

    Full Text Available One of the final stages of microprocessors development is heat test. This procedure is performed on a special stand, the main element of which is the switching PCB with one or more mounted microprocessor sockets, chipsets, interfaces, jumpers and other components which provide various modes of microprocessor operation. The temperature of microprocessor housing is typically changed using thermoelectric module. The cold surface of the module with controlled temperature is in direct thermal contact with the microprocessor housing designed for cooler installation. On the hot surface of the module a radiator is mounted. The radiator dissipates the cumulative heat flow from both the microprocessor and the module. High density PCB layout, the requirement of free access to the jumpers and interfaces, and the presence of numerous sensors limit the space for radiator mounting and require the use of an extremely compact radiator, especially in air cooling conditions. One of the possible solutions for this problem may reduce the area of the radiator heat-transfer surfaces due to a sharp growth of the heat transfer coefficient without increasing the air flow rate. To ensure a sharp growth of heat transfer coefficient on the heat-transfer surface one should make in the surface one or more dead-end cavities into which the impact air jets would flow. CFD simulation of this type of radiator has been conducted. The heat-aerodynamic characteristics and design recommendations for removing heat from microprocessors in a limited space have been determined.

  15. Practical design of digital circuits basic logic to microprocessors

    CERN Document Server

    Kampel, Ian

    1983-01-01

    Practical Design of Digital Circuits: Basic Logic to Microprocessors demonstrates the practical aspects of digital circuit design. The intention is to give the reader sufficient confidence to embark upon his own design projects utilizing digital integrated circuits as soon as possible. The book is organized into three parts. Part 1 teaches the basic principles of practical design, and introduces the designer to his """"tools"""" - or rather, the range of devices that can be called upon. Part 2 shows the designer how to put these together into viable designs. It includes two detailed descriptio

  16. Microprocessor, Setx, Xrn2, and Rrp6 Co-operate to Induce Premature Termination of Transcription by RNAPII

    NARCIS (Netherlands)

    Wagschal, Alexandre; Rousset, Emilie; Basavarajaiah, Poornima; Contreras, Xavier; Harwig, Alex; Laurent-Chabalier, Sabine; Nakamura, Mirai; Chen, Xin; Zhang, Ke; Meziane, Oussama; Boyer, Frédéric; Parrinello, Hugues; Berkhout, Ben; Terzian, Christophe; Benkirane, Monsef; Kiernan, Rosemary

    2012-01-01

    Transcription elongation is increasingly recognized as an important mechanism of gene regulation. Here, we show that microprocessor controls gene expression in an RNAi-independent manner. Microprocessor orchestrates the recruitment of termination factors Setx and Xrn2, and the 30-50 exoribonuclease,

  17. Microprocessor based image processing system

    International Nuclear Information System (INIS)

    Mirza, M.I.; Siddiqui, M.N.; Rangoonwala, A.

    1987-01-01

    Rapid developments in the production of integrated circuits and introduction of sophisticated 8,16 and now 32 bit microprocessor based computers, have set new trends in computer applications. Nowadays the users by investing much less money can make optimal use of smaller systems by getting them custom-tailored according to their requirements. During the past decade there have been great advancements in the field of computer Graphics and consequently, 'Image Processing' has emerged as a separate independent field. Image Processing is being used in a number of disciplines. In the Medical Sciences, it is used to construct pseudo color images from computer aided tomography (CAT) or positron emission tomography (PET) scanners. Art, advertising and publishing people use pseudo colours in pursuit of more effective graphics. Structural engineers use Image Processing to examine weld X-rays to search for imperfections. Photographers use Image Processing for various enhancements which are difficult to achieve in a conventional dark room. (author)

  18. Nonconformance in electromechanical output relays of microprocessor-based protection devices under actual operating conditions

    OpenAIRE

    Gurevich, Vladimir

    2006-01-01

    Microprocessor-based protection relays are gradually driving out traditional electromechanical and even electronic protection devices from virtually all fields of power and electrical engineering. In this paper, one of many problems of microprocessor-based relays is discussed: nonconformance of miniature electromechanical output relays under actual operation conditions: switching inductive loads (with tripping CB coils or lockout relay coils) at 220 VDC, and "dry" switching of some control ci...

  19. G-cueing microcontroller (a microprocessor application in simulators)

    Science.gov (United States)

    Horattas, C. G.

    1980-01-01

    A g cueing microcontroller is described which consists of a tandem pair of microprocessors, dedicated to the task of simulating pilot sensed cues caused by gravity effects. This task includes execution of a g cueing model which drives actuators that alter the configuration of the pilot's seat. The g cueing microcontroller receives acceleration commands from the aerodynamics model in the main computer and creates the stimuli that produce physical acceleration effects of the aircraft seat on the pilots anatomy. One of the two microprocessors is a fixed instruction processor that performs all control and interface functions. The other, a specially designed bipolar bit slice microprocessor, is a microprogrammable processor dedicated to all arithmetic operations. The two processors communicate with each other by a shared memory. The g cueing microcontroller contains its own dedicated I/O conversion modules for interface with the seat actuators and controls, and a DMA controller for interfacing with the simulation computer. Any application which can be microcoded within the available memory, the available real time and the available I/O channels, could be implemented in the same controller.

  20. Real time computer system with distributed microprocessors

    International Nuclear Information System (INIS)

    Heger, D.; Steusloff, H.; Syrbe, M.

    1979-01-01

    The usual centralized structure of computer systems, especially of process computer systems, cannot sufficiently use the progress of very large-scale integrated semiconductor technology with respect to increasing the reliability and performance and to decreasing the expenses especially of the external periphery. This and the increasing demands on process control systems has led the authors to generally examine the structure of such systems and to adapt it to the new surroundings. Computer systems with distributed, optical fibre-coupled microprocessors allow a very favourable problem-solving with decentralized controlled buslines and functional redundancy with automatic fault diagnosis and reconfiguration. A fit programming system supports these hardware properties: PEARL for multicomputer systems, dynamic loader, processor and network operating system. The necessary design principles for this are proved mainly theoretically and by value analysis. An optimal overall system of this new generation of process control systems was established, supported by results of 2 PDV projects (modular operating systems, input/output colour screen system as control panel), for the purpose of testing by apllying the system for the control of 28 pit furnaces of a steel work. (orig.) [de

  1. Overview of real-time operating systems on microprocessor platforms

    International Nuclear Information System (INIS)

    Luong, T.T.

    1994-01-01

    This paper attempts to overview the real-time operating systems on microprocessor platforms in the field of experimental physics facility controls. The key issues regarding operating systems as well as standards and development environment are discussed. As an illustration, some current industrial products are indicated. Also, real-time systems operating in some institutes of the EPS/EPCS inter divisional group are reviewed. (author). 3 refs., 4 figs

  2. Microprocessor Protection of Power Reducing Transformers

    Directory of Open Access Journals (Sweden)

    F. A. Romanuk

    2011-01-01

    Full Text Available The paper contains analysis of advantages and disadvantages of existing differential protection terminals of power reducing transformers. The paper shows that there are good reasons to develop microprocessor protection of power reducing transformer which contains required functions and settings and which is based on Belarusian principles of relay protection system construction. The paper presents functional structure of microprocessor terminal of power reducing transformer which is developed. 

  3. Microprocessor Protection of Power Reducing Transformers

    OpenAIRE

    F. A. Romanuk; S. P. Korolev; M. S. Loman

    2011-01-01

    The paper contains analysis of advantages and disadvantages of existing differential protection terminals of power reducing transformers. The paper shows that there are good reasons to develop microprocessor protection of power reducing transformer which contains required functions and settings and which is based on Belarusian principles of relay protection system construction. The paper presents functional structure of microprocessor terminal of power reducing transformer which is developed. 

  4. ''NICRO'' microprogramming language for sectional microprocessors

    International Nuclear Information System (INIS)

    Semenov, Yu.A.; Chudakov, V.N.

    1982-01-01

    ''MICRO'' microprogramming input language developed for sectional microprocessors is described. The structure of micromanual, purpose of particular fields, the corresponding mne-- mocodes and requirements they have to meet are considered. Program for integer division with a sign written in the ''MICRO'' language is given as an example. The possibilities of modif ying the translator for its adaptation to different types of processor and microprocessor sets are analyzed

  5. Nuclear criticality evacuation with telemonitoring and microprocessors

    International Nuclear Information System (INIS)

    Fergus, R.W.; Moe, H.J. Sr.

    1979-01-01

    At Argonne National Laboratory, criticality alarms are required at widely separated locations to evacuate personnel in case of accident while emergency teams or maintenance personnel respond from a central location. The system functions have been divided in a similar manner. The alarm site hardware can independently detect a criticality and sound the evacuation signal while general monitoring and routine tests are handled by a communication link to a central monitoring station. The radiation detectors and evacuation sounders at each site are interconnected by a common two conductor cable in a unique telemonitoring format. This format allows both control and data information to be received or transmitted at any point on the cable which can be up to 3000 meters total length. The site microprocessor maintains a current data table, detects several faults, drives a printer, and communicates with the central telemonitoring station. The radiation detectors are made with plastic scintillators and photomultiplier tubes operated in a constant current mode with a 4 decade measurement range. The detectors also respond within microseconds to the criticality radiation burst. These characteristics can be tested with an internal light emitting diode either completely with a manual procedure or routinely with a system test initiated by the central monitoring station. Although the system was developed for a criticality alarm which requires reliable and redundant features, the basic techniques are useable for other monitoring and instrumentation applications

  6. An INTEL 8080 microprocessor development system

    International Nuclear Information System (INIS)

    Horne, P.J.

    1977-01-01

    The INTEL 8080 has become one of the two most widely used microprocessors at CERN, the other being the MOTOROLA 6800. Even thouth this is the case, there have been, to date, only rudimentary facilities available for aiding the development of application programs for this microprocessor. An ideal development system is one which has a sophisticated editing and filing system, an assembler/compiler, and access to the microprocessor application. In many instances access to a PROM programmer is also required, as the application may utilize only PROMs for program storage. With these thoughts in mind, an INTEL 8080 microprocessor development system was implemented in the Proton Synchrotron (PS) Division. This system utilizes a PDP 11/45 as the editing and file-handling machine, and an MSC 8/MOD 80 microcomputer for assembling, PROM programming and debugging user programs at run time. The two machines are linked by an existing CAMAC crate system which will also provide the means of access to microprocessor applications in CAMAC and the interface of the development system to any other application. (Auth.)

  7. Faux Mutagenesis: Teaching Troubleshooting through Controlled Failure

    Science.gov (United States)

    Hartberg, Yasha

    2006-01-01

    By shifting pedagogical goals from obtaining successful mutations to teaching students critical troubleshooting skills, it has been possible to introduce site-directed mutagenesis into an undergraduate teaching laboratory. Described in this study is an inexpensive laboratory exercise in which students follow a slightly modified version of…

  8. Microprocessor system design a practical introduction

    CERN Document Server

    Spinks, Michael J

    2013-01-01

    Microprocessor System Design: A Practical Introduction describes the concepts and techniques incorporated into the design of electronic circuits, particularly microprocessor boards and their peripherals. The book reviews the basic building blocks of the electronic systems composed of digital (logic levels, gate output circuitry) and analog components (resistors, capacitors, diodes, transistors). The text also describes operational amplifiers (op-amp) that use a negative feedback technique to improve the parameters of the op-amp. The design engineer can use programmable array logic (PAL) to rep

  9. Application of microprocessors to radiation protection measurements

    International Nuclear Information System (INIS)

    Zappe, D.; Meldes, C.

    1982-01-01

    In radiation protection measurements signals from radiation detectors or dosemeters have to be transformed into quantities relevant to radiation protection. In most cases this can only be done by taking into account various parameters (e.g. the quality factor). Moreover, the characteristics of the statistical laws of nuclear radiation emission have to be considered. These problems can properly be solved by microprocessors. After reviewing the main properties of microprocessors, some typical examples of applying them to problems of radiation protection measurement are given. (author)

  10. Microprocessor protection relays: new prospects or new problems?

    OpenAIRE

    Gurevich, Vladimir

    2006-01-01

    The internal architecture and principles of operation of microprocessor-based devices including so-called "microprocessor protective relays" have little in common with devices called "electric relays". But microprocessor-based relay protection devices are gradually driving out the traditional electromechanical and even electronic relay protection of virtually from all fields of power and electrical engineering. Advantages of microprocessor-based protection means over traditional ones are far ...

  11. New multi-microprocessor control system of the main ring magnet power supply for the KEK 12 GeV PS

    International Nuclear Information System (INIS)

    Matsumoto, S.; Sueno, T.; Mikawa, K.; Toda, M.; Baba, H.

    1987-01-01

    The new control computer system has been installed at the last June. The main cpu supervised by the Unix covers man-machine interfacing and correction of current deviation in periodic control algorithm. The two sub-cpu are linked by a LAN and supported by a real time multi-task monitor. The one as the output process controller distributes 15 control patterns to 16-bit D/A converters at every 1.67 ms synchronized 6 phase ac line. The other as the input logs B Qf and Qd magnet current and voltage by 7 sets of 16-bit ADC at the same clock. Resulting precision of the currents from beam injection to flat top would be estimated at about a resolution limit of ADC except for current ripple. Ripple currents estimated at several times of an intrinsic ripple in the DCCT

  12. YF22 Model With On-Board On-Line Learning Microprocessors-Based Neural Algorithms for Autopilot and Fault-Tolerant Flight Control Systems

    National Research Council Canada - National Science Library

    Napolitano, Marcello

    2002-01-01

    This project focused on investigating the potential of on-line learning 'hardware-based' neural approximators and controllers to provide fault tolerance capabilities following sensor and actuator failures...

  13. FPGAs Emulate Microprocessors-A Successful Case for HFC NPP Digital I and C Upgrade

    International Nuclear Information System (INIS)

    Hsu, Allen; Crow, Ivan; Reese, Carl; Kim, Jong; Yang, Steve

    2014-01-01

    Field Programmable Gate Arrays (FPGAs), as programmable logic devices (PLDs) have gained a great deal of interests for implementing safety I and C applications in nuclear power plants (NPPs) largely owing to the FPGAs'potential advantage over the currently more common microprocessor-based digital I and C applications. First of all, FPGAs have adequate capabilities for most digital I and C applications in NPPs. Secondly, FPGAs provide products with longer lifetime, improve testability, and reduce the drift which occurs in analog-based systems, from hardware perspective. Thirdly, FPGAs, from software perspective, can be made simpler, less reliant on complex software such as operating systems, which should make FPGAs easier to qualify for nuclear safety applications. Fourthly, FPGAs are less vulnerable to cyber attacks when FPGAs implement the I and C systems that do not contain high-level, general purpose software that may be easily subjected to malicious modifications. Finally, FPGAs can bring cost reduction in an I and C digital upgrade because FPGAs can provide simpler licensing process than microprocessor-based digital I and C, and FPGAs can be implemented more efficiently. This paper will present one successful case for YGN Unit I and C upgrade using FPGA-based components to replace the obsolete Intel 8085 Microprocessor-based controllers. In this case, FPGAs emulated the process of the existing microprocessors and interpreted the execution of CPU processing. More than 160 of the FPGA-based SBC-01 controllers replacing the Intel 8085 Microprocessor-based Printed Circuit Boards have been installed and running successfully for safety I and C applications over the last five years. In this upgrade, the new FPGA-based controller board SBC-01 emulated the functions of Intel 8085 microprocessor correctly. It is a successful and cost-effective upgrade.vIn this paper, lifecycle design and implementation process and rigorous V and V activities that were used in the

  14. FPGAs Emulate Microprocessors-A Successful Case for HFC NPP Digital I and C Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Allen; Crow, Ivan; Reese, Carl; Kim, Jong; Yang, Steve [Doosan HF Controls Corp, Carrollton (United States)

    2014-08-15

    Field Programmable Gate Arrays (FPGAs), as programmable logic devices (PLDs) have gained a great deal of interests for implementing safety I and C applications in nuclear power plants (NPPs) largely owing to the FPGAs'potential advantage over the currently more common microprocessor-based digital I and C applications. First of all, FPGAs have adequate capabilities for most digital I and C applications in NPPs. Secondly, FPGAs provide products with longer lifetime, improve testability, and reduce the drift which occurs in analog-based systems, from hardware perspective. Thirdly, FPGAs, from software perspective, can be made simpler, less reliant on complex software such as operating systems, which should make FPGAs easier to qualify for nuclear safety applications. Fourthly, FPGAs are less vulnerable to cyber attacks when FPGAs implement the I and C systems that do not contain high-level, general purpose software that may be easily subjected to malicious modifications. Finally, FPGAs can bring cost reduction in an I and C digital upgrade because FPGAs can provide simpler licensing process than microprocessor-based digital I and C, and FPGAs can be implemented more efficiently. This paper will present one successful case for YGN Unit I and C upgrade using FPGA-based components to replace the obsolete Intel 8085 Microprocessor-based controllers. In this case, FPGAs emulated the process of the existing microprocessors and interpreted the execution of CPU processing. More than 160 of the FPGA-based SBC-01 controllers replacing the Intel 8085 Microprocessor-based Printed Circuit Boards have been installed and running successfully for safety I and C applications over the last five years. In this upgrade, the new FPGA-based controller board SBC-01 emulated the functions of Intel 8085 microprocessor correctly. It is a successful and cost-effective upgrade.vIn this paper, lifecycle design and implementation process and rigorous V and V activities that were used in the

  15. Integration of 4 microprocessors for the pre-processing and control of a nuclear physics experiment d(e,e'p)

    International Nuclear Information System (INIS)

    Ben Hamadou, Abdelmajid.

    1979-01-01

    The purpose of the experiments undertaken is to measure the binding energy and the momentum of a proton in the nucleus; they are carried out in the Saclay electron linear accelerator. The configuration of the data acquisition system was chosen following a study of local requirements implying the need to use the new integrated and fast technologies. The objectives sought are: a) increase the processing speed of the three kinds of occurrences, i.e. the single electron occurrences relating to the 600 spectrometer, the single proton occurrences relating to the 900 spectrometer and the coincident occurrences relating to the two 600 and 900 spectrometers, b) facilitate the control of the acquisition, c) increase the reliability and reduce the down-time that is always taken from the allocated beam time. Several systems were considered and the one finally adopted is a centralized network system. It is a grouping of three micro-computers controlled by a more powerful micro-computer called GIMINI that is in turn connected to the PDP 15 computer with a view to using its resources not available on GIMINI. The on-line processing, acquisition control and memory control are described [fr

  16. A microprocessor based area monitor system for neutron and gamma radiation

    International Nuclear Information System (INIS)

    Wilhelm, R.; Heusser, G.

    1980-01-01

    The conventional electronics of the area monitors at the MPI-Heidelberg accelerators have been replaced by a microprocessor system consisting of individual detector-microprocessors and a central microcomputer. The detector microprocessors convert the count rates of BF3 and GM counter tubes into dose rates and control three different radiation thresholds (failure, low and high level). Different warning signals are operated directly by the detector processors, whereas the dose rates are transferred to the central microcomputer. Here the data are processed for recording on tape and displaying on TV monitors. The detector as well as the central processors have been developed on the basis of a 16-bit microprocessor. In the control rooms the dose rates of the individual monitors are displayed and on an indicator board showing the different locations, the high radiation level and the state of the doors (open, locked, and closed, locked but open) are sianaled by different LED. If a high radiation threshold is surpassed, the doors adjacent to that area can be locked either by switches on the indicator board or automatically. Within the experimental area, the low and high radiation level is indicated by acoustic and light signals. The whole concept permits keeping the absorbed doses of the personnel as low as possible without affecting the flexibility of the experimental operations. The independence of the microprocessor driven area monitors guarantees a high reliability. Compared to conventional electronics the advantages of the system are its reliability and cost. (Author)

  17. Microprocessors: From basic chips to complete systems

    International Nuclear Information System (INIS)

    Dobinson, R.W.

    1985-01-01

    These lectures aim to present and explain in general terms some of the characteristics of microprocessor chips and associated components. They show how systems are synthesized from the basic integrated circuit building blocks which are currently available; processor, memory, input-output (I/0) devices, etc. (orig./HSI)

  18. Experiment-Based Teaching in Advanced Control Engineering

    Science.gov (United States)

    Precup, R.-E.; Preitl, S.; Radac, M.-B.; Petriu, E. M.; Dragos, C.-A.; Tar, J. K.

    2011-01-01

    This paper discusses an experiment-based approach to teaching an advanced control engineering syllabus involving controlled plant analysis and modeling, control structures and algorithms, real-time laboratory experiments, and their assessment. These experiments are structured around the representative case of the longitudinal slip control of an…

  19. Use of a microprocessor in a remote working level monitor

    International Nuclear Information System (INIS)

    Keefe, D.J.; McDowell, W.P.; Groer, P.G.

    1976-01-01

    The instrument described measures the short-lived 222 Rn-daughter concentrations and the Working Level (WL) in sealed ''hot chambers'' located in uranium mines. Radiation-induced pulses from two separate sensors are transmitted through 500 ft. cables to a microprocessor, which processes the pulses and controls the operation of the system. A read-only memory stores a fixed program which is used to calculate the desired concentrations. The results are printed as pCi/l (Rn-daughter concentrations) and WL

  20. Microprocessor Card for Cuban Series polarimeters Laserpol

    International Nuclear Information System (INIS)

    Arista Romeu, E.; Mora Mazorra, W.

    2012-01-01

    We present the design consists of a card based on a micro-processor 8-bit adds new software components and their basic living, which allow to deliver new services and expand the possibilities for use in other applications of the polarimeter LASERPOL series, as the polarimetric detection. Given the limitations of the original card it was necessary to introduce a series of changes that would allow to address new user requirements, and expand the possible applications of the instruments. This was done the expansion of the capacity of the EPROM and RAM memory, the decoder circuit was implemented memory map using a programmable integrated circuit, and introduced a real time clock with nonvolatile RAM, these features are exploited to the introduction of new features such as the realization of the polarimeter calibration by the user from a sample pattern or a calibration pattern used as a reference, and the incorporation of the time and date to the reports of measurements required industry for quality control processes. Card that is achieved along with the rest of the components is compatible with polarimeters LASERPOL 101M Series, 3M and LP4, pin to pin, which facilitates their incorporation into the polarimeters in operation in the industry 'in situ' replacement cards from previous models, allowing to extend the possibilities of statistical processing, precision and accuracy of the instruments. Improved measurements in the industry, resulting in significant savings by elimination of losses in production and raw materials. The improved response speed of reading the polarimeters LASERPOL Use and polarimetric detectors. (Author)

  1. High speed serial link for UA1 microprocessor network

    CERN Document Server

    Cittolin, S; Zurfluh, E

    1981-01-01

    The UA1 data acquisition system consists of a set of distributed microprocessor units. An interprocessor link, independent of the CAMAC data readout, has been developed in order to have continuous remote control and run-time data handling, e.g. transmission of calibration programs/parameters, equipment test/status and histogram accumulation. The data transmission system is designed to be used in a loop configuration equipped with transceivers for twisted pair cables (RS-422). As an economical system, it is running as an ancillary serial loop-link between microprocessors, like Data Acquisition Crate Controllers and systems with distributed intelligence. The software driver consists of a loop-controller package, which may run in a BAMBI Computer Language environment and a fully interrupt controlled program for all other secondary stations. A special single-character mode provides a handy link for remote debugging in a pseudo-full-duplex mode. The format is based on the HDLC protocol without sequence numbering. ...

  2. High speed serial link for UA1 microprocessor network

    International Nuclear Information System (INIS)

    Cittolin, S.; Loefstedt, B.; Zurfluh, E.

    1981-01-01

    The UA1 data acquisition system consists of a set of distributed microprocessor units. An interprocessor link, independent of the CAMAC data readout, has been developed in order to have continuous remote control and run-time data handling, e.g. transmission of calibration programs/parameters, equipment rest/status and histogram accumulation. The data transmission system is designed to be used in a loop configuration equipped with transceivers for twisted pair cables (RS-422). As an economical system it is running as an ancillary serial loop-link between microprocessors Like Data Acquisition Crate Controllers and systems with distributed intelligence. The software driver consists of a loop-controller package, which may run in a BAMBI Computer Language environment and a fully interrupt controlled program for all other secondary stations. A special single-character mode provides a handy link for remote debugging in a pseudo-full-duplex mode. The format is based on the HDLC protocol without sequence numbering. The Chip MC-6854 from Motorola, Inc. enables an implementation with few components. (orig.)

  3. High speed serial link for UA1 microprocessor network

    CERN Document Server

    Cittolin, Sergio; Zurfluh, E

    1981-01-01

    The UA1 data acquisition system consists of a set of distributed microprocessor units. An interprocessor link, independent of the CAMAC data readout, has been developed in order to have continuous remote control and run-time data handling, e.g. transmission of calibration programs/parameters, equipment test/status and histogram accumulation. The data transmission system is designed to be used in a loop configuration equipped with transceivers for twisted pair cables (RS-422). As an economical system, it is running as an ancillary serial loop-link between microprocessors, like data acquisition crate controllers and systems with distributed intelligence. The software driver consists of a loop-controller package, which may run in a BAMBI computer language environment and a fully interrupt controlled program for all other secondary stations. A special single-character mode provides a handy link for remote debugging in a pseudo-full-duplex mode. The format is based on the HDLC protocol without sequence numbering. ...

  4. Concomitant production of two proteases and alpha-amylase by a novel strain of Bacillus subtilis in a microprocessor controlled bioreactor

    Directory of Open Access Journals (Sweden)

    Hamid Mukhtar

    2012-09-01

    Full Text Available We describe the simultaneous production of Bacillus subtilis based proteases and alpha amylase using a computer controlled laboratory scale 7.5 L batch bioreactor. The present strain is the first to be reported that concomitantly produces these two industrially important enzymes. The growth and sporulation of Bacillus subtilis was monitored and maximum production of alkaline protease and alpha amylase was found to coincide with maximum sporulation. Two types of proteases were detected in the fermentation broth; a neutral and an alkaline protease most active in a pH range of 7.0-8.0 and 8.0-10, respectively. Maximum production of proteases was observed at an incubation temperature of 37ºC while that of alpha amylase was observed at 40ºC. The optimum aeration and agitation levels for protease production were 0.6 L/L/min and 200rpm, respectively, and for alpha amylase were 0.6 L/L/min and 150 rpm. The kinetic parameters Yp/x and qp were also found to be significant at the given fermentation conditions.

  5. Microprocessor system for data acquisition processing and display for Auger electrons spectrometer

    International Nuclear Information System (INIS)

    Pawlowski, Z.; Cudny, W.; Hildebrandt, S.; Marzec, J.; Walentek, J.; Zaremba, K.

    1984-01-01

    Data acquisition system for Auger electron spectrometry is developed. The system is used for chemical and structural analysis of materials and consists of a cylindrical mirror analyzer being a measuring spectrometer device, CAMAC unit and control unit. The control unit comprises a microcomputer based on INTEL 8080 microprocessor and display

  6. Microprocessor based data acquisition system for Moessbauer spectrometer

    International Nuclear Information System (INIS)

    Patwardhan, P.K.; Indurkar, V.S.

    1981-01-01

    A data acquisition system, for Moessbauer spectrometer and other probability distribution spectrum is described. This utilizes the advantages of incorporating a microcomputer for providing a flexible analytical capability and speed of hard wired MCS unit updating channel contents in DMA. Holbourn, Player and Woodhams have recently described a microprocessor controlled Moessbauer spectrometer where microprocessor performs the task of updating channel contents, requiring about 60 micro seconds in interrupt mode. This imposes restrictions on increasing the channel number and on increasing the velocity scan frequency in order to cover higher velocity ranges. The system described in this article performs data acquisition in faster direct memory access. It is a two module system, (1) MCS module (2) Microcomputer module, arranged around a common address, data and control buses. The microcomputer module has an access to the system data during flyback periods and can be programmed for the task of monitor on progess of experiment and as a manipulator of various control operations needed during experiment. The system firmware includes: (1) MONITOR (2) BLOCK-TRANSFER (3) DATA-SMOOTHING (4) DECIMAL-CONVERTER (5) MATH. The scope of this firmware is briefly described. (author)

  7. MICROPROCESSOR CONTROLLED FOR SMART DISTRI ESSOR ...

    African Journals Online (AJOL)

    eobe

    insufficient power available for use ar underdeveloped ... 1.2 Causes of Power Loss in a Distribution System. 1.2 Causes of Power Loss ... 415/12V step down transformer (TR1), an 1C bridge rectifier (BR1), a .... Protection. Journal of Electrical ...

  8. Microprocessor Control of Low Speed VSTOL Flight.

    Science.gov (United States)

    1979-06-08

    7 WRITE (ZCOIJT, 12) 1FC’rMAT(" TMANTTOIi:R"S M) READ( ZC’l-IT- 14)TMAX C TI: 6. T=ft.TZ T=T* IELT +T(-) GO1 TO’ 4 W R ITE ( OUT, 10U) 1C) F’:’RrMrAI...N IF( IN EC7!. 0) PRRINT, "ENTER A BY ROWS, I ROW/LINE" PRINT DC :: I =I, N E: REAE( IN, 50-) (A( I, .J), .J=I, N) IF( I OUT . NE. 0) WRITE ( IOUT, 510... WRITE ( IOCl, 510C) Di :30 I=1, N IF( IOUT . NE. 0) WRITE ( IOUT, 520) (A( I, J), J=1, N) 3:)’ WRITE (IO, 520) (A(I, J), .1=1, N) CALL FADD(A, E:, AX

  9. Microprocessors in physics experiments at SLAC

    International Nuclear Information System (INIS)

    Rochester, L.S.

    1981-01-01

    The increasing size and complexity of high energy physics experiments is changing the way data are collected. To implement a trigger or event filter requires complex logic which may have to be modified as the experiment proceeds. Simply to monitor a detector, large amounts of data must be processed online. The use of microprocessors or other programmable devices can help to achieve these ends flexibly and economically. At SLAC, a number of microprocessor-based systems have been built and are in use in experimental setups, and others are now being developed. This talk is a review of existing systems and their use in experiments, and of developments in progress and future plans. (orig.)

  10. Microprocessors in physics experiments at SLAC

    International Nuclear Information System (INIS)

    Rochester, L.S.

    1981-04-01

    The increasing size and complexity of high energy physics experiments is changing the way data are collected. To implement a trigger or event filter requires complex logic which may have to be modified as the experiment proceeds. Simply to monitor a detector, large amounts of data must be processed on line. The use of microprocessors or other programmable devices can help to achieve these ends flexibly and economically. At SLAC, a number of microprocessor-based systems have been built and are in use in experimental setups, and others are now being developed. This talk is a review of existing systems and their use in experiments, and of developments in progress and future plans

  11. Some software algorithms for microprocessor ratemeters

    International Nuclear Information System (INIS)

    Savic, Z.

    1991-01-01

    After a review of the basic theoretical ratemeter problem and a general discussion of microprocessor ratemeters, a short insight into their hardware organization is given. Three software algorithms are described: the old ones the quasi-exponential and floating mean algorithm, and a new weighted moving average algorithm. The equations for statistical characterization of the new algorithm are given and an intercomparison is made. It is concluded that the new algorithm has statistical advantages over the old ones. (orig.)

  12. Some software algorithms for microprocessor ratemeters

    Energy Technology Data Exchange (ETDEWEB)

    Savic, Z. (Military Technical Inst., Belgrade (Yugoslavia))

    1991-03-15

    After a review of the basic theoretical ratemeter problem and a general discussion of microprocessor ratemeters, a short insight into their hardware organization is given. Three software algorithms are described: the old ones the quasi-exponential and floating mean algorithm, and a new weighted moving average algorithm. The equations for statistical characterization of the new algorithm are given and an intercomparison is made. It is concluded that the new algorithm has statistical advantages over the old ones. (orig.).

  13. 基于微处理器的风力发电机综合优化控制策略%Microprocessor-based Optimal Control Strategy for Wind Turbines

    Institute of Scientific and Technical Information of China (English)

    许磊; 张磊; 蒋苗苗; 金立军

    2014-01-01

    Low density,randomness and instability of wind energy gives rise to such problems of wind power generation as low efficiency and unstable electric energy.In this paper,microprocessor control is used to integrate yaw system and variable propeller pitch control system to realize the optimal control of the wind turbine.Wind direction/speed information obtained by the wind vane is sent to the CPU,and based on the comprehensive analysis and diagnosis on the wind energy and wind turbine performance,the microcomputer controller will give various operational commands.When the wind speed is lower than rated speed,the yaw control system will be started to ensure maximum wind energy for the wind turbine.When the wind speed is higher than rated speed,the yaw system and variable pitch control system will both be started and the pitch angle is regulated according to the wind speed so as to keep constant turbine output power.In the case of excessively high wind speed,emergency stop will be actuated to adjust the pitch angle to achieve parallel blades and wind direction to protect the turbine.Research results show that this method can not only achieve maximal utilization of wind energy,but also improve the stability of output power,thus ensuring the electric energy quality of distributed power grid connection.With a simple control process and smooth transit,this scheme has a good application perspective.%由于风能能量密度低、随机性和不稳定性的特点,给风力发电带来发电效率低、电能不稳定等问题。提出使用微处理器控制,集偏航系统和变桨距控制系统为一体,共同实现风机的优化控制。将风向标测得的风向和风速信息输入给CPU,通过对风能及风机性能的综合分析和决策,由微控制器发出各项操作指令。当风速小于额定风速时,启动偏航控制系统,始终保证风机获得最大风能;当风速大于额定风速时,同时启动偏航系统和变桨距控制系

  14. Towards a modern concept for teaching control engineering

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Andersen, Jens Christian; Ravn, Ole

    2009-01-01

    A new concept for teaching an introduction course in control engineering is described. The main issue is that the concept is based directly on the students’ knowledge from previous courses in math, physics and electronics. This will provid the students with a more direct and clear link between...... these previous courses and athe introduction course in control theory. As a direct consequence, it is now possible to introduce and use feedback control from the first lecture. The new teaching concept has had a major effect on the exam results. In the two semesters before the changes, only 53% of the students...

  15. Playful teaching between freedom and control

    DEFF Research Database (Denmark)

    Nørgård, Rikke Toft; Toft-Nielsen, Claus; Whitton, Nicola

    2016-01-01

    Within higher education today, a culture is emerging characterized by fear of failure, avoidance of risk-taking, extrinsic motivation, and goal-oriented behavior – what we call a ‘gameful approach’ to HE. This paper uses the concept of ‘the magic circle’ – a central metaphor within game studies...... as it invites for a different type of teaching and learning environment, providing a safe educational space, in which mistake-making is not only encouraged, but engrained into the system. Taking up a ‘lusory attitude’ in the magic circle can create freedom, support playfulness and intrinsic motivation, and make...

  16. Using Paper Helicopters to Teach Statistical Process Control

    Science.gov (United States)

    Johnson, Danny J.

    2011-01-01

    This hands-on project uses a paper helicopter to teach students how to distinguish between common and special causes of variability when developing and using statistical process control charts. It allows the student to experience a process that is out-of-control due to imprecise or incomplete product design specifications and to discover how the…

  17. Teaching Quality Control with Chocolate Chip Cookies

    Science.gov (United States)

    Baker, Ardith

    2014-01-01

    Chocolate chip cookies are used to illustrate the importance and effectiveness of control charts in Statistical Process Control. By counting the number of chocolate chips, creating the spreadsheet, calculating the control limits and graphing the control charts, the student becomes actively engaged in the learning process. In addition, examining…

  18. Using perceptual control theory to analyse technology integration in teaching

    Directory of Open Access Journals (Sweden)

    D W Govender

    2013-07-01

    Full Text Available Contrary to the more traditional scenario of instructor-focused presentation, contemporary education allows individuals to embrace modern technological advances such as computers to concur with, conceptualize and substantiate matters presented before them. Transition from instructor-focused to student-centred presentation is prone to dissension and strife, motivating educators to assess elements of learner-centred teaching in conjunction with traditional teaching mechanisms and how individuals perceive and comprehend information (Andersson, 2008; Kiboss, 2010; United Nations Educational, Scientific and Cultural Organization (UNESCO, 2004. Computers can assist when used in the traditional teacher-student interface, but consideration must be given to teaching method variations and the students embracing these learning applications. If learner-centred teaching is to become accepted certain elements need to be introduced: revision of educators’ learning and teaching applications, time to facilitate knowledge and use of applicable contemporary technologies, and methods compatible with various technologies (Kiboss, 2010. Change is often not easy – while acknowledging the need to alter and revise methods they were taught to instil, educators may fail to embrace incorporation of technology into their teaching platform. Why are educators, who are quite knowledgeable and competent in computer applications and their merits, failing to embrace the benefits of technology in the classroom? A critical assessment of this mandates a transdisciplinary disposition in order to come to an amenable resolution. Perception, inhibition, ignorance and goals are just some reasons why educators are reluctant to incorporate technology despite their proficiency. Perceptual control theory (PCT will be implemented to assess these reasons as a means towards achieving change and assessing how to move forward. Issues associated with educators’ short- and long-term goals as

  19. Application of a microprocessor system to stream monitoring

    International Nuclear Information System (INIS)

    Oakes, T.W.; Shank, K.E.

    1978-01-01

    Low-level liquid wastes originating from the Oak Ridge National Laboratory (ORNL) are discharged, after treatment, into White Oak Creek, which is a small tributary of the Clinch River located in East Tennessee. Samples of White Oak Creek discharges are collected at White Oak Dam by a continuous digital proportional water sampler and analyzed weekly for radioactivity. The sampler contains a control system with a microprocessor that has been programmed to solve nonlinear weir equations. This system was designed and installed at ORNL by the Instrumentation and Controls Division and was tested by the Environmental Surveillance and Evaluation Section of the Industrial Safety and Applied Health Physics Division. The control system was designed to measure water flow rates from 0 to 334 ft 3 /sec to within 0.1%. Results of our test program and possible applications to other liquid sampling needs are discussed

  20. New On-board Microprocessors

    Science.gov (United States)

    Weigand, R.

    Two new processor devices have been developed for the use on board of spacecrafts. An 8-bit 8032-microcontroller targets typical controlling applications in instruments and sub-systems, or could be used as a main processor on small satellites, whereas the LEON 32-bit SPARC processor can be used for high performance controlling and data processing tasks. The ADV80S32 is fully compliant to the Intel 80x1 architecture and instruction set, extended by additional peripherals, 512 bytes on-chip RAM and a bootstrap PROM, which allows downloading the application software using the CCSDS PacketWire pro- tocol. The memory controller provides a de-multiplexed address/data bus, and allows to access up to 16 MB data and 8 MB program RAM. The peripherals have been de- signed for the specific needs of a spacecraft, such as serial interfaces compatible to RS232, PacketWire and TTC-B-01, counters/timers for extended duration and a CRC calculation unit accelerating the CCSDS TM/TC protocol. The 0.5 um Atmel manu- facturing technology (MG2RT) provides latch-up and total dose immunity; SEU fault immunity is implemented by using SEU hardened Flip-Flops and EDAC protection of internal and external memories. The maximum clock frequency of 20 MHz allows a processing power of 3 MIPS. Engineering samples are available. For SW develop- ment, various SW packages for the 8051 architecture are on the market. The LEON processor implements a 32-bit SPARC V8 architecture, including all the multiply and divide instructions, complemented by a floating-point unit (FPU). It includes several standard peripherals, such as timers/watchdog, interrupt controller, UARTs, parallel I/Os and a memory controller, allowing to use 8, 16 and 32 bit PROM, SRAM or memory mapped I/O. With on-chip separate instruction and data caches, almost one instruction per clock cycle can be reached in some applications. A 33-MHz 32-bit PCI master/target interface and a PCI arbiter allow operating the device in a plug-in card

  1. Self-teaching neural network learns difficult reactor control problem

    International Nuclear Information System (INIS)

    Jouse, W.C.

