Quality management system

Energy Technology Data Exchange (ETDEWEB)

Lee, Mu Sung

2009-08-15

This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

Quality management system

International Nuclear Information System (INIS)

Lee, Mu Sung

2009-08-01

This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

INTEGRATIVE AUGMENTATION OF STANDARDIZED MANAGEMENT SYSTEMS

Directory of Open Access Journals (Sweden)

Stanislav Karapetrovic

2008-03-01

Full Text Available The development, features and integrating abilities of different international standards related to management systems are discussed. A group of such standards that augment the performance of quality management systems in organizations is specifically focused on. The concept, characteristics and an illustrative example of one augmenting standard, namely ISO 10001, are addressed. Integration of standardized augmenting systems, both by themselves and within the overall management system, is examined. It is argued that, in research and practice alike, integrative augmentation represents the future of standardized quality and other management systems.

A case study: forming an effective quality management system according to ISO 9000 standards

OpenAIRE

Zağyapan, Orhan

1995-01-01

Ankara : The Faculty of Management and the Graduate School of Business Administration of Bilkent Univ., 1995. Thesis (Master's) -- Bilkent University, 1995. Includes bibliographical references leaves 87-88 In today's world, companies which adopt themselves to certain internationally recognized standards are one step ahead of their competitors. ISO 9000 Quality System Standards captured the most attention among all. The aim of the standard is to provide an international bench...

Evaluating Education Quality in Terms of ISO9000 Standards

Science.gov (United States)

Fengchun, Cheng; Vogel, Linda R.; Zhaoyu, Zheng

2014-01-01

While nations measure the quality of educational systems by different standards, many nations, such as China, have adopted the ISO9000 quality standards to assess the quality of schools. This article explores the various elements of the the ISO9000 standards and how each element relates to the various groups that are consumers or stakeholders in…

Perceptions About The ISO 9000 Quality System Standard Revision And Its Value: The Dutch Experience

NARCIS (Netherlands)

A. van der Wiele (Ton); J.D. van Iwaarden (Jos); A.R.T. Williams (Roger); B.G. Dale (Barry)

2004-01-01

textabstractThe aim of the research reported in this paper is to assess the relative value of the 2000 version of the ISO 9000 series of quality management system standards in comparison to the 1994 version. 773 organisations in the Netherlands which have all been certified to the ISO 9000 standard

Implementation of quality standards in an individual monitoring service

Energy Technology Data Exchange (ETDEWEB)

Hyvoenen, H.; Vartiainen, E

2001-07-01

In this paper the implementation of a quality system to the procedures of an individual monitoring service (IMS) is described from the practical perspective. The IMS of the Radiation and Nuclear Safety Authority (STUK) is used as an example. The IMS of STUK monitors about 8500 persons mainly working in hospitals, industry and research centres. The current thermoluminescence dosemeter (TLD) system was introduced in 1992 and the whole service changed to TLDs in 1995. The quality system compatible with the quality standards was introduced in 1999. An application for accreditation to full EN45001 and ISO/IEC Guide 25 was made in December 1999, accreditation was achieved in August 2000 by the Finnish Accreditation Service (FINAS). The considerations needed for the quality system to fulfil the requirements of the quality standards are reported. (author)

Implementation of quality standards in an individual monitoring service

International Nuclear Information System (INIS)

Hyvoenen, H.; Vartiainen, E.

2001-01-01

In this paper the implementation of a quality system to the procedures of an individual monitoring service (IMS) is described from the practical perspective. The IMS of the Radiation and Nuclear Safety Authority (STUK) is used as an example. The IMS of STUK monitors about 8500 persons mainly working in hospitals, industry and research centres. The current thermoluminescence dosemeter (TLD) system was introduced in 1992 and the whole service changed to TLDs in 1995. The quality system compatible with the quality standards was introduced in 1999. An application for accreditation to full EN45001 and ISO/IEC Guide 25 was made in December 1999, accreditation was achieved in August 2000 by the Finnish Accreditation Service (FINAS). The considerations needed for the quality system to fulfil the requirements of the quality standards are reported. (author)

Quality of semantic standards

NARCIS (Netherlands)

Folmer, Erwin Johan Albert

2012-01-01

Little scientific literature addresses the issue of quality of semantic standards, albeit a problem with high economic and social impact. Our problem survey, including 34 semantic Standard Setting Organizations (SSOs), gives evidence that quality of standards can be improved, but for improvement a

Quality control with R an ISO standards approach

CERN Document Server

Cano, Emilio L; Prieto Corcoba, Mariano

2015-01-01

Presenting a practitioner's guide to capabilities and best practices of quality control systems using the R programming language, this volume emphasizes accessibility and ease-of-use through detailed explanations of R code as well as standard statistical methodologies. In the interest of reaching the widest possible audience of quality-control professionals and statisticians, examples throughout are structured to simplify complex equations and data structures, and to demonstrate their applications to quality control processes, such as ISO standards. The volume balances its treatment of key aspects of quality control, statistics, and programming in R, making the text accessible to beginners and expert quality control professionals alike. Several appendices serve as useful references for ISO standards and common tasks performed while applying quality control with R.

Quality control and quality standards for the production of bone allografts in China

International Nuclear Information System (INIS)

Sun Shiquan; Li Youchen

1999-01-01

There is a rapid progress of tissue banking especially Bone Banking in China, In order to strengthen the control on medical devices, Ministry of Public Health (MPH) issued the 'Regulation on Supervision of Critical Medical Devices, MPH Decree No. 54' in 1997. The SPTB was requested to submit new application for the approval of production and providing of tissue allografts. The needed documents are clinical reports, package insert, quality standards of product, Quality System Regulation (QSR) and audit report. Quality System Regulation document adopted the GMP standard for medical devices of FDA, US (21 CFR 620-1997). SPTB will amend the existed Quality Manual to suit the requirement of QSR. Referring to the AATB Standards, SPTB established 'Technical Standards' for Tissue Banking and was approved by the local government, which will be the supplement of the submitted QSR document. Considering the need of market control, MPH requested to submit a 'Quality Standard of Product' and the method of inspection. SPTB has completed such standards for final inspection of bone products, which includes the test for residual water, microbiology, bone species, colour and structure. In addition, the Tissue Bank has completed standards for in process inspection, which includes residual blood, radiation sterilization, initial bioburden, package leakage and biomechanics. In-process inspection is important for the control of non-conforming final products to assure the safety and efficacy of bone grafts. Methods of in process inspection and final inspection are described and discussed in this paper

ISO 9001:2000--setting the standard for quality management.

Science.gov (United States)

Edelstein, M E

2001-04-01

How will you approach the next quality management initiative? This article offers an introduction to the ISO 9001:2000 quality management system standards that can be applied to the HIM industry and how these standards can improve your department's policies and procedures.

Management system - correlation study between new IAEA standards and the market standards

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Dirceu Paulo de [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), Ipero, SP (Brazil)], e-mail: dirceupo@hotmail.com; Zouain, Desiree Moraes [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: dmzouain@ipen.br

2009-07-01

In order to answer the growing concern of society with respect of the aspects that affect the quality of life, international and national regulatory bodies have developed standards that enable organizations to establish management systems for quality, environment and sustainable development, health, safety and social responsibility, among other functions. Within this context it is necessary to structure an integrated management system that promotes interests compatibility of several distinct and complementary functions involved. Considering this vision of the management system integration, the International Atomic Energy Agency (IAEA) decided to review the structure of safety standards on Quality Assurance - code and guides 50-C/SGQ1/ 14:1996, publishing, in 2006, IAEA GS-R-3 and IAEA GS-G-3.1 standards, enlarging the management approach of the previous standards, including the possibility of integrating the functions foremost mentioned. This paper presents the results about a correlation study between IAEA management system standards - IAEA GS-R-3: 2006, IAEA GS-G-3.1: 2006 and IAEA DS349 rev. 2007, this latter still a draft standard, with those market management system standards on quality - ISO 9001:2008, environmental - ISO 14001:2004, and occupational health and safety - BS OHSAS 18001:2007, identifying gaps, redundancies and complementarities among their requirements and guidances. The purpose of the study is to provide subsidies that could contribute to the structuring of a management system to nuclear facilities that satisfies, in an integrated manner, the common and complementary requirements and guidances of IAEA and market standards. (author)

Management system - correlation study between new IAEA standards and the market standards

International Nuclear Information System (INIS)

Oliveira, Dirceu Paulo de; Zouain, Desiree Moraes

2009-01-01

In order to answer the growing concern of society with respect of the aspects that affect the quality of life, international and national regulatory bodies have developed standards that enable organizations to establish management systems for quality, environment and sustainable development, health, safety and social responsibility, among other functions. Within this context it is necessary to structure an integrated management system that promotes interests compatibility of several distinct and complementary functions involved. Considering this vision of the management system integration, the International Atomic Energy Agency (IAEA) decided to review the structure of safety standards on Quality Assurance - code and guides 50-C/SGQ1/ 14:1996, publishing, in 2006, IAEA GS-R-3 and IAEA GS-G-3.1 standards, enlarging the management approach of the previous standards, including the possibility of integrating the functions foremost mentioned. This paper presents the results about a correlation study between IAEA management system standards - IAEA GS-R-3: 2006, IAEA GS-G-3.1: 2006 and IAEA DS349 rev. 2007, this latter still a draft standard, with those market management system standards on quality - ISO 9001:2008, environmental - ISO 14001:2004, and occupational health and safety - BS OHSAS 18001:2007, identifying gaps, redundancies and complementarities among their requirements and guidances. The purpose of the study is to provide subsidies that could contribute to the structuring of a management system to nuclear facilities that satisfies, in an integrated manner, the common and complementary requirements and guidances of IAEA and market standards. (author)

Organizational, technical, physical and clinical quality standards for radiotherapy

Science.gov (United States)

Bogusz-Czerniewicz, Marta; Kaźmierczak, Daniel

2012-01-01

Background Indisputably, radiotherapy has become an entirely interdisciplinary specialty. This situation requires efficient planning, verification, monitoring, quality control and constant improvement of all aspects of service delivery, referring both to patients’ (including diagnosis, prescription and method of treatment, its justification, realization and follow up) and organizational, technical and physics matters. Aim The aim of this work was to develop technical, physics and clinical quality standards for radiotherapy. This paper presents chosen standards for each of the aforementioned category. Materials and methods For the development of quality standards the comparison analysis of EU and Polish acts of law passed between 1980 and 2010 was conducted, the universal industrial ISO norm 9001:2008 referring to quality management system was reviewed. Recommendations of this norm were completed with detailed quality standards based on the author's 11 year work experience and the review of articles on quality assurance and quality control standards for radiotherapy published between 1984 and 2009 and the review of current recommendations and guidelines of American, International, European and National bodies (associations, societies, agencies such as AAPM, ESTRO, IAEA, and OECI) for quality assurance and quality management in radiotherapy. Results As a result 352 quality standards for radiotherapy were developed and categorized into the following three groups: (1) organizational standards, (2) physics and technical standards and (3) clinical standards. Conclusions Proposed quality standards for radiotherapy, can be used by any institution using ionizing radiation for medical procedures. Nevertheless standards are only of value if they are implemented, reviewed, audited and improved and if there is a clear mechanism in place to monitor and address failure to meet agreed standards. PMID:24377023

Quality Management Systems And Impact From Standardization In Albanian Companies

Directory of Open Access Journals (Sweden)

Ira Zoga Gjika

2015-08-01

Full Text Available The increase of competition in the local and regional markets is forcing companies to provide high quality products and services as well as to continuously improve their activities. The quality management systems and standard implementation in Albanian companies are the at the focus of this paper with the intention to evidence the actual situation and the results achieved from the certification process. The implementation of ISO standard requirements together with the assessment of the benefits deriving from it is a relatively new experience for Albanian companies and slightly developed in our economic literature. Consequently this work follows a combined approach of reviewing the relevant rich literature of the last decades with the empirical survey of some Albanian companies that have chosen ISO certification as an instrument to gain competitive advantage in the market. The analysis of factors that drive companies towards such time consuming costly and managerially- wise committed process is one of main study objectives. It is followed by the assessment of benefits deriving from this process for companies in quantitative and qualitative terms. Comparing the expected advantages from the certification with those actually obtained might assist companies themselves to improve their processes. From the other side this comparison serves as a basis for suggestions and recommendations to other companies that intend to make good use of advantages the ISO certification.

Review and comparison of quality standards, guidelines and regulations for laboratories

Directory of Open Access Journals (Sweden)

Tjeerd A.M. Datema

2011-12-01

Full Text Available Background: The variety and number of laboratory quality standards, guidelines and regulations (hereafter: quality documents makes it difficult to choose the most suitable one for establishing and maintaining a laboratory quality management system. Objectives: There is a need to compare the characteristics, suitability and applicability of quality documents in view of the increasing efforts to introduce quality management in laboratories, especially in clinical diagnostic laboratories in low income and middle income countries. This may provide valuable insights for policy makers developing national laboratory policies, and for laboratory managers and quality officers in choosing the most appropriate quality document for upgrading their laboratories. Method: We reviewed the history of quality document development and then selected a subset based on their current use. We analysed these documents following a framework for comparison of quality documents that was adapted from the Clinical Laboratory Standards Institute guideline GP26 Quality management system model for clinical laboratory services. Results: Differences were identified between national and international, and non-clinical and clinical quality documents. The most salient findings were the absence of provisions on occurrence management and customer service in almost all non-clinical quality documents, a low number of safety requirements aimed at protecting laboratory personnel in international quality documents and no requirements regarding ethical behaviour in almost all quality documents. Conclusion: Each laboratory needs to investigate whether national regulatory standards are present. These are preferred as they most closely suit the needs of laboratories in the country. A laboratory should always use both a standard and a guideline: a standard sums up the requirements to a quality management system, a guideline describes how quality management can be integrated in the laboratory

Ambient assisted living healthcare frameworks, platforms, standards, and quality attributes.

Science.gov (United States)

Memon, Mukhtiar; Wagner, Stefan Rahr; Pedersen, Christian Fischer; Beevi, Femina Hassan Aysha; Hansen, Finn Overgaard

2014-03-04

Ambient Assisted Living (AAL) is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions.

Ambient Assisted Living Healthcare Frameworks, Platforms, Standards, and Quality Attributes

Directory of Open Access Journals (Sweden)

Mukhtiar Memon

2014-03-01

Full Text Available Ambient Assisted Living (AAL is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions.

Standardization and quality management in next-generation sequencing.

Science.gov (United States)

Endrullat, Christoph; Glökler, Jörn; Franke, Philipp; Frohme, Marcus

2016-09-01

DNA sequencing continues to evolve quickly even after > 30 years. Many new platforms suddenly appeared and former established systems have vanished in almost the same manner. Since establishment of next-generation sequencing devices, this progress gains momentum due to the continually growing demand for higher throughput, lower costs and better quality of data. In consequence of this rapid development, standardized procedures and data formats as well as comprehensive quality management considerations are still scarce. Here, we listed and summarized current standardization efforts and quality management initiatives from companies, organizations and societies in form of published studies and ongoing projects. These comprise on the one hand quality documentation issues like technical notes, accreditation checklists and guidelines for validation of sequencing workflows. On the other hand, general standard proposals and quality metrics are developed and applied to the sequencing workflow steps with the main focus on upstream processes. Finally, certain standard developments for downstream pipeline data handling, processing and storage are discussed in brief. These standardization approaches represent a first basis for continuing work in order to prospectively implement next-generation sequencing in important areas such as clinical diagnostics, where reliable results and fast processing is crucial. Additionally, these efforts will exert a decisive influence on traceability and reproducibility of sequence data.

Quality assurance requirements in various codes and standards

International Nuclear Information System (INIS)

Shaaban, H.I.; EL-Sayed, A.; Aly, A.E.

1987-01-01

The quality assurance requirements in various countries and according to various international codes and standards are presented, compared and critically discussed. Cases of developing countries are also discussed, and the use of IAEA code of practice and other codes for quality assurance in these countries is reviewed. Recommendations are made regarding the quality assurance system to be applied for Egypt's nuclear power plants

Quality system in Malaysian National Tissue Bank

International Nuclear Information System (INIS)

Go Boon Thong; Firdaus, M. N.; Abd Rani Shamsudin

1999-01-01

Quality System in Malaysian National Tissue Bank is based on the Quality Manual which has been drawn up by the chairman, who is the Dean, School of Medical Sciences. The Quality Manual include general standard for Tissue Banking in University Science of Malaysia which describe and explain a set of general standard similar to the EATB standard. The primary aim of the quality system is to produce a safe and effective tissue graft for successful clinical use and to ensure the safety of tissue bank operators. The Quality Manual also related the role of a Technical Manual, which explain the standard of technical aspect of tissue bank in a Quality Assurance. The safe working environment and Good Laboratory Practice is highlight in Quality System. Documentation of tissue bank activities is the key to the administration to tissue bank. Finally Quality System in tissue banking will never be complete without a Tissue Bank Auditing System which allow the tissue bank coordinator and staff to look into the problem and further enhance the progress of the tissue bank

Requirements of quality standards

International Nuclear Information System (INIS)

Mueller, J.

1977-01-01

The lecture traces the development of nuclear standards, codes, and Federal regulations on quality assurance (QA) for nuclear power plants and associated facilities. The technical evolution of the last twelve years, especially in the area of nuclear technology, led to different activities and regulatory initiatives, and the present result is: several nations have their own homemade standards. The lecture discusses the former and especially current activities in standard development, and gives a description of the requirements of QA-standards used in USA and Europe, especially Western Germany. Furthermore the lecture attempts to give a comparison and an evaluation of the international quality standards from the author's viewpoint. Finally the lecture presents an outlook for the future international implications of QA-standards. There is an urgent need within the nuclear industry for simplification and standardization of QA-standards. The relationship between the various standards, and the applicability of the standards need clarification and a better transparancy. To point out these problems is the purpose of the lecture. (orig.) [de

Quality system for Medical laboratories

Directory of Open Access Journals (Sweden)

Shiva Raj K.C.

2015-03-01

Full Text Available According to William Edwards Deming “Good quality does not necessarily mean high quality. Instead it means a predicable degree of uniformity and dependability at low cost with a quality suited to the market.” Whereas according to famous engineer and management consultant Joseph M. Juran quality is “fitness for purpose”. It should meet the customers’ expectations and requirements, should be cost effective.ISO began in 1926 as the International Federation of the National Standardizing Associations (ISA. The name, "ISO" was derived from the Greek word "isos" meaning "equal". (The relation to standards is that if two objects meet the same standard, they should be equal. This name eliminates any confusion that could result from the translation of "International Organization for Standardization" into different languages which would lead to different acronyms.In health sector, quality plays pivotal role, as it is directly related to patient’s care. Earlier time, health service was simple, quite safe but ineffective. Now health care system is an organizational system with more complex processes to deliver care. Medical laboratory service is an integral part in patient’s management system. So, for everyone involved in the treatment of the patient, the accuracy, reliability and safety of those services must be the primary concerns. Accreditation is a significant enabler of quality, thereby delivering confidence to healthcare providers, clinicians, the medical laboratories and the patients themselves.ISO announced meeting in Philadelphia to form a technical committee to develop a new standard for medical laboratory quality. It took 7 years for the creation of a new Quality standard for medical laboratories. It was named as “ISO 15189” and was first published in 2003. The ISO has released three versions of the standard. The first two were released in 2003 and 2007. In 2012, a revised and updated version of the standard, ISO 15189

Quality standards and requirements for solid recovered fuels: a review.

Science.gov (United States)

Flamme, Sabine; Geiping, Julia

2012-04-01

The utilization of solid recovered fuels (SRF) for energy recovery has been increasing steadily in recent years, and this development is set to continue. In order to use SRF efficiently, it is necessary to define quality standards and introduce targeted quality assurance measures. SRF can be used both in mono-incineration and in co-incineration systems, for instance in power generation and cement plants; but as quality requirements differ, it is necessary to unambiguously define the term 'solid recovered fuel'. The purpose of this article is to provide an overview of the origin, development and the current status of quality assurance for SRF. The basic principles of quality assurance for SRF are explained with reference to the development of the German RAL Quality Assurance System and in addition specifications that have emerged from European standardization work of CEN/TC 343 are analysed.

Quality management system in ISTC 'Ukryttia'

International Nuclear Information System (INIS)

Ershova, N.N.; Klyuchnikov, A.A.; Lagutin, I.G.

2003-01-01

Some structural and certification aspects of ISTC 'Ukryttia' quality system are seen,and main principles of adaptation of existing quality system model to quality management system model in conformity with ISO 9001:2000 standard are shown

Small scale biomass heating systems: Standards, quality labelling and market driving factors - An EU outlook

International Nuclear Information System (INIS)

Verma, V.K.; De Ruyck, J.; Bram, S.

2009-01-01

In the present study a comparative evaluation of several existing quality labels and standards for small scale biomass heating systems (BHS) and the biomass fuels they use was performed. With the introduction of pellet fuels, biomass heating technology achieved enough maturity to successfully compete with oil/gas heating devices in terms of ease of use, utilization of energy and pollutant emissions. From indoor air quality and related health risks point of view, quality labelling of both BHS and fuel they use leads to stricter emissions, efficiency and safety requirements as compared to National and EU standards. Several measures supporting this green energy market in the active countries (Sweden, Nordic countries, Germany, France and Austria) were investigated. It was found that policies and financial incentives such as the Finance Law (2005-2009) in France and Market Incentives Programme (1999-2006) in Germany are the most successful. German regulations and quality label (Blue Angel) provide the stringent quality requirements for residential BHS. In Belgium, Wallonia is the most active region for biomass energy utilization (83.5 MW for residential heating in 2007). A quality label for small scale BHS however does not yet exist. An equivalent label (Optimaz) exists for oil fired residential boilers. Emphasis has been placed upon using Optimaz as a reference and to compare with other existing quality labels. As a result, an effort had been made to move ahead in the preliminary study for development of a quality label for Belgian. (author)

40 CFR 130.3 - Water quality standards.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Water quality standards. 130.3 Section... QUALITY PLANNING AND MANAGEMENT § 130.3 Water quality standards. A water quality standard (WQS) defines the water quality goals of a water body, or portion thereof, by designating the use or uses to be made...

[Application of traditional Chinese medicine reference standards in quality control of Chinese herbal pieces].

Science.gov (United States)

Lu, Tu-Lin; Li, Jin-Ci; Yu, Jiang-Yong; Cai, Bao-Chang; Mao, Chun-Qin; Yin, Fang-Zhou

2014-01-01

Traditional Chinese medicine (TCM) reference standards plays an important role in the quality control of Chinese herbal pieces. This paper overviewed the development of TCM reference standards. By analyzing the 2010 edition of Chinese pharmacopoeia, the application of TCM reference standards in the quality control of Chinese herbal pieces was summarized, and the problems exiting in the system were put forward. In the process of improving the quality control level of Chinese herbal pieces, various kinds of advanced methods and technology should be used to research the characteristic reference standards of Chinese herbal pieces, more and more reasonable reference standards should be introduced in the quality control system of Chinese herbal pieces. This article discussed the solutions in the aspect of TCM reference standards, and future development of quality control on Chinese herbal pieces is prospected.

National Water Quality Standards Database (NWQSD)

Data.gov (United States)

U.S. Environmental Protection Agency — The National Water Quality Standards Database (WQSDB) provides access to EPA and state water quality standards (WQS) information in text, tables, and maps. This data...

Standardized quality in MOOC based learning

Directory of Open Access Journals (Sweden)

Maiorescu Irina

2015-04-01

Full Text Available Quality in the field of e-learning and, particularly, in the field of MOOC( Massive Open Online Courses, is a topic of growing importance in both academic institutions and in the private sector as it has generally been proved that quality management can contribute to improving the performance of organizations, regardless of their object of activity. Despite the fact that there are standards relating to quality management in a general manner, professionals, academic staff, specialists and bodies felt the need for having a standardized approach of the quality in the sector of e-learning. Therefore, in the last years, in different countries quality guidelines have been developed and used for e-Learning or distance education (for example the ASTD criteria for e- Learning, the BLA Quality Mark, Quality Platform Learning by D-ELAN etc.. The current paper aims to give insights to this new form of online education provided by MOOC platforms using the specific quality standard approach.

Brief review of German standards for quality audits in automotive production

Directory of Open Access Journals (Sweden)

Yulia Šurinová

2013-04-01

Full Text Available Quality management systems (QMS in the automotive industry have several differences in comparison with other industrial factories. Each customer has his own specific requirements, the so-called CSRs (Customer Specific Requirements. Audits are one of the core-tools of quality management to make the PDCA cycle work. It is clear that compliance to ISO/TS 16949:2009 requirements is a condition for supplying the automotive industry. But there are some standards which co-exist together with the official ISO9001 Q-management systems standards and technical specification ISO/TS16949. What are those specific standards in the automotive industry and which standard should be used and why – those are the questions to be answered in this article.

Russian Higher Education and European Standards of Quality Assurance

Science.gov (United States)

Motova, Galina; Pykko, Ritta

2012-01-01

This article considers the relevance and implementation of European approaches to quality assurance in the context of the Russian educational system. It covers the issues of transformation of the higher education system during the post-Soviet period, specific features of the state accreditation system, the impact of the European Standards and…

Implementation of the OECD principles of good laboratory practice in test facilities complying with a quality system accredited to the ISO/IEC 17025 standard.

Science.gov (United States)

Feller, Etty

2008-01-01

Laboratories with a quality system accredited to the ISO/IEC 17025 standard have a definite advantage, compared to non-accredited laboratories, when preparing their facilities for the implementation of the principles of good laboratory practice (GLP) of the Organisation for Economic Co-operation and Development (OECD). Accredited laboratories have an established quality system covering the administrative and technical issues specified in the standard. The similarities and differences between the ISO/IEC 17025 standard and the OECD principles of GLP are compared and discussed.

The impact of laboratory quality assurance standards on laboratory operational performance

Directory of Open Access Journals (Sweden)

E Ratseou

2014-01-01

Full Text Available It has become a trend for companies to implement and be certified to various quality management systems so as to improve consistency, reliability, and quality of product delivery to customers. The most common quality management systems adopted are the ISO 9000 series of standards for manufacturing and services related organisations, with ISO 17025 and Good Laboratory Practices (GLP standards adopted specifically by laboratories as quality assurance initiatives. There are various reports on the impact of the ISO 9000 series on organisational performance but no studies or reports have been done on the performance of laboratory standards. Therefore this article reports on a study conducted to investigate the impact of ISO 17025 and GLP on the operational performance of both commercial and non-commercial laboratories. A qualitative research study was conducted to examine the impact standards on the aspects of health and safety, supplier selection and performance, human resources, customer satisfaction and profitability of the laboratory. The data collected suggest that there is no difference in laboratory operational performance with or without the standards. In other words it appears that the basic fundamental requirements inherent with laboratories are sufficient to perform both operationally and optimally. This leads to the view that standards are implemented as a customer requirement and not as an operational requirement.

Expert database system for quality control

Science.gov (United States)

Wang, Anne J.; Li, Zhi-Cheng

1993-09-01

There are more competitors today. Markets are not homogeneous they are fragmented into increasingly focused niches requiring greater flexibility in the product mix shorter manufacturing production runs and above allhigher quality. In this paper the author identified a real-time expert system as a way to improve plantwide quality management. The quality control expert database system (QCEDS) by integrating knowledge of experts in operations quality management and computer systems use all information relevant to quality managementfacts as well as rulesto determine if a product meets quality standards. Keywords: expert system quality control data base

[Study on emission standard system of air pollutants].

Science.gov (United States)

Jiang, Mei; Zhang, Guo-Ning; Zhang, Ming-Hui; Zou, Lan; Wei, Yu-Xia; Ren, Chun

2012-12-01

Scientific and reasonable emission standard system of air pollutants helps to systematically control air pollution, enhance the protection of the atmospheric environment effect and improve the overall atmospheric environment quality. Based on the study of development, situation and characteristics of national air pollutants emission standard system, the deficiencies of system were pointed out, which were not supportive, harmonious and perfect, and the improvement measures of emission standard system were suggested.

Study on the testing standards of quality assurance for CT image

International Nuclear Information System (INIS)

Liu Jingxin; Yang Haishan; Liu Gang; Wang Liyun

2000-01-01

Objective: To establish national testing standards of quality assurance for CT image. Methods: 104 sets of CT system were tested using quality assurance test phantoms and devices including American RMI 461A, RMI 463, MDH 1015 C with ION Chamber, Sweden UNF 9004 kvp meter. These CT were made from different manufacturers including out of date of CT and state-of-art spiral CT system. Thirteen kinds of standards on CT from different countries and 87 sets of technical specifications of CT were collected. The results of the test were compared using phantoms of RMI, Victoreen, Catphan on the same CT system (Siemens HQS). Results: Based on the test results of this study, with reference to the foreign standards and some of regulations in China, CT test items should include high contrast resolution, low contrast resolution, noise, uniformity, mean CT unit, dose slice thickness, localization light, positioning of patient support and gantry tilt. Standards including acceptance test, status test, and constancy test were made in specification. Among them, constancy test equals to IEC 122-2-6; items and results in acceptance test are stricter than in the status test; and low contrast resolution, uniformity, localization light accuracy and positioning of patient support in the acceptance test are even stricter than that in foreign standards. Conclusion: The testing standards of quality assurance for CT developed in this study shows practical and useful in China, which supplemented to the existing international standards

Development of a quality management system for Brazilian nuclear installations

International Nuclear Information System (INIS)

Kibrit, Eduardo; Zouain, Desiree Moraes

2005-01-01

The present work is a proposal for developing a quality management system for Brazilian nuclear installations, based on applicable standards. The standard ISO 9001:2000 [4] establishes general requirements for the implementation of a quality management system in all kinds of organizations. The standard IAEA 50-C/SG-Q [1] establishes general requirements for the implementation of a quality assurance system in nuclear installations. The standard CNEN-NN- 1.16 [5] establishes the regulating requirements for the quality assurance systems and programs of nuclear installations, for licensing and authorization for operation of these installations in Brazil. The revision of standard IAEA 50-C/SG-Q [1], to be replaced by IAEA DS 338 [2] and IAEA DPP 349 [3], introduces the concept of 'Integrated Management System' for the nuclear area, in preference to the concept of 'Quality Assurance'. This approach is incorporated with the current tendency, because it guides the system to manage, in an integrated way, the requirements of quality, safety, health, environment, security and economics of the installation. The results of the characterization of the quality management systems established in the applicable standards are presented, with the determination of the common and conflicting points among them. Referring data to quality assurance program/quality management system in some nuclear installations of IAEA Member States are also presented. (author)

Quality control of secondary standards and calibration systems, therapy level, of National Laboratory of Metrology from Ionizing Radiations (LNMRI)

International Nuclear Information System (INIS)

Cecatti, E.R.; Freitas, L.C. de

1992-01-01

The results of quality control program of secondary standards, therapy level, and the calibration system of clinical dosemeters were analysed from 1984, when a change in the laboratory installation occurred and new standards were obtained. The national and the international intercomparisons were emphasised. The results for graphite wall chambers were compared, observing a maximum variation of about 0,6%. In the case of Delrin (TK01) wall chambers, the maximum variation was 1,7%. The results of post intercomparisons with thermoluminescent dosemeters have presented derivations lesser than 1%, securing the standards consistence at LNMRI with the international metrological system. (C.G.C.)

Information System Quality Assessment Methods

OpenAIRE

Korn, Alexandra

2014-01-01

This thesis explores challenging topic of information system quality assessment and mainly process assessment. In this work the term Information System Quality is defined as well as different approaches in a quality definition for different domains of information systems are outlined. Main methods of process assessment are overviewed and their relationships are described. Process assessment methods are divided into two categories: ISO standards and best practices. The main objective of this w...

Establishment of a Quality Management System Based on ISO 9001 Standard in a Public Service Fungal Culture Collection

KAUST Repository

Simoes, Marta; Dias, Nicolina; Santos, Cledir; Lima, Nelson

2016-01-01

to facilitate that process is to implement a Quality Management System (QMS) based on the ISO 9001 standard. Here, we report a detailed description of all the steps taken for the QMS implementation at the Portuguese CC of filamentous fungi: Micoteca da

Why We Should Establish a National System of Standards.

Science.gov (United States)

Hennen, Thomas J., Jr.

2000-01-01

Explains the need to establish a national system of standards for public libraries. Discusses local standards, state standards, and international standards, and suggests adopting a tiered approach including three levels: minimum standards; target standards; and benchmarking standards, as found in total quality management. (LRW)

Quality label 'Geothermal energy source' (quality-assurance system)

International Nuclear Information System (INIS)

Eugster, W. J.

2005-01-01

The design of borehole heat exchanger (BHE) plants is covered only marginally through the existing quality labels. And only for small and simple systems. Especially the middle and large sized BHE plants are excluded from the labels. And exactly those plants may be very difficult to treat and to handle. Two concepts of quality control are proposed. On one hand a quality label, which is based on an object sheet, that is both, a planning help and a quality proof. There is no duty for the heating/ventilation/air-conditioning (HVAC) engineers to acquire such a quality label. The label is based on a self quality declaration of the engineers. Therefore a controlling system is needed which induces costs to the labelled engineers. A market penetration of around 20% is predicted for the first three years. The second concept is based on a clear definition of the actual state of the art in designing a BHE plant in a formal standard by the Swiss Engineers and Architects Society (SIA). This concept is proposed for realisation. Nearly 90% of the Swiss BHE drilling market is penetrated by the labelled drilling companies which have agreed to demand from their HVAC engineers (planners) to apply the future SIA standard, either by their general drilling and delivery conditions or by a special agreement. This fact guarantees a fast spreading and application of such a new SIA standard. A collateral information offensive for the HVAC engineers working in the design of BHE plants needs to be stated in any way. This method is not only very cheap but also guarantees a fast and a broad market penetration which must have nearly the same grade as the quality label for drilling companies. But of course, the new standard has to be elaborated first, what should be possible within approximately one year. (author)

Implementation of ISO 9000 Quality Standard into Adult Education

Directory of Open Access Journals (Sweden)

Andrej Sotošek

2000-12-01

Full Text Available Competition in the field of adult education in Slovenia has become very tough  in the second half of the 1990s. Therefore, educational institutions are forced to use every advantage over the competitors in the educational market. One of them is the quality system in educational process. Such competitive position setting strategic development objectives is also the strategy of UPI - Ljudska univerza Žalec. Through development objectives, relationships with our partners and customers, as well as on the basis of analysis of the position and connections of Slovenia within the European Union and its involvement in international projects we estimated that we should set up a quality system in our institution involving managerial, organisational and professional function. It is important that the system should be comparable and verifiable according to the European standards. We have chosen the Quality System according to ISO 9000 quality standards as the most suitable model. It offers an institutional framework as well as a good basis for an internal and external verification of the efficiency of the system in real life. It also enables corrections to deviations. However, it lacks a stronger stress on internal self-control and self-evaluation, which is emphasised in the model of quality assurance in education developed by a group of experts to order of Ministry of Education and Sport. Both model s can be combined and are mutually compatible. I am convinced of the great importance of self-evaluation in education. Yet, without an appropriate institutional framework and basic external verification the self-evaluation remains on the interna! and subjective level of judgement within an individual educational institution.

Correlation pattern recognition: optimal parameters for quality standards control of chocolate marshmallow candy

Science.gov (United States)

Flores, Jorge L.; García-Torales, G.; Ponce Ávila, Cristina

2006-08-01

This paper describes an in situ image recognition system designed to inspect the quality standards of the chocolate pops during their production. The essence of the recognition system is the localization of the events (i.e., defects) in the input images that affect the quality standards of pops. To this end, processing modules, based on correlation filter, and segmentation of images are employed with the objective of measuring the quality standards. Therefore, we designed the correlation filter and defined a set of features from the correlation plane. The desired values for these parameters are obtained by exploiting information about objects to be rejected in order to find the optimal discrimination capability of the system. Regarding this set of features, the pop can be correctly classified. The efficacy of the system has been tested thoroughly under laboratory conditions using at least 50 images, containing 3 different types of possible defects.

Quality-of-data broker for quality-of-data-aware telemedicine systems

NARCIS (Netherlands)

Larburu Rubio, Nekane; Bults, Richard G.A.; van Sinderen, Marten J.; Widya, I.A.; Hermens, Hermanus J.

2016-01-01

Purpose: Telemedicine systems must provide clinical data of sufficient quality (according to medical standards) to support safe treatment guidance of outpatients. Quality of clinical data (QoD) typically varies due to unstable performance of ICT-components of these telemedicine systems. Therefore,

The quality management system applied at PRPN

International Nuclear Information System (INIS)

Benar Bukit

2007-01-01

The ISO 9001-2000 is an International standard for quality management systems. The application of this quality management system is for guaranteeing that the organizations products will fulfill requirements set by its customers. Here the steps taken to apply the quality management system at PRPN are expounded in five main parts, namely quality management system, responsibilities of the management, resources, product realization, measurement, analysis and repair. (author)

Safety standards of IAEA for management systems

International Nuclear Information System (INIS)

Vincze, P.

