WorldWideScience

Sample records for tan spot pyrenophora

  1. Reaction of Global Collection of Rye (Secale cereale L.) to Tan Spot and Pyrenophora tritici-repentis Races in South Dakota.

    Science.gov (United States)

    Abdullah, Sidrat; Sehgal, Sunish K; Glover, Karl D; Ali, Shaukat

    2017-06-01

    Rye ( Secale cereale L.) serves as an alternative host of Pyrenophora tritici-repentis ( PTR ) the cause of tan spot on wheat. Rye is cultivated as a forage or cover crop and overlaps with a significant portion of wheat acreage in the U.S. northern Great Plains; however, it is not known whether the rye crop influences the evolution of PTR races. We evaluated a global collection of 211 rye accessions against tan spot and assessed the diversity in PTR population on rye in South Dakota. All the rye genotypes were inoculated with PTR races 1 and 5, and infiltrated with Ptr ToxA and Ptr ToxB, at seedling stage. We observed 21% of the genotypes exhibited susceptibility to race 1, whereas, 39% were susceptible to race 5. All 211 accessions were insensitive to both the Ptr toxins. It indicates that though rye exhibits diversity in reaction to tan spot, it lacks Ptr ToxA and ToxB sensitivity genes. This suggests that unknown toxins or other factors can lead to PTR establishment in rye. We characterized the race structure of 103 PTR isolates recovered from rye in South Dakota. Only 22% of the isolates amplified Ptr ToxA gene and were identified as race 1 based on their phenotypic reaction on the differential set. The remaining 80 isolates were noted to be race 4. Our results show that races 1 and 4 are prevalent on rye in South Dakota with a higher frequency of race 4, suggesting a minimal role of rye in the disease epidemiology.

  2. Some topics in tan spot epidemiology - characteristic and significance the sources of primary infection

    Directory of Open Access Journals (Sweden)

    Wojciwch Wakuliński

    2013-12-01

    Full Text Available The aim of this studies was characteristic of the sources of primary infection for tan spot. During the period 1998-1991 the development of ascomata and conidimata of Pyrenophora tritici-repentis on naturally infected wheat and triticale straws was monitored. The process of pseudothecia formation was extending over the time. It started immediately after harvest and protothecia of the fungus was commonly occurred each year already in the fall. The first fruit bodies with maturated typically pigmented ascospores were observed in January 2001 and in February 1998 and 1999. The percentage of pseudothecia with maturate ascospores successively increased richening maximum in April when the massive liberation of spores from asci occurred. After the total ascospore release on surface of empty ascomata aroused conidiophores with conidia which may also act as inoculum source. Moreover this type of sporulation was observed directly on over wintered cereals stems especially after prolonged period of rains. The present studies indicated also on infected by P.tritici-repentis wheat and triticale seeds as a source of inoculum for tan spot.

  3. Insights into Tan Spot and Stem Rust Resistance and Susceptibility by Studying the Pre-Green Revolution Global Collection of Wheat

    OpenAIRE

    Abdullah, Sidrat; Sehgal, Sunish Kumar; Jin, Yue; Turnipseed, Brent; Ali, Shaukat

    2017-01-01

    Tan spot (TS), caused by the fungus Pyrenophora tritici-repentis (Died) Drechs, is an important foliar disease of wheat and has become a threat to world wheat production since the 1970s. In this study a globally diverse pre-1940s collection of 247 wheat genotypes was evaluated against Ptr ToxA, P. tritici-repentis race 1, and stem rust to determine if; (i) acquisition of Ptr ToxA by the P. tritici-repentis from Stagonospora nodorum led to increased pathogen virulence or (ii) incorporation of ...

  4. Simple Method to Produce in vitro Pyrenophora tritici-repentis Teleomorph

    Directory of Open Access Journals (Sweden)

    Hamida Benslimane

    2014-12-01

    Full Text Available A fungus Pyrenophora tritici-repentis induces tan spot of wheat which is a foliar disease that causes yield loss to wheat crops worldwide. In this study, a new, simple and non-costly technique was performed to produce the sexual stage of this fungus in culture, within 9 weeks using wheat straw. This protocol will be helpful to researchers studying the biology of sexual stage development, disease epidemiology and genetics of this fungus.

  5. Chromosomal location and molecular mapping of tan spot resistance genes in common wheat (T. aestivum L.)

    OpenAIRE

    Tadesse, Wuletaw

    2008-01-01

    In this study, 75 cultivars highly resistant to tan spot were identified. A positive correlation (r = 0.864; P = 0.001) was found between seedling resistance and adult plant resistance. Inheritance of tan spot resistance was found to be qualitative goverened by single major genes. Three novel resistance genes: tsn3, tsn4 and tsn5 were identified and located on chromosomes 3D, 3A and 3B, respectively. Linkage analysis using SSR markers showed that both the tsn3 (tsn3a, Tsn3b and tsn3c) and ts...

  6. Insights into Tan Spot and Stem Rust Resistance and Susceptibility by Studying the Pre-Green Revolution Global Collection of Wheat

    Directory of Open Access Journals (Sweden)

    Sidrat Abdullah

    2017-04-01

    Full Text Available Tan spot (TS, caused by the fungus Pyrenophora tritici-repentis (Died Drechs, is an important foliar disease of wheat and has become a threat to world wheat production since the 1970s. In this study a globally diverse pre-1940s collection of 247 wheat genotypes was evaluated against Ptr ToxA, P. tritici-repentis race 1, and stem rust to determine if; (i acquisition of Ptr ToxA by the P. tritici-repentis from Stagonospora nodorum led to increased pathogen virulence or (ii incorporation of TS susceptibility during development stem rust resistant cultivars led to an increase in TS epidemics globally. Most genotypes were susceptible to stem rust; however, a range of reactions to TS and Ptr ToxA were observed. Four combinations of disease-toxin reactions were observed among the genotypes; TS susceptible-Ptr ToxA sensitive, TS susceptible-Ptr ToxA insensitive, TS resistant-Ptr ToxA insensitive, and TS resistant-Ptr ToxA toxin sensitive. A weak correlation (r = 0.14 for bread wheat and −0.082 for durum was observed between stem rust susceptibility and TS resistance. Even though there were no reported epidemics in the pre-1940s, TS sensitive genotypes were widely grown in that period, suggesting that Ptr ToxA may not be an important factor responsible for enhanced prevalence of TS.

  7. Insights into Tan Spot and Stem Rust Resistance and Susceptibility by Studying the Pre-Green Revolution Global Collection of Wheat.

    Science.gov (United States)

    Abdullah, Sidrat; Sehgal, Sunish Kumar; Jin, Yue; Turnipseed, Brent; Ali, Shaukat

    2017-04-01

    Tan spot (TS), caused by the fungus Pyrenophora tritici-repentis (Died) Drechs, is an important foliar disease of wheat and has become a threat to world wheat production since the 1970s. In this study a globally diverse pre-1940s collection of 247 wheat genotypes was evaluated against Ptr ToxA, P. tritici-repentis race 1, and stem rust to determine if; (i) acquisition of Ptr ToxA by the P. tritici-repentis from Stagonospora nodorum led to increased pathogen virulence or (ii) incorporation of TS susceptibility during development stem rust resistant cultivars led to an increase in TS epidemics globally. Most genotypes were susceptible to stem rust; however, a range of reactions to TS and Ptr ToxA were observed. Four combinations of disease-toxin reactions were observed among the genotypes; TS susceptible-Ptr ToxA sensitive, TS susceptible-Ptr ToxA insensitive, TS resistant-Ptr ToxA insensitive, and TS resistant-Ptr ToxA toxin sensitive. A weak correlation (r = 0.14 for bread wheat and -0.082 for durum) was observed between stem rust susceptibility and TS resistance. Even though there were no reported epidemics in the pre-1940s, TS sensitive genotypes were widely grown in that period, suggesting that Ptr ToxA may not be an important factor responsible for enhanced prevalence of TS.

  8. In Vitro Morphological Characteristics of Pyrenophora tritici-repentis Isolates from Several Algerian Agro-Ecological Zones

    Directory of Open Access Journals (Sweden)

    Hamida Benslimane

    2017-04-01

    Full Text Available Tan spot caused by the fungus Pyrenophora triticirepentis is a serious disease of wheat, which is on increase in recent years in Mediterranean region. In the field this fungus produces a diamond-shaped necrotic lesions with a yellow halo on wheat foliage. The objective of this study was to characterize and compare several monospore isolates of P. tritici-repentis collected from different infected wheat fields in various locations of Algeria, and find the morphological differences between them, if any. The results revealed wide morphologically variation among the isolates based on colony colors and texture, mycelial radial growth and conidial size.

  9. Dose and application rate of fungicide to control leaf rust (Puccinia triticina and yellow spot (Pyrenophora tritici repentis of wheat

    Directory of Open Access Journals (Sweden)

    Gustavo Migliorini de Oliveira

    2015-02-01

    Full Text Available The aim of this paper was to study the role of dose and rate of application, and the effect of concentration of fungicide in the spray solution resulted from the interaction of these factors, in the control of leaf rust and yellow spot of wheat. It was conducted two experiments, the first used the CD 104 cultivar (susceptible to lead rust and yellow spot. The experimental design was an factorial 3 x 3 + untreated control, that involve the factors dose (0,25, 0,30 and 0,35 L.ha-1 and application rate (143, 286 and 429 L.ha-1. The second experiment used the BRS 208 cultivar (resistant to leaf rust and moderately resistant to yellow spot. The experimental design was an factorial 2 x 2 + untreated control, consisting the factors dose (0,2 and 0,3 L.ha-1 and application rate (143 and 286 L.ha-1. The applications were made with a coastal sprayer by CO2, pressure of 250 kPa, XR 110-02 nozzle, which generated an application rate of 143 L.ha-1. The respective rates of each treatment were changed by the number of sprayers per area. It was also used a spore trap denominated Siga, associated with meteorological data and weather forecast, which detected spores of rust and yellow spot before the symptoms in the plants, helping in the identification of disease and in the timing of application. There wasn´t any interaction between dose and rate of application for any of the experiments, therefore, there wasn´t effect of concentration of fungicide in control. The dose and rate of application just influenced in the control of the yellow spot. Higher doses and rates were more effective. However, no difference was observed for yield and hectolitre weight among treatments, except untreated control

  10. Distribution of races of Pyrenophora tritici-repentis in Algeria and identication of a new virulence type

    Directory of Open Access Journals (Sweden)

    Hamida BENSLIMANE

    2011-09-01

    Full Text Available Tan spot, caused by Pyrenophora tritici-repentis, is a foliar disease  of wheat, responsible for high economic losses in several wheat  growing areas in the world. There are eight known races of P. tritici-repentis based on ability to induce necrosis and/or chlorosis on a set of differential cultivars. Fifty five isolates of P. tritici-repentis  originating from diverse wheat growing regions in Algeria were  studied to determine which races are present and to identify new  races. Races 1, 4, 5, 6, 7 and 8 were found and a new virulence pattern was identified. Isolates with this pattern induced necrosis in durum  wheat but failed to induce any disease in the common wheat  genotypes in the differential set.

  11. Phyllosticta citriasiana sp nov., the cause of Citrus tan spot of Citrus maxima in Asia

    NARCIS (Netherlands)

    Wulandari, N.F.; To-anun, C.; Hyde, K.D.; Duong, L.M.; de Gruyter, J.; Meffert, J.P.; Groenewald, J.Z.; Crous, P.W.

    2009-01-01

    Guignardia citricarpa, the causal agent of Citrus Black Spot, is subject to phytosanitary legislation in the European Union and the U.S.A. This species is frequently confused with G. mangiferae, which is a non-pathogenic, and is commonly isolated as an endophyte from citrus fruits and a wide range

  12. Phyllosticta citriasiana sp. nov., the cause of Citrus tan spot of Citrus maxima in Asia

    NARCIS (Netherlands)

    Wulandari, N.F.; To-anun, C.; Hyde, K.D.; Duong, L.M.; Gruyter, de J.; Meffert, J.P.; Groenewald, J.Z.; Crous, P.W.

    2009-01-01

    Guignardia citricarpa, the causal agent of Citrus Black Spot, is subject to phytosanitary legislation in the European Union and the U.S.A. This species is frequently confused with G. mangiferae, which is a non-pathogenic, and is commonly isolated as an endophyte from citrus fruits and a wide range

  13. Tan spot susceptibility governed by the Tsn1 locus and race-nonspecific resistance quantitative trait loci in a population derived from the wheat lines Salamouni and Katepwa

    Science.gov (United States)

    Wheat-tan spot interactions are known to have an inverse gene-for-gene relationship where pathogen-produced necrotrophic effectors are recognized by host sensitivity genes to cause susceptibility. However, broad-spectrum non race-specific resistance quantitative trait loci (QTL) that do not conform...

  14. Characterizing the Pyrenophora teres f. maculata – barley interaction using pathogen genetics

    Science.gov (United States)

    Pyrenophora teres f. maculata is the cause of the foliar disease spot form net blotch (SFNB) on barley. To evaluate pathogen genetics underlying the P. teres f. maculata- barley interaction, we developed a 105-progeny population by crossing two globally diverse isolates, one from North Dakota, USA a...

  15. Comparative Genomics of a Plant-Pathogenic Fungus, Pyrenophora tritici-repentis, Reveals Transduplication and the Impact of Repeat Elements on Pathogenicity and Population Divergence

    Energy Technology Data Exchange (ETDEWEB)

    Manning, Viola A.; Pandelova, Iovanna; Dhillon, Braham; Wilhelm, Larry J.; Goodwin, Stephen B.; Berlin, Aaron M.; Figueroa, Melania; Freitag, Michael; Hane, James K.; Henrissat, Bernard; Holman, Wade H.; Kodira, Chinnappa D.; Martin, Joel; Oliver, Richard P.; Robbertse, Barbara; Schackwitz, Wendy; Schwartz, David C.; Spatafora, Joseph W.; Turgeon, B. Gillian; Yandava, Chandri; Young, Sarah; Zhou, Shiguo; Zeng, Qiandong; Grigoriev, Igor V.; Ma, Li-Jun; Ciuffetti, Lynda M.

    2012-08-16

    Pyrenophora tritici-repentis is a necrotrophic fungus causal to the disease tan spot of wheat, whose contribution to crop loss has increased significantly during the last few decades. Pathogenicity by this fungus is attributed to the production of host-selective toxins (HST), which are recognized by their host in a genotype-specific manner. To better understand the mechanisms that have led to the increase in disease incidence related to this pathogen, we sequenced the genomes of three P. tritici-repentis isolates. A pathogenic isolate that produces two known HSTs was used to assemble a reference nuclear genome of approximately 40 Mb composed of 11 chromosomes that encode 12,141 predicted genes. Comparison of the reference genome with those of a pathogenic isolate that produces a third HST, and a nonpathogenic isolate, showed the nonpathogen genome to be more diverged than those of the two pathogens. Examination of gene-coding regions has provided candidate pathogen-specific proteins and revealed gene families that may play a role in a necrotrophic lifestyle. Analysis of transposable elements suggests that their presence in the genome of pathogenic isolates contributes to the creation of novel genes, effector diversification, possible horizontal gene transfer events, identified copy number variation, and the first example of transduplication by DNA transposable elements in fungi. Overall, comparative analysis of these genomes provides evidence that pathogenicity in this species arose through an influx of transposable elements, which created a genetically flexible landscape that can easily respond to environmental changes.

  16. Yi Tan

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science. Yi Tan. Articles written in Bulletin of Materials Science. Volume 38 Issue 5 September 2015 pp 1429-1433. Evaluation on electrical resistivity of silicon materials after electron beam melting · Hafiz Muhammad Noor Ul Huda Khan Asghar Shuang Shi Dachuan Jiang Yi Tan.

  17. jingjing tan

    Indian Academy of Sciences (India)

    Home; Journals; Sadhana. JINGJING TAN. Articles written in Sadhana. Volume 43 Issue 4 April 2018 pp 56. Swept blade influence on aerodynamic performance of steam turbine nozzle cascades · ZI-MING FENG JINGJING TAN XIAOLEI LIU CUI WEI · More Details Abstract Fulltext PDF. To improve the aerodynamic ...

  18. wenbo tan

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Genetics. WENBO TAN. Articles written in Journal of Genetics. Volume 97 Issue 1 March 2018 pp 145-155 RESEARCH ARTICLE. Oestrogen regulates the expression of cathepsin E-A-like gene through ERβ in liver of chicken ( Gallus gallus ) · HANG ZHENG HONG LI WENBO TAN CHUNLIN XU ...

  19. Seed treatment for control leaf spot diseases of spring wheat

    Directory of Open Access Journals (Sweden)

    Barbara Krzyzińska

    2012-12-01

    Full Text Available In the years 2001 and 2002 at the Institute of Plant Protection Branch in Sooenicowice research work was performed on seed treatment with fungicides against leaf diseases of spring wheat cv. Ismena caused by pathogenic fungi: Blumeria graminis, Phaeasphaeria nodorum, Puccinia recondita i Pyrenophora tritici-repentis. Two variants of protection were included in the experiment: seed dressing with fungicides or seed dressing and single application of foliar spray at GS 49. At early growth stages of spring wheat a very high biological activity against powdery mildew, septoria leaf spot, brown rust and tan spot was recorded for seed dressing containing triticonazole+prochloraz. In the case of triadimenol+imazalil+fuberidazole only a weak, but long-lasting effect against brown rust and septoria leaf spot was observed. Leaf infection as well as 1000 grain mass and yield, in the experimental combination with using triticonazole+prochloraz were on the same level as in the experimental variant where after seed dressing with triadimenol+imazalil+fuberidazole plots were sprayed with tridemorf+epoxykonazole at GS 49. It was concluded that seed dressing preparation containing triticonazole+prochloraz constituted a good base for protection of spring wheat against foliar diseases.

  20. Tanning Products

    Science.gov (United States)

    ... have become a popular method of maintaining a year-round tan, but their effects can be as dangerous ... Emergency Preparedness International Programs News & Events Training & Continuing Education Inspections & Compliance Federal, State & Local Officials Consumers Health ...

  1. Influence of nitrogen sources on growth and mycotoxin production by isolates of Pyrenophora tritici-repentis from wheat

    Directory of Open Access Journals (Sweden)

    Noureddine Bouras

    2016-04-01

    Full Text Available The fungus Pyrenophora tritici-repentis (Died. Drechs. infects the leaves and kernels of wheat, causing tan spot and red smudge, respectively. Isolates of P. tritici-repentis have been reported to be both phytopathogenic and mycotoxigenic. This research investigates the influence of nitrogen sources on growth and production of mycotoxins by eight different isolates of P. tritici-repentis. A synthetic agar medium (SAM was used with different nitrogen sources, both inorganic [(NH4Cl, NH4NO3 and (NH42SO4] and organic (l-alanine, l-histidine, and l-lysine, at a concentration of 37.5 mmol L− 1. Individual isolates exhibited different growth rates that varied according to the nitrogen source added to the medium. The choice of nitrogen source also had a major effect on production of the mycotoxins emodin, catenarin and islandicin. The highest concentrations of emodin, 54.40 ± 4.46 μg g− 1, 43.07 ± 23.39 μg g− 1 and 28.91 ± 4.64 μg g− 1 of growth medium, were produced on the complex medium (V8-potato dextrose agar by the isolates Alg-H2, 331-2 and TS93-71B, respectively. A relatively high concentration of emodin also was produced by isolates Az35-5 (28.29 ± 4.71 μg g− 1 of medium and TS93-71B (27.03 ± 4.09 μg g− 1 of medium on synthetic medium supplemented with l-alanine. The highest concentrations of catenarin (174.54 ± 14.46 μg g− 1 and 104.87 ± 6.13 μg g− 1 of medium were recorded for isolates TS93-71B and Alg-H2 on synthetic medium supplemented with l-alanine and NH4Cl, respectively. The highest concentration of islandicin (4.64 ± 0.36 μg g− 1 medium was observed for isolate 331-2 in the presence of l-lysine. There was not a close relationship between mycelial growth and mycotoxin production by the fungal isolates. This is the first report on the influence of nitrogen sources on the production of mycotoxins by P. tritici-repentis.

  2. Mating-type locus characterization and variation in Pyrenophora semeniperda

    Science.gov (United States)

    Julie Leanna Henry

    2015-01-01

    Pyrenophora semeniperda is a generalist fungal pathogen that occurs primarily on monocot seed hosts. It is in the phylum Ascomycota, which includes both self-compatible (homothallic) and self-incompatible (heterothallic) species. Homothallic fungal species contain complementary mating-type (MAT) idiomorphs in a single unikaryotic strain, while heterothallic strains...

  3. Tanning (For Teens)

    Science.gov (United States)

    ... sites) to produce melanin . Melanin is the brown pigment that causes tanning. Melanin is the body's way ... pills that claim to speed up the body's production of melanin or darken the skin. There's no ...

  4. Pathotype diversity among Algerian isolates of Pyrenophora teres f. teres

    Directory of Open Access Journals (Sweden)

    Karima BOUNGAB

    2013-01-01

    Full Text Available Barley Net Blotch caused by Pyrenophora teres f. teres (Ptt is one of the most important foliar diseases in north western Algeria. The disease could cause appreciable yield losses under favorable environmental conditions. Studies on pathogen variability and distribution of virulence in Ptt are essential to identify effective sources of resistance to net blotch of barley. In this study, pathogenic variability in 48 isolates of Ptt, collected from different barley-growing areas of north-western Algeria were evaluated using 22 barley genotypes as differential hosts. Trials carried out under controlled conditions confirmed the large variation in the virulence of this fungus. The genotypes exhibited variability in response ranging from complete resistance to high susceptibility. This is the first report of pathogenic variability in Ptt in north western Algeria. The 48 isolates tested were further differentiated into 12 pathotypes according to their reaction on the host. Eight differential cultivars were resistant to all isolates tested, but others were susceptible to one or more of the isolates. The variability in the pathogen and the resistance identified in some genotypes used in this study are being investigated further to develop superior, adapted germplasm for use in barley breeding programs in north western Algeria.

  5. Race structure of Pyrenophora tritici-repentis in Morocco

    Directory of Open Access Journals (Sweden)

    Fernanda M. GAMBA

    2017-05-01

    Full Text Available The virulence of 135 single-spore isolates of Pyrenophora tritici-repentis, collected from durum wheat fields representing most of the major agro-ecological zones of Morocco from 2013 to 2015, was assessed on six international differential wheat genotypes under controlled conditions. Races 1, 5, 6 and 7 were identified with races 5 and 6 being most frequent, representing 47% and 44% of isolates tested, respectively. Only eight isolates (6% collected at two research stations and a farm field near a station in 2014 and 2015 were race 1, while three isolates collected in 2014 in a farm field in north-eastern Morocco were race 7. The uniform race structure in farm fields may be due to overreliance on a limited and narrow genetic base for durum wheat crops in Morocco. However, the identification of four races is significant since P. tritici-repentis can generate new combinations of virulence, thereby increasing race diversity. Combined with the low wheat diversity this may lead to future severe disease epidemics.

  6. Magazine exposure, tanned women stereotypes, and tanning attitudes.

    Science.gov (United States)

    Cho, Hyunyi; Lee, Seungyoon; Wilson, Kari

    2010-09-01

    This study investigated whether magazine exposure is related to stereotypical beliefs about tanned women. A survey of White college women (n=205) assessed their exposure to beauty/fashion and health/fitness magazines. Outcome variables were the beliefs that tanned women are fashionable, fit, and shallow. Attention to the tanned women's images in health magazines positively predicted the belief that tanned women are fit and that tanned women are shallow; in contrast, attention to the images in beauty magazine negatively predicted the belief that tanned women are fit. Number of beauty magazines women read negatively predicted the belief that tanned women are shallow. The belief that tanned women are fit was unrelated, but the belief that tanned women are shallow was negatively related, with tanning attitudes. Copyright © 2010 Elsevier Ltd. All rights reserved.

  7. Is Pyrenophora semeniperda the cause of downy brome (Bromus tectorum) die-offs?

    Science.gov (United States)

    Owen W. Baughman; Susan E. Meyer

    2013-01-01

    Downy brome (cheatgrass) is a highly successful, exotic, winter annual invader in semi-arid western North America, forming near-monocultures across many landscapes. A frequent but poorly understood phenomenon in these heavily invaded areas is periodic 'die-off' or complete stand failure. The fungal pathogen Pyrenophora semeniperda is abundant in cheatgrass...

  8. Effects of Net Blotch ( Pyrenophora teres ) on Malt Barley Yield and ...

    African Journals Online (AJOL)

    Barley (Hordeum vulgare L.) production is constrained by diseases such as net blotch caused by Pyrenophora teres Drechsl. The objectives of this study were to assess the effects of net blotch disease on malt barley yield and grain quality under natural infection. Four malt barley varieties (Beka, HB 120, HB 52 and Holker), ...

  9. Lack of host specialization on winter annual grasses in the fungal seed bank pathogen Pyrenophora semeniperda

    Science.gov (United States)

    Julie Beckstead; Susan E. Meyer; Toby S. Ishizuka; Kelsey M. McEvoy; Craig E. Coleman

    2016-01-01

    Generalist plant pathogens may have wide host ranges, but many exhibit varying degrees of host specialization, with multiple pathogen races that have narrower host ranges. These races are often genetically distinct, with each race causing highest disease incidence on its host of origin. We examined host specialization in the seed pathogen Pyrenophora...

  10. Hydrothermal time models for conidial germination and mycelial growth of the seed pathogen Pyrenophora semeniperda

    Science.gov (United States)

    Connor W. Barth; Susan E. Meyer; Julie Beckstead; Phil S. Allen

    2015-01-01

    Population-based threshold models using hydrothermal time (HTT) have been widely used to model seed germination. We used HTT to model conidial germination and mycelial growth for the seed pathogen Pyrenophora semeniperda in a novel approach to understanding its interactions with host seeds. Germination time courses and mycelial growth rates for P.semeniperda were...

  11. Tacones no tan lejanos

    OpenAIRE

    Saavedra Gil, Melissa

    2011-01-01

    Revista de difusión y agitación cultural. Contiene: Tacones no tan lejanos. *...mujeres trans- en un entorno rabiosamente masculino...* --- Cápsulas de microhistoria para la trans--historia --- De (re) corridos urbanos… Otras tallas de tacones

  12. Risks of Tanning

    Science.gov (United States)

    ... can also be produced by exposure to intense artificial sources of UVC/UVB, like broken mercury vapor lamps, or certain types of tanning lamps. Symptoms: Tearing Pain Swollen eyelids A feeling of sand in the eye Hazy or decreased vision Treatment: Consult your doctor if you have any ...

  13. Photobiological evaluation of tanning booths

    International Nuclear Information System (INIS)

    Nachtwey, D.S.; Rundel, R.D.

    1981-01-01

    The use of tanning booths as a substitute for natural sunlight is becoming increasingly popular. However, unless careful attention is paid to proper design and maintenance, the radiation field inside a tanning booth can be highly anisotropic. The use of simple, inexpensive ultraviolet radiation meters to measure dosage can lead to serious overexposure. Since the ultraviolet radiation inside a tanning booth has a greater proportion of short wavelengths (less than 300 nanometers) than natural sunlight, the amount of skin cancer-inducing radiation received for a tan may be twice that received for a natural suntan

  14. Multiple interkingdom horizontal gene transfers in Pyrenophora and closely related species and their contributions to phytopathogenic lifestyles.

    Directory of Open Access Journals (Sweden)

    Bao-Fa Sun

    Full Text Available Many studies have reported horizontal gene transfer (HGT events from eukaryotes, especially fungi. However, only a few investigations summarized multiple interkingdom HGTs involving important phytopathogenic species of Pyrenophora and few have investigated the genetic contributions of HGTs to fungi. We investigated HGT events in P. teres and P. tritici-repentis and discovered that both species harbored 14 HGT genes derived from bacteria and plants, including 12 HGT genes that occurred in both species. One gene coding a leucine-rich repeat protein was present in both species of Pyrenophora and it may have been transferred from a host plant. The transfer of genes from a host plant to pathogenic fungi has been reported rarely and we discovered the first evidence for this transfer in phytopathogenic Pyrenophora. Two HGTs in Pyrenophora underwent subsequent duplications. Some HGT genes had homologs in a few other fungi, indicating relatively ancient transfer events. Functional analyses indicated that half of the HGT genes encoded extracellular proteins and these may have facilitated the infection of plants by Pyrenophora via interference with plant defense-response and the degradation of plant cell walls. Some other HGT genes appeared to participate in carbohydrate metabolism. Together, these functions implied that HGTs may have led to highly efficient mechanisms of infection as well as the utilization of host carbohydrates. Evolutionary analyses indicated that HGT genes experienced amelioration, purifying selection, and accelerated evolution. These appeared to constitute adaptations to the background genome of the recipient. The discovery of multiple interkingdom HGTs in Pyrenophora, their significance to infection, and their adaptive evolution, provided valuable insights into the evolutionary significance of interkingdom HGTs from multiple donors.

  15. Quantification of conidia produced by Pyrenophora chaetomioides on dead leaves of Avena sativa under field condition

    OpenAIRE

    Rosa, Carlos R. E. da; Martinelli, José A.; Federizzi, Luiz C.; Bocchese, Carla A. C.

    2003-01-01

    Procurou-se quantificar a produção de conídios por Pyrenophora chaetomioides sobre folhas mortas de aveia branca (Avena sativa), e relacionar essas observações com as condições de temperatura e precipitação ocorridas no período. Foram coletadas regularmente folhas mortas da superfície das parcelas experimentais, onde se realizou a contagem dos conídios. Os resultados mostraram que a quantidade de conídios produzidos diminuiu com o atraso na semeadura da cultura. Além disso, a produção de coní...

  16. Mycelial growth rate and toxin production in the seed pathogen Pyrenophora semeniperda: Resource trade-offs and temporally varying selection

    Science.gov (United States)

    S. E. Meyer; M. Masi; S. Clement; T. L. Davis; J. Beckstead

    2015-01-01

    Pyrenophora semeniperda, an important pathogen in Bromus tectorum seed banks in semi-arid western North America, exhibits >4-fold variation in mycelial growth rate. Host seeds exhibit seasonal changes in dormancy that affect the risk of pathogen-caused mortality. The hypothesis tested is that contrasting seed dormancy phenotypes select for contrasting strategies...

  17. Effect of strain and cultural conditions on the production of cytochalasin B by the potential mycoherbicide Pyrenophora semeniperda (Pleosporaceae, Pleosporales)

    Science.gov (United States)

    Marco Masi; Antonio Evidente; Susan Meyer; Joshua Nicholson; Ashley. Munoz

    2014-01-01

    The seed pathogen Pyrenophora semeniperda has demonstrated potential as a mycoherbicidal biocontrol for eliminating persistent seed banks of annual bromes on western North American rangelands. This pathogen exhibits variation in virulence that is related to mycelial growth rate, but direct laboratory tests of virulence on seeds often have low repeatability. We...

  18. Pyrenophoric acid, a phytotoxic sesquiterpenoid penta-2,4-dienoic acid produced by a potential mycoherbicide, Pyrenophora semeniperda

    Science.gov (United States)

    Marco Masi; Susan Meyer; Alessio Cimmino; Anna Andolfi; Antonio Evidente

    2014-01-01

    A new phytotoxic sesquiterpenoid penta-2,4- dienoic acid, named pyrenophoric acid, was isolated from solid wheat seed culture of Pyrenophora semeniperda, a fungal pathogen proposed as a mycoherbicide for biocontrol of cheatgrass (Bromus tectorum) and other annual bromes. These bromes are serious weeds in winter cereals and also on temperate semiarid rangelands....

  19. A seed bank pathogen causes seedborne disease: Pyrenophora semeniperda on undispersed grass seeds in western North America

    Science.gov (United States)

    Susan E. Meyer; Julie Beckstead; Phil S. Allen; Duane C. Smith

    2008-01-01

    The generalist pathogen Pyrenophora semeniperda is abundant in seed banks of the exotic winter annual grass Bromus tectorum in semiarid western North America and is also found in the seed banks of co-occurring native grasses. In this study, we examined natural incidence of disease caused by this pathogen on undispersed host seeds,...

  20. Strategies to Reduce Indoor Tanning

    Science.gov (United States)

    Holman, Dawn M.; Fox, Kathleen A.; Glenn, Jeffrey D.; Guy, Gery P.; Watson, Meg; Baker, Katie; Cokkinides, Vilma; Gottlieb, Mark; Lazovich, DeAnn; Perna, Frank M.; Sampson, Blake P.; Seidenberg, Andrew B.; Sinclair, Craig; Geller, Alan C.

    2015-01-01

    Exposure to ultraviolet radiation from indoor tanning device use is associated with an increased risk of skin cancer, including risk of malignant melanoma, and is an urgent public health problem. By reducing indoor tanning, future cases of skin cancer could be prevented, along with the associated morbidity, mortality, and healthcare costs. On August 20, 2012, the CDC hosted a meeting to discuss the current body of evidence on strategies to reduce indoor tanning as well as research gaps. Using the Action Model to Achieve Healthy People 2020 Overarching Goals as a framework, the current paper provides highlights on the topics that were discussed, including (1) the state of the evidence on strategies to reduce indoor tanning; (2) the tools necessary to effectively assess, monitor, and evaluate the short- and long-term impact of interventions designed to reduce indoor tanning; and (3) strategies to align efforts at the national, state, and local levels through transdisciplinary collaboration and coordination across multiple sectors. Although many challenges and barriers exist, a coordinated, multilevel, transdisciplinary approach has the potential to reduce indoor tanning and prevent future cases of skin cancer. PMID:23683986

  1. Genetic differentiation in Pyrenophora teres f. teres populations from Syria and Tunisia as assessed by AFLP markers.

    Science.gov (United States)

    Bouajila, A; Zoghlami, N; Murad, S; Baum, M; Ghorbel, A; Nazari, K

    2013-06-01

    To investigate the level of genetic differentiation and diversity among Pyrenophora teres isolate populations originating from different agro-ecological areas of Syria and Tunisia and to determine the potential of AFLP profiling in genotyping Pyrenophora teres f. teres. In this study, AFLP markers have been employed to identify patterns of population structure in 20 Pyrenophora teres f. teres populations from Syria and Tunisia. Ninety-four isolates were studied by the use of a protocol that involved stringent PCR amplification of fragments derived from digestion of genomic DNA with restriction enzymes EcoRI and MesI. Based on 401 amplified polymorphic DNA markers (AFLP), variance analyses indicated that most of the variation was partitioned within rather than between populations. Genotypic diversity (GD) was high for populations from Rihane, local landraces and different agro-ecological zones (GD = 0·75-0·86). There was high genetic differentiation among pathogen populations from different host populations in Syria (Gst  = 0·31, ht = 0·190) and Tunisia (Gst  = 0·39, ht = 0·263), which may be partly explained by the low gene flow around the areas sampled. A phenetic tree revealed three groups with high bootstrap values (55, 68, 76) and reflected the grouping of isolates based on host, or agro-ecological areas. AFLP profiling is an effective method for typing the genetically diverse pathogen Pyrenophora teres f. teres. The study represents a comparative analysis of the genetic diversity in P. teres isolates from two countries spanning two continents and also shows that several distinct P. teres genotypes may be found in a given environment. The implications of these findings for Pyrenophora teres f. teres evolutionary potential and net blotch-resistance breeding in Syria and Tunisia were also discussed. © 2012 The Society for Applied Microbiology.

  2. Indoor Tanning Is Not Safe

    Science.gov (United States)

    ... also can cause cataracts and cancers of the eye (ocular melanoma). UV exposure from the sun and from indoor ... increase your risk of getting skin cancer, including melanoma. Indoor tanning ... potentially blinding eye diseases, if eye protection is not used. Facts ...

  3. Internet advertising of artificial tanning in Australia.

    Science.gov (United States)

    Team, Victoria; Markovic, Milica

    2006-08-01

    Artificial tanning, defined as deliberate exposure to ultraviolet rays produced by artificial tanning devices, is a new and emerging public health issue in Australia and globally. Epidemiological research suggests that artificial tanning may contribute to the incidence of melanoma, nonmelanoma skin cancer as well as other health problems. Given that Australia has a high incidence of skin cancer, we have undertaken a study to explore how artificial tanning has been promoted to its users. The aim was to analyze the completeness and accuracy of information about artificial tanning. A content analysis of web sites of tanning salons and distributors of tanning equipment in Australia was conducted. A total of 22 web sites were analyzed. None of the solarium operators or distributors of equipment provided full information about the risks of artificial tanning. Fifty-nine percent of web advertisements had no information and 41% provided only partial information regarding the risks of artificial tanning. Pictures with the image of bronze-tanned bodies, predominantly women, were used by all web advertisers. In light of the success of sun-safety campaigns in Australia, the findings of future epidemiological research on the prevalence of artificial tanning and sociological and anthropological research on why people utilize artificial tanning should be a basis for developing effective targeted health promotion on the elimination of artificial tanning in the country.

  4. Ultraviolet radiation, sun and tanning salons

    CERN Document Server

    1999-01-01

    The pamphlet gives some information about ultraviolet radiation (UV), UV-sources and health effects, tanning in artificial and natural sun. It also includes some sun protection advice. It is intended mainly for persons inspecting artificial tanning units and for the owners of tanning salons. (Author)

  5. Getting a Base Tan: Does it Prevent Sunburn?

    Science.gov (United States)

    Tanning: Does a base tan prevent sunburn? Should I go to a tanning salon before a sunny vacation to help prevent sunburn? Answers ... little evidence to support the idea that a base tan protects you against sunburn. A few sessions ...

  6. Toward quantifying the abuse liability of ultraviolet tanning: A behavioral economic approach to tanning addiction.

    Science.gov (United States)

    Reed, Derek D; Kaplan, Brent A; Becirevic, Amel; Roma, Peter G; Hursh, Steven R

    2016-07-01

    Many adults engage in ultraviolet indoor tanning despite evidence of its association with skin cancer. The constellation of behaviors associated with ultraviolet indoor tanning is analogous to that in other behavioral addictions. Despite a growing literature on ultraviolet indoor tanning as an addiction, there remains no consensus on how to identify ultraviolet indoor tanning addictive tendencies. The purpose of the present study was to translate a behavioral economic task more commonly used in substance abuse to quantify the "abuse liability" of ultraviolet indoor tanning, establish construct validity, and determine convergent validity with the most commonly used diagnostic tools for ultraviolet indoor tanning addiction (i.e., mCAGE and mDSM-IV-TR). We conducted a between-groups study using a novel hypothetical Tanning Purchase Task to quantify intensity and elasticity of ultraviolet indoor tanning demand and permit statistical comparisons with the mCAGE and mDSM-IV-TR. Results suggest that behavioral economic demand is related to ultraviolet indoor tanning addiction status and adequately discriminates between potential addicted individuals from nonaddicted individuals. Moreover, we provide evidence that the Tanning Purchase Task renders behavioral economic indicators that are relevant to public health research. The present findings are limited to two ultraviolet indoor tanning addiction tools and a relatively small sample of high-risk ultraviolet indoor tanning users; however, these pilot data demonstrate the potential for behavioral economic assessment tools as diagnostic and research aids in ultraviolet indoor tanning addiction studies. © 2016 Society for the Experimental Analysis of Behavior.

  7. [What nosographic framework for excessive tanning?].

    Science.gov (United States)

    Petit, A; Karila, L; Lejoyeux, M

    2014-04-01

    Socially valorised tanning, like other forms of behaviour, can take on an addictive aspect. Excessive tanning, defined by the presence of impulsivity and repetition of tanning that leads to personal distress, is a psychiatric disorder that has only recently been recognized. This finding is based on the observations of many dermatologists who report an addictive relationship in their patients with tanning cabins despite announcement of the diagnosis of malignant melanoma. This article attempts to synthesize the existing literature on excessive tanning and addiction to investigate possible associations. This review focuses on the prevalence, clinical features, aetiology, and treatment of this disorder. The literature review was conducted from 1983 to 2012, using PubMed, Google Scholar, EMBASE, and PsycInfo, using the following keywords alone or combined: Tanning, Addiction, Sunbeds, Skin cancer prevention, and Treatment. We investigated different models to determine how excessive tanning met these criteria. Excessive Tanning was described in the 2000s by an American dermatologist, Carolyn Heckman. Wartham et al. were the first to have proposed a theoretical framework for addiction to sunbathing, as well as two scales (m CAGE and m DSM IV) for the diagnosis and to assess the degree of addiction. These diagnostic criteria describe the craving like-symptoms, the feeling of losing control, or the continuation of the behavior despite knowledge of negative consequences. Excessive Tanning is not present in the classifications of the DSM or ICD, but may be related to Addiction, Obsessive-Compulsive Disorder, Impulse control disorders, Anorexia, or Body Dysmorphic Disorder. Excessive tanning can be included in the spectrum of behavioural addictions due its clinical characteristics in common with classics addictive disorders. They are a variety of other models, which may offer an explanation for or insight into tanning behaviour. Further studies must be controlled, notably on

  8. Tanning and beauty: Mother and teenage daughters in discussion.

    Science.gov (United States)

    Hay, Jennifer L; Geller, Alan C; Schoenhammer, Maria; Gordon, Mallorie; Bishop, Marilyn; Shuk, Elyse; Oliveria, Susan; Halpern, Allan C

    2016-07-01

    Tanning increases dramatically through the teenage years, but the family context of this health risk behavior is relatively unstudied. We conducted videotaped conversations between teenage girls (10th and 11th grade) and their mothers. We developed a coding system for discussion content and highlight findings including inadequate knowledge concerning the harms of tanning and positive views of outdoor tanning over indoor tanning, yet agreement that all tans are attractive. Many teens believed that indoor tanning is sometimes necessary to achieve the tanned look. These findings can usefully guide intervention development regarding the harms of all tanning, rather than indoor or outdoor tanning specifically. © The Author(s) 2014.

  9. Spirostaphylotrichin W, a spirocyclic γ-lactam isolated from liquid culture of Pyrenophora semeniperda, a potential mycoherbicide for cheatgrass (Bromus tectorum) biocontrol

    Science.gov (United States)

    Marco Masia; Susan Meyer; Suzette Clement; Anna Andolfi; Alessio Cimmino; Antonio. Evidente

    2014-01-01

    A novel spirocyclic γ-lactam, named spirostaphylotrichin W (1), was isolated together with the well known and closely related spirostaphylotrichins A, C, D, R and V, as well as triticone E, from the liquid cultures of Pyrenophora semeniperda (anamorph: Drechslera), a seed pathogen proposed for cheatgrass (Bromus tectorum) biocontrol. Spirostaphylotrichin W was...

  10. 7 CFR 29.3066 - Tan color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Tan color. 29.3066 Section 29.3066 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Tan color. A light red-yellow. [24 FR 8771, Oct. 29, 1959. Redesignated at 47 FR 51722, Nov. 17, 1982...

  11. Optimization of UV exposure schedules for tanning

    NARCIS (Netherlands)

    Miller, S.A.

    2016-01-01

    The main source of human exposure to ultraviolet radiation (UVR) is the sun, but almost 1,000,000 individuals pursue indoor tanning in the US every day. The U.S. Food and Drug Administration published regulations for indoor tanning devices in 1979 (updated in 1985). The manufacturer is required to

  12. Emergence of succinate dehydrogenase inhibitor resistance of Pyrenophora teres in Europe.

    Science.gov (United States)

    Rehfus, Alexandra; Miessner, Simone; Achenbach, Janosch; Strobel, Dieter; Bryson, Rosie; Stammler, Gerd

    2016-10-01

    Net blotch caused by Pyrenophora teres is an important disease of barley worldwide. In addition to strobilurins (quinone ouside inhibitors) and azoles (demethylation inhibitors), succinate dehydrogenase inhibitors (SDHIs) are very effective fungicides for net blotch control. Recently, SDHI-resistant isolates have been found in the field. Intensive sensitivity monitoring programmes across Europe were carried out to investigate the situation concerning SDHI resistance in P. teres. The first isolates with a lower sensitivity to SDHIs registered in barley were found in Germany in 2012 and carried the B-H277Y substitution in the succinate dehydrogenase enzyme. In 2013 and 2014, a significant increase in isolates with lower SDHI sensitivity was detected mainly in France and Germany, and the range of target-site mutations increased. Most of the resistant isolates carried the C-G79R substitution, which exhibits a strong impact on all SDHIs in microtitre tests. All SDHIs tested were shown to be cross-resistant. Other substitutions are gaining in importance, e.g. C-N75S in France and D-D145G in Germany. So far, no double mutants in SDH genes have been detected. Glasshouse tests showed that SDHI-resistant isolates were still controlled by the SDHI fluxapyroxad when applied preventively. To date, most isolates with C-G79R substitution have not simultaneously carried the F129L change in cytochrome b, which causes resistance towards QoI fungicides at low to moderate levels. Several target-site mutations in the genes of subunits SDH-B, SDH-C and SDH-D with different impact on SDHI fungicides were detected. The pattern of mutations varied from year to year and between different regions. Strict resistance management strategies are recommended to maintain SDHIs as effective tools for net blotch control, especially in areas with low frequencies of resistant isolates. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  13. Postdispersal Infection and Disease Development of Pyrenophora semeniperda in Bromus tectorum Seeds.

    Science.gov (United States)

    Finch-Boekweg, Heather; Gardner, John S; Allen, Phil S; Geary, Brad

    2016-03-01

    The Ascomycete fungus, Pyrenophora semeniperda, attacks a broad range of cool-season grasses. While leaf and predispersal infection of seeds (i.e., florets containing caryopses) have been previously characterized, little is known about the pathogenesis of mature seeds following dispersal. In this study, we examined infection and disease development of P. semeniperda on dormant seeds of Bromus tectorum. Inoculated seeds were hydrated at 20°C for up to 28 days. Disease development was characterized using scanning electron and light microscopy. P. semeniperda conidia germinated on the seed surface within 5 to 8 h. Hyphae grew on the seed surface and produced extracellular mucilage that eventually covered the seed. Appressoria formed on the ends of hyphae and penetrated through the lemma and palea, stomatal openings, and broken trichomes. The fungus then catabolized the endosperm, resulting in a visible cavity by 8 days. Pathogenesis of the embryo was associated with progressive loss of cell integrity and proliferation of mycelium. Beginning at approximately day 11, one to several stromata (approximately 150 μm in diameter and up to 4 mm in length) emerged through the lemma and palea. Degradation of embryo tissue was completed near 14 days. Conidiophores produced conidia between 21 and 28 days and often exhibited "Y-shaped" branching. This characterization of disease development corrects previous reports which concluded that P. semeniperda is only a weak seed pathogen with infection limited to the outermost seed tissues. In addition, the time required for disease development explains why infected dormant or slow-germinating seeds are most likely to experience mortality.

  14. Indoor tanning promotions on social media in six US cities #UVTanning #tanning.

    Science.gov (United States)

    Ricklefs, Christine A; Asdigian, Nancy L; Kalra, Heidi L; Mayer, Joni A; Dellavalle, Robert P; Holman, Dawn M; Crane, Lori A

    2016-06-01

    There is no research investigating indoor tanning advertising on social media. We assessed the use of social media to promote indoor tanning. We subscribed to social media platforms in six US cities and content-analyzed promotional messages received. We captured 662 messages on Twitter and Facebook, through salon emails, and in daily deal coupons. Salon postings were most frequent on Twitter and Facebook, with an average of 2-3 postings per week. National chains posted more frequently than local businesses. Forty percent of messages were devoid of tanning content and included photos, jokes, or popular references. Thirty percent mentioned price reductions, and 28 % referenced an upcoming holiday. Sunless tanning (17 %) was promoted more often than ultraviolet tanning (9 %). Tanning salons actively use social media as a strategy for maintaining relationships with customers and offer pricing deals that promote loyalty and high-frequency tanning.

  15. Age Spots

    Science.gov (United States)

    ... for Every Season How to Choose the Best Skin Care Products In This Section Dermatologic Surgery What is dermatologic ... for Every Season How to Choose the Best Skin Care Products Age Spots Treatment Options Learn more about treatment ...

  16. Phenomenology and psychopathology of excessive indoor tanning.

    Science.gov (United States)

    Petit, Aymeric; Karila, Laurent; Chalmin, Florence; Lejoyeux, Michel

    2014-06-01

    Excessive indoor tanning, defined by the presence of an impulse towards and repetition of tanning that leads to personal distress, has only recently been recognized as a psychiatric disorder. This finding is based on the observations of many dermatologists who report the presence of addictive relationships with tanning salons among their patients despite being given diagnoses of malignant melanoma. This article synthesizes the existing literature on excessive indoor tanning and addiction to investigate possible associations. This review focuses on the prevalence, clinical features, etiology, and treatment of this disorder. A literature review was conducted, using PubMed, Google Scholar, EMBASE and PsycINFO, to identify articles published in English from 1974 to 2013. Excessive indoor tanning may be related to addiction, obsessive-compulsive disorder, impulse control disorder, seasonal affective disorder, anorexia, body dysmorphic disorder, or depression. Excessive indoor tanning can be included in the spectrum of addictive behavior because it has clinical characteristics in common with those of classic addictive disorders. It is frequently associated with anxiety, eating disorders, and tobacco dependence. Further controlled studies are required, especially in clinical psychopathology and neurobiology, to improve our understanding of excessive indoor tanning. © 2014 The International Society of Dermatology.

  17. Diminishing Chromium Use on Combined Chromium-Gambier Tanning Process Upon the Characteristics of Tanned Leather

    Directory of Open Access Journals (Sweden)

    A. Kasim

    2014-04-01

    Full Text Available The research was aimed to investigate the influence of minimizing chromium use on combined chromium-gambier process upon the characteristics of tanned leather. At the first stage of tanning process, chromium was used and in the second stage it was replaced by gambier. The raw material used was dried saline-preserved goat skin. The treatments applied on the tanning process were the different concentrations of chromium ranging from the highest level of 6% to the lowest level of 1% which was then re-tanned by using 8% concentration of gambier. The examination parameters included chemical and physical properties as well as visual investigation on the tanned leather in accordance with SNI-06-0463-1989-A. The result showed that the tanning process by using 2% chromium in the first step and 8% gambier in the second step was a treatment combination producing tanned leather that met the standard. The examination on tanned leather resulted from such treatment showed 56.33% rawhide, 17.45% of bound tannin, 31.22% of tanning level, tensile strength 386.30 kg/cm2, flexibility 31.91%, leather width 1.3 mm, density 0.75 g/cm3, the leather was quite elastic with light brownish color. In conclusion, minimizing the use of chromium in the combined tanning process of chromium and gambier can be implemented to the lowest of 2% chromium concentration and 8% gambier in the first and second step, respectively.

  18. Tanning Salon Compliance Rates in States With Legislation to Protect Youth Access to UV Tanning.

    Science.gov (United States)

    Williams, Melissa S; Buhalog, Brittany; Blumenthal, Laura; Stratman, Erik J

    2018-01-01

    The US Food and Drug Administration has classified tanning beds as carcinogenic. Most states have enacted legislation to prevent or create barriers for minors accessing tanning establishments. Determining tanning salon compliance with legislation would provide an indication of the influence of legislation at preventing exposure to the carcinogen in minors. To investigate compliance rates in the 42 states and the District of Columbia with legislation restricting tanning bed use in minors and to identify differences in compliance based on population, regional location, salon ownership, age group being regulated, and time since the law was enacted. This investigation was a cross-sectional telephone survey conducted between February 1, 2015, and April 30, 2016, by callers posing as minors attempting to schedule a tanning appointment. The setting was tanning salons in the 42 states and the District of Columbia that currently have legislation restricting tanning bed use in minors. Included in the study were 427 tanning salons, 10 randomly selected from each state or territory with tanning legislation. Overall compliance of tanning salons with state tanning legislation and differences in compliance based on community population, regional location, independent vs chain tanning salon, age group being regulated, and time since the law was enacted. Of the 427 tanning salons surveyed, overall noncompliance with state legislation was 37.2% (n = 159). There were more noncompliant tanning salons in rural locations (45.5%; 95% CI, 37.5%-53.7%; P = .009), southern regions of the United States (49.4%; 95% CI, 41.4%-57.4%; P = .001), independently owned salons (43.9%; 95% CI, 37.3%-50.6%; P = .003), states with younger age groups being regulated (53.5%; 95% CI, 45.7%-61.2%; P legislation aimed at limiting tanning bed use among US minors is unsatisfactory, indicating that additional efforts to enforce the laws and education of the harmful effects of UV tanning are

  19. SPOT Program

    Science.gov (United States)

    Smith, Jason T.; Welsh, Sam J.; Farinetti, Antonio L.; Wegner, Tim; Blakeslee, James; Deboeck, Toni F.; Dyer, Daniel; Corley, Bryan M.; Ollivierre, Jarmaine; Kramer, Leonard; hide

    2010-01-01

    A Spacecraft Position Optimal Tracking (SPOT) program was developed to process Global Positioning System (GPS) data, sent via telemetry from a spacecraft, to generate accurate navigation estimates of the vehicle position and velocity (state vector) using a Kalman filter. This program uses the GPS onboard receiver measurements to sequentially calculate the vehicle state vectors and provide this information to ground flight controllers. It is the first real-time ground-based shuttle navigation application using onboard sensors. The program is compact, portable, self-contained, and can run on a variety of UNIX or Linux computers. The program has a modular objec-toriented design that supports application-specific plugins such as data corruption remediation pre-processing and remote graphics display. The Kalman filter is extensible to additional sensor types or force models. The Kalman filter design is also strong against data dropouts because it uses physical models from state and covariance propagation in the absence of data. The design of this program separates the functionalities of SPOT into six different executable processes. This allows for the individual processes to be connected in an a la carte manner, making the feature set and executable complexity of SPOT adaptable to the needs of the user. Also, these processes need not be executed on the same workstation. This allows for communications between SPOT processes executing on the same Local Area Network (LAN). Thus, SPOT can be executed in a distributed sense with the capability for a team of flight controllers to efficiently share the same trajectory information currently being computed by the program. SPOT is used in the Mission Control Center (MCC) for Space Shuttle Program (SSP) and International Space Station Program (ISSP) operations, and can also be used as a post -flight analysis tool. It is primarily used for situational awareness, and for contingency situations.

  20. Indoor Tanning: The Risks of Ultraviolet Rays

    Science.gov (United States)

    ... damage, which can lead to skin cancer in laboratory animals and humans; and The risk of melanoma of the skin increasing by 75 percent when tanning bed use started before age 35. IARC’s review had some ...

  1. GCN/TAN: A Status Report

    Science.gov (United States)

    Barthelmy, Scott

    2015-04-01

    The Gamma-ray Coordinates Network / Transient Astronomy Network (GCN/TAN) is your one-stop shopping place for all transient astronomy. It collects nearly all the astrophysical transients from the missions (space-based and ground-based), puts them into a standard format, and distributes them to whomever wishes to receive them. This is all done autonomously (completely autonomous within GCN/TAN, and almost always autonomously within the producer end of operations). This automation means minimal time delays (dependant on the internet email protocol and the number of hops (both of which are out of the control of GCN/TAN). A status report on the current set of sources of transient information, plus recently-added and soon-to-be-added source will be given. Also, a standing request for GCN/TAN to incorporate your transient data stream; plus instruction for customers to receive GCN/TAAN Notice and Circular information.

  2. Dark Spots

    Science.gov (United States)

    2006-01-01

    Dark spots (left) and 'fans' appear to scribble dusty hieroglyphics on top of the Martian south polar cap in two high-resolution Mars Global Surveyor, Mars Orbiter Camera images taken in southern spring. Each image is about 3-kilometers wide (2-miles).

  3. Molecular cloning and characterization of a ToxA-like gene from the maize pathogen Cochliobolus heterostrophus

    Science.gov (United States)

    ToxA, the first discovered fungal proteinaceous host-selective toxin, was originally identified from the tan spot fungus Pyrenophora tritici-repentis (Ptr). Homologues of the PtrToxA gene have not been identified from any other ascomycetes except the leaf/glume blotch fungus Stagonospora nodorum, w...

  4. Cognitive rationalizations for tanning-bed use: a preliminary exploration.

    Science.gov (United States)

    Banerjee, Smita C; Hay, Jennifer L; Greene, Kathryn

    2013-09-01

    To examine construct and predictive utility of an adapted cognitive rationalization scale for tanning-bed use. Current/former tanning-bedusing undergraduate students (N = 216; 87.6% females; 78.4% white) at a large northeastern university participated in a survey. A cognitive rationalization for tanning-bed use scale was adapted. Standardized self-report measures of past tanning-bed use, advantages of tanning, perceived vulnerability to photoaging, tanning-bed use dependence, and tanning-bed use intention were also administered. The cognitive rationalization scale exhibited strong construct and predictive validity. Current tanners and tanning-bed-use-dependent participants endorsed rationalizations more strongly than did former tanners and not-tanning-bed-use-dependent participants respectively. Findings indicate that cognitive rationalizations help explain discrepancy between inconsistent cognitions.

  5. Applicative chemistry of tanning metallic heterocomplexes

    CERN Document Server

    Gaidau, Carmen

    2013-01-01

    The chemistry of heterocomplex compounds is a fascinating field for experts in chemical synthesis and structural analysis, and for technologists specializing in leather processing. This volume describes the vast theoretical and practical possibilities of exploiting the action synergism of metals with different collagen cross-linking capacity. The possibility of reducing chromium content from leather tanning agents by replacing it with other tanning metals has significant environmental implications and minimum changes in terms of quality and production costs of natural leather, and is a viable

  6. Mongolian spots

    Directory of Open Access Journals (Sweden)

    Divya Gupta

    2013-01-01

    Full Text Available Mongolian spots (MS are birthmarks that are present at birth and their most common location is sacrococcygeal or lumbar area. Lesions may be single or multiple and usually involve < 5% total body surface area. They are macular and round, oval or irregular in shape. The color varies from blue to greenish, gray, black or a combination of any of the above. The size varies from few to more than 20 centimetres. Pigmentation is most intense at the age of one year and gradually fades thereafter. It is rarely seen after the age of 6 years. Aberrant MS over occiput, temple, mandibular area, shoulders and limbs may be confused with other dermal melanocytoses and bruises secondary to child abuse, thus necessitating documentation at birth. Although regarded as benign, recent data suggest that MS may be associated with inborn errors of metabolism and neurocristopathies. Mongolian spots usually resolve by early childhood and hence no treatment is generally needed if they are located in the sacral area. However, sometimes it may be required for extrasacral lesions for cosmesis.

  7. UV Tanning Equipment | Radiation Protection | US EPA

    Science.gov (United States)

    2017-08-07

    Sun lamps and tanning equipment emit ultraviolet (UV) rays. People who are exposed to UV rays over a long period of time are more likely to develop skin cancer. People with light skin are in more danger because their skin is more sensitive to UV rays.

  8. UV tanning advertisements in national high school newspapers.

    Science.gov (United States)

    Lofgreen, Seth J; Domozych, Renee; Doctor, Monica; Reimer, Christine; Self, Alyssa; Dellavalle, Robert P

    2017-04-15

    Many young adults have utilized indoor ultraviolet(UV) tanning, putting them at higher risk for development of skin cancers. Prior to the increased regulations on indoor tanning for minors, indoor tanning businesses marketed to teens through modalities such as advertisements in high school newspapers. The purpose of this study was to quantify tanning advertisements in high school newspapers published across the United States between August 2014 and July 2015. Online versions of the newspaper issues were available on issuu.com. Tanning advertisements appeared in 3 of 23 high school newspapers with advertisements of any kind(13%). Among all newspapers with advertisements, 10% were indoor tanning advertisements. One newspaper in Colorado contained advertisements of any kind and had 0 tanning advertisements. A prior study of Colorado high schools showed 11 of 23 schools (48%) to contain tanning advertisements. This suggests that there may be a decrease in indoor UV tanning advertisements owing to increased tanning regulation by state legislatures, national attention to UV tanning, or a general decrease in high school tanning advertisements.

  9. Ultrasound assisted chrome tanning: Towards a clean leather production technology.

    Science.gov (United States)

    Mengistie, Embialle; Smets, Ilse; Van Gerven, Tom

    2016-09-01

    Nowadays, there is a growing demand for a cleaner, but still effective alternative for production processes like in the leather industry. Ultrasound (US) assisted processing of leather might be promising in this sense. In the present paper, the use of US in the conventional chrome tanning process has been studied at different pH, temperature, tanning time, chrome dose and US exposure time by exposing the skin before tanning and during tanning operation. Both prior exposure of the skin to US and US during tanning improves the chrome uptake and reduces the shrinkage significantly. Prior exposure of the skin to US increase the chrome uptake by 13.8% or reduces the chrome dose from 8% to 5% (% based on skin weight) and shorten the process time by half while US during tanning increases the chrome uptake by 28.5% or reduces the chrome dose from 8% to 4% (half) and the tanning time to one third compared to the control without US. Concomitantly, the resulting leather quality (measured as skin shrinkage) improved from 5.2% to 3.2% shrinkage in the skin exposed to US prior tanning and to 1.3% in the skin exposed to US during the tanning experiment. This study confirms that US chrome tanning is an effective and eco-friendly tanning process which can produce a better quality leather product in a shorter process time with a lower chromium dose. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Pollution and energy management in tanning industry

    International Nuclear Information System (INIS)

    Zaman, N.U.