    1989-01-01

    A self-teaching neural network used as an adaptive controller quickly learns to control an unstable reactor configuration. The network models the behavior of a human operator. It is trained by allowing it to operate the reactivity control impulsively. It is punished whenever either the power or fuel temperature stray outside technical limits. Using a simple paradigm, the network constructs an internal representation of the punishment and of the reactor system. The reactor is constrained to small power orbits

  2. Microprocessor tester for the treat upgrade reactor trip system

    International Nuclear Information System (INIS)

    Lenkszus, F.R.; Bucher, R.G.

    1984-01-01

    The upgrading of the Transient Reactor Test (TREAT) Facility at ANL-Idaho has been designed to provide additional experimental capabilities for the study of core disruptive accident (CDA) phenomena. In addition, a programmable Automated Reactor Control System (ARCS) will permit high-power transients up to 11,000 MW having a controlled reactor period of from 15 to 0.1 sec. These modifications to the core neutronics will improve simulation of LMFBR accident conditions. Finally, a sophisticated, multiply-redundant safety system, the Reactor Trip System (RTS), will provide safe operation for both steady state and transient production operating modes. To insure that this complex safety system is functioning properly, a Dedicated Microprocessor Tester (DMT) has been implemented to perform a thorough checkout of the RTS prior to all TREAT operations

  3. Teaching Self-Control with Qualitatively Different Reinforcers

    Science.gov (United States)

    Passage, Michael; Tincani, Matt; Hantula, Donald A.

    2012-01-01

    This study examined the effectiveness of using qualitatively different reinforcers to teach self-control to an adolescent boy who had been diagnosed with an intellectual disability. First, he was instructed to engage in an activity without programmed reinforcement. Next, he was instructed to engage in the activity under a two-choice fixed-duration…

  4. System architecture for microprocessor based protection system

    International Nuclear Information System (INIS)

    Gallagher, J.M. Jr.; Lilly, G.M.

    1976-01-01

    This paper discusses the architectural design features to be employed by Westinghouse in the application of distributed digital processing techniques to the protection system. While the title of the paper makes specific reference to microprocessors, this is only one (and the newest) of the building blocks which constitutes a distributed digital processing system. The actual system structure (as realized through utilization of the various building blocks) is established through considerations of reliability, licensability, and cost. It is the intent of the paper to address these considerations licenstions as they relate to the architectural design features. (orig.) [de

  5. Microprocessor-based accelerating power level detector

    Energy Technology Data Exchange (ETDEWEB)

    Nagpal, M.; Zarecki, W.; Albrecht, J.C.

    1994-01-01

    An accelerating power level detector was built using state-of-the-art microprocessor technology at Powertech Labs Inc. The detector will monitor the real power flowing in two 300 kV transmission lines out of Kemano Hydroelectric Generating Station and will detect any sudden loss of load due to a fault on either line under certain pre-selected power flow conditions. This paper discusses the criteria of operation for the detector and its implementation details, including digital processing, hardware, and software.

  6. Microprocessor architectures RISC, CISC and DSP

    CERN Document Server

    Heath, Steve

    1995-01-01

    'Why are there all these different processor architectures and what do they all mean? Which processor will I use? How should I choose it?' Given the task of selecting an architecture or design approach, both engineers and managers require a knowledge of the whole system and an explanation of the design tradeoffs and their effects. This is information that rarely appears in data sheets or user manuals. This book fills that knowledge gap.Section 1 provides a primer and history of the three basic microprocessor architectures. Section 2 describes the ways in which the architectures react with the

  7. Future microprocessor farms: Offline and online

    International Nuclear Information System (INIS)

    Areti, H.

    1990-01-01

    Microprocessor farms have been successfully employed in high energy physics for both offline analysis and online triggers. As the experiments continue to grow in size, so do the demands for processing power. The preliminary indications are that the large collider experiments will require at least a million VAX-11/780 equivalents of processing power for online trigger decisions and offline event reconstruction. This paper examines the current technology trends and projects the processing power that may be expected with the current farm architectures. 3 refs., 6 figs

  8. TEACHING SELF-CONTROL WITH QUALITATIVELY DIFFERENT REINFORCERS

    OpenAIRE

    Passage, Michael; Tincani, Matt; Hantula, Donald A.

    2012-01-01

    This study examined the effectiveness of using qualitatively different reinforcers to teach self-control to an adolescent boy who had been diagnosed with an intellectual disability. First, he was instructed to engage in an activity without programmed reinforcement. Next, he was instructed to engage in the activity under a two-choice fixed-duration schedule of reinforcement. Finally, he was exposed to self-control training, during which the delay to a more preferred reinforcer was initially sh...

  9. Dynamic instruction set extension of microprocessors with embedded FPGAs

    OpenAIRE

    Bauer, Heiner

    2017-01-01

    Increasingly complex applications and recent shifts in technology scaling have created a large demand for microprocessors which can perform tasks more quickly and more energy efficient. Conventional microarchitectures exploit multiple levels of parallelism to increase instruction throughput and use application specific instruction sets or hardware accelerators to increase energy efficiency. Reconfigurable microprocessors adopt the same principle of providing application specific hardware, how...

  10. Radiation hardened COTS-based 32-bit microprocessor

    International Nuclear Information System (INIS)

    Haddad, N.; Brown, R.; Cronauer, T.; Phan, H.

    1999-01-01

    A high performance radiation hardened 32-bit RISC microprocessor based upon a commercial single chip CPU has been developed. This paper presents the features of radiation hardened microprocessor, the methods used to radiation harden this device, the results of radiation testing, and shows that the RAD6000 is well-suited for the vast majority of space applications. (authors)

  11. Software tools for microprocessor based systems

    International Nuclear Information System (INIS)

    Halatsis, C.

    1981-01-01

    After a short review of the hardware and/or software tools for the development of single-chip, fixed instruction set microprocessor-based sytems we focus on the software tools for designing systems based on microprogrammed bit-sliced microprocessors. Emphasis is placed on meta-microassemblers and simulation facilties at the register-transfer-level and architecture level. We review available meta-microassemblers giving their most important features, advantages and disadvantages. We also make extentions to higher-level microprogramming languages and associated systems specifically developed for bit-slices. In the area of simulation facilities we first discuss the simulation objectives and the criteria for chosing the right simulation language. We consertrate to simulation facilities already used in bit-slices projects and discuss the gained experience. We conclude by describing the way the Signetics meta-microassembler and the ISPS simulation tool have been employed in the design of a fast microprogrammed machine, called MICE, made out of ECL bit-slices. (orig.)

  12. A microprocessor-based system for continuous monitoring of radiation levels around the CERN PS and PSB accelerators

    Science.gov (United States)

    Agoritsas, V.; Beck, F.; Benincasa, G. P.; Bovigny, J. P.

    1986-06-01

    This paper describes a new beam loss monitor system which has been installed in the PS and PSB machines, replacing an earlier system. The new system is controlled by a microprocessor which can operate independently of the accelerator control system, though setting up and central display are usually done remotely, using the standard control system facilities.

  13. Microprocessor-based system for continuous monitoring of radiation levels around the CERN PS and PSB accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Agoritsas, V.; Beck, F.; Benincasa, G.P.; Bovigny, J.P.

    1986-06-01

    This paper describes a new beam loss monitor system which has been installed in the PS and PSB machines, replacing an earlier system. The new system is controlled by a microprocessor which can operate independently of the accelerator control system, though setting up and central display are usually done remotely, using the standard control system facilities.

  14. Use of a microprocessor in the CAMAC standard. The dedicated microcomputer: JCAM-10

    International Nuclear Information System (INIS)

    Gallice, Pierre.

    1978-01-01

    The general purpose minicomputers and dedicated crate controllers currently used in small CAMAC systems are now being superseded by autonomous crate controllers with built-in microprocessor such as the JCAM-10, which is in fact a CAMAC dedicated microcomputer. This controller has been designed around the INTEL-8080 microprocessor and employs a semiconductor memory. The very much reduced price and smaller packaging of this module, and the relatively large potential market of CAMAC systems justify the tremendous efforts required for the study of its complete system as well in hardware than in software. After a short description of the CAMAC standard this paper will describe the principle of the microcomputer JCAM-10, and its complementary system: hardware (peripheral modules) and software (TTY command processor, Input Output, Control system, interrupt system, text editor, local macro-assembler, LP and BASICAM local compilers). As application examples, an autonomous counting system and a distributed intelligence system will be described [fr

  15. A microprocessor based mobile radiation survey system

    International Nuclear Information System (INIS)

    Gilbert, R.W.; McCormack, W.D.

    1984-01-01

    A microprocessor-based system has been designed and constructed to enhance the performance of routine radiation surveys on roads within the Hanford site. This device continually monitors system performance and output from four sodium iodide detectors mounted on the rear bumper of a 4-wheel drive truck. The gamma radiation count rate in counts-per-second is monitored, and a running average computed, with the results compared to predefined limits. If an abnormal instantaneous or average count rate is detected, an alarm is sounded with responsible data displayed on a liquid crystal panel in the cab of the vehicle. The system also has the capability to evaluate detector output using multiple time constants and to perform more complex tests and comparison of the data. Data can be archived for later analysis on conventional chart recorders or stored in digital form on magnetic tape or other digital storage media

  16. Microprocessor based mobile radiation survey system

    International Nuclear Information System (INIS)

    Gilbert, R.W.; McCormack, W.D.

    1983-12-01

    A microprocessor-based system has been designed and constructed to enhance the performance of routine radiation surveys on roads within the Hanford site. This device continually monitors system performance and output from four sodium iodide detectors mounted on the rear bumper of a 4-wheel drive truck. The gamma radiation count rate in counts-per-second is monitored, and a running average computed, with the results compared to predefined limits. If an abnormal instantaneous or average count rate is detected, an alarm is sounded with responsible data displayed on a liquid crystal panel in the cab of the vehicle. The system also has the capability to evaluate detector output using multiple time constants and to perform more complex tests and comparison of the data. Data can be archived for later analysis on conventional chart recorders or stored in digital form on magnetic tape or other digital storage media. 4 figures

  17. Microprocessor-based integrated LMFBR core surveillance

    International Nuclear Information System (INIS)

    Gmeiner, L.

    1984-06-01

    This report results from a joint study of KfK and INTERATOM. The aim of this study is to explore the advantages of microprocessors and microelectronics for a more sophisticated core surveillance, which is based on the integration of separate surveillance techniques. Due to new developments in microelectronics and related software an approach to LMFBR core surveillance can be conceived that combines a number of measurements into a more intelligent decision-making data processing system. The following techniques are considered to contribute essentially to an integrated core surveillance system: - subassembly state and thermal hydraulics performance monitoring, - temperature noise analysis, - acoustic core surveillance, - failure characterization and failure prediction based on DND- and cover gas signals, and - flux tilting techniques. Starting from a description of these techniques it is shown that by combination and correlation of these individual techniques a higher degree of cost-effectiveness, reliability and accuracy can be achieved. (orig./GL) [de

  18. Microprocessor system for temperature regulation and stabilization

    International Nuclear Information System (INIS)

    Nguyen Nhi Dien; Rodionov, K.G.

    1989-01-01

    Microprocessor based system for temperature regulation and stabilization of an operation external object is described. The system has the direct current amplifier working according to modulator-demodulator principle. The overal gain is 100, 1000, 2000. The maximum output signal is ±10 V. The power amplifier is a thyristor one and its line voltage is 220 V, 50 Hz. The output power is 0-2 kVA. The microcontroller has a remote display terminal. Data input is 8 and data output is one. Input and output voltage is ±(0-10) V. The preselection time for stabilization is within 1 s - 18 h. The program algorithm is given. 5 figs.; 1 tab

  19. Low cost design of microprocessor EDAC circuit

    International Nuclear Information System (INIS)

    Hao Li; Yu Lixin; Peng Heping; Zhuang Wei

    2015-01-01

    An optimization method of error detection and correction (EDAC) circuit design is proposed. The method involves selecting or constructing EDAC codes of low cost hardware, associated with operation scheduling implementation based on 2-input XOR gates structure, and two actions for reducing hardware cells, which can reduce the delay penalties and area costs of the EDAC circuit effectively. The 32-bit EDAC circuit hardware implementation is selected to make a prototype, based on the 180 nm process. The delay penalties and area costs of the EDAC circuit are evaluated. Results show that the time penalty and area cost of the EDAC circuitries are affected with different parity-check matrices and different hardware implementation for the EDAC codes with the same capability of correction and detection code. This method can be used as a guide for low-cost radiation-hardened microprocessor EDAC circuit design and for more advanced technologies. (paper)

  20. The engineering of microprocessor systems guidelines on system development

    CERN Document Server

    1979-01-01

    The Engineering of Microprocessor Systems: Guidelines on System Development provides economical and technical guidance for use when incorporating microprocessors in products or production processes and assesses the alternatives that are available. This volume is part of Project 0251 undertaken by The Electrical Research Association, which aims to give managers and development engineers advice and comment on the development process and the hardware and software needed to support the engineering of microprocessor systems. The results of Phase 1 of the five-phase project are contained in this fir

  1. A light-powered sub-threshold microprocessor

    Energy Technology Data Exchange (ETDEWEB)

    Liu Ming; Chen Hong; Zhang Chun; Li Changmeng; Wang Zhihua, E-mail: lium02@mails.tsinghua.edu.cn [Institute of Microelectronics, Tsinghua University, Beijing 100084 (China)

    2010-11-15

    This paper presents an 8-bit sub-threshold microprocessor which can be powered by an integrated photosensitive diode. With a custom designed sub-threshold standard cell library and 1 kbit sub-threshold SRAM design, the leakage power of 58 nW, dynamic power of 385 nW - 165 kHz, EDP 13 pJ/inst and the operating voltage of 350 mV are achieved. Under a light of about 150 kLux, the microprocessor can run at a rate of up to 500 kHz. The microprocessor can be used for wireless-sensor-network nodes.

  2. Leak detection system with distributed microprocessor in the primary containment vessel

    International Nuclear Information System (INIS)

    Inahara, K.; Yoshioka, K.; Tomizawa, T.

    1980-01-01

    Responding to the demand for greater improvements of the safety monitoring system, less public radiation exposure, and increase of plant availability, measuring and control systems in nuclear power plants have undergone many improvements. Leak detection systems are also required to give earlier warning, additional accuracy, and continuous monitoring function. This paper describes the drywell sump leakage detection system utilizing a distributed microprocessor, which is a successful application owing to its versatile function and ease of installation. The microprocessor performs various functions such as a rate of level change computation, conversion to leakage flow rate, initiation of alarm, and sump pump control. This system has already been applied to three operating BWR plants that demonstrate its efficiency. (auth)

  3. Design Example of Useful Memory Latency for Developing a Hazard Preventive Pipeline High-Performance Embedded-Microprocessor

    Directory of Open Access Journals (Sweden)

    Ching-Hwa Cheng

    2013-01-01

    Full Text Available The existence of structural, control, and data hazards presents a major challenge in designing an advanced pipeline/superscalar microprocessor. An efficient memory hierarchy cache-RAM-Disk design greatly enhances the microprocessor's performance. However, there are complex relationships among the memory hierarchy and the functional units in the microprocessor. Most past architectural design simulations focus on the instruction hazard detection/prevention scheme from the viewpoint of function units. This paper emphasizes that additional inboard memory can be well utilized to handle the hazardous conditions. When the instruction meets hazardous issues, the memory latency can be utilized to prevent performance degradation due to the hazard prevention mechanism. By using the proposed technique, a better architectural design can be rapidly validated by an FPGA at the start of the design stage. In this paper, the simulation results prove that our proposed methodology has a better performance and less power consumption compared to the conventional hazard prevention technique.

  4. Front-end data processing using the bit-sliced microprocessor

    International Nuclear Information System (INIS)

    Machen, D.R.

    1979-01-01

    A state-of-the-art computing device, based upon the high-speed bit-sliced microprocessor, was developed into hardware for front-end data processing in both control and experiment applications at the Los Alamos Scientific Laboratory. The CAMAC Instrumentation Standard provides the framework for the high-speed hardware, allowing data acquisition and processing to take place at the data source in a CAMAC crate. 5 figures

  5. INVESTIGATION OF MICROPROCESSOR CURRENT PROTECTION LINES WITH IMPROVED INDICES OF TECHNICAL PERFECTION

    Directory of Open Access Journals (Sweden)

    E. V. Buloichyk

    2014-01-01

    Full Text Available Technical perfection improvement of microprocessor current protection of distribution networks lines is provided by introduction of asymmetrical fault mode determination and fault location functions in the algorithm of its functioning. As a result of computing experiment the basic indices of the technical perfection of current protection have been obtained in the paper. The paper proves high efficiency of the proposed methods that ensure selective and proper operation in the different modes of the controlled line.

  6. Microprocessor protection devices: The present and the future

    Directory of Open Access Journals (Sweden)

    Gurevich Vladimir

    2008-01-01

    Full Text Available Paper presents the analysis of the basic constructive disadvantages of the present day microprocessor-based protective devices (MBR and offers the basic principles for creating a new MBR that can be used in newly constructed devices.

  7. A Fault-tolerant RISC Microprocessor for Spacecraft Applications

    Science.gov (United States)

    Timoc, Constantin; Benz, Harry

    1990-01-01

    Viewgraphs on a fault-tolerant RISC microprocessor for spacecraft applications are presented. Topics covered include: reduced instruction set computer; fault tolerant registers; fault tolerant ALU; and double rail CMOS logic.

  8. Evaluation of the performance of microprocessor-based colorimeter

    OpenAIRE

    Randhawa, S. S.; Gupta, R. C.; Bhandari, A. K.; Malhotra, P. S.

    1992-01-01

    Colorimetric estimations have an important role in quantitative studies. An inexpensive and portable microprocessor-based colorimeter developed by the authors is described in this paper. The colorimeter uses a light emitting diode as the light source; a pinphotodiode as the detector and an 8085A microprocessor. Blood urea, glucose, total protein, albumin and bilirubin from patient blood samples were analysed with the instrument and results obtained were compared with assays of the same blood ...

  9. An SEU rate prediction method for microprocessors of space applications

    International Nuclear Information System (INIS)

    Gao Jie; Li Qiang

    2012-01-01

    In this article,the relationship between static SEU (Single Event Upset) rate and dynamic SEU rate in microprocessors for satellites is studied by using process duty cycle concept and fault injection technique. The results are compared to in-orbit flight monitoring data. The results show that dynamic SEU rate by using process duty cycle can estimate in-orbit SEU rate of microprocessor reasonable; and the fault injection technique is a workable method to estimate SEU rate. (authors)

  10. Recent applications of microprocessor-based instruments in nuclear power stations

    International Nuclear Information System (INIS)

    Cash, N.R.; Dennis, U.E.

    1988-01-01

    The incorporation of microprocessors in the design of nuclear power plant instrumentation has led to levels of measurement and control not available previously. In addition to the expected expansion of functional (system) capability, numerous desirable features now are possible. The added ability to both self-calibrate and perform compensation algorithms has led to dramatic improvements in accuracies, response times, and noise rejection. Automated performance checking and self-testing simplify troubleshooting and required periodic surveillance. Alphanumeric displays allow both menu-driven operation and user-prompting, which, in turn, contribute to mistake avoidance. New features of these microprocessor-based instruments are of specific benefit in nuclear power reactors, were safety is of prime concern. Greater reliability and accuracy can be provided. Shortened calibration, surveillance, and repair times reduce the exposure to unnecessary challenges of the plant's protection systems that can arise from spurious noise signals

  11. A measurement of cosmic-ray LET-spectra using a microprocessor supported microscope

    International Nuclear Information System (INIS)

    Beer, J.; Heinrich, W.

    1982-01-01

    A microprocessor supported semi-automatic system for measurements of nuclear tracks in plastic detectors is presented. It consists of a microscope and a stepping motor driven stage. A Motorola microprocessor MC 6800 controls the measurement. It accepts the co-ordinates of the stage as well as the position of the focus and computes cone length and dip angle from the three-dimensional co-ordinates. LET-spectra were measured from two cellulose nitrate foils of the Biostack III experiment flown with the Apollo-Soyus-Test-Project in 1975. One of these foils was shielded by 3 g/cm 2 and the other one by 15 g/cm 2 . The two spectra show no statistically significant decrease of intensity. (author)

  12. Environmental qualification and functional issues for microprocessor-based reactor protection systems

    International Nuclear Information System (INIS)

    Korsah, K.; Kisner, R.; Wood, R.T.; Antonescu, C.

    1992-01-01

    Issues of obsolescence and lack of intrastructural support in (analog) spare parts, coupled with the potential benefits of digital systems, are driving the nuclear industry to retrofit analog instrumentation and control (I ampersand C) systems with digital and microprocessor-based systems. This movement away from analog can be expected to increase in advanced light-water reactors (ALWRs), which will make extensive use of fiber optic transmission, multiplexing techniques, and microprocessor-based technology. Although these technologies have several advantages and, in fact, have been in widespread use in the non-nuclear industry for several years, their application to safety-related systems in nuclear power plants raises key issues relating to the systems' environmental and functional reliability. For example, does the new hardware introduce additional system aging degradation mechanisms that could adversely impact the safety of the plant? Do the systems introduce the possibility of new and different malfunction scenarios or increase the probability of common-mode failures that could reduce the reliability of the safety system?. Are current environmental qualification standards adequate for microprocessor-based I ampersand C systems? Accordingly in 1991 the Nuclear Regulatory Commission (NRC) initiated the qualification of advanced Instrumentation and Control Systems program at ORNL to investigate issues that may arise with the use of advanced digital I ampersand C in ALWRs. The results of our studies to date are summarized in this paper

  13. Application of Microprocessor-Based Equipment in Nuclear Power Plants - Technical Basis for a Qualification Methodology

    International Nuclear Information System (INIS)

    Korsah, K.

    2001-01-01

    This document (1) summarizes the most significant findings of the ''Qualification of Advanced Instrumentation and Control (I and C) Systems'' program initiated by the Nuclear Regulatory Commission (NRC); (2) documents a comparative analysis of U.S. and European qualification standards; and (3) provides recommendations for enhancing regulatory guidance for environmental qualification of microprocessor-based safety-related systems. Safety-related I and C system upgrades of present-day nuclear power plants, as well as I and C systems of Advanced Light-Water Reactors (ALWRs), are expected to make increasing use of microprocessor-based technology. The Nuclear Regulatory Commission (NRC) recognized that the use of such technology may pose environmental qualification challenges different from current, analog-based I and C systems. Hence, it initiated the ''Qualification of Advanced Instrumentation and Control Systems'' program. The objectives of this confirmatory research project are to (1) identify any unique environmental-stress-related failure modes posed by digital technologies and their potential impact on the safety systems and (2) develop the technical basis for regulatory guidance using these findings. Previous findings from this study have been documented in several technical reports. This final report in the series documents a comparative analysis of two environmental qualification standards--Institute of Electrical and Electronics Engineers (IEEE) Std 323-1983 and International Electrotechnical Commission (IEC) 60780 (1998)--and provides recommendations for environmental qualification of microprocessor-based systems based on this analysis as well as on the findings documented in the previous reports. The two standards were chosen for this analysis because IEEE 323 is the standard used in the U.S. for the qualification of safety-related equipment in nuclear power plants, and IEC 60780 is its European counterpart. In addition, the IEC document was published in

  14. Trust versus confidence: Microprocessors and personnel monitoring

    International Nuclear Information System (INIS)

    Chiaro, P.J. Jr.

    1993-01-01

    Due to recent technological advances, substantial improvements have been made in personnel contamination monitoring. In all likelihood, these advances will close out the days of manually frisking personnel for radioactive contamination. Unfortunately, as microprocessor-based monitors become more widely used, not only at commercial power reactors but also at government facilities, questions concerning their trustworthiness arise. Algorithms make decisions that were previously made by technicians. Trust is placed not in technicians but in machines. In doing this it is assumed that the machine never misses. Inevitably, this trust drops, due largely to open-quotes false alarms.close quotes This is especially true when monitoring for alpha contamination. What is a open-quotes false alarm?close quotes Do these machines and their algorithms that we put our trust in make mistakes? An analysis was performed on half-body and hand-and-foot monitors at Oak Ridge National Laboratory (ORNL) in order to justify the suggested confidence level used for alarm point determination. Sources used in this analysis had activities approximating ORNL's contamination limits

  15. Trust versus confidence: Microprocessors and personnel monitoring

    International Nuclear Information System (INIS)

    Chiaro, P.J. Jr.

    1993-01-01

    Due to recent technological advances, substantial improvements have been made in personnel contamination monitoring. In all likelihood, these advances will close out the days of manually frisking personnel for radioactive contamination. Unfortunately, as microprocessor-based monitors become more widely used, not only at commercial power reactors but also at government facilities, questions concerning their trustworthiness arise. Algorithms make decisions that were previously made by technicians. Trust is placed not in technicians but in machines. In doing this it is assumed that the machine never misses. Inevitably, this trust drops, due largely to ''false alarms''. This is especially true when monitoring for alpha contamination. What is a ''false alarm''? Do these machines and their algorithms that we put our trust in make mistakes? An analysis was performed on half-body and hand-and-foot monitors at Oak Ridge National Laboratory (ORNL) in order to justify the suggested confidence level used for alarm point determination. Sources used in this analysis had activities approximating ORNL's contamination limits

  16. Trust versus confidence: Microprocessors and personnel monitoring

    International Nuclear Information System (INIS)

    Chiaro, P.J. Jr.

    1994-01-01

    Due to recent technological advances, substantial improvements have been made in personnel contamination monitoring. In all likelihood, these advances will close out the days of manually frisking personnel for radioactive contamination. Unfortunately, as microprocessor-based monitors become more widely used, not only at commercial power reactors but also at government facilities, questions concerning their trustworthiness arise. Algorithms make decisions that were previously made by technicians. Trust is placed not in technicians but in machines. In doing this it is assumed that the machine never misses. Inevitably, this trust drops, due largely to ''false alarms''. This is especially true when monitoring for alpha contamination. What is a ''false alarm''? Do these machines and their algorithms that they put their trust in make mistakes? An analysis was performed on half-body and hand-and-foot monitors at Oak Ridge National Laboratory (ORNL) in order to justify the suggested confidence level used for alarm point determination. Sources used in this analysis had activities approximating ORNL's contamination limits

  17. Randomized Controlled Trial of Teaching Methods: Do Classroom Experiments Improve Economic Education in High Schools?

    Science.gov (United States)

    Eisenkopf, Gerald; Sulser, Pascal A.

    2016-01-01

    The authors present results from a comprehensive field experiment at Swiss high schools in which they compare the effectiveness of teaching methods in economics. They randomly assigned classes into an experimental and a conventional teaching group, or a control group that received no specific instruction. Both teaching treatments improve economic…

  18. Teaching school children basic life support improves teaching and basic life support skills of medical students: A randomised, controlled trial.

    Science.gov (United States)

    Beck, Stefanie; Meier-Klages, Vivian; Michaelis, Maria; Sehner, Susanne; Harendza, Sigrid; Zöllner, Christian; Kubitz, Jens Christian

    2016-11-01

    The "kids save lives" joint-statement highlights the effectiveness of training all school children worldwide in cardiopulmonary resuscitation (CPR) to improve survival after cardiac arrest. The personnel requirement to implement this statement is high. Until now, no randomised controlled trial investigated if medical students benefit from their engagement in the BLS-education of school children regarding their later roles as physicians. The objective of the present study is to evaluate if medical students improve their teaching behaviour and CPR-skills by teaching school children in basic life support. The study is a randomised, single blind, controlled trial carried out with medical students during their final year. In total, 80 participants were allocated alternately to either the intervention or the control group. The intervention group participated in a CPR-instructor-course consisting of a 4h-preparatory seminar and a teaching-session in BLS for school children. The primary endpoints were effectiveness of teaching in an objective teaching examination and pass-rates in a simulated BLS-scenario. The 28 students who completed the CPR-instructor-course had significantly higher scores for effective teaching in five of eight dimensions and passed the BLS-assessment significantly more often than the 25 students of the control group (Odds Ratio (OR): 10.0; 95%-CI: 1.9-54.0; p=0.007). Active teaching of BLS improves teaching behaviour and resuscitation skills of students. Teaching school children in BLS may prepare medical students for their future role as a clinical teacher and support the implementation of the "kids save lives" statement on training all school children worldwide in BLS at the same time. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  19. A lightweight security scheme for wireless body area networks: design, energy evaluation and proposed microprocessor design.

    Science.gov (United States)

    Selimis, Georgios; Huang, Li; Massé, Fabien; Tsekoura, Ioanna; Ashouei, Maryam; Catthoor, Francky; Huisken, Jos; Stuyt, Jan; Dolmans, Guido; Penders, Julien; De Groot, Harmke

    2011-10-01

    In order for wireless body area networks to meet widespread adoption, a number of security implications must be explored to promote and maintain fundamental medical ethical principles and social expectations. As a result, integration of security functionality to sensor nodes is required. Integrating security functionality to a wireless sensor node increases the size of the stored software program in program memory, the required time that the sensor's microprocessor needs to process the data and the wireless network traffic which is exchanged among sensors. This security overhead has dominant impact on the energy dissipation which is strongly related to the lifetime of the sensor, a critical aspect in wireless sensor network (WSN) technology. Strict definition of the security functionality, complete hardware model (microprocessor and radio), WBAN topology and the structure of the medium access control (MAC) frame are required for an accurate estimation of the energy that security introduces into the WBAN. In this work, we define a lightweight security scheme for WBAN, we estimate the additional energy consumption that the security scheme introduces to WBAN based on commercial available off-the-shelf hardware components (microprocessor and radio), the network topology and the MAC frame. Furthermore, we propose a new microcontroller design in order to reduce the energy consumption of the system. Experimental results and comparisons with other works are given.

  20. The bit slice micro-processor 'GESPRO' as a project in the UA2 experiment

    CERN Document Server

    Becam, C; Delanghe, J; Fest, H M; Lecoq, J; Martin, H; Mencik, M; MerkeI, B; Meyer, J M; Perrin, M; Plothow, H; Rampazzo, J P; Schittly, A

    1981-01-01

    The bit slice micro-processor GESPRO is a CAMAC module plugged into a standard Elliot system crate via which it communicates as a slave with its host computer. It has full control of CAMAC as a master unit. GESPRO is a 24 bit machine with multi-mode memory addressing capacity of 64K words. The micro-processor structure uses 5 buses including pipe-line registers to mask access time and 16 interrupt levels. The micro-program memory capacity is 2K (RAM) words of 48 bits each. A special hardwired module allows floating point, as well as integer, multiplication of 24*24 bits, result in 48 bits, in about 200 ns. This micro-processor could be used in the UA2 data acquisition chain and trigger system for the following tasks: (a) online data reduction, i.e. to read DURANDAL, process the information resulting in accepting or rejecting the event; (b) readout and analysis of the accepted data; (c) preprocess the data. The UA2 version of GESPRO is under construction, programs and micro-programs are under development. Hard...

  1. The bit slice micro-processor 'GESPRO' as a project in the UA2 experiment

    International Nuclear Information System (INIS)

    Becam, C.; Bernaudin, P.; Delanghe, J.; Mencik, M.; Merkel, B.; Plothow, H.; Fest, H.M.; Lecoq, J.; Martin, H.; Meyer, J.M.

    1981-01-01

    The bit slice micro-processor GESPRO, as it is proposed for use in the UA 2 data acquisition chain and trigger system, is a CAMAC module plugged into a standard Elliott System crate via which it communicates as a slave with its host computer (ND, DEC). It has full control of CAMAC as a master unit. GESPRO is a 24 bit machine (150 ns effective cycle time) with multi-mode memory addressing capacity of 64 K words. The micro-processor structure uses 5 busses including pipe-line registers to mask access time and 16 interrupt levels. The micro-program memory capacity is 2 K (RAM) words of 48 bits each. A special hardwired module allows floating point (as well as integer) multiplication of 24 x 24 bits, result in 48 bits, in about 200 ns. This micro-processor could be used in the UA2 data acquisition chain and trigger system for the following tasks: a) online data reduction, i.e. to read DURANDAL (fast ADC's = the hardware trigger in the experiment), process the information (effective mass calculation, etc.) resulting in accepting or rejecting the event. b) read out and analysis of the accepted data (collect statistical information). c) preprocess the data (calculation of pointers, address decoding, etc.). The UA2 version of GESPRO is under construction, programs and micro-programs are under development. Hardware and software will be tested with simulated data. First results are expected in about one year from now. (orig.)

  2. Microprocessor Recruitment to Elongating RNA Polymerase II Is Required for Differential Expression of MicroRNAs

    Directory of Open Access Journals (Sweden)

    Victoria A. Church

    2017-09-01

    Full Text Available The cellular abundance of mature microRNAs (miRNAs is dictated by the efficiency of nuclear processing of primary miRNA transcripts (pri-miRNAs into pre-miRNA intermediates. The Microprocessor complex of Drosha and DGCR8 carries this out, but it has been unclear what controls Microprocessor’s differential processing of various pri-miRNAs. Here, we show that Drosophila DGCR8 (Pasha directly associates with the C-terminal domain of the RNA polymerase II elongation complex when it is phosphorylated by the Cdk9 kinase (pTEFb. When association is blocked by loss of Cdk9 activity, a global change in pri-miRNA processing is detected. Processing of pri-miRNAs with a UGU sequence motif in their apical junction domain increases, while processing of pri-miRNAs lacking this motif decreases. Therefore, phosphorylation of RNA polymerase II recruits Microprocessor for co-transcriptional processing of non-UGU pri-miRNAs that would otherwise be poorly processed. In contrast, UGU-positive pri-miRNAs are robustly processed by Microprocessor independent of RNA polymerase association.

  3. MicroShell Minimalist Shell for Xilinx Microprocessors

    Science.gov (United States)

    Werne, Thomas A.

    2011-01-01

    MicroShell is a lightweight shell environment for engineers and software developers working with embedded microprocessors in Xilinx FPGAs. (MicroShell has also been successfully ported to run on ARM Cortex-M1 microprocessors in Actel ProASIC3 FPGAs, but without project-integration support.) Micro Shell decreases the time spent performing initial tests of field-programmable gate array (FPGA) designs, simplifies running customizable one-time-only experiments, and provides a familiar-feeling command-line interface. The program comes with a collection of useful functions and enables the designer to add an unlimited number of custom commands, which are callable from the command-line. The commands are parameterizable (using the C-based command-line parameter idiom), so the designer can use one function to exercise hardware with different values. Also, since many hardware peripherals instantiated in FPGAs have reasonably simple register-mapped I/O interfaces, the engineer can edit and view hardware parameter settings at any time without stopping the processor. MicroShell comes with a set of support scripts that interface seamlessly with Xilinx's EDK tool. Adding an instance of MicroShell to a project is as simple as marking a check box in a library configuration dialog box and specifying a software project directory. The support scripts then examine the hardware design, build design-specific functions, conditionally include processor-specific functions, and complete the compilation process. For code-size constrained designs, most of the stock functionality can be excluded from the compiled library. When all of the configurable options are removed from the binary, MicroShell has an unoptimized memory footprint of about 4.8 kB and a size-optimized footprint of about 2.3 kB. Since MicroShell allows unfettered access to all processor-accessible memory locations, it is possible to perform live patching on a running system. This can be useful, for instance, if a bug is

  4. GPS/MEMS IMU/Microprocessor Board for Navigation

    Science.gov (United States)

    Gender, Thomas K.; Chow, James; Ott, William E.

    2009-01-01

    A miniaturized instrumentation package comprising a (1) Global Positioning System (GPS) receiver, (2) an inertial measurement unit (IMU) consisting largely of surface-micromachined sensors of the microelectromechanical systems (MEMS) type, and (3) a microprocessor, all residing on a single circuit board, is part of the navigation system of a compact robotic spacecraft intended to be released from a larger spacecraft [e.g., the International Space Station (ISS)] for exterior visual inspection of the larger spacecraft. Variants of the package may also be useful in terrestrial collision-detection and -avoidance applications. The navigation solution obtained by integrating the IMU outputs is fed back to a correlator in the GPS receiver to aid in tracking GPS signals. The raw GPS and IMU data are blended in a Kalman filter to obtain an optimal navigation solution, which can be supplemented by range and velocity data obtained by use of (l) a stereoscopic pair of electronic cameras aboard the robotic spacecraft and/or (2) a laser dynamic range imager aboard the ISS. The novelty of the package lies mostly in those aspects of the design of the MEMS IMU that pertain to controlling mechanical resonances and stabilizing scale factors and biases.

  5. Single event effect testing of the Intel 80386 family and the 80486 microprocessor

    International Nuclear Information System (INIS)

    Moran, A.; LaBel, K.; Gates, M.; Seidleck, C.; McGraw, R.; Broida, M.; Firer, J.; Sprehn, S.

    1996-01-01

    The authors present single event effect test results for the Intel 80386 microprocessor, the 80387 coprocessor, the 82380 peripheral device, and on the 80486 microprocessor. Both single event upset and latchup conditions were monitored

  6. Microprocessor isotope gauges for measurement of coating thickness and of air dust pollution

    International Nuclear Information System (INIS)

    Machaj, B.; Zrudelny, F.; Sikora, A.; Jaszczuk, J.

    1986-01-01

    The article describes a coating thickness gauge based on measurement of backscattered beta particles, and an air dust pollution gauge based on measurement of dust deposited from known volume of ambient air passed through a filter, by attenuation of beta radiation. In both cases to control the gauges and to process head signals microcomputer system based on Intel 8080 microprocessor is employed. Algorithms for processing and control of the gauges and corresponding flow charts are presented. Block diagram of microcomputer system used is presented, as well as the manner of operation of the gauges. (author)

  7. Cross software for microprocessor program development at CERN

    International Nuclear Information System (INIS)

    Eicken, H. von; Montuelle, J.; Willers, I.; Blake, J.

    1981-01-01

    Programs for a variety of microprocessors (including Intel 8080; Motorola 6800 and 6809 and 68000; and Texas Instruments 9900) can be prepared on different host computers (such as IBM 370, CDC 6000, and Nord 10) using portable programs developed at CERN. The range of cross software consists of: an assembler for each target microprocessor, a single linkage editor, a single object module librarian, and a variety of pre-loaders which convert object modules from CERN's format (CUFOM) into manufacturers' formats. The programs are written in BCPL and PASCAL, programming languages which are available on a wide range of computers. (orig.)

  8. Evaluation of the performance of microprocessor-based colorimeter.

    Science.gov (United States)

    Randhawa, S S; Gupta, R C; Bhandari, A K; Malhotra, P S

    1992-01-01

    Colorimetric estimations have an important role in quantitative studies. An inexpensive and portable microprocessor-based colorimeter developed by the authors is described in this paper. The colorimeter uses a light emitting diode as the light source; a pinphotodiode as the detector and an 8085A microprocessor. Blood urea, glucose, total protein, albumin and bilirubin from patient blood samples were analysed with the instrument and results obtained were compared with assays of the same blood using a Spectronic 21. A good correlation was found between the results from the two instruments.

  9. Architecture of 32 bit CISC (Complex Instruction Set Computer) microprocessors

    International Nuclear Information System (INIS)

    Jove, T.M.; Ayguade, E.; Valero, M.

    1988-01-01

    In this paper we describe the main topics about the architecture of the best known 32-bit CISC microprocessors; i80386, MC68000 family, NS32000 series and Z80000. We focus on the high level languages support, operating system design facilities, memory management, techniques to speed up the overall performance and program debugging facilities. (Author)

  10. Small private key MQPKS on an embedded microprocessor.

    Science.gov (United States)

    Seo, Hwajeong; Kim, Jihyun; Choi, Jongseok; Park, Taehwan; Liu, Zhe; Kim, Howon

    2014-03-19

    Multivariate quadratic (MQ) cryptography requires the use of long public and private keys to ensure a sufficient security level, but this is not favorable to embedded systems, which have limited system resources. Recently, various approaches to MQ cryptography using reduced public keys have been studied. As a result of this, at CHES2011 (Cryptographic Hardware and Embedded Systems, 2011), a small public key MQ scheme, was proposed, and its feasible implementation on an embedded microprocessor was reported at CHES2012. However, the implementation of a small private key MQ scheme was not reported. For efficient implementation, random number generators can contribute to reduce the key size, but the cost of using a random number generator is much more complex than computing MQ on modern microprocessors. Therefore, no feasible results have been reported on embedded microprocessors. In this paper, we propose a feasible implementation on embedded microprocessors for a small private key MQ scheme using a pseudo-random number generator and hash function based on a block-cipher exploiting a hardware Advanced Encryption Standard (AES) accelerator. To speed up the performance, we apply various implementation methods, including parallel computation, on-the-fly computation, optimized logarithm representation, vinegar monomials and assembly programming. The proposed method reduces the private key size by about 99.9% and boosts signature generation and verification by 5.78% and 12.19% than previous results in CHES2012.