2005-01-01

IAEA has developed a new series of safety standards which are assigned for constitution of the conditions and which give the instruction for setting up the management systems that integrate the aims of safety, health, life environment and quality. The new standard shall replace IAEA 50-C-Q - Requirements for security of the quality for safety in nuclear power plants and other nuclear facilities as well as 14 related safety instructions mentioned in the Safety series No. 50-C/SG-Q (1996). When developing of this complex, integrated set of requirements for management systems, the IAEA requirements 50-C-Q (1996) were taken into consideration as well as the publications developed within the International organisation for standardization (ISO) ISO 9001:2000 and ISO14001: 1996. The experience of European Union member states during the development, implementation and improvement of the management systems were also taken into consideration

The International Standards for Solar Thermal Collectors and Components as a Medium of Quality Assurance

International Nuclear Information System (INIS)

Alkishriwi, Nouri; Schorn, Christian A.; Theis, Danjana

2014-01-01

Within this publication a detailed overview about the national and international solal't1lel1nai standards is made. The various tests are described and a cross reference list for comparing the different standards is given. Moreover a certification model is presented and the advantage of third party assessment is carried out. The requirement for a solar thermal test laboratory to conduct independent third party assessment by means of an ISO/IEC17065 accreditation is given. Finally the concept of a quality system for solar thermal markets is explained and major advantages are outlined. Solar thermal systems and their components are described in various national and international standards. In Europe the standard EN12975 defines the regulations and requirements for solar thermal collectors. The standard EN12976 is established for the evaluation of factory made solar thermal systems. The EN12977 is the state of the art standard for the evaluation of custom build systems. Nowadays in Libya the standard ISO9806 for solar collectors and the standard ISO9459 for domestic water heating systems define the regulations and requirements for solar thermal collectors and systems. In the meanwhile, empowered Center for Renewable Energy and Energy Efficiency Certification Body is under construction. This body is working now to set the minimum requirements of the testing facilities of solar thermal systems. The international standard for collector testing is the ISO9806 and the standard ISO9459 Part 2, 4, 5 for domestic water heating systems. Within the year 2013 a revision of the ISO9806 will be published and, for the first time, a consistent harmonized standard for the main solar thermal markets will be set in force. Besides the various standards for solar thermal products a meaningful element for the quality assurance and the customer protection is third party certification. Third party certification involves an independent assessment, declaring that specified requirements

78 FR 54517 - Water Quality Standards Regulatory Clarifications

Science.gov (United States)

2013-09-04

... 131 Water Quality Standards Regulatory Clarifications; Proposed Rule #0;#0;Federal Register / Vol. 78... AGENCY 40 CFR Part 131 [EPA-HQ-OW-2010-0606; FRL-9839-7] RIN 2040-AF 16 Water Quality Standards... Environmental Protection Agency (EPA) is proposing changes to the federal water quality standards (WQS...

Standard practice for determining relative image quality response of industrial radiographic imaging systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This standard provides a practice whereby industrial radiographic imaging systems may be comparatively assessed using the concept of relative image quality response (RIQR). The RIQR method presented within this practice is based upon the use of equivalent penetrameter sensitivity (EPS) described within Practice E 1025 and subsection 5.2 of this practice. Figure 1 illustrates a relative image quality indicator (RIQI) that has four different steel plaque thicknesses (.015, .010, .008, and .005 in.) sequentially positioned (from top to bottom) on a ¾-in. thick steel plate. The four plaques contain a total of 14 different arrays of penetrameter-type hole sizes designed to render varied conditions of threshold visibility ranging from 1.92 % EPS (at the top) to .94 % EPS (at the bottom) when exposed to nominal 200 keV X-ray radiation. Each “EPS” array consists of 30 identical holes; thus, providing the user with a quantity of threshold sensitivity levels suitable for relative image qualitative response com...

The Measurement of Quality of Semantic Standards : the Application of a Quality Model on the SETU standard for eGovernment

NARCIS (Netherlands)

Folmer, Erwin; van Bekkum, Michael; Oude Luttighuis, Paul; van Hillegersberg, Jos

2011-01-01

eGovernment interoperability should be dealt with using high-quality standards. A quality model for standards is presented based on knowledge from the software engineering domain. In the tradition of action research the model is used on the SETU standard, a standard that is mandatory in the public

Quality Systems Implementation in the Pharmaceutical Industry

African Journals Online (AJOL)

Nafiisah

quality standards imposed on local pharmaceutical manufacturers. Keywords: Quality/ .... GMP is concerned with both production and quality control. It is aimed ... in the European pharmaceutical industry in designing their quality systems:.

40 CFR 35.2111 - Revised water quality standards.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Revised water quality standards. 35... stream segments which have not, at least once since December 29, 1981, had their water quality standards...) The State has in good faith submitted such water quality standards and the Regional Administrator has...

Hungary Higher Education Quality Assurance System

Directory of Open Access Journals (Sweden)

Che Ru-shan

2013-07-01

Full Text Available Higher education quality assurance system has drawn much attention since 1980s. Most countries are committed to build the higher education quality assurance system to meet international standards. Under such an international trend, Hungary also actively promotes higher education reform, and established Hungarian Accreditation Committee and in order to ensure the quality of higher education.

Sustainable quality systems for every Health Service

International Nuclear Information System (INIS)

Touzet, Rodolfo; Pittaluga, Roberto R.

2008-01-01

The implementation of a Quality system is an indispensable requirement to assure the protection and the radiological safety, especially in those facilities where the potential risks are important. One of the 'general conclusions' of the Conference of Malaga (to achieve the RPP) is also the implementation of quality systems. Lamentably the great majority of the Services of Health in the world, more than 95 %, has not nowadays any formal quality system but only any elements what can be named a 'natural quality system' that includes protocols of work, records of several processes, certified of training of the personnel and diverse practices that are realized in systematic form but that not always are documented. Most health services do not have the necessary means available to adhere quickly to international standards. At the same time the health services do not have either qualified or trained personnel to lead a certification or accreditation project and most of them do not have the resources available to hire external consultants, especially the public hospitals. The scenario described represents a challenge for the Regulatory Authorities who must determine 'how to ensure that installations comply with an acceptable standard of quality without it placing an impossible strain on their budget?' Due to these circumstances a 'Basic Guide' has developed for the implementation of a quality system in every Health Service that takes the elements as a foundation of the standard ISO - 9000:2000 and the standard for systems management GSR-3 of the IAEA. The criteria and the methodologies are showed in the presentation. (author)

Quality standards: Comparison between IAEA 50-C/SG-Q and ISO 9001:2000

International Nuclear Information System (INIS)

2002-01-01

The International Atomic Energy Agency (IAEA) has the statutory mandate to seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world. As part of the activities to achieve its objectives, the IAEA is authorized to establish standards of safety for the protection of health and the minimization of danger to life and property. The standards of safety developed by the IAEA are recommendations for use by its Member States in the framework of national regulations for the safe utilization of nuclear energy. Such standards should be considered as nuclear safety regulatory documents. The standards developed by the International Organization for Standardization (ISO) are complementary technical documents emphasizing industrial application and contractual aspects. Regarding the quality assurance topic, the IAEA developed the publication Safety Series No. 50-C/SG-Q, Quality Assurance for Safety in Nuclear Power Plants and other Nuclear Installations, which is mostly used directly or indirectly to establish the nuclear safety requirements at the nuclear utility-regulator interface. The ISO 9001:2000 standard, Quality Management Systems Requirements, is often used to define the quality management system requirements at the utility-supplier interface. The relationship between the IAEA and ISO quality standards is growing in significance owing to their increasing impact upon utilities (owners/operators of nuclear facilities) and their contractors/suppliers. The relationship between the IAEA and ISO standards is considered critical in particular with respect to contractors/suppliers with a small range of nuclear supplies. These contractors-suppliers are not always willing to prepare special quality assurance programmes based on nuclear safety standards. On the other hand, these contractors/suppliers may be qualified on the basis of the ISO quality standard. In any case, for delivering nuclear items and services the

Air Quality of Beijing and Impacts of the New Ambient Air Quality Standard

Directory of Open Access Journals (Sweden)

Wei Chen

2015-08-01

Full Text Available Beijing has been publishing daily reports on its air quality since 2000, and while the air pollution index (API shows that the air quality has improved greatly since 2000, this is not the perception of Beijing’s residents. The new national ambient air quality standard (NAAQS-2012, which includes the monitoring of PM2.5, has posed stricter standards for evaluating air quality. With the new national standard, the air quality in Beijing is calculated using both NAAQS-2012 and the previous standard. The annual attainment rate has dropped from 75.5% to 50.7%. The spatial analysis of air quality shows that only a background station could attain the national standard, while urban and suburban stations exceed the national standard. Among the six pollutants included in the NAAQS-2012, PM2.5 is the major contributor to the air quality index (AQI comparing with the five other pollutants. The results indicate that under previous NAAQS without PM2.5 monitoring, the air quality has improved greatly in the past decade.  By considering PM2.5, the air quality attainment has dropped greatly. Furthermore, a great effort is needed for local government to bring down the PM2.5 concentration.

[Quality system Vision 2000].

Science.gov (United States)

Pasini, Evasio; Pitocchi, Oreste; de Luca, Italo; Ferrari, Roberto

2002-12-01

A recent document of the Italian Ministry of Health points out that all structures which provide services to the National Health System should implement a Quality System according to the ISO 9000 standards. Vision 2000 is the new version of the ISO standard. Vision 2000 is less bureaucratic than the old version. The specific requests of the Vision 2000 are: a) to identify, to monitor and to analyze the processes of the structure, b) to measure the results of the processes so as to ensure that they are effective, d) to implement actions necessary to achieve the planned results and the continual improvement of these processes, e) to identify customer requests and to measure customer satisfaction. Specific attention should be also dedicated to the competence and training of the personnel involved in the processes. The principles of the Vision 2000 agree with the principles of total quality management. The present article illustrates the Vision 2000 standard and provides practical examples of the implementation of this standard in cardiological departments.

Round table discussion: Quality control and standardization of nuclear medicine software

International Nuclear Information System (INIS)

Anon.

1988-01-01

In summary the round table came to the following important conclusions: Nuclear medicine software systems need better documentation, especially regarding details of algorithms and limitations, and user friendliness could be considerably improved. Quality control of software is an integral part of quality assurance in nuclear medicine and should be performed at all levels of the software. Quality control of applications software should preferably be performed with assistance of generally accepted software phantoms. A basic form of standardization was welcomed and partly regarded as essential by all participants. Some areas such as patient study files could be standardized in the near future, whereas other areas such as the standardization of clinical applications programs or acquisition protocols still present major difficulties. An international cooperation in the field of standardization of software and other topics has already been started on the European level and should be continued and supported. (orig.)

Stability of Working Reference Standards for Hybrid K-Edge Densitometer Quality Assurance

International Nuclear Information System (INIS)

Guzzardo, T.; Pickett, C.A.; McElroy, R.; Croft, S.; Garrison, J.; Venkataraman, R.

2015-01-01

The relatively short working life of aqueous solution standards of actinides for the calibration and quality control of Hybrid K-Edge Densitometer (HKED) measurements necessitates the development of a stable matrix material less susceptible to degradation. Degradation in the form of evaporation, radiolysis, settling, sloshing, and sediment formation can all reduce the reliability and working life of an aqueous standard. These factors make aqueous solutions inadequate for long-term quality assurance measurements designed to detect weak or subtle trends in system performance. Epoxy, studied here, is an alternative matrix material that may be less vulnerable to degradation. An additional benefit of epoxy is that standards can easily be characterized as sealed sources which allows for simplified administrative controls during shipping and storage. The stability of working reference standards consisting of U 3 O 8 in an epoxy matrix for use in the HKED has been tracked for over three years through repeated X-ray Fluorescence (XRF) and K-Edge (KED) measurements. A set of six epoxy standards ranging in concentration from 1 g/l to 76 g/l uranium were determined to be stable, within the expected accuracy of the system, over the period of analysis. During this time, no effort was made to enhance the stability of the epoxy standards; the radial measurement position was not controlled and in the middle of the analysis period the HKED system and standards were shipped from the vendor's factory to the customer. Epoxy standards afford numerous benefits over those created from aqueous solutions and should be considered when developing HKED standards for quality assurance measurements. The stability of the epoxy allows the development of working standards of a stability and robustness sufficient for use in a proposed international round-robin exercise based on the exchange of such standards. (author)

Green Roofs: Standardization and Quality Control of Processes in Green Construction

Directory of Open Access Journals (Sweden)

Korol Elena

2017-01-01

Full Text Available The article considers the problems of standardization and quality control of processes in the construction, improvement of integrated safety of buildings and the implementation of innovative green building technologies, the use of national standards as well as international rating systems for green buildings evaluation. This is one of the priority directions in development of the modern construction. The aim of this study is the analysis of the green roof systems and international standards, which were carried out in the green building industry. The authors have studied traditional and innovative solutions of rational using natural resources and energy, the green roof system with integration of supported solar and wind energy collecting and converting devices and of irrigation system. Some studies provide evidence for the benefits of the modular green roof system in urban green space with microclimate differences. This article presents a new research which advances our knowledge of the economic and environmental services provided by the green roof system. Research reported here also considers the analysis of the Russian and international legislation of the quality control of processes in green construction.

State Air Quality Standards.

Science.gov (United States)

Pollution Engineering, 1978

1978-01-01

This article presents in tabular form the air quality standards for sulfur dioxide, carbon monoxide, nitrogen dioxide, photochemicals, non-methane hydrocarbons and particulates for each of the 50 states and the District of Columbia. (CS)

standards used for quality control of nuclear fuels

International Nuclear Information System (INIS)

Guereli, L; Can, S.

1997-01-01

Nuclear fuels and fuel materials are subject to stringent restrictions as to their quality. The standards and regulations that apply vary according to reactor type and country and the standards are stated in the quality assurance documents. The concept of quality assurance has altered the conventional quality control tests and procedures, defining which control tests are to be applied and how. Although most of the tests and measurements allow the determination of tolerances to be decided according to the agreement between the buyer and the seller, exacting procedures apply to which instruments and equipment are used for these tests and measurements, how these instruments are standardized.Detailed explanations of test methods and their documentation is a requirement in all standards. The purpose of this work is to study which standards, tests and measurements apply to the nuclear fuel production. Only the standards that apply to various stages of the nuclear fuel production (powder preparation, pellet production, fuel element and fuel assembly fabrication) are reviewed. Process and documentation control, design and licensing requirements and the frequency of inspections are quality assurance subjects. Some ASTM standards are given as examples

Clinical audit and quality systems - practical implementation in Finland

International Nuclear Information System (INIS)

Jaervinen, H.

2003-01-01

Clinical audit is a new concept of significant importance for the quality of radiological practices, introduced by the EC Medical Exposure Directive (MED, 97/43/EURATOM). By definition, clinical audit means 'a systematic examination or review of medical radiological procedures which seeks to improve the quality and the outcome of patient care, through structured review whereby radiological practices, procedures, and results are examined against agreed standards for good medical radiological procedures, with modifications of the practices where indicated and the application of new standards if necessary'. In its most profound meaning, being introduced in the medical exposure directive, clinical audit can be seen as a review of the success in implementing the justification and optimization principles, and therefore, it is to a large extent an issue of radiation safety for the patient. According to the directive, clinical audits shall be 'carried out in accordance with national procedures'. For the last few years, parallel to the development of the MED in Europe, there has been a worldwide tendency to implement appropriate quality systems (QS) in the health care organizations, in accordance with the international quality standards (ISO 9000 series etc). Such quality systems have been applied for a long time and very widely by the industry. It is a strong belief that the development of quality systems for health care would result in equal benefits as trusted in industry, in terms of efficiency and safety of health care services. For radiological practices, the quality systems are expected to become a framework for improving the optimization of practices and for maintaining good radiation safety, as well as providing a mechanism to prevent mistakes and accidents. In some countries, like the UK and The Netherlands, there are legal requirements to establish and maintain quality systems at certain type of radiological units. In some countries and some radiological units

ARCHITECTURE SOFTWARE SOLUTION TO SUPPORT AND DOCUMENT MANAGEMENT QUALITY SYSTEM

Directory of Open Access Journals (Sweden)

Milan Eric

2010-12-01

Full Text Available One of the basis of a series of standards JUS ISO 9000 is quality system documentation. An architecture of the quality system documentation depends on the complexity of business system. An establishment of an efficient management documentation of system of quality is of a great importance for the business system, as well as in the phase of introducing the quality system and in further stages of its improvement. The study describes the architecture and capability of software solutions to support and manage the quality system documentation in accordance with the requirements of standards ISO 9001:2001, ISO 14001:2005 HACCP etc.

Air Pollution Monitoring | Air Quality Planning & Standards ...

Science.gov (United States)

2016-06-08

The basic mission of the Office of Air Quality Planning and Standards is to preserve and improve the quality of our nation's air. To accomplish this, OAQPS must be able to evaluate the status of the atmosphere as compared to clean air standards and historical information.

Do semantic standards lack quality? A survey among 34 semantic standards

NARCIS (Netherlands)

Folmer, E.J.A.; Oude Luttighuis, P.H.W.M.; Hillegersberg, J. van

2011-01-01

The adoption of standards to improve interoperability in the automotive, aerospace, shipbuilding and other sectors could save billions. While interoperability standards have been created for a number of industries, problems persist, suggesting a lack of quality of the standards themselves. The issue

Do semantic standards lack quality? A survey among 34 semantic standards.

NARCIS (Netherlands)

Folmer, Erwin Johan Albert; Oude Luttighuis, Paul; van Hillegersberg, Jos

2011-01-01

The adoption of standards to improve interoperability in the automotive, aerospace, shipbuilding and other sectors could save billions. While interoperability standards have been created for a number of industries, problems persist, suggesting a lack of quality of the standards themselves. The issue

Optimum power quality service in multi-bus microgrid systems

DEFF Research Database (Denmark)

Meng, Lexuan; Guerrero, Josep M.

2017-01-01

Power quality requirements for different consumers and electric equipment are distinguished. Conventionally a common power quality standard is applied to the whole power grid inducing debate between several sides, including consumers, generation sites and technical commissions. Customized power...... quality standard settings for different consumers become a widely accepted solution. The main challenge is on the proper regulation of power quality in different areas. This paper considers a multi-bus microgrid system where the power quality in each has flexible and individual standard. Distributed...... generators are utilized to provide power quality regulation functions. An optimization method based strategy is proposed and implemented with the power converter control system. A general mathematical model is established which can be used in the optimization problem for evaluating the objective function...

A novel colonoscopy reporting system enabling quality assurance

NARCIS (Netherlands)

van Doorn, Sascha C.; van Vliet, Joost; Fockens, Paul; Dekker, Evelien

2014-01-01

The quality of colonoscopy can only be measured if colonoscopy reports include all key quality indicators. In daily practice, reporting is often incomplete and not standardized. This study describes a novel, structured colonoscopy reporting system, which aims to generate standardized and complete

Higher Education Quality Assessment Model: Towards Achieving Educational Quality Standard

Science.gov (United States)

Noaman, Amin Y.; Ragab, Abdul Hamid M.; Madbouly, Ayman I.; Khedra, Ahmed M.; Fayoumi, Ayman G.

2017-01-01

This paper presents a developed higher education quality assessment model (HEQAM) that can be applied for enhancement of university services. This is because there is no universal unified quality standard model that can be used to assess the quality criteria of higher education institutes. The analytical hierarchy process is used to identify the…

A Global Assessment on Climate Research Engaging Indigenous Knowledge Systems and Recommendations for Quality Standards of Research Practice in Indigenous Communities

Science.gov (United States)

Davíd-Chavez, D. M.; Gavin, M. C.

2017-12-01

Indigenous communities worldwide have maintained their own knowledge systems for millennia informed through careful observation of dynamics of environmental changes. Withstanding centuries of challenges to their rights to maintain and practice these knowledge systems, Indigenous peoples continually speak to a need for quality standards for research in their communities. Although, international and Indigenous peoples' working groups emphasize Indigenous knowledge systems and the communities who hold them as critical resources for understanding and adapting to climate change, there has yet to be a comprehensive, evidence based analysis into how diverse knowledge systems are integrated in scientific studies. Do current research practices challenge or support Indigenous communities in their efforts to maintain and appropriately apply their knowledge systems? This study addresses this question using a systematic literature review and meta-analysis assessing levels of Indigenous community participation and decision-making in all stages of the research process (initiation, design, implementation, analysis, dissemination). Assessment is based on reported quality indicators such as: outputs that serve the community, ethical guidelines in practice (free, prior, and informed consent and intellectual property rights), and community access to findings. These indicators serve to identify patterns between levels of community participation and quality standards in practice. Meta-analysis indicates most climate studies practice an extractive model in which Indigenous knowledge systems are co-opted with minimal participation or decision-making authority from communities who hold them. Few studies report outputs that directly serve Indigenous communities, ethical guidelines in practice, or community access to findings. Studies reporting the most quality indicators were initiated in mutual agreement between Indigenous communities and outside researchers or by communities themselves

Establishment of a Quality Management System Based on ISO 9001 Standard in a Public Service Fungal Culture Collection

Science.gov (United States)

Simões, Marta F.; Dias, Nicolina; Santos, Cledir; Lima, Nelson

2016-01-01

Collaborations between different Microbiological Resource Centres (mBRCs) and ethical sourcing practices are mandatory to guarantee biodiversity conservation, successful and sustainable preservation and fair share of benefits that arise from the use of genetic resources. Since microbial Culture Collections (CCs) are now engaged in meeting high quality operational standards, they are facing the challenge of establishing quality control criteria to certify their biological materials. The authentication/certification of strains is nowadays a demand from the bioeconomy sector for the global operation of mBRCs. The achievement of consistent quality assurance and trust within the mBRCs and microbial CCs context is a dynamic and never-ending process. A good option to facilitate that process is to implement a Quality Management System (QMS) based on the ISO 9001 standard. Here, we report a detailed description of all the steps taken for the QMS implementation at the Portuguese CC of filamentous fungi: Micoteca da Universidade do Minho (MUM). Our aim is to provide guidelines for the certification of other CCs, so that they can also enhance the search and choice of the most consistent, reliable, and effective operating methods, with assured procedures and validation of preservation; and guarantee trustworthy relations with all stakeholders. PMID:27681915

Establishment of a Quality Management System Based on ISO 9001 Standard in a Public Service Fungal Culture Collection

KAUST Repository

Simoes, Marta

2016-06-22

Collaborations between different Microbiological Resource Centres (mBRCs) and ethical sourcing practices are mandatory to guarantee biodiversity conservation, successful and sustainable preservation and fair share of benefits that arise from the use of genetic resources. Since microbial Culture Collections (CCs) are now engaged in meeting high quality operational standards, they are facing the challenge of establishing quality control criteria to certify their biological materials. The authentication/certification of strains is nowadays a demand from the bioeconomy sector for the global operation of mBRCs. The achievement of consistent quality assurance and trust within the mBRCs and microbial CCs context is a dynamic and never-ending process. A good option to facilitate that process is to implement a Quality Management System (QMS) based on the ISO 9001 standard. Here, we report a detailed description of all the steps taken for the QMS implementation at the Portuguese CC of filamentous fungi: Micoteca da Universidade do Minho (MUM). Our aim is to provide guidelines for the certification of other CCs, so that they can also enhance the search and choice of the most consistent, reliable, and effective operating methods, with assured procedures and validation of preservation; and guarantee trustworthy relations with all stakeholders.

Establishment of a Quality Management System Based on ISO 9001 Standard in a Public Service Fungal Culture Collection.

Science.gov (United States)

Simões, Marta F; Dias, Nicolina; Santos, Cledir; Lima, Nelson

2016-06-22

Collaborations between different Microbiological Resource Centres (mBRCs) and ethical sourcing practices are mandatory to guarantee biodiversity conservation, successful and sustainable preservation and fair share of benefits that arise from the use of genetic resources. Since microbial Culture Collections (CCs) are now engaged in meeting high quality operational standards, they are facing the challenge of establishing quality control criteria to certify their biological materials. The authentication/certification of strains is nowadays a demand from the bioeconomy sector for the global operation of mBRCs. The achievement of consistent quality assurance and trust within the mBRCs and microbial CCs context is a dynamic and never-ending process. A good option to facilitate that process is to implement a Quality Management System (QMS) based on the ISO 9001 standard. Here, we report a detailed description of all the steps taken for the QMS implementation at the Portuguese CC of filamentous fungi: Micoteca da Universidade do Minho (MUM). Our aim is to provide guidelines for the certification of other CCs, so that they can also enhance the search and choice of the most consistent, reliable, and effective operating methods, with assured procedures and validation of preservation; and guarantee trustworthy relations with all stakeholders.

Ideology and Audit Culture: Standardized Service Quality Surveys in Academic Libraries

Science.gov (United States)

Lilburn, Jeff

2017-01-01

This article examines the relationship between the standardized service quality survey LibQUAL+ and the rise of audit culture. Recent scholarship examining assessment and accountability systems and the ideological principles driving their implementation in higher education raises concerns about the impact these systems have on teaching, learning,…

BRC/IoP standard importance in packaging quality assurance

Directory of Open Access Journals (Sweden)

Agnieszka Kawecka

2014-10-01

Full Text Available BRC/IoP (British Retail Consortium / Institute of Packaging is the only industry standard dedicated entrepreneurs operating in the packaging industry, primarily intended for contact with food. The requirements of the BRC / IoP guarantee the safety of packaging and fulfillment of all legal and hygienic requirements. The article presents the main features of the standard, the basic requirements contained in the document and the results of research on the implementation of quality management systems, including standard BRC / IoP and the actions that are required checklists. It is noticeable that there is little interest in certification BRC / IoP, due to low awareness of the standard, despite the fulfillment of some of the basic requirements of the surveyed companies.

Quality control of the NPL-CRC secondary standard system used for activimeters calibration at IPEN, Sao Paulo, Brazil

International Nuclear Information System (INIS)

Martins, Elaine W.; Potiens, Maria da P.A.

2009-01-01

The objective of this study was to establish a quality control program to be applied at the NPL-CRC activimeter secondary standard system, used as reference to comparison in tests made with the work tertiary standard activimeter, Capintec basic CRC R -15BT, both belonging to the Calibration Laboratory of IPEN. The repeatability, reproducibility and the precision tests were performed using a sealed check source of 133 Ba, from Amersham. It was made 70 series of 10 measurements to each activimeter, totaling 1400 measurements. Considering the variation limit of 5% to precision and reproducibility tests in the nuclear medicine services, recommended by the Brazilian standard CNEN-NN-3.05, the results observed in the behavior of the IPEN activimeter were satisfactory. (author)

Quality Assurance Standards for Symptomatic Breast Disease Services

OpenAIRE

Department of Health (Ireland)

2007-01-01

Quality Assurance Standards for Symptomatic Breast Disease Services People in Ireland have a right to expect that medical care be of good quality. They expect that standards of care are consistently high. They expect that access to care is easy, speedy, effective and efficient. Society expects quality of care to measure up to international norms of good practice. Such assurance can be given by auditing the quality of activity. Click here to download PDF 606kb

40 CFR 131.22 - EPA promulgation of water quality standards.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false EPA promulgation of water quality... PROGRAMS WATER QUALITY STANDARDS Procedures for Review and Revision of Water Quality Standards § 131.22 EPA promulgation of water quality standards. (a) If the State does not adopt the changes specified by the Regional...

77 FR 30087 - Air Quality Designations for the 2008 Ozone National Ambient Air Quality Standards

Science.gov (United States)

2012-05-21

... and 81 Air Quality Designations for the 2008 Ozone National Ambient Air Quality Standards; Implementation of the 2008 National Ambient Air Quality Standards for Ozone: Nonattainment Area Classifications...-9668-2] RIN 2060-AP37 Air Quality Designations for the 2008 Ozone National Ambient Air Quality...

Measurement system as a subsystem of the quality management system

Directory of Open Access Journals (Sweden)

Ľubica Floreková

2006-12-01

Full Text Available Each measurement system and a control principle must be based on certain facts about the system behaviour (what, operation (how and structure (why. Each system is distributed into subsystems that provide an input for the next subsystem. For each system, start is important the begin, that means system characteristics, collecting of data, its hierarchy and the processes distribution.A measurement system (based on the chapter 8 of the standard ISO 9001:2000 Quality management system, requirements defines the measurement, analysis and improvement for each organization in order to present the products conformity, the quality management system conformity guarantee and for the continuously permanent improvement of effectivity, efficiency and economy of quality management system.

quality assurance systems in nuclear fuel procurement and manufacturing

International Nuclear Information System (INIS)

Can, S.

1997-01-01

Quality is the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs. Quality control is activities and techniques used to fulfill the requirements of quality. Quality assurance is a system and its main components are requirements. QA program, organization and responsibilities, design and verification, material and its control, manufacturing and process control, inspections, audits and documents: manuals, specifications, instructions. Quality assurance systems are largely based on ISO 9000 series of the International Standards Organization. ISO 9000 series has been adopted and published by Turkish Standards Institute as TS-ISO 9000. International Atomic Energy Agency also published a guide (50-SG-QA11) ''Quality Assurance in the Procurement, Design and Manufacture of Nuclear Fuel Assemblies'' in the safety guide series. In this study the role of quality control in quality assurance systems, inspection and test plans and acceptance and nonconformance quality levels will be explained in relation to nuclear fuel production. Examples of applications in quality assurance systems based on ISO 9000 will be given

From 'Compliance-based' to 'Performance-based' Quality - A trend in and evolution of U. S. quality standards

International Nuclear Information System (INIS)

Brown, Douglas A.; Taylor, H. Stephen; Johnson, Robert B.; Erler, Bryan A.; Daley, Thomas J.

1995-01-01

This paper traces the evolution of quality systems for nuclear power plant design, procurement, fabrication, installation, pre-operational testing, operations and maintenance in the U. S., as reflected in consensus standards such as N45.2, NQA-1, etc. Using a 'Defense-In-Depth' Quality Model, it highlights the changes in understanding where the responsibilities for quality should reside. Industries' growing recognition and operating experience show that a 'graded' approach to quality, based on safety significance, can be used to determine which quality criteria apply and the depth of implementing those criteria, resulting in potential long term cost savings and increased effectiveness) is also examined and discussed. Together, these two approaches form the basis for a performance-based quality system suitable for the business and technical environment of the 1990's and beyond. Performance-based Quality System - an approach that focuses on the end results, not the process, that directly contribute to safe and reliable plant operations. This approach includes monitoring performance or condition against predetermined, licensee-established goals, limits, or criteria in a manner sufficient to provide reasonable assurance that the safety function will be fulfilled. These criteria are based upon the design basis safety function, operating experience, and pertinent reliability studies. A licensee is allowed the flexibility to determine how best to achieve the results and adjust the application of quality elements accordingly. The roles of the individual worker, site/line supervision and management, independent quality verifiers (QA and QC), and external regulators are examined in the context of where and how industry quality standards have historically placed emphasis and accountability. The changes in these standards and their of effects are illustrated. Based on industry experience, the current understanding of the controls necessary to achieve safe, reliable and

76 FR 38592 - Phosphorus Water Quality Standards for Florida Everglades

Science.gov (United States)

2011-07-01

..., Standards and Health Protection Division, Office of Science and Technology, Mail Code: 4305T, Environmental... Elimination System (NPDES) permit limits. With this in mind, categories and entities that may ultimately be... of the water and water quality criteria necessary to protect those uses. States must submit any new...

Integrated management system - management standards evolution and the IAEA new approach

International Nuclear Information System (INIS)

Oliveira, Dirceu Paulo de; Zouain, Desiree Moraes

2007-01-01

The management standards application began in military and nuclear areas towards the end of Second World War, when some westerns countries developed quality standards to improve their means to assess suppliers' conditions to assure their products conformance, which was increasingly complex and required a higher degree of reliability. Afterwards, the quality standards application was extended to the consumer market focused on consumers' requirements satisfaction. Coming along the society crescent concern about quality of life, other management standards were developed, such as those dealing with environmental and sustainable development, occupational health and safety, social accountability and so on. As a consequence, the management process became complex. The management system integrated form approach makes possible the compatibility of distinct and complementary interests from several functions and disciplines involved and supply the absence of the organizations' holistic approach. According to this integrated management approach, the Agency - 'International Atomic Energy Agency' (IAEA) - decided to review the structure of the 50-C-Q standard - 'Quality Assurance for Safety in Nuclear Power Plants and Other Nuclear Installations', from 1996, publishing in 2006 the new GS-R-3 standard - 'The Management System for Facilities and Activities - Safety Requirements'. This work presents a brief evolution of management standards and integrated management approach, showing the Agency's new vision concerning this issue with the GS-R-3 standard publication. (author)

Achieving Quality Assurance in Nigeria University System through ...

African Journals Online (AJOL)

This paper examines how quality assurance can be attained through Strategic Human Resources Development in Nigerian University system. The purpose is to ensure quality control and maintenance of acceptable standards in the University system. To seek solution to the problem, three research questions were posed.

FACTORS DESCRIBING STUDENTS´ PERCEPTION ON EDUCATION QUALITY STANDARDS

Directory of Open Access Journals (Sweden)

Lucie Vnoučková

2017-12-01

Full Text Available Education quality assurance is the necessity for today’s competitive environment in university education. Quality assurance standards and strategies are being used in most of universities and higher education institutions. But the perception of quality standards is being usually seen from the perspective of a university management. This study aims to analyze and present perceptions of students towards a measurement of education quality standards and to identify significant groups of students according to their preferences in education quality. Students’ questionnaires and focus groups collected the data. Two dimensional and multi-dimensional statistical methods were used to evaluate the results. The outputs show five groups of students based on their perception of the education quality. Examination of students’ interest in specific areas, subjects and courses leads to identification of factors which affect their preferences in education. The paper found five significant groups of perceived quality by students. These are Quality receptionists, Business oriented, Expert innovators, Distance learners and Arrangement oriented. Limit of the study is a narrow focus on one private university. This study may encourage other papers to develop and test further the impact of education quality on students’ preferences for measurable improvements. The paper is an extension of the conference paper presented on ERIE conference 2017.

The case for regime-based water quality standards

Science.gov (United States)

G.C. Poole; J.B. Dunham; D.M. Keenan; S.T. Sauter; D.A. McCullough; C. Mebane; J.C. Lockwood; D.A. Essig; M.P. Hicks; D.J. Sturdevant; E.J. Materna; S.A. Spalding; J. Risley; M. Deppman

2004-01-01

Conventional water quality standards have been successful in reducing the concentration of toxic substances in US waters. However, conventional standards are based on simple thresholds and are therefore poorly structured to address human-caused imbalances in dynamic, natural water quality parameters, such as nutrients, sediment, and temperature. A more applicable type...

ISO 9000 Quality Management System

Science.gov (United States)

Hadjicostas, Evsevios

The ISO 9000 series describes a quality management system applicable to any organization. In this chapter we present the requirements of the standard in a way that is as close as possible to the needs of analytical laboratories. The sequence of the requirements follows that in the ISO 9001:2008 standard. In addition, the guidelines for performance improvement set out in the ISO 9004 are reviewed. Both standards should be used as a reference as well as the basis for further elaboration.

40 CFR 131.20 - State review and revision of water quality standards.

Science.gov (United States)

2010-07-01

... (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Procedures for Review and Revision of Water Quality Standards § 131.20 State review and revision of water quality standards. (a) State review. The State shall... reviewing applicable water quality standards and, as appropriate, modifying and adopting standards. Any...

CNEA's quality system documentation

International Nuclear Information System (INIS)

Mazzini, M.M.; Garonis, O.H.

1998-01-01

Full text: To obtain an effective and coherent documentation system suitable for CNEA's Quality Management Program, we decided to organize the CNEA's quality documentation with : a- Level 1. Quality manual. b- Level 2. Procedures. c-Level 3. Qualities plans. d- Level 4: Instructions. e- Level 5. Records and other documents. The objective of this work is to present a standardization of the documentation of the CNEA's quality system of facilities, laboratories, services, and R and D activities. Considering the diversity of criteria and formats for elaboration the documentation by different departments, and since ultimately each of them generally includes the same quality management policy, we proposed the elaboration of a system in order to improve the documentation, avoiding unnecessary time wasting and costs. This will aloud each sector to focus on their specific documentation. The quality manuals of the atomic centers fulfill the rule 3.6.1 of the Nuclear Regulatory Authority, and the Safety Series 50-C/SG-Q of the International Atomic Energy Agency. They are designed by groups of competent and highly trained people of different departments. The normative procedures are elaborated with the same methodology as the quality manuals. The quality plans which describe the organizational structure of working group and the appropriate documentation, will asses the quality manuals of facilities, laboratories, services, and research and development activities of atomic centers. The responsibilities for approval of the normative documentation are assigned to the management in charge of the administration of economic and human resources in order to fulfill the institutional objectives. Another improvement aimed to eliminate unnecessary invaluable processes is the inclusion of all quality system's normative documentation in the CNEA intranet. (author) [es

Quality control methodology and implementation of X-radiation standards beams, mammography level, following the standard IEC 61267

International Nuclear Information System (INIS)

Correa, Eduardo de Lima

2010-01-01

In this work it was developed and applied a quality control program of the X radiation system (160 kV, constant potential, target of tungsten) of the Calibration Laboratory of IPEN(LCI) in the energy range relative to mammography beams (from 25 kV to 35 kV). The X radiation standards beams, level mammography, using molybdenum and aluminum as additional filtration, were established after the application of this quality control program following national and international recommendations. The reference ionization chamber has traceability to PTB and was regularly submitted to quality control tests for evaluation and analysis of its performance. The radiation qualities emerging from the X-radiation assembly (RQR-M), based on a phantom made up of an aluminum added filter (RQA-M), narrow beam condition (RQN-M) and broad beam condition (RQB-M), following the recommendations of the international standard IEC 61267 (2005) and the IAEA code of practice, TRS 457 (2007) were established. For the implantation of RQN-M and RQB-M radiation qualities, two mammography phantoms were developed. The half-value layers found are those presented by the German primary laboratory PTB, and varied from 0.35 to 1.21 mm Al. The air kerma rates were obtained for all the 15 implanted qualities. (author)

Coordinating standards and applications for optical water quality sensor networks

Science.gov (United States)

Bergamaschi, B.; Pellerin, B.

2011-01-01

Joint USGS-CUAHSI Workshop: In Situ Optical Water Quality Sensor Networks; Shepherdstown, West Virginia, 8-10 June 2011; Advanced in situ optical water quality sensors and new techniques for data analysis hold enormous promise for advancing scientific understanding of aquatic systems through measurements of important biogeochemical parameters at the time scales over which they vary. High-frequency and real-time water quality data also provide the opportunity for early warning of water quality deterioration, trend detection, and science-based decision support. However, developing networks of optical sensors in freshwater systems that report reliable and comparable data across and between sites remains a challenge to the research and monitoring community. To address this, the U.S. Geological Survey (USGS) and the Consortium of Universities for the Advancement of Hydrologic Science, Inc. (CUAHSI), convened a 3-day workshop to explore ways to coordinate development of standards and applications for optical sensors, as well as handling, storage, and analysis of the continuous data they produce.

