WorldWideScience

Sample records for tc generators compuestos

  1. Magnesium-molybdenum compounds as matrices of generators of {sup 99m} Tc; Compuestos de magnesio-molibdeno como matrices de generadores de {sup 99m} Tc

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez M, T.S.; Monroy G, F. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)]. E-mail: thania_susana@terra.com.mx

    2004-07-01

    The generator system of radionuclides more diffused, and used in the world, it is the{sup 99}Mo / {sup 99m} Tc. These use {sup 99} Mo, product of fission of the {sup 235} U of very high specific activity, adsorbed on alumina (0.2% of {sup 99} Mo/gram of alumina). An alternative for the production of generators of low activity specifies, via the reaction {sup 98} Mo(n, {gamma}) {sup 99} Mo, it is based on the use of compounds with molybdates base, as matrices of the generators {sup 99} Mo / {sup 99m} Tc. In this work is proposed to develop a generator at base of compounds of magnesium molybdates that could be irradiated after its synthesis, given the short half life of the only radioisotope produced by magnesium: {sup 27} Mg (t{sub 1/2} = 9.46 m). In this work two parameters were studied, fundamental in the preparation of the magnesium molybdates, matrices of the generators {sup 99}Mo / {sup 99m}Tc, and their influence in the efficiency and radionuclide purity: the washing of the gels previous to its irradiation and the molar ratio Mo:Mg. The magnesium molybdates non washing presents bigger efficiencies (72%), but they don't fulfill a smaller percentage to 0.015% of {sup 99} Mo, neither with a radiochemical purity of 90%, except when the molar ratio Mo: Mg of 1:1.08 which provide the best results. (Author)

  2. Magnesium-molybdenum compounds as matrixes of {sup 99m} Tc generators; Compuestos de magnesio-molibdeno como matrices de generadores de {sup 99m} Tc

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez M, T S

    2005-07-01

    In order to finding new production alternatives of {sup 99}Mo/ {sup 99m}Tc generators, easy to produce and with high elutriation efficiencies, it is proposed in this work to develop a generator with basis of magnesium and molybdenum that could be irradiated after their synthesis, given the short half life of the only radioisotope produced by the magnesium: {sup 27} Mg (t{sub 1/2} = 9.46 m). It is necessary to mention that have not been reported works in relation to this type of compound, being then important to carry out basic studies on the formation and behavior of these in relation to their matrix functions of those generated of {sup 99} Mo/ {sup 99m} Tc. In this work it was determined the effect that has, the magnesium salt used in the synthesis of those molybdenum-magnesium compounds, the molar ratio Mo: Mg, the concentration of the magnesium salt, the pH of the used ammonium molybdates in the synthesis of the final compounds and the washing of the molybdates of synthesized magnesium, in the performance of the {sup 99} Mo/ {sup 99m} Tc generators. Parameters like the elutriation efficiency, the radionuclide purity, radiochemical and chemical of the eluates and their pH, were determined in each case, also its were characterized the synthesized compounds using: neutron activation analysis (NAA), X-ray diffraction (XRD) and scanning electron microscopy of high vacuum (SEM), besides of complementary techniques: infrared spectroscopy (IR), and thermal gravimetric analysis (TGA). (Author)

  3. Effect of milking efficiency on Tc-99 content of Tc-99m derived from Tc-99m generators

    International Nuclear Information System (INIS)

    Bonnyman, J.

    1983-01-01

    Tc-99m obtained by separation from its parent Mo-99 always contains Tc-99 produced by decay of Tc-99m and Mo-99. Factors effecting the Tc-99/Tc-99m ratios are discussed. An HPLC method has been developed to measure the 99 TcO 4- content of sodium pertechnetate from generators with a detection limit of 0.9 ng Tc-99 for a 500 μl/ aliquot of TcO 4- -99m. First eluates of 10 chromatograph-ic generators gave Tc-99/Tc-99m ratios ranging from 3.5-46 ng Tc/mCi Tc-99m measured at the time of milking. The measurements indicate that Tc-99/Tc-99m ratios high enough to cause adverse labelling effects could be found in 'instant pertechnetate' and in the first eluate from Tc-99m generators for the activities normally used in radiopharmaceutical production

  4. A review of sup(99m)Tc generator technology

    International Nuclear Information System (INIS)

    Molinski, V.J.

    1982-01-01

    The sup(99m)Tc generator has found widespread use because it is ideally suited for scintigraphy. The preparation of sup(99m)Tc generators using alumina and other ion exchange systems is described. Other methods of separating 99 Mo and sup(99m)Tc, such as solvent extraction and sublimation, are also discussed. Some of the problems associated with the alumina column type sup(99m)Tc generator are listed with possible causes and solutions to their problems. The current biomedical applications of the sup(99m)Tc radioisotope are the basis of a $100 million nuclear medicine business. The importance of the sup(99m)Tc generator makes it imperative that we understand and solve the problems associated with its manufacture. (author)

  5. Quality assurance of Mo-99/Tc-99m radionuclide generators

    Science.gov (United States)

    Uzunov, Nikolay; Yordanova, Galina; Salim, Seniha; Stancheva, Natalya; Mineva, Vanya; Meléndez-Alafort, Laura; Rosato, Antonio

    2018-03-01

    Gamma-ray spectrometry analyses of the radionuclide content of eluate from two Mo-99/Tc-99m radionuclide generators POLTECHNET have been performed. The relative activities of 99Mo 103Ru and 131I radioisotopes with respect to the activity of 99mTc at different time intervals after the primary pertechnetate elution of the generators have been analyzed. The relative activities of the isotopes were determined and compared to the radionuclidic purity requirements for 99mTc.

  6. Production of 99Tc generators with automatic elution

    International Nuclear Information System (INIS)

    Mengatti, J.; Yanagawa, S.T.I.; Mazzarro, E.; Gasiglia, H.T.; Rela, P.R.; Silva, C.P.G. da; Pereira, N.P.S. de.

    1983-10-01

    The improvements performed on the routine production of sup(99m) Tc-generators at the Instituto de Pesquisas Energeticas e Nucleares-CNEN/SP, are described. The old model generators (manual elution of sup(99m) Tc) were substituted by automatically eluted generators (Vacuum system). The alumina column, elution system and acessories were modified; the elution time was reduced from 60 to 20-30 seconds. The new generators give 80-90% elution yields using six mililiters of sodium chloride 0,9% as sup(99m) Tc eluant instead of the 10 mililiters necessary to eluate the old generators. So, the radioactive concentrations are now 70% higher. The radioactive, radiochemical, chemical and microbiological criteria were examinated for sup(99m) Tc solutions. Like old generators, automatic generators were considered safe for medical purpose. (Author) [pt

  7. Alternative generators of the 99mTc

    International Nuclear Information System (INIS)

    Khujaev, S.

    2004-01-01

    9 9mTc is the most widely used radionuclide in nuclear medicine. 9 9mTc radionuclide is obtained from a generator, in which 9 9Mo servest as the parent radionuclide. In the generator 9 9mTc and 9 9Mo radionuclides are found in genetic balance and 9 9mTc radionuclide is chemically extracted from the system periodically. Although there already exists many ways and variants of manufacturing 9 9mTc generators, search for new variants of the 9 9Mo → 9 9mTc generator systems continue. An example is the investigations carried out with the support of the IAEA. In these research works, generators based on elution of poly molybdate gels have been developed and evaluated. These generators will be serving as alternative technologies for production of 9 9mTc radionuclide, which use 9 9Mo produced by non-fission means. It is known that in Australia and China more than 30% of 9 9mTc generators are gel-generators. The works of authors are devoted to the problem of searching new perspective materials as a column material that will serve as adsorbent. The main purpose of all the research on alternative technologies is the usage of parent radionuclide 9 9Mo that is obtained from 9 8Mo(n, γ) 9 9Mo reaction instead of as a fission product. Our work examines the possibility of reception of generators 9 9Mo → 9 9mTc using non-fission 9 9Mo that is based on insoluble salts of molybdate

  8. Tc Generator Development: Up-to-Date Tc Recovery Technologies for Increasing the Effectiveness of Mo Utilisation

    Directory of Open Access Journals (Sweden)

    Van So Le

    2014-01-01

    Full Text Available A review on the Mo sources available today and on the Tc generators developed up to date for increasing the effectiveness of Mo utilisation is performed in the format of detailed description of the features and technical performance of the technological groups of the Mo production and Tc recovery. The latest results of the endeavour in this field are also surveyed in regard of the technical solution for overcoming the shortage of Mo supply. The technological topics are grouped and discussed in a way to reflect the similarity in the technological process of each group. The following groups are included in this review which are high specific activity Mo: the current issues of production, the efforts of more effective utilisation, and the high specific activity Mo-based Tc generator and Tc concentration units; low specific activity Mo: the Mo production based on neutron capture and accelerators and the direct production of Tc and the methods of increasing the specific activity of Mo using Szilard-Chalmers reaction and high electric power isotopic separator; up-to-date technologies of Tc recovery from low specific activity Mo: the solvent extraction-based Tc generator, the sublimation methods for Mo/Tc separation, the electrochemical method for Tc recovery, and the column chromatographic methods for Tc recovery. Besides the traditional Tc-generator systems, the integrated Tc generator systems (Tc generator column combined with postelution purification/concentration unit are discussed with the format of process diagram and picture of real generator systems. These systems are the technetium selective sorbent column-based generators, the high Mo-loading capacity column-based integrated Tc generator systems which include the saline-eluted generator systems, and the nonsaline aqueous and organic solvent eluent-eluted generator systems using high Mo-loading capacity molybdategel and recently developed sorbent columns. Tc concentration methods used in the

  9. Status of Tc-99m and 99Mo/99mTc generator production in Bangladesh

    International Nuclear Information System (INIS)

    Abedin, Md. Zainul; Haque, Md. Azizul; Ali, Md. Ramjan; Hossain, Md. Anwar; Razzaque, Md. Abdur; Yasmin, Lyzu; Waheed, M. Fatima; Akhter, Rabeya; Mondal, Rafiuddin

    2007-01-01

    Radioisotope Production Division (RIPD) produced instant technetium-99m by solvent extraction method for several years. On R and D basis, the division produced portable sterile Tc-99m sublimation generator by irradiating titanium molybdate in the reactor. The division produced (4/batch) from imported fission Mo-99 till June 2005. Since August 2005, as per demand of the government hospitals, the division have been producing 12-14 pieces of 15 GBq chromatographic 99m Tc-generators weekly by using the new generator production plant installed last year having online Mo-99 loading system with the of producing 50 generator per batch. Development of PZC and (n,γ) 99 Mo based generator holds potential in Bangladesh. (author)

  10. Use of 99mTc from a commercial 99Mo/9mTc generator as yield tracer for the determination of 99Tc at low levels

    DEFF Research Database (Denmark)

    Hou, Xiaolin; Jensen, Mikael; Nielsen, Sven Poul

    2007-01-01

    The concentrations of Tc-99 and impurity radionuclides in the Tc-99m tracer solution obtained from a commercial Mo-99/Tc-99m generator were measured by gamma spectrometry and liquid scintillation counting. Mo-99 and Ru-103 were found in the Tc-99m eluate. A simple separation using two extra alumina...... cartridges was investigated to purify the eluate to obtain a suitable Tc-99m tracer with low Tc-99 concentration. The activity ratio of Tc-99/Tc-99m in the prepared Tc-99m solution is lower than 15 x 10(-9), which is higher than the theoretical ratio of less than 10 x 10(-9). The possible reason is discussed....... The Tc-99 in the 20 kBq spiked Tc-99m tracer was found to be less than 0.3mBq, which is lower than the detection limit of the radiometric method used for environmental samples. The purified Tc-99m eluate is used as yield tracer for the determination of low levels of Tc-99 in environmental samples. (c...

  11. Method to produce a sup(99m)Tc generator

    International Nuclear Information System (INIS)

    Brown, J.L.; Harris, O.A.

    1977-01-01

    A 400 millicurie Tc generator for medical application is made on the basis of chromatographic Al 2 O3 plased in a glass generator clumn. The Al 2 O 3 is subjected to thermal activation at 394K. A charge with sodium molybdate 99 solution training a pH value of 3.5 fallowe. After washing the generator with acetic, a 0.9% NaCl solution is added. The remaining solution is sucked off by introducing air through the column. The eluate has a molybdenum cost ent of 0.001 to 0.005 μCi Mo/mCi Tc 99m. The pH-value of the eluate is between 5.0 and 5.3. The aluminium ion content is less than 0.3 g/ml. (DG) [de

  12. Installation of Tc-99m generator manufacturing facilities

    International Nuclear Information System (INIS)

    Shin, B. C.; Choung, W. M.; Park, J. H.; Park, S. H.; Kim, S. J.; Park, K. B.

    2004-01-01

    For the characteristics of radiopharmaceuticals, the manufacturing facility should be complied with the radiation safety standards for operators as well as GMP (Good Manufacturing Practice) cleanness standards for production. We intensively modified the existing Radioisotope production facilities, which were installed only in radiation safety points of view, to meet cleanness criteria. And the concept of multi-barrier buffer zones was introduced to apply negative air pressure for hot cell with first priority and to continue relative positive air pressure for clean room. The manufacturing area for Tc-99m Generator can be entered only through a second change. The doors of each change area are interlocked to maintain air pressure differentials. The pass box for material transfer are also interlocked so that only one side may be opened at any one time to keep cleanness. Two door-type autoclave was installed crossing the wall between preparing room and aseptic room to keep cleanness after sterilization. Three lead hot cells were installed and final inspection including gamma survey test were performed. The clean room was installed and TAB for this facility was performed in order to acquire the necessary air flow. The filter bank for filtration of exhausted radiation air was installed and its efficiency test was performed. In this facility, radiation shielding utilities and manufacturing instruments were set up and their operating manuals were documented. Efficiency tests for every utilities and instruments were satisfied and the approval for use of the facilities was achieved from MOST (Ministry of Science and Technology). The Sam Young Unitech, the lessee of the facilities set up the equipment in the hot cell, which is needed to produce Tc-99m Generator, supported by IPPE in Russia. They are composing the systems complied with the guidelines and the regulations, and keep in contact to KFDA for acquiring its approval. It is expected to produce Tc-99m Generator within

  13. Concentration of sup(99m)Tc from the eluate of 99Mo-sup(99m)Tc generators

    International Nuclear Information System (INIS)

    Saucedo, T.; Mora, M.; Fraga de Suarez, A.H.; Mitta, A.E.A.

    1976-04-01

    A method is described to concentrate sup(99m)Tc solutions, originated in 99 Mo-sup(99m)Tc generators, independent of its age. The techniques of preparation of the different radiopharmaceuticals used in nuclear medicine are also described. (author) [es

  14. Determination of 99Mo contamination in 99mTc elute obtained from 99Mo/99mTc- generator

    International Nuclear Information System (INIS)

    Momennezhad, M.; Zakavi, S. R.; Sadeghi, R.

    2010-01-01

    99m Tc is a widely used radioisotope in nuclear medicine centers which is obtained by elution from Mo-99/Tc-99m generators. Usually the generators are either supplied by the Iran Atomic Energy Agency or by private companies from foreign countries. In this study we have measured 99 Mo contamination in 99m Tc elute from different generators in a period of one year. Materials and Methods: The radionuclide impurity of the 99m Tc elute were studied in two types of radionuclide generators (A: produced in Iran and B: Imported from other country). In-vitro measurements were performed using dose calibrator. Direct measurements were made, using a standard canister at the time of milking of the generators and also in Subsequent hours after milking. Results: The results showed a mean of 99 Mo impurity in generators A and B to be 0.00932±0.0043 and 0.0170±0.0127 respectively. Although the results showed that the 99 Mo contamination in 99 mTc elute was lesser than the maximum accepted activity limit of 0.015%, the difference in these two types may reflect different methods of productions of generator, as well as the quality control procedures. Conclusion: The mean of 99 Mo contamination in generators produced in Iran Atomic Energy Organization was lesser than generators imported from foreign origin.

  15. Pharmaceutical grade sodium (99mTc) pertechnetate from 99Mo/99mTc-TCM-Autosolex generator

    International Nuclear Information System (INIS)

    Chattopadhyay, Sankha; Barua, Luna; Das, Sujata Saha

    2014-01-01

    Technetium-99m (T 1/2 = 6.02h; 140.51 keV (89%)) is the most useful radioisotope in diagnostic nuclear medicine. More than 80% of all diagnostic procedures done worldwide in nuclear medicine centre are performed with 99m Tc. Worldwide crisis of fission 99 Mo based generator in recent past had put the nuclear medicine fraternity in very harsh situation. In order to have an indigenous solution of this problem, we tried to develop a computer controlled semi automated 99 Mo/ 99m Tc generator using MEK solvent extraction technique, which utilizes abundantly available 99 Mo produced by (n,γ) reaction in BARC reactors. The aim of this work is to provide a more reliable, computer controlled module (TCM- AUTOSOLEX) for the recovery of pharmaceutical grade 99m Tc from low specific activity 99 Mo based on solvent extraction methodology

  16. A proposal for spreading and commercializing the (n, gamma) 99Tc generator

    International Nuclear Information System (INIS)

    Yoshida, Kosuke; Hishinuma, Yukio; Tatenuma, Katsuyoshi

    2006-01-01

    A practicability of 99m Tc generator based on (n, gamma) method using PZC (Poly Zirconium Compound), a Mo adsorbent with a high adsorption efficiency, has been studied by the FNCA member countries as a part of the FNCA activities; three research collaboration projects, Technetium Generator Project (TCG), Neutron Activation Analysis Project (NAA) and Neutron Spreading Project (NS) have been set up in order to achieve the significant results of the research reactor use among Asian countries. As a result of the collaboration research, practical data on the 99m Tc elution and 99 Mo breakthrough has recently been obtained by using the new 99m Tc generator based on (n, gamma) method using PZC (indicate 'PZC- 99m Tc generator' as follows). Even though unexpected amount of 99 Mo breakthrough accompanied with the 99m Tc elution treatment were currently occurred, the problem has been solved by subsequently adding an alumina column underneath the generator column containing PZC. In accordance with the realization of the practical PZC- 99m Tc generator, an administering tests to the mice with labeled compound of 99m Tc generated by PZC method have already been started by BATAN, a loading machine to simplify the process of the 99 Mo adsorption to PZC and the 99 Mo-PZC packing to a generator column has been fabricated in BATAN's hot cell to realize a mass production of PZC- 99m Tc generator, and moreover the Japanese and Indonesian patents pertaining to the production process and the loading machine of PZC- 99m Tc generator have been applied with joint application of BATAN and KAKEN Co. By the current collaboration approaches mentioned above, it is clear that the Technetium Generator Project of FNCA is now reaching to a phase where the aims of the project shall be turned from establishment of the practical PZC- 99m C generator to establishment of the delivery system of PZC- 99m Tc generator to put them into commercial use. In this paper, a practical application of the PZC- 99m

  17. Investigation on the performance of polymer zirconium compound (PZC) for chromatographic Tc-99m generator preparation

    International Nuclear Information System (INIS)

    Le Van So

    2004-01-01

    The performance of PZC was investigated for chromatographic Tc-99m generator preparation. Mo-adsorption of PZC in different Mo-solutions and Tc-99m elution of 99 Mo-PZC column were studied. Mo- adsorption capacity of higher than 250mgMo/gPZC and Tc-99m elution yield of higher than 80% were achieved with PZC adsorbent. Mo-99 breakthrough of 0.02% and Molybdenum element breakthrough of around 5μg Mo/ml were found in Tc-99m eluate. A good relationship between the Mo-content of adsorption solution and the Mo-adsorption capacity, adsorption percentage, Mo-breakthrough and Tc-99m elution yield was found. The preparation of PZC based Tc-99m chromatographic generator with 4 gram weight of PZC was successfully conducted. (author)

  18. '99Mo/99mTc Generator Based on High Radionuclidic Pure Zirconium Molybdate Gel

    International Nuclear Information System (INIS)

    Amin, M.; Mostafa, M.; El-Amir, M.A.; El-Absy, M.A.; Mohamed, O.I.; Farag, A.B.

    2014-01-01

    99 Mo / 99 mTc radioisotope generator was prepared using in-situ precipitated zirconium molybdate chromatographic column. Zirconium molybdate gel matrix was synthesized by precipitation of neutron activation molybdenum-99 from its solution after variety purification processes to prevent contamination of the 99m Tc eluate with cross-contaminants. Greeter than 82.7 ± 0.4 % of the generated 99m Tc was immediately and reproducible eluted by passing 10 ml 0.9 % NaCl solution through the 1 g zirconium molybdate- 99 Mo column matrix at a flow rate of 0.5 ml / min and room temperature with high chemical, radionuclide ( ≥ 99.9 % 99m Tc) and radiochemical purity ( ≥ 97.7 % % as 99 mTcO 4 - ) with ph value suitable for medical uses.

  19. Current status of research and development of 99Mo/99mTc generator in Korea

    International Nuclear Information System (INIS)

    Park, U.J.; Lee, J.S.; Son, K.J.; Nam, S.S.; Kwak, S.I.; Han, H.S.

    2006-01-01

    To supply 99m Tc in stable and economical manner in Korea, a chromatographic generator has been under development at KAERI since late 1980's. The chromatographic type of technetium generator is preferred in hospital because it is more convenient and less time-restricted for applications. Hence, the demand of 99m Tc in medical applications is keep increasing. In Korea, there are more than 200 gamma cameras including SPECT in hospitals. For these applications, approximately 100 units/week of 99m Tc generators of which annual cost reached 3 million US dollars were required in 2002. Hence, the development of 99m Tc generators and technology of fission 99 Mo processing were started while installing the generator loading facility (GLF) at KAERI. This facility is currently on a trial run for the commercial production of 99m Tc generators and expected to produce more than 200 generators per week in 2004. For the fission 99 Mo production, an annulus U foil target was considered as the LEU target. The designed LEU target is being used for target manufacturing test and accident analysis. The develop gel type 99m Tc generators by using a poly zirconium complex (PZC) and alumina column, KAERI has cooperated with a Japanese company since late 1990's. In 2003, experimental studies for molybdate adsorption capacity and elution characteristics of the PZC samples from three different batches produced by Kaken Co. were carried out. (author)

  20. Strategies toward the commercialization PZC-based Tc-99m generator in the Philippines

    International Nuclear Information System (INIS)

    Borras, Ma. Teresa L.; Sombrito, Elvira Z.; Dela Rosa, Alumanda M.; Osorio, Rizalina G.; Bulos, Adelina DM.

    2007-01-01

    Technetium-99m ( 99m Tc) is the most widely used radioisotope in nuclear medicine. It accounts for more than 80% of the total demand for radioisotopes. Alone or conjugated with other ligands, it is very useful in the imaging and scanning of various organs such as the brain, lungs, kidneys, liver, thyroid and bone and in the diagnosis of metabolic disorders. It is imported to the country as 99 Mo- 99m Tc generators. These commercial generators use fission molybdenum adsorbed onto alumina column. A Draft Business Plan for the Production of PZC 99 Mo- 99m Tc Generator in the Philippines was presented during the FNCA 2005 Workshop on the Utilization of Research Reactors, August 08-12, 2005. The Philippine Nuclear Research Institute (PNRI) proposed in the draft business plan, the commercial production of PZC generator through the establishment of a facility for the in-house production of 99 Mo- 99m Tc generators. The radioisotope laboratory of the Irradiation Services Unit will be renovated to house the PZC based 99 Mo- 99m Tc generator experiment/production facility. Since the research reactor is on extended shutdown, the supply of 99 Mo will be sourced out from neighboring countries. Information dissemination and promotions will be made in order to bring this PZC based 99 Mo- 99m Tc generator to the nuclear medicine users. (author)

  1. Synthesis and characterization of zirconium molybdates of 99 Mo/99m Tc generators

    International Nuclear Information System (INIS)

    Contreras R, A.; Monroy G, F.; Diaz A, L.V.

    2002-01-01

    The zirconium molybdates are gels which are used as cation exchangers in the production of 99 Mo/ 99m Tc generators. The synthesis method and the characterization of these gels by thermogravimetry, infrared spectroscopy and X-ray diffraction is presented with the purpose of finding which the factors are that influence in the efficiency of the 99m Tc production. The results show that the quantity of molecular water contained in gel, is possibly the cause of variations of the efficiencies of the 99 Mo/ 99m Tc generator. (Author)

  2. The trend of 99mTc generator in FNCA countries

    International Nuclear Information System (INIS)

    Genka, Tsuguo; Machi, Sueo

    2004-01-01

    In the 2001 Workshop on Utilization of Research Reactors held in Beijing, eight delegates from the FNCA countries, namely China, Indonesia, Japan, Korea, Malaysia, the Philippines, Thailand and Vietnam, for the 99m Tc Generator Project, presented papers or orally pleaded the current status of utilization and production in terms of 99 Mo solution, 99 Mo/ 99m Tc generator or extracted 99m Tc solution in each country. This paper is a brief compilation of these topics and some additional information obtained afterward the workshop. (author)

  3. A {sup 99m}Tc Generator using PZC for (n,{gamma}) {sup 99}Mo

    Energy Technology Data Exchange (ETDEWEB)

    Adang, H G; Mutalib, A; Suparman, I; Hamid,; Purwadi, B; Pancoko, M; Setiowati, S; Yulianti, V; Robertus, D H [Radioisotope Production Center, National Atomic Energy Agency Kawasan PUSPIPTEK, Serpong (Indonesia)

    1998-10-01

    The high performance adsorbent Poly Zirconium Compound (PZC) was produced by Department of Radioisotope, Japan Atomic Energy Research Institute. This compound was developed as an adsorbent for natural Mo (n,{gamma}) {sup 99}Mo-{sup 99m}Tc Generator. In the present paper, we report the performance of the PZC for a {sup 99m}Tc Generator which was focused on the yield, on elution profile and {sup 99}Mo breakthrough. (author)

  4. Milking technique of sup(99m)Tc generators and labeling efficiencies

    International Nuclear Information System (INIS)

    Salehi, N.; Guignard, P.A.

    1985-01-01

    Increased levels of 99 Tc in generator produced sup(99m)Tc have an adverse effect on the labelling efficiency of red blood cells and human serum albumin. A two-step milking technique in which the first 1-2 ml of eluate is discarded has been found to produce higher and more constant labelling efficiency of lymphocytes and platelets than a one-step procedure. Binding efficiency of platelet-rich plasma and lymphocytes with sup(99m)Tc is greater in the two-step technique. High activity concentration in the eluate for critical labelling is between 1.5-3 ml. (U.K.)

  5. Results of regular study on radionuclidic purity of sup(99m)Tc obtained from 99Mo-sup(99m)Tc generators

    International Nuclear Information System (INIS)

    Vlcek, J.; Rohacek, J.; Husak, V.

    1979-01-01

    A total of 39 sup(99m)Tc eluates obtained from 9 99 Mo-sup(99m)Tc generators delivered by The Radiochemical Centre Amersham during one year was studied with regard to their radionuclide purity. Using a Ge(Li) spectrometer the contaminants 60 Co, 103 Ru, 131 I, 134 Cs, 140 La and 188 Re were found in sup(99m)Tc-eluates with average levels ranging from 2.9 x 10 -3 to 2.8 x 10 -1 per cent of sup(99m)Tc activity. The additional total body absorbed dose caused by these contaminants, as calculated from their average content in sup(99m)Tc eluates, was less than 1% of the dose due to sup(99m)Tc pertechnetate. (orig.) 891 MG/orig. 892 CS [de

  6. Progress on the Development of (n,γ)99Mo/99mTc generator, an Alternative of Conventional Generator

    International Nuclear Information System (INIS)

    Lee, Jun Sig; Choi, Seung Rag; Nam, Seong Su; Park, Ul Jae; Son, Kwang Jae; Choi, Kang Hyuk; Choi, Sun Ju

    2010-01-01

    Even though different types of generators have been developed to extract 99m Tc, most of the generators uses 99 Mo from the fission products as the mother radionuclide of 99m Tc. Recently, the crisis of 99 Mo production becomes one of the international issues as 99m Tc is a dominant diagnostic radionuclide. The shortage of 99m Tc has been predicted in the society for more than 10 years. However, actions to prevent such crisis were slow as the initial investment to construct a new research reactor for the production of 99 Mo is high. Currently, it is expected the shortage of 99m Tc will last at least for more than 5 years. As an alternative to minimize such crisis, a new approach is proposed and studied. In this approach, the mother source of 99m Tc comes not from fission products but from the neutron irradiation of molybdenum oxide. Hence, most of the research reactors, which do not have capability to produce fission molybdenum, (n,f) 99 Mo can produce 99 Mo. The key issue in this approach is the uptake capacity of the generator column for (n, γ) 99 Mo, which has extremely low specific activity compared to (n,f) 99 Mo. Currently, the results from the research activities at Korea Atomic Energy Research Institute have shown such approach has enough potential as an alternative of the conventional generator. Hence, the progress of the research is reported in this paper

  7. Technetium compounds; Compuestos de tecnecio

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, C.A. de [Instituto Nacional de Ciencias Medicas y Nutricion Salvador Zubiran, Vasco de Quiroga 15, 14000 Tlalpan D.F. (Mexico); Ferro F, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    The first radiopharmaceuticals of {sup 99m} Tc, also call of 'first generation' as colloids, aggregates and simple complexes were developed with relative easiness without it was necessary a wide understanding of its chemical structure. In the radiopharmaceuticals of 'second generation' were included those derived of the HIDA for hepatobiliary images, MAG3 and EC for images of tubular renal de purification, HMPAO and ECD for images of cerebral perfusion and MIBI and tetrofosmin for images of heart perfusion, that which implies a bigger demand in terms of the chemical knowledge. At the moment, we can affirm that the future of the radiopharmaceuticals of {sup 99m} Tc is based on the use of small and relevant biomolecules with high biological activity that allow the visualization in vivo of specific receiving sites and/or its expression in diverse pathologies. It is for it that with the 'third generation' is necessary a wide one knowledge of the chemistry of the technetium that allows the design and characterization of highly specific bio complexes. In this book, although focused mainly to the chemistry of the Tc, a brief revision is also presented on the main biologically active molecules that, coordinated the {sup 99m} Tc, present a high recognition In vivo for specific receivers. (Author)

  8. 99Mo-99mTc generator - study of their performance and quality

    International Nuclear Information System (INIS)

    Acar, M.E.D.

    1987-01-01

    In this work the performance of the 99 Mo - 99m Tc generators produced at IPEN-CNEN/SP as well as the quality of the eluted solutions were analysed. The following parameters were studied: elution efficiency, chemical radiochemical, radionuclidic and microbiological purities and pH of the eluates. The 99m Tc yield ranged from 84,7 to 98,5%. The radioactivity due to the pertechnetate ion in the studied solutions was higher than 97,5%. The aluminium content in eluates, determined by spectrophotometry, was lower than 2,5 μg/ml and the pH of the solutions between 4,5 and 5,1. Radioactive impurities of the order of 10 -3 KBq 99 Mc/MBq 99m Tc and 10 -5 KBq 131 I/MBq 99m Tc were found in the eluates at the time of elution. Other γ emitting radioactive impurities were order of 10 -3 KBq/MBq 99m Tc. The eluates were sterile and pyrogen-free. From the results obtained in this work one can state that the IPEN-TEC generator is a reliable source of good quality 99m Tc-pertechnetate. (author) [pt

  9. Hydroxyapatite based 99Mo-99mTc and 188W-188Re generator systems

    International Nuclear Information System (INIS)

    Monroy-Guzman, F.; Badillo-Almaraz, V.E.; Flores de la Torre, J.A.; Cosgrove, J.; Knapp, F.F. Jr.

    2007-01-01

    This paper describes studies evaluating the use of hydroxyapatite as the adsorbent material for both 90M o- 90m Tc and 89W - 188 Re generator systems. Hydroxyapatite is an insoluble solid with anion exchange properties. A study of the sorption behaviour of 90M o, 90m Tc, 188 W and 188 Re on hydroxyapatite in NaCl medium was evaluated by batch experiments. The results demonstrated that while 90M o, 90m Tc and 188 Re are not adsorbed by the hydroxyapatite in NaCl solutions (Kd 89W is strongly adsorbed (Kd >500). On the basis of these measurements, hydroxyapatite 89W - 188 Re generator systems were then constructed and eluted in NaCl solutions. The hydroxyapatite based 89W - 188 Re generator performances are presented. (author)

  10. Procedure for the production of PZC based chromatographic Tc-99m generator to be available for clinical application

    International Nuclear Information System (INIS)

    Le Van So; Pham Ngoc Dien; Truong Hong Nghia; Nguyen Thi Thu; Nguyen Cong Duc; Vo Thi Cam Hoa; Bui Van Cuong

    2004-01-01

    The chemical synthesis for the preparation of polymer compound of Zirconium (PZC) and the column pre-loading procedure for the preparation of PZC based chromatographic Tc-99m generators were described in detail. In-process documentation, flow-chart of process, specific Tc-99m generator designs and picturially illustrative description of Tc-99 generator production process were systematically reported. The column pre-loading procedure was highly evaluated as a competent technology for the preparation of PZC based Tc-99m chromatographic generator of high performance using (n,γ) 99 Mo of low specific radioactivity produced on low power research reactors. (author)

  11. The use of 99Mo/99mTc generators in the analysis of low levels of 99Tc in environmental samples by radiochemical methods

    International Nuclear Information System (INIS)

    Dowdall, M.; Selnaes, Oe.G.; Lind, B.; Gwynn, J.P.

    2010-01-01

    The analysis of low levels of 99 Tc in environmental samples presents special challenges, particularly with respect to the selection of an appropriate and practicable chemical yield tracer. Of all the tracers available, 99m Tc eluted from 99 Mo/ 99m Tc generators appears to be the most practicable in terms of availability, ease of use and cost. These factors have led to an increase in the use of such generators for the provision of 99m Tc as yield tracer for 99 Tc. For the analysis of low levels ( 3 or kg) of 99 Tc in environmental samples, consideration must be given to the radiochemical purity of the tracer solution with respect to contamination with both 99 Tc and other radionuclides. Due to the variable nature of the extent of the interference from tracer solution to tracer solution, it is unwise to try and establish a correction factor for any single generator. The only practical solution to the problem therefore is to run a 'blank' sample with each batch of samples drawn from a single tracer solution. (LN)

  12. Filtrado digital compuesto

    Directory of Open Access Journals (Sweden)

    José de Jesús Medel Juárez

    2013-01-01

    Full Text Available En este trabajo se describen las características de operación de un Filtro Digital Compuesto, el cual está formado por dos estimadores que intervienen en el filtro de Kalman; el primero de ellos corresponde al gradiente estocástico para obtener la función de transición y el segundo, ajusta la ganancia del proceso de innovación por medio de la lógica difusa. En el proceso de filtrado se cuenta con restricciones de tiempo para que su respuesta ocurra antes de que el sistema de referencia cambie a otro estado. Los resultados obtenidos están desarrollados formalmente a lo largo del documento. Se propone un Modelo Auto-regresivo de Promedios Móviles (MARPM (1,1 como sistema de referencia. El algoritmo de filtrado fue desarrollado con el programa MatLab® obteniendo las gráficas de su operación, convergencia y respuesta. Concluyendo con un pequeño análisis de los resultados.

  13. Study of the viability of hydroxyapatite as matrix of the generator 99 Mo/99m Tc

    International Nuclear Information System (INIS)

    Aguilar D, I.C.; Badillo A, V.E.; Monroy G, F.

    2004-01-01

    The generator more used in the nuclear medicine it is the generator 99 Mo / 99 Tc. The separation of 99 Mo and 99m Tc in the commercial generator is carried out on a column that contains alumina (Al 2 0 3 ). The adsorbent proposed in this investigation work, the hydroxyapatite, is an insoluble solid considered within of the fixers of anions more important. To evaluate the efficiency of the hydroxyapatite in the separation of the Mo and the Tc they were carried out preliminary tests to know the likeness of the one been accustomed to by the molybdate ions (MoO 4 -2 ) and the pertechnetate ions (Tc0 4 - ) in function of the value of the p H, in a solution of CaCI 2 0.01 M. For the study of the retention of the molybdate ion, it was used the radioisotope Mo-99 fission product, and for the pertechnetate ion it was used the Tc- 99 m radionuclide son of the Mo-99. The obtained results in a solution of CaCl 2 0.01 M to different values of p H of the solution, show that the fixation of the pertechnetate ions (TcO 4 - ) and the fixation of the molybdate ions (MoO 4 -2 ), they present very different behaviors in the hydroxyapatite. The results indicate that the synthetic hydroxyapatite BIO-RAD retains to the molybdate ion to values of lightly acid p H (5-6), being the retention of the pertechnetate practically worthless. (Author)

  14. Generators of 99Mo-99mTc

    International Nuclear Information System (INIS)

    Robles, A.M.

    1994-01-01

    Between the radioisotopes family pairs we find the 99 Molibdenum - 99m technetium pairs. Such as isotope production,decay and chemical toxic, humid and dry generators,radiation protection handling practice and blinding had been sudied in this work.Tabs

  15. Performance testing of PZC generators for 99mTc production

    International Nuclear Information System (INIS)

    Bulos, Adelina DM.

    2006-01-01

    The report briefly describes the performance testing done on seven batches of polyzirconium column (PZC) material. PZC is a ready-to-use high molybdenum-capacity column material for adsorbing reactor-produced 99 Mo. The PZC material was manufactured by Kaken Co in Japan and was sent to PNRI for performance evaluation. Fission molybdenum was eluted from a commercial 99 Mo - 99m Tc generator. The eluted 99 Mo in a molybdenum carrier solution was adsorbed on PZC through a series of procedures. The mixture was decanted to a 90 x 12 mm glass column. 99m Tc was eluted with saline solution. The parameters measured were Tc 99m yield, %molybdenum adsorption and desorption, elution profile and radiochemical purity. (author)

  16. Spent 99Mo/99mTc generator as an economical source of 99Mo

    International Nuclear Information System (INIS)

    El-Kolaly, M.T.

    1990-01-01

    An improved method for utilization and purification of 99 Mo from spent 90 Mo/ 99m Tc generators has been described. After washing the generator with saline to remove the generated 99m Tc, followed by 2 mL 5 M NaOH containing a few drops of H 2 O 2 , the 99 Mo was quantitatively eluted from the generator with 5 mL 5 M NaOH. The alkaline eluate containing 99 Mo was contaminated with partially dissolved alumina. In the present method, an anion-exchange resin Dowex 1 x 8 column was used for purification of 99 Mo from the contaminating alumina. The resultant 99 Mo was of high purity and contained 3+ /mL 99 Mo solution, as estimated by atomic absorption. (author)

  17. Harmonic generation effect in high-Tc films

    International Nuclear Information System (INIS)

    Khare, Neeraj; Shrivastava, S.K.; Padmanabhan, V.P.N.; Khare, Sangeeta; Gupta, A.K.

    1997-01-01

    Harmonic generation in thick BPSCCO and thin YBCO films are reported. The application of an ac field (H ac > H c1 ) of frequency f causes the generation of odd harmonics of frequency (2n+1)f. The application of dc field in addition to the ac field causes the appearance of even harmonics also in the BPSCCO film. However, the appearance of even harmonics is not observed in YBCO film with high J c ∼ 1.6x10 6 A/cm 2 and appearance of second harmonic with small magnitude is observed in YBCO film with low J c ∼ 2x10 3 A/cm 2 . The variation of amplitudes of these harmonics are studied as a function of magnitude of ac and dc field and the results are explained in the framework of critical state model. A high-T c film magnetometer based on the measurement of the amplitude of second harmonic has been developed whose field sensitivity is ∼ 1.5x10 -8 T. (author)

  18. Comparative evaluation of different nanostructured metal oxides for preparation of clinically useful 99Mo/99mTc generators

    International Nuclear Information System (INIS)

    Ram, Ramu; Chakravarty, Rubel; Dash, Ashutosh

    2015-01-01

    The potential of nanostructured metal oxides such as nanotitania, nanozirconia, nanoalumina and mesoporous alumina, as new generation sorbent materials for preparation of 99 Mo/ 99m Tc generator has recently been demonstrated. A comparative assessment of such materials is essential for determination of their suitability for preparation of clinically useful generators using (n,γ) 99 Mo. Characteristics which were compared included the sorption capacity, shelf-life of the generator, radioactive concentration and purity of 99m Tc for radiopharmaceutical applications. Mesoporous alumina was identified as the most suitable sorbent for ensuring sustainable production of clinical grade 99 Mo/ 99m Tc generators using low specific activity 99 Mo. (author)

  19. Magnesium-molybdenum compounds as matrices of generators of 99m Tc

    International Nuclear Information System (INIS)

    Jimenez M, T.S.; Monroy G, F.

    2004-01-01

    The generator system of radionuclides more diffused, and used in the world, it is the 99 Mo / 99m Tc. These use 99 Mo, product of fission of the 235 U of very high specific activity, adsorbed on alumina (0.2% of 99 Mo/gram of alumina). An alternative for the production of generators of low activity specifies, via the reaction 98 Mo(n, γ) 99 Mo, it is based on the use of compounds with molybdates base, as matrices of the generators 99 Mo / 99m Tc. In this work is proposed to develop a generator at base of compounds of magnesium molybdates that could be irradiated after its synthesis, given the short half life of the only radioisotope produced by magnesium: 27 Mg (t 1/2 = 9.46 m). In this work two parameters were studied, fundamental in the preparation of the magnesium molybdates, matrices of the generators 99 Mo / 99m Tc, and their influence in the efficiency and radionuclide purity: the washing of the gels previous to its irradiation and the molar ratio Mo:Mg. The magnesium molybdates non washing presents bigger efficiencies (72%), but they don't fulfill a smaller percentage to 0.015% of 99 Mo, neither with a radiochemical purity of 90%, except when the molar ratio Mo: Mg of 1:1.08 which provide the best results. (Author)

  20. Magnesium-molybdenum compounds as matrixes of 99m Tc generators

    International Nuclear Information System (INIS)

    Jimenez M, T.S.

    2005-01-01

    In order to finding new production alternatives of 99 Mo/ 99m Tc generators, easy to produce and with high elutriation efficiencies, it is proposed in this work to develop a generator with basis of magnesium and molybdenum that could be irradiated after their synthesis, given the short half life of the only radioisotope produced by the magnesium: 27 Mg (t 1/2 = 9.46 m). It is necessary to mention that have not been reported works in relation to this type of compound, being then important to carry out basic studies on the formation and behavior of these in relation to their matrix functions of those generated of 99 Mo/ 99m Tc. In this work it was determined the effect that has, the magnesium salt used in the synthesis of those molybdenum-magnesium compounds, the molar ratio Mo: Mg, the concentration of the magnesium salt, the pH of the used ammonium molybdates in the synthesis of the final compounds and the washing of the molybdates of synthesized magnesium, in the performance of the 99 Mo/ 99m Tc generators. Parameters like the elutriation efficiency, the radionuclide purity, radiochemical and chemical of the eluates and their pH, were determined in each case, also its were characterized the synthesized compounds using: neutron activation analysis (NAA), X-ray diffraction (XRD) and scanning electron microscopy of high vacuum (SEM), besides of complementary techniques: infrared spectroscopy (IR), and thermal gravimetric analysis (TGA). (Author)

  1. The risk analysis used to manufacture 99Mo/99mTc generators

    International Nuclear Information System (INIS)

    Fano Machín, Yoiz; Alberti Ramírez, Alejandro; Gamboa Marrero, Regla; Suárez Beyríes, Karina; Cruz Morales, Amed

    2016-01-01

    In this work the steps to be followed for the risk analysis in the process of production of 99 Mo / 99m Tc generators in CENTIS, using the methodology of analysis of modes and effects of failures are collected. The analysis of the type and probability of occurrence of the failures in the process, as well as the impact on the quality of the same and the probability of detection of such failures, were used for the use of techniques used in quality assurance such as: storm Ideas and cause-effect diagram. Scales were established for the determination of severity, probability of occurrence, probability of detection and calculation of the number of risk probabilities. The guidelines were laid down for the future application of this technique, which will establish a decision-making process regarding the risks associated with the production process of 99 Mo / 99m Tc generators. (author)

  2. Labeling capability of the eluent of gel-type 99Mo-99mTc generator

    International Nuclear Information System (INIS)

    Wu Xiuduo; Zhang Jingu

    1995-01-01

    The results of more than 7909 imaging of various organs which have been carried out on domestic gel-type 99 Mo- 99m Tc generators in the last seven years are presented. In all the 220 times of determination for the radiochemical purity of a portion of imaging agents, there were 15 times in which the labeling efficiency was lower than 90% and only 3 times in which the radiolabeling failed. In comparison with labeling capability of nuclear fission generators, it is showed that there are no evident differences between the eluent's labeling efficiency of the two kinds of generators

  3. The {sup 99m}Tc generator using poly zirconium chloride (PZC)

    Energy Technology Data Exchange (ETDEWEB)

    Wan Awang, Wan Anuar; Dahalan, Rehir; Kasim, Shaaban [Medical Technology Div., Malaysian Inst. for Nuclear Technology Research (MINT), Selangor (Malaysia)

    1998-10-01

    The {sup 99m}Tc generator system has been prepared using poly zirconium chloride (PZC) to replace alumina (Al{sub 2}O{sub 3}) as a adsorbent. The Mo-98 (MoO{sub 3}) was irradiated using our 1 MW TRIGA MARK II research reactor. The amount of Mo-99 adsorbed to the PZC has been studied and the yield from the elution was about 20%. (author)

  4. A draft plan for the routine production of PZC based 99mTc generator in the Vietnam

    International Nuclear Information System (INIS)

    Duong Van Dong

    2007-01-01

    This is an outline of the radioisotope production programme using a research reactor of 500 kW in Vietnam. Under the framework of Forum for Nuclear Cooperation in Asia (FNCA) cooperation program, the PZC based technology for production of 99m Tc-generator has been studied at Dalat Nuclear Research Institute (DNRI) as well as FNCA members countries in the past several years. The FNCA project has shown the feasibility of using a PZC column-reactor 99 Mo- 99m Tc-generator for commercial applications, citing mainly the cheaper cost of the PZC generator than the imported alumina column-fission 99 Mo generator and excellent technology achievement has been established and optimized by close cooperation between FNCA country members and KAKEN, JAERI. DNRI proposes in this draft business plan, the commercial production of PZC generator through the establishment of national project stage 2006-2008 for the routine production of 99 Mo- 99m Tc generator. In this national project the 99m Tc-generator will use PZC coming from KAKEN - Japan or locally synthesis as the column material, 99 Mo sourced from neighboring countries or irradiated at or reactor and the semi-automatic loading and adsorption machine will be studied, designed and installed in the hot cells available. Because the DNRI have facility 99m Tc-generator production line with two hot cells used production of the 99m Tc generator by using fission 99 Mo. The generator assembly will be designed and fabricated. (author)

  5. Magnesium-Molybate Compounds as Matrix for 99Mo/99mTc Generators

    Directory of Open Access Journals (Sweden)

    Fabiola Monroy-Guzman

    2011-01-01

    Full Text Available This work reports the preparation of a 99mTc generator based on conversion of 99Mo produced by neutron irradiation, into insoluble magnesium 99Mo-molybdates compounds as matrix. The effect of magnesium salt types and concentration, Mg:Mo molar ratios, pH of molybdate solutions, eluate volume as well as the addition order of molybdate and magnesium solutions’ influences on the final 99mTc were evaluated. Polymetalates and polymolybdates salts either crystallized or amorphous were obtained depending on the magnesium salt and Mg:Mo molar ratio used in matrix preparation. 99Mo/99mTc generator production based on magnesium-99Mo molybdate compounds allow reduction of preparation time and eliminates the use of specialized installations. The best generator performances were attained using matrices prepared from 0.1 mol/L MgCl2·6H2O solutions, ammonium molybdate solutions at pH 7 and at a Mg:Mo molar ratio of 1:1.

  6. The PZC-based Tc-99m generator preparation and its performance test

    International Nuclear Information System (INIS)

    Liu Yishu

    2007-01-01

    This paper described the preparation of Tc-99m generator prepared with Japan distributing Mo adsorbent PZC and irradiated nature MoO 3 and its performance test. Four Tc-99m generators were prepared with different batches of PZC and reactor irradiated nature MoO 3 . The adsorption capacity of PZC to Mo is approximately 200mgMo/gPZC. The adsorption efficiency of three batches PZC is good (>90%) and that of one batch of PZC is not good enough (∼83%). The loss of fine powder (The PZC is fragile) is quite different with the different preparation process of PZC. The elution efficiency is 80-90% and has the up trend with the elution date. The Mo breakthrough can be controlled to acceptable level by connecting HZO safe column containing 1.0g HZO. All the specifications of eluted from PZC-based Tc-99m generator can meet the requirements under Sodium Pertechnetate injection in China Pharmacopoeia. (author)

  7. Preparation of zirconium molybdate gel for 99mTc gel generator

    International Nuclear Information System (INIS)

    Aliludin, Z.; Ohkubo, Masatake; Kushita, Kouhei

    1988-09-01

    Zirconium molybdate gel has excellent characteristics for use as column matrix material of 99m Tc generators. In this work, zirconium molybdate gels were prepared under different conditions; pH's of molybdate solutions from 2.5 to 7.0, Mo:Zr molar ratios from 0.7:1.0 to 1.3:1.0, drying temperatures from an ambient temperature to 200 deg C, and drying times from 1 h to 25 h. Contents of water, nitrate, molybdenum and zirconium were measured to examine the fundamental conditions in gel preparation. The Mo:Zr molar ratio was 1.0:1.0 for the most of gels obtained. A 99m Tc generator was prepared with an amorphous zirconium molybdate containing a tracer level of 99 Mo as column matrix material. Elution of 99m Tc was rapid and the average elution efficiency was 90 % for 6 ml elutions. Contents of radionuclidic impurities, Zr and Mo in the eluates, were low enough to meet the pharmacopoeia requirements for human use. (author)

  8. Performance tests on column materials for {sup 99}Mo-{sup 99m}Tc generator

    Energy Technology Data Exchange (ETDEWEB)

    Sombrito, E Z; Bulos, A D; Tangonan, M C [Chemistry Research Section, Atomic Research Div., Philippine Nuclear Research Inst., Quezon (Philippines)

    1998-10-01

    To meet the need of producing a {sup 99}Mo-{sup 99m}Tc generator, based on low specific activity reactor-produced {sup 99}Mo, different procedures for preparing zirconium molybdate gels were tested. Performance tests were done on molybdate gel columns prepared using the procedures developed by Vietnam and China, and recently, on a polyzirconium compound (PZC) prepared in Japan. The conditions for the batch drying of a large volume of the gel material were studied as well as the conditions in preparing a column to concentrate technetium-99m. The performance of PZC sample as column material for the generator was also evaluated. (author)

  9. Studies of techniques for the post-elution concentration of 99mTc obtained from gel type 99Mo/99mTc generators

    International Nuclear Information System (INIS)

    Suzuki, Katia Noriko

    2009-01-01

    On average 80% of the radiopharmaceuticals used in Nuclear Medicine are labeled with 99 mTc due to its physical properties and easy attainment through of 99 Mo/ 99 mTc generators. The Directory of Radiopharmacy (DIRF) of IPEN-CNEN/SP developed a gel type chromatographic generator of MoZr with 99 Mo produced by 98 Mo(n,γ) 99 Mo reaction that occurs at the IEA-R1 Nuclear Reactor. The gel is composed of zirconium molybdate with elution volume of 12 mL with an activity of 11100 MBq (300 mCi) producing a radioactive concentration of 925 MBq (25 mCi)/mL. The fission generator gives a higher radioactive concentration around 1850 MBq (50 mCi)/mL. The aim of this work is to study a system of post-elution concentration of 99 mTc for the attainment of a high enough radioactive concentration to meet the demands of the market, with a proved quality. Two types of systems of post-elution concentration were developed: the single and the tandem. The most appropriate system for the gel generator of 99 Mo/ 99 mTc, being at the same time sterile and vacuum automated, was the tandem system using Dionex 2.5 cc/QMA cartridges. The gel generator is eluted with 10 mL of solution of 0.1% NaCl and the pertechnetate anion is retained in the QMA cartridge and further eluted with 4 mL of saline. The process takes no more than 30 minutes. The elution efficiency of the system of concentration was 90 %. At the beginning of 2009 a global crisis in the supply of 99 Mo took place making it necessary the development of alternative technologies for the production of 99 Mo/ 99 mTc generators using fission produced 99 Mo and the development of an appropriate method to extend the useful life of this generator. The results of this study showed that the same system developed for the post- concentration of the gel generator can be employed for the fission generator, using the tandem system, giving a concentration factor of 3 for the elution of 99 mTc. (author)

  10. Study to modify the elution system in a sup(99m)Tc generator

    International Nuclear Information System (INIS)

    Delgado S, Baldomero.

    1979-01-01

    The sup(99m)Tc generator is a system that allows us to obtain sup(99m)Tc through the radioactive desintegration of 99 Mo, a radionuclide absorbed in an alumine chromatographic column, the sup(99m)Tc extraction is accomplished by elution and the 99 Mo remains at the column. In this work we try to modify the elution procedure of the generator. At present after eluating the generator, it must be dried with air, in order to support the column in an oxidant atmosphere to avoid the reduction of the technetiate. This reduction causes a low yield of elution, since the reduced species of the technetium can not be eluated. The drying of the column with air complicates a little the elution procedure, and we look to simplify it, the employed methods to resolve the problem were: a) adding an oxidant agent to the elution saline solution, b) adsorbing an oxidant in the alumina chromatographic column, after that the 99 Mo was settled. In the case a) the used oxidant agents were KMnO 4 , K 2 Cr 2 O 7 , NaNo 2 , etc. At concentration rates of 10 -7 M the obtained yields in high activity generators were of the 25-30%. In the case b) variable amounts of a disolution of 2.5 mg/ml of K 2 CrO 4 were adsorbed, the obtained yields in high activity generators were about 85-90%, this second procedure was better, it lets us keep the column wet and it is not necessary to dry it with air, and in this way it can be carried out more easily and efficiently the elution procedure. (author)

  11. Process validation for the manufacturing of Tc-99m generator at Nuclear Malaysia

    International Nuclear Information System (INIS)

    Noriah Jamal; Rehir Dahlan; Wan Anuar Wan Awang; Zakaria Ibrahim; Shaaban Kassim; Wan Firdaus Wan Ishak; Nelly Bo Nai Lee; Noraisyah Yusof; Siti Selina Abdul Hamid; Ng Yen; Rahimah Abdul Rahim; Muhammad Hanafi Mohamad Mokhtar; Azahari Kasbollah; Abd Jalil Abd Hamid; Yahya Talib; Shafii Khamis; Zulkifli Mohamed Hashim

    2007-01-01

    Process validation provides the best platform in identifying potential problems in the actual radiopharmaceuticals manufacturing work. The purpose of this paper is to present experience in performing process validation for the manufacturing of Tc-99m generator at Nuclear Malaysia. Process validation for the manufacturing of Tc-99m generator was done by performing four try runs, between October 2006 to April 2007. It was done using saline instead of the actual product. Each try run took four days to complete. On day 1, clean room was cleaned and disinfected. On day 2, activity of washing and sterilization of utensils, columns, rubber stoppers and aluminium caps was carried out. On day 3, preparation of white top, alumina packed column and mixing solutions was performed. Apparatus was also sent for sterilizing test. On day 4, the actual production day of the try run by impregnating column with sterile saline was performed. Prior to the manufacturing activities, particle counts measurement and area clearance were performed to ensure that the temperature and humidity of the clean room are suitable for the production work. Settle plates were placed at the identified positions including in the Hot Cell. Personnel's finger print was performed before and after production work by using touch plates. After completion of try run, elution from the generators that been manufactured, settle and touch plates were sent to quality control unit for the microbiological test. It took fourteen days to get the test results. The first try run was failed, which may be due to insufficient of proper arrangement/preparation of work. It may also due to problem of cleaning/disinfection of clean room, which may not be done properly. The further three consecutive try runs meet all the specifications including the sterility test, endotoxin test and finger prints. It shows that the manufacturing of Tc-99m generator at Nuclear Malaysia is validated and ready for the active run. (Author)

  12. Preparation of 99Mo/99mTc generators based on 99Mo zirconium molybdates in the Gel Synthesis Device for Generators

    International Nuclear Information System (INIS)

    Lopez M, I. Z.; Monroy G, F.; Rivero G, T.; Rojas N, P.

    2008-01-01

    The 99m Tc is used for diagnosis and therapy. It is produced commercially from 99 Mo obtained from the fission of 235 U, which is retained in chromatographic columns filled with alumina whose maximum capacity is 0.2%. Given these constraints new methods of preparation 99 Mo/ 99m Tc generators have been developed using zirconium molybdates gels containing up to 30% of Mo, which is part of the generator matrix, and retaining quality and purity similar characteristics to those commercial generators. The present study aims to determine the flow of agitation, temperature and drying time optimal to prepare 99 Mo/ 99m Tc generators based on 99 Mo zirconium molybdates in the Gel Synthesis Device 99 Mo/ 99m Tc Generators designed and built by groups of the Radioactive Materials Research Laboratory and Automation and Instrumentation Department of the National Institute of Nuclear Research. (Author)

  13. Production of gel 99mTc generators for Nuclear Medicine at the Nuclear Power Institute of China, Chengdu

    International Nuclear Information System (INIS)

    Boyd, R.E.

    1996-07-01

    The development and testing of the gel-type 99m Tc generator technology has been going on for several years at the Nuclear Power Institute of China. This generator type has already been licensed by the Ministry of Health. With the co-operation of the IAEA, under Model Project CPR/2/006,it is intended to upgrade and optimise the existing facility for large scale production and continue to improve the generator performance in terms of quality and reliability of its use in nuclear medicine. The expert mission objective was to carry out final laboratory tests to assess the performance of the gel- type 99m Tc, locally produced, as well as to assess the suitability of the corresponding 99m Tc eluate for nuclear medicine studies. In particular, the expert tested the suitability of the 99m Tc for the labelling of sensitive biomolecules and its general performance in a nuclear medicine service

  14. Status of the study on PZC based Tc-99m generator and potential of its commercial production in VIETNAM

    International Nuclear Information System (INIS)

    Dong, Duong Van

    2007-01-01

    Tc-99m is the most widely used radioisotope in nuclear medicine. It has been almost produced from the decay of its parent 99 Mo by using the (n,γ) nuclear reaction with natural molybdenum. The technology requirement for this processing is simple, and is used in the most developing countries operating research reactor. Under the framework of Forum for Nuclear Cooperation in Asia (FNCA) cooperation program, the PZC based technology for production of Tc-99m generator has been studied at Dalat Nuclear Research Institute (DNRI) in the past several years. Some main activities and results of the study on PZC based Tc-99m generator at DNRI so far are given, and the estimation of future applications of PZC-type Tc-99m generator in Vietnam is also discussed in this report. (author)

  15. Present status of Mo-99/Tc-99m generator in Thailand

    International Nuclear Information System (INIS)

    Khongpetch, Pranom

    2007-01-01

    Isotop Production Program, Office of Atoms for Peace had produced technetium-99m by MEK extraction of Mo-99 obtained from (n,γ) reaction in TRIGA Mark III reactor and supplied to nuclear medicine centers in Bangkok from 1980 to 1997. Because of the difficulty to meet the increased demand and limitation of reactor operation, the production of technetium-99m was stopped in 1997. Presently, there are 21 nuclear medicine centers with 25 SPECT, 7 gamma camera and 3 PET. All nuclear medicine centers are currently using imported Tc-99m generator. (author)

  16. Design of a type - a transport package for 99Mo-99mTc Coltech generator

    International Nuclear Information System (INIS)

    Kothalkar, Chetan; Suryanarayana, G.V.; Dey, A.C.; Sachdev, S.S.; Choughule, N.; Murali, S.

    2012-01-01

    BRIT is launching a new product called 99 Mo- 99m Tc Coltech generator. The Coltech generator is a devise designed for the transport of 99 Mo radioisotope adsorbed on the acidic alumina in a sealed glass column (max dimensions: 13 mm diameter, 70 mm height) as the primary containment. At hospital end, 99m Tc, the daughter product of 99 Mo, can be eluted out from the generator using saline. The active column is fitted with a leak proof network of stainless steel needles. The glass column carrying 99 Mo is housed inside a lead shielding having minimum thickness of 50 mm all around, which serves as secondary containment. The shielding is housed inside the ABS shell which acts as tertiary containment, also provides protection to the needles, filters etc. Total weight of the generator is 16 kg. Based on the AERB code SC/TR-1 (being revised), 99 Mo- 99m Tc Coltech generator will be transported in a Type-A transport container. A transport package has been designed by following the code SC/TR-1. Principle design of the package is based on the package for transportation of the similar generator produced by POLATOM, Poland and the package is approved by the Polish regulatory authority. Components are manufactured locally taking care of lndian conditions. The package comprised of a MS drum (HOBBOCK) with tamper proof lockable MS lid and a handle to assist in lifting. For absorbing the shock during transportation, the generator assembly is packed inside the two pieces EPS top and bottom support. The package has been designed for transportation by all modes of transport. Since radioactive material is solid in form and sealed a glass column, it has been designed to sustain a free drop test of 1.2 m, in addition to other tests specified in SC/TR-1. During trial batches upto ∼ 1 Ci of 99 Mo generators were produced, packed in the same Type-A package and supplied to local nuclear medicine center RMC, Mumbai in BRIT vehicle in consultation with AERB. The radiometry of the packages

  17. Radioactive Waste Management Produced from the Generator Tc-99m Products

    International Nuclear Information System (INIS)

    Suhaedi Muhammad; Rimin Sumantri; Affan Ahmad; Tuyono

    2012-01-01

    Generator Tc-99m product is used in hospitals will result in radioactive waste both solid waste in the form of a column compacted Tc-99m Generator, bottles vials and bottles of saline fluid path series: burning of solid waste in the form of paper straw, hand gloves, and cardboard (vial packing boxes and wrapping Generator) and liquid waste form leaching results lead pot and enclosure. So that these wastes pose no radiological consequences for both humans and the environment, it must be properly managed in accordance with the provisions. In order to realize these expectations should be made so that the radioactive waste management system can be handled effectively, optimal, economical, safe and secure and in accordance with applicable regulations. Management system is in it include: procedures for handling radioactive waste, solid waste compacted, burning of solid waste management, liquid waste handling, shipment of radioactive waste and determination of the amount of radiation doses received by workers who handle radioactive waste. (author)

  18. {sup 99m}Tc generator preparation using (n, {gamma}){sup 99}Mo produced ex-natural molybdenum

    Energy Technology Data Exchange (ETDEWEB)

    Le, So Van [Nuclear Research Institute, Dalat (Viet Nam)

    2003-03-01

    Theoretical assessment on the chromatographic {sup 99m}Tc generator preparation using (n, {gamma}) {sup 99}Mo produced ex-natural molybdenum was carried out. The relationship between the neutron flux for MoO{sub 3} target activation, Mo-content or Mo adsorption capacity of column packing material, {sup 99m}Tc pertechnetate concentration and/or {sup 99m}Tc radioactivity of eluate was established. The reasonably lower limit of neutron flux of reactor and Molybdenum content of column packing material were found out to estimate the production of portable chromatographic generators available for nuclear medicine application. The concentration of {sup 99m}Tc pertechnetate eluate of low {sup 99m}Tc concentration using the column elution technique was also evaluate theoretically and conducted successfully in practice. Three options of {sup 99m}Tc generator using Titanium-Molybdate, Zirconium-Molybdate and Zirconium Oxide as generator column-packing materials were prepared and successfully put into use in nuclear medicine application. (author)

  19. Radiation-hygienic assessment of sup(99m)Tc generators

    International Nuclear Information System (INIS)

    Panfilova, N.P.; Kochetova, G.P.; Zol'nikova, N.I.; Trunov, B.V.

    1985-01-01

    Radiation-hygienic evaluation of labour conditions and degree of medical personnel irradiation during operation of short-lived radionuclide generators (of the activity 12950MBq, 18500 MBq) in radionuclide diagnosis has been made. For the purpose the exposure dose rate in working places from sup(99m)Tc generator was determined. Simultaneously, operation by operation timing at all the sta.oes of technological process is carried out. Measurements are realized at four levels (head, breast, pelvis, hands). It is shown, that total personnel dose at the first day of operation with generator constitutes 8.64 mR to hands, 1.12 mR to head, 2.333 mR to breast, 1.309 mR to pelvis

  20. Performance tests on new chromatographic material for 99Mo-99mTc generators

    International Nuclear Information System (INIS)

    Sombrito, Elvira Z.; Bulos, Adelina D.M.

    2004-01-01

    Technetium-99m continues to be the main workhorse of nuclear medicine in the Philippines. Almost 13TBq of 99m Tc was imported to the country in 2002 supplied as 99m Tc- 99 Mo generators. These generators make use of fission molybdenum adsorbed onto an alumina column. Problems associated with the alumina chromatographic generators arise due to safety and economic issues that would be remedied by gel-type generators using low specific activity reactor-produced molybdenum-99 adsorbed on a high capacity gel column material. The Philippine Nuclear Research Institute (PNRI) exerted efforts in this direction by developing a gel-type column, which showed satisfactory molybdenum adsorptive capacity. Likewise, Kaken Co. in Japan in cooperation with Japan Atomic Energy Research Institute (JAERI) developed a dried form of a gel-type polyzirconium compound (PZC). It is a ready-to-use high molybdenum capacity column material for adsorbing reactor-produced molybedum-99. The performance of this material is being tested under the framework of the FNCA project on Research Reactor Utilization. Performance tests on four batches of PZC were performed using fission molybdenum eluted from a 99 Mo- 99m Tc generator. A total of 3.3 GBq 99 Mo was extracted from an alumina column of a commercial generator and mixed with carrier molybdenum solution. About 0.67 GBq was loaded into each of the 12 x 90 mm column. One batch was prepared and distributed in 1999 and tests showed very poor elution yield of 30%. Three recent batches of PZC (2002) gave elution yields of 71% (Range of 69-75). The adsorptive capacity is 99% with about 4% desorption rate. Elution volume is at 5-6 ml. Daily elution for five days gave from 1.6 to 5.5% variability. The tests were performed all at the same time and a trend of improving elution yield and consistency of daily elution yield was observed with the time of testing nearer to the sample preparation date. X-ray diffraction analysis showed an amorphous structure for

  1. Generator of 99m Tc with MnO2 as support of 99 Mo

    International Nuclear Information System (INIS)

    Granados C, F.; Serrano G, J.

    2002-01-01

    The generator of 99m Tc with MnO 2 as support of 99 Mo was studied. By mean of static experiments the retention of 99 Mo in MnO 2 in function of the stirring time and of the p H value of the solution of 99 Mo. It was found that the 99 Mo presents 100% of retention in MnO 2 in the rank of p H 3-11 and the balance was reached before of 10 minutes. In dynamic conditions the retention of 99 Mo in MnO 2 at p H=5 was also higher: 99.72%. The generated 99m Tc can be separated from 99 Mo, adsorbed in MnO 2 packed in the column, using distilled water at p H=5 or NaCl solution at 0.9%. With saline solution the elution yields were greater than 80% and only an aliquot of 5 ml was necessary for obtaining this yield. The better results were obtained when the column was packed with 1 g of MnO 2 . The water and the saline solution were passed through of the column with a flux of 1.25 ml/min. (Author)

  2. Optimization of the 99m Tc generator with hydrotalcite as support of 99 Mo

    International Nuclear Information System (INIS)

    Aranda O, N.

    2004-01-01

    In the last years, in the laboratories of the National Institute of Nuclear Investigations (ININ) its have been investigating to the hydrotalcite like a material of support of the 99 Mo with the purpose of developing a new technetium generator. During the development of the investigations it has been demonstrated that when putting in contact to the HTC with an aqueous solution that contains anions of any type, the HTC re hydrate and the structure is regenerated to laminate of the hydrotalcite. If the present anions in the solution are molybdate anions (MoO 4 2- ), these anions passed to be part of the structure of the hydrotalcite (HT-MoO 4 ). These anions can contain, in turn, 99 Mo in their composition ( 99 MoO 4 2- ) and equally they can pass to be part of the structure of the hydrotalcite forming the HT- 99 MoO 4 . When the HT- 99 MoO 4 is packed in a column, the 99m Tc that it takes place when decaying the 99 Mo radioactively can separate the column using aqueous solution of NaCl. This way, in previous studies (Serrano, 2000) it was found that the aqueous solution of NaCl to 0.5% it is the but appropriate for elutriate at the 99m Tc from the column the yield of the elution of the 99m Tc was since high (98%) in the first elution, and the radionuclide contamination caused by the presence of 99 Mo in the eluate it was low ( 4 2- for gram of HTC). These facts, standing out the high capacity of the HTC to retain molybdate ions, they drove from a direct way to investigate the optimization of the generator of 99m Tc, with hydrotalcite like support of the 99 Mo, using 99 Mo of low specific activity. This finishes radioactive material it can be obtained by the irradiation of the 98 Mo (in the chemical form of MoO 3 or (NH 4 ) 2 MoO 4 ), with a flow of thermal neutrons in the nuclear reactor TRIGA Mark lll that one has in the Nuclear Center N abor Carrillo Flores . The technetium generators with alumina like support of the 99 Mo use 99 Mo of high specific activity

  3. Preparation of chromatographic and solid-solvent extraction 99mTc generators using gel-type targets

    International Nuclear Information System (INIS)

    Le Van So

    2000-01-01

    We have studied two types of targets zirconium-molybdate (ZrMo) and titanium-molybdate (TiMo) prepared by precipitating reaction between ammonium-molybdate and zirconium-chloride or titanium-chloride solutions, respectively. Other types of targets were also prepared by co-precipitating ZrMo or TiMo with hydrous manganese-dioxide, hydrous silica, and hydrous titanium-dioxide or by impregnated ZrMo or TiMo with Iodate anions. The results on extraction of Tc-99m from neutron irradiated TiMo solid phase using solvents such as MEK, aceton, ethylic ether, chloroform, etc showed that separation yield (SY) of Tc-99m in case of aceton extraction was from 70% to 80% and in other cases non higher than 40%. The Tc-99m elution curves and column kinetic in case of aceton extraction (after evaporation of aceton and recovery of Tc-99m in 0,9% NaCl solution) was superior than in case chromatographic generator using saline eluant. As result obtained, two types of generators were successfully prepared and put into use: Chromatographic generator using titanium-molybdate target as packing material and saline as eluant. Solid-solvent extraction 99m Tc generator using titanium-molybdate target (as solid phase) and aceton as extracting solvent. (author)

  4. Study of gels of molybdenum with cerium in the preparation of generators of 99Mo-99mTc

    International Nuclear Information System (INIS)

    Moraes, Vanessa; Marczewski, Barbara; Dias, Carla Roberta; Osso Junior, Joao Alberto

    2005-01-01

    99m Tc has ideal nuclear properties for organ imaging in nuclear medicine, and it is obtained from the 99 Mo- 99m Tc generator. Four different types of generators are available: chromatographic that uses 99 Mo from fission of uranium; MEK solvent extraction; Tc 2 O 7 sublimation; gel chromatographic. This work presents the preparation of gel generators of molybdenum with cerium and characterization of the gels: mass ratio between molybdenum and cerium, structure, size of particles and elution percentage of 99m Tc after irradiating the gels. Eight gels were prepared at the same temperature of 50 deg C with concentrations of NaOH of 2 and 4 mol/L, mass ratio of 0.31 and 0.38 and final pH of 3.5 and 4.5. The analysis of the results proved that these gels are not adequate for preparation of the generators of 99 Mo- 99m Tc, since the elution percentages are low, when compared with the gel of molybdenum with zirconium.(author)

  5. Measurement of Mo-99 column activity in the evaluation of Mo-99/Tc-99m generator

    International Nuclear Information System (INIS)

    Kuster, Z.

    1994-01-01

    In order to calculate the real elution efficiency of Mo-99/Tc-99m generator the Mo-99 content on the column has to be previously determined. As found in this work, the external measurement of Mo-99-column activity by means of Geiger-Mueller counter is a simple, fast and reliable method. Generally, Mo-99-column is placed slightly out of the center of the generator; therefore the externally measured flux of photons (φ) is an angular-dependent function. If the thickness of the lead container is radially uniform, the flux measured at some distance from the generator (which is rotated in 2π/3 steps) is given by the equation φ = A (1 + Bcos (α-2π(i - 2)/3)) -1 , i=1,2 or 3 (Eq.1) where A is a numerical constant depending on the Mo-99-column activity, B is a numerical constant depending on the Mo-99- column position within the lead container, the angle α depends on the initial orientation of the generator. A total of 20 generator were studied. The measured Mo-99-column activities (Capintec dose calibrator) were in the range 13.1- 35.11 GBq. Contrary to the findings of Vinberg and Kristensen (Eur J Nucl Med 1/1976(219), values of A (Eq. 1) are in good correlation (r 2 =0.9794) with the measured Mo-99-column activities. (author)

  6. Minimizing Molybdenum 99 contamination in Technetium 99m Pertechnetate from the elution of 99Mo/ 99m Tc Generator

    International Nuclear Information System (INIS)

    Zakaria Ibrahim; Zulkifli Hashim; Bohari Yaacob

    2011-01-01

    Radioisotope Tc-99m is widely used for variety of nuclear medicine diagnostic procedures. For many commercial applications, it is prepared in a portable type generator. Nuclear Malaysia has been producing a dry type alumina chromatographic column generator utilizing fission Mo-99. This injectable Tc-99m must meet the British Pharmacopeia [1] product specification prior to be apply on patient. This paper provides a method to minimize the up to acceptable level Mo-99 in the final product. Purposely made pertechnetate contaminated with Mo-99 and re-eluate by using old generator. Excellent removal of Mo-99 impurity was achieved and more than 80 % of Tc-99m total activity was recovered. (author)

  7. Improvement of Safety Features in Standard Operation Procedure of Tc-99m Generator

    International Nuclear Information System (INIS)

    Manisah Saedon; Mohd Khairul Hakimi; Shyen, A.K.S.

    2011-01-01

    This paper describes the improvements proposed to the original production procedures for Tc-99m generators. Improvements are intended to add safety and health features for workers into the existing procedures. The difference between the new safe work procedures from the original work procedures; is the concern about the safety and health of employees other than the product safety. One of the suggested safety characteristics is by using the visual aid so that the workers can easily see and read the procedures when they perform their duties, whereas the previous procedures are kept in the manual and difficult to access. The purpose of this paper is to share information about the importance of safety and health features for the workers in the procedures established in addition to provide awareness to all parties involved. (author)

  8. 99Mo production for using in the nuclear medicine in 99mTc generators

    International Nuclear Information System (INIS)

    Kurenkov, N.V.; Chuvilin, D.Yu.

    1999-01-01

    The review of methods and advanced technologies for obtaining 99 Mo in nuclear reactors is presented. The 99 Mo isotope is used for preparing the 99m Tc generators, widely applied in nuclear medicine. The reactor method for obtaining 99 Mo is based on the 98 Mo(n, γ) 99 Mo radiation capture reaction and 235 U fission reaction under the effect of the 235 U (n, f) 99 Mo reaction. The results of studies on obtaining 99 Mo on the charged particles accelerators, mainly, on the proton beam and under the effect of photonuclear reaction is also described. The data on the 99 Mo real consumption and forecast for its application in different regions of the world from 1994 up to 2006 are presented [ru

  9. PNRI Pioneering the Establishment and Operation of the Tc-99m Generator Production Facility for Nuclear Medicine Applications

    International Nuclear Information System (INIS)

    Bulos, Adelina DM.; Borras, Ma. Teresa L.; Ciocson, Gregory R.; Mascariñas, Rommel D.C.; Nuñez, Ivy Angelica A.; Dela Rosa, Alumanda M.

