Tacrolimus is a class II low-solubility high-permeability drug: the effect of P-glycoprotein efflux on regional permeability of tacrolimus in rats.

Science.gov (United States)

Tamura, Shigeki; Ohike, Atsuo; Ibuki, Rinta; Amidon, Gordon L; Yamashita, Shinji

2002-03-01

The objective of this study is to investigate the role of P-glycoprotein (P-gp), a membrane efflux pump associated with multidrug resistance (MDR) and a known substrate for tacrolimus, in determining the regional intestinal permeability of tacrolimus in rats. Thus, isolated segments of rat jejunum, ileum, or colon were perfused with tacrolimus solutions containing polyethoxylated hydrogenated castor oil 60 surfactant, and with or without verapamil, a P-gp substrate used to reverse the MDR phenotype. The results indicated that the intrinsic permeability of tacrolimus in the jejunum, calculated on the basis of the concentration of non-micellized free tacrolimus, was quite high ( approximately 1.4 x 10(-4) cm/s). The apparent permeability (P(app)) in the jejunum was unaffected by the presence of verapamil; however, the P(app) in the ileum and the colon increased significantly in the presence of verapamil and were similar to the values observed in the jejunum. The results suggest that systemic absorption of tacrolimus from the gastrointestinal tract could be significantly affected by P-gp efflux mechanisms. It is also possible that differences in P-gp function at various intestinal sites in a subject or at a given intestinal site in various subjects could lead to large intra- and interindividual variability in bioavailability of tacrolimus following oral administration. Copyright 2002 Wiley-Liss, Inc. and the American Pharmaceutical Association .

Tacrolimus in preventing transplant rejection in Chinese patients – optimizing use

Directory of Open Access Journals (Sweden)

Li CJ

2015-01-01

Full Text Available Chuan-Jiang Li,1,* Liang Li2,* 1Department of Surgery, Nanfang Hospital, 2Department of Medical Genetics, School of Basic Medical Sciences, Southern Medical University, Guangzhou, People’s Republic of China *The authors contributed equally to this work Abstract: Tacrolimus is a product of fermentation of Streptomyces, and belongs to the family of calcineurin inhibitors. It is a widely used immunosuppressive drug for preventing solid-organ transplant rejection. Compared to cyclosporine, tacrolimus has greater immunosuppressive potency and a lower incidence of side effects. It has been accepted as first-line treatment after liver and kidney transplantation. Tacrolimus has specific features in Chinese transplant patients; its in vivo pharmacokinetics, treatment regimen, dose and administration, and adverse-effect profile are influenced by multiple factors, such as genetics and the spectrum of primary diseases in the Chinese population. We reviewed the clinical experience of tacrolimus use in Chinese liver- and kidney-transplant patients, including the pharmacology of tacrolimus, the immunosuppressive effects of tacrolimus versus cyclosporine, effects of different factors on tacrolimus metabolism on Chinese patients, personalized medicine, clinical safety profile, and patient satisfaction and adherence. This article provides guidance for the rational and efficient use of tacrolimus in Chinese organ-transplant patients. Keywords: tacrolimus, liver transplantation, kidney transplant, Chinese, personalized medicine

Therapeutic equivalence and pharmacokinetics of generic tacrolimus formulation in de novo kidney transplant patients.

Science.gov (United States)

Min, Sang-Il; Ha, Jongwon; Kim, Yon Su; Ahn, Sang Hyun; Park, Taejin; Park, Dae Do; Kim, Suh Min; Min, Seung-Kee; Hong, Hyejin; Ahn, Curie; Kim, Sang Joon

2013-12-01

There is a growing concern about the therapeutic equivalence of the generic tacrolimus formulation (GEN Tacrolimus) to the reference tacrolimus (REF Tacrolimus) in solid organ transplantation. A prospective, randomized study of 126 de novo renal transplant patients was conducted to compare the efficacy, safety and pharmacokinetic (PK) profiles between GEN tacrolimus (n = 63) and REF tacrolimus (n = 63). The PK of tacrolimus was evaluated on Day 10 and 6 months under steady-state condition. Crossover study was carried out in 66 patients at 6 months. On Day 10, 117 patients completed PK profiles (54 GEN tacrolimus and 63 REF tacrolimus) and GEN tacrolimus showed comparable C(0) (9.8 ± 2.5 versus 9.7 ± 3.0 ng/mL, P = 0.80) but significantly higher dose-normalized C(max) (309.1 ± 191.9 versus 192.5 ± 95.2 ng/mL/mg/kg, P PK profiles evaluated at 9 months showed that generic substitution also resulted in an 'early and high C(max)'. Efficacy and safety data were comparable over the 9-month study period. Therapeutic equivalence and the PK of GEN tacrolimus should be evaluated in patients undergoing de novo renal transplantation.

Treatment of Acute Tacrolimus Toxicity with Phenytoin in Solid Organ Transplant Recipients

Directory of Open Access Journals (Sweden)

Arin S. Jantz

2013-01-01

Full Text Available The pharmacokinetics of tacrolimus are influenced by many factors, including genetic variability, acute infections, liver dysfunction, and interacting medications, which can result in elevated concentrations. The most appropriate management of acute tacrolimus toxicity has not been defined though case reports exist describing the therapeutic use of enzyme inducers to increase tacrolimus metabolism and decrease concentrations. We are reporting on the utilization of phenytoin to assist in decreasing tacrolimus concentrations in a case series of four solid organ transplant recipients with acute, symptomatic tacrolimus toxicity presenting with elevated serum creatinine, potassium, and tacrolimus trough concentrations greater than 30 ng/mL. All four patients had the potential causative agents stopped or temporarily held and were given 300 to 400 mg/day of phenytoin for two to three days. Within three days of beginning phenytoin, all four patients had a decrease in tacrolimus concentration to less than 15 ng/mL, a return to or near baseline creatinine concentration, and lack of phenytoin-related side effects. Therefore, phenytoin appears to be a safe and potentially beneficial treatment option in patients with symptomatic tacrolimus toxicity.

Analyses of marketplace tacrolimus drug product quality: bioactivity, NMR and LC-MS.

Science.gov (United States)

Sommers, Cynthia D; Pang, Eric S; Ghasriani, Houman; Berendt, Robert T; Vilker, Vincent L; Keire, David A; Boyne, Michael T

2013-11-01

Tacrolimus (FK506) is a potent, narrow therapeutic index, immunosuppressive drug used to avoid organ rejection in patients that have undergone organ transplantation. Recent clinical reports suggested a significant reduction in the tacrolimus concentration/dose ratio in the plasma of liver and kidney recipients when the reference listed drug was substituted with a generic drug. In response to these concerns about switching between tacrolimus from different approved manufacturers during treatment, the FDA initiated purity, potency and quality studies of the innovator and generic tacrolimus products available in the US marketplace. A combination of analytical methods, including mass spectrometry (LC-MS), nuclear magnetic resonance (NMR) and bioactivity assay were developed and validated to assess the quality of tacrolimus. These tests measured the identity, impurities and activity of tacrolimus from active pharmaceutical ingredient (API) sources and with formulated drug product from five different approved manufactures. In addition, some testing was performed on tacrolimus capsules obtained from a non US approved Indian source. The data obtained showed no discernible difference in the impurity profiles and potency between the generic and innovator tacrolimus products. Copyright © 2013. Published by Elsevier B.V.

Cyclosporin versus tacrolimus for liver transplanted patients

DEFF Research Database (Denmark)

Haddad, E M; McAlister, V C; Renouf, E

2006-01-01

Most liver transplant recipients receive either cyclosporin or tacrolimus to prevent rejection. Both drugs inhibit calcineurin phosphatase which is thought to be the mechanism of their anti-rejection effect and principle toxicities. The drugs have different pharmacokinetic profiles and potencies....... Several randomised clinical trials have compared cyclosporin and tacrolimus in liver transplant recipients, but it remains unclear which is superior....

Mechanisms of lower maintenance dose of tacrolimus in obese patients.

Science.gov (United States)

Sawamoto, Kazuki; Huong, Tran T; Sugimoto, Natsumi; Mizutani, Yuka; Sai, Yoshimichi; Miyamoto, Ken-ichi

2014-01-01

A retrospective analysis suggested that blood tacrolimus concentrations were consistent among patients with a body mass index (BMI) that was lean (maintenance dose of tacrolimus in patients with BMI ≥ 25 was significantly lower compared with that in patients with a BMI of less than 25. Lean and obese Zucker rats fed a normal diet were given tacrolimus intravenously or orally. The blood concentrations of tacrolimus in obese rats were significantly higher than those in lean rats after administration via both routes. The moment analysis has suggested that CLtot and Vdss of tacrolimus were not significantly different between lean and obese rats. The bioavailability was higher in obese rats, compared with that in lean rats. The protein expression of Cyp3a2 in the liver was significantly decreased in obese rats, compared with lean rats, while P-gp in the small intestine was also significantly decreased in obese rats. These results suggested that the steady-state trough concentration of tacrolimus in obese patients was well maintained by a relatively low dose compared with that in normal and lean patients, presumably due to increased bioavailability.

Generic tacrolimus in solid organ transplantation

DEFF Research Database (Denmark)

Taube, D; Jones, G; O'Beirne, J

2014-01-01

The availability of a wide range of immunosuppressive therapies has revolutionized the management of patients who have undergone solid organ transplantation (SOT). However, the cost of immunosuppressive drugs remains high. This situation has led to the development of generic equivalents, which...... innovator tacrolimus drug (Prograf) in both healthy volunteers and kidney transplant patients. Clinical experience with this generic tacrolimus formulation has also been established in both de novo and conversion patients who have undergone kidney and liver transplantation, as well as in conversion of other...

Tacrolimus inhibits the revascularization of isolated pancreatic islets.

Directory of Open Access Journals (Sweden)

Ryuichi Nishimura

Full Text Available AIMS: Immunosuppressive drugs could be crucial factors for a poor outcome after islet allotransplantation. Unlike rapamycin, the effects of tacrolimus, the current standard immunosuppressant used in islet transplantation, on graft revascularization remain unclear. We examined the effects of tacrolimus on islet revascularization using a highly sensitive imaging system, and analyzed the gene expression in transplanted islets by introducing laser microdissection techniques. METHODS: Islets isolated from C57BL/6-Tg (CAG-EGFP mice were transplanted into the nonmetallic dorsal skinfold chamber on the recipients. Balb/c athymic mice were used as recipients and were divided into two groups: including a control group (n = 9 and tacrolimus-treated group (n = 7. The changes in the newly-formed vessels surrounding the islet grafts were imaged and semi-quantified using multi-photon laser-scanning microscopy and a Volocity system. Gene expression in transplanted islets was analyzed by the BioMark dynamic system. RESULTS: The revascularization process was completed within 14 days after pancreatic islet transplantation at subcutaneous sites. The newly-formed vascular volume surrounding the transplanted islets in the tacrolimus-treated group was significantly less than that in the control group (p<0.05. Although the expression of Vegfa (p<0.05 and Ccnd1 (p<0.05 was significantly upregulated in the tacrolimus-treated group compared with that of the control group, no differences were observed between the groups in terms of other types of gene expression. CONCLUSIONS: The present study demonstrates that tacrolimus inhibits the revascularization of isolated pancreatic islets without affecting the characteristics of the transplanted grafts. Further refinements of this immunosuppressive regimen, especially regarding the revascularization of islet grafts, could improve the outcome of islet allotransplantation.

TACROLIMUS OINTMENT FOR TREATMENT OF VKC

Directory of Open Access Journals (Sweden)

Navin Chandra

2017-05-01

Full Text Available BACKGROUND Vernal Keratoconjunctivitis (VKC is a bilateral recurrent chronic allergy inflammatory disorder of ocular surface, which is seasonally exacerbated mostly involving tarsal and bulbar conjunctiva in chronic and severe cases involves cornea as well. Affects mostly children and young adults with male predominance. Tacrolimus (FK-506 is a highly potent immune modulatory agent produced by the fungus Streptomyces tsukubaensis. MATERIALS AND METHODS This prospective, nonrandomised case series enrolled 20 patients (40 eyes with severe VKC who were treated with tacrolimus 0.1% ointment. The mean age of the patients was 18.25 ± 4.2 years (range, 9-31 years. Each patient completed a follow-up period of at least 12 months. The main outcome measure was the clinical response to treatment. RESULTS Significant improvements in clinical signs and symptoms were achieved in all patients 6 weeks after starting treatment with topical tacrolimus. Treatment was gradually reduced with increasing intervals between applications. VKC recurred in all patients who attempted to discontinue treatment. No additional medications were required and no significant changes in visual acuity or refraction were documented. Five patients discontinued treatment due to a severe burning sensation and were excluded from the study. CONCLUSION Tacrolimus 0.1% ointment is a safe and effective treatment for VKC refractory to standard treatment and maybe used as a substitute for steroid treatments used to controlled-disease activity. However, adverse effects could cause poor patient compliance.

Multi-site analytical evaluation of the Abbott ARCHITECT tacrolimus assay.

Science.gov (United States)

Wallemacq, Pierre; Goffinet, Jean-Sebastien; O'Morchoe, Susan; Rosiere, Thomas; Maine, Gregory T; Labalette, Myriam; Aimo, Giuseppe; Dickson, Diana; Schmidt, Ed; Schwinzer, Reinhard; Schmid, Rainer W

2009-04-01

The objective of this study was to evaluate the analytical performance of the Abbott ARCHITECT Tacrolimus immunoassay. Proficiency panels and specimens from a population of organ transplant recipients were analyzed in 6 clinical laboratories in Europe and the United States, and the results were compared with other methods. The ARCHITECT assay requires a whole blood specimen pretreatment step with methanol/zinc sulfate to precipitate protein and extract the drug, followed by a 30-minute immunoassay using anti-tacrolimus antibody-coated paramagnetic microparticles and an acridinium-tacrolimus tracer. The assay was free from hematocrit interference in the range 25%-55% and from interference by extremes of cholesterol, triglycerides, bilirubin, total protein, and uric acid. The total percent of coefficient of variations of the assay were 4.9%-7.6% at 3 ng/mL, 2.9%-4.6% at 8.6 ng/mL, and 3.1%-8.2% at 15.5 ng/mL. Limit of detection was Abbott IMx Tacrolimus II immunoassay (4 sites) yielded average biases between -0.94 and +0.26 ng/mL; ARCHITECT assay versus the Dade Dimension Tacrolimus immunoassay (2 sites) yielded average biases of -0.46 and +0.11 ng/mL; and ARCHITECT assay versus LC-MSMS methods at 2 sites yielded average biases of +0.51 and +1.63 ng/mL. Spearman correlation coefficients were >/=0.90 on all method comparisons. The ARCHITECT Tacrolimus assay is a semiautomated, robust, and highly sensitive immunoassay, representing an alternative approach for laboratories not equipped with LC-MSMS, and meets the 1 ng/mL recommendation of LOQ by the European Consensus Conference on Tacrolimus Optimization.

Prevention of organ rejection in renal and liver transplantation with extended release tacrolimus

Directory of Open Access Journals (Sweden)

Reschen ME

2014-09-01

Full Text Available Michael E Reschen, Christopher A O’Callaghan Henry Wellcome Building, Nuffield Department of Medicine, University of Oxford, Oxford, United Kingdom Abstract: Tacrolimus is the key immunosuppressant used to prevent allograft rejection in kidney and liver transplant recipients. Despite the efficacy of tacrolimus and adjunctive immunosuppressants, a substantial number of patients experience episodes of acute rejection and late graft loss. Nonadherence is an etiological factor in both acute rejection and graft loss. In 2007, a prolonged release version of tacrolimus became available that allows once daily administration, thus halving the pill burden compared to the standard twice-daily tacrolimus. An increasing number of studies in de novo transplantation and in treatment conversion have evaluated the pharmacokinetic profile, efficacy, and safety of prolonged-release tacrolimus. We have reviewed the literature on the use of prolonged-release tacrolimus and hope that this will be of value in the design of protocols for transplant immunosuppression.Keywords: immunosuppression, kidney, hepatic, allograft, adherence

Síndrome de encefalopatía posterior reversible secundaria a tacrolimus

Directory of Open Access Journals (Sweden)

María J. Rodríguez-González

2016-01-01

Full Text Available Los inhibidores de la calcineurina, la ciclosporina y el tacrolimus han jugado un papel preponderante en la prevención de los episodios de rechazo y de la enfermedad de injerto contra el huésped en pacientes tratados mediante el trasplante de órgano sólido y de la médula ósea. No obstante, el tacrolimus presenta efectos adversos relacionados con la neurotoxicidad, siendo el síndrome de encefalopatía posterior reversible la consecuencia más severa de dicha neurotoxicidad. El reporte de nuestro caso es de una mujer de 30 años de edad, con 2 días de evolución de cefalea intensa en la frente, náuseas, emesis, hiporexia y epigastralgia, afebril. Antecedente de un trasplante cardiaco 45 días antes, en tratamiento inmunosupresor con tacrolimus y micofenolato mofetilo. Se documentan niveles de tacrolimus adecuados (12,1 ng/ml, los estudios imagenológicos normales y los resultados de laboratorio negativos para infección, lo que permite descartar las causas vasculares e infecciosas y la neurotoxicidad por el tacrolimus. Sin embargo, ante el desarrollo de alteraciones neuropsiquiátricas, y a pesar de niveles de tacrolimus < 5,5 ng/ml, se realiza nueva resonancia nuclear magnética cerebral con hallazgos que indican síndrome de leucoencefalopatía posterior reversible. Se suspende el tacrolimus y se inicia tratamiento con everolimus, lográndose remisión total. Este sería el primer caso reportado en el cual las alteraciones imagenológicas asociadas al síndrome de encefalopatía posterior reversible se desarrollaron en una paciente intervenida de trasplante cardiaco con niveles de tacrolimus < 10 ng/ml. El reporte de este caso permitirá a los grupos médicos tratantes considerar este diagnóstico a pesar de niveles de tacrolimus en rango terapéutico, de manera que se realice un reconocimiento y tratamiento oportuno, evitando así el desarrollo de complicaciones o secuelas neurológicas.

Evaluation of Flexible Tacrolimus Drug Concentration Monitoring Approach in Patients Receiving Extended-Release Once-Daily Tacrolimus Tablets.

Science.gov (United States)

Philosophe, Benjamin; Leca, Nicolae; West-Thielke, Patricia M; Horwedel, Timothy; Culkin-Gemmell, Christine; Kistler, Kristin; Stevens, Daniel R

2018-02-20

The majority of United States kidney transplant patients are treated with tacrolimus, a drug effective in preventing graft rejection, but with a narrow therapeutic range, necessitating close monitoring to avoid increased risks of transplant rejection or toxicity if the tacrolimus concentration is too low or too high, respectively. The trough drug concentration tests are time sensitive; patients treated on a twice-daily basis have blood draws exactly 12 hours after their previous dose. The schedule's rigidity causes problems for both patients and health care providers. Novel once-daily tacrolimus formulations such as LCPT (an extended-release tablet by Veloxis Pharmaceuticals, Inc., Cary, North Carolina) have allowed for blood draws on a once-daily basis; however, even that schedule can be restrictive. Results from tests taken either before or after that 24-hour target time may be discarded, or worse, may lead to inappropriate dose changes. Data from ASTCOFF, a phase 3B pharmacokinetic clinical trial (NCT02339246), demonstrated that the unique pharmacokinetic curve of LCPT may allow for a therapeutic monitoring window that extends for 3 hours before or after the 24-hour monitoring target. Furthermore, important tools to help clinicians interpret these levels, such as formulas to estimate the 24-hour trough level if an alternative monitoring time is used, were constructed from these data. These study results give treating clinicians access to data that allow them to safely use and monitor LCPT in their patients and expand the body of evidence surrounding differentiation and practical application of the novel LCPT tacrolimus formulation. © 2018, The Authors. The Journal of Clinical Pharmacology published by Wiley Periodicals, Inc. on behalf of American College of Clinical Pharmacology.

Diabetic ketoacidosis associated with tacrolimus in solid organ transplant recipients

International Nuclear Information System (INIS)

Maqsood, M.Q.; Rabbani, M.; Habib, M.; Saleem, T.

2011-01-01

Diabetic ketoacidosis in patients receiving tacrolimus in the post-transplant setting is rare. We describe two such cases in solid-organ transplant recipients. The first patient, a 17-year-old male, presented with severe diabetic ketoacidosis and was managed with intravenous fluids and insulin infusion. He was a known case of Laurence-Moon-Bardet-Biedl syndrome and had received a renal transplant 2 years ago and was receiving tacrolimus since then. Although diabetic ketoacidosis resolved in 24 hours, large doses of subcutaneous insulin (unto 130 units per day) were needed to keep serum glucose within the normal range. Substitution of tacrolimus with cyclosporine obviated the need for insulin or oral hypoglycaemics. The second patient, a 55-year-old woman, presented with a history of polyuria for 3 days. She had received a hepatic transplant 2 years ago and tacrolimus was being used since then. Mild diabetic ketoacidosis was managed with fluid resuscitation and subcutaneous insulin. Her insulin requirement after an uneventful recovery has been 54 - 70 units per day. Clinicians should be cognizant of the possibility of hyperglycaemic crisis presenting as sudden onset of diabetic ketoacidosis in patients receiving tacrolimus. Use of an alternative calcineurin inhibitor may provide a safer solution to minimize future morbidity in such patients. (author)

CYP3A5 polymorphisms in renal transplant recipients: influence on tacrolimus treatment

Directory of Open Access Journals (Sweden)

Chen L

2018-03-01

Full Text Available Lucy Chen,1 G V Ramesh Prasad2 1Kidney Transplant Program, St Michael’s Hospital, Toronto, ON, Canada; 2Division of Nephrology, St Michael’s Hospital, Toronto, ON, Canada Abstract: Tacrolimus is a commonly used immunosuppressant after kidney transplantation. It has a narrow therapeutic range and demonstrates wide interindividual variability in pharmacokinetics, leading to potential underimmunosuppression or toxicity. Genetic polymorphism in CYP3A5 enzyme expression contributes to differences in tacrolimus bioavailability between individuals. Individuals carrying one or more copies of the wild-type allele *1 express CYP3A5, which increases tacrolimus clearance. CYP3A5 expressers require 1.5 to 2-fold higher tacrolimus doses compared to usual dosing to achieve therapeutic blood concentrations. Individuals with homozygous *3/*3 genotype are CYP3A5 nonexpressers. CYP3A5 nonexpression is the most frequent phenotype in most ethnic populations, except blacks. Differences between CYP3A5 genotypes in tacrolimus disposition have not translated into differences in clinical outcomes, such as acute rejection and graft survival. Therefore, although genotype-based dosing may improve achievement of therapeutic drug concentrations with empiric dosing, its role in clinical practice is unclear. CYP3A5 genotype may predict differences in absorption of extended-release and immediate-release oral formulations of tacrolimus. Two studies found that CYP3A5 expressers require higher doses of tacrolimus in the extended-release formulation compared to immediate release. CYP3A5 genotype plays a role in determining the impact of interacting drugs, such as fluconazole, on tacrolimus pharmacokinetics. Evidence conflicts regarding the impact of CYP3A5 genotype on risk of nephrotoxicity associated with tacrolimus. Further study is required. Keywords: calcineurin inhibitor, graft, pharmacogenomics, kidney, genotype

Analysis of tacrolimus and creatinine from a single dried blood spot using liquid chromatography tandem mass spectrometry.

Science.gov (United States)

Koop, Dennis R; Bleyle, Lisa A; Munar, Myrna; Cherala, Ganesh; Al-Uzri, Amira

2013-05-01

Long term therapeutic drug monitoring and assessment of renal function are required in renal transplant recipients on immunosuppressant therapy such as tacrolimus. Dry blood spots (DBS) have been used successfully in the clinic for many years and offers a convenient, simple and non-invasive method for repeated blood tests. We developed and performed a preliminary validation of a method for the analysis of tacrolimus and creatinine from a single DBS using liquid chromatography-tandem mass spectrometric (LC-MS/MS). Tacrolimus and creatinine were extracted from a 6mm punch with a mixture of methanol/acetonitrile containing ascomycin and deuterated creatinine as internal standards. A 10 μl aliquot of the extract was analyzed directly after dilution for creatinine with normal phase high performance liquid chromatography and multiple reaction monitoring. The remainder of the extract was processed and analyzed for tacrolimus. The lower limit of quantification for tacrolimus was 1 ng/ml with accuracy of 0.34% bias and precision (CV) of 11.1%. The precision ranged from 1.33% to 7.68% and accuracy from -4.44% to 11.6% bias for the intra- and inter-day analysis. The lower limit of quantification of creatinine was 0.01 mg/dL with precision of 7.94%. Accuracy was based on recovery of additional creatinine spiked into whole blood samples and ranged from -2.45% bias at 5 mg/dL to 3.75% bias at 0.5 mg/dL. Intra- and inter-day precision was from 3.48 to 4.11%. The assay was further validated with DBS prepared from pediatric renal transplant recipients. There was excellent correlation between the levels of tacrolimus and creatinine obtained from the clinical laboratory and the DBS method developed. After additional validation, this assay may have a significant impact on compliance with medication intake as well as potentially lowering the cost associated with intravenous blood draws in clinical laboratories. Copyright © 2013 Elsevier B.V. All rights reserved.

Systematic Review and Meta-Analysis of Tacrolimus versus Ciclosporin as Primary Immunosuppression After Liver Transplant.

Directory of Open Access Journals (Sweden)

Gorden Muduma

Full Text Available Several meta-analyses comparing ciclosporin with tacrolimus have been conducted since the 1994 publication of the tacrolimus registration trials, but most captured data from randomized controlled trials (RCTs predating recent improvements in waiting list prioritization, induction protocols and concomitant medications. The present study comprised a systematic review and meta-analysis of ciclosporin and tacrolimus in liver transplant recipients using studies published since January 2000.Searches of PubMed, the Cochrane Library and EMBASE identified RCTs of tacrolimus and ciclosporin as the immunosuppressant in adult primary liver transplant recipients, published between January 2000 and August 6, 2014. A random effects meta-analysis was conducted to evaluate the relative risk of death, graft loss, acute rejection (AR, new-onset diabetes after transplantation (NODAT and hypertension with tacrolimus relative to ciclosporin at 12 months.The literature search identified 11 RCTs comparing ciclosporin with tacrolimus. Relative to ciclosporin, tacrolimus was associated with significantly improved outcomes in terms of patient mortality (risk ratio [RR] with ciclosporin of 1.26; 95% confidence interval [95%CI] 1.01-1.58. Tacrolimus was superior to ciclosporin in terms of hypertension (RR with ciclosporin 1.26; 95%CI 1.07-1.47, but inferior in terms of NODAT (RR with ciclosporin 0.60; 95%CI 0.47-0.77. There were no significant differences between ciclosporin and tacrolimus in terms of graft loss or AR.Meta-analysis of RCTs published since 2000 showed tacrolimus to be superior to ciclosporin in terms of patient mortality and hypertension, while ciclosporin was superior in terms of NODAT. No significant differences were identified in terms of graft loss or AR. These findings provide further evidence supporting the use of tacrolimus as the cornerstone of immunosuppressive therapy in liver transplant recipients.

Pharmacokinetics of prolonged-release tacrolimus and implications for use in solid organ transplant recipients.

Science.gov (United States)

Tanzi, Maria G; Undre, Nasrullah; Keirns, James; Fitzsimmons, William E; Brown, Malcolm; First, M Roy

2016-08-01

Prolonged-release tacrolimus was developed as a once-daily formulation with ethylcellulose as the excipient, resulting in slower release and reduction in peak concentration (Cmax ) for a given dose compared with immediate-release tacrolimus, which is administered twice daily. This manuscript reviews pharmacokinetic information on prolonged-release tacrolimus in healthy subjects, in transplant recipients converted from immediate-release tacrolimus, and in de novo kidney and liver transplant recipients. As with the immediate-release formulation, prolonged-release tacrolimus shows a strong correlation between trough concentration (Cmin ) and area under the 24-hour time-concentration curve (AUC24 ), indicating that trough whole blood concentrations provide an accurate measure of drug exposure. We present the pharmacokinetic similarities and differences between the two formulations, so that prescribing physicians will have a better understanding of therapeutic drug monitoring in patients receiving prolonged-release tacrolimus. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effects of tacrolimus on action potential configuration and transmembrane ion currents in canine ventricular cells.

Science.gov (United States)

Szabó, László; Szentandrássy, Norbert; Kistamás, Kornél; Hegyi, Bence; Ruzsnavszky, Ferenc; Váczi, Krisztina; Horváth, Balázs; Magyar, János; Bányász, Tamás; Pál, Balázs; Nánási, Péter P

2013-03-01

Tacrolimus is a commonly used immunosuppressive agent which causes cardiovascular complications, e.g., hypertension and hypertrophic cardiomyopathy. In spite of it, there is little information on the cellular cardiac effects of the immunosuppressive agent tacrolimus in larger mammals. In the present study, therefore, the concentration-dependent effects of tacrolimus on action potential morphology and the underlying ion currents were studied in canine ventricular cardiomyocytes. Standard microelectrode, conventional whole cell patch clamp, and action potential voltage clamp techniques were applied in myocytes enzymatically dispersed from canine ventricular myocardium. Tacrolimus (3-30 μM) caused a concentration-dependent reduction of maximum velocity of depolarization and repolarization, action potential amplitude, phase-1 repolarization, action potential duration, and plateau potential, while no significant change in the resting membrane potential was observed. Conventional voltage clamp experiments revealed that tacrolimus concentrations ≥3 μM blocked a variety of ion currents, including I(Ca), I(to), I(K1), I(Kr), and I(Ks). Similar results were obtained under action potential voltage clamp conditions. These effects of tacrolimus developed rapidly and were fully reversible upon washout. The blockade of inward currents with the concomitant shortening of action potential duration in canine myocytes is the opposite of those observed previously with tacrolimus in small rodents. It is concluded that although tacrolimus blocks several ion channels at higher concentrations, there is no risk of direct interaction with cardiac ion channels when applying tacrolimus in therapeutic concentrations.

Tacrolimus concentration/dose ratio as a therapeutic drug monitoring strategy: The influence of gender and comedication

Directory of Open Access Journals (Sweden)

Rančić Nemanja

2015-01-01

Full Text Available Background/Aim. A combination of tacrolimus and other drugs such as corticosteroids has been commonly used immunosuppresive regimens. On the other hand, there is a growing body of evidence that male and female may differ in their response to the equal drug treatment. The aim of the study was to estimated the use of tacrolimus concentration/dose (C/D ratio for the assessment of the influence of gender differences and comedication on tacrolimus exposure in renal transplant recipients. Methods. This prospective case series study included 54 patients, in which the unit of monitoring was outpatient examination (1,872 of the renal transplant patients. The patients were monitored in the period 2010-2014, starting one month after the transplantation. Tacrolimus trough concentrations (TTC were measured by chemiluminescence microparticles immunoassay. Results. TTC and the tacrolimus C/D ratio were significantly lower in the females comparing with the males. Contrary to the males, in the females a significant increase of the tacrolimus daily dose (TDD per body weight and TTC, along with the corticosteroid dose increase, was not accompanied by any significant changes in the tacrolimus C/D ratio; in different corticosteroid doses faster elimination of tacrolimus was found with the exception of the doses > 0.25 mg/kg. In the patients treated with proton pump inhibitors, mainly with pantoprazole TDD per body weight and TTC were significantly higher, while the tacrolimus C/D ratio was significantly lower compared to the patients without this treatment. In the patients treated with calcium channel blockers, TDD per body weight was significantly lower (particularly with amlodipine while the tacrolimus C/D ratio was higher compared to the patients who were not treated by them. Conclusion. A lower tacrolimus exposure was detected in females in comparison to males. When gender differences were considered in the context of different corticosteroid doses, faster

Label-free quantification of Tacrolimus in biological samples by atomic force microscopy

International Nuclear Information System (INIS)

Menotta, Michele; Biagiotti, Sara; Streppa, Laura; Rossi, Luigia; Magnani, Mauro

2015-01-01

Highlights: • Tacrolimus is a potent immunosuppressant drug that has to be continually monitored. • We present an atomic force microscope approach for quantification of Tacrolimus in blood samples. • Detection and quantification have been successfully achieved. - Abstract: In the present paper we describe an atomic force microscopy (AFM)-based method for the quantitative analysis of FK506 (Tacrolimus) in whole blood (WB) samples. Current reference methods used to quantify this immunosuppressive drug are based on mass spectrometry. In addition, an immunoenzymatic assay (ELISA) has been developed and is widely used in clinic, even though it shows a small but consistent overestimation of the actual drug concentration when compared with the mass spectrometry method. The AFM biosensor presented herein utilises the endogen drug receptor, FKBP12, to quantify Tacrolimus levels. The biosensor was first assayed to detect the free drug in solution, and subsequently used for the detection of Tacrolimus in blood samples. The sensor was suitable to generate a dose–response curve in the full range of clinical drug monitoring. A comparison with the clinically tested ELISA assay is also reported

Label-free quantification of Tacrolimus in biological samples by atomic force microscopy

Energy Technology Data Exchange (ETDEWEB)

Menotta, Michele, E-mail: michele.menotta@uniurb.it [Department of Biomolecular Sciences, University of Urbino “Carlo Bo” via Saffi 2, Urbino (Italy); Biagiotti, Sara [Department of Biomolecular Sciences, University of Urbino “Carlo Bo” via Saffi 2, Urbino (Italy); Streppa, Laura [Physics Laboratory, CNRS-ENS, UMR 5672, Lyon (France); Cell and Molecular Biology Laboratory, CNRS-ENS Lyon, UMR 5239, IFR128, Lyon (France); Rossi, Luigia; Magnani, Mauro [Department of Biomolecular Sciences, University of Urbino “Carlo Bo” via Saffi 2, Urbino (Italy)

2015-07-16

Highlights: • Tacrolimus is a potent immunosuppressant drug that has to be continually monitored. • We present an atomic force microscope approach for quantification of Tacrolimus in blood samples. • Detection and quantification have been successfully achieved. - Abstract: In the present paper we describe an atomic force microscopy (AFM)-based method for the quantitative analysis of FK506 (Tacrolimus) in whole blood (WB) samples. Current reference methods used to quantify this immunosuppressive drug are based on mass spectrometry. In addition, an immunoenzymatic assay (ELISA) has been developed and is widely used in clinic, even though it shows a small but consistent overestimation of the actual drug concentration when compared with the mass spectrometry method. The AFM biosensor presented herein utilises the endogen drug receptor, FKBP12, to quantify Tacrolimus levels. The biosensor was first assayed to detect the free drug in solution, and subsequently used for the detection of Tacrolimus in blood samples. The sensor was suitable to generate a dose–response curve in the full range of clinical drug monitoring. A comparison with the clinically tested ELISA assay is also reported.

Tacrolimus-related hypertrophic cardiomyopathy in an adult cardiac transplant patient

Institute of Scientific and Technical Information of China (English)

LIU Tong; DONG Jian-zeng; GAO Yun; GAO Yu-long; CHENG Yu-tong; WANG Su; LI Zhi-zhong; ZHANG Hai-bo; MENG Xu; MA Chang-sheng

2012-01-01

Left ventricular hypertrophy associated with the use of tacrolimus is a rare complication of solid organ transplantation in adult recipients.We present a cardiac transplant recipient who developed severe concentric left ventricular hypertrophy with congestive heart failure related to myocardial hypertrophy on tacrolimus.Hypertrophy improved when the drug was discontinued and replaced with sirolimus.

A Low Concentration of Tacrolimus/Semifluorinated Alkane (SFA) Eyedrop Suppresses Intraocular Inflammation in Experimental Models of Uveitis.

Science.gov (United States)

De Majumdar, S; Subinya, M; Korward, J; Pettigrew, A; Scherer, D; Xu, H

2017-01-01

Corticosteroids remain the mainstay therapy for uveitis, a major cause of blindness in the working age population. However, a substantial number of patients cannot benefit from the therapy due to steroids resistance or intolerance. Tacrolimus has been used to treat refractory uveitis through systemic administration. The aim of this study was to evaluate the therapeutic potential of 0.03% tacrolimus eyedrop in mouse models of uveitis. 0.03% tacrolimus in perfluorobutylpentane (F4H5) (0.03% Tacrolimus/SFA) was formulated using a previously published protocol. Tacrolimus suspended in PBS (0.03% Tacrolimus/PBS) was used as a control. In addition, 0.1% dexamethasone (0.1% DXM) was used as a standard therapy control. Endotoxin-induced uveitis (EIU) and experimental autoimmune uveoretinitis (EAU) were induced in adult C57BL/6 mice using protocols described previously. Mice were treated with eyedrops three times/day immediately after EIU induction for 48 h or from day 14 to day 25 post-immunization (for EAU). Clinical and histological examinations were conducted at the end of the experiment. Pharmacokinetics study was conducted in mice with and without EIU. At different times after eyedrop treatment, ocular tissues were collected for tacrolimus measurement. The 0.03% Tacrolimus/SFA eyedrop treatment reduced the clinical scores and histological scores of intraocular inflammation in both EIU and EAU to the levels similar to 0.1% DXM eyedrop treatment. The 0.03% Tacrolimus/PBS did not show any suppressive effect in EIU and EAU. Pharmacokinetic studies showed that 15 min after topical administration of 0.03% Tacrolimus/SFA, low levels of tacrolimus were detected in the retina (48 ng/g tissue) and vitreous (2.5 ng/ml) in normal mouse eyes, and the levels were significantly higher in EIU eyes (102 ng/g tissue in the retina and 24 ng/ml in the vitreous). Tacrolimus remained detectable in intraocular tissues of EIU eyes 6 h after topical administration (68 ng/g retinal tissue, 10

Different Influences on Tacrolimus Pharmacokinetics by Coadministrations of Zhi Ke and Zhi Shi in Rats

Science.gov (United States)

Lin, Shiuan-Pey; Wu, Ping-Ping; Hou, Yu-Chi; Tsai, Shang-Yuan; Wang, Meng-Ju; Fang, Shih-Hua; Chao, Pei-Dawn Lee

2011-01-01

Tacrolimus, an immunosuppressant with narrow therapeutic window, has been used widely in transplant patients. Grapefruit juice and pomelo have been reported to increase the blood levels of tacrolimus. Zhi Ke and Zhi Shi, the ripe peels and unripe fruits of Citrus aurantium which is chemotaxonomically related to grapefruit and pomelo, are in wide use in clinical Chinese medicine. To investigate the possible interaction of these two Citrus herbs with tacrolimus, male Sprague-Dawley rats were orally given tacrolimus (1.5 mg/kg) with and without Zhi Ke and Zhi Shi decoctions in a cross-over design. Blood samples were withdrawn via cardiopuncture at specific time and quantitated by a microparticle enzyme immunoassay. In addition, to explore the mechanism of interaction, LS 180 cell line was used for the transport study of rhodamine 123, a typical substrate of P-glycoprotein (P-gp). The results showed that Zhi Shi significantly decreased the C max and AUC0−t of tacrolimus by 72.4% and 72.0%, respectively, whereas Zhi Ke did not affect tacrolimus pharmacokinetics. LS 180 cell line study indicated that Zhi Shi increased the efflux activity of P-gp, enabling us to explain the decreased oral bioavailability of tacrolimus caused by Zhi Shi. Hence, we suggest that Zhi Shi be contraindicated for transplant patients treated with tacrolimus to reduce the risk of allograft rejection. PMID:21318106

Different Influences on Tacrolimus Pharmacokinetics by Coadministrations of Zhi Ke and Zhi Shi in Rats

Directory of Open Access Journals (Sweden)

Shiuan-Pey Lin

2011-01-01

Full Text Available Tacrolimus, an immunosuppressant with narrow therapeutic window, has been used widely in transplant patients. Grapefruit juice and pomelo have been reported to increase the blood levels of tacrolimus. Zhi Ke and Zhi Shi, the ripe peels and unripe fruits of Citrus aurantium which is chemotaxonomically related to grapefruit and pomelo, are in wide use in clinical Chinese medicine. To investigate the possible interaction of these two Citrus herbs with tacrolimus, male Sprague-Dawley rats were orally given tacrolimus (1.5 mg/kg with and without Zhi Ke and Zhi Shi decoctions in a cross-over design. Blood samples were withdrawn via cardiopuncture at specific time and quantitated by a microparticle enzyme immunoassay. In addition, to explore the mechanism of interaction, LS 180 cell line was used for the transport study of rhodamine 123, a typical substrate of P-glycoprotein (P-gp. The results showed that Zhi Shi significantly decreased the Cmax⁡ and AUC0-t of tacrolimus by 72.4% and 72.0%, respectively, whereas Zhi Ke did not affect tacrolimus pharmacokinetics. LS 180 cell line study indicated that Zhi Shi increased the efflux activity of P-gp, enabling us to explain the decreased oral bioavailability of tacrolimus caused by Zhi Shi. Hence, we suggest that Zhi Shi be contraindicated for transplant patients treated with tacrolimus to reduce the risk of allograft rejection.

Differences in Peripheral Blood Lymphocytes between Brand-Name and Generic Tacrolimus Used in Stable Liver Transplant Recipients.

Science.gov (United States)

Kim, Jong Man; Kwon, Choon Hyuck David; Joh, Jae-Won; Sinn, Dong Hyun; Choi, Gyu-Seong; Park, Jae Berm; Kang, Eun-Suk; Lee, Suk-Koo

2017-01-01

In this study, peripheral blood lymphocytes were compared between a brand-name and a generic tacrolimus group in stable liver transplant recipients. Sixteen patients who underwent ABO-compatible living donor liver transplants between 2012 and 2013 and had stable graft function were included in this study. Ten patients received brand-name tacrolimus and 6 patients received generic tacrolimus. CD3, CD4, CD8, γδ, CD4+FoxP3+, and CD3-CD56+ T cells were analyzed in peripheral blood obtained preoperatively and 4, 8, 12, and 24 weeks after liver transplantation. Categorical variables were compared using a χ2 test or Fisher exact test, and continuous variables were compared using the Mann-Whitney U test. Regarding the baseline and perioperative characteristics, there were no statistically significant differences between the 2 groups. Immunosuppression also was not different. Subtype analysis of T-cell populations carried out in parallel showed similar levels of CD3, CD4, CD8, and γδT cells with brand-name tacrolimus and generic tacrolimus in stable liver transplant recipients. However, the levels of CD4+Foxp3+ and CD3-CD56+ T cells were higher in the brand-name tacrolimus group than in the generic tacrolimus group 8 weeks after transplantation (p brand-name tacrolimus group than in the generic tacrolimus group after transplantation. This finding showed that brand-name tacrolimus could have more potential immunosuppressive activity than generic tacrolimus regarding the contribution of CD4+Foxp3+ T cells to graft tolerance in liver transplant recipients. © 2017 S. Karger AG, Basel.

Effect of Topical Tacrolimus on Vitiligo in Children

Directory of Open Access Journals (Sweden)

Mohammed Ziaur Rahman Bhuiyan

2016-01-01

Full Text Available Background: Considering safe treatment modalities for children with vitiligo, search for newer therapeutic agents continues. Hence, new immunomodulatory agents such as calcineurinantagonists, frequently referred to as topical immunomodulators (TIMs have recently been introduced as new promising tools to treat acquired hypopigmentary disorders. Tacrolimus is safe in treating children due to lack of skin atrophy and less data are available on effect of topical tacrolimus on vitiligo. Objective: To see the effect of topical tacrolimus on vitiligo in children. Materials and Methods: This prospective study was done in outpatient department of Dermatology and Venereology, Chittagong Medical College Hospital (CMCH, Bangladesh. Clinically diagnosed vitiligo patients of up to 12 years age visiting Skin & VD OPD, CMCH during study period were the study population (total 30. The study was carried out from November 2007 to April 2008. Results: A total of 30 patients, 13 (43.33% males and 17 (56.66% females with focal, segmental or generalized vitiligo were studied. Seventy percent of study subjects were from 7–12 years of age. Topical tacrolimus 0.03% ointment was administered twice daily for 12 weeks to each patient. Repigmentation was complete (>75% in 43.33% cases (13/30, was moderate (50–75% in 33.33% (10/30, mild (<50% in 13.33% (4/30. Clinical adverse effects were noted in 6.67% (2/30 of cases where pruritus was in 3.33% (1/30 and burning in 3.33% (1/30. None of the reactions was severe, all were mild and well-tolerated and most occurred within the first month of initiation of treatment and resolved with continued use of drug and completely cured after the treatment completed. Nobody had to discontinue the therapy for side effects. Conclusion: In conclusion, tacrolimus ointment may be a rapidly efficacious and safe option for the treatment of vitiligo in children. The ease of topical self-administration with minimal side effects makes this novel

Action of tacrolimus on Wistar rat kidneys implanted with Walker 256 carcinosarcoma Estudo da ação do tacrolimus em rins de ratos Wistar implantados com carcinossarcoma de Walker

Directory of Open Access Journals (Sweden)

Cristiano Machado Inácio

2010-02-01

Full Text Available PURPOSE: To evaluate the development of Walker 256 tumor in male Wistar rats treated with tacrolimus using an experimental kidney tumor model. METHODS: 40 male Wistar rats were divided into four groups: Tumor group (TU (n=10, Tacrolimus-Tumor group (TT (n=10, Tacrolimus group (TC (n=10 and Control group (C (n=10. Treatment with tacrolimus was performed in groups TT and TC. Under anesthesia, the right kidney of each animal of TU and TT was accessed through a supraumbilical incision and inoculated with a 0.1mL solution containing 2x10(6 tumor cells (Walker 256 carcinosarcoma tumor cells. Group TC was treated with a saline solution. All the animals of groups TC and TT were treated with tacrolimus (5mg/kg/day by gavage for 15 days. TU group animals received saline by gavage for 15 days. On the 15th postoperative day, all animals were submitted to euthanasia and blood sampling for analysis of serum creatinine (Cr and blood urea nitrogen (BUN. Abdominal gross examination was performed, the right kidney removed and prepared for histological analysis by hematoxylin-eosin staining. The resulting data were submitted to statistical analysis by ANOVA. RESULTS: Statistical significance was found when comparing creatinine level between groups TU, TT and TC -TT group culminated with a marked increased in creatinine levels (Cr=1.013 ± 0.3028 mg/mL, TU group (Cr=0.5670 ± 0.03536 mg/dL P=0.00256, TC group (Cr =0.711 ± 0.1653 mg/mL P= 0.02832. Statistical significance was found when comparing BUN levels in TT group (71.32 ± 17.14 mg/mL, compared with TU group (45.83 ± 5.046 mg/dL, P=0.000318. There were no statistically significant differences between groups TT and TC (61.23 ± 9.503 mg/mL P=0.7242. Histological analysis showed a poor evolution in TT group with multiple foci of hemorrhage and cortical invasion by the Walker tumor. CONCLUSION: The Tacrolimus-treated group developed a more aggressive tumor and a drug-related nephrotoxic effect.OBJETIVO: Avaliar

ATG-Fresenius treatment and low-dose tacrolimus: results of a randomized controlled trial in liver transplantation.

Science.gov (United States)

Benítez, C E; Puig-Pey, I; López, M; Martínez-Llordella, M; Lozano, J J; Bohne, F; Londoño, M C; García-Valdecasas, J C; Bruguera, M; Navasa, M; Rimola, A; Sánchez-Fueyo, A

2010-10-01

We report the results of a prospective randomized controlled trial in liver transplantation assessing the efficacy and safety of antithymocyte globulin (ATG-Fresenius) plus tacrolimus monotherapy at gradually decreasing doses. Patients were randomized to either: (a) standard-dose tacrolimus plus steroids;or (b) peritransplant ATG-Fresenius plus reduced-dose tacrolimus monotherapy followed by weaning of tacrolimus starting 3 months after transplantation. The primary end-point was the achievement of very low-dose tacrolimus (every-other-day or once daily dose with Fresenius group but no benefits in terms of improved renal function, lower metabolic complications or increased prevalence of tolerance-related biomarkers were observed. In conclusion, the use of ATG-Fresenius and tacrolimus at gradually decreasing doses was associated with a high rate of rejection, did not allow for the administration of very low doses of tacrolimus and failed to provide detectable clinical benefits. ClinicalTrials.gov identifier: NCT00436722. © 2010 The Authors Journal compilation © 2010 The American Society of Transplantation and the American Society of Transplant Surgeons.

The carcinogenic potential of tacrolimus ointment beyond immune suppression: a hypothesis creating case report.

Science.gov (United States)

Becker, Jürgen C; Houben, Roland; Vetter, Claudia S; Bröcker, Eva B

2006-01-11

Since tacrolimus ointment was approved by the U.S. Food and Drug Administration (FDA) as a promising treatment for atopic dermatitis, it has been approved in more than 30 additional countries, including numerous European Union member nations. Moreover, in the current clinical routine the use of this drug is no longer restricted to the approved indication, but has been extended to a wide variety of inflammatory skin diseases including some with the potential of malignant transformation. So far, the side-effects reported from the topical use of tacrolimus have been relatively minor (e.g. burning, pruritus, erythema). Recently, however, the FDA reviewed the safety of topical tacrolimus, which resulted in a warning that the use of calcineurin inhibitors may be associated with an increased risk of cancer. Oral lichen planus (OLP) was diagnosed in a 56-year-old women in February 1999. After several ineffective local and systemic therapeutic measures an off-label treatment of this recalcitrant condition using Tacrolimus 0.1% ointment was initiated in May 2002. After a few weeks of treatment most of the lesions ameliorated, with the exception of the plaques on the sides of the tongue. Nevertheless, the patient became free of symptoms which, however, reoccurred once tacrolimus was weaned, as a consequence treatment was maintained. In April 2005, the plaques on the left side of the tongue appeared increasingly compact and a biopsy specimen confirmed the suspected diagnosis of an oral squamous cell carcinoma. The suspected causal relationship between topical use of tacrolimus and the development of a squamous cell carcinoma prompted us to test the notion that the carcinogenicity of tacrolimus may go beyond mere immune suppression. To this end, tacrolimus has been shown to have an impact on cancer signalling pathways such as the MAPK and the p53 pathway. In the given case, we were able to demonstrate that these pathways had also been altered subsequent to tacrolimus therapy.

The carcinogenic potential of tacrolimus ointment beyond immune suppression: a hypothesis creating case report

Directory of Open Access Journals (Sweden)

Vetter Claudia S

2006-01-01

Full Text Available Abstract Background Since tacrolimus ointment was approved by the U.S. Food and Drug Administration (FDA as a promising treatment for atopic dermatitis, it has been approved in more than 30 additional countries, including numerous European Union member nations. Moreover, in the current clinical routine the use of this drug is no longer restricted to the approved indication, but has been extended to a wide variety of inflammatory skin diseases including some with the potential of malignant transformation. So far, the side-effects reported from the topical use of tacrolimus have been relatively minor (e.g. burning, pruritus, erythema. Recently, however, the FDA reviewed the safety of topical tacrolimus, which resulted in a warning that the use of calcineurin inhibitors may be associated with an increased risk of cancer. Case presentation Oral lichen planus (OLP was diagnosed in a 56-year-old women in February 1999. After several ineffective local and systemic therapeutic measures an off-label treatment of this recalcitrant condition using Tacrolimus 0.1% ointment was initiated in May 2002. After a few weeks of treatment most of the lesions ameliorated, with the exception of the plaques on the sides of the tongue. Nevertheless, the patient became free of symptoms which, however, reoccurred once tacrolimus was weaned, as a consequence treatment was maintained. In April 2005, the plaques on the left side of the tongue appeared increasingly compact and a biopsy specimen confirmed the suspected diagnosis of an oral squamous cell carcinoma. Conclusion The suspected causal relationship between topical use of tacrolimus and the development of a squamous cell carcinoma prompted us to test the notion that the carcinogenicity of tacrolimus may go beyond mere immune suppression. To this end, tacrolimus has been shown to have an impact on cancer signalling pathways such as the MAPK and the p53 pathway. In the given case, we were able to demonstrate that these

The carcinogenic potential of tacrolimus ointment beyond immune suppression: a hypothesis creating case report

International Nuclear Information System (INIS)

Becker, Jürgen C; Houben, Roland; Vetter, Claudia S; Bröcker, Eva B

2006-01-01

Since tacrolimus ointment was approved by the U.S. Food and Drug Administration (FDA) as a promising treatment for atopic dermatitis, it has been approved in more than 30 additional countries, including numerous European Union member nations. Moreover, in the current clinical routine the use of this drug is no longer restricted to the approved indication, but has been extended to a wide variety of inflammatory skin diseases including some with the potential of malignant transformation. So far, the side-effects reported from the topical use of tacrolimus have been relatively minor (e.g. burning, pruritus, erythema). Recently, however, the FDA reviewed the safety of topical tacrolimus, which resulted in a warning that the use of calcineurin inhibitors may be associated with an increased risk of cancer. Oral lichen planus (OLP) was diagnosed in a 56-year-old women in February 1999. After several ineffective local and systemic therapeutic measures an off-label treatment of this recalcitrant condition using Tacrolimus 0.1% ointment was initiated in May 2002. After a few weeks of treatment most of the lesions ameliorated, with the exception of the plaques on the sides of the tongue. Nevertheless, the patient became free of symptoms which, however, reoccurred once tacrolimus was weaned, as a consequence treatment was maintained. In April 2005, the plaques on the left side of the tongue appeared increasingly compact and a biopsy specimen confirmed the suspected diagnosis of an oral squamous cell carcinoma. The suspected causal relationship between topical use of tacrolimus and the development of a squamous cell carcinoma prompted us to test the notion that the carcinogenicity of tacrolimus may go beyond mere immune suppression. To this end, tacrolimus has been shown to have an impact on cancer signalling pathways such as the MAPK and the p53 pathway. In the given case, we were able to demonstrate that these pathways had also been altered subsequent to tacrolimus therapy

Effect of concomitant administration of nifedipine and tacrolimus on the development of gingival overgrowth in rats

Directory of Open Access Journals (Sweden)

Sheng-Yi Chen

2015-03-01

Conclusion: Gingival overgrowth could be induced either by nifedipine or by tacrolimus, although the extent of gingival overgrowth induced by tacrolimus would be less than that by nifedipine. However, a concomitant administration of nifedipine and tacrolimus did not aggravate the induced gingival overgrowth.

Cyclosporine versus tacrolimus: cost-effectiveness analysis for renal transplantation in Brazil

Science.gov (United States)

Guerra, Augusto Afonso; Silva, Grazielle Dias; Andrade, Eli Iola Gurgel; Cherchiglia, Mariângela Leal; Costa, Juliana de Oliveira; Almeida, Alessandra Maciel; Acurcio, Francisco de Assis

2015-01-01

OBJECTIVE To analyze the cost-effectiveness of treatment regimens with cyclosporine or tacrolimus, five years after renal transplantation. METHODS This cost-effectiveness analysis was based on historical cohort data obtained between 2000 and 2004 and involved 2,022 patients treated with cyclosporine or tacrolimus, matched 1:1 for gender, age, and type and year of transplantation. Graft survival and the direct costs of medical care obtained from the National Health System (SUS) databases were used as outcome results. RESULTS Most of the patients were women, with a mean age of 36.6 years. The most frequent diagnosis of chronic renal failure was glomerulonephritis/nephritis (27.7%). In five years, the tacrolimus group had an average life expectancy gain of 3.96 years at an annual cost of R$78,360.57 compared with the cyclosporine group with a gain of 4.05 years and an annual cost of R$61,350.44. CONCLUSIONS After matching, the study indicated better survival of patients treated with regimens using tacrolimus. However, regimens containing cyclosporine were more cost-effective. PMID:25741648

An observational study evaluating tacrolimus dose, exposure, and medication adherence after conversion from twice- to once-daily tacrolimus in liver and kidney transplant recipients.

Science.gov (United States)

Bäckman, Lars; Persson, Carl-Axel

2014-03-17

Immunosuppression regimens in transplantation medicine are complex. Drugs with extended release action have simplified medication dosing without affecting efficacy. This prospective, observational, multicenter study, conducted in a routine medical practice setting, evaluated changes in tacrolimus daily dose and trough levels and patient-reported medication adherence at day 90 after 1:1 (mg: mg) conversion to once-daily tacrolimus in adult liver and kidney transplant recipients. Data from 224 recipients of a liver (n=19) or kidney (n=205) transplant, average age 51±14.5 years, were evaluated. The mean change in tacrolimus daily dose was +0.04 mg/day. Dose remained stable after conversion in 62.5%, was lower in 15.6%, and higher in 22% of patients. Trough level after conversion was lower in 62.6% and higher in 36.5%; generally, levels were 12.8% lower than pre-conversion levels. No acute rejection, graft loss, or serious safety events were observed. Two deaths occurred due to myocardial infarction. Conversion helped 19% to less frequently forget medications and 55% reported no difference in remembering to take the once-daily dose after conversion. The change in dosing frequency was identified as "better" for 55%. Tacrolimus daily dose remained stable while trough levels were significantly lower after conversion to once-daily dosing. Safety and efficacy were maintained; reduced dosing frequency had no apparent influence on patient-reported medication adherence.

Open-Label, Randomized Study of Transition From Tacrolimus to Sirolimus Immunosuppression in Renal Allograft Recipients

Science.gov (United States)

Tedesco-Silva, Helio; Peddi, V. Ram; Sánchez-Fructuoso, Ana; Marder, Brad A.; Russ, Graeme R.; Diekmann, Fritz; Flynn, Alison; Hahn, Carolyn M.; Li, Huihua; Tortorici, Michael A.; Schulman, Seth L.

2016-01-01

Background Calcineurin inhibitor–associated nephrotoxicity and other adverse events have prompted efforts to minimize/eliminate calcineurin inhibitor use in kidney transplant recipients. Methods This open-label, randomized, multinational study evaluated the effect of planned transition from tacrolimus to sirolimus on kidney function in renal allograft recipients. Patients received tacrolimus-based immunosuppression and then were randomized 3 to 5 months posttransplantation to transition to sirolimus or continue tacrolimus. The primary end point was percentage of patients with 5 mL/min per 1.73 m2 or greater improvement in estimated glomerular filtration rate from randomization to month 24. Results The on-therapy population included 195 patients (sirolimus, 86; tacrolimus, 109). No between-group difference was noted in percentage of patients with 5 mL/min per 1.73 m2 or greater estimated glomerular filtration rate improvement (sirolimus, 34%; tacrolimus, 42%; P = 0.239) at month 24. Sirolimus patients had higher rates of biopsy-confirmed acute rejection (8% vs 2%; P = 0.02), treatment discontinuation attributed to adverse events (21% vs 3%; P renal function improvement at 24 months is similar for patients with early conversion to sirolimus after kidney transplantation versus those remaining on tacrolimus. PMID:27500260

A simple and highly sensitive on-line column extraction liquid chromatography-tandem mass spectrometry method for the determination of protein-unbound tacrolimus in human plasma samples.

Science.gov (United States)

Bittersohl, Heike; Schniedewind, Björn; Christians, Uwe; Luppa, Peter B

2018-04-27

Therapeutic drug monitoring (TDM) of the immunosuppressive drug tacrolimus is essential to avoid side effects and rejection of the allograft after transplantation. In the blood circulation, tacrolimus is largely located inside erythrocytes or bound to plasma proteins and less than 0.1% is protein-unbound (free). One basic principle of clinical pharmacology is that only free drug is pharmacologically active and monitoring this portion has the potential to better reflect the drug effect than conventional measurements of total tacrolimus in whole blood. To address this, a highly sensitive and straightforward on-line liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed, validated and applied to patient plasma samples. The sample preparation included ultracentrifugation and addition of the stable isotope labeled drug analogue D2,13C-tacrolimus, followed by on-line sample extraction and measurement using a Sciex QTRAP ® 6500 in the multiple reaction monitoring mode. Due to very low concentrations of protein-unbound tacrolimus, it was important to develop a highly sensitive, precise and accurate assay. Here, we first report the efficient formation of tacrolimus lithium adduct ions, which greatly increased assay sensitivity. A lower limit of quantification (LLOQ) of 1 pg/mL (10 fg on column) was achieved and the assay was linear between 1 and 200 pg/mL. There was no carry-over detected. The inaccuracy ranged from -9.8 to 7.4% and the greatest imprecision was 7.5%. The matrix factor was found to be smaller than 1.1%. In summary, this method represents a suitable tool to investigate the potential clinical value of free tacrolimus monitoring in organ transplant recipients. Copyright © 2018 Elsevier B.V. All rights reserved.

Investigation on biological properties of tacrolimus-loaded poly(1,3-trimethylene carbonate) in vitro

Science.gov (United States)

Hou, Ruixia; Wu, Leigang; Wang, Jin; Huang, Nan

2010-06-01

The drug-eluting stents have been regarded as a milestone in inhibiting the restenosis of coronary arteries. However, adverse reactions caused by bare-metal stents and non-biodegradable polymer coatings may result in some clinical problems. In this study, a new tacrolimus-eluting stent coated with biodegradable poly(1,3-trimethylene carbonate) (PTMC) is developed. The structures are characterized by Fourier transform infrared (FTIR) analysis, and the wettability is measured by contact angle assay. The biological behaviors are evaluated by the in vitro platelets adhesion test, APTT test, the human umbilical cord artery smooth muscle cells (HUCASMCs), 4',6-diamidine-2-phenylindole (DAPI) and actin immunofluorescence staining, MTT colorimetric assay. These results show that after blending tacrolimus into PTMC, the anticoagulant behavior is improved, and the adhesion and proliferation of HUCASMCs on samples are inhibited. This work aims to find one kind of surface erosion biodegradable polymers that can be applied as drug-eluting stent coatings.

HEMOFILTRATION AND COUPLED PLASMA FILTRATION ADSORPTION IMPACT ON TACROLIMUS BLOOD CONCENTRATION IN RENAL TRANSPLANT RECIPIENTS

Directory of Open Access Journals (Sweden)

A.V. Vatazin

2014-01-01

Full Text Available Aim. To study the effect of hemofi ltration and coupled plasma fi ltration adsorption on tacrolimus blood concentration in renal transplant recipients.Methods and results. The study included 8 renal transplant recipients. In these patients immediately after the operation was performed the coupled plasma fi ltration adsorption with hemofiltration using a cartridge Mediasorb to reduce the severity of reperfusion injury. We have found that during this extracorporeal blood correction procedure there was statistically not signifi cant decrease of tacrolimus blood concentration. However, concentration of tacrolimus remained in the therapeutic range even after the procedure and it was not signifi cantly different from the control point С0.Conclusion. Coupled plasma fi ltration adsorption is safe in renal transplant recipients and has no signifi cant impact on tacrolimus blood concentration. However, the downward trend in the concentration of tacrolimus in the course of these procedures, especially in continuous or semicontinuous mode, as well as in patients with low hematocrit and hypoalbuminemia, requires individual monitoring.

Sirolimus Versus Tacrolimus as Primary Immunosuppressant After Renal Transplantation: A Meta-Analysis and Economics Evaluation.

Science.gov (United States)

Liu, Jin-Yu; Song, Ming; Guo, Min; Huang, Feng; Ma, Bing-Jun; Zhu, Lan; Xu, Gang; Li, Juan; You, Ru-Xu

Sirolimus and tacrolimus are the major immunosuppressants for renal transplantation. Several studies have compared these 2 drugs, but the outcomes were not consistent. The aim of this study was to evaluate the efficacy, safety, and pharmacoeconomics of sirolimus and tacrolimus in the treatment of renal transplantation and provide evidence for the selection of essential drugs. Trials were identified through a computerized literature search of PubMed, EMBASE, Cochrane controlled trials register, Cochrane Renal Group Specialized Register of randomized controlled trials, and Chinese Biomedical database. Two independent reviewers assessed trials for eligibility and quality and then extracted data. Data were extracted for patient and graft mortality, acute rejection (AR), and adverse events. Dichotomous outcomes were reported as relative risk with 95% confidence intervals. A decision tree model was populated with data from a literature review and used to estimate costs and QALYs gained and incremental cost-effectiveness. Altogether, 1189 patients from 8 randomized controlled trials were included. The results of our analysis were that tacrolimus reduced the risks after renal transplantation of AR and patient withdrawn. Nevertheless, tacrolimus increased the risk of infection. Pharmacoeconomic analysis showed that tacrolimus represented a more cost-effective treatment than does cyclosporine for the prevention of adverse events after renal transplant. Tacrolimus is an effective and safe immunosuppressive agent, and it may be more cost-effective than cyclosporine for the primary prevention of AR in renal transplant recipients. However, it should be noted that such superiority was reversal when the cost of sirolimus and tacrolimus changed.

Tacrolimus drug level and response to treatment in idiopathic childhood steroid resistant nephrotic syndrome

International Nuclear Information System (INIS)

Shah, S.S.; Hafeez, F.; Akhtar, N.

2015-01-01

The management of Steroid Resistant Nephrotic Syndrome (SRNS) is an uphill task for paediatric nephrologists as immunosuppressive agents are the mainstay of treatment in these patients. Tacrolimus is used along with steroids. This study is conducted to see the relationship between the tacrolimus dose, drug level and response in the management of SRNS. Methods: This quasi experimental study was conducted at The Childrens Hospital Lahore over a period of one year. Patients with SRNS of either sex and 1-10 years of age were included and those with secondary nephrotic syndrome were excluded. Tacrolimus was given at a dose of 0.05-0.1 mg/kg/day in 2 divided doses along with steroids. The follow-up was done for six months with proteinuria monitoring and tacrolimus drug levels done two weeks after initiation of treatment. Results: Out of 42 patients, 27 (64.3%) were males and 15 (35.7%) were females. The most common histological diagnosis observed was mesangio-proliferative glomerulonephritis in 30 (71.4%) patients. The tacrolimus trough level range was 0.5-15.20 ng/ml with a mean value of 4.68 ng/ml±2.85. Forty-one (97.6%) children showed complete response to treatment while one patient showed partial response. Conclusion: This study suggests that tacrolimus is an effective drug for treatment of SRNS in paediatric patients and there is no linear relationship between the drug dose, response and drug level. (author)

Tacrolimus treatment of atopic eczema/dermatitis syndrome.

Science.gov (United States)

Thestrup-Pedersen, Kristian

2003-10-01

Atopic dermatitis is today the most common chronic disease of children in Europe, the US and Japan. The 'golden standard' of therapy is topical glucocorticosteroids and emollients. The steroids have been on the market for four decades, are efficacious, but only advised for short-term treatment due to their risks of side effects. More than 16,000 persons suffering from atopic dermatitis have been enrolled in clinical studies of tacrolimus. One third of patients with moderate to severe atopic dermatitis experience over 90% improvement in their disease over a 12-week treatment period and up to 70% of patients have over 50% improvement. A 1-year treatment leads to more than 90% improvement in 75% of patients. The most pronounced side effect is a burning sensation occurring in up to 60% of patients. Atopic dermatitis is a chronic skin disease leading to a demand for long-term treatment control. Such treatment options have not previously been available--except for emollients which are not efficacious for controlling skin inflammation. Tacrolimus and pimecrolimus are new treatment options, free from the potential side effects of topical steroids, which are known for their efficacy in short-term treatment. The new treatment modalities prevent the eczema from relapsing and at the same time they control active eczema. The future will see a shift towards the long-term use of tacrolimus which is able to control the skin inflammation and, hopefully, shorten the course of the eczema.

The onset risk of carcinoma in patients continuing tacrolimus topical treatment for oral lichen planus: a case report.

Science.gov (United States)

Morita, Mayu; Asoda, Seiji; Tsunoda, Kazuyuki; Soma, Tomoya; Nakagawa, Taneaki; Shirakawa, Masayori; Shoji, Hirofumi; Yagishita, Hisao; Nishikawa, Takeji; Kawana, Hiromasa

2017-04-01

Oral lichen planus is a chronic inflammatory mucocutaneous disease. Topical use of steroids and other immuno-modulating therapies have been tried for this intractable condition. Nowadays, tacrolimus ointment is used more commonly as a choice for treatment. However, a number of discussions have taken place after tacrolimus was reported to be carcinogenic. This report describes a patient who applied tacrolimus ointment to the lower lip after being diagnosed with oral lichen planus in 2008, and whose lesion developed squamous cell carcinoma in 2010. Since the relationship between tacrolimus and cancer development has been reported in only a few cases, including this case report, the clinician must be careful selecting tacrolimus as a second-line treatment for oral lichen planus.

The Pharmacogenetics of Tacrolimus in Corticosteroid-Sparse Pediatric and Adult Kidney Transplant Recipients

DEFF Research Database (Denmark)

Juul Madsen, Mads; Bergmann, Troels K; Brøsen, Kim

2017-01-01

INTRODUCTION: Tacrolimus is a calcineurin inhibitor used as an immunosuppressant drug in solid organ transplantation, and is mainly metabolized by cytochrome P450 (CYP) 3A4 and CYP3A5. Studies have shown an association between the CYP3A5 genotype and tacrolimus dose-adjusted trough concentrations...

Topical tacrolimus solution in autoimmune polyglandular syndrome-1-associated keratitis.

Science.gov (United States)

Shoughy, Samir S; Tabbara, Khalid F

2017-09-01

To evaluate the efficacy of topical tacrloimus eye drops in the treatment of keratitis associated with autoimmune polyglandular syndrome (APS)-1. This is a retrospective review of 10 patients with APS-1. The patients were treated with topical tacrolimus 0.01% solution at The Eye Center, between 1 March 2012 and 30 April 2016. The outcome measures included improvement in visual acuity, photophobia and keratitis following treatment. Clinical assessment was carried out before, during and on the last visit following initiation of therapy. A total of 10 patients were included. There were five male and five female patients. The mean age was 11 years with age range of 3-42 years. The mean duration of treatment with topical tacrolimus was 26 months (range 8-46 months). There was improvement of photophobia in 7 out of 10 patients following therapy with topical tacrolimus. In three patients, the photophobia was persistent. There was no clinically detectable improvement in the severity of keratitis in all patients. The mean best corrected visual acuity was 0.1 before and following therapy. Topical tacrolimus is effective in reducing the photophobia in patients with APS-1-associated keratitis, but showed no effects on the severity of keratitis. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Pharmacokinetics of a self-microemulsifying drug delivery system of tacrolimus.

Science.gov (United States)

von Suesskind-Schwendi, Marietta; Gruber, Michael; Touraud, Didier; Kunz, Werner; Schmid, Christof; Hirt, Stephan W; Lehle, Karla

2013-07-01

This study evaluated the pharmacokinetics of tacrolimus (Tac) in a novel self-microemulsifying drug delivery system (SMEDDS) for improved oral administration. SMEDDS Tac consisted of ethyl oleate as the oily phase, Solutol HS 15 as the surfactant and glycofurol as the co-surfactant and contained 0.5mg/mL tacrolimus. Blood and tissue concentrations of tacrolimus from two study groups (oral application of SMEDDS Tac and Prograf®) were determined using ELISA technique following tacrolimus administration in rats. There was no difference between area under the whole blood concentration-time curve in the SEDDM Tac group and the Prograf® group. Maximum concentrations of the drug were three times higher (P<0.05) in the SEDDM Tac group accompanied by a 3-fold earlier peak time. Elimination half-life was significantly lower in the SEDDM Tac group. Application of SMEDDS Tac increased tissue accumulation. Already after 15 min, Tac levels of small intestine, liver, kidney, spleen, heart and bone marrow were significantly higher in the SMEDDS Tac group than in the Prograf® group (P<0.05). However, the Tac concentration in the kidney was significantly lower in the SMEDDS Tac group. Formulation of SMEDDS did not affect blood-brain barrier function. The SMEDDS is a potentially useful method for a local delivery of Tac to target organs. The selection of the optimum SMEDDS Tac composition might have advantage as an alternative oral dosage form for Tac. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Ação do tacrolimus na pancreatite aguda experimental induzida pela arginina

Directory of Open Access Journals (Sweden)

Marlus Moreira

Full Text Available OBJETIVO: verificar se o tacrolimus administrado em ratos, em vigência de pancreatite induzida pela L-Arginina, interfere nos níveis séricos da amilase e glicose e no padrão histológico do parênquima pancreático. MÉTODOS: quarenta ratos Wistar foram distribuídos em quatro grupos com 10 ratos cada. Grupo controle (C, grupo tacrolimus (T, grupo pancreatite (P e grupo pancreatite-tacrolimus (PT. Foram avaliados os níveis séricos de amilase, glicose e tacrolimus e feitas avaliações histológicas do pâncreas, A indução de pancreatite foi feita pela inoculação de L-Arginina na dose de 500mg/100g de peso corporal por via intraperitoneal e o tratamento com tacrolimus na dose de 1ìg/kg por via subcutânea durante quatro dias. RESULTADOS: a amilasemia estava mais elevada (p=0,0000 nos grupos PT, T e P do que no grupo controle. A média do grupo PT foi maior (p=0,0009 que a do grupo T, mas não diferiu (p=0,6802 da média do grupo P. Entre os grupos P e T não houve diferença (p=0,2568. Não houve diferença nas médias de glicemia entre os grupos (p=0,4920 e os níveis séricos de tacrolimus foram similares nos grupos PT e T (p=0,7112. Não ocorreram alterações histológicas nos grupos T e C e não ocorreu hemorragia no pâncreas dos ratos dos grupos P e PT. No grupo P, em 30% não se observou edema, em 20% observou-se a forma leve e em 50%, a moderada; quanto à infiltração inflamatória, em 80% moderada e em 20% não ocorreu, e a atrofia do parênquima foi de 60% moderada e 40% acentuada. No grupo PT, houve ocorrência de edema, infiltração inflamatória e atrofia do pâncreas em todos os ratos. CONCLUSÃO: o tratamento pelo tacrolimus induziu aumento nos níveis séricos de amilase em ratos normais, não alterou a glicemia nem o padrão histológico do parênquima pancreático. Na vigência de pancreatite induzida pela L-Arginina o tacrolimus induziu edema, infiltração inflamatória e atrofia com maior gravidade no par

Association of the multidrug resistance-1 gene single-nucleotide polymorphisms with the tacrolimus dose requirements in renal transplant recipients.

Science.gov (United States)

Anglicheau, Dany; Verstuyft, Céline; Laurent-Puig, Pierre; Becquemont, Laurent; Schlageter, Marie-Hélène; Cassinat, Bruno; Beaune, Philippe; Legendre, Christophe; Thervet, Eric

2003-07-01

The immunosuppressive drug tacrolimus, whose pharmacokinetic characteristics display large interindividual variations, is a substrate for P-glycoprotein (P-gp), the product of the multidrug resistance-1 (MDR1) gene. Some of the single nucleotide polymorphisms (SNP) of MDR1 reported correlated with the in vivo activity of P-gp. Because P-gp is known to control tacrolimus intestinal absorption, it was postulated that these polymorphisms are associated with tacrolimus pharmacokinetic variations in renal transplant recipients. The objective of this study was to evaluate in a retrospective study of 81 renal transplant recipients the effect on tacrolimus dosages and concentration/dose ratio of four frequent MDR1 SNP possibly associated with P-gp function (T-129C in exon 1b, 1236C>T in exon 12, 2677G>T,A in exon 21, and 3435C>T in exon 26). As in the general population, the SNP in exons 12, 21, and 26 were frequent (16, 17.3, and 22.2% for the variant homozygous genotype, respectively) and exhibited incomplete linkage disequilibrium. One month after tacrolimus introduction, exon 21 SNP correlated significantly with the daily tacrolimus dose (P < or = 0.05) and the concentration/dose ratio (P < or = 0.02). Tacrolimus dose requirements were 40% higher in homozygous than wild-type patients for this SNP. The concentration/dose ratio was 36% lower in the wild-type patients, suggesting that, for a given dose, their tacrolimus blood concentration is lower. Haplotype analysis substantiated these results and suggested that exons 26 and 21 SNP may be associated with tacrolimus dose requirements. Genotype monitoring of the MDR1 gene reliably predicts the optimal dose of tacrolimus in renal transplant recipients and may predict the initial daily dose needed by individual patients to obtain adequate immunosuppression.