Quality standards for bone conduction implants.

Science.gov (United States)

Gavilan, Javier; Adunka, Oliver; Agrawal, Sumit; Atlas, Marcus; Baumgartner, Wolf-Dieter; Brill, Stefan; Bruce, Iain; Buchman, Craig; Caversaccio, Marco; De Bodt, Marc T; Dillon, Meg; Godey, Benoit; Green, Kevin; Gstoettner, Wolfgang; Hagen, Rudolf; Hagr, Abdulrahman; Han, Demin; Kameswaran, Mohan; Karltorp, Eva; Kompis, Martin; Kuzovkov, Vlad; Lassaletta, Luis; Li, Yongxin; Lorens, Artur; Martin, Jane; Manoj, Manikoth; Mertens, Griet; Mlynski, Robert; Mueller, Joachim; O'Driscoll, Martin; Parnes, Lorne; Pulibalathingal, Sasidharan; Radeloff, Andreas; Raine, Christopher H; Rajan, Gunesh; Rajeswaran, Ranjith; Schmutzhard, Joachim; Skarzynski, Henryk; Skarzynski, Piotr; Sprinzl, Georg; Staecker, Hinrich; Stephan, Kurt; Sugarova, Serafima; Tavora, Dayse; Usami, Shin-Ichi; Yanov, Yuri; Zernotti, Mario; Zorowka, Patrick; de Heyning, Paul Van

2015-01-01

Bone conduction implants are useful in patients with conductive and mixed hearing loss for whom conventional surgery or hearing aids are no longer an option. They may also be used in patients affected by single-sided deafness. To establish a consensus on the quality standards required for centers willing to create a bone conduction implant program. To ensure a consistently high level of service and to provide patients with the best possible solution the members of the HEARRING network have established a set of quality standards for bone conduction implants. These standards constitute a realistic minimum attainable by all implant clinics and should be employed alongside current best practice guidelines. Fifteen items are thoroughly analyzed. They include team structure, accommodation and clinical facilities, selection criteria, evaluation process, complete preoperative and surgical information, postoperative fitting and assessment, follow-up, device failure, clinical management, transfer of care and patient complaints.

Quality assurance systems at SKODA JS

International Nuclear Information System (INIS)

Janecek, P.

2000-01-01

In addition to technical requirements put upon the design, manufacture, installation and commissioning of equipment for nuclear power plants, emphasis is laid upon quality assurance of such activities so as to secure nuclear safety of installations over the world. As the technical level of nuclear safety assurance is being enhanced continuously, the requirements are becoming more and more stringent, which is mirrored by the relevant standards and legislation. SKODA JS has always been pursuing the quality goal and has been contributing to this aspect markedly. The quality assurance system at SKODA JS helps the company to satisfy all the appropriate requirements of its customers as well as the applicable standards and regulations. (author)

Standardization of Image Quality Analysis – ISO 19264

DEFF Research Database (Denmark)

Wüller, Dietmar; Kejser, Ulla Bøgvad

2016-01-01

There are a variety of image quality analysis tools available for the archiving world, which are based on different test charts and analysis algorithms. ISO has formed a working group in 2012 to harmonize these approaches and create a standard way of analyzing the image quality for archiving...... systems. This has resulted in three documents that have been or are going to be published soon. ISO 19262 defines the terms used in the area of image capture to unify the language. ISO 19263 describes the workflow issues and provides detailed information on how the measurements are done. Last...... but not least ISO 19264 describes the measurements in detail and provides aims and tolerance levels for the different aspects. This paper will present the new ISO 19264 technical specification to analyze image quality based on a single capture of a multi-pattern test chart, and discuss the reasoning behind its...

Concept of Draft International Standard for a Unified Approach to Space Program Quality Assurance

Science.gov (United States)

Stryzhak, Y.; Vasilina, V.; Kurbatov, V.

2002-01-01

For want of the unified approach to guaranteed space project and product quality assurance, implementation of many international space programs has become a challenge. Globalization of aerospace industry and participation of various international ventures with diverse quality assurance requirements in big international space programs requires for urgent generation of unified international standards related to this field. To ensure successful fulfillment of space missions, aerospace companies should design and process reliable and safe products with properties complying or bettering User's (or Customer's) requirements. Quality of the products designed or processed by subcontractors (or other suppliers) should also be in compliance with the main user (customer)'s requirements. Implementation of this involved set of unified requirements will be made possible by creating and approving a system (series) of international standards under a generic title Space Product Quality Assurance based on a system consensus principle. Conceptual features of the baseline standard in this system (series) should comprise: - Procedures for ISO 9000, CEN and ECSS requirements adaptation and introduction into space product creation, design, manufacture, testing and operation; - Procedures for quality assurance at initial (design) phases of space programs, with a decision on the end product made based on the principle of independence; - Procedures to arrange incoming inspection of products delivered by subcontractors (including testing, audit of supplier's procedures, review of supplier's documentation), and space product certification; - Procedures to identify materials and primary products applied; - Procedures for quality system audit at the component part, primary product and materials supplier facilities; - Unified procedures to form a list of basic performances to be under configuration management; - Unified procedures to form a list of critical space product components, and unified

STANDARDIZING QUALITY ASSESSMENT OF FUSED REMOTELY SENSED IMAGES

Directory of Open Access Journals (Sweden)

C. Pohl

2017-09-01

Full Text Available The multitude of available operational remote sensing satellites led to the development of many image fusion techniques to provide high spatial, spectral and temporal resolution images. The comparison of different techniques is necessary to obtain an optimized image for the different applications of remote sensing. There are two approaches in assessing image quality: 1. Quantitatively by visual interpretation and 2. Quantitatively using image quality indices. However an objective comparison is difficult due to the fact that a visual assessment is always subject and a quantitative assessment is done by different criteria. Depending on the criteria and indices the result varies. Therefore it is necessary to standardize both processes (qualitative and quantitative assessment in order to allow an objective image fusion quality evaluation. Various studies have been conducted at the University of Osnabrueck (UOS to establish a standardized process to objectively compare fused image quality. First established image fusion quality assessment protocols, i.e. Quality with No Reference (QNR and Khan's protocol, were compared on varies fusion experiments. Second the process of visual quality assessment was structured and standardized with the aim to provide an evaluation protocol. This manuscript reports on the results of the comparison and provides recommendations for future research.

Standardizing Quality Assessment of Fused Remotely Sensed Images

Science.gov (United States)

Pohl, C.; Moellmann, J.; Fries, K.

2017-09-01

The multitude of available operational remote sensing satellites led to the development of many image fusion techniques to provide high spatial, spectral and temporal resolution images. The comparison of different techniques is necessary to obtain an optimized image for the different applications of remote sensing. There are two approaches in assessing image quality: 1. Quantitatively by visual interpretation and 2. Quantitatively using image quality indices. However an objective comparison is difficult due to the fact that a visual assessment is always subject and a quantitative assessment is done by different criteria. Depending on the criteria and indices the result varies. Therefore it is necessary to standardize both processes (qualitative and quantitative assessment) in order to allow an objective image fusion quality evaluation. Various studies have been conducted at the University of Osnabrueck (UOS) to establish a standardized process to objectively compare fused image quality. First established image fusion quality assessment protocols, i.e. Quality with No Reference (QNR) and Khan's protocol, were compared on varies fusion experiments. Second the process of visual quality assessment was structured and standardized with the aim to provide an evaluation protocol. This manuscript reports on the results of the comparison and provides recommendations for future research.

[Essential guidelines for Quality Management System].

Science.gov (United States)

Daunizeau, A

2013-06-01

The guidelines describe the essential parts of the quality management system to fulfil the requirements of the standard EN ISO 15 189. It includes mainly the organisation, the definition of responsibilities, training of personnel, the document control, the quality control, identification and control of nonconformities, corrective actions, preventive actions and evaluation, as audits and the management review.

40 CFR 131.21 - EPA review and approval of water quality standards.

Science.gov (United States)

2010-07-01

... (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS Procedures for Review and Revision of Water Quality Standards § 131.21 EPA review and approval of water quality standards. (a) After the State submits its... analysis. (b) The Regional Administrator's approval or disapproval of a State water quality standard shall...

76 FR 72097 - Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards

Science.gov (United States)

2011-11-22

... Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This rule establishes air quality designations for most areas in the United States for the 2008 lead (Pb) National Ambient Air Quality Standards...

Harmonization of monographic standards is needed to ensure the quality of Chinese medicinal materials

Directory of Open Access Journals (Sweden)

Zhao Sandy

2009-09-01

Full Text Available Abstract This article provides an overview on the regulations of Chinese medicinal materials (CMMs in various countries and regions. Harmonization of CMM monographs would provide standards for the quality control of CMM products and play an important role in the modernization and globalization of Chinese medicine. A harmonized regulatory system would improve the quality of CMMs thereby ensuring the safety of the products and assisting Chinese medicine practitioners in their practice. The fast growing demand worldwide for traditional medicines calls for harmonized monographic standards to safeguard the safety and quality of CMM products.

Implementation of the ISO 9001 quality management system - process, impact and benefits

Directory of Open Access Journals (Sweden)

Aleksandar Ž. Drenovac

2013-10-01

Full Text Available Modern business is characterized by greater and greater market competition through all business areas and all activities. Establishment of market positions is a very important element of business activities in every organization. Quality of products and/or services provides recognizability at market and raising of ratings. Implementation of the ISO 9001 quality management system opens positions for secure national and international markets; it is also an identifier of an efficiently and effectively process-wise organized system in an organization. Introduction An increase of impact of quality and demands for ensuring quality before contract approvals has been visible lately. All vendors at the multinational market must ensure confidence in the quality of their products or services in order to satisfy customer demands which is an ultimate goal. Organizations which have the certificated ISO 9001 standard are known for their persistence and reliability, so they reach high reputation by applying  the standard. Implementation of a quality management system Implementation of a quality management system is done by system engineering, as a process based on a top management decision. It can be applied through the engagement of professionals from within the organization, as well as through outsourced consultants. The process is based on the PDCA cycle and the eight principles of quality management in an ISO 9001 organization. Defining assignments in accordance with the standard The Quality Manual, as a document which contains quality aims and through which a complete model of the quality management system is described, should be an initial element for the process of implementing a quality management system. It contains an overview of all procedures and directions used for achieving quality policy, i.e. for the implementation of a quality management system in every part of a business system. Implementation of procedures When the Quality manual is created

Standards and laws for indoor air quality in Russia

International Nuclear Information System (INIS)

Bitkolov, N.; Musijchuk, Y.

1997-01-01

The air quality of indoor air in Russia, including the special problems of air quality with regard to radioactive contamination, is determined by a number of statutes, standards and regulations. All these are based on the biological principles that the maximum allowable concentrations of pollutants (MAC) and the prescribed radioactive safety dose limits should not be exceeded. The standards cover the air in the working zones of all ministries and departments, and are for trade unions, public and cooperative organisations and foundations. The basic Russian law for air quality is 'The Law on Environmental Nature Protection' (19.2.1991) which assures the right to health protection from adverse environmental effects. In the field of radioactive safety 'The Federal Law on Radioactive Safety' (9.1.1996) is the primary law and in accordance with it, every citizen living in Russia has the right to protection for the present and future generations from health-related deleterious effects of atomic radiation. The laws on air quality are part of the Russian Federation legal system and are secured in the Constitution. The air quality must be controlled by the Goscomgidromet and the Sunepidnadzor of Russia. In compliance with these laws everybody has the right to a favourable environment and the duty to protect, preserve and maintain it. The air environment is unique and common to all, thus economic cooperation dictates that a dedicated approach to air quality and air quality regulations would be the most appropriate way to preserve it. It appears judicious to join forces in the name of European ecological safety. To do this, it is necessary to combine the national means and secure. (author) 4 figs

Will the circle be unbroken: a history of the U.S. National Ambient Air Quality Standards.

Science.gov (United States)

Bachmann, John

2007-06-01

In celebration of the 100th anniversary of the Air & Waste Management Association, this review examines the history of air quality management (AQM) in the United States over the last century, with an emphasis on the ambient standards programs established by the landmark 1970 Clean Air Act (CAA) Amendments. The current CAA system is a hybrid of several distinct air pollution control philosophies, including the recursive or circular system driven by ambient standards. Although this evolving system has resulted in tremendous improvements in air quality, it has been far from perfect in terms of timeliness and effectiveness. The paper looks at several periods in the history of the U.S. program, including: (1) 1900-1970, spanning the early smoke abatement and smog control programs, the first federal involvement, and the development of a hybrid AQM approach in the 1970 CAA; (2) 1971-1976, when the first National Ambient Air Quality Standards (NAAQS) were set and implemented; (3) 1977-1993, a period of the first revisions to the standards, new CAA Amendments, delays in implementation and decision-making, and key science/policy/legislative developments that would alter both the focus and scale of air pollution programs and how they are implemented; and (4) 1993-2006, the second and third wave of NAAQS revisions and their implementation in the context of the 1990 CAA. This discussion examines where NAAQS have helped drive implementation programs and how improvements in both effects and air quality/control sciences influenced policy and legislation to enhance the effectiveness of the system over time. The review concludes with a look toward the future of AQM, emphasizing challenges and ways to meet them. The most significant of these is the need to make more efficient progress toward air quality goals, while adjusting the system to address the growing intersections between air quality management and climate change.

A strategy to develop and implement Canadian standards for quality assurance in radiation therapy

International Nuclear Information System (INIS)

1999-05-01

In Canada, the Atomic Energy Control Board (AECB) regulates the limits of radiation exposure to the public and to workers in industry. In 1993, it discussed the fact that the safety of radiation therapy patients who receive medical exposures is not regulated [AE93]. The Group of Medical Advisors (GMA) to the AECB initiated a research contract to review quality assurance in Canadian radiation oncology centres and nuclear medicine departments. The review [MA95] revealed that the level of quality assurance in radiation therapy facilities varied across the country. As a result, the GMA undertook its own review of quality assurance in radiation therapy centres and made recommendations on how to achieve a uniform national system [MA98]. In response to the GMA report, the President of the AECB formed a Joint Working Group (JWG-11) to propose how Canadian Standards for Quality Assurance in Radiation Therapy could be developed and implemented. These national standards for quality assurance will serve as a common basis for establishing and evaluating quality assurance programs at individual radiation therapy centres. These standards should address the structure of quality assurance programs and quality assurance for radiation therapy equipment, personnel, and procedures. (author)

Quality system implementation for nuclear analytical techniques

International Nuclear Information System (INIS)

2004-01-01

The international effort (UNIDO, ILAC, BIPM, etc.) to establish a functional infrastructure for metrology and accreditation in many developing countries needs to be complemented by assistance to implement high quality practices and high quality output by service providers and producers in the respective countries. Knowledge of how to approach QA systems that justify a formal accreditation is available in only a few countries and the dissemination of know how and development of skills is needed bottom up from the working level of laboratories and institutes. Awareness building, convincing of management, introduction of good management practices, technical expertise and good documentation will lead to the creation of a quality culture that assures a sustainability and inherent development of quality practices as a prerequisite of economic success. Quality assurance and quality control can be used as a valuable management tool and is a prerequisite for international trade and information exchange. This publication tries to assist quality managers, Laboratory Managers and staff involved in setting up a QA/QC system in a nuclear analytical laboratory to take appropriate action to start and complete the necessary steps for a successful quality system for ultimate national accreditation. This guidebook contributes to a better understanding of the basic ideas behind ISO/IEC 17025, the international standard for 'General requirements for the competence of testing and calibration laboratories'. It provides basic information and detailed explanation about the establishment of the QC system in analytical and nuclear analytical laboratories. It is a proper training material for training of trainers and makes managers with QC management and implementation familiar. This training material aims to facilitate the implementation of internationally accepted quality principles and to promote attempts by Member States' laboratories to obtain accreditation for nuclear analytical

Reporting systems in gastrointestinal endoscopy: Requirements and standards facilitating quality improvement: European Society of Gastrointestinal Endoscopy position statement

NARCIS (Netherlands)

Bretthauer, Michael; Aabakken, Lars; Dekker, Evelien; Kaminski, Michal F.; Rösch, Thomas; Hultcrantz, Rolf; Suchanek, Stepan; Jover, Rodrigo; Kuipers, Ernst J.; Bisschops, Raf; Spada, Cristiano; Valori, Roland; Domagk, Dirk; Rees, Colin; Rutter, Matthew D.

2016-01-01

To develop standards for high quality of gastrointestinal endoscopy, the European Society of Gastrointestinal Endoscopy (ESGE) has established the ESGE Quality Improvement Committee. A prerequisite for quality assurance and improvement for all gastrointestinal endoscopy procedures is

TRAINING SYSTEM OF FUTURE SPECIALISTS: QUALITY CONTROL

Directory of Open Access Journals (Sweden)

Vladimir A. Romanov

2015-01-01

Full Text Available The aim of the investigation is development of innovative strategy of quality control training of engineers and skilled workers (hereinafter – future specialists in educational professional organizations on the principles of social partnership.Methods. Theoretic: theoretic and methodological analysis, polytheoretic synthesis, modeling. Empirical: research and generalization of the system, process and competence – based approaches experience, experiment, observation, surveys, expert evaluation, SWOT-analysis as a method of strategic planning which is to identify the internal and external factors (socio-cultural of the organization surrounding.Results. The strategy of the development of the process of quality control training in educational professional organizations and a predictive model of the system of quality control training for future engineers and workers have been created on the analysis and synthesis of a quantitative specification of the quality, the obtained experience and success in control training of future specialists in educational professional organizations in recent economic and educational conditions.Scientific novelty. There has been built a predicative model of quality control training of future specialists to meet modern standards and the principles of social partnership; the control algorithm of the learning process, developed in accordance with the standards (international of quality ISO in the implementation of the quality control systems of the process approach (matrix-based responsibility, competence and remit of those responsible for the education process in the educational organization, the «problem» terms and diagnostic tools for assessing the quality of professional training of future specialists. The perspective directions of innovation in the control of the quality of future professionals training have been determined; the parameters of a comprehensive analysis of the state of the system to ensure the

[Implementation of a quality management system according to the UNE-UN-ISO 9001:2008 standard in a nuclear medicine department].

Science.gov (United States)

Poblete García, V M; Talavera Rubio, M P; Palomar Muñoz, A; Pilkington Woll, J P; Cordero García, J M; García Vicente, A M; Bellón Guardia, M; González García, B; Cañuelo Merino, T; Núñez García, A; Peiró Valgañón, V; Soriano Castrejón, A M

2013-01-01

To describe the process of implementing a quality management system according to UNE-EN-ISO 9001:2008 standard in a Nuclear Medicine Department. In February 2008, the committee on internal quality of the Department was established, naming a responsible physician. The general operating plan was drawn up, following the requirements established by the ISO 9001:2008 standard. It defined the scope of the standard, defining, preparing and transcribing the various activities of our Department. Four training sessions were carried out. A total of nine general and two specific procedures were documented in which all the activities performed in our Department were included. Personnel records of each worker were created, including their profiles and training plan. A record of the equipment and service providers was created, as well as issues with the latter. Satisfaction surveys were obtained from external (patients) and internal customers (faculty applicants). Targets for improvement and activity markers were established. Two audits were performed to complete the process, one internal and one external. The Department was accredited in April 2010. The quality accreditation process is a tool that requires reflection on how we do things and how they can be improved. It makes it possible to measure what we do, to analyze and introduce improvement measures, and therefore, to achieve a higher level of quality in the service we provide our customers. The involvement of the Department workers with a commitment to team performance was essential. Copyright © 2011 Elsevier España, S.L. and SEMNIM. All rights reserved.

Quality Rating and Improvement System State Evaluations and Research

Science.gov (United States)

Ferguson, Daniel

2016-01-01

A quality rating and improvement system (QRIS) is a method used by states and local jurisdictions to assess the level of quality of child care and early education programs, improve quality, and convey quality ratings to parents and other consumers. A typical QRIS incorporates the following components: quality standards for participating providers;…

Environmental Quality Standards in the EC-Water Framework Directive

DEFF Research Database (Denmark)

Jirka, Gerhard H.; Burrows, Richard; Larsen, Torben

2004-01-01

The "combined approach" in the new EC-Water Framework Directive(WFD) consisting of environmental quality standards in addition to emission limit values promises improvements in the quality characteristics of surface water. However, the specification of where in the water body the environmental...... quality standards apply is missing in the WFD. The omission will limit its administrative implementation. A clear mixing zone regulation is needed so that the quality objectives of the WFD are not jeopardized. This need is demonstrated using the examples of point source discharges into rivers and coastal...

[Study on seed quality test and quality standard of Lonicera macranthoides].

Science.gov (United States)

Zhang, Ying; Xu, Jin; Li, Long-Yun; Cui, Guang-Lin; She, Yue-Hui

2016-04-01

Referring to the rules for agricultural seed testing (GB/T 3543-1995) issued by China, the test of sampling, purity, thousand seed weight, moisture, viability, relative conductivity and germination rate had been studied for seed quality test methods of Lonicera macranthoides. The seed quality from 38 different collection areas was measured to establish quality classification standard by K-means clustering. The results showed that at least 7.5 g seeds should be sampled, and passed 20-mesh sieve for purity analysis.The 500-seed method used to measure thousand seed weight. The moisture was determined by crushed seeds dried in high temperature (130±2) ℃ for 3 h.The viability determined by 25 ℃ 0.1% TTC stained 5h in dark. 1.0 g seeds soaked in 50 ml ultra pure water in 25 ℃ for 12 hours to determine the relative conductivity. The seed by 4 ℃stratification for 80 days were cultured on paper at 15 ℃. Quality of the seeds from different areas was divided into three grades. The primary seed quality classification standard was established.The I grade and II grade were recommend use in production. Copyright© by the Chinese Pharmaceutical Association.

40 CFR 121.25 - Adoption of new water quality standards.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Adoption of new water quality... Administrator § 121.25 Adoption of new water quality standards. (a) In any case where: (1) A license or permit was issued without certification due to the absence of applicable water quality standards; and (2...

British Thoracic Society Quality Standards for acute non-invasive ventilation in adults

Science.gov (United States)

Davies, Michael; Allen, Martin; Bentley, Andrew; Bourke, Stephen C; Creagh-Brown, Ben; D’Oliveiro, Rachel; Glossop, Alastair; Gray, Alasdair; Jacobs, Phillip; Mahadeva, Ravi; Moses, Rachael; Setchfield, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the provision of acute non-invasive ventilation in adults together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 6 quality statements have been developed, each describing a standard of care for the provision of acute non-invasive ventilation in the UK, together with measurable markers of good practice. Conclusion BTS Quality Standards for acute non-invasive ventilation in adults form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline’s recommendations. PMID:29636979

Publication and Distribution of Chinese Standard and Quality Books

Institute of Scientific and Technical Information of China (English)

Bai Demei

2010-01-01

@@ 1.A Brief Introduction to SPC Standards Press of China (SPC),founded in October,1963,is the largest publisher of standard and quality products in China.It publishes national standards,trade standards,and audio,video,electronic,and network products.

Power quality in power systems and electrical machines

CERN Document Server

Fuchs, Ewald

2015-01-01

The second edition of this must-have reference covers power quality issues in four parts, including new discussions related to renewable energy systems. The first part of the book provides background on causes, effects, standards, and measurements of power quality and harmonics. Once the basics are established the authors move on to harmonic modeling of power systems, including components and apparatus (electric machines). The final part of the book is devoted to power quality mitigation approaches and devices, and the fourth part extends the analysis to power quality solutions for renewable

USL/DBMS NASA/PC R and D project system design standards

Science.gov (United States)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1984-01-01

A set of system design standards intended to assure the completeness and quality of designs developed for PC research and development projects is established. The standards presented address the areas of problem definition, initial design plan, design specification, and re-evaluation.

An Approach to Establishing International Quality Standards for Medical Travel

Directory of Open Access Journals (Sweden)

Ondřej eKácha

2016-03-01

Full Text Available Traveling abroad to receive a non-elective treatment is expanding each year. Such rising popularity of medical travel and the absence of clear minimum quality requirements in this area urgently calls for setting international standards to ensure good practice and patient safety. The aim of this study is to identify the key domains in medical travel where such quality standards should be established. Drawing from the evidence-based OECD framework and an extensive literature review, this study proposes three critical areas for international quality standards in medical travel: minimum standards of health care facilities and third-party agencies, financial responsibility and patient-centeredness. Several cultural challenges are subsequently introduced that may pose a barrier to the development of the guidelines and should be additionally taken into consideration. Establishing international quality standards in medical travel enhances the benefits to patients and providers, which is urgently needed given the rapid growth in this industry.

Voice Quality in Mobile Telecommunication System

Directory of Open Access Journals (Sweden)

Evaldas Stankevičius

2013-05-01

Full Text Available The article deals with methods measuring the quality of voice transmitted over the mobile network as well as related problem, algorithms and options. It presents the created voice quality measurement system and discusses its adequacy as well as efficiency. Besides, the author presents the results of system application under the optimal hardware configuration. Under almost ideal conditions, the system evaluates the voice quality with MOS 3.85 average estimate; while the standardized TEMS Investigation 9.0 has 4.05 average MOS estimate. Next, the article presents the discussion of voice quality predictor implementation and investigates the predictor using nonlinear and linear prediction methods of voice quality dependence on the mobile network settings. Nonlinear prediction using artificial neural network resulted in the correlation coefficient of 0.62. While the linear prediction method using the least mean squares resulted in the correlation coefficient of 0.57. The analytical expression of voice quality features from the three network parameters: BER, C / I, RSSI is given as well.Article in Lithuanian

[Quality assurance and certification of a hemodialysis unit according to the ISO-9001-2000 standards].

Science.gov (United States)

Arenas, M D; Gil, M T; Egea, J J; Sirvent, A E; Giménez, A

2003-01-01

We report the experience of three hemodialysis centers registered with the ISO 9001-2000 standard, regarding the development of a quality measure system and providing an analysis of this system and its advantages and disadvantages.

[Evaluation of the quality control system in blood transfusion service].

Science.gov (United States)

Jovanović, R

2000-01-01

Implementation of quality system improvement at the Blood Transfusion Institute Novi Sad, included adjustments in practice to the request of ISO 9001 standard. Quality improvement must be a permanent activity of the Institute. The audit is a management tool for monitoring the quality assurance system and is either a quality audit or a medical audit. A well planned, comprehensive quality audit covers each activity of the Blood Transfusion Institute. The procedures may be internal or external. Quality manager is responsible for annual internal quality audits. The purpose of internal audits is to check the efficiency of the quality system in terms of realization of quality policy, fulfullment of designed targets and implementation of quality system documents. An internal quality audit is performed in accordance with the procedure and audit findings are reported to the management in a form of internal quality report as a part of quality system review. The findings must be communicated to all persons responsible for the controlled area. Quality manager can initiate an internal quality audit whenever it is realized that problems about the quality system have occurred. Audits are conducted by the quality manager or an audit team. The accurate list of internal auditors is kept in the Institute archive. Medical audit carried out by a transfusion committee, evaluates the quality of blood transfusion for determining the degree of compliance with established local or national guidelines, in order to promote optimal transfusion practice. Audits are not only used for determining further quality management activities, but also make basis for creating and maintenance of excellent relations with product and service users. Considering all this, Blood Transfusion Institute exceeds the requirements of ISO 9000 standards series.

Quality and standards in electronics

CERN Document Server

Tricker, Ray

1997-01-01

A manufacturer or supplier of electronic equipment or components needs to know the precise requirements for component certification and quality conformance to meet the demands of the customer. This book ensures that the professional is aware of all the UK, European and International necessities, knows the current status of these regulations and standards, and where to obtain them.

Determination of water environment standards based on water quality criteria in China: Limitations and feasibilities.

Science.gov (United States)

Wang, Tieyu; Zhou, Yunqiao; Bi, Cencen; Lu, Yonglong; He, Guizhen; Giesy, John P

2017-07-01

There is a need to formulate water environment standards (WESs) from the current water quality criteria (WQC) in China. To this end, we briefly summarize typical mechanisms applied in several countries with longer histories of developing WESs, and three limitations to formulating WESs in China were identified. After analyzing the feasibility factors including economic development, scientific support capability and environmental policies, we realized that China is still not ready for a complete change from its current nation-wide unified WES system to a local-standard-based system. Thus, we proposed a framework for transformation from WQC to WESs in China. The framework consists of three parts, including responsibilities, processes and policies. The responsibilities include research authorization, development of guidelines, and collection of information, at both national and local levels; the processes include four steps and an impact factor system to establish water quality standards; and the policies include seven specific proposals. Copyright © 2016. Published by Elsevier B.V.

77 FR 74923 - Water Quality Standards for the State of Florida's Estuaries, Coastal Waters, and South Florida...

Science.gov (United States)

2012-12-18

... proposing numeric water quality criteria to protect ecological systems, aquatic life, and human health from... III surface waters share water quality criteria established to protect fish consumption, recreation... Water Quality Standards for the State of Florida's Estuaries, Coastal Waters, and South Florida Inland...

Design of a quality assurance system in the nuclear fuel fabrication

International Nuclear Information System (INIS)

Garcia Rojas Palacios, L.

1992-01-01

A)For the first time a project on nuclear fuel fabrication is going to be lead in this country. For this reason the work is oriented to establish a quality assurance system for the different stages of fuel fabrication. C) The work of this thesis was developed first by means of an analysis of quality philosophies of Deming, Ishikawa, Juran and Crosby from which several important points were stracted to be used in the designed quality system. Metrology and normalization are so important for quality control that a study of them is made considering definitions, unit systems and type of errors (for Metrology) as well as standards for quality systems, qualification, destructive and non destructive tests, shipment, packing for nuclear power plants. With the standards as a basis, the working strategy for the system was reached, as well as the design of control cards and the design of documents for inspection control, personnel and its documentation and finally the diagrams for each one of the fabrication stages

ISO/TS 16949 system in quality aspect

Directory of Open Access Journals (Sweden)

Joanna Rosak-Szyrocka

2014-12-01

Full Text Available In the automotive industry the use of modern technology and provision of the highest quality product and related services is the most important element of rivalry between global corporations and motorcycles. In a competitive struggle for the recognition of its brand in the automotive market global organizations continuously raise the requirements for quality management systems, so that the finished product meets all the standards in terms of safety, quality and satisfying the ever-growing needs of customers - present and future drivers and passengers of cars. ISO/TS 16949 quality management system is presented in the paper. A framework for customer specific requirement as well as preventing problems is shown.

A quality control of proteomic experiments based on multiple isotopologous internal standards

Directory of Open Access Journals (Sweden)

Adele Bourmaud

2015-09-01

Full Text Available The harmonization of proteomics experiments facilitates the exchange and comparison of results. The definition of standards and metrics ensures reliable and consistent data quality. An internal quality control procedure was developed to assess the different steps of a proteomic analysis workflow and perform a system suitability test. The method relies on a straightforward protocol using a simple mixture of exogenous proteins, and the sequential addition of two sets of isotopically labeled peptides added to reference samples. This internal quality control procedure was applied to plasma samples to demonstrate its easy implementation, which makes it generic for most proteomics applications.

Measurement system as a subsystem of the quality management system

OpenAIRE

Ľubica Floreková; Ján Terpák; Marcela Čarnogurská

2006-01-01

Each measurement system and a control principle must be based on certain facts about the system behaviour (what), operation (how) and structure (why). Each system is distributed into subsystems that provide an input for the next subsystem. For each system, start is important the begin, that means system characteristics, collecting of data, its hierarchy and the processes distribution.A measurement system (based on the chapter 8 of the standard ISO 9001:2000 Quality management system, requirem...

Implementing a Quality Management System in the Medical Microbiology Laboratory.

Science.gov (United States)

Carey, Roberta B; Bhattacharyya, Sanjib; Kehl, Sue C; Matukas, Larissa M; Pentella, Michael A; Salfinger, Max; Schuetz, Audrey N

2018-07-01

This document outlines a comprehensive practical approach to a laboratory quality management system (QMS) by describing how to operationalize the management and technical requirements described in the ISO 15189 international standard. It provides a crosswalk of the ISO requirements for quality and competence for medical laboratories to the 12 quality system essentials delineated by the Clinical and Laboratory Standards Institute. The quality principles are organized under three main categories: quality infrastructure, laboratory operations, and quality assurance and continual improvement. The roles and responsibilities to establish and sustain a QMS are outlined for microbiology laboratory staff, laboratory management personnel, and the institution's leadership. Examples and forms are included to assist in the real-world implementation of this system and to allow the adaptation of the system for each laboratory's unique environment. Errors and nonconforming events are acknowledged and embraced as an opportunity to improve the quality of the laboratory, a culture shift from blaming individuals. An effective QMS encourages "systems thinking" by providing a process to think globally of the effects of any type of change. Ultimately, a successful QMS is achieved when its principles are adopted as part of daily practice throughout the total testing process continuum. Copyright © 2018 American Society for Microbiology.

Conceptualising a system for quality clinical decision-making in ...

African Journals Online (AJOL)

As a feedback mechanism to promote or improve the quality of clinical decisions in nursing, standards for quality clinical decision-making are proposed in an exemplary manner. In addition, a system for quality clinical decisionmaking in nursing capitalises on the heritage of the nursing process. Considering the changes and ...

Rethinking Space Design Standards Toward Quality Affordable Housing In Malaysia

Directory of Open Access Journals (Sweden)

Ishak Nor Haniza

2016-01-01

Full Text Available Provision of affordable housing is important to low- and middle-income population. A fit form of house will not only fulfil a basic human need for shelter, but it also contributes to physical and psychological well-being of the occupants. Excellent quality and affordable housing is an indication of a high quality of life. While writings exist on various aspects of the quality of affordable housing in Malaysia, discussion regarding space and design standards has scarcely been given any serious academic attention. Standards concerning residential development usually cover different aspects or stages of the development process. They can include planning standards, design standards, space standards and technical construction standards. The main concern of this paper is on space and design standards specifically. Space standard can be defined as a set of framework which dictates fixed internal space minimums. Meanwhile, design standard indicates design guidelines to ensure the functionality, comfortability and habitability of the house. This paper is concerned exclusively with indoor spaces of a house excluding external circulation spaces and service facilities (in case of strata housing. Its interest is in internal space as an aspect of housing quality. It can be concluded that one of the way forward will be to find the balance between providing adequate minimum spaces for resident satisfactions and having economic values for housing developers. This paper may be used as a valuable reference for authorities and policy makers to better address the best housing space design standards that would benefit not only the occupants, but also the local government and developers alike.

78 FR 66655 - Consumer Information; Uniform Tire Quality Grading Standards

Science.gov (United States)

2013-11-06

... information indicating the relative performance of passenger car tires in the areas of treadwear, traction... [Docket No. NHTSA-2013-0120] RIN 2127-AL49 Consumer Information; Uniform Tire Quality Grading Standards...). ACTION: Interim final rule; request for comments. SUMMARY: The Uniform Tire Quality Grading Standards...

Standards and guidelines applicable for the validation of programmable automation systems

International Nuclear Information System (INIS)

Haapanen, P.; Maskuniitty, M.

1993-02-01

The validation of programmable automation system for an application important to safety in a nuclear power plant requires a comprehensive view about the system quality and reliability. One central point is to get assured that proper international guidelines and standards have been followed in the design, construction and maintenance of the system. The study was directed to locate international standards and guidelines which can support the validation of programmable systems and to evaluate their applicability for the validation of systems on different levels of requirement during their life cycle. The publication reviews the most important international standards (IAEA, ISO, IEC, IEEE) and their basic principles both for system and application program. Several nuclear standards, which have drawn the main attention, and some general programmable automation standards have been examined. In addition one practical automation system has been examined in order to find essential questions. Based on these studies a set of important items for the qualification have been identified

British Thoracic Society quality standards for the investigation and management of pulmonary nodules

Science.gov (United States)

Baldwin, David; Callister, Matthew; Akram, Ahsan; Cane, Paul; Draffan, Jeanette; Franks, Kevin; Gleeson, Fergus; Graham, Richard; Malhotra, Puneet; Pearson, Philip; Subesinghe, Manil; Waller, David; Woolhouse, Ian

2018-01-01

Introduction The purpose of the quality standards document is to provide healthcare professionals, commissioners, service providers and patients with a guide to standards of care that should be met for the investigation and management of pulmonary nodules in the UK, together with measurable markers of good practice. Methods Development of British Thoracic Society (BTS) Quality Standards follows the BTS process of quality standard production based on the National Institute for Health and Care Excellence process manual for the development of quality standards. Results 7 quality statements have been developed, each describing a key marker of high-quality, cost-effective care for the investigation and management of pulmonary nodules, and each statement is supported by quality measures that aim to improve the structure, process and outcomes of healthcare. Discussion BTS Quality Standards for the investigation and management of pulmonary nodules form a key part of the range of supporting materials that the Society produces to assist in the dissemination and implementation of guideline recommendations. PMID:29682290

Could Innovation also Emerge from the Public Sector? Creating an ISO-like Judiciary Quality Management Standard.

Directory of Open Access Journals (Sweden)

Rodrigo Murillo

2013-10-01

Full Text Available This paper explores the conceptual differences between the GICA-Justicia Project initiative and other available models, process performance guidelines, and tools. Comparison was basically carried out through a review of specialized literature, papers, and reports; semi-structured interviews and focus groups with experts in the judicial quality assurance field from different countries; and applying the authors’ experience as technical counterparts in the GICA-Justicia Project (co-authoring a Quality Management Standard and training/auditing during the Quality Management System deployment and accreditation stages.  The paper is meant to unveil how the GICA-Justicia Quality Management Model and the GICA-Justicia Quality Management Standard, as  GICA-Justicia Project by-products, combine to create an innovative process performance approach to quality assurance in judicial environments.

25 CFR 273.38 - Equal quality and standard of education.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Equal quality and standard of education. 273.38 Section... EDUCATION ASSISTANCE ACT PROGRAM EDUCATION CONTRACTS UNDER JOHNSON-O'MALLEY ACT Funding Provisions § 273.38 Equal quality and standard of education. Contracts with State education agencies or school districts...