  11. Small Private Key MQPKS on an Embedded Microprocessor

    Directory of Open Access Journals (Sweden)

    Hwajeong Seo

    2014-03-01

    Full Text Available Multivariate quadratic (MQ cryptography requires the use of long public and private keys to ensure a sufficient security level, but this is not favorable to embedded systems, which have limited system resources. Recently, various approaches to MQ cryptography using reduced public keys have been studied. As a result of this, at CHES2011 (Cryptographic Hardware and Embedded Systems, 2011, a small public key MQ scheme, was proposed, and its feasible implementation on an embedded microprocessor was reported at CHES2012. However, the implementation of a small private key MQ scheme was not reported. For efficient implementation, random number generators can contribute to reduce the key size, but the cost of using a random number generator is much more complex than computing MQ on modern microprocessors. Therefore, no feasible results have been reported on embedded microprocessors. In this paper, we propose a feasible implementation on embedded microprocessors for a small private key MQ scheme using a pseudo-random number generator and hash function based on a block-cipher exploiting a hardware Advanced Encryption Standard (AES accelerator. To speed up the performance, we apply various implementation methods, including parallel computation, on-the-fly computation, optimized logarithm representation, vinegar monomials and assembly programming. The proposed method reduces the private key size by about 99.9% and boosts signature generation and verification by 5.78% and 12.19% than previous results in CHES2012.

  12. Small Private Key PKS on an Embedded Microprocessor

    Science.gov (United States)

    Seo, Hwajeong; Kim, Jihyun; Choi, Jongseok; Park, Taehwan; Liu, Zhe; Kim, Howon

    2014-01-01

    Multivariate quadratic ( ) cryptography requires the use of long public and private keys to ensure a sufficient security level, but this is not favorable to embedded systems, which have limited system resources. Recently, various approaches to cryptography using reduced public keys have been studied. As a result of this, at CHES2011 (Cryptographic Hardware and Embedded Systems, 2011), a small public key scheme, was proposed, and its feasible implementation on an embedded microprocessor was reported at CHES2012. However, the implementation of a small private key scheme was not reported. For efficient implementation, random number generators can contribute to reduce the key size, but the cost of using a random number generator is much more complex than computing on modern microprocessors. Therefore, no feasible results have been reported on embedded microprocessors. In this paper, we propose a feasible implementation on embedded microprocessors for a small private key scheme using a pseudo-random number generator and hash function based on a block-cipher exploiting a hardware Advanced Encryption Standard (AES) accelerator. To speed up the performance, we apply various implementation methods, including parallel computation, on-the-fly computation, optimized logarithm representation, vinegar monomials and assembly programming. The proposed method reduces the private key size by about 99.9% and boosts signature generation and verification by 5.78% and 12.19% than previous results in CHES2012. PMID:24651722

  13. Use of a microprocessor in a remote working level monitor

    International Nuclear Information System (INIS)

    Keffe, D.J.; McDowell, W.P.; Groer, P.G.

    1975-01-01

    A remote working level monitor was designed to measure short-lived radon-daughter concentrations in sealed chambers having potentially high radiation levels (up to 2000 WL). The system is comprised of surface barrier detectors, multiplexer and buffers, microprocessor and teletype

  14. A microprocessor based multiscaling data acquisition system for moessbauer spectroscopy

    International Nuclear Information System (INIS)

    Bohm, C.; Ekdahl, T.

    1985-01-01

    A microprocessor based data acquisition system is described, which was developed for use in Moessbauer spectroscopy. It is designed to record two spectra simultaneously, one of which could be a calibration spectrum. It is autonomous, but uses a host computer for initialization and permanent storage of data. The host communication software is also described. (Author)

  15. Microprocessor-based data acquisition system for extensive air shower studies

    International Nuclear Information System (INIS)

    Mazumdar, G.K.D.; Kalita, P.M.; Bordoloi, T.C.; Pathak, K.M.

    1989-01-01

    Studies on electromagnetic radiation from large extensive air showers (Esub(p) ≥> 10 16 eV) have been of recent importance in the investigation of properties of EAS in problems involving mass composition, arrival time, radio emission. Cerenkov radiation etc. Such studies need fast electronic circuitry preferably for digitisation. A microprocessor based data acquisition system having scintillation counters, PA, MA, Pd, S/H and control unit has been developed and is being used in the EAS studies at Gauhati University Cosmic Ray Research Laboratory. Description of the different units along with their functioning and method of standardisation is presented in this paper. (author). 3 figs

  16. A Pilot-Scale Heat Recovery System for Computer Process Control Teaching and Research.

    Science.gov (United States)

    Callaghan, P. J.; And Others

    1988-01-01

    Describes the experimental system and equipment including an interface box for displaying variables. Discusses features which make the circuit suitable for teaching and research in computing. Feedforward, decoupling, and adaptive control, examination of digital filtering, and a cascade loop are teaching experiments utilizing this rig. Diagrams and…

  17. The Different Faces of Controlling Teaching: Implications of a Distinction between Externally and Internally Controlling Teaching for Students' Motivation in Physical Education

    Science.gov (United States)

    De Meyer, Jotie; Soenens, Bart; Aelterman, Nathalie; De Bourdeaudhuij, Ilse; Haerens, Leen

    2016-01-01

    Background: In Self-Determination Theory (SDT), a well-validated macro-theory on human motivation, a distinction is made between internally controlling teaching practices (e.g. guilt-induction and shaming) and externally controlling practices (e.g. threats and punishments, commands). While both practices are said to undermine students' motivation,…

  18. Use of a Microprocessor to Implement an ADCCP Protocol (Federal Std-1003) Operating in the Unbalanced Normal Mode.

    Science.gov (United States)

    1980-05-01

    andcoptrpormigfrteublne nra ls fpoeue nacrac with Federal Standard 1003 fTelecommunications: Synchronous Bit Oriented Data Link Control Procedures...and the higher level user. The solution to the producer/consumer problem involves the use of PASS and SICHAL primitives and event variables or... semaphores . The event variables have been defined for the LS-microprocessor interface as part of I-1 the internal registers that are included in the F6856

  19. Teaching Tool for a Control Systems Laboratory Using a Quadrotor as a Plant in MATLAB

    Science.gov (United States)

    Khan, Subhan; Jaffery, Mujtaba Hussain; Hanif, Athar; Asif, Muhammad Rizwan

    2017-01-01

    This paper presents a MATLAB-based application to teach the guidance, navigation, and control concepts of a quadrotor to undergraduate students, using a graphical user interface (GUI) and 3-D animations. The Simulink quadrotor model is controlled by a proportional integral derivative controller and a linear quadratic regulator controller. The GUI…

  20. Real-time fetal ECG system design using embedded microprocessors

    Science.gov (United States)

    Meyer-Baese, Uwe; Muddu, Harikrishna; Schinhaerl, Sebastian; Kumm, Martin; Zipf, Peter

    2016-05-01

    The emphasis of this project lies in the development and evaluation of new robust and high fidelity fetal electrocardiogram (FECG) systems to determine the fetal heart rate (FHR). Recently several powerful algorithms have been suggested to improve the FECG fidelity. Until now it is unknown if these algorithms allow a real-time processing, can be used in mobile systems (low power), and which algorithm produces the best error rate for a given system configuration. In this work we have developed high performance, low power microprocessor-based biomedical systems that allow a fair comparison of proposed, state-of-the-art FECG algorithms. We will evaluate different soft-core microprocessors and compare these solutions to other commercial off-the-shelf (COTS) hardcore solutions in terms of price, size, power, and speed.

  1. Design and Implementation of O/C relay using Microprocessor

    Directory of Open Access Journals (Sweden)

    Dr.Abdul-Sattar H. Jasim

    2012-03-01

    Full Text Available This work presents the design and implementation of a versatile digital overcurrent (O/C relay using a single microprocessor. The relay is implemented by a combination of a look-up table and a counter. The software development and hardware testing are done using a microcomputer module based on a 8-bit microprocessor. The digital processing of measured currents enables a separate setting of operating values selection of all types of inverse or constant time characteristics overcurrent protection. This protection provides reasonably fast tripping, even at terminal close to the power source were the most serve faults can occur excluding the transient condition. So this method has an excellent compromise between accuracy hardware and speed

  2. Fermilab advanced computer program multi-microprocessor project

    International Nuclear Information System (INIS)

    Nash, T.; Areti, H.; Biel, J.

    1985-06-01

    Fermilab's Advanced Computer Program is constructing a powerful 128 node multi-microprocessor system for data analysis in high-energy physics. The system will use commercial 32-bit microprocessors programmed in Fortran-77. Extensive software supports easy migration of user applications from a uniprocessor environment to the multiprocessor and provides sophisticated program development, debugging, and error handling and recovery tools. This system is designed to be readily copied, providing computing cost effectiveness of below $2200 per VAX 11/780 equivalent. The low cost, commercial availability, compatibility with off-line analysis programs, and high data bandwidths (up to 160 MByte/sec) make the system an ideal choice for applications to on-line triggers as well as an offline data processor

  3. Microprocessor event analysis in parallel with Camac data acquisition

    International Nuclear Information System (INIS)

    Cords, D.; Eichler, R.; Riege, H.

    1981-01-01

    The Plessey MIPROC-16 microprocessor (16 bits, 250 ns execution time) has been connected to a Camac System (GEC-ELLIOTT System Crate) and shares the Camac access with a Nord-1OS computer. Interfaces have been designed and tested for execution of Camac cycles, communication with the Nord-1OS computer and DMA-transfer from Camac to the MIPROC-16 memory. The system is used in the JADE data-acquisition-system at PETRA where it receives the data from the detector in parallel with the Nord-1OS computer via DMA through the indirect-data-channel mode. The microprocessor performs an on-line analysis of events and the result of various checks is appended to the event. In case of spurious triggers or clear beam gas events, the Nord-1OS buffer will be reset and the event omitted from further processing. (orig.)

  4. Microprocessor event analysis in parallel with CAMAC data acquisition

    CERN Document Server

    Cords, D; Riege, H

    1981-01-01

    The Plessey MIPROC-16 microprocessor (16 bits, 250 ns execution time) has been connected to a CAMAC System (GEC-ELLIOTT System Crate) and shares the CAMAC access with a Nord-10S computer. Interfaces have been designed and tested for execution of CAMAC cycles, communication with the Nord-10S computer and DMA-transfer from CAMAC to the MIPROC-16 memory. The system is used in the JADE data-acquisition-system at PETRA where it receives the data from the detector in parallel with the Nord-10S computer via DMA through the indirect-data-channel mode. The microprocessor performs an on-line analysis of events and the results of various checks is appended to the event. In case of spurious triggers or clear beam gas events, the Nord-10S buffer will be reset and the event omitted from further processing. (5 refs).

  5. Teaching Effectiveness, Impression Management, and Dysfunctional Behavior: Student Evaluation of Teaching Control Data

    Science.gov (United States)

    Crumbley, D. Larry; Reichelt, Kenneth J.

    2009-01-01

    Purpose: Student evaluation of teaching (SET) questionnaires are used in many countries, although much current research questions the validity of these surveys. US research indicates that more than 90 percent of academic accounting departments use this performance measurement. This paper aims to focus on the validity of SET data.…

  6. Management Consulting and Teaching: Lessons Learned Teaching Professionals to Control Tone in Writing

    Science.gov (United States)

    Jameson, Daphne A.

    2009-01-01

    In working with business executives, engineers, and government officials to improve their writing, the author learned that it is much easier to teach clarity than tone. To achieve clarity, writers can follow concrete action steps: (1) organize the ideas; (2) write previews and summaries; (3) insert substantive headings; (4) use active verbs; and…

  7. Outcomes of Video-Assisted Teaching for Latching in Postpartum Women: A Randomized Controlled Trial.

    Science.gov (United States)

    Sroiwatana, Suttikamon; Puapornpong, Pawin

    2018-04-25

    Latching is an important process of breastfeeding and should be taught and practiced by the postpartum mother. The objective is to compare latching outcomes between video-assisted and routine teaching methods among postpartum women. A randomized controlled trial was conducted. Postpartum women who had deliveries without complications were randomized into two groups: 14 cases in the video-assisted teaching group and 14 cases in a routine teaching group. In the first group, the mothers were taught breastfeeding benefits, latching methods, and breastfeeding positions and practiced breastfeeding in a controlled setting for a 30-minute period and watched a 6-minute video with consistent content. In the second group, the mothers were taught a normal 30-minute period and then practiced breastfeeding. In both groups, Latching on, Audible swallowing, the Type of nipples, Comfort, and Help (LATCH) scores were assessed at 24-32 and 48-56 hours after the breastfeeding teaching modals. Demographic data and LATCH scores were collected and analyzed. There were no statistically significant differences in the mothers' ages, occupations, marital status, religion, education, income, infants' gestational age, body mass index, nipple length, route of delivery, and time to first latching between the video-assisted and routine breastfeeding teaching groups. First and second LATCH score assessments had shown no significant differences between both breastfeeding teaching groups. The video-assisted breastfeeding teaching did not improve latching outcomes when it was compared with routine teaching.

  8. Small Private Key PKS on an Embedded Microprocessor

    OpenAIRE

    Seo, Hwajeong; Kim, Jihyun; Choi, Jongseok; Park, Taehwan; Liu, Zhe; Kim, Howon

    2014-01-01

    Multivariate quadratic (MQ) cryptography requires the use of long public and private keys to ensure a sufficient security level, but this is not favorable to embedded systems, which have limited system resources. Recently, various approaches to MQ cryptography using reduced public keys have been studied. As a result of this, at CHES2011 (Cryptographic Hardware and Embedded Systems, 2011), a small public key MQ scheme, was proposed, and its feasible implementation on an embedded microprocessor...

  9. Radiation-hardened bulk Si-gate CMOS microprocessor family

    International Nuclear Information System (INIS)

    Stricker, R.E.; Dingwall, A.G.F.; Cohen, S.; Adams, J.R.; Slemmer, W.C.

    1979-01-01

    RCA and Sandia Laboratories jointly developed a radiation-hardened bulk Si-gate CMOS technology which is used to fabricate the CDP-1800 series microprocessor family. Total dose hardness of 1 x 10 6 rads (Si) and transient upset hardness of 5 x 10 8 rads (Si)/sec with no latch up at any transient level was achieved. Radiation-hardened parts manufactured to date include the CDP-1802 microprocessor, the CDP-1834 ROM, the CDP-1852 8-bit I/O port, the CDP-1856 N-bit 1 of 8 decoder, and the TCC-244 256 x 4 Static RAM. The paper is divided into three parts. In the first section, the basic fundamentals of the non-hardened C 2 L technology used for the CDP-1800 series microprocessor parts is discussed along with the primary reasons for hardening this technology. The second section discusses the major changes in the fabrication sequence that are required to produce radiation-hardened devices. The final section details the electrical performance characteristics of the hardened devices as well as the effects of radiation on device performance. Also included in this section is a discussion of the TCC-244 256 x 4 Static RAM designed jointly by RCA and Sandia Laboratories for this application

  10. Portable regional cerebral blood flow system based on IBM PC/AT and microprocessor electronics

    International Nuclear Information System (INIS)

    Mun, S.K.; Mun, I.K.; Petite, J.; Cohan, S.L.; Fahey, F.H.

    1986-01-01

    A portable 16-channel reginal cerebral blood flow (rCBF) measuring system has been developed using an IBM PC/AT and new microelectronics to improve processing speed and portability. The detector electronics were developed by Scan Detectronics A/S of Denmark. The counter module contains 18 16-bit counters, each programmable in four different modes. The rate meter has three independent microprocessor controllers for rate meter functions, window controller, and channel controller. The detector electronics and detection parameters can be fully controlled by the host PC/AT. The menu-driven system (Better Basic) assists the operator at each step. The collected data from 16 channels can be processed automatically or postprocessed using more flexible and sophisticated techniques within 20 minutes. The headgear holding 16 sodium iodide detectors is fabricated by modifying a motorcycle helmet

  11. Church heating systems demand competence and accuracy. Microprocessor-controlled underfloor heating saves inventory stock and budget. Verlangen Kompetenz und Akribie: Kirchenheizungen. Mikroprozessorgesteuerte Unterflur-Heizung schont Inventar und Budget

    Energy Technology Data Exchange (ETDEWEB)

    Ensink, H

    1994-05-01

    Church heating systems are heating systems for old building types (churches, festival halls in castles, assembly halls) which make special demands on planning and execution. This paper describes an underfloor church heating. In this connection the subjects space temperature, heat requirement calculation, heat generator, heat distribution, automatic control, heat build-up and cool-down ramp, time switch, ventilator stage and temperature selection are dealt with. (BWI)

  12. Teaching Self-Control Procedures to Learning Disabled Youths.

    Science.gov (United States)

    Foster, Carol; And Others

    The study involving two learning disabled (LD) seventh graders was designed to develop and evaluate a self instructional booklet that teaches adolescents to change their behaviors with minimal intervention from other individuals. The first part of the study examined whether LD Ss could learn the principles of self monitoring, goal establishment,…

  13. A microarchitecture for resource-limited superscalar microprocessors

    Science.gov (United States)

    Basso, Todd David

    1999-11-01

    Microelectronic components in space and satellite systems must be resistant to total dose radiation, single-even upset, and latchup in order to accomplish their missions. The demand for inexpensive, high-volume, radiation hardened (rad-hard) integrated circuits (ICs) is expected to increase dramatically as the communication market continues to expand. Motorola's Complementary Gallium Arsenide (CGaAsTM) technology offers superior radiation tolerance compared to traditional CMOS processes, while being more economical than dedicated rad-hard CMOS processes. The goals of this dissertation are to optimize a superscalar microarchitecture suitable for CGaAsTM microprocessors, develop circuit techniques for such applications, and evaluate the potential of CGaAsTM for the development of digital VLSI circuits. Motorola's 0.5 mum CGaAsTM process is summarized and circuit techniques applicable to digital CGaAsTM are developed. Direct coupled FET, complementary, and domino logic circuits are compared based on speed, power, area, and noise margins. These circuit techniques are employed in the design of a 600 MHz PowerPCTM arithmetic logic unit. The dissertation emphasizes CGaASTM-specific design considerations, specifically, low integration level. A baseline superscalar microarchitecture is defined and SPEC95 integer benchmark simulations are used to evaluate the applicability of advanced architectural features to microprocessors having low integration levels. The performance simulations center around the optimization of a simple superscalar core, small-scale branch prediction, instruction prefetching, and an off-chip primary data cache. The simulation results are used to develop a superscalar microarchitecture capable of outperforming a comparable sequential pipeline, while using only 500,000 transistors. The architecture, running at 200 MHz, is capable of achieving an estimated 153 MIPS, translating to a 27% performance increase over a comparable traditional pipelined

  14. Thermal treatment system of hazardous residuals in three heating zones based on a microprocessor

    International Nuclear Information System (INIS)

    Luna H, C.L.

    1997-01-01

    Thermal treatment system consists of a high power electric oven of three heating zones where each zone works up to 1200 Centigrades; it has the capacity of rising the central zone temperature up to 1000 Centigrades in 58 minutes approximately. This configuration of three zones could be programmed to different temperatures and they will be digitally controlled by a control microprocessor, which has been controlled by its own assembler language, in function of the PID control. There are also other important controls based on this microprocessor, as a signal amplification, starting and shutdown of high power step relays, activation and deactivation of both analogic/digital and digital/analogic convertors, port activation and basic data storage of the system. Two main characteristics were looked for this oven design; the first was the possibility of controlling the three zone temperature and the second was to reduce the rising and stabilization operation time and its digitized control. The principal function of the three zone oven is to accelerate the degradation of hazardous residuals by an oxidation instead combustion, through relatively high temperatures (minimum 800 Centigrades and maximum 1200 Centigrades); this process reduces the ash and volatile particulate production. The hazardous residuals will be pumped into the degradation system and after atomized through a packaged column; this step will avoid the direct contact of the residuals with the oven cores. These features make this system as closed process, which means that the residuals can not leak to the working area, reducing the exposure risk to the personnel. This three step oven system is the first stage of the complete hazardous residuals degradation system; after this, the flow will go into a cold plasma region where the process is completed, making a closed system. (Author)

  15. Development of Control Teaching Material for Mechatronics Education Based on Experience

    Science.gov (United States)

    Tasaki, Takao; Watanabe, Shinichi; Shikanai, Yoshihito; Ozaki, Koichi

    In this paper, we have developed a teaching material for technical high school students to understand the control technique. The material makes the students understanding the control technique through the sensibility obtained from the experience of riding the robot. We have considered the correspondence of the teaching material with the ARCS Model. Therefore, the material aims to improve the interest and the willingness to learn mechatronics and control technique by experiencing the difference of the response by the change in the control parameters. As the results of the questionnaire to the technical high school students in the class, we have verified educative effect of the teaching material which can be improved willingness of learning and interesting for mechatronics and control technique.

  16. The Application of Linear and Nonlinear Water Tanks Case Study in Teaching of Process Control

    Science.gov (United States)

    Li, Xiangshun; Li, Zhiang

    2018-02-01

    In the traditional process control teaching, the importance of passing knowledge is emphasized while the development of creative and practical abilities of students is ignored. Traditional teaching methods are not very helpful to breed a good engineer. Case teaching is a very useful way to improve students’ innovative and practical abilities. In the traditional case teaching, knowledge points are taught separately based on different examples or no examples, thus it is very hard to setup the whole knowledge structure. Though all the knowledge is learned, how to use the knowledge to solve engineering problems keeps challenging for students. In this paper, the linear and nonlinear tanks are taken as illustrative examples which involves several knowledge points of process control. The application method of each knowledge point is discussed in detail and simulated. I believe the case-based study will be helpful for students.

  17. Introduction to 6800/6802 microprocessor systems hardware, software and experimentation

    CERN Document Server

    Simpson, Robert J

    1987-01-01

    Introduction to 6800/6802 Microprocessor Systems: Hardware, Software and Experimentation introduces the reader to the features, characteristics, operation, and applications of the 6800/6802 microprocessor and associated family of devices. Many worked examples are included to illustrate the theoretical and practical aspects of the 6800/6802 microprocessor.Comprised of six chapters, this book begins by presenting several aspects of digital systems before introducing the concepts of fetching and execution of a microprocessor instruction. Details and descriptions of hardware elements (MPU, RAM, RO

  18. Locus of Control as It Relates to the Teaching Style of Elementary Teachers

    Science.gov (United States)

    Ture, Abidemi

    2013-01-01

    This research explored the relationship between elementary teachers' locus of control and teaching style. This research observed elementary teachers in their classrooms coupled with data gathered from information sheets, surveys, and interviews to determine if a relationship exists between the locus of control of the elementary teachers and…

  19. Unified microprocessor CAMAC module for preliminary data processing

    International Nuclear Information System (INIS)

    Zaushitsin, V.L.; Kulik, O.V.; Repin, V.M.

    1984-01-01

    The UP-80 unified active module is described. It is made in the CAMAC standard on the base of the K580IK80 microprocessor allowing to increase the rate of large-volume experimental spectroscopic data processing by an order. Loading of 5 different programs for data processing is possible. Data from the operative storage with 1K capacity (8 bits) are recorded and read out trhough the CAMAC line (the regime of unit exchange is possible) or through the joint of the external line

  20. A fastbus master based on a risc microprocessor

    International Nuclear Information System (INIS)

    Cerrito, L.; Chorowicz, V.; Lebbolo, H.; Vallereau, A.

    1990-01-01

    SISIFUS is a general purpose Fastbus Master and Slave able to perform any operation on both Fastbus segments. Master operations are directed either by the processor or by two fast sequencers. A Block Mover function is implemented allowing direct data block transfers between two Slaves. SISIFUS uses the AM 29000 RISC microprocessor which can execute every assembler instruction in 40ns. The on-board monitor/debugger allows programs to be written in assembler from a terminal connected to the module or written in C and cross compiled on a host computer (PC)

  1. Microprocessor-assisted calibration for a remote working level monitor

    International Nuclear Information System (INIS)

    McDowell, W.P.; Keefe, D.J.; Groer, P.G.; Witek, R.T.

    1977-01-01

    A method is described for calibrating a Remote Working Level Monitor, an instrument which measures Working Level and Rn-daughter concentrations in the atmosphere. The method makes use of a microprocessor to calculate beta efficiencies for RaB and RaC from the counts accumulated in the RaA, Ra(B + C) and RaC' channels of the instrument. Both the alpha spectroscopic and total-alpha methods are used to determine the Rn-daughter concentrations. These methods require the processor to solve systems of linear equations with several unknowns. No assumptions about Rn-daughter equilibrium are made

  2. Microprocessor-assisted calibration for a remote working level monitor

    International Nuclear Information System (INIS)

    McDowell, W.P.; Keefe, D.J.; Groer, P.G.; Witek, R.T.

    1976-01-01

    A method is described for calibrating a Remote Working Level Monitor, an instrument which measures Working Level and Rn-daughter concentrations in the atmosphere. The method makes use of a microprocessor to calculate beta efficiencies for RaB and RaC from the counts accumulated in the RaA, Ra(B + C) and RaC' channels of the instrument. Both the alpha spectroscopic and total-alpha methods are used to determine the Rn-daughter concentrations. These methods require the processor to solve systems of linear equations with several unknowns. No assumptions about Rn-daughter equilibrium are made

  3. Microprocessor based beam loss monitor system for the AGS

    International Nuclear Information System (INIS)

    Witkover, R.L.

    1979-01-01

    An array of 120 long radiation monitors (LRM) have been installed around the AGS. Each monitor is an extended coaxial ion chamber, 5 meters long, made from hollow core coaxial transmission cable pressured with argon. The LRM's are each connected to a low current preamplifier and voltage-to-frequency converter (VFC). The digital output of each channel is fed to a 16 bit counter chip which bridges the bus of an 8085 microprocessor. This circuit is connected to the AGS PD-10 for data taking or may function as a stand-alone unit. Various operating modes can be selected for data readout. System design and operating performance are described

  4. Thyristor voltage converter in induction electric drives with microprocessor control

    Energy Technology Data Exchange (ETDEWEB)

    Braslavsky, I.; Zuzev, A.; Shilin, S. [Electric Drive Department, Urals State Technical University, Ekaterinburg (Russian Federation)

    1997-12-31

    The paper consists of some results on developed pulse model of thyristor voltage converter which is one of the most mathematically complicated unit of electric drive. The model structure and model parameter calculating method are represented. The application of the model allows to analyse stability in `locally` by the linear pulse system theory methods with talking into consideration quantise processes within the converter. Such application provides the obtaining higher accurate results comparing with the non-linear system theory approximate methods. Logarithmic frequency characteristics are used to analyse converter dynamic features and they are represented too. (orig.) 4 refs.

  5. A Dedicated Microprocessor Controller for a Bound Document Scanner.

    Science.gov (United States)

    1984-06-01

    604T C 1117 WM7erc v 0 7:7 isT -_--- 132. .7c. 825SA18255A-5 % A FUNCTIONAL DESCRIPTION CRD ral ~~~~~~~~~Read. A "low" on this input pin enapies...Slandby) 10 25 mA CE = VIH , OE VIL I 10 2 12j VC0 Current (Active) 57 100 jmA CF = =Vt 1 VIL Inu Low Voltage -0.1 0.8 V VH Input High Voltage 2.0 Vc+ 1...itli a bcdefghijklmnopcqrstuvwx~fz I K~ s’.t41 16 I mE7 il;. . ist I’r.e isr1 r hFup~jmils, ( ’sMI)righI -: 1234567890 Spartan’ Meldium 12 pt 197-7

  6. Uncovering Barriers to Teaching Assistants (TAs Implementing Inquiry Teaching: Inconsistent Facilitation Techniques, Student Resistance, and Reluctance to Share Control over Learning with Students

    Directory of Open Access Journals (Sweden)

    Cara Gormally

    2016-05-01

    Full Text Available Inquiry-based teaching approaches are increasingly being adopted in biology laboratories. Yet teaching assistants (TAs, often novice teachers, teach the majority of laboratory courses in US research universities. This study analyzed the perspectives of TAs and their students and used classroom observations to uncover challenges faced by TAs during their first year of inquiry-based teaching. Our study revealed three insights about barriers to effective inquiry teaching practices: 1 TAs lack sufficient facilitation skills; 2 TAs struggle to share control over learning with students as they reconcile long-standing teaching beliefs with newly learned approaches, consequently undermining their fledgling ability to use inquiry approaches; and 3 student evaluations reinforce teacher-centered behaviors as TAs receive positive feedback conflicting with inquiry approaches. We make recommendations, including changing instructional feedback to focus on learner-centered teaching practices. We urge TA mentors to engage TAs in discussions to uncover teaching beliefs underlying teaching choices and support TAs through targeted feedback and practice.

  7. Uncovering Barriers to Teaching Assistants (TAs) Implementing Inquiry Teaching: Inconsistent Facilitation Techniques, Student Resistance, and Reluctance to Share Control over Learning with Students.

    Science.gov (United States)

    Gormally, Cara; Sullivan, Carol Subiño; Szeinbaum, Nadia

    2016-05-01

    Inquiry-based teaching approaches are increasingly being adopted in biology laboratories. Yet teaching assistants (TAs), often novice teachers, teach the majority of laboratory courses in US research universities. This study analyzed the perspectives of TAs and their students and used classroom observations to uncover challenges faced by TAs during their first year of inquiry-based teaching. Our study revealed three insights about barriers to effective inquiry teaching practices: 1) TAs lack sufficient facilitation skills; 2) TAs struggle to share control over learning with students as they reconcile long-standing teaching beliefs with newly learned approaches, consequently undermining their fledgling ability to use inquiry approaches; and 3) student evaluations reinforce teacher-centered behaviors as TAs receive positive feedback conflicting with inquiry approaches. We make recommendations, including changing instructional feedback to focus on learner-centered teaching practices. We urge TA mentors to engage TAs in discussions to uncover teaching beliefs underlying teaching choices and support TAs through targeted feedback and practice.

  8. Uncovering Barriers to Teaching Assistants (TAs) Implementing Inquiry Teaching: Inconsistent Facilitation Techniques, Student Resistance, and Reluctance to Share Control over Learning with Students †

    Science.gov (United States)

    Gormally, Cara; Sullivan, Carol Subiño; Szeinbaum, Nadia

    2016-01-01

    Inquiry-based teaching approaches are increasingly being adopted in biology laboratories. Yet teaching assistants (TAs), often novice teachers, teach the majority of laboratory courses in US research universities. This study analyzed the perspectives of TAs and their students and used classroom observations to uncover challenges faced by TAs during their first year of inquiry-based teaching. Our study revealed three insights about barriers to effective inquiry teaching practices: 1) TAs lack sufficient facilitation skills; 2) TAs struggle to share control over learning with students as they reconcile long-standing teaching beliefs with newly learned approaches, consequently undermining their fledgling ability to use inquiry approaches; and 3) student evaluations reinforce teacher-centered behaviors as TAs receive positive feedback conflicting with inquiry approaches. We make recommendations, including changing instructional feedback to focus on learner-centered teaching practices. We urge TA mentors to engage TAs in discussions to uncover teaching beliefs underlying teaching choices and support TAs through targeted feedback and practice. PMID:27158302

  9. A microprocessor based on a two-dimensional semiconductor

    Science.gov (United States)

    Wachter, Stefan; Polyushkin, Dmitry K.; Bethge, Ole; Mueller, Thomas

    2017-04-01

    The advent of microcomputers in the 1970s has dramatically changed our society. Since then, microprocessors have been made almost exclusively from silicon, but the ever-increasing demand for higher integration density and speed, lower power consumption and better integrability with everyday goods has prompted the search for alternatives. Germanium and III-V compound semiconductors are being considered promising candidates for future high-performance processor generations and chips based on thin-film plastic technology or carbon nanotubes could allow for embedding electronic intelligence into arbitrary objects for the Internet-of-Things. Here, we present a 1-bit implementation of a microprocessor using a two-dimensional semiconductor--molybdenum disulfide. The device can execute user-defined programs stored in an external memory, perform logical operations and communicate with its periphery. Our 1-bit design is readily scalable to multi-bit data. The device consists of 115 transistors and constitutes the most complex circuitry so far made from a two-dimensional material.

  10. Guidelines for design and development of computer/microprocessor based systems in research and power reactors

    International Nuclear Information System (INIS)

    Dhodapkar, S.D.; Chandra, A.K.

    1993-01-01

    Computer systems are being used in Indian research reactors and nuclear power plants in the areas of data acquisition, process monitoring and control, alarm annunciation and safety. The design and evaluation of these systems requires a special approach particularly due to the unique nature of the software which is an essential constituent of these systems. It was decided to evolve guidelines for designing and review of computer/microprocessor based systems for use in nuclear power plants in India. The present document tries to address various issues and presents guidelines which are as comprehensive as possible and cover all issues relating to the design and development of computer based systems. These guidelines are expected to be useful to the specifiers, designers and reviewers of such systems. (author). 6 refs., 1 fig

  11. A microprocessor based monitoring system for a small nuclear reactor facility

    International Nuclear Information System (INIS)

    Miller, G.E.; DeKeyser, C.F.

    1980-01-01

    An inexpensive microprocessor based system has been designed and constructed for our 250 kilowatt TRIGA reactor facility. The system, which is beginning operational testing, can monitor on a continuous basis the status of up to 54 devices and maintain a record of events. These devices include fixed radiation monitors, pool water level trips, security alarms and an access control unit. In the latter case, the unit permits selection of different levels of access permission based on the time of day. The system can alert security and other personnel in the event of abnormalities. Because of the inclusion of this in the security system, special reliability and failure mode operation. The unit must also be simple to install, program and operate. (author)

  12. A multicontroller structure for teaching and designing predictive control strategies

    International Nuclear Information System (INIS)

    Hodouin, D.; Desbiens, A.

    1999-01-01

    The paper deals with the unification of the existing linear control algorithms in order to facilitate their transfer to the engineering students and to industry's engineers. The resulting control algorithm is the Global Predictive Control (GlobPC), which is now taught at the graduate and continuing education levels. GlobPC is based on an internal model framework where three independent control criteria are minimized: one for tracking, one for regulation and one for feedforward. This structure allows to obtain desired tracking, regulation and feedforward behaviors in an optimal way while keeping them perfectly separated. It also cleanly separates the deterministic and stochastic predictions of the process model output. (author)

  13. Efficacy of Arthroscopic Teaching Methods: A Prospective Randomized Controlled Study.

    Science.gov (United States)

    Robinson, Luke; Spanyer, Jonathon; Yenna, Zachary; Burchell, Patrick; Garber, Andrew; Riehl, John

    Arthroscopic education research recently has been focused on the use of skills labs to facilitate resident education and objective measure development to gauge technical skill. This study evaluates the effectiveness of three different teaching methods. Medical students were randomized into three groups. The first group received only classroom-based lecture. The second group received the same lecture and 28 minutes of lab-based hands-off arthroscopy instruction using a cadaver and arthroscopy setup. The final group received the same lecture and 7 minutes of hands-on arthroscopy instruction in the lab on a cadaver knee. The arthroscopic knee exam that followed simulated a diagnostic knee exam and subjects were measured on task completion and by the number of look downs. The number of look downs and the number of tasks completed did not achieve statistical significance between groups. Posttest survey results revealed that the hands-on group placed significantly more value on their educational experience as compared with the other two groups. (Journal of Surgical Orthopaedic Advances.

  14. Food Control and a Citizen Science Approach for Improving Teaching of Genetics in Universities

    Science.gov (United States)

    Borrell, Y. J.; Muñoz-Colmenero, A. M.; Dopico, E.; Miralles, L.; Garcia-Vazquez, E.

    2016-01-01

    A Citizen Science approach was implemented in the laboratory practices of Genetics at the University of Oviedo, related with the engaging topic of Food Control. Real samples of food products consumed by students at home ("students as samplers") were employed as teaching material in three different courses of Genetics during the academic…

  15. Teaching Self-Control to Small Groups of Dually Diagnosed Adults.

    Science.gov (United States)

    Dixon, Mark R.; Holcomb, Sharon

    2000-01-01

    A study used a progressive delay procedure to teach self-control to six adults with mental retardation. At baseline, participants chose an immediate smaller reinforcer rather than a larger delayed reinforcer. Progressive increases in work requirements for gaining access to a larger reinforcer resulted in participants selecting larger delayed…

  16. What Controls the Teaching of "Friluftsliv"? Analysing a Pedagogic Discourse within Swedish Physical Education

    Science.gov (United States)

    Backman, Erik

    2011-01-01

    Research indicates that outdoor teaching practices within a physical education (PE) context are controlled by several factors with the potential to weaken or strengthen PE teachers' communication of pedagogic messages. Drawing on 12 qualitative interviews with PE teachers in compulsory schools in Sweden, the findings in this study suggest that…

  17. A Randomized Control Study of Responsive Teaching with Young Turkish Children and Their Mothers

    Science.gov (United States)

    Karaaslan, Ozcan; Diken, Ibrahim H.; Mahoney, Gerald

    2013-01-01

    A randomized control study was conducted to evaluate the effectiveness of responsive teaching (RT) with a sample of 19 Turkish preschool-age children with disabilities and their mothers over a 6-months period. RT is an early intervention curriculum that attempts to promote children's development by encouraging parents to engage in highly…

  18. Improving the Teaching of Discrete-Event Control Systems Using a LEGO Manufacturing Prototype

    Science.gov (United States)

    Sanchez, A.; Bucio, J.

    2012-01-01

    This paper discusses the usefulness of employing LEGO as a teaching-learning aid in a post-graduate-level first course on the control of discrete-event systems (DESs). The final assignment of the course is presented, which asks students to design and implement a modular hierarchical discrete-event supervisor for the coordination layer of a…

  19. Environmental test chamber for the support of learning and teaching in intelligent control

    OpenAIRE

    Taylor, C. James

    2004-01-01

    The paper describes the utility of a low cost, 1 m2 by 2 m forced ventilation, micro-climate test chamber, for the support of research and teaching in mechatronics. Initially developed for the evaluation of a new ventilation rate controller, the fully instrumented chamber now provides numerous learning opportunities and individual projects for both undergraduate and postgraduate research students.

  20. Use of university research reactors to teach control engineering

    International Nuclear Information System (INIS)

    Bernard, J.A.