The calcineurin activity profiles of cyclosporin and tacrolimus are different in stable renal transplant patients

DEFF Research Database (Denmark)

Koefoed-Nielsen, PB; Karamperis, N; Hojskov, C

2006-01-01

Cyclosporin and tacrolimus remain the cornerstone immunosuppressive drugs in organ transplantation. Dosing and monitoring these drugs is based on pharmacokinetic protocols, but measuring a pharmacodynamic parameter, calcineurin phosphatase (CaN) activity, could be a valuable supplement...... in determining optimal doses. Forty stable renal transplant patients were investigated three times in a 6-month period. Blood samples were drawn at 0, 1, 2, 3 and 4 h after oral intake of tacrolimus (FK) or cyclosporin at days 1 and 180. At day 90, one blood sample at trough level (FK) or C2 level (cyclosporin A...... at days 1 and 180 were the same for both drugs. Furthermore, we found that patients treated with tacrolimus or cyclosporin displayed different calcineurin activity profiles. We found that cyclosporin displayed greater calcineurin inhibition than tacrolimus. We have demonstrated that the two drugs exert...

Manic-Like Psychosis Associated with Elevated Trough Tacrolimus Blood Concentrations 17 Years after Kidney Transplant

Directory of Open Access Journals (Sweden)

Giuseppe Bersani

2013-01-01

Full Text Available Several neurological side effects induced by tacrolimus are described in the scientific literature, ranging from mild neurological symptoms to delirium and psychosis. We report the case of a 46-year-old man with no prior psychiatric history who suddenly manifested manic-like psychosis associated with elevated trough tacrolimus blood concentrations 17 years after kidney transplant. The use of antipsychotics may improve the severity of symptoms; but in order to obtain a complete remission, the reduction in the dose of tacrolimus, or its replacement with alternative immunosuppressant therapies, is recommended.

Tacrolimus Versus Cyclosporine as Primary Immunosuppressant After Renal Transplantation: A Meta-Analysis and Economics Evaluation.

Science.gov (United States)

Liu, Jin-Yu; You, Ru-Xu; Guo, Min; Zeng, Lu; Zhou, Pu; Zhu, Lan; Xu, Gang; Li, Juan; Liu, Dong

2016-01-01

Tacrolimus and cyclosporine are the major immunosuppressants for renal transplantation. Several studies have compared these 2 drugs, but the outcomes were not consistent. The aim of this study was to evaluate the efficacy, safety, and pharmacoeconomics of cyclosporine and tacrolimus in the treatment of renal transplantation and provide evidence for the selection of essential drugs. Trials were identified through a computerized literature search of PubMed, EMBASE, Cochrane Controlled Trials Register, Cochrane Renal Group Specialized Register of randomized controlled trials, and Chinese Biomedical database. Two independent reviewers assessed trials for eligibility and quality and then extracted data. Data were extracted for patient and graft mortality, acute rejection, and adverse events. Dichotomous outcomes were reported as relative risk with 95% confidence intervals. A decision tree model was populated with data from a literature review and used to estimate costs and quality-adjusted life years gained and incremental cost-effectiveness. Altogether, 6137 patients from 27 randomized controlled trials were included. The results of our analysis were that tacrolimus reduced the risks after renal transplantation of patient mortality, graft loss, acute rejection, and hypercholesterolemia. Nevertheless, tacrolimus increased the risk of new-onset diabetes. Pharmacoeconomic analysis showed that tacrolimus represented a more cost-effective treatment than does cyclosporine for the prevention of adverse events following renal transplant. Tacrolimus is an effective and safe immunosuppressive agent and it may be more cost-effective than cyclosporine for the primary prevention of graft rejection in renal transplant recipients. However, new-onset diabetes should be closely monitored during the medication period.

Probable tacrolimus toxicity from tibolone co-administration in a woman: a case report

Directory of Open Access Journals (Sweden)

Clark Carolyn J

2010-08-01

Full Text Available Abstract Introduction Tibolone is a synthetic steroid, used with increasing frequency to treat symptoms of menopause, including patients with solid-organ transplants who are taking concurrent immune suppression. To the best of our knowledge, there are no reported drug interactions between tibolone and tacrolimus, one of the principal immune suppressants used in kidney transplantation. Case presentation We report the case of a 49-year-old Caucasian woman who had received a kidney transplant and who developed acute kidney injury secondary to tacrolimus toxicity 10 days after starting tibolone therapy. No alternative causes were found. Tibolone is known to be a weak competitive inhibitor of CYP3A4, which is involved in tacrolimus metabolism. Conclusions Despite a careful evaluation, no alternative reason was found for the acute kidney injury, and her kidney function returned to the previous baseline within several days of cessation of the medication, and with no other specific treatment. Using the Drug Interaction Probability Scale we conclude that she experienced a probable drug interaction. We believe that transplant clinicians should utilise frequent therapeutic drug monitoring of tacrolimus in patients starting or stopping tibolone therapy.

Comparison between the efficacy of microneedling combined with 5-fluorouracil vs microneedling with tacrolimus in the treatment of vitiligo.

Science.gov (United States)

Mina, Mary; Elgarhy, Lamia; Al-Saeid, Hanan; Ibrahim, Zeinab

2018-03-12

Several treatment modalities had been used for the treatment of vitiligo, but the optimal treatment has not yet been identified. To study the efficacy of microneedling with 5-flurouracil vs its efficacy with tacrolimus in the treatment of vitiligo. Twenty-five patients with vitiligo were subjected to microneedling of 2 patches of vitiligo with dermapen, then application of 5-fluorouracil to 1 patch and tacrolimus on the other patch. This procedure was repeated every 2 weeks for every patient for maximum 6 months (12 sessions). The patients were followed up for 3 months after the last session. The overall repigmentation was significantly higher in 5-fluorouracil-treated patches compared with tacrolimus. Excellent improvement occurred in 48% of 5- flurouracil-treated patches while only in 16% of tacrolimus-treated patches. In the acral parts, 40% of the patches treated with 5-fluorouracil achieved excellent improvement (repigmentation >75%), while no patch in the acral parts achieved excellent improvement with tacrolimus. However, there was significant difference between the 2 drugs,regarding inflammation, ulceration, and hyperpigmentation which occurred with 5-fluorouracil. Microneedling combined with 5-fluorouracil or tacrolimus is safe and effective treatment of vitiligo. However, 5-fluorouracil achieved a greater percentage of repigmentation than tacrolimus particularly in the acral parts. © 2018 Wiley Periodicals, Inc.

Erratic tacrolimus exposure, assessed using the standard deviation of trough blood levels, predicts chronic lung allograft dysfunction and survival.

Science.gov (United States)

Gallagher, Harry M; Sarwar, Ghulam; Tse, Tracy; Sladden, Timothy M; Hii, Esmond; Yerkovich, Stephanie T; Hopkins, Peter M; Chambers, Daniel C

2015-11-01

Erratic tacrolimus blood levels are associated with liver and kidney graft failure. We hypothesized that erratic tacrolimus exposure would similarly compromise lung transplant outcomes. This study assessed the effect of tacrolimus mean and standard deviation (SD) levels on the risk of chronic lung allograft dysfunction (CLAD) and death after lung transplantation. We retrospectively reviewed 110 lung transplant recipients who received tacrolimus-based immunosuppression. Cox proportional hazard modeling was used to investigate the effect of tacrolimus mean and SD levels on survival and CLAD. At census, 48 patients (44%) had developed CLAD and 37 (34%) had died. Tacrolimus SD was highest for the first 6 post-transplant months (median, 4.01; interquartile range [IQR], 3.04-4.98 months) before stabilizing at 2.84 μg/liter (IQR, 2.16-4.13 μg/liter) between 6 and 12 months. The SD then remained the same (median, 2.85; IQR, 2.00-3.77 μg/liter) between 12 and 24 months. A high mean tacrolimus level 6 to 12 months post-transplant independently reduced the risk of CLAD (hazard ratio [HR], 0.74; 95% confidence interval [CI], 0.63-0.86; p < 0.001) but not death (HR, 0.96; 95% CI, 0.83-1.12; p = 0.65). In contrast, a high tacrolimus SD between 6 and 12 months independently increased the risk of CLAD (HR, 1.46; 95% CI, 1.23-1.73; p < 0.001) and death (HR, 1.27; 95% CI, 1.08-1.51; p = 0.005). Erratic tacrolimus levels are a risk factor for poor lung transplant outcomes. Identifying and modifying factors that contribute to this variability may significantly improve outcomes. Copyright © 2015 International Society for Heart and Lung Transplantation. Published by Elsevier Inc. All rights reserved.

Impact of the CYP3A5*1 Allele on the Pharmacokinetics of Tacrolimus in Japanese Heart Transplant Patients.

Science.gov (United States)

Uno, Takaya; Wada, Kyoichi; Matsuda, Sachi; Terada, Yuka; Oita, Akira; Kawase, Atsushi; Takada, Mitsutaka

2018-04-24

Tacrolimus, a major immunosuppressant used after transplantation, is associated with large interindividual variation involving genetic polymorphisms in metabolic processes. A common variant of the cytochrome P450 (CYP) 3A5 gene, CYP3A5*3, affects blood concentrations of tacrolimus. However, tacrolimus pharmacokinetics at the early stage of transplantation have not been adequately studied in heart transplantation. We retrospectively examined the impact of the CYP3A5 genotype on tacrolimus pharmacokinetics at the early stage of heart transplantation. The tacrolimus pharmacokinetic profile was obtained from 65 patients during the first 5 weeks after heart transplantation. Differences in the patients' characteristics and tacrolimus pharmacokinetic parameters between the CYP3A5 expresser (*1/*1 or *1/*3 genotypes) and non-expresser (*3/*3 genotype) groups were assessed by the Chi-square test, Student's t test, or Mann-Whitney U test. The CYP3A5 *1/*1, *1/*3, and *3/*3 genotypes were detected in 5, 22, and 38 patients, respectively. All patients started clotrimazole therapy approximately 1 week after starting tacrolimus. Apparent clearance and dose/weight to reach the target trough concentration (C 0 ) were significantly higher in the expresser group than in the non-expresser group (0.32 vs. 0.19 L/h/kg, p = 0.0003; 0.052 vs. 0.034 mg/kg/day, p = 0.0002); there were no significant differences in the area under the concentration-time curve from 0 to 12 h (AUC 0-12 ) and concentrations at any sampling time point between the two groups. Similar concentration-time curves for tacrolimus were obtained in the expresser and non-expresser groups by dose adjustment based on therapeutic drug monitoring. These results demonstrate the importance of the CYP3A5 genotype in tacrolimus dose optimization based on therapeutic drug monitoring after heart transplantation.

Efficacy and safety of low-dose topical tacrolimus in vernal keratoconjunctivitis

Directory of Open Access Journals (Sweden)

Shoughy SS

2016-04-01

Full Text Available Samir S Shoughy,1 Mahmoud O Jaroudi,1 Khalid F Tabbara1–3 1The Eye Center and The Eye Foundation for Research in Ophthalmology, 2Department of Ophthalmology, College of Medicine, King Saud University, Riyadh, Saudi Arabia; 3Wilmer Ophthalmological Institute of the Johns Hopkins University School of Medicine, Baltimore, MD, USA Objective: The objective of this study was to evaluate the efficacy and safety of topical low-dose tacrolimus (0.01% solution in patients with vernal keratoconjunctivitis (VKC. Patients and methods: A total of 62 consecutive patients with VKC refractory to conventional treatment were included retrospectively. Tacrolimus 0.01% ophthalmic solution was administered to patients twice daily after discontinuation of all previous topical medications. The duration of treatment ranged from 1 month to 29 months. The clinical symptoms of itching, redness, foreign body sensation, and discharge and the clinical signs of conjunctival hyperemia, conjunctival papillary hypertrophy, limbal infiltration, Trantas dots, and superficial punctate keratopathy were graded as 0 (normal, 1+ (mild, 2+ (moderate, or 3+ (severe. Assessment was carried out before initiation of therapy and on the last visit after treatment. Results: There were 62 patients with VKC comprising 49 male and 13 female patients. The median age was 12 years (range: 5–47 years. The mean visual acuity improved from 20/30 to 20/25 following treatment. There was statistically significant improvement in symptoms of itching (P<0.001, redness (P<0.001, foreign body sensation (P<0.001, and discharge (P<0.001. Statistically significant improvement was also observed in clinical signs of conjunctival hyperemia (P<0.001, limbal infiltration (P<0.001, Trantas dots (P<0.001, superficial punctate keratopathy (P<0.001, and conjunctival papillary hypertrophy (P<0.001. The solution form of tacrolimus was well tolerated. None of the patients developed elevation of intraocular pressure

Tacrolimus-induced thrombotic microangiopathy in orthotopic liver transplant patients: case series of four patients.

Science.gov (United States)

Nwaba, A; MacQuillan, G; Adams, L A; Garas, G; Delriviere, L; Augustson, B; DeBoer, B; Moody, H; Jeffrey, G P

2013-03-01

Thrombotic microangiopathy (TMA) is a potentially fatal complication in solid organ and bone marrow transplant patients, with reported incidence of 0.5-3% and mortality of about 75%. To emphasise the importance of early diagnosis and prompt commencement of therapy results in improved clinical outcomes. A retrospective study of all patients who underwent orthotopic liver transplantation (OLTX) at the Western Australian Liver Transplantation Service from May 1994 to December 2010 was conducted to identify patients who developed tacrolimus-induced TMA. We identified four patients with tacrolimus-induced TMA post-OLTX, derived from a cohort of 104 patients treated with tacrolimus in our institution. The mean age at diagnosis was 40 years, and the mean time of onset was 63 ± 7.5 weeks after OLTX. The indications for OLTX in the four patients were fulminant hepatic failure in three (Wilson disease, paracetamol overdose and post-partum thrombotic thrombocytopenic purpura) and hepatitis C virus-related cirrhosis. All patients had tacrolimus post-OLTX. At diagnosis, tacrolimus was discontinued in all patients, and three of the four patients underwent plasma exchange and all patients improved clinically. Mean duration of follow up was 15 ± 7.5 months. There was no mortality 6 months post-TMA. Early diagnosis with immediate discontinuation or conversion of calcineurin inhibitors and plasma exchange should be offered to OLTX patients with TMA as it results in good outcomes. © 2013 The Authors; Internal Medicine Journal © 2013 Royal Australasian College of Physicians.

Sirolimus Associated with Tacrolimus at Low Doses in Elderly Kidney Transplant Patients: A Prospective Randomized Controlled Trial.

Science.gov (United States)

Kojima, Cristiane Akemi; Nga, Hong Si; Takase, Henrique Mochida; Bravin, Ariane Moyses; Martinez Garcia, Márcia de Fátima Faraldo; Garcia, Paula Dalsoglio; Contti, Mariana Moraes; de Andrade, Luis Gustavo Modelli

2018-06-01

There is no consensus on the best immunosuppressive regimen for elderly renal transplant recipients. The objective of this study was to assess cytomegalovirus infection incidence and kidney transplant outcomes in elderly recipients treated with mammalian target of rapamycin inhibitors sirolimus/ tacrolimus at low doses compared with those receiving tacrolimus/mycophenolate sodium. In this single-center prospective randomized study (Trial Registration No. NCT02683291), kidney transplant recipients over 60 years of age were randomly allocated into 2 groups: tacrolimus-sirolimus (21 patients) and tacrolimus-mycophenolate (23 patients). Cytomegalovirus infection rate and patient survival, biopsy-proven acute rejection, and renal function at 12 months were assessed. Cytomegalovirus infection rate was higher in the mycophenolate group (60.9%) than in the sirolimus group (16.7%; P = .004). The rates of biopsy-proven acute rejection, patient survival, graft survival, and estimated glomerular filtration rate over 12 months did not significantly differ between groups. The incidence of cytomegalovirus infection was significantly lower in the sirolimus group. The use of tacrolimus combined with sirolimus in elderly kidney transplant recipients is safe.

Topical tacrolimus in combination with simulated solar radiation does not enhance photocarcinogenesis in hairless mice

DEFF Research Database (Denmark)

Lerche, C.M.; Philipsen, P.A.; Poulsen, T.

2008-01-01

tacrolimus ointment on squamous cell carcinoma formation in hairless female C3.Cg/TifBomTac immunocompetent mice exposed to solar simulated radiation (SSR). In a first experiment, mice (n = 200) had tacrolimus applied on their dorsal skin three times weekly followed by SSR (2, 4 or 6 standard erythema doses...

A case of tacrolimus-induced encephalopathy after kidney transplantation

Directory of Open Access Journals (Sweden)

Myoung Uk Kim

2011-01-01

Full Text Available We present a case of tacrolimus-induced encephalopathy after successful kidney transplantation. An 11-year-old girl presented with sudden onset of neurologic symptoms, hypertension, and psychiatric symptoms, with normal kidney function, after kidney transplantation. The symptoms improved after cessation of tacrolimus. Magnetic resonance imaging (MRI showed acute infarction of the middle cerebral artery (MCA territory in the right frontal lobe. Three days later, she had normal mental function and maintained normal blood pressure with left hemiparesis. Follow-up MRI was performed on D19, showing new infarct lesions at both cerebral hemispheres. Ten days later, MRI showed further improvement, but brain single photon emission computed tomography (SPECT showed mild reduction of uptake in both the anterior cingulate gyrus and the left thalamus. One month after onset of symptoms, angiography showed complete resolution of stenosis. However, presenting as a mild fine motor disability of both hands and mild dysarthria, what had been atrophy at both centrum semiovale at 4 months now showed progression to encephalomalacia. There are two points of interest in this case. First, encephalopathy occurred after administration of tacrolimus and improved after discontinuation of the drug. Second, the development of right-side hemiplegia could not be explained by conventional MRI; but through diffusion tensor imaging (DTI and diffusion tensor tractography (DTT of white matter tract, visualization was possible.

Effects of Topical Corticosteroid and Tacrolimus on Ceramides and Irritancy to Sodium Lauryl Sulphate in Healthy Skin

DEFF Research Database (Denmark)

Jungersted, Jakob Mutanu; Høgh, Julie Kaae; Hellgren, Lars

2011-01-01

twice daily for one week with betamethasone, tacrolimus, emollient, or left untreated, respectively. After one week each area was challenged with a 24 h sodium lauryl sulphate patch test. The lipids were collected using the cyanoacrylate method and evaluated by high performance thin layer chromatography...... found between treatment regimes. Pretreatment with betamethasone (p = 0.01) or with tacrolimus (p = 0.001) causes a decreased inflammatory response to sodium lauryl sulphate compared with emollient. In conclusion, treatment with betamethasone and tacrolimus has a positive effect on the ceramide...

Once-Daily Tacrolimus Extended-Release Formulation: 1 Year after Conversion in Stable Pediatric Kidney Transplant Recipients

Directory of Open Access Journals (Sweden)

Lars Pape

2011-01-01

Full Text Available It is speculated that a once-daily dosage of immunosuppression can increase adherence and thereby graft survival. Until now, there have been no studies on once-daily use of Tacrolimus extended-release formulation (TAC-ER in children following pediatric kidney transplantation. In 11 stable pediatric kidney recipients >10 years, efficacy, safety, and tolerability of a switch to TAC-ER were observed over one year. Adherence was determined by use of the BAASIS-Scale Interview and comparison of individual variability of Tacrolimus trough levels. Over the observation period, two acute rejections were observed in one girl with nonadherence and repeated Tacrolimus trough levels of 0 ng/m. Beside this, there were no acute rejections in this trial. TAC dose was increased in 3/11 patients and decreased in 2/11 patients within the course of the study. Six patients did not require a dose adjustment. All but one patient had a maximum of 1 dose change during therapy. Mean Tacrolimus dose, trough levels, and Glomerular filtration rates were also stable. Adherence, as measured by BAASIS-Scale Interview and coefficient of variation of Tacrolimus trough levels, was good at all times. It is concluded that conversion to Tac-ER is safe in low-risk children following pediatric kidney transplantation.

Efeito renoprotetor dos flavonoides do vinho na nefrotoxicidade do imunossupressor Tacrolimus Efecto renoprotector de los flavonoides del vino en la nefrotoxicidad del inmunosupresor Tacrolimus Renoprotective effects of wine flavonoids in nephrotoxicity of the immunosuppressant Tacrolimus

Directory of Open Access Journals (Sweden)

Wanessa Teixeira Silva

2011-01-01

Full Text Available OBJETIVO: Verificar o efeito renoprotetor do extrato de Vitis vinifera L na nefrotoxicidade induzida pelo Tacrolimus em estudos experimentais com ratos. MÉTODOS: Pesquisa quantitativa com modelo experimental, na qual foram utilizados ratos Wistar, machos, adultos, pesando entre 250g - 300g, tratados uma vez ao dia por cincodias, por gavagem, conforme segue: Salina (controle, cloreto de sódio 0,1ml; Vitis (Vitis vinifera L 3mg/kg, FK (0,5mg/kg e FK+Vitis (0,5mg/kg + 3mg/kg, respectivamente . A função renal foi avaliada por meio do clearance de creatinina (Clcr/ 100g, método Jaffé e a peroxidação lipídica pela mensuração de peróxidos urinários (PU, FOX-2. RESULTADOS: A administração de FK elevou a excreção de peróxidos e reduziu o clearance de creatinina, e a administração simultânea com Vitis vinifera L protegeu a função renal nesses parâmetros. CONCLUSÃO: Os dados confirmaram a lesão nefrotóxica induzida pelo Tacrolimus e demonstraram o efeito renoprotetor do Vitis Vinifera L.OBJETIVO: Verificar el efecto renoprotector del extracto de Vitis vinifera L en la nefrotoxicidad inducida por el Tacrolimus en estudios experimentales con ratas. MÉTODOS: Investigación cuantitativa con modelo experimental, en la cual fueron utilizadas ratas Wistar, machos, adultos, que pesaban entre 250g - 300g, tratados una vez al dia por cinco días, por alimentación forzada, conforme sigue: Salina (control, cloreto de sodio 0,1ml; Vitis (Vitis vinifera L 3mg/kg, FK (0,5mg/kg e FK+Vitis (0,5mg/kg + 3mg/kg, respectivamente . La función renal fue evaluada por medio del clearance de creatinina (Clcr/ 100g, método Jaffé y la peroxidación lipídica por la mensuración de peróxidos urinarios (PU, FOX-2. RESULTADOS: La administración de FK elevó la excreción de peróxidos y redujo el clearance de creatinina, y la administración simultánea con Vitis vinifera L protegió la función renal en esos parámetros. CONCLUSIÓN: Los datos

15 year experience of tacrolimus application in medical practice

Directory of Open Access Journals (Sweden)

Y. S. Kondratyeva

2016-01-01

Full Text Available The review presents modern literature data on the use of tacrolimus in medical practice. The results of national and international research on the effectiveness and safety of the drug at various dermatoses are presented.

Efficacy and safety of low-dose topical tacrolimus in vernal keratoconjunctivitis.

Science.gov (United States)

Shoughy, Samir S; Jaroudi, Mahmoud O; Tabbara, Khalid F

2016-01-01

The objective of this study was to evaluate the efficacy and safety of topical low-dose tacrolimus (0.01%) solution in patients with vernal keratoconjunctivitis (VKC). A total of 62 consecutive patients with VKC refractory to conventional treatment were included retrospectively. Tacrolimus 0.01% ophthalmic solution was administered to patients twice daily after discontinuation of all previous topical medications. The duration of treatment ranged from 1 month to 29 months. The clinical symptoms of itching, redness, foreign body sensation, and discharge and the clinical signs of conjunctival hyperemia, conjunctival papillary hypertrophy, limbal infiltration, Trantas dots, and superficial punctate keratopathy were graded as 0 (normal), 1+ (mild), 2+ (moderate), or 3+ (severe). Assessment was carried out before initiation of therapy and on the last visit after treatment. There were 62 patients with VKC comprising 49 male and 13 female patients. The median age was 12 years (range: 5-47 years). The mean visual acuity improved from 20/30 to 20/25 following treatment. There was statistically significant improvement in symptoms of itching (P<0.001), redness (P<0.001), foreign body sensation (P<0.001), and discharge (P<0.001). Statistically significant improvement was also observed in clinical signs of conjunctival hyperemia (P<0.001), limbal infiltration (P<0.001), Trantas dots (P<0.001), superficial punctate keratopathy (P<0.001), and conjunctival papillary hypertrophy (P<0.001). The solution form of tacrolimus was well tolerated. None of the patients developed elevation of intraocular pressure, cataract, or infectious keratitis. Low-dose topical tacrolimus 0.01% solution is effective and safe in the management of patients with refractory VKC.

Plaque-Like Sclerodermiform Localized Mucinosis Rapidly Responsive to Topical Tacrolimus

Directory of Open Access Journals (Sweden)

R. Schmaltz

2010-08-01

Full Text Available We report the successful treatment of plaque-like sclerodermiform mucinosis using tacrolimus ointment topically. We present a 70-year-old male with a large chronic erythema and hardening of the nuchal skin and shoulder area. Subjective symptoms were a moderate pruritus and a rather disabling stiffness. A biopsy specimen revealed typical features of lichen myxedematosus. In a subsequent clinical examination, no associated illnesses such as hypothyroidism or gammopathy were found. Since no established therapy exists for this condition, and as there was a lack of response to potent topical glucocorticosteroids, tacrolimus 0.03% ointment was used off-label twice daily. Surprisingly, this resulted in a rapid, almost complete clearance of the skin within three weeks of treatment.

Dyslipidaemia among renal transplant recipients: cyclosporine versus tacrolimus.

Science.gov (United States)

Fazal, Muhammad Asim; Idrees, Muhammad Khalid; Akhtar, Syed Fazal

2014-05-01

To compare new onset dyslipidaemia in live-related renal transplant recipients taking cyclosporine versus tacrolimus after 3 months of therapy. The randomised controlled trial was conducted at the Sindh Institute of Urology and Transplantation (SIUT) Karachi, from September 2010 to April 2011, and included 182 End Stage Renal Disease patients on maintenance haemodialysis with pre-transplant normal lipid profile. The patients, who had live-related renal transplant, were randomly allocated to two equal groups using lottery. Group A received cyclosporine (3 mg/kg) and group B was treated with tacrolimus (0.1 mg/kg). All patients had pre-transplant fasting lipid profile checked when they were on maintenance haemodialysis and 3 months after renal transplantation. Serum fasting lipid profile was collected by taking 5 ml blood by venipuncture after an overnight fast of 9-12 hours. SPSS 10 was used for statistical analyses. Of the 182 patients, 144 (79.1%) were males and 38 (20.9%) were females. The overall mean age was 30.18 +/- 9.57 years, and the mean weight was 54.41 +/- 11.144 kg. Significant difference was not observed between the two groups regarding age and weight of the patients. Dyslipidaemia was found in 115(63.2%) subjects; 61(67%) in group A and 54 (59.3%) in group B. There was no statistical difference (p=0.28) when comparison was done after 3 months of therapy. The occurrence of new onset hyperlipidaemia is similar in renal transplant recipients receiving either cyclosporine or tacrolimus in first 3 months post-transplant, but there is room for more research in this field as dyslipidaemia following successful renal transplantation is a frequent and persistent complication.

The calcineurin activity profiles of cyclosporin and tacrolimus are different in stable renal transplant patients

DEFF Research Database (Denmark)

Koefoed-Nielsen, Pernille Bundgaard; Karamperis, Nikolaos; Jørgensen, Kaj Anker

2006-01-01

in determining optimal doses. Forty stable renal transplant patients were investigated three times in a 6-month period. Blood samples were drawn at 0, 1, 2, 3 and 4 h after oral intake of tacrolimus (FK) or cyclosporin at days 1 and 180. At day 90, one blood sample at trough level (FK) or C2 level (cyclosporin A...... significantly different effects on calcineurin activity in renal transplant patients with stable, well-functioning grafts and that tacrolimus-treated patients can maintain good, stable graft function with minimal CaN inhibition.......Cyclosporin and tacrolimus remain the cornerstone immunosuppressive drugs in organ transplantation. Dosing and monitoring these drugs is based on pharmacokinetic protocols, but measuring a pharmacodynamic parameter, calcineurin phosphatase (CaN) activity, could be a valuable supplement...

Betel Nut Chewing Is Associated With Reduced Tacrolimus Concentration in Taiwanese Liver Transplant Recipients.

Science.gov (United States)

Chen, W-Y; Lee, C-Y; Lin, P-Y; Hsieh, C-E; Ko, C-J; Lin, K-H; Lin, C-C; Ming, Y-Z; Chen, Y-L

2017-03-01

Studies have shown that arecoline, the major alkaloid component of betel nuts, alters the activity of enzymes in the cytochrome P450 (CYP-450) family. Tacrolimus, an immunosuppressant that protects against organ rejection in transplant recipients, not only is mainly metabolized by CYP3A enzymes but also has a narrow therapeutic range. We aimed to investigate whether dose-adjusted blood trough levels of tacrolimus differed over time between betel nut-chewing and non-betel nut-chewing liver transplant recipients. In this retrospective case-control study, 14 active betel nut-using liver recipients were matched at a 1:2 ratio to 28 non-betel nut-using liver recipients by sex, age, graft source, duration of follow-up after liver transplantation, and estimated glomerular filtration rate. Differences in liver function index, renal function index, and dose-adjusted blood trough levels of tacrolimus over an 18-month period were compared between the 2 groups by using the Generalized Estimating Equation approach. Dose-adjusted blood trough levels of tacrolimus tended to be significantly (P = .04) lower in betel nut chewers (mean = 0.81, medium = 0.7, 95% confidence interval [CI] = 0.73 to 0.90) than in nonchewers (mean = 1.12, medium = 0.88, 95% CI = 1.03 to 1.22) during the 18-month study period. However, there was no significant difference in renal and liver function index between the 2 groups. Liver transplant recipients receiving tacrolimus tend to have lower blood trough levels of the drug over time if they chew betel nuts. Copyright © 2016 Elsevier Inc. All rights reserved.

[The therapeutic drug monitoring network server of tacrolimus for Chinese renal transplant patients].

Science.gov (United States)

Deng, Chen-Hui; Zhang, Guan-Min; Bi, Shan-Shan; Zhou, Tian-Yan; Lu, Wei

2011-07-01

This study is to develop a therapeutic drug monitoring (TDM) network server of tacrolimus for Chinese renal transplant patients, which can facilitate doctor to manage patients' information and provide three levels of predictions. Database management system MySQL was employed to build and manage the database of patients and doctors' information, and hypertext mark-up language (HTML) and Java server pages (JSP) technology were employed to construct network server for database management. Based on the population pharmacokinetic model of tacrolimus for Chinese renal transplant patients, above program languages were used to construct the population prediction and subpopulation prediction modules. Based on Bayesian principle and maximization of the posterior probability function, an objective function was established, and minimized by an optimization algorithm to estimate patient's individual pharmacokinetic parameters. It is proved that the network server has the basic functions for database management and three levels of prediction to aid doctor to optimize the regimen of tacrolimus for Chinese renal transplant patients.

Atopic dermatitis: tacrolimus vs. topical corticosteroid use | Langa ...

African Journals Online (AJOL)

Despite this, the US Food and Drug Administration (FDA) black box warning of possible malignancies has resulted in much debate among experts. The main focus of this article is to compare the safety and efficacy of topical corticosteroids to calcineurin inhibitors, particularly tacrolimus. Furthermore, the aim is to evaluate ...

Artificial neural network model for predicting the bioavailability of tacrolimus in patients with renal transplantation

Science.gov (United States)

Thishya, Kalluri; Vattam, Kiran Kumar; Naushad, Shaik Mohammad; Raju, Shree Bhushan

2018-01-01

The objective of the current study was to explore the role of ABCB1 and CYP3A5 genetic polymorphisms in predicting the bioavailability of tacrolimus and the risk for post-transplant diabetes. Artificial neural network (ANN) and logistic regression (LR) models were used to predict the bioavailability of tacrolimus and risk for post-transplant diabetes, respectively. The five-fold cross-validation of ANN model showed good correlation with the experimental data of bioavailability (r2 = 0.93–0.96). Younger age, male gender, optimal body mass index were shown to exhibit lower bioavailability of tacrolimus. ABCB1 1236 C>T and 2677G>T/A showed inverse association while CYP3A5*3 showed a positive association with the bioavailability of tacrolimus. Gender bias was observed in the association with ABCB1 3435 C>T polymorphism. CYP3A5*3 was shown to interact synergistically in increasing the bioavailability in combination with ABCB1 1236 TT or 2677GG genotypes. LR model showed an independent association of ABCB1 2677 G>T/A with post transplant diabetes (OR: 4.83, 95% CI: 1.22–19.03). Multifactor dimensionality reduction analysis (MDR) revealed that synergistic interactions between CYP3A5*3 and ABCB1 2677 G>T/A as the determinants of risk for post-transplant diabetes. To conclude, the ANN and MDR models explore both individual and synergistic effects of variables in modulating the bioavailability of tacrolimus and risk for post-transplant diabetes. PMID:29621269

Pharmacological evaluation of tacrolimus (FK-506 on ischemia reperfusion induced vasculatic neuropathic pain in rats

Directory of Open Access Journals (Sweden)

Sood Shailja

2010-06-01

Full Text Available Abstract Background Ischemia reperfusion (I/R is common in various pathological conditions like diabetic complication, rheumatic arthritis, necrotizing vascular occlusive disease and trauma. Methods We have evaluated the effect of tacrolimus (1, 2 and 3 mg/kg, p.o. for 10 consecutive days on femoral arterial ischemic reperfusion (I/R induced neuropathic pain in rats. Behavioral parameters (i.e. hot plate, radiant heat, acetone drop, tail heat hyperalgesia, tail flick and tail cold allodynia tests were assessed at different time intervals (i.e. 0, 1, 4, 7, 10, 13 and 16th day and biochemical analysis in serum and tissue samples were also performed along with histopathological studies. Results Behavioral pain assessment revealed increase in the paw and tail withdrawal threshold in tacrolimus treated groups against hyperalgesic and allodynic stimuli as compared to the sham control group. We observed a decrease in the serum nitrate and thiobarbituric acid reactive substance (TBARS levels along with reduction in tissue myeloperoxidase (MPO and total calcium levels, whereas, rise in tissue reduced glutathione levels in tacrolimus treated groups. However, significant results were obtained in medium and high dose treated group as compared to sham control group. Histopathological study had revealed the increase in the neuronal edema and axonal degeneration in the I/R group whereas, tacrolimus ameliorate these effects. Conclusion Our results indicate the anti-oxidative, anti-inflammatory and calcium modulatory actions of tacrolimus. Therefore, it can be used as a therapeutic agent for the treatment of vascular inflammatory related neuropathic pain.

Combination of hydrotropic nicotinamide with nanoparticles for enhancing tacrolimus percutaneous delivery

Directory of Open Access Journals (Sweden)

Pan W

2016-08-01

Full Text Available Wenhui Pan, Mengyao Qin, Guoguang Zhang, Yueming Long, Wenyi Ruan, Jingtong Pan, Zushuai Wu, Tao Wan, Chuanbin Wu, Yuehong Xu Department of Pharmaceutics, School of Pharmaceutical Sciences, Sun Yat-sen University, Guangzhou, People’s Republic of China Abstract: Tacrolimus (FK506, an effective immunosuppressant for treating inflammatory skin diseases, hardly penetrates into and through the skin owing to its high hydrophobicity and molecular weight. The aim of this study was to develop a hybrid system based on nicotinamide (NIC and nanoparticles (NPs encapsulating FK506, such as FK506–NPs–NIC, for facilitating percutaneous delivery, which exploited virtues of both NIC and NPs to obtain the synergetic effect. Solubility and percutaneous permeation studies were carried out. The results showed that NIC could increase the solubility and permeability of FK506 and that 20% (w/v NIC presented higher FK506 permeability and was thus chosen as the hydrotropic solution to solubilize FK506 and prepare FK506–NPs–NIC. Hyaluronic acid (HA was chemically conjugated with cholesterol (Chol to obtain amphiphilic conjugate of HA–Chol, which self-assembled NPs in 20% NIC solution containing FK506. The particle size, zeta potential, and morphology of NPs were characterized. The encapsulation efficiency and in vitro percutaneous permeation of NPs were evaluated in the presence and absence of NIC. The results demonstrated that hydrotropic solubilizing FK506 was readily encapsulated into NPs with a higher encapsulation efficiency of 79.2%±4.2%, and the combination of NPs with NIC exhibited a significantly synergistic effect on FK506 deposition within the skin (2.39±0.53 µg/cm2 and penetration through the skin (13.38±2.26 µg/cm2. The effect of the combination of NPs with NIC on drug permeation was further visualized by confocal laser scanning microscope through in vivo permeation studies, and the results confirmed that NPs–NIC synergistically enhanced

Dyslipidaemia among renal transplant recipients: cyclosporine versus tacrolimus

International Nuclear Information System (INIS)

Fazal, M. A.; Idrees, M. K.; Akhtar, S. F.

2014-01-01

Objectives: To compare new onset dyslipidaemia in live-related renal transplant recipients taking cyclosporine versus tacrolimus after 3 months of therapy. Methods: The randomised controlled trial was conducted at the Sindh Institute of Urology and Transplantation (SIUT) Karachi, from September 2010 to April 2011, and included 182 End Stage Renal Disease patients on maintenance haemodialysis with pre-transplant normal lipid profile. The patients, who had live-related renal transplant, were randomly allocated to two equal groups using lottery. Group A received cyclosporine (3mg/kg) and group B was treated with tacrolimus (0.1mg/kg). All patients had pre-transplant fasting lipid profile checked when they were on maintenance haemodialysis and 3 months after renal transplantation. Serum fasting lipid profile was collected by taking 5ml blood by venipuncture after an overnight fast of 9-12 hours. SPSS 10 was used for statistical analyses. Results: Of the 182 patients, 144(79.1%) were males and 38(20.9%) were females. The overall mean age was 30.18+-9.57 years, and the mean weight was 54.41+- 11.144kg. Significant difference was not observed between the two groups regarding age and weight of the patients. Dyslipidaemia was found in 115(63.2%) subjects; 61(67%) in group A and 54(59.3%) in group B. There was no statistical difference (p=0.28) when comparison was done after 3 months of therapy. Conclusions: The occurrence of new onset hyperlipidaemia is similar in renal transplant recipients receiving either cyclosporine or tacrolimus in first 3 months post-transplant, but there is room for more research in this field as dyslipidaemia following successful renal transplantation is a frequent and persistent complication. (author)

Tacrolimus Therapy for Three Patients with Elderly-Onset Ulcerative Colitis: Report of Three Cases

Directory of Open Access Journals (Sweden)

Rumiko Kobayashi

2016-07-01

Full Text Available In recent years, cases of elderly-onset ulcerative colitis (UC have been increasing in number and are currently reported to account for 10–15% of all cases of UC. Although the treatment of UC is essentially similar between older and younger patients, evidence of the therapeutic efficacy of tacrolimus in elderly-onset UC patients is still limited. Herein, we report our attempt to induce remission using tacrolimus in three patients with elderly-onset UC. A 75-year-old Japanese woman, a 71-year-old Japanese man and a 76-year-old Japanese woman with severe elderly-onset UC of the pancolitis type were treated with tacrolimus. Although all three patients showed response to the drug, the eventual outcome was poor in the first patient, who developed toxic megacolon, underwent surgery, and suffered from recurrent infections and hemorrhage after the surgery. However, clinical remission was successfully achieved in the second and third patient. Tacrolimus shows some indication of effectiveness in the treatment of elderly-onset UC. However, in elderly-onset UC patients, it is necessary to keep in mind the higher risk of adverse effects of medical therapy and postoperative complications because of the high comorbidity rates. Moreover, in situations where surgery needs to be considered, it is important to ensure appropriate timing of the surgery.

The calcineurin inhibitor tacrolimus reduces proteinuria in membranous nephropathy accompanied by a decrease in angiopoietin-like-4.

Directory of Open Access Journals (Sweden)

Lei Peng

Full Text Available Tacrolimus is an anticalcineurinic agent with potent immunosuppressive activity that has recently been shown to have the added benefit of reducing proteinuria in membranous nephropathy (MN patients. However, its potential mechanisms remain unknown. To reveal the mechanism, rat cohorts were administered tacrolimus or vehicle from days 7 to 28 after the induction of passive Heymann nephritis (PHN. PHN induction resulted in heavy proteinuria and increased expression of desmin, a marker of injured podocytes. We also showed that the glomerular expression of angiopoietin-like-4 (Angptl4 was markedly upregulated in PHN rats and human MN followed by an increase in urine Angptl4 excretion. In addition, increased Angptl4 expression may be related to podocyte injury and proteinuria. Furthermore, upregulated Angptl4 expression primarily colocalized with podocytes rather than endothelial or mesangial cells, indicating that podocytes may be the source of Angptl4, which then gradually migrated to the glomerular basement membrane over time. However, tacrolimus treatment markedly reduced glomerular and urinary Angptl4, accompanied by a reduction in the established proteinuria and the promotion of podocyte repair. Additionally, glomerular immune deposits and circulating IgG levels induced by PHN clearly decreased following tacrolimus treatment. In conclusion, this is the first demonstration that the calcineurin inhibitor tacrolimus can reduce Angptl4 in podocytes accompanied by a decrease in established proteinuria and promotion of podocyte repair in MN.

Development and Improvement of Simple Colonic Mucosal Ulcer during Treatment of Severe Ulcerative Colitis with Tacrolimus

Directory of Open Access Journals (Sweden)

Ayumi Ito

2017-03-01

Full Text Available Diarrhea, melena, and lower abdominal pain developed in a male in his 20s and colonoscopy showed pancolitis-type severe ulcerative colitis (UC. Treatment was initiated with 4,000 mg of 5-aminosalicylic acid and 60 mg/day of prednisolone, but the symptoms and inflammatory reaction worsened with prednisolone dose reduction. Tacrolimus was added to the treatment, which subsequently induced remission. Serial colonoscopies during the treatment showed improvement in ulcer and mucosal edema throughout the entire large intestine, but a new solitary round ulcer appeared at the end of the ileum. Since no signs of Behçet’s disease were noted, it was considered as a simple ulcer, a complication of UC. Tacrolimus treatment was continued based on continued improvement in clinical features and colonic mucosa, excluding the end of the ileum. Colonoscopy at 6 months after initiation of tacrolimus showed healing of the large intestinal mucosa, although mild congestion was still noted. The solitary round ulcer at the end of the ileum improved to a small erosion. We report the improvement of a simple ulcer that developed during tacrolimus treatment.

Efficacy and safety of tacrolimus ointment compared with that of hydrocortisone acetate ointment in children with atopic dermatitis

NARCIS (Netherlands)

Reitamo, Sakari; van Leent, Edwin J. M.; Ho, Vincent; Harper, John; Ruzicka, Thomas; Kalimo, Kirsti; Cambazard, Frédéric; Rustin, Malcolm; Taïeb, Alain; Gratton, David; Sauder, Daniel; Sharpe, Graham; Smith, Catherine; Jünger, Michael; de Prost, Yves

2002-01-01

Vehicle-controlled studies have demonstrated the efficacy and safety of tacrolimus ointment in the treatment of patients with atopic dermatitis (AD). This study was undertaken to compare 0.03% and 0.1% tacrolimus ointment with 1% hydrocortisone acetate ointment in children 2 to 15 years of age with

Tacrolimus Improves Symptoms of Children With Myasthenia Gravis Refractory to Prednisone.

Science.gov (United States)

Liu, Chanchan; Gui, Mengcui; Cao, Yayun; Lin, Jing; Li, Yue; Ji, Suqiong; Bu, Bitao

2017-12-01

Myasthenia gravis tends to affect children in China. Oral pyridostigmine and prednisone could effectively improve the symptoms, but multiple side effects become a major concern after long-term oral prednisone. To avoid the long-term complications of prednisone therapy and to obtain more satisfactory improvement, we tested the efficacy and safety of tacrolimus in children with myasthenia gravis. Children with myasthenia gravis who had not achieved satisfactory improvement or who experienced severe side effects after prednisone therapy were recruited between January 2015 and December 2016 at Tongji Hospital. All the children were treated with tacrolimus 1 mg to 2 mg daily and the dose was adjusted on the basis of the clinical response and the serum concentration. The dosage of prednisone, the severity of symptoms, blood samples, the serum concentration of tacrolimus, and titers of antiacetylcholine receptor antibodies were evaluated every four weeks. Fourteen children were enrolled. One child withdrew two weeks after the enrollment. Thirteen children have completed the therapy for one year. At the end point, the dosage of prednisone was significantly decreased (P myasthenia gravis score, and myasthenia gravis-specific manual muscle testing and myasthenia gravis-activities of daily living scores were significantly improved (P myasthenia gravis. Randomized clinical trials are needed to confirm the observation. Copyright © 2017 Elsevier Inc. All rights reserved.

Conversion from tacrolimus-mycophenolate mofetil to tacrolimus-mTOR immunosuppression after kidney-pancreas transplantation reduces the incidence of both BK and CMV viremia.

Science.gov (United States)

Knight, Richard J; Graviss, Edward A; Nguyen, Duc T; Kuten, Samantha A; Patel, Samir J; Gaber, Lillian; Gaber, A Osama

2018-04-19

We sought to determine whether conversion from tacrolimus/mycophenolate mofetil (TAC-MMF) into tacrolimus/mTOR inhibitor (TAC-mTOR) immunosuppression would reduce the incidences of BK and CMV viremia after kidney/pancreas (KP) transplantation. In this single-center review, the TAC-mTOR cohort (n = 39) was converted at 1 month post-transplant to an mTOR inhibitor and reduced-dose tacrolimus. Outcomes were compared to a cohort of KP recipients (n = 40) maintained on TAC-MMF. At 3 years post-transplant, KP survivals and incidences of kidney/pancreas rejection were equivalent between mTOR and MMF-treated cohorts. (P = ns). BK viremia-free survival was better for the mTOR vs MMF-treated group (P = .004). In multivariate analysis, MMF vs mTOR immunosuppression was an independent risk factor for BK viremia (hazard ratio 12.27, P = .02). Similarly, mTOR-treated recipients displayed better CMV infection-free survival compared to the MMF-treated cohort (P = .01). MMF vs mTOR immunosuppression (hazard ratio 18.77, P = .001) and older recipient age (hazard ratio 1.13 per year, P = .006) were independent risk factors for CMV viremia. Mean estimated GFR and HgbA1c levels were equivalent between groups at 1, 2, and 3 years post-transplantation. Conversion from TAC/MMF into TAC/mTOR immunosuppression after KP transplantation reduced the incidences of BK and CMV viremia with an equivalent risk of acute rejection and similar renal/pancreas function. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Conservation of small-airway function by tacrolimus/cyclosporine conversion in the management of bronchiolitis obliterans following lung transplantation.

Science.gov (United States)

Revell, M P; Lewis, M E; Llewellyn-Jones, C G; Wilson, I C; Bonser, R S

2000-12-01

We studied serial lung function in 11 patients with bronchiolitis obliterans syndrome who were treated with tacrolimus conversion following lung or heart-lung transplantation. Our results show that tacrolimus conversion slows the decline of lung function in bronchiolitis obliterans syndrome. The attenuation continues for at least 1 year following conversion.

Comparison of Semen Analysis Parametes Changes after Priscription of Two Immunosuppresive Drugs, Tacrolimus and Cyclosporine in Men Undergoing Renal Transplantation

Directory of Open Access Journals (Sweden)

Ali Ramouz

2017-02-01

Full Text Available Background & Objective: The research objective was to investigate the prevalence of infertility in renal transplant patients receiving immunosuppressive agents and compare the impact of tacrolimus (target of Rapamycin inhibitors (TOR-I and Cyclosporine on spermogram parameters after the transplantation. Material & Methods: In this prospective study, from March 2013 to March 2014, all male patient who underwent renal transplantation and were treated with Tacrolimus or Cyclosporine, were included. Patients’ spermogram was analyzed in terms of sperm count and motility. Results: Average sperm count in patients receiving cyclosporine and tacrolimus before the transplantation was 1.73 × 106 and 2.08 × 106 and after the transplantation was 1.2 × 106 and 1.22 × 106, respectively (P=0.008(P=0.002. Average percentage of the motile sperms of patients treated with Cyclosporine, before the transplantation and start of immunosuppressive course was 45.10%, which decreased to 40.50% at the end of the course. The analysis indicated a significant reduction in sperm motility (P=0.001. Average percentage of the motile sperms of patients receiving Tacrolimus, before the transplantation and start of treatment was 46% that decreased to 38% after the transplantation. This finding presents the significantly reduced sperm motility (P=0.002. Finally, the effective sperm motility in patients treated with Cyclosporine was significantly higher than patients treated with Tacrolimus. Conclusion: Tacrolimus reduces sperms’ motility in renal transplant patients significantly higher than Cyclosporine.

Central pontine myelinolysis (CPM) associated with tacrolimus (FK506) after liver transplantation.

Science.gov (United States)

Fukazawa, Kyota; Nishida, Seigo; Aguina, Luz; Pretto, Ernesto

2011-01-01

Central pontine myelinolysis (CPM) is the most detrimental neurologic complication after liver transplantation. The incidence of CPM after liver transplantation ascends to 17%. Although the precise etiology and pathogenesis of CPM is largely unknown, a growing literature implicates a possible role of immunosuppressive agents, such as Cyclosporine (incidence 30%) on its development. Other immunosuppressive agents also can cause CPM but the frequency of these cases is less compared to Cyclosporine. There is only one case report for Tacrolimus (FK506)-associated speech disorder, which might be an atypical presentation of CPM, and no case reports for Rapamycin. We present a case of Tacrolimus induced CPM. A 62-year-old woman who underwent liver transplantation developed clinical symptoms with radiologic evidence consistent with CPM 7 days after liver transplant. Since the electrolytes in this patient remained normal from her admission, the hypothesis of inmunossupressor neurotoxicity was established and the therapy was switched, resulting in an evident clinical and radiological improvement of her condition in the following days. Five months later, the patient's only neurological deficit was slight dysarthria and a follow-up MRI showed no abnormalities. This case provides evidence of Tacrolimus-associated CPM after transplantation, which presented with a classic "lock-in syndrome" with radiographic confirmation.

The relationship between tacrolimus concentration-dose ratio and genetic polymorphism in patients subjected to renal transplantation

Directory of Open Access Journals (Sweden)

Rančić Nemanja

2018-01-01

Full Text Available Background/Aim. Tacrolimus concentration-dose ratio as a potential therapeutic drug monitoring strategy was suggested to be used for the patients subjected to renal transplantation. The aim of this study was examining the relationship between tacrolimus concentration-dose ratio, suggested to be used as a therapeutic drug monitoring strategy and the polymorphisms of genes encoding the most important enzymes, such as CYP3A5 and CYP3A4, as well as the transporter P-glycoprotein, for its metabolism and elimination. Methods. The study was designed as a prospective case series study, in which the unit of monitoring was the outpatient examination of 54 patients subjected to renal transplantation. Genotyping was performed by 7500 Real- Time PCR System by assessing allelic discrimination based on TaqMan® methodology. Results. Patients (n = 13 who were treated with less than 2 mg of tacrolimus/day (0.024 ± 0.006 mg/kg/day had the tacrolimus concentration-dose ratio larger than 150 ng/mL/mg/kg. In this group, 84.62% patients had CYP3А5 *3*3 allele. All of these patients had CYP3А4 *1*1/*1*1B allele. Regarding ABCB1 C3435T gene, 30.77% of patients had the TT gene variant, while 69.23% of our patients had CC and CT gene variants. Conclusion. Tacrolimus concentration-dose ratio greater than 150 ng/mL/mg/kg is cut-off value in patients subjected to renal transplantation which might point to patients who are poor CYP3A5 metabolizers and/or with dysfunctional P-glycoprotein.

Tacrolimus versus cyclosporin as primary immunosuppression for lung transplant recipients

DEFF Research Database (Denmark)

Penninga, Luit; Penninga, Ida Elisabeth Irene; Møller, Christian H

2013-01-01

Lung transplantation is a well-accepted treatment for people with most end-stage lung diseases. Although both tacrolimus and cyclosporin are used as primary immunosuppressive agents in lung transplant recipients, it is unclear which of these drugs is better in reducing rejection and death without...

Progressive necrotic encephalopathy following tacrolimus therapy for liver transplantation.

Science.gov (United States)

Aridon, Paolo; Ragonese, Paolo; Di Benedetto, Norma; Grasso, Giovanni; Conaldi, Pier Giulio; D'Amelio, Marco; Savettieri, Giovanni

2009-12-01

Previously described neurologic damage induced by immunosuppressive treatments includes transient or reversible central nervous system involvement. We describe a 57-year-old man who underwent liver transplantation and was started on immunosuppressive therapy with tacrolimus (FK506). Six months later, he started complaining of a progressive motor and sensory impairment of the left side, together with cognitive impairment. Brain MRI showed an enlarging lesion of the white matter with peripheral contrast enhancement. PET study indicated severe hypometabolism in the right hemisphere and spectroscopic MRI showed a peak of choline and relative reduction of other metabolites. Findings of CSF examinations and cultures, serology, and molecular techniques were normal. Tacrolimus treatment was stopped. A cerebral biopsy of the lesion showed a sub acute necrotizing process. In the following months, cognitive status of the patient tended to improve although he remained hemiplegic, while serial MRI confirmed the tendency to the recovery of the lesion that was still present 1 year after. The present observation describes a progressive encephalopathy associated with immune suppression with an unusual feature and permanent brain damage.

Low-dose tacrolimus combined with donor-derived mesenchymal stem cells after renal transplantation: a prospective, non-randomized study

OpenAIRE

Pan, Guang-hui; Chen, Zheng; Xu, Lu; Zhu, Jing-hui; Xiang, Peng; Ma, Jun-jie; Peng, Yan-wen; Li, Guang-hui; Chen, Xiao-yong; Fang, Jia-li; Guo, Yu-he; Zhang, Lei; Liu, Long-shan

2016-01-01

Calcineurin inhibitors, including tacrolimus, are largely responsible for advances in allotransplantation. However, the nephrotoxicity associated with these immunosuppressants impairs patients' long-term survival after renal allograft. Therefore, novel regimens that minimize or even eliminate calcineurin inhibitors could improve transplantation outcomes. In this pilot study, we investigated the use of low-dose tacrolimus in combination with mesenchymal stem cells (MSCs), which are immunosuppr...

False Elevation of the Blood Tacrolimus Concentration, as Assessed by an Affinity Column-mediated Immunoassay (ACMIA), Led to Acute T Cell-mediated Rejection after Kidney Transplantation.

Science.gov (United States)

Kono, Momoko; Hasegawa, Jumpei; Ogawa, Hina; Yoshikawa, Kanae; Ishiwatari, Ayumi; Wakai, Sachiko; Tanabe, Kazunari; Shirakawa, Hiroki

2018-05-01

Tacrolimus is the most commonly used immunosuppressant. Because of its narrow therapeutic range, it is necessary to frequently monitor its concentration. We report the case of a 25-year-old man who underwent kidney transplantation whose tacrolimus concentrations, as measured by an affinity column-mediated immunoassay, were falsely elevated. As we reduced the dose of tacrolimus, the recipient developed T cell-mediated rejection. Using the same blood samples, an enzyme-multiplied immunoassay technique showed that the patient's levels of tacrolimus were extremely low. A further examination indicated that the false increase in the tacrolimus concentration was likely due to an unknown interfering substance. We administered methylprednisolone and antithymocyte-globulin. The patient's serum creatinine level decreased and remained stable after these treatments.

Tacrolimus increases Nox4 expression in human renal fibroblasts and induces fibrosis-related genes by aberrant TGF-beta receptor signalling.

Directory of Open Access Journals (Sweden)

Georg Kern

Full Text Available Chronic nephrotoxicity of immunosuppressives is one of the main limiting factors in the long-term outcome of kidney transplants, leading to tissue fibrosis and ultimate organ failure. The cytokine TGF-β is considered a key factor in this process. In the human renal fibroblast cell line TK-173, the macrolide calcineurin inhibitor tacrolimus (FK-506 induced TGF-β-like effects, manifested by increased expression of NAD(PH-oxidase 4 (Nox4, transgelin, tropomyosin 1, and procollagen α1(V mRNA after three days. The macrolide mTOR inhibitor rapamycin had similar effects, while cyclosporine A did not induce fibrose-related genes. Concentration dependence curves were sigmoid, where mRNA expression was induced already at low nanomolar levels of tacrolimus, and reached saturation at 100-300 nM. The effects were independent of extracellular TGF-β as confirmed by the use of neutralizing antibodies, and thus most likely caused by aberrant TGF-β receptor signaling, where binding of tacrolimus to the regulatory FKBP12 protein results in a "leaky" TGF-β receptor. The myofibroblast marker α-smooth muscle actin was neither induced by tacrolimus nor by TGF-β1, indicating an incomplete activation of TK-173 fibroblasts under culture conditions. Tacrolimus- and TGF-β1-induced Nox4 protein upregulation was confirmed by Western blotting, and was accompanied by a rise in intracellular H2O2 concentration. Si-RNA mediated knock-down of Nox4 expression prevented up-regulation of procollagen α1(V mRNA in tacrolimus-treated cells, but induced procollagen α1(V expression in control cells. Nox4 knock-down had no significant effect on the other genes tested. TGF-β is a key molecule in fibrosis, and the constant activation of aberrant receptor signaling by tacrolimus might contribute to the long-term development of interstitial kidney fibrosis in immunosuppressed patients. Nox4 levels possibly play a regulatory role in these processes.

Use of tacrolimus in rescue therapy of acute and chronic rejection in liver transplantation Uso de tacrolimus na terapia de resgate de rejeições agudas e crônicas no transplante de fígado

Directory of Open Access Journals (Sweden)

Fabricio Ferreira Coelho

2003-01-01

Full Text Available PURPOSE: To study the indications and results of tacrolimus as rescue therapy for acute cellular or chronic rejection in liver transplantation. PATIENTS AND METHODS: Eighteen liver transplant recipients who underwent rescue therapy with tacrolimus between March 1995 and August 1999 were retrospectively studied. The treatment indication, patients, and graft situation were recorded as of October 31st, 1999. The response to tacrolimus was defined as patient survival with a functional graft and histological reversal of acute cellular, or for chronic rejection, bilirubin serum levels decreasing to up to twice the upper normal limit. RESULTS: Fourteen cases (77.8% presented a good response. The response rate for the different indications was: (1 acute cellular + sepsis - 0/1 case; (2 recurrent acute cellular - 1/1 case; (3 OKT3-resistant acute cellular - 2/2 cases; (4 steroid-resistant acute cellular + active viral infection - 3/3 cases; (5 chronic rejection - 8/11 cases (72.7% response rate. The 4 patients who did not respond died. CONCLUSION: Tacrolimus rescue therapy was successful in most cases of acute cellular and chronic rejection in liver transplantation.OBJETIVO: Estudar os critérios de indicação e o resultado do uso de tacrolimus na terapia de resgate de rejeições agudas ou crônicas no transplante de fígado. CASUÍSTICA E MÉTODO: Foram estudados 18 pacientes transplantados de fígado, submetidos a terapia de resgate com tacrolimus entre março de 1995 e agosto de 1999. Foram registradas a indicação do tratamento e a situação de pacientes e enxertos em 31/10/1999. Considerou-se "respondendores" pacientes vivos, com enxerto funcionante e regressão histológica da terapia de resgate de rejeições agudas, ou com bilirrubina até 2 vezes o valor normal, no caso de terapia de resgate de rejeições crônicas. RESULTADO: Observou-se resposta em 14 casos (77,8%. A taxa de resposta nas diferentes indicações foi: (1 terapia de resgate

An analysis of tacrolimus-related complications in the first 30 days after liver transplantation

Directory of Open Access Journals (Sweden)

Lucas Souto Nacif

2014-11-01

Full Text Available OBJECTIVES: Orthotopic liver transplantation has improved survival in patients with end-stage liver disease; however, therapeutic strategies that achieve ideal immunosuppression and avoid early complications are lacking. To correlate the dose and level of Tacrolimus with early complications, e.g., rejection, infection and renal impairment, after liver transplantation. From November 2011 to May 2013, 44 adult liver transplant recipients were studied in this retrospective comparative study. RESULTS: The most frequent indication for liver transplantation was hepatitis C cirrhosis (47.7%, with a higher prevalence observed in male patients (68.18%. The ages of the subjects ranged from 19-71 and the median age was 55.5 years. The mean length of the hospital stay was 16.1±9.32 days and the mean Model for End-stage Liver Disease score was 26.18±4.28. There were five cases of acute cellular rejection (11.37% and 16 cases of infection (36.37%. The blood samples that were collected and analyzed over time showed a significant correlation between the Tacrolimus blood level and the deterioration of glomerular filtration rate and serum creatinine (p<0.05. Patients with infections had a higher serum level of Tacrolimus (p = 0.012. The dose and presence of rejection were significantly different (p = 0.048 and the mean glomerular filtration rate was impaired in patients who underwent rejection compared with patients who did not undergo rejection (p = 0.0084. CONCLUSION: Blood Tacrolimus levels greater than 10 ng/ml were correlated with impaired renal function. Doses greater than 0.15 mg/kg/day were associated with the prevention of acute cellular rejection but predisposed patients to infectious disease.

A Comparative Evaluation of Efficacy of Tacrolimus and Triamcinolone Acetonide in the Management of Symptomatic Oral Lichen Planus

Directory of Open Access Journals (Sweden)

Y M Swarna

2011-01-01

Interpretation and conclusion Topical tacrolimus 0.03% ointment induced better initial therapeutic response than triamcinolone acetonide 0.1 % ointment. However, relapses occurred in two subjects in group ′A′ and three subjects in group ′B′ after the cessation of the respective treatments. Nevertheless, at present topical tacrolimus may be a valuable addition to the already existing therapeutic modalities for treating subjects with OLP.

Application of Machine-Learning Models to Predict Tacrolimus Stable Dose in Renal Transplant Recipients

Science.gov (United States)

Tang, Jie; Liu, Rong; Zhang, Yue-Li; Liu, Mou-Ze; Hu, Yong-Fang; Shao, Ming-Jie; Zhu, Li-Jun; Xin, Hua-Wen; Feng, Gui-Wen; Shang, Wen-Jun; Meng, Xiang-Guang; Zhang, Li-Rong; Ming, Ying-Zi; Zhang, Wei

2017-02-01

Tacrolimus has a narrow therapeutic window and considerable variability in clinical use. Our goal was to compare the performance of multiple linear regression (MLR) and eight machine learning techniques in pharmacogenetic algorithm-based prediction of tacrolimus stable dose (TSD) in a large Chinese cohort. A total of 1,045 renal transplant patients were recruited, 80% of which were randomly selected as the “derivation cohort” to develop dose-prediction algorithm, while the remaining 20% constituted the “validation cohort” to test the final selected algorithm. MLR, artificial neural network (ANN), regression tree (RT), multivariate adaptive regression splines (MARS), boosted regression tree (BRT), support vector regression (SVR), random forest regression (RFR), lasso regression (LAR) and Bayesian additive regression trees (BART) were applied and their performances were compared in this work. Among all the machine learning models, RT performed best in both derivation [0.71 (0.67-0.76)] and validation cohorts [0.73 (0.63-0.82)]. In addition, the ideal rate of RT was 4% higher than that of MLR. To our knowledge, this is the first study to use machine learning models to predict TSD, which will further facilitate personalized medicine in tacrolimus administration in the future.

Oromucosal film preparations: classification and characterization methods.

Science.gov (United States)

Preis, Maren; Woertz, Christina; Kleinebudde, Peter; Breitkreutz, Jörg

2013-09-01

Recently, the regulatory authorities have enlarged the variety of 'oromucosal preparations' by buccal films and orodispersible films. Various film preparations have entered the market and pharmacopoeias. Due to the novelty of the official monographs, no standardized characterization methods and quality specifications are included. This review reports the methods of choice to characterize oromucosal film preparations with respect to biorelevant characterization and quality control. Commonly used dissolution tests for other dosage forms are not transferable for films in all cases. Alternatives and guidance on decision, which methods are favorable for film preparations are discussed. Furthermore, issues about requirements for film dosage forms are reflected. Oromucosal film preparations offer a wide spectrum of opportunities. There are a lot of suggestions in the literature on how to control the quality of these innovative products, but no standardized tests are available. Regulatory authorities need to define the standards and quality requirements more precisely.

STUDY OF THERAPEUTIC COMPARISON OF TACROLIMUS 0.1% AND MINOXIDIL 2% IN ALOPECIA AREATA

Directory of Open Access Journals (Sweden)

Kallappa C. Herkal

2013-07-01

Full Text Available Introduction: Alopecia areata is a unique, idiopathic disease in which there is patchy hair loss. The variable and uncertain natural history of alopecia areata is accounting for the multiplicity of uncritical claims for a large variety of therapeutic procedures. Aim: to find the therapeutic comparison between tacrolimus 0.1% ointment and minoxidil 2% solution. Material and Methods: Patients attending skin out patient department in Navodaya medical college hospital and research centre, Raichur were screened and the consenting consecutive cases of Aopecia Areata (AA from December 2010 to November 2011 were chosen for study. There were 75 patients in the study. It is a randomized, single blind, intension to treat study. The eligible patients for the study were randomly allocated into two groups-Group A and Group B (38 in Group A and 37 in Group B. Patients in Group A were treated with 2% Minoxidi solution to be applied twice daily over the alopecia patch, where as Patients in Group B were treated with Tacrolimus 0.1% ointment applied twice daily. Patients were followed up at 2, 4, 6, 8, 10 and 12 weeks. Alopecia Grading Score (AGS was calculated at baseline and 12 weeks. Regrowth Score (RGS was calculated at 12 weeks. Results: Total 69 patients completed the study (35 in Group A and 34 in Group B. In our study RGS ≥ 3 was observed in 65.71% of patients treated with Tinoxidil 2% solution and 44.12% of patients treated with Tacrolimus 0.1% ointment. Conclusion: In our study Minoxidil 2% solution had better stimulatory effect on hair growth compared to Tacrolimus 0.1% ointment in the treatment of mild to moderate patchy alopecia areata. The combination treatment may yield a better clinical response than either of the agents used singly.

Comparable Renal Function at 6 Months with Tacrolimus Combined with Fixed-Dose Sirolimus or MMF: Results of a Randomized Multicenter Trial in Renal Transplantation

Directory of Open Access Journals (Sweden)

Eveline Van Gurp

2010-01-01

Full Text Available In a multicenter trial, renal transplant recipients were randomized to tacrolimus with fixed-dose sirolimus (Tac/SRL, N = 318 or tacrolimus with MMF (Tac/MMF, N = 316. Targeted tacrolimus trough levels were lower in the Tac/SRL group after day 14. The primary endpoint was renal function at 6 months using creatinine clearance (Cockcroft-Gault and was comparable at 66.4 mL/min (SE 1.4 with Tac/SRL and at 65.2mL/min (SE 1.3 with Tac/MMF (completers. Biopsy-confirmed acute rejection was 15.1% (Tac/SRL and 12.3% (Tac/MMF. In both groups, graft survival was 93% and patient survival was 99.0%. Premature withdrawal due to an adverse event was twice as high in the Tac/SRL group, 15.1% versus 6.3%. Hypercholesterolemia incidence was higher with Tac/SRL (P30 consecutive days in previously nondiabetic patients was 17.8%, Tac/SRL, and 24.8%, Tac/MMF. Evaluation at 6 months showed comparable renal function using tacrolimus/sirolimus and tacrolimus/MMF regimens.

Treatment of Sjögren's syndrome dry eye using 0.03% tacrolimus eye drop: Prospective double-blind randomized study.

Science.gov (United States)

Moscovici, Bernardo Kaplan; Holzchuh, Ricardo; Sakassegawa-Naves, Fernando Eiji; Hoshino-Ruiz, Diego Ricardo; Albers, Marcos Bottene Villa; Santo, Ruth Miyuki; Hida, Richard Yudi

2015-10-01

To describe the clinical efficacy of the treatment of Sjögren's syndrome dry eye using 0.03% tacrolimus eye drop. Prospective double-blind randomized study. Institutional outpatient clinic. Forty-eight eyes of twenty-four patients with dry eye related to Sjögren syndrome were enrolled in this study. The patients were randomized in 2 groups: tacrolimus (n=14) and vehicle (n=10) group. The tacrolimus group received a vial containing tacrolimus 0.03% (almond oil as vehicle) and the other group received the almond oil vehicle. All patients were instructed to use the eye drops every 12h in the lower conjunctival sac. Schirmer I test, break-up-time (BUT), corneal fluorescein and Rose Bengal staining scores were evaluated in all patients one day before the treatment (baseline), 7, 14, 28 and 90 days after treatment with the eye drops. The average fluorescein and Rose Bengal scores improved statistically after 7 days of treatment and even more after 90 days. The average Schirmer I and BUT values were unchanged after 7, 14 and 21 days but did show an improvement relative to baseline after 28 days of treatment. Schirmer I, BUT, fluorescein and Rose Bengal did not show any statistical significance in the vehicle group. Topical 0.03% tacrolimus eye drop improved tear stability and ocular surface status in cases of inflammatory or SS-related dry eye. ClinicalTrials.gov Identifier: NCT01850979. Copyright © 2015 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Adherence to and Acceptance of Once-Daily Tacrolimus After Kidney and Liver Transplant: Results From OSIRIS, a French Observational Study.

Science.gov (United States)

Cassuto, Elisabeth; Pageaux, Georges P; Cantarovich, Diego; Rostaing, Lionel; Loupy, Alexandre; Roche, Bruno; Duvoux, Christophe; Moreau, Karine; Thervet, Eric; Mazouz, Hakim; Bourhis, Yann; Dharancy, Sébastien; Kessler, Michèle

2016-10-01

Adherence to immunosuppressive treatments is a major concern in transplanted patients. This 6-month French observational, longitudinal, prospective study aimed to assess patient adherence to and acceptance of once-daily tacrolimus (Advagraf) initiation in kidney and liver transplant recipients. Data from 1106 patients initiating once-daily tacrolimus during posttransplant follow-up were analyzed. Adherence and acceptance were assessed using self-administered questionnaires at inclusion and at 3 and 6 months. Mean age was 52.4 ± 13.2 years, 61.5% were men. For 94.9% of patients, once-daily tacrolimus was prescribed after switching from twice-daily tacrolimus. At inclusion, 20.9% of patients reported good treatment adherence, 72.0% minor nonadherence, and 7.1% were nonadherent. Mean general acceptance score (range, 0-100) was 77.7 (±24.7). At 3 months, adherence was improved in 21.1%, unchanged in 69.2%, and worsened in 9.7% of patients. Mean general acceptance score was 75.4 (±26.5). General acceptance score was improved in 28.0%, unchanged in 39.4%, and worsened in 32.7% of patients. At 6 months, similar changes in adherence and acceptance were observed. Higher general acceptance score at month 3 was significantly associated with better adherence at month 6. Conversion to once-daily tacrolimus led to an improved rate of adherence at month 3 in more than 20% of patients and a worsened rate of adherence in less than 10% of patients.

Impact of cytochrome p450 3A5 genetic polymorphism on tacrolimus doses and concentration-to-dose ratio in renal transplant recipients.

Science.gov (United States)

Thervet, Eric; Anglicheau, Dany; King, Barry; Schlageter, Marie-Hélène; Cassinat, Bruno; Beaune, Philippe; Legendre, Christophe; Daly, Ann K

2003-10-27

Tacrolimus pharmacokinetic characteristics vary greatly among individuals. Tacrolimus is a substrate of cytochrome p450 (CYP), of subfamily CYP3A. CYP3A activity is the sum of the activities of the family of CYP3A genes, including CYP3A5. Subjects with the CYP3A5*1/*1 genotype express large amounts of CYP3A5. Heterozygotes (genotype CYP3A5*1/*3) also express the enzyme. We postulated that CYP3A5 polymorphism is associated with tacrolimus pharmacokinetic variations. CYP3A5 genotype was evaluated in 80 renal transplant recipients and correlated with the daily tacrolimus dose and concentration-to-dose ratio. The frequency of the homozygous CYP3A5*1 genotype (CYP3A5*1/*1) was 5%, and 11% of subjects were heterozygous (CYP3A5*1/*3). The mean doses required to obtain the targeted concentration-to-dose ratio were significantly lower in patients with the CYP3A5*1/*1 genotype. Determination of CYP3A5 genotype is predictive of the dose of tacrolimus in renal transplant recipients and may help to determine the initial daily dose needed by individual patients for adequate immunosuppression without excess nephrotoxicity.

Synergistic Antitumor Effect of Doxorubicin and Tacrolimus (FK506 on Hepatocellular Carcinoma Cell Lines

Directory of Open Access Journals (Sweden)

Francesca Capone

2014-01-01

Full Text Available Hepatocellular carcinoma is the fifth most common cancer worldwide and shows a complex clinical course, poor response to pharmacological treatment, and a severe prognosis. Thus, the aim of this study was to investigate whether tacrolimus (FK506 has synergistic antitumor effects with doxorubicin on two human hepatocellular carcinoma cell lines, Huh7 and HepG2. Cell viability was analyzed by Sulforhodamine B assay and synergic effect was evaluated by the software CalcuSyn. Cell apoptosis was evaluated using Annexin V and Dead Cell assay. Apoptosis-related protein PARP-1 cleaved and autophagy-related protein expressions (Beclin-1 and LC3B were measured by western blotting analysis. Cytokines concentration in cellular supernatants after treatments was studied by Bio-Plex assay. Interestingly the formulation with doxorubicin and tacrolimus induced higher cytotoxicity level on tumor cells than single treatment. Moreover, our results showed that the mechanisms involved were (i a strong cell apoptosis induction, (ii contemporaneous decrease of autophagy activation, understood as prosurvival process, and (iii downregulation of proinflammatory cytokines. In conclusion, future studies could relate to the doxorubicin/tacrolimus combination effects in mice models bearing HCC in order to see if this formulation could be useful in HCC treatment.

Different top-down approaches to estimate measurement uncertainty of whole blood tacrolimus mass concentration values.

Science.gov (United States)

Rigo-Bonnin, Raül; Blanco-Font, Aurora; Canalias, Francesca

2018-05-08

Values of mass concentration of tacrolimus in whole blood are commonly used by the clinicians for monitoring the status of a transplant patient and for checking whether the administered dose of tacrolimus is effective. So, clinical laboratories must provide results as accurately as possible. Measurement uncertainty can allow ensuring reliability of these results. The aim of this study was to estimate measurement uncertainty of whole blood mass concentration tacrolimus values obtained by UHPLC-MS/MS using two top-down approaches: the single laboratory validation approach and the proficiency testing approach. For the single laboratory validation approach, we estimated the uncertainties associated to the intermediate imprecision (using long-term internal quality control data) and the bias (utilizing a certified reference material). Next, we combined them together with the uncertainties related to the calibrators-assigned values to obtain a combined uncertainty for, finally, to calculate the expanded uncertainty. For the proficiency testing approach, the uncertainty was estimated in a similar way that the single laboratory validation approach but considering data from internal and external quality control schemes to estimate the uncertainty related to the bias. The estimated expanded uncertainty for single laboratory validation, proficiency testing using internal and external quality control schemes were 11.8%, 13.2%, and 13.0%, respectively. After performing the two top-down approaches, we observed that their uncertainty results were quite similar. This fact would confirm that either two approaches could be used to estimate the measurement uncertainty of whole blood mass concentration tacrolimus values in clinical laboratories. Copyright © 2018 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Advances in preparation and characterization of chitosan nanoparticles for therapeutics.

Science.gov (United States)

Chandra Hembram, Krushna; Prabha, Shashi; Chandra, Ramesh; Ahmed, Bahar; Nimesh, Surendra

2016-01-01

Polymers have been largely explored for the preparation of nanoparticles due to ease of preparation and modification, large gene/drug loading capacity, and biocompatibility. Various methods have been adapted for the preparation and characterization of chitosan nanoparticles. Focus on the different methods of preparation and characterization of chitosan nanoparticles. Detailed literature survey has been done for the studies reporting various methods of preparation and characterization of chitosan nanoparticles. Published database suggests of several methods which have been developed for the preparation and characterization of chitosan nanoparticles as per the application.