    2005-01-01

    Tanning industry uses a number of chemicals such as Common Salt, Lime (Calcium Hydroxide), Sodium Sulfide and Basic Chromium Sulfate etc. During process, only a part of the chemical is consumed and the rest ends up in the effluent as pollutant. This paper deals with the techniques, locally developed or published in literature to recycle these chemicals and also discusses some energy saving techniques which can be used in tanning industry. Basic Chromium Sulfate (BCS) is one of the expensive chemicals used in 'Chrome Tanning'. By precipitating d filtering basic chromium sulfate, the recovery is nearly complete and the effluent obtained contains less than 1ppm Chromium. Dried raw hides contain up to 15% sodium chloride (w/w) and this can be removed in solid form by using mechanical brushes and can be re-used. The recovered salt contains foreign matter as impurities. After dissolution in water, the salt solution is filtered through cartridge filters and can be used in pickle bath. Liming slurry containing sodium sulfide is wasted as it contains fleshing and hair etc. A self cleaning 'J' type screen has no moving parts and removes fleshing and hair from the lime suspension. 'Counter Current Washing Technique,' reduces the wash water quantity by a factor of five to six. Air born pollution generated during buffing and dyeing can be captured by properly designed air filters. The solvents released in atmosphere during dyeing and finishing can be recovered by absorption. Fat, gelatin and protein can be recovered from waste fleshing. In tanning industry, drying of hides is the major consumer of thermal energy. Hot air can be produced by steam, hot water or solar energy. Advantages and disadvantages of these options are discussed. Wastage of thermal energy in dryers can be reduced by improving the existing designs. Hot water for tanning purposes can be generated by recovering waste heat present in the boiler flue gases. Boiler efficiency can also be improved by cycling heat

  11. UV tanning advertisements in national high school newspapers

    OpenAIRE

    Lofgreen, Seth J; Domozych, Renee; Doctor, Monica; Reimer, Christine; Self, Alyssa; Dellavalle, Robert P

    2017-01-01

    Many young adults have utilized indoor ultraviolet(UV) tanning, putting them at higher risk fordevelopment of skin cancers. Prior to the increasedregulations on indoor tanning for minors, indoortanning businesses marketed to teens throughmodalities such as advertisements in high schoolnewspapers. The purpose of this study was toquantify tanning advertisements in high schoolnewspapers published across the United Statesbetween August 2014 and July 2015. Online versionsof the newspaper issues we...

  12. Modeling of TAN in recirculating aquaculture systems by AQUASIM

    DEFF Research Database (Denmark)

    Arvin, Erik; Pedersen, Lars-Flemming

    2011-01-01

    Modeling of total ammonium nitrogen (TAN) in recirculating aquaculture systems (RAS) contribute to identifying and quantifying the most important processes and their relative contribution to removal of TAN. AQUASIM is a flexible modular simulation system for water quality in natural and technical...... systems developed by EAWAG (Reichert, 1994). AQUASIM allows simulating complex biological, chemical and physical processes in standardized hydraulic systems. We used AQUASIM to model the steady state TAN concentrations in 12 experimental recirculating aquaculture systems (RAS) operated by DTU AQUA...

  13. SpotADAPT

    DEFF Research Database (Denmark)

    Kaulakiene, Dalia; Thomsen, Christian; Pedersen, Torben Bach

    2015-01-01

    by Amazon Web Services (AWS). The users aiming for the spot market are presented with many instance types placed in multiple datacenters in the world, and thus it is difficult to choose the optimal deployment. In this paper, we propose the framework SpotADAPT (Spot-Aware (re-)Deployment of Analytical...... execution within boundaries). Moreover, during the execution of the workload, SpotADAPT suggests a redeployment if the current spot instance gets terminated by Amazon or a better deployment becomes possible due to fluctuations of the spot prices. The approach is evaluated using the actual execution times...

  14. 75 FR 33740 - Indoor Tanning Services; Cosmetic Services; Excise Taxes

    Science.gov (United States)

    2010-06-15

    ... Internal Revenue Service 26 CFR Parts 40 and 49 RIN 1545-BJ40 Indoor Tanning Services; Cosmetic Services... follows: Sec. 49.0-3 Introduction; cosmetic services. [The text of this proposed Sec. 49.0-3 is the same.... Subpart G is added to read as follows: Subpart G--Cosmetic Services Sec. 49.5000B-1 Indoor tanning...

  15. 75 FR 33683 - Indoor Tanning Services; Cosmetic Services; Excise Taxes

    Science.gov (United States)

    2010-06-15

    ... offered with other goods and services, as described in Sec. 49.5000B- 1T(d)(2). An agency may not conduct... payment for indoor tanning services. (c) Definitions--(1) Indoor tanning service means a service employing...); (ii) Sleep disorders; (iii) Seasonal affective disorder or other psychiatric disorder; (iv) Neonatal...

  16. Watching reality television beauty shows is associated with tanning lamp use and outdoor tanning among college students.

    Science.gov (United States)

    Fogel, Joshua; Krausz, Faye

    2013-05-01

    Ultraviolet radiation exposure through natural sunlight or tanning lamps is a risk factor for skin cancer. As the media can influence behavior, we studied whether watching reality television (TV) beauty shows is associated with tanning lamp use or outdoor tanning. College students (n = 576) were surveyed on their reality TV beauty show watching, their use of tanning lamps, and outdoor tanning behavior. We asked media attitude questions about connectivity with reality TV shows and Internet use of Facebook to discuss reality TV shows. Those who did versus did not watch reality TV beauty shows used tanning lamps (12.9% vs 3.7%, P watching reality TV beauty shows (odds ratio [OR] 2.58, 95% confidence interval [CI] 1.11-6.00), increasing age (OR 1.17, 95% CI 1.04-1.32), and female sex (OR 10.16, 95% CI 3.29-31.41). Significant predictors of outdoor tanning included watching reality TV beauty shows (OR 2.11, 95% CI 1.33-3.34). The specific names of the reality TV beauty shows watched were not obtained and therefore we cannot determine if particular shows were more or less associated with this behavior. Watching reality TV beauty shows is associated with both tanning lamp use and outdoor tanning. Dermatologists should consider discussing the potential harmful aspects of tanning beds and outdoor tanning, especially with their patients who watch reality TV beauty shows. Copyright © 2012 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  17. Does the Portrayal of Tanning in Australian Women's Magazines Relate to Real Women's Tanning Beliefs and Behavior?

    Science.gov (United States)

    Dixon, Helen G.; Warne, Charles D.; Scully, Maree L.; Wakefield, Melanie A.; Dobbinson, Suzanne J.

    2011-01-01

    Content analysis data on the tans of 4,422 female Caucasian models sampled from spring and summer magazine issues were combined with readership data to generate indices of potential exposure to social modeling of tanning via popular women's magazines over a 15-year period (1987 to 2002). Associations between these indices and cross-sectional…

  18. The deceptive nature of UVA-tanning versus the modest protective effects of UVB-tanning on human skin

    Science.gov (United States)

    Miyamura, Yoshinori; Coelho, Sergio G.; Schlenz, Kathrin; Batzer, Jan; Smuda, Christoph; Choi, Wonseon; Brenner, Michaela; Passeron, Thierry; Zhang, Guofeng; Kolbe, Ludger; Wolber, Rainer; Hearing, Vincent J.

    2010-01-01

    Summary The relationship between human skin pigmentation and protection from ultraviolet (UV) radiation is an important element underlying differences in skin carcinogenesis rates. The association between UV damage and the risk of skin cancer is clear, yet a strategic balance in exposure to UV needs to be met. Dark skin is protected from UV-induced DNA damage significantly more than light skin due to the constitutively higher pigmentation but an as yet unresolved and important question is what photoprotective benefit, if any, is afforded by facultative pigmentation (i.e. a tan induced by UV exposure). To address that and to compare the effects of various wavelengths of UV, we repetitively exposed human skin to suberythemal doses of UVA and/or UVB over 2 weeks after which a challenge dose of UVA&UVB was given. Although visual skin pigmentation (tanning) elicited by the different UV exposure protocols was similar, the melanin content and UV-protective effects against DNA damage in UVB-tanned skin (but not in UVA-tanned skin) were significantly higher. UVA-induced tans seem to result from the photooxidation of existing melanin and its precursors with some redistribution of pigment granules while UVB stimulates melanocytes to up-regulate melanin synthesis and increases pigmentation coverage, effects that are synergistically stimulated in UVA and UVB-exposed skin. Thus, UVA-tanning contributes essentially no photoprotection, although all types of UV-induced tanning result in DNA and cellular damage which can eventually lead to photocarcinogenesis. PMID:20979596

  19. Historical aphasia cases: "Tan-tan", "Vot-vot", and "Cré nom!"

    Directory of Open Access Journals (Sweden)

    Hélio A.G. Teive

    2011-06-01

    Full Text Available We describe three cases of aphasia in patients who were internationally famous historical personalities, such as the case of Mr. Leborgne ("Tan" published by Paul Broca in 1861, which became a reference for the study of aphasias. The other cases described here are those of the Russian revolutionary and politician Vladimir Ilyitch Ulianov (Lenin ("Vot-vot" and the French poet Charles Baudelaire ("Cré nom!". Besides their historical relevance and the clinical picture of aphasia, these three cases share as a common feature the occurrence of speech automatisms or stereotypes.

  20. Historical aphasia cases: "Tan-tan", "Vot-vot", and "Cré nom!".

    Science.gov (United States)

    Teive, Hélio A G; Munhoz, Renato P; Caramelli, Paulo

    2011-06-01

    We describe three cases of aphasia in patients who were internationally famous historical personalities, such as the case of Mr. Leborgne ("Tan") published by Paul Broca in 1861, which became a reference for the study of aphasias. The other cases described here are those of the Russian revolutionary and politician Vladimir Ilyitch Ulianov (Lenin) ("Vot-vot") and the French poet Charles Baudelaire ("Cré nom!"). Besides their historical relevance and the clinical picture of aphasia, these three cases share as a common feature the occurrence of speech automatisms or stereotypes.

  1. Molecular spectroscopic study for suggested mechanism of chrome tanned leather.

    Science.gov (United States)

    Nashy, Elshahat H A; Osman, Osama; Mahmoud, Abdel Aziz; Ibrahim, Medhat

    2012-03-01

    Collagen represents the structural protein of the extracellular matrix, which gives strength of hides and/or skin under tanning process. Chrome tan is the most important tanning agent all over the world. The methods for production of leather evolved over several centuries as art and engineering with little understanding of the underlying science. The present work is devoted to suggest the most probable mechanistic action of chrome tan on hide proteins. First the affect of Cr upon hide protein is indicated by the studied mechanical properties. Then the spectroscopic characterization of the hide protein as well as chrome tanned leather was carried out with Horizontal Attenuated Total Reflection (HATR) FT-IR. The obtained results indicate how the chromium can attached with the active sites of collagen. Molecular modeling confirms that chromium can react with amino as well as carboxylate groups. Four schemes were obtained to describe the possible interactions of chrome tan with hide proteins. Copyright © 2011 Elsevier B.V. All rights reserved.

  2. Electrochemical treatment of spent tan bath solution for reuse

    Directory of Open Access Journals (Sweden)

    Amel Benhadji

    2018-03-01

    Full Text Available A spent tanning bath contains high concentration of salts, chromium and protein. The treatment system for removal of chlorides or chromium from this effluent is expensive. In this context this waste has to be reused. Our study focuses on the application of advanced oxidation processes for protein removal present in a tanning bath. To improve the quality of the chromium tanning bath, two electrochemical processes (electrooxidation and peroxi-electrocoagulation process, PEP are investigated in a batch reactor. The effects of operational parameters such as reactor configuration, current density and electrolysis time on chemical oxygen demand (COD and protein removal efficiency are examined. Results indicated that under the optimum operating range for process, the COD and protein removal efficiency reached 53 and 100%, respectively. The optimum values are determined for the hybrid process (PEP under 0.13 A·cm−2 over 2 h. The treated tanning bath is used as a tanning solution in leather processing. The influence of chromium salt dose, pH solution, stirring time and contact time on the leather characteristic is evaluated. The hides tanned after the addition of 0.25% of commercial chromium salt, at pH solution, leaving them stirring for 4 h with a contact time of 2 days, and showed good hydrothermal stability and physical characteristics of leather.

  3. Spot market for uranium

    International Nuclear Information System (INIS)

    Colhoun, C.

    1982-01-01

    The spot market is always quoted for the price of uranium because little information is available about long-term contracts. A review of the development of spot market prices shows the same price curve swings that occur with all raw materials. Future long-term contracts will probably be lower to reflect spot market prices, which are currently in the real-value range of $30-$35. An upswing in the price of uranium could come in the next few months as utilities begin making purchases and trading from stockpiles. The US, unlike Europe and Japan, has already reached a supply and demand point where the spot market share is increasing. Forecasters cannot project the market price, they can only predict the presence of an oscillating spot or a secondary market. 5 figures

  4. Photoprotective effect of a psoralen-UVA-induced tan

    International Nuclear Information System (INIS)

    Gschnait, F.; Brenner, W.; Wolff, K.

    1978-01-01

    To determine whether a tan produced by 8-MOP and UVA protects from subsequent solar light irradiation, volunteers were irradiated with unfiltered Xenon arc light before and 10 days after a 1 week's course of four 8-MOP-UVA treatments. Evaluation of the minimal erythema doses and of histological changes before and after 8-MOP-UVA treatment revealed that the 8-MOP-UVA induced tan protected against the erythemogenic and cell damaging effects of Xenon arc light. Unscheduled repair DNA synthesis, used as a measure for UVB-induced DNA damage and repair, was also investigated in skin irradiated with the Xenon arc before and after 8-MOP-UVA induced tanning. Both the number of grains per sparse labeled cell and the number of sparse labeled cells per 1000 cells, were found to be significantly lower in tanned skin; taking decreased unscheduled repair DNA synthesis as a measure for decreased DNA-damage, these findings also demonstrate a photoprotective effect of the 8-MOP-UVA induced tan. (orig.) [de

  5. ON THE THERMAL BEHAVIOR OF DIFFERENT TANNED BOVINE LEATHERS

    Directory of Open Access Journals (Sweden)

    VARGANICI Cristian-Dragoş

    2017-05-01

    Full Text Available Leather is one of the most globally spread biomaterial which is obtained by the processing of different animal skins. It encompasses a wide palette of applications, from footwear and clothing to upholsteries and different types of furniture [1], [2], [3]. The main constituent of animal skins is collagen, a supramolecular fibrillar protein in the form of a triple helix. This form endows leather with elasticity, good mechanical properties and softness. A major disadvantage resides in the inapplicability of raw animal hides, due to their microbiological instability and decay through rotting. Microbiological stability is obtained through the tanning process, characterized by protein crosslinking and drying afterwards. After tanning the leather exhibits the required properties for the desired specific applications in terms of aspect, availability and sustainability [4], [5]. The study aims to elucidate the thermal decomposition process of chrome-free tanned bovine hide (wet-white using a new product based on titanium and aluminium salts compared with the same hide tanned by chromium salts (wet-blue. The thermal behavior was studied by dynamic thermogravimetry in nitrogen atmosphere, up to 700 oC. A comparative thermal decomposition study between the different tanned bovine leathers was undertaken.

  6. Mononucleosis spot test

    Science.gov (United States)

    Monospot test; Heterophile antibody test; Heterophile agglutination test; Paul-Bunnell test; Forssman antibody test ... The mononucleosis spot test is done when symptoms of mononucleosis are ... Fatigue Fever Large spleen (possibly) Sore throat Tender ...

  7. Corneal perforation secondary to UV radiation from a tanning lamp.

    Science.gov (United States)

    Funnell, Charlotte; Watson, Keith; Stewart, Owen; Dua, Gurcharan

    2006-12-01

    To report the case of a patient with keratoconus who developed a corneal perforation secondary to UV radiation from a tanning lamp. We believe this to be the first case of a corneal perforation secondary to UV radiation. The presentation and management of the patient and the pathophysiology of UV keratitis are discussed. Our patient developed a full-thickness corneal perforation after 30 minutes of tanning lamp exposure without eye protection. The cornea was temporized with cyanoacrylate tissue adhesive until penetrating keratoplasty could be performed. With an increased understanding of the pathophysiology of UV damage, treatment should be aimed at modulating the disease to reduce the likelihood of a poor outcome.

  8. Comparative virulence of Pyrenophora teres f. teres from Syria and Tunisia and screening for resistance sources in barley: implications for breeding.

    Science.gov (United States)

    Bouajila, A; Zoghlami, N; Al Ahmed, M; Baum, M; Ghorbel, A; Nazari, K

    2011-11-01

    The aim of this study is to investigate the pathogenic diversity and virulence groups among Pyrenophora teres f. teres isolates, sampled from Syria and Tunisia, and to identify the most effective source of resistance in barley that could be used in breeding programmes to control net blotch in both countries. One hundred and four isolates of P. teres f. teres were collected from barley in different agroecological zones of Tunisia and Syria. Their virulence was evaluated using 14 barley genotypes as differential hosts. The UPGMA clustering identified high pathogenic variability; the isolates were clustered onto 20 pathotypes that were sheltered under three virulence groups, with high, intermediate and low disease scores. According to susceptibility/resistance frequencies and mean disease ratings, CI05401 cultivar ranked as the best differential when inoculated with the Syrian isolates. However, CI09214 cultivar was classified as the best effective source of resistance in Tunisia. All P. teres f. teres isolates were differentially pathogenic. CI09214 and CI05401 cultivars were released as the most effective sources of resistance in Syria and Tunisia. National and international barley breeding programmes that seek to develop resistance against P. teres f. teres in barley should strongly benefit from this study. This resistance cannot be achieved without the proper knowledge of the pathogen virulence spectrum and the sources of host resistance. © 2011 The Authors. Letters in Applied Microbiology © 2011 The Society for Applied Microbiology.

  9. Permanent Closure of the TAN-664 Underground Storage Tank

    Energy Technology Data Exchange (ETDEWEB)

    Bradley K. Griffith

    2011-12-01

    This closure package documents the site assessment and permanent closure of the TAN-664 gasoline underground storage tank in accordance with the regulatory requirements established in 40 CFR 280.71, 'Technical Standards and Corrective Action Requirements for Owners and Operators of Underground Storage Tanks: Out-of-Service UST Systems and Closure.'

  10. Status of the TAN aperture model in MAD-X

    CERN Document Server

    Fitterer, M; Chemli, S; De Maria, R; Giovannozzi, M

    2014-01-01

    In this paper we describe the update of the existing TAN layout and aperture model in the MAD-X sequence for IR1 and IR5. The updated model introduces new markers indicating the longitudinal layering of the absorber and the geometry of the Y-chamber.

  11. 76 FR 46677 - Indoor Tanning Services; Cosmetic Services Excise Taxes

    Science.gov (United States)

    2011-08-03

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Parts 40 and 49 RIN 1545-BJ40 Indoor Tanning Services; Cosmetic Services Excise Taxes AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of public hearing on...

  12. Action Memorandum for Decommissioning of TAN-607 Hot Shop Area

    Energy Technology Data Exchange (ETDEWEB)

    M. A. Pinzel

    2007-05-01

    The Department of Energy is documenting the selection of an alternative for the TAN-607 Hot Shop Area using a Comprehensive Environmental Response, Compensation, and Liability Act non-time-critical removal action (NTCRA). The scope of the removal action is limited to TAN-607 Hot Shop Area. An engineering evaluation/cost analysis (EE/CA) has assisted the Department of Energy Idaho Operations Office in identifuomg the most effective method for performing the decommissioning of this structure whose mission has ended. TAN-607 Hot Shop Area is located at Test Area North Technical Support Facility within the Idaho National Laboratory Site. The selected alternative consists of demolishing the TAN-607 aboveground structures and components, removing belowground noninert components (e.g. wood products), and removing the radiologically contaminated debris that does not meet remedial action objectives (RAOs), as defined in the Record of Decision Amendment for the V-Tanks and Explanation of Significant Differences for the PM-2A Tanks at Test Area North, Operable Unit 1-10.

  13. "Darkness Overcomes You": Shaun Tan and Søren Kierkegaard

    Science.gov (United States)

    Johansen, Martin Blok

    2015-01-01

    This article analyses Shaun Tan's picturebook "The Red Tree" using some of the central concepts of existentialism developed by the Danish philosopher Søren Kierkegaard. Kierkegaard argued that being a person entails a coming-to-be ["tilblivelse"], and for the person this coming-to-be manifests itself as a task. The task is to…

  14. From metaphor to allegory : The Japanese manga Afuganisu-tan

    NARCIS (Netherlands)

    Cornevin, V.; Forceville, C.

    2017-01-01

    Afuganisu-tan is an online manga by Timaking, published in English online in 2005, that presents selected historical events of modern Afghanistan in a series of 29 episodes plus an appendix. An episode consists of a four-panel micro-narrative in which Afghanistan and the countries with which its

  15. Tan's distributions and Fermi-Huang pseudopotential in momentum space

    DEFF Research Database (Denmark)

    Valiente, Manuel

    2012-01-01

    The long-standing question of finding the momentum representation for the s-wave zero-range interaction in three spatial dimensions is here solved. This is done by expressing a certain distribution, introduced in a formal way in [ S. Tan Ann. Phys. (NY) 323 2952 (2008)], explicitly. The resulting...

  16. Cotton-wool spots.

    Science.gov (United States)

    Brown, G C; Brown, M M; Hiller, T; Fischer, D; Benson, W E; Magargal, L E

    1985-01-01

    A series of 24 consecutive patients presenting with a fundus picture characterized by a predominance of cotton-wool spots, or a single cotton-wool spot, is reported. Excluded were patients with known diabetes mellitus. Etiologic conditions found included previously undiagnosed diabetes mellitus in five patients, systemic hypertension in five patients, cardiac valvular disease in two patients, radiation retinopathy in two patients, and severe carotid artery obstruction in two patients. Dermatomyositis, systemic lupus erythematosus, polyarteritis nodosa, leukemia, AIDS, Purtscher's retinopathy, metastatic carcinoma, intravenous drug abuse, partial central retinal artery obstruction, and giant cell arteritis were each found in one patient. In only one patient did a systemic workup fail to reveal an underlying cause. The presence of even one cotton-wool spot in an otherwise normal fundus necessitates an investigation to ascertain systemic etiologic factors.

  17. Tanning in solarium – knowledge, attitudes and Polish habits

    Directory of Open Access Journals (Sweden)

    Katarzyna Torzewska

    2014-03-01

    Full Text Available Introduction. Tanning devices are sources of UVA and UVB radiation. UV exposure can cause damage to the cornea of the eye, skin burns and even skin cancer. Appropriate use of solarium requires adequate knowledge of health effects resulting from the excessive use of sunbeds. The aim of the study was to examine knowledge, attitudes and habits in the solarium use. Material and methods. The study was based on our own questionnaire distributed among the citizens of a city located in Łódź Province. The study group consisted of 135 adults, mostly women and people with secondary and vocational education. Participants of the study were asked to answer specific questions included in the questionnaire concerning the knowledge of UV radiation, attitudes and the behaviour in the solarium. Results. 36% of the respondents were going to the solarium. 38% of the respondents weren’t going at all. Every fourth respondent used to go to the solarium in the past, however gave up this type of tanning for some reasons. Protecting goggles were used only by 18% of the respondents. 94% of the respondents never asked the service about CE certificates for the sunbeds intended for use. Conclusions. People tanning in the solarium, in comparison to those who do not use the artificial sun, enjoy better knowledge of the ultraviolet radiation. However they do not follow the requirements of the safe tanning. They are also not interested in technical conditions of the sunbeds. People who are not tanning in the solarium are more aware of health effects caused by UV radiation. Actions promoting public awareness on negative health effects of exposure to UV radiation in the solarium are needed.

  18. Tan Silliksaar, Tõnu Ling : meie piltides ei ole mingit trikitamist ega skandaali / Tõnu Ling, Tan Silliksaar ; interv. Heli Salong

    Index Scriptorium Estoniae

    Ling, Tõnu

    2005-01-01

    Kuressaare kultuurikeskuses ja Saaremaa kunstistuudios avati Tõnu Lingi ja Tan Silliksaare fotonäitus-müük "Maameeste maastikud". Fotod on prinditud spetsiaalsele, kunsti reprodutseerimiseks mõeldud lõuendile. Autorid oma koostööst, fotodest, lõuenditehnikast

  19. 77 FR 37838 - Disregarded Entities and the Indoor Tanning Services Excise Tax

    Science.gov (United States)

    2012-06-25

    ... 1545-BK38 Disregarded Entities and the Indoor Tanning Services Excise Tax AGENCY: Internal Revenue... the indoor tanning services excise tax. These regulations affect disregarded entities responsible for collecting the indoor tanning services excise tax and owners of those disregarded entities. The text of the...

  20. 77 FR 37806 - Disregarded Entities and the Indoor Tanning Services Excise Tax

    Science.gov (United States)

    2012-06-25

    ... Disregarded Entities and the Indoor Tanning Services Excise Tax AGENCY: Internal Revenue Service (IRS... tanning services excise tax. These regulations affect disregarded entities responsible for collecting the indoor tanning services excise tax and owners of those disregarded entities. The text of these temporary...

  1. Molecular modeling approach to vegetable tanning: preliminary results for gallotannin interactions with the collagen microfibril

    Science.gov (United States)

    Tanning of animal hides produces leather, a durable, flexible material that is stabilized against putrefaction. Chrome-tanned wet blue, aldehyde crosslinked wet white, and vegetable tanned hides are major contributors to current leather production. Although the chemistries involved are significant...

  2. Ultraviolet radiation, sun and tanning salons; Ultrafiolett straaling, sol og solarier

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The pamphlet gives some information about ultraviolet radiation (UV), UV-sources and health effects, tanning in artificial and natural sun. It also includes some sun protection advice. It is intended mainly for persons inspecting artificial tanning units and for the owners of tanning salons. (Author)

  3. TANNED LEATHERS PROPERTIES MODIFICATION AS A RESULT OF ARTIFICIAL AGEING

    Directory of Open Access Journals (Sweden)

    ROŞU Dan

    2017-05-01

    Full Text Available Leather is a high tech material with different application fields, such as automotive, manufacturing of leatherwear articles or clothing and footwear. Leather is a biomaterial obtained by processing animal skins. Unfortunately, raw animal hides are practically inutilizable, due to their microbiological instability and are affected by rotting. Microbiological stability is achieved by tanning, when the protein is crosslinked, followed by drying. After crosslinking and drying, the new material shows the required properties of sustainability, availability and an esthetically pleasing aspect to the touch, making it available across its entire range of applications. From a structural point of view the animal skins are constituted of collagen, which is a fibrilar protein with a high degree of supramolecular organization in triple helix form that endows softness, elasticity and mechanical strength. High quality standards and lack of toxicity are required in all cases. Leather colour changes during exposure to light radiations are considered a consequence of the presence of some products with weak photochemical resistance during fabrication. The study aims to compare changes in properties of leathers obtained using mineral tanning agents such as Cr III salts and those obtained with the more environment-friendly technology using acid hydrolysis. Accelerated aging studies were conducted on tanned leathers by exposing the samples to UV radiation with different irradiation doses and two wavelengths (254 and 365 nm under controlled humidity and temperature conditions. Structural changes caused by irradiation were studied by FTIR. Colour changes on the sample surfaces were assessed during irradiation with the CIEL a*b* system. The colour parameters variation (L*, a*, b* and colour differences have been discussed in correlation with structural changes, tanning method and irradiation conditions.

  4. Tan's Epsilon-Determinant and Ranks of Matrices over Semirings

    Science.gov (United States)

    Mohindru, Preeti; Pereira, Rajesh

    2015-01-01

    We use the ϵ-determinant introduced by Ya-Jia Tan to define a family of ranks of matrices over certain semirings. We show that these ranks generalize some known rank functions over semirings such as the determinantal rank. We also show that this family of ranks satisfies the rank-sum and Sylvester inequalities. We classify all bijective linear maps which preserve these ranks. PMID:27347506

  5. DNA Repair Variants, Indoor Tanning and Risk of Melanoma

    Science.gov (United States)

    Torres, Salina M.; Luo, Li; Lilyquist, Jenna; Stidley, Christine A; Flores, Kristina; White, Kirsten A. M.; Erdei, Esther; Gonzales, Melissa; Paine, Susan; Vogel, Rachel Isaksson; Lazovich, DeAnn; Berwick, Marianne

    2013-01-01

    Summary Although ultraviolet radiation (UV) exposure from indoor tanning has been linked to an increased risk of melanoma, the role of DNA repair genes in this process is unknown. We evaluated the association of 92 single nucleotide polymorphisms (SNPs) in 20 DNA repair genes with the risk of melanoma and indoor tanning among 929 melanoma patients and 817 controls from the Minnesota Skin Health Study. Significant associations with melanoma risk were identified for SNPs in ERCC4, ERCC6, RFC1, XPC, MGMT, and FBRSL1 genes; with a cut-off of p<0.05. ERCC6 and FBRSL1 gene variants and haplotypes interacted with indoor tanning. However, none of the 92 SNPs tested met the correction criteria for multiple comparisons. This study, based on an a priori interest in investigating the role of DNA repair capacity using variants in base excision and nucleotide excision repair, identified several genes that may play a role in resolving UV-induced DNA damage. PMID:23659246

  6. A Web-Based Intervention to Reduce Indoor Tanning Motivations in Adolescents: a Randomized Controlled Trial.

    Science.gov (United States)

    Hillhouse, Joel; Turrisi, Rob; Scaglione, Nichole M; Cleveland, Michael J; Baker, Katie; Florence, L Carter

    2017-02-01

    Youthful indoor tanning as few as ten sessions can increase the risk of melanoma by two to four times with each additional session adding another 2 % to the risk. Recent research estimates that indoor tanning can be linked to approximately 450,000 cases of skin cancer annually in the USA, Europe, and Australia. Despite these risks, indoor tanning remains popular with adolescents. This study tested the efficacy of a web-based skin cancer prevention intervention designed to reduce indoor tanning motivations in adolescent females. A nationally representative sample of 443 female teens was enrolled from an online panel into a two-arm, parallel group design, randomized controlled trial. Treatment participants received an appearance-focused intervention grounded in established health behavior change models. Controls viewed a teen alcohol prevention website. Outcome variables included willingness and intentions to indoor tan, willingness to sunless tan, and measures of indoor tanning attitudes and beliefs. The intervention decreased willingness and intentions to indoor tan and increased sunless tanning willingness relative to controls. We also examined indirect mechanisms of change through intervening variables (e.g., indoor tanning attitudes, norms, positive and negative expectancies) using the product of coefficient approach. The web-based intervention demonstrated efficacy in changing adolescent indoor tanning motivations and improving their orientation toward healthier alternatives. Results from the intervening variable analyses give guidance to future adolescent skin cancer prevention interventions.

  7. Chocolate spot of Eucalyptus

    OpenAIRE

    Cheewangkoon, R.; Groenewald, J.Z.; Hyde, K.D.; To-anun, C.; Crous, P.W.

    2012-01-01

    Chocolate Spot leaf disease of Eucalyptus is associated with several Heteroconium-like species of hyphomycetes that resemble Heteroconium s.str. in morphology. They differ, however, in their ecology, with the former being plant pathogenic, while Heteroconium s.str. is a genus of sooty moulds. Results of molecular analyses, inferred from DNA sequences of the large subunit (LSU) and internal transcribed spacers (ITS) region of nrDNA, delineated four Heteroconium-like species on Eucalyptus, name...

  8. El spot electoral negativo

    Directory of Open Access Journals (Sweden)

    Palma Peña-Jiménez

    2011-01-01

    Full Text Available l spot político tiene durante la campaña un objetivo final inequívoco: la consecución del voto favorable. Se dirige al cuerpo electoral a través de la televisión y de Internet, y presenta, en muchos casos, un planteamiento negativo, albergando mensajes destinados a la crítica frontal contra el adversario, más que a la exposición de propuestas propias. Este artículo se centra en el análisis del spot electoral negativo, en aquellas producciones audiovisuales construidas sin más causa que la reprobación del contrincante. Se trata de vídeos que, lejos de emplearse en difundir las potencialidades de la organización y las virtudes de su candidato –además de su programa electoral–, consumen su tiempo en descalificar al oponente mediante la transmisión de mensajes, muchas veces, ad hominem. Repasamos el planteamiento negativo del spot electoral desde su primera manifestación, que en España data de 1996, año de emisión del conocido como vídeo del dóberman, sin olvidar otros ejemplos que completan el objeto de estudio.

  9. Precise baseline determination for the TanDEM-X mission

    Science.gov (United States)

    Koenig, Rolf; Moon, Yongjin; Neumayer, Hans; Wermuth, Martin; Montenbruck, Oliver; Jäggi, Adrian

    The TanDEM-X mission will strive for generating a global precise Digital Elevation Model (DEM) by way of bi-static SAR in a close formation of the TerraSAR-X satellite, already launched on June 15, 2007, and the TanDEM-X satellite to be launched in May 2010. Both satellites carry the Tracking, Occultation and Ranging (TOR) payload supplied by the GFZ German Research Centre for Geosciences. The TOR consists of a high-precision dual-frequency GPS receiver, called Integrated GPS Occultation Receiver (IGOR), and a Laser retro-reflector (LRR) for precise orbit determination (POD) and atmospheric sounding. The IGOR is of vital importance for the TanDEM-X mission objectives as the millimeter level determination of the baseline or distance between the two spacecrafts is needed to derive meter level accurate DEMs. Within the TanDEM-X ground segment GFZ is responsible for the operational provision of precise baselines. For this GFZ uses two software chains, first its Earth Parameter and Orbit System (EPOS) software and second the BERNESE software, for backup purposes and quality control. In a concerted effort also the German Aerospace Center (DLR) generates precise baselines independently with a dedicated Kalman filter approach realized in its FRNS software. By the example of GRACE the generation of baselines with millimeter accuracy from on-board GPS data can be validated directly by way of comparing them to the intersatellite K-band range measurements. The K-band ranges are accurate down to the micrometer-level and therefore may be considered as truth. Both TanDEM-X baseline providers are able to generate GRACE baselines with sub-millimeter accuracy. By merging the independent baselines by GFZ and DLR, the accuracy can even be increased. The K-band validation however covers solely the along-track component as the K-band data measure just the distance between the two GRACE satellites. In addition they inhibit an un-known bias which must be modelled in the comparison, so the

  10. De bepaling van TAN-excretie op varkens-, pluimvee- en melkveebedrijven = Quantification of TAN excretion in pig, poultry and dairy farms

    NARCIS (Netherlands)

    Bikker, P.; Jongbloed, A.W.; Vuuren, van A.M.

    2013-01-01

    The ammonia emission from farm animals is largely determined by the excretion of total ammoniacal nitrogen (TAN) in the urine. In this report the on-farm collection of data required to calculate TAN excretion on pig, poultry, and dairy farms is addressed.

  11. Prevalence of tanning addiction and associations with behavioral health conditions among multiethnic adolescents.

    Science.gov (United States)

    Miller, Kimberly A; Piombo, Sarah E; Cho, Junhan; Higgins, Shauna; Wysong, Ashley; Sussman, Steve; Cockburn, Myles G; Leventhal, Adam M

    2018-02-23

    Evidence indicates that tanning may be addictive and is associated with other behavioral health conditions. Few studies have examined tanning addiction among adolescents. We performed a cross-sectional study to explore the relationship between tanning addiction, substance use, and psychological conditions among ethnoracially diverse 16-17 year-olds. Tanning addiction was assessed using the modified (m) CAGE measure among 11 th grade students in Los Angeles (N=2,637; response rate 78%). Overall, 7.02% of the sample met tanning addiction criteria. Tanning addiction was significantly associated with past 30-day smoking and marijuana use, problem substance use, depression, panic disorder, obsessive compulsive disorder (OCD), and bipolar disorder in regression models. After controlling for all significant substance use and psychological variables, problem marijuana use and OCD remained significantly associated with tanning addiction (odds ratio 2.06, 95% confidence interval 1.03-4.09; and 2.54, 1.73-3.72, respectively.) Tanning addiction was also significantly associated with multiple problem substance use and behavioral health conditions. Our findings indicate an appreciable prevalence of tanning addiction among multiethnic adolescents, and suggest the importance of addressing tanning addiction in the context of comorbid behavioral conditions to reduce this high-risk behavior among diverse youth. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

  12. The indoor UV tanning industry: a review of skin cancer risk, health benefit claims, and regulation.

    Science.gov (United States)

    Levine, Jody A; Sorace, Michael; Spencer, James; Siegel, Daniel M

    2005-12-01

    Nearly 30 million people tan indoors in the United States annually, including 2.3 million adolescents. Despite increased evidence on the dangers of artificial UV radiation, the popularity of indoor tanning is growing. We aim to assess the following 3 entities: (1) the association of indoor tanning with skin cancer; (2) statements regarding the health benefits of indoor tanning, especially regarding the production of vitamin D; and (3) current regulation of the tanning industry in the United States. We conducted a narrative review of the literature. Indoor tanning poses great risks. Studies support the role of artificial UV radiation in cutaneous carcinogenesis. Despite claims by the tanning industry, artificial tanning is not a safe or necessary way to increase systemic vitamin D levels. The National Institutes of Health and the World Health Organization have acknowledged the risks of indoor tanning. Nonetheless, regulations limiting tanning in the United States are surprisingly sparse. Systematic review of the literature was not performed. Health care providers must increase efforts to warn and educate the public and government about the dangers of UV radiation.

  13. The Relationships Between Female Adolescents' Media Use, Indoor Tanning Outcome Expectations, and Behavioral Intentions.

    Science.gov (United States)

    Myrick, Jessica Gall; Noar, Seth M; Kelley, Dannielle; Zeitany, Alexandra E

    2017-06-01

    Unlike other types of cancer, skin cancer incidence rates are on the rise and adolescent females are particularly likely to tan indoors, a major risk factor. However, little research has examined the role of media use in encouraging or discouraging this dangerous behavior in this population. To empirically assess the links between media use, indoor tanning-related outcome expectations, and behavioral intentions. A survey of adolescent females ( N = 510) ages 15 to 18 in the Southeastern United States assessed demographics, types of media use, and indoor tanning intentions. Significant correlations between media use and indoor tanning outcome expectations were found. Use of interpersonal and social media (i.e., talking on the phone, texting, and online social media) were positively associated with positive outcome expectations about indoor tanning and negatively associated with negative outcome expectations. A path analysis revealed that interpersonal/social media use had indirect associations with indoor tanning intentions via tanning outcome expectations. Mass media use (e.g., news media, entertainment media, and magazines) was not significantly associated with most indoor tanning outcome expectations but did have a direct negative association with behavioral intentions. There are important relationships between media use, indoor tanning outcome expectations, and behavioral intentions. Interpersonal and social media use may help cultivate outcome expectations that encourage indoor tanning, which in turn may increase intentions to tan, while news media consumption in particular may reduce intentions to tan. These findings highlight the social nature of adolescent females and point to specific intervention channels for reducing indoor tanning among this population.

  14. An in vivo evaluation of surface polishing of TAN intermedullary nails for ease of removal

    Directory of Open Access Journals (Sweden)

    JS Hayes

    2009-09-01

    Full Text Available Fractures of the tibia and femoral diaphysis are commonly repaired by intra-medullary (IM nailing. Currently IM nails are available in either electropolished stainless steel (SS or in Titanium-Aluminium-Niobium (TAN. After healing, removal of the nails still is common but removal of TAN IM nails often has complications whereas SS IM nails of the same design are less often associated with problems. We believe the differences in removal are due to the ability of TAN to promote strong bone on-growth. We have previously shown in vivo that polishing cortical screws reduces removal torque and the percentage of bone-implant contact. Therefore, we postulate that bony on-growth onto IM nails can be reduced by means of surface polishing, for ease of removal. Here we aim to compare the pull-out forces for removal of standard TAN (TAN-S compared to experimental paste polished TAN (TAN-PP IM nails from a bilateral non-fracture sheep tibia model after 12 months implantation. Histological analysis was also performed to assess tissue on-growth to the nails. We show that polishing significantly reduces (p=0.05 the extraction force required for TAN IM nail removal. This effect in part is attributable to the distinct tissue-material reaction produced. For TAN-S nails direct bone contact was observed while for TAN-PP nails a fibrous tissue interface was noted. Since TAN is preferred over SS for IM nailing due to superior biocompatibility and mechanical properties, we believe these findings could be used to recommend changes to current surface technologies of intramedullary nails to reduce complications seen with nail removal especially in rapidly growing bone in children.

  15. Health behaviours associated with indoor tanning based on the 2012/13 Manitoba Youth Health Survey

    Directory of Open Access Journals (Sweden)

    E. Harland

    2016-08-01

    Full Text Available Introduction: Although indoor tanning causes cancer, it remains relatively common among adolescents. Little is known about indoor tanning prevalence and habits in Canada, and even less about associated behaviours. This study explores the prevalence of adolescent indoor tanning in Manitoba and its association with other demographic characteristics and health behaviours. Methods: We conducted secondary analyses of the 2012/13 Manitoba Youth Health Survey data collected from Grade 7 to 12 students (n = 64 174 and examined associations between indoor tanning (whether participants had ever used artificial tanning equipment and 25 variables. Variables with statistically significant associations to indoor tanning were tested for collinearity and grouped based on strong associations. For each group of highly associated variables, the variable with the greatest effect upon indoor tanning was placed into the final logistic regression model. Separate analyses were conducted for males and females to better understand sex-based differences, and analyses were adjusted for age. Results: Overall, 4% of male and 9% of female students reported indoor tanning, and prevalence increased with age. Relationships between indoor tanning and other variables were similar for male and female students. Binary logistic regression models indicated that several variables significantly predicted indoor tanning, including having part-time work, being physically active, engaging in various risk behaviours such as driving after drinking for males and unplanned sex after alcohol/drugs for females, experiencing someone say something bad about one's body shape/size/appearance, identifying as trans or with another gender, consuming creatine/other supplements and, for females only, never/rarely using sun protection. Conclusion: Indoor tanning among adolescents was associated with age, part-time work, physical activity and many consumption behaviours and lifestyle risk factors. Though

  16. The Spotting Distribution of Wildfires

    Directory of Open Access Journals (Sweden)

    Jonathan Martin

    2016-06-01

    Full Text Available In wildfire science, spotting refers to non-local creation of new fires, due to downwind ignition of brands launched from a primary fire. Spotting is often mentioned as being one of the most difficult problems for wildfire management, because of its unpredictable nature. Since spotting is a stochastic process, it makes sense to talk about a probability distribution for spotting, which we call the spotting distribution. Given a location ahead of the fire front, we would like to know how likely is it to observe a spot fire at that location in the next few minutes. The aim of this paper is to introduce a detailed procedure to find the spotting distribution. Most prior modelling has focused on the maximum spotting distance, or on physical subprocesses. We will use mathematical modelling, which is based on detailed physical processes, to derive a spotting distribution. We discuss the use and measurement of this spotting distribution in fire spread, fire management and fire breaching. The appendix of this paper contains a comprehensive review of the relevant underlying physical sub-processes of fire plumes, launching fire brands, wind transport, falling and terminal velocity, combustion during transport, and ignition upon landing.

  17. Indoor Tanning Among High School Students in the United States, 2009 and 2011

    Science.gov (United States)

    Guy, Gery P.; Berkowitz, Zahava; Tai, Eric; Holman, Dawn M.; Jones, Sherry Everett; Richardson, Lisa C.

    2015-01-01

    IMPORTANCE Indoor tanning is associated with an increased risk of skin cancer, including melanoma, and is particularly dangerous for younger and more frequent indoor tanners. OBJECTIVE To examine the prevalence of indoor tanning and frequent indoor tanning (≥10 times during the 12 months before each survey) and their association with health-related behaviors. DESIGN, SETTING, AND PARTICIPANTS A cross-sectional study examined data from the 2009 and 2011 national Youth Risk Behavior Surveys, which used nationally representative samples of US high school students representing approximately 15.5 million students each survey year. The study included 25 861 students who answered the indoor tanning question. MAIN OUTCOMES AND MEASURES The prevalence of indoor tanning and frequent indoor tanning were examined as well as their association with demographic characteristics and health-related behaviors using multivariable logistic regression modeling. RESULTS The prevalence of indoor tanning was greater among female, older, and non-Hispanic white students. Indoor tanning was highest among female students aged 18 years or older, with 31.5% engaging in indoor tanning in 2011, and among non-Hispanic white female students, with 29.3% engaging in indoor tanning in 2011. Among female students, the adjusted prevalence of indoor tanning decreased from 26.4% in 2009 to 20.7% in 2011. Among female and male students, indoor tanning was associated with other risk-taking behaviors, such as binge drinking (P < .001 and P = .006, respectively), unhealthy weight control practices (P < .001, for both), and having sexual intercourse (P < .001, for both). Additionally, indoor tanning among female students was associated with using illegal drugs (P < .001) and having sexual intercourse with 4 or more persons (P = .03); use among male students was associated with taking steroids without a physician’s prescription (P < .001), smoking cigarettes daily (P = .03), and attempting suicide (P = .006

  18. Association of Socioeconomic and Geographic Factors With Google Trends for Tanning and Sunscreen.

    Science.gov (United States)

    Seth, Divya; Gittleman, Haley; Barnholtz-Sloan, Jill; Bordeaux, Jeremy S

    2018-02-01

    Internet search trends are used to track both infectious diseases and noncommunicable conditions. The authors sought to characterize Google Trends search volume index (SVI) for the terms "sunscreen" and tanning ("tanning salon" and "tanning bed") in the United States from 2010 to 2015 and analyze association with educational attainment, average income, and percent white data by state. SVI is search frequency data relative to total search volume. Analysis of variance, univariate, and multivariate analyses were performed to assess seasonal variations in SVI and the association of state-level SVI with state latitudes and census data. Hawaii had the highest SVI for sunscreen searches, whereas Alaska had the lowest. West Virginia had the highest SVI for tanning searches, whereas Hawaii had the lowest. There were significant differences between seasonal SVI for sunscreen and tanning searches (p trends for sunscreen and tanning are influenced by socioeconomic factors, and could be a tool for skin-related public health.

  19. North American Magazine Coverage of Skin Cancer and Recreational Tanning Before and After the WHO/IARC 2009 Classification of Indoor Tanning Devices as Carcinogenic.

    Science.gov (United States)

    McWhirter, Jennifer E; Hoffman-Goetz, Laurie

    2015-09-01

    The mass media is an influential source of skin cancer information for the public. In 2009, the World Health Organization's International Agency for Research on Cancer classified UV radiation from tanning devices as carcinogenic. Our objective was to determine if media coverage of skin cancer and recreational tanning increased in volume or changed in nature after this classification. We conducted a directed content analysis on 29 North American popular magazines (2007-2012) to investigate the overall volume of articles on skin cancer and recreational tanning and, more specifically, the presence of skin cancer risk factors, UV behaviors, and early detection information in article text (n = 410) and images (n = 714). The volume of coverage on skin cancer and recreational tanning did not increase significantly after the 2009 classification of tanning beds as carcinogenic. Key-related messages, including that UV exposure is a risk factor for skin cancer and that indoor tanning should be avoided, were not reported more frequently after the classification, but the promotion of the tanned look as attractive was conveyed more often in images afterwards (p magazines.

  20. Melanin pigmentation gives rise to black spots on the wings of the silkworm Bombyx mori.

    Science.gov (United States)

    Ito, Katsuhiko; Yoshikawa, Manabu; Fujii, Takeshi; Tabunoki, Hiroko; Yokoyama, Takeshi

    2016-01-01

    Several mutants of the silkworm Bombyx mori show body color variation at the larval and adult stages. The Wild wing spot (Ws) mutant exhibits a phenotype in which the moth has a spot on the apex of the forewing. In this study, we investigated this trait to elucidate the molecular mechanism underlying the color pattern. Microscopy of the black spot of Ws mutants showed that the pigment emerges in the scales of the wing, and accumulation of the pigment becomes strong just before eclosion. We next examined the relationship between the black spot of the Ws mutant and melanin. The spectrophotometry using alkaline extracts from the black spot in the wing showed the highest absorption intensity at 405nm, which is the absorbance wavelength of melanin. Moreover, inhibition assays for enzymes implicated in melanin synthesis using 3-iodo-l-tyrosine (a tyrosine hydroxylase inhibitor) and L-α-methyl-DOPA (a dopa decarboxylase inhibitor) revealed that treatment with each inhibitor disrupted the pigmentation of the wing of the Ws mutant. On the basis of these results, we analyzed the expression pattern of five genes involved in melanin formation, and found that the expression levels of yellow and laccase2 were increased just before pigmentation, whereas those of DDC, tan, and TH were increased when the apex of the wing turned black. These results showed that melanin pigmentation gives rise to the black spot on the wing. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Study of the dechroming of tanned leather wastes

    Directory of Open Access Journals (Sweden)

    Botić Tatjana

    2004-01-01

    Full Text Available According to European legislation, it is not possible to dump any chromium-containing waste in Europe. The minimization of wastes is a key element in that strategy. It involves the application of clean technologies: low and non-waste technologies. The tanning industry generates substantial quantities of chromium-containing solid waste in the form of shavings and trimmings. The recycling and reuse of those wastes must be the primary target in optimizing processes of the leather industry. The problem is in a satisfying chromium separation from collagen fibers. Common hydrolysis processes-alkaline or acidic-give gelatins containing residual chromium (III. By using an oxidation agent (H2O2 before alkaline hydrolysis, in was demonstrated that chromium from chromium-containing leather wastes can be almost fully recovered by the previous oxidation of Cr(III to Cr(VI. This chromium can be reused in the tanning process. That would represent an economic saving. The best result of the dechroming process was a gelatin hydrolyzate with only 1.11 in respect to the initial amount.

  2. Electric dipole moments in the MSSM at large tan β

    International Nuclear Information System (INIS)

    Demir, D.; Olive, K.A.; Pospelov, M.; Ritz, A.

    2003-11-01

    Within the minimal supersymmetric standard model (MSSM), the large tan β regime can lead to important modifications in the pattern of CP-violating sources contributing to low energy electric dipole moments (EDMs). In particular, four-fermion CP-violating interactions induced by Higgs exchange should be accounted for alongside the constituent EDMs of quarks and electrons. To this end, we present a comprehensive analysis of three low energy EDM observables - namely the EDMs of thallium, mercury and the neutron - at large tan β, in terms of one- and two-loop contributions to the constituent EDMs and four-fermion interactions. We concentrate on the constrained MSSM as well as the MSSM with non-universal Higgs masses, and include the CP-violating phases of μ and A. Our results indicate that the atomic EDMs receive significant corrections from four-fermion operators, especially when Im(A) is the only CP-violating source, whereas the neutron EDM remains relatively insensitive to these effects. As a consequence, in a large portion of the parameter space, one cannot infer a separate bound on the electron EDM via the experimental constraint on the thallium EDM. Furthermore, we find that the electron EDM can be greatly reduced due to the destructive interference of one- and two-loop contributions with the latter being dominated by virtual staus. (orig.)

  3. Alkali-free method of hide preparation for tanning

    Directory of Open Access Journals (Sweden)

    V. Valeika

    2012-06-01

    Full Text Available Usually, beamhouse processes are carried out by varying a medium from strongly alkaline (unhairing-liming up to strongly acid (pickling. This study is designed to develop a preparation of hide for tanning via processes that avoid a sharp change of hide pH. Enzymes active in acid medium are employed for hide unhairing in a buffer system containing 2.5% acetic acid and 0.3% sodium acetate. An oxidative treatment with peracetic acid then allows the complete removal of residual hair and scud. During both processes, unhairing and oxidative treatment, the opening of the derma structure occurs: 13.3-14.6g of non-collagen proteins are removed and amount of dermatan sulphate decreases by 35%. The hide obtained can be chromed directly after the above processes and subsequent treatment with sodium chloride solution omitted conventional pickling. The pH of the hide varies in the range of 8.3-3.7 during the processes of preparation for tanning.

  4. Lifetime history of indoor tanning in young people: a retrospective assessment of initiation, persistence, and correlates

    Directory of Open Access Journals (Sweden)

    Lostritto Karen

    2012-02-01

    Full Text Available Abstract Background Despite educational and public health campaigns to convey the risks of indoor tanning, many individuals around the world continue to engage in this behavior. Few descriptive studies of indoor tanning have collected information pertaining to the lifetime history of indoor tanning, thereby limiting our ability to understand indoor tanning patterns and potentially target interventions for individuals who not only initiate, but continue to persistently engage in indoor tanning. Methods In-person interviews elicited detailed retrospective information on lifetime history of indoor tanning among white individuals (n = 401 under age 40 seen by a dermatologist for a minor benign skin condition. These individuals were controls in a case-control study of early-onset basal cell carcinoma. Outcomes of interest included ever indoor tanning in both males and females, as well as persistent indoor tanning in females - defined as females over age 31 who tanned indoors at least once in the last three or all four of four specified age periods (ages 11-15, 16-20, 21-30 and 31 or older. Multivariate logistic regression was used to identify sociodemographic and lifestyle correlates of ever and persistent indoor tanning in females. Results Approximately three-quarters (73.3% of females and 38.3% of males ever tanned indoors, with a median age of initiation of 17.0 and 21.5, respectively. Among indoor tanners, 39.3% of females and 21.7% of males reported being burned while indoor tanning. Female ever indoor tanners were younger, had darker color eyes, and sunbathed more frequently than females who never tanned indoors. Using unique lifetime exposure data, 24.7% of female indoor tanners 31 and older persistently tanned indoors starting as teenagers. Female persistent indoor tanners drank significantly more alcohol, were less educated, had skin that tanned with prolonged sun exposure, and sunbathed outdoors more frequently than non-persistent tanners

  5. Mood changes after indoor tanning among college women: associations with psychiatric/addictive symptoms

    Directory of Open Access Journals (Sweden)

    Carolyn Heckman

    2016-06-01

    Full Text Available Indoor tanning (IT has been linked with psychiatric and addictive symptoms, and frequent tanning may indicate tanning dependence (addiction. The current study evaluated the effects of an IT episode on mood states and the association of these effects with psychiatric and addictive symptoms among young adult female indoor tanners. One-hundred thirty-nine female university students aged 18-25 years who had indoor tanned completed an online survey including the Positive and Negative Affects Scales and a standardized psychiatric interview (the MINI International Neuropsychiatric Interview via telephone. Psychiatric and addictive symptoms were relatively common among these young adult female indoor tanners. Overall, participants reported significant decreases in both negative (upset, scared, irritable, nervous, jittery, afraid and positive (feeling interested mood states after their most recent tanning episode. Multivariable linear regression analyses showed that more frequent indoor tanning in the past month and symptoms of illicit drug use disorders were associated with decreases in negative mood, and symptoms of generalized anxiety disorder were associated with a decrease in feeling interested. In summary, indoor tanners report relatively high rates of psychiatric and substance use symptoms, including symptoms of tanning dependence, and indoor tanning appears to alter mood. Women with certain substance use and psychiatric characteristics may be more vulnerable to such mood changes after tanning indoors. Further research is needed to clarify the relationships among these variables.

  6. Envolving the Operations of the TerraSAR-X/TanDEM-X Mission Planning System during the TanDEM-X Science Phase

    OpenAIRE

    Stathopoulos, Fotios; Guillermin, Guillaume; Garcia Acero, Carlos; Reich, Karin; Mrowka, Falk

    2016-01-01

    After the successful Global Coverage of the Digital Elevation Model, the TanDEM-X Science phase was initiated in September of 2014, dedicated to the demonstration of innovative techniques and experiments. The TanDEM-X Science phase had a large impact on the TerraSAR-X/TanDEM-X Mission Planning System. The two main challenges were the formation flying changes and the activation of a new acquisition mode, the so called Dual Receive Antenna (DRA) acquisition mode. This paper describes all action...

  7. Advances in spot curing technology

    International Nuclear Information System (INIS)

    Burga, R.

    1999-01-01

    A brief review of spot curing technology was presented. The process which a spot of energy of a specific wavelength bandwidth and irradiance is used to cause a coating, encapsulant or adhesive to change from a liquid to a solid state

  8. [Therapeutic evaluation of femoral intertrochanteric fractures by InterTan].

    Science.gov (United States)

    Qin, Hui; An, Zhiquan

    2010-12-01

    To evaluate the effectiveness of InterTan in the treatment of femoral intertrochanteric fractures. Between April 2009 and July 2009, 57 patients with femoral intertrochanteric fracture were treated with InterTan. There were 33 males and 24 females with an average age of 68 years (range, 45-88 years). The locations were left side in 31 cases and right side in 26 cases and all fractures were closed fractures. According to Association for Osteosynthesis/Orthopaedic Trauma Association (AO/OTA) classification, there were 23 cases of type 31-A1, 27 of type 31-A2, and 7 of type 31-A3. The disease duration was 2 to 8 days with an average of 3.3 days. The data of operative time, blood loss, perioperative blood transfusion, hospitalization day, fracture healing time, and Harris hip score were recorded. The operative time and the blood loss were (74.5 +/- 19.7) minutes and (148.8 +/- 79.6) mL, respectively. There were significant differences in the operative time and the blood loss among the AO/OTA subgroups (P blood transfusion and the transfusion volume was (264.0 +/- 90.7) mL. The average hospitalization days were 7 days (range, 6-9 days). Thirty-five patients were followed up 12 to 15 months (13.3 months on average). X-ray films showed that all fractures healed within (2.8 +/- 0.8) months. The healing time of fracture was (2.4 +/- 0.6), (2.9 +/- 0.9), and (3.8 +/- 0.5) months in 31-A1 subgroup, 31-A2 subgroup, and 31-A3 subgroup, respectively. There was no significant difference in healing time of fracture between 31-A1 subgroup and 31-A2 subgroup (P > 0.05), and there were significant differences between 31-A3 group and 31-A1 subgroup, 31-A2 subgroup (P < 0.05). No shortening, cut-out, varus malposition, femoral shaft fracture, or implant failures was found. The Harris score at the final follow-up was 84.5 +/- 8.2 with an excellent and good rate of 80% (15 cases of excellent, 13 of good, 6 of fair, and 1 of poor). Twenty patients (57%) recovered the walking ability. The

  9. TAN Hot Shop and Support Facility Utilization Study

    International Nuclear Information System (INIS)

    Picker, B.A.

    2001-01-01

    Impacts to the U.S. Department of Energy (DOE) complex caused by early closure (prior to 2018) and Demolition and Dismantlement (D and D) of the Test Area North (TAN) hot shop and its support facilities are explored in this report. Various possible conditions, such as Standby, Safe Store and Lay-up, that the facility may be placed in prior to eventually being turned over to D and D are addressed. The requirements, impacts, and implications to the facility and to the DOE Complex are discussed for each condition presented in the report. Some details of the report reference the Idaho National Engineering and Environmental Laboratory (INEEL) Spent Nuclear Fuel Life Cycle Baseline Plan, the INEEL 2000 Infrastructure Long Range Plan, and other internal INEEL reports

  10. Radiological characterization of the TAN-IET facility

    Energy Technology Data Exchange (ETDEWEB)

    Koeppen, L.D.; Rodriguez, S.V.; Wheeler, O.A.; Cadwell, E.D.; Simpson, O.D.

    1982-06-01

    The Initial Engine Test (IET) facility is located on the Idaho National Engineering Laboratory (INEL) site at the north end of Test Area North (TAN). The IET facility was constructed and used for the Aircraft Nuclear Propulsion Program during the 1950's and was later used for two other programs: the Space Nuclear Auxiliary Power Transient (SNAP-TRAN) and the Hallam Decontamination and Decommissioning Project. The facility is no longer in use, therefore, a complete radiological characterization was conducted at the IET site. The characterization included measurements of beta-gamma dose rates; beta-gamma and alpha surface contamination; concentrations of selected radionuclides in subsurface storage tanks, surface soil, the exhaust duct, stack and test pad; and a walk-over surface survey of the entire facility. The information contained in this report will be of great value as the IET facility goes through the decommissioning and decontamination process.

  11. Boreal Forest Biomass Classification with TanDEM-X

    Science.gov (United States)

    Torano Caicoya, Astor; Kugler, Florian; Hajnsek, Irena; Papathanassiou, Kostas

    2013-08-01

    High spatial resolution X-band interferometric SAR data from TanDEM-X acquired in the operational DEM generation mode are sensitive to forest structure and can therefore be used for thematic boreal forest classification. The interferometric coherence in absence of temporal decorrelation depends strongly on forest height and structure. Due to the rather homogenous structure of boreal forest, forest biomass can be derived from forest height, on the basis of allometric equations with sufficient accuracy and can therefore, be used for thematic classification applications. Two test sites in mid- and southern Sweden are investigated. A maximum of 4 biomass classes, up to 150 Mg/ha, for a single baseline scenario and 5 biomass classes up to 250 Mg/ha for a dual baseline scenario, are achieved.

