WorldWideScience

Sample records for systems sps workers

  1. Ionizing radiation risks to Satellite Power Systems (SPS) workers in space

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    A reference Satellite Power System (SPS) has been designed by NASA and its contractors for the purposes of evaluating the concept and carrying out assessments of the various consequences of development, including those on the health of the space workers. The Department of Energy has responsibility for directing various assessments. Present planning calls for the SPS workers to move from Earth to a low earth orbit (LEO) at an altitude of 500 kilometers; to travel by a transfer ellipse (TE) trajectory to a geosynchronous orbit (GEO) at an altitude of 36,000 kilometers; and to remain in GEO orbit for about 90 percent of the total time aloft. The radiation risks to the health of workers who will construct and maintain solar power satellites in the space environment are studied. The charge to the committee was: (a) to evaluate the radiation environment estimated for the Reference System which could represent a hazard; (b) to assess the possible somatic and genetic radiation hazards; and (c) to estimate the risks to the health of SPS workers due to space radiation exposure, and to make recommendations based on these conclusions. Details are presented. (WHK)

  2. Ionizing radiation risks to satellite power systems (SPS) workers

    International Nuclear Information System (INIS)

    1980-11-01

    The radiation risks to the health of workers who will construct and maintain solar power satellites in the space environment were examined. For ionizing radiation, the major concern will be late or delayed health effects, particularly the increased risk of radiation-induced cancer. The estimated lifetime risk for cancer is 0.8 to 5.0 excess deaths per 10,000 workers per rad of exposure. Thus, for example, in 10,000 workers who completed ten missions with an exposure of 40 rem per mission, 320 to 2000 additional deaths in excess of the 1640 deaths from normally occurring cancer, would be expected. These estimates would indicate a 20 to 120% increase in cancer deaths in the worker-population. The wide range in these estimates stems from the choice of the risk-projection model and the dose-response relationsip. The choice between a linear and a linear-quadratic dose-response model may alter the risk estimate by a factor of about two. The method of analysis (e.g., relative vs absolute risk model) can alter the risk estimate by an additional factor of three. Choosing different age and sex distributions can further change the estimate by another factor of up to three. The potential genetic consequences could be of significance, but at the present time, sufficient information on the age and sex distribution of the worker population is lacking for precise estimation of risk. The potential teratogenic consequences resulting from radiation are considered significant. Radiation exposure of a pregnant worker could result in developmental abnormalities

  3. Ionizing radiation risks to satellite power systems (SPS) workers

    Energy Technology Data Exchange (ETDEWEB)

    Lyman, J.T.; Ainsworth, E.J.; Alpen, E.L.; Bond, V.; Curtis, S.B.; Fry, R.J.M.; Jackson, K.L.; Nachtwey, S.; Sondhaus, C.; Tobias, C.A.; Fabrikant, J.I.

    1980-11-01

    The radiation risks to the health of workers who will construct and maintain solar power satellites in the space environment were examined. For ionizing radiation, the major concern will be late or delayed health effects, particularly the increased risk of radiation-induced cancer. The estimated lifetime risk for cancer is 0.8 to 5.0 excess deaths per 10,000 workers per rad of exposure. Thus, for example, in 10,000 workers who completed ten missions with an exposure of 40 rem per mission, 320 to 2000 additional deaths in excess of the 1640 deaths from normally occurring cancer, would be expected. These estimates would indicate a 20 to 120% increase in cancer deaths in the worker-population. The wide range in these estimates stems from the choice of the risk-projection model and the dose-response relationsip. The choice between a linear and a linear-quadratic dose-response model may alter the risk estimate by a factor of about two. The method of analysis (e.g., relative vs absolute risk model) can alter the risk estimate by an additional factor of three. Choosing different age and sex distributions can further change the estimate by another factor of up to three. The potential genetic consequences could be of significance, but at the present time, sufficient information on the age and sex distribution of the worker population is lacking for precise estimation of risk. The potential teratogenic consequences resulting from radiation are considered significant. Radiation exposure of a pregnant worker could result in developmental abnormalities.

  4. SPS extraction systems

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    One of the 3-m long electrostatics septa. The septum itself consists of 0.15 mm thick molybdenum wires with a 1.5 mm pitch. Each of the two SPS extraction systems will contain four of these electrostatic septa.

  5. Extraction systems of the SPS

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    A pair of prototype septum magnets for the extraction systems of the SPS. Each of the two extraction systems will contain eighteen of these septum magnets (eight with a 4 mm septum and ten with a 16 mm septum) mounted in pairs in nine vacuum tanks.

  6. The convergent LEP and SPS control systems

    International Nuclear Information System (INIS)

    Altaber, J.

    1987-01-01

    The major design contraint of the control system for LEP is the compatibility with the existing SPS control system. The first reason for this compatibility is to allow a long term convergence of the SPS control system towards the LEP one. The second reason is to operate both LEP and SPS machines from a unique main control room. The distributed architecture of LEP and the existing SPS control systems are described. The design of the equipment interface for both machines is explained. Finally, the infrastructure of the common main control room for LEP and SPS is described

  7. Integration of SPS with utility system networks

    Energy Technology Data Exchange (ETDEWEB)

    Kaupang, B.M.

    1980-06-01

    This paper will discuss the integration of SPS power in electric utility power systems. Specifically treated will be the nature of the power output variations from the spacecraft to the rectenna, the operational characteristics of the rectenna power and the impacts on the electric utility system from utilizing SPS power to serve part of the system load.

  8. Integration of SPS with utility system networks

    Science.gov (United States)

    Kaupang, B. M.

    1980-01-01

    The integration of Satellite Power System (SPS) power in electric utility power systems is discussed. Specifically, the nature of the power output variations from the spacecraft to the rectenna, the operational characteristics of the rectenna power, and the impacts on the electric utility system from utilizing SPS power to serve part of the system load are treated. It is concluded that if RF beam control is an acceptable method for power control, and that the site distribution of SPS rectennas do not cause a very high local penetration (40 to 50%), SPS may be integrated into electric utility system with a few negative impacts. Increased regulating duty on the conventional generation, and a potential impact on system reliability for SPS penetration in excess of about 25% appear to be two areas of concern.

  9. Satellite Power Systems (SPS) concept definition study. Volume 6: SPS technology requirements and verification

    Science.gov (United States)

    Hanley, G.

    1978-01-01

    Volume 6 of the SPS Concept Definition Study is presented and also incorporates results of NASA/MSFC in-house effort. This volume includes a supporting research and technology summary. Other volumes of the final report that provide additional detail are as follows: (1) Executive Summary; (2) SPS System Requirements; (3) SPS Concept Evolution; (4) SPS Point Design Definition; (5) Transportation and Operations Analysis; and Volume 7, SPS Program Plan and Economic Analysis.

  10. Satellite power system (SPS) public outreach experiment

    Energy Technology Data Exchange (ETDEWEB)

    McNeal, S.R.

    1980-12-01

    To improve the results of the Satellite Power System (SPS) Concept Development and Evaluation Program, an outreach experiment was conducted. Three public interest groups participated: the L-5 Society (L-5), Citizen's Energy Project (CEP), and the Forum for the Advancement of Students in Science and Technology (FASST). Each group disseminated summary information about SPS to approximately 3000 constituents with a request for feedback on the SPS concept. The objectives of the outreach were to (1) determine the areas of major concern relative to the SPS concept, and (2) gain experience with an outreach process for use in future public involvement. Due to the combined efforts of all three groups, 9200 individuals/organizations received information about the SPS concept. Over 1500 receipients of this information provided feedback. The response to the outreach effort was positive for all three groups, suggesting that the effort extended by the SPS Project Division to encourage an information exchange with the public was well received. The general response to the SPS differed with each group. The L-5 position is very much in favor of SPS; CEP is very much opposed and FASST is relatively neutral. The responses are analyzed, and from the responses some questions and answers about the satellite power system are presented in the appendix. (WHK)

  11. SPS RF System Amplifier plant

    CERN Multimedia

    1977-01-01

    The picture shows a 2 MW, 200 MHz amplifier plant with feeder lines. The main RF-system of the SPS comprises four cavities: two of 20 m length and two of 16.5 m length. They are all installed in one long straight section (LSS 3). These cavities are of the travelling-wave type operating at a centre frequency of 200.2 MHz. They are wideband, filling time about 700 ns and untuned. The power amplifiers, using tetrodes are installed in a surface building 200 m from the cavities. Initially only two cavities were installed, a third cavity was installed in 1978 and a forth one in 1979. The number of power amplifiers was also increased: to the first 2 MW plant a second 2 MW plant was added and by end 1979 there were 8 500 kW units combined in pairs to feed each of the 4 cavities with up to about 1 MW RF power, resulting in a total accelerating voltage of about 8 MV. See also 7412016X, 7412017X, 7411048X.

  12. Satellite Power System (SPS) Program Summary

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    The joint DOE/NASA SPS program has as its objective to achieve by the end of 1980 an initial understanding of the technical feasibility, economic practicability, and the social and environmental acceptability of the SPS concepts so that recommendations concerning program continuation can be made. The four major study areas include (1) systems definition; (2) environmental assessment; (3) societal assessment; and (4) comparative assessment of alternative energy systems. All the projects on the SPS program are listed and summarized for FY 1978. (WHK)

  13. The SPS Individual Bunch Measurement System

    CERN Document Server

    Guerrero, A; Jones, R; Savioz, J J

    2001-01-01

    The Individual Bunch Measurement System (IBMS) allows the intensity of each bunch in an LHC batch to be the measured both in the PS to SPS transfer lines and in the SPS ring itself. The method is vased on measuring the peak and valley of the analogue signal supplied by a Fast Beam Current Transformer at a frequency of 40 MHz. A 12 bit acquisition system is required to obtain a 1% resolution for the intensity range of 5X10`9 to 1.7X10`11 protons per bunch, corresponding to the pilot and ultimate LHC bunch intensities. The acquisition selection and external trigger adjustment system is driven by the 200MHz RF, which is distributed using a single-mode fibre-optic link. A local oscilloscope, controlled via a GPIB interface, allows the remote adjustment of the timing signals. The low-level software consists of a real-time task and a communication server run on a VME Power PC, which is accessed using a graphical user interface. This paper describes the system as a whole and presents some recent uses and results fro...

  14. Satellite Power System (SPS) financial/management scenarios

    Science.gov (United States)

    Vajk, J. P.

    1978-01-01

    The possible benefits of a Satellite Power System (SPS) program, both domestically and internationally, justify detailed and imaginative investigation of the issues involved in financing and managing such a large-scale program. In this study, ten possible methods of financing a SPS program are identified ranging from pure government agency to private corporations. The following were analyzed and evaluated: (1) capital requirements for SPS; (2) ownership and control; (3) management principles; (4) organizational forms for SPS; (5) criteria for evaluation; (6) detailed description and preliminary evaluation of alternatives; (7) phased approaches; and (8) comparative evaluation. Key issues and observations and recommendations for further study are also presented.

  15. Satellite Power System (SPS) societal assessment

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    Construction and operation of a 60-unit (300 GW) domestic SPS over the period 2000 to 2030 would stress many segments of US society. A significant commitment of resources (land, energy, materials) would be required, and a substantial proportion of them would have to be committed prior to the production of any SPS electricity. Estimated resource demands, however, seem to be within US capabilities. Modifications will be required of institutions called upon to deal with SPS. These include financial, managerial and regulatory entities and, most particularly, the utility industry. Again, the required changes, while certainly profound, seem to be well within the realm of possibility. Enhanced cooperation in international affairs will be necessary to accommodate development and operation of the SPS. To remove its potential as a military threat and to reduce its vulnerability, either the SPS itself must become an international enterprise, or it must be subject to unrestricted international inspection. How either of these objectives could, in fact, be achieved, or which is preferable, remains unclear. Forty-four concerns about the SPS were identified via a public outreach experiment involving 9000 individuals from three special interest organizations. The concerns focused on environmental impacts (particularly the effects of microwave radiation) and the centralizing tendency of the SPS on society. The interim results of the public outreach experiment influenced the scope and direction of the CDEP; the final results will be instrumental in defining further societal assessment efforts.

  16. The CERN LEP-SPS Librarian system

    International Nuclear Information System (INIS)

    Corniaux, C.; Morpurgo, G.

    1990-01-01

    The complexity of a software working environment, such as the control system for the SPS and LEP accelerators, requires a considerable management effort. The software needed to run the machines is continuously evolving, as new releases of application and system programs are introduced rather frequency. Ideally the management effort must coordinate all the different software developers and their users (the machine operating team). A software tool, the Librarian, has been written to help them in performing this task. Its ultimate goal is to enable the accelerator operators to retain control of all the software running in the control system. All the source files needed to produce a piece of running software (a 'product') are saved together, and can be retrieved either individually or as a whole. Management of the different versions of a product is also implemented, as well as a scheme for protections and access rights depending on the type of user (Librarian manager, application manager or software developer). The data base ORACLE has been used to maintain logical links between files saved under the Librarian. (orig.)

  17. A users view of the SPS and LEP control systems

    International Nuclear Information System (INIS)

    Bailey, R.

    1992-01-01

    Every accelerator has a control system; at present the SPS has two, both of which are needed to run the machine. Consequently a user of the SPS/LEP complex has to be concurrently familiar with three control systems. While this situation brings problems it allows, even forces, comparison between the different systems, which in turn enriches the user viewpoint. This paper assesses the SPS and LEP control systems from the point of view of the user, who may be an equipment specialist, operator, accelerator physicist or combinations thereof. (author)

  18. Wire compensation: Performance, SPS MDs, pulsed system

    CERN Document Server

    Dorda, U

    2008-01-01

    A wire compensation (BBLR) scheme has been proposed in order to improve the long range beam-beam performance of the nominal LHC and its phase 1 and phase 2 upgrades[1]. In this paper we present experimental experience of the CERN SPS wires (BBLR) and report on progress with the RF BBLR.

  19. The new control system of the SPS target sector

    CERN Document Server

    Carlier, E; Mecredy, N; O'Leary, J

    1999-01-01

    The SPS, the Super Proton Synchrotron at CERN, is an accelerator originally designed and commissioned in 1976 for protons. The control system of the SPS target stations, beam absorbers and other aperture limiting devices was developed in the seventies. It was mainly based on home made electronics and equipment dependent software. With time, this electronics has become obsolete, difficult to maintain in operation and not suitable for integration into a modern control system. In 1997, a project was set up to modernise the electronics and the related software. The new control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment controllers and connected through PROFIBUS to a Windows-NT front-end PC running the SIEMENS WinCC SCADA package which acts as local controller and remote access gateway. This fully industrial solution has been successfully integrated into the actual SPS accelerator control infrast...

  20. Using Systemic Problem Solving (SPS) to Assess Student ...

    African Journals Online (AJOL)

    This paper focuses on the uses of systemic problem solving in chemistry at the tertiary level. Traditional problem solving (TPS) is a useful tool to help teachers examine recall of information, comprehension, and application. However, systemic problem solving (SPS) can challenge students and probe higher cognitive skills ...

  1. Preliminary environmental assessment for the satellite power system (SPS)

    Energy Technology Data Exchange (ETDEWEB)

    1978-10-01

    A preliminary assessment of the impact of the Satellite Power System (SPS) on the environment is presented. Information that has appeared in documents referenced herein is integrated and assimilated. The state-of-knowledge as perceived from recently completed DOE-sponsored studies is disclosed, and prospective research and study programs that can advance the state-of-knowledge and provide an expanded data base for use in an assessment planned for 1980 are defined. Alternatives for research that may be implemented in order to achieve this advancement are also discussed in order that a plan can be selected which will be consistent with the fiscal and time constraints on the SPS Environmental Assessment Program. Health and ecological effects of microwave radiation, nonmicrowave effects on health and the environment (terrestrial operations and space operations), effects on the atmosphere, and effects on communications systems are examined in detail. (WHK)

  2. Operation of the transverse feedback system at the CERN SPS

    International Nuclear Information System (INIS)

    Bossart, R.; Louwerse, R.; Mourier, J.; Vos, L.

    1987-01-01

    To prevent transverse instabilities at high beam intensity in the SPS, the transverse feedback system for damping the betatron oscillations has been upgraded for larger damping decrements and for increased system's bandwidth. The feedback loop now contains a digital delay line cancellor, so that the damper works with a velocity feedback Δx/Δt, unaffected by the closed orbit position x at the pick-up station. The digital processing of the feedback signal facilitates nonlinear feedback techniques such as antidamping and ''band-bang'' feedback. The ''bang-bang'' feedback provides the maximum possible damping rate of the injection oscillations in the SPS-collider, in order to minimize the emittance increase caused by filamentation. The antidamping nonlinearity provides small continuous beam oscillations of 50 μm amplitude for tracking the machine tune Q with a phase locked loop

  3. The new control system of the SPS injection kicker

    CERN Document Server

    Antoine, A; Marchand, A; Verhagen, H

    2002-01-01

    The SPS accelerator will be used as injector for the LHC and has to be adapted to the LHC requirements. The tight specification on beam blow-up and bunch spacing in the SPS has required an upgrade program of the SPS injection kicker in order to obtain a reduction of the magnetic field ripple to less than ± 0.5% and of the magnet current rise time to less than 145 ns. In this context, the slow control part has been entirely rebuilt on the basis of off-the-shelf industrial components. A hierarchical architecture based on a SIEMENS S7-400 master programmable logic controller interconnected through PROFIBUS-DP to S7-300 deported and decentralised I/Os has been implemented. Integration of in-house specific G-64 hardware systems inside this industrial environment has been done through a PROFIBUS-DP to G-64 intelligent interface based on an OEM fieldbus mezzanine board on one side and an FPGA implementing the required functionality on the other. Simultaneously, the fast timing system has been completely reshuffled ...

  4. The NODAL system for the SPS

    International Nuclear Information System (INIS)

    Crowley-Milling, M.C.; Shering, G.C.

    1978-01-01

    A comprehensive description is given of the NODAL system used for computer control of the CERN Super-Proton Synchrotron. Details are given of NODAL, a high-level programming language based on FOCAL and SNOBOL4, designed for interactive use. It is shown how this interpretive language is used with a network of computers and how it can be extended by adding machine-code modules. The report updates and replaces an earlier one published in 1974. (Auth.)

  5. The SPS acceleration system: travelling wave drift-tube structure for the CERN SPS

    International Nuclear Information System (INIS)

    Dome, G.

    1976-01-01

    The SPS accelerating structure is essentially a high energy proton linac, except for a small frequency swing during the acceleration cycle. It is operated almost CW with a travelling wave giving an energy gain around 0.1 MeV/m. The guide-lines for the design of such a structure are explained, and practical solutions are described. (author)

  6. Experience with the control system for the SPS

    International Nuclear Information System (INIS)

    Crowley-Milling, M.C.

    1978-01-01

    The design of the multicomputer control system for the 400 GeV Super Proton Synchrotron (SPS) at CERN was described in the report CERN 75-20, issued in 1975, before the commissioning of the accelerator. The present report, which should be read in conjunction with the earlier one, describes the modification made to the system in the light of experience, and how it has adapted to changing requirements. Reliability of the system and how it has adapted to changing requirements. Reliability of the system and of its components is discussed. Taking into account modern developments of microprocessors, etc., the changes that might be made if the system were to be redesigned are examined. Finally, the application of the design philosophy to other fields is discussed briefly. (Auth.)

  7. The New RF Control System for the CERN SPS Accelerator

    CERN Document Server

    Baudrenghien, P; Linnecar, Trevor Paul R; Marty, H; Molendijk, J C; Pilchen, Y; Wehrle, U; Weierud, F

    1996-01-01

    The old SPS RF control system designed in 1972 has been replaced completely, i.e. both hardware and software. The new system has to control both RF equipment conceived during the last 23 years and future (modern) equipment. Using information analysis methods, we derived a model of an RF command and designed a data base accordingly (ORACLE®). Information from this data base is used for command generation and processing and also for archiving settings. The advantage is purely generic software, i.e. the same computer code is used for switching on an RF amplifier, as for setting a frequency synthesizer. New equipment is added very simply by entering new records in the data base. Additional features include a reservation scheme whereby a user can take private control of any piece of equipment, a reporting facility notifying the user of the simultaneous control activity by other users on RF equipment, and a capability scheme assigning a level of expertise to each user restricting action on the equipment.

  8. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 1: System engineering

    Science.gov (United States)

    Hanley, G. M.

    1979-01-01

    Volume 2, Part 1, of a seven volume report is presented. Part 1 encompasses Satellite Power Systems (SPS) systems engineering aspects and is divided into three sections. The first section presents descriptions of the various candidate concepts considered and conclusions and recommendations for a preferred concept. The second section presents a summary of results of the various trade studies and analysis conducted during the course of the study. The third section describes the Photovoltaic Satellite Based Satellite Power System (SPS) Point Design as it was defined through studies performed during the period January 1977 through March 1979.

  9. Satellite Power Systems (SPS) concept definition study. Volume 2, part 2: System engineering. [cost and programmatics

    Science.gov (United States)

    Hanley, G. M.

    1980-01-01

    The latest technical and programmatic developments are considered as well as expansions of the Rockwell SPS cost model covering each phase of the program through the year 2030. Comparative cost/economic analyses cover elements of the satellite, construction system, space transportation vehicles and operations, and the ground receiving station. System plans to define time phased costs and planning requirements that support major milestones through the year 2000. A special analysis is included on natural resources required to build the SPS reference configuration. An appendix contains the SPS Work Breakdown Structure and dictionary along with detail cost data sheet on each system and main element of the program. Over 200 line items address DDT&E, theoretical first unit, investment cost per satellite, and operations charges for replacement capital and normal operations and maintenance costs.

  10. The New Control and Interlock System for the SPS Main Power Converters

    CERN Document Server

    Denis, B; Mugnier, C; Varas, J

    1999-01-01

    The Control and Interlock System (CIS) of the SPS main power converters was designed in the mid-70s and became increasingly difficult to maintain. A new system based on Programmable Logic Controllers has been developed by an external contractor in close collaboration with CERN. The system is now operational and fully integrated in the SPS/LEP control infrastructure. The CIS is the first major contracted industrial solution used to control accelerator equipment directly involved in the production of particle beams at CERN. This paper gives an overview of the SPS main power converter installation and describes both the contractual and technical solution adopted for the CIS. It first explains how the system was specified and how the contractual relationship was defined to respect CERN’s purchasing rules and the operational requirements of the SPS accelerator. The architectural design of the new system is presented with special emphasis on how the conflict between safety and availability has been addressed.

  11. Evaluation of strip-line pick-up system for the SPS wideband transverse feedback system

    CERN Document Server

    Kotzian, G; Steinhagen, R J; Valuch, D; Wehrle, U

    2017-01-01

    The proposed SPS Wideband Transverse Feedback sys- tem requires a wide-band pick-up system to be able to de- tect intra-bunch motion within the SPS proton bunches, captured and accelerated in a 200 MHz bucket. We present the electro-magnetic design of transverse beam position pick-up options optimised for installation in the SPS and evaluate their performance reach with respect to direct time domain sampling of the intra-bunch motion. The analy- sis also discusses the achieved subsystem responses of the associated cabling with new low dispersion smooth wall coaxial cables, wide-band generation of intensity and posi- tion signals by means of 180 degree RF hybrids as well as passive techniques to electronically suppress the beam off- set signal, needed to optimise the dynamic range and posi- tion resolution of the planned digital intra-bunch feedback system.

  12. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics

    Science.gov (United States)

    Hanley, G. M.

    1979-01-01

    Volume 2, Part 2, of a seven volume Satellite Power Systems (SPS) report is presented. Part 2 covers cost and programmatics and is divided into four sections. The first section gives illustrations of the SPS reference satellite and rectenna concept, and an overall scenario for SPS space transportation involvement. The second section presents SPS program plans for the implementation of PHASE C/D activities. These plans describe SPS program schedules and networks, critical items of systems evolution/technology development, and the natural resources analysis. The fourth section presents summary comments on the methods and rationale followed in arriving at the results documented. Suggestions are also provided in those areas where further analysis or evaluation will enhance SPS cost and programmatic definitions.

  13. Preliminary assessment of the environmental impacts of the Satellite Power System (SPS)

    International Nuclear Information System (INIS)

    Halverson, S.L.; Rote, D.M.; Rush, C.M.; Davis, K.; White, M.; Cahill, D.F.

    1978-01-01

    The impact of the Satellite Power System (SPS) Microwave Power Transmission System (MPTS) as well as impacts related to other elements of the total SPS on the environment are being determined. The goal of these programs is to advance the state of knowledge by the year 1980 to the point where an assessment can be made of the probability and severity of the impacts of the SPS. Assessments will be made of the effects on the health and safety of the public, and occupationally involved personnel, and the ecology; the upper and lower atmosphere including climatological impacts; and on communications systems including electromagnetic compatibility, the effects of microwave heating of the ionosphere and magnetosphere, and the effects of F-layer depletion by launch vehicle and transport vehicle effluents. If the assessment indicates that the impacts are acceptable or that feasible mitigating strategies can be implemented and if other related assessments (the impact on society and a competitive comparison of the SPS with other energy alternatives) are favorable, a decision may be made to implement the development of the SPS related technologies. This paper identifies postulated effects and summarizes the research efforts to determine whether or not these effects will occur

  14. SPS 2000

    International Nuclear Information System (INIS)

    Collins, P.Q.; Tomkins, R.; Nagatomo, M.

    1991-01-01

    This paper reports that electric utilities have not yet begun to pay satellite solar power stations (SPS) serious attention as a possibly major new energy source. This is largely due to the fact that there is still very little firm information of the kind that utilities need in order to assess the SPS as a possible candidate for the investment. The SPS 2000 project is designed to provide such information at the lowest possible cost and at the earliest date. It comprises a space segment in low Earth equatorial orbit transmitting photovoltaic-generated microwave power to one or more rectifying antennas (rectennas) on the equator. These will receive 1 - 10MW of power during each satellite pass, enabling utilities to perform several experiments each day on many different technical and economic aspects of the system's operation. The results will help utilities to calculate the prices that they could profitably offer to satellite operators for commercial supplies of microwave power delivered from space to given specifications

  15. Preliminary environmental assessment for the Satellite Power System (SPS). Revision 1. Volume 2. Detailed assessment

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The Department of Energy (DOE) is considering several options for generating electrical power to meet future energy needs. The satellite power system (SPS), one of these options, would collect solar energy through a system of satellites in space and transfer this energy to earth. A reference system has been described that would convert the energy to microwaves and transmit the microwave energy via directive antennas to large receiving/rectifying antennas (rectennas) located on the earth. At the rectennas, the microwave energy would be converted into electricity. The potential environmental impacts of constructing and operating the satellite power system are being assessed as a part of the Department of Energy's SPS Concept Development and Evaluation Program. This report is Revision I of the Preliminary Environmental Assessment for the Satellite Power System published in October 1978. It refines and extends the 1978 assessment and provides a basis for a 1980 revision that will guide and support DOE recommendations regarding future SPS development. This is Volume 2 of two volumes. It contains the technical detail suitable for peer review and integrates information appearing in documents referenced herein. The key environmental issues associated with the SPS concern human health and safety, ecosystems, climate, and electromagnetic systems interactions. In order to address these issues in an organized manner, five tasks are reported: (I) microwave-radiation health and ecological effects; (II) nonmicrowave health and ecological effectss; (III) atmospheric effects; (IV) effects on communication systems due to ionospheric disturbance; and (V) electromagnetic compatibility. (WHK)

  16. Performance Evaluation of the SPS Scraping System in View of the High Luminosity LHC

    CERN Document Server

    AUTHOR|(SzGeCERN)659273; Cerutti, Francesco

    Injection in the LHC is a delicate moment, since the LHC collimation system cannot offer adequate protection during beam transfer. For this reason, a complex chain of injection protection devices has been put in place. Among them, the SPS scrapers are the multi-turn cleaning system installed in the SPS aimed at halo removal immediately before injection in the LHC. The upgrade in luminosity of the LHC foresees beams brighter than those currently available in machine, posing serious problems to the performance of the existing injection protection systems. In particular, the integrity of beam-intercepting devices is challenged by unprecedented beam parameters, leading to interactions potentially destructive. In this context, a new design of scrapers has been proposed, aimed at improved robustness and performance. This thesis compares the two scraping systems, i.e. the existing one and the one proposed for upgrade. Unlike any other collimation system for regular halo cleaning, both are "fast" systems, characteris...

  17. The design of the control system for the SPS

    International Nuclear Information System (INIS)

    Crowley-Milling, M.C.

    1975-01-01

    After some general remarks about the requirements for the control system of large accelerators, a brief description is given of the CERN Super Proton Synchrotron. The major part of the report surveys the evolution of the hardware and software, with particular emphasis on the reasons for the choice made. The message-transfer system, the timing system, the operator interface, the command language and data modules are treated in detail, followed by some considerations on the protection and reliability. Finally, a preliminary assessment is made of the operation of the system for testing and commissioning parts of the accelerator equipment. (Author)

  18. Advanced worker protection system

    International Nuclear Information System (INIS)

    Caldwell, B.; Duncan, P.; Myers, J.

    1995-01-01

    The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D ampersand D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D ampersand D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D ampersand D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system maintenance, and dramatically improve worker productivity through longer duration work cycles. Phase I of the project has resulted in a full scale prototype Advanced Worker Protection Ensemble (AWPE, everything the worker will wear), with sub-scale support equipment, suitable for integrated testing and preliminary evaluation. Phase II will culminate in a full scale, certified, pre-production AWPS and a site demonstration

  19. Advanced worker protection system

    Energy Technology Data Exchange (ETDEWEB)

    Caldwell, B.; Duncan, P.; Myers, J.

    1995-12-01

    The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system maintenance, and dramatically improve worker productivity through longer duration work cycles. Phase I of the project has resulted in a full scale prototype Advanced Worker Protection Ensemble (AWPE, everything the worker will wear), with sub-scale support equipment, suitable for integrated testing and preliminary evaluation. Phase II will culminate in a full scale, certified, pre-production AWPS and a site demonstration.

  20. SIMULATION OF E-CLOUD DRIVEN INSTABILITY AND ITS ATTENUATION USING A FEEDBACK SYSTEM IN THE CERN SPS

    International Nuclear Information System (INIS)

    Vay, J.-L.; Byrd, J.M.; Furman, M.A.; Secondo, R.; Venturini, M.; Fox, J.D.; Rivetta, C.H.; Hofle, W.

    2010-01-01

    Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS (1), and a feedback system to control the instabilities is under active development (2). We present the latest improvements to the Warp-Posinst simulation framework and feedback model, and its application to the self-consistent simulations of two consecutive bunches interacting with an electron cloud in the SPS.

  1. Simulation of E-Cloud Driven Instability And Its Attenuation Using a Feedback System in the CERN SPS

    International Nuclear Information System (INIS)

    Vay, Jean-Luc

    2012-01-01

    Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS, and a feedback system to control the instabilities is under active development. We present the latest improvements to the Warp-Posinst simulation framework and feedback model, and its application to the self-consistent simulations of two consecutive bunches interacting with an electron cloud in the SPS.

  2. Advanced worker protection system

    Energy Technology Data Exchange (ETDEWEB)

    Caldwell, B.; Duncan, P.; Myers, J. [Oceaneering Space Systems, Houston, TX (United States)

    1995-10-01

    The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project describes the development of an Advanced Worker Protection System (AWPS) which will include a life-support backpack with liquid air for cooling and as a supply of breathing gas, protective clothing, respirators, communications, and support equipment.

  3. Advanced worker protection system

    International Nuclear Information System (INIS)

    Caldwell, B.; Duncan, P.; Myers, J.

