Reducing Communication Overhead by Scheduling TCP Transfers on Mobile Devices using Wireless Network Performance Maps

DEFF Research Database (Denmark)

Højgaard-Hansen, Kim; Madsen, Tatiana Kozlova; Schwefel, Hans-Peter

2012-01-01

The performance of wireless communication networks has been shown to have a strong location dependence. Measuring the performance while having accurate location information available makes it possible to generate performance maps. In this paper we propose a framework for the generation and use...... of such performance maps. We demonstrate how the framework can be used to reduce the retransmissions and to better utilise network resources when performing TCP-based file downloads in vehicular M2M communication scenarios. The approach works on top of a standard TCP stack hence has to map identified transmission...

Study of dynamical properties in β-Tcp/Ch layers

International Nuclear Information System (INIS)

Mina, A.; Caicedo, J. C.; Aperador, W.

2015-01-01

β-Tricalcium phosphate/Chitosan (β-Tcp/Ch) coatings were deposited on 316l stainless steel (316l Ss) substrates by a cathodic electrodeposition technique at different coating compositions. The crystal lattice arrangements were analyzed by X-ray diffraction, and the results indicated that the crystallographic structure of β-Tcp was affected by the inclusion of the chitosan content. The changes in the surface morphology as a function of increasing chitosan in the coatings via scanning electron microscopy and atomic force microscopy showed the root-mean squares hardness of the β-Tcp/Ch coatings decreased by further increasing chitosan percentage. The elastic-plastic characteristics of the coatings were determined by conducting nano indentation test, indicating that the increase if chitosan percentage is directly related to increasing the hardness and elastic modulus of the β-Tcp/Ch coatings. Tribological characterization was performed by scratch test and pin-on-disk test to analyze the changes in the surface wear the β-Tcp/Ch coatings. Finally, the results indicated an improvement in the mechanical and tribological properties of the β-Tcp/Ch coatings as a function of increasing of the chitosan percentage. (Author)

Study of dynamical properties in β-Tcp/Ch layers

Energy Technology Data Exchange (ETDEWEB)

Mina, A.; Caicedo, J. C. [Universidad del Valle, Tribology, Powder Metallurgy and Processing of Solid Recycled Research Group, Cali, Valle del Cauca (Colombia); Aperador, W., E-mail: jacaicedoangulo1@gmail.com [Universidad Militar Nueva Granada, Departamento de Ingenieria, 80 Entrada A La KR11 No. 101, Bogota (Colombia)

2015-07-01

β-Tricalcium phosphate/Chitosan (β-Tcp/Ch) coatings were deposited on 316l stainless steel (316l Ss) substrates by a cathodic electrodeposition technique at different coating compositions. The crystal lattice arrangements were analyzed by X-ray diffraction, and the results indicated that the crystallographic structure of β-Tcp was affected by the inclusion of the chitosan content. The changes in the surface morphology as a function of increasing chitosan in the coatings via scanning electron microscopy and atomic force microscopy showed the root-mean squares hardness of the β-Tcp/Ch coatings decreased by further increasing chitosan percentage. The elastic-plastic characteristics of the coatings were determined by conducting nano indentation test, indicating that the increase if chitosan percentage is directly related to increasing the hardness and elastic modulus of the β-Tcp/Ch coatings. Tribological characterization was performed by scratch test and pin-on-disk test to analyze the changes in the surface wear the β-Tcp/Ch coatings. Finally, the results indicated an improvement in the mechanical and tribological properties of the β-Tcp/Ch coatings as a function of increasing of the chitosan percentage. (Author)

TCP-Call Admission Control Interaction in Multiplatform Space Architectures

Directory of Open Access Journals (Sweden)

Georgios Theodoridis

2007-06-01

Full Text Available The implementation of efficient call admission control (CAC algorithms is useful to prevent congestion and guarantee target quality of service (QoS. When TCP protocol is adopted, some inefficiencies can arise due to the peculiar evolution of the congestion window. The development of cross-layer techniques can greatly help to improve efficiency and flexibility for wireless networks. In this frame, the present paper addresses the introduction of TCP feedback into the CAC procedures in different nonterrestrial wireless architectures. CAC performance improvement is shown for different space-based architectures, including both satellites and high altitude platform (HAP systems.

TCP-Call Admission Control Interaction in Multiplatform Space Architectures

Directory of Open Access Journals (Sweden)

Roseti Cesare

2007-01-01

Full Text Available The implementation of efficient call admission control (CAC algorithms is useful to prevent congestion and guarantee target quality of service (QoS. When TCP protocol is adopted, some inefficiencies can arise due to the peculiar evolution of the congestion window. The development of cross-layer techniques can greatly help to improve efficiency and flexibility for wireless networks. In this frame, the present paper addresses the introduction of TCP feedback into the CAC procedures in different nonterrestrial wireless architectures. CAC performance improvement is shown for different space-based architectures, including both satellites and high altitude platform (HAP systems.

Optimizing TCP Performance in Multi-AP Residential Broadband Connections via Minislot Access

Directory of Open Access Journals (Sweden)

Domenico Giustiniano

2013-01-01

Full Text Available The high bandwidth demand of Internet applications has recently driven the need of increasing the residential download speed. A practical solution to the problem is to aggregate the bandwidth of 802.11 access points (APs backhauls in range. Since 802.11 devices are usually single radio, the communication to APs on different radio channels requires a time-division multiple access (TDMA policy at the client station. With an in-depth experimental analysis and a customized 802.11 driver, in this paper, we show that the usage of multi-AP TDMA policy may cause degradation of the TCP throughput and an underutilization of the AP backhauls. We then introduce a simple analytical model that accurately predicts the TCP round-trip time (RTT with a multi-AP TDMA policy and propose a resource allocation algorithm to reduce the observed TCP RTT with a very low computational cost. Our proposed scheme runs locally at the client station and improves the aggregate throughput up to 1.5 times compared to state-of-the-art allocations. We finally show that the throughput achieved by our algorithm is very close to the theoretical upper bound in key simulation scenarios.

TCP Throughput Profiles Using Measurements over Dedicated Connections

Energy Technology Data Exchange (ETDEWEB)

Rao, Nageswara S. [ORNL; Liu, Qiang [ORNL; Sen, Satyabrata [ORNL; Towsley, Don [University of Massachusetts, Amherst; Vardoyan, Gayane [University of Massachusetts, Amherst; Kettimuthu, R. [Argonne National Laboratory (ANL); Foster, Ian [University of Chicago

2017-06-01

Wide-area data transfers in high-performance computing infrastructures are increasingly being carried over dynamically provisioned dedicated network connections that provide high capacities with no competing traffic. We present extensive TCP throughput measurements and time traces over a suite of physical and emulated 10 Gbps connections with 0-366 ms round-trip times (RTTs). Contrary to the general expectation, they show significant statistical and temporal variations, in addition to the overall dependencies on the congestion control mechanism, buffer size, and the number of parallel streams. We analyze several throughput profiles that have highly desirable concave regions wherein the throughput decreases slowly with RTTs, in stark contrast to the convex profiles predicted by various TCP analytical models. We present a generic throughput model that abstracts the ramp-up and sustainment phases of TCP flows, which provides insights into qualitative trends observed in measurements across TCP variants: (i) slow-start followed by well-sustained throughput leads to concave regions; (ii) large buffers and multiple parallel streams expand the concave regions in addition to improving the throughput; and (iii) stable throughput dynamics, indicated by a smoother Poincare map and smaller Lyapunov exponents, lead to wider concave regions. These measurements and analytical results together enable us to select a TCP variant and its parameters for a given connection to achieve high throughput with statistical guarantees.

A GA-based PID active queue management control design for TCP/IP networks

Energy Technology Data Exchange (ETDEWEB)

Kuo, H-H; Chen, C-K; Liao, T-L [Department of Engineering Science, National Cheng Kung University, Tainan 701, Taiwan (China); Yan, J-J [Department of Computer and Communication, Shu-Te University, Kaohsiung 824, Taiwan (China)], E-mail: tlliao@mail.ncku.edu.tw

2008-02-15

In this paper, a genetic algorithm-based (GA-based) proportional-integral-derivative (PID) controller as an active queue manager for Internet routers is proposed to reduce packet loss and improve network utilization in TCP/IP networks. Based on the window-based nonlinear dynamics, the TCP network was modeled as a time-delayed system with a saturated input due to the limitations of packet-dropping probability and the effects of propagation delays in TCP networks. An improved genetic algorithm is employed to derive optimal or near optimal PID control gains such that a performance index of integrated-absolute error (IAE) in terms of the error between the router queue length and the desired queue length is minimized. The performance of the proposed control scheme was evaluated in various network scenarios via a series of numerical simulations. The simulation results confirm that the proposed scheme outperforms other AQM schemes.

A GA-based PID active queue management control design for TCP/IP networks

International Nuclear Information System (INIS)

Kuo, H-H; Chen, C-K; Liao, T-L; Yan, J-J

2008-01-01

In this paper, a genetic algorithm-based (GA-based) proportional-integral-derivative (PID) controller as an active queue manager for Internet routers is proposed to reduce packet loss and improve network utilization in TCP/IP networks. Based on the window-based nonlinear dynamics, the TCP network was modeled as a time-delayed system with a saturated input due to the limitations of packet-dropping probability and the effects of propagation delays in TCP networks. An improved genetic algorithm is employed to derive optimal or near optimal PID control gains such that a performance index of integrated-absolute error (IAE) in terms of the error between the router queue length and the desired queue length is minimized. The performance of the proposed control scheme was evaluated in various network scenarios via a series of numerical simulations. The simulation results confirm that the proposed scheme outperforms other AQM schemes

Compatibility Issues of IPSec and TCP in Wireless Networks

Institute of Scientific and Technical Information of China (English)

ZHAO Hai-yang; XIN Yang

2004-01-01

Due to the problems arising when the Transmission Control Protocol (TCP) is applied over wireless networks, many TCP performance enhancement mechanisms have been proposed. However, such mechanisms aren't compatible with IPSec protocol. The paper reviews the TCP performance enhancement mechanisms in wireless networks. Then the conflicts between them are analyzed. Several proposals for solving theconflicts are discussed, and their benefit and limitations are examined.

Analisis Throughput Varian TCP Pada Model Jaringan WiMAX

Directory of Open Access Journals (Sweden)

Medi Taruk

2016-07-01

Full Text Available Transmission Control Protocol (TCP is a protocol that works at the transport layer of the OSI model. TCP was originally designed more destined for a wired network. However, to meet the need for the development of a very fast network technology based on the needs of the use by the user, it needs further development to the use of TCP on wireless devices. One implementation of a wireless network based on Worldwide Interoperability for Microwave Access (WiMAX network is a model that offers a variety advantage, particularly in terms of access speed. In this case, use NS-2 to see throughput at TCP variants tested, namely TCP-Tahoe, TCP-Reno, TCP-Vegas, and TCP-SACK over WiMAX network model, with few observations scenarios. The first is a look at each of these variants throughput of TCP when only one particular variant of the work in the network. Second observe all variants of TCP throughput at the same time and have the equivalent QoS, but with the possibility of a small congestion based on the capacity of the link is made sufficient. Third observed throughput with multi congestion. In WiMAX network has scheduling services are UGS, rtPS and ertPS using UDP protocol and nrtPS and BE using the TCP Protocol. By using the software network simulator (NS-2 to obtain performance comparison TCP protocol-based services on the WiMAX network with QoS parameters are throughput, packet loss, fairness and time delay.

How Equalization Techniques Affect the TCP Performance of MC-CDMA Systems in Correlated Fading Channels

Directory of Open Access Journals (Sweden)

Giacomo Leonardi

2007-12-01

Full Text Available This paper investigates the impact of several equalization techniques for multicarrier code division multiple access systems on the performance at both lower and upper layers (i.e., physical and TCP layers. Classical techniques such as maximal ratio combining, equal gain combining, orthogonality restoring combining, minimum mean square error, as well as a partial equalization (PE are investigated in time- and frequency-correlated fading channels with various numbers of interferers. Their impact on the performance at upper level is then studied. The results are obtained through an integrated simulation platform carefully reproducing all main aspects affecting the quality of service perceived by the final user, allowing an investigation of the real gain produced by signal processing techniques at TCP level.

Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing.

Science.gov (United States)

Castilho, Miguel; Rodrigues, Jorge; Pires, Inês; Gouveia, Barbara; Pereira, Manuel; Moseke, Claus; Groll, Jürgen; Ewald, Andrea; Vorndran, Elke

2015-01-06

The development of polymer-calcium phosphate composite scaffolds with tailored architectures and properties has great potential for bone regeneration. Herein, we aimed to improve the functional performance of brittle ceramic scaffolds by developing a promising biopolymer-ceramic network. For this purpose, two strategies, namely, direct printing of a powder composition consisting of a 60:40 mixture of α/β-tricalcium phosphate (TCP) powder and alginate powder or vacuum infiltration of printed TCP scaffolds with an alginate solution, were tracked. Results of structural characterization revealed that the scaffolds printed with 2.5 wt% alginate-modified TCP powders presented a uniformly distributed and interfusing alginate TCP network. Mechanical results indicated a significant increase in strength, energy to failure and reliability of powder-modified scaffolds with an alginate content in the educts of 2.5 wt% when compared to pure TCP, as well as to TCP scaffolds containing 5 wt% or 7.5 wt% in the educts, in both dry and wet states. Culture of human osteoblast cells on these scaffolds also demonstrated a great improvement of cell proliferation and cell viability. While in the case of powder-mixed alginate TCP scaffolds, isolated alginate gels were formed between the calcium phosphate crystals, the vacuum-infiltration strategy resulted in the covering of the surface and internal pores of the TCP scaffold with a thin alginate film. Furthermore, the prediction of the scaffolds' critical fracture conditions under more complex stress states by the applied Mohr fracture criterion confirmed the potential of the powder-modified scaffolds with 2.5 wt% alginate in the educts as structural biomaterial for bone tissue engineering.

Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing

International Nuclear Information System (INIS)

Castilho, Miguel; Rodrigues, Jorge; Pires, Inês; Gouveia, Barbara; Pereira, Manuel; Moseke, Claus; Groll, Jürgen; Ewald, Andrea; Vorndran, Elke

2015-01-01

The development of polymer-calcium phosphate composite scaffolds with tailored architectures and properties has great potential for bone regeneration. Herein, we aimed to improve the functional performance of brittle ceramic scaffolds by developing a promising biopolymer–ceramic network. For this purpose, two strategies, namely, direct printing of a powder composition consisting of a 60:40 mixture of α/β-tricalcium phosphate (TCP) powder and alginate powder or vacuum infiltration of printed TCP scaffolds with an alginate solution, were tracked. Results of structural characterization revealed that the scaffolds printed with 2.5 wt% alginate-modified TCP powders presented a uniformly distributed and interfusing alginate TCP network. Mechanical results indicated a significant increase in strength, energy to failure and reliability of powder-modified scaffolds with an alginate content in the educts of 2.5 wt% when compared to pure TCP, as well as to TCP scaffolds containing 5 wt% or 7.5 wt% in the educts, in both dry and wet states. Culture of human osteoblast cells on these scaffolds also demonstrated a great improvement of cell proliferation and cell viability. While in the case of powder-mixed alginate TCP scaffolds, isolated alginate gels were formed between the calcium phosphate crystals, the vacuum-infiltration strategy resulted in the covering of the surface and internal pores of the TCP scaffold with a thin alginate film. Furthermore, the prediction of the scaffolds’ critical fracture conditions under more complex stress states by the applied Mohr fracture criterion confirmed the potential of the powder-modified scaffolds with 2.5 wt% alginate in the educts as structural biomaterial for bone tissue engineering. (paper)

A transport layer protocol for the future high speed grid computing: SCTP versus fast tcp multihoming

International Nuclear Information System (INIS)

Arshad, M.J.; Mian, M.S.

2010-01-01

TCP (Transmission Control Protocol) is designed for reliable data transfer on the global Internet today. One of its strong points is its use of flow control algorithm that allows TCP to adjust its congestion window if network congestion is occurred. A number of studies and investigations have confirmed that traditional TCP is not suitable for each and every type of application, for example, bulk data transfer over high speed long distance networks. TCP sustained the time of low-capacity and short-delay networks, however, for numerous factors it cannot be capable to efficiently deal with today's growing technologies (such as wide area Grid computing and optical-fiber networks). This research work surveys the congestion control mechanism of transport protocols, and addresses the different issues involved for transferring the huge data over the future high speed Grid computing and optical-fiber networks. This work also presents the simulations to compare the performance of FAST TCP multihoming with SCTP (Stream Control Transmission Protocol) multihoming in high speed networks. These simulation results show that FAST TCP multihoming achieves bandwidth aggregation efficiently and outperforms SCTP multihoming under a similar network conditions. The survey and simulation results presented in this work reveal that multihoming support into FAST TCP does provide a lot of benefits like redundancy, load-sharing and policy-based routing, which largely improves the whole performance of a network and can meet the increasing demand of the future high-speed network infrastructures (such as in Grid computing). (author)

TCP Performance in Multi-Polling Game Theory-Based IEEE 802.11 Networks

Directory of Open Access Journals (Sweden)

Cuzanauskas Tomas

2016-12-01

Full Text Available Easy usage and integration with various applications made IEEE 802.11 one of the most used technologies these days, both at home and business premises. Over the years, there have been many additional improvements to the 802.11 standards. Nevertheless, the algorithms and Media Access Control (MAC layer methods are almost the same as in previous Wi-Fi versions. In this paper, a set of methods to improve the total system capacity is proposed – such as efficient transmit power management based on Game Theory with a custom wireless medium protocol. The transmit power management and wireless medium protocol is verified by both simulation and real application scenarios. The results conclude that the capacity of the proposed wireless medium protocol is overall 20 percent higher than the standard 802.11 wireless medium access protocols. Additional TCP Acknowledgment filtering, which was tested together with the proposed wireless medium access protocol, can provide up to 10-percent-higher TCP throughput in high-density scenarios, especially for asymmetrical traffic cases. The conducted research suggests that efficient power management could result in lighter transmit power allocation rules that are currently set by the local regulators for current Wi-Fi devices. Thus, better propagation characteristics and wireless medium management would lead to an overall higher wireless system capacity.

Determination of physical properties for β-TCP + chitosan biomaterial obtained on metallic 316L substrates

International Nuclear Information System (INIS)

Mina, A.; Castaño, A.; Caicedo, J.C.; Caicedo, H.H.; Aguilar, Y.

2015-01-01

Material surface modification, particularly the deposition of special coatings on the surface of surgical implants, is extensively used in bone tissue engineering applications. β-Tricalcium phosphate/Chitosan (β-TCP/Ch) coatings were deposited on 316L stainless steel (316L SS) substrates by a cathodic electro-deposition technique at different coating compositions. The crystal lattice arrangements were analyzed by X-Ray diffraction (XRD), and the results indicated that the crystallographic structure of β-TCP was affected by the inclusion of the chitosan content. The changes in the surface morphology as a function of increasing chitosan in the coatings via scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that root-mean square values of the β-TCP/Ch coatings decreased by further increasing chitosan percentage. The elastic–plastic characteristics of the coatings were determined by conducting nanoindentation test, indicating that increase of chitosan percentage is directly related to increase of hardness and elastic modulus of the β-TCP/Ch coatings. Tribological characterization was performed by scratch test and pin-on-disk test to analyze the changes in the surface wear of β-TCP/Ch coatings. Finally, the results indicated an improvement in the mechanical and tribological properties of the β-TCP/Ch coatings as a function of increasing of the chitosan percentage. This new class of coatings, comprising the bioactive components, is expected not only to enhance the bioactivity and biocompatibility, but also to protect the surface of metallic implants against wear and corrosion. - Highlights: • Superficial phenomenon that occurs in tribological surface of β-tricalcium phosphate-chitosan coatings. • Improvement on surface mechanical properties of ceramic-polymeric and response to surface tribological damage. • β-tricalcium phosphate-chitosan coatings that offer highest performance in the biomedical devices

Determination of physical properties for β-TCP + chitosan biomaterial obtained on metallic 316L substrates

Energy Technology Data Exchange (ETDEWEB)

Mina, A. [Tribology, Powder Metallurgy and Processing of Solid Recycled Research Group, Universidad del Valle, Cali (Colombia); Tecno-Academia ASTIN SENA Reginal Valle (Colombia); Castaño, A. [Tribology, Powder Metallurgy and Processing of Solid Recycled Research Group, Universidad del Valle, Cali (Colombia); Caicedo, J.C., E-mail: julio.cesar.caicedo@correo.univalle.edu.co [Tribology, Powder Metallurgy and Processing of Solid Recycled Research Group, Universidad del Valle, Cali (Colombia); Caicedo, H.H. [Biologics Research, Biotechnology Center of Excellence, Janssen R& D, LLC, Pharmaceutical Companies of Johnson & Johnson, Spring House, PA 19477 (United States); National Biotechnology & Pharmaceutical Association, Chicago, IL 60606 (United States); Aguilar, Y. [Tribology, Powder Metallurgy and Processing of Solid Recycled Research Group, Universidad del Valle, Cali (Colombia)

2015-06-15

Material surface modification, particularly the deposition of special coatings on the surface of surgical implants, is extensively used in bone tissue engineering applications. β-Tricalcium phosphate/Chitosan (β-TCP/Ch) coatings were deposited on 316L stainless steel (316L SS) substrates by a cathodic electro-deposition technique at different coating compositions. The crystal lattice arrangements were analyzed by X-Ray diffraction (XRD), and the results indicated that the crystallographic structure of β-TCP was affected by the inclusion of the chitosan content. The changes in the surface morphology as a function of increasing chitosan in the coatings via scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that root-mean square values of the β-TCP/Ch coatings decreased by further increasing chitosan percentage. The elastic–plastic characteristics of the coatings were determined by conducting nanoindentation test, indicating that increase of chitosan percentage is directly related to increase of hardness and elastic modulus of the β-TCP/Ch coatings. Tribological characterization was performed by scratch test and pin-on-disk test to analyze the changes in the surface wear of β-TCP/Ch coatings. Finally, the results indicated an improvement in the mechanical and tribological properties of the β-TCP/Ch coatings as a function of increasing of the chitosan percentage. This new class of coatings, comprising the bioactive components, is expected not only to enhance the bioactivity and biocompatibility, but also to protect the surface of metallic implants against wear and corrosion. - Highlights: • Superficial phenomenon that occurs in tribological surface of β-tricalcium phosphate-chitosan coatings. • Improvement on surface mechanical properties of ceramic-polymeric and response to surface tribological damage. • β-tricalcium phosphate-chitosan coatings that offer highest performance in the biomedical devices.

Production and characterization of chitosan/gelatin/β-TCP scaffolds for improved bone tissue regeneration

Energy Technology Data Exchange (ETDEWEB)

Serra, I.R.; Fradique, R.; Vallejo, M.C.S.; Correia, T.R.; Miguel, S.P.; Correia, I.J., E-mail: icorreia@ubi.pt

2015-10-01

Recently, bone tissue engineering emerged as a viable therapeutic alternative, comprising bone implants and new personalized scaffolds to be used in bone replacement and regeneration. In this study, biocompatible scaffolds were produced by freeze-drying, using different formulations (chitosan, chitosan/gelatin, chitosan/β-TCP and chitosan/gelatin/β-TCP) to be used as temporary templates during bone tissue regeneration. Sample characterization was performed through attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray diffraction and energy dispersive spectroscopy analysis. Mechanical characterization and porosity analysis were performed through uniaxial compression test and liquid displacement method, respectively. In vitro studies were also done to evaluate the biomineralization activity and the cytotoxic profile of the scaffolds. Scanning electron and confocal microscopy analysis were used to study cell adhesion and proliferation at the scaffold surface and within their structure. Moreover, the antibacterial activity of the scaffolds was also evaluated through the agar diffusion method. Overall, the results obtained revealed that the produced scaffolds are bioactive and biocompatible, allow cell internalization and show antimicrobial activity against Staphylococcus aureus. Such, make these 3D structures as potential candidates for being used on the bone tissue regeneration, since they promote cell adhesion and proliferation and also prevent biofilm development at their surfaces, which is usually the main cause of implant failure. - Highlights: • Production of 3D scaffolds composed by chitosan/gelatin/β-TCP by freeze-drying for bone regeneration • Physicochemical characterization of the bone substitutes by SEM, FTIR, XRD and EDS • Evaluation of the cytotoxic profile and antibacterial activity of the 3D structures through in vitro assays.

Production and characterization of chitosan/gelatin/β-TCP scaffolds for improved bone tissue regeneration

International Nuclear Information System (INIS)

Serra, I.R.; Fradique, R.; Vallejo, M.C.S.; Correia, T.R.; Miguel, S.P.; Correia, I.J.

2015-01-01

Recently, bone tissue engineering emerged as a viable therapeutic alternative, comprising bone implants and new personalized scaffolds to be used in bone replacement and regeneration. In this study, biocompatible scaffolds were produced by freeze-drying, using different formulations (chitosan, chitosan/gelatin, chitosan/β-TCP and chitosan/gelatin/β-TCP) to be used as temporary templates during bone tissue regeneration. Sample characterization was performed through attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray diffraction and energy dispersive spectroscopy analysis. Mechanical characterization and porosity analysis were performed through uniaxial compression test and liquid displacement method, respectively. In vitro studies were also done to evaluate the biomineralization activity and the cytotoxic profile of the scaffolds. Scanning electron and confocal microscopy analysis were used to study cell adhesion and proliferation at the scaffold surface and within their structure. Moreover, the antibacterial activity of the scaffolds was also evaluated through the agar diffusion method. Overall, the results obtained revealed that the produced scaffolds are bioactive and biocompatible, allow cell internalization and show antimicrobial activity against Staphylococcus aureus. Such, make these 3D structures as potential candidates for being used on the bone tissue regeneration, since they promote cell adhesion and proliferation and also prevent biofilm development at their surfaces, which is usually the main cause of implant failure. - Highlights: • Production of 3D scaffolds composed by chitosan/gelatin/β-TCP by freeze-drying for bone regeneration • Physicochemical characterization of the bone substitutes by SEM, FTIR, XRD and EDS • Evaluation of the cytotoxic profile and antibacterial activity of the 3D structures through in vitro assays

Research on TCP/IP network communication based on Node.js

Science.gov (United States)

Huang, Jing; Cai, Lixiong

2018-04-01

In the face of big data, long connection and high synchronization, TCP/IP network communication will cause performance bottlenecks due to its blocking multi-threading service model. This paper presents a method of TCP/IP network communication protocol based on Node.js. On the basis of analyzing the characteristics of Node.js architecture and asynchronous non-blocking I/O model, the principle of its efficiency is discussed, and then compare and analyze the network communication model of TCP/IP protocol to expound the reasons why TCP/IP protocol stack is widely used in network communication. Finally, according to the large data and high concurrency in the large-scale grape growing environment monitoring process, a TCP server design based on Node.js is completed. The results show that the example runs stably and efficiently.

MAC-layer protocol for TCP fairness in Wireless Mesh Networks

KAUST Repository

Nawab, Faisal; Jamshaid, Kamran; Shihada, Basem; Ho, Pin-Han

2012-01-01

In this paper we study the interactions of TCP and IEEE 802.11 MAC in Wireless Mesh Networks (WMNs). We use a Markov chain to capture the behavior of TCP sessions, particularly the impact on network throughput performance due to the effect of queue

OpenVPN and Multipath TCP

OpenAIRE

Paulus, Aloïs

2015-01-01

Testing the performances of using Multipath TCP and OpenVPN on a consumer grade router to aggregate multiple Internet connections and provide a fast and reliable connection to individuals and small companies. Master [60] en sciences informatiques, Université catholique de Louvain, 2015

Analysis of CBRP for UDP and TCP Traffic-Classes to measure throughput in MANETs

Directory of Open Access Journals (Sweden)

Hardeep Singh Rayait

2013-01-01

Full Text Available In this paper, we analyse the throughput of both TCP and UDP traffic classes for cluster based routing protocol for mobile ad hoc network. It uses clustering structure to improve throughput , decrease average end-to-end delay and improve the average packet delivery ratio. We simulate our routing protocol for nodes running the IEEE802.11 MAC for analysis of throughput for both UDP and TCP traffic classes. The application layer protocol used for UDP is CBR and for TCP is FTP.

A Cross Layer Solution to Address TCP Intra-flow Performance Degradation in Multihop Ad hoc Networks

OpenAIRE

Rakocevic, V.; Hamadani, E.

2008-01-01

Incorporating the concept of TCP end-to-end congestion control for wireless networks is one of the primary concerns in designing ad hoc networks since TCP was primarily designed and optimized based on the assumptions for wired networks. In this study, our interest lies on tackling the TCP instability and in particular intra-flow instability problem since due to the nature of applications in multihop ad hoc networks, connection instability or starvation even for a short period of time can have...

SDTCP: Towards Datacenter TCP Congestion Control with SDN for IoT Applications.

Science.gov (United States)

Lu, Yifei; Ling, Zhen; Zhu, Shuhong; Tang, Ling

2017-01-08

The Internet of Things (IoT) has gained popularity in recent years. Today's IoT applications are now increasingly deployed in cloud platforms to perform Big Data analytics. In cloud data center networks (DCN), TCP incast usually happens when multiple senders simultaneously communicate with a single receiver. However, when TCP incast happens, DCN may suffer from both throughput collapse for TCP burst flows and temporary starvation for TCP background flows. In this paper, we propose a software defined network (SDN)-based TCP congestion control mechanism, referred to as SDTCP, to leverage the features, e.g., centralized control methods and the global view of the network, in order to solve the TCP incast problems. When we detect network congestion on an OpenFlow switch, our controller can select the background flows and reduce their bandwidth by adjusting the advertised window of TCP ACK packets of the corresponding background flows so as to reserve more bandwidth for burst flows. SDTCP is transparent to the end systems and can accurately decelerate the rate of background flows by leveraging the global view of the network gained via SDN. The experiments demonstrate that our SDTCP can provide high tolerance for burst flows and achieve better flow completion time for short flows. Therefore, SDTCP is an effective and scalable solution for the TCP incast problem.

SDTCP: Towards Datacenter TCP Congestion Control with SDN for IoT Applications

Directory of Open Access Journals (Sweden)

Yifei Lu

2017-01-01

Full Text Available The Internet of Things (IoT has gained popularity in recent years. Today’s IoT applications are now increasingly deployed in cloud platforms to perform Big Data analytics. In cloud data center networks (DCN, TCP incast usually happens when multiple senders simultaneously communicate with a single receiver. However, when TCP incast happens, DCN may suffer from both throughput collapse for TCP burst flows and temporary starvation for TCP background flows. In this paper, we propose a software defined network (SDN-based TCP congestion control mechanism, referred to as SDTCP, to leverage the features, e.g., centralized control methods and the global view of the network, in order to solve the TCP incast problems. When we detect network congestion on an OpenFlow switch, our controller can select the background flows and reduce their bandwidth by adjusting the advertised window of TCP ACK packets of the corresponding background flows so as to reserve more bandwidth for burst flows. SDTCP is transparent to the end systems and can accurately decelerate the rate of background flows by leveraging the global view of the network gained via SDN. The experiments demonstrate that our SDTCP can provide high tolerance for burst flows and achieve better flow completion time for short flows. Therefore, SDTCP is an effective and scalable solution for the TCP incast problem.

A New TCP Congestion Control Supporting RTT-Fairness

Science.gov (United States)

Ogura, Kazumine; Nemoto, Yohei; Su, Zhou; Katto, Jiro

This paper focuses on RTT-fairness of multiple TCP flows over the Internet, and proposes a new TCP congestion control named “HRF (Hybrid RTT-Fair)-TCP”. Today, it is a serious problem that the flows having smaller RTT utilize more bandwidth than others when multiple flows having different RTT values compete in the same network. This means that a user with longer RTT may not be able to obtain sufficient bandwidth by the current methods. This RTT fairness issue has been discussed in many TCP papers. An example is CR (Constant Rate) algorithm, which achieves RTT-fairness by multiplying the square of RTT value in its window increment phase against TCP-Reno. However, the method halves its windows size same as TCP-Reno when a packet loss is detected. This makes worse its efficiency in certain network cases. On the other hand, recent proposed TCP versions essentially require throughput efficiency and TCP-friendliness with TCP-Reno. Therefore, we try to keep these advantages in our TCP design in addition to RTT-fairness. In this paper, we make intuitive analytical models in which we separate resource utilization processes into two cases: utilization of bottleneck link capacity and that of buffer space at the bottleneck link router. These models take into account three characteristic algorithms (Reno, Constant Rate, Constant Increase) in window increment phase where a sender receives an acknowledgement successfully. Their validity is proved by both simulations and implementations. From these analyses, we propose HRF-TCP which switches two modes according to observed RTT values and achieves RTT fairness. Experiments are carried out to validate the proposed method. Finally, HRF-TCP outperforms conventional methods in RTT-fairness, efficiency and friendliness with TCP-Reno.

A Rate-Adaptive MAC Protocol Based on TCP throughput for Ad Hoc Networks in Fading Channels

Directory of Open Access Journals (Sweden)

Shoko Uchida

2008-10-01

Full Text Available Wireless technology is becoming a leading option for future Internet access. Transmission Control Protocol (TCP is one of the protocols designed on the basis of the transmission characteristics in wired networks. It is known that the TCP performance deteriorates drastically under a wireless communication environment. On the other hand, many wireless networking standards such as IEEE 802.11a, 802.11b, and 802.11g have multirate capability. Therefore, adaptive rate control methods have been proposed for ad hoc networks. However, almost methods require the modification of the request to send (RTS and clear to send (CTS packets. Therefore, the conventional methods are not compatible with the standardized system. In this paper, we propose adaptive rate control mechanisms for ad hoc networks. Our mechanisms are based on the RTS/CTS mechanisms. However, no modifications to the RTS and CTS packets are required in the proposed method. Therefore, our proposed method can attempt to satisfy the conventional IEEE 802.11 standards. Moreover, an adequate transmission rate is selected based on an estimated TCP throughput performance. From simulation results, it is observed that the proposed method can improve the throughput performance without any modification of packet structures.

Internetworking with TCP/IP

CERN Document Server

Comer, Douglas E

2014-01-01

An internationally best-selling, conceptual introduction to the TCP/IP protocols and Internetworking, this book interweaves a clear discussion of fundamentals and scientific principles with details and examples drawn from the latest technologies. Leading author Douglas Comer covers layering and packet formats for all the Internet protocols, includingTCP, IPv4, IPv6, DHCP, and DNS. In addition, the text explains new trends in Internet systems, including packet classification, Software Defined Networking (SDN), and mesh protocols used in The Internet of Things. The text is appropriate for individuals interested in learning more about TCP/IP protocols, Internet architecture, and current networking technologies, as well as engineers who build network systems. It is suitable for junior to graduate-level courses in Computer Networks, Data Networks, Network Protocols, and Internetworking.

Surface biofunctionalization of β-TCP blocks using aptamer 74 for bone tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Ardjomandi, N.; Huth, J. [Department of Oral and Maxillofacial Surgery, University Hospital Tübingen (Germany); Stamov, D.R. [JPK Instruments AG, Berlin (Germany); Henrich, A. [Department of Oral and Maxillofacial Surgery, University Hospital Tübingen (Germany); Klein, C. [Dental Practice Zahngesundheit Waiblingen, Waiblingen (Germany); Wendel, H.-P. [Department of Thoracic, Cardiac and Vascular Surgery, University Hospital, Tübingen (Germany); Reinert, S. [Department of Oral and Maxillofacial Surgery, University Hospital Tübingen (Germany); Alexander, D., E-mail: dorothea.alexander@med.uni-tuebingen.de [Department of Oral and Maxillofacial Surgery, University Hospital Tübingen (Germany)

2016-10-01

Successful bone regeneration following oral and maxillofacial surgeries depends on efficient functionalization strategies that allow the recruitment of osteogenic progenitor cells at the tissue/implant interface. We have previously identified aptamer 74, which exhibited a binding affinity for osteogenically induced jaw periosteal cells (JPCs). In the present study, this aptamer was used for the surface biofunctionalization of β-tricalcium phosphate (β-TCP) blocks. Atomic force microscopy (AFM) measurements showed increased binding activity of aptamer 74 towards osteogenically induced JPCs compared to untreated controls. The immobilization efficiency of aptamer 74 was analyzed using the QuantiFluor ssDNA assay for 2D surfaces and by amino acid analysis for 3D β-TCP constructs. Following the successful immobilization of aptamer 74 in 2D culture wells and on 3D constructs, in vitro assays showed no significant differences in cell proliferation compared to unmodified surfaces. Interestingly, JPC mineralization was significantly higher on the 2D surfaces and higher cell adhesion was detected on the 3D constructs with immobilized aptamer. Herein, we report an established, biocompatible β-TCP matrix with surface immobilization of aptamer 74, which enhances properties such as cell adhesion on 3D constructs and mineralization on 2D surfaces. Further studies need to be performed to improve the immobilization efficiency and to develop a suitable approach for JPC mineralization growing within 3D β-TCP constructs. - Highlights: • Covalent binding of aptamer 74 on PLGA-coated β-tricalcium phosphate constructs. • AFM analysis of rupture forces between aptamer 74 and jaw periosteal cells. • Analysis of jaw periosteal cell functions on aptamer coated β-TCP constructs.

Surface biofunctionalization of β-TCP blocks using aptamer 74 for bone tissue engineering

International Nuclear Information System (INIS)

Ardjomandi, N.; Huth, J.; Stamov, D.R.; Henrich, A.; Klein, C.; Wendel, H.-P.; Reinert, S.; Alexander, D.

2016-01-01

Successful bone regeneration following oral and maxillofacial surgeries depends on efficient functionalization strategies that allow the recruitment of osteogenic progenitor cells at the tissue/implant interface. We have previously identified aptamer 74, which exhibited a binding affinity for osteogenically induced jaw periosteal cells (JPCs). In the present study, this aptamer was used for the surface biofunctionalization of β-tricalcium phosphate (β-TCP) blocks. Atomic force microscopy (AFM) measurements showed increased binding activity of aptamer 74 towards osteogenically induced JPCs compared to untreated controls. The immobilization efficiency of aptamer 74 was analyzed using the QuantiFluor ssDNA assay for 2D surfaces and by amino acid analysis for 3D β-TCP constructs. Following the successful immobilization of aptamer 74 in 2D culture wells and on 3D constructs, in vitro assays showed no significant differences in cell proliferation compared to unmodified surfaces. Interestingly, JPC mineralization was significantly higher on the 2D surfaces and higher cell adhesion was detected on the 3D constructs with immobilized aptamer. Herein, we report an established, biocompatible β-TCP matrix with surface immobilization of aptamer 74, which enhances properties such as cell adhesion on 3D constructs and mineralization on 2D surfaces. Further studies need to be performed to improve the immobilization efficiency and to develop a suitable approach for JPC mineralization growing within 3D β-TCP constructs. - Highlights: • Covalent binding of aptamer 74 on PLGA-coated β-tricalcium phosphate constructs. • AFM analysis of rupture forces between aptamer 74 and jaw periosteal cells. • Analysis of jaw periosteal cell functions on aptamer coated β-TCP constructs.

Genome-Wide Identification and Characterization of BrrTCP Transcription Factors in Brassica rapa ssp. rapa

Directory of Open Access Journals (Sweden)

Jiancan Du

2017-09-01

Full Text Available The teosinte branched1/cycloidea/proliferating cell factor (TCP gene family is a plant-specific transcription factor that participates in the control of plant development by regulating cell proliferation. However, no report is currently available about this gene family in turnips (Brassica rapa ssp. rapa. In this study, a genome-wide analysis of TCP genes was performed in turnips. Thirty-nine TCP genes in turnip genome were identified and distributed on 10 chromosomes. Phylogenetic analysis clearly showed that the family was classified as two clades: class I and class II. Gene structure and conserved motif analysis showed that the same clade genes have similar gene structures and conserved motifs. The expression profiles of 39 TCP genes were determined through quantitative real-time PCR. Most CIN-type BrrTCP genes were highly expressed in leaf. The members of CYC/TB1 subclade are highly expressed in flower bud and weakly expressed in root. By contrast, class I clade showed more widespread but less tissue-specific expression patterns. Yeast two-hybrid data show that BrrTCP proteins preferentially formed heterodimers. The function of BrrTCP2 was confirmed through ectopic expression of BrrTCP2 in wild-type and loss-of-function ortholog mutant of Arabidopsis. Overexpression of BrrTCP2 in wild-type Arabidopsis resulted in the diminished leaf size. Overexpression of BrrTCP2 in triple mutants of tcp2/4/10 restored the leaf phenotype of tcp2/4/10 to the phenotype of wild type. The comprehensive analysis of turnip TCP gene family provided the foundation to further study the roles of TCP genes in turnips.

Identification and expression profiling analysis of TCP family genes involved in growth and development in maize.

Science.gov (United States)

Chai, Wenbo; Jiang, Pengfei; Huang, Guoyu; Jiang, Haiyang; Li, Xiaoyu

2017-10-01

The TCP family is a group of plant-specific transcription factors. TCP genes encode proteins harboring bHLH structure, which is implicated in DNA binding and protein-protein interactions and known as the TCP domain. TCP genes play important roles in plant development and have been evolutionarily and functionally elaborated in various plants, however, no overall phylogenetic analysis or expression profiling of TCP genes in Zea mays has been reported. In the present study, a systematic analysis of molecular evolution and functional prediction of TCP family genes in maize ( Z . mays L.) has been conducted. We performed a genome-wide survey of TCP genes in maize, revealing the gene structure, chromosomal location and phylogenetic relationship of family members. Microsynteny between grass species and tissue-specific expression profiles were also investigated. In total, 29 TCP genes were identified in the maize genome, unevenly distributed on the 10 maize chromosomes. Additionally, ZmTCP genes were categorized into nine classes based on phylogeny and purifying selection may largely be responsible for maintaining the functions of maize TCP genes. What's more, microsynteny analysis suggested that TCP genes have been conserved during evolution. Finally, expression analysis revealed that most TCP genes are expressed in the stem and ear, which suggests that ZmTCP genes influence stem and ear growth. This result is consistent with the previous finding that maize TCP genes represses the growth of axillary organs and enables the formation of female inflorescences. Altogether, this study presents a thorough overview of TCP family in maize and provides a new perspective on the evolution of this gene family. The results also indicate that TCP family genes may be involved in development stage in plant growing conditions. Additionally, our results will be useful for further functional analysis of the TCP gene family in maize.

Active Queue Management in TCP Networks Based on Fuzzy-Pid Controller

Directory of Open Access Journals (Sweden)

Hossein ASHTIANI

2012-01-01

Full Text Available We introduce a novel and robust active queue management (AQM scheme based on a fuzzy controller, called hybrid fuzzy-PID controller. In the TCP network, AQM is important to regulate the queue length by passing or dropping the packets at the intermediate routers. RED, PI, and PID algorithms have been used for AQM. But these algorithms show weaknesses in the detection and control of congestion under dynamically changing network situations. In this paper a novel Fuzzy-based proportional-integral derivative (PID controller, which acts as an active queue manager (AQM for Internet routers, is proposed. These controllers are used to reduce packet loss and improve network utilization in TCP/IP networks. A new hybrid controller is proposed and compared with traditional RED based controller. Simulations are carried out to demonstrate the effectiveness of the proposed method and show that, the new hybrid fuzzy PID controller provides better performance than random early detection (RED and PID controllers

Transformation and biodegradation of 1,2,3-trichloropropane (TCP).

Science.gov (United States)

Samin, Ghufrana; Janssen, Dick B

2012-09-01

1,2,3-Trichloropropane (TCP) is a persistent groundwater pollutant and a suspected human carcinogen. It is also is an industrial chemical waste that has been formed in large amounts during epichlorohydrin manufacture. In view of the spread of TCP via groundwater and its toxicity, there is a need for cheap and efficient technologies for the cleanup of TCP-contaminated sites. In situ or on-site bioremediation of TCP is an option if biodegradation can be achieved and stimulated. This paper presents an overview of methods for the remediation of TCP-contaminated water with an emphasis on the possibilities of biodegradation. Although TCP is a xenobiotic chlorinated compound of high chemical stability, a number of abiotic and biotic conversions have been demonstrated, including abiotic oxidative conversion in the presence of a strong oxidant and reductive conversion by zero-valent zinc. Biotransformations that have been observed include reductive dechlorination, monooxygenase-mediated cometabolism, and enzymatic hydrolysis. No natural organisms are known that can use TCP as a carbon source for growth under aerobic conditions, but anaerobically TCP may serve as electron acceptor. The application of biodegradation is hindered by low degradation rates and incomplete mineralization. Protein engineering and genetic modification can be used to obtain microorganisms with enhanced TCP degradation potential.

Achieving Fair Throughput among TCP Flows in Multi-Hop Wireless Mesh Networks

Science.gov (United States)

Hou, Ting-Chao; Hsu, Chih-Wei

Previous research shows that the IEEE 802.11 DCF channel contention mechanism is not capable of providing throughput fairness among nodes in different locations of the wireless mesh network. The node nearest the gateway will always strive for the chance to transmit data, causing fewer transmission opportunities for the nodes farther from the gateway, resulting in starvation. Prior studies modify the DCF mechanism to address the fairness problem. This paper focuses on the fairness study when TCP flows are carried over wireless mesh networks. By not modifying lower layer protocols, the current work identifies TCP parameters that impact throughput fairness and proposes adjusting those parameters to reduce frame collisions and improve throughput fairness. With the aid of mathematical formulation and ns2 simulations, this study finds that frame transmission from each node can be effectively controlled by properly controlling the delayed ACK timer and using a suitable advertised window. The proposed method reduces frame collisions and greatly improves TCP throughput fairness.

Microwave sintering of nano size powder β-TCP bioceramics

Directory of Open Access Journals (Sweden)

Mirhadi B.

2014-01-01

Full Text Available A nano sized beta tricalcium phosphate (β-TCP powder was conventional sintered (CS and microwave sintered (MW, in order to obtain dense β-TCP ceramics. In this work the effect of microwave sintering conditions on the microstructure, phase composition and mechanical properties of materials based on tricalcium phosphate (TCP was investigated by SEM (scanning electron microscopyand XRD(X-ray diffraction and then compared with conventional sintered samples. Nano-size β-TCP powders with average grain size of 80 nm were prepared by the wet chemical precipitation method with calcium nitrate and diammonium hydrogen phosphate as calcium and phosphorus precursors, respectively. The precipitation process employed was also found to be suitable for the production of submicrometre β-TCP powder in situ. The β-TCP samples microwave (MW sintered for 15 min at 1100°C, with average grain size of 3μm, showed better densification, higher density and certainly higher hardness than samples conventionally sintered for 2 h at the same temperature. By comparing sintered and MW sintered β-TCP samples, it was concluded that MW sintered β-TCP samples have superior mechanical properties.

Active queue management controller design for TCP communication networks: Variable structure control approach

International Nuclear Information System (INIS)

Chen, C.-K.; Liao, T.-L.; Yan, J.-J.

2009-01-01

On the basis of variable structure control (VSC), an active queue management (AQM) controller is presented for a class of TCP communication networks. In the TCP/IP networks, the packet drop probability is limited between 0 and 1. Therefore, we modeled TCP/AQM as a rate-based non-linear system with a saturated input. The objective of the VSC-based AQM controller is to achieve the desired queue size and to guarantee the asymptotic stability of the closed-loop TCP non-linear system with saturated input. The performance and effectiveness of the proposed control law are then validated for different network scenarios through numerical simulations in both MATLAB and Network Simulator-2 (NS-2). Both sets of simulation results have confirmed that the proposed scheme outperforms other AQM schemes.

Active queue management controller design for TCP communication networks: Variable structure control approach

Energy Technology Data Exchange (ETDEWEB)

Chen, C.-K. [Department of Engineering Science, National Cheng Kung University, Tainan 701, Taiwan (China); Liao, T.-L. [Department of Engineering Science, National Cheng Kung University, Tainan 701, Taiwan (China)], E-mail: tlliao@mail.ncku.edu; Yan, J.-J. [Department of Computer and Communication, Shu-Te University, Kaohsiung 824, Taiwan (China)

2009-04-15

On the basis of variable structure control (VSC), an active queue management (AQM) controller is presented for a class of TCP communication networks. In the TCP/IP networks, the packet drop probability is limited between 0 and 1. Therefore, we modeled TCP/AQM as a rate-based non-linear system with a saturated input. The objective of the VSC-based AQM controller is to achieve the desired queue size and to guarantee the asymptotic stability of the closed-loop TCP non-linear system with saturated input. The performance and effectiveness of the proposed control law are then validated for different network scenarios through numerical simulations in both MATLAB and Network Simulator-2 (NS-2). Both sets of simulation results have confirmed that the proposed scheme outperforms other AQM schemes.

Using the ACR/NEMA standard with TCP/IP and Ethernet

Science.gov (United States)

Chimiak, William J.; Williams, Rodney C.

1991-07-01

There is a need for a consolidated picture archival and communications system (PACS) in hospitals. At the Bowman Gray School of Medicine of Wake Forest University (BGSM), the authors are enhancing the ACR/NEMA Version 2 protocol using UNIX sockets and TCP/IP to greatly improve connectivity. Initially, nuclear medicine studies using gamma cameras are to be sent to PACS. The ACR/NEMA Version 2 protocol provides the functionality of the upper three layers of the open system interconnection (OSI) model in this implementation. The images, imaging equipment information, and patient information are then sent in ACR/NEMA format to a software socket. From there it is handed to the TCP/IP protocol, which provides the transport and network service. TCP/IP, in turn, uses the services of IEEE 802.3 (Ethernet) to complete the connectivity. The advantage of this implementation is threefold: (1) Only one I/O port is consumed by numerous nuclear medicine cameras, instead of a physical port for each camera. (2) Standard protocols are used which maximize interoperability with ACR/NEMA compliant PACSs. (3) The use of sockets allows a migration path to the transport and networking services of OSIs TP4 and connectionless network service as well as the high-performance protocol being considered by the American National Standards Institute (ANSI) and the International Standards Organization (ISO) -- the Xpress Transfer Protocol (XTP). The use of sockets also gives access to ANSI's Fiber Distributed Data Interface (FDDI) as well as other high-speed network standards.

Chitosan Fibers Modified with HAp/β–TCP Nanoparticles

Directory of Open Access Journals (Sweden)

Dariusz Wawro

2011-10-01

Full Text Available This paper describes a method for preparing chitosan fibers modified with hydroxyapatite (HAp, tricalcium phosphate (β-TCP, and HAp/β-TCP nanoparticles. Fiber-grade chitosan derived from the northern shrimp (Pandalus borealis and nanoparticles of tricalcium phosphate (β-TCP and hydroxyapatite (HAp suspended in a diluted chitosan solution were used in the investigation. Diluted chitosan solution containing nanoparticles of Hap/β-TCP was introduced to a 5.16 wt% solution of chitosan in 3.0 wt% acetic acid. The properties of the spinning solutions were examined. Chitosan fibers modified with nanoparticles of HAp/β-TCP were characterized by a level of tenacity and calcium content one hundred times higher than that of regular chitosan fibers.

Transformation and biodegradation of 1,2,3-trichloropropane (TCP)

OpenAIRE

Samin, Ghufrana; Janssen, Dick B.

2012-01-01

Purpose 1,2,3-Trichloropropane (TCP) is a persistent groundwater pollutant and a suspected human carcinogen. It is also is an industrial chemical waste that has been formed in large amounts during epichlorohydrin manufacture. In view of the spread of TCP via groundwater and its toxicity, there is a need for cheap and efficient technologies for the cleanup of TCP-contaminated sites. In situ or on-site bioremediation of TCP is an option if biodegradation can be achieved and stimulated. This pap...

Osteoconductivity and Biodegradability of Collagen Scaffold Coated with Nano-β-TCP and Fibroblast Growth Factor 2

Directory of Open Access Journals (Sweden)

Asako Ibara

2013-01-01

Full Text Available Nanoparticle bioceramics have become anticipated for biomedical applications. Highly bioactive and biodegradable scaffolds would be developed using nanoparticles of β-tricalcium phosphate (β-TCP. We prepared collagen scaffolds coated by nano-β-TCP and fibroblast growth factor 2 (FGF2 and evaluated the effects on new bone augmentation and biodegradation. The collagen sponge was coated with the nano-TCP dispersion and freeze-dried. Scaffold was characterized by SEM, TEM, XRD, compressive testing and cell seeding. Subsequently, the nano-β-TCP/collagen scaffold, collagen sponge, and each material loaded with FGF2 were implanted on rat cranial bone. As a control, no implantation was performed. Nano-TCP particles were found to be attached to the fibers of the collagen sponge by SEM and TEM observations. Scaffold coated with nano-TCP showed higher compressive strength and cytocompatibility. In histological evaluations at 10 days, inflammatory cells were rarely seen around the residual scaffold, suggesting that the nano-TCP material possesses good tissue compatibility. At 35 days, bone augmentation and scaffold degradation in histological samples receiving nano-β-TCP scaffold were significantly greater than those in the control. By loading of FGF2, advanced bone formation is facilitated, indicating that a combination with FGF2 would be effective for bone tissue engineering.

Global Connections for Lasting Impressions: Experiential Learning about TCP

Science.gov (United States)

Allison, Colin; Miller, Alan; Oliver, Iain; Sturgeon, Thomas

“Tell me and I forget, Show me and I remember, Involve me and I understand”. This paper discusses the motivation for, and design of, a learning resource which allows students to explore the Transmission Control Protocol (TCP). TCP is responsible for transporting over 80% of the traffic on the Internet - all web and e-mail for example - and in addition is the primary means of achieving Internet congestion control. TCP is therefore core to modern life. It is a protocol under constant study with a view to evolution, and it is incumbent on all ICT curricula to provide education at appropriate levels about its dynamics, strengths and weaknesses. There are no shortages of good textbooks which provide information on TCP, but these are no substitute for experiential learning in order to provide a lasting understanding. The TCP Live learning resource allows students to explore the behavior of TCP on the global Internet, and see the wide variety of conditions that the protocol has to cope with, thereby extending their viewpoint outwith the limited scope of their own institutional firewalls.

Compact Modbus TCP/IP protocol for data acquisition systems based on limited hardware resources

Science.gov (United States)

Bai, Q.; Jin, B.; Wang, D.; Wang, Y.; Liu, X.

2018-04-01

The Modbus TCP/IP has been a standard industry communication protocol and widely utilized for establishing sensor-cloud platforms on the Internet. However, numerous existing data acquisition systems built on traditional single-chip microcontrollers without sufficient resources cannot support it, because the complete Modbus TCP/IP protocol always works dependent on a full operating system which occupies abundant hardware resources. Hence, a compact Modbus TCP/IP protocol is proposed in this work to make it run efficiently and stably even on a resource-limited hardware platform. Firstly, the Modbus TCP/IP protocol stack is analyzed and the refined protocol suite is rebuilt by streamlining the typical TCP/IP suite. Then, specific implementation of every hierarchical layer is respectively presented in detail according to the protocol structure. Besides, the compact protocol is implemented in a traditional microprocessor to validate the feasibility of the scheme. Finally, the performance of the proposed scenario is assessed. The experimental results demonstrate that message packets match the frame format of Modbus TCP/IP protocol and the average bandwidth reaches to 1.15 Mbps. The compact protocol operates stably even based on a traditional microcontroller with only 4-kB RAM and 12-MHz system clock, and no communication congestion or frequent packet loss occurs.

Novel β-TCP/PVA bilayered hydrogels with considerable physical and bio-functional properties for osteochondral repair.

Science.gov (United States)

Yao, Hang; Kang, Junpei; Li, Weichang; Liu, Jian; Xie, Renjian; Wang, Yingjun; Liu, Sa; Wang, Dong-An; Ren, Li

2017-12-07

Cartilage repairing grafts have been widely studied, and osteochondral replacement hydrogels have proven to be an excellent method in research and clinical fields. However, it has been difficult to simultaneously solve three main issues in osteochondral replacement preparation: surface lubrication, overall mechanical support and good simulations of cell regeneration. A novel integrated bilayered hydrogel osteochondral replacement was constructed by blending polyvinyl alcohol (PVA) and β-tricalcium phosphate (β-TCP) in this study. Separated nano-ball milling with ultrasound dispersion prepared β-TCP demonstrated suitable properties of tiny particle size, high purity and ideal distribution, improving the mechanical properties of the novel integrated hydrogel, and providing a cartilage-like lubrication effect and high biocompatibility, including cytocompatibility and osteogenesis. The reinforcement of β-TCP and integrated molding technology enabled the hydrogel to demonstrate excellent component compatibility and good bonding between the two layers, which promoted the strengthening of the compression modulus and tensile modulus up to three times by mechanical testing. The surface lubrication properties of the novel osteochondral hydrogel were similar to the natural cartilage by friction coefficient characterization. The two layers of the novel integrated graft provided a considerable bio-function by co-culturing with chondrocytes and synovium mesenchymal stem cells: chondrocytes promoted adherence achieved by the upper density layer and better osteogenesis performance of the porous lower layer. The design of the bilayered β-TCP/PVA osteochondral hydrogel is promising for use in articular cartilage repair.

Synthesis and degradation properties of β-TCP/BG porous ...

Indian Academy of Sciences (India)

-TCP/BG porous composite materials were successfully fabricated by foaming technology. X-ray diffraction was used to determine the crystal structure of powders. The pore size and distribution of the resulting materials were characterized using scanning electron microscopy. The porosity and degradation performance of ...

ComboCoding: Combined intra-/inter-flow network coding for TCP over disruptive MANETs

Directory of Open Access Journals (Sweden)

Chien-Chia Chen

2011-07-01

Full Text Available TCP over wireless networks is challenging due to random losses and ACK interference. Although network coding schemes have been proposed to improve TCP robustness against extreme random losses, a critical problem still remains of DATA–ACK interference. To address this issue, we use inter-flow coding between DATA and ACK to reduce the number of transmissions among nodes. In addition, we also utilize a “pipeline” random linear coding scheme with adaptive redundancy to overcome high packet loss over unreliable links. The resulting coding scheme, ComboCoding, combines intra-flow and inter-flow coding to provide robust TCP transmission in disruptive wireless networks. The main contributions of our scheme are twofold; the efficient combination of random linear coding and XOR coding on bi-directional streams (DATA and ACK, and the novel redundancy control scheme that adapts to time-varying and space-varying link loss. The adaptive ComboCoding was tested on a variable hop string topology with unstable links and on a multipath MANET with dynamic topology. Simulation results show that TCP with ComboCoding delivers higher throughput than with other coding options in high loss and mobile scenarios, while introducing minimal overhead in normal operation.

A novel implementation of TCP Vegas for optical burst switched networks

KAUST Repository

Shihada, Basem; Zhang, Qiong; Ho, Pin-Han; Jue, Jason P.

2010-01-01

TCP performance over bufferless Optical Burst Switched (OBS) networks could be significantly degraded due to the misinterpretation of network congestion status (referred to as false congestion detection). It has been reported that burst

Analysis of Malicious Traffic in Modbus/TCP Communications

Science.gov (United States)

Kobayashi, Tiago H.; Batista, Aguinaldo B.; Medeiros, João Paulo S.; Filho, José Macedo F.; Brito, Agostinho M.; Pires, Paulo S. Motta

This paper presents the results of our analysis about the influence of Information Technology (IT) malicious traffic on an IP-based automation environment. We utilized a traffic generator, called MACE (Malicious trAffic Composition Environment), to inject malicious traffic in a Modbus/TCP communication system and a sniffer to capture and analyze network traffic. The realized tests show that malicious traffic represents a serious risk to critical information infrastructures. We show that this kind of traffic can increase latency of Modbus/TCP communication and that, in some cases, can put Modbus/TCP devices out of communication.

Development of readout system for FE-I4 pixel module using SiTCP

Energy Technology Data Exchange (ETDEWEB)

Teoh, J.J., E-mail: jjteoh@champ.hep.sci.osaka-u.ac.jp [Graduate School of Science, Osaka University, 1-1 Machikaneyama, Toyonaka, Osaka, 560-0043 (Japan); Hanagaki, K. [Graduate School of Science, Osaka University, 1-1 Machikaneyama, Toyonaka, Osaka, 560-0043 (Japan); Ikegami, Y.; Takubo, Y.; Terada, S.; Unno, Y. [Institute for Particle and Nuclear Studies, High Energy Accelerator Research Organization (KEK), 1-1 Oho, Tsukuba City, Ibaraki-ken 305-0801 (Japan)

2013-12-11

The ATLAS pixel detector will be replaced in the future High Luminosity-Large Hadron Collider (HL-LHC) upgrade to preserve or improve the detector performance at high luminosity environment. To meet the tight requirements of the upgrade, a new pixel Front-End (FE) Integrated Circuit (IC) called FE-I4 has been developed. We have then devised a readout system for the new FE IC. Our system incorporates Silicon Transmission Control Protocol (SiTCP) technology (Uchida, 2008 [1]) which utilizes the standard TCP/IP and UDP communication protocols. This technology allows direct data access and transfer between a readout hardware chain and PC via a high speed Ethernet. In addition, the communication protocols are small enough to be implemented in a single Field-Programable Gate Array (FPGA). Relying on this technology, we have been able to construct a very compact, versatile and fast readout system. We have developed a firmware and software together with the readout hardware chain. We also have established basic functionalities for reading out FE-I4.