Decreased calcineurin immunoreactivity in the postmortem brain of a patient with schizophrenia who had been prescribed the calcineurin inhibitor, tacrolimus, for leukemia

Directory of Open Access Journals (Sweden)

Wada A

2016-07-01

Full Text Available Akira Wada,1,2 Yasuto Kunii,1 Jyunya Matsumoto,1 Mizuki Hino,1 Atsuko Nagaoka,1 Shin-ichi Niwa,3 Hirooki Yabe1 1Department of Neuropsychiatry, Fukushima Medical University School of Medicine, Fukushima City, Fukushima, 2Department of Neuropsychiatry, The University of Tokyo Hospital, Bunkyo-ku, Tokyo, 3Department of Psychiatry, Aizu Medical Center, Fukushima Medical University, Aizuwakamatsu City, Fukushima, Japan Background: The calcineurin (CaN inhibitor, tacrolimus, is widely used in patients undergoing allogeneic organ transplantation and in those with certain allergic diseases. Recently, several reports have suggested that CaN is also associated with schizophrenia. However, little data are currently available on the direct effect of tacrolimus on the human brain.Case: A 23-year-old Japanese female experienced severe delusion of persecution, delusional mood, suspiciousness, aggression, and excitement. She visited our hospital and was diagnosed with schizophrenia. When she was 27 years old, she had severe general fatigue, persistent fever, systemic joint pain, gingival bleeding, and breathlessness and was diagnosed with acute myelomonocytic leukemia. Later she underwent bone marrow transplantation (BMT, she was administered methotrexate and cyclosporin A to prevent graft versus host disease (GVHD. Three weeks after BMT, she showed initial symptoms of GVHD and was prescribed tacrolimus instead of cyclosporin A. Seven months after BMT at the age of 31 years, she died of progression of GVHD. Pathological anatomy was examined after her death, including immunohistochemical analysis of her brain using anti-CaN antibodies. For comparison, we used our previous data from both a schizophrenia group and a healthy control group. No significant differences were observed in the percentage of CaN-immunoreactive neurons among the schizophrenia group, healthy control group, and the tacrolimus case (all P>0.5, analysis of covariance. Compared with the

COMPARATIVE STUDY OF TOPICAL MOMETASONE FUROATE 0.1%, TOPICAL 0.03% TACROLIMUS, TOPICAL BASIC FIBROBLAST GROWTH FACTOR (bFGF IN CHILDHOOD VITILIGO

Directory of Open Access Journals (Sweden)

Kavitha S. B

2017-08-01

Full Text Available BACKGROUND Vitiligo, the commonest of all pigmentary disorders, is an idiopathic, acquired cutaneous achromia, characterised by circumscribed, chalky white macules. It may also involve the pigment epithelium of the eyes, the inner ear and the leptomeninges. Although, vitiligo can begin at any age, it develops before the age of 20 years in 50% of the patients and before the age of 10 years in 25% of patients. MATERIALS AND METHODS The study was conducted for a period of one year with 6 months active intervention. A group of 60 consecutive children attending the outpatient Department of Dermatology were included in this study. The same patients were acting as controls. RESULTS Grade 4 response was seen in 12 cases (60% who were on mometasone (VV-20%, focal-30%, segmental-10%, in 10 cases (50% on tacrolimus (VV-20%, focal-30% and in 4 cases (20% on bFGF (focal. Lesions on the face and neck showed grade 4 response in 16 cases (mometasone-8, tacrolimus-6 and bFGF-2, extremities in 6 cases. On the whole grade, 4 response was observed more with mometasone (60% followed by tacrolimus (50%. Grade 3 response was observed with bFGF (30%. CONCLUSION Topical mometasone was very effective among the 3 drugs used in childhood vitiligo showing grade 4 repigmentation in all types of vitiligo except mucosal vitiligo. Tacrolimus proved almost as effective as mometasone to restore skin colour in lesions of vitiligo in children. Because it does not produce atrophy or other adverse effects, tacrolimus may be very useful for younger patients, and for sensitive areas of the skin such as eyelids, it should be considered in other skin disorders currently treated with topical steroids for prolonged periods. Topical basic fibroblast growth factor though less effective than mometasone and tacrolimus, but can be tried as initial therapy in resistant cases such as segmental vitiligo as initial therapy of small vitiligo patches when physicians may not like to initiate high risk

Preparation and Characterization of Sugar Cane Wax Microspheres ...

African Journals Online (AJOL)

... and characterize indomethacin (IM) microspheres prepared with sugar cane wax microsperes. Methods: Microspheres were prepared by melt-emulsified dispersion and cooling-induced solidification method. The microspheres were characterized by scanning electron microscopy (SEM) and differntial scanning calorimetry ...

Effects of Storage Temperature and Time on Stability of Serum Tacrolimus and Cyclosporine A Levels in Whole Blood by LC-MS/MS

Directory of Open Access Journals (Sweden)

İbrahim Kaplan

2015-01-01

Full Text Available Tacrolimus and cyclosporine A are immunosuppressant drugs with narrow therapeutic windows. The aim of this study was to investigate the stability of tacrolimus and cyclosporin A levels in whole blood samples under different storage conditions. Whole blood samples were obtained from 15 patients receiving tacrolimus and 15 patients receiving cyclosporine A. Samples were immediately analyzed and then stored at different conditions (room temperature (24°C−26°C for 24 hours, +4°C for 24 and 48 hours, and −20°C for one month and then analyzed again. For tacrolimus, there was a significant difference between samples analyzed immediately and those kept 24 hours at room temperature (P=0.005 (percent change 32.89%. However, there were no significant differences between the other groups. For cyclosporine A, there was a significant difference between samples analyzed immediately and those kept 24 hours (P=0.003 (percent change 19.47% and 48 hours (P=0.002 (percent change 15.38% at +4°C and those kept 24 hours at room temperature (P=0.011 (percent change 9.71%. Samples of tacrolimus should be analyzed immediately or stored at either +4°C or −20°C, while samples of cyclosporine A should be analyzed immediately or stored at −20°C.

A Markov chain model to evaluate the effect of CYP3A5 and ABCB1 polymorphisms on adverse events associated with tacrolimus in pediatric renal transplantation.

Science.gov (United States)

Sy, Sherwin K B; Heuberger, Jules; Shilbayeh, Sireen; Conrado, Daniela J; Derendorf, Hartmut

2013-10-01

The SNP A6986G of the CYP3A5 gene (*3) results in a non-functional protein due to a splicing defect whereas the C3435T was associated with variable expression of the ABCB1 gene, due to protein instability. Part of the large interindividual variability in tacrolimus efficacy and toxicity can be accounted for by these genetic factors. Seventy-two individuals were examined for A6986G and C3435T polymorphism using a PCR-RFLP-based technique to estimate genotype and allele frequencies in the Jordanian population. The association of age, hematocrit, platelet count, CYP3A5, and ABCB1 polymorphisms with tacrolimus dose- and body-weight-normalized levels in the subset of 38 pediatric renal transplant patients was evaluated. A Markov model was used to evaluate the time-dependent probability of an adverse event occurrence by CYP3A5 phenotypes and ABCB1 genotypes. The time-dependent probability of adverse event was about double in CYP3A5 non-expressors compared to the expressors for the first 12 months of therapy. The CYP3A5 non-expressors had higher corresponding normalized tacrolimus levels compared to the expressors in the first 3 months. The correlation trend between probability of adverse events and normalized tacrolimus concentrations for the two CYP3A5 phenotypes persisted for the first 9 months of therapy. The differences among ABCB1 genotypes in terms of adverse events and normalized tacrolimus levels were only observed in the first 3 months of therapy. The information on CYP3A5 genotypes and tacrolimus dose requirement is important in designing effective programs toward management of tacrolimus side effects particularly for the initial dose when tacrolimus blood levels are not available for therapeutic drug monitoring.

Preparation and characterization of lamivudine microcapsules using ...

African Journals Online (AJOL)

Purpose: The objective of the present study was to prepare and evaluate microcapsules for the controlled release of lamivudine using various cellulose polymers. Methods: The microcapsules were prepared by the solvent evaporation method. The prepared microcapsules were characterized for the percent drug content, ...

Clinical study of double dose of valsartan combined with tacrolimus in treatment of diabetic nephropathy.

Science.gov (United States)

Jin, H; Zhang, H-N; Hou, X-L; Zhang, B; Wu, J; Zhang, H-B

2016-01-01

To investigate the clinical effect of double dose of valsartan combined with tacrolimus in the treatment of diabetic nephropathy (DN). HA total of 86 cases diagnosed with DN were selected from October 2013 to October 2014 in Zaozhuang Municipal Hospital, China. The study was approved by our hospital Ethics Committee and written consent was obtained from patients and their family members. Patients were randomly divided into three groups according to the sequence of admission, group A (conventional dose of valsartan group, n = 28 cases), group B (double dose of valsartan group, n = 29 cases) and group C (double dose of valsartan combined with tacrolimus group, n = 29). Clinical effects were compared by analyzing the renal function tests after 8 weeks. 24h urine protein, serum creatinine level of patients in group B and group C were significantly lower than that of group A. Those in group C was much lower. The glomerular filtration rates were significantly higher for group B and C than that of group A, and those in group C were much higher. The difference is statistically significant (p valsartan combined with tacrolimus treatment of DN patients can improve clinical symptoms, reducing inflammation, inhibiting or even reversing the interstitial fibrosis, which will improve the curative effect and reduce the recurrence, as to provide a new theoretical basis for the clinical treatment of the disease.

Tacrolimus concentration to dose ratio in solid organ transplant patients treated with fecal microbiota transplantation for recurrent Clostridium difficile infection.

Science.gov (United States)

Woodworth, Michael H; Kraft, Colleen S; Meredith, Erika J; Mehta, Aneesh K; Wang, Tiffany; Mamo, Yafet T; Dhere, Tanvi; Sitchenko, Kaitlin L; Patzer, Rachel E; Friedman-Moraco, Rachel J

2018-04-01

Fecal microbiota transplantation (FMT) is increasingly being performed for Clostridium difficile infection in solid organ transplant (SOT) patients; however, little is known about the potential pharmacokinetic or pharmacomicrobial effects this may have on tacrolimus levels. We reviewed the medical records of 10 SOT patients from September 2012-December 2016 who were taking tacrolimus at time of FMT for recurrent C. difficile infection. We compared the differences in tacrolimus concentration/dose ratio (C/D ratio) 3 months prior to FMT vs 3 months after FMT. The mean of the differences in C/D ratio calculated as (ng/mL)/(mg/kg/d) was -17.65 (95% CI -1.25 to 0.58) (ng/mL)/(mg/kg/d), P-value .43 by Wilcoxon signed-rank test. The mean of the differences in C/D ratio calculated as (ng/mL)/(mg/d) was -0.33 (95% CI -1.25 to 0.58) (ng/mL)/(mg/d), P-value .28 by Wilcoxon signed-rank test. Of these patients, 2/10 underwent allograft biopsy for allograft dysfunction in the year after FMT, with no evidence of allograft rejection on pathology. These preliminary data suggest that FMT may not predictably alter tacrolimus levels and support its safety for SOT patients however further study in randomized trials is needed. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Tacrolimus in the treatment of myasthenia gravis in patients with an inadequate response to glucocorticoid therapy: randomized, double-blind, placebo-controlled study conducted in China.

Science.gov (United States)

Zhou, Lei; Liu, Weibin; Li, Wei; Li, Haifeng; Zhang, Xu; Shang, Huifang; Zhang, Xu; Bu, Bitao; Deng, Hui; Fang, Qi; Li, Jimei; Zhang, Hua; Song, Zhi; Ou, Changyi; Yan, Chuanzhu; Liu, Tao; Zhou, Hongyu; Bao, Jianhong; Lu, Jiahong; Shi, Huawei; Zhao, Chongbo

2017-09-01

To determine the efficacy of low-dose, immediate-release tacrolimus in patients with myasthenia gravis (MG) with inadequate response to glucocorticoid therapy in a randomized, double-blind, placebo-controlled study. Eligible patients had inadequate response to glucocorticoids (GCs) after ⩾6 weeks of treatment with prednisone ⩾0.75 mg/kg/day or 60-100 mg/day. Patients were randomized to receive 3 mg tacrolimus or placebo daily (orally) for 24 weeks. Concomitant glucocorticoids and pyridostigmine were allowed. Patients continued GC therapy from weeks 1-4; from week 5, the dose was decreased at the discretion of the investigator. The primary efficacy outcome measure was a reduction, relative to baseline, in quantitative myasthenia gravis (QMG) score assessed using a generalized linear model; supportive analyses used alternative models. Of 138 patients screened, 83 [tacrolimus ( n = 45); placebo ( n = 38)] were enrolled and treated. The change in adjusted mean QMG score from baseline to week 24 was -4.9 for tacrolimus and -3.3 for placebo (least squares mean difference: -1.7, 95% confidence interval: -3.5, -0.1; p = 0.067). A post-hoc analysis demonstrated a statistically significant difference for QMG score reduction of ⩾4 points in the tacrolimus group (68.2%) versus the placebo group (44.7%; p = 0.044). Adverse event profiles were similar between treatment groups. Tacrolimus 3 mg treatment for patients with MG and inadequate response to GCs did not demonstrate a statistically significant improvement in the primary endpoint versus placebo over 24 weeks; however, a post-hoc analysis demonstrated a statistically significant difference for QMG score reduction of ⩾4 points in the tacrolimus group versus the placebo group. This study was limited by the low number of patients, the absence of testing for acetylcholine receptor antibody and the absence of stratification by disease duration (which led to a disparity between the two groups). Clinical

Which genetic determinants should be considered for tacrolimus dose optimization in kidney transplantation?

DEFF Research Database (Denmark)

Bruckmueller, H; Werk, Anneke Nina; Renders, Lutz

2014-01-01

). In addition, there are further polymorphic genes, possibly influencing CYP3A activity (pregnan x receptor NR1I2, P450 oxidoreductase POR and peroxisome proliferator-activator receptor alpha PPRA). We aimed to investigate combined effects of these gene variants on tacrolimus maintenance dose and PK in stable...

Effectiveness and safety of topical tacrolimus in treatment of vitiligo

Directory of Open Access Journals (Sweden)

Ghasem Rahmatpour Rokni

2017-01-01

Full Text Available Vitiligo is one of the most primitive well-known dermatoid disorders with different suggested therapies. Therefore, this study investigated the efficiency and safety of topical tacrolimus in treatment of patients with vitiligo. This study was a clinical randomized designed study pre- post-test method, has been conducted on thirty cases with vitiligo who have referred to polyclinic and dermatology clinic. Participant′s evaluated and demographic information recorded in designed checklist. In the next stage, the disease activity scored by vitiligo index disease activity system. Photography and depigmentation percent has recorded before treatment and further in 4 th , 8 th , 12 th , 16 th , 20 th , and 24 th weeks. Finally, gathered data compared through SPSS-20 software. The final sample comprised 30 persons including: 12 men (40% and 18 women (60%. The average of patient′s age in this study was 26/13 ΁ 18/20 (2-76-year-old. Eleven persons was ≤15 years old and rest was older than 15. Sixty-six lesions have funded in patients that maximum has accrued on face and neck (37/87% and trunk (21/21%. In addition, minimum of lesions is related to genitalia (9/09%. In the in 4 th , 8 th , 12 th , 16 th weeks, improvement in face and neck had increased significantly, into the past weeks. In the 20 th and 24 th weeks, the improvement has increased although it was not significant enhancement. Also about trunk, in the 4 th week the improvement does not have significant increasing in compare to the past week. In the eighth, 12 th , 16 th , 20 th , and 24 th weeks the improvement has been increased significantly in compare to the past weeks. Although in the case of limbs and genitalia, the improvement was lower. There was no significant difference between male and females and age. Although the improvement was, slow in older persons. Study results, has presented applying topical tacrolimus in vitiligo, particularly in face and neck, could be effective and

The Comparison of Efficacy of Adcortyl Ointment and Topical Tacrolimus in Treatment of Erosive Oral Lichen Planus

Directory of Open Access Journals (Sweden)

Arash Azizi

2007-12-01

Full Text Available

Background and aims. Oral lichen planus (OLP is a common chronic mucocutaneous disease. Patients with atrophic and erosive lichen planus often have symptoms of soreness and need proper treatment. The main therapy of OLP has been the administration of topical or systemic corticosteroids. Potent topical corticosteroids have been increasingly prescribed in the treatment of erosive lichen planus. The purpose of this study was to compare the efficacy of adcortyl ointment (triamcinolone in orabase with topical tacrolimus for the treatment of erosive oral lichen planus.

Materials and methods. Sixty Patients with histopathologically confirmed oral lichen planus were enrolled in the study. The severity of lesions was scored from 0 to 5 according to the criteria described in a previous study. Patients were randomly given adcortyl (group A and topical tacrolimus ointment (group B and asked to apply the medication on dried lesions 4 times a day. The lesions were evaluated after 4 weeks of treatment. Visual analogue scale was used to assess the severity of pain before and after treatment. The severity scores were analyzed using the Kruskal-Wallis k-sample test.

Results. The average score of lesions improved from 3.4 to 1.5 in patients who received adcortyl ointment and from 3.2 to 1.2 in patients who received topical tacrolimus ointment. The differences between the improvements in scores were not statistically significant in the two groups. The average pain severity in A and B groups was 8.2 and 7.8 at the beginning of treatment, and 3.5 and 3.2 at the end of treatment, respectively. There was a statistically significant reduction in pain severity in both groups.

Conclusion. Topical tacrolimus is a safe and effective alternative therapy in the treatment of oral lichen planus.

A case of vesicular cutaneous lupus erythematosus in a Border collie successfully treated with topical tacrolimus and nicotinamide-tetracycline.

Science.gov (United States)

Lehner, Georg M; Linek, Monika

2013-12-01

Canine vesicular cutaneous lupus erythematosus (VCLE) is an autoimmune skin disease of the Shetland sheepdog and rough collie, which manifests as an erosive dermatitis of sparsely haired skin of the ventrum and concave pinnae. Reported treatment consists of immunosuppression with glucocorticoids alone or in combination with azathioprine, but successful treatment is unpredictable. To report on the treatment of VCLE in a Border collie dog with topical 0.1% tacrolimus and nicotinamide in combination with tetracycline. An 8-year-old male neutered Border collie was presented with multiple coalescing erosions on the ventral abdomen, groin and axillae and ulceration on the oral commissures. Clinical presentation, routine diagnostics, histology and immunohistochemistry were consistent with VCLE. Remission was achieved with topical 0.1% tacrolimus and combination therapy of nicotinamide and tetracycline. This dog responded well to treatment with topical 0.1% tacrolimus, nicotinamide-tetracycline and sun avoidance. Complete remission was achieved after 2.5 months, and the dog was lesion free during a 1 year follow-up period. © 2013 ESVD and ACVD.

Development and characteriza

Directory of Open Access Journals (Sweden)

Raisuddin Ali

2017-02-01

Full Text Available Tacrolimus is a potent immunosuppressant; however, it suffers from several problems such as poor water solubility (4–12 μg/mL, low and variable oral bioavailability in patients, and narrow therapeutic window that could not be solved by the currently available i.v. formulation (Prograf®. Moreover, Prograf® contains HCO-60 (PEGylated castor oil as a surfactant, which is reported to cause several side effects including hypersensitivity reactions. Therefore, the aim of the present study was to investigate the potential of PEO-b-PCL polymeric micelles as alternative vehicles for the solubilization and delivery of tacrolimus. Four PEO-b-PCL block copolymers, with different molecular weights of PCL, were synthesized by ring opening polymerization of ε-caprolactone using methoxy polyethylene oxide (5,000 g mol−1 as initiator and stannous octoate as catalyst. Synthesized copolymers were characterized for their average molecular weights and polydispersity index by 1H NMR and gel permeation chromatography (GPC, respectively. Drug-free micelles of PEO-b-PCL were prepared through a co-solvent evaporation method using acetone as the organic co-solvent. Tacrolimus-loaded micelles were prepared using the same method with different initial amounts of drug. Prepared micelles were characterized for their mean diameter size and polydispersity of the micellar population by dynamic light scattering, and an HPLC assay was used to determine the encapsulation efficiency of tacrolimus. The average molecular weights of the synthesized copolymers were in the range of 8,400–28,000 with narrow distributions (PDI = 1.06–1.11. The copolymers were designated according to the degree of polymerization of ε-caprolactone, namely PEO114-b-PCL30, PEO114-b-PCL60, PEO114-b-PCL120, and PEO114-b-PCL200. All the prepared micelles were having diameters sizes less than 100 nm with narrow distributions. The highest drug solubilization was achieved with PEO114-b-PCL120

Differential Antitumoral Properties and Renal-Associated Tissue Damage Induced by Tacrolimus and Mammalian Target of Rapamycin Inhibitors in Hepatocarcinoma: In Vitro and In Vivo Studies.

Directory of Open Access Journals (Sweden)

Elena Navarro-Villarán

Full Text Available Orthotopic liver transplantation (OLT is the recommended treatment for patients at early stages of hepatocarcinoma (HCC with potential portal hypertension and/or bilirubinemia, but without vascular-associated diseases. The patients are receiving immunosuppressive therapy to reduce graft rejection, but differential side effects have been related to calcineurin and mTOR inhibitor administration regarding tumor recurrence and nephrotoxicity. The in vitro studies showed that Tacrolimus exerted a more potent pro-apoptotic effect than Everolimus (Huh 7>Hep 3B>HepG2, being sirolimus only active in Hep3B cell line. Tacrolimus and Everolimus exerted potent antiproliferative properties in Huh 7 and Hep3B in which cells Sirolimus was inactive. Interestingly, Tacrolimus- and Everolimus-dependent G0/G1 cell accumulation occurred as a consequence of drastic reduction in S, as well as in S and G2+M phases, respectively. The in vivo studies support data on the more effective antitumoral properties of Everolimus, eventual risk of pro-angiogenic tumoral properties and nephrotoxicity of Tacrolimus, and pro-proliferative properties of Sirolimus in tumors developed in nude mice.

Therapeutic drug monitoring of tacrolimus in pancreas transplantation at São Lucas Hospital Monitoramento terapêutico de tacrolimus em transplante de pâncreas no Hospital São Lucas

Directory of Open Access Journals (Sweden)

Luciana Mello de Oliveira

2007-10-01

Full Text Available Tacrolimus (FK 506, a potent immunosuppressive drug used in prevention and treatment of rejection of transplanted organs, exhibits efficacy related to its blood levels and has a narrow therapeutic index. These factors require frequent monitoring of patients blood levels, in attempt to adjust the dose to reach the best drug concentration with minimum side effects. In this historic study, the authors evaluated tacrolimus blood profile in patients submitted to pancreas transplantation between June 2002 and March 2004. The results show that blood levels were, mostly, within subtherapeutic (39.1% and toxic (43.4% ranges. Considering post-transplantation period, subtherapeutic levels were more frequent until three months after the graft receiving (51.1% and between three and six months (41.9%, whereas toxic levels were more common six months after the transplantation (63%. Patients who received pancreas/kidney transplantation showed a tendency to present toxic levels. The same did not happen with the patients who received isolated pancreas and pancreas after kidney; these patients presented subtherapeutic blood levels in all post-transplantation periods. The results found in this study reassure the importance of therapeutic monitoring to achieve the adequate blood levels of tacrolimus following pancreas transplantation.O tacrolimus (FK506, um potente imunossupressor utilizado na profilaxia e no tratamento de rejeições pós-transplante, exibe eficácia relacionada com sua concentração sangüínea e possui estreita janela terapêutica. Esses fatores requerem o freqüente monitoramento dos níveis sangüíneos em pacientes que fazem uso do fármaco, tendo como objetivo o ajuste de dose para uma concentração terapêutica ótima com efeitos colaterais mínimos. Este estudo retrospectivo foi realizado através do acesso à base de dados do Laboratório de Patologia Clínica do Hospital São Lucas, da Pontifícia Universidade Católica do Rio Grande do

Bioequivalence between innovator and generic tacrolimus in liver and kidney transplant recipients: A randomized, crossover clinical trial.

Directory of Open Access Journals (Sweden)

Rita R Alloway

2017-11-01

Full Text Available Although the generic drug approval process has a long-term successful track record, concerns remain for approval of narrow therapeutic index generic immunosuppressants, such as tacrolimus, in transplant recipients. Several professional transplant societies and publications have generated skepticism of the generic approval process. Three major areas of concern are that the pharmacokinetic properties of generic products and the innovator (that is, "brand" product in healthy volunteers may not reflect those in transplant recipients, bioequivalence between generic and innovator may not ensure bioequivalence between generics, and high-risk patients may have specific bioequivalence concerns. Such concerns have been fueled by anecdotal observations and retrospective and uncontrolled published studies, while well-designed, controlled prospective studies testing the validity of the regulatory bioequivalence testing approach for narrow therapeutic index immunosuppressants in transplant recipients have been lacking. Thus, the present study prospectively assesses bioequivalence between innovator tacrolimus and 2 generics in individuals with a kidney or liver transplant.From December 2013 through October 2014, a prospective, replicate dosing, partially blinded, randomized, 3-treatment, 6-period crossover bioequivalence study was conducted at the University of Cincinnati in individuals with a kidney (n = 35 or liver transplant (n = 36. Abbreviated New Drug Applications (ANDA data that included manufacturing and healthy individual pharmacokinetic data for all generics were evaluated to select the 2 most disparate generics from innovator, and these were named Generic Hi and Generic Lo. During the 8-week study period, pharmacokinetic studies assessed the bioequivalence of Generic Hi and Generic Lo with the Innovator tacrolimus and with each other. Bioequivalence of the major tacrolimus metabolite was also assessed. All products fell within the US Food and Drug

PRES (posterior reversible encephalopathy syndrome), a rare complication of tacrolimus therapy.

LENUS (Irish Health Repository)

Hodnett, P

2009-11-01

With increasing numbers of solid organ and hematopoietic stem cell transplantations being performed, there have been significant increases in the use of immunosuppressive agents such as cyclosporine and tacrolimus. Posterior reversible encephalopathy syndrome (PRES) is a serious complication of immunosuppressive therapy use following solid organ or stem cell transplants. Clinical findings including headache, mental status changes, focal neurological deficits, and\\/or visual disturbances. Associated with these are characteristic imaging features of subcortical white matter lesions on computed tomography (CT) or magnetic resonance imaging (MRI). The changes in the subcortical white matter are secondary to potentially reversible vasogenic edema, although conversion to irreversible cytotoxic edema has been described. These imaging findings predominate in the territory of the posterior cerebral artery. Many studies have shown that the neurotoxicity associated with tacrolimus may occur at therapeutic levels. In most cases of PRES, the symptom complex is reversible by reducing the dosage or withholding the drug for a few days. While PRES is an uncommon complication, it is associated with significant morbidity and mortality if it is not expeditiously recognized. MRI represents the most sensitive imaging technique for recognizing PRES. This report highlights the value of MRI in prompt recognition of this entity, which offers the best chance of avoiding long-term sequelae.

Characterization of Microemulsions Prepared using Isopropyl ...

African Journals Online (AJOL)

HP

subjected to further characterization by polarized light microscopy, differential scanning calorimetry. (DSC) ... preparation and phase inversion. The aim .... propanol, D = butanol, E = pentanol .... and water-soluble compounds in triglycerides. In.

The incidence of post-transplant cancer among kidney transplant recipients is associated with the level of tacrolimus exposure during the first year after transplantation.

Science.gov (United States)

Lichtenberg, Shelly; Rahamimov, Ruth; Green, Hefziba; Fox, Benjamin D; Mor, Eytan; Gafter, Uzi; Chagnac, Avry; Rozen-Zvi, Benaya

2017-07-01

Immunosuppressive therapy plays a major role in the development of post-transplant cancer. In this nested case-control study of kidney transplant recipients (KTRs), we investigated whether the incidence of post-transplant cancer is associated with the level of tacrolimus exposure over time. We screened the Rabin Medical Center database for adults who received kidney transplants between 2001 and 2014 and developed post-transplant cancer (excluding basal and squamous cell skin cancers). They were matched against KTRs without cancer. All patients received a maintenance immunosuppressive treatment with tacrolimus, mycophenolate mofetil and corticosteroids. The degree of exposure to tacrolimus was estimated as the time-weighted average (tTWA) value of tacrolimus blood levels. The tTWA was calculated as the area under the curve divided by time at 1, 6, and 12 months after transplantation and at time of cancer diagnosis. Thirty-two cases were matched against 64 controls. tTWA values above 11 ng/mL at 6 and 12 months after transplantation were associated with odds ratio (OR) of 3.1 (95% CI 1.1-9) and 11.7 (95% CI = 1.3-106), respectively, for post-transplant cancer; and with OR of 5.2 (95% CI 1.3-20.5) and 14.1 (95% CI = 1.5-134.3), respectively, for cancer diagnosed more than 3 years after transplantation. Exposure to a tacrolimus time-weighted average level above 11 ng/mL at 6 or 12 months after kidney transplantation is associated with an increased risk of developing cancer.

New tablet formulation of tacrolimus with smaller interindividual variability may become a better treatment option than the conventional capsule formulation in organ transplant patients

Directory of Open Access Journals (Sweden)

Kim YK

2017-09-01

Full Text Available Yu Kyong Kim,1 Anhye Kim,1,2 Shin Jung Park,3 Howard Lee1,4 1Department of Clinical Pharmacology and Therapeutics, Seoul National University College of Medicine and Hospital, Seoul, 2Clinical Trial Center, Ajou University Medical Center, Suwon, 3Research Institute, Chong Kun Dang Pharmaceutical Corp, Yongin, 4Department of Transdisciplinary Studies, Graduate School of Convergence Science and Technology, Seoul National University, Suwon, Republic of Korea Abstract: To evaluate the pharmacokinetic (PK and tolerability profiles of a new tablet formulation of tacrolimus and its interindividual variability (IIV in the systemic exposure, and to compare them with those of the conventional capsule formulation, a randomized, open-label, two-treatment, two-period, two-sequence, crossover study was performed in 47 healthy males. The capsule or tablet formulation of tacrolimus was orally administered, and serial blood samples were collected up to 96 hours after dosing. Whole-blood tacrolimus concentration was determined using liquid chromatography–tandem mass spectrometry. The maximum whole-blood tacrolimus concentration (Cmax and the area under the whole-blood tacrolimus concentration–time curve from 0 hour to the last quantifiable concentration (AUClast were compared between the two formulations. The similarity factor (f2 of the in vitro dissolution profiles was calculated. The geometric mean ratio (90% confidence interval of tablet to capsule was 0.9680 (0.8873–1.0560 and 1.0322 (0.9359–1.1385 for Cmax and AUClast, respectively. The IIV of Cmax and AUClast of the tablet was smaller than the capsule. The f2 values were >50 in all media. Both formulations were well tolerated. Thus, the tablet formulation of tacrolimus has smaller IIV in the systemic exposure than capsule, while having comparable PK and tolerability profiles, which may render it as a better treatment option for organ transplant patients. Keywords: new formulation, incrementally

Relative bioavailability of single doses of prolonged-release tacrolimus administered as a suspension, orally or via a nasogastric tube, compared with intact capsules: a phase 1 study in healthy participants.

Science.gov (United States)

Undre, Nasrullah; Dickinson, James

2017-04-04

Tacrolimus, an immunosuppressant widely used in solid organ transplantation, is available as a prolonged-release capsule for once-daily oral administration. In the immediate postsurgical period, if patients cannot take intact capsules orally, tacrolimus therapy is often initiated as a suspension of the capsule contents, delivered orally or via a nasogastric tube. This study evaluated the relative bioavailability of prolonged-release tacrolimus suspension versus intact capsules in healthy participants. A phase 1, open-label, single-dose, cross-over study. A single clinical research unit. In total, 20 male participants, 18-55 years old, entered and completed the study. All participants received nasogastric administration of tacrolimus 10 mg suspension in treatment period 1, with randomisation to oral administration of suspension or intact capsules in periods 2 and 3. Blood concentration-time profile over 144 hours was used to estimate pharmacokinetic parameters. Primary end point: relative bioavailability of prolonged-release intact capsule versus oral or nasogastric administration of prolonged-release tacrolimus suspension (area under the concentration-time curve (AUC) from time 0 to infinity post-tacrolimus dose (AUC 0-∞ ); AUC measured until the last quantifiable concentration (AUC 0-tz ); maximum observed concentration (C max ); time to C max (T max )). Tolerability was assessed throughout the study. Relative bioavailability of prolonged-release tacrolimus suspension administered orally was similar to intact capsules, with a ratio of least-square means for AUC 0-tz and AUC 0-∞ of 1.05 (90% CI 0.96 to 1.14). Bioavailability was lower with suspension administered via a nasogastric tube versus intact capsules (17%; ratio 0.83; CI 0.76 to 0.92). C max was higher for oral and nasogastric suspension (30% and 28%, respectively), and median T max was shorter (difference 1.0 and 1.5 hours postdose, respectively) versus intact capsules (2.0 hours). Single 10�

CYP3A5 genotyping may reduce the cost of care and guide dosing in paediatric renal transplant recipients treated with tacrolimus: A report of two paediatric renal transplant cases

Directory of Open Access Journals (Sweden)

Stephen M. Roper

2017-05-01

Full Text Available Therapeutic tacrolimus blood levels are often difficult to achieve immediately after transplant. Pharmacogenetic testing is an option to predict the metabolism of tacrolimus; however the clinical benefits of this approach have not been extensively studied. We describe two paediatric renal transplant recipients who were initially treated with a standard dosing equation for tacrolimus, but required increased frequency of therapeutic drug monitoring and multiple dose adjustments leading to increased cost of hospitalization. A novel perspective is that pharmacogenetic testing is appropriate to reduce length of hospitalization and the total cost of care.

Tacrolimus interaction with nafcillin resulting in significant decreases in tacrolimus concentrations: A case report.

Science.gov (United States)

Wungwattana, Minkey; Savic, Marizela

2017-04-01

Tacrolimus (TAC) is subject to many drug interactions as a result of its metabolism primarily via CYP450 isoenzyme 3A4. Numerous case reports of TAC and CYP3A4 inducers and inhibitors have been described including antimicrobials, calcium channel antagonists, and antiepileptic drugs. We present the case of a 13-year-old patient with cystic fibrosis and a history of liver transplantation, where subtherapeutic TAC concentrations were suspected to be a result of concomitant TAC and nafcillin (NAF) therapy. The observed drug interaction occurred on two separate hospital admissions, during both of which the patient exhibited therapeutic TAC concentrations prior to exposure to NAF, a CYP3A4 inducer. Upon discontinuation of NAF, TAC concentrations recovered in both instances. This case represents a drug-drug interaction between TAC and NAF that has not previously been reported to our knowledge. Despite the lack of existing reports of interaction between these two agents, this case highlights the importance of therapeutic drug monitoring and assessing for any potential drug-drug or drug-food interactions in patients receiving TAC therapy. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Gelatin/chitosan biofilm: preparation and characterization

International Nuclear Information System (INIS)

Trindade, Luciane da C.; Nunes, Raquel A.; Diniz, Nadie K.S.; Braga, Carla R.C.; Silva, Suedina M. de Lima

2011-01-01

In this study, gelatin, chitosan and gelatin/chitosan bio films using the ratio of gelatin/chitosan (50/50) were prepared by casting method. The bio films prepared were characterized by X-ray diffraction, scanning electron microscopy and dissolution ratio. According to the results, the incorporation of chitosan into gelatin indicate the decrease of crystallinity of chitosan, a compact structure without large pores and that the dissolution of gelatin/chitosan film is little influenced by hot water than gelatin films. (author)

Update on the clinical utility of once-daily tacrolimus in the management of transplantation

Directory of Open Access Journals (Sweden)

Revollo J

2015-05-01

Full Text Available Jane Revollo Department of Pharmacy, Jackson Memorial Hospital, University of Miami Leonard M Miller School of Medicine Miami, FL, USAThe review by Posadas Salas and Srinivas of the clinical utility of once-daily tacrolimus formulations in the management of transplant patients1 was timely and relevant. It is worth noting, however, the data were presented in a way that overlooked several key differences between two distinct once-daily tacrolimus formulations. These formulations differ in bioavailability, Cmax, Tmax, dose required to achieve target trough levels, and time to reach target trough. The specific formulation and dosing information of one product was detailed in this review (described as modified release 4 [MR-4]; Astagraf®, Astellas Pharma Inc., Tokyo, Japan, but no formulation or dosing details were provided for a very different once-daily tacrolimus formulation (LCP-Tacro™; Veloxis Pharmaceuticals A/S, Hørsholm, Denmark for which a thorough review was recently published.2 The latter product is currently approved in Europe and under review by the US Food and Drug Administration in the US. In presenting data in this review, the authors did not identify which product was investigated in each of the studies discussed. This could easily lead to misinterpretation of results or erroneous conclusions, ie, that both once-daily formulations are the same. In fact, a careful parsing of the data clearly demonstrates that they are not equivalent. Misunderstanding of this point could have a potentially serious impact on appropriate dosing, safety, and patient management in the post-transplant setting. Differentiation between the two products is needed to clarify what appear to be conflicting results of the studies presented in this review.View original paper by Posadas Salas and Srinivas

Efficacy of topical tacrolimus 0.1% in active plaque morphea: randomized, double-blind, emollient-controlled pilot study.

NARCIS (Netherlands)

Kroft, Ilse; Groeneveld, T.J.; Seyger, M.M.B.; Jong, E.M.G.J. de

2009-01-01

BACKGROUND: Tacrolimus, a calcineurin inhibitor, is an immunomodulating and anti-inflammatory drug that inhibits T-cell activation and production of cytokines. The elevated level of cytokines in morphea causes fibroblast proliferation and subsequent overproduction of collagen. Theoretically,

Effect of cyclosporine, tacrolimus and sirolimus on cellular senescence in renal epithelial cells.

Science.gov (United States)

Koppelstaetter, Christian; Kern, Georg; Leierer, Gisela; Mair, Sabine Maria; Mayer, Gert; Leierer, Johannes

2018-04-01

In transplantation medicine calcineurin inhibitors (CNI) still represent the backbone of immunosuppressive therapy. The nephrotoxic potential of the CNI Cyclosporine A (CsA) and Tacrolimus (FK506) is well recognized and CNI not only have been linked with toxicity, but also with cellular senescence which hinders parenchymal tissue regeneration and thus may prime kidneys for subsequent insults. To minimize pathological effects on kidney grafts, alternative immunosuppressive agents like mTOR inhibitors or the T-cell co-stimulation blocker Belatacept have been introduced. We compared the effects of CsA, FK506 and Sirolimus on the process of cellular senescence in different human renal tubule cell types (HK2, RPTEC). Telomere length (by real time PCR), DNA synthesis (by BrdU incorporation), cell viability (by Resazurin conversion), gene expression (by RT-PCR), protein (by western blotting), Immuncytochemistry and H 2 O 2 production (by Amplex Red® conversion) were evaluated. DNA synthesis was significantly reduced when cells were treated with cyclosporine but not with tacrolimus and sirolimus. Resazurin conversion was not altered by all three immunosuppressive agents. The gene expression as well as protein production of the cell cycle inhibitor p21 (CDKN1A) but not p16 (CDKN2A) was significantly induced by cyclosporine compared to the other two immunosuppressive agents when determined by western blotting an immuncytochemistry. Relative telomere length was reduced and hydrogen peroxide production increased after treatment with CsA but not with FK506 or sirolimus. In summary, renal tubule cells exposed to CsA show clear signs of cellular senescence where on the contrary the second calcineurin inhibitor FK506 and the mTOR inhibitor sirolimus are not involved in such mechanisms. Chronic renal allograft dysfunction could be in part triggered by cellular senescence induced by immunosuppressive medication and the choice of drug could therefore influence long term outcome

Time to reach tacrolimus maximum blood concentration,mean residence time, and acute renal allograft rejection: an open-label, prospective, pharmacokinetic study in adult recipients.

Science.gov (United States)

Kuypers, Dirk R J; Vanrenterghem, Yves

2004-11-01

The aims of this study were to determine whether disposition-related pharmacokinetic parameters such as T(max) and mean residence time (MRT) could be used as predictors of clinical efficacy of tacrolimus in renal transplant recipients, and to what extent these parameters would be influenced by clinical variables. We previously demonstrated, in a prospective pharmacokinetic study in de novo renal allograft recipients, that patients who experienced early acute rejection did not differ from patients free from rejection in terms of tacrolimus pharmacokinetic exposure parameters (dose interval AUC, preadministration trough blood concentration, C(max), dose). However, recipients with acute rejection reached mean (SD) tacrolimus T(max) significantly faster than those who were free from rejection (0.96 [0.56] hour vs 1.77 [1.06] hours; P clearance nor T(1/2) could explain this unusual finding, we used data from the previous study to calculate MRT from the concentration-time curves. As part of the previous study, 100 patients (59 male, 41 female; mean [SD] age, 51.4 [13.8] years;age range, 20-75 years) were enrolled in the study The calculated MRT was significantly shorter in recipients with acute allograft rejection (11.32 [031] hours vs 11.52 [028] hours; P = 0.02), just like T(max) was an independent risk factor for acute rejection in a multivariate logistic regression model (odds ratio, 0.092 [95% CI, 0.014-0.629]; P = 0.01). Analyzing the impact of demographic, transplantation-related, and biochemical variables on MRT, we found that increasing serum albumin and hematocrit concentrations were associated with a prolonged MRT (P calculated MRT were associated with a higher incidence of early acute graft rejection. These findings suggest that a shorter transit time of tacrolimus in certain tissue compartments, rather than failure to obtain a maximum absolute tacrolimus blood concentration, might lead to inadequate immunosuppression early after transplantation.

Primary tacrolimus (FK506) therapy and the long-term risk of post-transplant lymphoproliferative disease in pediatric liver transplant recipients.

Science.gov (United States)

Cacciarelli, T V; Reyes, J; Jaffe, R; Mazariegos, G V; Jain, A; Fung, J J; Green, M

2001-10-01

While the overall incidence of post-transplant lymphoproliferative disease (PTLD) in pediatric liver transplant recipients has been reported to be 4-11%, the long-term risk of PTLD associated with primary tacrolimus therapy is unknown. Therefore, in order to determine the incidence and long-term risk of PTLD, the present study examined 131 pediatric recipients who underwent liver transplantation (LTx) between October 1989 and December 1991 and received primary tacrolimus therapy. This cohort of children was evaluated over an extended time-period (until December 31 1996) with a mean follow-up of 6.3 yr. Actuarial Kaplan-Meier analysis was utilized to determine the risk of PTLD over time. The overall incidence of PTLD was 13% (17/131) with an average age of 4.3 +/- 0.75 yr at diagnosis. Pretransplant Epstein-Barr virus (EBV) serologies were negative in 82%, positive in 12%, and not available in 6% of the patients. The median time to diagnosis of PTLD post-Tx was 11.9 months (mean 16.4 +/- 3.9, range 1.7-63.0 months). Mean tacrolimus dose and plasma trough level (as evaluated by enzyme-linked immunosorbent assay [ELISA]) at the time of diagnosis was 0.32 +/- 0.06 mg/kg/day and 1.3 +/- 0.3 ng/mL, respectively. The cumulative long-term risk of PTLD was found to increase over time: 3% at 6 months, 8% at 1 yr, 12% at 2 yr, 14% at 3 yr, and 15% at 4 and 5 yr. Mortality from PTLD was 12% (two of 17 patients). Primary tacrolimus use in pediatric LTx has a long-term risk of PTLD approaching 15%, with the majority of episodes (78%) occurring in the first 2 yr, suggesting that intense EBV surveillance should occur early post-transplantation.

Sirolimus for rescue and primary immunosuppression in transplanted children receiving tacrolimus.

Science.gov (United States)

Sindhi, R; Webber, S; Venkataramanan, R; McGhee, W; Phillips, S; Smith, A; Baird, C; Iurlano, K; Mazariegos, G; Cooperstone, B; Holt, D W; Zeevi, A; Fung, J J; Reyes, J

2001-09-15

The role of sirolimus (SRL) as a rescue agent (n=42) and as a component of primary immunosuppression (n=8) was evaluated in a mixed population of 50 transplanted children receiving tacrolimus (liver: 26, heart: 5, intestinal: 5, liver-intestine: 9, lung: 1, bone marrow: 1, liver-kidney: 1, multivisceral: 1). Rescue indications for tacrolimus (TAC) failure were recurrent acute rejection and acute rejection complicating withdrawal of immunosuppression in posttransplant lymphoproliferative disorder (PTLD). Rescue indications for TAC toxicity were nephrotoxicity, pancreatitis, seizures, hypertrophic cardiomyopathy, and graft-versus-host disease. Mean age at rescue was 11.5 years and mean follow-up was 204 (range 18-800) days. As primary immunosuppression, SRL+TAC prevented early acute rejection in 7/8 children. The indication for rescue resolved in 33/42 children. In children with TAC toxicity, this was associated with decrease in TAC doses by 50%, significant improvements in renal function, and continuing decline in Epstein-Barr virus (EBV) viral load in PTLD patients. Serious adverse events led to discontinuation of SRL in 9/42 rescue patients, 3 of them also experienced acute rejection. Three additional children also experienced acute rejection on SRL therapy (overall incidence 6/50, 12%). Pharmacokinetic analysis in the first week of SRL administration suggested a short half-life (11.8+/-5.5 hr, n=21). SRL and reduced-dose TAC may achieve adequate immunosuppression without compromising renal function or enhancing EBV viremia significantly.

Safety of reduced dose of mycophenolate mofetil combined with tacrolimus in living-donor liver transplantation

Directory of Open Access Journals (Sweden)

Hyeyoung Kim

2014-09-01

Full Text Available Background/AimsThe dose of mycophenolate mofetil (MMF has been reduced in Asia due to side effects associated with the conventional fixed dose of 2-3 g/day. We aimed to determine the pharmacokinetics of a reduced dose of MMF and to validate its feasibility in combination with tacrolimus in living-donor liver transplantation (LDLT.MethodsTwo sequential studies were performed in adult LDLT between October 2009 and 2011. First, we performed a prospective pharmacokinetic study in 15 recipients. We measured the area under the curve from 0 to 12 hours (AUC0-12 for mycophenolic acid at postoperative days 7 and 14, and we performed a protocol biopsy before discharge. Second, among 215 recipients, we reviewed 74 patients who were initially administered a reduced dose of MMF (1.0 g/day with tacrolimus (trough, 8-12 ng/mL during the first month, and 5-8 ng/mL thereafter, with a 1-year follow-up. We performed protocol biopsies at 2 weeks and 1 year post-LDLT.ResultsIn the first part of study, AUC0-12 was less than 30 mgh/L in 93.3% of cases. In the second, validating study, 41.9% of the recipients needed dose reduction or cessation due to side effects within the first year after LDLT. At 12 months post-LDLT, 17.6% of the recipients were administered a lower dose of MMF (0.5 g/day, and 16.2% needed permanent cessation due to side effects. The 1- and 12-month rejection-free survival rates were 98.6% and 97.3%, respectively.ConclusionsA reduced dose of MMF was associated with low blood levels compared to the existing recommended therapeutic range. However, reducing the dose of MMF combined with a low level of tacrolimus was feasible clinically, with an excellent short-term outcome in LDLT.

Efficacy of topical application of 0.03% tacrolimus eye ointment in the management of allergic conjunctivitis.

Science.gov (United States)

Hazarika, Ajit Kumar; Singh, Prodip Kumar

2015-08-01

Allergic conjunctivitis is commonly observed eye diseases in Sikkim, India due to the abundance of seasonal pollens, environmental pollutants, and house dust. We evaluated the efficacy of topical 0.03% tacrolimus eye ointment in the management of simple allergic conjunctivitis. A prospective observational study was designed consisting of 41 patients with refractory simple allergic conjunctivitis, whose condition responded very poorly to conventional anti-allergic eye drops (azelastine, olopatadine, chlorpheniramine maleate, sodium chromoglycate). Simple allergic conjunctivitis cases were diagnosed and followed up evaluating both subjective and objective findings (itching, photophobia, tearing, chemosis, conjunctival congestion, tarsal papilla, and eyelid edema). Existing ocular treatment was discontinued at enrolment and 0.03% tacrolimus ointment was applied into the conjunctival sac of the affected eyes twice daily for 4 weeks followed by a 2 weeks washout period. Patients were followed up at the end of 1(st) week, 4(th) week, and at 7(th) week (2 weeks washout period). Symptoms of simple allergic conjunctivitis (itching, tearing and photophobia) were significantly reduced at the end of 1(st) week. Signs such as conjunctival chemosis, congestion, tarsal papillae, and eyelid edema were effectively treated in all cases at the end of 1(st) week. At the end of 4(th) week, all cases were fully cured and none of the patient had any recurrences up to 7(th) week. Mean score at 1(st) day (9.6 ± 3.27) was significantly (P < 0.0001) reduced by 7(th) day (1.35 ± 1.19) of treatment. Topical application of tacrolimus ointment is an excellent alternative to anti-allergic and steroids eye drops for the treatment of simple allergic conjunctivitis as it significantly reduces recurrences.

Probable tacrolimus toxicity from tibolone co-administration in a woman: a case report

OpenAIRE

Clark Carolyn J; Hawley Carmel M; Mudge David W

2010-01-01

Abstract Introduction Tibolone is a synthetic steroid, used with increasing frequency to treat symptoms of menopause, including patients with solid-organ transplants who are taking concurrent immune suppression. To the best of our knowledge, there are no reported drug interactions between tibolone and tacrolimus, one of the principal immune suppressants used in kidney transplantation. Case presentation We report the case of a 49-year-old Caucasian woman who had received a kidney transplant an...

High Intrapatient Variability of Tacrolimus Levels and Outpatient Clinic Nonattendance Are Associated With Inferior Outcomes in Renal Transplant Patients

Directory of Open Access Journals (Sweden)

Dawn L. Goodall, MSc

2017-08-01

Conclusions. This study shows that high tacrolimus IPV and clinic nonattendance are associated with inferior allograft survival. Interventions to minimize the causes of high variability, particularly nonadherence are essential to improve long-term allograft outcomes.

Dried blood spot measurement: application in tacrolimus monitoring using limited sampling strategy and abbreviated AUC estimation.

Science.gov (United States)

Cheung, Chi Yuen; van der Heijden, Jaques; Hoogtanders, Karin; Christiaans, Maarten; Liu, Yan Lun; Chan, Yiu Han; Choi, Koon Shing; van de Plas, Afke; Shek, Chi Chung; Chau, Ka Foon; Li, Chun Sang; van Hooff, Johannes; Stolk, Leo

2008-02-01

Dried blood spot (DBS) sampling and high-performance liquid chromatography tandem-mass spectrometry have been developed in monitoring tacrolimus levels. Our center favors the use of limited sampling strategy and abbreviated formula to estimate the area under concentration-time curve (AUC(0-12)). However, it is inconvenient for patients because they have to wait in the center for blood sampling. We investigated the application of DBS method in tacrolimus level monitoring using limited sampling strategy and abbreviated AUC estimation approach. Duplicate venous samples were obtained at each time point (C(0), C(2), and C(4)). To determine the stability of blood samples, one venous sample was sent to our laboratory immediately. The other duplicate venous samples, together with simultaneous fingerprick blood samples, were sent to the University of Maastricht in the Netherlands. Thirty six patients were recruited and 108 sets of blood samples were collected. There was a highly significant relationship between AUC(0-12), estimated from venous blood samples, and fingerprick blood samples (r(2) = 0.96, P AUC(0-12) strategy as drug monitoring.

Immunosuppression Adherence in Stable Kidney Transplant Patients Converted From Immediate- to Prolonged-Release Tacrolimus in Clinical Practice: A Norwegian Study.

Science.gov (United States)

Abedini, Sadollah; Gøransson, Lasse; Cockburn, Elinor; Kilany, Suzanne; Holdaas, Hallvard

2018-02-01

This study investigated medication adherence in kidney transplant patients (KTPs) converted from immediate-release tacrolimus (IR-T) to prolonged-release tacrolimus (PR-T)-based immunosuppression in routine practice. Noninterventional, observational, multicenter study in Norway. Included adult KTPs with stable graft function, converted from IR-T (baseline) to PR-T (1 mg:1 mg) in routine practice. Data were collected at baseline, and months 1, 3, 6, and 12 postconversion. Primary endpoint: adherence using the Basel Assessment of Adherence to Immunosuppressive Medication Scale. Secondary assessments: tacrolimus dose and trough levels (target, 3-7 ng/mL), clinical laboratory parameters (eg, estimated glomerular filtration rate [Modified Diet in Renal Disease]), and adverse events. Ninety-one KTPs (mean ± SD age 47.7 ± 14.3 years) were analyzed. Mean ± SD change in PR-T dose from baseline (4.4 ± 2.4 mg/d) to month 12 was -0.1 ± 0.9 mg/d; mean tacrolimus trough levels remained within target. Overall medication adherence increased from 45.6% at baseline to 58.1% at month 1, but was similar to baseline thereafter; taking and timing adherence followed a similar pattern. Odds ratio (OR) for adherence at month 1 (but not at other time points) was greater versus baseline for overall (OR, 1.71; P = 0.0205), taking (OR, 3.38; P = 0.0004), and timing (OR, 1.77, P = 0.0252) dimensions. Mean ± SD Basel Assessment of Adherence to Immunosuppressive Medication Scale visual analogue scale score at baseline was 96.4 ± 5.5%, and increased postconversion. Estimated glomerular filtration rate remained stable (month 12, 61.6 ± 17.7 mL/min per 1.73 m 2 ), as did other laboratory parameters. Two (2.2%) patients had adverse events considered probably/possibly treatment-related. There was disparity between high, patient-perceived and low, actual adherence. Converting stable KTPs from IR-T to PR-T in routine practice did not impact long-term adherence to immunosuppression; renal

Preparation and characterization of the nanoparticle and nanocomposite by gamma irradiation

International Nuclear Information System (INIS)

Lee, K.P.; Choi, S.H.

2002-01-01

Complete text of publication follows. Nanometer metal particle-organic polymer composites have attracted considerable interests in recent years. These composites not only combine the advantageous properties of metals and polymers but also exhibit many new characters that single-phase materials do not have. They have a wide range of applications including electromagnetic inferences shielding, heat conduction, discharge static electricity, conversion of mechanical to electrical signals, and like. In order to obtain nanocomposite, silver nanoparticle was prepared by γ-irradiation. The obtained Ag nanoparticle was characterized by UV, FT-IR, XRD, SEM, TEM, and etc. The ethylacetate-Ag nanocomposite was prepared by emulsion polymerization. The obtained nanocomposites were characterized by SEM, XRD, and thermal (TGA/DSC) analysis. Furthermore, the CdS nanocomposite was prepared using CdSO 4 and Na 2 SO 4 by γ-irradiation method. The ethylacetate-CdS nanocomposite was also prepared by emulsion polymerization, and characterized by SEM, XRD, and thermal (TGA/DSC) analysis. The application of such prepared metal particle-organic polymer composites in the field of anti-bacterial film, semiconductor film, and fluorescence film may be of interest

Tacrolimus Updated Guidelines through popPK Modeling: How to Benefit More from CYP3A Pre-emptive Genotyping Prior to Kidney Transplantation

Directory of Open Access Journals (Sweden)

Jean-Baptiste Woillard

2017-06-01

Full Text Available Tacrolimus (Tac is a profoundly effective immunosuppressant that reduces the risk of rejection after solid organ transplantation. However, its use is hampered by its narrow therapeutic window along with its highly variable pharmacological (pharmacokinetic [PK] and pharmacodynamic [PD] profile. Part of this variability is explained by genetic polymorphisms affecting the metabolic pathway. The integration of CYP3A4 and CY3A5 genotype in tacrolimus population-based PK (PopPK modeling approaches has been proven to accurately predict the dose requirement to reach the therapeutic window. The objective of the present study was to develop an accurate PopPK model in a cohort of 59 kidney transplant patients to deliver this information to clinicians in a clear and actionable manner. We conducted a non-parametric non-linear effects PopPK modeling analysis in Pmetrics®. Patients were genotyped for the CYP3A4∗22 and CYP3A5∗3 alleles and were classified into 3 different categories [poor-metabolizers (PM, Intermediate-metabolizers (IM or extensive-metabolizers (EM]. A one-compartment model with double gamma absorption route described very accurately the tacrolimus PK. In covariate analysis, only CYP3A genotype was retained in the final model (Δ-2LL = -73. Our model estimated that tacrolimus concentrations were 33% IC95%[20–26%], 41% IC95%[36–45%] lower in CYP3A IM and EM when compared to PM, respectively. Virtually, we proved that defining different starting doses for PM, IM and EM would be beneficial by ensuring better probability of target concentrations attainment allowing us to define new dosage recommendations according to patient CYP3A genetic profile.

Tacrolimus and mycophenolate mofetil after nonmyeloablative matched-sibling donor allogeneic stem-cell transplantations conditioned with fludarabine and low-dose total body irradiation.

Science.gov (United States)

Nieto, Yago; Patton, Nigel; Hawkins, Timothy; Spearing, Ruth; Bearman, Scott I; Jones, Roy B; Shpall, Elizabeth J; Rabinovitch, Rachel; Zeng, Chan; Barón, Anna; McSweeney, Peter A

2006-02-01

We evaluated tacrolimus/mycophenolate mofetil (MMF) for graft-versus-host disease (GVHD) prophylaxis after a nonmyeloablative stem cell transplantation (NST) from a matched sibling donor (MSD). Thirty-two patients (median age, 57 years) with advanced hematologic malignancies, who were poor candidates for a conventional myeloablative transplantation, received fludarabine (30 mg/m(2), day -4 to day -2), total-body irradiation (TBI) (200 cGy, day 0), infusion of donor peripheral blood progenitor cells (day 0), oral tacrolimus 0.06 mg/kg twice daily (from day 3), and oral MMF at 15 mg/kg twice daily (days 0-+27). Tacrolimus was tapered from day +100 to day +180 in those patients with indolent malignancies (n = 25), and from day +35 to day +56 in those with aggressive tumors (n = 7). Regimen toxicities and myelosuppression were mild, allowing 75% of patients to have entirely outpatient transplantations. One patient (3%) experienced a nonfatal graft rejection. Rates of grades II-IV and III-IV acute GVHD were 15.6% and 3%, respectively. Acute GVHD was diagnosed at median day +78 (range, days +31-+84). Extensive chronic GVHD was observed in 10 of 24 evaluable patients (41.6%) at a median onset of day +198 (range, days +128-+277), either spontaneously (n = 5) or elicited after tumor progression (n = 5). Five patients experienced transplantation-related mortality (TRM) (15.6%) from either acute GVHD-related multiorgan failure (MOF) (n = 3) or infectious complications (n = 2). At median follow-up of 19 months (range, 2-41 months), the overall survival, progression-free survival, and disease-free survival rates are 62.5%, 50%, and 40%, respectively. In conclusion, the use of tacrolimus/MMF after MSD NST is associated with encouraging rates of GVHD control.

Spectrally selective paint coatings. Preparation and characterization

Energy Technology Data Exchange (ETDEWEB)

Crnjak Orel, Z.C.; Klanjsek Gunde, M. [National Institute of Chemistry, Hajdrihova 19, SI-1000 Ljubljana (Slovenia)

2001-06-01

Preparation and characterization of spectrally selective paint coating for photothermal solar energy conversion are discussed. The applied methods for preparation of paints with described measurements and calculations of black-pigmented coatings were reviewed. The article represents not only possible future applications but also past and current applications of spectrally selective paint coating which are used all over the world since the 1980s. Spectrally selective paint coatings based on combinations of two types of resins, various types of pigments and three types of silica, were prepared. The influence of pigment type and pigment volume concentration (PVC) was studied by applying the Kubelka-Munk (K-M) theory. The relation between the degrees of dispersion and distribution of pigment particles across the paint layer is discussed in terms of K-M coefficients.

Preparation and Characterization of Sulfonated Poly (ether ether ...

African Journals Online (AJOL)

NJD

2007-08-10

Aug 10, 2007 ... Preparation and Characterization of Sulfonated Poly (ether ... Currently perfluori- ... with phosphoric acid solution according to the method described earlier.11,12 ... where A is the membrane area available for diffusion; CA is.

A comparison of the extended-release and standard-release formulations of tacrolimus in de novo kidney transplant recipients: a 12-month outcome study.

Science.gov (United States)

Fanous, Helen; Zheng, Rebecca; Campbell, Carolyn; Huang, Michael; Nash, Michelle M; Rapi, Lindita; Zaltzman, Jeffrey S; Prasad, G V Ramesh

2013-02-01

BACKGROUND: Limited comparative data are available on the outcomes between extended-release and standard-release tacrolimus when used de novo in kidney transplant recipients (KTRs). METHODS: We identified KTRs transplanted at our institution during 2009-10 routinely prescribed extended-release tacrolimus and compared them with those transplanted during 2008-09 prescribed standard-release tacrolimus. Graft function (eGFR by MDRD-7 equation) at 12 months post-transplant (primary outcome); new-onset diabetes and other cardiovascular risk factors, BK viremia incidence, acute rejection, and graft survival to 12 months (secondary outcomes) were compared by intent-to-treat analysis. Time-to-steady-state concentration and number of dose adjustments required to attain steady state were recorded. RESULTS: There were no important demographic differences between the extended-release (N = 106) and standard-release (N = 95) cohorts. The estimated glomerular filtration rate (eGFR) at 12 months was similar (58.8 ± 17 versus 59.2 ± 18 mL/min/1.73 m(2), P = 0.307). There was no difference in new-onset diabetes (17 versus 20%, P = 0.581), BK viremia (10 versus 7%, P = 0.450), acute rejection (7 versus 16%, P = 0.067) or graft survival (97 versus 95%, P = 0.301). Time-to-steady state was similar (9.2 ± 1.1 versus 8.1 ± 4.7 days, P = 0.490) although extended-release patients required fewer adjustments to attain steady state (1.2 ± 1.7 [0-8] versus 1.7 ± 1.5 [0-7], P = 0.030) but a similar dose (7.2 ± 2.4 [2-17] versus 7 ± 2.7 [2-16] mg/day, P = 0.697). CONCLUSION: De novo KTRs prescribed extended-release or standard-release tacrolimus demonstrate similar 12-month outcomes.

Preparation, characterization and catalytic effects of copper oxalate nanocrystals

International Nuclear Information System (INIS)

Singh, Gurdip; Kapoor, Inder Pal Singh; Dubey, Reena; Srivastava, Pratibha

2012-01-01

Graphical abstract: Prepared copper oxalate nanocrystals were characterized by FE-SEM and bright field TEM micrographs. Its catalytic activity was evaluated on the thermal decomposition of ammonium perchlorate using TG and TG-DSC techniques. Highlights: ► Preparation of nanocrystals (∼9.0 nm) of copper oxalate using Cu(NO 3 ) 2 ·2H 2 O, oxalic acid and acetone under thermal conditions. ► Method is simple and novel. ► Characterization using XRD, SEM, TEM, HRTEM and ED pattern. ► Catalytic activity of copper oxalate nanocrystals on AP thermal decomposition using thermal techniques (TG, TG-DSC and ignition delay). ► Kinetics of thermal decomposition of AP + CONs using isoconversional and model fitting kinetic approaches. - Abstract: Recent work has described the preparation and characterization of copper oxalate nanocrystals (CONs). It was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) and electron diffraction pattern (ED). The catalytic activity of CONs on the thermal decomposition of ammonium perchlorate (AP) and composite solid propellants (CSPs) has been done by thermogravimetry (TG), differential scanning calorimetry (DSC) and ignition delay measurements. Burning rate of CSPs was also found to be enhanced in presence of copper oxalate nanocrystals. Kinetics of thermal decomposition of AP with and without CONs has also been investigated. The model free (isoconversional) and model-fitting kinetic approaches have been applied to data for isothermal TG decomposition.

[Application of Fourier amplitude sensitivity test in Chinese healthy volunteer population pharmacokinetic model of tacrolimus].

Science.gov (United States)

Guan, Zheng; Zhang, Guan-min; Ma, Ping; Liu, Li-hong; Zhou, Tian-yan; Lu, Wei

2010-07-01

In this study, we evaluated the influence of different variance from each of the parameters on the output of tacrolimus population pharmacokinetic (PopPK) model in Chinese healthy volunteers, using Fourier amplitude sensitivity test (FAST). Besides, we estimated the index of sensitivity within whole course of blood sampling, designed different sampling times, and evaluated the quality of parameters' and the efficiency of prediction. It was observed that besides CL1/F, the index of sensitivity for all of the other four parameters (V1/F, V2/F, CL2/F and k(a)) in tacrolimus PopPK model showed relatively high level and changed fast with the time passing. With the increase of the variance of k(a), its indices of sensitivity increased obviously, associated with significant decrease in sensitivity index for the other parameters, and obvious change in peak time as well. According to the simulation of NONMEM and the comparison among different fitting results, we found that the sampling time points designed according to FAST surpassed the other time points. It suggests that FAST can access the sensitivities of model parameters effectively, and assist the design of clinical sampling times and the construction of PopPK model.

Characterization of PAN/ATO nanocomposites prepared by solution ...

Indian Academy of Sciences (India)

Conducting nanocomposites of polyacrylonitrile (PAN) and antimony-doped tin oxide (ATO) were prepared by solution blending. Electrical properties of the nanocomposites were characterized by means of electrical conductivity measurements and the phase structures were investigated via scanning electron microscopy ...

Preparation of surface enhanced Raman substrate and its characterization

Science.gov (United States)

Liu, Y.; Wang, J. Y.; Wang, J. Q.

2017-10-01

Surface enhanced Raman spectroscopy (SERS) is a fast, convenient and highly sensitive detection technique, and preparing the good effect and repeatable substrate is the key to realize the trace amount and quantitative detection in the field of food safety detection. In this paper, a surface enhanced Raman substrate based on submicrometer silver particles structure was prepared by chemical deposition method, and characterized its structure and optical properties.

Preparation and characterization of titania based nanowires

International Nuclear Information System (INIS)

Stengl, Vaclav; Bakardjieva, Snejana; Murafa, Natalie; Vecernikova, Eva; Subrt, Jan; Balek, Vladimir

2007-01-01

A new method for preparation of titania nanowires with diameter around 10 nm and length up to 2-3 μm is described. The precursor was prepared from sodium titanate by adding ethylene glycole (EG) and heating at temperature of 198 deg. C for 6 h under reflux. The sodium titanate glycolate formed by this way aggregated into 1D nanostructures and was subsequently transformed into titania glycolate during a chemical treatment with 98% sulfuric acid. Titania nanowires with variable amount of anatase and rutile were prepared by heating to temperatures in the range 350-1000 deg. C. The precursor as well as titania based samples were characterized by X-ray diffraction, Infrared spectroscopy, Scanning electron microscopy, High resolution transmission microscopy, Thermogravimetry, Differential thermal analysis, Evolved gas analysis and Emanation thermal analysis. The nitrogen adsorption/desorption was used for surface area and porosity determination. The photoactivity of the prepared titania samples was assessed by the photocatalytic decomposition of 4-chlorophenol in an aqueous slurry under UV irradiation of 365 nm wavelength

The Effects of Tacrolimus on T-Cell Proliferation Are Short-Lived: A Pilot Analysis of Immune Function Testing

Directory of Open Access Journals (Sweden)

Benjamin L. Laskin, MD, MS

2017-08-01

Conclusions. T-cell proliferation is currently not suitable to measure immunosuppression because sample processing diminishes observable effects. Future immune function testing should focus on fresh samples with minimal washing steps. Our results also emphasize the importance of adherence to immunosuppressive treatment, because T-cell proliferation recovered substantially after even brief discontinuation of tacrolimus.

Preparation and Characterization of Water-Based Nano-fluids for Nuclear Applications

International Nuclear Information System (INIS)

Williams, W.C.; Forrest, E.; Hu, L.W.; Buongiorno, J.

2006-01-01

As part of an effort to evaluate water-based nano-fluids for nuclear applications, preparation and characterization has been performed for nano-fluids being considered for MIT's nano-fluid heat transfer experiments. Three methods of generating these nano-fluids are available: creating them from chemical precipitation, purchasing the nano-particles in powder form and mixing them with the base fluid, and direct purchase of prepared nano-fluids. Characterization of nano-fluids includes colloidal stability, size distribution, concentration, and elemental composition. Quality control of the nano-fluids to be used for heat transfer testing is crucial; an exact knowledge of the fluid constituents is essential to uncovering mechanisms responsible for heat transport enhancement. Testing indicates that nano-fluids created by mixing a liquid with nano-particles in powder form are often not stable, although some degree of stabilization is obtainable with pH control and/or surfactant addition. Some commercially available prepared nano-fluids have been found to contain unacceptable levels of impurities and/or include a different weight percent of nano-particles compared to vendor specifications. Tools utilized to characterize and qualify nano-fluids for this study include neutron activation analysis (NAA), inductively-coupled plasma spectroscopy (ICP), transmission electron microscopy (TEM) imaging, thermogravimetric analysis (TGA) and dynamic light scattering (DLS). Preparation procedures and characterization results for selected nano-fluids will be discussed in detail. (authors)

Advanced Research Projects Agency on Materials Preparation and Characterization Research

Science.gov (United States)

Briefly summarized is research concerned with such topics as: Preparation of silica glass from amorphous silica; Glass structure by Raman ...ferroelectrics; Silver iodide crystals; Vapor phase growth; Refractory optical host materials; Hydroxyapatite ; Calcite; Characterization of single crystals with a double crystal spectrometer; Characterization of residual strain.

Topical pimecrolimus and tacrolimus do not accelerate photocarcinogenesis in hairless mice after UVA or simulated solar radiation

DEFF Research Database (Denmark)

Lerche, C.M.; Philipsen, P.A.; Poulsen, T.

2009-01-01

in combination with UVA. We used 11 groups of 25 hairless female C3.Cg/TifBomTac immunocompetent mice (n = 275). Pimecrolimus cream or tacrolimus ointment was applied on their dorsal skin three times weekly followed by SSR (2, 4, or 6 standard erythema doses, SED) or UVA (25 J/cm(2)) 3-4 h later. This was done...

Preparation of ceramic materials for surface characterization

International Nuclear Information System (INIS)

Zipperian, D.C.

1989-01-01

This paper discusses how microstructural preparation permits a microscopic analysis of a material's internal structure, which is related to the physical properties of the material. Today, numerous microstructural quantitative and qualitative measurements are commonly utilized. Several of these include phase determination, phase hardness, phase distribution, grain size and shape, and porosity and size distribution. The most widely used surface characterization techniques are optical microscopy, electron microscopy, and x-ray microscopy. Optical microscopy includes both transmitted-and reflected-light techniques and requires a surface preparation prior to analysis. Transmitted-light microscopy samples require thinning and polishing of both sides of the sample, whereas reflected light techniques require polishing of only one side of the sample

Preparation and characterization of cuprous iodide nanoparticles

International Nuclear Information System (INIS)

Hong Tao Li; Li Xia Gu

2007-01-01

A new technique for the preparation of CuI nanoparticles from CuSO 4 and KI ethanol solutions has been developed. Preparation conditions were optimized through a series of experiments. Under these conditions, the yield of CuI reached 95.39%. The product was characterized and the reaction kinetics was studied. The results show that the product takes a roughly spherical shape with an average particle size of less then 50 nm. The activation energy of the formation of CuI is found to be E a = 0.58 x 10 2 kJ/mol, and the preexponential factor in the Arrhenius equation is k 0 = 7.43 x 10 16 mol/(l s) [ru

Preparation and Characterization of Water Based UV Curable ...

African Journals Online (AJOL)

The formulations prepared were characterized for viscosity and FT-IR before being printed on different substrates. The ink films formed were assessed by optical microscopy, the print quality was found to meet most requirements in colour printing chemistry and technology applications. Keywords: Flexographic printing inks, ...

Paradox Basin site characterization report: preparation papers, Gibson Dome location

International Nuclear Information System (INIS)

1982-11-01

This document contains Part C, Identification of Pertinent Issues, of the site characterization report. The site characterization report, preparation papers, includes a description of detailed field studies and efforts to collect data to resolve key geologic and environmental issues in the Gibson Dome location within the Paradox Basin Region of Utah

Hydroxyapatite nanocrystals: Simple preparation, characterization and formation mechanism

International Nuclear Information System (INIS)

Mohandes, Fatemeh; Salavati-Niasari, Masoud; Fathi, Mohammadhossein; Fereshteh, Zeinab

2014-01-01

Crystalline hydroxyapatite (HAP) nanoparticles and nanorods have been successfully synthesized via a simple precipitation method. To control the shape and particle size of HAP nanocrystals, coordination ligands derived from 2-hydroxy-1-naphthaldehyde were first prepared, characterized by Fourier transform infrared (FT-IR) and proton nuclear magnetic resonance ( 1 H-NMR) spectroscopies, and finally applied in the synthesis process of HAP. On the other hand, the HAP nanocrystals were also characterized by several techniques including powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). According to the FE-SEM and TEM micrographs, it was found that the morphology and crystallinity of the HAP powders depended on the coordination mode of the ligands. - Highlights: • HAP nanobundles and nanoparticles have been prepared by a precipitation method. • Morphologies of HAP nanocrystals were controlled by different coordination ligands. • The formation mechanism of hydroxyapatite nanocrystals was also considered

Hydroxyapatite nanocrystals: Simple preparation, characterization and formation mechanism

Energy Technology Data Exchange (ETDEWEB)

Mohandes, Fatemeh [Department of Inorganic Chemistry, Faculty of Chemistry, University of Kashan, Kashan, P. O. Box. 87317-51167, Islamic Republic of Iran (Iran, Islamic Republic of); Salavati-Niasari, Masoud, E-mail: salavati@kashanu.ac.ir [Department of Inorganic Chemistry, Faculty of Chemistry, University of Kashan, Kashan, P. O. Box. 87317-51167, Islamic Republic of Iran (Iran, Islamic Republic of); Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P. O. Box 87317-51167, Islamic Republic of Iran (Iran, Islamic Republic of); Fathi, Mohammadhossein [Biomaterials Research Group, Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111, Islamic Republic of Iran (Iran, Islamic Republic of); Dental Materials Research Center, Isfahan University of Medical Sciences, Isfahan, Islamic Republic of Iran (Iran, Islamic Republic of); Fereshteh, Zeinab [Biomaterials Research Group, Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111, Islamic Republic of Iran (Iran, Islamic Republic of)

2014-12-01

Crystalline hydroxyapatite (HAP) nanoparticles and nanorods have been successfully synthesized via a simple precipitation method. To control the shape and particle size of HAP nanocrystals, coordination ligands derived from 2-hydroxy-1-naphthaldehyde were first prepared, characterized by Fourier transform infrared (FT-IR) and proton nuclear magnetic resonance ({sup 1}H-NMR) spectroscopies, and finally applied in the synthesis process of HAP. On the other hand, the HAP nanocrystals were also characterized by several techniques including powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). According to the FE-SEM and TEM micrographs, it was found that the morphology and crystallinity of the HAP powders depended on the coordination mode of the ligands. - Highlights: • HAP nanobundles and nanoparticles have been prepared by a precipitation method. • Morphologies of HAP nanocrystals were controlled by different coordination ligands. • The formation mechanism of hydroxyapatite nanocrystals was also considered.

Virosome and ISCOM vaccines against Newcastle disease: preparation, characterization and immunogenicity

NARCIS (Netherlands)

Homhuan, A.; Prakongpan, S.; Poomvises, P.; Maas, H.A.; Krommelin, D.; Kersten, G.; Jiskoot, W.

2004-01-01

The purpose of this study was to prepare and characterize virosomes and ISCOMs containing envelope proteins of Newcastle disease virus (NDV) and to evaluate their immunogenicity in target animals (chickens). Virosomes were prepared by solubilization of virus with either Triton X-100 or octyl

Preparation and characterization of dialdehyde starch urea (DASU ...

African Journals Online (AJOL)

Dialdehyde starch urea (DASU) was prepared by the reaction of dialdehyde starch (DAS) from periodate oxidized cassava starch with urea, which was then used to adsorb Co(II), Pb(II) and Zn(II) ions from aqueous solution. Starch modified starches and starch complexes were characterized by Fourier transform infrared ...