    1995-01-01

    The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D ampersand D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D ampersand D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D ampersand D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project describes the development of an Advanced Worker Protection System (AWPS) which will include a life-support backpack with liquid air for cooling and as a supply of breathing gas, protective clothing, respirators, communications, and support equipment

  4. Solar charge regulator and operation management for PV island systems with modern memory-programmable control (SPS); Solarladeregler und Betriebsmanagement fuer PV-Inselsysteme mit moderner Speicherprogrammierbarer Steuerung (SPS)

    Energy Technology Data Exchange (ETDEWEB)

    Dohlen, K. v.; Nussberger, B. [ENNOS Gesellschaft fuer Innovative Energiesysteme mbH, Freiburg (Germany)

    1998-12-01

    Modern memory programmable controls (SPS) are good value for money, powerful and have such a low power consumption that they are suitable for control and regulation purposes in PV island systems. The development of the solar charge regulators and operation management on the basis of an SPS shown in the article was carried out with the super-imposed target of increasing the use of proven standard industrial products in their construction and simplifying their operation and raising their reliability. [Deutsch] Moderne Speicherprogrammierbare Steuerungen (SPS) sind preiswert, leistungsfaehig und besitzen inzwischen eine so niedrige Leistungsaufnahme, dass sie zu Steuer- und Regelzwecken in PV-Inselsystemen geeignet sind. Die Entwicklung des im Beitrag vorgestellten Solarladereglers und Betriebsmanagement auf der Basis einer SPS stand unter der uebergeordneten Zielsetzung, PV-Anlagen durch den Einsatz von bewaehrten Standard-Industrieprodukten in ihrem Aufbau und der Bedienung zu vereinfachen und in ihrer Zuverlaessigkeit zu steigern. (orig.)

  5. The RTC - a software support system for the control of the CERN SPS

    International Nuclear Information System (INIS)

    Herr, W.; Lauckner, R.; Morpurga, G.

    1989-01-01

    The RTC (Run Time Coordinator) is a software support system designed for the SPS control system to provide a runtime environment for application software. It coordinates the execution of individual programs or processes and supervises the process control, i.e. process synchronization, inter process communication, data transfer and operator I/O. This supervision includes the control of processes distributed on a UNIX based network. A standard language independent data interface is part of the system. The system includes tools for data presentation, error logging and contention resolution. This strategy of separating system dependent features from the body of the application programs leads to high flexibility and simplifies the software development. The basic philosophy of the RTC is discussed and its implementation is described. 7 refs

  6. Installation and management of the SPS and LEP control system computers

    International Nuclear Information System (INIS)

    Bland, Alastair

    1994-01-01

    Control of the CERN SPS and LEP accelerators and service equipment on the two CERN main sites is performed via workstations, file servers, Process Control Assemblies (PCAs) and Device Stub Controllers (DSCs). This paper describes the methods and tools that have been developed to manage the file servers, PCAs and DSCs since the LEP startup in 1989. There are five operational DECstation 5000s used as file servers and boot servers for the PCAs and DSCs. The PCAs consist of 90 SCO Xenix 386 PCs, 40 LynxOS 486 PCs and more than 40 older NORD 100s. The DSCs consist of 90 OS-968030 VME crates and 10 LynxOS 68030 VME crates. In addition there are over 100 development systems. The controls group is responsible for installing the computers, starting all the user processes and ensuring that the computers and the processes run correctly. The operators in the SPS/LEP control room and the Services control room have a Motif-based X window program which gives them, in real time, the state of all the computers and allows them to solve problems or reboot them. ((orig.))

  7. Advanced Worker Protection System

    International Nuclear Information System (INIS)

    1996-04-01

    The Advanced Worker Protection System (AWPS) is a liquid-air-based, self-contained breathing and cooling system with a duration of 2 hrs. AWPS employs a patented system developed by Oceaneering Space Systems (OSS), and was demonstrated at their facility in Houston, TX as well as at Kansas State University, Manhattan. The heart of the system is the life-support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack is combined with advanced protective garments, an advanced liquid cooling garment (LCG), a respirator, and communications and support equipment. The prototype unit development and testing under Phase 1 has demonstrated that AWPS has the ability to meet performance criteria. These criteria were developed with an understanding of both the AWPS capabilities and the DOE decontamination and decommissioning (D and D) activities protection needs

  8. Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics, appendixes

    Science.gov (United States)

    Hanley, G. M.

    1979-01-01

    Appendixes for Volume 2 (Part 2) of a seven volume Satellite (SPS) report are presented. The document contains two appendixes. The first is a SPS work breakdown structure dictionary. The second gives SPS cost estimating relationships and contains the cost analyses and a description of cost elements that comprise the SPS program.

  9. The Run Control system of the NA62 experiment at CERN SPS

    CERN Document Server

    Lazzeroni, Cristina

    2016-01-01

    The NA62 experiment at CERN SPS started physics data taking this year with the aim to measure the ultra-rare decay K + → π +νν¯. The experiment consists of a large number of subsystems to reach the goal of 10 % accuracy and less than 10 % background. The Run Control has been designed to link their trigger and data acquisition system in a single central application easily controllable by non-expert shifters. It has been continuously evolving over time, integrating new equipments, following new requirements and feedback from shifters. The next steps of development is a more automatized system that integrates the knowledge acquired during the operation of the experiment.

  10. Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)

    Energy Technology Data Exchange (ETDEWEB)

    Omori, M. [Tohoku Univ., Sendai (Japan). Inst. for Materials Research

    2000-08-15

    The graphite die set in spark plasma system (SPS) is heated by a pulse direct current. Weak plasma, discharge impact, electric field and electric current, which are based on this current, induce good effects on materials in the die. The surface films of aluminum and pure WC powders are ruptured by the spark plasma. Pure AlN powder is sintered without sintering additives in the electric field. The spark plasma leaves discharge patterns on insulators. Organic fibers are etched by the spark plasma. Thermosetting polyimide is consolidated by the spark plasma. Insoluble polymonomethylsilane is rearranged into the soluble one by the spark plasma. A single crystal of CoSb{sub 3} is grown from the compound powders in the electric field by slow heating. Coupled crystals of eutectic powder are connected with each other in the electric field. (orig.)

  11. A new spark detection system for the electrostatic septa of the SPS North (experimental) Area

    CERN Multimedia

    Barlow, R A; Borburgh, J; Carlier, E; Chanavat, C; Pinget, B

    2013-01-01

    Electrostatic septa (ZS) are used in the extraction of the particle beams from the CERN SPS to the North Area experimental zone. These septa employ high electric fields, generated from a 300 kV power supply, and are particularly prone to internal sparking around the cathode structure. This sparking degrades the electric field quality, consequently affecting the extracted beam, vacuum and equipment performance. To mitigate these effects, a Spark Detection System (SDS) has been realised, which is based on an industrial SIEMENS S7-400 programmable logic controller and deported Boolean processors modules interfaced through a PROFINET fieldbus. The SDS interlock logic uses a moving average spark rate count to determine if the ZS performance is acceptable. Below a certain spark rate it is probable that the ZS septa tank vacuum can recover, thus avoiding transition into a\

  12. Satellite Power System (SPS): an Overview of Prospective Organizational Structures in the Solar Satellite Field

    Science.gov (United States)

    Edler, H. G.

    1978-01-01

    A literature survey, interviews with acknowledged experts in the fields of organizational entities, space, solar energy, and the SPS concept, and an analysis of these inputs to identify the organizational alternatives and make judgments as to their feasibility to serve as patterns for a future SPS entity are presented. Selection and evaluation criteria were determined to include timeliness, reliability, and adequacy to contribute meaningfully to the U.S. supply; political feasibility (both national and international) and cost-effectiveness (including environmental and other external costs). Based on these criteria, four organizational alternatives are discussed which offer reasonable promise as potential options for SPS. These included three domestic alternatives and one international alternative.

  13. SPS accelerating cavity

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    The SPS started up with 2 accelerating cavities (each consisting of 5 tank sections) in LSS3. They have a 200 MHz travelling wave structure (see 7411032 and 7802190) and 750 kW of power is fed to each of the cavities from a 1 MW tetrode power amplifier, located in a surface building above, via a coaxial transmission line. Clemens Zettler, builder of the SPS RF system, is standing at the side of one of the cavities. In 1978 and 1979 another 2 cavities were added and entered service in 1980. These were part of the intensity improvement programme and served well for the new role of the SPS as proton-antiproton collider. See also 7411032, 8011289, 8104138, 8302397.

  14. ADVANCED WORKER PROTECTION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Judson Hedgehock

    2001-03-16

    From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify

  15. ADVANCED WORKER PROTECTION SYSTEM

    International Nuclear Information System (INIS)

    Judson Hedgehock

    2001-01-01

    From 1993 to 2000, OSS worked under a cost share contract from the Department of Energy (DOE) to develop an Advanced Worker Protection System (AWPS). The AWPS is a protective ensemble that provides the user with both breathing air and cooling for a NIOSH-rated duration of two hours. The ensemble consists of a liquid air based backpack, a Liquid Cooling Garment (LCG), and an outer protective garment. The AWPS project was divided into two phases. During Phase 1, OSS developed and tested a full-scale prototype AWPS. The testing showed that workers using the AWPS could work twice as long as workers using a standard SCBA. The testing also provided performance data on the AWPS in different environments that was used during Phase 2 to optimize the design. During Phase 1, OSS also performed a life-cycle cost analysis on a representative clean up effort. The analysis indicated that the AWPS could save the DOE millions of dollars on D and D activities and improve the health and safety of their workers. During Phase 2, OSS worked to optimize the AWPS design to increase system reliability, to improve system performance and comfort, and to reduce the backpack weight and manufacturing costs. To support this design effort, OSS developed and tested several different generations of prototype units. Two separate successful evaluations of the ensemble were performed by the International Union of Operation Engineers (IUOE). The results of these evaluations were used to drive the design. During Phase 2, OSS also pursued certifying the AWPS with the applicable government agencies. The initial intent during Phase 2 was to finalize the design and then to certify the system. OSS and Scott Health and Safety Products teamed to optimize the AWPS design and then certify the system with the National Institute of Occupational Health and Safety (NIOSH). Unfortunately, technical and programmatic difficulties prevented us from obtaining NIOSH certification. Despite the inability of NIOSH to certify

  16. The Septum Magnet System of the New Fast Extraction Channel of the SPS at CERN

    CERN Document Server

    Balhan, B; Rizzo, A; Weterings, W

    2004-01-01

    In the Long Straight Section LSS4 of the Super Proton Synchrotron (SPS) at CERN, a new fast extraction system has been installed in order to extract the beam to ring 2 of the Large Hadron Collider (LHC) and the CERN Neutrino to Gran Sasso facility (CNGS). The system consists of horizontal closed orbit bumper magnets, extraction kicker magnets, enlarged aperture quadrupoles and six conventional DC electromagnetic septum magnets (MSE). A protection element (TPSG) has been placed immediately upstream of the first septum coil. The septum magnets and TPSG are mounted on a single mobile retractable support girder. The MSE septa are connected by a so-called plug-in system to a rigid water-cooled bus-bar, powered by water-cooled cables. The whole system is kept at the required vacuum pressure by ion pumps attached to separate pumping modules. In this note we present the design features and parameters of the MSE septum magnets, describe the function of the related main equipment elements, briefly report on the control...

  17. A new spark detection system for the electrostatic septa of the SPS North (experimental) Area

    CERN Document Server

    Barlow, R A; Borburgh, J; Carlier, E; Chanavat, C; Fowler, T; Pinget, B

    2014-01-01

    Electrostatic septa (ZS) are used in the extraction of the particle beams from the CERN SPS to the North Area experimental zone. These septa employ high electric fields, generated from a 300 kV power supply, and are particularly prone to internal sparking around the cathode structure. This sparking degrades the electric field quality, consequently affecting the extracted beam, vacuum and equipment performance. To mitigate these effects, a Spark Detection System (SDS) has been realised, which is based on an industrial SIEMENS S7-400 programmable logic controller and deported Boolean processor modules interfaced through a PROFINET fieldbus. The SDS interlock logic uses a moving average spark rate count to determine if the ZS performance is acceptable. Below a certain spark rate it is probable that the ZS septa tank vacuum can recover, thus avoiding transition into a state where rapid degradation would occur. Above this level an interlock is raised and the high voltage is switched off. Additionally, all spark si...

  18. NA61/SHINE facility at the CERN SPS: beams and detector system

    CERN Document Server

    Abgrall, N.; Aduszkiewicz, A.; Ali, Y.; Anticic, T.; Antoniou, N.; Baatar, B.; Bay, F.; Blondel, A.; Blumer, J.; Bogomilov, M.; Bogusz, M.; Bravar, A.; Brzychczyk, J.; Bunyatov, S.A.; Christakoglou, P.; Czopowicz, T.; Davis, N.; Debieux, S.; Dembinski, H.; Diakonos, F.; Di Luise, S.; Dominik, W.; Drozhzhova, T.; Dumarchez, J.; Dynowski, K.; Engel, R.; Efthymiopoulos, I.; Ereditato, A.; Fabich, A.; Feofilov, G.A.; Fodor, Z.; Fulop, A.; Gazdzicki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Haesler, A.; Hasegawa, T.; Hierholzer, M.; Idczak, R.; Igolkin, S.; Ivashkin, A.; Jokovic, D.; Kadija, K.; Kapoyannis, A.; Kaptur, E.; Kielczewska, D.; Kirejczyk, M.; Kisiel, J.; Kiss, T.; Kleinfelder, S.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kondratiev, V.P.; Korzenev, A.; Koversarski, P.; Kowalski, S.; Krasnoperov, A.; Kurepin, A.; Larsen, D.; Laszlo, A.; Lyubushkin, V.V.; Maćkowiak-Pawlowska, M.; Majka, Z.; Maksiak, B.; Malakhov, A.I.; Maletic, D.; Manglunki, D.; Manic, D.; Marchionni, A.; Marcinek, A.; Marin, V.; Marton, K.; Mathes, H.J; Matulewicz, T.; Matveev, V.; Melkumov, G.L.; Messina, M.; Mrówczyński, St.; Murphy, S.; Nakadaira, T.; Nirkko, M.; Nishikawa, K.; Palczewski, T.; Palla, G.; Panagiotou, A.D.; Paul, T.; Peryt, W.; Petukhov, O.; Pistillo, C.; Planeta, R.; Pluta, J.; Popov, B.A.; Posiadala, M.; Puławski, S.; Puzovic, J.; Rauch, W.; Ravonel, M.; Redij, A.; Renfordt, R.; Richter-Was, E.; Robert, A.; Röhrich, D.; Rondio, E.; Rossi, B.; Roth, M.; Rubbia, A.; Rustamov, A.; Rybczyński, M.; Sadovsky, A.; Sakashita, K.; Savic, M.; Schmidt, K.; Sekiguchi, T.; Seyboth, P.; Sgalaberna, D.; Shibata, M.; Sipos, R.; Skrzypczak, E.; Słodkowski, M.; Sosin, Z.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Stroebele, H.; Susa, T.; Szuba, M.; Tada, M.; Tereshchenko, V.; Tolyhi, T.; Tsenov, R.; Turko, L.; Ulrich, R.; Unger, M.; Vassiliou, M.; Veberic, D.; Vechernin, V.V.; Vesztergombi, G.; Vinogradov, L.; Wilczek, A.; Włodarczyk, Z.; Wojtaszek-Szwarz, A.; Wyszyński, O.; Zambelli, L.; Zipper, W.

    2014-01-01

    NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011. NA61/SHINE has greatly profited from the long development of the CERN proton and ion sources and the accelerator chain as well as the H2 beamline of the CERN North Area. The latter has recently been modified to also serve as a fragment separator as needed to produce the Be beams for NA61/SHINE. Numerous components of the NA61/SHINE set-up were inherited from its predecessors, in particular, the last one, the NA49 experiment. Important new detectors and upgrades of the legacy equipment were introduced by the NA61/SHINE Collaboration. This paper describes the state of the NA61/SHINE facility - the beams and the detector system - before the CERN Long Shutdown I, which started in March ...

  19. The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators control system

    CERN Document Server

    Van den Eynden, M

    1995-01-01

    The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete Xenix PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specification for the new PowerPC technology, the re-engineering aspects, the interfaces with other CERN wide projects, and the set up of a development environment. This project offers also support for other major SPS and LEP projects interested in the PowerPC microprocessor technology.

  20. The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators system

    CERN Document Server

    Charrue, P; Ghinet, F; Ribeiro, P

    1995-01-01

    The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete XENIX PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specification for the new PowerPC technology, the re-engineering aspects, the interfaces with other CERN wide projects, and the set up of a development environment. This project offers also support for other major SPS and LEP projects interested in the PowerPC microprocessor technology.

  1. Simulation of e-cloud driven instability and its attenuation using a simulated feedback system in the CERN SPS

    International Nuclear Information System (INIS)

    Vay, J.-L.; Furman, M.A.

    2010-01-01

    Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS, and a feedback system to control the single-bunch instabilities is under active development. We present the latest improvements to the WARP-POSINST simulation framework and feedback model, and its application to the self-consistent simulations of two consecutive bunches interacting with an electron cloud in the SPS. Simulations using an idealized feedback system exhibit adequate mitigation of the instability providing that the cutoff of the feedback bandwidth is at or above 450 MHz. Artifacts from numerical noise of the injected distribution of electrons in the modeling of portions of bunch trains are discussed, and benchmarking of WARP against POSINST and HEADTAIL are presented.

  2. Environmental assessment for the Satellite Power System (SPS) Concept Development and Evaluation Program (CDEP). [Microwave and non-microwave health and ecological assessment

    Energy Technology Data Exchange (ETDEWEB)

    Valentino, A.R.

    1980-08-01

    In the satellite power system (SPS), satellites in geosynchronous earth orbit would collect solar energy in space, convert it to microwaves, and transmit the microwaves to receiving antennas (rectennas) on earth. At the rectennas, the microwave energy would be converted to electricity. This SPS environmental assessment considers the microwave and nonmicrowave effects on the terrestrial environment and human health, atmospheric effects, and effects on electromagnetic systems. No environmental problem has been identified that would preclude the continued study of SPS technology. To increase the certainty of the assessment, some research has been initiated and long-term research is being planned.

  3. SPS microwave subsystem potential impacts and benefits. [environmental and societal effects of Solar Power System construction and operation

    Science.gov (United States)

    Dickinson, R. M.

    1978-01-01

    The paper examines the possible environmental and societal effects of the construction, installation, and operation of the space end and earth end of the microwave power transmission subsystem that delivers satellite power system (SPS) energy (at about 5 GW per beam) to the power grid on earth. The intervening propagation medium near the earth is also considered. Separate consideration is given to the spacecraft transmitting array, propagation in the ionosphere, and the ground-based rectenna. Radio frequency interference aspects are also discussed.

  4. Design and installation of the MSE septum system in the new LSS4 extraction channel of the SPS

    CERN Document Server

    Balhan, B; Guinand, R; Luiz, F; Rizzo, A; Weterings, W; CERN. Geneva. AB Department

    2003-01-01

    For the extraction of the beam from the Super Proton Synchrotron (SPS) to ring 2 of the Large Hadron Collider (LHC) and the CERN Neutrino to Gran Sasso (CNGS) facility, a new fast-extraction system has been installed in the long straight section LSS4 of the SPS. Besides extraction bumpers, enlarged aperture quadrupoles and extraction kicker magnets (MKE), six conventional DC septum magnets (MSE) are used. These magnets are mounted on a single mobile retractable support girder, which is motorised in order to optimise the local SPS aperture during setting up. The MSE septa are connected by a so-called plug-in system to a rigid water-cooled bus bar, which itself is powered by water-cooled cables. In order to avoid destruction of the septum magnet coils by direct impact of the extracted beam, a dilution element (TPSG) has been placed immediately upstream of the first septum coil. The whole system is kept at the required vacuum pressure by ion pumps attached to separate modules (MP). In this note we present the de...

  5. Satellite Power Systems (SPS) concept definition study (Exhibit D). Volume 5: Systems engineering/integration research and technology

    Science.gov (United States)

    Hanley, G. M.

    1981-01-01

    Guidelines and ground rules followed in the development of requirements for the SPS are presented. Development planning objectives are specified in each of these areas, and evolutionary SPS program scenarios are described for the various concepts studied during the past one year contract. Program descriptions are presented as planning packages of technical tasks, and schedule phasing. Each package identifies the ground based technology effort that will facilitate SPS definitions, designs, development, and operations.

  6. The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators control system

    OpenAIRE

    Van den Eynden, M

    1995-01-01

    The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete Xenix PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specificatio...

  7. The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators system

    OpenAIRE

    Charrue, P; Bland, A; Ghinet, F; Ribeiro, P

    1995-01-01

    The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete XENIX PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specificatio...

  8. Workshop on Satellite Power Systems (SPS) effects on optical and radio astronomy

    International Nuclear Information System (INIS)

    Stokes, G.M.; Ekstrom, P.A.

    1980-04-01

    The impacts of the SPS on astronomy were concluded to be: increased sky brightness, reducing the effective aperture of terrestrial telescopes; microwave leakage radiation causing erroneous radioastronomical signals; direct overload of radioastronomical receivers at centimeter wavelengths; and unintentional radio emissions associated with massive amounts of microwave power or with the presence of large, warm structures in orbit causing the satellites to appear as individual stationary radio sources; finally, the fixed location of the geostationary satellite orbits would result in fixed regions of the sky being unusable for observations

  9. Solar power satellite system definition study. Volume 7, phase 1: SPS and rectenna systems analyses

    Science.gov (United States)

    1979-01-01

    A systems definition study of the solar power satellite systems is presented. The design and power distribution of the rectenna system is discussed. The communication subsystem and thermal control characteristics are described and a failure analysis performed on the systems is reported.

  10. Outsourcing the development of specific application software using the ESA software engineering standards the SPS software Interlock System

    CERN Document Server

    Denis, B

    1995-01-01

    CERN is considering outsourcing as a solution to the reduction of staff. To need to re-engineer the SPS Software Interlock System provided an opportunity to explore the applicability of outsourcing to our specific controls environment and the ESA PSS-05 standards were selected for the requirements specification, the development, the control and monitoring and the project management. The software produced by the contractor is now fully operational. After outlining the scope and the complexity of the project, a discussion on the ESA PSS-05 will be presented: the choice, the way these standards improve the outsourcing process, the quality induced but also the need to adapt them and their limitation in the definition of the customer-supplier relationship. The success factors and the difficulties of development under contract will also be discussed. The maintenance aspect and the impact on in-house developments will finally be addressed.

  11. SPS in training for LHC

    CERN Document Server

    2003-01-01

    On 8 and 9 September the new beam extraction system of the SPS and the downstream transfer line were successfully commissioned and tested. Using this extraction, a beam will be sent towards LHC in 2004 and to the CNGS facility in 2006.

  12. Satellite power system (SPS). Rectenna siting: availability and distribution of nominally eligible sites

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    Siting of 60 ground receiving stations (rectennas) for the SPS may pose a problem due to the large area per rectenna (15,000 hectares, 38,000 acres) and numerous siting constraints. This study analyzes areas potentially eligible for rectenna sites by mapping, at a national scale, those conditions which would preclude rectenna construction. These exclusion variables which reflect restricted lands, topography, safety, national policy and electromagnetic (microwave) effects, have been computer encoded and tabulated. Subsequent analysis of the nine electric power planning regions that make up the contiguous states indicate an apparently adequate number of nominally eligible sites in all regions in comparison to projected electrical generation. Eligibility in this context means only that areas were not excluded in this national level analysis; more detailed investigation may reveal purely local constraints or smaller scale exclusions. A second major qualification relates to small isolated eligible areas. Eliminating individual eligible clusters with less than nine times the area of one rectenna eliminates much of the Eastern US; a four-to-one adjacent eligible area test poses no such problem. An independant study of the placement of 60 nominal sites in relation to projected load centers reveals that, even with modest transmission distances, the supply of eligible areas is not a key constraint, except perhaps in the Mid-Atlantic (Electric Reliability) Council Region. Even when several less critical (potential) exclusions are considered, more than 19% of the US is eligible; every region except Mid-Atlantic has at least 50 times an many eligible sites as are required.

  13. SPS measures and possible market access implications for agricultural trade in the Doha Round: An analysis of systemic issues

    OpenAIRE

    Murali Kallummal

    2012-01-01

    Even as the Doha Round seeks to address tariff liberalization issues in a comprehensive manner, the imbalance in the outcome of market access for developing country exporters will be particularly glaring in the case of fresh agricultural and processed food products. There is growing evidence that protectionism from the usage of non-tariff barriers such as SPS measures has increased tremendously in the recent past. This paper discusses an analysis of the SPS notifications made by WTO Member co...

  14. Visiting the SPS installation

    CERN Multimedia

    1975-01-01

    ...., Guenther Loehr, Hans Horisberger walk along the SPS tunnel: here, on the right, an absorber block of 22 tons for beam dumping in the external beam lines. The chariot serves for the installation of the block.

  15. SPS Quadrupole Magnets

    CERN Multimedia

    1974-01-01

    A stack of SPS Quadrupole Magnets ready for installation in the tunnel. The SPS uses a total of 216 laminated normal conducting lattice quadrupoles with a length of 3.13 m for the core, 3.3 m overall. The F and D quads. have identical characteristics: inscribed circle radius 44 mm, core height and width 800 mm, maximum gradient 20 Tesla/m.

  16. Initial assessment: electromagnetic compatibility aspects of proposed SPS Microwave Power Transmission System (MPTS) operations

    Energy Technology Data Exchange (ETDEWEB)

    1978-02-01

    An analysis of major concerns with regard to the effects on radio and electronic systems by the proposed Microwave Power Transmission System for transmitting power from a satellite solar power station to earth is presented. (LCL)

  17. Health and safety. Preliminary comparative assessment of the satellite power system (SPS) and other energy alternatives

    International Nuclear Information System (INIS)

    Habegger, L.J.; Gasper, J.R.; Brown, C.D.

    1980-04-01

    Existing data on the health and safety risks of a satellite power system and four electrical generation systems are analyzed: a combined-cycle coal power system with a low-Btu gasifier and open-cycle gas turbine, a fission power system with fuel reprocessing, a central-station, terrestrial, solar-photovoltaic power system, and a first-generation design for a fusion power system. The systems are compared on the basis of expected deaths and person-days lost per year associated with 1000 MW of average electricity generation and the number of health and safety risks that are identified as potentially significant but unquantifiable. The appendices provide more detailed information on risks, uncertainties, additional research needed, and references for the identified impacts of each system

  18. Health and safety: Preliminary comparative assessment of the Satellite Power System (SPS) and other energy alternatives

    Science.gov (United States)

    Habegger, L. J.; Gasper, J. R.; Brown, C.

    1980-01-01

    Data readily available from the literature were used to make an initial comparison of the health and safety risks of a fission power system with fuel reprocessing; a combined-cycle coal power system with a low-Btu gasifier and open-cycle gas turbine; a central-station, terrestrial, solar photovoltaic power system; the satellite power system; and a first-generation fusion system. The assessment approach consists of the identification of health and safety issues in each phase of the energy cycle from raw material extraction through electrical generation, waste disposal, and system deactivation; quantitative or qualitative evaluation of impact severity; and the rating of each issue with regard to known or potential impact level and level of uncertainty.

  19. Methodology for the comparative assessment of the Satellite Power System (SPS) and alternative technologies

    Energy Technology Data Exchange (ETDEWEB)

    Wolsko, T.; Buehring, W.; Cirillo, R.; Gasper, J.; Habegger, L.; Hub, K.; Newsom, D.; Samsa, M.; Stenehjem, E.; Whitfield, R.

    1980-01-01

    A description of the initial methodology for the Comparative Assessment of the Satellite Power System Concept Development and Evaluation Program of NASA and DOE is presented. Included are study objectives, issue identification, units of measurement, methods, and data bases. The energy systems concerned are the satellite power system, several coal technologies, geothermal energy, fission, fusion, terrestrial solar systems, and ocean thermal energy conversion. Guidelines are suggested for the characterization of these systems, side-by-side analysis, alternative futures analysis, and integration and aggregation of data. The bulk of this report is a description of the methods for assessing the technical, economic, environmental, societal, and institutional issues surrounding the development of the selected energy technologies.

  20. Compilation and assessment of microwave bioeffects. Final report. A selective review of the literature on biological effects of microwaves in relation to the Satellite Power System (SPS)

    Energy Technology Data Exchange (ETDEWEB)

    Justesen, D.R.; Ragan, H.A.; Rogers, L.E.; Guy, A.W.; Hjeresen, D.L.; Hinds, W.T.; Phillips, R.D.

    1978-05-01

    One of many alternate sources of electrical energy that are being considered by the Department of Energy is a microwave-mediated Satellite Power System (SPS). Once inserted into geosynchronous orbit at an altitude of more than 40,000 kilometers, a satellite would collect then convert the sun's energy to 2450-MHz microwaves, which would be beamed to the Earth's surface, where a rectifying antenna (rectenna) would convert the microwaves to electrical current suitable for industrial and domestic use. The expanse of each rectenna (about 10 by 13 kilometers), the power density of the continuous-wave microwave beam (approx. 23 mW/cm/sup 2/ at center, with fall off to 1 mW/cm/sup 2/ or less at the periphery of the rectenna), and the possibility that 20 or more satellite systems will eventually be operating, creates two sets of interrelated problems for biological/ecological assessment. These are 1) the effects of microwave fields of higher intensity on airborne biota (including human beings in aircraft) that may traffic the area above the rectenna and 2) the effects of virtually perpetual fields of much lower intensity on all forms of life at and beyond the rectennae's zone of exclusion. In this review, the scientific literature is examined, not only for biological effects that are pertinent to assessment of SPS, but for hiatuses of knowledge that will have to be filled before SPS can be vouched for operational safety.

  1. A Common Software-Configuration Management System for CERN SPS and LEP Accelerators and Technical Services

    CERN Document Server

    Hatziangeli, Eugenia; Bragg, A E; Ninin, P; Patino, J; Sobczak, H

    2000-01-01

    Software-configuration management activities are crucial to ensure the integrity of current operational software and the quality of new software either being developed at CERN or outsourced. The functionality of the present management system became insufficient with large maintenance overheads. In order to improve our situation, a new software-configuration management system has been set up. It is based on Razor R, a commercial tool, which supports the management of file versions and operational software releases, along with integrated problem-reporting capabilities. In addition to the basic tool functionality, automated procedures were custom-made for the installation and distribution of operational software. The system ensures that, at all times, the status and location of all deliverable versions are known, the state of shared objects is carefully controlled and unauthorized changes prevented. This paper outlines the reasons for selecting the chosen tool, the implementation of the system and the final goal...

  2. A Common Software Configuration Management System for CERN SPS and LEP Accelerators and Technical Services

    CERN Document Server

    Hatziangeli, Eugenia; Bragg, A E; Ninin, P; Patino, J; Sobczak, H

    1999-01-01

    Software configuration management activities are crucial to assure the integrity of current operational and the quality of new software either being developed at CERN or outsourced. The functionality of the present management system became insufficient with large maintenance overheads. In order to improve our situation, a new software configuration management system has been set up. It is based on Razor, a commercial tool, which supports the management of file versions and operational software releases, along with integrated problem reporting capabilities. In addition to the basic tool functionality, automated procedures were custom made, for the installation and distribution of operational software. Policies were developed and applied over the software development life cycle to provide visibility and control. The system ensures that, at all times, the status and location of all deliverable versions are known, the state of shared objects is carefully controlled and unauthorised changes prevented. It provides ...

  3. Satellite Power System (SPS) mapping of exclusion areas for rectenna sites

    Science.gov (United States)

    Blackburn, J. B., Jr.; Bavinger, B. A.

    1978-01-01

    The areas of the United States that were not available as potential sites for receiving antennas that are an integral part of the Satellite Power System concept are presented. Thirty-six variables with the potential to exclude the rectenna were mapped and coded in a computer. Some of these variables exclude a rectenna from locating within the area of its spatial influence, and other variables potentially exclude the rectenna. These maps of variables were assembled from existing data and were mapped on a grid system.