  12. A pilot study of genetic variants in dopamine regulators with indoor tanning and melanoma

    Science.gov (United States)

    Flores, Kristina G.; Erdei, Esther; Luo, Li; White, Kirsten A. M.; Leng, Shuguang; Berwick, Marianne; Lazovich, DeAnn

    2014-01-01

    Many people frequently tan indoors despite being aware of the increased risk of melanoma. Ultraviolet radiation is hypothesized to modify biological reward pathways, for example, through the dopamine neurotransmitter system, to reinforce tanning behaviour. In this pilot study, we relied on questionnaire and DNA data from a recently completed case–control study to examine 67 single-nucleotide polymorphisms (SNPs) and related haplotypes in five dopamine receptor and drug metabolism genes in relation to indoor tanning among controls. We also examined the association between individual SNPS and likelihood of melanoma, adjusting for or stratifying on indoor tanning status. In candidate and haplotype gene analyses, variants only in the DRD2 dopamine receptor and ANKK1 signalling genes were positively associated with indoor tanning use among controls; only associations for ANKK1 remained statistically significant (P < 0.05) after adjustment. Several SNPs in ANKK1 and DRD2 associated with indoor tanning among controls were also found to be associated with increased risk of melanoma. Upon stratifying for indoor tanning status, one ANKK1 SNP was positively associated with melanoma among non-tanners, while three DRD2 SNPS were positively associated with melanoma among tanners or non-tanners, depending on the SNP. These alleles represent important genomic regions to further explore addictive tanning behaviour. PMID:23947671

  13. Sun-Tanning Perceptions of a New Zealand Urban Population (1994–2005/6

    Directory of Open Access Journals (Sweden)

    A. I. Reeder

    2014-01-01

    Full Text Available Background. Sun-tanning perceptions are monitored to identify changes and help refine targeting of skin cancer prevention messages. Aim. To investigate associations between perceptions of sun-tanning and demographic factors among a New Zealand urban population, 1994–2006. Methods. A telephone survey series was conducted during summer in 1994, 1997, 1999/2000, 2002/2003, and 2005/2006. Demographic and personal information (sex, age group, skin sun-sensitivity, and self-defined ethnicity obtained from 6,195 respondents, 50.2% female, 15–69 years, was investigated in relation to six sun-tanning related statements. A total “positive perceptions of tanning” (ProTan score was also calculated. Regression analyses modelled each component and the ProTan score against survey year and respondent characteristics. Results. Statistically significantly higher ProTan scores were found for age group (strong reverse dose-response effect, male sex, residence (highest in Auckland, ethnicity (highest among Europeans, and sun sensitivity (an n-shaped association. There was no statistically significant change in total ProTan scores from baseline. Conclusions. The development, pretesting, and evaluation of messages for those groups most likely to endorse ProTan statements should be considered for the New Zealand skin cancer prevention program. To achieve and embed significant change, mass media campaigns may require greater intensity and reinforcement with sustained contextual support for settings-based behavioural change.

  14. Role of Pigments and Tannins in the Reaction of Tan and Red Near ...

    African Journals Online (AJOL)

    Sorghum (Sorghum bicolor L. Moench) plant pigments have been associated with resistance to leaf diseases and grain deterioration. Four near-isogenic pairs of tan and non-tan (red) sorghum lines were assayed for their phenolic content and evaluated for their reaction to leaf diseases along with six other sorghum lines.

  15. hPIN/hTAN: Low-Cost e-Banking Secure against Untrusted Computers

    Science.gov (United States)

    Li, Shujun; Sadeghi, Ahmad-Reza; Schmitz, Roland

    We propose hPIN/hTAN, a low-cost token-based e-banking protection scheme when the adversary has full control over the user's computer. Compared with existing hardware-based solutions, hPIN/hTAN depends on neither second trusted channel, nor secure keypad, nor computationally expensive encryption module.

  16. Lesions in DNA of hypoxic mammalian cells irradiated in the presence of TAN.

    Science.gov (United States)

    Skov, K A; Palcic, B; Skarsgard, L D

    1980-05-01

    TAN (triacetoneamine-N-oxyl) at a concentration of 10 mM gives a dose modifying factor (DMF) of 1.45 for the surviving fraction of gamma-irradiated hypoxic mammalian cells. Under the same conditions, however, TAN produces little or no enhancement of single strand breaks (SSB) in DNA (DMF congruent to 1). In this study, enhancement of the type of DNA lesions exposed by an extract of M. luteus is reported. The DMF for this type of damage (MLS) is 1.5. TAN is known to affect the size of DNA synthesized after irradiation, presumably by causing interruptions in synthesis at TAN-DNA adduct sites. The absolute number of M. luteus extract sensitive sites detected in this work corresponds to approximately on half of the number of sites of interrupted synthesis. In its sensitizing effect on DNA, the free radical TAN is different from the electron affinic drug, misonidazole.

  17. Minimization of the environmental impact of chrome tanning: a new process with high chrome exhaustion.

    Science.gov (United States)

    Morera, Josep M; Bacardit, Anna; Ollé, Lluís; Bartolí, Esther; Borràs, Maria D

    2007-11-01

    In all tanning technology operations wastes are generated. These reach the environment as residual waters, solid and liquid waste as well as atmospheric emissions and odours. This study tests an alternative method to the traditional tanning method at an industrial level. The new method is based on tanning without float and by significantly increasing the temperature at the end of the tanning process. The properties of the leathers obtained using the two methods have been compared and the results indicate that those leathers have similar physical, chemical, and organoleptic properties. However, the differences existing from the environmental point of view are significant. It is not necessary to use clean water for this tanning. Moreover, there is a 75% reduction of the residual float, a 91% reduction of the chrome discharged, and a 94% reduction of the chlorides discharged. A financial assessment was carried out to demonstrate that the newly proposed system is 32% more economic than the traditional one.

  18. Spot Welding of Honeycomb Structures

    Science.gov (United States)

    Cohal, V.

    2017-08-01

    Honeycomb structures are used to prepare meals water jet cutting machines for textile. These honeycomb structures are made of stainless steel sheet thickness of 0.1-0.2 mm. Corrugated sheet metal strips are between two gears with special tooth profile. Hexagonal cells for obtaining these strips are welded points between them. Spot welding device is three electrodes in the upper part, which carries three welding points across the width of the strip of corrugated sheet metal. Spot welding device filled with press and advance mechanisms. The paper presents the values of the regime for spot welding.

  19. Tan lejos de dios y tan cerca del New York times. Los grandes medios y el conflicto internacional

    Directory of Open Access Journals (Sweden)

    Clemencia Rodríguez

    2002-01-01

    Full Text Available En un mundo tan complejo, los medios de comunicación son las fuentes de información fundamentales. La calidad de la información que éstos nos ofrecen va a determinar nuestra visión del mundo. Sin embargo, los medios de comunicación siguen siendo banalizados y mal entendidos. Tampoco existen organismos que fiscalicen la calidad de la información internacional. Cuando se piensa en cómo prevenir o solucionar una crisis, rara vez se toma en cuenta la calidad de la información y el cubrimiento de los medios. Pero es fundamental que cambiemos esta concepción. Sólo con base en una sólida visión del conflicto desde la economía política y desde la historia pueden evitarse las interpretaciones culturales facilistas.

  20. 40 CFR 425.10 - Applicability; description of the hair pulp, chrome tan, retan-wet finishing subcategory.

    Science.gov (United States)

    2010-07-01

    ... pulp, chrome tan, retan-wet finishing subcategory. 425.10 Section 425.10 Protection of Environment... POINT SOURCE CATEGORY Hair Pulp, Chrome Tan, Retan-Wet Finish Subcategory § 425.10 Applicability; description of the hair pulp, chrome tan, retan-wet finishing subcategory. The provisions of this subpart are...

  1. 40 CFR 425.20 - Applicability; description of the hair save, chrome tan, retan-wet finish subcategory.

    Science.gov (United States)

    2010-07-01

    ... save, chrome tan, retan-wet finish subcategory. 425.20 Section 425.20 Protection of Environment... POINT SOURCE CATEGORY Hair Save, Chrome Tan, Retan-Wet Finish Subcategory § 425.20 Applicability; description of the hair save, chrome tan, retan-wet finish subcategory. The provisions of this subpart are...

  2. Predictors of Sun-Related Behaviors among Young Women: Comparisons between Outdoor Tanners, Fake Tanners, and Tan Avoiders

    Science.gov (United States)

    Day, Ashley K.; Oxlad, Melissa; Roberts, Rachel M.

    2013-01-01

    Objective: Skin cancer incidence continues to rise as a tanned appearance remains desirable, particularly among young women. Fake tanning provides a tanned appearance without exposure to ultraviolet radiation. In order to advance our understanding of the factors that contribute to long-term behavior change, this study explores determinants…

  3. The potential carcinogenic risk of tanning beds: clinical guidelines and patient safety advice

    International Nuclear Information System (INIS)

    Mogensen, Mette; Jemec, Gregor BE

    2010-01-01

    In 2009, the WHO listed ultraviolet (UV) radiation as a group 1 carcinogen. In spite of this, each year, millions of people tan indoor in Western countries. The aim of this review is to summarize evidence of tanning bed carcinogenesis and to present guidelines for use of tanning beds and patient safety advice. A narrative review of the literature was conducted based on both PubMed and Medline searches and on literature review of the retrieved papers. Use of indoor tanning beds represents a significant and avoidable risk factor for the development of both melanoma and nonmelanoma skin cancers. Frequent tanners are more often adolescent females. Tanning beds have additional potential adverse effects such as burns, solar skin damage, infection, and possibly also addictive behavior. The effort in preventing UV light-induced carcinogenesis should currently be aimed at developing new strategies for public health information. Tanning beds are one preventable source of UV radiation. In the majority of people solar UV radiation continues to be the major factor and therefore anti-tanning campaigns must always include sunbathers

  4. Youth access to indoor tanning salons in urban versus rural/suburban communities.

    Science.gov (United States)

    Nahar, Vinayak K; Rosenthal, Meagen; Lemon, Stephenie C; Kane, Kevin; Cheng, Jie; Oleski, Jessica L; Li, Wenjun; Hillhouse, Joel J; Pagoto, Sherry L

    2018-03-01

    Research suggests that youth proximity to tanning salons may promote use; however, little is known about tanning salon proximity to schools. We assessed the proximity of tanning salons to schools in urban versus rural/suburban communities across Worcester County, Massachusetts (population > 800K). To put findings in context, we compared school proximity to tanning salons to school proximity to McDonald's restaurants, a large franchise that also caters to young people. Accessibility was measured by ArcGIS 10.2 Network Analyzer (ESRI, Redlands, CA, USA) and the most current road network data layer from Massachusetts Department of Transportation (MassDOT). A total of 145 schools were observed in the study area, of which about 39% of schools were within 1 mile from a tanning salon. Urban schools (53.41%) had a higher proportion within 1 mile of a tanning salon than rural/suburban schools (17.54%; P < .001). More schools (39.31%) were within 1 mile of a tanning salon than schools within 1 mile of a McDonald's (22.70%; P < .001). Schools may be particularly impactful for implementing skin cancer prevention programing. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. Tanning and increased nevus development in very-light-skinned children without red hair.

    Science.gov (United States)

    Aalborg, Jenny; Morelli, Joseph G; Mokrohisky, Stefan T; Asdigian, Nancy L; Byers, Tim E; Dellavalle, Robert P; Box, Neil F; Crane, Lori A

    2009-09-01

    To examine the relationship between tanning and nevus development in very-light-skinned children. Prospective cohort nested within a randomized controlled trial. Skin examinations in 3 consecutive years (2004, 2005, and 2006) included full-body counts of nevi, skin color and tanning measurement using colorimetry, and hair and eye color evaluation by comparison with charts. Telephone interviews of parents provided sun exposure, sun protection, and sunburn history. Large managed-care organization and private pediatric offices in the Denver, Colorado, metropolitan area. A total of 131 very-light-skinned white children without red hair and 444 darker-skinned white children without red hair born in Colorado in 1998. Full-body nevus counts at ages 6 to 8 years. Among very-light-skinned white children, geometric mean numbers of nevi for minimally tanned children were 14.8 at age 6 years; 18.8 at age 7 years; and 22.3 at age 8 years. Mean numbers of nevi for tanned children were 21.2 at age 6 years; 27.9 at age 7 years; and 31.9 at age 8 years. Differences in nevus counts between untanned and tanned children were statistically significant at all ages (P hair and eye color, parent-reported sun exposure, and skin phototype. Among darker-skinned white children, there was no relationship between tanning and nevi. Very-light-skinned children who tan (based on objective measurement) develop more nevi than children who do not tan. These results suggest that light-skinned children who develop tans may be increasing their risk for developing melanoma later in life.

  6. 9 CFR 149.4 - Spot audit.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Spot audit. 149.4 Section 149.4... LIVESTOCK IMPROVEMENT VOLUNTARY TRICHINAE CERTIFICATION PROGRAM § 149.4 Spot audit. (a) In addition to regularly scheduled site audits, certified production sites will be subject to spot audits. (1) Random spot...

  7. Issues in the preservation of manually tanned skin materials

    Directory of Open Access Journals (Sweden)

    Torunn Klokkernes

    2008-10-01

    Full Text Available The field of conservation relates to material science and technology as a fundamental aspect to understand artefacts’ material properties and deterioration. The research performed in this study is an initial approach to the understanding of the complex nature of manually tanned skin materials manufactured by individual tradition bearers from indigenous cultures in the circumpolar area; it instigates a series of research topics which can be further addressed. Contextual interpretation comprises traditional knowledge and practices as well as the empirical information obtained through investigative and analytical methods. This requires collaboration between several areas of knowledge, and raises questions with regard to the interpretation of analytical results in the investigation of these material groups.La  conservation use de l’analyse matérielle et des technologies pour mieux comprendre les propriétés des artefacts et leurs mécanismes de dégradation. La présente recherche constitue une approche de la nature complexe des cuirs tannés au sein des cultures indigènes de la région circumpolaire. Elle suscite par ailleurs de nouveaux thèmes de recherches connexes. L’interprétation contextuelle, de son côté, englobe la connaissance des pratiques ainsi que les informations obtenues par des méthodes d’investigation analytique et exige la collaboration entre divers secteurs et disciplines.

  8. Human quadrupeds, primate quadrupedalism, and Uner Tan Syndrome.

    Directory of Open Access Journals (Sweden)

    Liza J Shapiro

    Full Text Available Since 2005, an extensive literature documents individuals from several families afflicted with "Uner Tan Syndrome (UTS," a condition that in its most extreme form is characterized by cerebellar hypoplasia, loss of balance and coordination, impaired cognitive abilities, and habitual quadrupedal gait on hands and feet. Some researchers have interpreted habitual use of quadrupedalism by these individuals from an evolutionary perspective, suggesting that it represents an atavistic expression of our quadrupedal primate ancestry or "devolution." In support of this idea, individuals with "UTS" are said to use diagonal sequence quadrupedalism, a type of quadrupedal gait that distinguishes primates from most other mammals. Although the use of primate-like quadrupedal gait in humans would not be sufficient to support the conclusion of evolutionary "reversal," no quantitative gait analyses were presented to support this claim. Using standard gait analysis of 518 quadrupedal strides from video sequences of individuals with "UTS", we found that these humans almost exclusively used lateral sequence-not diagonal sequence-quadrupedal gaits. The quadrupedal gait of these individuals has therefore been erroneously described as primate-like, further weakening the "devolution" hypothesis. In fact, the quadrupedalism exhibited by individuals with UTS resembles that of healthy adult humans asked to walk quadrupedally in an experimental setting. We conclude that quadrupedalism in healthy adults or those with a physical disability can be explained using biomechanical principles rather than evolutionary assumptions.

  9. Engaging Moms on Teen Indoor Tanning Through Social Media: Protocol of a Randomized Controlled Trial.

    Science.gov (United States)

    Pagoto, Sherry L; Baker, Katie; Griffith, Julia; Oleski, Jessica L; Palumbo, Ashley; Walkosz, Barbara J; Hillhouse, Joel; Henry, Kimberly L; Buller, David B

    2016-11-29

    Indoor tanning elevates the risk for melanoma, which is now the most common cancer in US women aged 25-29. Public policies restricting access to indoor tanning by minors to reduce melanoma morbidity and mortality in teens are emerging. In the United States, the most common policy restricting indoor tanning in minors involves parents providing either written or in person consent for the minor to purchase a tanning visit. The effectiveness of this policy relies on parents being properly educated about the harms of indoor tanning to their children. This randomized controlled trial will test the efficacy of a Facebook-delivered health communication intervention targeting mothers of teenage girls. The intervention will use health communication and behavioral modification strategies to reduce mothers' permissiveness regarding their teenage daughters' use of indoor tanning relative to an attention-control condition with the ultimate goal of reducing indoor tanning in both daughters and mothers. The study is a 12-month randomized controlled trial comparing 2 conditions: an attention control Facebook private group where content will be relevant to teen health with 25% focused on prescription drug abuse, a topic unrelated to tanning; and the intervention condition will enter participants into a Facebook private group where 25% of the teen health content will be focused on indoor tanning. A cohort of 2000 mother-teen daughter dyads will be recruited to participate in this study. Only mothers will participate in the Facebook groups. Both mothers and daughters will complete measures at baseline, end of intervention (1-year) and 6 months post-intervention. Primary outcomes include mothers' permissiveness regarding their teenage daughters' use of indoor tanning, teenage daughters' perception of their mothers' permissiveness, and indoor tanning by both mothers and daughters. The first dyad was enrolled on March 31, 2016, and we anticipate completing this study by October 2019

  10. Prevalence of Indoor Tanning and Association With Sunburn Among Youth in the United States.

    Science.gov (United States)

    Guy, Gery P; Berkowitz, Zahava; Everett Jones, Sherry; Watson, Meg; Richardson, Lisa C

    2017-05-01

    Indoor tanning and sunburns, particularly during adolescence and young adulthood, increase the risk of developing skin cancer. To examine the trends in the prevalence of indoor tanning and the association between indoor tanning and sunburn among US high school students. This study pooled and examined cross-sectional data from the 2009, 2011, 2013, and 2015 national Youth Risk Behavior Survey. During 2009, 2011, 2013, and 2015, the overall response rates were 71%, 71%, 68%, and 60%, respectively, and unweighted sample sizes were 16 410, 15 425, 13 538, and 15 624, respectively. It included nationally representative samples of US high school students. Data were collected during the spring semester (January to June) in each survey cycle beginning February 9, 2009, through June 18, 2015. Prevalence of indoor tanning in the past year from 2009 to 2015 and its association with sunburn in 2015. Among high school students in the United States, the prevalence of indoor tanning decreased from 15.6% (95% CI, 13.7%-17.6%) in 2009 to 7.3% (95% CI, 6.0%-8.9%) in 2015. Decreases in indoor tanning were found among male (from 6.7% in 2009 to 4.0% in 2015) and female (from 25.4 % in 2009 to 10.6 % in 2015) students overall, non-Hispanic white (from 21.1 % in 2009 to 9.4% in 2015) and Hispanic (from 8.2% in 2009 to 4.7% in 2015) students overall, and all age groups. Among non-Hispanic white female students, the prevalence decreased from 37.4% (95% CI, 33.6%-41.4%) in 2009 to 15.2% (95% CI, 11.7%-19.5%) in 2015. In 2015, indoor tanning was associated with sunburn in the adjusted model: 82.3% (95% CI, 77.9%-86.0%) of indoor tanners had at least 1 sunburn during the preceding year compared with 53.7% (95% CI, 48.9%-58.4%) of those who did not engage in indoor tanning (P < .001). Despite declines in the prevalence of indoor tanning from 2009 to 2015 among high school students nationwide, indoor tanning remains commonplace among certain subgroups, especially non-Hispanic white female

  11. On the origin of delta spots

    International Nuclear Information System (INIS)

    Tang, F.

    1983-01-01

    Mount Wilson sunspot drawings from 1966 through 1980 were used in conjunction with Hα filtergrams from Big Bear Solar Observatory to examine the origin of delta spots, spots with bipolar umbrae within one penumbra. Of the six cases we studied, five were formed by the union of non-paired spots. They are either shoved into one another by two neighboring growing bipoles or by a new spot born piggy-back style on an existing spot of opposite polarity. Proper motions of the growing spots take on curvilinear paths around one another to avoid a collision. This is the shear motion observed in delta spots (Tanaka, 1979). In the remaining case, the delta spot was formed by spots that emerged as a pair. Our findings indicate no intrinsic differences in the formation or the behavior between delta spots of normal magnetic configuration. (orig.)

  12. Chemical functionalization and stabilization of type I collagen with organic tanning agents

    Energy Technology Data Exchange (ETDEWEB)

    Albu, Madalina Georgiana; Deselnicu, Viorica; Ioannidis, Ioannis; Deselnicu, Dana; Chelaru, Ciprian [Leather and Footwear Research Institute, Bucharest (Romania)

    2015-02-15

    We investigated the interactions between selected organic tanning agents and type I fibrillar collagen as a model fibrillar substrate to enable the fast direct evaluation and validation of interpretations of tanning activity. Type I fibrillar collagen (1%) as gel was used as substrate of tanning and tannic acid, resorcinol- and melamine-formaldehyde and their combination at three concentrations as crosslinking agents (tannins). To evaluate the stability of collagen during tanning, the crosslinked gels at 2.8, 4.5 and 9.0 pHs were freeze-dried as discs which were characterized by FTIR, shrinkage temperature, enzymatic degradation and optical microscopy, and the results were validated by statistical analyses. The best stability was given by combinations between resorcinol- and melamine-formaldehyde at isoelectric pH.

  13. OPTIMIZATION OF COMPLEX MINERAL TANNING MATERIAL ON THE BASIS OF ALUMINIUM AND ZIRCONIUM

    Directory of Open Access Journals (Sweden)

    K. Toguzbaev

    2012-01-01

    Full Text Available Influence of acetate ion on stability of alumina-zirconium tanning to alkalization has been investigated in the paper. The investigation results have shown that at the ratio of Al3+:Zr4+:CH3COO = 1:1:1 it  is  possible  to  prepare  a  solution  of  masking   alumina-zirconium  tanning  (АЦД-М   with  high stability and low consumption of aluminum sulfate. The paper reveals that masking of alumina-zirconium tanning by natrium acetate allows to increase stability to alkalization and improve tanning properties. It has been established that for a stable increase of fatty matter viscosity and improvement of  leather water-resistant properties it is necessary to use water-insoluble aluminum and zirconium soaps of carboxylic acids.

  14. Laser based spot weld characterization

    Science.gov (United States)

    Jonietz, Florian; Myrach, Philipp; Rethmeier, Michael; Suwala, Hubert; Ziegler, Mathias

    2016-02-01

    Spot welding is one of the most important joining technologies, especially in the automotive industry. Hitherto, the quality of spot welded joints is tested mainly by random destructive tests. A nondestructive testing technique offers the benefit of cost reduction of the testing procedure and optimization of the fabrication process, because every joint could be examined. This would lead to a reduced number of spot welded joints, as redundancies could be avoided. In the procedure described here, the spot welded joint between two zinc-coated steel sheets (HX340LAD+Z100MB or HC340LA+ZE 50/50) is heated optically on one side. Laser radiation and flash light are used as heat sources. The melted zone, the so called "weld nugget" provides the mechanical stability of the connection, but also constitutes a thermal bridge between the sheets. Due to the better thermal contact, the spot welded joint reveals a thermal behavior different from the surrounding material, where the heat transfer between the two sheets is much lower. The difference in the transient thermal behavior is measured with time resolved thermography. Hence, the size of the thermal contact between the two sheets is determined, which is directly correlated to the size of the weld nugget, indicating the quality of the spot weld. The method performs well in transmission with laser radiation and flash light. With laser radiation, it works even in reflection geometry, thus offering the possibility of testing with just one-sided accessibility. By using heating with collimated laser radiation, not only contact-free, but also remote testing is feasible. A further convenience compared to similar thermographic approaches is the applicability on bare steel sheets without any optical coating for emissivity correction. For this purpose, a proper way of emissivity correction was established.

  15. Is this Red Spot the Blue Spot (locus ceruleum)?

    Energy Technology Data Exchange (ETDEWEB)

    Choe, Won Sick; Lee, Yu Kyung; Lee, Min Kyung; Hwang, Kyung Hoon [Gachon University Gil Hospital, Incheon (Korea, Republic of)

    2010-06-15

    The authors report brain images of 18F-FDG-PET in a case of schizophrenia. The images showed strikingly increased bilateral uptake in the locus ceruleum. The locus ceruleum is called the blue spot and known to be a center of the norepinephrinergic system.

  16. Astragalus friederikeanus Kit Tan & Zeitlinger (Fabaceae), a new species from south Anatolia, Turkey

    DEFF Research Database (Denmark)

    Tan, Kit; Zeitlinger, Jörg

    2007-01-01

    A new species from south Anatolia, Turkey, Astragalus friederikeanus Kit Tan & Zeitlinger (Fabaceae), is described and illustrated. The diagnostic morphological characters separating it from other members of sect. Onobrychium Boiss. are listed.......A new species from south Anatolia, Turkey, Astragalus friederikeanus Kit Tan & Zeitlinger (Fabaceae), is described and illustrated. The diagnostic morphological characters separating it from other members of sect. Onobrychium Boiss. are listed....

  17. SEMICONDUCTOR TECHNOLOGY: TaN wet etch for application in dual-metal-gate integration technology

    Science.gov (United States)

    Yongliang, Li; Qiuxia, Xu

    2009-12-01

    Wet-etch etchants and the TaN film method for dual-metal-gate integration are investigated. Both HF/HN O3/H2O and NH4OH/H2O2 solutions can etch TaN effectively, but poor selectivity to the gate dielectric for the HF/HNO3/H2O solution due to HF being included in HF/HNO3/H2O, and the fact that TaN is difficult to etch in the NH4OH/H2O2 solution at the first stage due to the thin TaOxNy layer on the TaN surface, mean that they are difficult to individually apply to dual-metal-gate integration. A two-step wet etching strategy using the HF/HNO3/H2O solution first and the NH4OH/H2O2 solution later can fully remove thin TaN film with a photo-resist mask and has high selectivity to the HfSiON dielectric film underneath. High-k dielectric film surfaces are smooth after wet etching of the TaN metal gate and MOSCAPs show well-behaved C-V and Jg-Vg characteristics, which all prove that the wet etching of TaN has little impact on electrical performance and can be applied to dual-metal-gate integration technology for removing the first TaN metal gate in the PMOS region.

  18. Improvement of Technological Properties of a Vegetal Tanning Agent in Gas Discharge Plasma

    Science.gov (United States)

    Khairullin, A. K.; Voznesensky, E. F.; Rakhmatullina, G. R.; Sabirov, A. M.; Tikhonova, N. V.

    2017-11-01

    The article considers the possibility of modification of the vegetal tanning agent quebracho in the plasma of a radio-frequency induction discharge at low pressure. It is established that plasma treatment leads to a decrease in the size of colloid fractions and a decrease in the molecular weight, while the functionality of the vegetal tanning agent is preserved. Application of the obtained product in the process of leather retanning allows improving its physical, mechanical and consumer properties.

  19. Comparison of advertising strategies between the indoor tanning and tobacco industries.

    Science.gov (United States)

    Greenman, Jennifer; Jones, David A

    2010-04-01

    The indoor tanning industry is large and continues to grow, with 2007 domestic sales in excess of $5 billion. Advertising is central to shaping the consumer's perception of indoor tanning as well as driving industry demand. This article aims to identify key drivers of consumer appeal by comparing tanning advertising strategies to those used by tobacco marketers. Tobacco advertising was selected as a reference framework because it is both well documented and designed to promote a product with known health hazards. Two thousand advertisements from 4 large tobacco advertisement databases were analyzed for type of advertisement strategy used, and 4 advertising method categories were devised to incorporate the maximum number of advertisements reviewed. Subsequently, contemporary tanning advertisements were collected from industry magazines and salon websites and evaluated relative to the identified strategy profiles. Both industries have relied on similar advertising strategies, including mitigating health concerns, appealing to a sense of social acceptance, emphasizing psychotropic effects, and targeting specific population segments. This examination is a small observational study, which was conducted without rigorous statistical analysis, and which is limited both by the number of advertisements and by advertising strategies examined. Given the strong parallels between tobacco and tanning advertising methodologies, further consumer education and investigation into the public health risks of indoor tanning is needed. Copyright 2009 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  20. Risky sun tanning behaviours amongst Irish University students: a quantitative analysis.

    Science.gov (United States)

    Flannery, C; Burke, L-A; Grainger, L; Williams, P; Gage, H

    2016-11-01

    Despite Ireland's temperate maritime climate, it has the third highest rate of malignant melanoma in the European Union, indicating the need to recognise tanning practices as a risky behaviour, especially amongst those most at risk (the younger population). To explore the factors associated with deliberate sun tanning amongst university students in Cork, Ireland. Self-reported sun exposure, attitudes to tanning and sun protection practices were investigated using an online questionnaire in April 2010. There were 833 responses (8.33 %), mean age 22 years, 75 % female. Reporting deliberate tanning in the previous summer (n = 389, 46.7 %) was positively correlated (r = 0.622, p students were significantly more likely to report these attitudes; being a current smoker was associated with reporting peer pressure and that burning is worth a tan, indicating a level of risk-taking. Respondents reported (average) three sources of information on sun risks. Tanning is a form of strongly motivated risk-taking as much in a sun-limited country like Ireland as in hotter sun-rich climates. Risk communication strategies on sun exposure should be developed that target young people and improve their risk awareness.

  1. Comparative statistical analysis of chrome and vegetable tanning effluents and their effects on related soil.

    Science.gov (United States)

    Tariq, Saadia R; Shah, Munir H; Shaheen, Nazia

    2009-09-30

    Two tanning units of Pakistan, namely, Kasur and Mian Channun were investigated with respect to the tanning processes (chrome and vegetable, respectively) and the effects of the tanning agents on the quality of soil in vicinity of tanneries were evaluated. The effluent and soil samples from 16 tanneries each of Kasur and Mian Channun were collected. The levels of selected metals (Na, K, Ca, Mg, Fe, Cr, Mn, Co, Cd, Ni, Pb and Zn) were determined by using flame atomic absorption spectrophotometer under optimum analytical conditions. The data thus obtained were subjected to univariate and multivariate statistical analyses. Most of the metals exhibited considerably higher concentrations in the effluents and soils of Kasur compared with those of Mian Channun. It was observed that the soil of Kasur was highly contaminated by Na, K, Ca and Mg emanating from various processes of leather manufacture. Furthermore, the levels of Cr were also present at much enhanced levels than its background concentration due to the adoption of chrome tanning. The levels of Cr determined in soil samples collected from the vicinity of Mian Channun tanneries were almost comparable to the background levels. The soil of this city was found to have contaminated only by the metals originating from pre-tanning processes. The apportionment of selected metals in the effluent and soil samples was determined by a multivariate cluster analysis, which revealed significant differences in chrome and vegetable tanning processes.

  2. Determining tan beta with neutral and charged Higgs bosons at a future $e^{+} e^{-}$ linear collider

    CERN Document Server

    Gunion, J F; Jiang, J; Sopczak, A; 10.1016/S0370-2693(03)00763-9

    2003-01-01

    The ratio of neutral Higgs field vacuum expectation values, tan beta , is one of the most important parameters to determine in either the minimal supersymmetric standard model (MSSM) or a general type-II two-Higgs doublet model (2HDM). Assuming an energy and integrated luminosity of square root s=500 GeV and L=2000 fb/sup -1/ at a future linear collider (LC), we show that a very accurate determination of tan beta will be possible for low and high tan beta values by measuring the production rates of Higgs bosons and reconstructing Higgs boson decays. In particular, based on a TESLA simulation, and assuming no other light Higgs bosons and 100tan beta at high tan beta . In the MSSM Higgs sector, in the sample case of m/sub A/=200 GeV, we find that the rates for e/sup +/e/sup -/ to bbA+bbH to bbbb and for e/sup +/e/sup -/ to HA to bbbb provide a good determination of tan beta at hi...

  3. Unravelling the capability of Pyrenophora phaeocomes S-1 for the production of ligno-hemicellulolytic enzyme cocktail and simultaneous bio-delignification of rice straw for enhanced enzymatic saccharification.

    Science.gov (United States)

    Rastogi, Shubhangi; Soni, Raman; Kaur, Jaspreet; Soni, Sanjeev Kumar

    2016-12-01

    A natural variant of Pyrenophora phaeocomes isolated from natural biodiversity was able to grow on various agricultural residues by co-producing laccase, xylanase and mannanase. Solid state fermentation of rice straw induced the highest productivities corresponding to 10,859.51±46.74, 22.01±1.00 and 10.45±0.128IUgds -1 for laccase, xylanase and mannanase respectively after 4days. Besides producing the ligno-hemicellulolytic enzyme cocktail, 40days cultivation of P. phaeocomes S-1 on rice straw brought about the 63 and 51% degradation of lignin and hemicellulose. These components were further removed with mild alkali extraction revealing the overall losses amounting to 78 and 60% respectively for lignin, and hemicellulose. The biologically pretreated straw upon enzymatic hydrolysis revealed 50% saccharification efficiency releasing 470mgg -1 sugars. Application of this knowledge will lead to efficient management of waste rice straw with low cost production of industrially important enzymes cocktail and its biological delignification for effective enzymatic hydrolysis to free sugars. Copyright © 2016. Published by Elsevier Ltd.

  4. Study of sunless tanning formulas using molted snake skin as an alternative membrane model.

    Science.gov (United States)

    Balogh, T S; Pedriali, C A; Gama, R M; de Oliveira Pinto, C A S; Bedin, V; Villa, R T; Kaneko, T M; Consiglieri, V O; Velasco, M V R; Baby, A R

    2011-08-01

    Sunless tanning formulas have become increasingly popular in recent years for their ability to give people convincing tans without the dangers of skin cancer. Most sunless tanners currently on the market contain dihydroxyacetone (DHA), a keto sugar with three carbons. The temporary pigment provided by these formulas is designed to resemble a UV-induced tan. This study evaluated the effectiveness of carbomer gels and cold process self emulsifying bases on skin pigmentation, using different concentrations of a chemical system composed of DHA and N-acetyl tyrosine, which are found in moulted snake skins and their effectiveness was tested by Mexameter(®) MX 18. Eight different sunless tanning formulas were developed, four of which were gels and four of which were emulsions (base, base plus 4.0%, 5.0% and 6.0% (w/w) of a system of DHA and N-acetyl tyrosine). Tests to determine the extent of artificial tanning were done by applying 30 mg cm(-2) of each formula onto standard sizes of moulted snake skin (2.0 cm × 3.0 cm). A Mexameter(®) MX 18 was used to evaluate the extent of coloration in the moulted snake skin at T(0) (before the application) and after 24, 48, 72, 168, 192 and 216 h. The moulted snake skins can be used as an alternative membrane model for in vitro sunless tanning efficacy tests due to their similarity to the human stratum corneum. The DHA concentration was found to influence the initiation of the pigmentation in both sunless tanning systems (emulsion and gel) as well as the time required to increases by a given amount on the tanning index. In the emulsion system, the DHA concentration also influenced the final value on the tanning index. The type of system (emulsion or gel) has no influence on the final value in the tanning index after 216 h for samples with the same DHA concentration. © 2011 The Authors. ICS © 2011 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

  5. The potential impact of reducing indoor tanning on melanoma prevention and treatment costs in the United States: An economic analysis.

    Science.gov (United States)

    Guy, Gery P; Zhang, Yuanhui; Ekwueme, Donatus U; Rim, Sun Hee; Watson, Meg

    2017-02-01

    Indoor tanning is associated with an increased risk of melanoma. The US Food and Drug Administration proposed prohibiting indoor tanning among minors younger than 18 years. We sought to estimate the health and economic benefits of reducing indoor tanning in the United States. We used a Markov model to estimate the expected number of melanoma cases and deaths averted, life-years saved, and melanoma treatment costs saved by reducing indoor tanning. We examined 5 scenarios: restricting indoor tanning among minors younger than 18 years, and reducing the prevalence by 20%, 50%, 80%, and 100%. Restricting indoor tanning among minors younger than 18 years was estimated to prevent 61,839 melanoma cases, prevent 6735 melanoma deaths, and save $342.9 million in treatment costs over the lifetime of the 61.2 million youth age 14 years or younger in the United States. The estimated health and economic benefits increased as indoor tanning was further reduced. Limitations include the reliance on available data and not examining compliance to indoor tanning laws. Reducing indoor tanning has the potential to reduce melanoma incidence, mortality, and treatment costs. These findings help quantify and underscore the importance of continued efforts to reduce indoor tanning and prevent melanoma. Published by Elsevier Inc.

  6. Green chemistry approaches to leather tanning process for making chrome-free leather by unnatural amino acids.

    Science.gov (United States)

    Krishnamoorthy, G; Sadulla, S; Sehgal, P K; Mandal, Asit Baran

    2012-05-15

    In the present study, green and sustainable method or eco-friendly approaches to tanning process based on unnatural D-amino acids (D-AA)-aldehyde (Ald) as a substitute for chrome-free tanning has been attempted. The distribution of optically active D-AA in tanned leather, the hydrothermal stability, the mechanical properties and resistance to collagenolytic activity of tanned leather, the evaluation of eco-friendly characteristics were investigated. Scanning electron microscopic (SEM) and Atomic force microscopic (AFM) analyses indicate the surface morphology and roughness, respectively, of the tanned leather collagen matrix. Shrinkage and Differential scanning calorimetric (DSC) analyses shows that the shrinkage temperature (T(s)) and denaturation temperature (T(d)) of tanned leather are related to the content of D-AA+Ald present in the leather matrix. It has been found that the T(s) of D-AA tanned leather is more than that of Ald tanned leather and also more or less equal to chrome tanned leather. Environmental impact assessment (EIA) shows that the developed process results in significant reduction in total solids content (TSC) and improves better biodegradability of organic compound present in the effluent compared to chrome tanning. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. Testing a social cognitive theory-based model of indoor tanning: implications for skin cancer prevention messages.

    Science.gov (United States)

    Noar, Seth M; Myrick, Jessica Gall; Zeitany, Alexandra; Kelley, Dannielle; Morales-Pico, Brenda; Thomas, Nancy E

    2015-01-01

    The lack of a theory-based understanding of indoor tanning is a major impediment to the development of effective messages to prevent or reduce this behavior. This study applied the Comprehensive Indoor Tanning Expectations (CITE) scale in an analysis of indoor tanning behavior among sorority women (total N = 775). Confirmatory factor analyses indicated that CITE positive and negative expectations were robust, multidimensional factors and that a hierarchical structure fit the data well. Social cognitive theory-based structural equation models demonstrated that appearance-oriented variables were significantly associated with outcome expectations. Outcome expectations were, in turn, significantly associated with temptations to tan, intention to tan indoors, and indoor tanning behavior. The implications of these findings for the development of messages to prevent and reduce indoor tanning behavior are discussed in two domains: (a) messages that attempt to change broader societal perceptions about tan skin, and (b) messages that focus more narrowly on indoor tanning-challenging positive expectations, enhancing negative expectations, and encouraging substitution of sunless tanning products.

  8. Green chemistry approaches to leather tanning process for making chrome-free leather by unnatural amino acids

    Energy Technology Data Exchange (ETDEWEB)

    Krishnamoorthy, G.; Sadulla, S.; Sehgal, P.K. [Central Leather Research Institute, Council of Scientific and Industrial Research (CSIR), Adyar, Chennai 600 020 (India); Mandal, Asit Baran, E-mail: abmandal@hotmail.com [Central Leather Research Institute, Council of Scientific and Industrial Research (CSIR), Adyar, Chennai 600 020 (India)

    2012-05-15

    Highlights: Black-Right-Pointing-Pointer Unnatural D-AA assisted tanned leathers found soft and full possessing tight grain. Black-Right-Pointing-Pointer Increased hydrothermal stability of collagen via intra and inter molecular crosslink. Black-Right-Pointing-Pointer D-Ly+Ald tanned leathers revealed a properly oriented with well aligned structure. Black-Right-Pointing-Pointer D-AA in collagen creates new topologies inaccessible to homo chiral molecules. Black-Right-Pointing-Pointer Improves conventional tanning process, and reduce the total solid and liquid wastes. - Abstract: In the present study, green and sustainable method or eco-friendly approaches to tanning process based on unnatural D-amino acids (D-AA)-aldehyde (Ald) as a substitute for chrome-free tanning has been attempted. The distribution of optically active D-AA in tanned leather, the hydrothermal stability, the mechanical properties and resistance to collagenolytic activity of tanned leather, the evaluation of eco-friendly characteristics were investigated. Scanning electron microscopic (SEM) and Atomic force microscopic (AFM) analyses indicate the surface morphology and roughness, respectively, of the tanned leather collagen matrix. Shrinkage and Differential scanning calorimetric (DSC) analyses shows that the shrinkage temperature (T{sub s}) and denaturation temperature (T{sub d}) of tanned leather are related to the content of D-AA+Ald present in the leather matrix. It has been found that the T{sub s} of D-AA tanned leather is more than that of Ald tanned leather and also more or less equal to chrome tanned leather. Environmental impact assessment (EIA) shows that the developed process results in significant reduction in total solids content (TSC) and improves better biodegradability of organic compound present in the effluent compared to chrome tanning.

  9. Dressing percentage in Romanian spotted breed

    Directory of Open Access Journals (Sweden)

    eleonora nistor

    2013-05-01

    Full Text Available The purpose of this research was to determine whether there are significant differences in terms of carcass weight, forequarters, hindquarters and the dressing percentage among Romanian Spotted breed steers and first generation crossbreed obtained between Romanian Spotted and Holstein at slaughter age of 12 and 17 months respectively. Study was done on Romanian Spotted breed steer aged 12 months (36 heads and 17 months (19 heads; Romanian Spotted x Holstein first generation crossbreed of aged 12 months (29 heads and 17 months (20 heads. The Romanian Spotted breed steer, show superiority in terms of carcass weight compared to crossbreed of Romanian Spotted x Holstein, therefore this breed has a better suitability for fattening for meat. Regarding dressing percentage is higher in crossbreed of Romanian Spotted x Holstein compared with Romanian Spotted breed steers, but the difference is insignificant.

  10. Dominant white spotting in the Chinese hamster.

    Science.gov (United States)

    Henwood, C; Henwood, J; Robinson, R

    1987-01-01

    An autosomal dominant white spotting mutant is described for the Chinese hamster. The mutant gene is designated as dominant spot (symbol Ds). The homozygote DsDs is a prenatal lethal while the heterozygote Ds + displays white spotting. The expression of white is variable, ranging from a white forehead spot to extensive white on the body. The venter is invariably white. Growth appears to be normal and the fertility of both sizes shows no impairment.

  11. Laser Pyrometer For Spot Temperature Measurements

    Science.gov (United States)

    Elleman, D. D.; Allen, J. L.; Lee, M. C.

    1988-01-01

    Laser pyrometer makes temperature map by scanning measuring spot across target. Scanning laser pyrometer passively measures radiation emitted by scanned spot on target and calibrated by similar passive measurement on blackbody of known temperature. Laser beam turned on for active measurements of reflectances of target spot and reflectance standard. From measurements, temperature of target spot inferred. Pyrometer useful for non-contact measurement of temperature distributions in processing of materials.

  12. Mechanisms of Low-Temperature Nitridation Technology on a TaN Thin Film Resistor for Temperature Sensor Applications.

    Science.gov (United States)

    Chen, Huey-Ru; Chen, Ying-Chung; Chang, Ting-Chang; Chang, Kuan-Chang; Tsai, Tsung-Ming; Chu, Tian-Jian; Shih, Chih-Cheng; Chuang, Nai-Chuan; Wang, Kao-Yuan

    2016-12-01

    In this letter, we propose a novel low-temperature nitridation technology on a tantalum nitride (TaN) thin film resistor (TFR) through supercritical carbon dioxide (SCCO2) treatment for temperature sensor applications. We also found that the sensitivity of temperature of the TaN TFR was improved about 10.2 %, which can be demonstrated from measurement of temperature coefficient of resistance (TCR). In order to understand the mechanism of SCCO2 nitridation on the TaN TFR, the carrier conduction mechanism of the device was analyzed through current fitting. The current conduction mechanism of the TaN TFR changes from hopping to a Schottky emission after the low-temperature SCCO2 nitridation treatment. A model of vacancy passivation in TaN grains with nitrogen and by SCCO2 nitridation treatment is eventually proposed to increase the isolation ability in TaN TFR, which causes the transfer of current conduction mechanisms.

  13. "Oh yeah, they're looking": A thematic analysis of indoor UV tanning industry advertising and articles.

    Science.gov (United States)

    Prior, Suzanne M; Rafuse, Lindsay P

    2016-02-01

    Skin cancers are becoming more prevalent even though many can be prevented. Women are more knowledgeable than men about skin cancer, yet they are more likely to sunbathe deliberately and to use artificial tanning equipment. The purpose of this article is to examine messages that women receive about the benefits of a tan. Particularly, we focused on how the indoor UV tanning industry represents the value of a tan to women. We subjected five issues of Smart Tan Canada to thematic analysis. We examined language in advertisements and articles that promote an artificial tan to women. Four themes emerged: Be Beautiful and Sexy; Look Young; Feel Better; and Science, Health, and Nature. These themes are especially effective in a culture that routinely objectifies women and places a high degree of value on their appearance. We suggest that appearance-based interventions, media literacy training, and legislation could counteract the messages in the themes.

  14. How Do Perceived Descriptive Norms Influence Indoor Tanning Intentions? An Application of the Theory of Normative Social Behavior.

    Science.gov (United States)

    Carcioppolo, Nick; Orrego Dunleavy, Victoria; Yang, Qinghua

    2017-02-01

    Indoor tanning bed use is highly influenced by perceived norms about a tanned appearance. The theory of normative social behavior (TNSB) details the many ways in which norms can impact intentions and behavior, but has never been assessed in the context of indoor tanning. Considering this, we conducted a survey among female university students (N = 274) to determine the extent to which the TNSB predicted intentions to use indoor tanning beds. Overall, the path model predicted about 46% of the variance in intentions, and the majority of significant indirect effects were witnessed through the outcome expectation variables included in the TNSB, suggesting that these may be the most salient mechanisms-as predicted by the TNSB-through which norms can impact tanning intentions. In light of these results, theoretical and practical implications are discussed, and specific recommendations are given to extend the predictive utility of the TNSB in the context of indoor tanning.

  15. News reports: update on buying indoor UV tanning with university debit cards.

    Science.gov (United States)

    Goff, Kiera L; Karimkhani, Chante; Boyers, Lindsay N; Hernandez, Melia D; Pederson, Hannah; Royer, Eryn L; Dellavalle, Robert P

    2014-12-13

    Indoor tanning by adults under 35 years of age increases the risk of developing melanoma 59% to 75%. Cost is a major barrier limiting young adults from purchasing indoor tanning services. Our recent study by Boyers et al determined that 18 of 96 major universities, all in the eastern and southern United States, had university-sponsored debit cards with indoor tanning affiliations. These debit cards, which conveniently link with student identification (ID) cards, help with student living expenses and are often loaded with money by parents. By creating agreements with indoor tanning salon vendors, universities are endorsing a World Health Organization class I carcinogen. To expand the results of our previous study, we broadened our search to further assess universities in the western United States as well as Australia, New Zealand, Ireland, Canada, and the United Kingdom. Using www.collegeboard.edu, we identified the 4 largest residential colleges in Arizona, California, Colorado, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, and Wyoming. Additionally, we investigated the top international universities, utilizing www.topuniversities.com. Internet searches, phone calls, and email correspondence were used to determine if an institution had a student ID-linked debit card. Universities with affiliations to bank debit cards and cards that could only be used on campus were excluded. In the western United States, indoor tanning merchants were affiliated with University of Arizona, Embry-Riddle Aeronautical University: Prescott Campus, and the University of Denver student debit cards. Of the original 18 schools with affiliations according to the Boyers et al study, 2 universities no longer have agreements and 5 created agreements with additional tanning salons. Of 45 universities examined in our international search, no debit cards were discovered for off-campus purchases. Therefore, the concerning issue of university associations with tanning salons appears

  16. A Drosophila wing spot test

    International Nuclear Information System (INIS)

    Ayaki, Toshikazu; Yoshikawa, Isao; Niikawa, Norio; Hoshi, Masaharu.

    1986-01-01

    A Drosophila wing spot test system was used to investigate the effects of low doses of X-rays, gamma rays, and both 2.3 and 14.1 MeV neutrons on somatic chromosome mutation (SCM) induction. The incidence of SCM was significantly increased with any type of radiation, with evident linear dose-response relationship within the range of 3 to 20 cGy. It was estimated that relative biological effectiveness value for SCM induction of 2.3 MeV neutrons to X-rays and gamma rays is much higher than that of 14.1 MeV neutrons to those photons (2.4 vs 8.0). The Drosophila wing spot test system seems to become a promising in vivo experimental method for higher animals in terms of the lack of necessity for a marvelously large number of materials required in conventional test system. (Namekawa, K.)

  17. Sweet Spots and Door Stops

    Science.gov (United States)

    Thompson, Michael; Tsui, Stella; Leung, Chi Fan

    2011-01-01

    A sweet spot is referred to in sport as the perfect place to strike a ball with a racquet or bat. It is the point of contact between bat and ball where maximum results can be produced with minimal effort from the hand of the player. Similar physics can be applied to the less inspiring examples of door stops; the perfect position of a door stop is…

  18. Combined TiN- and TaN temperature compensated thin film resistors

    International Nuclear Information System (INIS)

    Malmros, Anna; Andersson, Kristoffer; Rorsman, Niklas

    2012-01-01

    The opposite signs of the temperature coefficient of resistance (TCR) of two thin film materials, titanium nitride (TiN) and tantalum nitride (TaN), were used to form temperature compensated thin film resistors (TFRs). The principle of designing temperature compensated TFRs by connecting TFRs of each compound in series or in parallel was demonstrated. TiN, TaN, and combined TiN and TaN TFRs for monolithic microwave integrated circuits (MMICs) were fabricated by reactive sputtering. DC characterization was performed over the temperature range of 30–200 °C. The TiN TFRs exhibited an increase in resistivity with temperature with TCRs of 540 and 750 ppm/°C. The TaN TFR on the other hand exhibited a negative TCR of − 470 ppm/°C. The shunted TFRs were fabricated by serial deposition of TiN and TaN to form a bilayer component. The TCRs of the series- and shunt configurations were experimentally reduced to − 60 and 100 ppm/°C, respectively. The concept of temperature compensation was used to build a Wheatstone bridge with an application in on-chip temperature sensing.

  19. Combined TiN- and TaN temperature compensated thin film resistors

    Energy Technology Data Exchange (ETDEWEB)

    Malmros, Anna, E-mail: anna.malmros@chalmers.se; Andersson, Kristoffer; Rorsman, Niklas

    2012-01-01

    The opposite signs of the temperature coefficient of resistance (TCR) of two thin film materials, titanium nitride (TiN) and tantalum nitride (TaN), were used to form temperature compensated thin film resistors (TFRs). The principle of designing temperature compensated TFRs by connecting TFRs of each compound in series or in parallel was demonstrated. TiN, TaN, and combined TiN and TaN TFRs for monolithic microwave integrated circuits (MMICs) were fabricated by reactive sputtering. DC characterization was performed over the temperature range of 30-200 Degree-Sign C. The TiN TFRs exhibited an increase in resistivity with temperature with TCRs of 540 and 750 ppm/ Degree-Sign C. The TaN TFR on the other hand exhibited a negative TCR of - 470 ppm/ Degree-Sign C. The shunted TFRs were fabricated by serial deposition of TiN and TaN to form a bilayer component. The TCRs of the series- and shunt configurations were experimentally reduced to - 60 and 100 ppm/ Degree-Sign C, respectively. The concept of temperature compensation was used to build a Wheatstone bridge with an application in on-chip temperature sensing.

  20. Teens, Tweets, and Tanning Beds: Rethinking the Use of Social Media for Skin Cancer Prevention

    Science.gov (United States)

    Falzone, Ashley E.; Brindis, Claire D.; Chren, Mary-Margaret; Junn, Alexandra; Pagoto, Sherry; Wehner, Mackenzie; Linos, Eleni

    2018-01-01

    The incidence of skin cancer is rising in the U.S., and melanoma, the deadliest form, is increasing disproportionately among young white women. Indoor tanning is a modifiable risk factor for all skin cancers and continues to be used at the highest rates in young white women. Adolescents and young adults report personal appearance–based reasons for using indoor tanning. Previous research has explored the influences on tanning bed use, including individual factors as well as relationships with peers, family, schools, media influences, legislation, and societal beauty norms. Adolescents and young adults also have high rates of social media usage, and research is emerging on how best to utilize these platforms for prevention. Social media has the potential to be a cost-effective way to reach large numbers of young people and target messages at characteristics of specific audiences. Recent prevention efforts have shown that comprehensive prevention campaigns that include technology and social media are promising in reducing rates of indoor tanning among young adults. This review examines the literature on psychosocial influences on indoor tanning among adolescents and young adults, and highlights ways in which technology and social media can be used for prevention efforts. PMID:28818251

  1. Teens, Tweets, and Tanning Beds: Rethinking the Use of Social Media for Skin Cancer Prevention.

    Science.gov (United States)

    Falzone, Ashley E; Brindis, Claire D; Chren, Mary-Margaret; Junn, Alexandra; Pagoto, Sherry; Wehner, Mackenzie; Linos, Eleni

    2017-09-01

    The incidence of skin cancer is rising in the U.S., and melanoma, the deadliest form, is increasing disproportionately among young white women. Indoor tanning is a modifiable risk factor for all skin cancers and continues to be used at the highest rates in young white women. Adolescents and young adults report personal appearance-based reasons for using indoor tanning. Previous research has explored the influences on tanning bed use, including individual factors as well as relationships with peers, family, schools, media influences, legislation, and societal beauty norms. Adolescents and young adults also have high rates of social media usage, and research is emerging on how best to utilize these platforms for prevention. Social media has the potential to be a cost-effective way to reach large numbers of young people and target messages at characteristics of specific audiences. Recent prevention efforts have shown that comprehensive prevention campaigns that include technology and social media are promising in reducing rates of indoor tanning among young adults. This review examines the literature on psychosocial influences on indoor tanning among adolescents and young adults, and highlights ways in which technology and social media can be used for prevention efforts. Copyright © 2017 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  2. A Cross-Sectional Study of Indoor Tanning in Fitness Centres.

    Science.gov (United States)

    Huang, Christina M; Kirchhof, Mark G

    Ultraviolet (UV) radiation is a human carcinogen and is associated with the development of skin cancer. The promotion of indoor tanning (IT) at fitness centres is of particular concern as it reinforces the idea that a tan is associated with health and fitness. The purpose of this study was to investigate the prevalence of IT in fitness centres, with an emphasis on determining the financial costs, adherence to regulations, and safety precautions. Ten cities, representing 9 different Canadian provinces, were chosen for the study. From each province, a minimum of 20 and a maximum of 30 fitness centres were randomly selected from the Yellow Pages website. Each fitness centre was contacted by the principal investigator and inquiries were made from a consumer's perspective. Of the 203 gyms surveyed, 43% (88/203) offered tanning facilities. Of these, 10.23% (9/88) were found to be noncompliant with the provincial IT regulations for age and/or time between tanning sessions. Despite the known risks of IT, not all fitness centres are compliant with provincial legislations regarding IT, and some continue to promote tanning access to minors.

  3. Justifications shape ethical blind spots.

    Science.gov (United States)

    Pittarello, Andrea; Leib, Margarita; Gordon-Hecker, Tom; Shalvi, Shaul

    2015-06-01

    To some extent, unethical behavior results from people's limited attention to ethical considerations, which results in an ethical blind spot. Here, we focus on the role of ambiguity in shaping people's ethical blind spots, which in turn lead to their ethical failures. We suggest that in ambiguous settings, individuals' attention shifts toward tempting information, which determines the magnitude of their lies. Employing a novel ambiguous-dice paradigm, we asked participants to report the outcome of the die roll appearing closest to the location of a previously presented fixation cross on a computer screen; this outcome would determine their pay. We varied the value of the die second closest to the fixation cross to be either higher (i.e., tempting) or lower (i.e., not tempting) than the die closest to the fixation cross. Results of two experiments revealed that in ambiguous settings, people's incorrect responses were self-serving. Tracking participants' eye movements demonstrated that people's ethical blind spots are shaped by increased attention toward tempting information. © The Author(s) 2015.

  4. Resistance Spot Welding of dissimilar Steels

    Directory of Open Access Journals (Sweden)

    Ladislav Kolařík

    2012-01-01

    Full Text Available This paper presents an analysis of the properties of resistance spot welds between low carbon steel and austenitic CrNi stainless steel. The thickness of the welded dissimilar materials was 2 mm. A DeltaSpot welding gun with a process tape was used for welding the dissimilar steels. Resistance spot welds were produced with various welding parameters (welding currents ranging from 7 to 8 kA. Light microscopy, microhardness measurements across the welded joints, and EDX analysis were used to evaluate the quality of the resistance spot welds. The results confirm the applicability of DeltaSpot welding for this combination of materials.

  5. Trends in tans and skin protection in Australian fashion magazines, 1982 through 1991.

    Science.gov (United States)

    Chapman, S; Marks, R; King, M

    1992-01-01

    We rated 3971 photographs of models from midsummer editions of six Australian fashion magazines from 1982-1983 to 1990-1991 for tan on a 9-point scale, for the presence of hats, for sun-protective clothing, and for shade setting. With the exception of the 1990-1991 sample, there was an increasing proportion of light tans over the years. Men were more likely to be deeply tanned than were women. The proportion of models wearing hats followed an increasing linear trend across the five periods. Three quarters of the outdoor photographs were taken in unshaded settings. In unshaded settings, 17% of the women and 5% of the men wore hats. PMID:1456348

  6. Proposing and evaluating applications for products obtained during chromium chip alkaline hydrolysis produced during leather tanning

    Directory of Open Access Journals (Sweden)

    Andrea Díaz

    2006-09-01

    Full Text Available Some applications for products obtained by chromium chip alkaline hydrolysis produced during leather tanning were evaluated in this work, considering the concept of maximising tanneries’ solid residue reuse for different industrial applications and minimising the environmental impact so produced. When Cr(OH is transformed into Cr (OH(SO it can be used in tanning leather (i.e. as tanning salt. When compared to commercial salts, 2 4 it was determined that it could be applied to mixtures containing this salt, replacing it by up to 40%. Chromium content reduction was evaluated for collagen hydrolyzate by pH control after alkaline hydrolysis of the chips and by applying adsorbent materials such as bentonite, alfalfa and sorghum biomass and activated charcoal, a maximum 55% Cr removal being obtained when the first two adsorbent materials were used.

  7. High chrome exhaustion in a non-float tanning process using a sulphonic aromatic acid.

    Science.gov (United States)

    Bacardit, Anna; Morera, Josep M; Ollé, Lluís; Bartolí, Esther; Dolors Borràs, M

    2008-10-01

    Tanning processes performed in drums consume large amounts of water and chemicals, most of which end up in the wastewater. This study explores an alternative approach at an industrial scale to the traditional pickle-chrome tanning method. The new method replaces formic and sulphuric acids with sulphonic aromatic acid. Because it is done without float, there is a sizeable reduction in the amount of added salt and chrome salt as well as an increase in temperatures at the end of the tanning process. From an environmental perspective, the new method offers important advantages. For instance, there is no float addition in the tannage. Also, there are reductions of 94% and 99%, respectively, in the discharge of chlorides and chrome, as well as a 75% reduction in the residual float. Our financial assessment demonstrated that the new method is 42% cheaper than a traditional approach.