Preparation, characterization and utilization of starch nanoparticles.

Science.gov (United States)

Kim, Hee-Young; Park, Sung Soo; Lim, Seung-Taik

2015-02-01

Starch is one of the most abundant biopolymers in nature and is typically isolated from plants in the form of micro-scale granules. Recent studies reported that nano-scale starch particles could be readily prepared from starch granules, which have unique physical properties. Because starch is environmentally friendly, starch nanoparticles are suggested as one of the promising biomaterials for novel utilization in foods, cosmetics, medicines as well as various composites. An overview of the most up-to-date information regarding the starch nanoparticles including the preparation processes and physicochemical characterization will be presented in this review. Additionally, the prospects and outlooks for the industrial utilization of starch nanoparticles will be discussed. Copyright © 2014 Elsevier B.V. All rights reserved.

Preparation and characterization of Bi-2223 tapes

International Nuclear Information System (INIS)

Hense, K.; Kirchmayr, H.; Kovac, P.; Lackner, R.; Mueller, M.; Pachla, W.; Pitel, J.; Polak, M.; Usak, P.

2003-01-01

In a concerted action between Austrian, Slovakian and Polish research institutes Bi-2223 tapes have been prepared and characterized by different physical methods. Metallographic studies by optical as well as electron microscopy, measurements of critical current (angle dependent) and losses have been performed. Properties of individual filaments extracted from multifilamentary tapes were also studied. Uniformity of local I C of these filaments were considerably lower than that of the whole tape. This indicates that improvement of filament homogeneity could improve the over all J C in tapes. The application of these tapes for optimized magnet coils will also be discussed. From these investigations a better understanding of the mechanisms, limiting the critical current could be achieved and more optimized preparation methods can be envisioned

Evaluation of adherence and tolerability of prolonged-release tacrolimus (Advagraf™) in kidney transplant patients in Germany: A multicenter, noninterventional study.

Science.gov (United States)

Lehner, Lukas J; Reinke, Petra; Hörstrup, Jan H; Rath, Thomas; Suwelack, Barbara; Krämer, Bernhard K; Budde, Klemens; Banas, Bernhard

2018-01-01

This study assessed adherence to prolonged-release tacrolimus (PR-T)-based immunosuppression during routine maintenance of renal transplant recipients in Germany. Patients had received PR-T for ≥1 month at inclusion. Data were collected during four visits (V): baseline (V1), 6 (V2), 12 (V3), and 18 (V4) months. Composite primary endpoint: nonadherence at V4, defined as self-reported nonadherence on the Basel Assessment of Adherence with Immunosuppressive Medication Scale (BAASIS © ), investigator-rated nonadherence, and/or V4 tacrolimus trough level outside a predefined range. Secondary endpoints: individual BAASIS items, incidence of rejection, kidney function, and safety. Overall, 153 adult kidney recipients (mean [standard deviation] time post-transplant 5.8 [4.6] years) were included. Nonadherence was high at V4 (67.7% [95% confidence interval 58.9%, 75.6%]). Medication-taking adherence was 86.9% and 91.3% at V1 and V4, respectively; adherence to timing of medication intake was 58.2% and 58.3%, with little evidence of missed doses/drug holidays. Investigators rated adherence "good" in 85.6% of patients (V4). Two (1.3%) patients had acute rejection episodes. Kidney function remained stable (mean creatinine clearance, V1: 62.1 mL/min; V4: 65.3 mL/min). Investigators rated effectiveness of PR-T as "very good"/"good" in 91.5% of patients. Most patients (94.7%) found PR-T dosing more convenient than immediate-release tacrolimus. PR-T was well tolerated with high medication persistence. © 2017 The Authors. Clinical Transplantation Published by John Wiley & Sons Ltd.

Preparation and characterization of depolymerised chitosan films and crosslinked with sodium tripolyphosphate

International Nuclear Information System (INIS)

Salazar, Max Carlos; Valderrama Negron, Ana

2013-01-01

This work has studied the preparation and characterization of chitosan films (CS) crosslinked with sodium tripolyphosphate (TPP), prepared by the solvent evaporation method. Initially we studied the depolymerization of chitosan with sodium nitrite to get different polymer molecular weights in the used polymer. For example, we obtained chitosans of 554.22kDa and 133.37kDa of molecular weight. Afterward, prepared and characterized chitosans films crosslinked with TPP, evidently the hydrogen bridge interaction with the polyanion through IR, SEM, TG; also was performed swelling studies, with the objective of identified the type of kinetic model in which enable explain said phenomenon in these films. (author)

Preparation and Characterization of New Geopolymer-Epoxy Resin Hybrid Mortars

Directory of Open Access Journals (Sweden)

Raffaele Cioffi

2013-07-01

Full Text Available The preparation and characterization of metakaolin-based geopolymer mortars containing an organic epoxy resin are presented here for the first time. The specimens have been prepared by means of an innovative in situ co-reticulation process, in mild conditions, of commercial epoxy based organic resins and geopolymeric slurry. In this way, geopolymer based hybrid mortars characterized by a different content of normalized sand (up to 66% in weight and by a homogeneous dispersion of the organic resin have been obtained. Once hardened, these new materials show improved compressive strength and toughness in respect to both the neat geopolymer and the hybrid pastes since the organic polymer provides a more cohesive microstructure, with a reduced amount of microcracks. The microstructural characterization allows to point out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars and concretes. A correlation between microstructural features and mechanical properties has been studied too.

Tumid Lupus Erythematosus: An Intriguing Dermatopathological Connotation Treated Successfully with Topical Tacrolimus and Hydroxyxhloroquine Combination

Science.gov (United States)

Verma, Prashant; Sharma, Sonal; Yadav, Pravesh; Namdeo, Chaitanya; Mahajan, Garima

2014-01-01

Tumid lupus erythematosus (LE) is a rare variant of lupus erythematosus, which often follows a favorable course. A case of a young woman is illustrated, who presented with an asymptomatic erythematous, solitary plaque over her face. Histopathological and direct immunofluorescence examination established a diagnosis of tumid lupus erythematosus. She responded slowly and near-completely to hydroxychloroquine sulfate; however, a flare up occurred a month later. Addition of topical tacrolimus 0.1% resulted in complete regression without leaving any residual changes. No recurrence was seen subsequently. PMID:24700961

Improved oral absorption of tacrolimus by a solid dispersion with hypromellose and sodium lauryl sulfate.

Science.gov (United States)

Jung, Hyuck Jun; Ahn, Hye In; Park, Ji Yeon; Ho, Myoung Jin; Lee, Dae Ro; Cho, Ha Ra; Park, Jun Seo; Choi, Yong Seok; Kang, Myung Joo

2016-02-01

A novel surfactant-incorporated hydroxypropyl methylcellulose (HPMC) solid dispersion (SD) system was constructed in order to facilitate the release rate and oral absorption of tacrolimus (FK506), a poorly water-soluble immunosuppressant. Several emulsifiers including sodium lauryl sulfate (SLS), as drug release promotors, were employed with HPMC to fabricate SD using the solvent wetting method. The solid state characteristics using differential scanning calorimetry and X-ray powder diffraction, revealed that FK506 was molecularly distributed within all dispersions in amorphous form. The dissolution rates of FK506 in SLS-incorporated SDs were much higher than those in SDs prepared with HPMC alone, and even with stearoyl polyoxyl-32 glycerides or tocopheryl polyethylene glycol 1000 succinate. In particular, the greatest dissolution enhancement was obtained from the SD consisting of the drug, HPMC, and SLS in a weight ratio of 1:1:3, providing a 50-fold higher drug concentration within 15 min, compared with HPMC SD. In vivo absorption study in rats demonstrates that the optimized formula remarkably increased the oral absorption of FK506, providing about 4.0-fold greater bioavailability (p<0.05) compared with the marketed product (Prograf®, Astellas Pharma). These data suggest that a novel SLS/HPMC SD may be an advantageous dosage form of FK506, boosting the dissolution and absorption in gastrointestinal tract. Copyright © 2015 Elsevier B.V. All rights reserved.

Preparation and Characterization of Hydrous Zirconium Oxide Formed by Homogeneous Precipitation

Directory of Open Access Journals (Sweden)

Silva G.L.J.P. da

2002-01-01

Full Text Available This paper reports on the preparation, characterization and study of the ion exchange behavior of hydrous zirconium oxides formed by homogeneous precipitation from zirconium oxychloride. The precipitants used were obtained by thermal decomposition of urea, sodium nitrite or ammonium carbonate. Seven compounds were prepared and characterized by thermal analysis, X-ray diffractometry and by surface area measurements. Amorphous forms were obtained in each case, a result that agrees with those obtained by conventional gel precipitation methodology. All these materials present surface area values of >148 m².g-1, determined after heat treatment at 50 °C. The ion exchange behavior of each hydrous zirconium oxide prepared was studied using K+ as the exchanged species and the results compared with those obtained for hydrous zirconium oxide originally precipitated by the sol gel method.

Preparation and characterization of blends containing silk fibroin and chitosan

International Nuclear Information System (INIS)

Moraes, Mariana A. de; Nogueira, Grinia M.; Weska, Raquel F.; Beppu, Marisa M.

2009-01-01

The aim of this study was to prepare and characterize blend membranes of silk fibroin and chitosan. Moreover, a conformation of fibroin to a more stable form induced by the addition of chitosan was verified. Blend membranes of fibroin/chitosan were prepared in different proportions and had their crystallinity, structural conformation and thermal stability characterized. The results of crystallographic analysis (XRD) indicated the tendency to higher structural organization caused by the addition of chitosan. FTIR showed that, mainly in a content of chitosan of only 25%, fibroin is present in a more stable form. Thermal analyzes indicate that fibroin is thermally stable and that when its proportion in the blend increases, the temperature in which the degradation is initiated also does so. (author)

Characterization of binary gold/platinum nanoparticles prepared by sonochemistry technique

International Nuclear Information System (INIS)

Nakanishi, M.; Takatani, H.; Kobayashi, Y.; Hori, F.; Taniguchi, R.; Iwase, A.; Oshima, R.

2005-01-01

Aqueous solutions with Au 3+ and Pt 4+ ions and additives of surfactants (SDS or PEG-MS) were irradiated with an ultrasound at 200 kHz with an input power of 4.2 W/cm 2 , and colloidal nanoparticles were prepared. The prepared nanoparticles were characterized by XRD, TEM, HRTEM, EDX and 197 Au Moessbauer spectroscopy. It was found that the structures of nanoparticles were changed with the surfactants; Au and Pt nanoparticles were prepared individually by using SDS, and bimetallic Au/Pt alloy nanoparticles with a core-shell structure were produced in the presence of PEG-MS

Preparation and Characterization of Zeolite Membrane for Bioethanol Purification

Directory of Open Access Journals (Sweden)

Aprilina Purbasari

2013-06-01

Full Text Available The use of bioethanol as an alternative fuel with a purity of more than 99.5% wt has prompted research on bioethanol purification. One of the promising methods used for bioethanol purification is pervaporation membrane. This research is aimed to prepare and characterize zeolite membranes for pervaporation membrane. The membrane preparation consisted of two stages, namely support preparation and zeolite deposition on the support. In support preparation, α- alumina and kaolin with specific composition (50:30; 40:40; 50:30 was mixed with additives and water. After pugging and aging process, the mixture became paste and extruded into tubular shape. The tube was then calcined at temperature of 1250 °C for 3 hours. After that, zeolite 4A was deposited on the tubes using clear solution made of 10 %wt zeolite and 90 %wt water and heated at temperature of 80 °C for 3 hours. Furthermore, the resulting zeolite membranes was washed with deionized water for 5 minutes and dried in oven at temperature of 100 °C for 24 hours. Characterization of zeolite membranes included mechanical strength test, XRD, and SEM. In the mechanical strength test, the membrane sample with α- alumina:kaolin = 50:30 (membrane A has the highest mechanical strength of 46.65 N/mm2. Result of XRD analysis for the membrane A indicated that mullite and corundum phases were formed, which mullite phase was more dominant. Meanwhile the result of SEM analysis shows that zeolite crystals have been formed and covered the pores support, but the deposition of zeolite has not been optimal yet. The performance examination for bioethanol purification showed that the membrane could increase the purity of bioethanol from 95% to 98.5% wt. © 2013 BCREC UNDIP. All rights reservedReceived: 23rd October 2012; Revised: 15th February 2013; Accepted: 16th February 2013[How to Cite: Purbasari, A., Istirokhatun, T., Devi, A.M., Mahsunnah, L. , Susanto, H. (2013. Preparation and Characterization of Zeolite

Preparation and characterization of antimony barium composite oxide photocatalysts

Science.gov (United States)

Han, X. P.; Yao, B. H.; Pan, Q. H.; Pen, C.; Zhang, C. L.

2018-01-01

In this paper, two kinds of antimony barium composite oxide photocatalysts have been prepared by two methods and characterized by XRD and SEM. The photocatalytic activity was evaluated by a photocatalytic reactor and an ultraviolet spectrophotometer. The results showed that-BaSb2O5•4H2O, BaSb2O6 two kinds of antimony barium composite oxide photocatalysts were successfully prepared in this experiment and they showed good photocatalytic properties. In addition, BaSb2O6 morphology showed more regular, microstructure and better catalytic performance.

Chitosan-based delivery systems for diclofenac delivery: preparation and characterization

Energy Technology Data Exchange (ETDEWEB)

Dreve, Simina; Kacso, Irina; Bratu, Ioan; Indrea, Emil, E-mail: simina.dreve@itim-cj.r [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath, 400293 Cluj-Napoca (Romania)

2009-08-01

The preparation and characterization of novel materials for drug delivery has rapidly gained importance in development of innovative medicine. The paper concerns the uses of chitosan as an excipient in oral formulations and as a drug delivery vehicle for burnt painful injuries. The use of chitosan (CTS) as base in polyelectrolyte complex systems, to prepare liquid release systems as hydrogels and solid release systems as sponges is presented. In this paper the preparation of CTS hydrogels and sponges carrying diclofenac (DCF), as anti-inflammatory drug is reported. The immobilization of DCF in CTS is done by mixing the CTS hydrogel with the anti-inflammatory drug solutions. The concentration of anti-inflammatory drug in the CTS hydrogel generating the sponges was of 57 mg/l, 72 mg/l and 114 mg/l. The CTS sponges with anti-inflammatory drugs were prepared by freeze-drying at -610{sup 0}C and 0,09 atm. The characterization of the hydrogels and sponges was done by infrared spectra (FTIR) and ultraviolet-visible spectroscopy (UV-VIS). The results indicated the formation of CTS-DCF intermediates. The DCF molecules are forming temporary chelates in CTS hydrogels and sponges and they are compatible with skin or some of biological fluids with satisfactory results.

Chitosan-based delivery systems for diclofenac delivery: preparation and characterization

International Nuclear Information System (INIS)

Dreve, Simina; Kacso, Irina; Bratu, Ioan; Indrea, Emil

2009-01-01

The preparation and characterization of novel materials for drug delivery has rapidly gained importance in development of innovative medicine. The paper concerns the uses of chitosan as an excipient in oral formulations and as a drug delivery vehicle for burnt painful injuries. The use of chitosan (CTS) as base in polyelectrolyte complex systems, to prepare liquid release systems as hydrogels and solid release systems as sponges is presented. In this paper the preparation of CTS hydrogels and sponges carrying diclofenac (DCF), as anti-inflammatory drug is reported. The immobilization of DCF in CTS is done by mixing the CTS hydrogel with the anti-inflammatory drug solutions. The concentration of anti-inflammatory drug in the CTS hydrogel generating the sponges was of 57 mg/l, 72 mg/l and 114 mg/l. The CTS sponges with anti-inflammatory drugs were prepared by freeze-drying at -610 0 C and 0,09 atm. The characterization of the hydrogels and sponges was done by infrared spectra (FTIR) and ultraviolet-visible spectroscopy (UV-VIS). The results indicated the formation of CTS-DCF intermediates. The DCF molecules are forming temporary chelates in CTS hydrogels and sponges and they are compatible with skin or some of biological fluids with satisfactory results.

Tumid lupus erythematosus: An intriguing dermatopathological connotation treated successfully with topical tacrolimus and hydroxyxhloroquine combination

Directory of Open Access Journals (Sweden)

Prashant Verma

2014-01-01

Full Text Available Tumid lupus erythematosus (LE is a rare variant of lupus erythematosus, which often follows a favorable course. A case of a young woman is illustrated, who presented with an asymptomatic erythematous, solitary plaque over her face. Histopathological and direct immunofluorescence examination established a diagnosis of tumid lupus erythematosus. She responded slowly and near-completely to hydroxychloroquine sulfate; however, a flare up occurred a month later. Addition of topical tacrolimus 0.1% resulted in complete regression without leaving any residual changes. No recurrence was seen subsequently.

Simultaneous Determination of Cyclosporine A, Tacrolimus, Sirolimus, and Everolimus in Whole-Blood Samples by LC-MS/MS

Directory of Open Access Journals (Sweden)

Mustafa Karapirli

2012-01-01

Full Text Available Objectives. Cyclosporine A (CyA, tacrolimus (TRL, sirolimus (SIR, and everolimus (RAD are immunosuppressive drugs frequently used in organ transplantation. Our aim was to confirm a robust sensitive and selective liquid chromatography-tandem mass spectrometry (LC-MS/MS method for determination of CyA, TRL, SIR, and RAD in whole-blood samples. Materials and Methods. We used an integrated online solid-phase extraction-LC-MS/MS system and atmospheric pressure ionization tandem mass spectrometry (API-MS/MS in the multiple reaction monitoring (MRM detection mode. CyA, TRL, SIR, and RAD were simultaneously analyzed in whole blood treated with precipitation reagent taken from transplant patients. Results. System performance parameters were suitable for using this method as a high-throughput technique in clinical practice. The high concentration of one analyte in the sample did not affect the concentration of other analytes. Total analytical time was 2.5 min, and retention times of all analytes were shorter than 2 minutes. Conclusion. This LC-MS/MS method can be preferable for therapeutic drug monitoring of these immunosuppressive drugs (CyA, TRL, SRL, and RAD in whole blood. Sample preparation was too short and simple in this method, and it permits robust, rapid, sensitive, selective, and simultaneous determination of these drugs.

Preparation and characterization of thick metastable sputter deposits

International Nuclear Information System (INIS)

Allen, R.P.; Dahlgren, S.D.; Merz, M.D.

1975-01-01

High-rate dc supported-discharge sputtering techniques were developed and used to prepare 0.1 mm to 5.0 mm-thick deposits of a variety of metastable materials including amorphous alloys representing more than 15 different rare-earth-transition metal systems and a wide range of compositions and deposition conditions. The ability to prepare thick, homogeneous deposits has made it possible for the first time to investigate the structure, properties, and annealing behavior of these unique sputtered alloys using neutron diffraction, ultrasonic, and other experimental techniques that are difficult or impractical for thin films. More importantly, these characterization studies show that the structure and properties of the massive sputter deposits are independent of thickness and can be reproduced from deposit to deposit. Other advantages and applications of this metastable materials preparation technique include the possibility of varying structure and properties by control of the deposition parameters and the ability to deposit even reactive alloys with a very low impurity content

Preparation and Characterization of Fluorescent SiO2 Microspheres

Science.gov (United States)

Xu, Cui; Zhang, Hao; Guan, Ruifang

2018-01-01

Fluorescent compound without typical fluorophores was synthesized with citric acid (CA) and aminopropyltriethoxysilane (APTS) firstly, and then it was grafted to the surface of the prepared SiO2 microspheres by chemical reaction. The fluorescent SiO2 microspheres with good fluorescent properties were obtained by optimizing the reaction conditions. And the morphology and structure of the fluorescent SiO2 microspheres have been characterized by scanning electron microscopy (SEM) and fourier transform infrared (FTIR) spectroscopy. The results showed that the preparation of fluorescent SiO2 microspheres have good monodispersity and narrow particle size distribution. Moreover, the fluorescent SiO2 microspheres can be applied to detect Fe3+ in aqueous solution, prepare fluorescent SiO2 rubber, and have potential to be applied in the fluorescent labeling and fingerprint appearing technique fields.

A cohort study on the risk of lymphoma and skin cancer in users of topical tacrolimus, pimecrolimus, and corticosteroids (Joint European Longitudinal Lymphoma and Skin Cancer Evaluation – JOELLE study

Directory of Open Access Journals (Sweden)

Castellsague J

2018-03-01

Full Text Available Jordi Castellsague,1 Josephina G Kuiper,2 Anton Pottegård,3 Ingegärd Anveden Berglind,4 Daniel Dedman,5 Lia Gutierrez,1 Brian Calingaert,6 Myrthe PP van Herk-Sukel,2 Jesper Hallas,3 Anders Sundström,4 Arlene M Gallagher,5 James A Kaye,7 Carolina Pardo,8 Kenneth J Rothman,7 Susana Perez-Gutthann1 1Department of Epidemiology, RTI Health Solutions, Barcelona, Spain; 2Department Research, PHARMO Institute for Drug Outcomes Research, Utrecht, the Netherlands; 3Clinical Pharmacology and Pharmacy, Department of Public Health, University of Southern Denmark, Odense, Denmark; 4Centre for Pharmacoepidemiology, Unit of Clinical Epidemiology, Department of Medicine, Karolinska Institutet, Stockholm, Sweden; 5Clinical Practice Research Datalink, Medicines and Healthcare products Regulatory Agency, London, UK; 6Department Epidemiology, RTI Health Solutions, Research Triangle Park, NC, 7Department of Epidemiology, RTI Health Solutions, Waltham, MA, USA; 8Pharmacovigilance Department, Astellas Pharma Europe B.V., Leiden, the Netherlands Background: There is a concern that topical tacrolimus and pimecrolimus, indicated for second-line treatment of atopic dermatitis, may increase the risk of lymphoma and skin cancer, particularly in children.Objective: The aim of this study was to compare incidence rates (IRs of lymphoma and skin cancer between new users of topical tacrolimus or pimecrolimus and users of moderate- to high-potency topical corticosteroids (TCSs and untreated subjects.Methods: This is a multicenter cohort study with frequency matching by strata of propensity scores in population databases in the Netherlands, Denmark, Sweden, and the UK. IR ratios (IRRs were estimated using Mantel–Haenszel methods for stratified analysis.Results: We included 19,948 children and 66,127 adults initiating tacrolimus, 23,840 children and 37,417 adults initiating pimecrolimus, 584,121 users of TCSs, and 257,074 untreated subjects. IRs of lymphoma per 100,000 person

Preparation and Characterization of Activated Alumina

Science.gov (United States)

Rabia, A. R.; Ibrahim, A. H.; Zulkepli, N. N.

2018-03-01

Activated alumina is a high surface area and highly porous form of aluminum oxide that can be employed for contaminant species adsorb from ether gases or liquids without changing its form. The research in getting this material has generated huge interested. Thus, this paper presented preparation of activated alumina from chemical process. Pure aluminum (99.9% pure) reacted at room temperature with an aqueous NaOH in a reactor to produce a solution of sodium aluminate (NaAlO2). This solution was passed through filter paper and the clear filtrate was neutralized with H2SO4, to pH 6, 7 or 8, resulting in the precipitation of a white gel, Al(OH)3·XH2O. The washed gel for sulfate ions were dried at 80 °C for 6 h, a 60 mesh sieve was to separate and sort them into different sizes. The samples were then calcined (burn) for 3h in a muffle furnace, in air, at a heating rate of 2 °C min-1. The prepared activated alumina was further characterized for better understanding of its physical properties in order to predict its chemical mechanism.

Preparation and characterization of thick BSCCO 2223 films

International Nuclear Information System (INIS)

Ciancio, G; Avila, A; Malachevsky, M.T; Ovidio, C.A

2002-01-01

Among the most widespread applications for critical high-temperature ceramic superconductors are for silver veined tapes, with the superconductor in the middle. These tapes are prepared by the powder- in - tube method. To attain high densities of critical current, the ceramic material must have a certain texture, with the grains oriented with the c axis perpendicular to the direction in which the current circulates. In the system that was studied, the degree of orientation increases as the distance to the vein decreases, with the maximum being in the silver-ceramic inter-phase. Superconductor tapes become inconvenient when defining the ceramic, especially because of the orientation of their plates as a function of the distance to the silver. Although the silver can be dissolved by a chemical attack in order to uncover the ceramic, greater precaution is needed while manipulating the superconductor and obtaining representative data. The behavior of thick films of the compound BSCCO 2223, deposited on silver sheets, forming silver-ceramic composites, was studied. These sheets simulate the silver-ceramic inter-phase and the distribution of the grains towards the center in a thick tape. After the samples were prepared, the phases that were present were characterized by x-ray diffraction and the resulting microstructure was analyzed with a SEM (Scanning Electron Microscope). Its mechanical properties were evaluated, following the formation and propagation of cracks in real time using four point flexion microassays inside the SEM chamber, as well as generating tension-deformation curves. The method of preparation of the thick films is discussed and its influence on the results obtained with the different characterizations (cw)

Analytical performance evaluation of the Elecsys® Cyclosporine and Elecsys® Tacrolimus assays on the cobas e411 analyzer

Directory of Open Access Journals (Sweden)

Maki Sasano

2017-08-01

Full Text Available Background: Cyclosporine (CsA and tacrolimus (TAC are immunosuppressant drugs that are often used to treat autoimmune diseases and as transplantation therapy; therefore, their concentrations need to be monitored carefully. We herein evaluated the analytical performance of the Elecsys® Cyclosporine and Elecsys® Tacrolimus assay kits, which have been newly developed to measure CsA and TAC concentrations in the whole blood. Methods: We used residual whole blood samples from autoimmune disease and transplantation patients who were being treated with CsA or TAC. CsA concentrations were measured using an affinity chrome-mediated immunoassay (ACMIA and an electrochemiluminescence immunoassay (ECLIA. TAC concentrations were measured using a chemiluminescence immunoassay (CLIA and ECLIA. We investigated assay precision, linearity, lower limit of quantitation (LOQ, stability of calibration, influence of interference substances and the hematocrit, correlation of ACMIA with ECLIA, and correlation of CLIA with ECLIA. Results: Within-assay coefficients of variation were 1.8−3.6% (CsA: 94−1238 ng/mL and 2.9−3.9% (TAC: 2.1−17.8 ng/mL, whereas day-to-day coefficients of variation ranged between 3.0−4.1% (CsA and 2.8−3.9% (TAC. The limits of quantitation were defined as the concentration at which the CV was approximately 10%. Each lower LOQ obtained was 16 ng/mL (CsA, and 0.95 ng/mL (TAC. CsA and TAC calibrations were stable for at least 21 days. Neither the presence of conjugated bilirubin, unconjugated bilirubin, chyle, and rheumatoid factor nor the hematocrit affected these assays. A method comparison using a standardized major axis regression analysis of ACMIA and ECLIA was r=0.995, y=0.924x −1.175, n=200 (CsA, while that of CLIA and ECLIA was r=0.994, y=1.080x −0.197, n=200 (TAC. Conclusions: The analytical performances of the Elecsys® Cyclosporine and Elecsys®Tacrolimus assays were acceptable

Formation and characterization of vitreous materials prepared by the sol-gel technique

International Nuclear Information System (INIS)

Martinez, J.R.; Ruiz, J.F.; Cruz M, J.A. de la; Villasenor G, P.

1999-01-01

A full process of preparation and characterization of silica gel, which can be implemented in a experimental course for undergraduate laboratories is presented. Samples of silica gel and sol-gel derived SiO 2 films on glass substrates were fabricated and characterized using atomic force microscopy, Raman and Infrared absorption techniques. Raman and Infrared spectroscopy were used to analyze the local structure. The microstructure characteristics of the films, fabricated by dip-coating, were monitored using atomic force microscopy. The samples were prepared from alcoholic solutions of tetraethylortosilicate (TEOS) keeping the H 2 O/TEOS and Et-OH/TEOS molar ratios constant and equal to 11.66 and 4 respectively. (Author)

Preparation, characterization and antimicrobial efficiency of Ag/PDDA-diatomite nanocomposite.

Science.gov (United States)

Panáček, Aleš; Balzerová, Anna; Prucek, Robert; Ranc, Václav; Večeřová, Renata; Husičková, Vendula; Pechoušek, Jiří; Filip, Jan; Zbořil, Radek; Kvítek, Libor

2013-10-01

Nanocomposites consisting of diatomaceous earth particles and silver nanoparticles (silver NPs) with high antimicrobial activity were prepared and characterized. For the purpose of nanocomposite preparation, silver NPs with an average size of 28nm prepared by modified Tollens process were used. Nanocomposites were prepared using poly(diallyldimethylammonium) chloride (PDDA) as an interlayer substance between diatomite and silver NPs which enables to change diatomite original negative surface charge to positive one. Due to strong electrostatic interactions between negatively charged silver NPs and positively charged PDDA-modified diatomite, Ag/PDDA-diatomite nanocomposites with a high content of silver (as high as 46.6mgAg/1g of diatomite) were prepared. Because of minimal release of silver NPs from prepared nanocomposites to aqueous media (<0.3mg Ag/1g of nanocomposite), the developed nanocomposites are regarded as a potential useful antimicrobial material with a long-term efficiency showing no risk to human health or environment. All the prepared nanocomposites exhibit a high bactericidal activity against Gram-negative and Gram-positive bacteria and fungicidal activity against yeasts at very low concentrations as low as 0.11g/L, corresponding to silver concentration of 5mg/L. Hence, the prepared nanocomposites constitute a promising candidate suitable for the microbial water treatment in environmental applications. Copyright © 2013 Elsevier B.V. All rights reserved.

Preparation and characterization of the fish reference material

International Nuclear Information System (INIS)

Ulrich, Joao Cristiano

2011-01-01

The certified reference materials (CRMs) play an important role in obtaining measurement results traceable to the International System of Units, through an unbroken chain of comparisons. Thus, the demand for new certified reference materials (CRMs) increases every day in all areas of knowledge. The availability of reference materials, mainly in Brazil is still incipient, given that the demand far exceeds the available variety of these materials. The amount of certified reference materials available in the country is insufficient to meet the need of the scientific community and demands for development of new methodologies. Among the many areas in need of reference materials, we highlight the importance for the food trade balance for these products within the country. The certification of food products, intended both for export and for domestic consumption, requires analysis methods that provide precise and accurate results to ensure product quality. This paper describes the preparation and certification of a reference material in the fish matrix in mercury and methylmercury. The study brings together since the stage of material selection, preparation, development of homogeneity and stability studies and characterization. The certification was performed by means of measurements using two analytical techniques, flow injection analysis - cold vapor atomic absorption spectrometry (FIA-CV-AAS) and isotope dilution applied to mass spectrometry (IDMS), which is a primary method. In this work the standards of the ISO 30 (ABNT 30-34) and ISO Guide 35 was used as the basis for the preparation and characterization of the material. For the calculation of uncertainties was used the GUM and Eurachem guide. As a result, was produced and certified a lot of material in relation to the concentration of mercury (Hg = 0.271 ± 0.057 mg g -1 ) and methylmercury (MeHg = 0.245 ± 0.038 mg g -1 ), and informational values of lead and arsenic. (author)

Hydroxyapatite nanocrystals: simple preparation, characterization and formation mechanism.

Science.gov (United States)

Mohandes, Fatemeh; Salavati-Niasari, Masoud; Fathi, Mohammadhossein; Fereshteh, Zeinab

2014-12-01

Crystalline hydroxyapatite (HAP) nanoparticles and nanorods have been successfully synthesized via a simple precipitation method. To control the shape and particle size of HAP nanocrystals, coordination ligands derived from 2-hydroxy-1-naphthaldehyde were first prepared, characterized by Fourier transform infrared (FT-IR) and proton nuclear magnetic resonance ((1)H-NMR) spectroscopies, and finally applied in the synthesis process of HAP. On the other hand, the HAP nanocrystals were also characterized by several techniques including powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). According to the FE-SEM and TEM micrographs, it was found that the morphology and crystallinity of the HAP powders depended on the coordination mode of the ligands. Copyright © 2014 Elsevier B.V. All rights reserved.

The calcineurin pathway inhibitor tacrolimus enhances the in vitro activity of azoles against Mucorales via apoptosis.

Science.gov (United States)

Shirazi, F; Kontoyiannis, D P

2013-09-01

The calcineurin pathway regulates antifungal drug resistance and the virulence of several major human-pathogenic fungi, including the recalcitrant Mucorales. We hypothesized that the fungistatic triazoles posaconazole (PCZ) and itraconazole (ICZ) become fungicidal in the setting of the calcineurin inhibitor tacrolimus (TCR) and that such an effect is mediated through apoptosis. Fungicidal activity and apoptosis were studied using standard microbiological techniques and hyphal metabolic and vital dye reduction assays at 37°C in RPMI 1640. Apoptosis was characterized by detecting intracellular Ca(2+), phosphatidylserine (PS) externalization, DNA fragmentation, plasma membrane integrity, chromatin condensation, reactive oxygen species (ROS) generation, caspase-like activity, ATP, and cytochrome c release. MICs for PCZ and ICZ alone were significantly higher (8 to 128 μg/ml) than those of PCZ or ICZ plus TCR (0.25 to 4 μg/ml) for Rhizopus oryzae, Cunninghamella bertholletiae, and Mucor circinelloides. Both PCZ and ICZ in combination with TCR became fungicidal, and their activity was mediated through increased apoptotic cell death of R. oryzae (10 to 50%), C. bertholletiae (5 to 50%), and M. circinelloides (5 to 55%) germlings, with morphological apoptotic changes characterized by externalization of PS, nuclear condensation, and DNA fragmentation. Moreover, activation of the caspase-like activity was correlated with cell death induced by TCR plus PCZ or ICZ. These changes correlated with elevated intracellular Ca(2+) and ROS levels and disturbance of mitochondrial potential. We found that PCZ or ICZ in combination with TCR renders Mucorales sensitive to triazoles via apoptotic death. These observations could serve as a new paradigm for the development of new therapeutic strategies.

Preparation and characterization of Sb2Se3 devices for memory applications

Science.gov (United States)

Shylashree, N.; Uma B., V.; Dhanush, S.; Abachi, Sagar; Nisarga, A.; Aashith, K.; Sangeetha B., G.

2018-05-01

In this paper, A phase change material of Sb2Se3 was proposed for non volatile memory application. The thin film device preparation and characterization were carried out. The deposition method used was vapor evaporation technique and a thickness of 180nm was deposited. The switching between the SET and RESET state is shown by the I-V characterization. The change of phase was studied using R-V characterization. Different fundamental modes were also identified using Raman spectroscopy.

Incidence of Posttransplantation Diabetes Mellitus in De Novo Kidney Transplant Recipients Receiving Prolonged-Release Tacrolimus-Based Immunosuppression With 2 Different Corticosteroid Minimization Strategies: ADVANCE, A Randomized Controlled Trial.

Science.gov (United States)

Mourad, Georges; Glyda, Maciej; Albano, Laetitia; Viklický, Ondrej; Merville, Pierre; Tydén, Gunnar; Mourad, Michel; Lõhmus, Aleksander; Witzke, Oliver; Christiaans, Maarten H L; Brown, Malcolm W; Undre, Nasrullah; Kazeem, Gbenga; Kuypers, Dirk R J

2017-08-01

ADVANCE (NCT01304836) was a phase 4, multicenter, prospectively randomized, open-label, 24-week study comparing the incidence of posttransplantation diabetes mellitus (PTDM) with 2 prolonged-release tacrolimus corticosteroid minimization regimens. All patients received prolonged-release tacrolimus, basiliximab, mycophenolate mofetil and 1 bolus of intraoperative corticosteroids (0-1000 mg) as per center policy. Patients in arm 1 received tapered corticosteroids, stopped after day 10, whereas patients in arm 2 received no steroids after the intraoperative bolus. The primary efficacy variable was the diagnosis of PTDM as per American Diabetes Association criteria (2010) at any point up to 24 weeks postkidney transplantation. Secondary efficacy variables included incidence of composite efficacy failure (graft loss, biopsy-proven acute rejection or severe graft dysfunction: estimated glomerular filtration rate (Modification of Diet in Renal Disease-4) <30 mL/min per 1.73 m), acute rejection and graft and patient survival. The full-analysis set included 1081 patients (arm 1: n = 528, arm 2: n = 553). Baseline characteristics and mean tacrolimus trough levels were comparable between arms. Week 24 Kaplan-Meier estimates of PTDM were similar for arm 1 versus arm 2 (17.4% vs 16.6%; P = 0.579). Incidence of composite efficacy failure, graft and patient survival, and mean estimated glomerular filtration rate were also comparable between arms. Biopsy-proven acute rejection and acute rejection were significantly higher in arm 2 versus arm 1 (13.6% vs 8.7%, P = 0.006 and 25.9% vs 18.2%, P = 0.001, respectively). Tolerability profiles were comparable between arms. A prolonged-release tacrolimus, basiliximab, and mycophenolate mofetil immunosuppressive regimen is efficacious, with a low incidence of PTDM and a manageable tolerability profile over 24 weeks of treatment. A lower incidence of biopsy-proven acute rejection was seen in patients receiving corticosteroids tapered over 10

Tricalcium phosphate powder: Preparation, characterization and compaction abilities

Directory of Open Access Journals (Sweden)

Abida Fatima

2017-02-01

Full Text Available In this work, we characterize tricalcium phosphate powders Ca9(HPO4(PO45(OH resulting from a reaction between calcium hydroxide and orthophosphoric acid at room temperature, without pH adjustment and in absence of ionic impurities. The prepared powder has an atomic ratio Ca/P of 1.512 ± 0.005. The real density is 2.68 ± 0.02 g/cm3 and the specific surface area is 80 ± 02 m2/g. During compression, the microstructure of Ca-deficient apatite powder with the presence of HPO4 groups seems to support the cohesion between particles. The transmission ratio is 90%, the transfer ratio is 41.8 and the ratio of the die-wall friction is 0.22. These results show that apatitic tricalcium powder gives a good aptitude to the compaction which leads to a good tensile strength (0.79 MPa. The heat treatment of the prepared powder shows the precise temperature for the formation of pyrophosphate, β-TCP and α-TCPa phases.  The purity and aptitude to compaction of the prepared powders are very promising for pharmaceutical and medical applications.

Development and Physicochemical Characterization of Sirolimus Solid Dispersions Prepared by Solvent Evaporation Method

Directory of Open Access Journals (Sweden)

Shahram Emami

2014-12-01

Full Text Available Purpose: The aim of the present investigation was preparation and characterization of sirolimus solid dispersions by solvent evaporation technique to improve its dissolution properties. Methods: Polyvinylpyrrolidone (PVP, Poloxamer 188 and Cremophore RH40 were used to prepare the solid dispersions of sirolimus. In vitro dissolution study using USP type I apparatus, were performed in distilled water (containing SLS 0.4% for pure sirolimus, physical mixtures, Rapamune and prepared solid dispersions. The characterization of solid dispersions was performed using Fourier Transform Infrared (FTIR Spectroscopy and Differential Scanning Calorimetry (DSC. Results: More than 75% of sirolimus was released within 30 minutes from all prepared solid dispersions. The dissolution rate of all prepared solid dispersion powders were more than physical mixtures. The absence of sirolimus peak in the DSC spectrum of solid dispersions indicated the conversion of crystalline form of sirolimus into amorphous form. The results from FT-IR spectroscopy showed that there was no significant change in the FT-IR spectrum of solid dispersions indicating absence of well-defined interaction between drug and carriers. Conclusion: It was concluded that solid dispersion method, using PVP, Poloxamer 188 and Cremophore RH40 can improve dissolution rate of sirolimus.

Effects of topical corticosteroid and tacrolimus on ceramides and irritancy to sodium lauryl sulphate in healthy skin

DEFF Research Database (Denmark)

Jungersted, Jakob Mutanu; Høgh, Julie Kaae; Hellegren, Lars I

2011-01-01

twice daily for one week with betamethasone, tacrolimus, emollient, or left untreated, respectively. After one week each area was challenged with a 24 h sodium lauryl sulphate patch test. The lipids were collected using the cyanoacrylate method and evaluated by high performance thin layer chromatography......The skin barrier, located in the stratum corneum, is influenced mainly by the lipid and protein composition of this layer. In eczematous diseases impairment of the skin barrier is thought to be of prime importance. Topical anti-inflammatory drugs and emollients are the most widely used eczema...

Preparation and characterization of the adducts between lanthanide methanesulfonates and thioxane oxide

International Nuclear Information System (INIS)

Castro e Silva, E. de.

1983-01-01

The preparation and characterization of the adduct between lanthanide methanesulphonates and thioxane oxide are presented. The compounds characterization by conductance measurements, X-ray powder patterns, infrared, visible and fluorescence spectra, TG, DTG and DTA curves was made. According to the X-ray patterns, three isomorphous series were obtained: a-La-Gd b-Tb-Dy and c-Ho-Lu, Y. (M.J.C.) [pt

Preparation and characterization of thin-film Pd–Ag supported membranes for high-temperature applications

NARCIS (Netherlands)

Fernandez Gesalaga, Ekain; Coenen, Kai; Helmi Siasi Farimani, Arash; Melendez, J.; Zuniga, Jon; Pacheco Tanaka, David Alfredo; van Sint Annaland, Martin; Gallucci, Fausto

2015-01-01

This paper reports the preparation, characterization and stability tests of thin-film Pd–Ag supported membranes for high-temperature fluidized bed membrane reactor applications. Various thin-film supported membranes have been prepared by simultaneous Pd–Ag electroless plating and have been initially

Preparation and characterization of some pyridine-2,6-dicarboxylato thorium(IV) complexes

Energy Technology Data Exchange (ETDEWEB)

Degetto, S; Baracco, L [Consiglio Nazionale delle Ricerche, Padua (Italy). Lab. di Chimica e Tecnologia dei Radioelementi; Graziani, R [Padua Univ. (Italy). Istituto di Chimica Generale ed Inorganica; Celon, E [Padua Univ. (Italy). Istituto di Chimica Organica

1978-12-01

The preparation of complexes of pyridine-2,6-dicarboxylic acid (H/sub 2/PDC) with thorium(IV) is reported and discussed. The reactivity of Th(PDC)/sub 2/(H/sub 2/O)/sub 4/ was tested by preparing adducts with some neutral ligands. The complexes were characterized by i.r. spectroscopy, elemental analysis and thermal behaviour. Preliminary information on the structure obtained by x-ray analysis is also reported.

Preparation and characterization of ultra-thin sol-gel films

International Nuclear Information System (INIS)

Shapiro, Leora; Marx, Sharon; Mandler, Daniel

2007-01-01

The formation and characterization of nanometer thick sol-gel films are reported. The films were prepared by spin-coating of a diluted solution of a silane precursor on a number of different substrates. The effect of dilution, rotation speed and nature of substrate on the thickness and homogeneity of the films was examined. Characterization of the films was carried out by profilometry, reflectance spectroscopy, atomic force microscopy, adhesion test and electrochemistry. We find that the dilution factor has a pronounced effect on the film thickness. Moreover, the time of dilution, namely, whether dilution was carried out before or after a period of hydrolysis, has a noticeable effect on the thickness as well as on the permeability of embedded species

Preparation and characterization of exfoliated polyaniline/montmorillonite nanocomposites

International Nuclear Information System (INIS)

Narayanan, Binitha N.; Koodathil, Ranjana; Gangadharan, Tripti; Yaakob, Zahira; Saidu, Femina K.; Chandralayam, Soumini

2010-01-01

Transition metal ions were exchanged with the interlamellar cations of montmorillonite clays and polymerization of aniline was done within the layers. The delaminated clay layers upon ion exchange resulted in exfoliated polyaniline/clay nanocomposite formation which has profound effects on polymer structure, properties and electrical conduction mechanisms. Here we offer polyaniline (PANI)/montmorillonite exfoliated nanocomposite synthesized through a simple, cheap route which need not require complicated and less economical organophilic modification. The prepared composites were characterized using XRD, FTIR, and TG/DTA to prove exfoliation.

Preparation and characterization of exfoliated polyaniline/montmorillonite nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Narayanan, Binitha N., E-mail: binithann@yahoo.co.i [Department of Chemistry, Sree Neelakanta Government Sanskrit College, Pattambi, Palakkad 679306, Kerala (India); Department of Chemical and Process Engineering, Faculty of Engineering, National University of Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Koodathil, Ranjana; Gangadharan, Tripti [Department of Chemistry, Sree Neelakanta Government Sanskrit College, Pattambi, Palakkad 679306, Kerala (India); Yaakob, Zahira [Department of Chemical and Process Engineering, Faculty of Engineering, National University of Malaysia, 43600 UKM Bangi, Selangor (Malaysia); Saidu, Femina K.; Chandralayam, Soumini [Department of Chemistry, Sree Neelakanta Government Sanskrit College, Pattambi, Palakkad 679306, Kerala (India)

2010-04-15

Transition metal ions were exchanged with the interlamellar cations of montmorillonite clays and polymerization of aniline was done within the layers. The delaminated clay layers upon ion exchange resulted in exfoliated polyaniline/clay nanocomposite formation which has profound effects on polymer structure, properties and electrical conduction mechanisms. Here we offer polyaniline (PANI)/montmorillonite exfoliated nanocomposite synthesized through a simple, cheap route which need not require complicated and less economical organophilic modification. The prepared composites were characterized using XRD, FTIR, and TG/DTA to prove exfoliation.

Preparation and characterization of bentonite organo clay

International Nuclear Information System (INIS)

Bertagnolli, C.; Almeida Neto, A.F.; Silva, M.G.C.

2009-01-01

Bentonite clays organically modified have great potential use for environmental remediation, especially in the separation of organic compounds from the water. The aim of this work was the preparation of organophilic clays from 'Verde-Lodo' bentonite clay with the quaternary ammonium salts cetyl-pyridinium chloride and benzalkonium chloride. The materials obtained were characterized by XRD, thermogravimetric analyses, Helium picnometry, SEM and energy dispersive X-ray techniques. The results show consistently successful synthesis of the organoclay through the increase in the basal spacing, as well as salt elimination picks and presence of carbon and chlorine in the modified clays; they are inexistent elements in the natural clay. (author)

Analytical characterization of high-level mixed wastes using multiple sample preparation treatments

International Nuclear Information System (INIS)

King, A.G.; Baldwin, D.L.; Urie, M.W.; McKinley, S.G.

1994-01-01

The Analytical Chemistry Laboratory at the Pacific Northwest Laboratory in Richland, Washington, is actively involved in performing analytical characterization of high-level mixed waste from Hanford's single shell and double shell tank characterization programs. A full suite of analyses is typically performed on homogenized tank core samples. These analytical techniques include inductively-coupled plasma-atomic emission spectroscopy, total organic carbon methods and radiochemistry methods, as well as many others, all requiring some type of remote sample-preparation treatment to solubilize the tank sludge material for analysis. Most of these analytical methods typically use a single sample-preparation treatment, inherently providing elemental information only. To better understand and interpret tank chemistry and assist in identifying chemical compounds, selected analytical methods are performed using multiple sample-preparation treatments. The sample preparation treatments used at Pacific Northwest Laboratory for this work with high-level mixed waste include caustic fusion, acid digestion, and water leach. The type of information available by comparing results from different sample-prep treatments includes evidence for the presence of refractory compounds, acid-soluble compounds, or water-soluble compounds. Problems unique to the analysis of Hanford tank wastes are discussed. Selected results from the Hanford single shell ferrocyanide tank, 241-C-109, are presented, and the resulting conclusions are discussed

Budget impact of switching from an immediate-release to a prolonged-release formulation of tacrolimus in renal transplant recipients in the UK based on differences in adherence

Directory of Open Access Journals (Sweden)

Muduma G

2014-03-01

Full Text Available Gorden Muduma,1 Isaac Odeyemi,1 Jayne Smith-Palmer,2 Richard F Pollock21Astellas Pharma Europe, Chertsey, UK; 2Ossian Health Economics and Communications, Basel, SwitzerlandBackground and aims: Advagraf is a once-daily prolonged-release formulation of tacrolimus with proven noninferiority to Prograf, a twice-daily immediate-release formulation of tacrolimus, in biopsy-proven acute rejection, graft survival and patient survival in renal transplant recipients. Advagraf is associated with improved adherence compared with Prograf, which may ultimately improve long-term outcomes. The present study assessed the budget impact of switching patients from Prograf to Advagraf in the UK.Materials and methods: A budget-impact model was constructed based on published data on acute rejection, graft failure, and mortality in the UK setting. Patients were assumed to convert from Prograf to Advagraf on a 1:1 milligram:milligram basis. In a study comparing the adherence rates between once-daily versus twice-daily formulations of tacrolimus, the proportion of patients taking the prescribed number of daily doses was 88.2% in Advagraf patients and 78.8% in Prograf patients. The model applied a relative risk of graft failure of 3.47 to nonadherent patients based on data from a 2004 meta-analysis (based on graft-failure rates of 1.3%–40.0% in adherent patients, compared with 6.1%–100% in nonadherent patients. Cost data were taken from the March 2013 British National Formulary and 2012–2013 National Health Service tariff information. The analysis was performed over a 5-year time horizon and future costs were not discounted, in line with International Society for Pharmacoeconomics and Outcomes Research guidelines.Results: Over a 5-year time horizon, the mean cost per patient (including tacrolimus, concomitant immunosuppressive medications, dialysis after graft failure, and treatment for acute rejection was £29,328 (standard deviation [SD] £2,844 for Advagraf

Preparation, characterization and application of some anti- corrosive molybdate pigments

International Nuclear Information System (INIS)

Abd El-Ghaffar, M.A.; El-Sawy, S.M.; Ahmed, N.M.

2005-01-01

Some molybdate pigments of single and mixed metal ions, namely, zinc, calcium and zinc-calcium molybdates were prepared, characterized and evaluated according to international standard methods. The evaluated pigments were incorporated in some paint formulations. The physicomechanical, chemical and corrosion protective properties of the paint films were measured; this was done in comparison with a commercial imported molybdate pigment. It was found that, the prepared pigments under investigation are fine white crystalline powders of suitable pigment properties. They can be successfully used as environmentally acceptable anti corrosive pigments. They can replace satisfactorily the similar commercial imported pigment and possess adequate or superior properties against corrosion

Preparation and Characterization of Membranes Formed by Nonsolvent Induced Phase Separation: A Review

KAUST Repository

Guillen, Gregory R.

2011-04-06

The methods and mechanisms of nonsolvent induced phase separation have been studied for more than fifty years. Today, phase inversion membranes are widely used in numerous chemical industries, biotechnology, and environmental separation processes. The body of knowledge has grown exponentially in the past fifty years, which suggests the need for a critical review of the literature. Here we present a review of nonsolvent induced phase separation membrane preparation and characterization for many commonly used membrane polymers. The key factors in membrane preparation discussed include the solvent type, polymer type and concentration, nonsolvent system type and composition, additives to the polymer solution, and film casting conditions. A brief introduction to membrane characterization is also given, which includes membrane porosity and pore size distribution characterization, membrane physical and chemical properties characterization, and thermodynamic and kinetic evaluation of the phase inversion process. One aim of this review is to lay out the basics for selecting polymer solvent nonsolvent systems with appropriate film casting conditions to produce membranes with the desired performance, morphology, and stability, and to choose the proper way to characterize these properties of nonsolvent induced phase inversion membranes. © 2011 American Chemical Society.

Preparation and characterization of uranium alkoxides through oxidation of uranium metal

International Nuclear Information System (INIS)

Gordon, P.L.; Sauer, N.N.; Burns, C.J.; Watkin, J.G.; Van Der Sluys, W.G.

1993-01-01

Currently the authors are investigating the preparation of halide-containing uranium alkoxides by simultaneous halogen and alcohol oxidation of uranium metal. They recently reported the formation of U 2 I 4 (O-i-Pr) 4 (HO-i-Pr) 2 which upon addition of excess isopropanol forms UI 2 (O-i-Pr) 2 (HO-i-Pr) 2 . They report further characterization and reactivity for this monomeric species. Attempts to prepare similar complexes are being made using chlorine gas in the presence of other alcohols. They describe this ongoing research

Preparation and Characterization of a Calcium Carbonate Aerogel

Directory of Open Access Journals (Sweden)

Johann Plank

2009-01-01

Full Text Available We report on a facile method for the preparation of a calcium carbonate aerogel consisting of aggregated secondary vaterite particles with an approximate average diameter of 50 nm. It was synthesized via a sol-gel process by reacting calcium oxide with carbon dioxide in methanol and subsequent supercritical drying of the alcogel with carbon dioxide. The resulting monolith was opaque, brittle and had overall dimensions of 6×2×1 cm. It was characterized by X-ray powder diffraction, nitrogen adsorption method (BET, and scanning electron microscopy.

High-performance liquid chromatography-tandem mass spectrometry as a reference for analysis of tacrolimus to assess two immunoassays in patients with liver and renal transplants.

Science.gov (United States)

Salm, P; Taylor, P J; Clark, A; Balderson, G A; Grygotis, A; Norris, R L; Lynch, S V; Shaw, L M; Pond, S M

1997-12-01

The accuracy and imprecision of three assays used for therapeutic monitoring of tacrolimus were tested using blood-containing weighed-in amounts of the drug, an enzyme-linked immunosorbent assay (ELISA), a microparticle enzyme immunoassay (MEIA I), and a high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS2) assay. Accuracy was acceptable for the HPLC-MS2 assay at all concentrations tested (ELISA at 1.0 and 4.0 microg/l. Accuracy was not acceptable for the ELISA at 15.0 and 50.0 microg/l or for the MEIA I at all concentrations tested. Imprecision was acceptable for the HPLC-MS2 assay at all concentrations tested (coefficient of variation ELISA at 15.0 and 50.0 microg/l, and for the MEIA I at 15.0 and 50.0 microg/l. Imprecision was not acceptable for the ELISA at 1.0 and 4.0 microg/l or for the MEIA I at 1.0 and 4.0 microg/l. This assessment with weighed-in amounts of tacrolimus verified the HPLC-MS2 assay as a reference method. The performance of the two immunoassays with HPLC-MS2 was then compared in the clinical setting using blood from patients with liver (n = 30) and renal (n = 37) transplants. In the liver transplant group (127 samples), the range of tacrolimus concentrations measured by HPLC-MS2, ELISA, and MEIA I was 1.9 to 31.8, 2.1 to 35.0, and less than 0.1 to 36.5 mg/l, respectively. In the renal transplant group (129 samples), the ranges were 1.7 to 26.1, 1.9 to 24.4, and 0.9 to 28.5 microg/l, respectively. Compared with the HPLC-MS2, the ELISA had minimal bias (0.1 to 0.2 microg/l) but unacceptable variability in values (SD > 13%). The MEIA I had unacceptable bias (1.7-1.8 microg/l) and variability (SD > 23%). These data indicated that neither the ELISA nor MEIA I is interchangeable with HPLC-MS2. Moreover, in view of the current trend to reduce the therapeutic dose of tacrolimus, quantitative results using the MEIA I would not be obtainable during therapeutic drug monitoring in some patients in whom effective therapeutic

Preparation and characterization of polymer nanocomposites based on chitosan and clay minerals

International Nuclear Information System (INIS)

Fiori, Ana Paula Santos de Melo; Gabiraba, Victor Parizio; Praxedes, Ana Paula Perdigao; Nunes, Marcelo Ramon da Silva; Balliano, Tatiane L.; Silva, Rosanny Christhinny da; Tonholo, Josealdo; Ribeiro, Adriana Santos

2014-01-01

In this work nanocomposites based on chitosan and different clays were prepared using polyethyleneglycol (PEG) as plasticizer. The samples obtained were characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), thermogravimetric analysis (TGA/DTG) and by mechanical characterization (tensile test) with the aim of investigating the interactions between chitosan and clay. The nanocomposite films prepared using sodium bentonite (Ben) showed an increase of 81.2% in the maximum tensile stress values and a decrease of 16.0% in the Young’s modulus when compared to the chitosan with PEG (QuiPEG) films, evidencing that the introduction of the clay into the polymer matrix provided a more flexible and resistant film, whose elongation at break was 93.6% higher than for the QuiPEG film. (author)

Characterization of primary and secondary cultures of astrocytes prepared from mouse cerebral cortex

DEFF Research Database (Denmark)

Skytt, Dorte Marie; Madsen, Karsten Kirkegaard; Pajecka, Kamilla

2010-01-01

Astrocyte cultures were prepared from cerebral cortex of new-born and 7-day-old mice and additionally, the cultures from new-born animals were passaged as secondary cultures. The cultures were characterized by immunostaining for the astrocyte markers glutamine synthetase (GS), glial fibrillary ac...... cerebral cortex of 7-day-old mice have metabolic and functional properties indistinguishable from those of classical astrocyte cultures prepared from neocortex of new-born animals. This provides flexibility with regard to preparation and use of these cultures for a variety of purposes....

Preparation, characterization and in vitro dissolution study of Nitrazepam: Cyclodextrin inclusion complex

Directory of Open Access Journals (Sweden)

J S Patel

2012-01-01

Full Text Available The objectives of this research were to prepare and characterize inclusion complexes of Nitrazepam with Hydroxypropyl-β-cyclodextrin (HPβCD and Sulfobutyl ether β-cyclodextrin (SBEβCD to study the effect of complexation on the dissolution rate of Nitrazepam, a water-insoluble drug. The phase solubility profile of Nitrazepam with Hydroxypropyl- β-cyclodextrin and Sulfobutyl ether β-cyclodextrin was an AP-type, indicating the formation of 2:1 stoichiometric inclusion complexes. Gibbs free energy values were all negative, indicating the spontaneous nature Nitrazepam solubilization and their value decreased with increase in the cyclodextrin concentration, demonstrating that the reaction conditions became more favorable as the concentration of cyclodextrins increased. Complexes of Nitrazepam were prepared with cyclodextrin using various methods such as physical mixing, kneading, spray-drying and lyophilization. The complexes were characterized by Differential scanning calorimetry, Fourier-transform infrared, scanning electron microscopy and powder X-ray diffraction studies. These studies indicated that a complex prepared by lyophilization had successful inclusion of the Nitrazepam molecule into the cyclodextrin cavity. Complexation resulted in a marked improvement in the solubility and wettability of Nitrazepam. Among all the samples, a complex prepared with Sulfobutyl ether β-cyclodextrin by lyophilization had the greatest improvement in the in vitro rate of Nitrazepam dissolution. The mean dissolution time for Nitrazepam decreased significantly after preparing complexes. The similarity factor indicated a significant difference between the release profiles of Nitrazepam from complexes, physical mixtures and plain Nitrazepam. To conclude that, the tablets containing complexes prepared with Cyclodextrins had significant improvement in the release profile of Nitrazepam as compared to tablets containing Nitrazepam without cyclodextrin.

Preparation and characterization of rare-earth bulks with controllable nanostructures

International Nuclear Information System (INIS)

Song Xiaoyan; Zhang Jiuxing; Li Erdong; Lu Nianduan; Yin Fuxing

2006-01-01

The preparation and characterization of pure rare-earth-metal bulks with controllable nanostructures are reported in this paper. A novel 'oxygen-free' in situ synthesis technique that combines inert-gas condensation with spark plasma sintering (SPS) technology is proposed. Taking into account the special mechanisms of SPS consolidation and the scale effects of nanoparticles, we introduced practical procedures for preparing rare-earth bulks of amorphous, mixed amorphous and nanocrystals, and nanocrystalline microstructures, respectively. Compared with the conventional polycrystalline bulk, these nanostructured bulks exhibit substantially improved physical and mechanical properties. This technique enables comprehensive studies on the microstructures and properties of a large variety of nanostructured metallic materials that are highly reactive in the air

Preparations and Characterizations of Luminescent Two Dimensional Organic-inorganic Perovskite Semiconductors

Directory of Open Access Journals (Sweden)

Sanjun Zhang

2010-05-01

Full Text Available This article reviews the synthesis, structural and optical characterizations of some novel luminescent two dimensional organic-inorganic perovskite (2DOIP semiconductors. These 2DOIP semiconductors show a self-assembled nano-layered structure, having the electronic structure of multi-quantum wells. 2DOIP thin layers and nanoparticles have been prepared through different methods. The structures of the 2DOIP semiconductors are characterized by atomic force microscopy and X-ray diffraction. The optical properties of theb DOIP semiconductors are characterized from absorption and photoluminescence spectra measured at room and low temperatures. Influences of different components, in particular the organic parts, on the structural and optical properties of the 2DOIP semiconductors are discussed.

Preparation and characterization of hybrid materials based on polypyrrole and silver nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Nguyen Duc Nghia; Ngo Trinh Tung [Institute of Chemistry, Vietnam Academy of Science and Technology, 18 Hoang Quoc Viet Road, Cau Giay District, Hanoi (Viet Nam)], E-mail: ducnghia264@fpt.vn

2009-09-01

Hybrid material is one of the most promising materials classed in the 21st century because of its unique properties and its advanced applications. In this work, hybrid materials based on polypyrrole (Ppy) and silver nanoparicles were prepared and characterized. The preparation of the hybrid material was performed by the chemical polymerization method. The structure, electrical and thermal properties of Ppy/Ag hybrid materials were characterized by XRD, SEM, and TGA and the conventional four probe method. The results showed that the Ag particles of 4-8 nm were agglomerated during the in-situ polymerization of PPy and formed some clusters with the diameter of 25 -150 nm. By the addition of Ag particles, the electrical conductivity of Ppy increased with increasing Ag concentration. The thermal stability of Ppy was significantly improved by modification with Ag particles.

Preparation and characterization of hybrid materials based on polypyrrole and silver nanoparticles

International Nuclear Information System (INIS)

Nguyen Duc Nghia; Ngo Trinh Tung

2009-01-01

Hybrid material is one of the most promising materials classed in the 21st century because of its unique properties and its advanced applications. In this work, hybrid materials based on polypyrrole (Ppy) and silver nanoparicles were prepared and characterized. The preparation of the hybrid material was performed by the chemical polymerization method. The structure, electrical and thermal properties of Ppy/Ag hybrid materials were characterized by XRD, SEM, and TGA and the conventional four probe method. The results showed that the Ag particles of 4-8 nm were agglomerated during the in-situ polymerization of PPy and formed some clusters with the diameter of 25 -150 nm. By the addition of Ag particles, the electrical conductivity of Ppy increased with increasing Ag concentration. The thermal stability of Ppy was significantly improved by modification with Ag particles.

Preparation and characterization of polyindole - iron oxide nanocomposite electrolyte

International Nuclear Information System (INIS)

Rajasudha, G.; Stephen, A.; Narayanan, V.

2009-01-01

Full text: A novel polyindole-iron oxide containing LiClO 4 solid polymer electrolyte has been prepared. The diverse property of magnetic nanoparticle has elicited wide interest from the point of view of technological applications. Their properties are known to be strongly dependent on size, anisotropy and inter particle interactions. The proton conducting materials has received considerable attention as electrolyte materials in technological applications such as fuel cells, sensors and electrochromic display. In this work, polyindole-iron oxide nanocomposite containing LiClO 4 was prepared by in situ polymerization. The indole was polymerized in the presence of iron oxide, using ammonium peroxy disulphate as an oxidizing agent. The polyindole-iron oxide nanocomposite was characterized by XRD, IR, SEM, TGA and TEM. The iron oxide nano particles was incorporated into polyindole and was confirmed by XRD and Fourier transform infrared (FTIR) spectroscopy. The surface Morphology and thermal stability were studied by thermogravimetric analysis (TGA) and SEM respectively. The ionic conductivity of polyindole electrolyte was analyzed from impedance spectrum. The prepared polyindole-iron oxide nanocomposite could be used as solid electrolyte in lithium ion batteries

Preparation and characterization of conjugated polymers made by postpolymerization reactions of alternating polyketones.

Science.gov (United States)

Cheng, Chen; Guironnet, Damien; Barborak, James; Brookhart, Maurice

2011-06-29

Conjugated polymers possessing a poly(2,5-dimethylene-2,5-dihydrofuran) backbone were prepared through postpolymerization reaction of styrenic polyketones with bromine in one-pot reactions. The modification is proposed to proceed via condensation of two repeating units to form a fully characterized polymer with a poly(2,5-dimethylenetetrahydrofuran) backbone. Subsequent bromination and elimination of HBr yield a polymer with a fully conjugated carbon backbone. The new conjugated polymers were characterized by NMR, IR, and UV-vis spectroscopies and by CV. These polymers have strong absorption in the visible region, with the absorption peaks shifted to the NIR region upon doping with acids. The ease of the synthesis of the starting polyketone and of the modifications allows large-scale preparation of those conjugated polymers.

Age-Dependent Metabolic and Immunosuppressive Effects of Tacrolimus.

Science.gov (United States)

Krenzien, F; Quante, M; Heinbokel, T; Seyda, M; Minami, K; Uehara, H; Biefer, H R C; Schuitenmaker, J M; Gabardi, S; Splith, K; Schmelzle, M; Petrides, A K; Azuma, H; Pratschke, J; Li, X C; ElKhal, A; Tullius, S G

2017-05-01

Immunosuppression in elderly recipients has been underappreciated in clinical trials. Here, we assessed age-specific effects of the calcineurin inhibitor tacrolimus (TAC) in a murine transplant model and assessed its clinical relevance on human T cells. Old recipient mice exhibited prolonged skin graft survival compared with young animals after TAC administration. More important, half of the TAC dose was sufficient in old mice to achieve comparable systemic trough levels. TAC administration was able to reduce proinflammatory interferon-γ cytokine production and promote interleukin-10 production in old CD4 + T cells. In addition, TAC administration decreased interleukin-2 secretion in old CD4 + T cells more effectively while inhibiting the proliferation of CD4 + T cells in old mice. Both TAC-treated murine and human CD4 + T cells demonstrated an age-specific suppression of intracellular calcineurin levels and Ca 2+ influx, two critical pathways in T cell activation. Of note, depletion of CD8 + T cells did not alter allograft survival outcome in old TAC-treated mice, suggesting that TAC age-specific effects were mainly CD4 + T cell mediated. Collectively, our study demonstrates age-specific immunosuppressive capacities of TAC that are CD4 + T cell mediated. The suppression of calcineurin levels and Ca 2+ influx in both old murine and human T cells emphasizes the clinical relevance of age-specific effects when using TAC. © 2016 The American Society of Transplantation and the American Society of Transplant Surgeons.

PREPARATION, CHARACTERIZATIONS AND MODIFICATION OF Ni-Pd/NATURAL ZEOLITE CATALYSTS

Directory of Open Access Journals (Sweden)

Wega Trisunaryanti

2010-06-01

Full Text Available Preparation, and modification of Ni-Pd/natural zeolite as well as their characterizations had been carried out. The aim of this research for the fututure is to prepare the best characters catalyst for the conversion of waste plastics fraction to gasoline fraction (C5-C12 hydrocarbons. The preparation of catalysts was performed by reacting a natural zeolite with the precursor of Ni(NO32. 9H2O and PdCl2 in an ammonia solution (25%. The modifications were performed by varying the rasio of Ni/Pd loaded to the zeolite, whereas the Pd was previously loaded and total metal content was 1 wt.% based on the zeolite. The characterization of catalysts included determination of acidity gravimetrically by adsorption of ammonia or pyridine vapour  base method, metal content by Atomic Adsorption Spectrophotometer (AAS and X-ray Fluoresence (XRF and crystallinity by X-ray Diffraction (XRD. The treatment of catalysts using Etilene Diamine Tetra Acetic acid  (EDTA was performed to study the metal distribution on the outer or inner surface of the zeolite. The characterization results showed that the loading of metals to the zeolite increased its acidity and decreased its spesific surface area, however, did not defect its crystallnity.  The metals loaded on the zeolite were distributed inside the pore and at outer surface of the zeolite. For all catalyst samples, the acidities determined using ammonia were higher than those of pyridine, and the acidities determined before the EDTA treatment was lower than those after the treatment.  Metal contents of the zeolite before the EDTA treatment were higher than those after the treatment. The EDTA treatment enhanced the crystallinity of the sampel. The relationship between the metal rasio towards the acidity of the catalyst samples were in variation. Catalyst samples produced in this research have good characters, thus promisingly can be used for conversion process of waste plastics to gasoline fraction.    Keywords

Preparation and characterization of nanodiamond cores coated with a thin Ni-Zn-P alloy film

International Nuclear Information System (INIS)

Wang Rui; Ye Weichun; Ma Chuanli; Wang Chunming

2008-01-01

Nanodiamond cores coated with a thin Ni-Zn-P alloy film were prepared by an electroless deposition method under the conditions of tin chloride sensitization and palladium chloride activation. The prepared materials were analyzed by Fourier transform infrared (FTIR) spectrometry and X-ray diffraction (XRD). The nanostructure of the materials was then characterized by transmission electron microscopy (TEM). The alloy film composition was characterized by Energy Dispersive X-ray (EDX) analysis. The results indicated the approximate composition 49.84%Ni-37.29%Zn-12.88%P was obtained

Polymeric nanoparticles: A study on the preparation variables and characterization methods.

Science.gov (United States)

Crucho, Carina I C; Barros, Maria Teresa

2017-11-01

Since the emergence of Nanotechnology in the past decades, the development and design of nanomaterials has become an important field of research. An emerging component in this field is nanomedicine, wherein nanoscale materials are being developed for use as imaging agents or for drug delivery applications. Much work is currently focused in the preparation of well-defined nanomaterials in terms of size and shape. These factors play a significantly role in the nanomaterial behavior in vivo. In this context, this review focuses on the toolbox of available methods for the preparation of polymeric nanoparticles. We highlight some recent examples from the literature that demonstrate the influence of the preparation method on the physicochemical characteristics of the nanoparticles. Additionally, in the second part, the characterization methods for this type of nanoparticles are discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Preparation and characterization of bio-composite PEEK/nHA

Science.gov (United States)

Jin, Y. S.; Bian, C. C.; Zhang, Z. Q.; Zhao, Y.; Yang, L.

2017-01-01

PEEK/nHA composite material, with excellent mechanical property as polyetheretherketone (PEEK) and biological activity as hydroxyapatite (HA), has attracted wide attention of medical experts and materials science experts. The addition of hydroxyapatite was the decisive factor for biological activity in PEEK/nHA composite. In this paper, acicular nanohydroxyapatite was prepared by chemical precipitation method with Ca(NO3)2, (NH4)2HPO4 as raw material; PEEK/nHA composite was prepared by solution blending and vacuum sintering method. The composite was characterized with FT-IR, XRD, DSC, TG and mechanical property test. Results showed that the composite has good thermal stability and compressive property when the mass ratio of PEEK to nHA is 10:3; and high nHA content can improve the biological activity of the composite, which can meet the basic requirements for bone tissue engineering scaffold.

Preparation, Physicochemical Characterization and Performance Evaluation of Gold Nanoparticles in Radiotherapy

Directory of Open Access Journals (Sweden)

Ali Kamiar

2013-08-01

Full Text Available Purpose: The aim of the present study was preparation, physicochemical characterization and performance evaluation of gold nanoparticles (GNPs in radiotherapy. Another objective was the investigation of anti-bacterial efficacy of gold nanoparticle against E. coli clinical strains. Methods: Gold nanoparticles prepared by controlled reduction of an aqueous HAuCl4 solution using Tri sodium citrate. Particle size analysis and Transmission electron microscopy were used for physicochemical characterization. Polymer gel dosimetry was used for evaluation of the enhancement of absorbed dose. Diffusion method in agar media was used for investigation of anti-bacterial effect. Results: Gold nanoparticles synthesized in size range from 57 nm to 346 nm by planning different formulation. Gold nanoparticle in 57 nm size increased radiation dose effectiveness with the magnitude of about 21 %. At the concentration of 400 ppm, Nano gold exhibited significant anti-bacterial effect against E. coli clinical strains. Conclusion: It is concluded that gold nanoparticles can be applied as dose enhancer in radiotherapy. The Investigation of anti-bacterial efficacy showed that gold nanoparticle had significant effect against E. coli clinical strains.

Gravimetric preparation and characterization of primary reference solutions of molybdenum and rhodium.

Science.gov (United States)

Kaltenbach, Angela; Noordmann, Janine; Görlitz, Volker; Pape, Carola; Richter, Silke; Kipphardt, Heinrich; Kopp, Gernot; Jährling, Reinhard; Rienitz, Olaf; Güttler, Bernd

2015-04-01

Gravimetrically prepared mono-elemental reference solutions having a well-known mass fraction of approximately 1 g/kg (or a mass concentration of 1 g/L) define the very basis of virtually all measurements in inorganic analysis. Serving as the starting materials of all standard/calibration solutions, they link virtually all measurements of inorganic analytes (regardless of the method applied) to the purity of the solid materials (high-purity metals or salts) they were prepared from. In case these solid materials are characterized comprehensively with respect to their purity, this link also establishes direct metrological traceability to The International System of Units (SI). This, in turn, ensures the comparability of all results on the highest level achievable. Several national metrology institutes (NMIs) and designated institutes (DIs) have been working for nearly two decades in close cooperation with commercial producers on making an increasing number of traceable reference solutions available. Besides the comprehensive characterization of the solid starting materials, dissolving them both loss-free and completely under strict gravimetric control is a challenging problem in the case of several elements like molybdenum and rhodium. Within the framework of the European Metrology Research Programme (EMRP), in the Joint Research Project (JRP) called SIB09 Primary standards for challenging elements, reference solutions of molybdenum and rhodium were prepared directly from the respective metals with a relative expanded uncertainty associated with the mass fraction of U rel(w) methods required to assist with the preparation and as dissemination tools.

Preparation and characterization of metallic supported thin Pd-Ag membranes for hydrogen separation

OpenAIRE

Fernandez, Ekain; Medrano, Jose Antonio; Melendez, Jon; Parco, Maria; Viviente, J.L.; van Sint Annaland, Martin; Gallucci, Fausto; Pacheco Tanaka, David A.

2015-01-01

This paper reports the preparation and characterization of thin-film (4-5 µm thick) Pd-Ag metallic supported membranes for high temperature applications. Various thin film membranes have been prepared by depositing a ceramic interdiffusion barrier layer prior to the simultaneous Pd-Ag electroless plating deposition. Two deposition techniques for ceramic layers (made of zirconia and alumina) have been evaluated: atmospheric plasma spraying and dip coating of a powder suspension. Initially, the...

Preparation and characterization of functionalized cellulose nano crystals with methyl adipoyl chloride used to prepare chitosan grafting nano composite

International Nuclear Information System (INIS)

Mesquita, Joao Paulo de; Teixeira, Ivo F.; Donnici, Claudio L.; Pereira, Fabiano V.

2011-01-01

Cellulose nano crystals (CNCs) were prepared from eucalyptus pulp and functionalized with methyl adipoyl chloride. The nano materials were characterized by different techniques including FTIR, 1H NMR and XRD which showed that the functionalization occurs only on the surface of the nano structures without change in crystalline structure of the nanoparticles. The new-functionalized CNCs were used as reinforcement in the preparation of a nano composite with chitosan, through the formation of a covalent bond between the nano filler and matrix. Preliminary results of mechanical tests indicate an improvement in tensile strength and increase in deformation of chitosan. (author)

On the preparation of as-produced and purified single-walled carbon nanotube samples for standardized X-ray diffraction characterization

International Nuclear Information System (INIS)

Allaf, Rula M.; Rivero, Iris V.; Spearman, Shayla S.; Hope-Weeks, Louisa J.

2011-01-01

The aim of this research was to specify proper sample conditioning for acquiring representative X-ray diffraction (XRD) profiles for single-walled carbon nanotube (SWCNT) samples. In doing so, a specimen preparation method for quantitative XRD characterization of as-produced and purified arc-discharge SWCNT samples has been identified. Series of powder XRD profiles were collected at different temperatures, states, and points of time to establish appropriate conditions for acquiring XRD profiles without inducing much change to the specimen. It was concluded that heating in the 300-450 deg. C range for 20 minutes, preferably vacuum-assisted, and then sealing the sample is an appropriate XRD specimen preparation technique for purified arc-discharge SWCNT samples, while raw samples do not require preconditioning for characterization. - Graphical Abstract: A sample preparation method for XRD characterization of as-produced and purified arc-discharge SWCNT samples is identified. The preparation technique seeks to acquire representative XRD profiles without inducing changes to the samples. Purified samples required 20 minutes of heating at (300-450)deg. C, while raw samples did not require preconditioning for characterization. Highlights: → Purification routines may induce adsorption onto the SWCNT samples. → Heating a SWCNT sample may result in material loss, desorption, and SWCNTs closing. → Raw arc-discharge samples do not require preparation for XRD characterization. → Heating is appropriate specimen preparation for purified and heat-treated samples. → XRD data fitting is required for structural analysis of SWCNT bundles.