  4. SPS RF Accelerating Cavity

    CERN Multimedia

    1979-01-01

    This picture shows one of the 2 new cavities installed in 1978-1979. The main RF-system of the SPS comprises four cavities: two of 20 m length and two of 16.5 m length. They are all installed in one long straight section (LSS 3). These cavities are of the travelling-wave type operating at a centre frequency of 200.2 MHz. They are wideband, filling time about 700 ns and untuned. The power amplifiers, using tetrodes are installed in a surface building 200 m from the cavities. Initially only two cavities were installed, a third cavity was installed in 1978 and a forth one in 1979. The number of power amplifiers was also increased: to the first 2 MW plant a second 2 MW plant was added and by end 1979 there were 8 500 kW units combined in pairs to feed each of the 4 cavities with up to about 1 MW RF power, resulting in a total accelerating voltage of about 8 MV. See also 7412016X, 7412017X, 7411048X

  5. SPS slow extraction septa

    CERN Multimedia

    CERN PhotoLab

    1979-01-01

    SPS long straight section (LSS) with a series of 5 septum tanks for slow extraction (view in the direction of the proton beam). There are 2 of these: in LSS2, towards the N-Area; in LSS6 towards the W-Area. See also Annual Report 1975, p.175.

  6. SPS commemorative stamp

    CERN Multimedia

    1977-01-01

    The turn on of the SPS was commemorated in France by the issue of a CERN stamp. The date of issue, 22 Octber 1976, coincided with the first tests of the beam line taking particles to experiments in the West Hall. (CERN Courier 1976 p. 382)

  7. SPS rectifier stations

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    The first of the twelves SPS rectifier stations for the bending magnets arrived at CERN at the end of the year. The photograph shows a station with the rectifiers on the left and in the other three cubicles the chokes, capacitors and resistor of the passive filter.

  8. SPS injection kicker magnet

    CERN Document Server

    1975-01-01

    One of the first-generation SPS injection kicker magnets. Lifting the tank-lid reveals the inner structure. For a more detailed description see 7502072X. See also 7502074X and Annual Report 1975, p.162. To the left: Roland Tröhler; to the right: Giacomo Busetta.

  9. Integrated open source mine workers compensation system

    CSIR Research Space (South Africa)

    Coetzee, L

    2006-08-01

    Full Text Available This article describes the Mine Workers Compensation System developed by the CSIR and Molepe Consulting for the South African Department of Health. Mining activities increase the risk of certain occupational lung diseases. South African legislation...

  10. High power semiconductor switches in the 12 kV, 50 kA pulse generator of the SPS beam dump kicker system

    CERN Document Server

    Bonthond, J; Faure, P; Vossenberg, Eugène B

    2001-01-01

    Horizontal deflection of the beam in the dump kicker system of the CERN SPS accelerator is obtained with a series of fast pulsed magnets. The high current pulses of 50 kA per magnet are generated with capacitor discharge type generators which, combined with a resistive free-wheel diode circuit, deliver a critically damped half-sine current with a rise-time of 25 ms. Each generator consists of two 25 kA units, connected in parallel to a magnet via a low inductance transmission line.

  11. New control architecture for the SPS accelerator at CERN

    International Nuclear Information System (INIS)

    Kissler, K.H.; Rausch, R.

    1992-01-01

    The Control System for the 450 Gev proton accelerator SPS at CERN was conceived and implemented some 18 years ago. The 16 Bit minicomputers with their proprietary operating system and interconnection with a dedicated network do not permit the use of modern workstations, international communication standards and industrial software packages. The upgrading of the system has therefore become necessary. After a short review of the history and the current state of the SPS control system, the paper describes how CERN's new control architecture, which will be common to all accelerators, will be realized at the SPS. The migration path ensuring a smooth transition to the final system is outlined. Once the SPS upgrade is complete and following some enhancements to the LEP control system, the operator in the SPS/LEP control center will be working in a single uniform control environment. (author)

  12. SPS batch spacing optimisation

    CERN Document Server

    Velotti, F M; Carlier, E; Goddard, B; Kain, V; Kotzian, G

    2017-01-01

    Until 2015, the LHC filling schemes used the batch spac-ing as specified in the LHC design report. The maximumnumber of bunches injectable in the LHC directly dependson the batch spacing at injection in the SPS and hence onthe MKP rise time.As part of the LHC Injectors Upgrade project for LHCheavy ions, a reduction of the batch spacing is needed. In thisdirection, studies to approach the MKP design rise time of150ns(2-98%) have been carried out. These measurementsgave clear indications that such optimisation, and beyond,could be done also for higher injection momentum beams,where the additional slower MKP (MKP-L) is needed.After the successful results from 2015 SPS batch spacingoptimisation for the Pb-Pb run [1], the same concept wasthought to be used also for proton beams. In fact, thanksto the SPS transverse feed back, it was already observedthat lower batch spacing than the design one (225ns) couldbe achieved. For the 2016 p-Pb run, a batch spacing of200nsfor the proton beam with100nsbunch spacing wasreque...

  13. Energy and system size dependence of Ξ- and anti Ξ+ production in relativistic heavy-ion collisions at the CERN SPS

    International Nuclear Information System (INIS)

    Mitrovski, M.K.

    2007-01-01

    The strong nuclear force is described by Quantum Chromodynamics (QCD), the parallel field theory to Quantum Electrodynamics (QED) that describes the electromagnetic force. It is propagated by gluons analogously to photons in the electromagnetic force, but unlike photons, which do not carry electric charge, gluons carry color, and they can self-interact. However, as individual quarks have never been observed in nature, it is postulated that the color charge itself is confined, and hence all baryons and mesons must be colorless objects. To study nuclear matter under extreme conditions, it is necessary to create hot and dense nuclear matter in the laboratory. In such conditions the confinement between quarks and gluons is cancelled (deconfinement). This state is characterized with a quasi-free behavior of quarks and gluons. The strange (s) and anti-strange (anti-s) quarks are not contained in the colliding nuclei, but are newly produced and show up in the strange hadrons in the final state. It was suggested that strange particle production is enhanced in the QGP with respect to that in a hadron gas. This enhancement is relative to a collision where a transition to a QGP phase does not take place, such as p+p collisions where the system size is very small. Therefore the energy- and system size dependence is studied to receive a picture about the initial state. In this thesis experimental results on the energy- and system size dependence of Xi hyperon production at the CERN SPS is shown. All measurements were performed with the NA49 detector at the CERN SPS. NA49 took central lead-lead collisions from 20 - 158 AGeV, minimus bias lead-lead collisions at 40 and 158 AGeV, and semi-central silicon-silicon collisions at 158 AGeV. The NA49 experiment features a large acceptance in the forward hemisphere allowing for measurements of Xi rapidity spectra. At the SPS accelerator at CERN Pb+Pb collisions are performed with beam energies to 158 AGeV. The analyzed data sets were

  14. Energy and system size dependence of {xi}{sup -} and anti {xi}{sup +} production in relativistic heavy-ion collisions at the CERN SPS

    Energy Technology Data Exchange (ETDEWEB)

    Mitrovski, M.K.

    2007-11-21

    The strong nuclear force is described by Quantum Chromodynamics (QCD), the parallel field theory to Quantum Electrodynamics (QED) that describes the electromagnetic force. It is propagated by gluons analogously to photons in the electromagnetic force, but unlike photons, which do not carry electric charge, gluons carry color, and they can self-interact. However, as individual quarks have never been observed in nature, it is postulated that the color charge itself is confined, and hence all baryons and mesons must be colorless objects. To study nuclear matter under extreme conditions, it is necessary to create hot and dense nuclear matter in the laboratory. In such conditions the confinement between quarks and gluons is cancelled (deconfinement). This state is characterized with a quasi-free behavior of quarks and gluons. The strange (s) and anti-strange (anti-s) quarks are not contained in the colliding nuclei, but are newly produced and show up in the strange hadrons in the final state. It was suggested that strange particle production is enhanced in the QGP with respect to that in a hadron gas. This enhancement is relative to a collision where a transition to a QGP phase does not take place, such as p+p collisions where the system size is very small. Therefore the energy- and system size dependence is studied to receive a picture about the initial state. In this thesis experimental results on the energy- and system size dependence of Xi hyperon production at the CERN SPS is shown. All measurements were performed with the NA49 detector at the CERN SPS. NA49 took central lead-lead collisions from 20 - 158 AGeV, minimus bias lead-lead collisions at 40 and 158 AGeV, and semi-central silicon-silicon collisions at 158 AGeV. The NA49 experiment features a large acceptance in the forward hemisphere allowing for measurements of Xi rapidity spectra. At the SPS accelerator at CERN Pb+Pb collisions are performed with beam energies to 158 AGeV. The analyzed data sets were

  15. The CERN 400 GeV proton synchrotron (CERN SPS)

    International Nuclear Information System (INIS)

    Adams, J.B.

    1977-01-01

    The main characteristics of the CERN 400 GeV proton synchrotron (SPS) has described. Beam intensity averages about 5x10 12 protons per pulse. The CERN 28 GeV proton synchrotron serves as an injector for the SPS. There are 108 magnet periods in the machine with a phase shift per period of π/2. The magnet system consists of 800 dipoles with 1.8 T magnetic field and 216 quadrupoles with a field gradient of 20.7 T (per meter). The frequency chosen for the RF system of the SPS is 200 MHz. Two beam extraction systems are installed in the SPS, one to feed protons to the West Experimental Area, and the other to feed protons to the North Experimental Area. The planned development of the machine in the next few years has described. The cost per GeV of the SPS works out 3 to 4 times less than that of the CPS

  16. Prospects for the study of the {tau}-System in SPS1a' at the ILC

    Energy Technology Data Exchange (ETDEWEB)

    Bechtle, P.; Berggren, M.; List, J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Stempel, O. [Univ. Hamburg, Inst. fuer Experimentalphysik (Germany); Schade, P. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Univ. Hamburg, Inst. fuer Experimentalphysik (Germany)

    2009-08-15

    The prospects for the analysis of {tau} channels at the SUSY benchmark point SPS1a', especially from e{sup +}e{sup -} {yields} {tau}{sub 1}{sup +}{tau}{sub 1}{sup -} and e{sup +}e{sup -} {yields} {tau}{sub 2}{sup +}{tau}{sub 2}{sup -}, have been studied in full simulation of the ILD detector concept forseen for the International Linear Collider. All accessible SUSY channels as well as all Standard Model backgrounds were generated at a centre-of-mass energy E{sub CMS}=500 GeV, including the beam energy spectrum and beam backgrounds expected for nominal ILC beam parameters. With an integrated luminosity of 500 fb{sup -1} delivered to the experiment, the masses of the {tau}{sub 1} and {tau}{sub 2} can be measured to 107.69{sub -0.06}{sup +0.03} GeV{+-}1.1 . {delta}M{sub {chi}{sub 1}{sup 0}} and 183{sub -5}{sup +11} GeV{+-}18 . {delta}M{sub {chi}{sub 1}{sup 0}}, respectively, while the true values in SPS1a' are 107.9 GeV and 194.9 GeV, respectively. The cross sections for {tau}{sub 1} and {tau}{sub 2} pair production could be obtained with a precision of 3.1 % and 4.2 %, respectively. Combining the mass and cross section measurement in the {tau}{sub 2} channel allows to determine the LSP mass with a relative error of 1.7 %, assuming a known mixing angle. In {tau}{sub 1} {yields} {tau}{chi}{sub 1}{sup 0} decays, the {tau} polarisation is measured to be 91{+-}9 % and 87.0{+-}3.4 % in the {pi} and {rho} decay channels of the {tau}, respectively. The true value in the simulated SPS1a' sample is 89.6 %. (orig.)

  17. SPS: scrubbing or coating ?

    CERN Document Server

    Jimenez, J M

    2012-01-01

    The operation of the SPS with high intensity bunched beams is limited by the electron cloud building-up in both the arcs and long straight sections. Two consolidation options have been considered: mitigation of the electron cloud using coatings or relying, as before, on the scrubbing runs. A status report on both options will be given with a particular emphasis on measurements plans for 2012 and pending issues. The testing needs, corresponding beam parameters and MD time in 2012 will be addressed. The criteria for the decision making and the corresponding schedule will be discussed.

  18. SPS: scrubbing or coating?

    International Nuclear Information System (INIS)

    Jimenez, J.M.

    2012-01-01

    The operation of the SPS with high intensity bunched beams is limited by the electron cloud building-up in both the arcs and long straight sections. Two consolidation options have been considered: suppression of the electron cloud build-up using coatings or relying, as before, on the scrubbing mitigation. A status report on both options will be given with a particular emphasis on measurements plans for 2012 and pending issues. The testing needs, corresponding beam parameters and MD time in 2012 will be addressed. The criteria for the decision making and the corresponding schedule will be discussed. (author)

  19. Pattern of the rational worker incentive system

    Directory of Open Access Journals (Sweden)

    Kopytova A.V.

    2017-01-01

    Full Text Available The article presents a model of rational incentive system with the structure consisting of three blocks. The first block (financial incentives provides monetary compensation to a worker. The second block (stimulating by comfortable living conditions is aimed to regulate the quality of a worker’s life in and outside the place he works. The third block (non-financial incentives takes into account cultural and social worker’s needs. The proposed structure of incentive system provides the most comprehensive coverage to the employee’s needs and organizes them in the way accessible both for specialists of labor economics and human resource management and for ordinary workers.

  20. Mission critical database for SPS accelerator measurements

    CERN Document Server

    Billen, R; Laugier, I; Reguero, I; Segura, N

    1995-01-01

    In order to maintain efficient control over the hadron and lepton beams in CERN¹s SPS accelerator, measurements are of vital importance. Beam parameters such as intensities, positions and losses need to be rapidly available in the SPS control room to allow the operators to monitor, judge and act on beam physics conditions. For the 1994 SPS startup, a completely new and redesigned measurement system based on client and server C-programs running on UNIX-workstations was introduced. The kernel of this new measurement system is an on-line ORACLE database.The NIAM method was used for the database design as well as a technique to tag synchronized data with timeslots instead of timestamps. A great attention was paid to proper storage allocation for tables and indices since this has a major impact on the efficiency of the database, due to its time-critical nature. Many new features of Oracle7 were exploited to reduce the surrounding software.During the 1994 SPS physics run, this new measurement system was commission...

  1. A new SPS programme

    CERN Document Server

    Gazdzicki, Marek; Christakoglou, P.; Diakonos, F.; Panagiotou, A.D.; Petridis, A.; Vassiliou, M.; Cafagna, F.; Catanesi, M.G.; Montaruli, T.; Radicioni, E.; Rohrich, D.; Boldizsar, L.; Fodor, Z.; Laszlo, A.; Palla, G.; Szentpetery, I.; Vesztergombi, G.; Cleymans, J.; Brzychczyk, J.; Katrynska, N.; Karabowicz, R.; Majka, Z.; Planeta, R.; Staszel, P.; Baatar, B.; Kolesnikov, V.I.; Malakhov, A.I.; Melkumov, G.L.; Sissakian, A.N.; Sorin, Alexander Savelievich; Rauch, W.; Gazdzicki, M.; Lungwitz, B.; Mitrovski, M.; Renfordt, R.; Schuster, T.; Strabel, C.; Stroebele, H.; Blondel, A.; Bravar, A.; Di Marco, M.; Blumer, J.; Engel, R.; Haungs, A.; Meurer, C.; Roth, M.; Gazdzicki, M.; Korus, R.; Mrowczynski, St.; Rybczynski, M.; Seyboth, P.; Stefanek, G.; Wlodarczyk, Z.; Wojtaszek, A.; Guber, F.; Kurepin, A.; Ivashkin, A.; Maevskaya, A.; Andrieu, B.; Dumarchez, J.; Choi, K.-U.; Kim, J.-H.; Yi, J.-G.; Yoo, I.-K.; Kolev, D.; Tsenov, R.; Asryan, A.G.; Derkach, D.A.; Feofilov, G.A.; Igolkin, S.; Ivanov, A.S.; Kolevatov, R.S.; Kondratiev, V.P.; Naumenko, P.A.; Vechernin, V.V.; Chung, P.; Lacey, R.; Taranenko, A.; Kobayashi, T.; Nakadaira, T.; Sakashita, K.; Sekiguchi, T.; Grebieszkow, K.; Kikola, D.; Peryt, W.; Pluta, J.; Slodkowski, M.; Szuba, M.; Anticic, T.; Kadija, K.; Nikolic, V.; Susa, T.

    2006-01-01

    A new experiemntal program to study hadron production in hadron-nucleus and nucleus-nucleus collisions at the CERN SPS has been recently proposed by the NA49-future collaboration. The physics goals of the program are: (i) search for the critical point of strongly interacting matter and a study of the properties of the onset of deconfinemnt in nucleus-nucleus collisions, (ii) measurements of correlations, fluctuations and hadron spectra at high transverse momentum in proton-nucleus collisions needed as for better understanding of nucleus-nucleus results, (iii) measurements of hadron production in hadron-nucleus interactions needed for neutrino (T2K) and cosmic-ray (Pierre Auger Observatory and KASCADE) expriments. The physics of the nucleus-nucleus program is reviewed in this presentation.

  2. Physics at the SPS

    Science.gov (United States)

    Gatignon, L.

    2018-05-01

    The CERN Super Proton Synchrotron (SPS) has delivered a variety of beams to a vigorous fixed target physics program since 1978. In this paper, we restrict ourselves to the description of a few illustrative examples in the ongoing physics program at the SPS. We will outline the physics aims of the COmmon Muon Proton Apparatus for Structure and Spectroscopy (COMPASS), north area 64 (NA64), north area 62 (NA62), north area 61 (NA61), and advanced proton driven plasma wakefield acceleration experiment (AWAKE). COMPASS studies the structure of the proton and more specifically of its spin. NA64 searches for the dark photon A', which is the messenger for interactions between normal and dark matter. The NA62 experiment aims at a 10% precision measurement of the very rare decay K+ → π+νν. As this decay mode can be calculated very precisely in the Standard Model, it offers a very good opportunity to look for new physics beyond the Standard Model. The NA61/SHINE experiment studies the phase transition to Quark Gluon Plasma, a state in which the quarks and gluons that form the proton and the neutron are de-confined. Finally, AWAKE investigates proton-driven wake field acceleration: a promising technique to accelerate electrons with very high accelerating gradients. The Physics Beyond Colliders study at CERN is paving the way for a significant and diversified continuation of this already rich and compelling physics program that is complementary to the one at the big colliders like the Large Hadron Collider.

  3. Construction Worker Fatigue Prediction Model Based on System Dynamic

    OpenAIRE

    Wahyu Adi Tri Joko; Ayu Ratnawinanda Lila

    2017-01-01

    Construction accident can be caused by internal and external factors such as worker fatigue and unsafe project environment. Tight schedule of construction project forcing construction worker to work overtime in long period. This situation leads to worker fatigue. This paper proposes a model to predict construction worker fatigue based on system dynamic (SD). System dynamic is used to represent correlation among internal and external factors and to simulate level of worker fatigue. To validate...

  4. Potential interest in Europe in SPS development

    Energy Technology Data Exchange (ETDEWEB)

    Reinhartz, K K

    1980-06-01

    The Solar Satellite Power System is a concept whereby large solar-energy converters are placed in outer space and the electrical energy produced is transmitted back to earth as microwave radiation. A number of studies, performed mainly in the United States, are aimed at assessing the technical, economic, social and health aspects of this concept. This paper does not address the feasibility of the SPS as such, but discusses the potential contribution that an SPS could make to the European energy scenario, the economic impact of the SPS as an indigenous European energy source, and the potential importance of the SPS as a technology driver. A European network of forty solar power satellites could supply electrical energy equal to Europe's present electrical energy production and significantly reduce Europe's dependence on energy imports. Additionally the development of a power satellite technology, if started by the United States, is expected to lead to such an advancement in technology in key areas, e.g., space industrialisation, photovoltaic energy conversion and wireless transmission of energy, that Europe would rapidly lose technical competence in many important fields if it were not to participate.

  5. Construction Worker Fatigue Prediction Model Based on System Dynamic

    Directory of Open Access Journals (Sweden)

    Wahyu Adi Tri Joko

    2017-01-01

    Full Text Available Construction accident can be caused by internal and external factors such as worker fatigue and unsafe project environment. Tight schedule of construction project forcing construction worker to work overtime in long period. This situation leads to worker fatigue. This paper proposes a model to predict construction worker fatigue based on system dynamic (SD. System dynamic is used to represent correlation among internal and external factors and to simulate level of worker fatigue. To validate the model, 93 construction workers whom worked in a high rise building construction projects, were used as case study. The result shows that excessive workload, working elevation and age, are the main factors lead to construction worker fatigue. Simulation result also shows that these factors can increase worker fatigue level to 21.2% times compared to normal condition. Beside predicting worker fatigue level this model can also be used as early warning system to prevent construction worker accident

  6. The environmental impact of SPS - A social view

    International Nuclear Information System (INIS)

    Canough, G.E.; Lehman, L.P.

    1991-01-01

    Prospective solar power satellite (SPS) systems entail extensive evaluation of real and perceived environmental impact, in virtue of their extremely high publicity profile. Attention is presently given to current understanding of SPS microwave power beaming system operations' effects on terrestrial communications and biological systems, as well as the associated consequences of a lengthy, heavy-payload launch program on space debris scenarios and stratospheric pollution by the launch vehicles' propellant combustion products. Education of the public in these issues is stressed. 7 refs

  7. Tune Resonance Phenomena in the SPS and related Machine Protection

    CERN Document Server

    Baer, Tobias; Elsen, E

    2010-01-01

    The Super Proton Synchrotron (SPS) at CERN, with a peak energy of 450 GeV, is at the top of the LHC preaccelerator complex. SPS is at present the accelerator with the largest stored beam energy worldwide of up to 2.5 MJ. In 2008, a fast equipment failure led to an uncontrolled loss of a high intensity beam at an integer tune resonance, which resulted in major damage of a main dipole. Experimental studies and simulations provide clear understanding of the beam dynamics at different SPS tune resonances, that can lead to a complete beam loss in as little as 3 turns. Dedicated experiments of fast failures of the main power converters reveal that the current interlock systems are much too slow for an adequate machine protection. A new position interlock system, which is currently in the commissioning phase, will counteract the vulnerability of the SPS.

  8. Women's Experience in the Workers' Compensation System.

    Science.gov (United States)

    Guthrie, Robert; Jansz, Janis

    2006-09-01

    Gender differences is a question of major importance within workers' compensation given the increased role of women in the workforce over the past several decades. This article reviews literature relating to women's experiences following work injury. An Australian study is used as background to exploring the broad issue of the question of gender equity in workers' compensation. In doing so it takes account of historical, legal and medical issues. Women's experience in the workers' compensation system is different to that of men due to a range of factors. It is heavily influenced by the industrial environment in which they work. Women are paid less than men in many instances and work in gender-segregated circumstances, which often reduces their industrial bargaining power. Women also suffer different forms of injury and disease to men because of the different nature of their work. The Australian experience suggests that as a consequence of the combination of lesser industrial bargaining power, lower wages and differing forms of injury and disease women often receive less than men in compensation payments, struggle to obtain equity in the dispute resolution process and experience greater difficulties in returning to work following injury or disease.

  9. Immune system investigations for radiation workers

    International Nuclear Information System (INIS)

    Obreja, Doina; Tulbure, Rodica; Marinescu, Irina

    2001-01-01

    During the last decade a great deal of attention has been paid to the research in the field of the immune system. Some important steps forward have been achieved in understanding the mechanisms of action and control of the immunologic responses. At the same time the concern for the possible health effects of exposure to ionizing radiation has considerably increased. On the purpose of the evaluation of the modifications induced by the ionizing radiation for radiation workers, we have applied the method of lymphocytic subpopulations, a method that evinces the proportions for the various subtypes of lymphocytes having different roles within the immune system. A number of 62 persons, employees of the Institute of Physics and Nuclear Engineering at Bucharest - Magurele were involved in this study. All radiation workers from 2 departments characterized by a high exposure to ionizing radiation were included, as follows: Group no. 1, consisting of 20 persons working at RWTS (Radioactive Waste Treating Station), thus presenting both external and internal irradiation; Group no. 2, consisting of 18 persons working at RPC (Radioactive Isotopes Preparing Center), a place where besides the radioactive contamination, the chemical risk was also present. The control group (consisting of 24 persons) was formed of employees from the same institute, with the difference that they were not radiation workers. For the statistical processing of the results the programs EPI INFO 6 and CIA were used. Significantly, when analyzing globally the lymphocytic modifications for TT and/or B lymphocytes (either increments or decrements when compared to the normal values), a noticeable statistical difference among the groups in terms of the frequency of the immune system modifications (Hi square test p=0.001) occurs. The results are in accordance to those in special literature mentioning age as a factor having a role in the appearance of the immune modifications. The obtained results indicate a

  10. SPS completes LS1 activities

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    On 27 June, the SPS closed its doors to the LS1 engineers, bringing to an end almost 17 months of activities. The machine now enters the hardware-testing phase in preparation for an October restart.   Photo 1: The SPS transfer tunnel, TT10, reinforced with steal beams. Having completed their LS1 activities right on schedule (to the day!), the SPS team is now preparing the machine for its restart. Over the next eight weeks, hardware tests of the SPS dipole and quadrupole power converters will be underway, led by the TE-EPC (Electrical Power Converters) team. "OP start-up test activities will also be running in parallel, utilising the off hours when EPC is not using the machine," says David McFarlane, the SPS technical coordinator from the Engineering Department. "The primary beam testing phase will start at the beginning of September, once hardware tests and DSO safety tests have been completed." It has been a long journey to this point, with several major...

  11. Healing or harming? Healthcare provider interactions with injured workers and insurers in workers' compensation systems.

    Science.gov (United States)

    Kilgour, Elizabeth; Kosny, Agnieszka; McKenzie, Donna; Collie, Alex

    2015-03-01

    Healthcare providers (HCPs) are influential in the injured worker's recovery process and fulfil many roles in the delivery of health services. Interactions between HCPs and insurers can also affect injured workers' engagement in rehabilitation and subsequently their recovery and return to work. Consideration of the injured workers' perceptions and experiences as consumers of medical and compensation services can provide vital information about the quality, efficacy and impact of such systems. The aim of this systematic review was to identify and synthesize published qualitative research that focused on the interactions between injured workers, HCPs and insurers in workers' compensation systems in order to identify processes or interactions which impact injured worker recovery. A search of six electronic databases for literature published between 1985 and 2012 revealed 1,006 articles. Screening for relevance identified 27 studies which were assessed for quality against set criteria. A final 13 articles of medium and high quality were retained for data extraction. Findings were synthesized using a meta-ethnographic approach. Injured workers reported that HCPs could play both healing and harming roles in their recovery. Supportive patient-centred interaction with HCPs is important for injured workers. Difficult interactions between HCPs and insurers were highlighted in themes of adversarial relations and organisational pressures. Insurer and compensation system processes exerted an influence on the therapeutic relationship. Recommendations to improve relationships included streamlining administrative demands and increasing education and communication between the parties. Injured workers with long term complex injuries experience difficulties with healthcare in the workers' compensation context. Changes in insurer administrative demands and compensation processes could increase HCP participation and job satisfaction. This in turn may improve injured worker recovery

  12. The on-line repair, improvement and expansion of a working multicomputer control system for the CERN SPS accelerator

    International Nuclear Information System (INIS)

    Altaber, J.; Beck, F.; Collins, M.; Crowley-Milling, M.C.; Rausch, R.

    1979-01-01

    The 400 GeV proton synchrotron at CERN was first commissioned in 1976. Those of its features which are pertinent to the design of the control system are summarized. The paper then proceeds as follows: changes to the control system (changes to applications programs, equipment handling routines, system software changes); hardware increases and repairs; changes to the character of the system (hardware changes, microprocessors); conclusions. (U.K.)

  13. SPS Abundance - Salmon Population Summary Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data contained in the SPS database are primarily summary data, compiled at the population level and available through the SPS website...

  14. Installation in the SPS tunnel

    CERN Multimedia

    1974-01-01

    The SPS tunnel is 6910 m in circumference and has a cross section of 4 m inner diameter. It is situated at an elevation of 400 m above sea level at a depth below the surface varying between 23 and 65 m. Its walls are lined with a concrete shell of about 30 cm thickness. See also 7410043X

  15. SPS Ion Induced Desorption Experiment

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    This experiment will give a study about the induced desorption from heavy ion (Indium ion run from week 45 in SPS T4-H8 area) impacting LHC type graphite collimator. 4 different samples are located in the 4 chambers 90° one to each other: pure graphite, graphite with copper coating, graphite with NEG coating, 316LN stainless steal (reference).

  16. Satellite Power Systems (SPS) concept definition study. Volume 5: Special emphasis studies. [rectenna and solar power satellite design studies

    Science.gov (United States)

    Hanley, G. M.

    1980-01-01

    Satellite configurations based on the Satellite Power System baseline requirements were analyzed and a preferred concept selected. A satellite construction base was defined, precursor operations incident to establishment of orbital support facilities identified, and the satellite construction sequence and procedures developed. Rectenna construction requirement were also addressed. Mass flow to orbit requirements were revised and traffic models established based on construction of 60 instead of 120 satellites. Analyses were conducted to determine satellite control, resources, manufacturing, and propellant requirements. The impact of the laser beam used for space-to-Earth power transmission upon the intervening atmosphere was examined as well as the inverse effect. The significant space environments and their effects on spacecraft components were investigated to define the design and operational limits imposed by the environments on an orbit transfer vehicle. The results show that LEO altitude 300 nmi and transfer orbit duration 6 months are preferrable.

  17. Social Workers' Role in the Canadian Mental Health Care System

    Science.gov (United States)

    Towns, Ashley M.; Schwartz, Karen

    2012-01-01

    Objective: Using Canadian survey data this research provides social workers in Canada with a better understanding of their role in the Canadian mental health care system. Methods: By analyzing data from the Canadian Community Health Survey, Cycle 1.2 Mental Health and Well-being, the role of social workers in the Canadian mental health system was…

  18. SPS Machine Protection Incident in 2009

    CERN Document Server

    Wenninger, J

    2009-01-01

    During the 008 SPS run a single machine operation incident happened on June 27th when a high intensity CNGS beam was lost in a dipole of sextant 1 following a time system ‘freeze’. The vacuum chamber was punctured over a length of over 10 cm, and the vacuum in the affected sector rose to atmospheric pressure. The dipole was exchanged June 30th. This note describes the incident in detail and presents the measures taken to avoid a similar incident in the future.

  19. Stacks of SPS Dipole Magnets

    CERN Multimedia

    1974-01-01

    Stacks of SPS Dipole Magnets ready for installation in the tunnel. The SPS uses a separated function lattice with dipoles for bending and quadrupoles for focusing. The 6.2 m long normal conducting dipoles are of H-type with coils that are bent-up at the ends. There are two types, B1 (total of 360) and B2 (384). Both are for a maximum field of 1.8 Tesla and have the same outer dimensions (450x800 mm2 vxh) but with different gaps (B1: 39x129 mm2, B2: 52x92 mm2) tailored to the beam size. The yoke, made of 1.5 mm thick laminations, consists of an upper and a lower half joined together in the median plane once the coils have been inserted.