QUALITY MANAGEMENT SYSTEM IN CLINICAL LABORATORIES ACCORDING TO THE ISO 15189:2007 STANDARD - EVALUATION OF THE BENEFITS OF IMPLEMENTATION IN AN ASSISTED REPRODUCTION LABORATORY

Directory of Open Access Journals (Sweden)

A.D. Sialakouma

2011-03-01

Full Text Available Biomedical science is a sensitive discipline and presents unique challenges due to its social character, continuous development and competitiveness. The issue of quality management systems and accreditation is gaining increasing interest in this sector. All over Europe, Health Services Units have started to introduce quality management systems and harmonization of criteria for accreditation is of increasing importance. Moreover, clinical laboratories, like the Assisted Reproduction laboratories and biochemical laboratories are required to apply a Quality Management System in order to ensure their correct, scientific and effective operation. Ultimately, it is a moral obligation for every health care organisation to supply the best possible care for the patient. The specific features and the diversity of clinical laboratories led to the introduction (2003 and, recently to the revision (2007 of the international standard ISO 15189, which is the first international standard developed specifically to address the requirements for accreditation of this type of laboratory. The basic principles for the quality assurance in the clinical laboratories are: x Complete and unambiguous standardized operating procedures. x Complete and unambiguous directives of operation. x Obligatory detailed written documentation, i.e., how each action is done, who will do it, where will this action take place and when. x Suitable scheduling of calibration/control/preventive maintenance of laboratory equipment and recording of each activity. x Distribution of responsibilities among the staff and continuous education and briefing according to current scientific data. x Complete and informed record file keeping. x Continuous improvement which is monitored with the adoption of quantified indicators. x Internal and external audit of all activities. x Troubleshooting. All these principles should be supported by the Management in order that the necessary adaptations should be made

40 CFR 125.61 - Existence of and compliance with applicable water quality standards.

Science.gov (United States)

2010-07-01

... applicable water quality standards. 125.61 Section 125.61 Protection of Environment ENVIRONMENTAL PROTECTION... Water Act § 125.61 Existence of and compliance with applicable water quality standards. (a) There must exist a water quality standard or standards applicable to the pollutant(s) for which a section 301(h...

Progress in France of the standardization of multi-level quality assurance

International Nuclear Information System (INIS)

Debout, E.

1982-01-01

Quality assurance has evolved in a steady but somewhat haphazard manner in various industries, each of which has drawn up its own standards. Examples of this are the armaments industry under the auspices of NATO, nuclear energy (IAEA guides), the French aerospace industries and the Industrial Monitoring Service for Armaments in France. For the sake of both the supplier companies and the customers, these differing and sometimes incompatible requirements should be brought into line. At the instigation of the French Association for Industrial Quality Control (AFCIQ), the French Association for Standardization (AFNOR) is therefore in the process of publishing a series of documents on quality management and assurance. For its part, the International Organization for Standardization (ISO) has set up a committee (TC 176) to standardize quality assurance. The different documents provide for various levels of quality assurance, the compatibility of which will have to be closely monitored. (author)

Solution standards for quality control of nuclear-material analytical measurements

International Nuclear Information System (INIS)

Clark, J.P.

1981-01-01

Analytical chemistry measurement control depends upon reliable solution standards. At the Savannah River Plant Control Laboratory over a thousand analytical measurements are made daily for process control, product specification, accountability, and nuclear safety. Large quantities of solution standards are required for a measurement quality control program covering the many different analytical chemistry methods. Savannah River Plant produced uranium, plutonium, neptunium, and americium metals or oxides are dissolved to prepare stock solutions for working or Quality Control Standards (QCS). Because extensive analytical effort is required to characterize or confirm these solutions, they are prepared in large quantities. These stock solutions are diluted and blended with different chemicals and/or each other to synthesize QCS that match the matrices of different process streams. The target uncertainty of a standard's reference value is 10% of the limit of error of the methods used for routine measurements. Standard Reference Materials from NBS are used according to special procedures to calibrate the methods used in measuring the uranium and plutonium standards so traceability can be established. Special precautions are required to minimize the effects of temperature, radiolysis, and evaporation. Standard reference values are periodically corrected to eliminate systematic errors caused by evaporation or decay products. Measurement control is achieved by requiring analysts to analyze a blind QCS each shift a measurement system is used on plant samples. Computer evaluation determines whether or not a measurement is within the +- 3 sigma control limits. Monthly evaluations of the QCS measurements are made to determine current bias correction factors for accountability measurements and detect significant changes in the bias and precision statistics. The evaluations are also used to plan activities for improving the reliability of the analytical chemistry measurements

Introduction to ISO 15189: a blueprint for quality systems in veterinary laboratories.

Science.gov (United States)

Freeman, Kathleen P; Bauer, Natali; Jensen, Asger L; Thoresen, Stein

2006-06-01

A trend in human and veterinary medical laboratory management is to achieve accreditation based on international standards. The International Organization for Standardization (ISO) 15189 standard is the first developed especially for accreditation of medical laboratories, and emphasizes the laboratory-client interface. European veterinary laboratories seeking to train candidates for the certification examination of the European College of Veterinary Clinical Pathology (ECVCP) require approval by the ECVCP Laboratory Standards Committee, which bases its evaluation in part on adherence to quality systems described in the ISO 15189 standards. The purpose of this article was to introduce the latest ISO quality standard and describe its application to veterinary laboratories in Europe, specifically as pertains to accreditation of laboratories involved in training veterinary clinical pathologists. Between 2003 and 2006, the Laboratory Standards Committee reviewed 12 applications from laboratories (3 commercial and 9 university) involved in training veterinary clinical pathologists. Applicants were asked to provide a description of the facilities for training and testing, current methodology and technology, health and safety policy, quality assurance policy (including internal quality control and participation in an external quality assurance program), written standard operating procedures (SOPs) and policies, a description of the laboratory information system, and personnel and training. Also during this time period multiple informal and formal discussions among ECVCP diplomates took place as to current practices and perceived areas of concern with regard to laboratory accreditation requirements. Areas in which improvement most often was needed in veterinary laboratories applying for ECVCP accreditation were the written quality plan, defined quality requirements for the tests performed, written SOPs and policies, training records, ongoing audits and competency

Quality of Standard Reference Materials for Short Time Activation Analysis

International Nuclear Information System (INIS)

Ismail, S.S.; Oberleitner, W.

2003-01-01

Some environmental reference materials (CFA-1633 b, IAEA-SL-1, SARM-1,BCR-176, Coal-1635, IAEA-SL-3, BCR-146, and SRAM-5) were analysed by short-time activation analysis. The results show that these materials can be classified in three groups, according to their activities after irradiation. The obtained results were compared in order to create a quality index for determination of short-lived nuclides at high count rates. It was found that Cfta is not a suitable standard for determining very short-lived nuclides (half-lives<1 min) because the activity it produces is 15-fold higher than that SL-3. Biological reference materials, such as SRM-1571, SRM-1573, SRM-1575, SRM-1577, IAEA-392, and IAEA-393, were also investigated by a higher counting efficiency system. The quality of this system and its well-type detector for investigating short-lived nuclides was discussed

26 CFR 1.23-4 - Performance and quality standards. [Reserved

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Performance and quality standards. [Reserved] 1.23-4 Section 1.23-4 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY INCOME TAX INCOME TAXES Changes in Rates During A Taxable Year § 1.23-4 Performance and quality standards. [Reserved...

Accounting quality and the adoption of IASB standards: portuguese evidence

Directory of Open Access Journals (Sweden)

Ana Isabel Morais

2008-12-01

Full Text Available Through rule 1606/2002 by the European Commission, Portuguese listed firms were required to adopt IASB standards in the preparation and presentation of consolidated accounts for the periods beginning on or after 2005. IASB standards are developed in environments where accounting practices are especially directed at the private sector, reporting rules are largely unaffected by taxation requirements and capital is traditionally raised in public markets. However, in Portugal, financial reporting is closely related to tax reporting and banks play a key role in providing finance and inside access to information. We investigate whether adopting IASB standards is associated with higher earnings quality and higher value relevance. We compare the earnings quality and value relevance of accounting data of 34 Portuguese listed firms before (1995-2004 and after (2004-2005 the adoption of IASB standards. We find that firms, during the period when they adopt IASB standards, report less smooth earnings than those firms in periods when they adopted national accounting standards, which seems to suggest an improvement in earnings quality. However, we also find that the value relevance of accounting information decreases with the adoption of IASB standards.

Improving the safety and quality of nursing care through standardized operating procedures in Bosnia and Herzegovina.

Science.gov (United States)

Ausserhofer, Dietmar; Rakic, Severin; Novo, Ahmed; Dropic, Emira; Fisekovic, Eldin; Sredic, Ana; Van Malderen, Greet

2016-06-01

We explored how selected 'positive deviant' healthcare facilities in Bosnia and Herzegovina approach the continuous development, adaptation, implementation, monitoring and evaluation of nursing-related standard operating procedures. Standardized nursing care is internationally recognized as a critical element of safe, high-quality health care; yet very little research has examined one of its key instruments: nursing-related standard operating procedures. Despite variability in Bosnia and Herzegovina's healthcare and nursing care quality, we assumed that some healthcare facilities would have developed effective strategies to elevate nursing quality and safety through the use of standard operating procedures. Guided by the 'positive deviance' approach, we used a multiple-case study design to examine a criterion sample of four facilities (two primary healthcare centres and two hospitals), collecting data via focus groups and individual interviews. In each studied facility, certification/accreditation processes were crucial to the initiation of continuous development, adaptation, implementation, monitoring and evaluation of nursing-related SOPs. In one hospital and one primary healthcare centre, nurses working in advanced roles (i.e. quality coordinators) were responsible for developing and implementing nursing-related standard operating procedures. Across the four studied institutions, we identified a consistent approach to standard operating procedures-related processes. The certification/accreditation process is enabling necessary changes in institutions' organizational cultures, empowering nurses to take on advanced roles in improving the safety and quality of nursing care. Standardizing nursing procedures is key to improve the safety and quality of nursing care. Nursing and Health Policy are needed in Bosnia and Herzegovina to establish a functioning institutional framework, including regulatory bodies, educational systems for developing nurses' capacities or the

Nursing Quality Assurance: The Wisconsin System

Science.gov (United States)

Hover, Julie; Zimmer, Marie J.

1978-01-01

Evaluation model guidelines for hospital departments of nursing to use in their nursing quality assurance programs are presented as developed in Wisconsin. Four essential components of the Wisconsin outcome evaluation system are criteria, assessment, standards, and improvement of care. Sample tests and charts are included in the article. (MF)

78 FR 20252 - Water Quality Standards; Withdrawal of Certain Federal Water Quality Criteria Applicable to...

Science.gov (United States)

2013-04-04

... Water Quality Standards; Withdrawal of Certain Federal Water Quality Criteria Applicable to California... aquatic life water quality criteria applicable to waters of New Jersey, Puerto Rico, and California's San Francisco Bay. In 1992, EPA promulgated the National Toxics Rule or NTR to establish numeric water quality...

QUALITY - SOCIAL ACCOUNTABILITY - HEALTH AND SAFETY INTEGRATED MANAGEMENT SYSTEM AUDIT ACCORDING TO THE REQUIREMENTS OF ISO9001:2008, SA 8000:2008, OHSAS 18001:2007 AND ISO 19011:2011 STANDARDS

Directory of Open Access Journals (Sweden)

Valentina TUDOR

2014-06-01

Full Text Available The purpose of this paper is to present a method of perfecting the audit of the social requirements of the quality social accountability-health and safety integrated management system with the social requirements of BusinessSocial Compliance Initiative (BSCI and Supplier Ethical Data Exchange (SEDEX. The method used was tosupplement the social requirement of SA 8000:2008 standard with the additional requirements of BSCI and SEDEX.The results are based on a correspondence between the requirements of SA 8000:2008 standard and therequirements of BSCI and SEDEX codes of conducts, because some of BSCI and SEDEX requirements are moredetailed than SA 8000:2008 standard requirements which are the base for the implementation of socialrequirements of the quality-social accountability-health and safety integrated management system. A check list waselaborated with the integrated social requirements of SA 8000:2008, BSCI and SEDEX. The check list is related tochild labour, forced and compulsory labour, health and safety, freedom of association & right to collective bargaining, discrimination, disciplinary practices, working hours, remuneration and management system. Theconclusion of the paper is that the elaborated check list allows the quality-social accountability-health and safety integrated management system audit to match to the requirements of BSCI and SEDEX.

Stable aesthetic standards delusion: changing 'artistic quality' by elaboration.

Science.gov (United States)

Carbon, Claus-Christian; Hesslinger, Vera M

2014-01-01

The present study challenges the notion that judgments of artistic quality are based on stable aesthetic standards. We propose that such standards are a delusion and that judgments of artistic quality are the combined result of exposure, elaboration, and discourse. We ran two experiments using elaboration tasks based on the repeated evaluation technique in which different versions of the Mona Lisa had to be elaborated deeply. During the initial task either the version known from the Louvre or an alternative version owned by the Prado was elaborated; during the second task both versions were elaborated in a comparative fashion. After both tasks multiple blends of the two versions had to be evaluated concerning several aesthetic key variables. Judgments of artistic quality of the blends were significantly different depending on the initially elaborated version of the Mona Lisa, indicating experience-based aesthetic processing, which contradicts the notion of stable aesthetic standards.

Assessing Quality of Data Standards: Framework and Illustration Using XBRL GAAP Taxonomy

Science.gov (United States)

Zhu, Hongwei; Wu, Harris

The primary purpose of data standards or metadata schemas is to improve the interoperability of data created by multiple standard users. Given the high cost of developing data standards, it is desirable to assess the quality of data standards. We develop a set of metrics and a framework for assessing data standard quality. The metrics include completeness and relevancy. Standard quality can also be indirectly measured by assessing interoperability of data instances. We evaluate the framework using data from the financial sector: the XBRL (eXtensible Business Reporting Language) GAAP (Generally Accepted Accounting Principles) taxonomy and US Securities and Exchange Commission (SEC) filings produced using the taxonomy by approximately 500 companies. The results show that the framework is useful and effective. Our analysis also reveals quality issues of the GAAP taxonomy and provides useful feedback to taxonomy users. The SEC has mandated that all publicly listed companies must submit their filings using XBRL. Our findings are timely and have practical implications that will ultimately help improve the quality of financial data.

Do Energy Efficiency Standards Improve Quality? Evidence from a Revealed Preference Approach

Energy Technology Data Exchange (ETDEWEB)

Houde, Sebastien [Univ. of Maryland, College Park, MD (United States); Spurlock, C. Anna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-06-01

Minimum energy efficiency standards have occupied a central role in U.S. energy policy for more than three decades, but little is known about their welfare effects. In this paper, we employ a revealed preference approach to quantify the impact of past revisions in energy efficiency standards on product quality. The micro-foundation of our approach is a discrete choice model that allows us to compute a price-adjusted index of vertical quality. Focusing on the appliance market, we show that several standard revisions during the period 2001-2011 have led to an increase in quality. We also show that these standards have had a modest effect on prices, and in some cases they even led to decreases in prices. For revision events where overall quality increases and prices decrease, the consumer welfare effect of tightening the standards is unambiguously positive. Finally, we show that after controlling for the effect of improvement in energy efficiency, standards have induced an expansion of quality in the non-energy dimension. We discuss how imperfect competition can rationalize these results.

Fuzzy system for risk analysis in software projects through the attributes of quality standards iso 25000

Directory of Open Access Journals (Sweden)

Chau Sen Shia

2014-02-01

Full Text Available With the growth in demand for products and services in the IT area, companies encounter difficulties in establishing a metric or measure of quality of services to address measurably qualitative values in their planning. In this work fuzzy logic, standard SQuaRE (measurement of the quality of software products, Likertscale, GQM method (Goal-Question-Metric -indicator of quality of Software and the project risk analysis model of Boehm were used to assess the quality of services and decision-making, according to your demand and requests for software development. With the aim of improving the quality in the provision of services, the application is used to integrate the team and follow the life cycle of a project from its initial phase, and to assist in the comparison with the proposed schedule during the requirements elicitation.

Quality assurance standards: comparison between IAEA 50-C/SG-Q and ISO 9001:1994

International Nuclear Information System (INIS)

2000-11-01

between the IAEA and ISO standards when applied in nuclear installations, and to support the practical way of fulfilling nuclear safety, the IAEA established a project for producing a guidance report. Valuable contributions from the European Atomic Forum (FORATOM) were committed and contractual arrangements made, with the target of finalizing the report in the shortest feasible timeframe commensurable with available resources. The International Atomic Energy Agency (IAEA) Code and Safety Guides contained in the Safety Series No. 50-C/SG-Q define basic quality assurance requirements, which must be considered to ensure safety, and provides recommendations on how to fulfill these basic requirements. The IAEA 50-C/SG-Q standard reflects the performance based approach to quality assurance covering all aspects of plant safety, economics and efficiency. The IAEA requirements and recommendations are generally used at the nuclear utility-regulator interface. The International Organization for Standardization (ISO) International Standard ISO 9001:1994 specifies quality system requirements for use where any supplier's capability to design and supply a conforming product needs to be demonstrated. The requirements specified are aimed primarily at achieving customer satisfaction by preventing nonconformity at all stages from design through to servicing. The ISO 9001:1994 standard is sometimes used at the nuclear utility-supplier interface. The objective of this report is to compare the requirements of IAEA 50-C/SG-Q (1996) with ISO 9001:1994 in order to identify the main differences and additional requirements contained within. The report also provides information and guidance, which may be considered when ISO 9001:1994 is utilized by the nuclear industry

Requirements and standards facilitating quality improvement for reporting systems in gastrointestinal endoscopy: European Society of Gastrointestinal Endoscopy (ESGE) Position Statement

NARCIS (Netherlands)

Bretthauer, Michael; Aabakken, Lars; Dekker, Evelien; Kaminski, Michal F.; Rösch, Thomas; Hultcrantz, Rolf; Suchanek, Stepan; Jover, Rodrigo; Kuipers, Ernst J.; Bisschops, Raf; Spada, Cristiano; Valori, Roland; Domagk, Dirk; Rees, Colin; Rutter, Matthew D.

2016-01-01

To develop standards for high quality in gastrointestinal (GI) endoscopy, the European Society of Gastrointestinal Endoscopy (ESGE) has established the ESGE Quality Improvement Committee. A prerequisite for quality assurance and improvement for all GI endoscopy procedures is state-of-the-art

DOE standard: Quality assurance inspection and testing of HEPA filters

International Nuclear Information System (INIS)

1999-02-01

This standard establishes essential elements for the quality assurance inspection and testing of HEPA filters by US Department of Energy (DOE)-accepted Filter Test Facilities (FTF). The standard specifies HEPA filter quality assurance inspection and testing practices established in DOE-STD-3022-98, DOE HEPA Filter Test Program, and provides a basis for the preparation of written operating procedures for primary FTF functions

The study of surgical image quality evaluation system by subjective quality factor method

Science.gov (United States)

Zhang, Jian J.; Xuan, Jason R.; Yang, Xirong; Yu, Honggang; Koullick, Edouard

2016-03-01

GreenLightTM procedure is an effective and economical way of treatment of benign prostate hyperplasia (BPH); there are almost a million of patients treated with GreenLightTM worldwide. During the surgical procedure, the surgeon or physician will rely on the monitoring video system to survey and confirm the surgical progress. There are a few obstructions that could greatly affect the image quality of the monitoring video, like laser glare by the tissue and body fluid, air bubbles and debris generated by tissue evaporation, and bleeding, just to name a few. In order to improve the physician's visual experience of a laser surgical procedure, the system performance parameter related to image quality needs to be well defined. However, since image quality is the integrated set of perceptions of the overall degree of excellence of an image, or in other words, image quality is the perceptually weighted combination of significant attributes (contrast, graininess …) of an image when considered in its marketplace or application, there is no standard definition on overall image or video quality especially for the no-reference case (without a standard chart as reference). In this study, Subjective Quality Factor (SQF) and acutance are used for no-reference image quality evaluation. Basic image quality parameters, like sharpness, color accuracy, size of obstruction and transmission of obstruction, are used as subparameter to define the rating scale for image quality evaluation or comparison. Sample image groups were evaluated by human observers according to the rating scale. Surveys of physician groups were also conducted with lab generated sample videos. The study shows that human subjective perception is a trustworthy way of image quality evaluation. More systematic investigation on the relationship between video quality and image quality of each frame will be conducted as a future study.

The Nencki Affective Picture System (NAPS): introduction to a novel, standardized, wide-range, high-quality, realistic picture database.

Science.gov (United States)

Marchewka, Artur; Zurawski, Łukasz; Jednoróg, Katarzyna; Grabowska, Anna

2014-06-01

Selecting appropriate stimuli to induce emotional states is essential in affective research. Only a few standardized affective stimulus databases have been created for auditory, language, and visual materials. Numerous studies have extensively employed these databases using both behavioral and neuroimaging methods. However, some limitations of the existing databases have recently been reported, including limited numbers of stimuli in specific categories or poor picture quality of the visual stimuli. In the present article, we introduce the Nencki Affective Picture System (NAPS), which consists of 1,356 realistic, high-quality photographs that are divided into five categories (people, faces, animals, objects, and landscapes). Affective ratings were collected from 204 mostly European participants. The pictures were rated according to the valence, arousal, and approach-avoidance dimensions using computerized bipolar semantic slider scales. Normative ratings for the categories are presented for each dimension. Validation of the ratings was obtained by comparing them to ratings generated using the Self-Assessment Manikin and the International Affective Picture System. In addition, the physical properties of the photographs are reported, including luminance, contrast, and entropy. The new database, with accompanying ratings and image parameters, allows researchers to select a variety of visual stimulus materials specific to their experimental questions of interest. The NAPS system is freely accessible to the scientific community for noncommercial use by request at http://naps.nencki.gov.pl .

Quality of life and educational benefit among orthopedic surgery residents: a prospective, multicentre comparison of the night float and the standard call systems.

Science.gov (United States)

Zahrai, Ali; Chahal, Jaskarndip; Stojimirovic, Dan; Schemitsch, Emil H; Yee, Albert; Kraemer, William

2011-02-01

Given recent evolving guidelines regarding postcall clinical relief of residents and emphasis on quality of life, novel strategies are required for implementing call schedules. The night float system has been used by some institutions as a strategy to decrease the burden of call on resident quality of life in level-1 trauma centres. The purpose of this study was to determine whether there are differences in quality of life, work-related stressors and educational experience between orthopedic surgery residents in the night float and standard call systems at 2 level-1 trauma centres. We conducted a prospective cohort study at 2 level-1 trauma hospitals comprising a standard call (1 night in 4) group and a night float (5 14-hour shifts [5 pm-7 am] from Monday to Friday) group for each hospital. Over the course of a 6-month rotation, each resident completed 3 weeks of night float. The remainder of the time on the trauma service consists of clinical duties from 6:30 am to 5:30 pm on a daily basis and intermittent coverage of weekend call only. Residents completed the Short Form-36 (SF-36) general quality-of-life questionnaire, as well as questionnaires on stress level and educational experience before the rotation (baseline) and at 2, 4 and 6 months. We performed an analysis of covariance to compare between-group differences using the baseline scores as covariates and Wilcoxon signed-rank tests (nonparametric) to determine if the residents' SF-36 scores were different from the age- and sex-matched Canadian norms. We analyzed predictors of resident quality of life using multivariable mixed models. Seven residents were in the standard call group and 9 in the night float group, for a total of 16 residents (all men, mean age 35.1 yr). Controlling for between-group differences at baseline, residents on the night float rotation had significantly lower role physical, bodily pain, social function and physical component scale scores over the 6-month observation period. Compared

European quality system for tissue banking.

Science.gov (United States)

Manyalich, M; Navarro, A; Koller, J; Loty, B; de Guerra, A; Cornu, O; Vabels, G; Fornasari, P M; Costa, A N; Siska, I; Hirn, M; Franz, N; Miranda, B; Kaminski, A; Uhrynowska, I; Van Baare, J; Trias, E; Fernández, C; de By, T; Poniatowski, S; Carbonell, R

2009-01-01

The aims of this project were to analyze the factors that influence quality and safety of tissues for transplantation and to develop the method to ensure standards of quality and safety in relation to tissue banking as demanded by European Directive 2004/23/EC and its technical annexes. It is organized in 4 Working Groups, the objectives of each one being focused in a specific area. The Guide of Recommendations for Tissue Banking is structured into 4 parts: (1) quality systems that apply to tissue banking and general quality system requirements, (2) regulatory framework in Europe, (3) standards available, and (4) recommendations of the fundamental quality and safety keypoints. This Working Group handled design of a multinational musculoskeletal tissue registry prototype. This Working Group handled design and validation of a specialized training model structured into online and face-to-face courses. The model was improved with suggestions from students, and 100% certification was obtained. The Guide for Auditing Tissue Establishments provides guidance for auditors, a self-assessment questionnaire, and an audit report form. The effectiveness and sustainability of the outputs were assessed. Both guides are useful for experienced tissue establishments and auditors and also for professionals that are starting in the field. The registry prototype proves it is possible to exchange tissues between establishments throughout Europe. The training model has been effective in educating staff and means having professionals with excellent expertise. Member states could adapt/adopt it. The guides should be updated periodically and perhaps a European organization should take responsibility for this and even create a body of auditors.

Applying policy and health effects of air pollution in South Korea: focus on ambient air quality standards

Science.gov (United States)

Ha, Jongsik

2014-01-01

Objectives South Korea’s air quality standards are insufficient in terms of establishing a procedure for their management. The current system lacks a proper decision-making process and prior evidence is not considered. The purpose of this study is to propose a measure for establishing atmospheric environmental standards in South Korea that will take into consideration the health of its residents. Methods In this paper, the National Ambient Air Quality Standards (NAAQS) of the US was examined in order to suggest ways, which consider health effects, to establish air quality standards in South Korea. Up-to-date research on the health effects of air pollution was then reviewed, and tools were proposed to utilize the key results. This was done in an effort to ensure the reliability of the standards with regard to public health. Results This study showed that scientific research on the health effects of air pollution and the methodology used in the research have contributed significantly to establishing air quality standards. However, as the standards are legally binding, the procedure should take into account the effects on other sectors. Realistically speaking, it is impossible to establish standards that protect an entire population from air pollution. Instead, it is necessary to find a balance between what should be done and what can be done. Conclusions Therefore, establishing air quality standards should be done as part of an evidence-based policy that identifies the health effects of air pollution and takes into consideration political, economic, and social contexts. PMID:25300297

Study on Quality Standard of Processed Curcuma Longa Radix

Directory of Open Access Journals (Sweden)

Zhimin Chen

2017-01-01

Full Text Available To control the quality of Curcuma Longa Radix by establishing quality standards, this paper increased the contents of extract and volatile oil determination. Meanwhile, the curcumin was selected as the internal marker, and the relative correlation factors (RCFs of demethoxycurcumin and bisdemethoxycurcumin were established by high performance liquid chromatography (HPLC. The contents of multicomponents were calculated based on their RCFs. The rationality and feasibility of the methods were evaluated by comparison of the quantitative results between external standard method (ESM and quantitative analysis of multicomponents by single-marker (QAMS. Ethanol extracts ranged from 9.749 to 15.644% and the mean value was 13.473%. The volatile oil ranged from 0.45 to 0.90 mL/100 g and the mean value was 0.66 mL/100 g. This method was accurate and feasible and could provide a reference for further comprehensive and effective control of the quality standard of Curcuma Longa Radix and its processed products.

Study on Quality Standard of Processed Curcuma Longa Radix

Science.gov (United States)

Zhao, Yongfeng; Quan, Liang; Zhou, Haiting; Cao, Dong; Li, Wenbing; Yang, Zhuo

2017-01-01

To control the quality of Curcuma Longa Radix by establishing quality standards, this paper increased the contents of extract and volatile oil determination. Meanwhile, the curcumin was selected as the internal marker, and the relative correlation factors (RCFs) of demethoxycurcumin and bisdemethoxycurcumin were established by high performance liquid chromatography (HPLC). The contents of multicomponents were calculated based on their RCFs. The rationality and feasibility of the methods were evaluated by comparison of the quantitative results between external standard method (ESM) and quantitative analysis of multicomponents by single-marker (QAMS). Ethanol extracts ranged from 9.749 to 15.644% and the mean value was 13.473%. The volatile oil ranged from 0.45 to 0.90 mL/100 g and the mean value was 0.66 mL/100 g. This method was accurate and feasible and could provide a reference for further comprehensive and effective control of the quality standard of Curcuma Longa Radix and its processed products. PMID:29375640

Standard Review Plan for Environmental Restoration Program Quality Management Plans

International Nuclear Information System (INIS)

1993-12-01

The Department of Energy, Richland Operations Office (RL) Manual Environmental Restoration Program Quality System Requirements (QSR) for the Hanford Site, defines all quality requirements governing Hanford Environmental Restoration (ER) Program activities. The QSR requires that ER Program participants develop Quality Management Plans (QMPs) that describe how the QSR requirements will be implemented for their assigned scopes of work. This standard review plan (SRP) describes the ER program participant responsibilities for submittal of QMPs to the RL Environmental Restoration Division for review and the RL methodology for performing the reviews of participant QMPS. The SRP serves the following functions: acts as a guide in the development or revision of QMPs to assure that the content is complete and adequate; acts as a checklist to be used by the RL staff in their review of participant QMPs; acts as an index or matrix between the requirements of the QSR and implementing methodologies described in the QMPs; decreases the time and subjectivity of document reviews; and provides a formal, documented method for describing exceptions, modifications, or waivers to established ER Program quality requirements

Fit for purpose quality management system for military forensic exploitation.

Science.gov (United States)

Wilson, Lauren Elizabeth; Gahan, Michelle Elizabeth; Robertson, James; Lennard, Chris

2018-03-01

In a previous publication we described a systems approach to forensic science applied in the military domain. The forensic science 'system of systems' describes forensic science as a sub-system in the larger criminal justice, law enforcement, intelligence, and military systems, with quality management being an important supporting system. Quality management systems help to ensure that organisations achieve their objective and continually improve their capability. Components of forensic science quality management systems can include standardisation of processes, accreditation of facilities to national/international standards, and certification of personnel. A fit for purpose quality management system should be balanced to allow organisations to meet objectives, provide continuous improvement; mitigate risk; and impart a positive quality culture. Considerable attention over the last decades has been given to the need for forensic science quality management systems to meet criminal justice and law enforcement objectives. More recently, the need for the forensic quality management systems to meet forensic intelligence objectives has been considered. This paper, for the first time, discusses the need for a fit for purpose quality management system for military forensic exploitation. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

Search for adequate quality standards for neutron radiography of nuclear fuel

International Nuclear Information System (INIS)

Domanus, J.C.

1983-01-01

Unlike in other fields of industrial radiography, where standard methods and procedures are used to control the quality of the radiographic image, no such standard exists for neutron radiography of nuclear fuel. To fill that gap it was felt that standardization work ought to be started in that field, too. Accordingly in 1979 an Euratom Neutron Radiography Working Group was constituted, which initiated standardization work in the field of neutron radiography of nuclear fuel. Finding adequate standards for image quality of neutron radiographs and checking the accuracy of dimension measurements from them were given first priority. (Auth.)

Associations between nutritional quality of meals and snacks assessed by the Food Standards Agency nutrient profiling system and overall diet quality and adiposity measures in British children and adolescents.

Science.gov (United States)

Murakami, Kentaro

2018-05-01

This cross-sectional study examined how the nutritional quality of meals and snacks was associated with overall diet quality and adiposity measures. Based on 7-d weighed dietary record data, all eating occasions were divided into meals or snacks based on time (meals: 06:00-09:00 h, 12:00-14:00 h, and 17:00-20:00 h; snacks: others) or contribution to energy intake (meals: ≥15%; snacks: quality of meals and snacks was assessed as the arithmetical energy intake-weighted means of the Food Standards Agency (FSA) nutrient profiling system score of each food and beverage consumed, based on the contents of energy, saturated fatty acid, total sugar, sodium, fruits/vegetables/nuts, dietary fiber, and protein. Regardless of the definition of meals and snacks, higher FSA score (lower nutritional quality) of meals was inversely associated with overall diet quality assessed by the Mediterranean diet score in both children and adolescents (P quality of meals, but not snacks, assessed by the FSA score was associated with lower overall diet quality, whereas no consistent associations were observed with regard to adiposity measures. Copyright © 2017 Elsevier Inc. All rights reserved.

[Implementation of the technical requirements of the UNE-EN-ISO 15189 quality standard in a mycobacterial laboratory].

Science.gov (United States)

Guna Serrano, M del Remedio; Ocete Mochón, M Dolores; Lahiguera, M José; Bresó, M Carmen; Gimeno Cardona, Concepción

2013-02-01

The UNE-EN-ISO 15189:2007 standard defines the requirements for quality and competence that must be met by medical laboratories. These laboratories should use this international standard to develop their own quality management systems and to evaluate their own competencies; in turn, this standard will be used by accreditation bodies to confirm or recognize the laboratories' competence. In clinical microbiology laboratories, application of the standard implies the implementation of the technical and specific management requirements that must be met to achieve optimal quality when carrying out microbiological tests. In Spain, accreditation is granted by the Spanish Accreditation Body (Entidad Nacional de Acreditación). This review aims to discuss the practical application of the standard's technical requirements in mycobacterial laboratory. Firstly, we define the scope of accreditation. Secondly, we specify how the items of the standard on personnel management, control of equipment, environmental facilities, method validation, internal controls and customer satisfaction surveys were developed and implemented in our laboratory. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Medical laboratories in sub-Saharan Africa that meet international quality standards.

Science.gov (United States)

Schroeder, Lee F; Amukele, Timothy

2014-06-01

A recent survey of laboratories in Kampala, Uganda, demonstrated that only 0.3% of laboratories (3/954) met international quality standards. To benchmark laboratory quality throughout the rest of sub-Saharan Africa (SSA), we compiled a list of SSA laboratories meeting international quality standards. Accrediting bodies were queried via online registries or direct communication in May 2013. There were 380 laboratories accredited to international standards in SSA. Ninety-one percent were in South Africa. Thirty-seven of 49 countries had no laboratories accredited to international quality standards. Accredited laboratory density (per million people) in South Africa, Namibia, and Botswana were similar to those in many European countries. Single variable linear regression showed a correlation between accredited laboratory density and health expenditures per person (adjusted R(2) = 0.81, P clinical laboratory. For those that do, there is a strong correlation between country-specific accredited laboratory density and per-capita health expenditures. Copyright© by the American Society for Clinical Pathology.

Benefits of implementation of ISO 9001 Quality System in the health sector

OpenAIRE

Petkovska, Sofija; Gjorgjeska, Biljana

2012-01-01

Quality Standard ISO 9001 helps and enables organizations, regardless of the sector they exist in, to implement the quality management properly. Recent years have attracted attention to the possibilities of implementing this standard in the health sector and the economic viability of that long-term investment. Healthcare organizations are recognizing the value system that combines all the criteria for managing quality, including management of business, compliance and management of procedural ...

Quality Management System Improves Effectiveness and Quality of Activities of Radiation Protection Regulatory Body in Lithuania

International Nuclear Information System (INIS)

Mastauskas, A.

2016-01-01

Processes of creation of quality management system (QMS) in regulatory body in radiation protection field – Radiation Protection Centre (RPC) and the benefit of this system to ensure the quality of the performance of functions are described. RPC QMS compliant with ISO 9001:2008 standard and in line with the requirements of the IAEA GSR- 3 document. It allowed achieving a new quality of works carried out by RPC. Because creation and introduction of the QMS is a continuous process, the QMS of RPC is continually renewed and new procedures are developed.

Quality education as quality system support

International Nuclear Information System (INIS)

Crnoshia, L.; Gavriloska, M.; Denkovska, J.; Dimitrovski, A.

1999-01-01

Within the last ten years we are witnesses of the political and economical system transformation, that imposed the need for changing the way of thinking and work planning. The quality has become the imperative of working and a precondition for survival in the market. Solving the quality problems seeks planned and systematic approach that supposed appropriate personnel with adequate knowledge in the field of quality management and implementation of the quality system. Having in mind the need for documented quality system and quality management OKTA, has already started with personnel educational process for quality as a precondition for successful establishment of quality system. In this paper we present quality education approach and manner of its realization in OKTA Crude Oil Refinery - Skopje, Macedonia. (Original)

Quality of Tourism and Hospitality Management Systems in Russia

Directory of Open Access Journals (Sweden)

Irina N. Markaryan

2013-01-01

Full Text Available This article describes the features of quality standards (ISO, their application in Russia, analyzes Quality Awards, awarded to Russian producers, such as the Award of the Government of the Russian Federation in the field of Quality, National Tourism Award named after Yu. Senkevich, Travel Award «Golden Meridian», Moscow “Guiding Star” Award. The objectives of management system for Sochi resorts and hotels were determined

Bread-Making Quality of Standard Winter Wheat Cultivars

OpenAIRE

Ćurić, Duška; Novotni, Dubravka; Bauman, Ingrid; Krička, Tajana; Jukić, Željko; Voća, Neven; Kiš, Darko

2009-01-01

The purpose of this study was to define an impact of the cultivar, year and cultivation area of the standard Croatian winter wheat on the bread-making quality. The bread-making quality of cultivars ‘Divana’, ‘Žitarka’ and ‘Sana’ from the crop years 1998, 2000, 2002, 2004 and 2006, and from Zagreb and Osijek location was analyzed. Wheat from the cultivar tests cultivated under the same agro technological conditions was used for this testing. The tested winter wheat bread-making quality primari...