High Intrapatient Variability of Tacrolimus Exposure in the Early Period After Liver Transplantation Is Associated With Poorer Outcomes.

Science.gov (United States)

Rayar, Michel; Tron, Camille; Jézéquel, Caroline; Beaurepaire, Jean Marie; Petitcollin, Antoine; Houssel-Debry, Pauline; Camus, Christophe; Verdier, Marie Clémence; Dehlawi, Ammar; Lakéhal, Mohamed; Desfourneaux, Véronique; Meunier, Bernard; Sulpice, Laurent; Bellissant, Eric; Boudjema, Karim; Lemaitre, Florian

2018-03-01

Tacrolimus (TAC) is the cornerstone of immunosuppressive regimen in liver transplantation (LT). Its pharmacokinetics is characterized by a high interpatient and intrapatient variability (IPV) leading to an unpredictable dose-response relationship. The aim of our study was to evaluate the impact of TAC IPV (IPV) on graft and patient outcomes after LT. We retrospectively analyzed 812 LT recipients treated with TAC. The IPV of TAC concentrations was estimated by calculating the coefficient of variation (CV) of whole blood trough concentrations. Patients were categorized in 2 groups: low IPV (CV < 40%) and high IPV (CV ≥ 40%). There were significantly more neurologic complications (31.2% vs 16.6%, P < 0.001), cardiovascular complications (19.7% vs 9.7%, P < 0.001), and acute renal failure requiring dialysis (8.5% vs 2.2%, P < 0.001) in the high CV group than in the low CV group. Moreover, graft survival was significantly poorer in the high CV group (hazard ratio, 1.42; 95% confidence interval, 1.04-1.95; P = 0.03). A pretransplantation elevated Model for End-Stage Liver Disease score (P < 0.001) and Child-Pugh grade (P < 0.001) were identified as risk factors for presenting a high CV. A high CV of TAC concentrations was found to be predictive of TAC-related toxicity and poorer survival.

Preparation, characterization and mechanical properties of rare-earth-based nanocomposites

Directory of Open Access Journals (Sweden)

Musbah S.S.

2012-01-01

Full Text Available This study reports research related to different preparation methods and characterization of polymer nanocomposites for optical applications. The Eu-ion doped Gd2O3 nanophosphor powder with different nanoparticle content was embedded in the matrix of PMMA. Preparation was carried out by mixing molding (bulk, electrospinning (nanofibers and solution casting (thin films with neat particles and particles coated with AMEO silane. Among the pros and cons for proposed methods, the mixing molding enables to avoid solvent use while the best deagglomeration and nanoparticle distribution is gained using the electrospinning method. The results of dynamic mechanical analysis (DMA and nanoindentation revealed that the storage modulus of the composites was higher than that of pure PMMA and increased with nanophosphor content. Surface modification of particles improved the mechanical properties of nanocomposites.

Preparation and characterization of boro-tellurite glasses

Science.gov (United States)

Kaur, Nirmal; Khanna, Atul; Krishna, P. S. R.

2014-04-01

Glass samples of the system: xB2O3-(100-x) TeO2; x= 15, 20, 25 and 30 mol% were prepared by melt quenching and characterized by X-ray diffraction, density measurements, Differential Scanning Calorimetry and FTIR spectroscopy. XRD confirmed the amorphous structure of all samples. Density of glasses decreased with increase in B2O3 concentration due to the replacement of heavier TeO2 with lighter B2O3 whereas the glass transition temperature increased from 339°C to 366°C; the later effect was due to increase in the concentration of stronger B-O bonds in the glass network. FTIR studies found that BO4 units convert into BO3 with the addition of B2O3.

Metal oxide nanostructures: preparation, characterization and functional applications as chemical sensors.

Science.gov (United States)

Zappa, Dario; Bertuna, Angela; Comini, Elisabetta; Kaur, Navpreet; Poli, Nicola; Sberveglieri, Veronica; Sberveglieri, Giorgio

2017-01-01

Preparation and characterization of different metal oxide (NiO, WO 3 , ZnO, SnO 2 and Nb 2 O 5 ) nanostructures for chemical sensing are presented. p-Type (NiO) and n-type (WO 3 , SnO 2 , ZnO and Nb 2 O 5 ) metal oxide nanostructures were grown on alumina substrates using evaporation-condensation, thermal oxidation and hydrothermal techniques. Surface morphologies and crystal structures were investigated through scanning electron microscopy and Raman spectroscopy. Furthermore, different batches of sensors have been prepared, and their sensing performances towards carbon monoxide and nitrogen dioxide have been explored. Moreover, metal oxide nanowires have been integrated into an electronic nose and successfully applied to discriminate between drinking and contaminated water.

Preparation and characterization of nanocomposites of the carboxymethyl cellulose reinforced with cellulose nanocrystals

International Nuclear Information System (INIS)

Flauzino Neto, Wilson P.; Silverio, Hudson A.; Vieira, Julia G.; Silva, Heden C.; Rosa, Joyce R.; Pasquini, Daniel; Assuncao, Rosana M.N.

2011-01-01

Nanocrystals of cellulose (NCC) isolated from Eucalyptus urograndis Kraft pulp were used to prepare nanocomposites employing carboxymethyl cellulose (CMC) as matrix. The nanocrystals were isolated by hydrolysis with H 2 SO 4 64% solution, for 20 minutes at 45 deg C. The nanocrystals were characterized by X-ray diffraction to evaluate the crystallinity of them. The amount of NCC used in the preparation of nanocomposites varied from 0 to 15%. The nanocomposites were characterized by thermal and mechanical analysis. A large reinforcing effect of NCC on the CMC matrix was observed. With the incorporation of the NCC, the tensile strength of nanocomposites was significantly improved by 107%, the elongation at break decreased by 48% and heat resistance to decomposition increased subtle. The improvement in thermo-mechanical properties are attributed to strong interactions between nanoparticles and CMC matrix. (author)

Preparation and Characterization of Membranes Formed by Nonsolvent Induced Phase Separation: A Review

KAUST Repository

Guillen, Gregory R.; Pan, Yinjin; Li, Minghua; Hoek, Eric M. V.

2011-01-01

. The body of knowledge has grown exponentially in the past fifty years, which suggests the need for a critical review of the literature. Here we present a review of nonsolvent induced phase separation membrane preparation and characterization for many

Preparation and characterization of biodegradable magnetic carriers by single emulsion-solvent evaporation

Energy Technology Data Exchange (ETDEWEB)

Liu Xianqiao [Departments of Neurology and Surgery (Neurosurgery), University of Chicago Pritzker School of Medicine, Chicago, IL (United States); Kaminski, Michael D. [Chemical Engineering Division, Argonne National Laboratory, Argonne, IL (United States); Riffle, Judy S. [Department of Chemistry, Virginia Tech, Blacksburg, VA (United States); Chen Haitao [Departments of Neurology and Surgery (Neurosurgery), University of Chicago Pritzker School of Medicine, Chicago, IL (United States); Torno, Michael [Departments of Neurology and Surgery (Neurosurgery), University of Chicago Pritzker School of Medicine, Chicago, IL (United States); Finck, Martha R. [Chemical Engineering Division, Argonne National Laboratory, Argonne, IL (United States); Taylor, LaToyia [Departments of Neurology and Surgery (Neurosurgery), University of Chicago Pritzker School of Medicine, Chicago, IL (United States); Rosengart, Axel J. [Departments of Neurology and Surgery (Neurosurgery), University of Chicago Pritzker School of Medicine, Chicago, IL (United States)]. E-mail: arosenga@uchicago.edu

2007-04-15

This paper describes a single emulsion-solvent evaporation protocol to prepare PEGylated biodegradable/biocompatible magnetic carriers by utilizing hydrophobic magnetite and a mixture of poly(D,L lactide-co-glycolide) (PLGA) and poly(lactic acid-block-polyethylene glycol) (PLA-PEG) (26:1 by mass) polymers. We characterized the magnetic microspheres in terms of morphology, composite microstructure, size and size distribution, and magnetic properties. Results show that the preparation produces magnetic microspheres with a good spherical morphology, small size (mean diameter of 1.2-1.5 {mu}m) by means of large size distributions, and magnetizations up to 20-30 emu/g of microspheres.

Preparation and characterization of biodegradable magnetic carriers by single emulsion-solvent evaporation

International Nuclear Information System (INIS)

Liu Xianqiao; Kaminski, Michael D.; Riffle, Judy S.; Chen Haitao; Torno, Michael; Finck, Martha R.; Taylor, LaToyia; Rosengart, Axel J.

2007-01-01

This paper describes a single emulsion-solvent evaporation protocol to prepare PEGylated biodegradable/biocompatible magnetic carriers by utilizing hydrophobic magnetite and a mixture of poly(D,L lactide-co-glycolide) (PLGA) and poly(lactic acid-block-polyethylene glycol) (PLA-PEG) (26:1 by mass) polymers. We characterized the magnetic microspheres in terms of morphology, composite microstructure, size and size distribution, and magnetic properties. Results show that the preparation produces magnetic microspheres with a good spherical morphology, small size (mean diameter of 1.2-1.5 μm) by means of large size distributions, and magnetizations up to 20-30 emu/g of microspheres

Preparation and characterization of PEGylated chitosan nanocapsules as a carrier for pharmaceutical application

Science.gov (United States)

Najafabadi, Alireza Hassani; Abdouss, Majid; Faghihi, Shahab

2014-03-01

A new method to conjugate methoxy polyethylene glycol (mPEG) to C6 position of chitosan under the mild condition is introduced that improves the biocompatibility and water solubility of chitosan. Harsh deprotecting step and several purification cycles are two major disadvantages of the current methods for preparing PEGylated chitosan. In this study, the amine groups at C2 position of chitosan are protected using SDS followed by grafting the PEG. The protecting group of chitosan is simply removed by dialyzing against Tris solution. The chemical structure of the prepared polymer is characterized by FTIR and 1H NMR spectroscopy. Fourier transformed-infrared (FT-IR) and 1H NMR spectra confirmed that the mPEG is successfully grafted to C6 position of chitosan. Prepared methoxy polyethylene glycol (mPEG) is then employed to prepare the nanocapsules for the encapsulation of poor water-soluble drug, propofol. The TEM, AFM, and DLS techniques are used to characterize the prepared nanocapsules size and morphology. The results show a size of about 80 nm with spherical shape for nanocapsules. In vitro drug release is carried out to evaluate the potential of nanocarriers for the intravenous delivery of drugs. The profile of release from formulated nanocapsules is similar to those of commercial lipid emulsion (CLE). In vivo animal sleep-recovery test on rats shows a close similarity between the time of unconsciousness and recovery of righting reflex between nanoparticles and CLE. This study provides an efficient, novel, and easy method for preparing a carrier system that requires less intensive reaction conditions, fewer reaction steps, and less purification steps. In addition, the nanocapsules introduced here could be a promising nano carrier for the delivery of poor water-soluble drugs.

Preparation and characterization of sepiolite-based phase change material nanocomposites for thermal energy storage

International Nuclear Information System (INIS)

Konuklu, Yeliz; Ersoy, Orkun

2016-01-01

Highlights: • Sepiolite-based phase change material nanocomposites were prepared. • An easy direct impregnation process was used. • This paper is one of the first study about sepiolite-based phase change material nanocomposites. • Influence of PCM type on thermal properties of nanocomposites was reported. - Abstract: This paper is one of the first study about the preparation and characterization of sepiolite-based phase change material nanocomposites for thermal energy storage applications. Sepiolite is an important natural fibrous raw material. Nanoscale fibrous tubular structure of sepiolite becomes important in nanocomposite preparation. In this study, sepiolite/paraffin and sepiolite/decanoic acid nanocomposites were manufactured by the direct impregnation method. By the preparation of nanocomposites, PCM move in tubular channels of sepiolite, phase changing occurs in these tubes and surface area increases like as in microencapsulation. The structure and properties of nanocomposites PCMs (CPCM) have been characterized via scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR). The SEM results prove the successful preparation of phase change material/sepiolite nanocomposites and point out that the fibers of sepiolite is modified with phase change materials in the nanocomposite. The phase change enthalpies of melting and freezing were about 62.08 J/g and −62.05 J/g for sepiolite/paraffin nanocomposites and 35.69 J/g and −34.55 J/g for sepiolite/decanoic acid nanocomposites, respectively. The results show that PCM/sepiolite nanocomposites were prepared successfully and their properties are very suitable for thermal energy storage applications.

Preparation and characterization of CuO nanowire arrays

International Nuclear Information System (INIS)

Yu Dongliang; Ge Chuannan; Du Youwei

2009-01-01

CuO nanowire arrays were prepared by oxidation of copper nanowires embedded in anodic aluminum oxide (AAO) membranes. The AAO was fabricated in an oxalic acid at a constant voltage. Copper nanowires were formed in the nanopores of the AAO membranes in an electrochemical deposition process. The oxidized copper nanowires at different temperatures were studied. X-ray diffraction patterns confirmed the formation of a CuO phase after calcining at 500 0 C in air for 30 h. A transmission electron microscopy was used to characterize the nanowire morphologies. Raman spectra were performed to study the CuO nanowire arrays. After measuring, we found that the current-voltage curve of the CuO nanowires is nonlinear.

Preparation and characterization of boro-tellurite glasses

Energy Technology Data Exchange (ETDEWEB)

Kaur, Nirmal, E-mail: akphysics@yahoo.com; Khanna, Atul, E-mail: akphysics@yahoo.com [Glass Physics and Sensors Laboratory, Department of Physics, Guru Nanak Dev University, Amritsar-143005, Punjab (India); Krishna, P. S. R. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085, Maharashtra (India)

2014-04-24

Glass samples of the system: xB{sub 2}O{sub 3}−(100−x) TeO{sub 2}; x= 15, 20, 25 and 30 mol% were prepared by melt quenching and characterized by X-ray diffraction, density measurements, Differential Scanning Calorimetry and FTIR spectroscopy. XRD confirmed the amorphous structure of all samples. Density of glasses decreased with increase in B{sub 2}O{sub 3} concentration due to the replacement of heavier TeO{sub 2} with lighter B{sub 2}O{sub 3} whereas the glass transition temperature increased from 339°C to 366°C; the later effect was due to increase in the concentration of stronger B-O bonds in the glass network. FTIR studies found that BO{sub 4} units convert into BO{sub 3} with the addition of B{sub 2}O{sub 3}.

Nanocomposite Coatings: Preparation, Characterization, Properties, and Applications

Directory of Open Access Journals (Sweden)

Phuong Nguyen-Tri

2018-01-01

Full Text Available Incorporation of nanofillers into the organic coatings might enhance their barrier performance, by decreasing the porosity and zigzagging the diffusion path for deleterious species. Thus, the coatings containing nanofillers are expected to have significant barrier properties for corrosion protection and reduce the trend for the coating to blister or delaminate. On the other hand, high hardness could be obtained for metallic coatings by producing the hard nanocrystalline phases within a metallic matrix. This article presents a review on recent development of nanocomposite coatings, providing an overview of nanocomposite coatings in various aspects dealing with the classification, preparative method, the nanocomposite coating properties, and characterization methods. It covers potential applications in areas such as the anticorrosion, antiwear, superhydrophobic area, self-cleaning, antifouling/antibacterial area, and electronics. Finally, conclusion and future trends will be also reported.

Preparation and characterization of hybrid materials from natural chrysotile

International Nuclear Information System (INIS)

Giraldelli, M.G.; Silva, M.L.C.P.

2010-01-01

Special attention has been given to the development of new materials from natural chrysotile. This fiber has about 40% silicon oxide in its structure with an outer layer of brucite (MgOH 2 ). With the aim of obtaining a material with a more uniform structure, acid leaching was performed to remove the outer layer of brucite, resulting in a silicon oxide hydrate. This material was used as support for the deposition of Nb 2 O 5 .nH 2 O. The Nb 2 O 5 .nH 2 O was prepared by conventional precipitation using as starting material niobium metallic. In this study, we performed the synthesis and characterization of the material SiO 2 .nH 2 O / Nb 2 O 5 .nH 2 O 1:1. Both chrysotile as niobium are widely available national resources, which confirms the economic viability of resource use. The materials studied were characterized by XRD, SEM and TG/DTG. (author)

Preparation and characterization of nano gold supported over montmorillonite clays

International Nuclear Information System (INIS)

Suraja, P.V.; Binitha, N.N.; Yaakob, Z.; Silija, P.P.

2009-01-01

Full text: The use of montmorillonite clays as a matrix, or as a host, for obtaining intercalated/supported metal particles has potential applications in catalysis and other areas. The gold nanoparticles were obtained from the most common anionic gold precursor HAuCl 4 ·3H 2 O by deposition-precipitation (DP) methods. However, it is difficult to prepare nano scale gold catalysts supported on silica surfaces with lower isoelectric point (IEP). Homogeneous precipitation method using urea also fails on silica surfaces. Reasons for the inefficiency of these methods are the negative charge of the metal precursor as well as the support surface and the high pH required for depositing gold nanoparticles. In the present work, we use glucose as the reductant in the presence of stabilizer for preparation of nano gold supported on montmorillonite clay. Here there is no need of increasing the pH of the solution to reduce the Au 3+ ions. The prepared systems are characterized using various techniques such as using X-ray fluorescence (XRF), UV-Vis Diffuse reflectance spectra (DRS) and Fourier Transform infra red spectra (FTIR) to prove the efficiency of the present method. (author)

Preparation and Characterization of Nano Gold Supported over Montmorillonite Clays

Energy Technology Data Exchange (ETDEWEB)

Suraja, P V; Binitha, N N; Yaakob, Z; Silija, P P, E-mail: binithann@yahoo.co.in [Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, National University of Malaysia, 43600 UKM Bangi, Selangor (Malaysia)

2011-02-15

The use of montmorillonite clays as a matrix, or as a host, for obtaining intercalated/supported metal particles has potential applications in catalysis and other areas. The gold nanoparticles were obtained from the most common anionic gold precursor HAuCl4{center_dot}3H2O by deposition-precipitation (DP) methods. However, it is difficult to prepare nanoscale gold catalysts supported on silica surfaces with lower isoelectric point (IEP). Homogeneous precipitation method using urea also fails on silica surfaces. Reasons for the inefficiency of these methods are the negative charge of the metal precursor as well as the support surface and the high pH required for depositing gold nanoparticles. In the present work, we use glucose as the reductant in the presence of stabilizer for preparation of nano gold supported on montmorillonite clay. There is no need of increasing the pH of the solution to reduce the Au3+ ions. The prepared systems are characterized using various techniques such as using X-ray fluorescence (XRF), UV-VIS Diffuse reflectance spectra (DRS) and Fourier Transform infra red spectra (FTIR) to prove the efficiency of the present method.

Improved characterization of EV preparations based on protein to lipid ratio and lipid properties.

Directory of Open Access Journals (Sweden)

Xabier Osteikoetxea

Full Text Available In recent years the study of extracellular vesicles has gathered much scientific and clinical interest. As the field is expanding, it is becoming clear that better methods for characterization and quantification of extracellular vesicles as well as better standards to compare studies are warranted. The goal of the present work was to find improved parameters to characterize extracellular vesicle preparations. Here we introduce a simple 96 well plate-based total lipid assay for determination of lipid content and protein to lipid ratios of extracellular vesicle preparations from various myeloid and lymphoid cell lines as well as blood plasma. These preparations included apoptotic bodies, microvesicles/microparticles, and exosomes isolated by size-based fractionation. We also investigated lipid bilayer order of extracellular vesicle subpopulations using Di-4-ANEPPDHQ lipid probe, and lipid composition using affinity reagents to clustered cholesterol (monoclonal anti-cholesterol antibody and ganglioside GM1 (cholera toxin subunit B. We have consistently found different protein to lipid ratios characteristic for the investigated extracellular vesicle subpopulations which were substantially altered in the case of vesicular damage or protein contamination. Spectral ratiometric imaging and flow cytometric analysis also revealed marked differences between the various vesicle populations in their lipid order and their clustered membrane cholesterol and GM1 content. Our study introduces for the first time a simple and readily available lipid assay to complement the widely used protein assays in order to better characterize extracellular vesicle preparations. Besides differentiating extracellular vesicle subpopulations, the novel parameters introduced in this work (protein to lipid ratio, lipid bilayer order, and lipid composition, may prove useful for quality control of extracellular vesicle related basic and clinical studies.

Preparation and characterization of polyurethane microcapsules containing functional oil

Energy Technology Data Exchange (ETDEWEB)

Kim, I.H.; Seo, J.B.; Kim, Y.J. [Sungkyunkwan University, Suwon (Korea)

2002-05-01

Polyurethane microcapsules containing functional oil (citronella oil) were successfully prepared by conventional interfacial polymerization of tolulene 2,4-diisocyanate (TDI) and ethylene glycol (EG) and characterized by Fourier transform (FT-IR) spectroscopy, Ultraviolet spectroscopy, particle size analysis, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The effects of polymerization variables such as surfactant concentration and agitation speed, on the particle size and particle size distribution were investigated. FT-IR spectroscopic data showed that citronella oil was successfully encapsulated in the microcapsule. Thermogravimetric analysis data showed that the microcapsule was thermally stable up to 220 deg. C. The controlled release of the citronella oil present in the microcapsule core in a methanol medium was demonstrated by ultraviolet spectroscopy, showing that the amount of released citronella oil was increased with increasing time. It was observed that the amount of released citronella oil was increased with increasing stirring speed and emulsifier concentration in the microcapsule preparation step. Polyurethane microcapsules containing citronella oil showed excellent anti-moth property. (author). 28 refs., 1 tab., 12 figs.

Preparation and characterization of the Li(17)Pb(83) eutectic alloy and the LiPb intermetallic compound

International Nuclear Information System (INIS)

Jauch, U.; Karcher, V.; Schulz, B.

1986-01-01

Li(17)Pb(83) and LiPb were prepared from the pure elements in amounts of several hundred grams. The resolidified samples were characterized by melting points (eutectic temperature), chemical analysis and metallography. Using differential thermal analysis the heats of fusion were determined and the behaviour of the intermetallic phase LiPb in vacuum and high purified He was studied. The results from these investigations were applied to characterize Li(17)Pb(83) prepared in high amounts for technical application as a potential liquid breeder material. (orig.)

Study and development of nanocomposites PBT/bentonite clay treated by ionizing radiation: preparation and characterization

International Nuclear Information System (INIS)

Sartori, Mariana do Nascimento

2014-01-01

This work describes the preparation and characterization of composites based on poly (butylene terephthalate) - PBT and brazilian modified clay prepared by the melt intercalation. PBT nanocomposites with 3 and 5 % by weight of organically modified clay, by the addition of a quaternary ammonium salt, were prepared by extrusion using a twin-screw extruder machine. After the extrusion process, the materials were injected to obtain specimens tests samples for the characterization tests. Part of the specimens samples were irradiated using an electron beam accelerator with 1.5 MeV at room temperature in the presence of air. Samples of pure PBT and irradiated and non-irradiated nanocomposites were characterized by mechanical tests of tensile, flexural and impact, heat distortion temperature (HDT), X - ray diffraction (XRD), scanning electron microscopy (SEM), melt flow index (MFI) thermogravimetry (TG) and differential scanning calorimetry (DSC) and the correlation between the properties was discussed. The results showed that the addition of clay, in both percentages, promoted an increase greater than 50 % in tensile strength at break and a gain of around 35% in heat distortion temperature when compared to the pure polymer. The treatment with ionizing radiation of electron beam at the doses used in this study showed no significant changes in material properties. (author)

Preparation and Characterization of Tin Oxide Nanowires

Directory of Open Access Journals (Sweden)

A. Kabiri

2013-12-01

Full Text Available The aim of this research is preparation of SnO2 nanowires by means of Thermal chemical reaction vapor transport deposition (TCRVTD method from SnO powders. The morphology, chemical composition and microstructure properties of the nanowires are characterized using field emission scanning electron microscope (FE-SEM, EDS, and XRD. The XRD diffraction patterns reveal that the SnO2 nanowires have been grown in the form of tetragonal crystal structures with the lattice parameter of a=b=0.440 nm, and c=0.370 nm. The SEM images reveal that SnO2 nanowires have successfully been grown on the Si substrate. The EDS patterns show that only elements of Sn, O and Au are detected. Prior to the VLS process the substrate is coated by a thin layer of Au. The diameter of nanowires is measured to be something between 20-100 nm.

PREPARATION AND CHARACTERIZATION OF SOY PROTEIN ISOLATE(SPI)/MONTMORILLONITE(MMT) BIONANOCOMPOSITES

Institute of Scientific and Technical Information of China (English)

傅强

2009-01-01

The bionanocomposites of soy protein isolate(SPI)/montmorillonite(MMT) have been prepared successfully via simple melt mixing,in which MMT was used as nanofiller and glycerol was used as plasticizer.Their structures and properties were characterized with X-ray diffraction(XRD),differential scanning calorimetry(DSC),scanning electron microscopy(SEM),thermogravimetric analysis and tensile testing.XRD、TEM and SEM results indicated that the MMT layers could be easily intercalated by the SPI matrix even by si...

Preparation and characterization of Ce-doped HfO2 nanoparticles

International Nuclear Information System (INIS)

Gálvez-Barboza, S.; González, L.A.; Puente-Urbina, B.A.; Saucedo-Salazar, E.M.; García-Cerda, L.A.

2015-01-01

Highlights: • Ce-doped HfO 2 nanoparticles were prepared by a modified solgel method. • Ce-doped HfO 2 nanoparticles have a semispherical shape with sizes between 6 and 11.5 nm. • The samples doped with 10% in weight of Ce directly crystallized in a cubic structure. • A quick, straightforward and effective route for the preparation of Ce-doped nanoparticles. - Abstract: A modified solgel method to synthesize Ce-doped HfO 2 nanoparticles was carried out using a precursor material prepared with cerium nitrate, hafnium chloride, citric acid and ethylene glycol. The obtained precursor material was calcined at 500 and 700 °C for 2 h in air. The influence of the concentration of Ce and the calcination temperature was studied to observe the structural and morphological changes of the obtained materials. For the characterization, X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman scattering (RS) were employed. The XRD patterns shown that the Ce-doped HfO 2 undergoes a structural transformation from monoclinic to cubic phase, which is significantly dependent on the Ce content and calcination temperature. TEM images have also confirmed the existence of semispherical nanoparticles with sizes between 6 and 11.5 nm

Preparation and Characterization of Bragg Fibers for Delivery of Laser Radiation at 1064 nm

Directory of Open Access Journals (Sweden)

V. Matejec

2013-04-01

Full Text Available Bragg fibers offer new performance for transmission of high laser energies over long distances. In this paper theoretical modeling, preparation and characterization of Bragg fibers for delivery laser radiation at 1064 nm are presented. Investigated Bragg fibers consist of the fiber core with a refractive index equal to that of silica which is surrounded by three pairs of circular layers. Each pair is composed of one layer with a high and one layer with a low refractive index and characterized by a refractive-index difference around 0.03. Propagation constants and radiation losses of the fundamental mode in such a structure were calculated on the basis of waveguide optics. Preforms of the Bragg fibers were prepared by the MCVD method using germanium dioxide, phosphorous pentoxide and fluorine as silica dopants. The fibers with a diameter of 170 m were drawn from the preforms. Refractive-index profiles, angular distributions of the output power and optical losses of the prepared fibers were measured. Results of testing the fibers for delivery radiation of a pulse Nd:YAG laser at 1064 nm are also shown.

Preparation and characterization of 238Pu-ceramics for radiation damage experiments

International Nuclear Information System (INIS)

DM Strachan; RD Scheele; WC Buchmiller; JD Vienna; RL Sell; RJ Elovich

2000-01-01

characterize and test these specimens every 6 months by (1) monitoring the dimensions, (2) monitoring the geometric and pycnometric densities, (3) monitoring the appearance, (4) determining the normalized amount leached during a 3-day, static, 90 C leach test in high purity water, and (5) monitoring the crystal structure with x-ray diffraction crystallography (XRD). In this paper, the authors document the preparation and initial characterization of the materials that were made in this study. The initial XRD characterizations indicate that the phase assemblages appear to be correct with the exception of the 238 Pu-zirconolite baseline material. They made this latter material using too much Pu, so this material contains unreacted PuO 2 . The characterization of the physical properties of these materials found that the densities for all but three materials appear to be > 94% of theoretical, and only a few of the specimens have significant cracking. Those with cracking were the 239 Pu-zirconolite specimens, which were sintered with a heat-up rate of 5 C/min. They sintered the 238 Pu-zirconolite specimens with a heat-up rate of 2.5 C/min and obtained specimens with only minor surface cracking. Elemental releases during the 3-day MCC leach tests show that the normalized elemental releases depend on (1) whether the Pu is 239 Pu or 238 Pu, (2) the material type, and (3) the identity of the constituent. The effect of the Pu isotope in the ceramic is most dramatic for Pu release, with nominally 50 to 100 times more Pu activity released from the 238 Pu specimens. This is unlikely to be an early indicator of radiation damage, because of the short time between specimen preparation and testing. In contrast greater amounts of Mo are released from the 239 Pu specimens. Of the contained constituents, Ca Al, Pu, and U are the species found at relatively higher levels in the leachates

Preparation, Modification, Characterization, and Biosensing Application of Nanoporous Gold Using Electrochemical Techniques.

Science.gov (United States)

Bhattarai, Jay K; Neupane, Dharmendra; Nepal, Bishal; Mikhaylov, Vasilii; Demchenko, Alexei V; Stine, Keith J

2018-03-16

Nanoporous gold (np-Au), because of its high surface area-to-volume ratio, excellent conductivity, chemical inertness, physical stability, biocompatibility, easily tunable pores, and plasmonic properties, has attracted much interested in the field of nanotechnology. It has promising applications in the fields of catalysis, bio/chemical sensing, drug delivery, biomolecules separation and purification, fuel cell development, surface-chemistry-driven actuation, and supercapacitor design. Many chemical and electrochemical procedures are known for the preparation of np-Au. Recently, researchers are focusing on easier and controlled ways to tune the pores and ligaments size of np-Au for its use in different applications. Electrochemical methods have good control over fine-tuning pore and ligament sizes. The np-Au electrodes that are prepared using electrochemical techniques are robust and are easier to handle for their use in electrochemical biosensing. Here, we review different electrochemical strategies for the preparation, post-modification, and characterization of np-Au along with the synergistic use of both electrochemistry and np-Au for applications in biosensing.

Characterization of silver/polystyrene nanocomposites prepared by in situ bulk radical polymerization

Energy Technology Data Exchange (ETDEWEB)

Vukoje, Ivana D., E-mail: ivanav@vinca.rs [Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia); Vodnik, Vesna V., E-mail: vodves@vinca.rs [Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia); Džunuzović, Jasna V., E-mail: jasnav2002@googlemail.com [Institute of Chemistry, Technology and Metallurgy (ICTM)-Center of Chemistry, University of Belgrade, Studentski trg 12-16, 11000 Belgrade (Serbia); Džunuzović, Enis S., E-mail: edzunuzovic@tmf.bg.ac.rs [Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade (Serbia); Marinović-Cincović, Milena T., E-mail: milena@vinca.rs [Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia); Jeremić, Katarina, E-mail: kjeremic@tmf.bg.ac.rs [Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade (Serbia); Nedeljković, Jovan M., E-mail: jovned@vinca.rs [Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade (Serbia)

2014-01-01

Graphical abstract: - Highlights: • Synthesis and characterization of polystyrene nanocomposites based on Ag nanoparticles. • The glass transition temperature decreased in nanocomposites with respect to the pure polymer. • Resistance of the polymer to thermal degradation enhanced with Ag nanoparticles content. - Abstract: Nanocomposites (NCs) with different content of silver nanoparticles (Ag NPs) embeded in polystyrene (PS) matrix were prepared by in situ bulk radical polymerization. The nearly monodisperse Ag NPs protected with oleylamine were synthesized via organic solvo-thermal method and further used as a filler. The as-prepared spherical Ag NPs with diameter of 7.0 ± 1.5 nm were well dispersed in the PS matrix. The structural properties of the resulting Ag/PS NCs were characterized by transmission electron microscope (TEM) and Fourier transform infrared (FTIR) spectroscopy, while optical properties were characterized using optical absorption measurements. The gel permeation chromatography (GPC) measurements showed that the presence of Ag NPs stabilized with oleylamine has no influence on the molecular weight and polydispersity of the PS matrix. The influence of silver content on the thermal properties of Ag/PS NCs was investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results indicated that resistance of PS to thermal degradation was improved upon incorporation of Ag NPs. The Ag/PS NCs have lower glass transition temperatures than neat PS because loosely packed oleylamine molecules at the interface caused the increase of free volume and chain segments mobility near the surface of Ag NPs.

Development, preparation and characterization of uranium molybdenum alloys for dispersion fuel application

Energy Technology Data Exchange (ETDEWEB)

Sinha, V.P. [Metallic Fuels Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)], E-mail: vedsinha@barc.gov.in; Prasad, G.J.; Hegde, P.V.; Keswani, R.; Basak, C.B.; Pal, S.; Mishra, G.P. [Metallic Fuels Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)

2009-04-03

Most of the research and test reactors worldwide have undergone core conversion from high enriched uranium base fuel to low enriched uranium base fuel under the Reduced Enrichment for Research and Test Reactor (RERTR) program, which was launched in the late 1970s to reduce the risk of nuclear proliferation. To realize this goal, high density uranium compounds and {gamma}-stabilized uranium alloy powder were identified. In Metallic Fuels Division of BARC, R and D efforts are on to develop these high density uranium base alloys. This paper describes the preparation flow sheet for different compositions of Uranium and molybdenum alloys by an innovative powder processing route with uranium and molybdenum metal powders as starting materials. The same composition of U-Mo alloys were also fabricated by conventional method i.e. ingot metallurgy route. The U-Mo alloys prepared by both the methods were then characterized by XRD for phase analysis. The photomicrographs of alloys with different compositions prepared by powder metallurgy and ingot metallurgy routes are also included in the paper. The paper also covers the comparison of properties of the alloys prepared by powder metallurgy and ingot metallurgy routes.

Development, preparation and characterization of uranium molybdenum alloys for dispersion fuel application

International Nuclear Information System (INIS)

Sinha, V.P.; Prasad, G.J.; Hegde, P.V.; Keswani, R.; Basak, C.B.; Pal, S.; Mishra, G.P.

2009-01-01

Most of the research and test reactors worldwide have undergone core conversion from high enriched uranium base fuel to low enriched uranium base fuel under the Reduced Enrichment for Research and Test Reactor (RERTR) program, which was launched in the late 1970s to reduce the risk of nuclear proliferation. To realize this goal, high density uranium compounds and γ-stabilized uranium alloy powder were identified. In Metallic Fuels Division of BARC, R and D efforts are on to develop these high density uranium base alloys. This paper describes the preparation flow sheet for different compositions of Uranium and molybdenum alloys by an innovative powder processing route with uranium and molybdenum metal powders as starting materials. The same composition of U-Mo alloys were also fabricated by conventional method i.e. ingot metallurgy route. The U-Mo alloys prepared by both the methods were then characterized by XRD for phase analysis. The photomicrographs of alloys with different compositions prepared by powder metallurgy and ingot metallurgy routes are also included in the paper. The paper also covers the comparison of properties of the alloys prepared by powder metallurgy and ingot metallurgy routes

Preparation and characterization of dopamine-decorated hydrophilic carbon black

Energy Technology Data Exchange (ETDEWEB)

Zhu Lijun; Lu Yonglai [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Key Laboratory of Beijing City on Preparation and Processing of Novel Polymer Materials, Beijing 100029 (China); Wang Yiqing [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing 100029 (China); Zhang Liqun [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Key Laboratory of Beijing City on Preparation and Processing of Novel Polymer Materials, Beijing 100029 (China); Wang Wencai, E-mail: wangw@mail.buct.edu.cn [State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing 100029 (China)

2012-05-01

Inspired by the bio-adhesive proteins secreted by mussels for attachment to almost all wet substrates, a facile method involving oxidative polymerization of dopamine was proposed to prepare highly hydrophilic carbon black (CB) particles. A self-assembled polydopamine (PDA) ad-layer was formed via the oxidative polymerization of dopamine on the surface of CB simply by dipping the CB into an alkaline dopamine solution and mildly stirring at room temperature. The process is simple, controllable, and environment-friendly. The surface composition and structure of the CB were characterized by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The surface morphology of the CB was observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results showed that the PDA ad-layer was successfully deposited on the CB surfaces. The PDA-functionalized CB (CB-PDA) gave a stable colloidal dispersion in water. Contact angle measurement results indicated that the hydrophilicity of CB was significantly improved after dopamine modification. TGA results confirmed that the modified CB maintained good heat resistance. The method provided a facile route to prepare hydrophilic CB having terminal hydroxyl groups.

Artesunate-loaded chitosan/lecithin nanoparticles: preparation, characterization, and in vivo studies.

Science.gov (United States)

Chadha, Renu; Gupta, Sushma; Pathak, Natasha

2012-12-01

Artesunate (AST), the most widely used artemisnin derivative, has poor aqueous solubility and suffers from low oral bioavailability (~40%). Under these conditions, nanoparticles with controlled and sustained released properties can be a suitable solution for improving its biopharmaceuticals properties. This work reports the preparation and characterization of auto-assembled chitosan/lecithin nanoparticles loaded with AST and AST complexed with β-cyclodextrin (β-CD) to boost its antimalarial activity. The nanoparticles prepared by direct injection of lecithin alcoholic solution into chitosan/water solution have shown the particle size distribution below 300 nm. Drug entrapment efficiency was found to be maximum (90%) for nanoparticles containing 100 mg of AST. Transmission electron microscopy images show spherical shape with contrasted corona (chitosan) surrounded by a lipidic core (lecithin + isopropyl myristate). Differential scanning calorimeter thermograms demonstrated the presence of drug in drug-loaded nanoparticles along with the disappearance of decomposition exotherm suggesting the increased physical stability of drug in prepared formulations. Negligible changes in the characteristic peaks of drug in Fourier-transform infrared spectra indicated the absence of any interaction among the various components entrapped in the nanoparticle formulation. In vitro drug release behavior was found to be influenced by pH value. Increased in vivo antimalarial activity in terms of less mean percent parasitemia was observed in infected Plasmodium berghei mice after the oral administration of all the prepared nanoparticle formulations.

Preparation and characterization of strontium-fluorapatite nanopowders by sol-gel method

Science.gov (United States)

Kamaei, Maryam; Fathi, Mohammad Hossein

2018-01-01

Biomaterials based on calcium orthophosphate are especially attractive for use in medicine, for bone and teeth implants due to their biological properties, such as biocompatibility and bioactivity. Among them, hydroxyapatite (HAP; Ca10(PO4)6(OH)2) is used particularly because of its similarities to the inorganic component of bone. Hydroxyapatite has been widely used for biomedical applications. Despite desirable properties such as bioactivity, biocompatibility, solubility and adsorption, synthetic HA is limited in application due to poor thermostability and poor mechanical properties. Properties of HA can be tailored over a wide range by incorporating different ions into HA lattice. Use of the sol-gel technique is technically simple, cost effective and beneficial for fabrication biomaterials. This research aimed to prepare and characterize Sr-doped FA nanopowders (Sr-FA). Sr-FA with different Sr contents was prepared by sol-gel method. The designated degree of substitution of Ca by Sr in the mixture was determined by the x value in the general formula of (Ca10-x Srx(PO4)6F2), where x=0,0.5,1. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) techniques were utilized to characterize the obtained nano powders. Results showed that Sr ions entered into the fluorapatite lattice and occupied Ca sites. The incorporation of Sr ions into the fluorapatite resulted in the increase of the lattice parameters.

Preparation, Characterization, and Photocatalytic Activity of TiO2/ZnO Nanocomposites

Directory of Open Access Journals (Sweden)

Liqin Wang

2013-01-01

Full Text Available Nanoparticles of the TiO2/ZnO composite photocatalysts were prepared via sol-gel process. The crystalline structure, morphology, thermal stability, and pore structure properties of the composite photocatalysts were characterized by XRD, FE-SEM, TG-DTA, and N2 physical adsorption measurements. The photocatalytic activity of the composite catalysts was evaluated by photocatalytic degradation reaction of methyl orange (MO in aqueous solution. The best preparation parameters for the composite photocatalysts were obtained through systematical experiments. Furthermore, the photocatalytic degradation reaction of aqueous MO solution followed the first-order reaction kinetics; the relative equation can be described as ln(C0/C=0.5689t, and the calculated correlation constant (R2 is 0.9937 for the calibration curve.

Overview on the Preparation and Characterization of some Itaconic Acid Chelating Copolymers

International Nuclear Information System (INIS)

Abd El-Ghaffar, M.A.; Youssef, E.A.; El-Halawany, N.R.

2005-01-01

Itaconic acid (IA) was copolymerised by an emulsion process with butyl acrylate (BuA), butyl methacrylate (BuMA) and styrene (St) using potassium persulphate/sodium meta bisulphite as a redox initiation system and sodium dodecyl benzene sulfonate as an emulsifier. The rate of copolymerization was found to decrease with increasing (IA) content . The prepared copolymers were characterized by spectrophotometric analysis (IR and lINMR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) . The monomer reactivity ratios (r1and r2) for the prepared copolymers were determined and discussed . The copolymers having the best properties were incorporated in latex paint formulations. The Ac.. conductivity of the binary itaconic copolymers have been investigated and studied at room temperature and showed semiconducting properties

Preparation and characterization of polyurethane plasticizer for flexible packaging applications: Natural oils affirmed access

Directory of Open Access Journals (Sweden)

Mohammed A. Mekewi

2017-03-01

Full Text Available Developing bio-renewable feedstock for polyurethane (PU manufacturing and polymer industry as a whole has become highly desirable for both economic and environmental reasons. In this work castor oil (CO and palm olein (PO polyols were synthesized and partially used as renewable feedstock for the manufacturing of polyurethane plasticizing resin for printing ink applications. The chemical structure of the prepared polyols and polyurethanes were characterized using IR spectra and GPC and their solubility in common solvents was tested. As well, properties such as flexibility, mechanical properties, optical properties, heat seal and freeze resistance of these prepared printing inks were determined. The results indicated that the prepared printing inks from 50% synthesized polyurethane have high thermal stability, adhesion and excellent freeze resistance. The net technical properties of the new ink formulations are relatively comparable to the printing ink prepared from standard polyurethane plasticizer.

Preparation and characterization of (3-aminopropyl)triethoxysilane-coated magnetite nanoparticles

International Nuclear Information System (INIS)

Yamaura, M.; Camilo, R.L.; Sampaio, L.C.; Macedo, M.A.; Nakamura, M.; Toma, H.E.

2004-01-01

Magnetite nanoparticles coated with (3-aminopropyl)triethoxysilane, NH 2 (CH 2 ) 3 Si(OC 2 H 5 ) 3 , were prepared by silanization reaction and characterized by X-ray diffractometry, transmission electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy and magnetization measurements. Both uncoated and organosilane-coated magnetite exhibited superparamagnetic behavior and strong magnetization at room temperature. Basic groups anchored on the external surface of the coated magnetite were observed. The superparamagnetic particles of coated magnetite are able to bind to biological molecules, drugs and metals and in this way remove them from medium by magnetic separation procedures

Study on multipartite quantum states: preparation, simulation, and characterization

International Nuclear Information System (INIS)

Kruszynska, C.

2009-01-01

In this thesis different problems are investigated related to the description as well as the manipulation of multipartite quantum states. Because of the superposition principle, the state of a composite quantum system can be entangled, i.e. exhibit quantum correlations between the sites. The entanglement of two-qubit systems is well understood. There is only one kind of entanglement which can be directly related to the value of the Schmidt coefficients. However this is not the case for multipartite entanglement of qubit systems. Unlike in the two-qubit case, a multipartite quantum state can be entangled in many different ways, which complicates the classification and characterization of such states. The storage and manipulation of a quantum state is a challenging task because of the decoherence resulting from the interaction of the state with its environment. One way to overcome this difficulty is to use entanglement purification which will be the subject of the first part of this thesis. Entanglement purification allows to extract a small number of nearly pure states out of a bigger set of mixed states. We review existing bipartite and multipartite entanglement purification protocols and introduce new protocols which are capable of purifying any graph state, enlarging by this the class of states which can be purified. The second part deals with the preparation and distribution of high-fidelity multi-party entangled states via noisy channels and operations. In the particular case of GHZ and cluster states, we study different strategies using bipartite or multipartite purification protocols. The most efficient strategy depends on the target fidelity one wishes to achieve and on the quality of transmission channel and local operations. We show the existence of a crossing point beyond which the strategy making use of the purification of the state as a whole is more efficient than a strategy in which pairs are purified before they are connected to the final state. We

Structural and morphological characterization of fullerite crystals prepared from the vapor phase

International Nuclear Information System (INIS)

Haluska, M.; Fejdi, P.; Vybornov, M.; Kuzmany, H.

1993-01-01

Crystal structure, habits and surface structures of fullerite crystals prepared from vapor phase were characterized by X-ray analysis, interfacial angle measurements and optical and scanning electron microscopy (SEM). The study of selected C 60 crystals confirmed the fcc structure at room temperature. The crystal habit is determined by two types of morphological faces, namely {100} and {111}. SEM was used for the observation of thermal etched surfaces. (orig.)

Preparation and characterization of poly(lactic acid)/ zinc-aluminium layered double hydroxide nano composites

International Nuclear Information System (INIS)

Eili Mahboobeh; Wan Mohd Zin Wan Yunus; Zobir Hossein; Mansor Ahmad; Norazowa Ibrahim

2009-01-01

Full text: Poly (lactic acid)/ stearate - zinc aluminum layered double hydroxide/ (PLA/ SZnAl LDH) nano composites were prepared via solution intercalation process using a modified ZnAl LDH. The anionic clay Zn 3 Al-NO 3 -LDH was prepared by a co-precipitation method and then modified with stearate ions by ion exchange process. Stearate-ZnAl LDH particles were then homogeneously dispersed in PLA matrix by a solution casting method. The pristine and modified ZnAl LDH was characterized by X-ray diffraction (XRD) and Fourier transforms infrared (FTIR) spectroscopy which suggested that the modification was successful. The XRD analysis showed that during modification of LDH, the basal spacing increased from 8.83 Angstrom to 40.1 Angstrom. The PLA/ ZnAl LDH nano composites were characterized by tensile testing and XRD. The obtained nano composites showed dramatic enhancements in elongation at break as compared to those of the pure PLA. XRD results indicated that the materials formed are nano composites. (author)

Poly (acrylonitrile-co-methyl methacrylate nanoparticles: I. Preparation and characterization

Directory of Open Access Journals (Sweden)

M.S. Mohy Eldin

2017-12-01

Full Text Available This work concerns the preparation and characterization of poly (acrylonitrile-co-methyl methacrylate Copolymer, P(AN-co-MMA, nano-particles using precipitation polymerization technique. Potassium per-sulfate redox initiation system was used to perform polymerization process in an alcoholic aqueous system. The impact of different polymerization conditions such as comonomer concentration and ratio, polymerization time, polymerization temperatures, initiator concentration and co-solvent composition on the polymerization yield and particle size was studied. Maximum polymerization yield, 70%, was obtained with MMA:AN (90%:10% comonomer composition. Particle sizes ranging from 16 nm to 1483 nm were obtained and controlled by variation of polymerization conditions. The co-polymerization process was approved by FT-IR and TGA analysis. The copolymer composition was investigated by nitrogen content analysis. Copolymers with a progressive percentage of PAN show thermal stabilities close to PAN Homopolymer. SEM photographs prove spherical structure of the produced copolymers. The investigated system shows promising future in the preparation of nanoparticles from comonomers without using emulsifiers or dispersive agents.

Preparation and characterization of bagasse/HDPE composites using multi-walled carbon nanotubes.

Science.gov (United States)

Ashori, Alireza; Sheshmani, Shabnam; Farhani, Foad

2013-01-30

This article presents the preparation and characterization of bagasse/high density polyethylene (HDPE) composites. The effects of multi-walled carbon nanotubes (MWCNTs), as reinforcing agent, on the mechanical and physical properties were also investigated. In order to increase the interphase adhesion, maleic anhydride grafted polyethylene (MAPE) was added as a coupling agent to all the composites studied. In the sample preparation, MWCNTs and MAPE contents were used as variable factors. The morphology of the specimens was characterized using scanning electron microscopy (SEM) technique. The results of strength measurement indicated that when 1.5 wt% MWCNTs were added, tensile and flexural properties reached their maximum values. At high level of MWCNTs loading (3 or 4 wt%), increased population of MWCNTs lead to agglomeration and stress transfer gets blocked. The addition of MWCNTs filler slightly decreased the impact strength of composites. Both mechanical and physical properties were improved when 4 wt% MAPE was applied. SEM micrographs also showed that the surface roughness improved with increasing MAPE loading from 0 to 4 wt%. The improvement of physicomechanical properties of composites confirmed that MWCNTs have good reinforcement and the optimum synergistic effect of MWCNTs and MAPE was achieved at the combination of 1.5 and 4 wt%, respectively. Copyright © 2012 Elsevier Ltd. All rights reserved.

Preparation and Characterizations of Chitosan/Citral Nanoemulsions and their Antimicrobial Activity

Directory of Open Access Journals (Sweden)

Gehan I. Kh. Marei

2018-03-01

Full Text Available Background and Objective: The antimicrobial activity of essential oils has been long recognized, however, they easily evaporate and/or decompose during preparation, owing to direct exposure to heat, pressure and light. The current study deals with the formulation and characterization of bio-based oil in water nanoemulsions and their antimicrobial activity against plant pathogens.Material and Methods: Citral oil and low molecular weight chitosan were used for preparation of nanoemulsions in the presence of sodium tripolyphosphate. Nanoemulsions were prepared by adding dropwise citral at different ratios into an aqueous solution containing chitosan, sodium tripolyphosphate and surfactant with continuous stirring and then ultrasonication. The success of formulation was confirmed by dynamic light scattering and scanning electron microscopy techniques. Physical stability and viscosity were investigated in details. The antimicrobial activity was evaluated against Erwinia carotovora, Aspergillus niger and Rhizopus stolonifer. Results and Conclusion: The nanoemulsions had a polydispersity index ranged from 0.508 to 0.614 and particle size from 27 to 1283 nm. The highest antimicrobial activity was observed with F1 formulation (EC50 = 23, 278 and 221 mg L-1, against Erwinia carotovora, Aspergillus niger and Rhizopus stolonifer, respectively. Based on the antimicrobial activity, the prepared chitosan/citral nanoemulsions can be a cost-effective way to protect crops from microbial pathogens. Because such formulations contain bioactive products, the development of resistant pathogens can be delayed.Conflict of Interest: The authors declare no conflict of interest. 

Preparation, Modification, Characterization, and Biosensing Application of Nanoporous Gold Using Electrochemical Techniques

Directory of Open Access Journals (Sweden)

Jay K. Bhattarai

2018-03-01

Full Text Available Nanoporous gold (np-Au, because of its high surface area-to-volume ratio, excellent conductivity, chemical inertness, physical stability, biocompatibility, easily tunable pores, and plasmonic properties, has attracted much interested in the field of nanotechnology. It has promising applications in the fields of catalysis, bio/chemical sensing, drug delivery, biomolecules separation and purification, fuel cell development, surface-chemistry-driven actuation, and supercapacitor design. Many chemical and electrochemical procedures are known for the preparation of np-Au. Recently, researchers are focusing on easier and controlled ways to tune the pores and ligaments size of np-Au for its use in different applications. Electrochemical methods have good control over fine-tuning pore and ligament sizes. The np-Au electrodes that are prepared using electrochemical techniques are robust and are easier to handle for their use in electrochemical biosensing. Here, we review different electrochemical strategies for the preparation, post-modification, and characterization of np-Au along with the synergistic use of both electrochemistry and np-Au for applications in biosensing.

Preparation and characterization of kefiran electrospun nanofibers.

Science.gov (United States)

Esnaashari, Seyedeh Sara; Rezaei, Sasan; Mirzaei, Esmaeil; Afshari, Hamed; Rezayat, Seyed Mahdi; Faridi-Majidi, Reza

2014-09-01

In this study, we report the first successful production of kefiran nanofibers through electrospinning process using distilled water as solvent. For this purpose, kefiran was extracted from cultured kefir grains, and homogenous kefiran solutions with different concentrations were prepared and then electrospun to obtain uniform nanofibers. The effect of main process parameters, including applied voltage, tip-to-collector distance, and feeding rate, on diameter and morphology of produced nanofibers, was studied. Scanning electron microscopy (SEM) and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy were used to characterize electrospun mats. Rheological behavior of the kefiran solution was evaluated via a cone and plate rheometer too. The results exhibited that diameter of kefiran nanofibers increased with increasing polymer concentration, applied voltage, and polymer feeding rate, while tip-to-collector distance did not have significant effect on nanofiber diameter. ATR-FTIR spectra showed that kefiran has maintained its molecular structure during electrospinning process. Flow curves also demonstrated shear thinning behavior for kefiran solutions. Copyright © 2014 Elsevier B.V. All rights reserved.

Characterization of dicalcium phosphate dihydrate cements prepared using a novel hydroxyapatite-based formulation

International Nuclear Information System (INIS)

Alge, Daniel L; Cruz, Grace Santa; Chu, Tien-Min Gabriel; Goebel, W Scott

2009-01-01

Dicalcium phosphate dihydrate (DCPD) cements are typically prepared using β-tricalcium phosphate (β-TCP) as the base component. However, hydroxyapatite (HA) is an interesting alternative because of its potential for reducing cement acidity, as well as modulating cement properties via ionic substitutions. In the present study, we have characterized DCPD cements prepared with a novel formulation based on monocalcium phosphate monohydrate (MCPM) and HA. Cements were prepared using a 4:1 MCPM:HA molar ratio. The reactivity of HA in this system was verified by showing DCPD formation using poorly crystalline HA, as well as highly crystalline HA. Evaluation of cements prepared with poorly crystalline HA revealed that setting occurs rapidly in the MCPM/HA system, and that the use of a setting regulator is necessary to maintain workability of the cement paste. Compressive testing showed that MCPM/HA cements have strengths comparable to what has previously been published for DCPD cements. However, preliminary in vitro analysis of cement degradation revealed that conversion of DCPD to HA may occur much more rapidly in the MCPM/HA system compared to cements prepared with β-TCP. Future studies should investigate this property further, as it could have important implications for the use of HA-based DCPD cement formulations.

Distinct deleterious effects of cyclosporine and tacrolimus and combined tacrolimus-sirolimus on endothelial cells: protective effect of defibrotide.

Science.gov (United States)

Carmona, Alba; Díaz-Ricart, Maribel; Palomo, Marta; Molina, Patricia; Pino, Marc; Rovira, Montserrat; Escolar, Ginés; Carreras, Enric

2013-10-01

Endothelial dysfunction seems to be a key factor in the development of several complications observed early after hematopoietic stem cell transplantation (HSCT). The conditioning regimen and many other factors associated with the procedure are responsible for this endothelial damage. The effects of immunosuppressive agents on endothelial function have not been explored in detail. We evaluated the effects of 3 drugs commonly used in HSCT: 2 calcineurin inhibitors, cyclosporine A (CSA) and tacrolimus (TAC), and an inhibitor of mTOR, sirolimus (SIR). We also evaluated the effect of the combination of TAC and SIR (TAC+SIR), which is used increasingly in clinical practice. Microvascular endothelial cells (HMEC-1) were exposed to these drugs to evaluate changes in (1) intercellular adhesion molecule (ICAM)-1 expression on the cell surface, assessed by immunofluorescence labeling and expressed as the mean gray value (MGV); (2) reactivity of the extracellular matrix (ECM) toward platelets, upon exposure of the ECM to circulating blood; and (3) whole-blood clot formation, assessed by thromboelastometry. Studies were conducted in the absence and presence of defibrotide (DF) to assess its possible protective effect. The exposure of HMEC-1 to CSA and TAC+SIR significantly increased the expression of ICAM-1 (157.5 ± 11.6 and 153.4 ± 9.5 MGV, respectively, versus 105.7 ± 6.5 MGV in controls [both P < .05]). TAC applied alone increased ICAM-1 slightly (120.3 ± 8.2 MGV), and SIR had no effect (108.9 ± 7.4 MGV). ECM reactivity increased significantly only in response to CSA (surface covered by platelets of 41.2% ± 5.4% versus 30.1% ± 2.0%, P < .05). DF attenuated all these changes. No significant changes in the viscoelastic properties of clot formation were observed in any condition with blood samples incubated in vitro. In conclusion, CSA and TAC+SIR had a proinflammatory effect, but only CSA exhibited an additional prothrombotic effect. Interestingly, DF exerted clear

Age and Early Graft Function Relate With Risk-Benefit Ratio of Allogenic Islet Transplantation Under Antithymocyte Globulin-Mycophenolate Mofetil-Tacrolimus Immune Suppression.

Science.gov (United States)

Lee, DaHae; Keymeulen, Bart; Hilbrands, Robert; Ling, Zhidong; Van de Velde, Ursule; Jacobs-Tulleneers-Thevissen, Daniel; Maleux, Geert; Lapauw, Bruno; Crenier, Laurent; De Block, Christophe; Mathieu, Chantal; Pipeleers, Daniel; Gillard, Pieter

2017-09-01

Induction therapy with a T cell-depleting agent followed by mycophenolate mofetil and tacrolimus is presently the most frequently used immune suppression (IS) regimen in islet transplantation. This study assesses its safety and tolerability in nonuremic type 1 diabetic recipients. Fifty-one patients (age, between 29 and 63 years) with high glycemic variability and problematic hypoglycemia received intraportal islet grafts under anti-thymocyte globulin-mycophenolate mofetil-tacrolimus protocol. They were followed up for over 48 months for function of the implant and adverse events. Severe hypoglycemia and diabetic ketoacidosis were absent in patients with functioning graft. Immune suppressive therapy was maintained for 48 months in 29 recipients with sustained function (group A), whereas 16 patients stopped earlier due to graft failure (group B) and in 6 for other reasons. Group A was significantly older at the time of implantation and achieved higher graft function at posttransplantation month 6 under similar dose of IS. Prevalence of IS-related side effects was similar in groups A and B, occurring predominantly during the first year posttransplantation. IS-related serious adverse events (SAE) were reported in 47% of patients, with 4 presenting with cytomegalovirus infection and 4 (age, 42-59 years) diagnosed with cancer. Except in 1 patient with cancer, all SAEs resolved after appropriate treatment. These risk/benefit data serve as a basis for clinical decision-making before entering an intraportal islet transplantation protocol. A longer benefit is observed in recipients of higher age (≥40 years), but it is not associated with more side effects and SAE.

Preparation and Characterization of K-Carrageenan/Nanosilica Biocomposite Film

Directory of Open Access Journals (Sweden)

Lokesh R. Rane

2014-01-01

Full Text Available The purpose of this study is to improve the performance properties of K-carrageenan (K-CRG by utilizing nanosilica (NSI as the reinforcing agent. The composite films were prepared by solution casting method. NSI was added up to 1.5% in the K-CRG matrix. The prepared films were characterized for mechanical (tensile strength, tensile modulus, and elongation at break, thermal (differential scanning calorimetry, thermogravimetric analysis, barrier (water vapour transmission rate, morphological (scanning electron microscopy, contact angle, and crystallinity properties. Tensile strength, tensile modulus, and crystallinity were found to have increased by 13.8, 15, and 48% whereas water vapour transmission rate was found to have decreased by 48% for 0.5% NSI loaded K-CRG composite films. NSI was found to have formed aggregates for concentrations above 0.5% as confirmed by scanning electron microscopy. Melting temperature, enthalpy of melting, and degradation temperature of K-CRG increased with increase in concentration of NSI in K-CRG. Contact angle also increased with increase in concentration of NSI in K-CRG, indicating the decrease in hydrophilicity of the films improving its water resistance properties. This knowledge of the composite film could make beneficial contributions to the food and pharmaceutical packaging applications.

Preparation and characterization of ω-functionalized polystyrene-magnetite nanocomposites

International Nuclear Information System (INIS)

Jiang Liming; Sun Weilin; Kim, Jungahn

2007-01-01

Magnetite (Fe 3 O 4 ) nanoparticles were prepared by in situ precipitation and oxidation of ferrous ions in the presence of ω-functionalized polystyrenes having carboxylate, sulfonate, thiol, and thiolated groups. Based on the results for the orthogonal experimental design, both the ratio of the concentration of iron precursor to polymer and the reaction temperature were the major factors controlling the particle size and its shape morphology. By adjusting the reaction conditions, the iron oxide particle size can be effectively controlled in the range between 2 and 20 nm. The magnetite-based polymer composite was characterized by UV-vis spectroscopy, thermogravimetric analysis, transmission electron microscopy, and X-ray diffraction. Magnetization measurements revealed that the nanocomposite materials exhibit superparamagnetic behavior at room temperature

Preparation and characterization of {omega}-functionalized polystyrene-magnetite nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Jiang Liming [Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027 (China)]. E-mail: cejlm@zju.edu.cn; Sun Weilin [Department of Polymer Science and Engineering, Zhejiang University, Hangzhou 310027 (China); Kim, Jungahn [Polymer Hybrids Center, Korea Institute of Science and Technology, Seoul 130-650 (Korea, Republic of)

2007-02-15

Magnetite (Fe{sub 3}O{sub 4}) nanoparticles were prepared by in situ precipitation and oxidation of ferrous ions in the presence of {omega}-functionalized polystyrenes having carboxylate, sulfonate, thiol, and thiolated groups. Based on the results for the orthogonal experimental design, both the ratio of the concentration of iron precursor to polymer and the reaction temperature were the major factors controlling the particle size and its shape morphology. By adjusting the reaction conditions, the iron oxide particle size can be effectively controlled in the range between 2 and 20 nm. The magnetite-based polymer composite was characterized by UV-vis spectroscopy, thermogravimetric analysis, transmission electron microscopy, and X-ray diffraction. Magnetization measurements revealed that the nanocomposite materials exhibit superparamagnetic behavior at room temperature.

Characterization of TPS/PHBV blends prepared in the presence of maleated PHBV

International Nuclear Information System (INIS)

Magalhaes, Natalia F.; Andrade, Cristina T.

2011-01-01

Maleated derivatives of poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHBV) were obtained in an internal mixer in the presence of maleic anhydride and benzoyl peroxide, and characterized by infrared spectroscopy. Extruded blends of cornstarch and PHBV were prepared with and without the addition of maleated PHBV. Although the X-ray diffractograms had revealed decreased crystallinity, the micrographs obtained by scanning electron microscopy indicated that the addition of the maleated derivatives led to a partial compatibilization. (author)

Preparation, characterization and in vitro dissolution study of Nitrazepam: Cyclodextrin inclusion complex

OpenAIRE

Patel, J. S.; Patel, R. P.

2012-01-01

The objectives of this research were to prepare and characterize inclusion complexes of Nitrazepam with Hydroxypropyl-β-cyclodextrin (HPβCD) and Sulfobutyl ether β-cyclodextrin (SBEβCD) to study the effect of complexation on the dissolution rate of Nitrazepam, a water-insoluble drug. The phase solubility profile of Nitrazepam with Hydroxypropyl- β-cyclodextrin and Sulfobutyl ether β-cyclodextrin was an AP-type, indicating the formation of 2:1 stoichiometric inclusion complexes. Gibbs free ene...

The Preparation and Characterization of Tourmaline-Containing Functional Copolymer p (VST/MMA/BA

Directory of Open Access Journals (Sweden)

Yingmo Hu

2018-01-01

Full Text Available Tourmaline was modified with vinyl triethoxysilane containing double bond to prepare the polymerizable organic vinylsiliconoxyl tourmaline (VST and then copolymerized with methyl methacrylate (MMA and butyl acrylate (BA to produce the tourmaline-containing functional copolymer p (VST/MMA/BA. The structures and morphologies of VST and p (VST/MMA/BA copolymer were characterized by IR, SEM, and EDX. The experimental results indicated that tourmaline was introduced into the copolymer via surface modification and the tourmaline-containing functional copolymer was obtained by a copolymerization process with MMA and BA. The prepared p (VST/MMA/BA copolymer displayed excellent storage stabilities, high far-infrared radiation and negative ion releasing performances, and good mechanical properties.

EDTA modified glassy carbon electrode: Preparation and characterization

International Nuclear Information System (INIS)

Ustuendag, Zafer; Solak, Ali Osman

2009-01-01

EDTA-phenoxyamide modified glassy carbon electrode (EDTA-GC) was prepared at a glassy carbon electrode by surface synthesis. In the first step, nitrophenyl was grafted to the glassy carbon (GC) surface via the electrochemical reduction of its tetraflouroborate diazonium salt. In the second step, nitrophenyl-modified electrode (NP-GC) was subjected to the cathodic potential scan to reduce the nitro to amine group. p-Aminophenyl modified glassy carbon electrode (AP-GC) was dipped into a EDTA solution containing 1-ethyl-3(3-(dimethlyamino)propyl)-carbodiimide (EDC) as an activating agent. Thus formed ((2-anilino-2-oxoethyl){2-[bis(carboxymethyl)amino]-ethyl}amino)acetic acid modified GC electrode was denoted as EDTA-GC and characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), ellipsometry and X-ray photoelectron spectroscopy (XPS). Complexation of the EDTA-GC surface with Pb 2+ ions was investigated if this electrode could be used as a metal sensor.

Automated processing of whole blood samples for the determination of immunosuppressants by liquid chromatography tandem-mass spectrometry.

Science.gov (United States)

Vogeser, Michael; Spöhrer, Ute

2006-01-01

Liquid chromatography tandem-mass spectrometry (LC-MS/MS) is an efficient technology for routine determination of immunosuppressants in whole blood; however, time-consuming manual sample preparation remains a significant limitation of this technique. Using a commercially available robotic pipetting system (Tecan Freedom EVO), we developed an automated sample-preparation protocol for quantification of tacrolimus in whole blood by LC-MS/MS. Barcode reading, sample resuspension, transfer of whole blood aliquots into a deep-well plate, addition of internal standard solution, mixing, and protein precipitation by addition of an organic solvent is performed by the robotic system. After centrifugation of the plate, the deproteinized supernatants are submitted to on-line solid phase extraction, using column switching prior to LC-MS/MS analysis. The only manual actions within the entire process are decapping of the tubes, and transfer of the deep-well plate from the robotic system to a centrifuge and finally to the HPLC autosampler. Whole blood pools were used to assess the reproducibility of the entire analytical system for measuring tacrolimus concentrations. A total coefficient of variation of 1.7% was found for the entire automated analytical process (n=40; mean tacrolimus concentration, 5.3 microg/L). Close agreement between tacrolimus results obtained after manual and automated sample preparation was observed. The analytical system described here, comprising automated protein precipitation, on-line solid phase extraction and LC-MS/MS analysis, is convenient and precise, and minimizes hands-on time and the risk of mistakes in the quantification of whole blood immunosuppressant concentrations compared to conventional methods.

Preparation and characterization of Ce-doped HfO{sub 2} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Gálvez-Barboza, S. [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico); Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Av. Industria Metalúrgica # 1062 Parque Industrial, C.P. 25900 Ramos Arizpe, Coahuila (Mexico); González, L.A. [Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional, Av. Industria Metalúrgica # 1062 Parque Industrial, C.P. 25900 Ramos Arizpe, Coahuila (Mexico); Puente-Urbina, B.A.; Saucedo-Salazar, E.M. [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico); García-Cerda, L.A., E-mail: luis.garcia@ciqa.edu.mx [Centro de Investigación en Química Aplicada, Departamento de Materiales Avanzados, Blvd. Enrique Reyna Hermosillo #140, C.P. 25294 Saltillo, Coahuila (Mexico)

2015-09-15

Highlights: • Ce-doped HfO{sub 2} nanoparticles were prepared by a modified solgel method. • Ce-doped HfO{sub 2} nanoparticles have a semispherical shape with sizes between 6 and 11.5 nm. • The samples doped with 10% in weight of Ce directly crystallized in a cubic structure. • A quick, straightforward and effective route for the preparation of Ce-doped nanoparticles. - Abstract: A modified solgel method to synthesize Ce-doped HfO{sub 2} nanoparticles was carried out using a precursor material prepared with cerium nitrate, hafnium chloride, citric acid and ethylene glycol. The obtained precursor material was calcined at 500 and 700 °C for 2 h in air. The influence of the concentration of Ce and the calcination temperature was studied to observe the structural and morphological changes of the obtained materials. For the characterization, X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman scattering (RS) were employed. The XRD patterns shown that the Ce-doped HfO{sub 2} undergoes a structural transformation from monoclinic to cubic phase, which is significantly dependent on the Ce content and calcination temperature. TEM images have also confirmed the existence of semispherical nanoparticles with sizes between 6 and 11.5 nm.

Prepare and characterization of nanocomposite - mixed matrix membranes based on polycarbonate

International Nuclear Information System (INIS)

Paranhos, Caio M.; Pessan, Luiz A.; Gomes, Ana C. de O.

2009-01-01

Mixed matrix membranes based on polycarbonate with different content of sepiolite were prepared by casting. The obtained membranes were characterized by wide-angle X-ray diffraction, thermal analysis, optical transparency and permeation to oxygen. The presence of sepiolite leads to the formation of a polymer-clay interface. The presence of the interface causes the increase in O 2 permeation. Increasing content of sepiolite results in aggregates of sepiolite, which forms preferential channels to the O 2 molecules. This fact is directly related to the strong increasing observed in O 2 permeability. (author)

Preparation and Characterization of Super-paramagnetic Nano-beads for DNA Isolation

Institute of Scientific and Technical Information of China (English)

Xin XIE; Xu ZHANG; Bing Bin YU; wei Yang FE

2004-01-01

Unique coupling reagent, bis-(2-hydroxyethyl methacrylate) phosphate was used to prepare coated and functionalized superparamagnetic nanobeads, leading to a simple, effective method for coating the nanobeads. With this method, the thickness of the coating layer and the functional group contents on the nano-beads could be controlled by changing the quantity of the coated monomers. The nanobeads were characterized by means of transmission electron microscopy (TEM) and Fourier transformation infrared spectroscopy (FTIR). The carboxyl-modified magnetic nano-beads were employed to streamline the protocol of isolation of genomic DNA from the human whole blood.

Preparation and characterization of nickel catalysts supported on cerium for obtaining hydrogen from steam reforming of ethanol

International Nuclear Information System (INIS)

Urbaninho, A.B.; Bergamaschi, V.S.; Ferreira, J.C.

2016-01-01

The Ni/Ce catalysts for were prepared by co- precipitation method with a view to their use in steam reforming of ethanol to produce a hydrogen-rich gas mixture. The catalysts were characterized by scanning electron microscopy; x-ray dispersive Spectroscopy and surface area BET method. This paper proposes to prepare, characterize and test nickel catalyst supported on cerium in order to obtain a material with higher activity and selectivity of the catalyst using the steam reforming reaction of ethanol, by varying the reaction temperature, molar ratio water/ethanol and uptime. The catalytic tests were monitored by chemical analysis of syngas from steam reforming of ethanol using an analysis online by gas Chromatograph in the reactor. (author)

Synergistic effects of tacrolimus and azole antifungal compounds in fluconazole-susceptible and fluconazole-resistant Candida glabrata isolates

Directory of Open Access Journals (Sweden)

Laura Bedin Denardi

2015-03-01

Full Text Available In vitro interaction between tacrolimus (FK506 and four azoles (fluconazole, ketoconazole, itraconazole and voriconazole against thirty clinical isolates of both fluconazole susceptible and -resistant Candida glabrata were evaluated by the checkerboard microdilution method. Synergistic, indifferent or antagonism interactions were found for combinations of the antifungal agents and FK506. A larger synergistic effect was observed for the combinations of FK506 with itraconazole and voriconazole (43%, followed by that of the combination with ketoconazole (37%, against fluconazole-susceptible isolates. For fluconazole-resistant C. glabrata, a higher synergistic effect was obtained from FK506 combined with ketoconazole (77%, itraconazole (73%, voriconazole (63% and fluconazole (60%. The synergisms that we observed in vitro, notably against fluconazole-resistant C. glabrata isolates, are promising and warrant further analysis of their applications in experimental in vivo studies.

Preparation and characterization of graphene/turbostratic carbon derived from chitosan film for supercapacitor electrodes

Science.gov (United States)

Hanappi, M. F. Y. M.; Deraman, M.; Suleman, M.; Othman, M. A. R.; Basri, N. H.; Nor, N. S. M.; Hamdan, E.; Sazali, N. E. S.; Tajuddin, N. S. M.

2018-04-01

Electrochemical capacitors or supercapacitors are the potential energy storage devices which are known for having higher specific capacitance and specific energy than electrolytic capacitors. Electric double-layer capacitors (EDLCs) also referred as ultracapacitors is a class of supercapacitors that employ different forms of carbon like activated carbon, CNT, graphene etc., as electrodes. The performance of the supercapacitors is determined by its components namely electrolyte, electrode, etc. Carbon electrodes with high surface area and desired pore size distribution are always preferred and which can be tailored by varying the precursor and method of preparation. In recent years, owing to their low cost, ease of synthesis, high stability and conductivity, the activated carbons derived from biomass precursors have been investigated as potential electrode material for the EDLCs. In this report, we present the preparation and characterization of graphene/turbostratic carbon monolith (CM) electrodes from the carbon grains (CGs) obtained by carbonization (under the flow of nitrogen, N2 gas and over a temperature range from 600 °C to 1000 °C) of biomass precursor chitosan film. The procedure to prepare the chitosan film is described elsewhere. The carbon grains are characterized using Raman spectroscopy (RS) and X-ray diffraction (XRD). We expect that the CGs would have the similar characteristics as graphene and would be a potential electrode material for EDLCs application.