    1991-01-01

    University research reactors (URRs) have provided generations of students with the opportunity to receive instruction and do hands-on work in reactor dynamics, neutron scattering, health physics, and neutron activation analysis. Given that many URRs are currently converting to programmable control systems, the opportunity now exists to provide a similar learning experience to those studying systems control engineering. That possibility is examined here with emphasis on the need for the inclusion of experiment in control engineering curricula, the type of activities that could be performed, and safety considerations

  1. Relations Between Student Procrastination and Teaching Styles: Autonomy-Supportive and Controlling.

    Science.gov (United States)

    Codina, Nuria; Valenzuela, Rafael; Pestana, Jose V; Gonzalez-Conde, Joan

    2018-01-01

    Procrastination is a complex problem that can be defined as delaying an intended course of action (despite anticipating adverse consequences). Even when some students have equivalent motivation and skill levels, they tend to procrastinate more frequently than others. Approaches that analyze whether contextual influences may prevent or promote dysregulation processes associated with procrastination are scarce. According to Self-Determination Theory, contextual influences can facilitate self-regulated motivation (e.g., autonomous pursuit of interests or personal goals), if teaching style is autonomy-supportive and guarantees the satisfaction of students' basic psychological needs for perceived competence, autonomy, and relatedness. Contrariwise, school context can also impede the development of autonomous motivation if teachers frustrate the satisfaction of their students' psychological needs by recurring to controlling teaching behaviors, such as controlling use of rewards, negative conditional regard, excessive personal control, or intimidation. The goal of the present study was to assess the relations between controlling and autonomy-supportive teaching behaviors, psychological needs satisfaction (of the needs for competence, autonomy, and relatedness), and four distinct measures of procrastination: general procrastination, decisional procrastination, procrastination linked to task avoidance, and pure procrastination. Data based on public university undergraduate students ( N = 672) shows that controlling teaching behaviors are associated negatively with psychological needs satisfaction and positively with procrastination. Contrariwise, autonomy-supportive teaching behaviors are positively associated with psychological needs satisfaction and negatively with procrastination. The data obtained is useful for suggesting new lines of research to study the link between contextual influences and the prevention of academic procrastination in view of Self

  2. Relations Between Student Procrastination and Teaching Styles: Autonomy-Supportive and Controlling

    Directory of Open Access Journals (Sweden)

    Nuria Codina

    2018-05-01

    Full Text Available Procrastination is a complex problem that can be defined as delaying an intended course of action (despite anticipating adverse consequences. Even when some students have equivalent motivation and skill levels, they tend to procrastinate more frequently than others. Approaches that analyze whether contextual influences may prevent or promote dysregulation processes associated with procrastination are scarce. According to Self-Determination Theory, contextual influences can facilitate self-regulated motivation (e.g., autonomous pursuit of interests or personal goals, if teaching style is autonomy-supportive and guarantees the satisfaction of students’ basic psychological needs for perceived competence, autonomy, and relatedness. Contrariwise, school context can also impede the development of autonomous motivation if teachers frustrate the satisfaction of their students’ psychological needs by recurring to controlling teaching behaviors, such as controlling use of rewards, negative conditional regard, excessive personal control, or intimidation. The goal of the present study was to assess the relations between controlling and autonomy-supportive teaching behaviors, psychological needs satisfaction (of the needs for competence, autonomy, and relatedness, and four distinct measures of procrastination: general procrastination, decisional procrastination, procrastination linked to task avoidance, and pure procrastination. Data based on public university undergraduate students (N = 672 shows that controlling teaching behaviors are associated negatively with psychological needs satisfaction and positively with procrastination. Contrariwise, autonomy-supportive teaching behaviors are positively associated with psychological needs satisfaction and negatively with procrastination. The data obtained is useful for suggesting new lines of research to study the link between contextual influences and the prevention of academic procrastination in view of

  3. Microprocessor-based integrated LMFBR core surveillance. Pt. 2

    International Nuclear Information System (INIS)

    Elies, V.

    1985-12-01

    This report is the result of the KfK part of a joint study of KfK and INTERATOM. The aim of this study is to explore the advantages of microprocessors and microelectronics for a more sophisticated core surveillance, which is based on the integration of separate surveillance techniques. After a description of the experimental results gained with the different surveillance techniques so far, it is shown which kinds of correlation can be done using the evaluation results obtained from the single surveillance systems. The main part of this report contains the systems analysis of a microcomputer-based system integrating different surveillance methods. After an analysis of the hardware requirements a hardware structure for the integrated system is proposed. The software structure is then described for the subsystem performing the different surveillance algorithms as well as for the system which does the correlation thus deriving additional information from the single results. (orig.) [de

  4. A Fourier transform with speed improvements for microprocessor applications

    Science.gov (United States)

    Lokerson, D. C.; Rochelle, R.

    1980-01-01

    A fast Fourier transform algorithm for the RCA 1802microprocessor was developed for spacecraft instrument applications. The computations were tailored for the restrictions an eight bit machine imposes. The algorithm incorporates some aspects of Walsh function sequency to improve operational speed. This method uses a register to add a value proportional to the period of the band being processed before each computation is to be considered. If the result overflows into the DF register, the data sample is used in computation; otherwise computation is skipped. This operation is repeated for each of the 64 data samples. This technique is used for both sine and cosine portions of the computation. The processing uses eight bit data, but because of the many computations that can increase the size of the coefficient, floating point form is used. A method to reduce the alias problem in the lower bands is also described.

  5. Teaching Thermal Hydraulics & Numerical Methods: An Introductory Control Volume Primer

    Energy Technology Data Exchange (ETDEWEB)

    Lucas, D.S.

    2004-10-03

    This paper covers the basics of the implementation of the control volume method in the context of the Homogeneous Equilibrium Model (HEM)(T/H) code using the conservation equations of mass, momentum, and energy. This primer uses the advection equation as a template. The discussion will cover the basic equations of the control volume portion of the course in the primer, which includes the advection equation, numerical methods, along with the implementation of the various equations via FORTRAN into computer programs and the final result for a three equation HEM code and its validation.

  6. A randomised controlled trial of a blended learning education intervention for teaching evidence-based medicine.

    Science.gov (United States)

    Ilic, Dragan; Nordin, Rusli Bin; Glasziou, Paul; Tilson, Julie K; Villanueva, Elmer

    2015-03-10

    Few studies have been performed to inform how best to teach evidence-based medicine (EBM) to medical trainees. Current evidence can only conclude that any form of teaching increases EBM competency, but cannot distinguish which form of teaching is most effective at increasing student competency in EBM. This study compared the effectiveness of a blended learning (BL) versus didactic learning (DL) approach of teaching EBM to medical students with respect to competency, self-efficacy, attitudes and behaviour toward EBM. A mixed methods study consisting of a randomised controlled trial (RCT) and qualitative case study was performed with medical students undertaking their first clinical year of training in EBM. Students were randomly assigned to receive EBM teaching via either a BL approach or the incumbent DL approach. Competency in EBM was assessed using the Berlin questionnaire and the 'Assessing Competency in EBM' (ACE) tool. Students' self-efficacy, attitudes and behaviour was also assessed. A series of focus groups was also performed to contextualise the quantitative results. A total of 147 students completed the RCT, and a further 29 students participated in six focus group discussions. Students who received the BL approach to teaching EBM had significantly higher scores in 5 out of 6 behaviour domains, 3 out of 4 attitude domains and 10 out of 14 self-efficacy domains. Competency in EBM did not differ significantly between students receiving the BL approach versus those receiving the DL approach [Mean Difference (MD)=-0.68, (95% CI-1.71, 0.34), p=0.19]. No significant difference was observed between sites (p=0.89) or by student type (p=0.58). Focus group discussions suggested a strong student preference for teaching using a BL approach, which integrates lectures, online learning and small group activities. BL is no more effective than DL at increasing medical students' knowledge and skills in EBM, but was significantly more effective at increasing student

  7. Teaching Thermal Hydraulics & Numerical Methods: An Introductory Control Volume Primer

    Energy Technology Data Exchange (ETDEWEB)

    D. S. Lucas

    2004-10-01

    A graduate level course for Thermal Hydraulics (T/H) was taught through Idaho State University in the spring of 2004. A numerical approach was taken for the content of this course since the students were employed at the Idaho National Laboratory and had been users of T/H codes. The majority of the students had expressed an interest in learning about the Courant Limit, mass error, semi-implicit and implicit numerical integration schemes in the context of a computer code. Since no introductory text was found the author developed notes taught from his own research and courses taught for Westinghouse on the subject. The course started with a primer on control volume methods and the construction of a Homogeneous Equilibrium Model (HEM) (T/H) code. The primer was valuable for giving the students the basics behind such codes and their evolution to more complex codes for Thermal Hydraulics and Computational Fluid Dynamics (CFD). The course covered additional material including the Finite Element Method and non-equilibrium (T/H). The control volume primer and the construction of a three-equation (mass, momentum and energy) HEM code are the subject of this paper . The Fortran version of the code covered in this paper is elementary compared to its descendants. The steam tables used are less accurate than the available commercial version written in C Coupled to a Graphical User Interface (GUI). The Fortran version and input files can be downloaded at www.microfusionlab.com.

  8. The Effect of a Microprocessor Prosthetic Foot on Function and Quality of Life in Transtibial Amputees Who Are Limited Community Ambulators

    Science.gov (United States)

    2017-09-01

    motion and active power , will translate into improved functional performance, ambulatory safety (risk of falls) and quality of life in trans-tibial...clinical trial designed to determine if a microprocessor controlled prosthetic foot (MPF), with greater range of motion and active power , will...contact over a 6 month period of time and receive physical therapy training to minimize deviations resulting from habit or lack of training, education

  9. Control code for laboratory adaptive optics teaching system

    Science.gov (United States)

    Jin, Moonseob; Luder, Ryan; Sanchez, Lucas; Hart, Michael

    2017-09-01

    By sensing and compensating wavefront aberration, adaptive optics (AO) systems have proven themselves crucial in large astronomical telescopes, retinal imaging, and holographic coherent imaging. Commercial AO systems for laboratory use are now available in the market. One such is the ThorLabs AO kit built around a Boston Micromachines deformable mirror. However, there are limitations in applying these systems to research and pedagogical projects since the software is written with limited flexibility. In this paper, we describe a MATLAB-based software suite to interface with the ThorLabs AO kit by using the MATLAB Engine API and Visual Studio. The software is designed to offer complete access to the wavefront sensor data, through the various levels of processing, to the command signals to the deformable mirror and fast steering mirror. In this way, through a MATLAB GUI, an operator can experiment with every aspect of the AO system's functioning. This is particularly valuable for tests of new control algorithms as well as to support student engagement in an academic environment. We plan to make the code freely available to the community.

  10. Impact of postgraduate training on communication skills teaching: a controlled study

    Science.gov (United States)

    2014-01-01

    Background Observation of performance followed by feedback is the key to good teaching of communication skills in clinical practice. The fact that it occurs rarely is probably due to clinical supervisors’ perceived lack of competence to identify communication skills and give effective feedback. We evaluated the impact of a faculty development programme on communication skills teaching on clinical supervisors’ ability to identify residents’ good and poor communication skills and to discuss them interactively during feedback. Methods We conducted a pre-post controlled study in which clinical supervisors took part to a faculty development program on teaching communication skills in clinical practice. Outcome measures were the number and type of residents’ communication skills identified by supervisors in three videotaped simulated resident-patient encounters and the number and type of communication skills discussed interactively with residents during three feedback sessions. Results 48 clinical supervisors (28 intervention group; 20 control group) participated. After the intervention, the number and type of communication skills identified did not differ between both groups. There was substantial heterogeneity in the number and type of communication skills identified. However, trained participants engaged in interactive discussions with residents on a significantly higher number of communication items (effect sizes 0.53 to 1.77); communication skills items discussed interactively included both structural and patient-centered elements that were considered important to be observed by expert teachers. Conclusions The faculty development programme did not increase the number of communication skills recognised by supervisors but was effective in increasing the number of communication issues discussed interactively in feedback sessions. Further research should explore the respective impact of accurate identification of communication skills and effective teaching

  11. Impact of postgraduate training on communication skills teaching: a controlled study.

    Science.gov (United States)

    Junod Perron, Noelle; Nendaz, Mathieu; Louis-Simonet, Martine; Sommer, Johanna; Gut, Anne; Cerutti, Bernard; van der Vleuten, Cees P; Dolmans, Diana

    2014-04-14

    Observation of performance followed by feedback is the key to good teaching of communication skills in clinical practice. The fact that it occurs rarely is probably due to clinical supervisors' perceived lack of competence to identify communication skills and give effective feedback. We evaluated the impact of a faculty development programme on communication skills teaching on clinical supervisors' ability to identify residents' good and poor communication skills and to discuss them interactively during feedback. We conducted a pre-post controlled study in which clinical supervisors took part to a faculty development program on teaching communication skills in clinical practice. Outcome measures were the number and type of residents' communication skills identified by supervisors in three videotaped simulated resident-patient encounters and the number and type of communication skills discussed interactively with residents during three feedback sessions. 48 clinical supervisors (28 intervention group; 20 control group) participated. After the intervention, the number and type of communication skills identified did not differ between both groups. There was substantial heterogeneity in the number and type of communication skills identified. However, trained participants engaged in interactive discussions with residents on a significantly higher number of communication items (effect sizes 0.53 to 1.77); communication skills items discussed interactively included both structural and patient-centered elements that were considered important to be observed by expert teachers. The faculty development programme did not increase the number of communication skills recognised by supervisors but was effective in increasing the number of communication issues discussed interactively in feedback sessions. Further research should explore the respective impact of accurate identification of communication skills and effective teaching skills on achieving more effective communication

  12. A Mock Randomized Controlled Trial With Audience Response Technology for Teaching and Learning Epidemiology.

    Science.gov (United States)

    Baker, Philip R A; Francis, Daniel P; Cathcart, Abby

    2017-04-01

    The study's objective was to apply and assess an active learning approach to epidemiology and critical appraisal. Active learning comprised a mock, randomized controlled trial (RCT) conducted with learners in 3 countries. The mock trial consisted of blindly eating red Smarties candy (intervention) compared to yellow Smarties (control) to determine whether red Smarties increase happiness. Audience response devices were employed with the 3-fold purposes to produce outcome data for analysis of the effects of red Smarties, identify baseline and subsequent changes in participant's knowledge and confidence in understanding of RCTs, and assess the teaching approach. Of those attending, 82% (117 of 143 learners) participated in the trial component. Participating in the mock trial was a positive experience, and the use of the technology aided learning. The trial produced data that learners analyzed in "real time" during the class. The mock RCT is a fun and engaging approach to teaching RCTs and helping students to develop skills in critical appraisal.

  13. Fuzzy Concurrent Object Oriented Expert System for Fault Diagnosis in 8085 Microprocessor Based System Board

    OpenAIRE

    Mr.D. V. Kodavade; Dr. Mrs.S.D.Apte

    2014-01-01

    With the acceptance of artificial intelligence paradigm, a number of successful artificial intelligence systems were created. Fault diagnosis in microprocessor based boards needs lot of empirical knowledge and expertise and is a true artificial intelligence problem. Research on fault diagnosis in microprocessor based system boards using new fuzzy-object oriented approach is presented in this paper. There are many uncertain situations observed during fault diagnosis. These uncertain situations...

  14. Teaching self-control to small groups of dually diagnosed adults.

    OpenAIRE

    Dixon, M R; Holcomb, S

    2000-01-01

    The present study examined the use of a progressive delay procedure to teach self-control to two groups of dually diagnosed adults. When given a choice between an immediate smaller reinforcer and a larger delayed reinforcer, both groups chose the smaller reinforcer during baseline. During treatment, progressive increases in work requirements for gaining access to a larger reinforcer resulted in both groups selecting larger delayed reinforcers. The results are discussed with respect to increas...

  15. High-Stakes Examination Preparation that Controls Teaching: Chinese Prospective Teachers' Conceptions of Excellent Teaching and Assessment

    Science.gov (United States)

    Chen, Junjun; Brown, Gavin T. L.

    2013-01-01

    How prospective teachers conceive of teaching excellence and assessment purposes probably influences how teaching and assessment practices are implemented in the future. This study evaluated, in four "normal universities" in the People's Republic of China, 765 prospective teachers' responses to two self-report instruments regarding the…

  16. Video Coaching as an Efficient Teaching Method for Surgical Residents-A Randomized Controlled Trial.

    Science.gov (United States)

    Soucisse, Mikael L; Boulva, Kerianne; Sideris, Lucas; Drolet, Pierre; Morin, Michel; Dubé, Pierre

    As surgical training is evolving and operative exposure is decreasing, new, effective, and experiential learning methods are needed to ensure surgical competency and patient safety. Video coaching is an emerging concept in surgery that needs further investigation. In this randomized controlled trial conducted at a single teaching hospital, participating residents were filmed performing a side-to-side intestinal anastomosis on cadaveric dog bowel for baseline assessment. The Surgical Video Coaching (SVC) group then participated in a one-on-one video playback coaching and debriefing session with a surgeon, during which constructive feedback was given. The control group went on with their normal clinical duties without coaching or debriefing. All participants were filmed making a second intestinal anastomosis. This was compared to their first anastomosis using a 7-category-validated technical skill global rating scale, the Objective Structured Assessment of Technical Skills. A single independent surgeon who did not participate in coaching or debriefing to the SVC group reviewed all videos. A satisfaction survey was then sent to the residents in the coaching group. Department of Surgery, HôpitalMaisonneuve-Rosemont, tertiary teaching hospital affiliated to the University of Montreal, Canada. General surgery residents from University of Montreal were recruited to take part in this trial. A total of 28 residents were randomized and completed the study. After intervention, the SVC group (n = 14) significantly increased their Objective Structured Assessment of Technical Skills score (mean of differences 3.36, [1.09-5.63], p = 0.007) when compared to the control group (n = 14) (mean of differences 0.29, p = 0.759). All residents agreed or strongly agreed that video coaching was a time-efficient teaching method. Video coaching is an effective and efficient teaching intervention to improve surgical residents' technical skills. Crown Copyright © 2017. Published by Elsevier

  17. Biosorption of gold from computer microprocessor leachate solutions using chitin.

    Science.gov (United States)

    Côrtes, Letícia N; Tanabe, Eduardo H; Bertuol, Daniel A; Dotto, Guilherme L

    2015-11-01

    The biosorption of gold from discarded computer microprocessor (DCM) leachate solutions was studied using chitin as a biosorbent. The DCM components were leached with thiourea solutions, and two procedures were tested for recovery of gold from the leachates: (1) biosorption and (2) precipitation followed by biosorption. For each procedure, the biosorption was evaluated considering kinetic, equilibrium, and thermodynamic aspects. The general order model was able to represent the kinetic behavior, and the equilibrium was well represented by the BET model. The maximum biosorption capacities were around 35 mg g(-1) for both procedures. The biosorption of gold on chitin was a spontaneous, favorable, and exothermic process. It was found that precipitation followed by biosorption resulted in the best gold recovery, because other species were removed from the leachate solution in the precipitation step. This method enabled about 80% of the gold to be recovered, using 20 g L(-1) of chitin at 298 K for 4 h. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Environmental dose measurement with microprocessor based portable TLD reader

    International Nuclear Information System (INIS)

    Deme, S.; Apathy, I.; Feher, I.

    1996-01-01

    Application of TL method for environmental gamma-radiation dosimetry involves uncertainty caused by the dose collected during the transport from the point of annealing to the place of exposure and back to the place of evaluation. Should an accident occur read out is delayed due to the need to transport to a laboratory equipped with a TLD reader. A portable reader capable of reading out the TL dosemeter at the place of exposure ('in situ TLD reader') eliminates the above mentioned disadvantages. We have developed a microprocessor based portable TLD reader for monitoring environmental gamma-radiation doses and for on board reading out of doses on space stations. The first version of our portable, battery operated reader (named Pille - 'butterfly') was made at the beginning of the 80s. These devices used CaSO 4 bulb dosemeters and the evaluation technique was based on analogue timing circuits and analogue to digital conversion of the photomultiplier current with a read out precision of 1 μGy and a measuring range up to 10 Gy. The measured values were displayed and manually recorded. The version with an external power supply was used for space dosimetry as an onboard TLD reader

  19. The Effect of Job Demand-Control-Social Support Model on Nurses' Job Satisfaction in Specialized Teaching Hospitals, Ethiopia

    OpenAIRE

    Negussie, Nebiat; Kaur, Geetinder

    2016-01-01

    Background The job demand-control-social support model has been widely studied in western countries but has not been theoretically addressed on health workers of sub-Saharan African countries. Therefore, this study investigates the relationship between Job Demand-Control-Support Model and job satisfaction in specialized teaching hospitals in Ethiopia. Method A cross-sectional survey was conducted from September 2014 to May 2015 in three public specialized teaching hospitals in Ethiopia. Among...

  20. A top-down approach in control engineering third-level teaching: The case of hydrogen-generation

    Science.gov (United States)

    Setiawan, Eko; Habibi, M. Afnan; Fall, Cheikh; Hodaka, Ichijo

    2017-09-01

    This paper presents a top-down approach in control engineering third-level teaching. The paper shows the control engineering solution for the issue of practical implementation in order to motivate students. The proposed strategy only focuses on one technique of control engineering to lead student correctly. The proposed teaching steps are 1) defining the problem, 2) listing of acquired knowledge or required skill, 3) selecting of one control engineering technique, 4) arrangement the order of teaching: problem introduction, implementation of control engineering technique, explanation of system block diagram, model derivation, controller design, and 5) enrichment knowledge by the other control techniques. The approach presented highlights hardware implementation and the use of software simulation as a self-learning tool for students.

  1. Regulation of Plant Microprocessor Function in Shaping microRNA Landscape

    Directory of Open Access Journals (Sweden)

    Jakub Dolata

    2018-06-01

    Full Text Available MicroRNAs are small molecules (∼21 nucleotides long that are key regulators of gene expression. They originate from long stem–loop RNAs as a product of cleavage by a protein complex called Microprocessor. The core components of the plant Microprocessor are the RNase type III enzyme Dicer-Like 1 (DCL1, the zinc finger protein Serrate (SE, and the double-stranded RNA binding protein Hyponastic Leaves 1 (HYL1. Microprocessor assembly and its processing of microRNA precursors have been reported to occur in discrete nuclear bodies called Dicing bodies. The accessibility of and modifications to Microprocessor components affect microRNA levels and may have dramatic consequences in plant development. Currently, numerous lines of evidence indicate that plant Microprocessor activity is tightly regulated. The cellular localization of HYL1 is dependent on a specific KETCH1 importin, and the E3 ubiquitin ligase COP1 indirectly protects HYL1 from degradation in a light-dependent manner. Furthermore, proper localization of HYL1 in Dicing bodies is regulated by MOS2. On the other hand, the Dicing body localization of DCL1 is regulated by NOT2b, which also interacts with SE in the nucleus. Post-translational modifications are substantial factors that contribute to protein functional diversity and provide a fine-tuning system for the regulation of protein activity. The phosphorylation status of HYL1 is crucial for its activity/stability and is a result of the interplay between kinases (MPK3 and SnRK2 and phosphatases (CPL1 and PP4. Additionally, MPK3 and SnRK2 are known to phosphorylate SE. Several other proteins (e.g., TGH, CDF2, SIC, and RCF3 that interact with Microprocessor have been found to influence its RNA-binding and processing activities. In this minireview, recent findings on the various modes of Microprocessor activity regulation are discussed.

  2. The impact of blended teaching on knowledge, satisfaction, and self-directed learning in nursing undergraduates: a randomized, controlled trial.

    Science.gov (United States)

    Gagnon, Marie-Pierre; Gagnon, Johanne; Desmartis, Marie; Njoya, Merlin

    2013-01-01

    This study aimed to assess the effectiveness of a blended-teaching intervention using Internet-based tutorials coupled with traditional lectures in an introduction to research undergraduate nursing course. Effects of the intervention were compared with conventional, face-to-face classroom teaching on three outcomes: knowledge, satisfaction, and self-learning readiness. A two-group, randomized, controlled design was used, involving 112 participants. Descriptive statistics and analysis of covariance (ANCOVA) were performed. The teaching method was found to have no direct impact on knowledge acquisition, satisfaction, and self-learning readiness. However, motivation and teaching method had an interaction effect on knowledge acquisition by students. Among less motivated students, those in the intervention group performed better than those who received traditional training. These findings suggest that this blended-teaching method could better suit some students, depending on their degree of motivation and level of self-directed learning readiness.

  3. The Effectiveness of Teaching Intervention Internal Locus of Control on Increasing Marital Adjustment and Satisfaction

    Directory of Open Access Journals (Sweden)

    Askari Asghari-Ganji

    2015-03-01

    Full Text Available Background and purpose: Satisfaction with marital life is the most important issue in the joint life, which has the greatest effect on durability and failure of couple’s lives. Based on this, the main goal of the present research is to study the effectiveness of teaching intervention based on internal locus of control in increasing marital adjustment and satisfaction has been investigated. Materials and Methods: The research design was pre- and post-test with control group. Statistical population of this research includes 100 married students of Farhangian University of Babol, Iran. To determine the sample, initially 100 questionnaires of Rotter’s locus of control and Spanier’s marital adjustment were distributed among the married students. Among this population, 42 couples both had external locus of control and suffered marital maladjustment, 20 couples were selected by simple randomized method and were placed into two experimental and control groups, such that 10 couples were placed in the experimental group and 10 couples were placed in control group. Data were analyzed using the independent t-test method. Results: Research results showed that, since effectiveness of training communicational skills based on internal locus of control on increasing marital attachment of couples was calculated t-value (t = 6.04 and (t= 4.71 for women and men, respectively with degree of freedom of 19 is bigger than t-value in the table (t = 2.53 therefore, null hypothesis is rejected and with confidence degree of 99%. Conclusion: Teaching intervention based on internal control can be used as one of the intervention models for couples who suffer from marital dissatisfaction and think of divorce.

  4. Student assessment of teaching effectiveness of "bundle of changes"-A paired, controlled trial

    Directory of Open Access Journals (Sweden)

    Seema Kalra

    2011-01-01

    Full Text Available Background : Inching toward optimum patient safety by training personnel is the prime aim of the ongoing medical education. Aims : To assess whether lectures targeted to improve quality care in ICU could improve ICU practitioners′ knowledge levels and to evaluate the effectiveness of teaching. Settings and Design : In this paired controlled trial, 50 ICU practitioners, i.e., anesthesia and medicine residents and nursing staff of our hospital attended a series of four lectures. Materials and Methods : Participants enrolled in the study attended lectures on "bundles of changes" in ICU, namely, introduction, ventilator bundle, central line bundle, and catheter-related blood stream infections and severe sepsis bundle. They were given a questionnaire of 15 multiple choice questions prior to and after the lectures. We evaluated their immediate knowledge acquisition and retention recall. Subsequently, they evaluated the effectiveness of the teaching programme by a questionnaire of 10 multiple choice questions. Statistical analysis used: Data for statistical analysis were tabulated and analyzed using SPSS-Pc 11.5 version software. Results : Fifty study participants completed all three questionnaires. There was an increase in the overall mean score in the post-lecture test (4.58 + 1.51 SD (P < 0.001. Overall mean score increased significantly from 8.30 + 1.34 SD in THE pre-lecture test - to 12.02 + 1.61 SD in the postlecture re-test (3.72 + 1.39 SD (P < 0.001. In the evaluation of teaching effectiveness 88% respondents agreed to most of the questions, signifying the effectiveness of the lectures. However, there were 10% who disagreed to the questions and only 2% strongly disagreed to all the questions. Conclusions : Teaching programmes such as the "bundle of changes" are effective in improving immediate knowledge acquisition and retention recall of the participants if designed keeping the target audience in mind.

  5. Upset due to a single particle caused propagated transients in a bulk CMOS microprocessor

    International Nuclear Information System (INIS)

    Leavy, J.F.; Hoffmann, L.F.; Shoran, R.W.; Johnson, M.T.

    1991-01-01

    This paper reports on data pattern advances observed in preset, single event upset (SEU) hardened clocked flip-flops, during static Cf-252 exposures on a bulk CMOS microprocessor, that were attributable to particle caused anomalous clock signals, or propagated transients. SPICE simulations established that particle strikes in the output nodes of a clock control logic flip-flop could produce transients of sufficient amplitude and duration to be accepted as legitimate pulses by clock buffers fed by the flip-flop's output nodes. The buffers would then output false clock pulses, thereby advancing the state of the present flip-flops. Masking the clock logic on one of the test chips made the flip-flop data advance cease, confirming the clock logic as the source of the SEU. By introducing N 2 gas, at reduced pressures, into the SEU test chamber to attenuate Cf-252 particle LET's, a 24-26 MeV-cm 2 /mg LET threshold was deduced. Subsequent tests, at the 88-inch cyclotron at Berkeley, established an LET threshold of 30 MeV-cm 2 /mg (283 MeV Cu at 0 degrees) for the generation of false clocks. Cyclotron SEU tests are considered definitive, while Cf-252 data usually is not. However, in this instance Cf-252 tests proved analytically useful, providing SEU characterization data that was both timely and inexpensive

  6. Development of a Wiimote-based Gesture Recognizer in a Microprocessor Laboratory Course

    Directory of Open Access Journals (Sweden)

    Alberto Lorente Leal

    2011-03-01

    Full Text Available This gesture recognizer, developed by students in a third-year microprocessor-based laboratory course, takes Wii remote (Wiimote as an input device to estimate the movements of the user and to compare the detected trajectory with the previously learnt movements, in order to carry out the associated actions. Such a cheap state-of-the-art wireless user interface is very attractive for the students and can be used in many interactive applications, from robotics to virtual reality and multimedia presentations. By combining commercially-available hardware, pattern-matching techniques and programming skills, we are able to foster students' interest on developing innovative potentially-marketable systems. This freeware project, implemented as a configurable publicly-available library, can be adapted to the needs of any course or student. In our laboratory this open-source DLL is used for remotely controlling a robot (based on an open-hardware Arduino platform, using a PC and the Wiimote, although the DLL can be integrated in any C, C++, Java or C# project. A GUI application (based on a Model-View-Presenter paradigm is also provided and can be used as a template for new applications or just for debugging purposes. Although the developed application only uses data from the accelerometers, data from the infrared camera and buttons of the Wiimote is also available.

  7. Equipment calibration with a microprocessor connected to a time-sharing system

    International Nuclear Information System (INIS)

    Fontaine, G.; Guglielmi, L.; Jaeger, J.J.; Szafran, S.

    1981-01-01

    In H.E.P., it is common practice to test and calibrate equipment at different stages (design, construction checks, setting up and running periods) with a dedicated mini or micro-computer (such as CERN CAVIAR). An alternative solution has been developed in which such tasks are split between a microprocessor (Motorola 6800), and a host computer; this allows an easy and cheap multiplication of independant testing set-ups. The local processor is limited to CAMAC data acquisition, histogramming and simple processing, but its computing power is enhanced by a connection to a host time-sharing system via a MUMM multiplexor described in a separate paper. It is thus possible to perform sophisticated computations (fits etc...) and to use the host disk space to store calibration results for later use. In spite of the use of assembly language, a software structure has been devised to ease the constitution of an application program. This is achieved by the interplay of three levels of facilities: macro-instructions, library of subroutines, and Patchy controlled pieces of programs. A comprehensive collection of these is kept in the form of PAM files on the host computer. This system has been used to test calorimeter modules for the UA 1 experiment. (orig.)

  8. Application of multiwall carbon nanotubes for thermal dissipation in a micro-processor

    Energy Technology Data Exchange (ETDEWEB)

    Bui Hung Thang; Phan Ngoc Hong; Phan Hong Khoi; Phan Ngoc Minh [Institute of Materials Science, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet Road, Cau Giay District, Hanoi (Viet Nam)], E-mail: minhpn@ims.vast.ac.vn

    2009-09-01

    One of the most valuable properties of the carbon nanotubes materials is its high thermal conductivity with 2000 W/m.K (compared to thermal conductivity of Ag 419 W/m.K). It suggested an approach in applying the CNTs in thermal dissipation media to improve the performance of computer processors and other high power electronic devices. In this research, the multiwall carbon nanotubes (MWCNTs) made by thermal chemical vapour deposition (CVD) at our laboratory was employed as the heat dissipation media in a microprocessor a Personal Computer with configuration: Intel Pentium IV 3.066 GHz, 512Mb of RAM and Windows XP Service Pack 2 Operating System. We directly measured the temperature of the microprocessor during the operation of the computer in two modes: 100% usage CPU mode and over-clocking mode. The measured results showed that when using our thermal dissipation media (a mixture of the mentioned commercial thermal compound and 2 wt.%. MWCNTs), the temperature of the microprocessor decreased 5 deg. C, and the time for increasing the temperature of the microprocessor was three times longer than that when using commercial thermal compound. In over-clocking mode, the processor speed reached 3.8 GHz with 165 MHz of system bus clock speed; it was 1.24 times higher than that in non over-clocking mode. The results confirmed a promising way of using MWCNTs as the thermal dissipation media for microprocessor and high power electronic devices.

  9. Application of multiwall carbon nanotubes for thermal dissipation in a micro-processor

    Science.gov (United States)

    Thang, Bui Hung; Hong, Phan Ngoc; Khoi, Phan Hong; Minh, Phan Ngoc

    2009-09-01

    One of the most valuable properties of the carbon nanotubes materials is its high thermal conductivity with 2000 W/m.K (compared to thermal conductivity of Ag 419 W/m.K). It suggested an approach in applying the CNTs in thermal dissipation media to improve the performance of computer processors and other high power electronic devices. In this research, the multiwall carbon nanotubes (MWCNTs) made by thermal chemical vapour deposition (CVD) at our laboratory was employed as the heat dissipation media in a microprocessor a Personal Computer with configuration: Intel Pentium IV 3.066 GHz, 512Mb of RAM and Windows XP Service Pack 2 Operating System. We directly measured the temperature of the microprocessor during the operation of the computer in two modes: 100% usage CPU mode and over-clocking mode. The measured results showed that when using our thermal dissipation media (a mixture of the mentioned commercial thermal compound and 2 wt.%. MWCNTs), the temperature of the microprocessor decreased 5°C, and the time for increasing the temperature of the microprocessor was three times longer than that when using commercial thermal compound. In over-clocking mode, the processor speed reached 3.8 GHz with 165 MHz of system bus clock speed; it was 1.24 times higher than that in non over-clocking mode. The results confirmed a promising way of using MWCNTs as the thermal dissipation media for microprocessor and high power electronic devices.

  10. Application of multiwall carbon nanotubes for thermal dissipation in a micro-processor

    International Nuclear Information System (INIS)

    Bui Hung Thang; Phan Ngoc Hong; Phan Hong Khoi; Phan Ngoc Minh

    2009-01-01

    One of the most valuable properties of the carbon nanotubes materials is its high thermal conductivity with 2000 W/m.K (compared to thermal conductivity of Ag 419 W/m.K). It suggested an approach in applying the CNTs in thermal dissipation media to improve the performance of computer processors and other high power electronic devices. In this research, the multiwall carbon nanotubes (MWCNTs) made by thermal chemical vapour deposition (CVD) at our laboratory was employed as the heat dissipation media in a microprocessor a Personal Computer with configuration: Intel Pentium IV 3.066 GHz, 512Mb of RAM and Windows XP Service Pack 2 Operating System. We directly measured the temperature of the microprocessor during the operation of the computer in two modes: 100% usage CPU mode and over-clocking mode. The measured results showed that when using our thermal dissipation media (a mixture of the mentioned commercial thermal compound and 2 wt.%. MWCNTs), the temperature of the microprocessor decreased 5 deg. C, and the time for increasing the temperature of the microprocessor was three times longer than that when using commercial thermal compound. In over-clocking mode, the processor speed reached 3.8 GHz with 165 MHz of system bus clock speed; it was 1.24 times higher than that in non over-clocking mode. The results confirmed a promising way of using MWCNTs as the thermal dissipation media for microprocessor and high power electronic devices.

  11. Food control and a citizen science approach for improving teaching of Genetics in universities.

    Science.gov (United States)

    Borrell, Y J; Muñoz-Colmenero, A M; Dopico, E; Miralles, L; Garcia-Vazquez, E

    2016-09-10

    A Citizen Science approach was implemented in the laboratory practices of Genetics at the University of Oviedo, related with the engaging topic of Food Control. Real samples of food products consumed by students at home (students as samplers) were employed as teaching material in three different courses of Genetics during the academic year 2014-2015: Experimental Methods in Food Production (MBTA) (Master level), and Applied Molecular Biology (BMA) and Conservation Genetics and Breeding (COMGE) (Bachelor/Degree level). Molecular genetics based on PCR amplification of DNA markers was employed for species identification of 22 seafood products in COMGE and MBTA, and for detection of genetically modified (GM) maize from nine products in BMA. In total six seafood products incorrectly labeled (27%), and two undeclared GM maize (22%) were found. A post-Laboratory survey was applied for assessing the efficacy of the approach for improving motivation in the Laboratory Practices of Genetics. Results confirmed that students that worked on their own samples from local markets were significantly more motivated and better evaluated their Genetic laboratory practices than control students (χ(2)  = 12.11 p = 0.033). Our results suggest that citizen science approaches could not be only useful for improving teaching of Genetics in universities but also to incorporate students and citizens as active agents in food control. © 2016 by The International Union of Biochemistry and Molecular Biology, 44(5):450-462, 2016. © 2016 The International Union of Biochemistry and Molecular Biology.

  12. Does Observed Controlling Teaching Behavior Relate to Students' Motivation in Physical Education?

    Science.gov (United States)

    De Meyer, Jotie; Tallir, Isabel B.; Soenens, Bart; Vansteenkiste, Maarten; Aelterman, Nathalie; Van den Berghe, Lynn; Speleers, Lise; Haerens, Leen

    2014-01-01

    Self-determination theory (SDT) has served as a theoretical framework for considerable research on teaching behavior and student motivation. The majority of studies have focused on need-supportive teaching behavior at the expense of need-thwarting teaching behavior (i.e., the "dark side" of teaching). The goal of the present study was to…

  13. General distributed control system for fusion experiments

    International Nuclear Information System (INIS)

    Klingner, P.L.; Levings, S.J.; Wilkins, R.W.

    1986-01-01

    A general control system using distributed LSI-11 microprocessors is being developed. Common software residues in each LSI-11 and is tailored to an application by control specifications downloaded from a host computer. The microprocessors, their control interfaces, and the micro-to-host communications are CAMAC based. The host computer also supports an operator interface, coordination of multiple microprocessors, and utilities to create and maintain the control specifications. Typical applications include monitoring safety interlocks as well as controlling vacuum systems, high voltage charging systems, and diagnostics

  14. Effectiveness of teaching cognitive-behavioral techniques on locus of control in hemodialysis patients.

    Science.gov (United States)

    Mehrtak, Mohammad; Habibzadeh, Shahram; Farzaneh, Esmaeil; Rjaei-Khiavi, Abdollah

    2017-10-01

    Many of the cognitive behavioral models and therapeutic protocols developed so far for psychological disorders and chronic diseases have proved effective through clinical research. This study aimed to determine the effectiveness of teaching cognitive-behavioral techniques on locus of control in hemodialysis patients. This controlled clinical trial study was conducted in 2015 with 76 patients selected by census and treated with a hemodialysis machine in the dialysis department of Vali-Asr Hospital in the city of Meshkinshahr. A total of four patients were excluded because of their critical conditions while the rest, who were recruited, were randomly divided into two equal groups of 36 patients as the intervention and control groups. First, the locus of control was measured in both groups through a pretest, and cognitive-behavioral techniques were then taught to the intervention group during eight 45 to 90-minute sessions. The locus of control in patients of both groups was finally re-measured through a posttest. Data were collected using Rotter's Locus of Control Inventory. The Wilcoxon test and Mann-Whitney U test were respectively used in SPSS18 for data analysis. In the pretest and posttest stages respectively, 4.8% and 14.3% of samples in the control group as well as 14.3% and 33.3% of samples in the intervention group enjoyed internal locus of control. The difference between the pretest and posttest scores of internal locus of control in the intervention group was significant (p=0.004), which indicates the positive effect of cognitive-behavioral psychotherapeutic intervention on internalization of locus of control in this group. Given the external locus of control in most of the study patients and also the positive significant effect of cognitive-behavioral psychotherapy on internalization of locus of control in this group of patients, it appears necessary to have a psychology resident present in the hemodialysis department to teach the necessary cognitive

  15. Evaluating a Website to Teach Children Safety with Dogs: A Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    David C. Schwebel

    2016-12-01

    Full Text Available Dog bites represent a significant threat to child health. Theory-driven interventions scalable for broad dissemination are sparse. A website was developed to teach children dog safety via increased knowledge, improved cognitive skills in relevant domains, and increased perception of vulnerability to bites. A randomized controlled trial was conducted with 69 children aged 4–5 randomly assigned to use the dog safety website or a control transportation safety website for ~3 weeks. Assessment of dog safety knowledge and behavior plus skill in three relevant cognitive constructs (impulse control, noticing details, and perspective-taking was conducted both at baseline and following website use. The dog safety website incorporated interactive games, instructional videos including testimonials, a motivational rewards system, and messaging to parents concerning child lessons. Our results showed that about two-thirds of the intervention sample was not adherent to website use at home, so both intent-to-treat and per-protocol analyses were conducted. Intent-to-treat analyses yielded mostly null results. Per-protocol analyses suggested children compliant to the intervention protocol scored higher on knowledge and recognition of safe behavior with dogs following the intervention compared to the control group. Adherent children also had improved scores post-intervention on the cognitive skill of noticing details compared to the control group. We concluded that young children’s immature cognition can lead to dog bites. Interactive eHealth training on websites shows potential to teach children relevant cognitive and safety skills to reduce risk. Compliance to website use is a challenge, and some relevant cognitive skills (e.g., noticing details may be more amenable to computer-based training than others (e.g., impulse control.