Information systems as a quality management tool in clinical laboratories

Science.gov (United States)

Schmitz, Vanessa; Rosecler Bez el Boukhari, Marta

2007-11-01

This article describes information systems as a quality management tool in clinical laboratories. The quality of laboratory analyses is of fundamental importance for health professionals in aiding appropriate diagnosis and treatment. Information systems allow the automation of internal quality management processes, using standard sample tests, Levey-Jennings charts and Westgard multirule analysis. This simplifies evaluation and interpretation of quality tests and reduces the possibility of human error. This study proposes the development of an information system with appropriate functions and costs for the automation of internal quality control in small and medium-sized clinical laboratories. To this end, it evaluates the functions and usability of two commercial software products designed for this purpose, identifying the positive features of each, so that these can be taken into account during the development of the proposed system.

Information systems as a quality management tool in clinical laboratories

International Nuclear Information System (INIS)

Schmitz, Vanessa; Boukhari, Marta Rosecler Bez el

2007-01-01

This article describes information systems as a quality management tool in clinical laboratories. The quality of laboratory analyses is of fundamental importance for health professionals in aiding appropriate diagnosis and treatment. Information systems allow the automation of internal quality management processes, using standard sample tests, Levey-Jennings charts and Westgard multirule analysis. This simplifies evaluation and interpretation of quality tests and reduces the possibility of human error. This study proposes the development of an information system with appropriate functions and costs for the automation of internal quality control in small and medium-sized clinical laboratories. To this end, it evaluates the functions and usability of two commercial software products designed for this purpose, identifying the positive features of each, so that these can be taken into account during the development of the proposed system

IAEA Safety Standards on Management Systems and Safety Culture

International Nuclear Information System (INIS)

Persson, Kerstin Dahlgren

2007-01-01

The IAEA has developed a new set of Safety Standard for applying an integrated Management System for facilities and activities. The objective of the new Safety Standards is to define requirements and provide guidance for establishing, implementing, assessing and continually improving a Management System that integrates safety, health, environmental, security, quality and economic related elements to ensure that safety is properly taken into account in all the activities of an organization. With an integrated approach to management system it is also necessary to include the aspect of culture, where the organizational culture and safety culture is seen as crucial elements of the successful implementation of this management system and the attainment of all the goals and particularly the safety goals of the organization. The IAEA has developed a set of service aimed at assisting it's Member States in establishing. Implementing, assessing and continually improving an integrated management system. (author)

Theoretical and Practical Aspects of Logistic Quality Management System Documentation Development Process

Directory of Open Access Journals (Sweden)

Linas Šaulinskas

2013-12-01

Full Text Available This paper addresses aspects of logistics quality management system documentation development and suggests models for quality management system documentation development, documentation hierarchical systems and authorization approval. It also identifies logistic processes and a responsibilities model and a detailed document development and approval process that can be practically applied. Our results are based upon an analysis of advanced Lithuanian and foreign corporate business practices, a review of current literature and recommendations for quality management system standards.

"Power quality system," a new system of quality management for globalization: towards innovation and competitive advantages.

Science.gov (United States)

Abdul-Rahman, H; Berawi, M A

Knowledge Management (KM) addresses the critical issues of organizational adoption, survival and competence in the face of an increasingly changing environment. KM embodies organizational processes that seek a synergistic combination of the data and information processing capabilities of information and communication technologies (ICT), and the creative and innovative capacity of human beings to improve ICT In that role, knowledge management will improve quality management and avoid or minimize losses and weakness that usually come from poor performance as well as increase the competitive level of the company and its ability to survive in the global marketplace. To achieve quality, all parties including the clients, company consultants, contractors, entrepreneurs, suppliers, and the governing bodies (i.e., all involved stake-holders) need to collaborate and commit to achieving quality. The design based organizations in major business and construction companies have to be quality driven to support healthy growth in today's competitive market. In the march towards vision 2020 and globalization (i.e., the one world community) of many companies, their design based organizations need to have superior quality management and knowledge management to anticipate changes. The implementation of a quality system such as the ISO 9000 Standards, Total Quality Management, or Quality Function Deployment (QFD) focuses the company's resources towards achieving faster and better results in the global market with less cost. To anticipate the needs of the marketplace and clients as the world and technology change, a new system, which we call Power Quality System (PQS), has been designed. PQS is a combination of information and communication technologies (ICT) and the creative and innovative capacity of human beings to meet the challenges of the new world business and to develop high quality products.

Evaluating spoken dialogue systems according to de-facto standards: A case study

NARCIS (Netherlands)

Möller, S.; Smeele, P.; Boland, H.; Krebber, J.

2007-01-01

In the present paper, we investigate the validity and reliability of de-facto evaluation standards, defined for measuring or predicting the quality of the interaction with spoken dialogue systems. Two experiments have been carried out with a dialogue system for controlling domestic devices. During

ANALYSIS OF THE EFFICIENCY OF APPLYING THE QUALITY MANAGEMENT SYSTEM IN INDUSTRIAL ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Andrei DIAMANDESCU

2017-05-01

Full Text Available In this article we propose to illustrate the methodology of measuring and assessing the impact of quality systems on the performance of industrial businesses. If in terms of the total quality management system – TQM, the impact may be measured by comparing the business performance with a reference standard (for instance ISO 9001, which records the difference compared to the performance prior to implementing the TQM, or, on rarer occasions, by optimizing the costs of quality with the help of econometric models, for the integrated quality improvement system, comprising of the TQM system based on the ISO standards and the Kaizen management system, which we propose and assess within this article, the efficiency/performance will be measured through a methodology based on analyzing the evolution of financial indicators for business performance. This approach was implemented as a result of findings from the businesses where we have been provided with documentation, and where the calculation and assessment of quality system operation efficiency by optimizing costs using the classic or improved econometric models is not approved by the management.

[Development and Current Status of Quality Management Systems for Specimen Examination].

Science.gov (United States)

Kanemura, Shigeru

2015-07-01

ISO 15189:2003 was published as an International Standard in 2003 by Technical Committee ISO/TC212 of the International Organization for Standardization (ISO). This international standard based on ISO 9001 specifies requirements for competence and quality that are specific to medical laboratories. With the publication of this standard, we will have to markedly change our concept. We have to adopt methods to manage the causes of errors in measurement processes rather than methods to manage only the results of measurements. The new concept of the Quality Management System (QMS) which manages the result of measurements is summarized. With the publication of ISO 15189, the definition of the quality assurance of examination results became clearer and stricter. This report describes the contents of ISO 15189 and the method of enforcing it.

Minimum quality standards and international trade

DEFF Research Database (Denmark)

Baltzer, Kenneth Thomas

2011-01-01

This paper investigates the impact of a non-discriminating minimum quality standard (MQS) on trade and welfare when the market is characterized by imperfect competition and asymmetric information. A simple partial equilibrium model of an international Cournot duopoly is presented in which a domes...... prefer different levels of regulation. As a result, international trade disputes are likely to arise even when regulation is non-discriminating....

Application of principles of quality assurance recommended by ISO 9000 Standards to Regulatory Program

International Nuclear Information System (INIS)

Jova Sed, Luis Andres; Bilbao Alfonso, Alejandro Victor

2001-01-01

For several years, the necessity of applying the programs of quality assurance to the radiation protection activities has been highlighted; however there has been little progress in this direction, even in the philosophical and methodological development of the topic. The objective of this work is to transmit some recommendations of how the Regulatory Authorities of developing countries can organize the quality assurance system of their own activity, following the main precepts of the international standard series ISO 9000. In very tight synthesis it describes the importance that has the definition of a policy of quality for a Regulatory Authority, the quality objectives, the definition of the responsibilities and attributions in relation with quality assurance, and others elements of the ISO 9000, and how to apply it. (author)

Safety implications of standardized continuous quality improvement programs in community pharmacy.

Science.gov (United States)

Boyle, Todd A; Ho, Certina; Mackinnon, Neil J; Mahaffey, Thomas; Taylor, Jeffrey M

2013-06-01

Standardized continuous quality improvement (CQI) programs combine Web-based technologies and standardized improvement processes, tools, and expectations to enable quality-related events (QREs) occurring in individual pharmacies to be shared with pharmacies in other jurisdictions. Because standardized CQI programs are still new to community pharmacy, little is known about how they impact medication safety. This research identifies key aspects of medication safety that change as a result of implementing a standardized CQI program. Fifty-three community pharmacies in Nova Scotia, Canada, adopted the SafetyNET-Rx standardized CQI program in April 2010. The Institute for Safe Medication Practices (ISMP) Canada's Medication Safety Self-Assessment (MSSA) survey was administered to these pharmacies before and 1 year into their use of the SafetyNET-Rx program. The nonparametric Wilcoxon signed-rank test was used to explore where changes in patient safety occurred as a result of SafetyNETRx use. Significant improvements occurred with quality processes and risk management, staff competence, and education, and communication of drug orders and other information. Patient education, environmental factors, and the use of devices did not show statistically significant changes. As CQI programs are designed to share learning from QREs, it is reassuring to see that the largest improvements are related to quality processes, risk management, staff competence, and education.

PROPOSAL METHODOLOGY OF THE SUBSYSTEM - INTERNAL STANDARDIZATION AS PART OF TQM SYSTEM

Directory of Open Access Journals (Sweden)

Elizabeta Mitreva

2012-09-01

Full Text Available Standardization in the management system becomes a key task of the managers and a priority issue for survival of every organization of this century. Besides the company's owner which is mostly concerned with the profit and fast multiplication of its invested capital, many other parties such as consumers, community, employees, deliverers and the society make a pressure in demanding. As of those demands the organization is to adapt its management system according the standards in order to be safe t hat the expectations will be fulfilled. However, to fulfill the standards in Europe and worldwide it is necessary to approach towards huge - radical changes in problem solving i.e. reengineering, new manner of consideration of causes and not as the so far known way - thinking over the consequences. Implementing this new TQM strategy means designing solidly documented quality system that covers every working process in a company and appears as a necessary base for successful usage of statistical process contr ol (SPC and efficient teamwork which otherwise in case of bad quality system will not be able to be set. In this manner it is guaranteed that the attitude of the top management is conducted; this attitude is consisted within the quality policy that create s a climate and information base whe re team work can be developed. This paper offers a proposal methodology for designing and implementation of internal standardization of TQM system in companies. This methodology is applicable in factory for reconstructio n of wagons and in a factory for confectionary production and has shown its efficiency and usage. In order to design the processes in line with the consumers/ clients content and at the same time to achieve profitability, it is necessary to reengineer the working processes

[Recommendations for implementing the quality policy and organisation of a quality management system].

Science.gov (United States)

Daunizeau, A

2013-06-01

Preliminary issues to implement a quality management system are described. They include the definition of the structure, a hierarchical and functional organization chart and the engagement of the whole personnel to apply the requirements of the standard EN ISO 15189. The policy has to be translated into objectives.

Standard setting and quality of assessment: A conceptual approach ...

African Journals Online (AJOL)

Quality performance standards and the effect of assessment outcomes are important in the educational milieu, as assessment remains the representative ... not be seen as a methodological process of setting pass/fail cut-off points only, but as a powerful catalyst for quality improvements in HPE by promoting excellence in ...

Implementing of Quality management system (ISO 9000) in Radiotherapic Oncologycal Service

International Nuclear Information System (INIS)

Quarneti, A.; Castaño, A.; De Rosa, A.; Pintado, D.; Luongo Gardi, A.; Dalla Rosa, M.; Guerrero, L.; Luongo, M.; Luongo Céspedes, A.; Marchese, E.; Torres, M.; Di Mauro, J.; Payse, M.; Lorenzo, M.; Cortés, A.; Battagliotti, R.; Satragno, N.; García, I.; Gonsalves, D.; Gonzalez, J.; Ricagni, L.; Benausse, M.; Dama Volunt; Ferreiro, M.

2004-01-01

Objective: To show the progress and difficulties in the process of implementing a quality management system(QMS) according to the technical standard UNIT-ISO 9001-2000. Material and methods: The system is being implemented in Oncology Radiation of Dpt. Of Clinical Oncology, Hospital de Clínicas, Montevideo, and certification thereof shall be made by the Uruguayan Institute of Technical Standards (UNIT). The working group consists of: medical teachers, post-graduate, radiotherapy technicians,physical assistant, nurse, secretary, general service and pink ladies,besides teachers and interns UNIT. A systems approach to quality management in stages is applied and focused on the 8 quality principles: The commitment of senior management who drafted the quality policy was established. A committee and a coordinator of quality, service three doctors appointed are concurring specialist courses in quality management in health institutions dictated by UNIT. Patient surveys, officers and staff awareness talks were conducted. It is developing the mission, vision, objectives of quality and Quality Manual. Key processes, support and work procedures were determined. Presented some obstacles, mainly resistance to change. Conclusions: The implementation of a QMS is a valuable tool that tends to continuous quality improvement, increase patient satisfaction and service members, the performance of the organization and its processes, but is difficult due to instrumentation resistance to the changes observed in our service

Standardization of tests of quality control with the aid of quality tools used in management systems of processes at the Sector of Nuclear Medicine of the University Hospital of Santa Maria, Rio Grande do Sul

International Nuclear Information System (INIS)

Da Cas, E.V.; Weis, G.L.; Bahunhardt, T.; Shuch, L.A.; Lopes, L.F.D.

2009-01-01

This work tries to standardize the tests of quality control at the Sector of Nuclear Medicine at the University Hospital of Santa Maria, using tools of the quality used in systems of management of processes such as, PDCA, brainstorming, diagram of cause and effect (Ishikawa), 5W2H, verifying list and fluxogram. The tests of quality control refer to the scintillation camera (center of rotation, intrinsic uniformity, intrinsic spatial resolution and linearity, energy resolution for each radionuclide), to the dose calibrator (accuracy, reproducibility and linearity), to the Geiger-Mueller detector (reproducibility of the detector). (author)

Secondary standard dosimetry system with automatic dose/rate calculation

International Nuclear Information System (INIS)

Duftschmid, K.E.; Bernhart, J.; Stehno, G.; Klosch, W.

1980-01-01

A versatile and automated secondary standard instrument has been designed for quick and accurate dose/rate measurement in a wide range of radiation intensity and quality (between 1 μR and 100 kR; 0.2 nC/kg - 20C/kg) for protection and therapy level dosimetry. The system is based on a series of secondary standard ionization chambers connected to a precision digital current integrator with microprocessor circuitry for data evaluation and control. Input of measurement parameters and calibration factors stored in an exchangeable memory chip provide computation of dose/rate values in the desired units. The ionization chambers provide excellent long-term stability and energy response and can be used with internal check sources to test validity of calibration. The system is a useful tool particularly for daily measurements in a secondary standard dosimetry laboratory or radiation therapy center. (H.K.)

Standard review plan for dry cask storage systems. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 {open_quotes}Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Cask{close_quotes} contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed.

Standard review plan for dry cask storage systems. Final report

International Nuclear Information System (INIS)

1997-01-01

The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 open-quotes Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Caskclose quotes contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed

QUALITY ASSURANCE SYSTEMS IN POLISH AND UKRAINIAN HIGHER EDUCATION. A COMPARATIVE ANALYSIS

Directory of Open Access Journals (Sweden)

Marta Tutko

2015-02-01

Full Text Available The article deals with the progress made to develop external and internal quality assurance systems in Polish and Ukrainian higher education in the European Higher Education Area background. The focus of the paper is on the extent to which quality assurance systems in these countries are following the Standards and Guidelines for Quality Assurance in the European Higher Education Area. Furthermore, internal and external quality assur-ance in the European context is presented in the article. The authors of the article also conducted a comparative analysis of quality assurance systems in Polish and Ukrainian higher education.

Using ISO 25040 standard for evaluating electronic health record systems.

Science.gov (United States)

Oliveira, Marília; Novaes, Magdala; Vasconcelos, Alexandre

2013-01-01

Quality of electronic health record systems (EHR-S) is one of the key points in the discussion about the safe use of this kind of system. It stimulates creation of technical standards and certifications in order to establish the minimum requirements expected for these systems. [1] In other side, EHR-S suppliers need to invest in evaluation of their products to provide systems according to these requirements. This work presents a proposal of use ISO 25040 standard, which focuses on the evaluation of software products, for define a model of evaluation of EHR-S in relation to Brazilian Certification for Electronic Health Record Systems - SBIS-CFM Certification. Proposal instantiates the process described in ISO 25040 standard using the set of requirements that is scope of the Brazilian certification. As first results, this research has produced an evaluation model and a scale for classify an EHR-S about its compliance level in relation to certification. This work in progress is part for the acquisition of the degree of master in Computer Science at the Federal University of Pernambuco.

Impact of model uncertainty on soil quality standards for cadmium in rice paddy fields

International Nuclear Information System (INIS)

Roemkens, P.F.A.M.; Brus, D.J.; Guo, H.Y.; Chu, C.L.; Chiang, C.M.; Koopmans, G.F.

2011-01-01

At present, soil quality standards used for agriculture do not consider the influence of pH and CEC on the uptake of pollutants by crops. A database with 750 selected paired samples of cadmium (Cd) in soil and paddy rice was used to calibrate soil to plant transfer models using the soil metal content, pH, and CEC or soil Cd and Zn extracted by 0.01 M CaCl 2 as explanatory variables. The models were validated against a set of 2300 data points not used in the calibration. These models were then used inversely to derive soil quality standards for Japonica and Indica rice cultivars based on the food quality standards for rice. To account for model uncertainty, strict soil quality standards were derived considering a maximum probability that rice exceeds the food quality standard equal to 10 or 5%. Model derived soil standards based on Aqua Regia ranged from less than 0.3 mg kg -1 for Indica at pH 4.5 to more than 6 mg kg -1 for Japonica-type cultivars in clay soils at pH 7. Based on the CaCl 2 extract, standards ranged from 0.03 mg kg -1 Cd for Indica cultivars to 0.1 mg kg -1 Cd for Japonica cultivars. For both Japonica and Indica-type cultivars, the soil quality standards must be reduced by a factor of 2 to 3 to obtain the strict standards. The strong impact of pH and CEC on soil quality standards implies that it is essential to correct for soil type when deriving national or local standards. Validation on the remaining 2300 samples indicated that both types of models were able to accurately predict (> 92%) whether rice grown on a specific soil will meet the food quality standard used in Taiwan. - Research highlights: → Cadmium uptake by Japonica and Indica rice varieties depends on soil pH and CEC. → Food safety based soil standards range from 0.3 (Indica) to 6 mg kg -1 (Japonica). → Model uncertainty leads to strict soil standards of less than 0.1 mg kg -1 for Indica. → Soil pH and CEC should be considered to obtain meaningful standards for agriculture.

Evaluation of the New DIN Standard for Quality Assurance of Diagnostic Displays - Technical Review DIN 6868-157.

Science.gov (United States)

Entz, Kathrin; Sommer, Alexander; Lenzen, Horst

2018-01-01

Acceptance and regular constancy tests are necessary to ensure the quality of diagnostic displays. In November 2014, a new standard (DIN 6868-157) was published which defines the test procedure and limiting values. There are several substantial changes compared with the previous standard DIN V 6868-57, i. e. considering the complete image display system including workstation and application software instead of only the displays. Since its publication, the new standard has raised many questions. This technical review aims to show the strengths and weaknesses of the new standard. Positive aspects are the introduction of a limiting value for the illuminance and the extension of the interval for constancy tests from 3 to 6 six months. The daily constancy test on the other hand, raises several problems and should be replaced by a randomized test. Additionally, the medical relevance is critically questioned and an overview of software for the quality assurance will be given.   · Acceptance and constancy tests for diagnostic displays are defined in DIN 6868-157.. · The new standards has positive and negative aspects.. · Randomized tests should be introduced.. · Entz K, Sommer A, Lenzen H. DIN 6868-157: Image Quality Assurance in Diagnostic X-ray Departments - X-ray Ordinance Acceptance and Constancy Test of Image Display Systems in their Environment - Technical Review -. Fortschr Röntgenstr 2018; 190: 51 - 60. © Georg Thieme Verlag KG Stuttgart · New York.

Standard Guide for Specifying Thermal Performance of Geothermal Power Systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2000-01-01

1.1 This guide covers power plant performance terms and criteria for use in evaluation and comparison of geothermal energy conversion and power generation systems. The special nature of these geothermal systems makes performance criteria commonly used to evaluate conventional fossil fuel-fired systems of limited value. This guide identifies the limitations of the less useful criteria and defines an equitable basis for measuring the quality of differing thermal cycles and plant equipment for geothermal resources. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Implementation of a quality management system according to 9001 standard in a hospital in the home unit: changes and achievements.

Science.gov (United States)

Rodríguez-Cerrillo, Matilde; Fernández-Diaz, Eddita; Iñurrieta-Romero, Amaia; Poza-Montoro, Ana

2012-01-01

The purpose of this paper is to describe changes and results obtained after implementation of a quality management system (QMS) according to ISO standards in a Hospital in the Home (HIH) Unit. The paper describes changes made and outcomes achieved. This took part in the HiH Unit, Clinico Hospital, Madrid, Spain, and looked at admissions, mean stay, patient satisfaction, adverse events, returns to hospital, no admitted referrals, complaints, compliance to protocols, equipment failures and resolution of urgent consultations. In June 2008, HiH Unit, Clinico Hospital obtained ISO certification. The main results achieved are as follows. There was an increase in patients' satisfaction--in June 2008, assessment of the quality of care provided by staff was scored at 4.7 (on a scale of 1 to 5); in 2010 it has been scored at 4.96. Patient satisfaction rate has increased from 92 percent to 98.8 percent. No complaints from patients were received. Unscheduled returns to hospital have decreased from 7 percent to 3 percent. There were no medical equipment failures. External suppliers' performance has improved. Material and medication needed by staff was available when necessary. The number of admissions has increased. Compliance to protocols has reached 97 percent. Inappropriate referrals have decreased by 8 percent. Six medications-related incidents were detected; in two cases the incident was not due to an error. In the other four cases error could have been detected before reaching the patient. Implementations of an ISO quality management system allow improved quality of care and patient satisfaction in a HIH Unit.

Software Quality Assurance and Controls Standard

Science.gov (United States)

2010-04-27

dassurance a wor pro uc s an processes comply with predefined provisions and plans. • According to International Standard (IS) 12207 – of the 44...from document (plan) focus to process focus – Alignment with framework standard IS 12207 software life cycle (SLC) processes with exact...Books and P blications IEEE Software and Systems Engineering curriculum ABET u Certified Software Development Professional Standards ISO /IEC

AUTOMATION OF THE SYSTEM OF INTERNAL LABORATORY QUALITY CONTROL

Directory of Open Access Journals (Sweden)

V. Z. Stetsyuk

2015-05-01

Full Text Available Quality control system base d on the principles of standardi zation of all phases of laboratory testing and analysis of internal laboratory quality control and external quality assessment. For the detection accuracy of the results of laboratory tests, carried out internally between the laboratory and laboratory quality control. Under internal laboratory quality control we understand measurement results of each analysis in each anal ytical series rendered directly in the lab every day. The purpose of internal laboratory control - identifying and eliminating unacceptable deviations from standard perfor mance test in the laboratory, i.e. identifying and eliminating harmful analytical errors. The solutions to these problems by implementing automated systems - software that allows you to optimize analytical laboratory research stage of the procedure by automatically creating process control charts was shown.

78 FR 58500 - Water Quality Standards Regulatory Clarifications Proposed Rule; Public Meeting and Public Webinars

Science.gov (United States)

2013-09-24

... the proposed rule ``Water Quality Standards Regulatory Clarifications,'' which was published... the federal water quality standards (WQS) regulation at 40 CFR Part 131 which helps implement the..., the proposed rule will lead to improved water quality standard development, implementation and...

Quality leadership skills Standards of Leadership Behavior

CERN Document Server

Leatherman, Richard W

2008-01-01

Would you like to really know how to empower employees to take greater charge over their careers? To teach employees how to take more responsibility for their performance appraisals? To delegate work to employees? You'll get clear direction in Quality Leadership - a practical manual that addresses today's need for quality performance and gives techniques for handling a wide array of employee problems. This how-to-do-it resource for new and future leaders explains basic leadership tasks in a simple, step-by-step manner. It is full of practical advice - not theories - and outlines clear standard

Strengthening the regulatory system through the implementation and use of a quality management system

Directory of Open Access Journals (Sweden)

Reinhold Eisner

2017-04-01

Full Text Available ABSTRACT Quality management systems (QMS, based on ISO 9001 requirements, are applicable to government service organizations such as Health Canada’s Biologics and Genetic Therapies Directorate (BGTD. This communication presents the process that the BGTD followed since the early 2000s to implement a quality management system and describes how the regulatory system was improved as a result of this project. BGTD undertook the implementation of a quality management system based on ISO 9001 and containing aspects of ISO 17025 with the goal of strengthening the regulatory system through improvements in the people, processes, and services of the organization. We discuss the strategy used by BGTD to implement the QMS and the benefits that were realized from the various stages of implementation. The eight quality principals upon which the QMS standards of the ISO 9000 series are based were used by senior management as a framework to guide QMS implementation.

Control system architecture: The standard and non-standard models

International Nuclear Information System (INIS)

Thuot, M.E.; Dalesio, L.R.

1993-01-01

Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a ''standard model''. The ''standard model'' consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the ''standard model'' to determine if the requirements of ''non-standard'' architectures can be met. Several possible extensions to the ''standard model'' are suggested including software as well as the hardware architectural feature

Improving the Quality of Academic Services through Implementation of Internal Quality Assurance System in State Institute of Islamic Studies STS Jambi

Science.gov (United States)

Iskandar

2017-01-01

Implementation of quality assurance systems in IAIN STS Jambi implemented in early 2012, through the build system of internal quality assurance based on ISO 9001: 2008, in the process of implementation required strong reasons behind not growing atmosphere of academic standards of accreditation of study programs and institutions that are reflected…

A comparative analysis of quality management standards for contract research organisations in clinical trials.

Science.gov (United States)

Murray, Elizabeth; McAdam, Rodney

2007-01-01

This article compares and contrasts the main quality standards in the highly regulated pharmaceutical industry with specific focus on Good Clinical Practice (GCP), the standard for designing, conducting, recording and reporting clinical trials involving human participants. Comparison is made to ISO quality standards, which can be applied to all industries and types of organisation. The study is then narrowed to that of contract research organisations (CROs) involved in the conduct of clinical trials. The paper concludes that the ISO 9000 series of quality standards can act as a company-wide framework for quality management within such organisations by helping to direct quality efforts on a long-term basis without any loss of compliance. This study is valuable because comparative analysis in this domain is uncommon.

42 CFR 440.260 - Methods and standards to assure quality of services.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Methods and standards to assure quality of services. 440.260 Section 440.260 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH... and Limits Applicable to All Services § 440.260 Methods and standards to assure quality of services...

40 CFR 131.8 - Requirements for Indian Tribes to administer a water quality standards program.

Science.gov (United States)

2010-07-01

... administer a water quality standards program. 131.8 Section 131.8 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.8 Requirements for Indian Tribes to administer a water quality standards program. (a) The Regional Administrator, as...

INCITS W1.1 development update: appearance-based image quality standards for printers

Science.gov (United States)

Zeise, Eric K.; Rasmussen, D. René; Ng, Yee S.; Dalal, Edul; McCarthy, Ann; Williams, Don

2008-01-01

In September 2000, INCITS W1 (the U.S. representative of ISO/IEC JTC1/SC28, the standardization committee for office equipment) was chartered to develop an appearance-based image quality standard. (1),(2) The resulting W1.1 project is based on a proposal (3) that perceived image quality can be described by a small set of broad-based attributes. There are currently six ad hoc teams, each working towards the development of standards for evaluation of perceptual image quality of color printers for one or more of these image quality attributes. This paper summarizes the work in progress of the teams addressing the attributes of Macro-Uniformity, Colour Rendition, Gloss & Gloss Uniformity, Text & Line Quality and Effective Resolution.

Knowledge, attitude, and practice of quality standards in small-sized public hospitals, Saudi Arabia

Directory of Open Access Journals (Sweden)

Fahad Khamis Alomari

2015-01-01

Full Text Available Objectives: The aim of this study was to assess current situations in small size hospitals regarding knowledge of staff, their attitude and practice of quality standards, in order to set a plan to improve the current situations and overcome barriers of quality practice. Materials and Methods: A descriptive cross-sectional research was conducted by a validated self-administered questionnaire using systematic random technique. Results: The study included about 37.7% Physicians followed by 28.3% nurses, and 18.8% administrators. Median percentage of participants′ knowledge and attitude scores regarding healthcare quality was 48% and 80% respectively. Meanwhile, the median percentage of participants′ perception toward hospital support and implementation of healthcare quality was 54% and 50% respectively. The main barriers for quality standards implementation and practicing were; staff resistance (84.8% followed by deficient knowledge (81.1%. Knowledge showed significant positive correlation with hospital application of quality standards (P = 0.001. Conclusion: The researcher concluded that improvement of knowledge and attitude toward implementation of quality standards as well as leadership commitment to quality and change management were a critical element for organisational shifting transformation to implementing quality of care. Focusing on small hospital and providing more support with all resources for implementation of quality standards through proper education and training for all staff categories are highly recommended.

Reflection on Quality Assurance System of Higher Vocational Education under Big Data Era

Directory of Open Access Journals (Sweden)

Jiang Xinlan

2015-01-01

Full Text Available Big data has the features like Volume, Variety, Value and Velocity. Here come the new opportunities and challenges for construction of Chinese quality assurance system of higher vocational education under big data era. There are problems in current quality assurance system of higher vocational education, such as imperfect main body, non-formation of internally and externally incorporated quality assurance system, non-scientific security standard and insufficiency in security investment. The construction of higher vocational education under big data era requires a change in the idea of quality assurance system construction to realize the multiple main bodies and multiple layers development trend for educational quality assurance system, and strengthen the construction of information platform for quality assurance system.

Image quality assesment using NEMA NU 4/2008 standards in small animal PET scanner

International Nuclear Information System (INIS)

Gontijo, Rodrigo M.G.; Ferreira, Andréa V.; Silva, Juliana B.; Mamede, Marcelo

2017-01-01

In Brazil, there are few micro PET in use and a quality control protocols standardization are needed to harmonize their use in the research field. Thus, the purpose of this study is to characterize the image quality performance of the micro PET scanner (Lab PET 4, GE healthcare Technologies, Waukesha, WI) using the NEMA NU 4/ 2008 standards and specific phantom. The NEMA image-quality (IQ) phantom consists of 3 different regions to analyze distinct characteristics: image noise (%SD), expressed as percentage SD in a uniform region (%SD), recovery coefficient (RC) and Spill-over (SOR) in air and water. The IQ phantom was filled with 18 F-FDG calibrated at the beginning of acquisition, placed in the center of the field-of-view (FOV) and measured with the typical whole body imaging protocol. The images were reconstructed with different reconstruction methods (FBP-2D; MLEM-3D and OSEM-3D); with and without high resolution (HR) when possible. The results were compared. The LabPET 4 system produces appropriate image and with performance according to the literature. The present study is an initial step to verify the NEMA NU 4/2008 use in the Brazilian scenario for further standardization. (author)

Image quality assesment using NEMA NU 4/2008 standards in small animal PET scanner

Energy Technology Data Exchange (ETDEWEB)

Gontijo, Rodrigo M.G.; Ferreira, Andréa V.; Silva, Juliana B.; Mamede, Marcelo, E-mail: rodrigo.gontijo@cdtn.br, E-mail: rodrigogadelhagontijo1@hotmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2017-07-01

In Brazil, there are few micro PET in use and a quality control protocols standardization are needed to harmonize their use in the research field. Thus, the purpose of this study is to characterize the image quality performance of the micro PET scanner (Lab PET 4, GE healthcare Technologies, Waukesha, WI) using the NEMA NU 4/ 2008 standards and specific phantom. The NEMA image-quality (IQ) phantom consists of 3 different regions to analyze distinct characteristics: image noise (%SD), expressed as percentage SD in a uniform region (%SD), recovery coefficient (RC) and Spill-over (SOR) in air and water. The IQ phantom was filled with {sup 18}F-FDG calibrated at the beginning of acquisition, placed in the center of the field-of-view (FOV) and measured with the typical whole body imaging protocol. The images were reconstructed with different reconstruction methods (FBP-2D; MLEM-3D and OSEM-3D); with and without high resolution (HR) when possible. The results were compared. The LabPET 4 system produces appropriate image and with performance according to the literature. The present study is an initial step to verify the NEMA NU 4/2008 use in the Brazilian scenario for further standardization. (author)

Recommendations for a proposed standard for performing systems analysis

International Nuclear Information System (INIS)

LaChance, J.; Whitehead, D.; Drouin, M.

1998-01-01

In August 1995, the Nuclear Regulatory Commission (NRC) issued a policy statement proposing improved regulatory decisionmaking by increasing the use of PRA [probabilistic risk assessment] in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. A key aspect in using PRA in risk-informed regulatory activities is establishing the appropriate scope and attributes of the PRA. In this regard, ASME decided to develop a consensus PRA Standard. The objective is to develop a PRA Standard such that the technical quality of nuclear plant PRAs will be sufficient to support risk-informed regulatory applications. This paper presents examples recommendations for the systems analysis element of a PRA for incorporation into the ASME PRA Standard

Impact of model uncertainty on soil quality standards for cadmium in rice paddy fields

Energy Technology Data Exchange (ETDEWEB)

Roemkens, P.F.A.M., E-mail: paul.romkens@wur.nl [Soil Science Center, Alterra, WageningenUR. P.O. Box 47, 6700AA Wageningen (Netherlands); Brus, D.J. [Soil Science Center, Alterra, WageningenUR. P.O. Box 47, 6700AA Wageningen (Netherlands); Guo, H.Y.; Chu, C.L.; Chiang, C.M. [Taiwan Agricultural Research Institute (TARI), Wufong, Taiwan (China); Koopmans, G.F. [Soil Science Center, Alterra, WageningenUR. P.O. Box 47, 6700AA Wageningen (Netherlands); Department of Soil Quality, Wageningen University, WageningenUR. P.O. Box 47, 6700AA, Wageningen (Netherlands)

2011-08-01

At present, soil quality standards used for agriculture do not consider the influence of pH and CEC on the uptake of pollutants by crops. A database with 750 selected paired samples of cadmium (Cd) in soil and paddy rice was used to calibrate soil to plant transfer models using the soil metal content, pH, and CEC or soil Cd and Zn extracted by 0.01 M CaCl{sub 2} as explanatory variables. The models were validated against a set of 2300 data points not used in the calibration. These models were then used inversely to derive soil quality standards for Japonica and Indica rice cultivars based on the food quality standards for rice. To account for model uncertainty, strict soil quality standards were derived considering a maximum probability that rice exceeds the food quality standard equal to 10 or 5%. Model derived soil standards based on Aqua Regia ranged from less than 0.3 mg kg{sup -1} for Indica at pH 4.5 to more than 6 mg kg{sup -1} for Japonica-type cultivars in clay soils at pH 7. Based on the CaCl{sub 2} extract, standards ranged from 0.03 mg kg{sup -1} Cd for Indica cultivars to 0.1 mg kg{sup -1} Cd for Japonica cultivars. For both Japonica and Indica-type cultivars, the soil quality standards must be reduced by a factor of 2 to 3 to obtain the strict standards. The strong impact of pH and CEC on soil quality standards implies that it is essential to correct for soil type when deriving national or local standards. Validation on the remaining 2300 samples indicated that both types of models were able to accurately predict (> 92%) whether rice grown on a specific soil will meet the food quality standard used in Taiwan. - Research highlights: {yields} Cadmium uptake by Japonica and Indica rice varieties depends on soil pH and CEC. {yields} Food safety based soil standards range from 0.3 (Indica) to 6 mg kg{sup -1} (Japonica). {yields} Model uncertainty leads to strict soil standards of less than 0.1 mg kg{sup -1} for Indica. {yields} Soil pH and CEC should be

[Study on quality standard of Mucuna pruriens var. utilis].

Science.gov (United States)

Wu, Shi-Hong; Jiang, Wei-Zhe; Lv, Li; Wu, Ling-Ling; Lv, Cong; Shi, Xiao-Xia; Su, Gui-Liang

2009-03-01

To provide scientific basis for the utilization and development of Mucuna pruriens var. utilis by establishing its quality control standard. The bioactive constituents were analyzed by TLC and HPLC. Moisture, ash and the extracts of Mucuna pruriens var. utilis were all determined. The TLC spots of levodopa had similar color with the control group at the same position. The results of HPLC quantitative analysis showed that the linear range of levodopa was 26.45 to approximately 132.25 microg/mL, r = 0.9992, and the average recovery rate was 103.8%, RSD = 1.85%. This method is convenient, accurate, reliable with good reproducibility, so it can be used to establish quality standard for the medicinal material.

A Cross-Country Empirical Study Towards the Impact of Following ISO Management System Standards on Euro-Area Economic Confidence

Directory of Open Access Journals (Sweden)

Ştefan Daniel Armeanu

2017-02-01

Full Text Available This study aims to examine the impact of following ISO management system standards on economic sentiment indicator (ESI as proxy of economic agents’ general view concerning economic activity, for 21 European Union member states over 2005-2014. The empirical research comprises ISO standards with reference to management systems towards quality (ISO 9001, ISO 13485, ISO 16949, food safety (ISO 22000, environment (ISO 14001, and information security (ISO 27001. Panel data fixed effects regression models provide support for a positive impact of the quality management systems related to automotive industry, as well as information security management systems, on the ESI. Further, dynamic panel data approach by way of two-step system generalized method of moments emphasizes a positive influence of quality management systems standard for the medical device industry on Euro-area economic confidence, but a negative effect of food safety management systems. Also, ISO 9001, ISO 22000, and ISO 14001 Granger cause ESI.

Module-based quality system functionality evaluation in production logistics

Energy Technology Data Exchange (ETDEWEB)

Khabbazi, M.R.; Wikander, J.; Onori, M.; Maffei, A.; Chen, D.