Comparison of performance between TCP/IP over ATM e ATM nativo

OpenAIRE

Marcelo Silva Freitas

2001-01-01

Com o recente desenvolvimento de tecnologias de redes de altas taxas de transmissão, tais como Asynchronous Transfer Mode (ATM), o problema da carência por largura de banda foi solucionado. A questão atual é a implementação de sistemas que suportem os protocolos ATM de forma nativa e integral. Atualmente tem-se utilizado aplicativos tradicionais baseados nos protocolos TCP(UDP)/IP no topo da pilha de protocolos ATM. Tal modelo traz redundâncias que implicam diretamente em aumento de overhead ...

Adsorption of 1,2,3-Trichloropropane (TCP) to meet a MCL of 5 ppt.

Science.gov (United States)

Babcock, Roger W; Harada, Bryce K; Lamichhane, Krishna M; Tsubota, Korey T

2018-02-01

1,2,3-Trichloropropane (TCP) is a groundwater contaminant in the drinking water aquifers in Hawaii and some other states. Granular activated carbon (GAC) has been used for 30 years to treat approximately 60 million gallons per day of TCP-contaminated groundwater in Hawaii. The State of Hawaii's current maximum contaminant level (MCL) for TCP is 600 ng/L (ppt), and consideration is being given to lower the MCL to 5 ppt. There is no EPA MCL for TCP. A study was conducted to determine if any GAC could meet a 5 ppt MCL for TCP, and if so, how many bedvolumes (BVs) could be treated prior to breakthrough. Constant Diffusivity-Rapid Small-Scale Column Tests (CD-RSSCTs) were performed to evaluate GAC adsorption of TCP. Three different groundwaters and six different GACs were utilized. The RSSCTs with the currently-utilized GAC were predictive of the performance of the GAC contactors (50,000 BVs to breakthrough). Any of the six GACs could meet a MCL of 5 ppt and some could do so for 150,000 or more BVs. No single GAC was optimal for all three well sites, indicating effects of subtle undefined differences in the water matrix and/or GAC physiochemical properties. The coal-based direct-activated carbon currently being used is the least optimal for all three well sites with respect to meeting a potential new TCP MCL of 5 ppt. The most effective GACs for Kunia were the Calgon coal-based GAC and the Siemens enhanced coconut shell GAC, while the most effective for Waipahu were the Siemens regular and enhanced coconut shell GACs, and the most effective for Mililani was the Calgon coal-based GAC. Choosing just one GAC for use at all three well sites (rather than the optimal for each site) would result in a reduction of treatment run time of 1 year at one well site (63% reduction). Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparative histomorphometric analysis between α-Tcp cement and β-Tcp/Ha granules in the bone repair of rat calvaria

Directory of Open Access Journals (Sweden)

Gisela Grandi

2011-03-01

Full Text Available This study compared the effect of two bioceramics on the process of bone repair: α-tricalcium phosphate (α-TCP cement and β-tricalcium phosphate hydroxyapatite particles (β-TCP/HA. Calvarial defects were created in 50 rats, divided into two groups (α and β/HA. Software was used at 7, 21, 60, 90 and 120 days to assess bone formation. Mean new bone formation rates were as follows: α group, 1.6% at 7 days, 5.24% at 21 days, 24% at 60 days, 30.21% at 90 days and 50.59% at 120 days; β/HA group, 1.94% at 7 days, 2.53% at 21 days, 12.47% at 60 days, 26.84% at 90 days and 38.82% at 120 days; control group, 0.15% at 7 days, 10.12% at 21 days, 15.10% at 60 days, 18.94% at 90 days, 48.50% at 120 days. Both materials are osteoconductive and biocompatible. Perhaps the larger rate of new bone formation observed in the α-TCP group, it also occurs in the β-TCP/HA group within a longer time period.

FAST TCP over optical burst switched networks: Modeling and stability analysis

KAUST Repository

Shihada, Basem

2013-04-01

FAST TCP is important for promoting data-intensive applications since it can cleverly react to both packet loss and delay for detecting network congestion. This paper provides a continuous time model and extensive stability analysis of FAST TCP congestion-control mechanism in bufferless Optical Burst Switched Networks (OBS). The paper first shows that random burst contentions are essential to stabilize the network, but cause throughput degradation in FAST TCP flows when a burst with all the packets from a single round is dropped. Second, it shows that FAST TCP is vulnerable to burst delay and fails to detect network congestion due to the little variation of round-trip time, thus unstable. Finally it shows that introducing extra delays by implementing burst retransmission stabilizes FAST TCP over OBS. The paper proves that FAST TCP is not stable over barebone OBS. However, it is locally, exponentially, and asymptotically stable over OBS with burst retransmission.

Enhanced Critical Size Defect Repair in Rabbit Mandible by Electrospun Gelatin/β-TCP Composite Nanofibrous Membranes

Directory of Open Access Journals (Sweden)

Mingming Xu

2015-01-01

Full Text Available The design and fabrication of biodegradable barrier membranes with satisfactory structure and composition remain a considerable challenge for periodontal tissue regeneration. We have developed a biomimetic nanofibrous membrane made from a composite of gelatin and β-tricalcium phosphate (β-TCP. We previously confirmed the in vitro biological performance of the membrane material, but the efficacy of the membranes in promoting bone repair in situ has not yet been examined. Gelatin/β-TCP composite nanofibers were fabricated by incorporation of 20 wt.% β-TCP nanoparticles into electrospun gelatin nanofibers. Electron microscopy showed that the composite membranes presented a nonwoven structure with an interconnected porous network and had a rough surface due to the β-TCP nanoparticles, which were distributed widely and uniformly throughout the gelatin-fiber matrix. The repair efficacy of rabbit mandible defects implanted with bone substitute (Bio-Oss and covered with the gelatin/β-TCP composite nanofibrous membrane was evaluated in comparison with pure gelatin nanofibrous membrane. Gross observation, histological examination, and immunohistochemical analysis showed that new bone formation and defect closure were significantly enhanced by the composite membranes compared to the pure gelatin ones. From these results, we conclude that nanofibrous gelatin/β-TCP composite membranes could serve as effective barrier membranes for guided tissue regeneration.

A Novel Congestion Detection Scheme in TCP Over OBS Networks

KAUST Repository

Shihada, Basem

2009-02-01

This paper introduces a novel congestion detection scheme for high-bandwidth TCP flows over optical burst switching (OBS) networks, called statistical additive increase multiplicative decrease (SAIMD). SAIMD maintains and analyzes a number of previous round-trip time (RTTs) at the TCP senders in order to identify the confidence with which a packet loss event is due to network congestion. The confidence is derived by positioning short-term RTT in the spectrum of long-term historical RTTs. The derived confidence corresponding to the packet loss is then taken in the developed policy for TCP congestion window adjustment. We will show through extensive simulation that the proposed scheme can effectively solve the false congestion detection problem and significantly outperform the conventional TCP counterparts without losing fairness. The advantages gained in our scheme are at the expense of introducing more overhead in the SAIMD TCP senders. Based on the proposed congestion control algorithm, a throughput model is formulated, and is further verified by simulation results.

MAC-layer protocol for TCP fairness in Wireless Mesh Networks

KAUST Repository

Nawab, Faisal

2012-08-01

In this paper we study the interactions of TCP and IEEE 802.11 MAC in Wireless Mesh Networks (WMNs). We use a Markov chain to capture the behavior of TCP sessions, particularly the impact on network throughput performance due to the effect of queue utilization and packet relaying. A closed form solution is derived to numerically determine the throughput. Based on the developed model, we propose a distributed MAC protocol to alleviate the unfairness problem in WMNs. Our protocol uses the age of packet as a priority metric for packet scheduling. Simulation is conducted to validate our model and to illustrate the fairness characteristics of our proposed MAC protocol. We conclude that we can achieve fairness with only little impact on network capacity.

Suboptimal RED Feedback Control for Buffered TCP Flow Dynamics in Computer Network

Directory of Open Access Journals (Sweden)

N. U. Ahmed

2007-01-01

Full Text Available We present an improved dynamic system that simulates the behavior of TCP flows and active queue management (AQM system. This system can be modeled by a set of stochastic differential equations driven by a doubly stochastic point process with intensities being the controls. The feedback laws proposed monitor the status of buffers and multiplexor of the router, detect incipient congestion by sending warning signals to the sources. The simulation results show that the optimal feedback control law from the class of linear as well as quadratic polynomials can improve the system performance significantly in terms of maximizing the link utilization, minimizing congestion, packet losses, as well as global synchronization. The optimization process used is based on random recursive search technique known as RRS.

Specific proliferation rates of human osteoblasts on calcium phosphate surfaces with variable concentrations of α-TCP

International Nuclear Information System (INIS)

Santos, Euler A. dos; Farina, Marcos; Soares, Gloria A.

2007-01-01

Ideally, ceramics used in the repair of bone defects need to be resorbed and replaced by newly formed bone in vivo. Tricalcium phosphate (TCP) has been widely used in association with hydroxyapatite (HA) due to its higher resorption kinetics when compared with HA alone. The aim of our study was to quantitatively investigate the effect of α-tricalcium phosphate (α-TCP) on human osteoblasts' adhesion and proliferation. Ceramic samples with variable concentrations of α-TCP and HA were produced by the calcination of calcium-deficient and stoichiometric HA. Human osteoblasts were cultured on the materials in three distinct experiments with different concentrations of cells. Numerical evaluation of cellular growth along time in culture was performed for each condition. The quantity of cells seeded onto the ceramics seems to influence the osteoblast behavior once proliferation was lower when more cells were seeded onto the samples. However, a smaller content of α-TCP in relation to that of HA did not significantly modify the specific proliferation rates of the osteoblasts. Only after a long time in culture, the increasing of the α-TCP content seems to change the cells' behavior

Arabidopsis TCP Transcription Factors Interact with the SUMO Conjugating Machinery in Nuclear Foci

Directory of Open Access Journals (Sweden)

Magdalena J. Mazur

2017-11-01

Full Text Available In Arabidopsis more than 400 proteins have been identified as SUMO targets, both in vivo and in vitro. Among others, transcription factors (TFs are common targets for SUMO conjugation. Here we aimed to exhaustively screen for TFs that interact with the SUMO machinery using an arrayed yeast two-hybrid library containing more than 1,100 TFs. We identified 76 interactors that foremost interact with the SUMO conjugation enzyme SCE1 and/or the SUMO E3 ligase SIZ1. These interactors belong to various TF families, which control a wide range of processes in plant development and stress signaling. Amongst these interactors, the TCP family was overrepresented with several TCPs interacting with different proteins of the SUMO conjugation cycle. For a subset of these TCPs we confirmed that the catalytic site of SCE1 is essential for this interaction. In agreement, TCP1, TCP3, TCP8, TCP14, and TCP15 were readily SUMO modified in an E. coli sumoylation assay. Strikingly, these TCP-SCE1 interactions were found to redistribute these TCPs into nuclear foci/speckles, suggesting that these TCP foci represent sites for SUMO (conjugation activity.

Comparative Efficacies of a 3D-Printed PCL/PLGA/β-TCP Membrane and a Titanium Membrane for Guided Bone Regeneration in Beagle Dogs

Directory of Open Access Journals (Sweden)

Jin-Hyung Shim

2015-10-01

Full Text Available This study was conducted to evaluate the effects of a 3D-printed resorbable polycaprolactone/poly(lactic-co-glycolic acid/β-tricalcium phosphate (PCL/PLGA/β-TCP membrane on bone regeneration and osseointegration in areas surrounding implants and to compare results with those of a non-resorbable titanium mesh membrane. After preparation of PCL/PLGA/β-TCP membranes using extrusion-based 3D printing technology; mechanical tensile testing and in vitro cell proliferation testing were performed. Implant surgery and guided bone regeneration were performed randomly in three groups (a no membrane group, a titanium membrane group, and a PCL/PLGA/β-TCP membrane group (n = 8 per group. Histological and histometric analyses were conducted to evaluate effects on bone regeneration and osseointegration. Using the results of mechanical testing; a PCL/PLGA/β-TCP ratio of 2:6:2 was selected. The new bone areas (% in buccal defects around implants were highest in the PCL/PLGA/β-TCP group and significantly higher than in the control group (p < 0.05. Bone-to-implant contact ratios (% were also significantly higher in the PCL/PLGA/β-TCP and titanium groups than in the control group (p < 0.05. When the guided bone regeneration procedure was performed using the PCL/PLGA/β-TCP membrane; new bone formation around the implant and osseointegration were not inferior to those of the non-resorbable pre-formed titanium mesh membrane.

Analysis of SCTP and TCP based communication in high-speed clusters

International Nuclear Information System (INIS)

Kozlovszky, M.; Berceli, T.; Kutor, L.

2006-01-01

Performance and financial constraints are pushing modern DAQs (Data Acquisition Systems) to use distributed cluster environments instead of monolith one-box systems. Inside clusters application communication layers should support outstanding high performance requirements. We are currently investigating different network protocols that could meet the requirements of high speed/low latency peer-to-peer communication within DAQ clusters. We have carried out various performance measurements with TCP and SCTP over Fast and Gigabit Ethernet. We are focusing on Ethernet Technologies, because this transport medium is broad deployed, cost efficient and it has much better cost/throughput ratio than other available communication alternatives (e.g.: Myrinet, Infiniband). During this study, a protocol performance measurement application with different peer transport components has been developed. In the first part of the paper, we give a short comparison of the two protocols (SCTP and TCP), and an introduction of the transport layer structure developed. Later on we discuss the performance results of single/multi-stream peer-to-peer communication, give overview about application code transition possibilities from application developer point of view between the two protocols, and draw conclusions about usability

Genomewide analysis of TCP transcription factor gene family in ...

Indian Academy of Sciences (India)

Home; Journals; Journal of Genetics; Volume 93; Issue 3. Genomewide ... Teosinte branched1/cycloidea/proliferating cell factor1 (TCP) proteins are a large family of transcriptional regulators in angiosperms. They are ... To the best of our knowledge, this is the first study of a genomewide analysis of apple TCP gene family.

TCP Congestion Control for the Networks with Markovian Jump Parameters

Directory of Open Access Journals (Sweden)

MOMENI, H. R.

2011-05-01

Full Text Available This paper is concerned with the problem of TCP congestion control for the class of communication networks with random parameters. The linear dynamic model of TCP New Reno in congestion avoidance mode is considered which contains round trip delays in both state and input. The randomness of link capacity, round trip time delay and the number of TCP sessions is modeled with a continuous-time finite state Markov process. An Active Queue Management (AQM technique is then used to adjust the queue level of the congested link to a predefined value. For this purpose, a dynamic output feedback controller with mode dependent parameters is synthesized to stochastically stabilize the TCP/AQM dynamics. The procedure of the control synthesis is implemented by solving a linear matrix inequality (LMI. The results are tested within a simulation example and the effectiveness of the proposed design method is verified.

Effect of PDGF-BB and beta-tricalcium phosphate (β-TCP) on bone formation around dental implants: a pilot study in sheep.

Science.gov (United States)

Choo, Tina; Marino, Victor; Bartold, P Mark

2013-02-01

The aim of this investigation was to examine the effect of a combination of purified recombinant human platelet-derived growth factor (rhPDGF-BB) mixed with a synthetic beta-tricalcium phosphate (β-TCP) on bone healing around dental implants with critical size circumferential defects. Three critical size circumferential defects were prepared in the ilium of six sheep. Three dental implants were placed into the centre of each defect and the 3.25 mm circumferential gap was filled with (a) blood clot alone; (b) β-TCP; (c) rhPDGF-BB (0.3 mg/ml) with β-TCP. All the defects in each group were covered with a Bio-Gide(®) resorbable barrier membrane. The sheep were sacrificed at 2 and 4 weeks and histological and histomorphometric analyses were performed to determine the percentage of new mineralized bone formation and residual β-TCP graft particles in the defects. Defects filled with rhPDGF-BB/β-TCP showed the highest rate of bone formation after 2 and 4 weeks with limited degradation of the β-TCP particles over 4 weeks. Defects filled with β-TCP showed the least bone fill after 2 and 4 weeks, and faster degradation of the β-TCP particles over 4 weeks compared with defects filled with rhPDGF-BB/β-TCP. Percentage of new mineralized bone was comparable in defects to blood clot alone and β-TCP after 4 weeks of healing, but there was a collapse in the defect area in defects with blood clot alone. In comparison, the space was maintained when β-TCP was used in defects at 4 weeks. Defects which had β-TCP alone showed an inhibition in bone healing at 2 and 4 weeks; however, the combination of rhPDGF-BB with β-TCP enhanced bone regeneration in these peri-implant bone defects at the same time intervals. © 2011 John Wiley & Sons A/S.

Avoiding Biased-Feeding in the Scheduling of Collaborative Multipath TCP.

Directory of Open Access Journals (Sweden)

Meng-Hsun Tsai

Full Text Available Smartphones have become the major communication and portable computing devices that access the Internet through Wi-Fi or mobile networks. Unfortunately, users without a mobile data subscription can only access the Internet at limited locations, such as hotspots. In this paper, we propose a collaborative bandwidth sharing protocol (CBSP built on top of MultiPath TCP (MPTCP. CBSP enables users to buy bandwidth on demand from neighbors (called Helpers and uses virtual interfaces to bind the subflows of MPTCP to avoid modifying the implementation of MPTCP. However, although MPTCP provides the required multi-homing functionality for bandwidth sharing, the current packet scheduling in collaborative MPTCP (e.g., Co-MPTCP leads to the so-called biased-feeding problem. In this problem, the fastest link might always be selected to send packets whenever it has available cwnd, which results in other links not being fully utilized. In this work, we set out to design an algorithm, called Scheduled Window-based Transmission Control (SWTC, to improve the performance of packet scheduling in MPTCP, and we perform extensive simulations to evaluate its performance.

Avoiding Biased-Feeding in the Scheduling of Collaborative Multipath TCP.

Science.gov (United States)

Tsai, Meng-Hsun; Chou, Chien-Ming; Lan, Kun-Chan

2016-01-01

Smartphones have become the major communication and portable computing devices that access the Internet through Wi-Fi or mobile networks. Unfortunately, users without a mobile data subscription can only access the Internet at limited locations, such as hotspots. In this paper, we propose a collaborative bandwidth sharing protocol (CBSP) built on top of MultiPath TCP (MPTCP). CBSP enables users to buy bandwidth on demand from neighbors (called Helpers) and uses virtual interfaces to bind the subflows of MPTCP to avoid modifying the implementation of MPTCP. However, although MPTCP provides the required multi-homing functionality for bandwidth sharing, the current packet scheduling in collaborative MPTCP (e.g., Co-MPTCP) leads to the so-called biased-feeding problem. In this problem, the fastest link might always be selected to send packets whenever it has available cwnd, which results in other links not being fully utilized. In this work, we set out to design an algorithm, called Scheduled Window-based Transmission Control (SWTC), to improve the performance of packet scheduling in MPTCP, and we perform extensive simulations to evaluate its performance.

Application of Azolla for 2, 4, 6-Trichlorophenol (TCP Removal from Aqueous Solutions

Directory of Open Access Journals (Sweden)

Mohammad Ali Zazouli

2013-11-01

Full Text Available Background & Aims of the Study: The 2, 4, 6-Trichlorophenol (TCP is a phenolic compound which it can produce adverse effects on human and environment. Therefore, the removal of these compounds is necessary. The aim of this study is the investigation of TCP removal by using Azolla filiculoides biomass. Materials & Methods: The Azolla biomass was dried in the sunlight, and then it was crushed and sieved to particle sizes in range of 1-2 mm. Next treated with 0.1M HCl for a period of 5h. The Azolla was washed with distilled water and it was used as adsorbent. The effect of operating parameters such as pH, contact time, TCP concentration and adsorbent dose on the TCP removal efficiency was investigated. The residues concentration of TCP was measured by spectrophotometer in λ max of 296 nm. Results: In optimum condition (pH 3, contact time 120 min , adsorbent dose 10 gr/l and TCP concentration 10 ppm, Azolla was able to remove 95% of TCP from aqueous solutions. The equilibrium data follows the Langmuir isotherm and the proper kinetic model is pseudo-second model. Conclusions: Adsorption process by Azolla filiculoides is an efficient method for removal of 2, 4, 6-Trichlorophenol from aqueous solutions.

TCP is hardly resorbed and not osteoconductive in a non-loading calvarial model.

Science.gov (United States)

Handschel, Jörg; Wiesmann, Hans Peter; Stratmann, Udo; Kleinheinz, Johannes; Meyer, Ulrich; Joos, Ulrich

2002-04-01

Tricalciumphosphate (TCP) has been used as a ceramic bone substitute material in the orthopedic field as well as in craniofacial surgery. Some controversies exist concerning the osteoconductive potential of this material in different implantation sites. This study was designed to evaluate the biological response of calvarial bone towards TCP granules under non-loading conditions to assess the potential of TCP as a biodegredable and osteoconductive bone substitue material for the cranial vault. Full-thickness non-critical size defects were made bilaterally in the calvaria of 21 adult Wistar rats. One side was filled by TCP granules, the contralateral side was left empty and used as a control. Animals were sacrified in defined time intervals up to 6 months. Bone regeneration was analyzed with special respect toward the micromorphological and microanalytical features of the material-bone interaction by electron microscopy and electron diffraction analysis. Histologic examination revealed no TCP degradation even after 6 months of implantation. In contrast, a nearly complete bone regeneration of control defects was found after 6 months. At all times TCP was surrounded by a thin fibrous layer without presence of osteoblasts and features of regular mineralization. As far as degradation and substitution are concerned, TCP is a less favourable material tinder conditions of non-loading.

Tumour control probability (TCP) for non-uniform activity distribution in radionuclide therapy

International Nuclear Information System (INIS)

Uusijaervi, Helena; Bernhardt, Peter; Forssell-Aronsson, Eva

2008-01-01

Non-uniform radionuclide distribution in tumours will lead to a non-uniform absorbed dose. The aim of this study was to investigate how tumour control probability (TCP) depends on the radionuclide distribution in the tumour, both macroscopically and at the subcellular level. The absorbed dose in the cell nuclei of tumours was calculated for 90 Y, 177 Lu, 103m Rh and 211 At. The radionuclides were uniformly distributed within the subcellular compartment and they were uniformly, normally or log-normally distributed among the cells in the tumour. When all cells contain the same amount of activity, the cumulated activities required for TCP = 0.99 (A-tilde TCP=0.99 ) were 1.5-2 and 2-3 times higher when the activity was distributed on the cell membrane compared to in the cell nucleus for 103m Rh and 211 At, respectively. TCP for 90 Y was not affected by different radionuclide distributions, whereas for 177 Lu, it was slightly affected when the radionuclide was in the nucleus. TCP for 103m Rh and 211 At were affected by different radionuclide distributions to a great extent when the radionuclides were in the cell nucleus and to lesser extents when the radionuclides were distributed on the cell membrane or in the cytoplasm. When the activity was distributed in the nucleus, A-tilde TCP=0.99 increased when the activity distribution became more heterogeneous for 103m Rh and 211 At, and the increase was large when the activity was normally distributed compared to log-normally distributed. When the activity was distributed on the cell membrane, A-tilde TCP=0.99 was not affected for 103m Rh and 211 At when the activity distribution became more heterogeneous. A-tilde TCP=0.99 for 90 Y and 177 Lu were not affected by different activity distributions, neither macroscopic nor subcellular

LWD–TCP complex activates the morning gene CCA1 in Arabidopsis

Science.gov (United States)

Wu, Jing-Fen; Tsai, Huang-Lung; Joanito, Ignasius; Wu, Yi-Chen; Chang, Chin-Wen; Li, Yi-Hang; Wang, Ying; Hong, Jong Chan; Chu, Jhih-Wei; Hsu, Chao-Ping; Wu, Shu-Hsing

2016-01-01

A double-negative feedback loop formed by the morning genes CIRCADIAN CLOCK ASSOCIATED1 (CCA1)/LATE ELONGATED HYPOCOTYL (LHY) and the evening gene TIMING OF CAB EXPRESSION1 (TOC1) contributes to regulation of the circadian clock in Arabidopsis. A 24-h circadian cycle starts with the peak expression of CCA1 at dawn. Although CCA1 is targeted by multiple transcriptional repressors, including PSEUDO-RESPONSE REGULATOR9 (PRR9), PRR7, PRR5 and CCA1 HIKING EXPEDITION (CHE), activators of CCA1 remain elusive. Here we use mathematical modelling to infer a co-activator role for LIGHT-REGULATED WD1 (LWD1) in CCA1 expression. We show that the TEOSINTE BRANCHED 1-CYCLOIDEA-PCF20 (TCP20) and TCP22 proteins act as LWD-interacting transcriptional activators. The concomitant binding of LWD1 and TCP20/TCP22 to the TCP-binding site in the CCA1 promoter activates CCA1. Our study reveals activators of the morning gene CCA1 and provides an action mechanism that ensures elevated expression of CCA1 at dawn to sustain a robust clock. PMID:27734958

LWD-TCP complex activates the morning gene CCA1 in Arabidopsis.

Science.gov (United States)

Wu, Jing-Fen; Tsai, Huang-Lung; Joanito, Ignasius; Wu, Yi-Chen; Chang, Chin-Wen; Li, Yi-Hang; Wang, Ying; Hong, Jong Chan; Chu, Jhih-Wei; Hsu, Chao-Ping; Wu, Shu-Hsing

2016-10-13

A double-negative feedback loop formed by the morning genes CIRCADIAN CLOCK ASSOCIATED1 (CCA1)/LATE ELONGATED HYPOCOTYL (LHY) and the evening gene TIMING OF CAB EXPRESSION1 (TOC1) contributes to regulation of the circadian clock in Arabidopsis. A 24-h circadian cycle starts with the peak expression of CCA1 at dawn. Although CCA1 is targeted by multiple transcriptional repressors, including PSEUDO-RESPONSE REGULATOR9 (PRR9), PRR7, PRR5 and CCA1 HIKING EXPEDITION (CHE), activators of CCA1 remain elusive. Here we use mathematical modelling to infer a co-activator role for LIGHT-REGULATED WD1 (LWD1) in CCA1 expression. We show that the TEOSINTE BRANCHED 1-CYCLOIDEA-PCF20 (TCP20) and TCP22 proteins act as LWD-interacting transcriptional activators. The concomitant binding of LWD1 and TCP20/TCP22 to the TCP-binding site in the CCA1 promoter activates CCA1. Our study reveals activators of the morning gene CCA1 and provides an action mechanism that ensures elevated expression of CCA1 at dawn to sustain a robust clock.

In vivo labeling of phencyclidine (PCP) receptors with 3H-TCP in the mouse brain

International Nuclear Information System (INIS)

Maurice, T.; Vignon, J.

1990-01-01

The phencyclidine (PCP) derivative N-[1-(2-thienyl)cyclohexyl]-piperidine (3H-TCP) was used to label in vivo the N-methyl-D-aspartate (NMDA) receptor-associated ionic channel in the mouse brain. After the injection of a tracer dose of 3H-TCP, a spread labeling throughout the brain was observed, but was the highest in the cerebellum. Preadministration of unlabeled TCP (30 mg/kg) resulted in a 90% reduction of 3H-TCP binding. PCP, TCP, MK-801, dexoxadrol, ketamine, and SKF 10,047 isomers dose-dependently prevented the in vivo 3H-TCP binding. ID50 determined in the cerebrum and the cerebellum were respectively correlated with K0.5 for 3H TCP high (rat cortex) and low affinity (rat cerebellum) sites in vitro. The pharmacological specificity of the 3H-TCP binding site in the cerebellum was significantly different from that in the cerebrum. ID50 values were generally higher than in the cerebrum and, particularly, MK-801, the most potent drug in the cerebrum, was without significant effect in the cerebellum, at any time and at doses as high as 30 mg/kg. N-[1-(2-benzo(b) thiophenyl)cyclohexyl]piperidine (BTCP), desipramine, and atropine showed a more efficient prevention of 3H-TCP binding in the cerebellum than in the cerebrum. The prevention of the binding by TCP or PCP, at doses close to their ID50 values, was rapid and then decreased slowly. The effect of MK-801 was long-lasting. This study confirm previous in vitro studies: 3H-TCP is an efficient tool for the labeling of the NMDA receptor-associated ionic channel

OSI and TCP/IP

Science.gov (United States)

Randolph, Lynwood P.

1994-01-01

The Open Systems Interconnection Transmission Control Protocol/Internet Protocol (OSI TCP/IP) and the Government Open Systems Interconnection Profile (GOSIP) are compared and described in terms of Federal internetworking. The organization and functions of the Federal Internetworking Requirements Panel (FIRP) are discussed and the panel's conclusions and recommendations with respect to the standards and implementation of the National Information Infrastructure (NII) are presented.

Poly (γ-glutamic acid)/beta-TCP nanocomposites via in situ copolymerization: Preparation and characterization.

Science.gov (United States)

Shu, Xiu-Lin; Shi, Qing-Shan; Feng, Jin; Yang, Yun-Hua; Zhou, Gang; Li, Wen-Ru

2016-07-01

A series biodegradable poly (γ-glutamic acid)/beta-tricalcium phosphate (γ-PGA/TCP) nanocomposites were prepared which were composed of poly-γ-glutamic acid polymerized in situ with β-tricalcium phosphate and physiochemically characterized as bone graft substitutes. The particle size via dynamic light scattering, the direct morphological characterization via transmission electron microscopy and field emission scanning electron microscope, which showed that γ-PGA and β-TCP were combined compactly at 80℃, and the γ-PGA/TCP nanocomposites had homogenous and nano-sized grains with narrow particle size distributions. The water uptake and retention abilities, in vitro degradation properties, cytotoxicity in the simulated medium, and protein release of these novel γ-PGA/TCP composites were investigated. Cell proliferation in composites was nearly twice than β-TCP when checked in vitro using MC3T3 cell line. We also envision the potential use of γ-PGA/TCP systems in bone growth factor or orthopedic drug delivery applications in future bone tissue engineering applications. These observations suggest that the γ-PGA/TCP are novel nanocomposites with great potential for application in the field of bone tissue engineering. © The Author(s) 2016.

Functional form comparison between the population and the individual Poisson based TCP models

International Nuclear Information System (INIS)

Schinkel, C.; Stavreva, N.; Stavrev, P.; Carlone, M.; Fallone, B.G.

2007-01-01

In this work, the functional form similarity between the individual and fundamental population TCP models is investigated. Using the fact that both models can be expressed in terms of the geometric parameters γ 50 and D 50 , we show that they have almost identical functional form for values of γ 50 ≥1. The conceptual inadequacy of applying an individual model to clinical data is also discussed. A general individual response TCP expression is given, parameterized by D f and γ f - the dose corresponding to a control level of f, and the normalized slope at that point. It is shown that the dose-response may be interpreted as an individual response only if γ 50 is sufficiently high. Based on the functional form equivalency between the individual and the population TCP models, we discuss the possibility of applying the individual TCP model for the case of heterogeneous irradiations. Due to the fact that the fundamental population TCP model is derived for homogeneous irradiations only, we propose the use of the EUD, given by the generalized mean dose, when the fundamental population TCP model is used to fit clinical data. (author)

DETERMINATION OF 3,5,6-TRICHLORO-2-PYRIDINOL (TCP) BY ELISA

Science.gov (United States)

A sensitive, competitive enzyme-linked immunosorbent assay (ELISA) for 3,5,6-trichloro-2pyridinol (TCP) has been developed to quantitate parts per billion (ppb) amounts of the analyte in urine. TCP is a major metabolite and environmental degradation product of the insecticide c...

Modulation of release kinetics by plasma polymerization of ampicillin-loaded β -TCP ceramics

International Nuclear Information System (INIS)

Labay, C; Buxadera-Palomero, J; Avilés, M; Canal, C; Ginebra, M P

2016-01-01

Beta-tricalcium phosphate ( β -TCP) bioceramics are employed in bone repair surgery. Their local implantation in bone defects puts them in the limelight as potential materials for local drug delivery. However, obtaining suitable release patterns fitting the required therapeutics is a challenge. Here, plasma polymerization of ampicillin-loaded β -TCP is studied for the design of a novel antibiotic delivery system. Polyethylene glycol-like (PEG-like) coating of β -TCP by low pressure plasma polymerization was performed using diglyme as precursor, and nanometric PEG-like layers were obtained by simple and double plasma polymerization processes. A significant increase in hydrophobicity, and the presence of plasma polymer was visible on the surface by SEM and quantified by XPS. As a main consequence of the plasma polymerisation, the release kinetics were successfully modified, avoiding burst release, and slowing down the initial rate of release leading to a 4.5 h delay in reaching the same antibiotic release percentage, whilst conservation of the activity of the antibiotic was simultaneously maintained. Thus, plasma polymerisation on the surface of bioceramics may be a good strategy to design controlled drug delivery matrices for local bone therapies. (paper)

Static friction of porous bioceramic beta-TCP on intestinal mucus films.

Science.gov (United States)

Wang, Xin-Yu; Han, Ying-Chao; Jiang, Xin; Dai, Hong-Lian; Li, Shi-Pu

2006-09-01

The static friction behavior between a porous bioceramic material and an intestinal mucus film was investigated in order to develop a new intestine robotic endoscope. Here, the friction couple is porous beta-tricalcium phosphate (beta-TCP) and an artificial intestine mucus film. The effect of pore size of the beta-TCP material on the friction behavior is investigated. The results illustrated that in this friction system there is a relatively small normal force upon the intestinal mucus film of the intestine wall during locomotion. The maximum static friction force in this friction couple varies with the pore size of the porous beta-TCP material.

Static friction of porous bioceramic β-TCP on intestinal mucus films

International Nuclear Information System (INIS)

Wang Xinyu; Han Yingchao; Jiang Xin; Dai Honglian; Li Shipu

2006-01-01

The static friction behavior between a porous bioceramic material and an intestinal mucus film was investigated in order to develop a new intestine robotic endoscope. Here, the friction couple is porous β-tricalcium phosphate (β-TCP) and an artificial intestine mucus film. The effect of pore size of the β-TCP material on the friction behavior is investigated. The results illustrated that in this friction system there is a relatively small normal force upon the intestinal mucus film of the intestine wall during locomotion. The maximum static friction force in this friction couple varies with the pore size of the porous β-TCP material

A Novel HA/β-TCP-Collagen Composite Enhanced New Bone Formation for Dental Extraction Socket Preservation in Beagle Dogs

Directory of Open Access Journals (Sweden)

Ko-Ning Ho

2016-03-01

Full Text Available Past studies in humans have demonstrated horizontal and vertical bone loss after six months following tooth extraction. Many biomaterials have been developed to preserve bone volume after tooth extraction. Type I collagen serves as an excellent delivery system for growth factors and promotes angiogenesis. Calcium phosphate ceramics have also been investigated because their mineral chemistry resembles human bone. The aim of this study was to compare the performance of a novel bioresorbable purified fibrillar collagen and hydroxyapatite/β-tricalcium phosphate (HA/β-TCP ceramic composite versus collagen alone and a bovine xenograft-collagen composite in beagles. Collagen plugs, bovine graft-collagen composite and HA/β-TCP-collagen composite were implanted into the left and right first, second and third mandibular premolars, and the fourth molar was left empty for natural healing. In total, 20 male beagle dogs were used, and quantitative and histological analyses of the extraction ridge was done. The smallest width reduction was 19.09% ± 8.81% with the HA/β-TCP-collagen composite at Week 8, accompanied by new bone formation at Weeks 4 and 8. The HA/β-TCP-collagen composite performed well, as a new osteoconductive and biomimetic composite biomaterial, for socket bone preservation after tooth extraction.

Quantitative localization of (/sup 3/H)TCP binding in rat brain by light microscopy autoradiography

Energy Technology Data Exchange (ETDEWEB)

Sircar, R; Zukin, S R

1985-09-30

The anatomical localization of phencyclidine (PCP)/sigma-opiate receptors in rat brain was determined by quantitative light microscopy autoradiography using the new ligand N-(1-(2-thienyl) cyclohexyl(/sup 3/H) piperidine ((/sup 3/H)TCP). TCP is a potent analog of PCP which possesses a higher affinity for PCP/sigma-opiate receptor than does PCP itself. The highest level of (/sup 3/H)TCP binding was detected in the hippocampus. Intermediate levels were found in frontal cortex, striatum, amygdala and cerebellum. Specific (/sup 3/H)TCP binding was undetectable in anterior commissure and corpus callosum. The distribution pattern of (/sup 3/H)TCP binding sites is similar to the pattern obtained with (/sup 3/H)PCP but more sharply defined. On the basis of its greater potency and specificity, (/sup 3/H)TCP may prove superior to (/sup 3/H)PCP as a molecular probe for the study of brain sigma opiate/phencyclidine receptors. 13 refs.; 1 figure; 1 table.

A Human Clinical, Histological, Histomorphometrical, and Radiographical Study on Biphasic HA-Beta-TCP 30/70 in Maxillary Sinus Augmentation.

Science.gov (United States)

Mangano, Carlo; Sinjari, Bruna; Shibli, Jamil A; Mangano, Francesco; Hamisch, Sabine; Piattelli, Adriano; Perrotti, Vittoria; Iezzi, Giovanna

2015-06-01

By mixing hydroxyapatite (HA) and tricalcium phosphate (TCP), biphasic calcium phosphate ceramics can be obtained, and by varying their ratio it is possible to tailor the characteristics of the biomaterial. The aim of the present human study was to evaluate the histological and radiographical aspects of bone formation in maxillary sinus augmentation using a 30/70 HA-beta-TCP with a reticular structure. A total of 12 patients, undergoing two-stage sinus augmentation procedure using HA-beta-TCP at a ratio of 30/70, were included in the present study. After a 6-month healing period, during implant insertion, radiographical analysis was performed, and then the bone core biopsies were harvested and processed for histology. At radiographic evaluation, the bone gain was on average 6.85 ± 0.60 mm. HA-beta-TCP 30/70 appeared to be lined by newly formed bone, with no gaps at the interface. The histomorphometric analysis revealed 26 ± 2% of residual grafted biomaterial, 29 ± 3% of newly formed bone, and 45 ± 2% of marrow spaces. The present results indicate histologically the high biocompatibility and osteoconductivity of HA-beta-TCP 30/70, and clinically its successful use for sinus augmentation procedures. © 2013 Wiley Periodicals, Inc.

ALP gene expression in cDNA samples from bone tissue engineering using a HA/TCP/Chitosan scaffold

Science.gov (United States)

Stephanie, N.; Katarina, H.; Amir, L. R.; Gunawan, H. A.

2017-08-01

This study examined the potential use of hydroxyapatite (HA)/tricalcium phosphate (TCP)/Chitosan as a bone tissue engineering scaffold. The potential for using HA/TCP/chitosan as a scaffold was analyzed by measuring expression of the ALP osteogenic gene in cDNA from bone biopsies from four Macaque nemestrina. Experimental conditions included control (untreated), treatment with HA/TCP 70:30, HA/TCP 50:50, and HA/TCP/chitosan. cDNA samples were measured quantitively with Real-Time PCR (qPCR) and semi-quantitively by gel electrophoresis. There were no significant differences in ALP gene expression between treatment subjects after two weeks, but the HA/TCP/chitosan treatment gave the highest level of expression after four weeks. The scaffold using the HA/TCP/chitosan combination induced a higher level of expression of the osteogenic gene ALP than did scaffold without chitosan.

Analyzing the Effect of TCP and Server Population on Massively Multiplayer Games

Directory of Open Access Journals (Sweden)

Mirko Suznjevic

2014-01-01

Full Text Available Many Massively Multiplayer Online Role-Playing Games (MMORPGs use TCP flows for communication between the server and the game clients. The utilization of TCP, which was not initially designed for (soft real-time services, has many implications for the competing traffic flows. In this paper we present a series of studies which explore the competition between MMORPG and other traffic flows. For that aim, we first extend a source-based traffic model, based on player’s activities during the day, to also incorporate the impact of the number of players sharing a server (server population on network traffic. Based on real traffic traces, we statistically model the influence of the variation of the server’s player population on the network traffic, depending on the action categories (i.e., types of in-game player behaviour. Using the developed traffic model we prove that while server population only modifies specific action categories, this effect is significant enough to be observed on the overall traffic. We find that TCP Vegas is a good option for competing flows in order not to throttle the MMORPG flows and that TCP SACK is more respectful with game flows than other TCP variants, namely, Tahoe, Reno, and New Reno. Other tests show that MMORPG flows do not significantly reduce their sending window size when competing against UDP flows. Additionally, we study the effect of RTT unfairness between MMORPG flows, showing that it is less important than in the case of network-limited TCP flows.

Identification of two combined genes responsible for dechlorination of 3,5,6-trichloro-2-pyridinol (TCP) in Cupriavidus pauculus P2.

Science.gov (United States)

Cao, Li; Xu, Jianhong; Wu, Guang; Li, Mingxing; Jiang, Jiandong; He, Jian; Li, Shunpeng; Hong, Qing

2013-09-15

Dehalogenation is an important mechanism for degrading and detoxifying halogenated aromatics in microbes. However, the biochemical and molecular mechanisms of dehalogenation of 3,5,6-trichloro-2-pyridinol (TCP) are still unknown. In this study, a novel 6012 bp gene cluster was cloned from TCP-degrading strain P2, which was responsible for the dehalogenation of TCP. The cluster included a monooxygenase gene (tcpA1), a flavin reductase gene (tcpB1), tcpR1, orf1 and orf2. TcpA1 and TcpB1 were indispensable for the dehalogenation of TCP. They worked together to catalyze the dehalogenation of three chlorine of TCP, and generated a more readily biodegradable product of 3,6-dihydroxypyridine-2,5-dione. TcpA1 displayed the highest activity against TCP at 40°C and at pH 8.0. Cu(2+), Zn(2+), and Hg(2+) significantly inhibited enzyme activity. To the best of our knowledge, this is the first report on a gene cluster responsible for TCP degradation. Copyright © 2013 Elsevier B.V. All rights reserved.

Robustness of Multiple High Speed TCP CUBIC Connections Under Severe Operating Conditions

DEFF Research Database (Denmark)

Pilimon, Artur; Ruepp, Sarah Renée; Berger, Michael Stübert

2015-01-01

We study the adaptation capabilities and robustness of the high-speed TCP CUBIC algorithm. For this purpose we consider a network environment with variable and high random packet loss and a large Bandwidth-Delay product, shared by multiple heterogeneous TCP connections. The analysis is based on a...

TCP/IP Communication System for Controlling a Vehicular Traffic Intersection

Directory of Open Access Journals (Sweden)

Pedraza-Martínez Luis Fernando

2013-10-01

Full Text Available This paper describes the development of a prototype of a vehicular traffic controller, whose system of communication is based on the TCP/IP protocol, in order to re- motely monitor and control the operation of traffic lights for a vehicular intersection. The results show the times of communication between the central and the traffic controller. The conclusions highlight the importance of using the TCP/IP protocol in traffic light systems.

TCP (truncated compound Poisson) process for multiplicity distributions in high energy collisions

International Nuclear Information System (INIS)

Srivastave, P.P.

1990-01-01

On using the Poisson distribution truncated at zero for intermediate cluster decay in a compound Poisson process, the authors obtain TCP distribution which describes quite well the multiplicity distributions in high energy collisions. A detailed comparison is made between TCP and NB for UA5 data. The reduced moments up to the fifth agree very well with the observed ones. The TCP curves are narrower than NB at high multiplicity tail, look narrower at very high energy and develop shoulders and oscillations which become increasingly pronounced as the energy grows. At lower energies the distributions, of the data for fixed intervals of rapidity for UA5 data and for the data (at low energy) for e + e - annihilation and pion-proton, proton-proton and muon-proton scattering. A discussion of compound Poisson distribution, expression of reduced moments and Poisson transforms are also given. The TCP curves and curves of the reduced moments for different values of the parameters are also presented

The Arabidopsis Transcription Factor AtTCP15 Regulates Endoreduplication by Modulating Expression of Key Cell-cycle Genes

Institute of Scientific and Technical Information of China (English)

Zi-Yu Li; Bin Li; Ai-Wu Dong

2012-01-01

Plant cells frequently undergo endoreduplication,a modified cell cycle in which genome is repeatedly replicated without cytokinesis.As the key step to achieve final size and function for cells,endoreduplication is prevalent during plant development.However,mechanisms to control the balance between endoreduplication and mitotic cell division are still poorly understood.Here,we show that the Arabidopsis TCP (CINCINNATA-like TEOSINTE BRANCHED1-CYCLOIDEA-PCF)-family transcription factor gene AtTCP15 is expressed in trichomes,as well as in rapidly dividing and vascular tissues.Expression of AtTCP15SRDX,AtTCP15 fused with a SRDX repressor domain,induces extra endoreduplication in trichomes and cotyledon cells in transgenic Arabidopsis.On the contrary,overexpression of AtTCP15 suppresses endoreduplication in trichomes and other examined cells.Misregulation of AtTCP15 affects the expression of several important genes involved in cell-cycle regulation.AtTCP15 protein binds directly to the promoter regions of CYCA2;3 and RETINOBLASTOMA-RELATED (RBR) genes,which play key roles in endoreduplication.Taken together,AtTCP15 plays an important role in regulating endoreduplication during Arabidopsis development.

The TCP4 transcription factor of Arabidopsis blocks cell division in yeast at G1 → S transition

International Nuclear Information System (INIS)

Aggarwal, Pooja; Padmanabhan, Bhavna; Bhat, Abhay; Sarvepalli, Kavitha; Sadhale, Parag P.; Nath, Utpal

2011-01-01

Highlights: → TCP4 is a class II TCP transcription factor, that represses cell division in Arabidopsis. → TCP4 expression in yeast retards cell division by blocking G1 → S transition. → Genome-wide expression studies and Western analysis reveals stabilization of cell cycle inhibitor Sic1, as possible mechanism. -- Abstract: The TCP transcription factors control important aspects of plant development. Members of class I TCP proteins promote cell cycle by regulating genes directly involved in cell proliferation. In contrast, members of class II TCP proteins repress cell division. While it has been postulated that class II proteins induce differentiation signal, their exact role on cell cycle has not been studied. Here, we report that TCP4, a class II TCP protein from Arabidopsis that repress cell proliferation in developing leaves, inhibits cell division by blocking G1 → S transition in budding yeast. Cells expressing TCP4 protein with increased transcriptional activity fail to progress beyond G1 phase. By analyzing global transcriptional status of these cells, we show that expression of a number of cell cycle genes is altered. The possible mechanism of G1 → S arrest is discussed.

A new method in prediction of TCP phases formation in superalloys

International Nuclear Information System (INIS)

Mousavi Anijdan, S.H.; Bahrami, A.

2005-01-01

The purpose of this investigation is to develop a model for prediction of topologically closed-packed (TCP) phases formation in superalloys. In this study, artificial neural networks (ANN), using several different network architectures, were used to investigate the complex relationships between TCP phases and chemical composition of superalloys. In order to develop an optimum ANN structure, more than 200 experimental data were used to train and test the neural network. The results of this investigation shows that a multilayer perceptron (MLP) form of the neural networks with one hidden layer and 10 nodes in the hidden layer has the lowest mean absolute error (MAE) and can be accurately used to predict the electron-hole number (N v ) and TCP phases formation in superalloys

Structural and degradation characteristics of an innovative porous PLGA/TCP scaffold incorporated with bioactive molecular icaritin

Energy Technology Data Exchange (ETDEWEB)

Xie Xinhui; Wang Xinluan; Zhang Ge; He Yixin; Liu Zhong; Peng Jiang; Qin Ling [Department of Orthopaedics and Traumatology, Chinese University of Hong Kong (Hong Kong); Wang Xiaohong; He Kai [Key Laboratory for Advanced Materials Processing Technology, Ministry of Education and Center of Organ Manufacturing, Department of Mechanical Engineering, Tsinghua University, Beijing (China); Leng Yang, E-mail: lingqin@cuhk.edu.h [Department of Mechanical Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon (Hong Kong)

2010-10-01

Phytomolecules may chemically bind to scaffold materials for medical applications. The present study used an osteoconductive porous poly(l-lactide-co-glycolide)/tricalcium phosphate (PLGA/TCP) to incorporate an exogenous phytoestrogenic molecule icaritin to form a PLGA/TCP/icaritin composite scaffold material with potential slow release of icaritin during scaffold degradation. Accordingly, the present study was designed to investigate its in vitro degradation characteristics and the release pattern of icaritin at three different doses (74 mg, 7.4 mg and 0.74 mg per 100 g PLGA/TCP, i.e. in the PLGA/TCP/icaritin-H, -M and -L groups, respectively). A PLGA/TCP/icaritin porous composite scaffold was fabricated using a computer-controlled printing machine. The PLGA/TCP/icaritin scaffolds were incubated in saline at 37 {sup 0}C for 12 weeks and the pure PLGA/TCP scaffold served as a control. During the 12 weeks in vitro degradation, the scaffolds in all four groups showed changes, including a decrease in weight, volume and pore size of the composite scaffold, while there was a decrease in acidity and an increase in Ca and lactic acid concentrations in the degradation medium, especially after 7 weeks. The rate of degradation was explained by the relationship with the content of icaritin incorporated into the scaffolds. The higher the icaritin content in the scaffolds, the slower the degradation could be observed during 12 weeks. After 12 weeks, the SEM showed that the surface of the PLGA/TCP and PLGA/TCP/icaritin-L groups was relatively smooth with a gradual decrease in number and size of the micropores, while the porous morphology on the surface of the PLGA/TCP/icaritin-M and PLGA/TCP/icaritin-H groups was partly maintained, accompanied by a decrease in phosphate (P) and calcium (Ca) contents at the surface. Though the mechanical property of the PLGA/TCP/icaritin scaffold decreased after degradation, its porous structure was maintained, which was essential for cell

{beta}-TCP porous pellets as an orthopaedic drug delivery system: ibuprofen/carrier physicochemical interactions

Energy Technology Data Exchange (ETDEWEB)

Baradari, Hiba; Damia, Chantal; Dutreih-Colas, Maggy; Champion, Eric; Chulia, Dominique; Viana, Marylene, E-mail: hiva.baradari@etu.unilim.fr [SPCTS-Centre Europeen de la Ceramique, 12 Rue Atlantis, 87068 Limoges CEDEX (France)

2011-10-15

Calcium phosphate bone substitute materials can be loaded with active substances for in situ, targeted drug administration. In this study, porous {beta}-TCP pellets were investigated as an anti-inflammatory drug carrier. Porous {beta}-TCP pellets were impregnated with an ethanolic solution of ibuprofen. The effects of contact time and concentration of ibuprofen solution on drug adsorption were studied. The ibuprofen adsorption equilibrium time was found to be one hour. The adsorption isotherms fitted to the Freundlich model, suggesting that the interaction between ibuprofen and {beta}-TCP is weak. The physicochemical characterizations of loaded pellets confirmed that the reversible physisorption of ibuprofen on {beta}-TCP pellets is due to Van der Waals forces, and this property was associated with the 100% ibuprofen release.

β-TCP porous pellets as an orthopaedic drug delivery system: ibuprofen/carrier physicochemical interactions

International Nuclear Information System (INIS)

Baradari, Hiba; Damia, Chantal; Dutreih-Colas, Maggy; Champion, Eric; Chulia, Dominique; Viana, Marylene

2011-01-01

Calcium phosphate bone substitute materials can be loaded with active substances for in situ, targeted drug administration. In this study, porous β-TCP pellets were investigated as an anti-inflammatory drug carrier. Porous β-TCP pellets were impregnated with an ethanolic solution of ibuprofen. The effects of contact time and concentration of ibuprofen solution on drug adsorption were studied. The ibuprofen adsorption equilibrium time was found to be one hour. The adsorption isotherms fitted to the Freundlich model, suggesting that the interaction between ibuprofen and β-TCP is weak. The physicochemical characterizations of loaded pellets confirmed that the reversible physisorption of ibuprofen on β-TCP pellets is due to Van der Waals forces, and this property was associated with the 100% ibuprofen release.

On TCP-based Session Initiation Protocol (SIP) Server Overload Control

OpenAIRE

Shen, Charles; Schulzrinne, Henning

2010-01-01

The Session Initiation Protocol (SIP) server overload management has attracted interest since SIP is being widely deployed in the Next Generation Networks (NGN) as a core signaling protocol. Yet all existing SIP overload control work is focused on SIP-over-UDP, despite the fact that TCP is increasingly seen as the more viable choice of SIP transport. This paper answers the following questions: is the existing TCP flow control capable of handling the SIP overload problem? If not, why and how c...

Study of TCP densification via image analysis

International Nuclear Information System (INIS)

Silva, R.C.; Alencastro, F.S.; Oliveira, R.N.; Soares, G.A.

2011-01-01

Among ceramic materials that mimic human bone, β-type tri-calcium phosphate (β-TCP) has shown appropriate chemical stability and superior resorption rate when compared to hydroxyapatite. In order to increase its mechanical strength, the material is sintered, under controlled time and temperature conditions, to obtain densification without phase change. In the present work, tablets were produced via uniaxial compression and then sintered at 1150°C for 2h. The analysis via XRD and FTIR showed that the sintered tablets were composed only by β-TCP. The SEM images were used for quantification of grain size and volume fraction of pores, via digital image analysis. The tablets showed small pore fraction (between 0,67% and 6,38%) and homogeneous grain size distribution (∼2μm). Therefore, the analysis method seems viable to quantify porosity and grain size. (author)

Communication Software Performance for Linux Clusters with Mesh Connections

Energy Technology Data Exchange (ETDEWEB)

Jie Chen; William Watson

2003-09-01

Recent progress in copper based commodity Gigabit Ethernet interconnects enables constructing clusters to achieve extremely high I/O bandwidth at low cost with mesh connections. However, the TCP/IP protocol stack cannot match the improved performance of Gigabit Ethernet networks especially in the case of multiple interconnects on a single host. In this paper, we evaluate and compare the performance characteristics of TCP/IP and M-VIA software that is an implementation of VIA.In particular, we focus on the performance of the software systems for a mesh communication architecture and demonstrate the feasibility of using multiple Gigabit Ethernet cards on one host to achieve aggregated bandwidth and latency that are not only better than what TCP provides but also compare favorably to some of the special purpose high-speed networks. In addition, implementation of a new M-VIA driver for one type of Gigabit Ethernet card will be discussed.

Nano-beta-tricalcium phosphates synthesis and biodegradation: 2. Biodegradation and apatite layer formation on nano-{beta}-TCP synthesized via microwave treatment

Energy Technology Data Exchange (ETDEWEB)

Abdel-Fattah, Wafa I; Elkhooly, Tarek A, E-mail: nrcfifi@yahoo.co [Department of Biomaterials, National Research Center, Cairo (Egypt)

2010-06-01

The degradation and/or apatite layer precipitation ability of porous {beta}-tricalcium phosphate ({beta}-TCP) samples treated and untreated with microwave radiation during synthesis is investigated. Microwave heating was used to accelerate the formation of CDHA with the Ca/P ratio 1.5 in a shorter processing time which later forms {beta}-TCP at around 650 {sup 0}C. Soaking in simulated body fluid (SBF) for several periods (4, 8, 12, 24, 36, 48, 60 and 72 h) is performed in a cumulative manner. The deposition of an apatite layer is followed through diffuse reflected FT-IR, SEM and EDS. A microwave-treated sample having a smaller particle size than its parent induces the formation of a homogeneous carbonated apatite layer on its surface. On the other hand, the parent {beta}-TCP sample exhibited less ability to induce Ca-P formation after being soaked in SBF. The formation of an apatite layer is attributed to the increase in surface area consequent to reduced particle and grain sizes besides the presence of a minor amount of hydroxyapatite phase in the microwave-treated {beta}-TCP sample. The results prove that it is possible to control the biodegradation and apatite layer formation on sintered {beta}-TCP porous disks through controlling the particle size.

In vitro study of 3D PLGA/n-HAp/β-TCP composite scaffolds with etched oxygen plasma surface modification in bone tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Roh, Hee-Sang [Department of Dental Materials, School of Dentistry, Chosun University, 309 Pilmun-daero, Dong-gu, Gwangju 61452 (Korea, Republic of); Jung, Sang-Chul [Department of Environmental Engineering, Sunchon National University, 255 Jungang-ro, Sunchon 57922 (Korea, Republic of); Kook, Min-Suk [Department of Oral and Maxillofacial Surgery, School of Dentistry, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186 (Korea, Republic of); Kim, Byung-Hoon, E-mail: kim5055@chosun.ac.kr [Department of Dental Materials, School of Dentistry, Chosun University, 309 Pilmun-daero, Dong-gu, Gwangju 61452 (Korea, Republic of)

2016-12-01

Highlights: • PLGA and PLGA/n-HAp/β-TCP scaffolds were successfully fabricated by 3D printing. • Oxygen plasma etching increases the wettability and surface roughness. • Bioceramics and oxygen plasma etching and could be used to improve the cell affinity. - Abstract: Three-dimensional (3D) scaffolds have many advantageous properties for bone tissue engineering application, due to its controllable properties such as pore size, structural shape and interconnectivity. In this study, effects on oxygen plasma surface modification and adding of nano-hydroxyapatite (n-HAp) and β-tricalcium phosphate (β-TCP) on the 3D PLGA/n-HAp/β-TCP scaffolds for improving preosteoblast cell (MC3T3-E1) adhesion, proliferation and differentiation were investigated. The 3D PLGA/n-HAp/β-TCP scaffolds were fabricated by 3D Bio-Extruder equipment. The 3D scaffolds were prepared with 0°/90° architecture and pore size of approximately 300 μm. In addition 3D scaffolds surface were etched by oxygen plasma to enhance the hydrophilic property and surface roughness. After oxygen plasma treatment, the surface chemistry and morphology were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy. And also hydrophilic property was measured by contact angle. The MC3T3-E1 cell proliferation and differentiation were investigated by MTT assay and ALP activity. In present work, the 3D PLGA/HAp/beta-TCP composite scaffold with suitable structure for the growth of osteoblast cells was successfully fabricated by 3D rapid prototyping technique. The surface hydrophilicity and roughness of 3D scaffold increased by oxygen plasma treatment had a positive effect on cell adhesion, proliferation, and differentiation. Furthermore, the differentiation of MC3T3-E1 cell was significantly enhanced by adding of n-HAp and β-TCP on 3D PLGA scaffold. As a result, combination of bioceramics and oxygen plasma treatment showed a synergistic effect on

The application of PRP combined with TCP in repairing avascular necrosis of the femoral head after femoral neck fracture in rabbit.

Science.gov (United States)

Zhang, X-L; Wang, Y-M; Chu, K; Wang, Z-H; Liu, Y-H; Jiang, L-H; Chen, X; Zhou, Z-Y; Yin, G

2018-02-01

In view of the high occurrence of avascular necrosis of the femoral head (ANFH) after femoral neck fracture and the difficulties in the treatment, our work aimed to explore the effects of platelet-rich plasma (PRP) combined with tri-calcium phosphate (TCP) on the repair of ANFH after femoral neck fracture and to provide reference for clinical treatment. Thirty New Zealand white rabbits were randomly divided into control group, TCP group, and PRP+TCP group. The rabbit ANFH model was established and femoral head tissues were collected. HE staining was used for histological observation. Image analysis and statistical analysis were used to calculate the New Bone Area fraction (NBA %). The levels of bone morphogenetic protein (BMP)-7, transforming growth factor (TGF)-β1, basic fibroblast growth factor (bFGF), interleukin (IL)-6 and tumor necrosis factor (TNF)-a in serum were detected by Enzyme-Linked ImmunoSorbent Assay (ELISA). The new bone area of TCP group was significantly lower than that of PRP+TCP group (pPRP+TCP groups (pPRP+TCP group was higher than that in TCP group. TCP and PRP+TCP can both significantly reduce the content of IL-6 and TNF-a (pPRP+TCP group compared with the TCP group at 8 weeks after injection. PRP combined with TCP, which can promote new bone formation and inhibit inflammatory response, showed higher efficiency in repairing ANFH than internal fixation alone.