Preparation and characterization of thin organosilicon films deposited on SPR chip

Energy Technology Data Exchange (ETDEWEB)

Szunerits, Sabine [Laboratoire d' Electrochimie et de Physicochimie des Materiaux et des Interfaces (LEPMI), CNRS-INPG-UJF, 1130 rue de la piscine, BP 75, 38402 St. Martin d' Heres Cedex (France)], E-mail: sabine.szunerits@lepmi.inpg.fr; Rich, Sami Abou [Laboratoire de Genie des Procedes d' Interaction de Fluides Reactifs-Materiaux U.S.T.L., Cite Scientifique, 59655 Villeneuve d' Ascq (France); Coffinier, Yannick [Institut de Recherche Interdisciplinaire (IRI), FRE CNRS 2963, Institut d' lectronique, de Microelectronique et de Nanotechnologie (IEMN), UMR CNRS-8520, Cite Scientifique, Avenue Poincare, BP 60069, 59652 Villeneuve d' Ascq (France); Languille, Marie-Angelique [Unite de Catalyse et de Chimie du Solide, UCCS UMR CNRS-8181, Universite des Sciences et Technologies de Lille, Bat. C3, 59655 Villeneuve d' Ascq (France); Supiot, Philippe [Laboratoire de Genie des Procedes d' Interaction de Fluides Reactifs-Materiaux U.S.T.L., Cite Scientifique, 59655 Villeneuve d' Ascq (France); Boukherroub, Rabah [Institut de Recherche Interdisciplinaire (IRI), FRE CNRS 2963, Institut d' lectronique, de Microelectronique et de Nanotechnologie (IEMN), UMR CNRS-8520, Cite Scientifique, Avenue Poincare, BP 60069, 59652 Villeneuve d' Ascq (France)], E-mail: rabah.boukherroub@iemn.univ-lille1.fr

2008-04-20

The paper reports on the preparation and characterization of organosilicon thin polymer films deposited on glass slides coated with 5 nm adhesion layer of titanium and 50 nm of gold. The polymer was obtained by the decomposition of 1,1,3,3-tetramethyldisiloxane precursor (TMDSO) premixed with oxygen induced in a N{sub 2} plasma afterglow using remote plasma-enhanced chemical vapor deposition (PECVD) technique. The film thickness was controlled by laser interferometry and was 9 nm. The chemical stability of the gold substrate coated with the organosilicon polymer film (p-TMDSO) was studied in different acidic and basic solutions (pH 1-14). While the gold/polymer interface showed a high stability in acidic media, the film was almost completely removed in basic solutions. The resulting surfaces were characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), water contact angle measurements, cyclic voltammetry, and surface plasmon resonance (SPR)

Preparation and characterization of thin organosilicon films deposited on SPR chip

International Nuclear Information System (INIS)

Szunerits, Sabine; Rich, Sami Abou; Coffinier, Yannick; Languille, Marie-Angelique; Supiot, Philippe; Boukherroub, Rabah

2008-01-01

The paper reports on the preparation and characterization of organosilicon thin polymer films deposited on glass slides coated with 5 nm adhesion layer of titanium and 50 nm of gold. The polymer was obtained by the decomposition of 1,1,3,3-tetramethyldisiloxane precursor (TMDSO) premixed with oxygen induced in a N 2 plasma afterglow using remote plasma-enhanced chemical vapor deposition (PECVD) technique. The film thickness was controlled by laser interferometry and was 9 nm. The chemical stability of the gold substrate coated with the organosilicon polymer film (p-TMDSO) was studied in different acidic and basic solutions (pH 1-14). While the gold/polymer interface showed a high stability in acidic media, the film was almost completely removed in basic solutions. The resulting surfaces were characterized using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), water contact angle measurements, cyclic voltammetry, and surface plasmon resonance (SPR)

Preparation and Characterization of Graphene

Directory of Open Access Journals (Sweden)

Xu Man

2015-01-01

Full Text Available The homogeneous-dispersed graphene oxide was prepared by the improved Hummers method, which would be reduced to graphene with the reducing agent called hydrazine hydrate. The X-ray diffraction, Infrared spectroscopy, Raman spectra and Transmission electron microscopy were used to analysis the phase, morphology and structure of the graphene and graphene oxide. The results show that the graphene oxide and reduced graphene oxide prepared via this method, whose degree of oxidation and reduction are high; Also obtained a higher well-disperses and less structural imperfection of the graphene that was manufactured in the reducing system that added ammonia reduction

Electrophoretic preparation and characterization of porous electrodes from diamond nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Riveros, Lyda La Torre; Soto, Keyla; Tryk, Donald A; Cabrera, Carlos R [Department of Chemistry and Center of Nanoscale Materials, University of Puerto Rico, Rio Piedras, PO Box 23346 San Juan, PR 00931-3346 (Puerto Rico)

2007-04-15

We carried out chemical purification of commercially available diamond nanoparticles by refluxing in aqueous HNO{sub 3} and characterized the samples by spectroscopic and surface techniques before and after purification. As a first step in the preparation of electrodes for electrochemistry, we have electrophoretically deposited thin, highly uniform films of controlled thickness (1-8 {mu}m) on silicon substrates using the purified diamond nanoparticles. These have been characterized by scanning electron microscopy (SEM). All films obtained were homogeneous in thickness and without macroscopic holes or cracks. Such structures could also be used in many other applications such as fuel cells or lithium batteries. We have performed cyclic voltammetry experiments with these electrodes. The voltammograms of diamond nanoparticles electrophoretically deposited on silicon indicate hydrogen evolution. This demonstrates that the material is useful as electrocatalitic support. This conclusion is supported by the cyclic voltammograms obtained using ferrycyanide (III) chloride and hexaamineruthenium (III) chloride complexes as redox probes. However, these redox probes showed very small peak currents. This behavior could be improved by doping the diamond nanoparticles with an impurity such as boron.

Electrophoretic preparation and characterization of porous electrodes from diamond nanoparticles

International Nuclear Information System (INIS)

Riveros, Lyda La Torre; Soto, Keyla; Tryk, Donald A; Cabrera, Carlos R

2007-01-01

We carried out chemical purification of commercially available diamond nanoparticles by refluxing in aqueous HNO 3 and characterized the samples by spectroscopic and surface techniques before and after purification. As a first step in the preparation of electrodes for electrochemistry, we have electrophoretically deposited thin, highly uniform films of controlled thickness (1-8 μm) on silicon substrates using the purified diamond nanoparticles. These have been characterized by scanning electron microscopy (SEM). All films obtained were homogeneous in thickness and without macroscopic holes or cracks. Such structures could also be used in many other applications such as fuel cells or lithium batteries. We have performed cyclic voltammetry experiments with these electrodes. The voltammograms of diamond nanoparticles electrophoretically deposited on silicon indicate hydrogen evolution. This demonstrates that the material is useful as electrocatalitic support. This conclusion is supported by the cyclic voltammograms obtained using ferrycyanide (III) chloride and hexaamineruthenium (III) chloride complexes as redox probes. However, these redox probes showed very small peak currents. This behavior could be improved by doping the diamond nanoparticles with an impurity such as boron

Characterization with 3H-haloperidol of the dopamine receptor in the rat kidney particulate preparation

International Nuclear Information System (INIS)

Nakajima, Tohru; Kuruma, Isami

1980-01-01

The dopamine receptor of rat kidney particulate preparation was identified and characterized by the use of 3 H-haloperidol binding. Binding of 3 H-haloperidol to the kidney particulate preparation was slow and saturable. The dissociation constants (K sub(D)) were 0.41 nM and 5.88 nM, respectively, according to the model of two classes of independent binding sites. Maximal binding of high affinity site was obtained with 166 fmole/mg protein which was about 40% of the total receptor density. A wide variety of neuroleptics at specifically low concentrations in nanomolar range inhibited the 3 H-haloperidol binding. There was an excellent correlation between the affinity of numerous neuroleptics for the kidney particulate preparation and that for the brain striatum. (author)

Preparation and spectroscopic characterization of visible light sensitized N doped TiO2 (rutile)

International Nuclear Information System (INIS)

Livraghi, S.; Czoska, A.M.; Paganini, M.C.; Giamello, E.

2009-01-01

Nitrogen doped TiO 2 represents one of the most promising material for photocatalitic degradation of environmental pollutants with visible light. However, at present, a great deal of activity is devoted to the anatase polymorph while few data about rutile are available. In the present paper we report an experimental characterization of N doped polycrystalline rutile TiO 2 prepared via sol-gel synthesis. Nitrogen doping does not affect the valence band to conduction band separation but, generates intra band gap localized states which are responsible of the on set of visible light absorption. The intra band gap states correspond to a nitrogen containing defect similar but not coincident with that recently reported for N doped anatase. - Graphical abstract: Nitrogen doped TiO 2 represents one of the most promising material for photocatalitic degradation of environmental pollutants with visible light. However, at present, a great deal of activity is devoted to the anatase polymorph while few data about rutile are available. In the present paper we report an experimental characterization of N doped polycrystalline rutile TiO 2 prepared via sol-gel synthesis

EDTA modified glassy carbon electrode: Preparation and characterization

Energy Technology Data Exchange (ETDEWEB)

Ustuendag, Zafer [Dumlupinar University, Faculty of Arts and Sciences, Department of Chemistry, Kuetahya (Turkey); Solak, Ali Osman [Ankara University, Faculty of Science, Department of Chemistry, Degol Street, Tandogan, 06100 Ankara (Turkey)], E-mail: osolak@science.ankara.edu.tr

2009-11-01

EDTA-phenoxyamide modified glassy carbon electrode (EDTA-GC) was prepared at a glassy carbon electrode by surface synthesis. In the first step, nitrophenyl was grafted to the glassy carbon (GC) surface via the electrochemical reduction of its tetraflouroborate diazonium salt. In the second step, nitrophenyl-modified electrode (NP-GC) was subjected to the cathodic potential scan to reduce the nitro to amine group. p-Aminophenyl modified glassy carbon electrode (AP-GC) was dipped into a EDTA solution containing 1-ethyl-3(3-(dimethlyamino)propyl)-carbodiimide (EDC) as an activating agent. Thus formed ((2-anilino-2-oxoethyl){l_brace}2-[bis(carboxymethyl)amino]-ethyl{r_brace}amino)acetic acid modified GC electrode was denoted as EDTA-GC and characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), ellipsometry and X-ray photoelectron spectroscopy (XPS). Complexation of the EDTA-GC surface with Pb{sup 2+} ions was investigated if this electrode could be used as a metal sensor.

Preparation and Characterization of Lignin-based Membrane Material

Directory of Open Access Journals (Sweden)

Shuai Wang

2015-07-01

Full Text Available Lignin-based membrane material was prepared from lignosulfonate extracted from sulfite pulping. The effects of formaldehyde, polyvinyl alcohol (PVA, urea, borax, glutaraldehyde (GD, and dimethyl phthalate (DMP on tensile strength and water absorption were investigated. The experimental results showed that the optimum conditions were as follows: a reaction temperature of 85 °C, 22.22 wt.% lignosulfonate, 1.59 wt.% borax, 22.22 wt.% urea, 31.75 wt.% formaldehyde, 22.22 wt.% PVA, 32.32 wt.% GD (to PVA glue, and 32.32 wt.% DMP (to PVA glue. Under these conditions, the tensile strength reached 2.2 ×104 Pa and the water absorption was 35.2%. The products were characterized by Fourier transform infrared spectroscopy (FTIR and scanning electron microscopy (SEM. The results showed that the product components were compatible in this system, and the introduction of cross-linking agents may have resulted in a decrease in pore size.

Iodine-125 Chitosan-Vitamin C complex. Preparation, characterization and application

Energy Technology Data Exchange (ETDEWEB)

Elbarbary, Ahmed M. [National Center for Radiation Research and Technology, Cairo (Egypt). Polymer Chemistry Dept.; Shafik, H.M.; Ebeid, N.H.; Ayoub, S.M. [Atomic Energy Authority, Cairo (Egypt). Hot Lab. Center; Othman, Sameh H. [Atomic Energy Authority, Cairo (Egypt). Nuclear Research Center

2015-07-01

In heterogeneous conditions, water soluble Chitosan-Vitamin C Complex (CSVC) is successfully synthesized via the ionic interaction between γ-degraded CS and VC. Chitosan (CS) of low molecular weight (MW) is prepared using γ-irradiation method. The coupling of CS and vitamin C (VC) is carried out by the chemical treatment of VC with the γ-degraded CS. The formation of CSVC complex instead of physical mixture is confirmed by FT-IR and UV spectrometry. Characterization by transmission electron microscope (TEM) and dynamic light scattering (DLS) shows the formation of a nanostructure in 40 nm range. The preparation of labeled CSVC was performed using chloramines-T oxidation method. The labeling feasibility of CSVC nanostructure by Iodine-125 ({sup 125}I) is investigated. The optimized conditions of labeling are thought to be 50 μg of oxidizing agent, pH 3, and one minute reaction time. The Biodistribution activity of {sup 125}I radiolabeled CSVC nanostructure ({sup 125}I-CSVC) is examined on a group of different ascites tumor bearing mice. Calculation of the biodistribution percentages shows that the tumor, liver, and kidney are the targeting organs of {sup 125}I-CSVC nanostructure.

Iodine-125 Chitosan-Vitamin C complex. Preparation, characterization and application

International Nuclear Information System (INIS)

Elbarbary, Ahmed M.; Shafik, H.M.; Ebeid, N.H.; Ayoub, S.M.; Othman, Sameh H.

2015-01-01

In heterogeneous conditions, water soluble Chitosan-Vitamin C Complex (CSVC) is successfully synthesized via the ionic interaction between γ-degraded CS and VC. Chitosan (CS) of low molecular weight (MW) is prepared using γ-irradiation method. The coupling of CS and vitamin C (VC) is carried out by the chemical treatment of VC with the γ-degraded CS. The formation of CSVC complex instead of physical mixture is confirmed by FT-IR and UV spectrometry. Characterization by transmission electron microscope (TEM) and dynamic light scattering (DLS) shows the formation of a nanostructure in 40 nm range. The preparation of labeled CSVC was performed using chloramines-T oxidation method. The labeling feasibility of CSVC nanostructure by Iodine-125 ( 125 I) is investigated. The optimized conditions of labeling are thought to be 50 μg of oxidizing agent, pH 3, and one minute reaction time. The Biodistribution activity of 125 I radiolabeled CSVC nanostructure ( 125 I-CSVC) is examined on a group of different ascites tumor bearing mice. Calculation of the biodistribution percentages shows that the tumor, liver, and kidney are the targeting organs of 125 I-CSVC nanostructure.

Preparation and characterization of 1,6 anhydrous Β-D-Glucopyranose from starch

International Nuclear Information System (INIS)

Alvarez Lopez, M.S.

1991-01-01

In order to prepare 2-deoxi-2-fluoride-D-glucosa (2FDG) in an inert form there are several synthesis methods, but the more interesting one for our study is based in a reaction from the 1,6 anhydrous, Β-D-glucopyranose (1,6AGP), in an attempt to compare the labelling efficiency rate of 2FDG with F-18, which is highly used in nuclear medicine. In the present paper the attainment of starch from white potatoe, infrared analysis of this starch and fusion point are included. Also results are compared with an analytical reactive standard. The process of preparation of 1,6AGP by pyrolysis of starch under reduced pressure, its separation and purification by crystallization and infrared characterization of 1,6AGP, nuclear magnetic resonance and mass spectrometry are also included. 10 kg. of potatoes were used, and 93059 g. ±5.8 of starch with an efficiency rate of 9.32 ±0.631; fusion point was 272 o C and there was a 9.83 ± 1.48 % of humidity. After the pyrolysis, crystallization an purification processes, 1.71 ±0.54 % of 1,6AGP were obtained. Later results of compound characterization, nuclear magnetic resonance, infrared and mass spectrometry were compared with a commercial product and it was proved that it corresponds to such pure compound. (Author)

A Complicated Case of Tacrolimus-Induced Rapid Remission after Cesarean Section in the Early Third Trimester for Refractory Severe Ulcerative Colitis Flaring in the Initial Period of Gestation

Directory of Open Access Journals (Sweden)

Takashi Mizushima

2011-04-01

Full Text Available A 36-year-old woman who had been diagnosed with ulcerative colitis at the age of 17 years was referred to our hospital because of severe abdominal pain and repeated bloody diarrhea that persisted during pregnancy despite combination therapy with high-dose corticosteroids and weekly granulocyte and monocyte adsorptive apheresis (GMA. She underwent combination therapy consisting of high-dose corticosteroids, intensive GMA (two sessions per week and vancomycin, which was used to eradicate Clostridium difficile, under total parenteral nutrition control until the estimated weight of her fetus reached 1,000 g. This combination therapy was partially successful, resulting in almost complete disappearance of abdominal pain and a marked decrease in stool frequency. However bloody diarrhea persisted and the patient developed anemia and hypoalbuminemia and was unable to prolong her gestation time. Cesarean section was conducted at 28 weeks of gestation without any congenital abnormalities or neurological defects. Oral administration of tacrolimus was begun 7 days after cesarean section, which was followed by rapid induction of remission. Corticosteroids were then gradually tapered off. Tacrolimus is one therapeutic option after cesarean section in pregnant patients who do not respond well to GMA and high-dose corticosteroids for persistent active ulcerative colitis.

Neutron/gamma pulse shape discrimination in plastic scintillators: Preparation and characterization of various compositions

International Nuclear Information System (INIS)

Blanc, Pauline; Hamel, Matthieu; Dehé-Pittance, Chrystèle; Rocha, Licinio; Pansu, Robert B.; Normand, Stéphane

2014-01-01

This work deals with the preparation and evaluation of plastic scintillators for neutron/gamma pulse shape discrimination (PSD). We succeeded in developing a plastic scintillator with good neutron/gamma discrimination properties in the range of what is already being commercialized. Several combinations of primary and secondary fluorophores were implemented in chemically modified polymers. These scintillators were fully characterized by fluorescence spectroscopy and under neutron irradiation. The materials proved to be stable for up to 5 years without any degradation of PSD properties. They were then classified in terms of their PSD capabilities and light yield. Our best candidate, 28.6 wt% of primary fluorophore with a small amount of secondary fluorophore, shows promising PSD results and is particularly suited to industrial development, because its preparation does not involve the use of expensive or exotic compounds. Furthermore, even at the highest prepared concentration, high stability over time was observed. As a proof of concept, one sample with dimensions 109 mm ∅×114 mm height (≈1 L) was prepared

Neutron/gamma pulse shape discrimination in plastic scintillators: Preparation and characterization of various compositions

Energy Technology Data Exchange (ETDEWEB)

Blanc, Pauline [CEA, LIST, Laboratoire Capteurs et Architectures Électroniques, F-91191 Gif-sur-Yvette (France); Laboratoire de Photophysique et Photochimie Supramoléculaires et Macromoléculaires (CNRS UMR 8531), École Normale Supérieure de Cachan, 61 Avenue du Président Wilson, F-94235 Cachan cedex (France); Hamel, Matthieu, E-mail: matthieu.hamel@cea.fr [CEA, LIST, Laboratoire Capteurs et Architectures Électroniques, F-91191 Gif-sur-Yvette (France); Dehé-Pittance, Chrystèle; Rocha, Licinio [CEA, LIST, Laboratoire Capteurs et Architectures Électroniques, F-91191 Gif-sur-Yvette (France); Pansu, Robert B. [Laboratoire de Photophysique et Photochimie Supramoléculaires et Macromoléculaires (CNRS UMR 8531), École Normale Supérieure de Cachan, 61 Avenue du Président Wilson, F-94235 Cachan cedex (France); Normand, Stéphane [CEA, LIST, Laboratoire Capteurs et Architectures Électroniques, F-91191 Gif-sur-Yvette (France)

2014-06-01

This work deals with the preparation and evaluation of plastic scintillators for neutron/gamma pulse shape discrimination (PSD). We succeeded in developing a plastic scintillator with good neutron/gamma discrimination properties in the range of what is already being commercialized. Several combinations of primary and secondary fluorophores were implemented in chemically modified polymers. These scintillators were fully characterized by fluorescence spectroscopy and under neutron irradiation. The materials proved to be stable for up to 5 years without any degradation of PSD properties. They were then classified in terms of their PSD capabilities and light yield. Our best candidate, 28.6 wt% of primary fluorophore with a small amount of secondary fluorophore, shows promising PSD results and is particularly suited to industrial development, because its preparation does not involve the use of expensive or exotic compounds. Furthermore, even at the highest prepared concentration, high stability over time was observed. As a proof of concept, one sample with dimensions 109 mm ∅×114 mm height (≈1 L) was prepared.

Preparation, characterization, and in vitro release study of albendazole-encapsulated nanosize liposomes

Science.gov (United States)

Panwar, Preety; Pandey, Bhumika; Lakhera, P C; Singh, K P

2010-01-01

The purpose of the present study was to formulate effective and controlled release albendazole liposomal formulations. Albendazole, a hydrophobic drug used for the treatment of hydatid cysts, was encapsulated in nanosize liposomes. Rapid evaporation method was used for the preparation of albendazole-encapsulated conventional and PEGylated liposomes consisting of egg phosphatidylcholine (PC) and cholesterol (CH) in the molar ratios of (6:4) and PC:CH: polyethylene glycol (PEG) (5:4:1), respectively. In this study, PEGylated and conventional liposomes containing albendazole were prepared and their characteristics, such as particle size, encapsulation efficiency, and in vitro drug release were investigated. The drug encapsulation efficiency of PEGylated and conventional liposomes was 81% and 72%, respectively. The biophysical characterization of both conventional and PEG-coated liposomes were done by transmission electron microscopy and UV-vis spectrophotometry. Efforts were made to study in vitro release of albendazole. The drug release rate showed decrease in albendazole release in descending order: free albendazole, albendazole-loaded conventional liposomes, and least with albendazole-loaded PEG-liposomes. Biologically relevant vesicles were prepared and in vitro release of liposome-entrapped albendazole was determined. PMID:20309396

Preparation, characterization and optical properties of Lanthanum-(nanometer MCM-41) composite materials

International Nuclear Information System (INIS)

Zhai, Q. Z.; Wang, P.

2008-01-01

Nanometer MCM-41 molecular sieve was prepared under a base condition by using cetyltrimethylammonium bromide as template and tetraethyl orthosilicate as silica source by means of hydrothermal method. Lanthanum(III) was incorporated into the nanometer MCM-41 by a liquid phase grafting method. The prepared nano composite materials were characterized by means of powder X-ray diffraction, spectrophotometric analysis, Fourier transform infrared spectroscopy, low temperature nitrogen adsorption-desorption technique, solid diffuse reflectance absorption spectra and luminescence. The powder X-ray diffraction studies show that the nanometer MCM-41 molecular sieve is successfully prepared. The highly ordered meso porous two-dimensional hexagonal channel structure and framework of the support MCM-41 is retained intact in the prepared composite material La-(nanometer MCM-41). The spectrophotometric analysis indicates that lanthanum exists in the prepared nano composite materials. The Fourier transform infrared spectra indicate that the framework of the MCM-41 molecular sieve still remains in the prepared nano composite materials and some framework vibration peaks show blue shifts relative to those of the MCM-41 molecular sieve. The low temperature nitrogen adsorption-desorption indicates that the guest locales in the channel of the molecular sieve. Compared with bulk lanthanum oxide, the guest in the channel of the molecular sieve has smaller particle size and shows a significant blue shift of optical absorption band in solid diffuse reflectance absorption spectra. The observed blue shift in the solid state diffuse reflectance absorption spectra of the lanthanum-(nanometer MCM-41) sample show the obvious stereoscopic confinement effect of the channel of the host on the guest, which further indicates the successful encapsulation of the guest in the host. The La-(nanometer MCM-41) sample shows luminescence

Preparation, characterization and optical properties of Gadolinium doped ceria thin films by pulsed laser deposition technique

International Nuclear Information System (INIS)

Nagaraju, P.; Vijaya Kumar, Y.; Vishnuvardhan Reddy, C.; Ramana Reddy, M.V.; Phase, D.M; Raghavendra Reddy, V.

2013-01-01

The growth of Gadolinium doped ceria thin films with controlled surface structure for device quality applications presents a significant problem for experimental investigation. In the present study gadolinium doped cerium oxide thin films were prepared by pulsed laser deposition (PLD) and were studied for their surface structure evaluation in relation to the optimized operating conditions during the stage of film preparation. The deposition was made with gadolinium concentration of 10 mole% to ceria pellets. The films were deposited on quartz substrate in the presence of oxygen partial pressure of 1.5 x 10 -3 torr using KrF Excimer laser with laser energy 220 mJ at a substrate temperature 700℃. The effect of annealing temperature on 10 mole% GDC thin film was investigated. The film thickness was measured by using AMBIOS make XP-l stylus profiler. As prepared and annealed thin films were characterized for crystallinity, particle size and orientation by using G.I.XRD. The films were characterized using atomic force microscopy (AFM). The AFM results gave a consistent picture of the evolution of GDC film surface morphologies and microstructures in terms of surface roughness, grain distribution and mean grain size. The optical transmittance spectra was used to determine the optical constants such as optical band gap, refractive index, extinction coefficient of as prepared and annealed thin films. (author)

Kombucha-synthesized bacterial cellulose: preparation, characterization, and biocompatibility evaluation.

Science.gov (United States)

Zhu, Changlai; Li, Feng; Zhou, Xinyang; Lin, Lin; Zhang, Tianyi

2014-05-01

Bacterial cellulose (BC) is a natural biomaterial with unique properties suitable for tissue engineering applications, but it has not yet been used for preparing nerve conduits to repair peripheral nerve injuries. The objectives of this study were to prepare and characterize the Kampuchea-synthesized bacterial cellulose (KBC) and further evaluate the biocompatibility of KBC with peripheral nerve cells and tissues in vitro and in vivo. KBC membranes were composed of interwoven ribbons of about 20-100 nm in width, and had a high purity and the same crystallinity as that of cellulose Iα. The results from light and scanning electron microscopy, MTT assay, flow cytometry, and RT-PCR indicated that no significant differences in the morphology and cell function were observed between Schwann cells (SCs) cultured on KBC membranes and glass slips. We also fabricated a nerve conduit using KBC, which was implanted into the spatium intermusculare of rats. At 1, 3, and 6 weeks post-implantation, clinical chemistry and histochemistry showed that there were no significant differences in blood counts, serum biochemical parameters, and tissue reactions between implanted rats and sham-operated rats. Collectively, our data indicated that KBC possessed good biocompatibility with primary cultured SCs and KBC did not exert hematological and histological toxic effects on nerve tissues in vivo. Copyright © 2013 Wiley Periodicals, Inc.

Electrically conducting perovskites for SOFC and catalysis. Preparation characterization and testing

Energy Technology Data Exchange (ETDEWEB)

Gordes, P

1998-12-31

Solid oxide fuel cells offer the possibility of high efficiency and low pollution energy source. A fuel cell converts chemical energy directly to electricity without combustion as an intermediate step. H{sub 2}, CO or hydrocarbons can be used as fuel gas. At present the main problems in developing a commercial SOFC are related to the air electrode and interconnect. Commercial air electrode and interconnect materials are still not on the market. This dissertation concerns the following main tasks: 1. A theoretical part on the co-optimization of electronic and catalytic properties of perovskites (ABO{sub 3}) where the A position is occupied by mixed rare earth or alkaline earth metal (Ca, Sr, Ba, La, etc) and the B position is occupied by a mixture of transition metals (Mn, Fe, Co, Ni, Cr, etc). 2. Optimization of the drip pyrolysis method and fabrication of high quality perovskite powders of selected compositions for further studies. This work involves a detailed characterization of powders prepared in terms of phase homogeneity, crystallite size, agglomeration, chemical composition etc. 3. Development of the necessary processing technology for fabrication of shaped samples with a closely controlled porosity and pore size distribution. This work involves development of a suitable shaping process (uniaxial pressing, extrusion, tape casting), and a detailed study of the phase evolution and densification properties of the powders as a function of temperature. 4. Characterization of the prepared perovskite components in terms of phase homogeneity, microstructure, as well as electrical and catalytic properties. 5. Recommendations for future work. (EG) 151 refs.

Electrically conducting perovskites for SOFC and catalysis. Preparation characterization and testing

Energy Technology Data Exchange (ETDEWEB)

Gordes, P.

1997-12-31

Solid oxide fuel cells offer the possibility of high efficiency and low pollution energy source. A fuel cell converts chemical energy directly to electricity without combustion as an intermediate step. H{sub 2}, CO or hydrocarbons can be used as fuel gas. At present the main problems in developing a commercial SOFC are related to the air electrode and interconnect. Commercial air electrode and interconnect materials are still not on the market. This dissertation concerns the following main tasks: 1. A theoretical part on the co-optimization of electronic and catalytic properties of perovskites (ABO{sub 3}) where the A position is occupied by mixed rare earth or alkaline earth metal (Ca, Sr, Ba, La, etc) and the B position is occupied by a mixture of transition metals (Mn, Fe, Co, Ni, Cr, etc). 2. Optimization of the drip pyrolysis method and fabrication of high quality perovskite powders of selected compositions for further studies. This work involves a detailed characterization of powders prepared in terms of phase homogeneity, crystallite size, agglomeration, chemical composition etc. 3. Development of the necessary processing technology for fabrication of shaped samples with a closely controlled porosity and pore size distribution. This work involves development of a suitable shaping process (uniaxial pressing, extrusion, tape casting), and a detailed study of the phase evolution and densification properties of the powders as a function of temperature. 4. Characterization of the prepared perovskite components in terms of phase homogeneity, microstructure, as well as electrical and catalytic properties. 5. Recommendations for future work. (EG) 151 refs.

Cholesterol-imprinted macroporous monoliths: Preparation and characterization.

Science.gov (United States)

Stepanova, Mariia А; Kinziabulatova, Lilia R; Nikitina, Anna A; Korzhikova-Vlakh, Evgenia G; Tennikova, Tatiana B

2017-11-01

The development of sorbents for selective binding of cholesterol, which is a risk factor for cardiovascular disease, has a great importance for analytical science and medicine. In this work, two series of macroporous cholesterol-imprinted monolithic sorbents differing in the composition of functional monomers (methacrylic acid, butyl methacrylate, 2-hydroxyethyl methacrylate and ethylene dimethacrylate), amount of a template (4, 6 and 8 mol%) used for molecular imprinting, as well as mean pore size were synthesized by in situ free-radical process in stainless steel housing of 50 mm × 4.6 mm i.d. All prepared materials were characterized regarding to their hydrodynamic permeability and porous properties, as well as examined by BET and SEM methods. Imprinting factors, apparent dynamic dissociation constants, the maximum binding capacity, the number of theoretical plates and the height equivalent to a theoretical palate of MIP monoliths at different mobile phase flow rates were determined. The separation of a mixture of structural analogues, namely, cholesterol and prednisolone, was demonstrated. Additionally, the possibility of using the developed monoliths for cholesterol solid-phase extraction from simulated biological solution was shown. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Preparation and Characterization of Silica/Polyamide-imide Nanocomposite Thin Films

Directory of Open Access Journals (Sweden)

Hwang Jong-Sun

2010-01-01

Full Text Available Abstract The functional silica/polyamide-imide composite films were prepared via simple ultrasonic blending, after the silica nanoparticles were modified by cationic surfactant—cetyltrimethyl ammonium bromide (CTAB. The composite films were characterized by scanning electron microscope (SEM, thermo gravimetric analysis (TGA and thermomechanical analysis (TMA. CTAB-modified silica nanoparticles were well dispersed in the polyamide-imide matrix, and the amount of silica nanoparticles to PAI was investigated to be from 2 to 10 wt%. Especially, the coefficients of thermal expansion (CET continuously decreased with the amount of silica particles increasing. The high thermal stability and low coefficient of thermal expansion showed that the nanocomposite films can be widely used in the enamel wire industry.

Characterization and Preparation of Broken Rice Proteins Modified by Proteases

Directory of Open Access Journals (Sweden)

Lixia Hou

2010-01-01

Full Text Available Broken rice is an underutilized by-product of milling. Proteins prepared from broken rice by treatments with alkaline protease and papain have been characterized with regard to nutritional and functional properties. The protein content and the protein recovery were 56.45 and 75.45 % for alkaline protease treatment, and 65.45 and 46.32 % for papain treatment, respectively. Protease treatment increased the lysine and valine content, leading to a more balanced amino acid profile. Broken rice proteins had high emulsifying capacity, 58.3–71.6 % at neutral pH, and adequate water holding capacity, ranging from 1.96 to 2.93 g/g of proteins. At pH=7.0, the broken rice protein had the highest water holding capacity and the best interfacial activities (emulsifying capacity, emulsifying stability, foaming capacity and foaming stability, which may be the result of the higher solubility at pH=7.0. The interfacial activities increased with the increase in the mass fraction of broken rice proteins. The proteins prepared by the papain treatment had higher water holding capacity (p>0.05, emulsifying capacity (p0.05 than alkaline protease treatment at the same pH or mass fraction. To test the fortification of food products with broken rice proteins, pork sausages containing the proteins were prepared. Higher yield of the sausages was obtained with the increased content of broken rice proteins, in the range of 2.0–9.0 %. The results indicate that broken rice proteins have potential to be used as the protein fortification ingredient for food products.

Preparation and characterization of nano hydroxyapatite/polymeric composites materials. Part I

Energy Technology Data Exchange (ETDEWEB)

Mohamed, Khaled R., E-mail: kh_rezk1966@yahoo.com [Biomaterials Dept., National Research Centre, Dokki, Cairo (Egypt); El-Rashidy, Zenab M. [Biomaterials Dept., National Research Centre, Dokki, Cairo (Egypt); Salama, Aida A. [Biophysics Dept., Faulty of Science, El-Azhar Univ., Cairo (Egypt)

2011-10-17

Highlights: {yields} The formation and coating of CHA increased by increasing polymer content. {yields} The size of the prepared CHA was within nano-range scale. {yields} The composites had homogeneity and CHA formed within the polymeric matrix. - Abstract: The present study is focused on preparation of nano composite materials and the effect of citric acid on their different properties. The formation of nano HA and its interaction with chitosan (C), gelatin (G) polymers and citric acid (CA) materials were studied. The Fourier Transformed Infrared Spectroscopy (FT-IR), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), transmission electron microscope (TEM), and scanning electron microscope (SEM) were used to characterize these composite materials. The compressive strength (CS) was also measured to know the reinforcement of the prepared composites. The results show that carboxylic and amino groups play crucial role for HA formation on chitosan-gelatin polymeric matrix in the presence of citric acid (CA). The formation of nano HA particles and its average size of crystallite is increased with increase of CG content and decreased with addition of CA. Also, the HA formation and binding strength between its particles are improved into the composites especially with CA. The nano-composites containing the best ratio of nHA (70%) with CA (0.2 M) are promising for medical applications in the future.

Preparation and Characterization of High Silica Molecular Sieve from Rice Husk

International Nuclear Information System (INIS)

Hnaung Hnaung Win; Tin Tin Aye; Kyaw Myo Naing; Nyunt Wynn

2008-03-01

A mordenite type of hight silica molecular sieve with a formula composition Na32 (ALO2)32 (SiO2)176 192H2O having a high molar ratio of SiO2 /Al2O3 (5.4) with a percent yield of 98.76% has been prepared from synthesized zeolite NaY and glycolato silicate on the basis of hydrothermal condition.Zeolicate NaY and glycolato silicate were synthesized by using 98.34% purified silica which was extracted from rice husk.The characterizations with XRD, FT-IR, EDXRF,TG-DTA and SEM techniques were studied.

Preparation and characterization of ZnTe thin films by SILAR method

International Nuclear Information System (INIS)

Kale, S.S.; Mane, R.S.; Pathan, H.M.; Shaikh, A.V.; Joo, Oh-Shim; Han, Sung-Hwan

2007-01-01

Nanocrystalline zinc telluride (ZnTe) thin films were prepared by using successive ionic layer adsorption and reaction (SILAR) method from aqueous solutions of zinc sulfate and sodium telluride. The films were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis and optical absorption measurement techniques. The synthesized ZnTe thin films were nanocrystalline with densely aggregated particles in nanometer scale and were free from the voids or cracks. The optical band gap energy of the film was found to be thickness dependent. The elemental chemical compositional stoichiometric analysis revealed good Zn:Te elemental ratio of 53:47

Helical polyurethane-attapulgite nanocomposite: Preparation, characterization and study of optical activity

International Nuclear Information System (INIS)

Wang Zhiqiang; Zhou Yuming; Sun Yanqing; Fan Kai; Guo Xingxing; Jiang Xiaolei

2009-01-01

Helical polyurethane-attapulgite (BM-ATT) based on R-1,1'-binaphthyl-2',2-diol (R-BINOL) composite was prepared after the surface modification of attapulgite (ATT). BM-ATT was characterized by Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HTEM) and vibrational circular dichroism (VCD) spectroscopy. FT-IR and XRD analyses indicate that the helical polyurethane has been successfully grafted onto the surfaces of the modified ATT without destroying the original crystalline structure of ATT. BM-ATT exhibits the rod-like structure by SEM, TEM, and HTEM photographs. BM-ATT displays obvious Cotton effect for some absorbance in VCD spectrum, and its optical activity results from the singlehanded conformation of helical polyurethane. - Graphical Abstract: Helical polyurethane-attapulgite (BM-ATT) based on R-1,1'-binaphthyl-2',2-diol (R-BINOL) nanocomposite was prepared after surface modification of attapulgite (ATT). This rod-like composite is coated by the optically active polyurethane shell on the surfaces.

Preparation and characterization of bioglass/polyvinyl alcohol composite hydrogel

International Nuclear Information System (INIS)

Xu Hong; Wang Yingjun; Zheng Yudong; Chen Xiaofeng; Ren Li; Wu Gang; Huang Xiaoshan

2007-01-01

In order to form firm active fixation with the adjacent bone, a new kind of bioactive composite hydrogel was prepared with polyvinyl alcohol (PVA) and bioglass (BG) through ultrasonic dispersion, heat-high-pressure and freeze/thawed technique. A digital speckle correlation method (DSCM) was utilized to characterize the mechanical properties of the series of BG/PVA composites. Results showed that at different load pressures, the composite hydrogel displayed different displacement and deformation in the V field. Results also showed that an increase of PVA percentage (15-30 wt%) or of bioglass percentage (2-10 wt%) in composite hydrogel could lead to an increase in the elastic compression modulus. Scanning electron microscope results indicated that bioglass was uniformly dispersed in the BG/PVA composite hydrogel. The BG/PVA composite hydrogel shows a promising prospect as a new bionic cartilage implantation material

Polyaniline nanocomposites via in situ emulsion polymerization based on montmorillonite: Preparation and characterization

Directory of Open Access Journals (Sweden)

M.A. Abd El-Ghaffar

2015-11-01

Full Text Available Polyaniline nanocomposites were prepared via in situ emulsion polymerization in the presence of Na+ montmorillonite (Na+MMT. For achieving this purpose the clay was organophilized to (MMT-CTA form using cetyltrimethyl ammonium bromide (CTAB. The X-ray diffraction (XRD demonstrated that the basal space of Na+-montmorillonite increased after the organophilization from 11.21 to 19.35 Å. Polyaniline/montmorillonite (PAn/MMT nanocomposites were prepared by intercalating the emulsion of aniline monomer with treated organically layers of (Na+-MMT using ammonium peroxydisulfate (APS as an initiator. Furthermore aniline hydrochloride (AnHCl was used as a modifier and monomer to prepare PAn/H+MMT nanocomposites by cation exchange of the anilinuim moiety with the sodium ion inside the basal spaces which enlarged after the polymerization process to 35 Å as evidenced from X-ray diffraction (XRD. The d-spacing of the PAn/H+-MMT nanocomposite was found to become wider about 23.79 Å than that of the pure Na+-MMT, and successful intercalation or exfoliation of PAnH+ into Na+-MMT layers. The prepared PAn/MMT nanocomposites were characterized by thermal gravimetric analysis (TGA, scanning electron microscope (SEM, and transmission electron microscope (TEM. The electrical property measurements showed an enhancement in the conductivity values of the prepared nanocomposites especially on using AnHCl monomer to be in the order of 10−1 S/cm.

Preparation and characterization of Yttrium-Aluminium garnet (Y3Al5O12)

International Nuclear Information System (INIS)

Ruzicka, J.; Niznansky, D.; Houzvicka, J.; Nikl, M.; Cerny, R.

2009-01-01

This work deals with the preparation of powders and transparent yttrium aluminium garnet (Y 3 Al 5 O 12 - YAG) from nanopowders. Stoichiometric amounts of nanocrystalline Al 2 O 3 and Y 2 O 3 were mixed and chemically pretreated using different basic agents and using ultrasonic bath. Resulting mixture was dried, pressed and heated up to 1750°C. Final material was characterized by X-ray diffraction, DTA and optical and electron microscopy

Preparation and characterization of corn reinforced polymer sheet of fibers

International Nuclear Information System (INIS)

Moreira, Tatiana Martinez; Seo, Emilia Satoshi Miyamaru

2016-01-01

There is a global trend in seeking plant fibers to replace the synthetic fibers to obtain reinforced composites aimed at the use of renewable resources. In this context, this paper aims to develop the process of preparing maize leaf fibers, characterizing them and adapting them for applications in the construction industry and develop a reinforced polymer composite with these fibers. Corn leaves were dried in environmental temperature, treated by mercerizing, then neutralized with acid solution and washed in running water. The characterization of the corn leaf fibers was carried out by X-ray diffraction, X-ray fluorescence, scanning electron microscopy, specific surface area, thermogravimetry and specific mass. The mercerizing treatment was effective, because the maize fibers have characteristics similar to synthetic fibers, leading to a possibility of new technological uses. The polymeric composite material was developed by extrusion processes and injection and tested for tensile testing, differential scanning calorimetry and scanning electron microscopy, thus reused an organic waste that would be disposed of by inserting it in a technological process, contributing to the research and development of new polymeric materials as well as to reduce waste discarded as scrap. (author)

Preparation and electrochemical characterization of MnOOH nanowire-graphene oxide

International Nuclear Information System (INIS)

Wang Lin; Wang Dianlong

2011-01-01

Highlights: → MnOOH nanowire-graphene oxide composites are prepared by hydrothermal reaction in distilled water or 5% ammonia aqueous solution at 130 deg. C, with MnO 2 -graphene oxide composites which are synthesized by a redox reaction between KMnO 4 and graphene oxide. → MnO 2 is deoxidized to MnOOH on graphene oxide through hydrothermal reaction without any extra reductants. → It is found that the electrochemical resistance of MnOOH nanowire-graphene oxide composites decreases and the capacitance increases to 76 F g -1 when hydrothermal reaction is conducted in ammonia aqueous solution. → MnOOH nanowire-graphene oxide composites prepared by hydrothermal reaction in 5% ammonia aqueous solution have excellent capacitance retention ratio at scan rate from 5 mV s -1 to 40 mV s -1 . - Abstract: MnOOH nanowire-graphene oxide composites are prepared by hydrothermal reaction in distilled water or 5% ammonia aqueous solution at 130 deg. C with MnO 2 -graphene oxide composites which are synthesized by a redox reaction between KMnO 4 and graphene oxide. Powder X-ray diffraction (XRD) analyses and energy dispersive X-ray analyses (EDAX) show MnO 2 is deoxidized to MnOOH on graphene oxide through hydrothermal reaction without any extra reductants. The electrochemical capacitance of MnOOH nanowire-graphene oxide composites prepared in 5% ammonia aqueous solution is 76 F g -1 at current density of 0.1 A g -1 . Moreover, electrochemical impedance spectroscopy (EIS) suggests the electrochemical resistance of MnOOH nanowire-graphene oxide composites is reduced when hydrothermal reaction is conducted in ammonia aqueous solution. The relationship between the electrochemical capacitance and the structure of MnOOH nanowire-graphene oxide composites is characterized by cyclic voltammetry (CV) and field emission scanning electron microscopy (FESEM). The results indicate the electrochemical performance of MnOOH nanowire-graphene oxide composites strongly depends on their

Preparation and characterization of polymeric and lipid nanoparticles of pilocarpine HCl for ocular application.

Science.gov (United States)

Lütfi, Genç; Müzeyyen, Demirel

2013-01-01

Pilocarpine is used topically in the treatment of glaucoma. Various studies were performed to improve the bioavailability and prolong the residence time of drugs in ocular drug delivery. Drug loaded polymeric and lipid nanoparticles offer several favourable biological properties, such as biodegradability, nontoxicity, biocompatibility and mucoadhesiveness. Therefore, preparing positively-charged pilocarpine HCl-loaded polymeric and lipid nanoparticles was the purpose of this study. Nanoparticles were prepared by quasi-emulsion solvent evaporation technique. The non-biodegradable positively-charged polymer Eudragit(®) RS 100 and semi-solid lipid excipient Gelucire(®) 44/14 were used as a vehicle, the cationic lipid octadecylamine was used as a cationic agent. The formulations were evaluated in terms of particle size, size distribution, zeta potential measurement, thermal behavior (Differential Scanning Calorimetry DSC), entrapment efficacy and pH. Characterizations of nanoparticles were analyzed during the storage period of 6 months for stability tests. Polymeric and lipid nanoparticles could be prepared successfully promising their use for ophthalmic delivery.

Characterization of fermented seaweed sauce prepared from nori (Pyropia yezoensis).

Science.gov (United States)

Uchida, Motoharu; Kurushima, Hirotaka; Ishihara, Kenji; Murata, Yuko; Touhata, Ken; Ishida, Noriko; Niwa, Kentaro; Araki, Toshiyoshi

2017-03-01

High-salt content seaweed sauces were prepared for the first time using nori (Pyropia yezoensis) by fermentation and characterized. Components and taste of the two nori sauces (NSs) prepared separately were compared with those of soy and fish sauces. The NSs were rich in total nitrogen compounds (1.5 g N/100 ml on average) and potassium (880 mg/100 g), and had a unique free amino acid composition (e.g., taurine 617 mg/100 g), explaining their unique taste as evaluated by a taste sensing system. As for their food function, inhibitory activity of angiotensin-converting enzyme was observed. As for their food safety, arsenic was detected at a 0.8 mg/100 g level in total, but inorganic arsenic was not detected (<0.05 mg/100 g) and not regarded as a problem. Allergy-causing substances contained in wheat, soy beans, and crustaceans were not detected (<0.1 mg/100 g) with NSs. These results suggest that the nori sauce has a high potential as a novel nutritional source for humans. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Characterization of amylose nanoparticles prepared via nanoprecipitation: Influence of chain length distribution.

Science.gov (United States)

Chang, Yanjiao; Yang, Jingde; Ren, Lili; Zhou, Jiang

2018-08-15

The influence of chain length distribution of amylose on size and structure of the amylose nanoparticles (ANPs) prepared through nanoprecipitation was investigated. Amylose with different chain length distributions was obtained by β-amylase treating amylose paste for different times and measured by size exclusion chromatography (SEC) and fluorophore-assisted carbohydrate electrophoresis (FACE). ANPs prepared via precipitation were characterized by using dynamic light scattering (DLS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). Results showed that the β-amylase treatments led to decrease in chain length of amylose, and it was the most important factor affecting size of ANPs. When hydrolysis degree of amylose was 52.8%, mean size of ANPs decreased from 206.4 nm to 102.7 nm. All the ANPs displayed a V-type crystalline structure and the effect of amylose chain length on crystallinity of the precipitated ANPs was negligible in the investigated range. Copyright © 2018 Elsevier Ltd. All rights reserved.

Synthesis and characterization of lead oxides for preparation of nanocomposites with polyamide

International Nuclear Information System (INIS)

Cado, Ronan Gorski; Severo, Vinicius A.; Bulhores, Luis Otavio S.

2016-01-01

Lead oxide nanoparticles with diameters between 100 to 250 nm were obtained using a polymeric precursor method in the presence of citric acid and ethylene glycol. X-ray diffraction (XRD) and dynamic light scattering to measure the size and zeta potential in solution in dispersions with different pH were used to characterize the as-obtained samples. The nanoparticles were incorporated into polyamide 6.6 and composite films were prepared by electrospinning being evaluated the variation of the mechanical properties of the polymer and its effectiveness in attenuation of X-rays. (author)

Characterization with /sup 3/H-haloperidol of the dopamine receptor in the rat kidney particulate preparation

Energy Technology Data Exchange (ETDEWEB)

Nakajima, T; Kuruma, I [Nippon Roche Research Center, Kanagawa (Japan)

1980-12-01

The dopamine receptor of rat kidney particulate preparation was identified and characterized by the use of /sup 3/H-haloperidol binding. Binding of /sup 3/H-haloperidol to the kidney particulate preparation was slow and saturable. The dissociation constants (K sub(D)) were 0.41 nM and 5.88 nM, respectively, according to the model of two classes of independent binding sites. Maximal binding of high affinity site was obtained with 166 fmole/mg protein which was about 40% of the total receptor density. A wide variety of neuroleptics at specifically low concentrations in nanomolar range inhibited the /sup 3/H-haloperidol binding. There was an excellent correlation between the affinity of numerous neuroleptics for the kidney particulate preparation and that for the brain striatum.

Preparation and characterization of etoricoxib solid dispersions using lipid carriers by spray drying technique

OpenAIRE

Chauhan, Bhaskar; Shimpi, Shyam; Paradkar, Anant

2005-01-01

The basic objectives of this study were to prepare and characterize solid dispersions of poorly water-soluble drug etoricoxib using lipid carriers by spray drying technique. The properties of solid dispersions were studied by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), differential scanning calorimetry (DSC), hotstage microscopy (HSM), radiograph powder diffraction (XRPD), and dissolution studies. The absence of etoricoxib peaks in XRPD profiles of solid dispersions ...

Absorption of protamine-insulin in diabetic patients. Part 1. Preparation and characterization of protamine-/sup 125/I-insulin

Energy Technology Data Exchange (ETDEWEB)

Hansen, B; Linde, S; Koelendorf, K; Jensen, F [Steno Memorial Hospital and Nordisk Insulinlaboratorium, Gentofte (Denmark). Research Lab.

1979-02-01

Protamine-/sup 125/I-insulin with low specific radioactivity was prepared using /sup 125/,/sup 127/I-insulin, 0.2 I/mole. The preparations were characterized by disc electrophoresis, isoelectric focusing and analytical gel chromatography in order to evaluate the suitability of /sup 125/I-insulin as marker for insulin in protamine-insulin. The stability of the preparations was followed up to 90 days at 4/sup 0/C. The biological and immunological activity was determined in mice, isolated rat fat cells and by radioimmunoassay. It was concluded that both from a chemical and a biological point of view, the protamine-/sup 125/I-insulin is a satisfactory preparation that might be used in absorption studies.

Magnetic hyaluronate hydrogels: preparation and characterization

International Nuclear Information System (INIS)

Tóth, Ildikó Y.; Veress, Gábor; Szekeres, Márta; Illés, Erzsébet; Tombácz, Etelka

2015-01-01

A novel soft way of hyaluronate (HyA) based magnetic hydrogel preparation was revealed. Magnetite nanoparticles (MNPs) were prepared by co-precipitation. Since the naked MNPs cannot be dispersed homogenously in HyA-gel, their surface was modified with natural and biocompatible chondroitin-sulfate-A (CSA) to obtain CSA-coated MNPs (CSA@MNPs). The aggregation state of MNPs and that loaded with increasing amount of CSA up to 1 mmol/g was measured by dynamic light scattering at pH~6. Only CSA@MNP with ≥0.2 mmol/g CSA content was suitable for magnetic HyA-gel preparation. Rheological studies showed that the presence of CSA@MNP with up to 2 g/L did not affect the hydrogel's rheological behavior significantly. The results suggest that the HyA-based magnetic hydrogels may be promising formulations for future biomedical applications, e.g. as intra-articular injections in the treatment of osteoarthritis. - Highlights: • Novel hyaluronate(HyA)-based biocompatible magnetic hydrogels were prepared. • Chondroitin-sulfate-A coating is needed to disperse magnetite particles in HyA-gel. • Rheological behavior of hydrogels was independent of the magnetite content (<2 g/L). • Gels remained in stable and homogeneously dispersed state even after 90 days storage. • Magnetic HyA-gels are promising candidates for use as intra-articular injection

Magnetic hyaluronate hydrogels: preparation and characterization

Energy Technology Data Exchange (ETDEWEB)

Tóth, Ildikó Y., E-mail: Ildiko.Toth@chem.u-szeged.hu; Veress, Gábor; Szekeres, Márta; Illés, Erzsébet; Tombácz, Etelka, E-mail: tombacz@chem.u-szeged.hu

2015-04-15

A novel soft way of hyaluronate (HyA) based magnetic hydrogel preparation was revealed. Magnetite nanoparticles (MNPs) were prepared by co-precipitation. Since the naked MNPs cannot be dispersed homogenously in HyA-gel, their surface was modified with natural and biocompatible chondroitin-sulfate-A (CSA) to obtain CSA-coated MNPs (CSA@MNPs). The aggregation state of MNPs and that loaded with increasing amount of CSA up to 1 mmol/g was measured by dynamic light scattering at pH~6. Only CSA@MNP with ≥0.2 mmol/g CSA content was suitable for magnetic HyA-gel preparation. Rheological studies showed that the presence of CSA@MNP with up to 2 g/L did not affect the hydrogel's rheological behavior significantly. The results suggest that the HyA-based magnetic hydrogels may be promising formulations for future biomedical applications, e.g. as intra-articular injections in the treatment of osteoarthritis. - Highlights: • Novel hyaluronate(HyA)-based biocompatible magnetic hydrogels were prepared. • Chondroitin-sulfate-A coating is needed to disperse magnetite particles in HyA-gel. • Rheological behavior of hydrogels was independent of the magnetite content (<2 g/L). • Gels remained in stable and homogeneously dispersed state even after 90 days storage. • Magnetic HyA-gels are promising candidates for use as intra-articular injection.

Preparation and characterization of UV-curable cationic composite adhesive

International Nuclear Information System (INIS)

Shen Yan; Yang Wenbin; Li Yintao; Xie Changqiong; Li Yingjun; Cheng Yafei; Zhou Yuanlin; Lu Zhongyuan

2011-01-01

UV-curable cationic composite adhesives containing TiO 2 nanostructures were prepared by using 3, 4-epoxycyclohexylmethyl-3, 4-epoxycyclohexanecarboxylate(CE) as monomer, triphenylsulfonium hexafluorophosphate salt (PI-432) as photoinitiator and titanium isopropoxide (TIP) as inorganic precursor. The morphology of the composite adhesives was characterized by atom force microscopy (AFM). The effect of TIP content on refractive index and transmittance of adhesives were studied. The results show that TiO 2 nanostructures, the average diameter of which is 20 nm or so, can be uniformly dispersed in polymers of composite adhesives. The refractive index of adhesives can be adjusted from 1.501 9 to 1.544 9 with the change of TIP content. The transmittance of adhesives has a slight reduce with the increase of TIP content. When TIP content is up to 40%, the transmittance of composite adhesives remains around 90% or so. (authors)

Preparation, Characterization, and Catalytic Activity of MoCo/USY Catalyst on Hydrodeoxygenation Reaction of Anisole

Science.gov (United States)

Nugrahaningtyas, K. D.; Suharbiansah, R. S. R.; Rahmawati, F.

2018-03-01

This research aims to prepare, characterize, and study the catalytic activity of Molybdenum (Mo) and Cobalt (Co) metal with supporting material Ultra Stable Y-Zeolite (USY), to produce catalysts with activity in hydrotreatment reaction and in order to eliminate impurities compounds that containing unwanted groups heteroatoms. The bimetallic catalysts MoCo/USY were prepared by wet impregnation method with weight variation of Co metal 0%, 2%, 4%, 6%, 8%, and Mo metal 8% (w/w), respectively. Activation method of the catalyst included calcination, oxidation, reduction and the crystallinity was characterized using X-ray diffraction (XRD), the acidity of the catalyst was analyzed using Fourier Transform Infrared Spectroscopy (FT-IR) and gravimetry method, minerals present in the catalyst was analyzed using X-Ray Fluorescence (XRF), and surface of the catalyst was analyzed using Surface Area Analyzer (SAA). Catalytic activity test (benzene yield product) of MoCo/USY on hydrodeoxigenation reaction of anisole aimed to determine the effect of Mo-Co/USY for catalytic activity in the reaction hydrodeoxigenation (HDO) anisole. Based on characterization and test of catalytic activity, it is known that catalytic of MoCo/USY 2% (catalyst B) shows best activities with acidity of 10.209 mmol/g, specific area of catalyst of 426.295 m2/g, pore average of 14.135 Å, total pore volume 0.318 cc/g, and total yield of HDO products 6.06%.

[Preparation and performance characterization of gold nanoparticles modified chiral capillary electrochromatography stationary phase].

Science.gov (United States)

Xiong, Lele; Li, Ruijun; Ji, Yibing

2017-07-08

Gold nanoparticles (GNPs, 15 nm) were prepared and introduced to amino groups derived silica monolithic column. Bovine serum albumin (BSA) was immobilized via covalent modification method onto the carboxylic functionalized GNPs to afford chiral stationary phase (CSP) for enantioseparation. GNPs were well dispersed and successfully incorporated onto the columns with the contents as high as 17.18% by characterization method such as transmission electron microscopy (TEM), ultraviolet (UV)-visible absorption spectra and scanning electron microscopy (SEM). The preparation conditions of the BSA modified CSP were optimized and 10% (v/v) 3-aminopropyltriethoxysilane (APTES) and 15 g/L BSA were selected as appropriate reaction conditions. The enantioseparation performance of the BSA modified CSP has been investigated by capillary electrochromatography (CEC). Enantiomers of tryptophan, ephedrine and atenolol were resolved, and the baseline separation of tryptophan was achieved. Meanwhile, the influences of pH value, buffer concentrations and applied voltages used on the chiral separation were studied, and the optimal separation conditions were 10 mmol/L phosphate buffer at pH 7.4 and 15 kV applied voltages. In comparison with the BSA modified CSP prepared by physical adsorption, the CSP prepared by covalent modification method had better separation results, and the analytes could be separated directly without pre-column derivatization. In addition, the prepared BSA modified CSP exhibited good run to run repeatability with relative standard deviations (RSDs) of the migration times and selectivity factors not more than 2.3% and 0.96%, respectively. This work offers a good thinking for modification with other proteins or other types of chiral selectors.

Thermomagnetic characterization of organic-based ferrofluids prepared with Ni ferrite nanoparticles

International Nuclear Information System (INIS)

Arana, Mercedes; Bercoff, Paula G.; Jacobo, Silvia E.

2017-01-01

Highlights: • Kerosene-based ferrofluids of Ni-ferrite NPs from high energy ball milling. • Thermomagnetic characterization of organic-based ferrofluids. • Measured thermal variables enhancements of ferrofluid vs. magnetic field. • Curves successfully fitted by a gas-compression model of nanoaggregates. - Abstract: In this work, a thermomagnetic characterization of kerosene-based ferrofluids (FFs) prepared with Ni-ferrite nanoparticles (NPs) is performed by measuring their thermal conductivity and diffusivity coefficient enhancements. The particles were synthesized by high-energy ball milling, as an alternative to the most commonly chosen NPs synthesis methods for FFs. The action of an applied magnetic field on the FF increases the thermal conductivity and diffusivity due to cooperation between the NPs, as it agglomerates them favoring chain-like and clusters formations. It was found that the heat capacity of the studied FFs decreases under the application of a magnetic field. The obtained results for thermal conductivity of FFs under magnetic fields were fitted by a gas-compression model that considers NPs agglomerates in the fluid.

Amylose–halloysite–TiO{sub 2} composites: Preparation, characterization and photodegradation

Energy Technology Data Exchange (ETDEWEB)

Zheng, Pengwu; Du, Yuanyuan [School of Pharmacy, Jiangxi Science and Technology Normal University, 330013 Nanchang, Jiangxi (China); Chang, Peter R. [Bioproducts and Bioprocesses National Science Program, Agriculture and Agri-Food Canada, 107 Science Place, Saskatoon, SK S7N 0X2 Canada (Canada); Department of Chemical and Biological Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9 (Canada); Ma, Xiaofei, E-mail: maxiaofei@tju.edu.cn [Chemistry Department, School of Science, Tianjin University, Tianjin 300072 (China)

2015-02-28

Highlights: • The amylose–HNT–TiO{sub 2} with high dispersion of TiO{sub 2} was fabricated. • The amylose–HNT–TiO{sub 2} was characterized. • The photodegradation of MB and 4-NP was investigated. - Abstract: A supramolecular structure was initially formed between amylose and halloysite (HNT) simply by using a mechanical force. Subsequently, amylose acted as a template for the growth of TiO{sub 2} nanoparticles. The thus-prepared amylose–HNT–TiO{sub 2} composite was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analyses, and transmission electron microscopy (TEM). In comparison to its counterpart HNT-TiO{sub 2} composite, the amylose–HNT–TiO{sub 2} composite exhibited better dispersion, a larger specific surface area, and photocatalytic activity that was more effective for the photodegradation/removal of methylene blue (MB) and the persistent organic pollutant 4-nitrophenol (4-NP) under UV irradiation. After four successive UV irradiation treatments, amylose–HNT–TiO{sub 2} removed about 90% of 4-NP or MB.

Preparation and characterization of alginate and gelatin microcapsules containing Lactobacillus rhamnosus.

Science.gov (United States)

Lopes, Susiany; Bueno, Luciano; Aguiar, Francisco DE; Finkler, Christine

2017-01-01

This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was the concentration of viable cells. Beads were characterized in terms of size, morphology, scanning electron microscopy (SEM), moisture content, Fourier Transform Infrared Spectrometry (FTIR), thermal behavior and cell viability during storage. The results showed that the highest concentration of viable cells (4.2 x 109 CFU/g) was obtained for 1 % w/v of alginate and 0.1 % w/v of gelatin. Capsules were predominantly spherical with a rough surface, a narrow size distribution ranging from 1.53 to 1.90 mm and a moisture content of 97.70 ± 0.03 %. Furthermore, FTIR and thermogravimetric analysis indicated an interaction between alginate-gelatin. Cell concentration of alginate/gelatin microcapsules was 105 CFU/g after 4 months of storage at 8 oC.

Thermomagnetic characterization of organic-based ferrofluids prepared with Ni ferrite nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Arana, Mercedes, E-mail: mercedes.arana@labh2.coppe.ufrj.br [Facultad de Matemática, Astronomía, Física y Computación (FaMAF), Universidad Nacional de Córdoba, IFEG, CONICET, Medina Allende s/n, Ciudad Universitaria, Córdoba (Argentina); Bercoff, Paula G. [Facultad de Matemática, Astronomía, Física y Computación (FaMAF), Universidad Nacional de Córdoba, IFEG, CONICET, Medina Allende s/n, Ciudad Universitaria, Córdoba (Argentina); Jacobo, Silvia E. [DiQuiMMAI, Facultad de Ingeniería, Universidad de Buenos Aires, INTECIN, CONICET, Av. Paseo Colón 850, Buenos Aires (Argentina)

2017-01-15

Highlights: • Kerosene-based ferrofluids of Ni-ferrite NPs from high energy ball milling. • Thermomagnetic characterization of organic-based ferrofluids. • Measured thermal variables enhancements of ferrofluid vs. magnetic field. • Curves successfully fitted by a gas-compression model of nanoaggregates. - Abstract: In this work, a thermomagnetic characterization of kerosene-based ferrofluids (FFs) prepared with Ni-ferrite nanoparticles (NPs) is performed by measuring their thermal conductivity and diffusivity coefficient enhancements. The particles were synthesized by high-energy ball milling, as an alternative to the most commonly chosen NPs synthesis methods for FFs. The action of an applied magnetic field on the FF increases the thermal conductivity and diffusivity due to cooperation between the NPs, as it agglomerates them favoring chain-like and clusters formations. It was found that the heat capacity of the studied FFs decreases under the application of a magnetic field. The obtained results for thermal conductivity of FFs under magnetic fields were fitted by a gas-compression model that considers NPs agglomerates in the fluid.

Preparation and characterization of alginate and gelatin microcapsules containing Lactobacillus rhamnosus

Directory of Open Access Journals (Sweden)

SUSIANY LOPES

2017-08-01

Full Text Available ABSTRACT This paper describes the preparation and characterization of alginate beads coated with gelatin and containing Lactobacillus rhamnosus. Capsules were obtained by extrusion method using CaCl2 as cross linker. An experimental design was performed using alginate and gelatin concentrations as the variables investigated, while the response variable was the concentration of viable cells. Beads were characterized in terms of size, morphology, scanning electron microscopy (SEM, moisture content, Fourier Transform Infrared Spectrometry (FTIR, thermal behavior and cell viability during storage. The results showed that the highest concentration of viable cells (4.2 x 109 CFU/g was obtained for 1 % w/v of alginate and 0.1 % w/v of gelatin. Capsules were predominantly spherical with a rough surface, a narrow size distribution ranging from 1.53 to 1.90 mm and a moisture content of 97.70 ± 0.03 %. Furthermore, FTIR and thermogravimetric analysis indicated an interaction between alginate-gelatin. Cell concentration of alginate/gelatin microcapsules was 105 CFU/g after 4 months of storage at 8 oC.

Preparation and characterization of water-absorbing composite ...

African Journals Online (AJOL)

The present work introduces a novel method for the formation of water absorbing composite membrane. The prepared composite is based on chitosan, carboxymethyl cellulose (CMC), and Montmorillonite. Prepared composite membrane exhibits high water absorbing and holding capacity with increasing clay content.

Preparation and characterization of water-absorbing composite ...

African Journals Online (AJOL)

ABCO

2012-08-16

Aug 16, 2012 ... The present work introduces a novel method for the formation of water absorbing composite membrane. The prepared composite is based on chitosan, carboxymethyl cellulose (CMC), and. Montmorillonite. Prepared composite membrane exhibits high water absorbing and holding capacity with increasing ...

Preparation and characterization of rare earth modified nanocrystalline Al2O3/13 wt%TiO2 feedstock for plasma spraying.

Science.gov (United States)

Wang, Y; Tian, W; Yang, Y

2009-02-01

The preparation and characterization of RE modified nanocrystalline Al2O3/13 wt%TiO2 feedstock for plasma spraying are described in this paper. Taking individual nano particles as starting materials, by wet ball milling, spray drying, sintering and plasma treating, nanocrystalline plasma sprayable feedstock is prepared. The as-prepared feedstocks were analyzed by XRD, SEM, EDS, TEM and HRTEM methods. As shown from analyses results, the reconstituted agglomerate feedstock possesses spherical geometry, proper particle size, homogeneous composition distribution and nano scaled grains. There are three dimensional net structures in the prepared feedstock, which could be retained in coatings if the feedstock does not melt or partially melts during the plasma spray process. The three dimensional net structures could play an important role in improving crack propagation resistance and wear resistance of coatings. The reconstitution process and characterization methods discussed in this paper can also be applied to prepare intraclass nanocrystalline feedstock such as ZrO2/Y2O3 and Cr2O3 et al.

Preparation and characterization of complexes of RE3+ with furfural modified water-soluble chitosan

Institute of Scientific and Technical Information of China (English)

WANG Maoyuan; QIU Ligan; MA Guilin

2008-01-01

Degraded chitosan, with highly water-solubility, was obtained by the oxidation of chitosan with H2O2, and then reacted with furfural The final product coordinated with the rare earth ions (RE3+ = Sm3+,Eu3+), which led to the formation of the complexes. The prepared complexes were characterized with Inflated Spectroscopy (IR), Ultra Violet (UV), fluorescence, X-Ray Diffraction (XRD), and Thermogravimetric-Differential Scanning Calorimetry (TG-DSC) measurements.

Preparation and characterization of antibacterial Au/C core-shell composite

Energy Technology Data Exchange (ETDEWEB)

Gao Yanhong [Department of Chemistry and Institute of Nanochemistry, Jinan University, 601 Huangpudadaoxi Road, Guangzhou 510632, Guangdong (China); Centers for Disease Control and Prevention of Guangdong Province, Guangzhou 510300, Guangdong (China); Zhang Nianchun [Department of Chemistry and Institute of Nanochemistry, Jinan University, 601 Huangpudadaoxi Road, Guangzhou 510632, Guangdong (China); Zhong Yuwen [Centers for Disease Control and Prevention of Guangdong Province, Guangzhou 510300, Guangdong (China); Cai Huaihong [Department of Chemistry and Institute of Nanochemistry, Jinan University, 601 Huangpudadaoxi Road, Guangzhou 510632, Guangdong (China); Liu Yingliang, E-mail: tliuyl@jnu.edu.cn [Department of Chemistry and Institute of Nanochemistry, Jinan University, 601 Huangpudadaoxi Road, Guangzhou 510632, Guangdong (China)

2010-09-01

An environment-friendly oxidation-reduction method was used to prepare Au/C core-shell composite using carbon as core and gold as shell. The chemical structures and morphologies of Au/C core-shell composite and carbon sphere were characterized by X-ray diffraction, transmission electron microscope, energy dispersion X-ray spectrometry (EDS) and X-ray photoelectron spectroscopy (XPS). The antibacterial properties of the Au/C core-shell composite against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Candida albicans (C. albicans) were examined by the disk diffusion assay and minimal inhibition concentration (MIC) methods. In addition, antibacterial ability of Au/C core-shell composite was observed by atomic force microscope. Results demonstrated that gold homogeneously supported on the surface of carbon spheres without aggregation and showed efficient antibacterial abilities.

Preparation and thermal properties characterization of carbonate salt/carbon nanomaterial composite phase change material

International Nuclear Information System (INIS)

Tao, Y.B.; Lin, C.H.; He, Y.L.

2015-01-01

Highlights: • Nanocomposite phase change materials were prepared and characterized. • Larger specific surface area is more efficient to enhance specific heat. • Columnar structure is more efficient to enhance thermal conductivity. • Thermal conductivity enhancement is the key. • Single walled carbon nanotube is the optimal nanomaterial additive. - Abstract: To enhance the performance of high temperature salt phase change material, four kinds of carbon nanomaterials with different microstructures were mixed into binary carbonate eutectic salts to prepare carbonate salt/nanomaterial composite phase change material. The microstructures of the nanomaterial and composite phase change material were characterized by scanning electron microscope. The thermal properties such as melting point, melting enthalpy, specific heat, thermal conductivity and total thermal energy storage capacity were characterized. The results show that the nanomaterial microstructure has great effects on composite phase change material thermal properties. The sheet structure Graphene is the best additive to enhance specific heat, which could be enhanced up to 18.57%. The single walled carbon nanotube with columnar structure is the best additive to enhance thermal conductivity, which could be enhanced up to 56.98%. Melting point increases but melting enthalpy decreases with nanomaterial specific surface area increase. Although the additives decrease the melting enthalpy of composite phase change material, they also enhance the specific heat. As a combined result, the additives have little effects on thermal energy storage capacity. So, for phase change material performance enhancement, more emphasis should be placed on thermal conductivity enhancement and single walled carbon nanotube is the optimal nanomaterial additive

Physical characterization of porous hydroxyapatite prepared by slip casting route

International Nuclear Information System (INIS)

Rusnah Mustaffa; Idris Besar; Mohd Reusmaazran Yusof; Che Rohaida Che Hak

2005-01-01

Recent developments have led to an interest in the potential of porous hydroxyapatite (HA) as a synthetic bone graft. The starting material, that is HA powder, was prepared by the precipitation method using calcium hydroxide and ortho-phosporic acid. Through this route, the HA powder was first made into a slip by mixing with binder and then the slip was transferred into a mould. The binder was used as the porosifier where different ratios of HA to binder were studied. The material was then dried in oven followed by burning in furnace and finally the porous product was obtained and ready for characterization after sintering. The paper presents some characterization of porous HA products including chemical composition, density and macrostructure. The pore sizes obtained were in the range 200 mm to 400 mm diameters. From the different HA to binder ratios, variation in apparent densities were observed which is in the range of 2.63 to 2.76 g/cm 3 . The morphology of porous HA was observed by Scanning Electron Microscope (SEM) at 15 KV. The chemical structure and composition were also determined using Fourier Transform Infrared spectroscopy (FTIR) and the SEM EDAX, respectively, and the results will also be discussed. (Author)

PREPARATION AND CHARACTERIZATION OF DIALDEHYDE ...

African Journals Online (AJOL)

User

Dialdehyde starch urea (DASU) was prepared by the reaction of dialdehyde starch (DAS) from ... is representative one for the treatment of heavy metal ... It was reported that Potassium ... 0.2mol/L sulfuric acid, 100cm3 of water and 2cm3 of.

Preparation, characterization and certification of uranium isotope reference materials

International Nuclear Information System (INIS)

Oliveira Junior, Olivio Pereira de

2006-01-01

This work describes the preparation, characterization and certification of a set of uranium isotope reference materials ranging from 0.5 to 20.0 % of 235 U in mass. The most important concepts of metrology in chemical measurements were applied so that the certified quantities in these materials could be directly traceable to the International System of Units (SI). As a consequence of this approach, these materials can be used in the instruments calibration, estimation of measurement uncertainty, method validation, assessment of performance of analysts, quality control routines and interlaboratory comparison programmes. The most advanced methods and techniques in mass spectrometry, that is, gas source mass spectrometry (GSMS), thermal ionisation mass spectrometry (TIMS) and inductively coupled plasma mass spectrometry (ICPMS) were investigated to identify which are the dominant components in the uncertainty and to quantify its contribution to the final value of the measurement uncertainty of the isotopic ratio. The results obtained were then compared to verify which are the methods and techniques associated to the lowest measurement uncertainty values. The isotope amount ratio n( 235 U)/n( 238 U) was certified in the materials produced to expanded uncertainties ranging from 0.02 to 0.10 % and the ratios n( 234 U)/n( 238 U) and n( 236 U)/n( 238 U), to uncertainties ranging from 0.03 to 2.20 %. These values fully comply to the requirements of the isotopic characterization of nuclear fuel as well as the analysis of environmental samples for nuclear safeguards. (author)

Preparation and characterization of clay bonded high strength silica refractory by utilizing agriculture waste

International Nuclear Information System (INIS)

Bhardwaj, A.; Hossain, S.K.S.; Majh, M.R.

2017-01-01

Clay bonded silica refractory was prepared by utilizing agriculture waste called rice husk ash (RHA) and refractory grog. Various samples were prepared with different compositions based upon partial replacement of quartz by RHA. Rectangular samples were prepared by following semi dry process prior to pressing in a uniaxial hydraulic press and sintering at a temperature of 1200°C in air atmosphere. Various physical, mechanical and thermal characterizations were done like X-ray diffraction (XRD), scanning electron microscope (SEM), apparent porosity (AP), bulk density (BD), cold crushing strength (CCS), refractoriness and thermal conductivity measurement. The sample utilizing 30% of RHA was considered most optimum composition which produced cold crushing strength of 38MPa and thermal conductivity of 2.08W/mK at 800°C with a considerable good refractoriness. Enhancement in the mechanical as well as thermal properties may be considered as attributed to the amorphous silica which has reacted more easily and efficiently with other material surrounding giving rise to the densification and produced stable crystalline phase to the refractory material. These promising characteristics suggests that the RHA may lead to be used as a potential material for the preparation of clay bonded high strength silica refractories. [es

Preparation and characterization of catalyst 20% Co/SBA-15

International Nuclear Information System (INIS)

Lima, L.A.; Nogueira, A.C.; Rodrigues, J.J.; Rodrigues, M.G.F.

2012-01-01

The utilization of molecular sieves as supports for cobalt catalysts are promising. SBA-15 is a class of mesoporous silicate with a high thermal stability and high degree of structural order, which confers an important feature for the catalytic process. It was prepared SBA-15 molecular sieve with molar composition: 1.0 TEOS: 0017P123: 5.7 HCl: 193 H2O. The deposition of cobalt on the substrate SBA-15 was performed by wet impregnation, using a solution of 0.1M cobalt nitrate. The materials were characterized by the techniques of X-Ray Diffraction (XRD), chemical analysis by X-Ray Spectrometry by Energy Dispersive (EDX), and nitrogen adsorption (BET). By XRD and BET verified the formation of SBA-15, and after the impregnation there was no change in the structure, with EDX showed that the impregnation method is efficient, the sample showed cobalt content close to the nominal value. (author)

Preparation and characterization of clove essential oil-loaded liposomes.

Science.gov (United States)

Sebaaly, Carine; Jraij, Alia; Fessi, Hatem; Charcosset, Catherine; Greige-Gerges, Hélène

2015-07-01

In this study, suitable formulations of natural soybean phospholipid vesicles were developed to improve the stability of clove essential oil and its main component, eugenol. Using an ethanol injection method, saturated (Phospholipon 80H, Phospholipon 90H) and unsaturated soybean (Lipoid S100) phospholipids, in combination with cholesterol, were used to prepare liposomes at various eugenol and clove essential oil concentrations. Liposomal batches were characterized and compared for their size, polydispersity index, Zeta potential, loading rate, encapsulation efficiency and morphology. The liposomes were tested for their stability after storing them for 2 months at 4°C by monitoring changes in their mean size, polydispersity index and encapsulation efficiency (EE) values. It was found that liposomes exhibited nanometric oligolamellar and spherical shaped vesicles and protected eugenol from degradation induced by UV exposure; they also maintained the DPPH-scavenging activity of free eugenol. Liposomes constitute a suitable system for encapsulation of volatile unstable essential oil constituents. Copyright © 2015 Elsevier Ltd. All rights reserved.

Porous PEOT/PBT scaffolds for bone tissue engineering: preparation, characterization, and in vitro bone marrow cell culturing

NARCIS (Netherlands)

Claase, M.B.; Grijpma, Dirk W.; Mendes, S.C.; Mendes, Sandra C.; de Bruijn, Joost Dick; Feijen, Jan

2003-01-01

The preparation, characterization, and in vitro bone marrow cell culturing on porous PEOT/PBT copolymer scaffolds are described. These scaffolds are meant for use in bone tissue engineering. Previous research has shown that PEOT/PBT copolymers showed in vivo degradation, calcification, and bone

Preparation and characterization of isoniazid-loaded crude soybean lecithin liposomes.