  8. ESA uncovers Geminga's `hot spot'

    Science.gov (United States)

    2004-07-01

    16 July 2004 Astronomers using ESA’s X-ray observatory XMM-Newton have detected a small, bright ‘hot spot’ on the surface of the neutron star called Geminga, 500 light-years away. The hot spot is the size of a football field and is caused by the same mechanism producing Geminga’s X-ray tails. This discovery identifies the missing link between the X-ray and gamma-ray emission from Geminga. hi-res Size hi-res: 1284 kb Credits: ESA, P. Caraveo (IASF, Milan) Geminga's hot spot This figure shows the effects of charged particles accelerated in the magnetosphere of Geminga. Panel (a) shows an image taken with the EPIC instrument on board the XMM-Newton observatory. The bright tails, made of particles kicked out by Geminga’s strong magnetic field, trail the neutron star as it moves about in space. Panel (b) shows how electrically charged particles interact with Geminga’s magnetic field. For example, if electrons (blue) are kicked out by the star, positrons (in red) hit the star’s magnetic poles like in an ‘own goal’. Panel (c) illustrates the size of Geminga’s magnetic field (blue) compared to that of the star itself at the centre (purple). The magnetic field is tilted with respect to Geminga’s rotation axis (red). Panel (d) shows the magnetic poles of Geminga, where charged particles hit the surface of the star, creating a two-million degrees hot spot, a region much hotter than the surroundings. As the star spins on its rotation axis, the hot spot comes into view and then disappears, causing the periodic colour change seen by XMM-Newton. An animated version of the entire sequence can be found at: Click here for animated GIF [low resolution, animated GIF, 5536 KB] Click here for AVI [high resolution, AVI with DIVX compression, 19128 KB] hi-res Size hi-res: 371 kb Credits: ESA, P. Caraveo (IASF, Milan) Geminga's hot spot, panel (a) Panel (a) shows an image taken with the EPIC instrument on board the XMM-Newton observatory. The bright tails, made of

  9. La riqueza y la pobreza de las naciones. ¿Por qué algunas son tan ricas y otras tan pobres?

    Directory of Open Access Journals (Sweden)

    Abel Ignacio López

    2001-01-01

    Full Text Available Landes, David. La riqueza y la pobreza de las naciones. ¿Por qué algunas son tan ricas y otras son tan pobres?, Barcelona, Editorial Crítica, 1999, 604 páginas. ¿Porqué hay naciones pobres y naciones ricas y cuál es la contribución de la historia en la comprensión de esta cuestión? El autor entiende por cultura el espíritu de empresa, el conjunto de valores que guían la conducta de una población, el dominio de la ciencia, la tecnología y el espíritu racional.

  10. Skin deep: Coverage of skin cancer and recreational tanning in Canadian women's magazines (2000-2012).

    Science.gov (United States)

    McWhirter, Jennifer E; Hoffman-Goetz, Laurie

    2015-06-18

    Skin cancer is a significant public health problem among Canadians. Knowledge and attitudes about health are informed by mass media. The aim of our study was to describe the volume and nature of coverage of skin cancer and recreational tanning in Canadian women's magazines. Directed content analysis on article text and images in six popular Canadian women's magazines (Chatelaine, Canadian Living, Homemakers, Flare, FASHION, ELLE Canada) from 2000-2012 with attention to risk factors, ultraviolet radiation (UV) exposure and protection behaviours, and early detection. Six popular American women's magazines were used for a between-country comparison. There were 154 articles (221 images) about skin cancer and tanning published over 13 years. Volume of coverage did not increase in a linear fashion over time. The most common risk factor reported on was UV exposure (39%), with other risk factors less frequently identified. Although 72% of articles promoted sunscreen use, little content encouraged other protection behaviours. Only 15% of articles and 1% of images discouraged indoor tanning, while 41% of articles and 53% of images promoted the tanned look as attractive. Few articles (<11%) reported on early detection. Relative to American magazines, Canadian magazines had a greater proportion of content that encouraged sunscreen use and promoted the tanned look and a lesser proportion of content on risk factors and early detection. Skin cancer and tanning messages in Canadian women's magazines had a narrow focus and provided limited information on risk factors or screening. Conflicting messages about prevention (text vs. images) may contribute to harmful UV behaviours among Canadian women.

  11. Watermarking spot colors in packaging

    Science.gov (United States)

    Reed, Alastair; Filler, TomáÅ.¡; Falkenstern, Kristyn; Bai, Yang

    2015-03-01

    In January 2014, Digimarc announced Digimarc® Barcode for the packaging industry to improve the check-out efficiency and customer experience for retailers. Digimarc Barcode is a machine readable code that carries the same information as a traditional Universal Product Code (UPC) and is introduced by adding a robust digital watermark to the package design. It is imperceptible to the human eye but can be read by a modern barcode scanner at the Point of Sale (POS) station. Compared to a traditional linear barcode, Digimarc Barcode covers the whole package with minimal impact on the graphic design. This significantly improves the Items per Minute (IPM) metric, which retailers use to track the checkout efficiency since it closely relates to their profitability. Increasing IPM by a few percent could lead to potential savings of millions of dollars for retailers, giving them a strong incentive to add the Digimarc Barcode to their packages. Testing performed by Digimarc showed increases in IPM of at least 33% using the Digimarc Barcode, compared to using a traditional barcode. A method of watermarking print ready image data used in the commercial packaging industry is described. A significant proportion of packages are printed using spot colors, therefore spot colors needs to be supported by an embedder for Digimarc Barcode. Digimarc Barcode supports the PANTONE spot color system, which is commonly used in the packaging industry. The Digimarc Barcode embedder allows a user to insert the UPC code in an image while minimizing perceptibility to the Human Visual System (HVS). The Digimarc Barcode is inserted in the printing ink domain, using an Adobe Photoshop plug-in as the last step before printing. Since Photoshop is an industry standard widely used by pre-press shops in the packaging industry, a Digimarc Barcode can be easily inserted and proofed.

  12. The Impact of Parental Knowledge and Tanning Attitudes on Sun Protection Practice for Young Children in Germany

    Directory of Open Access Journals (Sweden)

    Olaf Gefeller

    2014-05-01

    Full Text Available Public health campaigns have improved knowledge on UVR-associated skin cancer risk and increased sun protection awareness. However, tanned skin is still a common beauty ideal. The relationship between knowledge, attitudes and protective behavior is not fully understood yet. A population-based survey was thus performed in the district of Erlangen involving 2,619 parents of 3- to 6-year old children. By means of a self-administered standardized questionnaire parental knowledge about risk factors for skin cancer, their attitudes towards tanning and details of protective measures taken for their children were assessed. The study analyzed specifically the impact of parental tanning attitudes on sun-protective measures for their children while controlling for parental knowledge about skin cancer risk factors. While parental knowledge was significantly (inversely associated with agreement to the statement “Tanned skin is healthy skin”, this was not the case for “Tanning makes me look better”. Overall, tanning affirmative attitudes were inversely associated with protective measures taken for the children, whereas parental knowledge had a positive impact on sun protection at the beach only. Multivariable analyses provided evidence for an effect of parental attitude on protective behavior independent of parental knowledge. Tanning attitudes and tanned skin as the misguided ideal of beauty need to be addressed in future public health campaigns to enhance the effectiveness of preventive activities in changing sun protective behavior.

  13. Analysis of the effects of postulated pipe breaks on the LOFT containment building and on building TAN 650

    Energy Technology Data Exchange (ETDEWEB)

    Mosby, W.R.

    1978-08-31

    This report presents the results of analyses of the consequences of pipe whips and jets occurring as a result of pipe breaks postulated to occur in the LOFT main steam and feedwater lines both inside and adjacent to the LOFT Containment Vessel and Building TAN 650. Pipe whip and jet cases resulting in breach of containment or damage to Building TAN 650 are identified.

  14. Changes in Sun Tanning Attitudes and Behaviors of U.S. College Students from 1995 to 2005

    Science.gov (United States)

    Pettijohn, Terry F., II; Pettijohn, Terry F.; Geschke, Kaela S.

    2009-01-01

    To investigate changes in U.S. college student sun tanning attitudes and behaviors over the last decade, participants completed sun tanning attitude and behavior surveys in 1995 (n=151) and a different sample of participants completed surveys in 2005 (n=208). Consistent with predictions, results indicated that college students were more likely to…

  15. Oil futures and spot markets

    International Nuclear Information System (INIS)

    Samii, M.V.

    1992-01-01

    In the last decade, the oil futures market has risen to prominence and has become a major factor in influencing oil market psychology and the crude oil market. On a normal day, over 92 thousand contracts, the equivalent of 92 million barrels per day, change hands on the New York Mercantile Exchange, NYMEX. This market has provided a vehicle for hedging against risk. At the same time, it has also created opportunities for speculation. Those who previously were unable to participate in oil market transactions can now become involved through the futures market. The large number of participants in the future market and the availability of information has made this market more efficient and transparent, relative to the crude oil market. While there has been considerable in-depth analysis of other future markets, relatively little theoretical attention has focused on that of oil. This paper looks at the following issues. First, what is the relationship between futures and spot oil prices? And secondly, are futures prices a good predictor of spot crude prices in the future? (author)

  16. Integrating sustainable hunting in biodiversity protection in Central Africa: hot spots, weak spots, and strong spots.

    Directory of Open Access Journals (Sweden)

    John E Fa

    Full Text Available Wild animals are a primary source of protein (bushmeat for people living in or near tropical forests. Ideally, the effect of bushmeat harvests should be monitored closely by making regular estimates of offtake rate and size of stock available for exploitation. However, in practice, this is possible in very few situations because it requires both of these aspects to be readily measurable, and even in the best case, entails very considerable time and effort. As alternative, in this study, we use high-resolution, environmental favorability models for terrestrial mammals (N = 165 in Central Africa to map areas of high species richness (hot spots and hunting susceptibility. Favorability models distinguish localities with environmental conditions that favor the species' existence from those with detrimental characteristics for its presence. We develop an index for assessing Potential Hunting Sustainability (PHS of each species based on their ecological characteristics (population density, habitat breadth, rarity and vulnerability, weighted according to restrictive and permissive assumptions of how species' characteristics are combined. Species are classified into five main hunting sustainability classes using fuzzy logic. Using the accumulated favorability values of all species, and their PHS values, we finally identify weak spots, defined as high diversity regions of especial hunting vulnerability for wildlife, as well as strong spots, defined as high diversity areas of high hunting sustainability potential. Our study uses relatively simple models that employ easily obtainable data of a species' ecological characteristics to assess the impacts of hunting in tropical regions. It provides information for management by charting the geography of where species are more or less likely to be at risk of extinction from hunting.

  17. In vitro/in vivo and analytical evaluation of sunless tanning formulations containing different rheology modifiers.

    Science.gov (United States)

    Dueva-Koganov, Olga V; Mandalia, Yamini; Brito, Juan; Rocafort, Colleen; Orofino, Steven; Vazquez, Gustavo

    2010-01-01

    In vitro data suggest that different in vivo performances are expected for two dihydroxyacetone (DHA)-containing formulations with similar concentrations of DHA and excipients but different commercially available rheology modifiers: one with a cationic polymer-based rheology modifier (blend) [dimethylacrylamide/ethyltrimonium chloride methacrylate copolymer (and) propylene glycol dicaprylate/dicaprate (and) PPG-1 trideceth-6 (and) C10-11 isoparaffin]; and the other with a polyacrylamide-based rheology modifier (blend) [polyacrylamide (and) C13-14 isoparaffin (and) laureth-7]. Both rheology modifiers (blends) contained comparable levels of polymers and were used at 3% w/w (as supplied). Differences in color development were illustrated in vitro with respect to the yellow/red and lightness/chroma parameters, which were confirmed in the followup in vivo studies. The test article with the cationic polymer-based rheology modifier produced a more natural sunless tan, comparable to a desirable sun-induced tan, for all panelists, one that was more uniform and lasted longer compared with the sunless tan generated by the test article with the polyacrylamide-based rheology modifier. A method for HPLC analysis of DHA in sunless tanning formulations was established and utilized to confirm concentrations of DHA in test articles.

  18. 77 FR 43157 - Disregarded Entities and the Indoor Tanning Services Excise Tax; Correction

    Science.gov (United States)

    2012-07-24

    ... Disregarded Entities and the Indoor Tanning Services Excise Tax; Correction AGENCY: Internal Revenue Service... tax. DATES: This correction is effective on July 24, 2012, and applies on and after June 25, 2012. FOR... Subjects in 26 CFR Part 301 Employment taxes, Estate taxes, Excise taxes, Gift taxes, Income taxes...

  19. Determination of total chromium in tanned leather samples used in car industry.

    Science.gov (United States)

    Zeiner, Michaela; Rezić, Iva; Ujević, Darko; Steffan, Ilse

    2011-03-01

    Despite the high competition of synthetic fibers leather is nowadays still widely used for many applications. In order to ensure a sufficient stability of the skin matrix against many factors, such as microbial degradation, heat and sweat, a tanning process is indispensable. Using chromium (III) for this purpose offers a multitude of advantages, thus this way of tanning is widely applied. During the use of chromium tanned leather as clothing material as well as for decoration/covering purposes, chromium is extracted from the leather and may then cause nocuous effects to human skin, e.g. allergic reactions. Thus the knowledge of the total chromium content of leather samples expected to come into prolonged touch with human skin is very important. In car industry leather is used as cover for seats, steering wheel and gearshift lever The chromium contents often chromium tanned leather samples used in car industry were determined. First all samples were dried at 65 degrees C overnight and then cut in small pieces using a ceramic knife, weighed and analyzed by inductively coupled plasma--optical emission spectrometry (ICP-OES) after acidic microwave assisted digestion. The total chromium amounts found were in the range from 19 mg/g up to 32 mg/g. The extraction yield of chromium from leather samples in sweat is approximately 2-7%. Thus especially during long journeys in summer chromium can be extracted in amounts which may cause nocuous effects for example on the palm of the hands or on the back.

  20. Click chemistry approach to conventional vegetable tanning process: accelerated method with improved organoleptic properties.

    Science.gov (United States)

    Krishnamoorthy, Ganesan; Ramamurthy, Govindaswamy; Sadulla, Sayeed; Sastry, Thotapalli Parvathaleswara; Mandal, Asit Baran

    2014-09-01

    Click chemistry approaches are tailored to generate molecular building blocks quickly and reliably by joining small units together selectively and covalently, stably and irreversibly. The vegetable tannins such as hydrolyzable and condensed tannins are capable to produce rather stable radicals or inhibit the progress of radicals and are prone to oxidations such as photo and auto-oxidation, and their anti-oxidant nature is well known. A lot remains to be done to understand the extent of the variation of leather stability, color variation (lightening and darkening reaction of leather), and poor resistance to water uptake for prolonged periods. In the present study, we have reported click chemistry approaches to accelerated vegetable tanning processes based on periodates catalyzed formation of oxidized hydrolysable and condensed tannins for high exhaustion with improved properties. The distribution of oxidized vegetable tannin, the thermal stability such as shrinkage temperature (T s) and denaturation temperature (T d), resistance to collagenolytic activities, and organoleptic properties of tanned leather as well as the evaluations of eco-friendly characteristics were investigated. Scanning electron microscopic analysis indicates the cross section of tightness of the leather. Differential scanning calorimetric analysis shows that the T d of leather is more than that of vegetable tanned or equal to aldehyde tanned one. The leathers exhibited fullness, softness, good color, and general appearance when compared to non-oxidized vegetable tannin. The developed process benefits from significant reduction in total solids and better biodegradability in the effluent, compared to non-oxidized vegetable tannins.

  1. Measurements in SUGRA Models with Large $\\tan\\beta$ at LHC

    CERN Document Server

    Hinchliffe, Ian

    1999-01-01

    We present an example of a scenario of particle production and decay in supersymmetry models in which the supersymmetry breaking is transmitted to the observable world via gravitational interactions. The case is chosen so that there is a large production of tau leptons in the final state. It is characteristic of large $\\tan\\beta$ that decays into muons and electrons may be supressed.

  2. Effects of dehydration methods on characteristics of fibrous networks from un-tanned hides

    Science.gov (United States)

    To improve prospective markets and to secure a viable future for the hides and leather industries, it is important to develop new uses and novel biobased products from hides. We hypothesize collagen fiber networks derived from un-tanned hides can be utilized to prepare high performance green compos...

  3. Effects of dehydration methods on the characteristics of fibrous networks from un-tanned hides

    Science.gov (United States)

    To improve prospective markets and to secure a viable future for the hides and leather industries, it is important to develop new uses and novel biobased products from hides. We hypothesize collagen fiber networks derived from un-tanned hides can be utilized to prepare high performance green compos...

  4. The Power of Interconnectivity: Tan Sitong's Invention of Historical Agency in Late Qing China

    Directory of Open Access Journals (Sweden)

    Hung-yok Ip

    2015-02-01

    Full Text Available To explore how Chinese Buddhists acted as trailblazers of Engaged Buddhism, I shall analyze a late nineteenth-century thinker, Tan Sitong 譚嗣同 (1865–1898. The focus of my analysis is his masterpiece, Renxue 仁學. From his position of Buddhist eclecticism, Tan discoursed at length on non-differentiation as the truth of the universe to reflect on the creative disposition of human agency. He described in Renxue how this disposition would contribute to the agendas defining Chinese modernity. In addition, discussing the meanings of non-differentiation, Tan also generalized about the nature of the human agency he attempted to advocate: while he perceived the human agency blessed with a non-differentiating mindset as an omnipotent history-making force, he also argued that it did not confer upon its owner the status of world savior. In fact, in his view, the efficacy of a non-differentiating mind was determined by the world it aimed to help. Tan's signature piece, I argue, provides a lens through which we can observe modern Chinese Buddhism's role as an important part of the global formation of Engaged Buddhism.

  5. 78 FR 27117 - General and Plastic Surgery Devices: Reclassification of Ultraviolet Lamps for Tanning...

    Science.gov (United States)

    2013-05-09

    ... can produce Vitamin D (Ref. 4), but to date, it is unclear whether the benefit of such production... skin cell damage (Ref. 32). UV irradiation inhibits the production of collagen precursor molecules such..., 1994. 40. Berwick, M., ``Are Tanning Beds 'Safe'? Human Studies of Melanoma,'' Pigment Cell & Melanoma...

  6. Adapting vat dye as an alternate dyeing agent for vegetable tanned ...

    African Journals Online (AJOL)

    The research explores the use of vat dye, a selected dye that is available locally in the Ghanaian market in large quantities, with varied colour ranges to identify their suitability as effective colourants on vegetable tanned leather. Four different experiments were performed with vat dye, and two others were tried with suede ...

  7. TanDEM-X the Earth surface observation project from space level - basis and mission status

    Directory of Open Access Journals (Sweden)

    Jerzy Wiśniowski

    2015-03-01

    Full Text Available TanDEM-X is DLR (Deutsches Zentrum für Luft- und Raumfahrt the Earth surface observation project using high-resolution SAR interferometry. It opens a new era in space borne radar remote sensing. The system is based on two satellites: TerraSAR-X (TSX and TanDEM-X (TDX flying on the very close, strictly controlled orbits. This paper gives an overview of the radar technology and overview of the TanDEM-X mission concept which is based on several innovative technologies. The primary objective of the mission is to deliver a global digital elevation model (DEM with an unprecedented accuracy, which is equal to or surpass the HRTI-3 specifications (12 m posting, relative height accuracy ±2 m for slope < 20% and ±4 m for slope > 20% [8]. Beyond that, TanDEM-X provides a highly reconfigurable platform for the demonstration of new radar imaging techniques and applications.[b]Keywords[/b]: remote sensing, Bistatic SAR, digital elevation model (DEM, Helix formation, SAR interferomery, HRTI-3, synchronization

  8. Impact of sheep and goats ectoparasites on the tanning industry in ...

    African Journals Online (AJOL)

    Impact of sheep and goats ectoparasites on the tanning industry in Tigray. Region, Ethiopia. 1Hagos ... The small ruminant population of Tigray Region is estimated to be 1,022,779 sheep and 1,588,779 goats. ..... Sheba tannery belong to small, medium, large and extra large sizes, respectively. Considering the proportion ...

  9. TanZamBo Capacity Building for HIV Prevention Research Network ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This grant will support the development of HIV/AIDS prevention trial expertise in Botswana, Tanzania and Zambia using existing collaborations between Africa, Canada and the United States. The Botswana-Tanzania-Zambia Capacity Building Network (TanZamBo) is composed of two African institutions with fairly well ...

  10. Chrome Tanning Leather of Giant Sea Perch Combined with Seed Extract Areca Nut on the Physical Characteristics

    Directory of Open Access Journals (Sweden)

    Bustami - Ibrahim

    2014-11-01

    Full Text Available Tanning is the process of converting raw hide protein to leather, which are stable, not easily decompose, and is suitable for a variety of uses. The use of vegetable based tanning materials in the leather tanning process has not been carried out. Vegetable based materials that were used are betel nuts. This plant contains tannin which is the main agent in the process of leather tanning. The aim of this study was to determine the physical characteristics of snapper leather treated with betel nut extract. Soxhlet extracting method with methanol as a solvent were used to obtain tannin from betel nuts. Tanned Snapper Leather were analyzed for physical quality, elongation strength, tensile strength, tear strength, and sewing strength. The result showed that methanol extracted betel nut with 10% concentration gives the optimum physical characteristics.Keywords: areca nut, chrome, snapper, snapper

  11. Compositional analysis and physicochemical and mechanical testing of tanned rabbit skins

    Directory of Open Access Journals (Sweden)

    M.L. R. Sousa

    2016-09-01

    Full Text Available Chemical composition and physicochemical and mechanical parameters of New Zealand White rabbit tanned skin were evaluated. Skin samples from 70-d-old males, in natura and semi-finished, were collected for evaluation. The in natura treatment comprise skins without any processing, while semi-finished treatment comprise skins after soaking, fleshing, liming, de-liming, purging, degreasing, pickling, tanning, neutralising, re-tanning and dyeing, followed by oiling, drying, stretching and softening. After tanning, samples from the dorsal and flank regions were removed for tensile and physicochemical testing in the longitudinal and transverse directions. A split plot design was used with plot treatments (leather regions: R1=dorsal and R2=flank and subplots directions (S1=longitudinal and S2=transversal, using 10 examples per treatment. At the end of processing, the leather analysis revealed low moisture (31.76%, protein (46.48% and fat content (24.95%, and a high ash content (8.58%. Leather presented a pH of 4.9 and contained 2.0% chromium oxide, 25.5% extractable substances in dichloromethane, and these characteristics were coupled with a higher tensile strength (10.84 N/mm2 in the dorsal region. However, samples in the same region proved to have higher elasticity (64.57% in the longitudinal direction, although there was no difference in the progressive tearing analysis (21.07-23.50 N/mm. Overall, our analyses suggest that, in this case, the tanned leather product does not have sufficient resistance for application in clothing production.

  12. Accuracy assessment of the global TanDEM-X Digital Elevation Model with GPS data

    Science.gov (United States)

    Wessel, Birgit; Huber, Martin; Wohlfart, Christian; Marschalk, Ursula; Kosmann, Detlev; Roth, Achim

    2018-05-01

    The primary goal of the German TanDEM-X mission is the generation of a highly accurate and global Digital Elevation Model (DEM) with global accuracies of at least 10 m absolute height error (linear 90% error). The global TanDEM-X DEM acquired with single-pass SAR interferometry was finished in September 2016. This paper provides a unique accuracy assessment of the final TanDEM-X global DEM using two different GPS point reference data sets, which are distributed across all continents, to fully characterize the absolute height error. Firstly, the absolute vertical accuracy is examined by about three million globally distributed kinematic GPS (KGPS) points derived from 19 KGPS tracks covering a total length of about 66,000 km. Secondly, a comparison is performed with more than 23,000 "GPS on Bench Marks" (GPS-on-BM) points provided by the US National Geodetic Survey (NGS) scattered across 14 different land cover types of the US National Land Cover Data base (NLCD). Both GPS comparisons prove an absolute vertical mean error of TanDEM-X DEM smaller than ±0.20 m, a Root Means Square Error (RMSE) smaller than 1.4 m and an excellent absolute 90% linear height error below 2 m. The RMSE values are sensitive to land cover types. For low vegetation the RMSE is ±1.1 m, whereas it is slightly higher for developed areas (±1.4 m) and for forests (±1.8 m). This validation confirms an outstanding absolute height error at 90% confidence level of the global TanDEM-X DEM outperforming the requirement by a factor of five. Due to its extensive and globally distributed reference data sets, this study is of considerable interests for scientific and commercial applications.

  13. Anatomie d’une marge passive hybride. Marge Ifni/Tan-Tan (sud du Maroc au Mesozoique: apports des donnees geophysiques

    Directory of Open Access Journals (Sweden)

    Nahim, M.

    2004-12-01

    Full Text Available The formation of the Ifninan-Tan margin started during the Triassic-Liassic extensional event, and continued during the Jurassic to present opening of the central Atlantic. This margin is located to the S of the South-Atlas lineament, between two contrasted geotectonic scenarios: the N, where the effect of the atlasic and alpine tectonics is spectacular, and the S, where this does not occur. The Ifninan-Tan margin is characterized by a series of post-rift deposits only slightly deformed and disturbed by salt diapirism towards the ocean. These series completely mask the structures of the rift, and they have been studied with the abundant information gathered by the oil exploration campaigns (seismic reflection and drilling, and with the analysis of gravimetrical and magnetic field-potential data. The study of the rift structures (both inland and offshore, highlights the difference between two sectors of the platform: (i a NE sector, where the upper part of the pre-rift substratum is not very deep, and where the dominating structural style is constituted by half-grabens and horsts; and, (ii a SW sector where grabens dominate. This paper shows that two structural styles and modes of extension can coexist on the same passive margin, one hundred kilometers apart. The differences described here are imposed by the structures inherited from the Hercynian evolution.La constitution de la marge Ifni/Tan-Tan a commencé lors de la distension triasico-liasique et s’est poursuivie pendant l’ouverture de l’Atlantique central, qui a eu lieu au Jurassique, jusqu’a l’actuel. Située au Sud du linéament sud atlasique entre deux domaines géotectoniques variés: un domaine au Nord ou l’effet de la tectonique atlasique et alpine est très spectaculaire et un domaine au Sud ou cet effet est très discret, la marge Ifni/Tan-Tan est caractérisée par des séries post-rift peu déformées et perturbées, en mer, par des montées diapiriques de sel. Ces s

  14. Hot spots of mutualistic networks.

    Science.gov (United States)

    Gilarranz, Luis J; Sabatino, Malena; Aizen, Marcelo A; Bascompte, Jordi

    2015-03-01

    Incorporating interactions into a biogeographical framework may serve to understand how interactions and the services they provide are distributed in space. We begin by simulating the spatiotemporal dynamics of realistic mutualistic networks inhabiting spatial networks of habitat patches. We proceed by comparing the predicted patterns with the empirical results of a set of pollination networks in isolated hills of the Argentinian Pampas. We first find that one needs to sample up to five times as much area to record interactions as would be needed to sample the same proportion of species. Secondly, we find that peripheral patches have fewer interactions and harbour less nested networks - therefore potentially less resilient communities - compared to central patches. Our results highlight the important role played by the structure of dispersal routes on the spatial distribution of community patterns. This may help to understand the formation of biodiversity hot spots. © 2014 The Authors. Journal of Animal Ecology © 2014 British Ecological Society.

  15. Cosmicflows-3: Cold Spot Repeller?

    Energy Technology Data Exchange (ETDEWEB)

    Courtois, Hélène M.; Graziani, Romain; Dupuy, Alexandra [University of Lyon, UCB Lyon 1, CNRS/IN2P3, IPN, Lyon (France); Tully, R. Brent [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States); Hoffman, Yehuda [Racah Institute of Physics, Hebrew University, Jerusalem, 91904 (Israel); Pomarède, Daniel [Institut de Recherche sur les Lois Fondamentales de l’Univers, CEA, Université Paris-Saclay, F-91191 Gif-sur-Yvette (France)

    2017-09-20

    The three-dimensional gravitational velocity field within z ∼ 0.1 has been modeled with the Wiener filter methodology applied to the Cosmicflows-3 compilation of galaxy distances. The dominant features are a basin of attraction and two basins of repulsion. The major basin of attraction is an extension of the Shapley concentration of galaxies. One basin of repulsion, the Dipole Repeller, is located near the anti-apex of the cosmic microwave background dipole. The other basin of repulsion is in the proximate direction toward the “Cold Spot” irregularity in the cosmic microwave background. It has been speculated that a vast void might contribute to the amplitude of the Cold Spot from the integrated Sachs–Wolfe effect.

  16. Hipotiroidismo subclínico, ni tan asintomático, ni tan inofensivo Subclinical hypothyroidism neither so asymptomatic nor so harmless

    OpenAIRE

    Marelys Yanes Quesada; Lisbet Rodríguez Fernández; Jeddú Cruz Hernández; Silvia Turcios Tristá; Miguel Ángel Yanes Quesada

    2009-01-01

    El hipotiroidismo subclínico es la condición definida por la elevación de la hormona estimulante del tiroides, en presencia de secreción de hormonas tiroideas (T3 y T4) normales para el rango de referencia. Sus manifestaciones clínicas no son tan nulas como lo define el término subclínico. Si se hace un correcto interrogatorio y examen clínico se pueden encontrar alteraciones en diversos sistemas y órganos que perjudican la calidad de vida de los pacientes afectos e incrementan su morbimortal...

  17. 40 CFR 425.30 - Applicability; description of the hair save or pulp, non-chrome tan, retan-wet finish subcategory.

    Science.gov (United States)

    2010-07-01

    ... save or pulp, non-chrome tan, retan-wet finish subcategory. 425.30 Section 425.30 Protection of... FINISHING POINT SOURCE CATEGORY Hair Save or Pulp, Non-Chrome Tan, Retan-Wet Finish Subcategory § 425.30 Applicability; description of the hair save or pulp, non-chrome tan, retan-wet finish subcategory. The...

  18. Hot Spot Removal System: System description

    International Nuclear Information System (INIS)

    1997-09-01

    Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System''s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section

  19. Magnitude of Higgs-boson-exchange CP violation in two-doublet models with large tanβ

    International Nuclear Information System (INIS)

    Barr, S.M.

    1993-01-01

    CP violation in neutral Higgs-boson exchange is studied in two-doublet models in an expansion in (1/tan 2 β). The typical magnitude of various CP-violating quantities is found for large tanβ. In particular the electric dipole moment (EDM) of the electron and the coefficient c S of the CP-violating electron-nucleon scalar-pseudoscalar operator are examined and it is found that in a simple class of two-doublet models c S /d e is typically O(tan 2 β). Therefore c S is more important than d e for the EDM's of diamagnetic atoms and molecules (Hg, Xe, TlF) typically if tanβ approx-gt 5, and for paramagnetic atoms (Cs, Tl) if tanβ approx-gt 15. The dependence on tanβ of the various contributions to the neutron EDM including the Weinberg three-gluon operator, and the dependence on tanβ of the top-quark EDM are also discussed. Supersymmetric and three-doublet models are also considered

  20. 7 CFR 28.415 - Low Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Low Middling Light Spotted Color. 28.415 Section 28... Spotted Color. Low Middling Light Spotted Color is color which in spot or color, or both, is between Low Middling Color and Low Middling Spotted Color. ...

  1. 7 CFR 28.411 - Good Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Good Middling Light Spotted Color. 28.411 Section 28... Light Spotted Color. Good Middling Light Spotted Color is color which in spot or color, or both, is between Good Middling Color and Good Middling Spotted Color. ...

  2. 7 CFR 28.413 - Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Middling Light Spotted Color. 28.413 Section 28.413... Spotted Color. Middling Light Spotted Color is color which in spot or color, or both, is between Middling Color and Middling Spotted Color. ...

  3. 7 CFR 28.412 - Strict Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Strict Middling Light Spotted Color. 28.412 Section 28... Light Spotted Color. Strict Middling Light Spotted Color is color which in spot or color, or both, is between Strict Middling Color and Strict Middling Spotted Color. ...

  4. Tanning Shade Gradations of Models in Mainstream Fitness and Muscle Enthusiast Magazines: Implications for Skin Cancer Prevention in Men.

    Science.gov (United States)

    Basch, Corey H; Hillyer, Grace Clarke; Ethan, Danna; Berdnik, Alyssa; Basch, Charles E

    2015-07-01

    Tanned skin has been associated with perceptions of fitness and social desirability. Portrayal of models in magazines may reflect and perpetuate these perceptions. Limited research has investigated tanning shade gradations of models in men's versus women's fitness and muscle enthusiast magazines. Such findings are relevant in light of increased incidence and prevalence of melanoma in the United States. This study evaluated and compared tanning shade gradations of adult Caucasian male and female model images in mainstream fitness and muscle enthusiast magazines. Sixty-nine U.S. magazine issues (spring and summer, 2013) were utilized. Two independent reviewers rated tanning shade gradations of adult Caucasian male and female model images on magazines' covers, advertisements, and feature articles. Shade gradations were assessed using stock photographs of Caucasian models with varying levels of tanned skin on an 8-shade scale. A total of 4,683 images were evaluated. Darkest tanning shades were found among males in muscle enthusiast magazines and lightest among females in women's mainstream fitness magazines. By gender, male model images were 54% more likely to portray a darker tanning shade. In this study, images in men's (vs. women's) fitness and muscle enthusiast magazines portrayed Caucasian models with darker skin shades. Despite these magazines' fitness-related messages, pro-tanning images may promote attitudes and behaviors associated with higher skin cancer risk. To date, this is the first study to explore tanning shades in men's magazines of these genres. Further research is necessary to identify effects of exposure to these images among male readers. © The Author(s) 2014.

  5. The optimized log interpretation method and sweet-spot prediction of gas-bearing shale reservoirs

    Science.gov (United States)

    Tan, Maojin; Bai, Ze; Xu, Jingjing

    2017-04-01

    method for TOC prediction has more suitable and flexibility. The mineral contents and porosity from the optimized log interpretation are in good agreement with core XRD experiment and other core experiments. In some polite wells of Jiaoshiba area, china, some parameters in Wufeng-Longmaxi formation are calculated, and geological and engineering sweet spots are finally determined. For the best sweet spot, TOC is about 6%, the porosity is about 8%,the volume of kerogen is about 3%, total gas content is 8m3/t, and the brittleness index is about 90%, and the minimum and maximum horizon stress are about 30MPa and 45 MPa. Therefore, the optimized log interpretation provide an important support for sweet spots prediction and quantitative evaluation of shale gas. References: [1] Sondergeld CH, Ambrose RJ, Rai CS, Moncrieff J. Micro-structure studies of gas shales: in SPE 2012; 131771: 150-166. [2] Ellis D V, Singer J M. 2012. Well Logging for Earth Scientists (2rd edition): Springer Press. [3]Fertl W H, Chillngar G V. 1988. Total organic carbon content determined from well logs: SPE formation evaluation, 407-419. [4] Tan M J, Liu Q, and Zhang S. 2002. A dynamic adaptive radial basis function approach for total organic carbon content prediction in organic shale. Geophysics, 2013, 78(6): 445-459. Acknowledgments: This paper is sponsored by National Natural Science Foundation of China (U1403191, 41172130), the Fundamental Research Funds for the Central Universities (292015209), and National Major Projects "Development of Major Oil& Gas Fields and Coal Bed Methane" (2016ZX05014-001).

  6. Design of a biofilter to reduce the contamination content by chromium generated in the industries of the leather tanning

    International Nuclear Information System (INIS)

    Higuera C, Oscar F; Arroyave L, Juan F; Florez G, Luis

    2009-01-01

    The industrial sector of the tanneries generates unloadings with high volumes of chromium concentrates. The chromium is used in this industry like tanning agent. The tanning of skins presents some difficulties with the use of chromium salts, must to the great amount of tanning agent that does not fix to the skin and finally unloading to the environment, in waste waters causing negative effects in the environment and to the human health. The object of this work is to provide an alternative for the Chromium removal of waste water from tannery using coffee leaf variety castle, coffee Arabica

  7. An investigation of appearance motives for tanning: The development and evaluation of the Physical Appearance Reasons For Tanning Scale (PARTS) and its relation to sunbathing and indoor tanning intentions.

    Science.gov (United States)

    Cafri, Guy; Thompson, J Kevin; Roehrig, Megan; van den Berg, Patricia; Jacobsen, Paul B; Stark, Stephen

    2006-09-01

    Motives for UV exposure have been shown to be related to appearance concerns, yet little research has examined specific tan appearance attitudes. Given this lacuna, Study 1 involved the identification of six factors among college female tanners: general attractiveness, media influence, family/friends influence, physical fitness appearance, acne reasons, and skin aging concerns. In Study 2, a separate sample of college female tanners were used to validate a higher order factor model, which demonstrated acceptable fit. Additionally, the factors converged in the expected directions, with the general attractiveness and skin aging concerns being the best correlate of UV exposure and sun-protection intentions. The relevance of these findings to skin cancer prevention is discussed.

  8. Creating the first indoor tan-free skin smart college campus

    Directory of Open Access Journals (Sweden)

    Jessica S. Mounessa

    2017-06-01

    One campus, East Tennessee State University (ETSU, successfully fulfilled all criteria and implemented the policy change to become the first US Indoor Tan-Free Skin Smart Campus. The greatest challenge faced in recruiting campuses was gaining administrative support. Reported reasons for not adopting the policy change included wanting to wait for other schools to join first and not seeing it as a top priority. Despite the importance of improving skin cancer awareness and decreasing tanning among university students, we faced several challenges in promoting campus-wide policy change. We identify a need for research on effective ways to disseminate university health policies and increased involvement of healthcare providers in policy-related work.

  9. Engineering Evaluation/Cost Analysis (EE/CA) for Decommissioning of TAN-607 Hot Shop Area

    Energy Technology Data Exchange (ETDEWEB)

    J. P. Floerke

    2007-02-05

    Test Area North (TAN) -607, the Technical Support Facility, is located at the north end of the Idaho National Laboratory (INL) Site. U.S. Department of Energy Idaho Operations Office (DOE-ID) is proposing to decommission the northern section of the TAN-607 facility, hereinafter referred to as TAN-607 Hot Shop Area, under a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) non-time-critical removal action (NTCRA). Despite significant efforts by the United States (U.S.) Department of Energy (DOE) to secure new business, no future mission has been identified for the TAN-607 Hot Shop Area. Its disposition has been agreed to by the Idaho State Historical Preservation Office documented in the Memorandum of Agreement signed October 2005 and it is therefore considered a surplus facility. A key element in DOE's strategy for surplus facilities is decommissioning to the maximum extent possible to ensure risk and building footprint reduction and thereby eliminating operations and maintenance cost. In addition, the DOE's 2006 Strategic Plan is ''complete cleanup of the contaminated nuclear weapons manufacturing and testing sites across the United States. DOE is responsible for the risk reduction and cleanup of the environmental legacy of the Nation's nuclear weapons program, one of the largest, most diverse, and technically complex environmental programs in the world. The Department will successfully achieve this strategic goal by ensuring the safety of the DOE employees and U.S. citizens, acquiring the best resources to complete the complex tasks, and managing projects throughout the United States in the most efficient and effective manner.'' TAN-607 is designated as a historical Signature Property by DOE Headquarters Advisory Council on Historic Preservation and, as such, public participation is required to determine the final disposition of the facility. The decommissioning action will place the TAN-607 Hot Shop

  10. Morphological changes at Mt. Etna detected by TanDEM-X

    Science.gov (United States)

    Wegmuller, Urs; Bonforte, Alessandro; De Beni, Emanuela; Guglielmino, Francesco; Strozzi, Tazio

    2014-05-01

    We produced a DEM of the Mt. Etna volcano using TanDEM-X data collected on October 9, 2012. The TanDEM-X data were acquired in bistatic mode with TSX as master sensor and TDX as receive only sensor. The pre-existing SRTM DEM was used for geometrical reference (geocoding, initial height model, large scale reference). The interferogram was computed with 4 looks in range and 4 looks in azimuth. After compensation of the SRTM heights, the differential TanDEM-X interferogram looked overall quite flat but showed local deviations related to noise (e.g. over the sea), topographic effects related to the low resolution of the SRTM DEM, and deviations related to actual changes of the topography, as observed in the Mount Etna peak region. After phase unwrapping, addressed with a minimum-cost flow algorithm and slight spatial filtering, the unwrapped phases were converted to relative heights. In order to move to absolute heights the SRTM height reference was used under the assumption that the deviation from the SRTM DEM is zero at large scale and without any linear trend. Finally, the height model was resampled into geographical coordinates. In the framework of the MED-SUV project, and thanks to the availability of a dense GPS network of more than 100 benchmarks periodically measured by INGV_OE, the TanDEM-X model has been validated. By computing the difference of the elevations provided by TanDEM-X with those measured by GPS we obtained a mean difference of 0.7 m and a standard deviation of 5.2 m. These values are biased by a few GPS benchmarks located in steep areas unfavorable illuminated by the radar. Without considerations of the two more unfavorable GPS stations, the height mean difference and a standard deviation are 0.6 m and 4.3 m respectively. We also performed correlation analyses of the height differences with respect to topography, latitude and longitude and we could exclude any elevation-related errors or geometrical ramp distortions. In the following, we compared

  11. Ancient balancing selection at tan underlies female colour dimorphism in Drosophila erecta.

    Science.gov (United States)

    Yassin, Amir; Bastide, Héloïse; Chung, Henry; Veuille, Michel; David, Jean R; Pool, John E

    2016-01-18

    Dimorphic traits are ubiquitous in nature, but the evolutionary factors leading to dimorphism are largely unclear. We investigate a potential case of sexual mimicry in Drosophila erecta, in which females show contrasting resemblance to males. We map the genetic basis of this sex-limited colour dimorphism to a region containing the gene tan. We find a striking signal of ancient balancing selection at the 'male-specific enhancer' of tan, with exceptionally high sequence divergence between light and dark alleles, suggesting that this dimorphism has been adaptively maintained for millions of years. Using transgenic reporter assays, we confirm that these enhancer alleles encode expression differences that are predicted to generate this pigmentation dimorphism. These results are compatible with the theoretical prediction that divergent phenotypes maintained by selection can evolve simple genetic architectures.

  12. Manipulation of dermis based collagen networks with engineered mechanical behaviour for applications in the tanning sector

    OpenAIRE

    Autiello, Maria Assunta

    2015-01-01

    In this thesis, technologies and processes of the biomaterial field, were implemented in the tanning sector, in order to obtain leather prototypes having engineered mechanical properties such as tear resistance and elastic recovery. The work is basically divided in two parts. First, the characterization of conventional leather material is reported and it is aimed at defining the benchmarks to which the chemical physical parameters of the engineered products need to be compared. The obtained r...

  13. Performance Prediction and Verification for the Synchronization Link of TanDEM-X

    OpenAIRE

    Younis, Marwan; Metzig, Robert; Krieger, Gerhard; Bachmann, Markus; Klein, Rainer

    2007-01-01

    Bistatic Synthetic Aperture Radar (SAR) systems have a high potential for scientific, commercial and security applications. One of the benefits is the possibility to generate digital elevation models using bistatic interferometry. A bistatic satellite mission with interferometric capabilities is TanDEM-X, which consists of two nearly identical SAR satellites. The first, TerraSAR-X, will be launched in February 2007, while the second is currently in Phase-C. The fact that both radar instrument...

  14. Are tanning salons in compliance with German law? An evaluation based on a nationwide representative survey.

    Science.gov (United States)

    Görig, Tatiana; Schneider, Sven; Greinert, Rüdiger; Breitbart, Eckhard W; Diehl, Katharina

    2018-03-01

    Given the evidence for increased skin cancer risk due to the sunbed use, a regulation of hazardous artificial ultraviolet radiation (UVR regulation) was passed in Germany in 2012. The aim of this study was to explore the advisory services in tanning studios as reported by sunbed users and to evaluate the information provided by the personnel of tanning salons after the UVR regulation was enacted. The first wave of the representative National Cancer Aid Monitoring on Sunbed Use included a subgroup of 357 German citizens between 14 and 45 years who had used sunbeds since the UVR regulation was implemented. The participants provided data on sunbed use and related issues in telephone interviews. Although sunbed operators are mandated to offer their customers certain services at least once since the implementation of the UVR regulation, 15.4% of sunbed users were never advised to use protective eyewear during tanning and 13.1% were not provided with eyewear during their last sunbed use. Overall, 66.0% were never offered to develop a tanning schedule, 56.9% were never advised on the risks of UVR, 43.4% were never offered a determination of their skin type and 40.0% of users were never advised on how to use a sunbed safely. The data showed that 3 years after the UVR regulation was enacted, compliance with this legislation is still not optimal. Binding wording in the legal text and making them applicable to unsupervised sunbeds as well is necessary to extend the impact of this legislation. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  15. High School Students’ Use of Sunscreen and Tanning Beds

    Centers for Disease Control (CDC) Podcasts

    2014-08-20

    This podcast is an interview with Corey Basch, EdD, MPH, assistant professor in the Department of Public Health at William Paterson University. Dr. Basch discusses her study on high school students’ use of sunscreen and tanning beds between 2001 and 2011.  Created: 8/20/2014 by Preventing Chronic Disease (PCD), National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 8/20/2014.

  16. Functional dissection of a neuronal network required for cuticle tanning and wing expansion in Drosophila.

    Science.gov (United States)

    Luan, Haojiang; Lemon, William C; Peabody, Nathan C; Pohl, Jascha B; Zelensky, Paul K; Wang, Ding; Nitabach, Michael N; Holmes, Todd C; White, Benjamin H

    2006-01-11

    A subset of Drosophila neurons that expresses crustacean cardioactive peptide (CCAP) has been shown previously to make the hormone bursicon, which is required for cuticle tanning and wing expansion after eclosion. Here we present evidence that CCAP-expressing neurons (NCCAP) consist of two functionally distinct groups, one of which releases bursicon into the hemolymph and the other of which regulates its release. The first group, which we call NCCAP-c929, includes 14 bursicon-expressing neurons of the abdominal ganglion that lie within the expression pattern of the enhancer-trap line c929-Gal4. We show that suppression of activity within this group blocks bursicon release into the hemolymph together with tanning and wing expansion. The second group, which we call NCCAP-R, consists of NCCAP neurons outside the c929-Gal4 pattern. Because suppression of synaptic transmission and protein kinase A (PKA) activity throughout NCCAP, but not in NCCAP-c929, also blocks tanning and wing expansion, we conclude that neurotransmission and PKA are required in NCCAP-R to regulate bursicon secretion from NCCAP-c929. Enhancement of electrical activity in NCCAP-R by expression of the bacterial sodium channel NaChBac also blocks tanning and wing expansion and leads to depletion of bursicon from central processes. NaChBac expression in NCCAP-c929 is without effect, suggesting that the abdominal bursicon-secreting neurons are likely to be silent until stimulated to release the hormone. Our results suggest that NCCAP form an interacting neuronal network responsible for the regulation and release of bursicon and suggest a model in which PKA-mediated stimulation of inputs to normally quiescent bursicon-expressing neurons activates release of the hormone.

  17. HUBBLE FINDS NEW DARK SPOT ON NEPTUNE

    Science.gov (United States)

    2002-01-01

    NASA's Hubble Space Telescope has discovered a new great dark spot, located in the northern hemisphere of the planet Neptune. Because the planet's northern hemisphere is now tilted away from Earth, the new feature appears near the limb of the planet. The spot is a near mirror-image to a similar southern hemisphere dark spot that was discovered in 1989 by the Voyager 2 probe. In 1994, Hubble showed that the southern dark spot had disappeared. Like its predecessor, the new spot has high altitude clouds along its edge, caused by gasses that have been pushed to higher altitudes where they cool to form methane ice crystal clouds. The dark spot may be a zone of clear gas that is a window to a cloud deck lower in the atmosphere. Planetary scientists don t know how long lived this new feature might be. Hubble's high resolution will allow astronomers to follow the spot's evolution and other unexpected changes in Neptune's dynamic atmosphere. The image was taken on November 2, 1994 with Hubble's Wide Field Planetary Camera 2, when Neptune was 2.8 billion miles (4.5 billion kilometers) from Earth. Hubble can resolve features as small as 625 miles (1,000 kilometers) across in Neptune's cloud tops. Credit: H. Hammel (Massachusetts Institute of Technology) and NASA

  18. Melanotropic peptides: more than just 'Barbie drugs' and 'sun-tan jabs'?

    Science.gov (United States)

    Langan, E A; Nie, Z; Rhodes, L E

    2010-09-01

    While ultraviolet radiation (UVR) is a major cause of skin ageing and carcinogenesis, public pursuit of a novel tanning strategy circumventing the need for UVR is increasingly reported in the media and scientific press. This involves the subcutaneous self-administration of unregulated products labelled as melanotan I and/or II, synthetic analogues of α-melanocyte stimulating hormone (α-MSH), as obtained via the internet, tanning salons and gyms. The Medicines and Healthcare products Regulatory Authority has recently raised awareness of the public health risk of transmission of blood-borne viruses from the needle sharing that may occur, and of the potential impurity of these products. Dermatologists should also be aware that these agents can complicate the clinical presentation of patients with pigmented lesions; their use may be suspected in unexpectedly tanned individuals with rapidly pigmenting naevi. Meanwhile, the regulated α-MSH analogue afamelanotide (Clinuvel Pharmaceuticals Ltd, Melbourne, Australia) is showing promise for its photoprotective potential, and is undergoing phase II and III clinical trials in people with photosensitivity disorders and those prone to nonmelanoma skin cancer. The photoprotective and other biological effects of α-MSH analogues await full determination. © 2010 The Authors. Journal Compilation © 2010 British Association of Dermatologists.

  19. Generation and performance assessment of the global TanDEM-X digital elevation model

    Science.gov (United States)

    Rizzoli, Paola; Martone, Michele; Gonzalez, Carolina; Wecklich, Christopher; Borla Tridon, Daniela; Bräutigam, Benjamin; Bachmann, Markus; Schulze, Daniel; Fritz, Thomas; Huber, Martin; Wessel, Birgit; Krieger, Gerhard; Zink, Manfred; Moreira, Alberto

    2017-10-01

    The primary objective of the TanDEM-X mission is the generation of a global, consistent, and high-resolution digital elevation model (DEM) with unprecedented global accuracy. The goal is achieved by exploiting the interferometric capabilities of the two twin SAR satellites TerraSAR-X and TanDEM-X, which fly in a close orbit formation, acting as an X-band single-pass interferometer. Between December 2010 and early 2015 all land surfaces have been acquired at least twice, difficult terrain up to seven or eight times. The acquisition strategy, data processing, and DEM calibration and mosaicking have been systematically monitored and optimized throughout the entire mission duration, in order to fulfill the specification. The processing of all data has finally been completed in September 2016 and this paper reports on the final performance of the TanDEM-X global DEM and presents the acquisition and processing strategy which allowed to obtain the final DEM quality. The results confirm the outstanding global accuracy of the delivered product, which can be now utilized for both scientific and commercial applications.

  20. Selection of the Chrome Reduction Bacteria in the Waste of Tanning Leather Industries by Ozonization Method

    International Nuclear Information System (INIS)

    Yazid, M.; Aris Bastianudin; Widdi Usada

    2007-01-01

    Selection of the chrome reduction bacteria in the waste of tanning leather industries by ozonization method has been done. The objectives of this research was to obtain isolate bacteria from the waste with chrome contain, so that expected can be used for chrome bioremediation agent for arrange to improved the waste treatment for tanning leather industries. Selection of bacteria in the waste was carried out by ozonization method with time variation 0 to 210 minutes by time interval 15 minutes. Isolation bacteria was carried out was grown on the BHI media for 24 hours at 37°C temperature. So be inoculated by streak plate method on the TBX, MC, EA, CTM and BP media. Characterization of bacteria was done by saw the colonies morphology, sel morphology and biochemical characterization. So, identification of isolate bacteria by matching profile method. The result of this research can be obtained 5 isolate bacteria BCR1, BCR2, BCR3, BCR4 and BCR5 with the different phenotypic character. From the five isolate can be selected resistance ozon isolate until 180 minutes time ozonization were BCR 2, were identified belong to the genus of Bacillus. The examination results showed that the isolate bacteria be able to reduction of the chrome concentration in the waste of tanning leather industries by 71.03 %. Efficiency. (author)

  1. The supersymmetric Higgs sector and $B-\\overline{B}$ mixing for large tan $\\beta$

    CERN Document Server

    Gorbahn, Martin; Nierste, Ulrich; Trine, Stephanie

    2009-01-01

    We match the Higgs sector of the most general flavour breaking and CP violating minimal supersymmetric standard model (MSSM) onto a generic two-Higgs-doublet model, paying special attention to the definition of tan beta in the effective theory. In particular no tan beta-enhanced loop corrections appear in the relation to tan beta defined in the DRbar scheme in the MSSM. The corrections to the Higgs-mediated flavour-changing amplitudes which result from this matching are especially relevant for the B_d and B_s mass differences dM_s,d for minimal flavour violation, where the superficially leading contribution vanishes. We give a symmetry argument to explain this cancellation and perform a systematic study of all Higgs-mediated effects, including Higgs loops. The corrections to dM_s are at most 7% for mu>0 and M_A tau^+ nu or B -> X_s gamma. We further update supersymmetric loop corrections to the Yukawa couplings, where we include all possible CP-violating phases and correct errors in the literature. The possi...

  2. Tropical forest heterogeneity from TanDEM-X InSAR and lidar observations in Indonesia

    Science.gov (United States)

    De Grandi, Elsa Carla; Mitchard, Edward

    2016-10-01

    Fires exacerbated during El Niño Southern Oscillation are a serious threat in Indonesia leading to the destruction and degradation of tropical forests and emissions of CO2 in the atmosphere. Forest structural changes which occurred due to the 1997-1998 El Niño Southern Oscillation in the Sungai Wain Protection Forest (East Kalimantan, Indonesia), a previously intact forest reserve have led to the development of a range of landcover from secondary forest to areas dominated by grassland. These structural differences can be appreciated over large areas by remote sensing instruments such as TanDEM-X and LiDAR that provide information that are sensitive to vegetation vertical and horizontal structure. One-point statistics of TanDEM-X coherence (mean and CV) and LiDAR CHM (mean, CV) and derived metrics such as vegetation volume and canopy cover were tested for the discrimination between 4 landcover classes. Jeffries-Matusita (JM) separability was high between forest classes (primary or secondary forest) and non-forest (grassland) while, primary and secondary forest were not separable. The study tests the potential and the importance of potential of TanDEM-X coherence and LiDAR observations to characterize structural heterogeneity based on one-point statistics in tropical forest but requires improved characterization using two-point statistical measures.

  3. Pink Spot - Literature Review and Case Report.

    Science.gov (United States)

    Petel, Roy; Fuks, Anna

    Pink spots in teeth were first described by Mummery in 1920, and were related to resorption. Resorption is a pathologic process that often eludes the clinician with its varied etiologic factors and diverse clinical presentations. Resorption can be generally classified as internal and external resorption. Internal resorption has been described as a rare occurrence as compared to external resorption. This article describes a pink spot that was diagnosed as a progressing resorption process. Early diagnosis enabled a successful management of the lesion. Early diagnosis and treatment of an internal resorption, clinically seen as a pink spot, in a primary central incisor may prevent its fast progress and subsequent loss.

  4. DETERMINING LIGHTFASTNESS PROPERTIES OF VEGETABLE TANNINS AND CHEMICAL PROPERTIES OF THE LEATHERS TANNED WITH MODIFIED MIMOSA AND QUEBRACHO

    OpenAIRE

    OMUR Sukru; MUTLU Mehmet Mete

    2016-01-01

    The vegetable tannins are the oldest tanning agents used in leather industry. They give their natural character and colour to the leathers which they are applied to, but they have the disadvantage of colour change when they are exposed to light for prolonged times. In this study light fastness properties of leathers tanned with mimosa, quebracho, valonea and chestnut tannins were measured. Lightfastness properties of mimosa and quebracho tannins were found lower. Then these tannins were modif...

  5. Stoichiometry and tribological behavior of thick Ta(N) coatings produced by direct current magnetron sputtering (DCMS)

    Science.gov (United States)

    Guo, Xiaotong; Niu, Yunsong; Chen, Minghui; Sun, Wenyao; Zhu, Shenglong; Wang, Fuhui

    2018-01-01

    Thick Ta(N) coating of 51 μm has been successfully obtained by DCMS technology. Ta(N) is a kind of distorted Ta matrix, which is inter-soluble with N-defect lattice structure, forming the disabled bcc structure. From the XRD and XPS investigations, the composition of Ta(N) coating is consisted of bcc-Ta and bcc-TaN0.06, while that of Ta coating mainly contains β-Ta phase. It can be concluded from wear test, nanoindentation test and SEM observations, wear resistance of Ta(N) coating is much better than that of Ta coating, due to its high hardness, H/E, H3/E2 value and low COF value. The wear mechanism of Ta coating is the compound fatigue and abrasive wear, while that of Ta(N) coating is transformed into adhesive wear mechanism. The secondary adhesion of the plastic deformation for the Ta(N) coating can reinforce the coated surface, to improve the load-bearing and anti-wear capacities, and thus improve the wear resistance.

  6. Asparagus Beetle and Spotted Asparagus Beetle

    OpenAIRE

    Hodgson, Erin W.; Drost, Dan

    2007-01-01

    Asparagus beetle, Crioceris asparagi, and spotted asparagus beetle, C. duodecimpunctata are leaf beetles in the family Chrysomelidae. These beetles feed exclusively on asparagus and are native to Europe. Asparagus beetle is the more economically injurious of the two species.

  7. Detecting Blind Spot By Using Ultrasonic Sensor

    Directory of Open Access Journals (Sweden)

    T. S. Ajay

    2015-08-01

    Full Text Available Safety remains a top concern for automobile industries and new-car shoppers. Detection of Blind Spots is a major concern for safety issues. So automobiles have been constantly updating their products with new technologies to detect blind spots so that they can add more safety to the vehicle and also reduce the road accidents. Almost 1.5 million people die in road accidents each year. Blind spot of an automobile is the region of the vehicle which cannot be observed properly while looking either through side or rear mirror view. To meet the above requirements this paper describes detecting blind spot by using ultrasonic sensor and controlling the direction of car by automatic steering. The technology embedded in the system is capable of automatically steer the vehicle away from an obstacle if the system determines that a collision is impending or if the vehicle is in the vicinity of our car.

  8. How Many Spots Does a Cheetah Have?

    Science.gov (United States)

    Reed, Kristine M.

    2000-01-01

    Describes first grade students' mathematical investigation of the number of spots on a cheetah. The exploration of counting and estimation strategies that grew from the investigation gives evidence that mathematicians come in all ages. (ASK)

  9. Plasma spot welding of ferritic stainless steels

    International Nuclear Information System (INIS)

    Lesnjak, A.; Tusek, J.

    2002-01-01

    Plasma spot wedding of ferritic stainless steels studied. The study was focused on welding parameters, plasma and shieldings and the optimum welding equipment. Plasma-spot welded overlap joints on a 0.8 mm thick ferritic stainless steel sheet were subjected to a visual examination and mechanical testing in terms of tension-shear strength. Several macro specimens were prepared Plasma spot welding is suitable to use the same gas as shielding gas and as plasma gas , i. e. a 98% Ar/2% H 2 gas mixture. Tension-shear strength of plasma-spot welded joint was compared to that of resistance sport welded joints. It was found that the resistance welded joints withstand a somewhat stronger load than the plasma welded joints due to a large weld sport diameter of the former. Strength of both types of welded joints is approximately the same. (Author) 32 refs

  10. A telemetry experiment on spotted grunter Pomadasys ...

    African Journals Online (AJOL)

    associated fish in South Africa was investigated by conducting a tracking experiment on spotted grunter Pomadasys commersonnii in the East Kleinemonde Estuary. The telemetry equipment comprised two VEMCO V8 transmitters and a ...

  11. Measuring microfocus focal spots using digital radiography

    Energy Technology Data Exchange (ETDEWEB)

    Fry, David A [Los Alamos National Laboratory

    2009-01-01

    Measurement of microfocus spot size can be important for several reasons: (1) Quality assurance during manufacture of microfocus tubes; (2) Tracking performance and stability of microfocus tubes; (3) Determining magnification (especially important for digital radiography where the native spatial resolution of the digital system is not adequate for the application); (4) Knowledge of unsharpness from the focal spot alone. The European Standard EN 12543-5 is based on a simple geometrical method of calculating focal spot size from unsharpness of high magnification film radiographs. When determining microfocus focal spot dimensions using unsharpness measurements both signal-to-noise (SNR) and magnification can be important. There is a maximum accuracy that is a function of SNR and therefore an optimal magnification. Greater than optimal magnification can be used but it will not increase accuracy.