  20. Final report of the SPS space transportation workshop

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    After a brief description of space power system concepts and the current status of the SPS program, issues relevant to earth-surface-to-low-earth-orbit (ESLEO) and orbit-to-orbit transport are discussed. For ESLEO, vehicle concepts include shuttle transportation systems, heavy lift launch vehicles, and single-stage-to-orbit vehicles. Orbit transfer vehicle missions include transport of cargo and the SPS module from low earth orbit to geosynchronous earth orbit as well as personnel transport. Vehicles discussed for such missions include chemical rocket orbital transfer vehicles, and electric orbital transfer vehicles. Further discussions include SPS station-keeping and attitude control, intra-orbit transport, and advanced propulsion and vehicle concepts. (LEW)

  1. Advanced worker protection system. Topical report, Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Myers, J.

    1995-07-01

    The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. The DOE believes that existing technologies are inadequate to solve many challenging problems such as how to decontaminate structures and equipment cost effectively, what to do with materials and wastes generated, and how to adequately protect workers and the environment. Preliminary estimates show a tremendous need for effective use of resources over a relatively long period (over 30 years). Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This project will result in the development of an Advanced Worker Protection System (AWPS). The AWPS will be built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with advanced protective garments, advanced liquid cooling garment, respirator, communications, and support equipment to provide improved worker protection, simplified system, maintenance, and dramatically improve worker productivity through longer duration work cycles.

  2. SPS transverse beam scraping and LHC injection losses

    CERN Document Server

    Drosdal, L; Bartmann, W; Bracco, C; Cornelis, K; Goddard, B; Meddahi, M; Veyrunes, E

    2012-01-01

    Machine protection sets strict requirements for the quality of the injected beam, in particular in the transverse plane. Losses at aperture restrictions and protection elements have to be kept at a minimum. Particles in the beam tails are lost at the tight transfer line collimators and can trigger the LHC beam abort system. These particles have to be removed by scrapers in the vertical and horizontal plane in the SPS. Scraping has become vital for high intensity LHC operation. This paper shows the dependence of injection quality on the SPS scraping and discusses an improved scraper setting up strategy for better reproducibility with the current scraper system.

  3. A Beam Quality Monitor for LHC Beams in the SPS

    CERN Document Server

    Papotti, G

    2008-01-01

    The SPS Beam Quality Monitor (BQM) system monitors the longitudinal parameters of the beam before extraction to the LHC to prevent losses and degradation of the LHC luminosity by the injection of low quality beams. It is implemented in two priority levels. At the highest level the SPS-LHC synchronization and global beam structure are verified. If the specifications are not met, the beam should be dumped in the SPS before extraction. On the second level, individual bunch position, length and stability are checked for beam quality assessment. Tolerances are adapted to the mode of operation and extraction to the LHC can also be inhibited. Beam parameters are accessed by acquiring bunch profiles with a longitudinal pick up and fast digital oscilloscope. The beam is monitored for instabilities during the acceleration cycle and thoroughly checked a few ms before extraction for a final decision on extraction interlock. Dedicated hardware and software components implementing fast algorithms are required. In this pape...

  4. Considerations on a new fast extraction kicker concept for SPS

    CERN Document Server

    Barnes, M

    2010-01-01

    An alternative extraction kicker concept is investigated for the SPS, based on open C-type kickers and a fast-bumper system. The beam is moved into the kicker gap some tens of ms before extraction. The concept is illustrated in detail with the LSS4 extraction from the SPS – very similar parameters and considerations apply to LSS6. A similar concept could also be conceived for injection but is more difficult due to the larger beam size. The technical issues are presented and the potential impact on the machine impedance outlined.

  5. Conditions and requirements for a potential application of solar power satellites /SPS/ for Europe

    Energy Technology Data Exchange (ETDEWEB)

    Westphal, W. (Berlin, Technische Universitaet, Berlin, West Germany); Ruth, J. (ESA, European Space Research and Technology Centre, Noordwijk, Netherlands)

    1980-12-01

    The potential problems of a future introduction of Solar Power Satellites (SPS) as baseload power plants for Western European countries are considered, emphasizing the differences of SPS utilization in Europe compared with that in the USA as a result of geographical, orbital organizational, and industrial conditions. If estimated SPS safety zone areas are required, then the SPS system incorporating the 2.45 GHz microwave power transmission appears crucial for utilization in Western Europe in order to eliminate the large rectenna area requirements of an SPS 5 GW power system. A frequency variation of up to 5 or 10 GHz, and the application of either laser power transmission or solid state devices which could alleviate rectenna siting problems and restrictions on the use of the geosynchronous orbit are discussed.

  6. How Building Systems Affect Worker Wellness

    Science.gov (United States)

    1994-03-01

    spatial configuration must strike a balance between the objective needs of the organization and the more subjective human ingredient. Good building...sense, building design for thermal comfort involves a balance between the building’s orientation, its windowing scheme, the use of thermal mass, and the...stated above. An improved quality of worklife and a humanized work environment are psychological incentives that can increase productivity. Worker specific

  7. A utility perspective on radiation worker access control systems

    International Nuclear Information System (INIS)

    Watson, B.A.; Goff, T.E.

    1984-01-01

    Based on an evaluation of the current commercial Radiation Worker Access Control Software Systems, Baltimore Gas and Electric Company has elected to design and develop a site specific access control and accountability system for the Calvert Cliffs Nuclear Power Plant. The vendor provided systems allow for radiation worker access control based on training and external exposure records and authorizations. These systems do not afford internal exposure control until after bioassay measurements or maximum permissible concentration-hours are tabulated. The vendor provided systems allow for data trending for ALARA purposes, but each software package must be modified to meet site specific requirements. Unlike the commercial systems, the Calvert Cliffs Radiological Controls and Accountability System (RCAS) will provide radiation worker exposure control, both internal and external. The RCAS is designed to fulfill the requirements by integrating the existing Radiation Safety, Dosemetry, and Training data bases with a comprehensive radiological surveillance program. Prior to each worker's entry into the Radiological Control Area; his training and qualifications, radiation exposure history and authorization, will be compared with administrative controls, such as radiation work permits, and respiratory protection requirements and the radiological conditions in the work area. The RCAS, a computer based applied health physics access control system is described as it is presently configured for development. The mechanisms for enhancing worker internal and external exposure controls are discussed. Proposed data application to both the Calvert Cliffs ALARA and outage planning programs is included

  8. Mobile health monitoring system for community health workers

    CSIR Research Space (South Africa)

    Sibiya, G

    2014-09-01

    Full Text Available of hypertension as it provides real time information and eliminates the need to visit a healthcare facility to take blood pressure readings. Our proposed mobile health monitoring system enables faster computerization of data that has been recorded... pressure, heart rate and glucose readings. These reading closely related to most common NCDs. D. Feedback to health worker and the subject of care Community health workers are often not professionally trained on health. As a result they are not expected...

  9. Study of infrastructure considerations for microwave energy ground receiving stations. Satellite Power System (SPS) offshore rectenna siting study in western Europe. An executive summary. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bresters, A.R.

    1980-11-01

    The feasibility of offshore rectenna sites in the North Sea based on a reference SPS concept of 5 GW was investigated. Site criteria include a 20 km wide safety zone between the site and the shore, a 300 km limit to centers of power consumption, and a water depth of 30 m. Artificial islands, polders, atolls and exposed gravity or jacket structures were considered. Only the island and polder concept permit antenna installation without modifications to the reference design. The polder concept was selected, costing half that of the artificial island (160 km sq). Construction material requirements are given for the dikes. Total construction time is 8.5 years. Costs range between 4.7 and 5.4 billion in 1980 dollars, or $0.02 per kw hr over 30 years. (ESA)

  10. The experimental programme of the SPS

    CERN Document Server

    Kluyver, J C

    1977-01-01

    Early success with the CERN 28 GeV proton synchrotron (PS) prompted three questions about the future. Which areas of high energy particle physics would offer the best chance of progress, and with which accelerators? Which detectors would be needed? What experiments would be most likely to succeed? About 1963 it was suggested that the PS be extended with intersecting storage rings (ISR), and a 300 GeV SPS be built. By 1971 the ISR was ready for experiments, and the SPS proposal approved. At the present time the SPS programme comprises 28 experiments in the West Hall. (0 refs).

  11. Longitudinal Space Charge in the SPS

    CERN Document Server

    Lasheen, Alexandre

    2016-01-01

    Longitudinal instabilities due to the SPS beam coupling impedance are a major issue for future projects and it is essential to have an accurate SPS impedance model to study them. The longitudinal space charge effect can be modelled by a pure reactive impedance and should also be included in simulations as it may have an impact at low energy. In this Note, the effect of the longitudinal space charge in the SPS is evaluated by taking into account the variation of the transverse beam size and vacuum chamber geometry along the ring. Scaling laws are used to investigate what are the most important parameters for the evaluation of the longitudinal space charge impedance.

  12. Plan of SPS to LHC transfer tunnels

    CERN Multimedia

    Laurent Guiraud

    2001-01-01

    This diagram shows the LHC and the SPS pre-accelerator (in blue) and the transfer lines that will connect them (in red). Spanning the France-Swiss border (shown by green crosses), the 27-km LHC tunnel will receive a beam that has been pre-accelerated to 450 GeV in the smaller SPS storage ring. The transfer lines will remove each beam from the SPS and inject them into the LHC where they will be accelerated to the full energy of 7 TeV.

  13. Feasibility study of stochastic cooling of bunches in the SPS

    International Nuclear Information System (INIS)

    Boussard, D.; Chattopadhyay, S.; Dome, G.; Linnecar, T.

    1984-01-01

    The average luminosity of the SPS collider could be improved if the slow blow-up of transverse emittances due to beam-beam and intrabeam scattering effects were to be reduced by a transverse cooling system. We examine the parameters of such a system and propose a technological approach which seems better suited to the case of a few bunches circulating in a large machine. (orig./HSI)

  14. SPS, preassembly of short straight sections

    CERN Multimedia

    1975-01-01

    Short straight sections were preassembled with their vacuum chambers, ready for installation in the SPS. Here we see two, containing sextupoles for chromaticity adjustment. See also 7501017, 7501018, and Annual Report 1976, p.174.

  15. SPS, short straight section with sextupole

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    Short straight sections were preassembled with their vacuum chambers, ready for installation in the SPS. This one contains a sextupole for chromaticity adjustment. See also 7501017, 7501009X, and Annual Report 1974, p.174.

  16. SPS Beam Steering for LHC Extraction

    Energy Technology Data Exchange (ETDEWEB)

    Gianfelice-Wendt, Eliana [Fermilab; Bartosik, Hannes [CERN; Cornelis, Karel [CERN; Norderhaug Drøsdal, Lene [CERN; Goddard, Brennan [CERN; Kain, Verena [CERN; Meddahi, Malika [CERN; Papaphilippou, Yannis [CERN; Wenninger, Jorg [CERN

    2014-07-01

    The CERN Super Proton Synchrotron accelerates beams for the Large Hadron Collider to 450 GeV. In addition it produces beams for fixed target facilities which adds complexity to the SPS operation. During the run 2012-2013 drifts of the extracted beam trajectories have been observed and lengthy optimizations in the transfer lines were performed to reduce particle losses in the LHC. The observed trajectory drifts are consistent with the measured SPS orbit drifts at extraction. While extensive studies are going on to understand, and possibly suppress, the source of such SPS orbit drifts the feasibility of an automatic beam steering towards a “golden” orbit at the extraction septa, by means of the interlocked correctors, is also being investigated. The challenges and constraints related to the implementation of such a correction in the SPS are described. Simulation results are presented and a possible operational steering strategy is proposed.

  17. Beam measurements of the SPS longitudinal impedance

    CERN Document Server

    Lasheen, A

    2017-01-01

    Longitudinal instabilities are one of the main limitationsin the CERN SPS to reach the beam parameters requiredfor the High Luminosity LHC project. In preparation tothe SPS upgrade, possible remedies are studied by perform-ing macroparticle simulations using the machine impedancemodel obtained from electromagnetic simulations and mea-surements. To benchmark the impedance model, the resultsof simulations are compared with various beam measure-ments. In this study, the reactive part of the impedance wasprobed by measuring the quadrupole frequency shift withintensity, obtained from bunch length oscillations at mis-matched injection into the SPS. This method was appliedover many last years to follow up the evolution of the SPSimpedance, injecting bunches with the same bunch length.A novel approach, giving significantly more information,consists in varying the injected bunch length. The compari-son of these measurements with macroparticle simulationsallowed to test the existing model and identify some missingSPS i...

  18. ROMANIAN PENSION SYSTEMS AND LABOR SUPPLY OF OLDER WORKERS

    Directory of Open Access Journals (Sweden)

    Cristina CIURARU-ANDRICA

    2013-11-01

    Full Text Available Prolonging working lives, in the context of an ageing population, has been seen as a good way to improve, on the one hand, the financial sustainability of the public pension system and, on the other hand, the adequacy of the pension benefit. As the literature has shown, even when measures for extending working lives have been taken, the characteristics of the national pension system (especially those of public pension system deliberately or inherently affected the labor market exit of older workers. Thus, through an econometric analysis, we estimate the relationship between the participation rate of Romanian older workers and certain characteristics of the Romanian pension systems (but not only, hoping to complement a more general literature on the effects of pension systems on retirement decision.

  19. Assessment of the effects of the zero gravity environment on the health and safety of space workers

    Science.gov (United States)

    1980-01-01

    A review was conducted of currently available information relating to adverse effects to the health and safety that space power system (SPS) space workers may experience. Currently available information on the responses of humans to space flight is somewhat limited and was obtained under conditions which are grossly different from conditions to be experienced by future space workers. The limitations in information and differences in conditions were considered in the assessment of potential health and safety hazards to the SPS space workers. The study did not disclose any adverse effects that would result in long term deviations to the medical physiological health of space workers so long as proper preventive or ameliorating action were taken.

  20. Special radio call signal, HW6SPS, used on the SPS Inauguration Day

    CERN Multimedia

    Sagnell, Bengt

    1977-01-01

    CERN had been given a special French call sign for the occasion - HW6SPS - which was used over the weekend to contact a large number of amateur stations in Europe and world-wide to spread the happy message. The stations were manned by ~10 licensed amateur radio operators in SPS.

  1. The damper for the transverse instabilities of the SPS

    CERN Document Server

    Bossart, Rudolf; Gareyte, Jacques; de Raad, Bastiaan; Rossi, V

    1979-01-01

    For beam intensities above 10/sup 12/ protons per pulse in the SPS, collective transverse beam instabilities develop with frequencies between 15 kHz and 3 MHz because of the resistive wall effect of the vacuum chamber. An active feedback system with an electrostatic deflector has been installed in the SPS for damping the resistive wall instabilities in both the vertical and horizontal planes. Measurements have been made to determine the threshold and growth rate of these instabilities. As a novel application, the damper can be used also for the excitation of small coherent betatron oscillations. A phase-locked loop tracks the beam oscillations and provides a continuous display of the betatron wave-number Q during the cycle. (4 refs).

  2. Emittance growth in coast in the SPS

    CERN Document Server

    Alekou, A; Bartosik, H; Calaga, R

    2017-01-01

    The CERN SPS will be used as a test-bed for the LHCprototype crab-cavities, which will be installed and testedin the SPS in 2018. As the time available for experimen-tal beam dynamics studies with the crab cavities installedin the machine will be limited, a very good preparation isrequired in advance. One of the main concerns is the in-duced emittance growth, driven by phase jitter in the crabcavities. In this respect, several machine development (MD)studies were performed during the past years to quantifyand characterize the emittance evolution of proton beamsin coast in the SPS. In these proceedings, the experimentalobservations from past years are summarized and the MDstudies from 2016 are presented. Finally, a proposal for anexperimental program for 2017 is discussed.

  3. European sail tower SPS [Solar Power Satellite] concept

    Energy Technology Data Exchange (ETDEWEB)

    Seboldt, W.; Leipold, M.; Hanowski, N. [Institute of Space Sensor Technology and Planetary Exploration, Cologne (Germany). German Aerospace Center; Klimke, M. [HOPE Worldwide Deutschland, Berlin (Germany)

    2001-06-01

    Based on a DLR-study in 1998/99 on behalf of ESA/ESTEC called ''System Concepts, Architectures and Technologies for Space Exploration and Utilization (SE and U)'' a new design for an Earth-orbiting Solar Power Satellite (SPS) has been developed. The design is called ''European Sail Tower SPS'' and consists mainly of deplorable sail-like structures derived from the ongoing DLR/ESA solar sail technology development activity. Such an SPS satellite features an extremely light-weight and large tower-like orbital system and could supply Europe with significant amounts of electrical power generated by photovoltaic cells and subsequently transmitted to earth via microwaves. In order to build up the sail tower, 60 units - each consisting of a pair of square-shaped sails - are moved from LEO to GEO with electric propulsion and successively assembled in GEO robotically on a central strut. Each single sail has dimensions of 150 m x 150 m and is automatically deployed, using four diagonal lightweight carbon fiber (CFRP) booms which are initially rolled up on a central hub. The electric thrusters for the transport to GEO could also be used for orbit and attitude control of the assembled tower which has a total length of about 15 km and would be mainly gravity gradient stabilized. Employing thin film solar cell technology, each sail is used as a solar array and produces an electric power in orbit of about 3.7 MW{sub e}. A microwave antenna with a diameter of 1 km transmits the power to a 10 km rectenna on the ground. The total mass of this 450 MW SPS is about 2100 tons. First estimates indicate that the costs for one kWh delivered in this way could compete with present day energy costs, if launch costs would decrease by two orders of magnitude. Furthermore, mass production and large numbers of installed SPS systems must be assumed in order to lower significantly the production costs and to reduce the influence of the expensive technology

  4. Prinsip Transparansi dalam Perjanjian TBT dan SPS

    Directory of Open Access Journals (Sweden)

    Dina Widyaputri Kariodimedjo

    2012-02-01

    Full Text Available Transparency principle in the TBT and SPS Agreement is implemented by notification. Its application is prepared by related agencies through the making of regulations, establishment of enquiry points, building capacity and infrastructure. It guarantees certainty, predictability and credibility of Indonesia in international trade, and its application should not undermine national trade policy. Prinsip transparansi dalam Perjanjian TBT dan SPS diterapkan melalui notifikasi. Penerapan prinsip ini dilakukan oleh instansi-instansi terkait melalui pembuatan peraturan, upaya terkait kelembagaan, SDM dan infrastruktur. Prinsip yang bertujuan menciptakan kepastian, konsistensi bagi perdagangan dan kredibilitas Indonesia dalam perdagangan internasional, harus dilakukan tanpa mengorbankan kepentingan untuk mengamankan kebijakan impor nasional.

  5. Prototyping Real-Time Control in the SPS

    CERN Document Server

    Andersson, J; Jensen, L; Jones, R; Lamont, M; Wenninger, J; Wijnands, Thijs; CERN. Geneva. AB Department

    2003-01-01

    Real-time control of beam related parameters will be required in the LHC. In order to gain experience of the issues involved in implementing distributed real-time control over large distances, a prototype local orbit feedback system is being developed in the SPS. This will use 6 pickups, each equipped with the full LHC acquisition electronics chain and linked to a real-time communication and feedback system. This reports summarises the .rst tests performed with this system in October 2002, where the data from four pickups was successfully acquired and displayed at 10 Hz in the control room.

  6. Experiment NA57 at the CERN SPS

    Czech Academy of Sciences Publication Activity Database

    Antinori, F.; Balada, A.; Barbera, R.; Píška, Karel; Staroba, Pavel; Závada, Petr

    1999-01-01

    Roč. 25, - (1999), s. 473-479 ISSN 0954-3899 Institutional research plan: CEZ:AV0Z1010920 Keywords : NA57 * production of strange, multistrange particles * baryons, antibaryons * ultrarelativistic nucleus - nucleus collisions * SPS * strangeness enhancement * number of participants Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 1.620, year: 1999

  7. Dilution kicker for the SPS beam dump

    CERN Multimedia

    1974-01-01

    In order to reduce thermal stress on the SPS dump material, the fast-ejected beam was swept horizontally across the dump. This was done with the "dilution kicker" MKDH, still in use at the time of writing. The person on the left is Manfred Mayer. See also 7404072X.

  8. Event-by-event fluctuations at SPS

    CERN Document Server

    Appelshauser, Harald; Adamova, D.; Agakichiev, G.; Belaga, V.; Braun-Munzinger, P.; Castillo, A.; Cherlin, A.; Damjanovic, S.; Dietel, T.; Dietrich, L.; Drees, A.; Esumi, S.I.; Filimonov, K.; Fomenko, K.; Fraenkel, Z.; Garabatos, C.; Glassel, P.; Hering, G.; Holeczek, J.; Kushpil, V.; Lenkeit, B.; Ludolphs, W.; Maas, A.; Marn, A.; Milosevic, J.; Milov, A.; Miskowiec, D.; Panebrattsev, Yu.; Petchenova, O.; Petracek, V.; Pfeiffer, A.; Rak, J.; Ravinovich, I.; Rehak, P.; Schmitz, W.; Schukraft, J.; Sedykh, S.; Shimansky, S.; Slvova, J.; Stachel, J.; Sumbera, M.; Tilsner, H.; Tserruya, Itzhak; Wessels, J.P.; Wienold, T.; Windelband, B.; Wurm, J.P.; Xie, W.; Yurevich, S.; Yurevich, V.; Appelshauser, Harald; Sako, Hiro

    2005-01-01

    Results on event-by-event fluctuations of the mean transverse momentum and net charge in Pb-Au collisions, measured by the CERES Collaboration at CERN-SPS, are presented. We discuss the centrality and beam energy dependence and compare our data to cascade calculations.

  9. The SPS Beam quality monitor, from design to operation

    CERN Document Server

    Papotti, G; Follin, F; Shaposhnikova, E

    2011-01-01

    The SPS Beam Quality Monitor is a system that monitors longitudinal beam parameters on a cycle-by-cycle basis and prevents extraction to the LHC in case the specifications are not met. This avoids losses, unnecessary stress of machine protection components and luminosity degradation, additionally helping efficiency during the filling process. The system has been operational since the 2009 LHC run, checking the beam pattern, its correct position with respect to the LHC references, individual bunch lengths and stability. In this paper the algorithms used, the hardware implementation and the operational aspects are presented.

  10. Integration of virtualized worker nodes in standard batch systems

    International Nuclear Information System (INIS)

    Buege, Volker; Kunze, Marcel; Oberst, Oliver; Quast, Guenter; Scheurer, Armin; Hessling, Hermann; Kemp, Yves; Synge, Owen

    2010-01-01

    Current experiments in HEP only use a limited number of operating system flavours. Their software might only be validated on one single OS platform. Resource providers might have other operating systems of choice for the installation of the batch infrastructure. This is especially the case if a cluster is shared with other communities, or communities that have stricter security requirements. One solution would be to statically divide the cluster into separated sub-clusters. In such a scenario, no opportunistic distribution of the load can be achieved, resulting in a poor overall utilization efficiency. Another approach is to make the batch system aware of virtualization, and to provide each community with its favoured operating system in a virtual machine. Here, the scheduler has full flexibility, resulting in a better overall efficiency of the resources. In our contribution, we present a lightweight concept for the integration of virtual worker nodes into standard batch systems. The virtual machines are started on the worker nodes just before jobs are executed there. No meta-scheduling is introduced. We demonstrate two prototype implementations, one based on the Sun Grid Engine (SGE), the other using Maui/Torque as a batch system. Both solutions support local job as well as Grid job submission. The hypervisors currently used are Xen and KVM, a port to another system is easily envisageable. To better handle different virtual machines on the physical host, the management solution VmImageManager is developed. We will present first experience from running the two prototype implementations. In a last part, we will show the potential future use of this lightweight concept when integrated into high-level (i.e. Grid) work-flows.

  11. SPS Internship: Working With Physics To Go

    Science.gov (United States)

    Hancock, Logan

    2008-10-01

    The Physics To Go website (www.physicstogo.com) is one of many collections of ComPADRE, an online library of electronic resources devoted to physics and astronomy education, funded by the National Science Foundation. Physics To Go, produced by the American Physical Society (APS), is a collection focused on informal physics learning, targeted towards self-motivated learners and the general public. My contributions to the site this summer consisted of obtaining useful materials to add to the collection and working to update the homepage's ``mini-magazine'' every two weeks. I was selected for this position at APS by the Society of Physics Students (SPS) summer internship program, hosted by the American Institute of Physics (AIP) in College Park, MD. This internship is presented to a number of physics undergraduates each year and offers opportunities in research and science policy/outreach positions at SPS, APS, AAPT, NASA, and NIST.

  12. The CERN SPS proton–antiproton collider

    CERN Document Server

    Schmidt, Rudiger

    2016-01-01

    One of CERN's most ambitious and successful projects was the search for the intermediate bosons, W and Z [1]. The accelerator part of the project relied on a number of innovations in accelerator physics and technology. The invention of the method of stochastic cooling and the extension by many orders of magnitude beyond the initial proof of principle demonstration allowed the construction of the Antiproton Accumulator. Major modifications to the 26 GeV PS complex and the conversion of the 300 GeV SPS, which had just started up as an accelerator, to a collider were required. The SPS collider had to master the beam–beam effect far beyond limits reached before and had to function in a tight symbiosis with the UA1 and UA2 experiments.

  13. Impedance Characterisation of the SPS Wire Scanner

    CERN Document Server

    AUTHOR|(CDS)2091911; Prof. Sillanpää, Mika

    As a beam diagnostic tool, the SPS wire scanner interacts with the proton bunches traversing the vacuum pipes of the Super Proton Synchrotron particle accelerator. Following the interaction, the bunches decelerate or experience momentum kicks off-axis and couple energy to the cavity walls, resonances and to the diagnostic tool, the scanning wire. The beam coupling impedance and, in particular, the beam induced heating of the wire motivate the characterisation and redesign of the SPS wire scanner. In this thesis, we characterise RF-wise the low frequency modes of the SPS wire scanner. These have the highest contribution to the impedance. We measure the cavity modes in terms of resonance frequency and quality factor by traditional measurement techniques and data analysis. We carry out a 4-port measurement to evaluate the beam coupling to the scanning wire, that yields the spectral heating power. If combined with the simulations, one is able to extract the beam coupling impedance and deduce the spectral dissipa...

  14. Prototype Environmental Assessment of the impacts of siting and construction of an SPS ground receiving station

    Science.gov (United States)

    Hill, J.

    1980-01-01

    A prototype assessment of the environmental impacts of siting and constructing a Satellite Power System (SPS) Ground Receiving Station (GRS) is reported. The objectives of the study were: (1) to develop an assessment of the nonmicrowave related impacts of the reference system SPS GRS on the natural environment; (2) to assess the impacts of GRS construction and operations in the context of actual baseline data for a site in the California desert; and (3) to identify critical GRS characteristics or parameters that are most significant in terms of the natural environment.

  15. Tune resonance phenomena in the SPS and machine protection via fast position interlocking

    CERN Document Server

    Baer, T; Bogey, T; Wenninger, J

    2010-01-01

    The Super Proton Synchrotron (SPS) at CERN with a peak energy of 450GeV is at the top of the LHC preaccelerator-complex. Apart from LHC, SPS is with Tevatron the accelerator with the largest stored beam energy, up to 2.5MJ. The SPS has a known vulnerability to fast equipment failures that led to an uncontrolled loss of a high intensity beam in 2008, which resulted in major damage of a main dipole. The beam loss was caused by a fast tune decrease towards an integer resonance. Simulations and distinct experimental studies provide clear understanding of the beam dynamics at different SPS tune resonances. Diverging closed orbit oscillations, dispersion explosion and abrupt increased beta-beating are the driving effects leading to a complete beam loss in as little as 3 turns (70us). Dedicated experiments of fast failures of the main power converters reveal that the current interlock systems are much too slow for an adequate machine protection. To counteract the vulnerability of the SPS, current research focuses on...

  16. Electrostatic septa for SPS extraction

    CERN Multimedia

    1975-01-01

    The extraction system for the N-Area is located in LSS2 (another one for the W-Area, now abandoned, was in LSS6). The electrostatic septum consists of 4 parts, each 3 m long. It is made of W-wires, 0.12 mm thick. The nominal electric field is 100 kV/cm. See also Annual Report 1975, p.175.

  17. SU-F-SPS-06: Implementation of a Back-Projection Algorithm for 2D in Vivo Dosimetry with An EPID System

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Reyes, B; Rodriguez Perez, E; Sosa Aquino, M [Universidad de Guanajuato, Leon, Guanajuato (Mexico)

    2016-06-15

    Purpose: To implement a back-projection algorithm for 2D dose reconstructions for in vivo dosimetry in radiation therapy using an Electronic Portal Imaging Device (EPID) based on amorphous silicon. Methods: An EPID system was used to calculate dose-response function, pixel sensitivity map, exponential scatter kernels and beam hardenig correction for the back-projection algorithm. All measurements were done with a 6 MV beam. A 2D dose reconstruction for an irradiated water phantom (30×30×30 cm{sup 3}) was done to verify the algorithm implementation. Gamma index evaluation between the 2D reconstructed dose and the calculated with a treatment planning system (TPS) was done. Results: A linear fit was found for the dose-response function. The pixel sensitivity map has a radial symmetry and was calculated with a profile of the pixel sensitivity variation. The parameters for the scatter kernels were determined only for a 6 MV beam. The primary dose was estimated applying the scatter kernel within EPID and scatter kernel within the patient. The beam hardening coefficient is σBH= 3.788×10{sup −4} cm{sup 2} and the effective linear attenuation coefficient is µAC= 0.06084 cm{sup −1}. The 95% of points evaluated had γ values not longer than the unity, with gamma criteria of ΔD = 3% and Δd = 3 mm, and within the 50% isodose surface. Conclusion: The use of EPID systems proved to be a fast tool for in vivo dosimetry, but the implementation is more complex that the elaborated for pre-treatment dose verification, therefore, a simplest method must be investigated. The accuracy of this method should be improved modifying the algorithm in order to compare lower isodose curves.

  18. The Food Service Worker and the Travis Air Force Base Experimental Food System: Worker Opinion and Job Satisfaction

    Science.gov (United States)

    1975-04-01

    Surveys and interviews were administered to both civilian and military food service workers at Travis Air Force Base, both before and after dining system changes, to assess job satisfaction, opinions about additional training, and opinions about environmental and equipment features relevant to potential human factors problems.

  19. Removing Known SPS Intensity Limitations for High Luminosity LHC Goals

    CERN Document Server

    Shaposhnikova, Elena; Bohl, Thomas; Cruikshank, Paul; Goddard, Brennan; Kaltenbacher, Thomas; Lasheen, Alexandre; Perez Espinos, Jaime; Repond, Joël; Salvant, Benoit; Vollinger, Christine

    2016-01-01

    In preparation of the SPS as an LHC injector its impedance was significantly reduced in 1999 - 2000. A new SPS impedance reduction campaign is planned now for the High Luminosity (HL)-LHC project, which requires bunch intensities twice as high as the nominal one. One of the known intensity limitations is a longitudinal multi-bunch instability with a threshold 3 times below this operational intensity. The instability is presently cured using the 4th harmonic RF system and controlled emittance blow-up, but reaching the HL-LHC parameters cannot be assured without improving the machine impedance. Recently the impedance sources responsible for this instability were identified and implementation of their shielding and damping is foreseen during the next long shutdown (2019 - 2020) in synergy with two other important upgrades: amorphous carbon coating of (part of) the vacuum chamber against the e-cloud effect and rearrangement of the 200 MHz RF system. In this paper the strategy of impedance reduction is presented t...

  20. Protecting worker health and safety using remote handling systems

    International Nuclear Information System (INIS)

    Dennison, D.K.; Merrill, R.D.; Reed, R.K.