  16. QFT Based Robust Positioning Control of the PMSM Using Automatic Loop Shaping with Teaching Learning Optimization

    Directory of Open Access Journals (Sweden)

    Nitish Katal

    2016-01-01

    Full Text Available Automation of the robust control system synthesis for uncertain systems is of great practical interest. In this paper, the loop shaping step for synthesizing quantitative feedback theory (QFT based controller for a two-phase permanent magnet stepper motor (PMSM has been automated using teaching learning-based optimization (TLBO algorithm. The QFT controller design problem has been posed as an optimization problem and TLBO algorithm has been used to minimize the proposed cost function. This facilitates designing low-order fixed-structure controller, eliminates the need of manual loop shaping step on the Nichols charts, and prevents the overdesign of the controller. A performance comparison of the designed controller has been made with the classical PID tuning method of Ziegler-Nichols and QFT controller tuned using other optimization algorithms. The simulation results show that the designed QFT controller using TLBO offers robust stability, disturbance rejection, and proper reference tracking over a range of PMSM’s parametric uncertainties as compared to the classical design techniques.

  17. Applying team-based learning of diagnostics for undergraduate students: assessing teaching effectiveness by a randomized controlled trial study.

    Science.gov (United States)

    Zeng, Rui; Xiang, Lian-Rui; Zeng, Jing; Zuo, Chuan

    2017-01-01

    We aimed to introduce team-based learning (TBL) as one of the teaching methods for diagnostics and to compare its teaching effectiveness with that of the traditional teaching methods. We conducted a randomized controlled trial on diagnostics teaching involving 111 third-year medical undergraduates, using TBL as the experimental intervention, compared with lecture-based learning as the control, for teaching the two topics of symptomatology. Individual Readiness Assurance Test (IRAT)-baseline and Group Readiness Assurance Test (GRAT) were performed in members of each TBL subgroup. The scores in Individual Terminal Test 1 (ITT1) immediately after class and Individual Terminal Test 2 (ITT2) 1 week later were compared between the two groups. The questionnaire and interview were also implemented to survey the attitude of students and teachers toward TBL. There was no significant difference between the two groups in ITT1 (19.85±4.20 vs 19.70±4.61), while the score of the TBL group was significantly higher than that of the control group in ITT2 (19.15±3.93 vs 17.46±4.65). In the TBL group, the scores of the two terminal tests after the teaching intervention were significantly higher than the baseline test score of individuals. IRAT-baseline, ITT1, and ITT2 scores of students at different academic levels in the TBL teaching exhibited significant differences, but the ITT1-IRAT-baseline and ITT2-IRAT-baseline indicated no significant differences among the three subgroups. Our TBL in symptomatology approach was highly accepted by students in the improvement of interest and self-directed learning and resulted in an increase in knowledge acquirements, which significantly improved short-term test scores compared with lecture-based learning. TBL is regarded as an effective teaching method worthy of promoting.

  18. Distributed Microprocessor Automation Network for Synthesizing Radiotracers Used in Positron Emission Tomography [PET

    Science.gov (United States)

    Russell, J. A. G.; Alexoff, D. L.; Wolf, A. P.

    1984-09-01

    This presentation describes an evolving distributed microprocessor network for automating the routine production synthesis of radiotracers used in Positron Emission Tomography. We first present a brief overview of the PET method for measuring biological function, and then outline the general procedure for producing a radiotracer. The paper identifies several reasons for our automating the syntheses of these compounds. There is a description of the distributed microprocessor network architecture chosen and the rationale for that choice. Finally, we speculate about how this network may be exploited to extend the power of the PET method from the large university or National Laboratory to the biomedical research and clinical community at large. (DT)

  19. Optimization of Reciprocals and Square Roots on the i860 Microprocessor

    DEFF Research Database (Denmark)

    Sinclair, Robert

    1996-01-01

    The i860 microprocessor lacks both a divide and a square root instruction. The consequences of this for code involving many reciprocal square roots, such as many-body simulations involving Coulomb-like potentials, are discussed with a particular emphasis on high performance.......The i860 microprocessor lacks both a divide and a square root instruction. The consequences of this for code involving many reciprocal square roots, such as many-body simulations involving Coulomb-like potentials, are discussed with a particular emphasis on high performance....

  20. Neutron beam irradiation study of workload dependence of SER in a microprocessor

    Energy Technology Data Exchange (ETDEWEB)

    Michalak, Sarah E [Los Alamos National Laboratory; Graves, Todd L [Los Alamos National Laboratory; Hong, Ted [STANFORD; Ackaret, Jerry [IBM; Sonny, Rao [IBM; Subhasish, Mitra [STANFORD; Pia, Sanda [IBM

    2009-01-01

    It is known that workloads are an important factor in soft error rates (SER), but it is proving difficult to find differentiating workloads for microprocessors. We have performed neutron beam irradiation studies of a commercial microprocessor under a wide variety of workload conditions from idle, performing no operations, to very busy workloads resembling real HPC, graphics, and business applications. There is evidence that the mean times to first indication of failure, MTFIF defined in Section II, may be different for some of the applications.

  1. Distributed microprocessor automation network for synthesizing radiotracers used in positron emission tomography

    International Nuclear Information System (INIS)

    Russell, J.A.G.; Alexoff, D.L.; Wolf, A.P.

    1984-01-01

    This presentation describes an evolving distributed microprocessor network for automating the routine production synthesis of radiotracers used in Positron Emission Tomography. We first present a brief overview of the PET method for measuring biological function, and then outline the general procedure for producing a radiotracer. The paper identifies several reasons for our automating the syntheses of these compounds. There is a description of the distributed microprocessor network architecture chosen and the rationale for that choice. Finally, we speculate about how this network may be exploited to extend the power of the PET method from the large university or National Laboratory to the biomedical research and clinical community at large. 20 refs. (DT)

  2. Contribution to the automatic command in robotics - Application to the command by microprocessors of the articulated systems

    International Nuclear Information System (INIS)

    Al Mouhamed, Mayez

    1982-01-01

    The first part of the present paper deals with the main methods of changing the coordinates for a general articulated system. After a definition of the coordinates changing, we propose a coordination system designed for easy programming of the movements. Its characteristic is to permit the action anywhere on the manipulated object. The second part deals with the force regulation problem. For this purpose we have developed a general force sensor. The informations delivered by the sensor are used by force regulators which are intended for the automatic assembly of subsystems. In the third part the dynamic problem of the articulated systems is exposed. We present a new method which allows to determine dynamic parameters from appropriate motions of the robot. These parameters are then used to implement the dynamic control. Several applications, using the powerful microprocessor INTEL 8086 and its arithmetic coprocessor 8087, are presented, in order to demonstrate the performances gained. (author) [fr

  3. Design of Smart Educational Robot as a Tool For Teaching Media Based on Contextual Teaching and Learning to Improve the Skill of Electrical Engineering Student

    Science.gov (United States)

    Zuhrie, M. S.; Basuki, I.; Asto, B. I. G. P.; Anifah, L.

    2018-04-01

    The development of robotics in Indonesia has been very encouraging. The barometer is the success of the Indonesian Robot Contest. The focus of research is a teaching module manufacturing, planning mechanical design, control system through microprocessor technology and maneuverability of the robot. Contextual Teaching and Learning (CTL) strategy is the concept of learning where the teacher brings the real world into the classroom and encourage students to make connections between knowledge possessed by its application in everyday life. This research the development model used is the 4-D model. This Model consists of four stages: Define Stage, Design Stage, Develop Stage, and Disseminate Stage. This research was conducted by applying the research design development with the aim to produce a tool of learning in the form of smart educational robot modules and kit based on Contextual Teaching and Learning at the Department of Electrical Engineering to improve the skills of the Electrical Engineering student. Socialization questionnaires showed that levels of the student majoring in electrical engineering competencies image currently only limited to conventional machines. The average assessment is 3.34 validator included in either category. Modules developed can give hope to the future are able to produce Intelligent Robot Tool for Teaching.

  4. Reliability of microprocessor-based relay protection devices: Myths and reality

    Directory of Open Access Journals (Sweden)

    Gurevich Vladimir

    2009-01-01

    Full Text Available The article examines four basic theses about the ostensibly extremely high reliability of microprocessor-based relay protection (MP touted by supporters of MP. Through detailed analysis based on many references it is shown that the basis of these theses are widespread myths, and actually MP reliability is lower than the reliability of electromechanical and electronic protective relays on discrete components.

  5. Design of microprocessor data acquisition system for pedestrian portal SNM monitor

    International Nuclear Information System (INIS)

    Zhang Wenliang

    2003-01-01

    The paper introduces the hardware structure and composition of data acquisition system for pedestrian portal special nuclear material (SNM) monitor. The hardware and software of single chip microprocessor AT89C52, LCM, keyboard and serial communication interface software are also discussed. (authors)

  6. A CAMAC-resident microprocessor for the monitoring of polarimeter spin states

    International Nuclear Information System (INIS)

    Reid, D.; DuPlantis, D.; Yoder, N.; Dale, D.

    1992-01-01

    A CAMAC module for the reporting of polarimeter spin states is being developed using a resident microcontroller. The module will allow experimenters at the Indiana University Cyclotron Facility to monitor spin states and correlate spin information with other experimental data. The use of a microprocessor allows for adaptation of the module as new requirements ensue without change to the printed circuit board layout. (author)

  7. The design of an asynchronous Tiny RISC TM/TR4101 microprocessor core

    DEFF Research Database (Denmark)

    Christensen, Kåre Tais; Jensen, P.; Korger, P.

    1998-01-01

    This paper presents the design of an asynchronous version of the TR4101 embedded microprocessor core developed by LSI Logic Inc. The asynchronous processor, called ARISC, was designed using the same CAD tools and the same standard cell library that was used to implement the TR4101. The paper repo...

  8. Architectural and compiler techniques for energy reduction in high-performance microprocessors

    Science.gov (United States)

    Bellas, Nikolaos

    1999-11-01

    The microprocessor industry has started viewing power, along with area and performance, as a decisive design factor in today's microprocessors. The increasing cost of packaging and cooling systems poses stringent requirements on the maximum allowable power dissipation. Most of the research in recent years has focused on the circuit, gate, and register-transfer (RT) levels of the design. In this research, we focus on the software running on a microprocessor and we view the program as a power consumer. Our work concentrates on the role of the compiler in the construction of "power-efficient" code, and especially its interaction with the hardware so that unnecessary processor activity is saved. We propose techniques that use extra hardware features and compiler-driven code transformations that specifically target activity reduction in certain parts of the CPU which are known to be large power and energy consumers. Design for low power/energy at this level of abstraction entails larger energy gains than in the lower stages of the design hierarchy in which the design team has already made the most important design commitments. The role of the compiler in generating code which exploits the processor organization is also fundamental in energy minimization. Hence, we propose a hardware/software co-design paradigm, and we show what code transformations are necessary by the compiler so that "wasted" power in a modern microprocessor can be trimmed. More specifically, we propose a technique that uses an additional mini cache located between the instruction cache (I-Cache) and the CPU core; the mini cache buffers instructions that are nested within loops and are continuously fetched from the I-Cache. This mechanism can create very substantial energy savings, since the I-Cache unit is one of the main power consumers in most of today's high-performance microprocessors. Results are reported for the SPEC95 benchmarks in the R-4400 processor which implements the MIPS2 instruction

  9. Brief Report: Pilot Randomized Controlled Trial of Reciprocal Imitation Training for Teaching Elicited and Spontaneous Imitation to Children with Autism

    Science.gov (United States)

    Ingersoll, Brooke

    2010-01-01

    Children with autism exhibit significant deficits in imitation skills. Reciprocal Imitation Training (RIT), a naturalistic imitation intervention, was developed to teach young children with autism to imitate during play. This study used a randomized controlled trial to evaluate the efficacy of RIT on elicited and spontaneous imitation skills in 21…

  10. Single-Event Upset and Scaling Trends in New Generation of the Commercial SOI PowerPC Microprocessors

    Science.gov (United States)

    Irom, Farokh; Farmanesh, Farhad; Kouba, Coy K.

    2006-01-01

    Single-event upset effects from heavy ions are measured for Motorola silicon-on-insulator (SOI) microprocessor with 90 nm feature sizes. The results are compared with previous results for SOI microprocessors with feature sizes of 130 and 180 nm. The cross section of the 90 nm SOI processors is smaller than results for 130 and 180 nm counterparts, but the threshold is about the same. The scaling of the cross section with reduction of feature size and core voltage for SOI microprocessors is discussed.

  11. Continuous subcutaneous insulin infusion (CSII) therapy at Derby Teaching Hospitals: sustained benefits in glucose control.

    Science.gov (United States)

    Anyanwagu, U; Olaoye, H; Jennings, P; Ashton-Cleary, S; Sugunendran, S; Hughes, D; Idris, I; Wilmot, E G

    2017-08-01

    In the short term, continuous subcutaneous insulin infusion (CSII) has been associated with improved glycaemic control, reduced hypoglycaemia and improved quality of life (QOL). However, limited data are available on its long-term benefits, particularly in the UK. We aimed to assess the impact of CSII on longer term outcomes. Patient-level data were obtained for CSII users at Derby Teaching Hospitals, UK. Patient confidence and satisfaction questionnaires using the Likert scale were used to assess confidence in self-management. Comparative statistics were conducted using Pearson's chi-square and Student's t-tests. Some 258 CSII users were identified (60.1% female, mean age 43.9 ± 13.4 years). Overall, there was significant decrease in HbA 1c from 78 mmol/mol (9.3 ± 2.0%) at baseline, to 69 mmol/mol (8.5 ± 1.3%) at 6 months [mean difference (md): -0.64; 95% confidence interval (95% CI): -0.91 to -0.37; P quality of care received in the insulin pump service. CSII therapy led to a sustained long-term improvement in glycaemic control in addition to a reduction in self-reported hypoglycaemia. © 2017 Diabetes UK.

  12. A survey of infection control practices of consultant anaesthesiologists in teaching hospitals of pakistan

    International Nuclear Information System (INIS)

    Yaqub, K.M.; Tariq, M.; Janjua, S.; Masroor, R.

    2007-01-01

    To determine the infection control practices of Anaesthesiologist in the teaching hospitals of Pakistan. Cross-sectional survey. The survey was closed after allowing 6 months for return of the replies. A questionnaire was distributed to 170 consultant anaesthesiologist randomly selected from all over Pakistan. Out of these, 90 (53%) were returned and analyzed. To reduce self-report bias, the forms were filled anonymously. Thirty four percent of the respondents always used masks, and only 9% used gloves in their every day practice. Only 18% of respondents stated that they always washed their hands after every patient contact and 54% reported that they always used aseptic technique for placing an indwelling cannula. Most respondents had a good knowledge of universal precautions for prevention of occupational transmission of infection. Five percent of the anaesthetists reported frequently or always reusing syringes for more than one patient. The practice of reusing syringes was significantly greater when the same consultants were anaesthetizing patients in private clinics rather than in their primary institutions (p 5, in 58% of cases. Whereas most responding anaesthesiologist exhibit appropriate infection control behaviour, there are several potentially hazardous practices that continue unabated. (author)

  13. Evaluation of an active learning module to teach hazard and risk in Hazard Analysis and Critical Control Points (HACCP) classes.

    Science.gov (United States)

    Oyarzabal, Omar A; Rowe, Ellen

    2017-04-01

    The terms hazard and risk are significant building blocks for the organization of risk-based food safety plans. Unfortunately, these terms are not clear for some personnel working in food manufacturing facilities. In addition, there are few examples of active learning modules for teaching adult participants the principles of hazard analysis and critical control points (HACCP). In this study, we evaluated the effectiveness of an active learning module to teach hazard and risk to participants of HACCP classes provided by the University of Vermont Extension in 2015 and 2016. This interactive module is comprised of a questionnaire; group playing of a dice game that we have previously introduced in the teaching of HACCP; the discussion of the terms hazard and risk; and a self-assessment questionnaire to evaluate the teaching of hazard and risk. From 71 adult participants that completed this module, 40 participants (56%) provided the most appropriate definition of hazard, 19 participants (27%) provided the most appropriate definition of risk, 14 participants (20%) provided the most appropriate definitions of both hazard and risk, and 23 participants (32%) did not provide an appropriate definition for hazard or risk. Self-assessment data showed an improvement in the understanding of these terms (P active learning modules to teach food safety classes. This study suggests that active learning helps food personnel better understand important food safety terms that serve as building blocks for the understanding of more complex food safety topics.

  14. Applying team-based learning of diagnostics for undergraduate students: assessing teaching effectiveness by a randomized controlled trial study

    Directory of Open Access Journals (Sweden)

    Zeng R

    2017-03-01

    Full Text Available Rui Zeng,1,* Lian-rui Xiang,2,* Jing Zeng,3 Chuan Zuo4 1Department of Cardiovascular Diseases, 2Department of Public Affairs Development, 3Department of Internal Medicine, 4Department of Rheumatology and Immunology, West China Hospital, School of Clinic Medicine, Sichuan University, Chengdu, People’s Republic of China *These authors contributed equally to this work Background: We aimed to introduce team-based learning (TBL as one of the teaching methods for diagnostics and to compare its teaching effectiveness with that of the traditional teaching methods.Methods: We conducted a randomized controlled trial on diagnostics teaching involving 111 third-year medical undergraduates, using TBL as the experimental intervention, compared with lecture-based learning as the control, for teaching the two topics of symptomatology. Individual Readiness Assurance Test (IRAT-baseline and Group Readiness Assurance Test (GRAT were performed in members of each TBL subgroup. The scores in Individual Terminal Test 1 (ITT1 immediately after class and Individual Terminal Test 2 (ITT2 1 week later were compared between the two groups. The questionnaire and interview were also implemented to survey the attitude of students and teachers toward TBL.Results: There was no significant difference between the two groups in ITT1 (19.85±4.20 vs 19.70±4.61, while the score of the TBL group was significantly higher than that of the control group in ITT2 (19.15±3.93 vs 17.46±4.65. In the TBL group, the scores of the two terminal tests after the teaching intervention were significantly higher than the baseline test score of individuals. IRAT-baseline, ITT1, and ITT2 scores of students at different academic levels in the TBL teaching exhibited significant differences, but the ITT1-IRAT-baseline and ITT2-IRAT-baseline indicated no significant differences among the three subgroups.Conclusion: Our TBL in symptomatology approach was highly accepted by students in the improvement

  15. Crime and Control: Syllabi and Instructional Materials for Criminology and Criminal Justice. Resource Materials for Teaching.

    Science.gov (United States)

    Deutschmann, Linda B., Ed.; Wright, Richard A., Ed.

    One of a series of resources for teaching sociology at the postsecondary level, this volume contains syllabi and instructional materials for courses in criminology and criminal justice. Material is divided into four sections. Section 1, innovative approaches to the teaching of criminology, contains four papers which discuss a corrections practicum…

  16. Computer-based teaching is as good as face to face lecture-based teaching of evidence based medicine: a randomised controlled trial

    Science.gov (United States)

    2007-01-01

    Background At postgraduate level evidence based medicine (EBM) is currently taught through tutor based lectures. Computer based sessions fit around doctors' workloads, and standardise the quality of educational provision. There have been no randomized controlled trials comparing computer based sessions with traditional lectures at postgraduate level within medicine. Methods This was a randomised controlled trial involving six postgraduate education centres in the West Midlands, U.K. Fifty five newly qualified foundation year one doctors (U.S internship equivalent) were randomised to either computer based sessions or an equivalent lecture in EBM and systematic reviews. The change from pre to post-intervention score was measured using a validated questionnaire assessing knowledge (primary outcome) and attitudes (secondary outcome). Results Both groups were similar at baseline. Participants' improvement in knowledge in the computer based group was equivalent to the lecture based group (gain in score: 2.1 [S.D = 2.0] versus 1.9 [S.D = 2.4]; ANCOVA p = 0.078). Attitudinal gains were similar in both groups. Conclusion On the basis of our findings we feel computer based teaching and learning is as effective as typical lecture based teaching sessions for educating postgraduates in EBM and systematic reviews. PMID:17659076

  17. 15 CFR 744.17 - Restrictions on certain exports and reexports of general purpose microprocessors for “military...

    Science.gov (United States)

    2010-01-01

    ... reexports of general purpose microprocessors for âmilitary end-usesâ and to âmilitary end-users.â 744.17...: END-USER AND END-USE BASED § 744.17 Restrictions on certain exports and reexports of general purpose microprocessors for “military end-uses” and to “military end-users.” (a) General prohibition. In addition to the...

  18. Tests of microprocessor-based relay protection devices: Problems and solutions

    Directory of Open Access Journals (Sweden)

    Gurevich Vladimir

    2009-01-01

    Full Text Available Usually, the operational condition of relay protection devices is checked with specific settings used for the relay operation in a certain network point. In the author's opinion in order to verify the proper operation of complex multifunctional microprocessor-based protection devices (MPD at their inspection, start-up after repairs or during periodic tests there is no need to use the actual settings at which the relay is to be operated in a certain network's point. It should be tested for proper operation at several of its most critical preset characteristic points as well as in several preset characteristics constituting its most complicated (combined operation modes, including the dynamic operation modes with preset transition processes specific for standard power networks (not necessarily for a specific point. The proposed set of actions for the unification of software platforms of the modern, microprocessor-based relay protection test systems will enable examination of modern MPD in an absolutely new way. .

  19. Sectional microprocessor based microcomputer and its application to express analysis using interactive language

    International Nuclear Information System (INIS)

    Lang, I.; Leveleki, L.; Salai, M.; Turani, D.

    1984-01-01

    Sectional microprocessor TPA-L/128H based mini-computer being a part of the TPA-8 computer family is developed. A substantial increase of the computer operation rate is attained at the expense of microprogram monitoring. The central processor is constructed on the base of the AM2900 sectional microprocessor elements. The TPA-L/128H computer is program compatible with TPA-8 computer, perfectly equipped with software: high level languages as well as OS/L, COS/H, RTS/H, PAL/128, WPS, TEASYS-8 and IL 128 ensuring statistical data processing, physical experiments automation and interactive experimental data processing. The real time basis problems and CAMAC devices monitoring are efficiently solved

  20. Failure analysis on false call probe pins of microprocessor test equipment

    Science.gov (United States)

    Tang, L. W.; Ong, N. R.; Mohamad, I. S. B.; Alcain, J. B.; Retnasamy, V.

    2017-09-01

    A study has been conducted to investigate failure analysis on probe pins of test modules for microprocessor. The `health condition' of the probe pin is determined by the resistance value. A test module of 5V power supplied from Arduino UNO with "Four-wire Ohm measurement" method is implemented in this study to measure the resistance of the probe pins of a microprocessor. The probe pins from a scrapped computer motherboard is used as the test sample in this study. The functionality of the test module was validated with the pre-measurement experiment via VEE Pro software. Lastly, the experimental work have demonstrated that the implemented test module have the capability to identify the probe pin's `health condition' based on the measured resistance value.

  1. Sub-50 nm gate length SOI transistor development for high performance microprocessors

    International Nuclear Information System (INIS)

    Horstmann, M.; Greenlaw, D.; Feudel, Th.; Wei, A.; Frohberg, K.; Burbach, G.; Gerhardt, M.; Lenski, M.; Stephan, R.; Wieczorek, K.; Schaller, M.; Hohage, J.; Ruelke, H.; Klais, J.; Huebler, P.; Luning, S.; Bentum, R. van; Grasshoff, G.; Schwan, C.; Cheek, J.; Buller, J.; Krishnan, S.; Raab, M.; Kepler, N.

    2004-01-01

    Partial depleted (PD) SOI technologies have reached maturity for production of high speed, low power microprocessors. The paper will highlight several challenges found during the course of development for bringing 40 nm gate length (L GATE ) PD SOI transistors into volume manufacturing for high-speed microprocessors. The key innovations developed for this transistor in order to overcome classical gate oxide and L GATE scaling is an unique differential triple spacer structure, stressed overlayer films inducing strain in the Silicon channel and optimized junctions. This transistor structure yields an outstanding ring oscillator speed with an unloaded inverter delay of 5.5 ps. The found improvements are highly manufacturable and scaleable for future device technologies like FD SOI

  2. 'Beyond Milestones': a randomised controlled trial evaluating an innovative digital resource teaching quality observation of normal child development.

    Science.gov (United States)

    Connolly, Anne M; Cunningham, Clare; Sinclair, Adriane J; Rao, Arjun; Lonergan, Amy; Bye, Ann M E

    2014-05-01

    The study aimed to create and evaluate the educational effectiveness of a digital resource instructing paediatric trainees in a systematic approach to critical and quality observation of normal child development. A digital educational resource was developed utilising the skills of an expert developmental paediatrician who was videoed assessing normal early child development at a series of critical stages. Videos illustrated aspects of language, sophistication of play and socialisation, cognition, and motor progress. Expert commentary, teaching text and summaries were used. A randomised controlled trial evaluated the resource. Paediatric trainees were recruited from The Sydney Children's Hospitals Network. Outcome measures were repeated at three time points (pre-teaching, immediate-post and 1 month) and included self-rated attitudes, knowledge of markers of development and observational expertise. Qualitative data on teaching usefulness were obtained through open-ended questions. Fifty-six paediatric trainees (registrar 79%, women 82%; mean age 31 years) completed the pre-assessment, 46 the immediate-post and 45 the 1-month follow-up (20% attrition). Compared with the Control group, the Teaching group scored higher over time on markers of development (P = 0.006), observational expertise (P improves knowledge, increases confidence and is useful, providing a structured approach to developmental assessment. The techniques taught can be applied to every paediatric consultation. © 2013 The Authors. Journal of Paediatrics and Child Health © 2013 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  3. LSI microprocessor circuit families based on integrated injection logic. Mikroprotsessornyye komplekty bis na osnove integral'noy inzhektsionnoy logiki

    Energy Technology Data Exchange (ETDEWEB)

    Borisov, V.S.; Vlasov, F.S.; Kaloshkin, E.P.; Serzhanovich, D.S.; Sukhoparov, A.I.

    1984-01-01

    Progress in developing microprocessor computer hardware is based on progress and improvement in systems engineering, circuit engineering and manufacturing process methods of design and development of large-scale integrated circuits (BIS). Development of these methods with widespread use of computer-aided design (CAD) systems has allowed developing 4- and 8-bit microprocessor families (MPK) of LSI circuits based on integrated injection logic (I/sup 2/L), characterized by relatively high speed and low dissipated power. The emergence of LSI and VLSI microprocessor circuits required computer system developers to make changes to theory and practice of computer system design. Progress in technology upset the established relation between hardware and software component development costs in systems being designed. A characteristic feature of using LSI circuits is also the necessity of building devices from standard modules with large functional complexity. The existing directions of forming compositions of LSI microprocessor families allow the system developer to choose a particular methodology of design, proceeding from the efficiency function and field of application of the system being designed. The efficiency of using microprocessor families is largely governed by the user's understanding in depth of the structure of LSI microprocessor family circuits and the features of using them to implement a broad class of computer devices and modules being developed. This book is devoted to solving this problem.

  4. Use of a Microprocessor to Implement an ADCCP Protocol (Federal Standard 1003).

    Science.gov (United States)

    1980-07-01

    results of other studies, to evaluate the operational and economic impact of incorporating various options in Federal Standard 1003. The effort...the LSI interface and the microprocessor; the LSI chip deposits bytes in its buffer as the producer, and the MPU reads this data as the consumer...on the interface between the MPU and the LSI protocol chip. This requires two main processes to be running at the same time--transmit and receive. The

  5. MONICA - a programmable microprocessor for track recognition in an e+e- experiment at PETRA

    International Nuclear Information System (INIS)

    Schildt, P.; Stuckenberg, H.J.; Wermes, N.

    1981-01-01

    The microprocessor device MONICA is used in the TASSO experiment at PETRA. Its task is to reconstruct events in the cylindrical driftchamber on-line. Used as an event filter MONICA provides a 2 prong trigger without any further requirements. The speed of the processor (event reconstruction times must be in the order of 1 ms) is achieved by a 4 x 4 bit slice processor in ECL technology, content addressable memories and table look up. The track finding efficiency is 80%. (orig.)

  6. A fail-safe microprocessor-based protection system utilising low-level multiplexed sensor signals

    International Nuclear Information System (INIS)

    Orme, S.; Evans, N.J.; Wey, B.O.

    1985-01-01

    The paper describes a fail-safe reactor protection system, called the individual sub-assembly temperature monitoring system (ISAT). It is being developed for the commercial demonstration fast reactor. The system incorporates recent advances in solid-state electronics and in particular microprocessors to implement time-shared data acquisition techniques to obtain and process data from around 1400 fast response thermocouples whilst meeting the required levels for reliability and availability. (author)

  7. API testing program - calibration of microprocessor based flowmeters for integrated metering systems

    Energy Technology Data Exchange (ETDEWEB)

    Elliot, Kenneth D. [Omni Flow Computers, Inc., Stafford, TX (United States)

    2005-07-01

    Microprocessor based flowmeter technologies for liquids, such as Coriolis mass meters, and Ultrasonic flowmeters hold great promise. These technologies offer many advantages, such as no rotating parts, self-diagnostic checks, which can help anticipate and warn of impending failures before they have a major impact on the measurement. These meters are substantially different though than other primary devices due to their heavy reliance on the accompanying secondary electronics. One method to prove that they are accurate would be proving the flowmeter, using a pipe prover or small volume prover (SVP), but these proving methods are designed to count 'real time' pulses from a turbine or PD meter between a known volume, they are not designed to count 'time delayed' 'manufactured pulses' from a microprocessor. There are limitations of the manufactured pulse train and it affects the ability of the flowmeter to be proved using current proving technology. The author of this paper, a chairman of an American Petroleum Institute working group, investigated how the 'microprocessor generated pulses' produced by these types of flowmeters, interacted with the existing measurement technologies in use today. Several microprocessor based flowmeter technologies have been tested, including; Ultrasonic, Coriolis, and Helical Turbine with pulse multiplying preamplifier. Wherever possible, flowmeters of various sizes, and from several vendors have been tested. A significant amount of data has been collected which sheds light into why these types of flowmeters are sometimes difficult to prove. This paper describes the API testing program, and the methodology behind it. It presents results and findings, and offers specific recommendations that may eventually be incorporated into API documents and/or standards in the future. (author)

  8. Software support for Motorola 68000 microprocessor at CERN. M68MIL cross macro assembler

    International Nuclear Information System (INIS)

    Eicken, H. von.

    1983-01-01

    This document is a user's guide for programming the Motorola 68000 microprocessor in assembly language. It describes the programming model, addressing modes and instruction set of the M 68000 as well as the use of the M68mil cross macro assembler. Version 3.6 of the assembler has been installed at CERN on CDC, DEC VAX, IBM, Norsk Data and Siemens computers. The source code of the assembler is available from CERN on request. (orig.)

  9. A monitoring and protective system for mine hoists using a microprocessor

    Energy Technology Data Exchange (ETDEWEB)

    Jianlin, Zhu

    1981-11-01

    In view of the existing problems of depth indicators and tachometers currently used in mine hoists, a measuring technique using a 'wire cable magnetic stripe' and a tentative proposal for a monitoring system with a microprocessor are described. The system can be used for measuring and indicating the depth, speed of the hoisting system, and can provide protection against overwinding, overspeeding and slack rope as well as monitoring the direction of hoisting. (In Chinese)

  10. Data acquisition and processing system of energy dispersive X-ray spectrometer with microprocessor

    International Nuclear Information System (INIS)

    Horkay, G.; Kis-Varga, M.; Lakatos, T.; Molnar, J.; Zsurzs, M.

    1984-01-01

    For quantitative analysis of chemical elements by the method of X-ray spectroscopy a multichannel analyzer on the base of minicomputer with the INTEL 8080 A microprocessor is developed. The data acquisition and data processing systems which comprise a central processor, memory unit, ADC and display are described. Major system subprograms are enumerated. An example of Pb concentration determinating in a bronze specimen is given

  11. An Asynchronous Circuit Design Technique for a Flexible 8-Bit Microprocessor

    Science.gov (United States)

    Karaki, Nobuo; Nanmoto, Takashi; Inoue, Satoshi

    This paper presents an asynchronous design technique, an enabler for the emerging technology of flexible microelectronics that feature low-temperature processed polysilicon (LTPS) thin-film transistors (TFT) and surface-free technology by laser annealing/ablation (SUFTLA®). The first design instance chosen is an 8-bit microprocessor. LTPS TFTs are good for realizing displays having integrated VLSI circuit at lower costs. However, LTPS TFTs have drawbacks, including substantial deviations in characteristics and the self-heating phenomenon. To solve these problems, the authors adopted the asynchronous circuit design technique and developed an asynchronous design language called Verilog+, which is based on a subset of Verilog HDL® and includes minimal primitives used for describing the communications between modules, and the dedicated tools including a translator called xlator and a synthesizer called ctrlsyn. The flexible 8-bit microprocessor stably operates at 500kHz, drawing 180μA from a 5V power source. The microprocessor's electromagnetic emissions are 21dB less than those of the synchronous counterpart.

  12. Updated teaching techniques improve CPR performance measures: a cluster randomized, controlled trial.

    Science.gov (United States)

    Ettl, Florian; Testori, Christoph; Weiser, Christoph; Fleischhackl, Sabine; Mayer-Stickler, Monika; Herkner, Harald; Schreiber, Wolfgang; Fleischhackl, Roman

    2011-06-01

    The first-aid training necessary for obtaining a drivers license in Austria has a regulated and predefined curriculum but has been targeted for the implementation of a new course structure with less theoretical input, repetitive training in cardiopulmonary resuscitation (CPR) and structured presentations using innovative media. The standard and a new course design were compared with a prospective, participant- and observer-blinded, cluster-randomized controlled study. Six months after the initial training, we evaluated the confidence of the 66 participants in their skills, CPR effectiveness parameters and correctness of their actions. The median self-confidence was significantly higher in the interventional group [IG, visual analogue scale (VAS:"0" not-confident at all,"100" highly confident):57] than in the control group (CG, VAS:41). The mean chest compression rate in the IG (98/min) was closer to the recommended 100 bpm than in the CG (110/min). The time to the first chest compression (IG:25s, CG:36s) and time to first defibrillator shock (IG:86s, CG:92s) were significantly shorter in the IG. Furthermore, the IG participants were safer in their handling of the defibrillator and started with countermeasures against developing shock more often. The management of an unconscious person and of heavy bleeding did not show a difference between the two groups even after shortening the lecture time. Motivation and self-confidence as well as skill retention after six months were shown to be dependent on the teaching methods and the time for practical training. Courses may be reorganized and content rescheduled, even within predefined curricula, to improve course outcomes. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  13. A randomized control trial comparing use of a novel electrocardiogram simulator with traditional teaching in the acquisition of electrocardiogram interpretation skill.

    Science.gov (United States)

    Fent, Graham; Gosai, Jivendra; Purva, Makani

    2016-01-01

    Accurate interpretation of the electrocardiogram (ECG) remains an essential skill for medical students and junior doctors. While many techniques for teaching ECG interpretation are described, no single method has been shown to be superior. This randomized control trial is the first to investigate whether teaching ECG interpretation using a computer simulator program or traditional teaching leads to improved scores in a test of ECG interpretation among medical students and postgraduate doctors immediately after and 3months following teaching. Participants' opinions of the program were assessed using a questionnaire. There were no differences in ECG interpretation test scores immediately after or 3months after teaching in the lecture or simulator groups. At present therefore, there is insufficient evidence to suggest that ECG simulator programs are superior to traditional teaching. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. An advanced teaching scheme for integrating problem-based learning in control education

    Science.gov (United States)

    Juuso, Esko K.

    2018-03-01

    Engineering education needs to provide both theoretical knowledge and problem-solving skills. Many topics can be presented in lectures and computer exercises are good tools in teaching the skills. Learning by doing is combined with lectures to provide additional material and perspectives. The teaching scheme includes lectures, computer exercises, case studies, seminars and reports organized as a problem-based learning process. In the gradually refining learning material, each teaching method has its own role. The scheme, which has been used in teaching two 4th year courses, is beneficial for overall learning progress, especially in bilingual courses. The students become familiar with new perspectives and are ready to use the course material in application projects.

  15. Impact of postgraduate training on communication skills teaching: a controlled study

    OpenAIRE

    Junod Perron, N.; Nendaz, M.; Louis-Simonet, M.; Sommer, J.; Gut, A.; Cerutti, B.; Vleuten, C.P.M. van der; Dolmans, D.

    2014-01-01

    BACKGROUND: Observation of performance followed by feedback is the key to good teaching of communication skills in clinical practice. The fact that it occurs rarely is probably due to clinical supervisors' perceived lack of competence to identify communication skills and give effective feedback. We evaluated the impact of a faculty development programme on communication skills teaching on clinical supervisors' ability to identify residents' good and poor communication skills and to discuss th...

  16. Using an ACTIVE teaching format versus a standard lecture format for increasing resident interaction and knowledge achievement during noon conference: a prospective, controlled study

    Science.gov (United States)

    2014-01-01

    Background The traditional lecture is used by many residency programs to fulfill the mandate for regular didactic sessions, despite limited evidence to demonstrate its effectiveness. Active teaching strategies have shown promise in improving medical knowledge but have been challenging to implement within the constraints of residency training. We developed and evaluated an innovative structured format for interactive teaching within the residency noon conference. Methods We developed an ACTIVE teaching format structured around the following steps: assemble (A) into groups, convey (C) learning objectives, teach (T) background information, inquire (I) through cases and questions, verify (V) understanding, and explain (E) answer choices and educate on the learning points. We conducted a prospective, controlled study of the ACTIVE teaching format versus the standard lecture format, comparing resident satisfaction, immediate knowledge achievement and long-term knowledge retention. We qualitatively assessed participating faculty members’ perspectives on the faculty development efforts and the feasibility of teaching using the ACTIVE format. Results Sixty-nine internal medicine residents participated in the study. Overall, there was an improvement in perceived engagement using the ACTIVE teaching format (4.78 vs. 3.80, P teaching format (overall absolute score increase of 11%, P = 0.04) and a trend toward improvement in long-term knowledge retention. Faculty members felt adequately prepared to use the ACTIVE teaching format, and enjoyed teaching with the ACTIVE teaching format more than the standard lecture. Conclusions A structured ACTIVE teaching format improved resident engagement and initial knowledge, and required minimal resources. The ACTIVE teaching format offers an exciting alternative to the standard lecture for resident noon conference and is easy to implement. PMID:24985781

  17. An atlas of artefacts: a teaching tool for scintillation camera quality control

    International Nuclear Information System (INIS)

    Busemann Sokole, E.; Graham, L.S.; Todd-Pokropek, A.; Wegst, A.; Robilotta, C.C.

    2002-01-01

    . Because subtle loss of image quality is difficult to detect in SPECT images, simulations have been included that demonstrate effects of sub-optimal calibrations (e.g. centre-of-rotation offset, non-uniformity) or sub-optimal clinical situations. Conclusions: This artefact atlas covers many different situations and variants that may be encountered. It is intended as a teaching tool to help identify artefacts in quality control and clinical images. Regular updates are essential. The IAEA intends to produce a hardcopy of this artefact atlas, and eventually make it available on CD-ROM. The author and editor (EBS) is indebted to all those who submitted images and contributed to the review process

  18. MFTF supervisory control and diagnostics system hardware

    International Nuclear Information System (INIS)

    Butner, D.N.