  12. IN RESEARCHES OF SIBERIA IMPORTANT NAME: VLADIMIR GERMANOVICH BOGORAZ- TAN / SIBIRYA ARASTIRMALARINDA ÖNCÜ BIR ISIM: VLADIMIR GERMANOVIÇ BOGORAZ-TAN

    Directory of Open Access Journals (Sweden)

    Dr. Muvaffak DURANLI

    2008-12-01

    Full Text Available Vladimir Germanovich Bogoraz, best knownunder literary pseudonym N.A. Tan (1865- 1936 was arevolutionary, writer and anthropologist, especiallyknown for his studies of the Chukchi people in Siberia. In1886, he moved to Saint Petersburg where he wasarrested and later exiled into North-Eastern Siberia, nearYakutsk (1889-1899, where he studied the Chukchipeople, their way of life, traditions, language, and beliefs.In his works and researches have important materialsabout Turcic people, who lived and live on this area.Except for that scientific studies, Bogoraz haspublished the book “Chukchi stories” (1899, “EightTribes” (1902, “The Victim of a Dragon” (1909, storiesand the novel “the Revived Tribe” (1935

  13. Knowledge about Ultraviolet Radiation Hazards and Tanning Behavior of Cosmetology and Medical Students.

    Science.gov (United States)

    Zuba, Ewelina Bogumiła; Francuzik, Wojciech; Malicki, Przemysław; Osmola-Mańkowska, Agnieszka; Jenerowicz, Dorota

    2016-04-01

    Dear Editor, Ultraviolet (UV) radiation is a well-known physical hazard responsible for photoaging, photoallergic, and phototoxic reactions as well as carcinogenesis, including life-threatening melanomas (1,2). Overexposure to both natural and artificial UV radiation is a public health concern. 30% of cancers diagnosed worldwide are skin cancers. Approximately three million non-melanoma skin cancers and 132 000 new cases of melanomas are diagnosed globally each year (3). Sunburns, especially in childhood, are a very important risk factor for melanomas. Several studies demonstrated a positive association between sunbed use and an increased incidence of malignant melanoma (4). Current medical and cosmetology students will soon be knowledge providers about the risks of excessive exposure to UV radiation and prophylaxis of its consequences. Our aim was to evaluate their knowledge about the side effects of ultraviolet radiation and tanning behaviors. Details on the knowledge and habits of students were obtained during classes at the Poznan University of Medical Sciences. With approval from the Institutional Bioethical Committee, a 41-question anonymous survey was conducted in the spring of 2012 among 190 medical (1-6 year) and cosmetology students (1-5 year). The mean age of the study group was 22.3 years (standard deviation (SD) = 2.4 years), range 19-28 years. The survey was composed of closed and open-ended questions prepared by the authors. The first part of the form included demographic data: gender, age, degree course, and school year. The students were also asked about their reaction to sunlight, sunburns in childhood, and personal and family history of skin cancers or dysplastic nevus syndrome. The factual section of the survey contained questions evaluating responder knowledge about sunbeds and risk of UV radiation as well as their personal tanning habits. The open-ended questions asked responders to provide definitions of: skin phototype, sun protection factor

  14. X-ray spot film device

    International Nuclear Information System (INIS)

    Pury, T.; Tsen, M.L.S.; Gray, F.L.; Stehr, R.E.; Konle, R.L.

    1981-01-01

    Improvements are described in an X-ray spot film device which is used in conjunction with an X-ray table to make a selected number of radiographic exposures on a single film and to perform fluoroscopic examinations. To date, the spot film devices consist of two X-ray field defining masks, one of which is moved manually. The present device is more convenient to use and speeds up the procedure. (U.K.)

  15. Thermal Wave Imaging: Flying SPOT Camera.

    Science.gov (United States)

    Wang, Yiqian

    1993-01-01

    A novel "Flying Spot" infrared camera for nondestructive evaluation (NDE) and nondestructive characterization is presented. The camera scans the focal point of an unmodulated heating laser beam across the sample in a raster. The detector of the camera tracks the heating spot in the same raster, but with a time delay. The detector is thus looking at the "thermal wake" of the heating spot. The time delay between heating and detection is determined by the speed of the laser spot and the distance between it and the detector image. Since this time delay can be made arbitrarily small, the camera is capable of making thermal wave images of phenomena which occur on a very short time scale. In addition, because the heat source is a very small spot, the heat flow is fully three-dimensional. This makes the camera system sensitive to features, like tightly closed vertical cracks, which are invisible to imaging systems which employ full-field heating. A detailed theory which relates the temperature profile around the heating spot to the sample thermal properties is also described. The camera represents a potentially useful tool for measuring thermal diffusivities of materials by means of fitting the recorded temperature profiles to the theoretical curves with the diffusivity as a fitting parameter.

  16. Indoor Tanning

    Science.gov (United States)

    ... get that benefit. According to the Surgeon General, fair and light-skinned people can get a healthy ... appearance of aging has not proven to be true. Advertising and Labeling The Federal Trade Commission (FTC) ...

  17. Indoor Tanning

    Science.gov (United States)

    ... Registration General information Housing & travel Education Exhibit hall Mobile app 2019 Annual Meeting Derm Exam Prep Course ... SkinPAC State societies Scope of practice Truth in advertising NP/PA laws Action center Public and patients ...

  18. Indoor tanning in businesses and homes and risk of melanoma and nonmelanoma skin cancer in 2 US case-control studies.

    Science.gov (United States)

    Ferrucci, Leah M; Vogel, Rachel Isaksson; Cartmel, Brenda; Lazovich, DeAnn; Mayne, Susan T

    2014-11-01

    Indoor tanning increases skin cancer risk. Beyond early research describing melanoma and sun lamps, few recent reports describe where individuals indoor tan and whether skin cancer risk varies by location (business, home-based). We sought to assess where individuals tanned indoors and skin cancer risk by tanning device location. Multivariate logistic regression was conducted in 2 US case-control studies of melanoma (1161 cases, 1083 controls, ages 25-59 years) and early-onset basal cell carcinoma (375 cases, 382 controls, agebasal cell carcinoma (odds ratio 1.69, 95% confidence interval 1.15-2.48) compared with non-users. Melanoma risk was also increased in the small number who reported tanning indoors only at home relative to non-users (odds ratio 4.14, 95% confidence interval 1.75-9.78); 67.6% used sun lamps. Self-reported tanning and potential recall bias are limitations. Business-only tanning, despite claims of "safe" tanning, was positively associated with a significant risk of melanoma and basal cell carcinoma. Home tanning was uncommon and mostly from sun lamps, which were rarely used by younger participants. Regardless of location, indoor tanning was associated with increased risk of skin cancer. Copyright © 2014 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

  19. Possible recombinogenic effect of caprolactam in the mammalian spot test.

    Science.gov (United States)

    Fahrig, R

    1989-11-01

    Tests of caprolactam in the mouse spot test showed that treatment with this compound increased the frequency of color spots among animals treated in utero. The nature of these spots suggests that caprolactam may induce spots through the induction of mitotic recombination.

  20. 7 CFR 28.423 - Middling Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Middling Spotted Color. 28.423 Section 28.423... REGULATIONS COTTON CLASSING, TESTING, AND STANDARDS Standards Spotted Cotton § 28.423 Middling Spotted Color. Middling Spotted Color is color which is within the range represented by a set of samples in the custody of...

  1. Modelling of XCO2 Surfaces Based on Flight Tests of TanSat Instruments

    Directory of Open Access Journals (Sweden)

    Li Li Zhang

    2016-11-01

    Full Text Available The TanSat carbon satellite is to be launched at the end of 2016. In order to verify the performance of its instruments, a flight test of TanSat instruments was conducted in Jilin Province in September, 2015. The flight test area covered a total area of about 11,000 km2 and the underlying surface cover included several lakes, forest land, grassland, wetland, farmland, a thermal power plant and numerous cities and villages. We modeled the column-average dry-air mole fraction of atmospheric carbon dioxide (XCO2 surface based on flight test data which measured the near- and short-wave infrared (NIR reflected solar radiation in the absorption bands at around 760 and 1610 nm. However, it is difficult to directly analyze the spatial distribution of XCO2 in the flight area using the limited flight test data and the approximate surface of XCO2, which was obtained by regression modeling, which is not very accurate either. We therefore used the high accuracy surface modeling (HASM platform to fill the gaps where there is no information on XCO2 in the flight test area, which takes the approximate surface of XCO2 as its driving field and the XCO2 observations retrieved from the flight test as its optimum control constraints. High accuracy surfaces of XCO2 were constructed with HASM based on the flight’s observations. The results showed that the mean XCO2 in the flight test area is about 400 ppm and that XCO2 over urban areas is much higher than in other places. Compared with OCO-2’s XCO2, the mean difference is 0.7 ppm and the standard deviation is 0.95 ppm. Therefore, the modelling of the XCO2 surface based on the flight test of the TanSat instruments fell within an expected and acceptable range.

  2. Impact of an outright ban on the availability of commercial tanning services in Victoria, Australia.

    Science.gov (United States)

    Sinclair, C; Cleaves, N; Dunstone, K; Makin, J; Zouzounis, S

    2016-08-01

    Australian states have introduced an outright ban on commercial artificial tanning sunbeds. This was based on evidence from systematic reviews affirming a strong association between tanning bed use and increased risk of melanoma. The implementation of the ban provides an opportunity to assess the effectiveness of the legislation in preventing access to artificial UV radiation. Compliance with the ban has been enforced and monitored by government departments. We additionally monitored online tanning bed advertisements before and after the ban, showing a decline over time in the number of sunbeds advertised for sale on gumtree.com.au and ebay.com.au, from a peak of 115 advertisements in May 2014 to 50 or fewer per month from February 2015. There was also an increase in advertised price, with the percentage of sunbeds offered in Victoria on gumtree.com.au at higher than $2 000 increasing from around 25% between January and June 2014 to 65% in the quarter following the introduction of the ban. Advertisements on gumtree.com.au from individuals wishing to access a sunbed in a private home in Victoria increased from only isolated instances in the months immediately prior to the ban, to between 25 and 77 advertisements per month in the quarter following the ban. In summary, the introduction of an outright ban of commercial sunbeds has achieved a dramatic reduction in the availability of harmful artificial UV radiation sources in Australia. Long-term benefits to the health of the population and a reduction in costs to the health system are expected to result. © 2016 British Association of Dermatologists.

  3. Standardization of a multivariate calibration model applied to the determination of chromium in tanning sewage.

    Science.gov (United States)

    Sales, F; Rius, A; Callao, M P; Rius, F X

    2000-06-21

    A multivariate standardization procedure was used to extend the lifetime of a multivariate partial least squares (PLS) calibration model for determining chromium in tanning sewage. The Kennard/Stone algorithm was used to select the transfer samples and the F-test was used to decide whether slope/bias correction (SBC) or piecewise direct standardization (PDS) had to be applied. Special attention was paid to the transfer samples since the process can be invalidated if samples are selected which behave anomalously. The results of the F-test were extremely sensitive to heterogeneity in the transfer set. In these cases, it should be taken as an interpretation tool.

  4. Evaluate the use of tanning agent in leather industry using material flow analysis, life cycle assessment and fuzzy multi-attribute decision making (FMADM)

    Science.gov (United States)

    Alfarisi, Salman; Sutono, Sugoro Bhakti; Sutopo, Wahyudi

    2017-11-01

    Tanning industry is one of the companies that produce many pollutants and cause the negative impact on the environment. In the production process of tanning leather, the use of input material need to be evaluated. The problem of waste, not only have a negative impact on the environment, but also human health. In this study, the impact of mimosa as vegetable tanning agent evaluated. This study will provide alternative solutions for improvements to the use of vegetable tanning agent. The alternative solution is change mimosa with indusol, gambier, and dulcotan. This study evaluate the vegetable tanning of some aspects using material flow analysis and life cycle assessment approach. Life cycle assessment (LCA) is used to evaluate the environmental impact of vegetable tanning agent. Alternative solution selection using fuzzy multi-attribute decision making (FMADM) approach. Results obtained by considering the environment, human toxicity, climate change, and marine aquatic ecotoxicity, is to use dulcotan.

  5. Tests of fixity of the Indo-Atlantic hot spots relative to Pacific hot spots

    Science.gov (United States)

    Koivisto, Emilia A.; Andrews, David L.; Gordon, Richard G.

    2014-01-01

    Rates of inter-hot spot motion have been debated for decades. Herein we present updated predictions for the tracks of the Tristan da Cunha, Réunion, and Iceland hot spots assuming them to be fixed relative to Pacific hot spots. Uncertainties in Pacific hot spot rotations, which include uncertainties in the current locations of hot spots of 100-200 km, are combined with uncertainties in relative plate motions accumulated through the plate circuit to obtain the final uncertainty in the predicted positions (including uncertainties of 150-200 km in the current locations of the Indo-Atlantic hot spots). Improvements to reconstruction methods, to relative plate reconstructions, to age dates along the tracks, and to the geomagnetic reversal timescale lead to significant changes from prior results. When compared with the observed tracks, the predicted tracks indicate nominal rates of motion of only 2-6 mm a-1 of these Indo-Atlantic hot spots relative to Pacific hot spots over the past 48 Ma. Within the uncertainties, the rates range from no motion to rates as high as 8-13 mm a-1. For reconstructions prior to 48 Ma B.P., however, the apparent rates of inter-hot spot motion are much larger, 46-55 ± 20 mm a-1, if the motion occurred entirely between 68 Ma B.P. and 48 Ma B.P. Either hot spots moved rapidly before 48 Ma B.P., and slowed drastically at ≈ 48 Ma B.P., or global plate circuits through Antarctica become less reliable as one goes increasingly further into the past. Most paleomagnetic data favor the latter explanation.

  6. [Posterior lamellar keratoplasty with DSEK technique and use of the Tan EndoGlide - short-term results].

    Science.gov (United States)

    Kałuiny, Bartłomiej J; Piotrowiak, Ilona; Sołdańska, Beata; Grzybek, Katarzyna; Czajkowska, Monika; Galas, Małgorzata; Malukiewicz, Grazyna

    2013-01-01

    To present the differences in surgical technique of DSEK (Descemet's Stripping Endothelial Keratoplasty) with the use of Tan EndoGlide (Coronet, UK) and Busin Glide (Moria, FR). Short-term results will also be presented, DSEK was performed in 24 eyes, in 8 cases the surgery was combined with cataract phacoemulsification and lOL implantation. Surgery course and 6 months postoperative results of first 12 eyes performed with the use of Tan EndoGlide were compared with 12 consecutive eyes preformed with Busin Glide. Tan EndoGlide provided much more stable anterior chamber, donor tissue unfolding process was better controlled but the incision was wider incision. Surgically induced mean refractory cylinder 6. months after the surgery was 1.56 - 1.15 Dsph in Tan EndoGlide group and 1.18 +/- 1.10 Dsph in Busin Glide group (P 0.05). Mean CDVA was 0.65+/- 0.27 and 0.63 +/- 0.25, respectively (P>0,05). Statistically significant differences in intra- and post-operative complications between both groups were not found. The Tan EndoGlide used during posterior lamellar keratoplasty with DSEK technique is a good alternative to currently used methods. It provides better stabilization of the anterior chamber, however its use is linked with higher postoperative astigmatism in comparison with Busin Glide. The visual outcomes and endothelial cell loss 6 months after the surgery were similar in both groups.

  7. Spotting Stellar Activity Cycles in Gaia Astrometry

    Science.gov (United States)

    Morris, Brett M.; Agol, Eric; Davenport, James R. A.; Hawley, Suzanne L.

    2018-03-01

    Astrometry from Gaia will measure the positions of stellar photometric centroids to unprecedented precision. We show that the precision of Gaia astrometry is sufficient to detect starspot-induced centroid jitter for nearby stars in the Tycho-Gaia Astrometric Solution (TGAS) sample with magnetic activity similar to the young G-star KIC 7174505 or the active M4 dwarf GJ 1243, but is insufficient to measure centroid jitter for stars with Sun-like spot distributions. We simulate Gaia observations of stars with 10 year activity cycles to search for evidence of activity cycles, and find that Gaia astrometry alone likely can not detect activity cycles for stars in the TGAS sample, even if they have spot distributions like KIC 7174505. We review the activity of the nearby low-mass stars in the TGAS sample for which we anticipate significant detections of spot-induced jitter.

  8. Tanning salons in Santiago, Chile: the knowledge of the staff in charge and the quality of information provided to potential clients before and after a new regulatory law.

    Science.gov (United States)

    Salomone, Claudia; Majerson, Daniela; Molgó, Montserrat; de Santa María, Mariá Luisa Sáenz; Romero, William

    2009-04-01

    In recent years, the use of artificial tanning devices has become very popular in Chile. In April, 2007, a new law was established to regulate the non-medical use of tanning beds and tanning booths. The aim of this study was to evaluate the level and quality of information provided by tanning salon staff to clients before deciding on using the services. This information was collected before and 6 months after the law was enacted by researchers visiting tanning salons posing as potential clients. Using a previously designed questionnaire, 24 tanning salons in Santiago, Chile, were evaluated by researchers acting as potential customers without experience with artificial tanning devices. Employees were questioned using a hidden questionnaire before and 6 months after enactment of the law. Before the law, 25% of the establishments gave spontaneous information about the risks of using tanning beds, which increased to 45.8% after enactment of the law. Clients never received written information, either before or after enactment of the law. On both evaluations, more than 1/3 of the employees affirmed that there were no risks in using tanning beds. Before enactment of the law, only 12.5% of the tanning salons required the use of goggles, while after the law, this increased to 25% (P=NS). Only two establishments required that clients sign an informed consent form after enactment of the law. The level of knowledge among employees in tanning salons was very low and the quality of the information they provided to the clients was very poor. It was important to legislate on ultraviolet tanning services, but at present, the impact of the law has been very limited.

  9. Interferometric SAR Coherence Models for Characterization of Hemiboreal Forests Using TanDEM-X Data

    Directory of Open Access Journals (Sweden)

    Aire Olesk

    2016-08-01

    Full Text Available In this study, four models describing the interferometric coherence of the forest vegetation layer are proposed and compared with the TanDEM-X data. Our focus is on developing tools for hemiboreal forest height estimation from single-pol interferometric SAR measurements, suitable for wide area forest mapping with limited a priori information. The multi-temporal set of 19 TanDEM-X interferometric pairs and the 90th percentile forest height maps are derived from Airborne LiDAR Scanning (ALS, covering an area of 2211 ha of forests over Estonia. Three semi-empirical models along with the Random Volume over Ground (RVoG model are examined for applicable parameter ranges and model performance under various conditions for over 3000 forest stands. This study shows that all four models performed well in describing the relationship between forest height and interferometric coherence. Use of an advanced model with multiple parameters is not always justified when modeling the volume decorrelation in the boreal and hemiboreal forests. The proposed set of semi-empirical models, show higher robustness compared to a more advanced RVoG model under a range of seasonal and environmental conditions during data acquisition. We also examine the dynamic range of parameters that different models can take and propose optimal conditions for forest stand height inversion for operationally-feasible scenarios.

  10. The effect of mimosa and syntan mixture on the quality of tanned red snapper leather

    Science.gov (United States)

    Pratama, M.; Sahubawa, L.; Pertiwiningrum, A.; Rahmadian, Y.; Puspita, I. D.

    2018-03-01

    This study aimed to determine the effect of syntan and mimosa combination on the quality of tanned red snapper leather. The study was designed using complete randomized design (CRD) and the advanced test of Least Significant Difference (LSD) with three replications and three treatments of combined syntan and mimosa, namely: p1 (4 % syntan, 5 % mimosa), p2 (8 % syntan, 5 %mimosa), p3 (12 % syntan, 5 % mimosa). Data were analyzed using SPSS 18. The measured parameters were tensile strength (N·cm-2), elongation (%), tear strength (N·cm-1), enervation (mm), wrinkle temperature (°C), fat/oil content (%) and water content (%). The results indicate that the combined syntan and mimosa tanners gave no significant effect on the physical parameters (tensile strength, elongation, tear strength, enervation and wrinkle temperature) and chemical parameters (moisture and fat/oil). All treatments (p1, p2 and p3) met the Indonesian National Standard (SNI) 06-4586-1998 for chrome tanned freshwater snake leather for the parameters of tensile strength, tear strength, enervation, wrinkle temperature and moisture. The parameter of elongation and fat/oil content did not meet with the SNI 06-4586-1998. Among the three combinations of a tanner, syntan 4 % and mimosa 5 % treatment gave the best leather quality.

  11. Electric dipole moments in the MSSM at large tanβ

    International Nuclear Information System (INIS)

    Demir, Durmus; Lebedev, Oleg; Olive, Keith A.; Pospelov, Maxim; Ritz, Adam

    2004-01-01

    Within the minimal supersymmetric standard model (MSSM), the large tanβ regime can lead to important modifications in the pattern of CP-violating sources contributing to low energy electric dipole moments (EDMs). In particular, four-fermion CP-violating interactions induced by Higgs exchange should be accounted for alongside the constituent EDMs of quarks and electrons. To this end, we present a comprehensive analysis of three low energy EDM observables - namely the EDMs of thallium, mercury and the neutron - at large tanβ, in terms of one- and two-loop contributions to the constituent EDMs and four-fermion interactions. We concentrate on the constrained MSSM as well as the MSSM with non universal Higgs masses, and include the CP-violating phases of μ and A. Our results indicate that the atomic EDMs receive significant corrections from four-fermion operators, especially when Im(A) is the only CP-violating source, whereas the neutron EDM remains relatively insensitive to these effects. As a consequence, in a large portion of the parameter space, one cannot infer a separate bound on the electron EDM via the experimental constraint on the thallium EDM. Furthermore, we find that the electron EDM can be greatly reduced due to the destructive interference of one- and two-loop contributions with the latter being dominated by virtual status

  12. THE CHROME-TANNED GOAT LEATHER FOR HIGH QUALITY OF BATIK

    Directory of Open Access Journals (Sweden)

    W. Pancapalaga

    2015-09-01

    Full Text Available in which the first stage aimed to evaluate sodium silica as batik wax releasing agent on chrome leather.Completely randomized design (CRD was applied in this study. The concentration of sodium silica wastreated as treatments, in which Tl = 0, T2 = 2 g/L, T3: 4 g/L and T4 = 6 g/L. The second stage of thestudy was aimed to evaluate the type of dye used in batik method dyeing on chrome-tanned goat leather.CRD was used and the treatments were types of dye, i.e. T'1 = acid, T'2= indigosol, T'3 = napthol, T'4 =remazol. In both studies, 9 replicates were applied for each treatment. The use of sodium silicateconcentration of 2 g/L resulted in the percentage of release wax of 91.4% and did not degrade the qualityof chrome leather. The type of acid dyes and naphthol provided the best adhesion and color brightnessand resistance to washing treatment, water, sweat, bend, and rub at 4/5 to 5 on a scale of gray. Inconclusion, chrome tanned goat leather with batik dyeing method was recommended to become one ofthe raw materials of leather goods.

  13. [Endothelial keratoplasty: Descemet stripping (DSEK) using TAN EndoGlide™ device: case series].

    Science.gov (United States)

    Pazos, Henrique Santiago Baltar; Pazos, Paula Fernanda Morais Ramalho Baltar; Nogueira Filho, Pedro Antônio; Grisolia, Ana Beatriz Diniz; Silva, André Berger Emiliano; Gomes, José Álvaro Pereira

    2011-01-01

    To report the results of Descemet stripping endothelial keratoplasty (DSEK) using the TAN EndoGlideTM device to facilitate the insertion of the endothelial membrane. Prospective clinical study that included nine patients presenting corneal edema secondary to endothelial dysfunction. Best corrected visual acuity, refraction, central corneal thickness, endothelial cell density and complications were analyzed after a six-month follow-up. There was a significant improvement in the corneal edema and visual acuity in 7 patients (77.78%). The best corrected visual acuity ranged between 20/40 and 20/200. The average density of endothelial cells in six months varied between 1,305 cells/mm² and 2,346 cells/mm² with an average loss of 33.14% cells. Detachment of part of the graft was observed in one eye (11.11%) and primary failure of the endothelial transplantation occurred in 2 eyes (22.22%). The device TAN EndoGlideTM facilitates the introduction of the graft in Descemet stripping endothelial keratoplasty.

  14. Discourse and policy making on consumer protection in the areas of mobile telecommunication and tanning.

    Science.gov (United States)

    Schweikardt, Christoph; Rosentreter, Michael; Gross, Dominik

    2012-01-01

    Perceived health risks from electromagnetic fields in mobile telecommunication and from UV radiation in tanning have become regulation issues in Germany during the last decade. Health risk messages from government expert bodies and the main stakeholders in these areas as well as subsequent consumer protection policy making are investigated. Publications and websites of government expert bodies and the main stakeholders as well as debates in Federal Parliament were analysed to compare argumentation patterns and parliamentary decision-making processes. In both areas, the public received competing health risk messages from the industries and their critics. As a government expert body, the Federal Office for Radiation Protection (BfS) held the view that alleged health risks from electromagnetic telecommunication were not proven, and propagated the precautionary principle. This opinion did not endanger the agreement of 2001 between the government and mobile telecommunication operators. After the failure to obtain voluntary commitment from the tanning industry, by contrast, the BfS recommended stricter consumer protection legislation, which was subsequently implemented. The BfS was in a key position to demand the prerogative of interpretation concerning mutually excluding health risk messages and to provide the argumentation which led the way to non-ionic radiation health protection measures.

  15. Sedimentary Environments Mapping in the Yellow Sea Using TanDEM-X and Optic Satellites

    Science.gov (United States)

    Ryu, J. H.; Lee, Y. K.; Kim, S. W.

    2017-12-01

    Due to land reclamation and dredging, 57% of China's coastal wetlands have disappeared since the 1950s, and the total area of tidal flats in South Korea decreased from approximately 2,800km2 in 1990 to 2392km2 in 2005(Qiu, 2011 and MLTM, 2010). Intertidal DEM and sedimentary facies are useful for understanding intertidal functions and monitoring their response to natural and anthropogenic actions. Highly accurate intertidal DEMs with 5-m resolution were generated based on the TanDEM-X interferometric SAR (InSAR) technique because TanDEM-X allows the acquisition of the coherent InSAR pairs with no time lag or approximately 10-second temporal baseline between master and slave SAR image. We successfully generated intertidal zone DEMs with 5-7-m spatial resolutions and interferometric height accuracies better than 0.15 m for three representative tidal flats on the west coast of the Korean Peninsula and one site of chinese coastal region in the Yellow Sea. Surface sediment classification based on remotely sensed data must circumspectly consider an effective critical grain size, water content, local topography, and intertidal structures. The earlier studies have some limitation that the classification map is not considered to analysis various environmental conditions. Therefore, the purpose of this study was minutely to mapping the surface sedimentary facies by analyzing the tidal channel, topography with multi-sensor remotely sensed data and in-situ data.

  16. Sweet Spot Supersymmetry and Composite Messengers

    International Nuclear Information System (INIS)

    Ibe, Masahiro; Kitano, Ryuichiro

    2007-01-01

    Sweet spot supersymmetry is a phenomenologically and cosmologically perfect framework to realize a supersymmetric world at short distance. We discuss a class of dynamical models of supersymmetry breaking and its mediation whose low-energy effective description falls into this framework. Hadron fields in the dynamical models play a role of the messengers of the supersymmetry breaking. As is always true in the models of the sweet spot supersymmetry, the messenger scale is predicted to be 10 5 GeV ∼ mess ∼ 10 GeV. Various values of the effective number of messenger fields N mess are possible depending on the choice of the gauge group

  17. Volume dips; spot price ranges narrow

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    This article is the September 1994 uranium market summary. Volume in the spot concentrates market fell below 1 million lbs U3O8. In total, twelve deals took place compared to 28 deals in August. Of the twelve deals, three took place in the spot concentrates market, two took place in the medium and long-term market, three in the conversion market, and four in the enrichment market. Restricted prices weakened, but unrestricted prices firmed slightly. The enrichment price range narrowed a bit

  18. Fast Keyword Spotting in Telephone Speech

    Directory of Open Access Journals (Sweden)

    J. Nouza

    2009-12-01

    Full Text Available In the paper, we present a system designed for detecting keywords in telephone speech. We focus not only on achieving high accuracy but also on very short processing time. The keyword spotting system can run in three modes: a an off-line mode requiring less than 0.1xRT, b an on-line mode with minimum (2 s latency, and c a repeated spotting mode, in which pre-computed values allow for additional acceleration. Its performance is evaluated on recordings of Czech spontaneous telephone speech using rather large and complex keyword lists.

  19. Transitional–turbulent spots and turbulent–turbulent spots in boundary layers

    Science.gov (United States)

    Wu, Xiaohua; Moin, Parviz; Wallace, James M.; Skarda, Jinhie; Lozano-Durán, Adrián; Hickey, Jean-Pierre

    2017-01-01

    Two observations drawn from a thoroughly validated direct numerical simulation of the canonical spatially developing, zero-pressure gradient, smooth, flat-plate boundary layer are presented here. The first is that, for bypass transition in the narrow sense defined herein, we found that the transitional–turbulent spot inception mechanism is analogous to the secondary instability of boundary-layer natural transition, namely a spanwise vortex filament becomes a Λ vortex and then, a hairpin packet. Long streak meandering does occur but usually when a streak is infected by a nearby existing transitional–turbulent spot. Streak waviness and breakdown are, therefore, not the mechanisms for the inception of transitional–turbulent spots found here. Rather, they only facilitate the growth and spreading of existing transitional–turbulent spots. The second observation is the discovery, in the inner layer of the developed turbulent boundary layer, of what we call turbulent–turbulent spots. These turbulent–turbulent spots are dense concentrations of small-scale vortices with high swirling strength originating from hairpin packets. Although structurally quite similar to the transitional–turbulent spots, these turbulent–turbulent spots are generated locally in the fully turbulent environment, and they are persistent with a systematic variation of detection threshold level. They exert indentation, segmentation, and termination on the viscous sublayer streaks, and they coincide with local concentrations of high levels of Reynolds shear stress, enstrophy, and temperature fluctuations. The sublayer streaks seem to be passive and are often simply the rims of the indentation pockets arising from the turbulent–turbulent spots. PMID:28630304

  20. Transitional-turbulent spots and turbulent-turbulent spots in boundary layers.

    Science.gov (United States)

    Wu, Xiaohua; Moin, Parviz; Wallace, James M; Skarda, Jinhie; Lozano-Durán, Adrián; Hickey, Jean-Pierre

    2017-07-03

    Two observations drawn from a thoroughly validated direct numerical simulation of the canonical spatially developing, zero-pressure gradient, smooth, flat-plate boundary layer are presented here. The first is that, for bypass transition in the narrow sense defined herein, we found that the transitional-turbulent spot inception mechanism is analogous to the secondary instability of boundary-layer natural transition, namely a spanwise vortex filament becomes a [Formula: see text] vortex and then, a hairpin packet. Long streak meandering does occur but usually when a streak is infected by a nearby existing transitional-turbulent spot. Streak waviness and breakdown are, therefore, not the mechanisms for the inception of transitional-turbulent spots found here. Rather, they only facilitate the growth and spreading of existing transitional-turbulent spots. The second observation is the discovery, in the inner layer of the developed turbulent boundary layer, of what we call turbulent-turbulent spots. These turbulent-turbulent spots are dense concentrations of small-scale vortices with high swirling strength originating from hairpin packets. Although structurally quite similar to the transitional-turbulent spots, these turbulent-turbulent spots are generated locally in the fully turbulent environment, and they are persistent with a systematic variation of detection threshold level. They exert indentation, segmentation, and termination on the viscous sublayer streaks, and they coincide with local concentrations of high levels of Reynolds shear stress, enstrophy, and temperature fluctuations. The sublayer streaks seem to be passive and are often simply the rims of the indentation pockets arising from the turbulent-turbulent spots.

  1. Transitional-turbulent spots and turbulent-turbulent spots in boundary layers

    Science.gov (United States)

    Wu, Xiaohua; Moin, Parviz; Wallace, James M.; Skarda, Jinhie; Lozano-Durán, Adrián; Hickey, Jean-Pierre

    2017-07-01

    Two observations drawn from a thoroughly validated direct numerical simulation of the canonical spatially developing, zero-pressure gradient, smooth, flat-plate boundary layer are presented here. The first is that, for bypass transition in the narrow sense defined herein, we found that the transitional-turbulent spot inception mechanism is analogous to the secondary instability of boundary-layer natural transition, namely a spanwise vortex filament becomes a ΛΛ vortex and then, a hairpin packet. Long streak meandering does occur but usually when a streak is infected by a nearby existing transitional-turbulent spot. Streak waviness and breakdown are, therefore, not the mechanisms for the inception of transitional-turbulent spots found here. Rather, they only facilitate the growth and spreading of existing transitional-turbulent spots. The second observation is the discovery, in the inner layer of the developed turbulent boundary layer, of what we call turbulent-turbulent spots. These turbulent-turbulent spots are dense concentrations of small-scale vortices with high swirling strength originating from hairpin packets. Although structurally quite similar to the transitional-turbulent spots, these turbulent-turbulent spots are generated locally in the fully turbulent environment, and they are persistent with a systematic variation of detection threshold level. They exert indentation, segmentation, and termination on the viscous sublayer streaks, and they coincide with local concentrations of high levels of Reynolds shear stress, enstrophy, and temperature fluctuations. The sublayer streaks seem to be passive and are often simply the rims of the indentation pockets arising from the turbulent-turbulent spots.

  2. The role of the intrinsic cholinergic system of the striatum: What have we learned from TAN recordings in behaving animals?

    Science.gov (United States)

    Apicella, Paul

    2017-09-30

    Cholinergic interneurons provide rich local innervation of the striatum and play an important role in controlling behavior, as evidenced by the variety of movement and psychiatric disorders linked to disrupted striatal cholinergic transmission. Much progress has been made in recent years regarding our understanding of how these interneurons contribute to the processing of information in the striatum. In particular, investigation of the activity of presumed striatal cholinergic interneurons, identified as tonically active neurons or TANs in behaving animals, has pointed to their role in the signaling and learning of the motivational relevance of environmental stimuli. Although the bulk of this work has been conducted in monkeys, several studies have also been carried out in behaving rats, but information remains rather disparate across studies and it is still questionable whether rodent TANs correspond to TANs described in monkeys. Consequently, our current understanding of the function of cholinergic transmission in the striatum is challenged by the rapidly growing, but often confusing literature on the relationship between TAN activity and specific behaviors. As regards the precise nature of the information conveyed by the cholinergic TANs, a recent influential view emphasized that these local circuit neurons may play a special role in the processing of contextual information that is important for reinforcement learning and selection of appropriate actions. This review provides a summary of recent progress in TAN physiology from which it is proposed that striatal cholinergic interneurons are crucial elements for flexible switching of behaviors under changing environmental conditions. Copyright © 2017 IBRO. Published by Elsevier Ltd. All rights reserved.

  3. Triggered tremor sweet spots in Alaska

    Science.gov (United States)

    Gomberg, Joan; Prejean, Stephanie

    2013-01-01

    To better understand what controls fault slip along plate boundaries, we have exploited the abundance of seismic and geodetic data available from the richly varied tectonic environments composing Alaska. A search for tremor triggered by 11 large earthquakes throughout all of seismically monitored Alaska reveals two tremor “sweet spots”—regions where large-amplitude seismic waves repeatedly triggered tremor between 2006 and 2012. The two sweet spots locate in very different tectonic environments—one just trenchward and between the Aleutian islands of Unalaska and Akutan and the other in central mainland Alaska. The Unalaska/Akutan spot corroborates previous evidence that the region is ripe for tremor, perhaps because it is located where plate-interface frictional properties transition between stick-slip and stably sliding in both the dip direction and laterally. The mainland sweet spot coincides with a region of complex and uncertain plate interactions, and where no slow slip events or major crustal faults have been noted previously. Analyses showed that larger triggering wave amplitudes, and perhaps lower frequencies (sweet spots also does not occur during slow slip events visually detectable in GPS data, although slow slip below the detection threshold may have facilitated tremor triggering.

  4. Hot-spot tectonics on Io

    Science.gov (United States)

    Mcewen, A. S.

    1985-01-01

    The thesis is that extensional tectonics and low-angle detachment faults probably occur on Io in association with the hot spots. These processes may occur on a much shorter timescale on Ion than on Earth, so that Io could be a natural laboratory for the study of thermotectonics. Furthermore, studies of heat and detachment in crustal extension on Earth and the other terresrial planets (especially Venus and Mars) may provide analogs to processes on Io. The geology of Io is dominated by volcanism and hot spots, most likely the result of tidal heating. Hot spots cover 1 to 2% of Io's surface, radiating at temperatures typically from 200 to 400 K, and occasionally up to 700K. Heat loss from the largest hot spots on Io, such as Loki Patera, is about 300 times the heat loss from Yellowstone, so a tremendous quantity of energy is available for volcanic and tectonic work. Active volcanism on Io results in a resurfacing rate as high as 10 cm per year, yet many structural features are apparent on the surface. Therefore, the tectonics must be highly active.

  5. Dramatic Change in Jupiter's Great Red Spot

    Science.gov (United States)

    Simon, A. A.; Wong, M. H.; Rogers, J. H.; Orton, G. S.; de Pater, I.; Asay-Davis, X.; Carlson, R. W.; Marcus, P. S.

    2015-01-01

    Jupiter's Great Red Spot (GRS) is one of its most distinct and enduring features, having been continuously observed since the 1800's. It currently spans the smallest latitude and longitude size ever recorded. Here we show analyses of 2014 Hubble spectral imaging data to study the color, structure and internal dynamics of this long-live storm.

  6. Hyperspectral analysis of columbia spotted frog habitat

    Science.gov (United States)

    Shive, J.P.; Pilliod, D.S.; Peterson, C.R.

    2010-01-01

    Wildlife managers increasingly are using remotely sensed imagery to improve habitat delineations and sampling strategies. Advances in remote sensing technology, such as hyperspectral imagery, provide more information than previously was available with multispectral sensors. We evaluated accuracy of high-resolution hyperspectral image classifications to identify wetlands and wetland habitat features important for Columbia spotted frogs (Rana luteiventris) and compared the results to multispectral image classification and United States Geological Survey topographic maps. The study area spanned 3 lake basins in the Salmon River Mountains, Idaho, USA. Hyperspectral data were collected with an airborne sensor on 30 June 2002 and on 8 July 2006. A 12-year comprehensive ground survey of the study area for Columbia spotted frog reproduction served as validation for image classifications. Hyperspectral image classification accuracy of wetlands was high, with a producer's accuracy of 96 (44 wetlands) correctly classified with the 2002 data and 89 (41 wetlands) correctly classified with the 2006 data. We applied habitat-based rules to delineate breeding habitat from other wetlands, and successfully predicted 74 (14 wetlands) of known breeding wetlands for the Columbia spotted frog. Emergent sedge microhabitat classification showed promise for directly predicting Columbia spotted frog egg mass locations within a wetland by correctly identifying 72 (23 of 32) of known locations. Our study indicates hyperspectral imagery can be an effective tool for mapping spotted frog breeding habitat in the selected mountain basins. We conclude that this technique has potential for improving site selection for inventory and monitoring programs conducted across similar wetland habitat and can be a useful tool for delineating wildlife habitats. ?? 2010 The Wildlife Society.

  7. Using TanDEM data for forest height estimation and change detection

    Science.gov (United States)

    Thiele, Antje; Dubois, Clémence; Boldt, Markus; Hinz, Stefan

    2016-10-01

    Mapping of forest coverage and forest changes became an increasing issue due to deforestation and forest degradation. Moreover, the estimation of related indicators such as carbon reduction, biomass and wood capacity is of large interest for industry and politics. As forest height is an important contributing parameter for these indicators, the region-wide estimation of forest heights is an essential step. This article investigates the accuracy potential of forest height estimation that can be reached by the current configuration of the two SAR satellites TerraSAR-X and TanDEM-X. Depending on the chosen acquisition mode and flight geometry, products of different quality can be achieved. Eight InSAR data sets showing different characteristics in geometric resolution, length of baseline, and mapping time, are processed and analyzed. To enable a thorough evaluation of the estimated heights, first-pulse LIDAR point clouds and aerial ortho-images are used as reference data.

  8. Valoración de activos financieros utilizando Montecarlo: cuando el mundo no es tan normal.

    Directory of Open Access Journals (Sweden)

    Cecilia Amaya Ochoa

    2010-05-01

    Full Text Available Valorar activos financieros cuando el mundo no es tan normal como asumen muchos modelos financieros exige un método flexible para operar con diversas distribuciones, el cual, adicionalmente, pueda incorporar discontinuidades como las que se dan en procesos estocásticos de salto. El método Monte Carlo cumple con esos requisitos, además de generar una buena aproximación y ser eficiente, lo cual lo convierte en el más adecuado para aquellos casos en los cuales no se cumple el supuesto de normalidad. Este artículo explica como se aplica este método para la valoración de activos financieros, particularmente opciones financieras, cuando el activo subyacente sigue un proceso de volatilidad estocástica o de salto-difusión.

  9. Decontamination and decommissioning of TAN radioactive liquid-waste-evaporator system (PM-2A). Final report

    International Nuclear Information System (INIS)

    Smith, D.L.

    1983-03-01

    This report describes the decontamination and decommissioning of the Test Area North (TAN) liquid waste evaporator (PM-2A). The PM-2A facility included the aboveground evaporator system, two underground holding tanks and feedlines, an electrical distribution subsystem, and one above ground concrete tank. Much surface soil of the PM-2A area was also radioactively contaminated. Stabilization of the liquid and sludge in the holding tanks, a major task, was achieved by pumping most of the liquid into 55-gal drums and mixing it with cement. The drums were buried in the Radioactive Waste Management Complex (RWMC). The remaining liquid and sludge were dried in place by layers of diatomaceous earth. The most contaminated surface soil was removed, and the area backfilled with clean topsoil and graded, reducing the surface radiation field to background. A 6-ft-high chain link fence now surrounds the area. Most of the area was seeded to crested wheatgrass. 46 figures, 9 tables

  10. Host range, growth property, and virulence of the smallpox vaccine: Vaccinia virus Tian Tan strain

    International Nuclear Information System (INIS)

    Fang Qing; Yang Lin; Zhu Weijun; Liu Li; Wang Haibo; Yu Wenbo; Xiao Genfu; Tien Po; Zhang Linqi; Chen Zhiwei

    2005-01-01

    Vaccinia Tian Tan (VTT) was used as a vaccine against smallpox in China for millions of people before 1980, yet the biological characteristics of the virus remain unclear. We have characterized VTT with respect to its host cell range, growth properties in vitro, and virulence in vivo. We found that 11 of the 12 mammalian cell lines studied are permissive to VTT infection whereas one, CHO-K1, is non-permissive. Using electron microscopy and sequence analysis, we found that the restriction of VTT replication in CHO-K1 is at a step before viral maturation probably due to the loss of the V025 gene. Moreover, VTT is significantly less virulent than vaccinia WR but remains neurovirulent in mice and causes significant body weight loss after intranasal inoculation. Our data demonstrate the need for further attenuation of VTT to serve either as a safer smallpox vaccine or as a live vaccine vector for other pathogens

  11. Exploring the Potential of TanDEM-X Data in Rice Monitoring

    Science.gov (United States)

    Erten, E.

    2015-12-01

    In this work, phenological parameters such as growth stage, calendar estimation, crop density and yield estimation for rice fields are estimated employing TanDEM-X data. Currently, crop monitoring is country-dependent. Most countries have databases based on cadastral information and annual farmer inputs. Inaccuracies are coming from wrong or missing farmer declarations and/or coarsely updated cadastral boundary definitions. This leads to inefficient regulation of the market, frauds as well as to ecological risks. An accurate crop calendar is also missing, since farmers provide estimations in advance and there is no efficient way to know the growth status over large plantations. SAR data is of particular interest for these purposes. The proposed method includes two step approach including field detection and phenological state estimation. In the context of precise farming it is substantial to define field borders which are usually changing every cultivation period. Linking the SAR inherit properties to transplanting practice such as irrigation, the spatial database of rice-planted agricultural crops can be updated. Boundaries of agricultural fields will be defined in the database, and assignments of crops and sowing dates will be continuously updated by our monitoring system considering that sowing practice variously changes depending on the field owner decision. To define and segment rice crops, the system will make use of the fact that rice fields are characterized as flooded parcels separated by path networks composed by soil or rare grass. This natural segmentation is well detectable by inspecting low amplitude and coherence values of bistatic acquisitions. Once the field borders are defined, the phenology estimation of crops monitored at any time is the key point of monitoring. In this aspect the wavelength and the polarization option of TanDEM-X are enough to characterize the small phenological changes. The combination of bistatic interferometry and Radiative

  12. Plasma spot welding of ferritic stainless steels

    Directory of Open Access Journals (Sweden)

    Lešnjak, A.

    2002-06-01

    Full Text Available Plasma spot welding of ferritic stainless steels is studied. The study was focused on welding parameters, plasma and shielding gases and the optimum welding equipment. Plasma-spot welded overlap joints on a 0.8 mm thick ferritic stainless steel sheet were subjected to a visual examination and mechanical testing in terms of tension-shear strength. Several macro specimens were prepared. Plasma spot welding is suitable to use the same gas as shielding gas and as plasma gas, i.e., a 98 % Ar/2 % H 2 gas mixture. Tension-shear strength of plasma-spot welded joints was compared to that of resistance-spot welded joints. It was found that the resistance welded joints withstand a somewhat stronger load than the plasma welded joints due to a larger weld spot diameter of the former. Strength of both types of welded joints is approximately the same.

    El artículo describe el proceso de soldeo de aceros inoxidables ferríticos por puntos con plasma. La investigación se centró en el establecimiento de los parámetros óptimos de la soldadura, la definición del gas de plasma y de protección más adecuado, así como del equipo óptimo para la realización de la soldadura. Las uniones de láminas de aceros inoxidables ferríticos de 0,8 mm de espesor, soldadas a solape por puntos con plasma, se inspeccionaron visualmente y se ensayaron mecánicamente mediante el ensayo de cizalladura por tracción. Se realizaron macro pulidos. Los resultados de la investigación demostraron que la solución más adecuada para el soldeo por puntos con plasma es elegir el mismo gas de plasma que de protección. Es decir, una mezcla de 98 % de argón y 2 % de hidrógeno. La resistencia a la cizalladura por tracción de las uniones soldadas por puntos con plasma fue comparada con la resistencia de las uniones soldadas por resistencia por puntos. Se llegó a la conclusión de que las uniones soldadas por resistencia soportan una carga algo mayor que la uniones

  13. Turbulent Region Near Jupiter's Great Red Spot

    Science.gov (United States)

    1997-01-01

    True and false color mosaics of the turbulent region west of Jupiter's Great Red Spot. The Great Red Spot is on the planetary limb on the right hand side of each mosaic. The region west (left) of the Great Red Spot is characterized by large, turbulent structures that rapidly change in appearance. The turbulence results from the collision of a westward jet that is deflected northward by the Great Red Spot into a higher latitude eastward jet. The large eddies nearest to the Great Red Spot are bright, suggesting that convection and cloud formation are active there.The top mosaic combines the violet (410 nanometers) and near infrared continuum (756 nanometers) filter images to create a mosaic similar to how Jupiter would appear to human eyes. Differences in coloration are due to the composition and abundance of trace chemicals in Jupiter's atmosphere. The lower mosaic uses the Galileo imaging camera's three near-infrared (invisible) wavelengths (756 nanometers, 727 nanometers, and 889 nanometers displayed in red, green, and blue) to show variations in cloud height and thickness. Light blue clouds are high and thin, reddish clouds are deep, and white clouds are high and thick. Purple most likely represents a high haze overlying a clear deep atmosphere. Galileo is the first spacecraft to distinguish cloud layers on Jupiter.The mosaic is centered at 16.5 degrees south planetocentric latitude and 85 degrees west longitude. The north-south dimension of the Great Red Spot is approximately 11,000 kilometers. The smallest resolved features are tens of kilometers in size. North is at the top of the picture. The images used were taken on June 26, 1997 at a range of 1.2 million kilometers (1.05 million miles) by the Solid State Imaging (SSI) system on NASA's Galileo spacecraft.The Jet Propulsion Laboratory, Pasadena, CA manages the Galileo mission for NASA's Office of Space Science, Washington, DC. JPL is an operating division of California Institute of Technology (Caltech

  14. SPOT: How good for geology? A comparison with LANDSAT MSS

    Science.gov (United States)

    Sesoeren, A.

    1986-12-01

    Geological interpretation possibilities of SPOT MSS and LANDSAT MSS positive prints enlarged to the same scale were compared, using as a test area part of the Jebel Amour (Algeria). The SPOT imagery offers many advantages, filling the gap between remote sensing from space and aerial photography. The best results by visual interpretation are obtained in combining SPOT for the required details with LANDSAT for the synoptic veiw. Further improvements are expected from the use of SPOT stereo-pairs.

  15. Spotted-Leaf Mutants of Rice (Oryza sativa

    Directory of Open Access Journals (Sweden)

    Qi-na HUANG

    2010-12-01

    Full Text Available Many rice spotted-leaf (spl mutants are ideal sources for understanding the mechanisms involved in blast resistance, bacterial blight resistance and programmed cell death in plants. The genetic controls of 50 spotted-leaf mutants in rice have been characterized and a few spotted-leaf genes have been isolated as well. This article reviews the origin, genetic modes, isolation and characterization of spotted-leaf genes responsible for their phenotypes, and their resistance responses to main rice diseases.

  16. Changes in serum 25-hydroxyvitamin D and cholecalciferol after one whole-body exposure in a commercial tanning bed

    DEFF Research Database (Denmark)

    Langdahl, Jacob H; Schierbeck, Louise Lind; Bang, Ulrich Christian

    2012-01-01

    We wanted to evaluate the cutaneous synthesis of 25OHD and cholecalciferol after one whole-body exposure to ultraviolet radiation type B (UVB) in a randomized setup. Healthy volunteers were randomized to one whole-body exposure in a commercial tanning bed with UVB emission (UVB/UVA ratio 1...

  17. An audit of Yellow Pages telephone directory listings of indoor tanning facilities and services in New Zealand, 1992--2006.

    Science.gov (United States)

    Jopson, Janet A; Reeder, Anthony I

    2008-08-01

    To document the number and variety of indoor tanning facilities and services in New Zealand, and to analyse changes from 1992 to 2006. Hard copies of the Yellow Pages telephone directory listings of all 18 New Zealand regions for 1992, 1996, 2001 and 2006 were examined. Entries under solaria and sun bed headings were supplemented with entries where sun bed/indoor tanning services were explicitly advertised under hairdressing, beauty therapy/supplies, and health and fitness centre categories. Duplicate listings were eliminated. From 1992 to 2006, inclusive, there was a 241% increase in the number of businesses that advertised some form of indoor tanning service in the NZ Yellow Pages telephone directories. There was a 525% increase in the number of wholesale trade providers, indicative of expansion in the industry, overall. Hire services also increased. The reported findings are likely to represent an underestimate of the total numbers of facilities and providers. Substantial growth in indoor tanning facilities and services in New Zealand has occurred since 1992. The evidence of potential serious health risks from sunbed use, in conjunction with evidence of irresponsibility among some providers, suggests a need for regulatory controls to strengthen existing voluntary guidelines. With legislation recently introduced for the states of Victoria and South Australia, and proposed in Queensland and Western Australia before the end of 2008; it would be timely for New Zealand authorities to collaborate with those drafting that legislation.

  18. Control of electrical resistivity of TaN thin films by reactive sputtering for embedded passive resistors

    International Nuclear Information System (INIS)

    Kang, S.M.; Yoon, S.G.; Suh, S.J.; Yoon, D.H.

    2008-01-01

    Tantalum nitride thin films were deposited by radio frequency (RF) reactive sputtering at various N 2 /Ar gas flow ratios and working pressures to examine the change of their electrical resistivity. From the X-ray diffraction (XRD) and four-point probe sheet resistance measurements of the TaN x films, it was found that the change of the crystalline structures of the TaN x films as a function of the N 2 partial pressure caused an abrupt change of the electrical resistivity. When the hexagonal structure TaN thin films changed to an f.c.c. structure, the sheet resistance increased from 16 Ω/sq to 1396 Ω/sq. However, we were able to control the electrical resistivity of the TaN thin film in the range from 69 Ω/sq to 875 Ω/sq, with no change in crystalline structure, within a certain range of working pressures. The size of the grains in the scanning electron microscopy (SEM) images seemed to decrease with the increase of working pressure

  19. Generalized McClain-Roth-O'Brien-Tan theorem and the string free energy at higher genus

    International Nuclear Information System (INIS)

    Leblanc, Y.

    1990-01-01

    We discuss a natural generalization of the McClain-Roth-O'Brien-Tan theorem in the context of interacting bosonic strings at finite temperature and explain a discrepancy between the Polyakov path-integral approach and the multiloop operator formalism in the calculation of the string free energy at higher genus

  20. Atomic resolution imaging of precipitate transformation from cubic TaN to tetragonal CrTaN

    DEFF Research Database (Denmark)

    Danielsen, Hilmar Kjartansson; Hald, John; Somers, Marcel A. J.

    2012-01-01

    in the matrix. Using atomic resolution transmission electron microscopy, the current work demonstrates that metastable cubic TaN precipitates in a complex steel gradually transform compositionally and crystallographically into stable tetragonal CrTaN precipitates under the influence of Cr indiffusion from...

  1. DETERMINING LIGHTFASTNESS PROPERTIES OF VEGETABLE TANNINS AND CHEMICAL PROPERTIES OF THE LEATHERS TANNED WITH MODIFIED MIMOSA AND QUEBRACHO

    Directory of Open Access Journals (Sweden)

    OMUR Sukru

    2016-05-01

    Full Text Available The vegetable tannins are the oldest tanning agents used in leather industry. They give their natural character and colour to the leathers which they are applied to, but they have the disadvantage of colour change when they are exposed to light for prolonged times. In this study light fastness properties of leathers tanned with mimosa, quebracho, valonea and chestnut tannins were measured. Lightfastness properties of mimosa and quebracho tannins were found lower. Then these tannins were modified with sulphitation, novalac synthesis and sulphomethylation processes. Lightfastness and determination of volatile matter, determination of matter soluble in dichloromethane, determination of sulphated total ash and sulphated water-insoluble ash, determination of water soluble matter, water soluble inorganic matter and water soluble organic matter, determination of nitrogen content and hide substance, calculation of degree of tannage determination of formaldehyde content analyses were performed to the leathers tanned with modified mimosa and quebracho tannins. From comparison of results, it was understood that sulpmethylation process can be used for production of leathers with higher lightfastness and without major change on chemical properties. When chemical properties of leathers tanned with modified quebracho and mimosa are considered: volatile matter, sulphated total ash and sulphated water- insoluble ash, water soluble matter, water soluble inorganic matter and water soluble organic matter, hide substance and formaldehyde contents were found compatible with standard mimosa and quebracho. However degree of tannage and matter soluble in dichloromethane values were found lower, which means some enhancements in modification or fatliquoring process should be considered.

  2. Heterotrophic bacterial production on solid fish waste: TAN and nitrate as nitrogen source under practical RAS conditions

    NARCIS (Netherlands)

    Schneider, O.; Sereti, V.; Eding, E.H.; Verreth, J.A.J.

    2007-01-01

    The drumfilter effluent from a recirculation aquaculture system (RAS) can be used as substrate for heterotrophic bacteria production. This biomass can be re-used as aquatic feed. RAS effluents are rich in nitrate and low in total ammonia nitrogen (TAN). This might result in 20% lower bacteria

  3. Characteristics of the Energetic Igniters Through Integrating B/Ti Nano-Multilayers on TaN Film Bridge.

    Science.gov (United States)

    Yan, YiChao; Shi, Wei; Jiang, HongChuan; Cai, XianYao; Deng, XinWu; Xiong, Jie; Zhang, WanLi

    2015-12-01

    The energetic igniters through integrating B/Ti nano-multilayers on tantalum nitride (TaN) ignition bridge are designed and fabricated. The X-ray diffraction (XRD) and temperature coefficient of resistance (TCR) results show that nitrogen content has a great influence on the crystalline structure and TCR. TaN films under nitrogen ratio of 0.99 % exhibit a near-zero TCR value of approximately 10 ppm/°C. The scanning electron microscopy demonstrates that the layered structure of the B/Ti multilayer films is clearly visible with sharp and smooth interfaces. The electrical explosion characteristics employing a capacitor discharge firing set at the optimized charging voltage of 45 V reveal an excellent explosion performance by (B/Ti) n /TaN integration film bridge with small ignition delay time, high explosion temperature, much more bright flash of light, and much large quantities of the ejected product particles than TaN film bridge.

  4. 7 CFR 27.93 - Bona fide spot markets.

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Spot Markets § 27.93 Bona fide spot markets. The following markets have been determined, after investigation, and are hereby... 7 Agriculture 2 2010-01-01 2010-01-01 false Bona fide spot markets. 27.93 Section 27.93...

  5. Sowing rates for reforestation by the seed-spotting method

    Science.gov (United States)

    Gilbert H. Schubert; Harry A. Fowells

    1964-01-01

    Presents guides to determine the number of seeds to sow per spot and the number of spots required per acre to obtain acceptable stocking. Based on theoretical probabilities, these guides were found to be reasonably close to actual field results When the probability-of-success was at least 55 percent. To compensate for lower actual stocking, increase the number of spots...

  6. 7 CFR 28.424 - Strict Low Middling Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Strict Low Middling Spotted Color. 28.424 Section 28.424 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Spotted Color. Strict Low Middling Spotted Color is color which is within the range represented by a set...

  7. 7 CFR 28.421 - Good Middling Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Good Middling Spotted Color. 28.421 Section 28.421 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Color. Good Middling Spotted Color is color which is better than Strict Middling Spotted Color. ...

  8. 7 CFR 28.426 - Strict Good Ordinary Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Strict Good Ordinary Spotted Color. 28.426 Section 28.426 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Spotted Color. Strict Good Ordinary Spotted Color is color which is within the range represented by a set...

  9. White Spot Syndrome Virus infection in Penaeus monodon is ...

    Indian Academy of Sciences (India)

    2013-11-06

    Nov 6, 2013 ... White Spot Syndrome Virus (WSSV) is a major pathogen in shrimp aquaculture, and its rampant spread has resulted in great economic loss. ... has been increasingly hampered by white spot syndrome disease caused by White Spot ..... metabolic proteins have additional roles in immunity and transcriptional ...

  10. Spot-Welding Gun With Pivoting Twin-Collet Assembly

    Science.gov (United States)

    Nguyen, Francis; Simpson, Gareth; Hoult, William S.

    1996-01-01

    Modified spot-welding gun includes pivoting twin-collet assembly that holds two spot-welding electrodes. Designed to weld highly conductive (30 percent gold) brazing-alloy foils to thin nickel alloy workpieces; also suitable for other spot-welding applications compatible with two-electrode configuration.

  11. Great red spot dependence on solar activity

    International Nuclear Information System (INIS)

    Schatten, K.H.

    1979-01-01

    A new inquiry has been made into the question of whether Jupiter's Great Red Spot shows a solar activity dependence. From 1892 to 1947 a clear correlation was present. A dearth of sightings in the seventeenth century, along with the Maunder Minimum, further supports the relation. An anticorrelation, however, from l948 to l967 removed support for such an effect. The old observations have reexamined and recent observations have also been studied. The author reexamines this difficult question and suggests a possible physical mechanism for a Sun-Jovian weather relation. Prinn and Lewis' conversion reaction of Phosphine gas to triclinic red phosphorous crystals is a reaction dependent upon solar radiation. It may explain the dependence found, as well as the striking appearance of the Great Red Spot in the UV

  12. Dynamically variable spot size laser system

    Science.gov (United States)

    Gradl, Paul R. (Inventor); Hurst, John F. (Inventor); Middleton, James R. (Inventor)

    2012-01-01

    A Dynamically Variable Spot Size (DVSS) laser system for bonding metal components includes an elongated housing containing a light entry aperture coupled to a laser beam transmission cable and a light exit aperture. A plurality of lenses contained within the housing focus a laser beam from the light entry aperture through the light exit aperture. The lenses may be dynamically adjusted to vary the spot size of the laser. A plurality of interoperable safety devices, including a manually depressible interlock switch, an internal proximity sensor, a remotely operated potentiometer, a remotely activated toggle and a power supply interlock, prevent activation of the laser and DVSS laser system if each safety device does not provide a closed circuit. The remotely operated potentiometer also provides continuous variability in laser energy output.

  13. Experimental and simulated strength of spot welds

    DEFF Research Database (Denmark)

    Nielsen, Chris Valentin; Bennedbæk, Rune A.K.; Larsen, Morten B.

    2014-01-01

    Weld strength testing of single spots in DP600 steel is presented for the three typical testing procedures, i.e. tensile-shear, cross-tension and peel testing. Spot welds are performed at two sets of welding parameters and strength testing under these conditions is presented by load......-elongation curves revealing the maximum load and the elongation at break. Welding and strength testing is simulated by SORPAS® 3D, which allows the two processes to be prepared in a combined simulation, such that the simulated welding properties are naturally applied to the simulation of strength testing. Besides...... the size and shape of the weld nugget, these properties include the new strength of the material in the weld and the heat affected zone based on the predicted hardness resulting from microstructural phase changes simulated during cooling of the weld before strength testing. Comparisons between overall...

  14. SPS remanent radiation the warm spots

    CERN Document Server

    Billen, R

    1998-01-01

    The remanent radiation in the SPS ring is measured after each operational period. We all know very well the "hot spots" in the dedicated regions for particle injection and extraction. So far, not a lot of attention has been paid to those regions where there are clear traces of radiation, without an obvious reason. From an operational point of view, these regions might be quite important, since they could reveal a specific problem. This paper will look into those "warm spots", their location in the SPS ring and the transverse plane in which the radiation originates. Some classification of typical problem classes is made, as well as hints to the possible origins of the radiation problems.

  15. Sustainable control of white spot disease

    DEFF Research Database (Denmark)

    Heinecke, Rasmus Demuth; Buchmann, Kurt

    White spot disease caused by the ciliate Ichthyophthirius multifiliis Fouquet, 1876 is a serious problem in freshwater aquaculture worldwide. This parasitosis is of frequent occurrence in both conventional earth pond fish farms and in fish farms using new high technology re-circulation systems...... all had significant influences on parasite survival. Strategic treatment using the environmentally friendly chemical sodium percarbonate in combination with continuous micro-filtering of the pond water is suggested for control and management of this parasitosis....