    2015-01-01

    In response to the increasing demand in the nuclear medicine sector in the Philippines, the Philippine Nuclear Research Institute (PNRI) initiated the establishment of a radioisotope production facility. To date, the most commonly used radioisotope in nuclear medicine, Technetium-99m or Tc-99m has been successfully produced in the new laboratory, the PNRI facility has already obtained a license to operate from the Philippine FDA. The new facility is envisioned to meet the country’s requirements for all the major medical radioisotope starting with the local production of Tc-99m and the most commonly used Tc-99m radiopharmaceuticals. At present, all radioisotope supplies in the country are sourced overseas at price that varies accordingly. With the establishment of the PNRI’s laboratories, we now have a GMP-grade Tc-99m generator facility capable of producing 50 Tc-99m generators per batch. Instead of Tc-99m being imported, it will be the parent Mo-99m that will be transferred to PNRI facility from Mo-99 processing facilities overseas, contained in specialized transport containers and via airfreight arrangements so it can be processed locally to make Tc-99m generators. But, to make radiopharmaceuticals, the other non-radioactive components are needed to be sourced from abroad. Thus, it has become imperative to also locally produce these non-radioactive components. All of these components, radioactive and non-radioactive, from the radiopharmaceutical finished products which are utilized in nuclear medicine caters for the diagnosis and detection of critical and non-critical human illnesses. The completion of this program is foreseen as another concrete validation on the capacity of the Philippine as a country that is at par with advanced nations on competency and expertise in the research and development of nuclear medicine application for better healthcare delivery and management. (author)

  10. Procedures for the production of poly-zirconium-compound (PZC) based chromatographic 99mTc generator to be available for clinical application

    International Nuclear Information System (INIS)

    Le Van So

    2006-01-01

    Two procedures - Column post-loading and Column pre-loading procedures - for the preparation of PZC based chromatographic Tc-99m generators were described in detail. In-process documentation, flow-chart of process for the individual procedures, specific Tc-99m generator designs and pictorially illustrative description of Tc-99m generator production process were systematically reported. The column pre-loading procedure was highly evaluated as a competent technology for the preparation of PZC based Tc-99m chromatographic generator of high performance using (n, γ) 99 Mo of low specific radioactivity produced on low power research reactors. (author)

  11. Current status of production and supply of molybdenum-99 and 99Mo/99mTc generators in Indonesia

    International Nuclear Information System (INIS)

    Mutalib, A.

    2003-01-01

    Production of high-specific activity molybdenum-99 and 99 Mo/ 99m Tc Generators in Indonesia commenced when a new production facility supported by the presence of a 30 MW multipurpose reactor (RSG-GAS) was established in Serpong in 1990. This report describes the current production and supply of molybdenum-99m devoted mainly to fulfill the domestic demands in supplying 99 Mo/ 99m Tc Generators. Recent development on the use of LEU (Low Enriched Uranium) targets for replacing current HEU (High Enriched Uranium) targets in the production of 99 Mo will be reviewed briefly. (author)

  12. Study of the elution {sup 99}Mo-{sup 99m}Tc generators produced at IPEN-CNEN/SP

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Paula Regina Corain [Pontificia Univ. Catolica de Sao Paulo, SP (Brazil); Instituto de Pesquisas Energeticas e Nucleares IPEN/CNEN-SP, Sao Paulo, SP (Brazil)]. E-mail: corain.lopes@uol.com.br; Osso Junior, Joao Alberto [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: jaosso@ipen.br

    2007-07-01

    Over the last years {sup 99m}Tc has become a very important asset in modern nuclear medicine, due to the emission of gamma ray of optimal energy (140 keV) and a suitable half-life (6.04 h). A further attribute of {sup 99m}Tc is its formation from the decay of {sup 99}Mo and the availability from {sup 99}Mo-{sup 99m}Tc generator systems. The most common and practical generator types consist of a chromatographic column packed with aluminium oxide, onto which the highly purified fission product {sup 99}Mo (imported from Canada) is adsorbed in the form of molybdate. {sup 99m}Tc is further eluted with saline solution. The objective of this work is to study the performance and the elution profile of {sup 99m}Tc from high activity generators in order to decrease molybdenum and aluminium concentration. The experiments involved the use of paper filters and Sep Pak columns and also the changing in the time interval between elutions. {sup 99}Mo breakthrough was measured using a dose calibrator and aluminium by UV-Vis spectrophotometry. The best results were achieved using a Sep Pak column containing neutral aluminium oxide. (author)

  13. Study of the elution 99Mo-99mTc generators produced at IPEN-CNEN/SP

    International Nuclear Information System (INIS)

    Lopes, Paula Regina Corain; Osso Junior, Joao Alberto

    2007-01-01

    Over the last years 99m Tc has become a very important asset in modern nuclear medicine, due to the emission of gamma ray of optimal energy (140 keV) and a suitable half-life (6.04 h). A further attribute of 99m Tc is its formation from the decay of 99 Mo and the availability from 99 Mo- 99m Tc generator systems. The most common and practical generator types consist of a chromatographic column packed with aluminium oxide, onto which the highly purified fission product 99 Mo (imported from Canada) is adsorbed in the form of molybdate. 99m Tc is further eluted with saline solution. The objective of this work is to study the performance and the elution profile of 99m Tc from high activity generators in order to decrease molybdenum and aluminium concentration. The experiments involved the use of paper filters and Sep Pak columns and also the changing in the time interval between elutions. 99 Mo breakthrough was measured using a dose calibrator and aluminium by UV-Vis spectrophotometry. The best results were achieved using a Sep Pak column containing neutral aluminium oxide. (author)

  14. A modified {sup 99} Mo- {sup 99} Tc generator on Zirconium molybdo- phosphate-{sup 99} Mo gel. Vol. 3

    Energy Technology Data Exchange (ETDEWEB)

    El-Kolaly, M T; Talaat, H [Labelled Compounds Department, Cairo (Egypt); Botros, N [Radioistspe and Generator Department, Radioisotope Production and Sealed Source Division, Hot Laboratories Center, Atomic Energy Authority, Cairo (Egypt)

    1996-03-01

    A modified {sup 99} Mo - {sup 99} Tc gel generator is described. The new generator is based on the use of zirconium molybdophosphate - {sup 99} Mo gel in which {sup 99} Mo chemically combined in the gel structure, where {sup 99m}Tc can be easily eluted with distilled water or saline. The gel was prepared via chemical reaction between zirconyl chloride and molybdophosphate - {sup 99} Mo solution. The PH of the reaction mixture was adjusted with NaOH. Different gels have been prepared by varying the molar ratio of Mo:Zr:p. The PH and time of digeston on complete gel formation was also investigated in order to optimize the condition of gel preparation. Molybdophosphate {sup 32} P solution was used to determine the phosphorous content in the gel and in the {sup 99m}Tc eluate. The temperature and time of drying of the gel and their effect on {sup 99m}Tc elution efficiency were also studied. From the data obtained, the optimum conditions for routine production of {sup 99} Mo - {sup 99m}Tc generator are presented and discussed. 2 figs., 6 tabs.

  15. Synthesis and irradiation of titanium molybdates used as matrices of the 99 Mo/ 99m Tc generators

    International Nuclear Information System (INIS)

    Diaz V, H.; Monroy G, F.

    2005-01-01

    The 99m Tc is the radioisotope but used in nuclear medicine. Commercially it takes place starting from generators of 99 Mo/ 99m Tc, composed by a chromatography column padded of aluminium oxide of aluminum, where it is deposited the 99 Mo, product of the fission of the 235 U adsorbed and eluted, by means of a saline solution, in form of 99m TcO 4 - . The production of 99 Mo as a result of the fission, imposes radiochemical separations that generate significant quantities of radioactive waste of medium activity, and inflict elaborated radiochemical manipulation. Due to this, its have been carried out intense investigations to substitute the 99 Mo fission product, by chemical compounds that produce 99 Mo via the reaction 98 Mo(n, γ) 99 Mo. Presently work intends the use of gels of titanium molybdates like matrices of these generators. Titanium molybdates were synthesized starting from solutions TiCl 3 and ammonium molybdates and it was studied the effect of the final pH of the gels, the concentration of the Ti +3 and the influence of the laundry of these on the acting of generators. The best efficiencies and chemical purity, radiochemical and radionuclides of the gels like matrices of generators 99 Mo/ 99m Tc were gotten with the washed gel, elaborated with the solution of TiCI 3 0.35M, and to a final pH of 5.9 (Author)

  16. Preperation and performance of {sup 99}Mo/{sup 99m}Tc chromatographic column generator based on zirconium molybdosilicate

    Energy Technology Data Exchange (ETDEWEB)

    Mostafa, M.; Saber, H.M.; El-Sadek, A.A. [Atomic Energy Authority, Cairo (Egypt). Hot Labs. Center; Nassar, M.Y. [Benha Univ. (Egypt). Chemistry Dept.

    2016-08-01

    Zirconium molybdosilicate (ZrMoSi) gel prepared using {sup 99}Mo radiotracer via peroxo route was used as a base material for {sup 99}Mo/{sup 99m}Tc column generator. The {sup 99m}Tc elution yield and {sup 99}Mo breakthrough in the eluate were studied as a function of the pH-value of gel precipitation, gel drying temperature and Zr: Mo: Si molar ratio. Precipitation pH-value of 2, drying temperature of 100 C and Zr: Mo: Si molar ratio of 0.5: 0.5: 1 were found to be the optimum conditions achieving {sup 99m}Tc elution yield of 82% and {sup 99}Mo breakthrough of 1.0 x 10{sup -3}%. The gel prepared with the optimum conditions was characterized by BET surface area and pore size analyzer, IR spectroscopy, thermal analysis (TGA and DTA), XRD, XRF and FESEM. Technetium-99m eluted from the optimum ZrMoSi {sup 99}Mo/{sup 99m}Tc generator was found to have a high radiochemical purity (98% as {sup 99m}TcO{sub 4}{sup -}) and chemical purity meeting criteria of clinical grade.

  17. A draft business plan for the production of PZC 99Mo-99mTc generator in the Philippines

    International Nuclear Information System (INIS)

    Sombrito, Elvira Z.; Cabalfin, Estelita G.; Calix, Virginia S.; Dela Rosa, Alumanda M.; Borras, Ma. Teresa L.; Bulos, Adelina dM.

    2007-01-01

    Technetium-99m ( 99m Tc) remains as the main workhorse of nuclear medicine in the country. Alone or conjugated with other ligands, it is being used to show the function of major organs and other tissues such as the lung, brain, kidney, liver and bone. It is imported to the country as 99 Mo- 99m Tc generator. These commercial generators use fission molybdenum adsorbed onto alumina column. The FNCA project has shown the feasibility of using a PZC column-reactor 99 Mo generator for commercial applications, citing mainly the cheaper cost of the PZC generator than the imported alumina column-fission 99 Mo generator. PNRI proposes in this draft business plan, the commercial production of PZC generator through the establishment of a facility for the in-house production of 99 Mo- 99m Tc generator. The generator will use PZC coming from Japan as the column material, 99 Mo sourced from neighboring countries and an automatic loading and adsorption machine. Because the PNRI has no local production of the generator, the requirements for successfully venturing into this business activity may differ from the other FNCA members. A careful assessment based on verified data will be needed to refine the business plan. (author)

  18. Silica-gel modified with zirconium oxide as a novel 99Mo adsorbent 99mTc generators

    International Nuclear Information System (INIS)

    Salehi, H.; Mollarazi, E.; Abbasi, H.

    2010-01-01

    A new 99 Mo adsorbent has been prepared with modified silica gel with zirconium oxide (SiO 2 /ZrO 2 :Na 2 MoO 4 ) and used in technetium-99m generator. The adsorption behaviors of 99 Mo in the form of molybdate and 99m Tc in the form of pertechnetate on the new adsorbent was investigated showed that the adsorption capacity of molybdate on this generator was considerably higher than the usual generator with alumina column. Coating zirconium oxide on the surface of silica gel resulted in higher 99 Mo adsorption of this compound. 99m Tc is eluted with 0.9% NaCl, and the radionuclidic, radiochemical and chemical purities of the eluate were checked. This generator has a great potential as compared to the traditional alumina generators.

  19. Technology of the sup(99m)Tc generator, Elumatic III made by Commissariat a l'Energie Atomique, France

    International Nuclear Information System (INIS)

    Le Bris, H.; Pasqualini, R.; Reboul, J.

    1982-01-01

    The article describes the choices leading to the development of an ''integrated'' 99 Mo-sup(99m)Tc generator meeting the following requirements: (a) total activity eluted in a volume of 5 ml; (b) adequate radioprotection both for the user and the manufacturer; (c) injectable eluate. (author)

  20. Preparation of a sup(99m) Tc generator for use in nuclear medicine, using calcinated (10000C) alumina as an adsorber for 99Mo

    International Nuclear Information System (INIS)

    Gasiglia, H.T.; Enoshita, M.

    1980-12-01

    The preparation of 99 sup(m) Tc generator using calcinated (1000 0 C) alumina as adsorber for 99 Mo is described. The adsorption of 99 Mo and the elution of 99 sup(m) Tc were studied. When the generator is autoclaved (30 minutes, 121 0 C), after the loading of 99 Mo, elution yields of 99 sup(m) Tc fall to the half if compared whith generators not autoclaved. However, by autoclaving 99 Mo loading solution and alumina column separately and than preparing the generator, 80% elution yields of 99 sup(m) Tc were obtained. The contamination of the generator by microorganism is avoided when the loading of the 99 Mo is carried out in a hot-cell under UV ligth. The radioactive, radiochemical, chemical and microbiological purity criteria were examined for 99 sup(m) Tc solutions. The generator is considered safe for medical purposes. (Author) [pt

  1. Synthesis and characterization of zirconium molybdates of {sup 99} Mo/{sup 99m} Tc generators; Sintesis y caracterizacion de molibdatos de zirconio de generadores {sup 99} Mo/{sup 99m} Tc

    Energy Technology Data Exchange (ETDEWEB)

    Contreras R, A.; Monroy G, F.; Diaz A, L.V. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    The zirconium molybdates are gels which are used as cation exchangers in the production of {sup 99} Mo/{sup 99m} Tc generators. The synthesis method and the characterization of these gels by thermogravimetry, infrared spectroscopy and X-ray diffraction is presented with the purpose of finding which the factors are that influence in the efficiency of the {sup 99m} Tc production. The results show that the quantity of molecular water contained in gel, is possibly the cause of variations of the efficiencies of the {sup 99} Mo/{sup 99m} Tc generator. (Author)

  2. Infinitivo simple y compuesto con predicados declarativos

    OpenAIRE

    Rodríguez Espiñeira, María José

    2012-01-01

    Este trabajo se centra en las diferencias semánticas y sintácticas que presentan las construcciones de infinitivo simple y compuesto que actúan como objeto directo de predicados declarativos. El tema despierta interés por varios motivos: (1) Se trata de un subconjunto de verbos que subordinan infinitivos simples de un elenco restringido, pero que admiten regularmente infinitivos compuestos.

  3. compuestos fenólicos

    Directory of Open Access Journals (Sweden)

    Yolanda González García

    2005-01-01

    Full Text Available En este trabajo se presenta una revisión bibliográfica que tiene como objetivo identificar y analizar alternativas de aprovechamiento del bagazo de Agave tequilana Weber var. Azul. Se proponen dos líneas de investigación para obtener productos de valor agregado a partir de este residuo: 1utilización como fuente de carbono de bajo costo para la producción de biopolímeros y carbohidrasas, con bacterias celulolíticas del género Microbulbifer, Marinobacterium y Sagittula; 2obtención de compuestos fenólicos a partir de la lignina presente en sus fibras. Se concluye, que el bagazo de agave tequilero es un material viable para ser usado como substrato en procesos fermentativos, por lo que existen grandes oportunidades de investigación para desarrollar procesos de bioconversión técnicamente factible, eficiente y económicamente atractivo

  4. Development of 99Mo/99mTc Generator System for Production of Medical Radionuclide 99mTc using a Neutron-activated 99Mo and Zirconium Based Material (ZBM as its Adsorbent

    Directory of Open Access Journals (Sweden)

    I. Saptiama

    2016-12-01

    Full Text Available Molybdenum produced from fission of U-235 is the most desirable precursor for 99Mo/99mTc generator system as it is non-carrier added and has high specific activity. However, in the last decade there has been short supply of 99Mo due to several constrains. Therefore, there have been many works performed for development of 99Mo/99mTc generator system using 99Mo which is not produced from either LEU or HEU. This report deals with development of 99Mo/99mTc generator system where zirconium-based material (ZBM is used as adsorbent of neutron-activated 99Mo. The system was prepared by firstly irradiating natural Mo in the G. A. Siwabessy reactor to produce neutron-activated 99Mo. The target was dissolved in NaOH 4N and then neutralized with 12 M HCl. The 99Mo solution was then mixed with a certain amount of ZBM followed by heating at 90°C for three hours to allow the 99Mo adsorbed on ZBM. The 99Mo-ZBM (9.36 GBq of 99Mo was Mo/ 4.2 g ZBM was packed on a fritz-glass column. This column was then fitted serially with an alumina column for trapping 99Mo breakthrough. The columns were then eluted daily with saline solution for up to one week. The yield of 99mTc was found to be between 53.7 – 74% (n= 5. All 99mTc eluates were clear solutions with pH of 5. Breakthrough of 99Mo in 99mTc eluates was found to be 0.031 ± 0.019 μCi 99Mo/ mCi 99mTc (n= 5 which was less than the maximum activity of 99Mo allowed in 99mTc solution ( 99%. Radiolabeling of this 99mTc towards methylene diphosphonate (MDP kit gave a radiolabelling efficiency of 99%. In summary, a new 99Mo/99mTc generator system that used neutron-activated 99Mo and ZBM as its adsorbent has been successfully prepared. The 99mTc produced from this new 99Mo/99mTc generator system attained the quality of 99mTc required for medical purposes.

  5. Evaluation of 99Mo/99mTc generator experiment using PZC material and irradiated natural molybdenum

    International Nuclear Information System (INIS)

    Khongpetch, P.; Chingjit, S.; Dangprasert, M.; Rangsawai, W.; Virawat, N.

    2006-01-01

    Technetium-99m ( 99m Tc) is the most widely used radioisotope in nuclear medicine, accounting for more than 80% of all diagnostic nuclear medicine procedure. 99m Tc is almost exclusively produced from the decay of its parent molybdenum-99 ( 99 Mo). The present sources of 99 Mo are research reactors by using the (n, γ) nuclear reaction with natural molybdenum, resulting in inexpensive but low specific activity 99 Mo, or by neutron-induced fission of uranium-235, which result in expensive but high specific activity 99 Mo. The technology requirement for processing of 99 Mo from the (n, γ) 'activation method' is rather simple, and is within the reach of most developing countries operating research reactors. In the fission method' the technological and infrastructure requirements are some complex, and possibly can be sustained only by countries with advanced nuclear technology. To overcome these difficulties, Japan Atomic Energy Research Institute (JAERI) and KAKEN company have developed alternative technology for 99 Mo/ 99m Tc generator by using a molybdenum absorbent called Poly Zirconium compound (PZC) and irradiated natural molybdenum. The paper describes experiments for evaluation the performance of PZC as a column packing material for 99 Mo/ 99m Tc generator from (n, γ) 99 Mo. (author)

  6. Questionnaire survey of SPECT studies after the supply shortage of Tc-99m and model analysis concerning earnings and expenditure of generator use

    International Nuclear Information System (INIS)

    Kinoshita, Ryo; Kosuda, Shigeru; Koike, Katsumi; Arai, Takashi

    2012-01-01

    A questionnaire survey was conducted to evaluate decrease in SPECT studies and its causes after the cessation of long supply shortage of 99 Mo/ 99 mTc generators. Of the replies by the chief nuclear medicine technologists, no necessity for 99 Mo/ 99 mTc generator use or for domestic supply of 99 mTc unexpectedly accounted for 25% and 46%, respectively. Generator use leads to an additional profit by 8654 yen per patient, compared to purchase of commercially available 99 mTc-labeled kits. It is essential to install a 99 Mo/ 99 mTc generator to perform emergency SPECT studies, increase a profit in hospital management, reduction of financial issues in patients, and pediatric studies. This adverse circumstance, however, may provide a good opportunity to instruct nuclear medicine specialists to be aware of the importance mentioned above in medical meetings. (author)

  7. Studies on sup(99m)Tc-pertechnetate from the MEK solvent extraction generator

    International Nuclear Information System (INIS)

    Mohammad, R.; Moore, D.E.; Maddalena, D.J.; Boyd, R.E.

    1984-12-01

    Analysis by gas chromatography-mass spectrometry and high performance liquid chromatography has revealed organic residues in sup(99m)Tc-pertechnetate obtained from 99 Mo-molybdate by extraction, using the organic solvent methylethylketone (MEK). The organic residues have been identified as either (i) low molecular weight carbonyl compounds such as formaldehyde, acetaldehyde and acetone, presumably caused by the effects of γ-radiation on MEK, or (ii) condensation products resulting from the action of strong alkali on MEK during the extraction process. The quantities of organic residues varied from batch to batch of extracted pertechnetate; up to 40 μ mL -1 was found. When these compounds were tested, in rats, by addition to a pyrophosphate bone-seeking radiopharmaceutical, the tissue distribution was not significantly different from that in the control, which contained no added compound. Assay for 99 Tc in MEK-derived pertechnetate indicated up to 10 μg mL -1 of 99 Tc carrier. An assessment of the biological effect of 99 Tc carrier was obtained by (i) red blood cell labelling, where 6 ng mL -1 of 99 Tc was sufficient to reduce labelling efficiency; and (ii) pyrophosphate tissue distribution, where a significant effect was obtained in the presence of 10 μ mL -1 of 99 Tc carrier

  8. Development of the Mo loading apparatus for adsorbing high level 99Mo to PZC and packing in 99mTc generator column

    International Nuclear Information System (INIS)

    Hishinuma, Yukio; Ohmori, Hiroyuki; Noguchi, Tuneyuki; Tatenuma, Katsuyoshi; Genka, Tsuguo; Machi, Sueo

    2006-01-01

    For developing the automatic system to produce the PZC- 99m Tc generator column based on (n, gamma) method, we developed and fabricated the proto-type apparatus for semi hot test to prepare and pack PZC adsorbed 99 Mo produced by (n, gamma) method into the generator column; PZC is Mo adsorbent with practical performance for (n, gamma) 99m Tc generator with high 99 Mo adsorption and high 99m Tc elution. For conducting the constant supply and delivery of 99m Tc generator, it is necessary to establish the technology of (n, gamma) method 99m Tc generator using PZC and to develop the fabrication system for 99 Mo loading to PZC and packing the 99m Tc generator column. By the reason, we are developing the Mo loading apparatus. In order to automatically conduct the process of 99 Mo adsorption to PZC and PZC- 99 Mo packing into the generator column, based on one channel system developed by JAERI-KAKEN at 3 years ago, an advanced automatic loading system functioned with 8 channels was developed as FNCA project proceeded by the core with Kaken Co. and JAIF for realizing a mass production of 99m Tc generators, and moreover the Japanese patent regarding the PZC- 99m Tc generator including the automatic loading system of 99 Mo to PZC and making 99m Tc generator columns has already been applied with joint applicants of BATAN and Kaken Co. Regarding the multi-type Mo loading apparatus mentioned above, we set it up in a hot of BATAN at December 2003 year. In this report, we will introduce mainly about the multi-channel automatic loading system of 99 Mo. (author)

  9. The utilization and performance of poly zirconium chloride (PZC) as chromatographic column for 99mTc generator

    International Nuclear Information System (INIS)

    Wan Anuar Wan Awang; Zulkifli Mohd Hashim; Saaban Kassim

    2004-01-01

    We report on the performance test of column 99m Tc generator utilizing poly zirconium chloride as an adsorbent. Natural molybdenum trioxide was irradiated for 2 hrs at a neutron flux of about 1.5 x 10 12 n/cm 2 /s. A total fourteen generators have been prepared from the experiments. Yield of 99m Tc has been 60-93% and measured 99 Mo content in eluates is 0.20-0.44 %. The adsorption efficiency of 99 Mo on PZC column is between 85 - 92 %. The flow rates from the elution are relatively very poor and take about 5 minutes to finish the elution of 1 ml saline. (author)

  10. Regeneration of 98Mo enriched from waste 99mTc generators

    International Nuclear Information System (INIS)

    Khujaev, S.; Mirzaeva, N.A.; Ashrapov, U.T.; Berdieva, M.; Nushtaeva, L.B.

    2002-01-01

    Radioisotope generator of technetium-99m have found widespread application in nuclear medicine for production of sodium pertechnetate solution ( 99m Tc). In technology of radioisotope generator making, which developed in Institute of Nuclear Physics of Uzbekistan Academy of Science the parent radioisotopes of molybdenum-90 are produced with neutron capture reaction of the enriched isotope of molybdenum-98 in nuclear reactor of WWR-SM. The specific activity of 99 Mo is reached to 5.0 Ci/g after activation process of original material ( 98 Mo). The basic mass of the original materials ( 98 Mo) which took for the irradiation is remained inactive. The high cost of enriched 97 Mo to make up necessity of development of method of 98 Mo regeneration with end in view of its recurring in manufacture. In general, the chromatographic type generator are produced in manufacture with aluminium oxide as sorbent for the parent radionuclides. So we studied the description conditions of molybdenum from aluminium oxide phase, its purification from possible accompanying admixtures and production of molybdenum in goods state. The systems: sulphur acid, ammonium and ammonium with hydrogen peroxide have been considered for molybdenum desorption from aluminium oxide phase. The sulphur oxid solution is most optimal medium for molybdenum desorption with concentration 0.5 M and elution rate for this makes up 2.0-2.05 ml/min. The 98 Mo yield makes up not over 87 %. The subsequent purification of the desorption of molybdenum-98 from the possible admixture are realized by using column with tetra-phosphonium alkali. At first , 98 Mo sorption is realized by anion exchange resin, after that sorbate is washing and dispiriting by solution with composition: 1.0 M NH 4 NO 3 +8.0 % NH 4 OH+10 -2 % H 2 O 2 . The 98 Mo yield makes up under 80 %. Further from obtained solution is realized by precipitation of molybdenum-98 in acid medium and separation of sediments from liquid phase, drying if sediments and

  11. Developmental toward achieving the routine production of poly-zirconium chloride (PZC) 99mTC generator for domestic use

    International Nuclear Information System (INIS)

    Zulkifli Mohamed Hashim; Wan Anuar Wan Awang

    2007-01-01

    Radioisotope 99m Tc still dominates about 80% applications of nuclear technology in nuclear medicine field, and mainly used when labeled with pharmaceutical ligands to diagnose various types of cancerous diseases. This radioisotope now a day is obtained routinely from a radionuclide alumina types chromatographic column generator using a parent molybdenum-99 ( 99 Mo) radionuclide produced by (n,γ) or (n, fission) nuclear reaction. But recently, newly developed polymer of poly-zirconium chloride (PZC) has been proposed to be used as an alternative adsorbent column for the production of technetium generator. A PZC chromatographic column 99m Tc generator uses 99 Mo radioisotope obtained from 98 Mo(n,γ) 99 Mo method instead of 235 U(n,fission) 99 Mo method. The feasibility and practical studies of such generator has been extensively performed by the collaboration research between Japan Atomic Energy Research Institute (JAERI), KAKEN Co., and Forum for Nuclear Cooperation in Asia (FNCA) member state countries. The production procedure has been established and the conception design of the generator has been proposed at the previous series of FNCA workshop, and furthermore, a series of clinical test has been performed in a participating country. Prior to commercialization, a test run for routine production should be started immediately in a least one or two selected FNCA member countries. At a later stage, the PZC technetium generator is produced in a Good Manufacturing Practice (GMP) production laboratory for the purpose of data compilation and registration with the local drug control authority. In this paper, we propose to cooperate with participating organizations to perform the trial production of the generator by utilizing our present radioisotope production facilities and set-up. If this step is successful, then commercialize and marketing of PZC- 99m Tc-generator for domestic use looks more promising. (author)

  12. Study of gels of molybdenum with cerium in the preparation of generators of 99Mo - 99mTc

    Directory of Open Access Journals (Sweden)

    Vanessa Moraes

    2005-10-01

    Full Text Available 99mTc has ideal nuclear properties for organ imaging in nuclear medicine, and it is obtained from the 99Mo-99mTc generator. Four different types of generators are available: chromatographic that uses 99Mo from fission of uranium; MEK solvent extraction; Tc2O7 sublimation; gel chromatographic. This work presents the preparation of gel generators of molybdenum with cerium and characterization of the gels: mass ratio between molybdenum and cerium, structure, size of particles and elution percentage of 99mTc after irradiating the gels. Eight gels were prepared at the same temperature of 50 ºC with concentrations of NaOH of 2 and 4 mol/L, mass ratio of 0.31 and 0.38 and final pH of 3.5 and 4.5. The analysis of the results proved that these gels are not adequate for preparation of the generators of 99Mo-99mTc, since the elution percentages are low, when compared with the gel of molybdenum with zirconium.O 99mTc é o radiofármaco mais utilizado em Medicina Nuclear. Ele é obtido do gerador de 99Mo-99mTc e existem quatro tipos diferentes de geradores: cromatográfico que utiliza 99Mo de fissão; extração por solvente com MKT; sublimação do heptaóxido de tecnécio; cromatográfico tipo gel. Este trabalho apresenta a preparação de geradores tipo gel de molibdênio com cério, a caracterização desses géis com relação à quantidade de molibdênio e de cério, sua estrutura, tamanho das partículas e porcentagem de eluição do 99mTc após o gel ser irradiado. Foram preparados oito géis na temperatura de 50ºC com concentração de NaOH de 2 e 4 mol/L, relação de massa de 0,31 e 0,38 e pH final de 3,5 e 4,5. A análise dos resultados comprovou que esses géis não são adequados para preparação dos geradores de 99Mo-99mTc, já que as porcentagens de eluição são baixas, quando comparadas com o gel de molibdênio com zircônio.

  13. 99mTc-O2S4: a new generation hepatobiliary imaging agent

    International Nuclear Information System (INIS)

    Babbar, A.K.; Mathur, R.; Katiyar, N.; Dutta, M.; Flora; Mishra, A.K.; Yadav, A.

    2010-01-01

    Full text: Hepatobiliary imaging radionuclide - 99m Tc-Mebrofenin is indicated as a hepatobiliary imaging agent for the evaluation of hepatobiliary tract patency to differentiate jaundice resulting from hepatocellular causes from jaundice resulting from partial or complete biliary obstruction; to differentiate extrahepatic biliary atresia from neonatal hepatitis; to detect cystic duct obstruction associated with acute cholecystitis; and to detect bile leaks. Also, 99m Tc-Mebrofenin may be useful to detect intrahepatic cholestasis and to distinguish it from other hepatobiliary diseases, which involve hepatocyte damage. However, the Mebrofenin kit has to be obtained at an exorbitant cost and there was need to develop an indigenous kit that was readily available and could give similar results. For the first time in India, a derivative of DMSA developed by DRDE, Gwalior and modified at INMAS, Delhi to adopt early transition metals, was successfully labelled with 99m Tc (LE>99%). The reaction conditions were optimized after studying the effects of amount of SnCl 2 , pH of the reaction and effect of incubation time. The labelled product 99m Tc-O 2 S 4 , was characterized by ITLC-SG using acetone and saline. The complex was found to be fairly stable at room temperature and showed>95% plasma protein binding. The biodistribution studies showed that after intravenous administration, there was immediate accumulation of radioactivity in liver, the activity kept on increasing in gall bladder with time and thereafter the radioactivity moved to common bile duct (CBD) and small intestines. No significant radioactivity was found in kidneys and blood. Clear visualization of the gallbladder and intestines, within 15 to 45 minutes of administration of 99m Tc-O 2 S 4 in normal rabbit, demonstrates hepatobiliary tract patency of the newly developed radiotracer. The dynamic and static images showed that the newly developed radiopharmaceutical 99m Tc-O 2 S 4 has full potential in studying

  14. Cuadro de bicicleta en material compuesto

    OpenAIRE

    Solana Rodríguez, Alberto

    2014-01-01

    Este proyecto trata sobre el diseño y el cálculo de un cuadro de bicicleta de carretera realizado en materiales compuestos. Esta en particular va a ser fibra de carbono ya que es la más utilizada en el mundo de la competición actualmente, y cada vez más en el resto de bicicletas. El principal objetivo es realizar una inmersión en el campo de los materiales compuestos, cuyas propiedades son bastante diferentes si se comparan con otros que han sido utilizados en diversas asign...

  15. Studies of post-elution concentration of 99m-Tc eluted from a gel type chromatographic generator

    International Nuclear Information System (INIS)

    Suzuki, Katia N.; Osso Junior, Joao Alberto

    2007-01-01

    The radiopharmaceuticals most used in Diagnostic Nuclear Medicine are those labeled with the metastable technetium ( 99m Tc) due to its ideal physical properties of decay (t 1/2 6.01 h, Eγ 140 keV), low cost and availability facilitated through the commercial generator 99 Mo / 99m Tc. This radionuclide is formed by the β - decay of 99 Mo adsorbed on an alumina column of the generator and collected in the form of sodium pertechnetate (Na 99m TcO 4 ) by elution with saline solution (0.9%). The Radiopharmacy Center (CR) of the IPEN-CNEN/SP developed a gel type chromatographic generator of MoZr with 99 Mo produced by 98 Mo(n, γ) 99 Mo reaction that occurs in IEA-R1 Nuclear Reactor. The gel is composed of zirconium molybdate with elution volume of 12 ml with an activity of 11100 MBq (300 mCi) producing a radioactive concentration of 925 MBq (34 mCi) / ml. The fission generator gives a higher radioactive concentration around 1850 MBq (69 mCi) / ml. The aim of this work is to study a system of post-elution concentration using ion exchange cartridges in tandem (cation - anion) for the attainment of a high enough radioactive concentration to meet the demand of market, with a proved quality. This system of concentration will be made based in the technique of solid phase extraction (SPE) using commercial cartridges of extraction, which contains the solid phase and eluent saline solution (0.9%). As the eluent results of this system used in the gel generator of MoZr will be compared with the fission generator currently produced by IPEN-CNEN/SP. (author)

  16. Studies of post-elution concentration of {sup 99m}-Tc eluted from a gel type chromatographic generator

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Katia N.; Osso Junior, Joao Alberto [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: norisuzuki6@yahoo.com.br; jaosso@ipen.br

    2007-07-01

    The radiopharmaceuticals most used in Diagnostic Nuclear Medicine are those labeled with the metastable technetium ({sup 99m}Tc) due to its ideal physical properties of decay (t{sub 1/2} 6.01 h, E{gamma} 140 keV), low cost and availability facilitated through the commercial generator {sup 99}Mo /{sup 99m}Tc. This radionuclide is formed by the {beta}{sup -} decay of {sup 99}Mo adsorbed on an alumina column of the generator and collected in the form of sodium pertechnetate (Na{sup 99m}TcO{sub 4}) by elution with saline solution (0.9%). The Radiopharmacy Center (CR) of the IPEN-CNEN/SP developed a gel type chromatographic generator of MoZr with {sup 99}Mo produced by {sup 98}Mo(n, {gamma}){sup 99}Mo reaction that occurs in IEA-R1 Nuclear Reactor. The gel is composed of zirconium molybdate with elution volume of 12 ml with an activity of 11100 MBq (300 mCi) producing a radioactive concentration of 925 MBq (34 mCi) / ml. The fission generator gives a higher radioactive concentration around 1850 MBq (69 mCi) / ml. The aim of this work is to study a system of post-elution concentration using ion exchange cartridges in tandem (cation - anion) for the attainment of a high enough radioactive concentration to meet the demand of market, with a proved quality. This system of concentration will be made based in the technique of solid phase extraction (SPE) using commercial cartridges of extraction, which contains the solid phase and eluent saline solution (0.9%). As the eluent results of this system used in the gel generator of MoZr will be compared with the fission generator currently produced by IPEN-CNEN/SP. (author)

  17. Evaluation of highly loaded low specific activity 99Mo on alumina column as 99mTc generator

    International Nuclear Information System (INIS)

    Asif, M.; Mushtaq, A.

    2010-01-01

    Adsorption behavior of molybdate on acidic alumina was studied at boiling water bath temperature (∼100 deg C). Various parameters affecting the adsorption of molybdenum, such as pH, amount of molybdenum, incubation period, etc., were determined. A 99m Tc generator was prepared by adsorbing low specific activity 99 Mo (150 mg) on 1 g alumina. Elutions were carried out with saline. Performance of the generator such as 99 Mo breakthrough, aluminum contents, pH, elution profile, radiochemical purity, and labeling efficiency of kits were checked. (author)

  18. Design and implementation of a control automatic module for the volume extraction of a 99mTc generator

    International Nuclear Information System (INIS)

    Lopez, Yon; Urquizo, Rafael; Gago, Javier; Mendoza, Pablo

    2014-01-01

    A module for the automatic extraction of volume from 0.05 mL to 1 mL has been developed using a 3D printer, using as base material acrylonitrile butadiene styrene (ABS). The design allows automation of the input and ejection eluate 99m Tc in the generator prototype 99 Mo/ 99m Tc processes; use in other systems is feasible due to its high degree of versatility, depending on the selection of the main components: precision syringe and multi-way solenoid valve. An accuracy equivalent to commercial equipment has been obtained, but at lower cost. This article describes the mechanical design, design calculations of the movement mechanism, electronics and automatic syringe dispenser control. (authors).

  19. Models of high-Tc superconductivity and applications to electric generators and motors

    DEFF Research Database (Denmark)

    Sørensen, Mads Peter

    We present the Ginzburg Landau model for mesoscopic high-Tc superconductors of complex geometry. It is shown that giant vortices can form at boundary defects. The relation between total magnetic flux penetration through the superconductor and the externally applied field is established. This is i...

  20. Quality control and assurance of Tc-99m generators and kits applied in SAEC laboratories

    International Nuclear Information System (INIS)

    Yassine, T.

    1998-01-01

    A brief description of quality assurance and quality control system applied in SAEC laboratories for production of 99m Tc-radiopharmaceuticals, is provided. The system includes documentation, procedures, releasing of the products and responsibilities. The system described here undergoes a continues development. (author)

  1. Preparation and biological profile of 99mTc-lidocaine as a cardioselective imaging agent using 99mTc eluted from 99Mo/99mTc generator based on Al-Mo gel

    International Nuclear Information System (INIS)

    Sakr, T.M.; October University of Modern Sciences and Arts; Ibrahim, A.B.; Rashed, H.M.; Fasih, T.W.

    2017-01-01

    The current study is aimed to prepare 99m Tc-lidocaine as a new myocardial perfusion-imaging agent. The used 99m Tc was obtained from Al- 99 Mo-molybdate(VI) gel matrix. 99m Tc-lidocaine showed higher (15.4 ± 0.11% ID/g) and faster (15 min post injection) cardiac uptake than the recently studied 99m Tc-valsartan and 99m Tc-procainamide. Consequently, 99m Tc-lidocaine will be a valuable myocardial SPECT agent for diagnosis of emergency patients. Besides, the receptor affinity study confirmed the selectivity of 99m Tc-lidocaine for sodium channels in the heart. (author)

  2. Evaluation of {sup 99}Mo/{sup 99m}Tc generator columns after irradiation with different absorbed doses

    Energy Technology Data Exchange (ETDEWEB)

    Fukumori, Neuza T.O.; Mengatti, Jair; Matsuda, Margareth M.N., E-mail: ntfukumo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNE-SP), Sao Paulo, SP (Brazil)

    2017-07-01

    The {sup 99}Mo/{sup 99m}Tc generator is widely used in nuclear medicine and it consists of a glass column containing Teflon® strips and alumina in which {sup 99}Mo produced by {sup 235}U fission is adsorbed. The {sup 99}mTcO4- eluate shall meet the sterile and pyrogen free conditions for injectable radiopharmaceuticals as determined by the Good Manufacturing Practices. The purpose of this study was to evaluate the feasibility of using gamma radiation in the sterilization of the {sup 99}Mo/{sup 99m}Tc generator column and the influence on the elution efficiency. Alumina-containing columns were irradiated with 10, 15, 25 and 50 kGy absorbed doses. Alumina samples and control (non-irradiated) were submitted to X-ray diffraction and the combined use of scanning electron microscopy and elemental analysis. Teflon® samples were evaluated by thermogravimetry (TGA) and differential scanning calorimetry (DSC). X-ray diffractograms and micrographies with elemental analysis showed no significant changes in the crystalline structure of the alumina because it was stable α-Al{sub 2}O{sub 3}. TGA demonstrated that higher doses showed changes in lower temperatures and times than the control material. For DSC the higher the absorbed dose, the greater the polymer chain breakage and crosslinking in the material. The generator system without radioactivity was set up with the irradiated columns and the eluates demonstrated to be sterile and pyrogen free. The effects of different absorbed doses on the generator column, although some reported changes in the materials, demonstrated that the sterilization of the columns by irradiation with gamma rays as an alternative to wet heat sterilization is feasible from a technical and financial point of view. (author)

  3. Performance study of molybdenum gels with titanium for preparation of 99Mo-99mTc generators

    International Nuclear Information System (INIS)

    Moraes, Vanessa; Osso Junior, Joao Alberto

    2005-01-01

    99m Tc is the most used radioisotope in Nuclear Medicine, due to nuclear characteristics. It is obtained by the radioactive decay of 99 Mo, generator of radioisotope system. When 99 Mo is produced by the activation in reactor, the most used technique for the preparation of the generators is the gel type generator, which incorporates 99 Mo to the gel that is insoluble, chemically inert to the solutions and with properties of ion exchange. Several countries had already studied this methodology, as is the case of Vietnam, India, China, Australian. This work has the objective of studying the performance and characterization of molybdenum gels with titanium. Four variables in the preparation of the gel were studied: mass ratio between Mo and Ti (1.80 and 2.25), concentration of NaOH (2 and 4 mol/L), final temperature (25 and 50 deg C) and pH (3.5 and 4.5). The prepared gels were analyzed with relation to the size of its particles, identification of its structure, amount of molybdenum, amount of titanium, profile of elution, pH of the elution, determination of the radioisotopes in the eluate and final radiochemical purity. The final result is a formularization of the gel with the best characteristics for posterior preparation of the generator of 99m Tc- 99 Mo. (author)

  4. Our experience with B.A.R.C. sup(99m)Tc generator

    International Nuclear Information System (INIS)

    Padmanabhan, V.; Pandurengan, N.; Lakshmanan, A.V.

    1980-01-01

    sup(99m)Tc has been eluted from its parent 99 Mo by solvent extraction method. It is pointed out that there is considerable variation in the eluted activity in day to day practice and any administration of the isotope to the patient must be measured in an isotope calibrator. Operator dose levels have been recorded which are quite within the permissible levels. (auth.)

  5. Performance of Tc-99m generator prepared with Mo adsorbent PZC and irradiated nature MoO3

    International Nuclear Information System (INIS)

    Liu Yishu

    2006-01-01

    This paper describes the technical process of Tc-99m generator prepared with reactor actived Mo-99 and PZC and the performance of the generator was also reported. Two generators were prepared with different batch of PZC and by different technical process. The results show that the adsorption rate was ∼65% and the adsorption efficiency of 99 Mo can be seriously affected by the adsorption process (the temperature, intensity and frequency of shaking and the PZC volume in solution etc.). The elution efficiency was 43-73%. The Mo breakthrough 1.2 - 16% without safe column and its can be decreased to be very low by connecting a hydrate zirconia (HZO) safe column. (author)

  6. Study of the viability of hydroxyapatite as matrix of the generator {sup 99} Mo/{sup 99m} Tc; Estudio de la viabilidad de la hidroxiapatita como matriz del generador {sup 99} Mo/{sup 99m} Tc

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar D, I.C.; Badillo A, V.E. [UAZ, Unidad Academica de Ciencias Quimicas, 98600 Guadalupe, Zacatecas (Mexico); Monroy G, F. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)]. E-mail: itzelaguilar@hotmail.com

    2004-07-01

    The generator more used in the nuclear medicine it is the generator {sup 99} Mo / {sup 99} Tc. The separation of {sup 99}Mo and {sup 99m}Tc in the commercial generator is carried out on a column that contains alumina (Al{sub 2}0{sub 3}). The adsorbent proposed in this investigation work, the hydroxyapatite, is an insoluble solid considered within of the fixers of anions more important. To evaluate the efficiency of the hydroxyapatite in the separation of the Mo and the Tc they were carried out preliminary tests to know the likeness of the one been accustomed to by the molybdate ions (MoO{sub 4}{sup -2}) and the pertechnetate ions (Tc0{sub 4}{sup -}) in function of the value of the p H, in a solution of CaCI{sub 2} 0.01 M. For the study of the retention of the molybdate ion, it was used the radioisotope Mo-99 fission product, and for the pertechnetate ion it was used the Tc- 99 m radionuclide son of the Mo-99. The obtained results in a solution of CaCl{sub 2} 0.01 M to different values of p H of the solution, show that the fixation of the pertechnetate ions (TcO{sub 4}{sup -}) and the fixation of the molybdate ions (MoO{sub 4}{sup -2}), they present very different behaviors in the hydroxyapatite. The results indicate that the synthetic hydroxyapatite BIO-RAD retains to the molybdate ion to values of lightly acid p H (5-6), being the retention of the pertechnetate practically worthless. (Author)

  7. A new inorganic adsorbent of (n, {gamma}){sup 99}Mo for the practical {sup 99m}Tc generator

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, Y; Nishino, M [Kaken Co., Asahi, Ibaraki (Japan). Functional Materials Inst.; Ishikawa, K; Tatenuma, K; Kurosawa, K; Tanase, M; Yamabayashi, H

    1998-10-01

    Technetium-99m is used most widely in diagnostic nuclear medicine. By the milking procedure, it is normally eluted as the daughter nuclide from {sup 99}Mo adsorbed in an alumina column as a generator. Molybdenum-99 with high specific activity has been produced in large quantities from the fission of irradiated {sup 235}U. However, the production process involves the troublesome handling process of various fission products in the high radiation field and generates highly radioactive and poisonous wastes. To avoid these drawbacks, some gel generators have been proposed. They are of zirconium molybdate, zirconium molybdophosphate or titanium molybdate gel, which are able to be applied to {sup 99}Mo obtained easily by (n, {gamma}) reaction of natural Mo. However, it has become apparent that the gel has been prepared only under certain strict conditions such as concentrations and reaction temperature, and eventually the elution rate of {sup 99m}Tc was unstable because of any influences of the gel preparation conditions. We have developed and reported a new inorganic adsorbent (Polyinorganic Zirconium Compound: PZC) of {sup 99}Mo with a low specific activity obtained by (n, {gamma}) reaction to overcome the problems of gel generators above mentioned. PZC was prepared from ZrCl{sub 4} and isopropyl alcohol. The adsorbed amount of {sup 99}Mo (Mo) to PZC was about 200 mg/g-PZC, and the yield of {sup 99m}Tc was about 80%. And the breakthrough of {sup 99}Mo was less than 0.5%. In this paper, the properties of the improved PZC, performance of generators with {sup 99}Mo loaded from 0.5 to 470 MBq, and a method to reduce the breakthrough of {sup 99}Mo are described. (author)

  8. Nanostructured metal oxides: promise opportunity and challenge to develop clinically useful 99Mo/99mTc generators using (n, gamma)99Mo

    International Nuclear Information System (INIS)

    Dash, Ashutosh

    2014-01-01

    The role of 99m Tc diagnostic nuclear medicine needs hardly to be reiterated. Today, it is the most widely used radionuclide for single photon emission computed tomography (SPECT) imaging procedures. The current strategy of availing 99m Tc is ensured from column chromatographic 99 Mo/ 99m Tc generators using a bed of acidic alumina. While the column chromatographic 99 Mo/ 99m Tc generator constitute a successful exemplar of availing 99m Tc, the limited capacity of alumina (2-20 mg Mo per g of alumina) for taking up molybdate ions necessitates the use of 99 Mo of the highest specific activity available, as can be found in fission produced 99 Mo (F 99 Mo). In order to reduce dependence of F 99 Mo, the scope of using low specific activity (n,γ) 99 Mo along with high capacity adsorbent is an interesting prospect. In this context, the scope of using nanomaterials as a viable adsorbent seemed attractive by virtue of their huge surface to volume ratios, altered physical properties, tailored surface chemistry, favorable adsorption characteristics, and enhanced surface reactivity resulting from the nanoscale dimensions. This emerging class of adsorbent represents an innovative paradigm and is expected to play an important role in the development of 99 Mo/ 99m Tc generators adaptable to the existing and foreseeable demands. This talk outlines a critical assessment on the role of nanostructured metal oxides, recent developments, the contemporary status, and key challenges and apertures to the near future. (author)

  9. 99mTc gel generators based on zirconium molybdate-99Mo: III: Influence of preparatory conditions of zirconium molybdate-99Mo gel on generator performance

    International Nuclear Information System (INIS)

    Saraswathy, P.; Sarkar, S.K.; Arjun, G.; Ramamoorthy, N.; Nandy, S.K.

    2004-01-01

    The effect of subtle variations on zirconium molybdate- 99 Mo gel preparatory conditions, such as stoichiometry of reactants, pH of gel formation, conditioning of gel granules etc., prior to elution were investigated primarily to arrive at the conditions resulting in high 99m Tc release and minimal 99 Mo breakthrough upon elution with normal saline. Zirconium molybdate- 99 Mo gels were prepared by reacting solutions of Zr and Mo in mole ratios of 0.75-1.5. Both water and normal saline were used for gel disintegration, and the release of 99m Tc and 99 Mo from gel columns into eluates was compared. Sharper elution profile of 99m Tc, but with significantly higher 99 Mo breakthrough (5-8 times), was obtained when water alone was used for disintegration and elution, in comparison to when saline was used. Gels exhibiting optimum characteristics were found to be formed at a pH of 4-5 by reacting [Zr]: [Mo] in the mole ratio of 1.25: 1 and after drying, the product was dispersed into granules by disintegration with normal saline. 99m Tc elution efficiency was found to be ∝ 75% and 99 Mo breakthrough ∝ 0.05%. The elution profile was sharp when a 6 g gel column coupled to a 2 g acidic alumina column (to trap 99 Mo) was eluted with 6-9 ml normal saline. Generators containing upto 23 GBq 99 Mo were prepared, eluted extensively without changing the alumina column and found to provide pertechnetate of good quality, commensurate with hospital radiopharmacy requirements. (orig.)

  10. Risks in production and utilisation of labelled compounds for nuclear medicine. 2. Benefits and risks of utilization of 99mTc generator in nuclear medicine

    International Nuclear Information System (INIS)

    Olteanu-Chiper, D.; Barna, C.; Gard, E.; Negoita, N.

    1999-01-01

    The growth of radioisotope applications in nuclear medicine, imposed the reduction of the radiation effects and so, the reduction of associated risk of these applications. The utilization of radioactive isotopes for investigations in nuclear medicine is conditioned by the chemical behaviour and the means of detection of the emitted radiation on one hand, and by the radiation doses received by the patient, on the other hand. In these conditions, the nuclear medicine uses only the radioisotopes which are short half-time and low radiation energy, but high enough to be detected from the exterior of human body, 99m Tc being the most favourable for utilization in diagnostic purpose. This advantage is increased by the multiple possibilities to obtain different chemical forms with 99m Tc included, which permit the production of a large variety of radiopharmaceutical products, having a specific localization in the human body (organ-targets), thus allowing the diagnosis of numerous diseases. In the work the benefits and risks of the 99m Tc-Generator utilization in the nuclear medicine are shown and the utilization technique in these applications is presented . The 99m Tc-Generator is a compact chromatographic system, with lead shielding, which permits the elution of a sterile, pyrogen-free, injectable sodium pertechnetate solution, from an aluminium chromatographic column which keeps the 99 Mo. The 99m Tc-Generator system ensures the operator protection. The radioactive solution with 99m Tc is obtained in a closed vial, within lead shielding, the irradiation or contamination risks being mostly reduced. The utilization of 99m Tc in scintigraphic exam for diagnostic medicine implies a labelling operation with 99m Tc chemically bounded in forms appropriate to the target-organ and than the intravenously injection in doses dependent on the specific scintigraphic investigation or examination. (authors)

  11. Study of methodologies for quality control of 99Mo used in 99Mo/99mTc generators

    International Nuclear Information System (INIS)

    Said, Daphne de Souza

    2016-01-01

    99m Tc is the most used radionuclide in nuclear medicine. In Brazil, the 99 Mo/ 99m Tc generators are exclusively produced by Radiopharmacy Center at IPEN-CNEN/ SP, by importing 99 Mo from different suppliers. 99 Mo (t 1/2 = 66 h) is a fission product of 235 U and it can have radionuclidic impurities that are prejudicial for human health. For safe use of generators, it is necessary to perform the evaluation of 99 Mo by quality control tests in order to assess if 99 Mo complies with the specifications. The European Pharmacopoeia (EP) presents a monograph for evaluation of the quality of the [ 99 Mo] solution as sodium molybdate,that is used as raw material for 99 Mo/ 99m Tc generators production, including specification parameters (identification, radiochemical purity and radionuclidic purity), analysis methods and limits. However, it has been observed difficulties on the execution and implementation of these methods by the generators producers, with a few literature about this subject, probably due to complexity of the proposed methods. In this work, many quality control parameters of 99 Mo described in the EP monograph were evaluated. Separation methods for 99M o from its radionuclidic impurities by solid phase extraction (SPE) and TLC were studied. After SPE separation, the quantification of metals by ICP-OES to evaluate the percentage of retention of Mo and the percentage of recovery of Ru, Te and Sr using different types of cartridges were proposed, replacing radiotracers use. It was observed that the specific type of SPE cartridge recommended by the EP for separation of 99 Mo presented low recoveries for Ru, compared to other available anion exchange SPE cartridges. 99 Mo samples from different worldwide suppliers were analyzed. It was observed that quantification of 103 Ru in 99 Mo samples with decay time higher than 4 weeks is possible. An alternative method for separation of 131 I from 99 Mo showed promising results by TLC. The quantification of beta and

  12. Production optimization of {sup 99}Mo/{sup 99m}Tc zirconium molybate gel generators at semi-automatic device: DISIGEG

    Energy Technology Data Exchange (ETDEWEB)

    Monroy-Guzman, F., E-mail: fabiola.monroy@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera Mexico-Toluca S/N, La Marquesa, Ocoyoacac, 52750, Estado de Mexico (Mexico); Rivero Gutierrez, T., E-mail: tonatiuh.rivero@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera Mexico-Toluca S/N, La Marquesa, Ocoyoacac, 52750, Estado de Mexico (Mexico); Lopez Malpica, I.Z.; Hernandez Cortes, S.; Rojas Nava, P.; Vazquez Maldonado, J.C. [Instituto Nacional de Investigaciones Nucleares, Carretera Mexico-Toluca S/N, La Marquesa, Ocoyoacac, 52750, Estado de Mexico (Mexico); Vazquez, A. [Instituto Mexicano del Petroleo, Eje Central Norte Lazaro Cardenas 152, Col. San Bartolo Atepehuacan, 07730, Mexico D.F. (Mexico)

    2012-01-15

    DISIGEG is a synthesis installation of zirconium {sup 99}Mo-molybdate gels for {sup 99}Mo/{sup 99m}Tc generator production, which has been designed, built and installed at the ININ. The device consists of a synthesis reactor and five systems controlled via keyboard: (1) raw material access, (2) chemical air stirring, (3) gel dried by air and infrared heating, (4) moisture removal and (5) gel extraction. DISIGEG operation is described and dried condition effects of zirconium {sup 99}Mo- molybdate gels on {sup 99}Mo/{sup 99m}Tc generator performance were evaluated as well as some physical-chemical properties of these gels. The results reveal that temperature, time and air flow applied during the drying process directly affects zirconium {sup 99}Mo-molybdate gel generator performance. All gels prepared have a similar chemical structure probably constituted by three-dimensional network, based on zirconium pentagonal bipyramids and molybdenum octahedral. Basic structural variations cause a change in gel porosity and permeability, favouring or inhibiting {sup 99m}TcO{sub 4}{sup -} diffusion into the matrix. The {sup 99m}TcO{sub 4}{sup -} eluates produced by {sup 99}Mo/{sup 99m}Tc zirconium {sup 99}Mo-molybdate gel generators prepared in DISIGEG, air dried at 80 Degree-Sign C for 5 h and using an air flow of 90 mm, satisfied all the Pharmacopoeias regulations: {sup 99m}Tc yield between 70-75%, {sup 99}Mo breakthrough less than 3 Multiplication-Sign 10{sup -3}%, radiochemical purities about 97% sterile and pyrogen-free eluates with a pH of 6. - Highlights: Black-Right-Pointing-Pointer {sup 99}Mo/{sup 99m}Tc generators based on {sup 99}Mo-molybdate gels were synthesized at a semi-automatic device. Black-Right-Pointing-Pointer Generator performances depend on synthesis conditions of the zirconium {sup 99}Mo-molybdate gel. Black-Right-Pointing-Pointer {sup 99m}TcO{sub 4}{sup -} diffusion and yield into generator depends on gel porosity and permeability. Black

  13. Comparative study of 99Mo/99mTc generators at base of synthesized gels starting from 99Mo of activation and of fission

    International Nuclear Information System (INIS)

    Lopez M, I.Z.; Monroy G, F.; Rivero G, T.; Rojas N, P.

    2007-01-01

    At the present time the more used and diffused radionuclide in nuclear medicine it is the Technetium 99 metastable ( 99 mTc) it is used for diagnostic and therapy. It is produced starting from molybdenum 99 ( 99 Mo), which is absorbed in chromatographic columns, loaded with alumina that absorb only 0.2% of 99 Mo situation that forces to use high specific activities of 99 Mo that it is obtained starting from the fission of the 235 U. Given these conditions and limitations, new preparation procedures of 99 Mo/ 99m Tc generators, of low or medium specific activity, its have been developed, using gels of zirconium molybdates that incorporates until 30% in weight of 99 Mo in the gel, and also conserve similar characteristics of quality and purity that those obtained by the traditional generator; reducing by this way the cost of production of the 99m Tc, when using 99 Mo of low specific activity, in the preparation of 99 Mo/ 99m Tc generators. The radiochemical characteristics of the elution of 99m Tc, depends strongly on the gel preparation conditions. In particular, the present work has for object to determine the influence of the used type of 99 Mo, fission or activation product, during the gels synthesis, as well as the used air flow for the agitation in the gels preparation and its influence in the quality of the 99 Mo/ 99m Tc generators. When diminishing the agitation air flow the efficiency it increases and in the radionuclide purity of the eluates and when using 99 Mo of fission for the gels production it increases in an important way the elution efficiency, the radiochemical purity and radionuclide of the eluates of 99m Tc. (Author)

  14. Study of gels of molybdenum with cerium in the preparation of generators of {sup 99}Mo-{sup 99m}Tc

    Energy Technology Data Exchange (ETDEWEB)

    Moraes, Vanessa; Marczewski, Barbara; Dias, Carla Roberta; Osso Junior, Joao Alberto [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), SP (Brazil). Centro de Radiofarmacia

    2005-10-15

    {sup 99m} Tc has ideal nuclear properties for organ imaging in nuclear medicine, and it is obtained from the {sup 99}Mo-{sup 99m} Tc generator. Four different types of generators are available: chromatographic that uses {sup 99}Mo from fission of uranium; MEK solvent extraction; Tc{sub 2}O{sub 7} sublimation; gel chromatographic. This work presents the preparation of gel generators of molybdenum with cerium and characterization of the gels: mass ratio between molybdenum and cerium, structure, size of particles and elution percentage of {sup 99m} Tc after irradiating the gels. Eight gels were prepared at the same temperature of 50 deg C with concentrations of NaOH of 2 and 4 mol/L, mass ratio of 0.31 and 0.38 and final pH of 3.5 and 4.5. The analysis of the results proved that these gels are not adequate for preparation of the generators of {sup 99}Mo-{sup 99m} Tc, since the elution percentages are low, when compared with the gel of molybdenum with zirconium.(author)

  15. Evaluation of fresh and old eluate of 99Mo/99mTc generators used for labeling of different pharmaceutical kits

    International Nuclear Information System (INIS)

    Urbano, N.; Chinol, M.; Modoni, S.; Guerra, M.

    2005-01-01

    Sixty 99 Mo/ 99m Tc wet column generators, loaded with two different 99 Mo activities, were analyzed in order to assess the quality of their eluates. Each elution was used for labeling of different radiopharmaceuticals, in order to evaluate whether 'risky' elutions, namely those performed just after generator delivery and at 72 hours or more from the last elution, could be conveniently employed when fresh available radioactivity is not enough for the planned labeling or when shipping problems arise, or delay in delivery of a new generator occurs. Radiochemical quality control of all radiopharmaceuticals labeled with these elutions was performed. The elutions differed mainly in 99 Tc ground state ( 99g Tc) and amounts of oxidizing impurities. Radiolabeling procedures, however, were not affected, suggesting that these 'risky' elutions might be appropriately used, in 'emergency' conditions, for labeling radiopharmaceuticals although their radiochemical purity control is recommended prior to patient administration. (author)

  16. Indigenous technology development and standardization of the process for obtaining ready to use sterile sodium pertechnetate-Tc-99m solution from Geltech generator

    International Nuclear Information System (INIS)

    Sarkar, Sishir Kumar; Kothalkar, Chetan; Naskar, Prabhakar; Joshi, Sangeeta; Saraswathy, Padmanabhan; Dey, Arun Chandra; Vispute, Gunvant Leeladhar; Murhekar, Vishwas Vinayak; Pilkhwal, Neelam

    2013-01-01

    The indigenous design and technology development for processing large scale zirconium molybdate-Mo-99 (ZrMo-99) Geltech generator was successfully commissioned in Board of Radiation and Isotope Technology (BRIT), India, in 2006. The generator production facility comprises of four shielded plant facilities equipped with tongs and special process gadgets amenable for remote operations for radiochemical processing of ZrMo-99 gel. Over 2800 Geltech generators have been processed and supplied to user hospitals during the period 2006-2013. Geltech generator supplied by BRIT was initially not sterile. Simple elution of 99m Tc is performed by a sterile evacuated vial with sterile and pyrogen free 0.9% NaCl solution to obtain sodium ( 99m Tc) pertechnetate solution. A special type online 0.22 μm membrane filter has been identified and adapted in Geltech generator. The online filtration of 99m Tc from Geltech generator; thus, provided sterile 99m Tc sodium pertechnetate solution. Generators assembled with modified filter assembly were supplied to local hospital in Mumbai (Radiation Medicine Centre (RMC) and S.G.S. Medical College and KEM Hospital) and excellent performances were reported by users. (author)

  17. Indigenous technology development and standardization of the process for obtaining ready to use sterile sodium pertechnetate-Tc-99m solution from Geltech generator.

    Science.gov (United States)

    Sarkar, Sishir Kumar; Kothalkar, Chetan; Naskar, Prabhakar; Joshi, Sangeeta; Saraswathy, Padmanabhan; Dey, Arun Chandra; Vispute, Gunvant Leeladhar; Murhekar, Vishwas Vinayak; Pilkhwal, Neelam

    2013-04-01

    The indigenous design and technology development for processing large scale zirconium molybdate-Mo-99 (ZrMo-99) Geltech generator was successfully commissioned in Board of Radiation and Isotope Technology (BRIT), India, in 2006. The generator production facility comprises of four shielded plant facilities equipped with tongs and special process gadgets amenable for remote operations for radiochemical processing of ZrMo-99 gel. Over 2800 Geltech generators have been processed and supplied to user hospitals during the period 2006-2013. Geltech generator supplied by BRIT was initially not sterile. Simple elution of Tc-99m is performed by a sterile evacuated vial with sterile and pyrogen free 0.9% NaCl solution to obtain sodium (Tc-99m) pertechnetate solution. A special type online 0.22 μm membrane filter has been identified and adapted in Geltech generator. The online filtration of Tc-99m from Geltech generator; thus, provided sterile Tc-99m sodium pertechnetate solution. Generators assembled with modified filter assembly were supplied to local hospital in Mumbai Radiation Medicine Centre (RMC) and S.G.S. Medical College and KEM Hospital) and excellent performances were reported by users.

  18. Synthesis and irradiation of titanium molybdates used as matrices of the {sup 99} Mo/ {sup 99m} Tc generators; Sintesis e irradiacion de molibdatos de titanio utilizados como matrices de los generadores de {sup 99} Mo/ {sup 99m} Tc

    Energy Technology Data Exchange (ETDEWEB)

    Diaz V, H. [Facultad de Quimica, UAEM 50000 Toluca, Estado de Mexico (Mexico); Monroy G, F. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2005-07-01

    The {sup 99m} Tc is the radioisotope but used in nuclear medicine. Commercially it takes place starting from generators of {sup 99} Mo/{sup 99m} Tc, composed by a chromatography column padded of aluminium oxide of aluminum, where it is deposited the {sup 99} Mo, product of the fission of the {sup 235} U adsorbed and eluted, by means of a saline solution, in form of {sup 99m} TcO{sub 4}{sup -}. The production of {sup 99} Mo as a result of the fission, imposes radiochemical separations that generate significant quantities of radioactive waste of medium activity, and inflict elaborated radiochemical manipulation. Due to this, its have been carried out intense investigations to substitute the {sup 99} Mo fission product, by chemical compounds that produce {sup 99} Mo via the reaction {sup 98} Mo(n, {gamma}){sup 99} Mo. Presently work intends the use of gels of titanium molybdates like matrices of these generators. Titanium molybdates were synthesized starting from solutions TiCl{sub 3} and ammonium molybdates and it was studied the effect of the final pH of the gels, the concentration of the Ti{sup +3} and the influence of the laundry of these on the acting of generators. The best efficiencies and chemical purity, radiochemical and radionuclides of the gels like matrices of generators {sup 99} Mo/{sup 99m} Tc were gotten with the washed gel, elaborated with the solution of TiCI{sub 3} 0.35M, and to a final pH of 5.9 (Author)

  19. Design and setup of a portable stirring device for transfer and dissolution of 99Mo applied to the use of a 99mTc generator

    International Nuclear Information System (INIS)

    Lopez, Yon; Rojas, Jorge

    2014-01-01

    This work shows the design and implementation of a portable magnetic stirring device for transfer and efficient dissolution of Mo O 3 coupled to a 99m Tc generator prototype. The development of this equipment will enable an efficient and safe transfer of 99 Mo at a 2 Ci of maximum activity from the nuclear reactor Huarangal to the point of operation of the 99m Tc generator equipment. This article describes the mechanical design, volume and shielding calculation, the electronics design and the programmable speed control of the stirring system for radioactive samples. (authors).

  20. Comparative study of 99Mo/99mTc generators at base of synthesized gels starting from activation and fission 99Mo

    International Nuclear Information System (INIS)

    Lopez M, I.Z.; Monroy G, F.; Rivero G, T.; Rojas N, P.

    2007-01-01

    The 99m Tc is used for diagnostic and therapy. It is produced starting from 99 Mo, absorbed in chromatographic columns, loaded with alumina that absorb only 0.2% of 99 Mo with high specific activities of 99 Mo, obtained from the 235 U fission. Given these conditions and limitations, new preparation procedures of 99 Mo/ 99m Tc generators, its have been developed, using zirconium molybdates gels that incorporates until 30% of 99 Mo, conserve similar characteristics of quality and purity that the traditional generator. The radiochemical characteristics of the 99m Tc elution, depend strongly on the gel preparation conditions. In particular, the present work has by object to determine the influence of the 99 Mo used type, fission or activation product, during the gels synthesis, as well as the used air flow for the agitation in the gels preparation and its influence in the 99 Mo/ 99m Tc generators quality. When diminishing the flow of agitation air the efficiency it increases and in the radionuclide purity of the eluates and when using 99 Mo from fission for the gels production it increases in an important way the elutriation efficiency, the radiochemical and radionuclide purity of the 99m Tc eluates. (Author)

  1. Rechargeable sup(99)MO/sup(99m)TC generator system

    International Nuclear Information System (INIS)

    Thornton, A.K.; Cerone, F.E.

    1980-01-01

    A rechargeable radioisotope generator system is described in which the transfer of the parent isotope, molybdenum 99, can be affected safely and easily. Part of the system consists of a shielded shipping vial for the parent isotope. The generator consists of an alumina column upon which molybdenum 99 may be adsorbed and from which technetium 99m may be eluted. The generator is shipped as a cold package to the user and is charged as needed. A transfer mechanism is incorporated in the shipping shield, which allows the septum of the vial to be pierced and the contents to be transferred to the generator essentially automatically. (LL)

  2. Fractura de compuestos polipropileno-talco

    OpenAIRE

    Velasco Perero, José Ignacio

    1996-01-01

    La investigación realizada en esta tesis se ha centrado en la caracterización de la fractura de materiales compuestos por una matriz de polipropileno homopolímero isotáctico y diferentes fracciones de partículas laminares de talco. Estos materiales se emplean en la actualidad para la fabricación de piezas por inyección, especialmente en el sector de automoción. Por extrusión de doble tornillo se prepararon dos series de materiales conteniendo diferentes fracciones de talco disperso, el cual f...

  3. Noncoding RNA Expression and Targeted Next-Generation Sequencing Distinguish Tubulocystic Renal Cell Carcinoma (TC-RCC) from Other Renal Neoplasms.

    Science.gov (United States)

    Lawrie, Charles H; Armesto, María; Fernandez-Mercado, Marta; Arestín, María; Manterola, Lorea; Goicoechea, Ibai; Larrea, Erika; Caffarel, María M; Araujo, Angela M; Sole, Carla; Sperga, Maris; Alvarado-Cabrero, Isabel; Michal, Michal; Hes, Ondrej; López, José I

    2018-01-01

    Tubulocystic renal cell carcinoma (TC-RCC) is a rare recently described renal neoplasm characterized by gross, microscopic, and immunohistochemical differences from other renal tumor types and was recently classified as a distinct entity. However, this distinction remains controversial particularly because some genetic studies suggest a close relationship with papillary RCC (PRCC). The molecular basis of this disease remains largely unexplored. We therefore performed noncoding (nc) RNA/miRNA expression analysis and targeted next-generation sequencing mutational profiling on 13 TC-RCC cases (11 pure, two mixed TC-RCC/PRCC) and compared with other renal neoplasms. The expression profile of miRNAs and other ncRNAs in TC-RCC was distinct and validated 10 differentially expressed miRNAs by quantitative RT-PCR, including miR-155 and miR-34a, that were significantly down-regulated compared with PRCC cases (n = 22). With the use of targeted next-generation sequencing we identified mutations in 14 different genes, most frequently (>60% of TC-RCC cases) in ABL1 and PDFGRA genes. These mutations were present in  600) of The Cancer Genome Atlas database. In summary, this study is by far the largest molecular study of TC-RCC cases and the first to investigate either ncRNA expression or their genomic profile. These results add molecular evidence that TC-RCC is indeed a distinct entity from PRCC and other renal neoplasms. Copyright © 2018 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

  4. Development of a measurement device, using a Geiger-Mueller type detector, for the determination of the activity in a 99mTc generator prototype

    International Nuclear Information System (INIS)

    Urquizo, Rafael; Gago, Javier; Mendoza, Pablo; Cruz-Saco, Cesar; Rojas, Jorge

    2014-01-01

    This article presents the implementation of a measurement system using a Geiger-Mueller detector (GM) in order to adapt it into a 99m Tc generator prototype. The response signal of the measurement system designed in terms of count rate is linearly proportional to the variation of the activity measured between 280 and 170 mCi of 99m Tc with a relative error of ± 2,8 %. However, further tests are needed to evaluate the correlation for an activity level lower than 20 mCi in order to obtain an adequate range of use. (authors).

  5. Study of different absorbent materials for the preparation of generator systems of 99Mo - 99mTc and 188W-188Re

    International Nuclear Information System (INIS)

    Lopes, Paula Regina Corain; Osso Junior, Joao Alberto

    2009-01-01

    Amongst some currently radioisotopes, 99m Tc and 188 Re present adequate decay properties for use in Nuclear Medicine. In the current times the most diagnosis examinations are performed with 99m Tc and 188 Re is one radioisotope of potential use in therapy techniques. The objective of this work consists of determining the capacity of some adsorbent materials for retention of molybdenum and tungsten, aiming the optimization of generator systems of 99 Mo- 99m Tc and 188 W- 188 Re with suitable characteristics for application in Nuclear Medicine. Known amounts, in mass, of molybdenum and tungsten were percolated through different chromatographic columns containing different commercial adsorbent materials such as: PZC (poly-zirconium compound), acid alumina and calcinated alumina used in the routine preparation of 99 Mo- 99m Tc generators at IPEN. The tungsten ( 188 W), as well the PZC used in this project, supplied by Russia and Japan, respectively, through the International Atomic Energy Agency (IAEA) and used without any previous preparation. Also trace amounts of 99 Mo and 188 W were added to the initial solutions and the generators were assembled. The 99 Mo- 99m Tc generators were then eluted with known volumes of 0.9% NaCl solution every 24 hours whereas the 188 W- 188 Re generators were eluted every 48 hours. The eluted samples were analyzed by Gamma Spectroscopy and later submitted to quality control evaluation. The results showed that the PZC presents superior retention capacity for Mo of 97.50mg Mo/gPZC, higher than in acid and calcinated alumina, however the elution efficiency at lower pHs is not so high. With regards to the experiments carried out with 188 W and alumina, it was verified that the elution efficiency of 188 Re was not reproducible and the retention capacity of W was 90.23mgW/gAl 2 O 3 at pH 7. (author)

  6. Chemical and technological investigations to establish the production of 99Mo/sup(99m)Tc-Generators from uranium fission in Egypt

    International Nuclear Information System (INIS)

    Munze, R.; El-Bayoumy, S.; Mosaad, K.; Hallaba, E.

    1980-01-01

    Different possibilities to meet the current estimated demand of sup(99m)Tc for medical uses in the Arab Republic of Egypt have been investigated using irradiation and separation experiments and theoretical calculations. The investigation includes the evaluation of the real present irradiation capability of the Egyptian Research Reactor as well as pilot runs suitable technological schemes for target design and chemical processing of irradiated uranium targets. The suitability of the produced 99 Mo for the preparation of 99 Mo/sup(99m)Tc-generators has been confirmed. Separation yield (80%) as well as the radiochemical and radionuclidic purity of the sup(99m)Tc (TcO 4 98%, sup(99m)Tc 99,9%) corresponds to comparable results for similar processes cited in recent literature. The necessary requirements, related to the irradiation capability of the reactor and the demands of the radiochemical facilities, have been derived. The present work is the fruit of three months cooperation between the Agency expert and the Egyptian Counterpart

  7. 99mTc generator preparation using (n, γ)99Mo produced using natural molybdenum

    International Nuclear Information System (INIS)

    Kim, Hark Rho; Park, Jin Ho; Lee, Kye Hong

    2003-01-01

    The Mo-99 is a widely used radioisotope in Korea. To fulfill the demand, we are producing Mo-99 using a specially designed and fabricated rig containing MoO 3 target. We are using natural molybdenum so far. But considering the utilization of the enriched molybdenum to increase the specific activity further, we desire the realization of PZC with (n, γ)Mo-99 as early as possible. To make the generator loading facility, we are in progress of construction work for the related hot cell facilities. (author)

  8. Actividad antioxidante de compuestos naturales nitrogenados

    Directory of Open Access Journals (Sweden)

    Maestro-Durán, R.

    1993-06-01

    Full Text Available As a continuation of the study of natural antioxidants, this third part deals with nitrogeneous compounds, classified in the following groups.

    Amino acids and proteins.
    Products of the Maillard reaction.
    Phospholipids (with choline or ethanolamine and their heating products.
    Riboflavin.
    Chlorophylls and porphyrins.
    Uric acid and derivatives.
    Their behaviour as inhibitors of the chain reaction of prooxidant radicals, by irreversible reaction or by sequestration of those radicals, as well as their synergistic action with primary antioxidants is discussed. Finally, the patents registered during the last years for these kind of compounds, their derivatives and synergists in food and other uses are cited.

    Continuando el estudio de los antioxidantes naturales, se incluyen en esta tercera parte los compuestos nitrogenados, clasificados en los siguientes grupos:
    Aminoácidos y proteínas.
    Productos de la reacción coloreada de Maillard.
    Fosfolípidos (con las bases colina y etanolamina y sus productos de calentamiento.
    Riboflavina.
    Clorofilas y porfirinas.
    Acido úrico y sus derivados.
    Se discute su comportamiento como inhibidores de la reacción en cadena de los radicales prooxidantes, por reacción irreversible o por secuestro de estos radicales, así como su acción sinergista con antioxidantes primarios. Finalmente, se citan las patentes registradas en los últimos años para estos tipos de compuestos, sus derivados y sinergistas, en productos alimentarios o en otros usos.