2016-07-01

This paper addresses a comprehensive modeling and functionality evaluation of a module-based quality system in production logistics at the highest domain abstract level of business processes. All domain quality business processes and quality data transactions are modeled using BPMN and UML tools and standards at the business process and data modeling. A modular web-based prototype is developed to evaluate the models addressing the quality information system functionality requirements and modularity in production logistics through data scenarios and data queries. Using the object-oriented technique in design at the highest domain level, the proposed models are subject further development in the lower levels for the implementing case. The models are specifically able to manipulate all quality operations including remedy and control in a lot-based make-to-order production logistics system as an individual module. Due to the specification of system as domain design structure, all proposed BPMs, data models, and the actual database prototype are seen referential if not a solution as a practical “to-be” quality business process re-engineering template. This paper sets out to provide an explanatory approach using different practical technique at modeling steps as well as the prototype implementation. (Author)

Laboratory diagnostic methods, system of quality and validation

Directory of Open Access Journals (Sweden)

Ašanin Ružica

2005-01-01

Full Text Available It is known that laboratory investigations secure safe and reliable results that provide a final confirmation of the quality of work. Ideas, planning, knowledge, skills, experience, and environment, along with good laboratory practice, quality control and reliability of quality, make the area of biological investigations very complex. In recent years, quality control, including the control of work in the laboratory, is based on international standards and is used at that level. The implementation of widely recognized international standards, such as the International Standard ISO/IEC 17025 (1 and the implementing of the quality system series ISO/IEC 9000 (2 have become the imperative on the grounds of which laboratories have a formal, visible and corresponding system of quality. The diagnostic methods that are used must constantly yield results which identify the animal as positive or negative, and the precise status of the animal is determined with a predefined degree of statistical significance. Methods applied on a selected population reduce the risk of obtaining falsely positive or falsely negative results. A condition for this are well conceived and documented methods, with the application of the corresponding reagents, and work with professional and skilled staff. This process requires also a consistent implementation of the most rigorous experimental plans, epidemiological and statistical data and estimations, with constant monitoring of the validity of the applied methods. Such an approach is necessary in order to cut down the number of misconceptions and accidental mistakes, for a referent population of animals on which the validity of a method is tested. Once a valid method is included in daily routine investigations, it is necessary to apply constant monitoring for the purpose of internal quality control, in order adequately to evaluate its reproducibility and reliability. Consequently, it is necessary at least twice yearly to conduct

Dataset on the mean, standard deviation, broad-sense heritability and stability of wheat quality bred in three different ways and grown under organic and low-input conventional systems.

Science.gov (United States)

Rakszegi, Marianna; Löschenberger, Franziska; Hiltbrunner, Jürg; Vida, Gyula; Mikó, Péter

2016-06-01

An assessment was previously made of the effects of organic and low-input field management systems on the physical, grain compositional and processing quality of wheat and on the performance of varieties developed using different breeding methods ("Comparison of quality parameters of wheat varieties with different breeding origin under organic and low-input conventional conditions" [1]). Here, accompanying data are provided on the performance and stability analysis of the genotypes using the coefficient of variation and the 'ranking' and 'which-won-where' plots of GGE biplot analysis for the most important quality traits. Broad-sense heritability was also evaluated and is given for the most important physical and quality properties of the seed in organic and low-input management systems, while mean values and standard deviation of the studied properties are presented separately for organic and low-input fields.

System Quality Management in Software Testing Laboratory that Chooses Accreditation

Directory of Open Access Journals (Sweden)

Yanet Brito R.

2013-12-01

Full Text Available The evaluation of software products will reach full maturity when executed by the scheme and provides third party certification. For the validity of the certification, the independent laboratory must be accredited for that function, using internationally recognized standards. This brings with it a challenge for the Industrial Laboratory Testing Software (LIPS, responsible for testing the products developed in Cuban Software Industry, define strategies that will permit it to offer services with a high level of quality. Therefore it is necessary to establish a system of quality management according to NC-ISO/IEC 17025: 2006 to continuously improve the operational capacity and technical competence of the laboratory, with a view to future accreditation of tests performed. This article discusses the process defined in the LIPS for the implementation of a Management System of Quality, from the current standards and trends, as a necessary step to opt for the accreditation of the tests performed.

Quality management standards for facility services in the Italian health care sector.

Science.gov (United States)

Cesarotti, Vittorio; Di Silvio, Bruna

2006-01-01

Health care, one of the most dynamic sectors in Italy, is studied with a particular focus on outsourcing non-core activities such as facility management (FM) services. The project's goals are to define national standards to balance and control facility service evolution, and to drive FM services towards organisational excellence. The authors, in cooperation with a pool of facility service providers and hospitals managers, studied cleaning services--one of the most critical areas. This article describes the research steps and findings following definition and publication of the Italian standard and its application to an international benchmarking process. The method chosen for developing the Italian standard was to merge technical, strategic and organisational aspects with the goal of standardising the contracting system, giving service providers the chance to improve efficiency and quality, while helping healthcare organisations gain from a better, more reliable and less expensive service. The Italian standard not only improved services but also provided adequate control systems for outsourcing organisations. In this win-win context, it is hoped to continually drive FM services towards organisational excellence. This study is specific to the Italian national healthcare system. However, the strategic dynamics described are common to many other contexts. A systematic method for improving hospital FM services is presented. The authors believe that lessons learned from their Italian case study can be used to better understand and drive similar services in other countries or in other FM service outsourcing sectors.

Developing quality standards for physical properties of mineral wool plugs

NARCIS (Netherlands)

Blok, C.; Berg, van den C.C.; Winkel, van A.

2014-01-01

The KIWA certification guidelines for mineral wool products contain standards for slabs and blocks. Propagators would like to introduce quality standards for mineral wool plugs as well. Main concerns were effects of too dense plugs on plant growth, and handling problems with too fluffy or broken

Standard NIM instrumentation system

International Nuclear Information System (INIS)

1990-05-01

NIM is a standard modular instrumentation system that is in wide use throughout the world. As the NIM system developed and accommodations were made to a dynamic instrumentation field and a rapidly advancing technology, additions, revisions and clarifications were made. These were incorporated into the standard in the form of addenda and errata. This standard is a revision of the NIM document, AEC Report TID-20893 (Rev. 4) dated July 1974. It includes all the addenda and errata items that were previously issued as well as numerous additional items to make the standard current with modern technology and manufacturing practice

Application of quality assurance to MC and A systems

International Nuclear Information System (INIS)

Skinner, A.J.; Delvin, W.L.

1986-01-01

Application of the principles of quality assurance to MC and A has been done at DOE's Savannah River Operations Office. The principles were applied to the functions within the MC and A Branch, including both the functions used to operate the Branch and those used to review the MC and A activities of DOE/SR's contractor. The purpose of this paper is to discuss that application of quality assurance and to show how the principles of quality assurance relate to the functions of a MC and A system, for both a DOE field office and a contractor. The principles (presented as requirements from the NQA-1 standard) are briefly discussed, a method for applying quality assurance is outlined, application at DOE/SR is shown, and application to a contractor's MC and A system is discussed

Transforming an EPA QA/R-2 quality management plan into an ISO 9002 quality management system.

Science.gov (United States)

Kell, R A; Hedin, C M; Kassakhian, G H; Reynolds, E S

2001-01-01

The Environmental Protection Agency's (EPA) Office of Emergency and Remedial Response (OERR) requires environmental data of known quality to support Superfund hazardous waste site projects. The Quality Assurance Technical Support (QATS) Program is operated by Shaw Environmental and Infrastructure, Inc. to provide EPA's Analytical Operations Center (AOC) with performance evaluation samples, reference materials, on-site laboratory auditing capabilities, data audits (including electronic media data audits), methods development, and other support services. The new QATS contract awarded in November 2000 required that the QATS Program become ISO 9000 certified. In a first for an EPA contractor, the QATS staff and management successfully transformed EPA's QA/R-2 type Quality Management Plan into a Quality Management System (QMS) that complies with the requirements of the internationally recognized ISO 9002 standard and achieved certification in the United States, Canada, and throughout Europe. The presentation describes how quality system elements of ISO 9002 were implemented on an already existing quality system. The psychological and organizational challenges of the culture change in QATS' day-to-day operations will be discussed for the benefit of other ISO 9000 aspirants.

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Science.gov (United States)

2010-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and... Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for... officials that it meets implicit standards of safety and quality adopted by the industry or as later...

2. Product quality control and assurance system

International Nuclear Information System (INIS)

1990-01-01

Product quality control and assurance are dealt with in relation to reliability in nuclear power engineering. The topics treated include product quality control in nuclear power engineering, product quality assurance of nuclear power plant equipment, quality assurance programs, classification of selected nuclear power equipment, and standards relating to quality control and assurance and to nuclear power engineering. Particular attention is paid to Czechoslovak and CMEA standards. (P.A.). 2 figs., 1 tab., 12 refs

The Image Quality of a Digital Chest X-Ray Radiography System: Comparison of Quantitative Image Quality Analysis and Radiologists' Visual Scoring

Energy Technology Data Exchange (ETDEWEB)

Nam, Ji Ho [Dept. of Radiology Oncology, Yongsan Hospital, Pusan National University College of Medicine, Yongsan (Korea, Republic of); Chung, Myung Jin [Dept. of Radiology, Samsung Medical Center, Seoul (Korea, Republic of); Park, Darl; Kim, Won Taek; Kim, Yong Ho; Ki, Yong Kan; Kim, DFong Hyun; Lee, Ju Hee; Kim, Dong Won [Dept. of Radiology Oncology, Yongsan Hospital, Pusan National University College of Medicine, Yongsan (Korea, Republic of); Jeon, Ho Sang [Reserach Institue for Convergence of Biomedical Science and Technology, Yongsan Hospital, Pusan National University College of Medicine, Yongsan (Korea, Republic of)

2011-11-15

To evaluate the performance of imaging devices, which should be periodically monitored to maintain high quality images to the radiologists. Additionally, this evaluation may prevent patients from radiation over-exposure. The most suitable engineering standard for imaging performance evaluation of digital X-ray thoracic images was determined. IEC 62220-1 standards were used to evaluate the performance of the images. In succession, the visibilities of overall image, pneumothorax, and humerus head in anthropomorphic thoracic phantom images were used to evaluate the image qualities by radiologists. The rank correlation coefficient (p) of visual scoring by radiologists with system spatial resolution is not meaningful (p-value, p = 0.295), but is significant with image noise (p-value, p -0.9267). Finally, the noise equivalent quanta (NEQ) presents a high rank correlation for visual scoring of radiologists (p-value, p = 0.9320). Image quality evaluation of radiologists were mainly affected by imaging noise. Hence, the engineered standard for evaluating image noise is the most important index to effectively monitor the performance of X-ray images. Additionally, the NEQ can be used to evaluate the performance of radiographic systems, because it theoretically corresponds to the synthetic image quality of systems.

Ljubljana quality selection (LQS) - innovative case of restaurant assessment system

OpenAIRE

Maja Uran Maravić; Daniela Gračan; Zrinka Zadel

2014-01-01

The purpose – The purpose of this paper is to briefly present the most well-known restaurant assessment systems where restaurant are assessed by experts. The aim is to highlight the strengths and weaknesses of each system. Design –The special focus is to give answers on questions: how are the restaurants assessed by experts, which are the elements and standards of assessment and whether they are consistent with the quality dimensions as advocated in the theory of service quality. Methodology ...

Respect of standard air quality in major italian towns

International Nuclear Information System (INIS)

Valerio, F.

1995-01-01

In 1983 air quality standards, related to SO 2 , NO 2 , CO, airborne particulate, lead, O 3 were introduced in italian legislation. Now, SO 2 and lead concentrations are rapidly decreasing everywhere thanks to drastic reductions of sulphur and lead in fuels. The situation is still critic in many urban areas as far as NO 2 and CO are concerned. The increasing number of automobiles circulating in italian urban areas (+43% from 1980 to 1988) is probably reducing the positive effects expected from more efficient and less polluting engines. Electric public transport, aiming at low interference with private traffic, and a different urban organization, aiming at reducing compulsory mobility, could be the proper choices to offer italians both higher standards of urban life and air quality

Quality Management System at the Nuclear Regulatory Authority of the Slovak Republic

International Nuclear Information System (INIS)

Husarcek, J.; Novak, S.

2008-01-01

The process-oriented quality management system (QMS) implemented at the Nuclear Regulatory Authority of the Slovak Republic (UJD SR) in compliance with the EN ISO 9001:2001 standard is described. The history of the establishment and development of the QMS is given. The main, managerial and supporting processes with respect to defined activities are specified, and a scheme of their interactions is presented. The contents of the Quality Manual content and the structure of the system documentation are briefly described. The responsibilities for the operation and improvements of the QMS are described along with the methods applied (internal and external audits, self-assessment - Common Assessment Framework (CAF)). Examples of established quality objectives and indicators for some processes are provided. A future development of the QMS is expected in accordance with the relevant ISO Standard and IAEA recommendations and based on evaluation of the effectiveness of the critical system. (orig.)

Report of the FELASA Working Group on evaluation of quality systems for animal units.

Science.gov (United States)

Howard, B; van Herck, H; Guillen, J; Bacon, B; Joffe, R; Ritskes-Hoitinga, M

2004-04-01

This report compares and considers the merits of existing, internationally available quality management systems suitable for implementation in experimental animal facilities. These are: the Good Laboratory Practice Guidelines, ISO 9000:2000 (International Organization for Standardization) and AAALAC International (Association for Assessment and Accreditation of Laboratory Animal Care International). Good laboratory practice (GLP) is a legal requirement for institutions undertaking non-clinical health and environmental studies for the purpose of registering or licensing for use and which have to be 'GLP-compliant'. GLP guidelines are often only relevant for and obtainable by those institutions. ISO is primarily an external business standard, which provides a management tool to master and optimize a business activity; it aims to implement and enhance 'customer satisfaction'. AAALAC is primarily a peer-reviewed system of accreditation which evaluates the organization and procedures in programmes of animal care and use to ensure the appropriate use of animals, safeguard animal well-being (ensuring state-of-the-art housing, management, procedural techniques, etc.) as well as the management of health and safety of staff. Management needs to determine, on the basis of a facility's specific goals, whether benefits would arise from the introduction of a quality system and, if so, which system is most appropriate. The successful introduction of a quality system confers peer-recognition against an independent standard, thereby providing assurance of standards of animal care and use, improving the quality of animal studies, and contributing to the three Rs-reduction, refinement and replacement.

Analysis of normative requirements for the development and implementation of a quality management system in Brazilian nuclear installations and activities

International Nuclear Information System (INIS)

Kibrit, Eduardo

2008-01-01

The present work identifies, characterizes and analyses the normative requirements for the development and implementation of quality management systems in Brazilian nuclear installations and activities. The requirements established in standards IAEA GS-R-3, IAEA GS-G-3.1, IAEA DS 349, NBR ISO 9001:2000 e CNEN-NN-1.16 are critically analyzed. A correlation matrix of the applicable standards is presented and the related topics among them are identified. The standards IAEA GS-R-3, IAEA GS-G-3.1 and IAEA DS 349 define general requirements for establishing, implementing, assessing and continually improving an integrated management system in nuclear installations and activities, in IAEA member countries. The standard NBR ISO 9001:2000 establishes general requirements for the implementation of a quality management system in all kinds of organizations. The standard CNEN NN-1.16 establishes the regulating requirements for the quality assurance systems and programs of nuclear installations, for licensing and authorization for operation of these installations in Brazil. The standard IAEA GS-R-3 that replaces the code IAEA 50-C-Q introduces the concept of 'Integrated Management System' for the nuclear area, in preference to the concepts of 'Quality Assurance' and 'Quality Management'. This new approach is aligned with the current tendency incorporating requirements of quality, safety, health, environment, security, economics and other in a unique management system. Examples of quality management systems implemented by Brazilian nuclear organizations and by nuclear organizations outside Brazil are analyzed and considered in the discussion of results. (author)

Environmental Restoration Program quality system requirements for the Hanford Site

International Nuclear Information System (INIS)

Cote, R.F.

1993-11-01

This document defines the quality system requirements for the US Department of Energy, Richland Operations Office, Environmental Restoration Program at the Hanford Site. The Quality System Requirements (OSR) for the Hanford Site integrates quality assurance requirements from the US Department of Energy Orders, the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement), and applicable industry standards into a single source document for the development of quality systems applicable to the Environmental Restoration Program activities. This document, based on fifteen criteria and divided intro three parts, provides user organizations with the flexibility to incorporate only those criteria and parts applicable to their specific scopes of work. The requirements of this document shall be applied to activities that affect quality based on a graded approach that takes into consideration the risk inherent in, as well as the importance of, specific items, services, and activities in terms of meeting ER Program objectives and customer expectations. The individual quality systems developed in accordance with this document are intended to provide an integrated management control system that assures the conduct of ER Program activities in a manner that protects human health and the environment

Indoor air quality environmental information handbook: Building system characteristics

International Nuclear Information System (INIS)

1987-01-01

This manual, the third in a series, focuses on residential building system characteristics and their effects on indoor air quality. The manual addresses: residential indoor air pollutants by source, indoor concentrations, health effects, source control and mitigation techniques, standards and guidelines; building system characteristics of air exchange, pollutant source strength, residence volume, site characteristics, structural design, construction, and operation, infiltration and ventilation system, building occupancy; and monitoring methods

Supplier quality assurance systems: a study in the nuclear industry

International Nuclear Information System (INIS)

Singer, A.J.; Churchill, G.F.; Dale, B.G.

1988-01-01

The results are reported of a study which investigated the impact of quality assurance on 13 suppliers to the nuclear industry. The purpose of the study was to determine the benefits and problems of applying quality assurance in the supply of high risk plant items and material for nuclear installations. The paper discusses the problems facing the industry including: multiple audits and inspections, the irritation with having to contend with two quality system standards (namely BS 5750 and BS 5882) and the cost effectiveness of the more stringent quality system and quality control surveillance requirements imposed by the nuclear industry. It is also pointed out that companies supplying non-nuclear industrial customers were dissatisfied with the qualifications, experience and professional competence of some auditors and many inspectors. (author)

Quality evaluation of health information system's architectures developed using the HIS-DF methodology.

Science.gov (United States)

López, Diego M; Blobel, Bernd; Gonzalez, Carolina

2010-01-01

Requirement analysis, design, implementation, evaluation, use, and maintenance of semantically interoperable Health Information Systems (HIS) have to be based on eHealth standards. HIS-DF is a comprehensive approach for HIS architectural development based on standard information models and vocabulary. The empirical validity of HIS-DF has not been demonstrated so far. Through an empirical experiment, the paper demonstrates that using HIS-DF and HL7 information models, semantic quality of HIS architecture can be improved, compared to architectures developed using traditional RUP process. Semantic quality of the architecture has been measured in terms of model's completeness and validity metrics. The experimental results demonstrated an increased completeness of 14.38% and an increased validity of 16.63% when using the HIS-DF and HL7 information models in a sample HIS development project. Quality assurance of the system architecture in earlier stages of HIS development presumes an increased quality of final HIS systems, which supposes an indirect impact on patient care.

Using a standards committee to design practical procedure system improvements

International Nuclear Information System (INIS)

Grider, D.A.; Plung, D.

1993-01-01

In the post-Three Mile Island (TMI) environment, numerous reports have been issued on how to improve the quality of procedures used at government and commercial nuclear facilities. The studies tend to be long on what is wrong with existing procedures and short on practical directions on how to fix those faults. Few of these studies have been conducted by practitioners with full-time procedure-managing or procedure writing experience. None of these studies go into detail on how to improve the procedure system itself. Over the last 10 yr, various nuclear facilities within the US Department of Energy (DOE) have carried out individual programs to develop procedures that meet post-TMI standards. However, ∼2 yr ago, DOE formed a Procedures Standards Committee to advise DOE in developing a set of post-TMI guidelines that could be consistently applied throughout all DOE nuclear facilities. The committee has achieved not only its original mission by producing a series of integrated guidance documents but has also evolved a systems approach to procedures management that sets new standards for procedure quality and efficiency. As members of this committee, the authors want to describe what has made the group's approach so successful. The lessons learned may be translatable to a wide range of government and commercial industry procedure programs

International Conference on Harmonisation; guidance on Q10 Pharmaceutical Quality System; availability. Notice.

Science.gov (United States)

2009-04-08

The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "Q10 Pharmaceutical Quality System." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). The guidance describes a model for an effective quality management system for the pharmaceutical industry, referred to as the Pharmaceutical Quality System. The guidance is intended to provide a comprehensive approach to an effective pharmaceutical quality system that is based on International Organization for Standardization (ISO) concepts, includes applicable good manufacturing practice (GMP) regulations and complements ICH guidances on "Q8 Pharmaceutical Development" and "Q9 Quality Risk Management."

Automotive standard ISO/TS 16949 as a quality determinant

Directory of Open Access Journals (Sweden)

Joanna Rosak-Szyrocka

2016-03-01

Full Text Available The main aim of this paper is to present the standard ISO/TS 16949. In the modern world of competition, quality is one of the most important factors. Modern organizations should gamble on quality, regardless of the type of business, because it is the basic form of running a business effectively. It is not only a factor of market success, but also an indication of organizational culture.

The role of Health Impact Assessment in the setting of air quality standards: An Australian perspective

Energy Technology Data Exchange (ETDEWEB)

Spickett, Jeffery, E-mail: J.Spickett@curtin.edu.au [WHO Collaborating Centre for Environmental Health Impact Assessment (Australia); Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia (Australia); Katscherian, Dianne [WHO Collaborating Centre for Environmental Health Impact Assessment (Australia); Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia (Australia); Harris, Patrick [CHETRE — UNSW Research Centre for Primary Health Care and Equity, University of New South Wales (Australia)

2013-11-15

The approaches used for setting or reviewing air quality standards vary from country to country. The purpose of this research was to consider the potential to improve decision-making through integration of HIA into the processes to review and set air quality standards used in Australia. To assess the value of HIA in this policy process, its strengths and weaknesses were evaluated aligned with review of international processes for setting air quality standards. Air quality standard setting programmes elsewhere have either used HIA or have amalgamated and incorporated factors normally found within HIA frameworks. They clearly demonstrate the value of a formalised HIA process for setting air quality standards in Australia. The following elements should be taken into consideration when using HIA in standard setting. (a) The adequacy of a mainly technical approach in current standard setting procedures to consider social determinants of health. (b) The importance of risk assessment criteria and information within the HIA process. The assessment of risk should consider equity, the distribution of variations in air quality in different locations and the potential impacts on health. (c) The uncertainties in extrapolating evidence from one population to another or to subpopulations, especially the more vulnerable, due to differing environmental factors and population variables. (d) The significance of communication with all potential stakeholders on issues associated with the management of air quality. In Australia there is also an opportunity for HIA to be used in conjunction with the NEPM to develop local air quality standard measures. The outcomes of this research indicated that the use of HIA for air quality standard setting at the national and local levels would prove advantageous. -- Highlights: • Health Impact Assessment framework has been applied to a policy development process. • HIA process was evaluated for application in air quality standard setting. �

Quality data systems

International Nuclear Information System (INIS)

Bergman, J.E.; Patterson, R.G.

1976-01-01

General Electric's Nuclear Fuel Department data system strategy of multifunctional system integration and specific applications of data systems for the Quality Assurance Programme is detailed. Descriptions of two manufacturing control systems and their function in satisfying quality data requirements are included. The timesharing quality data system developed for processing laboratory, traceability and material release data in the Fuel Manufacturing Operation is described. In addition, specific references are made to those areas where significant time reductions have been realized through the utilization of mechanized data-handling systems. (author)

Chinese green product standards: international experience and pathway for a unified system

Science.gov (United States)

Yun, Fu; Ling, Lin; Dongfeng, Gao; Shuo, Yang

2017-11-01

The establishment of a unified green product standard system is of great importance regarding the effective supply of green products and meeting trend of the consumption upgrade. It also is helpful to reduce the cost of green information disclosure of enterprises, and facilitate the supply-side structural reform. Based on the experience of developing and implementing green product standards in the EU, Germany, America, Japan and so on, combined with current Chinese standard systems including environmental protection, energy conservation, water conservation, low carbon, recycling, regeneration and organic, with the adoption of the life cycle thinking, this paper brings forward basic requirements on organizations including pollutant emissions, establishment of management system, energy conservation and emission reduction technology and green supply chain management, and proposes indicator requirements on product including resource attributes, energy attributes, environmental attributes and quality attributes, so as to guide the establishment of green product evaluation standards in the context of China.

AirNow Information Management System - Global Earth Observation System of Systems Data Processor for Real-Time Air Quality Data Products

Science.gov (United States)

Haderman, M.; Dye, T. S.; White, J. E.; Dickerson, P.; Pasch, A. N.; Miller, D. S.; Chan, A. C.

2012-12-01

Built upon the success of the U.S. Environmental Protection Agency's (EPA) AirNow program (www.AirNow.gov), the AirNow-International (AirNow-I) system contains an enhanced suite of software programs that process and quality control real-time air quality and environmental data and distribute customized maps, files, and data feeds. The goals of the AirNow-I program are similar to those of the successful U.S. program and include fostering the exchange of environmental data; making advances in air quality knowledge and applications; and building a community of people, organizations, and decision makers in environmental management. In 2010, Shanghai became the first city in China to run this state-of-the-art air quality data management and notification system. AirNow-I consists of a suite of modules (software programs and schedulers) centered on a database. One such module is the Information Management System (IMS), which can automatically produce maps and other data products through the use of GIS software to provide the most current air quality information to the public. Developed with Global Earth Observation System of Systems (GEOSS) interoperability in mind, IMS is based on non-proprietary standards, with preference to formal international standards. The system depends on data and information providers accepting and implementing a set of interoperability arrangements, including technical specifications for collecting, processing, storing, and disseminating shared data, metadata, and products. In particular, the specifications include standards for service-oriented architecture and web-based interfaces, such as a web mapping service (WMS), web coverage service (WCS), web feature service (WFS), sensor web services, and Really Simple Syndication (RSS) feeds. IMS is flexible, open, redundant, and modular. It also allows the merging of data grids to create complex grids that show comprehensive air quality conditions. For example, the AirNow Satellite Data Processor

Air Quality Standards for Particulate Matter (PM) at high altitude cities

International Nuclear Information System (INIS)

Bravo Alvarez, H.; Sosa Echeverria, R.; Sanchez Alvarez, P.; Krupa, S.

2013-01-01

The Air Quality Standards for Particulate Matter (PM) at high altitude urban areas in different countries, must consider the pressure and temperature due to the effect that these parameters have on the breath volume. This paper shows the importance to correct Air Quality Standards for PM considering pressure and temperature at different altitudes. Specific factors were suggested to convert the information concerning PM, from local to standard conditions, and adjust the Air Quality Standards for different high altitudes cities. The correction factors ranged from: 1.03 for Santiago de Chile to 1.47 for El Alto Bolivia. Other cities in this study include: Mexico City, México; La Paz, Bolivia; Bogota, Cali and Medellin, Colombia; Quito, Ecuador and Cuzco, Peru. If these corrections are not considered, the atmospheric concentrations will be underestimated. - Highlights: ► AQS for particulate matter concentrations adjusted by pressure and temperature. ► Particulate matter concentrations can be underestimated in high altitude Cities. ► Particulate matter concentrations must be compared under the same conditions. - In order to compare high altitude atmospheric PM concentrations with AQS, one must consider T and P of the sampling site.

Reducing the risk of failure: Software Quality assurance standards and methods

International Nuclear Information System (INIS)

Elphick, J.; Cope, H.

1992-01-01

An effective Software Quality Assurance (SQA) program provides an overall approach to software engineering and the establishment of proven methods for the production of reliable software. And, in the authors experience, the overall costs for the software life are diminished with the application of quality methods. In their experience, the issues for implementing quality standards and practices are many. This paper addresses those issues as well as the lessons learned from developing and implementing a number of software quality assurance programs. Their experience includes the development and implementation of their own NRC accepted SQA program and an SQA program for an engineering software developer, as well as developing SQA procedures, standards, and methods for utilities, medical and commercial clients. Some of the issues addressed in this paper are: setting goals and defining quality; applying the software life cycle; addressing organizational issues; providing flexibility and increasing productivity; producing effective documentation; maintaining quality records; Imposing software configuration management; conducting reviews, audits, and controls; verification and validation; and controlling software procurement

A new approach in the development of quality management systems for (micro)electronics

Science.gov (United States)

Bacivarov, Ioan C.; Bacivarov, Angelica; Gherghina, Cǎtǎlina

2016-12-01

This paper presents the new approach in the analysis of the Quality Management Systems (QMS) of companies, based on the revised standard ISO 9001:2015. In the first part of the paper, QMS based on ISO 9001 certification are introduced; the changes and the updates proposed for the new version of ISO 9001:2015 are critically analyzed, based on the documents elaborated by ISO/TC 176. The approach based on ISO 9001:2015 could be considered as "beginning of a new era in development of quality management systems". A comparison between the between the "old" standard ISO 9001:2008 and the "new" standard ISO 9001:2015 is made. In the second part of the paper, steps to be followed in a company to implement this new standard are presented. A peculiar attention is given to the new concept of risk-based thinking in order to support and improve application of the process based approach. The authors conclude that, by considering risk throughout the organization the likelihood of achieving stated objectives is improved, output is more consistent and customers can be confident that they will receive the expected results. Finally, the benefits of the new approach in the development of quality management systems are outlined, as well as how they are reflected in the management of companies in general and those in electronics field, in particular. As demonstrated in this paper, well understood and properly applied, the new approach based on the revised standard ISO9001:2015 could offer a better quality management for companies operating in electronics and beyond.

Re-Establishment of Standard Radiation Qualities for Calibration of Dosemeter in Diagnostic Radiology - RQR Series

International Nuclear Information System (INIS)

Asmaliza Hashim; Norhayati Abdullah; Mohd Firdaus Abd Rahman

2016-01-01

After repairing the high voltage (HV) generator for Philips MG165 X-Ray Machine, the reestablishment of the standard radiation qualities has been done at Medical Physics Calibration Laboratory to meet the IEC and IAEA standard. Standard radiation qualities are the important criteria for calibration of dosemeter in diagnostic radiology. Standard radiation qualities are defined as the added filtration needed to produce and the half value layer (HVL) of the beam for specifies x-ray tube kilo voltage (kV). For calibration of dosemeter in diagnostic radiology, standard radiation qualities RQR represent the beam incident on the patient in general radiography, fluoroscopy and dental application. The HVL were measured using PTW ion chamber of volume 1 cm"3 with PTW electrometer and aluminium filter with 99.9 % purity was used as additional filter for RQR and filter for HVL. The first establishment of standard radiation qualities was made in 2009 for the radiation qualities of RQR. The results of additional filter and 1st HVL from 2009 to 2016 will be discussed further in paper. The ratios of the measured HVL to the standard IEC HVL value for the RQR series also described in this paper. The details of the measurement and the results are described in this paper. (author)

Safety evaluation report related to the preliminary design of the Standard Reference System, RESAR-414

International Nuclear Information System (INIS)

1978-11-01

The safety evaluation for the Westinghouse Standard Reactor includes information on general reactor characteristics; design criteria for systems and components; reactor coolant system; engineered safety systems; instrumentation and controls; electric power systems; auxiliary systems; steam and power conversion system; radioactive waste management; radiation protection; conduct of operations; accident analyses; and quality assurance

The six critical attributes of the next generation of quality management software systems.

Science.gov (United States)

Clark, Kathleen

2011-07-01

Driven by both the need to meet regulatory requirements and a genuine desire to drive improved quality, quality management systems encompassing standard operating procedure, corrective and preventative actions and related processes have existed for many years, both in paper and electronic form. The impact of quality management systems on 'actual' quality, however, is often reported as far less than desired. A quality management software system that moves beyond formal forms-driven processes to include a true closed loop design, manage disparate processes across the enterprise, provide support for collaborative processes and deliver insight into the overall state of control has the potential to close the gap between simply accomplishing regulatory compliance and delivering measurable improvements in quality and efficiency.

Quality assurance and evaluation system in japanese higher education

Directory of Open Access Journals (Sweden)

Ana Mami Yamaguchi

2016-03-01

Full Text Available Abstract In this paper we aim to contribute to the debate over accountability and assessment of higher education (HE by introducing the Japanese system. We first discuss the circumstances and issues surrounding Japanese HE and then examine the historical development of the quality assurance and evaluation system. Since the 1990s, with the implementation of policies that focused on liberalization, deregulation and increased institutional autonomy, the role of the government has shifted from setting strict regulations and quality standards to organizing an evaluation system for assessing the learning outcomes and improving accountability of the HE institutions. Finally, we suggest how Japan may take hints from Brazil in organizing an evaluation system on a national level that can more efficiently support and assess HE institutions

National BTS bronchiectasis audit 2012: is the quality standard being adhered to in adult secondary care?

Science.gov (United States)

Hill, Adam T; Routh, Chris; Welham, Sally

2014-03-01

A significant step towards improving care of patients with non-cystic fibrosis bronchiectasis was the creation of the British Thoracic Society (BTS) national guidelines and the quality standard. A BTS bronchiectasis audit was conducted between 1 October and 30 November 2012, in adult patients with bronchiectasis attending secondary care, against the BTS quality standard. Ninety-eight institutions took part, submitting a total of 3147 patient records. The audit highlighted the variable adoption of the quality standard. It will allow the host institutions to benchmark against UK figures and drive quality improvement programmes to promote the quality standard and improve patient care.

The relationship between social capital and quality management systems in European hospitals: a quantitative study.

Science.gov (United States)

Hammer, Antje; Arah, Onyebuchi A; Dersarkissian, Maral; Thompson, Caroline A; Mannion, Russell; Wagner, Cordula; Ommen, Oliver; Sunol, Rosa; Pfaff, Holger

2013-01-01

Strategic leadership is an important organizational capability and is essential for quality improvement in hospital settings. Furthermore, the quality of leadership depends crucially on a common set of shared values and mutual trust between hospital management board members. According to the concept of social capital, these are essential requirements for successful cooperation and coordination within groups. We assume that social capital within hospital management boards is an important factor in the development of effective organizational systems for overseeing health care quality. We hypothesized that the degree of social capital within the hospital management board is associated with the effectiveness and maturity of the quality management system in European hospitals. We used a mixed-method approach to data collection and measurement in 188 hospitals in 7 European countries. For this analysis, we used responses from hospital managers. To test our hypothesis, we conducted a multilevel linear regression analysis of the association between social capital and the quality management system score at the hospital level, controlling for hospital ownership, teaching status, number of beds, number of board members, organizational culture, and country clustering. The average social capital score within a hospital management board was 3.3 (standard deviation: 0.5; range: 1-4) and the average hospital score for the quality management index was 19.2 (standard deviation: 4.5; range: 0-27). Higher social capital was associated with higher quality management system scores (regression coefficient: 1.41; standard error: 0.64, p=0.029). The results suggest that a higher degree of social capital exists in hospitals that exhibit higher maturity in their quality management systems. Although uncontrolled confounding and reverse causation cannot be completely ruled out, our new findings, along with the results of previous research, could have important implications for the work of

Headmasters Training for Creating the In-School Quality Management System

Directory of Open Access Journals (Sweden)

M. A. Desyateritchenko

2012-01-01

Full Text Available The paper looks at the issue of the further professional training of educational staff for developing quality management systems. Mastering the qualitative educational practices provides the effective school training quality assessment, as well as optimization of staff, material, technical and financial resources, and consideration of the requirements of educational process participants. The peculiarities of the quality management penetration into the general educational sphere are analyzed. The factors obstructing the innovative experience spreading are denoted along with the corresponding ways of experimental practices. The content and organizational technological aspects of headmasters and teaching staff readiness for implementing the above innovation in the system of further professional training are defined. The stages of a lyceum readiness for certification of in-school quality management system according to the international standard ISO 9001:2008 are described. The author points out the necessity of developing the training system for managerial and teaching staff with regard to the person oriented and humanity approach. 

Control system architecture: The standard and non-standard models

International Nuclear Information System (INIS)

Thuot, M.E.; Dalesio, L.R.

1993-01-01

Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a open-quotes standard modelclose quotes. The open-quotes standard modelclose quotes consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the open-quotes standard modelclose quotes to determine if the requirements of open-quotes non-standardclose quotes architectures can be met. Several possible extensions to the open-quotes standard modelclose quotes are suggested including software as well as the hardware architectural features

KNOWLEDGE AND APPLICATION OF METHODS AND SYSTEMS QUALITY ASSURANCE IN ORCHARD FARMS IN POLAND

Directory of Open Access Journals (Sweden)

Eugenia Czernyszewicz

2013-06-01

Full Text Available Poland is significant producer of fruits in Europe. After accession to the EU, fruit producers are obligated to comply with operative rules and standards on this market which are related to ensuring commercial and healthcare products of appropriate quality. The quality of fruits available on the market is varied. This results from the fact that in the past, in domestic horticulture, more attention was paid to enlargement of the acreage, the modernization of orchards, increasing the intensity of production and productivity than on issues related to certification and quality management systems. Therefore, the aim of the work was to show the producer's opinion on methods and systems which assure quality of fruits. It was stated that producers have a good knowledge of the methods and systems of fruit quality assurance. Knowledge of these issues is significantly associated with the scale of the fruit production. The knowledge of the principles of integrated fruit production and trading standards GLOBALG.A.P. was declared most often. These methods of quality assurance were also top rated by producers and implemented mostly in farms.

Learning Disabilities and Achieving High-Quality Education Standards

Science.gov (United States)

Gartland, Debi; Strosnider, Roberta

2017-01-01

This is an official document of the National Joint Committee on Learning Disabilities (NJCLD), of which Council for Learning Disabilities is a long-standing, active member. With this position paper, NJCLD advocates for the implementation of high-quality education standards (HQES) for students with learning disabilities (LD) and outlines the…

Quality management using TQC

International Nuclear Information System (INIS)

Hwang, Ui Cheol

1992-03-01

This book introduces conception on quality and quality management, standardization with meaning, principle and structure of it, and system, company standard for quality management, quality management on planning, organization and operation, quality guarantee with system evaluation and information, policy management on policy, purpose and daily life, quality management on research and development infrastructure, quality management on design and production facilities, statistical method of quality management, control chart and process capability.