The effect of Tricresyl-Phosphate (TCP) as an additive on wear of Iron (Fe)

Science.gov (United States)

Ghose, Hiren M.; Ferrante, John; Honecy, Frank C.

1987-01-01

The effect of tricresyl phosphate (TCP) as an antiwear additive in lubricant trimethyol propane triheptanoate (TMPTH) was investigated. The objective was to examine step loading wear by use of surface analysis, wetting, and chemical bonding changes in the lubricant. The investigation consisted of steploading wear studies by a pin or disk tribometer, the effects on wear related to wetting by contact angle and surface tension measurements of various liquid systems, the chemical bonding changes between lubricant and TCP chromatographic analysis, and by determining the reaction between the TCP and metal surfaces through wear scar analysis by Auger emission spectroscopy (AES). The steploading curve for the base fluid alone shows rapid increase of wear rate with load. The steploading curve for the base fluid in presence of 4.25 percent by volume TCP under dry air purge has shown a great reduction of wear rate with all loads studied. It has also been found that the addition of 4.25 percent by volume TCP plus 0.33 percent by volume water to the base lubricant under N2 purge also greatly reduces the wear rate with all loads studied. AES surface analysis reveals a phosphate type wear resistant film, which greatly increases load-bearing capacity, formed on the iron disk. Preliminary chromatographic studies suggest that this film forms either because of ester oxidation or TCP degradation. Wetting studies show direct correlation between the spreading coefficient and the wear rate.

Cascade Probability Control to Mitigate Bufferbloat under Multiple Real-World TCP Stacks

Directory of Open Access Journals (Sweden)

Hoang-Linh To

2015-01-01

Full Text Available Persistently full buffer problem, commonly known as bufferbloat, causes unnecessary additional latency and throughput degradation whenever congestion happens in Internet. Several proposed queue management schemes, with the debloat mission, are almost based on the modification of one-loop feedback control where the instability and bad transient behavior are still big challenges. In this paper, we present a cascade probability control scheme using margin optimal method to address such challenges under different kinds of real-world TCP stacks. Simulation results guarantee the measured round trip time tracking to a low value of delay (e.g., ≈180 ms under TCP Reno, and ≈130 ms under TCP Cubic and ≈50% delay reduction in comparison to current deployed queue management schemes in network devices.

TCP/IP Network Administration

CERN Document Server

Hunt, Craig

2002-01-01

This complete guide to setting up and running a TCP/IP network is essential for network administrators, and invaluable for users of home systems that access the Internet. The book starts with the fundamentals -- what protocols do and how they work, how addresses and routing are used to move data through the network, how to set up your network connection -- and then covers, in detail, everything you need to know to exchange information via the Internet. Included are discussions on advanced routing protocols (RIPv2, OSPF, and BGP) and the gated software package that implements them, a tutorial

Combining phylogenetic and syntenic analyses for understanding the evolution of TCP ECE genes in eudicots.

Directory of Open Access Journals (Sweden)

Hélène L Citerne

Full Text Available TCP ECE genes encode transcription factors which have received much attention for their repeated recruitment in the control of floral symmetry in core eudicots, and more recently in monocots. Major duplications of TCP ECE genes have been described in core eudicots, but the evolutionary history of this gene family is unknown in basal eudicots. Reconstructing the phylogeny of ECE genes in basal eudicots will help set a framework for understanding the functional evolution of these genes. TCP ECE genes were sequenced in all major lineages of basal eudicots and Gunnera which belongs to the sister clade to all other core eudicots. We show that in these lineages they have a complex evolutionary history with repeated duplications. We estimate the timing of the two major duplications already identified in the core eudicots within a timeframe before the divergence of Gunnera and after the divergence of Proteales. We also use a synteny-based approach to examine the extent to which the expansion of TCP ECE genes in diverse eudicot lineages may be due to genome-wide duplications. The three major core-eudicot specific clades share a number of collinear genes, and their common evolutionary history may have originated at the γ event. Genomic comparisons in Arabidopsis thaliana and Solanumlycopersicum highlight their separate polyploid origin, with syntenic fragments with and without TCP ECE genes showing differential gene loss and genomic rearrangements. Comparison between recently available genomes from two basal eudicots Aquilegiacoerulea and Nelumbonucifera suggests that the two TCP ECE paralogs in these species are also derived from large-scale duplications. TCP ECE loci from basal eudicots share many features with the three main core eudicot loci, and allow us to infer the makeup of the ancestral eudicot locus.

Effects of concomitant use of fibroblast growth factor (FGF)-2 with beta-tricalcium phosphate (β-TCP) on the beagle dog 1-wall periodontal defect model

International Nuclear Information System (INIS)

Anzai, Jun; Kitamura, Masahiro; Nozaki, Takenori; Nagayasu, Toshie; Terashima, Akio; Asano, Taiji; Murakami, Shinya

2010-01-01

Research highlights: → Concomitant use of FGF-2 and β-TCP (an osteo-conductive scaffold) significantly promotes periodontal regeneration in the severe periodontitis model (1-wall defect model) of beagle dog. → FGF-2 enhanced new bone formation via β-TCP at the defects. → In particular, FGF-2 dramatically regenerated new periodontal ligament and cementum formations at the defects, that is one of the most important healing outcomes during the process of periodontal regeneration. → Epithelial downgrowth (undesirable wound healing) was decreased by administration of FGF-2. → This manuscript indicates for the first time that concomitant use of FGF-2 and β-TCP is efficacious in regenerating periodontal tissue following severe destruction of the tissue by progression of periodontitis. -- Abstract: The effects of concomitant use of fibroblast growth factor-2 (FGF-2) and beta-tricalcium phosphate (β-TCP) on periodontal regeneration were investigated in the beagle dog 1-wall periodontal defect model. One-wall periodontal defects were created in the mesial portion of both sides of the mandibular first molars, and 0.3% FGF-2 plus β-TCP or β-TCP alone was administered. Radiographic evaluation was performed at 0, 3, and 6 weeks. At 6 weeks, the periodontium with the defect site was removed and histologically analyzed. Radiographic findings showed that co-administration of FGF-2 significantly increased bone mineral contents of the defect sites compared with β-TCP alone. Histologic analysis revealed that the length of the regenerated periodontal ligament, the cementum, distance to the junctional epithelium, new bone height, and area of newly formed bone were significantly increased in the FGF-2 group. No abnormal inflammatory response or ankylosis was observed in either group. These findings indicate the efficacy of concomitant use of FGF-2 and β-TCP as an osteoconductive material for periodontal regeneration following severe destruction by progressive

Effects of concomitant use of fibroblast growth factor (FGF)-2 with beta-tricalcium phosphate ({beta}-TCP) on the beagle dog 1-wall periodontal defect model

Energy Technology Data Exchange (ETDEWEB)

Anzai, Jun, E-mail: anzai_jun@kaken.co.jp [Pharmacology Department, Central Research Laboratories, Kaken Pharmaceutical Co., Ltd., 14, Shinomiya, Minamigawara-cho, Yamashina-ku, Kyoto 607-8042 (Japan); Department of Periodontology, Osaka University Graduate School of Dentistry, 1-8 Yamadaoka, Suita, Osaka 565-0871 (Japan); Kitamura, Masahiro, E-mail: kitamura@dent.osaka-u.ac.jp [Department of Periodontology, Osaka University Graduate School of Dentistry, 1-8 Yamadaoka, Suita, Osaka 565-0871 (Japan); Nozaki, Takenori, E-mail: tnozaki@dent.osaka-u.ac.jp [Department of Periodontology, Osaka University Graduate School of Dentistry, 1-8 Yamadaoka, Suita, Osaka 565-0871 (Japan); Nagayasu, Toshie, E-mail: nagayasu_toshie@kaken.co.jp [Pharmacology Department, Central Research Laboratories, Kaken Pharmaceutical Co., Ltd., 14, Shinomiya, Minamigawara-cho, Yamashina-ku, Kyoto 607-8042 (Japan); Terashima, Akio, E-mail: terashima_akio@kaken.co.jp [Pharmacology Department, Central Research Laboratories, Kaken Pharmaceutical Co., Ltd., 14, Shinomiya, Minamigawara-cho, Yamashina-ku, Kyoto 607-8042 (Japan); Asano, Taiji, E-mail: asano_taiji@kaken.co.jp [Pharmacology Department, Central Research Laboratories, Kaken Pharmaceutical Co., Ltd., 14, Shinomiya, Minamigawara-cho, Yamashina-ku, Kyoto 607-8042 (Japan); Murakami, Shinya, E-mail: ipshinya@dent.osaka-u.ac.jp [Department of Periodontology, Osaka University Graduate School of Dentistry, 1-8 Yamadaoka, Suita, Osaka 565-0871 (Japan)

2010-12-17

Research highlights: {yields} Concomitant use of FGF-2 and {beta}-TCP (an osteo-conductive scaffold) significantly promotes periodontal regeneration in the severe periodontitis model (1-wall defect model) of beagle dog. {yields} FGF-2 enhanced new bone formation via {beta}-TCP at the defects. {yields} In particular, FGF-2 dramatically regenerated new periodontal ligament and cementum formations at the defects, that is one of the most important healing outcomes during the process of periodontal regeneration. {yields} Epithelial downgrowth (undesirable wound healing) was decreased by administration of FGF-2. {yields} This manuscript indicates for the first time that concomitant use of FGF-2 and {beta}-TCP is efficacious in regenerating periodontal tissue following severe destruction of the tissue by progression of periodontitis. -- Abstract: The effects of concomitant use of fibroblast growth factor-2 (FGF-2) and beta-tricalcium phosphate ({beta}-TCP) on periodontal regeneration were investigated in the beagle dog 1-wall periodontal defect model. One-wall periodontal defects were created in the mesial portion of both sides of the mandibular first molars, and 0.3% FGF-2 plus {beta}-TCP or {beta}-TCP alone was administered. Radiographic evaluation was performed at 0, 3, and 6 weeks. At 6 weeks, the periodontium with the defect site was removed and histologically analyzed. Radiographic findings showed that co-administration of FGF-2 significantly increased bone mineral contents of the defect sites compared with {beta}-TCP alone. Histologic analysis revealed that the length of the regenerated periodontal ligament, the cementum, distance to the junctional epithelium, new bone height, and area of newly formed bone were significantly increased in the FGF-2 group. No abnormal inflammatory response or ankylosis was observed in either group. These findings indicate the efficacy of concomitant use of FGF-2 and {beta}-TCP as an osteoconductive material for periodontal

Network and User-Perceived Performance of Web Page Retrievals

Science.gov (United States)

Kruse, Hans; Allman, Mark; Mallasch, Paul

1998-01-01

The development of the HTTP protocol has been driven by the need to improve the network performance of the protocol by allowing the efficient retrieval of multiple parts of a web page without the need for multiple simultaneous TCP connections between a client and a server. We suggest that the retrieval of multiple page elements sequentially over a single TCP connection may result in a degradation of the perceived performance experienced by the user. We attempt to quantify this perceived degradation through the use of a model which combines a web retrieval simulation and an analytical model of TCP operation. Starting with the current HTTP/l.1 specification, we first suggest a client@side heuristic to improve the perceived transfer performance. We show that the perceived speed of the page retrieval can be increased without sacrificing data transfer efficiency. We then propose a new client/server extension to the HTTP/l.1 protocol to allow for the interleaving of page element retrievals. We finally address the issue of the display of advertisements on web pages, and in particular suggest a number of mechanisms which can make efficient use of IP multicast to send advertisements to a number of clients within the same network.

MICROCT AND PREPARATION OF ß-TCP GRANULAR MATERIAL BY THE POLYURETHANE FOAM METHOD

Directory of Open Access Journals (Sweden)

Robert Filmon

2011-05-01

Full Text Available Commercial ß-tricalcium phosphate (ß-TCP is commercialy available in granules manufactured by sintering of powders. We have evaluated the different steps of the manufacturing process of ß-TCP ceramics granules prepared from blocks obtained with the polyurethane foam technology. Three types of slurry were prepared with 10, 15 and 25 g of ß-TCP per gram of polyurethane foam. Analysis was done by scanning electron microscopy, EDX, Raman spectroscopy and microcomputed tomography combined with image analysis. A special algorithm was used to identify the internal microporosity (created by the calcination of the foam from the internal macroporosity due to the spatial repartition of the material. The low ß-TCP dosages readily infiltrated the foam and the slurry was deposited along the polymer rods. On the contrary, the highest concentration produced inhomogeneous infiltrated blocks and foam cavities appeared completely filled in some areas. 2D microcomputed sections and reconstructed 3D models evidenced this phenomenon and the frequency distribution of the thickness and separation of material trabeculae confirmed the heterogeneity of the distribution. When crushed, blocks prepared with the 25 g slurry provided the largest and irregular granulates.

Design of feedback controller for TCP/AQM networks

Directory of Open Access Journals (Sweden)

Sukant Kishoro Bisoy

2017-02-01

Full Text Available In this paper, we propose a novel proportional-differential-type feedback controller called Novel-PD as new active queue management (AQM to regulate the queue length with small oscillation. It measures the current queue length and uses the current queue length and differential error signals to adjust packet drop probability dynamically. We provide control theoretic analysis of system stability and develop guidelines to select control gain parameters of Novel-PD. The design of Novel-PD for TCP/AQM system is given in details. NS2 is used for conducting extensive simulation. The proposed controller is compared with random early detection (RED, random exponential marking (REM, proportional integrator (PI and proportional derivative (PD controller. Result shows that, Novel-PD is stable and achieves faster response in dynamic environments where number of TCP connections, bottleneck capacity, round trip time (RTT keeps changing. The proposed controller outperforms other AQM schemes.

Evaluation of 3D printed PCL/PLGA/β-TCP versus collagen membranes for guided bone regeneration in a beagle implant model.

Science.gov (United States)

Won, J-Y; Park, C-Y; Bae, J-H; Ahn, G; Kim, C; Lim, D-H; Cho, D-W; Yun, W-S; Shim, J-H; Huh, J-B

2016-10-07

Here, we compared 3D-printed polycaprolactone/poly(lactic-co-glycolic acid)/β-tricalcium phosphate (PCL/PLGA/β-TCP) membranes with the widely used collagen membranes for guided bone regeneration (GBR) in beagle implant models. For mechanical property comparison in dry and wet conditions and cytocompatibility determination, we analyzed the rate and pattern of cell proliferation of seeded fibroblasts and preosteoblasts using the cell counting kit-8 assay and scanning electron microscopy. Osteogenic differentiation was verified using alizarin red S staining. At 8 weeks following implantation in vivo using beagle dogs, computed tomography and histological analyses were performed after sacrifice. Cell proliferation rates in vitro indicated that early cell attachment was higher in collagen than in PCL/PLGA/β-TCP membranes; however, the difference subsided by day 7. Similar outcomes were found for osteogenic differentiation, with approximately 2.5 times greater staining in collagen than PCL/PLGA/β-TCP, but without significant difference by day 14. In vivo, bone regeneration in the defect area, represented by new bone formation and bone-to-implant contact, paralleled those associated with collagen membranes. However, tensile testing revealed that whereas the PCL/PLGA/β-TCP membrane mechanical properties were conserved in both wet and dry states, the tensile property of collagen was reduced by 99% under wet conditions. Our results demonstrate in vitro and in vivo that PCL/PLGA/β-TCP membranes have similar levels of biocompatibility and bone regeneration as collagen membranes. In particular, considering that GBR is always applied to a wet environment (e.g. blood, saliva), we demonstrated that PCL/PLGA/β-TCP membranes maintained their form more reliably than collagen membranes in a wet setting, confirming their appropriateness as a GBR membrane.

Low modulus and bioactive Ti/α-TCP/Ti-mesh composite prepared by spark plasma sintering.

Science.gov (United States)

Guo, Yu; Tan, Yanni; Liu, Yong; Liu, Shifeng; Zhou, Rui; Tang, Hanchun

2017-11-01

A titanium mesh scaffold composite filled with Ti/α-TCP particles was prepared by spark plasma sintering (SPS). The microstructures and interfacial reactions of the composites were investigated by scanning electron microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-ray diffraction (XRD) analyses. The compressive strength and elastic modulus were also measured. In vitro bioactivity and biocompatibility was evaluated by using simulated body fluid and cells culture, respectively. After high temperature sintering, Ti oxides, Ti x P y and CaTiO 3 were formed. The formation of Ti oxides and Ti x P y were resulted from the diffusion of O and P elements from α-TCP to Ti. CaTiO 3 was the reaction product of Ti and α-TCP. The composite of 70Ti/α-TCP incorporated with Ti mesh showed a high compressive strength of 589MPa and a low compressive modulus of 30GPa. The bioactivity test showed the formation of a thick apatite layer on the composite and well-spread cells attachment. A good combination of mechanical properties and bioactivity indicated a high potential application of Ti/α-TCP/Ti-mesh composite for orthopedic implants. Copyright © 2017. Published by Elsevier B.V.

Synthesis of 3-[18F]-fluoromethyl-TCP1, a potential tool for PET study of the NMDA receptor channel complex

International Nuclear Information System (INIS)

Ponchant, M.; Crouzel, C.

1992-01-01

In an attempt to visualize the NMDA glutamatergic receptors and after checking the biological activity of the cold 3-fluoromethyl-TCP, 3-[ 18 F]-fluoro-methyl-TCP was synthesized by a nucleophilic substitution of 3-bromomethyl-TCP with [ 18 F - ]. (author)

A novel vascular-targeting peptide for gastric cancer delivers low-dose TNFα to normalize the blood vessels and improve the anti-cancer efficiency of 5-fluorouracil.

Science.gov (United States)

Lu, Lan; Li, Zhi Jie; Li, Long Fei; Shen, Jing; Zhang, Lin; Li, Ming Xing; Xiao, Zhan Gang; Wang, Jian Hao; Cho, Chi Hin

2017-11-01

Various vascular-targeted agents fused with tumor necrosis factor α (TNFα) have been shown to improve drug absorption into tumor tissues and enhance tumor vascular function. TCP-1 is a peptide selected through in vivo phage library biopanning against a mouse orthotopic colorectal cancer model and is a promising agent for drug delivery. This study further investigated the targeting ability of TCP-1 phage and peptide to blood vessels in an orthotopic gastric cancer model in mice and assessed the synergistic anti-cancer effect of 5-fluorouracil (5-FU) with subnanogram TNFα targeted delivered by TCP-1 peptide. In vivo phage targeting assay and in vivo colocalization analysis were carried out to test the targeting ability of TCP-1 phage/peptide. A targeted therapy for improvement of the therapeutic efficacy of 5-FU and vascular function was performed through administration of TCP-1/TNFα fusion protein in this model. TCP-1 phage exhibited strong homing ability to the orthotopic gastric cancer after phage injection. Immunohistochemical staining suggested that and TCP-1 phage/TCP-1 peptide could colocalize with tumor vascular endothelial cells. TCP-1/TNFα combined with 5-FU was found to synergistically inhibit tumor growth, induce apoptosis and reduce cell proliferation without evident toxicity. Simultaneously, subnanogram TCP-1/TNFα treatment normalized tumor blood vessels. Targeted delivery of low-dose TNFα by TCP-1 peptide can potentially modulate the vascular function of gastric cancer and increase the drug delivery of chemotherapeutic drugs. Copyright © 2017. Published by Elsevier Inc.

Tricalcium phosphate/hydroxyapatite (TCP-HA) bone scaffold as potential candidate for the formation of tissue engineered bone.

Science.gov (United States)

Sulaiman, Shamsul Bin; Keong, Tan Kok; Cheng, Chen Hui; Saim, Aminuddin Bin; Idrus, Ruszymah Bt Hj

2013-06-01

Various materials have been used as scaffolds to suit different demands in tissue engineering. One of the most important criteria is that the scaffold must be biocompatible. This study was carried out to investigate the potential of HA or TCP/HA scaffold seeded with osteogenic induced sheep marrow cells (SMCs) for bone tissue engineering. HA-SMC and TCP/HA-SMC constructs were induced in the osteogenic medium for three weeks prior to implantation in nude mice. The HA-SMC and TCP/HA-SMC constructs were implanted subcutaneously on the dorsum of nude mice on each side of the midline. These constructs were harvested after 8 wk of implantation. Constructs before and after implantation were analyzed through histological staining, scanning electron microscope (SEM) and gene expression analysis. The HA-SMC constructs demonstrated minimal bone formation. TCP/HA-SMC construct showed bone formation eight weeks after implantation. The bone formation started on the surface of the ceramic and proceeded to the centre of the pores. H&E and Alizarin Red staining demonstrated new bone tissue. Gene expression of collagen type 1 increased significantly for both constructs, but more superior for TCP/HA-SMC. SEM results showed the formation of thick collagen fibers encapsulating TCP/HA-SMC more than HA-SMC. Cells attached to both constructs surface proliferated and secreted collagen fibers. The findings suggest that TCP/HA-SMC constructs with better osteogenic potential compared to HA-SMC constructs can be a potential candidate for the formation of tissue engineered bone.

Influence of different naf concentration on the mechanical and morphological properties on sintered β-TCP

International Nuclear Information System (INIS)

Saito, L.; Cardoso, H.A.I.; Zavaglia, C.A.C.; Motisuke, M.

2011-01-01

Among the bioceramics, [beta]-tricalcium phosphate, β-TCP, is currently used in biomedical applications due to its in vivo reabsorption and chemical composition, important for bone formation and repair. Researchers showed that the addition of sodium fluoride (NaF) up to 2wt.% increases β-TCP mechanical properties without altering its biocompatibility and bioactivity. In this work, the effect of different NaF concentrations (2wt.% to 5wt.%) on β-TCP properties was studied. The samples were sintered at 1250 deg C during four hours. Afterwards, it were determined its mechanical resistance, density, morphology and chemical composition as a function of NaF content. The results showed that the presence of NaF does not lead to an increase on the mechanical properties. This fact is probably related to the formation of a mixture of TCP, apatite and sodium and calcium phosphates; and a visible increase on samples' density.(author)

Human Urine Derived Stem Cells in Combination with β-TCP Can Be Applied for Bone Regeneration.

Directory of Open Access Journals (Sweden)

Junjie Guan

Full Text Available Bone tissue engineering requires highly proliferative stem cells that are easy to isolate. Human urine stem cells (USCs are abundant and can be easily harvested without using an invasive procedure. In addition, in our previous studies, USCs have been proved to be able to differentiate into osteoblasts, chondrocytes, and adipocytes. Therefore, USCs may have great potential and advantages to be applied as a cell source for tissue engineering. However, there are no published studies that describe the interactions between USCs and biomaterials and applications of USCs for bone tissue engineering. Therefore, the objective of the present study was to evaluate the interactions between USCs with a typical bone tissue engineering scaffold, beta-Tricalcium Phosphate (β-TCP, and to determine whether the USCs seeded onto β-TCP scaffold can promote bone regeneration in a segmental femoral defect of rats. Primary USCs were isolated from urine and seeded on β-TCP scaffolds. Results showed that USCs remained viable and proliferated within β-TCP. The osteogenic differentiation of USCs within the scaffolds was demonstrated by increased alkaline phosphatase activity and calcium content. Furthermore, β-TCP with adherent USCs (USCs/β-TCP were implanted in a 6-mm critical size femoral defect of rats for 12 weeks. Bone regeneration was determined using X-ray, micro-CT, and histologic analyses. Results further demonstrated that USCs in the scaffolds could enhance new bone formation, which spanned bone defects in 5 out of 11 rats while β-TCP scaffold alone induced modest bone formation. The current study indicated that the USCs can be used as a cell source for bone tissue engineering as they are compatible with bone tissue engineering scaffolds and can stimulate the regeneration of bone in a critical size bone defect.

A TCP/IP transport layer for the DAQ of the CMS experiment

International Nuclear Information System (INIS)

Kozlovszky, M.

2004-01-01

The CMS collaboration is currently investigating various networking technologies that may meet the requirements of the CMS Data Acquisition System (DAQ). During this study, a peer transport component based on TCP/IP has been developed using object-oriented techniques for the distributed DAQ framework named XDAQ. This framework has been designed to facilitate the development of distributed data acquisition systems within the CMS Experiment. The peer transport component has to meet 3 main requirements. Firstly, it had to provide fair access to the communication medium for competing applications. Secondly, it had to provide as much of the available bandwidth to the application layer as possible. Finally, it had to hide the complexity of using non-blocking TCP/IP connections from the application layer. This paper describes the development of the peer transport component and then presents and draws conclusions on the measurements made during tests. The major topics investigated include: blocking versus non-blocking communication, TCP/IP configuration options, multi-rail connections

Geometrical versus Random β-TCP Scaffolds: Exploring the Effects on Schwann Cell Growth and Behavior.

Directory of Open Access Journals (Sweden)

Lauren Sweet

Full Text Available Numerous studies have demonstrated that Schwann cells (SCs play a role in nerve regeneration; however, their role in innervating a bioceramic scaffold for potential application in bone regeneration is still unknown. Here we report the cell growth and functional behavior of SCs on β-tricalcium phosphate (β-TCP scaffolds arranged in 3D printed-lattice (P-β-TCP and randomly-porous, template-casted (N-β-TCP structures. Our results indicate that SCs proliferated well and expressed the phenotypic markers p75LNGFR and the S100-β subunit of SCs as well as displayed growth morphology on both scaffolds, but SCs showed spindle-shaped morphology with a significant degree of SCs alignment on the P-β-TCP scaffolds, seen to a lesser degree in the N-β-TCP scaffold. The gene expressions of nerve growth factor (β-ngf, neutrophin-3 (nt-3, platelet-derived growth factor (pdgf-bb, and vascular endothelial growth factor (vegf-a were higher at day 7 than at day 14. While no significant differences in protein secretion were measured between these last two time points, the scaffolds promoted the protein secretion at day 3 compared to that on the cell culture plates. These results together imply that the β-TCP scaffolds can support SC cell growth and that the 3D-printed scaffold appeared to significantly promote the alignment of SCs along the struts. Further studies are needed to investigate the early and late stage relationship between gene expression and protein secretion of SCs on the scaffolds with refined characteristics, thus better exploring the potential of SCs to support vascularization and innervation in synthetic bone grafts.

Brucella TIR-like protein TcpB/Btp1 specifically targets the host adaptor protein MAL/TIRAP to promote infection.

Science.gov (United States)

Li, Wenna; Ke, Yuehua; Wang, Yufei; Yang, Mingjuan; Gao, Junguang; Zhan, Shaoxia; Xinying, Du; Huang, Liuyu; Li, Wenfeng; Chen, Zeliang; Li, Juan

2016-08-26

Brucella spp. are known to avoid host immune recognition and weaken the immune response to infection. Brucella like accomplish this by employing two clever strategies, called the stealth strategy and hijacking strategy. The TIR domain-containing protein (TcpB/Btp1) of Brucella melitensis is thought to be involved in inhibiting host NF-κB activation by binding to adaptors downstream of Toll-like receptors. However, of the five TIR domain-containing adaptors conserved in mammals, whether MyD88 or MAL, even other three adaptors, are specifically targeted by TcpB has not been identified. Here, we confirmed the effect of TcpB on B.melitensis virulence in mice and found that TcpB selectively targets MAL. By using siRNA against MAL, we found that TcpB from B.melitensis is involved in intracellular survival and that MAL affects intracellular replication of B.melitensis. Our results confirm that TcpB specifically targets MAL/TIRAP to disrupt downstream signaling pathways and promote intra-host survival of Brucella spp. Copyright © 2016 Elsevier Inc. All rights reserved.

The battle between standards: TCP/IP vs OSI victory through path dependency or by quality?

NARCIS (Netherlands)

Maathuis, Ivo; Smit, Willem A.; Egyedi, T.M.; Krechmer, K.; Jakobs, K.

2003-01-01

Between the end of the 1970s and 1994 a fierce competition existed between two possible standards, TCP/IP and OSI, to solve the problem of interoperability of computer networks. Around 1994 it became evident that TCP/IP and not OSI had become the dominant standard. We specifically deal with the

SET: Session Layer-Assisted Efficient TCP Management Architecture for 6LoWPAN with Multiple Gateways

Directory of Open Access Journals (Sweden)

Akbar AliHammad

2010-01-01

Full Text Available 6LoWPAN (IPv6 based Low-Power Personal Area Network is a protocol specification that facilitates communication of IPv6 packets on top of IEEE 802.15.4 so that Internet and wireless sensor networks can be inter-connected. This interconnection is especially required in commercial and enterprise applications of sensor networks where reliable and timely data transfers such as multiple code updates are needed from Internet nodes to sensor nodes. For this type of inbound traffic which is mostly bulk, TCP as transport layer protocol is essential, resulting in end-to-end TCP session through a default gateway. In this scenario, a single gateway tends to become the bottleneck because of non-uniform connectivity to all the sensor nodes besides being vulnerable to buffer overflow. We propose SET; a management architecture for multiple split-TCP sessions across a number of serving gateways. SET implements striping and multiple TCP session management through a shim at session layer. Through analytical modeling and ns2 simulations, we show that our proposed architecture optimizes communication for ingress bulk data transfer while providing associated load balancing services. We conclude that multiple split-TCP sessions managed in parallel across a number of gateways result in reduced latency for bulk data transfer and provide robustness against gateway failures.

Study of Radiation Induced Radicals in HAP and β-TCP Based Bone Graft Materials by ERP Spectroscopy

International Nuclear Information System (INIS)

Maltar-Strmecki, N.; Matkovic, I.

2013-01-01

Calcium phosphates such as beta-tricalcium phosphate (β-TCP) and hydroxyapatite (HAP) are frequently used as dental implants due to proven excellent biocompatibility. Because of their resorption in the body and direct contact with tissues, in order to inactivate bacteria, fungal spores and viruses, they are usually sterilized by γ-irradiation. However, literature provides little information about effects of γ-irradiation on the formation and stability of the free radicals in the bone graft materials during and after sterilization procedure. In this study EPR (electron paramagnetic resonance) spectroscopy was used to investigate HAP and β-TCP based dental implants present on the market. Eight dental graft materials present on the market were investigated: Bioresorb R Macropore, Poresorb R -TCP, Easy-Graft T M and Cerasorb R synthetic β-tricalcium phosphates, Easy-Graft T M crystal and Ossceram R two phase synthetic CaP consisting of 60 % HAP and 40 % β-TCP, and Dexabone R and Bio-Oss R bone graft material of bovine origin. EPR study shows that this is the only technique for characterization of free radicals that can simultaneously determine not only the presence and content, but also the position and the structure of free radicals formed by γ-sterilization in the investigated materials, as well as the paramagnetic substitutions incorporated in the materials during the synthesis (such as Mn 2+ , Fe 3+ or Cr 2+ ). Additionally, EPR provides information on stability of irradiation-induced radicals (CO 2 - , trapped H-atoms, NO 3 2 etc.) and processes for reducing them. Results show that EPR should be considered as a valuable technique in improving the quality of bone graft materials, which must be sterile, and to offer the high quality, efficacy and reliable materials to the patients.(author)

DeltaShaper: Enabling Unobservable Censorship-resistant TCP Tunneling over Videoconferencing Streams

Directory of Open Access Journals (Sweden)

Barradas Diogo

2017-10-01

Full Text Available This paper studies the possibility of using the encrypted video channel of widely used videoconferencing applications, such as Skype, as a carrier for unobservable covert TCP/IP communications. We propose and evaluate different alternatives to encode information in the video stream in order to increase available throughput while preserving the packet-level characteristics of the video stream. We have built a censorship-resistant system, named DeltaShaper, which offers a data-link interface and supports TCP/IP applications that tolerate low throughput / high latency links. Our results show that it is possible to run standard protocols such as FTP, SMTP, or HTTP over Skype video streams.

Biocompatibility evaluation of HDPE-UHMWPE reinforced β-TCP nanocomposites using highly purified human osteoblast cells.

Science.gov (United States)

Shokrgozar, M A; Farokhi, M; Rajaei, F; Bagheri, M H A; Azari, Sh; Ghasemi, I; Mottaghitalab, F; Azadmanesh, K; Radfar, J

2010-12-15

Biocompatibility of β-TCP/HDPE-UHMWPE nanocomposite as a new bone substitute material was evaluated by using highly purified human osteoblast cells. Human osteoblast cells were isolated from bone tissue and characterized by immunofluorescence Staining before and after purification using magnetic bead system. Moreover, proliferation, alkaline phosphatase production, cell attachment, calcium deposition, gene expression, and morphology of osteoblast cells on β-TCP/HDPE-UHMWPE nanocomposites were evaluated. The results have shown that the human osteoblast cells were successfully purified and were suitable for subsequent cell culturing process. The high proliferation rate of osteoblast cells on β-TCP/HDPE-UHMWPE nanocomposite confirmed the great biocompatibility of the scaffold. Expression of bone-specific genes was taken place after the cells were incubated in composite extract solutions. Furthermore, osteoblast cells were able to mineralize the matrix next to composite samples. Scanning electron microscopy demonstrated that cells had normal morphology on the scaffold. Thus, these results indicated that the nanosized β-TCP/HDPE-UHMWPE blend composites could be potential scaffold, which is used in bone tissue engineering. Copyright © 2010 Wiley Periodicals, Inc.

Genomewide analysis of TCP transcription factor gene family in ...

Indian Academy of Sciences (India)

2014-12-09

Dec 9, 2014 ... study of a genomewide analysis of apple TCP gene family. These results provide .... synthesize the first-strand cDNA using the PrimeScript First. Strand cDNA ..... only detected in the stem, leaf and fruit (figure 8). When.

Effects of BMP-2 and dexamethasone on osteogenic differentiation of rat dental follicle progenitor cells seeded on three-dimensional β-TCP

International Nuclear Information System (INIS)

Xu Lulu; Jin Zuolin; Duan Yinzhong; Liu Hongchen; Wang Dongsheng; E Lingling; Xu Lin

2009-01-01

The aim of this study was to investigate the effects of BMP-2 and dexamethasone (Dex) on osteogenic differentiation of rat dental follicle progenitor cells (RDFCs) seeded on three-dimensional β-TCP. The alkaline phosphatase (ALP), the calcium and phosphonium, the osteocalcin in media of the third passage RDFCs on biomaterial β-TCP after 1-3, 3-7, 7-14 days of culture were examined respectively. The growth of cells on the scaffolds was observed by scanning electron microscope (SEM) after 3, 7 days of culture and by implanting in the backs of severe combined immunodeficient (SCID) mice for bone regeneration. The third passage RDFCs could be seen adhered, extended and proliferated on the β-TCP by scanning electron microscopy. The ALP activity, the calcium and phosphoniums and the osteocalcin content of dexamethasone (10 -8 M) or/and BMP-2 (100 ng ml -1 ) were significantly higher than their existence in the control group. They were the significantly highest among four groups after joint application of BMP-2 and dexamethasone. After 8 weeks of implantation, the percentage of the new bones formed area in the RDFCs+β-TCP+BMP-2+Dex group was significantly higher than that in the RDFCs+β-TCP+BMP-2 group. In contrast, β-TCP, RDFCs+β-TCP+Dex and control constructs lacked new bone formation by histological staining and histomorphometric analysis. The BMP-2+Dex could significantly promote osteogenic differentiation of RDFCs on β-TCP. β-TCP supported fast cellular adhesion, proliferation and differentiation of RDFCs. The feasibility of its application in periodontal tissue engineering was also proved.

Effect of Water-Glass Coating on HA and HA-TCP Samples for MSCs Adhesion, Proliferation, and Differentiation

Directory of Open Access Journals (Sweden)

Indu Bajpai

2016-01-01

Full Text Available Ca-P and silicon based materials have become very popular as bone tissue engineering materials. In this study, water-glass (also known as sodium silicate glass was coated on sintered hydroxyapatite (HA and HA-TCP (TCP stands for tricalcium phosphate samples and subsequently heat-treated at 600°C for 2 hrs. X-rays diffraction showed the presence of β- and α-TCP phases along with HA in the HA-TCP samples. Samples without coating, with water-glass coating, and heat-treated after water-glass coating were used to observe the adhesion and proliferation response of bone marrow derived-mesenchymal stem cells (MSCs. Cell culture was carried out for 4 hrs, 1 day, and 7 days. Interestingly, all samples showed similar response for cell adhesion and proliferation up to 7-day culture but fibronectin, E-cadherin, and osteogenic differentiation related genes (osteocalcin and osteopontin were significantly induced in heat-treated water-glass coated HA-TCP samples. A water-glass coating on Ca-P samples was not found to influence the cell proliferation response significantly but activated some extracellular matrix genes and induced osteogenic differentiation in the MSCs.

A Novel Congestion Detection Scheme in TCP Over OBS Networks

KAUST Repository

Shihada, Basem; Ho, Pin-Han; Zhang, Qiong

2009-01-01

This paper introduces a novel congestion detection scheme for high-bandwidth TCP flows over optical burst switching (OBS) networks, called statistical additive increase multiplicative decrease (SAIMD). SAIMD maintains and analyzes a number

Release Kinetics and Antibacterial Efficacy of Microporous β-TCP Coatings

Directory of Open Access Journals (Sweden)

Michael Seidenstuecker

2013-01-01

Full Text Available Purpose. The aim of this study was to impregnate microporous β-TCP scaffolds with different antibiotic solutions and to determine their release behavior. Materials and Methods. We impregnated a β-TCP scaffold with antibiotics by using three methods: drop, dip, and stream coating with 120 mg/mL of antibiotic solution. After drying for 72 h at 37°C, 2 mL of distilled water was added to the antibiotic-coated plugs and incubated at 37°C. After defined time points (1, 2, 3, 6, 9, and 14 days, the liquid was completely replaced. The extracted liquid was analyzed by capillary zone electrophoresis and the Kirby Bauer disc diffusion test. For statistical analysis, we calculated a mean and standard deviation and carried out an analysis of variance using ANOVA. Results. The VAN and CLI release from the β-TCP scaffolds was rapid, occurring within 24 h with 89 ± 0.8% VAN and 90.4 ± 1.5% CLI regardless of the type of insulation. After six days, the VAN and CLI were completely released. All samples taken at later time points had a VAN or CLI concentration below the detection limit of 4 µg/mL. The released amounts of VAN and CLI within the first three days revealed antimicrobial activity.

The therapeutic effect on bone mineral formation from biomimetic zinc containing tricalcium phosphate (ZnTCP in zinc-deficient osteoporotic mice.

Directory of Open Access Journals (Sweden)

Joshua Chou

Full Text Available The aim of this study was to evaluate the therapeutic efficacy of biomimetic zinc-containing tricalcium phosphate (ZnTCP produced by hydrothermally converting calcium carbonate exoskeletons from foraminifera, in the treatment of osteoporotic mice. X-Ray powder diffraction showed crystallographic structures matching JCPDS profile for tricalcium phosphate. Mass spectroscopy used to calculate total composition amount showed similar amount of calcium (5×10(4 µg/g and phosphate (4×10(4 ppm after conversion and the presence of zinc (5.18×10(3 µg/g. In vitro zinc release showed no release in PBS buffer and <1% zinc release in 7 days. In vivo evaluation was done in ovariectomized mice by implanting the ZnTCP samples in the soft tissues near the right femur bone for four weeks. Thirty ddY mice (5 weeks old, average weight of 21 g were divided into six experimental groups (normal, sham, OVX, β-TCP, ZnTCP and direct injection of zinc. CT images were taken every two weeks where the bone mineral density (BMD and bone mineral content (BMC were calculated by software based on CT images. The ZnTCP group exhibits cortical and cancellous bone growth of 45% and 20% respectively. While sham, OVX and β-TCP suffered from bone loss. A correlation was made between the significant body weight increase in ZnTCP with the significant increase in plasma zinc level compared with OVX. The presented results indicate that biomimetic ZnTCP were effective in preventing and treating bone loss in osteoporotic mice model.

TCP Transcription Factors at the Interface between Environmental Challenges and the Plant's Growth Responses.

Science.gov (United States)

Danisman, Selahattin

2016-01-01

Plants are sessile and as such their reactions to environmental challenges differ from those of mobile organisms. Many adaptions involve growth responses and hence, growth regulation is one of the most crucial biological processes for plant survival and fitness. The plant-specific TEOSINTE BRANCHED 1, CYCLOIDEA, PCF1 (TCP) transcription factor family is involved in plant development from cradle to grave, i.e., from seed germination throughout vegetative development until the formation of flowers and fruits. TCP transcription factors have an evolutionary conserved role as regulators in a variety of plant species, including orchids, tomatoes, peas, poplar, cotton, rice and the model plant Arabidopsis. Early TCP research focused on the regulatory functions of TCPs in the development of diverse organs via the cell cycle. Later research uncovered that TCP transcription factors are not static developmental regulators but crucial growth regulators that translate diverse endogenous and environmental signals into growth responses best fitted to ensure plant fitness and health. I will recapitulate the research on TCPs in this review focusing on two topics: the discovery of TCPs and the elucidation of their evolutionarily conserved roles across the plant kingdom, and the variety of signals, both endogenous (circadian clock, plant hormones) and environmental (pathogens, light, nutrients), TCPs respond to in the course of their developmental roles.

TRAP: A Three-Way Handshake Server for TCP Connection Establishment

Directory of Open Access Journals (Sweden)

Fu-Hau Hsu

2016-11-01

Full Text Available Distributed denial of service attacks have become more and more frequent nowadays. In 2013, a massive distributed denial of service (DDoS attack was launched against Spamhaus causing the service to shut down. In this paper, we present a three-way handshaking server for Transmission Control Protocol (TCP connection redirection utilizing TCP header options. When a legitimate client attempted to connect to a server undergoing an SYN-flood DDoS attack, it will try to initiate a three-way handshake. After it has successfully established a connection, the server will reply with a reset (RST packet, in which a new server address and a secret is embedded. The client can, thus, connect to the new server that only accepts SYN packets with the corrected secret using the supplied secret.

TCP/IP Interface for the Satellite Orbit Analysis Program (SOAP)

Science.gov (United States)

Carnright, Robert; Stodden, David; Coggi, John

2009-01-01

The Transmission Control Protocol/ Internet protocol (TCP/IP) interface for the Satellite Orbit Analysis Program (SOAP) provides the means for the software to establish real-time interfaces with other software. Such interfaces can operate between two programs, either on the same computer or on different computers joined by a network. The SOAP TCP/IP module employs a client/server interface where SOAP is the server and other applications can be clients. Real-time interfaces between software offer a number of advantages over embedding all of the common functionality within a single program. One advantage is that they allow each program to divide the computation labor between processors or computers running the separate applications. Secondly, each program can be allowed to provide its own expertise domain with other programs able to use this expertise.

Effects of BMP-2 and dexamethasone on osteogenic differentiation of rat dental follicle progenitor cells seeded on three-dimensional beta-TCP

Energy Technology Data Exchange (ETDEWEB)

Xu Lulu; Jin Zuolin; Duan Yinzhong [Department of Orthodontics, Stomatological College, Fourth Military Medical University, Xi' an 710032 (China); Liu Hongchen; Wang Dongsheng; E Lingling [Department of Stomatology, China PLA General Hospital, Beijing 100853 (China); Xu Lin, E-mail: jinzuolin88@yahoo.com.c, E-mail: duanyinzhong@yahoo.com.c [Department of Stomatology, the First Hospital of PLA, Lanzhou 730000 (China)

2009-12-15

The aim of this study was to investigate the effects of BMP-2 and dexamethasone (Dex) on osteogenic differentiation of rat dental follicle progenitor cells (RDFCs) seeded on three-dimensional beta-TCP. The alkaline phosphatase (ALP), the calcium and phosphonium, the osteocalcin in media of the third passage RDFCs on biomaterial beta-TCP after 1-3, 3-7, 7-14 days of culture were examined respectively. The growth of cells on the scaffolds was observed by scanning electron microscope (SEM) after 3, 7 days of culture and by implanting in the backs of severe combined immunodeficient (SCID) mice for bone regeneration. The third passage RDFCs could be seen adhered, extended and proliferated on the beta-TCP by scanning electron microscopy. The ALP activity, the calcium and phosphoniums and the osteocalcin content of dexamethasone (10{sup -8} M) or/and BMP-2 (100 ng ml{sup -1}) were significantly higher than their existence in the control group. They were the significantly highest among four groups after joint application of BMP-2 and dexamethasone. After 8 weeks of implantation, the percentage of the new bones formed area in the RDFCs+beta-TCP+BMP-2+Dex group was significantly higher than that in the RDFCs+beta-TCP+BMP-2 group. In contrast, beta-TCP, RDFCs+beta-TCP+Dex and control constructs lacked new bone formation by histological staining and histomorphometric analysis. The BMP-2+Dex could significantly promote osteogenic differentiation of RDFCs on beta-TCP. beta-TCP supported fast cellular adhesion, proliferation and differentiation of RDFCs. The feasibility of its application in periodontal tissue engineering was also proved.

Adaptive optimization for active queue management supporting TCP flows

NARCIS (Netherlands)

Baldi, S.; Kosmatopoulos, Elias B.; Pitsillides, Andreas; Lestas, Marios; Ioannou, Petros A.; Wan, Y.; Chiu, George; Johnson, Katie; Abramovitch, Danny

2016-01-01

An adaptive decentralized strategy for active queue management of TCP flows over communication networks is presented. The proposed strategy solves locally, at each link, an optimal control problem, minimizing a cost composed of residual capacity and buffer queue size. The solution of the optimal

Bone Regeneration of Rat Tibial Defect by Zinc-Tricalcium Phosphate (Zn-TCP Synthesized from Porous Foraminifera Carbonate Macrospheres

Directory of Open Access Journals (Sweden)

Joshua Chou

2013-12-01

Full Text Available Foraminifera carbonate exoskeleton was hydrothermally converted to biocompatible and biodegradable zinc-tricalcium phosphate (Zn-TCP as an alternative biomimetic material for bone fracture repair. Zn-TCP samples implanted in a rat tibial defect model for eight weeks were compared with unfilled defect and beta-tricalcium phosphate showing accelerated bone regeneration compared with the control groups, with statistically significant bone mineral density and bone mineral content growth. CT images of the defect showed restoration of cancellous bone in Zn-TCP and only minimal growth in control group. Histological slices reveal bone in-growth within the pores and porous chamber of the material detailing good bone-material integration with the presence of blood vessels. These results exhibit the future potential of biomimetic Zn-TCP as bone grafts for bone fracture repair.

Efficacy of rhBMP-2 Loaded PCL/β-TCP/bdECM Scaffold Fabricated by 3D Printing Technology on Bone Regeneration

Directory of Open Access Journals (Sweden)

Eun-Bin Bae

2018-01-01

Full Text Available This study was undertaken to evaluate the effect of 3D printed polycaprolactone (PCL/β-tricalcium phosphate (β-TCP scaffold containing bone demineralized and decellularized extracellular matrix (bdECM and human recombinant bone morphogenetic protein-2 (rhBMP-2 on bone regeneration. Scaffolds were divided into PCL/β-TCP, PCL/β-TCP/bdECM, and PCL/β-TCP/bdECM/BMP groups. In vitro release kinetics of rhBMP-2 were determined with respect to cell proliferation and osteogenic differentiation. These three reconstructive materials were implanted into 8 mm diameter calvarial bone defect in male Sprague-Dawley rats. Animals were sacrificed four weeks after implantation for micro-CT, histologic, and histomorphometric analyses. The findings obtained were used to calculate new bone volumes (mm3 and new bone areas (%. Excellent cell bioactivity was observed in the PCL/β-TCP/bdECM and PCL/β-TCP/bdECM/BMP groups, and new bone volume and area were significantly higher in the PCL/β-TCP/bdECM/BMP group than in the other groups (p<.05. Within the limitations of this study, bdECM printed PCL/β-TCP scaffolds can reproduce microenvironment for cells and promote adhering and proliferating the cells onto scaffolds. Furthermore, in the rat calvarial defect model, the scaffold which printed rhBMP-2 loaded bdECM stably carries rhBMP-2 and enhances bone regeneration confirming the possibility of bdECM as rhBMP-2 carrier.

Satellite communication on pipeline supervision using TCP-IP Protocol; Comunicacao via satelite na supervisao de dutos usando o protocolo TCP-IP

Energy Technology Data Exchange (ETDEWEB)

Silva, Agliberto Pessoa da [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Brunette, Sergio Henrique de Moraes

2003-07-01

Bit transparent type or X-25 protocols have been used in VSAT satellite communication by PETROBRAS pipeline Supervisory Control and Data Acquisition System (SCADA) as access protocol. Both solutions have inconveniences. By the first one, difficulties exist for analysis and diagnosis of connection flaws, and therefore, for a ready identification by the system management stations of abnormality location. On the other hand, the usage of the X-25 brings an additional over-head in the communication since this is not an available option in most of the equipment that compose the SCADA. The access to VSAT through Ethernet, in the opposite, makes available all networks management tools of the TCP/IP platform and it allows a direct connection to the field devices, since the main models of the several makers of Programmable Controllers and Remote Terminal Units have Ethernet port. An additional earnings is the possibility of standardization that this solution allows. This paper describes a series of communication tests between two Programmable Controllers communicating through the satellite, using a protocol over Ethernet/TCP/IP. (author)

Predictive functional control for active queue management in congested TCP/IP networks.

Science.gov (United States)

Bigdeli, N; Haeri, M

2009-01-01

Predictive functional control (PFC) as a new active queue management (AQM) method in dynamic TCP networks supporting explicit congestion notification (ECN) is proposed. The ability of the controller in handling system delay along with its simplicity and low computational load makes PFC a privileged AQM method in the high speed networks. Besides, considering the disturbance term (which represents model/process mismatches, external disturbances, and existing noise) in the control formulation adds some level of robustness into the PFC-AQM controller. This is an important and desired property in the control of dynamically-varying computer networks. In this paper, the controller is designed based on a small signal linearized fluid-flow model of the TCP/AQM networks. Then, closed-loop transfer function representation of the system is derived to analyze the robustness with respect to the network and controller parameters. The analytical as well as the packet-level ns-2 simulation results show the out-performance of the developed controller for both queue regulation and resource utilization. Fast response, low queue fluctuations (and consequently low delay jitter), high link utilization, good disturbance rejection, scalability, and low packet marking probability are other features of the developed method with respect to other well-known AQM methods such as RED, PI, and REM which are also simulated for comparison.

Versatile Markovian models for networks with asymmetric TCP sources

NARCIS (Netherlands)

van Foreest, N.D.; Haverkort, Boudewijn R.H.M.; Mandjes, M.R.H.; Scheinhardt, Willem R.W.

2004-01-01

In this paper we use Stochastic Petri Nets (SPNs) to study the interaction of multiple TCP sources that share one or two buffers, thereby considerably extending earlier work. We first consider two sources sharing a buffer and investigate the consequences of two popular assumptions for the loss

Preparation and in vitro evaluation of nanostructured TiO2/TCP composite coating by plasma electrolytic oxidation

International Nuclear Information System (INIS)

Hu, Hongjie; Liu, Xuanyong; Ding, Chuanxian

2010-01-01

Porous and nanostructured TiO 2 /tricalcium phosphate (TCP) composite coating on titanium substrate was prepared by plasma electrolytic oxidation (PEO). The microstructure and phase composition of the coating were characterized using scanning electron microscopy and X-ray diffraction. Its bioactivity was evaluated by simulated body fluid (SBF) immersion tests. MG63 cells were cultured on the surface of the coating to investigate its cytocompatibility. Potentiodynamic polarization tests were applied to measure its corrosion resistance. The results revealed that rough and hydrophilic TiO 2 /TCP composite coating with pores of several micrometers and grains of 50-200 nm was prepared by one-step PEO treatment. The TiO 2 /TCP composite coating showed good apatite-forming ability in SBF, and the TCP phase in the coating played an important role in inducing apatite formation. MG63 cells could adhere and proliferate on the surface of the coating, indicating its good cytocompatibility. The composite coating also exhibited good corrosion resistance in 0.9% NaCl solution.

Optimising TCP for cloud-based mobile networks

DEFF Research Database (Denmark)

Artuso, Matteo; Christiansen, Henrik Lehrmann

2016-01-01

Cloud-based mobile networks are foreseen to be a technological enabler for the next generation of mobile networks. Their design requires substantial research as they pose unique challenges, especially from the point of view of additional delays in the fronthaul network. Commonly used network...... implementations of 3 popular operating systems are investigated in our network model. The results on the most influential parameters are used to design an optimized TCP for cloud-based mobile networks....

A new iron calcium phosphate material to improve the osteoconductive properties of a biodegradable ceramic: a study in rabbit calvaria.

Science.gov (United States)

Manchón, Angel; Hamdan Alkhraisat, Mohammad; Rueda-Rodriguez, Carmen; Prados-Frutos, Juan Carlos; Torres, Jesús; Lucas-Aparicio, Julia; Ewald, Andrea; Gbureck, Uwe; López-Cabarcos, Enrique

2015-10-20

β-tricalcium phosphate (β-TCP) is an osteoconductive and biodegradable material used in bone regeneration procedures, while iron has been suggested as a tool to improve the biological performance of calcium phosphate-based materials. However, the mechanisms of interaction between these materials and human cells are not fully understood. In order to clarify this relationship, we have studied the iron role in β-TCP ceramics. Iron-containing β-TCPs were prepared by replacing CaCO3 with C6H5FeO7 at different molar ratios. X-ray diffraction analysis indicated the occurrence of β-TCP as the sole phase in the pure β-TCP and iron-containing ceramics. The incorporation of iron ions in the β-TCP lattice decreased the specific surface area as the pore size was shifted toward meso- and/or macropores. Furthermore, the human osteoblastlike cell line MG-63 was cultured onto the ceramics to determine cell proliferation and viability, and it was observed that the iron-β-TCP ceramics have better cytocompatibility than pure β-TCP. Finally, in vivo assays were performed using rabbit calvaria as a bone model. The scaffolds were implanted for 8 and 12 weeks in the defects created in the skullcap with pure β-TCP as the control. The in vivo behavior, in terms of new bone formed, degradation, and residual graft material were investigated using sequential histological evaluations and histomorphometric analysis. The in vivo implantation of the ceramics showed enhanced bone tissue formation and scaffold degradation for iron-β-TCPs. Thus, iron appears to be a useful tool to enhance the osteoconductive properties of calcium phosphate ceramics.

MULTIMEDIA DATA TRANSMISSION THROUGH TCP/IP USING HASH BASED FEC WITH AUTO-XOR SCHEME

OpenAIRE

R. Shalin; D. Kesavaraja

2012-01-01

The most preferred mode for communication of multimedia data is through the TCP/IP protocol. But on the other hand the TCP/IP protocol produces huge packet loss unavoidable due to network traffic and congestion. In order to provide a efficient communication it is necessary to recover the loss of packets. The proposed scheme implements Hash based FEC with auto XOR scheme for this purpose. The scheme is implemented through Forward error correction, MD5 and XOR for providing efficient transmissi...

YottaYotta announces new world record set for TCP disk-to-disk bulk transfer

CERN Document Server

2002-01-01

The Yottabyte NetStorage(TM) Company, today announced a new world record for TCP disk-to-disk data transfer using the company's NetStorager(R) System. The record-breaking demonstration transferred 5 terabytes of data between Chicago, Il. to Vancouver, BC and Ottawa, ON, at a sustained average throughput of 11.1 gigabits per second. Peak throughput exceeded 11.6 gigabits per second, more than 15-times faster than previous records for TCP transfer from disk-to-disk (1 page).

ejIP: A TCP/IP Stack for Embedded Java

DEFF Research Database (Denmark)

Schoeberl, Martin

2011-01-01

present the design and implementation of a network stack written entirely in Java. This implementation serves as an example how to implement system functions in a safe language and gives evidence that Java can be used for operating system related functionality. The described TCP/IP stack ejIP has already...

Ohio Marketing Management and Research. Technical Competency Profile (TCP).

Science.gov (United States)

Ray, Gayl M.; Wilson, Nick; Mangini, Rick

This document provides a framework for a broad-based secondary and postsecondary curriculum to prepare students for employment in marketing management and research (MMR). The first part of the technical competency profile (TCP) contains the following items: an explanation of the purpose and scope of Ohio's TCPs; college tech prep program…

Proliferation and osteogenic differentiation of human periodontal ligament cells on akermanite and β-TCP bioceramics

Directory of Open Access Journals (Sweden)

L Xia

2011-07-01

Full Text Available The purpose of this study was to investigate the effects of akermanite as compared to β-TCP on attachment, proliferation, and osteogenic differentiation of human periodontal ligament cells (hPDLCs. Scanning electron microscopy (SEM and actin filament labeling were used to reveal attachment and growth of hPDLCs seeded on β-TCP and akermanite ceramic. Cell proliferation was tested by lactic acid production and MTT analysis, while osteogenic differentiation was assayed by alkaline phosphatase (ALP expression and real-time polymerase chain reaction (PCR analysis on markers of osteopontin (OPN, dentin matrix acidic phosphoprotein-1 (DMP-1, and osteocalcin (OCN, and further detected by enzyme-linked immunosorbent analysis (ELISA analysis for OCN expression. Besides, the ions released from akermanite and their effect on hPDLCs was also measured by inductively coupled plasma atomic emission spectroscopy (ICP-AES, MTT analysis, ALP expression and real-time PCR analysis. hPDLCs attached well on both ceramics, but showed better spreading on akermanite. hPDLCs proliferated more rapidly on akermanite than β-TCP. Importantly, osteogenic differentiation of hPDLCs was enhanced on akermanite compared to β-TCP. Besides, Ca, Mg and Si ions were released from akermanite, while only Ca ions were released from β-TCP. Moreover, more pronounced proliferation and higher osteogenic gene expression for hPDLCs cultured with akermanite extract were detected as compared to cells cultured on akermanite. Therefore, akermanite ceramic showed an enhanced effect on proliferation and osteogenic differentiation of hPDLCs, which might be attributed to the release of ions containing Ca, Mg and Si from the material. It is suggested that akermanite ceramics may serve as a potential material for periodontal bone regeneration.

A robust fractional-order PID controller design based on active queue management for TCP network

Science.gov (United States)

Hamidian, Hamideh; Beheshti, Mohammad T. H.

2018-01-01

In this paper, a robust fractional-order controller is designed to control the congestion in transmission control protocol (TCP) networks with time-varying parameters. Fractional controllers can increase the stability and robustness. Regardless of advantages of fractional controllers, they are still not common in congestion control in TCP networks. The network parameters are time-varying, so the robust stability is important in congestion controller design. Therefore, we focused on the robust controller design. The fractional PID controller is developed based on active queue management (AQM). D-partition technique is used. The most important property of designed controller is the robustness to the time-varying parameters of the TCP network. The vertex quasi-polynomials of the closed-loop characteristic equation are obtained, and the stability boundaries are calculated for each vertex quasi-polynomial. The intersection of all stability regions is insensitive to network parameter variations, and results in robust stability of TCP/AQM system. NS-2 simulations show that the proposed algorithm provides a stable queue length. Moreover, simulations show smaller oscillations of the queue length and less packet drop probability for FPID compared to PI and PID controllers. We can conclude from NS-2 simulations that the average packet loss probability variations are negligible when the network parameters change.

Fabrication and evaluation of 3D β-TCP scaffold by novel direct-write assembly method

International Nuclear Information System (INIS)

Sa, Min Woo; Kim, Jong Young

2015-01-01

Various scaffold fabrication methods have been explored to enhance the cell interaction effects and mechanical properties of scaffolds in bone regeneration. Rapid prototyping (RP) for tissue engineering is a useful technology that may provide a potential scaffolding structure to regenerate, restore, and repair a damaged bone tissue or organ, that is, RP is a promising tissue engineering technique through a 3D scaffold fabrication by using a computer-aided design/computer-aided manufacturing system. In this study, 3D β-tricalcium phosphate (β-TCP) scaffolds were fabricated by a novel direct-write assembly method. The mechanical property of β-TCP scaffolds was analyzed by stress-strain curves by using a compression testing machine. Furthermore, an in vitro CCK-8 assay of osteosarcoma MG-63 cells showed the significant cell attachment and proliferation in the β-TCP scaffold.

Fabrication and evaluation of 3D β-TCP scaffold by novel direct-write assembly method

Energy Technology Data Exchange (ETDEWEB)

Sa, Min Woo; Kim, Jong Young [Andong National University, Andong (Korea, Republic of)

2015-11-15

Various scaffold fabrication methods have been explored to enhance the cell interaction effects and mechanical properties of scaffolds in bone regeneration. Rapid prototyping (RP) for tissue engineering is a useful technology that may provide a potential scaffolding structure to regenerate, restore, and repair a damaged bone tissue or organ, that is, RP is a promising tissue engineering technique through a 3D scaffold fabrication by using a computer-aided design/computer-aided manufacturing system. In this study, 3D β-tricalcium phosphate (β-TCP) scaffolds were fabricated by a novel direct-write assembly method. The mechanical property of β-TCP scaffolds was analyzed by stress-strain curves by using a compression testing machine. Furthermore, an in vitro CCK-8 assay of osteosarcoma MG-63 cells showed the significant cell attachment and proliferation in the β-TCP scaffold.