    1979-01-01

    The Supervisory Control and Diagnostics System (SCDS) for the Mirror Fusion Test Facility (MFTF) is a multiprocessor minicomputer system designed so that for most single-point failures, the hardware may be quickly reconfigured to provide continued operation of the experiment. The system is made up of nine Perkin-Elmer computers - a mixture of 8/32's and 7/32's. Each computer has ports on a shared memory system consisting of two independent shared memory modules. Each processor can signal other processors through hardware external to the shared memory. The system communicates with the Local Control and Instrumentation System, which consists of approximately 65 microprocessors. Each of the six system processors has facilities for communicating with a group of microprocessors; the groups consist of from four to 24 microprocessors. There are hardware switches so that if an SCDS processor communicating with a group of microprocessors fails, another SCDS processor takes over the communication

  19. A microprocessor from AVR to embedded SoC

    International Nuclear Information System (INIS)

    Jeong, Geum Seoh

    2005-01-01

    This book was divided into two parts. The first part consists of ten chapter, which are basic knowledge, code vision AVR compiler, analysis on code vision, introduction and characteristic of AVR, I/O ports, interrupt and timer/counter, LCD, serial communication, analog comparator and stepping Motor and digital control of DC Motor. In the second part, it introduces Embedded Soc including application field, its characteristic, general description, functional description, designs with Quartus II.

  20. Control of a mechanical gripper with a fuzzy controller

    International Nuclear Information System (INIS)

    Alberdi, J.; Barcala, J.M.; Gamero, E.; Navarrete, J.J.

    1995-01-01

    A fuzzy logic system is used to control a mechanical gripper. System is based in a NLX230 fuzzy micro controller. Control rules are programmed by a 68020 microprocessor in the micro controller memory. Stress and its derived are used as feedback signals in the control. This system can adapt its effort to the mechanical resistance of the object between the fingers. (Author)

  1. Evaluation of an active learning module to teach hazard and risk in Hazard Analysis and Critical Control Points (HACCP classes

    Directory of Open Access Journals (Sweden)

    Omar A. Oyarzabal

    2017-04-01

    Full Text Available The terms hazard and risk are significant building blocks for the organization of risk-based food safety plans. Unfortunately, these terms are not clear for some personnel working in food manufacturing facilities. In addition, there are few examples of active learning modules for teaching adult participants the principles of hazard analysis and critical control points (HACCP. In this study, we evaluated the effectiveness of an active learning module to teach hazard and risk to participants of HACCP classes provided by the University of Vermont Extension in 2015 and 2016. This interactive module is comprised of a questionnaire; group playing of a dice game that we have previously introduced in the teaching of HACCP; the discussion of the terms hazard and risk; and a self-assessment questionnaire to evaluate the teaching of hazard and risk. From 71 adult participants that completed this module, 40 participants (56% provided the most appropriate definition of hazard, 19 participants (27% provided the most appropriate definition of risk, 14 participants (20% provided the most appropriate definitions of both hazard and risk, and 23 participants (32% did not provide an appropriate definition for hazard or risk. Self-assessment data showed an improvement in the understanding of these terms (P < 0.05. Thirty participants (42% stated that the most valuable thing they learned with this interactive module was the difference between hazard and risk, and 40 participants (65% responded that they did not attend similar presentations in the past. The fact that less than one third of the participants answered properly to the definitions of hazard and risk at baseline is not surprising. However, these results highlight the need for the incorporation of modules to discuss these important food safety terms and include more active learning modules to teach food safety classes. This study suggests that active learning helps food personnel better understand important

  2. A Microprocessor Development System for the ALTOS Series Microcomputers.

    Science.gov (United States)

    1981-06-01

    location, and 3) routines for online user self-help and system use instructions. The primary ccnsideration in the desin of the HOST control program was...TO LOWER CASE CPI ;rYNAMIC SET ITEMIZE JZ MAKEI CPI Vt" ;LYNAMIC SET TOTAL ONLY JZ MAKET CPI "e JNZ STACKIT ;RESTART TEST IF NOT E MEM55 LXI HMEMM...RESET STACK JMP MEM0I ;RESTART TEST MAKEI MVI All ;MAKE ITEMIZE STA MEMP CALL BSOUT RET MAKET MJI A,O ;MAKE TOTAL ONLY STA MEMP CALL BSOUT RET * LONE WITH

  3. Evaluation guidelines for microprocessor-based systems important to safety

    International Nuclear Information System (INIS)

    Adams, D.M.; Svoboda, J.M.

    1983-01-01

    Proposed criteria for the application of stored-program, digital computers in commercial nuclear power plants are presented in summary form. The emphasis is on making recommendations for the design of computer systems and on recommending a method for the regulatory review of computer system designs. More-restrictive requirements are made for protection systems than control systems or other plant computer systems. In making these recommendations, the study team reviewed current regulations, past NRC reviews of computer systems, the work done by other government agencies, and the work done by many other countries. The results provide a classification of systems, a recommended design method, and a specification of design issues to be resolved during the design and development of digital computer systems

  4. Fast, microprocessor driven, data acquisition for Fermilab Experiment E-705

    International Nuclear Information System (INIS)

    Conetti, S.; Haire, M.; Kuchela, K.

    1985-01-01

    Data rate in excess of 10 5 16-bit CAMAC words/sec, with peak rates of up to 2X10 6 words/sec, are expected from Fermilab experiment E-705. To handle such rate, a fast Data Acquisition System was designed, composed of several CAMAC Smart Controllers, sending their data, in a combined serial/parallel organization, to a VME based data collection and forwarding system. Such a system, contained in a VME Crate, consists of homebuilt data receiver and transmitter boards, a Motorola VME-110, 68000 based, Single Board Computer acting as a supervisor, and a large (greater than or equal to4 Mbytes) buffer memory. Data filtering capabilities will be added to the system with the inclusion of several MK 75602 Single Board Computers, acting as processing cells

  5. Teaching Parents about Responsive Feeding through a Vicarious Learning Video: A Pilot Randomized Controlled Trial

    Science.gov (United States)

    Ledoux, Tracey; Robinson, Jessica; Baranowski, Tom; O'Connor, Daniel P.

    2018-01-01

    The American Academy of Pediatrics and World Health Organization recommend responsive feeding (RF) to promote healthy eating behaviors in early childhood. This project developed and tested a vicarious learning video to teach parents RF practices. A RF vicarious learning video was developed using community-based participatory research methods.…

  6. Teaching parents about responsive feeding through a vicarious learning video: A pilot randomized controlled trial

    Science.gov (United States)

    The American Academy of Pediatrics and World Health Organization recommend responsive feeding (RF) to promote healthy eating behaviors in early childhood. This project developed and tested a vicarious learning video to teach parents RF practices. A RF vicarious learning video was developed using com...

  7. A New Approach in Teaching Power Electronics Control of Electrical Drives using Real-Time

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Bech, Michael Møller; Blaabjerg, Frede

    2000-01-01

    A new approach in teaching power electronics and electrical drives is achieved at the Flexible Drives System Laboratory (FDSL) from Aalborg University by using the new Total Development Environment (TDE) concept that allows a full visual block-oriented programming of dynamic real-time systems...

  8. Impact of postgraduate training on communication skills teaching: a controlled study

    NARCIS (Netherlands)

    Junod Perron, N.; Nendaz, M.; Louis-Simonet, M.; Sommer, J.; Gut, A.; Cerutti, B.; Vleuten, C.P.M. van der; Dolmans, D.

    2014-01-01

    BACKGROUND: Observation of performance followed by feedback is the key to good teaching of communication skills in clinical practice. The fact that it occurs rarely is probably due to clinical supervisors' perceived lack of competence to identify communication skills and give effective feedback. We

  9. Set problem teaching methods used in the course of Control and protection systems of nuclear reactors

    International Nuclear Information System (INIS)

    Korolev, V.V.

    1995-01-01

    Some results of pedagogical investigations on the application of the sep problem teaching method at the Obninsk Institute of Nuclear Power Engineering are presented. The method aims at improving the quality of training operation and maintenance personnel for nuclear power plants

  10. A microprocessor-based gamma-ray spectrometer with gain stabilized single-channel analyzers

    International Nuclear Information System (INIS)

    Borg, P.J.; Huppert, P.; Phillips, P.L.; Waddington, P.J.

    1985-01-01

    The design and performance of a self-contained microprocessor-based gamma-ray spectrometer for use in geophysical measurements using nuclear techniques is described. The instrument uses single-channel analyzers which are inherently simpler and faster than the Wilkinson or successive approximation ADC. A novel technique of gain stabilization together with a simple means of energy calibration has been developed. The modular design of the equipment makes it suitable for multidetector usage, required in a number of nucleonic gauges for the quantitative measurement of chemical constituents. (orig.)

  11. Software support for Motorola 68000 microprocessor at CERN. CERN convention for programming the MC68000 family

    International Nuclear Information System (INIS)

    Cailliau, R.; Carpenter, B.

    1984-01-01

    The CERN convention for programming the MC68000 family of microprocessors gives a set of rules describing the layout of the memory and stack frames used by routines as they should appear before and after their calling sequences. It does not deal with the instructions used to achieve these states. The aim of the convention is to allow programming language mixing as well as debugging of programs built from units written in different languages. It is to be followed by programmers and programming-language compilers. (orig.)

  12. Experience in installing a microprocessor-based protection system on a UK nuclear power plant

    International Nuclear Information System (INIS)

    Jones, C.D.; Smith, I.C.

    1993-01-01

    This paper describes a recently completed project to install a microprocessor-based reactor protection system on a twin reactor station in the United Kingdom. This represented the first application of digital technology as part of such a system in the UK. The background of the application and details of the chosen solution are provided. The experience gained during the installation, commissioning and early operation of the equipment is reviewed by the operators. Interactions between the utility and the regulatory body are outlined and the impact of the regulatory process on the utility's resources and the project timescales are discussed

  13. Wide-bandwidth low-voltage PLL for powerPC(sup TM) microprocessors

    Science.gov (United States)

    Alvarez, Jose; Sanchez, Hector; Gerosa, Gianfranco; Countryman, Roger

    1995-04-01

    A 3.3 V Phase-Locked-Loop (PLL) clock synthesizer implemented in 0.5 micron CMOS technology is described. The PLL supports internal to external clock frequency ratios of 1, 1.5, 2, 3, and 4 as well as numerous static power down modes for PowerPC(sup TM) microprocessors. The CPU clock lock range spans from 6 to 175 MHz. Lock times below 15 mu s, PLL power dissipation below 10mW as well as phase error and jitter below +/- 100 ps have been measured. The total area of the PLL is 0.52 mm(exp 2).

  14. A high resolution wire scanner beam profile monitor with a microprocessor data acquisition system

    International Nuclear Information System (INIS)

    Cutler, R.I.; Mohr, D.L.; Whittaker, J.K.; Yoder, N.R.

    1983-01-01

    A beam profile monitor has been constructed for the NBS-LANL Racetrack Microtron. The monitor consists of two perpendicular 30 μm diameter carbon wires that are driven through an electron beam by a pneumatic actuator. A long-lifetime, electroformed nickel bellows is used for the linear-motion vacuum feedthrough. Secondary emission current from the wires and a signal from a transducer measuring the position of the wires are simultaneously digitized by a microprocessor to yield beam current density profiles in two dimensions. The wire scanner is designed for use with both pulsed and cw beams

  15. Do Three-dimensional Visualization and Three-dimensional Printing Improve Hepatic Segment Anatomy Teaching? A Randomized Controlled Study.

    Science.gov (United States)

    Kong, Xiangxue; Nie, Lanying; Zhang, Huijian; Wang, Zhanglin; Ye, Qiang; Tang, Lei; Li, Jianyi; Huang, Wenhua

    2016-01-01

    Hepatic segment anatomy is difficult for medical students to learn. Three-dimensional visualization (3DV) is a useful tool in anatomy teaching, but current models do not capture haptic qualities. However, three-dimensional printing (3DP) can produce highly accurate complex physical models. Therefore, in this study we aimed to develop a novel 3DP hepatic segment model and compare the teaching effectiveness of a 3DV model, a 3DP model, and a traditional anatomical atlas. A healthy candidate (female, 50-years old) was recruited and scanned with computed tomography. After three-dimensional (3D) reconstruction, the computed 3D images of the hepatic structures were obtained. The parenchyma model was divided into 8 hepatic segments to produce the 3DV hepatic segment model. The computed 3DP model was designed by removing the surrounding parenchyma and leaving the segmental partitions. Then, 6 experts evaluated the 3DV and 3DP models using a 5-point Likert scale. A randomized controlled trial was conducted to evaluate the educational effectiveness of these models compared with that of the traditional anatomical atlas. The 3DP model successfully displayed the hepatic segment structures with partitions. All experts agreed or strongly agreed that the 3D models provided good realism for anatomical instruction, with no significant differences between the 3DV and 3DP models in each index (p > 0.05). Additionally, the teaching effects show that the 3DV and 3DP models were significantly better than traditional anatomical atlas in the first and second examinations (p < 0.05). Between the first and second examinations, only the traditional method group had significant declines (p < 0.05). A novel 3DP hepatic segment model was successfully developed. Both the 3DV and 3DP models could improve anatomy teaching significantly. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  16. Microprocessors & their operating systems a comprehensive guide to 8, 16 & 32 bit hardware, assembly language & computer architecture

    CERN Document Server

    Holland, R C

    1989-01-01

    Provides a comprehensive guide to all of the major microprocessor families (8, 16 and 32 bit). The hardware aspects and software implications are described, giving the reader an overall understanding of microcomputer architectures. The internal processor operation of each microprocessor device is presented, followed by descriptions of the instruction set and applications for the device. Software considerations are expanded with descriptions and examples of the main high level programming languages (BASIC, Pascal and C). The book also includes detailed descriptions of the three main operatin

  17. Generic device controller for accelerator control systems

    International Nuclear Information System (INIS)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01

    Distributed intelligence for accelerator control systems has become possible as a result of advances in microprocessor technology. A system based on distributed intelligence is inherently versatile, readily expandable, and reduces both information flow across the system and software complexity in each unit

  18. Video- or text-based e-learning when teaching clinical procedures? A randomized controlled trial.

    Science.gov (United States)

    Buch, Steen Vigh; Treschow, Frederik Philip; Svendsen, Jesper Brink; Worm, Bjarne Skjødt

    2014-01-01

    This study investigated the effectiveness of two different levels of e-learning when teaching clinical skills to medical students. Sixty medical students were included and randomized into two comparable groups. The groups were given either a video- or text/picture-based e-learning module and subsequently underwent both theoretical and practical examination. A follow-up test was performed 1 month later. The students in the video group performed better than the illustrated text-based group in the practical examination, both in the primary test (Pvideo group performed better on the follow-up test (P=0.04). Video-based e-learning is superior to illustrated text-based e-learning when teaching certain practical clinical skills.

  19. A microprocessor based exchange data collection and analysis terminal application to A.E.A. PABX

    International Nuclear Information System (INIS)

    Mohammed, F.A.; Ezzat, A.K.; Ayad, N.M.A.

    1978-01-01

    The traffic data acquisition and analysis comprises micro-processer based data collection, terminals (MBDCT) and a centralized computer. The MBDCT's can communicate with the computer through a data set system. Each (MBDCT) remote terminal is connected to about two hundreds subscriber lines. It scans the trunk lines to detect the on/off hook states and to calculate the call time and the called number. If the called subscriber is not from the 200 local lines, its status should be detected though the computer communication with the two terminals. The data collected by the terminal can be slightly analysed using the microprocessor programming capability. More-over short quality performance reports can be printed on a printer interfaced to the microprocessor. Also, data can be transmitted to the central computer for further data traffic investigation. The analysis outcome can be utilized for telephone line maintenance and reorganization. This report is concerned with the terminal details as applied to the A-E-A. PABX. It consists mainly of five external lines and about 300 internal lines

  20. Electric protections based in microprocessors in power plants; Protecciones electricas basadas en microprocesadores en centrales generadoras

    Energy Technology Data Exchange (ETDEWEB)

    Libreros, Domitilo; Castanon Jimenez, Jose Ismael [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    This article is centered around the substitution of the conventional electric protections of a power plant in connection type unit for protections based in microprocessors. A general model of conventional protection of a power plant is described and the number of analogic and digital signals that intervene in that model are quantified. A model is setup for power plant protection with microprocessors, analyzing each one of the modules that would form it. Finally, the algorithms to carry on such protection are presented. [Espanol] Este articulo se centra en torno a la sustitucion de las protecciones electricas convencionales de una central generadora en conexion tipo unidad por protecciones basadas en microprocesadores. Se describe el modelo general de proteccion convencional de una central generadora y se cuantifica el numero de senales analogicas y digitales que interviene en dicho modelo. Se propone un modelo para proteccion de centrales generadoras mediante microprocesadores, analizandose cada uno de los modulos que lo conformarian. Finalmente, se presentan los algoritmos para realizar dicha proteccion.

  1. Electric protections based in microprocessors in power plants; Protecciones electricas basadas en microprocesadores en centrales generadoras

    Energy Technology Data Exchange (ETDEWEB)

    Libreros, Domitilo; Castanon Jimenez, Jose Ismael [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    This article is centered around the substitution of the conventional electric protections of a power plant in connection type unit for protections based in microprocessors. A general model of conventional protection of a power plant is described and the number of analogic and digital signals that intervene in that model are quantified. A model is setup for power plant protection with microprocessors, analyzing each one of the modules that would form it. Finally, the algorithms to carry on such protection are presented. [Espanol] Este articulo se centra en torno a la sustitucion de las protecciones electricas convencionales de una central generadora en conexion tipo unidad por protecciones basadas en microprocesadores. Se describe el modelo general de proteccion convencional de una central generadora y se cuantifica el numero de senales analogicas y digitales que interviene en dicho modelo. Se propone un modelo para proteccion de centrales generadoras mediante microprocesadores, analizandose cada uno de los modulos que lo conformarian. Finalmente, se presentan los algoritmos para realizar dicha proteccion.

  2. A gesture-controlled Serious Game for teaching emotion recognition skills to preschoolers with autism

    OpenAIRE

    Christinaki, Eirini; Triantafyllidis, Georgios; Vidakis, Nikolaos

    2013-01-01

    The recognition of facial expressions is important for the perception of emotions. Understanding emotions is essential in human communication and social interaction. Children with autism have been reported to exhibit deficits in the recognition of affective expressions. With the appropriate intervention, elimination of those deficits can be achieved. Interventions are proposed to start as early as possible. Computer-based programs have been widely used with success to teach people with autism...

  3. User's guide for the portable microprocessor equipment: 'KfK K-edge densitometer' for quantitative determination of Th, U, Np, Pu, Am in solutions

    International Nuclear Information System (INIS)

    Michel-Piper, I.; Matussek, P.

    1985-06-01

    This report describes the hardware and software features, and the use of the microprocessor-controlled multichannel analyzer system SILENA + IRIS. The self-contained portable system, which permits independent accumulation and evaluation of spectral data from the KfK K-edge densitometer, provides one of the possible means for the authentication of resident instruments by safeguards inspectors. The 'K-Edge' program, written in PL/M language for compatibility with the system's firmware, allows fully automated assays of heavy element concentrations in solutions by means of X-ray absorption edge spectrometry. It is primarily intended for highly accurate determinations of the U and Pu content in process- and product solutions of a reprocessing plant. (orig.)

  4. Control of the Tevatron Satellite Refrigeration system

    International Nuclear Information System (INIS)

    Theilacker, J.; Chapman, L.; Gannon, J.; Hentges, M.; Martin, M.; Rode, C.H.; Zagel, J.

    1984-01-01

    This chapter describes a computerized control system for 24 satellite refrigerators which cool a six kilometer ring of superconducting magnets. The control system consists of 31 independent microprocessors operating over 400 servo loops, and a central computer system which provides monitoring, alarms, logging and changing of parameters. Topics considered include pressure measurement, flow measurement, temperature measurement, gas analysis, control valves, expansion engine controllers, and control loops. Each refrigerator has 12 active microprocessor based control loops which tune the refrigerator to one of its four operating modes: satellite, liquefier, refrigerator, and stand-by. It is suggested that optimizing the refrigerator control loops and quench recovery scheme will minimize the accelerator down time

  5. Expression levels of the microRNA maturing microprocessor complex component DGCR8 and the RNA-induced silencing complex (RISC) components argonaute-1, argonaute-2, PACT, TARBP1, and TARBP2 in epithelial skin cancer.

    Science.gov (United States)

    Sand, Michael; Skrygan, Marina; Georgas, Dimitrios; Arenz, Christoph; Gambichler, Thilo; Sand, Daniel; Altmeyer, Peter; Bechara, Falk G

    2012-11-01

    The microprocessor complex mediates intranuclear biogenesis of precursor microRNAs from the primary microRNA transcript. Extranuclear, mature microRNAs are incorporated into the RNA-induced silencing complex (RISC) before interaction with complementary target mRNA leads to transcriptional repression or cleavage. In this study, we investigated the expression profiles of the microprocessor complex subunit DiGeorge syndrome critical region gene 8 (DGCR8) and the RISC components argonaute-1 (AGO1), argonaute-2 (AGO2), as well as double-stranded RNA-binding proteins PACT, TARBP1, and TARBP2 in epithelial skin cancer and its premalignant stage. Patients with premalignant actinic keratoses (AK, n = 6), basal cell carcinomas (BCC, n = 15), and squamous cell carcinomas (SCC, n = 7) were included in the study. Punch biopsies were harvested from the center of the tumors (lesional), from healthy skin sites (intraindividual controls), and from healthy skin sites in a healthy control group (n = 16; interindividual control). The DGCR8, AGO1, AGO2, PACT, TARBP1, and TARBP2 mRNA expression levels were detected by quantitative real-time reverse transcriptase polymerase chain reaction. The DGCR8, AGO1, AGO2, PACT, and TARBP1 expression levels were significantly higher in the AK, BCC, and SCC groups than the healthy controls (P  0.05). This study indicates that major components of the miRNA pathway, such as the microprocessor complex and RISC, are dysregulated in epithelial skin cancer. Copyright © 2011 Wiley Periodicals, Inc.

  6. Control of a mechanical gripper with a fuzzy controller; Control de una garra robotizada mediante un controlador borroso

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J.; Barcala, J.M.; Gamero, E.; Navarrete, J.J.

    1995-07-01

    A fuzzy logic system is used to control a mechanical gripper. System is based in a NLX230 fuzzy micro controller. Control rules are programmed by a 68020 microprocessor in the micro controller memory. Stress and its derived are used as feedback signals in the control. This system can adapt its effort to the mechanical resistance of the object between the fingers.

  7. Control of a mechanical gripper with a fuzzy controller; Control de una garra robotizada mediante un controlador borroso

    Energy Technology Data Exchange (ETDEWEB)

    Alberdi, J.; Barcala, J.M.; Gamero, E.; Navarrete, J.J.

    1995-07-01

    A fuzzy logic system is used to control a mechanical gripper. System is based in a NLX230 fuzzy micro controller. Control rules are programmed by a 68020 microprocessor in the micro controller memory. Stress and its derived are used as feedback signals in the control. This system can adapt its effort to the mechanical resistance of the object between the fingers. (Author)

  8. Teaching emotion recognition skills to young children with autism: a randomised controlled trial of an emotion training programme.

    Science.gov (United States)

    Williams, Beth T; Gray, Kylie M; Tonge, Bruce J

    2012-12-01

    Children with autism have difficulties in emotion recognition and a number of interventions have been designed to target these problems. However, few emotion training interventions have been trialled with young children with autism and co-morbid ID. This study aimed to evaluate the efficacy of an emotion training programme for a group of young children with autism with a range of intellectual ability. Participants were 55 children with autistic disorder, aged 4-7 years (FSIQ 42-107). Children were randomly assigned to an intervention (n = 28) or control group (n = 27). Participants in the intervention group watched a DVD designed to teach emotion recognition skills to children with autism (the Transporters), whereas the control group watched a DVD of Thomas the Tank Engine. Participants were assessed on their ability to complete basic emotion recognition tasks, mindreading and theory of mind (TOM) tasks before and after the 4-week intervention period, and at 3-month follow-up. Analyses controlled for the effect of chronological age, verbal intelligence, gender and DVD viewing time on outcomes. Children in the intervention group showed improved performance in the recognition of anger compared with the control group, with few improvements maintained at 3-month follow-up. There was no generalisation of skills to TOM or social skills. The Transporters programme showed limited efficacy in teaching basic emotion recognition skills to young children with autism with a lower range of cognitive ability. Improvements were limited to the recognition of expressions of anger, with poor maintenance of these skills at follow-up. These findings provide limited support for the efficacy of the Transporters programme for young children with autism of a lower cognitive range. © 2012 The Authors. Journal of Child Psychology and Psychiatry © 2012 Association for Child and Adolescent Mental Health.

  9. Teaching Teaching & Understanding Understanding

    DEFF Research Database (Denmark)

    2006-01-01

    "Teaching Teaching & Understanding Understanding" is a 19-minute award-winning short-film about teaching at university and higher-level educational institutions. It is based on the "Constructive Alignment" theory developed by Prof. John Biggs. The film delivers a foundation for understanding what...

  10. Stability of nano-fluids and their use for thermal management of a microprocessor: an experimental and numerical study

    Science.gov (United States)

    Shoukat, Ahmad Adnan; Shaban, Muhammad; Israr, Asif; Shah, Owaisur Rahman; Khan, Muhammad Zubair; Anwar, Muhammad

    2018-03-01

    We investigate the heat transfer effect of different types of Nano-fluids on the pin fin heat sinks used in computer's microprocessor. Nano-particles of Aluminum oxide have been used with volumetric concentrations of 0.002% and Silver oxide with volumetric concentrations of 0.001% in the base fluid of deionized water. We have also used Aluminum oxide with ethylene glycol at volumetric concentrations of 0.002%. We report the cooling rates of Nano-fluids for pin-fin heat to cool the microprocessor and compare these with the cooling rate of pure water. We use a microprocessor heat generator in this investigation. The base temperature is obtained using surface heater of power 130 W. The main purpose of this work is to minimize the base temperature, and increase the heat transfer rate of the water block and radiator. The temperature of the heat sink is maintained at 110 °C which is nearly equal to the observed computer microprocessor temperature. We also provide the base temperature at different Reynolds's number using the above mention Nano-fluids with different volumetric concentrations.

  11. Video- or text-based e-learning when teaching clinical procedures? A randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Buch SV

    2014-08-01

    Full Text Available Steen Vigh Buch,1 Frederik Philip Treschow,2 Jesper Brink Svendsen,3 Bjarne Skjødt Worm4 1Department of Vascular Surgery, Rigshospitalet, Copenhagen, Denmark; 2Department of Anesthesia and Intensive Care, Herlev Hospital, Copenhagen, Denmark; 3Faculty of Health and Medical Sciences, University of Copenhagen, Copenhagen, Denmark; 4Department of Anesthesia and Intensive Care, Bispebjerg Hospital, Copenhagen, Denmark Background and aims: This study investigated the effectiveness of two different levels of e-learning when teaching clinical skills to medical students. Materials and methods: Sixty medical students were included and randomized into two comparable groups. The groups were given either a video- or text/picture-based e-learning module and subsequently underwent both theoretical and practical examination. A follow-up test was performed 1 month later. Results: The students in the video group performed better than the illustrated text-based group in the practical examination, both in the primary test (P<0.001 and in the follow-up test (P<0.01. Regarding theoretical knowledge, no differences were found between the groups on the primary test, though the video group performed better on the follow-up test (P=0.04. Conclusion: Video-based e-learning is superior to illustrated text-based e-learning when teaching certain practical clinical skills. Keywords: e-learning, video versus text, medicine, clinical skills

  12. A Randomized Controlled Trial of Video Education versus Skill Demonstration: Which Is More Effective in Teaching Sterile Surgical Technique?

    Science.gov (United States)

    Pilieci, Stephanie N; Salim, Saad Y; Heffernan, Daithi S; Itani, Kamal M F; Khadaroo, Rachel G

    2018-04-01

    Video education has many advantages over traditional education including efficiency, convenience, and individualized learning. Learning sterile surgical technique (SST) is imperative for medical students, because proper technique helps prevent surgical site infections (SSIs). We hypothesize that video education is at least as effective as traditional skill demonstration in teaching first-year medical students SST. A video series was created to demonstrate SST ( https://www.youtube.com/playlist?list=PLcRU-gvOmxE2mwMWkowouBkxGXkLZ8Uis ). A randomized controlled trial was designed to assess which education method best teaches SST: video education or skill demonstration. First-year medical students (n = 129) were consented and randomly assigned into two groups: those who attended a skill demonstration (control group; n = 70) and those who watched the video series (experimental group; n = 59). The control group attended a pre-existing 90-minute nurse educator-led skill demonstration. Participants then completed a 30-item multiple choice quiz to test their knowledge. Each group then received the alternate education method and completed a 23-item follow-up survey to determine their preferred method. Seven 2- to 6-minute videos (30 minutes total) were created on surgical attire, scrubbing, gowning and gloving, and maintaining sterility. The experimental group (n = 51) scored higher on the quiz compared with the control group (n = 63) (88% ± 1% versus 72% ± 1%; p < 0.0001). Students preferred the videos when it came to convenience, accessibility, efficiency, and review, and preferred the skill demonstration when it came to knowledge retention, preparedness, and ease of completion. Video education is superior to traditional skill demonstration in providing medical students with knowledge of SST. Students identified strengths to each method of teaching. Video education can augment medical students' knowledge prior to their operating room

  13. Development of a Self-Balancing Human Transportation Vehicle for the Teaching of Feedback Control

    Science.gov (United States)

    Lin, Shui-Chun; Tsai, Ching-Chih

    2009-01-01

    Control systems education often needs to design interesting hands-on exercises that keep students interested in the control theory presented in lectures. These exercises include system modeling, system analyses, controller syntheses, implementation, experimentation, and performance evaluation of a control system. This paper presents an interesting…

  14. Automatic control of movable detectors

    International Nuclear Information System (INIS)

    Wassel, W.W.; Remley, G.W.

    1980-01-01

    An invention is described, relating to a microprocessor based control system for a plurality of movable detectors, e.g. a nuclear reactor flux mapping system, with new system architecture which increases system availability by preventing faults on any of the detection channels from disabling the remaining channels. The system has, say, four drive trains for a number of detectors. Functional separation is realized by having two channels control their associated two drive trains. Redundancy is provided by having dual channels for operator interface. Communications between the functionally separate channels is accomplished by employing two-ported memories in conjunction with multiple microprocessors. (author)

  15. Advanced Transport Operating System (ATOPS) color displays software description microprocessor system

    Science.gov (United States)

    Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

    1992-01-01

    This document describes the software created for the Sperry Microprocessor Color Display System used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global reference section includes procedures and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight cathode ray tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

  16. Microprocessor-based, on-line decision aid for resolving conflicting nuclear reactor instrumentation

    International Nuclear Information System (INIS)

    Alesso, H.P.

    1981-01-01

    We describe one design for a microprocessor-based, on-line decision aid for identifying and resolving false, conflicting, or misleading instrument indications resulting from certain systems interactions for a pressurized water reactor. The system processes sensor signals from groups of instruments that track together under nominal transient and certain accident conditions, and alarms when they do not track together. We examine multiple-casualty systems interaction and formulate a trial grouping of variables that track together under specified conditions. A two-of-three type redundancy check of key variables provides alarm and indication of conflicting information when one signal suddenly tracks in opposition due to multiple casualty, instrument failure, and/or locally abnormal conditions. Since a vote count of two of three variables in conflict as inconclusive evidence, the system is not designed to provide tripping or corrective action, but improves the operator/instrument interface by providing additional and partially digested information

  17. Advances in Sensors-Centric Microprocessors and System-on-Chip

    Directory of Open Access Journals (Sweden)

    Juan A. Gómez-Pulido

    2012-04-01

    Full Text Available Sensors-based systems are nowadays an extended technology for many markets due to their great potential in the collection of data from the environment and the processing of such data for different purposes. A typical example is the wireless sensor devices, where the outer temperature, humidity, luminosity and many other parameters can be acquired, measured and processed in order to build useful and fascinating applications that contribute to human welfare. In this scenario, the processing architectures of the sensors-based systems play a very important role. The requirements that are necessary for many such applications (real-time processing, low-power consumption, reduced size, reliability, security and many others means that research on advanced architectures of Microprocessors and System-on-Chips (SoC is needed to design and implement a successful product. In this sense, there are many challenges and open questions in this area that need to be addressed. [...

  18. Microprocessor based beam intensity and efficiency display system for the Fermilab accelerator

    International Nuclear Information System (INIS)

    Biwer, R.

    1979-01-01

    The Main Accelerator display system for the Fermilab accelerator gathers charge data and displays it including processed transfer efficiencies of each of the accelerators. To accomplish this, strategically located charge converters monitor the circulating internal beam of each of the Fermilab accelerators. Their outputs are processed via an asynchronously triggered, multiplexed analog-to-digital converter. The data is converted into a digital byte containing address code and data, then stores it into two 16-bit memories. One memory outputs the interleaved data as a data pulse train while the other interfaces directly to a local host computer for further analysis. The microprocessor based display unit synchronizes displayed data during normal operation as well as special storage modes. The display unit outputs data to the fron panel in the form of a numeric value and also makes digital-to-analog conversions of displayed data for external peripheral devices. 5 refs

  19. A Low Cost Matching Motion Estimation Sensor Based on the NIOS II Microprocessor

    Directory of Open Access Journals (Sweden)

    Diego González

    2012-09-01

    Full Text Available This work presents the implementation of a matching-based motion estimation sensor on a Field Programmable Gate Array (FPGA and NIOS II microprocessor applying a C to Hardware (C2H acceleration paradigm. The design, which involves several matching algorithms, is mapped using Very Large Scale Integration (VLSI technology. These algorithms, as well as the hardware implementation, are presented here together with an extensive analysis of the resources needed and the throughput obtained. The developed low-cost system is practical for real-time throughput and reduced power consumption and is useful in robotic applications, such as tracking, navigation using an unmanned vehicle, or as part of a more complex system.

  20. A technique of building a value function at the stage of conceptual design of microprocessor systems

    Directory of Open Access Journals (Sweden)

    B. N. Chugaev

    2017-01-01

    Full Text Available The aim of this study is to formalize the selection of optimal technical solutions early in the design of microprocessor-based systems, which allows developers to analyze the recommended solutions, and has, in comparison with the traditional «intuitive» approach, at least two undeniable merits. First, the accepted assumptions and limitations are clearly formed. Secondly, it is defined precisely, in what sense the decision is optimal. When designing microprocessor systems (systems hereafter, several characteristics have to be taken into account at the same time. In general, when n properties are taken into account for each of the compared systems, then the solution of the task of choosing “the best” system depends on choosing a function-criterion. Such function is called a value function in the article. A simple quadratic function is suggested as the value function, it can be interpreted as the distance in Euclidean space of systems technical data. The system, which corresponds to the point nearest to the point characterizing the master system with “limiting” characteristics, is considered the best one. This function approximates the designer’s system of preferences signifi cantly better than a “classical” linear value function. In conclusion, note that the developed recommendations allow the designer of complex technical systems to analyze the proposed solutions in the early stages of design and, in case of disagreement with them, to indicate the reasons why he considers them inadequate. The designed machine optimization of technical solutions in conjunction with the traditional engineering approach should allow more reasonable choosing the structure of systems at the stage of systems conceptual design.

  1. Peer coaching to teach faculty surgeons an advanced laparoscopic skill: A randomized controlled trial.

    Science.gov (United States)

    Palter, Vanessa N; Beyfuss, Kaitlyn A; Jokhio, Adam R; Ryzynski, Agnes; Ashamalla, Shady

    2016-11-01

    Preliminary evidence suggests that coaching is an effective adjunct in resident training. The learning needs of faculty, however, are different from those of trainees. Assessing the effectiveness of peer coaching at improving the technical proficiency of practicing surgeons is an area that remains largely unexplored. The purpose of this study was to assess the efficacy of a peer coaching program that teaches laparoscopic suturing to faculty surgeons. Surgeons inexperienced in laparoscopic suturing were randomized to either conventional training or peer coaching. Both groups performed a pretest on a box trainer. The conventional training group then received a web link to a tutorial for teaching laparoscopic suturing and a box trainer for independent practice. In addition to the web link and the box trainer, the peer coaching group received 2 half hour peer coaching sessions. Both groups then performed a stitch on the box trainer that was video recorded. The primary outcome measure was technical performance, which was assessed by a global rating scale. Eighteen faculty were randomized (conventional training n = 9; peer coaching n = 9). Initially, there was no difference in technical skills between the groups (conventional training median score 10 [interquartile range 8.5-15]; peer coaching 13 [10.5-14]; P = .64). After the intervention, the peer coaching group had improved technical performance (conventional training 11 [8.5-12.5]; peer coaching 18 [17-19]; P coaching group, yet none in the conventional training group (before conventional training 10 [8.5-15], after conventional training 11 [8.5-12.5]; P = .56; before peer coaching 13 [10.5-14], after peer coaching 18 [17-19]; P coaching program can facilitate faculty surgeons learning a novel procedure. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. The effects of autonomy-supportive and controlling teaching behaviour in biology lessons with primary and secondary experiences on students' intrinsic motivation and flow-experience

    Science.gov (United States)

    Hofferber, Natalia; Basten, Melanie; Großmann, Nadine; Wilde, Matthias

    2016-09-01

    Self-Determination Theory and Flow Theory propose that perceived autonomy fosters the positive qualities of motivation and flow-experience. Autonomy-support can help to maintain students' motivation in very interesting learning activities and may lead to an increase in the positive qualities of motivation in less interesting learning activities. This paper investigates whether autonomy-supportive or controlling teaching behaviour influence students' motivation and flow-experience in biology class. In study 1, 158 students of grade six worked on the adaptations of Harvest Mice (Micromys minutus) with living animals. The 153 sixth graders of study 2 dealt with the same content but instead worked with short films on laptops. Previous studies have shown that students perceive film sequences as less interesting than working with living animals. Students' intrinsic motivation and flow-experience were measured at the end of the first and the third lesson. In study 1, autonomy-supportive teaching behaviour led to significant differences in students' intrinsic motivation and flow-experience when compared to controlling teaching behaviour. In study 2, motivation and flow-experience were not always in line with theory. The positive effects of autonomy-supportive and the non-beneficial effects of the controlling teaching behaviour seem to be dependent on the interestingness of the teaching material.

  3. Microprocessor-controlled step-down maximum-power-point tracker for photovoltaic systems

    Science.gov (United States)

    Mazmuder, R. K.; Haidar, S.

    1992-12-01

    An efficient maximum power point tracker (MPPT) has been developed and can be used with a photovoltaic (PV) array and a load which requires lower voltage than the PV array voltage to be operated. The MPPT makes the PV array to operate at maximum power point (MPP) under all insolation and temperature, which ensures the maximum amount of available PV power to be delivered to the load. The performance of the MPPT has been studied under different insolation levels.

  4. Enhancement of a radiation safety system through the use of a microprocessor-controlled speech synthesizer

    International Nuclear Information System (INIS)

    Keefe, D.J.; McDowell, W.P.