New Quality Standards of Testing Idlers for Highly Effective Belt Conveyors

Science.gov (United States)

Król, Robert; Gladysiewicz, Lech; Kaszuba, Damian; Kisielewski, Waldemar

2017-12-01

The paper presents result of research and analyses carried out into the belt conveyors idlers’ rotational resistance which is one of the key factor indicating the quality of idlers. Moreover, idlers’ rotational resistance is important factor in total resistance to motion of belt conveyor. The evaluation of the technical condition of belt conveyor idlers is carried out in accordance with actual national and international standards which determine the methodology of measurements and acceptable values of measured idlers’ parameters. Requirements defined by the standards, which determine the suitability of idlers to a specific application, despite the development of knowledge on idlers and quality of presently manufactured idlers maintain the same level of parameters values over long periods of time. Nowadays the need to implement new, efficient and economically justified solution for belt conveyor transportation systems characterized by long routes and energy-efficiency is often discussed as one of goals in belt conveyors’ future. One of the basic conditions for achieving this goal is to use only carefully selected idlers with low rotational resistance under the full range of operational loads and high durability. Due to this it is necessary to develop new guidelines for evaluation of the technical condition of belt conveyor idlers in accordance with actual standards and perfecting of existing and development of new methods of idlers testing. The changes in particular should concern updating of values of parameters used for evaluation of the technical condition of belt conveyor idlers in relation to belt conveyors’ operational challenges and growing demands in terms of belt conveyors’ energy efficiency.

Department of Defense Quality Management Systems and ISO 9000:2000

National Research Council Canada - National Science Library

Lucius, Tommie

2002-01-01

...) to the Department of Defense (DoD) quality management system (QMS) in procurement. In particular, the researcher will examine the new standard and its utility for DoD procurement, focusing on changes from the previous ISO 9000 series...

76 FR 76048 - Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards

Science.gov (United States)

2011-12-06

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 81 [EPA-HQ-OAR-2009-0443; FRL-9492-3] RIN 2060-AR17 Air Quality Designations for the 2008 Lead (Pb) National Ambient Air Quality Standards Correction In rule document 2011-29460 appearing on pages 72097-72120 in the issues of Tuesday, November 22, 2011...

Rough Standard Neutrosophic Sets: An Application on Standard Neutrosophic Information Systems

Directory of Open Access Journals (Sweden)

Nguyen Xuan Thao

2016-12-01

Full Text Available A rough fuzzy set is the result of the approximation of a fuzzy set with respect to a crisp approximation space. It is a mathematical tool for the knowledge discovery in the fuzzy information systems. In this paper, we introduce the concepts of rough standard neutrosophic sets and standard neutrosophic information system, and give some results of the knowledge discovery on standard neutrosophic information system based on rough standard neutrosophic sets.

API and ISO standards can be combined

International Nuclear Information System (INIS)

Weightman, R.T.; Warnack, M.F.

1992-01-01

This paper reports that oil field equipment and product manufacturers can maintain a competitive advantage and minimize costs by integrating American Petroleum Institute (API) licensing programs with International Standards Organization (ISO) 9001 standards under one quality system. A combined quality system approach can position a company for quality system certification under ISO 9001 while maintaining API specifications. Furthermore, only one quality system manual is needed for API licensing and ISO certification, avoiding duplication of effort. The benefits of a documented quality program include the flowing: Job descriptions and personnel qualification requirements are documented; The improved documentation allows direct tracing of specific production activities; Laboratory test methods and calibration of test equipment follow accepted standards for more reliable and reproducible test data; Quality control becomes proactive, not reactive, through internal process controls previously not implemented; Employee attitudes improve through appreciation for the overall goals of the company; Ambiguous quality issues, such as documenting special customer requirements, are easily resolved; and The company image improves with customers, particularly for those that require API Specification Q1 or ISO 9001 compliance or those having their own quality performance standards

Development of Quality Management Systems for Clinical Practice Guidelines in Korea.

Science.gov (United States)

Jo, Heui-Sug; Kim, Dong Ik; Chang, Sung-Goo; Shin, Ein-Soon; Oh, Moo-Kyung

2015-11-01

This study introduces the Clinical practice guidelines (CPGs) appraisal system by the Korean Academy of Medical Sciences (KAMS). Quality management policies for CPGs vary among different countries, which have their own cultures and health care systems. However, supporting developers in guideline development and appraisals using standardized tools are common practices. KAMS, an organization representing the various medical societies of Korea, has been striving to establish a quality management system for CPGs, and has established a CPGs quality management system that reflects the characteristics of the Korean healthcare environment and the needs of its users. KAMS created a foundation for the development of CPGs, set up an independent appraisal organization, enacted regulations related to the appraisals, and trained appraisers. These efforts could enhance the ability of each individual medical society to develop CPGs, to increase the quality of the CPGs, and to ultimately improve the quality of the information available to decision-makers.

Standard-E hydrogen monitoring system shop acceptance test procedure

Energy Technology Data Exchange (ETDEWEB)

Schneider, T.C.

1997-10-02

The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

Standard-E hydrogen monitoring system shop acceptance test report

International Nuclear Information System (INIS)

Schneider, T.C.

1997-01-01

The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication

Standards of care and quality indicators for multidisciplinary care models for psoriatic arthritis in Spain.

Science.gov (United States)

Gratacós, Jordi; Luelmo, Jesús; Rodríguez, Jesús; Notario, Jaume; Marco, Teresa Navío; de la Cueva, Pablo; Busquets, Manel Pujol; Font, Mercè García; Joven, Beatriz; Rivera, Raquel; Vega, Jose Luis Alvarez; Álvarez, Antonio Javier Chaves; Parera, Ricardo Sánchez; Carrascosa, Jose Carlos Ruiz; Martínez, Fernando José Rodríguez; Sánchez, José Pardo; Olmos, Carlos Feced; Pujol, Conrad; Galindez, Eva; Barrio, Silvia Pérez; Arana, Ana Urruticoechea; Hergueta, Mercedes; Coto, Pablo; Queiro, Rubén

2018-06-01

To define and give priority to standards of care and quality indicators of multidisciplinary care for patients with psoriatic arthritis (PsA). A systematic literature review on PsA standards of care and quality indicators was performed. An expert panel of rheumatologists and dermatologists who provide multidisciplinary care was established. In a consensus meeting group, the experts discussed and developed the standards of care and quality indicators and graded their priority, agreement and also the feasibility (only for quality indicators) following qualitative methodology and a Delphi process. Afterwards, these results were discussed with 2 focus groups, 1 with patients, another with health managers. A descriptive analysis is presented. We obtained 25 standards of care (9 of structure, 9 of process, 7 of results) and 24 quality indicators (2 of structure, 5 of process, 17 of results). Standards of care include relevant aspects in the multidisciplinary care of PsA patients like an appropriate physical infrastructure and technical equipment, the access to nursing care, labs and imaging techniques, other health professionals and treatments, or the development of care plans. Regarding quality indicators, the definition of multidisciplinary care model objectives and referral criteria, the establishment of responsibilities and coordination among professionals and the active evaluation of patients and data collection were given a high priority. Patients considered all of them as important. This set of standards of care and quality indicators for the multidisciplinary care of patients with PsA should help improve quality of care in these patients.

SafeCare: An Innovative Approach for Improving Quality Through Standards, Benchmarking, and Improvement in Low- and Middle- Income Countries.

Science.gov (United States)

Johnson, Michael C; Schellekens, Onno; Stewart, Jacqui; van Ostenberg, Paul; de Wit, Tobias Rinke; Spieker, Nicole

2016-08-01

In low- and middle-income countries (LMICs), patients often have limited access to high-quality care because of a shortage of facilities and human resources, inefficiency of resource allocation, and limited health insurance. SafeCare was developed to provide innovative health care standards; surveyor training; a grading system for quality of care; a quality improvement process that is broken down into achievable, measurable steps to facilitate incremental improvement; and a private sector-supported health financing model. Three organizations-PharmAccess Foundation, Joint Commission International, and the Council for Health Service Accreditation of Southern Africa-launched SafeCare in 2011 as a formal partnership. Five SafeCare levels of improvement are allocated on the basis of an algorithm that incorporates both the overall score and weighted criteria, so that certain high-risk criteria need to be in place before a facility can move to the next SafeCare certification level. A customized quality improvement plan based on the SafeCare assessment results lists the specific, measurable activities that should be undertaken to address gaps in quality found during the initial assessment and to meet the nextlevel SafeCare certificate. The standards have been implemented in more than 800 primary and secondary facilities by qualified local surveyors, in partnership with various local public and private partner organizations, in six sub-Saharan African countries (Ghana, Kenya, Nigeria, Namibia, Tanzania, and Zambia). Expanding access to care and improving health care quality in LMICs will require a coordinated effort between institutions and other stakeholders. SafeCare's standards and assessment methodology can help build trust between stakeholders and lay the foundation for country-led quality monitoring systems.

Quality assurance in central nuclear power plant control systems. (Status report containing proposed enhancements for KTA rules)

International Nuclear Information System (INIS)

Gossner, S.

1985-01-01

All enterprises investigated observe the requirements laid down in KTA 1401. In most cases, the quality assurance systems and measures applied even go beyond the requirements of KTA 1401, especially in those enterprises working primarily for export and having to meet foreign quality assurance standards. Quality assurance measures in these enterprises are based primarily on 10 CFR 50, App.B and related rules and standards (e.g. ANSI N 54.2; NUREG 75/087). Internal quality assurance in these enterprises is organized on the basis of graphic flow diagrams which are even presented in the quality assurance manuals. These flow diagrams, in contrast to the German KTA rules, meet the international standards for quality assurance. KTA 1401 requirements not sufficiently met are, e.g. the operator audits with plant producers and unit and equipment producer audits with component producers. The report presents hints for improvements of the quality assurance concept in control systems engineering. (orig./HP) [de

Intelligent Transportation Systems : critical standards

Science.gov (United States)

1999-06-01

Intelligent Transportation Systems (ITS) standards are industry-consensus standards that provide the details about how different systems interconnect and communicate information to deliver the ITS user services described in the National ITS Architect...

Integrated Management System Incorporating Quality Management and Management of Environment, Health and Occupational Safety

International Nuclear Information System (INIS)

Manchev, B.; Nenkova, B.; Tomov, E.

2012-01-01

Risk Engineering Ltd is a Bulgarian private company founded in 1990 to provide engineering and consulting services applicable to each and every field of the energy sector. Since its establishment Risk Engineering Ltd develops, implement and apply a System for quality assurance, certified for the first time by BVQI (now Bureau Veritas Certification) in 1999 for conformity with the standard ISO 9001:1994. Later on, in connection with the revision of the standards of ISO 9000 series and introduction of the standard ISO 9001:2000 a Quality Management System in conformity with the standard ISO 9001:2000 was developed, introduced and certified. At present, Risk Engineering Ltd has got developed, documented, introduced and certified by Lloyd's Register Quality Assurance (LRQA) Quality Management System in compliance with ISO 9001:2008 on the process approach basis. On this basis and including the requirements of the ISO 14001:2004 (regarding the environment) and OHSAS 18001:2007 (regarding the health and occupational safety), Risk Engineering Ltd has developed and introduced Integrated Management System aim at achieving and demonstrating good results regarding protection of the environment, health and occupational safety. The processes under control by the Integrated Management System and applicable at the company are divided in two general types: A) Management processes: Strategic management and Management of the human resources. B) Processes describing the main activities: design/development process; project management; management of industrial projects and technical infrastructure project; construction, installation, repair and operation of power industry facilities; commercial activities and marketing; investigation of energy efficiency of industrial systems and certification of buildings regarding energy efficiency; consulting activity in the field of industry and energy as well as consultant in accordance with the Law of the Spatial Planning; management of the

The History of Infant Formula: Quality, Safety, and Standard Methods.

Science.gov (United States)

Wargo, Wayne F

2016-01-01

Food-related laws and regulations have existed since ancient times. Egyptian scrolls prescribed the labeling needed for certain foods. In ancient Athens, beer and wines were inspected for purity and soundness, and the Romans had a well-organized state food control system to protect consumers from fraud or bad produce. In Europe during the Middle Ages, individual countries passed laws concerning the quality and safety of eggs, sausages, cheese, beer, wine, and bread; some of these laws still exist today. But more modern dietary guidelines and food regulations have their origins in the latter half of the 19th century when the first general food laws were adopted and basic food control systems were implemented to monitor compliance. Around this time, science and food chemistry began to provide the tools to determine "purity" of food based primarily on chemical composition and to determine whether it had been adulterated in any way. Since the key chemical components of mammalian milk were first understood, infant formulas have steadily advanced in complexity as manufacturers attempt to close the compositional gap with human breast milk. To verify these compositional innovations and ensure product quality and safety, infant formula has become one of the most regulated foods in the world. The present paper examines the historical development of nutritional alternatives to breastfeeding, focusing on efforts undertaken to ensure the quality and safety from antiquity to present day. The impact of commercial infant formulas on global regulations is addressed, along with the resulting need for harmonized, fit-for-purpose, voluntary consensus standard methods.

The reliability-quality relationship for quality systems and quality risk management.

Science.gov (United States)

Claycamp, H Gregg; Rahaman, Faiad; Urban, Jason M

2012-01-01

Engineering reliability typically refers to the probability that a system, or any of its components, will perform a required function for a stated period of time and under specified operating conditions. As such, reliability is inextricably linked with time-dependent quality concepts, such as maintaining a state of control and predicting the chances of losses from failures for quality risk management. Two popular current good manufacturing practice (cGMP) and quality risk management tools, failure mode and effects analysis (FMEA) and root cause analysis (RCA) are examples of engineering reliability evaluations that link reliability with quality and risk. Current concepts in pharmaceutical quality and quality management systems call for more predictive systems for maintaining quality; yet, the current pharmaceutical manufacturing literature and guidelines are curiously silent on engineering quality. This commentary discusses the meaning of engineering reliability while linking the concept to quality systems and quality risk management. The essay also discusses the difference between engineering reliability and statistical (assay) reliability. The assurance of quality in a pharmaceutical product is no longer measured only "after the fact" of manufacturing. Rather, concepts of quality systems and quality risk management call for designing quality assurance into all stages of the pharmaceutical product life cycle. Interestingly, most assays for quality are essentially static and inform product quality over the life cycle only by being repeated over time. Engineering process reliability is the fundamental concept that is meant to anticipate quality failures over the life cycle of the product. Reliability is a well-developed theory and practice for other types of manufactured products and manufacturing processes. Thus, it is well known to be an appropriate index of manufactured product quality. This essay discusses the meaning of reliability and its linkages with quality

Development of standard practice guidelines for open and closed system suctioning.

Science.gov (United States)

Özden, Dilek; Görgülü, R Selma

2012-05-01

This study was carried out to determine the knowledge and practice of nurses before and after training and the development of standard practice guidelines for open and closed system suctioning methods in patients with endotracheal tubes. Many life-threatening complications can occur when a suctioning procedure is not performed with the correct technique. It has been reported that standard practice guidelines for suctioning are insufficient in clinical practice. Non-participant structured observational study. We assessed a total of 48 nurses who were employed in the cardiovascular surgery intensive care unit of a state hospital in Turkey. We used a questionnaire and nurse observation forms to assess the use of the open and closed system suctioning. There was a significant difference between the mean scores of the answers ('true', 'wrong' and 'I do not know') for the use of open and closed system suctioning before and after training. In addition, all steps of both suctioning procedures were carried out correctly during the third observation. The compliance of the nurses to the standard practice guidelines for open and closed suctioning and their knowledge levels on the subject were increased after training, while the implementation of standards was satisfactory. The development of open and closed system suctioning standard practice guidelines directly contributed to the enhancement of patient safety and the quality of nursing care. It is suggested that, as in other nursing care practices, suctioning should be carried out in accordance with standard practice guidelines, and health institutions should develop their standard practice guidelines and work in accordance with them. © 2012 Blackwell Publishing Ltd.

Revision of the ASME nuclear quality assurance standard and its historical background

International Nuclear Information System (INIS)

Suzuki, Tetsuya

2009-01-01

ASME NQA-1-2008 'Quality Assurance Requirements for Nuclear Facility Applications' will be endorsed by US NRC by the end of 2009. This standard will apply to design, construction and operation of nuclear power plants newly erected in USA. It is important to Japanese vendors developing nuclear business in USA. Historical background, significance of revision and main revised points of the ASME nuclear quality assurance standard are described in the present paper. (T. Tanaka)

Critical Factors Affecting the Quality of Industrialized Building System Projects in China

Directory of Open Access Journals (Sweden)

Yuanyan Gan

2017-02-01

Full Text Available Whilst the benefits of applying an industrialized building system (IBS have been well recognized globally in the construction industry, the application of IBS is particularly limited in developing countries such as China, and quality is considered one of the key issues affecting its application. This paper identifies a number of the key quality factors which present barriers to the promotion of IBS within the context of the Chinese construction industry. These include key factors such as “Inaccurate design of the connecting points between core components”, “Lack of design norms and standards for IBS components”, “Lack of quality criteria for IBS components”, “Lack of production norms and standards for IBS components”, “Lack of quality management system in production process”, and “Lack of technical guidelines for the construction of IBS projects”. The data used for analysis are derived from a comprehensive practical survey. The validity of the data is examined by using a statistical method. The findings from the study provide valuable references for formulating effective measures to mitigate the negative effects of these quality factors on IBS application in China, thereby ensuring that practice of the IBS system can be further developed within the country.

Cranial CT with 64-, 16-, 4- and single-slice CT systems-comparison of image quality and posterior fossa artifacts in routine brain imaging with standard protocols

Energy Technology Data Exchange (ETDEWEB)

Ertl-Wagner, Birgit; Eftimov, Lara; Becker, Christoph; Reiser, Maximilian [University of Munich, Grosshadern (Germany). Institute of Clinical Radiology; Blume, Jeffrey; Cormack, Jean [Brown University, Center for Statistical Sciences, Providence, RI (United States); Bruening, Roland; Brueckmann, Hartmut [University of Munich, Grosshadern (Germany). Department of Neuroradiology

2008-08-15

Posterior fossa artifacts constitute a characteristic limitation of cranial CT. To identify practical benefits and drawbacks of newer CT systems with reduced collimation in routine cranial imaging, we aimed to investigate image quality, posterior fossa artifacts and parenchymal delineation in non-enhanced CT (NECT) with 1-, 4-, 16- and 64-slice scanners using standard scan protocols. We prospectively enrolled 25 consecutive patients undergoing NECT on a 64-slice CT. Three groups with 25 patients having undergone NECT on 1-, 4- and 16-slice CT machines were matched regarding age and sex. Standard routine CT parameters were used on each CT system with helical acquisition in the posterior fossa; the parameters varied regarding collimation and radiation dose. Three blinded readers independently assessed the cases regarding image quality, infra- and supratentorial artifacts and delineation of brain parenchymal structures on a five-point ordinal scale. Reading orders were randomized. A proportional odds model that accounted for the correlated nature of the data was fit using generalized estimating equations. Posterior fossa artifacts were significantly reduced, and the delineation of infratentorial brain structures was significantly improved with the thinner collimation used for the newer CT systems (p<0.001). No significant differences were observed for midbrain structures (p>0.5). The thinner collimation available on modern CT systems leads to reduced posterior fossa artifacts and to a better delineation of brain parenchyma in the posterior fossa. (orig.)

Open Source, Open Standards, and Health Care Information Systems

Science.gov (United States)

2011-01-01

Recognition of the improvements in patient safety, quality of patient care, and efficiency that health care information systems have the potential to bring has led to significant investment. Globally the sale of health care information systems now represents a multibillion dollar industry. As policy makers, health care professionals, and patients, we have a responsibility to maximize the return on this investment. To this end we analyze alternative licensing and software development models, as well as the role of standards. We describe how licensing affects development. We argue for the superiority of open source licensing to promote safer, more effective health care information systems. We claim that open source licensing in health care information systems is essential to rational procurement strategy. PMID:21447469

Quality standards in 480 pancreatic resections: a prospective observational study

Directory of Open Access Journals (Sweden)

Francisco Javier Herrera-Cabezón

2015-03-01

Full Text Available Pancreatic resection is a standard procedure for the treatment of periampullary tumors. Morbidity and mortality are high, and quality standards are scarce in our setting. International classifications of complications (Clavien-Dindo and those specific for pancreatectomies (ISGPS allow adequate case comparisons. The goals of our work are to describe the morbidity and mortality of 480 pancreatectomies using the international classifications ISGPS and Clavien-Dindo to help establish a quality standard in our setting and to compare the results of CPD with reconstruction by pancreaticogastrostomy (1,55 versus 177 pancreaticojejunostomy. We report 480 resections including 337 duodenopancreatectomies, 116 distal pancreatectomies, 11 total pancreatectomies, 10 central pancreatectomies, and 6 enucleations. Results for duodenopancreatectomy include: 62 % morbidity (Clavien ≥ III 25.9 %, 12.3 % reinterventions, and 3.3 % overall mortality. For reconstruction by pancreaticojejunostomy: 71.2 % morbidity (Clavien ≥ III 34.4 %, 17.5 % reinterventions, and 3.3 % mortality. For reconstruction by pancreaticogastrostomy: 51 % morbidity (Clavien ≥ III 15.4%, 6.4 % reinterventions, and 3.2 % mortality. Differences are significant except for mortality. We conclude that our series meets quality criteria as compared to other groups. Reconstruction with pancreaticogastrostomy significantly reduces complication number and severity, as well as pancreatic fistula and reintervention rates.

Optimization of light quality from color mixing light-emitting diode systems for general lighting

Science.gov (United States)

Thorseth, Anders

2012-03-01

Given the problem of metamerisms inherent in color mixing in light-emitting diode (LED) systems with more than three distinct colors, a method for optimizing the spectral output of multicolor LED system with regards to standardized light quality parameters has been developed. The composite spectral power distribution from the LEDs are simulated using spectral radiometric measurements of single commercially available LEDs for varying input power, to account for the efficiency droop and other non-linear effects in electrical power vs. light output. The method uses electrical input powers as input parameters in a randomized steepest decent optimization. The resulting spectral power distributions are evaluated with regard to the light quality using the standard characteristics: CIE color rendering index, correlated color temperature and chromaticity distance. The results indicate Pareto optimal boundaries for each system, mapping the capabilities of the simulated lighting systems with regard to the light quality characteristics.

Constructing Assessment Model of Primary and Secondary Educational Quality with Talent Quality as the Core Standard

Science.gov (United States)

Chen, Benyou

2014-01-01

Quality is the core of education and it is important to standardization construction of primary and secondary education in urban (U) and rural (R) areas. The ultimate goal of the integration of urban and rural education is to pursuit quality urban and rural education. Based on analysing the related policy basis and the existing assessment models…

Quality management system for the disposal of low and medium levels radioactive wastes - RBMN

Energy Technology Data Exchange (ETDEWEB)

Azevedo, Antonio Mario P.; Haucz, Maria Judite A.; Fraga, Rosane Rodrigues, E-mail: ampa@cdtn.br, E-mail: hauczmj@cdtn.br, E-mail: rosaner@cdtn.br [Centro de Desenvolvimento de Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2011-07-01

This article compares the standards applied in quality and safety management systems for the Disposal of Radioactive Waste. The comparison will be a contribution to development, maintenance and improvement the safety and quality system of a disposal of low and medium radioactive waste (RBMN) coordinated by CDTN - Brazilian Development Center for Nuclear Technology). (author)

Quality management system for the disposal of low and medium levels radioactive wastes - RBMN

International Nuclear Information System (INIS)

Azevedo, Antonio Mario P.; Haucz, Maria Judite A.; Fraga, Rosane Rodrigues

2011-01-01

This article compares the standards applied in quality and safety management systems for the Disposal of Radioactive Waste. The comparison will be a contribution to development, maintenance and improvement the safety and quality system of a disposal of low and medium radioactive waste (RBMN) coordinated by CDTN - Brazilian Development Center for Nuclear Technology). (author)

The health benefits of attaining and strengthening air quality standards in Cape Town

Directory of Open Access Journals (Sweden)

Samantha Keen

2016-12-01

Full Text Available The link between pollution and poor health and mortality has been established globally. Developing countries carry most of the burden of ill health from air pollution, and urban centres like the City of Cape Town even more so. Effective air quality management to protect human health relies on the attainment of air quality standards. This study uses the Benefits Mapping and Analysis Program (BenMAP along with a locally derived exposure-response function and air quality monitor data to investigate whether the consistent attainment of current or more stringent air quality standards would avoid loss of life. The results show that attaining the PM10 24-hour mean South Africa National Standard limit and the PM10 and SO2 24-hour mean World Health Organisation guidelines in Cape Town reduces levels of pollutants and does reduce excess risk of mortality in Cape Town.

A Risk and Standards Based Approach to Quality Assurance in Australia's Diverse Higher Education Sector

Science.gov (United States)

Australian Government Tertiary Education Quality and Standards Agency, 2015

2015-01-01

The Australian Government Tertiary Education Quality and Standards Agency's (TEQSA's) role is to assure that quality standards are being met by all registered higher education providers. This paper explains how TEQSA's risk-based approach to assuring higher education standards is applied in broad terms to a diverse sector. This explanation is…

75 FR 4173 - Water Quality Standards for the State of Florida's Lakes and Flowing Waters

Science.gov (United States)

2010-01-26

... Part III Environmental Protection Agency 40 CFR Part 131 Water Quality Standards for the State of...-HQ-OW-2009-0596; FRL-9105-1] RIN 2040-AF11 Water Quality Standards for the State of Florida's Lakes... Environmental Protection Agency (EPA) is proposing numeric nutrient water quality criteria to protect aquatic...

Electronic laboratory quality assurance program: A method of enhancing the prosthodontic curriculum and addressing accreditation standards.

Science.gov (United States)

Moghadam, Marjan; Jahangiri, Leila

2015-08-01

An electronic quality assurance (eQA) program was developed to replace a paper-based system and to address standards introduced by the Commission on Dental Accreditation (CODA) and to improve educational outcomes. This eQA program provides feedback to predoctoral dental students on prosthodontic laboratory steps at New York University College of Dentistry. The purpose of this study was to compare the eQA program of performing laboratory quality assurance with the former paper-based format. Fourth-year predoctoral dental students (n=334) who experienced both the paper-based and the electronic version of the quality assurance program were surveyed about their experiences. Additionally, data extracted from the eQA program were analyzed to identify areas of weakness in the curriculum. The study findings revealed that 73.8% of the students preferred the eQA program to the paper-based version. The average number of treatments that did not pass quality assurance standards was 119.5 per month. This indicated a 6.34% laboratory failure rate. Further analysis of these data revealed that 62.1% of the errors were related to fixed prosthodontic treatment, 27.9% to partial removable dental prostheses, and 10% to complete removable dental prostheses in the first 18 months of program implementation. The eQA program was favored by dental students who have experienced both electronic and paper-based versions of the system. Error type analysis can yield the ability to create customized faculty standardization sessions and refine the didactic and clinical teaching of the predoctoral students. This program was also able to link patient care activity with the student's laboratory activities, thus addressing the latest requirements of the CODA regarding the competence of graduates in evaluating laboratory work related to their patient care. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Using Quality Management Systems to Improve Test Development and Standards and to Promote Good Practice: A Case Study of Testing Italian as a Foreign Language

Science.gov (United States)

Grego Bolli, Giuliana

2014-01-01

This article discusses the problem of quality in the production of language tests in the context of Italian language examinations. The concept of quality is closely related to the application of stated standards and related procedures. These standards, developed over the last thirty years, are mainly related to the concepts of the accountability…

Asan medical information system for healthcare quality improvement.

Science.gov (United States)

Ryu, Hyeon Jeong; Kim, Woo Sung; Lee, Jae Ho; Min, Sung Woo; Kim, Sun Ja; Lee, Yong Su; Lee, Young Ha; Nam, Sang Woo; Eo, Gi Seung; Seo, Sook Gyoung; Nam, Mi Hyun

2010-09-01

This purpose of this paper is to introduce the status of the Asan Medical Center (AMC) medical information system with respect to healthcare quality improvement. Asan Medical Information System (AMIS) is projected to become a completely electronic and digital information hospital. AMIS has played a role in improving the health care quality based on the following measures: safety, effectiveness, patient-centeredness, timeliness, efficiency, privacy, and security. AMIS CONSISTED OF SEVERAL DISTINCTIVE SYSTEMS: order communication system, electronic medical record, picture archiving communication system, clinical research information system, data warehouse, enterprise resource planning, IT service management system, and disaster recovery system. The most distinctive features of AMIS were the high alert-medication recognition & management system, the integrated and severity stratified alert system, the integrated patient monitoring system, the perioperative diabetic care monitoring and support system, and the clinical indicator management system. AMIS provides IT services for AMC, 7 affiliated hospitals and over 5,000 partners clinics, and was developed to improve healthcare services. The current challenge of AMIS is standard and interoperability. A global health IT strategy is needed to get through the current challenges and to provide new services as needed.

Requirements for a quality measurement instrument for semantic standards

NARCIS (Netherlands)

Folmer, E.J.A.; Krukkert, D.; Oude Luttighuis, P.; Hillegersberg van, J. van

2010-01-01

This study describes requirements for an instrument to measure the quality of semantic standards. A situational requirements engineering method was used, resulting in a goal-tree in which requirements are structured. This structure shows requirements related to the input of the instrument; stating

Small drinking water systems under spatiotemporal water quality variability: a risk-based performance benchmarking framework.

Science.gov (United States)

Bereskie, Ty; Haider, Husnain; Rodriguez, Manuel J; Sadiq, Rehan

2017-08-23

Traditional approaches for benchmarking drinking water systems are binary, based solely on the compliance and/or non-compliance of one or more water quality performance indicators against defined regulatory guidelines/standards. The consequence of water quality failure is dependent on location within a water supply system as well as time of the year (i.e., season) with varying levels of water consumption. Conventional approaches used for water quality comparison purposes fail to incorporate spatiotemporal variability and degrees of compliance and/or non-compliance. This can lead to misleading or inaccurate performance assessment data used in the performance benchmarking process. In this research, a hierarchical risk-based water quality performance benchmarking framework is proposed to evaluate small drinking water systems (SDWSs) through cross-comparison amongst similar systems. The proposed framework (R WQI framework) is designed to quantify consequence associated with seasonal and location-specific water quality issues in a given drinking water supply system to facilitate more efficient decision-making for SDWSs striving for continuous performance improvement. Fuzzy rule-based modelling is used to address imprecision associated with measuring performance based on singular water quality guidelines/standards and the uncertainties present in SDWS operations and monitoring. This proposed R WQI framework has been demonstrated using data collected from 16 SDWSs in Newfoundland and Labrador and Quebec, Canada, and compared to the Canadian Council of Ministers of the Environment WQI, a traditional, guidelines/standard-based approach. The study found that the R WQI framework provides an in-depth state of water quality and benchmarks SDWSs more rationally based on the frequency of occurrence and consequence of failure events.

[Management of quality in an Intensive Care Unit: implementation of ISO 9001:2008 international standard].

Science.gov (United States)

Lorenzo Torrent, R; Sánchez Palacios, M; Santana Cabrera, L; Cobian Martinez, J L; García del Rosario, C

2010-10-01

The Quality Management Systems make it possible to prioritize actions to maintain the safety and efficacy of health technologies. The Intensive Care Unit of our hospital has implemented a quality management plan, which has obtained accreditation as "Service Certificate that manages its activities according to UNE-EN ISO 9001:2008" standard. With the application of quality management system, it has been possible to detect the needs that the Service can cover in order to obtain the satisfaction of the patient, relative or health personnel of the other services of the hospital, to improve communications inside and outside of service, to secure greater understanding of the processes of the organization and control of risk, to delimit responsibilities clearly to all the personnel, to make better use of the time and resources and, finally, to improve the motivation of the personnel. Copyright © 2009 Elsevier España, S.L. y SEMICYUC. All rights reserved.

Quality control of calibration system for area monitors at National Laboratory of Metrology from Ionizing Radiations (LNMRI)

International Nuclear Information System (INIS)

Ramos, M.M.O.; Freitas, L.C. de

1992-01-01

The quality control of equipment used in calibration from the National Laboratory of Metrology on Ionizing Radiations is presented, with results of standard measure systems and irradiation system. Tables and graphics with the quality of systems are also shown. (C.G.C.)

A cross-platform survey of CT image quality and dose from routine abdomen protocols and a method to systematically standardize image quality

International Nuclear Information System (INIS)

Favazza, Christopher P; Duan, Xinhui; Zhang, Yi; Yu, Lifeng; Leng, Shuai; Kofler, James M; Bruesewitz, Michael R; McCollough, Cynthia H

2015-01-01

Through this investigation we developed a methodology to evaluate and standardize CT image quality from routine abdomen protocols across different manufacturers and models. The influence of manufacturer-specific automated exposure control systems on image quality was directly assessed to standardize performance across a range of patient sizes. We evaluated 16 CT scanners across our health system, including Siemens, GE, and Toshiba models. Using each practice’s routine abdomen protocol, we measured spatial resolution, image noise, and scanner radiation output (CTDI vol ). Axial and in-plane spatial resolutions were assessed through slice sensitivity profile (SSP) and modulation transfer function (MTF) measurements, respectively. Image noise and CTDI vol values were obtained for three different phantom sizes. SSP measurements demonstrated a bimodal distribution in slice widths: an average of 6.2  ±  0.2 mm using GE’s ‘Plus’ mode reconstruction setting and 5.0  ±  0.1 mm for all other scanners. MTF curves were similar for all scanners. Average spatial frequencies at 50%, 10%, and 2% MTF values were 3.24  ±  0.37, 6.20  ±  0.34, and 7.84  ±  0.70 lp cm −1 , respectively. For all phantom sizes, image noise and CTDI vol varied considerably: 6.5–13.3 HU (noise) and 4.8–13.3 mGy (CTDI vol ) for the smallest phantom; 9.1–18.4 HU and 9.3–28.8 mGy for the medium phantom; and 7.8–23.4 HU and 16.0–48.1 mGy for the largest phantom. Using these measurements and benchmark SSP, MTF, and image noise targets, CT image quality can be standardized across a range of patient sizes. (paper)

A cross-platform survey of CT image quality and dose from routine abdomen protocols and a method to systematically standardize image quality.

Science.gov (United States)

Favazza, Christopher P; Duan, Xinhui; Zhang, Yi; Yu, Lifeng; Leng, Shuai; Kofler, James M; Bruesewitz, Michael R; McCollough, Cynthia H

2015-11-07

Through this investigation we developed a methodology to evaluate and standardize CT image quality from routine abdomen protocols across different manufacturers and models. The influence of manufacturer-specific automated exposure control systems on image quality was directly assessed to standardize performance across a range of patient sizes. We evaluated 16 CT scanners across our health system, including Siemens, GE, and Toshiba models. Using each practice's routine abdomen protocol, we measured spatial resolution, image noise, and scanner radiation output (CTDIvol). Axial and in-plane spatial resolutions were assessed through slice sensitivity profile (SSP) and modulation transfer function (MTF) measurements, respectively. Image noise and CTDIvol values were obtained for three different phantom sizes. SSP measurements demonstrated a bimodal distribution in slice widths: an average of 6.2  ±  0.2 mm using GE's 'Plus' mode reconstruction setting and 5.0  ±  0.1 mm for all other scanners. MTF curves were similar for all scanners. Average spatial frequencies at 50%, 10%, and 2% MTF values were 3.24  ±  0.37, 6.20  ±  0.34, and 7.84  ±  0.70 lp cm(-1), respectively. For all phantom sizes, image noise and CTDIvol varied considerably: 6.5-13.3 HU (noise) and 4.8-13.3 mGy (CTDIvol) for the smallest phantom; 9.1-18.4 HU and 9.3-28.8 mGy for the medium phantom; and 7.8-23.4 HU and 16.0-48.1 mGy for the largest phantom. Using these measurements and benchmark SSP, MTF, and image noise targets, CT image quality can be standardized across a range of patient sizes.

Development of the supply chain oriented quality assurance system for aerospace manufacturing SMEs and its implementation perspectives

Science.gov (United States)

Hussein, Abdullahi; Cheng, Kai

2016-10-01

Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard (BS/EN9100) is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps further evaluate and validate the approach and application system development.

Standard review plan for the review of environmental restoration remedial action quality assurance program plans

International Nuclear Information System (INIS)

1991-09-01

This plan establishes both the scope of the review and the acceptance criteria to be utilized for the review of Quality Assurance Program Plans (QAPPs) developed in accordance with the requirements of DOE/RL-90-28. DOE/RL-90-28, the Environmental Restoration Remedial Action Quality Assurance Requirements Document (QARD) defines all quality assurance (QA) requirements governing activities that affect the quality of the Environmental Restoration Remedial Action (ERRA) program at the Hanford Site. These requirements are defined in three parts, Part 1 of Quality Management and Administration tasks, Part 2 for Environmental Data Operations, and Part 3 of the Design and Construction of items, systems, and facilities. The purpose of this document is to identify the scope of the review by the DOE Field Office, Richland staff, and establish the acceptance criteria (Parts 1, 2, and 3) that the DOE Field Office, Richland staff will utilize to evaluate the participant QAPPs. Use of the standard review plan will (1) help ensure that participant QAPPs contain the information required by DOE/RL-90-28, (2) aid program participant and DOE Field Office, Richland staff is ensuring that the information describing the participant's QAPP is complete, (3) help persons regarding DOE/RL- 90-28 to locate information, and (4) contribute to decreasing the time needed for the review process. In addition, the Standard Review Plan (SRP) ensures the quality and uniformity of the staff reviews and presents a well-defined base from which to evaluate compliance of participant quality programs against DOE/RL-90-28

Carbon finance and pro-poor co-benefits: The Gold Standard and Climate, Community and Biodiversity Standards

Energy Technology Data Exchange (ETDEWEB)

Wood, Rachel

2011-04-15

This paper assesses the practical contribution of the Gold Standard (GS) and Climate Community and Biodiversity (CCB) Standards to local development through the identification of high quality carbon offset projects and ensuring high standards of consultation with local communities during project development and implementation. It is based on desk research, involving analysis of the GS and CCB Standards' project databases, project design documents, and secondary literature. In addition, over 20 representatives of the two standards systems, project developers, NGO representatives, and researchers were interviewed. The paper concludes that both standard systems successfully reward high quality projects which have a demonstrated commitment to local consultations and sustainable development benefits. Moreover, they serve to give well-meaning project developers frameworks with which to ensure that a wide range of criteria are considered in planning and implementing projects. As voluntary standards, it is unrealistic to expect either the GS or CCB Standards to improve poor-quality or unsustainable projects.