αTCP ceramic doped with dicalcium silicate for bone regeneration applications prepared by powder metallurgy method: in vitro and in vivo studies.

Science.gov (United States)

Velasquez, Pablo; Luklinska, Zofia B; Meseguer-Olmo, Luis; Mate-Sanchez de Val, Jose E; Delgado-Ruiz, Rafael A; Calvo-Guirado, Jose L; Ramirez-Fernandez, Ma P; de Aza, Piedad N

2013-07-01

This study reports on the in vitro and in vivo behavior of α-tricalcium phosphate (αTCP) and also αTCP doped with either 1.5 or 3.0 wt % of dicalcium silicate (C2 S). The ceramics were successfully prepared by powder metallurgy method combined with homogenization and heat treatment procedures. All materials were composed of a single-phase, αTCP in the case of a pure material, or solid solution of C2 S in αTCP for the doped αTCP, which were stable at room temperature. The ceramics were tested for bioactivity in simulated body fluid, cell culture medium containing adult mesenchymal stem cells of human origin, and in animals. Analytical scanning electron microscopy combined with chemical elemental analysis was used and Fourier transform infrared and conventional histology methods. The in vivo behavior of the ceramics matched the in vitro results, independently of the C2 S content in αTCP. Carbonated hydroxyapatite (CHA) layer was formed on the surface and within the inner parts of the specimens in all cases. A fully mineralized new bone growing in direct contact with the implants was found under the in vivo conditions. The bioactivity and biocompatibility of the implants increased with the C2 S content in αTCP. The C2 S doped ceramics also favoured a phase transformation of αTCP into CHA, important for full implant integration during the natural bone healing processes. αTCP ceramic doped with 3.0 wt % C2 S showed the best bioactive in vitro and in vivo properties of all the compositions and hence could be of interest in specific applications for bone restorative purposes. Copyright © 2012 Wiley Periodicals, Inc.

Achieving High Performance With TCP Over 40 GbE on NUMA Architectures for CMS Data Acquisition

Energy Technology Data Exchange (ETDEWEB)

Bawej, Tomasz; et al.

2014-01-01

TCP and the socket abstraction have barely changed over the last two decades, but at the network layer there has been a giant leap from a few megabits to 100 gigabits in bandwidth. At the same time, CPU architectures have evolved into the multicore era and applications are expected to make full use of all available resources. Applications in the data acquisition domain based on the standard socket library running in a Non-Uniform Memory Access (NUMA) architecture are unable to reach full efficiency and scalability without the software being adequately aware about the IRQ (Interrupt Request), CPU and memory affinities. During the first long shutdown of LHC, the CMS DAQ system is going to be upgraded for operation from 2015 onwards and a new software component has been designed and developed in the CMS online framework for transferring data with sockets. This software attempts to wrap the low-level socket library to ease higher-level programming with an API based on an asynchronous event driven model similar to the DAT uDAPL API. It is an event-based application with NUMA optimizations, that allows for a high throughput of data across a large distributed system. This paper describes the architecture, the technologies involved and the performance measurements of the software in the context of the CMS distributed event building.

Procesamiento cerámico de β-TCP para la fabricación de piezas implantables

Directory of Open Access Journals (Sweden)

Franco, J.

2006-08-01

Full Text Available This work describes a method for obtaining large-scale productions of β-TCP by mass-precipitation from calcium and phosphate solutions. The setting of the synthesis conditions was made by studying operational parameters like the concentrations of the reagents, the speed of the mixing of the reagents, pH of precipitation and ageing of the precipitate. This synthesis procedure allows obtaining high purity β-TCP under ASTM F1088-87. Starting from synthesized β-TCP were made rods for implantation by die pressing, slip casting, gel casting and low pressure injection moulding. These rods were well characterized and implanted in Beagle dogs. Thin film histological results for 2, 7, and 14 months of implantation period, shown a good biocompatibility for the material and its resorbable behaviour.

El trabajo describe la puesta a punto de un método de obtención de grandes cantidades de fosfato tricálcico (β-TCP, por precipitación a partir de disoluciones de sales de calcio y de fosfatos. Para ello se estudia la influencia de los parámetros de operación tales como concentración de reactivos, velocidad de adición, pH de precipitación y tiempo de envejecimiento del precipitado. El procedimiento, que es escalable a nivel industrial, permite obtener β-TCP de elevada pureza, que cumple ASTM F1088-87. Con el material obtenido se procesan barras implantables por prensado, colado, gel-casting e inyección, que se caracterizan detalladamente, y posteriormente se implantan en la tibia de perros Beagle. El estudio histológico en lámina delgada de los implantes, tras períodos de implantación de 2, 7 y 14 meses, permite evaluar la excelente biocompatibilidad del material y su carácter reabsorbible.

Chest tcpO2 changes during constant-load treadmill walking tests in patients with claudication

International Nuclear Information System (INIS)

Ouedraogo, N; Leftheriotis, G; Abraham, P; Feuilloy, M; Mahe, G; Saumet, J-L

2011-01-01

Changes in chest transcutaneous-pO 2 at rest (ΔtcpO 2 ) mimic absolute changes in arterial-pO 2 during moderate exercise, although the absolute starting values may dramatically differ. We retrospectively studied 485 patients (group 1), prospectively studied 292 new patients (group 2) and estimated the intra-test and the test–retest reproducibility of ΔtcpO 2 during constant-load treadmill tests: 3.2 km h −1 , 10% grade, using the cross correlation technique. Patients were classified into groups according to their best fit to nine pre-defined mathematic models. Respectively, 71% and 76% of patients of groups 1 and 2 fitted with a model showing a ΔtcpO 2 increase during and a decrease following exercise. Another 18% and 12% of the patients of groups 1 and 2 respectively fitted with a model that showed an abrupt decrease at exercise onset, a slow increase during walking and an overshoot in the recovery period, referred here as a walking-induced transcutaneous hack (WITH) profile. The mean r max value for the cross-correlation analysis was 0.919 ± 0.091 and 0.800 ± 0.129 for intra-test and test–retest reproducibility. Most profiles show the expected ΔtcpO 2 exercise-induced increase. Future studies are needed to confirm and explain the WITH profiles that we found, and screen for potential-associated diseases

Development of PLGA-coated β-TCP scaffolds containing VEGF for bone tissue engineering.

Science.gov (United States)

Khojasteh, Arash; Fahimipour, Farahnaz; Eslaminejad, Mohamadreza Baghaban; Jafarian, Mohammad; Jahangir, Shahrbanoo; Bastami, Farshid; Tahriri, Mohammadreza; Karkhaneh, Akbar; Tayebi, Lobat

2016-12-01

Bone tissue engineering is sought to apply strategies for bone defects healing without limitations and short-comings of using either bone autografts or allografts and xenografts. The aim of this study was to fabricate a thin layer poly(lactic-co-glycolic) acid (PLGA) coated beta-tricalcium phosphate (β-TCP) scaffold with sustained release of vascular endothelial growth factor (VEGF). PLGA coating increased compressive strength of the β-TCP scaffolds significantly. For in vitro evaluations, canine mesenchymal stem cells (cMSCs) and canine endothelial progenitor cells (cEPCs) were isolated and characterized. Cell proliferation and attachment were demonstrated and the rate of cells proliferation on the VEGF released scaffold was significantly more than compared to the scaffolds with no VEGF loading. A significant increase in expression of COL1 and RUNX2 was indicated in the scaffolds loaded with VEGF and MSCs compared to the other groups. Consequently, PLGA coated β-TCP scaffold with sustained and localized release of VEGF showed favourable results for bone regeneration in vitro, and this scaffold has the potential to use as a drug delivery device in the future. Copyright © 2016. Published by Elsevier B.V.

Leo Satellite Communication through a LEO Constellation using TCP/IP Over ATM

Science.gov (United States)

Foore, Lawrence R.; Konangi, Vijay K.; Wallett, Thomas M.

1999-01-01

The simulated performance characteristics for communication between a terrestrial client and a Low Earth Orbit (LEO) satellite server are presented. The client and server nodes consist of a Transmission Control Protocol /Internet Protocol (TCP/IP) over ATM configuration. The ATM cells from the client or the server are transmitted to a gateway, packaged with some header information and transferred to a commercial LEO satellite constellation. These cells are then routed through the constellation to a gateway on the globe that allows the client/server communication to take place. Unspecified Bit Rate (UBR) is specified as the quality of service (QoS). Various data rates are considered.

Rapid restoration of methanogenesis in an acidified UASB reactor treating 2,4,6-trichlorophenol (TCP).

Science.gov (United States)

Díaz-Báez, María Consuelo; Valderrama-Rincon, Juan Daniel

2017-02-15

Anaerobic bioreactors are often used for removal of xenobiotic and highly toxic pollutants from wastewater. Most of the time, the pollutant is so toxic that the stability of the reactor becomes compromised. It is well known that methanogens are one of the most sensitive organisms in the anaerobic consortia and hence the stability of the reactors is highly dependant on methanogenesis. Unfortunately few studies have focused on recovering the methanogenic activity once it has been inhibited by highly toxic pollutants. Here we establish a quick recovery strategy for neutralization of an acidified UASB reactor after failure by intoxication with an excess of TCP in the influent. Once the reactor returned to pH values compatible with methanogenesis, biogas production was re-started after one day and the system was re-acclimated to TCP. Successful removal of TCP from synthetic wastewater was shown for concentrations up to 70mg/L after restoration. Copyright © 2016 Elsevier B.V. All rights reserved.

FAST TCP over optical burst switched networks: Modeling and stability analysis

KAUST Repository

Shihada, Basem; El-Ferik, Sami; Ho, Pin-Han

2013-01-01

congestion-control mechanism in bufferless Optical Burst Switched Networks (OBS). The paper first shows that random burst contentions are essential to stabilize the network, but cause throughput degradation in FAST TCP flows when a burst with all the packets

Characterization of General TCP Traffic under a Large Number of Flows Regime

National Research Council Canada - National Science Library

Tinnakornsrisuphap, Peerapol; La, Richard J; Makowski, Armand M

2002-01-01

.... Accurate traffic modeling of a large number of short-lived TCP flows is extremely difficult due to the interaction between session, transport, and network layers, and the explosion of the size...

Construction of a nuclear data server using TCP/IP

Energy Technology Data Exchange (ETDEWEB)

Kawano, Toshihiko; Sakai, Osamu [Kyushu Univ., Fukuoka (Japan)

1997-03-01

We construct a nuclear data server which provides data in the evaluated nuclear data library through the network by means of TCP/IP. The client is not necessarily a user but a computer program. Two examples with a prototype server program are demonstrated, the first is data transfer from the server to a user, and the second is to a computer program. (author)

Electrospun Gelatin/β-TCP Composite Nanofibers Enhance Osteogenic Differentiation of BMSCs and In Vivo Bone Formation by Activating Ca2+-Sensing Receptor Signaling

Directory of Open Access Journals (Sweden)

Xuehui Zhang

2015-01-01

Full Text Available Calcium phosphate- (CaP- based composite scaffolds have been used extensively for the bone regeneration in bone tissue engineering. Previously, we developed a biomimetic composite nanofibrous membrane of gelatin/β-tricalcium phosphate (TCP and confirmed their biological activity in vitro and bone regeneration in vivo. However, how these composite nanofibers promote the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs is unknown. Here, gelatin/β-TCP composite nanofibers were fabricated by incorporating 20 wt% β-TCP nanoparticles into electrospun gelatin nanofibers. Electron microscopy showed that the composite β-TCP nanofibers had a nonwoven structure with a porous network and a rough surface. Spectral analyses confirmed the presence and chemical stability of the β-TCP and gelatin components. Compared with pure gelatin nanofibers, gelatin/β-TCP composite nanofibers caused increased cell attachment, proliferation, alkaline phosphatase activity, and osteogenic gene expression in rat BMSCs. Interestingly, the expression level of the calcium-sensing receptor (CaSR was significantly higher on the composite nanofibrous scaffolds than on pure gelatin. For rat calvarial critical sized defects, more extensive osteogenesis and neovascularization occurred in the composite scaffolds group compared with the gelatin group. Thus, gelatin/β-TCP composite scaffolds promote osteogenic differentiation of BMSCs in vitro and bone regeneration in vivo by activating Ca2+-sensing receptor signaling.

MULTIMEDIA DATA TRANSMISSION THROUGH TCP/IP USING HASH BASED FEC WITH AUTO-XOR SCHEME

Directory of Open Access Journals (Sweden)

R. Shalin

2012-09-01

Full Text Available The most preferred mode for communication of multimedia data is through the TCP/IP protocol. But on the other hand the TCP/IP protocol produces huge packet loss unavoidable due to network traffic and congestion. In order to provide a efficient communication it is necessary to recover the loss of packets. The proposed scheme implements Hash based FEC with auto XOR scheme for this purpose. The scheme is implemented through Forward error correction, MD5 and XOR for providing efficient transmission of multimedia data. The proposed scheme provides transmission high accuracy, throughput and low latency and loss.

Microfibrous {beta}-TCP/collagen scaffolds mimic woven bone in structure and composition

Energy Technology Data Exchange (ETDEWEB)

Zhang Shen; Zhang Xin; Cai Qing; Yang Xiaoping [Key Laboratory of Beijing City on Preparation and Processing of Novel Polymer Materials, College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029 (China); Wang Bo; Deng Xuliang, E-mail: yangxp@mail.buct.edu.c [Department of VIP Dental Service, School and Hospital of Stomatology, Peking University, Beijing 100081 (China)

2010-12-15

Woven bone, as the initial form of bone tissue, is always found in developing and repairing bone. It is thought of as a temporary scaffold for the deposition of osteogenic cells and the laying down of lamellar bone. Thus, we hypothesize that a matrix which resembles the architecture and components of woven bone can provide an osteoblastic microenvironment for bone cell growth and new bone formation. In this study, woven-bone-like beta-tricalcium phosphate ({beta}-TCP)/collagen scaffolds were fabricated by sol-gel electrospinning and impregnating methods. Optimization studies on sol-gel synthesis and electrospinning process were conducted respectively to prepare pure {beta}-TCP fibers with dimensions close to mineralized collagen fibrils in woven bone. The collagen-coating layer prepared by impregnation had an adhesive role that held the {beta}-TCP fibers together, and resulted in rapid degradation and matrix mineralization in in vitro tests. MG63 osteoblast-like cells seeded on the resultant scaffolds showed three-dimensional (3D) morphologies, and merged into multicellular layers after 7 days culture. Cytotoxicity test further revealed that extracts from the resultant scaffolds could promote the proliferation of MG63 cells. Therefore, the woven-bone-like matrix that we constructed favored the attachment and proliferation of MG63 cells in three dimensions. It has great potential ability to shorten the time of formation of new bone.

Microfibrous β-TCP/collagen scaffolds mimic woven bone in structure and composition

International Nuclear Information System (INIS)

Zhang Shen; Zhang Xin; Cai Qing; Yang Xiaoping; Wang Bo; Deng Xuliang

2010-01-01

Woven bone, as the initial form of bone tissue, is always found in developing and repairing bone. It is thought of as a temporary scaffold for the deposition of osteogenic cells and the laying down of lamellar bone. Thus, we hypothesize that a matrix which resembles the architecture and components of woven bone can provide an osteoblastic microenvironment for bone cell growth and new bone formation. In this study, woven-bone-like beta-tricalcium phosphate (β-TCP)/collagen scaffolds were fabricated by sol-gel electrospinning and impregnating methods. Optimization studies on sol-gel synthesis and electrospinning process were conducted respectively to prepare pure β-TCP fibers with dimensions close to mineralized collagen fibrils in woven bone. The collagen-coating layer prepared by impregnation had an adhesive role that held the β-TCP fibers together, and resulted in rapid degradation and matrix mineralization in in vitro tests. MG63 osteoblast-like cells seeded on the resultant scaffolds showed three-dimensional (3D) morphologies, and merged into multicellular layers after 7 days culture. Cytotoxicity test further revealed that extracts from the resultant scaffolds could promote the proliferation of MG63 cells. Therefore, the woven-bone-like matrix that we constructed favored the attachment and proliferation of MG63 cells in three dimensions. It has great potential ability to shorten the time of formation of new bone.

A review on transport layer protocol performance for delivering video on an adhoc network

Science.gov (United States)

Suherman; Suwendri; Al-Akaidi, Marwan

2017-09-01

The transport layer protocol is responsible for the end to end data transmission. Transmission control protocol (TCP) provides a reliable connection and user datagram protocol (UDP) offers fast but unguaranteed data transfer. Meanwhile, the 802.11 (wireless fidelity/WiFi) networks have been widely used as internet hotspots. This paper evaluates TCP, TCP variants and UDP performances for video transmission on an adhoc network. The transport protocol - medium access cross-layer is proposed by prioritizing TCP acknowledgement to reduce delay. The NS-2 evaluations show that the average delays increase linearly for all the evaluated protocols and the average packet losses grow logarithmically. UDP produces the lowest transmission delay; 5.4% and 5.8% lower than TCP and TCP variant, but experiences the highest packet loss. Both TCP and TCP Vegas maintain packet loss as low as possible. The proposed cross-layer successfully decreases TCP and TCP Vegas delay about 0.12 % and 0.15%, although losses remain similar.

Analysis of functional redundancies within the Arabidopsis TCP transcription factor family

NARCIS (Netherlands)

Danisman, S.; Dijk, van A.D.J.; Bimbo, A.; Wal, van der F.; Hennig, L.; Folter, de S.; Angenent, G.C.; Immink, R.G.H.

2013-01-01

Analyses of the functions of TEOSINTE-LIKE1, CYCLOIDEA, and ROLIFERATING CELL FACTOR1 (TCP) transcription factors have been hampered by functional redundancy between its individual members. In general, putative functionally redundant genes are predicted based on sequence similarity and confirmed by

Microstructure, mechanical property and corrosion behavior of interpenetrating (HA + β-TCP)/MgCa composite fabricated by suction casting

International Nuclear Information System (INIS)

Wang, X.; Dong, L.H.; Li, J.T.; Li, X.L.; Ma, X.L.; Zheng, Y.F.

2013-01-01

The novel interpenetrating (HA + β-TCP)/MgCa composites were fabricated by infiltrating MgCa alloy into porous HA + β-TCP using suction casting technique. The microstructure, mechanical properties and corrosion behaviors of the composites have been evaluated by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical testing, electrochemical and immersion tests. It was shown that the composites had compact structure and the interfacial bonding between MgCa alloy and HA + β-TCP scaffolds was very well. The ultimate compressive strength of the composites was about 500–1000 fold higher than that of the original porous scaffolds, and it still retained quarter-half of the strength of the bulk MgCa alloy. The electrochemical and immersion tests indicated that the corrosion resistance of the composites was better than that of the MgCa matrix alloy, and the corrosion products of the composite surface were mainly Mg(OH) 2 , HA and Ca 3 (PO 4 ) 2 . Meanwhile, the mechanical and corrosive properties of the (HA + β-TCP)/MgCa composites were adjustable by the choice of HA content. - Highlights: • The composites were fabricated by infiltrating MgCa alloy into porous HA + β-TCP. • The microstructure, mechanical and corrosion properties were investigated. • It showed composites had compact structures and good interfacial bonding. • The mechanical and corrosive properties can be adjustable by the HA content. • The corrosion mechanism of the composite has been explained

A Network Steganography Lab on Detecting TCP/IP Covert Channels

Science.gov (United States)

Zseby, Tanja; Vázquez, Félix Iglesias; Bernhardt, Valentin; Frkat, Davor; Annessi, Robert

2016-01-01

This paper presents a network security laboratory to teach data analysis for detecting TCP/IP covert channels. The laboratory is mainly designed for students of electrical engineering, but is open to students of other technical disciplines with similar background. Covert channels provide a method for leaking data from protected systems, which is a…

Influence of the addition of β-TCP on the morphology, thermal properties and cell viability of poly (lactic acid) fibers obtained by electrospinning

Energy Technology Data Exchange (ETDEWEB)

Siqueira, L. [Laboratory of Bioceramics, Institute of Science and Technology, UNIFESP, São José dos Campos, SP (Brazil); Passador, F.R. [Laboratory of Polymer Processing, Institute of Science and Technology, UNIFESP, São José dos Campos, SP (Brazil); Costa, M.M. [Laboratory of Biomedical Nanotechnology, Development Research Institute IP& D, UNIVAP, São José dos Campos, SP (Brazil); Lobo, A.O., E-mail: aolobo@pq.cnpq.br [Laboratory of Biomedical Nanotechnology, Development Research Institute IP& D, UNIVAP, São José dos Campos, SP (Brazil); Sousa, E., E-mail: eliandra.sousa@unifesp.br [Laboratory of Bioceramics, Institute of Science and Technology, UNIFESP, São José dos Campos, SP (Brazil)

2015-07-01

Electrospinning is a simple and low-cost way to fabricate fibers. Among the various polymers used in electrospinning process, the poly (lactic acid) (PLA) stands out due to its excellent biodegradability and biocompatibility. Calcium phosphate ceramics has been recognized as an attractive biomaterial because their chemical composition is similar to the mineral component of the hard tissue in the body. Furthermore, they are bioactive and osteoinductive and some are even quite biodegradable. The beta-tricalcium phosphate (β-TCP) particles were synthesized by solid state reaction. Different contents of β-TCP particles were incorporated in polymer matrices to form fibers of PLA/β-TCP composites by electrospinning aiming a possible application as a scaffold for tissue engineering. The fibers were characterized by scanning electron microscopy (SEM), infrared (FTIR), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The average diameter of the fibers varied in the range of 260–519.6 ± 50 nm. The presence of β-TCP particles promoted changes on thermal properties of the fibers. The composite with 8 wt-% of β-TCP showed a low degree of crystallinity and can be used for application in tissue engineering. The cell viability was analyzed by reduction of the methyl tetrazolium salt by the pyruvate dehydrogenase enzymatic complex present in the matrix of mitochondria (MTT test). All PLA fiber groups, with different contents of β-TCP, showed cytocompatibility ability with non-cytotoxicity effect and bioactive properties using SBF assay. - Highlights: • PLA fibers with β-TCP particles incorporated were obtained by electrospinning aiming an application in tissue engineering.. • The average diameter of the fibers varied in the range of 260–519.6 ± 50 nm. • The composite with 8 wt.% of β-TCP showed a low degree of crystallinity and can be used for application in tissue engineering. • All PLA fibers groups, with different contents of

Fabrication of 3D porous SF/β-TCP hybrid scaffolds for bone tissue reconstruction.

Science.gov (United States)

Park, Hyun Jung; Min, Kyung Dan; Lee, Min Chae; Kim, Soo Hyeon; Lee, Ok Joo; Ju, Hyung Woo; Moon, Bo Mi; Lee, Jung Min; Park, Ye Ri; Kim, Dong Wook; Jeong, Ju Yeon; Park, Chan Hum

2016-07-01

Bio-ceramic is a biomaterial actively studied in the field of bone tissue engineering. But, only certain ceramic materials can resolve the corrosion problem and possess the biological affinity of conventional metal biomaterials. Therefore, the recent development of composites of hybrid composites and polymers has been widely studied. In this study, we aimed to select the best scaffold of silk fibroin and β-TCP hybrid for bone tissue engineering. We fabricated three groups of scaffold such as SF (silk fibroin scaffold), GS (silk fibroin/small granule size of β-TCP scaffold) and GM (silk fibroin/medium granule size of β-TCP scaffold), and we compared the characteristics of each group. During characterization of the scaffold, we used scanning electron microscopy (SEM) and a Fourier transform infrared spectroscopy (FTIR) for structural analysis. We compared the physiological properties of the scaffold regarding the swelling ratio, water uptake and porosity. To evaluate the mechanical properties, we examined the compressive strength of the scaffold. During in vitro testing, we evaluated cell attachment and cell proliferation (CCK-8). Finally, we confirmed in vivo new bone regeneration from the implanted scaffolds using histological staining and micro-CT. From these evaluations, the fabricated scaffold demonstrated high porosity with good inter-pore connectivity, showed good biocompatibility and high compressive strength and modulus. In particular, the present study indicates that the GM scaffold using β-TCP accelerates new bone regeneration of implanted scaffolds. Accordingly, our scaffold is expected to act a useful application in the field of bone tissue engineering. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1779-1787, 2016. © 2016 Wiley Periodicals, Inc.

GATEWAY - COMMUNICATIONS GATEWAY SOFTWARE FOR NETEX, DECNET, AND TCP/IP

Science.gov (United States)

Keith, B.

1994-01-01

of bytes contained in each ransferred data packet. If GATEWAY detects an error during the data transfer, the sessions on both networks are terminated and the passive offer on the appropriate network is reissued. After performing the desired data transfer, one of the remote applications will send a network disconnect to the gateway to close its communication link. Upon detecting this network disconnect, GATEWAY replies with its own disconnect to ensure that the network connection has been fully terminated. Then, GATEWAY terminates its session with the other application by closing the communication link. GATEWAY has been implemented on a DEC VAX under VMS 4.7. It is written in ADA and has a central memory requirement of approximately 406K bytes. The communications protocols supported by GATEWAY are Network Systems Corporation's Network Executive (NETEX), Excelan's TCP/IP, and DECnet. GATEWAY was developed in 1988.

3D printed scaffolds of calcium silicate-doped β-TCP synergize with co-cultured endothelial and stromal cells to promote vascularization and bone formation.

Science.gov (United States)

Deng, Yuan; Jiang, Chuan; Li, Cuidi; Li, Tao; Peng, Mingzheng; Wang, Jinwu; Dai, Kerong

2017-07-17

Synthetic bone scaffolds have potential application in repairing large bone defects, however, inefficient vascularization after implantation remains the major issue of graft failure. Herein, porous β-tricalcium phosphate (β-TCP) scaffolds with calcium silicate (CS) were 3D printed, and pre-seeded with co-cultured human umbilical cord vein endothelial cells (HUVECs) and human bone marrow stromal cells (hBMSCs) to construct tissue engineering scaffolds with accelerated vascularization and better bone formation. Results showed that in vitro β-TCP scaffolds doped with 5% CS (5%CS/β-TCP) were biocompatible, and stimulated angiogenesis and osteogenesis. The results also showed that 5%CS/β-TCP scaffolds not only stimulated co-cultured cells angiogenesis on Matrigel, but also stimulated co-cultured cells to form microcapillary-like structures on scaffolds, and promoted migration of BMSCs by stimulating co-cultured cells to secrete PDGF-BB and CXCL12 into the surrounding environment. Moreover, 5%CS/β-TCP scaffolds enhanced vascularization and osteoinduction in comparison with β-TCP, and synergized with co-cultured cells to further increase early vessel formation, which was accompanied by earlier and better ectopic bone formation when implanted subcutaneously in nude mice. Thus, our findings suggest that porous 5%CS/β-TCP scaffolds seeded with co-cultured cells provide new strategy for accelerating tissue engineering scaffolds vascularization and osteogenesis, and show potential as treatment for large bone defects.

High-dispersion spectroscopy of the probable microlensing event TCP J05074264+2447555

Science.gov (United States)

Maehara, Hiroyuki

2017-11-01

We report the spectroscopic observation of TCP J05074264+2447555 which was discovered by Tadashi Kojima at 10.8 mag on 2017-10-31.7340 (http://www.cbat.eps.harvard.edu/unconf/followups/J05074264+2447555.html).

Radioiodination of protein using 2,3,5,6-tetrafluorophenyl 3-(nido-carboranyl) propionate (TCP) as a potential bi-functional linker: Synthesis and biodistribution in mice

International Nuclear Information System (INIS)

Lin Rushan; Liu Ning; Yang Yuanyou; Li Bing; Liao Jiali; Jin Jiannan

2009-01-01

2,3,5,6-Tetrafluorophenyl 3-(nido-carboranyl) propionate (TCP), as a new potential bi-functional linker for radiohalogenation of proteins or peptides, was synthesized. With this bi-functional linker, the first attempt to conjugate bovine serum albumin (BSA) with 125 I was made and the biodistribution of the conjugated BSA ( 125 I-TCP-BSA) was investigated in NIH strain mice. By the use of TCP as the linker, BSA was conjugated with 125 I in a labeling yield of 58-75% and with radiochemical purity of 99.8% after purification by Sephadex TM G-50. Even after being kept at room temperature for 72 h, the radiochemical purity of 125 I-TCP-BSA was still more than 98%, much higher than that of the directly 125 I-labeled BSA ( 125 I-BSA). Meanwhile, biodistribution experiments in mice indicated that the uptake of 125 I with 125 I-TCP-BSA into thyroid was obviously less than that with 125 I-BSA post-injection. All the results implied that the 125 I-conjugated BSA ( 125 I-TCP-BSA) was considerably stable in vivo as well as in vitro, and TCP was regarded as a promising bi-functional linker for radiohalogenation of proteins

Robotic hand with locking mechanism using TCP muscles for applications in prosthetic hand and humanoids

Science.gov (United States)

Saharan, Lokesh; Tadesse, Yonas

2016-04-01

This paper presents a biomimetic, lightweight, 3D printed and customizable robotic hand with locking mechanism consisting of Twisted and Coiled Polymer (TCP) muscles based on nylon precursor fibers as artificial muscles. Previously, we have presented a small-sized biomimetic hand using nylon based artificial muscles and fishing line muscles as actuators. The current study focuses on an adult-sized prosthetic hand with improved design and a position/force locking system. Energy efficiency is always a matter of concern to make compact, lightweight, durable and cost effective devices. In natural human hand, if we keep holding objects for long time, we get tired because of continuous use of energy for keeping the fingers in certain positions. Similarly, in prosthetic hands we also need to provide energy continuously to artificial muscles to hold the object for a certain period of time, which is certainly not energy efficient. In this work we, describe the design of the robotic hand and locking mechanism along with the experimental results on the performance of the locking mechanism.

Communication-Gateway Software For NETEX, DECnet, And TCP/IP

Science.gov (United States)

Keith, B.; Ferry, D.; Fendler, E.

1990-01-01

Communications gateway software, GATEWAY, provides process-to-process communication between remote applications programs in different protocol domains. Communicating peer processes may be resident on any paired combination of NETEX, DECnet, or TCP/IP hosts. Provides necessary mapping from one protocol to another and facilitates practical intermachine communications in cost-effective manner by eliminating need to standardize on single protocol or to implement multiple protocols in host computers. Written in Ada.

Manufacture of β-TCP/alginate scaffolds through a Fab@home model for application in bone tissue engineering

International Nuclear Information System (INIS)

Diogo, G S; Gaspar, V M; Serra, I R; Fradique, R; Correia, I J

2014-01-01

The growing need to treat bone-related diseases in an elderly population compels the development of novel bone substitutes to improve patient quality of life. In this context, the advent of affordable and effective rapid prototyping equipment, such as the Fab@home plotter, has contributed to the development of novel scaffolds for bone tissue engineering. In this study, we report for the first time the use of a Fab@home plotter for the production of 3D scaffolds composed by beta-tricalcium phosphate (β-TCP)/alginate hybrid materials. β-TCP/alginate mixtures were used in a proportion of 50/50% (w/w), 30/70% (w/w) and 20/80% (w/w). The printing parameters were optimized to a nozzle diameter of 20 Gauge for the production of rigid scaffolds with pre-defined architectures. We observed that, despite using similar printing parameters, both the precision and resolution of the scaffolds were significantly affected by the blend's viscosity. In particular, we demonstrate that the higher viscosity of 50/50 scaffolds (150.0 ± 3.91 mPa s) provides a higher precision in the extrusion process. The physicochemical and biological characterization of the samples demonstrated that the 50/50 scaffolds possessed a resistance to compression comparable to that of native trabecular bone. Moreover, this particular formulation also exhibited a Young's modulus that was higher than that of trabecular bone. Scanning electron microscopy and fluorescence microscopy analysis revealed that osteoblasts were able to adhere, proliferate and also penetrate into the scaffold's architecture. Altogether, our findings suggest that the Fab@home printer can be employed in the manufacture of reproducible scaffolds, using a formulation 50/50 alginate-β-TCP that has suitable properties to be applied as bone substitutes in the future. (paper)

ESTRATEGIA PARA EL PRONÓSTICO DEL RTO DE FAST TCP, MEDIANTE LÓGICA DIFUSA

Directory of Open Access Journals (Sweden)

Carlos Peña

2013-07-01

Full Text Available Este artículo presenta el diseño y la simulación de una estrategia para el pronóstico del temporizador de retransmisión del algoritmo de control de la congestión FAST TCP. La estrategia utiliza la técnica de inteligencia computacional denominada lógica difusa. Los resultados de la simulación demuestran que a través de esta nueva forma de pronóstico del RTO, FAST TCP hace un mejor seguimiento a la situación real de congestión de la red, en el marco de una conexión entre dos extremos de la misma.

Effect of citric acid on setting reaction and tissue response to β-TCP granular cement.

Science.gov (United States)

Fukuda, Naoyuki; Tsuru, Kanji; Mori, Yoshihide; Ishikawa, Kunio

2017-02-24

We recently reported that when an acidic calcium phosphate solution is mixed with β-tricalcium phosphate (β-TCP) granules, the resulting dicalcium phosphate dihydrate (DCPD) crystals form bridges between the β-TCP granules, creating a set interconnected porous structure in approximately 1 min. Although this self-setting β-TCP granular cement (β-TCPGC) is useful for clinical applications, the short setting time is a key drawback for handling. In this study, the setting time of β-TCPGC was adjusted with the addition of citric acid, which is a known inhibiter of DCPD crystal growth. As the concentration of citric acid in the acidic calcium phosphate solution increased, the amount of DCPD formation in the set β-TCPGC decreased, and the crystal morphology of DCPD became elongated. β-TCPGC prepared with various citric acid concentrations were used as grafting material in rat calvarial bone defects to evaluate bone regeneration in vivo. Four weeks after implantation, no inflammatory reaction and approximately 20% new bone formation were observed, regardless of the presence or absence of citric acid in the liquid phase of β-TCPGC. We concluded, therefore, that citric acid might be a useful retarder of β-TCPGC setting times.

Mechanical properties' improvement of a tricalcium phosphate scaffold with poly-l-lactic acid in selective laser sintering

International Nuclear Information System (INIS)

Liu, Defu; Zhuang, Jingyu; Shuai, Cijun; Peng, Shuping

2013-01-01

To improve the mechanical properties of a scaffold fabricated via selective laser sintering (SLS), a small amount (0.5–3 wt%) of poly-l-lactic acid (PLLA) is added to the β-tricalcium phosphate (β-TCP) powder. The fracture toughness of the scaffold prepared with the mixture powder containing 1 wt% PLLA increases by 18.18% and the compressive strength increases by 4.45% compared to the scaffold prepared from the β-TCP powder. The strengthening and toughening is related to the enhancement of β-TCP sintering characteristics via introducing a transient liquid phase in SLS. Moreover, the microcracks caused by the volume expansion due to the β–α phase transformation of TCP are reduced because of the PLLA inhibition function on the phase transformation. However, PLLA additive above 1 wt% would lead to a PLLA residue which will decrease the mechanical properties. The experimental results show that PLLA is an effective sintering aid to improve the mechanical properties of a TCP scaffold. (paper)

Design and development of FPGA based TCP/IP module for real time computers in nuclear power plants

International Nuclear Information System (INIS)

Balasri, G. Janani; Santhana Raj, A.; Gour, Aditya; Murali, N.; Manikandan, J.

2013-01-01

An VME (Virtual Module Europa) bus based Real Time Computer's (RTC's) are being developed for Prototype Fast Breeder Reactor (PFBR) which is in an advanced stage of construction at Kalpakkam, where the RTC's have to communicate to the central process computer on the data collected from the field instrument and receive data from the central process computer. A Distributed Digital Control System (DDSC) architecture has been designed for this communication which is based on Transfer Communication Protocol/Internet Protocol (TCP/IP) over Ethernet. Currently the RTC's uses 'Wiznet Module', a bought out chip which implements the TCP/IP stack in hardware. This project concentrates on the design and development of Field Programmable Gate Array (FPGA) based TCP/IP module that runs on Microblaze, a 32-bit softcore processor, to take care of the communication as that of Wiznet module. Advantage of switching over to FPGA based system are its reconfigurability, desired number of sockets, and the design is stable even if the FPGA's get obsolete. (author)

Passive Mobile Bandwidth Classification Using Short Lived TCP Connections

OpenAIRE

Michelinakis, Foivos; Kreitz, Gunnar; Petrocco, Riccardo; Zhang, Boxun; Widmer, Joerg

2015-01-01

Consumption of multimedia content is moving from a residential environment to mobile phones. Optimizing Quality of Experience—smooth, quick, and high quality playback—is more difficult in this setting, due to the highly dynamic nature of wireless links. A key requirement for achieving this goal is estimating the available bandwidth of mobile devices. Ideally, this should be done quickly and with low overhead. One challenge is that the majority of connections on mobiles are short-lived TCP con...

Structural and chemical analysis of silica-doped β-TCP ceramic coatings on surgical grade 316L SS for possible biomedical application

Directory of Open Access Journals (Sweden)

Karuppasamy Prem Ananth

2015-09-01

Full Text Available We have developed a novel approach to introduce silica-doped β-tricalcium phosphate (Si-β-TCP on 316L SS substrates for enhanced biological properties. Doping of β-TCP with silica loadings ranging from 0 to 8 mol% was carried out using chemical precipitation method. Si-β-TCP powder was sintered at 800 °C followed by coating it on 316L SS substrate using electrophoretic deposition. The coated and uncoated samples were investigated by various characterization techniques such as X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FTIR, field emission scanning electron microscopy (FESEM and X-ray fluorescence spectroscopy (XRF. Biomineralization ability of the coatings was evaluated by immersing in simulated body fluid (SBF solution for different number of days such as 7, 14, 21 and 28 days. The results obtained in our study have shown that the apatite formation ability was high for the 8 mol% of Si-β-TCP. This will promote better biomineralization ability compared to the other coatings.

New approach in subjective and objective speech transmission quality measurement in TCP/IP networks

International Nuclear Information System (INIS)

Souček, Pavel; Slavata, Oldřich; Holub, Jan

2015-01-01

This paper deals with problems of speech transmission quality measurement in modern telecommunication networks. It focuses on problems caused by specific types of distortions and errors caused present in transmissions using TCP/IP networks

In vitro biological evaluation of beta-TCP/HDPE--A novel orthopedic composite: a survey using human osteoblast and fibroblast bone cells.

Science.gov (United States)

Homaeigohar, S Sh; Shokrgozar, M A; Khavandi, A; Sadi, A Yari

2008-02-01

Beta-tricalcium phosphate reinforced high density polyethylene (beta-TCP/HDPE) was prepared to simulate bone composition and to study its capacity to act as bone tissue. This material was produced by replacing the mineral component and collagen soft tissue of the bone with beta-TCP and HDPE, respectively. The biocompatibility of the composite samples with different volume fractions of TCP (20, 30 and 40 vol %) was examined in vitro using two osteoblast cell lines G-292 and Saos-2, and also a type of fibroblast cell isolated from bone tissue, namely human bone fibroblast (HBF) by proliferation, and cell adhesion assays. Cell-material interaction with the surface of the composite samples was examined by scanning electron microscopy (SEM). The effect of beta-TCP/HDPE on the behavior of osteoblast and fibroblast cells was compared with those of composite and negative control samples; polyethylene (PE) and tissue culture polystyrene (TPS), respectively. In general, the results showed that the composite samples containing beta-TCP as reinforcement supported a higher rate of proliferation by various bone cells after 3, 7, and 14 days of incubation compared to the composite control sample. Furthermore, more osteoblast cells were attached to the surface of the composite samples when compared to the composite control samples after the above incubation periods (p HDPE composites are biocompatible, nontoxic, and act to stimulate proliferation and adhesion of the cells, whether osteoblast or fibroblast. (c) 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008.

Application Filters for TCP/IP Industrial Automation Protocols

Science.gov (United States)

Batista, Aguinaldo B.; Kobayashi, Tiago H.; Medeiros, João Paulo S.; Brito, Agostinho M.; Motta Pires, Paulo S.

The use of firewalls is a common approach usually meant to secure Automation Technology (AT) from Information Technology (TI) networks. This work proposes a filtering system for TCP/IP-based automation networks in which only certain kind of industrial traffic is permitted. All network traffic which does not conform with a proper industrial protocol pattern or with specific rules for its actions is supposed to be abnormal and must be blocked. As a case study, we developed a seventh layer firewall application with the ability of blocking spurious traffic, using an IP packet queueing engine and a regular expression library.

Combination of BMP-2-releasing gelatin/β-TCP sponges with autologous bone marrow for bone regeneration of X-ray-irradiated rabbit ulnar defects.

Science.gov (United States)

Yamamoto, Masaya; Hokugo, Akishige; Takahashi, Yoshitake; Nakano, Takayoshi; Hiraoka, Masahiro; Tabata, Yasuhiko

2015-07-01

The objective of this study is to evaluate the feasibility of gelatin sponges incorporating β-tricalcium phosphate (β-TCP) granules (gelatin/β-TCP sponges) to enhance bone regeneration at a segmental ulnar defect of rabbits with X-ray irradiation. After X-ray irradiation of the ulnar bone, segmental critical-sized defects of 20-mm length were created, and bone morphogenetic protein-2 (BMP-2)-releasing gelatin/β-TCP sponges with or without autologous bone marrow were applied to the defects to evaluate bone regeneration. Both gelatin/β-TCP sponges containing autologous bone marrow and BMP-2-releasing sponges enhanced bone regeneration at the ulna defect to a significantly greater extent than the empty sponges (control). However, in the X-ray-irradiated bone, the bone regeneration either by autologous bone marrow or BMP-2 was inhibited. When combined with autologous bone marrow, the BMP-2 exhibited significantly high osteoinductivity, irrespective of the X-ray irradiation. The bone mineral content at the ulna defect was similar to that of the intact bone. It is concluded that the combination of bone marrow with the BMP-2-releasing gelatin/β-TCP sponge is a promising technique to induce bone regeneration at segmental bone defects after X-ray irradiation. Copyright © 2015 Elsevier Ltd. All rights reserved.

The FEROL40, a microTCA card interfacing custom point-to-point links and standard TCP/IP

CERN Document Server

Gigi, Dominique; Behrens, Ulf; Branson, James; Chaze, Olivier; Cittolin, Sergio; Contescu, Cristian; da Silva Gomes, Diego; Darlea, Georgiana-Lavinia; Deldicque, Christian; Demiragli, Zeynep; Dobson, Marc; Doualot, Nicolas; Erhan, Samim; Fulcher, Jonathan Richard; Gladki, Maciej; Glege, Frank; Gomez-Ceballos, Guillelmo; Hegeman, Jeroen; Holzner, Andre; Janulis, Mindaugas; Lettrich, Michael; Meijers, Frans; Meschi, Emilio; Mommsen, Remigius K; Morovic, Srecko; O'Dell, Vivian; Orn, Samuel Johan; Orsini, Luciano; Papakrivopoulos, Ioannis; Paus, Christoph; Petrova, Petia; Petrucci, Andrea; Pieri, Marco; Rabady, Dinyar; Racz, Attila; Reis, Thomas; Sakulin, Hannes; Schwick, Christoph; Simelevicius, Dainius; Vazquez Velez, Cristina; Vougioukas, Michail; Zejdl, Petr

2017-01-01

In order to accommodate new back-end electronics of upgraded CMS sub-detectors, a new FEROL40 card in the microTCA standard has been developed. The main function of the FEROL40 is to acquire event data over multiple point-to-point serial optical links, provide buffering, perform protocol conversion, and transmit multiple TCP/IP streams (4x10Gbps) to the Ethernet network of the aggregation layer of the CMS DAQ (data acquisition) event builder. This contribution discusses the design of the FEROL40 and experience from operation.

Feasibility of TCP-based dose painting by numbers applied to a prostate case with 18F-choline PET imaging

International Nuclear Information System (INIS)

Dirscherl, Thomas; Bogner, Ludwig; Rickhey, Mark

2012-01-01

Introduction: A biologically adaptive radiation treatment method to maximize the TCP is shown. Functional imaging is used to acquire a heterogeneous dose prescription in terms of Dose Painting by Numbers and to create a patient-specific IMRT plan. Method and Materials: Adapted from a method for selective dose escalation under the guidance of spatial biology distribution, a model, which translates heterogeneously distributed radiobiological parameters into voxelwise dose prescriptions, was developed. At the example of a prostate case with 18 F-choline PET imaging, different sets of reported values for the parameters were examined concerning their resulting range of dose values. Furthermore, the influence of each parameter of the linear-quadratic model was investigated. A correlation between PET signal and proliferation as well as cell density was assumed. Using our in-house treatment planning software Direct Monte Carlo Optimization (DMCO), a treatment plan based on the obtained dose prescription was generated. Gafchromic EBT films were irradiated for evaluation. Results: When a TCP of 95% was aimed at, the maximal dose in a voxel of the prescription exceeded 100 Gy for most considered parameter sets. One of the parameter sets resulted in a dose range of 87.1 Gy to 99.3 Gy, yielding a TCP of 94.7%, and was investigated more closely. The TCP of the plan decreased to 73.5% after optimization based on that prescription. The dose difference histogram of optimized and prescribed dose revealed a mean of -1.64 Gy and a standard deviation of 4.02 Gy. Film verification showed a reasonable agreement of planned and delivered dose. Conclusion: If the distribution of radiobiological parameters within a tumor is known, this model can be used to create a dose-painting by numbers plan which maximizes the TCP. It could be shown, that such a heterogeneous dose distribution is technically feasible. (orig.)

Effects of DCPD cement chemistry on degradation properties and cytocompatibility: comparison of MCPM/β-TCP and MCPM/HA formulations

International Nuclear Information System (INIS)

Alge, Daniel L; Goebel, W Scott; Chu, Tien-Min Gabriel

2013-01-01

Dicalcium phosphate dihydrate (DCPD) cements are attractive biomaterials for bone repair, and a number of different DCPD cement formulations have been proposed in the literature. In this study, we have specifically compared monocalcium phosphate monohydrate (MCPM)/hydroxyapatite (HA) and MCPM/β-tricalcium phosphate (β-TCP) formulations to test the hypothesis that DCPD cement chemistry affects the degradation properties and cytocompatibility of the cement. Using simple in vitro models we found that MCPM/β-TCP formulations degraded primarily by DCPD dissolution, which was associated with a slight pH drop and relatively low mass loss. Cytocompatibility testing of cement conditioned culture media revealed no significant change in cell viability relative to the negative control for all of the MCPM/β-TCP formulations. In contrast, the MCPM/HA formulations were prone to undergo rapid conversion of DCPD to HA, resulting in a sharp pH drop and extensive mass loss. A stoichiometric excess of HA in the cement was found to accelerate the conversion process, and significant cytotoxicity was observed for the MCPM/HA formulations containing excess HA. Collectively, these results show that, although the product of the setting reaction is the same, DCPD cements produced with MCPM/HA and MCPM/β-TCP formulations differ significantly in their degradation properties and cytocompatibility. These differences may have important implications for the selection of a DCPD cement formulation for clinical application. (paper)

SU-E-J-30: Benchmark Image-Based TCP Calculation for Evaluation of PTV Margins for Lung SBRT Patients

Energy Technology Data Exchange (ETDEWEB)

Li, M [Wayne State Univeristy, Detroit, MI (United States); Chetty, I [Henry Ford Health System, Detroit, MI (United States); Zhong, H [Henry Ford Hospital System, Detroit, MI (United States)

2014-06-01

Purpose: Tumor control probability (TCP) calculated with accumulated radiation doses may help design appropriate treatment margins. Image registration errors, however, may compromise the calculated TCP. The purpose of this study is to develop benchmark CT images to quantify registration-induced errors in the accumulated doses and their corresponding TCP. Methods: 4DCT images were registered from end-inhale (EI) to end-exhale (EE) using a “demons” algorithm. The demons DVFs were corrected by an FEM model to get realistic deformation fields. The FEM DVFs were used to warp the EI images to create the FEM-simulated images. The two images combined with the FEM DVF formed a benchmark model. Maximum intensity projection (MIP) images, created from the EI and simulated images, were used to develop IMRT plans. Two plans with 3 and 5 mm margins were developed for each patient. With these plans, radiation doses were recalculated on the simulated images and warped back to the EI images using the FEM DVFs to get the accumulated doses. The Elastix software was used to register the FEM-simulated images to the EI images. TCPs calculated with the Elastix-accumulated doses were compared with those generated by the FEM to get the TCP error of the Elastix registrations. Results: For six lung patients, the mean Elastix registration error ranged from 0.93 to 1.98 mm. Their relative dose errors in PTV were between 0.28% and 6.8% for 3mm margin plans, and between 0.29% and 6.3% for 5mm-margin plans. As the PTV margin reduced from 5 to 3 mm, the mean TCP error of the Elastix-reconstructed doses increased from 2.0% to 2.9%, and the mean NTCP errors decreased from 1.2% to 1.1%. Conclusion: Patient-specific benchmark images can be used to evaluate the impact of registration errors on the computed TCPs, and may help select appropriate PTV margins for lung SBRT patients.

SU-E-J-30: Benchmark Image-Based TCP Calculation for Evaluation of PTV Margins for Lung SBRT Patients

International Nuclear Information System (INIS)

Li, M; Chetty, I; Zhong, H

2014-01-01

Purpose: Tumor control probability (TCP) calculated with accumulated radiation doses may help design appropriate treatment margins. Image registration errors, however, may compromise the calculated TCP. The purpose of this study is to develop benchmark CT images to quantify registration-induced errors in the accumulated doses and their corresponding TCP. Methods: 4DCT images were registered from end-inhale (EI) to end-exhale (EE) using a “demons” algorithm. The demons DVFs were corrected by an FEM model to get realistic deformation fields. The FEM DVFs were used to warp the EI images to create the FEM-simulated images. The two images combined with the FEM DVF formed a benchmark model. Maximum intensity projection (MIP) images, created from the EI and simulated images, were used to develop IMRT plans. Two plans with 3 and 5 mm margins were developed for each patient. With these plans, radiation doses were recalculated on the simulated images and warped back to the EI images using the FEM DVFs to get the accumulated doses. The Elastix software was used to register the FEM-simulated images to the EI images. TCPs calculated with the Elastix-accumulated doses were compared with those generated by the FEM to get the TCP error of the Elastix registrations. Results: For six lung patients, the mean Elastix registration error ranged from 0.93 to 1.98 mm. Their relative dose errors in PTV were between 0.28% and 6.8% for 3mm margin plans, and between 0.29% and 6.3% for 5mm-margin plans. As the PTV margin reduced from 5 to 3 mm, the mean TCP error of the Elastix-reconstructed doses increased from 2.0% to 2.9%, and the mean NTCP errors decreased from 1.2% to 1.1%. Conclusion: Patient-specific benchmark images can be used to evaluate the impact of registration errors on the computed TCPs, and may help select appropriate PTV margins for lung SBRT patients

Use of Bacillus thuringiensis supernatant from a fermentation process to improve bioremediation of chlorpyrifos in contaminated soils.

Science.gov (United States)

Aceves-Diez, Angel E; Estrada-Castañeda, Kelly J; Castañeda-Sandoval, Laura M

2015-07-01

The aim of this research was to investigate the potential of a nutrient-rich organic waste, namely the cell-free supernatant of Bacillus thuringiensis (BtS) gathered from fermentation, as a biostimulating agent to improve and sustain microbial populations and their enzymatic activities, thereby assisting in the bioremediation of chlorpyrifos-contaminated soil at a high dose (70 mg kg(-1)). Experiments were performed for up to 80 d. Chlorpyrifos degradation and its major metabolic product, 3,5,6-trichloro-2-pyridinol (TCP), were quantified by high-performance liquid chromatography (HPLC); total microbial populations were enumerated by direct counts in specific medium; and fluorescein diacetate (FDA) hydrolysis was measured as an index of soil microbial activity. Throughout the experiment, there was higher chlorpyrifos degradation in soil supplemented with BtS (83.1%) as compared to non-supplemented soil. TCP formation and degradation occurred in all soils, but the greatest degradation (30.34%) was observed in soil supplemented with BtS. The total microbial populations were significantly improved by supplementation with BtS. The application of chlorpyrifos to soil inhibited the enzymatic activity; however, this negative effect was counteracted by BtS, inducing an increase of approximately 16% in FDA hydrolysis. These results demonstrate the potential of B. thuringiensis supernatant as a suitable biostimulation agent for enhancing chlorpyrifos and TCP biodegradation in chlorpyrifos-contaminated soils. Copyright © 2015 Elsevier Ltd. All rights reserved.

Potential implications of the bystander effect on TCP and EUD when considering target volume dose heterogeneity.

Science.gov (United States)

Balderson, Michael J; Kirkby, Charles

2015-01-01

In light of in vitro evidence suggesting that radiation-induced bystander effects may enhance non-local cell killing, there is potential for impact on radiotherapy treatment planning paradigms such as the goal of delivering a uniform dose throughout the clinical target volume (CTV). This work applies a bystander effect model to calculate equivalent uniform dose (EUD) and tumor control probability (TCP) for external beam prostate treatment and compares the results with a more common model where local response is dictated exclusively by local absorbed dose. The broad assumptions applied in the bystander effect model are intended to place an upper limit on the extent of the results in a clinical context. EUD and TCP of a prostate cancer target volume under conditions of increasing dose heterogeneity were calculated using two models: One incorporating bystander effects derived from previously published in vitro bystander data ( McMahon et al. 2012 , 2013a); and one using a common linear-quadratic (LQ) response that relies exclusively on local absorbed dose. Dose through the CTV was modelled as a normal distribution, where the degree of heterogeneity was then dictated by changing the standard deviation (SD). Also, a representative clinical dose distribution was examined as cold (low dose) sub-volumes were systematically introduced. The bystander model suggests a moderate degree of dose heterogeneity throughout a target volume will yield as good or better outcome compared to a uniform dose in terms of EUD and TCP. For a typical intermediate risk prostate prescription of 78 Gy over 39 fractions maxima in EUD and TCP as a function of increasing SD occurred at SD ∼ 5 Gy. The plots only dropped below the uniform dose values for SD ∼ 10 Gy, almost 13% of the prescribed dose. Small, but potentially significant differences in the outcome metrics between the models were identified in the clinically-derived dose distribution as cold sub-volumes were introduced. In terms of

Evaluation of autogenous PRGF+β-TCP with or without a collagen membrane on bone formation and implant osseointegration in large size bone defects. A preclinical in vivo study.

Science.gov (United States)

Batas, Leonidas; Stavropoulos, Andreas; Papadimitriou, Serafim; Nyengaard, Jens R; Konstantinidis, Antonios

2016-08-01

The aim of this study was to evaluate whether the adjunctive use of a collagen membrane enhances bone formation and implant osseointegration in non-contained defects grafted with chair-side prepared autologous platelet-rich growth factor (PRGF) adsorbed on a β-TCP particulate carrier. Large box-type defects (10 × 6 mm; W × D) were prepared in the edentulated and completely healed mandibles of six Beagles dogs. An implant with moderately rough surface was placed in the center of each defect leaving the coronal 6 mm of the implant not covered with bone. The remaining defect space was then filled out with chair-side prepared autologous PRGF adsorbed on β-TCP particles and either covered with a collagen membrane (PRGF/β-TCP+CM) (6 defects) or left without a membrane (PRGF/β-TCP) (5 defects). Histology 4 months post-op showed new lamellar and woven bone formation encompassing almost entirely the defect and limited residual β-TCP particles. Extent of osseointegration of the previously exposed portion of the implants varied, but in general was limited. Within the defect, new mineralized bone (%) averaged 43.2 ± 9.86 vs. 39.9 ± 13.7 in the PRGF/β-TCP+CM and PRGF/β-TCP group (P = 0.22) and relative mineralized bone-to-implant contact (%) averaged 26.2 ± 16.45 vs. 35.91 ± 24.45, respectively (P = 0.5). First, bone-to-implant contact from the implant top was 4.1 ± 1.5 and 3.2 ± 2.3 (P = 0.9), in the PRGF/β-TCP+CM and PRGF/β-TCP group, respectively. Implantation of chair-side prepared autologous PRGF adsorbed on a β-TCP carrier in non-contained peri-implant defects resulted in large amounts of bone regeneration, but osseointegration was limited. Provisions for GBR with a collagen membrane did not significantly enhance bone regeneration or implant osseointegration. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

STUDY THE EFFECTIVENESS APPLICATIONS OF FUZZY CONTROLLER WITH TWO ENTRANCES IN THE SYSTEM OF ACTIVE QUEUE MANAGEMENT THE PACKETS IN TCP/IP NETWORKS

Directory of Open Access Journals (Sweden)

O. V. Nevdachyna

2016-01-01

Full Text Available The paper presents an approach to solving the overloading problem in TCP/IP networks. Offered fuzzy controller with two inputs for system of active queue management packages in TCP/IP networks, and investigated its use in these systems with a random change of traffic load. Proposed controller has two inputs, one of which is the value of the difference between the current queue length and the second – the difference between the current level of usage of the buffer. The output of the fuzzy controller calculates the probability of discarding packet.Mathematical model system of active queue management that is studied is presented in an interactive MATLAB system, in wherein also is demonstrated the processes occurring in the system with a random change of traffic load. The research results show that the AQM-system with fuzzy controller with two entrances stable enough maintains the desired current length the queue for sufficiently small values of the probability of dropping/marking packets (at acceptable size of queue q0= 200 packets, the average probability of dropping / marking is not more than 3,5×10–3 or less 0,35% packets is discarded or marked from the total number of incoming packets. The results obtained will help improve the efficiency of the functioning and operation of TCP / IP networks by increasing data transmission quality. this happens due introduction of the proposed controller at the design of new, more efficient routers for networks to minimize the delay of information.

β-TCP/HA with or without enamel matrix proteins for maxillary sinus floor augmentation

DEFF Research Database (Denmark)

Nery, James Carlos; Pereira, Luís Antônio Violin Dias; Guimarães, George Furtado

2017-01-01

BACKGROUND: It is still unclear whether enamel matrix proteins (EMD) as adjunct to bone grafting enhance bone healing. This study compared histomorphometrically maxillary sinus floor augmentation (MSFA) with β-TCP/HA in combination with or without EMD in humans. METHODS: In ten systemically healthy...

On the Behavior of ECN/RED Gateways Under a Large Number of TCP Flows: Limit Theorems

National Research Council Canada - National Science Library

Tinnakornsrisuphap, Peerapol; Makowski, Armand M

2005-01-01

.... As the number of competing flows becomes large, the asymptotic queue behavior at the gateway can be described by a simple recursion and the throughput behavior of individual TCP flows becomes asymptotically independent...

MOC Efficiency Improvements Using a Jacobi Inscatter Approximation

International Nuclear Information System (INIS)

Stimpson, Shane; Collins, Benjamin; Kochunas, Brendan

2016-01-01

In recent weeks, attention has been given to resolving the convergence issues encountered with TCP_0 by trying a Jacobi (J) inscatter approach when group sweeping, where the inscatter source is constructed using the previous iteration flux. This is in contrast to a Gauss-Seidel (GS) approach, which has been the default to-date, where the scattering source uses the most up-to-date flux values. The former is consistent with CASMO, which has no issues with TCP_0 convergence. Testing this out on a variety of problems has demonstrated that the Jacobi approach does indeed provide substantially more stability, though can take more outer iterations to converge. While this is not surprising, there are improvements that can be made to the MOC sweeper to capitalize on the Jacobi approximation and provide substantial speedup. For example, the loop over groups, which has traditionally been the outermost loop in MPACT, can be moved to the interior, avoiding duplicate modular ray trace and coarse ray trace setup (mapping coarse mesh surface indexes), which needs to be performed repeatedly when group is outermost.

beta-TCP Versus Autologous Bone for Repair of Alveolar Clefts in a Goat Model.

NARCIS (Netherlands)

Ruiter, A. de; Meijer, G.J.; Dormaar, T.; Janssen, N.; Bilt, A. van der; Slootweg, P.J.; Bruijn, J. de; Rijn, L. van; Koole, R.A.