    1995-03-01

    Lawrence Livermore National Laboratory (LLNL) is currently developing and installing two large-scale, remotely controlled systems for use in improving worker health and safety by minimizing exposure to hazardous and radioactive materials. The first system is a full-scale liquid feed system for use in delivering chemical reagents to LLNL's existing aqueous low-level radioactive and mixed waste treatment facility (Tank Farm). The Tank Farm facility is used to remove radioactive and toxic materials in aqueous wastes prior to discharge to the City of Livermore Water Reclamation Plant (LWRP), in accordance with established discharge limits. Installation of this new reagent feed system improves operational safety and process efficiency by eliminating the need to manually handle reagents used in the treatment processes. This was done by installing a system that can inject precisely metered amounts of various reagents into the treatment tanks and can be controlled either remotely or locally via a programmable logic controller (PLC). The second system uses a robotic manipulator to remotely handle, characterize, process, sort, and repackage hazardous wastes containing tritium. This system uses an IBM-developed gantry robot mounted within a special glove box enclosure designed to isolate tritiated wastes from system operators and minimize the potential for release of tritium to the atmosphere. Tritiated waste handling is performed remotely, using the robot in a teleoperational mode for one-of-a-kind functions and in an autonomous mode for repetitive operations. The system is compatible with an existing portable gas cleanup unit designed to capture any gas-phase tritium inadvertently released into the glove box during waste handling

  1. Environmental assessment for the Satellite Power System (SPS): studies of honey bees exposed to 2. 45 GHz continuous-wave electromagnetic energy

    Energy Technology Data Exchange (ETDEWEB)

    Gary, N E; Westerdahl, B B

    1980-12-01

    A system for small animal exposure was developed for treating honey bees, Apis mellifera L., in brood and adult stages, with 2.45 GHz continuous wave microwaves at selected power densities and exposure times. Post-treatment brood development was normal and teratological effects were not detected at exposures of 3 to 50 mw/cm/sup 2/ for 30 minutes. Post-treatment survival, longevity, orientation, navigation, and memory of adult bees were also normal after exposures of 3 to 50 mw/cm/sup 2/ for 30 minutes. Post-treatment longevity of confined bees in the laboratory was normal after exposures of 3 to 50 mw/cm/sup 2/ for 24 hours. Thermoregulation of brood nest, foraging activity, brood rearing, and social interaction were not affected by chronic exposure to 1 mw/cm/sup 2/ during 28 days. In dynamic behavioral bioassays the frequency of entry and duration of activity of unrestrained, foraging adult bees was identical in microwave-exposed (5 to 40 mw/cm/sup 2/) areas versus control areas.

  2. Exposure of ventilation system cleaning workers to harmful microbiological agents.

    Science.gov (United States)

    Gołofit-Szymczak, Małgorzata; Ławniczek-Wałczyk, Anna; Górny, Rafał L

    2013-01-01

    Regular inspection of the cleanliness of the ventilation systems, as well as their periodic cleaning and disinfection, if necessary, are the main factors of the proper maintenance of each system. Performing maintenance operations on the ventilation system, workers are exposed to risk associated with the exposure to harmful biological agents. The aim of this study was to assess the employees' exposure to bioaerosols during maintenance work on ventilation systems. Bioaerosol measurements were carried out using a button sampler. The microbial particles were collected on gelatin filters. Settled-dust samples from the inner surface of the air ducts and filter-mat samples were selected for the microbiological analysis. In the collected air, dust and filter samples the concentration of bacteria and fungi were determined. Bacteria and fungi concentrations ranged between 3.6 x 10(2)-2.2 x 10(4) CFU/m3 and 4.7 x 10(2)-4.5 x 10(3) CFU/m3 at workplaces where the operations connected with mechanical ventilation cleaning were performed and 2.2 x 10(4)-1.2 x 10(5) CFU/m2 and 9.8 x 10(1)-2.5 x 10(2) CFU/m3 at workplaces where filter exchange was performed, respectively. The qualitative analysis of microorganisms isolated from the air in all studied workplaces revealed that the most prevalent bacteria belonged to Bacillus genus. The average concentrations of bacteria and fungi in filter-mat samples were 3.3 x 10(3) CFU/cm2 and 1.4 x 10(4) CFU/cm2, respectively. In settled-dust samples, average concentrations were 591 CFU/100 cm2 and 52 CFU/100 cm2, for bacteria and fungi respectively. Workers cleaning ventilation systems are exposed to harmful biological agents classified into risk groups, 1 and 2, according to their level of the risk of infection. The research conducted in the workplace can be the basis of risk assessment related to exposure to harmful biological agents during maintenance work in ventilation.

  3. Personal values and value systems of humanities students and workers

    Directory of Open Access Journals (Sweden)

    Lucie Křeménková

    2015-01-01

    = .433.Subsequently we analyzed the preference of values depending on the student´s school results. Pearson’s ?2analyses indicated that there si no significant differences among students divided into groups according to the school results, ?2 (12 = 10.695, p = .555. Finally we analyzed the preference of values depending on the type of work. Pearson’s ?2analyses indicated that there si no significant differences among workers divided into groups according to the type of work, ?2 (12 = 12.456, p = .410. Discussion: Analysis confirmed differences in the preference of values depending on the gender and type of employment. These correspond with the results of earlier studies (cf. Rokeach, 1973; Broek & Moor, 1994; Inglehart, 1997; Hitlin & Piliavin, 2004; Schwartz & Rubel-Lifschitz, 2005, 2009; Schwartz, 2006; Hofmann-Towfigh, 2007. It appears that differences in the values ranking in relation to gender are conditioned by various social conditions, education and individual experiences. The last two research questions were focused on the preference of values depending on the study results and the type of employment. In both cases, the mentioned groups showed no significant differences. Thus, we assume that these factors do not affect the preference of specific values. Value orientation is thus more likely to be tied to a deeper personal characteristics or external determinants in socialization. The study results, as well as the choice of a particular job has probably been effected by different motivational factors than those who activate behavior in the direction of preference selected values. Conclussion: The concept of values is still an important issue in contemporary psychology. Although today's Western society is very focused on performance and the current trend tends to support other than the humanities, we believe that the analysis of the structure of values and value system of the humanities is also important because of the large number of students and staff

  4. SPS ionosphere/microwave beam interactions: Arecibo experimental studies

    International Nuclear Information System (INIS)

    Duncan, L.M.

    1980-10-01

    The purpose of this program is to determine the environmental impacts associated with the operation of the proposed SPS microwave power transmission system. It is expected that thermal effects will provide the dominant force driving the nonlinear ionosphere/microwave beam interactions. Collisional damping of radio waves, producing ohmic heating of the ionospheric plasma, depends inversely on the square of the radio wave frequency. Therefore, equivalent heating and equivalent thermal forces can be generated at lower radiated power densities by using lower radio wave frequencies. This principle is fundamental to a large part of the experimental program. An understanding of the physics of the specific interactions excited by the SPS microwave beam is also an important part of the assessment program. This program is designed to determine instability thresholds, the growth rates and spatial extent of the resultant ionospheric disturbances, and the frequency and power dependences of the interactions. How these interactions are affected by variations in the natural ionospheric conditions, how different instabilities occurring simultaneously may affect each other, and how distinct microwave beams might mutually interact are studied. Status of the program is described

  5. Characterization of the SPS 800MHz travelling wave cavities.

    CERN Document Server

    Bazyl, Dmitry

    2015-01-01

    It is well known that HOMs in RF cavities are a potentially dangerous source of beam impedance. Therefore, HOMs (both longitudinal and transverse) can drive the beam unstable . The 800MHz cavities of the SPS were studied in the past. However, very little documentation was left behind. Currently, the performance of the SPS is limited by a longitudinal beam instability. In order to study this instability, an accurate impedance model of the whole SPS is needed.

  6. Satellite Power System (SPS) centralization/decentralization

    Science.gov (United States)

    Naisbitt, J.

    1978-01-01

    The decentralization of government in the United States of America is described and its effect on the solution of energy problems is given. The human response to the introduction of new technologies is considered as well as the behavioral aspects of multiple options.

  7. Coupling Impedance of the CERN SPS beam position monitors

    CERN Document Server

    Salvant, B; Boccard, C; Caspers, Friedhelm; Grudiev, A; Jones, R; Métral, E; Rumolo, G; Zannini, C; Spataro, B; Alesini, D; Migliorati, M; Roncarolo, F; Calaga, R

    2010-01-01

    A detailed knowledge of the beam coupling impedance of the CERN Super Proton Synchrotron (SPS) is required in order to operate this machine with a higher intensity for the foreseen Large Hadron Collider (LHC) luminosity upgrade. A large number of Beam Position Monitors (BPMs) is currently installed in the SPS, and this is why their contribution to the SPS impedance has to be assessed. This paper focuses on electromagnetic (EM) simulations and bench measurements of the longitudinal and transverse impedance generated by the horizontal and vertical BPMs installed in the SPS machine.

  8. System Thinking Scales and Learning Environment of Family Planning Field Workers in East Java, Indonesia

    Science.gov (United States)

    Listyawardani, Dwi; Hariastuti, Iswari

    2016-01-01

    Systems thinking is needed due to the growing complexity of the problems faced family planning field workers in the external environment that is constantly changing. System thinking ability could not be separated from efforts to develop learning for the workers, both learning at the individual, group, or organization level. The design of the study…

  9. 75 FR 76487 - Haldex Brake Corporation, Commercial Vehicle Systems, Including On-Site Leased Workers of...

    Science.gov (United States)

    2010-12-08

    ..., Commercial Vehicle Systems, Including On-Site Leased Workers of Johnston Integration Technologies, a... Adjustment Assistance In accordance with Section 223 of the Trade Act of 1974, as amended (``Act''), 19 U.S.C... system components. The company reports that workers leased from Johnston Integration Technologies, a...

  10. Na61/Shine at the CERN SPS

    CERN Document Server

    Laszlo, Andras; Aduszkiewicz, A; Andrieu, B; Anticic, T; Antoniou, N; Asryan, A G; Baatar, B; Blondel, A; Blumer, J; Boldizsar, L; Bravar, A; Brzychczyk, J; Bunyatov, S A; Cafagna, F; Catanesi, M G; Choi, K U; Christakoglou, P; Chung, P; Cleymans, J; Derkach, D A; Diakonos, F; Dominik, Wojciech; Dumarchez, J; Engel, R; Ereditato, A; Feofilov, G A; Fodor, Z; Gazdzicki, M; Golubeva, M; Grebieszkow, K; Guber, F; Haungs, A; Hess, M; Igolkin, S; Ivanov, A S; Ivashkin, A; Kadija, K; Karabowicz, R; Katrynska, N; Kielczewska, D; Kikola, D; Kim, J H; Kobayashi, T; Kolesnikov, V I; Kolev, D; Kolevatov, R S; Kondratiev, V P; Kurepin, A; Lacey, R; Lehmann, S; Lungwitz, B; Lyubushkin, V V; Maevskaya, A; Majka, Z; Malakhov, A I; Marchionni, A; Di Marco, M; Matveev, V; Melkumov, G L; Meregaglia, A; Messina, M; Meurer, C; Mijakowski, P; Mitrovski, M; Montaruli, T; Mrówczynski, S; Murphy, S; Nakadaira, T; Naumenko, P A; Nikolic, V; Palczewski, T; Pálla, G; Panagiotou, A D; Peryt, W; Petridis, A; Planeta, R; Pluta, J; Popov, B A; Posiadala, M; Przewlocki, P; Radicioni, E; Rauch, W; Renfordt, R; Röhrich, D; Rondio, E; Rossi, B; Roth, M; Rubbia, André; Rybczynski, M; Sadovskii, A; Sakashita, K; Schuster, T; Sekiguchi, T; Seyboth, P; Shileev, K; Sissakian, A N; Skrzypczak, E; Slodkowski, M; Sorin, A S; Staszel, P; Stefanek, G; Stepaniak, J; Strabel, C; Ströbele, H; Susa, T; Szentpétery, I; Szuba, M; Taranenko, A; Tsenov, R; Unger, M; Vassiliou, M; Vechernin, V V; Vesztergombi, G; Wlodarczyk, Z; Wojtaszek, A; Yi, J G; Yoo, I K

    2007-01-01

    Status of the new experimental program to study hadron production in hadron-nucleus and nucleus-nucleus collisions at the CERN SPS will be presented. In particular, a detailed physics motivation and experimental strategy will be given for the part of the program related to the physics of strongly interacting matter: search for the critical point of strongly interacting matter, study properties of the onset of deconfinement, and high p_T measurements in p+p and p+A interactions. The planned measurements for the neutrino T2K and cosmic-ray experiments will also be discussed.

  11. Thermal Studies on the SPS Wideband Transverse Feedback Kicker

    CERN Document Server

    Roggen, Toon; Hofle, Wolfgang; Montesinos, Eric; CERN. Geneva. ATS Department

    2016-01-01

    As part of the SPS wideband transverse feedback system in the framework of the LHC Injector Upgrade (LIU) project, a wideband kicker design is being proposed. Vertical beam instabilities due to intensity dependent effects (electron cloud instability (ECI) and transverse mode coupling instability (TMCI)) are potentially suppressed by using a feedback system driving such a kicker system. One of the options for a kicker is a one meter long slotted-coaxial kicker, providing a substantial vertical kick strength (10ˉ5 –10ˉ4 eV.s/m) over a bandwidth ranging from nearly DC to 1 GHz. The necessary kick strength requires a total power of 4 kW. This note describes thermal studies that assisted in the material choice of the feedthroughs of the slotted-coaxial kicker and guided the design choices.

  12. Risks of circulatory diseases among Mayak PA workers with radiation doses estimated using the improved Mayak Worker Dosimetry System 2008

    Energy Technology Data Exchange (ETDEWEB)

    Moseeva, Maria B.; Azizova, Tamara V.; Grigoryeva, Evgenia S. [Southern Urals Biophysics Institute (SUBI), Ozyorsk, Chelyabinsk Region (Russian Federation); Haylock, Richard [Public Health of England, London (United Kingdom)

    2014-05-15

    The new Mayak Worker Dosimetry System 2008 (MWDS-2008) was published in 2013 and supersedes the Doses-2005 dosimetry system for Mayak Production Association (PA) workers. It provides revised external and internal dose estimates based on the updated occupational history data. Using MWDS-2008, a cohort of 18,856 workers first employed at one of the main Mayak PA plants during 1948-1972 and followed up to 2005 was identified. Incidence and mortality risks from ischemic heart disease (IHD) (International Classification of Diseases (ICD)-9 codes 410-414) and from cerebrovascular diseases (CVD) (ICD-9 codes 430-438) were examined in this cohort and compared with previously published risk estimates in the same cohort based on the Doses-2005 dosimetry system. Significant associations were observed between doses from external gamma-rays and IHD and CVD incidence and also between internal doses from alpha-radiation and IHD mortality and CVD incidence. The estimates of excess relative risk (ERR)/Gy were consistent with those estimates from the previous studies based on Doses-2005 system apart from the relationship between CVD incidence and internal liver dose where the ERR/Gy based on MWDS-2008 was just over three times higher than the corresponding estimate based on Doses-2005 system. Adjustment for smoking status did not show any effect on the estimates of risk from internal alpha-particle exposure. (orig.)

  13. A GIF++ Gamma Irradiation Facility at the SPS H4 Beam Line

    CERN Document Server

    Capéans-Garrido, M; Linssen, L; Moll, M; Rembser, C

    2009-01-01

    The current document describes a proposal to implement a new gamma irradiation facility, combined with a high-energy particle beam in the SPS H4 beam line in hall EHN1. This new GIF++ facility is motivated by strong needs from the LHC and sLHC detector and accelerator communities for the tests of LHC components and systems.

  14. High statistics inclusive phi-meson production at SPS energies

    International Nuclear Information System (INIS)

    Dijkstra, H.B.

    1985-01-01

    This thesis describes an experiment studying the inclusive reaction hadron + Be → phi + anything → K + + K - + anything in 100 GeV/c, 120 GeV/c and 200 GeV/c hadron interactions. A total of 8x10 6 events were recorded using both positively and negatively charged unseparated hadron beams supplied by the CERN SPS. The experiment made use of an intelligent on-line event selection system based on micro-processors (FAMPs) in conjunction with a system of large MWPCs to increase the number of phi-events recorded per unit time. In 32 days of data taking over 600,000 phi-mesons were recorded onto magnetic tape. The physics motivation for collecting a large statistics sample of inclusive phi-mesons was the investigation of the inclusive phi-meson production mechanism and phi-spectroscopy. (Auth.)

  15. Experience with workstations for accelerator control at the CERN SPS

    International Nuclear Information System (INIS)

    Ogle, A.; Ulander, J.; Wilkie, I.

    1990-01-01

    The CERN super proton synchrotron (SPS) control system is currently undergoing a major long-term upgrade. This paper reviews progress on the high-level application software with particular reference to the operator interface. An important feature of the control-system upgrade is the move from consoles with a number of fixed screens and limited multitasking ability to workstations with the potential to display a large number of windows and perform a number of independent tasks simultaneously. This workstation environment thus permits the operator to run tasks in one machine for which he previously had to monopolize two or even three old consoles. However, the environment also allows the operator to cover the screen with a multitude of windows, leading to complete confusion. Initial requests to present some form of 'global status' of the console proved to be naive, and several iterations were necessary before the operators were satisfied. (orig.)

  16. Performance/design criteria review advanced worker protection systems. Topical report

    International Nuclear Information System (INIS)

    1996-08-01

    The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D ampersand D) obligations at its numerous sites. Several technologies are being investigated which can potentially reduce D ampersand D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D ampersand D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This document describes an Advanced Worker Protection System (AWPS). The AWPS is built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with a variety of articles of protective clothing and support equipment

  17. Performance/design criteria review advanced worker protection systems. Topical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The Department of Energy (DOE) is in the process of defining the magnitude and diversity of Decontamination and Decommissioning (D&D) obligations at its numerous sites. Several technologies are being investigated which can potentially reduce D&D costs while providing appropriate protection to DOE workers. The DOE recognizes that traditional methods used by the EPA in hazardous waste site clean up activities are insufficient to provide the needed protection and worker productivity demanded by DOE D&D programs. As a consequence, new clothing and equipment which can adequately protect workers while providing increases in worker productivity are being sought for implementation at DOE sites. This document describes an Advanced Worker Protection System (AWPS). The AWPS is built around a life support backpack that uses liquid air to provide cooling as well as breathing gas to the worker. The backpack will be combined with a variety of articles of protective clothing and support equipment.

  18. Study of national registration systems for health records of radiation workers. National radiation dose registration system

    International Nuclear Information System (INIS)

    Nakagawa, Haruo; Kanda, Keiji

    1999-01-01

    A national radiation dose registration system is proposed in this paper. In Japan, only one radiation dose registration system is partly effective. It is applied for workers in nuclear power plants which are under control of regulatory laws for nuclear reactors. The total system was proposed previously by the Committee for Compensation Claims of Nuclear Accidents. The reason for the delay in establishing a registration system for all radiation workers is supposedly a lack of effort to adjust differences among items in radiation protection laws and the promotion of public acceptance to atomic power. Items about dose recordings, record keeping and dose-record reporting in all of the radiation regulatory laws are compared to each other, and items were extracted for revision. (author)

  19. A 25th Anniversary Rejuvenation for the SPS

    CERN Multimedia

    2001-01-01

    The SPS has just turned 25, and to mark the occasion it has been treated to a facelift like none before. After serving as injector for LEP, the SPS is being prepared to pre-accelerate proton beams for the LHC.

  20. Performance of community health workers : situating their intermediary position within complex adaptive health systems

    NARCIS (Netherlands)

    Kok, Maryse C; Broerse, Jacqueline E W; Theobald, Sally; Ormel, Hermen; Dieleman, Marjolein; Taegtmeyer, Miriam

    2017-01-01

    Health systems are social institutions, in which health worker performance is shaped by transactional processes between different actors.This analytical assessment unravels the complex web of factors that influence the performance of community health workers (CHWs) in low- and middle-income

  1. Analysis of Autonomic Nervous System Functional Age and Heart Rate Variability in Mine Workers

    Directory of Open Access Journals (Sweden)

    Vasicko T

    2016-04-01

    Full Text Available Introduction: Heavy working conditions and many unpropitious factors influencing workers health participate in development of various health disorders, among other autonomic cardiovascular regulation malfunction. The aim of this study is to draw a comparison of autonomic nervous system functional age and heart rate variability changes between workers with and without mining occupational exposure.

  2. Arrival of the Robbins machine in LSS1 after completing the boring of the SPS tunnel.

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    A few months after the signature of the agreement giving the go-ahead for the expansion of CERN into French territory (see Bulletin no.24/2004), work began on the Super Proton Synchrotron (SPS). Two years later, on 31 July 1974, the Robbins tunnel-boring machine excavating the SPS tunnel returned to its starting point (see photograph). It had excavated a tunnel with a circumference of 7 kilometres, at an average depth of 40 metres below the surface. The tunnel straddled the Franco-Swiss border, making the SPS the first cross-border accelerator. More than a thousand magnets were needed to equip the ring. The civil engineering and installation work was completed in record time after only four years. The SPS was equipped with a control system which was ahead of its time, consisting of 24 small control computers distributed in the tunnel and the control room and communicating by means of a high-rate data transmission system. The main control room housed only four consoles as opposed to the banks of electronic eq...

  3. Stiff person syndrome (SPS: Literature review and case report

    Directory of Open Access Journals (Sweden)

    Erna Pretorius

    2013-11-01

    Full Text Available Stiff person syndrome (SPS is a rare, debilitating condition which presents with progressive and inconsistent neurological features. The main symptoms are stiffness and intermittent, painful muscle spasms, triggered and exacerbated by stressful and emotional stimuli. The fluctuating clinical nature of SPS, and otherwise normal neurological examination, often lead to a misdiagnosis of conversion disorder. Psychiatric symptoms frequently accompany this disorder and patients are often first seen by psychiatrists. SPS is autoimmune-based: antibodies are directed against glutamate decarboxylase, resulting in dysregulation of gamma-aminobutyric acid (GABA in the brain which is considered the cause of the neuropsychiatric symptomatology. SPS should be considered in the differential diagnosis of conversion disorder. Effective management requires early detection, a collaborative approach with GABA-ergic medication and intravenous immunoglobulins, and management of concomitant psychiatric disorders. We describe a patient with SPS. Only one other case has been reported in South Africa.

  4. Fragmentation of Pb-Projectiles at SPS Energies

    CERN Multimedia

    2002-01-01

    % EMU17 \\\\ \\\\ We have exposed stacks consisting of solid state nuclear track detectors (CR-39 plastic and BP-1 glass) and different target materials at the SPS to beams of Pb projectiles. Our detectors record tracks of relativistic nuclei with charge numbers of Z~$\\geq$~6 for CR-39 and Z~$\\geq$75 for BP-1. After development of the tracks by etching they are detected and measured using completely automated microscope systems. Thus experiments with high statistics are possible. \\\\ \\\\BP-1 detectors were exposed to measure total charge changing cross sections and elemental production cross sections for heavy projectile fragments. These experiments were performed for different targets CH$ _{2} $, C, Al, Cu, Ag and Pb. Comparison of the results for different targets allows to investigate contributions to charge changing reactions by electromagnetic dissociation. Multifragmentation events in which several intermediate mass fragments are emitted from the heavy Pb projectile are studied using stacks containing CR-39 d...

  5. The New SPS Extraction Channel for LHC and CNGS

    CERN Document Server

    Goddard, B; Schröder, G; Weterings, W; Uythoven, J

    2000-01-01

    The Large Hadron Collider (LHC) and CERN Neutrino to Gran Sasso (CNGS) projects require the construction of a new fast-extraction system in the long straight section LSS4 of the Super Proton Synchrotron (SPS) at CERN. A conventional DC septum magnet will be used, in conjunction with the installation of horizontal and vertical extraction bumpers, main quadrupoles with enlarged apertures, extraction kicker magnets and additional hardware protection, instrumentation, controls and electronics. The extraction channel must be able to accept the bright LHC proton beam at 450 GeV/c, and also the high intensity, large emittance fixed target CNGS proton beam at the nominal 400 GeV/c extraction momentum. This paper describes the extraction channel to be installed in 2003, and shows how the requirements for both the LHC and CNGS project can be met.

  6. Stopping, heating, thermalization and expansion at SPS energies

    CERN Document Server

    Gaardhoje, J J

    1997-01-01

    The Pb beam at 158AGeV from the CERN SPS accelerator which was taken into use in the fall of 1994 has opened a new dimension in the study of highly excited nuclear matter in heavy ion reactions. It has now become possible to form reasonably large volumes (containing more than 300 nucleons) in central collisions between heavy ions, with energy and matter densities in some parts of the volume exceeding those expected for the phase transition from hadronic matter to deconfined quark and gluon matter. In this talk we discuss some features of the expansion of the hot and compressed system that may be learned by analysing the single particle spectra of baryons and mesons with emphasis on data from the NA44 experiment.

  7. Modifications to the SPS LSS6 Septa for LHC and the SPS Septa Diluters

    CERN Document Server

    Borburgh, Y; Goddard, B; Kadi, Y

    2006-01-01

    The Large Hadron Collider required the modification of the existing extraction channel in the long straight section (LSS) 6 of the CERN Super Proton Synchrotron (SPS), including the suppression of the electrostatic wire septa. The newly set up fast extraction will be used to transfer protons at 450 GeV/c as well as ions via the 2.9 km long transfer line TI 2 to Ring 1 of the LHC. The girder of the existing SPS DC septa was modified to accommodate a new septum protection element. Changes were also applied to the septum diluter in the fast extraction channel in LSS4, leading to the other LHC ring and the CNGS facility. The requirements and the layout of the new LSS6 extraction channel will be described including a discussion of the design and performance of the installed septum diluters.

  8. NA62 experiment at CERN SPS

    Directory of Open Access Journals (Sweden)

    Kozhuharov Venelin

    2014-01-01

    Full Text Available The NA62 experiment at SPS is a continuation of the long standing CERN kaon physics program. The high statistics and the unprecedent precision allow to probe the Standard Model and test the description of the strong interactions at low energy. The final results on the the lepton universality test by measuring the ratio RK = Γ(K+ → e+ν/Γ(K+ → µ+ν and the study of the K± → π±γγ decay are presented. The major goal of the NA62 experiment is to perform a measurement of the Br(K+ → π+νν̄ with a precision of 10% in two years of data taking. The detector setup together with the analysis technique is described.

  9. Food and nutrient intake among workers with different shift systems.

    Science.gov (United States)

    Hemiö, Katri; Puttonen, Sampsa; Viitasalo, Katriina; Härmä, Mikko; Peltonen, Markku; Lindström, Jaana

    2015-07-01

    Over 20% of employees in Europe work in shifts. Shift work increases the risk for chronic diseases, but a healthy lifestyle may attenuate the adverse effect of shift work. The aim of this study was to explore food and nutrient intake differences between working time groups. The participants were 1478 employees (55% of men) of an airline divided into three working time groups: day work (n=608), shift work without in-flight work (n=541) and in-flight work (n=329). Measures included laboratory tests, physical measurements, a questionnaire, and food and nutrient intake estimations by a validated 16-item food intake questionnaire. Shift working men were less likely to consume vegetables (p<0.001) and fruits (p=0.049) daily than male day and in-flight workers. In women, energy intake from saturated fat was higher among shift workers compared with day workers (12.6 vs 12.2 E%, p=0.023). In older female participants, energy intake from fat and saturated fat was higher in the shift work and in-flight work groups than in the day work group (p<0.001). In this study, shift work and working environment were associated with dietary habits, and this association was not explained by other characteristics such as workers' educational level. Shift workers' increased risk for chronic diseases should be taken into account and lifestyle counselling including advice in nutrition should be incorporated in routine occupational healthcare of shift workers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  10. A job analysis of selected health workers in a district health system in KwaZulu Natal - Part three: Other categories of health workers

    Directory of Open Access Journals (Sweden)

    B Groenewald

    2003-09-01

    Full Text Available This article described the third part of a study aimed at doing a job analysis of nurses and non-professional health workers in a district health system. This article describes the tasks of five categories of workers, their training and their work-load over an ordinary week.

  11. Performance of community health workers:situating their intermediary position within complex adaptive health systems

    OpenAIRE

    Kok, Maryse. C; Broerse, Jacqueline E.W; Theobald, Sally; Ormel, Hermen; Dieleman, Marjolein; Taegtmeyer, Miriam

    2017-01-01

    Health systems are social institutions, in which health worker performance is shaped by transactional processes between different actors. This analytical assessment unravels the complex web of factors that influence the performance of community health workers (CHWs) in low- and middle-income countries. It examines their unique intermediary position between the communities they serve and actors in the health sector, and the complexity of the health systems in which they operate. The assessment...

  12. Searching for Quark Matter at the CERN SPS

    CERN Document Server

    Lourenço, C

    2002-01-01

    This article gives a brief overview of some recent advances in our understanding of the physics of dense strongly interacting matter, from measurements done at the CERN SPS. The presently available results are very interesting, and are likely to reflect the production of a new state of matter in central Pb-Pb collisions, at the highest SPS energies. However, important questions require further work. Particular emphasis is given to developments made since the Quark Matter 1999 conference, and to issues that justify the continuation of the SPS heavy ion physics program beyond year 2000.

  13. The potency of the SPS Agreement’s ‘excessivity test’

    NARCIS (Netherlands)

    Schebesta, H.; Sinopoli, D.A.

    2018-01-01

    The article investigates the current and potential relevance of Article 5.6 SPS in deciding SPS disputes, and its impact on trade liberalization and WTO Members’ power to take sanitary and phytosanitary measures.
    Article 5.6 of the SPS Agreement states that SPS measures may not be more trade

  14. Monitoring the extracted proton beam at the SPS

    CERN Multimedia

    CERN PhotoLab

    1977-01-01

    Fluorescent screens in front of the target positions allow a precise adjustement in front of them. A similar photo was recorded at the beam dump at the beam injection into the SPS, see Weekly Bulletin of April 1976.

  15. Measurement of Electron Cloud Effects in SPS

    CERN Document Server

    Jiménez, J M

    2004-01-01

    The electron cloud is not a new phenomenon, indeed, it was observed already in other machines like the proton storage rings in BINP Novosibirsk or in the Intersecting Storage Ring (ISR) at CERN. Inside an accelerator beam pipe, the electrons can collectively and coherently interact with the beam potential and degrade the performance of the accelerators operating with intense positively charged bunched beams. In the LHC, electron multipacting is expected to take place in the cold and warm beam pipe due to the presence of the high intensities bunched beams, creating an electron cloud. The additional heat load induced by the electron cloud onto the LHC beam screens of the cold magnets of the LHC bending sections (the arcs represent ~21 km in length) was, and is still, considered as one of the main possible limitation of LHC performances. Since 1997 and in parallel with the SPS studies with LHC-type beams, measurements in other machines or in the laboratory have been made to provide the input parameters required ...

  16. SPS Dipole Multipactor Test and TEWave Diagnostics

    CERN Document Server

    Caspers, F; Edwards, P; Federmann, S; Holz, M; Taborelli, M

    2013-01-01

    Electron cloud accumulation in particle accelerators can be mitigated by coating the vacuum beam pipe with thin films of low secondary electron yield (SEY) material. The SEY of small coated samples are usually measured in the laboratory. To further test the properties of different coating materials, RF-induced multipacting in a coaxial waveguide configuration can be performed. The technique is applied to two main bending dipoles of the SPS, where the RF power is fed through a tungsten wire stretched along the vacuum chamber (6.4 m). A dipole with a bare stainless steel chamber shows a clear power threshold initiating an abrupt rise in reflected power and pressure. The effect is enhanced at RF frequencies corresponding to electron cyclotron resonances for given magnetic fields. Preliminary results show that the dipole with a carbon coated vacuum chamber does not exhibit any pressure rise or reflected RF power up to the maximum available input power. In the case of a large scale coating production this techniqu...

  17. Physics at the AD/PS/SPS (1/4)

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Lecture 1: The CERN injector complex and beams for non-LHC physics. The various machines and beam lines in the CERN injector complex are presented, from the linacs to the SPS. Special emphasis is given to the beam lines at the PS and SPS machines: AD, North and East Areas, nTOF and CNGS and HiRadMad as well as the ion beams. A short outlook is given to possible future upgrades and projects.