  16. Laser induced single spot oxidation of titanium

    Energy Technology Data Exchange (ETDEWEB)

    Jwad, Tahseen, E-mail: taj355@bham.ac.uk; Deng, Sunan; Butt, Haider; Dimov, S.

    2016-11-30

    Highlights: • A new high resolution laser induced oxidation (colouring) method is proposed (single spot oxidation). • The method is applied to control oxide films thicknesses and hence colours on titanium substrates in micro-scale. • The method enable imprinting high resolution coloured image on Ti substrate. • Optical and morphological periodic surface structures are also produced by an array of oxide spots using the proposed method. • Colour coding of two colours into one field is presented. - Abstract: Titanium oxides have a wide range of applications in industry, and they can be formed on pure titanium using different methods. Laser-induced oxidation is one of the most reliable methods due to its controllability and selectivity. Colour marking is one of the main applications of the oxidation process. However, the colourizing process based on laser scanning strategies is limited by the relative large processing area in comparison to the beam size. Single spot oxidation of titanium substrates is proposed in this research in order to increase the resolution of the processed area and also to address the requirements of potential new applications. The method is applied to produce oxide films with different thicknesses and hence colours on titanium substrates. High resolution colour image is imprinted on a sheet of pure titanium by converting its pixels’ colours into laser parameter settings. Optical and morphological periodic surface structures are also produced by an array of oxide spots and then analysed. Two colours have been coded into one field and the dependencies of the reflected colours on incident and azimuthal angles of the light are discussed. The findings are of interest to a range of application areas, as they can be used to imprint optical devices such as diffusers and Fresnel lenses on metallic surfaces as well as for colour marking.

  17. Laser induced single spot oxidation of titanium

    International Nuclear Information System (INIS)

    Jwad, Tahseen; Deng, Sunan; Butt, Haider; Dimov, S.

    2016-01-01

    Highlights: • A new high resolution laser induced oxidation (colouring) method is proposed (single spot oxidation). • The method is applied to control oxide films thicknesses and hence colours on titanium substrates in micro-scale. • The method enable imprinting high resolution coloured image on Ti substrate. • Optical and morphological periodic surface structures are also produced by an array of oxide spots using the proposed method. • Colour coding of two colours into one field is presented. - Abstract: Titanium oxides have a wide range of applications in industry, and they can be formed on pure titanium using different methods. Laser-induced oxidation is one of the most reliable methods due to its controllability and selectivity. Colour marking is one of the main applications of the oxidation process. However, the colourizing process based on laser scanning strategies is limited by the relative large processing area in comparison to the beam size. Single spot oxidation of titanium substrates is proposed in this research in order to increase the resolution of the processed area and also to address the requirements of potential new applications. The method is applied to produce oxide films with different thicknesses and hence colours on titanium substrates. High resolution colour image is imprinted on a sheet of pure titanium by converting its pixels’ colours into laser parameter settings. Optical and morphological periodic surface structures are also produced by an array of oxide spots and then analysed. Two colours have been coded into one field and the dependencies of the reflected colours on incident and azimuthal angles of the light are discussed. The findings are of interest to a range of application areas, as they can be used to imprint optical devices such as diffusers and Fresnel lenses on metallic surfaces as well as for colour marking.

  18. Heap hot spots visualization in Java

    OpenAIRE

    Mahdavi, Babak; Driesen, Karel

    2001-01-01

    Data memory (heap) management is a particularly important feature of the Java programming environment. The visualization of memory location in form of hot spots can help to see how the data cache is used during the execution of a program. The behavior of such executed program can be thus speculated. Through a series of experiments using Load and Store trace files, some pertinent aspect of data memory accessing, can be visualized, including the frequency of how often the Java virtual machine r...

  19. Forecasting European thermal coal spot prices

    Directory of Open Access Journals (Sweden)

    Alicja Krzemień

    2015-01-01

    Finally, in order to analyse the time series model performance a Generalized Regression Neural Network (GRNN was used and its performance compared against the whole AR(2 process. Empirical results obtained confirmed that there is no statistically significant difference between both methods. The GRNN analysis also allowed pointing out the main drivers that move the European Thermal Coal Spot prices: crude oil, USD/CNY change and supply side drivers.

  20. Ultrahigh lattice thermal conductivity in topological semimetal TaN caused by a large acoustic-optical gap.

    Science.gov (United States)

    Guo, San-Dong; Liu, Bang-Gui

    2018-03-14

    Topological semimetals may have potential applications such as in topological qubits, spintronics and quantum computations. Efficient heat dissipation is a key factor for the reliability and stability of topological semimetal-based nano-electronics devices, which is closely related to high thermal conductivity. In this work, the elastic properties and lattice thermal conductivity of TaN are investigated using first-principles calculations and the linearized phonon Boltzmann equation within the single-mode relaxation time approximation. According to the calculated bulk modulus, shear modulus and C 44 , TaN can be regarded as a potential incompressible and hard material. The room-temperature lattice thermal conductivity is predicted to be 838.62 [Formula: see text] along the a axis and 1080.40 [Formula: see text] along the c axis, showing very strong anisotropy. It is found that the lattice thermal conductivity of TaN is several tens of times higher than other topological semimetals, such as TaAs, MoP and ZrTe, which is due to the very longer phonon lifetimes for TaN than other topological semimetals. The very different atomic masses of Ta and N atoms lead to a very large acoustic-optical band gap, and then prohibit the scattering between acoustic and optical phonon modes, which gives rise to very long phonon lifetimes. Calculated results show that isotope scattering has little effect on lattice thermal conductivity, and that phonons with mean free paths larger than 20 (80) [Formula: see text] along the c direction at 300 K have little contribution to the total lattice thermal conductivity. This work implies that TaN-based nano-electronics devices may be more stable and reliable due to efficient heat dissipation, and motivates further experimental works to study lattice thermal conductivity of TaN.

  1. Ultrahigh lattice thermal conductivity in topological semimetal TaN caused by a large acoustic-optical gap

    Science.gov (United States)

    Guo, San-Dong; Liu, Bang-Gui

    2018-03-01

    Topological semimetals may have potential applications such as in topological qubits, spintronics and quantum computations. Efficient heat dissipation is a key factor for the reliability and stability of topological semimetal-based nano-electronics devices, which is closely related to high thermal conductivity. In this work, the elastic properties and lattice thermal conductivity of TaN are investigated using first-principles calculations and the linearized phonon Boltzmann equation within the single-mode relaxation time approximation. According to the calculated bulk modulus, shear modulus and C 44, TaN can be regarded as a potential incompressible and hard material. The room-temperature lattice thermal conductivity is predicted to be 838.62 W~m-1~K^{-1} along the a axis and 1080.40 W~m-1~K^{-1} along the c axis, showing very strong anisotropy. It is found that the lattice thermal conductivity of TaN is several tens of times higher than other topological semimetals, such as TaAs, MoP and ZrTe, which is due to the very longer phonon lifetimes for TaN than other topological semimetals. The very different atomic masses of Ta and N atoms lead to a very large acoustic-optical band gap, and then prohibit the scattering between acoustic and optical phonon modes, which gives rise to very long phonon lifetimes. Calculated results show that isotope scattering has little effect on lattice thermal conductivity, and that phonons with mean free paths larger than 20 (80) μm along the c direction at 300 K have little contribution to the total lattice thermal conductivity. This work implies that TaN-based nano-electronics devices may be more stable and reliable due to efficient heat dissipation, and motivates further experimental works to study lattice thermal conductivity of TaN.

  2. DNA-nanostructure-assembly by sequential spotting

    Directory of Open Access Journals (Sweden)

    Breitenstein Michael

    2011-11-01

    Full Text Available Abstract Background The ability to create nanostructures with biomolecules is one of the key elements in nanobiotechnology. One of the problems is the expensive and mostly custom made equipment which is needed for their development. We intended to reduce material costs and aimed at miniaturization of the necessary tools that are essential for nanofabrication. Thus we combined the capabilities of molecular ink lithography with DNA-self-assembling capabilities to arrange DNA in an independent array which allows addressing molecules in nanoscale dimensions. Results For the construction of DNA based nanostructures a method is presented that allows an arrangement of DNA strands in such a way that they can form a grid that only depends on the spotted pattern of the anchor molecules. An atomic force microscope (AFM has been used for molecular ink lithography to generate small spots. The sequential spotting process allows the immobilization of several different functional biomolecules with a single AFM-tip. This grid which delivers specific addresses for the prepared DNA-strand serves as a two-dimensional anchor to arrange the sequence according to the pattern. Once the DNA-nanoarray has been formed, it can be functionalized by PNA (peptide nucleic acid to incorporate advanced structures. Conclusions The production of DNA-nanoarrays is a promising task for nanobiotechnology. The described method allows convenient and low cost preparation of nanoarrays. PNA can be used for complex functionalization purposes as well as a structural element.

  3. Hipotiroidismo subclínico, ni tan asintomático, ni tan inofensivo Subclinical hypothyroidism neither so asymptomatic nor so harmless

    Directory of Open Access Journals (Sweden)

    Marelys Yanes Quesada

    2009-04-01

    Full Text Available El hipotiroidismo subclínico es la condición definida por la elevación de la hormona estimulante del tiroides, en presencia de secreción de hormonas tiroideas (T3 y T4 normales para el rango de referencia. Sus manifestaciones clínicas no son tan nulas como lo define el término subclínico. Si se hace un correcto interrogatorio y examen clínico se pueden encontrar alteraciones en diversos sistemas y órganos que perjudican la calidad de vida de los pacientes afectos e incrementan su morbimortalidad. Durante el embarazo, la entidad cobra especial atención debido a la repercusión en el feto de la alteración de su desarrollo. En los pacientes ancianos es de vital importancia su diagnóstico, debido al incremento de la prevalencia de la entidad en este grupo y la repercusión sobre la calidad de vida. El presente trabajo tiene como objetivo revisar las alteraciones clínicas que se puedan presentar en el hipotiroidismo subclínico, así como en situaciones especiales de la vida (embarazo y senectud.Subclinical hypothyroidism is the condition defined by the raise of thyroid-stimulating hormone in presence of normal thyroid hormone secretion (T3 and T4 for reference rank. Its clinical manifestations are not so nulls as defines the subclinical term. If an appropriate questioning and clinical examination is made it is possible to find alterations in many systems and organs harming the quality of life of patients affected and to increase its morbidity and mortality. During pregnancy this entity acquires a special attention due to repercussion on fetal development alteration. In elderly patients is essential its diagnosis due to entity prevalence increase on this group and the repercussion on quality of life. Aim of present paper is to review the clinical alterations that may be present in subclinical hypothyroidism, as well as in special situations of life (pregnancy and senescence.

  4. Superluminal Spot Pair Events in Astronomical Settings: Sweeping Beams

    Science.gov (United States)

    Nemiroff, Robert J.

    2015-02-01

    Sweeping beams of light can cast spots moving with superluminal speeds across scattering surfaces. Such faster-than-light speeds are well-known phenomena that do not violate special relativity. It is shown here that under certain circumstances, superluminal spot pair creation and annihilation events can occur that provide unique information to observers. These spot pair events are not particle pair events-they are the sudden creation or annihilation of a pair of relatively illuminated spots on a scattering surface. Real spot pair illumination events occur unambiguously on the scattering surface when spot speeds diverge, while virtual spot pair events are observer dependent and perceived only when real spot radial speeds cross the speed of light. Specifically, a virtual spot pair creation event will be observed when a real spot's speed toward the observer drops below c, while a virtual spot pair annihilation event will be observed when a real spot's radial speed away from the observer rises above c. Superluminal spot pair events might be found angularly, photometrically, or polarimetrically, and might carry useful geometry or distance information. Two example scenarios are briefly considered. The first is a beam swept across a scattering spherical object, exemplified by spots of light moving across Earth's Moon and pulsar companions. The second is a beam swept across a scattering planar wall or linear filament, exemplified by spots of light moving across variable nebulae including Hubble's Variable Nebula. In local cases where the sweeping beam can be controlled and repeated, a three-dimensional map of a target object can be constructed. Used tomographically, this imaging technique is fundamentally different from lens photography, radar, and conventional lidar.

  5. Experimental Evidence for Linear Metal-Azide Coordination: The Binary Group 5 Azides [Nb(N3)5], [Ta(N3)5], [Nb(N3)6], and [Ta(N3)6], and 1:1 Acetonitrile Adducts [Nb(N3)5(CH3CN)] and (Ta(N3)5(CH3CN))

    Science.gov (United States)

    2006-03-20

    significantly longer than the equatorial ones, as expected from VSEPR argu- ments.[29] In contrast, the axial M-N-N arrangements in [Nb(N3)5] and [Ta(N3)5...Int. Ed. 2000, 39, 2108. [29] a) R. J. Gillespie, I. Hargittai, The VSEPR Model of Molecular Geometry, Allyn and Bacon, Needham Heights, MA, 1991; b

  6. Experimental Evidence for Linear Metal-Azide Bonds. The Binary Group 5 Azides Nb(N3)5, Ta(N3)5, [Nb(N3)6]- and [Ta(N3)6]-, and 1:1 Adducts of Nb(N3)5 and [Ta(N3)5 with CH3CN] (POSTPRINT)

    Science.gov (United States)

    2006-04-27

    the equatorial ones, as expected from VSEPR argu- ments.[29] In contrast, the axial M-N-N arrangements in [Nb(N3)5] and [Ta(N3)5] are calculated to be...2108. [29] a) R. J. Gillespie, I. Hargittai, The VSEPR Model of Molecular Geometry, Allyn and Bacon, Needham Heights, MA, 1991; b) R. J. Gillespie, P

  7. Superluminal Sweeping Spot Pair Events in Astronomical Settings

    Science.gov (United States)

    Nemiroff, Robert J.

    2015-01-01

    Sweeping beams of light can cast spots that move superluminally across scattering surfaces. Such faster-than-light speeds are well-known phenomena that do not violate special relativity. It is shown that under certain circumstances, superluminal spot pair creation and annihilation events can occur that provide unique information to observers. These spot pair events are not particle pair events -- they are the sudden creation or annihilation of a pair of relatively illuminated spots on a scattering surface. Astronomical settings where superluminal spot pairs might be found include Earth's Moon, passing asteroids, pulsars, and variable nebula. Potentially recoverable information includes three dimensional imaging, relative geometric size factors, and distances.

  8. 7 CFR 28.414 - Strict Low Middling Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... CONTAINER REGULATIONS COTTON CLASSING, TESTING, AND STANDARDS Standards Light Spotted Cotton § 28.414 Strict Low Middling Light Spotted Color. Strict Low Middling Light Spotted Color is color which in spot or...

  9. Time Resolved X-Ray Spot Size Diagnostic

    CERN Document Server

    Richardson, Roger; Falabella, Steven; Guethlein, Gary; Raymond, Brett; Weir, John

    2005-01-01

    A diagnostic was developed for the determination of temporal history of an X-ray spot. A pair of thin (0.5 mm) slits image the x-ray spot to a fast scintillator which is coupled to a fast detector, thus sampling a slice of the X-Ray spot. Two other scintillator/detectors are used to determine the position of the spot and total forward dose. The slit signal is normalized to the dose and the resulting signal is analyzed to get the spot size. The position information is used to compensate for small changes due to spot motion and misalignment. The time resolution of the diagnostic is about 1 ns and measures spots from 0.5 mm to over 3 mm. The theory and equations used to calculate spot size and position are presented, as well as data. The calculations assume a symmetric, Gaussian spot. The spot data is generated by the ETA II accelerator, a 2kA, 5.5 MeV, 60ns electron beam focused on a Tantalum target. The spot generated is typically about 1 mm FWHM. Comparisons are made to an X-ray pinhole camera which images th...

  10. Improved simulation method of automotive spot weld failure with an account of the mechanical properties of spot welds

    Science.gov (United States)

    Wu, H.; Meng, X. M.; Fang, R.; Huang, Y. F.; Zhan, S.

    2017-12-01

    In this paper, the microstructure and mechanical properties of spot weld were studied, the hardness of nugget and heat affected zone (HAZ) were also tested by metallographic microscope and microhardness tester. The strength of the spot weld with the different parts' area has been characterized. According to the experiments result, CAE model of spot weld with HAZ structure was established, and simulation results of different lap-shear CAE models were analyzed. The results show that the spot weld model which contained the HAZ has good performance and more suitable for engineering application in spot weld simulation.

  11. Rehabilitation of river sediments contaminated by heavy metals from tanning industries using the phytoextraction technique

    Science.gov (United States)

    Beltrá Castillo, Juan Carlos; García Orenes, Fuensanta; Mora Navarro, José; Murcia Navarro, Francisco Jose; Zornoza Belmonte, Raúl; Faz Cano, Ángel; Gómez-Garrido, Melisa

    2017-04-01

    Leather tanning is an industrial sector of great tradition in Spain that has progressively evolved until it has reached a high degree of technification in the present. However, in its early days, the leather tanning industry has always been considered a dirty and polluting activity, mainly due to the water spills that ended up in the river channels. The Guadalentin Valley between Lorca and Murcia (SE Spain) is characterised by intensive crop and pig production, and an extensive agroalimentary and leather tannery industry. These anthropogenic sources have released salts and metals such as copper (Cu), zinc (Zn) and chromium (Cr) into Guadalentin river. Up to 2003, wastewater was discharged directly to the dry river, immediately upstream of the urban nucleus of Lorca, without any previous treatment. It contained high concentrations of inorganic salts and heavy metals (Cu, Zn and Cr). Spills, in some events, had a flow of 10 000 m3 d-1, with concentration of Cr over 500 mg L-1. Phytoremediation is a sustainable alternative that allows the environmental rehabilitation of fluvial dry sediments through the transfer of heavy metals from the contaminated soils to the native vegetation present. Atriplex halimus, salsola oppositifolia, suaeda vera and tamarix africana were the most representative autochthonous phytoextractor species that were planted to study the degree of decontamination of dry river sediments before planting and 12 months after planting. The sediments characterization was done by a sampling grid of 40 000 m2 (500 m x 8 m) where samples were taken at 3 depths (0-20 cm, 20-50 cm and 5-100 cm) every 50 m. A vegetation study was carried out by random plots of 10 m x 10 m. The results indicated that after 12 months the vegetation cover increased between 35% and 70%. The degree of contamination of Cu, Zn and Cr of the river dry sediments decreased slightly, being the atriplex halimus the plant specie that presented the highest value of the bioaccumulation factor

  12. Avrupa Komisyonu Belgelerinde Sosyal Güvenliğin Yeniden Tanımlanması

    Directory of Open Access Journals (Sweden)

    Varol DUR

    2011-12-01

    Full Text Available Avrupa Birliği sosyal güvenlik ve sosyal koruma alanlarında üyelerini doğrudan bağlayıcı düzenlemeler yapmaktan imtina etse de bu alanlarda genel prensipler ortaya koyan belgeler yayınlamaktadır. Bu belgelerin temel hedefi sosyal güvenliği de içeren sosyal koruma sistemlerinin modernleştirilmesi olarak tanımlanmaktadır. Birlik tarafından ortaya konan kurallar, ilkesel düzeyde kalsa da, iş gücü piyasalarının dönüşümünün sosyal güvenlik üzerindeki yansıması olarak ortaya çıkmaktadır. AB’de Sosyal güvenliğin modernleştirilmesi olgusunu, esnek güvence yaklaşımı çerçevesinde incelemek doğru olacaktır. Bu çerçevede, makalenin amacı AB’de esnek güvence ve sosyal koruma sistemlerindeki dönüşüm arasındaki paralel gelişimi değerlendirmektir.

  13. Could naphthenic acids be responsible for severe emulsion tightness for a low TAN value oil?

    Energy Technology Data Exchange (ETDEWEB)

    Pauchard, V.; Muller, H.; Al-Hajji, A. [Saudi Aramco, Dhahran (Saudi Arabia). Research and Development Center; Sjoblom, J. [Norwegian Univ. of Technology, Trondheim (Norway). Ugelstad Laboratory; Kokal, S. [Saudi Aramco, Dhahran (Saudi Arabia). EXPEC Advanced Research Center; Bouriat, P.; Dicharry, C. [Univ. de Pau, Pau Cedex (France). Laboratoire des Fluides Complexes, UMR CNRS; Rogers, R. [Florida State Univ., Tallahassee, FL (United States)

    2008-07-01

    This study re-analyzed the emulsion stabilizing properties of a low Total Acid Number (TAN) of a high asphaltene crude oil with respect to the role of naphthenic acids. The emulsion stability depended on the pressure/pH. The high interfacial activity of indigenous acids extracted from the crude oil was determined by means of Ion Exchange Resins and by the high organic acid content in the interfacial material extracted from a sludge emulsion. The physical origin of these phenomenological observations was identified using the Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR-MS) and pendant droplet experiments. The interfacial material was composed of a mixture of asphaltenes and organic acids having a wide range of structures (monoprotic, diprotic, fatty, naphthenic and perhaps aromatic) and molecular weights. The interfacial rheology was a 2D gel with an assumed glass transition temperature of approximately 40 degrees C. It was concluded that a synergistic effect of asphaltenes and organic acids promoted the build up of a very structured interface. This interface is more resistant to droplets coalescence than less structured interfaces. Therefore, the disruption of the interfacial layer requires the drainage of individual molecules as well as a collective yield of the gel.

  14. Complex mixture-associated hormesis and toxicity: the case of leather tanning industry.

    Science.gov (United States)

    Pagano, Giovanni; Castello, Giuseppe; Gallo, Marialuisa; Borriello, Ilaria; Guida, Marco

    2008-01-01

    A series of studies investigated the toxicities of tannery-derived complex mixtures, i.e. vegetable tannin (VT) from Acacia sp. or phenol-based synthetic tannin (ST), and waste-water from tannin-based vs. chromium-based tanneries. Toxicity was evaluated by multiple bioassays including developmental defects and loss of fertilization rate in sea urchin embryos and sperm (Paracentrotus lividus and Sphaerechinus granularis), and algal growth inhibition (Dunaliella tertiolecta and Selenastrum capricornutum). Both VT and ST water extracts resulted in hormetic effects at concentrations ranging 0.1 to 0.3%, and toxicity at levels > or =1%, both in sea urchin embryo and sperm, and in algal growth bioassays. When comparing tannin-based tannery wastewater (TTW) vs. chromium-based tannery effluent (CTE), a hormesis to toxicity trend was observed for TTW both in terms of developmental and fertilization toxicity in sea urchins, and in algal growth inhibition, with hormetic effects at 0.1 to 0.2% TTW, and toxicity at TTW levels > or =1%. Unlike TTW, CTE showed a monotonic toxicity increase from the lowest tested level (0.1%) and CTE toxicity at higher levels was significantly more severe than TTW-induced toxicity. The results support the view that leather production utilizing tannins might be regarded as a more environmentally friendly procedure than chromium-based tanning process.

  15. Decontamination of water polluted with oil through the use of tanned solid wastes

    Energy Technology Data Exchange (ETDEWEB)

    Gammoun, A.; Azzi, M. [Hassan II Univ., Casablanca (Morocco). Faculty of Science

    2007-09-15

    The ability of chrome shavings (CS) and buffing dusts of crust leather (BDCL) to remove oily wastes from demineralized water and natural seawater was investigated. The aim of the study was to discover environmentally friendly alternatives for the disposal of solid tannery wastes. The specific surface area of the CS and the BDCL were examined to determine ash content; chromium oxide; fat; and the pH of soluble matter. Scanning electron microscopy (SEM) was then used to examine the structure and morphology of the samples. Three types of oil were used in the experiment: diesel motor oil; premium motor oil; and used motor oil. Sorbent materials were added to a beaker containing 1000 ml of water and 5.5 g of oil. The amount of residual oil in the water was then extracted with petroleum ether. The amount of oil sorbed on the wastes was calculated by subtracting the amount of residual oil in water from the initial mass of oil added to the beakers. Results suggested that the tanned solid wastes efficiently removed the oil from the water. It was concluded that the waste materials were able to absorb many times their weight in oil. 21 refs., 4 tabs., 2 figs.

  16. Sun Exposure, Tanning Beds, and Herbs That Cure: An Examination of Skin Cancer on Pinterest.

    Science.gov (United States)

    Tang, Lu; Park, Sung-Eun

    2017-10-01

    Skin cancer is the most common cancer affecting the U.S. Pinterest.com, a virtual bookmarking social media site, has the potential to disseminate skin cancer-related information among young women, the group with the fastest increase in skin cancer diagnosis. This article presents a quantitative content analysis of pins about skin cancer on Pinterest guided by agenda-setting theory and the health belief model. Overall, sun exposure and tanning beds were most frequently discussed as the causes of skin cancer, and alternative therapies such as herbal medicine were discussed more than traditional biomedical treatment or prevention. Highly repinned pins tend to include more information than regular pins. Different types of skin cancer (melanoma, squamous-cell carcinoma, and basal-cell carcinoma) received the same amount of coverage; however, pins about nonmelanoma skin cancer (such as squamous-cell carcinoma and basal-cell carcinoma) were often information-poor. They were less likely to include information on the causes, prevention, and the biomedical treatment of skin cancer and were less likely to include health belief constructs associated with the promotion of skin cancer prevention and treatment.

  17. Laser spot detection based on reaction diffusion

    Czech Academy of Sciences Publication Activity Database

    Vázquez-Otero, Alejandro; Khikhlukha, Danila; Solano-Altamirano, J. M.; Dormido, R.; Duro, N.

    2016-01-01

    Roč. 16, č. 3 (2016), s. 1-11, č. článku 315. ISSN 1424-8220 R&D Projects: GA MŠk EF15_008/0000162 Grant - others:ELI Beamlines(XE) CZ.02.1.01/0.0/0.0/15_008/0000162 Institutional support: RVO:68378271 Keywords : laser spot detection * laser beam detection * reaction diffusion models * Fitzhugh-Nagumo model * reaction diffusion computation * Turing patterns Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 2.677, year: 2016

  18. On cold spots in tumor subvolumes

    International Nuclear Information System (INIS)

    Tome, Wolfgang A.; Fowler, Jack F.

    2002-01-01

    Losses in tumor control are estimated for cold spots of various 'sizes' and degrees of 'cold dose'. This question is important in the context of intensity modulated radiotherapy where differential dose-volume histograms (DVHs) for targets that abut a critical structure often exhibit a cold dose tail. This can be detrimental to tumor control probability (TCP) for fractions of cold volumes even as small as 1%, if the cold dose is lower than the prescribed dose by substantially more than 10%. The Niemierko-Goitein linear-quadratic algorithm with γ 50 slope 1-3 was used to study the effect of cold spots of various degrees (dose deficit below the prescription dose) and size (fractional volume of the cold dose). A two-bin model DVH has been constructed in which the cold dose bin is allowed to vary from a dose deficit of 1%-50% below prescription dose and to have volumes varying from 1% to 90%. In order to study and quantify the effect of a small volume of cold dose on TCP and effective uniform dose (EUD), a four-bin DVH model has been constructed in which the lowest dose bin, which has a fractional volume of 1%, is allowed to vary from 10% to 45% dose deficit below prescription dose. The highest dose bin represents a simultaneous boost. For fixed size of the cold spot the calculated values of TCP decreased rapidly with increasing degrees of cold dose for any size of the cold spot, even as small as 1% fractional volume. For the four-subvolume model, in which the highest dose bin has a fractional volume of 80% and is set at a boost dose of 10% above prescription dose, it is found that the loss in TCP and EUD is moderate as long as the cold 1% subvolume has a deficit less than approximately 20%. However, as the dose deficit in the 1% subvolume bin increases further it drives TCP and EUD rapidly down and can lead to a serious loss in TCP and EUD. Since a dose deficit to a 1% volume of the target that is larger than 20% of the prescription dose may lead to serious loss of

  19. The fractal nature of vacuum arc cathode spots

    International Nuclear Information System (INIS)

    Anders, Andre

    2005-01-01

    Cathode spot phenomena show many features of fractals, for example self-similar patterns in the emitted light and arc erosion traces. Although there have been hints on the fractal nature of cathode spots in the literature, the fractal approach to spot interpretation is underutilized. In this work, a brief review of spot properties is given, touching the differences between spot type 1 (on cathodes surfaces with dielectric layers) and spot type 2 (on metallic, clean surfaces) as well as the known spot fragment or cell structure. The basic properties of self-similarity, power laws, random colored noise, and fractals are introduced. Several points of evidence for the fractal nature of spots are provided. Specifically power laws are identified as signature of fractal properties, such as spectral power of noisy arc parameters (ion current, arc voltage, etc) obtained by fast Fourier transform. It is shown that fractal properties can be observed down to the cutoff by measurement resolution or occurrence of elementary steps in physical processes. Random walk models of cathode spot motion are well established: they go asymptotically to Brownian motion for infinitesimal step width. The power spectrum of the arc voltage noise falls as 1/f 2 , where f is frequency, supporting a fractal spot model associated with Brownian motion

  20. Advanced spot quality analysis in two-colour microarray experiments

    Directory of Open Access Journals (Sweden)

    Vetter Guillaume

    2008-09-01

    Full Text Available Abstract Background Image analysis of microarrays and, in particular, spot quantification and spot quality control, is one of the most important steps in statistical analysis of microarray data. Recent methods of spot quality control are still in early age of development, often leading to underestimation of true positive microarray features and, consequently, to loss of important biological information. Therefore, improving and standardizing the statistical approaches of spot quality control are essential to facilitate the overall analysis of microarray data and subsequent extraction of biological information. Findings We evaluated the performance of two image analysis packages MAIA and GenePix (GP using two complementary experimental approaches with a focus on the statistical analysis of spot quality factors. First, we developed control microarrays with a priori known fluorescence ratios to verify the accuracy and precision of the ratio estimation of signal intensities. Next, we developed advanced semi-automatic protocols of spot quality evaluation in MAIA and GP and compared their performance with available facilities of spot quantitative filtering in GP. We evaluated these algorithms for standardised spot quality analysis in a whole-genome microarray experiment assessing well-characterised transcriptional modifications induced by the transcription regulator SNAI1. Using a set of RT-PCR or qRT-PCR validated microarray data, we found that the semi-automatic protocol of spot quality control we developed with MAIA allowed recovering approximately 13% more spots and 38% more differentially expressed genes (at FDR = 5% than GP with default spot filtering conditions. Conclusion Careful control of spot quality characteristics with advanced spot quality evaluation can significantly increase the amount of confident and accurate data resulting in more meaningful biological conclusions.

  1. Evaluation of Failure Strength of Woven CFRP Composite Plate Subject to Axial Load by Tan-Cheng Failure Criterion

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Young; Park, Hong Sun; Kang, Min Sung; Lee, Woo Hyung; Choi, Jung Hun; Koo, Jae Mean; Seok, Chang Sung [Sungkyunkwan University, Suwon (Korea, Republic of)

    2009-04-15

    In the manufacture of CFRP(Carbon Fiber Reinforced Polymer Composite) composite structures, various independent components join by bolts and pins. Holes for bolts and pins have an effect on the failure strength of such structures, because those act as notches in structures. The failure characteristic of such structures are different from those of plain plate subject to remote load. In this paper, tensile properties of woven CFRP composite plates with laminates of 0 .deg., 30 .deg. and 45 .deg. were obtained according to ASTM D 3039. By using obtained tensile failure strength and Tan-Cheng failure criterion, tensile failure strength of CFRP laminate with arbitrary fiber angle were evaluated. Also, the degradation of tensile properties by center hole({Phi}10mm) with a remote load was evaluated and the failure strengths were applied to Tan's failure criterion, similarly.

  2. Evaluation of Failure Strength of Woven CFRP Composite Plate Subject to Axial Load by Tan-Cheng Failure Criterion

    International Nuclear Information System (INIS)

    Kim, Sang Young; Park, Hong Sun; Kang, Min Sung; Lee, Woo Hyung; Choi, Jung Hun; Koo, Jae Mean; Seok, Chang Sung

    2009-01-01

    In the manufacture of CFRP(Carbon Fiber Reinforced Polymer Composite) composite structures, various independent components join by bolts and pins. Holes for bolts and pins have an effect on the failure strength of such structures, because those act as notches in structures. The failure characteristic of such structures are different from those of plain plate subject to remote load. In this paper, tensile properties of woven CFRP composite plates with laminates of 0 .deg., 30 .deg. and 45 .deg. were obtained according to ASTM D 3039. By using obtained tensile failure strength and Tan-Cheng failure criterion, tensile failure strength of CFRP laminate with arbitrary fiber angle were evaluated. Also, the degradation of tensile properties by center hole(Φ10mm) with a remote load was evaluated and the failure strengths were applied to Tan's failure criterion, similarly

  3. Soybean plant growth study conducted using purified protein hydrolysate-based fertilizer made from chrome-tanned leather waste.

    Science.gov (United States)

    Pati, Anupama; Chaudhary, Rubina

    2015-12-01

    Leather processing discharges enormous amount of chrome containing leather solid waste which creates a major disposal problem. Chrome-tanned leather solid waste is a complex of collagen and chromium. The presence of chromium limits protein application in fertilizer industry. The purified protein hydrolysate with zero chromium could be used as a nitrogen source for fertilizer formulation. In this study, an attempt has been made to employ purified protein hydrolysate derived from chrome-tanned leather shavings (CTLS) in formulation of fertilizer. The formulated fertilizer (1–3 t ha(-1)) is employed as nitrogen source in production of soybean. Plant growth study demonstrates that formulated fertilizer dosage 3 t ha(-1) produced similar effects of commercial fertilizer-treated plants. Application of formulated fertilizer yielded higher seed in plant than commercial fertilizer.

  4. APLIKASI KORELASI PEARSON DALAM MEMBANGUN MODEL TREE-AUGMENTED NETWORK (TAN (Studi Kasus Pengenalan Karakter Tulisan Tangan

    Directory of Open Access Journals (Sweden)

    Irwan Budi Santoso

    2013-10-01

    Full Text Available Langkah pertama dalam membangun model pengenalan Tree-Augmented Network (TAN  dengan  mengukur  besarnya  hubungan  diantara  pasangan  fitur  objek.  Salah  satu metode yang dapat digunakan mengukur besarnya keeratan hubungan secara linier diantara pasangan fitur adalah   Korelasi Pearson. Aplikasi Korelasi Pearson  dalam membangun model Tree-Augmented Network (TAN dalam penelitian ini, akan diujicobakan pada kasus membangun  model pengenalan karakter tulisan tangan. Data fitur karakter tulisan tangan untuk kasus ini, diasumsikan mengikuti distribusi gaussian karena estimasi parameter model pengenalannya menggunakan estimator Maximum Likelihood (ML. Hasil eksperimen dengan menggunakan data training yang terdiri dari 5 jenis karakter tulisan tangan, menunjukkan untuk dimensi fitur karakter tulisan tangan 10x30 (30 fitur, akurasi sistem Korelasi Pearson dalam membangun model TAN untuk mengenali karakter tulisan tangan  sebesar 88 %.

  5. Performance of an app measuring spot quality in dried blood spot sampling

    NARCIS (Netherlands)

    Veenhof, Herman

    2016-01-01

    Introduction: The Dried Blood Spot sampling (DBS) method gives patients and health care workers the opportunity for remote sampling using a drop of blood from a fingerprick on a sampling card which can be send to the laboratory by mail. Laboratory analysts frequently reject DBS samples because of

  6. Cold Spots in Neonatal Incubators Are Hot Spots for Microbial Contamination▿

    Science.gov (United States)

    de Goffau, Marcus C.; Bergman, Klasien A.; de Vries, Hendrik J.; Meessen, Nico E. L.; Degener, John E.; van Dijl, Jan Maarten; Harmsen, Hermie J. M.

    2011-01-01

    Thermal stability is essential for the survival and well-being of preterm neonates. This is achieved in neonatal incubators by raising the ambient temperature and humidity to sufficiently high levels. However, potentially pathogenic microorganisms also can thrive in such warm and humid environments. We therefore investigated whether the level of microbial contamination (i.e., the bacterial load) inside neonatal incubators can be predicted on the basis of their average temperature and relative humidity settings, paying special attention to local temperature differences. Swab samples were taken from the warmest and coldest spots found within Caleo incubators, and these were plated to determine the number of microbial CFU per location. In incubators with high average temperature (≥34°C) and relative humidity (≥60%) values, the level of microbial contamination was significantly higher at cold spots than at hot spots. This relates to the fact that the local equilibrium relative humidity at cold spots is sufficiently high to sustain microbial growth. The abundance of staphylococci, which are the main causative agents of late-onset sepsis in preterm neonates, was found to be elevated significantly in cold areas. These findings can be used to improve basic incubator hygiene. PMID:22003021

  7. Cold spots in neonatal incubators are hot spots for microbial contamination.

    Science.gov (United States)

    de Goffau, Marcus C; Bergman, Klasien A; de Vries, Hendrik J; Meessen, Nico E L; Degener, John E; van Dijl, Jan Maarten; Harmsen, Hermie J M

    2011-12-01

    Thermal stability is essential for the survival and well-being of preterm neonates. This is achieved in neonatal incubators by raising the ambient temperature and humidity to sufficiently high levels. However, potentially pathogenic microorganisms also can thrive in such warm and humid environments. We therefore investigated whether the level of microbial contamination (i.e., the bacterial load) inside neonatal incubators can be predicted on the basis of their average temperature and relative humidity settings, paying special attention to local temperature differences. Swab samples were taken from the warmest and coldest spots found within Caleo incubators, and these were plated to determine the number of microbial CFU per location. In incubators with high average temperature (≥ 34°C) and relative humidity (≥ 60%) values, the level of microbial contamination was significantly higher at cold spots than at hot spots. This relates to the fact that the local equilibrium relative humidity at cold spots is sufficiently high to sustain microbial growth. The abundance of staphylococci, which are the main causative agents of late-onset sepsis in preterm neonates, was found to be elevated significantly in cold areas. These findings can be used to improve basic incubator hygiene.

  8. L'adénome métanéphrique bilatéral du rein

    African Journals Online (AJOL)

    ra

    L'adénome métanéphrique du rein est une tumeur épithéliale bénigne rare. Son diagnostic est exclusivement histologique. Le diagnostic différentiel se fait essentiellement avec le néphroblastome et le carcinome papillaire à cellules rénales. L'étude cytogénétique apporte des éléments importants pour différencier entre ...

  9. Water body detection from TanDEM-X data: concept and first evaluation of an accurate water indication mask

    OpenAIRE

    Wendleder, Anna; Breunig, Markus; Klaus, Martin; Wessel, Birgit; Roth, Achim

    2011-01-01

    Additionally to the global DEM which is the main product of the TanDEM-X mission a global water body mask will be produced. The main goal of this water mask is to deliver an information layer for any subsequent DEM editing process. It is derived from the SAR amplitude and coherence. In this paper, the concept of the global water body detection is explained and a first evaluation of the single coverage water body detection is presented.

  10. МssМ charged Higgs production in the 1 TeV domain and large tan ...

    Indian Academy of Sciences (India)

    effective sudakov expansion (eq. (2)), and to determine the relevant features of the next-to-subleading term Arem(q2). With this aim, we shall study the dependence of Arem(q2) on the c.m. energy for given values of the parameters of the chosen. MssM model. We retained the following five (standard) free parameters: tanβ, μ ...

  11. Preparation, characterization and application of dispersible and spherical Nano-SiO2@Copolymer nanocomposite in leather tanning

    Science.gov (United States)

    Pan, Hui; Li, Guang-Long; Liu, Rui-Qi; Wang, Su-Xia; Wang, Xiao-Dong

    2017-12-01

    Dispersible and spherical silica nanoparticles (nano-SiO2) were prepared with tetraethyl silicate and different surface-modifiers via a simple method. The silica nanoparticles surface-modified with methacryloxy (propyl) trimethoxysilane (denoted as MPS-SiO2), dimethyl diallyl ammoniumchloride (denoted as DMDAAC-SiO2) and poly (methacrylic acid) (denoted as PMAA-SiO2) which are known as hydrophobic, amphiphilic and hydrophilic modifiers, respectively, exhibited excellent dispersibility in various solvents or polymer matrix. The obtained bare silica nanoparticles, MPS-SiO2, DMDAAC-SiO2 and PMAA-SiO2 were characterized by Fourier transform infrared spectra (FTIR), thermogravimetric analysis (TGA), transmission electron microscope (TEM) and scanning electron microscope (SEM). A series of nanocomposites (denoted as SiO2/P, MPS-SiO2/P, DMDAAC-SiO2/P and PMAA-SiO2/P, respectively) were also prepared with the bare or surface-modified silica nanoparticles and methacrylic acid-co-acrylamide-co-acrylonitrile-co-salicylic acid tetrabasic copolymer (denoted as PMAAS) and applied in leather tanning. Compared with those of the leather tanned with the commercial acrylic resin (CHINATAN OM) and pure tetrabasic copolymer tanning agents, the physical and mechanical properties, rheological properties and thermal stabilities of the leather treated with SiO2/P, MPS-SiO2/P, DMDAAC-SiO2/P or PMAA-SiO2/P founded to be improved in a significant way. Moreover, the highest shrinkage temperature of the wet-white sheepskin tanned with PMAA-SiO2/P reached to 76 °C and the thickness increase reached to 105%.

  12. Evidence for the spotting hypothesis in gymnasts.

    Science.gov (United States)

    Heinen, Thomas

    2011-04-01

    The goal of this study was to investigate the visual spotting hypothesis in 10 experts and 10 apprentices as they perform back aerial somersaults from a standing position with no preparatory jumps (short flight duration condition) and after some preparatory jumps with a flight time of 1s (long flight duration condition). Differences in gaze behavior and kinematics were expected between experts and apprentices and between experimental conditions. Gaze behavior was measured using a portable and wireless eye-tracking system in combination with a movement-analysis system. Experts exhibited a smaller landing deviation from the middle of the trampoline bed than apprentices. Experts showed higher fixation ratios during the take-off and flight phase. Experts exhibited no blinks in any of the somersaults in both conditions, whereas apprentices showed significant blink ratios in both experimental conditions. The findings suggest that gymnasts can use visual spotting during the back aerial somersault, even when the time of flight is delimited. We conclude that knowledge about gaze-movement relationships may help coaches develop specific training programs in the learning process of the back aerial somersault.

  13. Hot spot exercise: 1975 (HSX-75)

    International Nuclear Information System (INIS)

    Trolan, R.T.; Wilson, R.L.; Jessen, F.W.

    1976-01-01

    A special unannounced exercise, called HOT SPOT Exercise--1975 (HSX-75), was prepared to test the general capability of the LLL ALERT Program to activate and deploy the LLL and Sandia Laboratory, Livermore (SLL) component of the ERDA/ARG. The exercise activities were limited to the LLL facilities in Livermore and the Site 300 explosive test facility located approximately 15 miles southeast of Livermore. The exercise simulated an accident at a U.S. Army storage facility (Site 300). The simulated accident involved two LLL designed weapons (W-70). One weapon was dropped during unloading operations and ignited the gas tank of the weapon transporter. The subsequent fire caused a low-order detonation of the high explosive component. The fire caused dispersal of fissile material downwind from the site. A second weapon was damaged in the explosion by fragments from the first weapon. The extent of damage to the second weapon was initially unknown. The exercise was conducted on September 23, 1975. A complete description of the specific nature of the simulated accident is contained in the scenario. Umpires were assigned to evaluate and subsequently report on the effectiveness of the response. All test objectives were accomplished. The following appendices are included: operational safety procedures, photographs and site map, HOT SPOT equipment, atmospheric release advisory capability, personnel list, chronology of events, and critique comments

  14. Senzorové uzly Java Sun SPOT

    OpenAIRE

    Malina, Karel

    2010-01-01

    Tato bakalářská práce se zabývá využitím senzorových uzlů Java Sun Spot pro vícebodové bezdrátové sledování teploty a její regulace pomocí těchto uzlů. V teoretické části je uveden popis, složení a ovládání senzorových uzlů Java Sun Spot. V praktické části jsou uvedeny naprogramované aplikace, ve vývojovém prostředí NetBeans, pro bezdrátové sledování teploty, kapacity baterie a jejich zobrazení na hostitelském počítači ve formě grafu. Ve druhé části praktické části je popsán způsob regulace t...

  15. Resistance to leaf spot disease in peanut

    International Nuclear Information System (INIS)

    Soriano, J.D.

    1988-01-01

    Full text: Leaf spot disease causes defoliation of peanut plants during pod development thereby reducing yield. To induce mutations for resistance to the disease, dormant seeds of peanut were irradiated with 10-40 kR gamma rays with pre- and post-irradiation treatments to minimize radiation damage. Spores of the causal fungi, Cercospora arachidicola Hori and Cercosporidium personatum (B and C) Deigh., were cultured under asceptic conditions in PDA medium with 2-3 drops of 10% table salt solution to enhance development of spores. The first two leaves of M 2 seedlings were hand-inoculated two or three times in the field at one week intervals. Out of a total of 2,453 M 2 seedlings inoculated thrice, 9 plants showed complete resistance based on degree of infection. However, after recurrent selection, only 3 M 5 lines gave complete resistance, the rest exhibiting only intermediate resistance. The disease resistant lines yielded almost twice as much as several commercial varieties due to extensive leaf defoliation in the latter. One of the mutant lines is being crossed with some popular susceptible varieties. Inheritance studies showed that leaf spot resistance is governed by two recessive mutant genes acting complementary. The F 2 ratio was close to 15:1. The mutant lines are presently evaluated through the Bureau of Plant Industry before seeds are distributed to peanut growers. (author)

  16. A new index for electricity spot markets

    International Nuclear Information System (INIS)

    Falbo, Paolo; Fattore, Marco; Stefani, Silvana

    2010-01-01

    Different indexes are used in electricity markets worldwide to represent the daily behavior of spot prices. However, the peculiarities of these markets require a careful choice of the index, based on mathematical formulation and its statistical properties. Choosing a bad index may influence the financial policies of market players, since derivative pricing and hedging performance can be deeply affected. In this paper with an initial theoretical analysis, we intend to show that the most widely used indexes (simple arithmetic average and weighted average with current volumes) are poor representatives of the spot market. We will then perform an analysis of the hedging strategy on a derivative instrument (an Asian option) written on a reference index. The resulting simulations, applied to OMEL (Spain) and EEX (Germany), are sufficiently clear cut to suggest that the decision to adopt an index to represent properly a market must be taken very carefully. Finally we will propose a new index (FAST index) and, after comparing it with the previous indexes, will show that both theoretically and practically this index can be taken as a good electricity market synthetic indicator. (author)

  17. Medical students’ attitudes and perspectives regarding novel computer-based practical spot tests compared to traditional practical spot tests

    Science.gov (United States)

    Wijerathne, Buddhika; Rathnayake, Geetha

    2013-01-01

    Background Most universities currently practice traditional practical spot tests to evaluate students. However, traditional methods have several disadvantages. Computer-based examination techniques are becoming more popular among medical educators worldwide. Therefore incorporating the computer interface in practical spot testing is a novel concept that may minimize the shortcomings of traditional methods. Assessing students’ attitudes and perspectives is vital in understanding how students perceive the novel method. Methods One hundred and sixty medical students were randomly allocated to either a computer-based spot test (n=80) or a traditional spot test (n=80). The students rated their attitudes and perspectives regarding the spot test method soon after the test. The results were described comparatively. Results Students had higher positive attitudes towards the computer-based practical spot test compared to the traditional spot test. Their recommendations to introduce the novel practical spot test method for future exams and to other universities were statistically significantly higher. Conclusions The computer-based practical spot test is viewed as more acceptable to students than the traditional spot test. PMID:26451213

  18. Hot spot formation on different tokamak wall materials

    International Nuclear Information System (INIS)

    Nedospasov, A.V.; Bezlyudny, I.V.

    1998-01-01

    The thermal contraction phenomenon and generation of 'hot spots' due to thermoemission were described. The paper consider non-linear stages of heat contraction on the graphite, beryllium, tungsten and vanadium wall. It is shown that on the beryllium surface hot spot can't appear due to strong cooling by sublimation. For other materials the conditions of hot spot appearance due to local superheating of the wall have been calculated and their parameters were found: critical surface temperature, size of spots and their temperature profiles, heat fluxes from plasma to the spots. It have been calculated fluxes of sublimating materials from spots to the plasma. It is noticed that nominal temperature of the grafite divertor plate, accepted in ITER's project to being equal 1500 C, is lower then critical temperature of the development heat contraction due to thermoemission. (orig.)

  19. Combining geometric matching with SVM to improve symbol spotting

    Science.gov (United States)

    Nayef, Nibal; Breuel, Thomas M.

    2013-01-01

    Symbol spotting is important for automatic interpretation of technical line drawings. Current spotting methods are not reliable enough for such tasks due to low precision rates. In this paper, we combine a geometric matching-based spotting method with an SVM classifier to improve the precision of the spotting. In symbol spotting, a query symbol is to be located within a line drawing. Candidate matches can be found, however, the found matches may be true or false. To distinguish a false match, an SVM classifier is used. The classifier is trained on true and false matches of a query symbol. The matches are represented as vectors that indicate the qualities of how well the query features are matched, those qualities are obtained via geometric matching. Using the classification, the precision of the spotting improved from an average of 76.6% to an average of 97.2% on a database of technical line drawings.

  20. Spot: A Programming Language for Verified Flight Software

    Science.gov (United States)

    Bocchino, Robert L., Jr.; Gamble, Edward; Gostelow, Kim P.; Some, Raphael R.

    2014-01-01

    The C programming language is widely used for programming space flight software and other safety-critical real time systems. C, however, is far from ideal for this purpose: as is well known, it is both low-level and unsafe. This paper describes Spot, a language derived from C for programming space flight systems. Spot aims to maintain compatibility with existing C code while improving the language and supporting verification with the SPIN model checker. The major features of Spot include actor-based concurrency, distributed state with message passing and transactional updates, and annotations for testing and verification. Spot also supports domain-specific annotations for managing spacecraft state, e.g., communicating telemetry information to the ground. We describe the motivation and design rationale for Spot, give an overview of the design, provide examples of Spot's capabilities, and discuss the current status of the implementation.

  1. Effect of Restricted Grazing Time on the Foraging Behavior and Movement of Tan Sheep Grazed on Desert Steppe

    Directory of Open Access Journals (Sweden)

    Yong Chen

    2013-05-01

    Full Text Available To investigate the effect of restricted grazing time on behavior of Tan sheep on desert steppe, forty 4-months old male Tan sheep with an original body weight (BW of 15.62±0.33 kg were randomly allocated to 4 grazing groups which corresponded to 4 different restricted grazing time treatments of 2 h/d (G2, 4 h/d (G4, 8 h/d (G8 and 12 h/d (G12 access to pasture. The restricted grazing times had a significant impact on intake time, resting time, ruminating time, bite rate and movement. As the grazing time decreased, the proportion of time spent on intake, bite rate and grazing velocity significantly (p<0.05 increased, but resting and ruminating time clearly (p<0.05 decreased. The grazing months mainly depicted effect on intake time and grazing velocity. In conclusion, by varying their foraging behavior, Tan sheep could improve grazing efficiency to adapt well to the time-limited grazing circumstance.

  2. Vacations to sunny destinations, sunburn, and intention to tan: a cross-sectional study in Denmark, 2007-2009.

    Science.gov (United States)

    Køster, Brian; Thorgaard, Camilla; Philip, Anja; Clemmensen, Inge Haunstrup

    2011-02-01

    Denmark has experienced an increase in melanoma incidence since the 1960s. Exposure to ultraviolet radiation is the main preventable cause of this cancer. We examined current travel to, and sun-related behaviour of Danes at, sunny destinations in relation to their risk for sunburn. A population-based sample of 11,158 respondents aged 15-59 years completed three questionnaires in 2007-2009 that included items on exposure to ultraviolet radiation. Using logistic regression analysis we examined the relations between sunny vacations, sun-related behaviour, demographic factors and risk for sunburn. During 2007-2009, 44.8-45.8% of the respondents travelled to a sunny destination at least once a year; 24% became sunburnt, and 69% tanned intentionally. The odds ratio for sunburn in general for people who went on a sunny vacation as compared with those who did not was 1.6 (1.5-1.7). Sunscreen use (1.9; 1.4-2.6) and intentional tanning (3.4; 2.8-4.1) were positively associated with sunburn on vacation. Taking a vacation in a sunny place is a risk factor for sunburn, especially for young people. The recommendation for sunscreen use should be re-evaluated, as intention to tan is the most important factor in sunburn on vacation and should be targeted more strategically.

  3. UV-generated free radicals (FR) in skin: Their prevention by sunscreens and their induction by self-tanning agents

    Science.gov (United States)

    Jung, K.; Seifert, M.; Herrling, Th.; Fuchs, J.

    2008-05-01

    In the past few years, the cellular effects of ultraviolet (UV) irradiation induced in skin have become increasingly recognized. Indeed, it is now well known that UV irradiation induces structural and cellular changes in all the compartments of skin tissue. The generation of reactive oxygen species (ROS) is the first and immediate consequence of UV exposure and therefore the quantitative determination of free radical reactions in the skin during UV radiation is of primary importance for the understanding of dermatological photodamage. The RSF method (radical sun protection factor) herein presented, based on electron spin resonance spectroscopy (ESR), enables the measurement of free radical reactions in skin biopsies directly during UV radiation. The amount of free radicals varies with UV doses and can be standardized by varying UV irradiance or exposure time. The RSF method allows the determination of the protective effect of UV filters and sunscreens as well as the radical induction capacity of self-tanning agents as dihydroxyacetone (DHA). The reaction of the reducing sugars used in self-tanning products and amino acids in the skin layer (Maillard reaction) leads to the formation of Amadori products that generate free radicals during UV irradiation. Using the RSF method three different self-tanning agents were analyzed and it was found, that in DHA-treated skin more than 180% additional radicals were generated during sun exposure with respect to untreated skin. For this reason the exposure duration in the sun must be shortened when self-tanners are used and photoaging processes are accelerated.

  4. A profitable use of by-products of the poultry slaughter. The tanning of hen’s feet skins

    Directory of Open Access Journals (Sweden)

    Juan Iade Vergara

    2013-01-01

    Full Text Available The aim of this development is to add value to one of the by-products of the poultry slaughtery, the chicken’s feet. The process began with the skinning of the chicken’s feet, which underwent a tanning process to obtain a leather characterised for its similarity with exotic leathers such as the reptile ones. To facilitate its possible production by artisanal means we designed a more environmental-friendly process, eliminating the use of sodium sulfide in the stages corresponding to dehairing and liming, followed by a chromium-free tanning based on a combination of vegetable tannins and synthetic retanning agents. Confirmation of the tanning of the skins was performed by measuring the shrinkage temperature of leathers, obtaining a value of 80 °C, higher than those of the raw hides. Physical properties were evaluated to characterize the product, obtaining tensile strength values of 0,65 kg/mm2 and a tear resistance of 2,10 kg/mm.

  5. Bier’s spots with onset in childhood*

    Science.gov (United States)

    Portocarrero, Larissa Karine Leite; Saraiva, Maria Isabel Ramos; Barbosa, Marcella Amaral Horta; Veronez, Isis Suga; Swiczar, Bethania Cabral Cavalli; Valente, Neusa Yuriko Sakai

    2016-01-01

    Bier spots are small, irregular, hypopigmented macules that are usually found on the arms and legs. The macules disappear when the limb is raised. Bier spots have been reported in association with a number of conditions but there is no consistent association to specific desease. Although they usually affect young adults, we report a case of Bier spots that began in childhood. As an asymptomatic and possibly transitional condition, the disease does not require treatment. PMID:28300906

  6. Dynamic characterization of the CT angiographic 'spot sign'.

    Directory of Open Access Journals (Sweden)

    Santanu Chakraborty

    Full Text Available BACKGROUND AND PURPOSE: Standard (static CT angiography is used to identify the intracerebral hemorrhage (ICH spot sign. We used dynamic CT-angiography to describe spot sign characteristics and measurement parameters over 60-seconds of image acquisition. METHODS: We prospectively identified consecutive patients presenting with acute ICH within 4.5 hours of symptom onset, and collected whole brain dynamic CT-angiography (dCTA. Spot parameters (earliest appearance, duration, maximum Hounsfield unit (HU, time to maximum HU, time to spot diagnostic definition, spot volume and hematoma volumes were measured using volumetric analysis software. RESULT: We enrolled 34 patients: three were excluded due to secondary causes of ICH. Of the remaining 31 patients there were 18 females (58% with median age 70 (range 47-86 and baseline hematoma volume 33 ml (range 0.7-103 ml. Positive dCTA spot sign was present in 13 patients (42% visualized as an expanding 3-dimensional structure temporally evolving its morphology over the scan period. Median time to spot appearance was 21 s (range 15-35 seconds. This method allowed tracking of spots evolution until the end of venous phase (active extravasation with median duration of 39 s (range 25-45 seconds. The average density and time to maximum density was 204HU and 30.8 s (range 23-31 s respectively. Median time to spot diagnosis was 20.8 s using either 100 or 120HU definitions. CONCLUSION: Dynamic CTA allows a 3-dimensional assessment of spot sign formation during acute ICH, and captured higher spot sign prevalence than previously reported. This is the first study to describe and quantify spot sign characteristics using dCTA; these can be used in ongoing and upcoming ICH studies.

  7. Insights from ecological niche modeling on the taxonomic distinction and niche differentiation between the black-spotted and red-spotted tokay geckoes (Gekko gecko)

    OpenAIRE

    Zhang, Yueyun; Chen, Chongtao; Li, Li; Zhao, Chengjian; Chen, Weicai; Huang, Yong

    2014-01-01

    The black-spotted tokay and the red-spotted tokay are morphologically distinct and have largely allopatric distributions. The black-spotted tokay is characterized by a small body size and dark skin with sundry spots, while the red-spotted tokay has a relatively large body size and red spots. Based on morphological, karyotypic, genetic, and distribution differences, recent studies suggested their species status; however, their classifications remain controversial, and additional data such as e...

  8. Experimental Evidence for Linear Metal-Azide Bonds. The Binary Group 5 Azides Nb(N3)5, Ta(N3)5, [Nb(N3)6]- and [Ta(N3)6]-, and 1:1 Adducts of Nb(N3)5 and Ta(N3)5 with CH3CN (PREPRINT)

    Science.gov (United States)

    2006-03-20

    than the equatorial ones, as expected from VSEPR arguments.[29] In contrast, the axial M-N-N bonds in Nb(N3)5 and Ta(N3)5 are calculated to be almost...Angew. Chem. Int. Ed. 2000, 39, 2108. [29] (a) R. J. Gillespie, I. Hargittai, The VSEPR Model of Molecular Geometry, Allyn and Bacon, A Division of

  9. Mitigation of naphthenate related production upsets in high TAN (Total Acid Number) crude oil

    Energy Technology Data Exchange (ETDEWEB)

    Ostojic, Nik [Maersk Oil, Copenhagen (Denmark); Vijn, Pieter; Reiners, Robert [Champion Technologies Europe BV, Delden (Netherlands)

    2012-07-01

    This paper describes a strategy for prediction, evaluation and mitigation of calcium naphthenate related production problems. Developing fields with acidic crude in the North Sea, West Africa, Bohai Bay (China) and Brazil is becoming more common in recent years. The high acid crude contains a considerable amount of naphthenic acids, typically having a Total Acid Number (TAN) higher than 0.5 mg KOH/g. Formation of either hard type 'calcium naphthenate precipitates' or soft type 'sodium carboxylate/emulsions' during crude oil production can lead to severe flow assurance and separation problems. In severe cases this may lead to production shutdowns to clean-up the equipment. A number of different naphthenate mitigation approaches have been published but no one particular approach is considered to be the most efficient as it depends significantly on the particular field conditions. Initially, this problem was addressed by deploying large volumes of (usually organic) acid, but more recently high efficiency low dose naphthenate inhibitors have been introduced. For predicting naphthenate scaling potential, methods were developed to determine the concentration of 1230 Dalton naphthenic tetra acid (ARN acids) in either deposit or crude oil and this information can be used to locate and potentially isolate the problem to a certain reservoir. Also, methods were developed to design suitable low dose naphthenate inhibitors. As these inhibitors are field tested, monitoring is required to ensure the product is performing most efficiently. In cases of tight emulsions however, this is less difficult as the oil dehydration and water quality is affected instantly. Methods were developed to allow monitoring of the calcium naphthenate deposition in field trails, thus allow trending and evaluation of the chemicals performance. After detailed analyses and discussions of the developed methods, a North Sea case history is presented reviewing several years of treating

  10. Alternative Epistemologies in Budjette Tan and Kajo Baldisimo’s TRESE

    Directory of Open Access Journals (Sweden)

    Ana Micaela Chua

    2016-12-01

    Full Text Available Postmodern readings are premised on the dissolution of grand narratives, disallowing the imagination of unity or truth, and giving primacy to decentering as novelty. Working against such a tendency, this essay presents a reading of Budjette Tan and Kajo Baldisimo’s TRESE as a text grounded in particular social epistemologies, which allows the text to speak of Metro Manila as a unified entity where people share realities and myths. TRESE, I argue here, locates the impulse for resolution in alternative systems of knowledge— often between superstition and grand narrative—that are easily available, but often too quickly dismissed as useless or outmoded. In stories such as “Wanted: Bedspacer” and “Cadena de Amor,” different ways of accessing knowledge are allowed to play vital roles in detection without totally devaluing rational analyses. These alternatives to logic and science may themselves vary: from superstitions to the properly arcane, from “common sense” to emotional and sociological understanding of human interaction. The text engages in myth-making in an effort to approximate cultural unity, where such unity has always been problematic, by imagining alternative access points to truth; this is a move that must be read in the context of a culture that is not irrational or anti-rational, but one in which rationality is only one way of accessing knowledge. TRESE empowers alternative systems of knowledge that allow us to better comprehend ourselves as a society. In this essay I employ critical insights from Kumkum Sangari’s “The Politics of the Possible,” through which TRESE can be read as a text that is not simply a novelty, but as one in which popular tropes and strategies of myth-making come together to present the possibility of a vision of a Philippine urban culture that embraces both the fantastic and the real, rather than being divided between them.