2011-01-01

Objective : The aim of this study in goats was to test the hypothesis that a novel synthetic bone substitute beta tricalcium phosphate (beta-TCP) can work as well as autologous bone harvested from the iliac crest for grafting and repair of alveolar clefts. Design : Ten adult Dutch milk goats ( Capra

Periodontal wound healing/regeneration following the application of rhGDF-5 in a beta-TCP/PLGA carrier in critical-size supra-alveolar periodontal defects in dogs.

Science.gov (United States)

Kwon, David H; Bisch, Frederick C; Herold, Robert W; Pompe, Cornelius; Bastone, Patrizia; Rodriguez, Nancy A; Susin, Cristiano; Wikesjö, Ulf M E

2010-07-01

The objective of this study was to evaluate the effect of a novel recombinant human GDF-5 (rhGDF-5) construct intended for onlay and inlay indications on periodontal wound healing/regeneration. Contralateral, surgically created, critical-size, 6-mm, supra-alveolar periodontal defects in five adult Hound Labrador mongrel dogs received rhGDF-5 coated onto beta-tricalcium phosphate (beta-TCP) particles and immersed in a bioresorbable poly(lactic-co-glycolic acid) (PLGA) composite or the beta-TCP/PLGA carrier alone (control). The rhGDF-5 and control constructs were moulded around the teeth and allowed to set. The gingival flaps were then advanced; flap margins were adapted 3-4 mm coronal to the teeth and sutured. The animals were euthanized at 8 weeks post-surgery when block biopsies were collected for histometric analysis. Healing was generally uneventful. A few sites exhibited minor exposures. Three control sites and one rhGDF-5 site (in separate animals) experienced more extensive wound dehiscencies. The rhGDF-5 and control constructs were easy to apply and exhibited adequate structural integrity to support the mucoperiosteal flaps in this challenging onlay model. Limited residual beta-TCP particles were observed at 8 weeks for both rhGDF-5/beta-TCP/PLGA and beta-TCP/PLGA control sites. The rhGDF-5/beta-TCP/PLGA sites showed significantly greater cementum (2.34 +/- 0.44 versus 1.13 +/- 0.25 mm, p=0.02) and bone (2.92 +/- 0.66 versus 1.21 +/- 0.30 mm, p=0.02) formation compared with the carrier control. Limited ankylosis was observed in four of five rhGDF-5/beta-TCP/PLGA sites but not in control sites. Within the limitations of this study, the results suggest that rhGDF-5 is a promising candidate technology in support of periodontal wound healing/regeneration. Carrier and rhGDF-5 dose optimization are necessary before further advancement of the technology towards clinical evaluation.

STUDY OF TCP PHASE PRECIPITATING IN GH4199 SUPERALLOY

Institute of Scientific and Technical Information of China (English)

T．Cui; Y．S．Zhang; S．W．Guo; L．Wang; H．C．Yang

2004-01-01

The precipitating regulation and mechanism of TCP phase (μ phase and σ phase) are studied, using electron hole number (EHN) theory, phase analysis technology and TEM observation. The results indicate that the EHN in studied alloy is 2.311-2.348 which is higher than that of critical EHN of μ phase precipitate (2.30), so μ phase could precipitate if there is enough thermo-exposition. In contrast, the calculated EHN is less than that of critical EHN of σ phase precipitate (2.52). However the σ phase is also observed by TEM.Enrich of Cr and Mo around γ phase after γ' phase precipitated leads to σ phase precipitated.

Hypo-fractionated treatment in radiotherapy: radio-biological models Tcp and NTCP; Tratamiento hipofraccionado en radioterapia: modelos radiobiologicos TCP y NTCP

Energy Technology Data Exchange (ETDEWEB)

Astudillo V, A. J.; Mitsoura, E. [Universidad Autonoma del Estado de Mexico, Facultad de Medicina, Paseo Tollocan s/n, 50180 Toluca, Estado de Mexico (Mexico); Paredes G, L. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Resendiz G, G., E-mail: lydia.paredes@inin.gob.mx [Hospital Medica Sur, Departamento de Radioterapia, Puente de Piedra 150, Col. Toriello Guerra, 14050 Mexico D. F. (Mexico)

2014-08-15

At the present time the breast cancer in Mexico has the first place of incidence of the malignant neoplasia s in the women, and represents 11.34% of all the cancer cases. On the other hand, the treatments for cancer by means of ionizing radiations have been dominated under the approaches of the medical radio-oncologists which have been based on test and error by many years. The radio-biological models, as the Tcp, NTCP and dosimetric variables, for their clinical application in the conventional radiotherapy with hypo-fractionation have as purpose predicting personalized treatment plans that they present most probability of tumor control and minor probability of late reactions, becoming this way support tools in the decisions taking for the patient treatments planning of Medical Physicists and Radio-oncologists. (Author)

Bone Regeneration Using a Mixture of Silicon-Substituted Coral HA and β-TCP in a Rat Calvarial Bone Defect Model

Directory of Open Access Journals (Sweden)

Jiyeon Roh

2016-02-01

Full Text Available The demand of bone graft materials has been increasing. Among various origins of bone graft materials, natural coral composed of up to 99% calcium carbonate was chosen and converted into hydroxyapatite (HA; silicon was then substituted into the HA. Then, the Si-HA was mixed with β-tricalcium phosphate (TCP in the ratios 100:0 (S100T0, 70:30 (S70T30, 60:40 (S60T40, and 50:50 (S50T50. The materials were implanted for four and eight weeks in a rat calvarial bone defect model (8 mm. The MBCPTM (HA:β-TCP = 60:40, Biomatalante, Vigneux de Bretagne, France was used as a control. After euthanasia, the bone tissue was analyzed by making histological slides. From the results, S60T40 showed the fastest bone regeneration in four weeks (p < 0.05. In addition, S60T40, S50T50, and MBCPTM showed significant new bone formation in eight weeks (p < 0.05. In conclusion, Si-HA/TCP showed potential as a bone graft material.

Modeling of twisted and coiled polymer (TCP) muscle based on phenomenological approach

Science.gov (United States)

Karami, Farzad; Tadesse, Yonas

2017-12-01

Twisted and coiled polymers (TCP) muscles are linear actuators that respond to change in temperature. Exploiting high negative coefficient of thermal expansion (CTE) and helical geometry give them a significant ability to change length in a limited temperature range. Several applications and experimental data of these materials have been demonstrated in the last few years. To use these actuators in robotics and control system applications, a mathematical model for predicting their behavior is essential. In this work, a practical and accurate phenomenological model for estimating the displacement of TCP muscles, as a function of the load as well as input electrical current, is proposed. The problem is broken down into two parts, i.e. modeling of the electro-thermal and then the thermo-elastic behavior of the muscles. For the first part, a differential equation, with changing electrical resistance term, is derived. Next, by using a temperature-dependent modulus of elasticity and CTE as well as taking the geometry of the muscles into account, an expression for displacement is derived. Experimental data for different loads and actuation current levels are used for verifying the model and investigating its accuracy. The result shows a good agreement between the simulation and experimental results for all loads.

Performance evaluation of a high-speed switched network for PACS

Science.gov (United States)

Zhang, Randy H.; Tao, Wenchao; Huang, Lu J.; Valentino, Daniel J.

1998-07-01

We have replaced our shared-media Ethernet and FDDI network with a multi-tiered, switched network using OC-12 (622 Mbps) ATM for the network backbone, OC3 (155 Mbps) connections to high-end servers and display workstations, and switched 100/10 Mbps Ethernet for workstations and desktop computers. The purpose of this research was to help PACS designers and implementers understand key performance factors in a high- speed switched network by characterizing and evaluating its image delivery performance, specifically, the performance of socket-based TCP (Transmission Control Protocol) and DICOM 3.0 communications. A test network within the UCLA Clinical RIS/PACS was constructed using Sun UltraSPARC-II machines with ATM, Fast Ethernet, and Ethernet network interfaces. To identify performance bottlenecks, we evaluated network throughput for memory to memory, memory to disk, disk to memory, and disk to disk transfers. To evaluate the effect of file size, tests involving disks were further divided using sizes of small (514 KB), medium (8 MB), and large (16 MB) files. The observed maximum throughput for various network configurations using the TCP protocol was 117 Mbps for memory to memory and 88 MBPS for memory to disk. For disk to memory, the peak throughput was 98 Mbps using small files, 114 Mbps using medium files, and 116 Mbps using large files. The peak throughput for disk to disk became 64 Mbps using small files and 96 Mbps using medium and large files. The peak throughput using the DICOM 3.0 protocol was substantially lower in all categories. The measured throughput varied significantly among the tests when TCP socket buffer was raised above the default value. The optimal buffer size was approximately 16 KB or the TCP protocol and around 256 KB for the DICOM protocol. The application message size also displayed distinctive effects on network throughput when the TCP socket buffer size was varied. The throughput results for Fast Ethernet and Ethernet were expectedly

The Association between State Value-added Taxes and Tobacco Use in India- Evidence from GATS and TCP India Survey.

Science.gov (United States)

Shang, Ce; Chaloupka, Frank J; Fong, Geoffrey T; Gupta, Prakash C; Pednekar, Mangesh S

2017-08-30

State value-added taxes (VAT) on tobacco products have been increased significantly in recent years in India. Evidence on how these VATs were associated with smoking is highly needed. State bidi and cigarette VAT rates were linked to Global Adult Tobacco Survey (GATS) India 2009-2010 and Tobacco Control Policy (TCP) India Survey waves 1 (2010-2011) and 2 (2012-2013), respectively. These linked data were used to analyze the associations between bidi VAT rates and bidi smoking, between cigarette VAT rates and cigarette smoking, and between the two VAT rates and dual use of bidis and cigarettes. Weighted logistic regressions were employed to examine GATS cross-sectional data, whereas Generalized Estimating Equations (GEE) were employed to examine longitudinal TCP data. We further stratified the analyses by gender. A 10% increase in cigarette VAT rates was associated with a 6.5% (p<0.001) decrease in dual use of cigarettes and bidis among adults and a 0.9% decrease (p<0.05) in cigarette smoking among males in TCP; and with a 21.6% decrease (p<0.05) in dual use among adults and a 17.2% decrease (p<0.001) in cigarette smoking among males in GATS. TCP analyses controlling for state fixed effects are less likely to be biased and indicate a cigarette price elasticity of - 0.44. As female smoking prevalence was extremely low, these associations were non-significant for females. Higher state cigarette VAT rates in India were significantly associated with lower cigarette smoking and lower dual use of cigarettes and bidis. Increasing state VAT rates may significantly reduce smoking in India. © The Author 2017. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Comparative Efficacies of Collagen-Based 3D Printed PCL/PLGA/?-TCP Composite Block Bone Grafts and Biphasic Calcium Phosphate Bone Substitute for Bone Regeneration

OpenAIRE

Hwang, Kyoung-Sub; Choi, Jae-Won; Kim, Jae-Hun; Chung, Ho Yun; Jin, Songwan; Shim, Jin-Hyung; Yun, Won-Soo; Jeong, Chang-Mo; Huh, Jung-Bo

2017-01-01

The purpose of this study was to compare bone regeneration and space maintaining ability of three-dimensional (3D) printed bone grafts with conventional biphasic calcium phosphate (BCP). After mixing polycaprolactone (PCL), poly (lactic-co-glycolic acid) (PLGA), and ?-tricalcium phosphate (?-TCP) in a 4:4:2 ratio, PCL/PLGA/?-TCP particulate bone grafts were fabricated using 3D printing technology. Fabricated particulate bone grafts were mixed with atelocollagen to produce collagen-based PCL/P...

TINY TCP/IP PROTOCOL SUITE FOR EMBEDDED SYSTEMS WITH 32 BIT MICROCONTROLLER

OpenAIRE

Mr. Praful M. Godhankar; Mr. Maske Vishnu Dattatraya; Prof. Shahzia Sayyad

2015-01-01

The scope of embedded devices is increasing day by day and the demand will be further more when networking technology is incorporated into these devices. Many embedded systems not only communicate with each other, but also with computers using a network. All systems connected to the Internet, wireless networks such as WLAN and GPRS, and many local area networks communicate using the standard TCP/IP protocol suite. An embedded system may have as little memory, the memory constraints make progr...

SU-F-J-187: The Statistical NTCP and TCP Models in the Proton Therapy

Energy Technology Data Exchange (ETDEWEB)

Jang, S [Princeton Radiation Oncology, Princeton Radiation Oncology (United States); Frometa, T [Theoretical and Computational Methods Working Group of IMAG, Santiago de Cuba (Cuba); Pyakuryal, A [National Cancer Institute, Rockville, MD (United States); Sio, T [MD Anderson Cancer Center, Houston, TX (United States); Piseaux, R [Northwestern University, Chicago, IL (United States); Acosta, S [Provincial Hospital of Santiago de Cuba, Santiago de Cuba (Cuba); Ocana, K [Faculty of Electrics of the University of Oriente, Santiago de Cuba (Cuba)

2016-06-15

Purpose: The statistical models (SM) are typically used as a subjective description of a population for which there is only limited sample data, and especially in cases where the relationship between variables is known. The normal tissue complications and tumor control are frequently stochastic effects in the Radiotherapy (RT). Based on probabilistic treatments, it recently has been formulated new NTCP and TCP models for the RT. Investigating the particular requirements for their clinical use in the proton therapy (PT) is the goal of this work. Methods: The SM can be used as phenomenological or mechanistic models. The former way allows fitting real data and getting theirparameters. In the latter one, we should do efforts for determining the parameters through the acceptable estimations, measurements, and/or simulation experiments. Experimental methodologies for determination of the parameters have been developed from the fraction cells surviving the proton irradiation curves in tumor and OAR, and precise RBE models are used for calculating the variable of effective dose. As the executions of these methodologies have a high costs, so we have developed computer tools enable to perform simulation experiments as complement to limitations of the real ones. Results: The requirements for the use of the SM in the PT, such as validation and improvement of the elaborated and existent methodologies for determining the SM parameters and effective dose respectively, were determined. Conclusion: The SM realistically simulates the main processes in the PT, and for this reason these can be implemented in this therapy, which are simples, computable and they have other advantages over some current models. It has been determined some negative aspects for some currently used probabilistic models in the RT, like the LKB NTCP and others derived from logistic functions; which can be improved with the proposed methods in this study.

A TCP/IP framework for ethernet-based measurement, control and experiment data distribution

Science.gov (United States)

Ocaya, R. O.; Minny, J.

2010-11-01

A complete modular but scalable TCP/IP based scientific instrument control and data distribution system has been designed and realized. The system features an IEEE 802.3 compliant 10 Mbps Medium Access Controller (MAC) and Physical Layer Device that is suitable for the full-duplex monitoring and control of various physically widespread measurement transducers in the presence of a local network infrastructure. The cumbersomeness of exchanging and synchronizing data between the various transducer units using physical storage media led to the choice of TCP/IP as a logical alternative. The system and methods developed are scalable for broader usage over the Internet. The system comprises a PIC18f2620 and ENC28j60 based hardware and a software component written in C, Java/Javascript and Visual Basic.NET programming languages for event-level monitoring and browser user-interfaces respectively. The system exchanges data with the host network through IPv4 packets requested and received on a HTTP page. It also responds to ICMP echo, UDP and ARP requests through a user selectable integrated DHCP and static IPv4 address allocation scheme. The round-trip time, throughput and polling frequency are estimated and reported. A typical application to temperature monitoring and logging is also presented.

TCP, quantum gravity, the cosmological constant and all that .

International Nuclear Information System (INIS)

Banks, T.

1985-01-01

We study cosmology from the point of view of quantum gravity. Some light is thrown on the nature of time, and it is suggested that the cosmological arrow of time is generated by a spontaneous breakdown of TCP. Conventional cosmological models in which quantum fields interact with a time-dependent gravitational field are shown to describe an approximation to the quantum gravitational wave function which is valid in the long-wavelength limit. Two problems with initial conditions are resolved in models in which a negative bare cosmological constant is cancelled by the classical excitation of a Bose field eta with a very flat potential. These models can also give a natural explanation for the observed value of the cosmological constant. (orig.)

Internet Performance to Africa

Energy Technology Data Exchange (ETDEWEB)

Cottrell, L

2003-10-01

We report the first results ever for real-time Internet performance to Africa using the PingER methodology. Multiple monitoring hosts were used to enable comparisons with performance from different parts of the world. From these preliminary measurements, we have found that Internet packet losses to some African sites in recent months range from very poor to bad (> 12%), some getting better, others are holding steady or getting worse. This, together with the average monthly Round Trip Times, imply end-to-end maximum TCP throughputs that are order of magnitudes different between countries in the region. Africa is shown to be far from the Internet performance in industrialized nations due to the poor infrastructure in place today. These monitoring efforts can provide valuable information to analyze the relative rates of future improvement and today they help us to quantify the digital divide and can provide quantitative information to policy makers.

Performance Analysis of Ivshmem for High-Performance Computing in Virtual Machines

Science.gov (United States)

Ivanovic, Pavle; Richter, Harald

2018-01-01

High-Performance computing (HPC) is rarely accomplished via virtual machines (VMs). In this paper, we present a remake of ivshmem which can change this. Ivshmem was a shared memory (SHM) between virtual machines on the same server, with SHM-access synchronization included, until about 5 years ago when newer versions of Linux and its virtualization library libvirt evolved. We restored that SHM-access synchronization feature because it is indispensable for HPC and made ivshmem runnable with contemporary versions of Linux, libvirt, KVM, QEMU and especially MPICH, which is an implementation of MPI - the standard HPC communication library. Additionally, MPICH was transparently modified by us to get ivshmem included, resulting in a three to ten times performance improvement compared to TCP/IP. Furthermore, we have transparently replaced MPI_PUT, a single-side MPICH communication mechanism, by an own MPI_PUT wrapper. As a result, our ivshmem even surpasses non-virtualized SHM data transfers for block lengths greater than 512 KBytes, showing the benefits of virtualization. All improvements were possible without using SR-IOV.

Sadhana | Indian Academy of Sciences

Indian Academy of Sciences (India)

TCP performs poorly in wireless mobile networks due to large bit error rates. ... TCP, and find considerable improvement in data throughput over wireless links. ... Centre for Electronics Design and Technology, Indian Institute of Science, ...

Trivalent Chromium Process (TCP) as a Sealer for MIL-A-8625F Type II, IIB, and IC Anodic Coatings

National Research Council Canada - National Science Library

Matzdorf, Craig; Beck, Erin; Hilgeman, Amy; Prado, Ruben

2008-01-01

This report documents evaluations of trivalent chromium compositions (TCP) as sealers for MIL-A-8625F Type II, IIB, and IC anodic coatings conducted from March 2001 through December 2007 by Materials Engineering...

Improving fleet performance

International Nuclear Information System (INIS)

Ramjist, S.

2015-01-01

Use Fleet Initiatives to Improve Overall Fleet Performance . Tightly Integrated with Business Planning (Cause & Effect) . Leverage Strength of Broader Organization - Converge on Standard Business Practices . Ancillary Benefit of Improved Agility.

Improving fleet performance

Energy Technology Data Exchange (ETDEWEB)

Ramjist, S. [Ontario Power Generation, Toronto, ON (Canada)

2015-07-01

Use Fleet Initiatives to Improve Overall Fleet Performance . Tightly Integrated with Business Planning (Cause & Effect) . Leverage Strength of Broader Organization - Converge on Standard Business Practices . Ancillary Benefit of Improved Agility.

3D porous architecture of stacks of β-TCP granules compared with that of trabecular bone: a microCT, vector analysis and compression study

Directory of Open Access Journals (Sweden)

Daniel eCHAPPARD

2015-10-01

Full Text Available The 3D arrangement of porous granular biomaterials usable to fill bone defects has received little study. Granular biomaterials occupy 3D space when packed together in a manner that creates a porosity suitable for the invasion of vascular and bone cells. Granules of β-TCP were prepared with either 12.5 or 25g of β-TCP powder in the same volume of slurry. When the granules were placed in a test tube, this produced 3D stacks with a high (HP or low porosity (LP, respectively. Stacks of granules mimic the filling of a bone defect by a surgeon. The aim of this study was to compare the porosity of stacks of β-TCP granules with that of cores of trabecular bone. Biomechanical compression tests were done on the granules stacks. Bone cylinders were prepared from calf tibia plateau, constituted high density (HD blocks. Low density (LD blocks were harvested from aged cadaver tibias. Microcomputed tomography was used on the β-TCP granule stacks and the trabecular bone cores to determine porosity and specific surface. A vector projection algorithm was used to image porosity employing a frontal plane image which was constructed line by line from all images of a microCT stack. Stacks of HP granules had porosity (75.3 ± 0.4% and fractal lacunarity (0.043 ± 0.007 intermediate between that of HD (resp. 69.1 ± 6.4%, p<0.05 and 0.087 ± 0.045, p<0.05 and LD bones (resp. 88.8 ± 1.57% and 0.037 ± 0.014 but exhibited a higher surface density (5.56 ± 0.11 mm2/mm3 vs. 2.06 ± 0.26 for LD, p<0.05. LP granular arrangements created large pores coexisting with dense areas of material. Frontal plane analysis evidenced a more regular arrangement of β-TCP granules than bone trabeculae. Stacks of HP granules represent a scaffold that resembles trabecular bone in its porous microarchitecture.

[Lincomycin applied to the alveolus on TCP carrier and its effect on wound healing after surgical extraction of a third molar].

Science.gov (United States)

Wiśniewska, Izabela; Slósarczyk, Anna; Myśliwiec, Leszek; Sporniak-Tutak, Katarzyna

2009-01-01

The dental surgeon is often confronted by complications particularly after extraction ofunerupted lower third molars. The most common complication is alveolar periostitis. The healing process after extraction is accompanied by physiologic atrophy of the alveolus involving on the average 30% of bone tissue. Beta-tricalcium phosphate (TCP) is a synthetic material used in medicine to fill up bone defects caused by pathologic processes. The properties of TCP are appropriate for the material to be used as a carrier for drugs, in particular antibiotics. This study was undertaken to determine whether lincomycin applied to the alveolus on TCP carrier can be used to accelerate wound healing and reduce inflammation after surgical extraction of a third molar. We enrolled 80 patients (males and females between the age of 18 and 50 years) who underwent extraction of a third molar at the Department of Dental Surgery, Pomeranian Medical University in Szczecin. Surgical difficulty in the patients according to the Pederson scale corresponded to grade 2 or 3 (medium or high difficulty). The study group consisted of 40 patients who received lincomycin on TCP. Beta-tricalcium phosphate (300-700 microm pores) obtained from the Department of Technology of Ceramics and Refractories, AGH University of Science and Technology in Cracow, was soaked with 500 mg of lincomycin in solution and applied to the dental alveolus after tooth extraction. The alveolus was tightly sutured. The control group comprised 40 patients not treated with lincomycin. The patients reappeared for examination on the first, third, and seventh day after surgery. Attention during follow-up was directed to alveolar periostitis, pain, and trismus. Pain intensity was assessed with the 10-degree Visual Analog Scale (VAS). We analyzed the subjective pain intensity reported during follow-up by the patients. In the study group, 20 patients reported no pain 24 hours after extraction. On the third day after surgery, alveolar

Implementasi Protokol Keamanan TLS pada Aplikasi Layanan Komunikasi Suara Melalui Jaringan TCP/IP (VoIP)

OpenAIRE

Hariady, Ricky

2011-01-01

Saat ini layanan komunikasi suara melalui jaringan TCP/IP atau yang lebih dikenal dengan VoIP (Voice over IP) telah semakin banyak digunakan, namun teknologi VoIP yang ada saat ini masih rentan terhadap penyadapan ataupun pencurian data. Sementara protokol kriptografi TLS (Transport Layer Security) telah teruji dan banyak digunakan untuk mengamankan komunikasi melalui internet seperti pada layanan email dan web. Dengan mengimplementasikan protokol TLS pada sebuah aplikasi Vo...

A Comparative Analysis of Transmission Control Protocol Improvement Techniques over Space-Based Transmission Media

National Research Council Canada - National Science Library

Lawson, Joseph M

2006-01-01

The purpose of this study was to assess the throughput improvement afforded by the various TCP optimization techniques, with respect to a simulated geosynchronous satellite system, to provide a cost...

An effector of apple proliferation phytoplasma targets TCP transcription factors-a generalized virulence strategy of phytoplasma?

Science.gov (United States)

Janik, Katrin; Mithöfer, Axel; Raffeiner, Margot; Stellmach, Hagen; Hause, Bettina; Schlink, Katja

2017-04-01

The plant pathogen Candidatus Phytoplasma mali (P. mali) is the causative agent of apple proliferation, a disease of increasing importance in apple-growing areas within Europe. Despite its economic importance, little is known about the molecular mechanisms of disease manifestation within apple trees. In this study, we identified two TCP (TEOSINTE BRANCHED/CYCLOIDEA/PROLIFERATING CELL FACTOR) transcription factors of Malus x domestica as binding partners of the P. mali SAP11-like effector ATP_00189. Phytohormone analyses revealed an effect of P. mali infection on jasmonates, salicylic acid and abscisic acid levels, showing that P. mali affects phytohormonal levels in apple trees, which is in line with the functions of the effector assumed from its binding to TCP transcription factors. To our knowledge, this is the first characterization of the molecular targets of a P. mali effector and thus provides the basis to better understand symptom development and disease progress during apple proliferation. As SAP11 homologues are found in several Phytoplasma species infecting a broad range of different plants, SAP11-like proteins seem to be key players in phytoplasmal infection. © 2016 BSPP AND JOHN WILEY & SONS LTD.

SU-E-T-471: Improvement of Gamma Knife Treatment Planning Through Tumor Control Probability for Metastatic Brain Tumors

Energy Technology Data Exchange (ETDEWEB)

Huang, Z [East Carolina University, Greenville, NC (United States); Feng, Y [East Carolina Univ, Rockville, MD (United States); Lo, S [Case Western Reserve University, Cleveland, OH (United States); Grecula, J [Ohio State University, Columbus, OH (United States); Mayr, N; Yuh, W [University of Washington, Seattle, WA (United States)

2015-06-15

Purpose: The dose–volume histogram (DVH) has been normally accepted as a tool for treatment plan evaluation. However, spatial information is lacking in DVH. As a supplement to the DVH in three-dimensional treatment planning, the differential DVH (DDVH) provides the spatial variation, the size and magnitude of the different dose regions within a region of interest, which can be incorporated into tumor control probability model. This study was to provide a method in evaluating and improving Gamma Knife treatment planning. Methods: 10 patients with brain metastases from different primary tumors including melanoma (#1,#4,#5, #10), breast cancer (#2), prostate cancer (#3) and lung cancer (#6–9) were analyzed. By using Leksell GammaPlan software, two plans were prepared for each patient. Special attention was given to the DDVHs that were different for different plans and were used for a comparison between two plans. Dose distribution inside target and tumor control probability (TCP) based on DDVH were calculated, where cell density and radiobiological parameters were adopted from literature. The plans were compared based on DVH, DDVH and TCP. Results: Using DVH, the coverage and selectivity were the same between plans for 10 patients. DDVH were different between two plans for each patient. The paired t-test showed no significant difference in TCP between the two plans. For brain metastases from melanoma (#1, #4–5), breast cancer (#2) and lung cancer (#6–8), the difference in TCP was less than 5%. But the difference in TCP was about 6.5% for patient #3 with the metastasis from prostate cancer, 10.1% and 178.7% for two patients (#9–10) with metastasis from lung cancer. Conclusion: Although DVH provides average dose–volume information, DDVH provides differential dose– volume information with respect to different regions inside the tumor. TCP provides radiobiological information and adds additional information on improving treatment planning as well as adaptive

SU-E-T-471: Improvement of Gamma Knife Treatment Planning Through Tumor Control Probability for Metastatic Brain Tumors

International Nuclear Information System (INIS)

Huang, Z; Feng, Y; Lo, S; Grecula, J; Mayr, N; Yuh, W

2015-01-01

Purpose: The dose–volume histogram (DVH) has been normally accepted as a tool for treatment plan evaluation. However, spatial information is lacking in DVH. As a supplement to the DVH in three-dimensional treatment planning, the differential DVH (DDVH) provides the spatial variation, the size and magnitude of the different dose regions within a region of interest, which can be incorporated into tumor control probability model. This study was to provide a method in evaluating and improving Gamma Knife treatment planning. Methods: 10 patients with brain metastases from different primary tumors including melanoma (#1,#4,#5, #10), breast cancer (#2), prostate cancer (#3) and lung cancer (#6–9) were analyzed. By using Leksell GammaPlan software, two plans were prepared for each patient. Special attention was given to the DDVHs that were different for different plans and were used for a comparison between two plans. Dose distribution inside target and tumor control probability (TCP) based on DDVH were calculated, where cell density and radiobiological parameters were adopted from literature. The plans were compared based on DVH, DDVH and TCP. Results: Using DVH, the coverage and selectivity were the same between plans for 10 patients. DDVH were different between two plans for each patient. The paired t-test showed no significant difference in TCP between the two plans. For brain metastases from melanoma (#1, #4–5), breast cancer (#2) and lung cancer (#6–8), the difference in TCP was less than 5%. But the difference in TCP was about 6.5% for patient #3 with the metastasis from prostate cancer, 10.1% and 178.7% for two patients (#9–10) with metastasis from lung cancer. Conclusion: Although DVH provides average dose–volume information, DDVH provides differential dose– volume information with respect to different regions inside the tumor. TCP provides radiobiological information and adds additional information on improving treatment planning as well as adaptive

Carbothermic Reduction Kinetics of Phosphorous Vaporization from Tri-calcium Phosphate (TCP) Under Microwave Rapid Heating With/Without the Presence of Fe3O4

Science.gov (United States)

Yoshikawa, Noboru; Sunako, Manami; Kawahira, Keita; Suzuki, Koki; Miyamoto, Kazunori; Taniguchi, Shoji

2018-06-01

The kinetics of vapor phase dephosphorization from tri-calcium phosphate (TCP) by carbothermic reduction was studied with and without the presence of Fe3O4. Microwave heating was utilized to obtain large variations in the heating rate (HR). In the reduction of TCP alone, the phosphorous removal fraction (RF; equal to ΔP2O5/P2O 5 0 , where ΔP2O5 is the weight change and P2O 5 0 is the P2O5 weight before heating) decreased as the HR increased. In other words, a shorter residence time at a high temperature resulted in a smaller reduction fraction of TCP. An apparently third-order reaction was postulated to account for the kinetics using a fitting simulation based on the additive law of the reaction progress. On the other hand, the phosphorous removal (dephosphorization) rate (RR; equal to ΔP2O3/ t MW, where tMW is the microwave heating time period) increased as the HR increased above 1200 °C. The reduction ratio of Fe3O4 above 1100 °C is higher than 97 pct regardless of the heating rate. The reduction of TCP in the presence of Fe3O4 showed that RF increased slightly with increasing HR despite a shorter residence time at a high temperature. The RR also increased with the HR even though RF decreased to half of the values observed in the cases without Fe3O4 for temperatures above 1200 °C. The practicality and optimal operation conditions of phosphorus vapor removal were discussed.

Carbothermic Reduction Kinetics of Phosphorous Vaporization from Tri-calcium Phosphate (TCP) Under Microwave Rapid Heating With/Without the Presence of Fe3O4

Science.gov (United States)

Yoshikawa, Noboru; Sunako, Manami; Kawahira, Keita; Suzuki, Koki; Miyamoto, Kazunori; Taniguchi, Shoji

2018-03-01

The kinetics of vapor phase dephosphorization from tri-calcium phosphate (TCP) by carbothermic reduction was studied with and without the presence of Fe3O4. Microwave heating was utilized to obtain large variations in the heating rate (HR). In the reduction of TCP alone, the phosphorous removal fraction (RF; equal to ΔP2O5/P2O5 0 , where ΔP2O5 is the weight change and P2O5 0is the P2O5 weight before heating) decreased as the HR increased. In other words, a shorter residence time at a high temperature resulted in a smaller reduction fraction of TCP. An apparently third-order reaction was postulated to account for the kinetics using a fitting simulation based on the additive law of the reaction progress. On the other hand, the phosphorous removal (dephosphorization) rate (RR; equal to ΔP2O3/t MW, where tMW is the microwave heating time period) increased as the HR increased above 1200 °C. The reduction ratio of Fe3O4 above 1100 °C is higher than 97 pct regardless of the heating rate. The reduction of TCP in the presence of Fe3O4 showed that RF increased slightly with increasing HR despite a shorter residence time at a high temperature. The RR also increased with the HR even though RF decreased to half of the values observed in the cases without Fe3O4 for temperatures above 1200 °C. The practicality and optimal operation conditions of phosphorus vapor removal were discussed.

Physicomechanical, In Vitro and In Vivo Performance of 3D Printed Doped Tricalcium Phosphate Scaffolds for Bone Tissue Engineering and Drug Delivery

Science.gov (United States)

Tarafder, Solaiman

Although tricalcium phosphate (TCP) is widely used in bone tissue engineering, the strength degradation kinetics is not well controlled. This study focuses on the underlying mechanism of strength degradation kinetics by incorporating trace elements in TCP. The objective of this research is to modify the mechanical properties of TCP to achieve the desired degradation rate for the specific need, and improve the in vivo bioactivity for early wound healing by incorporating trace elements such as strontium (Sr2+), magnesium (Mg2+) and silicon (Si4+) as dopants. The hypothesis of this research is that the presence of different trace elements in TCP will influence its phase stability, microstructure, mechanical strength, and both in vitro and in vivo bioactivity. Direct three dimensional printing (3DP) was used to fabricate designed interconnected macroporous pure and doped TCP scaffolds. Microwave sintering as opposed to conventional sintering was also used for better densification and higher mechanical strength. A maximum compressive strength of 10.95 +/- 1.28 MPa and 12.01 +/- 1.56 MPa were achieved for pure and Sr2+-Mg2+ doped TCP scaffolds with 500 microm designed pores (˜400 microm after sintering) sintered in microwave furnace, respectively. Substitution of Mg2+ and Sr2+ into calcium (Ca2+) sites of TCP crystal lattice contributed to phase stability and controlled gradual degradation. On the other hand, Si4+ substitution into phosphorous (P5+) sites destabilized the crystal structure and accelerated degradation of TCP. Interconnected macroporous beta-TCP scaffolds facilitated in vivo guided bone tissue regeneration through infiltration of cells and extracellular matrix into the designed pores. Presence of Sr2+, Mg2+ and Si4+ into beta-TCP induced increased in vivo early bone formation and better bone remodeling through increased extracellular matrix production such as, collagen and osteocalcin, when tested in rat and rabbit distal femur model. The presence of Si4

Bone regeneration of critical calvarial defect in goat model by PLGA/TCP/rhBMP-2 scaffolds prepared by low-temperature rapid-prototyping technology.

Science.gov (United States)

Yu, D; Li, Q; Mu, X; Chang, T; Xiong, Z

2008-10-01

Active artificial bone composed of poly lactide-co-glycolide (PLGA)/ tricalcium phosphate (TCP) was prefabricated using low-temperature rapid-prototyping technology so that the process of osteogenesis could be observed in it. PLGA and TCP were the primary materials, they were molded at low temperature, then recombinant human bone morphogenetic protein-2 (rhBMP-2) was added to form an active artificial bone. Goats with standard cranial defects were randomly divided into experimental (implants with rhBMP-2 added) and control (implants without rhBMP-2) groups, and osteogenesis was observed and evaluated by imaging and biomechanical and histological examinations. The PLGA-TCP artificial bone scaffold (90% porosity) had large and small pores of approximately 360microm and 3-5microm diameter. Preliminary and complete repair of the cranial defect in the goats occurred 12 and 24 weeks after surgery, respectively. The three-point bending strength of the repaired defects attained that of the normal cranium. In conclusion, low-temperature rapid-prototyping technology can preserve the biological activity of this scaffold material. The scaffold has a good three-dimensional structure and it becomes an active artificial bone after loading with rhBMP-2 with a modest degradation rate and excellent osteogenesis in the goat.

Parallel evolution of TCP and B-class genes in Commelinaceae flower bilateral symmetry

Directory of Open Access Journals (Sweden)

Preston Jill C

2012-03-01

Full Text Available Abstract Background Flower bilateral symmetry (zygomorphy has evolved multiple times independently across angiosperms and is correlated with increased pollinator specialization and speciation rates. Functional and expression analyses in distantly related core eudicots and monocots implicate independent recruitment of class II TCP genes in the evolution of flower bilateral symmetry. Furthermore, available evidence suggests that monocot flower bilateral symmetry might also have evolved through changes in B-class homeotic MADS-box gene function. Methods In order to test the non-exclusive hypotheses that changes in TCP and B-class gene developmental function underlie flower symmetry evolution in the monocot family Commelinaceae, we compared expression patterns of teosinte branched1 (TB1-like, DEFICIENS (DEF-like, and GLOBOSA (GLO-like genes in morphologically distinct bilaterally symmetrical flowers of Commelina communis and Commelina dianthifolia, and radially symmetrical flowers of Tradescantia pallida. Results Expression data demonstrate that TB1-like genes are asymmetrically expressed in tepals of bilaterally symmetrical Commelina, but not radially symmetrical Tradescantia, flowers. Furthermore, DEF-like genes are expressed in showy inner tepals, staminodes and stamens of all three species, but not in the distinct outer tepal-like ventral inner tepals of C. communis. Conclusions Together with other studies, these data suggest parallel recruitment of TB1-like genes in the independent evolution of flower bilateral symmetry at early stages of Commelina flower development, and the later stage homeotic transformation of C. communis inner tepals into outer tepals through the loss of DEF-like gene expression.

Evaluation of the biotissue of PCL and β-TCP

International Nuclear Information System (INIS)

Solomao, Zenaide; Zavaglia, Cecilia A.C.

2011-01-01

The use of biomaterials to replace, repair injured tissues and organs of human beings has increased due to population growth and its higher life expectancy. The tissue engineering is an interdisciplinary field that integrates principles of biology, chemistry, genetics, materials science and biomedical engineering, to produce composite three-dimensional, capable of replacing biological tissues. The development of new biomaterials using the method of evaporation of the solvent can help to solvent this problem. This work aimed to characterized the membranes of poly (ε-caprolactone) dense and porous (scaffolds) of PCL/B-TCP; and make an in vitro evaluation. Techniques were used to: SEM, EDS, XRD, TGA, DSC, mechanical traction tests, test cell viability and activity of alkaline phosphatase (ALP). The hydrolytic degradation was analyzed in phosphate buffer (PBS) and the biocompatibility through standards (ASTM and ABNT) concluding that the materials are biocompatible and are used with great potential for replacement of the bone tissue. (author)

Influence of different naf concentration on the mechanical and morphological properties on sintered β-TCP; Estudo das propriedades mecanicas e morfologicas de [Beta]-fosfato tricalcico sinterizado com a adicao de diferentes concentracoes de NaF

Energy Technology Data Exchange (ETDEWEB)

Saito, L.; Cardoso, H.A.I.; Zavaglia, C.A.C., E-mail: liasaito89@gmail.com [Universidade Estadual de Campinas (LABIOMEC/UNICAMP), SP (Brazil); Motisuke, M. [Universidade Federal de Sao Paulo (UNIFESP), SP (Brazil)

2011-07-01

Among the bioceramics, [beta]-tricalcium phosphate, β-TCP, is currently used in biomedical applications due to its in vivo reabsorption and chemical composition, important for bone formation and repair. Researchers showed that the addition of sodium fluoride (NaF) up to 2wt.% increases β-TCP mechanical properties without altering its biocompatibility and bioactivity. In this work, the effect of different NaF concentrations (2wt.% to 5wt.%) on β-TCP properties was studied. The samples were sintered at 1250 deg C during four hours. Afterwards, it were determined its mechanical resistance, density, morphology and chemical composition as a function of NaF content. The results showed that the presence of NaF does not lead to an increase on the mechanical properties. This fact is probably related to the formation of a mixture of TCP, apatite and sodium and calcium phosphates; and a visible increase on samples' density.(author)

Proyecto Grannacional ALBASALUD para Centro Regulador de Medicamentos Esenciales de los países del ALBA-TCP Grand-national Project ALBASALUD for Regulatory Center of Essential Drugs for the ALBA-TCP countries

Directory of Open Access Journals (Sweden)

Celeste Aurora Sánchez González

2011-09-01

Full Text Available La Autoridad Reguladora de Medicamentos de Cuba, coordina un Proyecto de la Alianza Bolivariana para los pueblos de América-Tratado de Libre Comercio (ALBA-TCP, dirigido al desarrollo de un Centro Regulador para los países del ALBA como nuevo organismo regional de integración farmacéutica, en aras de contar con un Registro Grannacional válido en todos los países partes, como herramienta para facilitar el acceso a medicamentos esenciales de calidad. Esta investigación tuvo como objetivo diseñar y conducir desde el punto de vista técnico un proyecto para crear las bases legales y metodológicas del futuro centro y sus funciones básicas. Se emplearon técnicas de grupo nominal, puntos de referencia, consultas a expertos y se crearon metodologías específicas para planear y confeccionar los documentos necesarios. Se utilizaron lineamientos de organismos reguladores internacionales, cuadros básicos de medicamentos y reglamentación farmacéutica de los países participantes. Se desarrollaron y aplicaron documentos y estrategias para el trabajo del proyecto durante la etapa de preinversión, se definió el primer listado de medicamentos esenciales del ALBA y se aprobaron las fundamentales disposiciones legales y la reglamentación para las funciones de registro, vigilancia, inspecciones, laboratorios y liberación de lotes. El Proyecto Grannacional ALBASALUD "Centro Regulador de Medicamentos del ALBA-TCP" aplicado ha demostrado su eficiencia y capacidad para alcanzar los objetivos trazados mediante un trabajo científico-técnico con participación colectiva, que ha garantizado las disposiciones y lineamientos requeridos para sus funciones básicas y respaldo legal.The Drug Regulatory Authority of Cuba is coordinating a Project of the Bolivarian Alliance for the Peoples of America- Free Trade Agreement (ALBA-TCP aimed at developing a Regulatory Center that will operate as a new regional body of pharmaceutical integration for the ALBA

Can training improve human performance

International Nuclear Information System (INIS)

Waylett, W.J. Jr.

1986-01-01

The nuclear industry has made a significant commitment to improve training through the implementation of performance-based training programs. Senior management expects that human performance improvement will result from this significant resource allocation. The author examines this hypothesis and discusses other issues that may interfere with enhancing human performance through training. The integration of quality improvement concepts to support training is also discussed by the author, who was a pioneer facilitator during the development of Florida Power and Light Company's Quality Improvement Program. Critical success factors are proposed based on the author's experience as a plant manager, training manager and quality facilitator

Preclinical evaluation of technetium 99m-labeled P1827DS for infection imaging and comparison with technetium 99m IL-8

International Nuclear Information System (INIS)

Krause, Sabine; Rennen, Huub J.; Boerman, Otto C.; Baumann, Sabine; Cyr, John E.; Manchanda, Rajesh; Lister-James, John; Corstens, Frans C.; Dinkelborg, Ludger M.

2007-01-01

Background: The technetium 99 m ( 99m Tc)-radiolabeled, leukocyte-avid peptide-glycoseaminoglycan complex, [ 99m Tc]P1827DS, has been synthesized as an improved infection/inflammation imaging agent to [ 99m Tc]P483H (LeukoTect, Diatide). In a phase I/II clinical trail, [ 99m Tc]P483H images were equivalent to those obtained with 111 In ex vivo labeled leukocytes. However, there was physiologic accumulation of radioactivity in the body that could hamper interpretation of the images. In this study, the potential of [ 99m Tc]P1827DS for infection imaging was assessed in comparison with [ 99m Tc]P483H and the well-described imaging agent [ 99m Tc] hydrazinonicotinamide (HYNIC)-interleukin 8 (IL-8). Methods: The binding of [ 99m Tc]P1827DS to human blood cell was studied in vitro. A rabbit Escherichia coli infection model was used to perform the biodistribution and imaging studies with [ 99m Tc]P1827DS, [ 99m Tc]P483H and [ 99m Tc]HYNIC-IL-8. Results: [ 99m Tc]P1827DS binds to leukocytes but not to erythrocytes. The leukocyte binding was not saturable up to an investigated concentration of 10 μM. The accumulation of [ 99m Tc]P1827/DS at the infection site strongly depends on the P1827/DS ratio and was optimal at a molar ratio of 10:1. [ 99m Tc]P1827DS shows improved biodistribution over [ 99m Tc]P483H with similar uptake at the infection site. Abscess uptake of [ 99m Tc]HYNIC-IL-8 was approximately three times higher than that of [ 99m Tc]P1827DS. [ 99m Tc]HYNIC-IL-8 showed high accumulation in the kidneys, whereas [ 99m Tc]P1827DS showed high lung uptake and slightly higher accumulation in the liver and spleen. Conclusion: [ 99m Tc]P1827DS is a potential new inflammation imaging agent, which clearly visualized the abscess in the rabbit E. coli infection model and showed improved biodistribution compared to [ 99m Tc]P483H. However, the infection uptake and biodistribution of [ 99m Tc]P1827DS is not superior to that of [ 99m Tc]HYNIC-IL-8 in this animal model

Optical Spectroscopy of TCP J04432130+4721280 (V392 Per) Confirms a Nova Eruption

Science.gov (United States)

Wagner, R. M.; Terndrup, D.; Darnley, M. J.; Starrfield, S.; Woodward, C. E.; Henze, M.

2018-04-01

Following reports of a new transient of magnitude 6.2 in Perseus on 2018 April 29.4740 UT discovered by Y. Nakamura designated TCP J04432130+4721280 (http://www.cbat.eps.harvard.edu/unconf/followups/J04432130+4721280.html) and positionally coincident with the previously known U Gem type dwarf nova V392 Per, we obtained an optical spectrum on 2018 April 30.116 UT (range: 396-687 nm; resolution 0.3 nm) with the 2.4 m Hiltner telescope (+OSMOS) of the MDM Observatory on Kitt Peak.

Java parallel secure stream for grid computing

International Nuclear Information System (INIS)

Chen, J.; Akers, W.; Chen, Y.; Watson, W.

2001-01-01

The emergence of high speed wide area networks makes grid computing a reality. However grid applications that need reliable data transfer still have difficulties to achieve optimal TCP performance due to network tuning of TCP window size to improve the bandwidth and to reduce latency on a high speed wide area network. The authors present a pure Java package called JPARSS (Java Parallel Secure Stream) that divides data into partitions that are sent over several parallel Java streams simultaneously and allows Java or Web applications to achieve optimal TCP performance in a gird environment without the necessity of tuning the TCP window size. Several experimental results are provided to show that using parallel stream is more effective than tuning TCP window size. In addition X.509 certificate based single sign-on mechanism and SSL based connection establishment are integrated into this package. Finally a few applications using this package will be discussed

Experimental Evaluation of TCP-Based DTN for Cislunar Communications in Presence of Long Link Disruption

Directory of Open Access Journals (Sweden)

Zhang Zhensheng

2011-01-01

Full Text Available Delay/disruption tolerant networking (DTN technology is considered a new solution to highly stressed communications in space environments. To date, little work has been done in evaluating the effectiveness and performance of the available DTN protocols when they are applied to an interplanetary Internet, especially in presence of a long link disruption. In this paper, we present an experimental investigation of the DTN architecture with a Bundle Protocol (BP running over TCP-based convergence layer (TCPCL protocol in a simulated cislunar communication environment characterized by a long link disruption. The intent of this work is to investigate the effectiveness of the TCPCL-based DTN protocol in coping with long link disruptions, through realistic file transfer experiments using a PC-based test-bed. The experiment results show that the DTN protocol is effective in handling a long link disruption experienced in data transmission accompanied by a cislunar link delay and a high BER. The performance of the DTN is most adversely affected by link disruption time in comparison to the effect of link delay and BER. For the transmissions with a very long link disruption of hours, the variations in goodput are nominal with respect to the change in cislunar link delay.

Improvement of sheep skin quality after treatment with diazinon ...

African Journals Online (AJOL)

Cockle, otherwise known as ekek locally, has been economically the most important skin defect among the tanneries in Ethiopia for the last three decades. The disease has been experimented on since 1996 when FAO sponsored the trials on sheep and goat skin improvement trial (TCP/ETH/4558&6712) and found that ...

Use of Ethernet and TCP/IP socket communications library routines for data acquisition and control in the LEP RF system

International Nuclear Information System (INIS)

Ciapala, E.; Collier, P.; Lienard, P.

1991-01-01

A general move is being made at CERN towards the direct connection of intelligent equipment and device controllers to the control room consoles by the use of local Ethernet segments bridged to the main Token Ring networks. Communications is based on standard TCP/IP protocols which allows immediate use of standard software packages. The Data Managers which control the LEP RF accelerating units and transverse feedback systems have recently been connected. The implementation of Ethernet and TCP/IP socket communications routines for RF data acquisition and control is described. The adaptation of almost all of the existing software for RF system control, data acquisition and diagnostics to make use of this means of communication has proved straightforward. Furthermore the transparent transfer of data in the form of 'C' structures from the Data Managers to the control center workstations and other computers has considerably simplified the software required for remote surveillance and data logging with a corresponding increase in speed and reliability

Performance improvement: the organization's quest.

Science.gov (United States)

McKinley, C O; Parmer, D E; Saint-Amand, R A; Harbin, C B; Roulston, J C; Ellis, R A; Buchanan, J R; Leonard, R B

1999-01-01

In today's health care marketplace, quality has become an expectation. Stakeholders are demanding quality clinical outcomes, and accrediting bodies are requiring clinical performance data. The Roosevelt Institute's quest was to define and quantify quality outcomes, develop an organizational culture of performance improvement, and ensure customer satisfaction. Several of the organization's leaders volunteered to work as a team to develop a specific performance improvement approach tailored to the organization. To date, over 200 employees have received an orientation to the model and its philosophy and nine problem action and process improvement teams have been formed.

Improving Service Management in the Internet of Things

Science.gov (United States)

Sammarco, Chiara; Iera, Antonio

2012-01-01

In the Internet of Things (IoT) research arena, many efforts are devoted to adapt the existing IP standards to emerging IoT nodes. This is the direction followed by three Internet Engineering Task Force (IETF) Working Groups, which paved the way for research on IP-based constrained networks. Through a simplification of the whole TCP/IP stack, resource constrained nodes become direct interlocutors of application level entities in every point of the network. In this paper we analyze some side effects of this solution, when in the presence of large amounts of data to transmit. In particular, we conduct a performance analysis of the Constrained Application Protocol (CoAP), a widely accepted web transfer protocol for the Internet of Things, and propose a service management enhancement that improves the exploitation of the network and node resources. This is specifically thought for constrained nodes in the abovementioned conditions and proves to be able to significantly improve the node energetic performance when in the presence of large resource representations (hence, large data transmissions).

Hypo-fractionated treatment in radiotherapy: radio-biological models Tcp and NTCP

International Nuclear Information System (INIS)

Astudillo V, A. J.; Mitsoura, E.; Paredes G, L.; Resendiz G, G.

2014-08-01

At the present time the breast cancer in Mexico has the first place of incidence of the malignant neoplasia s in the women, and represents 11.34% of all the cancer cases. On the other hand, the treatments for cancer by means of ionizing radiations have been dominated under the approaches of the medical radio-oncologists which have been based on test and error by many years. The radio-biological models, as the Tcp, NTCP and dosimetric variables, for their clinical application in the conventional radiotherapy with hypo-fractionation have as purpose predicting personalized treatment plans that they present most probability of tumor control and minor probability of late reactions, becoming this way support tools in the decisions taking for the patient treatments planning of Medical Physicists and Radio-oncologists. (Author)

Uso de novos materiais para o capeamento pulpar (hidroxiapatita - HAp e fosfato tricálcico - β-TCP The use of new materials for pulp capping (hydroxyapatite - HAp and tricalcium phosphate - β-TCP

Directory of Open Access Journals (Sweden)

C. S. Delfino

2010-12-01

Full Text Available O capeamento pulpar é uma medida importante e muito usada no cotidiano da prática odontológica e, quando realizado de forma consciente, baseado em um bom diagnóstico da condição pulpar no momento da exposição, pode prevenir o dente de sofrer uma intervenção endodôntica. Além do hidróxido de cálcio, outros materiais vêm sendo testados quanto a sua ação em promover o reparo pulpar pela formação de ponte de dentina, após capeamento pulpar direto. Uma das alternativas de materiais viáveis para o capeamento pulpar são as cerâmicas à base de fosfatos de cálcio, destacando-se a hidroxiapatita (HAp e o fosfato tricálcico (β-TCP. Estes materiais não promovem a formação de área necrótica, característica da utilização do hidróxido de cálcio, são biocompatíveis e favorecem o reparo do tecido pulpar. Para avaliar os efeitos desses materiais no capeamento pulpar foi realizada esta revisão de literatura, abordando desde a resposta do tecido pulpar, até o protocolo para o uso clínico.Pulp capping is an important measure and one with a high rate of use in daily dental practice, and when it is conscientiously performed, based on good diagnosis of the pulp condition at the time of its exposure, it may prevent the tooth from requiring endodontic intervention. In addition to calcium hydroxide, other materials have been tested with regard to their action in promoting pulp repair by the formation of a dentin bridge after direct pulp capping. Some of the feasible alternative materials for pulp capping are calcium phosphate-based ceramics, with hydroxyapatite (HAp and tricalcium phosphate (β-TCP being outstanding. These materials do not promote formation of a necrotic area, characteristic of the use of calcium hydroxide, are biocompatible and favor pulp tissue repair. To evaluate the effects of these materials on pulp capping, this literature review was conducted, the approach being wide ranging in scope, from pulp response

Improved performance of the industry

International Nuclear Information System (INIS)

Jeffrey, R.

1994-01-01

The remarkable improvements in the performance of AGR stations is illustrated. The underlying reasons for this improvement are discussed, emphasizing both the operational performance factors which have led to higher sustained output and the managerial and cultural changes which have focused attention at all levels on the need to be competitive. It is concluded that the UK nuclear industry has become world class with more improvements to come, an asset to the UK. (Author)

Performance improvement - business excellence processes

International Nuclear Information System (INIS)

Doucett, J.

2010-01-01

This presentation discusses Performance Improvement which is defined as 'the process of identifying and analyzing important organizational and individual performance gaps, planning for future performance improvement, designing and developing cost-effective and ethically justifiable intervention to close performance gaps, implementing the interventions and evaluating the financial and non-financial results', i.e. making things better. Specifically, it discusses the refurbishment outage at the Point Lepreau Power Plant that began at the end of March 2008. The business risks identified in 2008 were leadership, demographics and management system.

Performance improvement - business excellence processes

Energy Technology Data Exchange (ETDEWEB)

Doucett, J. [NB Nuclear Power, Point Lepreau, New Brunswick (Canada)

2010-07-01

This presentation discusses Performance Improvement which is defined as 'the process of identifying and analyzing important organizational and individual performance gaps, planning for future performance improvement, designing and developing cost-effective and ethically justifiable intervention to close performance gaps, implementing the interventions and evaluating the financial and non-financial results', i.e. making things better. Specifically, it discusses the refurbishment outage at the Point Lepreau Power Plant that began at the end of March 2008. The business risks identified in 2008 were leadership, demographics and management system.

Efficacy of rhBMP-2 loaded PCL/PLGA/β-TCP guided bone regeneration membrane fabricated by 3D printing technology for reconstruction of calvaria defects in rabbit

International Nuclear Information System (INIS)

Shim, Jin-Hyung; Jeong, Chang-Mo; Huh, Jung-Bo; Jang, Jinah; Jeong, Sung-In; Cho, Dong-Woo; Yoon, Min-Chul

2014-01-01

We successfully fabricated a three-dimensional (3D) printing-based PCL/PLGA/β-TCP guided bone regeneration (GBR) membrane that slowly released rhBMP-2. To impregnate the GBR membrane with intact rhBMP-2, collagen solution encapsulating rhBMP-2 (5 µg ml −1 ) was infused into pores of a PCL/PLGA/β-TCP membrane constructed using a 3D printing system with four dispensing heads. In a release profile test, sustained release of rhBMP-2 was observed for up to 28 d. To investigate the efficacy of the GBR membrane on bone regeneration, PCL/PLGA/β-TCP membranes with or without rhBMP-2 were implanted in an 8 mm calvaria defect of rabbits. Bone formation was evaluated at weeks 4 and 8 histologically and histomorphometrically. A space making ability of the GBR membrane was successfully maintained in both groups, and significantly more new bone was formed at post-implantation weeks 4 and 8 by rhBMP-2 loaded GBR membranes. Interestingly, implantation with rhBMP-2 loaded GBR membranes led to almost entire healing of calvaria defects within 8 weeks. (paper)

Network coding at different layers in wireless networks

CERN Document Server

2016-01-01

This book focuses on how to apply network coding at different layers in wireless networks – including MAC, routing, and TCP – with special focus on cognitive radio networks. It discusses how to select parameters in network coding (e.g., coding field, number of packets involved, and redundant information ration) in order to be suitable for the varying wireless environments. The book explores how to deploy network coding in MAC to improve network performance and examines joint network coding with opportunistic routing to improve the successful rate of routing. In regards to TCP and network coding, the text considers transport layer protocol working with network coding to overcome the transmission error rate, particularly with how to use the ACK feedback of TCP to enhance the efficiency of network coding. The book pertains to researchers and postgraduate students, especially whose interests are in opportunistic routing and TCP in cognitive radio networks.

Análise de estado de tráfego de redes TCP/IP para aplicação em detecção de intrusão

OpenAIRE

Marcelo Henrique Peixoto Caetano Chaves

2002-01-01

Este trabalho apresenta o desenvolvimento de uma metodologia de reconstrução de sessões para o tráfego de redes TCP/IP. Esta metodologia baseia-se em um modelo, gerado a partir de dados extraídos do tráfego de rede, que permite reconstruir e rastrear o estado das sess~oes, utilizando apenas o cabe calho dos pacotes. Através da extrapolação do conceito de "sessão", esta modelagem permite não são reconstruir e rastrear o estado das sessões TCP, mas também reconstruir sessões ICMP e UDP. O model...

Improve strategic supplier performance using DMAIC to develop a Quality Improvement Plan

Science.gov (United States)

Jardim, Kevin P.

Supplier performance that meets the requirements of the customer has long plagued quality professionals. Despite the vast efforts by organizations to improve supplier performance, little has been done to standardize the plan to improve performance. This project presents a guideline and problem-solving strategy using a Define, Measure, Analyze, Improve, and Control (DMAIC) structured tool that will assist in the management and improvement of supplier performance. An analysis of benchmarked Quality Improvement Plans indicated that this topic needs more focus on how to accomplish improved supplier performance. This project is part of a growing body of supplier continuous improvement efforts. With the input of Zodiac Aerospace quality professionals this project's results provide a solution to Quality Improvement Plans and show objective evidence of its benefits. This project contributes to the future research on similar topics.

Synthesis and characterization of injectable composites of poly[D,L-lactide-co-(ε-caprolactone)] reinforced with β-TCP and CaCO3 for intervertebral disk augmentation.

Science.gov (United States)

López, Alejandro; Persson, Cecilia; Hilborn, Jöns; Engqvist, Håkan

2010-10-01

Degeneration of the intervertebral disk constitutes one of the major causes of low back pain in adults aged 20-50 years old. In this study, injectable, in situ setting, degradable composites aimed for intervertebral disk replacement were prepared. β-TCP and calcium carbonate particles were mixed into acrylic-terminated oligo[D,L-lactide-co-(ε-caprolactone)], which were crosslinked at room temperature. The structure of the oligomers was confirmed by 1H-NMR spectroscopy. The composites were examined via SEM, and the mechanical properties of the crosslinked networks were determined. The porous β-TCP particles showed good mechanical anchorage to the matrix due to polymer penetration into the pores. In vitro degradation tests showed that the composites containing β-TCP slowly degraded, whereas the composites containing CaCO3 exhibited apatite formation capacity. It was concluded that the surface area, morphology, and solubility of the fillers might be used to control the degradation properties. The incorporation of fillers also increased both the elastic modulus and the maximum compression strength of the composites, properties that were similar to those of the physiological disk. These materials have potential for long-term intervertebral disk replacement and regenerative scaffolds because of their low degradation rates, bioactivity, and mechanical properties.

A novel germ cell protein, SPIF (sperm PKA interacting factor), is essential for the formation of a PKA/TCP11 complex that undergoes conformational and phosphorylation changes upon capacitation.