  9. Development of Molybdenum Adsorbent for 99Mo/99mTc Radioisotope Generator Based on Irradiated Natural Molybdenum

    International Nuclear Information System (INIS)

    Rohadi Awaludin; Hotman Lubis; Sriyono; Abidin; Herlina; Endang Sarmini; Indra Saptiama; Hambali

    2011-01-01

    Preparation of 99 Mo/ 99m Tc radioisotope generator using irradiated natural molybdenum requires an adsorbent with high absorption capacity. Zirconium-based materials (ZBM), adsorbent with adsorption capacity of about 183 mg(Mo) / g(adsorbent), has been successfully synthesized. However, the adsorbent was easily broken in the Mo adsorption process due to many fractures in the grain. To increase the hardness, the material was immersed in tetraethyl orthosilicate (TEOS) and coated by TEOS flow in a column. The hardness test results showed that the ZBM with TEOS treatment was not broken when immersed into the Mo solution. Observations using SEM showed that the fractures formed on the ZBM were successfully removed by TEOS treatment. Measurements using EDS showed that after TEOS treatment, the silicon was detected and the oxygen content increased in the material surface. Adsorption test results showed that the TEOS immersion decreased the adsorption capacity of molybdenum from 183 to 79.8 mg of Mo per gram of adsorbent. The TEOS flow-in a column gave material with relatively high adsorption capacity, 140 mgMo per gram adsorbent. The content of Silicon in the surface was lower than that of adsorbent immersed in TEOS. (author)

  10. Radionuclidic contamination of 99Mo, 131I and 103Ru in the eluate of 99Mo-99mTc chromatographic generator: comparision on fission produced 99Mo from RPC, Nordio and ARI

    International Nuclear Information System (INIS)

    Soenarjo, Sunarhadijoso; Gunawan, Adang Hardi

    1996-01-01

    The 99 Mo- 99m Tc Chromatographic generators is the most popular system to provide 99m Tc medical radioisotope. Radioisotope Production Centre (RPC)- BATAN has routinely produced the generator loaded with 99 Mo prepared by 235 U fission. By using fission produced 99 Mo, the resulting 99m Tc is potentially contaminated by other fission products which are difficult to eliminate completely. In order to study the characteristic of the generator and radionuclidic impurity pattern of the 99m Tc eluates, an evaluation of gamma spectrometric determination has been carried out. The bulk solutions of 99 Mo produced by RPC BATAN (Indonesia), Nordion (Canada) and ARI (Australia) were loaded to generators manufactured between July 1993 to May 1994. The saline-eluate 99m Tc, in a total volume of 10 ml each, was subjected to gamma spectrometric determination. The radiation of 99m Tc was eliminated by lead shield of 0.6913 cm thickness. The 99m Tc yield fluctuation from 28 generators indicated that the characteristics of the generator columns were very good. The 99m Tc eluates were consistently contaminated by 99 Mo, 131 I and 103 Ru, although the contamination level in all cases did not exceed the maximum permissible levels. The fluctuation of radionuclidic impurities were probably caused by variation in the irradiation parameter or by variation in the 99 Mo separation methods. (author), 23 refs, 1 tab, 3 figs

  11. Influence of the electrolyte in the fixation of 99 Mo in hydroxyapatite as matrix of the 99 Mo/ 99m Tc generator

    International Nuclear Information System (INIS)

    Vazquez G, S.; Badillo A, V.E.; Monroy G, F.

    2005-01-01

    The more used isotope at the moment in the services of nuclear medicine in the world is the technetium-99m. The 99m Tc emitts gamma rays of 141 keV and it semi disintegration period is of six hours, given it short half life, to produce it is necessary to order generators that are systems that allow to separate periodically at the 99m Tc of the 99 Mo by means of chromatographic techniques. In this work it is sought to evaluate the use of the hydroxyapatite, to separate molybdates 99 MoO 4 2 of pertechnetates 99m TcO 4 - and to be able to determine if it is feasible their use for to build generators of 99m Tc. With this purpose preliminary tests to know the likeness of the hydroxyapatite for the molybdates in function of the pH value, in different solutions were carried out: one of NaCl 0.9%, NaCl 2% and CaCl 2 0.01 M. The obtained results in a NaCl 0.9% solution and at to 2% to different pH values of the solution, shows that the fixation of the molybdate ions (MoO 4 -2 ) it is worthless to basic pH values of (9-11), as long as in solution of CaCI 2 0.01 M show a considerable retention of molybdate ions. (Author)

  12. The Use of Sodium Hypochlorite Solution for (n,γ99Mo/99mTc Generator Based on Zirconium-Based Material (ZBM

    Directory of Open Access Journals (Sweden)

    I. Saptiama

    2015-08-01

    Full Text Available The many problems in preparing fission product 99Mo led into this work to develop 99Mo/99mTc generator using neutron-irradiated natural MoO3 targets and, more specifically, to develop a zirconium-based material (ZBM for chromatography columns that have an adsorption capacity of more than 100 mg Mo/g ZBM. This paper reports our recent experiments in the use of sodium hypochlorite solution of various concentrations to improve the yield of 99mTc in performance of (n,γ99Mo/99mTc generators based on the ZBM. The synthesized ZBM was coated with tetraethyl orthosilicate for improving the hardness of the material. The adsorption of [99Mo]molybdate into ZBM was carried out by reacting ZBM into [99Mo]molybdate solution at 90°C to form ZBM-[99Mo] molybdate. ZBM-[99Mo]molybdate was then packed into generator column, then eluted with 10 × 1 mL of saline followed by 1 × 5 mL of NaOCl solution. The NaOCl solution concentrations used were 0.5%; 1%; 3%; and 5% for each column, respectively. This study resulted in a ZBM which has a 99Mo adsorption capacity of 167.5 ± 3.4 mgMo/g ZBM, as well as in a yield eluate of 99mTc of up to 70%, and the find that the optimum NaOCl concentration was 3%. The use of sodium hypochlorite solution affected 99Mo breakthrough. The higher sodium hypochlorite concentration used, the more 99Mo breaktrough exist on 99mTc eluate.

  13. Human reliability assessment in a 99Mo/99mTc generator production facility using the standardized plant analysis risk-human (SPAR-H) technique.

    Science.gov (United States)

    Eyvazlou, Meysam; Dadashpour Ahangar, Ali; Rahimi, Azin; Davarpanah, Mohammad Reza; Sayyahi, Seyed Soheil; Mohebali, Mehdi

    2018-02-13

    Reducing human error is an important factor for enhancing safety protocols in various industries. Hence, analysis of the likelihood of human error in nuclear industries such as radiopharmaceutical production facilities has become more essential. This cross-sectional descriptive study was conducted to quantify the probability of human errors in a 99 Mo/ 99m Tc generator production facility in Iran. First, through expert interviews, the production process of the 99 Mo/ 99m Tc generator was analyzed using hierarchical task analysis (HTA). The standardized plant analysis risk-human (SPAR-H) method was then applied in order to calculate the probability of human error. Twenty tasks were determined using HTA. All of the eight performance shaping factors (PSF S ) were evaluated for the tasks. The mean probability of human error was 0.320. The highest and the lowest probability of human error in the 99 Mo/ 99m Tc generator production process, related to the 'loading the generator with the molybdenum solution' task and the 'generator elution' task, were 0.858 and 0.059, respectively. Required measures for reducing the human error probability (HEP) were suggested. These measures were derived from the level of PSF S that were evaluated in this study.

  14. Preparation of clinical-scale 99Mo/99mTc column generator using neutron activated low specific activity 99Mo and nanocrystalline γ-Al2O3 as column matrix.

    Science.gov (United States)

    Chakravarty, Rubel; Ram, Ramu; Dash, Ashutosh; Pillai, M R A

    2012-10-01

    Preparation of clinical-scale (99)Mo/(99m)Tc generator using (n,γ) activated low specific activity (99)Mo and nanocrystalline γ-Al(2)O(3) as a high capacity sorbent matrix is attempted. Nanocrystalline γ-Al(2)O(3) was synthesized by 'solid state mechanochemical' reaction of aluminum nitrate with ammonium bicarbonate. Experimental parameters were optimized to effectively separate (99m)Tc from (99)Mo using this sorbent as the column matrix. The performance features of a 13 GBq (350 mCi) (99)Mo/(99m)Tc generator using this sorbent and (99)Mo produced by (n,γ) route having specific activity 12.9-18.5 GBq/g were evaluated for 10 days. The sorbent possessed the requisite selectivity for (99)Mo and demonstrated a maximum sorption capacity of 200 ± 5mg Mo/g, which is ~10 times higher than that of ordinary acidic alumina. The overall yield of (99m)Tc was >80%, with radionuclidic purity >99.99% and radiochemical purity >99%. The yield of (99m)Tc varied from 7.8 to 2.1 GBq in the eluate for the six days of operation of the generator. The radioactive concentration of (99m)Tc eluted was adequate for the formulation of radiopharmaceuticals. The performance of the generator remained consistent over an extended period of 10 days. The eluted (99m)Tc was suitable for the formulation of (99m)Tc-DMSA and (99m)Tc-EC resulting in high radiolabeling yields (>98%). The effectiveness of γ-Al(2)O(3) as a new generation sorbent in the development of clinically useful (99)Mo/(99m)Tc generator using low specific activity (99)Mo and yielding (99m)Tc with adequate radioactive concentration and high purity suitable for formulation of radiopharmaceuticals is demonstrated. Copyright © 2012 Elsevier Inc. All rights reserved.

  15. Material compuesto nanoestructurado con propiedades gemológicas

    OpenAIRE

    Díaz, Luis A.; Torrecillas, Ramón; Moya, J. S.; Fernández, Adolfo

    2015-01-01

    La presente invención se refiere a un material compuesto nanoestructurado que comprende al menos circona y nanoparticulas de diamante y presenta una coloración dentro del sistema de colores CIE L*a*b* correspondiente a valores del índice L* comprendidos entre 40 y 98. Es asimismo objeto de la invención el procedimiento para la obtención de dicho material compuesto.

  16. Generator of {sup 99m} Tc with MnO{sub 2} as support of {sup 99} Mo; Generador de {sup 99m} Tc con MnO{sub 2} como soporte del {sup 99}Mo

    Energy Technology Data Exchange (ETDEWEB)

    Granados C, F.; Serrano G, J. [Departamento de Quimica, Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2002-07-01

    The generator of {sup 99m} Tc with MnO{sub 2} as support of {sup 99} Mo was studied. By mean of static experiments the retention of {sup 99} Mo in MnO{sub 2} in function of the stirring time and of the p H value of the solution of {sup 99} Mo. It was found that the {sup 99} Mo presents 100% of retention in MnO{sub 2} in the rank of p H 3-11 and the balance was reached before of 10 minutes. In dynamic conditions the retention of {sup 99} Mo in MnO{sub 2} at p H=5 was also higher: 99.72%. The generated {sup 99m} Tc can be separated from {sup 99} Mo, adsorbed in MnO{sub 2} packed in the column, using distilled water at p H=5 or NaCl solution at 0.9%. With saline solution the elution yields were greater than 80% and only an aliquot of 5 ml was necessary for obtaining this yield. The better results were obtained when the column was packed with 1 g of MnO{sub 2}. The water and the saline solution were passed through of the column with a flux of 1.25 ml/min. (Author)

  17. Development and utilization of the inorganic polymer materials for {sup 99}Mo-{sup 99m}Tc and {sup 188}W-{sup 188}Re generator based on (n, gamma) method

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Kosuke; Ishikawa, Koji; Terunuma, Hitoshi; Hasegawa, Yoshio; Tatenuma, Katsuyoshi [KAKEN Co., Mito, Ibaraki (Japan)

    2003-03-01

    A molybdenum (Mo) adsorbent called PZC (Poly Zirconium Compound) with high efficiency of Mo adsorption has been developed in order to generate {sup 99m}Tc from {sup 99}Mo produced from natural Mo by (n, gamma) method. The {sup 99m}Tc generator using PZC has cleared mostly the technical subjects. By the results of many experiments, cold and hot test with {sup 99}Mo activity from low level (10{sup 5} Bq) to high level (10{sup 10} Bq), it has been confirmed that the PZC method can be practically applied for the (n, gamma) {sup 99}Mo-{sup 99m}Tc generator. From the reasons that PZC has the ability and many merits such as high adsorption capacity (>250 mg-Mo/g-PZC) of Mo, high elution yield (av. 80%) of {sup 99m}Tc, the low breakthrough (<0.05 kBq-{sup 99m}Mo/MBq-{sup 99m}Tc) of {sup 99}Mo and others, the current (n, fission) {sup 99m}Tc generator utilizing {sup 99}Mo produced from enriched uranium will be taken the place by PZC method. In this paper, the practicability of PZC and a newly developed functional material PTC(Poly Titanium Compound) as the (n, gamma) {sup 99}Mo-{sup 99m}Tc generator, and an ability of PZC as the {sup 188}W-{sup 188}Re generator will be shown. (author)

  18. Optimization of the {sup 99m} Tc generator with hydrotalcite as support of {sup 99} Mo; Optimizacion del generador de {sup 99m} Tc con hidrotalcita como soporte del {sup 99} Mo

    Energy Technology Data Exchange (ETDEWEB)

    Aranda O, N

    2004-07-01

    In the last years, in the laboratories of the National Institute of Nuclear Investigations (ININ) its have been investigating to the hydrotalcite like a material of support of the {sup 99} Mo with the purpose of developing a new technetium generator. During the development of the investigations it has been demonstrated that when putting in contact to the HTC with an aqueous solution that contains anions of any type, the HTC re hydrate and the structure is regenerated to laminate of the hydrotalcite. If the present anions in the solution are molybdate anions (MoO{sub 4}{sup 2-}), these anions passed to be part of the structure of the hydrotalcite (HT-MoO{sub 4}). These anions can contain, in turn, {sup 99} Mo in their composition ({sup 99}MoO{sub 4}{sup 2-}) and equally they can pass to be part of the structure of the hydrotalcite forming the HT-{sup 99}MoO{sub 4}. When the HT-{sup 99}MoO{sub 4} is packed in a column, the {sup 99m}Tc that it takes place when decaying the {sup 99}Mo radioactively can separate the column using aqueous solution of NaCl. This way, in previous studies (Serrano, 2000) it was found that the aqueous solution of NaCl to 0.5% it is the but appropriate for elutriate at the {sup 99m}Tc from the column the yield of the elution of the {sup 99m}Tc was since high (98%) in the first elution, and the radionuclide contamination caused by the presence of {sup 99}Mo in the eluate it was low (<0.01%). In this investigation it was also found that the HTC has a high capacity to retain molybdate ions (255.1 mg of ions MoO{sub 4}{sup 2-} for gram of HTC). These facts, standing out the high capacity of the HTC to retain molybdate ions, they drove from a direct way to investigate the optimization of the generator of {sup 99m}Tc, with hydrotalcite like support of the {sup 99}Mo, using {sup 99}Mo of low specific activity. This finishes radioactive material it can be obtained by the irradiation of the {sup 98}Mo (in the chemical form of MoO{sub 3} or (NH{sub 4

  19. Study of different absorbent materials for the preparation of generator systems of {sup 99}Mo - {sup 99m}Tc and {sup 188}W-{sup 188}Re

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Paula Regina Corain; Osso Junior, Joao Alberto, E-mail: paulinhacorain@usp.b, E-mail: jaosso@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    Amongst some currently radioisotopes, {sup 99m}Tc and {sup 188}Re present adequate decay properties for use in Nuclear Medicine. In the current times the most diagnosis examinations are performed with {sup 99m}Tc and {sup 188}Re is one radioisotope of potential use in therapy techniques. The objective of this work consists of determining the capacity of some adsorbent materials for retention of molybdenum and tungsten, aiming the optimization of generator systems of {sup 99}Mo-{sup 99m}Tc and {sup 188}W-{sup 188}Re with suitable characteristics for application in Nuclear Medicine. Known amounts, in mass, of molybdenum and tungsten were percolated through different chromatographic columns containing different commercial adsorbent materials such as: PZC (poly-zirconium compound), acid alumina and calcinated alumina used in the routine preparation of {sup 99}Mo-{sup 99m}Tc generators at IPEN. The tungsten ({sup 188}W), as well the PZC used in this project, supplied by Russia and Japan, respectively, through the International Atomic Energy Agency (IAEA) and used without any previous preparation. Also trace amounts of {sup 99}Mo and {sup 188}W were added to the initial solutions and the generators were assembled. The {sup 99}Mo-{sup 99m}Tc generators were then eluted with known volumes of 0.9% NaCl solution every 24 hours whereas the {sup 188}W-{sup 188}Re generators were eluted every 48 hours. The eluted samples were analyzed by Gamma Spectroscopy and later submitted to quality control evaluation. The results showed that the PZC presents superior retention capacity for Mo of 97.50mg Mo/gPZC, higher than in acid and calcinated alumina, however the elution efficiency at lower pHs is not so high. With regards to the experiments carried out with {sup 188}W and alumina, it was verified that the elution efficiency of {sup 188}Re was not reproducible and the retention capacity of W was 90.23mgW/gAl{sub 2}O{sub 3} at pH 7. (author)

  20. Study of different adsorbent materials for the preparation of generator systems of 99Mo - 99mTc and 188W-188Re

    International Nuclear Information System (INIS)

    Lopes, Paula Regina Corain

    2009-01-01

    Amongst some existing radioisotopes, 99m Tc and 188 Re present adequate physical chemical properties for use in Nuclear Medicine in the areas of diagnosis and therapy, respectively. Moreover, these radioisotopes can be distributed to medical centers in the form of generator systems of 99 Mo- 99m Tc and 188 W- 188 Re, allowing autonomy and practicity in use. The objective of this work consists of determining the capacity of some adsorbent materials for retention of molibdenium and tungsten, aiming the optimization of generator systems of 99 Mo- 99 mTc and 188 W- 188 Re with suitable characteristics for application in Nuclear Medicine. Known amounts, in mass, of molybdenum (Mo) and tungsten (W) were added to the loading solutions previously prepared, with values of pH adjusted between 1 and 7, and these were then percolated through different devices containing in its interior alumina, resin or poly-zirconium compound also known as PZC. The elutions were carried out within an interval of time of approximately 24 hours for the generator systems of 99 Mo - 99 mTc and 48 hours for the generator systems of 188 W- 188 Re due to the difference between the half-lives of radionuclides involved in the reactions. The eluted samples from both generator systems containing 99m Tc or 188 Re were submitted to quality control tests aiming to evaluate the radionuclidic, radiochemical and chemical purity, but no significant contamination for 99 Mo, 188 W, technetium or rhenium in the colloidal states and zirconium were detected in the eluted solutions and in the solutions extracted with saline solution for any value of pH studied. The commercial alumina cartridges known as Acid Sep Pak were more efficient in retaining the molybdenum in the loading solutions when compared with the others commercial retention devices employed. However, when this comparison extends to the chromatographic alumina columns, the use of acid alumina as adsorbent is more efficient when compared to the Acid Sep

  1. Design and simulation of the operation of a rotary valve for a portable prototype of a {sup 99m}Tc generator; Diseno y simulacion de funcionamiento de una valvula giratoria para un prototipo portatil generador de Tc-99m

    Energy Technology Data Exchange (ETDEWEB)

    Gago, Javier; Baltuano, Oscar; Hernandez, Yuri; Montoya, Eduardo [Direccion de Investigacion y Desarrollo, Instituto Peruano de Energia Nuclear, Av. Jose Saco km 12.5, Carabayllo, Lima (Peru); Lopez, Yon [Universidad Nacional de Ingenieria, Lima (Peru). Facultad de Ingenieria Mecanica y Mecanica Electrica; Direccion de Investigacion y Desarrollo, Instituto Peruano de Energia Nuclear, Av. Jose Saco km 12.5, Carabayllo, Lima (Peru)

    2013-07-01

    The design of a specific purpose rotary valve for a {sup 99m}Tc generator by extraction, which is being developed at IPEN, in order to contribute to the decentralization of nuclear medicine with social inclusion, is described and discussed in this paper. The prototype is reliable, low cost, and consists of a set of three three-way rotating valves with two positions, in a single device of Teflon®, which is driven by a servomotor. Structural analysis is reported considering external loads applied to the prototype, plus simulation and testing operation using a 12 volts servomotor of 16 RPM provided of a CNY70 infrared sensor, for control purposes. (authors).

  2. Compuestos bioactivos en harinas integrales y salvados de arroz (Oryza sativa L. Bioactive compounds in rice (Oryza sativa L. | Wholemeals and brans

    Directory of Open Access Journals (Sweden)

    Carlos Aguilar-García

    2017-10-01

    Full Text Available El consumo regular de granos enteros y sus productos puede reducir el riesgo de enfermedades crónicas tales como: las cardiovasculares, diabetes tipo II y algunos tipos de cáncer. El objetivo de este estudio fue evaluar el contenido de compuestos bioactivos en harinas integrales y salvados de arroz (variedades: Cimarrón, FONAIAP 1 y Zeta 15, tales como: fibra dietética total (FDT, determinada por método enzimático-gravimétrico; inhibidores de tripsina (IT, ácido fítico (AF y taninos condensados (TC, cuantificados por colorimetría. Se encontraron diferencias significativas (p < 0,05 para los compuestos bioactivos entre las harinas integrales y los salvados. Los salvados son una fuente rica de FDT, AF y TC. La variedad Cimarrón exhibió el mayor contenido de FDT, en el salvado (40,61 ± 0,10% y en la harina (14,04 ± 0,12%; mientras que la FONAIAP 1 mostró el menor contenido en el salvado (33,67 ± 0,64% y la harina (11,44 ± 0,24%. Los IT en harinas y salvados presentaron un intervalo de 5,70 ± 0,02 a 6,35 ± 0,35 mg/g en todas las variedades, excepto en la harina Zeta 15 (3,72 ± 0,04 mg/g. Las concentraciones de AF y TC en los salvados, presentaron valores significativamente superiores con respecto a las harinas integrales. Los hallazgos demostraron que las harinas integrales y los salvados de arroz analizados en este estudio, pueden suministrar a la dieta importantes compuestos bioactivos (FDT, IT, AF y TC de gran significancia para la salud. Los salvados mostraron ser una fracción del arroz con alta concentración de FDT, AF y TC.

  3. Estudio del comportamiento tribológico de materiales compuestos

    OpenAIRE

    Planells Torres, Mariano

    2017-01-01

    Los materiales compuestos se utilizan cada vez más en el diseño de piezas estructurales para la fabricación de automóviles con el fin de fabricar vehículos más ligeros, más seguros y más eficientes. Para obtener las piezas deseadas, los materiales compuestos se deben conformar en las geometrías elegidas por medio de herramientas de conformación a la temperatura de curado necesaria. El conocimiento de la interacción material-herramienta durante los procesos de conformado es crucial durante el ...

  4. Design and simulation of the operation of a rotary valve for a portable prototype of a 99mTc generator

    International Nuclear Information System (INIS)

    Gago, Javier; Baltuano, Oscar; Hernandez, Yuri; Montoya, Eduardo; Lopez, Yon

    2013-01-01

    The design of a specific purpose rotary valve for a 99m Tc generator by extraction, which is being developed at IPEN, in order to contribute to the decentralization of nuclear medicine with social inclusion, is described and discussed in this paper. The prototype is reliable, low cost, and consists of a set of three three-way rotating valves with two positions, in a single device of Teflon®, which is driven by a servomotor. Structural analysis is reported considering external loads applied to the prototype, plus simulation and testing operation using a 12 volts servomotor of 16 RPM provided of a CNY70 infrared sensor, for control purposes. (authors).

  5. Evaluation of the 99Mo contamination in eluates samples generated of 99mTc in a clinic of Recife, Brazil

    International Nuclear Information System (INIS)

    Andrade, W.G.; Lima, F.F.

    2008-01-01

    This study evaluates the 99 Mo content in eluates of 99 Mo/ 99 m Tc generators, used in a nuclear medicine service in Recife. To do this, were collected eluates samples from 5 elution of 10 different generators using the attenuation method in own nuclear medicine service which provided routine activimeter CRC-127R model, manufactured by Capintec. The samples were measured, and the activities of 99m Tc and 99 Mo were determined and calculated the MBT (molybdenum break through) for 1 st , 3 rd , 5 th , 7 th and 9 th elution of each generator. It was observed in a sample the presence of molybdenum in the amount near the limit set by the United States Pharmacopoeia (USP), 0,15μCi/mCi). A second sample presented good high value, more than double the USP limit. The results obtained demonstrate the possibility of finding 99 Mo in the eluted solution, which reinforces the need to deploy the control test of the molybdenum content in all elution in quality control programs of service nuclear medicine

  6. Tc7, a Tc1-hitch hiking transposon in Caenorhabditis elegans.

    OpenAIRE

    Rezsohazy, R; van Luenen, H G; Durbin, R M; Plasterk, R H

    1997-01-01

    We have found a novel transposon in the genome of Caenorhabditis elegans. Tc7 is a 921 bp element, made up of two 345 bp inverted repeats separated by a unique, internal sequence. Tc7 does not contain an open reading frame. The outer 38 bp of the inverted repeat show 36 matches with the outer 38 bp of Tc1. This region of Tc1 contains the Tc1-transposase binding site. Furthermore, Tc7 is flanked by TA dinucleotides, just like Tc1, which presumably correspond to the target duplication generated...

  7. Quality control studies of 99Mo used in 99Mo/99mTc generators produced at IPEN/CNEN-SP, Brazil

    International Nuclear Information System (INIS)

    Said, Daphne S.; Brambilla, Tania P.; Matsuda, Margareth M.N.; Osso Junior, Joao A.

    2015-01-01

    99m Tc is the most used radionuclide in nuclear medicine. In Brazil, the 99 Mo/ 99m Tc generators are produced exclusively by the Center of Radiopharmacy at IPEN-CNEN/SP, by importing 99 Mo from different suppliers. 99 Mo (t 1/2 = 66 h) is a fission product of 235 U, therefore, it can be accompanied by several radioisotopes that are highly prejudicial for human health, demanding a strict quality control of this product for generators safe use. The European Pharmacopoeia established some parameters and limits that evaluate the quality of the solution of sodium [ 99 Mo]molybdate, that is used as raw material for generator's production. The European Pharmacopoeia also recommends some analytical methods to perform these evaluations, however, it has been observed difficulties on the implementation of these methods by the generator's producers. These difficulties are probably related to the lack of practicability of the proposed methods and the extensive list of utilized reagents. In this work some procedures of the European Pharmacopoeia's quality control method for 99 Mo were evaluated. Different types of solid phase exchanger cartridges were tested for retention of 99 Mo in 3 different conditions. Cartridges that presented percentages of retention higher than 90% were also tested for separation of 99 Mo from possible contaminants (Ru e Te). The results shown that solid phase exchanger cartridges that presented percentages of retention of Mo higher than 90% also presented significant percentages of retention of Ru and Te. An alternative method for separation of 99 Mo from 131 I (other contaminant) are also proposed. (author)

  8. Quality control studies of {sup 99}Mo used in {sup 99}Mo/{sup 99m}Tc generators produced at IPEN/CNEN-SP, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Said, Daphne S.; Brambilla, Tania P.; Matsuda, Margareth M.N.; Osso Junior, Joao A., E-mail: daphnesaid@usp.br, E-mail: taniabrambilla@yahoo.com.br, E-mail: mmatsuda@ipen.br, E-mail: jaosso@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    {sup 99m}Tc is the most used radionuclide in nuclear medicine. In Brazil, the {sup 99}Mo/{sup 99m}Tc generators are produced exclusively by the Center of Radiopharmacy at IPEN-CNEN/SP, by importing {sup 99}Mo from different suppliers. {sup 99}Mo (t{sub 1/2} = 66 h) is a fission product of {sup 235}U, therefore, it can be accompanied by several radioisotopes that are highly prejudicial for human health, demanding a strict quality control of this product for generators safe use. The European Pharmacopoeia established some parameters and limits that evaluate the quality of the solution of sodium [{sup 99}Mo]molybdate, that is used as raw material for generator's production. The European Pharmacopoeia also recommends some analytical methods to perform these evaluations, however, it has been observed difficulties on the implementation of these methods by the generator's producers. These difficulties are probably related to the lack of practicability of the proposed methods and the extensive list of utilized reagents. In this work some procedures of the European Pharmacopoeia's quality control method for {sup 99}Mo were evaluated. Different types of solid phase exchanger cartridges were tested for retention of {sup 99}Mo in 3 different conditions. Cartridges that presented percentages of retention higher than 90% were also tested for separation of {sup 99}Mo from possible contaminants (Ru e Te). The results shown that solid phase exchanger cartridges that presented percentages of retention of Mo higher than 90% also presented significant percentages of retention of Ru and Te. An alternative method for separation of {sup 99}Mo from {sup 131}I (other contaminant) are also proposed. (author)

  9. Experimental biodistribution studies of 99mTc-recombinant human serum albumin (rHSA): a new generation of radiopharmaceutical

    International Nuclear Information System (INIS)

    Perkins, A.C.; Frier, M.

    1994-01-01

    Recombinant human serum albumin (rHSA) produced by cultured fermentation has been prepared in the form of microcapsules nominally 3-5 μm in diameter and radiolabelled with technetium-99m following reduction with stannous chloride. Radiochemical purity was assessed by chromatography on instant thin-layer chromatography and found to be greater than 90%. No evidence of aggregation was seen by microscopic examination. Imaging biodistribution studies in New Zealand white rabbits demonstrated targeting to the liver or lung, respectively, depending upon the size and surfactant properties of the microcapsules. This communication is the first to show scintigraphic studies using 99m Tc-labelled rHSA with the potential for lung, liver and cardiovascular imaging and demonstrates that recombinant DNA technology offers an important new source of materials suitable for use as radiopharmaceuticals without the need for pooled human blood products. (orig.)

  10. Design and setup of a portable stirring device for transfer and dissolution of {sup 99}Mo applied to the use of a {sup 99m}Tc generator; Diseno e implementacion de un modulo portatil para el traslado y disolucion de Mo-99 aplicado al empleo de un generador de Tc-99m

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, Yon [Universidad Nacional de Ingenieria, Lima (Peru). Facultad de Ingenieria Mecanica; Urquizo, Rafael [Universidad Tecnologica del Peru, Lima (Peru). Facultad de Ingenieria de Sistemas y Electronica; Mendoza, Pablo [Direccion de Investigacion y Desarrollo, Instituto Peruano de Energia Nuclear, Lima (Peru); Rojas, Jorge [Universidad Nacional Mayor San Marcos, Lima (Peru). Facultad de Quimica e Ingenieria Quimica

    2014-07-01

    This work shows the design and implementation of a portable magnetic stirring device for transfer and efficient dissolution of Mo{sub O}3 coupled to a {sup 99m}Tc generator prototype. The development of this equipment will enable an efficient and safe transfer of {sup 99}Mo at a 2 Ci of maximum activity from the nuclear reactor Huarangal to the point of operation of the {sup 99m}Tc generator equipment. This article describes the mechanical design, volume and shielding calculation, the electronics design and the programmable speed control of the stirring system for radioactive samples. (authors).

  11. Comparative study of {sup 99}Mo/{sup 99m}Tc generators at base of synthesized gels starting from activation and fission {sup 99}Mo; Estudio comparativo de generadores {sup 99}Mo/{sup 99m}Tc a base de geles sintetizados a partir de {sup 99}Mo de activacion y de fision

    Energy Technology Data Exchange (ETDEWEB)

    Lopez M, I Z [UAEM, Paseo Colon esq. Paseo Tollocan, 50120 Toluca, Estado de Mexico (Mexico); Monroy G, F; Rivero G, T; Rojas N, P [ININ, Carretera Mexico -Toluca S/N, 52045 La Marquesa Ocoyoacac, Estado de Mexico (Mexico)

    2007-07-01

    The {sup 99m}Tc is used for diagnostic and therapy. It is produced starting from {sup 99}Mo, absorbed in chromatographic columns, loaded with alumina that absorb only 0.2% of {sup 99}Mo with high specific activities of {sup 99}Mo, obtained from the {sup 235}U fission. Given these conditions and limitations, new preparation procedures of {sup 99}Mo/{sup 99m}Tc generators, its have been developed, using zirconium molybdates gels that incorporates until 30% of {sup 99}Mo, conserve similar characteristics of quality and purity that the traditional generator. The radiochemical characteristics of the {sup 99m}Tc elution, depend strongly on the gel preparation conditions. In particular, the present work has by object to determine the influence of the {sup 99}Mo used type, fission or activation product, during the gels synthesis, as well as the used air flow for the agitation in the gels preparation and its influence in the {sup 99}Mo/{sup 99m}Tc generators quality. When diminishing the flow of agitation air the efficiency it increases and in the radionuclide purity of the eluates and when using {sup 99}Mo from fission for the gels production it increases in an important way the elutriation efficiency, the radiochemical and radionuclide purity of the {sup 99m}Tc eluates. (Author)

  12. Influence of alumina phases on the molybdenum adsorption capacity and chemical stability for {sup 99}Mo/{sup 99m}Tc generators columns

    Energy Technology Data Exchange (ETDEWEB)

    Guedes-Silva, Cecilia C.; Ferreira, Thiago dos Santos; Paula, Carolina M. de; Otubo, Larissa, E-mail: cecilia.guedes@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Carvalho, Flavio M.S. [Universidade de Sao Paulo (IGC/USP), SP (Brazil). Instituto de Geociencias

    2016-07-15

    Technetium-{sup 99m} is the clinically most used radionuclide worldwide. Although many techniques can be applied to separate {sup 99}Mo and {sup 99m}Tc, the most commonly used method is the column chromatography with alumina as stationary phase. However, the alumina nowadays used has limited adsorption capacity of molybdate ions which implies the need to develop or improve materials to produce high specific activity generators. In this paper, alumina was obtained by a solid state method and heat treatments at different conditions. The powders had a microstructure with porous particles of γ, δ, θ and α-Al{sub 2}O{sub 3} phases as well as specific surface area between 36 and 312 m{sup 2} g{sup -1}. Most interesting results were reached by powders calcined at 900 deg C for 5 hours which had high chemical stability and a molybdenum adsorption capacity of 92.45 mg Mo per g alumina. (author)

  13. Compuestos beta-lactámicos inhibidores de APAF1

    OpenAIRE

    Messeguer Peypoch, Ángel; Alfonso, Ignacio; Corredor, Miriam; Pérez-Payá, Enrique; Orzáez Calatayud, Mar

    2012-01-01

    La presente invención se refiere a compuestos para la prevención y/o tratamiento de trastornos causados por muerte celular por apoptosis o para la prevención de procesos degenerativos causados por la muerte celular por apoptosis, a través de la inhibición del factor de activación de la peptidasa apoptótica 1 (APAF1, Apoptotic Peptidase Activating Factor 1)

  14. Studies of the effect of irradiation in a nuclear reactor, of targets containing Mo used for the preparation of 99Mo gel, material that constitutes the 99Mo - 99mTc generators

    International Nuclear Information System (INIS)

    Nieto, Renata Correa

    2004-01-01

    The most used radioisotope in Nuclear Medicine is 99m Tc, obtained in the 99 Mo - 99m Tc generator form. 99 Mo can be produced by several nuclear reactions in Cyclotron and Reactor. The production in Cyclotron is not technically and commercially feasible. The production in Nuclear Reactor can be made in two ways: 235 U fission and 99 Mo (n,γ) 99 Mo reaction. A project aiming the production of 99 Mo by activation of Mo is under way at IPEN, producing a gel type MoZr generator. There are two ways of preparing the gel and the generators: by irradiating MoO 3 and preparing the gel or by the preparation of the gel and further irradiation. This work consists in the study of the irradiation effects in several targets containing Mo for the production of 99 Mo by the 98 Mo (n,γ) 99 Mo reaction and further preparation of the gel for use as a gel type 99 Mo - 99m Tc generator. Three rinds of gel were studied: zirconium, titanium and cerium molybdate, and their morphology, infrared structure and elution yield of 99m Tc were analysed. The best results were achieved with the generators prepared with MoZr post formed gel, with amorphous structure and better elution yields. The pre formed gel induced crystallinity and worst performance of the generators. (author)

  15. Comparison of elution efficiency of 99Mo/99mTc generator using theoretical and a free web based software method

    International Nuclear Information System (INIS)

    Kiran Kumar, J.K.; Sharma, S.; Chakraborty, D.; Singh, B.; Bhattacharaya, A.; Mittal, B.R.; Gayana, S.

    2010-01-01

    Full text: Generator is constructed on the principle of decay growth relationship between a long lived parent radionuclide and short lived daughter radionuclide. Difference in chemical properties of daughter and parent radionuclide helps in efficient separation of the two radionuclides. Aim and Objectives: The present study was designed to calculate the elution efficiency of the generator using the traditional formula based method and free web based software method. Materials and Methods: 99 Mo/ 99m Tc MON.TEK (Monrol, Gebze) generator and sterile 0.9% NaCl vial and vacuum vial in the lead shield were used for the elution. A new 99 Mo/ 99m Tc generator (calibrated activity 30GBq) calibrated for thursday was received on monday morning in our department. Generator was placed behind lead bricks in fume hood. The rubber plugs of both vacuum and 0.9% NaCl vial were wiped with 70% isopropyl alcohol swabs. Vacuum vial placed inside the lead shield was inserted in the vacuum position simultaneously 10 ml NaCl vial was inserted in the second slot. After 1-2 min vacuum vial was removed without moving the emptied 0.9%NaCl vial. The vacuum slot was covered with another sterile vial to maintain sterility. The RAC was measured in the calibrated dose calibrator (Capintec, 15 CRC). The elution efficiency was calculated theoretically and using free web based software (Apache Web server (www.apache.org) and PHP (www.php.net). Web site of the Italian Association of Nuclear Medicine and Molecular Imaging (www.aimn.it). Results: The mean elution efficiency calculated by theoretical method was 93.95% +0.61. The mean elution efficiency as calculated by the software was 92.85% + 0.89. There was no statistical difference in both the methods. Conclusion: The free web based software provides precise and reproducible results and thus saves time and mathematical calculation steps. This enables a rational use of available activity and also enabling a selection of the type and number of

  16. Altered [99mTc]Tc-MDP biodistribution from neutron activation sourced 99Mo.

    Science.gov (United States)

    Demeter, Sandor; Szweda, Roman; Patterson, Judy; Grigoryan, Marine

    2018-01-01

    Given potential worldwide shortages of fission sourced 99 Mo/ 99m Tc medical isotopes there is increasing interest in alternate production strategies. A neutron activated 99 Mo source was utilized in a single center phase III open label study comparing 99m Tc, as 99m Tc Methylene Diphosphonate ([ 99m Tc]Tc-MDP), obtained from solvent generator separation of neutron activation produced 99 Mo, versus nuclear reactor produced 99 Mo (e.g., fission sourced) in oncology patients for which an [ 99m Tc]Tc-MDP bone scan would normally have been indicated. Despite the investigational [ 99m Tc]Tc-MDP passing all standard, and above standard of care, quality assurance tests, which would normally be sufficient to allow human administration, there was altered biodistribution which could lead to erroneous clinical interpretation. The cause of the altered biodistribution remains unknown and requires further research.

  17. Preparation of a gel of zirconium molybdate for use in the generators of 99 Mo - 99m Tc prepared with 99 Mo produced by the 98 Mo(n,γ)99 Mo reaction

    International Nuclear Information System (INIS)

    Osso Junior, Joao A.; Lima, Ana Lucia V.P.; Silva, Nestor C. da; Nieto, Renata C.; Velosa, Adriana C. de

    1998-01-01

    IPEN develops a project concerning the preparation of a gel of Zirconium Molybdate for use in the generators of 99 Mo- 99m Tc . 99m Tc is the most used radioisotope in nuclear medicine diagnosis procedures and nowadays the generators are being prepared with imported 99 Mo, produced by 235 U fission. The production of 99 Mo by the 98 Mo(n, γ) 99 Mo reaction is now possible because of the power upgrade of IPEN's IEA-R1 reactor, from 2 to 5 MW. This work describes the preparation method of Zirconium Molybdate gel that will be used in the 99 Mo- 99m Tc generators. The gel is prepared by the chemical reaction between Mo, in Mo O 3 form, and Zr, in Zr O Cl 2 .8H 2 O form. After the reaction, the gel is filtered, dried and cracked with saline solution. The product is then loaded into glass columns for use as 99m Tc generator. The results showed the good quality of the gel prepared at laboratory level and of the generators evaluated. (author)

  18. Production and availability of 99mTc generators and of 99Mo: technology considerations and the IAEA's contributions

    International Nuclear Information System (INIS)

    Ramamoorthy, N.; )

    2007-01-01

    The serendipitous discovery of 99m T c generator at the BNL, USA in 1957 laid the foundation for the subsequent revolution of in vivo imaging of physiological functions in humans to aid diagnostic decisions and patient management. The widespread use of diagnostic imaging in nuclear medicine would not have attained a pre-eminent status world over but for the 99m T c generator and 99m T c labelled products. In order to sustain the nearly 20 million studies annually performed using 99m T c , it is of utmost importance to assure access to appropriate technologies for continued, reliable availability of 99m T c generators and in turn, that of the raw material radionuclide 99 Mo required in extremely large quantities. A walk down the path of their production technologies to trace the trends and issues reveals several major milestones. The IAEA has been involved for well over three decades in fostering developments in 99m T c generator systems through (i) implementation of a number of CRPs including an on-going one related to the production of 99 Mo using LEU targets, (ii) arranging expert reviews through Technical/Consultancy Meetings and (iii) publication of various technical documents, e.g. IAEA-TECDOC: 515 (1989), 852, (1995), 1051 (1998) and 1065 (1999). The IAEA has also supported a number of interested Member States in establishing and/or operating 99m T c generator production facilities, as for example in Bangladesh, China, Indonesia, Iran, Pakistan and Syria. The author has been involved in several of the above initiatives of the IAEA and was also an active participant in the Indian programmes on 99m T c generators during 1972 to 2003. The present review is accordingly tailored as a narration, interspersed with the IAEA's important contributions and glimpses of the Indian scenario. (author)

  19. Preparation of 99Mo for 99mTc generators and the issue of further development. A survey report

    International Nuclear Information System (INIS)

    Malek, Z.

    1998-01-01

    The following topics are dealt with: World production of Mo-99 for technetium generators; Typical procedures for the preparation of Mo-99; Current and expected decline in the production of Mo-99; and Directions of further development (Water reactors-irradiation systems for the preparation of Mo-99; Homogeneous reactor systems for the preparation of Mo-99 based on molten salts; Systems with accelerators; Thermal processes for the reprocessing of irradiated target material). (P.A.)

  20. Relaciones de equivalencia con estímulos compuestos

    Directory of Open Access Journals (Sweden)

    Aldo Hernández, Sonia Céspedes, Leonardo Prieto

    2007-03-01

    Full Text Available El propósito de la presente investigación fue identificar las relaciones emergentes de entrenamientos entre estímulos muestra simples con estímulos de comparación compuestos. El estudio realizado corresponde a una investigación de tipo intrasujeto. Se contó con diez estudiantes universitarios, seis hombres y cuatro mujeres, con edades entre los 17 y 22 años de edad fueron escogidos por conveniencia y recibieron entrenamiento en discriminación condicional a través de tareas de igualación a la muestra arbitraria de tres elecciones por medio de un aplicativo en Visual Basic. En el primer y segundo bloque de entrenamiento se establecieron las relaciones condicionales entre estímulos muestra simples y estÌmulos de comparación compuestos (ej., A1-B1B1; A2-B2B2; A3-C3C3 y B1-C1C1; B2-C2C2; B3-C3C3 y se conformaron tres clases equivalentes de tres miembros cada una (ej., A1A1-B1B1-C1C1, asÌ como relaciones equivalencia-equivalencia (ej. A1A2- B1B2-C1C2. Cuatro de los diez participantes mostraron relaciones emergentes de simetrÌa, transitividad y equivalencia junto con relaciones equivalencia-equivalencia. Estos hallazgos indican que los entrenamientos entre estímulos simples y compuestos o viceversa producen relaciones emergentes propias de la equivalencia de estímulos.

  1. Odontoma compuesto. Una patología oral a considerar

    Directory of Open Access Journals (Sweden)

    Jonathan Harris Ricardo

    2013-10-01

    Full Text Available Resumen El odontoma es el tumor odontogénico mixto con mayor frecuencia de aparición, las células y los tejidos son normales pero de estructura defectuosa, la etiología se le relaciona con restos paradentales de malassez y traumatismos, son de crecimiento limitado, asintomáticos, producen retención dentaria; se clasifica en compuesto y complejo, radiográficamente se presenta halo radiolúcido con múltiples imágenes radiopacas en su interior, con un patrón ordenado para el odontoma compuesto y en el odontoma complejo se presenta imagen radiopaca como conglomeraciones amorfas, con un patrón desordenado. El tratamiento es quirúrgico y su recurrencia es baja. Se reporta caso de paciente femenina de 30 años de edad, que acudió a la consulta del servicio de estomatología y cirugía oral de la Universidad de Cartagena Colombia, porque presentó, lesión tumoral que comprometía la zona de órganos dentarios 33 y 34, se realizó examen radiográfico, con diagnóstico presuntivo de odontoma compuesto, se programó la cirugía y se realizó enucleación de la lesión tumoral la cual se envió a patología; en el reporte histopatológico se diagnosticó odontoma compuesto. (DUAZARY 2010, 91 - 94Abstract The odontoma is the mixed odontogenic tumor observed with greater frequency. Cells and tissues are normal in structure but is defective in pattern. Etiology is associated with remainders of malassez paradentales tissues and trauma and injuries. They are growing limited, asymptomatic, produce tooth retention. They were classified as compound and complex radiographic radiolucent halo is presented with multiple radiopaque images inside it, with a pattern for the ordered compound odontoma and complex odontoma presents the image as radiopaque amorphous clusters with a disordered pattern. The treatment is surgical and recurrence is low. We report the case of female patient aged 30, who attended the service of dentistry and oral surgery at the

  2. Computed tomography image using sub-terahertz waves generated from a high-Tc superconducting intrinsic Josephson junction oscillator

    International Nuclear Information System (INIS)

    Kashiwagi, T.; Minami, H.; Kadowaki, K.; Nakade, K.; Saiwai, Y.; Kitamura, T.; Watanabe, C.; Ishida, K.; Sekimoto, S.; Asanuma, K.; Yasui, T.; Shibano, Y.; Tsujimoto, M.; Yamamoto, T.; Marković, B.; Mirković, J.; Klemm, R. A.

    2014-01-01

    A computed tomography (CT) imaging system using monochromatic sub-terahertz coherent electromagnetic waves generated from a device constructed from the intrinsic Josephson junctions in a single crystalline mesa structure of the high-T c superconductor Bi 2 Sr 2 CaCu 2 O 8+δ was developed and tested on three samples: Standing metallic rods supported by styrofoam, a dried plant (heart pea) containing seeds, and a plastic doll inside an egg shell. The images obtained strongly suggest that this CT imaging system may be useful for a variety of practical applications

  3. Stage 1 performance qualification of heat-ventilation air-conditioning (HVAC) system for the manufacturing of Tc-99m Generator at Nuclear Malaysia

    International Nuclear Information System (INIS)

    Yen Ng; Noriah Jamal; Rehir Dahalan; Wan Anuar Wan Awang; Noraisyah Yusof; Shaharum Ramli; Jusnan Hashim; Ariff Hamzah; Wan Firdaus Wan Ishak; Yahaya Talib; Othman Mahmud; Asmah Mohibat; Shafii Khamis; Zulkifli Mohamed Hashim; Zakaria Ibrahim; Shaaban Kasim

    2007-01-01

    Manufacturing of Tc-99m generator is carried out in clean room Block 21 of Malaysian Nuclear Agency, which need to comply current Good Manufacturing Practice requirement. High-ventilation air conditioning (HVAC) is a new renovated system. It is a critical system for maintaining suitable temperature, relative humidity and pressure differential in the clean room. The objective of this paper is to present results on Stage 1 Performance Qualification (PQ) for HVAC. This PQ stage 1 was done from 7 February 2007 till 16 March 2007. Temperature, Relative Humidity and Pressure Differential for each compartment in the clean room was monitored twice daily. The Measurement of air-born particle count was done weekly. Settle plate for microbial test was also done weekly. The results were then analyzed and compared with the pre-determined specification. We found that temperature was within the specs, namely 24 +20 degree C. Relative humidity was less than 65%. Pressure differential shows variation, some compartments are below the specs namely 1-3 mm H 2 O. Air-born particle and microbial test also meet the requirement. The results show that all parameters meeting the specs excepts for the pressure differential for certain compartments are a bit low, but is sufficient to create proper air flow and not cause any risk of cross contamination. The existing HVAC system in the clean room is in compliance to the pre-determined specification. However, further improvement can be made by increasing the pressure differential between compartments. (Author)

  4. Actividad antioxidante de los compuestos fenólicos

    Directory of Open Access Journals (Sweden)

    Maestro Durán, R.

    1993-04-01

    Full Text Available This review deals with the oxidation processes induced by light and atmospheric oxygen, as well as the protective action on antioxidant compounds. The available data on the synthetic antioxidants and the problems associated to their use, together with the presence of natural phenolic antioxidants in plants, have been revised. These phenolic antioxidants have been classified in families: phenolic alcohols and acids, cinnamic acids, coumarins, favonoids (flavones and isoflavones, flavonols, flavanones and other phenolic compounds.

    Este trabajo recoge los estudios sobre los mecanismos de oxidación producida por la luz y el oxígeno del aire y sobre la protección de los compuestos antioxidantes contra esta oxidación. Se han revisado los datos existentes sobre los inconvenientes de los antioxidantes sintéticos, que aconsejan sustituirlos por otros naturales y sobre la presencia de antioxidantes naturales de carácter fenólico en las plantas. Los antioxidantes fenólicos se han agrupado por familias: alcoholes y ácidos fenólicos, ácidos cinámicos, cumarinas, flavonoides (flavonas e isoflavonas, flavonoles, flavanonas y otros compuestos fenólicos.

  5. Importance of a 99Mo/99mTc generator and a perspective of nuclear medicine in the face of the difficult situation of supply shortage of 99mTc from the view-point of a nuclear medicine specialist

    International Nuclear Information System (INIS)

    Kosuda, Shigeru

    2010-01-01

    In this review a list of commercially available 99m Tc-labeled radiopharmaceuticals was presented, and the significance to use them clinically was described in the face of this difficult situation due to the 99m Tc shortage. The supply history and the chronological change in the sales of 99 Mo/ 99m Tc generators in Japan were also described. I emphasize the importance of a nationwide spread of dedicated single photon emission computed tomography (SPECT)/CT equipments, which provide not only a simultaneous acquisition of dual tracers, but also information on both function and morphology. The present issues to address this difficult situation were discussed, referring to the summary of the Organization for Economic Co-operation and Development (OECD)/the Nuclear Energy Agency (NEA) workshop held in Paris and the press conference at the 56 th Society of Nuclear Medicine (SNM) annual meeting held in Toronto. The results of a questionnaire survey conducted in Saitama prefecture suggested the procedures, such as a domestic self-supply of 99 Mo, to resolve the issues related to the shortage. In addition, the ongoing Japan Materials Testing Reactor (JMTR) project regarding self-supply of 99 Mo was described. Based on a reliable supply of 99m Tc, the following suggestions to develop nuclear medicine were presented from the viewpoint of a nuclear medicine specialist; development of a brand-new SPECT/CT equipment using semi-conductor, clinical application of new tracers, and reassessment of the existing SPECT studies. (author)

  6. Determination of radionuclidic impurities in 99mTceluate from 99Mo/99mTc generator for quality control

    DEFF Research Database (Denmark)

    Hou, Xiaolin

    2017-01-01

    , 89Sr and 90Sr. Radioactive decay for removal of 99mTc, ion exchange and extraction chromatography for removal of 99Mo and 99Tc are effective for separation of interferences. Gamma spectrometry, LSC with alpha/beta discrimination, and Cherenkov counting using LSC are sensitive methods for measurement...... of the impurity radionuclides. The detection limits of this method are well meet the requirement of the quality control according to the limitation of the pharmacopoeia....

  7. Desarrollo de materiales compuestos tipo Cermet de matriz Fe

    Directory of Open Access Journals (Sweden)

    Gordo, E.

    2004-04-01

    Full Text Available The objective of this study aims to the development of Fe-matrix composites with high carbide content to achieve properties between high-speed steels (HSS and cemented carbides. Cemented carbides are harder and show higher wear resistance than HSS, but lower toughness. Besides, the substitution of Co or Ni for other binders is desirable due to the carcinogen character of these metals. In this work, a material constituted by an iron matrix and a 50 % wt of WC and TaC carbides is developed. Highenergy milling has been used to obtain composite powders presenting a good bonding and homogeneous distribution of the carbides in the matrix. Those powders were characterised and compacted by die pressing. The green compacts were sintered at different temperatures, and properties like hardness and density were determined. Also, the wear behaviour was studied and microstructural analysis by SEM was carried out to complete the study.

    El objetivo de este trabajo es el desarrollo de materiales compuestos de matriz Fe con alto contenido en carburos con propiedades entre los aceros rápidos y los carburos cementados, ya que estos últimos son más duros y presentan mayor resistencia al desgaste que los primeros pero también menor tenacidad. Además, se hace deseable la sustitución de Co o Ni por otros aglomerantes debido a los riesgos medioambientales y para la salud que estos metales representan. En este trabajo se estudia la obtención de un material formado por una matriz de acero con adición de 50 % en masa de carburos de wolframio (WC y tantalio (TaC. Para ello se han utilizado técnicas de molienda de alta energía que permiten obtener un polvo compuesto con una buena unión metal-cerámica y una distribución homogénea de carburos en la matriz. Después de la caracterización del polvo compuesto se compactaron probetas en matriz uniaxial con objeto de estudiar la sinterabilidad del material. Los compactos fueron sinterizados en vacío a

  8. Influence of the electrolyte in the fixation of {sup 99} Mo in hydroxyapatite as matrix of the {sup 99} Mo/ {sup 99m} Tc generator; Influencia del electrolito en la fijacion de {sup 99} Mo en hidroxiapatita coma matriz del generador {sup 99} Mo/ {sup 99m} Tc

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez G, S.; Badillo A, V.E. [UAZ, Zacatecas (Mexico); Monroy G, F. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: s_vazgro@hotmail.com

    2005-07-01

    The more used isotope at the moment in the services of nuclear medicine in the world is the technetium-99m. The {sup 99m} Tc emitts gamma rays of 141 keV and it semi disintegration period is of six hours, given it short half life, to produce it is necessary to order generators that are systems that allow to separate periodically at the {sup 99m}Tc of the {sup 99} Mo by means of chromatographic techniques. In this work it is sought to evaluate the use of the hydroxyapatite, to separate molybdates {sup 99} MoO{sub 4}{sup 2} of pertechnetates {sup 99m}TcO{sub 4}{sup -} and to be able to determine if it is feasible their use for to build generators of {sup 99m} Tc. With this purpose preliminary tests to know the likeness of the hydroxyapatite for the molybdates in function of the pH value, in different solutions were carried out: one of NaCl 0.9%, NaCl 2% and CaCl{sub 2} 0.01 M. The obtained results in a NaCl 0.9% solution and at to 2% to different pH values of the solution, shows that the fixation of the molybdate ions (MoO{sub 4}{sup -2}) it is worthless to basic pH values of (9-11), as long as in solution of CaCI{sub 2} 0.01 M show a considerable retention of molybdate ions. (Author)

  9. Performance study of molybdenum gels with titanium for preparation of {sup 99}Mo-{sup 99m}Tc generators; Estudo do desempenho de geis de molibdenio com titanio no preparo de geradores de {sup 99}Mo-{sup 99m}Tc

    Energy Technology Data Exchange (ETDEWEB)

    Moraes, Vanessa; Osso Junior, Joao Alberto [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: vmoraes@ipen.br

    2005-07-01

    {sup 99m}Tc is the most used radioisotope in Nuclear Medicine, due to nuclear characteristics. It is obtained by the radioactive decay of {sup 99}Mo, generator of radioisotope system. When {sup 99}Mo is produced by the activation in reactor, the most used technique for the preparation of the generators is the gel type generator, which incorporates {sup 99}Mo to the gel that is insoluble, chemically inert to the solutions and with properties of ion exchange. Several countries had already studied this methodology, as is the case of Vietnam, India, China, Australian. This work has the objective of studying the performance and characterization of molybdenum gels with titanium. Four variables in the preparation of the gel were studied: mass ratio between Mo and Ti (1.80 and 2.25), concentration of NaOH (2 and 4 mol/L), final temperature (25 and 50 deg C) and pH (3.5 and 4.5). The prepared gels were analyzed with relation to the size of its particles, identification of its structure, amount of molybdenum, amount of titanium, profile of elution, pH of the elution, determination of the radioisotopes in the eluate and final radiochemical purity. The final result is a formularization of the gel with the best characteristics for posterior preparation of the generator of {sup 99m}Tc-{sup 99}Mo. (author)

  10. Tc(V)-DMS tumour imaging agent

    International Nuclear Information System (INIS)

    Horiuchi, K.; Yomoda, I.; Yokoyama, A.; Endo, K.; Torizuka, K.

    1986-01-01

    The data obtained by the authors provide good evidence of Tc(V)-DMS as a stable, large-molecular-size Tc-complex or polynuclear Tc-complex, comparable to Tc-cit and Ga-cit. A role for this polynuclear configuration in the generation of Tc-species with affinity for neoplastic cells was demonstrated using the dilution method as a promoter of Tc(V)-DMS dissociation. The concurrent Ehrlich ascites tumour cell uptake studies with TLC analysis revealed the chromatographically detected changes well traced by the biological cell utilization. The biological implications of dilution as one of the factors regulating radiopharmaceutical delivery to the tumour cell tissue were better demonstrated in the biodistribution studies carried out with Erhlich ascites-bearing mice. If, on the basis of the present data, the authors may take their postulate one step further, a more dissociated Tc-species, defined speculatively as TcO/sub 4//sup 3-/, might constitute an active Tc- species within the cell interacting with some tumour-specific substance or site. Research to find evidence of its presence is currently in progress

  11. High-Tc superconductor applications

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    There has been much speculation about new products and business opportunities which high-Tc superconductors might make possible. However, with the exception of one Japanese survey, there have not been any recognized forecasts suggesting a timeframe and relative economic impact for proposed high-Tc products. The purpose of this survey is to provide definitive projections of the timetable for high-Tc product development, based on the combined forecasts of the leading U.S. superconductivity experts. The FTS panel of experts on high-Tc superconductor applications, representing both business and research, forecast the commercialization and economic impact for 28 classes of electronic, magnetic, communications, instrumentation, transportation, industrial, and power generation products. In most cases, forecasts predict the occurrence of developments within a 90% statistical confidence limit of 2-to-3 years. The report provides background information on the 28 application areas, as well as other information useful for strategic planners. The panel also forecast high-Tc research spending, markets, and international competitiveness, and provide insight into how the industry will evolve

  12. Homogeneización de materiales compuestos de inclusiones elipsoidales periódicas

    Directory of Open Access Journals (Sweden)

    H. Hernández Cabanas

    2015-01-01

    Full Text Available Los materiales compuestos son de vital importancia para el ser humano desde sus primeros tiempos, en la actualidad el empleo de estos materiales ha proliferado en la industria debido a la presencia de propiedades físicas que no están presentes en ninguno de sus componentes. El hecho de conocer previamente las propiedades de los materiales compuestos es unos de los problemas a los que se enfrenta la ciencia. Los métodos de homogeneización se emplean para calcular las propiedades efectivas de materiales compuestos. En el presente trabajo se plantea la formulación del método de homogeneización asintótica para compuestos tridimensionales y la transformación de los problemas locales a partir de las simetrías presentes en un compuesto de inclusiones elipsoidales periódicas. Se formula la resolución de los problemas locales por el método de elementos finitos utilizando elementos tetraédricos de cuatro nodos en la discretización del problema. Se realizan los cálculos numéricos para la obtención de los coeficientes efectivos en un material de inclusiones elipsoidales periódicas de aluminio embebidas en una matriz. La matriz es a su vez un compuesto del mismo aluminio con inclusiones esféricas de carburo de silicio con distribución cuadrada. Se muestran algunos de los resultados obtenidos para este compuesto variando la fracción volumétrica de aluminio para distintas razones de aspecto de las inclusiones elipsoidales. Se observa que en el caso de constituyentes isotrópicos, con una geometría del compuesto que presente una dirección predominante, el material resultante pierde esta propiedad.

  13. Determination of Tc-99 in radioactive wastes

    International Nuclear Information System (INIS)

    Rivera S, A. A.

    2015-01-01

    Tc-99 is a fission product and one of the most important radionuclides from the view point of safety assessment for the disposal of radioactive waste because of its long half-life (2.1 x 10 5 years) and high mobility in soil-water systems, if this is released into the environment in significant quantities can concentrate on plants and animals. Tc-99 is a pure beta emitter with a maximum energy of 292 KeV, so their quantification imposes destructive methods to be analyzed by liquid scintillation. Therefore the quantification of Tc-99 in ion exchange resins requires of the mineralization of these and separation of Tc-99 of other radioisotopes present in the resin. Therefore the object of this thesis is to develop a quantification method of Tc-99 content in spent exchange resins. So in order to track the behavior of technetium during digestion exchange resins and radiochemical separation, given its high volatility, in this work the 99m Tc is used. To determine the degree of mineralization of the resins, an analysis was performed by chromatography. Subsequently the method used to determine the percentage of 99m Tc aerosolized during mineralization of resin is described. After the method for the radiochemical separation of 99m Tc is presented by liquid-liquid extraction using crown ether as extractant; for this testing was performed by varying the molarity of the extractant, the ratio of solvent extractant, type of digestion of the resin and the presence of Sr-85, in order to study the behavior of 99m Tc in the presence of this radioisotope. Finally, a track beta spectra of a sample of 99m Tc eluted from a generator 99 Mo/ 99m Tc function of time was performed. (Author)

  14. Compuestos de organosilicio para almacenamiento de energía Compuestos de organosilicio para almacenamiento de energía

    Directory of Open Access Journals (Sweden)

    Adrián Peña-Hueso

    2012-02-01

    Full Text Available   Las pilas recargables de ion litio han tenido un considerable desarrollo en los últimos años y son ampliamente utilizadas en dispositivos electrónicos. Los derivados de organosilicio enlazados a unidades de etilenglicol están siendo estudiados como una opción atractiva para sustituir a los disolventes convencionales en la preparación de electrolitos, pues poseen altos puntos de inflamación, buena conductividad, baja toxicidad y buena estabilidad electroquímica. Aunado a eso, la síntesis de estos compuestos a partir de materias primas sencillas y económicas los convierte en buenos candidatos para su uso en pilas de ion litio a nivel comercial. En este artículo se hace una revisión de los aspectos más sobresalientes del trabajo con electrolitos de organosilanos que ha realizado el Dr. Robert West.There has been a large development of Li-ion batteries during last years and they are widely used in consumer electronic devices. Organosilicon compounds coupled to ethylene glycol chains are being studied as a good option to substitute conventional solvents in the preparation of electrolytes, because they have high flash points, good conductivities, low toxicity and good electrochemical stability. These compounds are prepared from simple and cheap reagents, which also makes them attractive for their industrial application in Li-ion batteries. This paper is a review of the most important results obtained by Professor Robert West in the field of organosilicon electrolytes.

  15. CARACTERIZACIÓN DE LOS COMPUESTOS VOLÁTILES ACTIVOS OLFATIVAMENTE EN UCHUVA (Physalis peruviana L.

    Directory of Open Access Journals (Sweden)

    Doris Gutierrez

    2011-01-01

    Full Text Available Durante el estudio de los compuestos activos olfativamente en el aroma de la uchuva (Physalis peruviana L. se identificaron los compuestos volátiles, obtenidos por 3 técnicas, extracción líquido-líquido con pentano-diclorometano (1:1 (LL, Solvent-Assisted Flavor Evaporation (SAFE y Headspace-Microextracción en fase sólida (HS-MEFS, y se encontraron diferencias en la calidad del aroma de los extractos mediante el análisis olfatométrico. La técnica SAFE permitió obtener un extracto con un aroma muy semejante al de la fruta fresca. Los compuestos que presentaron los valores más altos de factor de dilución de aroma (FD fueron: hexanal, 3-hidroxi-2-butanona, 2-metilpropanol, 2-hidroxibutanoato de etilo, octanoato de etilo y 3-hidroxibutanoato de butilo. En el extracto LL se detectaron algunos compuestos sin actividad olfativa en la fruta; en contraste, mediante la técnica de HS-MEFS no fue posible detectar todos los compuestos activos olfativamente, principalmente los de mayor polaridad. Estos resultados muestran la utilidad del nuevo enfoque de análisis en química de aromas, el cual le da más relevancia al análisis olfativo en estos estudios.

  16. Influence of the Ti concentration and of the Ti:Mo molar ratio, in the efficiency of the 99 Mo - 99m Tc generator, at basis of gels of titanium molybdates

    International Nuclear Information System (INIS)

    Cortes R, O.; Monroy G, F.; Martinez C, T.

    2003-01-01

    The 99m Tc, continues being the radionuclide more used in nuclear medicine to world scale. The production of this radioisotope, is carried out by means of generators 99 Mo/ 99m Tc that get ready commercially with 99 Mo of high specific activity, adsorbed in alumina (2 mg 99 Mo/g alumina) and that they are elutriated every 23 hours. In an alternative way, it is intended to use gels of titanium molybdates, as matrices of this generators. The gels are synthesized starting from solutions of ammonium molybdates and of titanium tetrachloride in aqueous media. These gels allow to incorporate until 25% of molybdenum in their structure, being been able to use 99 Mo of low specific activity that can be obtained starting from the reaction 98 Mo (n, γ) 99 Mo. With the object of producing generators of medium activity, with the base of gels of titanium molybdates, intends in this work, to study the influence of two synthesis parameters of these gels: the concentration of the titanium solutions and the molar ratio Ti: Mo. The decrease of the concentration of the titanium solution, used during the synthesis of the gels, is converted in an efficiency decrease and radionuclide purity of the generators, as well as an increment so much of the volume of elutriation, as of the pH of the elutriates. The gels that contain an major number of titanium moles, regarding the molybdenum moles, present a greater radionuclide purity, but they diminish their efficiency. The best characteristics for the gels synthesis of titanium molybdates are: a molar ratio 1:1 for Ti and Mo, and to use solutions of titanium whose concentration is near at 1 M. (Author)

  17. Estudio de la fractura de materiales compuestos por una matriz de plástico

    OpenAIRE

    Maspoch, M. Ll. (Maria Lluïsa)

    1992-01-01

    Se estudia el comportamiento a fractura de materiales, compuestos por una matriz de plástico en la que se ha dispersado una segunda fase en forma de partículas elastoméricas. Como matriz se han utilizado dos materiales diferentes: una resina de poliéster insaturada y poliestireno. Se estudia la morfología de los materiales compuestos preparados, se determinan los parámetros de fractura y otras propiedades mecánicas, se realiza el estudio fractográfico y finalmente se analizan los resultados e...

  18. El CITA realiza estudios sobre compuestos nutraceúticos en pimiento y cebolla

    OpenAIRE

    Area de Información, Documentación y Cultura Científica. Centro de Investigación y Tecnología Agroalimentaria de Aragón

    2013-01-01

    Se está trabajando en la detección de compuestos nutracéuticos ( sustancias de origen biológico beneficiosas para la salud) en pimiento y cebolla y que son potencialmente muy útiles para el sector farmacéutico. El Centro de Investigación y Tecnología Agroalimentaria de Aragón, organismo perteneciente al Departamento de Industria e Innovación, está desarrollando técnicas analíticas y moleculares para el estudio de compuestos nutraceúticos en pimiento y cebolla. La investigación esta ...

  19. Eliminación de compuestos volátiles olorosos por electrocoagulación

    OpenAIRE

    Mariz Medeiros, Djalma; Hernández Muñoz, Aurelio; Hernández Lehmann, Aurelio; Lucas Filho, Manoel

    2011-01-01

    La emisión de olores en las depuradoras de aguas residuales representa un impacto significativo. En este sentido, resulta de especial interés la electrocoagulación, como procedimiento de tratamiento de compuestos olorosos presentes en aguas residuales. Durante la presente investigación se ha estudiado la eliminación de los siguientes compuestos volátiles olorosos mediante el proceso de electrocoagulación: sulfuro de carbono, tolueno y diclorometano. Se ha investigado el efecto del diseño del...

  20. Material compuesto electroconductor con coeficiente de expansión térmica controlado

    OpenAIRE

    Borrell, Amparo; García Moreno, Olga; Fernández, Adolfo; Torrecillas, Ramón

    2009-01-01

    Material compuesto electroconductor con coeficiente de expansión térmica controlado. La presente invención se refiere a un material compuesto que comprende un componente cerámico, caracterizado por tener un coeficiente de expansión térmico negativo, y nanofilamentos de carbono, a su procedimiento de obtención y a sus usos como electroconductor en microelectrónica, óptica de precisión, aeronáutica y aeroespacial.

  1. Comportamiento [del] tanque de material compuesto ante cargas dinámicas

    OpenAIRE

    Artero Guerrero, José Alfonso

    2010-01-01

    Este proyecto fin de carrera analiza los impactos de fragmento a alta velocidad sobre estructuras de material compuesto que contienen líquidos. En este proyecto se estudia la vulnerabilidad de la estructura cuando está fabricada en material compuesto. Las excelentes propiedades que tienen los plásticos reforzados de fibras de carbono en cuanto a baja densidad y alta resistencia mecánica los sitúan en una situación clave para desarrollarse como material estructural en fabricación de aviones. E...

  2. Determination of Tc-99 in radioactive wastes; Determinacion de Tc-99 en desechos radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Rivera S, A. A.

    2015-07-01

    Tc-99 is a fission product and one of the most important radionuclides from the view point of safety assessment for the disposal of radioactive waste because of its long half-life (2.1 x 10{sup 5} years) and high mobility in soil-water systems, if this is released into the environment in significant quantities can concentrate on plants and animals. Tc-99 is a pure beta emitter with a maximum energy of 292 KeV, so their quantification imposes destructive methods to be analyzed by liquid scintillation. Therefore the quantification of Tc-99 in ion exchange resins requires of the mineralization of these and separation of Tc-99 of other radioisotopes present in the resin. Therefore the object of this thesis is to develop a quantification method of Tc-99 content in spent exchange resins. So in order to track the behavior of technetium during digestion exchange resins and radiochemical separation, given its high volatility, in this work the {sup 99m}Tc is used. To determine the degree of mineralization of the resins, an analysis was performed by chromatography. Subsequently the method used to determine the percentage of {sup 99m}Tc aerosolized during mineralization of resin is described. After the method for the radiochemical separation of {sup 99m}Tc is presented by liquid-liquid extraction using crown ether as extractant; for this testing was performed by varying the molarity of the extractant, the ratio of solvent extractant, type of digestion of the resin and the presence of Sr-85, in order to study the behavior of {sup 99m}Tc in the presence of this radioisotope. Finally, a track beta spectra of a sample of {sup 99m}Tc eluted from a generator {sup 99}Mo/{sup 99m}Tc function of time was performed. (Author)

  3. Evaluación de rendimiento de compuestos de ajo tipo Taiwán Evaluación de rendimiento de compuestos de ajo tipo Taiwán

    Directory of Open Access Journals (Sweden)

    Briseida Mendoza Celedón

    2012-02-01

    Full Text Available Se evaluó el rendimiento y variables de calidad de compuestos de ajo (Allium sativum L., durante el ciclo otoño-invierno 2008-2009, en San Luis de la Paz, Gto., México. Se emplearon compuestos de ajo del tipo Taiwán, con resultados variables de acuerdo a su genotipo. Entre los compuestos sobresalieron por su altura de planta, rendimiento de bulbo, mayor peso promedio de bulbo y menor número de dientes por bulbo los siguientes: el Compuesto 4 (El pato, bodegas, Salamanca, Gto., el Compuesto 5 (Santa Teresa, tabla III, Salamanca, Gto., y el Compuesto 1 (Ajo sano, varias regiones del Edo. de Gto.. Es importante continuar con el programa de mejoramiento genético de ajo para el estado de Guanajuato, basado en selección de nuevas líneas de entre los compuestos mejores y con ayuda de técnicas como la eliminación de virus, para mejorar rendimiento y calidad del ajo. Field yield and bulb quality of garlic (Allium sativum L. compounds were evaluated during the 2008-2009 fall-winter cycle at the San Luis de la Paz, Gto., Mexico. Taiwan compounds were evaluated with variable results, depending on the genotype. Best plant height, bulb yield, higher weight per bulb and smaller clove number per bulb were obtained with: Compuesto 4 (El pato, bodegas, Salamanca, Gto., Compuesto 5 (Santa Teresa, tabla III, Salamanca, Gto., and Compuesto 1 (Ajo sano, varias regiones del Edo. de Gto.. It is important to continue with the program of garlic genetic breeding to Guanajuato state, based on selection of new garlic lines derived from the best compounds and using techniques as the virus elimination for improving yield and quality.

  4. Análisis de compuestos volátiles en cilantro ( L. Análisis de compuestos volátiles en cilantro (Coriandrum sativum L.

    Directory of Open Access Journals (Sweden)

    Tábata Rosales-Reyes

    2012-02-01

    Full Text Available In the present study, volatile compounds were recovered from the fresh leaves and stems ofcilantro (Coriandrum sativum L. by two methods: Liquid-Solid Extraction (LSE and SimultaneousDistillation-Extraction (SDE. The identification and quantification was done byGas Chromatography-Mass Spectrometry (GC-MS. Fourteen compounds were characterizedby LSE and GC-MS; whereas by SDE and GC-MS, they were twenty three compounds.The statistical analysis revealed significant quantitative differences (p ≤ 0,05 between theanalyzed techniques (LSE and SDE. In this work, the Simultaneous Distillation-Extractionshowed the greater identification and total concentration of volatile compounds. Aldehydes,monoterpenes, and alcohols comprised 78% of the volatile found for two methods, the restwere hydrocarbons. (E-2-decenal was the most abundant compound in cilantro in bothextraction techniques. En el presente estudio se recuperaron los compuestos volátiles de las hojas y los tallos frescos de cilantro (Coriandrum sativum L. mediante dos métodos: Extracción Sólido Líquido (LSE y Extracción-Destilación Simultánea (SDE. La identificación y cuantificación fue por Cromatografía de Gases-Espectrometría de Masas (GC-MS. Se caracterizaron catorce compuestos por LSE y GC-MS; mientras que por SDE y GC-MS, fueron veintitrés compuestos. El análisis estadístico reveló significativas diferencias cuantitativas (p ≤ 0,05 entre las técnicas analizadas (LSE y SDE. En este trabajo, la Extracción-Destilación Simultánea arrojó la mayor identificación y concentración total de compuestos volátiles. Los aldehídos, monoterpenos y alcoholes comprendieron el 78% de los volátiles encontrados por los dos métodos, el resto fueron hidrocarburos. En ambas técnicas de extracción el (E-2-decenal fue el compuesto más abundante en el cilantro.

  5. MATERIALES COMPUESTOS DE MATRIZ POLIMÉRICA USADOS PARA EL BLINDAJE DE INTERFERENCIA ELECTROMAGNÉTICA

    Directory of Open Access Journals (Sweden)

    Andrés Orlando Garzón Posada

    2017-01-01

    Full Text Available Este trabajo tiene como propósito revisar el estado del arte en la síntesis y caracterización de materiales de matriz polimérica reforzados con compuestos a base de carbón o ferritas para su uso como materiales atenuadores de interferencia electromagnética (EMI. Recientemente, este tipo de materiales han sido objeto de investigación debido a sus potenciales aplicaciones tecnológicas, economía y de ser además ambientalmente amigables, puesto que polímeros o cauchos reciclados se pueden utilizar para su fabricación. Estos compuestos pueden ser empleados en la producción de blindajes electromagnéticos, transductores, entrega focalizada de medicamentos, marcación de órganos, hipertermia magnética, etc. Para la fabricación de este tipo de materiales compuestos se usan refuerzos particulados, fibras o láminas y como matrices polímeros termoplásticos o termoestables, cauchos sintéticos o naturales. El método de producción de los compuestos (mezcla fundida, métodos químicos, etc. influye en las propiedades eléctricas, magnéticas y electromagnéticas del material obtenido, debido a la relación de aspecto de los refuerzos: compuestos con elevada relación de aspecto de sus refuerzos tendrán mejores propiedades magnéticas, eléctricas y desempeño frente a la interferencia electromagnética. El blindaje electromagnético de estos materiales se cuantifica a través de la efectividad del blindaje (SE o en otros casos a través de la pérdida reflectiva (RL. Una efectividad de blindaje de 30 dB corresponde a 99,9% de atenuación de la radiación electromagnética incidente. En todos los trabajos se comprueba que las propiedades del compuesto dependen de la cantidad y del tipo de refuerzo adicionado a la matriz.

  6. Study of the radiation effect of "9"9Mo/"9"9"mTc generator on Bacillus subtilis and Bacillus pumilus species

    International Nuclear Information System (INIS)

    Fukumori, Neuza T.O.; Endo, Erica M.M.; Felgueiras, Carlos F.; Matsuda, Margareth M.N.; Osso Junior, João A.