  11. Comparison of the reconstruction trochanteric antigrade nail (TAN) with the proximal femoral nail antirotation (PFNA) in the management of reverse oblique intertrochanteric hip fractures.

    Science.gov (United States)

    Makki, Daoud; Matar, Hosam E; Jacob, Nebu; Lipscombe, Stephen; Gudena, Ravindra

    2015-12-01

    Reverse oblique intertrochanteric fractures have unique mechanical characteristics and are often treated with intramedullary implants. We compared the outcomes of the reconstruction trochanteric antegrade nail (TAN) with the proximal femoral nail antirotation (PFNA). Between July 2008 and February 2014, we reviewed all patients with reverse oblique intertrochanteric fractures treated at our hospital. Patients with pathological fractures and those who were treated with other than TAN and PFNA nailing systems were excluded. Preoperative assessment included the Abbreviated mental test score (AMT), the ASA grade, pre-injury mobility and place of residence. Postoperative outcome measures included the type of implant used, time to fracture union, failures of fixation and revision surgeries. Fifty-eight patients were included and divided into two groups based on the treatment: 22 patients treated with TAN and 36 patients treated with PFNA systems. The two groups were well matched with regards to demographics and fracture type. The overall union rate was similar in both groups but the time to union was shorter in the TAN group. There were 8 implant failures in the PFNA (22.2%) group compare to none in the TAN group. Implant failure was associated with the severity of fracture (AO 31.A3.3) but was not related to fracture malreduction or screw position (Tip-apex-distance). Our study suggests that the use of reconstruction system with two screws such as TAN may be more suitable implant for reverse oblique intertrochanteric hip fractures. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Qualitative research ethics on the spot

    DEFF Research Database (Denmark)

    Sørensen, Nelli Øvre; Øye, Christine; Glasdam, Stinne

    2015-01-01

    , the article explores and discusses research ethical dilemmas. Objectives and ethical considerations: First, and especially, the article addresses the challenges for gatekeepers who influence the informant’s decisions to participate in research. Second, the article addresses the challenges in following...... research ethical guidelines related to informed consent and doing no harm. Third, the article argues for the importance of having research ethical guidelines and review boards to question and discuss the possible ethical dilemmas that occur in qualitative research. Discussion and conclusion: Research...... ethics must be understood in qualitative research as relational, situational, and emerging. That is, that focus on ethical issues and dilemmas has to be paid attention on the spot and not only at the desktop....

  13. Dispersion of hot spots in steam generators

    International Nuclear Information System (INIS)

    Achenbach, E.J.

    1988-01-01

    The streamwise development of hot spots in a helical type heat exchanger has been treated experimentally and theoretically as well. Velocity profiles across the bundle have been measured varying the Reynolds number, Re, from 10 3 to 1.35 x 10 5 . Pressurized air or helium have been applied as coolant. In an additional series of tests the length scale parameter of the turbulence structure has been determined. It is correlated with the turbulent Peclet number, Pe t , which occurs in the basic equation as an unknown parameter. Its value was found to be independent of Re (Pe t = 8.2). Introducing this value leads to a good agreement of theoretical and experimental results. (author)

  14. Auroral bright spot sequence near 14 MLT

    International Nuclear Information System (INIS)

    Sandholt, P.E.; Lybekk, B.

    1990-08-01

    Optical observations of a dayside auroral brightening sequence, by means of all-sky TV cameras and meridian scanning photometers, have been combined with EISCAT ion drift observations within the same invariant latitude - MLT sector. The reported events, covering a 35 min interval around 14 MLT, are embedded within a longer period of similar auroral activity between 0830 (1200 MLT) and 1300 UT (1600 MLT). These observations are discussed in relation to recent models of boundary layer plasma dynamics and the associated magnetosphere-ionosphere coupling. The ionospheric events may correspond to large-scale wavelike motions of the low-latitude boundary layer. Based on this interpretation the observed spot size, speed and repetition period (∼ 10 min) give a wavelenght ∼ 900 km in the present case. The events can also be explained as ionospheric signatures of newly opened flux tubes associated with reconnection bursts at the magnetopause near 1400 MLT. 46 refs., 11 figs

  15. A microsatellite platform for hot spot detection

    Energy Technology Data Exchange (ETDEWEB)

    Walter, I.; Briess, K.; Baerwald, W.; Lorenz, E.; Skrbek, W.; Schrandt, F. [DLR, Berlin (Germany). Inst. of Space Sensor Technology & Planetary Exploration

    2005-01-01

    The main payload of the BIRD micro-satellite is the newly developed hot spot recognition system. It's a dual-channel instrument for middle and thermal infrared imagery based on cooled MCT line detectors. The miniaturisation by integrated detector/cooler assemblies provides a highly efficient design. Since the launch in October 2001 from SHAR/India the BIRD payload, claiming 30% of the BIRD mass of 92 kg, is fully operational. Among others forest fires (Australia), volcanoes (Etna, Chile) and burning coal mines (China) have been detected and their parameters like size, temperature and energy release could be determined. As the status of the payload system is satisfactorily it has a potential to be applied in new missions with the help of modern detector technology.

  16. [The spotted sterile male--a new mutation of dominant spotting on the mouse chromosome 5].

    Science.gov (United States)

    Blandova, Z K; Vakhrusheva, M P; Malashenko, A M; Osipov, V V

    1986-06-01

    Spotted sterile male - a new mutation in mice is described (tentative symbol Ssm). White spotting on the belly, legs and tail as well as sterility in heterozygous males Ssm/+ of the B10.M strain are caused by autosomal semidominant gene Ssm. The gene is localized on the 5 chromosome: the frequency of recombination between Ssm and go is 13.6 +/- 1.6%; Ssm is closely linked to Wv. The diheterozygotes Ssm+/+Wv are darkeyed white sterile mice. The deficiency of spermatogenic epithelium cells, emptyness of seminiferous tubules as well as interstitial tissue overgrowing occurred in the testis in sterile males Ssm/+ of B10.M. The fertile hybrid males Ssm/+ are obtained in outcrossing of females Ssm/+ of B10.M with males of YT/Y, CBA/CaY, DBA/2JY, A.CA/Y strains.

  17. Fatigue crack growth retardation in spot heated mild steel sheet

    Indian Academy of Sciences (India)

    Unknown

    Abstract. A fatigue crack can be effectively retarded by heating a spot near the crack tip under nil remote stress condition. The subcritical spot heating at a proper position modifies the crack growth behaviour in a way, more or less, similar to specimen subjected to overload spike. It is observed that the extent of crack.

  18. Fatigue crack growth retardation in spot heated mild steel sheet

    Indian Academy of Sciences (India)

    Spot heating; overloading; fatigue crack growth retardation; residual stress; delay cycles. ... It is observed that the extent of crack growth retardation increases with increasing level of overload as well as with increasing spot temperature. It is also ... Manuscript received: 29 November 2001; Manuscript revised: 24 June 2002 ...

  19. Inheritance of resistance to angular leaf spot in yellow beans ...

    African Journals Online (AJOL)

    Angular leaf spot (Phaeoisariopsis griseola (Sacc) is an important disease of common bean (Phaseolus vulgaris L.) in most parts of Africa, causing yield losses of 40-80%. This study was carried out to determine the inheritance of resistance to angular leaf spot in yellow beans. Biparental crosses were done between ...

  20. Spatial Analysis of Accident Spots Using Weighted Severity Index ...

    African Journals Online (AJOL)

    Weighted Severity Index (WSI) was created based on these factors/drivers. Also, Density-based Clustering for Traffic Accident Risk (DBCTAR) was carried out to assist in ascertaining the distribution of Black Spots Severity (BSS). Results obtained include: shortestpath analysis, service area analysis, accident spot severity ...

  1. Fatigue crack growth retardation in spot heated mild steel sheet

    Indian Academy of Sciences (India)

    A fatigue crack can be effectively retarded by heating a spot near the crack tip under nil remote stress condition. The subcritical spot heating at a proper position modifies the crack growth behaviour in a way, more or less, similar to specimen subjected to overload spike. It is observed that the extent of crack growth retardation ...

  2. Identification of electricity spot models by using convolution particle filter

    NARCIS (Netherlands)

    Aihara, ShinIchi; Bagchi, Arunabha; Imreizeeq, E.S.N.

    2011-01-01

    We consider a slight perturbation of the Schwartz-Smith model for the electricity futures prices and the resulting modied spot model. Using the martingale property of the modied price under the risk neutral measure, we derive the arbitrage free model for the spot and futures prices. As the futures

  3. Food habits of Mexican Spotted Owls in Arizona

    Science.gov (United States)

    Joseph L. Ganey

    1992-01-01

    The Spotted Owl (Strix occidentalis) is most common in mature and old-growth coniferous forests throughout much of its range (Forsman et al. 1984, Laymon 1988, Ganey and Balda 1989a, Thomas et al. 1990). Proximate factors underlying habitat selection in Spotted Owls are understood poorly. Abundance and availability of food, however, may be a key...

  4. Spotted owl roost and nest site selection in northwestern California

    Science.gov (United States)

    J.A. Blakesley; A.B. Franklin; R.J. Gutierrez

    1992-01-01

    We directly observed roost and nest site selection in a population of northern spotted owls (Strix occidentalis caurina) in northwestern California during 1985-89. Because of potential biases caused by use of radio telemetry in previous studies, we examined habitat use relative to habitat availability at a level not previously reported for spotted...

  5. Different methods of fluoride delivery in prevention of white spot ...

    African Journals Online (AJOL)

    Orthodontic patients on fixed appliances are at an increased risk of developing white spot lesions which can progress to frank cavitations. Fluoride application in different forms has been shown to be effective in the reduction of formation of white spot lesions. The aim of this short communication is to discuss different ...

  6. Nucleus geometry and mechanical properties of resistance spot ...

    Indian Academy of Sciences (India)

    Abstract. In this study, mechanical properties of resistance spot welding of DP450 and DP600, galvanized and ungalvanized automotive sheets have been investigated. The specimens have been joined by resistance spot welding at different weld currents and times. Welded specimens have been examined for their ...

  7. Estimates of age, growth and mortality of spotted catfish, Arius ...

    African Journals Online (AJOL)

    Spotted catfish is a benthic species that can be found abundantly off the coast of Yunlin in southwestern Taiwan. Its biological parameters are little known. In this study, life history parameters of this species were estimated using samples caught by bottom trawling. The spotted catfish was the major bycatch species which ...

  8. Laser Beam Caustic Measurement with Focal Spot Analyser

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Gong, Hui; Bagger, Claus

    2005-01-01

    In industrial applications of high power CO2-lasers the caustic characteristics of the laser beam have great effects on the performance of the lasers. A welldefined high intense focused spot is essential for reliable production results. This paper presents a focal spot analyser that is developed...... for measuring the beam profiles of focused high power CO2-lasers....

  9. Treatment of White Spot Lesions with Icon (Resin Infiltration)

    Science.gov (United States)

    2017-03-23

    FROM: 59 MDW/SGVU SUBJECT: Professional Presentation Approval 8 MAR2017 1. Your paper, entitled T reatment of White Spot Lesions with Icon ( Resin ... Resin Infiltration) 6. TITLE OF MATERIAL TO BE PUBLISHED OR PRESENTED: Treatment of White Spot lesions with Icon ( Resin In filtration) 7. FUNDING

  10. 7 CFR 28.425 - Low Middling Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Low Middling Spotted Color. 28.425 Section 28.425 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Color. Low Middling Spotted Color is color which is within the range represented by a set of samples in...

  11. 7 CFR 28.422 - Strict Middling Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Strict Middling Spotted Color. 28.422 Section 28.422 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards... Color. Strict Middling Spotted Color is color which is within the range represented by a set of samples...

  12. Characterizing and identifying black spot resistance genes in polyploid roses

    Science.gov (United States)

    The ornamental quality of outdoor grown roses (Rosa hybrida) is under constant threat from foliar diseases, such as black spot caused by Diplocarpon rosae. Fungicides are primarily used to manage black spot; however, there is a high consumer demand for disease resistant roses which eliminate the nee...

  13. Alternaria leaf spot of sugar beet: factors associated with risk

    Science.gov (United States)

    Recently, increased incidence and severity of Alternaria leaf spot has been observed in Michigan and other growing regions. In the past, Alternaria leaf spot in sugar beet has been a minor foliar disease issue in the United States and management of this disease usually has not been required. If seve...

  14. inheritance of resistance to angular leaf spot in yellow beans ...

    African Journals Online (AJOL)

    Prof. Adipala Ekwamu

    Susceptible. II -indeterminate erect; III -indeterminate semi-prostate; ALS = Angular leaf spot. Isolation of Phaeoisariopsis griseola and plant inoculation. Isolation of angular leaf spot was made from lesions of naturally infected bean leaves showing fungal sporulation. In the case of non-sporulating lesions, the fungus was.

  15. Parameter estimation of electricity spot models from futures prices

    NARCIS (Netherlands)

    Aihara, ShinIchi; Bagchi, Arunabha; Imreizeeq, E.S.N.; Walter, E.

    We consider a slight perturbation of the Schwartz-Smith model for the electricity futures prices and the resulting modified spot model. Using the martingale property of the modified price under the risk neutral measure, we derive the arbitrage free model for the spot and futures prices. We estimate

  16. Firebrands and spotting ignition in large-scale fires

    Science.gov (United States)

    Eunmo Koo; Patrick J. Pagni; David R. Weise; John P. Woycheese

    2010-01-01

    Spotting ignition by lofted firebrands is a significant mechanism of fire spread, as observed in many largescale fires. The role of firebrands in fire propagation and the important parameters involved in spot fire development are studied. Historical large-scale fires, including wind-driven urban and wildland conflagrations and post-earthquake fires are given as...

  17. Optimization of resistance spot welding parameters for microalloyed steel sheets

    Science.gov (United States)

    Viňáš, Ján; Kaščák, Ľuboš; Greš, Miroslav

    2016-11-01

    The paper presents the results of resistance spot welding of hot-dip galvanized microalloyed steel sheets used in car body production. The spot welds were made with various welding currents and welding time values, but with a constant pressing force of welding electrodes. The welding current and welding time are the dominant characteristics in spot welding that affect the quality of spot welds, as well as their dimensions and load-bearing capacity. The load-bearing capacity of welded joints was evaluated by tensile test according to STN 05 1122 standard and dimensions and inner defects were evaluated by metallographic analysis by light optical microscope. Thewelding parameters of investigated microalloyed steel sheets were optimized for resistance spot welding on the pneumatic welding machine BPK 20.

  18. Ultrasonic assessment of tension shear strength in resistance spot welding

    Science.gov (United States)

    Moghanizadeh, Abbas

    2015-05-01

    Resistance spot welding is extensively used to join sheet steel in the automotive industry. Ultrasonic non-destructive techniques for evaluation of the mechanical properties of resistance spot welding are presented. The aim of this study is to develop the capability of the ultrasonic techniques as an efficient tool in the assessment of the welding characterization. Previous researches have indicated that the measurements of ultrasonic attenuation are sensitive to grain- size variations in an extensive range of metallic alloys. Other researchers have frequently described grain sizes which are able to have significant effects on the physical characteristics of the material. This research provides a novel method to estimate the tension-shear strengths of the resistance spot welding directly from the ultrasonic attenuation measurements. The effects of spot welding parameters on the ultrasonic waves are further investigated. The results confirm that it is possible to determine the spot welding parameters for individual quality by using ultrasonic test.

  19. Reliability of copper based alloys for electric resistance spot welding

    International Nuclear Information System (INIS)

    Jovanovicj, M.; Mihajlovicj, A.; Sherbedzhija, B.

    1977-01-01

    Durability of copper based alloys (B-5 and B-6) for electric resistance spot-welding was examined. The total amount of Be, Ni and Zr was up to 2 and 1 wt.% respectively. Good durability and satisfactory quality of welded spots were obtained in previous laboratory experiments carried out on the fixed spot-welding machine of an industrial type (only B-5 alloy was examined). Electrodes made of both B-5 and B-6 alloy were tested on spot-welding grips and fixed spot-welding machines in Tvornica automobila Sarajevo (TAS). The obtained results suggest that the durability of electrodes made of B-5 and B-6 alloys is more than twice better than of that used in TAS

  20. Tangaroa TAN0607 cruise report : gas hydrate exploration on the East Coast, North Island, New Zealand

    International Nuclear Information System (INIS)

    Pecher, I.A.; Coffin, R.; Henrys, S.A.

    2007-01-01

    R/V Tangaroa's voyage TAN0607, 20 June to 2 July 2006, Wellington/Wellington, was the first-ever research campaign dedicated to studying gas hydrates on the Hikurangi margin. The cruise was a collaboration between GNS Science, the US Naval Research Laboratory, the National Institute of Water and Atmospheric Research, the Universities of Otago, Hawaii, and Rochester (New York), as well as individual scientists from the University of Auckland and the GeoForschungsZentrum Potsdam. We collected high-resolution seismic data, EM 300 swath bathymetry, 3.5 kHz sub-bottom, as well as 12, 38 and 120 kHz water column echosounder data. Piston cores were recovered for pore water chemistry, microbiology, core description, and paleoceanographic analyses. We acquired heatflow data using a violin-bow type probe rented from the Geological Survey of Canada. We also retrieved three dredge samples from the seafloor. Finally, Niskin bottles attached to CTDs were used to collect seawater for water-column chemistry. The cruise focused on two study areas, the Porangahau Ridge offshore of the Wairarapa and the Rock Garden off Hawke's Bay. Seismic data from 2005 showed an amplitude anomaly beneath the Porangahau Ridge that appears to be caused by gas within the regional gas hydrate stability zone and may indicate the presence of highly concentrated gas hydrates in the vicinity. We acquired nine seismic lines across the ridge to constrain the lateral extent of this anomaly. The anomaly seems to develop with folding and may be linked to enhanced fluid flow through the gas hydrate stability field, which in turn may lead to elevated gas hydrate concentration. Pore water chemistry shows a shoaling of the base of the sulfate reduction zone across this feature, indicative of elevated methane flux through the hydrate stability field. There is a distinct thermal anomaly across the Porangahau Ridge, albeit with a complex signature. On the other hand, there are no indications of methane expulsion into

  1. Geodetic mass balance of the Patagonian Icefields from STRM and TanDEM-X DEMs

    Science.gov (United States)

    Abdel Jaber, W.; Floricioiu, D.; Rott, H.

    2016-12-01

    The Northern and Southern Patagonian Icefields (NPI & SPI), represent the largest mid-latitude ice masses in the Southern Hemisphere. They are mostly drained by outlet glaciers with fronts calving into fresh water lakes or Pacific fjords. Both icefields were affected by significant downwasting in the last decades, as confirmed by published mass change trends obtained by means of gravimetric measurements and geodetic methods. Given their unique characteristics and the significant contribution to sea level rise per unit of area, they represent a fundamental barometer for climate research. The Shuttle Radar Topography Mission (SRTM) of 2000 provided the most complete and accurate Digital Elevation Model (DEM) at the time covering the entire globe from 56°S to 60°N. The present TanDEM-X mission shares the same objective aiming at a global coverage with much higher resolution and accuracy. Their combination leads to a unique multitemporal elevation dataset based solely on SAR single pass bistatic interferometry characterized by 11 to 16 year time span: an ideal setup for monitoring long-term large-scale geophysical phenomena. Using this dataset, detailed and extensive ice elevation change maps were obtained for the 12900 km² SPI for the observation period 2000 - 2011/2012 and for the 3900 km² NPI for the period 2000 - 2014. These maps were used to compute the glacier mass balance of the icefields through the geodetic method. Particular emphasis was set on the estimation of the uncertainty of the geodetic mass balance by quantifying all relevant sources of error. Among these, signal penetration into dry ice and snow can affect considerably radar elevation measurements. For this purpose the backscattering coefficient of the acquisitions along with concurrent meteorological data were analyzed to assess the conditions of the icefield surface. Mass change rates of -3.96±0.14 Gt a-1 and of -13.14±0.42 Gt a-1 (excluding subaqueous loss) were obtained for NPI and SPI

  2. Phenotypic Plasticity through Transcriptional Regulation of the Evolutionary Hotspot Gene tan in Drosophila melanogaster.

    Directory of Open Access Journals (Sweden)

    Jean-Michel Gibert

    2016-08-01

    Full Text Available Phenotypic plasticity is the ability of a given genotype to produce different phenotypes in response to distinct environmental conditions. Phenotypic plasticity can be adaptive. Furthermore, it is thought to facilitate evolution. Although phenotypic plasticity is a widespread phenomenon, its molecular mechanisms are only beginning to be unravelled. Environmental conditions can affect gene expression through modification of chromatin structure, mainly via histone modifications, nucleosome remodelling or DNA methylation, suggesting that phenotypic plasticity might partly be due to chromatin plasticity. As a model of phenotypic plasticity, we study abdominal pigmentation of Drosophila melanogaster females, which is temperature sensitive. Abdominal pigmentation is indeed darker in females grown at 18°C than at 29°C. This phenomenon is thought to be adaptive as the dark pigmentation produced at lower temperature increases body temperature. We show here that temperature modulates the expression of tan (t, a pigmentation gene involved in melanin production. t is expressed 7 times more at 18°C than at 29°C in female abdominal epidermis. Genetic experiments show that modulation of t expression by temperature is essential for female abdominal pigmentation plasticity. Temperature modulates the activity of an enhancer of t without modifying compaction of its chromatin or level of the active histone mark H3K27ac. By contrast, the active mark H3K4me3 on the t promoter is strongly modulated by temperature. The H3K4 methyl-transferase involved in this process is likely Trithorax, as we show that it regulates t expression and the H3K4me3 level on the t promoter and also participates in female pigmentation and its plasticity. Interestingly, t was previously shown to be involved in inter-individual variation of female abdominal pigmentation in Drosophila melanogaster, and in abdominal pigmentation divergence between Drosophila species. Sensitivity of t

  3. Meteorology of Jupiter's Equatorial Hot Spots and Plumes from Cassini

    Science.gov (United States)

    Choi, David Sanghun; Showman, Adam P.; Vasavada, Ashwin R.; Simon-Miller, Amy A.

    2013-01-01

    We present an updated analysis of Jupiter's equatorial meteorology from Cassini observations. For two months preceding the spacecraft's closest approach, the Imaging Science Subsystem (ISS) onboard regularly imaged the atmosphere. We created time-lapse movies from this period in order to analyze the dynamics of equatorial hot spots and their interactions with adjacent latitudes. Hot spots are relatively cloud-free regions that emit strongly at 5 lm; improved knowledge of these features is crucial for fully understanding Galileo probe measurements taken during its descent through one. Hot spots are quasistable, rectangular dark areas on visible-wavelength images, with defined eastern edges that sharply contrast with surrounding clouds, but diffuse western edges serving as nebulous boundaries with adjacent equatorial plumes. Hot spots exhibit significant variations in size and shape over timescales of days and weeks. Some of these changes correspond with passing vortex systems from adjacent latitudes interacting with hot spots. Strong anticyclonic gyres present to the south and southeast of the dark areas appear to circulate into hot spots. Impressive, bright white plumes occupy spaces in between hot spots. Compact cirrus-like 'scooter' clouds flow rapidly through the plumes before disappearing within the dark areas. These clouds travel at 150-200 m/s, much faster than the 100 m/s hot spot and plume drift speed. This raises the possibility that the scooter clouds may be more illustrative of the actual jet stream speed at these latitudes. Most previously published zonal wind profiles represent the drift speed of the hot spots at their latitude from pattern matching of the entire longitudinal image strip. If a downward branch of an equatorially-trapped Rossby wave controls the overall appearance of hot spots, however, the westward phase velocity of the wave leads to underestimates of the true jet stream speed.

  4. Wood ant nests as hot spots of carbon dioxide production and cold spots of methane oxidation in temperate forests

    Czech Academy of Sciences Publication Activity Database

    Jílková, Veronika; Picek, T.; Cajthaml, Tomáš; Frouz, Jan

    2016-01-01

    Roč. 18, April (2016), EGU2016-4634 ISSN 1607-7962. [European Geosciences Union General Assembly 2016. 17.04.2016-22.04.2016, Vienna] Institutional support: RVO:60077344 ; RVO:61388971 Keywords : wood ant nests * hot spots of carbon dioxide production * cold spots of methane oxidation * temperate forests Subject RIV: DF - Soil Science

  5. Removal of Cr(III) from chrome tanning wastewater by adsorption using two natural carbonaceous materials: Eggshell and powdered marble.

    Science.gov (United States)

    Elabbas, Saliha; Mandi, Laila; Berrekhis, Fatima; Pons, Marie Noelle; Leclerc, Jean Pierre; Ouazzani, Naaila

    2016-01-15

    In the present paper, eggshell and powdered marble, two carbonaceous materials, were used to remove Cr(III) ions from a real chrome tanning wastewater. The effects of initial effluent pH, adsorbent dose, contact time and temperature were studied. The maximum uptake of chromium ions was obtained at pH 5.0 with the dose 20 g L(-1) and 12 g L(-1) for eggshell and powdered marble respectively. Adsorption equilibrium was reached after 14 h contact time for eggshell and only after 30 min for powdered marble. Under these conditions, almost 99% Cr(III) was removed from chrome tanning wastewater having an initial concentration of chromium of 3.21 g L(-1). Kinetic data were satisfactorily described by a pseudo-second order chemical sorption model. The equilibrium rate constant was notably greater for powdered marble than for eggshell with 1.142·10(-3) (g mg(-1) min(-1)) and 0.041·10(-3) (g mg(-1) min(-1)) respectively. The adsorption isotherm were well described by a Langmuir model and showed that the interaction of chromium with the two adsorbents surface is a localized monolayer adsorption with a smaller energy constant for the powdered marble than for eggshell (0.020 (L mg(-1)) and 0.083 (L mg(-1)) respectively). The powdered marble was able to adsorb faster a large amount of Cr (III) in comparison to eggshell. The use of a standardized lettuce seed bioassay allowed evaluating a better effectiveness of the Cr adsorption on the powdered marble, removing up to 40% of the treated effluent toxicity than by eggshell 25%. The powdered marble could be considered as an effective, low cost carbonaceous material to be used for chromium removal from tanning wastewater. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Do melanoidins induced by topical 9% dihydroxyacetone sunless tanning spray inhibit vitamin d production? A pilot study.

    Science.gov (United States)

    Armas, Laura A G; Fusaro, Ramon M; Sayre, Robert M; Huerter, Christopher J; Heaney, Robert P

    2009-01-01

    We report here preliminary pilot study data of the effect of sunless tanning spray with 9% [Correction added after online publication (August 24th, 2009): The concentration of Dihydroxyacetone used in the study was 9% and not 3% as previously stated] dihydroxyacetone (DHA) on 25-hydroxyvitamin D [25(OH)D] serum levels in subjects exposed to controlled amounts of UV-B radiation during April/May in Omaha, NE, 41 degrees N latitude. We found that DHA-induced melanoidins in skin act as a topical sunscreen attenuating the formation of 25(OH)D.

  7. Investigation On Natural Background Radioactivity At TanLong, Lagi, BinhThuan Residential Area On Ilmenite Deposit Location

    International Nuclear Information System (INIS)

    Pham Thi Kim Loan; Tran Van Luyen; Thai Khac Dinh

    2008-01-01

    An Ilmenite deposit zone located at TanLong, Lagi, Binh Thuan province. After the year of 2000, a new village of population has set up at this place. To estimate the effect on the human health of radioactivity accompanying with the deposit, the sand samples were collected and natural radioactive analyzed at center for nuclear techniques. The average year doses D annual , hazard radiation exposed index H ex and Radium equivalence Ra eq were calculated based on the natural radioactivities. The results show that these factors are overcome the international average as well as southern Vietnam values. (author)

  8. Analysis of blood spots for polyfluoroalkyl chemicals

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Kayoko; Wanigatunga, Amal A.; Needham, Larry L. [Division of Laboratory Sciences, National Center for Environmental Health, Centers for Disease Control and Prevention, Atlanta, GA (United States); Calafat, Antonia M., E-mail: acalafat@cdc.gov [Division of Laboratory Sciences, National Center for Environmental Health, Centers for Disease Control and Prevention, Atlanta, GA (United States)

    2009-12-10

    Polyfluoroalkyl chemicals (PFCs) have been detected in humans, in the environment, and in ecosystems around the world. The potential for developmental and reproductive toxicities of some PFCs is of concern especially to children's health. In the United States, a sample of a baby's blood, called a 'dried blood spot' (DBS), is obtained from a heel stick within 48 h of a child's birth. DBS could be useful for assessing prenatal exposure to PFCs. We developed a method based on online solid phase extraction coupled with high performance liquid chromatography-isotope dilution tandem mass spectrometry for measuring four PFCs in DBS, perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate, perfluorooctanoate (PFOA), and perfluorononanoate. The analytical limits of detection using one whole DBS ({approx}75 {mu}L of blood) were <0.5 ng mL{sup -1}. To validate the method, we analyzed 98 DBS collected in May 2007 in the United States. PFOS and PFOA were detected in all DBS at concentrations in the low ng mL{sup -1} range. These data suggest that DBS may be a suitable matrix for assessing perinatal exposure to PFCs, but additional information related to sampling and specimen storage is needed to demonstrate the utility of these measures for assessing exposure.

  9. Review: magnetically assisted resistance spot welding

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y. B. [Shanghai Jiao Tong Univ., Shanghai (China); Li, D. L. [Shanghai Jiao Tong Univ., Shanghai (China); Lin, Z. Q. [Shanghai Jiao Tong Univ., Shanghai (China); David, Stan A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Feng, Zhili [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tang, Wei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-02-25

    Currently, the use of advanced high strength steels (AHSSs) is the most cost effective means of reducing vehicle body weight and maintaining structural integrity at the same time. However, AHSSs present a big challenge to the traditional resistance spot welding (RSW) widely applied in automotive industries because the rapid heating and cooling procedures during RSW produce hardened weld microstructures, which lower the ductility and fatigue properties of welded joints and raise the probability of interfacial failure under external loads. Changing process parameters or post-weld heat treatment may reduce the weld brittleness, but those traditional quality control methods also increase energy consumption and prolong cycle time. In recent years, a magnetically assisted RSW (MA-RSW) method was proposed, in which an externally applied magnetic field would interact with the conduction current to produce a Lorentz force that would affect weld nugget formation. This paper is a review of an experimental MA-RSW platform, the mode of the external magnetic field and the mechanism that controls nugget shape, weld microstructures and joint performance. In conclusion, the advantages of the MA-RSW method in improving the weldability of AHSSs are given, a recent application of the MA-RSW process to light metals is described and the outlook for the MA-RSW process is presented.

  10. Turbulent Spot Pressure Fluctuation Wave Packet Model

    Energy Technology Data Exchange (ETDEWEB)

    Dechant, Lawrence J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    Wave packet analysis provides a connection between linear small disturbance theory and subsequent nonlinear turbulent spot flow behavior. The traditional association between linear stability analysis and nonlinear wave form is developed via the method of stationary phase whereby asymptotic (simplified) mean flow solutions are used to estimate dispersion behavior and stationary phase approximation are used to invert the associated Fourier transform. The resulting process typically requires nonlinear algebraic equations inversions that can be best performed numerically, which partially mitigates the value of the approximation as compared to a more complete, e.g. DNS or linear/nonlinear adjoint methods. To obtain a simpler, closed-form analytical result, the complete packet solution is modeled via approximate amplitude (linear convected kinematic wave initial value problem) and local sinusoidal (wave equation) expressions. Significantly, the initial value for the kinematic wave transport expression follows from a separable variable coefficient approximation to the linearized pressure fluctuation Poisson expression. The resulting amplitude solution, while approximate in nature, nonetheless, appears to mimic many of the global features, e.g. transitional flow intermittency and pressure fluctuation magnitude behavior. A low wave number wave packet models also recover meaningful auto-correlation and low frequency spectral behaviors.

  11. Mediterranean spotted fever in southeastern Romania.

    Science.gov (United States)

    Pitigoi, Daniela; Olaru, Ioana D; Badescu, Daniela; Rafila, Alexandru; Arama, Victoria; Hristea, Adriana

    2013-01-01

    Although cases of Mediterranean spotted fever (MSF) have been reported for decades in southeastern Romania, there are few published data. We retrospectively studied 339 patients, diagnosed with MSF at the National Institute of Infectious Diseases "Prof. Dr. Matei Bals" between 2000 and 2011, in order to raise awareness about MSF in certain regions of Romania. According to the Raoult diagnostic criteria 171 (50.4%) had a score >25 points. Mean age was 52.5 years. One hundred and fifty-five (90.6%) patients were from Bucharest and the surrounding region. Almost all patients presented with fever (99.4%) and rash (98.2%), and 57.9% had evidence of a tick bite. There were no recorded deaths. Serologic diagnosis was made by indirect immunofluorescence assay. Of the 171 patients, serology results for R. conorii were available in 147. One hundred and twenty-three (83.7%) of them had a titer IgG ≥1:160 or a fourfold increase in titer in paired samples. MSF is endemic in southeastern Romania and should be considered in patients with fever and rash even in the absence of recognized tick exposure. Since the disease is prevalent in areas highly frequented by tourists, travel-associated MSF should be suspected in patients with characteristic symptoms returning from the endemic area.

  12. Mediterranean Spotted Fever in Southeastern Romania

    Directory of Open Access Journals (Sweden)

    Daniela Pitigoi

    2013-01-01

    Full Text Available Although cases of Mediterranean spotted fever (MSF have been reported for decades in southeastern Romania, there are few published data. We retrospectively studied 339 patients, diagnosed with MSF at the National Institute of Infectious Diseases “Prof. Dr. Matei Bals” between 2000 and 2011, in order to raise awareness about MSF in certain regions of Romania. According to the Raoult diagnostic criteria 171 (50.4% had a score >25 points. Mean age was 52.5 years. One hundred and fifty-five (90.6% patients were from Bucharest and the surrounding region. Almost all patients presented with fever (99.4% and rash (98.2%, and 57.9% had evidence of a tick bite. There were no recorded deaths. Serologic diagnosis was made by indirect immunofluorescence assay. Of the 171 patients, serology results for R. conorii were available in 147. One hundred and twenty-three (83.7% of them had a titer IgG ≥1 : 160 or a fourfold increase in titer in paired samples. MSF is endemic in southeastern Romania and should be considered in patients with fever and rash even in the absence of recognized tick exposure. Since the disease is prevalent in areas highly frequented by tourists, travel-associated MSF should be suspected in patients with characteristic symptoms returning from the endemic area.

  13. Feast or famine: 1992 spot market review

    Energy Technology Data Exchange (ETDEWEB)

    1993-01-01

    There was nothing temperate about the uranium spot market in 1992. It was a year of extremes. Demand took off at a brisk pace early in the year as utilities, enticed by low U3O8 prices and interest rates, stepped up their discretionary purchases. With the NUKEM price range sinking to an all-time low of US$6.75-7.70 in November 1991, utilities reckoned that prices had bottomed out and decided to buy and hold material. Indeed, the upper end of NUKEM's range remained below $8.00 per lb for much of the first half of 1992. The main cause of low prices was the flood of imports from the crumbling Soviet Union and its successor, the Commonwealth of Independent States [CIS]. The CIS republics quickly embraced a free-market philosophy to boost their faltering economies, and several hoped to use uranium as a source of badly-needed hard currency. But they were about to get a harsh introduction to capitalism. It came in the form of government intervention, in both the US and Europe. In May, the US Department of Commerce made its preliminary determination that the uranium-producing republics of the CIS were selling material in the US at less than fair market value. The antidumping case was eventually settled in October when the CIS republics [Russia, Ukraine, Uzbekistan, Kazakhstan, Tajikistan and Kyrgyzstan] signed suspension agreements subjecting CIS origin uranium to price and quantity quotas in the US.

  14. Finite Cosmology and a CMB Cold Spot

    Energy Technology Data Exchange (ETDEWEB)

    Adler, R.J.; /Stanford U., HEPL; Bjorken, J.D.; /SLAC; Overduin, J.M.; /Stanford U., HEPL

    2006-03-20

    The standard cosmological model posits a spatially flat universe of infinite extent. However, no observation, even in principle, could verify that the matter extends to infinity. In this work we model the universe as a finite spherical ball of dust and dark energy, and obtain a lower limit estimate of its mass and present size: the mass is at least 5 x 10{sup 23}M{sub {circle_dot}} and the present radius is at least 50 Gly. If we are not too far from the dust-ball edge we might expect to see a cold spot in the cosmic microwave background, and there might be suppression of the low multipoles in the angular power spectrum. Thus the model may be testable, at least in principle. We also obtain and discuss the geometry exterior to the dust ball; it is Schwarzschild-de Sitter with a naked singularity, and provides an interesting picture of cosmogenesis. Finally we briefly sketch how radiation and inflation eras may be incorporated into the model.

  15. Comparison of outcomes between overlapping-spot and single-spot photodynamic therapy for circumscribed choroidal hemangioma

    Directory of Open Access Journals (Sweden)

    Zhao-An Su

    2014-02-01

    Full Text Available AIM:To compare the efficacy and safety of photodynamic therapy (PDT with overlapping multiple spots and single spot for treating circumscribed choroidal hemangioma.METHODS:Twenty-two patients (22 eyes with symptomatic circumscribed choroidal hemangioma received PDT treatment. Fourteen patients received overlapping spots (two to three spots PDT, whereas eight patients received single-spot PDT. Laser was used at 50J/cm2 for 83s in the overlapping-spot group and 50J/cm2 for 166s in the single-spot group. Clinical examination, funduscopy, fluorescein angiography, and ultrasonography were performed at baseline and after treatment.RESULTS:The mean follow-up time was 28.5±8.0 months in the overlapping-spot group and 27.0±5.0 months in the single-spot group. Nine patients (64.2% had their vision improved over two lines on the Snellen chart, and five patients showed stable visual acuity in the overlapping-spot group. The mean thickness of tumor decreased from 2.7±0.8mm to 1.2±0.9mm, and the mean greatest tumor linear dimension decreased from 7.4±1.5mm to 4.5±3.5mm after treatment. In the single-spot group, two patients (25% had their vision improved over two lines on the Snellen chart, and six patients had unchanged stable vision. The mean tumor thickness in this group decreased from 2.5±0.7mm to 1.4±1.0mm, and the mean greatest tumor linear dimension decreased from 7.2±1.3mm to 4.7±3.6mm. No significant differences in visual improvement and tumor regression were found between the two groups.CONCLUSION: Overlapping-spot PDT under appropriate treatment parameters and strategies is as effective and safe as single-spot PDT for treating symptomatic circumscribed choroidal hemangioma. Improved or stabilized visual acuity was achieved as a result of tumor regression.

  16. Spots educativos : un modelo de evaluación creativa

    Directory of Open Access Journals (Sweden)

    Jorge Montalvo-Castro

    2010-03-01

    Full Text Available En esta investigación se precisan las semejanzas y diferencias entre los spots comerciales, sociales y educativos. Se analizan el problema de la eficacia de los spots y el papel de la creatividad. Además, se plantea la necesidad de contar con un modelo apropiado de evaluación de spots educativos que tome en cuenta ciertos principios de la teoría del aprendizaje significativo de David Ausubel. Finalmente, se diseña y propone un modelo de evaluación creativa —tipo lista de cotejo— que es sometido a una prueba experimental y cuyos resultados apoyan el planteamiento.

  17. Weld Spot Detection by Color Segmentation and Template Convolution

    Science.gov (United States)

    Cambrini, Luigi; Biber, Jürgen; Hönigmann, Dieter; Löhndorf, Maike

    2007-12-01

    There is a need of non-destructive evaluation of the quality of steel spot welds. A computer-vision based solution is presented performing the analysis of the weld spot imprints left by the electrode on the protection bands. In this paper we propose two different methods to locate the position of the weld spot imprint as a first step in order to verify the quality of the welding process; both methods consist of two stages: (i) the use of the X channel of the XYZ color space as a proper representation, and (ii) the analysis of this image channel by employing specific algorithms.

  18. Spot: a new Monte Carlo solver for fast alpha particles

    International Nuclear Information System (INIS)

    Schneider, M.; Eriksson, L.G.; Basiuk, V.; Imbeaux, F.

    2004-01-01

    The predictive transport code CRONOS has been augmented by an orbit following Monte Carlo code, SPOT (Simulation of Particle Orbits in a Tokamak). The SPOT code simulates the dynamics of nonthermal particles, and takes into account effects of finite orbit width and collisional transport of fast ions. Recent developments indicate that it might be difficult to avoid, at least transiently, current holes in a reactor. They occur already on existing tokamaks during advanced tokamak scenarios. The SPOT code has been used to study the alpha particle behaviour in the presence of current holes for both JET and ITER relevant parameters. (authors)

  19. Reflections on the reporting of the uranium spot price

    International Nuclear Information System (INIS)

    Novak, E.D.

    1984-01-01

    Reporting of the Spot Uranium Price does not represent the uranium market, but actually represents the extremities of a market. The Spot Prices tend to cause instabilities in the market if relied upon too heavily and an excessive use will actually support a questionable transition from a fuel supply industry to a commodities industry. Utility fuel buyers and uranium sellers must be careful how they use the Spot Price, or they will continue to create an unstable supply/demand relationship. But, since we all rely upon statistics for the illusion of independence, we may get the commodities market, assisted along by the information people, whether we want it or not

  20. Modelling energy spot prices by Lévy semistationary processes

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole; Benth, Fred Espen; Veraart, Almut

    This paper introduces a new modelling framework for energy spot prices based on Lévy semistationary processes. Lévy semistationary processes are special cases of the general class of ambit processes. We provide a detailed analysis of the probabilistic properties of such models and we show how the...... they are able to capture many of the stylised facts observed in energy markets. Furthermore, we derive forward prices based on our spot price model. As it turns out, many of the classical spot models can be embedded into our novel modelling framework....

  1. Weld Spot Detection by Color Segmentation and Template Convolution

    International Nuclear Information System (INIS)

    Cambrini, Luigi; Biber, Juergen; Hoenigmann, Dieter; Loehndorf, Maike

    2007-01-01

    There is a need of non-destructive evaluation of the quality of steel spot welds. A computer-vision based solution is presented performing the analysis of the weld spot imprints left by the electrode on the protection bands. In this paper we propose two different methods to locate the position of the weld spot imprint as a first step in order to verify the quality of the welding process; both methods consist of two stages: (i) the use of the X channel of the XYZ color space as a proper representation, and (ii) the analysis of this image channel by employing specific algorithms

  2. Spot Welding of 6061 Aluminum Alloy by Friction Stir Spot Welding Process

    Directory of Open Access Journals (Sweden)

    M. A. Tashkandi

    2017-06-01

    Full Text Available This study was focused on the effect of welding parameters on the lap-shear fracture load of the welded joints prepared by friction stir spot welding. Four different weld parameters were analyzed: rotational speed, dwell time, pin length and shoulder size of the welding tool. It was found that the lap-shear fracture load increases with an increase of the welding parameters to a limited value and decreases with further increase. The strong welded joints failed under nugget-pull out fracture.

  3. Bronze is beautiful but pale can be pretty: the effects of appearance standards and mortality salience on sun-tanning outcomes.

    Science.gov (United States)

    Cox, Cathy R; Cooper, Douglas P; Vess, Matthew; Arndt, Jamie; Goldenberg, Jamie L; Routledge, Clay

    2009-11-01

    Using the terror management health model (J. L. Goldenberg & J. Arndt, 2008), the authors examined tanning outcomes as a function of priming tanning-relevant standards for attractiveness after reminders of death. Study 1 consisted of 101 female college students recruited from a midwestern university; Study 2 consisted of 53 female participants recruited from a beach in south Florida. In both experiments, participants answered questions about their mortality or a control topic, and were presented with a fashion article that highlighted either the attractiveness of tanned (just in Study 1), pale, or natural-looking skin. Self-reported suntan intentions (Study 1) and sunscreen intentions (Study 2). Study 2 also assessed participants' interest in various sun protection products. Study 1 demonstrated that mortality salience led to higher tanning intentions when the association between tanned skin and physical attractiveness was made salient and reduced intentions when the attractiveness of paler skin was highlighted. In Study 2, beachgoers, after reminders of death, reported greater preference for high sun protection sunscreen after reading an article about the attractiveness of paler skin tones. These findings contribute to an emerging understanding of how mortality concerns can influence health-related judgment and behavior. PsycINFO Database Record (c) 2009 APA, all rights reserved.

  4. Stoichiometry behavior of TaN, TaCN and TaC thin films produced by magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Vargas, M. [Centro de Nanociencia y Nanotecnología, Universidad Nacional Autónoma de México, A.P. 2681, C.P. 22860, Ensenada, B.C. (Mexico); Castillo, H.A. [Centro de Enseñanza Técnica y Superior, CETYS Universidad, Campus Tijuana, Tijuana, B.C. (Mexico); Restrepo-Parra, E., E-mail: erestrepopa@unal.edu.co [Universidad Nacional de Colombia Sede Medellín Colombia, Facultad de Minas, Manizales (Colombia); De La Cruz, W. [Centro de Nanociencia y Nanotecnología, Universidad Nacional Autónoma de México, A.P. 2681, C.P. 22860, Ensenada, B.C. (Mexico)

    2013-08-15

    Thin films were synthesized in a magnetron sputtering system using a target of Ta with 99.99% purity and silicon substrates (1 1 1). The gases used for the film growth were (Ar + N{sub 2}), (Ar + CH{sub 4} + N{sub 2}) and (Ar + CH{sub 4}) mixtures for TaN, TaCN and TaC, respectively. The substrate temperature increased from room temperature to 500 °C. The chemical composition and bonding configuration were examined using X-ray photoelectron spectroscopy (XPS), revealing Ta-N, Ta-C-N, Ta-C and C-C bonds. Moreover, the crystallographic structure was analyzed using X-ray diffraction (XRD), indicating the presence of (1 1 1) and (2 0 0) planes belonging to a face-centered cubic structure. The stoichiometry variation dependence on the CH{sub 4} and N{sub 2} flow was analyzed, and the influence of the substrate temperature on the coatings was investigated. Finally, scanning electron microscopy (SEM) was used to determine the evolution on the grain formation in the coatings as the substrate temperature increased.

  5. Impacts of the globalized economy on the environment: the tanning industry in the Vale do Rio dos Sinos.

    Science.gov (United States)

    Figueiredo-Sganderla, J A; Prodanov, C C; Daroit, D

    2010-12-01

    This case study analysed the impact of the global economy on the environment of the Vale do Rio do Sinos region in southern Brazil. Interviews and questionnaires were used to collect data from social, cultural, economic and political agents in this region, and documents about the tanning industry were reviewed and analysed. Global perspectives and local conditions were brought together to understand the causes and consequences of social, political and economic structures and to evaluate the intrinsic association of the tanning industry with the social, historical and cultural development of the Vale do Rio dos Sinos. The behaviour of the local community, where individuals believe that progress is primordially based on industrial development and go to any lengths to achieve it, was also studied. The analysis of industries that have a high contamination potential revealed that dirty industries moved from central to peripheral countries up to the 1980s, but movement is currently internal and occurs between states in Brazil due to several types of incentives.

  6. Ultraviolet spectral distribution and erythema-weighted irradiance from indoor tanning devices compared with solar radiation exposures.

    Science.gov (United States)

    Sola, Yolanda; Baeza, David; Gómez, Miguel; Lorente, Jerónimo

    2016-08-01

    Concern regarding the impact of indoor tanning devices on human health has led to different regulations and recommendations, which set limits on erythema-weighted irradiance. Here, we analyze spectral emissions from 52 tanning devices in Spanish facilities and compare them with surface solar irradiance for different solar zenith angles. Whereas most of the devices emitted less UV-B radiation than the midday summer sun, the unweighted UV-A irradiance was 2-6 times higher than solar radiation. Moreover, the spectral distributions of indoor devices were completely different from that of solar radiation, differing in one order of magnitude at some UV-A wavelengths, depending on the lamp characteristics. In 21% of the devices tested, the erythema-weighted irradiance exceeded 0.3Wm(-2): the limit fixed by the European standard and the Spanish regulation. Moreover, 29% of the devices fall within the UV type 4 classification, for which medical advice is required. The high variability in erythema-weighted irradiance results in a wide range of exposure times to reach 1 standard erythemal dose (SED: 100Jm(-2)), with 62% of devices requiring exposures of solar UV-A dose. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Tereyağlarından İzole Edilen Koliform Grubu Bakterilerin Tanımlanması

    Directory of Open Access Journals (Sweden)

    Selahattin Sert

    2015-02-01

    Full Text Available Bu araştırmada, Erzurum piyasasında kahvaltılık olarak satılan tereyağlarından koliform grubu bakteriler izole edilmiş ve tanımlanmasına çalışılmıştır. Yirmidört örnekten izole edilen 187 adet koliform suşundan 41’i (%21.9 Escherichia coli Tip II, 32’si (%17.1 Klebsiella spp, 27’si (%14.4 E. coli Tip I 22’si (%11.8 Enterobacter aerogenes, 18’i (%9.6 K. pneumoniae, 12’si (%6.4 Ent. cloceae, 12’si (%6.4 ,Ent. Agglomerans, 8’i (%4.3 Citrobacter freundii ve 6’sı da (%3.2 C. divercus olarak identifiye edilmiştir. Dokuz suş ise (%4.8 tanımlanamamıştır.

  8. Impacts of the globalized economy on the environment: the tanning industry in the Vale do Rio dos Sinos

    Directory of Open Access Journals (Sweden)

    JA. Figueiredo-Sganderla

    Full Text Available This case study analysed the impact of the global economy on the environment of the Vale do Rio do Sinos region in southern Brazil. Interviews and questionnaires were used to collect data from social, cultural, economic and political agents in this region, and documents about the tanning industry were reviewed and analysed. Global perspectives and local conditions were brought together to understand the causes and consequences of social, political and economic structures and to evaluate the intrinsic association of the tanning industry with the social, historical and cultural development of the Vale do Rio dos Sinos. The behaviour of the local community, where individuals believe that progress is primordially based on industrial development and go to any lengths to achieve it, was also studied. The analysis of industries that have a high contamination potential revealed that dirty industries moved from central to peripheral countries up to the 1980s, but movement is currently internal and occurs between states in Brazil due to several types of incentives.

  9. Extraction and Optimization of Natural Dye from Hambo Hambo (Cassia singueana Plant Used for Coloration of Tanned Leather Materials

    Directory of Open Access Journals (Sweden)

    Taame Berhanu

    2017-01-01

    Full Text Available This investigation was aimed at introducing natural dye extracted from the bark of Cassia Singueana plant for dyeing chrome tanned sheep skin crust leather. The colorant was extracted by aqueous extraction and its strength evaluated using UV-Visible spectroscopy. The extraction with the highest strength (3.9 at λmax of 400 nm was obtained at temperature of 95°C, concentration of 60 g/l, and time of 60 minutes. The possibility of using aloe vera juice and mango bark extract as natural mordants for leather coloration was investigated. Dyeing was conducted with and without mordant using different combinations of temperature, time, pH, and concentration of mordants. All three mordanting techniques were evaluated. The color strength (K/S, CIE L⁎a⁎b⁎ values, and fastness properties (light, rubbing, and perspiration of dyed leather samples were evaluated using appropriate instruments and according to international standards. Majority of samples exhibited that fastness result was in the range of good-excellent. Significantly better color fastness was obtained in case of leather samples premordanted with aloe vera. This study leads to the conclusion that dye extracted from bark of Cassia singueana can be used as colorant for tanned leather with the selected natural mordants.

  10. The influence of Chromium supplied by tanning and wet finishing processes on the formation of cr(vi in leather

    Directory of Open Access Journals (Sweden)

    W. F. Fuck

    2011-06-01

    Full Text Available Chromium used in leather manufacturing can be oxidized from the trivalent to the hexavalent state, causing environmental concerns. In this study, the influence of Cr(III from tanning, deacidification pH, fatliquors, chrome retanning and vegetable retanning on the formation of Cr(VI in leather was analyzed by comparing natural and aged samples. In wet-blue leather, even after aging and in fatliquored leathers that did not suffer the aging process, the presence of Cr(VI was always below the detection limit of 3 mg/kg. Considering the presence of Cr(VI, the supply of chromium during the retanning step had a more significant effect than during the tanning. In the fatliquoring process with sulfites, fish and synthetic fatliquor leather samples contained Cr(VI when aged, and the highest concentration detected was 26.7 mg/kg. The evaluation of Cr(VI formation led to recommendations for regulation in the leather industry.

  11. Atomic resolution investigations of phase transformation from TaN to CrTaN in a steel matrix

    DEFF Research Database (Denmark)

    Danielsen, Hilmar Kjartansson; Hald, John

    2012-01-01

    strength of the steel. The Cr content promotes Z-phase precipitation, making MN strengthening of these materials unfeasible, since 12%Cr is necessary for oxidation resistance. The authors have suggested an acceleration of Z-phase precipitation to obtain a fine and stable distribution of CrMN instead of MN...... atoms diffuse from the steel matrix into TaN precipitates and physically transform them into CrTaN. The crystal structure of the precipitates changes from that of a typical MN NaCl type crystal structure to a Z-phase crystal structure with alternating double layers of Cr and TaN. Since there is a large......In development of 12%Cr high temperature steels used for fossil fired power plants, the precipitation of large Z-phase particles, CrMN, has been identified as a major problem since they replace small and finely distributed MN particles. This causes a premature breakdown in the longterm creep...

  12. [Study on Hexagonal Super-Lattice Pattern with Light Spot and Dim Spot in Dielectric Barrier Discharge by Optical Emission Spectra].

    Science.gov (United States)

    Liu, Ying; Dong, Li-fang; Niu, Xue-jiao; Zhang, Chao

    2016-02-01

    The hexagonal super-lattice pattern composed of the light spot and the dim spot is firstly observed and investigated in the discharge of gas mixture of air and argon by using the dielectric barrier discharge device with double water electrodes. It is found that the dim spot is located at the center of its surrounding three light spots by observing the discharge image. Obviously, the brightness of the light spot and the dim spot are different, which indicates that the plasma states of the light spot and the dim spot may be different. The optical emission spectrum method is used to further study the several plasma parameters of the light spot and the dim spot in different argon content. The emission spectra of the N₂ second positive band (C³IIu --> B³IIg) are measured, from which the molecule vibration temperatures of the light spot and the dim spot are calculated. Based on the relative intensity ratio of the line at 391.4 nm and the N₂ line at 394.1 nm, the average electron energies of the light spot and the dim spot are investigated. The broadening of spectral line 696.57 nm (2P₂-1S₅) is used to study the electron densities of the light spot and the dim spot. The experiment shows that the molecule vibration temperature, average electron energy and the electron density of the dim spot are higher than those of the light spot in the same argon content. The molecule vibration temperature and electron density of the light spot and dim spot increase with the argon content increasing from 70% to 95%, while average electron energies of the light spot and dim spot decrease gradually. The short-exposure image recorded by a high speed video camera shows that the dim spot results from the surface discharges (SDs). The surface discharge induced by the volume discharge (VD) has the decisive effect on the formation of the dim spot. The experiment above plays an important role in studying the formation mechanism of the hexagonal super-lattice pattern with light spot and

  13. Metallography of Battery Resistance Spot Welds

    Science.gov (United States)

    Martinez, J. E.; Johannes, L. B.; Gonzalez, D.; Yayathi, S.; Figuered, J. M.; Darcy, E. C.; Bilc, Z. M.

    2015-01-01

    Li-ion cells provide an energy dense solution for systems that require rechargeable electrical power. However, these cells can undergo thermal runaway, the point at which the cell becomes thermally unstable and results in hot gas, flame, electrolyte leakage, and in some cases explosion. The heat and fire associated with this type of event is generally violent and can subsequently cause damage to the surrounding system or present a dangerous risk to the personnel nearby. The space flight environment is especially sensitive to risks particularly when it involves potential for fire within the habitable volume of the International Space Station (ISS). In larger battery packs such as Robonaut 2 (R2), numerous Li-ion cells are placed in parallel-series configurations to obtain the required stack voltage and desired run-time or to meet specific power requirements. This raises a second and less obvious concern for batteries that undergo certification for space flight use: the joining quality at the resistance spot weld of battery cells to component wires/leads and battery tabs, bus bars or other electronic components and assemblies. Resistance spot welds undergo materials evaluation, visual inspection, conductivity (resistivity) testing, destructive peel testing, and metallurgical examination in accordance with applicable NASA Process Specifications. Welded components are cross-sectioned to ensure they are free of cracks or voids open to any exterior surface. Pore and voids contained within the weld zone but not open to an exterior surface, and are not determined to have sharp notch like characteristics, shall be acceptable. Depending on requirements, some battery cells are constructed of aluminum canisters while others are constructed of steel. Process specific weld schedules must be developed and certified for each possible joining combination. The aluminum canisters' positive terminals were particularly difficult to weld due to a bi-metal strip that comes ultrasonically

  14. Blind spot monitoring in light vehicles -- system performance.

    Science.gov (United States)

    2014-07-01

    This report summarizes findings of a small population study of blind spot monitoring systems (BSM) installed by : original vehicle manufacturers on standard production vehicles. The primary goals of these tests were to simulate real-world driving sce...

  15. Analysis and validation of laser spot weld-induced distortion

    Energy Technology Data Exchange (ETDEWEB)

    Knorovsky, G.A.; Kanouff, M.P.; Maccallum, D.O.; Fuerschbach, P.W.

    1999-12-09

    Laser spot welding is an ideal process for joining small parts with tight tolerances on weld size, location, and distortion, particularly those with near-by heat sensitive features. It is also key to understanding the overlapping laser spot seam welding process. Rather than attempting to simulate the laser beam-to-part coupling (particularly if a keyhole occurs), it was measured by calorimetry. This data was then used to calculate the thermal and structural response of a laser spot welded SS304 disk using the finite element method. Five combinations of process parameter values were studied. Calculations were compared to experimental data for temperature and distortion profiles measured by thermocouples and surface profiling. Results are discussed in terms of experimental and modeling factors. The authors then suggest appropriate parameters for laser spot welding.

  16. Spot-Welding Gun With Adjustable Pneumatic Spring

    Science.gov (United States)

    Burley, Richard K.

    1990-01-01

    Proposed spot-welding gun equipped with pneumatic spring, which could be bellows or piston and cylinder, exerts force independent of position along stroke. Applies accurate controlled force to joint welded, without precise positioning at critical position within stroke.

  17. Comparison of hot spot stress evaluation methods for welded structures

    Directory of Open Access Journals (Sweden)

    Jae-Myung Lee

    2010-12-01

    Full Text Available In this paper, different evaluation methods of Hot Spot Stresses (HSS have been applied to four different welded structure details in order to compare them and to illustrate their differences. The HSSs at failure-critical locations were calculated by means of a series of finite element analyses. There was good overall agreement between calculated and experimentally determined HSS on the critical locations. While different methods and procedures exist for the computation of the structural hot-spot stress at welded joints, the recommendations within the International Institute of Welding (IIW guideline concerning the ‘Hot Spot Stress’ approach were found to give good reference stress approximations for fatigue-loaded welded joints. This paper recommends and suggests an appropriate finite element modeling and hot spot stress evaluation technique based on round-robin stress analyses and experimental results of several welded structure details.

  18. NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  19. NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals...

  20. Characterization of a tailless white spot syndrome virus from ...

    African Journals Online (AJOL)

    WSSV) but without tail-like extension was identified and characterized from diseased Penaeus vannamei and moribund Procambarus clarkia. Contrary to previous reports, white spots were not observed on the carapace of the diseased P.

  1. Gnomonia canker, shoot blight, and leaf spot of yellow birch.

    Science.gov (United States)

    Kenneth J. Jr. Kessler

    1978-01-01

    Describes a canker, shoot blight, and leaf spot disease of yellow birch seedlings in the northern Great Lakes region and tells how and when trees become infected by the fungal causal agent, Gnomonia setacea.