Science.gov (United States)

Stanger, Simone J; Law, Estelle A; Jamsai, Duangporn; O'Bryan, Moira K; Nixon, Brett; McLaughlin, Eileen A; Aitken, R John; Roman, Shaun D

2016-08-01

Spermatozoa require the process of capacitation to enable them to fertilize an egg. PKA is crucial to capacitation and the development of hyperactivated motility. Sperm PKA is activated by cAMP generated by the germ cell-enriched adenylyl cyclase encoded by Adcy10 Male mice lacking Adcy10 are sterile, because their spermatozoa are immotile. The current study was designed to identify binding partners of the sperm-specific (Cα2) catalytic subunit of PKA (PRKACA) by using it as the "bait" in a yeast 2-hybrid system. This approach was used to identify a novel germ cell-enriched protein, sperm PKA interacting factor (SPIF), in 25% of the positive clones. Homozygous Spif-null mice were embryonically lethal. SPIF was coexpressed and coregulated with PRKACA and with t-complex protein (TCP)-11, a protein associated with PKA signaling. We established that these 3 proteins form part of a novel complex in mouse spermatozoa. Upon capacitation, the SPIF protein becomes tyrosine phosphorylated in >95% of sperm. An apparent molecular rearrangement in the complex occurs, bringing PRKACA and TCP11 into proximity. Taken together, these results suggest a role for the novel complex of SPIF, PRKACA, and TCP11 during sperm capacitation, fertilization, and embryogenesis.-Stanger, S. J., Law, E. A., Jamsai, D., O'Bryan, M. K., Nixon, B., McLaughlin, E. A., Aitken, R. J., Roman, S. D. A novel germ cell protein, SPIF (sperm PKA interacting factor), is essential for the formation of a PKA/TCP11 complex that undergoes conformational and phosphorylation changes upon capacitation. © FASEB.

Microcapsule-based techniques for improving the safety of lithium-ion batteries

Science.gov (United States)

Baginska, Marta

developed to simulate an overheating condition while the cell is cycling. Experimental protocols are developed to assess the performance of the separator in terms of its ability to perform autonomic shutdown and examine tested battery materials using scanning electron microscopy. Another approach to improving battery functionality is via the microencapsulation of battery additives. Currently, additives are added directly into a battery electrolyte, and while they typically perform their function given a sufficient loading, these additives often do so at the expense of battery performance. Microencapsulation allows for a high loading of additives to be incorporated into the cell and their release triggered only when and where they are needed. In this work, microencapsulation techniques are developed to successfully encapsulate 3-hexylthiophene, a stabilizing agent for high-voltage cathodes in Li-ion batteries and conductive polymer precursor, as well as the flame retardant Tris(2-choloroethyl phosphate) (TCP). Microcapsules containing 3-hexylthiophene are coated onto model battery electrodes and immersed in electrolyte. The microcapsule shell wall insulates the 3-hexylthiophene until the microcapsules are mechanically crushed and electropolymerization of the released core to form poly(3-ht) occurs under cyclic voltammetry. In addition, TCP was encapsulated using in situ polymerization. TCP-containing microcapsules are stable in electrolyte at room temperature, but are thermally triggered to release their payload at elevated temperatures. Experimental protocols are developed to study the in situ triggering and release of microencapsulated additives.

SU-F-T-686: Considerations About Dose Protraction Factor in TCP Calculations for Prostate VMAT Treatments

Energy Technology Data Exchange (ETDEWEB)

Clemente, F; Perez-Vara, C; Clavo, M [Herranz Hospital Central de la Defensa “Gomez Ulla”, Madrid (Spain)

2016-06-15

Purpose: Dose protraction factor should be considered in order to model the TCP calculations. Nevertheless, this study describes a brief discussion showing that the lack of its inclusion should not invalidate these calculations for prostate VMAT treatments. Methods: Dose protraction factor (G) modifies the quadratic term of the linear-quadratic expression in order to take into account the sublethal damage repair of protracting the dose delivery. If the delivery takes a short time (instantaneous), G = 1. For any other dose delivery pattern, G < 1. The Lea-Catcheside dose protraction factor for external beam radiotherapy contains terms depending of on the tissue specific repair parameter (λ) and the irradiation time (T). Expanding the exponential term using a Taylor’s series and neglecting terms of order (λT){sup 3}, the approximation leads to G = 1. The described situation occurs for 3DCRT techniques, where treatment times are about few minutes. For IMRT techniques, fraction times are prolonged compared to 3DCRT times. Wang et al. (2003) and Fowler et al. (2004) investigated the protraction effect with respect to IMRT treatments, reporting clinically significant loss in biological effect associated with IMRT delivery times. Results: Treatment times are noticeably reduced for prostate treatments using VMAT techniques. These times are comparable to 3DCRT times, leading to consider the previous approximation. Conclusion: Dose protraction factor can be approximated by G = 1 in TCP calculations for prostate treatments using VMAT techniques.

Improving performance on core processes of care.

Science.gov (United States)

Austin, John Matthew; Pronovost, Peter J

2016-06-01

This article describes the recent literature on using extrinsic and intrinsic motivators to improve performance on core processes of care, highlighting literature that describes general frameworks for quality improvement work. The literature supporting the effectiveness of extrinsic motivators to improve quality is generally positive for public reporting of performance, with mixed results for pay-for-performance. A four-element quality improvement framework developed by The Armstrong Institute at Johns Hopkins Medicine was developed with intrinsic motivation in mind. The clear definition and communication of goals are important for quality improvement work. Training clinicians in improvement science, such as lean sigma, teamwork, or culture change provides clinicians with the skills they need to drive the improvement work. Peer learning communities offer the opportunity for clinicians to engage with each other and offer support in their work. The transparent reporting of performance helps ensure accountability of performance ranging from individual clinicians to governance. Quality improvement work that is led by and engages clinicians offers the opportunity for the work to be both meaningful and sustainable. The literature supports approaching quality improvement work in a systematic way, including the key elements of communication, infrastructure building, training, transparency, and accountability.

Web Transfer Over Satellites Being Improved

Science.gov (United States)

Allman, Mark

1999-01-01

Extensive research conducted by NASA Lewis Research Center's Satellite Networks and Architectures Branch and the Ohio University has demonstrated performance improvements in World Wide Web transfers over satellite-based networks. The use of a new version of the Hypertext Transfer Protocol (HTTP) reduced the time required to load web pages over a single Transmission Control Protocol (TCP) connection traversing a satellite channel. However, an older technique of simultaneously making multiple requests of a given server has been shown to provide even faster transfer time. Unfortunately, the use of multiple simultaneous requests has been shown to be harmful to the network in general. Therefore, we are developing new mechanisms for the HTTP protocol which may allow a single request at any given time to perform as well as, or better than, multiple simultaneous requests. In the course of study, we also demonstrated that the time for web pages to load is at least as short via a satellite link as it is via a standard 28.8-kbps dialup modem channel. This demonstrates that satellites are a viable means of accessing the Internet.

SU-F-T-221: An Assessment of the Potential for Improved Local Control of Skull- Base Chordomas Via Reduction of the Proton Beam Range Uncertainty

Energy Technology Data Exchange (ETDEWEB)

Muller, L; Soldner, A; Kirk, M; Fager, M; Solberg, T; Robert, L; Dolney, D [University of Pennsylvania, Philadelphia, PA (United States)

2016-06-15

Purpose: The beam range uncertainty presents a special challenge for proton therapy. Novel technologies currently under development offer strategies to reduce the range uncertainty [1,2]. This work quantifies the potential advantages that could be realized by such a reduction for dosimetrically challenging chordomas at the base of skull. Therapeutic improvement was assessed by evaluating tumor control probabilities (TCP) and normal tissue complication probabilities (NTCP). Methods: Treatment plans were made for a modulated-scanned proton delivery technique using the Eclipse treatment planning system. The prescription dose was 7920 cGy to the CTV. Three different range uncertainty scenarios were considered: 5 mm (3.5% of the beam range + 1 mm, representing current clinical practice, “Curr”), 2 mm (1.3%), and 1 mm (0.7%). For each of 4 patients, 3 different PTVs were defined via uniform expansion of the CTV by the value of the range uncertainty. Tumor control probability (TCP) and normal tissue complication probabilities (NTCPs) for organs-at-risk (OARs) were calculated using the Lyman-Kutcher-Burman[3] formalism and published model parameters [ref Terahara[4], quantec S10, Burman Red Journal v21 pp 123]. Our plan optimization strategy was to achieve PTV close to prescription while maintaining OAR NTCP values at or better than the Curr plan. Results: The average TCP values for the 5, 2, and 1 mm range uncertainty scenarios are 51%, 55% and 65%. The improvement in TCP for patients was between 4 and 30%, depending primarily on the proximity of the GTV to OAR. The average NTCPs for the brainstem and cord were about 4% and 1%, respectively, for all target margins. Conclusion: For base of skull chordomas, reduced target margins can substantially increase the TCP without increasing the NTCP. This work demonstrates the potential significance of a reduction in the range uncertainty for proton beams.

Windows with improved energy performances

DEFF Research Database (Denmark)

Laustsen, Jacob Birck; Svendsen, Svend

2003-01-01

Heat loss through windows represents a considerable part of the total heat loss from houses. However, apart from providing daylight access and view, windows offer a unique potential for solar gain to be exploited during the heating season. Until now valuation of the energy performance of windows...... has primary focused on the heat loss coefficient, U-value. However, as the U-value, especially for the glazing part, has improved considerably during the last years, the total solar energy transmittance, g-value, has become equally important to the total energy performance of windows. Improved energy...... resulted in a window with a positive net energy gain (in short the Net Gain Window), which means that it contributes to the space heating of the building. All improvements are based on existing technology and manufacturing methods. The results from this work show that the energy performances of windows can...

Programs to improve plant performance

International Nuclear Information System (INIS)

Felmus, N.L.

1987-01-01

Looking toward the 1990's, we see a period in which our industry will face the challenge of improving the performance of the nuclear plants which are built and operating. The skills and technology are at hand to make good plant performance a reality and we believe the time has come to use them to achieve that end. As reserve margins decline, utilities and their regulators will increasingly seek to tap the unexploited capacity tied up in plants operating below their optimum availability. This paper describes a number of the programs, plant improvements and operations improvements which can yield a significant increase in nuclear plant availability and capacity factor now and into the 1990's. (author)

Methodological approach to organizational performance improvement process

OpenAIRE

Buble, Marin; Dulčić, Želimir; Pavić, Ivan

2017-01-01

Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

Human performance improvement for nuclear power plants

International Nuclear Information System (INIS)

2005-01-01

The IAEA assists NPP operating organizations to improve plant performance through a focus on human performance improvement in areas like organizational and leadership development, senior management decision making, organization and management of HPI programmes including tools needed for effective HPI implementation, safety culture enhancement, knowledge management, personnel selection and staffing, career development, training and development, work design, scheduling and conditions, procedure and other job-aid development and use, effective communications, human performance monitoring, motivation. Many NPP operating organizations in Member States, are not yet achieving the full potential of their NPP technology/equipment regarding safety, operational or economic performance due to human performance weaknesses. The IAEA's HPI (Human Performance Improvement) services provide a means for these organizations to efficiently and effectively learn from international experts and the experiences of others in improving plant performance through human performance improvements. NPP operating organizations can benefit from these services in a number of ways, including requesting a national project, participating in a regional project, or requesting an assist visit. The types of activities provided through these services include assistance in benchmarking practices of successful organizations, providing information exchange and reviews of current practices through assist missions, conducting workshops on focused human performance topics, evaluating current human performance methods, including assistance in implementing self assessment programmes and providing support to safety culture enhancement programmes based on self-assessment

Performance improvement program: goals and experience

International Nuclear Information System (INIS)

Guglielmi, F.

2015-01-01

Following long 54 month refurbishment outage at Point Lepreau Generating Station, operational performance had fallen below industry standards in a number of areas. Leadership development and succession planning had stalled. Operational focus was low primarily due to the construction focus during refurbishment. Condition of balance of plant was poor including several long standing deficiencies. In order to improve performance, the site implemented a framework based on INPO 12-011: Focus on Improving Behaviours; Set common goals and demonstrate results; Align and engage the organization; Drive to achieve high levels of performance and sustain performance.

Performance improvement program: goals and experience

Energy Technology Data Exchange (ETDEWEB)

Guglielmi, F. [Point Lepreau Generating Station, Maces Bay, New Brunswick (Canada)

2015-07-01

Following long 54 month refurbishment outage at Point Lepreau Generating Station, operational performance had fallen below industry standards in a number of areas. Leadership development and succession planning had stalled. Operational focus was low primarily due to the construction focus during refurbishment. Condition of balance of plant was poor including several long standing deficiencies. In order to improve performance, the site implemented a framework based on INPO 12-011: Focus on Improving Behaviours; Set common goals and demonstrate results; Align and engage the organization; Drive to achieve high levels of performance and sustain performance.

Methodological approach to organizational performance improvement process

Directory of Open Access Journals (Sweden)

Marin Buble

2001-01-01

Full Text Available Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

WE-F-304-05: Cranial TCP/NTCP Modeling Insights and Caveats

International Nuclear Information System (INIS)

El Naqa, I.

2015-01-01

Stereotactic Body Radiation Therapy (SBRT) was introduced clinically more than twenty years ago, and many subsequent publications have reported safety and efficacy data. The AAPM Working Group on Biological Effects of Hypofractionated Radiotherapy/SBRT (WGSBRT) extracted published treatment outcomes data from extensive literature searches to summarize and construct tumor control probability (TCP) and normal tissue complication probability (NTCP) models for six anatomical regions: Cranial, Head and Neck, Thoracic, Abdominal, Pelvic, and Spinal. In this session, we present the WGSBRT’s work for cranial sites, and recurrent head and neck cancer. From literature-based data and associated models, guidelines to aid with safe and effective hypofractionated radiotherapy treatment are being determined. Further, the ability of existing and proposed radiobiological models to fit these data is considered as to the ability to distinguish between the linear-quadratic and alternative radiobiological models such as secondary cell death from vascular damage, immunogenic, or bystander effects. Where appropriate, specific model parameters are estimated. As described in “The lessons of QUANTEC,” (1), lack of adequate reporting standards continues to limit the amount of useful quantitative information that can be extracted from peer-reviewed publications. Recommendations regarding reporting standards are considered, to enable such reviews to achieve more complete characterization of clinical outcomes. 1 Jackson A, Marks LB, Bentzen SM, Eisbruch A, Yorke ED, Ten Haken RK, Constine LS, Deasy JO. The lessons of QUANTEC: recommendations for reporting and gathering data on dose-volume dependencies of treatment outcome. Int J Radiat Oncol Biol Phys. 2010 Mar 1;76(3 Suppl):S155–60. Learning Objectives: Describe the techniques, types of cancer and dose schedules used in treating recurrent H&N cancers with SBRT List the radiobiological models that compete with the linear-quadratic model

WE-F-304-05: Cranial TCP/NTCP Modeling Insights and Caveats

Energy Technology Data Exchange (ETDEWEB)

El Naqa, I. [University of Michigan (United States)

2015-06-15

Stereotactic Body Radiation Therapy (SBRT) was introduced clinically more than twenty years ago, and many subsequent publications have reported safety and efficacy data. The AAPM Working Group on Biological Effects of Hypofractionated Radiotherapy/SBRT (WGSBRT) extracted published treatment outcomes data from extensive literature searches to summarize and construct tumor control probability (TCP) and normal tissue complication probability (NTCP) models for six anatomical regions: Cranial, Head and Neck, Thoracic, Abdominal, Pelvic, and Spinal. In this session, we present the WGSBRT’s work for cranial sites, and recurrent head and neck cancer. From literature-based data and associated models, guidelines to aid with safe and effective hypofractionated radiotherapy treatment are being determined. Further, the ability of existing and proposed radiobiological models to fit these data is considered as to the ability to distinguish between the linear-quadratic and alternative radiobiological models such as secondary cell death from vascular damage, immunogenic, or bystander effects. Where appropriate, specific model parameters are estimated. As described in “The lessons of QUANTEC,” (1), lack of adequate reporting standards continues to limit the amount of useful quantitative information that can be extracted from peer-reviewed publications. Recommendations regarding reporting standards are considered, to enable such reviews to achieve more complete characterization of clinical outcomes. 1 Jackson A, Marks LB, Bentzen SM, Eisbruch A, Yorke ED, Ten Haken RK, Constine LS, Deasy JO. The lessons of QUANTEC: recommendations for reporting and gathering data on dose-volume dependencies of treatment outcome. Int J Radiat Oncol Biol Phys. 2010 Mar 1;76(3 Suppl):S155–60. Learning Objectives: Describe the techniques, types of cancer and dose schedules used in treating recurrent H&N cancers with SBRT List the radiobiological models that compete with the linear-quadratic model

A Modification of the Fuzzy Logic Based DASH Adaptation Scheme for Performance Improvement

Directory of Open Access Journals (Sweden)

Hyun Jun Kim

2018-01-01

Full Text Available We propose a modification of the fuzzy logic based DASH adaptation scheme (FDASH for seamless media service in time-varying network conditions. The proposed scheme (mFDASH selects a more appropriate bit-rate for the next segment by modification of the Fuzzy Logic Controller (FLC and estimates more accurate available bandwidth than FDASH scheme by using History-Based TCP Throughput Estimation. Moreover, mFDASH reduces the number of video bit-rate changes by applying Segment Bit-Rate Filtering Module (SBFM and employs Start Mechanism for clients to provide high-quality videos in the very beginning stage of the streaming service. Lastly, Sleeping Mechanism is applied to avoid any expected buffer overflow. We then use NS-3 Network Simulator to verify the performance of mFDASH. Upon the experimental results, mFDASH shows no buffer overflow within the limited buffer size, which is not guaranteed in FDASH. Also, we confirm that mFDASH provides the highest QoE to DASH clients among the three schemes (mFDASH, FDASH, and SVAA in Point-to-Point networks, Wi-Fi networks, and LTE networks, respectively.

Performance Results of CMMI-Based Process Improvement

National Research Council Canada - National Science Library

Gibson, Diane L; Goldenson, Dennis R; Kost, Keith

2006-01-01

.... There now is evidence that process improvement using the CMMI Product Suite can result in improvements in schedule and cost performance, product quality, return on investment and other measures of performance outcome...

The impact of multi-criteria performance measurement on business performance improvement

OpenAIRE

Kasie, Fentahun Moges; Belay, Alemu Moges

2013-01-01

Purpose: The purpose of this paper is to investigate the relationship between multi-criteria performance measurement (MCPM) practice and business performance improvement using the raw data collected from 33 selected manufacturing companies. In addition, it proposes modified MCPM model as an effective approach to improve business performance of manufacturing companies. Design/methodology/approach:Research paper. Primary and secondary data were collected using questionnaire survey, interview an...

Containment performance improvement program

International Nuclear Information System (INIS)

Beckner, W.; Mitchell, J.; Soffer, L.; Chow, E.; Lane, J.; Ridgely, J.

1990-01-01

The Containment Performance Improvement (CPI) program has been one of the main elements in the US Nuclear Regulatory Commission's (NRC's) integrated approach to closure of severe accident issues for US nuclear power plants. During the course of the program, results from various probabilistic risk assessment (PRA) studies and from severe accident research programs for the five US containment types have been examined to identify significant containment challenges and to evaluate potential improvements. The five containment types considered are: the boiling water reactor (BMR) Mark I containment, the BWR Mark II containment, the BWR Mark III containment, the pressurized water reactor (PWR) ice condenser containment, and the PWR dry containments (including both subatmospheric and large subtypes). The focus of the CPI program has been containment performance and accident mitigation, however, insights are also being obtained in the areas of accident prevention and accident management

QoS Modeling for End-to-End Performance Evaluation over Networks with Wireless Access

Directory of Open Access Journals (Sweden)

Gómez Gerardo

2010-01-01

Full Text Available This paper presents an end-to-end Quality of Service (QoS model for assessing the performance of data services over networks with wireless access. The proposed model deals with performance degradation across protocol layers using a bottom-up strategy, starting with the physical layer and moving on up to the application layer. This approach makes it possible to analytically assess performance at different layers, thereby facilitating a possible end-to-end optimization process. As a representative case, a scenario where a set of mobile terminals connected to a streaming server through an IP access node has been studied. UDP, TCP, and the new TCP-Friendly Rate Control (TFRC protocols were analyzed at the transport layer. The radio interface consisted of a variable-rate multiuser and multichannel subsystem, including retransmissions and adaptive modulation and coding. The proposed analytical QoS model was validated on a real-time emulator of an end-to-end network with wireless access and proved to be very useful for the purposes of service performance estimation and optimization.

A Hybrid Data Compression Scheme for Improved VNC

OpenAIRE

Xiaozheng (Jane) Zhang; Hirofumi Takahashi

2007-01-01

Virtual Network Computing (VNC) has emerged as a promising technology in distributed computing environment since its invention in the late nineties. Successful application of VNC requires rapid data transfer from one machine to another over a TCP/IP network connection. However transfer of screen data consumes much network bandwidth and current data encoding schemes for VNC are far from being ideal. This paper seeks to improve screen data compression techniques to enable VNC over slow connecti...

HLA RTI performance evaluation

CSIR Research Space (South Africa)

Malinga, L

2009-07-01

Full Text Available size of the UDP packet of the network, namely 64 KB, when using the best effort mode. The performance analysis task of the different RTIs was undertaken for two reasons. The first is to re-establish a High Level Architecture (HLA) in our Research... exchange messages over the network with the RTI Gateway process, via TCP sockets or UDP in order to realise the services associated with the RTI. The allocation of CPU resources to the federate and the RTIA process is exclusively managed...

Empirical investigation on the dependence of TCP downstream throughput on SNR in an IEEE802.11b WLAN system

Directory of Open Access Journals (Sweden)

Ikponmwosa Oghogho

2017-04-01

Full Text Available The dependence of TCP downstream throughput (TCPdownT on signal to noise ratio (SNR in an IEEE802.11b WLAN system was investigated in various environments and varieties of QoS traffic. TCPdownT was measured for various SNR observed. An Infrastructure based IEEE802.11b WLAN system having networked computers on which measurement software were installed, was set up consecutively in various environments (open corridor, small offices with block walls and plaster boards and free space. Empirical models describing TCPdownT against SNR for different signal ranges (all ranges of signals, strong signals only, grey signals only and weak signals only were statistically generated and validated. As the SNR values changed from high (strong signals through low (grey signals to very low (weak signals, our results show a strong dependence of TCPdownT on the received SNR. Our models showed lower RMS errors when compared with other similar models. We observed RMS errors of 0.6734791 Mbps, 0.472209 Mbps, 0.9111563 Mbps and 0.5764460 Mbps for general (all SNR model, strong signals model, grey signals model and Weak signals model respectively. Our models will provide researchers and WLAN systems users with a tool to estimate the TCP downstream throughput in a real network in various environments by monitoring the received SNR.

Development of multi-functional streetscape green infrastructure using a performance index approach.

Science.gov (United States)

Tiwary, A; Williams, I D; Heidrich, O; Namdeo, A; Bandaru, V; Calfapietra, C

2016-01-01

This paper presents a performance evaluation framework for streetscape vegetation. A performance index (PI) is conceived using the following seven traits, specific to the street environments - Pollution Flux Potential (PFP), Carbon Sequestration Potential (CSP), Thermal Comfort Potential (TCP), Noise Attenuation Potential (NAP), Biomass Energy Potential (BEP), Environmental Stress Tolerance (EST) and Crown Projection Factor (CPF). Its application is demonstrated through a case study using fifteen street vegetation species from the UK, utilising a combination of direct field measurements and inventoried literature data. Our results indicate greater preference to small-to-medium size trees and evergreen shrubs over larger trees for streetscaping. The proposed PI approach can be potentially applied two-fold: one, for evaluation of the performance of the existing street vegetation, facilitating the prospects for further improving them through management strategies and better species selection; two, for planning new streetscapes and multi-functional biomass as part of extending the green urban infrastructure. Copyright © 2015 Elsevier Ltd. All rights reserved.

Improving operational performance by influencing shopfloor behavior via performance management practices

NARCIS (Netherlands)

de Leeuw, S.L.J.M.; van den Berg, J.P.

2011-01-01

It is generally believed that companies applying performance management practices outperform those that do not measure and manage their performance. Studies examining the link between performance management and performance improvement implicitly assume that performance management affects behavior of

Combinatorial metabolic engineering of Pseudomonas putida KT2440 for efficient mineralization of 1,2,3-trichloropropane.

Science.gov (United States)

Gong, Ting; Xu, Xiaoqing; Che, You; Liu, Ruihua; Gao, Weixia; Zhao, Fengjie; Yu, Huilei; Liang, Jingnan; Xu, Ping; Song, Cunjiang; Yang, Chao

2017-08-01

An industrial waste, 1,2,3-trichloropropane (TCP), is toxic and extremely recalcitrant to biodegradation. To date, no natural TCP degraders able to mineralize TCP aerobically have been isolated. In this work, we engineered a biosafety Pseudomonas putida strain KT2440 for aerobic mineralization of TCP by implantation of a synthetic biodegradation pathway into the chromosome and further improved TCP mineralization using combinatorial engineering strategies. Initially, a synthetic pathway composed of haloalkane dehalogenase, haloalcohol dehalogenase and epoxide hydrolase was functionally assembled for the conversion of TCP into glycerol in P. putida KT2440. Then, the growth lag-phase of using glycerol as a growth precursor was eliminated by deleting the glpR gene, significantly enhancing the flux of carbon through the pathway. Subsequently, we improved the oxygen sequestering capacity of this strain through the heterologous expression of Vitreoscilla hemoglobin, which makes this strain able to mineralize TCP under oxygen-limited conditions. Lastly, we further improved intracellular energy charge (ATP/ADP ratio) and reducing power (NADPH/NADP + ratio) by deleting flagella-related genes in the genome of P. putida KT2440. The resulting strain (named KTU-TGVF) could efficiently utilize TCP as the sole source of carbon for growth. Degradation studies in a bioreactor highlight the value of this engineered strain for TCP bioremediation.

Remediation of persistent organic pollutant-contaminated soil using biosurfactant-enhanced electrokinetics coupled with a zero-valent iron/activated carbon permeable reactive barrier.

Science.gov (United States)

Sun, Yuchao; Gao, Ke; Zhang, Yun; Zou, Hua

2017-12-01

Zero-valent iron/activated carbon (Fe/C) particles can degrade persistent organic pollutants via micro-electrolysis and therefore, they may be used to develop materials for permeable reactive barriers (PRBs). In this study, surfactant-enhanced electrokinetics (EK) was coupled with a Fe/C-PRB to treat phenanthrene (PHE) and 2,4,6-trichlorophenol (TCP) co-contaminated clay soil. An environment-friendly biosurfactant, rhamnolipid, was selected as the solubility-enhancing agent. Five bench-scale tests were conducted to investigate the performance of EK-PRB on PHE and TCP removal from soil as well as the impact of pH and rhamnolipid concentration. The results show that both PHE and TCP, driven by electro-osmotic flow (EOF), moved toward the cathode and reacted with the Fe/C-PRB. Catholyte acidification and rhamnolipid concentration increase improved the removal efficiencies of PHE and TCP. The highest removal efficiency of PHE in soil column was five times the efficiency of the control group on which only EK was applied (49.89 versus 9.40%). The highest removal efficiency of TCP in soil column was 4.5 times the efficiency of the control group (64.60 versus 14.30%). Desorption and mobility of PHE and TCP improved with the increase of rhamnolipid concentration when this exceeded the critical micelle concentration. This study indicates that the combination of EK and a Fe/C-PRB is efficient and promising for removing persistent organic pollutants (POPs) from contaminated soil with the enhancement of rhamnolipid.

WE-AB-207B-11: Optimizing Tumor Control Probability in Radiation Therapy Treatment - Application to HDR Cervical Cancer

Energy Technology Data Exchange (ETDEWEB)

Lee, E [Georgia Institute of Technology, Atlanta, GA (Georgia); Yuan, F [Georgia Institute of Technology, Atlanta, GEORGIA (United States); Templeton, A [Rush University Medical Center, Chicago, IL (United States); Yao, R [Columbus Regional Healthcare, Columbus, GA (United States); Chu, J [Rush University Medical Center, Oak Brook, IL (United States)

2016-06-15

Purpose: The ultimate goal of radiotherapy treatment planning is to find a treatment that will yield a high tumor-control-probability(TCP) with an acceptable normal-tissue-complication probability(NTCP). Yet most treatment planning today is not based upon optimization of TCPs and NTCPs, but rather upon meeting physical dose and volume constraints defined by the planner. We design treatment plans that optimize TCP directly and contrast them with the clinical dose-based plans. PET image is incorporated to evaluate gain in TCP for dose escalation. Methods: We build a nonlinear mixed integer programming optimization model that maximizes TCP directly while satisfying the dose requirements on the targeted organ and healthy tissues. The solution strategy first fits the TCP function with a piecewise-linear approximation, then solves the problem that maximizes the piecewise linear approximation of TCP, and finally performs a local neighborhood search to improve the TCP value. To gauge the feasibility, characteristics, and potential benefit of PET-image guided dose escalation, initial validation consists of fifteen cervical cancer HDR patient cases. These patients have all received prior 45Gy of external radiation dose. For both escalated strategies, we consider 35Gy PTV-dose, and two variations (37Gy-boost to BTV vs 40Gy-boost) to PET-image-pockets. Results: TCP for standard clinical plans range from 59.4% - 63.6%. TCP for dose-based PET-guided escalated-dose-plan ranges from 63.8%–98.6% for all patients; whereas TCP-optimized plans achieves over 91% for all patients. There is marginal difference in TCP among those with 37Gy-boosted vs 40Gy-boosted. There is no increase in rectum and bladder dose among all plans. Conclusion: Optimizing TCP directly results in highly conformed treatment plans. The TCP-optimized plan is individualized based on the biological PET-image of the patients. The TCP-optimization framework is generalizable and has been applied successfully to other

WE-AB-207B-11: Optimizing Tumor Control Probability in Radiation Therapy Treatment - Application to HDR Cervical Cancer

International Nuclear Information System (INIS)

Lee, E; Yuan, F; Templeton, A; Yao, R; Chu, J

2016-01-01

Purpose: The ultimate goal of radiotherapy treatment planning is to find a treatment that will yield a high tumor-control-probability(TCP) with an acceptable normal-tissue-complication probability(NTCP). Yet most treatment planning today is not based upon optimization of TCPs and NTCPs, but rather upon meeting physical dose and volume constraints defined by the planner. We design treatment plans that optimize TCP directly and contrast them with the clinical dose-based plans. PET image is incorporated to evaluate gain in TCP for dose escalation. Methods: We build a nonlinear mixed integer programming optimization model that maximizes TCP directly while satisfying the dose requirements on the targeted organ and healthy tissues. The solution strategy first fits the TCP function with a piecewise-linear approximation, then solves the problem that maximizes the piecewise linear approximation of TCP, and finally performs a local neighborhood search to improve the TCP value. To gauge the feasibility, characteristics, and potential benefit of PET-image guided dose escalation, initial validation consists of fifteen cervical cancer HDR patient cases. These patients have all received prior 45Gy of external radiation dose. For both escalated strategies, we consider 35Gy PTV-dose, and two variations (37Gy-boost to BTV vs 40Gy-boost) to PET-image-pockets. Results: TCP for standard clinical plans range from 59.4% - 63.6%. TCP for dose-based PET-guided escalated-dose-plan ranges from 63.8%–98.6% for all patients; whereas TCP-optimized plans achieves over 91% for all patients. There is marginal difference in TCP among those with 37Gy-boosted vs 40Gy-boosted. There is no increase in rectum and bladder dose among all plans. Conclusion: Optimizing TCP directly results in highly conformed treatment plans. The TCP-optimized plan is individualized based on the biological PET-image of the patients. The TCP-optimization framework is generalizable and has been applied successfully to other

Optimizing the ASC WAN: evaluating network performance tools for comparing transport protocols.

Energy Technology Data Exchange (ETDEWEB)

Lydick, Christopher L.

2007-07-01

The Advanced Simulation & Computing Wide Area Network (ASC WAN), which is a high delay-bandwidth network connection between US Department of Energy National Laboratories, is constantly being examined and evaluated for efficiency. One of the current transport-layer protocols which is used, TCP, was developed for traffic demands which are different from that on the ASC WAN. The Stream Control Transport Protocol (SCTP), on the other hand, has shown characteristics which make it more appealing to networks such as these. Most important, before considering a replacement for TCP on any network, a testing tool that performs well against certain criteria needs to be found. In order to try to find such a tool, two popular networking tools (Netperf v.2.4.3 & v.2.4.6 (OpenSS7 STREAMS), and Iperf v.2.0.6) were tested. These tools implement both TCP and SCTP and were evaluated using four metrics: (1) How effectively can the tool reach a throughput near the bandwidth? (2) How much of the CPU does the tool utilize during operation? (3) Is the tool freely and widely available? And, (4) Is the tool actively developed? Following the analysis of those tools, this paper goes further into explaining some recommendations and ideas for future work.

Improving human performance in maintenance personnel

International Nuclear Information System (INIS)

Gonzalez Anez, Francisco; Agueero Agueero, Jorge

2010-01-01

The continuous evolution and improvement of safety-related processes has included the analysis, design and development of training plans for the qualification of maintenance nuclear power plant personnel. In this respect, the international references in this area recommend the establishment of systematic qualification programmes for personnel performing functions or carrying out safety related tasks. Maintenance personnel qualification processes have improved significantly, and training plans have been designed and developed based on Systematic Approach to Training methodology to each job position. These improvements have been clearly reflected in recent training programmes with new training material and training facilities focused not only on developing technical knowledge and skills but also on improving attitudes and safety culture. The objectives of maintenance training facilities such as laboratories, mock-ups real an virtual, hydraulic loops, field simulators and other training material to be used in the maintenance training centre are to cover training necessities for initial and continuous qualification. Evidently, all these improvements made in the qualification of plant personnel should be extended to include supplemental personnel (external or contracted) performing safety-related tasks. The supplemental personnel constitute a very spread group, covering the performance of multiple activities entailing different levels of responsibility. Some of these activities are performed permanently at the plant, while others are occasional or sporadic. In order to establish qualification requirements for these supplemental workers, it is recommended to establish a rigorous analysis of job positions and tasks. The objective will be to identify the qualification requirements to assure competence and safety. (authors)

Improving Mobility Performance in Wheelchair Basketball.

Science.gov (United States)

Veeger, Thom T J; De Witte, Annemarie M H; Berger, Monique A M; Van Der Slikke, Rienk M A; Veeger, Dirkjan H E J; Hoozemans, Marco J M

2017-10-16

This study aimed to investigate which characteristics of athlete, wheelchair and athlete-wheelchair interface are the best predictors of wheelchair basketball mobility performance. Sixty experienced wheelchair basketball players performed a wheelchair mobility performance test to assess their mobility performance. To determine which variables were the best predictors of mobility performance, forward stepwise linear regression analyses were performed on a set of 33 characteristics, including ten athlete, nineteen wheelchair and four athlete-wheelchair interface characteristics. Eight of the characteristics turned out to be significant predictors of wheelchair basketball mobility performance. Classification, experience, maximal isometric force, wheel axis height and hand rim diameter - which both interchangeable with each other and wheel diameter - camber angle, and the vertical distance between shoulder and rear wheel axis - which was interchangeable with seat height - were positively associated with mobility performance. The vertical distance between the front seat and the footrest was negatively associated with mobility performance. With this insight, coaches and biomechanical specialists are provided with statistical findings to determine which characteristics they could focus on best to improve mobility performance. Six out of eight predictors are modifiable and can be optimized to improve mobility performance. These adjustments could be carried out both in training (maximal isometric force) and in wheelchair configurations (e.g. camber angle).

Biomimetic composite coating on rapid prototyped scaffolds for bone tissue engineering.

Science.gov (United States)

Arafat, M Tarik; Lam, Christopher X F; Ekaputra, Andrew K; Wong, Siew Yee; Li, Xu; Gibson, Ian

2011-02-01

The objective of this present study was to improve the functional performance of rapid prototyped scaffolds for bone tissue engineering through biomimetic composite coating. Rapid prototyped poly(ε-caprolactone)/tri-calcium phosphate (PCL/TCP) scaffolds were fabricated using the screw extrusion system (SES). The fabricated PCL/TCP scaffolds were coated with a carbonated hydroxyapatite (CHA)-gelatin composite via biomimetic co-precipitation. The structure of the prepared CHA-gelatin composite coating was studied by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. Compressive mechanical testing revealed that the coating process did not have any detrimental effect on the mechanical properties of the scaffolds. The cell-scaffold interaction was studied by culturing porcine bone marrow stromal cells (BMSCs) on the scaffolds and assessing the proliferation and bone-related gene and protein expression capabilities of the cells. Confocal laser microscopy and SEM images of the cell-scaffold constructs showed a uniformly distributed cell sheet and accumulation of extracellular matrix in the interior of CHA-gelatin composite-coated PCL/TCP scaffolds. The proliferation rate of BMSCs on CHA-gelatin composite-coated PCL/TCP scaffolds was about 2.3 and 1.7 times higher than that on PCL/TCP scaffolds and CHA-coated PCL/TCP scaffolds, respectively, by day 10. Furthermore, reverse transcription polymerase chain reaction and Western blot analysis revealed that CHA-gelatin composite-coated PCL/TCP scaffolds stimulate osteogenic differentiation of BMSCs the most, compared with PCL/TCP scaffolds and CHA-coated PCL/TCP scaffolds. These results demonstrate that CHA-gelatin composite-coated rapid prototyped PCL/TCP scaffolds are promising for bone tissue engineering. Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Structural and mechanical characterization of boron doped biphasic calcium phosphate produced by wet chemical method and subsequent thermal treatment

Energy Technology Data Exchange (ETDEWEB)

Albayrak, Onder, E-mail: albayrakonder@mersin.edu.tr

2016-03-15

In the current study, boron doped biphasic calcium phosphate bioceramics consisting of a mixture of boron doped hydroxyapatite (BHA) and beta tricalcium phosphate (β-TCP) of varying BHA/β-TCP ratios were obtained after sintering stage. The effects of varying boron contents and different sintering temperatures on the BHA/β-TCP ratios and on the sinterability of the final products were investigated. Particle sizes and morphologies of the obtained precipitates were determined using SEM. XRD and FTIR investigation were conducted to detect the boron formation in the structure of HA and quantitative analysis was performed to determine the BHA/β-TCP ratio before and after sintering stage. In order to determine the sinterability of the obtained powders, pellets were prepared and sintered; the rates of densification were calculated and obtained results were correlated by SEM images. Also Vickers microhardness values of the sintered samples were determined. The experimental results verified that boron doped hydroxyapatite powders were obtained after sintering stage and the structure consists of a mixture of BHA and β-TCP. As the boron content used in the precipitation stage increases, β-TCP content of the BHA/β-TCP ratio increases but sinterability, density and microhardness deteriorate. As the sintering temperature increases, β-TCP content, density and microhardness of the samples increase and sinterability improves. - Highlights: • This is the first paper about boron doped biphasic calcium phosphate bioceramics. • Boron doping affects the structural and mechanical properties. • BHA/β-TCP ratio can be adjustable with boron content and sintering temperature.

South Bank Coke Ovens heating performance improvements

Energy Technology Data Exchange (ETDEWEB)

Fraser, A.J. [South Bank Coke Ovens (United Kingdom)

1995-12-31

The coke oven batteries at South Bank Coke Ovens had a history of refractory failure, overheating, and poor environmental performance despite repeated attempts to solve the problem. The fundamental design was poor, but previous upgrade attempts had a history of short term improvements followed by renewed decline, suggesting that the problem may not merely with the equipment. An audit of the area showed multiple morale, equipment and communications problems, although a significant proportion of the workforce were interested in improving the situation. A group of those interested in performance improvements was called together and objectives agreed upon. Communications were upgraded and problem walls analysed for their particular weaknesses. A team approach was used for maintenance, leading to slowly improving pushing emission factors. Temperature control equipment ensured better environmental performance and lower electricity consumption. 5 refs., 3 figs.

INT WFC pre-discovery detection of the nova M31N 2017-11a (AT2017hvi, PTSS-17zap, TCP J00425419+4130425)

Science.gov (United States)

Mantero-Castaneda, E. A.; Hernandez-Sanchez, M.; Arce-Tord, C.; Esteban-Gutierrez, A.; Garcia-Broock, E.; Garcia-Rivas, M.; Gonzalez-Cuesta, L.; Hermosa-Munoz, L.; Jimenez-Gallardo, A.; Lopez-Navas, E.; Otero-Santos, J.; Prendin, M. G.; Rodriguez-Sanchez, M.; Perez-Fournon, I.

2017-12-01

We report the pre-discovery detection of the nova M31N 2017-11a (AT2017hvi, PTSS-17zap, TCP J00425419+4130425) with the Isaac Newton Telescope* Wide Field Camera on the night of 29 October 2017, 4.845 days before the discovery observations on 2017/11/04.695 by the PMO-Tsinghua Supernova Survey (PTSS).

Parametric Study for MOV Performance Improvement Using PPM Program

Energy Technology Data Exchange (ETDEWEB)

Lee, Seungho; Seon, Juhyoung; Han, Bongsub [SOOSAN INDUSTRIES, Seoul (Korea, Republic of)

2016-10-15

Nuclear power plants mainly use Air Operated Valve(hereinafter referred to as AOV) and Motor Operator Valve(hereinafter referred to as MOV) for protecting system, blocking and controlling flow. Field test(static, dynamic test) results and performance prediction program are used to evaluate if MOV currently installed on nuclear power plants has the operational performance. The improvement of operating performance for Flexible Gate valve was confirmed on changing input variables of performance program(PPM). here are several methods through reviewing design basis, changes operating procedures and maintenance work of stem(or packing, etc.) to improve operating performance of MOV generally installed in the nuclear power plants. This study verified the changes of the MOV operating performance through the improvement of stem and hydraulic parts(seat, guide etc.). Especially, MOV operating performance was much greater improved when the Disk Seat Angle was decreasing. Generally, improvement work to minimize friction of seat, disk and guide is limited and dynamic diagnostic testing has to be performed with change in valve factor for improvement of hydraulic parts.

An Adaptive Middleware for Improved Computational Performance

DEFF Research Database (Denmark)

Bonnichsen, Lars Frydendal

, we are improving computational performance by exploiting modern hardware features, such as dynamic voltage-frequency scaling and transactional memory. Adapting software is an iterative process, requiring that we continually revisit it to meet new requirements or realities; a time consuming process......The performance improvements in computer systems over the past 60 years have been fueled by an exponential increase in energy efficiency. In recent years, the phenomenon known as the end of Dennard’s scaling has slowed energy efficiency improvements — but improving computer energy efficiency...... is more important now than ever. Traditionally, most improvements in computer energy efficiency have come from improvements in lithography — the ability to produce smaller transistors — and computer architecture - the ability to apply those transistors efficiently. Since the end of scaling, we have seen...

Calibration of robot tool centre point using camera-based system

Directory of Open Access Journals (Sweden)

Gordić Zaviša

2016-01-01

Full Text Available Robot Tool Centre Point (TCP calibration problem is of great importance for a number of industrial applications, and it is well known both in theory and in practice. Although various techniques have been proposed for solving this problem, they mostly require tool jogging or long processing time, both of which affect process performance by extending cycle time. This paper presents an innovative way of TCP calibration using a set of two cameras. The robot tool is placed in an area where images in two orthogonal planes are acquired using cameras. Using robust pattern recognition, even deformed tool can be identified on images, and information about its current position and orientation forwarded to control unit for calibration. Compared to other techniques, test results show significant reduction in procedure complexity and calibration time. These improvements enable more frequent TCP checking and recalibration during production, thus improving the product quality.

Five training sessions improves 3000 meter running performance.

Science.gov (United States)

Riiser, A; Ripe, S; Aadland, E

2015-12-01

The primary aim of the present study was to evaluate the effect of two weeks of endurance training on 3000-meter running performance. Secondary we wanted to assess the relationship between baseline running performance and change in running performance over the intervention period. We assigned 36 military recruits to a training group (N.=28) and a control group. The training group was randomly allocated to one of three sub-groups: 1) a 3000 meter group (test race); 2) a 4x4-minutes high-intensity interval group; 3) a continuous training group. The training group exercised five times over a two-week period. The training group improved its 3000 meter running performance with 50 seconds (6%) compared to the control group (P=0.003). Moreover, all sub-groups improved their performance by 37 to 73 seconds (4-8%) compared to the control group (Ptraining group. We conclude that five endurance training sessions improved 3000 meter running performance and the slowest runners achieved the greatest improvement in running performance.

Radiation damage, repopulation and cell recovery analysis of in vitro tumour cell megacolony culture data using a non-Poissonian cell repopulation TCP model

International Nuclear Information System (INIS)

Stavrev, P; Weldon, M; Warkentin, B; Stavreva, N; Fallone, B G

2005-01-01

The effects of radiation damage, tumour repopulation and cell sublethal damage repair and the possibility of extracting information about the model parameters describing them are investigated in this work. Previously published data on two different cultured cell lines were analysed with the help of a tumour control probability (TCP) model that describes tumour cell dynamics properly. Different versions of a TCP model representing the cases of full or partial cell recovery between fractions of radiation, accompanied by repopulation or no repopulation were used to fit the data and were ranked according to statistical criteria. The data analysis shows the importance of the linear-quadratic mechanism of cell damage for the description of the in vitro cell dynamics. In a previous work where in vivo data were analysed, the employment of the single hit model of cell kill and cell repopulation produced the best fit, while ignoring the quadratic term of cell damage in the current analysis leads to poor fits. It is also concluded that more experiments using different fractionation regimes producing diverse data are needed to help model analysis and better ranking of the models

MCNP Progress & Performance Improvements

Energy Technology Data Exchange (ETDEWEB)

Brown, Forrest B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bull, Jeffrey S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rising, Michael Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-04-14

Twenty-eight slides give information about the work of the US DOE/NNSA Nuclear Criticality Safety Program on MCNP6 under the following headings: MCNP6.1.1 Release, with ENDF/B-VII.1; Verification/Validation; User Support & Training; Performance Improvements; and Work in Progress. Whisper methodology will be incorporated into the code, and run speed should be increased.

Sodium bicarbonate improves swimming performance.

Science.gov (United States)

Lindh, A M; Peyrebrune, M C; Ingham, S A; Bailey, D M; Folland, J P

2008-06-01

Sodium bicarbonate ingestion has been shown to improve performance in single-bout, high intensity events, probably due to an increase in buffering capacity, but its influence on single-bout swimming performance has not been investigated. The effects of sodium bicarbonate supplementation on 200 m freestyle swimming performance were investigated in elite male competitors. Following a randomised, double blind counterbalanced design, 9 swimmers completed maximal effort swims on 3 separate occasions: a control trial (C); after ingestion of sodium bicarbonate (SB: NaHCO3 300 mg . kg (-1) body mass); and after ingestion of a placebo (P: CaCO3 200 mg . kg (-1) body mass). The SB and P agents were packed in gelatine capsules and ingested 90 - 60 min prior to each 200 m swim. Mean 200 m performance times were significantly faster for SB than C or P (1 : 52.2 +/- 4.7; 1 : 53.7 +/- 3.8; 1 : 54.0 +/- 3.6 min : ss; p bicarbonate were all elevated pre-exercise in the SB compared to C and P trials (p < 0.05). Post-200 m blood lactate concentrations were significantly higher following the SB trial compared with P and C (p < 0.05). It was concluded that SB supplementation can improve 200 m freestyle performance time in elite male competitors, most likely by increasing buffering capacity.

Do Leadership Changes Improve Electoral Performance?

NARCIS (Netherlands)

Helboe Pedersen, H.; Schumacher, G.; Cross, W.; Pilet, J.-B.

2015-01-01

Does changing the leader improve a party’s electoral performance? And does it matter who for electoral performance who selects the leader? We hypothesize that in parties with inclusive selectorates leadership change is beneficial because the competition for the leadership is more open, receives more

Bitumen nanocomposites with improved performance

KAUST Repository

Kosma, Vasiliki

2017-11-29

Bitumen-clay nanocomposite binders with styrene-butadienestyrene triblock copolymer, SBS, and combinations of SBS and crumb rubber (CR) with different CR/SBS ratios have been synthesized and characterized. In addition to the binder, samples containing the binder and concrete sand (with a weight ratio 1:9) were prepared. The modified binders were studied in terms of filler dispersion, storage stability, mechanical performance and water susceptibility. We demonstrate that the samples containing nanoclays consistently outperform those based only on the polymer additives. We also find that nanocomposite samples based on a combination of SBS and CR are best, since in addition to other improvements they show excellent storage stability. Our work shows that substituting CR with SBS as a bitumen additive and combining it with inexpensive nanoclays leads to new materials with enhanced performance and improved stability for practical asphalt applications.

Improving human performance: Industry factors influencing the ability to perform

OpenAIRE

Güera Massyn Romo

2013-01-01

Learning interventions and new technologies that aim to improve human performance must take cognisance of industry factors inhibiting human performance. The dynamic and fast pace nature of the Information and Communication Technologies (ICT) and the engineering industries do not lend themselves to proper skills planning and management. These industries experience real skills gaps, to some of which they contribute by themselves. This study reports on these performance-inhibiting factors such a...

Continuing education for performance improvement: a creative approach.

Science.gov (United States)

Collins, Patti-Ann; Hardesty, Ilana; White, Julie L; Zisblatt, Lara

2012-10-01

In an effort to improve patient safety and health care outcomes, continuing medical education has begun to focus on performance improvement initiatives for physician practices. Boston University School of Medicine's (BUSM) Continuing Nursing Education Accredited Provider Unit has begun a creative project to award nursing contact hours for nurses' participation in performance improvement activities. This column highlights its initial efforts. Copyright 2012, SLACK Incorporated.

WE-F-304-02: Recurrent HNC Treated with SBRT: TCP-Based Outcome Estimates

International Nuclear Information System (INIS)

Clump, D.

2015-01-01

Stereotactic Body Radiation Therapy (SBRT) was introduced clinically more than twenty years ago, and many subsequent publications have reported safety and efficacy data. The AAPM Working Group on Biological Effects of Hypofractionated Radiotherapy/SBRT (WGSBRT) extracted published treatment outcomes data from extensive literature searches to summarize and construct tumor control probability (TCP) and normal tissue complication probability (NTCP) models for six anatomical regions: Cranial, Head and Neck, Thoracic, Abdominal, Pelvic, and Spinal. In this session, we present the WGSBRT’s work for cranial sites, and recurrent head and neck cancer. From literature-based data and associated models, guidelines to aid with safe and effective hypofractionated radiotherapy treatment are being determined. Further, the ability of existing and proposed radiobiological models to fit these data is considered as to the ability to distinguish between the linear-quadratic and alternative radiobiological models such as secondary cell death from vascular damage, immunogenic, or bystander effects. Where appropriate, specific model parameters are estimated. As described in “The lessons of QUANTEC,” (1), lack of adequate reporting standards continues to limit the amount of useful quantitative information that can be extracted from peer-reviewed publications. Recommendations regarding reporting standards are considered, to enable such reviews to achieve more complete characterization of clinical outcomes. 1 Jackson A, Marks LB, Bentzen SM, Eisbruch A, Yorke ED, Ten Haken RK, Constine LS, Deasy JO. The lessons of QUANTEC: recommendations for reporting and gathering data on dose-volume dependencies of treatment outcome. Int J Radiat Oncol Biol Phys. 2010 Mar 1;76(3 Suppl):S155–60. Learning Objectives: Describe the techniques, types of cancer and dose schedules used in treating recurrent H&N cancers with SBRT List the radiobiological models that compete with the linear-quadratic model

WE-F-304-02: Recurrent HNC Treated with SBRT: TCP-Based Outcome Estimates

Energy Technology Data Exchange (ETDEWEB)

Clump, D. [University of Pittsburgh Medical Center (United States)

2015-06-15

Stereotactic Body Radiation Therapy (SBRT) was introduced clinically more than twenty years ago, and many subsequent publications have reported safety and efficacy data. The AAPM Working Group on Biological Effects of Hypofractionated Radiotherapy/SBRT (WGSBRT) extracted published treatment outcomes data from extensive literature searches to summarize and construct tumor control probability (TCP) and normal tissue complication probability (NTCP) models for six anatomical regions: Cranial, Head and Neck, Thoracic, Abdominal, Pelvic, and Spinal. In this session, we present the WGSBRT’s work for cranial sites, and recurrent head and neck cancer. From literature-based data and associated models, guidelines to aid with safe and effective hypofractionated radiotherapy treatment are being determined. Further, the ability of existing and proposed radiobiological models to fit these data is considered as to the ability to distinguish between the linear-quadratic and alternative radiobiological models such as secondary cell death from vascular damage, immunogenic, or bystander effects. Where appropriate, specific model parameters are estimated. As described in “The lessons of QUANTEC,” (1), lack of adequate reporting standards continues to limit the amount of useful quantitative information that can be extracted from peer-reviewed publications. Recommendations regarding reporting standards are considered, to enable such reviews to achieve more complete characterization of clinical outcomes. 1 Jackson A, Marks LB, Bentzen SM, Eisbruch A, Yorke ED, Ten Haken RK, Constine LS, Deasy JO. The lessons of QUANTEC: recommendations for reporting and gathering data on dose-volume dependencies of treatment outcome. Int J Radiat Oncol Biol Phys. 2010 Mar 1;76(3 Suppl):S155–60. Learning Objectives: Describe the techniques, types of cancer and dose schedules used in treating recurrent H&N cancers with SBRT List the radiobiological models that compete with the linear-quadratic model

Visuospatial training improves elementary students' mathematics performance.

Science.gov (United States)

Lowrie, Tom; Logan, Tracy; Ramful, Ajay

2017-06-01

Although spatial ability and mathematics performance are highly correlated, there is scant research on the extent to which spatial ability training can improve mathematics performance. This study evaluated the efficacy of a visuospatial intervention programme within classrooms to determine the effect on students' (1) spatial reasoning and (2) mathematics performance as a result of the intervention. The study involved grade six students (ages 10-12) in eight classes. There were five intervention classes (n = 120) and three non-intervention control classes (n = 66). A specifically designed 10-week spatial reasoning programme was developed collaboratively with the participating teachers, with the intervention replacing the standard mathematics curriculum. The five classroom teachers in the intervention programme presented 20 hr of activities aimed at enhancing students' spatial visualization, mental rotation, and spatial orientation skills. The spatial reasoning programme led to improvements in both spatial ability and mathematics performance relative to the control group who received standard mathematics instruction. Our study is the first to show that a classroom-based spatial reasoning intervention improves elementary school students' mathematics performance. © 2017 The British Psychological Society.

Comparison of how different feed phosphates affect performance, bone mineralization and phosphorus retention in broilers

Directory of Open Access Journals (Sweden)

Manel Hamdi

2017-12-01

Full Text Available The objective of this work was to evaluate the comparative P bio-avalability of different sources of phosphate based on their effects on animal performance, bones mineralization and mineral retention in broilers. To achieve this goal, two experiments were conducted. In Experiment 1, twenty diets were prepared including five different phosphorus sources, either mono-calcium phosphate (MCP or 4 different batches of di-calcium phosphate, to supplement non phytic P (NPP levels at 3.0, 3.5, 4.0 and 4.5 g/kg in the diets. In Experiment 2, three treatments were used: the low MCP diet was deficient in NPP (3.1 g/kg for the starter phase and 2.8 g/kg for the grower phase; the high MCP diet and the high TCP (tri-calcium phosphate diet included adequate levels of NPP (4.4-4.7 g/kg for the starter phase and 4.2-4.3 g/kg for the grower phase. Phytase was not added to experimental diets. Results of Exp. 1 indicated that an increase of NPP in the diet from 3.0 to 4.0 g/kg increased weight gain and feed intake between d 1 and d 21 (Trial 1. Alternatively, tibia weight and ash percentage at d 21 responded up to the level of 4.5 g/kg and showed significant difference with birds of the 4.0 g/kg NPP group. In Trial 2, chickens fed with the high MCP and TCP had improved growth performances and bone mineralization. No differences were observed on the P availability among different mineral P sources. A level of 4.5 g/kg, NPP is recommended when phytase is not included to maximize both performance and bone mineralization in broiler chickens up to d 21.

Improving creativity performance by short-term meditation

Science.gov (United States)

2014-01-01

Background One form of meditation intervention, the integrative body-mind training (IBMT) has been shown to improve attention, reduce stress and change self-reports of mood. In this paper we examine whether short-term IBMT can improve performance related to creativity and determine the role that mood may play in such improvement. Methods Forty Chinese undergraduates were randomly assigned to short-term IBMT group or a relaxation training (RT) control group. Mood and creativity performance were assessed by the Positive and Negative Affect Schedule (PANAS) and Torrance Tests of Creative Thinking (TTCT) questionnaire respectively. Results As predicted, the results indicated that short-term (30 min per day for 7 days) IBMT improved creativity performance on the divergent thinking task, and yielded better emotional regulation than RT. In addition, cross-lagged analysis indicated that both positive and negative affect may influence creativity in IBMT group (not RT group). Conclusions Our results suggested that emotion-related creativity-promoting mechanism may be attributed to short-term meditation. PMID:24645871

Glucocorticoids improve high-intensity exercise performance in humans

DEFF Research Database (Denmark)

Casuso, Rafael A; Melskens, Lars; Bruhn, Thomas

2014-01-01

It was investigated whether oral dexamethasone (DEX) administration improves exercise performance by reducing the initial rate of muscle fatigue development during dynamic exercise.......It was investigated whether oral dexamethasone (DEX) administration improves exercise performance by reducing the initial rate of muscle fatigue development during dynamic exercise....

Peer Mentors Can Improve Academic Performance

Science.gov (United States)

Asgari, Shaki; Carter, Frederick, Jr.

2016-01-01

The present study examined the relationship between peer mentoring and academic performance. Students from two introductory psychology classes either received (n = 37) or did not receive (n = 36) peer mentoring. The data indicated a consistent improvement in the performance (i.e., grades on scheduled exams) of the mentored group. A similar pattern…

Improving Process Heating System Performance v3

Energy Technology Data Exchange (ETDEWEB)

None

2016-04-11

Improving Process Heating System Performance: A Sourcebook for Industry is a development of the U.S. Department of Energy (DOE) Advanced Manufacturing Office (AMO) and the Industrial Heating Equipment Association (IHEA). The AMO and IHEA undertook this project as part of an series of sourcebook publications developed by AMO on energy-consuming industrial systems, and opportunities to improve performance. Other topics in this series include compressed air systems, pumping systems, fan systems, steam systems, and motors and drives

Partnering through Training and Practice to Achieve Performance Improvement

Science.gov (United States)

Lyons, Paul R.

2010-01-01

This article presents a partnership effort among managers, trainers, and employees to spring to life performance improvement using the performance templates (P-T) approach. P-T represents a process model as well as a method of training leading to performance improvement. Not only does it add to our repertoire of training and performance management…

The impact of multi-criteria performance measurement on business performance improvement

Directory of Open Access Journals (Sweden)

Fentahun Moges Kasie

2013-06-01

Full Text Available Purpose: The purpose of this paper is to investigate the relationship between multi-criteria performance measurement (MCPM practice and business performance improvement using the raw data collected from 33 selected manufacturing companies. In addition, it proposes modified MCPM model as an effective approach to improve business performance of manufacturing companies. Design/methodology/approach:Research paper. Primary and secondary data were collected using questionnaire survey, interview and observation of records. The methodology is to evaluate business performances of sampled manufacturing companies and the extent of utilization of crucial non-financial (lagging and non-financial (leading performance measures. The positive correlation between financial business performance and practice of MCPM is clearly shown using Pearson’s correlation coefficient analysis. Findings –This research paper indicates that companies which measure their performance using important financial and non-financial measures achieve better business performance. Even though certain companies are currently using non-financial measures, the researchers have learned that these financial measures were not integrated with each other, financial measures and strategic objectives. Research limitations/implications: The limitation of this paper is that the number of surveyed companies is small to make generalization and they are found in a single country. Further researches which incorporate a large number of companies from various developing nations are suggested to minimize the limitation of this research.Practical Implication: The paper shows that multi-dimensional performance measures with the inclusion of key leading indicator are essential to predict the future environment. But cost-accounting based financial measures are inadequate to do so. These are shown practically using Pearson’s correlation coefficient analysis. Originality/value: The significance of multi

Clinical performance improvement series. Classic CQI integrated with comprehensive disease management as a model for performance improvement.