    2016-01-01

    In this work, molybdenum-99 loaded columns were challenged with Bacillus subtilis vegetative cells and Bacillus pumilus spores inside and outside the alumina column, and microbial recovery and radiation effect were assessed. Alumina was a barrier for the passage of microorganisms regardless the species, whilst spores were more retained than vegetative cells with a lower microbial recovery, without significant differences between 9.25 and 74 GBq generators. Bacillus pumilus biological indicator showed lower recoveries, suggesting a radiation inactivating effect on microorganisms. - Highlights: • Microorganisms in radionuclide generator may impair the quality of the product. • Killing of Bacillus pumilus was not complete even after 20 days of exposition. • Alumina column was a physical barrier for the microbial recovery. • An alternative biological indicator based on B. pumilus spores is proposed.

  7. Caracterización de los compuestos del aroma en rones colombianos por HS-SPME-GC-MS-O

    Directory of Open Access Journals (Sweden)

    Jazmín Osorio Monsalve

    2016-11-01

    Full Text Available Se identificaron por primera vez 46 compuestos volátiles olfativamente activos con actividad aromática significativa presentes en rones comerciales de Colombia. Lo anterior, mediante microextracción en fase sólida en modo espacio de cabeza (HS-SPME, acoplada a cromatografía de gases con detectores de espectrometría de masas y olfatometría (GC-MS-O. Dentro de los compuestos identificados se encuentran ésteres, compuestos aromáticos, alcoholes, acetales, lactonas y furfural. De esos 46 compuestos, nueve están presentes en todos los rones estudiados y algunos otros son característicos solo de la marca.

  8. Desarrollo de materiales compuestos avanzados basados en fibras de carbono para la industria aeroespacial

    OpenAIRE

    Rodriguez, Exequiel Santos

    2015-01-01

    En este trabajo se estudia el desarrollo de materiales compuestos de matriz polimérica reforzados con fibras de carbono para aplicaciones que presentan solicitaciones severas. Este es el caso de la industria aeroespacial, que utiliza componentes en cohetes y aeronaves que se ven sometidos a altas solicitaciones mecánicas y están expuestos a las altas temperaturas. Es por ello que se estudiaron materiales para diversas aplicaciones basados en fibras de carbono: preimpregnados de fibras y resin...

  9. In-house cyclotron production of high-purity Tc-99m and Tc-99m radiopharmaceuticals.

    Science.gov (United States)

    Martini, Petra; Boschi, Alessandra; Cicoria, Gianfranco; Zagni, Federico; Corazza, Andrea; Uccelli, Licia; Pasquali, Micòl; Pupillo, Gaia; Marengo, Mario; Loriggiola, Massimo; Skliarova, Hanna; Mou, Liliana; Cisternino, Sara; Carturan, Sara; Melendez-Alafort, Laura; Uzunov, Nikolay M; Bello, Michele; Alvarez, Carlos Rossi; Esposito, Juan; Duatti, Adriano

    2018-05-30

    In the last years, the technology for producing the important medical radionuclide technetium-99m by cyclotrons has become sufficiently mature to justify its introduction as an alternative source of the starting precursor [ 99m Tc][TcO 4 ] - ubiquitously employed for the production of 99m Tc-radiopharmaceuticals in hospitals. These technologies make use almost exclusively of the nuclear reaction 100 Mo(p,2n) 99m Tc that allows direct production of Tc-99m. In this study, it is conjectured that this alternative production route will not replace the current supply chain based on the distribution of 99 Mo/ 99m Tc generators, but could become a convenient emergency source of Tc-99m only for in-house hospitals equipped with a conventional, low-energy, medical cyclotron. On this ground, an outline of the essential steps that should be implemented for setting up a hospital radiopharmacy aimed at the occasional production of Tc-99m by a small cyclotron is discussed. These include (1) target production, (2) irradiation conditions, (3) separation/purification procedures, (4) terminal sterilization, (5) quality control, and (6) Mo-100 recovery. To address these issues, a comprehensive technology for cyclotron-production of Tc-99m, developed at the Legnaro National Laboratories of the Italian National Institute of Nuclear Physics (LNL-INFN), will be used as a reference example. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. Evolution of 99Tc Species in Cementitious Nuclear Waste Form

    International Nuclear Information System (INIS)

    Um, Woo Yong; Westsik, Joseph H.

    2011-01-01

    Technetium (Tc) is produced in large quantities as a fission product during the irradiation of 235 U-enriched fuel for commercial power production and plutonium genesis for nuclear weapons. The most abundant isotope of Tc present in the wastes is 99 Tc because of its high fission yield (∼6%) and long half-life (2.13x10 5 years). During the Cold War era, generation of fissile 239 Pu for use in America's atomic weapons arsenal yielded nearly 1900 kg of 99 Tc at the U.S. Department of Energy's (DOE) Hanford Site in southeastern Washington State. Most of this 99 Tc is present in fuel reprocessing wastes temporarily stored in underground tanks awaiting retrieval and permanent disposal. After the wastes are retrieved from the storage tanks, the bulk of the high-level waste (HLW) and lowactivity waste (LAW) stream is scheduled to be converted into a borosilicate glass waste form that will be disposed of in a shallow burial facility called the Integrated Disposal Facility (IDF) at the Hanford Site. Even with careful engineering controls, volatilization of a fraction of Tc during the vitrification of both radioactive waste streams is expected. Although this volatilized Tc can be captured in melter off-gas scrubbers and returned to the melter, some of the Tc is expected to become part of the secondary waste stream from the vitrification process. The off-gas scrubbers downstream from the melters will generate a high pH, sodium-ammonium carbonate solution containing the volatilized Tc and other fugitive species. Effective and cost-efficient disposal of Tc found in the off-gas scrubber solution remains difficult. A cementitious waste form (Cast Stone) is one of the nuclear waste form candidates being considered to solidify the secondary radioactive liquid waste that will be generated by the operation of the waste treatment plant (WTP) at the Hanford Site. Because Tc leachability from the waste form is closely related with Tc speciation or oxidation state in both the simulant

  11. Influence of the Ti concentration and of the Ti:Mo molar ratio, in the efficiency of the {sup 99} Mo - {sup 99m} Tc generator, at basis of gels of titanium molybdates; Influencia de la concentracion de Ti y de la relacion molar Ti:Mo, en la eficiencia del generador {sup 99} Mo - {sup 99m} Tc a base de geles de molibdatos de titanio

    Energy Technology Data Exchange (ETDEWEB)

    Cortes R, O.; Monroy G, F.; Martinez C, T. [Facultad de Quimica, UNAM, 04510 Mexico D.F. (Mexico)]. e-mail: ocielcr@hotmail.com

    2003-07-01

    The {sup 99m} Tc, continues being the radionuclide more used in nuclear medicine to world scale. The production of this radioisotope, is carried out by means of generators {sup 99} Mo/{sup 99m} Tc that get ready commercially with {sup 99} Mo of high specific activity, adsorbed in alumina (2 mg {sup 99} Mo/g alumina) and that they are elutriated every 23 hours. In an alternative way, it is intended to use gels of titanium molybdates, as matrices of this generators. The gels are synthesized starting from solutions of ammonium molybdates and of titanium tetrachloride in aqueous media. These gels allow to incorporate until 25% of molybdenum in their structure, being been able to use {sup 99} Mo of low specific activity that can be obtained starting from the reaction {sup 98} Mo (n, {gamma}) {sup 99} Mo. With the object of producing generators of medium activity, with the base of gels of titanium molybdates, intends in this work, to study the influence of two synthesis parameters of these gels: the concentration of the titanium solutions and the molar ratio Ti: Mo. The decrease of the concentration of the titanium solution, used during the synthesis of the gels, is converted in an efficiency decrease and radionuclide purity of the generators, as well as an increment so much of the volume of elutriation, as of the pH of the elutriates. The gels that contain an major number of titanium moles, regarding the molybdenum moles, present a greater radionuclide purity, but they diminish their efficiency. The best characteristics for the gels synthesis of titanium molybdates are: a molar ratio 1:1 for Ti and Mo, and to use solutions of titanium whose concentration is near at 1 M. (Author)

  12. Modelos de elementos finitos de componentes de autobuses fabricados en materiales compuestos

    OpenAIRE

    Grimaldi Pastoril, Rocío; Alcalá Fazio, Enrique

    2010-01-01

    La creciente preocupación por la seguridad en el transporte de pasajeros, ha hecho que las estructuras de los autobuses y autocares se vean sometidas a solicitaciones cada vez más exigentes, sobre todo ante condiciones de vuelco cuyos requerimientos vienen determinados por el Reglamento 66 de ginebra. Es por eso que en esta ponencia se pretende presentar una alternativa de pilares de estructura con materiales compuestos para el uso de los mismos como método reductor de masa de los vehícu...

  13. Extracción de compuestos aromáticos con furfural en aceites lubricantes recuperados

    OpenAIRE

    Meléndez Hernández, Marianna Andrea

    2015-01-01

    Se presenta un estudio experimental y diseño conceptual con especificación de equipos y análisis económico de un proceso de extracción con furfural de compuestos aromáticos presentes en la base lubricante recuperada, para su decoloración y desodorización, después del proceso de regeneración de aceites usados en la empresa Biochemical Group -- Se realiza un diseño de experimentos factorial 32 para evaluar el proceso determinando la composición de hidrocarburos aromáticos en el extracto y refin...

  14. COMPUESTOS DE HIERRO PARA SUPLEMENTACIÓN ORAL: PRINCIPIOS Y AVANCES -REVISIÓN SISTEMATICA

    OpenAIRE

    PEREZ M, Lina J.; TOBÓN, Gloria

    2006-01-01

    Se presenta una revisión que abarca los principales aspectos sobre la absorción oral del hierro (fuentes y captación) y sus funciones en el organismo, centrándose en la tendencia actual de utilizar complejos o quelatos de este metal con ligandos orgánicos para el tratamiento oral por deficiencia del mismo (monosacáridos, aminoácidos y ácidos carboxílicos de bajo peso molecular), ya que estos compuestos aumentan la biodisponibilidad del hierro y disminuyen los efectos adversos que presentan su...

  15. Modelización de impactos de material compuesto contra célula de carga

    OpenAIRE

    López Toledo, Álvaro

    2015-01-01

    En el presente trabajo fin de grado se han desarrollado dos modelos numéricos correspondientes a un modelo completo y otro simplificado donde se hace impactar lajas de material compuesto de dimensiones 81x42 mm2 y 2.4 mm de espesor y de secuencia de laminado (+45/-45/0/90/90/0)s. Este material está formado por doce láminas y se recrea de varias formas, introduciendo diferente cantidad de elementos cohesivos, en concreto de cero, uno y tres. Para ambos modelos se utilizan velocidades de lanzam...

  16. Caracterización del material compuesto mármol-poliéster

    OpenAIRE

    Corpas Iglesias, F. A.; Iglesias Godino, F. J.; Codina Sánchez, S.; Ruiz Román, J. M.; Ruiz Prieto, J. M.; Alonso Santos, C.

    2002-01-01

    En este trabajo, caracterizamos un nuevo material compuesto, formado con una mezcla de poliéster y de mármol blanco triturado. El propósito final es doble: por un lado obtener un material para aplicaciones lo suficientemente competitivas como para que se pueda iniciar un estudio económico de viabilidad, aumentando el rendimiento de la materia prima y mejorando las salidas laborales de las comarcas extractoras. Para la caracterización del material se ha determinado el porcentaje adecuado de...

  17. 93Tc and sup(93m)Tc gamma spectra

    International Nuclear Information System (INIS)

    Podkopaev, Yu.N.; Zarubin, P.P.; Kobelev, V.F.; Padalko, V.Yu.; Khrisanfov, Yu.V.

    1977-01-01

    The sup(93,93m)Tc decay was studied. The spectra of γ-rays accompanying the decay of this nuclide were studied. 93 Tc and sup(93m)Tc were obtained in the (dn)-reaction on 92 Mo. To ensure a more reliable identification of γ-rays, the isotopic composition of the targets, the bombardment time, the energy of the bombarding deuterons (5-12 MeV) and the spectrum processing program were varied. The energies and relative intensities of the γ-rays of the 93 Tc and sup(93m)Tc decay are listed in tables together with data of other investigatxons. The results obtained largely confirm the known data. Four new transitions were added in the sup(93m)Tc spectrum namely 1046.8, 2011.8, 2182.0, and 2861.5 keV. The 2739.0 keV transition was eliminated from the 93 Tc spectrum. The appropriate changes and additions were made in the 93 Tc decay scheme, and three new levels were introduced: 2479.0, 2821.7, and 3025.8 keV. The values of log ft of some levels of 93 Tc were estimated

  18. Sup(99m)Tc compounds for diagnostic purposes

    International Nuclear Information System (INIS)

    Cifka, J.; Budsky, F.

    1980-01-01

    The applications of sup(99m)Tc in nuclear medicine are discussed, such as sodium pertechnetate in thyroid and brain scintigraphy, complex compounds in lungs and liver diao.nosis. Technetium generators are classified according to the method of separating sup(99m)Tc from 99 Mo. Adsorption generators are used, molybdate-99 is adsorbed on an Al 2 O 3 -packed column while pertechnetate-99m is eluted with 0.9% NaCl solution. Also used is continuous pertechnetate-99m extraction with methyl ethyl ketone from 0.5 M potassium molybdate and 2.5 M of potassium carbonate. The manufacture is described of kits for sup(99m)Tc radiopharmaceuticals preparation, eg., Diagos I, a gluconate complex, a lyophilisate for sup(99m)Tc-sodium pyrophosphate injections, a diagnostic kit for lung scintiscanning. (H.S.)

  19. Composición de Ácidos Grasos (MUFA y CLA) en Tejido Muscular de Bovino Relacionado con la Presencia del Polimorfismo g.878TC en el Gen SCD

    OpenAIRE

    Inostroza, K; Larama, G; Sepúlveda, N

    2012-01-01

    El tejido muscular de muchos animales domésticos es fuente de proteínas, grasa y minerales para los seres humanos y está compuesto por una serie de estructuras que le otorgan propiedades nutricionales y bioquímicas. En los ultimos años se ha identificado un polimorfismo de único nucleótido (SNP) en el gen SCD (g.878TC), que influye sobre la composición de ácidos grasos en los bovinos. El objetivo de este estudio fue determinar la presencia del SNP g.878TC en músculo Longissimus dorsi de bovin...

  20. The Tribolium castaneum cell line TcA: a new tool kit for cell biology.

    Science.gov (United States)

    Silver, Kristopher; Jiang, Hongbo; Fu, Jinping; Phillips, Thomas W; Beeman, Richard W; Park, Yoonseong

    2014-10-30

    The red flour beetle, Tribolium castaneum, is an agriculturally important insect pest that has been widely used as a model organism. Recently, an adherent cell line (BCIRL-TcA-CLG1 or TcA) was developed from late pupae of the red flour beetle. Next generation transcriptome sequencing of TcA cells demonstrated expression of a wide variety of genes associated with specialized functions in chitin metabolism, immune responses and cellular and systemic RNAi pathways. Accordingly, we evaluated the sensitivity of TcA cells to dsRNA to initiate an RNAi response. TcA cells were highly sensitive to minute amounts of dsRNA, with a minimum effective dose of 100 pg/mL resulting in significant suppression of gene expression. We have also developed a plasmid containing two TcA-specific promoters, the promoter from the 40S ribosomal protein subunit (TC006550) and a bi-directional heat shock promoter (TcHS70) from the intergenic space between heat shock proteins 68a and b. These promoters have been employed to provide high levels of either constitutive (TC006550) or inducible (TcHS70) gene expression of the reporter proteins. Our results show that the TcA cell line, with its sensitivity to RNAi and functional TcA-specific promoters, is an invaluable resource for studying basic molecular and physiological questions.

  1. Bebidas a base de frutas procesadas por tecnologías no térmicas: compuestos bioactivos y bioaccesibilidad

    OpenAIRE

    Carbonell Capella, Juana Mª

    2016-01-01

    La presente tesis doctoral se centró en el análisis de compuestos bioactivos y parámetros de calidad en bebidas a base de zumos de frutas y sus modificaciones tras el procesado por tecnologías no térmicas (altas presiones hidrostáticas [APH], pulsos eléctricos de alta intensidad [PEAI], descargas eléctricas de alto voltaje [DEAV] y ultrasonidos [USN]), así como el estudio de la bioaccesibilidad de estos compuestos. La aplicación conjunta de dos estrategias de conservación (aplicación de tecno...

  2. Caracterización preliminar de los compuestos hidrofóbicos removidos de Andisoles repelentes al agua de Antioquia.

    Directory of Open Access Journals (Sweden)

    Jaramillo J. Daniel F.

    2000-06-01

    Full Text Available En 15 muestras de Andisoles repelentes al agua se caracterizaron los compuestos orgánicos extraídos por mezclas de etanol - benceno, 1:2 y de isopropanol - amoniaco 7:3; se confirmó que los compuestos responsables de la hidrofobicidad del suelo extraídos son poco humificados, tienen una composición general de ácidos carboxílicos alifáticos de cadenas largas y que corresponden a humus tipo Rp.

  3. Effects of FlAsH/Tetracysteine (TC) tag on PrP proteolysis and PrPres formation by TC-scanning

    Science.gov (United States)

    Taguchi, Yuzuru; Hohsfield, Lindsay A.; Hollister, Jason R.

    2014-01-01

    The FlAsH/tetracysteine (FlAsH/TC) tag is a powerful tool for fluorescent labeling of proteins. However, even small tags such as FlAsH/TC could alter the behavior of the tagged proteins, especially if the insertion occurs at internal sites. Defining the influence of FlAsH/TC on nearby protein-protein interactions might aid in selecting appropriate positions for internal TC insertions and allow the exploitation of serial FlAsH/TC insertions (TC-scanning) as a probe to characterize sites of protein-protein interaction. To explore this application in the context of substrate-protease interactions, we analyzed the effect of FlAsH/TC insertions on proteolysis of cellular prion protein (PrPsen) in in vitro reactions and generation of the C1 metabolic fragment of PrPsen in live neuroblastoma cells. The influence of FlAsH/TC insertion was evaluated by TC-scanning across the cleavage sites of each protease. The results showed that FlAsH/TC inhibited protease cleavage only within limited ranges of the cleavage sites that varied from about 1 to 6 residues-wide depending on the protease, providing an estimate of the PrP residues interacting with each protease. TC-scanning was also used to probe a different type of protein-protein interaction, the conformational conversion of FlAsH-PrPsen to the prion disease-associated isoform, PrPres. PrP constructs with FlAsH/TC insertions at residues 90–96 but not 97–101 were converted to FlAsH-PrPres, identifying a boundary separating loosely versus compactly folded regions of PrPres. Our observations demonstrate that TC-scanning with the FlAsH/TC tag can be a versatile method for probing protein-protein interactions and folding processes. PMID:23943295

  4. Impeding 99Tc(IV) mobility in novel waste forms

    Science.gov (United States)

    Lee, Mal-Soon; Um, Wooyong; Wang, Guohui; Kruger, Albert A.; Lukens, Wayne W.; Rousseau, Roger; Glezakou, Vassiliki-Alexandra

    2016-01-01

    Technetium (99Tc) is an abundant, long-lived radioactive fission product whose mobility in the subsurface is largely governed by its oxidation state. Tc immobilization is crucial for radioactive waste management and environmental remediation. Tc(IV) incorporation in spinels has been proposed as a novel method to increase Tc retention in glass waste forms during vitrification. However, experiments under high-temperature and oxic conditions show reoxidation of Tc(IV) to volatile pertechnetate, Tc(VII). Here we examine this problem with ab initio molecular dynamics simulations and propose that, at elevated temperatures, doping with first row transition metal can significantly enhance Tc retention in magnetite in the order Co>Zn>Ni. Experiments with doped spinels at 700 °C provide quantitative confirmation of the theoretical predictions in the same order. This work highlights the power of modern, state-of-the-art simulations to provide essential insights and generate theory-inspired design criteria of complex materials at elevated temperatures. PMID:27357121

  5. INFLUENCE OF NATURAL AND SYNTHETIC ORGANIC LIGANDS ON THE STABILITY AND MOBILITY OF REDUCED TC(IV)

    Energy Technology Data Exchange (ETDEWEB)

    Nathalie A. Wall; Baohua Gu

    2012-12-20

    The primary objectives were (1) to quantify the interactions of organic ligands with Tc(IV) through the generation of thermodynamic (complexation) and kinetic parameters needed to assess and predict the mobility of reduced Tc(IV) at DOE contaminated sites; and (2) to determine the impact of organic ligands on the mobility and fate of reduced Tc(IV) under field geochemical conditions.

  6. The method of activity determination of Tc-99m in ionization chamber

    International Nuclear Information System (INIS)

    Broda, R.

    1980-01-01

    The paper presents a method of finding the efficiency of sup(99m)Tc activity measurements in the ionization chamber, basing on 99 Mo activity measurements and the activity ratio of sup(99m)Tc to 99 Mo in 99 Mo + sup(99m)Tc solution. The activity of 99 Mo has been determined in 4πβ-γ coincidence system with liquid scintillator in β channel by means of the absolute method of two-stage coincidence. The activity ratio of sup(99m)Tc to 99 Mo has been determined by means of spectrometric method. The 99 Mo and sup(99m)Tc activities have been measured in 99 Mo + sup(99m)Tc generators, and the activity of sup(99m)Tc solution after elution has been measured. It has been shown that sup(99m)Tc activity, determined by means of the chamber method on the basis of the efficiency found, corresponds to the activity determined by means of spectrometric method, and that sup(99m)Tc activity, measured in generator before elution, is equal to the sum of sup(99m)Tc activity eluted and the one remained in generator. (author)

  7. Influencia del envejecimiento higrotérmico en el comportamiento a fractura de compuestos de matriz termoplástica

    Directory of Open Access Journals (Sweden)

    Zenasni, R.

    2004-04-01

    Full Text Available Aging was carried out by introducing the materials into a climatic chamber under appropriate conditions of temperature, humidity and time. The materials are made of two types of weaving (2/2 Twill, 8H Satin glass fibre, and (8H Satin carbon fibre. The matrix was polyetherimide(PEI. In order to characterize the interlaminar fracture a mechanical test was carried out using the mode I Double Cantilever Beam (DCB and mode II End Notched Fixed (ENF tests. The analysis consists of knowing the different failure mechanisms which have generated the hygrothermal aging.

    En este trabajo se realiza un estudio sobre la influencia del envejecimiento higrotérmico en el comportamiento a fractura interlaminar de tres tipos de compuestos, dos de ellos reforzados con tejido de fibra de vidrio(2/2 Twill, y 8H Satin y otro con fibra de carbono (8H Satin . El envejecimiento se realizó manteniendo, durante diferentes periodos de tiempo, probetas en una cámara climática bajo unas determinadas condiciones de temperatura y humedad relativa. La determinación de la tenacidad a fractura interlaminar se realizó utilizando probetas de modos I (DCB y II (ENF. El análisis realizado consistió en poner de manifiesto los diferentes mecanismos de rotura a fractura que se generan tras someter las probetas a la exposición higrotérmica. De los resultados de los ensayos se concluye un diferente comportamiento a fractura según el refuerzo existente y también a igual refuerzo, según la trama del tejido.

  8. Preparation of 99 sup(m)Tc labeled fibrinogen

    International Nuclear Information System (INIS)

    Almeida, M.A.T.M. de; Silva, C.P.G. da.

    1984-01-01

    A simple method for the preparation of 99 sup(m) TC labelled Fibrinogen using stannous chloride as reducing agent of 99 sup(m) TcO- 4 ion is presented. A sample of 20 mg of Fibrinogen is dissolved in 2 ml of buffer carbonate (pH=8) and 0.3 ml stannous chloride 0.2% is added. A sterile solution of sodium pertechnetate 99 sup(m) Tc eluted from a Mo-Tc generator is immediately added. The mixture rests for 30 minutes and after this period, the obtained yield is about 70%. The lyophilized kits also presented a yield of 70%, being therefore suitable for medical applications. (Author) [pt

  9. Efecto citotóxico de algunos compuestos naturales aislados de plantas Laureaceae y derivados sintéticos

    Directory of Open Access Journals (Sweden)

    Luis Enrique Cuca

    2011-03-01

    Conclusión. Los compuestos evaluados que exhibieron actividad contra la proliferación celular mostraron resultados interesantes, lo cual sugiere su potencial uso como cabezas de serie o moléculas plantilla en el desarrollo de agentes anticancerígenos.

  10. Compuestos sintéticos del tipo de estirilquinolinas con actividades leishmanicida y citotóxica

    Directory of Open Access Journals (Sweden)

    Emy Luz Sánchez

    2014-12-01

    Conclusión. A pesar de su toxicidad, el compuesto E3 de la 2-estirilquinolina demostró una actividad prometedora contra L. (V. panamensis, pues fue capaz de inhibir de manera significativa los amastigotes en el interior de la célula y de reducir la infección.

  11. Compuestos de Paladio soportados en distintos materiales. Aplicación en Catálisis heterogénea

    OpenAIRE

    Leyva Perez, Antonio

    2011-01-01

    Leyva Perez, A. (2005). Compuestos de Paladio soportados en distintos materiales. Aplicación en Catálisis heterogénea [Tesis doctoral no publicada]. Universitat Politècnica de València. doi:10.4995/Thesis/10251/1839.

  12. Desarrollo de prótesis ortopédicas en materiales compuestos para uso competitivo

    OpenAIRE

    Villar, Juan Ignacio; Fontana, Marco; Sznajderman, Lucas; Antokoletz, Sebastián Pablo

    2017-01-01

    El trabajo describe el diseño, construcción y posterior validación de una prótesis transtibial de uso competitivo destinada a carreras de velocidad. La misma es concebida en materiales compuestos y las bases del diseño contemplan la medición de parámetros biomecánicos del usuario para un posterior análisis de similaridad. Las principales características que se pretende lograr de una prótesis tipo ‘Flex- Foot’ son la respuesta elástica lineal, tamaño y proporción apropiada, frecuencia natur...

  13. Comportamiento dieléctrico de compuestos epoxi/aluminio/BaTiO3

    Directory of Open Access Journals (Sweden)

    Castro, M. S.

    2009-06-01

    Full Text Available In order to improve the dielectric behaviour of epoxi/BaTiO3, in this work the influence of micrometric aluminum metal flakes (Al, on the dielectric properties of epoxy / BaTiO3 composites was studied. Epoxy resin, Al and BaTiO3 were mixed using an ultrasonic mixer and composites were deposited onto glass substrates by dipping technique. Obtained materials presented good dielectric properties at room temperature, and relaxation process appeared due to the resin behaviour. Obtained results were compared with those reported in literature for similar systems.Con el objetivo de mejorar el comportamiento dieléctrico de los compuestos epoxi/BaTiO3, en este trabajo se estudió la influencia de partículas metálicas de aluminio (Al, con forma de escamas y tamaño micrométrico, sobre las propiedades dieléctricas de sistemas epoxi / BaTiO3. El material compuesto fue obtenido por la técnica de inmersión o “dipping”. La mezcla de los componentes fue llevado a cabo en mezclador ultrasónica y la deposición se realizó sobre sustratos de vidrio. Los materiales obtenidos presentaron buenas propiedades dieléctricas a temperatura ambiente, sin alcanzar el límite de percolación, y los fenómenos de relajación fueron generados por los dominios de la resina. Los valores obtenidos fueron comparados con los reportados en la bibliografía para sistemas similares.

  14. Análisis de los compuestos volátiles de la ciruela amarilla (Prunus domestica L. ssp. domestica

    Directory of Open Access Journals (Sweden)

    Yineth Ruiz

    2011-01-01

    Full Text Available El aroma de las frutas se debe a los constituyentes volátiles presentes que, aunque se encuentran en muy bajas concentraciones, contribuyen al aroma global en grados muy diversos. Se hace necesario usar técnicas de aislamiento y concentración que garanticen el análisis de una composición química semejante a la de la fruta. Este trabajo tuvo como objetivo el análisis de los compuestos volátiles de la ciruela amarilla (Prunus domestica L. ssp. domestica por el método de evaporación del aroma asistida por solvente (SAFE. Este método utiliza un equipo de destilación conectado a una bomba de alto vacío que ofrece la posibilidad de aislar rápidamente compuestos volátiles sin daño térmico en diferentes matrices alimentarias. La separación e identificación de los compuestos volátiles se realizó por cromatografía de gases-espectrometría de masas (GC-MS. Se identificaron 47 compuestos (6,55 mg/kg de pulpa de fruta, entre ellos 14 alcoholes, 8 aldehídos, 7 ésteres, 5 cetonas, 4 ácidos carboxílicos, 4 hidrocarburos aromáticos, 3 lactonas, un compuesto azufrado y una hidroxicetona; 16 de ellos se informan por primera vez. El acetato de etilo (2,88 mg/kg, etanol (1 mg/kg y ácido octanoico (0,78 mg/kg fueron los constituyentes volátiles mayoritarios de esta variedad de ciruela.

  15. Análisis de los compuestos volátiles de la ciruela amarilla (Prunus domestica L. ssp. domestica

    Directory of Open Access Journals (Sweden)

    Yineth Ruiz

    2011-06-01

    Full Text Available El aroma de las frutas se debe a los constituyentes volátiles presentes que, aunque se encuentran en muy bajas concentraciones, contribuyen al aroma global en grados muy diversos. Se hace necesario usar técnicas de aislamiento y concentración que garanticen el análisis de una composición química semejante a la de la fruta. Este trabajo tuvo como objetivo el análisis de los compuestos volátiles de la ciruela amarilla (Prunus domestica L. ssp.domestica por el método de evaporación del aroma asistida por solvente (SAFE. Este método utiliza un equipo de destilación conectado a una bomba de alto vacío que ofrece la posibilidad de aislar rápidamente compuestos volátiles sin daño térmico en diferentes matrices alimentarias. La separación e identificación de los compuestos volátiles se realizó por cromatografía de gases-espectrometría de masas (GC-MS. Se identificaron 47 compuestos (6,55 mg/kg de pulpa de fruta, entre ellos 14 alcoholes, 8 aldehídos, 7 ésteres, 5 cetonas, 4 ácidos carboxílicos, 4 hidrocarburos aromáticos, 3 lactonas, un compuesto azufrado y una hidroxicetona; 16 de ellos se informan por primera vez. El acetato de etilo (2,88 mg/kg, etanol (1 mg/kg y ácido octanoico (0,78 mg/kg fueron los constituyentes volátiles mayoritarios de esta variedad de ciruela.

  16. A new method for 99mTc-labelling of proteins, leucocytes and platelets for nuclear medicine application

    International Nuclear Information System (INIS)

    Sundrehagen, E.

    1984-01-01

    A reduced state of 99mTc was obtained by concentrated hydrocloric acid treatment of the 99mTc(VII)/0.15 M NaCl eluate from 99Mo/99mTc generators. Non-acidic reduced state of 99mTc in dry NaCl deposit was obtained by vacuum evaporation of concentrated HCl and water. A monitored vacuum evaporator built for this purpose is presented, as well as methods of formation of various 99mTc-protein and 99mTc-polypeptide complexes. After careful protein precipation or anionic adsorption of pertechnetate and 99mTc-gentisic acid complexes, high radiochemical purities of labelled proteins were demonstrated by gel chromatography studies, radioimmunological methods, radioaffinity testing studies and ampholyte displacement radiochromatography. Preparative methods for 99mTc-plasmin (at pH=2), 99mTc-secretin (at pH=3) and 99mTc-IgG (at pH=4) are presented. The role and the limitations of 99mTc-plasmin for diagnosis of deep vein thrombosis were investigated in experimentally induced jugular vein thrombosis in rabbits. The in vivo distribution of intravenously injected 99mTc-secretin was found to be in correspondance with that of unlabelled secretin. Labelling of platelets and leucoytes from human blood with 99mTc was carried out at pH=7.2. Data for a remarkable high stability of the labelled cells are presented

  17. Presentation of test cases TC-2A, TC-2B, TC-2C, TC-2D - Twodimensional, incompressible, wall flows with separation

    DEFF Research Database (Denmark)

    Scheel Larsen, Poul

    1988-01-01

    The four test cases comprise the backfacing step at high Re-number (TC-2A) and low Re-number (TC-2B), a low Re-number boundary layer flow past a thin obstacle, fence-on-wall (TC-2C), and a high Re-number developed channel flow past a squareobstacle (TC-2D). Geometry, test conditions and available...

  18. Tenacidad a la fractura de compuestos cermets 3Al2O3*2SiO2/Ag manufacturados por molienda de alta energía

    OpenAIRE

    Hernández,José G. Miranda; Bustamante,Miriam Vázquez; Hernández,Héctor Herrera; Morán,Carlos O. González; Rangel,Enrique Rocha; García,Elizabeth Refugio

    2016-01-01

    La fabricación de materiales compuestos de matriz cerámica reforzados con partículas metálicas han propiciado la formación de nuevos materiales conocidos como compuestos CERMETS, materiales que debido a sus elementos precursores poseen propiedades distintas a las de los materiales convencionales. En este trabajo se establece la ruta de fabricación de materiales compuestos cermets base 3Al2O3*2SiO2 reforzados con partículas metálicas de Ag a partir de la formación de la composición química en ...

  19. Tc: chemistry and radiopharmaceuticals: a prospectus

    International Nuclear Information System (INIS)

    Tulip, T.H.

    1987-01-01

    The recent explosion in technetium chemistry evident in this symposium promises to continue unabated. As in the past, radiopharmaceutical applications will lead to new Tc chemistry. In this lecture the author will discuss those areas which appear most fertile based on chemical and radiopharmaceutical criteria. Among these will be new organometallic Tc chemistry (e.g., Tc(CNR) 6 cations), Tc complexes as metabolic tracers (e.g., Tc-analogs to FDG), and peptide-based Tc chelators (e.g., Tc-metallothionein)

  20. New Gastrin Releasing Peptide Receptor-Directed [99mTc]Demobesin 1 Mimics: Synthesis and Comparative Evaluation.

    Science.gov (United States)

    Nock, Berthold A; Charalambidis, David; Sallegger, Werner; Waser, Beatrice; Mansi, Rosalba; Nicolas, Guillaume P; Ketani, Eleni; Nikolopoulou, Anastasia; Fani, Melpomeni; Reubi, Jean-Claude; Maina, Theodosia

    2018-04-12

    We have previously reported on the gastrin releasing peptide receptor (GRPR) antagonist [ 99m Tc]1, ([ 99m Tc]demobesin 1, 99m Tc-[N 4 '-diglycolate-dPhe 6 ,Leu-NHEt 13 ]BBN(6-13)). [ 99m Tc]1 has shown superior biological profile compared to analogous agonist-based 99m Tc-radioligands. We herein present a small library of [ 99m Tc]1 mimics generated after structural modifications in (a) the linker ([ 99m Tc]2, [ 99m Tc]3, [ 99m Tc]4), (b) the peptide chain ([ 99m Tc]5, [ 99m Tc]6), and (c) the C-terminus ([ 99m Tc]7 or [ 99m Tc]8). The effects of above modifications on the biological properties of analogs were studied in PC-3 cells and tumor-bearing SCID mice. All analogs showed subnanomolar affinity for the human GRPR, while most receptor-affine 4 and 8 behaved as potent GRPR antagonists in a functional internalization assay. In mice bearing PC-3 tumors, [ 99m Tc]1-[ 99m Tc]6 exhibited GRPR-specific tumor uptake, rapidly clearing from normal tissues. [ 99m Tc]4 displayed the highest tumor uptake (28.8 ± 4.1%ID/g at 1 h pi), which remained high even after 24 h pi (16.3 ± 1.8%ID/g), well surpassing that of [ 99m Tc]1 (5.4 ± 0.7%ID/g at 24 h pi).

  1. Experience in infection images with new radio antibiotic the 99mTc-ceftizoxime (TCF)

    International Nuclear Information System (INIS)

    Soroa, Victoria E.; Rabiller, Graciela; Velasquez Espeche, Maria del H.; Roca, Manuel; Martin-Comin, Joseph

    2004-01-01

    Previous results obtained in the detection of infections with 99m Tc-ceftizoxime encourage to the group of work to investigate the behavior of an antibiotic of third generation: the ceftizoxime radiolabelled with 99m Tc and to compare it with other radio-labels in different infectious / inflammatory pathologies [es

  2. Deformación plástica de compuestos mullita/óxido de itrio

    Directory of Open Access Journals (Sweden)

    Ramírez de Arellano López, A.

    2001-06-01

    Full Text Available Mullite (3Al2O3.2SiO2 based composites have excellent mechanical and thermal properties. The same characteristics that give mullite good resistance to plastic deformation also make its sintering difficult. Yttria is one of the most commonly used additives to reduce sintering temperatures in mullite. Additionally vitreous silicates (Y2Si2O7 could improve ductility. In this work we have used mullite samples with various amounts of Y2O3 (0, 5 and 9 wt.%. Details of processing and characterization of these composites have been the subject of a previous publication. We have compared the ductility of these composites by means of compressive deformation tests at elevated temperatures. Creep tests were performed at temperatures between 1300 and 1400ºC, in air, in a stress range of 0.69 to 34.5 MPa.

    Los compuestos a partir de mullita (3Al2O3.2SiO2 presentan unas magníficas propiedades mecánicas y térmicas. Las mismas características que hacen de la mullita resistente a la deformación plástica, dificultan su densificación. El óxido de itrio es uno de los aditivos más utilizados para reducir la temperatura de sinterización de la mullita. Adicionalmente la presencia de silicatos vítreos (en este caso Y2Si2O7 incrementan la ductilidad. En esta investigación se han usado muestras de mullita con diversas cantidades de Y2O3 (0%, 5% y 9% en peso. Los detalles sobre el procesado y caracterización de los compuestos han sido objeto de una publicación previa. Se ha estudiado comparativamente la ductilidad de estos materiales mediante experimentos de deformación en compresión a alta temperatura. Los ensayos se han desarrollado entre 1300 y 1400ºC, en atmósfera de aire, cubriendo un rango de tensiones de compresión entre 0.69 y 34.4 MPa.

  3. Aluminio pulvimetalúrgico: desarrollo y mejora de sus aleaciones y materiales compuestos

    Directory of Open Access Journals (Sweden)

    Ruiz-Navas, E. M.

    2008-06-01

    Full Text Available Powder metallurgy components demand is increasing in the last few years mainly due to the necessity of products assigned to automotive and aerospace industries, which has allow an important development of aluminium alloys and composites (AMCs. Consolidation of aluminium alloys by sintering present a main problem: the oxide layer that cover aluminium particles. Several alternatives are studied in this work as solution to the oxide layer problem during the sintering of series 2xxx aluminium alloys. One of these solutions is related to the addition of tin traces, and the other is the addition of a second alloy. Moreover, aluminium metal matrix composites are characterized by excellent properties as combination of properties which comes from the matrix and from the reinforcement. The last part of this study is focused to the analysis of one aluminium matrix composite as the influence of several quantities of reinforcement.

    El auge en la demanda de componentes pulvimetalúrgicos destinados principalmente al sector automovilístico y aeroespacial ha permitido un fuerte desarrollo tanto de aleaciones como de MMCs base aluminio (AMCs. El principal problema a la hora de consolidar estos materiales vía pulvimetalúrgica es la capa de óxido que recubre a las partículas de aluminio. En este trabajo se presentan varias alternativas como solución a este problema, aplicadas a la consolidación de aleaciones de aluminio pertenecientes a la serie 2xxx, entre ellas, la adición de trazas de estaño y la adición de una aleación Al-Si. En cuanto a los materiales compuestos de matriz de aluminio, se caracterizan por presentar propiedades únicas como combinación de las propiedades individuales que caracterizan tanto a la matriz como al refuerzo. En la última parte de este trabajo se estudia la consolidación de un material compuesto así como la influencia de las distintas cantidades de refuerzo.

  4. Reactividad matriz-refuerzo en compuestos de matriz de titanio pulvimetalúrgico

    Directory of Open Access Journals (Sweden)

    Amigó, V.

    2007-12-01

    Full Text Available The high reactivity of titanium and the facility of the same one to form intermetallics makes difficult obtaining composites with this material and brings the need in any case of covering the principal fibres used as reinforcement. To obtain composites of titanium reinforced with ceramic particles is proposed in this paper, and for this reason it turns out to be fundamental to evaluate the reactivity between the matrix and reinforcement. Both titanium nitride and carbide (TiN and TiC are investigated as materials of low reactivity whereas titanium silicide (TiSi2 is also studied as materials of major reactivity, already stated by the scientific community. This reactivity will be analyzed by means of scanning electron microscopy (SEM there being obtained distribution maps of the elements that allow to establish the possible influence of the sintering temperature and time. Hereby the matrix-reinforcement interactions are optimized to obtain suitable mechanical properties.

    La elevada reactividad del titanio y la facilidad del mismo en formar intermetálicos dificulta la obtención de compuestos con este material y la necesidad, en todo caso, de recurrir al recubrimiento de las principales fibras utilizadas como refuerzo. Se propone obtener compuestos de titanio reforzados con partículas cerámicas y, por ello, resulta fundamental evaluar la reactividad entre los diferentes materiales. Se investiga como materiales de baja reactividad el nitruro y carburo de titanio y como materiales de mayor reactividad, ya constatada por la comunidad científica, el TiSi2. Esta reactividad se analizará mediante microscopía electrónica de barrido obteniéndose mapas de distribución de los elementos, que permiten establecer la posible influencia de la temperatura de sinterización y el tiempo de permanencia a éstas. De esta manera, se optimiza en lo posible las interacciones matriz-refuerzo para obtener unas propiedades mec

  5. Enhanced 99 Tc retention in glass waste form using Tc(IV)-incorporated Fe minerals

    Energy Technology Data Exchange (ETDEWEB)

    Um, Wooyong; Luksic, Steven A.; Wang, Guohui; Saslow, Sarah; Kim, Dong-Sang; Schweiger, Michael J.; Soderquist, Chuck Z.; Bowden, Mark E.; Lukens, Wayne W.; Kruger, Albert A.

    2017-11-01

    Technetium (99Tc) immobilization by doping into iron oxide mineral phases may alleviate the problems with Tc volatility during vitrification of nuclear waste. Reduced Tc, Tc(IV), substitutes for Fe(III) in the crystal structure by a process of Tc reduction from Tc(VII) to Tc(IV) followed by co-precipitation of Fe oxide minerals. Two Tc-incorporated Fe minerals (Tc-goethite and Tc-magnetite/maghemite) were prepared and tested for Tc retention in glass melt samples at temperatures between 600 – 1,000 oC. After being cooled, the solid glass specimens prepared at different temperatures were analyzed for Tc oxidation state using Tc K-edge XANES. In most samples, Tc was partially oxidized from Tc(IV) to Tc(VII) as the melt temperature increased. However, Tc retention in glass melt samples prepared using Tc-incorporated Fe minerals were moderately higher than in glass prepared using KTcO4 because of limited and delayed Tc volatilization.

  6. Hepatic accumulation of sup(99m)Tc-Sn-diphosphonate

    International Nuclear Information System (INIS)

    Hayashi, Sanshin; Oyama, Kazuyuki; Hirakawa, Ken; Akaike, Akira; Kogure, Takashi

    1977-01-01

    Six cases of hepatic accumulation of sup(99m)Tc-Sn-EHDP (ethane-1-hydroxy-1,1-diphosphonate) were encountered among 31 cases of bone scintigram. There were no uniformly common factors in sex, age, disease, liver function, or other laboratory data in these six patients. Colloidal formation was suspected since sup(99m)Tc-Sn-EHDP accumulated in the liver and spleen. EHDP vials from the same kit were analyzed and nothing abnormal was detected. EHDP vials of the same lot number were used in all of 31 cases. Samples of sup(99m)Tc eluate obtained from the same generator used to prepare EHDP and saline eluent from the same stock material used to elute the generator were analyzed. A small amount of aluminum ion and other oxidizer were found but they were thought to be insufficient as factors in the high liver uptake of EHDP because of too small a quantity. pH of sup(99m)Tc eluate was not unusual. Colloidal formation at the time of preparation of sup(99m)Tc-Sn-EHDP is not conceivable since most of the patients undergo bone scintigram without hepatic accumulation. It was assumed that somatic metallic ion substance, serum protein, or other endogeneous matter was responsible for the high liver uptake of EHDP. (auth.)

  7. Efecto de la ingesta de compuestos avanzados de la reacción de Maillard sobre el metabolismo gastrointestinal

    OpenAIRE

    Pastoriza de la Cueva, Silvia

    2013-01-01

    La realización de la presente tesis doctoral se ha llevado a cabo gracias a un contrato de Técnico Superior de Laboratorio adscrito al Proyecto de Excelencia concedido por la Junta de Andalucía (AGR-4135) denominado "Repercusiones de la ingesta de compuestos avanzados de la reacción de Maillard sobre el metabolismo gastrointestinal y óseo".

  8. GASIFICATION TEST RUN TC06

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services, Inc.

    2003-08-01

    This report discusses test campaign TC06 of the Kellogg Brown & Root, Inc. (KBR) Transport Reactor train with a Siemens Westinghouse Power Corporation (Siemens Westinghouse) particle filter system at the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama. The Transport Reactor is an advanced circulating fluidized-bed reactor designed to operate as either a combustor or a gasifier using a particulate control device (PCD). The Transport Reactor was operated as a pressurized gasifier during TC06. Test run TC06 was started on July 4, 2001, and completed on September 24, 2001, with an interruption in service between July 25, 2001, and August 19, 2001, due to a filter element failure in the PCD caused by abnormal operating conditions while tuning the main air compressor. The reactor temperature was varied between 1,725 and 1,825 F at pressures from 190 to 230 psig. In TC06, 1,214 hours of solid circulation and 1,025 hours of coal feed were attained with 797 hours of coal feed after the filter element failure. Both reactor and PCD operations were stable during the test run with a stable baseline pressure drop. Due to its length and stability, the TC06 test run provided valuable data necessary to analyze long-term reactor operations and to identify necessary modifications to improve equipment and process performance as well as progressing the goal of many thousands of hours of filter element exposure.

  9. CONDUCTIVIDAD Y PERCOLACION DE UN MATERIAL COMPUESTO: OXIDO MAGNETICO-POLIANILINA

    Directory of Open Access Journals (Sweden)

    Juan C. Aphesteguy

    2013-01-01

    Full Text Available El objetivo de este trabajo es estudiar la conductividad de un material compuesto (óxido de hierro /polianilina a fin de determinar la relación mínima entre sus componentes que mantiene la interconexión entre las partículas de polianilina. Para ello se prepararon por mezcla sólida, sistemas formados por polianilina (en su forma básica, no conductora, emeraldina dopada con ácido canforsulfónico (CSA y un óxido de hierro magnético (Fe xOy (parcialmente encapsulado en polianilina. Los polvos fueron compactados a 1,3.103 MPa. Se estudió la conductividad del sistema en función de la fracción en volumen (P del óxido incluido. Se determinó, para las condiciones experimentales establecidas, una fracción de percolación Pc = 0,131 (38,6 % m/m FexOy a 300K. Los resultados experimentales indicaron que la conductividad presenta un comportamiento crítico no universal que se interpretó empleando el modelo de Kusy.

  10. REMOCIÓN DEL COLORANTE COMPUESTO NARANJA REMAZOL DE AGUAS RESIDUALES GENERADAS EN LA INDUSTRIA TEXTIL

    Directory of Open Access Journals (Sweden)

    Luis A. Bernal

    2017-01-01

    Full Text Available El objetivo de este trabajo, fue determinar la capacidad de remoción del colorante compuesto naranja remazol presente en aguas residuales textiles, utilizando el proceso de adsorción con carbón activado, con base en el pH y la concentración de colorante. La metodología involucró la preparación de muestras con concentraciones de 100 a 600 ppm de colorante a pH de 3, 7 y 9; la obtención de isotermas ajustadas a los modelos de Langmuir y Freundlich; y la determinación de la concentración del colorante a través de un espectrofotómetro UV-Vis. Los resultados indicaron una mejor eficiencia de remoción del colorante a pH 3, concluyendo que a mayor pH disminuye la capacidad de adsorción, debido principalmente a las interacciones electrostáticas que se generan entre la superficie del adsorbente y el colorante.

  11. INTERACCIONES NUTRIMENTALES Y NORMAS DE DIAGNÓSTICO DE NUTRIMENTO COMPUESTO EN NOGAL PECANERO (Carya illinoensis

    Directory of Open Access Journals (Sweden)

    J. L. García-Hernández

    2009-01-01

    Full Text Available El cultivo de nogal pecanero (Carya illinoensis es actualmente uno de los de mayor rentabilidad en el norte de México. En la región conocida como la Comarca Lagunera que comprende parte de los estados de Coahuila y Durango se han reportado diversos desbalances nutrimentales que afectan el rendimiento y productividad de este cultivo. Este estudio fue desarrollado para determinar las normas de diagnóstico de nutrimento compuesto (DNC y para estudiar las interacciones entre nutrimentos de dicho cultivo. A través de la metodología de DNC se determinó el valor mínimo de alto rendimiento de fruto maduro, así como los rangos de macronutrimentos (N, P, K, Ca y Mg óptimos correspondientes en el tejido foliar, los cuales son llamados normas nutrimentales. Estas normas se definieron considerando un valor de rendimiento mínimo de 1.39 t·ha-1 en este cultivo. Los análisis de componentes principales, utilizando los índices de DNC, permitieron identificar las siguientes interacciones: positiva N-R y negativas N-Ca, K-Mg y P-Ca.

  12. Accumulation of TC-Methylene Diphosphonate Radiotracer in Rat's ...

    African Journals Online (AJOL)

    (99mTc-MDP), and molybdenum-technetium generator used in the study were prepared and confirmed by the Atomic Energy Organization of. Iran. Animals. Seven healthy Wistar rats ... veins were detected by surgery in standard methods. The radioisotope ... laboratory and on small animals [9-11]. Scintigraphy is one of the ...

  13. Kinetic study on ligand exchange reaction between ethylenedicysteine and 99mTc- glucoheptonate (99mTc-GH)

    International Nuclear Information System (INIS)

    Wu, C.Y.; Ji, S.R.; Lu, C.X.; Ding, S.Y.; Chen, Z.P.; Lin, X.T.

    2002-01-01

    Aim: 99m Tc-L,L-ethylenedicysteine( 99m Tc-EC)is a new type of renal imaging agent. It can be labeled very easily and efficiently at room temperature through direct labeling at pH 12. The need for direct labeling at pH 12 does not compromise the simplicity and ease of preparation of 99m Tc-EC and its practical usefulness in daily routine. On the basis of the labeling experiments, we developed a ligand exchange labeling method, in which the labeling EC with 99m Tc can be performed at pH 8. In order to provide a theoretic basis, a detailed kinetic study of ligand exchange reaction between 99m Tc- glucoheptonate( 99m Tc-GH) and EC was carried out. Materials and Methods: 99m Tc-EC is prepared as follows: 99m Tc-GH + EC → 99m Tc-EC + GH, labeling can be easily performed by adding 99m TcO 4 - (2∼6ml generator elute) to glucoheptonate solution containing SnCl 2 .2H 2 O solution to form 99m Tc-GH, then freshly prepared 99m Tc-GH is transferred to the aqueous solution of different concentrations of EC at different pH value, after being shaken, 99m Tc-EC was formed. Radiolabeling yield(RLY) and radiochemical purity(RCP) of 99m Tc-GH and 99m Tc-EC were measured by Xinhua No.1 paper with developing system of Me 2 CO/H 2 O/con.NH 3 .H 2 O=9/3/1(V/V). 99m Tc-GH(RCP must be over 98%, 80ul, 3.6∼7.4MBq) was added to 1ml of 0.5mol/L phosphate buffer(pH 12) containing different amount of EC(150, 75, 50 and 15ug), the sample was taken out at different time intervals and RCP was determined. The solution of EC(30ul, 5g/L) was added to 1ml of 0.5mol/L phosphate buffer at different pH value(pH11, 10, 9, 8, 7), after completely vortexed, 99m Tc-GH(RCP must be over 98%, 80ul, 3.6∼7.4MBq) was then added, the sample was taken out and RCP was determined as above. The rate constant(k) of ligand exchange reaction at different concentrations of EC and different reaction pH values were calculated out by integrating. Plot ln[1/(1-RLY)] vs t(time) showed a liner relationship, and the rate

  14. Análisis comparativo de compuestos fenólicos totales y actividad antioxidante de cuatro marcas de tisanas de Hibiscus sabdariffa (Malvaceae comercializadas en Costa Rica

    Directory of Open Access Journals (Sweden)

    Melissa Agüero

    2014-01-01

    Full Text Available Las tisanas de rosa de Jamaica (Hibiscus sabdariffa son consumidas en Costa Rica por su conocido efecto cardioprotector asociado a la presencia de compuestos fenólicos, principalmente antocianinas. Este trabajo estableció diferencias en el perfil de compuestos fenólicos y su actividad anti-radical entre diferentes comercializadores de tisanas de Hibiscus sabdariffa en Costa Rica. Se identificaron cualitativamente taninos, flavonoides y antocianinas. Se cuantificó la cantidad total de compuestos fenólicos por el método de Folin-Ciocalteu y se cuantificó la actividad antioxidante con el método de DPPH. Todas las marcas comerciales demostraron presencia de compuestos fenólicos, incluyendo antocianinas; sin embargo, se encontraron diferencias significativas en el contenido de compuestos fenólicos y actividad anti-radical, entre los diferentes productores de tisanas. Por ello, se concluye que en el mercado costarricense, el perfil en compuestos fenólicos de las tisanas en estudio varía de acuerdo con el productor.

  15. Generator 113{sup S}n-113m{sup I}n. Study of the most important characteristics in the evaluate composition for the preparation of clinical labelled compounds; Generador de 113{sup S}n- 113m{sup I}n. Estudio de las caracteristicas mas relevantes en la composicion del eluido con miras a la obtencion de compuestos marcados de aplicacion clinica

    Energy Technology Data Exchange (ETDEWEB)

    Adan, L; Rebollo, D V

    1978-07-01

    The design for the construction of a generator 113{sup S}n -113m{sup l}n is described. A systematic assay for de adequate adsorbents has been made, to obtain solutions of high radiochemical purity, as it is required for the radiopharmaceutical preparations. The control of purity is carried on by qualitative and quantitative analysis of the solutions, complemented by radiochemical techniques. The following physico-chemical parameters has been determinate; consecutive equilibrium constants, pH, distribution constants, separation factors and electrophoretic factors. It has been considered the measure of these parameters for the best quality In the preparation of the radiopharmaceutical compounds. (Author) 53 refs.

  16. Power Systems Development Facility Gasification Test Campaign TC25

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2008-12-01

    In support of technology development to utilize coal for efficient, affordable, and environmentally clean power generation, the Power Systems Development Facility (PSDF), located in Wilsonville, Alabama, routinely demonstrates gasification technologies using various types of coals. The PSDF is an engineering scale demonstration of key features of advanced coal-fired power systems, including a KBR Transport Gasifier, a hot gas particulate control device, advanced syngas cleanup systems, and high-pressure solids handling systems. This report summarizes the results of TC25, the second test campaign using a high moisture lignite coal from the Red Hills mine in Mississippi as the feedstock in the modified Transport Gasifier configuration. TC25 was conducted from July 4, 2008, through August 12, 2008. During TC25, the PSDF gasification process operated for 742 hours in air-blown gasification mode. Operation with the Mississippi lignite was significantly improved in TC25 compared to the previous test (TC22) with this fuel due to the addition of a fluid bed coal dryer. The new dryer was installed to dry coals with very high moisture contents for reliable coal feeding. The TC25 test campaign demonstrated steady operation with high carbon conversion and optimized performance of the coal handling and gasifier systems. Operation during TC25 provided the opportunity for further testing of instrumentation enhancements, hot gas filter materials, and advanced syngas cleanup technologies. The PSDF site was also made available for testing of the National Energy Technology Laboratory's fuel cell module and Media Process Technology's hydrogen selective membrane with syngas from the Transport Gasifier.

  17. Comportamiento frente al desgaste en materiales compuestos de aluminio reforzados con partículas cerámicas

    Directory of Open Access Journals (Sweden)

    Busquets-Mataix, D.

    2004-04-01

    Full Text Available The present work deals with the wear behaviour on AA6061 based aluminium matrix composites reinforced with different kinds of ceramic particles: TiB2, B4C, Si3N4, Al2O3 y SiC. Composites were obtained by means of a solid-state consolidation method, combining both powder metallurgy processing and hot extrusion. The study carried out was based on a pin-on-ring apparatus under dry sliding conditions (dry friction. Both friction coefficient and wear rate were measured for each composite. Scanning Electron Microscope (SEM was used to analyse wear and the tribolayer formed. Results show that wear rate is lower in composites than in the unreinforced alloy in every case, as expected. Differences among composites are probably related to different particle size rather than nature of reinforcements. On the other hand, friction coefficient do not show a trend on composites, being lower than the base alloy in some cases and higher in others.

    El presente artículo trata sobre las propiedades tribológicas en materiales compuestos de matriz de aleación de aluminio AA6061, reforzados con partículas cerámicas de diferente naturaleza: TiB2, B4C, Si3N4, SiC y Al2O3. Los materiales compuestos fueron obtenidos mediante un procedimiento de consolidación en estado sólido que combina la pulvimetalurgia con un proceso de extrusión en caliente. El estudio tribológico realizado se basó en una metodología de ensayo del tipo pin-on-ring con deslizamiento en seco (sin lubricación. Se analizaron para cada caso el coeficiente de rozamiento y la tasa de desgaste en función de la distancia de deslizamiento. Asimismo, las muestras ensayadas se observaron mediante microscopía electrónica de barrido. Los resultados obtenidos demuestran que las tasas de desgaste de los compuestos son inferiores en todos los casos a los de la matriz sin reforzar. Entre los compuestos, las diferencias encontradas son debidas al tamaño medio de las partículas de refuerzo, obteni

  18. Technetium-99 in ''instant'' sup(99m)Tc-pertechnetate

    International Nuclear Information System (INIS)

    Mattsson, S.

    1978-01-01

    The 99 Tc-content in sup(99m)Tc-pertechnetate separated from 99 Mo by distillation or extraction has been studied with a plastic scintillation detector. The identification of the measured activity was achieved by beta-spectrometry, chemical separation and half-life studies. The frequency distribution of the sup(99)Tc/sup(99m)Tc-ratios in the different samples was observed to be log-normal. The most likely activity ratio was 0.4x10 -6 , the maximum value being 5x10 -6 . The specific activity of ''instant'' pertechnetate is approximately a factor of 60 lower than that normally recorded in pertechnetate derived from daily eluted column generators. The low specific activity of ''instant'' pertechnetate is primarily explained by the long time between separation and usage and secondly by the low yield of Tc in the distillation and extraction processes. In several of the ''instant'' pertechnetate solutions the carrier concentration exceeded the reductive capacity of the stannous ions in ''kits'' with small amounts of Sn(II) in usable form. (T.G.)

  19. Tc-99m imaging agents

    International Nuclear Information System (INIS)

    Weininger, J.; Trumper, J.

    1984-01-01

    A wide range of pharmaceuticals for labeling with Tc-99m, developed by the Soreq Radiopharmaceuticals Department, is described. Details of the production and quality control of 13 kits are given, as well as the range of results required for consistently high quality imaging agents

  20. Fibras vegetales colombianas como refuerzo en compuestos de matriz polimérica

    Directory of Open Access Journals (Sweden)

    José Luis Suárez Castañeda

    2017-01-01

    Full Text Available Contexto: Se realizó una búsqueda local de tejidos de fibras vegetales para determinar la composición de los grupos funcionales y morfología de su superficie antes y después de un tratamiento alcalino con miras a su empleo como refuerzo en compuestos de matriz polimérica. Método: La búsqueda se desarrolló dentro del área metropolitana del Valle de Aburrá, Colombia. Las fibras se trataron por inmersión en NaOH disuelto al 6 % w/v por 48 horas, seguida por una neutralización en ácido acético al 1 % v/v por una hora. Posteriormente fueron secadas a 60 °C por 24 horas. Las técnicas empleadas para los análisis fueron la espectroscopía infrarroja por transformada de Fourier (FTIR y la microscopía electrónica de barrido (SEM. Resultados: Se seleccionaron tejidos de fique, yute, corteza de coco, lino y algodón. Los análisis FTIR muestran una tendencia a la disminución de ácidos grasos, hemicelulosas, ligninas y enlaces β en la superficie de las fibras, mientras que las imágenes SEM demuestran la remoción de impurezas, la exposición de rugosidades y la creación de espacios interfibrales. Conclusiones: El tratamiento alcalino podría favorecer el mecanismo de anclaje del polímero termofijo a la superficie de las fibras y la creación de enlaces entre las moléculas polares de las fibras y el polímero termofijo, disminuyendo el deslizamiento relativo entre matriz y refuerzo durante la aplicación de cargas.

  1. Enhanced99Tc retention in glass waste form using Tc(IV)-incorporated Fe minerals

    OpenAIRE

    Um, W; Luksic, SA; Wang, G; Saslow, S; Kim, DS; Schweiger, MJ; Soderquist, CZ; Bowden, ME; Lukens, WW; Kruger, AA

    2017-01-01

    © 2017 Elsevier B.V. Technetium ( 99 Tc) immobilization by doping into iron oxide mineral phases may alleviate the problems with Tc volatility during vitrification of nuclear waste. Because reduced Tc, Tc(IV), substitutes for Fe(III) in the crystal structure by a process of Tc reduction from Tc(VII) to Tc(IV) followed by co-precipitation of Fe oxide minerals, two Tc-incorporated Fe minerals (Tc-goethite and Tc-magnetite/maghemite) were prepared and tested for Tc retention in glass melt sample...

  2. Direct 99mTc labeling of monoclonal antibodies: radiolabeling and in vitro stability

    International Nuclear Information System (INIS)

    Garron, J.Y.; Moinereau, M.; Pasqualini, R.; Saccavini, J.C.

    1991-01-01

    Direct labeling involves 99m Tc binding to different donor groups on the protein, giving multiple binding sites of various affinities resulting in an in vivo instability. The stability has been considerably improved by activating the antibody using a controlled reduction reaction (using 2-aminoethanethiol). This reaction generates sulfhydryl groups, which are known to strongly bind 99m Tc. The direct 99m Tc antibody labeling method was explored using whole antibodies and fragments. Analytical methods were developed for routine evaluation of radiolabeling yield and in vitro stability. Stable direct antibody labeling with 99m Tc requires the generation of sulfhydryl groups, which show high affinity binding sites for 99m Tc. Such groups are obtained with 2-aminoethanethiol (AET), which induces the reduction of the intrachain or interchain disulfide bond, with no structural deterioration or any loss of immunobiological activity of the antibody. The development of fast, reliable analytical methods has made possible the qualitative and quantitative assessment of technetium species generated by the radiolabeling process. Labeling stability is determined by competition of the 99m Tc-antibody bond with three ligands, Chelex 100 (a metal chelate-type resin), free DTPA solution and 1% HSA solution. Very good 99m Tc-antibody stability is obtained with activated IgG (IgGa) and Fab' fragment, which makes these substances possible candidates for immunoscintigraphy use. (author)

  3. Recent achievements in Tc-99m radiopharmaceutical direct production by medical cyclotrons.

    Science.gov (United States)

    Boschi, Alessandra; Martini, Petra; Pasquali, Micol; Uccelli, Licia

    2017-09-01

    99m Tc is the most commonly used radionuclide in the field of diagnostic imaging, a noninvasive method intended to diagnose a disease, assess the disease state and monitor the effects of treatments. Annually, the use of 99m Tc, covers about 85% of nuclear medicine applications. This isotope releases gamma rays at about the same wavelength as conventional X-ray diagnostic equipment, and owing to its short half-life (t ½  = 6 h) is ideal for diagnostic nuclear imaging. A patient can be injected with a small amount of 99m Tc and within 24 h almost 94% of the injected radionuclide would have decayed and left the body, limiting the patient's radiation exposure. 99m Tc is usually supplied to hospitals through a 99 Mo/ 99m Tc radionuclide generator system where it is produced from the β decay of the parent nuclide 99 Mo (t ½  = 66 h), which is produced in nuclear reactors via neutron fission. Recently, the interruption of the global supply chain of reactor-produced 99 Mo, has forced the scientific community to investigate alternative production routes for 99m Tc. One solution was to consider cyclotron-based methods as potential replacement of reactor-based technology and the nuclear reaction 100 Mo(p,2n) 99m Tc emerged as the most worthwhile approach. This review reports some achievements about 99m Tc produced by medical cyclotrons. In particular, the available technologies for target design, the most efficient extraction and separation procedure developed for the purification of 99m Tc from the irradiated targets, the preparation of high purity 99m Tc radiopharmaceuticals and the first clinical studies carried out with cyclotron produced 99m Tc are described.

  4. Oxidative Stability of Tc(I) Tricarbonyl Species Relevant to the Hanford Tank Waste

    Energy Technology Data Exchange (ETDEWEB)

    Chatterjee, Sayandev [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hall, Gabriel B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Levitskaia, Tatiana G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walter, Eric D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Washton, Nancy M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-17

    Technetium (Tc), which exists predominately in the liquid supernatant and salt cake fractions of the nuclear tank waste stored at the U.S. DOE Hanford Site, is one of the most difficult contaminants to dispose of and/or remediate. In the strongly alkaline environments prevalent in the tank waste, its dominant chemical form is pertechnetate (TcO4-, oxidation state +7). However, based on experimentation to-date, a significant fraction of the soluble Tc cannot be effectively separated from the wastes and may be present as a non-pertechnetate species. The presence of a non pertechnetate species significantly complicates disposition of low-activity waste (LAW), and the development of methods to either convert them to pertechnetate or to separate the non-pertechnetate species directly is needed. The challenge is the uncertainty regarding the nature and stability of the alkaline-soluble, low-valence, non pertechnetate species in the liquid tank waste. One objective of the Tc management project is to address this knowledge gap. This fiscal year (FY) 2015 report summarizes experimental work exploring the oxidative stability of model low-valence Tc(I) tricarbonyl species, derived from the [Tc(CO)3]+ moiety. These compounds are of interest due to their implied presence in several Hanford tank waste supernatants. Work in part was initiated in FY 2014, and a series of samples containing non-pertechnetate Tc generated ex situ or in situ in pseudo-Hanford tank supernatant simulant solutions was prepared and monitored for oxidation to Tc(VII) (Levitskaia et al. 2014). This experimentation continued in FY 2015, and new series of samples containing Tc(I) as [Tc(CO)3]+•Ligand was tested. The monitoring method used for these studies was a combination of 99Tc NMR and EPR spectroscopies.

  5. Estado de la cuestión sobre compuestos de yeso. la importancia actual de los residuos

    OpenAIRE

    San-Antonio González, A; Río Merino, Mercedes Del; Viñas Arrebola, Carmen

    2013-01-01

    El interés de los investigadores por mejorar las propiedades de los materiales tradicionales de construcción ha dado lugar a una gran cantidad de publicaciones durante las últimas décadas. El yeso es un material natural comúnmente utilizado en la construcción de edificios en forma de enlucidos y placas de yeso prefabricadas. En este estudio se estudian las líneas de investigación llevadas a cabo sobre los compuestos que tienen una matriz de yeso, mediante el análisis de los artículos científi...

  6. Procesado, estructura y propiedades de materiales compuestos de matriz termoplástica y nanorefuerzos de carbono

    OpenAIRE

    Ramón Valencia, Bladimir Azdrúbal

    2014-01-01

    208 p. El presente trabajo de tesis doctoral está orientado hacia el conocimiento de la relación existente entre los procesos de conformación, estructura y propiedades mecánicas y térmicas de termoplásticos de alto rendimiento mediante la incorporación de nanorefuerzos de tipos carbonoso. En el primer apartado se realizó un estudio comparativo del efecto de las fibras de carbono cortas (FC) y de las nanofibras de carbono (CNF) en los materiales compuestos de matriz de PEEK con el objeto de...

  7. Revisión - Caracterización de compuestos de caucho con residuos de cuero posindustrial

    OpenAIRE

    Urrego Yepes, William; Cardona Vásquez, Natalia; Velásquez Restrepo, Sandra Milena; Abril Carrascal, Carolina

    2017-01-01

    RESUMEN Comúnmente los residuos industriales son dispuestos en vertederos o destinados para incineración, perdiendo con esto su uso potencial como materias primas en la fabricación de nuevos materiales. Las industrias del caucho y del cuero son consideradas como algunas de las más contaminantes a nivel mundial, sin embargo la industria del caucho ha demostrado su interés en el desarrollo de compuestos que involucren el uso de materiales clasificados como de desecho. Esta revisión abarca de ma...

  8. Materiales compuestos biodegradables con usos agronómicos a partir de raíces tuberosas

    OpenAIRE

    Versino, Florencia

    2017-01-01

    Los materiales poliméricos abarcan un amplio abanico de compuestos tanto naturales (proteínas, almidones, etc.) como sintéticos (polietilenos, poliuretanos, resinas epoxy, etc.) cuya versatilidad y fácil procesamiento los ha vuelto adecuados para un gran número de aplicaciones industriales. A raíz de la creciente necesidad de mitigar las emisiones de gases de efecto invernadero, reducir la acumulación de residuos sólidos y disminuir el consumo de recursos no renovables, el interés en el desar...

  9. Inmunonutrición: una potente herramienta para evaluar situaciones nutricionales y beneficios de nutrientes, compuestos bioactivos y alimentos

    OpenAIRE

    Díaz, L. E.; Gómez Martínez, Sonia; Nova, Esther; Romeo, J.; Marcos, Ascensión

    2012-01-01

    © 2012 Kellogg Company.El texto está disponible para cualquiera que se registre previamente en http://www.katedrakelloggs.com .- 8.Inmunonutrición: una potente herramienta para evaluar situaciones nutricionales y beneficios de nutrientes, compuestos bioactivos y alimentos119-130; 12 páginas,3 figuras, 3 tablas--Manual Práctico de Nutrición y Salud Kellogg’s, obra colectiva de visión multidisciplinar que surge a propuesta del colectivo médico ante la necesidad de recibir formación en materia d...

  10. Una interesante aproximación histórica al estudio del péndulo compuesto

    OpenAIRE

    Camargo, C.; Páez, R.

    2012-01-01

    Este artículo presenta una adaptación de la versión que hace E. Mach de la solución de Huy gens al problema de hallar el período de oscilación de un péndulo compuesto por varias partículas colocadas en linea, un problema de interés histórico y didáctico. Se propone también una solución intuitiva, que surge de consideraciones semejantes, al problema de hallar el periodo de oscilación de un aro.

  11. Flujo de compuestos organoclorados en las cadenas troficas de la cienaga de Santa Marta

    Directory of Open Access Journals (Sweden)

    Hernado Campos Néstor

    1993-12-01

    Full Text Available Monthly samples of seston and fish species of different throphic levels were done at the Ciénaga Grande de Santa Marta in orderto describe organochlorinated compounds dynamics. The fish used were: atlantic anchoveta, mulletand catfish. The organochlorinated contents were determined by gas-liquid chromatography using n-Hexane and Acetonitrilo as extraction solvents. The results were compared to 14 organochlorinated pure patrons. The following accumulations patterns were found: atlantic nchoveta 2240 times, mullet 2343 times and catfish 21800 times and the magnifying factors among the differents thropic levels: mullet/atlantic anchoveta = 1.47, catfish/atlantic anchoveta = 2.6 and catfish/mullet = 3.3 The transport model of the organochlorinated compounds in the Cienaga Grande de Santa Marta is described bassed in these results.Con el fin de describir la dinámica de los compuestos organoclorados a través de la red trófica de la Ciénaga Grande de Santa Marta, se adelantaron muestreos simultáneos del seston y de peces de diferentes niveles tróficos: bocona (cetengraulis edentulus planctófago; lisa (Mugil incilis detritívoro; el chivo (Ariopsis boniiíei; carnívoro. Se determinaron los contenidos de organoclorados por cromatografía gas-líquido, empleando n-hexano y acetonitrilo como solventes de extracción y se compararon con 14 patrones puros de organoclorados. Los factores de acumulación para la bocona son de 2240 veces, para la lisa 2343 y para el chivo 21800. Los factores de magnificación entre los diferentes niveles tróficos son lisa/bocona = 1.47; chivo/lisa = 3.3; chivo/bocona = 2.6. Se describe el modelo de flujos de los organoclorados en la Ciénaga Grande de Santa Marta con base en estos resultados.

  12. Compuestos fenólicos del olivo (Olea europea

    Directory of Open Access Journals (Sweden)

    Maestro-Durán, R.

    1994-08-01

    Full Text Available Certain plant properties, such as the colour, the nutritional value, the resistance to microorganisms, the pharmacologic effects and the organoleptic character, are due to the phenolic compounds. It is interesting the study of phenolic compounds from olive because they:

    -Inhibit Gram+ microorganisms, such as Lactobacillus, which are involved in the fermentation of the olive fruit. -Inhibit the activity of cellulases and other enzymes. -Contribute to the stability and organoleptic character of virgin olive oil. -Inhibit the effect of microorganisms involved in the anaerobic depuration of vegetation water. Thus, the phenolic compounds are the major bothersome contaminants of these wastewater. -Have pharmacologic properties (to reduce blood pressure levels. -Are natural antioxidants.

    In the present review we describe the composition of the phenolic compounds from the olive fruit (pulp and seed, the olive oil and its by-products (vegetation water and rape and the olive leaves.

    Ciertas propiedades de las plantas, como el color, valor nutricional, autoprotección contra microorganismos, propiedades farmacológicas o caracteres organolépticos, son debidas a los compuestos fenólicos. Su estudio, en el caso del olivo, es de gran interés por diversas razones:

    -Por su carácter antibiótico, los fenoles de la aceituna inhiben los microorganismos Gram+, como Lactobacillus, necesarios para la fermentación de aceitunas de mesa. -Inhiben la acción de las celulasas y otras enzimas. -Son los responsables de la alta estabilidad de los aceites vírgenes de oliva, así como de alguno de sus caracteres organolépticos. -Inhiben la acción de los microorganismos responsables de la depuración anaerobia de los alpechines y son las sustancias contaminantes de estas aguas residuales cuya degradación para eliminar la DQO presenta más dificultades. -Tienen propiedades

  13. Procesado y propiedades de impacto de materiales compuestos laminados de base hierro

    Directory of Open Access Journals (Sweden)

    Carreño, F.

    2001-04-01

    Full Text Available A seven layers steel based laminated composite (four ultra-high carbon steel, UHCS, layers and three mild steel, MS, layers has been processed by rolling bonding and its microstructure and impact properties have been studied. Suitable parameters of temperature and thickness reduction were selected to obtain a finer microstructure relative to the original material components. This finer microstructure induces improved mechanical properties. Charpy impact tests values in both "crack arrester" and "crack divider" orientations improve the values of the UHCS constituent material. Furthermore, the crack arrester orientation value exceed that of the MS material. The delamination, which is controlled by interface bonding, plays a key role deflecting the crack, absorbing energy and imposing the nucleation of new cracks in the next material layer.

    Se ha procesado un material compuesto laminado de base hierro, de 7 capas alternas de dos aceros diferentes (cuatro capas de acero de ultra-alto contenido en carbono, AUAC, y tres de acero suave, AS, mediante unión por laminación y se ha estudiado su microestructura y propiedades de impacto. Se eligieron los parámetros adecuados de temperatura y de reducción de espesor para obtener una microestructura más fina que la de los aceros constituyentes originales, lo que induce una mejora en las propiedades mecánicas. Los valores de energía absorbida en el ensayo Charpy, tanto en la dirección "en paralelo" como "en serie", han mejorado sustancialmente el valor asociado al AU AC monolítico. Además, el valor obtenido en la dirección "en serie" es superior al del AS. Se observa que la delaminación, que depende de la unión de las intercaras, juega un papel importante en la deflexión de las fisuras, absorbiendo energía e imponiendo sucesivas nucleaciones de grietas en las siguientes capas.

  14. Accelerator production of 99mTc with proton beams and enriched 100Mo targets

    International Nuclear Information System (INIS)

    Lagunas-Solar, M.C.