  18. Transverse mode coupling instability for leptons in the CERN SPS

    Energy Technology Data Exchange (ETDEWEB)

    Linnecar, T; Shaposhnikova, E N [European Organization for Nuclear Research, Geneva (Switzerland)

    1996-08-01

    The intensity of leptons accelerated in the SPS machine is limited by a vertical transverse instability. The results of measurements of the thresholds for this transverse instability are compared with theoretical predictions for different broad band impedance models of the SPS. The threshold intensities found for the transverse instability and the position of the losses in the cycle enable the parameters of the broadband resonant impedance to be specified. (author)

  19. Prototype of cavity for lepton acceleration in the SPS

    CERN Multimedia

    CERN PhotoLab

    1982-01-01

    The SPS was to be the injector for LEP and had to accelerate the electrons and positrons delivered by the PS. This is a prototype of a 200 MHz, single-cell, standing-wave, cavity for lepton acceleration in the SPS. On top of the cavity, at the back, is the tetrode amplifier, the tuning mechanism is leaning towards the viewer. See also 8103523 and Annual Report 1981, p.114.

  20. The SPS was the second cross-border accelerator

    CERN Multimedia

    2004-01-01

    In the Golden Jubilee article in the issue 25/2004 (14 June) we should have written that the SPS was the first big cross-border accelerator. In fact, the SPS was not the first cross-border accelerator: that title goes to the PS Booster which became operational in 1972. The PS Booster passes beams to the PS and to the ISOLDE facility. We are sorry for the mistake and thank our vigilant readers.

  1. Studies on the QCD Phase Diagram at SPS and FAIR

    International Nuclear Information System (INIS)

    Blume, Christoph

    2013-01-01

    A review of results of the energy scan program at the CERN-SPS by the NA49 experiment is given. Presented are observables related to the search for a critical point in the QCD phase diagram and for the onset of deconfinement. Furthermore, the ongoing experimental program of NA61 at the CRRN-SPS and the plans of the CBM experiment at FAIR are discussed.

  2. Search for the QCD critical point at SPS energies

    CERN Document Server

    Anticic, T.; Barna, D.; Bartke, J.; Betev, L.; Bialkowska, H.; Blume, C.; Boimska, B.; Botje, M.; Bracinik, J.; Buncic, P.; Cerny, V.; Christakoglou, P.; Chung, P.; Chvala, O.; Cramer, J.G.; Csato, P.; Dinkelaker, P.; Eckardt, V.; Fodor, Z.; Foka, P.; Friese, V.; Gal, J.; Gazdzicki, M.; Genchev, V.; Gladysz, E.; Grebieszkow, K.; Hegyi, S.; Hohne, C.; Kadija, K.; Karev, A.; Kikola, D.; Kolesnikov, V.I.; Kornas, E.; Korus, R.; Kowalski, M.; Kreps, M.; Laszlo, A.; Lacey, R.; van Leeuwen, M.; Levai, P.; Litov, L.; Lungwitz, B.; Makariev, M.; Malakhov, A.I.; Mateev, M.; Melkumov, G.L.; Mischke, A.; Mitrovski, M.; Mrowczynski, St.; Palla, G.; Panagiotou, A.D.; Petridis, A.; Peryt, W.; Pikna, M.; Pluta, J.; Prindle, D.; Puhlhofer, F.; Renfordt, R.; Roland, C.; Roland, G.; Rybczynski, M.; Rybicki, A.; Sandoval, A.; Schmitz, N.; Schuster, T.; Seyboth, P.; Sikler, F.; Sitar, B.; Skrzypczak, E.; Slodkowski, M.; Stefanek, G.; Stock, R.; Strabel, C.; Strobele, H.; Susa, T.; Szentpetery, I.; Sziklai, J.; Szuba, M.; Szymanski, P.; Trubnikov, V.; Utvic, M.; Varga, D.; Vassiliou, M.; Veres, G.I.; Vesztergombi, G.; Vranic, D.; Wlodarczyk, Z.; Wojtaszek-Szwarc, A.; Yoo, I.K.; Abgrall, N.; Aduszkiewicz, A.; Andrieu, B.; Anticic, T.; Antoniou, N.; Argyriades, J.; Asryan, A.G.; Blondel, A.; Blumer, J.; Boldizsar, L.; Bravar, A.; Brzychczyk, J.; Bubak, A.; Bunyatov, S.A.; Choi, K.-U.; Chung, P.; Cleymans, J.; Derkach, D.A.; Diakonos, F.; Dominik, W.; Dumarchez, J.; Engel, R.; Ereditato, A.; Feofilov, G.A.; Ferrero, A.; Gazdzicki, M.; Golubeva, M.; Grzeszczuk, A.; Guber, F.; Hasegawa, T.; Haungs, A.; Igolkin, S.; Ivanov, A.S.; Ivashkin, A.; Katrynska, N.; Kielczewska, D.; Kisiel, J.; Kobayashi, T.; Kolev, D.; Kolevatov, R.S.; Kondratiev, V.P.; Kowalski, S.; Kurepin, A.; Lacey, R.; Lyubushkin, V.V.; Majka, Z.; Marchionni, A.; Marcinek, A.; Maris, I.; Matveev, V.; Meregaglia, A.; Messina, M.; Mijakowski, P.; Montaruli, T.; Murphy, S.; Nakadaira, T.; Naumenko, P.A.; Nikolic, V.; Nishikawa, K.; Palczewski, T.; Planeta, R.; Popov, B.A.; Posiadala, M.; Przewlocki, P.; Rauch, W.; Ravonel, M.; Rohrich, D.; Rondio, E.; Rossi, B.; Roth, M.; Rubbia, A.; Sadovsky, A.; Sakashita, K.; Sekiguchi, T.; Seyboth, P.; Shibata, M.; Sissakian, A.N.; Sorin, A.S.; Staszel, P.; Stepaniak, J.; Strabel, C.; Stroebele, H.; Tada, M.; Taranenko, A.; Tsenov, R.; Ulrich, R.; Unger, M.; Vechernin, V.V.; Zipper, W.

    2009-01-01

    Lattice QCD calculations locate the QCD critical point at energies accessible at the CERN Super Proton Synchrotron (SPS). We present average transverse momentum and multiplicity fluctuations, as well as baryon and anti-baryon transverse mass spectra which are expected to be sensitive to effects of the critical point. The future CP search strategy of the NA61/SHINE experiment at the SPS is also discussed.

  3. Life after discovery: a look at the SPS of 2012

    CERN Multimedia

    Katarina Anthony

    2012-01-01

    Though no longer the newest kid on the block, the SPS remains as essential to CERN’s research programme as it was when it discovered the W and Z bosons back in 1983. The CERN Bulletin takes a look at how the SPS has kept up with younger CERN accelerators...   Teams changing an SPS magnet during a technical stop. Image courtesy of Franck Bais. It’s the 1970s and the Super Proton Synchrotron (SPS) is at the top of the charts. It’s accelerating protons at 400 GeV - an unprecedented energy for CERN - and its discoveries will make it the first (and, so far, the only) CERN accelerator to generate a Nobel Prize. Fast-forward to 2012 and the SPS is running at 450 GeV – well beyond its original design parameters – and is an essential part of the LHC accelerator complex. Not bad for a machine heading into its 40s. While much of the SPS dates back to the original set-up, it has been in constant evolution over the years. Except for a long shutdo...

  4. An FPGA Based Multiprocessing CPU for Beam Synchronous Timing in CERN's SPS and LHC

    CERN Document Server

    Ballester, F J; Gras, J J; Lewis, J; Savioz, J J; Serrano, J

    2003-01-01

    The Beam Synchronous Timing system (BST) will be used around the LHC and its injector, the SPS, to broadcast timing meassages and synchronize actions with the beam in different receivers. To achieve beam synchronization, the BST Master card encodes messages using the bunch clock, with a nominal value of 40.079 MHz for the LHC. These messages are produced by a set of tasks every revolution period, which is every 89 us for the LHC and every 23 us for the SPS, therefore imposing a hard real-time constraint on the system. To achieve determinism, the BST Master uses a dedicated CPU inside its main Field Programmable Gate Array (FPGA) featuring zero-delay hardware task switching and a reduced instruction set. This paper describes the BST Master card, stressing the main FPGA design, as well as the associated software, including the LynxOS driver and the tailor-made assembler.

  5. MANAGEMENT SYSTEM OF KNOWLEDGE WORKERS IN THE CONTEMPORARY ENTERPRISE

    Directory of Open Access Journals (Sweden)

    Michał Igielski

    2016-12-01

    Full Text Available Changes in the twenty-first century are faster and appear unexpectedly. They are not always necessary for the smooth functioning of the company. This is the domain of globalization, where new events - opportunities or threats are challenging the viability against which the questions are now all companies. More and more depends on the intangible assets of the undertaking, its strategic potential. Therefore Przedsiębiorsto creates and develops skills which then turns on competence. It is ond become the basis for competitiveness. The main determinant in this process is not only optimal, but the skillful management of intellectual capital. Its importance in recent years is constantly increasing, and the success of the market determines the joint commitment of all organizational units. Certain types of work require to the larger amount of knowledge, experience and independent thinking, and custom than others. For all employers, it is important to recognize these differences and create a new management principles ketegorią professionals who have knowledge useful for the enterprise - are knowledge workers. Therefore, the purpose of this article is an attempt to show management knowledge workers in modern companies, based on tests carried out in the years 2013 - 2015, in 100 large companies operating in the Baltic Sea Region

  6. The health care system for female workers and its current status in Japan.

    Science.gov (United States)

    Nohara, M; Kagawa, J

    2000-11-01

    In this paper we describe female workers' health care, the women's and maternal protection system within the Japanese legal system, the current status of female workers in Japan, and problems regarding methods of advancing health care and the women's or maternal protection system. Motherhood is respected in the workplace in Japan, and in order to provide an environment in which women can work and still bear and rear children with a sense of security, laws concerning maternal protection of female workers, and revisions in terms of the system have been made, and a new system has been in effect since the fiscal year of 1998. Nevertheless, gender discrimination against women and the disparagement of women, rooted in gender role stereotypes concerning the division of labor, remain firmly planted in the social environment and in long-established custom.

  7. Evolution of the SPS Power Converter Controls towards the LHC Era

    CERN Document Server

    Brazier, J.C.L.; Semanaz, P.

    2001-01-01

    By the end of the nineties, the power converter control system (Mugef) of the CERN proton accelerator (SPS) had undergone a complete modernization. This resulted in newly developed hardware for function generation, measurement and I/O in a VME environment, under the LynxOS real-time operating system. This has provided a platform on which extensions can be developed for future operation in the Large Hadron Collider (LHC) era. This paper describes some of these extensions, in particular a fast Surveillance and Interlock system for monitoring the power converter output currents. This will be mandatory for the safe operation of the SPS transfer lines TI2 & TI8 to LHC and for similar applications in the future. The strategies employed to cope with various failure modes of the power converters and the timely activation of the interlock are outlined. The new SPS controls infrastructure now under development, will give rise to new modes of operation for the Mugef systems. Integration with the proposed middleware ...

  8. The Assessment of I-131 Internal Doses of Nuclear Medicine Workers in Korea Using Thyroid uptake system

    International Nuclear Information System (INIS)

    Bahn, Young Kag; Oh, Gi Back; Lee, Chang Ho; Lee, Jong Doo; Yeom, Yu Sun; Hwang, Young Muk

    2012-01-01

    There are possibilities the radiation workers could intake the radiation when workers deal with radiation-materials. Therefore, internal radiation doses of radiation workers need to be assessed. Although an application of the nuclear medicine is continuously increased in Korea, there is not a proper tool and form to monitor the internal doses of nuclear medicine workers. However, it is possible to attain the internal doses of I-131 to evaluate using thyroid uptake and well count system. In this study, we measured and evaluated the I-131 internal doses of nuclear medicine workers in Korea using thyroid uptake and well count system and performed an air sampling

  9. ORBIT FEEDBACK CONTROL FOR THE LHC Prototyping at the SPS

    CERN Document Server

    Steinhagen, Ralph J

    2004-01-01

    The Large Hadron Collider (LHC) is the next generation proton collider that is presently built at CERN. The LHC will be installed in the former LEP (Large Electron Positron Collider) tunnel. The presence of a high intensity beam in an environment of cryogenic magnets requires an excellent control of particle losses from the beam. Eventually the performance of the LHC may be limited by the ability to control the beam losses. The performance of the LHC cleaning system depends critically on the beam position stability. Ground motion, field and alignment imperfections and beam manipulations may cause orbit movements. The role of the future LHC Orbit Feedback System is the minimisation of closed orbit perturbations by periodically measuring and steering the transverse beam position back to its reference position. This diploma thesis focuses on the design and prototyping of an orbit feedback system at the SPS. The design is based on a separation of the steering problem into space and time. While the correction in s...

  10. Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era

    CERN Document Server

    Kain, Verena; Fraser, Matthew; Goddard, Brennan; Meddahi, Malika; Perillo Marcone, Antonio; Steele, Genevieve; Velotti, Francesco

    2016-01-01

    Each of the 3 km long transfer lines between the SPS and the LHC is equipped with two beam stoppers (TEDs), one at the beginning of the line and one close to the LHC injection point, which need to absorb the full transferred beam. The beam stoppers are used for setting up the SPS extractions and transfer lines with beam without having to inject into the LHC. Energy deposition and thermo-mechanical simulations have, however, shown that the TEDs will not be robust enough to safely absorb the high intensity beams foreseen for the high-luminosity LHC era. This paper will summarize the simulation results and limitations for upgrading the beam stoppers. An outline of the hardware upgrade strategy for the TEDs together with modifications to the SPS extraction interlock system to enforce intensity limitations for beam on the beam stoppers will be given.

  11. SYSTEM OF INCREASE OF LIBRARY WORKERS INFORMATIVE LITERACY

    Directory of Open Access Journals (Sweden)

    Svitlana M. Ivanova

    2011-02-01

    Full Text Available The article is devoted to the problems of modern information and communication technologies use in professional activity of library workers. The methods of increase of librarian informative literacy are offered. The special course aiming to prepare the skilled specialists who can decide innovative tasks on introduction, management and work with electronic resources is described. The tasks which will help listeners to enter in a theory and practice of electronic resources use in a modern library are decided in the course, such as: to form skills for working in electronic libraries; to teach the methods of modernization of informative librarian services on the base of technologies and resources of electronic libraries, freely Eprints software use.

  12. The Mayak Worker Dosimetry System (MWDS-2013): a comparison of intakes based on urine versus autopsy data from Mayak workers using the Leggett systemic model for plutonium

    International Nuclear Information System (INIS)

    Birchall, A.; Dorrian, M.-D.; Suslova, K. G.; Sokolova, A. B.

    2017-01-01

    The Mayak Worker Dosimetry System-2013 (MWDS-2013) uses a model developed by Leggett and colleagues to represent the biokinetic behaviour of plutonium after uptake to blood. Of particular importance, with regard to estimating intakes (and doses), is the distribution of activity between urine and body organs (particularly liver and skeleton). In this study, measurement data (urine and autopsy) from around 500 Mayak workers have been used to validate use of this model. A robust method has been developed and used to estimate intakes from both urine and autopsy data separately, and the ratio of these estimates has been calculated for each worker. The geometric mean ratio has been shown to lie within a range of 0.92-1.14, depending on assumptions made. Since this range includes 1, the hypothesis that the model is unbiased with regard to estimating intakes either with urine or autopsy data cannot be rejected on the basis of these data. This lends weight to the argument for increasing the MWDS-2013 cohort to include an additional 500 workers for whom only autopsy data are available, and who have previously been excluded from the cohort. Future directions in which this work could be extended are also suggested. (authors)

  13. New Spill Control for the Slow Extraction in the Multi-Cycling SPS

    CERN Document Server

    Kain, Verena; Effinger, Ewald

    2016-01-01

    The flux of particles slow extracted with the 1/3 integer resonance from the Super Proton Synchrotron at CERN was previously controlled with a servo-spill feedback system which acted on the horizontal tune such as to keep the spill rate as constant as possible during the whole extraction time. The current in two servo-quadrupoles was modulated as a function of the difference between the measured and the desired spill rate. With servo quadrupoles at a single location in the SPS ring and the SPS in multi-cycling mode, the trajectory of the slow extracted beam was seen to change from cycle to cycle depending on the current applied by the servo feedback. Hence this system was replaced by a feed-forward tune correction using the main SPS quadrupoles. In this way the spill control can now be guaranteed without changing the trajectory of the extracted beam. This paper presents the algorithm and implementation in the control system and summarizes the advantages of the new approach. The obtained spill characteristics ...

  14. Microwave energy transmission test toward the SPS using the space station

    Energy Technology Data Exchange (ETDEWEB)

    Kaya, N.; Matsumoto, H.; Miyatake, S.; Kimura, I.; Nagatomo, M.

    1986-12-01

    An outline of a project METT (Microwave Energy Transmission Test) using the Space Station is described. The objectives of the METT are to develop and test the technology of microwave energy transmission for the future Solar Power Satellite (SPS), and to estimate the environmental effects of the high power microwaves on the ionosphere and the atmosphere. Energy generated with solar cells is transmitted from a transmitting antenna on the bus platform near the Space Station to a rectenna on the sub-satellite or the ground station in order to test the total efficiency and the functions of the developed system of the energy transmission. Plasma similar to that in the D and E layers in the ionosphere is produced in a large balloon opened on the sub-satellite in order to investigate possible interactions between the SPS microwave and the ionospheric plasma and to determine the maximum power density of the microwave beam which passes through the ionosphere.

  15. Observation of strong leakage reduction in crystal assisted collimation of the SPS beam

    Energy Technology Data Exchange (ETDEWEB)

    Scandale, W. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Laboratoire de l' Accelerateur Lineaire (LAL), Universite Paris Sud Orsay, Orsay (France); INFN Sezione di Roma, Piazzale Aldo Moro 2, 00185 Rome (Italy); Arduini, G.; Butcher, M.; Cerutti, F.; Garattini, M.; Gilardoni, S.; Lechner, A.; Losito, R.; Masi, A.; Mereghetti, A.; Metral, E. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Mirarchi, D. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Imperial College, London (United Kingdom); Montesano, S.; Redaelli, S. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Rossi, R. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); INFN Sezione di Roma, Piazzale Aldo Moro 2, 00185 Rome (Italy); Schoofs, P.; Smirnov, G. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Bagli, E.; Bandiera, L.; Baricordi, S. [INFN Sezione di Ferrara, Dipartimento di Fisica, Università di Ferrara, Ferrara (Italy); and others

    2015-09-02

    In ideal two-stage collimation systems, the secondary collimator–absorber should have its length sufficient to exclude practically the exit of halo particles with large impact parameters. In the UA9 experiments on the crystal assisted collimation of the SPS beam a 60 cm long tungsten bar is used as a secondary collimator–absorber which is insufficient for the full absorption of the halo protons. Multi-turn simulation studies of the collimation allowed to select the position for the beam loss monitor downstream the collimation area where the contribution of particles deflected by the crystal in channeling regime but emerging from the secondary collimator–absorber is considerably reduced. This allowed observation of a strong leakage reduction of halo protons from the SPS beam collimation area, thereby approaching the case with an ideal absorber.

  16. Security warning method and system for worker safety during live-line working

    Science.gov (United States)

    Jiang, Chilong; Zou, Dehua; Long, Chenhai; Yang, Miao; Zhang, Zhanlong; Mei, Daojun

    2017-09-01

    Live-line working is an essential part in the operations in an electric power system. Live-line workers are required to wear shielding clothing. Shielding clothing, however, acts as a closed environment for the human body. Working in a closed environment for a long time can change the physiological responses of the body and even endanger personal safety. According to the typical conditions of live-line working, this study synthesizes environmental factors related to shielding clothing and the physiological factors of the body to establish the heart rate variability index RMSSD and the comprehensive security warning index SWI. On the basis of both indices, this paper proposes a security warning method and system for the safety live-line workers. The system can monitor the real-time status of workers during live-line working to provide security warning and facilitate the effective safety supervision by the live operation center during actual live-line working.

  17. Multiplicity fluctuations of identified hadrons in p+p interactions at SPS energies

    CERN Document Server

    Maćkowiak-Pawłowska, Maja

    2014-01-01

    Study of energy and system size fluctuations of identified hadrons is one of the key goals of NA61/SHINE at the CERN SPS. Results may allow to discover the critical point (CP) of strongly interacting matter as well as to uncover properties of the onset of deconfinement (OD). But fluctuations exhibit numerous other sources starting from most basic ones like volume effects and conservation laws. NA49 seems to observe fluctuations related to CP in collisions of medium size nuclei at top SPS energy. However, this result will remain inconclusive until systematic data on energy and system size dependence will be available. Moreover, fluctuations in p+p as well as in Pb+Pb interactions should be better understood. In this contribution results on multiplicity fluctuations of identified hadrons in p+p interactions at the CERN SPS energies will be presented. The NA61 data will be compared with the corresponding results from central Pb+Pb collisions of NA49 in the common acceptance region of both experiments. Moreover, ...

  18. The worker of the future. A system outlines the competencies its employees will need.

    Science.gov (United States)

    Hill, K; Meyer, B

    1998-01-01

    In 1993, Sisters of Mercy Health System-St. Louis (SMHS), having asked itself what kind of employees it would need in the twenty-first century, established a Worker of the Future Task Force to develop tentative answers. The task force began by making projections concerning healthcare, studying the strategic plans of SMHS's members, and surveying its employees. It learned that the system should help workers see how change could benefit them. Next, the task force studied the cultural history of the Sisters of Mercy, developing from it Six Guiding Principles for the evaluation of employee performance. From these principles, the task force derived Twelve Competencies that SMHS will seek in future workers. In 1995 the system's education leaders, with the aid of an internal training organization, decided to develop 17 training modules based on these guiding principles and competencies. Since then, more than 85 SMHS employees have been trained to help coworkers develop customer service skills and other competencies. SMHS has also incorporated the competencies in its job descriptions and performance evaluations, added the Worker of the Future curriculum to its orientation program for new employees, and is currently developing Worker of the Future training sessions for human resources personnel who interview prospective employees.

  19. Construction Strategies of Social Security System for Wan-jiang Urban Belt’s Migrant Workers

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Theoretical debate and practice exploration on social security of migrant workers were introduced.The political direction and security layer on social security for migrant workers in Wan-jiang urban belt were analyzed:the first layer is to implement wage payment guarantee and employment injury insurance;the second layer is to emphasize serious disease insurance and endowment insurance;the third layer is unemployed insurance and social assistance.The primary strategy of building a social security system for migrant workers in Wan-jiang urban belt was put up:wage payment guarantee system that is united in certain regions should be promoted;employment injury insurance system that is undertaken by enterprises should be built;a social health care system for serious diseases should be set up;multi-layers endowment insurance system for migrant workers should be created;vocational training and training in how to start a business should be built as well as the unemployment insurance system;social assistant system based on the basic cost of living allowances should be set up.

  20. Upgrade of the CERN SPS Extraction Protection Elements TPS

    CERN Document Server

    Borburgh, Jan; Barnes, Michael; Baud, Cedric; Fraser, Matthew; Kain, Verena; Maciariello, Fausto; Steele, Genevieve; Velotti, Francesco

    2017-01-01

    In 2006 the protection devices upstream of the septa in both extraction channels of the CERN SPS to the LHC were installed. Since then, new beam parameters have been proposed for the SPS beam towards the LHC in the framework of the LIU project. The mechanical parameters and assumptions on which these protection devices presently have been based, need validation before the new upgraded versions can be designed and constructed. The paper describes the design assumptions for the present protection device and the testing program for the TPSG4 at HiRadMat to validate them. Finally the requirements and the options to upgrade both extraction protection elements in the SPS are described.

  1. The SPS as accelerator of Pb$^{82+}$ ions

    CERN Document Server

    Faugier, A; Bailey, R; Blanchard, R R; Bohl, T; Brouzet, E; Burkhardt, H; Collier, Paul; Cornelis, Karel; de Rijk, G; Ferioli, F; Hilaire, A; Lamont, M; Linnecar, Trevor Paul R; Jonker, M; Niquille, C; Roy, G; Schmickler, Hermann

    1996-01-01

    In 1994 the CERN SPS was used for the first time to accelerate fully stripped ions of the Pb208 isotope from the equivalent proton momentum of 13 GeV/c to 400 GeV/c. In the CERN PS, which was used as injector, the lead was accelerated as Pb53+ ions and then fully stripped in the transfer line from PS to SPS. The radio frequency swing which is needed in order to keep the synchronism during acceleration is too big to have the SPS cavities deliver enough voltage for all frequencies. For that reason a new technique of fixed frequency acceleration was used. With this technique up to 70% of the injected beam could be captured and accelerated up to the extraction energy, the equivalent of 2.2 1010 charges. The beam was extracted over a 5 sec. long spill and was then delivered to different experiments at the same time.

  2. SPS/LEP beam transfer equipment control using industrial automation components

    International Nuclear Information System (INIS)

    Aimar, A.; Berard, G.; Bretin, J.L.; Carlier, E.; Dieperink, J.H.; Laffin, M.; Mertens, V.; Verhagen, H.

    1992-01-01

    Several control systems for SPS and LEP beam transfer equipment have to be commissioned in the near future. Tools for fast software development, easy maintenance and modifications, compliance with industrial standards, and independence of specific suppliers are considered to be essential. A large fraction of the systems can be realized using off-the-shelf industrial automation components like industrial I/O systems, programmable logic controllers, or diskless PCs. Specific electronics built up in G-64 can be integrated. Diskless systems running UNIX and X Windows are foreseen as process controllers and local access media. (author)

  3. Office worker response to an automated venetian blind and electric lighting system: A pilot study

    Energy Technology Data Exchange (ETDEWEB)

    Vine, E.; Lee, E.; Clear, R.; DiBartolomeo, D.; Selkowitz, S.

    1998-03-01

    A prototype integrated, dynamic building envelope and lighting system designed to optimize daylight admission and solar heat gain rejection on a real-time basis in a commercial office building is evaluated. Office worker response to the system and occupant-based modifications to the control system are investigated to determine if the design and operation of the prototype system can be improved. Key findings from the study are: (1) the prototype integrated envelope and lighting system is ready for field testing, (2) most office workers (N=14) were satisfied with the system, and (3) there were few complaints. Additional studies are needed to explain how illuminance distribution, lighting quality, and room design can affect workplans illuminance preferences.

  4. MODELLING SLOW EXTRACTION INDUCED RADIOACTIVITY IN SPS LSS2

    CERN Document Server

    Araujo Martinez, Aurora Cecilia; CERN. Geneva. TE Department

    2017-01-01

    The Accelerator and Beam Transfer (ABT) group is investigating the impact of recent proposals to extract higher proton intensities to Fixed Target experiments at the SPS. The 400 GeV high-energy proton beam is typically extracted over a few seconds using a resonant slow-extraction technique that induces small but unavoidable beam losses on the extraction equipment in SPS LSS2. In this report, the induced radioactivity for 2016-2017 is used to predict future activation levels and cool-down times, using a past intervention as a reference to predict dose to the personnel carrying-out maintenance of the accelerator.

  5. Coupling and Vertical Dispersion Correction in the SPS

    CERN Document Server

    Aiba, M; Franchi, A; Tomas, R; Vanbavinckhove, G

    2010-01-01

    Consolidation of the coupling correction scheme in the LHC is challenged by a missing skew quadrupole family in Sector 3-4 at the start-up in 2009-2010. Simultaneous coupling and vertical dispersion correction using vertical orbit bumps at the sextupoles, was studied by analyzing turn-byturn data. This scheme was tested in the CERN SPS where the optical structure of arc cells is quite similar to the LHC. In the SPS, horizontal and vertical beam positions are measured separately with single plane BPMs, thus a technique to construct ”pseudo double plane BPM” is also discussed.

  6. [The systemic and differential psychoprophylaxis of vascular brain diseases in the workers of an industrial enterprise].

    Science.gov (United States)

    Andreev, A G

    1994-01-01

    Basing on epidemiological, prospective and clinicopsychological data obtained on 1900 industrial workers of Nizhni Novgorod city, the system of psychoprophylaxis and psychotherapy of cerebrovascular diseases has been developed. The system of psychoprophylaxis was used with consideration of the disease stage and phase, psychic and psychosomatic status in risk groups, in subjects with initial and apparent symptoms of cerebrovascular failure. The psychoprophylactic system proved effective in the conditions of a large industrial enterprise.

  7. Cross-training workers in dual resource constrained systems with heterogeneous processing times

    NARCIS (Netherlands)

    Bokhorst, J. A. C.; Gaalman, G. J. C.

    2009-01-01

    In this paper, we explore the effect of cross-training workers in Dual Resource Constrained (DRC) systems with machines having different mean processing times. By means of queuing and simulation analysis, we show that the detrimental effects of pooling (cross-training) previously found in single

  8. Impact Of Low Grade Uranium Ores On The Echo System and the Workers of Phosphate Industry

    International Nuclear Information System (INIS)

    Anwar, S.M.

    1999-01-01

    The present study aims to investigate the influence of uranium present in phosphate rocks as an environmental factor in the ccho system and on the workers of Abu-Zaabal Phosphate Company subjected to the inhalation of big quantities of rock phosphate dust during the benefication of the ore and the production of the fertilizers. Besides. extra amount of uranium reach the workers also through two path ways.The first is direct through eating contaminated planted grown in the near by area.The second is indirect through eating animals fed with contaminated plants. The uranium content is estimated in the soil samples at different depths, water (irrigation and drainage), air samples and plant samples (shoot and root) in Berseem from the four directions, urine samples from twenty workers in charge of the processing of phosphate compared to twenty volunteers far from the contaminated area.The results showed an elevated values for phosphorus and uranium in the air, water. soil and plant (Berseem) around Abu Zaabal Factory and extending to about 2 km from all directions. Urine may be considered as a biological indicator medium for the uptake of uranium in uranium miners and the workers in charge of ore processing and can represent the major route of excretion for the absorbed metal. Significant differences were shown between the uranium level in the urine of workers group and the control group

  9. How do workers with a notified mental disorder experience the Danish Workers’ Compensation System?

    DEFF Research Database (Denmark)

    Ladegaard, Yun Katrine

    2014-01-01

    Background An increasing number of employees is notified with a mental disorder in the Danish Workers’ Compensation System (WCS). However, only few are recognized and even less are granted a compensation. Research shows that notification in WCS increases the risk of work disability (WD......), but research exploring workers' experiences of the WCS and what factors can lead to and protect against WD are lacking. This study aims at bridging this gap. Methods Semi-structured interviews were conducted with 10 workers notified with a mental disorder. The interview guide was developed based...... to fill out, and questions addressing the psychosocial work environment were missing. Communication from the Board of industrial Injuries (BOII) was lacking, and procedure and timelines unclear. Workers' goal was not to achieve eeconomical compensation, but that their disorder was recognised as caused...

  10. Analysis of workers' dose records from the Greek Dose Registry Information System

    International Nuclear Information System (INIS)

    Kamenopoulou, V.; Dimitriou, P.; Proukakis, Ch.

    1995-01-01

    The object of this work is the study of the individual film badge annual dose information of classified workers in Greece, monitored and assessed by the central dosimetry service of the Greek Atomic Energy Commission. Dose summaries were recorded and processed by the Dose Registry Information System. The statistical analysis refers to the years 1989-93 and deals with the distribution of individuals in the occupational groups, the mean annual dose, the collective dose, the distribution of the dose over the different specialties and the number of workers that have exceeded any of the established dose limits. Results concerning the annual dose summaries, demonstrate a year-by-year reduction in the mean individual dose to workers in the health sector. Conversely, exposures in the industrial sector did not show any decreasing tendency during the period under consideration. (Author)

  11. 75 FR 76038 - Zach System Corporation a Subdivision of Zambon Company, SPA Including On-Site Leased Workers of...

    Science.gov (United States)

    2010-12-07

    ... Subdivision of Zambon Company, SPA Including On-Site Leased Workers of Turner Industries and Go Johnson, La..., including on-site leased workers from Turner Industries and Go Johnson, La Porte, Texas. The Department's... investigation revealed that Zach System Corporation is a subdivision of Zambon Company, SPA, not Zach System SPA...