Science.gov (United States)

Joshi, M S; Bernard, D B

1999-08-01

In recent years, health and disease management has emerged as an effective means of delivering, integrating, and improving care through a population-based approach. Since 1997 the University of Pennsylvania Health System (UPHS) has utilized the key principles and components of continuous quality improvement (CQI) and disease management to form a model for health care improvement that focuses on designing best practices, using best practices to influence clinical decision making, changing processes and systems to deploy and deliver best practices, and measuring outcomes to improve the process. Experience with 28 programs and more than 14,000 patients indicates significant improvement in outcomes, including high physician satisfaction, increased patient satisfaction, reduced costs, and improved clinical process and outcome measures across multiple diseases. DIABETES DISEASE MANAGEMENT: In three months a UPHS multidisciplinary diabetes disease management team developed a best practice approach for the treatment of all patients with diabetes in the UPHS. After the program was pilot tested in three primary care physician sites, it was then introduced progressively to additional practice sites throughout the health system. The establishment of the role of the diabetes nurse care managers (certified diabetes educators) was central to successful program deployment. Office-based coordinators ensure incorporation of the best practice protocols into routine flow processes. A disease management intranet disseminates programs electronically. Outcomes of the UPHS health and disease management programs so far demonstrate success across multiple dimensions of performance-service, clinical quality, access, and value. The task of health care leadership today is to remove barriers and enable effective implementation of key strategies, such as health and disease management. Substantial effort and resources must be dedicated to gain physician buy-in and achieve compliance. The

Performance improvement integration: a whole systems approach.

Science.gov (United States)

Page, C K

1999-02-01

Performance improvement integration in health care organizations is a challenge for health care leaders. Required for accreditation by the Joint Commission on Accreditation of Healthcare Organizations (Joint Commission), performance improvement (PI) can be designed as a sustainable model for performance to survive in a turbulent period. Central Baptist Hospital developed a model for PI that focused on strategy established by the leadership team, delineated responsibility through the organizational structure of shared governance, and accountability for outcomes evidenced through the organization's profitability. Such an approach integrated into the culture of the organization can produce positive financial margins, positive customer satisfaction, and commendations from the Joint Commission.

Chlorella vulgaris cultivation in sludge extracts from 2,4,6-TCP wastewater treatment for toxicity removal and utilization.

Science.gov (United States)

Wang, Lu; Chen, Xiurong; Wang, Hualin; Zhang, Yuying; Tang, Qingjie; Li, Jiahui

2017-02-01

Chlorella vulgaris was cultivated in different proportions of activated sludge extracts, which was from the treatment of the synthetic wastewater containing 2,4,6-trichlorophenol (2,4,6-TCP). The nutrients, total nitrogen (TN) and total phosphorus (TP), were removed over 45% and 90%, respectively. The maximum reduction amount of ecotoxicity and total organic carbon (TOC) occurred in the 100% sludge group on the 8th day (68%; 86.2 mg L -1 ). The variations of Excitation-emission matrix spectra (EEMs) and TOC indicated that extracellular organic matters (EOM) produced by algae led to TOC increase in the medium. The cell density was close to each other for groups with sludge extract proportion below 50%; sludge extracts (below 75% addition) had a stimulating effect on the accumulation of chlorophyll-a in per unit algal cell. Superoxide dismutase (SOD) variation demonstrated that C. vulgaris response positively to sludge extracts addition. Lipid content in C. vulgaris was up to its maximum value on the 8th day. Considering the performance on nutrients removal, toxicity reduction and algal growth, the optimal cultivation period for C. vulgaris before harvesting was around 8 days with sludge extracts proportion below 50%. Copyright © 2016 Elsevier Ltd. All rights reserved.

Managing Human Performance to Improve Nuclear Facility Operation

International Nuclear Information System (INIS)

2013-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world.' One way this objective is achieved is through the publication of a range of technical series. Two of these are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III.A.6 of the IAEA Statute, the safety standards establish 'standards of safety for protection of health and minimization of danger to life and property'. The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are written primarily in a regulatory style, and are binding on the IAEA for its own programmes. The principal users are the regulatory bodies in Member States and other national authorities. The IAEA Nuclear Energy Series comprises reports designed to encourage and assist R and D on, and application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia, and government officials, among others. This information is presented in guides, reports on technology status and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The IAEA Nuclear Energy Series complements the IAEA Safety Standards Series. IAEA Nuclear Energy Series No. NG-G-2.1, Managing Human Resources in the Field of Nuclear Energy, was published in 2009. In that publication, four interrelated objectives of the management of human resources were identified and discussed: ensuring that nuclear industry personnel have the necessary competence for their jobs; effectively organizing work activities; anticipating human resource needs; and monitoring and continually improving performance. This publication addresses the fourth objective and, in particular, summarizes good practices in the area of managing human performance

Performance improvement plan in customer technical services

International Nuclear Information System (INIS)

Lachambre, L.

1995-01-01

This presentation centred around the philosophy, goals, and initiatives associated with Gaz Metropolitain's performance improvement plan. Various aspects of the plan including customer surveys, new customer service policies, the creation of small working units, the decentralization of the Montreal service department, and customer-harmonized shift schedules were explored. Implementation of new service plans and contracts, the formation of improvement groups related to human resources, human resource and productivity management, leadership training, and the use of performance indicators were also explained

Training Attentional Control Improves Cognitive and Motor Task Performance.

Science.gov (United States)

Ducrocq, Emmanuel; Wilson, Mark; Vine, Sam; Derakshan, Nazanin

2016-10-01

Attentional control is a necessary function for the regulation of goal-directed behavior. In three experiments we investigated whether training inhibitory control using a visual search task could improve task-specific measures of attentional control and performance. In Experiment 1 results revealed that training elicited a near-transfer effect, improving performance on a cognitive (antisaccade) task assessing inhibitory control. In Experiment 2 an initial far-transfer effect of training was observed on an index of attentional control validated for tennis. The principal aim of Experiment 3 was to expand on these findings by assessing objective gaze measures of inhibitory control during the performance of a tennis task. Training improved inhibitory control and performance when pressure was elevated, confirming the mechanisms by which cognitive anxiety impacts performance. These results suggest that attentional control training can improve inhibition and reduce taskspecific distractibility with promise of transfer to more efficient sporting performance in competitive contexts.

Improving the environmental performance of biofuels with industrial symbiosis

International Nuclear Information System (INIS)

Martin, Michael; Eklund, Mats

2011-01-01

In the production of biofuels for transport many critics have argued about the poor energy efficiency and environmental performance of the production industries. Optimism is thus set on the production of second generation biofuels, while first generation biofuels continue to dominate worldwide. Therefore it is interesting to consider how the environmental performance of first generation biofuel industries can be improved. The field of industrial symbiosis offers many possibilities for potential improvements in the biofuel industry and theories from this research field are used in this paper to highlight how environmental performance improvements can be accomplished. This comes in the form of by-product synergies and utility synergies which can improve material and energy handling. Furthermore, the processes and products can gain increased environmental performance improvements by the adaption of a renewable energy system which will act as a utility provider for many industries in a symbiotic network. By-products may thereafter be upcycled through biogas production processes to generate both energy and a bio-fertilizer. A case study of an actual biofuel industrial symbiosis is also reviewed to provide support for these theories. -- Highlights: → By-product and utility synergies may improve the production processes of biofuel industries for reduced energy consumption and improved environmental performance. → Upcycling tenants can make use of wastes to upgrade waste to a valuable product and/or energy source. → Energy systems for biofuel production have a large influence on the performance of biofuel industries.

Techniques for Improving Spelling Performance.

Science.gov (United States)

Saylor, Paul

Improving spelling performance of college students is a question of insuring that the correct information is in long-term memory and readily retrievable. Any system of spelling instruction should recognize the capacity limits of the sensory register and short-term memory; provide for identification of and concentration on the distinctive features…

Efficacy of a Template Creation Approach for Performance Improvement

Science.gov (United States)

Lyons, Paul R.

2011-01-01

This article presents the training and performance improvement approach, performance templates (P-T), and provides empirical evidence to support the efficacy of P-T. This approach involves a partnership among managers, trainers, and employees in the creation, use, and improvement of guides to affect the performance of critical tasks in the…

42 CFR 460.132 - Quality assessment and performance improvement plan.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Quality assessment and performance improvement plan... assessment and performance improvement plan. (a) Basic rule. A PACE organization must have a written quality assessment and performance improvement plan. (b) Annual review. The PACE governing body must review the plan...

Does Education Reform Improve Job Performance

National Research Council Canada - National Science Library

Wenger, J

2003-01-01

.... Examining military personnel data, which is a highly detailed source of information for recent high school graduate's performance, we find that the quality of Navy recruits improved during the 1990...

Improving Steam System Performance: A Sourcebook for Industry

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

The sourcebook is a reference for industrial steam system users, outlining opportunities to improve steam system performance. This Sourcebook is designed to provide steam system users with a reference that describes the basic steam system components, outlines opportunities for energy and performance improvements, and discusses the benefits of a systems approach in identifying and implementing these improvement opportunities. The Sourcebook is divided into the following three main sections: Section 1: Steam System Basics--For users unfamiliar with the basics of steam systems, or for users seeking a refresher, a brief discussion of the terms, relationships, and important system design considerations is provided. Users already familiar with industrial steam system operation may want to skip this section. This section describes steam systems using four basic parts: generation, distribution, end use, and recovery. Section 2: Performance Improvement Opportunities--This section discusses important factors that should be considered when industrial facilities seek to improve steam system performance and to lower operating costs. This section also provides an overview of the finance considerations related to steam system improvements. Additionally, this section discusses several resources and tools developed by the U. S. Department of Energy's (DOE) BestPractices Steam Program to identify and assess steam system improvement opportunities. Section 3: Programs, Contacts, and Resources--This section provides a directory of associations and other organizations involved in the steam system marketplace. This section also provides a description of the BestPractices Steam Program, a directory of contacts, and a listing of available resources and tools, such as publications, software, training courses, and videos.

Goals and experience of performance improvement

Energy Technology Data Exchange (ETDEWEB)

Tan, H. [CNNO, CNNP, Nuclear Power Operations Management Co., Ltd. (China)

2015-07-01

Performance improvement was achieved by reasonable arrangement of planned window for related work and optimization of time for important maintenance items, outage quality and duration. Unplanned output loss has been reduced through routine unit management and improvements to both personnel skill and equipment reliability. Planned power generation loss is reduced by controlling planned duration and quality of forced shutdowns and outages, to ensure safe and stable plant operation.

A Pseudomonas putida Strain Genetically Engineered for 1,2,3-Trichloropropane Bioremediation

OpenAIRE

Samin, Ghufrana; Pavlova, Martina; Arif, M. Irfan; Postema, Christiaan P.; Damborsky, Jiri; Janssen, Dick B.

2014-01-01

1,2,3-Trichloropropane (TCP) is a toxic compound that is recalcitrant to biodegradation in the environment. Attempts to isolate TCP-degrading organisms using enrichment cultivation have failed. A potential biodegradation pathway starts with hydrolytic dehalogenation to 2,3-dichloro-1-propanol (DCP), followed by oxidative metabolism. To obtain a practically applicable TCP-degrading organism, we introduced an engineered haloalkane dehalogenase with improved TCP degradation activity into the DCP...

Improving engineering performance by utilizing process indicators

International Nuclear Information System (INIS)

Roberts, T.E.

1992-01-01

The purpose of the work discussed in this paper was to develop engineering performance indicators used to facilitate improvement to the technical quality, cost-effectiveness, and delivery of engineering products and service. This work was specifically tailored for engineering support products and service associated with operating Florida Power and Light Company (FP and L) nuclear plants. The engineering process for the development of plant change packages was reviewed to identify critical in-process activities. Because each engineering project usually deals with a specific component or plant system, the different tasks are usually technically unique and of varying magnitudes. Although each engineering product may employ different analytical techniques or industry code requirements, several activities in documenting the engineering design process are generic. The quality of performance in these activities can be monitored analogously to the steps in a manufacturing process. This concept builds quality concepts into the package in lieu of inspecting package quality at the end of the process. The work has resulted in a valuable self-assessment tool that serves as a basis for engineering process improvements. The indicators are published in a semi-yearly performance report for FP and L contractors as well as FP and L in-house engineering work. Contracts have been set up to base fees on meeting targets established for the performance report. The ability to meet performance targets continues to improve

Impeller inlet geometry effect on performance improvement for centrifugal pumps

International Nuclear Information System (INIS)

Luo, Xianwu; Zhang, Yao; Peng, Junqi; Xu, Hongyuan; Yu, Weiping

2008-01-01

This research treats the effect of impeller inlet geometry on performance improvement for a boiler feed pump, who is a centrifugal pump having specific speed of 183 m.m 3 min -1 .min -1 and close type impeller with exit diameter of 450 mm. The hydraulic performance and cavitation performance of the pump have been tested experimentally. In order to improve the pump, five impellers have been considered by extending the blade leading edge or applying much larger blade angle at impeller inlet compared with the original impeller. The 3-D turbulent flow inside those pumps has been analyzed basing on RNG k-ε turbulence model and VOF cavitation model. It is noted that the numerical results are fairly good compared with the experiments. Based on the experimental test and numerical simulation, the following conclusions can be drawn: (1) Impeller inlet geometry has important influence on performance improvement in the case of centrifugal pump. Favorite effects on performance improvement have been achieved by both extending the blade leading edge and applying much larger blade angle at impeller inlet: (2) It is suspected that the extended leading edge have favorite effect for improving hydraulic performance, and the much larger blade angle at impeller inlet have favorite effect for improving cavitation performance for the test pump: (3) Uniform flow upstream of impeller inlet is helpful for improving cavitation performance of the pump

Global Journal of Engineering Science and Researches

OpenAIRE

Prof. Rama Prabha K P; Prof. Jayanthi R

2016-01-01

Inside wireless LAN, access point always sends long term TCP packets first followed by short term TCP packets. Due to this, there is unfairness for short term packets. In this paper, we come up with a novel approach to address this issue using a priority based scheme and URG (urgent) flag in TCP header. At the same time round robin mechanism is used for non-priority based short term TCP packets which not only improves throughput of the network and provides fairness but also avoids TCP from im...

Ethernet image communication performance in a multimodal PACS network

International Nuclear Information System (INIS)

Lou, S.L.; Valentino, D.J.; Chan, K.K.; Huang, H.K.

1989-01-01

The authors have evaluated the performance of an Ethernet network in a multimodal picture archiving and communications system (PACS) environment. The study included measurements between Sun workstations and PC- AT computers running communication software at the TCP level. First they initiated image transfers between two workstations, a server and a client. Next, they successively added clients to transfer images to the server and they measured degradation in network performance. Finally, they initiated image transfers between pairs of workstations and again measured performance degradation. The results of the authors' experiments indicate that Ethernet is suitable for image communication only in limited network situations. They discuss how to maximize network performance given these constraints

Cysteine modified polyaniline films improve biocompatibility for two cell lines

Energy Technology Data Exchange (ETDEWEB)

Yslas, Edith I., E-mail: eyslas@exa.unrc.edu.ar [Departamento de Biología Molecular, Universidad Nacional de Río Cuarto, Agencia Postal Nro3, X580BYA Río Cuarto (Argentina); Cavallo, Pablo; Acevedo, Diego F.; Barbero, César A. [Departamento de Química, Universidad Nacional de Río Cuarto, Agencia Postal Nro3, X580BYA Río Cuarto (Argentina); Rivarola, Viviana A. [Departamento de Biología Molecular, Universidad Nacional de Río Cuarto, Agencia Postal Nro3, X580BYA Río Cuarto (Argentina)

2015-06-01

This work focuses on one of the most exciting application areas of conjugated conducting polymers, which is cell culture and tissue engineering. To improve the biocompatibility of conducting polymers we present an easy method that involves the modification of the polymer backbone using L-cysteine. In this publication, we show the synthesis of polyaniline (PANI) films supported onto Polyethylene terephthalate (PET) films, and modified using cysteine (PANI-Cys) in order to generate a biocompatible substrate for cell culture. The PANI-Cys films are characterized by Fourier Transform infrared and UV–visible spectroscopy. The changes in the hydrophilicity of the polymer films after and before the modification were tested using contact angle measurements. After modification the contact angle changes from 86° ± 1 to 90° ± 1, suggesting a more hydrophylic surface. The adhesion properties of LM2 and HaCaT cell lines on the surface of PANI-Cys films in comparison with tissue culture plastic (TCP) are studied. The PANI-Cys film shows better biocompatibility than PANI film for both cell lines. The cell morphologies on the TCP and PANI-Cys film were examined by florescence and Atomic Force Microscopy (AFM). Microscopic observations show normal cellular behavior when PANI-Cys is used as a substrate of both cell lines (HaCaT and LM2) as when they are cultured on TCP. The ability of these PANI-Cys films to support cell attachment and growth indicates their potential use as biocompatible surfaces and in tissue engineering. - Highlights: • A new surface PANI-Cys was produced on films of polyethylene terephthalate. • The relationship between surface characteristics and biocompatibility is analyzed. • The PANI-Cys film presents good biocompatibility for two cell lines.

Ethernet TCP/IP based building energy management system in a university campus in Saudi Arabia

Energy Technology Data Exchange (ETDEWEB)

Jomoah, Ibrahim M. [Department of Industrial Engineering, King Abdulaziz University Jeddah-21589 (Saudi Arabia); Kumar, R. Sreerama; Abdel-Shafi, Nabil Yassien [Saudi Electricity Company Chair for DSM and EE, Vice Presidency for Projects, King Abdulaziz University Jeddah 21589 (Saudi Arabia); Al-Abdulaziz, Abdulaziz Uthman M.; Obaid, Ramzy R. [Department of Electrical and Computer Engineering, King Abdulaziz University Jeddah-21589 (Saudi Arabia)

2013-07-01

This paper investigates the effectiveness of the Building Energy Management System (BMS) installed in the typical buildings in the main campus of King Abdulaziz University, Jeddah, in Saudi Arabia. As the domestic electricity and hence the oil consumption in Saudi Arabia is increasing at a very alarming rate compared to the other countries in the world, it is of paramount importance to resort to urgent measures in various industrial, commercial and residential sectors in the country to implement energy conservation measures. The major electrical load in the buildings in the University corresponds to air-handling units and lighting. If the Hajj period, during which millions of pilgrims visit Holy Makah, coincides with the summer, the electricity demand in the country further increases. Considering these issues, the university has taken initiatives to minimize energy consumption in the campuses through the various energy conservation measures. Towards this end, BMS is installed in a few of the typical classrooms and office buildings utilizing the existing campus Ethernet TCP/IP. The data analysis is performed over the period from April to September as it is the peak load period due to summer season. The effectiveness of the BMS in the minimization of the energy consumption in these buildings is established by comparing the results of data analysis with BMS against those before the installation of BMS over the peak period. The investigations reveal that appreciable saving in energy consumption can be achieved with the installation of BMS, the magnitude being dependent upon factors such as building characteristics, type of building, its utilization and period of use.

Improving co-running program’s performance on CMP

Directory of Open Access Journals (Sweden)

Tian Dawei

2017-01-01

Full Text Available Chip multi-processor (CMP has become the most common processor in the current cluster and desktop computer, and it is also the current development direction. On CMP, programs usually co-running with each other. However, programs commonly interfere with each other. Some time the interference takes big effect, which cause serious drop down of performance. In order to avoid the serious performance interference, programs should be scheduled reasonably to different socket to improve the program’s performance and system’s utilization. In this paper we propose a new scheduling method to realize a more reasonable scheduling. We do not only consider the LLC miss rate, but also consider the LLC reference of the programs. By the information of LLC reference and LLC miss rate, we schedule programs to different sockets, which realize a reasonable scheduling. The experiment result show that making use of the scheduling method proposed by our paper, program’s performance can improve 4%, because the performance improve is realized by on-chip resource, which is a big contribution.

Perceptual learning improves visual performance in juvenile amblyopia.

Science.gov (United States)

Li, Roger W; Young, Karen G; Hoenig, Pia; Levi, Dennis M

2005-09-01

To determine whether practicing a position-discrimination task improves visual performance in children with amblyopia and to determine the mechanism(s) of improvement. Five children (age range, 7-10 years) with amblyopia practiced a positional acuity task in which they had to judge which of three pairs of lines was misaligned. Positional noise was produced by distributing the individual patches of each line segment according to a Gaussian probability function. Observers were trained at three noise levels (including 0), with each observer performing between 3000 and 4000 responses in 7 to 10 sessions. Trial-by-trial feedback was provided. Four of the five observers showed significant improvement in positional acuity. In those four observers, on average, positional acuity with no noise improved by approximately 32% and with high noise by approximately 26%. A position-averaging model was used to parse the improvement into an increase in efficiency or a decrease in equivalent input noise. Two observers showed increased efficiency (51% and 117% improvements) with no significant change in equivalent input noise across sessions. The other two observers showed both a decrease in equivalent input noise (18% and 29%) and an increase in efficiency (17% and 71%). All five observers showed substantial improvement in Snellen acuity (approximately 26%) after practice. Perceptual learning can improve visual performance in amblyopic children. The improvement can be parsed into two important factors: decreased equivalent input noise and increased efficiency. Perceptual learning techniques may add an effective new method to the armamentarium of amblyopia treatments.

Impeller inlet geometry effect on performance improvement for centrifugal pumps

Energy Technology Data Exchange (ETDEWEB)

Luo, Xianwu; Zhang, Yao; Peng, Junqi; Xu, Hongyuan [Tsinghua University, Beijing (China); Yu, Weiping [Zhejiang Pump Works, Zhejiang (China)

2008-10-15

This research treats the effect of impeller inlet geometry on performance improvement for a boiler feed pump, who is a centrifugal pump having specific speed of 183 m.m{sup 3}min{sup -1}.min{sup -1} and close type impeller with exit diameter of 450 mm. The hydraulic performance and cavitation performance of the pump have been tested experimentally. In order to improve the pump, five impellers have been considered by extending the blade leading edge or applying much larger blade angle at impeller inlet compared with the original impeller. The 3-D turbulent flow inside those pumps has been analyzed basing on RNG k-{epsilon} turbulence model and VOF cavitation model. It is noted that the numerical results are fairly good compared with the experiments. Based on the experimental test and numerical simulation, the following conclusions can be drawn: (1) Impeller inlet geometry has important influence on performance improvement in the case of centrifugal pump. Favorite effects on performance improvement have been achieved by both extending the blade leading edge and applying much larger blade angle at impeller inlet: (2) It is suspected that the extended leading edge have favorite effect for improving hydraulic performance, and the much larger blade angle at impeller inlet have favorite effect for improving cavitation performance for the test pump: (3) Uniform flow upstream of impeller inlet is helpful for improving cavitation performance of the pump

Sci—Fri PM: Topics — 04: What if bystander effects influence cell kill within a target volume? Potential consequences of dose heterogeneity on TCP and EUD on intermediate risk prostate patients

Energy Technology Data Exchange (ETDEWEB)

Balderson, M.J.; Kirkby, C. [Department of Physics and Astronomy, University of Calgary, Calgary, Alberta (Canada); Department of Medical Physics, Tom Baker Cancer Centre, Calgary, Alberta (Canada); Department of Medical Physics, Jack Ady Cancer Centre, Lethbridge, Alberta (Canada)

2014-08-15

In vitro evidence has suggested that radiation induced bystander effects may enhance non-local cell killing which may influence radiotherapy treatment planning paradigms. This work applies a bystander effect model, which has been derived from published in vitro data, to calculate equivalent uniform dose (EUD) and tumour control probability (TCP) and compare them with predictions from standard linear quadratic (LQ) models that assume a response due only to local absorbed dose. Comparisons between the models were made under increasing dose heterogeneity scenarios. Dose throughout the CTV was modeled with normal distributions, where the degree of heterogeneity was then dictated by changing the standard deviation (SD). The broad assumptions applied in the bystander effect model are intended to place an upper limit on the extent of the results in a clinical context. The bystander model suggests a moderate degree of dose heterogeneity yields as good or better outcome compared to a uniform dose in terms of EUD and TCP. Intermediate risk prostate prescriptions of 78 Gy over 39 fractions had maximum EUD and TCP values at SD of around 5Gy. The plots only dropped below the uniform dose values for SD ∼ 10 Gy, almost 13% of the prescribed dose. The bystander model demonstrates the potential to deviate from the common local LQ model predictions as dose heterogeneity through a prostate CTV is varies. The results suggest the potential for allowing some degree of dose heterogeneity within a CTV, although further investigations of the assumptions of the bystander model are warranted.

Sci—Fri PM: Topics — 04: What if bystander effects influence cell kill within a target volume? Potential consequences of dose heterogeneity on TCP and EUD on intermediate risk prostate patients

International Nuclear Information System (INIS)

Balderson, M.J.; Kirkby, C.

2014-01-01

In vitro evidence has suggested that radiation induced bystander effects may enhance non-local cell killing which may influence radiotherapy treatment planning paradigms. This work applies a bystander effect model, which has been derived from published in vitro data, to calculate equivalent uniform dose (EUD) and tumour control probability (TCP) and compare them with predictions from standard linear quadratic (LQ) models that assume a response due only to local absorbed dose. Comparisons between the models were made under increasing dose heterogeneity scenarios. Dose throughout the CTV was modeled with normal distributions, where the degree of heterogeneity was then dictated by changing the standard deviation (SD). The broad assumptions applied in the bystander effect model are intended to place an upper limit on the extent of the results in a clinical context. The bystander model suggests a moderate degree of dose heterogeneity yields as good or better outcome compared to a uniform dose in terms of EUD and TCP. Intermediate risk prostate prescriptions of 78 Gy over 39 fractions had maximum EUD and TCP values at SD of around 5Gy. The plots only dropped below the uniform dose values for SD ∼ 10 Gy, almost 13% of the prescribed dose. The bystander model demonstrates the potential to deviate from the common local LQ model predictions as dose heterogeneity through a prostate CTV is varies. The results suggest the potential for allowing some degree of dose heterogeneity within a CTV, although further investigations of the assumptions of the bystander model are warranted

Effectively managing nuclear risk through human performance improvement

International Nuclear Information System (INIS)

Coe, R.P.

2004-01-01

Full text: The US commercial nuclear industry has just completed an outstanding decade of plant performance. Safety levels and electric production are at unprecedented high levels and continue to exceed even high industry goals. Nuclear energy continues to keep the highest priority on performance improvement programs and highly trained/qualified people that maintain its record setting safety and reliability of operations. While the industry has maintained a consistently high level of performance, the advent of deregulation and the consolidation of NPP ownership, as well as the current climate of concern about both rising energy costs and availability of power, has raised the standard for nuclear energy's level of competitiveness in today's market place. The resulting challenge is how to more effectively manage risk and improve performance even further in a generally high performing organization. Newer technology and more training by themselves are not the answer. Rather, the answer will lie in the human side of the organization and management's ability to tap into the unused potential of employee commitment and productivity. It is people who offer the greatest potential for organizational success. Given the fact that human performance has been demonstrated to yield higher rates of return than physical capital, it makes good business sense to determine how to encourage the behaviors in the workplace to manage the risk that will accompany efforts to boost the nuclear industry to new heights of excellence. This means effectively developing a performance improvement culture through identifying measurable performance indicators and determining how behaviors can best be influenced to improve those indicators. It also means seeing a culture of performance improvement and risk management as a strategic planning tool rather than a solution to a particular problem. One of the most effective ways to develop this culture of performance improvement and effectively managing risk

Radiobiological analysis of the field in field technique in breast cancer radiotherapy treatments

Energy Technology Data Exchange (ETDEWEB)

Medel B, E.; Vasquez R, M. A. [IMSS, Centro Medico Nacional Manuel Avila Camacho, Calle 2 Nte. 2004, Barrio de San Francisco, 72090 Puebla, Pue. (Mexico); Tejeda M, G., E-mail: marcosalivasquez@gmail.com [Benemerita Universidad Autonoma de Puebla, Facultad de Ciencias Fisico Matematicas, Av. San Claudio y 18 Sur, Ciudad Universitaria, 72570 Puebla, Pue. (Mexico)

2015-10-15

Full text: In vivo dosimetry was performed in 6 unilateral breast cancer patients treated with external beam radiation therapy in order to evaluate the dose calculated by the radiotherapy treatment planning system (Xi O, ELEKTA). Results show a maximum difference of 0.473 Gy between the dose calculated by the treatment planning system and the dose measured in vivo using solid state detectors. Based on the DVHs statistics, tumor control probability (Tcp) was obtained using the Target-Poisson model, with the following Tcp parameters: α=0.288/Gy, α{sub s}pread= 0.13 and α/β=4.9 Gy. Tcp average obtained for the Clinical Tumor Volume (Ctv) is 35.1% and for Supra Clavicle Volume (Scv) is 35.345%. Finally using Lyman model Normal Tissue Complication Probability (Ntcp) was obtained for the following endpoints: contralateral breast fibrosis, lung radiation pneumonitis and heart pericarditis. Nonetheless the Ntcp values are not high; the improvement of the Tcp based on this plan makes Ntcp for lung radiation pneumonitis reach the 100% of probability in some cases. (Author)

42 CFR 494.110 - Condition: Quality assessment and performance improvement.

Science.gov (United States)

2010-10-01

... facility must maintain and demonstrate evidence of its quality improvement and performance improvement... RENAL DISEASE FACILITIES Patient Care § 494.110 Condition: Quality assessment and performance improvement. The dialysis facility must develop, implement, maintain, and evaluate an effective, data-driven...

The better model to predict and improve pediatric health care quality: performance or importance-performance?

Science.gov (United States)

Olsen, Rebecca M; Bryant, Carol A; McDermott, Robert J; Ortinau, David

2013-01-01

The perpetual search for ways to improve pediatric health care quality has resulted in a multitude of assessments and strategies; however, there is little research evidence as to their conditions for maximum effectiveness. A major reason for the lack of evaluation research and successful quality improvement initiatives is the methodological challenge of measuring quality from the parent perspective. Comparison of performance-only and importance-performance models was done to determine the better predictor of pediatric health care quality and more successful method for improving the quality of care provided to children. Fourteen pediatric health care centers serving approximately 250,000 patients in 70,000 households in three West Central Florida counties were studied. A cross-sectional design was used to determine the importance and performance of 50 pediatric health care attributes and four global assessments of pediatric health care quality. Exploratory factor analysis revealed five dimensions of care (physician care, access, customer service, timeliness of services, and health care facility). Hierarchical multiple regression compared the performance-only and the importance-performance models. In-depth interviews, participant observations, and a direct cognitive structural analysis identified 50 health care attributes included in a mailed survey to parents(n = 1,030). The tailored design method guided survey development and data collection. The importance-performance multiplicative additive model was a better predictor of pediatric health care quality. Attribute importance moderates performance and quality, making the importance-performance model superior for measuring and providing a deeper understanding of pediatric health care quality and a better method for improving the quality of care provided to children. Regardless of attribute performance, if the level of attribute importance is not taken into consideration, health care organizations may spend valuable

β-Tricalcium phosphate/poly(glycerol sebacate) scaffolds with robust mechanical property for bone tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Yang, Kai [The State Key Laboratory of Bioreactor Engineering, East China University of Science and Technology, Shanghai 200237 (China); Engineering Research Centre for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Zhang, Jing; Ma, Xiaoyu; Ma, Yifan; Kan, Chao [Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Engineering Research Centre for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Ma, Haiyan [Engineering Research Centre for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Li, Yulin, E-mail: yulinli@ecust.edu.cn [Engineering Research Centre for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Yuan, Yuan, E-mail: yyuan@ecust.edu.cn [The State Key Laboratory of Bioreactor Engineering, East China University of Science and Technology, Shanghai 200237 (China); Engineering Research Centre for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Liu, Changsheng, E-mail: liucs@ecust.edu.cn [The State Key Laboratory of Bioreactor Engineering, East China University of Science and Technology, Shanghai 200237 (China); Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Engineering Research Centre for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China)

2015-11-01

Despite good biocompatibility and osteoconductivity, porous β-TCP scaffolds still lack the structural stability and mechanical robustness, which greatly limit their application in the field of bone regeneration. The hybridization of β-TCP with conventional synthetic biodegradable PLA and PCL only produced a limited toughening effect due to the plasticity of the polymers in nature. In this study, a β-TCP/poly(glycerol sebacate) scaffold (β-TCP/PGS) with well interconnected porous structure and robust mechanical property was prepared. Porous β-TCP scaffold was first prepared with polyurethane sponge as template and then impregnated into PGS pre-polymer solution with moderate viscosity, followed by in situ heat crosslinking and freezing–drying process. The results indicated that the freezing–drying under vacuum process could further facilitate crosslinking of PGS and formation of Ca{sup 2+}–COO{sup −} ionic complexing and thus synergistically improved the mechanical strength of the β-TCP/PGS with in situ heat crosslinking. Particularly, the β-TCP/PGS with 15% PGS content after heat crosslinking at 130 °C and freezing–drying at − 50 °C under vacuum exhibited an elongation at break of 375 ± 25% and a compressive strength of 1.73 MPa, 3.7-fold and 200-fold enhancement compared to the β-TCP, respectively. After the abrupt drop of compressive load, the β-TCP/PGS scaffolds exhibited a full recovery of their original shape. More importantly, the PGS polymer in the β-TCP/PGS scaffolds could direct the biomineralization of Ca/P from particulate shape into a nanofiber-interweaved structure. Furthermore, the β-TCP/PGS scaffolds allowed for cell penetration and proliferation, indicating a good cytobiocompatibility. It is believed that β-TCP/PGS scaffolds have great potential application in rigid tissue regeneration. - Graphical abstract: Robust β-TCP/PGS porous scaffolds are developed by incorporation of poly(glycerol sebacate) (PGS, a flexible

Improved power performance assessment methods

Energy Technology Data Exchange (ETDEWEB)

Frandsen, S; Antoniou, I; Dahlberg, J A [and others

1999-03-01

The uncertainty of presently-used methods for retrospective assessment of the productive capacity of wind farms is unacceptably large. The possibilities of improving the accuracy have been investigated and are reported. A method is presented that includes an extended power curve and site calibration. In addition, blockage effects with respect to reference wind speed measurements are analysed. It is found that significant accuracy improvements are possible by the introduction of more input variables such as turbulence and wind shear, in addition to mean wind speed and air density. Also, the testing of several or all machines in the wind farm - instead of only one or two - may provide a better estimate of the average performance. (au)

The Genesis of a Trauma Performance Improvement Plan.

Science.gov (United States)

Pidgeon, Kristopher

2015-01-01

The purpose of this article is to assist the trauma medical and program director with developing a performance improvement and patients safety plan (PIPS), which is a required component of a successful trauma verification process by the American College of Surgeons. This article will review trauma quality standards and will describe in detail the required elements of a successful trauma center's performance improvement plan including a written comprehensive plan that outlines the mission and vision of the PIPS Program, authority of the PIPS Program, PIPS Program Committee reporting structure to the other hospital committees, list of required PIPS multidisciplinary team members, the operational components of the utilized data management system (trauma registry), list of indicators/audit filters, levels of review, peer determinations, corrective action plan with implementation, event resolution, and reevaluation. Strategies to develop a successful trauma performance improvement plan are presented.

Performance improvement using methodology: case study.

Science.gov (United States)

Harmelink, Stacy

2008-01-01

The department of radiology at St. Luke's Regional Medical Center in Sioux City, IA implemented meaningful workflow changes for reducing patient wait times and, at the same time, improved customer and employee satisfaction scores. Lean methodology and the 7 Deadly Wastes, along with small group interaction, was used to evaluate and change the process of a patient waiting for an exam in the radiology department. The most important key to the success of a performance improvement project is the involvement of staff.

Improving Manufacturing Performance in South Africa : Report of the ...

International Development Research Centre (IDRC) Digital Library (Canada)

1995-01-01

Improving Manufacturing Performance in South Africa : Report of the Industrial Strategy Project. Couverture du livre Improving Manufacturing Performance in South Africa. Author(s):. Avril Joffe, David Kaplan, Raphael Kaplinsky et David Lewis. Publisher(s):. UCT Press, CRDI. January 1, 1995. ISBN: Épuisé. 264 pages.

A New Method for Fabrication of Nanohydroxyapatite and TCP from the Sea Snail Cerithium vulgatum

Directory of Open Access Journals (Sweden)

O. Gunduz

2014-01-01

Full Text Available Biphasic bioceramic nanopowders of hydroxyapatite (HA and β-tricalcium phosphate (TCP were prepared from shells of the sea snail Cerithium vulgatum (Bruguière, 1792 using a novel chemical method. Calcination of the powders produced was carried out at varying temperatures, specifically at 400°C and 800°C, in air for 4 hours. When compared to the conventional hydrothermal transformation method, this chemical method is very simple, economic, due to the fact that it needs inexpensive and safe equipment, because the transformation of the aragonite and calcite of the shells into the calcium phosphate phases takes place at 80°C under the atmospheric pressure. The powders produced were determined using infrared spectroscopy (FT-IR, X-ray diffraction, and scanning electron microscopy (SEM. The features of the powders produced along with the fact of their biological origin qualify these powders for further consideration and experimentation to fabricate nanoceramic biomaterials.

Long-term changes in brain following continuous phencyclidine administration: An autoradiographic study using flunitrazepam, ketanserin, mazindol, quinuclidinyl benzilate, piperidyl-3,4-3H(N)-TCP, and AMPA receptor ligands

International Nuclear Information System (INIS)

Ellison, Gaylord; Keys, Alan; Noguchi, Kevin

1999-01-01

Phencyclidine induces a model psychosis which can persist for prolonged periods and presents a strong drug model of schizophrenia. When given continuously for several days to rats, phencyclidine and other N-methyl-D-aspartate (NMDA) antagonists induce neural degeneration in a variety of limbic structures, including retrosplenial cortex, hippocampus, septohippocampal projections, and piriform cortex. In an attempt to further clarify the mechanisms underlying these degeneration patterns, autoradiographic studies using a variety of receptor ligands were conducted in animals 21 days after an identical dosage of the continuous phencyclidine administration employed in the previous degeneration studies. The results indicated enduring alterations in a number of receptors: these included decreased piperidyl-3,4- 3 H(N)-TCP (TCP), flunitrazepam, and mazindol binding in many of the limbic regions in which degeneration has been reported previously. Quinuclidinyl benzilate and (AMPA) binding were decreased in anterior cingulate and piriform cortex, and in accumbens and striatum. Piperidyl-3,4- 3 H(N)-TCP binding was decreased in most hippocampal regions. Many of these long-term alterations would not have been predicted by prior studies of the neurotoxic effects of continuous phencyclidine, and these results do not suggest a unitary source for the neurotoxicity. Whereas retrosplenial cortex, the structure which degenerates earliest, showed minimal alterations, some of the most consistent, long term alterations were in structures which evidence no immediate signs of neural degeneration, such as anterior cingulate cortex and caudate nucleus. In these structures, some of the receptor changes appeared to develop gradually (they were not present immediately after cessation of drug administration), and thus were perhaps due to changed input from regions evidencing neurotoxicity. Some of these findings, particularly in anterior cingulate, may have implications for models of

Bacillus subtilis strain specificity affects performance improvement in broilers.

Science.gov (United States)

Rhayat, L; Jacquier, V; Brinch, K S; Nielsen, P; Nelson, A; Geraert, P-A; Devillard, E

2017-07-01

The study reports the effects on broiler performance of a newly isolated Bacillus subtilis strain, which is phylogenetically not closely related to already well-described strains of B. subtilis. In the first experiment, birds were reared in battery cages and exposed to C. perfringens. An increase in growth performance was observed with the strain when compared to the challenged animals. Three additional growth trials were conducted to 35 d of age, in different rearing conditions (genetic breeds, corn-soybean meal-based diet with or without animal proteins, in presence or absence of phytase, on fresh or used litter) to investigate the efficacy and the specificity of this new B. subtilis strain on the improvement of BWG and FCR of broilers in comparison with a B. subtilis-based DFM already used in the field. Whatever the rearing conditions tested, the new B. subtilis strain led to an average 3.2% improvement in feed conversion ratio or bodyweight. Comparatively, the commercial Bacillus strain significantly improved broiler performance in only one trial out of 3 with an average improvement reaching 2%. All these results indicate that this new B. subtilis strain consistently improves broiler performances. © 2017 Poultry Science Association Inc.

Performance Evaluation of IEEE 802.11ah Networks With High-Throughput Bidirectional Traffic.

Science.gov (United States)

Šljivo, Amina; Kerkhove, Dwight; Tian, Le; Famaey, Jeroen; Munteanu, Adrian; Moerman, Ingrid; Hoebeke, Jeroen; De Poorter, Eli

2018-01-23

So far, existing sub-GHz wireless communication technologies focused on low-bandwidth, long-range communication with large numbers of constrained devices. Although these characteristics are fine for many Internet of Things (IoT) applications, more demanding application requirements could not be met and legacy Internet technologies such as Transmission Control Protocol/Internet Protocol (TCP/IP) could not be used. This has changed with the advent of the new IEEE 802.11ah Wi-Fi standard, which is much more suitable for reliable bidirectional communication and high-throughput applications over a wide area (up to 1 km). The standard offers great possibilities for network performance optimization through a number of physical- and link-layer configurable features. However, given that the optimal configuration parameters depend on traffic patterns, the standard does not dictate how to determine them. Such a large number of configuration options can lead to sub-optimal or even incorrect configurations. Therefore, we investigated how two key mechanisms, Restricted Access Window (RAW) grouping and Traffic Indication Map (TIM) segmentation, influence scalability, throughput, latency and energy efficiency in the presence of bidirectional TCP/IP traffic. We considered both high-throughput video streaming traffic and large-scale reliable sensing traffic and investigated TCP behavior in both scenarios when the link layer introduces long delays. This article presents the relations between attainable throughput per station and attainable number of stations, as well as the influence of RAW, TIM and TCP parameters on both. We found that up to 20 continuously streaming IP-cameras can be reliably connected via IEEE 802.11ah with a maximum average data rate of 160 kbps, whereas 10 IP-cameras can achieve average data rates of up to 255 kbps over 200 m. Up to 6960 stations transmitting every 60 s can be connected over 1 km with no lost packets. The presented results enable the fine tuning

Three dimensional printed calcium phosphate and poly(caprolactone) composites with improved mechanical properties and preserved microstructure.

Science.gov (United States)

Vella, Joseph B; Trombetta, Ryan P; Hoffman, Michael D; Inzana, Jason; Awad, Hani; Benoit, Danielle S W

2018-03-01

Biphasic calcium phosphate scaffolds formed via three dimensional (3D) printing technology to exhibit porosity and chemical resorbability to promote osseointegration often lack the strength and toughness required to withstand loading in bone tissue engineering applications. Herein, sintering and CaP:poly(caprolactone) (PCL) composite formation were explored to improve 3D printed scaffold strength and toughness. Hydroxyapatite and α-tricalcium phosphate (α-TCP) biphasic calcium powders were printed using phosphoric acid binder, which generated monetite and hydroxyapatite scaffolds. Upon sintering, evolution of β-TCP was observed along with an increase in flexural strength and modulus but no effect on fracture toughness was observed. Furthermore, scaffold porosity increased with sintering. Additionally, two techniques of PCL composite formation were employed: postprint precipitation and 3D print codeposition to further augment scaffold mechanical properties. While both techniques significantly improved flexural strength, flexural modulus, and fracture toughness under most conditions explored, precipitation yielded more substantial increases in these properties, which is attributed to better continuity of the PCL phase. However, precipitation also compromised surface porosity due to PCL passivation of the calcium phosphate surface, which may subsequently hinder scaffold integration and bone regeneration. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 663-672, 2018. © 2017 Wiley Periodicals, Inc.

The People Side of Performance Improvement.

Science.gov (United States)

Gerson, Richard F.

1999-01-01

Discusses 11 keys to the personal side of performance improvement, including positive attitude, high self esteem and positive self-image, communication skills, lifelong learning, caring about other people, health and well-being, motivation, goal setting, relaxation, visualization, and personal value system. (LRW)

Cyber Security in Industrial Control Systems and SCADA Applications: Modbus TCP Protocol Example

Directory of Open Access Journals (Sweden)

Erdal IRMAK

2017-12-01

Full Text Available Electrical energy generation, transmission and distribution systems are evaluated in terms of national security dimension and defined as critical infrastructures. Monitoring and controlling of these systems is provided by Industrial Control Systems (ICS or Supervisory Control and Data Acquisition (SCADA systems. According to the latest advances in communication and internet technology, ICS/SCADA systems have started to become integrated with these systems. As a result of this situation, current or existing vulnerabilities in information and communication technology affect to SCADA systems directly. Therefore, this paper focuses on the cyber security of ICS/SCADA systems. It has been proved that the lack of authentication detected in Modbus TCP protocol, one of the most used in ICS/SCADA systems, can be exploited. In order to solve this security issue, a software is developed using the Python programming language for blocking or mitigating the cyber attacks. The proposed solution is subjected to several tests and results show that the attacks can be prevented successfully. Thus, it is considered that the proposed work will contribute to the security of ICS/SCADA systems and the industrial protocols using for communicating these systems.

Peer-to-peer computing for secure high performance data copying

International Nuclear Information System (INIS)

Hanushevsky, A.; Trunov, A.; Cottrell, L.

2001-01-01

The BaBar Copy Program (bbcp) is an excellent representative of peer-to-peer (P2P) computing. It is also a pioneering application of its type in the P2P arena. Built upon the foundation of its predecessor, Secure Fast Copy (sfcp), bbcp incorporates significant improvements performance and usability. As with sfcp, bbcp uses ssh for authentication; providing an elegant and simple working model--if you can ssh to a location, you can copy files to or from that location. To fully support this notion, bbcp transparently supports 3rd party copy operations. The program also incorporates several mechanism to deal with firewall security; the bane of P2P computing. To achieve high performance in a wide area network, bbcp allows a user to independently specify, the number of parallel network streams, tcp window size, and the file I/O blocking factor. Using these parameters, data is pipelined from source to target to provide a uniform traffic pattern that maximizes router efficiency. For improved recoverability, bbcp also keeps track of copy operations so that an operation can be restarted from the point of failure at a later time; minimizing the amount of network traffic in the event of a copy failure. Here, the authors present the bbcp architecture, it's various features, and the reasons for their inclusion

Peer-to-Peer Computing for Secure High Performance Data Copying

International Nuclear Information System (INIS)

2002-01-01

The BaBar Copy Program (bbcp) is an excellent representative of peer-to-peer (P2P) computing. It is also a pioneering application of its type in the P2P arena. Built upon the foundation of its predecessor, Secure Fast Copy (sfcp), bbcp incorporates significant improvements performance and usability. As with sfcp, bbcp uses ssh for authentication; providing an elegant and simple working model -- if you can ssh to a location, you can copy files to or from that location. To fully support this notion, bbcp transparently supports 3rd party copy operations. The program also incorporates several mechanism to deal with firewall security; the bane of P2P computing. To achieve high performance in a wide area network, bbcp allows a user to independently specify, the number of parallel network streams, tcp window size, and the file I/O blocking factor. Using these parameters, data is pipelined from source to target to provide a uniform traffic pattern that maximizes router efficiency. For improved recoverability, bbcp also keeps track of copy operations so that an operation can be restarted from the point of failure at a later time; minimizing the amount of network traffic in the event of a copy failure. Here, we preset the bbcp architecture, it's various features, and the reasons for their inclusion

Pre-task music improves swimming performance.

Science.gov (United States)

Smirmaul, B P; Dos Santos, R V; Da Silva Neto, L V

2015-12-01

The purpose of this study was to investigate the effects of pre-task music on swimming performance and other psychological variables. A randomized counterbalanced within-subjects (experimental and control condition) design was employed. Eighteen regional level male swimmers performed two 200-m freestyle swimming time trials. Participants were exposed to either 5 minutes of self-selected music (pre-task music condition) or 5 minutes of silence (control condition) and, after 1 minute, performed the swimming task. Swimming time was significantly shorter (-1.44%) in the pre-task music condition. Listening to pre-task music increased motivation to perform the swimming task, while arousal remained unchanged. While fatigue increased after the swimming task in both conditions, vigor, ratings of perceived exertion and affective valence were unaltered. It is concluded, for the first time, that pre-task music improves swimming performance.

Performance Improvement Quarterly. Volume 15, Number 1, 2002

National Research Council Canada - National Science Library

2002-01-01

Performance Improvement Quarterly (PIQ) is a peer-reviewed journal whose goal is to stimulate professional discussion in the field and to advance the discipline of performance technology through the publication of scholarly works...

Successful therapy with hemoperfusion and plasma exchange in acute 1,2,3-trichloropropane poisoning.

Science.gov (United States)

Liu, P; Liang, Y-G; Meng, Q-Y; Zhang, C-G; Wang, H-C; Zhang, X-G; Li, G; Liu, Z-Y; He, Y-Z

2012-05-01

1,2,3-trichloropropane (1,2,3-TCP) is commonly used as an intermediate in pesticide and an industrial specialty solvent. Acute 1,2,3-TCP poisoning is rare but a medical emergency. Sporadic cases of toxic hepatic injury from 1,2,3-TCP in humans have been reported. Liver is a target organ for 1,2,3-TCP toxicity, which may ensue in a short period after ingestion. A specific antidote against 1,2,3-TCP is not available. So it is important to distinguish that a patient with 1,2,3-TCP poisoning constitutes a medical emergency. In this case study, the poisoned patient's clinical condition and laboratory values improved gradually after she received hemoperfusion (HP) and plasma exchange, which indicated that the therapy with HP and plasma exchange were helpful in the treatment of 1,2,3-TCP poisoning.

Windows with improved energy performance

DEFF Research Database (Denmark)

Noyé, Peter Anders; Laustsen, Jacob Birck; Svendsen, Svend

2002-01-01

According to the Danish energy protocol, Energy 21, one of the goals with highest priority is to reduce the CO2-emission. Energy consumption for domestic heating is a major contributor to the CO2-emission; hence one of the primary efforts to reach the goal is by saving energy in the households...... performances. During the last 20 years the U-value of the glazing part of windows has been improved considerably, but the frame part has not followed the same development with respect to energy performance. Therefore an increasingly large part of the total heat loss through windows is relating to the frame...... part, for which reason, as far as energy efficiency and total economy are concerned, it has become more interesting to further develop frame structures. Traditionally, the energy performance of windows has primarily been characterised by the heat loss coefficient, U-value. However as the heat loss has...

Diseño e implementación de un algoritmo para translación de protocolo entre las normas IEC60870-5-104 y MODBUS TCP/IP

OpenAIRE

Feria Briceño, John Henry; Universidad Distrital Francisco José de Caldas

2015-01-01

Este artículo muestra los resultados del proceso de diseño, implementación y prueba de un algoritmo para hacer la translación de protocolo entre las normas IEC 60870-5-104 y MODBUS TCP/IP, éste modelo de algoritmos son de amplio uso en los procesos de supervisión y automatización en sub-estaciones eléctricas.

Improved iodine status is associated with improved mental performance of schoolchildren in Benin.

Science.gov (United States)

van den Briel, T; West, C E; Bleichrodt, N; van de Vijver, F J; Ategbo, E A; Hautvast, J G

2000-11-01

An adequate iodine supply in utero and shortly after birth is known to be crucial to an individual's physical and mental development. The question of whether iodine supplementation later in life can exert a favorable influence on the mental performance of iodine-deficient populations was addressed in various studies, but with contradictory results. The aim of this study was to examine the effect of an improvement in iodine status on mental and psychomotor performance of schoolchildren (7-11 y) who were moderately to severely iodine deficient. The study, which was originally planned as a double-blind, randomized, placebo-controlled intervention, was carried out in an iodine-deficient population of schoolchildren (n = 196) in northern Benin. As the population began to have access to iodized salt during the 1-y intervention period, the study population was split post hoc-on the basis of urinary iodine concentrations-into a group with improved iodine status and a group with unchanged iodine status. Changes in mental and psychomotor performance over the intervention period were compared. Children with increased urinary iodine concentrations had a significantly greater increase in performance on the combination of mental tests than did the group with no change in urinary iodine concentrations. An improvement in iodine status, rather than iodine status itself, determined mental performance in this population, which was initially iodine deficient. These findings suggest a "catch-up" effect in terms of mental performance.

High strength, biodegradable and cytocompatible alpha tricalcium phosphate-iron composites for temporal reduction of bone fractures.

Science.gov (United States)

Montufar, E B; Casas-Luna, M; Horynová, M; Tkachenko, S; Fohlerová, Z; Diaz-de-la-Torre, S; Dvořák, K; Čelko, L; Kaiser, J

2018-04-01

In this work alpha tricalcium phosphate (α-TCP)/iron (Fe) composites were developed as a new family of biodegradable, load-bearing and cytocompatible materials. The composites with composition from pure ceramic to pure metallic samples were consolidated by pulsed electric current assisted sintering to minimise processing time and temperature while improving their mechanical performance. The mechanical strength of the composites was increased and controlled with the Fe content, passing from brittle to ductile failure. In particular, the addition of 25 vol% of Fe produced a ceramic matrix composite with elastic modulus much closer to cortical bone than that of titanium or biodegradable magnesium alloys and specific compressive strength above that of stainless steel, chromium-cobalt alloys and pure titanium, currently used in clinic for internal fracture fixation. All the composites studied exhibited higher degradation rate than their individual components, presenting values around 200 μm/year, but also their compressive strength did not show a significant reduction in the period required for bone fracture consolidation. Composites showed preferential degradation of α-TCP areas rather than β-TCP areas, suggesting that α-TCP can produce composites with higher degradation rate. The composites were cytocompatible both in indirect and direct contact with bone cells. Osteoblast-like cells attached and spread on the surface of the composites, presenting proliferation rate similar to cells on tissue culture-grade polystyrene and they showed alkaline phosphatase activity. Therefore, this new family of composites is a potential alternative to produce implants for temporal reduction of bone fractures. Biodegradable alpha-tricalcium phosphate/iron (α-TCP/Fe) composites are promising candidates for the fabrication of temporal osteosynthesis devices. Similar to biodegradable metals, these composites can avoid implant removal after bone fracture healing, particularly in

Design aspects of PHWR for improved performance

International Nuclear Information System (INIS)

Das, M.

1989-01-01

The PHWR fuel bundle is elegantly simple in design consisting of only six components. The unique features of the design include high density natural UO 2 pellets, collapsible zircaloy cladding, no gas plenums and short (50 cm), simple bundle configuration. Over the last 20 years, considerable efforts have been expended and still being continued on development of analytical tools and computer codes generation of technical specifications tests and experimental studies type tests on prototype bundles irradiation of special documented fuel bundles in power reactors and monitoring and analysis of fuel performance. The knowledge thus gained has helped us to modify design requirements, relax technical specifications and to evolve new, improved designs. The PHWR fuel technology in India can now be considered as well proven but there is considerable scope for further improvements both in design and manufacturing. For example, in design, use of thinner wall cladding (to improve burn up) bundle design with graded elements, double dished pellet, improved coatings, use of MOX fuel etc. are being explored. On the manufacturing side emphasis need to be given on maintaining the quality, improvement on production and process control. The use of automation and advances in machine control techniques, for example, using micro processors can effectively contribute to improvements in quality, productivity and lowering of fuel fabrication costs. In this paper, the PHWR fuel design features, different fuel designs evolved, fuel specifications, influence of fabrication variables and future direction in improved fuel performance are discussed. (author) 9 refs., 7 figs

Mesoporous bioactive glass nanolayer-functionalized 3D-printed scaffolds for accelerating osteogenesis and angiogenesis

Science.gov (United States)

Zhang, Yali; Xia, Lunguo; Zhai, Dong; Shi, Mengchao; Luo, Yongxiang; Feng, Chun; Fang, Bing; Yin, Jingbo; Chang, Jiang; Wu, Chengtie

2015-11-01

The hierarchical microstructure, surface and interface of biomaterials are important factors influencing their bioactivity. Porous bioceramic scaffolds have been widely used for bone tissue engineering by optimizing their chemical composition and large-pore structure. However, the surface and interface of struts in bioceramic scaffolds are often ignored. The aim of this study is to incorporate hierarchical pores and bioactive components into the bioceramic scaffolds by constructing nanopores and bioactive elements on the struts of scaffolds and further improve their bone-forming activity. Mesoporous bioactive glass (MBG) modified β-tricalcium phosphate (MBG-β-TCP) scaffolds with a hierarchical pore structure and a functional strut surface (~100 nm of MBG nanolayer) were successfully prepared via 3D printing and spin coating. The compressive strength and apatite-mineralization ability of MBG-β-TCP scaffolds were significantly enhanced as compared to β-TCP scaffolds without the MBG nanolayer. The attachment, viability, alkaline phosphatase (ALP) activity, osteogenic gene expression (Runx2, BMP2, OPN and Col I) and protein expression (OPN, Col I, VEGF, HIF-1α) of rabbit bone marrow stromal cells (rBMSCs) as well as the attachment, viability and angiogenic gene expression (VEGF and HIF-1α) of human umbilical vein endothelial cells (HUVECs) in MBG-β-TCP scaffolds were significantly upregulated compared with conventional bioactive glass (BG)-modified β-TCP (BG-β-TCP) and pure β-TCP scaffolds. Furthermore, MBG-β-TCP scaffolds significantly enhanced the formation of new bone in vivo as compared to BG-β-TCP and β-TCP scaffolds. The results suggest that application of the MBG nanolayer to modify 3D-printed bioceramic scaffolds offers a new strategy to construct hierarchically porous scaffolds with significantly improved physicochemical and biological properties, such as mechanical properties, osteogenesis, angiogenesis and protein expression for bone tissue

Carbohydrate mouth rinse: does it improve endurance exercise performance?

Directory of Open Access Journals (Sweden)

Painelli Vitor

2010-08-01

Full Text Available Abstract It is well known that carbohydrate (CHO supplementation can improve performance in endurance exercises through several mechanisms such as maintenance of glycemia and sparing endogenous glycogen as well as the possibility of a central nervous-system action. Some studies have emerged in recent years in order to test the hypothesis of ergogenic action via central nervous system. Recent studies have demonstrated that CHO mouth rinse can lead to improved performance of cyclists, and this may be associated with the activation of brain areas linked to motivation and reward. These findings have already been replicated in other endurance modalities, such as running. This alternative seems to be an attractive nutritional tool to improve endurance exercise performance.

New software for improving performance in wind farm operations

Energy Technology Data Exchange (ETDEWEB)

Collins, Mark [Ekho for Wind (Canada)

2011-07-01

The performance of wind farms depends on multiple field and business systems. This makes operational planning difficult because of so many data being in separate systems, duplication of data and the impossibility of gathering all relevant data together in one place. The aim of this paper is to present a new software, Ekho for Wind, which helps improve performance in wind farm operations by providing features such as high level views, performance analysis, downtime tracking, quality data management and forecast generation. This new software provides operational intelligence which offers incentives for continuous improvement. Ekho for Wind can bring such benefits as maximization of generation, increased lifetime of assets, minimization of costs and increased profitability. This presentation introduced a new software for improving the performance of wind farms and the lifetime of assets, resulting in significant payback.

Do school inspections improve primary school performance?

OpenAIRE

Dinand Webbink; Rob Luginbuhl; I. de Wolf

2007-01-01

Inspectors from the Dutch Inspectorate of Education inspect primary schools, write inspection reports on each inspected school, and make recommendations as to how each school can improve. We test whether these inspections result in better school performance. Using a fixed-effects model, we find evidence that school inspections do lead to measurably better school performance. Our assessment of school performance is based on the Cito test scores of pupils in their final year of primary school. ...

A High Intensity Interval Training (HIIT)-Based Running Plan Improves Athletic Performance by Improving Muscle Power.

Science.gov (United States)

García-Pinillos, Felipe; Cámara-Pérez, Jose C; Soto-Hermoso, Víctor M; Latorre-Román, Pedro Á

2017-01-01

García-Pinillos, F, Cámara-Pérez, JC, Soto-Hermoso, VM, and Latorre-Román, PÁ. A High Intensity Interval Training (HIIT)-based running plan improves athletic performance by improving muscle power. J Strength Cond Res 31(1): 146-153, 2017-This study aimed to examine the effect of a 5-week high-intensity intermittent training (HIIT)-based running plan on athletic performance and to compare the physiological and neuromuscular responses during a sprint-distance triathlon before and after the HIIT period. Thirteen triathletes were matched into 2 groups: the experimental group (EG) and the control group (CG). The CG was asked to maintain their normal training routines, whereas the EG maintained only their swimming and cycling routines and modified their running routine. Participants completed a sprint-distance triathlon before (pretest) and after (posttest) the intervention period. In both pretest and posttest, the participants performed 4 jumping tests: before the race (baseline), postswim, postcycling, and postrun. Additionally, heart rate was monitored (HRmean), whereas rate of perceived exertion (RPE) and blood lactate accumulation (BLa) were registered after the race. No significant differences (p ≥ 0.05) between groups were found before HIIT intervention (at pretest). Significant group-by-training interactions were found in vertical jumping ability and athletic performance: the EG improved jumping performance (∼6-9%, p ≤ 0.05, effect size (ES) > 0.7), swimming performance (p = 0.013, ES = 0.438), and running time (p = 0.001, ES = 0.667) during the competition, whereas the CG remained unchanged (p ≥ 0.05, ES HIIT-based running plan combined with the high training volumes of these triathletes in swimming and cycling improved athletic performance during a sprint-distance triathlon. This improvement may be due to improved neuromuscular characteristics that were transferred into improved muscle power and work economy.