Science.gov (United States)

Nkanga, Christian Isalomboto; Krause, Rui Werner; Noundou, Xavier Siwe; Walker, Roderick Bryan

2017-06-30

Tuberculosis (TB) is a poverty related infectious disease that is rapidly giving rise to public health concerns. Lengthy drug administration and frequent adverse side-effects associated with TB treatment make anti-tubercular drugs (ATDs) good candidates for drug delivery studies. This work aimed to formulate and prepare liposomes as a cost-effective option for ATD delivery. Liposomes were prepared by film hydration using crude soybean lecithin (CL) and not pure phospholipids as in the normal practice. Cholesterol was also used (up to 25% mass ratio), and isoniazid (INH) was encapsulated as model drug using a freeze-thaw loading technique. Purified soybean lecithin (PL) was also used for comparative purposes, under the same conditions. INH-loaded liposomes were characterized for particle size, Zeta Potential (ZP), encapsulation efficiency (EE) and drug release. Physicochemical properties were investigated using thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction and Fourier transform infrared. INH-loaded CL-based liposomes showed high EE (79±2.45%). The average particle size (813.00±9.21nm) and ZP (-42.80±4.31mV) of this formulation are promising for the treatment of TB by pulmonary delivery. These findings suggest the possibility of encapsulating ATDs in liposomes made of crude soybean lecithin that is cheap and readily available. Copyright © 2017 Elsevier B.V. All rights reserved.

Preparation and characterization of biocellulose membranes obtained by biosynthesis of bacteria komagataeibacter rhaeticus

International Nuclear Information System (INIS)

Machado, Rachel Temperani A.; Tercjak, Agnieszka; Gutierrez, Juncal; Barud, Hernane S.

2015-01-01

This work shows preparation and characterization of bacterial cellulose membranes (CB) produced by Komagataeibacter rhaeticus strain, and strain from ATCC bank, Gluconacetobacter hansenii (ATCC 23769) used as a comparative. Physicochemical assay were done, such as Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), Scanning Electron Microscopy couplet to Energy-dispersive X-ray spectroscopy (SEM/EDX). SEM images reveled a compact structure formed by cellulose nanofibers. FTIR spectra are shown characteristics bands of cellulosic materials and XRD shows cellulose native structure, type I cellulose. (author)

Microscopic characterizations of membrane electrode assemblies prepared under different hot-pressing conditions

International Nuclear Information System (INIS)

Liang, Z.X.; Zhao, T.S.; Xu, C.; Xu, J.B.

2007-01-01

The durability of the membrane electrode assembly (MEA) for direct methanol fuel cells (DMFCs) is one of the most critical issues to be addressed before widespread commercialization of the DMFC technology. In this work, we investigated the effect of the hot-pressing duration on the performance and durability of the MEA prepared by hot-pressing technique. It was found that the 60-min hot pressing at 135 deg. C under the pressure of 4.0 MPa yielded a significantly improved MEA durability than did the 3-min hot pressing (a typical duration in practice) under the same condition, but no substantial difference was found in the cell performance of the MEAs prepared with the two different hot-pressing durations. The reason why the hot-pressing duration had no significant effect on cell performance is explained based on X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) characterizations of the changes in the physiochemical properties of MEAs and their constituent components, including the anode, cathode and Nafion membrane, before and after hot pressing with different durations

Preparation and characterization of Fe{sub 3}O{sub 4}-Pt nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Andrade, Ângela Leão, E-mail: angelala01@hotmail.com [Federal University of Ouro Preto (UFOP), Department of Chemistry, ICEB (Brazil); Cavalcante, Luis Carlos Duarte [Federal University of Piauí (UFPI), Center of Natural Sciences (Brazil); Fabris, José Domingos [Federal University of Minas Gerais (UFMG), Department of Chemistry, ICEx (Brazil); Pereira, Márcio César [Federal University of the Jequitinhonha and Mucuri Valleys (UFVJM), Institute of Science, Engineering and Technology (Brazil); Ardisson, José Domingos [Center for the Development of the Nuclear Technology (CDTN), Laboratory of Applied Physics (Brazil); Domingues, Rosana Zacarias [Federal University of Minas Gerais (UFMG), Department of Chemistry, ICEx (Brazil)

2017-11-15

Pt and Pt-based nanomaterials are active anticancer drugs for their ability to inhibit the division of living cells. Nanoparticles of magnetite containing variable proportions of platinum were prepared in the laboratory. The magnetite nanoparticles with platinum (Pt-Fe{sub 3}O{sub 4}) were obtained by reducing the Fe{sup 3+} of the maghemite (γ Fe{sub 2}O{sub 3}) mixed with platinum (II) acetylacetonate and sucrose in two inversely coupled ceramic crucibles and heated in a furnace at 400 °C for 20 min. The formed carbon during this preparation acts to chemically reduce the ferric iron in maghemite. Moreover, its residual layer on the particle surface prevents the forming magnetite from oxidizing in air and helps retain the platinum in the solid mixture. The produced Pt-magnetite samples were characterized by {sup 57}Fe-Mössbauer spectroscopy, powder X-ray diffraction, scanning electron microscopy, and magnetization measurements. Measurements of AC magnetic-field-induced heating properties of the obtained nanocomposites, in aqueous solution, showed that they are suitable as a hyperthermia agent for biological applications.

Raman and IR spectroscopic structural characterization of LiAlO2 powders prepared using a liquid mix technique

International Nuclear Information System (INIS)

Cornilsen, B.C.; Loyselle, P.L.; Saporta, J.D.

1990-01-01

γ-LiAlO 2 and β-LiAlO 2 have been characterized using Raman and infrared spectroscopy. Powders have been prepared using two different preparation techniques: a solution method known as the liquid mix technique (LMT) and the traditional ceramic method. The authors find that the LMT allows direct production of single phase γ-LiAlO 2 at 600 degrees C, below that found using other preparation methods. Furthermore, this solution technique appears to avoid formation of the β-LiAlO 2 intermediate phase. At lower temperatures, the LMT product is a disordered precursor of γ- LiAlO 2

Protocols for the analytical characterization of therapeutic monoclonal antibodies. II - Enzymatic and chemical sample preparation.

Science.gov (United States)

Bobaly, Balazs; D'Atri, Valentina; Goyon, Alexandre; Colas, Olivier; Beck, Alain; Fekete, Szabolcs; Guillarme, Davy

2017-08-15

The analytical characterization of therapeutic monoclonal antibodies and related proteins usually incorporates various sample preparation methodologies. Indeed, quantitative and qualitative information can be enhanced by simplifying the sample, thanks to the removal of sources of heterogeneity (e.g. N-glycans) and/or by decreasing the molecular size of the tested protein by enzymatic or chemical fragmentation. These approaches make the sample more suitable for chromatographic and mass spectrometric analysis. Structural elucidation and quality control (QC) analysis of biopharmaceutics are usually performed at intact, subunit and peptide levels. In this paper, general sample preparation approaches used to attain peptide, subunit and glycan level analysis are overviewed. Protocols are described to perform tryptic proteolysis, IdeS and papain digestion, reduction as well as deglycosylation by PNGase F and EndoS2 enzymes. Both historical and modern sample preparation methods were compared and evaluated using rituximab and trastuzumab, two reference therapeutic mAb products approved by Food and Drug Administration (FDA) and European Medicines Agency (EMA). The described protocols may help analysts to develop sample preparation methods in the field of therapeutic protein analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

Preparation and characterization of novel nanocomposite films formed from silk fibroin and nano-TiO2.

Science.gov (United States)

Feng, Xin-Xing; Zhang, Li-Li; Chen, Jian-Yong; Guo, Yu-Hai; Zhang, Hua-Peng; Jia, Chang-Ian

2007-01-30

This paper describes the synthesis and characterization of new regenerated silk fibroin (SF)/nano-TiO(2) composite films. The preparation method, based on the sol-gel technique using butyl titanate as oxide precursor, could avoid reagglomeration of the prepared nanoparticles. Samples were characterized mainly by X-ray diffraction (XRD), ultra-violet (UV) spectroscopy, atomic force microscopy (AFM), Fourier transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA). The UV and AFM results indicated that TiO(2) nanoparticles could be well dispersed inside the SF film, and the size of TiO(2) was about 80nm. The XRD and FT-IR analysis implied that the formation of nano-TiO(2) particles may induce the conformational transition of silk fibroin to a typical Silk II structure partly with the increasing of crystallinity in the composite films. Compared to the pure SF films, the mechanical and thermal properties of composite films were improved, and the solubility in water was decreased due to the conformational transition of silk fibroin to Silk II structure.

Review of intermediate and final product characterization on coated particles preparation

International Nuclear Information System (INIS)

Sukarsono; Kristanti Nurwidyaningrum

2015-01-01

Review of the intermediate and final product characterization on preparation of coated particles was done. Product characterization included a tool to measure the character of raw materials, intermediate product and the final product of the process, which affects the success of getting the high temperature reactor fuel are eligible. Equipment's for the characterization of such materials were pH meter, viscometer, microbalance, turbidity meter, tab density measurement, true density measurement and auto pycnometer. Being for the measurement of particles there are two types destructive testing and non destructive. Destructive testing was done by polished the particles then cross sectional imaging of particle observed using an optical microscope. In this way contains errors due to polishing treatment that could not be right on the equator section so it needs correction. Destructive testing also create waste that must be processed from the remnants of the polishing process. By using non-destructive testing, waste was not formed but the imaging results are often unclear due to lack of contrast. Development of non-destructive test equipment has been made using radiographic method and automated microscopy. The overall activity is still much needed additional tools for measurement and for processing, so that the results obtained will not rejected as the specification of nuclear fuel. Similarly, in the case of a sampling test method and limits to a product accepted or rejected, it should be determined based on statistical methods. (author)

Preparation and characterization of alginate microspheres for sustained protein delivery within tissue scaffolds

International Nuclear Information System (INIS)

Zhai Peng; Chen, X B; Schreyer, David J

2013-01-01

Tissue engineering scaffolds are designed not only to provide structural support for the repair of damaged tissue, but can also serve the function of bioactive protein delivery. Here we present a study on the preparation and characterization of protein-loaded microspheres, either alone or incorporated into mock tissue scaffolds, for sustained protein delivery. Alginate microspheres were prepared by a novel, small-scale water-in-oil emulsion technique and loaded with fluorescently labeled immunoglobulin G (IgG). Microsphere size appears to be influenced by the magnitude and distribution of force generated by mechanical stirring during emulsion. Protein release studies show that sustained IgG release from microspheres could be achieved and that application of a secondary coating of chitosan could further slow the rate of protein release. Preservation of bioactivity of released IgG protein was confirmed using an immunohistochemical assay. When IgG-loaded microspheres were incorporated into mock scaffolds, initial protein release was diminished and the overall time course of release was extended. The present study demonstrates that protein-loaded microspheres can be prepared with a controlled release profile and preserved biological activity, and can be incorporated into scaffolds to achieve sustained and prolonged protein delivery in a tissue engineering application. (paper)

Preparation and characterization of dialdehyde starch by one-step acid hydrolysis and oxidation.

Science.gov (United States)

Zuo, Yingfeng; Liu, Wenjie; Xiao, Junhua; Zhao, Xing; Zhu, Ying; Wu, Yiqiang

2017-10-01

Dialdehyde starch was prepared by one-step synthesis of acid hydrolysis and oxidation, using corn starch as the raw material, sodium periodate (NaIO 4 ) as the oxidant, and hydrochloric acid (HCl) as the acid solution. The prepared dialdehyde starch was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and gel permeation chromatography (GPC). The results confirmed that oxidation occurred between the starch and NaIO 4 . The acid hydrolysis reaction reduced the molecular weight of starch and effectively improved the aldehyde group contents (92.7%). Scanning electron microscope (SEM) analysis indicated that the average particle size decreased after acid hydrolysis and oxidation reaction. X-ray diffraction (XRD) and thermal gravimetric analyzer (TGA) analysis demonstrated that the crystallinity of the obtained dialdehyde starch showed a downward trend and a decelerated thermal decomposition rate. The starch after acid hydrolysis and oxidation exhibited lower hot paste viscosity and higher reactivity. Copyright © 2017. Published by Elsevier B.V.

Clozapine-carboxylic acid plasticized co-amorphous dispersions: Preparation, characterization and solution stability evaluation

Directory of Open Access Journals (Sweden)

Ali Ahmed Mahmoud Abdelhaleem

2015-06-01

Full Text Available This study addressed the possibility of forming of co-amorphous systems between clozapine (CZ and various carboxylic acid plasticizers (CAPs. The aim was to improve the solubility and oral bioavailability of clozapine. Co-amorphous dispersions were prepared using modified solvent evaporation methodology at drug/plasticizer stoichiometric ratios of 1:1, 1:1.5 and 1:2. Solid state characterization was performed using differential scanning calorimetry, X-ray diffraction and infra red spectroscopy. Highly soluble homogeneous co-amorphous dispersions were formed between clozapine and CAPs via hydrogen bonding. The co-amorphous dispersions formed with tartaric acid (1:2 showed the highest dissolution percentage (> 95 % in 20 minutes compared to pure crystalline CZ (56 %. Highly stable solutions were obtained from co-amorphous CZ-citric and CZ-tartaric acid at 1:1.5 molar ratio. The prepared dispersions suggest the possibility of peroral or sublingual administration of highly soluble clozapine at a reduced dose with the great chance to bypass the first pass metabolism.

Preparation and characterization of macrocapsules containing microencapsulated PCMs (phase change materials) for thermal energy storage

International Nuclear Information System (INIS)

Han, Pengju; Lu, Lixin; Qiu, Xiaolin; Tang, Yali; Wang, Jun

2015-01-01

This paper was aimed to prepare, characterize and determine the comprehensive evaluation of promising composite macrocapsules containing microencapsulated PCMs (phase change materials) with calcium alginate gels as the matrix material. Macrocapsules containing microcapsules were fabricated by piercing-solidifying incuber method. Two kinds of microcapsules with n-tetradecane as core material, UF (urea-formaldehyde) and PMMA (poly(methyl methacrylate)) respectively as shell materials were prepared initially. For application concerns, thermal durability and mechanical property of macrocapsules were investigated by TGA (thermal gravimetric analysis) and Texture Analyser for the first time, respectively. The results showed excellent thermal stability and the compressive resistance of macrocapsules was sufficient for common application. The morphology and chemical structure of the prepared microcapsules and macrocapsules were characterized by SEM (scanning electron microscopy) and FT-IR (fourier transform infrared) spectroscopy method. Phase change behaviors and thermal durability of microcapsules and macrocapsules were investigated by DSC (differential scanning calorimetry). In order to improve latent heat of composite microcapsules, the core-shell weight ratio of tetradecane/UF shell microcapsules was chosen as 5.5:1 which obtained the phase change enthalpy of 194.1 J g −1 determined by DSC. In conclusion, these properties make it a feasible composite in applications of textile, building and cold-chain transportation. - Highlights: • We improved the phase change enthalpy with a higher core-shell ratio. • Urea-formaldehyde was firstly used as a shell material in the composite. • Mechanical and thermal durability property of the macrocapsules was firstly investigated in our work.

Preparation and Characterization of a Gastric Floating Dosage Form of Capecitabine

Directory of Open Access Journals (Sweden)

Ehsan Taghizadeh Davoudi

2013-01-01

Full Text Available Gastrointestinal disturbances, such as nausea and vomiting, are considered amongst the main adverse effects associated with oral anticancer drugs due to their fast release in the gastrointestinal tract (GIT. Sustained release formulations with proper release profiles can overcome some side effects of conventional formulations. The current study was designed to prepare sustained release tablets of Capecitabine, which is approved by the Food and Drug Administration (FDA for the treatment of advanced breast cancer, using hydroxypropyl methylcellulose (HPMC, carbomer934P, sodium alginate, and sodium bicarbonate. Tablets were prepared using the wet granulation method and characterized such that floating lag time, total floating time, hardness, friability, drug content, weight uniformity, and in vitro drug release were investigated. The sustained release tablets showed good hardness and passed the friability test. The tablets’ floating lag time was determined to be 30–200 seconds, and it floated more than 24 hours and released the drug for 24 hours. Then, the stability test was done and compared with the initial samples. In conclusion, by adjusting the right ratios of the excipients including release-retarding gel-forming polymers like HPMC K4M, Na alginate, carbomer934P, and sodium bicarbonate, sustained release Capecitabine floating tablet was formulated.

Preparation and characterization of a gastric floating dosage form of capecitabine.

Science.gov (United States)

Taghizadeh Davoudi, Ehsan; Ibrahim Noordin, Mohamed; Kadivar, Ali; Kamalidehghan, Behnam; Farjam, Abdoreza Soleimani; Akbari Javar, Hamid

2013-01-01

Gastrointestinal disturbances, such as nausea and vomiting, are considered amongst the main adverse effects associated with oral anticancer drugs due to their fast release in the gastrointestinal tract (GIT). Sustained release formulations with proper release profiles can overcome some side effects of conventional formulations. The current study was designed to prepare sustained release tablets of Capecitabine, which is approved by the Food and Drug Administration (FDA) for the treatment of advanced breast cancer, using hydroxypropyl methylcellulose (HPMC), carbomer934P, sodium alginate, and sodium bicarbonate. Tablets were prepared using the wet granulation method and characterized such that floating lag time, total floating time, hardness, friability, drug content, weight uniformity, and in vitro drug release were investigated. The sustained release tablets showed good hardness and passed the friability test. The tablets' floating lag time was determined to be 30-200 seconds, and it floated more than 24 hours and released the drug for 24 hours. Then, the stability test was done and compared with the initial samples. In conclusion, by adjusting the right ratios of the excipients including release-retarding gel-forming polymers like HPMC K4M, Na alginate, carbomer934P, and sodium bicarbonate, sustained release Capecitabine floating tablet was formulated.

Preparation of chitosan-ferulic acid conjugate: Structure characterization and in the application of pharmaceuticals.

Science.gov (United States)

Li, Chen; Li, Jian-Bin

2017-12-01

A novel drug delivery system based on chitosan derivatives was prepared by introducting ferulic acid to chitosan adopting a free radical-induced grafting procedure. This paper used an ascorbic acid/hydrogen peroxide redox pair as radical initiator. The chitosan derivative was characterized by Fourier transformed infrared (FTIR), Ultraviolet-visible spectrum (UV), Differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Electron microscopic scanning (SEM). What is more, preparing microcapsules with the chitosan conjugate as wall material, the drug release propertie of chitosan conjugates were compared with that of a blank chitosan, which treated in the same conditions but in the absence of ferulic acid. The study clearly demonstrates that free radical-induced grafting procedure was an effective reaction methods and chitosan-ferulic acid is a potential functionalized carrier material for drug delivery. Copyright © 2017 Elsevier B.V. All rights reserved.

Characteristic features of tacrolimus-induced lung disease in rheumatoid arthritis patients.

Science.gov (United States)

Sasaki, Takanori; Nakamura, Wataru; Inokuma, Shigeko; Matsubara, Erika

2016-02-01

This paper aims to study the background and clinical characteristics of tacrolimus (TAC)-induced lung disease. A case of a rheumatoid arthritis (RA) patient who developed TAC-induced interstitial lung disease (TAC-ILD) is reported. The Japanese Pharmaceuticals and Medical Devices Agency (PMDA) website was searched for cases of TAC-ILD and its prevalence among all cases of TAC-related adverse events. As for cases of TAC-ILD, its underlying disease, preexisting lung diseases, and fatal outcome were also searched. Literature review of TAC-ILD cases was added. A 65-year-old female RA patient with preexisting bronchiectasis developed near-fatal TAC-ILD. Amelioration of RA, ground-glass opacities in the upper, anterior, and central lung fields, and decrease in peripheral blood lymphocyte count were the major findings in this patient. A search of the PMDA website revealed the following: the prevalence of TAC-ILD was 3 % of all cases of TAC-related adverse events, 56 out of 85 RA cases (66 %), and one out of 15 other cases had a preexisting lung disease; the prevalences of fatal outcome in RA and other cases were 24 and 38 %, respectively. A few cases in the literature had preexisting ILD and developed diffuse alveolar damage. In our case, preexisting bronchiectasis, arthritis remission, newly developed ground-glass opacities (GGOs) in the upper, anterior, and central lung fields, and decrease in peripheral blood lymphocyte count were the major findings. From the search of the PMDA website, about one fourth of the cases with TAC-related lung injury had a fatal outcome, and among RA patients, two thirds had preexisting lung diseases.

Topical tacrolimus for the treatment of severe allergic keratoconjunctivitis in children

Directory of Open Access Journals (Sweden)

Vera Lucia Liendo

Full Text Available ABSTRACT Purpose: Administration of eye drops containing antihistamines or sodium cromoglycate and its derivatives for the treatment of allergic keratoconjunctivitis is often insufficient and usually requires the addition of corticosteroids. However, the risk of complications, such as glaucoma and cataract, limits the use of corticosteroids to short courses, resulting in inadequate long-term treatment response. Immunosuppressive drugs have been considered as a valid alternative to steroids for atopic keratoconjunctivitis and vernal keratoconjunctivitis. This study aimed to evaluate the use of topical tacrolimus (TCL in improving the clinical signs of severe allergic keratoconjuctivitis in children. Methods: Patients with severe allergic keratoconjunctivitis associated with corneal epitheliopathy, gelatinous limbal infiltrates, and/or papillary reaction, along with a history of recurrences and resistance to conventional topical anti-allergy agents, were included in this open clinical trial. Patients were treated with 0.03% TCL ointment for ocular use. A severity score ranging from 0 to 9, with 9 being the highest and 0 being the lowest, was assigned based on signs observed on biomicroscopy prior to and following TCL treatment. Results: Analyses included 66 eyes of 33 patients. After a mean follow-up period of 13 months (range, 12-29 months, TCL treatment significantly decreased the mean symptom score severity for the right (from 5.56 ± 1.18 to 2.76 ± 1.5; p<0.001 and left (from 5.94 ± 1.16 to 2.86 ± 1.64; p<0.001. Conclusion: Topical TCL was effective and significantly improved the clinical signs of allergic keratoconjuctivitis in children. Thus, it is a potential new option for severe and challenging cases of ocular allergy.

Preparation and characterization of a novel polymeric based solid-solid phase change heat storage material

International Nuclear Information System (INIS)

Xi Peng; Gu Xiaohua; Cheng Bowen; Wang Yufei

2009-01-01

Here we reported a two-step procedure for preparing a novel polymeric based solid-solid phase change heat storage material. Firstly, a copolymer monomer containing a polyethylene glycol monomethyl ether (MPEG) phase change unit and a vinyl unit was synthesized via the modification of hydrogen group of MPEG. Secondly, by copolymerization of the copolymer monomer and phenyl ethylene, a novel polymeric based solid-solid phase change heat storage material was prepared. The composition, structure and properties of the novel polymeric based solid-solid phase change material were characterized by IR, 1 H NMR, DSC, WAXD, and POM, respectively. The results show that the novel polymeric based solid-solid phase change material possesses of excellent crystal properties and high phase change enthalpy.

Sildenafil vaginal suppositories: preparation, characterization, in vitro and in vivo evaluation.

Science.gov (United States)

Shanmugam, Srinivasan; Kim, Young-Hun; Park, Jeong-Hee; Im, Ho Taek; Sohn, Young Taek; Kim, Kyeong Soo; Kim, Yong-Il; Yong, Chul Soon; Kim, Jong Oh; Choi, Han-Gon; Woo, Jong Soo

2014-06-01

The main objective was to investigate the in vitro release profile/kinetics, and in vivo plasma pharmacokinetics (PK) and organ biodistribution (BD) of the prepared sildenafil vaginal suppositories (SVS). Suppositories containing 25 mg of sildenafil were prepared by the cream melting technique using Witepsol H-15 as a suppository base. The suppositories were characterized for weight variation, content uniformity, hardness, disintegration time and crystallinity change. The in vitro dissolution in pH 4.5, and in vivo plasma PK and organ BD of sildenafil from SVS in female Sprague Dawley rats, were also investigated. The mean weight variation, content uniformity, hardness and disintegration time of the prepared SVS were 1.127 ± 0.020 g, 98.25 ± 2.50%, 2.5 ± 0.08 kg and 9 ± 1.0 min, respectively. The release of sildenafil from the SVS was more than 90% at 30 min, with a release kinetic of Hixson--Crowell model and non-Fickian diffusion (n = 0.464). The plasma PK study demonstrated a significantly lower Cmax (∼10 times) and AUC0-24 h (∼13 times) of sildenafil in plasma following intravaginal (IVG) administration of suppositories compared to oral (PO) administration of sildenafil solution. Nevertheless, the organ BD study showed a phenomenally higher Cmax (∼40 times) and AUC0-24 h (∼20 times) of sildenafil in uterus following IVG administration of suppositories than PO administration of sildenafil solution. This study demonstrated enhanced sildenafil exposure in the uterus following IVG administration of SVS, which could be used to target the uterus for therapeutic benefits.

Preparation and characterization of uniform-sized chitosan/silver microspheres with antibacterial activities.

Science.gov (United States)

An, Jing; Ji, Zhenxing; Wang, Desong; Luo, Qingzhi; Li, Xueyan

2014-03-01

The chitosan/silver microspheres (CAgMs), which possess effective inhibitory on microorganisms, were prepared by an inverse-emulsification cross-linking method using CS/Ag sol as dispersed phase, whiteruss as continuous phase, and glutaraldehyde as crosslinking agent. The size and shape of CAgMs, greatly affecting their antibacterial activities, were controlled by varying the concentrations of cross-linking agent, emulsifier and CS/Ag colloid. The preparation conditions for obtaining uniform-sized microspheres were optimized. The morphology of CAgMs was characterized by scanning electron microscopy (SEM) and laser particle size analysis. The spherical CAgMs with smooth surface in the mean size of ca. 5 μm exhibited a narrow particle size distribution. Energy Dispersive X-ray spectroscopy (EDX) revealed the elemental composition of the microspheres. Transmission electron micrographs (TEM) and Fourier transform infrared spectroscopy (FTIR) of the microspheres confirmed the formation of silver nanoparticles (AgNPs). The X-ray diffraction (XRD) patterns and UV-Visible diffuse reflectance spectroscopy (UV-vis DRS) of the sample showed that AgNPs with the diameter no more than 20 nm were face-centered cubic crystallites. X-ray photoelectron spectroscopy (XPS) proved that AgO bond existed in the microspheres. Thermogravimetric analysis (TGA) showed that the starting decomposition temperature of CAgMs (ca. 260°C) was much higher than that of CS (ca. 160°C), suggesting that the as-prepared CAgMs possessed better thermal stability than original CS did. Antimicrobial assays were performed using typical Gram bacteria and fungi. The inhibitory effect indicated that the as-prepared microspheres exerted a stronger antibacterial activity as the concentration of the AgNPs is increasing, and the microspheres in smaller size had much better antibacterial activity than those in the larger size. The antimicrobial mechanism of CAgMs was discussed. Copyright © 2013 Elsevier B.V. All

Enantioselective silver nanoclusters: Preparation, characterization and photoluminescence spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Farrag, Mostafa, E-mail: mostafafarrag@aun.edu.eg

2016-09-01

Herein, we report a new wet-synthesis method to separate some water-soluble chiral silver nanoclusters with high yield. The cluster material was obtained by the reduction of silver nitrate with NaBH{sub 4} in the presence of three ligands L-penicillamine (L-pen), D-penicillamine (D-pen) and racemic mixture of penicillamine (rac-pen), functioning as capping ligand. For characterizing all silver cluster samples, the particle size was assessed by transmission electron microscopy (TEM) and powder X-ray diffraction (XRD) and their average chemical formula was determined from thermogravimetric analysis (TGA) and elemental analysis (EA). The particles sizes of all three clusters are 2.1 ± 0.2 nm. The optical properties of the samples were studied by four different methods: UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), photoluminescence spectroscopy (PL) and circular dichroism (CD) spectroscopy. The spectra are dominated by the typical and intense plasmon peak at 486 nm accompanied by a small shoulder at 540 nm. Infrared spectroscopy was measured for the free ligand and protected silver nanoclusters, where the disappearance of the S-H vibrational band (2535–2570 cm{sup −1}) in the silver nanoclusters confirmed anchoring of ligand to the cluster surface through the sulfur atom. PL studies yielded the fluorescent properties of the samples. The main focus of this work, however, lies in the chirality of the particles. For all silver clusters CD spectra were recorded. While for clusters capped with one of the two enantiomers (D- or L-form) typical CD spectra were observed, no significant signals were detected for a racemic ligand mixture. Furthermore, silver clusters show quite large asymmetry factors (up to 3 × 10{sup −4}) in comparison to most other ligand protected clusters. These large factors and bands in the visible range of the spectrum suggest a strong chiral induction from the ligand to the metal core. Textural features of the

Preparation and characterization of enamel coating on pure titanium as a hydrogen penetration barrier

Energy Technology Data Exchange (ETDEWEB)

Tao, Jie, E-mail: taojie@nuaa.edu.cn [College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 210016 (China); Guo, Xunzhong [College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 210016 (China); Huang, Zhendong [Graduate School of Human and Environmental Studies, Kyoto University, oshida-Nihonmatsu-Cho, Sakyo-Ku, Kyoto shi 606-8501 (Japan); Liu, Hongbing [Shanghai Aircraft Manufacturing Co,. Ltd, Shanghai 200436 (China); Wang, Tao [College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, Jiangsu 210016 (China)

2013-06-15

Highlights: ► The enamel coating was prepared by spin-coating and enameling method. ► The dense enamel coatings were chemically bonded with TA1 substrate. ► The coatings possessed better thermal shock resistance property. ► The coatings had excellent ball-dropping impact properties. ► The enamel coating exhibited a good barrier effect to hydrogen isotope penetration. -- Abstract: The enamel coating with a thickness of 90–110 × 10{sup −6} m was prepared on TA1 substrate by spin-coating and enameling to solve the problems of hydrogen isotope penetration for commercial pure titanium TA1. The microstructure and the interfacial morphology of the samples were characterized respectively by X-ray diffraction, optical and scanning electron microscopy. The profiles of main elements at the interface were analyzed by EDS line-scanning. The experimental results indicated that the dense enamel coatings were chemically bonded with TA1 substrate, and possessed better thermal shock resistance and ball-dropping impact properties. It was concluded from the results of hydrogen charging test with Vickers microhardness measurement and deuterium penetration experiments that the as-prepared dense enamel coating exhibited a good barrier effect to hydrogen isotope penetration.

Preparation and characterization of fluorophenylboronic acid-functionalized affinity monolithic columns for the selective enrichment of cis-diol-containing biomolecules.

Science.gov (United States)

Li, Qianjin; Liu, Zhen

2015-01-01

Boronate affinity monolithic columns have been developed into an important means for the selective recognition and capture of cis-diol-containing biomolecules, such as glycoproteins, nucleosides and saccharides. The ligands of boronic acids are playing an important role in boronate affinity monolithic columns. Although several boronate affinity monoliths with high affinity toward cis-diol-containing biomolecules have been reported, only few publications are focused on their detailed procedures for preparation and characterization. This chapter describes in detail the preparation and characterization of a boronate affinity monolithic column applying 2,4-difluoro-3-formyl-phenylboronic acid (DFFPBA) as a ligand. The DFFPBA-functionalized monolithic column not only exhibited an ultrahigh boronate affinity toward cis-diol-containing biomolecules, but also showed great potential for the selective enrichment of cis-diol-containing biomolecules in real samples.

Structural characterization of pharmaceutical heparins prepared from different animal tissues.

Science.gov (United States)

Fu, Li; Li, Guoyun; Yang, Bo; Onishi, Akihiro; Li, Lingyun; Sun, Peilong; Zhang, Fuming; Linhardt, Robert J

2013-05-01

Although most pharmaceutical heparin used today is obtained from porcine intestine, heparin has historically been prepared from bovine lung and ovine intestine. There is some regulatory concern about establishing the species origin of heparin. This concern began with the outbreak of mad cow disease in the 1990s and was exacerbated during the heparin shortage in the 2000s and the heparin contamination crisis of 2007-2008. Three heparins from porcine, ovine, and bovine were characterized through state-of-the-art carbohydrate analysis methods with a view profiling their physicochemical properties. Differences in molecular weight, monosaccharide and disaccharide composition, oligosaccharide sequence, and antithrombin III-binding affinity were observed. These data provide some insight into the variability of heparins obtained from these three species and suggest some analytical approaches that may be useful in confirming the species origin of a heparin active pharmaceutical ingredient. Copyright © 2013 Wiley Periodicals, Inc.

Preparation and Characterization of Lecithin-Nano Ni/Fe for Effective Removal of PCB77

OpenAIRE

Shu Ding; Lin Zhao; Yun Qi; Qian-qian Lv

2014-01-01

A kind of combined material (named lecithin-nano Ni/Fe) that is composed of lecithin and nanoscale Ni/Fe bimetal was synthesized via microemulsion method. The efficacy of such an original material was tested using 3,3′,4,4′-tetrachlorobiphenyl (PCB77) as target pollutant. A microemulsion system was optimized as template to prepare Ni/Fe nanoparticles, which was followed by an insite loading process with the deposition of lecithin carrier. It was proved by the characterization that subtle Ni/F...

Post-Transplant Cyclophosphamide and Tacrolimus-Mycophenolate Mofetil Combination Prevents Graft-versus-Host Disease in Allogeneic Peripheral Blood Hematopoietic Cell Transplantation from HLA-Matched Donors.

Science.gov (United States)

Carnevale-Schianca, Fabrizio; Caravelli, Daniela; Gallo, Susanna; Coha, Valentina; D'Ambrosio, Lorenzo; Vassallo, Elena; Fizzotti, Marco; Nesi, Francesca; Gioeni, Luisa; Berger, Massimo; Polo, Alessandra; Gammaitoni, Loretta; Becco, Paolo; Giraudo, Lidia; Mangioni, Monica; Sangiolo, Dario; Grignani, Giovanni; Rota-Scalabrini, Delia; Sottile, Antonino; Fagioli, Franca; Aglietta, Massimo

2017-03-01

Allogeneic hematopoietic cell transplant (HCT) remains the only curative therapy for many hematologic malignancies but it is limited by high nonrelapse mortality (NRM), primarily from unpredictable control of graft-versus-host disease (GVHD). Recently, post-transplant cyclophosphamide demonstrated improved GVHD control in allogeneic bone marrow HCT. Here we explore cyclophosphamide in allogeneic peripheral blood stem cell transplantation (alloPBSCT). Patients with high-risk hematologic malignancies received alloPBSCT from HLA-matched unrelated/related donors. GVHD prophylaxis included combination post-HCT cyclophosphamide 50 mg/kg (days +3 and +4) and tacrolimus/mofetil mycophenolate (T/MMF) (day +5 forward). The primary objective was the cumulative incidence of acute and chronic GVHD. Between March 2011 and May 2015, 35 consecutive patients received the proposed regimen. MMF was stopped in all patients at day +28; the median discontinuation of tacrolimus was day +113. Acute and chronic GVHD cumulative incidences were 17% and 7%, respectively, with no grade IV GVHD events, only 2 patients requiring chronic GVHD immunosuppression control, and no deaths from GVHD. Two-year NRM, overall survival, event-free survival, and chronic GVHD event-free survival rates were 3%, 77%, 54%, and 49%, respectively. The graft-versus-tumor effect was maintained as 5 of 15 patients (33%) who received HCT with evidence of disease experienced further disease response. A post-transplant cyclophosphamide + T/MMF combination strategy effectively prevented acute and chronic GVHD after alloPBSCT from HLA-matched donors and achieved an unprecedented low NRM without losing efficacy in disease control or impaired development of the graft-versus-tumor effect. This trial is registered at clinicaltrials.gov as NCT02300571. Copyright © 2017 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

Preparation and electrochemical characterization of polyaniline/activated carbon composites as an electrode material for supercapacitors.

Science.gov (United States)

Oh, Misoon; Kim, Seok

2012-01-01

Polyaniline (PANI)/activated carbon (AC) composites were prepared by a chemical oxidation polymerization. To find an optimum ratio between PANI and AC which shows superior electrochemical properties, the preparation was carried out in changing the amount of added aniline monomers. The morphology of prepared composites was investigated by scanning electron microscopy (SEM) and transmission electron microscope (TEM). The structural and thermal properties were investigated by Fourier transform infrared spectra (FT-IR) and thermal gravimetric analysis (TGA), respectively. The electrochemical properties were characterized by cyclic voltammetry (CV). Composites showed a summation of capacitances that consisted of two origins. One is double-layer capacitance by ACs and the other is faradic capacitance by redox reaction of PANI. Fiber-like PANIs are coated on the surface of ACs and they contribute to the large surface for redox reaction. The vacancy among fibers provided the better diffusion and accessibility of ion. High capacitances of composites were originated from the network structure having vacancy made by PANI fibers. It was found that the composite prepared with 5 ml of aniline monomer and 0.25 g of AC showed the highest capacitance. Capacitance of 771 F/g was obtained at a scan rate of 5 mV/s.

Preparation, Characterization, and UV Irradiation of Mars Soil Analogues Under Simulated Martian Conditions to Support Detection of Molecular Biomarkers

Science.gov (United States)

Fornaro, T.; Brucato, J. R.; ten Kate, I. L.; Siljeström, S.; Steele, A.; Cody, G. D.; Hazen, R. M.

2018-04-01

We present laboratory activities of preparation, characterization, and UV irradiation processing of Mars soil analogues, which are key to support both in situ exploration and sample return missions devoted to detection of molecular biomarkers on Mars.

Preparation and characterization of endohedral metallofullerenes

International Nuclear Information System (INIS)

Fuchs, D.

1996-03-01

The successful preparation of endohedral metallofullerenes in amounts of mg's is strongly hampered by the fact that the commonly use procedure is extremely time consuming. We have dramatically changed this by several improvements. Firstly, the development of a new extraction scheme, based on a selective solubility of M C 82 and the use of special chromatographic columns allow a more rapid purification of these fullerenes. Further, significant advancement has been achieved by the discovery of the catalytic influence of various boron compounds on the yield of M C 82 during coevaporation. The production of macroscopic amounts of M C 82 (mg-scale) is now possible in a much shorter time thus opening the door to series of new investigations including the characterization of endohedral metallofullerenes. Chromatographic retention relationships between endohedral metallofullerenes M C 82 (M=Y, La, Ce and Gd) and a [2-(1-pyrenyl) ethyl]silyl-silica stationary phase were studied in detail and are discussed in comparison with those of empty fullerenes. The elution behavior of metallofullerenes reflects the polar nature of these molecules and allows a rough determination of dipole moments for these species. Furthermore for the first time the dipole moment of La C 82 was investigated by direct dipole moment measurements in solution (CS 2 ). These results are consistent with those obtained form retention relationships. The dipole moments of M C 82 show a characteristic trend with respect to the ionic radius (M +3 6 ) of the doped metal and indicate that the metal is coordinated to a facing carbon hexagon. Such a fixed position at the inner side of the fullerene cage is also consistent with EPR-experiments and makes a thermal activated hopping process of the metal ion inside the fullerene cage as in the case of Sc 3 C 82 and Sc 2 C 82 imporable. (orig./WL)

Preparation, characterization and relative bioavailability of oral elemene o/w microemulsion

Science.gov (United States)

Zeng, Zhaowu; Zhou, Guanglin; Wang, Xiaoli; Huang, Eric Zhijian; Zhan, Xiaori; Liu, Jun; Wang, Shuling; Wang, Anming; Li, Haifeng; Pei, Xiaolin; Xie, Tian

2010-01-01

The objective was to develop an elemene oil/water (o/w) microemulsion and evaluate its characteristics and oral relative bioavailability in rats. Elemene was used as the oil phase and drug, polysorbate 80 as a surfactant along with ethanol, propylene glycol, and glycerol as the cosurfactants. The microemulsion was prepared by mixing method, or ultrasonication method in an ultrasonic bath. Its three-dimensional response surface diagram was drawn by Mathcad software. The microemulsion was characterized by visual observation, cross-polarized microscopy, size, zeta potential, acidity, viscosity, and surface tension measurement. The drug content and entrapment efficiency were determined by ultra fast liquid chromatography (UFLC) and liquid surface method. Blood was drawn from rats at different time points after oral administration of an elemene microemulsion or a commercial elemene emulsion for measurement of the drug in plasma by UFLC to establish the pharmacokinetic parameters and relative bioavailability. The elemene microemulsion as a clarified and isotropic system containing 1% elemene (w/v), 5% ethanol (v/v), 15% propylene glycol (v/v), 15% glycerol (v/v), and 5% polysorbate 80 (w/v), was characterized as (57.7 ± 2.8) nm in size, 0.485 ± 0.032 in polydispersity index, (3.2 ± 0.4) mv in zeta potential, (5.19 ± 0.08) in pH, 6 mpa·s in viscosity, (31.8 ± 0.3) mN·m−1 in surface tension, (8.273 ± 0.018) mg·mL−1 in content of β-elemene, and (99.81 ± 0.24)% in average entrapment efficiency. The area under the concentration-time curves from 0 h to 24 h (AUC0→24h) of the elemene microemulsion and commercial elemene emulsion were integrated to be 3.092 mg·h·L−1 and 1.896 mg·h·L−1 respectively, yielding a relative bioavailability of 163.1%. The present study demonstrates the elemene microemulsion as a new formulation with ease of preparation, high entrapment efficiency, excellent clarity, good stability, and improved bioavailability. PMID:20856831

Preparation, characterization and relative bioavailability of oral elemene o/w microemulsion.

Science.gov (United States)

Zeng, Zhaowu; Zhou, Guanglin; Wang, Xiaoli; Huang, Eric Zhijian; Zhan, Xiaori; Liu, Jun; Wang, Shuling; Wang, Anming; Li, Haifeng; Pei, Xiaolin; Xie, Tian

2010-09-07

The objective was to develop an elemene oil/water (o/w) microemulsion and evaluate its characteristics and oral relative bioavailability in rats. Elemene was used as the oil phase and drug, polysorbate 80 as a surfactant along with ethanol, propylene glycol, and glycerol as the cosurfactants. The microemulsion was prepared by mixing method, or ultrasonication method in an ultrasonic bath. Its three-dimensional response surface diagram was drawn by Mathcad software. The microemulsion was characterized by visual observation, cross-polarized microscopy, size, zeta potential, acidity, viscosity, and surface tension measurement. The drug content and entrapment efficiency were determined by ultra fast liquid chromatography (UFLC) and liquid surface method. Blood was drawn from rats at different time points after oral administration of an elemene microemulsion or a commercial elemene emulsion for measurement of the drug in plasma by UFLC to establish the pharmacokinetic parameters and relative bioavailability. The elemene microemulsion as a clarified and isotropic system containing 1% elemene (w/v), 5% ethanol (v/v), 15% propylene glycol (v/v), 15% glycerol (v/v), and 5% polysorbate 80 (w/v), was characterized as (57.7 ± 2.8) nm in size, 0.485 ± 0.032 in polydispersity index, (3.2 ± 0.4) mv in zeta potential, (5.19 ± 0.08) in pH, 6 mpa·s in viscosity, (31.8 ± 0.3) mN·m(-1) in surface tension, (8.273 ± 0.018) mg·mL(-1) in content of β-elemene, and (99.81 ± 0.24)% in average entrapment efficiency. The area under the concentration-time curves from 0 h to 24 h (AUC(0→24h)) of the elemene microemulsion and commercial elemene emulsion were integrated to be 3.092 mg·h·L(-1) and 1.896 mg·h·L(-1) respectively, yielding a relative bioavailability of 163.1%. The present study demonstrates the elemene microemulsion as a new formulation with ease of preparation, high entrapment efficiency, excellent clarity, good stability, and improved bioavailability.

Manganese ferrite prepared using reverse micelle process: Structural and magnetic properties characterization

Energy Technology Data Exchange (ETDEWEB)

Hashim, Mohd, E-mail: md.hashim09@gmail.com [Department of Physics, Aligarh Muslim University, Aligarh 202002 (India); Shirsath, Sagar E. [Spin Device Technology Centre, Department of Engineering, Shinshu University, Nagano 380-8553 (Japan); Meena, S.S. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Mane, M.L. [Department of Physics, S.G.R.G. Shinde Mahavidyalaya, Paranda 413502, MS (India); Kumar, Shalendra [School of Materials Science and Engineering, Changwon National University, Changwon, Gyeongnam 641-773 (Korea, Republic of); Bhatt, Pramod [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Kumar, Ravi [Centre for Material Science Engineering, National Institute of Technology, Hamirpur, HP (India); Prasad, N.K.; Alla, S.K. [Deptartment of Metallurgical Engineering, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005 (India); Shah, Jyoti; Kotnala, R.K. [National Physical Laboratory (CSIR), Dr. K.S. Krishnan Road, New Delhi 110012 (India); Mohammed, K.A. [Department of Mathematics & Physics Sciences, College of Arts and Sciences, University of Nizwa, Nizwa (Oman); Şentürk, Erdoğan [Department of Physics, Sakarya University, Esentepe, 54187 Sakarya (Turkey); Alimuddin [Department of Physics, Aligarh Muslim University, Aligarh 202002 (India)

2015-09-05

Highlights: • Preparation of Mn{sup 3+} substituted MnFe{sub 2}O{sub 4} ferrite by Reverse microemulsion process. • Characterization by XRD, SEM, VSM, Mössbauer spectroscopy and dielectric measurements techniques. • Magnetic properties of MnFe{sub 2}O{sub 4} enhanced after Mn{sup 3+} substitution. • The dielectric constant and ac conductivity increased with Mn{sup 3+} substitution. - Abstract: Reverse microemulsion process was employed to prepare of nanocrystalline Mn{sup 3+} substituted MnFe{sub 2−x}Mn{sub x}O{sub 4} ferrites. The structural, magnetic and dielectric properties were studied for different concentrations of Mn{sup 3+}. The structural and microstructural properties were analyzed using X-ray diffraction technique (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy techniques. The phase identification of the materials was studied by Rietveld refined XRD patterns which reveals single phase with cubic symmetry for the samples. The lattice parameters were ranged in between 8.369 and 8.379 Å and do not show any significant change with the substitution of Mn{sup 3+}. The average particles size was found to be around 11 ± 3 nm. Magnetization results obtained from the vibrating sample magnetometer (VSM) confirm that the substitution of Mn{sup 3+} in MnFe{sub 2}O{sub 4} ferrite caused an increase in the saturation magnetization and coercivity. The dependence of Mössbauer parameters on Mn{sup 3+} substitution has been analyzed. Magnetic behavior of the samples were also studied at field cooled (FC) and zero field cooled (ZFC) mode. The dependence of Mössbauer parameters on Mn{sup 3+} substitution was also analyzed. All the magnetic characterization shows that Mn{sup 3+} substitution enhance the magnetic behavior of MnFe{sub 2}O{sub 4} ferrite nanoparticles.

MRI in seven cases of tacrolimus (FK-506) encephalopathy: utility of FLAIR and diffusion-weighted imaging

Energy Technology Data Exchange (ETDEWEB)

Furukawa, M. [Dept. of Radiology, Yamaguchi University School of Medicine, Ube (Japan); Dept. of Radiology, Hokkaido University School of Medicine, Sapporo (Japan); Terae, S.; Chu, B.C.; Kaneko, K.; Kamada, H.; Miyasaka, K. [Dept. of Radiology, Hokkaido University School of Medicine, Sapporo (Japan)

2001-08-01

We assessed the utility of fluid-attenuated inversion-recovery (FLAIR) and diffusion-weighted (DWI) images in investigation of tacrolimus (FK-506) encephalopathy, and to see whether we could predict its cause from clinical and imaging data. In seven patients with presumed FK-506 toxicity the areas involved on MRI were similar to those in cyclosporin A (CsA) toxicity. The abnormal signal was most evident on FLAIR in all cases. In three of four patients who underwent DWI, no diffusion abnormalities were detected; in the remaining patient, increased diffusion was seen in the deep white matter bilaterally on the apparent diffusion coefficient map, consistent with the findings on T2-weighted spin-echo and FLAIR images. Five of the six patients for whom we had clinical data showed sudden changes in electrolyte or fluid equilibrium due to diarrhoea, a polyuria or oliguria one day before or on the day of onset of the central nervous system disturbances. We speculate that FK-506 encephalopathy is triggered by the disturbance of the electrolyte and/or fluid equilibrium, given a certain serum level of FK-506. (orig.)

MRI in seven cases of tacrolimus (FK-506) encephalopathy: utility of FLAIR and diffusion-weighted imaging

International Nuclear Information System (INIS)

Furukawa, M.; Terae, S.; Chu, B.C.; Kaneko, K.; Kamada, H.; Miyasaka, K.

2001-01-01

We assessed the utility of fluid-attenuated inversion-recovery (FLAIR) and diffusion-weighted (DWI) images in investigation of tacrolimus (FK-506) encephalopathy, and to see whether we could predict its cause from clinical and imaging data. In seven patients with presumed FK-506 toxicity the areas involved on MRI were similar to those in cyclosporin A (CsA) toxicity. The abnormal signal was most evident on FLAIR in all cases. In three of four patients who underwent DWI, no diffusion abnormalities were detected; in the remaining patient, increased diffusion was seen in the deep white matter bilaterally on the apparent diffusion coefficient map, consistent with the findings on T2-weighted spin-echo and FLAIR images. Five of the six patients for whom we had clinical data showed sudden changes in electrolyte or fluid equilibrium due to diarrhoea, a polyuria or oliguria one day before or on the day of onset of the central nervous system disturbances. We speculate that FK-506 encephalopathy is triggered by the disturbance of the electrolyte and/or fluid equilibrium, given a certain serum level of FK-506. (orig.)

Preparation and characterization of epitaxially grown unsupported yttria-stabilized zirconia (YSZ) thin films

Energy Technology Data Exchange (ETDEWEB)

Götsch, Thomas; Mayr, Lukas [Institute of Physical Chemistry, Universität Innsbruck, A-6020 Innsbruck (Austria); Stöger-Pollach, Michael [University Service Center for Transmission Electron Microscopy (USTEM), Vienna University of Technology, A-1040 Vienna (Austria); Klötzer, Bernhard [Institute of Physical Chemistry, Universität Innsbruck, A-6020 Innsbruck (Austria); Penner, Simon, E-mail: simon.penner@uibk.ac.at [Institute of Physical Chemistry, Universität Innsbruck, A-6020 Innsbruck (Austria)

2015-03-15

Highlights: • Preparation of unsupported yttrium-stabilized zirconia films. • Control of ordering and epitaxy by temperature of deposition template. • Adjustment of film defectivity by deposition and post-oxidation temperature. • Reproducibility of target stoichiometry in the deposited films. • Lateral and vertical chemical homogeneity. - Abstract: Epitaxially grown, chemically homogeneous yttria-stabilized zirconia thin films (“YSZ”, 8 mol% Y{sub 2}O{sub 3}) are prepared by direct-current sputtering onto a single-crystalline NaCl(0 0 1) template at substrate temperatures ≥493 K, resulting in unsupported YSZ films after floating off NaCl in water. A combined methodological approach by dedicated (surface science) analytical characterization tools (transmission electron microscopy and diffraction, atomic force microscopy, angle-resolved X-ray photoelectron spectroscopy) reveals that the film grows mainly in a [0 0 1] zone axis and no Y-enrichment in surface or bulk regions takes place. In fact, the Y-content of the sputter target is preserved in the thin films. Analysis of the plasmon region in EEL spectra indicates a defective nature of the as-deposited films, which can be suppressed by post-deposition oxidation at 1073 K. This, however, induces considerable sintering, as deduced from surface morphology measurements by AFM. In due course, the so-prepared unsupported YSZ films might act as well-defined model systems also for technological applications.

Preparation and Characterization of Highly Aligned Carbon Nanotubes/Polyacrylonitrile Composite Nanofibers

Directory of Open Access Journals (Sweden)

Yanhua Song

2017-01-01

Full Text Available In the electrospinning process, a modified parallel electrode method (MPEM, conducted by placing a positively charged ring between the needle and the parallel electrode collector, was used to fabricate highly aligned carbon nanotubes/polyacrylonitrile (CNTs/PAN composite nanofibers. Characterizations of the samples—such as morphology, the degree of alignment, and mechanical and conductive properties—were investigated by a combination of scanning electron microscopy (SEM, transmission electron microscopy (TEM, universal testing machine, high-resistance meter, and other methods. The results showed the MPEM could improve the alignment and uniformity of electrospun CNTs/PAN composite nanofibers, and enhance their mechanical and conductive properties. This meant the successful preparation of highly aligned CNT-reinforced PAN nanofibers with enhanced physical properties, suggesting their potential application in appliances and communication areas.

Preparation and characterization of a radioiodinated bacterial lipopolysaccharide

Energy Technology Data Exchange (ETDEWEB)

Ulevitch, R J [Scripps Clinic and Research Foundation, La Jolla, Calif. (USA)

1978-03-01

Radioiodinated lipopolysaccharide (LPS) from E.coli 0111:B4 has been prepared by reacting p-OH methylbenzimidate with 0111:B4 LPS at alkaline pH. The resulting LPS derivative has been radiolabeled with Na/sup 125/I. Specific activities of up to 5..mu..Ci/..mu..g LPS may be obtained by this technique and significantly the preparation of the radioiodinated LPS does not alter the biophysical, immunologic or biologic properties of 0111:B4 LPS. The methods described here are applicable to any 'protein free' LPS preparation containing primary amino groups.

Metabolic differences of tacrolimus between patients with combined liver and kidney transplantation and patients with single liver or single kidney transplantation%他克莫司在肝肾联合移植患者与单纯肝移植及单纯肾移植患者之间代谢的差异

Institute of Scientific and Technical Information of China (English)

鲁燕侠; 邹德勇; 王新; 严莲珍

2017-01-01

目的 探讨他克莫司在不同器官移植受者间的代谢差异.方法 采用回顾性研究方法,选择武警总医院器官移植中心2002年1月至2012年8月收治的器官移植患者30例,分为肝肾联合移植(SLK)组、单纯肝移植组和单纯肾移植组,每组10例.SLK组与单纯肝移植组两组给药方案相同,术中均给予甲泼尼龙注射液,术后采用他克莫司+吗替麦考酚酯+泼尼松三联免疫抑制治疗方案.术后第1天给予他克莫司,初始剂量0.06 mg·kg-1·d-1,分2次服用,术后第3天开始检测他克莫司全血谷浓度;单纯肾移植组术后2~4 d给予他克莫司,初始剂量为0.15 mg·kg-1·d-1,分2次服用,服药3 d后开始监测他克莫司全血谷浓度.比较3组移植术后1个月内他克莫司的服药剂量和全血谷浓度.结果 术后1个月SLK组口服他克莫司剂量(μg·kg-1·d-1:74.78±32.65比80.62±24.02、85.58±16.78)及血药浓度监测值(μg/L:6.64±2.73比7.50±3.08、7.46±3.20)均低于单纯肝移植组和单纯肾移植组,但组间比较差异无统计学意义(均P>0.05).结论 SLK中移植肝对于移植肾的保护作用可能与术后时间有关.术后1个月内移植肝对于移植肾未显示出保护作用.%Objective To investigate the metabolic differences of Tacrolimus in different transplant recipients. Methods A retrospective study was conducted, 30 patients of the organ transplant admitted to organ transplantation center of General Hospital of Chinese People's Armed Police Forces from January 2002 to August 2012 were enrolled, and they were divided into combined liver and kidney transplant (SLK) group, single liver transplant group and single renal transplant group, 10 cases in each group. The SLK group and the simple liver transplantation group were given the same drug regimen, methylprednisolone injection was given during operation, and tacrolimus+ mycophenolate mofetil+ prednisone triple immunosuppressive therapy was taken after operation, on

Preparation and Characterization of Nonylphenol Magnetic Molecularly Imprinted Polymer

International Nuclear Information System (INIS)

Chen, F. Y.; Ba, S. P.; Tang, Y. B.; Wang, X. G.

2015-01-01

Nonylphenol (NP) is a toxic xenobiotic compound classified as an endocrine disrupter, which can interface with the hormonal system of numerous organisms, and then cause a series of pathological changes. It is of great significance to remove nonyl phenol from the environment. In this paper, an effective method for the preparation of molecularly imprinted nanoparticles was reported. Firstly, Fe/sub 3/O/sub 4/ at the rate SiO/sub 2/ magnetic carrier material modified by trimethoxysilane was achieved through three-step reaction. After that, the selective magnetic molecularly imprinted polymer sorbent for NP (Fe/sub 3/O/sub 4/ at the rate SiO/sub 2/-MIP) was synthesized by surface molecular imprinting technique, using NP as template, 4-vinyl pyridine(4-Vpy) as functional monomers, ethylene glycol dimethacrylate (EGDMA) as cross linker and azobisisobutyronitrile (AIBN) as initiator. The morphous, composition, structure and performance of polymer adsorbent was characterized by SEM, TEM, FT-IR, XRD, EDS, VSM and nitrogen adsorption-desorption techniques. The results indicated that the polymer adsorbent was successfully prepared. The size of the polymer particle was about 50 nm, the aperture on the surface was 3.71 nm, the BET specific surface area was 61.80 m/sup 2/g and the Langmuir specific surface area was 101.24 m/sup 2/g. The selective adsorption rate for NP of 0.5 mmol/L attained value of 86.5%, and for NP with low concentration (less than 2.0 mg/L), the selective adsorption rate reached more than 90%. The synthesized magnetic molecularly imprinted polymer had higher selective recognition ability towards the template molecule nonylphenol. It has good magnetism and can be rapidly separated after being employed by using adscititious magnetic field. It has potential application value in treatment and enrichment of nonylphenol. (author)

Preparation and characterization of electrospun poly(phthalazinone ether nitrile ketone) membrane with novel thermally stable properties

Energy Technology Data Exchange (ETDEWEB)

Wang, Gang; Zhang, Hao; Qian, Bingqing [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Wang, Jinyan, E-mail: wangjinyan@dlut.edu.cn [Department of Polymer Science and Materials, Dalian University of Technology, Dalian 116024 (China); Jian, Xigao [Department of Polymer Science and Materials, Dalian University of Technology, Dalian 116024 (China); Qiu, Jieshan, E-mail: jqiu@dlut.edu.cn [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China)

2015-10-01

Highlights: • Poly (phthalazinone ether nitrile ketone) (PPENK) was used to successfully prepare nanofiber membranes by electrospinning. • Electrospun membrane exhibits a good thermostability. • Electrospun membrane. - Abstract: Electrospun nanofibrous membranes have several applications because of their excellent properties, such as high porosity, small fiber diameter, and large surface area. However, high-temperature resistant electrospun membranes remain a challenge because of the absence of precursors that offer spinnability, scalability, and superior thermal stability. In this study, poly(phthalazinone ether nitrile ketone) (PPENK) was used to successfully prepare nanofiber membranes by electrospinning. Electrospun PPENK membranes were characterized by scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and tensile stress–strain tests. Results indicated that the prepared electrospun membranes had a very high glass transition temperature, superior chemical resistance, and excellent mechanical strength. These desirable properties broaden their potential application in membranes and treatment of various hot fluid streams without strict temperature control.

Carbon nanotube/platinum nanoparticle nanocomposites: preparation, characterization and application in electro oxidation of alcohols

International Nuclear Information System (INIS)

Kalinke, Adir H.; Zarbin, Aldo J. G.

2014-01-01

The synthesis and characterization of different platinum nanoparticle/ carbon nanotube nanocomposite samples are described along with the application of these nanocomposites as electrocatalysts for alcohol oxidation. Samples were prepared by a biphasic system in which platinum nanoparticles (Pt-NPs) are synthesized in situ in contact with a carbon nanotube (CNT) dispersion. Variables including platinum precursor/CNT ratio, previous chemical treatment of carbon nanotubes, and presence or absence of a capping agent were evaluated and correlated with the characteristic of the synthesized materials. Samples were characterized by Raman spectroscopy, X-ray diffraction, thermogravimetric analysis and transmission electron microscopy. Glassy carbon electrodes were modified by the nanocomposite samples and evaluated as electrocatalysts for alcohol oxidation. Current densities of 56.1 and 79.8/104.7 mA cm -2 were determined for the oxidation of methanol and ethanol, respectively. (author)

Preparation and characterization of zinc sulphide nanocomposites based on acrylonitrile butadiene rubber

Science.gov (United States)

Ramesan, M. T.; Nihmath, A.; Francis, Joseph

2013-06-01

Rubber composite based on acrylonitrile butadiene rubber (NBR) reinforced with nano zinc sulphide (ZnS) have been prepared via vulcanization process and characterized by several techniques. Processing characteristics such as scorch time, optimum cure time decreases with increase in concentration of nano filler in acrylonitrile butadiene rubber. Mechanical properties such as tensile and tear strength increases with increase in concentration of nano filler up to 7 phr of loading thereafter the value decreases, whereas hardness, and flame resistance increases with the dosage of fillers. These enhanced properties are due to the homogenous dispersion of nano fillers in NBR matrix, which is evidenced from the structure that evaluated using X-ray diffraction (XRD) and scanning electron microscopy (SEM).

A search for new CYP3A4 variants as determinants of tacrolimus dose requirements in renal-transplanted patients.

Science.gov (United States)

Tavira, Beatriz; Coto, Eliecer; Diaz-Corte, Carmen; Alvarez, Victoria; López-Larrea, Carlos; Ortega, Francisco

2013-08-01

The CYP3A5*3 and CYP3A4*1B alleles have been related with tacrolimus (Tac) dose requirements. The rare CYP3A4*22 variant has also been associated with a significantly lower Tac dose. We genotyped the three single-nucleotide polymorphisms in 206 kidney-transplanted patients who received Tac as the primary immunosuppressor. CYP3A5*1 and CYP3A4*1B allele carriers received a significantly higher Tac dose (PCYP3A4*22 genotypes, either nominally or according to the CYP3A5 genotype (expressers vs. nonexpressers). Sequencing of CYP3A4 coding exons in a total of 15 patients revealed only one nonreported missense change (p.P227>T) in one patient. We concluded that CYP3A5*3 and CYP3A4*1B were the main determinants of the Tac dose-adjusted blood concentration in our cohort of renal-transplanted patients.

Preparation by a facile method and characterization of amorphous and crystalline nickel sulfide nanophases

Energy Technology Data Exchange (ETDEWEB)

Nagaveena, S., E-mail: nagaveena3@gmail.com; Mahadevan, C.K.

2014-01-05

Highlights: • Amorphous NiS, and crystalline NiS{sub 1.03}, β-NiS and α-NiS nanophases prepared. • Simple microwave assisted solvothermal method used. • Nanoparticles with low grain size, high phase purity and homogeneity obtained. • High coercivity observed indicates the applicability in data storage devices. -- Abstract: A simple solvothermal route using a domestic microwave oven has been developed to prepare the prominent nickel sulfide nanophases (amorphous NiS, and crystalline NiS{sub 1.03}, β-NiS and α-NiS). The prepared nanophases have been characterized chemically, structurally, optically, electrically, and magnetically by the available methods like thermogravimetric and differential thermal analyses, X-ray powder diffraction analysis, scanning electron microscopic, and transmission electron microscopic analyses, energy dispersive X-ray spectroscopic, Fourier transform-infrared spectral, UV–Vis spectral and photoluminescence spectral analyses, AC and DC electrical measurements at various temperatures in the range 40–150 °C, and vibrating sample magnetometric measurements. The average particle sizes obtained through transmission electron microscopic analysis are 15, 17, 18, 20 nm respectively for the amorphous NiS, NiS{sub 1.03}, β-NiS and α-NiS nanophases. Results obtained in the present study indicates that the method adopted is found to be an effective and economical one for preparing these nanophases with high purity, reduced size, homogeneity, and useful optical, electrical and magnetic properties.

Preparation and characterization of a novel hyperbranched polyphosphate ester

Energy Technology Data Exchange (ETDEWEB)

Chen, Sufang [College of Chemistry, Chemical Engineering and Material Science, Soochow University, Suzhou, Jiangsu Province 215123 (China); Key Laboratory for Green Chemical Process of Ministry of Education, Wuhan Institute of Technology, Wuhan, Hubei 430073 (China); Zhang, Daohong, E-mail: zhangdh@163.com [Key Laboratory of Catalysis and Materials Science of the State Ethnic Affairs Commission and Ministry of Education, South-Central University for Nationalities, Wuhan, Hubei Province 430074 (China); Cheng, Xinjian; Li, Tingcheng; Zhang, Aiqing [Key Laboratory of Catalysis and Materials Science of the State Ethnic Affairs Commission and Ministry of Education, South-Central University for Nationalities, Wuhan, Hubei Province 430074 (China); Li, Jinlin [College of Chemistry, Chemical Engineering and Material Science, Soochow University, Suzhou, Jiangsu Province 215123 (China); Key Laboratory of Catalysis and Materials Science of the State Ethnic Affairs Commission and Ministry of Education, South-Central University for Nationalities, Wuhan, Hubei Province 430074 (China)

2012-11-15

Polyphosphate esters have received a great deal of attention due to their important application in biomaterials field. Hyperbranched structure of polymers may support unique properties, including low viscosity and perfect intrinsic property. We report here three generations of hyperbranched polyphosphate esters (HPPE-1, HPPE-2 and HPPE-3) synthesized from a dehydrochlorination reaction between 1,3,5-tris(2-hydroxyethyl)cyanuric acid (THEIC) and phosphorus oxychloride (POCl{sub 3}), and characterize their chemical structures by FT-IR, {sup 1}H NMR, {sup 13}C NMR, {sup 31}P NMR and 2D NMR ({sup 1}H,{sup 1}H-COSY and {sup 13}C, {sup 1}H-HSQC) techniques. Degrees of branching of HPPE-1, HPPE-2 and HPPE-3 are 0.90, 0.91 and 0.87 respectively from the calculation of their {sup 13}C NMR spectra. Molecular weights of HPPE-1, HPPE-2 and HPPE-3 are m/z 1530, 1768 and 2750 from their MALDI-TOF-MS spectra. Study on thermal degradation mechanism of the HPPE-2 by a 3D FT-IR/TG technology shows that there are two cracking processes of its molecular chains, including the thermal degradation of hydroxylethyl-ended groups, nitrogen heterocycle and -CH{sub 2}CH{sub 2}- groups of HPPE-2. -- Highlights: Black-Right-Pointing-Pointer We prepared three novel hyperbranched polyphosphate esters (HPPE-1, HPPE-2 and HPPE-3). Black-Right-Pointing-Pointer Their chemical structures were characterized by FT-IR, 1D NMR and 2D NMR techniques. Black-Right-Pointing-Pointer Their degrees of branching were over 0.87. Black-Right-Pointing-Pointer TG-FTIR was used to study thermal degradation mechanism of the HPPE-2.

Paraquat-loaded alginate/chitosan nanoparticles: Preparation, characterization and soil sorption studies

Energy Technology Data Exchange (ETDEWEB)

Santos Silva, Mariana dos; Sgarbi Cocenza, Daniela [Department of Environmental Engineering, Sao Paulo State University - UNESP, Avenida Tres de Marco, No. 511, CEP 18087-180, Sorocaba, SP (Brazil); Grillo, Renato; Silva de Melo, Nathalie Ferreira [Department of Environmental Engineering, Sao Paulo State University - UNESP, Avenida Tres de Marco, No. 511, CEP 18087-180, Sorocaba, SP (Brazil); Department of Biochemistry, Institute of Biology, State University of Campinas - UNICAMP, Campinas, SP (Brazil); Tonello, Paulo Sergio [Department of Environmental Engineering, Sao Paulo State University - UNESP, Avenida Tres de Marco, No. 511, CEP 18087-180, Sorocaba, SP (Brazil); Camargo de Oliveira, Luciana [Department of Chemistry, UFSCAr, Campus Sorocaba, SP (Brazil); Lopes Cassimiro, Douglas [Institute of Chemistry, Sao Paulo State University - UNESP, Araraquara, SP (Brazil); Rosa, Andre Henrique [Department of Environmental Engineering, Sao Paulo State University - UNESP, Avenida Tres de Marco, No. 511, CEP 18087-180, Sorocaba, SP (Brazil); Fernandes Fraceto, Leonardo, E-mail: leonardo@sorocaba.unesp.br [Department of Environmental Engineering, Sao Paulo State University - UNESP, Avenida Tres de Marco, No. 511, CEP 18087-180, Sorocaba, SP (Brazil); Department of Biochemistry, Institute of Biology, State University of Campinas - UNICAMP, Campinas, SP (Brazil)

2011-06-15

Agrochemicals are amongst the contaminants most widely encountered in surface and subterranean hydrological systems. They comprise a variety of molecules, with properties that confer differing degrees of persistence and mobility in the environment, as well as different toxic, carcinogenic, mutagenic and teratogenic potentials, which can affect non-target organisms including man. In this work, alginate/chitosan nanoparticles were prepared as a carrier system for the herbicide paraquat. The preparation and physico-chemical characterization of the nanoparticles was followed by evaluation of zeta potential, pH, size and polydispersion. The techniques employed included transmission electron microscopy, differential scanning calorimetry and Fourier transform infrared spectroscopy. The formulation presented a size distribution of 635 {+-} 12 nm, polydispersion of 0.518, zeta potential of -22.8 {+-} 2.3 mV and association efficiency of 74.2%. There were significant differences between the release profiles of free paraquat and the herbicide associated with the alginate/chitosan nanoparticles. Tests showed that soil sorption of paraquat, either free or associated with the nanoparticles, was dependent on the quantity of organic matter present. The results presented in this work show that association of paraquat with alginate/chitosan nanoparticles alters the release profile of the herbicide, as well as its interaction with the soil, indicating that this system could be an effective means of reducing negative impacts caused by paraquat.

[Preparation and characterization of Forms A and B of benazepril hydrochloride].

Science.gov (United States)

Fang, Hong; Hu, Xiu-rong; Gu, Jian-ming; Chen, Guan-xi; Feng, Jian-yue; Tang, Gu-ping

2012-11-01

To prepare Form A and Form B of benazepril hydrochloride and to compare the differences in spectrums, thermodynamics and crystal structure between two polymorphic forms. Form A and Form B of benazepril hydrochloride were characterized by Fourier transform infrared spectroscopy (IR), thermal gravimetric analysis (TG), differential scanning calorimetry (DSC), powder x-ray diffraction (PXRD) and single crystal x-ray diffraction (SCXRD). Preparation method, crystal structure and polymorphic stability of Form A and Form B of benazepril hydrochloride were obtained. Based on the analysis of crystal structure of both polymorphs, Form A belonged to monoclone space group P2(1) with a=7.8655(4)Å, b= 11.7700(6)Å, c= 13.5560(7)Å, β= 102.9470(10)°, V=1223.07 (11)Å(3) and Z=2, while Form B belonged to orthorhombic space group P212121, with a=7.9353(8)Å, b=11.6654(11)Å, c=26.6453(16)Å, V=2466.5(4)Å(3) and Z=4. From the DSC and XRD results, Form B of benazepril hydrochloride could be transformed into Form A after heating treatment. Form A and Form B of benazepril hydrochloride are both anhydrous and displayed different polymorphs due to different molecular configuration. Furthermore, Form A exhibits more stable than Form B at high temperatures.

Preparation and characterization of nanocomposite polymer electrolytes poly(vinylidone fluoride)/nanoclay

Energy Technology Data Exchange (ETDEWEB)

Rahmawati, Suci A.; Sulistyaningsih,; Putro, Alviansyah Z. A.; Widyanto, Nugroho F.; Jumari, Arif; Purwanto, Agus; Dyartanti, Endah R., E-mail: endahrd@uns.ac.id [Research Group of Battery & Advanced Material, Department of Chemical Engineering, Sebelas Maret University, Jl. Ir. Sutami 36 A Kentingan, Surakarta Indonesia 57126 (Indonesia)

2016-02-08

Polymer electrolytes are defined as semi solid electrolytes used as separator in lithium ion battery. Separator used as medium for transfer ions and to prevent electrical short circuits in battery cells. To obtain the optimal battery performance, separator with high porosity and electrolyte uptake is required. This can reduce the resistance in the transfer of ions between cathode and anode. The main objective of this work is to investigate the impact of different solvent (Dimethyl acetamide (DMAc), N-methyl-2-pyrrolidone (NMP) and dimethyl formamide (DMF)), pore forming agent poly(vinylpyrolidone) (PVP) and nanoclay as filler in addition of membrane using phase inversion method on the morphology, porosity, electrolyte uptake and degree of crystallinity. The membrane was prepared by the phase inversion method by adding PVP and Nanoclay using different solvents. The phase inversion method was prepared by dissolving Nanoclay and PVP in solvent for 1-2 hours, and then add the PVDF with stirring for 4 hours at 60°C. The membranes were characterized by porosity test, electrolyte uptake test, scanning electron microscope (SEM), and X-ray diffraction (XRD). The results showed that DMAc as solvent gives the highest value of porosity and electrolyte uptake. The addition of nanoclay and PVP enlarge the size of the pores and reduce the degree of crystallinity. So, the usage of DMAc as solvent is better than NMP or DMF.

Preparation and characterization of uniform-sized chitosan/silver microspheres with antibacterial activities

Energy Technology Data Exchange (ETDEWEB)

An, Jing; Ji, Zhenxing; Wang, Desong, E-mail: dswang06@126.com; Luo, Qingzhi; Li, Xueyan

2014-03-01

The chitosan/silver microspheres (CAgMs), which possess effective inhibitory on microorganisms, were prepared by an inverse-emulsification cross-linking method using CS/Ag sol as dispersed phase, whiteruss as continuous phase, and glutaraldehyde as crosslinking agent. The size and shape of CAgMs, greatly affecting their antibacterial activities, were controlled by varying the concentrations of cross-linking agent, emulsifier and CS/Ag colloid. The preparation conditions for obtaining uniform-sized microspheres were optimized. The morphology of CAgMs was characterized by scanning electron microscopy (SEM) and laser particle size analysis. The spherical CAgMs with smooth surface in the mean size of ca. 5 μm exhibited a narrow particle size distribution. Energy Dispersive X-ray spectroscopy (EDX) revealed the elemental composition of the microspheres. Transmission electron micrographs (TEM) and Fourier transform infrared spectroscopy (FTIR) of the microspheres confirmed the formation of silver nanoparticles (AgNPs). The X-ray diffraction (XRD) patterns and UV–Visible diffuse reflectance spectroscopy (UV–vis DRS) of the sample showed that AgNPs with the diameter no more than 20 nm were face-centered cubic crystallites. X-ray photoelectron spectroscopy (XPS) proved that Ag-O bond existed in the microspheres. Thermogravimetric analysis (TGA) showed that the starting decomposition temperature of CAgMs (ca. 260 °C) was much higher than that of CS (ca. 160 °C), suggesting that the as-prepared CAgMs possessed better thermal stability than original CS did. Antimicrobial assays were performed using typical Gram bacteria and fungi. The inhibitory effect indicated that the as-prepared microspheres exerted a stronger antibacterial activity as the concentration of the AgNPs is increasing, and the microspheres in smaller size had much better antibacterial activity than those in the larger size. The antimicrobial mechanism of CAgMs was discussed. - Highlights: • CAgM was

Preparation and Characterization of SiO2/SiCN Core-shell Ceramic Microspheres

Directory of Open Access Journals (Sweden)

ZHANG Hai-yuan

2017-05-01

Full Text Available The SiO2/PSN core-shell microspheres were prepared via an emulsion reaction combined with the polymer-derived ceramics (PDCs method using polysilazane (PSN in situ polymerization on the surface of SiO2 modified by silane coupling agents MPS, followed by pyrolysis process to obtain SiO2/SiCN core-shell ceramic microspheres. The effects of raw mass ratio, curing time and pyrolysis temperature on the formation and the morphology of core-shell microspheres were studied. The morphology, chemical composition and phase transformation were characterized by SEM, EDS, TEM, FT-IR and XRD. The results show that after reaction for 4h at 200℃, SiO2 completely coated PSN forms a core-shell microsphere with rough surface when the mass ratio of SiO2 and PSN is 1:4; when pyrolysis temperature is at 800-1200℃, amorphous SiO2/SiCN core-shell ceramic microspheres are prepared; at 1400℃, the amorphous phase partially crystallizes to produce SiO2, SiC and Si3N4 phase.