    1980-01-01

    A speech synthesizer is being used to differentiate eight separate safety alarms on a high energy accelerator at Argonne National Laboratory. A single board microcomputer monitors eight signals from an existing radiation safety logic circuit. The microcomputer is programmed to output the proper code at the proper time and sequence to a speech synthesizer which supplies the audio input to a local public address system. This eliminates the requirement for eight different alarm tones and the personnel training required to differentiate among them. A twenty-word vocabulary was found adequate to supply the necessary safety announcements. The article describes the techniques used to interface the speech synthesizer into the existing safety logic circuit

  5. Formation of Orthogonal Controlled Value Components in Micro-Processor Protection of Power Reducing Transformer

    Directory of Open Access Journals (Sweden)

    F. A. Romaniuk

    2012-01-01

    Full Text Available The paper considers formers of orthogonal components of the first, second and fifth current harmonics. The formers are made on the basis of the Goertzel algorithm. The paper also contains investigations of frequency and dynamic properties of these formers.

  6. Towards microprocessor-based control of droplet parameters for endoscopic laryngeal adductor reflex triggering

    Directory of Open Access Journals (Sweden)

    Fast Jacob Friedemann

    2017-09-01

    Full Text Available The so-called Laryngeal Adductor Reflex (LAR protects the respiratory tract from particle intrusion by quickly approximating the vocal folds to close the free glottal space. An impaired LAR may be associated with an increased risk of aspiration and other adverse conditions. To evaluate the integrity of the LAR, we recently developed an endoscopic prototype for LAR triggering by shooting accelerated droplets onto a predefined laryngeal target region. We now modified the existing droplet-dispensing system to adapt the fluid system pressure as well as the valve opening time to user-chosen values autonomously. This has been accomplished using a microcontroller board connected to a pressure sensor and a mechatronic syringe pump. For performance validation, we designed a measurement setup capable of tracking the droplet along a vertical trajectory. In addition to the experimental setup, the influence of parameters such as system pressure and valve opening time on the micro-droplet formation is presented. Further development will enable the physician to adjust the droplet momentum by setting a single input value on the microcontroller-based setup, thus further increasing usability of the diagnostic device.

  7. Using a computer simulation for teaching communication skills: A blinded multisite mixed methods randomized controlled trial.

    Science.gov (United States)

    Kron, Frederick W; Fetters, Michael D; Scerbo, Mark W; White, Casey B; Lypson, Monica L; Padilla, Miguel A; Gliva-McConvey, Gayle A; Belfore, Lee A; West, Temple; Wallace, Amelia M; Guetterman, Timothy C; Schleicher, Lauren S; Kennedy, Rebecca A; Mangrulkar, Rajesh S; Cleary, James F; Marsella, Stacy C; Becker, Daniel M

    2017-04-01

    To assess advanced communication skills among second-year medical students exposed either to a computer simulation (MPathic-VR) featuring virtual humans, or to a multimedia computer-based learning module, and to understand each group's experiences and learning preferences. A single-blinded, mixed methods, randomized, multisite trial compared MPathic-VR (N=210) to computer-based learning (N=211). Primary outcomes: communication scores during repeat interactions with MPathic-VR's intercultural and interprofessional communication scenarios and scores on a subsequent advanced communication skills objective structured clinical examination (OSCE). Multivariate analysis of variance was used to compare outcomes. student attitude surveys and qualitative assessments of their experiences with MPathic-VR or computer-based learning. MPathic-VR-trained students improved their intercultural and interprofessional communication performance between their first and second interactions with each scenario. They also achieved significantly higher composite scores on the OSCE than computer-based learning-trained students. Attitudes and experiences were more positive among students trained with MPathic-VR, who valued its providing immediate feedback, teaching nonverbal communication skills, and preparing them for emotion-charged patient encounters. MPathic-VR was effective in training advanced communication skills and in enabling knowledge transfer into a more realistic clinical situation. MPathic-VR's virtual human simulation offers an effective and engaging means of advanced communication training. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  8. Using a computer simulation for teaching communication skills: A blinded multisite mixed methods randomized controlled trial

    Science.gov (United States)

    Kron, Frederick W.; Fetters, Michael D.; Scerbo, Mark W.; White, Casey B.; Lypson, Monica L.; Padilla, Miguel A.; Gliva-McConvey, Gayle A.; Belfore, Lee A.; West, Temple; Wallace, Amelia M.; Guetterman, Timothy C.; Schleicher, Lauren S.; Kennedy, Rebecca A.; Mangrulkar, Rajesh S.; Cleary, James F.; Marsella, Stacy C.; Becker, Daniel M.

    2016-01-01

    Objectives To assess advanced communication skills among second-year medical students exposed either to a computer simulation (MPathic-VR) featuring virtual humans, or to a multimedia computer-based learning module, and to understand each group’s experiences and learning preferences. Methods A single-blinded, mixed methods, randomized, multisite trial compared MPathic-VR (N=210) to computer-based learning (N=211). Primary outcomes: communication scores during repeat interactions with MPathic-VR’s intercultural and interprofessional communication scenarios and scores on a subsequent advanced communication skills objective structured clinical examination (OSCE). Multivariate analysis of variance was used to compare outcomes. Secondary outcomes: student attitude surveys and qualitative assessments of their experiences with MPathic-VR or computer-based learning. Results MPathic-VR-trained students improved their intercultural and interprofessional communication performance between their first and second interactions with each scenario. They also achieved significantly higher composite scores on the OSCE than computer-based learning-trained students. Attitudes and experiences were more positive among students trained with MPathic-VR, who valued its providing immediate feedback, teaching nonverbal communication skills, and preparing them for emotion-charged patient encounters. Conclusions MPathic-VR was effective in training advanced communication skills and in enabling knowledge transfer into a more realistic clinical situation. Practice Implications MPathic-VR’s virtual human simulation offers an effective and engaging means of advanced communication training. PMID:27939846

  9. Automatic generation control of multi-area power systems with diverse energy sources using Teaching Learning Based Optimization algorithm

    Directory of Open Access Journals (Sweden)

    Rabindra Kumar Sahu

    2016-03-01

    Full Text Available This paper presents the design and analysis of Proportional-Integral-Double Derivative (PIDD controller for Automatic Generation Control (AGC of multi-area power systems with diverse energy sources using Teaching Learning Based Optimization (TLBO algorithm. At first, a two-area reheat thermal power system with appropriate Generation Rate Constraint (GRC is considered. The design problem is formulated as an optimization problem and TLBO is employed to optimize the parameters of the PIDD controller. The superiority of the proposed TLBO based PIDD controller has been demonstrated by comparing the results with recently published optimization technique such as hybrid Firefly Algorithm and Pattern Search (hFA-PS, Firefly Algorithm (FA, Bacteria Foraging Optimization Algorithm (BFOA, Genetic Algorithm (GA and conventional Ziegler Nichols (ZN for the same interconnected power system. Also, the proposed approach has been extended to two-area power system with diverse sources of generation like thermal, hydro, wind and diesel units. The system model includes boiler dynamics, GRC and Governor Dead Band (GDB non-linearity. It is observed from simulation results that the performance of the proposed approach provides better dynamic responses by comparing the results with recently published in the literature. Further, the study is extended to a three unequal-area thermal power system with different controllers in each area and the results are compared with published FA optimized PID controller for the same system under study. Finally, sensitivity analysis is performed by varying the system parameters and operating load conditions in the range of ±25% from their nominal values to test the robustness.

  10. Intelligent multi-unit disk controller

    International Nuclear Information System (INIS)

    Poirot, Lucien

    1982-01-01

    This controller has been designed as a link between a 16 bits minicomputer and two types of disks units interface: the SMD interface and an equivalent to the DRI unit interface. Four units of each type can be handled by the controller. A bit slice microprocessor controls the interface with the disks units. The maximum exchange rate is 8 megabits per second. A CRC feature has been provided for error detection. A 16 bits microprocessor implements the interface to the computer, assuring head positioning, the management of bad tracks, as well as the supervision of each transfer. A internal buffer memory allows an asynchronous dialogue with the computer. The implementation of the controller makes easy the adaptation to disks units of various types, and though it has been initially intended for a minicomputer of the MITRA type, its microprocessor based design makes it fitted to any minicomputer. (author) [fr

  11. Design of Intelligent Robot as A Tool for Teaching Media Based on Computer Interactive Learning and Computer Assisted Learning to Improve the Skill of University Student

    Science.gov (United States)

    Zuhrie, M. S.; Basuki, I.; Asto B, I. G. P.; Anifah, L.

    2018-01-01

    The focus of the research is the teaching module which incorporates manufacturing, planning mechanical designing, controlling system through microprocessor technology and maneuverability of the robot. Computer interactive and computer-assisted learning is strategies that emphasize the use of computers and learning aids (computer assisted learning) in teaching and learning activity. This research applied the 4-D model research and development. The model is suggested by Thiagarajan, et.al (1974). 4-D Model consists of four stages: Define Stage, Design Stage, Develop Stage, and Disseminate Stage. This research was conducted by applying the research design development with an objective to produce a tool of learning in the form of intelligent robot modules and kit based on Computer Interactive Learning and Computer Assisted Learning. From the data of the Indonesia Robot Contest during the period of 2009-2015, it can be seen that the modules that have been developed confirm the fourth stage of the research methods of development; disseminate method. The modules which have been developed for students guide students to produce Intelligent Robot Tool for Teaching Based on Computer Interactive Learning and Computer Assisted Learning. Results of students’ responses also showed a positive feedback to relate to the module of robotics and computer-based interactive learning.

  12. A low-cost computer-controlled Arduino-based educational laboratory system for teaching the fundamentals of photovoltaic cells

    International Nuclear Information System (INIS)

    Zachariadou, K; Yiasemides, K; Trougkakos, N

    2012-01-01

    We present a low-cost, fully computer-controlled, Arduino-based, educational laboratory (SolarInsight) to be used in undergraduate university courses concerned with electrical engineering and physics. The major goal of the system is to provide students with the necessary instrumentation, software tools and methodology in order to learn fundamental concepts of semiconductor physics by exploring the process of an experimental physics inquiry. The system runs under the Windows operating system and is composed of a data acquisition/control board, a power supply and processing boards, sensing elements, a graphical user interface and data analysis software. The data acquisition/control board is based on the Arduino open source electronics prototyping platform. The graphical user interface and communication with the Arduino are developed in C number sign and C++ programming languages respectively, by using IDE Microsoft Visual Studio 2010 Professional, which is freely available to students. Finally, the data analysis is performed by using the open source, object-oriented framework ROOT. Currently the system supports five teaching activities, each one corresponding to an independent tab in the user interface. SolarInsight has been partially developed in the context of a diploma thesis conducted within the Technological Educational Institute of Piraeus under the co-supervision of the Physics and Electronic Computer Systems departments’ academic staff. (paper)

  13. METHODS FOR EVALUATION OF COMPANIES’ INFORMATION SYSTEMS AND TECHNOLOGIES EFFICIENCY AND CONTROL IN TEACHING COURSE "INFORMATION TECHNOLOGY GOVERNANCE"

    Directory of Open Access Journals (Sweden)

    Samchynska Yaroslava

    2014-10-01

    Full Text Available The use of the information systems and technologies in economic activity is called to represent companies’ corporate principles, aims, traditions, to help in realization of the planned strategies, thanks to that the management efficiency and the cost of enterprise increases. Teaching for educational discipline «IT Governance» is directed on a study and research of these intercommunications by students of the 5th course on specialties «Computer Science», «Software Engineering» for educational level Specialist (Past Bachelor Degree, Master degree. The auditing services belong to the actual methods for evaluation of the information systems and technologies efficiency and control, which are studied according to the course «IT Governance». The article deals with the methodological basis of providing auditing services for evaluation of efficiency and control of information systems (technologies for the purpose of satisfaction of growing informational needs of companies and functional activation in their information resources. The main task of auditing services for control of information systems (information communication technologies efficiency is to evaluate independently and objectively if the information technologies provide the necessary services. The basic criteria, data ware, subject and object of audit necessary for drawing up an audit report and assurance declaring are established. The program and a detailed list of auditing procedures for evaluation of efficiency of information systems and technologies have been presented

  14. Assessment of quality of glycemic control in intensive care patients treated with an insulin infusion at a teaching hospital.

    Science.gov (United States)

    Gauthier, Lyne; Ferguson, Jessica; Dubé, Anne-Isabelle; Nguyen, Patrick Viet-Quoc; Beauchesne, Marie-France; Boutin, Jean-Marie

    2014-04-01

    To describe the quality of glycemic control in patients in intensive care units (ICUs) treated with an intravenous (IV) insulin infusion at a teaching hospital. This retrospective study included patients admitted to the ICU and treated with an IV insulin infusion for at least 12 h between August 1 and November 30, 2011. Medical charts were reviewed. The primary quality indicator for glycemic control was the mean percent of blood glucose values per patient in the 6.1 to 8 mmol/L target range. A total of 351 patients were included; 61.5% of subjects had no known diabetes. Admissions were mainly for surgery (61.3%). The mean Acute Physiology and Chronic Health Evaluation (APACHE) II score was 16.8±7.3. The mean percent of blood glucose values per patient in the 6.1 to 8 mmol/L range was 35% for all subjects and 26.2% for patients with diabetes. If a target of 6.1 to 10 mmol/L was considered, those values became 63% and 54.6%. At least 1 episode of hyperglycemia (>10 mmol/L), hypoglycemia (quality of glycemic control in patients in the ICU at our hospital needs to be improved. A new computerized IV insulin protocol is currently being tested. Copyright © 2014 Canadian Diabetes Association. Published by Elsevier Inc. All rights reserved.

  15. A low-cost computer-controlled Arduino-based educational laboratory system for teaching the fundamentals of photovoltaic cells

    Energy Technology Data Exchange (ETDEWEB)

    Zachariadou, K; Yiasemides, K; Trougkakos, N [Technological Educational Institute of Piraeus, P Ralli and Thivon 250, 12244 Egaleo (Greece)

    2012-11-15

    We present a low-cost, fully computer-controlled, Arduino-based, educational laboratory (SolarInsight) to be used in undergraduate university courses concerned with electrical engineering and physics. The major goal of the system is to provide students with the necessary instrumentation, software tools and methodology in order to learn fundamental concepts of semiconductor physics by exploring the process of an experimental physics inquiry. The system runs under the Windows operating system and is composed of a data acquisition/control board, a power supply and processing boards, sensing elements, a graphical user interface and data analysis software. The data acquisition/control board is based on the Arduino open source electronics prototyping platform. The graphical user interface and communication with the Arduino are developed in C number sign and C++ programming languages respectively, by using IDE Microsoft Visual Studio 2010 Professional, which is freely available to students. Finally, the data analysis is performed by using the open source, object-oriented framework ROOT. Currently the system supports five teaching activities, each one corresponding to an independent tab in the user interface. SolarInsight has been partially developed in the context of a diploma thesis conducted within the Technological Educational Institute of Piraeus under the co-supervision of the Physics and Electronic Computer Systems departments' academic staff. (paper)

  16. A Randomized Controlled Trial of Simulation-Based Teaching versus Traditional Instruction in Medicine: A Pilot Study among Clinical Medical Students

    Science.gov (United States)

    Gordon, James A.; Shaffer, David W.; Raemer, Daniel B.; Pawlowski, John; Hurford, William E.; Cooper, Jeffrey B.

    2006-01-01

    Objective: To compare simulator-based teaching with traditional instruction among clinical medical students. Methods: Randomized controlled trial with written pre-post testing. Third-year medical students (n = 38) received either a myocardial infarction (MI) simulation followed by a reactive airways disease (RAD) lecture, or a RAD simulation…

  17. Tools for developing software for different types of microprocessors, to be used, in particular, for the acquisition and processing of nuclear data

    International Nuclear Information System (INIS)

    Maloeuvre, Michel.

    1982-04-01

    It is difficult to imagine the realization of a system with a microprocessor without the use of an adapted development system. As these systems are prohibitively expensive, it is difficult for a laboratory to acquire them. A computer, such as the Multi 20 is provided with programme generating tools and supervisors to put the computer's ressources at the microprocessor's disposal. An electronic crate assures interface functions with the computer, the emulation of the microprocessor and the loading of EROM and the live memory lank in order to execute the different units integrated into the crate, enables the crate to be used as a portable repair and maintenance outfit for the materials installed. In the first part of the text, we present the principles of the development tools showing how they are used to realize microprocessor equipment. In the second part, the software is optimized together with the choice of materials in order to define a low cost development system [fr

  18. Mentored peer review of standardized manuscripts as a teaching tool for residents: a pilot randomized controlled multi-center study.

    Science.gov (United States)

    Wong, Victoria S S; Strowd, Roy E; Aragón-García, Rebeca; Moon, Yeseon Park; Ford, Blair; Haut, Sheryl R; Kass, Joseph S; London, Zachary N; Mays, MaryAnn; Milligan, Tracey A; Price, Raymond S; Reynolds, Patrick S; Selwa, Linda M; Spencer, David C; Elkind, Mitchell S V

    2017-01-01

    There is increasing need for peer reviewers as the scientific literature grows. Formal education in biostatistics and research methodology during residency training is lacking. In this pilot study, we addressed these issues by evaluating a novel method of teaching residents about biostatistics and research methodology using peer review of standardized manuscripts. We hypothesized that mentored peer review would improve resident knowledge and perception of these concepts more than non-mentored peer review, while improving review quality. A partially blinded, randomized, controlled multi-center study was performed. Seventy-eight neurology residents from nine US neurology programs were randomized to receive mentoring from a local faculty member or not. Within a year, residents reviewed a baseline manuscript and four subsequent manuscripts, all with introduced errors designed to teach fundamental review concepts. In the mentored group, mentors discussed completed reviews with residents. Primary outcome measure was change in knowledge score between pre- and post-tests, measuring epidemiology and biostatistics knowledge. Secondary outcome measures included level of confidence in the use and interpretation of statistical concepts before and after intervention, and RQI score for baseline and final manuscripts. Sixty-four residents (82%) completed initial review with gradual decline in completion on subsequent reviews. Change in primary outcome, the difference between pre- and post-test knowledge scores, did not differ between mentored (-8.5%) and non-mentored (-13.9%) residents ( p  = 0.48). Significant differences in secondary outcomes (using 5-point Likert scale, 5 = strongly agree) included mentored residents reporting enhanced understanding of research methodology (3.69 vs 2.61; p  = 0.001), understanding of manuscripts (3.73 vs 2.87; p  = 0.006), and application of study results to clinical practice (3.65 vs 2.78; p  = 0.005) compared to non

  19. Outcomes of a natural rubber latex control program in an Ontario teaching hospital.

    Science.gov (United States)

    Tarlo, S M; Easty, A; Eubanks, K; Parsons, C R; Min, F; Juvet, S; Liss, G M

    2001-10-01

    Allergy to natural rubber latex (NRL) has been frequently reported in health care workers. However, there is little published evidence of the outcome of hospital intervention programs to reduce exposure and detect cases of sensitization early. This study assesses the effects of intervention to reduce NRL allergy in an Ontario teaching hospital with approximately 8000 employees. A retrospective review assessed annual numbers of employees visiting the occupational health clinic, allergy clinic, or both for manifestations of NRL allergy compared with the timing of introduction of intervention strategies, such as worker education, voluntary medical surveillance, and hospital conversion to low-protein, powder-free NRL gloves. The number of workers identified with NRL allergy rose annually, from 1 in 1988 to 6 in 1993. When worker education and voluntary medical surveillance were introduced in 1994, a further 25 workers were identified. Nonsterile gloves were changed to low-protein, powder-free NRL gloves in 1995: Diagnoses fell to 8 workers that year, and 2 of the 3 nurses who had been off work because of asthma-anaphylaxis were able to return to work with personal avoidance of NRL products. With a change to lower protein, powder-free NRL sterile gloves in 1997, allergy diagnoses fell to 3, and only 1 new case was identified subsequently up to May 1999. No increased glove costs were incurred as a result of consolidated glove purchases. This program to reduce NRL allergy in employees was effectively achieved without additional glove costs while reducing expenses from time off work and workers' compensation claims.

  20. Control of carbapenem-resistant Acinetobacter baumannii outbreak in an intensive care unit of a teaching hospital in Southern Italy.

    Science.gov (United States)

    Bianco, Aida; Quirino, Angela; Giordano, Mariavalentina; Marano, Vito; Rizzo, Claudia; Liberto, Maria Carla; Focà, Alfredo; Pavia, Maria

    2016-12-12

    Acinetobacter baumannii is an opportunistic pathogen that has become a major cause of concern, since it is a frequent cause of healthcare-associated infections (HAIs). The aim of the study was to describe the occurrence, the management and the control of an outbreak that occurred in an intensive care unit (ICU) of a teaching hospital in Southern Italy caused by multiple strains of extensively drug-resistant A. baumannii (XDRAB). Case-patient was defined as a patient with an healthcare-associated infection caused by an XDRAB isolate identified in a clinically significant culture. Environmental samples were collected from different surfaces. The isolates were identified by typical Gram stain morphology, using the Vitek 2 system (bioMérieux, France) and by MALDI-TOF MS mass spectrometry (bioMèrieux, France). Genotyping was performed through rep-PCR analysis. A patient presented an XDRAB ventilator-associated pneumonia at admission and was managed with strict isolation precautions until discharge. Five patients had a ventilator-associated pneumonia and two had a central line-associated bloodstream infection. Of the environmental samples, 1 sample obtained from the side of the bed of an infected patient yielded growth of XDRAB. Infection control measures were adopted. Rep-PCR analysis identified four patterns. The integration of epidemiological and microbiological data and the application of infection control measures were crucial to bring such an outbreak to a rapid halt. The distinctive characteristic of this study was the complex molecular pattern of the outbreak, which subsided in a short period of time due to adherence to infection-control measures, confirming the fundamental role of molecular typing in the comprehension of outbreaks dynamics and of integrated control interventions for the interruption of epidemic events.

  1. Evaluation of eLearning for the teaching of undergraduate ophthalmology at medical school: a randomised controlled crossover study.

    Science.gov (United States)

    Petrarca, Caroline A; Warner, Julia; Simpson, Andrew; Petrarca, Robert; Douiri, Abdel; Byrne, David; Jackson, Timothy L

    2018-05-25

    To compare ophthalmology teaching delivered by eLearning with traditional lectures, in terms of undergraduate performance and satisfaction. Randomised controlled crossover study at King's College London Medical School with 245 third year medical students. The ophthalmology syllabus was divided into ten topics. Five topics were randomised to be taught by traditional lectures and five by electronic learning (eLearning). For the second rotation of students the topics were crossed over, so that those topics taught by traditional lectures were taught by eLearning and vice versa. At the end of each rotation the students sat an optional online mock examination containing 100 questions (ten on each topic). Students' examination performance was compared between the two teaching methods. Student satisfaction was assessed using an online satisfaction survey. Outcome measures were the mean percentage of correct answers across all ten topics, student satisfaction and self-assessed knowledge. The mean examination score for questions taught by eLearning was 58% (95% CI, 55.7-59.6), versus 55% (95% CI 53.1-56.8) for traditional lectures (P = 0.047). Across all topics students were more satisfied with eLearning than traditional lectures, with 87% (95% CI 84.5-88.4) rating eLearning as 'excellent' or 'good' versus 65% (95% CI 62.0-67.4) for lectures (p eLearning compared to traditional lectures, with 166 (69.7%) rating eLearning 'much better' or 'better,' 61 (25.6%) 'neutral' and 11 (4.6%) 'worse' or 'much worse.' Student satisfaction and examination performance are both enhanced by ophthalmology eLearning. Similar eLearning modules may be suitable for other specialties and postgraduate learning.

  2. Analysis of the Intel 386 and i486 microprocessors for the Space Station Freedom Data Management System

    Science.gov (United States)

    Liu, Yuan-Kwei

    1991-01-01

    The feasibility is analyzed of upgrading the Intel 386 microprocessor, which has been proposed as the baseline processor for the Space Station Freedom (SSF) Data Management System (DMS), to the more advanced i486 microprocessors. The items compared between the two processors include the instruction set architecture, power consumption, the MIL-STD-883C Class S (Space) qualification schedule, and performance. The advantages of the i486 over the 386 are (1) lower power consumption; and (2) higher floating point performance. The i486 on-chip cache does not have parity check or error detection and correction circuitry. The i486 with on-chip cache disabled, however, has lower integer performance than the 386 without cache, which is the current DMS design choice. Adding cache to the 386/386 DX memory hierachy appears to be the most beneficial change to the current DMS design at this time.

  3. Genomic analysis suggests that mRNA destabilization by the microprocessor is specialized for the auto-regulation of Dgcr8.

    Directory of Open Access Journals (Sweden)

    Archana Shenoy

    2009-09-01

    Full Text Available The Microprocessor, containing the RNA binding protein Dgcr8 and RNase III enzyme Drosha, is responsible for processing primary microRNAs to precursor microRNAs. The Microprocessor regulates its own levels by cleaving hairpins in the 5'UTR and coding region of the Dgcr8 mRNA, thereby destabilizing the mature transcript.To determine whether the Microprocessor has a broader role in directly regulating other coding mRNA levels, we integrated results from expression profiling and ultra high-throughput deep sequencing of small RNAs. Expression analysis of mRNAs in wild-type, Dgcr8 knockout, and Dicer knockout mouse embryonic stem (ES cells uncovered mRNAs that were specifically upregulated in the Dgcr8 null background. A number of these transcripts had evolutionarily conserved predicted hairpin targets for the Microprocessor. However, analysis of deep sequencing data of 18 to 200nt small RNAs in mouse ES, HeLa, and HepG2 indicates that exonic sequence reads that map in a pattern consistent with Microprocessor activity are unique to Dgcr8.We conclude that the Microprocessor's role in directly destabilizing coding mRNAs is likely specifically targeted to Dgcr8 itself, suggesting a specialized cellular mechanism for gene auto-regulation.

  4. Total dose and dose rate radiation characterization of EPI-CMOS radiation hardened memory and microprocessor devices

    International Nuclear Information System (INIS)

    Gingerich, B.L.; Hermsen, J.M.; Lee, J.C.; Schroeder, J.E.

    1984-01-01

    The process, circuit discription, and total dose radiation characteristics are presented for two second generation hardened 4K EPI-CMOS RAMs and a first generation 80C85 microprocessor. Total dose radiation performance is presented to 10M rad-Si and effects of biasing and operating conditions are discussed. The dose rate sensitivity of the 4K RAMs is also presented along with single event upset (SEU) test data

  5. Klystron control software in the SLC

    International Nuclear Information System (INIS)

    Jobe, R.K.; Thompson, K.; Phinney, N.

    1985-05-01

    Triggering, control, and monitoring of 240 high-power klystrons will be supported by the SLC control system this summer. The control software is distributed among a VAX host computer, a local microprocessor cluster, and a dedicated intelligent CAMAC module. The functions performed by these three components and the algorithms used are discussed

  6. Teaching Self-Control to Dually Diagnosed Deaf Students: Promising Procedures.

    Science.gov (United States)

    Morrow, Lonny W.

    1985-01-01

    Three pilot studies suggested that deaf multiply disabled students (ages 15-18) can learn and implement self-control strategies while becoming more independent and engaging in more age-appropriate prosocial behavior. Use of the skills was maintained and appeared to generalize to other school and nonschool environments. (CL)

  7. Control of Chemical Equilibrium by Solvent: A Basis for Teaching Physical Chemistry of Solutions

    Science.gov (United States)

    Prezhdo, Oleg V.; Craig, Colleen F.; Fialkov, Yuriy; Prezhdo, Victor V.

    2007-01-01

    The study demonstrates that the solvent present in a system can highly alter and control the chemical equilibrium of a system. The results show that the dipole moment and polarizibility of a system can be highly altered by using different mixed solvents.

  8. Teaching the Whole Student: Perceived Academic Control in College Art Instruction

    Science.gov (United States)

    Lavender, Randall; Nguyen-Rodriguez, Selena T.; Spruijt-Metz, Donna

    2010-01-01

    While college art instructors strive to respond to the current generation of students, educational psychologists stress the importance of teachers' focusing on students' cognitive-affective makeup in addition to conveying course content. Attribution theory--and more specifically, student perceptions of control over academic outcomes--can serve to…

  9. Torque Control of a Rehabilitation Teaching Robot Using Magneto-Rheological Fluid Clutches

    Science.gov (United States)

    Hakogi, Hokuto; Ohaba, Motoyoshi; Kuramochi, Naimu; Yano, Hidenori

    A new robot that makes use of MR-fluid clutches for simulating torque is proposed to provide an appropriate device for training physical therapy students in knee-joint rehabilitation. The feeling of torque provided by the robot is expected to correspond to the torque performance obtained by physical therapy experts in a clinical setting. The torque required for knee-joint rehabilitation, which is a function of the rotational angle and the rotational angular velocity of a knee movement, is modeled using a mechanical system composed of typical spring-mass-damper elements. The robot consists of two MR-fluid clutches, two induction motors, and a feedback control system. In the torque experiments, output torque is controlled using the spring and damper coefficients separately. The values of these coefficients are determined experimentally. The experimental results show that the robot would be suitable for training physical therapy students to experience similar torque feelings as needed in a clinical situation.

  10. Involving fathers in teaching youth about farm tractor seatbelt safety--a randomized control study.

    Science.gov (United States)

    Jinnah, Hamida Amirali; Stoneman, Zolinda; Rains, Glen

    2014-03-01

    Farm youth continue to experience high rates of injury and deaths as a result of agricultural activities. Farm machinery, especially tractors, is the most common cause of casualties to youth. A Roll-Over Protection Structure (ROPS) along with a fastened seatbelt can prevent almost all injuries and fatalities from tractor overturns. Despite this knowledge, the use of seatbelts by farmers on ROPS tractors remains low. This study treats farm safety as a family issue and builds on the central role of parents as teachers and role models of farm safety for youth. This research study used a longitudinal, repeated-measures, randomized-control design in which youth 10-19 years of age were randomly assigned to either of two intervention groups (parent-led group and staff-led group) or the control group. Fathers in the parent-led group were less likely to operate ROPS tractors without a seatbelt compared with other groups. They were more likely to have communicated with youth about the importance of wearing seatbelts on ROPS tractors. Consequently, youth in the parent-led group were less likely to operate a ROPS tractor without a seatbelt than the control group at post-test. This randomized control trial supports the effectiveness of a home-based, father-led farm safety intervention as a promising strategy for reducing youth as well as father-unsafe behaviors (related to tractor seatbelts) on the farm. This intervention appealed to fathers' strong motivation to practice tractor safety for the sake of their youth. Involving fathers helped change both father as well as youth unsafe tractor-seatbelt behaviors. Copyright © 2014 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  11. Singing teaching as a therapy for chronic respiratory disease - a randomised controlled trial and qualitative evaluation

    Directory of Open Access Journals (Sweden)

    Kelly Julia L

    2010-08-01

    Full Text Available Abstract Background Despite optimal pharmacological therapy and pulmonary rehabilitation, patients with COPD continue to be breathless. There is a need to develop additional strategies to alleviate symptoms. Learning to sing requires control of breathing and posture and might have benefits that translate into daily life. Methods To test this hypothesis we performed a randomised controlled trial, comparing a six week course of twice weekly singing classes to usual care, in 28 COPD patients. The experience of singing was assessed in a qualitative fashion, through interviews with a psychologist. In addition, we surveyed patients with chronic respiratory conditions who participated in a series of open singing workshops. Results In the RCT, the physical component score of the SF36 improved in the singers (n = 15 compared to the controls (n = 13; +7.5(14.6 vs. -3.8(8.4 p = 0.02. Singers also had a significant fall in HAD anxiety score; -1.1(2.7 vs. +0.8(1.7 p = 0.03. Singing did not improve single breath counting, breath hold time or shuttle walk distance. In the qualitative element, 8 patients from the singing group were interviewed. Positive effects on physical sensation, general well-being, community/social support and achievement/efficacy emerged as common themes. 150 participants in open workshops completed a questionnaire. 96% rated the workshops as "very enjoyable" and 98% thought the workshop had taught them something about breathing in a different way. 81% of attendees felt a "marked physical difference" after the workshop. Conclusion Singing classes can improve quality of life measures and anxiety and are viewed as a very positive experience by patients with respiratory disease; no adverse consequences of participation were observed. Trial Registration Current Controlled Trials - ISRCTN17544114.

  12. Integrating existing radiation monitors into a microprocessor-based display system

    International Nuclear Information System (INIS)

    Kalita, R, S.; Bartucci, C.M.; Mason, R.G.; Greaves, C.

    1992-01-01

    Plantwide digital radiation monitoring systems (RMSs) have been generally installed as part of the original design for newer nuclear reactors. For older plants, area and process radiation monitors were either analog or a combination of analog and digital but were not part of an integrated system design. At some plants, individual monitors have been replaced or modified, resulting in a rainbow of different monitors and vendors being represented at the plant. Usually at some point, consideration is given to replacing these monitors with a state-of-the-art RMS to improve overall reliability and achieve the benefits of sound human factors engineering. This can be a very costly project in terms of expenditures for engineering, equipment, construction, startup, and time. When human engineering deficiencies (HEDs) became an issue at Zion station, Commonwealth Edison elected to install a computer-based radiation monitoring display system (RMDS) that would interface existing raidation monitors. After reviewing the existing as-built RMS configuration and internal circuits of the various monitors, it was concluded that a microprocessor-based RMDS could be successfully designed and installed that would solve the HEDs and would tie the older analog channels into a system configuration. Although in many cases, internal modifications were made to existing RMS monitors, the RMDS upgrade allowed the existing RMS monitors to retain their original functionality and location

  13. SEU simulation and testing of resistor-hardened D-latches in the SA3300 microprocessor

    International Nuclear Information System (INIS)

    Sexton, F.W.; Corbett, W.T.; Treece, R.K.; Hass, K.J.; Axness, C.L.; Hash, G.L.; Shaneyfelt, M.R.; Wunsch, T.F.; Hughes, K.L.

    1991-01-01

    In this paper the SEU tolerance of the SA3300 microprocessor with feedback resistors is presented and compared to the SA3300 without feedback resistors and to the commercial version (NS32016). Upset threshold at room temperature increased from 23 MeV-cm 2 /mg and 180 MeV-cm 2 /mg with feedback resistors of 50 kΩ and 160 kΩ, respectively. The performance goal of 10 MHz over the full temperature range of -55 degrees C to +125 degrees C is exceeded for feedback resistors of 160 kΩ and less. Error rate calculations for this design predict that the error rate is less than once every 100 years when 50 kΩ feedback resistors are used in the D-latch design. Analysis of the SEU response using a lumped-parameter circuit simulator imply a charge collection depth of 4.5 μm. This is much deeper than the authors would expect for prompt collection in the epi and funnel regions and has been explained in terms of diffusion current in the heavily doped substrate

  14. A randomized controlled trial on teaching geriatric medical decision making and cost consciousness with the serious game GeriatriX.

    Science.gov (United States)

    Lagro, Joep; van de Pol, Marjolein H J; Laan, Annalies; Huijbregts-Verheyden, Fanny J; Fluit, Lia C R; Olde Rikkert, Marcel G M

    2014-12-01

    Medical students often lack training in complex geriatric medical decision making. We therefore developed the serious game, GeriatriX, for training medical decision making with weighing patient preferences, and appropriateness and costs of medical care. We hypothesized that education with GeriatriX would improve the ability to deal with geriatric decision making and also increase cost consciousness. A randomized, controlled pre-post measurement design. Fifth-year medical students. Playing the serious game GeriatriX as an additive to usual geriatric education. We evaluated the effects of playing GeriatriX on self-perceived knowledge of geriatric themes and the self-perceived competence of weighing patient preferences, appropriateness, and costs of medical care in geriatric decision making. Cost consciousness was evaluated with a postmeasurement to estimate costs of different diagnostic tests. There was a large positive increase in the self-perceived competence of weighing patient preferences, appropriateness, and costs of medical care in the intervention group (n = 71) (effect sizes of 0.7, 1.0, and 1.2, respectively), which was significantly better for the last 2 aspects than in the control group (n = 63). The intervention group performed better on cost consciousness. Although the self-perceived knowledge increased substantially on some geriatric topics, this improvement was not different between the intervention and control groups. After playing the serious game, GeriatriX, medical students have a higher self-perceived competence in weighing patient preferences, appropriateness, and costs of medical care in complex geriatric medical decision making. Playing GeriatriX also resulted in better cost consciousness. We therefore encourage wider use of GeriatriX to teach geriatrics in medical curricula and its further research on educational and health care outcomes. Copyright © 2014 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier

  15. Magnet power supply control of the NSLS VUV and x-ray storage rings transfer lines

    International Nuclear Information System (INIS)

    Klein, J.D.; Ramamoorthy, S.; Singh, O.; Smith, J.D.

    1985-01-01

    The transfer lines for NSLS VUV and x-ray storage rings have been split. New power supplies have been incorporated with existing ones. The existing microprocessor system has been upgraded in order to control the additional functions. This system expands the input/output port of the microprocessor to an addressable serial/parallel link to each magnet power supply. The implementation of this system will be discussed

  16. Teaching Emotional Intelligence: A Control Group Study of a Brief Educational Intervention for Emergency Medicine Residents

    Directory of Open Access Journals (Sweden)

    Diane L. Gorgas

    2015-11-01

    Full Text Available Introduction: Emotional Intelligence (EI is defined as an ability to perceive another’s emotional state combined with an ability to modify one’s own. Physicians with this ability are at a distinct advantage, both in fostering teams and in making sound decisions. Studies have shown that higher physician EI’s are associated with lower incidence of burn-out, longer careers, more positive patient-physician interactions, increased empathy, and improved communication skills. We explored the potential for EI to be learned as a skill (as opposed to being an innate ability through a brief educational intervention with emergency medicine (EM residents. Methods: This study was conducted at a large urban EM residency program. Residents were randomized to either EI intervention or control groups. The intervention was a two-hour session focused on improving the skill of social perspective taking (SPT, a skill related to social awareness. Due to time limitations, we used a 10-item sample of the Hay 360 Emotional Competence Inventory to measure EI at three time points for the training group: before (pre and after (post training, and at six-months post training (follow up; and at two time points for the control group: pre- and follow up. The preliminary analysis was a four-way analysis of variance with one repeated measure: Group x Gender x Program Year over Time. We also completed post-hoc tests. Results: Thirty-three EM residents participated in the study (33 of 36, 92%, 19 in the EI intervention group and 14 in the control group. We found a significant interaction effect between Group and Time (p<0.05. Post-hoc tests revealed a significant increase in EI scores from Time 1 to 3 for the EI intervention group (62.6% to 74.2%, but no statistical change was observed for the controls (66.8% to 66.1%, p=0.77. We observed no main effects involving gender or level of training. Conclusion: Our brief EI training showed a delayed but statistically significant

  17. Teaching Thermal Hydraulics and Numerical Methods: An Introductory Control Volume Primer

    International Nuclear Information System (INIS)

    D. S. Lucas

    2004-01-01

    A graduate level course for Thermal Hydraulics (T/H) was taught through Idaho State University in the spring of 2004. A numerical approach was taken for the content of this course since the students were employed at the Idaho National Laboratory and had been users of T/H codes. The majority of the students had expressed an interest in learning about the Courant Limit, mass error, semi-implicit and implicit numerical integration schemes in the context of a computer code. Since no introductory text was found the author developed notes taught from his own research and courses taught for Westinghouse on the subject. The course started with a primer on control volume methods and the construction of a Homogeneous Equilibrium Model (HEM) (T/H) code. The primer was valuable for giving the students the basics behind such codes and their evolution to more complex codes for Thermal Hydraulics and Computational Fluid Dynamics (CFD). The course covered additional material including the Finite Element Method and non-equilibrium (T/H). The control volume primer and the construction of a three-equation (mass, momentum and energy) HEM code are the subject of this paper . The Fortran version of the code covered in this paper is elementary compared to its descendants. The steam tables used are less accurate than the available commercial version written in C Coupled to a Graphical User Interface (GUI). The Fortran version and input files can be downloaded at www.microfusionlab.com

  18. A better way to teach knot tying: a randomized controlled trial comparing the kinesthetic and traditional methods.

    Science.gov (United States)

    Huang, Emily; Chern, Hueylan; O'Sullivan, Patricia; Cook, Brian; McDonald, Erik; Palmer, Barnard; Liu, Terrence; Kim, Edward

    2014-10-01

    Knot tying is a fundamental and crucial surgical skill. We developed a kinesthetic pedagogical approach that increases precision and economy of motion by explicitly teaching suture-handling maneuvers and studied its effects on novice performance. Seventy-four first-year medical students were randomized to learn knot tying via either the traditional or the novel "kinesthetic" method. After 1 week of independent practice, students were videotaped performing 4 tying tasks. Three raters scored deidentified videos using a validated visual analog scale. The groups were compared using analysis of covariance with practice knots as a covariate and visual analog scale score (range, 0 to 100) as the dependent variable. Partial eta-square was calculated to indicate effect size. Overall rater reliability was .92. The kinesthetic group scored significantly higher than the traditional group for individual tasks and overall, controlling for practice (all P kinesthetic overall mean was 64.15 (standard deviation = 16.72) vs traditional 46.31 (standard deviation = 16.20; P kinesthetic suture handling substantively improved performance on knot tying. We believe this effect can be extrapolated to more complex surgical skills. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. Thermal treatment system of hazardous residuals in three heating zones based on a microprocessor; Sistema de tratamiento termico de residuos peligrosos en tres zonas de calentamiento a base de un microcontrolador.