    1999-01-01

    The direct production of 99m Tc has been developed based upon the use of the 100 Mo(p,2n) 99m Tc reaction (Q= -7.9 MeV), using enriched 100 Mo targets and accelerated protons of 99m Tc yields measured in this work reached 851 ± 77 MBq/μA/h (23.0 ± 3.0 mCi/μA/h) at end-of-bombardment (EOB) in the 22-12 MeV energy region, with 96 Tc (4.35 d) as the only detectable impurity at - accelerators, and by extracting multiple H + beams to bombard a single or an array of enriched 100 Mo targets, this method could provide nearly 851 GBq (23 Ci) of 99m Tc in 1-h bombardments. Because of this large-batch potential, this new method appears to be an effective alternative to the production and distribution of 99 Mo → 99m Tc generator systems, although it may be limited to daily, regional/local distribution and use. 99m Tc produced in this fashion has high radionuclidic and radiochemical purity, although its specific activity has not been determined. The accelerator-made 99m Tc has been shown to have similar physical and chemical characteristics than 99m Tc eluted from commercial fission-produced 99 Mo → 99m Tc generators. Technical and logistical factors need further study and analysis but the potential and the expected impact of this new method are clear in the context of the operation of large radionuclide distribution centers as well as for small programs in developing regions. (author)

  15. Analysis of 99Tc and Its Activity Level in the Korean Soil

    International Nuclear Information System (INIS)

    Lee, Chang Woo; Chung, Kun Ho; Cho, Young Hyun; Kang, Mun Ja; Lee, Wanno; Kim, Hee Reyoung; Choi, Geun Sik

    2009-01-01

    An analytical method of 99 Tc concentration in soil was set up and discussed considering the 99 Tc concentration in Korean soil measured with its analytical method. A selective TEVA resin was used to separate and purify 99 Tc the in the soil sample. 99 Tc from a commercial 99 Mo/ 99m Tc generator was used as a yield tracer for the chemical separation of 99 Tc and its problem when using as a tracer was discussed. The chemical recovery yield of was above 70%. The optimum conditions of inductively coupled plasma mass spectrometry system (ICP-MS) were set up to determine the 99 Tc after the separation process. The minimum detectable activity (MDA) was 15 mBq/kg-dry in this analytical procedure. The 99 Tc concentration in soils of Jeju and Kori were measured in the rage of 33.73-89.16 mBq/kg-dry. Those values were less than those reported in other countries and seemed to be originated from atmospheric fallout.

  16. A new approach for manufacturing and processing targets to produce 99mTc with cyclotrons

    Science.gov (United States)

    Matei, L.; McRae, G.; Galea, R.; Niculae, D.; Craciun, L.; Leonte, R.; Surette, G.; Langille, S.; Louis, C. St.; Gelbart, W.; Abeysekera, B.; Johnson, R. R.

    2017-06-01

    The most important radioisotope for nuclear medicine is 99mTc. After the supply crisis of 99Mo starting in 2008, the availability of 99mTc became a worldwide concern. Alternative methods for producing the medical imaging isotope 99mTc are actively being developed around the world. The reaction 100Mo(p, 2n)99mTc provides a direct route that can be incorporated into routine production in nuclear medicine centers that possess medical cyclotrons for production of other isotopes, such as those used for Positron Emission Tomography. This paper describes a new approach for manufacturing targets for the (p, 2n) nuclear reaction on 100Mo and the foundation for the subsequent commercial separation and purification of the 99mTc produced. Two designs of targets are presented. The targets used to produce 99mTc are subject to a number of operational constraints.They must withstand the temperatures generated by the irradiation, accommodate temperature gradients from cooling system of the target, must be resilient and must be easily post-processed to separate the 99mTc. After irradiation, the separation of Tc from Mo was carried out using an innovative two-step approach. The process described in this paper can be automated with modules that easily fit in standard production hot cells found in nuclear medicine facilities.

  17. Experience in infection images with new radio antibiotic the {sup 99m}Tc-ceftizoxime (TCF); Experiencia en imagenes de infecciones con un nuevo radio-antibiotico la ceftizoxima-{sup 99m}Tc (CFT)

    Energy Technology Data Exchange (ETDEWEB)

    Soroa, Victoria E; Rabiller, Graciela; Velasquez Espeche, Maria del H. [Comision Nacional de Energia Atomica, Buenos Aires (Argentina). Centro de Medicina Nuclear; Fioriolli, Marcelo H; Rodriguez, Hernan [Hospital de Clinicas Jose de San Martin, Buenos Aires (Argentina); Roca, Manuel; Martin-Comin, Joseph [Hospital Universitario Bellvitge, Barcelona (Spain). Servicio de Medicina Nuclear

    2004-07-01

    Previous results obtained in the detection of infections with {sup 99m}Tc-ceftizoxime encourage to the group of work to investigate the behavior of an antibiotic of third generation: the ceftizoxime radiolabelled with {sup 99m}Tc and to compare it with other radio-labels in different infectious / inflammatory pathologies. [Spanish] Anteriores resultados obtenidos en la deteccion de infecciones con el {sup 99m}TC-ceftizoxima incentivo al grupo de trabajo a investigar el comportamiento de un antibiotico de tercera generacion: la ceftizoxima radiomarcada con {sup 99m}Tc y compararlo con otros radiomarcadores en diferentes patologias infecciosas/inflamatorias.

  18. Evolution of {sup 99}Tc Species in Cementitious Nuclear Waste Form

    Energy Technology Data Exchange (ETDEWEB)

    Um, Woo Yong; Westsik, Joseph H. [Pacific Northwest National Laboratory, Richland (United States)

    2011-05-15

    Technetium (Tc) is produced in large quantities as a fission product during the irradiation of {sup 235}U-enriched fuel for commercial power production and plutonium genesis for nuclear weapons. The most abundant isotope of Tc present in the wastes is {sup 99}Tc because of its high fission yield ({approx}6%) and long half-life (2.13x10{sup 5} years). During the Cold War era, generation of fissile {sup 239}Pu for use in America's atomic weapons arsenal yielded nearly 1900 kg of {sup 99}Tc at the U.S. Department of Energy's (DOE) Hanford Site in southeastern Washington State. Most of this {sup 99}Tc is present in fuel reprocessing wastes temporarily stored in underground tanks awaiting retrieval and permanent disposal. After the wastes are retrieved from the storage tanks, the bulk of the high-level waste (HLW) and lowactivity waste (LAW) stream is scheduled to be converted into a borosilicate glass waste form that will be disposed of in a shallow burial facility called the Integrated Disposal Facility (IDF) at the Hanford Site. Even with careful engineering controls, volatilization of a fraction of Tc during the vitrification of both radioactive waste streams is expected. Although this volatilized Tc can be captured in melter off-gas scrubbers and returned to the melter, some of the Tc is expected to become part of the secondary waste stream from the vitrification process. The off-gas scrubbers downstream from the melters will generate a high pH, sodium-ammonium carbonate solution containing the volatilized Tc and other fugitive species. Effective and cost-efficient disposal of Tc found in the off-gas scrubber solution remains difficult. A cementitious waste form (Cast Stone) is one of the nuclear waste form candidates being considered to solidify the secondary radioactive liquid waste that will be generated by the operation of the waste treatment plant (WTP) at the Hanford Site. Because Tc leachability from the waste form is closely related with Tc

  19. ESTUDIO DE LA RESISTENCIA MECÁNICA DE MATERIALES COMPUESTOS POLIMÉRICOS REFORZADOS CON FIBRAS DE CARBONO

    Directory of Open Access Journals (Sweden)

    Enrique Rocha-Rangel

    2011-01-01

    Full Text Available Materiales compuestos hechos de una resina epóxica reforzada con diferentes contenidos de fibra de carbono, fueron preparados por dos técnicas de laminación diferentes. Se aplicó 1 Kg/cm2 de presión en los laminados, mientras, que otros laminados se sometieron a un vacío de 1 atm. De los resultados se tiene que las resistencias a la flexión y tensión de los compósitos son mejoradas con el aumento en el contenido de fibra en los mismos. Los compósitos resultantes presentan un mejor comportamiento mecánico bajo esfuerzos de tensión que cuando lo hacen bajo esfuerzos de flexión, debido a que en flexión las fibras se rompen eventualmente, provocando que el material falle a bajos valores de esfuerzo. Cuando los materiales compuestos son sometidos a tensión, las fibras trasmiten los esfuerzos entre ellas y el material falla hasta que se acumula la energía necesaria para romper todas las fibras de una sola vez.

  20. Synthesis and formulation of 99m Tc-ECD radiopharmaceutical

    International Nuclear Information System (INIS)

    Ocampo G, B.E.

    1998-01-01

    Nuclear medicine is a medical specialty which uses radioactive compounds (radionuclides) for diagnostic and therapeutic purposes. 99m Tc is the more common radionuclide used in many studies in nuclear medicine because its advantages: it has a photopeak of 140 KeV and a half-life of 6 hours; it can be eluted from a Molybdenum 99 generator, so radiopharmaceuticals can be prepared on site. Ethyl cysteine dimer (ECD) labelled with reduced Technetium 99m has been purposed recently as a promising radiopharmaceutical for brain perfusion imaging 99m Tc-ECD is a lipophilic neutral complex which cross the brain blood barrier and show high brain uptake. The objective of this work was synthesize and to design a freeze dried formulation for the instant preparation of 99m Tc-ECD complex useful for brain perfusion imaging. We obtained a freeze dried stable formulation for the preparation of 99m Tc-ECD kit with a radiochemical purity higher than 90 %, which fulfills with the quality control of radiopharmaceuticals. Furthermore, we developed analytic techniques for the determination of the different chemical compounds into the lyophilized kit. (Author)

  1. Evaluación de las propiedades de materiales compuestos fabricados a partir de fibras semiquímicas de Leucaena collinsii y polipropileno

    OpenAIRE

    Granda Garcia, Luis Angel

    2016-01-01

    La presente tesis estudia el efecto que produce reforzar una fibra semiquímica de Leucaena collinsii en las propiedades mecánicas, térmicas y de sorción de agua de materiales compuestos de polipropileno. Se obtienen probetas de materiales compuestos con distinto contenido de refuerzo y se estabilizan en una cámara climática durante 48 horas antes de ser ensayadas a tracción, flexión e impacto, y se analiza la morfologia de la fractura mediante SEM. Posteriormente se estudian sus propiedad...

  2. Catalizadores soportados en carbón activado para la oxidación total de Compuestos Orgánicos Volátiles

    OpenAIRE

    Abdelouahab Reddam, Zinab

    2015-01-01

    Los compuestos orgánicos volátiles (COVs) forman un grupo importante de contaminantes atmosféricos. Estos compuestos, precursores de la formación de ozono troposférico, no sólo son perjudiciales para los seres humanos, sino que también pueden alterar la actividad fotosintética de las plantas y contribuyen al calentamiento global del planeta. Por ello, se han desarrollado varias técnicas para su eliminación en corrientes de aire contaminadas, de las cuales la oxidación catalítica ha demostrado...

  3. Pharmacokinetics of 99mTc-technefit in radionuclide investigations of liver and spleen

    International Nuclear Information System (INIS)

    Ovdienko, N.I.; Starovojtova, L.P.; Kodina, G.E.; Malysheva, A.O.; Tul'skaya, T.I.

    1987-01-01

    The authors present the results of an experimental study of pharmacokinetics of a new Soviet drug 99m Tc-technefit for scintigraphy of the liver and spleen. The results of biological distribution of the agent in rat, scintigrams of the liver and spleen in rabbits and dogs have shown a high accumulation of 99m Tc-technefit in the liver (up to 90%). The agent is prepared within one stage from a kit of reagents and 99m Tc-sodium pertechnate obtained using a generator

  4. Development of a Luminex Bead Based Assay for Diagnosis of Toxocariasis Using Recombinant Antigens Tc-CTL-1 and Tc-TES-26.

    Directory of Open Access Journals (Sweden)

    John P Anderson

    Full Text Available The clinical spectrum of human disease caused by the roundworms Toxocara canis and Toxocara cati ranges from visceral and ocular larva migrans to covert toxocariasis. The parasite is not typically recovered in affected tissues, so detection of parasite-specific antibodies is usually necessary for establishing a diagnosis. The most reliable immunodiagnostic methods use the Toxocara excretory-secretory antigens (TES-Ag in ELISA formats to detect Toxocara-specific antibodies. To eliminate the need for native parasite materials, we identified and purified immunodiagnostic antigens using 2D gel electrophoresis followed by electrospray ionization mass spectrometry. Three predominant immunoreactive proteins were found in the TES; all three had been previously described in the literature: Tc-CTL-1, Tc-TES-26, and Tc-MUC-3. We generated Escherichia coli expressed recombinant proteins for evaluation in Luminex based immunoassays. We were unable to produce a functional assay with the Tc-MUC-3 recombinant protein. Tc-CTL-1 and Tc-TES-26 were successfully coupled and tested using defined serum batteries. The use of both proteins together generated better results than if the proteins were used individually. The sensitivity and specificity of the assay for detecting visceral larval migrans using Tc-CTL-1 plus Tc-TES-26 was 99% and 94%, respectively; the sensitivity for detecting ocular larval migrans was 64%. The combined performance of the new assay was superior to the currently available EIA and could potentially be employed to replace current assays that rely on native TES-Ag.

  5. Immobilization of {sup 99}Tc (Re) using Iron-Phosphate Glasses

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Jong; Xu, Kai; Um, Woo Yong; Hrma, Pavel [Pohang Univ. of Science and Technology, Pohang (Korea, Republic of)

    2012-05-15

    Technetium-99 ({sup 99}Tc) is a fission product artificially generated during the irradiation of {sup 235}U for commercial power production or {sup 239}Pu for nuclear weapons. Under oxidizing conditions, the dominant species of Tc, the pertechnetate anion (TcO{sub 4} {sup -}), is highly soluble in ground water and thus easily transports through the geologic systems. In addition, because of its high fission yield ({approx}6 %) and long half-life (2.1x10{sup 5} yr), immobilization of {sup 99}Tc has been investigated for decades. Several waste forms such as metallic alloys, sintered titanate ceramics and chemically bonded phosphate ceramics have been proposed to encapsulate {sup 99}Tc. They have not yet been realized in the industrial-scale, mostly either due to the high volatilization of {sup 99}Tc during high temperature process (>1300 .deg. C), or the low {sup 99}Tc loading. Iron-phosphate (FeP) glasses have been developed as alternative waste forms because of their chemical durability equivalent to borosilicate glasses. Additionally, vitrification of radioactive waste by FeP glasses can be done at a relatively low temperature ({approx}1000 .deg. C) and the low-temperature process can reduce the volatilization of {sup 99}Tc significantly. Thus, this work reports the immobilization of {sup 99}Tc by FeP glasses using rhenium (Re) as a surrogate. We also examine the chemical durability of Re-containing FeP glasses using product consistency test (PCT). Experimental results reveal that FeP glass can become a promising candidate for immobilizing {sup 99}Tc

  6. Hydrogen-induced room-temperature plasticity in TC4 and TC21 alloys

    DEFF Research Database (Denmark)

    Yuan, Baoguo; Jin, Yongyue; Hong, Chuanshi

    2017-01-01

    In order to reveal the effect of hydrogen on the room-temperature plasticity of the titanium alloys TC4 and TC21, compression tests have been carried out at room temperature. Results show that an appropriate amount of hydrogen can improve the room-temperature plasticity of both the TC4 and TC21...... alloys. The ultimate compression strain of the TC4 alloy containing a hydrogen concentration of 0.5 wt.% increases by 39% compared to the untreated material. For the TC21 alloy the ultimate compression strain is increased by 33% at a hydrogen concentration of 0.6 wt.%. The main reason for the improvement...... of hydrogen-induced room-temperature plasticity of the TC4 and TC21 alloys is discussed....

  7. Microbial reduction of 99Tc (as TcO4-) in anaerobic alkaline conditions

    International Nuclear Information System (INIS)

    Khizhnyak, T.; Simonoff, M.; Sergeant, C.; Simonoff, G.; Medvedeva-Lyalikova, N.N.

    2003-01-01

    The ability of bacteria to reduce pertechnetate in alkaline conditions was investigated using halophilic bacteria isolated from soda-lakes environments. Anaerobic halophilic bacteria were able to reduce as much as 0.25 mM pertechnetate, whereas no reduction took place without bacteria or in the presence of heat-killed bacteria. The results obtained showed reduction of Tc(VII)O 4 - to the Tc(V) and Tc(IV) at pH 10 in the carbonate-bicarbonate medium. About 57% of the total technetium was determined to be Tc(IV), 1-3% as a Tc(V) and 17-20% as a Tc(VII) after 1-3 days of incubation with bacteria. The microbial reduction of Tc(VII) in alkaline conditions has been suggested as a potential mechanism for the removal of Tc from contaminated environments or waste streams. (author)

  8. Monitoring for 99Tc in borehole waters using an extraction chromatographic resin

    International Nuclear Information System (INIS)

    Davis, T.M.; Nelson, D.M.; Thompson, E.G.

    1993-01-01

    A technique using an extraction chromatographic resin for the analysis of 99 Tc in borehole waters is presented. The method involves one pass of the sample through two resins, a rinse of the resins, then counting of one of the resins by liquid scintillation counting. The technique is intended to be used as a screening method of 99 Tc. The procedure employs commercially available materials, generates little waste and requires very little operator time

  9. Using Tc-Re chemical analogy to synthesize and identify new 99mTc complexes

    International Nuclear Information System (INIS)

    Gambino, D.; Kremer, C.; Cartesio, S.; Leon, A.; Kremer, E.

    1989-01-01

    The strong chemical resemblance between Tc and Re is applied to design and evaluate experiments with 99m Tc complexes. A combination of spectrophotometric and electrophoretic techniques allows to propose the formula [TcO 2 (amine) 2 ] + for compounds prepared by reduction of 99m TcO 4 - with Zn (solid phase) in presence of several (bidentate) amines. (author) 10 refs.; 2 figs.; 4 tabs

  10. Superconductivity in the W-Tc and W2C-Tc systems

    International Nuclear Information System (INIS)

    Giorgi, A.L.

    1985-01-01

    A series of compositions in the W-Tc, W 2 C-Re and W 2 C-Tc systems were prepared and examined for superconductivity. The crystal structure, lattice parameters and superconducting transition temperatures of the W 2 C-Tc are reported for the first time. Similar measurements were made on the W-Tc and W 2 C-Re systems and the results compared with previous published results for these systems. 7 refs., 2 figs., 2 tabs

  11. Scavenging of Tc(V) formed by I.T. in 95mTcO4- solutions

    International Nuclear Information System (INIS)

    Ianoz, E.; Colin, M.; Kosinski, M.

    1988-01-01

    The chemical effects of the I.T. of 95m Tc in 95m TcO 4 - have been studied in chelating ligand solutions. At high pH and at high concentration of 1,4,8,11-tetraazacyclotetradecane and 1,4-dithia-8, 11-diazacyclotetradecane, the retention of 95g Tc is about 20% and the unretained 95g Tc appears preponderantly (ca. 73%) as [TcO 2 L] + complexes. In glucoheptonate solution, the 95g Tc retention remains practically the same (22%) but the unretained 95g Tc is found in high proportion (73%) as [TcObis(glucoheptonate)] - . The added ligands are very good scavengers for 95g Tc(V). A comparison is made between 95g Tc species formed by the I.T. in 95m TcO 4 - and 99m Tc species resulting from the chemical reduction of 99m TcO 4 - . (orig.)

  12. Solubility study of Tc(IV) oxides

    International Nuclear Information System (INIS)

    Liu, D.J.; Fan, X.H.

    2005-01-01

    The deep geological disposal of the high level radioactive wastes is expected to be a safer disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under oxidizing conditions technetium exists as the anionic species TcO 4 - whereas under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 ·nH 2 O. Hence, the mobility of Tc(IV) in reducing groundwater may be limited by the solubility of TcO 2 ·nH 2 O under these conditions. Due to this fact it is important to investigate the solubility of TcO 2 ·nH 2 O. The solubility determines the release of radionuclides from waste form and is used as a source term in radionuclide migration analysis in performance assessment of radioactive waste repository. Technetium oxide was prepared by reduction of a technetate solution with Sn 2 + . The solubility of Tc(IV) oxide has been determined in simulated groundwater and redistilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) oxide were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and redistilled water is about (1.49-1.86) x 10 -9 mol/(L·d) under aerobic conditions, but Tc(IV) in simulated groundwater and redistilled water is not oxidized under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) oxide in simulated groundwater and redistilled water is equal on the whole after centrifugation or ultrafiltration. The

  13. Separation of 99Tc from low level radioactive liquid waste using anion exchange resin

    International Nuclear Information System (INIS)

    Sonar, N.L.; Mittal, V.K.; Dhara, Amrita; Thakur, D.A.; Valsala, T.P.; Vishwaraj, I.

    2016-01-01

    Technetium-99 is one of the fission products with very high yield (∼6%) in thermal neutron induced fission of 235 U. 99 Tc exists as pertechnate ( 99 TcO 4 ) ion in reprocessing streams. The high solubility in water and high mobility of pertechnate ions, coupled with very high half life of 99 Tc (t1/2 = 2 × 105 y, âmax = 290 KeV) makes it a potential candidate for long term hazard to the environment. Major radionuclides present in the intermediate level waste (ILW) generated at reprocessing plant is conventionally treated by ion exchange method for removal of 137 Cs. The Low level effluent waste (LLW) from the IX column contains 99 Tc as a major isotope. Though the concentration of 99 Tc in the waste is in ppm level, the presence of molar level of competing nitrates makes its separation very difficult. Many efforts have been reported on selective separation of 99 Tc from various waste streams. In this paper, separation of 99 Tc from ion exchange column effluent waste stream using selected commercially available anion exchange resins has been detailed

  14. Desarrollo de técnicas de extracción y análisis de antocianinas y compuestos fenólicos en Jaboticaba (Myrciaria Cauliflora)

    OpenAIRE

    Mera Morillo, Celia

    2015-01-01

    Desarrollo de técnicas de extracción mediante ultrasonidos y mediante fluidos presurizados para así, obtener las condiciones óptimas de extracción de las antocianinas mayoritarias y compuestos fenólicos totales presentes en la jaboticaba

  15. Assessment of the direct cyclotron production of (99m)Tc: An approach to crisis management of (99m)Tc shortage.

    Science.gov (United States)

    Rovais, Mohammad Reza Aboudzadeh; Aardaneh, Khosro; Aslani, Gholamreza; Rahiminejad, Ali; Yousefi, Kamran; Boulouri, Fatemeh

    2016-06-01

    Nowadays, the cyclotron production of technetium-99m ((99m)Tc) has been increased, due to the worldwide (99m)Tc generator shortage. In the present work, an improved strategy for the production of (99m)Tc, using the proton irradiation of the enriched (100)Mo was developed. The performance of this method in terms of the production yield, chemical purity, radiochemical purity, as well as radionuclide purity was evaluated. The average production yield was measured to be 356MBqμA(-1)h(-1). A good agreement was found between the calculated production yield and the experimental one. The radiochemical separation and total recovery yields of (99m)Tc were 92% and 69%, respectively. The radiochemical and the radionuclide purities of the (99m)Tc were 99% and >99.99% at the end of purification, respectively. The results of quality control tests (QC) support the concept that cyclotron-produced (99m)Tc is suitable for preparation of USP-compliant. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Oxidative dissolution potential of biogenic and abiogenic TcO2 in subsurface sediments

    International Nuclear Information System (INIS)

    Fredrickson, J.K.; Zachara, J.M.; Plymale, A.E.; Heald, S.M.; McKinley, J.P.; Kennedy, D.W.; Liu, C.; Nachimuthu, P.

    2009-01-01

    Technetium-99 (Tc) is an important fission product contaminant associated with sites of nuclear fuels reprocessing and geologic nuclear waste disposal. Tc is highly mobile in its most oxidized state (Tc(VII)O 4 - ) and less mobile in the reduced form (Tc(IV)O 2 · nH 2 O). Here we investigate the potential for oxidation of Tc(IV) that was heterogeneously reduced by reaction with biogenic Fe(II) in two sediments differing in mineralogy and aggregation state; unconsolidated Pliocene-age fluvial sediment from the upper Ringold (RG) Formation at the Hanford Site and a clay-rich saprolite from the Field Research Center (FRC) background site on the Oak Ridge Site. Both sediments contained Fe(III) and Mn(III/IV) as redox active phases, but FRC also contained mass-dominant Fe-phyllosilicates of different types. Shewanella putrefaciens CN32 reduced Mn(III/IV) oxides and generated Fe(II) that was reactive with Tc(VII) in heat-killed, bioreduced sediment. After bioreduction and heat-killing, biogenic Fe(II) in the FRC exceeded that in RG by a factor of two. More rapid reduction rates were observed in the RG that had lower biogenic Fe(II), and less particle aggregation. EXAFS measurements indicated that the primary reduction product was a TcO 2 -like phase in both sediments. The biogenic redox product Tc(IV) oxidized rapidly and completely in RG when contacted with air. Oxidation, in contrast, was slow and incomplete in the FRC, in spite of similar molecular scale speciation of Tc compared to RG. X-ray microprobe, electron microprobe, X-ray absorption spectroscopy, and micro X-ray diffraction were applied to the whole sediment and isolated Tc-containing particles. These analyses revealed that non-oxidizable Tc(IV) in the FRC existed as complexes with octahedral Fe(III) within intra-grain domains of 50-100 (micro)m-sized, Fe-containing micas presumptively identified as celadonite. The markedly slower oxidation rates in FRC as compared to RG were attributed to mass

  17. Oxidative dissolution potential of biogenic and abiogenic TcO 2 in subsurface sediments

    Science.gov (United States)

    Fredrickson, James K.; Zachara, John M.; Plymale, Andrew E.; Heald, Steve M.; McKinley, James P.; Kennedy, David W.; Liu, Chongxuan; Nachimuthu, Ponnusamy

    2009-04-01

    Technetium-99 (Tc) is an important fission product contaminant associated with sites of nuclear fuels reprocessing and geologic nuclear waste disposal. Tc is highly mobile in its most oxidized state [Tc(VII)O4-] and less mobile in the reduced form [Tc(IV)O 2· nH 2O]. Here we investigate the potential for oxidation of Tc(IV) that was heterogeneously reduced by reaction with biogenic Fe(II) in two sediments differing in mineralogy and aggregation state; unconsolidated Pliocene-age fluvial sediment from the upper Ringold (RG) Formation at the Hanford Site and a clay-rich saprolite from the Field Research Center (FRC) background site on the Oak Ridge Site. Both sediments contained Fe(III) and Mn(III/IV) as redox active phases, but FRC also contained mass-dominant Fe-phyllosilicates of different types. Shewanella putrefaciens CN32 reduced Mn(III/IV) oxides and generated Fe(II) that was reactive with Tc(VII) in heat-killed, bioreduced sediment. After bioreduction and heat-killing, biogenic Fe(II) in the FRC exceeded that in RG by a factor of two. More rapid reduction rates were observed in the RG that had lower biogenic Fe(II), and less particle aggregation. EXAFS measurements indicated that the primary reduction product was a TcO 2-like phase in both sediments. The biogenic redox product Tc(IV) oxidized rapidly and completely in RG when contacted with air. Oxidation, in contrast, was slow and incomplete in the FRC, in spite of similar molecular scale speciation of Tc compared to RG. X-ray microprobe, electron microprobe, X-ray absorption spectroscopy, and micro X-ray diffraction were applied to the whole sediment and isolated Tc-containing particles. These analyses revealed that non-oxidizable Tc(IV) in the FRC existed as complexes with octahedral Fe(III) within intra-grain domains of 50-100 μm-sized, Fe-containing micas presumptively identified as celadonite. The markedly slower oxidation rates in FRC as compared to RG were attributed to mass

  18. Biodegradación de compuestos fenólicos del alpechín con Aspergillus terreus

    Directory of Open Access Journals (Sweden)

    García Paeja, María P.

    1992-04-01

    Full Text Available Olive mill wastewater degradation by Aspergillus terreus and under aerobic conditions at 28°C, was measured by the parameter of phenol content. We have explored the effect of different concentrations of olive mill wastewater upon the activity of Aspergillus terreus. Through HPLC, 10 phenol compounds (90% of the total phenolic content of the olive mill wastewater were identified.Se estudia la degradación de alpechines con Aspergillus terreus en condiciones de aerobiosis y temperatura de 28°C, utilizando como parámetro el contenido fenólico. Se analiza el efecto de la concentración de alpechín con Aspergillus terreus utilizando el mismo parámetro. Se han identificado por cromatografía líquida de alta eficacia (CLAE 10 compuestos fenólicos que suponen el 90% del total del alpechín.

  19. DETERMINACIÓN DE ÁCIDOS GRASOS Y COMPUESTOS TRITERPENOIDES DEL CUERPO FRUCTIFERO DE Suillus luteus.

    Directory of Open Access Journals (Sweden)

    Ivonne Nieto

    2009-04-01

    Full Text Available Normal 0 21 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Del cuerpo fructífero de Suillus luteus se extrajeron e identificaron, con base en el análisis de sus espectros de masas,  dieciséis compuestos, los cuales corresponden al ácido palmítico, oléico, linolénico y linoléico, octadecanoato de etilo, ergosta-7,22-dien-3β-ol, ergosta-7-en-3β-ol, estigmasterol, ergosta-3,5,7,9(11,22-pentaeno, ergosta-2,5,7,9(11,14,22-hexaeno, 23-metil-estigmast-3,5,7,22-tetraeno, 23-metil-estigmast-3,5,7,9(11,22-pentaeno, ergosta-4,6,15(16,22-tetraen-3-ona,  ergosta-1,5,7,9(11,22-pentaen-3-ona, ergosta-5,7,9(11,22-tetraen-3β-ol y ergosta-5,6,7-trihidroxi-7,22-dien-3β-ol. Siendo este un hongo tan poco estudiado, todos los compuestos, a excepción de los ácidos grasos, se reportan aquí por primera vez.

  20. Volatile organic compound (VOC) determination in working atmospheres; Determinacion de compuestos organicos volatiles (VOC) en ambiente laboral

    Energy Technology Data Exchange (ETDEWEB)

    Blass A, Georgina; Panama T, Luz A; Corrales C, Deyanira [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2003-07-01

    The present work describes, in a synthesized way, the implementation and application of procedures based on the normativity related to the subject of the volatile organic compounds (Volatile Organic Compounds VOC), that allow to sample, quantify and evaluate the present contamination in the working atmosphere of a refinery due to the fugitive emissions of VOC and other substances. In accordance with the corresponding normativity, more than 189 organic compounds denominated dangerous air polluting agents (Hazardous Air Pollutants, HAP) can be found in a working atmosphere, but they are the 11 main HAP that can be found in a refinery. In the present article the work made for the sampling and quantification of 5 of the 11 dangerous polluting agents of the air: benzene, toluene, xylene, iso-octane and naphthalene. [Spanish] El presente trabajo describe, de manera sintetizada, la implementacion y aplicacion de procedimientos basados en la normatividad relacionada al tema de los compuestos organicos volatiles (Volatil Organic Compounds, VOC), que permiten muestrear, cuantificar y evaluar la contaminacion presente en el ambiente laboral de una refineria debido a las emisiones fugitivas de VOC y otras sustancias. De acuerdo con la normatividad correspondiente, mas de 189 compuestos organicos denominados contaminantes peligrosos del aire (Hazardous Air Pollutants, HAP), pueden ser encontrados en un ambiente laboral, pero son 11 los principales HAP que pueden ser hallados en una refineria. En el presente articulo se informa el trabajo realizado para el muestreo y cuantificacion de 5 de los 11 contaminantes peligrosos del aire: benceno, tolueno, xileno, iso-octano y naftaleno.

  1. A novel electrochemical technique for the production of clinical grade 99mTc using (n, γ)99Mo

    International Nuclear Information System (INIS)

    Chakravarty, Rubel; Dash, Ashutosh; Venkatesh, Meera

    2010-01-01

    Introduction: In order to meet the growing demand for 99m Tc and to reduce the reliance on fission-produced 99 Mo, an electrochemical pathway for accessing 99m Tc through the (n, γ) 99 Mo was explored as a back-up measure and to supplement 99m Tc supply for radiopharmaceuticals application. Methods: 99m Tc from an equilibrium mixture of 99 Mo/ 99m Tc was selectively deposited on a platinum cathode in an electrochemical cell by applying optimal voltage and stripped back again into the 0.9% saline solution. The radiochemical and radionuclidic purity of the product were determined using standard techniques. 99m Tc thus obtained was used for labeling standard ligands such as dimercaptosuccinic acid (DMSA) and ethylene dicysteine (EC), to ascertain the usability. Results: Selective deposition of 99m Tc on the platinum electrode was achieved at a potential of 5 V over a period of 1 h in NaOH electrobath. The overall yield of 99m Tc was >90%, with >99.99% radionuclidic purity and >99% radiochemical purity. The performance of the generator remained consistent over a period of 10 days. The compatibility of the product in the preparation of 99m Tc-labeled formulations such as 99m Tc-DMSA and 99m Tc-EC was found to be satisfactory in terms of high labeling yields (>98%). Conclusion: A novel and attractive method has been developed to obtain highly concentrated 99m Tc, without using fission-produced 99 Mo.

  2. EVALUACIÓN HISTOLÓGICA DE BIOCOMPATIBILIDAD Y BIOCONDUCCIÓN DEL COMPUESTO HIDROXIAPATITA - LIGNINA IMPLANTADO EN TIBIA DE CONEJOS

    Directory of Open Access Journals (Sweden)

    Marlene Vargas V

    2009-04-01

    Full Text Available Objetivo. Evaluar histologicamente la biocompatibilidad y propiedad óseoconductora del compuesto de hidroxiapatita - lignina implantado en tibias de conejos. Material y métodos. Se utilizaron 20 conejos de raza nueva Zelanda, en cada uno, la tibia izquierda fue tratada con el compuesto y la tibia derecha no fue tratada y sirvió como control. Con la ayuda de taladro manual y una broca se realizó un defecto óseo de aproximadamente 4 mm de diámetro en la superficie lateral proximal tibial, hasta alcanzar el canal medular. Dos comprimidos del compuesto (400 mg, se utilizaron para rellenar el defecto. El mismo procedimiento quirúrgico se realizó en el grupo control, sin la utilización del compuesto. Las evaluaciones histológicas se realizaron a los 8, 30, 60, 90 y 120 días postcirugía, para lo que fue necesaria la eutanasia de 4 animales por fecha de evaluación. Resultados. En las evaluaciones de 30, 60, 90 y 120 días se observó una formación ósea más acelerada y extensa en el grupo tratado al compararse las lecturas histológicas con el grupo control. Conclusiones. El compuesto hidroxiapatita-lignina permitió el crecimiento de tejido óseo desde los bordes hasta el centro del defecto a un ritmo de crecimiento mayor, con formación de hueso mas organizado que en el grupo control. Además se observó su integración al tejido óseo; lo que sugiere su biocompatibilidad y propiedad óseoconductora, hecho que permite recomendarlo como substituto.

  3. ANÁLISIS DEL PERFIL DE COMPUESTOS VOLÁTILES DEL MANGO (Mangifera indica L. Var. Tommy Atkins TRATADO POR MÉTODOS COMBINADOS

    Directory of Open Access Journals (Sweden)

    Angélica Moreno

    2010-09-01

    Full Text Available Se evaluó el perfil de compuestos volátiles del mango (Mangifera indica L. Var. Tommy Atkins al ser tratado con la combinación de los métodos de deshidratación osmótica con o sin pulso de vacío (DOPV y DO y con secado por aire caliente o con vacío (SAC y VAC. El tiempo utilizado en la cinética del proceso de DO fue de 42 horas y la DOPV de 30 horas; en los procesos de secado, el SAC se realizó durante 24 horas y el VAC requirió 40 horas. En el perfil de compuestos volátiles del mango fresco analizado por cromatografía de gases acoplada a detector de espectrometría de masas (GC-MS se encontraron compuestos tipo mono y sesquiterpénico, además de ácidos y ésteres grasos. El germacreno D (20,49% fue el compuesto terpénico de mayor abundancia encontrado en el análisis realizado. La cantidad de compuestos volátiles en la fruta procesada fue afectada por la aplicación de DOPV y VAC; sin embargo estas pérdidas fueron menores que en las muestras secadas sin pretratamiento osmótico. En el análisis sensorial realizado, las frutas tratadas con DOPV y DO presentaron una menor intensidad calificada en el olor en comparación con la muestra no pretratada.

  4. Study of {sup 99m}Tc-DMSA biodistribution in experimental animals

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Thais O.M. de; Silva, Natanael G. da; Colturato, Maria T.; Felgueiras, Carlos F.; Mengatti, Jair; Fukumori, Neuza T.O.; Matsuda, Margareth M.N.; Araújo, Elaine B. de, E-mail: thais.castrom@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Radiofarmacia

    2017-11-01

    {sup 99m}Tc-DMSA, succimer ({sup 99m}Tc), is a radiopharmaceutical commonly used in nuclear medicine for renal function evaluation by imaging. In order to achieve adequate labeling of the product with good radiochemical yield and standardized biological distribution, the interval of 185 - 3700 MBq should be kept in a maximum volume of 3 mL for product labeling. Moreover, one should avoid exposing the reconstituted solution to oxygen and using the product after four hours post labeling. The aim of the study was to quantify and evaluate the influence of different DMSA complexes on biological distribution of the radiopharmaceutical in experimental animals, taking in account variations in the labeling parameters. Radiochemical purity was determined by paper and thin layer chromatography using both acetone/Whatman 3MM, 0.9% NaCl/TLC-SG and n-propanol/ H{sub 2}O/acetic acid (4:3:1 V/V/V)/TLC-SG systems respectively for quantification of {sup 99m}TcO{sub 4} - and {sup 99m}TcO{sub 2} plus some {sup 99m}Tc-DMSA complexes. The labeling activity did not significantly affect the extent of the main complex generation. The presence of oxygen and the concentration of {sup 99}Tc did not markedly change the percentage of the radiochemical impurities in the preparation. Radiochemical purity tests of the DMSA-{sup 99m}Tc based on IPEN-CNEN DMSA-TEC reagent and on another producer's reagent showed similar results. Although the routine method used by IPEN-CNEN to determine the radiochemical yield of {sup 99m}Tc-DMSA was not able to discriminate among {sup 99m}Tc-DMSA complexes, the renal uptake and the kidney to liver plus spleen uptake ratio in rats met the official compendia criteria for the radiopharmaceutical. (author)

  5. Study of "9"9"mTc-DMSA biodistribution in experimental animals

    International Nuclear Information System (INIS)

    Castro, Thais O.M. de; Silva, Natanael G. da; Colturato, Maria T.; Felgueiras, Carlos F.; Mengatti, Jair; Fukumori, Neuza T.O.; Matsuda, Margareth M.N.; Araújo, Elaine B. de

    2017-01-01

    "9"9"mTc-DMSA, succimer ("9"9"mTc), is a radiopharmaceutical commonly used in nuclear medicine for renal function evaluation by imaging. In order to achieve adequate labeling of the product with good radiochemical yield and standardized biological distribution, the interval of 185 - 3700 MBq should be kept in a maximum volume of 3 mL for product labeling. Moreover, one should avoid exposing the reconstituted solution to oxygen and using the product after four hours post labeling. The aim of the study was to quantify and evaluate the influence of different DMSA complexes on biological distribution of the radiopharmaceutical in experimental animals, taking in account variations in the labeling parameters. Radiochemical purity was determined by paper and thin layer chromatography using both acetone/Whatman 3MM, 0.9% NaCl/TLC-SG and n-propanol/ H_2O/acetic acid (4:3:1 V/V/V)/TLC-SG systems respectively for quantification of "9"9"mTcO_4 - and "9"9"mTcO_2 plus some "9"9"mTc-DMSA complexes. The labeling activity did not significantly affect the extent of the main complex generation. The presence of oxygen and the concentration of "9"9Tc did not markedly change the percentage of the radiochemical impurities in the preparation. Radiochemical purity tests of the DMSA-"9"9"mTc based on IPEN-CNEN DMSA-TEC reagent and on another producer's reagent showed similar results. Although the routine method used by IPEN-CNEN to determine the radiochemical yield of "9"9"mTc-DMSA was not able to discriminate among "9"9"mTc-DMSA complexes, the renal uptake and the kidney to liver plus spleen uptake ratio in rats met the official compendia criteria for the radiopharmaceutical. (author)

  6. Accumulation, elimination and retention of 99Tc by duckweed

    International Nuclear Information System (INIS)

    Hattink, J.; Weltje, L.; Wolterbeek, H.Th.; Goeij, J.J.M. de

    2004-01-01

    Accumulation dynamics of the long-lived fission product technetium ( 99 Tc) in duckweed is studied. Duckweed serves as model for aquatic plants, because of its representative foliar uptake for 99 Tc. 99 Tc is irreversibly accumulated and distributed over cytoplasm, chloroplasts and mitochondria. Autoradiography showed that 99 Tc was not transported to new biomass. Irreversible storage of 99 Tc in plant biomass means that steady-state situations cannot be interpreted as a balance between uptake and elimination of 99 Tc, but that 99 Tc continuously builds up in each single duckweed plant and overall Tc concentrations are averaged over new biomass. (author)

  7. Thiolato-technetium complexes. 5. Synthesis, characterization, and electrochemical properties of bis(o-phenylenebis(dimethylarsine))technetium(II) and -technetium(III) complexes with thiolato ligands. Single-crystal structural analyses of trans-[Tc(SCH3)2(DIARS)2]PF6 and trans-[Tc(SC6H5)2(DIARS)2]0

    International Nuclear Information System (INIS)

    Konno, Takumi; Heineman, W.R.; Deutsch, E.; Kirchhoff, J.R.; Heeg, M.J.; Stuckey, J.A.

    1992-01-01

    Three different thiols have been brought into reaction with trans-[Tc(OH)(O)(DIARS) 2 ] 2+ to produce initially the Tc(II) complex, [Tc(SR) 2 (DIARS) 2 ] 0 , which can be oxidized to the Tc(III) complex, [Tc(SR) 2 (DIARS) 2 ] + (DIARS = o-phenylenebis(dimethylarsine)). In the case of SR = SCH 3 and SCH 2 C 6 H 5 , the Tc(II) and Tc(III) products were found to be in the trans geometry, while for SR = SC 6 H 5 , both cis and trans isomers were generated. Two of the complexes were structurally characterized by X-ray diffraction. trans-[Tc(SCH 3 ) 2 (DIARS) 2 ]PF 6 , chemical formula TcAs 4 S 2 PF 6 C 22 H 38 , crystallizes in the monoclinic space group. The Tc atom occupies an inversion center. Representative elemental analyses, FAB mass spectra, and visible-UV spectra are reported. Electrochemical and spectroelectrochemical measurements were taken on trans-[Tc(SCH 3 ) 2 (DIARS) 2 ] + , trans-[Tc(SCH 2 C 6 H 5 ) 2 (DIARS) 2 ] + , and cis-[Tc(SC 6 H 5 ) 2 (DIARS) 2 ] + , which exhibit a reversible Tc(III/II) redox couple in the range -0.32 to -0.47 V vs. Ag/AgCl. Another redox couple is present in the range -1.22 to -1.70 V; this is ascribed to Tc(II/I) and is reversible only for SR = SCH 2 C 6 H 5 at 20C. At room temperature, chemically irreversible couples are exhibited at ca. +1.0 V for Tc(IV/III)

  8. Development of more efficacious Tc-99m organ imaging agents for use in nuclear medicine by analytical characterization of radiopharmaceutical mixtures. Progress report, May 1, 1981-April 30, 1982

    International Nuclear Information System (INIS)

    Heineman, W.R.; Deutsch, E.A.

    1981-12-01

    The objectives of this year's research were to develop a method for rapidly determining TcO 4 - in 99 Mo//sup 99m/Tc generator eluates, to improve the ability to chromatographically determine individual Tc-HEDP complexes in radiopharmaceuticals, and to investigate the effects of TcO 4 - concentration and electrochemical reduction on the types and relative amounts of Tc-HEDP complexes present in a radiopharmaceutical formulation. A rapid and sensitive high performance liquid chromatographic (HPLC) method for the quantitative determination of pertechnetate (TcO 4 - ) was developed. This HPLC-based analysis may be of considerable utility in assessing the history and function of 99 MO/sup 99m/Tc generators as well as in the routine analysis of reduced technetium radiopharmaceuticals for the presence of undesired TcO 4 - . Encouraging results were obtained on a dimethyl amine column using aqueous (NH 4 ) 2 SO 4 as the mobile phase. The preparation of Tc(NaBH 4 ) HEDP radiopharmaceutical analogues using varying concentrations of total TcO 4 - shows a dramatic effect in the number and distribution of Tc-HEDP complexes over a TcO 4 - concentration range of 10 -2 to 10 -8 M. These results suggest that total TcO 4 - concentration is an important parameter to be considered in the preparation of a specific Tc-HEDP complex to improve skeletal imaging. The preparation of Tc(electrode) HEDP radiopharmaceutical analogues by using electrochemical reduction was explored. The resulting solutions contain Tc-HEDP complexes that are tentatively identified as being the same complexes formed by NaBH 4 reduction, although the relative concentrations of these complexes are quite different with the two modes of reduction. Thus, electrochemical reduction shows promise as a viable route to the preparation of specific Tc-HEDP complexes for improved skeletal imaging

  9. On the interaction of granite with Tc(IV) and Tc(VII) in aqueous solution

    International Nuclear Information System (INIS)

    Eriksen, T.E.; Cui, Daquing

    1991-10-01

    The behaviour of technetium in granite-groundwater systems under reducing conditions was investigated. The anion TcO 4 - was reduced to Tc(IV) and simultaneously precipitated as TcO 2 xnH 2 O on the granite surfaces. The electron sources are assumed to be iron oxides and/or iron containing minerals in the granite. The technetium concentration in ground water under repository conditions may be predicted assuming TcO 2 xnH 2 O as the solid phase and TcO(OH) 2 0 and TcO 4 - as the predominant aqueous complexes using a formation constant for TcO(OH) 2 0 of log K = -8.16 and a standard reduction potential E 0 for the reaction TcO 4 - + 3e - + 4H + = TcO 2 xnH 2 O of 0.738 V. The surface related distribution ratio K a for TcO(OH) 2 0 between Stripa granite and ground water is approximately 1 cm based on geometrical surface area. (au)

  10. Olanzapine induced Q-Tc shortening.

    Science.gov (United States)

    Shoja Shafti, Saeed; Fallah Jahromi, Parisa

    2014-12-01

    Prolongation of Q-Tc interval is commonly accepted as a surrogate marker for the ability of a drug to cause torsade de pointes. In the present study, safety of olanzapine versus risperidone was compared among a group of patients with schizophrenia to see the frequency of the electrocardiographic alterations induced by those atypical antipsychotics. Two hundred and sixty-eight female inpatients with schizophrenia entered in one of the two parallel groups to participate in an open study for random assignment to olanzapine (n = 148) or risperidone (n = 120). Standard 12-lead surface electrocardiogram (ECG) was taken from each patient at baseline, before initiation of treatment, and then at the end of management, just before discharge. The parameters that were assessed included heart rate (HR), P-R interval, QRS interval, Q-T interval (corrected = Q-Tc), ventricular activation time (VAT), ST segment, T wave, axis of QRS, and finally, interventricular conduction process. A total of 37.83% of cases in the olanzapine group and 30% in the risperidone group showed some Q-Tc changes; 13.51% and 24.32% of the patients in the olanzapine group showed prolongation and shortening of the Q-Tc, respectively, while changes in the risperidone group were restricted to only prolongation of Q-Tc. Comparison of means showed a significant increment in Q-Tc by risperidone (p = 0.02). Also, comparison of proportions in the olanzapine group showed significantly more cases with shortening of Q-Tc versus its prolongation (p = 0.01). No significant alterations with respect to other variables were evident. Olanzapine and risperidone had comparable potentiality for induction of Q-Tc changes, while production of further miscellaneous alterations in ECG was more observable in the olanzapine group compared with the risperidone group. Also shortening of Q-Tc was specific to olanzapine.

  11. sup(99m)Tc-2-mercaptopropionylglycine

    International Nuclear Information System (INIS)

    Saji, Hideo; Odori, Teruo; Morita, Rikushi; Yokoyama, Akira; Tanaka, Hisashi.

    1979-01-01

    Labeling of 2-mercaptopropionylglycine (2-MPG) with sup(99m)Tc, was studied and its chemical characteristics were examined. Further, biliary excretion behavior of this complex was comparatively estimated in mice, rats and rabbits. sup(99m)Tc-2-MPG was rapidly excreted in large quantities into the bile in mice and rats: within 1 hr after injection, 51% of the injected dose was recovered from the bile in rats. On the other hand, the ligand exchange reaction between this complex and penicillamine indicates that a low hydrolyzed sup(99m)Tc species is coordinated with 2-MPG. These results suggest that a low hydrolyzed sup(99m)Tc state is an effective feature in biliary excretion behavior of sup(99m)Tc compounds. Another interesting in vivo behavior of sup(99m)Tc-2-MPG is the difference observed in mice and rabbits: in mice, very high sup(99m)Tc activity is concentrated in the gallbladder and the clearance from tissues other than the gallbladder is rapid, whereas in rabbits, although a rapid and high excretion into the gallbladder is observed, a considerable high sup(99m)Tc activity is retained in the liver and the kidney. One reason for this different in vivo behavior is the low stability of this complex at high dilution: a big animal has the large dilution volume which lead to higher decomposition estimated by the higher liver and kidney retention or the lower bile excretion. In conclusion, studies carried on sup(99m)Tc-2-MPG showed a good biliary excretion behavior but an in vivo unstableness in big animals. (author)

  12. High Tc superconducting energy storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Werfel, Frank [Adelwitz Technologiezentrum GmbH (ATZ), Arzberg-Adelwitz (Germany)

    2012-07-01

    Electric energy is basic to heat and light our homes, to power our businesses and to transport people and goods. Powerful storage techniques like SMES, Flywheel, Super Capacitor, and Redox - Flow batteries are needed to increase the overall efficiency, stability and quality of electrical grids. High-Tc superconductors (HTS) possess superior physical and technical properties and can contribute in reducing the dissipation and losses in electric machines as motors and generators, in electric grids and transportation. The renewable energy sources as solar, wind energy and biomass will require energy storage systems even more as a key technology. We survey the physics and the technology status of superconducting flywheel energy storage (FESS) and magnetic energy storage systems (SMES) for their potential of large-scale commercialization. We report about a 10 kWh / 250 kW flywheel with magnetic stabilization of the rotor. The progress of HTS conductor science and technological engineering are basic for larger SMES developments. The performance of superconducting storage systems is reviewed and compared. We conclude that a broad range of intensive research and development in energy storage is urgently needed to produce technological options that can allow both climate stabilization and economic development.

  13. Solubility of Tc(IV) oxides

    International Nuclear Information System (INIS)

    Liu, D.J.; Fan, X.H.

    2005-01-01

    Full text of publication follows: The deep geological disposal of the high level radioactive wastes is expected to be a safer disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 .nH 2 O. The solubility of Tc(IV) is used as a source term in performance assessment of radioactive waste repository. Technetium oxide was prepared by reduction of a technetate solution with Sn 2+ . The solubility of Tc(IV) oxide has been determined in simulated groundwater and re-distilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) oxide were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and re-distilled water is about (1.49∼1.86) x 10 -9 mol/(L.d) under aerobic conditions, but Tc(IV) in simulated groundwater and re-distilled water is not oxidized under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) oxide in simulated groundwater and re-distilled water is equal on the whole after centrifugation or ultrafiltration. The solubility of Tc(IV) oxide decreases with the increase of pH at pH 10 and is pH independent in the range 2 -8 to 10 -9 mol/L at 2 3 2- concentration. These data could be used to estimate the Tc(IV) solubility for cases where solubility limits transport of technetium in reducing environments of high-level waste repositories. (authors)

  14. Reliability optimization in compound electric power systems with the aid of evolutionary algorithms; Optimizacion de la confiabilidad en sistemas electricos de potencia compuestos utilizando algoritmos evolucionarios

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Hernandez, Jose Alberto

    2001-11-15

    The purpose of evaluating the reliability of Electric Power Systems is to estimate the ability of the system to carry out their function of taking the energy from the generating stations to the load points. This involves the reliability of generation sources and transmission that affect in the transfer of power through the transmission system that bears load loss and voltage sags between the generation and the consumption centers. In this thesis a hybrid methodology that optimize the reliability in systems generation -transmission using evolutionary algorithms is developed. This technique of optimization determines the optimum number of components (parallel redundancy in lines) and shunt compensation in load nodes necessary to maximize reliability, subject to cost restrictions, and considering security conditions in steady state, using the smallest singular value technique. The objective function will be defined as stochastic function, where the measure of interests is the smallest singular value of the Jacobian matrix of power flows solution of the most severe event according to the evaluation of reliability of the generation transmission system, this formulation is a combination of integer and continuous non linear programming, where the conventional mathematical programming algorithms present difficulties in robustness and global optimal search. The fault in generation units is determined by using the state sampling together with the transmission system by Monte Carlo simulation for a desired load level. For events where violations in security exist (lines loading, violation in voltage in load nodes and violation in reactive power of generation nodes) a model of active and reactive power dispatch is used in order to correct these violations by means of the exact penalty function linear programming technique to proceeded to determine the stability of voltage in steady state by means of the smallest singular value technique and the participation factors of nodes

  15. A system for routine production of 99mTc by thermal separation technique

    International Nuclear Information System (INIS)

    Sahm, U.; Helus, F.; Krauss, O.; Baier-Borst, W.

    1976-01-01

    Technetium-99m is one of the most widely used radionuclides in diagnostic medicine, and it is a general opinion that 99m Tc and the radiopharmaceuticals obtained from it will be used for a long time. 99m Tc has convenient physical and biological parameters for clinical applications. 99m Tc is formed by the beta decay from its 99 Mo parent. 99 Mo is produced by neutron irradiation of natural Mo or enriched 98 Mo, or as a fission product of 235 U. A third approach is cyclotron production of 99 Mo by proton bombardment of enriched 100 Mo over 100 Mo(p,pn) 99 Mo reaction. The most common method of separating 99m Tc from its 99 Mo parent is the elution of 99m Tc with normal saline from an aluminum oxide column containing adsorbed 99 Mo. The second method is solvent extraction using methylethylketon. The sublimation method is based on different volatility of MoO 3 and Tc 2 O 7 . Previously the development of a practical sublimation generator has been studied and some of them have been used routinely. As a reactor and cyclotron owner we have examined the possibility of producing our own 99m Tc with the aim of being independent from supplier and transportation problems. We have studied the separation of 99m Tc with the aim of being independent from supplier and transportation problems. We have studied the separation of 99m Tc from MoO 3 by complete distillation of gram amounts of natural MoO 3 or enriched 98 MoO 3 irradiated in reactor. The principle of the described method is based on the complete evaporation of MoO 3 and Tc 2 O 7 oxides and its following fractionated condensation. To realize this idea, two different generator systems for repeated multiple separation were developed and studied. The first based on using a two-oven technique. A quartz apparatus is placed in two ovens which are situated side by side and heated to different temperatures. Sweeping gas carries irradiated 99 MoO 3 from a middle part of the first oven heated to a higher temperature (1100 deg. C

  16. Power Systems Development Facility Gasification Test Campaing TC18

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2005-08-31

    In support of technology development to utilize coal for efficient, affordable, and environmentally clean power generation, the Power Systems Development Facility (PSDF) located in Wilsonville, Alabama, routinely demonstrates gasification technologies using various types of coals. The PSDF is an engineering scale demonstration of key features of advanced coal-fired power systems, including a KBR Transport Gasifier, a hot gas particulate control device (PCD), advanced syngas cleanup systems, and high pressure solids handling systems. This report details Test Campaign TC18 of the PSDF gasification process. Test campaign TC18 began on June 23, 2005, and ended on August 22, 2005, with the gasifier train accumulating 1,342 hours of operation using Powder River Basin (PRB) subbituminous coal. Some of the testing conducted included commissioning of a new recycle syngas compressor for gasifier aeration, evaluation of PCD filter elements and failsafes, testing of gas cleanup technologies, and further evaluation of solids handling equipment. At the conclusion of TC18, the PSDF gasification process had been operated for more than 7,750 hours.

  17. Tc99m-sestamibi dosimetry in myocardial perfusion imaging

    International Nuclear Information System (INIS)

    Toledo, Janine M.; Trindade, Bruno M.; Campos, Tarcisio P.R.

    2015-01-01

    This paper addressed myocardial perfusion imaging providing a spatial dosimetric investigation of the 99m Tc-radiopharmaceutical dose distribution at the myocardium. Radiological data manipulation was performed in order to create a computational voxel model of the heart. A set of images obtained by thoracic angiotomography and abdominal aorta was set up providing anatomic and functional information for heart modeling in SISCODES code. A homogeneous distribution of 99m Tc was assumed into the cardiac muscle. Simulations of the transport of particles through the voxel and the interaction with the heart tissues were performed on the MCNP - Monte Carlo Code. The spatial dose distribution in the heart model is displayed as well as the dose versus volume histogram of the heart muscle. The present computational tools can generate spatial doses distribution in myocardial perfusion imaging. Specially, the dosimetry performed elucidates imparted dose distribution in the myocardial muscle per unit of injected 99m Tc activity, which can contribute to future deterministic effect investigations. (author)

  18. Diagnostic and Therapeutic RI Generators

    International Nuclear Information System (INIS)

    Lee, Jong-Sup; Lee, Jun-Sig; Park, Ul-Jae; Han, Hyon-Soo

    2006-01-01

    Different types of generators have been developed for the convenient use of 99m Tc as the demand for this radioisotope is strong. Currently, the demand for 99m Tc is more than 80 % of the total demand for medical isotopes in the world. A 99m Tc generator, in general, is composed of a column packed with ceramic adsorbent, tubing, eluent reservoir or vials, collection vials, and shielding. The key technology to develop a good generator is how to load 99 Mo as much as possible while maintaining the quality of eluted 99 mTc as good as possible. The technology is well developed and already available commercially for the case of the fission 99 Mo/ 99 mTc because loading of few curries of 99 Mo on a conventional adsorbent, i.e. alumina is not a serious task in the chemical point of view. However, the current infrastructure of the supply of 99 Mo to the world market is sturdy as the research reactors are getting aged. In this regard, alternative research activities to develop generators with (n,γ) 99 Mo have been performed by different groups. To develop commercially viable (n,γ) 99 Mo/ 99 mTc generator, the generator column should have high adsorption capacity for molybdenum at least several fold higher than the fission 99 Mo generator column. To achieve such high adsorption capacity, gel generator, PZC, and other technologies have been developed. However, there are still many restrictions to apply these technologies for the commercial production. As one of the latter approaches, several candidate adsorbents have been developed. One of the new adsorbents developed at Korea Atomic Energy Research Institute shows a high adsorption capacity for Mo (∼200 mg/g) and reasonable elution efficiency for 99 mTc (60 (∼ 80%). In addition, (n,γ 99 Mo can be loaded by a column operation just like fission Mo generator production

  19. 99mTc-EDTA and 99mTc-DTPA complexes as hydrological tracers

    International Nuclear Information System (INIS)

    Dominguez, J.; Borroto, J.; Nazco, J.; Perez, E.; Gamboa, R.; Cruz, J.

    2002-01-01

    The [ 99m Tc-DTPA] 2- and [ 99m Tc-EDTA] 1- were evaluated as radiotracers for short time hydrological studies. Their complex stability after labelling with 9.25 GBq of 99m Tc, the behaviour against pH variations, from 5 to 9, in simulated solutions and in natural river waters and the sorption of these compounds on the river sediments, were tested in laboratory experiments. Finally field double tracing experiments were carried out for each of labelling complexes and Rhodamine WT. From recovery calculations not losses of the 99m Tc activity were observed. The shape of the RTD curves of the [ 99m Tc-DTPA] 2- and [ 99m Tc-EDTA] 1 were quite similar to the Rhodamine Wt ones. May be concluded that both complexes behaved conservatively on the studied environmental conditions. (author)

  20. Power Systems Development Facility Gasification Test Campaign TC24

    Energy Technology Data Exchange (ETDEWEB)

    Southern Company Services

    2008-03-30

    In support of technology development to utilize coal for efficient, affordable, and environmentally clean power generation, the Power Systems Development Facility (PSDF), located in Wilsonville, Alabama, routinely demonstrates gasification technologies using various types of coals. The PSDF is an engineering scale demonstration of key features of advanced coal-fired power systems, including a KBR Transport Gasifier, a hot gas particulate control device, advanced syngas cleanup systems, and high-pressure solids handling systems. This report summarizes the results of TC24, the first test campaign using a bituminous coal as the feedstock in the modified Transport Gasifier configuration. TC24 was conducted from February 16, 2008, through March 19, 2008. The PSDF gasification process operated for about 230 hours in air-blown gasification mode with about 225 tons of Utah bituminous coal feed. Operational challenges in gasifier operation were related to particle agglomeration, a large percentage of oversize coal particles, low overall gasifier solids collection efficiency, and refractory degradation in the gasifier solids collection unit. The carbon conversion and syngas heating values varied widely, with low values obtained during periods of low gasifier operating temperature. Despite the operating difficulties, several periods of steady state operation were achieved, which provided useful data for future testing. TC24 operation afforded the opportunity for testing of various types of technologies, including dry coal feeding with a developmental feeder, the Pressure Decoupled Advanced Coal (PDAC) feeder; evaluating a new hot gas filter element media configuration; and enhancing syngas cleanup with water-gas shift catalysts. During TC24, the PSDF site was also made available for testing of the National Energy Technology Laboratory's fuel cell module and Media Process Technology's hydrogen selective membrane.

  1. Comparative binding characteristics of Tc-CPI, Tc-TBI, and Tc-MIBI in cultured heart cells: Correlation with biochemical analysis and animal images

    International Nuclear Information System (INIS)

    Piwnica-Worms, D.; Kronauge, J.F.; Holman, B.L.; Davison, A.; Jones, A.G.

    1987-01-01

    Hexakis (isonitrile)technetium (I) complexes are a new class of cationic, lipophilic myocaridal perfusion imaging agents. To better understand their cellular mechanisms of uptake and washout, chick heart cells grown in culture were used as a model myocardial system. Tc-MIBI showed uptake to a plateau at a rate similar to Tc-CPI (t1/2 = 4.1 +- 0.7 minutes); however, the plateau was 63% greater. Tc-TBI uptake approached a plateau 900% greater than Tc-CPI binding. Heart cell studies showed washout of Tc-CPI>Tc-TBI>Tc-MIBI, which correlated with kinetic analysis of rabbit myocardial images. Biochemical in vitro analysis in human plasma demonstrated 75% enzymatic ester hydrolysis of Tc-CPI by 3 minutes, but no hydrolysis of Tc-TBI and Tc-MIBI. The results suggest that metabolism of the ester function of Tc-CPI following myocardial uptake may in part account for the more rapid cellular washout rates of Tc-CPI compared with Tc-TBI and Tc-MIBI

  2. 99mTc bone scanning agents preparation and chemical analysis of Tc(Sn)pyrophosphate, Tc(Sn)MDP and Tc(Sn)HMDP

    International Nuclear Information System (INIS)

    Kroesbergen, J.

    1986-01-01

    This thesis describes a comparison of the preparation, composition and properties of three bone scanning agents: 99m Tc(Sn)pyrophosphate, 99m Tc(Sn)MDP and 99m Tc(Sn)HMDP. This study has been performed for two reasons: First to investigate the preparation and composition of the radiopharmaceuticals as a function of experimental conditions. Together with previously reported results for 99m Tc(Sn)EHDP, obtained in a similar way, this enables to use well-defined preparations of the bone scanning agents. Secondly to gain an insight in the mechanism in which the agents behave 'in vivo'. Because the 'in vivo' process is too complicated to study directly, it seemed more appropriate to perform 'in vitro' investigations as simplifications of the 'in vivo' situation. 304 refs.; 26 figs.; 31 tabs

  3. Transmutation of Tc-99 in fission reactors

    International Nuclear Information System (INIS)

    Kloosterman, J.L.; Li, J.M.

    1994-12-01

    Transmutation of Tc-99 in three different types of fission reactors is considered: A heavy water reactor, a fast reactor and a light water reactor. For the first type a CANDU reactor was chosen, for the second one the Superphenix reactor, and for the third one a PWR. The three most promising Tc-99 transmuters are the fast reactor with a moderated subassembly in the inner core, a fast reactor with a non-moderated subassembly in the inner core, and a heavy water reactor with Tc-99 target pins in the moderator between the fuel bundles. Transmutation half lives of 15 to 25 years can be achieved, with yearly transmuted Tc-99 masses of about 100 kg at a thermal reactor power of about 3000 MW. (orig.)

  4. On the separation of 99mTcO4-, 99mTc-DTPA and 99mTc-citrate as marker species for the determination of Tc chemical forms in plant material using capillary zone electrophoresis

    NARCIS (Netherlands)

    Krijger, G.C.; Claessens, H.A.; Wolterbeek, H.Th.

    1996-01-01

    The present paper addresses the potential use of capillary zone electrophoresis (CZE) as an anal. tool in 99Tc speciation studies. To optimize sampling, storage and anal. procedures, the three marker compds. 99mTcO4-, 99mTc-DTPA and 99mTc-citrate were synthesized and used in test-measurements with

  5. Tc-99m-hexakis(t-butylisonitrile)-technetium(I) (Tc-99m-TBI)

    International Nuclear Information System (INIS)

    Angelberger, P.; Dudczak, R.; Jones, A.G.; Lister-James, J.; Wagner-Loffler, M.; Buchheit, O.; Fally, F.

    1986-01-01

    The potassium analog (Tl-201)/sup +/ is widely used in nuclear cardiology but has inferior scintigraphic (80 keV photons), dosimetric and economic properties as compared to Tc-99m. Therefore considerable efforts have been made to develop a Tc-compound that would accumulate in the myocardium in relation to regional blood flow. This study was aimed at optimizing the preparation of Tc-TBI with n.c.a. Tc-99m, analyze and purify the product with HPLC, verify biodistribution in mice and undertake a clinical evaluation

  6. Radiopharmaceuticals to 99mTc

    International Nuclear Information System (INIS)

    Leon Cabana, Alba

    1994-01-01

    Studies about 99m Tc had demonstrated that have favorable properties for support diagnostic proceedings in nuclear medicine. This physical and chemical properties used for obtain another radiopharmaceuticals have been employed through re actives kits labelled with Tc 99m . A brief description was given about 99m utilities in diagnostic techniques such as endothelium reticular system,renal and hepatic studies,bone scintillators,cardiac diagnostic and cerebral perfusion

  7. Synthesis and Characterization of Tc(I) Carbonyl Nitrosyl Species Relevant to the Hanford Tank Waste: FY 2016 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Hall, Gabriel B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chatterjee, Sayandev [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Levitskaia, Tatiana G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Martin, Thibaut J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wall, Nathalie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Walter, Eric D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-11-24

    Among long-lived radioactive constituents in the Hanford tank waste, Tc presents a unique challenge in that it exists predominantly in the liquid phase, generally in the anionic form of pertechnetate, TcO4-, which is highly volatile at low-activity waste (LAW) vitrification melter temperatures and mobile in the Hanford site’s subsurface environment. The complex behavior of Tc under storage, treatment, and immobilization conditions significantly affects its management options, which to-date remain uncertain. In strongly alkaline environments, Tc exists as pertechnetate, TcO4- (oxidation state +7), and in the reduced forms (oxidation state < +7) collectively known as non-pertechnetate species. Pertechnetate is a well-characterized, anionic Tc species that can be removed from LAW by anion exchange or solvent extraction methods. There is no definitive information on the origin of the non-pertechnetate Tc species, nor is there a comprehensive description of their composition and behavior. It has been recently proposed that the non-pertechnetate species can comprise Tc(I) metal center and carbonyl or mixed carbonyl nitrosyl ligands stabilizing low-valent Tc. Recent work by our group has significantly expanded this previous work, generating a series of Tc(I) carbonyl compounds and demonstrating that they can be generated from reduction of TcO4- in the simulated Hanford tank waste in presence of CO at elevated temperature (Levitskaia et al. 2014). These results are consistent with the previous proposal that [Tc(CO)3]+ species can be present in the Hanford tank waste and suggest that the low Tc(I) oxidation state is stabilized by the π-accepting ability of the CO ligands. The continuation work has been initiated to develop model Tc carbonyl nitrosyl compounds and investigate their potential presence in the Hanford tank wastes. This report summarizes our to-date results.

  8. Radionuclide generators

    International Nuclear Information System (INIS)

    Lambrecht, R.M.

    1983-01-01

    The status of radionuclide generators for chemical research and applications related to the life sciences and biomedical research are reviewed. Emphasis is placed upon convenient, efficient and rapid separation of short-lived daughter radionuclides in a chemical form suitable for use without further chemical manipulation. The focus is on the production of the parent, the radiochemistry associated with processing the parent and daughter, the selection and the characteristic separation methods, and yields. Quality control considerations are briefly noted. The scope of this review includes selected references to applications of radionuclide generators in radiopharmaceutical chemistry, and the life sciences, particularly in diagnostic and therapeutic medicine. The 99 Mo-sup(99m)Tc generator was excluded. 202 references are cited. (orig.)

  9. Technetium-99 m generator safety simulation

    International Nuclear Information System (INIS)

    Kang, Sang Koo; Kim, Chong Yeal

    2008-01-01

    Technetium ( 99m Tc) is one of the most widely used radioactive isotopes for diagnosis in the world. In general, 99m Tc is produced inside the so called technetium generator where 99Mo decays to 99m Tc. And the generator is usually made out of lead to shield relatively high energy radiation from 99m Tc and 99 Mo. In this paper, a GEANT4 simulation is carried out to test the safety of the 99m Tc generators, taking domestic and Japanese products with radioactivity of 18.50 GBq (500 mCi) for example. According to the domestic regulation on radiation safety, the dose at 10 cm and 100 cm away from the surface of radiation shielder should not exceed 2 mSv∙h -1 and 0.02 mSv∙h -1 , respectively. The simulated dose turned out about only 10% of the limit, satisfying the domestic regulation

  10. Electrolytic 99TcO4- reduction at inert electrodes

    International Nuclear Information System (INIS)

    Kremer, C.; Gambino, D.; Leon, A.; Kremer, E.

    1990-01-01

    Electrolytic pertechnetate reduction at inert electrodes was studied as an alternative procedure for synthesizing Tc complexes. Pertechnetate reduction was carried out in aqueous media using different aminated ligands (en, dien, trien and 1,3-dap) forming [TcO 2 (amine) 2 ] + type complexes. Simultaneously with synthesis of the desired Tc complex, TcO 2 was electrodeposited onto the cathode. Conversion of TcO 4 - to Tc complex and TcO 2 was studied as a function of several variables (kind and concentration of supporting electrolyte, ligand concentration, pH, current and electrolysis time). (author) 9 refs.; 6 figs.; 1 tab

  11. Problems in clinical practice of domestic supply of 99Mo/99mTc. Considerations on the domestic production of 99Mo/99mTc

    International Nuclear Information System (INIS)

    Yamabayashi, Hisamichi

    2012-01-01

    At present, a bulky import product, 99 Mo supplied in Japan is produced by a nuclear fission method which enables to produce a generator system with no need of commercially preparing 99m Tc-labeled radiopharmaceuticals due to its high specific activity. However its usage of enriched uranium target leads to avoiding the fission method from the option of domestic production. In order to secure the domestic supply of 99 Mo/ 99m Tc, the neutron activation method, aiming to meet about 20% of domestic demand, is under development along with the re-start program of JMTR. Development of various production methods using accelerators are also in progress. In those non-fission methods with reactors or accelerators, rapid and effective procedures for concentration and refinement of 99m Tc solution eluted from 99 Mo of low specific activity are the subjects to be considered for attaining the stable labeling performances. (author)

  12. Análisis del perfil de compuestos volátiles del mango (mangifera indica l. var. tommy atkins) tratado por métodos combinados

    OpenAIRE

    Moreno, Angélica; León, David F.; Giraldo, Germán A.; Ríos, Eunice

    2010-01-01

    Se evaluó el perfil de compuestos volátiles del mango (Mangifera indica L. Var. Tommy Atkins) al ser tratado con la combinación de los métodos de deshidratación osmótica con o sin pulso de vacío (DOPV y DO) y con secado por aire caliente o con vacío (SAC y VAC). El tiempo utilizado en la cinética del proceso de DO fue de 42 horas y la DOPV de 30 horas; en los procesos de secado, el SAC se realizó durante 24 horas y el VAC requirió 40 horas. En el perfil de compuestos volátiles del mango fresc...

  13. ANÁLISIS DEL PERFIL DE COMPUESTOS VOLÁTILES DEL MANGO (Mangifera indica L. Var. Tommy Atkins) TRATADO POR MÉTODOS COMBINADOS

    OpenAIRE

    Angélica Moreno; David F. León; Germán A. Giraldo; Eunice Ríos

    2010-01-01

    Se evaluó el perfil de compuestos volátiles del mango (Mangifera indica L. Var. Tommy Atkins) al ser tratado con la combinación de los métodos de deshidratación osmótica con o sin pulso de vacío (DOPV y DO) y con secado por aire caliente o con vacío (SAC y VAC). El tiempo utilizado en la cinética del proceso de DO fue de 42 horas y la DOPV de 30 horas; en los procesos de secado, el SAC se realizó durante 24 horas y el VAC requirió 40 horas. En el perfil de compuestos volátiles del mango fresc...

  14. Identificación de los compuestos volátiles de frutos de papaya sin ovipositar y ovipositados por toxotrypana curvicauda (diptera: tephritidae).

    OpenAIRE

    Ruiz Gómez, Olga Lidia

    2016-01-01

    En los tefrítidos la búsqueda, localización y aceptación del hospedero, depende generalmente de estímulos químicos que pueden ser identificados por las hembras a la distancia. La emisión de compuestos volátiles del fruto, puede cambiar con la oviposición y modificar la atracción de las hembras. En el presente estudio se evaluó la atracción de hembras grávidas de Toxotrypana curvicauda hacia frutos de papaya sin ovipositar y ovipositados y se identificaron los compuestos volátiles de los fruto...

  15. Propiedades electrónicas en compuestos intermetálicos de Ce: del cálculo de bandas a las interacciones de muchos cuerpos

    OpenAIRE

    Vildosola, Verónica L.

    2004-01-01

    En este trabajo se estudian las propiedades electrónicas de compuestos de Cerio que se caracterizan por la presencia de electrones 4ƒ. En una primera parte, se llevan a cabo cálculos de primeros principios mediante el método FP-LAPW para analizar el efecto del entorno químico y cristalino en el grado de localización espacial del estado 4ƒ y su relación con el valor del momento magnético de espín del Cerio en un grupo de compuestos de Cerio. Posteriormente, dentro del mismo marco teórico nos a...

  16. Revision: quality control of 99mTc

    International Nuclear Information System (INIS)

    Alves, S.M.; Kabad, M.C.; Teixeira, G.J.; Sousa, C H.S.

    2015-01-01

    The radiopharmaceutical most commonly used in nuclear medicine is technetium-99m. Radiopharmaceuticals labeled with 99m Tc are the main agents for diagnosis, being used in the vast majority of procedures due to radionuclide characteristics. During its preparation impurities can be generated that make products with different qualities of the desired. In this paper were presented some of the factors that can interfere with radiopharmaceuticals and the tests used for quality assurance, certifying that the product is fit for purpose. It is up to nuclear medicine centers deploy a program to raise the quality of exams and increase patient safety. (author)

  17. New bisaminoethanethiol (BAT) ligands which form two interconvertible Tc-99m complexes

    Energy Technology Data Exchange (ETDEWEB)

    Oya, Shunichi; Kung, Mei-Ping; Frederick, Dana; Kung, Hank F

    1995-08-01

    Most commonly used radiopharmaceuticals in diagnostic nuclear medicine are labeled with Tc-99m. This is due to its superior physical characteristics (T{sub (1(2))} = 6 h and gamma energy 140 KeV) and convenient availability from the {sup 99}Mo/{sup 99mm}Tc generator. In an attempt to fine tune the properties of Tc-99m complexes, the synthesis and radiolabeling of two novel N{sub 2}S{sub 2} ligands, N,-2-mercaptobenzyl-N'-(1-oxo-2-mercapto-2-methyl)propyl ethylenediamine,8, and N,-2-methylthiobenzyl-N'-(1-oxo-2-mercapto-2-methyl)propyl ethylenediamine, 11, with an ionizable SH or unionizable SMe group, respectively, for the formation of complexes with Tc{sup v}O center cores, have been examined. Both ligands initially formed one apparently stable, lipophilic and neutral complex (HPLC, Rt = 7 min, reverse-phase column, acetonitrile: buffer, pH 7.0; (55(45)); V/V; partition coefficient between 1-octanol and buffer of 410 and 335, respectively) with [{sup 99m}Tc]pertechnetate in the presence of stannous chloride. After treatment with a reducing agent, NaCNBH{sub 3}, the initial [{sup 99m}Tc]8 and 11 complexes were reduced; the reduced complexes were less lipophilic (shorter retention time, Rt = 5 min, on the same reversed phase HPLC). However, only the oxidized form showed sufficient stability. The reduced forms of both [{sup 99m}Tc]8 and 11 were readily and completely converted back to the oxidized forms by a stream of air. Biodistribution studies in rats demonstrated that the [{sup 99m}Tc]8 (oxidized form) penetrated the blood-brain barrier (0.67% dose/organ at 2 min postinjection), but washed out from the brain quickly (0.29% dose/organ at 30 min postinjection). On the contrary, [{sup 99m}Tc]11 (oxidized form) did not show any brain uptake (0.03% dose/organ at 2 min postinjection), despite its higher lipophilicity. The disparity between these two Tc-99m complexes may be related to the relative instability of [{sup 99m}Tc]11 (oxidized form) by the introduction of the

  18. New bisaminoethanethiol (BAT) ligands which form two interconvertible Tc-99m complexes

    International Nuclear Information System (INIS)

    Oya, Shunichi; Kung, Mei-Ping; Frederick, Dana; Kung, Hank F.