Carbon finance and pro-poor co-benefits: The Gold Standard and Climate, Community and Biodiversity Standards

Energy Technology Data Exchange (ETDEWEB)

Wood, Rachel

2011-04-15

This paper assesses the practical contribution of the Gold Standard (GS) and Climate Community and Biodiversity (CCB) Standards to local development through the identification of high quality carbon offset projects and ensuring high standards of consultation with local communities during project development and implementation. It is based on desk research, involving analysis of the GS and CCB Standards' project databases, project design documents, and secondary literature. In addition, over 20 representatives of the two standards systems, project developers, NGO representatives, and researchers were interviewed. The paper concludes that both standard systems successfully reward high quality projects which have a demonstrated commitment to local consultations and sustainable development benefits. Moreover, they serve to give well-meaning project developers frameworks with which to ensure that a wide range of criteria are considered in planning and implementing projects. As voluntary standards, it is unrealistic to expect either the GS or CCB Standards to improve poor-quality or unsustainable projects.

Computer systems and software description for Standard-E+ Hydrogen Monitoring System (SHMS-E+)

International Nuclear Information System (INIS)

Tate, D.D.

1997-01-01

The primary function of the Standard-E+ Hydrogen Monitoring System (SHMS-E+) is to determine tank vapor space gas composition and gas release rate, and to detect gas release events. Characterization of the gas composition is needed for safety analyses. The lower flammability limit, as well as the peak burn temperature and pressure, are dependent upon the gas composition. If there is little or no knowledge about the gas composition, safety analyses utilize compositions that yield the worst case in a deflagration or detonation. Knowledge of the true composition could lead to reductions in the assumptions and therefore there may be a potential for a reduction in controls and work restrictions. Also, knowledge of the actual composition will be required information for the analysis that is needed to remove tanks from the Watch List. Similarly, the rate of generation and release of gases is required information for performing safety analyses, developing controls, designing equipment, and closing safety issues. This report outlines the computer system design layout description for the Standard-E+ Hydrogen Monitoring System

The importance of standardized observations to evaluate nutritional care quality in the survey process.

Science.gov (United States)

Schnelle, John F; Bertrand, Rosanna; Hurd, Donna; White, Alan; Squires, David; Feuerberg, Marvin; Hickey, Kelly; Simmons, Sandra F

2009-10-01

Guidelines written for government surveyors who assess nursing home (NH) compliance with federal standards contain instructions to observe the quality of mealtime assistance. However, these instructions are vague and no protocol is provided for surveyors to record observational data. This study compared government survey staff observations of mealtime assistance quality to observations by research staff using a standardized protocol that met basic standards for accurate behavioral measurement. Survey staff used either the observation instructions in the standard survey process or those written for the revised Quality Improvement Survey (QIS). Trained research staff observed mealtime care in 20 NHs in 5 states during the same time period that survey staff evaluated care in the same facilities, although it could not be determined if survey and research staff observed the same residents during the same meals. Ten NHs were evaluated by government surveyors using the QIS survey instructions and 10 NHs were evaluated by surveyors using the standard survey instructions. Research staff observations using a standardized observation protocol identified a higher proportion of residents receiving inadequate feeding assistance during meals relative to survey staff using either the standard or QIS survey instructions. For example, more than 50% of the residents who ate less than half of their meals based on research staff observation were not offered an alternative to the served meal, and the lack of alternatives, or meal substitutions, was common in all 20 NHs. In comparison, the QIS survey teams documented only 2 instances when meal substitutes were not offered in 10 NHs and the standard survey teams documented no instances in 10 NHs. Standardized mealtime observations by research staff revealed feeding assistance care quality issues in all 20 study NHs. Surveyors following the instructions in either the standard or revised QIS surveys did not detect most of these care quality

On development of system for environmental monitoring of atmospheric air quality

Directory of Open Access Journals (Sweden)

М. В. Волкодаева

2017-10-01

Full Text Available The article suggests the directions for development of the system of environmental monitoring of atmospheric air quality in the Russian Federation, namely: an increase in the number of stationary control posts for atmospheric pollution in each specific city; expansion of the list of cities where constant measurements of pollutant concentrations are conducted; expansion of the list of controlled impurities through the introduction of automated air quality monitoring systems, the development of computational methods for monitoring air quality, including not only information on pollution levels in terms of compliance with hygienic standards, but also assessment of pollution levels from the perspective of environmental risk to the health of the population. There is a great sensitivity of plants to the low quality of atmospheric air in comparison with the sensitivity of animals and humans. The air quality standards for vegetation are given. It is proposed to evaluate the quality of atmospheric air not only from the point of view of the impact on human health, but taking into account the impact on vegetation, to include in the program route observations carried out by mobile atmospheric air monitoring laboratories, territories with public green areas, which will increase the information content of atmospheric air monitoring and the state of green spaces. In connection with the increasing noise level in large cities and the lack of a permanent noise monitoring system, it is proposed to equip existing and new monitoring stations with noise level meters to provide reliable information for the development of relevant environmental measures.

Development of an image processing system in splendid squid quality classification

Science.gov (United States)

Masunee, Niyada; Chaiprapat, Supapan; Waiyagan, Kriangkrai

2013-07-01

Agricultural products typically exhibit high variance in quality characteristics. To assure customer satisfaction and control manufacturing productivity, quality classification is necessary to screen off defective items and to grade the products. This article presents an application of image processing techniques on squid grading and defect discrimination. A preliminary study indicated that surface color was an efficient determinant to justify quality of splendid squids. In this study, a computer vision system (CVS) was developed to examine the characteristics of splendid squids. Using image processing techniques, squids could be classified into three different quality grades as in accordance with an industry standard. The developed system first sifted through squid images to reject ones with black marks. Qualified squids were graded on a proportion of white, pink, and red regions appearing on their bodies by using fuzzy logic. The system was evaluated on 100 images of squids at different quality levels. It was found that accuracy obtained by the proposed technique was 95% compared with sensory evaluation of an expert.

The Relationship between Social Capital and Quality Management Systems in European Hospitals: A Quantitative Study

Science.gov (United States)

Hammer, Antje; Arah, Onyebuchi A.; DerSarkissian, Maral; Thompson, Caroline A.; Mannion, Russell; Wagner, Cordula; Ommen, Oliver; Sunol, Rosa; Pfaff, Holger

2013-01-01

Background Strategic leadership is an important organizational capability and is essential for quality improvement in hospital settings. Furthermore, the quality of leadership depends crucially on a common set of shared values and mutual trust between hospital management board members. According to the concept of social capital, these are essential requirements for successful cooperation and coordination within groups. Objectives We assume that social capital within hospital management boards is an important factor in the development of effective organizational systems for overseeing health care quality. We hypothesized that the degree of social capital within the hospital management board is associated with the effectiveness and maturity of the quality management system in European hospitals. Methods We used a mixed-method approach to data collection and measurement in 188 hospitals in 7 European countries. For this analysis, we used responses from hospital managers. To test our hypothesis, we conducted a multilevel linear regression analysis of the association between social capital and the quality management system score at the hospital level, controlling for hospital ownership, teaching status, number of beds, number of board members, organizational culture, and country clustering. Results The average social capital score within a hospital management board was 3.3 (standard deviation: 0.5; range: 1-4) and the average hospital score for the quality management index was 19.2 (standard deviation: 4.5; range: 0-27). Higher social capital was associated with higher quality management system scores (regression coefficient: 1.41; standard error: 0.64, p=0.029). Conclusion The results suggest that a higher degree of social capital exists in hospitals that exhibit higher maturity in their quality management systems. Although uncontrolled confounding and reverse causation cannot be completely ruled out, our new findings, along with the results of previous research, could

Physical image quality of computed radiography in mammography system

International Nuclear Information System (INIS)

Norriza Mohd Isa; Muhammad Jamal Isa; Wan Muhamad Saridan Wan Hassan; Fatimah Othman

2013-01-01

Full-text: Mammography is a screening procedure that mostly used for early detection of breast cancer. In digital imaging system, Computed Radiography is a cost-effective technology that applied indirect conversion detector. The paper presents physical image quality parameter measurements namely modulation transfer function (MTF), normalized noise power spectrum (NNPS) and detective quantum efficiency (DQE) of Computed Radiography in mammography system. MTF was calculated from two different orientations of slanted images of an edge test device and NNPS was estimated using flat-field image. Both images were acquired using a standard mammography beam quality. DQE was determined by applying the MTF and NNPS values into our developed software program. Both orientations have similar DQE characteristics. (author)

Building Standards based Science Information Systems: A Survey of ISO and other standards

Science.gov (United States)

King, Todd; Walker, Raymond

Science Information systems began with individual researchers maintaining personal collec-tions of data and managing them by using ad hoc, specialized approaches. Today information systems are an enterprise consisting of federated systems that manage and distribute both historical and contemporary data from distributed sources. Information systems have many components. Among these are metadata models, metadata registries, controlled vocabularies and ontologies which are used to describe entities and resources. Other components include services to exchange information and data; tools to populate the system and tools to utilize available resources. When constructing information systems today a variety of standards can be useful. The benefit of adopting standards is clear; it can shorten the design cycle, enhance software reuse and enable interoperability. We look at standards from the International Stan-dards Organization (ISO), International Telecommunication Union (ITU), Organization for the Advancement of Structured Information Standards (OASIS), Internet Engineering Task Force (IETF), American National Standards Institute (ANSI) which have influenced the develop-ment of information systems in the Heliophysics and Planetary sciences. No standard can solve the needs of every community. Individual disciplines often must fill the gap between general purpose standards and the unique needs of the discipline. To this end individual science dis-ciplines are developing standards, Examples include the International Virtual Observatory Al-liance (IVOA), Planetary Data System (PDS)/ International Planetary Data Alliance (IPDA), Dublin-Core Science, and the Space Physics Archive Search and Extract (SPASE) consortium. This broad survey of ISO and other standards provides some guidance for the development information systems. The development of the SPASE data model is reviewed and provides some insights into the value of applying appropriate standards and is used to illustrate

Importance of implementing an analytical quality control system in a core laboratory.

Science.gov (United States)

Marques-Garcia, F; Garcia-Codesal, M F; Caro-Narros, M R; Contreras-SanFeliciano, T

2015-01-01

The aim of the clinical laboratory is to provide useful information for screening, diagnosis and monitoring of disease. The laboratory should ensure the quality of extra-analytical and analytical process, based on set criteria. To do this, it develops and implements a system of internal quality control, designed to detect errors, and compare its data with other laboratories, through external quality control. In this way it has a tool to detect the fulfillment of the objectives set, and in case of errors, allowing corrective actions to be made, and ensure the reliability of the results. This article sets out to describe the design and implementation of an internal quality control protocol, as well as its periodical assessment intervals (6 months) to determine compliance with pre-determined specifications (Stockholm Consensus(1)). A total of 40 biochemical and 15 immunochemical methods were evaluated using three different control materials. Next, a standard operation procedure was planned to develop a system of internal quality control that included calculating the error of the analytical process, setting quality specifications, and verifying compliance. The quality control data were then statistically depicted as means, standard deviations, and coefficients of variation, as well as systematic, random, and total errors. The quality specifications were then fixed and the operational rules to apply in the analytical process were calculated. Finally, our data were compared with those of other laboratories through an external quality assurance program. The development of an analytical quality control system is a highly structured process. This should be designed to detect errors that compromise the stability of the analytical process. The laboratory should review its quality indicators, systematic, random and total error at regular intervals, in order to ensure that they are meeting pre-determined specifications, and if not, apply the appropriate corrective actions

Quality assurance system in gamma spectrometry laboratory

International Nuclear Information System (INIS)

Mielnikow, A.; Michalik, B.; Chalupnik, S.; Lebecka, J.

1996-01-01

On basis of guidelines for development of QUALITY SYSTEM for a testing laboratory (European Standard Series EN 45000) a quality assurance system was implemented in gamma spectroscopy laboratory, where routine measurements of natural (mainly Ra-226, Ra-228, Ra-224, K-40) and artificial (mainly Cs-137 and Cs-134) isotopes are performed. We measure a variety of samples, but mainly coal, vaste rock, ashe, deposits, vegetation and air filters. Laboratory of gamma spectroscopy in Central Mining Institute has three HPGe detectors. There is one coaxial detector with 45% relative efficiency, one detector for low energy region and one detector with extended range). We have also two Ge(Li) detectors from former Czechoslovakia. Shielding is made mainly of steel (40 cm) with the interior covered with lead and copper. The electronics and software (Genie-PC) was bought at 'Canberra' and 'Silena'. The paper describes not only the system of quality assurance but also main problems met by its implementation and results of intercomparison measurements. The QAS has been introduced in 1992. In 1993 the Accreditation Certificate of Testing Laboratory for our Laboratory has been obtained from the Polish Bureau of Research and Certification as a fifth laboratory in Poland. (author)

Acidic precipitation: considerations for an air-quality standard

Energy Technology Data Exchange (ETDEWEB)

Evans, L.S.; Hendrey, G.R.; Stensland, G.J.; Johnson, D.W.; Francis, A.J.

1980-01-01

Acidic precipitation, wet or frozen deposition with a hydrogen ion concentration greatern than 2.5 ..mu..eq l/sup -1/ is a significant air pollution problem in the United States. The chief anions accounting for the hydrogen ions in rainfall are nitrate and sulfate. Agricultural systems are more likely to derive net nutritional benefits from increasing inputs of acidic rain than are forest systems when soils alone are considered. Agricultural soils may benefit because of the high N and S requirements of agricultural plants. Detrimental effects to forest soils may result if atmospheric H/sup +/ inputs significantly add to or exceed H/sup +/ production by soils. Acidification of fresh waters of southern Scandinavia, southwestern Scotland, southeastern Canada, and northeastern United States is caused by acid deposition. Areas of these regions in which this acidification occurs have in common, highly acidic precipitation with volume weighted mean annual H/sup +/ concentrations of 25 ..mu..eq l/sup -1/ or higher and slow weathering granitic or precambrian bedrock with thin soils deficient in minerals which would provide buffer capacity. Biological effects of acidification of fresh waters are detectable below pH 6.0. As lake and stream pH levels decrease below pH. 6.0, many species of plants, invertebrates, and vertebrates are progressively eliminated. Generally, fisheries are impacted below pH 5.0 and are completely destroyed below pH 4.8. There are few studies that document effects of acidic precipitation on terrestrial vegetation to establish an air quality standard. It must be demonstrated that current levels of precipitation acidity alone significantly injure terrestrial vegetation. In terms of documented damanges, current research indicates that establishing a standard for precipitation for the volume weighted annual H/sup +/ concentration at 25 ..mu..eq l/sup -1/ may protect the most sensitive areas from permanent lake acidification.

Analysis of the quality of hospital information systems Audit Trails.

Science.gov (United States)

Cruz-Correia, Ricardo; Boldt, Isabel; Lapão, Luís; Santos-Pereira, Cátia; Rodrigues, Pedro Pereira; Ferreira, Ana Margarida; Freitas, Alberto

2013-08-06

Audit Trails (AT) are fundamental to information security in order to guarantee access traceability but can also be used to improve Health information System's (HIS) quality namely to assess how they are used or misused. This paper aims at analysing the existence and quality of AT, describing scenarios in hospitals and making some recommendations to improve the quality of information. The responsibles of HIS for eight Portuguese hospitals were contacted in order to arrange an interview about the importance of AT and to collect audit trail data from their HIS. Five institutions agreed to participate in this study; four of them accepted to be interviewed, and four sent AT data. The interviews were performed in 2011 and audit trail data sent in 2011 and 2012. Each AT was evaluated and compared in relation to data quality standards, namely for completeness, comprehensibility, traceability among others. Only one of the AT had enough information for us to apply a consistency evaluation by modelling user behaviour. The interviewees in these hospitals only knew a few AT (average of 1 AT per hospital in an estimate of 21 existing HIS), although they all recognize some advantages of analysing AT. Four hospitals sent a total of 7 AT - 2 from Radiology Information System (RIS), 2 from Picture Archiving and Communication System (PACS), 3 from Patient Records. Three of the AT were understandable and three of the AT were complete. The AT from the patient records are better structured and more complete than the RIS/PACS. Existing AT do not have enough quality to guarantee traceability or be used in HIS improvement. Its quality reflects the importance given to them by the CIO of healthcare institutions. Existing standards (e.g. ASTM:E2147, ISO/TS 18308:2004, ISO/IEC 27001:2006) are still not broadly used in Portugal.

The Impact of ISO Quality Management Systems on Primary and Secondary Schools in Spain

Science.gov (United States)

Arribas Díaz, Jorge Antonio; Martínez-Mediano, Catalina

2018-01-01

Purpose: The purpose of this study is to evaluate the application of quality management systems (QMS) based on international standards of quality in education (ISO 9001:2008) and ascertain the influence of this quality model on primary and secondary schools in Spain. Design/methodology/approach: The study was conducted in 26 publicly funded,…

The negotiation of quality standards: A social interactionists approach to fruit and vegetable distribution in Argentina

NARCIS (Netherlands)

Arce, A.M.G.; Viteri, M.L.

2013-01-01

This article addresses food quality standards. It suggests that writing on standards creates a flat view of the subject, failing to grasp the richness of the multiple self-organizing practices that shape quality within functioning markets. The article documents the social dimension of quality and

Quality between mechanical compression on reducible stretcher versus manual compression on standard stretcher in small elevator.

Science.gov (United States)

Kim, Tae Han; Hong, Ki Jeong; Sang Do, Shin; Kim, Chu Hyun; Song, Sung Wook; Song, Kyoung Jun; Ro, Young Sun; Ahn, Ki Ok; Jang, Dayea Beatrice

2016-08-01

Manual cardiopulmonary resuscitation (CPR) during vertical transport in small elevators using standard stretcher for out-of-hospital cardiac arrest can raise concerns with diminishing quality. Mechanical CPR on a reducible stretcher (RS-CPR) that can be shortened in the length was tested to compare the CPR quality with manual CPR on a standard stretcher (SS-CPR). A randomized crossover manikin simulation was designed. Three teams of emergency medical technicians were recruited to perform serial CPR simulations using two different protocols (RS-CPR and SS-CPR) according to a randomization; the first 6 minutes of manual CPR at the scene was identical for both scenarios and two different protocols during vertical transport in a small elevator followed on a basis of cross-over assignment. The LUCAS-2 Chest Compression System (Zolife AB, Lund, Sweden) was used for RS-CPR. CPR quality was measured using a resuscitation manikin (Resusci Anne QCPR, Laerdal Medical, Stavanger, Norway) in terms of no flow fraction, compression depth, and rate (median and IQR). A total of 42 simulations were analyzed. CPR quality did not differ significantly at the scene. No flow fraction (%) was significantly lower when the stretcher was moving in RS-CPR then SS-CPR (36.0 (33.8-38.7) vs 44.0 (36.8-54.4), P< .01). RS-CPR showed significantly better quality than SS-CPR; 93.2 (50.6-95.6) vs 14.8 (0-20.8) for adequate depth (P< 0.01), and 97.5 (96.6-98.2) vs 68.9(43.4-78.5) for adequate rate (P< .01). Mechanical CPR on a reducible stretcher during vertical transport showed significant improvement in CPR quality in terms of no-flow fraction, compression depth, and rate compared with manual CPR on a standard stretcher. Copyright © 2016 Elsevier Inc. All rights reserved.

ISO 9000 and quality standards improvement in the maintenance ...

African Journals Online (AJOL)

This study investigated ISO 9000 as a tool for improving quality standards in ... The study used cross-sectional descriptive research design, using quantitative research ... enhance business performance and competiveness of manufacturing firms. ... By Country · List All Titles · Free To Read Titles This Journal is Open Access.

Implementation of a Quality Management System in regulatory inspection activities

International Nuclear Information System (INIS)

Pires do Rio, Monica; Ferreira, Paulo Roberto; Cunha, Paulo G. da; Acar, Maria Elizabeth

2005-01-01

The Institute for Radioprotection and Dosimetry - IRD -, of the Brazilian National Nuclear Energy Commission, CNEN, started in 2001, the implementation of a quality management system (SGQ), in the inspection, testing and calibration activities. The SGQ was an institutional guideline and is inserted in a larger system of management of the IRD started in 1999, with the adoption of the National Quality Award criteria - PNQ, within the Project for Excellence in Technological Research of Associacao Brasileira das Instituicoes de Pesquisas Tecnologicas - ABIPTI (Brazilian Association of Technological Research institutions). The proposed quality management system and adopted at the IRD was developed and implemented in accordance with the requirements of NBR ISO/IEC 17025 - General requirements for the competence of testing and calibration laboratories, and ISO/IEC 17020 - General criteria for operation of various types of bodies performing inspections. For regulatory inspection activities, the quality system was implemented on three program inspection services of radiological protection led, respectively, by clinics and hospitals that operate radiotherapy services; industries that use nuclear gauges in their control or productive processes and power reactor operators (CNAAA) - just the environmental part. It was formed a pioneering team of inspectors for standardizing the processes, procedures and starting the implementation of the system in the areas. This work describes the implementation process steps, including difficulties, learning and advantages of the adoption of a quality management system in inspection activities

Quality Service Standard of Food and Beverage Service Staff in Hotel

OpenAIRE

Thanasit Suksutdhi

2014-01-01

This survey research aims to study the standard of service quality of food and beverage service staffs in hotel business by studying the service standard of three sample hotels, Siam Kempinski Hotel Bangkok, Four Seasons Resort Chiang Mai, and Banyan Tree Phuket. In order to find the international service standard of food and beverage service, triangular research, i.e. quantitative, qualitative, and survey were employed. In this research, questionnaires and in-depth interview were used for ge...

Clinical Performance Measures and Quality Improvement System Considerations for Dental Education.

Science.gov (United States)

Parkinson, Joseph W; Zeller, Gregory G

2017-03-01

Quality improvement and quality assurance programs are an integral part of providing excellence in health care delivery. The Dental Quality Alliance and the Commission on Dental Accreditation recognize this and have created standards and recommendations to advise health care providers and health care delivery systems, including dental schools, on measuring the quality of the care delivered to patients. Overall health care expenditures have increased, and the Affordable Care Act has made health care, including dentistry, available to more people in the United States. These increases in cost and in the number of patients accessing care contribute to a heightened interest in measurable quality improvement outcomes that reflect efficiency, effectiveness, and overall value. Practitioners and administrators, both in academia and in the "real world," need an understanding of various quality improvement methodologies available in order to select approaches that support effective monitoring of the quality of care delivered. This article compares and contrasts various quality improvement approaches, programs, and systems currently in use in order to assist dental providers and administrators in choosing quality improvement methodologies pertinent to their practice or institution.

A standards-based approach to quality improvement for HIV services at Zambia Defence Force facilities: results and lessons learned.

Science.gov (United States)

Kols, Adrienne; Kim, Young-Mi; Bazant, Eva; Necochea, Edgar; Banda, Joseph; Stender, Stacie

2015-07-01

The Zambia Defence Force adopted the Standards-Based Management and Recognition approach to improve the quality of the HIV-related services at its health facilities. This quality improvement intervention relies on comprehensive, detailed assessment tools to communicate and verify adherence to national standards of care, and to test and implement changes to improve performance. A quasi-experimental evaluation of the intervention was conducted at eight Zambia Defence Force primary health facilities (four facilities implemented the intervention and four did not). Data from three previous analyses are combined to assess the effect of Standards-Based Management and Recognition on three domains: facility readiness to provide services; observed provider performance during antiretroviral therapy (ART) and antenatal care consultations; and provider perceptions of the work environment. Facility readiness scores for ART improved on four of the eight standards at intervention sites, and one standard at comparison sites. Facility readiness scores for prevention of mother-to-child transmission (PMTCT) of HIV increased by 15 percentage points at intervention sites and 7 percentage points at comparison sites. Provider performance improved significantly at intervention sites for both ART services (from 58 to 84%; P improved at intervention sites and declined at comparison sites; differences in trends between study groups were significant for eight items. A standards-based approach to quality improvement proved effective in supporting healthcare managers and providers to deliver ART and PMTCT services in accordance with evidence-based standards in a health system suffering from staff shortages.

Quantitative methods for assessing the level of competence for quality management systems of education

Directory of Open Access Journals (Sweden)

Kajukova Inna Viktorovna

2015-03-01

Full Text Available The paper studies the process of assessing the quality of education in higher education. The concept of educational quality which is considered from the point of view of all interested parties in the form of indicators sets and which structure included the additional indicators connected with an external assessment from employers, graduates and all society. The Rasch model for educational quality assessment is modernized by introduction of the additional parameters characterizing tests non-standard and their practical importance. That allowed using model for forecasting of probability of manifestation of separate components of competence. The author shows aggregate indicators to measure the level of aggregate formed competencies. The results can be used to assess the quality of the educational process in the transition to the new educational standards. Assessed error of actual measurements. The results can be used in the Quality Management System of Education on going to new educational standards.

IEEE [Institute of Electrical and Electronics Engineers] standards and nuclear software quality engineering

International Nuclear Information System (INIS)

Daughtrey, T.

1988-01-01

Significant new nuclear-specific software standards have recently been adopted under the sponsorship of the American Nuclear Society and the American Society of Mechanical Engineers. The interest of the US Nuclear Regulatory Commission has also been expressed through their issuance of NUREG/CR-4640. These efforts all indicate a growing awareness of the need for thorough, referenceable expressions of the way to build in and evaluate quality in nuclear software. A broader professional perspective can be seen in the growing number of software engineering standards sponsored by the Institute of Electrical and Electronics Engineers (IEEE) Computer Society. This family of standards represents a systematic effort to capture professional consensus on quality practices throughout the software development life cycle. The only omission-the implementation phase-is treated by accepted American National Standards Institute or de facto standards for programming languages

Application of QC_DR software for acceptance testing and routine quality control of direct digital radiography systems: initial experiences using the Italian Association of Physicist in Medicine quality control protocol.

Science.gov (United States)

Nitrosi, Andrea; Bertolini, Marco; Borasi, Giovanni; Botti, Andrea; Barani, Adriana; Rivetti, Stefano; Pierotti, Luisa

2009-12-01

Ideally, medical x-ray imaging systems should be designed to deliver maximum image quality at an acceptable radiation risk to the patient. Quality assurance procedures are employed to ensure that these standards are maintained. A quality control protocol for direct digital radiography (DDR) systems is described and discussed. Software to automatically process and analyze the required images was developed. In this paper, the initial results obtained on equipment of different DDR manufacturers were reported. The protocol was developed to highlight even small discrepancies in standard operating performance.

Quality control procedures of dental diagnostic radiology systems

International Nuclear Information System (INIS)

Andrade, Paula Serra Sasaki

2007-01-01

This work presents quality control reference procedures for dental diagnostic radiology systems, following the recommendations of the Publication 453 of the Brazilian Health Ministry (PF453), to be applied in dental clinics, in order to achieve an improvement in the radiological image qualities and the patient dose reduction. All tests were applied in an intraoral X rays system, following the methodology developed and the requirements of the PF 453. In order to verify the best quality of the image in relation to the smaller exposition time an object test was also developed in this work. The use of this object allowed the reduction of the exposition time of 0.5 seconds, the maximum value of the linear region of the characteristic curve, for 0.2 seconds. The tested X rays system showed a very good agreement with the applied procedures, detaching the reduction of the skin entrance dose using the film-holding devices. However, the size of the field increased and exceeded the maximum value of 6 cm recommended in the standard. The importance of the quality control in dental diagnostic radiology systems is essential due to the constant use of X radiation in dental clinics. The PF453 recommends the frequency of at least two years for the constancy tests. However, it is suggested that the professional, surgeon-dentist, should be responsible for the internal control of the image quality obtained from the X rays device. This can be done through monthly exposures of the object test developed in this work. (author)

Standard guide for establishing a quality assurance program for uranium conversion facilities

CERN Document Server

American Society for Testing and Materials. Philadelphia

2004-01-01

1.1 This guide provides guidance and recommended practices for establishing a comprehensive quality assurance program for uranium conversion facilities. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use. 1.3 The basic elements of a quality assurance program appear in the following order: FUNCTION SECTION Organization 5 Quality Assurance Program 6 Design Control 7 Instructions, Procedures & Drawings 8 Document Control 9 Procurement 10 Identification and Traceability 11 Processes 12 Inspection 13 Control of Measuring and Test Equipment 14 Handling, Storage and Shipping 15 Inspection, Test and Operating Status 16 Control of Nonconforming Items 17 Corrective Actions 18 Quality Assurance Records 19 Audits 20 TABLE 1 NQA-1 Basic Requirements Relat...

Quality assuring measures for pressure vessels - system approaches, certification, accreditation, surveillance

International Nuclear Information System (INIS)

Link, M.

1992-01-01

Quality assurance measures for pressure vessels in accordance with German codes and standards and with the participation of manufacturers, plant operators and third party inspection agencies represent a high standard in terms of engineering, safety and availability. Technical competence and the autonomous action of German industry in the field of quality assurance set internationally recognized safety standards. The continuous exchange of experience through the active involvement of manufacturers, plant operators and third party inspection agencies in work establishing codes and standards and in th updating of the state of the art give the German system a control loop and feedback function (Technical Committees on Pressure Vessels). Within the framework of European harmonization it is a German concern that technical competence and expertise are not lost in a formally legal, bureaucratic certification procedure. In the course of the European harmonization process, the dual German QA concept should maintain its position by utilizing the specialist knowledge and competence of experts, and permit appropriate adaptation. (orig.)

Correlation study among the International Atomic Energy Agency standards and market standards on management system applicable to a UF6 conversion plant operation

International Nuclear Information System (INIS)

Oliveira, Dirceu Paulo de

2008-01-01

The Agency - International Atomic Energy Agency (IAEA), following the market trend of the management system integration, has decided to revise the quality assurance standards - IAEA 50-C/SG-Q publishing, in 2006, the standard on Management System (MS). IAEA GS-R-3 and its IAEA GS-G-3.1 guide. Also, the IAEA is about to publish a supplementary guide - IAEA DS349, which consider the integration of several functions involved in management of nuclear facilities, such as: safety, health, environmental and quality, ensuring that nuclear safety is not compromised. Conversion plants of 'Yellowcake' in UF 6 use and process radioactive materials, as well as other substances normally found in the chemical conventional industry, inserting themselves in the organization profile that require a high pattern of definition, implementation and continuous improvement of their MS and, therefore, should consider an approach of management integrated system (MIS). Taking a UF 6 conversion plant as focus, the correlation was performed among the Agency MS standards and those of the market - ISO 9001, ISO 14001 and OHSAS 18001, as well as with the Agency drafts standards on safety (DS316 and DS344), concluding that, in structuring an MIS, in compliance with the Agency MS standards, except for some adjustments, the ISO 9001, ISO 14001, and OHSAS 18001 are going to be met. On the other hand, the structuring of MIS should identify other requirements on safety, health and environmental, which also consider the conventional chemical and industrial characteristics that are out of the scope (ionizing radiation) of the safety standards of the Agency. The research proposes a documental procedure for a MIS applicable to this plant, providing elements for rationalization and contents of the identified documentation, for the promotion of the integration of the considered MS functions. (author)

[Study on seed quality test and quality standard of Pesudostellaria heterophylla].

Science.gov (United States)

Xiao, Cheng-Hong; Zhou, Tao; Jiang, Wei-Ke; Chen, Min; Xiong, Hou-Xi; Liao, Ming-Wu

2014-08-01

Referring to the rules for agricultural seed testing (GB /T 3543-1995) issued by China, the test of sampling, seed purity, weight per 1 000 seeds, seed moisture, seed viability and germination rate had been studied for screening seed quality test methods of Pesudostellaria heterophylla. The seed quality from different collection areas was measured. The results showed that at least 6.5 g seeds should be sampled and passed through 10-mesh sieve for purity analysis. The weight of 1 000 seeds was determined by using the 500-seed method. The phenotypic observation and size measurement were used for authenticity testing. The seed moisture was determined under the higher temperature (130 ± 2) degrees C for 5 hours. The seeds were dipped into 0.2% TTC sustaining 1 hour at 40 degrees C, then the viability could be determined. The break dormancy seeds were cultured on sand at 10 degrees C. K cluster analysis was applied for the data analysis, the seed quality from different collection areas grading of P. Heterophylla was described as three grades. The seed quality of each grade should reach following requirements: for first grade seeds, germination rate ≥ 86%, 1 000-grain weight ≥ 2.59 g, purity ≥ 87%, moisture ≤ 13.1%; for second grade seeds, germination rate ≥ 70%, 1 000-grain weight ≥ 2.40 g, purity ≥ 77%, moisture ≤ 14.3%; for third grade seeds, germination rate ≥ 41%, 1 000-grain weight ≥ 2.29 g, purity ≥ 76%, moisture ≤ 15.8%. The seed testing methods for quality items of P. heterophylla had been initially established, as well as the primary P. heterophylla seed quality classification standard.

Quality assurance standards of nuclear equipment and international cooperation

International Nuclear Information System (INIS)

Savanger, J.M.

1983-01-01

This paper analyses the quality assurance system; it briefly defines the meaning of this concept and assesses the status of quality assurance in France. The author also reviews the problems and difficulties encountered in the setting up of this system. (NEA) [fr

Quality assurance of computed and digital radiography systems

International Nuclear Information System (INIS)

Walsh, C.; Gorman, D.; Byrne, P.; Larkin, A.; Dowling, A.; Malone, J. F.

2008-01-01

Computed radiography (CR) and digital radiography (DR) are replacing traditional film screen radiography as hospitals move towards digital imaging and picture archiving and communication systems (PACS). Both IPEM and KCARE have recently published quality assurance and acceptance testing guidelines for DR. In this paper, the performance of a range of CR and DR systems is compared. Six different manufacturers are included. Particular attention is paid to the performance of the systems under automatic exposure control (AEC). The patient is simulated using a range of thicknesses of tissue equivalent material. Image quality assessment was based on detector assessment protocols and includes pixel value measures as well as subjective assessment using Leeds Test Objects. The protocols for detector assessment cover a broad range of tests and in general detectors (whether DR or CR) performed satisfactorily. The chief limitation in performing these tests was that not all systems provided ready access to pixel values. Subjective tests include the use of the Leeds TO20. As part of this work, suggested reference values are provided to calculate the TO20 image quality factor. One consequence of moving from film screen to digital technologies is that the dynamic range of digital detectors is much wider, and increased exposures are no longer evident from changes in image quality. As such, AEC is a key parameter for CR and DR. Dose was measured using a standard phantom as a basic means of comparing systems. In order to assess the AEC performance, exit doses were also measured while varying phantom thickness. Signal-to-noise ratios (SNRs) were calculated on a number of systems where pixel values were available. SNR was affected by the selection of acquisition protocol. Comparisons between different technologies and collation of data will help refine acceptance thresholds and contribute to optimising dose and image quality. (authors)

Accounting for both local aquatic community composition and bioavailability in setting site-specific quality standards for zinc.

Science.gov (United States)

Peters, Adam; Simpson, Peter; Moccia, Alessandra

2014-01-01

Recent years have seen considerable improvement in water quality standards (QS) for metals by taking account of the effect of local water chemistry conditions on their bioavailability. We describe preliminary efforts to further refine water quality standards, by taking account of the composition of the local ecological community (the ultimate protection objective) in addition to bioavailability. Relevance of QS to the local ecological community is critical as it is important to minimise instances where quality classification using QS does not reconcile with a quality classification based on an assessment of the composition of the local ecology (e.g. using benthic macroinvertebrate quality assessment metrics such as River InVertebrate Prediction and Classification System (RIVPACS)), particularly where ecology is assessed to be at good or better status, whilst chemical quality is determined to be failing relevant standards. The alternative approach outlined here describes a method to derive a site-specific species sensitivity distribution (SSD) based on the ecological community which is expected to be present at the site in the absence of anthropogenic pressures (reference conditions). The method combines a conventional laboratory ecotoxicity dataset normalised for bioavailability with field measurements of the response of benthic macroinvertebrate abundance to chemical exposure. Site-specific QSref are then derived from the 5%ile of this SSD. Using this method, site QSref have been derived for zinc in an area impacted by historic mining activities. Application of QSref can result in greater agreement between chemical and ecological metrics of environmental quality compared with the use of either conventional (QScon) or bioavailability-based QS (QSbio). In addition to zinc, the approach is likely to be applicable to other metals and possibly other types of chemical stressors (e.g. pesticides). However, the methodology for deriving site-specific targets requires

Evaluation of screen-film system quality: physical principles and measurement techniques

International Nuclear Information System (INIS)

Borasi, G.; Berardi, P.; Ferretti, P.P.; Piccagli, V.

1990-01-01

Comparative evaluation of radiographic filmscreen systems presents several problems from both the theoretical and the experimental point of view. From the theoretical point of view the main difficulties are related to the choice of the parameters best suited to express the 'overall quality' of a system. From the practical point of view the main problem is that to measure some basic quantities (resolution and noise) sophisticated and expensive instruments are required. This paper deals with both these problems. To express image quality we have assumed the signal-to-noise power ration: this index depends in a explicit way on contrast, resolution and noise of the system. The dependence on sensitivity is implicit and was derived using literature data. From a knowledge of the dependence of image quality on sensitivity it is possible to develop an 'overall quality' index which is considered to express the 'technological level' of the systems. In this work some basic phisical quantities (characteristic curve, sensitivity) were evaluated using standard instruments. To measure spatial resolution and noise an inexpensive, PC-based, TV-digitizer system was developed. As an example, both image and overall quality indices were evaluated on three mammographic systems which are typical of the three different 'phases' of the development of this technique

Standardization of quality control plans for highway bridges in Europe: COST Action TU 1406

Science.gov (United States)