    Energy Technology Data Exchange (ETDEWEB)

    Luna H, C L

    1997-12-01

    Thermal treatment system consists of a high power electric oven of three heating zones where each zone works up to 1200 Centigrades; it has the capacity of rising the central zone temperature up to 1000 Centigrades in 58 minutes approximately. This configuration of three zones could be programmed to different temperatures and they will be digitally controlled by a control microprocessor, which has been controlled by its own assembler language, in function of the PID control. There are also other important controls based on this microprocessor, as a signal amplification, starting and shutdown of high power step relays, activation and deactivation of both analogic/digital and digital/analogic convertors, port activation and basic data storage of the system. Two main characteristics were looked for this oven design; the first was the possibility of controlling the three zone temperature and the second was to reduce the rising and stabilization operation time and its digitized control. The principal function of the three zone oven is to accelerate the degradation of hazardous residuals by an oxidation instead combustion, through relatively high temperatures (minimum 800 Centigrades and maximum 1200 Centigrades); this process reduces the ash and volatile particulate production. The hazardous residuals will be pumped into the degradation system and after atomized through a packaged column; this step will avoid the direct contact of the residuals with the oven cores. These features make this system as closed process, which means that the residuals can not leak to the working area, reducing the exposure risk to the personnel. This three step oven system is the first stage of the complete hazardous residuals degradation system; after this, the flow will go into a cold plasma region where the process is completed, making a closed system. (Author).

  20. Teaching of evidence-based medicine to medical students in Mexico: a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Sánchez-Mendiola Melchor

    2012-11-01

    Full Text Available Abstract Background Evidence-Based Medicine (EBM is an important competency for the healthcare professional. Experimental evidence of EBM educational interventions from rigorous research studies is limited. The main objective of this study was to assess EBM learning (knowledge, attitudes and self-reported skills in undergraduate medical students with a randomized controlled trial. Methods The educational intervention was a one-semester EBM course in the 5th year of a public medical school in Mexico. The study design was an experimental parallel group randomized controlled trial for the main outcome measures in the 5th year class (M5 EBM vs. M5 non-EBM groups, and quasi-experimental with static-groups comparisons for the 4th year (M4, not yet exposed and 6th year (M6, exposed 6 months to a year earlier groups. EBM attitudes, knowledge and self-reported skills were measured using Taylor’s questionnaire and a summative exam which comprised of a 100-item multiple-choice question (MCQ test. Results 289 Medical students were assessed: M5 EBM=48, M5 non-EBM=47, M4=87, and M6=107. There was a higher reported use of the Cochrane Library and secondary journals in the intervention group (M5 vs. M5 non-EBM. Critical appraisal skills and attitude scores were higher in the intervention group (M5 and in the group of students exposed to EBM instruction during the previous year (M6. The knowledge level was higher after the intervention in the M5 EBM group compared to the M5 non-EBM group (pd=0.88 with Taylor's instrument and 3.54 with the 100-item MCQ test. M6 Students that received the intervention in the previous year had a knowledge score higher than the M4 and M5 non-EBM groups, but lower than the M5 EBM group. Conclusions Formal medical student training in EBM produced higher scores in attitudes, knowledge and self-reported critical appraisal skills compared with a randomized control group. Data from the concurrent groups add validity evidence to the

  1. Does clinical teacher training always improve teaching effectiveness as opposed to no teacher training? A randomized controlled study.

    Science.gov (United States)

    Breckwoldt, Jan; Svensson, Jörg; Lingemann, Christian; Gruber, Hans

    2014-01-08

    Teacher training may improve teaching effectiveness, but it might also have paradoxical effects. Research on expertise development suggests that the integration of new strategies may result in a temporary deterioration of performance until higher levels of competence are reached. In this study, the impact of a clinical teacher training on teaching effectiveness was assessed in an intensive course in emergency medicine. As primary study outcome students' practical skills at the end of their course were chosen. The authors matched 18 clinical teachers according to clinical experience and teaching experience and then randomly assigned them to a two-day-teacher training, or no training. After 14 days, both groups taught within a 12-hour intensive course in emergency medicine for undergraduate students. The course followed a clearly defined curriculum. After the course students were assessed by structured clinical examination (SCE) and MCQ. The teaching quality was rated by students using a questionnaire. Data for 96 students with trained teachers, and 97 students with untrained teachers were included. Students taught by untrained teachers performed better in the SCE domains 'alarm call' (p teaching quality was rated significantly better by students of untrained teachers (p = 0.05). At the end of a structured intensive course in emergency medicine, students of trained clinical teachers performed worse in 2 of 4 practical SCE domains compared to students of untrained teachers. In addition, subjective evaluations of teaching quality were worse in the group of trained teachers. Difficulties in integrating new strategies in their teaching styles might be a possible explanation.

  2. Home Teaching and Herbart.

    Science.gov (United States)

    Rust, Val D.; Reed, Frances

    1979-01-01

    Viewing the growing disenchantment with state-controlled schooling, the authors predict that home teaching will become an established educational alternative within a short time, and they reflect on the teachings and writings of Johann Friedrich Herbart, an eighteenth-century advocate of educating children at home. (Editor/SJL)

  3. Quality control in linen and laundry service at a tertiary care teaching hospital in India.

    Science.gov (United States)

    Singh, Dara; Qadri, Gj; Kotwal, Monica; Syed, At; Jan, Farooq

    2009-01-01

    The clean bedding and clean clothes installs psychological confidence in the patients and the public and enhances their faith in the services rendered by the hospital. Being an important Component in the management of the patients, a study was carried out to find out the current quality status and its conformity with the known standards and identify the areas of intervention in order to further increase the patient and staff satisfaction regarding the services provided by linen and laundry department Quality control practised in the Linen and Laundry Service was studied by conducting a prospective study on the concept of Donabedian model of structure, process and outcome. Study was done by pre-designed Proforma along with observation / Interviews / Questionnaire and study of records. The input studied included physical facilities, manpower, materials, equipments and environmental factors. The various elements of manpower studied consisted of number of staff working, their qualification, training, promotion avenues, motivation and job satisfaction. Process was studied by carrying out observations in linen and laundry service through a predesigned flow chart which was supplemented by interviews with different category of staff. Patient satisfaction, staff satisfaction and microbial count of laundered linen (quality dimensions) were studied in the outcome. The current study found that in spite of certain deficiencies in the equipment, manpower and process, the linen and laundry service is providing a satisfactory service to its users. However the services can be further improved by removing the present deficiencies both at structure and process level.

  4. Automated facility for analysis of soil samples by neutron activation, counting, and data control

    International Nuclear Information System (INIS)

    Voegele, A.L.; Jesse, R.H.; Russell, W.L.; Baker, J.

    1978-01-01

    An automated facility remotely and automatically analyzes soil, water, and sediment samples for uranium. The samples travel through pneumatic tubes and switches to be first irradiated by neutrons and then counted for resulting neutron and gamma emission. Samples are loaded into special carriers, or rabbits, which are then automatically loaded into the pneumatic transfer system. The sample carriers have been previously coded with an identification number, which can be automatically read in the system. This number is used for correlating and filing data about the samples. The transfer system, counters, and identification system are controlled by a network of microprocessors. A master microprocessor initiates routines in other microprocessors assigned to specific tasks. The software in the microprocessors is unique for this type of application and lends flexibility to the system

  5. Report on the SLC control system

    International Nuclear Information System (INIS)

    Phinney, N.

    1985-05-01

    The SLC control system is based on a VAX 11/780 Host computer with approximately 50 microprocessor clusters which provide distributed intelligence and control of all CAMAC interface modules. This paper will present an overview of the system including current status and a description of the software architecture and communication protocols. 8 refs

  6. Médicarte software developed for the Quebec microprocessor health card project.

    Science.gov (United States)

    Lavoie, G; Tremblay, L; Durant, P; Papillon, M J; Bérubé, J; Fortin, J P

    1995-01-01

    The Quebec Patient Smart Card Project is a Provincial Government initiative under the responsibility of the Rgie de l'assurance-maladie du Québec (Quebec Health Insurance Board). Development, implementation, and assessment duties were assigned to a team from Université Laval, which in turn joined a group from the Direction de la santé publique du Bas-St-Laurent in Rimouski, where the experiment is taking place. The pilot project seeks to evaluate the use and acceptance of a microprocessor card as a way to improve the exchange of clinical information between card users and various health professionals. The card can be best described as a résumé containing information pertinent to an individual's health history. It is not a complete medical file; rather, it is a summary to be used as a starting point for a discussion between health professionals and patients. The target population is composed of persons 60 years and over, pregnant women, infants under 18 months, and the residents of a small town located in the target area, St-Fabien, regardless of age. The health professionals involved are general practitioners, specialists, pharmacists, nurses, and ambulance personnel. Participation in the project is on a voluntary basis. Each health care provider participating in the project has a personal identification number (PIN) and must use both an access card and a user card to access information. This prevents unauthorized access to a patient's card and allows the staff to sign and date information entered onto the patient card. To test the microprocessor card, we developed software based on a problem-oriented approach integrating diagnosis, investigations, treatments, and referrals. This software is not an expert system that constrains the clinician to a particular decisional algorithm. Instead, the software supports the physician in decision making. The software was developed with a graphical interface (Windows 3.1) to maximize its user friendliness. A version of the

  7. Teaching modelling of distributed information and control systems to students using the method of simulation modelling

    Directory of Open Access Journals (Sweden)

    A. V. Gabalin

    2017-01-01

    Full Text Available Mathematical modelling is one of the most effective means to study the complex systems and processes. One of the most convenient means of mathematical modelling used in the analysis of functioning of systems of this class are simulation models that describe the structure and behavior of the system in the form of a program for the PC and allow conducting computer experiments with the aim of obtaining the necessary data on the functioning of the elements and the system as a whole during certain time intervals. Currently, the simulation tools market presents a large number of different simulation systems. However, the selection of suitable tools is very important. Specialized programs in particular are GPSS World, MATLAB/ Simulink, and AnyLogic. Distributed information and control systems (ICS are dispersed in space multifunctional coherent set of stationary and moving elements with developed technical means of reception, transmission and processing of information. The task is to determine a rational structure of ICS, system-planned indicators of quality of development and functioning of which meet specified requirements under given structural constraints, characteristics of information flows, and parameters of technical tools. For experimental research of functioning processes of the described system a simulation model was developed. This model allows obtaining and evaluating such functional characteristics as the degree of technical means utilization, waiting time of information in queues for service, the level of efficiency of transmission and processing of information, the time of forming a single media and etc. The model also allows evaluating the performance of the system depending on the flight schedule, flight paths, characteristics of technical means, the system structure, failure of individual elements and depending on other parameters. The developed simulation model in GPSS allows students to master the subject area deeply enough – the

  8. Early crisis nontechnical skill teaching in residency leads to long-term skill retention and improved performance during crises: A prospective, nonrandomized controlled study.

    Science.gov (United States)

    Doumouras, Aristithes G; Engels, Paul T

    2017-07-01

    Medical error is common in crises, and the majority of observed errors are nontechnical in nature. The long-term impact of teaching crisis nontechnical skills to residents has not been evaluated. The objective of this study was to determine the effect of simulation-based teaching of crisis nontechnical skills compared to controls one year after initial teaching. This was a prospective study using both historical controls and a before-and-after methodology to evaluate the effect of a high-fidelity simulation curriculum that used crisis resource management principles to teach nontechnical skills. Postgraduate year 2 and 3 residents were invited to take part in a prospective training course over 2 years. The primary outcome was leader performance evaluated by expert raters using the previously validated 7-point Ottawa Global Rating Scale. Overall, 23 residents performed 30 simulations over the 2 years with the intervention group of 7 residents being assessed in both years. After adjustment, the postgraduate year 3 intervention group who received training the previous year had significantly higher overall performance scores than all postgraduate year 2 scores (1.09 95% confidence interval 0.70-1.47, P crisis performance compared to historical postgraduate year 3 controls and untrained postgraduate year 2 residents. There were no significant differences between the crisis performance of postgraduate year 2 residents and the untrained postgraduate year 3 controls. This confirms the beneficial effect and long-term retention after crisis nontechnical skill training. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. The effects of two EFL (English as a foreign language) teaching approaches studied by the cotwin control method: a comparative study of the communicative and the grammatical approaches.

    Science.gov (United States)

    Ando, J

    1992-01-01

    The present study compared two different types of English-language teaching approaches, the grammatical approach (GA) and the communicative approach (CA), by the cotwin control method. This study has two purposes: to study the effects of teaching approaches and to estimate genetic influences upon learning aptitudes. Seven pairs of identical twins (MZ) and 4 pairs of fraternal twins (DZ) participated in the experiment along with 68 other nontwin fifth graders. Each cotwin was assigned to the GA and CA respectively and received 20 hours of lessons over a 10-day period. The behavioral similarities between MZ cotwins were statistically and descriptively depicted. No major effect of either teaching approach was noted, but the genetic influence upon individual differences of learning achievement was obvious. Furthermore, an interesting interaction between the teaching approaches and intelligence was found, that is, that the GA capitalises on and CA compensates for intelligence. This interactional pattern could be interpreted as an example of genotype-environment interaction. The relationship between genetic factors and learning aptitudes is discussed.

  10. Ways of Telecommunications Interaction Arrangement for Microprocessor Devices of Different Types in Composition of Multi-Motor Electric Drives

    Science.gov (United States)

    Shpenst, V. A.; Vasiliev, B. Y.; Kalashnikov, O. V.; Oleynikova, A. M.

    2018-05-01

    The article covers a consideration of various state-of-the-art industrial data transfer protocols, e.g. Modbus, Profibus, Industrial Ethernet and CAN. Their pros and cons are analyzed and conclusions made on advisability of the use of each protocol. It is shown that for the arrangement of effective telecommunication interaction of microprocessor devices of different types in the composition of multi-motor electric drives, it is advisable to use highlevel CAN-protocols, such as CANopen and DeviceNet.

  11. The effects of environmental factors and experimental method on the results of low dose rate microprocessor irradiation tests

    Energy Technology Data Exchange (ETDEWEB)

    Laviron, A; Gerard, G [Commissariat a l' Energie Atomique, IPSN, Centre d' Etudes de Valduc, Is-sur-Tille (France); Gauthier, G; Henry, J Y; Le Meur, M [Commissariat a l' Energie Atomique, IPSN, Fontenay-aux-Roses (France)

    1992-02-01

    As part of the safety studies of nuclear facilities, a series of experiments have been in progress over a number of years to determine the principal parameters for which allowance needs to be made in the testing of microprocessors in low dose rate nuclear irradiation environments. This paper contains a brief description of the results already published, followed by a review of the latest results obtained, specifically as concerns the effects of temperature, the origin of the batch, the angle of incidence of the radiation and the test routine used. (author)

  12. Use of a bipolar microprocessor in a multi-window discriminator for a system studying reactor fuel pins

    International Nuclear Information System (INIS)

    Frueh, J.

    1977-01-01

    An automatic evaluation system for non-destructive reactor fuel rod analysis is described. The characteristic γ radiation of certain radioisotopes is measured, and the isotope concentration is derived from this. To determine the radioisotope concentration, a digital multi-window discriminator is installed in the system to isolate the desired γ lines from the total spectrum; in addition, background subtraction is carried out. The multi-window discriminator was constructed of bipolar bit-slice microprocessor modules. A microinstruction set of 4 basic commands was defined by which the functional sequences in the instrument were programmed. (orig.) [de

  13. Teaching attachment behaviors to pregnant women: a randomized controlled trial of effects on infant mental health from birth to the age of three months.

    Science.gov (United States)

    Akbarzadeh, Marzieh; Dokuhaki, Akram; Joker, Azam; Pishva, Narges; Zare, Najaf

    2016-01-01

    Maternal-fetal attachment, which forms as soon as pregnancy starts, is essential to an infant's mental development. This study aimed to explore the effect of teaching attachment behaviors to pregnant women on infant mental health from birth to 3 months of age. Randomized controlled trial. Hafiz Hospital, Shiraz University of Medical Sciences, Iran, from February to November 2014. The participants were randomly divided into an intervention and a control group at 28-34 weeks gestation. The participants in the intervention group attended six educational sessions each lasting for 60-90 minutes. After delivery, the infants of mothers in each group were compared in terms of mental health indexes (total mean scores and scores derived from a checklist of questions for infant mental health with results categorized as low, average and high). Maternal anxiety levels were also recorded at birth and at 3 months. Infant mental health index. In 190 pregnant women (96 in the intervention group and 94 in the control group), the total mean (SD) scores for infant mental health at birth were 16.66 (1.51) in the intervention group and 16.07 (1.74) in the control group (P=.013). At 3 months, the total mental health scores infants were 31.05 (1.88) in the intervention group and 30.25 (2.10) in the control group (P=.007). Differences in checklist scores between the groups at 3 months were not statistically significant, except for crying intensity at 3 months (P=.021). Women in the control group had higher anxiety levels at 3 months (P=.01). Teaching attachment skills to mothers increased the attachment between the mothers and their infants, and consequently, improved infant mental health. Thus, teaching attachment skills should be incorporated into routine prenatal care. Use of phone calls by the researcher to assess mental health.

  14. Dynamic control of quadruped robot with hierarchical control structure

    International Nuclear Information System (INIS)

    Wang, Yu-Zhang; Furusho, Junji; Okajima, Yosuke.

    1988-01-01

    For moving on irregular terrain, such as the inside of a nuclear power plant and outer space, it is generally recognized that the multilegged walking robot is suitable. This paper proposes a hierarchical control structure for the dynamic control of quadruped walking robots. For this purpose, we present a reduced order model which can approximate the original higher order model very well. Since this reduced order model does not require much computational time, it can be used in the real-time control of a quadruped walking robot. A hierarchical control experiment is shown in which the optimal control algorithm using a reduced order model is calculated by one microprocessor, and the other control algorithm is calculated by another microprocessor. (author)

  15. The message architecture of the LEP control system

    International Nuclear Information System (INIS)

    Altaber, J.; van der Stok, P.; Frammery, V.; Gareyte, C.; Rausch, R.

    1985-01-01

    The LEP control system will be constructed as a global communication system where microprocessors will be used everywhere, from the management of the communication mechanisms, the execution of complex control procedures, and the supervision of the equipment. To achieve this, the global control problem has been cut into sizeable functions which will be encapsulated into microprocessor modules containing enough hardware for the function to be mostly self-contained. This leads to a function architecture where messages are exchanged between the functions on miscellaneous media. It is shown how these message exchanges can be organized into a uniform flow of data all through the system

  16. A mobile console for local access to accelerator control systems.

    CERN Multimedia

    1981-01-01

    Microprocessors were installed as auxiliary crate controllers (ACCs) in the CAMAC interface of control systems for various accelerators. The same ACC was also at the hearth of a stand-alone system in the form of a mobile console. This was also used for local access to the control systems for tests and development work (Annual Report 1981, p. 80, Fig. 10).

  17. The control system

    International Nuclear Information System (INIS)

    1988-01-01

    The present control system has matured both in terms of age and capacity. Thus a new system based on a local area network (LAN) is being developed. A pilot project has been started but, owing to difficulties encountered with the present operating system used with the microprocessors, it has become necessary to reconsider the choice of operating system. A recently-released multi-tasking operating system that runs on the existing hardware has been chosen. 1 fig

  18. ZEUS hardware control system

    Science.gov (United States)

    Loveless, R.; Erhard, P.; Ficenec, J.; Gather, K.; Heath, G.; Iacovacci, M.; Kehres, J.; Mobayyen, M.; Notz, D.; Orr, R.; Orr, R.; Sephton, A.; Stroili, R.; Tokushuku, K.; Vogel, W.; Whitmore, J.; Wiggers, L.

    1989-12-01

    The ZEUS collaboration is building a system to monitor, control and document the hardware of the ZEUS detector. This system is based on a network of VAX computers and microprocessors connected via ethernet. The database for the hardware values will be ADAMO tables; the ethernet connection will be DECNET, TCP/IP, or RPC. Most of the documentation will also be kept in ADAMO tables for easy access by users.

  19. ZEUS hardware control system

    International Nuclear Information System (INIS)

    Loveless, R.; Erhard, P.; Ficenec, J.; Gather, K.; Heath, G.; Iacovacci, M.; Kehres, J.; Mobayyen, M.; Notz, D.; Orr, R.; Sephton, A.; Stroili, R.; Tokushuku, K.; Vogel, W.; Whitmore, J.; Wiggers, L.

    1989-01-01

    The ZEUS collaboration is building a system to monitor, control and document the hardware of the ZEUS detector. This system is based on a network of VAX computers and microprocessors connected via ethernet. The database for the hardware values will be ADAMO tables; the ethernet connection will be DECNET, TCP/IP, or RPC. Most of the documentation will also be kept in ADAMO tables for easy access by users. (orig.)

  20. The Analysis of Interactivity in a Teaching and Learning Sequence of Rugby: The Transfer of Control and Learning Responsibility

    Science.gov (United States)

    Llobet-Martí, Bernat; López-Ros, Víctor; Vila, Ignasi

    2018-01-01

    Background: The social constructivist perspective emphasises that learning is a process of self-construction of knowledge in a social context. Game-centred approaches, such as teaching games for understanding, have been used in accordance with this perspective. The process of transferring learning responsibility takes place when the learner is…

  1. Process control system for fresh concrete preparation

    International Nuclear Information System (INIS)

    Bachvarov, N.; Pavlov, P.; Shukov, H.

    1983-01-01

    The paper discusses the principles, structure and organization of a modular microprocessor based control system, designed to be used in fresh concrete fabrication plants. The system is based on the measurement of the aggregate moisture by means of a neutron moisture meter. (author)

  2. PEP-II injection timing and controls

    International Nuclear Information System (INIS)

    Bharadwaj, V.; Browne, M.; Crane, M.; Gromme, T.; Himel, T.; Ross, M.; Stanek, M.; Ronan, M.

    1997-07-01

    Hardware has been built and software written and incorporated in the existing SLC accelerator control system to control injection of beam pulses from the accelerator into the PEP-II storage rings currently under construction. Hardware includes a CAMAC module to delay the machine timing fiducial in order that a beam pulse extracted from a damping ring will be injected into a selected group of four 476 MHz buckets in a PEP-II ring. Further timing control is accomplished by shifting the phase of the bunches stored in the damping rings before extraction while leaving the phase of the PEP-II stored beam unchanged. The software which drives timing devices on a pulse-to-pulse basis relies on a dedicated communication link on which one scheduling microprocessor broadcasts a 128-bit message to all distributed control microprocessors at 360 Hz. PEP-II injection will be driven by the scheduling microprocessor according to lists specifying bucket numbers in arbitrary order, and according to scheduling constraints maximizing the useful beam delivered to the SLC collider currently in operation. These lists will be generated by a microprocessor monitoring the current stored per bucket in each of the PEP-II rings

  3. Distributed control system for the National Synchrotron Light Source

    International Nuclear Information System (INIS)

    Batchelor, K.; Culwick, B.B.; Goldstick, J.; Sheehan, J.; Smith, J.

    1979-01-01

    Until recently, accelerator and similar control systems have used modular interface hardware such as CAMAC or DATACON which translated digital computer commands transmitted over some data link into hardware device status and monitoring variables. Such modules possessed little more than local buffering capability in the processing of commands and data. The advent of the micro-processor has made available low cost small computers of significant computational capability. This paper describes how micro-computers including such micro-processors and associated memory, input/output devices and interrupt facilities have been incorporated into a distributed system for the control of the NSLS

  4. Teaching Listening

    Science.gov (United States)

    Nemtchinova, Ekaterina

    2013-01-01

    Ekaterina Nemtchinova's book "Teaching Listening" explores different approaches to teaching listening in second language classrooms. Presenting up-to-date research and theoretical issues associated with second language listening, Nemtchinova explains how these new findings inform everyday teaching and offers practical suggestions…

  5. METHODS FOR EVALUATION OF COMPANIES’ INFORMATION SYSTEMS AND TECHNOLOGIES EFFICIENCY AND CONTROL IN TEACHING COURSE "INFORMATION TECHNOLOGY GOVERNANCE"

    OpenAIRE

    Samchynska Yaroslava

    2014-01-01

    The use of the information systems and technologies in economic activity is called to represent companies’ corporate principles, aims, traditions, to help in realization of the planned strategies, thanks to that the management efficiency and the cost of enterprise increases. Teaching for educational discipline «IT Governance» is directed on a study and research of these intercommunications by students of the 5th course on specialties «Computer Science», «Software Engineering» for educational ...

  6. Microprocessing in European High Energy Physics Experiments - ECFA Working Group on Data Processing Standards - Report of the Microprocessor Subgroup May 1982

    CERN Document Server

    European Committee for Future Accelerators (ECFA)

    1982-01-01

    This document contains two reports on the use of microprocessors in European High-Energy Physics experiments. The first is a presentation of data collected by a sub-group of the ECFA working group on data procesing standards. The working group is organised by E. Lillestol, University of Bergen and E.M. Rimmer, CERN, DD Division; the Microprocessor sub-group organiser is L.O. Hertzberger, NIKHEF, Amsterdam. Data are given from projects numbered 81 - 194, and some CERN projects are included. Even though there is some duplication of information, a second report has been appended which covers a wider range of CERN projects. This was the result of a microprocessor survey made at CERN by P. Scharff-Hansen, DD Division, at the request of E. Gabthuler. The ECFA working group intends to have reports for all the sub-groups (10 in number) available in machine-readable form at the CERN computer centre. However, it was felt that the information herein is most valuable to designers and users of microprocessors, and that it...

  7. Teaching Chemical Engineers about Teaching

    Science.gov (United States)

    Heath, Daniel E.; Hoy, Mary; Rathman, James F.; Rohdieck, Stephanie

    2013-01-01

    The Chemical and Biomolecular Engineering Department at The Ohio State University in collaboration with the University Center for the Advancement of Teaching developed the Chemical Engineering Mentored Teaching Experience. The Mentored Teaching Experience is an elective for Ph.D. students interested in pursuing faculty careers. Participants are…

  8. Teaching Morally and Teaching Morality

    Science.gov (United States)

    Fenstermacher, Gary D.; Osguthorpe, Richard D.; Sanger, Matthew N.

    2009-01-01

    In this article, the authors introduce what they believe is an important distinction between teaching morality and teaching morally. In P-12 schools, the moral education debate often focuses on character education programs or other moral curricula. Such programs and curricula are championed as a means of teaching morality and transmitting moral…

  9. Standardized patient simulation versus didactic teaching alone for improving residents' communication skills when discussing goals of care and resuscitation: A randomized controlled trial.

    Science.gov (United States)

    Downar, James; McNaughton, Nancy; Abdelhalim, Tarek; Wong, Natalie; Lapointe-Shaw, Lauren; Seccareccia, Dori; Miller, Kim; Dev, Shelly; Ridley, Julia; Lee, Christie; Richardson, Lisa; McDonald-Blumer, Heather; Knickle, Kerry

    2017-02-01

    Communication skills are important when discussing goals of care and resuscitation. Few studies have evaluated the effectiveness of standardized patients for teaching medical trainees to communicate about goals of care. To determine whether standardized patient simulation offers benefit over didactic sessions alone for improving skill and comfort discussing goals of care. Single-blind, randomized, controlled trial of didactic teaching plus standardized patient simulation versus didactic teaching alone. First-year internal medicine residents. Changes in communication comfort and skill between baseline and 2 months post-training assessed using the Consultation and Relational Empathy measure. We enrolled 94 residents over a 2-year period. Both groups reported a significant improvement in comfort when discussing goals of care with patients. There was no difference in Consultation and Relational Empathy scores following the workshop ( p = 0.79). The intervention group showed a significant increase in Consultation and Relational Empathy scores post-workshop compared with pre-workshop (35.0 vs 31.7, respectively; p = 0.048), whereas there was no improvement in Consultation and Relational Empathy scores in the control group (35.6 vs 36.0; p = 0.4). However, when the results were adjusted for baseline differences in Consultation and Relational Empathy scores in a multivariable regression analysis, group assignment was not associated with an improvement in Consultation and Relational Empathy score. Improvement in comfort scores and perception of benefit were not associated with improvements in Consultation and Relational Empathy scores. Simulation training may improve communication skill and comfort more than didactic training alone, but there were important confounders in this study and further studies are needed to determine whether simulation is better than didactic training for this purpose.

  10. Generic device controller for accelerator control systems

    International Nuclear Information System (INIS)

    Mariotti, R.; Buxton, W.; Frankel, R.; Hoff, L.

    1987-01-01

    A new distributed intelligence control system has become operational at the AGS for transport, injection, and acceleration of heavy ions. A brief description of the functionality of the physical devices making up the system is given. An attempt has been made to integrate the devices for accelerator specific interfacing into a standard microprocessor system, namely, the Universal Device Controller (UDC). The main goals for such a generic device controller are to provide: local computing power; flexibility to configure; and real time event handling. The UDC assemblies and software are described

  11. Technical basis for environmental qualification of microprocessor-based safety-related equipment in nuclear power plants

    International Nuclear Information System (INIS)

    Korsah, K.; Wood, R.T.; Hassan, M.; Tanaka, T.J.

    1998-01-01

    This document presents the results of studies sponsored by the Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. The studies were conducted by Oak Ridge National Laboratory (ORNL), Sandia National Laboratories (SNL), and Brookhaven National Laboratory (BNL). The studies address the following: (1) adequacy of the present test methods for qualification of digital I and C systems; (2) preferred (i.e., Regulatory Guide-endorsed) standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging for equipment to be located in a benign environment; and (5) determination of an appropriate approach for addressing the impact of smoke in digital equipment qualification programs. Significant findings from the studies form the technical basis for a recommended approach to the environmental qualification of microprocessor-based safety-related equipment in nuclear power plants

  12. Technical basis for environmental qualification of microprocessor-based safety-related equipment in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Korsah, K.; Wood, R.T. [Oak Ridge National Lab., TN (United States); Hassan, M. [Brookhaven National Lab., Upton, NY (United States); Tanaka, T.J. [Sandia National Labs., Albuquerque, NM (United States)

    1998-01-01

    This document presents the results of studies sponsored by the Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. The studies were conducted by Oak Ridge National Laboratory (ORNL), Sandia National Laboratories (SNL), and Brookhaven National Laboratory (BNL). The studies address the following: (1) adequacy of the present test methods for qualification of digital I and C systems; (2) preferred (i.e., Regulatory Guide-endorsed) standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging for equipment to be located in a benign environment; and (5) determination of an appropriate approach for addressing the impact of smoke in digital equipment qualification programs. Significant findings from the studies form the technical basis for a recommended approach to the environmental qualification of microprocessor-based safety-related equipment in nuclear power plants.

  13. Comparative Assessment of Three Approaches of Teaching Nonmedically Trained Persons in the Handling of Supraglottic Airways: A Randomized Controlled Trial.

    Science.gov (United States)

    Hensel, Mario; Schmidbauer, Willi; Benker, Michael; Schmieder, Paula; Kerner, Thoralf

    2017-03-01

    The use of supraglottic airways has been recommended in combat trauma airway management. To ensure an adequate airway management on the battlefield, suitable training concepts are sought to efficiently teach as many soldiers as possible. Our aim was to compare three approaches of teaching laypersons in the handling of supraglottic airways in a mannequin model. In this prospective randomized blinded study, 285 military service men without any medical background were divided into three groups and trained in the use of the Laryngeal Mask Airway Supreme (LMA) and the Laryngeal Tube Disposable (LT-D). The first group received a theoretical lecture, the second group was shown an instruction video, and the third group underwent a practical training. Immediately after instruction participants were asked to place the supraglottic airway and ventilate the mannequin within 60 seconds. The entire test was repeated 3 months later. Test results were evaluated with regard to success rate, insertion time, ability to judge the correct placement, and degree of difficulty. Practical training showed the highest success rate when placing supraglottic airways immediately after the instruction (lecture: 68%, video: 74%, training: 94%); (training vs. lecture and training vs. video, p training: 78%); (training vs. lecture, p = 0.019 and training vs. video, p = 0.025). Immediately after the instruction practical training was also superior in terms of insertion time, ability to judge the correct placement, and the self-rated degree of difficulty (p place a supraglottic airway immediately following minimal instruction and after 3 months as well. Study participants achieved the best results after practical training followed by video presentation and finally lecture regardless of the airway device used. There are two possible reasons why practical training is the superior method. Firstly, the success is tied to more time spent with the learners. Secondly, practical training seems to be the best

  14. Mechatronics control technology

    International Nuclear Information System (INIS)

    1988-03-01

    This book consists six chapters, which are an assembler grammar and practical use on Z801 8041/8048 and kind of assemblers and how to use, control of a microprocessor and mechatro with application of 8255, interface circuit and direction of DA converter, control of stepping motor such as introduction of it, sequence switch, drive program of stepping motor, control for DC motor such as normal rotation and abnormal rotation operation of DC motor by personal computer, control AC motor like PWM inverter and data communication among systems such as RS-232C and INTEL-HEXA format program.

  15. Mechatronics control technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-15

    This book consists six chapters, which are an assembler grammar and practical use on Z801 8041/8048 and kind of assemblers and how to use, control of a microprocessor and mechatro with application of 8255, interface circuit and direction of DA converter, control of stepping motor such as introduction of it, sequence switch, drive program of stepping motor, control for DC motor such as normal rotation and abnormal rotation operation of DC motor by personal computer, control AC motor like PWM inverter and data communication among systems such as RS-232C and INTEL-HEXA format program.

  16. Peripheral venous catheter insertion simulation training: A randomized controlled trial comparing performance after instructor-led teaching versus peer-assisted learning.

    Science.gov (United States)

    Pelloux, Sophie; Grégoire, Arnaud; Kirmizigul, Patrice; Maillot, Sandrine; Bui-Xuan, Bernard; Llorca, Guy; Boet, Sylvain; Lehot, Jean-Jacques; Rimmelé, Thomas

    2017-12-01

    Peripheral venous catheter insertion is a procedural skill that every medical student should master. Training is often limited to a small number of students and is poorly evaluated. The objective of this study was to evaluate the performance of peer-assisted learning in comparison to instructor-led teaching for peripheral venous catheter insertion training. Students were randomized to the control group attending a traditional instructor-led training session (slideshow and demonstration by an anesthetist instructor, followed by training on a procedural simulator) or to the test group attending a peer-assisted training session (slideshow and demonstration video-recorded by the same instructor, followed by training on a procedural simulator). The primary endpoint was the performance of peripheral venous catheter insertion, assessed on procedural simulator one week later by blinded experts using a standardized 20-item grid. Students self-evaluated their confidence levels using a numeric 10-point scale. Eighty-six students were included, 73 of whom attended the assessment session. The median performance score was 12/20 [8-15] in the instructor-led teaching group versus 13/20 [11-15] in the peer-assisted learning group (P=0.430). Confidence levels improved significantly after the assessment session and were significantly higher in the peer-assisted learning group (7.6/10 [7.0-8.0] versus 7.0/10 [5.0-8.0], P=0.026). Peer-assisted learning is effective for peripheral venous catheter insertion training and can be as effective as instructor-led teaching. Given the large number of students to train, this finding is important for optimizing the cost-effectiveness of peripheral venous catheter insertion training. Copyright © 2017 Société française d’anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

  17. Comparison of a Web-Based Teaching Tool and Traditional Didactic Learning for In Vitro Fertilization Patients: A Preliminary Randomized Controlled Trial.

    Science.gov (United States)

    Vause, Tannys Dawn Reiko; Allison, David J; Vause, Tricia; Tekok-Kilic, Ayda; Ditor, David S; Min, Jason K

    2018-05-01

    The objective of this prospective RCT was to compare the efficacy of a web-based teaching tool to traditional didactic teaching in IVF patients. Forty women undergoing their first IVF cycle were randomly allocated to an interactive web-based teaching session or a nurse-led didactic teaching session. The primary outcome measure was participant knowledge regarding the IVF process, risks, and logistics assessed before and after the respective teaching session. Secondary outcomes included patient stress, assessed before and after the respective teaching session, and patient satisfaction, assessed following the respective teaching session and on the day of embryo transfer (following implementation of the teaching protocol). Both groups demonstrated similar and significant improvements in knowledge and stress after exposure to their respective teaching sessions. The web-based group was significantly more satisfied than the didactic teaching group. Web-based teaching was also shown to be equally effective for participants of high versus low income and education status for knowledge, stress, and satisfaction. This study provides preliminary support for the use of web-based teaching as an equally effective tool for increasing knowledge and reducing stress compared to traditional didactic teaching in IVF patients, with the added benefit of increased patient satisfaction. Copyright © 2018 Society of Obstetricians and Gynaecologists of Canada. Published by Elsevier Inc. All rights reserved.

  18. The Ganil computer control system renewal

    International Nuclear Information System (INIS)

    David, L.; Lecorche, E.; Luong, T.T.; Ulrich, M.

    1990-01-01

    Since 1982 the GANIL heavy ion accelerator has been under the control of 16-bit minicomputers MITRA, programmable logic controllers and microprocessorized Camac controllers, structured into a partially centralized system. This control system has to be renewed to meet the increasing demands of the accelerator operation which aims to provide higher quality ion beams under more reliable conditions. This paper gives a brief description of the existing control system and then discusses the main issues of the design and the implementation of the future control system: distributed powerful processors federated through Ethernet and flexible network-wide database access, VME standard and front-end microprocessors, enhanced color graphic tools and workstation based operator interface

  19. New developments of the GANIL control system

    International Nuclear Information System (INIS)

    Lecorche, E.

    1985-10-01

    Since its first ion beam, the GANIL accelerator has been driven by a Control System built around a minicomputer MITRA 125 and a distributed intelligence consisting of programmable Controllers and INTEL 8080 equipped autonomous CAMAC Controllers. After a brief description of the GANIL Control System, this paper will lay emphasis on the major improvements undertaken along four main directions: a) Upgrading the Control Computer. b) Introducing more powerful local intelligence. A microprocessorized autonomous CAMAC Controller called ''DIVA 68C'' using the 68000 microprocessor embedded in a VME card has been developed. Also, the 68000 will be used in a general purpose CAMAC module, the first application of which is to replace the existing data link modules. (c) Making human-machine dialog smarter with use of color graphic terminals. d) Meeting the requirements of the coming second injector. In this purpose a fully equipped auxiliary console is being installed near the main console for operation by summer 1985

  20. Mechanical Engineering Design Project report: Enabler control systems

    Science.gov (United States)

    Cullen, Christian; Delvecchio, Dave; Scarborough, Alan; Havics, Andrew A.

    1992-01-01

    The Controls Group was assigned the responsibility for designing the Enabler's control system. The requirement for the design was that the control system must provide a simple user interface to control the boom articulation joints, chassis articulation joints, and the wheel drive. The system required controlling hydraulic motors on the Enabler by implementing 8-bit microprocessor boards. In addition, feedback to evaluate positions and velocities must be interfaced to provide the operator with confirmation as well as control.