    1995-01-01

    Most commonly used radiopharmaceuticals in diagnostic nuclear medicine are labeled with Tc-99m. This is due to its superior physical characteristics (T (1(2)) = 6 h and gamma energy 140 KeV) and convenient availability from the 99 Mo/ 99mm Tc generator. In an attempt to fine tune the properties of Tc-99m complexes, the synthesis and radiolabeling of two novel N 2 S 2 ligands, N,-2-mercaptobenzyl-N'-(1-oxo-2-mercapto-2-methyl)propyl ethylenediamine,8, and N,-2-methylthiobenzyl-N'-(1-oxo-2-mercapto-2-methyl)propyl ethylenediamine, 11, with an ionizable SH or unionizable SMe group, respectively, for the formation of complexes with Tc v O center cores, have been examined. Both ligands initially formed one apparently stable, lipophilic and neutral complex (HPLC, Rt = 7 min, reverse-phase column, acetonitrile: buffer, pH 7.0; (55(45)); V/V; partition coefficient between 1-octanol and buffer of 410 and 335, respectively) with [ 99m Tc]pertechnetate in the presence of stannous chloride. After treatment with a reducing agent, NaCNBH 3 , the initial [ 99m Tc]8 and 11 complexes were reduced; the reduced complexes were less lipophilic (shorter retention time, Rt = 5 min, on the same reversed phase HPLC). However, only the oxidized form showed sufficient stability. The reduced forms of both [ 99m Tc]8 and 11 were readily and completely converted back to the oxidized forms by a stream of air. Biodistribution studies in rats demonstrated that the [ 99m Tc]8 (oxidized form) penetrated the blood-brain barrier (0.67% dose/organ at 2 min postinjection), but washed out from the brain quickly (0.29% dose/organ at 30 min postinjection). On the contrary, [ 99m Tc]11 (oxidized form) did not show any brain uptake (0.03% dose/organ at 2 min postinjection), despite its higher lipophilicity. The disparity between these two Tc-99m complexes may be related to the relative instability of [ 99m Tc]11 (oxidized form) by the introduction of the unionizable methylated thiol group as one of the donor

  19. Separation of sup(99m)Tc from 99Mo through a hydrous zirconium oxide column

    International Nuclear Information System (INIS)

    Mengatti, J.

    1980-01-01

    The preparation of 99 Mo-,sup(99m)Tc generator based on the adsorption of 99 Mo on hydrous zirconium oxide column, employing the in exchange technique, is described. The adsorption of 99 Mo on hydrous zirconium oxide (HZO) and the separation of sup(99m)Tc, generated by the decay of 99 Mo with saline solution, are analised. The sup(99m)Tc separation yield, pH of the eluted solution, aspect of the elution curve and the adsorption of 99 Mo on hydrous zirconium oxide calcined at 800 0 C are studied. The chemical and radioactive purities of the final product are analysed and the variation of the elution yield for successive elutions is studied. (Author) [pt

  20. Reactividad entre whiskers de α-SiC y aluminio durante el procesado por vía líquida de materiales compuestos de matriz metálica

    Directory of Open Access Journals (Sweden)

    Ureña, A.

    1999-06-01

    Full Text Available The reactivity between α-SiC whiskers and an aluminium alloy (Al-Cu-Mg, both present in a metal matrix composite, has been studied when such matrix is in molten state. Using mainly transmission electron microscopy (TEM and electron microdiffraction (ED, the nature and morphology of the reaction products generated at the α-SiC/aluminium interface, when this last melts under different condition which simulate casting and welding procedures for metal matrix composites, have been characterised. Both the formation of Al4C3 aggregates with platelet morphology generated by dissolution-reaction mechanisms, and aciculate crystals of the same carbide form by complete dissolution of the α-SiC whiskers and later Al4C3 precipitation into the molten aluminium. Ternary Al-Si carbides with high chemical stability have been also identified by TEMED (β-Al4SiC4, being its formation related with higher energetic conditions than for the Al4C3.

    Se realiza un estudio de la reactividad entre whiskers de α-SiC y una aleación de aluminio en estado líquido (Al-Cu-Mg, que forman parte de un material compuesto de matriz metálica. Empleando fundamentalmente técnicas de microscopía electrónica de barrido (MEB y de transmisión (MET, junto con difracción de electrones (DE, se ha caracterizado la naturaleza y morfología de los productos de reacción que se generan en la intercara α-SiC/aluminio, cuando éste funde en diferentes condiciones que simulan procesos de fabricación y soldadura del material compuesto. Se ha observado tanto la formación de agregados de Al4C3 con morfología tabular producidos por mecanismos de disolución-reacción de los whiskers, como de cristales aciculares del mismo tipo de carburo formados por disolución total de α-SiC y precipitación en el aluminio fundido. Se ha determinado también que, en condiciones suficientemente energéticas, pueden llegar a formarse carburos ternarios de aluminio y silicio (β-Al4SiC4 que

  1. Comparación de la microestructura y propiedades de impacto de dos materiales compuestos laminados de acero de ultraalto contenido de carbono

    Directory of Open Access Journals (Sweden)

    Pozuelo, M.

    2004-04-01

    Full Text Available Two ferrous laminated composites containing six layers have been processed by roll bonding. One of them consists of three layers of an ultrahigh carbon steel (1.3%C UHCS interlayered with other three layers of a microalloyed steel. The other composite consists of three layers of UHCS and three layers of a mild steel. Microstructure, Vickers hardness and impact properties have been studied. The absorbed energy values of the two laminated composites were higher than that of the UHCS.

    Se procesaron mediante laminación en caliente dos materiales compuestos laminados de acero de ultraalto contenido de carbono (AUAC, 1,3%C de seis capas cada uno: El primero está compuesto por tres capas de AUAC alternadas con tres capas de un acero microaleado, y el segundo con tres del mismo AUAC alternadas con tres de un acero suave. Se ha realizado un estudio de sus microestructuras, dureza Vickers y propiedades de impacto. Se han mejorado los valores de energía absorbida de los dos materiales compuestos laminados respecto al del AUAC.

  2. Estudio teórico de moléculas de interés en Astrofísica: compuestos binarios policarbonados

    Science.gov (United States)

    Largo-Cabrerizo, A.

    Se han detectado en el espacio distintos compuestos binarios policarbonados (que se pueden formular como CnX), algunos de ellos con elementos de la primera fila del sistema periódico, pero también existen otros que contienen elementos de la segunda fila, como azufre o silicio. La información experimental sobre estos últimos compuestos es escasa, por lo que los estudios teóricos son especialmente valiosos en este campo. En esta comunicación presentaremos los avances mas recientes que sobre el tema ha realizado nuestro grupo. Incidiremos particularmente en dos aspectos. En primer lugar resumiremos los estudios en los que hemos intentado proporcionar información estructural sobre carburos metálicos formados por sodio, magnesio, aluminio o calcio, que pueda ser de ayuda a la hora de caracterizar estas moléculas en laboratorio como paso previo a su eventual detección en el espacio. Un aspecto importante dentro de este primer apartado es el análisis de las propiedades moleculares en función del tamaño del sistema (cuantificado en el numero de átomos de carbono) con el objeto de intentar sistematizar su estudio. En segundo lugar comentaremos brevemente algunos de los estudios realizados sobre posibles reacciones que pueden ser vías de síntesis de este tipo de compuestos en el medio interestelar.

  3. Clinical application of 99mTc-DTPA-HSA

    International Nuclear Information System (INIS)

    Kawamura, Yasuaki; Yamazaki, Junichi; Okuzumi, Ichio

    1989-01-01

    A newly developed blood pool imaging agent, Tc-99m DTPA-HSA (Tc-99m HSA-D), was clinically assessed in blood pool studies of patients with heart disease. Twenty mCi of Tc-99m HSA-D was iv injected to the patients. Similarly, conventional Tc-99m HSA was injected one week later for comparison. Blood counts of Tc-99m HSA-D were significantly higher than those of Tc-99m HSA at 30 minutes after iv injection (p<0.01) and at one, 3, and 6 hours (p<0.001). For the heart, liver, and lungs, sequential counts of Tc-99m HSA-D were also significantly higher than those of Tc-99m HSA. Free Tc-99m uptake in the stomach, thyroid gland, and kidneys was higher on Tc-99m HSA images than Tc-99m HSA-D images. Hepatic and pulmonary uptake of free Tc-99m that were visualized on Tc-99m HSA-D did not influence the diagnostic ability. None of the patients had clinical toxicity of Tc-99m HSA-D. The results indicate that Tc-99m HSA-D is a stable blood pool imaging agent. (Namekawa, K)

  4. Homogeneous SLOWPOKE reactors for Mo-99/Tc-99m production in North America

    Energy Technology Data Exchange (ETDEWEB)

    Hilborn, J.W., E-mail: hilbovanw@sympatico.ca [Deep River, Ontario (Canada); Bonin, H.W. [Royal Military College of Canada, Kingston, Ontario (Canada)

    2014-07-01

    The 15 month shutdown of NRU in 2009 - 2010 caused an overall isotope shortage of approximately 30%; and in North America, the annual Tc-99m demand decreased from an estimated 20 million unit doses to about 15 million unit doses. Mo-99/Tc-99m is produced from HEU targets, irradiated in NRU for 11 days, and after chemical removal of uranium it is shipped to Nordion in Kanata, Ontario. Nordion further purifies the material and sends it to Lantheus Medical Imaging in the USA for manufacture of Mo-99 generators, which are then distributed to hundreds of hospital radiopharmacies throughout North America. One other American company, Covidien, manufactures and distributes Mo-99 generators like Lantheus, but they import bulk Mo-99 from Europe or South Africa. At the hospitals, Tc-99m is chemically extracted daily from the Mo-99 generators and loaded into syringes for immediate clinical use. Fortuitously, the 66 hour half-life of Mo-99 allows the replenishment of Tc-99m in the generator over a growth period of about 20 hours; and a generator can be 'milked' daily for up to two weeks. A more efficient model is the direct production and distribution of Tc-99m unit doses to regional hospitals from 10 'industrial' radiopharmacies located at existing licensed reactor sites in North America. A 20 kW homogeneous SLOWPOKE reactor at each site would deliver 15 litres of irradiated uranyl sulphate fuel solution daily to industrial-scale hot cells for extraction of Mo-99, which would be incorporated in large Mo-99/Tc-99m generators for extraction of Tc-99m five days a week; and the Low Enriched Uranium (LEU) would be recycled. Each automated hot-cell facility would be designed to load up to 7,000 Tc-99m syringes daily, for courier delivery to all of the Nuclear Medicine hospitals within a 3 hour average range by road transport. Typically, the delivered doses would be in the range 10 to 30 mCi. Assuming an average unit dose of 25 mCi at the hospital and 5 x 52

  5. Response of mouse foetus to radiation from Na sup(99m)TcO4

    International Nuclear Information System (INIS)

    Lathrop, K.A.; Gloria, I.V.; Harper, P.V.

    1976-01-01

    Technetium has assumed ecological importance as a source of law-level radiation, with the use of sup(99m)Tc in nuclear medicine and production of sup(99m)Tc in power generation reactions. Technetium introduced as pertechnetate into the bloodstream of pregnant females is transported across the placental barrier to the foetus, where a portion appears to be incorporated into biomolecules. When combined as biomolecules, radionuclides that decay by electron capture or isomeric transition show a lethality greater than that predicted in cell cultures and radiation therapy. The decay of sup(99m)Tc by isomeric transition, together with the above considerations, places a high priority on the investigation of its radiation effects due to clinical doses of up to 25 mCi. Female mice were given daily intravenous injections of 0, 5, 50 and 500 μCi of sup(99m)Tc as pertechnetate in isotonic saline throughout gestation, gestation and lactation, or lactation. At two months of age, the progeny were mated with randomly selected litter mates to produce a second generation; the process was repeated for production of the third generation. Only the first generation was irradiated. An injection of 5 μCi/mouse and 10 mCi/human both approximately equal 0.2 μCi/g of body weight; however, the mouse foetus receives an estimated radiation dose of 0.05 rad, and the human 1 rad. Throughout the gestation period, a mouse at the 5 μCi level receives about 100 μCi of sup(99m)Tc, resulting in approximately 1 rad to the foetus. Significant reduction of body weight was noted in all experimental groups. The greatest effects were seen in the progeny of mothers treated during gestation only. These preliminary results reinforce the existing concern about use of sup(99m)Tc-pertechnetate in pregnant or potentially pregnant subjects

  6. Analysis of eddy current loss in high-Tc superconducting power cables with respect to various structure of stabilizer

    International Nuclear Information System (INIS)

    Choi, S. J.; Song, M. K.; Lee, S. J.; Cho, J. W.; Sim, K. D.

    2005-01-01

    The High-Tc superconducting power cable consists of a multi-layer high-Tc superconducting cable core and a stabilizer which is used to bypass the current at fault time. Eddy current loss is generated in the stabilizer in normal operating condition and affects the whole system. In this paper, the eddy current losses are analyzed with respect to various structure of stabilizer by using opera-3d. Moreover, optimal conditions of the stabilizer are derived to minimize the eddy current losses from the analyzed results. The obtained results could be applied to the design and manufacture of the high-Tc superconducting power cable system.

  7. A monoallelic deletion of the TcCRT gene increases the attenuation of a cultured Trypanosoma cruzi strain, protecting against an in vivo virulent challenge.

    Directory of Open Access Journals (Sweden)

    Fernando J Sánchez-Valdéz

    2014-02-01

    Full Text Available Trypanosoma cruzi calreticulin (TcCRT is a virulence factor that binds complement C1, thus inhibiting the activation of the classical complement pathway and generating pro-phagocytic signals that increase parasite infectivity. In a previous work, we characterized a clonal cell line lacking one TcCRT allele (TcCRT+/- and another overexpressing it (TcCRT+, both derived from the attenuated TCC T. cruzi strain. The TcCRT+/- mutant was highly susceptible to killing by the complement machinery and presented a remarkable reduced propagation and differentiation rate both in vitro and in vivo. In this report, we have extended these studies to assess, in a mouse model of disease, the virulence, immunogenicity and safety of the mutant as an experimental vaccine. Balb/c mice were inoculated with TcCRT+/- parasites and followed-up during a 6-month period. Mutant parasites were not detected by sensitive techniques, even after mice immune suppression. Total anti-T. cruzi IgG levels were undetectable in TcCRT+/- inoculated mice and the genetic alteration was stable after long-term infection and it did not revert back to wild type form. Most importantly, immunization with TcCRT+/- parasites induces a highly protective response after challenge with a virulent T. cruzi strain, as evidenced by lower parasite density, mortality, spleen index and tissue inflammatory response. TcCRT+/- clones are restricted in two important properties conferred by TcCRT and indirectly by C1q: their ability to evade the host immune response and their virulence. Therefore, deletion of one copy of the TcCRT gene in the attenuated TCC strain generated a safe and irreversibly gene-deleted live attenuated parasite with high immunoprotective properties. Our results also contribute to endorse the important role of TcCRT as a T. cruzi virulence factor.

  8. Determinación de compuestos polares por TLC-FID en aceites refinado y semi-hidrogenado de soja sometidos a calentamiento prolongado

    Directory of Open Access Journals (Sweden)

    Cruzian, J. L.

    1997-06-01

    Full Text Available The thermal degradation of oils and fats leads to the formation of polar compounds, which is the reason why their determination is adopted for the quality control of the oil and fat used in frying. Samples of refined and partially hydrogenated soybean oil were heated for 30 and 60 hours respectively and the polar compounds content were determined using the lUPAC-AOAC official method and TLC-FID. The samples of oil and the fractions separated on the column were applied to the chromarods and developed in petroleum ether: diethyl ether (93:7 v/v. The determination of polar compounds by lUPAC method and by TLC-FID presented similar results (P-value<< 0,001, although when the content was greater than 16% the second method gave higher values. The results showed that the state of degradation of oils and fats as measured for the quantity of polar compounds can be determined alternatively by TLC-FID, presenting a significant reduction in time, hand work and solvent volume.

    La degradación térmica de aceites y grasas lleva a la formación de compuestos polares, motivo por el cual su determinación es usada como control de calidad de aceites y grasas utilizadas en fritura. Muestras de aceite de soja refinado y semi-hidrogenado fueron calentadas durante 30 y 60 horas respectivamente y el contenido de compuestos polares fue determinado utilizando el método oficial lUPAC-AOAC y TLCFID. Las muestras de aceite y las fracciones separadas en la columna fueron aplicadas en los «chromarods» y desarrolladas en éter de petróleo: éter etílico (93:7 v/v. La determinación de compuestos polares por el método lUPAC y por TLC-FID, dieron resultados similares (P-value<< 0,001, aunque los obtenidos por el segundo método fueron superiores, cuando los compuestos polares superan el 16%. Los resultados obtenidos indican que el estado de descomposición de aceites y grasas medido por la cantidad de compuestos polares puede ser determinado alternativamente por

  9. Reagent' sets for the concentration of sup(99m)Tc and sup(113m)In

    International Nuclear Information System (INIS)

    Bianco de Salas, G.N.; Arciprete, J.; Mitta, A.E.A.

    1976-10-01

    A simple technique for the concentration of the eluates from 99 Mo/sup(99m)Tc and 113 Sn/sup(113m)In generators is described. The reagents' sets provided by the C.N.E.A. for the labelling of different radiopharmaceuticals can be used by only reducing their volumes proportionally. Both concentration techniques for Tc-99m and In-113m will be supplied to users as reagents' sets. (author) [es

  10. A new detection method of 99Tc by nuclear excitation

    International Nuclear Information System (INIS)

    Sekine, T.; Yoshihara, Kenji; Nemeth, Zs.; Lakosi, L.; Veres, A.

    1989-01-01

    A new nuclear excitation process, 99 Tc(γ,γ') 99m Tc reaction, was applied for the first time to radioactivation analysis of technetium. Bremsstrahlung irradiation of 99 Tc samples gave the reaction product 99m Tc which emits γ-ray easily measurable by a semiconductor detector. The production rate of 99m Tc per μg 99 Tc was linearly correlated with the flux of bremsstrahlung. The detection limit of 99 Tc was estimated to be nanogram order (0.63 Bq 99 Tc) under the optimum irradiation condition. Possible interference by 100 Ru(γ, p) 99m Tc reaction was also studied, which could be discriminated from the (γ,γ') reaction by simultaneously occurring 98 Ru(γ,p) 97 Ru reaction. (author) 17 refs.; 7 figs

  11. Modelado de Materiales Compuestos por Elementos Finitos usando Restricciones Cinemáticas Finite Element Modeling of Composite Materials using Kinematic Constraints

    Directory of Open Access Journals (Sweden)

    Oscar E. Ruiz

    2009-12-01

    Full Text Available El propósito de este artículo es presentar simulaciones del comportamiento de materiales compuestos basado en restricciones cinemáticas entre las mismas fibras y entre las fibras y la resina circundante. En la revisión de literatura, los autores han encontrado que las restricciones cinemáticas no han sido plenamente explotadas para modelar materiales compuestos, probablemente debido a su alto costo computacional. El propósito de este articulo es exponer la implementación y resultados de tal modelo, usando Análisis por Elementos Finitos de restricciones geométricas prescritas a los nodos de la resina y las fibras. Las descripciones analíticas del comportamiento de materiales compuestos raramente aparecen. Muchas aproximaciones para describir materiales compuestos en capas son basadas en la teoría de funciones C1Z y C0 Z, tal como la Teoría Clásica de Capas (CLT. Estas teorías de funciones contienen significativas simplificaciones del material, especialmente para compuestos tejidos. Una aproximación hibrida para modelar materiales compuestos con Elementos Finitos (FEA fue desarrollada por Sidhu y Averill y adaptada por Li y Sherwood para materiales compuestos tejidos con polipropileno de vidrio.The purpose of this article is to present simulations of the behavior of composite materials based on kinematic restrictions among the fibers themselves and among fibers and the surrounding resine. In the literature review the authors have found that the kinematic restrictions have not been fully exploited for modeling composite materials, probably due to their high computational expense. The purpose of this article is to show the implementation and results of such a model, by using a Finite Element Analysis of geometric restrictions prescribed to the resine and fiber nodes. Closed analytic descriptions on behavior of layered composite materials are very rare. Many approaches to describe layered composite material are based on the theory of

  12. A comparison of rat SPECT images obtained using 99mTc derived from 99Mo produced by an electron accelerator with that from a reactor

    International Nuclear Information System (INIS)

    Galea, R; Ross, C K; Moore, K; Wells, R G; Lockwood, J; Harvey, J T; Isensee, G H

    2013-01-01

    Recent shortages of molybdenum-99 ( 99 Mo) have led to an examination of alternate production methods that could contribute to a more robust supply. An electron accelerator and the photoneutron reaction were used to produce 99 Mo from which technetium-99m ( 99m Tc) is extracted. SPECT images of rat anatomy obtained using the accelerator-produced 99m Tc with those obtained using 99m Tc from a commercial generator were compared. Disks of 100 Mo were irradiated with x-rays produced by a 35 MeV electron beam to generate about 1110 MBq (30 mCi) of 99 Mo per disk. After target dissolution, a NorthStar ARSII unit was used to separate the 99m Tc, which was subsequently used to tag pharmaceuticals suitable for cardiac and bone imaging. SPECT images were acquired for three rats and compared to images for the same three rats obtained using 99m Tc from a standard reactor 99 Mo generator. The efficiency of 99 Mo– 99m Tc separation was typically greater than 90%. This study demonstrated the delivery of 99m Tc from the end of beam to the end user of approximately 30 h. Images obtained using the heart and bone scanning agents using reactor and linac-produced 99m Tc were comparable. High-power electron accelerators are an attractive option for producing 99 Mo on a national scale. (paper)

  13. Can tumor uptake Tc-99m MDP

    International Nuclear Information System (INIS)

    Yang, Y.S.F.; Zeng, Z.J.; Yao, Y.M.; Shi, S.M.P.; Shi, S.Z.Y.

    2002-01-01

    Aim: To study a distribution of Tc-99m MDP in mice bearing tumor cell lines. Methods: The uptake of Tc-99m MDP was analyzed in seven human tumor cell lines (SPC-A1 adenocarcinoma of lung cancer, P37 Breast cancer, T24 Bladder cancer, SKOV2 Ovary carcinoma, Hela-229 Cervical carcinoma, Osteosarcoma, A375 Melanoma) and one mouse lung cancer cell line (Lewis). They were transplanted into 13, 4, 5, 5, 4, 5 athymic mice, 6 SCID nude mice and 4 C57 black mice, respectively. Approximately 10(7) cells of each cell line were injected subcutaneously into a right chest of mouse. After 5∼6 weeks, the Tc-99m MDP scintigraphy were determined 5-6 hours after i.v. injection of 74MBq in 0.05ml every mouse. Result: Biodistribution and tumor uptake MDP was different in the various cell types investigated. Region of interests (RIOs) placed on a small part of the tumor and horizontal copied to left chest or spine of mice in Tc-99m MDP imaging and the average count ratio (tumor to background ratio: T/B, tumor to spine ratio: T/NT) in each ROI was calculated. 13 nude mice bearing the adenocarcinoma (SPC-A1) were sacrificed and biodistribution was determined after Tc-99m MDP scintigraphy. Results were expressed as % injected dose/gram (%ID/g), mean±SD. T-ulcer=ulcer of tumor, T-round=surrounding of tumor, T-center=the center of tumor, Thor-sp=thoracic spine, Lum-ver=lumbar vertebra, LN=lymph node. Conclusions: Tumor can uptake Tc-99m MDP including adenocarcinoma. Higher uptake rate in the center tissue of tumor is than other part of tumor. It maybe connected with necrosis or fibrosis of tumor

  14. Propiedades mecánicas de materiales compuestos de matriz de aluminio reforzados con intermetálicos

    Directory of Open Access Journals (Sweden)

    Torres, B.

    2001-04-01

    Full Text Available In this work 2124 aluminium matrix composites reinforced with Ni3Al, NiAl, MoSiO2 and Cr3Si intermetallic powder particles have been investigated. For comparision purposes, unreinforced 2124 and reinforced with SiC have also been studied. In all cases, the same powder metallurgy route was used, i.e. the 2124 alloy was obtained by rapid solidification and the intermetallic particles by self-propagating high-temperature synthesis (SHS. The matrix and the intermetallics were mechanically blended, cold compacted and finally hot extruded. Tensile tests were carried out in T1 and T4 treatments. Results indicate that mechanical properties depend strongly on the tendence to form new phases at the matrixintermetallic interface during procesing and/or futher thermal treatments. The materials which present better properties are those that present less reaction between matrix and intermetallic reinforcement, i.e. MoSiO2 and SiC reinforced composites.

    En este trabajo se estudia el comportamiento mecánico de varios materiales compuestos de matriz de aluminio 2124 reforzados con partículas de los intermetálicos, Ni3Al, NiAl, MoSiO2 y Cr3Si. Los resultados obtenidos se comparan con la aleación 2124 monolítica y con esa misma aleación reforzada con partículas del cerámico SiC. En todos los casos, se sigue la misma ruta de procesado pulvimetalúrgico a partir de polvos rápidamente solidificados, en el caso de la aleación 2124, y de la molienda mecánica de un tocho obtenido por síntesis autopropagada a temperatura elevada (SHS, para el refuerzo intermetálico. Matriz y reforzante se mezclan, mecánicamente, para, a continuación, compactar uniaxialmente en frío, procediéndose, finalmente, a la consolidación por extrusión. Las propiedades mecánicas se estudian mediante ensayos de tracción en estado T1 y T4. Los resultados obtenidos indican que las propiedades mec

  15. Radionuclide generators

    International Nuclear Information System (INIS)

    Lambrecht, R.M.; Wollongong Univ.; Tomiyoshi, K.; Sekine, T.

    1997-01-01

    The present status and future directions of research and development on radionuclide generator technology are reported. The recent interest to develop double-neutron capture reactions for production of in vivo generators; neutron rich nuclides for radio-immunotherapeutic pharmaceuticals: and advances with ultra-short lived generators is highlighted. Emphasis is focused on: production of the parent radionuclide; the selection and the evaluation of support materials and eluents with respect to the resultant radiochemical yield of the daughter, and the breakthrough of the radionuclide parent: and, the uses of radionuclide generators in radiopharmaceutical chemistry, biomedical and industrial applications. The 62 Zn → 62 Cu, 66 Ni → 66 Cu, 103m Rh → 103 Rh, 188 W → 188 Re and the 225 Ac → 221 Fr → 213 Bi generators are predicted to be emphasized for future development. Coverage of the 99 Mo → 99m Tc generator was excluded, as it the subject of another review. The literature search ended June, 1996. (orig.)

  16. Origin of the pressure-dependent Tc valley in superconducting simple cubic phosphorus

    Science.gov (United States)

    Wu, Xianxin; Jeschke, Harald O.; Di Sante, Domenico; von Rohr, Fabian O.; Cava, Robert J.; Thomale, Ronny

    2018-03-01

    Motivated by recent experiments, we investigate the pressure-dependent electronic structure and electron-phonon (e-ph) coupling for simple cubic phosphorus by performing first-principles calculations within the full potential linearized augmented plane-wave method. As a function of increasing pressure, our calculations show a valley feature in Tc, followed by an eventual decrease for higher pressures. We demonstrate that this Tc valley at low pressures is due to two nearby Lifshitz transitions, as we analyze the band-resolved contributions to the e-ph coupling. Below the first Lifshitz transition, the phonon hardening and shrinking of the γ Fermi surface with s -orbital character results in a decreased Tc with increasing pressure. After the second Lifshitz transition, the appearance of δ Fermi surfaces with 3 d -orbital character generate strong e-ph interband couplings in α δ and β δ channels, and hence lead to an increase of Tc. For higher pressures, the phonon hardening finally dominates, and Tc decreases again. Our study reveals that the intriguing Tc valley discovered in experiment can be attributed to Lifshitz transitions, while the plateau of Tc detected at intermediate pressures appears to be beyond the scope of our analysis. This strongly suggests that aside from e-ph coupling, electronic correlations along with plasmonic contributions may be relevant for simple cubic phosphorus. Our findings hint at the notion that increasing pressure can shift the low-energy orbital weight towards d character, and as such even trigger an enhanced importance of orbital-selective electronic correlations despite an increase of the overall bandwidth.

  17. Development of 99mTc-labelled the d,1-diasteroisomer of HM-PAO for cerebral blood flow imaging

    International Nuclear Information System (INIS)

    Lun Xiao.

    1989-10-01

    The d,1-diastereoisomer of hexamethyl propyleneamine oxime (HM-PAO) was selected as the preferred ligand for Tc-99m as a radiotracer for cerebral perfusion imaging. Further improvement of the synthesis and isolation method of HM-PAO resulted in pure d,1-HM-PAO and pure meso-HM-PAO. The neutral, lipophilic Tc-99m complexes of d,1-HM-PAO and meso-HM-PAO were formed in high yield by stannous reduction of Mo-99/Tc-99m generator eluate, respectively. Two minutes following i.v. administration of Tc-99m-d,1-HM-PAO in mice, 2.24% of the injected dose appears in the brain. Little washout of the tracer is observed up to 24-hour post injection. Two minutes following i.v. administration of Tc-99m-meso-HM-PAO in mice, 1.9% of the injected dose appears in the brain. The radioactivity of Tc-99m-meso-HM-PAO declined faster than that of Tc-99m-d,1-HM-PAO did in the brain up to 24-hour post injection. 12 refs, 5 figs, 5 tabs

  18. Empleo de paneles compuestos por subproductos de centrales térmicas en fachadas trasdosadas

    Directory of Open Access Journals (Sweden)

    Alba, M. D.

    2012-06-01

    Full Text Available Two new recycled gypsum boards are proposed which have a better environmental performance due to the fact that they are made of traditional materials and new recycled ones derived from biomass (waste generated during the extraction of olive pomace and the coal combustion produced in power plants. Before using these wastes as raw materials, they have been submitted to chemical analysis and the panels made of them have been tested to prove their mechanical, thermal and fire performance. Subsequently, the new recycled panels have been implemented in a traditional facade solution to verify their functional and thermal feasibility. Finally, the results obtained show that the panels made of biomass ashes have a better mechanical and thermal performance than those made of coal ashes and that they can provide a sustainable alternative to the traditional facade materials due to its lower environmental impact based on the reduction of raw materials consumption and industrial waste. The new materials comply with the specifications of Spanish Technical Building Code in the region evaluated

    Se presentan dos nuevas tipologías de paneles para trasdosado de fachadas, que proporcionan como mejora ambiental la combinación de materiales tradicionales con nuevos materiales reciclados obtenidos de residuos procedentes de la combustión de orujillo y de carbón en centrales térmicas. Con anterioridad a su uso, dichos residuos han sido sometidos a exhaustivos ensayos químicos y los paneles fabricados a partir de los mismos, a ensayos mecánicos, térmicos y de resistencia al fuego que justifican su empleo. Posteriormente, los nuevos paneles hechos a base de materiales reciclados se han implementado como trasdosado de una solución de fachada convencional para verificar su viabilidad funcional y el buen comportamiento aislante del conjunto. Finalmente, de los resultados obtenidos se extrae que los paneles fabricados con cenizas de orujillo tienen un mejor

  19. Simple determination of 99Tc in radioactive waste using Tc extraction disk and imaging plates

    International Nuclear Information System (INIS)

    Kameo, Y.; Katayama, A.; Hoshi, A.; Haraga, T.; Nakashima, M.

    2010-01-01

    A simple method was developed for determination of 99 Tc in low-level radioactive waste: Technetium-99 retained by a solid phase extraction disk was directly measured with imaging plates system. It was found that more than 97% of Tc were retained by the disk from a solution of pH 2 to 12, whereas depth profile of Tc in the disk, which greatly influences the counting efficiency, depended on solution pH. The present method was successfully applied to actual radioactive liquid waste samples arising from nuclear research facilities.

  20. Development of more efficacious /sup 99m/Tc organ imaging agents for use in nuclear medicine by analytical characterization of radiopharmaceutical mixtures. Progress report, May 1, 1983-January 1, 1986

    International Nuclear Information System (INIS)

    Heineman, W.R.

    1986-01-01

    The formation of many different technetium complexes in the Tc(NaBH 4 )-HEDP, Tc(NaBH 4 )-MDP, and Tc(NaBH 4 )-DMAD systems has been clearly demonstrated by HPLC-separation of reaction mixtures. The dramatically different biodistributions exhibited by the various complexes strongly suggests that an improved skeletal radiopharmaceutical would result if the single technetium complex which exhibits the optimum biodistribution properties is administered to the patient. The influence of pH, time, concentrations of TcO 4 - and ligand, and the nature of reductant on the relative amounts of the different complexes formed were investigated. Electrochemical reduction offers a means of possibly generating a desired complex in very high yield due to the precision with which redox potential can be controlled. Additionally, we have developed HPLC methods with uv and electrochemical detection for the determination of total TcO 4 - in eluents from the 99 Mo//sup 99m/Tc radionuclide generator. The inadequacy of current theory to accurately predict total TcO 4 - in generator eluents was demonstrated in that the concentration of total TcO 4 - is a major factor determining the yield of individual Tc-diphosphonate complexes. Spectroelectrochemistry proved an effective technique to study the redox properties of Tc-complexes. 18 refs., 10 figs., 1 tab

  1. The TC-PSI indicator for forecasting the potential for market power in wholesale electricity markets

    International Nuclear Information System (INIS)

    Hesamzadeh, Mohammad R.; Biggar, Darryl R.; Hosseinzadeh, Nasser

    2011-01-01

    Wholesale electricity market regulators have long sought a simple, reliable, transparent indicator of the likely impact of wholesale market developments on the exercise of market power. Conventional indicators, such as the Pivotal Supplier Indicator (PSI) and the Residual Supply Index (RSI) cannot be extended to apply to meshed transmission networks, especially when generating companies hold a portfolio of generating units at different locations on the network. This paper proposes a generalisation of these standard measures termed the 'Transmission-Constrained Pivotal Supplier Indicator (TC-PSI)'. The TC-PSI of a generating company is defined as the maximum must-run generation for any subset of generating plant while allowing for strategic operation of other plant in the portfolio. We illustrate the use of the TC-PSI using a five-node model of the Australian NEM. - Highlights: → An indicator for assessing the pivotality of generating portfolios is proposed. → Transmission constraints are modelled explicitly in the proposed indicator. → Strategic behaviours of a generating portfolio in using its units are modelled. → This approach was illustrated using a 5-node model of the Australian NEM.

  2. Solid targets for 99mTc production on medical cyclotrons

    International Nuclear Information System (INIS)

    Hanemaayer, V.; Buckley, K.R.; Klug, J.; Ruth, T.J.; Schaffer, P.; Zeisler, S.K.; Benard, F.; Kovacs, M.; Leon, C.

    2014-01-01

    Recent disruptions in the molybdenum-technetium generator supply chain prompted a review of non-reactor based production methods for both 99 Mo and 99m Tc. Small medical cyclotrons (E p ∼ 16-24 MeV) are capable of producing Curie quantities of 99m Tc from isotopically enriched 100 Mo using the 100 Mo(p,2n) 99m Tc reaction. Unlike most other metallic target materials for routine production of medical radioisotopes, molybdenum cannot be deposited by reductive electroplating from aqueous salt solutions. To overcome this issue, we developed a new process for solid molybdenum targets based on the electrophoretic deposition of fine 100 Mo powder onto a tantalum plate, followed by high temperature sintering. The targets obtained were mechanically robust and thermally stable when irradiated with protons at high power density. (author)

  3. A neutral lipophilic complex of sup(99m)Tc with a multidentate amine oxime

    International Nuclear Information System (INIS)

    Troutner, D.E.; Volkert, W.A.; Hoffman, T.J.; Holmes, R.A.

    1984-01-01

    Propylene amine oxime, 3,3'-(1,3-propanediyldiimino)bis(3-methyl-2-butanone)dioxime, (PnAO) forms a neutral lipophilic complex with sup(99m)Tc in >95% yield at room temperature at pH 5-10. The complex can be prepared with generator produced sup(99m)Tc using 10 -5 M SnC 4 H 4 O 6 as the reducing agent at ligand concentrations as low as 3 x 10 -5 M. It is stable in saline solutions for as long as 24 h. [Sup(99m)Tc]PnAO may be useful as an imaging agent which passively diffuses across the blood brain barrier. (author)

  4. Sup(99m)Tc-Sn-pyrophosphate complex. A stable, lyophilized radiopharmaceutical for skeletal scanning

    Energy Technology Data Exchange (ETDEWEB)

    Cvoric, J; Jovanovic, V; Bzenic, J [Institut za Nuklearne Nauke Boris Kidric, Belgrade (Yugoslavia); Stefanovic, Lj; Selir, Z [Institute for Tuberculosis and Pectoral Diseases, Radioisotope Applications, Sremska Kamenica (Yugoslavia)

    1978-01-01

    After a systematic investigation of the different phosphate polymers, viz. hexametaphosphate, tripolyphosphate, meta- and diphosphonate, pyrophosphate (Na/sub 4/P/sub 2/O/sub 7/) was selected for sceletal scintigraphy. A procedure has been developed for obtaining a sup(99m)Tc-labelled Sn(II): PyP complex by addition of a sterile, apyrogenic pertechnetate solution from a sup(99m)Tc-generator to a lyophilized solution of Sn(II)-tetrasodium phosphate. ''Kit'' composition was determined on the basis of biodynamic data obtained when the Sn/pyrophosphate ratio, pH and other parameters were varied. In vivo distribution of different sup(99m)Tc-Sn-pyrophosphate complexes permitted the selection of the most suitable complex for sceletal scanning. The investigated complex is being successfully applied in human scintigraphy of bones in the Laboratory for Radioisotope Applications of the Institute for Tubercolosis and Pectoral Diseases in Sremska Kamenica.

  5. Nitriles form mixed-coligand complexes with 99mTc-HYNIC-Peptide

    International Nuclear Information System (INIS)

    Liu Guozheng; Wescott, Charles; Sato, Aaron; Wang Yi; Liu Ning; Zhang Yumin; Rusckowski, Mary; Hnatowich, Donald J.

    2002-01-01

    Using a 12-amino acid peptide conjugated with HYNIC as a model, we investigated nitriles as possible coligands for labeling with 99m Tc. After the preparation of the 99m Tc labeled HYNIC-peptide using tricine as coligand, the addition of acetonitile was found by reverse phase HPLC to block further coligand exchange with ethylenediamine diacetic acid (EDDA) at room temperature. The addition of this nitrile changed the pharmacokinetics of the 99m Tc labeled peptide in normal mice towards faster clearance and significant differences in accumulation in most tissues sampled. By replacing acetonitrile with cyanoacetate, a nitrile not present in the HPLC eluant, it was possible to show the existence of a new, more hydrophilic, species by reverse phase HPLC. We conclude that nitriles can act as coligands for HYNIC-conjugated peptides labeled with 99m Tc and tricine. Furthermore, the presence of acetonitrile during Sep-Pak or HPLC purification may inadvertently generate a mixed tricine/acetonitile coligand 99m Tc-HYNIC-peptide complex

  6. Process modifications of obtaining Tc-99m by solvent extraction

    International Nuclear Information System (INIS)

    Leon, A.; Verdera, S.

    1978-01-01

    This paper describes a modification in the process to obtaining Tc-99m by the extraction method of solvent from Mo-99 produced by irradiation. Tc-99m is considered an ideal radionuclide for medical and biological applications

  7. Advances in technetium chemistry towards 99mTc receptor imaging agents

    International Nuclear Information System (INIS)

    Johannsen, B.; Spies, H.

    1997-01-01

    The development of the chemistry of technetium and its non-radioactive surrogate rhenium has been prompted by the trends and needs of nuclear medicine, which predominantly uses 99m Tc radiopharmaceuticals for a broad range of diagnostics. Technetium-99m is the ideal radioisotope for tomographic single-photon emission tomography (SPECT) imaging due to its nuclear properties (6.2 h, E γ 140 keV) and ready availability through generator systems. Transition metals offer many opportunities for designing molecules by modifying the environment around the core, allowing certain biological properties to be imposed upon the molecule. Whereas research in the past was mainly concerned with biological properties that allow relatively unspecific functional imaging, as in brain or myocardium perfusion studies, nuclear medicine is now requiring more and more biochemical information on low capacity, high specificity targets. Many research groups have become involved in the search for new technetium-based compounds, called the third generation of 99m Tc radiopharmaceuticals, that employ the principles of modern pharmacology to achieve biochemical specificity. There has been considerable interest in imaging CNS and other receptors with 99m Tc receptor-binding ligands. Such a 99m Tc CNS receptor-imaging agent is currently not yet in use because of the significant hurdles to be overcome in attaining this ambitious goal. However, some Tc and Re complexes of remarkable affinity in vitro, and the first high-affinity 99m Tc probes able to label the dopamine transporter in the brain by SPECT imaging prove the feasibility of this approach. (Author)

  8. MIBI-99mTc mammary scintigraphy

    International Nuclear Information System (INIS)

    Mayosky, Maria C.; Parma, Elvira P.; Armesto, Amparo M.; Zarlenga, Ana C.; Cresta, Carlos; Azar, Maria E.; Noblia, Cristina

    1999-01-01

    121 patients suspected of breast cancer were studied with MIBI- 99m Tc to evaluate the suitability of the mammary scintigraphy in patients with doubtful cancer diagnosis.The results show 93 % sensitivity and 95 % specificity and indicate the usefulness of this procedure to increase the accuracy of the diagnosis

  9. Participation in CEN TC 335 TC343 Chemical Test Methods. Final report; Deelname CEN TC 335 TC343 Chemical Testmethods. Eindrapportage

    Energy Technology Data Exchange (ETDEWEB)

    Bakker, F.P. [ECN Engineering en Services, Petten (Netherlands)

    2006-12-15

    An overview is given of the work that has been done on the standardization of methods for the characterization of biofuels and solid recovered fuels (SRF). For biofuels a complete set of prestandards is available, conversion of pre-standards to standards is in good progress. The development of a standard biocarbon content method based on the {sup 14}C isotope measurement is in good progress. This standard could be an important tool for carbon dioxide trading purposes. CEN is the European Commission for Standardization, TC 335 is the Technical Committee 335 on Solid Biofuels, and TC 343 is the Technical Committee on Solid Recovered Fuels. [Dutch] In de periode september 2005 tot december 2006 zijn Europese standaarden voor de karakterisering van biobrandstoffen beschikbaar gekomen. Voor een aantal parameters is nader onderzoek vereist en deels gaande. Dankzij de ervaring die in Nederland is opgedaan met Nationale Technische Afspraken (NTA's) voor vaste biobrandstoffen heeft onze bijdrage aan de Europese normering de invoering daarvan zeker bespoedigd. De 14C groendeel bepaling begint terrein te winnen en zal in de nabije toekomst ook bij verdere implementatie van het Kyoto protocol een rol gaan spelen. CEN is de European Commission for Standardization, TC 335 is de Technical Committee 335 over Solid Biofuels, en TC 343 is de Technical Committee over Solid Recovered Fuels.

  10. The Gel Generator option

    International Nuclear Information System (INIS)

    Boyd, R.E.

    1999-01-01

    The development of a national policy for guaranteeing an ample supply of 99m Tc to nuclear medicine, involves issues which go beyond the means by which radioactivation is achieved. Indeed, in such an exercise the pragmatic dictates of business and the sensitivities of politics must also be taken into account. Furthermore where a preference towards the nuclear reactor or the potential of cyclotrons is being questioned, the debate is incomplete if the only options that are considered are the fission-based 99 Mo generator versus the direct cyclotron production of 99m Tc. There is a third option (also neutron γ-based), an alternative to the fission 99 Mo generator, which ought not be overlooked. The application of low specific activity (n,γ) 99 Mo to a new type of generator, the Gel Generator, has been the focus of much research, particularly in Australia and more recently in China. After the initial concept had been established in the laboratory, the Australian researchers then undertook a comprehensive program of tests on the Gel Generator to assess its potential, either in the clinical laboratory or the centralised radiopharmacy, for supplying 99m Tc suitable for nuclear medicine. The outcome of this program was a clear indication that the Gel Generator innovation had the capability to provide both technical and economic advantages to the nuclear medicine industry. These advantages are described. Since that time the Gel Generator has been selected for routine use in China where it now satisfies more than 30% of the 99m Tc demand. (author)

  11. Compuestos nitrogenados indicadores de estrés en respuesta a las dosis tóxicas y deficientes de Nitrógeno en frijol ejotero

    Directory of Open Access Journals (Sweden)

    Esteban Sánchez

    2016-01-01

    Full Text Available Introducción: Un amplio rango de estreses ambientales, tales como baja temperatura, sequía, alcalinidad, salinidad, deficiencia y toxicidad de nutrientes son potencialmente dañinos para las plantas. El papel del nitrógeno como nutriente esencial y componente estructural de aminoácidos, proteínas, ácidos nucleicos y otros constituyentes esenciales para el desarrollo ha sido ampliamente documentado en varias especies debido a la importancia en los procesos de crecimiento y producción agrícola. Sin embargo, en la actualidad, existe escasa literatura del efecto de la deficiencia y toxicidad de nitrógeno sobre los compuestos osmoreguladores como indicadores de estrés en plantas. Por lo que el objetivo del presente trabajo fue estudiar los compuestos nitrogenados indicadores de estrés (prolina, glicinabetaina y colina en respuesta a las dosis tóxicas y deficientes de N en frijol ejotero desarrollado en cámara de cultivo bajo condiciones controladas y sistema hidropónico. Método: El nitrógeno fue aplicado a la solución nutritiva en la forma de NH4NO3 y en dosis crecientes: N1 = 1.5 mM, N2 = 3.0 mM, N3 = 6.0 mM, N4 = 12.0 mM, N5 = 18.0 mM y N6 = 24.0 mM de N. Los parámetros analizados fueron la acumulación de biomasa, la concentración de prolina, glicinabetaina y colina en hojas, raíces, semillas y vainas de frijol ejotero cv. Strike. Resultados: La aplicación de dosis deficientes y tóxicas de N afectó la producción de biomasa en frijol, siendo las dosis tóxicas las que afectaron más este parámetro. Por otro lado, resaltar que los osmoreguladores prolina, glicinabetaina y colina solamente se acumularon bajo condiciones de toxicidad de N (N6, sin embargo, en condiciones de estrés provocado por la deficiencia de N (N1 no se produce la acumulación de estos compuestos. Discusión o Conclusión: Los compuestos nitrogenados indicadores de estrés solamente se acumulan bajo condiciones de toxicidad de N (N6, sin embargo en

  12. Production of radiopharmaceutical 99mTc using wasteless reactor Zr-Mo gel-technology

    International Nuclear Information System (INIS)

    Savushkin, I.; Gurko, O.; Ravkova, E.

    2002-01-01

    An original methodology and technological process of the wasteless reactor gel-technology of 99m Tc producing on the basis of centralised Zr-Mo gel-generator have been developed by the Institute of Power Engineering Problems, National Academy of Sciences of Belarus in co-operation with the Research Institute of Oncology and Medical Radiology, Ministry of Health of Belarus. This approach allows 99m Tc to be produced on the basis of MoO 3 with an 99 Mo activity of 3-20 Ci. The technological process of 99m Tc sodium pertechnetate production is remotely controlled and automated. Based on clinical tests performed by the Ministry of Health of Belarus, the clinical application of 99m Tc produced by this technology has been approved. The irradiation conditions of the target, consequence of technological process, technological yield of objective product on the example of operation of one generator, reprocessing and rendering of the wastes are analysed and described. The distinctive features of the technology developed are as follows: (a) Use of native molybdenum as the starting target. (b) Absence of deleterious and toxic impurities from the final product (nitrates, organics, etc.). (c) Application of a modified method of 99m Tc extraction from 99 Mo with the help of the Zr-Mo-gel (that is, application of a true gel, not the powder obtained by gel drying), reducing the number of process stages and simplifying the technology. (d) Easy automation and remote control. (e) Simplicity of design and compactness, opening up wide application fields for the unit. It is suggested that clinical centres should be equipped with centralised high-performance 99m Tc generators. Such centres can supply 99m Tc sodium pertechnetate daily to radioisotope laboratories within the radius of 100 km. Technical and economic calculations show that the centralised gel-generators possess industrial, technical and economic parameters making them superior to small/portable generators based on loading with

  13. Emission of Tc-99 from nuclear facilities

    International Nuclear Information System (INIS)

    Luxenburger, H.J.; Schuettelkopf, H.; Bohn, B.

    1984-11-01

    No noticeable Tc-activities are emitted from nuclear power stations. The emissions with the gaseous effluents exceed but rarely the detection limit of 25 nCi/h. Likewise, the emission with the liquid effluents remains below the detection limit of about 0.5 nCi/m 3 . Neither can a remarkable emission be recorded from the facilities of the Central Decontamination Services Department (HDB) of KfK. The emissions from the evaporation system for low level solutions and from the evaporation system for low level solutions and from the incineration facility for solid wastes do not exceed or rarely exceed to a minor extent the detection limit of 0.3 pCi/m 3 waste air. Also with the liquid effluents only minor Tc-amounts are discharged of 0.3 nCi/m 3 at the maximum. In the distillate of the medium level solutions discharged from the Karlsruhe Reprocessing Plant (WAK) to HDB as so-called tritiated water 2 nCi/m 3 Tc-99 at the maximum are contained. Only in the gaseous effluents from the evaporation system for medium level solutions emissions of up to 14 pCi/m 3 can be detected. The detection limits are almost permanently exceeded by the gaseous effluents from WAK. Small amounts of Tc-99 of 7 pCi/m 3 exhaust air at the maximum are released to the environment. However, the amount of Tc accumulated over the sampling period is insignificant from the radioecological point of view. (orig./HP) [de

  14. Disminución de las propiedades mecánicas de compuestos de matriz termoplástica tras dilatada permanencia en agua oxigenada

    Directory of Open Access Journals (Sweden)

    Viña, J.

    2001-04-01

    Full Text Available The evolution of the mechanical properties, static and dynamic, of two different composites with thermoplastic matrix and glass-fiber fabric or carbon-fiber fabric as reinforcement after immersing in a hydrogen peroxide solution have been analyzed. The tensile strength suffered a decrease after exposure of the materials in the solution. This decrease was more important in the case of the glass-fiber composite than in carbon-fiber composite. On the other hand, the interlaminar shear strength suffered also an important decrease, but in this case more substantial for the carbon-fiber composite. Finally, the fatigue behavior of the materials have been studied after exposure to the hydrogen peroxide solution. The results correlate with the tensile results.

    Se ha analizado la evolución de las propiedades mecánicas, tanto estáticas como dinámicas, de dos composites de matriz termoplástica reforzados con tejido de fibra de vidrio y fibra de carbono, tras mantener inmersas probetas de ambos materiales en una solución de agua oxigenada, empleada en el método TCF, útil en la fabricación de papel. Se observa, desde el punto de vista de la resistencia a tracción, una pérdida de propiedades mucho mayor en el caso del compuesto con fibra de vidrio que en el de fibra de carbono. En cambio, en las curvas correspondientes a la variación de la resistencia a cortadura interlaminar, se aprecia una pérdida muy importante, pero superior para el compuesto de fibra de carbono. Por último, también se mostrará el comportamiento de ambos compuestos a fatiga tras permanencia en la solución de agua oxigenada. Los resultados obtenidos muestran una gran correlación con los generados a partir de los ensayos de tracción.

  15. Evaluación de dos silanos en compuestos deetilenvinilacetato y harina TelinneMonspessulana//Evaluation of two silanes in ethylenevinylacetate and TelinneMonspessulana flour compounds

    Directory of Open Access Journals (Sweden)

    Oscar Buitrago-Suescun

    2015-09-01

    Full Text Available Se realizó un estudio comparativo del efecto que produce la adición de agentes de acoplamiento tipo silanovinyltrimethoxysilano y 3-aminopropiltrietoxisilano sobre la mezcla de etilenvinilacetato con harina de TelinneMonspessulana. La incorporación de agentes de acoplamiento se hizo de manera directa sobre la mezcla empleando harina sin tratar y mercerizada. También se hicieron ensayos mezclando etilenvinilacetatoy harina injertada previamente con cada uno de los silanos. Los compuestos fueron sometidos a ensayos de tensión con el fin de evaluar los agentes de acoplamiento. Se encontró que la adición delsilano amino durante el mezclado de los compuestos aumentó la resistencia a la tracción, siendo un importante resultado pues estos son materiales livianos aplicables en la industria de construcción y automotriz.Palabras claves: etilenvinilacetato, harina telinnemonspessulana, compuestos de plástico con madera, agente de acoplamiento silano, viniltrimetoxisilano, aminopropiltrietoxisilano._____________________________________________________________________________AbstractA comparative study the effect of the addition of silane coupling agents, vinyltrimethoxysilane and 3-aminopropyltriethoxysilane on ethylenevinylacetate and Telinnemonspessulana flour composites was performed. The silane coupling agents were added in the mixing stage of ethylene vinyl acetate and wood flour (untreated and mercerized. Tests were also made by mixing ethylenevinylacetate with previously grafted wood flour. Flour graft was performed with vinyltrimethoxysilane and 3-aminopropiltrietoxisilano. The compounds were tested for tensile testing to evaluate the coupling agents. It was found that the addition of amino-silane during mixing increased tensile strength, being this an important result since these are lightweight materials that can be used in the construction and automobile industry. Key words: ethylene-vinyl acetate, telinnemonspessulana flour, wood

  16. Synthesis and formulation of {sup 99m} Tc-ECD radiopharmaceutical; Sintesis y formulacion del radiofarmaco {sup 99m} Tc-ECD

    Energy Technology Data Exchange (ETDEWEB)

    Ocampo G, B E

    1998-06-01

    Nuclear medicine is a medical specialty which uses radioactive compounds (radionuclides) for diagnostic and therapeutic purposes. {sup 99m} Tc is the more common radionuclide used in many studies in nuclear medicine because its advantages: it has a photopeak of 140 KeV and a half-life of 6 hours; it can be eluted from a Molybdenum 99 generator, so radiopharmaceuticals can be prepared on site. Ethyl cysteine dimer (ECD) labelled with reduced Technetium 99m has been purposed recently as a promising radiopharmaceutical for brain perfusion imaging {sup 99m} Tc-ECD is a lipophilic neutral complex which cross the brain blood barrier and show high brain uptake. The objective of this work was synthesize and to design a freeze dried formulation for the instant preparation of {sup 99m} Tc-ECD complex useful for brain perfusion imaging. We obtained a freeze dried stable formulation for the preparation of {sup 99m} Tc-ECD kit with a radiochemical purity higher than 90 %, which fulfills with the quality control of radiopharmaceuticals. Furthermore, we developed analytic techniques for the determination of the different chemical compounds into the lyophilized kit. (Author).

  17. Occurrence and behaviour of Tc in the environment

    International Nuclear Information System (INIS)

    Luxenburger, H.J.; Schuettelkopf, H.

    1984-08-01

    A literature research was performed about the occurence and the behaviour of Tc in the environment. About 3600 publications, published between 1925 und 1983, were evaluated. The actual knowledge about Tc in the environment within extended regions is fragmentary. A lot of necessary informations about the behaviour of Tc in the environment are lacking completely. (orig.) [de

  18. Tc Chemistry in HLW: Role of Organic Complexants

    International Nuclear Information System (INIS)

    Hess, Nancy S.; Conradsen, Steven D.

    2003-01-01

    Tc complexation with organic compounds in tank waste plays a significant role in the redox chemistry of Tc and the partitioning of Tc between the supernatant and sludge components in waste tanks. These processes need to be understood so that strategies to effectively remove Tc from high-level nuclear waste prior to waste immobilization can be developed and so that long-term consequences of Tc remaining in residual waste after sludge removal can be evaluated. Only limited data on the stability of Tc-organic complexes exists and even less thermodynamic data on which to develop predictive models of Tc chemical behavior is available. To meet these challenges we are conducting a research program to study to develop thermodynamic data on Tc-organic complexation over a wide range of chemical conditions. We will attempt to characterize Tc-speciation in actual tank waste using state-of-the-art analytical organic chemistry, separations, and speciation techniques to validate our model. On the basis of such studies we will develop credible model of Tc chemistry in HLW that will allow prediction of Tc speciation in tank waste and Tc behavior during waste pretreatment processing and in waste tank residuals

  19. Ausencia de equivalencia terapéutica de 7 productos genéricos de lincomicina comparados con el compuesto original

    Directory of Open Access Journals (Sweden)

    Omar Vesga

    2004-02-01

    Full Text Available

    La equivalencia farmacéutica (EF como prueba de equivalencia terapéutica (ET para productos genéricos parenterales (PG es un dogma ampliamente difundido y aceptado, pero nunca se ha retado experimentalmente [1]. Comparamos la magnitud de los parámetros farmacodinámicos (PD de los genéricos de lincomicina (LIN con los del compuesto original (CO, mediante determinación de su eficacia bactericida in vitro e in vivo.

     

     

  20. Síntesis de tionitritos : Estudios de las estructuras electrónica y molecular para una familia de compuestos elusivos

    OpenAIRE

    Cánneva, Antonela

    2016-01-01

    Los compuestos del tipo S-nitrosotioles (también conocidos como tionitritos) contienen un grupo nitroso unido a un átomo de azufre, con fórmula general RSNO. Un grupo de S-nitrosotioles de alquilo fue preparado tempranamente en el año 1909 por Tasker y Jones mediante la reacción de alcanotioles (RSH) con cloruro de nitrosilo. A la largo del siglo pasado, se reportó un número menor de estudios relacionados con la síntesis y el estudio de propiedades fisicoquímicas y espectroscópicas de algunos...

  1. Síntesis sustentable de compuestos de interés agroquímico: chalconas, benzodiazepinas, y 1,2,3,4-tetrahidroisoquinoleínas

    OpenAIRE

    Pasquale, Gustavo Antonio

    2014-01-01

    Se aplican los postulados de la Química Verde a la preparación de compuestos orgánicos de interés agroquímico de la familia de Chalconas, Benzodiazepinas, y 1,2,3,4-tetrahidroisoquinoleinas. En particular se prepararon y caracterizaron una serie de catalizadores heterogéneos. Se estudiaron catalizadores de Wells-Dawson, Preyssler y materiales híbridos a base de sílice funcionalizados con 3-aminopropiltrietoxisilano. Se estudió la reutilización de los mismos. Se optimizaron las condiciones de ...

  2. Desarrollo de una metodología para la fabricación de injertos compuestos de polvo de hueso y un biopolímero

    OpenAIRE

    Sandra Quevedo-B.; Fabio A. Rojas-M.; Argemiro Michael Sanabria

    2006-01-01

    El propósito de este trabajo es presentar el desarrollo de una metodología para producir implantes a partir de materiales compuestos a base de una mezcla de polvo de hueso cortical bovino y ABS (poliacrilonitrilo - butadieno - estireno). La morfología del polvo y sus dimensiones, así como el porcentaje del mismo en la mezcla, fueron establecidos como las variables de diseño del estudio realizado en este primer intento para producir objetos a partir de biomateriales híbridos par...

  3. Caracterización de los compuestos aromáticos en embutidos crudos curados y estudio de los factores que afectan a su generación.

    OpenAIRE

    Marco Celdrán, Aurora

    2007-01-01

    RESUMEN Los objetivos de esta tesis consistían en determinar y caracterizar los principales compuestos aromáticos responsables del aroma típico a curado de los embutidos crudos curados; y determinar el efecto del uso de diferentes sales de curado y la aplicación de diferentes procesos de fermentación, en la generación de los mismos. Para determinar el efecto de las sales de curado y del proceso de fermentación en los embutidos, se realizaron dos fabricaciones de embutidos de gran calibre. ...

  4. Estudio químico de los compuestos lipídicos de las hojas, tallos y flores de Vernonanthura patens (Kunth) H. Rob. (Asteraceae)

    OpenAIRE

    Manzano Santana, Patricia; Miranda Martínez, Migdalia; Montes de Oca Porto, Rodney; Orellana León, Tulio; Abreu Payrol, Juan; Peralta García, Esther L

    2013-01-01

    Introducción: Vernonanthura patens (Kunth) H. Rob. es una especie que crece silvestre en el Ecuador, para la cual existen escasos antecedentes de estudios químicos y biológicos, y en ninguno de estos se aborda el estudio de fracciones lipídicas. Objetivos: estudiar las fracciones de compuestos lipídicos presentes en las hojas, tallos y flores de la especie. Métodos: la planta se recolectó en estado adulto, en época de floración, los órganos vegetales fueron secados en estufa por separado, se ...

  5. Eliminación de compuestos orgánicos e inorgánicos mediante procesos híbridos UF-MIEX®

    OpenAIRE

    Alcario Salazar, Jennifer

    2014-01-01

    El agua es fundamental para la vida, tanto humana como animal o vegetal, pero puede llegar a ser perjudicial si no se aplican los controles oportunos que garanticen su inocuidad. Su contaminación puede estar provocada por residuos agrícolas, industriales o domésticos. Así pues, una de las problemáticas del agua es la elevada concentración de compuestos orgánicos e inorgánicos como podrían ser el ácido húmico, los aniones y los cationes. Por este motivo, se debe de ejercer un control estric...

  6. El modelo v.s.p. en lechuga batavia lactuca sativa var. capitata l. y respuesta de dos variedades a las aplicaciones de compuestos orgánicos

    OpenAIRE

    Vélez M., José F.; Garzón, José L.; Bruzón C., Serapio F.

    2010-01-01

    En el Corregimiento Pavitas, municipio de La Cumbre, en la Finca Santafé, a 1.480 msnm en un suelo de la Asociación Pavas (Aeric Tropaquept) se probó el modelo vaso-sustrato-planta (VSP), en la producción de plántulas de lechuga Batavia L. sativa var. capitata y el efecto en la producción de los compuestos orgánicos, cachaza, lombricompuesto, gallinaza y bovinaza, incorporados al suelo. Los 22 tratamientos con cuatro repeticiones, repartidos en dos variedades (Great Lake 118 y Pacific) corres...

  7. Síntesis de compuestos organoselénicos derivados del hidroxitirosol. Determinación de su actividad como antioxidantes

    OpenAIRE

    Gómez Carretero, Antonio

    2012-01-01

    Texto completo descargado desde Teseo 1. Introducción Los polifenoles son una amplia familia de compuestos que se encuentran, entre otros alimentos, en la fruta, la verdura, el vino, el té, el cacao y el aceite de oliva virgen extra y que muestran una marcada actividad antioxidante, que se traduce en una contrastada actividad en la prevención de enfermedades cardiovasculares, cáncer, enfermedades neurodegenerativas, diabetes u osteoporosis . Uno de los polifenoles más efectivos como ...

  8. Comparación de las propiedades de compuestos en base de polipropileno en mezcla con diversos residuos agroindustriales del Ecuador

    OpenAIRE

    Tapia, Clotario; Paredes, Cecilia; Correa, Carlos

    2009-01-01

    El desarrollo de los llamados Wood Plastic Composites (WPC) en los últimos cinco años ha sido vertiginoso, presentando una alternativa eficiente a los tradicionales refuerzos minerales como el CaCO3 en los compuestos en base termoplástica. Al ser Ecuador un país con una economía fuertemente dependiente del desarrollo agrícola, es importante el plantear alternativas para la explotación sustentable de su suelo. En el siguiente trabajo se presenta ensayos realizados a residuos agroindustriales c...

  9. Development of 99mTc extraction techniques from 99Mo by (n,γ) reaction

    International Nuclear Information System (INIS)

    Kimura, Akihiro; Hori, Naohiko; Tsuchiya, Kunihiko; Ishihara, Masahiro; Yamabayashi, Hisamichi; Tanase, Masakazu; Fujisaki, Saburo; Sato, Yuichi

    2010-11-01

    Investigation of production method of 99 Mo by (n, γ) reaction, where the processing is relatively simple and generating less amount of radioactive waste, is conducted in the Neutron Irradiation and Testing Reactor Center. The 99 Mo is adsorbed to highly efficient adsorbent PZC after neutron irradiation and 99m Tc is eluted. However, radioactivity concentration of the 99m Tc solution obtained from PZC column loaded with 99 Mo derived by (n, γ) method is lower than that obtained from alumina column with 99 Mo by (n, f) method due to extremely low specific activity of (n, f) 99 Mo. Therefore, it is necessary to develop technique for increasing the amount of 99 Mo and the 99m Tc solution of high radioactivity concentration (minimum: 1Ci/ cm 3 ). In this study, the preliminary fabrication tests using high density MoO 3 pellets were carried out to increase the production of 99 Mo. The method of concentrating 99m Tc solution through solvent extraction with MEK was investigated and a device for this concentration process was also developed. In the preliminary tests of the MoO 3 pellets, the pellets having high density were successfully fabricated by the SPS method. Additionally, it was ascertained that the pellets can be dissolved with 6M-NaOH solution completely. The test for 99 Mo adsorption followed by 99m Tc elution using PZC was carried out. As the result, amount of Mo adsorbed to 1g-PZC was about 250mg, and 99m Tc yield was about 80%. In the concentration test using Re solution instead of 99m Tc solution, it was ascertained that the concentration efficiency is higher than 80% of the theoretical value. A concentration device for 99m Tc solution could be realized based on the method employed in the present experiments. The outcomes of development of 99m Tc extraction techniques from 99 Mo by (n,γ) reaction was reviewed in this paper, and the contents were presented in the 3rd International Symposium on Material Test Reactors. (author)

  10. New bone-seeking agent. Animal study of Tc-99m-incadronate

    International Nuclear Information System (INIS)

    Shigematsu, Makoto; Shiomi, Susumu; Iwao, Hiroshi; Ochi, Hironobu

    2002-01-01

    Disodium cycloheptylaminomethylenediphosphonate monohydrate (incadronate disodium) is a third-generation bisphosphonate compound which potently inhibits bone resorption, and a highly effective drug in the treatment of metastatic bone disease. We first labeled incadronate disodium with 99m Tc, and examined its biodistribution and bone uptake after intravenous injection in rats to assess its potential for clinical use as a bone-seeking agent for judgment of the therapeutic effect of incadronate on bone metastases. Bone scan with 99m Tc-labeled incadronate ( 99m Tc-incadronate) may yield important information prior to the use of incadronate for treatment of bone metastases. Synthesis of 99m Tc-incadronate was carried out by reduction of 99m Tc-pertechnetate in the presence of SnCl 2 and N 2 gas. Normal rats were injected with 18.5 MBq (0.5 mCi) 99m Tc-incadronate in a volume of 0.1 ml intravenously and then sacrificed at 15 min, 30 min, 1 h or 2 h (six rats at each time point) after injection. Samples of muscle, stomach, small intestine, kidney, liver and bone (femur) were taken and weighed. In addition, a 1-ml sample of blood was drawn from the heart, and urine was taken from the urinary bladder immediately after sacrifice. Samples were measured for radioactivity and expressed as percent uptake of injected dose per gram or per milliliter (% ID/g or ml). Bone-to-blood and bone-to-muscle uptake ratios were determined from the % ID/g or ml values for these organs. The greatest accumulation of 99m Tc-incadronate was found in bone. Radioactivity in bone was as high as 3.22±0.68% ID/g at 2 hours after injection. Scintigraphic images of 99m Tc-incadronate in normal rats revealed highly selective skeletal uptake. 99m Tc-incadronate exhibited high uptake in bone, and relatively low uptake in soft tissue, suggesting that it may be useful as a bone-seeking agent for judgment of the therapeutic effect of incadronate on bone metastases, by determining the degree of its

  11. Mismatched uptake of Tc-99m-ECD and Tc-99m-HMPAO in subacute cerebral infarction: Tc-99m-ECD for viability and Tc-99m-HMPAO for flow restoration

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D. S.; Hyun, I. Y.; Kim, S. K. [College of Medicine, Seoul National Univ., Seoul (Korea, Republic of)] [and others

    1997-07-01

    Tc-99m-HMPAO reflects tissue perfusion but Tc-99m-ECD uptake is affected by tissue viability in addition to tissue perfusion which the varied state of cellular retention of Tc-99m-ECD reflects. Luxuriously perfused area on Tc-99m-HMPAO SPECT implies that this cortex was already reperfused either spontaneously or after thrombolysis and that accompanied paralysis of vascular reactivity in those zones warms progressive deterioration. We tried to find out if we can use sequential Tc-99m-ECD/Tc-99m-HMPAO SPECT to reveal cortical perfusion and severity and range of risky areas of cerbral cortex despite reperfusion in sub-acute infarction. In 13 patients (M ; F =7 : 6, mean age 57 (range: 26-84)) with cortical (n=12) and basal ganglia infarction (1), we performed sequential Tc-99m-ECD/Tc-99m-HMPAO SPECT at the same position. At first, 555 MBq of Tc-99m-ECD was injected and imaged and then 1110 MBq of Tc-99m-HMPAO was injected again and imaged with the patients in situ, and the first image (Tc-99m-ECD) and the subtracted image (2nd- 1st : Tc-99m-HMPAO) were compared slice by slice. Study was done from 3 days to 31 days (16{+-}9) after ictus. Tc-99m-ECD uptake was always less than or equal to Tc-99m-HMPAO uptake at the lesion in all cases. Luxury perfusion was prominent in four patients. Mismatched uptake was found in 10 patients. Severity of mismatch showed diverse spectrum and was ranged from total middle cerebral artery territory (1 case) to peripheral thin zones around infarction (2 cases). The other 7 showed intermediate amount of tissues with mismatch , i.e., Tc-99m-ECD defects where Tc-99m-HMPAO uptake is in part increased, normal or decreased. Upon discharge, patients having more uptake with Tc-99m-ECD predicted improvement. Patients having mismatched uptake went dichotomous way. In conclusion, Tc-99m-ECD/Tc-99m-HMPAO sequential SPECT is feasible and reveal both tissue perfusion (Tc-99m-HMPAO ) and discrepant Tc-99m-ECD uptake probably reflecting viability in acute

  12. Breast dosimetry in complementary radiotherapy with sodium pertechnetate-99m-Tc (Na99mTcO4-) balloon at neoplasia

    International Nuclear Information System (INIS)

    Lima, Carla Flavia de; Campos, Tarcisio P. R. de

    2013-01-01

    A dosimetric analyzes was performed at breast tissue in which a sodium pertechnetate- 99m Tc filled balloon was placed. An additional dose booster can be used as a complementary method to the surgical treatment in patients with breast cancer. The methodology involved the development of dosimetry in a physical phantom and a computational voxel model. Radiochromic films were calibrated providing dose versus optical density (OD) response from sample films taken at the surface of the balloon up to 10 cm far with the theoretical dose provided by MCNP modeling in water-equivalent model. A voxel model of the breast, developed at the SISCODES software, with an filled balloon inside was simulated at the MCNP code in order to generate the spatial dose distribution. Spatial dose distributions and the doses at surfaces of the breast, including those received in the chest wall, skin and lung were generated. The dosimetric results allow validating the dose in the tumor bed and adjacent health tissues. The simulations show that the application of sodium pertechnetate- 99m Tc implies high dose in the breast tissue adjacent to the tumor and preserves vital adjacent structures. As conclusion, the balloon presents itself as a viable option for the adjunctive treatment of breast cancer in patients who have appropriate indication. Irradiation with sodium pertechnetate- 99m Tc generates high doses in breast tissue and consequently in the tumor bed. Adjuvant radiation therapy in situ with sodium pertechnetate- 99m Tc balloon has low cost, availability and reduced time of treatment, decreasing the side effects of conventional radiotherapy. In progress, the dose versus OD mathematical representation will be used to identify absorbed doses at planar film placed at a breast phantom in order to generate maps of breast doses. (author)

  13. Efecto citotóxico de los compuestos de inclusión de paladio (II con β-ciclodextrina

    Directory of Open Access Journals (Sweden)

    Nancy Jaimes

    2016-12-01

    Full Text Available Introducción. Las tiosemicarbazonas y sus complejos de paladio (II poseen actividad antineoplásica con bajos efectos secundarios, por lo que son consideradas como una nueva alternativa terapéutica, sin embargo existen diferencias en los rangos de la CI50 asociada a la divergencia estructural y solubilidad de los complejos, así como a la sensibilidad de los blancos celulares. La inclusión de fármacos en la β-ciclodextrina con usos terapéuticos ha mejorado su solubilidad y estabilidad, no obstante, su combinación con los complejos de paladio (II y tiosemicarbazonas, aún no ha sido probada. Objetivo. Estudiar el efecto citotóxico de los complejos de paladio en la β-ciclodextrina. Materiales y métodos. La actividad citotóxica de los complejos de paladio con inclusión parcial en la β-ciclodextrina fue evaluada en la línea celular de cáncer de mama (MCF-7, empleando el método de la sulforodamina B. Resultados. Los ligantes (MePhPzTSC y (Ph2PzTSC, sus complejos de paladio (II libres e incluidos en β-ciclodextrina y el cisplatino, mostraron actividad citotóxica sobre la línea celular MCF-7, sin embargo la citotoxicidad fue mayor con la inclusión en la ß-ciclodextrina ([Pd(MePhPzTSC2]•ß-CD y [Pd(Ph2PzTSC2]•ß-CD. A concentraciones de 0,14 y 0,49µM, se obtuvo la CI50 para estos complejos, con dosis hasta 5 veces inferiores cuando se compararon con los resultados de los ligantes libres (1,4 y 2,9µM, con los complejos de paladio (II libres 0,57 y 1,24µM y con el cisplatino (6,87µM. Conclusiones: El uso de la β-ciclodextrina mejoró significativamente la actividad citotóxica de los complejos de paladio (II y tiosemicarbazonas, probablemente asociado al incremento de su solubilidad y biodisponibilidad del compuesto, estrategia que se puede sugerir para el diseño de futuros fármacos antineoplásicos.

  14. Biodegradación de los compuestos fenólicos presentes en el alpechín

    Directory of Open Access Journals (Sweden)

    Maestro Durán, R.

    1991-08-01

    Full Text Available Oil-mill wastewater is the main responsible of the pollution in Andalusian due to high content of organic substances. Its depuration by methanization is difficult because of the antimicrobial activity of phenolic derivatives. These compounds can be drastically reduced by a previous aerobic treatment of the oil mill wastewater with specific microorganisms. After this pretreatment, anaerobic depuration takes place without inhibition, the velocity of the reaction being 5 times higher than before the pretreatment. In this paper a qualitative study of the phenols present in oil-mill wastewater by thin layer chromatography has been done. Beside that, quantitative determination of total phenols, ortoand meta-diphenols as well as Chemical Oxigen Demand (COD before the treatment, after the pretreatment and after biomethanization have been carried out. Finally, leucoanthocyanins that could originate polymerized phenols have not been found.

    Las aguas residuales de la obtención del aceite de oliva o alpechines son responsables de la mayor contaminación medioambiental de Andalucía por su elevada carga de materia orgánica. Su depuración por biometanización es difícil debido a la actividad antimicrobiana de los compuestos fenólicos. Este tipo de sustancias puede eliminarse en gran parte tratando previamente el alpechín por vía aerobia con microorganismos específicos, después de lo cual la depuración anaerobia tiene lugar sin inhibiciones, siendo la constante de velocidad cinco veces superior a la de antes del pretratamiento. En este trabajo se hace un estudio cualitativo de los fenoles por cromatografía en capa fina y cuantitativo de los fenoles totales, orto- y meta-difenoles, así como de la Demanda Química de Oxígeno del alpechín antes del tratamiento, después del pretratamiento y después de la biometanización. Se ha comprobado también la ausencia de leucoantocianinas que pudieran dar origen a fenoles polimerizados.

  15. Actividad antioxidante de compuestos aislados del residuo no-volátil del aceite esencial de naranja.

    Directory of Open Access Journals (Sweden)

    Vargas-Arispuro, L.