Preparation and characterization of collagen/hydroxypropyl methylcellulose (HPMC) blend film.

Science.gov (United States)

Ding, Cuicui; Zhang, Min; Li, Guoying

2015-03-30

This study aimed to prepare and characterize the collagen/HPMC blend film (1/1). Thermogravimetric analysis and differential scanning calorimetry were used to investigate the thermal properties of the film. Both thermal decomposition temperature and denaturation temperature of the blend film were higher than those of the collagen film due to the intermolecular hydrogen bonding interaction between collagen and HPMC, which was demonstrated by Fourier transform infrared spectroscopy. Additionally, the morphologies, mechanical properties and hydrophilicity of films were examined. The blend film exhibited a more homogeneous and compact structure compared with that of the collagen film, as observed from scanning electron microscopy and atomic force microscopy. The tensile strength, ultimate elongation and hydrophilicity of the blend film were superior to those of the pure collagen film. Furthermore, the introduction of polyethylene glycol 1500 had almost no influence on the thermal properties of the blend film but obviously improved its stretch-ability and smoothness. Copyright © 2014 Elsevier Ltd. All rights reserved.

Preparation and characterization of super absorbent polymer from sugarcane bagasse

International Nuclear Information System (INIS)

Wiwien Andriyanti; Suyanti; Ngasifudin

2012-01-01

Sugarcane bagasse is a source of biomass which large enough numbers and has not been fully exploited. At this time has developed a super absorbent polymer material of sugarcane bagasse that can absorb water up to several times of its own weight and keep this water. Super absorbent polymers can be used as a soil conditioner that can be used as an absorber and storage of ground water, the giver of nutrients for plants, and can improve soil properties. The purpose of this study is to make and characterization of super absorbent polymer (PCS) from sugarcane bagasse. Preparation of super absorbent polymers (PCS) has been done by grafting method using ionizing radiation from Electron Beam Engineering (MBE) 350 mA keV/10. Irradiation process carried out with a dose variation of 20, 35, and 50 kGy. Increasing doses of radiation will increase the percentage fraction of transplantation (grafting) and the fraction of water absorption ability (swelling ratio). (author)

Preparation, characterization and catalytic application of CoFe2O4 nanoparticles in the synthesis of benzimidazoles

Science.gov (United States)

Borade, Ravikumar M.; Shinde, Pavan R.; Kale, Swati B.; Pawar, Rajendra P.

2018-05-01

A highly efficient magnetically recoverable cobalt ferrite nano-catalyst was prepared by sol-gel autocombustion method using glycine as green fuel. The prepared material has been characterized by X-ray powder diffraction and scanning. An investigation of its catalytic activity showed it to be a heterogeneous Lewis acid catalyst for the synthesis of substituted benzimidazoles. The aqueous ethanol used as green solvent for the reaction. The nm size range of these particles facilitates the catalysis process, as an increased surface area available for the reaction. The easy separation of the catalyst by an external magnet and their recovery and reuse in next cycle reaction are additional benefits.

Preparation and characterization of PVC /ENR/CNTs Nano composites

International Nuclear Information System (INIS)

Ratnam, C.T.; Nur Azrini Ramlee; Keong, C.C.

2011-01-01

Poly (vinyl chloride), PVC/ epoxidized natural rubber blend, ENR/ carbon nano tubes, CNTs were prepared by using melt and solution blending methods. Addition of 2 phr of CNTs found to cause a drop in the tensile strength, Ts of the 50/ 50 PVC/ ENR blend. The nano composites prepared by the melt blending method exhibited higher values of Ts compared to the nano composites prepared by solution blending. Melt blending found to be an efficient method to prepare PVC/ ENR/ CNTs nano composites. (author)

Isolation and characterization of Linum usitatisimum polysaccharide to prepare mucoadhesive beads of diclofenac sodium.

Science.gov (United States)

Saquib Hasnain, M; Rishishwar, Poonam; Rishishwar, Sanjay; Ali, Sadath; Nayak, Amit Kumar

2018-05-01

The present research deals with the usefulness of isolated linseed polysaccharide (LP) as polymeric-blends with an anionic polymer, sodium alginate to prepare ionotropically cross-linking gelled mucoadhesive beads for controlled drug release. From the mature and ripe linseeds (Linum usitatisimum; family Liliaceae), LP was isolated and its colour, odour, taste, solubility in water, pH and viscosity were studied. Isolated LP was also characterized by FTIR spectroscopy and 1 H NMR analyses. LP‑calcium alginate beads loaded with diclofenac sodium were formulated via ionotropically crosslinking gelation method using calcium chloride as ionotropic crosslinker. These ionotropically crosslinked beads showed diclofenac sodium encapsulation efficiencies in these newly prepared beads were 60.78 ± 2.47 to 93.16 ± 4.08% and average bead-sizes of 1.17 ± 0.10 to 1.33 ± 0.12 mm. All LP‑calcium alginate beads loaded with diclofenac sodium demonstrated a sustained drug releasing profile over 8 h with a zero-order model of drug releasing (controlled drug releasing pattern). The LP‑calcium alginate beads loaded with diclofenac sodium displayed a pH responsive swelling and excellent biomucoadhesivity prospective with the intestinal mucosal tissue in both the acidic and alkaline pH (pH 1.2 and 7.4, respectively). These beads were also characterized by SEM and FTIR spectroscopy. Copyright © 2017. Published by Elsevier B.V.

Preparation, characterization and evaluation of drug-delivery systems: Pectin and mefenamic acid films

Energy Technology Data Exchange (ETDEWEB)

Moreira, R.B. [Universidade Federal de Mato Grosso, Rodovia MT-100, Km 3,5, Barra do Garças, MT CEP 78600-000 (Brazil); Teixeira, J.A. [Universidade Federal de Mato Grosso, Cuiabá, MT CEP 78060-900 (Brazil); Furuyama-Lima, A.M. [Universidade Estadual Paulista, IBILCE, São José do Rio Preto, SP CEP 15054-000 (Brazil); Souza, N.C. de [Universidade Federal de Mato Grosso, Rodovia MT-100, Km 3,5, Barra do Garças, MT CEP 78600-000 (Brazil); Siqueira, A.B., E-mail: buzutti@cpd.ufmt.br [Universidade Federal de Mato Grosso, Rodovia MT-100, Km 3,5, Barra do Garças, MT CEP 78600-000 (Brazil)

2014-08-20

Highlights: • The films were prepared and characterized by FTIR, TG–DSC/FTIR and AFM microscopy. • The results provided information on the composition, dehydration, thermal stability, thermal decomposition. • DSC results of CaHCl shows two overlapping endothermic peaks. • The AFM image shows great similarity for A5 and A6 films. • A5 and A6 films functioned well as a topical delivery system. - Abstract: Mefenamic acid (H-Mef) is a nonsteroidal anti-inflammatory drug (NSAID). Various adhesive dosage forms of NSAIDs have been developed, which include adhesive tablets, gels, ointments, patches and more recently, polymeric films. The objective of this study was the development of H-Mef adhesive films to be used as a drug-delivery system with different ratios of pectin and calcium chloride dihydrate by the casting technique. The materials were characterized by TG–DSC coupled FTIR, AFM (atomic force microscopy) and spectroscopic techniques. The results provided information about the dehydration, film roughness, surface morphology, thermal decomposition, as well as identification of gaseous products evolved during thermal decomposition. The characterizations indicated the A5 and A6 films functioned well, with 99% H-Mef released within 15 min at pH 5, suggesting these degradable films could be used as a topical delivery system.

Late conversion from tacrolimus to a belatacept-based immuno-suppression regime in kidney transplant recipients improves renal function, acid-base derangement and mineral-bone metabolism.

Science.gov (United States)

Schulte, Kevin; Vollmer, Clara; Klasen, Vera; Bräsen, Jan Hinrich; Püchel, Jodok; Borzikowsky, Christoph; Kunzendorf, Ulrich; Feldkamp, Thorsten

2017-08-01

Calcineurin inhibitor (CNI)-induced nephrotoxicity and chronic graft dysfunction with deteriorating glomerular filtration rate (GFR) are common problems of kidney transplant recipients. The aim of this study was to analyze the role of belatacept as a rescue therapy in these patients. In this retrospective, observational study we investigated 20 patients (10 females, 10 males) who were switched from a CNI (tacrolimus) to a belatacept-based immunosuppression because of CNI intolerance or marginal transplant function. Patient follow-up was 12 months. Patients were converted to belatacept in mean 28.8 months after transplantation. Reasons for conversion were CNI intolerance (14 patients) or marginal transplant function (6 patients). Mean estimated GFR (eGFR) before conversion was 22.2 ± 9.4 ml/min at baseline and improved significantly to 28.3 ± 10.1 ml/min at 4 weeks and to 32.1 ± 12.6 ml/min at 12 months after conversion. Serum bicarbonate significantly increased from 24.4 ± 3.2 mmol/l at baseline to 28.7 ± 2.6 mmol/l after 12 months. Conversion to belatacept decreased parathyroid hormone and phosphate concentrations significantly, whereas albumin levels significantly increased. In 6 cases an acute rejection preceded clinically relevant CNI toxicity; only two patients suffered from an acute rejection after conversion. Belatacept was well tolerated and there was no increase in infectious or malignant side effects. A late conversion from a tacrolimus-based immunosuppression to belatacept is safe, effective and significantly improves renal function in kidney transplant recipients. Additionally, the conversion to belatacept has a beneficial impact on acid-base balance, mineral-bone and protein metabolism, independently of eGFR.

The preparation, characterization and actuation behavior of polyaniline and cellulose blended electro-active paper

International Nuclear Information System (INIS)

John, Amalraj; Mahadeva, Suresha K; Kim, Jaehwan

2010-01-01

This paper reports polyaniline and cellulose blended electro-active paper (EAPap) that can produce large bending displacement at ambient humidity conditions with long lifetime durability. A novel solution processable polyaniline-p-toluene sulfonate (PANI–PTSA) salt was prepared by an inverted emulsion polymerization technique using benzoyl peroxide and p-toluene sulfonic acid. Cellulose solution prepared by dissolving cotton with lithium chloride/N, N-dimethylacetamide was mixed with the PANI emaraldine salt solution and a cellulose–PANI blended film was obtained. The obtained cellulose–PANI film was characterized by ultraviolet–visible (UV–visible), x-ray diffraction, scanning electron microscopy and tensile test methods. A cellulose–PANI EAPap actuator was made by depositing very thin gold electrodes on both sides of the cellulose–PANI film. When the actuator performance of the cellulose–PANI EAPap was evaluated in terms of bending displacement with respect to the actuation frequencies, voltages and relative humidity levels, a large bending displacement was shown at ambient humidity conditions with long lifetime durability

Properties and characterization of bionanocomposite films prepared with various biopolymers and ZnO nanoparticles.

Science.gov (United States)

Kanmani, Paulraj; Rhim, Jong-Whan

2014-06-15

This study was aimed to develop biopolymer based antimicrobial films for active food packaging and to reduce environmental pollution caused by accumulation of synthetic packaging. The ZnO NPs were incorporated as antimicrobials into different biopolymers such as agar, carrageenan and CMC. Solvent casting method was performed to prepare active nanocomposite films. Methods such as FE-SEM, FT-IR and XRD were used to characterize resulting films. Physical, mechanical, thermal and antimicrobial properties were also examined. Remarkable surface morphological differences were observed between control and nanocomposite films. The crystallinity of ZnO was confirmed by XRD analysis. The addition of ZnO NPs increased color, UV barrier, moisture content, hydrophobicity, elongation and thermal stability of the films, while decreased WVP, tensile strength and elastic modulus. ZnO NPs impregnated films inhibited growth of L. monocytogenes and E. coli. So these newly prepared nanocomposite films can be used as active packaging film to extend shelf-life of food. Copyright © 2014 Elsevier Ltd. All rights reserved.

Preparation, characterization, and anti-Helicobacter pylori activity of Bi3+-Hericium erinaceus polysaccharide complex.

Science.gov (United States)

Zhu, Yang; Chen, Yao; Li, Qian; Zhao, Ting; Zhang, Ming; Feng, Weiwei; Takase, Mohammed; Wu, Xueshan; Zhou, Zhaoxiang; Yang, Liuqing; Wu, Xiangyang

2014-09-22

Two new Bi3+-Hericium erinaceus polysaccharide (BiHEP) complexes were prepared using Bi3+ and two purified polysaccharides from H. erinaceus (HEPs), respectively. The complexes were characterized by elemental analysis, FT-IR, CD, SEM, AFM, XRD, and TG. The anti-Helicobacter pylori (Hp) activities in vitro by agar dilution assay of the complexes were evaluated. The molecular weights of HEPs were 197 and 20 kDa, respectively. All the analyses confirmed the formation of new BiHEP complexes with lower content of Bi3+ compared with colloidal bismuth subcitrate (CBS), the most utilized bismuth preparation clinically. Furthermore, HEPs themselves have definite inhibition effects on Hp, and BiHEP complexes have lower content of Bi exhibited strong inhibition effects on Hp (MIC=20 μg/mL), similar to that of CBS with higher content of Bi. The study provides a basis for further development of multiple treatments of Hp infection or new medicines. Copyright © 2014 Elsevier Ltd. All rights reserved.

Preparation and Characterization of Colon-Specific Microspheres of ...

African Journals Online (AJOL)

Purpose: To prepare and evaluate colon specific drug delivery system of diclofenac sodium for highly localized delivery to the colon. Methods: The colon specific drug delivery system was prepared as matrix-type microspheres using Ethyl Cellulose (EC), Cellulose Acetate Phthalate (CAP), and Eudragit L 100-55 by the ...

Preparation and characterization of high density polyethylene and residual fibre of Attalea funifera Mart (piacava) composites

International Nuclear Information System (INIS)

Agrela, Sara P.; Guimaraes, Danilo H.; Jose, Nadia M.; Carvalho, Gleidson G.P.; Carvalho, Ricardo F.

2009-01-01

The use of natural fiber reinforcement thermoplastic polymer is continuously increasing. This fact is manly due to its advantages as low cost, availability, recyclability, low energy demand and then environmental appeal if compared to synthetics fibers. The composites were prepared in different fiber volume ratios (5%, 10% and 20%) mixed with high density polyethylene (HDPE) and heated at 190 deg C. Thermogravimetric analysis and differential scanning calorimetry were used to investigate thermal stability. The composites structure was characterized by Fourier Transform Infrared spectroscopy, X-ray diffractometry. Fiber and residue of piassava (Attalea funifera Mart) chemical composition were determined by Van Soest Method. The results indicate that thermo stability of the composites of HDPE prepared with fiber volume ratios up to 20% is only slightly lowered. (author)

Preparation and Characterization of Mesoporous Zirconia Made by Using a Poly (methyl methacrylate Template

Directory of Open Access Journals (Sweden)

Zhang Chunxiang

2008-01-01

Full Text Available AbstractSuperfine powders of poly (methyl methacrylate (PMMA have been prepared by means of an emulsion polymerization method. These have been used as templates in the synthesis of tetragonal phase mesoporous zirconia by the sol–gel method, using zirconium oxychloride and oxalic acid as raw materials. The products have been characterized by infrared spectroscopy, X-ray diffraction analysis, transmission electron microscopy, N2adsorption-desorption isotherms, and pore size distribution. The results indicate that the average pore size was found to be 3.7 nm.

Preparation and characterization of antibacterial electrospun chitosan/poly (vinyl alcohol)/graphene oxide composite nanofibrous membrane

Science.gov (United States)

Yang, Shuai; Lei, Peng; Shan, Yujuan; Zhang, Dawei

2018-03-01

In this paper, chitosan (CS)/poly (vinyl alcohol) (PVA)/graphene oxide (GO) composite nanofibrous membranes were prepared via electrospinning. Such nanofibrous membranes have been characterized and investigated for their morphological, structural, thermal stability, hydrophilic and antibacterial properties. SEM images showed that the uniform and defect-free nanofibers were obtained and GO sheets, shaping spindle and spherical, were partially embedded into nanofibers. FTIR, XRD, DSC and TGA indicated the good compatibility between CS and PVA. There were strong intermolecular hydrogen bonds between the chitosan and PVA molecules. Contact angle measurement indicated that while increasing the content of GO, the distance between fibers increased and water drop showed wetting state on the surface of nanofibrous membranes. As a result, the contact angle decreased significantly. Meanwhile, good antibacterial activity of the prepared nanofibrous membranes were exhibited against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus.

Preparation and characterization of adsorbents for treatment of water associated with oil production

KAUST Repository

Sueyoshi, Mark

2012-09-01

Two sets of adsorbents were prepared from locally available raw materials, characterized and tested. The first set consists of crushed natural attapulgite and crushed attapulgite mixed with petroleum tank-bottom sludge and carbonized at 650 °C. Another set was prepared using trunk of date palm tree (Phoenix dactylifera) activated at 700 and 800°C. Both sets were characterized using BET surface area and pore distributions, FTIR, XRD, SEM and TEM. Natural attapulgite and attapulgite/sludge composite exhibited different characteristics and adsorptive capacities for oil removal from oily water. Adsorptive capacities were calculated from the breakthrough curves of a column test. An oily water solution of about 500 mg-oil/L was passed through both the attapulgite and attapulgite/sludge columns until the column effluent concentration exceeded a reference limit of 10 mg-oil/L. Uptake was calculated at this limit at 155 and 405 mg-oil/g-adsorbent, respectively. This was lower than the performance of a commercial activated carbon sample (uptake calculated at 730 mg-oil/g-adsorbent). Relatively, the date palm, carbonaceous-based adsorbent samples showed less significant differences in both bulk and surface properties. Uptake significantly improved to 1330-1425 mg-oil/g-adsorbent. Attempt was made to associate this performance with the difference in the surface areas between the two sets. However, other factors are found to be important as the second set has a range of surface area less than that of the commercial sample. As evidenced by FTIR, XRD and TEM, the activated carbonaceous materials developed porous structures which form defective graphitic sheet ensembles that serve as additional adsorption sites in the sample. © 2012 Elsevier B.V.

Preparation and characterization of adsorbents for treatment of water associated with oil production

KAUST Repository

Sueyoshi, Mark; Al-Maamari, Rashid S.; Jibril, Baba Y.; Tasaki, Masaharu; Okamura, Kazuo; Kuwagaki, Hitoshi; Yahiro, Hidenori; Sagata, Kunimasa; Han, Yu

2012-01-01

Two sets of adsorbents were prepared from locally available raw materials, characterized and tested. The first set consists of crushed natural attapulgite and crushed attapulgite mixed with petroleum tank-bottom sludge and carbonized at 650 °C. Another set was prepared using trunk of date palm tree (Phoenix dactylifera) activated at 700 and 800°C. Both sets were characterized using BET surface area and pore distributions, FTIR, XRD, SEM and TEM. Natural attapulgite and attapulgite/sludge composite exhibited different characteristics and adsorptive capacities for oil removal from oily water. Adsorptive capacities were calculated from the breakthrough curves of a column test. An oily water solution of about 500 mg-oil/L was passed through both the attapulgite and attapulgite/sludge columns until the column effluent concentration exceeded a reference limit of 10 mg-oil/L. Uptake was calculated at this limit at 155 and 405 mg-oil/g-adsorbent, respectively. This was lower than the performance of a commercial activated carbon sample (uptake calculated at 730 mg-oil/g-adsorbent). Relatively, the date palm, carbonaceous-based adsorbent samples showed less significant differences in both bulk and surface properties. Uptake significantly improved to 1330-1425 mg-oil/g-adsorbent. Attempt was made to associate this performance with the difference in the surface areas between the two sets. However, other factors are found to be important as the second set has a range of surface area less than that of the commercial sample. As evidenced by FTIR, XRD and TEM, the activated carbonaceous materials developed porous structures which form defective graphitic sheet ensembles that serve as additional adsorption sites in the sample. © 2012 Elsevier B.V.

COMPARATIVE ANALYSIS OF SOLUBLE OF CD40 LIGAND LEVELS IN HEART RECIPIENTS TREATED WITH CYCLOSPORINE A AND TACROLIMUS

Directory of Open Access Journals (Sweden)

O. P. Shevchenko

2012-01-01

Full Text Available Soluble form of CD40L is platelet activating factor, which is a marker of inflammation and thrombosis. Elevated levels of sCD40L before the heart transplantation are associated with the risk of early development of cardiova- scular complications. The study included 54 patients who had received heart transplants. All recipients received a triple heart immu- nosuppressive therapy, including methylprednisolone, mycophenolate mofetil and cyclosporine A (20 recipients or methylprednisolone, mycophenolate mofetil and tacrolimus (34 recipients. Patients were not differed by age, gender, etiology of heart failure before heart transplantation (p > 0,05. In the first group of transplant recipients, the relative risk of cardiovascular events with high sCD40L levels before transplantation was 3 2 (95% CI 1,4; 12,0. In the second group of recipients, respectively, 2.69 (95% CI 1,1; 8,5. SCD40L level after heart transplan- tation was significantly higher for patients receiving cyclosporine (P < 0.05. Increasing concentrations of sCD40L are associated with a higher incidence of cardiovascular complications. 

Preparation and characterization of MWCNT nanofiller incorporated polymer composite for lithium battery applications

Energy Technology Data Exchange (ETDEWEB)

Pradeepa, P.; Raj, S. Edwin; Selvakumar, K.; Sowmya, G.; Prabhu, M. Ramesh, E-mail: mkram83@gmail.com [School of Physics, Alagappa University, Karaikudi-630 003, Tamil Nadu (India)

2015-06-24

Poly (ethyl methacrylate) based polymer electrolyte films were prepared by solution casting technique incorporating multi-walled carbon nanotube (MWCNT) as filler and characterized using XRD and Ac impedance analysis. The electrical conductivity is increased with increasing filler concentration (upto 6wt %), which is attributed to the formation of charge transfer complexes. The maximum ionic conductivity value is found to be 1.171×10{sup −3} Scm{sup −1} at 303K for PEMA (19wt %) -LiClO{sub 4} (8wt %) -MWCNT (6wt %) -PC (67wt %) electrolyte system. The temperature dependent ionic conductivity plot seems to obey Vogel -Tamman-Fulcher relation.

Preparation and characterization of morph-genetic aluminum nitride/carbon composites from filter paper

International Nuclear Information System (INIS)

Wang Wei; Xue Tao; Jin Zhihao; Qiao Guanjun

2008-01-01

Morph-genetic aluminum nitride/carbon composites with cablelike structure were prepared from filter paper template through the surface sol-gel process and carbothermal nitridation reaction. The resulting materials have a hierarchical structure originating from the morphology of cellulose paper. The aluminum nitride/carbon composites have the core-shell microstructure, the core is graphitic carbon, and the shell is aluminum nitride nanocoating formed by carbothermal nitridation reduction of alumina with the interfacial carbon in nitrogen atmosphere. Scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and transmission electron microscope were employed to characterize the structural morphology and phase compositions of the final products

Preparation and Characterization of Activated Carbon Fibers from Liquefied Wood by ZnCl2 Activation

Directory of Open Access Journals (Sweden)

Zhigao Liu

2016-02-01

Full Text Available In this study, activated carbon fibers (ACFs were prepared from liquefied wood by chemical activation with ZnCl2, with a particular focus on the effects of temperature and ZnCl2: liquefied wood-based fiber (LWF ratio on yield, porous texture, and surface chemistry. The characterization and properties of these ACFs were investigated by nitrogen adsorption/desorption, Fourier transform infrared (FTIR spectroscopy, and X-ray photoelectron spectroscopy (XPS. When using a 6:1 impregnation ratio, the specific surface area (SBET of the resultant ACFs was as high as 1423 m2/g. The effect of an increase in impregnation ratio on the porosity of ACFs was stronger than that of an increase in the activation temperature. However, the former had a weaker impact on the surface chemistry and structure. It was also found that the yields of ACFs obtained by ZnCl2 activation were higher than those obtained by physical activation. Besides, the prepared ACFs presented higher adsorption than other raw materials in the adsorption test, indicating that ACFs prepared from LWF by ZnCl2 activation could be used as an adsorbent for the adsorption of medium size organic compounds.

Preparation and characterization of flower-like gold nanomaterials and iron oxide/gold composite nanomaterials

International Nuclear Information System (INIS)

Yang Zusing; Lin, Z H; Tang, C-Y; Chang, H-T

2007-01-01

We have successfully synthesized flower-like gold nanomaterials and Fe 3 O 4 /Au composite nanomaterials through the use of wet chemical methods in aqueous solution. In the presence of 0.5 mM citrate, 0.313 mM poly(ethylene glycol), and 109.72 mM sodium acetate (NaOAc), we prepared Au nanoflowers (NFs) having diameters ranging from 300 to 400 nm in aqueous solution after the reduction of Au ions at room temperature for 10 min. In the presence of spherical Fe 3 O 4 nanomaterials, we applied a similar synthetic method to prepare Fe 3 O 4 /Au composite nanomaterials, including nanowires (NWs) that have a length of 1.58 μm and a width of 28.3 nm. We conducted energy-dispersive x-ray analysis, scanning electron microscopy, transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption, and x-ray powder diffraction measurements to characterize the as-prepared flower-like Au nanomaterials and Fe 3 O 4 /Au composite nanomaterials. From time-evolution TEM measurements, we suggested that Au atoms that were bound to the Fe 3 O 4 nanomaterials grew to form Fe 3 O 4 /Au composite nanomaterials. The as-prepared Au NFs absorbed light strongly in the visible-near-infrared (Vis-NIR) region (500-1200 nm). The Fe 3 O 4 /Au composite nanomaterials had electronic conductivities greater than 100 nA at an applied voltage of 20 mV, which induced a temperature increase of 20.5 ± 0.5 deg. C under an alternating magnetic field (62 μT)

Preparation and characterization of radionuclide 64Cu for positron emission tomographic diagnosis and therapy

International Nuclear Information System (INIS)

Ometakova, J.

2013-01-01

We occupy ourselves with preparation of 64 Cu using cyclotron IBA 18/9. 64 Cu is a starting product for production of radiopharmaceuticals for positron emission tomographic diagnostics and therapy and metrological characterization as well. The use of non-traditional PET radionuclides has been spread in the world recently. Due to the physical properties (T 1/2 =12.7 h, β- 37.1 %, β + 17.9 %), 64 Cu is suitable for therapy (β - ) and diagnosing as well (β+). 64 Cu is suitable radionuclide for labeling of radiopharmaceuticals on the basis of bis-thiosemicarbazone for study of hypoxic tumors. The number and orientation of articles and papers at conferences show a great demand for 64 Cu in the world. It is caused by specific physical properties and possibility of preparation in small biomedical cyclotrons as well. An electrolytic preparation of a target lies in a galvanostatic plating of 64 Ni on a gold target. The target is irradiated by a cyclotron IBA Cyclone 18/9. COSTIS station (Compact Solid Target Irradiation System) is installed at the end of external proton beam. 64 Cu is separated from the target material by ionex Bio-Rad AG1-X8 as [ 64 Cu]CuCl 2 . The target material is recycled by a simple method. A process of 64 Cu preparation is completely automated and runs in a separation module with Plc Simatin S-1200 developed by Biont a.s. The product was measured by an ionization chamber (Curiementor), HPGe detector and LSC method (TDCR). (author)

Preparation and characterization of radionuclide 64Cu for positron emission tomographic diagnosis and therapy

International Nuclear Information System (INIS)

Ometakova, J.

2013-01-01

We occupy ourselves with preparation of 64 Cu using cyclotron IBA 18/9. 64 Cu is a starting product for production of radiopharmaceuticals for positron emission tomographic diagnostics and therapy and metrological characterization as well. The use of non-traditional PET radionuclides has been spread in the world recently. Due to the physical properties (T 1/2 =12.7 h, β- 37.1 %, β + 17.9 %), 64 Cu is suitable for therapy (β - ) and diagnosing as well (β+). 64 Cu is suitable radionuclide for labeling of radiopharmaceuticals on the basis of bis-thiosemicarbazone for study of hypoxic tumors. The number and orientation of articles and papers at conferences show a great demand for 64 Cu in the world. It is caused by specific physical properties and possibility of preparation in small biomedical cyclotrons as well. An electrolytic preparation of a target lies in a galvanostatic plating of 64 Ni on a gold target. The target is irradiated by a cyclotron IBA Cyclone 18/9. COSTIS station (Compact Solid Target Irradiation System) is installed at the end of external proton beam. 64 Cu is separated from the target material by ionex Bio-Rad AG1-X8 as [ 64 Cu]CuCl 2 . The target material is recycled by a simple method. A process of 64 Cu preparation is completely automated and runs in a separation module with PLC SIMATIC S7-1200 developed by Biont a.s. The product was measured by an ionization chamber (Curiementor), HPGe detector and LSC method (TDCR). (author)

Preparation and characterization of phloroglucinol-formaldehyde aerogel

International Nuclear Information System (INIS)

Huang Changgang; China Academy of Engineering Physics, Mianyang; Tang Yongjian; Wang Chaoyang; Yan Hongmei

2006-01-01

Phloroglucinol-formaldehyde (PF) aerogels and carbonized PF (CPF) aerogels were prepared from Phloroglucinol (P) and Formaldehyde (F) by sol-gel, solvent exchanging, supercritical drying and carbonization processes. The aerogel has a large specific surface area, continuous nano-network and porous structure. The density and mean porosity radius will enlarge after being carbonized, while the specific surface area will be influenced little. The micro-structure and density of aerogel are controlled by concentration of total reactants and catalyzer, respectively. Aerogels with different micro-structure and different density fit for ICF targets can be prepared by optimizing synthesis conditions. (authors)

Preparation and characterization of activated carbons from albizia ...

African Journals Online (AJOL)

Activated carbon was prepared from the pods of Albizia saman for the purpose of converting the waste to wealth. The pods were thoroughly washed with water to remove any dirt, air- dried and cut into sizes of 2-4 cm. The prepared pods were then carbonised in a muffle furnace at temperatures of 4000C, 5000C, 6000C ...

Process Development in the Preparation and Characterization of Silicon Alkoxide From Rice Husk

International Nuclear Information System (INIS)

Khin San Win; Toe Shein; Nyunt Wynn

2011-12-01

The preparation and characterization of silicon alkoxide (silicon isopropoxide) from rice husk char has been studied. In the investigation, four kinds of Myanmar paddies were chemically assayed. Analyses showed the silicon contend varies from 73-92% . Based on the silicon content, the process development in the production of silicon isopropoxide was carried out. In the process development, silicon isopropoxide with a yield of 44.21% was achieved by the direct reaction of isopropanol in situ by silicon tetrachloride, which was directly produced by the chlorination of rice husk char at the high temperature range of 900-1100 C. The novelity of the process was that, silicon isopropoxide was achieved in situ and not by using the old process, where generally isopropanol was reacted with silicon tetrachloride. The physiochemical properties of silicon isopropoxide was confirmed by conventional and modern techniques. In the investigation, the starting materials, silica in the reaction products were characterized, identified and confirmed by modren techniques. Silicon isopropoxide can be a sources of pore silica whereby silicon of 97-99% of purity can be achieved.

Characterization of dense lead lanthanum titanate ceramics prepared from powders synthesized by the oxidant peroxo method

Energy Technology Data Exchange (ETDEWEB)

Pinto, Alexandre H. [LIEC-Laboratorio Interdisciplinar de Eletroquimica e Ceramica, Departamento de Quimica, UFSCar-Universidade Federal de Sao Carlos, Rod.Washington Luis km 235, CP 676 Sao Carlos, SP 13565-905 (Brazil); Souza, Flavio L., E-mail: flavio.souza@ufabc.edu.br [Centro de Ciencias Naturais e Humanas, Universidade Federal do ABC, Rua Santa Adelia 166, Bangu, Santo Andre, SP 09210-170 (Brazil); Chiquito, Adenilson J., E-mail: chiquito@df.ufscar.br [Departamento de Fisica, UFSCar-Federal University of Sao Carlos, Rod.Washington Luis km 235, CP 676 Sao Carlos, SP 13565-905 (Brazil); Longo, Elson, E-mail: elson@iq.unesp.br [Instituto de Quimica de Araraquara, UNESP-Universidade Estadual Paulista, Rua Francisco Degni, CP 355 Araraquara, SP 14801-907 (Brazil); Leite, Edson R., E-mail: derl@power.ufscar.br [LIEC-Laboratorio Interdisciplinar de Eletroquimica e Ceramica, Departamento de Quimica, UFSCar-Universidade Federal de Sao Carlos, Rod.Washington Luis km 235, CP 676 Sao Carlos, SP 13565-905 (Brazil); Camargo, Emerson R., E-mail: camargo@ufscar.br [LIEC-Laboratorio Interdisciplinar de Eletroquimica e Ceramica, Departamento de Quimica, UFSCar-Universidade Federal de Sao Carlos, Rod.Washington Luis km 235, CP 676 Sao Carlos, SP 13565-905 (Brazil)

2010-12-01

Nanosized powders of lead lanthanum titanate (Pb{sub 1-x}La{sub x}TiO{sub 3}) were synthesized by means of the oxidant-peroxo method (OPM). Lanthanum was added from 5 to 30% in mol through the dissolution of lanthanum oxide in nitric acid, followed by the addition of lead nitrate to prepare a solution of lead and lanthanum nitrates, which was dripped into an aqueous solution of titanium peroxo complexes, forming a reactive amorphous precipitate that could be crystallized by heat treatment. Crystallized powders were characterized by FT-Raman spectroscopy and X-ray powder diffraction, showing that tetragonal perovskite structure is obtained for samples up to 25% of lanthanum and cubic perovskite for samples with 30% of lanthanum. Powders containing 25 and 30% in mol of lanthanum were calcined at 700 deg. C for 2 h, and in order to determine the relative dielectric permittivity and the phase transition behaviour from ferroelectric-to-paraelectric, ceramic pellets were prepared and sintered at 1100 or 1150 deg. C for 2 h and subjected to electrical characterization. It was possible to observe that sample containing 25% in mol of La presented a normal behaviour for the phase transition, whereas the sample containing 30% in mol of La presented a diffuse phase transition and relaxor behaviour.

Characterization of dense lead lanthanum titanate ceramics prepared from powders synthesized by the oxidant peroxo method

International Nuclear Information System (INIS)

Pinto, Alexandre H.; Souza, Flavio L.; Chiquito, Adenilson J.; Longo, Elson; Leite, Edson R.; Camargo, Emerson R.

2010-01-01

Nanosized powders of lead lanthanum titanate (Pb 1-x La x TiO 3 ) were synthesized by means of the oxidant-peroxo method (OPM). Lanthanum was added from 5 to 30% in mol through the dissolution of lanthanum oxide in nitric acid, followed by the addition of lead nitrate to prepare a solution of lead and lanthanum nitrates, which was dripped into an aqueous solution of titanium peroxo complexes, forming a reactive amorphous precipitate that could be crystallized by heat treatment. Crystallized powders were characterized by FT-Raman spectroscopy and X-ray powder diffraction, showing that tetragonal perovskite structure is obtained for samples up to 25% of lanthanum and cubic perovskite for samples with 30% of lanthanum. Powders containing 25 and 30% in mol of lanthanum were calcined at 700 deg. C for 2 h, and in order to determine the relative dielectric permittivity and the phase transition behaviour from ferroelectric-to-paraelectric, ceramic pellets were prepared and sintered at 1100 or 1150 deg. C for 2 h and subjected to electrical characterization. It was possible to observe that sample containing 25% in mol of La presented a normal behaviour for the phase transition, whereas the sample containing 30% in mol of La presented a diffuse phase transition and relaxor behaviour.

Preparation and Characterization of Microencapsulated Phase Change Materials for Use in Building Applications

Directory of Open Access Journals (Sweden)

Jessica Giro-Paloma

2015-12-01

Full Text Available A method for preparing and characterizing microencapsulated phase change materials (MPCM was developed. A comparison with a commercial MPCM is also presented. Both MPCM contained paraffin wax as PCM with acrylic shell. The melting temperature of the PCM was around 21 °C, suitable for building applications. The M-2 (our laboratory made sample and Micronal® DS 5008 X (BASF samples were characterized using SEM, DSC, nano-indentation technique, and Gas Chromatography/Mass spectrometry (GC-MS. Both samples presented a 6 μm average size and a spherical shape. Thermal energy storage (TES capacities were 111.73 J·g−1 and 99.3 J·g−1 for M-2 and Micronal® DS 5008 X, respectively. Mechanical characterization of the samples was performed by nano-indentation technique in order to determine the elastic modulus (E, load at maximum displacement (Pm, and displacement at maximum load (hm, concluding that M-2 presented slightly better mechanical properties. Finally, an important parameter for considering use in buildings is the release of volatile organic compounds (VOC’s. This characteristic was studied at 65 °C by CG-MS. Both samples showed VOC’s emission after 10 min of heating, however peaks intensity of VOC’s generated from M-2 microcapsules showed a lower concentration than Micronal® DS 5008 X.

Preparation and Characterization of Microencapsulated Phase Change Materials for Use in Building Applications.

Science.gov (United States)

Giro-Paloma, Jessica; Al-Shannaq, Refat; Fernández, Ana Inés; Farid, Mohammed M

2015-12-26

A method for preparing and characterizing microencapsulated phase change materials (MPCM) was developed. A comparison with a commercial MPCM is also presented. Both MPCM contained paraffin wax as PCM with acrylic shell. The melting temperature of the PCM was around 21 °C, suitable for building applications. The M-2 (our laboratory made sample) and Micronal ® DS 5008 X (BASF) samples were characterized using SEM, DSC, nano-indentation technique, and Gas Chromatography/Mass spectrometry (GC-MS). Both samples presented a 6 μm average size and a spherical shape. Thermal energy storage (TES) capacities were 111.73 J·g -1 and 99.3 J·g -1 for M-2 and Micronal ® DS 5008 X, respectively. Mechanical characterization of the samples was performed by nano-indentation technique in order to determine the elastic modulus ( E ), load at maximum displacement ( P m ), and displacement at maximum load ( h m ), concluding that M-2 presented slightly better mechanical properties. Finally, an important parameter for considering use in buildings is the release of volatile organic compounds (VOC's). This characteristic was studied at 65 °C by CG-MS. Both samples showed VOC's emission after 10 min of heating, however peaks intensity of VOC's generated from M-2 microcapsules showed a lower concentration than Micronal ® DS 5008 X.

Preparation and characterization of biodegradable composites based on brazilian cassava starch, corn starch and green coconut fibers

Energy Technology Data Exchange (ETDEWEB)

Ramirez, Maria Guadalupe Lomeli; Muniz, Graciela I. Bolzon de.; Satyanarayana, Kestur G.; Tanobe, Valcineide; Iwakiri, Setsuo, E-mail: glomeli12@hotmail.com [Universidade Federal do Parana (UFPR), Curitiba, Parana (Brazil). Centro de Ciencias Florestais e da Madeira

2010-07-01

Increasing search for new materials with high premium on eco-friendliness, new trend is emerging in materials development such as composites, which are well established for a wide variety of applications. With growing interest and importance of renewable bioresources has led to more stress on the use of locally available materials. This paper presents preliminary results on the preparation and characterization of composites based on Brazilian coconut fibers and starches of cassava and corn. The raw materials were characterized for their morphology, chemical composition, and thermal properties and X-ray diffraction studies. Coir fibers were also tested for their tensile properties showing increasing strength and Young's modulus with decreasing diameter, while the % elongation remaining constant. Lignin content of coir was found to be 35%. Structure and properties of composites containing 0, 5 10, 15% fibers in both the matrices and prepared by compression molding would be compared. For the 2 types of starch, there was an increase in the tensile strength by the increasing proportion of fiber. The effect of moisture in the composite stress affects the strength and percentage elongation. The water absorption was higher in the composites made from cassava starch. (author)

Preparation and characterization of biodegradable composites based on brazilian cassava starch, corn starch and green coconut fibers

International Nuclear Information System (INIS)

Ramirez, Maria Guadalupe Lomeli; Muniz, Graciela I. Bolzon de.; Satyanarayana, Kestur G.; Tanobe, Valcineide; Iwakiri, Setsuo

2010-01-01

Increasing search for new materials with high premium on eco-friendliness, new trend is emerging in materials development such as composites, which are well established for a wide variety of applications. With growing interest and importance of renewable bioresources has led to more stress on the use of locally available materials. This paper presents preliminary results on the preparation and characterization of composites based on Brazilian coconut fibers and starches of cassava and corn. The raw materials were characterized for their morphology, chemical composition, and thermal properties and X-ray diffraction studies. Coir fibers were also tested for their tensile properties showing increasing strength and Young's modulus with decreasing diameter, while the % elongation remaining constant. Lignin content of coir was found to be 35%. Structure and properties of composites containing 0, 5 10, 15% fibers in both the matrices and prepared by compression molding would be compared. For the 2 types of starch, there was an increase in the tensile strength by the increasing proportion of fiber. The effect of moisture in the composite stress affects the strength and percentage elongation. The water absorption was higher in the composites made from cassava starch. (author)

DNA-modified electrodes (Ⅶ)——Preparation and characterization of DNA-bonded and DNA-adsorbed SAM/Au electrodes

Institute of Scientific and Technical Information of China (English)

陆琪; 庞代文; 胡深; 程介克; 蔡雄伟; 施财辉; 毛秉伟; 戴鸿平

1999-01-01

Two kinds of DNA-modified electrodes were prepared by covalent and adsorptive immobilization of DNA onto self-assembled monolayers of 2, 2’-dithiodiethanol on gold electrodes and characterized by cyclic voltammetry, Xray photoelectron spectroscopy and scanning tunneling microscopy. The results suggest that the methods are satisfactory for the immobilization of DNA on electrodes.

Preparation and Characterization of Silver Liquid Thin Films for Magnetic Fluid Deformable Mirror

Directory of Open Access Journals (Sweden)

Lianchao Zhang

2015-01-01

Full Text Available Silver liquid thin film, formed by silver nanoparticles stacking and spreading on the surface of the liquid, is one of the important parts of magnetic fluid deformable mirror. First, silver nanoparticles were prepared by liquid phase chemical reduction method using sodium citrate as reducing agent and stabilizer and silver nitrate as precursor. Characterization of silver nanoparticles was studied using X-ray diffractometer, UV-vis spectrophotometer, and transmission electron microscope (TEM. The results showed that silver nanoparticles are spherical and have a good monodispersity. Additionally, the effect of the reaction conditions on the particle size of silver is obvious. And then silver liquid thin films were prepared by oil-water two-phase interface technology using as-synthesized silver nanoparticles. Properties of the film were investigated using different technology. The results showed that the film has good reflectivity and the particle size has a great influence on the reflectivity of the films. SEM photos showed that the liquid film is composed of multilayer silver nanoparticles. In addition, stability of the film was studied. The results showed that after being stored for 8 days under natural conditions, the gloss and reflectivity of the film start to decrease.

Preparation and Characterization of Polyelectrolyte Complexes of Hibiscus esculentus (Okra Gum and Chitosan

Directory of Open Access Journals (Sweden)

Vivekjot Brar

2018-01-01

Full Text Available Polyelectrolyte complexes (PECs of Okra gum (OKG extracted from fruits of Hibiscus esculentus (Malvaceae and chitosan (CH were prepared using ionic gelation technique. The PECs were insoluble and maximum yield was obtained at weight ratio of 7 : 3. The supernatant obtained after extracting PECs was clearly representing complete conversion of polysaccharides into PECs. Complexation was also evaluated by measuring the viscosity of supernatant after precipitation of PECs. The dried PECs were characterized using FTIR, DSC, zeta potential, water uptake, and SEM studies. Thermal analysis of PECs prepared at all ratios (10 : 90, 20 : 80, 30 : 70, 40 : 60, 50 : 50, 60 : 40, 70 : 30, 80 : 20, and 90 : 10; OKG : CH depicted an endothermic peak at approximately 240°C representing cleavage of electrostatic bond between OKG and CH. The optimized ratio (7 : 3 exhibited a zeta potential of −0.434 mV and displayed a porous structure in SEM analysis. These OKG-CH PECs can be further employed as promising carrier for drug delivery.

Preparation, Structure Characterization and Thermal Decomposition ...

African Journals Online (AJOL)

NJD

Decomposition Process of the Dysprosium(III) m-Methylbenzoate 1 ... A dinuclear complex [Dy(m-MBA)3phen]2·H2O was prepared by the reaction of DyCl3·6H2O, m-methylbenzoic acid and .... ing rate of 10 °C min–1 are illustrated in Fig. 4.

Coordination chemistry of actinide elements: preparation of new uranium complexes with schiff bases and their characterization (Preprint No. CT-31)

International Nuclear Information System (INIS)

Hingorani, S.; Reddy, P.S.N.; Agarwala, B.V.

1988-02-01

The Schiff bases, o-vanillin semicarbazone (oVSC) and 2-pyridine carboxaldehyde isonicotinoyl hydrazone (PCINH) have been prepared and their novel complexes with dioxouranium(VI) have been synthesized and characterized by IR spectra, elemental analysis and other physico-chemical techniques. (author)

Preparation and characterization of polymeric nanocomposite films for application as protective coatings

Science.gov (United States)

Gagliardi, S.; Rondino, F.; D'Erme, C.; Persia, F.; Menchini, F.; Santarelli, M. L.; Paulke, B.-R.; Enayati, A. L.; Falconieri, M.

2017-08-01

Addiction of ceramic nanoparticles to acrylic polymers provides a simple and effective means to produce paints with important properties, such as mechanical resistance and tailored wettability, even though for optimal performances, an engineered nanoparticle distribution would be desirable. In this paper we report on the realization and on the morphological and functional characterization of nanocomposites where the nanophase is distributed on the surface of acrylic polymer films, in order to enhance the expression of surface-related properties. To this aim, commercial titanium oxide and silicon oxide nanopowders were dispersed in water and the suspensions were air-sprayed on polymeric films prepared by paint brushing, thus producing a nanostructured ceramic surface coating. Control of the pH of suspensions and acrylic acid functionalization of the surface of titania were used together with high power ultrasonic treatments in order to control dimension of the aggregates in the sprayed suspensions. Optical microscopy, mechanical profilometry, and atomic force microscopy were used to characterize the nanocomposite surface morphology and correlate it to the coating functional properties, evaluated through mechanical abrasion tests and contact angle measurements; also, colorimetry on coated stones was performed in order to test the impact of the coatings on the aesthetical appearance and their photostability under UV irradiation. Results show that the nanostructured ceramic layer slightly improves the resistance of coatings to mechanical abrasion in case of polymer films prepared from latexes. The nanocomposite surface layer does not affect the wettability of the polymer, which remained slightly hydrophilic; this behavior is likely due to inadequate distribution of the nanophase. On the other hand UV-induced superhydrophilicity was observed when the concentration of surface titania nanoparticles is about 0.6 mg/cm2. Colorimetric analysis on historical and Carrara

Preparation, Characterization and Activity of a Peptide-Cellulosic Aerogel Protease Sensor from Cotton

Directory of Open Access Journals (Sweden)

J. Vincent Edwards

2016-10-01

Full Text Available Nanocellulosic aerogels (NA provide a lightweight biocompatible material with structural properties, like interconnected high porosity and specific surface area, suitable for biosensor design. We report here the preparation, characterization and activity of peptide-nanocellulose aerogels (PepNA made from unprocessed cotton and designed with protease detection activity. Low-density cellulosic aerogels were prepared from greige cotton by employing calcium thiocyanate octahydrate/lithium chloride as a direct cellulose dissolving medium. Subsequent casting, coagulation, solvent exchange and supercritical carbon dioxide drying afforded homogeneous cellulose II aerogels of fibrous morphology. The cotton-based aerogel had a porosity of 99% largely dominated by mesopores (2–50 nm and an internal surface of 163 m2·g−1. A fluorescent tripeptide-substrate (succinyl-alanine-proline-alanine-4-amino-7-methyl-coumarin was tethered to NA by (1 esterification of cellulose C6 surface hydroxyl groups with glycidyl-fluorenylmethyloxycarbonyl (FMOC, (2 deprotection and (3 coupling of the immobilized glycine with the tripeptide. Characterization of the NA and PepNA included techniques, such as elemental analysis, mass spectral analysis, attenuated total reflectance infrared imaging, nitrogen adsorption, scanning electron microscopy and bioactivity studies. The degree of substitution of the peptide analog attached to the anhydroglucose units of PepNA was 0.015. The findings from mass spectral analysis and attenuated total reflectance infrared imaging indicated that the peptide substrate was immobilized on to the surface of the NA. Nitrogen adsorption revealed a high specific surface area and a highly porous system, which supports the open porous structure observed from scanning electron microscopy images. Bioactivity studies of PepNA revealed a detection sensitivity of 0.13 units/milliliter for human neutrophil elastase, a diagnostic biomarker for inflammatory

Preparation and characterization of gold nanocrystals and nanomultilayer mirrors for X-ray diffraction experiments

International Nuclear Information System (INIS)

Slieh, Jawad

2009-03-01

In order to make possible studies on the dynamics of protein molecules in their natural environment Sasaki has developed in the last years a new X-ray diffraction procedure. In this procedure, which is called dynamical X-ray tracking (DXT), the diffraction occurs not directly on the protein molecule, but on a nanomirror rigidly bound to the protein molecule. Measured is hereby the time variation od the alignment of the nanocrystal, which is determined by means of the position of the Laue-diffraction points. By means of these position variations statements on structure variations of the studied protein can be derived with a high spatial accuracy in the time domain. The scientific aim of this thesis is the construction of a DXT measuring place as well as the preparation of the requireds nanocrystalline X-ray diffracting protein labels including their characterization. First a short survey about the foundations of the X radiation and their interactions with matter, especially under regardment of X-ray diffraction on crystals, is given. The measuring methods for the determination of the crystal alignment as well as the vertical and lateral crystal size are presented. In the following chapter a comprehensive survey about the different devices and analysis methods used for the fabrication and characterization of gold crystals is presented. Additionally with precise technical statements the self-constructed MBE apparature is described. This apparature has the purpose to fabricate gold nanocrystals by means of the molecular-beam-epitaxy (MBE) procedure. In the fourth chapter the construction of the DXT laboratory are presented and its beam profile in the focus, its divergence, and its beam spectrum determined. Based on this in the fifth chapter the study of the radiation damage of 2 cysteine-peroxyredoxine (2CP) proteins and the detection of this radiation damage without Au colloids and with Au colloids are presented. The main content of the sixth chapter is the precise

Differing manifestations of hepatitis C and tacrolimus on hospitalized diabetes mellitus occurring after kidney transplantation.

Science.gov (United States)

Abbott, Kevin C; Bernet, Victor J; Agodoa, Lawrence Y; Yuan, Christina M

2005-09-01

Previous studies suggest the association of recipient hepatitis C seropositivity (HCV+) and use of tacrolimus (TAC) with post-transplant diabetes mellitus (PTDM) may differ by manifestations of type I or type II diabetes, but this has not been assessed in the era of current immunosuppression. We performed a retrospective cohort study of 10,342 Medicare primary renal transplantation recipients without evidence of diabetes at the time of listing in the United States Renal Data System between January 1, 1998 and July 31, 2000, followed until December 31, 2000. Outcomes were hospitalizations for a primary diagnosis of diabetic ketoacidosis (DKA) or hyperglycemic hyperosmolar syndrome (HHS). Cox regression analysis was used to calculate adjusted hazard ratios (AHR) for time to DKA or HHS, stratified by diabetes status at the time of transplant. In Cox regression analysis, use of TAC at discharge was independently associated with shorter time to DKA (AHR, 1.88; 95% CI, 1.05-3.37, p=0.034) but not HHS. In contrast, recipient HCV+ was independently associated with shorter time to HHS (AHR, 3.90; 1.59-9.60, p=.003), but not DKA. There was no interaction between TAC and HCV+ for either outcome. These results confirm earlier findings that TAC and HCV+ may mediate the risk of PTDM through different mechanisms, even in the modern era.

Hydroxyapatite/MCM-41 and SBA-15 Nano-Composites: Preparation, Characterization and Applications

Science.gov (United States)

Anunziata, Oscar A.; Martínez, Maria L.; Beltramone, Andrea R.

2009-01-01

Composites of hydroxyapatite (HaP) and highly ordered large pore mesoporous silica molecular sieves such as, Al-SBA-15 and Al-MCM-41 (denoted as SBA-15 and MCM-41, respectively) were developed, characterized by XRD, BET, FTIR, HRTEM and NMR-MAS, and applied to fluoride retention from contaminated water. The proposed procedure by a new route to prepare the HaP/SBA-15 and HaP/MCM-41, composites generates materials with aluminum only in tetrahedral coordination, according to the 27Al NMR-MAS results. Free OH- groups of HaP nanocrystals, within the hosts, allowed high capacity fluoride retention. The activity of fluoride retention using HaP/MCM-41 or HaP/SBA-15 was 1-2 orders of magnitude greater, respectively, than with pure HaP.

Phosphoric acid doped membranes based on Nafion®, PBI and their blends – Membrane preparation, characterization and steam electrolysis testing

DEFF Research Database (Denmark)

Aili, David; Hansen, Martin Kalmar; Pan, Chao

2011-01-01

Proton exchange membrane steam electrolysis at temperatures above 100 °C has several advantages from thermodynamic, kinetic and engineering points of view. A key material for this technology is the high temperature proton exchange membrane. In this work a novel procedure for preparation of Nafion......® and polybenzimidazole blend membranes was developed. Homogeneous binary membranes covering the whole composition range were prepared and characterized with respect to chemical and physiochemical properties such as water uptake, phosphoric acid doping, oxidative stability, mechanical strength and proton conductivity...

Preparation and Characterization of UV-Curable Cyclohexanone-Formaldehyde Resin and Its Cured Film Properties

Directory of Open Access Journals (Sweden)

Guang Yang

2014-01-01

Full Text Available UV-curable cyclohexanone-formaldehyde (UVCF resin was prepared with cyclohexanone-formaldehyde (CF resin, isophorone diisocyanate (IPDI, and pentaerythritol triacrylate (PETA as base substance, bridging agent, and functional monomer, respectively. The structure of UVCF was characterized by Fourier transform infrared spectroscopy (FT-IR, 1H-nuclear magnetic resonance spectroscopy (1H-NMR, and gel permeation chromatography (GPC. The viscosity and photopolymerization behavior of the UV-curable formulations were studied. The thermal stability and mechanical properties of the cured films were also investigated. The results showed that UVCF resin was successfully prepared, the number of average molecular weight was about 2010, and its molecular weight distribution index was 2.8. With the increase of UVCF resin content, the viscosity of the UV-curable formulations increased. After exposure to UV irradiation for 230 s, the photopolymerization conversion of the UV-curable formulations was above 80%. Moreover, when the UVCF content was 60%, the formulations had high photopolymerization rate, and the cured UVCF films showed good thermal stability and mechanical properties.

Quality control provisions applied in the preparation and characterization of Pu-bearing PERLA standards

International Nuclear Information System (INIS)

Guardini, S.; Guzzi, G.; Mousty, F.; Kuhn, E.; Regge, P. de

1990-01-01

This report describes the work carried out at the different laboratories where Pu-bearing samples, intended for use as reference materials for NDA measurements, were prepared and characterized. The standard samples were produced from PuO2 and MOX batches of different nature and are at present stored in the PERLA facility at the Institute for Safety Technology of the JRC Ispra and are available for use. Particular attention is paid to the quality control procedures adopted during the sampling, preparation and analysis of the material, to fulfil the requirements established a priori for NDA standards to be used in Safeguards. The results of the different quality control checks are presented and discussed. The drawings of the containers for the PuO2 and MOX powders and of the special fuel rods for MOX pellets are also presented. This report is intended for use in conjunction with the PERLA STANDARD CERTIFICATES which are issued for each type of material considered, and gives to the user the possibility of tracing all analytical data back to primary standards

Preparation and characterization of dimeric and tetrameric clusters of molybdenum and tungsten

Energy Technology Data Exchange (ETDEWEB)

Ryan, T.R.

1981-10-01

The cyclo-addition of two Mo/sub 2/Cl/sub 4/(P(C/sub 6/H/sub 5/)/sub 3/)/sub 2/(CH/sub 3/OH)/sub 2/ molecules has produced a new type of tetrameric molybdenum cluster, Mo/sub 4/Cl/sub 8/L/sub 4/. Structural characterization of this dimer revealed weak molybdenum-methanol bonding which was consistent with the observed reactivity of the compound. New synthetic methods were devised for the preparation of Mo/sub 4/X/sub 8/L/sub 4/ clusters where X = Cl, Br, I and L = PR/sub 3/, Po/sub 3/, RCN, CH/sub 3/OH. A scheme for the metal-metal bonding in these clusters was presented which was in agreement with the known structural features of Mo/sub 4/Cl/sub 8/(PR/sub 3/)/sub 4/, R = C/sub 2/H/sub 5/, n-C/sub 4/H/sub 9/. The preparation of the analogous W/sub 4/Cl/sub 8/(PR/sub 3/)/sub 4/ cluster from WCl/sub 4/ was accomplished by application of techniques used in the molybdenum syntheses. The single crystal x-ray structure revealed slight differences from the molybdenum analog which were rationalized in terms of the known behavior in dimeric tungsten and molybdenum species. The attempted preparation of a tetrameric tungsten cluster from W/sub 2/(mhp)/sub 4/ was unsuccessful (mhp = anion of 2-methyl-6-hydroxypyridine). Instead, the new tungsten dimer, W/sub 2/Cl/sub 2/(mhp)/sub 3/, was isolated which possessed a metal-metal bond order of 3.5. The x-ray crystal structure of the dimer revealed that the chlorine atoms were situated cis, one bound to each tungsten. Cyclic voltammetry showed that the compound could be reversibly reduced, presumably to a W/sub 2//sup 4 +/ dimer containing a quadruple metal-metal bond.

Preparation and Characterization of Extruded Composites Based on Polypropylene and Chitosan Compatibilized with Polypropylene-Graft-Maleic Anhydride

Science.gov (United States)

Carrasco-Guigón, Fernando Javier; Rodríguez-Félix, Dora Evelia; Castillo-Ortega, María Mónica; Santacruz-Ortega, Hisila C.; Burruel-Ibarra, Silvia E.; Encinas-Encinas, Jose Carmelo; Plascencia-Jatomea, Maribel; Herrera-Franco, Pedro Jesus; Madera-Santana, Tomas Jesus

2017-01-01

The preparation of composites of synthetic and natural polymers represent an interesting option to combine properties; in this manner, polypropylene and chitosan extruded films using a different proportion of components and polypropylene-graft-maleic anhydride (PPgMA) as compatibilizer were prepared. The effect of the content of the biopolymer in the polypropylene (PP) matrix, the addition of compatibilizer, and the particle size on the properties of the composites was analyzed using characterization by fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), tensile strength, and contact angle, finding that in general, the addition of the compatibilizer and reducing the particle size of the chitosan, favored the physicochemical and morphological properties of the films. PMID:28772464

Preparation and characterization of several transition metal oxides

International Nuclear Information System (INIS)

Wold, A.; Dwight, K.

1989-01-01

The structure-property relationships of several conducting transition metal oxides, as well as their preparative methods, are presented in this paper. The importance of preparing homogeneous phases with precisely known stoichiometry is emphasized. A comparison is also made of the various techniques used to prepare both polycrystalline and single crystal samples. For transition metal oxides, the metallic properties are discussed either in terms of metal-metal distances which are short enough to result in metallic behavior, or in terms of the formation of a π* conduction band resulting from covalent metal-oxygen interactions. Metallic behavior is observed when the conduction bands are populated with either electrons or holes. The concentration of these carriers can be affected by either cation or anion substitutions. The discussion in this presentation will be limited to the elements Re, Ti, V, Cr, Mo, and Cu

Preparation and characterization of titanate nanotubes/carbon composites

International Nuclear Information System (INIS)

Wang Xiaodong; Pan Hui; Xue Xiaoxiao; Qian Junjie; Yu Laigui; Yang Jianjun; Zhang Zhijun

2011-01-01

Highlights: → Titanate nanotubes/carbon composites were synthesized from TiO 2 -carbon composites. → The carbon shell of TiO 2 particles obstructed the reaction between TiO 2 and NaOH. → TEM, XRD, and Raman spectra reveal the formation processes of the TNT/CCs. - Abstract: Titanate nanotubes/carbon composites(TNT/CCs) were synthesized by allowing carbon-coated TiO 2 (CCT) powder to react with a dense aqueous solution of NaOH at 120 deg. C for a proper period of time. As-prepared CCT and TNT/CCs were characterized by means of transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectrometry. The processes for formation of titanate nanotubes/carbon composites were discussed. It was found that the TiO 2 particles in TiO 2 -carbon composite were enwrapped by a fine layer of carbon with a thickness of about 4 nm. This carbon layer functioned to inhibit the transformation from anatase TiO 2 to orthorhombic titanate. As a result, the anatase TiO 2 in CCT was incompletely transformed into orthorhombic titanate nanotubes upon 24 h of reaction in the dense and hot NaOH solution. When the carbon layers were gradually peeled off along with the formation of more orthorhombic titanate nanotubes at extended reaction durations (e.g., 72 h), anatase TiO 2 particles in CCT were completely transformed into orthorhombic titanate nanotubes, yielding TNT/CCs whose morphology was highly dependent on the reaction time and temperature.

Preparation and Characterization of Porous Calcium Phosphate Bioceramics

Institute of Scientific and Technical Information of China (English)

Honglian Dai; Xinyu Wang; Yinchao Han; Xin Jiang; Shipu Li

2011-01-01

β-tricalcium phosphate (β-TCP) powder and Na2O-CaO-MgO-P2O5 glass binder were synthesized and mixed, and then the biodegradable porous calcium phosphate ceramics were successfully prepared by foaming and sintering at 850℃. The as-prepared ceramics possess a high porosity with partial three-dimension interconnected macro- and micro-pores. As in vitro experiment testified, the calcium phosphate ceramics (CPCs) has good degradability.

Preparation and characterization of carbon nanofibrous/hydroxyapatite sheets for bone tissue engineering.

Science.gov (United States)

Abd El-Aziz, A M; El Backly, Rania M; Taha, Nahla A; El-Maghraby, Azza; Kandil, Sherif H

2017-07-01

Critical size bone defects are orthopedic defects that will not heal without intervention or that will not completely heal over the natural life time of the animal. Although bone generally has the ability to regenerate completely however, critical defects require some sort of scaffold to do so. In the current study we proposed a method to obtain a carbon nanofibrous/Hydroxyapatite (HA) bioactive scaffold. The carbon nanofibrous (CNF) nonwoven fabrics were obtained by the use of the electrospinning process of the polymeric solution of poly acrylonitrile "PAN" and subsequent stabilization and carbonization processes. The CNFs sheets were functionalized by both hydroxyapatite (HA) and bovine serum albumin (BSA). The HA was added to the electrospun solution, but in case of (BSA), it was adsorbed after the carbonization process. The changes in the properties taking place in the precursor sheets were investigated using the characterization methods (SEM, FT-IR, TGA and EDX). The prepared materials were tested for biocompatibility via subcutaneous implantation in New Zealand white rabbits. We successfully prepared biocompatible functionalized sheets, which have been modified with HA or HA and BSA. The sheets that were functionalized by both HA and BSA are more biocompatible with fewer inflammatory cells of (neutrophils and lymphocytes) than ones with only HA over the period of 3weeks. Copyright © 2017 Elsevier B.V. All rights reserved.

Nanoclay embedded mixed matrix PVDF nanocomposite membrane: Preparation, characterization and biofouling resistance

International Nuclear Information System (INIS)

Rajabi, Hamid; Ghaemi, Negin; Madaeni, Sayed S.; Daraei, Parisa; Khadivi, Mohammad Ali; Falsafi, Monir

2014-01-01

Highlights: • Nanocomposite membranes were prepared by addition of OMMT to PVDF membrane. • Addition of nanoclay considerably increased the hydrophilicity of PVDF membrane. • Nanocomposite membranes had higher water flux and antifouling properties. • Fouling of membranes blended with nanoclay (<4 wt.%) reduced. - Abstract: In this paper, nanocomposite PVDF/nanoclay membranes were prepared with addition of different concentrations of organically modified montmorillonite (OMMT) into the polymeric casting solution using combination of solution dispersion and phase inversion methods. Membranes were characterized by use of X-ray diffraction (XRD), water contact angle, scanning electron microscopy (SEM) and atomic force microscopy (AFM), and their performances were evaluated in terms of pure water flux and fouling parameters. The surface hydrophilicity of all nanocomposites markedly improved compared to nascent PVDF. In addition, XRD patterns revealed the formation of intercalated layers of mineral clays in PVDF matrix. SEM and AFM images showed that addition of OMMT resulted in nanocomposite membranes with thinner skin layer and higher porosity rather than PVDF membranes. Pure water flux of PVDF/OMMT membranes increased significantly (particularly for fabricated membranes by 4 and 6 wt.% OMMT) compared to that of PVDF membrane. Moreover, nanocomposite membranes showed the elevated antifouling properties, and flux recovery of nascent PVDF membranes increased from 51 to 72% with addition of 2 wt.% OMMT nanoparticles. These nanocomposite membranes also offered a remarkable reusability and durability against biofouling

Preparation, Characterization and Properties of Alginate/Poly(γ-glutamic acid) Composite Microparticles.

Science.gov (United States)

Tong, Zongrui; Chen, Yu; Liu, Yang; Tong, Li; Chu, Jiamian; Xiao, Kecen; Zhou, Zhiyu; Dong, Wenbo; Chu, Xingwu

2017-04-11

Alginate (Alg) is a renewable polymer with excellent hemostatic properties and biocapability and is widely used for hemostatic wound dressing. However, the swelling properties of alginate-based wound dressings need to be promoted to meet the requirements of wider application. Poly( γ -glutamic acid) (PGA) is a natural polymer with high hydrophility. In the current study, novel Alg/PGA composite microparticles with double network structure were prepared by the emulsification/internal gelation method. It was found from the structure characterization that a double network structure was formed in the composite microparticles due to the ion chelation interaction between Ca 2+ and the carboxylate groups of Alg and PGA and the electrostatic interaction between the secondary amine group of PGA and the carboxylate groups of Alg and PGA. The swelling behavior of the composite microparticles was significantly improved due to the high hydrophility of PGA. Influences of the preparing conditions on the swelling behavior of the composites were investigated. The porous microparticles could be formed while compositing of PGA. Thermal stability was studied by thermogravimetric analysis method. Moreover, in vitro cytocompatibility test of microparticles exhibited good biocompatibility with L929 cells. All results indicated that such Alg/PGA composite microparticles are a promising candidate in the field of wound dressing for hemostasis or rapid removal of exudates.

Nanoclay embedded mixed matrix PVDF nanocomposite membrane: Preparation, characterization and biofouling resistance

Energy Technology Data Exchange (ETDEWEB)

Rajabi, Hamid [Membrane Research Centre, Department of Chemical Engineering, Razi University, Tagh Bostan, 67149 Kermanshah (Iran, Islamic Republic of); Department of Civil Engineering, Razi University, 67149 Kermanshah (Iran, Islamic Republic of); Ghaemi, Negin, E-mail: negin_ghaemi@kut.ac.ir [Department of Chemical Engineering, Kermanshah University of Technology, 67178 Kermanshah (Iran, Islamic Republic of); Madaeni, Sayed S. [Membrane Research Centre, Department of Chemical Engineering, Razi University, Tagh Bostan, 67149 Kermanshah (Iran, Islamic Republic of); Daraei, Parisa [Department of Chemical Engineering, Kermanshah University of Technology, 67178 Kermanshah (Iran, Islamic Republic of); Khadivi, Mohammad Ali [Friedrich-Alexander University, Erlangen-Nuremberg, Egerland Strasse 3, D-91058 Erlangen (Germany); Falsafi, Monir [Department of Chemistry, Faculty of Science, Razi University, 67149 Kermanshah (Iran, Islamic Republic of)

2014-09-15

Highlights: • Nanocomposite membranes were prepared by addition of OMMT to PVDF membrane. • Addition of nanoclay considerably increased the hydrophilicity of PVDF membrane. • Nanocomposite membranes had higher water flux and antifouling properties. • Fouling of membranes blended with nanoclay (<4 wt.%) reduced. - Abstract: In this paper, nanocomposite PVDF/nanoclay membranes were prepared with addition of different concentrations of organically modified montmorillonite (OMMT) into the polymeric casting solution using combination of solution dispersion and phase inversion methods. Membranes were characterized by use of X-ray diffraction (XRD), water contact angle, scanning electron microscopy (SEM) and atomic force microscopy (AFM), and their performances were evaluated in terms of pure water flux and fouling parameters. The surface hydrophilicity of all nanocomposites markedly improved compared to nascent PVDF. In addition, XRD patterns revealed the formation of intercalated layers of mineral clays in PVDF matrix. SEM and AFM images showed that addition of OMMT resulted in nanocomposite membranes with thinner skin layer and higher porosity rather than PVDF membranes. Pure water flux of PVDF/OMMT membranes increased significantly (particularly for fabricated membranes by 4 and 6 wt.% OMMT) compared to that of PVDF membrane. Moreover, nanocomposite membranes showed the elevated antifouling properties, and flux recovery of nascent PVDF membranes increased from 51 to 72% with addition of 2 wt.% OMMT nanoparticles. These nanocomposite membranes also offered a remarkable reusability and durability against biofouling.

Materials Preparation Center

Data.gov (United States)

Federal Laboratory Consortium — MPC is recognized throughout the worldwide research community for its unique capabilities in purification, preparation, and characterization of: rare earth metals,...

Preparation, Characterization and Thermal Degradation of Polyimide (4-APS/BTDA/SiO2 Composite Films

Directory of Open Access Journals (Sweden)

Arash Dehzangi

2012-04-01

Full Text Available Polyimide/SiO2 composite films were prepared from tetraethoxysilane (TEOS and poly(amic acid (PAA based on aromatic diamine (4-aminophenyl sulfone (4-APS and aromatic dianhydride (3,3,4,4-benzophenonetetracarboxylic dianhydride (BTDA via a sol-gel process in N-methyl-2-pyrrolidinone (NMP. The prepared polyimide/SiO2 composite films were characterized using X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FTIR, scanning electron microscope (SEM and thermogravimetric analysis (TGA. The FTIR results confirmed the synthesis of polyimide (4-APS/BTDA and the formation of SiO2 particles in the polyimide matrix. Meanwhile, the SEM images showed that the SiO2 particles were well dispersed in the polyimide matrix. Thermal stability and kinetic parameters of the degradation processes for the prepared polyimide/SiO2 composite films were investigated using TGA in N2 atmosphere. The activation energy of the solid-state process was calculated using Flynn–Wall–Ozawa’s method without the knowledge of the reaction mechanism. The results indicated that thermal stability and the values of the calculated activation energies increased with the increase of the TEOS loading and the activation energy also varied with the percentage of weight loss for all compositions.

Preparation and Characterization of Promoted Fe-V/SiO2 Nanocatalysts for Oxidation of Alcohols

Directory of Open Access Journals (Sweden)

Hamid Reza Rafiee

2013-01-01

Full Text Available A series of SiO2 supported iron-vanadium catalysts were prepared using sol-gel and wetness impregnation methods. This research investigates the effects of V and Cu on the structure and morphology of Fe/SiO2 catalysts. The SiO2 supported catalyst with the highest specific surface area and pore volume was obtained when it is containing 40 wt.% Fe, 15 wt.% V, and 2 wt.% Cu. Characterization of prepared catalysts was carried out by powder X-ray diffraction (XRD, scanning electron microcopy (SEM, vibrating sample magnetometry (VSM, Fourier transform infrared (FT-IR spectrometry, temperature program reduction (TPR, N2 physisorption, and thermal analysis methods such as thermal gravimetric analysis (TGA and differential scanning calorimetry (DSC. The Fe-V/SiO2 catalyst promoted with 2 wt.% of Cu exhibited typical ferromagnetic behavior at room temperature with a saturation magnetization value of 11.44 emu/g. This character of catalyst indicated great potential for application in magnetic separation technologies. The prepared catalyst was found to act as an efficient recoverable nanocatalyst for oxidation reaction of alcohols to aldehydes and ketones in aqueous media under mild condition. Moreover, the catalyst was reused five times without significant degradation in catalytic activity and performance.

Preparation, characterization, and antibacterial activity studies of silver-loaded poly(styrene-co-acrylic acid) nanocomposites.

Science.gov (United States)

Song, Cunfeng; Chang, Ying; Cheng, Ling; Xu, Yiting; Chen, Xiaoling; Zhang, Long; Zhong, Lina; Dai, Lizong

2014-03-01

A simple method for preparing a new type of stable antibacterial agent was presented. Monodisperse poly(styrene-co-acrylic acid) (PSA) nanospheres, serving as matrices, were synthesized via soap-free emulsion polymerization. Field-emission scanning electron microscopy micrographs indicated that PSA nanospheres have interesting surface microstructures and well-controlled particle size distributions. Silver-loaded poly(styrene-co-acrylic acid) (PSA/Ag-NPs) nanocomposites were prepared in situ through interfacial reduction of silver nitrate with sodium borohydride, and further characterized by transmission electron microscopy and X-ray diffraction. Their effects on antibacterial activity including inhibition zone, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and bactericidal kinetics were evaluated. In the tests, PSA/Ag-NPs nanocomposites showed excellent antibacterial activity against both gram-positive Staphylococcus aureus and gram-negative Escherichia coli. These nanocomposites are considered to have potential application in antibacterial coatings on biomedical devices to reduce nosocomial infection rates. Copyright © 2013 Elsevier B.V. All rights reserved.

Association of the PPP3CA c.249G>A variant with clinical outcomes of tacrolimus-based therapy in kidney transplant recipients

Directory of Open Access Journals (Sweden)

Salgado PC

2017-03-01

Full Text Available Patricia C Salgado,1 Fabiana DV Genvigir,1 Claudia R Felipe,2 Helio Tedesco-Silva Jr,2 Jose O Medina-Pestana,2 Sonia Q Doi,3 Mario H Hirata,1 Rosario DC Hirata1 1Department of Clinical and Toxicological Analysis, School of Pharmaceutical Sciences, University of Sao Paulo, 2Division of Nephrology, Hospital do Rim, Federal University of Sao Paulo, Sao Paulo, Brazil; 3School of Medicine, Uniformed Services University of the Health Sciences, Bethesda, MD, USA Background: The effects of genetic variants related to the pharmacodynamic mechanisms of immunosuppressive drugs on their therapeutic efficacy and safety have been poorly explored. This study was performed to investigate the influence of the PPP3CA c.249G>A variant on the clinical outcomes of kidney transplant recipients. Patients and methods: A total of 148 Brazilian patients received tacrolimus (TAC-based immunosuppressive therapy for 90 days post-kidney transplantation. The PPP3CA rs3730251 (c.249G>A polymorphism was determined by real-time polymerase chain reaction. Single-nucleotide polymorphism (SNP data for CYP3A5 rs776746 (CYP3A5*3C; g.6986A>G were used to eliminate the confounding effects of this variant. Results: The PPP3CA c.249G>A SNP did not influence early TAC exposure, renal function, or other laboratory parameters, including levels of urea, creatinine, glucose, and lipids, and blood counts. This variant also did not account for the cumulative incidence of biopsy-confirmed acute rejection or delayed graft function. Regarding adverse events, PPP3CA c.249A allele carriers initially had a 3.05-fold increased probability of treatment-induced blood and lymphatic system disorders compared with c.249GG genotype individuals (95% confidence interval: 1.10–8.48, p=0.032. However, this result was not maintained after adjusting for body weight and CYP3A5*3C SNP status (p=0.086. Conclusion: The PPP3CA c.249G>A variant does not influence the clinical outcomes of Brazilian patients in the

Preparation and Characterization of Solid Dispersions of Artemether by Freeze-Dried Method