  2. Performance evaluation of spot detection algorithms in fluorescence microscopy images

    CSIR Research Space (South Africa)

    Mabaso, M

    2012-10-01

    Full Text Available Detection of messenger Ribonucleic Acid (mRNA) spots in fluorescence microscopy images is of great importance for biologists seeking better understanding of cell functionality. Fluorescence microscopy and specific staining methods make biological...

  3. Classification of Parking Spots Using Multilayer Perceptron Networks

    Directory of Open Access Journals (Sweden)

    FALCAO, H. S.

    2013-12-01

    Full Text Available This project intends to develop a prototype for the identification of free spots in open air parking area where there is a good aerial view without obstacles, allowing for the identification of occupied and free spots. We used image processing techniques and pattern recognition using Artificial Neural Networks (ANN. In order to help implement the prototype, we used Matlab. In order to simulate the parking area, we created a model so that we could acquire the images using a webcam, process them, train the neural network, classify the spots and finally, show the results. The results show that it is viable to apply pattern recognition through image capture to classify parking spots

  4. Pregnancy Complications: Bleeding and Spotting from the Vagina

    Science.gov (United States)

    ... miscarry have bleeding or spotting before the miscarriage. Ectopic pregnancy. This is when a fertilized egg implants itself ... of the uterus and begins to grow. An ectopic pregnancy cannot result in the birth of a baby. ...

  5. IMRT fluence map editing to control hot and cold spots

    International Nuclear Information System (INIS)

    Taylor Cook, J.; Tobler, Matt; Leavitt, Dennis D.; Watson, Gordon

    2005-01-01

    Manually editing intensity-modulated radiation therapy (IMRT) fluence maps effectively controls hot and cold spots that the IMRT optimization cannot control. Many times, re-optimizing does not reduce the hot spots or increase the cold spots. In fact, re-optimizing only places the hot and cold spots in different locations. Fluence-map editing provides manual control of dose delivery and provides the best treatment plan possible. Several IMRT treatments were planned using the Varian Eclipse planning system. We compare the effects on dose distributions between fluence-map editing and re-optimization, discuss techniques for fluence-map editing, and analyze differences between fluence editing on one beam vs. multiple beams. When editing a beam's fluence map, it is essential to choose a beam that least affects dose to the tumor and critical structures. Editing fluence maps gives an advantage in treatment planning and provides controlled delivery of IMRT dose

  6. Transportation conformity particulate matter hot-spot air quality modeling.

    Science.gov (United States)

    2013-07-01

    In light of the new development in particulate matter (PM) hot-spot regulations and Illinois Department : of Transportation (IDOT)s National Environmental Policy Act (NEPA) documentation requirements, : this project is intended to (1) perform and ...

  7. NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during...

  8. NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  9. NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Spotted Fever Rickettsiosis to Syphilis - 2016. In this Table, provisional* cases of selected† notifiable diseases (≥1,000 cases reported during...

  10. Spot table - RPD | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available ended gel image of the spot. Mass Spectrometry Accession No. Accession No. of homologous protein by Mascot Analysis. Mass Spectrometr...y Homologous Protein Definition of homologous protein by Mascot Analysis. Mass Spectrometry

  11. Fungicide efficacy in peach rusty spot control in Serbia

    OpenAIRE

    Dolovac Nenad; Miletić Novica; Aleksić Goran; Savić Dušan; Živković Svetlana; Trkulja Nenad; Bulajić Aleksandra

    2010-01-01

    Rusty Spot has long been known as a harmful peach disease in many parts of the world. During the past several years, rusty spot infection of the late-maturing peach cultivars (Summerset, Suncrest, Fayette and O’Henry) caused significant yield losses in Serbia. Although the etiology of the disease is still unknown, there are numerous studies attempting to set a strategy for its control and recommend appropriate chemical and other peach protection methods. Ho...

  12. FOTS: Fast Oriented Text Spotting with a Unified Network

    OpenAIRE

    Liu, Xuebo; Liang, Ding; Yan, Shi; Chen, Dagui; Qiao, Yu; Yan, Junjie

    2018-01-01

    Incidental scene text spotting is considered one of the most difficult and valuable challenges in the document analysis community. Most existing methods treat text detection and recognition as separate tasks. In this work, we propose a unified end-to-end trainable Fast Oriented Text Spotting (FOTS) network for simultaneous detection and recognition, sharing computation and visual information among the two complementary tasks. Specially, RoIRotate is introduced to share convolutional features ...

  13. Subtle Motion Analysis and Spotting using the Riesz Pyramid

    OpenAIRE

    Arango, Carlos,; Alata, Olivier; Emonet, Rémi; Legrand, Anne-Claire; Konik, Hubert

    2018-01-01

    International audience; Analyzing and temporally spotting motions which are almost invisible to the human eye might reveal interesting information about the world. However, detecting these events is difficult due to their short duration and low intensities. Taking inspiration from video magnification techniques, we design a workflow for analyzing and temporally spotting subtle motions based on the Riesz pyramid. In addition, we propose a filtering and masking scheme that segments motions of i...

  14. Resistance Spot Welding with Middelfrequency-Inverter Weling Gun

    DEFF Research Database (Denmark)

    Rasmussen, Mogens H.

    The paper presents the results of investigations concerning the process stability and weldability lobes for uncoated sheets of 1.0 mm thickness when performing resistance spot welding with a middlefrequency-inverter welding gun......The paper presents the results of investigations concerning the process stability and weldability lobes for uncoated sheets of 1.0 mm thickness when performing resistance spot welding with a middlefrequency-inverter welding gun...

  15. Complete mitochondrial DNA sequence of the Qianshao spotted pig.

    Science.gov (United States)

    Xu, Dong; Chai, Yu-Lan; Jiang, Juan; He, Chang-Qing; Ma, Hai-Ming

    2015-01-01

    The complete mitochondrial genome sequence of Qianshao spotted pig was first determined in this study. The mitogenome (16,700 bp) consists of 22 tRNA genes, 2 ribosomal RNA genes, 13 protein-coding genes and 1 control region (D-loop region). The complete mitochondrial genome sequence of the Qianshao spotted pig enriches data resource for further study in genetic mechanism.

  16. Onset of breakdown and formation of cathode spots

    International Nuclear Information System (INIS)

    Schwirzke, F.; Hallal, M.P. Jr.; Maruyama, X.K.

    1992-01-01

    The initial phase of onset of electrical breakdown in a vacuum discharge is characterized by very rapid ionization of surface material which leads to a kind of ''explosive'' plasma formation on electrodes. As an increasing electric field is applied between the two electrodes of vacuum diode the ionization process is initiated by field emission of electrons from highly localized spots on the cathode surface. Despite the fundamental importance of cathode spots for the breakdown process, the structure of cathode spots and the fast ionization rates of surface layers were riot fully understood. Besides joule heating of the field emitting spot, the electrons also desorb contaminants and ionize some of the released neutrals. Ions produced a short distance (∼ 1μm) from the spot are accelerated back towards the cathode. This ion bombardment leads to surface heating of the spot. Calculations of the power deposition show that ion surface heating is initially orders of magnitude larger than joule heating. Ion bombardment is especially important at low initial current densities since it leads efficiently to further desorption arid sputtering of neutrals from the surface and hence increases the neutral density which in turn increases the ionization rate. As more ions are produced, a positive space charge layer forms which enhances the electric field and thus strongly enhances the field emitted electron current. Surface heating and the build-up of positive space charge rapidly lead to further enhanced field emission and finally thermionic electron emission. The localized build-up plasma above the electron emitting spot naturally leads to pressure and electric field distributions which ignite unipolar arcs. The large electron current of the unipolar arc and large ion sputtering rates cause the ''explosion'' of surface material into the dense plasma of a cathode spot

  17. On the burn topology of hot-spot-initiated reactions

    Energy Technology Data Exchange (ETDEWEB)

    Hill, Larry G [Los Alamos National Laboratory; Zimmermann, Bjorn [WOLFRAM RESEARCH INC.; Nichols, Albert L [LLNL

    2009-01-01

    We determine the reaction progress function for an ideal hot spot model problem. The considered problem has an exact analytic solution that can derived from a reduction of Nichols statistical hot spot model. We perform numerical calculations to verify the analytic solution and to illustrate the error realized in real, finite systems. We show how the baseline problem, which does not distinguish between the reactant and product densities, can be scaled to handle general cases for which the two densities differ.

  18. Damage tolerance reliability analysis of automotive spot-welded joints

    International Nuclear Information System (INIS)

    Mahadevan, Sankaran; Ni Kan

    2003-01-01

    This paper develops a damage tolerance reliability analysis methodology for automotive spot-welded joints under multi-axial and variable amplitude loading history. The total fatigue life of a spot weld is divided into two parts, crack initiation and crack propagation. The multi-axial loading history is obtained from transient response finite element analysis of a vehicle model. A three-dimensional finite element model of a simplified joint with four spot welds is developed for static stress/strain analysis. A probabilistic Miner's rule is combined with a randomized strain-life curve family and the stress/strain analysis result to develop a strain-based probabilistic fatigue crack initiation life prediction for spot welds. Afterwards, the fatigue crack inside the base material sheet is modeled as a surface crack. Then a probabilistic crack growth model is combined with the stress analysis result to develop a probabilistic fatigue crack growth life prediction for spot welds. Both methods are implemented with MSC/NASTRAN and MSC/FATIGUE software, and are useful for reliability assessment of automotive spot-welded joints against fatigue and fracture

  19. Spot market activity remains weak as prices continue to fall

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    A summary of financial data for the uranium spot market in November 1996 is provided. Price ranges for the restricted and unrestricted markets, conversion, and separative work are listed, and total market volume and new contracts are noted. Transactions made are briefly described. Deals made and pending in the spot concentrates, medium and long-term, conversion, and markets are listed for U.S. and non-U.S. buyers. Spot market activity increased in November with just over 1.0 million lbs of U3O8 equivalent being transacted compared to October's total of 530,000 lbs of U3O8 equivalent. The restricted uranium spot market price range slipped from $15.50-$15.70/lb U3O8 last month to $14.85/lb - $15.25/lb U3O8 this month. The unrestricted uranium spot market price range also slipped to $14.85/lb - $15.00/lb this month from $15.00/lb - $15.45/lb in October. Spot prices for conversion and separative work units remained at their October levels

  20. Cognitive sophistication does not attenuate the bias blind spot.

    Science.gov (United States)

    West, Richard F; Meserve, Russell J; Stanovich, Keith E

    2012-09-01

    The so-called bias blind spot arises when people report that thinking biases are more prevalent in others than in themselves. Bias turns out to be relatively easy to recognize in the behaviors of others, but often difficult to detect in one's own judgments. Most previous research on the bias blind spot has focused on bias in the social domain. In 2 studies, we found replicable bias blind spots with respect to many of the classic cognitive biases studied in the heuristics and biases literature (e.g., Tversky & Kahneman, 1974). Further, we found that none of these bias blind spots were attenuated by measures of cognitive sophistication such as cognitive ability or thinking dispositions related to bias. If anything, a larger bias blind spot was associated with higher cognitive ability. Additional analyses indicated that being free of the bias blind spot does not help a person avoid the actual classic cognitive biases. We discuss these findings in terms of a generic dual-process theory of cognition.

  1. A method for short term electricity spot price forecasting

    International Nuclear Information System (INIS)

    Koreneff, G.; Seppaelae, A.; Lehtonen, M.; Kekkonen, V.; Laitinen, E.; Haekli, J.; Antila, E.

    1998-01-01

    In Finland, the electricity market was de-regulated in November 1995. For the electricity purchase of power companies this has caused big changes, since the old tariff based contracts of bulk power supply have been replaced by negotiated bilateral short term contracts and by power purchase from the spot market. In the spot market, in turn, there are at the present two strong actors: The electricity exchange of Finland and the Nordic power pool which is run by the Swedish and Norwegian companies. Today, the power companies in Finland have short term trade with both of the electricity exchanges. The aim of this chapter is to present methods for spot price forecasting in the electricity exchange. The main focus is given to the Finnish circumstances. In the beginning of the presentation, the practices of the electricity exchange of Finland are described, and a brief presentation is given on the different contracts, or electricity products, available in the spot market. For comparison, the practices of the Nordic electricity exchange are also outlined. A time series technique for spot price forecasting is presented. The structure of the model is presented, and its validity is tested using real case data obtained from the Finnish power market. The spot price forecasting model is a part of a computer system for distribution energy management (DEM) in a de-regulated power market

  2. A method for short term electricity spot price forecasting

    Energy Technology Data Exchange (ETDEWEB)

    Koreneff, G.; Seppaelae, A.; Lehtonen, M.; Kekkonen, V. [VTT Energy, Espoo (Finland); Laitinen, E.; Haekli, J. [Vaasa Univ. (Finland); Antila, E. [ABB Transmit Oy (Finland)

    1998-08-01

    In Finland, the electricity market was de-regulated in November 1995. For the electricity purchase of power companies this has caused big changes, since the old tariff based contracts of bulk power supply have been replaced by negotiated bilateral short term contracts and by power purchase from the spot market. In the spot market, in turn, there are at the present two strong actors: The electricity exchange of Finland and the Nordic power pool which is run by the Swedish and Norwegian companies. Today, the power companies in Finland have short term trade with both of the electricity exchanges. The aim of this chapter is to present methods for spot price forecasting in the electricity exchange. The main focus is given to the Finnish circumstances. In the beginning of the presentation, the practices of the electricity exchange of Finland are described, and a brief presentation is given on the different contracts, or electricity products, available in the spot market. For comparison, the practices of the Nordic electricity exchange are also outlined. A time series technique for spot price forecasting is presented. The structure of the model is presented, and its validity is tested using real case data obtained from the Finnish power market. The spot price forecasting model is a part of a computer system for distribution energy management (DEM) in a de-regulated power market

  3. Duodenal White Spots Mimicking Intestinal Candidiasis: Report of Case

    Directory of Open Access Journals (Sweden)

    Ozgur Turk

    2015-12-01

    Full Text Available Duodenal white spots are mentioned in these nonspecific lesions until recently. Although there is not enough studies about duedonal white spots yet; these lesions described in a separate syndrome. Here now we reported a case that we diagnosed multiple Duodenal white spots mimicking intestinal candidiasis. Clinical manifestation and endoscopic appearance of lesions gave rise to thought intestinal candidiasis histopathological examination revealed us several duodenitis. There was no evidence of fungal infection in PAS staining. Early after endoscopy patient took treatment of Lansoprozole at the 30 mg dose and bismuth salicylate. Patients compliant declined and control endoscopy exposed white duodenal spots cleared away three months later. Duodenal white spots are becoming to be designated as a separate disease even a syndrome. Etiology of duodenal white spots must be determined carefully during endoscopy. Sometimes it is difficult to make the correct diagnosis by appearance of lesion; in such cases histopathological examination can be useful both differential diagnosis of disease and determination of etiological factor. [J Contemp Med 2015; 5(4.000: 249-252

  4. Spot14/Spot14R expression may be involved in MSC adipogenic differentiation in patients with adolescent idiopathic scoliosis

    Science.gov (United States)

    WANG, QIFEI; YANG, JUNLIN; LIN, XIANG; HUANG, ZIFANG; XIE, CHAOFAN; FAN, HENGWEI

    2016-01-01

    The aim of the present study was to evaluate the different expression levels of thyroid hormone responsive (THRSP; Spot14)/S14 related, Mig12 (S14R) during bone marrow mesenchymal stem cell (BM-MSC) adipogenesis in adolescent idiopathic scoliosis (AIS) patients. MSCs were retrospectively isolated from AIS patients and controls, and adipogenic differentiation was induced. Total RNA was extracted for Affymetrix 3′-IVT expression profiling microarrays and compared with the results from healthy controls. The results were confirmed by semiquantitative reverse transcription-polymerase chain reaction (RT-PCR) validation and the protein expression levels of Spot14 and its paralogous gene S14R by western blotting and immunohistochemistry. A total of 300 significantly altered mRNAs were detected (111 upregulated and 189 downregulated) and confirmed by RT-qPCR. The mRNA expression levels of seven genes, including Spot14, were altered by >2-fold in AIS patients. Spot14/S14R was selected for further investigation. The results of the western blotting demonstrated that mRNA and protein expression levels of Spot14/S14R were significantly higher in AIS patients than the controls (P<0.05). Immunohistochemistry demonstrated Spot14 was expressed in 85% (17/20 cases) in adipose tissue samples from AIS patients and 23.1% (3/13 cases) of adipose tissue samples from controls. The positive ratio of Spot14 in adipose tissue samples from AIS was significantly higher than the controls (P<0.001). The results of the present study indicated that Spot14/S14R were differently expressed in MSC adipogenesis in AIS patients, and they may be important in the abnormal adipogenic differentiation in AIS. PMID:27082501

  5. Spot-scanning beam delivery with laterally- and longitudinally-mixed spot size pencil beams in heavy ion radiotherapy

    Science.gov (United States)

    Yan, Yuan-Lin; Liu, Xin-Guo; Dai, Zhong-Ying; Ma, Yuan-Yuan; He, Peng-Bo; Shen, Guo-Sheng; Ji, Teng-Fei; Zhang, Hui; Li, Qiang

    2017-09-01

    The three-dimensional (3D) spot-scanning method is one of the most commonly used irradiation methods in charged particle beam radiotherapy. Generally, spot-scanning beam delivery utilizes the same size pencil beam to irradiate the tumor targets. Here we propose a spot-scanning beam delivery method with laterally- and longitudinally-mixed size pencil beams for heavy ion radiotherapy. This uses pencil beams with a bigger spot size in the lateral direction and wider mini spread-out Bragg peak (mini-SOBP) to irradiate the inner part of a target volume, and pencil beams with a smaller spot size in the lateral direction and narrower mini-SOBP to irradiate the peripheral part of the target volume. Instead of being controlled by the accelerator, the lateral size of the pencil beam was adjusted by inserting Ta scatterers in the beam delivery line. The longitudinal size of the pencil beam (i.e. the width of the mini-SOBP) was adjusted by tilting mini ridge filters along the beam direction. The new spot-scanning beam delivery using carbon ions was investigated theoretically and compared with traditional spot-scanning beam delivery. Our results show that the new spot-scanning beam delivery has smaller lateral penumbra, steeper distal dose fall-off and the dose homogeneity (1-standard deviation/mean) in the target volume is better than 95%. Supported by Key Project of National Natural Science Foundation of China (U1232207), National Key Technology Support Program of the Ministry of Science and Technology of China (2015BAI01B11), National Key Research and Development Program of the Ministry of Science and Technology of China (2016YFC0904602) and National Natural Science Foundation of China (11075191, 11205217, 11475231, 11505249)

  6. Detection of hazardous pollutants in chrome-tanned leather using locally developed laser-induced breakdown spectrometer.

    Science.gov (United States)

    Nasr, M M; Gondal, Mohammed Asharf; Seddigi, Z S

    2011-04-01

    Highly toxic contaminants like Cr, As, and Pb were detected in chrome-tanning process of animal skin to produce leather by applying locally developed laser-induced breakdown spectrometer. An Nd-YAG laser with 1,064 nm wavelength was focused on the surface of leather samples (natural and manufactured) to generate a plasma spark and spectrally resolved spectra were used for identification and quantification of contaminants. The leather samples were collected from a tannery located in industrial cities of Riyadh and Jeddah, Saudi Arabia. The study was carried out on fully, half manufactured (wet blue leather), and natural hide (skin). To the best of our knowledge, this is the first attempt where laser-induced breakdown spectroscopy (LIBS) technique has been applied for the analysis of leather before and after tanning process. The maximum concentration of different elements of environmental significance like chromium, lead, arsenic, sulfur, magnesium were 199, 289, 31, 38, and 39 ppm, respectively, in one of the manufactured leather samples. The limit of detection (LOD) of our LIBS system for chromium, lead, arsenic, sulfur, and magnesium were 2, 3, 1.5,7, and 3 ppm, respectively. The safe permissible limit for tanned leather for highly toxic elements like chromium, lead, and arsenic are 1, 0.5, 0.01 ppm, respectively, as prescribed in Environmental Regulation Standards for Saudi Industries set by Royal Commission Jubail, Saudi Arabia. The LIBS technique is superior to other conventional techniques like ICP or atomic absorption that a little or no sample preparation is required, no chemicals are needed, multi-elemental analysis is possible for all kinds of samples (natural and anthropogenic materials), microgram of sample is essential, and LIBS could be applied for remote analysis. It is highly selective and sensitivity higher than ICP, and as no sample and chemicals are required, it is cost effective for multi-sample analysis per unit time as compared with other

  7. Bridging scale gaps between regional maps of forest aboveground biomass and field sampling plots using TanDEM-X data

    Science.gov (United States)

    Ni, W.; Zhang, Z.; Sun, G.

    2017-12-01

    Several large-scale maps of forest AGB have been released [1] [2] [3]. However, these existing global or regional datasets were only approximations based on combining land cover type and representative values instead of measurements of actual forest aboveground biomass or forest heights [4]. Rodríguez-Veiga et al[5] reported obvious discrepancies of existing forest biomass stock maps with in-situ observations in Mexico. One of the biggest challenges to the credibility of these maps comes from the scale gaps between the size of field sampling plots used to develop(or validate) estimation models and the pixel size of these maps and the availability of field sampling plots with sufficient size for the verification of these products [6]. It is time-consuming and labor-intensive to collect sufficient number of field sampling data over the plot size of the same as resolutions of regional maps. The smaller field sampling plots cannot fully represent the spatial heterogeneity of forest stands as shown in Figure 1. Forest AGB is directly determined by forest heights, diameter at breast height (DBH) of each tree, forest density and tree species. What measured in the field sampling are the geometrical characteristics of forest stands including the DBH, tree heights and forest densities. The LiDAR data is considered as the best dataset for the estimation of forest AGB. The main reason is that LiDAR can directly capture geometrical features of forest stands by its range detection capabilities.The remotely sensed dataset, which is capable of direct measurements of forest spatial structures, may serve as a ladder to bridge the scale gaps between the pixel size of regional maps of forest AGB and field sampling plots. Several researches report that TanDEM-X data can be used to characterize the forest spatial structures [7, 8]. In this study, the forest AGB map of northeast China were produced using ALOS/PALSAR data taking TanDEM-X data as a bridges. The TanDEM-X InSAR data used in

  8. 7 CFR 27.96 - Quotations in bona fide spot markets.

    Science.gov (United States)

    2010-01-01

    ... determined by the sale of spot cotton in such spot market. Quotations shall be determined and maintained in each designated spot market by the Cotton Division, Agricultural Marketing Service, USDA, as follows... 7 Agriculture 2 2010-01-01 2010-01-01 false Quotations in bona fide spot markets. 27.96 Section 27...

  9. 7 CFR 27.94 - Spot markets for contract settlement purposes.

    Science.gov (United States)

    2010-01-01

    ... CONTAINER REGULATIONS COTTON CLASSIFICATION UNDER COTTON FUTURES LEGISLATION Regulations Spot Markets § 27.94 Spot markets for contract settlement purposes. The following are designated as spot markets for... 7 Agriculture 2 2010-01-01 2010-01-01 false Spot markets for contract settlement purposes. 27.94...

  10. 7 CFR 28.416 - Strict Good Ordinary Light Spotted Color.

    Science.gov (United States)

    2010-01-01

    ... CONTAINER REGULATIONS COTTON CLASSING, TESTING, AND STANDARDS Standards Light Spotted Cotton § 28.416 Strict Good Ordinary Light Spotted Color. Strict Good Ordinary Light Spotted Color is color which in spot or... Cotton Source: 57 FR 34498, Aug. 5, 1992, unless otherwise noted. ...

  11. First Beam Test of Nanometer Spot Size Monitor Using Laser Interferometry

    CERN Document Server

    Walz, D

    2003-01-01

    The nanometer spot size monitor based on the laser interferometry (Laser-Compton Spot Size Monitor) has been tested in FFTB beam line at SLAC. A low emittance beam of 46 GeV electrons, provided by the two-mile linear accelerator, was focused into nanometer spot in the FFTB line, and its transverse dimensions were precisely measured by the spot size monitor.

  12. Seasonal change in nutrient composition of spotted knapweed and preference by sheep

    Science.gov (United States)

    Amy C. Ganguli; Michael B. Hale; Karen L. Launchbaugh

    2010-01-01

    Spotted knapweed (Centaurea stoebe ssp. micranthos) is one of the most troublesome rangeland weeds in western North America. As part of a larger investigation evaluating the use of targeted sheep grazing to control spotted knapweed, we examined sheep preference and forage quality of dried spotted knapweed in different phenological stages. We collected spotted knapweed...

  13. Welding of Low Alloy Steel DIN 15Mo3 by MIG/MAG Spot

    OpenAIRE

    Nabeel K. Abid Al- Sahib

    2006-01-01

    ????? ????? ????? ????? ??????? ?????? ?? ????? ?????? ?????? ?????? ??????? ?????? ?????? (MIG/MAG spot) ???????? ??? ??????? ????? ?? ???? ???????? ????? ??? ???????? ?? ?????? ??????????? ??????? ???????? ????? ???? ??????? ??????? ????? ??? (DIN15Mo3) ?????? ?????? ?????? ?????? ?????? ?? ???? ???? ?????? ???????" ??? ?????? ??? ????. ????? ??????? ??????? ?????? ??? CO2 ????" ?? ??? ??????? ?? ???? ??????? ??????? ????? ?? ?????? ????? ?? ??? ???? ?? ????? (13%) ???? (4mm) ???? (2sec). ?...

  14. Vocal complexity and sociality in spotted paca (Cuniculus paca)

    Science.gov (United States)

    2018-01-01

    The evolution of sociality is related to many ecological factors that act on animals as selective forces, thus driving the formation of groups. Group size will depend on the payoffs of group living. The Social Complexity Hypothesis for Communication (SCHC) predicts that increases in group size will be related to increases in the complexity of the communication among individuals. This hypothesis, which was confirmed in some mammal societies, may be useful to trace sociality in the spotted paca (Cuniculus paca), a Neotropical caviomorph rodent reported as solitary. There are, however, sightings of groups in the wild, and farmers easily form groups of spotted paca in captivity. Thus, we aimed to describe the acoustic repertoire of captive spotted paca to test the SCHC and to obtain insights about the sociability of this species. Moreover, we aimed to verify the relationship between group size and acoustic repertoire size of caviomorph rodents, to better understand the evolution of sociality in this taxon. We predicted that spotted paca should display a complex acoustic repertoire, given their social behavior in captivity and group sightings in the wild. We also predicted that in caviomorph species the group size would increase with acoustic repertoire, supporting the SCHC. We performed a Linear Discriminant Analysis (LDA) based on acoustic parameters of the vocalizations recorded. In addition, we applied an independent contrasts approach to investigate sociality in spotted paca following the social complexity hypothesis, independent of phylogeny. Our analysis showed that the spotted paca’s acoustic repertoire contains seven vocal types and one mechanical signal. The broad acoustic repertoire of the spotted paca might have evolved given the species’ ability to live in groups. The relationship between group size and the size of the acoustic repertoires of caviomorph species was confirmed, providing additional support for the SCHC in yet another group of diverse

  15. Poultry feed based on protein hydrolysate derived from chrome-tanned leather solid waste: creating value from waste.

    Science.gov (United States)

    Chaudhary, Rubina; Pati, Anupama

    2016-04-01

    Leather industry generates huge amount of chrome-containing leather solid waste which creates major environment problems to tanners worldwide. Chrome-tanned leather solid waste is primarily chromium complex of collagen protein. The presence of chromium limits its protein application in animal feed industry. The purified protein hydrolysate with zero chromium could be used in poultry feed. In this study, an attempt has been made to assess performance of poultry with purified protein hydrolysate as a feed derived from chrome-tanned leather waste as partial replacement of soyabean meal as a sole source of protein for growing broiler chickens. Growth study was conducted to evaluate the effect of feeding protein hydrolysate on performance and physiochemical characteristics of meat of broiler chickens. Two experimental diets containing various levels of protein hydrolysate (EI-20 % and EII-30 %) were evaluated. The comparative study was performed as control with soyabean meal. Daily feed intake, body weight gain and feed conversion ratio were measured from day 8 to day 35. At the end of the study, birds were randomly selected and slaughtered to evaluate for physiochemical characteristics of meat. Diet had significant effects on feed intake and body weight gain. Birds fed with 20 and 30 % protein hydrolysate consumed 9.5 and 17.5 % higher amount of feed and gained 6.5 and 16.6 % higher than soyabean meal-fed birds. The current study produced evidence that protein hydrolysate can replace up to 75 % of soyabean meal in broiler diets without affecting either growth performance or meat characteristics.

  16. Pollution characteristics and influencing factors of atmospheric particulate matter (PM2.5) in Chang-Zhu-Tan area

    Science.gov (United States)

    Zhang, Yong; Jiang, Wulin

    2018-01-01

    Using the same time data of PM2.5 concentration and meteorology from May 1st to May 31st in 2013 in Chang-Zhu-Tan area. This paper analyses the variation characteristics of PM2.5 concentration and the correlations between the variation characteristics and meteorological factors. In view of time, the results showed that the 24-h PM2.5 concentration varied with the two peaks and two valleys styles in Chang-Zhu-Tan area. And the daily PM2.5 concentration tends to the instability and great variation characteristics with the multi-peaks and multi-valleys style. In view of space, PM2.5 concentration values of the three cities from high to low are Zhuzhou>Xiangtan>Changsha. For cities and suburbs, PM2.5 concentration values of central towns are greater than that of the suburbs in Changsha and Xiangtan; however, the PM2.5 concentration values of the central town in Zhuzhou are slightly lower than the suburbs. At the same time, the correlation analysis between PM2.5 concentration and meteorological factors showed that the correlation from high to low was the relative air humidity>soil temperature>air temperature>soil humidity> wind velocity>rainfall. Among the above meteorological factors, wind velocity, rainfall, air temperature, soil temperature and soil humidity are negatively correlated with PM2.5 concentration, but the relationship between relative air humidity and PM2.5 concentration is a positive correlation.

  17. Modelling above Ground Biomass in Tanzanian Miombo Woodlands Using TanDEM-X WorldDEM and Field Data

    Directory of Open Access Journals (Sweden)

    Stefano Puliti

    2017-09-01

    Full Text Available The use of Interferometric Synthetic Aperture Radar (InSAR data has great potential for monitoring large scale forest above ground biomass (AGB in the tropics due to the increased ability to retrieve 3D information even under cloud cover. To date; results in tropical forests have been inconsistent and further knowledge on the accuracy of models linking AGB and InSAR height data is crucial for the development of large scale forest monitoring programs. This study provides an example of the use of TanDEM-X WorldDEM data to model AGB in Tanzanian woodlands. The primary objective was to assess the accuracy of a model linking AGB with InSAR height from WorldDEM after the subtraction of ground heights. The secondary objective was to assess the possibility of obtaining InSAR height for field plots when the terrain heights were derived from global navigation satellite systems (GNSS; i.e., as an alternative to using airborne laser scanning (ALS. The results revealed that the AGB model using InSAR height had a predictive accuracy of R M S E = 24.1 t·ha−1; or 38.8% of the mean AGB when terrain heights were derived from ALS. The results were similar when using terrain heights from GNSS. The accuracy of the predicted AGB was improved when compared to a previous study using TanDEM-X for a sub-area of the area of interest and was of similar magnitude to what was achieved in the same sub-area using ALS data. Overall; this study sheds new light on the opportunities that arise from the use of InSAR data for large scale AGB modelling in tropical woodlands.

  18. To the question on accuracy of forest heights’ measurements by the TanDEM-X radar interferometry data

    Directory of Open Access Journals (Sweden)

    T. N. Chimitdorzhiev

    2016-08-01

    Full Text Available The paper presents the validation results of the InSAR method for determining the forest canopy height, based on TanDEM-X and ALOS PALSAR data. The research conducted on the territory of the Baikal-Kudara forest area of the Republic of Buryatia (52°10'N, 106°48'E. Forest vegetation is represented mainly by conifers – pine, and spruce, with a small admixture of deciduous trees – aspen, birch, etc. The forest vegetation height was determined by subtracting the digital elevation model (DEM of the digital terrain model (DTM. DEM is built according to the L-band (wavelength of 23.5 cm ALOS PALSAR satellite with horizontal co-polarization mode. In the investigation it was assumed that a radar signal of ALOS PALSAR passes all forest thickness and reflected from the underlying surface, made it possible to recover terrain under forest canopy. DTM has been built using the TanDEM-X data (wavelength 3 cm. In this case, it was assumed that the radar echoes scattered from a some virtual phase centers of scattering surface, which characterizes the upper limit of the continuous forest canopy. To check the accuracy of satellite definitions of forest height in study area were made high-precision geodetic measurement of trees heights using electronic total station and the coordinates of geographic control points using differential GPS receivers. The discrepancy between the satellite and ground-based measurements at 11 test sites did not exceed 2 m, which is mainly due to the difference in measurement techniques: height of individual trees by ground methods and continuous forest canopy height using radar interferometry.

  19. Locating the Great Red Spot: Yesterday, Today, and Tomorrow

    Science.gov (United States)

    Lesniak, Michael V.; Stapleton, J. C.

    2014-01-01

    The Great Red Spot, a persistent storm in Jupiter's atmosphere, is the most prominent feature of that planet's disk as viewed from Earth. Combined with the fact that Jupiter is a gas giant planet and has no visible surface with discernible landmarks, this means that following the passage of the Great Red Spot is the primary method of observing the planet's rotation. Therefore, it is paramount for any program which generates synthetic images of the planet to accurately place the feature. The U.S. Naval Observatory's "Apparent Disk of a Solar System Object" online web service (http://aa.usno.navy.mil/data/docs/diskmap.php) is such a program. The Great Red Spot's planetary latitude is locked between two of Jupiter's striated atmospheric layers at 22 °S. However, its planetary longitude is not constant; over time it migrates east and west along the atmospheric layer boundary it is trapped within. Observing and recording its longitude is made difficult because Jupiter's atmosphere is subject to differential rotation and the Great Red Spot slowly migrates with respect to the surrounding atmospheric layers. Furthermore, the Great Red Spot does not move at a uniform rate. Currently its relative motion is approximately 0°.051 per day. Since its first recorded observation in 1831, the Great Red Spot has made almost three complete laps around the planet at the 22nd parallel. "Apparent Disk of a Solar System Object" operates over any requested date between 1700 and 2100 A.D. Therefore, our treatment of the Great Red Spot needs to take into account both historical positions and future predicted motion. Based on researching past observations of the spot's position on the disk, we find that its behavior prior to 2009 is best represented by a 10-part piecewise function. Each component of the piecewise function is a 2nd order polynomial. Observations from 2009-present are better fit with a linear function; this function is used for future years by extrapolation. Using these fits

  20. Antiferromagnetism and hot spots in CeIn3

    Science.gov (United States)

    Grigoriev, Pavel; Gor'kov, Lev

    2006-03-01

    Enormous mass enhancement at ``hot spots'' on the Fermi surface (FS) of the antiferromagnetic CeIn3 has been reported at strong magnetic field near its antiferromagnetic quantum critical point [T. Ebihara et al., Phys. Rev. Lett. 93, 246401 (2004)]. The effect was ascribed to anomalous spin fluctuations at these spots owing to peculiar strong many-body interactions. The ``hot spots'' lie at the positions on FS same as in non-magnetic LaIn3 where the narrow necks are protruded, thus, hinting on their possible relation. Assuming that in paramagnetic phase CeIn3 has similar spectrum, we study the influence of the antiferromagnetic ordering (AFM) on the energy spectrum of CeIn3 and show that its FS undergoes a topological change at the onset of AFM. The necks at the ``hot spots'' are truncated by the AFM, thus restoring the almost spherical d-part of the FS of CeIn3. Applied field suppresses the AFM and restores the necks on the FS (so-called 2.5-order phase transition) leading to logarithmic divergence of the dHvA effective mass when the electron trajectory passes near or through the restored necks. This effect fully explains the observed dHvA mass enhancement in the ``hot spots'' in the frameworks of one-particle approximation and leads to the predictions concerning the spin-dependence of the effective electron mass.

  1. Assessment of Nugget Size of Spot Weld using Neutron Radiography

    Directory of Open Access Journals (Sweden)

    Triyono

    2011-08-01

    Full Text Available Resistance spot welding (RSW has been widely used for many years in the fabrication of car body structures, mainly due to the cost and time considerations. The weld quality as well as the nugget size is an issue in various manufacturing and processes due to the strong link between the weld quality and safety. It has led to the development of various destructive and non-destructive tests for spot welding such as peel testing, ultrasonic inspections, digital shearography, and infrared thermography. However, such methods cannot show spot weld nugget visually and the results are very operator’s skill dependent. The present work proposes a method to visualize the nugget size of spot welds using neutron radiography. Water, oil and various concentrations of gadolinium oxide-alcohol mixture were evaluated as a contrast media to obtain the best quality of radiography. Results show that mixture of 5 g gadolinium oxide (Gd2O3 in 25 ml alcohol produces the best contrast. It provides the possibility to visualize the shape and size of the nugget spot weld. Furthermore, it can discriminate between nugget and corona bond. The result of neutron radiography evaluation shows reasonable agreement with that of destructive test.

  2. LEOPARD syndrome: what are café noir spots?

    Science.gov (United States)

    Rodríguez-Bujaldón, Alfonso; Vazquez-Bayo, Carmen; Jimenez-Puya, Rafael; Galan-Gutierrez, Manuel; Moreno-Gimenez, José; Rodriguez-Garcia, Alfonso; Tercedor, Jesus; Velez-Garcia, Antonio

    2008-01-01

    Lentigines, electrocardiographic abnormalities, ocular hypertelorism, pulmonary stenosis, abnormalities of genitalia, retarded growth, and deafness syndrome (multiple lentigines syndrome) is most often characterized by multiple lentigines and cardiac conduction defects. Café noir spot is a term proposed, by analogy to café au lait spots, for the larger and darkly pigmented patches that are frequently observed in patients with this syndrome. Although presumed by some authors to represent lentigines, the histologic features of café noir spots have not been well documented in the literature. Only two previous cases have been reported in which a biopsy of the café noir spots than melanocytic nevi. We describe the histologic characteristics of seven café noir spots in six patients with lentigines, electrocardiographic abnormalities, ocular hypertelorism, pulmonary stenosis, abnormalities of genitalia, retarded growth, and deafness syndrome. Three lesions represented melanocytic nevi (one with dysplastic features), and four were compatible with lentigo simplex. These findings help our understanding of the histologic spectrum of pigmented lesions in lentigines, electrocardiographic abnormalities, ocular hypertelorism, pulmonary stenosis, abnormalities of genitalia, retarded growth, and deafness syndrome.

  3. Theory and simulation of anode spots in low pressure plasmas

    Science.gov (United States)

    Scheiner, Brett; Barnat, Edward V.; Baalrud, Scott D.; Hopkins, Matthew M.; Yee, Benjamin T.

    2017-11-01

    When electrodes are biased above the plasma potential, electrons accelerated through the associated electron sheath can dramatically increase the ionization rate of neutrals near the electrode surface. It has previously been observed that if the ionization rate is great enough, a double layer separates a luminous high-potential plasma attached to the electrode surface (called an anode spot or fireball) from the bulk plasma. Here, results of the first 2D particle-in-cell simulations of anode spot formation are presented along with a theoretical model describing the formation process. It is found that ionization leads to the build-up of an ion-rich layer adjacent to the electrode, forming a narrow potential well near the electrode surface that traps electrons born from ionization. It is shown that anode spot onset occurs when a quasineutral region is established in the potential well and the density in this region becomes large enough to violate the steady-state Langmuir condition, which is a balance between electron and ion fluxes across the double layer. A model for steady-state properties of the anode spot is also presented, which predicts values for the anode spot size, double layer potential drop, and form of the sheath at the electrode by considering particle, power, and current balance. These predictions are found to be consistent with the presented simulation and previous experiments.

  4. Thermally-Driven Mantle Plumes Reconcile Hot-spot Observations

    Science.gov (United States)

    Davies, D.; Davies, J.

    2008-12-01

    Hot-spots are anomalous regions of magmatism that cannot be directly associated with plate tectonic processes (e.g. Morgan, 1972). They are widely regarded as the surface expression of upwelling mantle plumes. Hot-spots exhibit variable life-spans, magmatic productivity and fixity (e.g. Ito and van Keken, 2007). This suggests that a wide-range of upwelling structures coexist within Earth's mantle, a view supported by geochemical and seismic evidence, but, thus far, not reproduced by numerical models. Here, results from a new, global, 3-D spherical, mantle convection model are presented, which better reconcile hot-spot observations, the key modification from previous models being increased convective vigor. Model upwellings show broad-ranging dynamics; some drift slowly, while others are more mobile, displaying variable life-spans, intensities and migration velocities. Such behavior is consistent with hot-spot observations, indicating that the mantle must be simulated at the correct vigor and in the appropriate geometry to reproduce Earth-like dynamics. Thermally-driven mantle plumes can explain the principal features of hot-spot volcanism on Earth.

  5. Coverage of skin cancer and recreational tanning in North American magazines before and after the landmark 2006 International Agency for Research on Cancer report.

    Science.gov (United States)

    McWhirter, Jennifer E; Hoffman-Goetz, Laurie

    2015-02-21

    Skin cancer is an increasingly important global public health problem. Mass media is a key source of skin cancer information. We examined how media coverage of skin cancer has changed over time as a consequence of the release of a key public health report from the International Agency for Research on Cancer (IARC) in 2006, which linked ultraviolet (UV) radiation from indoor tanning and skin cancer. A directed content analysis of skin cancer and tanning coverage in 29 popular North American magazines (2001-2012) examined reporting of skin cancer risk factors, UV behaviors, and early detection in article text (n = 761) and images (n = 1267). Chi-square and correlational analyses were used determine whether coverage changed in relation to the 2006 IARC report. The total volume of articles about skin cancer and tanning increased modestly after the IARC report (χ (2) = 4.57, df = 1, p Magazines were more likely to encourage sunscreen use (χ (2) = 11.55, df = 1, p magazines to promote sun avoidance (χ (2) = 6.82, df = 1, p magazine reporting, there is a need for more effective dissemination of public health messages about skin cancer and tanning.

  6. Wavelet based analysis of TanDEM-X and LiDAR DEMs across a tropical vegetation heterogeneity gradient driven by fire disturbance in Indonesia

    NARCIS (Netherlands)

    Grandi, De Elsa Carla; Mitchard, Edward; Hoekman, Dirk

    2016-01-01

    Three-dimensional information provided by TanDEM-X interferometric phase and airborne Light Detection and Ranging (LiDAR) Digital ElevationModels (DEMs) were used to detect differences in vegetation heterogeneity through a disturbance gradient in Indonesia. The range of vegetation types developed

  7. Characteristics and Expression Profile of KRT71 Screened by Suppression Subtractive Hybridization cDNA Library in Curly Fleece Chinese Tan Sheep.

    Science.gov (United States)

    Kang, Xiaolong; Liu, Yufang; Zhang, Jibin; Xu, Qinqin; Liu, Chengkun; Fang, Meiying

    2017-07-01

    As an important commercial trait for sheep, curly fleece has a great economic impact on production costs and efficiency in sheep industry. To identify genes that are important for curly fleece formation in mammals, a suppression subtractive hybridization analysis was performed on the shoulder skin tissues exposed to two different growth stages of Chinese Tan sheep with different phenotypes (curly fleece and noncurling fleece). BLAST analysis identified 67 differentially expressed genes, of which 31 were expressed lower and 36 were expressed higher in lambs than in adult sheep. Differential expressions of seven randomly selected genes were verified using quantitative real-time polymerase chain reaction (qRT-PCR). KRT71 gene was selected for further study due to its high correlation with the curly hair phenotype in various mammal species. Semi-qPCR showed distinctively high expression of KRT71 in skin tissues. Moreover, qPCR result showed a significantly higher expression of KRT71 in curly fleece than noncurling Tan sheep. The luciferase assay and electrophoresis mobility shift assay showed that there were transcription factor binding sites in the promoter region of KRT71 related to the differential expression of KRT71 at the two growth stages of Tan sheep. Online bioinformation tools predicted MFZ1 as a transcriptional factor that regulates the expression of KRT71. These studies on KRT71 gene revealed some mechanisms underlying the relationship between the KRT71 gene and the curly fleece phenotype of Tan sheep.

  8. Maailma naftareservid / Lembo Tanning, Toivo Tanning

    Index Scriptorium Estoniae

    Tanning, Lembo

    2008-01-01

    Ilmunud ka: Buhgalterskije Novosti nr. 4 lk. 37-41. Maailmaturul jätkub toornafta hindade kasv, maailma uuritud naftavarud ja reservid. Tulevikus hakkab nafta ja selle hind paljuski määrama ühe või teise riigi majandusarengut ning sellest omakorda nende sõjalist võimsust ja poliitilist mõjuvõimu. Tabelid: Tõestatud naftavarud, 2007; Olemasolevad tõestatud naftavarud, 1986-2006. Diagrammid: 10 suuremat nafta reservidega riiki, 2007; Maailma nafta reservid, 2006

  9. Euroopa Liidu eelarve / Lembo Tanning, Toivo Tanning

    Index Scriptorium Estoniae

    Tanning, Lembo

    2007-01-01

    Ilmunud ka: Buhgalterskije Novosti, nr. 3, 2007, lk. 33-39. Ülevaade Euroopa Liidu eelarve moodustamise põhimõtetest ja prioriteetidest. Diagramm: Euroopa Liidu eelarve 2006-2013. Graafikud: ELi ühtekuuluvussummad 2007-2013; Eesti ühtlustustoetused 2007-2013. Tabel: Balti riikidele eraldatavad ühtlustamisfondi summad 2007-2013

  10. Contrasting effects of an ultraviolet B and an ultraviolet A tanning lamp on interleukin-6, tumour necrosis factor-alpha and intercellular adhesion molecule-1 expression.

    Science.gov (United States)

    Clingen, P H; Berneburg, M; Petit-Frère, C; Woollons, A; Lowe, J E; Arlett, C F; Green, M H

    2001-07-01

    Recent studies have demonstrated that a tanning lamp emitting predominantly ultraviolet (UV) A induces significant yields of the type of potentially mutagenic DNA damage that are associated with the onset of skin cancer (i.e. cyclobutane pyrimidine dimers). UV-induced immunosuppression is also an important event leading to skin cancer. To the modulation of key immunological molecules following exposure to a broad-spectrum UVB lamp and a predominantly UVA-emitting tanning lamp using model in vitro systems. We compared secretion and mRNA expression of interleukin (IL)-6 and tumour necrosis factor (TNF)-alpha in normal human epidermal keratinocytes, and interferon (IFN)-gamma-induced intracellular adhesion molecule (ICAM)-1 in normal human fibroblasts irradiated in vitro with a broad-spectrum UVB lamp or with a Philips 'Performance' tanning lamp. With broad-spectrum UVB irradiation, upregulation of IL-6 and TNF-alpha mRNA was detected 6 h after irradiation, and a dose-dependent increase of cytokines in the supernatants of irradiated cells was found 24 h after irradiation. In contrast, there was no cytokine secretion and little evidence for mRNA upregulation following exposure to a tanning lamp. When cells were exposed first to broad-spectrum UVB, then the tanning lamp, UVB-induced cytokine secretion was inhibited, although mRNA levels were upregulated to a level close to that observed with UVB alone. By using a Schott WG 320 nm filter to attenuate the level of UVB relative to UVA emitted by the tanning lamp, the inhibition of cytokine secretion was shown to be associated with UVA exposure. Both UV sources inhibited IFN-gamma-induced ICAM-1 mRNA expression in a dose-dependent fashion. By using a Schott WG 335 nm filter, inhibition of ICAM-1 mRNA expression by the tanning lamp was shown to be associated with UVB exposure. These results suggest that UV sources emitting different levels of UVA and UVB have differential effects on the modulation of different

  11. Progressive outer retinal necrosis presenting as cherry red spot.

    Science.gov (United States)

    Yiu, Glenn; Young, Lucy H

    2012-10-01

    To report a case of progressive outer retinal necrosis (PORN) presenting as a cherry red spot. Case report. A 53-year-old woman with recently diagnosed HIV and varicella-zoster virus (VZV) aseptic meningitis developed rapid sequential vision loss in both eyes over 2 months. Her exam showed a "cherry red spot" in both maculae with peripheral atrophy and pigmentary changes, consistent with PORN. Due to her late presentation and the rapid progression of her condition, she quickly developed end-stage vision loss in both eyes. PORN should be considered within the differential diagnosis of a "cherry red spot." Immune-deficient patients with a history of herpetic infection who present with visual loss warrant prompt ophthalmological evaluation.

  12. Sweet Spot Size in Virtual Sound Reproduction: A Temporal Analysis

    DEFF Research Database (Denmark)

    Lacouture Parodi, Yesenia; Rubak, Per

    2009-01-01

    The influence of head misalignments on the performance of binaural reproduction systems through loudspeakers is often evaluated in the frequency domain. The changes in magnitude give us an idea of how much of the crosstalk is leaked into the direct signal and therefore a sweet spot performance can......-correlation we estimate the interaural time delay and define a sweet spot. The analysis is based on measurements carried out on 21 different loudspeaker configurations, including two- and four-channels arrangements. Results show that closely spaced loudspeakers are more robust to lateral displacements than wider...... span angles. Additionally, the sweet spot as a function of head rotations increases systematically when the loudspeakers are placed at elevated positions....

  13. Is there a Sweet Spot in Ethical Trade?

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Lindgreen, Adam

    2018-01-01

    might emerge, reflecting an amended version of Gereffi et al.'s (2005) theory of value chain governance. We conclude that the possibility of identifying a sweet spot in ethical trade improves as we move from market-based transactions toward hierarchical governance in global production networks.......We undertake a critical appraisal of the existence of the so- called 'sweet spot' in ethical trade at which the interests of buyers, suppliers, and workers intersect to enable benefits for commercial buyers and suppliers and improvements in the conditions of workers at the base of global production...... networks. In turn, we take the perspectives of three central actors typically involved in ethical trade: buyers/brands, suppliers in the Global South, and workers at the base of these networks. By applying all three perspectives, we theorize about the circumstances in which the sweet spot in ethical trade...

  14. Design of the smart scenic spot service platform

    Science.gov (United States)

    Yin, Min; Wang, Shi-tai

    2015-12-01

    With the deepening of the smart city construction, the model "smart+" is rapidly developing. Guilin, the international tourism metropolis fast constructing need smart tourism technology support. This paper studied the smart scenic spot service object and its requirements. And then constructed the smart service platform of the scenic spot application of 3S technology (Geographic Information System (GIS), Remote Sensing (RS) and Global Navigation Satellite System (GNSS)) and the Internet of things, cloud computing. Based on Guilin Seven-star Park scenic area as an object, this paper designed the Seven-star smart scenic spot service platform framework. The application of this platform will improve the tourists' visiting experience, make the tourism management more scientifically and standardly, increase tourism enterprises operating earnings.

  15. PyTranSpot: A tool for multiband light curve modeling of planetary transits and stellar spots

    Science.gov (United States)

    Juvan, Ines G.; Lendl, M.; Cubillos, P. E.; Fossati, L.; Tregloan-Reed, J.; Lammer, H.; Guenther, E. W.; Hanslmeier, A.

    2018-02-01

    Several studies have shown that stellar activity features, such as occulted and non-occulted starspots, can affect the measurement of transit parameters biasing studies of transit timing variations and transmission spectra. We present PyTranSpot, which we designed to model multiband transit light curves showing starspot anomalies, inferring both transit and spot parameters. The code follows a pixellation approach to model the star with its corresponding limb darkening, spots, and transiting planet on a two dimensional Cartesian coordinate grid. We combine PyTranSpot with a Markov chain Monte Carlo framework to study and derive exoplanet transmission spectra, which provides statistically robust values for the physical properties and uncertainties of a transiting star-planet system. We validate PyTranSpot's performance by analyzing eleven synthetic light curves of four different star-planet systems and 20 transit light curves of the well-studied WASP-41b system. We also investigate the impact of starspots on transit parameters and derive wavelength dependent transit depth values for WASP-41b covering a range of 6200-9200 Å, indicating a flat transmission spectrum.

  16. Variability of Jupiter's Five-Micron Hot Spot Inventory

    Science.gov (United States)

    Yanamandra-Fisher, Padma A.; Orton, G. S.; Wakefield, L.; Rogers, J. H.; Simon-Miller, A. A.; Boydstun, K.

    2012-01-01

    Global upheavals on Jupiter involve changes in the albedo of entire axisymmetric regions, lasting several years, with the last two occurring in 1989 and 2006. Against this backdrop of planetary-scale changes, discrete features such as the Great Red Spot (GRS), and other vortices exhibit changes on shorter spatial- and time-scales. We track the variability of the discrete equatorial 5-micron hot spots, semi-evenly spaced in longitude and confined to a narrow latitude band centered at 6.5degN (southern edge of the North Equatorial Belt, NEB), abundant in Voyager images. Tantalizingly similar patterns were observed in the visible (bright plumes and blue-gray regions), where reflectivity in the red is anti-correlated with 5-microns thermal radiance. Ortiz et al. (1998, GRL, 103) characterized the latitude and drift rates of the hot spots, including the descent of the Galileo probe at the southern edge of a 5-micron hot spot, as the superposition of equatorial Rossby waves, with phase speeds between 99 - 103m/s, relative to System III. We note that the high 5-micron radiances correlate well but not perfectly with high 8.57-micron radiances. Because the latter are modulated primarily by changes in the upper ammonia (NH3) ice cloud opacity, this correlation implies that changes in the ammonia ice cloud field may be responsible for the variability seen in the 5-m maps. During the NEB fade (2011 - early 2012), however, these otherwise ubiquitous features were absent, an atmospheric state not seen in decades. The ongoing NEB revival indicates nascent 5-m hot spots as early as April 2012, with corresponding visible dark spots. Their continuing growth through July 2012 indicates the possit.le re-establishment of Rossby waves. The South Equatorial Belt (SEB) and NEB revivals began similarly with an instability that developed into a major outbreak, and many similarities in the observed propagation of clear regions.

  17. Jumping-droplet electronics hot-spot cooling

    International Nuclear Information System (INIS)

    Oh, Junho; Birbarah, Patrick; Foulkes, Thomas; Yin, Sabrina L.; Rentauskas, Michelle

    2017-01-01

    Demand for enhanced cooling technologies within various commercial and consumer applications has increased in recent decades due to electronic devices becoming more energy dense. This study demonstrates jumping-droplet based electric-field-enhanced (EFE) condensation as a potential method to achieve active hot spot cooling in electronic devices. To test the viability of EFE condensation, we developed an experimental setup to remove heat via droplet evaporation from single and multiple high power gallium nitride (GaN) transistors acting as local hot spots (4.6 mm x 2.6 mm). An externally powered circuit was developed to direct jumping droplets from a copper oxide (CuO) nanostructured superhydrophobic surface to the transistor hot spots by applying electric fields between the condensing surface and the transistor. Heat transfer measurements were performed in ambient air (22-25°C air temperature, 20-45% relative humidity) to determine the effect of gap spacing (2-4 mm), electric field (50-250 V/cm), and heat flux (demonstrated to 13 W/cm 2 ). EFE condensation was shown to enhance the heat transfer from the local hot spot by ≈ 200% compared to cooling without jumping and by 20% compared to non-EFE jumping. Dynamic switching of the electric field for a two-GaN system reveals the potential for active cooling of mobile hot spots. The opportunity for further cooling enhancement by the removal of non-condensable gases promises hot spot heat dissipation rates approaching 120 W/cm 2 . Finally, this work provides a framework for the development of active jumping droplet based vapor chambers and heat pipes capable of spatial and temporal thermal dissipation control.

  18. Jumping-droplet electronics hot-spot cooling

    Science.gov (United States)

    Oh, Junho; Birbarah, Patrick; Foulkes, Thomas; Yin, Sabrina L.; Rentauskas, Michelle; Neely, Jason; Pilawa-Podgurski, Robert C. N.; Miljkovic, Nenad

    2017-03-01

    Demand for enhanced cooling technologies within various commercial and consumer applications has increased in recent decades due to electronic devices becoming more energy dense. This study demonstrates jumping-droplet based electric-field-enhanced (EFE) condensation as a potential method to achieve active hot spot cooling in electronic devices. To test the viability of EFE condensation, we developed an experimental setup to remove heat via droplet evaporation from single and multiple high power gallium nitride (GaN) transistors acting as local hot spots (4.6 mm × 2.6 mm). An externally powered circuit was developed to direct jumping droplets from a copper oxide (CuO) nanostructured superhydrophobic surface to the transistor hot spots by applying electric fields between the condensing surface and the transistor. Heat transfer measurements were performed in ambient air (22-25 °C air temperature, 20%-45% relative humidity) to determine the effect of gap spacing (2-4 mm), electric field (50-250 V/cm) and applied heat flux (demonstrated to 13 W/cm2). EFE condensation was shown to enhance the heat transfer from the local hot spot by ≈200% compared to cooling without jumping and by 20% compared to non-EFE jumping. Dynamic switching of the electric field for a two-GaN system reveals the potential for active cooling of mobile hot spots. The opportunity for further cooling enhancement by the removal of non-condensable gases promises hot spot heat dissipation rates approaching 120 W/cm2. This work provides a framework for the development of active jumping droplet based vapor chambers and heat pipes capable of spatial and temporal thermal dissipation control.

  19. Sugarbeet leaf spot disease (Cercospora beticola Sacc.)dagger.

    Science.gov (United States)

    Weiland, John; Koch, Georg

    2004-05-01

    SUMMARY Leaf spot disease caused by Cercospora beticola Sacc. is the most destructive foliar pathogen of sugarbeet worldwide. In addition to reducing yield and quality of sugarbeet, the control of leaf spot disease by extensive fungicide application incurs added costs to producers and repeatedly has selected for fungicide-tolerant C. beticola strains. The genetics and biochemistry of virulence have been examined less for C. beticola as compared with the related fungi C. nicotianae, C. kikuchii and C. zeae-maydis, fungi to which the physiology of C. beticola is often compared. C. beticola populations generally are not characterized as having race structure, although a case of race-specific resistance in sugarbeet to C. beticola has been reported. Resistance currently implemented in the field is quantitatively inherited and exhibits low to medium heritability. Cercospora beticola Sacc.; Kingdom Fungi, Subdivision Deuteromycetes, Class Hyphomycetes, Order Hyphales, Genus Cercospora. Circular, brown to red delimited spots with ashen-grey centre, 0.5-6 mm diameter; dark brown to black stromata against grey background; pale brown unbranched sparingly septate conidiophores, hyaline acicular conidia, multiseptate, from 2.5 to 4 microm wide and 50-200 microm long. Propagative on Beta vulgaris and most species of Beta. Reported on members of the Chenopodiaceae and on Amaranthus. Disease symptoms: Infected leaves and petioles of B. vulgaris exhibit numerous circular leaf spots that coalesce in severe cases causing complete leaf collapse. Dark specks within a grey spot centre are characteristic for the disease. Older leaves exhibit a greater number of lesions with larger spot diameter. During the latter stage of severe epiphytotics, new leaf growth can be seen emerging from the plant surrounded by prostrate, collapsed leaves. Fungicides in the benzimidazole and triazole class as well as organotin derivatives and strobilurins have successfully been used to control Cercospora

  20. Mutant of Japanese pear resistant to Black Spot Disease

    International Nuclear Information System (INIS)

    Sanada, T.; Nishida, T.; Ikeda, F.

    1987-01-01

    Full text: Nijisseike is one of the leading cultivars of Japanese pear (Pyrus serotinea Rehd.), but susceptible to black spot disease. Farmers try to prevent this disease by wrapping the fruit with a paper bag and by repeated spraying of fungicides. The disease is caused by a Japanese pear pathotype of Alternaria alternata (Fr.) Keissler. Susceptibility is controlled by a single dominant gene. In 1962, grafted trees of this cultivar were planted at a distance between 53 and 93 m from the 60 Co source in the gamma-field (daily dose 15-4 rad). One branch on a tree planted at 53 m was detected as resistant in 1981. Under field conditions, black spots were observed on many fruits and leaves of the original trees by natural infection in early July, however, they were not observed on the mutant. To examine the resistance of the mutant, artificial inoculations were made using spores of the pathogen and the host specific toxin produced by germinating spores. When some drops of the spore suspension are placed on leaves, the formation of black spots depends upon the leaf age. In a resistant cv. as Chojuro, black spot symptoms are formed only when inoculated on young leaves. An intermediate reaction was observed in the mutant, whereas the original Nijisseiki showed severe symptoms. When inoculation was made on matured fruit skins, no black spot was formed on the mutant just like on the resistant cv. Chojuro, while many small black spots were formed and grew into large spots overlapping each other on the susceptible cv. Nijisseiki. In case of the crude toxin inoculation (4-0.04 ppm) of cv. Nijisseiki black spots were formed on the surface of the susceptible fruit skin, and necrotic lesions at the cut end of detached small pieces of leaves, although reaction on fruit skins was weaker compared with inoculation by spores. However, no symptoms were observed from the toxin application on the mutant and the resistant cv. Chojuro. That the resistance of the mutant is classified as