  12. Determination of pain in musculoskeletal system reported by office workers and the pain risk factors.

    Science.gov (United States)

    Celik, Sevim; Celik, Kadir; Dirimese, Elif; Taşdemir, Nurten; Arik, Tarik; Büyükkara, İbrahim

    2018-01-01

    This research was conducted as a cross-sectional descriptive study aimed at determining the existence of pain in the musculoskeletal system among office workers and the reasons for it. The sample consisted of 528 office workers. Collection of data was achieved using a questionnaire prepared by the researchers in line with information from the literature. The male and female office workers most frequently complained of pain in the lower back (55.1%), neck (52.5%) and back (53%). It was seen that out of the variables relating to the work environment, those which had the most significant effect on muscular-skeletal system pain were sitting at the desk for a long time without a break, working sitting on a chair that supported only the lumbar area and the arms, having the computer mouse at a distance from the keyboard, having the head inclined at 45° when working, working holding both forearms above the level of the desk, not taking exercise in daily life, and having a moderate or extremely stressful workplace (p office workers not to suffer musculoskeletal system pain, it is very important that the working environment should be ergonomically arranged and that various measures should be taken to ensure healthy life behavior. Int J Occup Med Environ Health 2018;31(1):91-111. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  13. From SPS to relativistic heavy-ion collider

    Indian Academy of Sciences (India)

    higher temperature, longer lifetime) for the study of quark matter. The advent ... A prominent topic of interest is the identification of thermal radiation emitted from the collision ... List of measurements at the CERN SPS. Dileptons .... There is consensus that a simple superposition of pp collisions cannot explain the data and that ...

  14. Analysis of the SPS Long Term Orbit Drifts

    Energy Technology Data Exchange (ETDEWEB)

    Velotti, Francesco [CERN; Bracco, Chiara [CERN; Cornelis, Karel [CERN; Drøsdal, Lene [CERN; Fraser, Matthew [CERN; Gianfelice-Wendt, Eliana [Fermilab; Goddard, Brennan [CERN; Kain, Verena [CERN; Meddahi, Malika [CERN

    2016-06-01

    The Super Proton Synchrotron (SPS) is the last accelerator in the Large Hadron Collider (LHC) injector chain, and has to deliver the two high-intensity 450 GeV proton beams to the LHC. The transport from SPS to LHC is done through the two Transfer Lines (TL), TI2 and TI8, for Beam 1 (B1) and Beam 2 (B2) respectively. During the first LHC operation period Run 1, a long term drift of the SPS orbit was observed, causing changes in the LHC injection due to the resulting changes in the TL trajectories. This translated into longer LHC turnaround because of the necessity to periodically correct the TL trajectories in order to preserve the beam quality at injection into the LHC. Different sources for the SPS orbit drifts have been investigated: each of them can account only partially for the total orbit drift observed. In this paper, the possible sources of such drift are described, together with the simulated and measured effect they cause. Possible solutions and countermeasures are also discussed.

  15. NA61/SHINE low energy program at SPS

    CERN Document Server

    Abgrall, N.; Andrieu, B.; Anticic, T.; Antoniou, N.; Argyriades, J.; Asryan, A.G.; Baatar, B.; Blondel, A.; Blumer, J.; Boldizsar, L.; Bravar, A.; Brzychczyk, J.; Bubak, A.; Bunyatov, S.A.; Choi, K.-U.; Christakoglou, P.; Chung, P.; Cleymans, J.; Derkach, D.A.; Diakonos, F.; Dominik, W.; Dumarchez, J.; Engel, R.; Ereditato, A.; Feofilov, G.A.; Fodor, Z.; Ferrero, A.; Gazdzicki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Hasegawa, T.; Haungs, A.; Igolkin, S.; Ivanov, A.S.; Ivashkin, A.; Kadija, K.; Katrynska, N.; Kielczewska, D.; Kikola, D.; Kisiel, J.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kolevatov, R.S.; Kondratiev, V.P.; Kowalski, S.; Kurepin, A.; Lacey, R.; Laszlo, A.; Lyubushkin, V.V.; Majka, Z.; Malakhov, A.I.; Marchionni, A.; Marcinek, A.; Maris, I.; Matveev, V.; Melkumov, G.L.; Meregaglia, A.; Messina, M.; Mijakowski, P.; Mitrovski, M.; Montaruli, T.; Mrowczynski, St.; Murphy, S.; Nakadaira, T.; Naumenko, P.A.; Nikolic, V.; Nishikawa, K.; Palczewski, T.; Palla, G.; Panagiotou, A.D.; Peryt, W.; Planeta, R.; Pluta, J.; Popov, B.A.; Posiadala, M.; Przewlocki, P.; Rauch, W.; Ravonel, M.; Renfordt, R.; Rohrich, D.; Rondio, E.; Rossi, B.; Roth, M.; Rubbia, A.; Rybczynski, M.; Sadovsky, A.; Sakashita, K.; Schuster, T.; Sekiguchi, T.; Seyboth, P.; Shibata, M.; Sissakian, A.N.; Skrzypczak, E.; Slodkowski, M.; Sorin, A.S.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Strabel, C.; Stroebele, H.; Susa, T.; Szentpetery, I.; Szuba, M.; Tada, M.; Taranenko, A.; Tsenov, R.; Ulrich, R.; Unger, M.; Vassiliou, M.; Vechernin, V.V.; Vesztergombi, G.; Wlodarczyk, Z.; Wojtaszek, A.; Zipper, W.

    2009-01-01

    Status of the new experimental program to study hadron production in hadron-nucleus and nucleus-nucleus collisions at the CERN SPS will be presented. A physics motivation will be given for the part of the program related to the physics of strongly interacting matter. Upgrades of the NA61 experimental set-up and data taking plans will be described in detail.

  16. Successful test of SPS-to-LHC beamline

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    On 23 October there was great excitement in the Prevessin control room when, on the first attempt, a beam passed over 2.5 km down the new SPS-to-LHC transfer line, TI8, to within a few metres of the LHC tunnel.

  17. Optics Measurements and Matching of TT2-TT10 Line for Injection of the LHC Beam in the SPS

    CERN Document Server

    Benedetto, E; Guerrero, A; Jacquet, D

    2008-01-01

    A well matched injection in the SPS is very important for preserving the emittance of the LHC beam. The paper presents the algorithms used for the analysis and the results of the optics measurements done in the transfer line TT2-TT10 and in the SPS. The dispersion is computed by varying the beam momentum and recording the offsets at the BPMs, while the Twiss parameters and emittance measurements in TT2-TT10 are performed with beam profile monitors equipped with OTR screens. These results are completed by those obtained with a matching monitor installed in the SPS as a prototype for the LHC. This device makes use of an OTR screen and a fast acquisition system, to get the turn by turn beam profiles right at injection in the ring, from which the beam mismatch is computed and compared with the results obtained in the line. Finally, on the basis of such measurements, a betatron and dispersion matching of TT2-TT10 for injection in the SPS has been performed and successfully put in operation.

  18. The Mayak Worker Dosimetry System (MWDS-2013): determination of the individual scenario of inhaled plutonium intake in the Mayak workers

    International Nuclear Information System (INIS)

    Sokolova, A. B.; Efimov, A. V.; Vostrotin, V. V.; Birchall, A.; Dorrian, M.-D.

    2017-01-01

    In order to estimate doses of workers exposed to plutonium, it is necessary to make assumptions about both the route and the time course of intake. The objective of this study was to determine a time course for the inhalation rate for plutonium (intake regime) useful for biokinetic modeling. Records from workplace air sampling, personnel biophysical examinations and autopsy data from former Mayak Production Association (MPA) workers were used. Plutonium accumulation strongly correlated with the volumetric activity of plutonium in workplace air. Using data from activity in air at MPA workplaces over time, a three-step function of intake was adopted. The adequacy of this three-step function was tested by comparing predicted doses using more complicated intake regimes. Uncertainties on the three-step function were also characterized based on air sampling data. The three-step function was assumed to be common to all workers, but an individual intake regime for each worker was calculated by convoluting it with the worker's actual employment history. (authors)

  19. 78 FR 42804 - Whirlpool Corporation, Including On-Site Leased Workers From Aerotek/Tek Systems (Subcontractor...

    Science.gov (United States)

    2013-07-17

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-82,346] Whirlpool Corporation, Including On-Site Leased Workers From Aerotek/Tek Systems (Subcontractor of IBM Corporation) and Jones Lang... firm. The workers were engaged in production of refrigerators and trash compactors as well as...

  20. 75 FR 28655 - Rexam Closure Systems, Inc. a Subsidiary of Rexam PLC Including On-Site Leased Workers From...

    Science.gov (United States)

    2010-05-21

    ... Hamlet, NC; Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance In..., applicable to the workers of Rexam Closure Systems, Inc., a subsidiary of Rexam PLC, Hamlet, North Carolina... paid through Owens Illinois Manufacturing, Hamlet, North Carolina, who became totally or partially...

  1. Factors influencing workers to follow food safety management systems in meat plants in Ontario, Canada.

    Science.gov (United States)

    Ball, Brita; Wilcock, Anne; Aung, May

    2009-06-01

    Small and medium sized food businesses have been slow to adopt food safety management systems (FSMSs) such as good manufacturing practices and Hazard Analysis Critical Control Point (HACCP). This study identifies factors influencing workers in their implementation of food safety practices in small and medium meat processing establishments in Ontario, Canada. A qualitative approach was used to explore in-plant factors that influence the implementation of FSMSs. Thirteen in-depth interviews in five meat plants and two focus group interviews were conducted. These generated 219 pages of verbatim transcripts which were analysed using NVivo 7 software. Main themes identified in the data related to production systems, organisational characteristics and employee characteristics. A socio-psychological model based on the theory of planned behaviour is proposed to describe how these themes and underlying sub-themes relate to FSMS implementation. Addressing the various factors that influence production workers is expected to enhance FSMS implementation and increase food safety.

  2. Occupational Safety and Health System for Workers Engaged in Emergency Response Operations in the USA.

    Science.gov (United States)

    Toyoda, Hiroyuki; Kubo, Tatsuhiko; Mori, Koji

    2016-12-03

    To study the occupational safety and health systems used for emergency response workers in the USA, we performed interviews with related federal agencies and conducted research on related studies. We visited the Federal Emergency Management Agency (FEMA) and National Institute for Occupational Safety and Health (NIOSH) in the USA and performed interviews with their managers on the agencies' roles in the national emergency response system. We also obtained information prepared for our visit from the USA's Occupational Safety and Health Administration (OSHA). In addition, we conducted research on related studies and information on the website of the agencies. We found that the USA had an established emergency response system based on their National Incident Management System (NIMS). This enabled several organizations to respond to emergencies cooperatively using a National Response Framework (NRF) that clarifies the roles and cooperative functions of each federal agency. The core system in NIMS was the Incident Command System (ICS), within which a Safety Officer was positioned as one of the command staff supporting the commander. All ICS staff were required to complete a training program specific to their position; in addition, the Safety Officer was required to have experience. The All-Hazards model was commonly used in the emergency response system. We found that FEMA coordinated support functions, and OSHA and NIOSH, which had specific functions to protect workers, worked cooperatively under NRF. These agencies employed certified industrial hygienists that play a professional role in safety and health. NIOSH recently executed support activities during disasters and other emergencies. The USA's emergency response system is characterized by functions that protect the lives and health of emergency response workers. Trained and experienced human resources support system effectiveness. The findings provided valuable information that could be used to improve the

  3. [The systemic approach to the health protection in the workers of industrial enterprises].

    Science.gov (United States)

    Oransky, I E; Razumov, A N; Fedorov, A A

    This paper presents the results of the systemic approach to the protection of health and prophylaxis of disability in the workers of industrial enterprises. The leading role in the technologies of rehabilitation (both short-term and long-term one) is played by the natural and physical therapeutic factors. The priority in the implementation of the therapeutic and health-promoting measures is given to the treatment based on the spa and health resort facilities as well as the factory health centers.

  4. Study of Real Time Location System For Worker in Containment Building at Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. Y.; Kim, G. S. [Samchang Enterprise Company, Ulsan (Korea, Republic of); Kim, H. S. [Ulsan Univ., Ulsan (Korea, Republic of)

    2012-03-15

    Workers are required special management to minimize radiation exposure in nuclear power plant. Especially, there are many limitation in their activities at containment building in nuclear power plant. Test personnel shall administer the workers by tracing the location of them inside containment building in nuclear power plant. They may be exposed to the unnecessary radiation due to a complex and high radiation area in the building. Test personnel needs to manage efficiently for worker's safety and work hours at containment building. Therefore, it is critical for the test personnel to notice the risk to the workers by identifying the location when the workers are facing the dangerous situation on the high area. In this paper, we introduce requirements and design method to develop the one and two dimensional RTLS(Real Time Locating System) by using CSS(Chirp Spread Spectrum) which enables precise location measurement and robust data communication even indoor environment with serious electromagnetic interference caused by complicated structure such as the inside of containment building in the nuclear power plant. In the algorithm to compute the distance, it is suggested to use SDS-TWR(Symmetrical Double-Sided Two-Way Ranging) to solve the issue of indirect routes, and develop the power circuit with 10mW of designing gain for output power to meet the KCC standard in order to increase the raging distance, in addition, communication between Anchor and distance measuring computer shall be designed to increase energy using time of Tags(nodes) by using CAN(Controller Area Network) communication.

  5. "One country, two systems": Sociopolitical implications for female migrant sex workers in Hong Kong

    Directory of Open Access Journals (Sweden)

    Griffiths Sian

    2008-12-01

    Full Text Available Abstract Background Under the "two countries, one system" policy implemented by China to manage the return of Hong Kong's sovereignty, Hong Kong has maintained a comparatively prosperous economy within the Asian region. This has resulted in an environment which fosters migration from the mainland to Hong Kong, due largely to proximity, higher earning potential, common language, and a relaxing of border control measures. However not all mainland China citizens are equally able to access these new migration schemes and indeed a number of women such as sex workers are either migrating and/or working illegally and without occupational, legal and health protection within Hong Kong. Discussion Female migrant sex workers are exposed to a number of significant threats to their health, however their illegal status contributes to even greater vulnerability. The prevailing discourses which view these women as either "trafficked women" or as "illegal immigrants" do not adequately account for the complex situations which result in such women's employment in Hong Kong's sex industry. Rather, their position can best be understood within the broader frameworks provided by migration literature and the concept of "structural violence". This allows for a greater understanding of the socio-political issues which are systematically denying migrant sex workers adequate access to health care and other opportunities for social advancement. When these issues are taken into account, it becomes clear that the current relevant legislation regarding both immigration and sex work is perpetuating the marginalised and vulnerable status of migrant sex workers. Unless changes are made, structural barriers will remain in place which impede the ability of migrant sex workers to manage their own health needs and status. Conclusion Female migrant sex workers in Hong Kong are extremely vulnerable to a number of occupational health and safety hazards which have significantly

  6. The Mayak Worker Dosimetry System (MWDS-2013): implementation of the dose calculations

    International Nuclear Information System (INIS)

    Zhdanov, A.; Vostrotin, V.; Efimov, A.; Birchall, A.; Puncher, M.

    2017-01-01

    The calculation of internal doses for the Mayak Worker Dosimetry System (MWDS-2013) involved extensive computational resources due to the complexity and sheer number of calculations required. The required output consisted of a set of 1000 hyper-realizations: each hyper-realization consists of a set (1 for each worker) of probability distributions of organ doses. This report describes the hardware components and computational approaches required to make the calculation tractable. Together with the software, this system is referred to here as the 'PANDORA system'. It is based on a commercial SQL server database in a series of six work stations. A complete run of the entire Mayak worker cohort entailed a huge amount of calculations in PANDORA and due to the relatively slow speed of writing the data into the SQL server, each run took about 47 days. Quality control was monitored by comparing doses calculated in PANDORA with those in a specially modified version of the commercial software 'IMBA Professional Plus'. Suggestions are also made for increasing calculation and storage efficiency for future dosimetry calculations using PANDORA. (authors)

  7. The hardware implementation of the CERN SPS ultrafast feedback processor demonstrator

    CERN Document Server

    Dusakto, J E; Fox, J D; Olsen, J; Rivetta, C H; Höfle, W

    2013-01-01

    An ultrafast 4GSa/s transverse feedback processor has been developed for proof-of-concept studies of feedback control of e-cloud driven and transverse mode coupled intra-bunch instabilities in the CERN SPS. This system consists of a high-speed ADC on the front end and equally fast DAC on the back end. All control and signal processing is implemented in FPGA logic. This system is capable of taking up to 16 sample slices across a single SPS bunch and processing each slice individually within a reconfigurable signal processor. This demonstrator system is a rapidly developed prototype, consisting of both commercial and custom-design components. It can stabilize the motion of a single particle bunch using closed loop feedback. The system can also run open loop as a high-speed arbitrary waveform generator and contains diagnostic features including a special ADC snapshot capture memory. This paper describes the overall system, the feedback processor and focuses on the hardware architecture, design ...

  8. Development of Work Verification System for Cooperation between MCR Operators and Field Workers in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Min; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Lee, Hyun Chul [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    In this work, as an application of digital devices to NPPs, a cooperation support system to aid communication between MCR operators and field workers in Nuclear Power Plants (NPPs), NUclear COoperation Support and MObile document System (Nu-COSMOS), is suggested. It is not easy for MCR operators to estimate whether field workers conduct their work correctly because MCR operators cannot monitor field workers at a real time, and records on paper procedure written by field workers do not contain the detailed information about work process and results. Thus, for safety operation without any events induced by misunderstand and miscommunication between MCR operators and field workers, the Nu-COSMOS is developed and it will be useful from the supporting cooperation point of view. To support the cooperation between MCR operators and field workers in NPPs, the cooperation support and mobile documentation system Nu-COSMOS is suggested in this work. To improve usability and applicability of the suggested system, the results of using existed digital device based support systems were analyzed. Through the analysis, the disincentive elements of using digital device-based developments and the recommendations for developing new mobile based system were derived. Based on derived recommendations, two sub systems, the mobile device based in-formation storing system and the large screen based information sharing system were suggested. The usability of the suggested system will be conducted by a survey with questionnaires. Field workers and operators, and nuclear-related person who had experiences as an operator, graduate students affiliated in nuclear engineering department will use and test the functions of the suggested system. It is expected that the mobile based information storing system can reduce the field workers' work load and enhance the understanding of MCR operators about field operators work process by monitoring all work results and work processes stored in devices.

  9. Development of Work Verification System for Cooperation between MCR Operators and Field Workers in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Lee, Seung Min; Seong, Poong Hyun; Lee, Hyun Chul

    2014-01-01

    In this work, as an application of digital devices to NPPs, a cooperation support system to aid communication between MCR operators and field workers in Nuclear Power Plants (NPPs), NUclear COoperation Support and MObile document System (Nu-COSMOS), is suggested. It is not easy for MCR operators to estimate whether field workers conduct their work correctly because MCR operators cannot monitor field workers at a real time, and records on paper procedure written by field workers do not contain the detailed information about work process and results. Thus, for safety operation without any events induced by misunderstand and miscommunication between MCR operators and field workers, the Nu-COSMOS is developed and it will be useful from the supporting cooperation point of view. To support the cooperation between MCR operators and field workers in NPPs, the cooperation support and mobile documentation system Nu-COSMOS is suggested in this work. To improve usability and applicability of the suggested system, the results of using existed digital device based support systems were analyzed. Through the analysis, the disincentive elements of using digital device-based developments and the recommendations for developing new mobile based system were derived. Based on derived recommendations, two sub systems, the mobile device based in-formation storing system and the large screen based information sharing system were suggested. The usability of the suggested system will be conducted by a survey with questionnaires. Field workers and operators, and nuclear-related person who had experiences as an operator, graduate students affiliated in nuclear engineering department will use and test the functions of the suggested system. It is expected that the mobile based information storing system can reduce the field workers' work load and enhance the understanding of MCR operators about field operators work process by monitoring all work results and work processes stored in devices

  10. Neutral strange particle production at top SPS energy measured by the CERES experiment

    International Nuclear Information System (INIS)

    Radomski, S.

    2006-01-01

    Systematics of strange particle production in collisions of ultrarelativistic nuclei provides an insight into the properties of the strongly interacting matter. Hadrochemistry, the study of the relative yields, provides information about chemical freeze-out and the position of the system in the phase diagram. Strangeness production at Super Proton Synchrotron (SPS) energies is not fully explained by the thermal model of hadron gas. Data reported by one experiment show sharp structures as a function of energy which are interpreted as a signature for a phase transition, but due to discrepancies in the results between two different experiments, a conclusion can not be drawn. This thesis is part of an effort to build a database of the strangeness production at SPS energy. The particular subject of this work is a precise measurement of the production of K S 0 . The results are compared with two other experiments and the prediction of the thermal model. The high precision data shed light on the systematics of strangeness production and allow clarification of the experimental status. The study of transverse momentum spectra provides information about the temperature and the radial expansion of the system. Here, as in the case of particle yields, interesting structures are visible as a function of energy. A rapid increase in the number of degrees of freedom is visible in the SPS region. A large part of the strangeness is carried by the neutral strange baryon Λ. Here the experimental situation is even more complicated because the reconstruction of the Λ yield requires large extrapolation to low transverse momentum. In this work first results on Λ production will be presented. (orig.)

  11. Neutral strange particle production at top SPS energy measured by the CERES experiment

    Energy Technology Data Exchange (ETDEWEB)

    Radomski, S.

    2006-07-05

    Systematics of strange particle production in collisions of ultrarelativistic nuclei provides an insight into the properties of the strongly interacting matter. Hadrochemistry, the study of the relative yields, provides information about chemical freeze-out and the position of the system in the phase diagram. Strangeness production at Super Proton Synchrotron (SPS) energies is not fully explained by the thermal model of hadron gas. Data reported by one experiment show sharp structures as a function of energy which are interpreted as a signature for a phase transition, but due to discrepancies in the results between two different experiments, a conclusion can not be drawn. This thesis is part of an effort to build a database of the strangeness production at SPS energy. The particular subject of this work is a precise measurement of the production of K{sub S}{sup 0}. The results are compared with two other experiments and the prediction of the thermal model. The high precision data shed light on the systematics of strangeness production and allow clarification of the experimental status. The study of transverse momentum spectra provides information about the temperature and the radial expansion of the system. Here, as in the case of particle yields, interesting structures are visible as a function of energy. A rapid increase in the number of degrees of freedom is visible in the SPS region. A large part of the strangeness is carried by the neutral strange baryon {lambda}. Here the experimental situation is even more complicated because the reconstruction of the {lambda} yield requires large extrapolation to low transverse momentum. In this work first results on {lambda} production will be presented. (orig.)

  12. Central nervous system tumors and related intracranial pathologies in radium dial workers

    International Nuclear Information System (INIS)

    Stebbings, J.H.; Semkiw, W.

    1988-01-01

    Among the female radiation workers in the radium dial industry there is no overall excess of brain or central nervous system tumors. A significant excess did appear, however, in one of three major cohorts; the excess was not due to an excess of gliomas and cannot be ascribed with certainty to radium or external radiation. A significant proportional excess of tumors outside the brain was observed, and is consistent with irradiation of nervous system tissue from adjacent bone. Early deaths from brain abscess or mastoiditis, which are coded as diseases of the nervous system and sense organs, were observed. 12 refs., 11 tabs

  13. Central nervous system tumours and related intracranial pathologies in radium dial workers

    International Nuclear Information System (INIS)

    Stebbings, J.H.; Semkiw, W.

    1989-01-01

    Among female radiation workers in the radium dial industry there is no overall excess of fatal brain or central nervous system tumours. A significant excess did appear, in one of three major cohorts; the excess was not due to an excess of gliomas and cannot be ascribed with certainty to radium or external radiation. A significant proportional excess of tumours outside of the brain was observed, consistent with irradiation of nervous system tissue from adjacent bone. Excess tumours of the eye, pituitary or pineal did not occur. Early deaths from brain abscess or mastoiditis, coded as diseases of the nervous system and sense organs, were observed. (author)

  14. International collaborative study of the endogenous reference gene, sucrose phosphate synthase (SPS), used for qualitative and quantitative analysis of genetically modified rice.

    Science.gov (United States)

    Jiang, Lingxi; Yang, Litao; Zhang, Haibo; Guo, Jinchao; Mazzara, Marco; Van den Eede, Guy; Zhang, Dabing

    2009-05-13

    One rice ( Oryza sativa ) gene, sucrose phosphate synthase (SPS), has been proven to be a suitable endogenous reference gene for genetically modified (GM) rice detection in a previous study. Herein are the reported results of an international collaborative ring trial for validation of the SPS gene as an endogenous reference gene and its optimized qualitative and quantitative polymerase chain reaction (PCR) systems. A total of 12 genetically modified organism (GMO) detection laboratories from seven countries participated in the ring trial and returned their results. The validated results confirmed the species specificity of the method through testing 10 plant genomic DNAs, low heterogeneity, and a stable single-copy number of the rice SPS gene among 7 indica varieties and 5 japonica varieties. The SPS qualitative PCR assay was validated with a limit of detection (LOD) of 0.1%, which corresponded to about 230 copies of haploid rice genomic DNA, while the limit of quantification (LOQ) for the quantitative PCR system was about 23 copies of haploid rice genomic DNA, with acceptable PCR efficiency and linearity. Furthermore, the bias between the test and true values of eight blind samples ranged from 5.22 to 26.53%. Thus, we believe that the SPS gene is suitable for use as an endogenous reference gene for the identification and quantification of GM rice and its derivates.

  15. [Preliminary study on evaluation system of mental workers strain based on primary and middle school teachers].

    Science.gov (United States)

    Lian, Yulong; Liu, Jiwen; Zhang, Chen; Yuan, Fang

    2010-09-01

    To use primary and middle schools teacher as samples to preliminarily build the mental work stress effect evaluation system, providing the methological platform for the research on the stress effect mechanism and mental workers interference measures. 851 teachers in primary and middle schools were selected with randomly stratified cluster methods. Use ISTA 6.0 and Life Events Evaluation Table to measure the stress factors, and use Work Tension Reaction Questionnaire, Symptom Self-Evaluation Table Questionnaire, and General Happiness Sensing Table to measure psychological stress reaction, blood sugar and blood fat, blood cortical, ACTH, nerve behavior function, for measuring physiological stress reaction. The Comprehensive Working Ability Index Table to measure working ability. And then use the mathematical model to build the mental workers stress effect evaluation system. And apply the simple random sampling method to select 400 environmental protection workers to perform cross effect validation. The model fits relatively well (RMSEA = 0.100, GFI = 0.93, NNFI = 1.00, CFI = 1.00) and conforms with the theory, reflecting the loads of the indice, such as, working stress reaction, psychological stress reaction, physiological stress reaction and working ability, are relatively high. At the same time, the stress reaction of those 4 dimensions can fit the 2-grade factor (stress effect) very well. The physiological stress reaction is negatively correlated (P working stress reaction, psychological stress reaction, working ability decrease, while is positively correlated (P working stress, psychological stress reaction, physiological stress reaction and working ability decrease. The social support is the protection factor for working stress, psychological stress reaction, physiological stress reaction and working ability decrease (gamma(s) are -0.55, -0.77, 0.73, -0.79, respectively, P working stress factors, social life stress factors and dangerous individual characters are

  16. A 40 MHz Bunch by Bunch Intensity Measurement for the CERN SPS and LHC

    CERN Document Server

    Jakob, H; Jones, R; Jensen, L

    2003-01-01

    A new acquisition system has been developed to allow the measurement of the individual intensity of each bunch in a 40MHz bunch train. Such a system will be used for the measurement of LHC type beams after extraction from the CERN-PS right through to the dump lines of the CERN-LHC. The method is based on integrating the analogue signal supplied by a Fast Beam Current Transformer at a frequency of 40MHz. This has been made possible with the use of a fast integration ASIC developed by the University of Clermont-Ferrand, France, for the LHC-b pre-shower detector. The output of the integrator is digitised using a 12-bit ADC and fed into a Digital Acquisition Board (DAB) that was originally developed by TRIUMF, Canada, for use in the LHC orbit system. A full system set-up was commissioned during 2002 in the CERN-SPS, and following its success will now be extended in 2003 to cover the PS to SPS transfer lines and the new TT40 LHC extraction channel.

  17. Charmonia suppression in nucleus-nucleus interactions at CERN SPS

    CERN Document Server

    Arnaldi, R; Alexa, C; Arnaldi, R; Atayan, M; Baglin, C; Baldit, A; Bedjidian, M; Beolè, S; Boldea, V; Bordalo, P; Borenstein, S R; Borges, G; Bussière, A; Capelli, L; Castanier, C; Castor, J I; Chaurand, B; Cheynis, B; Chiavassa, E; Cicalò, C; Claudino, T; Comets, M P; Constantinescu, S; Cortese, P; Cruz, J; De Falco, A; De Marco, N; Dellacasa, G; Devaux, A; Dita, S; Drapier, O; Espagnon, B; Fargeix, J; Force, P; Gallio, M; Gavrilov, Yu K; Gerschel, C; Giubellino, P; Golubeva, M B; Gonin, M; Grigorian, A A; Grigorian, S; Grossiord, J Y; Guber, F F; Guichard, A; Gulkanian, H R; Hakobyan, R S; Haroutunian, R; Idzik, M; Jouan, D; Karavitcheva, T L; Kluberg, L; Kurepin, A B; Le Bornec, Y; Lourenço, C; Macciotta, P; MacCormack, M; Marzari-Chiesa, A; Masera, M; Masoni, A; Monteno, M; Musso, A; Petiau, P; Piccotti, A; Pizzi, J R; Prado da Silva, W L; Prino, F; Puddu, G; Quintans, C; Ramello, L; Ramos, S; Rato-Mendes, P; Riccati, L; Romana, A; Scalas, E; Saturnini, P; Scomparin, E; Serci, S; Shahoyan, R; Sigaudo, F; Sitta, M; Sonderegger, P; Tarrago, X; Topilskaya, N S; Usai, G L; Vercellin, E; Villatte, L; Willis, N; Wu, T

    2004-01-01

    The NA50 experiment at CERN SPS has studied charmonium production in Pb-Pb collisions at 158 GeV/c per nucleon. According to the theoretical predictions the observation of the suppression of the J/ psi production yield is expected to be an unambiguous probe for a phase transition from ordinary nuclear matter towards a state in which quarks and gluons are deconfined. (10 refs).

  18. SPS transfer line TT60 towards W-Area

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    Tranfer line TT60 from SPS LSS6 towards the W-Area. View in the direction of the beam. After the magnet, there is a secondary-emission profile monitor, followed by a secondary-emission split-foil (for centering the beam). A TV camera (sticking up prominently) looks at a scintillator screen. The huge tank (with a person standing behind it) houses a beam dump (allowing setting- up of extraction without sending a beam to the W-Area).

  19. Longitudinal stability of the LHC beam in the SPS

    CERN Document Server

    Shaposhnikova, Elena

    2001-01-01

    Longitudinal beam stability is analysed for the LHC Beam in the SPS. The most critical area is shown to be the top energy. Analysis explains some results of measurements with the beam done d uring the MDs last year. The possibility of using this cycle for CNGS is considered as well. There, without special requirements on bunch parameters at extraction, the impedance limitations move to the lowest energy. An option with low transition energy is presented also.

  20. Successful test of SPS-to-LHC beamline

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    On 23 October there was great excitement in the Prevessin control room when, on the first attempt, a beam passed over 2.5 km down the new SPS-to-LHC transfer line, TI8, to within a few metres of the LHC tunnel. Members of the AB, AT and TS departments involved in the beamline and its test, celebrate their success with the Director General, Robert Aymar, and the LHC Project Leader, Lyn Evans.