Improving access and equity in reducing cardiovascular risk: the Queensland Health model.

Science.gov (United States)

Ski, Chantal F; Vale, Margarite J; Bennett, Gary R; Chalmers, Victoria L; McFarlane, Kim; Jelinek, V Michael; Scott, Ian A; Thompson, David R

2015-02-16

To measure changes in cardiovascular risk factors among patients with coronary heart disease (CHD) and/or type 2 diabetes enrolled in a centralised statewide coaching program delivered by telephone and mail-out in the public health sector in Queensland. A population-based audit of cardiovascular risk factor data collected prospectively as part of The COACH (Coaching Patients On Achieving Cardiovascular Health) Program (TCP) delivered through Queensland Health's Health Contact Centre. 1962 patients with CHD and 707 patients with type 2 diabetes who completed TCP from 20 February 2009 to 20 June 2013, of whom 145 were Indigenous Australians. Changes in fasting lipids, fasting glucose, glycosylated haemoglobin levels, blood pressure, body weight, body mass index, smoking, alcohol consumption and physical activity, as measured at entry to and completion of the program. Statistically significant improvements in cardiovascular risk factor status, from entry to completion of the program, were found across all biomedical and lifestyle factors in patients with CHD and/or type 2 diabetes. For both diseases, improvements in serum lipids, blood glucose, smoking habit and alcohol consumption combined with increases in physical activity were the most notable findings. Similar differences were found in mean change scores in cardiovascular risk factors between Indigenous and non-Indigenous Queenslanders. A centralised statewide coaching program delivered by telephone and mail-out overcomes obstacles of distance and limited access to health services and facilitates a guideline-concordant decrease in cardiovascular risk.

Long-term changes in brain following continuous phencyclidine administration: An autoradiographic study using flunitrazepam, ketanserin, mazindol, quinuclidinyl benzilate, piperidyl-3,4-{sup 3}H(N)-TCP, and AMPA receptor ligands

Energy Technology Data Exchange (ETDEWEB)

Ellison, Gaylord; Keys, Alan; Noguchi, Kevin [Univ. of California Los Angeles, Dept. of Psychology, Los Angeles, CA (United States)

1999-05-01

Phencyclidine induces a model psychosis which can persist for prolonged periods and presents a strong drug model of schizophrenia. When given continuously for several days to rats, phencyclidine and other N-methyl-D-aspartate (NMDA) antagonists induce neural degeneration in a variety of limbic structures, including retrosplenial cortex, hippocampus, septohippocampal projections, and piriform cortex. In an attempt to further clarify the mechanisms underlying these degeneration patterns, autoradiographic studies using a variety of receptor ligands were conducted in animals 21 days after an identical dosage of the continuous phencyclidine administration employed in the previous degeneration studies. The results indicated enduring alterations in a number of receptors: these included decreased piperidyl-3,4-{sup 3}H(N)-TCP (TCP), flunitrazepam, and mazindol binding in many of the limbic regions in which degeneration has been reported previously. Quinuclidinyl benzilate and (AMPA) binding were decreased in anterior cingulate and piriform cortex, and in accumbens and striatum. Piperidyl-3,4-{sup 3}H(N)-TCP binding was decreased in most hippocampal regions. Many of these long-term alterations would not have been predicted by prior studies of the neurotoxic effects of continuous phencyclidine, and these results do not suggest a unitary source for the neurotoxicity. Whereas retrosplenial cortex, the structure which degenerates earliest, showed minimal alterations, some of the most consistent, long term alterations were in structures which evidence no immediate signs of neural degeneration, such as anterior cingulate cortex and caudate nucleus. In these structures, some of the receptor changes appeared to develop gradually (they were not present immediately after cessation of drug administration), and thus were perhaps due to changed input from regions evidencing neurotoxicity. Some of these findings, particularly in anterior cingulate, may have implications for models of

Framework for continuous performance improvement in small drinking water systems.

Science.gov (United States)

Bereskie, Ty; Haider, Husnain; Rodriguez, Manuel J; Sadiq, Rehan

2017-01-01

Continuous performance improvement (CPI) can be a useful approach to overcome water quality problems impacting small communities. Small drinking water systems (SDWSs) struggle to meet regulatory requirements and often lack the economic and human resource flexibility for immediate improvement. A CPI framework is developed to provide SDWS managers and operators an approach to gauge their current performance against similar systems and to track performance improvement from the implementation of the new technologies or innovations into the future. The proposed CPI framework incorporates the use of a water quality index (WQI) and functional performance benchmarking to evaluate and compare drinking water quality performance of an individual water utility against that of a representative benchmark. The results are then used to identify and prioritize the most vulnerable water quality indicators and subsequently identify and prioritize performance improvement strategies. The proposed CPI framework has been demonstrated using data collected from SDWSs in the province of Newfoundland and Labrador (NL), Canada and using the Canadian Council of Ministers of the Environment (CCME) WQI. Copyright © 2016 Elsevier B.V. All rights reserved.

Good practices for improved nuclear power plant performance

International Nuclear Information System (INIS)

1989-04-01

This report provides an overview of operational principles, practice and improvements which have contributed to good performance of eight selected world nuclear power stations. The IAEA Power Reactor Information System (PRIS) was used to identify a population of good performers. It is recognized that there are many other good performing nuclear power stations not included in this report. Specific criteria described in the introduction were used in selecting these eight stations. The information contained in this report was obtained by the staff from IAEA, Division of Nuclear Power. This was accomplished by visits to the stations and visits to a number of utility support groups and three independent organizations which provide support to more than one utility. The information in this report is intended as an aid for operating organizations to identify possible improvement initiatives to enhance plant performance. Figs and tabs

Improving Steam System Performance: A Sourcebook for Industry, Second Edition

Energy Technology Data Exchange (ETDEWEB)

None

2012-02-23

This sourcebook is designed to provide steam system users with a reference that describes the basic steam system components, outlines opportunities for energy and performance improvements, and discusses the benefits of a systems approach in identifying and implementing these improvement opportunities. The sourcebook is divided into three main sections: steam system basics, performance improvement opportunities, and where to find help.

Performance improvement of professional printing systems : from theory to practice

NARCIS (Netherlands)

Ezzeldin Mahdy Abdelmonem, M.

2012-01-01

Performance Improvement of Professional Printing Systems: from theory to practice Markets demand continuously for higher quality, higher speed, and more energy-efficient professional printers. In this thesis, control strategies have been developed to improve the performance of both professional

Hybrid control of bifurcation and chaos in stroboscopic model of Internet congestion control system

International Nuclear Information System (INIS)

Ding Dawei; Zhu Jie; Luo Xiaoshu

2008-01-01

Interaction between transmission control protocol (TCP) and random early detection (RED) gateway in the Internet congestion control system has been modelled as a discrete-time dynamic system which exhibits complex bifurcating and chaotic behaviours. In this paper, a hybrid control strategy using both state feedback and parameter perturbation is employed to control the bifurcation and stabilize the chaotic orbits embedded in this discrete-time dynamic system of TCP/RED. Theoretical analysis and numerical simulations show that the bifurcation is delayed and the chaotic orbits are stabilized to a fixed point, which reliably achieves a stable average queue size in an extended range of parameters and even completely eliminates the chaotic behaviour in a particular range of parameters. Therefore it is possible to decrease the sensitivity of RED to parameters. By using the hybrid strategy, we may improve the stability and performance of TCP/RED congestion control system significantly

Proposal for the award of a contract for the supply of TCP and TCS collimators for the LHC

CERN Document Server

2004-01-01

This document concerns the award of a contract for the supply of 40 TCP and TCS collimators for the LHC cleaning insertions. The Finance Committee is invited to agree to the negotiation of a contract with CERCA (FR), the lowest bidder, for the supply of 40 collimators for a total amount of 1 122 173 euros (1 718 720 Swiss francs), not subject to revision, with options for up to 11 collimators for an amount of up to 279 280 euros (427 745 Swiss francs), subject to revision for inflation from 1 January 2007, bringing the total amount to 1 401 453 euros (2 146 465 Swiss francs), subject to revision for inflation from 1 January 2007. The rate of exchange used is that stipulated in the tender.

Pandemic serotypes of Vibrio cholerae isolated from ships' ballast tanks and coastal waters: assessment of antibiotic resistance and virulence genes (tcpA and ctxA).

Science.gov (United States)

Dobbs, Fred C; Goodrich, Amanda L; Thomson, Frank K; Hynes, Wayne

2013-05-01

There is concern that ships' ballasting operations may disseminate Vibrio cholerae to ports throughout the world. Given evidence that the bacterium is indeed transported by ships, we isolated pandemic serotypes O1 and O139 from ballast tanks and characterized them with respect to antibiotic resistance and virulence genes ctxA and tcpA. We carried out concurrent studies with V. cholerae isolated from coastal waters. Of 284 isolates, 30 were serotype O1 and 59 were serotype O139. These serotypes were overrepresented in ballast tanks relative to the coastal waters sampled. All locations, whether coastal waters or ballast tanks, yielded samples from which serotype O1, O139, or both were isolated. There were three groups among the 62 isolates for which antibiotic characterization was conclusive: those exhibiting β-lactamase activity and resistance to at least one of the 12 antibiotics tested; those negative for β-lactamase but having antibiotic resistance; those negative for β-lactamase and registering no antibiotic resistance. When present, antibiotic resistance in nearly all cases was to ampicillin; resistance to multiple antibiotics was uncommon. PCR assays revealed that none of the isolates contained the ctxA gene and only two isolates, one O139 and one O1, contained the tcpA gene; both isolates originated from ballast water. These results support the bacteriological regulations proposed by the International Maritime Association for discharged ballast water.

Performances and improvement of copper-hydrazine complexation deoxidising resin

International Nuclear Information System (INIS)

Liu Fenfen; Zhang Hao; Sun Haijun; Liu Xiaojie

2012-01-01

Copper-hydrazine complexation deoxidising resin is tested to examine its performances including effluent water quality and capacity of deoxidisation. By the means of changing the resin type and regeneration, the deoxidising capacity of the resin can be improved to 13 times more than before. At the same time, physical performances of the resin are also greatly improved while maintaining its velocity of deoxidisation and effluent quality. (authors)

Recent technology on steam turbine performance improvement

International Nuclear Information System (INIS)

Hirada, M.; Watanabe, E.; Tashiro, H.

1991-01-01

Continuous efforts have been made to improve turbine efficiency by applying the latest aerodynamic technologies to meet the energy saving requirement. In recent years, there has been considerable improvement in the field of computational fluid dynamics and these new technologies have been applied to the new blade design for HP, IP and LP turbines. Experimental verification for the new blade in turbine tests has established the overall turbine performance improvement and the excellent correspondence of flow pattern to the predicted value. This paper introduces the latest design technologies for the newly developed high efficiency blade and the verification test results

EFECTO DE LOS OBSTÁCULOS TIPO POLIMERO RESINA EN RENDIMIENTO DE REDES TCP/IP/IEEE 802.11g MODO AD-HOC

OpenAIRE

Márquez Barriobero, David

2011-01-01

La investigación tiene como objetivo primordial el desarrollo de un modelo matemático para evaluar el efecto de los obstáculos de tipo polímero resina en el rendimiento de redes TCP/IP/IEEE 802.11g modo ad-hoc; esto con el propósito de establecer la relación existente entre el diámetro de los obstáculos de tipo polímero resina y el rendimiento de una red inalámbrica en modo ad-hoc, al transmitir datos vía protocolo FTP. El tipo de investigación es explicativa con un diseño experimental. Los t...

A Hybrid Data Compression Scheme for Improved VNC

Directory of Open Access Journals (Sweden)

Xiaozheng (Jane Zhang

2007-04-01

Full Text Available Virtual Network Computing (VNC has emerged as a promising technology in distributed computing environment since its invention in the late nineties. Successful application of VNC requires rapid data transfer from one machine to another over a TCP/IP network connection. However transfer of screen data consumes much network bandwidth and current data encoding schemes for VNC are far from being ideal. This paper seeks to improve screen data compression techniques to enable VNC over slow connections and present a reasonable speed and image quality. In this paper, a hybrid technique is proposed for improving coding efficiency. The algorithm first divides a screen image into pre-defined regions and applies encoding schemes to each area according to the region characteristics. Second, correlation of screen data in consecutive frames is exploited where multiple occurrences of similar image contents are detected. The improved results are demonstrated in a dynamic environment with various screen image types and desktop manipulation.

Clinical implications of alternative TCP models for nonuniform dose distributions

International Nuclear Information System (INIS)

Deasy, J. O.

1995-01-01

Several tumor control probability (TCP) models for nonuniform dose distributions were compared, including: (a) a logistic/inter-patient-heterogeneity model, (b) a probit/inter-patient-heterogeneity model, (c) a Poisson/radioresistant-strain/identical-patients model, (d) a Poisson/inter-patient-heterogeneity model and (e) a Poisson/intra-tumor- and inter-patient-heterogeneity model. The models were analyzed in terms of the probability of controlling a single tumor voxel (the voxel control probability, or VCP), as a function of voxel volume and dose. Alternatively, the VCP surface can be thought of as the effect of a small cold spot. The models based on the Poisson equation which include inter-patient heterogeneity ((d) and (e)) have VCP surfaces (VCP as a function of dose and volume) which have a threshold 'waterfall' shape: below the waterfall (in dose), VCP is nearly zero. The threshold dose decreases with decreasing voxel volume. However, models (a), (b), and (c) all show a high probability of controlling a voxel (VCP>50%) with very low dose (e.g., 1 Gy) if the voxel is small (smaller than about 10 -3 of the tumor volume). Model (c) does not have the waterfall shape at low volumes due to the assumption of patient uniformity and a neglect of the effect of the clonogens which are more radiosensitive (and more numerous). Models (a) and (b) deviate from the waterfall shape at low volumes due to numerical differences between the functions used and the Poisson function. Hence, the Possion models which include inter-patient heterogeneities ((d) and (e)) are more sensitive to the effects of small cold spots than the other models considered

Enhancement of Osteoblastic-Like Cell Activity by Glow Discharge Plasma Surface Modified Hydroxyapatite/β-Tricalcium Phosphate Bone Substitute

Directory of Open Access Journals (Sweden)

Eisner Salamanca

2017-11-01

Full Text Available Glow discharge plasma (GDP treatments of biomaterials, such as hydroxyapatite/β-tricalcium phosphate (HA/β-TCP composites, produce surfaces with fewer contaminants and may facilitate cell attachment and enhance bone regeneration. Thus, in this study we used argon glow discharge plasma (Ar-GDP treatments to modify HA/β-TCP particle surfaces and investigated the physical and chemical properties of the resulting particles (HA/β-TCP + Ar-GDP. The HA/β-TCP particles were treated with GDP for 15 min in argon gas at room temperature under the following conditions: power: 80 W; frequency: 13.56 MHz; pressure: 100 mTorr. Scanning electron microscope (SEM observations showed similar rough surfaces of HA/β-TCP + Ar-GDP HA/β-TCP particles, and energy dispersive spectrometry analyses showed that HA/β-TCP surfaces had more contaminants than HA/β-TCP + Ar-GDP surfaces. Ca/P mole ratios in HA/β-TCP and HA/β-TCP + Ar-GDP were 1.34 and 1.58, respectively. Both biomaterials presented maximal intensities of X-ray diffraction patterns at 27° with 600 a.u. At 25° and 40°, HA/β-TCP + Ar-GDP and HA/β-TCP particles had peaks of 200 a.u., which are similar to XRD intensities of human bone. In subsequent comparisons, MG-63 cell viability and differentiation into osteoblast-like cells were assessed on HA/β-TCP and HA/β-TCP + Ar-GDP surfaces, and Ar-GDP treatments led to improved cell growth and alkaline phosphatase activities. The present data indicate that GDP surface treatment modified HA/β-TCP surfaces by eliminating contaminants, and the resulting graft material enhanced bone regeneration.

Carbohydrate ingestion improves performance of a new reliable test of soccer performance.

Science.gov (United States)

Currell, Kevin; Conway, Steve; Jeukendrup, Asker E

2009-02-01

The aim of the study was to investigate the reliability of a new test of soccer performance and evaluate the effect of carbohydrate (CHO) on soccer performance. Eleven university footballers were recruited and underwent 3 trials in a randomized order. Two of the trials involved ingesting a placebo beverage, and the other, a 7.5% maltodextrin solution. The protocol comprised a series of ten 6-min exercise blocks on an outdoor Astroturf pitch, separated by the performance of 2 of the 4 soccer-specific tests, making the protocol 90 min in duration. The intensity of the exercise was designed to be similar to the typical activity pattern during soccer match play. Participants performed skill tests of dribbling, agility, heading, and shooting throughout the protocol. The coefficients of variation for dribbling, agility, heading, and shooting were 2.2%, 1.2%, 7.0%, and 2.8%, respectively. The mean combined placebo scores were 42.4 +/- 2.7 s, 43.1 +/- 3.7 s, 210 +/- 34 cm, and 212 +/- 17 points for agility, dribbling, heading, and kicking, respectively. CHO ingestion led to a combined agility time of 41.5 +/- 0.8 s, for dribbling 41.7 +/- 3.5 s, 213 +/- 11 cm for heading, and 220 +/- 5 points for kicking accuracy. There was a significant improvement in performance for dribbling, agility, and shooting (p soccer performance, and ingesting CHO leads to an improvement in soccer performance.

Purchasing to improve health systems performance

National Research Council Canada - National Science Library

Robinson, Ray; Jakubowski, Elke; Figueras, Josep

2005-01-01

... as they formulate purchasing strategies so that they can increase effectiveness and improve performance in their own national context An assessment of the intersecting roles of citizens, the government and the providers * * * Written by leading health policy analysts, this book is essential reading for health policy makers, planners and managers as well as resear...

Doped tricalcium phosphate bone tissue engineering scaffolds using sucrose as template and microwave sintering: enhancement of mechanical and biological properties.

Science.gov (United States)

Ke, Dongxu; Bose, Susmita

2017-09-01

β-tricalcium phosphate (β-TCP) is a widely used biocompatible ceramic in orthopedic and dental applications. However, its osteoinductivity and mechanical properties still require improvements. In this study, porous β-TCP and MgO/ZnO-TCP scaffolds were prepared by the thermal decomposition of sucrose. Crack-free cylindrical scaffolds could only be prepared with the addition of MgO and ZnO due to their stabilization effects. Porous MgO/ZnO-TCP scaffolds with a density of 61.39±0.66%, an estimated pore size of 200μm and a compressive strength of 24.96±3.07MPa were prepared by using 25wt% sucrose after conventional sintering at 1250°C. Microwave sintering further increased the compressive strength to 37.94±6.70MPa, but it decreased the open interconnected porosity to 8.74±1.38%. In addition, the incorporation of polycaprolactone (PCL) increased 22.36±3.22% of toughness while maintaining its compressive strength at 25.45±2.21MPa. Human osteoblast cell line was seeded on scaffolds to evaluate the effects of MgO/ZnO and PCL on the biological property of β-TCP in vitro. Both MgO/ZnO and PCL improved osteoinductivity of β-TCP. PCL also decreased osteoblastic apoptosis due to its particular surface chemistry. This novel porous MgO/ZnO-TCP scaffold with PCL shows improved mechanical and biological properties, which has great potential in bone tissue engineering applications. Copyright © 2017. Published by Elsevier B.V.

Performance indicators: A tool for continuous quality improvement

Directory of Open Access Journals (Sweden)

Nidhi M Bhatnagar

2016-01-01

Full Text Available Background: Performance monitoring is an important tool which can be used for setting priorities for process improvement. At our centre, we have been monitoring every step in the processes, right from inventory of consumables (both critical and routine to number of donors reactive for TTI. We conducted a study to measure the impact of monitoring Performance Indicators and how it could be used as a tool for Continuous Quality Improvement (CQI. Materials and Methods: The present study was a retrospective study where the performance indicator (PI data of blood bank was analyzed for over four years. For certain parameters, benchmarks or thresholds were set that represented warning limits or action limits. The yearly data were collated from monthly data. "Shifts" or "Trends", if any, were identified and Corrective and Preventive Action (CAPA taken accordingly. At the end, outcomes of the analysis were charted. Results: After the yearly data evaluation, outcomes obtained were used to plan, correct and amend processes and systems in the blood center. It was observed that the workload of the center showed an upward trend. This helped us to plan for the purchase of consumables and management of manpower. The monitoring of usage and discard of blood helped in the efficient management of blood stocks. The need for any new equipment could also be judged by the trends in workload. Conclusion: Performance indicators are indispensible tools which various stakeholders in the Blood Transfusion centres should implement to improve on quality performance.

Performance indicators: A tool for continuous quality improvement.

Science.gov (United States)

Bhatnagar, Nidhi M; Soni, Shital; Gajjar, Maitrey; Shah, Mamta; Shah, Sangita; Patel, Vaidehi

2016-01-01

Performance monitoring is an important tool which can be used for setting priorities for process improvement. At our centre, we have been monitoring every step in the processes, right from inventory of consumables (both critical and routine) to number of donors reactive for TTI. We conducted a study to measure the impact of monitoring Performance Indicators and how it could be used as a tool for Continuous Quality Improvement (CQI). The present study was a retrospective study where the performance indicator (PI) data of blood bank was analyzed for over four years. For certain parameters, benchmarks or thresholds were set that represented warning limits or action limits. The yearly data were collated from monthly data. Shifts or Trends, if any, were identified and Corrective and Preventive Action (CAPA) taken accordingly. At the end, outcomes of the analysis were charted. After the yearly data evaluation, outcomes obtained were used to plan, correct and amend processes and systems in the blood center. It was observed that the workload of the center showed an upward trend. This helped us to plan for the purchase of consumables and management of manpower. The monitoring of usage and discard of blood helped in the efficient management of blood stocks. The need for any new equipment could also be judged by the trends in workload. Performance indicators are indispensible tools which various stakeholders in the Blood Transfusion centres should implement to improve on quality performance.

Improving engineers' performance with computers

International Nuclear Information System (INIS)

Purvis, E.E. III

1984-01-01

The problem addressed is how to improve the performance of engineers in the design, operation, and maintenance of nuclear power plants. The application of computer science to this problem offers a challenge in maximizing the use of developments outside the nuclear industry and setting priorities to address the most fruitful areas first. Areas of potential benefits include data base management through design, analysis, procurement, construction, operation maintenance, cost, schedule and interface control and planning, and quality engineering on specifications, inspection, and training

Improving the Performance of the Extreme-scale Simulator

Energy Technology Data Exchange (ETDEWEB)

Engelmann, Christian [ORNL; Naughton III, Thomas J [ORNL

2014-01-01

Investigating the performance of parallel applications at scale on future high-performance computing (HPC) architectures and the performance impact of different architecture choices is an important component of HPC hardware/software co-design. The Extreme-scale Simulator (xSim) is a simulation-based toolkit for investigating the performance of parallel applications at scale. xSim scales to millions of simulated Message Passing Interface (MPI) processes. The overhead introduced by a simulation tool is an important performance and productivity aspect. This paper documents two improvements to xSim: (1) a new deadlock resolution protocol to reduce the parallel discrete event simulation management overhead and (2) a new simulated MPI message matching algorithm to reduce the oversubscription management overhead. The results clearly show a significant performance improvement, such as by reducing the simulation overhead for running the NAS Parallel Benchmark suite inside the simulator from 1,020\\% to 238% for the conjugate gradient (CG) benchmark and from 102% to 0% for the embarrassingly parallel (EP) and benchmark, as well as, from 37,511% to 13,808% for CG and from 3,332% to 204% for EP with accurate process failure simulation.

Polyvalent fuel treatment facility (TCP): shearing and dissolution of used fuel at La Hague facility

Energy Technology Data Exchange (ETDEWEB)

Brueziere, J.; Tribout-Maurizi, A.; Durand, L.; Bertrand, N. [Recycling Business Unit, AREVA, 1 place de la coupole, 92084 Paris La defense Cedex (France)

2013-07-01

Although many used nuclear fuel types have already been recycled, recycling plants are generally optimized for Light Water Reactor (LWR) UO{sub x} fuel. Benefits of used fuel recycling are consequently restricted to those fuels, with only limited capacity for the others like LWR MOX, Fast Reactor (FR) MOX or Research and Test Reactor (RTR) fuel. In order to recycle diverse fuel types, an innovative and polyvalent shearing and dissolving cell is planned to be put in operation in about 10 years at AREVA's La Hague recycling plant. This installation, called TCP (French acronym for polyvalent fuel treatment) will benefit from AREVA's industrial feedback, while taking part in the next steps towards a fast reactor fuel cycle development using innovative treatment solutions. Feasibility studies and R/Development trials on dissolution and shearing are currently ongoing. This new installation will allow AREVA to propose new services to its customers, in particular in term of MOX fuel, Research Test Reactors fuel and Fast Reactor fuel treatment. (authors)

Polymer-Ceramic Composite Scaffolds: The Effect of Hydroxyapatite and β-tri-Calcium Phosphate.

Science.gov (United States)

Huang, Boyang; Caetano, Guilherme; Vyas, Cian; Blaker, Jonny James; Diver, Carl; Bártolo, Paulo

2018-01-14

The design of bioactive scaffolds with improved mechanical and biological properties is an important topic of research. This paper investigates the use of polymer-ceramic composite scaffolds for bone tissue engineering. Different ceramic materials (hydroxyapatite (HA) and β-tri-calcium phosphate (TCP)) were mixed with poly-ε-caprolactone (PCL). Scaffolds with different material compositions were produced using an extrusion-based additive manufacturing system. The produced scaffolds were physically and chemically assessed, considering mechanical, wettability, scanning electron microscopy and thermal gravimetric tests. Cell viability, attachment and proliferation tests were performed using human adipose derived stem cells (hADSCs). Results show that scaffolds containing HA present better biological properties and TCP scaffolds present improved mechanical properties. It was also possible to observe that the addition of ceramic particles had no effect on the wettability of the scaffolds.

Entropic stabilisation of topologically close-packed phases in binary transition-metal alloys

Energy Technology Data Exchange (ETDEWEB)

Hammerschmidt, Thomas; Fries, Suzana G.; Steinbach, Ingo; Drautz, Ralf [ICAMS, Ruhr-Universitaet Bochum, Bochum (Germany); Seiser, Bernhard; Pettifor, David G. [Department of Materials, University of Oxford, Oxford (United Kingdom)

2010-07-01

The formation of topologically close-packed (tcp) phases in Ni-based superalloys leads to the degradation of the mechanical properties of the alloys. The precipitation of the tcp phases is attributed to refractory elements that are added in low concentration to improve creep resistance. It is well known that the structural stability of the tcp phases A15, {sigma} and {chi} is driven by the average d-band filling. For a direct comparison to experimental phase diagrams, we carried out extensive density-functional theory (DFT) calculations of the tcp phases A15, C14, C15, C36, {mu}, {sigma}, and {chi} in tcp-forming binary transition-metal (TM) systems. We observe several systems such as W-Re with positive values of the heat of formation for all tcp phases although some of the phases are observed experimentally. By combining our DFT total energies with the CALPHAD methodology, we can demonstrate that configurational entropy can stabilise the tcp phases in these systems.

Experience of safety and performance improvement for fuel handling equipment

International Nuclear Information System (INIS)

Gyoon Chang, Sang; Hee Lee, Dae

2014-01-01

The purpose of this study is to provide experience of safety and performance improvement of fuel handling equipment for nuclear power plants in Korea. The fuel handling equipment, which is used as an important part of critical processes during the refueling outage, has been improved to enhance safety and to optimize fuel handling procedures. Results of data measured during the fuel reloading are incorporated into design changes. The safety and performance improvement for fuel handling equipment could be achieved by simply modifying the components and improving the interlock system. The experience provided in this study can be useful lessons for further improvement of the fuel handling equipment. (authors)

Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model

International Nuclear Information System (INIS)

Kim, Jinku; McBride, Sean; Alvarez-Urena, Pedro; Song, Young-Hye; Hollinger, Jeffrey O; Tellis, Brandi; Dean, David D; Sylvia, Victor L; Elgendy, Hoda; Ong, Joo

2012-01-01

Bone tissue engineering scaffolds composed of poly(d,l-lactide:glycolide) (DL-PLGA) and β-tricalcium phosphate (β-TCP) nanocomposites were prepared and characterized. Scaffolds with two specific architectures were produced via fused deposition modeling (FDM), a type of extrusion freeform fabrication. Microfilaments deposited at angles of 0° and 90° were designated as the ‘simple’ scaffold architecture, while those deposited at angles alternating between 0°, 90°, 45° and −45° were designated as the ‘complex’ scaffold architecture. In addition, the simple and complex scaffolds were coated with hydroxyapatite (HA). The surface morphology of the scaffolds was assessed before and after HA coating and uniform distribution of HA coating on the surface was observed by scanning electron microscopy. The scaffolds were implanted into rabbit femoral unicortical bone defects according to four treatment groups based on pore structure and HA coating. After 6 and 12 weeks, scaffolds and host bone were recovered and processed for histology. Data suggest that all configurations of the scaffolds integrated with the host bone and were biocompatible and thus may offer an exciting new scaffold platform for delivery of biologicals for bone regeneration. (paper)

Does Multiple Intelligence Improve Performance? Evidence from a ...

African Journals Online (AJOL)

This study reports the findings of a study that investigated the relationship between multiple intelligence (MI) and academic performance in higher education. It addresses one question: does MI improve academic performance? Taking the case of the finalist cohort of the university's Faculty of Education of the academic year ...

PERFORMANCE IMPROVEMENT STRATEGIES USED BY MANAGERS IN THE PRIVATE SECTOR

Directory of Open Access Journals (Sweden)

Raþiu Patricia

2013-07-01

Full Text Available Abstract: There are many situations in professional life when for various reasons we are employed in jobs that do not meet our emotional expectations our professional capabilities, our passions and therefore performance on that job will not be high. Analysis of the causes of under-utilization of human potential and adoption of appropriate strategies according to employee needs help reduce staff turnover costs. The main objective of the present paper consists in identifying managerial strategies which contribute to the improvement of the employees’ performances by stimulating their motivation, and the extent to which they are used in the managerial practice. Based on literature review we realized an integrated model and developed a classification, that present our own vision regarding performance improvement strategies. Our classification divides strategies for improving employees’ performances into four main groups: by employees’ development, by rewarding employees, by modifying the job description, by employee involvement in the organization. Starting from this model, through two types of questionnaires we have made an empirical research among managers as well as among office personnel, in order to capture both perspectives regarding the pursued objectives. For the present paper we will present only research results obtained for performance improvement strategies by employees’ development because support a higher degree of generality and do not depend on the organization characteristics. A quantitative data analize from the two samples show that there are differences between managers and employees perception when it comes to strategies used in their organizations and also manager did not know which determines employees to strive in order to improve their performance and obtain better results. The strategies to improve the employee’s performances, proposed within this article have the role to show the fact that managers cannot

Treatment of osteomyelitis defects by a vancomycin-loaded gelatin/β-tricalcium phosphate composite scaffold

Science.gov (United States)

Zhou, J.; Zhou, X. G.; Wang, J. W.; Zhou, H.; Dong, J.

2018-01-01

Objective In the present study, we aimed to assess whether gelatin/β-tricalcium phosphate (β-TCP) composite porous scaffolds could be used as a local controlled release system for vancomycin. We also investigated the efficiency of the scaffolds in eliminating infections and repairing osteomyelitis defects in rabbits. Methods The gelatin scaffolds containing differing amounts of of β-TCP (0%, 10%, 30% and 50%) were prepared for controlled release of vancomycin and were labelled G-TCP0, G-TCP1, G-TCP3 and G-TCP5, respectively. The Kirby-Bauer method was used to examine the release profile. Chronic osteomyelitis models of rabbits were established. After thorough debridement, the osteomyelitis defects were implanted with the scaffolds. Radiographs and histological examinations were carried out to investigate the efficiency of eliminating infections and repairing bone defects. Results The prepared gelatin/β-TCP scaffolds exhibited a homogeneously interconnected 3D porous structure. The G-TCP0 scaffold exhibited the longest duration of vancomycin release with a release duration of eight weeks. With the increase of β-TCP contents, the release duration of the β-TCP-containing composite scaffolds was decreased. The complete release of vancomycin from the G-TCP5 scaffold was achieved within three weeks. In the treatment of osteomyelitis defects in rabbits, the G-TCP3 scaffold showed the most efficacious performance in eliminating infections and repairing bone defects. Conclusions The composite scaffolds could achieve local therapeutic drug levels over an extended duration. The G-TCP3 scaffold possessed the optimal porosity, interconnection and controlled release performance. Therefore, this scaffold could potentially be used in the treatment of chronic osteomyelitis defects. Cite this article: J. Zhou, X. G. Zhou, J. W. Wang, H. Zhou, J. Dong. Treatment of osteomyelitis defects by a vancomycin-loaded gelatin/β-tricalcium phosphate composite scaffold. Bone Joint Res

Plotting performance improvement progress through the development of a trauma dashboard.

Science.gov (United States)

Hochstuhl, Diane C; Elwell, Sean

2014-01-01

Performance improvement processes are the core of a pediatric trauma program. The ability to identify, resolve, and trend specific indicators related to patient care and to show effective loop closure can be especially challenging. Using the hospital's overall quality process as a template, the trauma program built its own electronic dashboard. Our maturing trauma PI program now guides the overall trauma care. All departments own at least one performance indicator and must provide action plans for improvement. Utilization of an electronic dashboard for trauma performance improvement has provided a highly visible scorecard, which highlights successes and tracks areas needing improvement.

Improvement programme of safety performance indicators (SPIs) in Korea

International Nuclear Information System (INIS)

Lee, S.Y.

2001-01-01

KINS has developed and used Safety Performance Indicators (SPIs), which are count based and composed of 10 indicators in 8 areas, to monitor the trend of performance of NPPs in Korea since 1997. However, the limited usage of SPIs and the increasing worldwide interest on SPIs became the motivation of the SPI improvement programme in Korea. Korea is planning to establish plant performance evaluation programme through analysis of SPI and result of inspection. The SPI improvement programme is a part of the plant performance evaluation programme and includes study on performance evaluation areas, indicator categories, selection and development of indicators, redefinition of indicators and introduction of graphical display system. The selected performance evaluation areas are general performance, reactor safety and radiation safety. Each area will have categories as sub-areas and a total of six categories are selected. One or two indicators for each category are determined or will be developed to make a set of Safety Performance Indicators. Also, a graphic display system will be introduced to extend the usage of SPIs. (author)

Performance Improvement of a Centrifugal Compressor by Passive Means

Directory of Open Access Journals (Sweden)

N. Sitaram

2012-01-01

Full Text Available The present experimental investigation deals with performance improvement of a low-speed centrifugal compressor by inexpensive passive means such as turbulence generator placed at different positions and partial shroud near the rotor blade tip. The experiments are carried out at three values of tip clearance, namely 2.2%, 5.1%, and 7.9% of rotor blade height at the exit. Performance tests are carried out for a total of 13 configurations. From these measurements, partial shroud is found to give the best performance. The improvement in the compressor performance may be due to the reduction of tip leakage flows by the small extension of partial shroud (2 mm on the pressure surface side. Although there is nominal change in performance due to turbulence generator (TG, TG has beneficial effect of increased operating range.

Device Engineering Towards Improved Tin Sulfide Solar Cell Performance and Performance Reproducibility

Energy Technology Data Exchange (ETDEWEB)

Steinmann, Vera; Chakraborty, Rupak; Rekemeyer, Paul; Siol, Sebastian; Martinot, Loic; Polizzotti, Alex; Yang, Chuanxi; Hartman, Katy; Gradecak, Silvija; Zakutayev, Andriy; Gordon, Roy G.; Buonassisi, Tonio

2016-11-21

As novel absorber materials are developed and screened for their photovoltaic (PV) properties, the challenge remains to rapidly test promising candidates in high-performing PV devices. There is a need to engineer new compatible device architectures, including the development of novel transparent conductive oxides and buffer layers. Here, we consider the two approaches of a substrate-style and a superstrate-style device architecture for novel thin-film solar cells. We use tin sulfide as a test absorber material. Upon device engineering, we demonstrate new approaches to improve device performance and performance reproducibility.

Using calcium silicate to regulate the physicochemical and biological properties when using β-tricalcium phosphate as bone cement

Energy Technology Data Exchange (ETDEWEB)

Kao, Chia-Tze; Huang, Tsui-Hsien [School of Dentistry, Chung Shan Medical University, Taichung, Taiwan (China); Department of Dentistry, Chung Shan Medical University Hospital, Taichung, Taiwan (China); Chen, Yi-Jyun [School of Dentistry, Chung Shan Medical University, Taichung, Taiwan (China); Department of Dentistry, Chung Shan Medical University Hospital, Taichung, Taiwan (China); Dental Department, Taichung Hospital, Ministry of Health and Welfare, Taichung City, Taiwan (China); Hung, Chi-Jr [School of Dentistry, Chung Shan Medical University, Taichung, Taiwan (China); Department of Dentistry, Chung Shan Medical University Hospital, Taichung, Taiwan (China); Lin, Chi-Chang, E-mail: chichang31@gmail.com [Department of Chemical and Materials Engineering, Tunghai University, Taichung, Taiwan (China); Shie, Ming-You, E-mail: eviltacasi@gmail.com [Department of Chemical and Materials Engineering, Tunghai University, Taichung, Taiwan (China)

2014-10-01

β-Tricalcium phosphate (β-TCP) is an osteoconductive material. For this research we have combined it with a low degradation calcium silicate (CS) to enhance its bioactive and osteostimulative properties. To check its effectiveness, a series of β-TCP/CS composites with different ratios were prepared to make new bioactive and biodegradable biocomposites for bone repair. Regarding the formation of bone-like apatite, the diametral tensile strength as well as the ion release and weight loss of composites were compared both before and after immersions in simulated body fluid (SBF). In addition, we also examined the behavior of human dental pulp cells (hDPCs) cultured on β-TCP/CS composites. The results show that the apatite deposition ability of the β-TCP/CS composites improves as the CS content is increased. For composites with more than a 60% CS content, the samples become completely covered by a dense bone-like apatite layer. At the end of the immersion period, weight losses of 24%, 32%, 34%, 38%, 41%, and 45% were observed for the composites containing 0%, 20%, 40%, 80%, 80% and 100% β-TCP cements, respectively. In addition, the antibacterial activity of CS/β-TCP composite improves as the CS-content is increased. In vitro cell experiments show that the CS-rich composites promote human dental pulp cell (hDPC) proliferation and differentiation. However, when the CS quantity in the composite is less than 60%, the quantity of cells and osteogenesis protein of hDPCs is stimulated by Si released from the β-TCP/CS composites. The degradation of β-TCP and the osteogenesis of CS give strong reason to believe that these calcium-based composite cements will prove to be effective bone repair materials. - Highlights: • CS improved the physicochemical properties and osteogenic activity of β-TCP. • Higher CS in the composite, the shorter setting time and the higher DTS was found. • With a CS more than 40%, the osteogenesis and angiogenesis proteins were promoted by

Improving the Performance of Justice Institutions

OpenAIRE

Decker, Klaus; Mohlen, Christian; Varela, David F.

2011-01-01

This paper presents a selection of experiences from Organization for Economic Cooperation and Development (OECD) countries in managing justice institutions which are the most relevant for performance improvement of their counterparts in Latin America. The scope of the paper is mostly limited to the courts, but comprises all types of courts: specialized courts as well as courts of general j...

Improved Low Temperature Performance of Supercapacitors

Science.gov (United States)

Brandon, Erik J.; West, William C.; Smart, Marshall C.; Gnanaraj, Joe

2013-01-01

Low temperature double-layer capacitor operation enabled by: - Base acetonitrile / TEATFB salt formulation - Addition of low melting point formates, esters and cyclic ethers center dot Key electrolyte design factors: - Volume of co-solvent - Concentration of salt center dot Capacity increased through higher capacity electrodes: - Zeolite templated carbons - Asymmetric cell designs center dot Continuing efforts - Improve asymmetric cell performance at low temperature - Cycle life testing Motivation center dot Benchmark performance of commercial cells center dot Approaches for designing low temperature systems - Symmetric cells (activated carbon electrodes) - Symmetric cells (zeolite templated carbon electrodes) - Asymmetric cells (lithium titanate/activated carbon electrodes) center dot Experimental results center dot Summary

Improved rate control for electron-beam evaporation and evaluation of optical performance improvements.

Science.gov (United States)

Gevelber, Michael; Xu, Bing; Smith, Douglas

2006-03-01

A new deposition-rate-control and electron-beam-gun (e-gun) strategy was developed that significantly reduces the growth-rate variations for e-beam-deposited SiO2 coatings. The resulting improvements in optical performance are evaluated for multilayer bandpass filters. The adverse effect of uneven silica-source depletion on coating spectral performances during long deposition runs is discussed.

Access Agent Improving The Performance Of Access Control Lists

Directory of Open Access Journals (Sweden)

Thelis R. S.

2015-08-01

Full Text Available The main focus of the proposed research is maintaining the security of a network. Extranet is a popular network among most of the organizations where network access is provided to a selected group of outliers. Limiting access to an extranet can be carried out using Access Control Lists ACLs method. However handling the workload of ACLs is an onerous task for the router. The purpose of the proposed research is to improve the performance and to solidify the security of the ACLs used in a small organization. Using a high performance computer as a dedicated device to share and handle the router workload is suggested in order to increase the performance of the router when handling ACLs. Methods of detecting and directing sensitive data is also discussed in this paper. A framework is provided to help increase the efficiency of the ACLs in an organization network using the above mentioned procedures thus helping the organizations ACLs performance to be improved to be more secure and the system to perform faster. Inbuilt methods of Windows platform or Software for open source platforms can be used to make a computer function as a router. Extended ACL features allow the determining of the type of packets flowing through the router. Combining these mechanisms allows the ACLs to be improved and perform in a more efficient manner.

Effectively Managing Nuclear Risk Through Human Performance Improvement

International Nuclear Information System (INIS)

Coe, Richard; Lake, Patricia

2003-01-01

The U.S. commercial nuclear industry has just completed an outstanding decade of plant performance. Safety levels and electric production are at unprecedented high levels and continue to exceed even high industry goals. Nuclear energy continues to keep the highest priority on performance improvement programs and highly trained and qualified people that maintain its record setting safety and reliability of operations. While the industry has maintained a high level of performance, the advent of deregulation and the consolidation of nuclear power plant ownership, as well as the current climate for concern about both rising energy costs and the availability of power, have raised the standard for nuclear energy's level of competitiveness in today's market place. The resulting challenge is how to more effectively manage risk and to improve performance even further in a generally high-performing industry. One of the most effective ways to develop this culture is to apply the principles of Hum an Performance Technology, or HPT. HPT is a relatively new field. Its principles are derived from the research and practice of behavioral and cognitive psychologists, instructional technologists, training designers, organizational developers, and various human resource specialists. Using the principles of HPT can help the nuclear industry successfully meet ever-changing environmental and business demands

Performance improvement CME for quality: challenges inherent to the process.

Science.gov (United States)

Vakani, Farhan Saeed; O'Beirne, Ronan

2015-01-01

The purpose of this paper is to discuss the perspective debates upon the real-time challenges for a three-staged Performance Improvement Continuing Medical Education (PI-CME) model, an innovative and potential approach for future CME, to inform providers to think, prepare and to act proactively. In this discussion, the challenges associated for adopting the American Medical Association's three-staged PI-CME model are reported. Not many institutions in USA are using a three-staged performance improvement model and then customizing it to their own healthcare context for the specific targeted audience. They integrate traditional CME methods with performance and quality initiatives, and linking with CME credits. Overall the US health system is interested in a structured PI-CME model with the potential to improve physicians practicing behaviors. Knowing the dearth of evidence for applying this structured performance improvement methodology into the design of CME activities, and the lack of clarity on challenges inherent to the process that learners and providers encounter. This paper establishes all-important first step to render the set of challenges for a three-staged PI-CME model.

Performance in physiology evaluation: possible improvement by active learning strategies.

Science.gov (United States)

Montrezor, Luís H

2016-12-01

The evaluation process is complex and extremely important in the teaching/learning process. Evaluations are constantly employed in the classroom to assist students in the learning process and to help teachers improve the teaching process. The use of active methodologies encourages students to participate in the learning process, encourages interaction with their peers, and stimulates thinking about physiological mechanisms. This study examined the performance of medical students on physiology over four semesters with and without active engagement methodologies. Four activities were used: a puzzle, a board game, a debate, and a video. The results show that engaging in activities with active methodologies before a physiology cognitive monitoring test significantly improved student performance compared with not performing the activities. We integrate the use of these methodologies with classic lectures, and this integration appears to improve the teaching/learning process in the discipline of physiology and improves the integration of physiology with cardiology and neurology. In addition, students enjoy the activities and perform better on their evaluations when they use them. Copyright © 2016 The American Physiological Society.

Real time data acquisition for a time projection chamber using a high speed DEC-RT11 to UNIX UDP-TCP/IP interface

International Nuclear Information System (INIS)

Thomas, J.; Douglas, M.; Watanabe, R.; Henrikson, H.E.; Iqbal, M.Z.; Mitchell, L.W.; O'Callaghan, B.M.G.; Wong, H.T.K.; Melvin, J.D.

1987-01-01

The authors built a high pressure xenon Time Projection Chamber to study double beta decay, a process of fundamental interest which, if observed, would indicate that the neutrino is a massive Majorana particle. Raw data rates from the TPC exceed 200 Kbytes per second. The TPC is operated through a CAMAC interface with a DEC LSI-11/73 computer networked to a Tektronix 6130 workstation. Data is transmitted at about 15 Kbytes per second although the network is capable of transmitting data at 80 Kbytes per second. The only system level programming required was to write a UDP-TCP/IP driver for the DEC-DEQNA Ethenet board on the 11/73

Conceptual Designs for the Performance Improvement of APR1400 SIT and Preliminary Performance Evaluation

International Nuclear Information System (INIS)

Chu, In-Cheol; Kwon, Tae-Soon; Song, Chul-Hwa

2008-01-01

Some evolutionary type PWRs such as APR1400 and APWR adopt advanced safety injection tank (SIT). The SIT of APR1400 has a fluidic device (FD) which passively controls ECC water injection flow rate into reactor coolant system during refill and reflood phases of LB-LOCA (i.e., a high injection flow rate during the refill phase and a low injection flow rate during the reflood phase). The benefit of the FD is the elimination of the function of low pressure safety injection pump from the safety injection system. The flow controlling performance of the APR1400 FD was evaluated using a prototypical full-scale test facility, called VAPER (Valve Performance Evaluation Rig). Even though the performance of the APR1400 FD satisfied major design and licensing requirements, further improvement of the performance is expected such as the extension of total injection period, the delay of nitrogen gas discharge. Several conceptual designs have been being drawn out in order to improve the performance of the APR1400 SIT. The performance of some designs was evaluated using a small scale SIT test rig. The present paper introduces some of the conceptual designs and shows the performance evaluation experimental results

Teacher’s comprehensive training strategy for improving didactics performance

Directory of Open Access Journals (Sweden)

Pozas, W. J

2014-07-01

Full Text Available The paper describes a Teacher’s comprehensive training strategy for improving didactics performance, together with its theoretical foundations. The strategy is structured into several dimensions related to teachers’ development (lesson planning, continuing education and research. It is organized into two phases and seven stages intended to improve leadership in the teaching-learning process. The finding are the expression of a comprehensive approach to school organization at Services Polytechnic School “Horacio Cobiellas Domínguez” resulting in teachers’ academic and scientific development and a significant growth of the staff scientific potentials manifested in scientific forum enrolment. The resulting impact should lead to a general use of the proposed strategy in the Polytechnic school web. Key words: professional performance, pedagogic professional performance, didactic professional performance, teachers’ developmental strategy

Design, Implementation and Evaluation of Congestion Control Mechanism for Video Streaming

OpenAIRE

Hiroshi Noborio; Hiroyuki Hisamatsu; Hiroki Oda

2011-01-01

In recent years, video streaming services over TCP, such as YouTube, have become more and more popular. TCP NewReno, the current TCP standard, performs greedy congestion control, which increases the congestion window size until packet loss occurs. Therefore, because TCP transmits data at a much higher rate than the video playback rate, the probability of packet loss in the network increases, which in turn takes bandwidth from other network traffic. In this paper, we propose a new transport-la...

Improved operational performance through the use of business planning tools

International Nuclear Information System (INIS)

Hoelscher, H.L.

1996-01-01

Improved operational performance at Point Beach Nuclear Plant is based on a focused business plan. Quantitative goals that compare past performance with the performance of potential competitors are the basis of the business plan. This establishes goals for the nuclear power business unit which support corporate goals. Strategies and objectives are then developed to meet the established goals. To continue support for these strategies and objectives, individual performance plans are developed for all management personnel. These performance management plans identify individual contributor actions to support the goals, and also provide periodic feedback for changes to better prioritize individual actions. Performance criteria are also established to measure progress toward achieving the goals. The author also has a program to provide incentives for improved performance based upon success of the organization in achieving established goals

The effectiveness of lean manufacturing audits in measuring operational performance improvements

Directory of Open Access Journals (Sweden)

Taggart, P.

2013-08-01

Full Text Available The hypothesis that lean manufacturing audits are an effective way to measure improvements in operational performance was tested using 64 manufacturing sites owned by a FTSE 100 company. Commonly-used lean characteristics were evaluated: policy deployment, standardised work, visual management and housekeeping, quick changeover techniques, total productive maintenance, continuous improvement (kaizen, error proofing, cultural awareness, material control, and levelling (heijunka. Operational performance was assessed employing commonly-used operational performance measures: on-time-delivery, inventory turns, and direct labour utilisation. The findings are that lean manufacturing audits are effective in measuring improvements in operational performance provided that the audit scope and the lean characteristics are aligned up front.

Healthcare Analytics: Creating a Prioritized Improvement System with Performance Benchmarking.

Science.gov (United States)

Kolker, Eugene; Kolker, Evelyne

2014-03-01

The importance of healthcare improvement is difficult to overstate. This article describes our collaborative work with experts at Seattle Children's to create a prioritized improvement system using performance benchmarking. We applied analytics and modeling approaches to compare and assess performance metrics derived from U.S. News and World Report benchmarking data. We then compared a wide range of departmental performance metrics, including patient outcomes, structural and process metrics, survival rates, clinical practices, and subspecialist quality. By applying empirically simulated transformations and imputation methods, we built a predictive model that achieves departments' average rank correlation of 0.98 and average score correlation of 0.99. The results are then translated into prioritized departmental and enterprise-wide improvements, following a data to knowledge to outcomes paradigm. These approaches, which translate data into sustainable outcomes, are essential to solving a wide array of healthcare issues, improving patient care, and reducing costs.

The Social Responsibility Performance Outcomes Model: Building Socially Responsible Companies through Performance Improvement Outcomes.

Science.gov (United States)

Hatcher, Tim

2000-01-01

Considers the role of performance improvement professionals and human resources development professionals in helping organizations realize the ethical and financial power of corporate social responsibility. Explains the social responsibility performance outcomes model, which incorporates the concepts of societal needs and outcomes. (LRW)

Towards improving construction labor productivity and projects’ performance

Directory of Open Access Journals (Sweden)

Mostafa E. Shehata

2011-12-01

Full Text Available Proper management of resources in construction projects can yield substantial savings in time and cost. As construction is a labor-intensive industry, this paper focuses on labor productivity in the construction industry. This study considers the current state-of-the-art issues relevant to this subject. It covers the construction labor productivity definitions, aspects, measurements, factors affecting it, different techniques used for measuring it and modeling techniques. The main outcome from the literature is that there is no standard definition of productivity. This study provides a guide for necessary steps required to improve construction labor productivity and consequently, the project performance. It can help improve the overall performance of construction projects through the implementation of the concept of benchmarks. Also, it gives an up to date concept of loss of productivity measurement for construction productivity claims. Two major case studies, from the literature, are presented to show construction labor productivity rates, factors affecting construction labor productivity and how to improve it.

Improvement of sludge removal performance for steam generators

International Nuclear Information System (INIS)

Nishida, K.; Sakai, K.; Ito, H.; Tanahashi, A.; Nakao, F.

2002-01-01

Scale, mainly consisting of magnetite, flows on the secondary side of steam generators (SGs), causing the formation of concentrations of impurities on the tubesheet (TS), increasing the fouling of tube heat transfer, and blocking the broached egg crates (BEC) on the tube support plates (TSP). Accumulation of sludge on the tubesheet forms environment in which impurities are highly concentrated on the tubes. And we have experienced tube degradation, in the past, from the concentration of impurities. In Japan, the first tubesheet sludge lancing, via water jets, was done at the Mihama-2 plant in 1975. And that is why this pile sludge becomes hard depending on time, removal made an effort toward removal with CECIL* (in bundle cleaning system) us very difficulty. However, sludge remained in localized areas and it had possibility of concentration. So that we improve the CECIL for the purpose of removing it, and we improved removal performance of the device. In addition to the improvement of CECIL, we install a sludge collector in order to decrease accumulation of sludge on the tubesheet. This paper introduces these improvements in sludge removal performance. (authors)

Biochar Improves Performance of Plants for Mine Soil Revegetation

Science.gov (United States)

Biochar (the solid by-product of pyrolysis of biomass), has the potential to improve plant performance for revegetation of mine soils by improving soil chemistry, fertility, moisture holding capacity and by binding heavy metals. We investigated the effect of gasified conifer sof...

Improving total-building seismic performance using linear fluid viscous dampers

OpenAIRE

Del Gobbo, GM; Blakeborough, A; Williams, MS

2018-01-01

Previous research has revealed that Eurocode-compliant structures can experience structural and nonstructural damage during earthquakes. Retrofitting buildings with fluid viscous dampers (FVDs) can improve interstorey drifts and floor accelerations, two structural parameters that characterize seismic demand. Previous research focusing on FVD applications for improving seismic performance has focused on structural performance. Structural parameters such as interstorey drifts and floor accelera...

Working Memory Training Improves Dual-Task Performance on Motor Tasks.

Science.gov (United States)

Kimura, Takehide; Kaneko, Fuminari; Nagahata, Keita; Shibata, Eriko; Aoki, Nobuhiro

2017-01-01

The authors investigated whether working memory training improves motor-motor dual-task performance consisted of upper and lower limb tasks. The upper limb task was a simple reaction task and the lower limb task was an isometric knee extension task. 45 participants (age = 21.8 ± 1.6 years) were classified into a working memory training group (WM-TRG), dual-task training group, or control group. The training duration was 2 weeks (15 min, 4 times/week). Our results indicated that working memory capacity increased significantly only in the WM-TRG. Dual-task performance improved in the WM-TRG and dual-task training group. Our study provides the novel insight that working memory training improves dual-task performance without specific training on the target motor task.

Performance of the CMS Event Builder

Energy Technology Data Exchange (ETDEWEB)

Andre, J.M.; et al.

2017-11-22

The data acquisition system (DAQ) of the CMS experiment at the CERN Large Hadron Collider assembles events at a rate of 100 kHz, transporting event data at an aggregate throughput of to the high-level trigger farm. The DAQ architecture is based on state-of-the-art network technologies for the event building. For the data concentration, 10/40 Gbit/s Ethernet technologies are used together with a reduced TCP/IP protocol implemented in FPGA for a reliable transport between custom electronics and commercial computing hardware. A 56 Gbit/s Infiniband FDR Clos network has been chosen for the event builder. This paper presents the implementation and performance of the event-building system.

improving performance of laying hens

Directory of Open Access Journals (Sweden)

A.P Sinurat

2012-10-01

Full Text Available A trial was conducted in order to study the effect of the supplementation of Avizyme 1500® (Danisco Animal Nutrition, Marlborough, UK on the performance of laying hens for one year. A control diet based on corn – soybean meal was formulated to meet nutrient requirement of ISA Brown laying hens. Two treatments, the control diet (C and C + 1000 g Avizyme/tonne diet were tested. Each diet was fed to 80 birds (20 replicates of 4 birds from 20 to 72 weeks of age, and performances of birds (feed intake, egg production, egg size, egg mass, feed conversion ratio, and egg quality were measured. All data were subject to analyses of variance following the t-test. Results showed that the addition of Avizyme 1500 to the feed reduced feed intake by 4% (P < 0.01, mortality by 75 % or from 15% to 3.75% (P < 0.01 and improved the feed conversion ratio by 3 % (P < 0.05. The high mortality of the control treatment (15% is explained by an E.coli infection that was observed following the post-mortem examination of dead birds. The egg production (HD and HH, egg size and egg mass however were not significantly affected by the Avizyme supplementation. Egg quality (HU, yolk colour score, yolk weight and shell thickness was not significantly affected by Avizyme supplementation. It can be concluded that the supplementation of 1000 g Avizyme /tonne of diet improved feed efficiency and this was mediated via a reduction in feed intake.

Adaptive Radiotherapy for Locally Advanced Non–Small-Cell Lung Cancer Does Not Underdose the Microscopic Disease and has the Potential to Increase Tumor Control

International Nuclear Information System (INIS)

Guckenberger, Matthias; Richter, Anne; Wilbert, Juergen; Flentje, Michael; Partridge, Mike

2011-01-01

Purpose: To evaluate doses to the microscopic disease (MD) in adaptive radiotherapy (ART) for locally advanced non–small-cell lung cancer (NSCLC) and to model tumor control probability (TCP). Methods and Materials: In a retrospective planning study, three-dimensional conformal treatment plans for 13 patients with locally advanced NSCLC were adapted to shape and volume changes of the gross tumor volume (GTV) once or twice during conventionally fractionated radiotherapy with total doses of 66 Gy; doses in the ART plans were escalated using an iso-mean lung dose (MLD) approach compared to non-adapted treatment. Dose distributions to the volumes of suspect MD were simulated for a scenario with synchronous shrinkage of the MD and GTV and for a scenario of a stationary MD despite GTV shrinkage; simulations were performed using deformable image registration. TCP calculations considering doses to the GTV and MD were performed using three different models. Results: Coverage of the MD at 50 Gy was not compromised by ART. Coverage at 60 Gy in the scenario of a stationary MD was significantly reduced from 92% ± 10% to 73% ± 19% using ART; however, the coverage was restored by iso-MLD dose escalation. Dose distributions in the MD were sufficient to achieve a TCP >80% on average in all simulation experiments, with the clonogenic cell density the major factor influencing TCP. The combined TCP for the GTV and MD was 19.9% averaged over all patients and TCP models in non-adaptive treatment with 66 Gy. Iso-MLD dose escalation achieved by ART increased the overall TCP by absolute 6% (adapting plan once) and by 8.7% (adapting plan twice) on average. Absolute TCP values were significantly different between the TCP models; however, all TCP models suggested very similar TCP increase by using ART. Conclusions: Adaptation of radiotherapy to the shrinking GTV did not compromise dose coverage of volumes of suspect microscopic disease and has the potential to increase TCP by >40% compared

Human performance improvement in organizations: Potential application for the nuclear industry

International Nuclear Information System (INIS)

2005-11-01

This publication is primarily intended for managers and specialists in nuclear facility operating organizations working in the area of human performance improvement. It is intended to provide them with practical information they can use to improve human performance in their organizations. While some of the information provided in this publication is based upon the experience of nuclear facility operating organizations, most of it comes from human performance improvement initiatives in non-nuclear organizations and industries. The nuclear industry has a long tradition of sharing good management practices in order to foster continuous improvement. However, it is not always realized that many of the practices that are now well established initially came from non-nuclear industries and were subsequently adapted for application to nuclear power plant operating organizations. There is, therefore, good reason to periodically review non-nuclear industry practices for ideas that might have direct or indirect application to the nuclear industry in order to potentially gain benefits such as the following: new approaches to certain problem areas, insights into new or impending challenges, improvements in existing practices, benchmarking of opportunities, development of learning organizations and avoidance of collective blind spots. The preparation of this report was an activity of the project on Effective Training to Achieve Excellence in the Performance of NPP Personnel. The objective of this project is to enhance the capability of Member States to utilize proven practices developed and transferred by the IAEA for improving personnel performance. The expected outcome from this project is the increased use by organizations in Members States of proven engineering and management practices and methodologies developed and transferred by the IAEA to improve personnel performance