    1998-04-01

    Full Text Available There has been a growing interest in the food industry and in preventive medicine to search for «natural antioxidants». Therefore the objetive of this study was to evaluate the antioxidant activity of the non-volatile residue of essential orange oil in the oxidation of unrefined and freshly extracted olive oil. Essential orange oil was distilled to obtain a non-volatile residue and fracctionated on a Silica Gel 60 column. The antioxidant activity was determined by measuring peroxide value obtained after heating olive oil at 70 °C for 48 h. Six compounds were isolated and purified, four of these had antioxidant activity, α-tocopherol and three methoxylated flavones were identified using spectroscopic methods. This study confirmed that non-volatile fractions of essential orange oil contain natural antioxidants diferent from α-tocopherol.

    Existe un creciente interés en la industria alimentaria y en la medicina preventiva por la búsqueda de «antioxidantes naturales», por lo que nos planteamos evaluar la actividad antioxidante del residuo no volátil del aceite esencial de naranja contra la oxidación del aceite de oliva sin retinar y de reciente extracción. Mediante destilación del aceite esencial de naranja se obtuvo el residuo no-volátil, el cual se fraccionó en columna de silica gel 60. La actividad antioxidante fue medida por el valor de peróxidos producidos por el aceite de oliva al provocar la oxidación por calentamiento a 70 °C durante 48 h. Se aislaron seis compuestos mediante HPLC preparativo de los cuales cuatro tuvieron actividad antioxidante. Usando métodos espectroscópicos se identificaron α-tocoferol y tres flavonas metoxiladas. Con este estudio se confirmó que la fracción no volátil del aceite esencial de naranja contiene antioxidantes naturales diferentes al α-tocoferol.

  16. Efecto del porcentaje de refuerzo frente al desgaste en compuestos de matriz metálica sinterizados con descarga luminiscente anormal

    Directory of Open Access Journals (Sweden)

    Pérez-Velásquez, Sandra

    2016-03-01

    Full Text Available In this study an analysis of the behavior of dry wear coefficient of a Metal Matrix Composite (MMC in 316 stainless steel reinforced with particles of titanium carbide (TiC according to ASTM G 99 standards, in a pin-on-disk test. In this research it is tested the effect of the percentage of reinforcement in the MMC manufactured with 3, 6 y 9% (vol. of TiC, in samples compacted at 800 MPa, generating different values of grain size, hardness and density, they are sintered with abnormal glow discharge, at a temperature of 1200 °C ±5 °C, with a protection atmosphere H2 – N2 and a permanence time of 30 minutes. According to the results obtained it is concluded that the best condition for the MMC manufacturing, in relation to the reinforcement percentage, is the one obtained when the mixture contains 6% of TiC compacted at 800 MPa. In these conditions, it was obtained: achieving smaller grain size, the greater hardness and the lowest coefficient of friction. In this respect, it was observed that the incorporation of the ceramic particles (TiC in a matrix of austenitic steel (316 shows significant improvements in the resistance to the wear.En este estudio se muestra un análisis del comportamiento del coeficiente de desgaste en seco de compuestos de matriz metálica (MMC, base acero inoxidable 316 reforzado con partículas de carburo de titanio (TiC de acuerdo con la norma ASTM G 99–05 en un tribómetro para la realización de ensayos de desgaste mediante el contacto y rozamiento de dos materiales entre sí, uno en forma de disco y otro en forma de varilla o bola (pin-on-disk. En el estudio se evalúa el efecto que tiene el porcentaje de refuerzo en los MMC fabricados con 3, 6 y 9% (vol. de TiC, en muestras compactadas a 800 MPa, dando lugar a diferentes valores de tamaño de grano, dureza y densidad, los cuales son sinterizados por medio de descarga luminiscente anormal, a una temperatura de 1200 °C ±5 °C, con atmósfera de protección de H2

  17. Targeting osteomyelitis with complete [99mTc]besilesomab and fragmented [99mTc]sulesomab antibodies: kinetic evaluations

    International Nuclear Information System (INIS)

    GRATZ, Stefan; KEMKE, Bendix; KEIZE, Patrik; KAMPEN, Wim U.; LUSTER, Markus; HÖFFKEN, Helmut

    2016-01-01

    The aim of this retrospective study was to compare the targeting of “pure” osteomyelitis (i.e., without surrounding soft tissue infection) by directly 99mTc-labelled complete immunoglobulin G (IgG) monoclonal antibody (MAb) ([99mTc]besilesomab) and by directly 99mTc-labelled fragment antigen-binding (FAb) MAb ([99mTc]sulesomab) in relation to their kinetic fate. A total of 73 patients with “pure” osteomyelitis were examined with [99mTc]besilesomab, (Scintimun®, IBA/CIS bio international, Saclay, France; N.=38) and [99mTc]sulesomab (LeukoScan®, Immunomedics Inc., Morris Plains, NJ, USA; N.=35). Kinetic data were deduced from whole-body and single-photon emission computed tomographic scans, performed 10 minutes to 24 hour p.i. (region-of-interest technique [ROI]). In targeting “pure” osteomyelitis, sensitivities at 1-4 hours were found to be higher for [99mTc]sulesomab (44% and 80% for [99mTc]besilesomab and [99mTc]sulesomab, respectively) but at significantly lower target/background (T/B) ratios than with [99mTc]besilesomab (1.8±0.3 versus 1.4±0.5 for [99mTc]besilesomab and [99mTc]sulesomab respectively; P<0.01). With [99mTc]besilesomab, there was a continuous osteomyelitis uptake over 24 hours, whereas with [99mTc]sulesomab, the maximal uptake occurred mostly within 1-4 hours, with subsequent clearance being slower for antigen-bound activity than for nonspecific background. Hence, diagnosis was possible mostly after 4h with [99mTc]sulesomab but often not before 24 hours with [99mTc]besilesomab, the later increasing significantly (P<0.01) in sensitivity (87% and 84% for [99mTc]besilesomab and [99mTc]sulesomab, respectively). These results show that the higher sensitivity of [99mTc]sulesomab in osteomyelitis targeting at earlier p.i. times does not rely on an increased antibody uptake but on a more rapid clearance of nonspecific background activity due to faster metabolism and excretion. Intact [99mTc]besilesomab show a slow, continuous uptake

  18. Electrolytic preparation of sup(99m)Tc human serum albumin using tin electrodes

    International Nuclear Information System (INIS)

    Narasimhan, D.V.S.; Mani, R.S.

    1975-01-01

    A method for labelling human serum albumin [HSA] with sup(99m)Tc using electrolytically generated Sn/II/ ions has been developed. The procedure uses Sn electrodes for electrolysis and gives high labelling yields. The amount of Sn released into the final product was found to be much less than the reported toxic levels. A ready-to-use kit for obtaining sterile sup(99m)Tc HSA is described. Tin metal wires sealed in aluminium were irradiated in a CIRUS reactor at a neutron flux of 7.5x10 12 n cm -2 sec -1 for one month. The 113 Sn produced in the wire was used for tracer studies with the electrolitically labelled HSA. sup(99m)Tc in the form sodium pertechnetate in 0.9% NaCl was obtained by methyl ethyl ketone extraction from alkaline solutions of neutron irradiated 99 Mo [specific activity 50-200 mCi/g] in the solvent extraction generator developed at Isotope Division, BARC. Radiochemical purity analysis of sup(99m)Tc labelled HSA prepared by the above procedure was carried out by ascending paper chromatography on Whatman No.1 paper, and 85% methanol and 0.9% sodium chloride as solvents. (F.Gy.)

  19. New superconductors from granular to high T$_{c}$

    CERN Document Server

    Deutscher, Guy

    2018-01-01

    How new are the high Tc superconductors, as compared to the conventional low Tc ones? In what sense are these oxides different from regular metals in their normal state? How different is the mechanism for high Tc superconductivity from the well-known electron-phonon interaction that explains so well superconductivity in metals and alloys? What are the implications of the new features of the high Tc oxides for their practical applications? This interesting book aims to provide some answers to those questions, drawing particularly on similarities between the high Tc oxides and granular superconductors, which also present a short coherence length, a small superfluid density and an inhomogeneous structure.

  20. New superconductors from granular to high T$_{c}$

    CERN Document Server

    Deutscher, Guy

    2006-01-01

    How new are the high Tc superconductors, as compared to the conventional low Tc ones? In what sense are these oxides different from regular metals in their normal state? How different is the mechanism for high Tc superconductivity from the well-known electron-phonon interaction that explains so well superconductivity in metals and alloys? What are the implications of the new features of the high Tc oxides for their practical applications? This book aims to give some answers to those questions, drawing particularly on similarities between the high Tc oxides and granular superconductors, which also present a maximum of their critical temperature near the metal-insulator transition.

  1. Bioaccumulation and chemical modification of Tc by soil bacteria

    International Nuclear Information System (INIS)

    Henrot, J.

    1989-01-01

    Bioaccumulation and chemical modification of pertechnetate (TcO 4 -) by aerobically and anaerobically grown soil bacteria and by pure cultures of sulfate-reducing bacteria (Desulfovibrio sp.) were studied to gain insight on the possible mechanisms by which bacteria can affect the solubility of Tc in soil. Aerobically grown bacteria had no apparent effect on TcO 4 -; they did not accumulate Tc nor modify its chemical form. Anaerobically grown bacteria exhibited high bioaccumulation and reduced TcO 4 -, enabling its association with organics of the growth medium. Reduction was a metabolic process and not merely the result of reducing conditions in the growth medium. Association of Tc with bacterial polysaccharides was observed only in cultures of anaerobic bacteria. Sulfate-reducing bacteria efficiently removed Tc from solution and promoted its association with organics. Up to 70% of the total Tc in the growth medium was bioaccumulated and/or precipitated. The remaining Tc in soluble form was entirely associated with organics. Pertechnetate was not reduced by the same mechanism as dissimilatory sulfate reduction, but rather by some reducing agent released in the growth medium. A calculation of the amount of Tc that could be associated with the bacterial biomass present in soil demonstrates that high concentration ratios in cultures do not necessarily imply that bioaccumulation is an important mechanism for long-term retention of Tc in soil

  2. Potential Ways to Address Shortage Situations of 99Mo/99mTc.

    Science.gov (United States)

    Filzen, Leah M; Ellingson, Lacey R; Paulsen, Andrew M; Hung, Joseph C

    2017-03-01

    99m Tc, the most common radioisotope used in nuclear medicine, is produced in a nuclear reactor from the decay of 99 Mo. There are only a few aging nuclear reactors around the world that produce 99 Mo, and one of the major contributors, the National Research Universal (Canada), ceased production on October 31, 2016. The National Research Universal produced approximately 40% of the world's 99 Mo supply, so with its shut down, shortages of 99 Mo/ 99m Tc are expected. Methods: Nuclear pharmacies and nuclear medicine departments throughout the United States were contacted and asked to provide their strategies for coping with a shortage of 99 Mo/ 99m Tc. Each of these strategies was evaluated on the basis of its effectiveness for conserving 99m Tc while still meeting the needs of the patients. Results: From the responses, the following 6 categories of strategies, in order of importance, were compiled: contractual agreements with commercial nuclear pharmacies, alternative imaging protocols, changes in imaging schedules, software use, generator management, and reduction of ordered doses or elimination of backup doses. Conclusion: The supply chain of 99 Mo/ 99m Tc is quite fragile; therefore, being aware of the most appropriate coping strategies is crucial. It is essential to build a strong collaboration between the nuclear pharmacy and nuclear medicine department during a shortage situation. With both nuclear medicine departments and nuclear pharmacies implementing viable strategies, such as the ones proposed, the amount of 99m Tc available during a shortage situation can be maximized. © 2017 by the Society of Nuclear Medicine and Molecular Imaging.

  3. Assessment of hepatocyte and kupffer cell function using Tc-99m DISIDA/Tc-99m tin colloid in thioacetamide-induced liver injury

    International Nuclear Information System (INIS)

    Ahn, B. C.; Chun, K. A.; Lee, J.; Lee, K. B.

    1997-01-01

    Toxic liver injury is not unusual in clinical field and liver biopsy is one of the most accurate method to define the severity of liver injury. But occasionally, it is impossible to obtain liver tissue in patients with acute toxic liver injury. The aim of this study is to evaluate the possibility of liver scintigraphy with Tc-99m DISIDA or Tc-99m tin colloid as a non-invasive tool in predicting functional status of hepatocyte and Kupffer cell and severity of liver injury. Intraperitoneal injection of thioacetamide was performed to make acute liver injury in mice and rats, and liver status was assessed by pathologic specimen and scintigraphic methods. Scintigraphic evaluation were performed by biodistribution of Tc-99m DISIDA or Tc-99m tin colloid in thioacetamide-treated mice. Liver time-activity curves were generated. Comparison between histologic data and scintigraphic data was done with SAS program. Thioacetamide-treated mice demonstrated hepatocyte necrosis in histologic examination and low liver/blood uptake ratios in biodistribution studies using both radiotracers. Biodistribution study using Tc-99m tin colloid revealed increased lung radioactivity in thioacetamide-treated mice. Twenty-four hours after thioacetamide administration, thioacetamide-treated rats demonstrated maximal hepatocyte necrosis and inflammation in histologic finding and delayed maximal uptake time (Tmax) and prolonged half time (T 1/2 ) of liver time-activity curve in liver scintigraphy. Histologic results and scintigraphic data were well correlated, and these two scintigraphic parameters (Tmax T 1/2 ) seemed to be good predictors of histologic change of liver. These data showed that liver injury could be assessed by non-invasive scintigraphic study in rat and mouse. This experimental study might be used as a animal model to evaluate the liver protecting drugs, and this scintigraphic study could be applied to acute toxic hepatitis for assessment of liver status in men

  4. Evaluation of the absorbed dose to the kidneys due to Tc99m (DTPA) / Tc99m (Mag3) and Tc99m (Dmsa)

    International Nuclear Information System (INIS)

    Vasquez A, M.; Murillo C, F.; Castillo D, C.; Rocha J, J.; Sifuentes D, Y.; Sanchez S, P.; Idrogo C, J.; Marquez P, F.

    2015-10-01

    The absorbed dose in the kidneys of adult patients has been assessed using the biokinetics of radiopharmaceuticals containing Tc 99m (DTPA) / Tc 99m (Mag3) or Tc 99m (Dmsa).The absorbed dose was calculated using the formalism MIRD and the Cristy-Eckerman representation for the kidneys. The absorbed dose to the kidneys due to Tc 99m (DTPA) / Tc 99m (Mag3), are given by 0.00466 mGy.MBq -1 / 0.00339 mGy.MBq -1 . Approximately 21.2% of the absorbed dose is due to the bladder (content) and the remaining tissue, included in biokinetics of Tc 99m (DTPA) / Tc 99m (Mag3). The absorbed dose to the kidneys due to Tc 99m (Dmsa) is 0.17881 mGy.MBq -1 . Here, 1.7% of the absorbed dose is due to the bladder, spleen, liver and the remaining tissue, included in biokinetics of Tc 99m (Dmsa). (Author)

  5. Obtención por vía pulvimetalúrgica de materiales compuestos de matriz de aluminio reforzados con nitruros

    Directory of Open Access Journals (Sweden)

    Fogagnolo, J. B.

    2000-08-01

    Full Text Available The use of aluminium metal matrix composites as structural materials is increasing continuously, mainly in the automotive and aerospace industries. The development of new kind of reinforcements is one of the areas of greater interest in current researches. This work investigates the use of nitrides as reinforcement for composite materials, with Al 6061 matrix, obtained by powder metallurgy and extrusion, presenting their microstructural features and their mechanical characteristics.

    La utilización de los materiales compuestos de matriz de aluminio como materiales estructurales está en continuo crecimiento principalmente en la industria automovilística y aeroespacial. El desarrollo de nuevos tipos de refuerzos es una de las áreas de mayor interés en las más actuales investigaciones. Este trabajo investiga el uso de nitruros como refuerzo en materiales compuestos, de matriz de aleación AA6061, obtenidos vía pulvimetalúrgica y extrusión, presentando los aspectos microestruturales y las características mecánicas.

  6. Comentarios críticos de la Norma UNE 7245 sobre "determinación de los compuestos de azufre contenidos en los áridos"

    Directory of Open Access Journals (Sweden)

    Calleja, José

    1982-06-01

    Full Text Available This paper shows some deficiences of the Spanish Standard Method UNE 7245 and the corresponding deficiences of the Spanish Concrete Code EH-SO adopting it. According to the actual Method, erroneous low values may result in determining sulphides and in general sulphur compounds in cocrete aggregates. Attention is drawn to the convenience of revising the limit of 1.2 per cent for the admissible maximum value of such compounds, particularly if they are exclusively formed by pyrites.

    Se ponen de relieve en este trabajo ciertas definiciones de la Norma UNE 7245 y las correspondientes de la Instrucción EH-80 que la adopta, en cuanto que la citada Norma puede dar valores erróneos por defecto en la determinación de sulfures y, en general, de compuestos de azufre en áridos para hormigón. Se llama la atención sobre la conveniencia de revisar el límite de 1,2 por ciento para el contenido máximo tolerable de dichos compuestos, particularmente si están constituidos en exclusiva por piritas.

  7. ESTUDIO COMPARATIVO DE LOS COMPUESTOS VOLÁTILES DE TRES VARIEDADES DE GUAYABA BLANCA (Psidium guajava L. DURANTE SU MADURACIÓN

    Directory of Open Access Journals (Sweden)

    Johanna Cantillo

    2011-05-01

    Full Text Available Regional Blanca (RB y Ráquira (RQ. Seutilizó el método Headspace-Microextracciónen Fase Sólida (HS-MEFS paracomparar los perfiles olfativos de tres variedadesde guayaba blanca de la regiónde la hoya del río Suárez (Santander, Colombiadurante tres etapas de maduración(verde, pintón y maduro. En las tresvariedades se presentó un comportamientosimilar, los aldehídos C-6 (hexanal,(Z-3-hexenal y (E-2-hexenal responsablesde la nota verde disminuyen durantela maduración, mientras que el contenidode ésteres (acetato de hexilo y acetato de(Z-3-hexenilo aumenta produciéndoselas notas dulce y frutal características dela fruta madura. Los compuestos ácidos,furánicos y alcoholes se observan en bajasproporciones durante las tres etapas.El análisis de los compuestos volátilesmediante HS-MEFS permitió estableceruna relación entre la transformación decompuestos aldehídos C6, responsablesde la nota verde, en ésteres análogos, alos cuales se les atribuye la nota frutalcaracterística durante el proceso demaduración.

  8. Accumulation of Tc-99m-MIBI and Tc-99m-tetrofosmin in tumor cells. Uptake and washout studies

    International Nuclear Information System (INIS)

    Rodrigues, M.; Aghajanian, A.A.; Sinzinger, H.; Kalinowska, W.; Zielinski, C.

    2002-01-01

    Aim: To investigate in-vitro the uptake and washout of Tc-99m-MIBI and Tc-99m-tetrofosmin in human breast adenocarcinoma and soft tissue sarcoma cell lines. Methods: The uptake of Tc-99m-MIBI and Tc-99m-tetrofosmin (at 37 0 C, 10, 30 and 60 minutes after incubation with 7.4x10E5 Bq each tracer) was investigated in breast adenocarcinoma MCF-7 and SK-BR-3 cells, synovial sarcoma SW 982 cells and chondrosarcoma SW 1353 cells (concentration of 1x10E6 cells/ml incubation medium). Tracer uptake in cells incubated with ouabain (Na/K-ATPase pump inhibitor; 100 μM and 1mM; 15 and 30 minutes), nigericin (increases mitochondrial potential and disrupts cell membrane potential; 5 and 50 μg/ml; 15 minutes) and carbonyl cyanide m-chlorophenylhydrazone (CCCP) (depolarizes mitochondrial membrane; 10 and 100 μM; 30 minutes) was compared to that in cells without incubation with chemical agents (control cells). The washout (at 37 0 C, 10-60 minutes, 30 and 60 minutes after tracer incubation) of Tc-99m-MIBI and Tc-99m-tetrofosmin was studied in MCF-7 cells, SK-BR-3 cells , SW 1353 cells and fibrosarcoma SW 684 cells. Results: Cellular tracer uptake decreased with ouabain (decrease of Tc-99m-tetrofosmin > Tc-99m-MIBI in SK-BR-3 cells and SW 982 cells) and increased with nigericin (increase of Tc-99m-MIBI > Tc-99m-tetrofosmin in all cells) as compared to the uptake in control cells. With CCCP, decrease of Tc-99m-MIBI uptake in cells preincubated with nigericin was higher than that in cells under basal conditions, whereas a similar decrease of Tc-99m-tetrofosmin uptake in these two group of cells was found. Washout of Tc-99m-MIBI from all cells was lower than that of Tc-99m-tetrofosmin. No significant difference in cell-associated activity of both tracers was found between washout after 30 minutes and that after 60 minutes of incubation, in all cells. Washout of Tc-99m-MIBI from SK-BR-3 cells Tc-99m-tetrofosmin) and Na/K-ATPase pump (Tc-99m-tetrofosmin > Tc-99m-MIBI). Tc-99m-MIBI and

  9. IDENTIFICACIÓN DE UNA NUEVA FASE EN LA ESTRUCTURA CRISTALINA DEL COMPUESTO CUATERNARIO Cu2ZnSnSe4 DURANTE LA ETAPA INCORPORACIÓN DEL ZnSe

    Directory of Open Access Journals (Sweden)

    Anderon Dussán Cuenca

    Full Text Available En este trabajo se presenta un estudio de las propiedades estructurales de películas delgadas del compuesto Cu2ZnSnSe4 variando tanto la masa (M X como la temperatura del sustrato al cual fue evaporado (Ts el compuesto binario ZnSe. Todas las muestras fueron depositadas por el método de co-evaporación en tres etapas y manteniendo constante los demás parámetros. A partir de las medidas de difracción de Rayos x fue posible establecer con el incremento de la Ts la presencia de fases binarias asociadas al compuesto cuaternario durante el proceso de crecimiento del material. Se encontró que alrededor del pico principal, 2θ = 27,1°, predominan las fases binarias y la presencia del ZnSe que se forma durante la subsecuente etapa de selenización del material. Una especie de bifurcación en el pico principal (2θ = 27,1° fue observado para la transición entre M ZnSe = 0,153 g a 0,171 g. Medidas de difracción de rayos x fueron realizadas al compuesto binarios puro, observándose una correspondencia con los picos encontrados alrededor del pico principal del compuesto. Un estudio a través de espectroscopia Raman evidenció corrimientos raman asociados a los compuestos binarios observados por XRD. A partir de la ecuación de Scherrer se encontró que los tamaños de los cristalitos variaban entre 80 y 90 nm.

  10. Adsorption behavior of 99Tc in Ca-bentonite

    International Nuclear Information System (INIS)

    Liu Dejun; Fan Xianhua; Zhang Yingjie; Yao Jun; Zhou Duo; Wang Yong

    2004-01-01

    The adsorption behaviors of 99 Tc in bentonite were studied with batch methods under aerobic and anoxic conditions. The adsorption ratios is about 1.47 mL/g under aerobic conditions. The adsorption ratio of 99 Tc in bentonite is not affected by pH in the range of 5-12 and the CO 3 2- , Fe 3+ concentrations in the range of 10 -8 -10 -2 mol/L in the solution. The adsorption ratio of Tc in bentonite increases with the increase of the mass percent of Fe 2 O 3 and Fe 3 O 4 and the Fe 2+ concentration in the range of 10 -8 -10 -2 mol/L. Tc exists ainly in the form of Tc(VII) after the adsorption equilibriums. The adsorption ratio of Tc in bentonite increase with the increase of the mass percent of Fe and Tc exists mainly in the form of Tc(VII) after the adsorption equilibriums. The adsorption ratio of Tc in bentonite is about 84.84 mL/g under anoxic conditions. The adsorption ratios of 99 Tc in bentonite decreases with the increase of pH in the range of 5-12 and the CO 3 2- concentration in the range of 10 -8 -10 -2 mol/L in the solution. The adsorption ratio of Tc in bentonite increases with the increase of the Fe 3+ , Fe 2+ concentration in the range of 10 -8 -10 -2 mol/L and the mass percent of Fe, Fe 2 O 3 and Fe 3 O 4 . Tc exists mainly in the form of Tc(IV) after the adsorption equilibriums. The adsorption isotherms of TcO 4 - in bentonite are all in fairly agree with the Freundlich's equation under aerobic and anoxic conditions. (authors)

  11. Response of the mouse fetus to radiation from Na/sup 99m/TcO4

    International Nuclear Information System (INIS)

    Lathrop, K.A.; Gloria, I.V.; Harper, P.V.

    1975-01-01

    The element technetium has recently assumed ecological importance as a source of low-level radiation, with the use of /sup 99m/Tc in nuclear medicine and production of /sup 99m/Tc during generation of electricity by nuclear reaction. When technetium is introduced as pertechnetate into the blood stream of pregnant females, it is transported across the placental barrier to the fetus, where a portion appears to be incorporated into biomolecules. When combined as biomolecules, radionuclides that decay by electron capture or isomeric transition show a lethality greater than that predicted in cell cultures and radiation therapy. The decay of /sup 99m/Tc by isomeric transition, together with the other considerations, places a high priority on the investigation of its radiation effects due to clinical doses of up to 25 mCi. Female mice were given daily i.v. injections of 0, 5, 50, and 500 μ Ci of /sup 99m/Tc as pertechnetate in isotonic saline throughout gestation, gestation and lactation, or lactation. At two months of age, the progeny were mated with randomly selected litter mates to produce a second generation; the process was repeated with their progeny for production of the third generation.Preliminary results reinforce the existing concern about use of /sup 99m/Tc-pertechnetate in pregnant or potentially pregnant subjects

  12. Superplastic Deformation of TC6 Alloy

    Directory of Open Access Journals (Sweden)

    DING Ling

    2016-12-01

    Full Text Available The superplastic tensile tests of TC6 alloy were conducted in the temperature range of 800-900℃ by using the maximum m value superplasticity deformation (Max m SPD method and the constant strain rate deformation method at the strain rate range of 0.0001-0.1 s-1. The stress-strain curve of the tensile tests was obtained and the microstructure near the fracture were analyzed by metallographic microscope. The result shows that the superplasticity of TC6 alloy is excellent, and the elongation increases first and then decreases with the increase of strain rate or temperature. When the temperature is 850℃ and strain rate is 0.001 s-1 at constant stain rate tensile tests, the elongation reaches up to 993%. However, the elongation using Max m SPD method at 850℃ is 1353%. It is shown that the material can achieve better superplasticity by using Max m SPD tensile compared to constant stain rate tensile under the same temperature. The superplastic deformation of TC6 alloy can enhance the dynamic recrystallization behavior significantly, the dynamic recrystallization behavior is promoted when strain rate and temperature are increased.

  13. 99mTc-diethyl-IDA chloescintigraphy

    International Nuclear Information System (INIS)

    Kim, J. W.; Oh, K. C.; Bae, B. H.; Kim, Y. S.; Park, B. H.

    1981-01-01

    For many years, 131 I-rose bengal has been used as the main hepatobiliary radiopharmaceutical. The undesirable physical characteristics of the radioiodine, however, finally prevented its widespread use in clinical medicine. In recent years, a number of hepatobiliary radiopharmaceuticals employing 99m Tc and 123 I as indicator have been introduced. 99m Tc-diethyl-IDA is a most promising one in these agents. Cholescintigraphy, using 99m Tc-diethyl-IDA was performed in 10 normal subjects and 32 patients suffering from various hepatobiliary disturbances, from Sep. -'79 to Aug-' 80, at the department of radiology, Maryknoll Hospital. The following results are obtained: 1. In normal fasting subjects, the liver, GB, CBD, and the proximal portion of small bowel are clearly delineated within 30 min after the injection. After a fatty meal, the radioactivity of the liver and CBD is notably disappeared with increase of the activity in GB and small bowel. 2. A dilatation of the main biliary ducts is a pathognomomic sign of partial mechanical obstructive disorders and a key point of D.Dx from hepatocellular disorders. 3. In cases of complete biliary obstruction, the radioactivity of the liver, CBD, and small bowel is not separated and the background activity is markedly increased. The kidneys are well visualized. 4. In severe hyperbilirubinaemia of above 10mg%, this method is not valuable

  14. Mechanisms of conventional and high Tc superconductivity

    International Nuclear Information System (INIS)

    Kresin, V.L.; Morawitz, H.; Wolf, S.A.

    1993-01-01

    This book gives a careful and objective review of theories of superconductivity in traditional superconductors, organics, and high Tc cuprates. Of course, the authors do still present their own theories of cuprate superconductivity, but only in the final chapter after other possibilities have been discussed. The book should be especially useful for researchers entering the field of high Tc superconductivity. The reviews of photon mediated pairing and strong coupling theory are very welcome, since much of this material has not been reviewed since the classic 1969 volume edited by Parks. In particular the authors dispel the various myths that phonon mediated pairing leads to upper bounds on Tc. In addition to phonon mediated pairing the book discussed in detail pairing due to exchange of acoustic (demon) plasmons, excitons, or magnetic fluctuations. There have been so many diverse mechanisms based on strong correlation and large U Hubbard models that a book like this can only discuss a limited selection of the main contenders. In particular here the emphasis on Fermi liquid based models no doubt reflects the authors' own point of view. A whole chapter discusses the concepts of induced superconductivity, in the proximity effect, and its application to materials with several different electronic subsystems

  15. Correlación entre la microestructura y el comportamiento plástico a alta temperatura de compuestos TZP-Ni (40% vol.

    Directory of Open Access Journals (Sweden)

    Morales-Rodríguez, A.

    2005-10-01

    Full Text Available Microstructure and high-temperature mechanical behaviour of TZP-Ni composites with 40 vol.% of nickel above the percolation threshold (placed in 34 vol.% in these wet‑processed ceramic-metal composites has been studied. The microstructure has been characterized using scanning electron microscopy. The composite plasticity has been studied by means of uniaxial compressive creep tests under constant load in argon atmosphere carried out in the temperature range between 900 and 1250 ºC and stresses between 9 and 144 MPa. TZP skeleton has been deformed in similar conditions to study nickel effect in global cermet behavior. The metallic phase has been removed from the cermets using chemical etching with HNO3. The plastic behavior of these materials is controlled by the ceramic matrix. The deformation rates are higher than monolithic TZP ones. This fact has been explained taking into account the metallic phase distribution into the matrix in these composites. Metal percolation provides materials with high ductility allowing the cermets to deform at temperatures as low as 900 ºC.

    Se ha estudiado la microestructura y el comportamiento mecánico a alta temperatura de compuestos de circona tetragonal (3Y-TZP con un 40% en volumen de níquel (referidos en adelante como TZP-Ni. El contenido en níquel está por encima del punto de percolación, que en estos compuestos cerámico-metal procesados en vía húmeda se sitúa en el 34% vol. de contenido metálico. La caracterización microestructural se ha realizado mediante observaciones de microscopía electrónica de barrido. La plasticidad de los compuestos se ha estudiado mediante ensayos de fluencia en compresión uniaxial a carga constante en atmósfera de argón realizados en el rango de temperaturas entre 900 y 1250 ºC y tensiones entre 9 y 144 MPa. Para estudiar el efecto del níquel en el comportamiento del cermet se ensayaron en condiciones similares esqueletos de TZP, obtenidos mediante la

  16. Evaluation of lung epithelial permeability in the volatile substance abuse using Tc-99m DTPA aerosol scintigraphy

    International Nuclear Information System (INIS)

    Cayir, D.; Demirel, K.; Korkmaz, M.; Koca, G.

    2011-01-01

    Chronic inhalant use is associated with significant toxic effects, including neurological, renal, hepatic, and pulmonary damage. However, there is a paucity of reports regarding respiratory complications in inhalant abusers. The aim of this study was to evaluate pulmonary epithelial permeability in the volatile substance abuse (VSA) using technetium-99m-labeled diethylenetriamine pentaacetic acid (Tc-99m DTPA) aerosol scintigraphy. This study included 18 patients with volatile substance abuse and 18 volunteer controls. All of patients and controls were smokers. Tc-99m DTPA aerosol scintigraphy was performed in all cases. Time-activity curves from each lung were generated and clearance half-time (T 1/2 ) of Tc-99m DTPA were calculated. T 1/2 of whole lung was calculated as a mean of the T 1/2 of left and right lung. The T 1/2 values of Tc-99m DTPA clearance in the substance abusers were significantly decreased as compared to the control group with respective mean values of 28.86±8.44, and 62.14±26.12 min (p=0.001). It was seen Tc-99m DTPA clearance from lung was faster as the duration of substance abuse was increased. Tc-99m DTPA pulmonary clearance is markedly accelerated in the volatile substance abuse. This suggests that inhalant abuse of substance may produce abnormalities in pulmonary alveolo-capillary membrane function. (author)

  17. Evaluation of lung epithelial permeability in the volatile substance abuse using Tc-99m DTPA aerosol scintigraphy.

    Science.gov (United States)

    Cayir, Derya; Demirel, Koray; Korkmaz, Meliha; Koca, Gokhan

    2011-10-01

    Chronic inhalant use is associated with significant toxic effects, including neurological, renal, hepatic, and pulmonary damage. However, there is a paucity of reports regarding respiratory complications in inhalant abusers. The aim of this study was to evaluate pulmonary epithelial permeability in the volatile substance abuse (VSA) using Tc-99m DTPA aerosol scintigraphy. This study included 18 patients with volatile substance abuse and 18 volunteer controls. All of patients and controls were smokers. Tc-99m DTPA aerosol scintigraphy was performed in all cases. Time-activity curves from each lung were generated and clearance half-time (T(1/2)) of Tc-99m DTPA were calculated. T(1/2) of whole lung was calculated as a mean of the T(1/2) of left and right lung. The T(1/2) values of Tc-99m DTPA clearance in the substance abusers were significantly decreased as compared to the control group with respective mean values of 28.86 ± 8.44, and 62.14 ± 26.12 min (p = 0.001). It was seen Tc-99m DTPA clearance from lung was faster as the duration of substance abuse was increased. Tc-99m DTPA pulmonary clearance is markedly accelerated in the volatile substance abuse. This suggests that inhalant abuse of substance may produce abnormalities in pulmonary alveolo-capillary membrane function.

  18. Estimadores compuestos en estadística regional: una aplicación a la estimación de la tasa de variación de la ocupación en la industria

    OpenAIRE

    Costa, Àlex; Satorra, Albert; Ventura, Eva

    2002-01-01

    Este trabajo es parte de un proyecto que estudia la aplicación de estimadores compuestos (combinación de estimadores directos e indirectos) para áreas pequeñas en estadística regional. Comparamos tres estimadores: uno directo basado en datos muestrales de cada Comunidad Autónoma (CA), otro sintético (indirecto) que combina los datos estatales con información específica de las CCAA, y un tercer estimador, el compuesto, basado en un modelo estadístico que se concreta en una combinación lineal d...

  19. Modelos animales y células derivadas para su uso en la determinación de compuestos útiles en el tratamiento de linfomas de células T

    OpenAIRE

    Bustelo, Xosé R.; Ruiz Macías, Sergio; Santos de Dios, Eugenio

    2008-01-01

    Modelos animales y células derivadas para su uso en la determinación de compuestos útiles en el tratamiento de linfomas de células T. La presente invención se encuadra dentro del campo de la biotecnología. Se refiere a un método para evaluar si un compuesto es efectivo en la prevención y/o tratamiento de una enfermedad asociada a linfomas de células T.

  20. Volatile Compounds in Honey Produced in the Central Valley of Ñuble Province, Chile Compuestos Volatiles en Miel Producida en el Valle Central de la Provincia de Ñuble, Chile

    Directory of Open Access Journals (Sweden)

    María Pía Gianelli Barra

    2010-03-01

    Full Text Available Headspace solid-phase microextraction (SPME with an 85 µm Carboxen polydimethylsiloxane (CAR/PDMS fiber was used to extract volatile compounds, and a gas chromatograph equipped with a mass spectometry detector (GC-MS was used to identify the volatile compounds in honeys. Thirty-four different volatile compounds from the headspace of honey produced in the central valley of Ñuble Province, Chile, were extracted with fiber coating CAR/PDMS. The identified compounds were: 10 alcohols, 9 acids, 6 ketones, 3 aldehydes, 2 furans, 2 terpenes and 2 lactones. Only four of the volatile compounds had never been reported before as honey compounds; these being: 1,3-propanodiol, 2-methyl butanoic acid, 3,4-dimethyl-3-hexen-2-one, and 6-methyl-5-octen-2-one. These four compounds were found in three of the 10 analyzed samples. The compounds found in the highest percentage of area were ethanol, acetic acid, 1-hydroxy-2-propane, 3-hydroxy-2-butane, and furfural. However, the analyzed samples did not present a distinctive profile.La extracción de compuestos volátiles desde el espacio de cabeza de mieles se realiza mediante microextracción en fase sólida (SPME, utilizando una fibra de 85 µm de Carboxen polidimetilsiloxano (CAR/PDMS, el análisis de los compuestos volátiles se realiza mediante cromatografía de gases con detector de masa (GC-MS. Un total de 34 diferentes compuestos volátiles fueron extraídos desde el espacio de cabeza de mieles provenientes del valle central de la provincia de Ñuble con la fibra de CAR/PDMS. Los compuestos identificados fueron 10 alcoholes, 9 ácidos, 6 cetonas, 3 aldehídos, 2 furanos, 2 terpenos y 2 lactonas. De los compuestos volátiles sólo tres no han sido reportados con anterioridad en mieles, estos compuestos fueron: 1,3-propanodiol, ácido 2-metil butanoico, 3,4-dimetil-3-hexen-2-ona, 6-metil-5-octen-2-ona. Estos cuatro compuestos se encontraron en sólo tres de las 10 muestras analizadas. Los compuestos que se

  1. Un modelo econométrico de medición de las relaciones de sustitución entre materias primas compradas para la producción de piensos compuestos y su asignación

    OpenAIRE

    Peeters, Ludo; Surry, Yves

    1993-01-01

    El objeto de este artículo es presentar un modelo econométrico para estimar las relaciones de sustitución entre las materias primas compradas para la producción de piensos compuestos y su asignación entre los diferentes tipos de piensos para diferentes tipos de ganado utilizando una función dual de costes. Dicho modelo se aplica a las industrias belga y neerlandesa de piensos compuestos. El modelo empírico utiliza una función de costes Simétrica Generalizada de McFadden de outputs múltiples q...

  2. Biodisponibilidad de diferentes compuestos de hierro añadidos a un néctar de frutas funcional. Interacción con las vitaminas y Fructo-oligosacáridos

    OpenAIRE

    Haro Vicente, Juan Francisco

    2006-01-01

    El enriquecimiento de los alimentos con hierro es considerado una de las estrategias más eficaces en la prevención de la deficiencia en hierro. El éxito del enriquecimiento de los alimentos depende tanto del tipo de alimento como del compuesto de hierro seleccionado. En nuestro estudio se seleccionó un néctar de frutas y varios compuestos de hierro: Pirofosfato férrico micronizado (PFM), Bisglicinato ferroso (BF) y Sulfato ferroso (SF), éste último como referencia, junto con las vitaminas C, ...

  3. Determinación de la capacidad antioxidante y compuestos fenólicos de cereales andinos: quinua (Chenopodium quinoa), kañiwa (Chenopodium pallidicaule) y kiwicha (Amaranthus caudatus)

    OpenAIRE

    Repo de Carrasco, Ritva; Encina Zelada, Christian Rene

    2008-01-01

    Se realizó la extracción de compuestos hidrofílicos y lipofílicos de cereales andinos, siendo el de mayor contenido en ambos casos la muestra de kañiwa (Chenopodium pallidicaule variedad cupi), siguiendo la de quinua (Chenopodium quinoa ecotipo marrón) y finalmente la kiwicha (Amaranthus caudatus ecotipo negra). Se realizó la determinación del contenido de compuestos fenólicos en quince variedades de quinua, siendo la de mayor contenido la variedad PIQ031046 con 139,94 mg ácido gálico/100 g; ...

  4. Pretreatment of Tc-Containing Waste and Its Effect on Tc-99 Leaching From Grouts

    International Nuclear Information System (INIS)

    Aloy, Albert; Kovarskaya, Elena N.; Harbour, John R.; Langton, Christine A.; Holtzscheiter, E. William

    2007-01-01

    A salt solution (doped with Tc-99), that simulates the salt waste stream to be processed at the Saltstone Production Facility, was immobilized in grout waste forms with and without (1) ground granulated blast furnace slag and (2) pretreatment with iron salts. The degree of immobilization of Tc-99 was measured through monolithic and crushed grout leaching tests. Although Fe (+2) was shown to be effective in reducing Tc-99 to the +4 state, the strong reducing nature of the blast furnace slag present in the grout formulation dominated the reduction of Tc-99 in the cured grouts. An effective diffusion coefficient of 4.75 x 10 -12 (Leach Index of 11.4) was measured using the ANSI/ANS-16.1 protocol. The leaching results show that, even in the presence of a concentrated salt solution, blast furnace slag can effectively reduce pertechnetate to the immobile +4 oxidation state. The measured diffusivity was introduced into a flow and transport model (PORFLOW) to calculate the release of Tc-99 from a Saltstone Vault as a function of hydraulic conductivity of the matrix. (authors)

  5. Tumor affinity of technetium-99m labeled radiopharmaceuticals. II. Sup(99m)Tc-Sn-diphosphonate (sup(99m)Tc-EHDP), sup(99m)Tc-Sn-dimercaptosuccinic acid (sup(99m)Tc-DMSA), sup(99m)Tc-Sn-diethyl stilbestrol diphosphate (sup(99m)Tc-DSDP)

    Energy Technology Data Exchange (ETDEWEB)

    Itoh, K; Kobayashi, S; Hisada, K; Tonami, N [Kanazawa Univ. (Japan). School of Medicine; Ando, A

    1976-10-01

    The authors have examined the tumor affinity of various sup(99m)Tc-labelled radiopharmaceuticals to Ehrlich's tumor for the purpose of delineating human malignant neoplasm positively. The biologic distributions of sup(99m)Tc-Sn-diphosphonate (sup(99m)Tc-EHDP), sup(99m)Tc-Sn-dimercaptosuccinic acid (sup(99m)Tc-DMSA) and sup(99m)Tc-Sn-diethyl stilbestrol diphosphate (sup(99m)Tc-DSDP, sup(99m)Tc-Honvan) are included as the second report on the tumor affinity of Ehrlich-bearing mice. Tumor concentration of sup(99m)Tc-EHDP was lowest and the positive delineation of implanted tumor with sup(99m)Tc-EHDP was poorest in sequential images, though active accumulation in some soft tissues malignant neoplasms, breast cancer, and thyroid cancer, has been reported. Tumor concentration and the tumor-to-blood ratio of sup(99m)Tc-DMSA were not so high, contrary to our expectation that /sup 197/Hg-DMSA might show high tumor concentration and high tumor-to-blood ratio the same as /sup 197/Hg chlormerodrin of the renal scanning radiopharmaceuticals. Tumor concentration of sup(99m)Tc-DSDP was highest. The tumor-to-blood concentration ratio was lower than that of the above mentioned radiopharmaceuticals but the tumor-to-liver ratio and/or tumor-to-lung ratio was over 1.0 at the earlier time. Biologic distribution of sup(99m)Tc-DSDP was similar to that of /sup 32/P labeled DSDP. It is presumed that sup(99m)Tc is labeled at the phosphate ester of DSDP which is dephospholytated immediately by phospholylase in vivo following intravenous injection. Although it is not known precisely it may be assumed that the mechanism of accumulating sup(99m)Tc-DSDP in Ehrlich's tumor is related to the phospholylase activity in neoplasms.

  6. Biogeochemical Coupling of Fe and Tc Speciation in Subsurface Sediments: Implications to Long-Term Tc Immobilization

    International Nuclear Information System (INIS)

    Jim K. Fredrickson; C. I. Steefel; R. K. Kukkadapu; S. M. Heald

    2006-01-01

    The project has been focused on biochemical processes in subsurface sediments involving Fe that control the valence state, solubility, and effective mobility of 99Tc. Our goal has been to understand the Tc biogeochemistry as it may occur in suboxic and biostimulated subsurface environments. Two objectives have been pursued: (1) To determine the relative reaction rates of 99Tc(VII)O2(aq) with metal reducing bacteria and biogenic Fe(II); and to characterize the identity, structure, and molecular speciation of Tc(IV) products formed through reaction with both biotic and abiotic reductants. (2) To quantify the biogeochemical factors controlling the reaction rate of O2 with Tc(IV)O2?nH2O in sediment resulting from the direct enzymatic reduction of Tc(VII) by DIRB and/or the reaction of Tc(VII) with the various types of biogenic Fe(II) produced by DIRB

  7. Comparison of sup(99m)Tc-MDP to sup(99m)Tc-pertechnetate by computerized quantitative joint scintigraphy

    International Nuclear Information System (INIS)

    Rekonen, A.; Moettoenen, T.; Oka, M.

    1982-01-01

    99mTc-pertechnetate was compared to 99mTc-MDP in joint pairs with asymmetric arthritis. Markedly elevated joint activity ratios (inflamed/uninflamed joint) were measured in all the joint pairs studied. In the joints affected by reactive arthritis and without roentgenologic changes the mean joint activity was the same with both tracers. A very high activity ratio with 99mTc-MDP was found in septic arthritis. In rheumatoid arthritis the sensitivity of 99mTc-MDP as an indicator of active arthritis seemed to be better than that of 99mTc-pertechnetate. Even in joints without erosions in roentgenograms the joint activity ratios were markedly elevated with 99mTc-MDP. This suggests, that high activity in 99mTc-MDP scanning might be prognostic of erosive joint changes. In this work a profile curve was used for quantitation differences between joints

  8. Clinical evaluation of Tc-99m-mebrofenin and comparison with Tc-disofenin for radionuclide hepatobiliary imaging

    International Nuclear Information System (INIS)

    Klingensmith, W. III; Fritzberg, A.; Spitzer, V.

    1982-01-01

    The clinical comparison reported indicates that Tc-mebrofenin has a significantly lower level of renal excretion that Tc-disofenin at all bilirubin levels. At a total bilirubin level of 25 mg/dl the renal excretion of Tc-mebrofenin is still less than the renal excretion of Tc-disofenin in subjects with normal bilirubin levels. In addition, renal radioactivity in images was never seen in subjects with normal bilirubins while visualization of renal radioactivity is routine in normal subjects with Tc-disofenin. No significant differences were found in any other parameter including hepatocyte extraction efficiency, time of maximum hepatic radioactivity, and hepatic parenchymal washout. This study indicates that Tc-mebrofenin is equal to Tc-disofenin in its hepatobiliary characteristics and superior in its renal characteristics

  9. The new 99mTc myocardial perfusion imaging agents: 99mTc-sestamibi and 99mTc-teboroxime

    International Nuclear Information System (INIS)

    Berman, D.S.; Kiat, H.; Maddahi, J.

    1991-01-01

    The two new 99m (99mTc) labeled myocardial perfusion agents, 99mTc-Sestamibi and 99mTc-Teboroxime, are now available for routine clinical application. Both agents allow assessment of ejection fraction by the first-pass technique at rest or during exercise, thus providing additional information not available with thallium-201. 99mTc-Sestamibi has long myocardial residence time, as well as adequate myocardial extraction, providing images of higher count density and superior quality compared with thallium-201. 99mTc-Teboroxime has excellent myocardial uptake characteristics but is cleared very rapidly from the myocardium. Both tracers have shown results similar to those obtained with thallium-201 for detection of coronary artery disease and the assessment of defect reversibility. 99mTc-Sestamibi studies using the rest/stress imaging sequence can be accomplished in approximately 5 hours; studies using dual-isotope imaging (rest thallium-201 and stress 99mTc-Sestamibi injection) can be completed in 1 to 2 hours. Gated stress images can be performed with 99mTc-Sestamibi, providing simultaneous information of myocardial perfusion at stress and resting wall motion or thickening and allowing rapid differentiation of ischemic from infarcted tissue. Because of its slow myocardial clearance and absence of redistribution, 99mTc-Sestamibi allows uncoupling of the time of injection from the time of imaging and thus can be valuable in the evaluation of acute myocardial infarction and outcome of thrombolytic therapy. With 99mTc-Teboroxime, rapid serial studies are feasible. Pharmacologic stress and rest studies with 99mTc-Teboroxime single photon emission computed tomography potentially can be completed in under 30 minutes. 73 references

  10. Evaluation of '99Mo presence in eluates of 99mTc used in nuclear medicine

    International Nuclear Information System (INIS)

    Ribeiro, Bianca da Silva

    2010-01-01

    Tc-99m is used for diagnostic imaging in nuclear medicine through SPECT technique. It is obtained by the elution of 99 Mo/ 99m Tc generators. During the elution process 99 Mo can be extracted becoming a radionuclidic impurity. One of the quality parameters of the eluate is the radionuclidic purity, MBT (molybdenum break through), defined as the ratio between 99 Mo and 99m Tc activities in the eluate. The North-American and European pharmacopoeias restrict the 99 Mo content, respectively, in 0.015 e 0.1% and, according to the International Atomic Energy Agency (IAEA), the activity ratio at the moment of administration of the radiopharmaceutical to the patient, should not exceed 0.015%. In Brazil, the control of such parameter is not obliged in official regulations. Thus, the objective of this work is to evaluate the occurrence of 99 Mo in 99m Tc eluates. It was initially optimized a methodology to determine the activity of 99 Mo in eluate samples. Efficiency curves were obtained for a NaI (Tl) 8'' x 4'' scintillation detector installed at the In Vivo Monitoring Laboratory (LABMIV-IRD). The methodology has been validated through the measurement of a 99 Mo standard liquid source calibrated at the National Metrology Laboratory for Ionizing Radiation (LNMRI-IRD). The samples analyzed in this work were gently supplied by 5 Nuclear Medicine Clinics located in the city of Rio de Janeiro. The activities of 99 mTc and 99 Mo in those samples have been measured respectively at the clinics and at the LABMIV. By applying a standardized methodology, the ration between the activities were calculated. The results show that 147 out of 174 samples presented 99 Mo activities above the minimum detectable activity of the technique. On the other hand, only 2 out of 147 samples surpassed the MBT limit suggested by the IAEA and have been detected in samples eluted from generators of 750 mCi. In one of the samples, eluted from a generator of 1000 mCi, the calculated MBT value was very close

  11. Preparation of i.v. 99mTc radiopharmaceuticals from spent moly 99Mo

    International Nuclear Information System (INIS)

    Noronha, O.P.D.

    1998-01-01

    Full text: Expiry dating is an important quality assurance precept in (radio) pharmacy. There are occasions when for the sake of patient service one may be forced to continue using an over aged source of 99 Mo to generate 99m Tc beyond 7d, especially when there is short/no supply of 99 Mo, (In the early days the expiry date was 3 d or 3 extractions, whichever one was earlier). With the passage of time a few physico-chemical changes (apart from decay) do occur in the 99 Mo/ 99m Tc milieu. The cocktail also begins to contain traces of carried over MEK which is subjected to strong β-, γ irradiation. These impurity (in trace amounts) is soluble in MEK and even, to an extent, in aqueous media. Furthermore, the concentrated impurity tends to seemingly increase in the bulk 99m TcO 4 - since one is compelled to leach TcO 4 - in lower volume of saline. On many occasions we have been constrained to extend the use of 99 Mo beyond 7 - 14 d. Adequate activities were obtained by pooling the previous week's lot of 99 Mo with the current over aged lot. On a few occasions over the past 26 years we have used 99 Mo much beyond 14 d and 2 - 3 occasions for 26 - 28 d (i.e. >10 t 1 /2 of 99 Mo). On each of these occasions the purity of 99m TcO- 4 was ascertained by pharmacopoeial procedures. It was found that despite depleting activities, the purity was not compromised and the trace impurities, even if present, did not cause any interference. We have profitably utilised the bulk TcO- 4 to formulate a variety of i.v. dosage forms of 99m Tc radiodiagnostics. The following strategy was adopted for the patient services - the agents requiring larger activity levels/patients dose were made available in the earlier period, the other during the latter half. It is concluded that pure 99m TcO- 4 can be obtained over the entire useful life-period of 99 Mo, even > 10t l/2

  12. Evaluation of regenerative capacity after kidney ischemic/reperfustion injury using 99mTc-DMSA

    International Nuclear Information System (INIS)

    Kwak, W. J.; Kim, J. W.; Park, K. M.; Lee, S. W.; Ahn, B. C.; Lee, J. T.; Yoo, J. S.

    2007-01-01

    Acute renal failure can be caused by a reduced renal blood flow induced because of ischemic injury. The damaged kidney can be completely restored in structure and function. 99m Tc-DMSA binds to cortical tubules in kidney and its uptake has been suggested to indicate function of cortical mass. Herein, the generative capacity of kidney after bilateral or unilateral ischemia/reperfusion (I/R) injury was evaluated non-invasively by scintigraphic imaging. Three different animal models were used. One or both kidneys of mice were subjected ischemic for 30 min for unilateral or bilateral I/R model, respectively. In third model, one kidney was excised and the other kidney was subjected ischemic for 30 min to give nephrectomy model. At 1 hr, 1 d, 3 d, 1 w, 2 w, 3 w after reperfusion, 99m Tc-DMSA (27.7 MBq) was injected via tail vein. After 3 hr, the mice were scanned for 30 min with pinhole equipped gamma camera. The ratio of ROI counts of kidney to total counts was calculated. In unilateral I/R mouse, the 99m Tc-DMSA uptake of injured kidney was decreased continuously up to 3 w (13.9 to 7.7%), while uptake in normal kidney is slowly increased. In case of nephrectomy model, 99m Tc-DMSA uptake of injured kidney was rapidly restored within 1 w after I/R operation (8.5 to 30%). Bilateral model showed reduced 99m Tc-DMSA uptake at 1 d, but total uptake in both I/R kidney was also increase up to 30% after 1 w and the uptake was maintained up to 3 w. In unilateral model, the 99m Tc-DMSA uptake of injured kidney kept decreasing up to 3 w while normal kidney showed increased 99m Tc-DMSA uptake. The restoration of I/R kidney was not observed within 3 w. However, in case of animal models which have only I/R kidneys such as bilateral and nephrectomy models, the 99m Tc-DMSA uptake was restored within 1 w and the excised kidney size was also normal in contrast to much smaller I/R kidney of unilateral model

  13. Internal friction around Tc connected with superconductivity in high Tc superconductors

    International Nuclear Information System (INIS)

    Wang Yening

    1993-01-01

    Internal friction and ultrasonic measurements show that there always exists a phase-like transition (PLT) characterized by the jump of lattice parameters at tens degrees above Tc in superconducting YBaCuO, BiSrCaCuO and TlBaCaCuO. Ferroelastic loops and shape memory effect associated with elastic softening invariably occur at the PLT temperature, showing the characteristics of thermoelastic martensitic transition. Internal frictions in KHz of Bi(Pb)SrCaCuO reveal a static hysteretic plateau (Qp -1 ) above Tc that drops linearly with temperature below Tc. The Qp -1 of YBaCuO decreases with decreasing oxygen content. The origin of the hysteretic Qp -1 is attributed to the lattice distortions around the carriers. (orig.)

  14. Bioavailability of {sup 99m}Tc-paclitaxel-glucuronide ({sup 99m}Tc-PAC-G)

    Energy Technology Data Exchange (ETDEWEB)

    Biber Muftuler, F.Z.; Demir, I.; Uenack, P.; Ichedef, C.; Yurt Kilcar, A. [Ege Univ., Izmir (Turkey). Dept. of Nuclear Applications

    2011-07-01

    An antitumor agent paclitaxel (PAC) has been proved to be efficient in the treatment of breast and ovarian cancer. Glucuronic acid-derived paclitaxel compound (paclitaxel-glucuronide (PAC-G)) was enzymatically synthesized using microsome preparate separated from rat livers. The biodistribution mechanism of PAC-G in healthy female Albino Wistar rats has been investigated. The expected structure is confirmed according to LC/MS results, and the possible attachment is to C2-hydroxyl group. PAC-G was labeled with {sup 99m}Tc and the radiochemical yield of radiolabeled compound ({sup 99m}Tc-PAC-G) was 98.0 {+-} 02.74% (n=9). The range of the breast/blood and breast/muscle ratios is approximately between 3 and 35 in 240 min. All these experimental studies indicate that {sup 99m}Tc-PAC-G may potentially be used in breast tissue as an imaging agent. (orig.)

  15. The formation of insoluble Tc depends on bacterial activity

    International Nuclear Information System (INIS)

    Ishii, Nobuyoshi; Uchida, Shigeo; Koiso, Hiroyuki

    2005-01-01

    The formation of insoluble Tc (>0.2 μm in size) in ponding water of paddy soil was investigated. The ponding water prepared by flooding with deionized water was collected at a one-week intervals during the 120 days of the experimental period. The collected sample was incubated with 3 kBq mL -1 TcO 4 - at 25degC for 14 days. The mean value of relative amounts of insolubilized Tc was less than 0.6% of total Tc. This result suggested that flooding with deionized water was not effective for the formation of insoluble Tc. When the ponding water sample was incubated with TcO 4 - under anaerobic conditions, Tc was scarcely insolubilized. On the other hand, a significant fraction of the Tc was insolubilized in the ponding water sample supplemented with nutrients that promote bacterial activity. Also, the amount of insoluble Tc increased with time. From these results, it was concluded that the formation of insoluble Tc in the ponding water depends on enhanced bacterial activity rather than just anaerobic conditions. (author)

  16. Exafs studies of coprecipitation and adsorption reactions of Tc

    Energy Technology Data Exchange (ETDEWEB)

    Bunker, D.J.; Jones, M.J.; Livens, F.R.; Collison, D. [Manchester Univ. (United Kingdom). Dept. of Chemistry; Pattrick, R.A.D. [Manchester Univ., Dept. of Earth Sciences (United Kingdom); Charnock, J.M. [CLRC Daresbury Laboratoire, Warrington Cheshire (United Kingdom)

    2000-07-01

    Adsorption and coprecipitation reactions may be a simple way of removing [TcO{sub 4}]{sup -} from aqueous solution. The effectiveness of a range of potential adsorbents and precipitants has been evaluated and some are capable of near quantitative (>98%) removal of [TcO{sub 4}){sup -} from solution. X-ray absorption near edge structure (XANES) has been used to determine Tc oxidation states and extended X-ray absorption fine structure spectroscopy (EXAFS) has been used to identify the local environment of Tc. The absorption edge position has been determined, using [PPh{sub 4}][TcO{sub 4}], TcS{sub 2} and Tc{sub 2}S{sub 7} as model compounds, and is diagnostic of Tc oxidation state. In a series of experiments investigating FeS coprecipitation, Tc was reduced to oxidation state (IV) and its local environment resembled that in TcO{sub 2} (6 O atoms at approximately 2.0 Angstrom). (authors)

  17. Biogas generation in anaerobic wastewater treatment under tetracycline antibiotic pressure

    Science.gov (United States)

    Lu, Meiqing; Niu, Xiaojun; Liu, Wei; Zhang, Jun; Wang, Jie; Yang, Jia; Wang, Wenqi; Yang, Zhiquan

    2016-01-01

    The effect of tetracycline (TC) antibiotic on biogas generation in anaerobic wastewater treatment was studied. A lab-scale Anaerobic Baffled Reactor (ABR) with three compartments was used. The reactor was operated with synthetic wastewater in the absence of TC and in the presence of 250 μg/L TC for 90 days, respectively. The removal rate of TC, volatile fatty acids (VFAs), biogas compositions (hydrogen (H2), methane (CH4), carbon dioxide (CO2)), and total biogas production in each compartment were monitored in the two operational conditions. Results showed that the removal rate of TC was 14.97–67.97% in the reactor. The presence of TC had a large negative effect on CH4 and CO2 generation, but appeared to have a positive effect on H2 production and VFAs accumulation. This response indicated that the methanogenesis process was sensitive to TC presence, but the acidogenesis process was insensitive. This suggested that the presence of TC had less influence on the degradation of organic matter but had a strong influence on biogas generation. Additionally, the decrease of CH4 and CO2 generation and the increase of H2 and VFAs accumulation suggest a promising strategy to help alleviate global warming and improve resource recovery in an environmentally friendly approach. PMID:27341657

  18. Studies of the Tc oxidation states in humic acid solutions

    International Nuclear Information System (INIS)

    Wang Bo; Liu Dejun; Yao Jun

    2010-01-01

    The oxidation state is an important aspect of the speciation of Tc in groundwater that contained organic substances due to it control the precipitation, complexation, sorption and colloid formation behavior of the Tc under HWL geological disposal conditions. In present work, the oxidation states of Tc were investigated using the LaCl 3 coagulation method and solution extraction method in aqueous solutions in which the humic acid concentration range is from 0 to 20 mg L -1 and the Tc (Ⅶ) concentration range is about 10 -8 mol l -1 . The radiocounting of 99 Tc was determined using liquid scintillation spectrometry. The humic acid will influence the radiocounting ratio of 99 Tc apparently, however, the quenching effect can be restrained once keep the volume of the cocktail to about twenty times of the sample volume. The LaCl 3 coagulation methods were carried out for the investigation of Tc oxidation states in humic acid aqueous systems at about pH 8. The tetraphenylarsonium chloride (IPA)-chloroform extraction method was used also simultaneously to investigation the concentrations of Tc (Ⅳ) and Tc (Ⅶ) for the availability of the LaCl 3 precipitation method, and the experimental results demonstrate that tetravalent technetium and pertechnetate concentrations are well agreement with the LaCl 3 precipitation method. These two experimental results demonstrated that Tc (Ⅶ) is very stable in the Tc (Ⅶ)-humic acid system during a 350 days experimental period, and the Tc (Ⅳ) concentrations are very lower, that is indicate that there didn't oxidizing reactions between the Fluka humic acid and Tc (Ⅶ) in aqueous solutions under anaerobic conditions. That is means the presence of humic acids even in anaerobic groundwater is disadvantage for the retardance of radionuclides. (authors)

  19. Studies of Tc oxidation states in humic acid solutions

    International Nuclear Information System (INIS)

    Wang Bo; Liu Dejun; Yao Jun

    2011-01-01

    The oxidation state of Tc is an important aspect of the speciation in groundwater which contained organic substances due to it control the precipitation, complexation, sorption and colloid formation behavior of the Tc under HWL geological disposal conditions. In present work, the oxidation states of Tc were investigated using the LaCl 3 coagulation method and solution extraction method in aqueous solutions in which the humic acid concentration range is from 0 to 20 mg/L and the Tc (VII) concentration is about 10 -8 mol/L. The radiocounting of 99 Tc was determined using liquid scintillation spectrometry. The humic acid will influence the radiocounting ratio of 99 Tc apparently, however, the quenching effect can be restrained once keep the volume of the cocktail to about twenty times of the sample volume. The LaCl 3 coagulation method was carried out for the investigation of Tc oxidation states in humic acid aqueous systems at about pH 8. The tetraphenylarsonium chloride (TPA)-chloroform extraction method was used also simultaneously to investigation the concentrations of Tc (IV) and Tc (VII) for the availability of the LaCl 3 precipitation method, and the experimental results demonstrate that tetravalent technetium and pertechnetate concentration are well agreement with the LaCl 3 precipitation method. These two experimental results demonstrated that Tc (VII) is very stable in the Tc (VII)-humic acid system during a 350 days experimental period, and the Tc (IV) concentrations are very lower, that is indicate that there didn't oxidizing reactions between the Fluka humic acid and Tc (VII) in aqueous solutions under anaerobic conditions. That means the presence of humic acids even in anaerobic groundwater is disadvantage for the retardance of radionuclides. (authors)

  20. Exposure of employees engaged on the production and quality control of radiopharmaceuticals labelled with Tc-99m and I-131

    International Nuclear Information System (INIS)

    Trtic, T.; Jovanovic, M.; Vranjes, S.; Vucina, J.; Vuksanovic, Lj.

    1995-01-01

    In this paper, the analysis is presented, of exposure control of employees in the Laboratory for radioisotopes, of the Vinca Institute of nuclear sciences, engaged in the production and quality control of the Tc-99m generator and radiopharmaceuticals labelled with Tc-99m and I-131. Effective doses equivalent (mSv) was measured by personal thermoluminescent dosimeter in the Laboratory for radiation and environmental protection each month. We calculated effective dose equivalents for each year in the period 1986-1990. Thirty one employees were analysed. They were separated into the groups both on the basis of radioisotope which they worked with and the kind of the professional work. The highest average effective doses equivalent were received in the group producing of Tc-99m generator (4-12.5 mSv) and in the group producing I-131 radiopharmaceuticals (3.55-13.73 mSv). (author)

  1. Development of more efficacious Tc-99m organ imaging agents for use in nuclear medicine by analytical characterization of radiopharmaceutical mixtures. Progress report, May 1, 1982-April 30, 1983

    International Nuclear Information System (INIS)

    Heineman, W.R.; Deutsch, E.A.

    1982-11-01

    A procedure based on high performance liquid chromatography (HPLC) has been developed for separating individual Tc-diphosphonate complexes in skeletal-imaging radiopharmaceuticals prepared by reduction of TcO 4 - with NaBH 4 in the presence of methylene diphosphonate (MDP). Seven different Tc-MDP complexes have been detected and isolated in pure form. Significant differences in skeletal uptake and blood clearance are exhibited by the three complexes tested thus far by biodistribution studies in test animals. The relative quantities of these complexes present in a radiopharmaceutical preparation are dramatically influenced by the pH of the reaction mixture. Thus, control of pH is a simple means of forming in high yield the single, most efficacious Tc-MDP complex for skeletal imaginG. An HPLC method with electrochemical detection has been developed for the analytical determination of total TcO 4 - (/sup 99m/Tc + 99 Tc). Concentrations of TcO 4 - as low as 9 x 10 -9 M can be detected. The method is being evaluated for monitoring total TcO 4 - in 99 Mo//sup 99m/Tc generators

  2. Determination of 99Mo in 99mTc eluates used in nuclear medicine centers in Rio de Janeiro

    International Nuclear Information System (INIS)

    Ribeiro, Bianca da S.; Souza, Raphael S.S.; Lucena, Eder A.; Dantas, Ana Leticia A.; Dantas, Bernardo M.

    2009-01-01

    99m Tc is used in nuclear medicine for image diagnoses with SPECT. It is obtained from the elution of molybdenum-99/technetium-99m ( 99 Mo/ 99m Tc) generators. During the elution, 99 Mo can detach from the column, passing through the filter and mixing in the solution of pertechnetate eluate and becoming a radionuclidic impurity. The presence of molybdenum in the radiopharmaceutical solution imparts an unnecessary radiation dose to the patient, since its half-life is relatively long (66 hours) and it emits beta particles and high-energy photons of (740 keV). A parameter that indicates the quality of the eluates is the radionuclidic purity, the MBT (molybdenum break through), defined as the ratio between 99 Mo and 99m Tc activities in the eluate. The American and the European Pharmacopoeias restrict 99 Mo content to respectively 0.015% and 0.1% activity ratio 99 Mo/ 99m Tc at the time of the administration to the patient. In Brazil, this parameter is not controlled by official regulations. The objective of this work is to determine the presence of 99 Mo in the eluates used in nuclear medicine centers (NMC). The activity measurements of 99 Mo were performed with a NaI(Tl)8''x4'' scintillation detector installed in the IRD whole body counter. The activity of 99m Tc was measured in the NMC where the eluates were collected and, using the established calculations, it was determined the activity ratio 99 Mo/ 99m Tc. The eluate samples were kindly supplied by the participating NMC of Rio de Janeiro. All measurements indicated the presence of 99 Mo. It is concluded that the technique is sensitive to detect 99 Mo in 99m Tc eluates and permits to verify the quality of the generators used in NMC evaluated in this study. (author)

  3. Identification of novel mammalian hosts and Brazilian biome geographic distribution of Trypanosoma cruzi TcIII and TcIV.

    Science.gov (United States)

    Barros, Juliana Helena S; Xavier, Samanta Cristina C; Bilac, Daniele; Lima, Valdirene Santos; Dario, Maria Augusta; Jansen, Ana Maria

    2017-08-01

    Trypanosoma cruzi is a parasitic protozoan responsible for Chagas disease. Seven different Discrete Typing Units (DTUs) of T. cruzi are currently identified in nature: TcI-TcVI, and TcBat whose distribution patterns in nature, hosts/reservoirs and eco-epidemiological importance are still little known. Here, we present novel data on the geographic distribution and diversity of mammalian hosts and vectors of T. cruzi DTUs TcIII and TcIV. In this study, we analyzed 61 T. cruzi isolates obtained from 18 species of mammals (five orders) and two Hemiptera genera. Samples were collected from five Brazilian biomes (Pantanal, Caatinga, Cerrado, Atlantic Rainforest, and Amazon) previously characterized as Z3 or mixed infection (TcI-Z3) by mini-exon gene PCR. To identify TcIII and TcIV genotypes, we applied restriction fragment length polymorphism analysis to the PCR-amplified histone 3 gene. DTUs TcIII and TcIV were identified in single and mixed infections from wide dispersion throughout five Brazilian biomes studied, with TcIV being the most common. Pantanal was the biome that displayed the largest number of samples characterized as TcIII and TcIV in single and mixed infections, followed by Atlantic Rainforest and Amazon. Species from the Didelphimorphia order displayed the highest frequency of infection and were found in all five biomes. We report, for the first time, the infection of a species of the Artiodactyla order by DTU TcIII. In addition, we describe new host species: five mammals (marsupials and rodents) and two genera of Hemiptera. Our data indicate that DTUs TcIII and TcIV are more widespread and infect a larger number of mammalian species than previously thought. In addition, they are transmitted in restricted foci and cycles, but in different microhabitats and areas with distinct ecological profiles. Finally, we show that DTUs TcIII and TcIV do not present any specific association with biomes or host species. Copyright © 2017. Published by Elsevier B.V.

  4. Separation of sup(99m)Tc from 99MoO3

    International Nuclear Information System (INIS)

    Tomicic, M.

    1977-07-01

    At the present time sup(99m)Tc is widely used in nuclear medicine and its uses are increasing. It can be produced by various methods, and of those most frequently used today two have special features making them particularly applicable to the large-scale production of instant sup(99m)Tc - these are solvent extraction with methyl-ethyl-ketone and the sublimation methods. This report presents a bibliographic review of these methods, their main perfomance parameters, and experience obtained from the development and operation of a sublimation generator. Separation of sup(99m)Tc from irradiated MoO 3 was carried out with high yields (75-95%) after multiple repetition of the separation process with molybdenum trioxide heated for half an hour at a maximum temperature of 850-890 deg C in an air flow. The activity ratio of molybdenum in the separated sup(99m)Tc was of the order of 4 x 10 -5 . (author)

  5. Studies of labelling conditions for gentamicin with99mTc Biological uptake

    International Nuclear Information System (INIS)

    Carvalho, O.G. de; Almeida, M.A.T.M. de; Muramoto, E.

    1989-10-01

    Gentamicin sulphate is an aminoglycoside antibiotic type specifically used for treatment of infections produced by Gram-negative bacterias but on the hand it presents ototoxic reactions as a serious side effect. The optimal labelling conditions of gentamicin sulphate with 99m Tc, using sodium pertechnetate solutions eluted from a 99 Mo - 99m Tc generator, were stablished by testing differents masses of antibiotic and reducing agent (SnCl 2 .2H 2 O), and also different reaction times and final labelling pH. The labelling yields were determined through ascendent type crimatographic analysis using metylacetone and 0,9% NaCl solution as solvents. From the studies of the biological uptake of 99m Tc gentamicin sulphate per gram of eight different organs and tissues from Wistar rats, it was shown that for a dose of 0,3 mg of 99m Tc-gentamicin intravenously administered. The kidneys, presented the greatest affinity for the drug, being thus the main excretory organs of the product. (author) [pt

  6. Diversification in the Supply Chain of (99)Mo Ensures a Future for (99m)Tc.

    Science.gov (United States)

    Cutler, Cathy S; Schwarz, Sally W

    2014-07-01

    The uncertain availability of (99m)Tc has become a concern for nuclear medicine departments across the globe. An issue for the United States is that currently it is dependent on a supply of (99m)Tc (from (99)Mo) that is derived solely by production outside the United States. Since the United States uses half the world's (99)Mo production, the U.S. (99)Mo supply chain would be greatly enhanced if a producer were located within the United States. The fragility of the old (99)Mo supply chain is being addressed as new facilities are constructed and new processes are developed to produce (99)Mo without highly enriched uranium. The conversion to low-enriched uranium is necessary to minimize the potential misuse of highly enriched uranium in the world for nonpeaceful means. New production facilities, new methods for the production of (99)Mo, and a new generator elution system for the supply of (99m)Tc are currently being pursued. The progress made in all these areas will be discussed, as they all highlight the need to embrace diversity to ensure that we have a robust and reliable supply of (99m)Tc in the future. © 2014 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

  7. Accumulation of 99Tc in duckweed Lemna minor L. as a function of growth rate and 99Tc concentration

    International Nuclear Information System (INIS)

    Hattink, J.; Wolterbeek, H.Th.

    2001-01-01

    This study focuses on the question of whether short-term studies can be used to forecast the accumulation of the long-lived fission product 99 Tc in duckweed, Lemna minor L., grown in the field; in other words, are the accumulation parameters independent of changing growth rates typical of natural populations of duckweed. Two processes determine the 99 Tc accumulation: (i) uptake and release of 99 TcO 4 - , characterised by a concentration factor, K d , and (ii) first-order reduction and complexation of Tc VII , characterised by k red . At various 99 Tc concentrations, the growth, total Tc and TcO 4 - accumulation were monitored over 10 days; parameters were fitted and compared with earlier results. Both K d and k red turn out to be independent of time, concentration and growth rate up to a concentration of 10 -6 mol l -1 99 TcO 4 - . Concentrations above this level result in toxic effects. The Tc accumulation in field populations of duckweed at Tc concentrations which generally occur in the environment can be forecasted by using the results from short-term experiments

  8. 99mTc-Tetrofosmin scintimammography in suspected breast cancer patients: comparison with 99mTc-MIBI

    International Nuclear Information System (INIS)

    Kim, Seong Jang; Kim, In Ju; Kim, Yong Ki; Bae, Young Tae

    2000-01-01

    The aim of this study was to investigate the diagnostic role of 99m Tc-Tetrofosmin in detection of breast cancer and compared with that of 99m Tc-MIBI. Forty-eight patients with a clinically palpable mass or abnormal mammographic or ultrasonographic findings had 99m Tc-MIBI and 99m Tc-Tetrofosmin scintimammographies after intravenous injection of 925 MBq of radiopharmaceuticals. The scintimammographs were correlated with histopathologic findings. Thirty-three patients were diagnosed with breast cancer and 15 patients with benign breast diseases. The numbers of true positive, true negative, false positive, and false negative cases of 99m Tc-MIBI scintimammography were 29, 10, 5, and 4 respectively. The sensitivity, specificity, positive predictive value, and negative predictive value of 99m Tc-MIBI scintimammographies were 87.8%, 66.7%, 85.3%, and 71.4% respectively. The numbers of true positive, true negative, false positive, and false negative cases of 99m Tc-Tetrofosmin were 31, 10, 5, and 2 respectively. The sensitivity, specificity, positive predictive value, negative predictive value of 99m Tc-Tetrofosmin were 93.9%, 66.7%, 86.1%, and 73.3% respectively. One patient was false negative in both 99m Tc-Tetrofosmin scintimammographies and its size was 0.5cm. 99m Tc-Tetrofosmin and 99m Tc-MIBI were non-invasive and useful in detection of breast cancer and 99m Tc-Tetrofosmin was comparable to the 99m Tc-MIBI in detection of primary breast cancer.=20

  9. Materiales compuestos C/SiC para aplicaciones estructurales de alta temperatura. Parte I: estabilidad termodinámica y química

    Directory of Open Access Journals (Sweden)

    Aparicio, M.

    2000-12-01

    Full Text Available The development of aero-engine and aircraft industry is aimed to hypersonic technology, efficiency enhancements and pollutant emission reductions. This objective can only be reached by increasing the operating temperatures, utilising new materials which mechanical properties are retained up to high temperatures. SiC matrix composites reinforced with carbon fibres (C/SiC are good examples with very good bending and thermal shock resistance at temperatures up to 1600ºC as well as low density. However, the fact which currently inhibits the application of these materials is the high oxidation rate of carbon fibres at temperatures above 450ºC. In the first part of the paper, a review of the most important properties and oxidation mechanisms of C and SiC has been carried out. The influence of each material disposition, individually and as composite, has been analysed.

    El desarrollo de la industria aeroespacial se orienta actualmente hacia la tecnología hipersónica, el incremento en el rendimiento de las reacciones de combustión y la reducción de la emisión de contaminantes. Estos objetivos sólo pueden alcanzarse aumentando la temperatura de combustión, para lo cual es necesario desarrollar nuevos materiales que conserven sus propiedades mecánicas hasta temperaturas muy elevadas. Entre ellos se encuentran los materiales compuestos de matriz de SiC reforzada con fibra continua de carbono (C/SiC, cuyas propiedades más importantes son una elevada resistencia a flexión y al choque térmico desde temperatura ambiente hasta 1600ºCy su reducido peso específico. Sin embargo, el principal problema que acompaña a los materiales compuestos C/SiC es la elevada velocidad de oxidación de la fibra de carbono a partir de 450ºC. En la primera parte del trabajo se realiza una revisión de las características más relevantes del carbono y SiC, y de su comportamiento frente a la oxidación, tanto por separado como formando parte de materiales

  10. Comportamiento en fluencia de un material compuesto de matriz metálica Al6061-15 vol % SiCw pulvimetalúrgico

    Directory of Open Access Journals (Sweden)

    González-Doncel, G.

    2005-12-01

    Full Text Available The creep behavior of a powder metallurgy (PM Al6061-15 vol % SiCw metal matrix composite has been studied. This behavior has been compared to that of 6061Al cast alloy and 6061Al PM alloy. The creep response of the PM unreinforced alloy is better than that of the cast 6061Al alloy. Similarly, the behavior of the composite is better than that of the PM unreinforced alloy. Two microstructural factors have been considered the responsible ones of this improvement. The first one is the dispersion of Al2O3 oxide particles of nanometric scale. The second one, is the presence of the SiC whisker reinforcement of micrometric scale. Despite the similar strengthening effect, the intrinsic nature of the reinforcing mechanism is, however, different for each type of particle due to the different microstructural scale.Se ha realizado un estudio de las propiedades en fluencia del material compuesto pulvimetalúrgico Al6061-15 vol % SiCw. Su comportamiento se ha comparado con el de la aleación Al6061 pulvimetalúrgica y la aleación Al6061 de colada. El comportamiento del material pulvimetalúrgico sin reforzar mejora respecto al del material de colada. Al mismo tiempo, el del material compuesto mejora respecto al comportamiento del material pulvimetalúrgico sin reforzar. Se consideran dos factores microestructurales como los principales responsables de la mejora de las propiedades en fluencia de este material compuesto. Por un lado, las partículas de Al2O3 de tamaño nanométrico y, por otro, las partículas de fibra corta cerámicas de SiC de tamaño micrométrico. Aunque ambos tipos de partículas dan lugar a un efecto de refuerzo similar, los mecanismos intrínsecos asociados a la presencia de estas partículas tienen una naturaleza diferente debido a la diferencia en la escala microestructural.

  11. Caracterización microestructural del compuesto intermetálico AI7Cu4Ni

    Directory of Open Access Journals (Sweden)

    Herrera, R.

    2004-04-01

    Full Text Available A study of the microstructural characterization of the intermetallic compound Al7Cu4Ni was carried out. The intermetallic compound was fabricated using the melting and casting process followed by a homogenization treatment at 750 °C for 240 h. The structural evolution during homogenizing was analyzed by X-ray diffraction. The microstructure of intermetallic compound was also characterized by scanning electron and transmission electron microscopies. Additionally, the microhomogeneity of this compound was studied by the Energy Dispersive and Wavelength Dispersive Spectroscopy. The results of this work showed that it was possible to obtain the intermetallic compound with the crystalline structure and at the composition reported in the literature. Besides, this compound showed a good chemical microhomogeneity, which makes it a possible candidate as a material reference for either microanalysis or hardness testing.

    Se llevó a cabo un estudio de caracterización microestmctural del compuesto intermetálico AI7Cu4Ni, que se fabricó por fusión y moldeo y un posterior recocido de homogeneización a 750 °C, durante 480 h. La evolución estructural durante el recocido de homogeneización se siguió por difracción de rayos X. La microestructura se caracterizó por microscopía electrónica de barrido y transmisión. Asimismo, se estudió la microhomogeneidad química del compuesto intermetálico, utilizando las técnicas de microanálisis de dispersión de energía y de longitud de onda de rayos X. Los resultados verificaron que es posible obtener el compuesto intermetálico AI7Cu4Ni con la estructura cristalina y en la composición reflejada en la literatura. Además, su buena microhomegeneidad química sugiere su posible aplicación como un material de referencia para la técnica de microanálisis o el ensayo de dureza.

  12. Síntesis de un compuesto de polimetacrilato de metilo con nanotubos de carbono de pared múltiple a escala de laboratorio

    Directory of Open Access Journals (Sweden)

    Yuly Méndez

    2009-05-01

    Full Text Available El objetivo del presente trabajo es la síntesis y caracterización térmica de un compuesto de polimetacrilato de metilo (PMMA con nanotubos de carbono de pared múltiple (MWNTs a escala de laboratorio. El compuesto de PMMA con MWNTs fue producido por polimerización in-situ en masa, usando como iniciador Peróxido de Benzoilo (BPO. Previamente a la polimerización, se realizó una reacción entre los MWNT y el BPO para propiciar la formación de radicales libres en la superficie de los MWNT. La concentración de MWNTs fue variada para producir muestras con 0%, 0,1% y 0,5% en peso de MWNT. El compuesto obtenido presenta una adecuada dispersión en la matríz polimérica y propiedades térmicas diferentes a la del PMMA blanco, lo que evidencia la transferencia de propiedades por parte de los MWNTs. El método propuesto es sencillo y de bajo costo, y puede ser usado en una gran variedad de aplicaciones industriales./The purpose of the current work was the lab-scale synthesis and thermal characterization of a Poly(methyl methacrylate-Multi-walled Carbon Nanotube (PMMA-MWNTs composite. The PMMA-MWNTs composite was produced by mass in-situ polymerization, using Benzoyl Peroxide (BPO as initiator. As a previous step to the polymerization, a BPO-MWNTs reaction was performed to trigger the formation of free radicals in the surface of the MWNTs. The MWNT concentration in the composite was varied to produce samples of 0%, 0.1% and 0.5% w/w of MWNTs in PMMA. The produced composites show an adequate dispersion and different thermal properties than the PMMA blank, suggesting a property transfer from the nanoparticles. The proposed production method is simple, of relatively low cost and easily applicable in a variety of industrial applications.

  13. A reliable method for the quality control of 99mTc-MIBI prepared using fractionated cardiolite kits

    International Nuclear Information System (INIS)

    Poot, M.T.; Varelis, P.

    1998-01-01

    Full text: The reconstitution of fractionated Cardiolite kits with Na[ 99m Tc]TcO 4 eluted from a wet-column generator results in a preparation that contains elevated amounts of a polar radiochemical impurity, which is normally present in only trace amounts when such kits are reconstituted with eluate from a dry-column generator. We demonstrate, using HPLC, that this impurity causes a positive bias in several reported quality control methods (TLC, ITLC and SPE) for 99m Tc-MIBI, including that recommended by the manufacturer (TLC). A rapid procedure, based on a C18 solid phase extraction (SPE) cartridge, for measuring the radiochemical purity (RCP) of 99m Tc-MIBI samples was developed and compared with three other methods including HPLC. Over a RCP range of 49-98%, the values obtained using our SPE method deviated from those obtained using HPLC by 1.1+1.395 (n=26). In conclusion our SPE method is a rapid and reliable means of quality controlling 99m Tc-MIBI

  14. A reliable method for the quality control of 99mTc-MIBI prepared using fractionated cardiolite kits

    Energy Technology Data Exchange (ETDEWEB)

    Poot, M.T.; Varelis, P. [St George Hospital, Sydney, NSW (Australia). Department of Nuclear Medicine

    1998-06-01

    Full text: The reconstitution of fractionated Cardiolite kits with Na[{sup 99m}Tc]TcO{sub 4} eluted from a wet-column generator results in a preparation that contains elevated amounts of a polar radiochemical impurity, which is normally present in only trace amounts when such kits are reconstituted with eluate from a dry-column generator. We demonstrate, using HPLC, that this impurity causes a positive bias in several reported quality control methods (TLC, ITLC and SPE) for {sup 99m}Tc-MIBI, including that recommended by the manufacturer (TLC). A rapid procedure, based on a C18 solid phase extraction (SPE) cartridge, for measuring the radiochemical purity (RCP) of {sup 99m}Tc-MIBI samples was developed and compared with three other methods including HPLC. Over a RCP range of 49-98%, the values obtained using our SPE method deviated from those obtained using HPLC by 1.1+1.395 (n=26). In conclusion our SPE method is a rapid and reliable means of quality controlling {sup 99m}Tc-MIBI

  15. Formation of a Tc(III)-adenosine diphosphate complex

    International Nuclear Information System (INIS)

    Torres, J.; Kremer, C.; Kremer, E.

    1995-01-01

    A 99 Tc-ADP complex was prepared when KTcO 4 was reduced in aqueous medium by SnCl 2 , Na 2 S 2 O 4 , NaBH 4 or Zn in the presence of ADP in excess. The resulting solution was studied by chromatography and spectrophotometry. Electrochemical reduction and substitution on [Tc III (tu) 6 ] 3+ were investigated as alternative synthetic routes. The anionic Tc-ADP complex was isolated as a solid. Cerimetric titrations confirmed the oxidation state +3 for the central atom. IR and 1 H-NMR data showed that the purine base is bonded to the Tc central atom but not the ribose moiety. No oxo groups seemed to be directly bonded to the Tc atom. The complex is rather stable in neutral solutions. However, it decomposes to pertechnetate and TcO 2 at extreme pH values. (author). 16 refs., 2 figs., 3 tabs

  16. Can tumor uptake Tc-99m MDP ?

    International Nuclear Information System (INIS)

    Yand Shun, Fang; Yao, Ming; Zeng, Jun; Shi Zhen, Yu; Zhao Lan, Xiang; Dong Qiang, Gang

    2003-01-01

    To explore the mechanism of technetium-99m-methylene diphosphonate (MDP) uptake within tumor through analyze a distribution of Tc-99m MDP in mice bearing tumor cell lines. Methods: The uptake of Tc-99m MDP was analyzed in seven human tumor cell lines ( SPC-A1 adenocarcinoma of lung cancer, Bcap-37 Breast cancer, T-24 Bladder cancer, SKOV3 Ovary carcinoma, Hela-229 Cervical carcinoma, SCI-OS Osteosarcoma, SCI-375 Melanoma) and mouse Lewis lung cancer cell line. They were transplanted into athymic mice, SCID nude mice and C57BL/6 mice, respectively. Approximately 10(6) cells of each cell line were injected subcutaneously into a right chest of mouse. After 4 and 5 weeks, the Tc-99m MDP scintigraphy were determined 6 hours after tail vein injection of 74MBq in 0.05ml every mouse. Result: Biodistribution and tumor uptake MDP was different in the various cell types investigated. According to the Region Ratio program of Siemens Power Macintosh 9500 Computer System, region of interests (RIOs) placed on a small part of the tumor and horizontal copied to left background (T/B) and thoracic spine (T/N) of mice in Tc-99m MDP imaging. The average cpm/pixel ratios were calculated by standardized uptake measure (SUM) and determined the tumor-positive value (T/B) greater than or equal to 1.2. T/B of cell lines were sorted from higher to lower as follows: SCI-OS, Lewis, SKOV3, SCI-375, T-24, SPC-A1, Bcap-37, Hela-229. T/N: SCI-OS, SKOV3, T-24, SCI-375, Lewis, SPC-A1, Bcap-37, Hela-229. The biodistribution data of 99Tcm-MDP in SPC-A1 tumor-bearing BALB/c nude mice were given as ID/g and represent the means D (n=13) in 30 hours after injection of Tc-99m MDP. ID/g of major tissue were sorted from higher to lower as follows: thoracic spine, lumbar, ribs, kidneys, the center of tumor, the ulcer of tumor, the surrounding of tumor, lymph node, blood, lungs, heart, liver. Conclusions: Most of tumor can uptake Tc-99m MDP including human adenocarcinoma. The uptake rate in the center tissue of

  17. 99mTc renal tubular function agents: Current status

    International Nuclear Information System (INIS)

    Eshima, D.; Fritzberg, A.R.; Taylor, A. Jr.

    1990-01-01

    Orthoiodohippuric (OIH) acid labeled with 131I is a widely used renal radiopharmaceutical agent and has been the standard radiopharmaceutical agent for the measurement of effective renal plasma flow (EPRF). Limitations to the routine clinical use of 131I OIH are related to the suboptimal imaging properties of the 131I radionuclide and its relatively high radiation dose. 123I has been substituted for 131I; however, its high cost and short shelf-life have limited its widespread use. Recent work has centered on the development of a new 99mTc renal tubular function agent, which would use the optimal radionuclidic properties and availability of 99mTc and combine the clinical information provided by OIH. The search for a suitable 99mTc renal tubular function agent has focused on the diamide dithiolate (N2S2), the paraaminohippuric iminodiacetic acid (PAHIDA), and the triamide mercaptide (N3S) donor ligand systems. To date, the most promising 99mTc tubular function agent is the N3S complex: 99mTc mercaptoacetyltriglycine (99mTc MAG3). Studies in animal models in diuresis, dehydration, acid or base imbalance, ischemia, and renal artery stenosis demonstrate that 99mTc MAG3 behaves similarly to 131I OIH. A simple kit formulation is available that yields the 99mTc MAG3 complex in high radiochemical purity. Studies in normal subjects and patients indicate that 99mTc MAG3 is an excellent 99mTc renal tubular agent, but its plasma clearance is only 50% to 60% that of OIH. In an effort to develop an improved 99mTc renal tubular function agent, changes have been made in the core N3S donor ligand system, but to date no agent has been synthesized that is clinically superior to 99mTc MAG3. 61 references

  18. To the radiotoxicity of {sup 99m}Tc radiopharmaceuticals

    Energy Technology Data Exchange (ETDEWEB)

    Ftacnikova, S [Inst. of Preventive and Clinical Medicine, 83301 Bratislava (Slovakia)

    1996-12-31

    In this paper the radiotoxicity and RBE values of Auger electrons for {sup 99m}Tc radiopharmaceuticals were discussed. Expression for the expected RBE for {sup 99m}Tc compounds is given. For the Auger electrons emitted in the decay of {sup 99m}Tc the RBE(Auger) = 10 and a value of 20 for the radiation weighing factor were recommended. (J.K.) 4 refs.

  19. Preoperative localization of parathyroid carcinoma using Tc-99m MIBI.

    Science.gov (United States)

    Kitapçi, M T; Tastekin, G; Turgut, M; Caner, B; Kars, A; Barista, I; Bekdik, C

    1993-03-01

    A patient with parathyroid cancer is presented who underwent Tc-99m MIBI scintigraphy. The Tc-99m MIBI image demonstrated increased accumulation of activity at the lower pole of the left thyroid lobe which was later confirmed as a parathyroid cancer. Uptake by parathyroid cancer must be kept in mind as a cause of increased Tc-99m MIBI accumulation when a disease is in question in the thyroid or parathyroid gland.

  20. Jointscintigraphy with 99m Tc-pyrophosphate

    International Nuclear Information System (INIS)

    Mirtl, B.; Leb, G.; Klein, G.; Goebel, R.; Eber, O.

    1975-01-01

    Joint scintigraphy was performed in 85 patients suffering from a variety of rheumatic diseases, using a gamma camera and line scanner. Tc-pyrophosphate was the radio nuclide employed; it accumulates selectively in the juxta-articular parts of the bone. The method provides an objective demonstration of inflammatory and degenerative rheumatic joint changes. More over scintigraphic changes can be demonstrated in joint disease which is too early to be clinically apparent or before there are any corresponding changes in serological parameters. The method is useful both in the localisation and staging of disease, in the evaluation of treatment and as an objective control of clinical skills. (orig.) [de

  1. A Meteorological Overview of the TC4 Mission

    Science.gov (United States)

    Pfister, L.; Selkirk, H. B.; Starr, D. O.; Rosenlof, K.; Newman, P. F.

    2010-01-01

    The TC4 mission in Central America during summer 2007 examined convective transport into the tropical Upper Troposphere/Lower Stratosphere (UTLS) and the evolution of cirrus clouds. The tropical tropopause layer (TTL) circulation is dominated by the Asian monsoon anticyclone and westward winds that stretch from the western Pacific into the Atlantic. During TC4, TTL westward flow over Central America was stronger than normal. Incidence of cold clouds over the Central American region was the third lowest out of 34 years sampled. The major factor was an incipient La Nina, specifically anomalously cold temperatures off the Pacific Coast of South America. Weakness in the low level Caribbean jet caused a shift in the coldest clouds from the Caribbean to the Pacific side of Central America. The character of tropopause temperature variability was that of upward propagating waves generated by local and nonlocal convection. These waves produced tropopause temperature variations of 3 K, with peak-to-peak variations of 8 K. At low levels in Central America, flow from the Sahara desert predominated; further south, the air came from the Amazon region. Convectively influenced air in the upper troposphere came from Central America, the northern Amazon region, the Atlantic ITCZ, and the North American monsoon. In the TTL, Asian and African convection affected the observed air masses. North of 10N in the Central American TTL, African and Asian convection may have contributed as much to the air masses as Central and South American convection. South of 8N, Asian and African convection had far less impact.

  2. 291. Permeabilidad a medio-largo plazo de los injertos arteriales compuestos en cirugía cardíaca de revascularización miocárdica

    Directory of Open Access Journals (Sweden)

    P. Losada Mora

    2012-04-01

    Conclusiones: Existe una alta permeabilidad a medio-largo plazo de injertos arteriales compuestos. La permeabilidad de los injertos venosos es menor que la de los arteriales, relacionándose ésta con la dislipemia. No se ha encontrado diferencias entre la utilización de AMD o AR y la mayor permeabilidad a medio-largo plazo.

  3. Modelos animales y células derivadas para su uso en la determinación de compuestos útiles en el tratamiento de linfomas de células T

    OpenAIRE

    Bustelo, Xosé R.; Ruiz Macías, Sergio; Santos de Dios, Eugenio

    2008-01-01

    [ES] La presente invención se encuadra dentro del campo de la biotecnología. Se refiere a un método para evaluar si un compuesto es efectivo en la prevención y/o tratamiento de una enfermedad asociada a linfomas de células T.

  4. Pressure and high-Tc superconductivity in sulfur hydrides.

    Science.gov (United States)

    Gor'kov, Lev P; Kresin, Vladimir Z

    2016-05-11

    The paper discusses fundamentals of record-TC superconductivity discovered under high pressure in sulfur hydride. The rapid increase of TC with pressure in the vicinity of Pcr ≈ 123GPa is interpreted as the fingerprint of a first-order structural transition. Based on the cubic symmetry of the high-TC phase, it is argued that the lower-TC phase has a different periodicity, possibly related to an instability with a commensurate structural vector. In addition to the acoustic branches, the phonon spectrum of H3S contains hydrogen modes with much higher frequencies. Because of the complex spectrum, usual methods of calculating TC are here inapplicable. A modified approach is formulated and shown to provide realistic values for TC and to determine the relative contributions of optical and acoustic branches. The isotope effect (change of TC upon Deuterium for Hydrogen substitution) originates from high frequency phonons and differs in the two phases. The decrease of TC following its maximum in the high-TC phase is a sign of intermixing with pairing at hole-like pockets which arise in the energy spectrum of the cubic phase at the structural transition. On-pockets pairing leads to the appearance of a second gap and is remarkable for its non-adiabatic regime: hydrogen mode frequencies are comparable to the Fermi energy.

  5. Achalasia diagnosed by 99mTc pertechnetate scintigraphy

    International Nuclear Information System (INIS)

    Mikosch, P.; Gallowitsch, H.J.; Kresnik, E.; Lind, P.

    1997-01-01

    A 73-year-old patient presented a 99m Tc scintiscan with a focal tracer accumulation left and caudal of the thyroid gland. Further investigations with sonography, CT, esophagoscopy and barium swallow provided the diagnosis of achalasia as the reason for focal 99m Tc retention caudal of the thyroid gland. Explanation for 99m Tc accumulation within the esophagus may be the nonspecific accumulation of 99m Tc not only in the thyroid gland but also in the salivary glands. Excretion of the tracer follows with the saliva. Structural and motor disorders of the esophagus can thus lead to focal tracer retention within the esophagus simulating thyroid tissue. (orig.) [de

  6. Analytical techniques for measurement of 99Tc in environmental samples

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Three new methods have been developed for measuring 99 Tc in environmental samples. The most sensitive method is isotope dilution mass spectrometry, which allows measurement of about 1 x 10 -12 grams of 99 Tc. Results on analysis of five samples by this method compare very well with values obtained by a second independent method, which involves counting of beta particles from 99 Tc and internal conversion electrons from /sup 97m/Tc. A third method involving electrothermal atomic absorption has also been developed. Although this method is not as sensitive as the first two techniques, the cost per analysis is expected to be considerably less for certain types of samples

  7. Chemistry of /sup 99m/Tc labeling kits

    International Nuclear Information System (INIS)

    Srivastava, S.C.; Meinken, G.; Richards, P.

    1976-01-01

    Problems have been reported with the use of kit-produced /sup 99m/Tc radiopharmaceuticals. This study was undertaken to understand the chemistry involved in various stannous kit systems. The relation between Tc, tin, and the ligands used to complex the reduced Tc was investigated. It is concluded that for reliable performance, stannous kits should be prepared so that most of the tin is kept in the usable (reducing) form; a solution would be to use minimum tin and a large excess of complexing agent. Oxidation of the Tc complex to free pertechnetate is not a major problem in most kit systems. 5 figures

  8. Synthesis and comparison of 99mTc-enrofloxacin and 99mTc-ciprofloxacin.

    NARCIS (Netherlands)

    Siaens, R.H.; Rennen, H.J.J.M.; Boerman, O.C.; Dierckx, R.A.; Slegers, G.

    2004-01-01

    The use of (99m)Tc-ciprofloxacin as a tracer for infection and inflammation has been examined and discussed in the literature extensively. Its alleged ability to discriminate between sterile inflammation and bacterial versus nonbacterial infections has led to an intense debate. Other labeled

  9. Comparison of Tc-99m maraciclatide and Tc-99m sestamibi molecular breast imaging in patients with suspected breast cancer.

    Science.gov (United States)

    O'Connor, Michael K; Morrow, Melissa M B; Hunt, Katie N; Boughey, Judy C; Wahner-Roedler, Dietlind L; Conners, Amy Lynn; Rhodes, Deborah J; Hruska, Carrie B

    2017-12-01

    Molecular breast imaging (MBI) performed with 99m Tc sestamibi has been shown to be a valuable technique for the detection of breast cancer. Alternative radiotracers such as 99m Tc maraciclatide may offer improved uptake in breast lesions. The purpose of this study was to compare relative performance of 99m Tc sestamibi and 99m Tc maraciclatide in patients with suspected breast cancer, using a high-resolution dedicated gamma camera for MBI. Women with breast lesions suspicious for malignancy were recruited to undergo two MBI examinations-one with 99m Tc sestamibi and one with 99m Tc maraciclatide. A radiologist interpreted MBI studies in a randomized, blinded fashion to assign an assessment score (1-5) and measured lesion size. Lesion-to-background (L/B) ratio was measured with region-of-interest analysis. Among 39 analyzable patients, 21 malignant tumors were identified in 21 patients. Eighteen of 21 tumors (86%) were seen on 99m Tc sestamibi MBI and 19 of 21 (90%) were seen on 99m Tc maraciclatide MBI (p = 1). Tumor extent measured with both radiopharmaceuticals correlated strongly with pathologic size ( 99m Tc sestamibi, r = 0.84; 99m Tc maraciclatide, r = 0.81). The L/B ratio in detected breast cancers was similar for the two radiopharmaceuticals: 1.55 ± 0.36 (mean ± S.D.) for 99m Tc sestamibi and 1.62 ± 0.37 (mean ± S.D.) for 99m Tc maraciclatide (p = 0.53). No correlation was found between the L/B ratio and molecular subtype for 99m Tc sestamibi (r s  = 0.12, p = 0.63) or 99m Tc maraciclatide (r s  = -0.12, p = 0.64). Of 20 benign lesions, 10 (50%) were seen on 99m Tc sestamibi and 9 of 20 (45%) were seen on 99m Tc maraciclatide images (p = 0.1). The average L/B ratio for benign lesions was 1.34 ±0.40 (mean ±S.D.) for 99m Tc sestamibi and 1.41 ±0.52 (mean ±S.D.) for 99m Tc maraciclatide (p = 0.75). Overall diagnostic performance was similar for both radiopharmaceuticals. AUC from ROC

  10. Direct {sup 99m}Tc labeling of Herceptin (trastuzumab) by {sup 99m}Tc(I) tricarbonyl ion

    Energy Technology Data Exchange (ETDEWEB)

    Chen, W.-J.; Yen, C.-L.; Lo, S.-T.; Chen, K.-T. [Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Lo, J.-M. [Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, Hsinchu 30013, Taiwan (China)], E-mail: jmlo@mx.nthu.edu.tw

    2008-03-15

    By simply incubating Herceptin (trastuzumab) with [{sup 99m}Tc(CO){sub 3}(OH{sub 2}){sub 3}]{sup +} ion in saline, a significant yield of {sup 99m}Tc-labeled trastuzumab was found to be achievable. The effective labeling may be based on that trastuzumab is inherent with endogenous histidine group to which {sup 99m}Tc(I) tricarbonyl ion can be strongly bound. For practical {sup 99m}Tc labeling processing, trastuzumab was purified beforehand from the commercial product, Herceptin (Genentech) via size exclusion chromatography to remove the excipient, {alpha}-histidine and a high-labeled yield could be obtained by incubating the purified trastuzumab with [{sup 99m}Tc(CO){sub 3}(OH{sub 2}){sub 3}]{sup +}. Retention of bioactivity of the {sup 99m}Tc(I)-labeled trastuzumab was validated using a cell binding test.

  11. Comportamiento de aceites poliinsaturados en la preparación de patatas fritas para consumo inmediato: Formación de nuevos compuestos y comparación de métodos analíticos

    Directory of Open Access Journals (Sweden)

    Masson, L.

    1997-10-01

    Full Text Available In this study, different analytical methods, i.e. polar compounds, polar compound distribution, free fatty acids, peroxide value, conjugated dienes and trienes, oxidized fatty acids, viscosity and oxifrit-test, are applied to samples of both initial polyunsaturated oils and their counterparts after being used in the frying of potatoes in fast food shops. Two main objectives were established: the study of formation of new compounds during the frying process and the evaluation of possibilities to substitute complex methodologies for simpler and more rapid techniques. Results indicated that, although new compounds comming from oxidation and polymerization stand out, 20% of the samples contained very high amounts of hydrolytic products i.e. diglycerides and fatty acids, whose formation is difficult to explain. From the analysis of correlation coefficients between analytical methods, the utility of free fatty acids and conjugated dienes (or viscosity to predict the amount of the main groups of new compounds in used polyunsaturated frying oils, was deduced.

    En este estudio se aplican diferentes métodos analíticos -compuestos polares, distribución de compuestos polares, acidez, índice de peróxidos, dienos y trienos conjugados, ácidos oxidados insolubles en éter de petróleo, viscosidad y ensayo oxifrit- a muestras de aceites de soja, girasol y mezclas de soja y colza, obtenidas en establecimientos públicos, antes y después de ser usadas en la fritura de patatas. Los dos objetivos principales fueron: conocer los compuestos formados durante el proceso de fritura de patatas y evaluar la posibilidad de sustitución de determinaciones complejas por métodos analíticos más simples y rápidos. Los resultados indicaron que, aunque los compuestos de polimerización y oxidación son los más representativos entre los nuevos compuestos originados durante el proceso, un 20% de las muestras contenían cantidades anormalmente elevadas de compuestos

  12. Materiales compuestos C/SiC para aplicaciones estructurales de alta temperatura. Parte II: Sistemas de protección contra la oxidación

    Directory of Open Access Journals (Sweden)

    Aparicio, M.

    2001-02-01

    Full Text Available The fact which currently excludes the use of C/SiC composites in high temperature structural applications is the high oxidation rate of carbon fibres at temperatures higher than 450ºC. In this second part of the paper, a review of the different oxidation protection systems, including inhibitors, surface modification of composites, coatings and previous infiltration of the substrates, has been carried out. The addition of inhibitors reduces the oxidation rate, but only up to 850ºC, while the surface modification of composites leads to thin coatings with poor thermal shock resistance. On the other hand, the external layers are the most usual method employed because allows combining different compositions and thicknesses. The multilayer coatings are especially interesting in applications with wide temperature range and thermal shocks requirements. The infiltration of substrate porosity improves slightly the oxidation resistance of C/SiC composites reducing the oxygen accessibility to carbon fibres. However, the infiltration complements very well the oxidation protection performance of a coating system at low temperature, since these normally present open cracks due to mismatch between coating and substrate thermal expansion coefficients.

    La utilización de los materiales compuestos C/SiC en aplicaciones estructurales a alta temperatura está limitada por la elevada velocidad de oxidación de la fibra de carbono a temperaturas superiores de 450ºC. En esta segunda parte del trabajo se realiza una revisión de las posibilidades de protección contra la oxidación de estos materiales, incluyendo inhibidores, modificación superficial del material compuesto, recubrimientos e infiltración previa del sustrato. La eficacia de los inhibidores de la reacción de oxidación esta restringida a temperaturas de hasta 850ºC, mientras que la modificación superficial del material compuesto da lugar a capas delgadas y poco resistentes a los ciclos t

  13. Tabla de frecuencias y espectros de absorción infrarroja de compuestos relacionados con la química del cemento

    Directory of Open Access Journals (Sweden)

    Vázquez-Moreno, T.

    1981-06-01

    Full Text Available Not available

    En los núms. 175, 177 y 179 de esta Revista "Materiales de Construcción" se ha publicado un trabajo con el título "Aplicaciones prácticas de la espectroscopia de absorción infrarroja en el estudio de los crudos, del clinker y del cemento portland anhidro"; en él se decía textualmente que... "se dará, en forma de tablas las frecuencias y asignaciones correspondientes a los espectros IR tanto de los compuestos que se van estudiando como otros muchos que se consideran de interés. Asimismo se incluirán los respectivos espectros IR". A causa de la extensión y de las propias características del anexo, se consideró oportuno el publicarlo separadamente, incluso bajo un título más explicativo.

  14. Materiales compuestos de matriz metálica. II parte. Métodos de procesado y consolidación de MMCs reforzados con partículas

    Directory of Open Access Journals (Sweden)

    Edil da Costa, Cesar

    2000-06-01

    Full Text Available This work is a review of the different forming and consolidation methods for particulate metal matrix composites. In the first part we focus in the forming methods from raw materials while the second is centred in the consolidation from preforms in order to get the final part.

    En este trabajo se ofrece una revisión de los distintos métodos de conformado y consolidación de materiales compuestos de matriz metálica reforzados con partículas. En una primera parte se hace hincapié en los métodos de conformado a partir de las materias primas y en la segunda en métodos de consolidación final a partir de preformas.

  15. Metodologías Sintéticas para la Obtención de Compuestos de Coordinación Metal-Orgánicos

    OpenAIRE

    Bazán Blau, Begoña del Pilar; Barandika Argoitia, Miren Gotzone; Calderón Casado, Ainhoa; Fidalgo Marijuan, Arkaitz; Llano Tomé, Francisco; Urtiaga Greaves, Miren Karmele; Arriortua Marcaida, María Isabel

    2016-01-01

    Comunicación a congreso (póster): Reunión conjunta de la Sociedad Española de Mineralogía y la Sociedad Española de Arcillas (SEM-SEA 2012), Bilbao 27-30 de junio 2012. La síntesis de compuestos híbridos orgánicos-inorgánicos o metal-organic framework (MOF) ha atraído un interés especial durante las últimas dos décadas, debido a la posibilidad de obtener una gran variedad de estructuras de interés para su empleo en aplicaciones relacionadas con los materiales porosos, como las zeolitas o e...

  16. Obtención y caracterización de materiales compuestos W-Cu para contactos eléctricos

    Directory of Open Access Journals (Sweden)

    Krivij, N.

    2003-08-01

    Full Text Available In the Cuban Metallurgical Research Center (CIME, are manufactured by powder metallurgy, shims of adjustment of a W-Cu composite material, that are used in the electrical contacts of the panels of control of the portico derricks that operate in the port of Havana City. The base material used has a composition of 70 % in mass electrolytic copper powder and wolfram powder of (30 % that is obtained by reduction from the oxide from wolfram. The powders are submitted to the stages of mixed, pressed and agglomeration and is obtained a composite material with free particles of W occluded in a counterfoil of Cu matrix, that do not interact and they provide the following properties: high melting temperature, high electro and thermo conductivity and corrosion resistance, high mechanical and electrical strengtheners, decrease weldability and stability during their development. However, when not reacting the volframio particles with the copper, the compound material will begin to fuse to the temperature of the copper, on the other hand and for the same reason the resistance to the corrosion should be similar to that of the pure copper. The shims of adjustment are fixed to the bodies of high purity copper welding with a silver alloy, the one which provides the maximum qualities of the Cu, as elasticity, breaking strength, thermal and electrical conductivities, as well corrosion resistance.

    En el Centro de Investigaciones Metalúrgicas (CIME, cubano, se fabrican por pulvimetalurgia, calzos de material compuesto volframio-cobre, que se utilizan en los contactos eléctricos de los paneles de control de las grúas pórtico que operan en el puerto de Ciudad de La Habana. El material base que se utiliza contiene un 70 % en masa de polvo de cobre electrolítico y polvo de volframio (30 %, que se obtiene por reducción del óxido de volframio. Los polvos se someten a las etapas de mezclado, prensado y sinterización obteniéndose un material compuesto con las

  17. Imaging of irradiated liver with Tc-99m-sulfur colloid and Tc-99m-IDA

    International Nuclear Information System (INIS)

    Gelfand, M.J.; Saha, S.; Aron, B.S.

    1981-01-01

    In three cases, irradiated regions of liver failed to concentrate Tc-99m-sulfur colloid. In two of these three, imaging with Tc-99m-acetanilide iminodiacetic acid (IDA) agents within five days showed near normal hepatic uptake of this hepatobiliary imaging agent. The hepatic parenchymal cells may be imaged with Tc-99m-IDA in some irradiated regions of liver, despite loss of reticuloendothelial cell function

  18. Cross-sections for formation of 99mTc through natRu(n,x) 99mTc reaction induced by neutrons at 13.5 and 14.8 MeV

    International Nuclear Information System (INIS)

    Luo Junhua; Han Jiuning; Tuo Fei; Kong Xiangzhong; Liu Rong; Jiang Li

    2012-01-01

    The cross-sections for formation of metastable state of 99 Tc ( 99m Tc, 140.511 keV, 6.01 h) through nat Ru(n,x) 99m Tc reaction induced by 13.5 MeV and 14.8 MeV neutrons were measured. Fast neutrons were produced via the 3 H(d,n) 4 He reaction on the K-400 neutron generator. Induced gamma activities were measured by a high-resolution gamma-ray spectrometer with a high-purity germanium (HpGe) detector. Measurements were corrected for gamma-ray attenuations, dead time and fluctuation of neutron flux. Data for nat Ru(n,x) 99m Tc reaction cross sections are reported to be 9.6±1.5 and 9.2±1.1 mb at 13.5±0.2 and 14.8±0.2 MeV incident neutron energies, respectively. Results were compared with the data by other authors. - Highlights: ► D–T neutron source was used to measure cross sections using activation method. ► 27 Al(n,α) 24 Na was used as the monitor for the measurement. ► Cross-sections for formation of 99m Tc through nat Ru(n,x) 99m Tc were measured. ► Data for nat Ru(n,x) 99m Tc reaction cross sections are reported. ► The results were discussed and compared with experimental data in the literature.

  19. Sup(99m)Tc-thioglucose

    International Nuclear Information System (INIS)

    Deckart, H.; Weiland, J.; Blottner, A.; Weiss, M.L.

    1978-01-01

    A procedure for labelling thioglucose with sup(99m)Tc with an efficiency of more than 95% yielding a compound with good in vitro and in vivo stability is presented. Pharmakokinetic studies in rats show slow blood-clearance and significant binding to plasma proteins and erythrocytes. Uptake in the kidneys was high and persistent. The whole body retention curve showed components with effective half-lives of 5 h (44,7%), 1,24 h (19,3%) and 7 min (36%). Autoradiography of kidney tissue reveal concentration of the compound in the epithelial cells of the tubulus of the cortex. No excretion via the liver was observed. The new compound was compared with other kidney scanning agents. Normal controls show in agreement with the animal experiments slow blood clearance and high as well as strong binding to plasma proteins. Whole-body retention combined with organ uptake studies show fast and persistent uptake in the kidneys so that the compound can be used for kidney imaging up to 24 h after application. Cumulative renal excretion is 18% of the dose during the first six hours. Finally, comparative studies of the differences in kidney imaging in normal patients and in patients with diseased kidneys using the new compound as well as conventional scanning agents ( 197 Hg neohydrine) and other sup(99m)Tc labelled compounds are presented. (author)

  20. Radiolabeling, quality control and radiochemical purity assessment of 99mTc-HYNIC-TOC

    International Nuclear Information System (INIS)

    Melero, Laura T.U.H.; Araujo, Elaine B.; Mengatti, Jair

    2009-01-01

    Somatostatine receptors are widely expressed by several tumors, especially of the neuroendocrine origin. In vivo images of these tumors using radiolabeled somatostatine analogues became a useful clinical tool in oncology. The aim of this work was the radiolabeling of the somatostatine analogue HYNIC-TOC with 99mTc as well as the evaluation of the radiochemical stability and quality control of labeled complex. 99mTc-HYNIC-TOC was produced by labeling conditions using 20 μg of peptide, 20 mg of tricine and 10 mg of EDDA as coligands, 1110 MBq of 99mTc (99Mo-99mTc IPEN-TEC generator) and 15 μg of SnCl 2 .2H 2 O. The reaction proceeds for 10 minutes at boiling water bath. Radiochemical purity of labeled preparation was evaluated by different chromatographic systems: ITLC-SG in methanol:ammonium acetate (1:1); TLC-SG in sodium citrate buffer 0.1 N pH 5.0 and methylethylketone, and HPLC employing column C-18, 5 μm, 4.6 mm x 250 mm, UV (220 nm), radioactivity detectors, 1 mL/minute flow of acetonitrile and trifluoroacetic acid solution 0.1 %. Labeled compound has been found radiochemically stable for 5 hours and radiochemical purity was higher than 90 %. The thin layer chromatographic systems enabled the separation of radiochemical species presented in the labeled mixture as well as HPLC system. The labeling procedure studied resulted in high radiochemical yield and easy preparation. Future works include the preparation of a lyophilized reagent to make feasible the preparation of 99mTc-HYNIC-TOC at nuclear medicine services in order to study the clinical potential of the radiopharmaceutical in diagnostic and staging of neuroendocrine tumors. (author)

  1. Radiolabeling, quality control and radiochemical purity assessment of {sup 99m}Tc-HYNIC-TOC

    Energy Technology Data Exchange (ETDEWEB)

    Melero, Laura T.U.H.; Araujo, Elaine B.; Mengatti, Jair [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    Somatostatine receptors are widely expressed by several tumors, especially of the neuroendocrine origin. In vivo images of these tumors using radiolabeled somatostatine analogues became a useful clinical tool in oncology. The aim of this work was the radiolabeling of the somatostatine analogue HYNIC-TOC with 99mTc as well as the evaluation of the radiochemical stability and quality control of labeled complex. 99mTc-HYNIC-TOC was produced by labeling conditions using 20 {mu}g of peptide, 20 mg of tricine and 10 mg of EDDA as coligands, 1110 MBq of 99mTc (99Mo-99mTc IPEN-TEC generator) and 15 {mu}g of SnCl{sub 2}.2H{sub 2}O. The reaction proceeds for 10 minutes at boiling water bath. Radiochemical purity of labeled preparation was evaluated by different chromatographic systems: ITLC-SG in methanol:ammonium acetate (1:1); TLC-SG in sodium citrate buffer 0.1 N pH 5.0 and methylethylketone, and HPLC employing column C-18, 5 {mu}m, 4.6 mm x 250 mm, UV (220 nm), radioactivity detectors, 1 mL/minute flow of acetonitrile and trifluoroacetic acid solution 0.1 %. Labeled compound has been found radiochemically stable for 5 hours and radiochemical purity was higher than 90 %. The thin layer chromatographic systems enabled the separation of radiochemical species presented in the labeled mixture as well as HPLC system. The labeling procedure studied resulted in high radiochemical yield and easy preparation. Future works include the preparation of a lyophilized reagent to make feasible the preparation of 99mTc-HYNIC-TOC at nuclear medicine services in order to study the clinical potential of the radiopharmaceutical in diagnostic and staging of neuroendocrine tumors. (author)

  2. Expanding the knowledge of the geographic distribution of Trypanosoma cruzi TcII and TcV/TcVI genotypes in the Brazilian Amazon.

    Directory of Open Access Journals (Sweden)

    Valdirene Dos Santos Lima

    Full Text Available Trypanosoma cruzi infection is a complex sylvatic enzooty involving a wide range of animal species. Six discrete typing units (DTUs of T. cruzi, named TcI to TcVI, are currently recognized. One unanswered question concerning the epidemiology of T. cruzi is the distribution pattern of TcII and hybrid DTUs in nature, including their virtual absence in the Brazilian Amazon, the current endemic area of Chagas disease in Brazil. Herein, we characterized biological samples that were collected in previous epizootiological studies carried out in the Amazon Basin in Brazil. We performed T. cruzi genotyping using four polymorphic genes to identify T. cruzi DTUs: mini-exon, 1f8, histone 3 and gp72. This analysis was conducted in the following biological samples: (i two T. cruzi isolates obtained by culturing of stools from the triatomine species Rhodnius picttipes and (ii five serum samples from dogs in which trypomastigotes were observed during fresh blood examination. We report for the first time the presence of TcII and hybrid DTUs (TcV/TcVI in the Amazon region in mixed infections with TcI. Furthermore, sequencing of the constitutive gene, gp72, demonstrated diversity in TcII even within the same forest fragment. These data show that TcII is distributed in the five main Brazilian biomes and is likely more prevalent than currently described. It is very probable that there is no biological or ecological barrier to the transmission and establishment of any DTU in any biome in Brazil.

  3. Electrolytic 99mTcO4- reduction: a different pathway to obtain 99mTc-labelled compounds

    International Nuclear Information System (INIS)

    Savio, E.; Kremer, C.; Gambino, D.; Kremer, E.; Leon, A.

    1991-01-01

    Electrolytic reduction of 99m TcO 4 - at inert electrodes to obtain 99m Tc cationic complexes and in vitro stability of labelled compounds were studied. Amines were used as neutral N-donor ligands and a systematic analysis of various parameters involved in the reduction process was performed. Usefulness of electrolytic reduction was proved as an alternative 99m Tc-labelling method. Its most important advantages are: production of complexes with a high radiochemical purity, negligible presence of red-hyd- 99m Tc, lack of foreign materials, simplicity of development and possibility of further applications. (author)

  4. The role of Tc-99m IDA hepatobiliary and Tc-99m colloid hepatic imaging in primary biliary cirrhosis

    International Nuclear Information System (INIS)

    Aburano, T.; Yokoyama, K.; Shuke, N.; Kinuya, S.; Takayama, T.; Tonami, N.; Hisada, K.

    1991-01-01

    To assess the presence of primary biliary cirrhosis, 15 patients at various histopathologic stages were studied by Tc-99m IDA hepatobiliary and/or Tc-99m colloid hepatic imaging. In the earlier stages (I and II), seven of eight patients (88%) showed uniform hepatic retention of Tc-99m IDA. Of seven patients in the same stage, however, four (57%) showed no abnormality on Tc-99m colliod imaging. In three of these four negative patients (75%), uniform hepatic retention of Tc-99m IDA was noted. In the later stages (III and IV), all seven patients showed decreased clearance with or without delayed tracer appearance in the intestine and prominent hepatic retention on Tc-99m IDA imaging; with Tc-99m colloid imaging there was enlargement of the spleen and increased activity in the spleen and bone marrow. Thus, Tc-99m IDA imaging is considered to be more useful in revealing this functional disorder at the earlier stage of primary biliary cirrhosis and in evaluating progression from an earlier to a later stage of disease. Tc-99m colloid imaging also effectively evaluated progression

  5. Preoperative radiological diagnosis by 99mTc·MIBI-99mTc subtraction scintigraphy for primary hyperparathyroidism

    International Nuclear Information System (INIS)

    Inouye, Takahiro; Tomita, Toshiki; Shinden, Seiichi; Takagi, Hitoshi; Kano, Shigeru.

    1996-01-01

    Preoperative radiological diagnosis constitutes the most important factor for the surgical treatment of hyperparathyroidism. In this regard, MRI is useful for detecting the abnormal parathyroid, but it is often difficult to localize it using MRI only. It is thus necessary to combine this procedure with excellent subtraction scintigraphy. We performed both 201 Tl- 99m Tc and 99m Tc·MIBI- 99m Tc subtraction scintigraphy in seven patients with primary hyperparathyroidism and compared them the radiological results. Five patients presented parathyroid adenomas and the rest hypertrophy of the parathyroid. We could detect the abnormal parathyroid in four patients (57.1%) by 201 Tl- 99m Tc subtraction scintigraphy and in six patients (85.7%) by 99m Tc·MIBI- 99m Tc subtraction scintigraphy. We therefore believe that 99m Tc·MIBI- 99m Tc subtraction scintigraphy will become an essential examination for primary hyperparathyroidism rather than the presently employed 201 Tl- 99m Tc subtraction scintigraphy. (author)

  6. Solubility study of Tc(IV) in a granitic water

    International Nuclear Information System (INIS)

    Liu, D.J.; Yao, J.; Wang, B.; Bruggeman, C.; Maes, N.

    2007-01-01

    The deep geological disposal of the high level radioactive wastes is expected to be a safe disposal method in most countries. The long-lived fission product 99 Tc is present in large quantities in nuclear wastes and its chemical behavior in aqueous solution is of considerable interest. Under oxidizing conditions technetium exists as the anionic species TcO 4 - whereas under the reducing conditions, expected to exist in a deep geological repository, it is generally predicted that technetium will be present as TcO 2 .nH 2 O. Hence, the mobility of Tc(IV) in reducing groundwater may be limited by the solubility of TcO 2 .nH 2 O under these conditions. Due to this fact it is important to investigate the solubility of TcO 2 .nH 2 O. The solubility determines the release of radionuclides from waste form and is used as a source term in radionuclide migration analysis in performance assessment of radioactive waste repository. Technetium(IV) was prepared by reduction of a technetate solution with Sn 2+ . The solubility of Tc(IV) has been determined in simulated groundwater and redistilled water under aerobic and anaerobic conditions. The effects of pH and CO 3 2- concentration of solution on solubility of Tc(IV) were studied. The concentration of total technetium and Tc(IV) species in the solutions were periodically determined by separating the oxidized and reduced technetium species using a solvent extraction procedure and counting the beta activity of the 99 Tc with a liquid scintillation counter. The experimental results show that the rate of oxidation of Tc(IV) in simulated groundwater and redistilled water is about (1.49 ∝ 1.86) x 10 -9 mol L -1 d -1 under aerobic conditions, while no Tc(IV) oxidation was detected in simulated groundwater and redistilled water under anaerobic conditions. Under aerobic or anaerobic conditions the solubility of Tc(IV) in simulated groundwater and redistilled water is equal on the whole after centrifugation or ultrafiltration. The

  7. 99mTc-MIBI, 99mTc-tetrofosmin and 99mTc-Q12 in vitro and in vivo

    International Nuclear Information System (INIS)

    Bernard, Bert F.; Krenning, Eric P.; Breeman, Wout A. P.; Ensing, Geert; Benjamins, Harry; Bakker, Willem H.; Visser, Theo J.; Jong, Marion de

    1998-01-01

    The aim of this study was to compare uptake of 99m Tc-MIBI, 99m Tc-tetrofosmin and 99m Tc-Q12 in vitro and biodistribution in vivo in rats. In vitro, uptake decreased in the order MIBI→tetrofosmin→Q12. Uptake of MIBI and tetrofosmin, but not of Q12, in cultured tumor cells was dependent on the plasma membrane and mitochondrial potential. In vivo, heart uptake of all three compounds was high and stable. Tumor uptake decreased in the order MIBI→Q12→tetrofosmin and the tumor/blood ratio in the order MIBI→tetrofosmin→Q12

  8. Comparison of relative renal function measured with either 99m Tc-DTPA or 99m Tc-EC dynamic scintigraphies with that measured with 99m Tc-DMSA static scintigraphy

    Energy Technology Data Exchange (ETDEWEB)

    Domingues, F.C.; Fujikawa, G.Y.; Decker, H.; Alonso, G.; Pereira, J.C.; Duarte, P.S. [Centro de Diagnostico Fleury, Sao Paulo, SP (Brazil). Secao de Medicina Nuclear; Sao Paulo Univ. (USP), SP (Brazil). Escola de Saude Publica. Dept. de Epidemiologia]. E-mail: paulo.duarte@fleury.com.br

    2006-07-15

    Objective: The aim of this study was to compare the renal function measured with either {sup 99m}Tc-DTPA or {sup 99m}Tc-EC dynamic scintigraphies with that measured using {sup 99m}Tc-DMSA static scintigraphy. Methods: the values of relative renal function measured in 111 renal dynamic scintigraphies performed either with {sup 99m}Tc-DTPA (55 studies) or with {sup 99m}Tc-EC (56 studies) were compared with the relative function measured using {sup 99m}Tc-DMSA static scintigraphy performed within a 1-month period. The comparisons were performed using Wilcoxon signed rank test. The number of {sup 99m}Tc-DTPA and {sup 99m}Tc-EC studies that presented relative renal function different by more than 5% from that measured with {sup 99m}Tc-DMSA, using chi square test were also compared. Results: the relative renal function measured with {sup 99m}Tc-EC is not statistically different from that measured with {sup 99m}Tc-DMSA (p = 0.97). The relative renal function measured with {sup 99m}Tc-DTPA was statistically different from that measured using {sup 99m}Tc-DMSA, but with a borderline statistical significance (p = 0.05). The number of studies with relative renal function different by more than 5% from that measured with {sup 99m}Tc-DMSA is higher for the {sup 99m}Tc-DTPA scintigraphy (p 0.04) than for {sup 99m}Tc-EC. Conclusion: the relative renal function measured with {sup 99m}Tc-EC dynamic scintigraphy is comparable with that measured with {sup 99m}Tc-DMSA static scintigraphy, while the relative renal function measured with {sup 99m}Tc-DTPA dynamic scintigraphy presents a significant statistical difference from that measured with {sup 99m}Tc-DMSA static scintigraphy. (author)

  9. Comparison of relative renal function measured with either 99m Tc-DTPA or 99m Tc-EC dynamic scintigraphies with that measured with 99m Tc-DMSA static scintigraphy

    International Nuclear Information System (INIS)

    Domingues, F.C.; Fujikawa, G.Y.; Decker, H.; Alonso, G.; Pereira, J.C.; Duarte, P.S.; Sao Paulo Univ.

    2006-01-01

    Objective: The aim of this study was to compare the renal function measured with either 99m Tc-DTPA or 99m Tc-EC dynamic scintigraphies with that measured using 99m Tc-DMSA static scintigraphy. Methods: the values of relative renal function measured in 111 renal dynamic scintigraphies performed either with 99m Tc-DTPA (55 studies) or with 99m Tc-EC (56 studies) were compared with the relative function measured using 99m Tc-DMSA static scintigraphy performed within a 1-month period. The comparisons were performed using Wilcoxon signed rank test. The number of 99m Tc-DTPA and 99m Tc-EC studies that presented relative renal function different by more than 5% from that measured with 99m Tc-DMSA, using chi square test were also compared. Results: the relative renal function measured with 99m Tc-EC is not statistically different from that measured with 99m Tc-DMSA (p = 0.97). The relative renal function measured with 99m Tc-DTPA was statistically different from that measured using 99m Tc-DMSA, but with a borderline statistical significance (p = 0.05). The number of studies with relative renal function different by more than 5% from that measured with 99m Tc-DMSA is higher for the 99m Tc-DTPA scintigraphy (p 0.04) than for 99m Tc-EC. Conclusion: the relative renal function measured with 99m Tc-EC dynamic scintigraphy is comparable with that measured with 99m Tc-DMSA static scintigraphy, while the relative renal function measured with 99m Tc-DTPA dynamic scintigraphy presents a significant statistical difference from that measured with 99m Tc-DMSA static scintigraphy. (author)

  10. An embedded system based computer controlled process automation for recovery and purification of 99mTc from (n,γ)99Mo

    International Nuclear Information System (INIS)

    De, Anirban; Pal, S.S.; Bhaskar, P.; Kumari, S.; Khare, V.K.; Duttaroy, A.; Garai, M.; Thakur, S.K.; Saha, S.; Chattopadhyay, Sankha; Barua, Luna; Das, Sujata Saha; Kumar, U.; Das, M.K.

    2012-01-01

    99 Mo produced 99 mTc (t 1/2 = 6 hr, 140 KeV γ-ray) is the most useful radioisotope for nuclear diagnostics. High specific activity 99 Mo is supplied globally mainly by five old reactors whose routine or unscheduled maintenance shutdown causes supply irregularities that adversely affects patient management in nuclear medicine centres. 99m Tc may also be produced via 98 Mo(n,γ) in a natural MoO 3 target in reactor or by 100 Mo(n,2n) 99 Mo or 100 Mo(p,2n) 99 mTc reaction in cyclotron. To meet the crisis proposals are there to produce 99 Mo by 100 Mo(n,2n) 99 Mo or 99m Tc directly by 100 Mo(p,2n) 99m Tc in a cyclotron. Of the several separation methods of 99 mTc from molybdenum, the most common are adsorption column chromatography, sublimation and liquid-liquid solvent extraction. The conventional methods besides being cumbersome are often hazardous, polluting, require skilled manpower and facilities like fume hood and so are not always practically feasible for hospitals. To address these, VECC and BRIT, Kolkata have collaborated to develop an embedded system based automated 99 Mo/ 99m Tc generator from low specific activity 99 Mo using solvent extraction technique, supervised by a PC based GUI. (author)

  11. Efficient preparation of {sup 99m}Tc(III) '4+1' mixed-ligand complexes for peptide labeling with high specific activity

    Energy Technology Data Exchange (ETDEWEB)

    Kunstler, Jens-Uwe [Biotectid GmbH, Deutscher Platz 5c, 04103 Leipzig (Germany); Seidel, Gesine [Institute of Radiopharmacy, Forschungszentrum Dresden-Rossendorf, P.O. Box 510 119, 01314 Dresden (Germany); Pietzsch, Hans-Jurgen, E-mail: h.j.pietzsch@fzd.d [Institute of Radiopharmacy, Forschungszentrum Dresden-Rossendorf, P.O. Box 510 119, 01314 Dresden (Germany)

    2010-09-15

    An improved labeling procedure for peptides attached to organometallic {sup 99m}Tc(III) '4+1' mixed-ligand complexes in which the radiometal is coordinated by a tripodal tetradentate chelator 2,2',2''-nitrilotriethanethiol (NS{sub 3}) and a monodentate isocyanide ligand is presented. The labeling procedure was evaluated by the synthesis of [{sup 99m}Tc(NS{sub 3})(L2-RGD)]. The containing radiopharmaceutically interesting RGD-peptide cyclo[Arg-Gly-Asp-D-Tyr-Lys] was modified with 4-isocyanobutanoic acid (L2) as linker conjugated to N{sup 6}-Lys to get the monodentate ligand L2-RGD. The structural identity of the {sup 99m}Tc-conjugate was confirmed by comparison to a Re reference compound. The Tc- and Re-conjugates had matching retention times under identical HPLC conditions. The {sup 99m}Tc-labeling was performed in a novel one-step procedure using the eluate of a {sup 99}Mo/{sup 99m}Tc generator, NS{sub 3}, the isocyanide modified peptide, SnCl{sub 2}, Na{sub 2}EDTA, mannitol and ascorbic acid in the reaction mixture. Using optimized reagents it is possible to label 50 nmol peptide with {sup 99m}Tc within 60 min at room temperature with a radiochemical yield higher than 95% and a specific activity of {approx}20 GBq/{mu}mol.

  12. {sup 201}Tl, {sup 99m}Tc-MIBI, {sup 99m}Tc-tetrofosmin and {sup 99m}Tc-furifosmin: relative retention and clearance kinetics in retrogradely perfused guinea pig hearts

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, Wolfgang M.; Moka, Detlef E-mail: detlef.moka@uni-koeln.de; Brockmann, Holger A.; Schomaecker, Klaus; Schicha, Harald

    2002-02-01

    Myocellular kinetics of {sup 201}Tl, {sup 99m}Tc-MIBI, {sup 99m}Tc-tetrofosmin and {sup 99m}Tc-furifosmin were investigated using retrogradely-perfused guinea-pig hearts. Relative retention decreased in the order {sup 99m}Tc-MIBI {yields}{yields} implies {sup 99m}Tc-tetrofosmin {yields}{yields} implies {sup 99m}Tc-furifosmin. {sup 201}Tl and {sup 99m}Tc-MIBI exhibited bi- (t1,t2), {sup 99m}Tc-tetrofosmin and {sup 99m}Tc-furifosmin triexponential (t1,t2,t3) time-activity-curves. Latest-phase elimination-half-life increased from {sup 201}Tl (t2) {yields}{yields} implies {sup 99m}Tc-MIBI (t2) {yields}{yields} implies {sup 99m}Tc-tetrofosmin (t3) {yields}{yields} implies {sup 99m}Tc-furifosmin (t3), showing a significant increase in deteriorating myocardium for all tracers but {sup 99m}Tc-furifosmin. Delayed elimination in deteriorating myocardium explains at least partly the redistribution phenomenon of {sup 201}Tl, and suggests a similar phenomenon for {sup 99m}Tc-MIBI and {sup 99m}Tc-tetrofosmin.

  13. Evaluation of the absorbed dose to the kidneys due to Tc{sup 99m} (DTPA) / Tc{sup 99m} (Mag3) and Tc{sup 99m} (Dmsa); Evaluacion de la dosis absorbida en los rinones debido al Tc{sup 99m} (DTPA) / Tc{sup 99m} (MAG3) y Tc{sup 99m} (DMSA)

    Energy Technology Data Exchange (ETDEWEB)

    Vasquez A, M.; Murillo C, F.; Castillo D, C.; Rocha J, J.; Sifuentes D, Y.; Sanchez S, P. [Universidad Nacional de Trujillo, Av. Juan Pablo II s/n, Trujillo (Peru); Idrogo C, J.; Marquez P, F., E-mail: marvva@hotmail.com [Instituto Nacional de Enfermedades Neoplasicas, Av. Angamos 2520, Lima (Peru)

    2015-10-15

    The absorbed dose in the kidneys of adult patients has been assessed using the biokinetics of radiopharmaceuticals containing Tc{sup 99m} (DTPA) / Tc{sup 99m} (Mag3) or Tc{sup 99m} (Dmsa).The absorbed dose was calculated using the formalism MIRD and the Cristy-Eckerman representation for the kidneys. The absorbed dose to the kidneys due to Tc{sup 99m} (DTPA) / Tc{sup 99m} (Mag3), are given by 0.00466 mGy.MBq{sup -1} / 0.00339 mGy.MBq{sup -1}. Approximately 21.2% of the absorbed dose is due to the bladder (content) and the remaining tissue, included in biokinetics of Tc{sup 99m} (DTPA) / Tc{sup 99m} (Mag3). The absorbed dose to the kidneys due to Tc{sup 99m} (Dmsa) is 0.17881 mGy.MBq{sup -1}. Here, 1.7% of the absorbed dose is due to the bladder, spleen, liver and the remaining tissue, included in biokinetics of Tc{sup 99m} (Dmsa). (Author)

  14. Cytological effects of Tc on young soybean plants

    International Nuclear Information System (INIS)

    Neel, J.W.; Onasch, M.A.

    1989-01-01

    Soybean seedlings (Glycine max cv. Williams) were exposed for 24 to 67 h to 99 TcO 4 - (Tc) at various concentrations in dilute culture solution. Reduced primary leaf midrib length was observed with 67-h exposures to greater than or equal to 6.0 mu M Tc. Cellular effects were consistently observed by a light microscope after 43-h or longer exposure to 6.6 microM Tc and higher concentrations. At lower Tc levels, abnormal cells were interspersed among cells of normal appearance. Abnormal cells displayed blockshaped nuclei which were more densely stained by Harris' hematoxylineosin Y than controls; such cells frequently demonstrated incipient plasmolysis. The number of affected cells increased with dose; both nuclei and cytoplasm demonstrated greater staining intensity and more severe plasmolysis at higher levels. At levels of greater than or equal to 13.2 Tc, cellular damage was extensive. Cells were reduced in size and were highly plasmolysed; cell walls were distorted, and intercellular spaces were reduced or became nonexistent. Mitotic activity was observed at Tc levels less than or equal to 9.9 microM. Observed Tc cellular effects are attributed principally to the alteration of membrane permeability characteristics

  15. Real-time new satellite product demonstration from microwave sensors and GOES-16 at NRL TC web

    Science.gov (United States)

    Cossuth, J.; Richardson, K.; Surratt, M. L.; Bankert, R.

    2017-12-01

    The Naval Research Laboratory (NRL) Tropical Cyclone (TC) satellite webpage (https://www.nrlmry.navy.mil/TC.html) provides demonstration analyses of storm imagery to benefit operational TC forecast centers around the world. With the availability of new spectral information provided by GOES-16 satellite data and recent research into improved visualization methods of microwave data, experimental imagery was operationally tested to visualize the structural changes of TCs during the 2017 hurricane season. This presentation provides an introduction into these innovative satellite analysis methods, NRL's next generation satellite analysis system (the Geolocated Information Processing System, GeoIPSTM), and demonstration the added value of additional spectral frequencies when monitoring storms in near-realtime.

  16. Occupational exposure to 99mTc and 131I in a radiopharmacy room

    International Nuclear Information System (INIS)

    Valle, Bruna P.; Cunha, Kenya Dias da; Sa, Lidia Vasconcellos de; Souza, Wanderson; Santos, Maristela; Medeiras, Geiza; Conceicao, Cirilo S.

    2009-01-01

    Brazil has about 310 nuclear medicine services and 90% of these services use Molybdenum/Technetium generators to prepare several radiopharmaceuticals to diagnostics; about 70% use also 131 I for diagnosis and therapy. These radionuclides are associated to compounds in liquid form and during the manipulation to prepare and administer the patient dose some radioactive airborne particle can be generated. As consequence the workers can be exposed to airborne particles in the respirable fraction containing 99m Tc and 131 I. The aim of this study is develop a simple and rapid method to verify if the exhaust systems installed in the SMN are efficient in preventing the inhalation of radionuclides airborne particles by workers. In order to estimate the occupational exposure a nuclear medicine service was selected and aerosol samples were collected using personal air sampler with a cyclone. The samples were analyzed using a germanium detector system and the 99m Tc and 131 I average concentrations were obtained as 16,6 ± 14,34 mBq/m 3 and 0.72 ± 0.36 mBq/m 3 , respectively. It was not observed a correlation among air concentration and total activity processed in laboratory. These results show that the worker inhales airborne particles containing 99m Tc and 131 I. (author)

  17. Occupational exposure to {sup 99m}Tc and {sup 131}I in a radiopharmacy room

    Energy Technology Data Exchange (ETDEWEB)

    Valle, Bruna P.; Cunha, Kenya Dias da; Sa, Lidia Vasconcellos de; Souza, Wanderson; Santos, Maristela; Medeiras, Geiza; Conceicao, Cirilo S. [Universidade do Estado, Nova Friburgo, RJ (Brazil). Inst. Politecnico. Dept. de Modelagem Computacional], e-mail: brunapvalle@gmail.com, e-mail: kenya@ird.gov.br, e-mail: lidia@ird.gov.br, e-mail: wander@ird.gov.br, e-mail: mstela@ird.gov.br; Abrantes, Marcio Borges de [Centro de Medicina Nuclear Guanabara, Rio de Janeiro, RJ (Brazil)], e-mail: marcioabrantes@pop.com.br

    2009-07-01

    Brazil has about 310 nuclear medicine services and 90% of these services use Molybdenum/Technetium generators to prepare several radiopharmaceuticals to diagnostics; about 70% use also {sup 131}I for diagnosis and therapy. These radionuclides are associated to compounds in liquid form and during the manipulation to prepare and administer the patient dose some radioactive airborne particle can be generated. As consequence the workers can be exposed to airborne particles in the respirable fraction containing {sup 99m}Tc and {sup 131}I. The aim of this study is develop a simple and rapid method to verify if the exhaust systems installed in the SMN are efficient in preventing the inhalation of radionuclides airborne particles by workers. In order to estimate the occupational exposure a nuclear medicine service was selected and aerosol samples were collected using personal air sampler with a cyclone. The samples were analyzed using a germanium detector system and the {sup 99m}Tc and {sup 131}I average concentrations were obtained as 16,6 {+-} 14,34 mBq/m{sup 3} and 0.72 {+-} 0.36 mBq/m{sup 3}, respectively. It was not observed a correlation among air concentration and total activity processed in laboratory. These results show that the worker inhales airborne particles containing {sup 99m}Tc and {sup 131}I. (author)

  18. Microextracción en fase sólida de compuestos volátiles en albahaca (Ocimum basilicum L. Microextracción en fase sólida de compuestos volátiles en albahaca (Ocimum basilicum L.

    Directory of Open Access Journals (Sweden)

    Isaac Andrade-González

    2012-02-01

    Full Text Available Volatile compounds of basil (Ocimum basilicum L. were extracted with solid phase microextraction(SPME and analyzed with gas chromatography-mass spectrometry (GC-MS. TwoSPME fiber coatings, Polydimethylsiloxane/Divinylbenzene (PDMS/DVB, 65 μm and Carbowax/Divinylbenzene (CW/DVB, 65 μm were evaluated in order to compare the extraction ofcomponents. Among the 25 volatile compounds detected were phenylpropanoids, monoterpenes,sesquiterpenes, esters, and aldehydes. There were significant (P Los compuestos volátiles de la albahaca (Ocimum basilicum L. fueron extraídos mediante la microextracción en fase sólida (SPME y analizados con cromatografía de gases-espectrometría de masas (GC-MS. Se evaluaron dos fibras, Polidimetilsiloxano/Divinilbenceno (PDMS/DVB, 65 μm y Carbowax/Divinilbenceno (CW/DVB, 65 μm, para comparar la extracción de componentes. Entre los 25 compuestos volátiles recuperados en la albahaca, se identificaron fenilpropanoides, monoterpenos, sesquiterpenos, ésteres, y aldehídos. Hubieron diferencias significativas (P Cuantitativamente, el componente más importante fue el cinamato de metilo, seguido por el linalol.

  19. Performance of TcI/TcVI/TcII Chagas-Flow ATE-IgG2a for universal and genotype-specific serodiagnosis of Trypanosoma cruzi infection.

    Directory of Open Access Journals (Sweden)

    Glaucia Diniz Alessio

    2017-03-01

    Full Text Available Distinct Trypanosoma cruzi genotypes have been considered relevant for patient management and therapeutic response of Chagas disease. However, typing strategies for genotype-specific serodiagnosis of Chagas disease are still unavailable and requires standardization for practical application. In this study, an innovative TcI/TcVI/TcII Chagas Flow ATE-IgG2a technique was developed with applicability for universal and genotype-specific diagnosis of T. cruzi infection. For this purpose, the reactivity of serum samples (percentage of positive fluorescent parasites-PPFP obtained from mice chronically infected with TcI/Colombiana, TcVI/CL or TcII/Y strain as well as non-infected controls were determined using amastigote-AMA, trypomastigote-TRYPO and epimastigote-EPI in parallel batches of TcI, TcVI and TcII target antigens. Data demonstrated that "α-TcII-TRYPO/1:500, cut-off/PPFP = 20%" presented an excellent performance for universal diagnosis of T. cruzi infection (AUC = 1.0, Se and Sp = 100%. The combined set of attributes "α-TcI-TRYPO/1:4,000, cut-off/PPFP = 50%", "α-TcII-AMA/1:1,000, cut-off/PPFP = 40%" and "α-TcVI-EPI/1:1,000, cut-off/PPFP = 45%" showed good performance to segregate infections with TcI/Colombiana, TcVI/CL or TcII/Y strain. Overall, hosts infected with TcI/Colombiana and TcII/Y strains displayed opposite patterns of reactivity with "α-TcI TRYPO" and "α-TcII AMA". Hosts infected with TcVI/CL strain showed a typical interweaved distribution pattern. The method presented a good performance for genotype-specific diagnosis, with global accuracy of 69% when the population/prototype scenario include TcI, TcVI and TcII infections and 94% when comprise only TcI and TcII infections. This study also proposes a receiver operating reactivity panel, providing a feasible tool to classify serum samples from hosts infected with distinct T. cruzi genotypes, supporting the potential of this method for universal and genotype-specific diagnosis

  20. Nuclear quadrupole moment of the 99Tc ground state

    International Nuclear Information System (INIS)

    Errico, Leonardo; Darriba, German; Renteria, Mario; Tang Zhengning; Emmerich, Heike; Cottenier, Stefaan

    2008-01-01

    By combining first-principles calculations and existing nuclear magnetic resonance (NMR) experiments, we determine the quadrupole moment of the 9/2 + ground state of 99 Tc to be (-)0.14(3)b. This confirms the value of -0.129(20)b, which is currently believed to be the most reliable experimental determination, and disagrees with two earlier experimental values. We supply ab initio calculated electric-field gradients for Tc in YTc 2 and ZrTc 2 . If this calculated information would be combined with yet to be performed Tc-NMR experiments in these compounds, the error bar on the 99 Tc ground state quadrupole moment could be further reduced

  1. 99Tc in the Irish Sea. Recent trends

    International Nuclear Information System (INIS)

    McCartney, M.; Rajendran, K.

    1997-01-01

    The increase in discharges of 99 Tc from Sellafield has resulted in an ideal opportunity to study the behaviour of this radionuclide in the aquatic environment. Results, thus far, have demonstrated that 99 Tc uptake by seaweeds collected from around the Irish Sea has followed the anticipated trend, with brown seaweeds accumulating 100-1000 times more 99 Tc than red or green algae. The large increase in discharges of 99 Tc from Sellafield in 1994 had been matched by a similar increase in the levels present in brown seaweeds, mussels and winkles for which concentration factors of 24000, 5000 and 100, respectively, have been derived. This confirms the observation that 99 Tc uptake by marine organisms in the field far exceeds that which would be expected from laboratory studies. Thus, it is concluded that, given the radiological importance of this nuclide, the provision of more accurate information on its environmental behaviour is required. (author)

  2. /sup 99m/Tc labelled ulcer avid agents

    International Nuclear Information System (INIS)

    Scopinaro, F.; Linari, G.; Baldieri, M.; Liberatore, M.; Corti, E.; Signori, C.

    1986-01-01

    Sulfated oligosaccharides have some interesting pharmacological properties: they are anticoagulants and protect the ulcerative areas of epithelia by precipitating over ulcers together with exudative proteins. Some sucralfate labelling methods using /sup 75/Se, /sup 111/In, /sup 99m/Tc-albumin and /sup 99m/Tc-DTPA have been reported. Only the /sup 99m/Tc-sucralfate has, at present, the requisites to be used as an ulcer-seeking agent. The aim of this study were: (a) to introduce a simple and easy-to-repeat method for the labelling of sucralfate with /sup 99m/Tc-DTPA; (b) to demonstrate that it is possible to label the sucrose octasulfate directly with /sup 99m/Tc without the aid of other ligands (e.g. DTPA)

  3. Molybdenum-99/technetium-99M generators

    International Nuclear Information System (INIS)

    Morcos, N.A.; Bruno, G.A.; Haney, T.A.

    1981-01-01

    A 99 Mo/sup(99m)Tc generator is described which has an alumina support medium consisting of multiple beds of controlled pH and in which no bed has a pH value higher than the bed preceding it. It is claimed that by using this method low yield problems of such generators can be mitigated. (U.K.)

  4. Wind turbine certification - the committee draft by IEC-TC88-WG9

    Energy Technology Data Exchange (ETDEWEB)

    Hauge Madsen, P [Risoe National Lab., Wind Energy and Atmospheric Physics Dept., Roskilde (Denmark)

    1999-03-01

    In 1995 the Technical Committee TC88 of the International Electrotechnical Commission decided to start a new work item, namely to prepare a standard for the certification procedures for wind turbines with respect to safety, performance, interaction with the public grid, environmental requirements and the documentation requested by the certification bodies. The purpose was to provide a common basis for certification of wind turbines, including a basis for accreditation of certification bodies and mutual recognition of certificates. A working group (WG9) was created to prepare a committee draft. WG9 submitted the result late in 1998 to TC88. This paper presents the committee draft Standard, which defines a certification system for Wind Turbine Generator Systems. Key issues in the evaluation of conformity with these standards and identified needs for other technical criteria and procedures are presented. (au) 10 refs.

  5. 99mTc-DTPA renography before and after extracorporeal shock wave lithotripsy for renal calculi

    International Nuclear Information System (INIS)

    Ohtake, Eiji; Murata, Hajime; Kanemura, Mikio; Yokoyama, Masao

    1988-01-01

    This study was undertaken to evaluate 99m Tc-DTPA renography before and after extracorporeal shock wave lithotripsy (ESWL). Twelve patients with renal calculi were examined in this study. In three patients, bilateral kidneys were treated with ESWL. Sequential renal images of the vascular phase, and the functional and excretory phases were taken using a gamma camera (ZLC 7500, Siemens), after intravenous injection of 555 MBq of 99m Tc-DTPA. Renograms were generated using data stored every 10 seconds for a period of 30 minutes by computer (Scintipac-2400, Shimadzu). Some treated kidneys were enlarged and/or showed uniform retention of radioactivity on sequential images, within a week after ESWL. Renogram patterns after ESWL were varied in each patient. The renogram findings after ESWL seemed to be affected by the presence or absence of stone fragments in the urinary tract. (author)

  6. The preparation of {sup 99m}Tc from {sup 99}Mo-{sup 99m}Tc using Poly-Zirconium Compound (PZC)

    Energy Technology Data Exchange (ETDEWEB)

    Laohawilai, S [Isotope Production Div., Office of Atomic Energy for Peace (Thailand)

    1998-10-01

    The process of for providing the {sup 99m}Tc-gel generator followed the protocol that received from Department of Radioisotopes, Tokai Research Establishment, JAERI. Sodium molybdate (molybdenum-99), pH 7 with concentration 20 mg/ml and activity nearly 1 mCi/ml was added into the adsorbent (PZC). The total activity of {sup 99}Mo was about 10 mCi and the heating time was varied from 3-18 hours at 70degC. The properties of the gel were studied for elution profile and elution efficiency. The molybdenum breakthrough in sodium pertechnetate (technetium-99m) was also performed. (author)

  7. AC losses in high Tc superconductors

    International Nuclear Information System (INIS)

    Campbell, A.M.

    1998-01-01

    Full text: Although in principle the AC losses in high Tc superconductors can be calculated from the critical current density, a number of complications make this difficult. The Jc is very field dependent, there are intergranular and intragranular critical currents, the material is anisotropic and there is usually a large demagnetising factor. Care must be taken in interpreting electrical measurements since the voltage depends on the position of the contacts. In spite of these complications the simple theory of Norris has proved surprisingly successful and arguments will be presented as to why this is the case. Results on a range of tapes will be compared with theory and numerical methods for predicting losses discussed. Finally a theory for coupling losses will be given for a composite conductor with high resistance barriers round the filaments

  8. RILEM TC ISR Summer 2015 Activity Report

    Energy Technology Data Exchange (ETDEWEB)

    Le Pape, Yann [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-08-01

    With aging infrastructures, instances of Alkali Silica Reaction (ASR) and Delayed Ettringite Formation (DEF), broadly covered under the term Internal Swelling Reaction (ISR), are increasingly being detected. They have been observed in bridges, dams, and most recently in nuclear power plants. Concrete swelling may result in bridge partial failure, dams with structural cracks and misaligned turbine shafts, and locked slice gates. For nuclear reactors micro-cracks may cause increased gas permeability which will jeopardize the containment integrity and may decrease the residual structural resistance under accidental loading. This TC, which limits its activity to structures with known expansive concrete, seeks to address two complementary but fundamental questions: a) What is the kinetics of the reaction and b) How would it affect the integrity