  1. Successful test of SPS-to-LHC beamline

    CERN Multimedia

    2004-01-01

    On 23 October there was great excitement in the Prevessin control room when, on the first attempt, a beam passed over 2.5 km down the new SPS-to-LHC transfer line, TI8, to within a few metres of the LHC tunnel. Above: members of the AB, AT and TS departments involved in the beamline and its test, celebrate their success with the Director General, Robert Aymar, and the LHC Project Leader, Lyn Evans.

  2. An Embedded Sensory System for Worker Safety: Prototype Development and Evaluation.

    Science.gov (United States)

    Cho, Chunhee; Park, JeeWoong

    2018-04-14

    At a construction site, workers mainly rely on two senses, which are sight and sound, in order to perceive their physical surroundings. However, they are often hindered by the nature of most construction sites, which are usually dynamic, loud, and complicated. To overcome these challenges, this research explored a method using an embedded sensory system that might offer construction workers an artificial sensing ability to better perceive their surroundings. This study identified three parameters (i.e., intensity, signal length, and delay between consecutive pulses) needed for tactile-based signals for the construction workers to communicate quickly. We developed a prototype system based on these parameters, conducted experimental studies to quantify and validate the sensitivity of the parameters for quick communication, and analyzed test data to reveal what was added by this method in order to perceive information from the tactile signals. The findings disclosed that the parameters of tactile-based signals and their distinguishable ranges could be perceived in a short amount of time (i.e., a fraction of a second). Further experimentation demonstrated the capability of the identified unit signals combined with a signal mapping technique to effectively deliver simple information to individuals and offer an additional sense of awareness to the surroundings. The findings of this study could serve as a basis for future research in exploring advanced tactile-based messages to overcome challenges in environments for which communication is a struggle.

  3. An Embedded Sensory System for Worker Safety: Prototype Development and Evaluation

    Science.gov (United States)

    Cho, Chunhee; Park, JeeWoong

    2018-01-01

    At a construction site, workers mainly rely on two senses, which are sight and sound, in order to perceive their physical surroundings. However, they are often hindered by the nature of most construction sites, which are usually dynamic, loud, and complicated. To overcome these challenges, this research explored a method using an embedded sensory system that might offer construction workers an artificial sensing ability to better perceive their surroundings. This study identified three parameters (i.e., intensity, signal length, and delay between consecutive pulses) needed for tactile-based signals for the construction workers to communicate quickly. We developed a prototype system based on these parameters, conducted experimental studies to quantify and validate the sensitivity of the parameters for quick communication, and analyzed test data to reveal what was added by this method in order to perceive information from the tactile signals. The findings disclosed that the parameters of tactile-based signals and their distinguishable ranges could be perceived in a short amount of time (i.e., a fraction of a second). Further experimentation demonstrated the capability of the identified unit signals combined with a signal mapping technique to effectively deliver simple information to individuals and offer an additional sense of awareness to the surroundings. The findings of this study could serve as a basis for future research in exploring advanced tactile-based messages to overcome challenges in environments for which communication is a struggle. PMID:29662008

  4. The "toxic dose" of system problems: why some injured workers don't return to work as expected.

    Science.gov (United States)

    MacEachen, Ellen; Kosny, Agnieszka; Ferrier, Sue; Chambers, Lori

    2010-09-01

    Introduction Most workers who incur an injury on the job follow a relatively straightforward path through a workers' compensation claim, recovery and return to work. However, a minority of compensation claims is prolonged and can be disproportionately costly. We conducted this qualitative study in order to gain an understanding of systemic, process-related problems affecting injured workers who had failed to return to work as expected. Method A total of 69 in-depth interviews were conducted with injured workers with complex and extended workers' compensation claims and with return-to-work (RTW) providers such as health care providers, insurers, legal advisors, and workplaces. The study was based in Ontario, Canada. A modified grounded theory analysis led to the identification of common mechanisms in RTW problems. Results We identify problems with return to work and extended workers' compensation claims in dysfunctions in organizational dynamics across RTW systems including the workplace, healthcare, vocational rehabilitation and workers' compensation. These system problems are difficult to identify because they appear as relatively mundane and bureaucratic. These appeared to have damaging effects on workers in the form of a 'toxic dose' affecting the worker beyond the initial injury. Conclusions Worker's problems with extended claims were linked to RTW policies that did not easily accommodate conflict or power imbalances among RTW parties and by social relations and processes that impeded communication about RTW situations and problems. Avenues for intervention are located in a shift to a critical lens to RTW process that addresses differences of knowledge, resources, and interests among different parties.

  5. Assessors for communication skills: SPs or healthcare professionals?

    Science.gov (United States)

    Liew, Siaw-Cheok; Dutta, Susmita; Sidhu, Jagmohni Kaur; De-Alwis, Ranjit; Chen, Nicole; Sow, Chew-Fei; Barua, Ankur

    2014-07-01

    The complexity of modern medicine creates more challenges for teaching and assessment of communication skills in undergraduate medical programme. This research was conducted to study the level of communication skills among undergraduate medical students and to determine the difference between simulated patients and clinical instructors' assessment of communication skills. This comparative study was conducted for three months at the Clinical Skills and Simulation Centre of the International Medical University in Malaysia. The modified Calgary-Cambridge checklist was used to assess the communication skills of 50 first year and 50 second year medical students (five-minutes pre-recorded interview videos on the scenario of sore throat). These videos were reviewed and scored by simulated patients (SPs), communication skills instructors (CSIs) and non-communication skills instructors (non-CSIs). Better performance was observed among the undergraduate medical students, who had formal training in communication skills with a significant difference in overall scores detected among the first and second year medical students (p = 0.0008). A non-significant difference existed between the scores of SPs and CSIs for Year 1 (p = 0.151). The SPs could be trained and involved in assessment of communication skills. Formal training in communication skills is necessary in the undergraduate medical programme.

  6. Development of database management system for monitoring of radiation workers for actinides

    International Nuclear Information System (INIS)

    Kalyane, G.N.; Mishra, L.; Nadar, M.Y.; Singh, I.S.; Rao, D.D.

    2012-01-01

    Annually around 500 radiation workers are monitored for estimation of lung activities and internal dose due to Pu/Am and U from various divisions of Bhabha Atomic Research Centre (Trombay) and from PREFRE and A3F facilities (Tarapur) in lung counting laboratory located at Bhabha Atomic Research Centre hospital under Routine and Special monitoring program. A 20 cm diameter phoswich and an array of HPGe detector were used for this purpose. In case of positive contamination, workers are followed up and monitored using both the detection systems in different geometries. Management of this huge data becomes difficult and therefore an easily retrievable database system containing all the relevant data of the monitored radiation workers. Materials and methods: The database management system comprises of three main modules integrated together: 1) Apache server installed on a Windows (XP) platform (Apache version 2.2.17) 2) MySQL database management system (MySQL version 5.5.8) 3) PHP (Preformatted Hypertext) programming language (PHP version 5.3.5). All the 3 modules work together seamlessly as a single software program. The front end user interaction is through an user friendly and interactive local web page where internet connection is not required. This front page has hyperlinks to many other pages, which have different utilities for the user. The user has to log in using username and password. Results and Conclusions: Database management system is used for entering, updating and management of lung monitoring data of radiation workers, The program is having following utilities: bio-data entry of new subjects, editing of bio-data of old subjects (only one subject at a time), entry of counting data of that day's lung monitoring, retrieval of old records based on a number of parameters and filters like date of counting, employee number, division, counts fulfilling a given criterion, etc. and calculation of MEQ CWT (Muscle Equivalent Chest Wall Thickness), energy

  7. Regional economic development programs related to the registration systems for the health records of radiation workers

    International Nuclear Information System (INIS)

    Nakagawa, Haruo; Kanda, Keiji

    2000-01-01

    The two policies, 'Promotion of Health Care for Elderly Person' and Completion of Health Care System' are important for regional economic development. If we apply the Health Records Registration Systems for Radiation Workers to the Regional Health Care System, we can get a more effective plan for regional economic development. In Japan, most of the electric power companies depend on radiation works to the external labor. As the chance of employment usually depends on the time and the period of outage of nuclear power stations, the employment of radiation works lacks its stability. From the analysis on the mobility of radiation workers, we can see the stability of employment increases in proportion to the number of reactors. This paper proposes the need for such a registration system to be granted under three laws governing special accounts for power supply municipalities and to set up the system within regional medical information systems. It also proposes the founding of an Overall Health Insurance Cooperative, managed by contractors safety union in the municipalities as soon as the condition of founding, 3, 000 people, is satisfied. (author)

  8. A system of safety management practices and worker engagement for reducing and preventing accidents: an empirical and theoretical investigation.

    Science.gov (United States)

    Wachter, Jan K; Yorio, Patrick L

    2014-07-01

    The overall research objective was to theoretically and empirically develop the ideas around a system of safety management practices (ten practices were elaborated), to test their relationship with objective safety statistics (such as accident rates), and to explore how these practices work to achieve positive safety results (accident prevention) through worker engagement. Data were collected using safety manager, supervisor and employee surveys designed to assess and link safety management system practices, employee perceptions resulting from existing practices, and safety performance outcomes. Results indicate the following: there is a significant negative relationship between the presence of ten individual safety management practices, as well as the composite of these practices, with accident rates; there is a significant negative relationship between the level of safety-focused worker emotional and cognitive engagement with accident rates; safety management systems and worker engagement levels can be used individually to predict accident rates; safety management systems can be used to predict worker engagement levels; and worker engagement levels act as mediators between the safety management system and safety performance outcomes (such as accident rates). Even though the presence of safety management system practices is linked with incident reduction and may represent a necessary first-step in accident prevention, safety performance may also depend on mediation by safety-focused cognitive and emotional engagement by workers. Thus, when organizations invest in a safety management system approach to reducing/preventing accidents and improving safety performance, they should also be concerned about winning over the minds and hearts of their workers through human performance-based safety management systems designed to promote and enhance worker engagement. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. Occupational reporiductive system diseases in female workers employed at worplaces with harmful working conditions

    Directory of Open Access Journals (Sweden)

    M.A. Fesenko

    2017-09-01

    Full Text Available The paper outlines the data obtained in the course of long-term research dedicated to studying the extent to which re-productive system pathologies in workers with high-risk occupations are occupationally induced. Their peculiarity is joint impacts of various occupational factors (for example, impacts exerted by chemicals together with physical and biological factors, and labor hardness and intensity as well on a female body. Our research goal was to examine the extent to which reproductive system pathologies in workers with high-risk occupations were occupationally induced. To achieve it, we applied statistical estimate of correlation between health disorders and work. Our occupational group included a number of occupations with harmful or hazardous working conditions in civil en-gineering, metallurgy, chemical industry, polymer-processing industry, and health care as well. As a rule, working condi-tions class of workers from the examined groups varied from 3.1 to 3.3; and occupation with permissible working conditions were used as a comparative group. The research results revealed that there are certain occupations with high risk of reproductive health disorders evolvement and infants development pathologies evolvement. They are: – model makers and checkers in civil engineering and crane operators at a metallurgic plant; – analysts at chemical analysis laboratories, chemical engineers in chemical industry (including petrochemical plants, polymer-processing plants, and organic synthesis plants; – surgeons, obstetrician-gynecologists, midwives, surgical nurses working in in-patient departments. Estimate of correlation and occupational dependence of reproductive system diseases on working conditions revealed that women with harmful working conditions (3.1–3.3 hazard class had defective pregnancies or labor pathologies which had strong and average correlation with working conditions. Health disorders in newborns were estimated as per very

  10. A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS

    CERN Document Server

    Schröder, G H; Carlier, E; Dieperink, J H; Ducimetière, L; Goddard, B; Lázár, C; Mayer, M; Vossenberg, Eugène B; Weterings, W

    2000-01-01

    A new East Fast-Extraction System is under construction in the SPS, to supply particles with a maximum batch length of 7.8 us and 10.5 us to the LHC and to CNGS (CERN Neutrino to Gran Sasso), respectively. The extraction septum magnets actually used at the SPS have been designed for slow extraction over several seconds, have large cooling and electrical power demands and need frequently maintenance in a high radiation environment. A fast system of only 250 us pulse duration has therefore been developed, using a half-sine excitation pulse with a superimposed third harmonic. The short pulse duration requires very thin magnetic yoke laminations, which can not easily be stamped and stacked. Profiting from a development for the LHC beam dump kicker magnets, the yoke is therefore built-up from tape-wound cylindrical cores, employing 50 um thick Si-steel tape. Thirty two cores are stacked longitudinally to produce a yoke of 3.2 meter length. The aperture is cut radial into each cylinder. The cores are radial compres...

  11. Charmonia Production at the CERN/SPS

    CERN Document Server

    Borges, G; Alessandro, B; Alexa, C; Arnaldi, R; Atayan, M; Beolè, S; Boldea, V; Bordalo, P; Borges, G; Castanier, C; Castor, J; Chaurand, B; Cheynis, B; Chiavassa, E; Cicalò, C; Comets, M P; Constantinescu, S; Cortese, P; De Falco, A; De Marco, N; Dellacasa, G; Devaux, A; Dita, S; Fargeix, J; Force, P; Gallio, M; Gerschel, C; Giubellino, P; Golubeva, M B; Grigorian, A A; Grigorian, S; Guber, F F; Guichard, A; Gulkanian, H R; Idzik, M; Jouan, D; Karavicheva, T L; Kluberg, L; Kurepin, A B; Le Bornec, Y; Lourenço, C; MacCormick, M; Marzari-Chiesa, A; Masera, M; Masoni, A; Monteno, M; Musso, A; Petiau, P; Piccotti, A; Pizzi, J R; Prino, F; Puddu, G; Quintans, C; Ramello, L; Ramos, S; Riccati, L; Santos, H; Saturnini, P; Scomparin, E; Serci, S; Shahoyan, R; Sigaudo, F; Sitta, M; Sonderegger, P; Tarrago, X; Topilskaya, N S; Usai, G L; Vercellin, E; Villatte, L; Willis, N; Wu, T

    2006-01-01

    We present the final results of experiment NA50 on charmonia production in Pb-Pb interactions at 158 A GeV. A strong increasing suppression is observed with increasing centrality, for both the jpsi and psiprime resonances. We also present new developments regarding the jpsi and psiprime normal nuclear absorption determinations deduced from proton-nucleus data only. Their comparison with Pb-Pb results allows us to conclude that the jpsi anomalous suppression sets in at mid-centralities while the S-U results show a reasonable agreement with the p-A behavior. The psiprime suffers a significantly stronger suppression already in S-U interactions, which continuously increases in the Pb-Pb system, and is completely incompatible with the expected behavior deduced from p-A collisions.

  12. Workers' load and job-related stress after a reform and work system change in a hospital kitchen in Japan.

    Science.gov (United States)

    Matsuzuki, Hiroe; Haruyama, Yasuo; Muto, Takashi; Aikawa, Kaoru; Ito, Akiyoshi; Katamoto, Shizuo

    2013-03-01

    Many kitchen work environments are considered to be severe; however, when kitchens are reformed or work systems are changed, the question of how this influences kitchen workers and environments arises. The purpose of this study is to examine whether there was a change in workload and job-related stress for workers after a workplace environment and work system change in a hospital kitchen. The study design is a pre-post comparison of a case, performed in 2006 and 2008. The air temperature and humidity in the workplace were measured. Regarding workload, work hours, fluid loss, heart rate, and amount of activity [metabolic equivalents of task (METs)] of 7 and 8 male subjects pre- and post-reform, respectively, were measured. Job-related stress was assessed using a self-reporting anonymous questionnaire for 53 and 45 workers pre- and post-system change, respectively. After the reform and work system change, the kitchen space had increased and air-conditioners had been installed. The workplace environment changes included the introduction of temperature-controlled wagons whose operators were limited to male workers. The kitchen air temperature decreased, so fluid loss in the subjects decreased significantly. However, heart rate and METs in the subjects increased significantly. As for job-related stress, although workplace environment scores improved, male workers' total job stress score increased. These results suggest that not only the workplace environment but also the work system influenced the workload and job stress on workers.

  13. [Changes in workers' rehabilitation procedures under the Brazilian social security system: modernization or undermining of social protection?].

    Science.gov (United States)

    Takahashi, Mara Alice Batista Conti; Iguti, Aparecida Mari

    2008-11-01

    This article describes the changes in workers' rehabilitation practices under the Brazilian National Social Security Institute (INSS) in the 1990s, in the context of neoliberal economic adjustment measures, based on an analysis of INSS documents from 1992 to 1997. The INSS plan for "modernization" of workers' rehabilitation led to: (1) dismantling of multidisciplinary teams; (2) induction of workers to accept proportional retirement pensions and voluntary layoffs; (3) under-utilization of the remaining INSS professional staff; (4) elimination of treatment programs for workers' rehabilitation; and (5) dismantling of INSS rehabilitation centers and clinics. The changes in the Brazilian social security system undermined the county's social security project and hegemony and reduced social security reform to a mere management and fiscal issue. Current "rehabilitation" falls far short of the institution's original purpose of social protection for workers, while aiming at economic regulation of the system to contain costs of workers' benefits. Workers that suffer work-related accidents are denied occupational rehabilitation, which aggravates their social disadvantage when they return to work.

  14. Strong and Electromagnetic Interactions at SPS Energies

    CERN Document Server

    Ribicki, Andrzej

    2009-01-01

    Particle production in peripheral Pb+Pb collisions has been measured at a beam energy of 158 GeV per nucleon, corresponding to psNN 17.3 GeV. The measurements provide full double differential coverage in a wide range of longitudinal and transverse momenta, including the central (“mid-rapidity”) area and extending far into the projectile fragmentation region. The resulting analysis shows the heavy ion reaction as a mixture of different processes. In particular, surprising phenomena, like the presence of large and strongly varying structures in the shape of the double differential cross section d2s /dxFd pT , are induced by the final state electromagnetic interaction between produced particles and the charged spectator system. This effect is largest at low transverse momenta, where it results in a deep valley in the xF -dependence of the produced p+/p− ratio. The basic characteristics of the electromagnetic phenomenon described above agree with the results of a theoretical analysis, performed by means of ...

  15. How secure is your information system? An investigation into actual healthcare worker password practices.

    Science.gov (United States)

    Cazier, Joseph A; Medlin, B Dawn

    2006-09-27

    For most healthcare information systems, passwords are the first line of defense in keeping patient and administrative records private and secure. However, this defense is only as strong as the passwords employees chose to use. A weak or easily guessed password is like an open door to the medical records room, allowing unauthorized access to sensitive information. In this paper, we present the results of a study of actual healthcare workers' password practices. In general, the vast majority of these passwords have significant security problems on several dimensions. Implications for healthcare professionals are discussed.

  16. Development of education and training system for radiation workers with virtual reality technique

    International Nuclear Information System (INIS)

    Yamaguchi, Yoshiaki; Saito, Tadashi; Inoue, Kazuma

    2006-01-01

    A virtual reality education and training system was developed for radiation workers. The function of the system is designed as a scenario which is programmed with a proprietary script language capable of defining motion of objects created by three-dimensional (3D) modeling soft-ware, user interaction, sounds and text strings displayed in the scene. Combining these functions enables the system to provide lectures and to judge the user's action. The system consists of the 3D model of the radiation facilities and three modes of scenarios (guidance, training and end-of-course examination) including the procedure to enter and exit, experiment, measurement, radioactive waste classification and accidents. By combining these modes, the trainee of education and training is possible to learn safety handling and how to act in the case of fire or earthquake. (author)

  17. Effect of the Various Impedances on Longitudinal Beam Stability in the CERN SPS

    CERN Document Server

    Lasheen, Alexandre; Repond, Joël; Shaposhnikova, Elena

    2016-01-01

    The High Luminosity (HL)-LHC project at CERN aims at a luminosity increase by a factor ten and one of the necessary ingredients is doubling the bunch intensity to 2.4x10¹¹ ppb for beams with 25 ns bunch spacing. Many improvements are already foreseen in the frame of the LHC Injector Upgrade (LIU) project, but probably this intensity would still not be reachable in the SPS due to longitudinal instabilities. Recently a lot of effort went into finding the impedance sources of the instabilities. Particle simulations based on the latest SPS impedance model are now able to reproduce the measured instability thresholds and were used to determine the most critical impedance sources by removing them one by one from the model. It was found that impedance of vacuum flanges and of the already damped 630 MHz HOM of the main RF system gave for 72 bunches the comparable intensity thresholds. Possible intensity gains are defined for realistic impedance modifications and for various beam configurations (number of bunches, l...

  18. Non-local Fast Extraction from the CERN SPS at 100 and 440 GeV

    CERN Document Server

    Velotti, F M; Bartmann, W; Carlier, E; Cornelis, K; Efthymiopoulos, I; Goddard, B; Jensen, L K; Kain, V; Kowalska, M; Mertens, V; Steerenberg, R

    2013-01-01

    The Long Straight Section 2 (LSS2) of the CERN SPS is connected with the North Area (NA), to which the beam to date has always been extracted using a resonant extraction technique. For new proposed short- and long-baseline neutrino experiments, a fast single turn extraction to this experimental area is required. As there are no kickers in LSS2, and the integration of any new kickers with the existing electrostatic septum would be problematic, a solution has been developed to fast extract the beam using non-local extraction with other SPS kickers. Two different kicker systems have been used, the injection kicker in LSS1 and the stronger extraction kicker in LSS6 to extract 100 and 440 GeV beam, respectively. For both solutions a large emittance beam was extracted after 5 or 9 full betatron periods. The concept and simulation details are presented with the analysis of the aperture and beam loss considerations and experimental results collected during a series of beam tests.

  19. Candidate solar cell materials for photovoltaic conversion in a solar power satellite /SPS/

    Science.gov (United States)

    Glaser, P. E.; Almgren, D. W.

    1978-01-01

    In recognition of the obstacles to solar-generated baseload power on earth, proposals have been made to locate solar power satellites in geosynchronous earth orbit (GEO), where solar energy would be available 24 hours a day during most of the time of the year. In an SPS, the electricity produced by solar energy conversion will be fed to microwave generators forming part of a planar phase-array transmitting antenna. The antenna is designed to precisely direct a microwave beam of very low intensity to one or more receiving antennas at desired locations on earth. At the receiving antenna, the microwave energy will be safely and efficiently reconverted to electricity and then be transmitted to consumers. An SPS system will include a number of satellites in GEO. Attention is given to the photovoltaic option for solar energy conversion in GEO, solar cell requirements, the availability of materials, the implication of large production volumes, requirements for high-volume manufacture of solar cell arrays, and the effects of concentration ratio on solar cell array area.

  20. Development of a short form Social Interaction Anxiety (SIAS) and Social Phobia Scale (SPS) using nonparametric item response theory: the SIAS-6 and the SPS-6.

    Science.gov (United States)

    Peters, Lorna; Sunderland, Matthew; Andrews, Gavin; Rapee, Ronald M; Mattick, Richard P

    2012-03-01

    Shortened forms of the Social Interaction Anxiety Scale (SIAS) and the Social Phobia Scale (SPS) were developed using nonparametric item response theory methods. Using data from socially phobic participants enrolled in 5 treatment trials (N = 456), 2 six-item scales (the SIAS-6 and the SPS-6) were developed. The validity of the scores on the SIAS-6 and the SPS-6 was then tested using traditional methods for their convergent validity in an independent clinical sample and a student sample, as well as for their sensitivity to change and diagnostic sensitivity in the clinical sample. The scores on the SIAS-6 and the SPS-6 correlated as well as the scores on the original SIAS and SPS, with scores on measures of related constructs, discriminated well between those with and without a diagnosis of social phobia, providing cutoffs for diagnosis and were as sensitive to measuring change associated with treatment as were the SIAS and SPS. Together, the SIAS-6 and the SPS-6 appear to be an efficient method of measuring symptoms of social phobia and provide a brief screening tool.

  1. Performance of community health workers: situating their intermediary position within complex adaptive health systems.

    Science.gov (United States)

    Kok, Maryse C; Broerse, Jacqueline E W; Theobald, Sally; Ormel, Hermen; Dieleman, Marjolein; Taegtmeyer, Miriam

    2017-09-02

    Health systems are social institutions, in which health worker performance is shaped by transactional processes between different actors.This analytical assessment unravels the complex web of factors that influence the performance of community health workers (CHWs) in low- and middle-income countries. It examines their unique intermediary position between the communities they serve and actors in the health sector, and the complexity of the health systems in which they operate. The assessment combines evidence from the international literature on CHW programmes with research outcomes from the 5-year REACHOUT consortium, undertaking implementation research to improve CHW performance in six contexts (two in Asia and four in Africa). A conceptual framework on CHW performance, which explicitly conceptualizes the interface role of CHWs, is presented. Various categories of factors influencing CHW performance are distinguished in the framework: the context, the health system and intervention hardware and the health system and intervention software. Hardware elements of CHW interventions comprise the supervision systems, training, accountability and communication structures, incentives, supplies and logistics. Software elements relate to the ideas, interests, relationships, power, values and norms of the health system actors. They influence CHWs' feelings of connectedness, familiarity, self-fulfilment and serving the same goals and CHWs' perceptions of support received, respect, competence, honesty, fairness and recognition.The framework shines a spotlight on the need for programmes to pay more attention to ideas, interests, relationships, power, values and norms of CHWs, communities, health professionals and other actors in the health system, if CHW performance is to improve.

  2. Integration of community health workers into health systems in developing countries: Opportunities and challenges

    Directory of Open Access Journals (Sweden)

    Collins Otieno Asweto

    2016-02-01

    Full Text Available Background: Developing countries have the potential to reach vulnerable and underserved populations marginalized by the country’s health care systems by way of community health workers (CHWs. It is imperative that health care systems focus on improving access to quality continuous primary care through the use of CHWs while paying attention to the factors that impact on CHWs and their effectiveness. Objective: To explore the possible opportunities and challenges of integrating CHWs into the health care systems of developing countries. Methods: Six databases were examined for quantitative, qualitative, and mixed-methods studies that included the integration of CHWs, their motivation and supervision, and CHW policy making and implementation in developing countries. Thirty-three studies met the inclusion criteria and were double read to extract data relevant to the context of CHW programs. Thematic coding was conducted and evidence on the main categories of contextual factors influencing integration of CHWs into the health system was synthesized. Results: CHWs are an effective and appropriate element of a health care team and can assist in addressing health disparities and social determinants of health. Important facilitators of integration of CHWs into health care teams are support from other health workers and inclusion of CHWs in case management meetings. Sustainable integration of CHWs into the health care system requires the formulation and implementation of polices that support their work, as well as financial and nonfinancial incentives, motivation, collaborative and supportive supervision, and a manageable workload. Conclusions: For sustainable integration of CHWs into health care systems, high-performing health systems with sound governance, adequate financing, well-organized service delivery, and adequate supplies and equipment are essential. Similarly, competent communities could contribute to better CHW performance through sound

  3. Physics at the AD/PS/SPS (3/4)

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Lecture 3: Flavour and Neutrinos The CERN SPS provides kaon and neutrino beams which are unique in the world. The lecture will describe the flavour and neutrino research conducted with these beams. The flavour programme is centered around the study of kaons. It includes a broad spectrum of topics such as CP-Violation, the precise determination of quark-mixing parameters, lepton universality and very rare decays. The CNGS neutrino beam enables to perform long baseline neutrino oscillation experiments with unique features such as the tau lepton appearance.

  4. Beam Quality Preservation in the CERN PS-SPS Complex

    CERN Multimedia

    Arduini, Gianluigi

    2004-01-01

    The LHC will require beams of unprecedented transverse and longitudinal brightness. Their production imposes tight constraints on the emittance growth in each element of the LHC injector chain, namely the PS-SPS Accelerator Complex. The problems encountered at the different stages of the acceleration in the complex span a wide range of topics, such as injection matching, RF gymnastics, space charge, transverse and longitudinal single- and coupled-bunch instabilities, and electron cloud effects. The measurement techniques developed and applied to identify and study the various sources of emittance dilution to the high precision required for the LHC beams and the solutions found to control such phenomena are illustrated.

  5. Electrostatic septum for "Continuous Transfer" from PS to SPS

    CERN Multimedia

    CERN PhotoLab

    1982-01-01

    For "Continuous Transfer" to the SPS, the PS beam, after acceleration, is peeled off in 5 turns. To minimize losses, the magnetic septa are preceded by an electrostatic septum in straight section 31. We see the inner part of it, on a lab-bench. The first part consists of W-wires, the second part is a Mo-foil. The circulating beam passes through the opening, the ejected beam at the outside (above the wires, in this picture). This assembly is the anode-part, the cathode is not shown.

  6. Tilted bending magnet for SPS target area TCC2

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    A slow-extracted proton beam from the SPS goes to the underground target zone TCC2. The part of the primary beam which traverses target T4 is recuperated and transported over some 800 m, for further use in the North Area High Intensity facility (NAHIF). The curved and sloped trajectory required 4 of the bending magnets to be tilted. Here we see one of them being attended by Gilbert Françon in hall 867, ready for installation in TCC2.

  7. [Effects of extremely low frequency electromagnetic radiation on cardiovascular system of workers].

    Science.gov (United States)

    Zhao, Long-yu; Song, Chun-xiao; Yu, Duo; Liu, Xiao-liang; Guo, Jian-qiu; Wang, Chuan; Ding, Yuan-wei; Zhou, Hong-xia; Ma, Shu-mei; Liu, Xiao-dong; Liu, Xin

    2012-03-01

    To observe the exposure levels of extremely low frequency electromagnetic fields in workplaces and to analyze the effects of extremely low frequency electromagnetic radiation on cardiovascular system of occupationally exposed people. Intensity of electromagnetic fields in two workplaces (control and exposure groups) was detected with EFA-300 frequency electromagnetic field strength tester, and intensity of the noise was detected with AWA5610D integral sound level. The information of health physical indicators of 188 controls and 642 occupationally exposed workers was collected. Data were analyzed by SPSS17.0 statistic software. The intensity of electric fields and the magnetic fields in exposure groups was significantly higher than that in control group (P 0.05). The results of physical examination showed that the abnormal rates of HCY, ALT, AST, GGT, ECG in the exposure group were significantly higher than those in control group (P 0.05). Exposure to extremely low frequency electromagnetic radiation may have some effects on the cardiovascular system of workers.

  8. Alignment and girder position of MSE septa in the new LSS4 extraction channel of the SPS

    CERN Document Server

    Balhan, B; Rizzo, A; Weterings, W; CERN. Geneva. SPS and LHC Division

    2002-01-01

    For the extraction of the beam from the Super Proton Synchrotron (SPS) to ring 2 of the Large Hadron Collider (LHC) and the CERN Neutrino to Gran Sasso (CNGS)facility, a new fast-extraction system is being constructed in the long straight section LSS4 of the SPS. Besides extraction bumpers, enlarged aperture quadrupoles and extraction kicker magnets (MKE), six conventional DC septum magnets (MSE) are used. These magnets are mounted on a single rigid support girder, pre-aligned so as to follow the trajectory of the extracted beam and optimise the available aperture. The girder has been motorised in order to optimise the local SPS aperture during setting up, so as to avoid the risk of circulating beam impact on the septum coils. In this note, we briefly present the trajectory and apertures of the beam, we describe the calculations and methods that have been used to determine the magnet position on the girder, and finally we report on the details of the girder movement and alignment.

  9. LS1 Report: A highly choreographed ballet in the SPS

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    With only one short month left until beam, the SPS teams have been kept busy with powering and operations tests. Alongside this demanding work, they have also successfully removed and replaced four key elements of the accelerator.   Since beginning their hardware-testing phase in early July, teams have been carrying out Electrical Power Converter tests and a wide range of start-up tests for the various equipment groups. Slotted amongst this busy schedule of tests were the final checks of the accelerator's magnets and beam dump. "There are three main types of magnet faults and we found we had one of each: an electrical fault (short circuit) in the magnet, a water leak (as the magnets are water cooled) and a vacuum chamber leak," says David McFarlane, the SPS technical coordinator from the Engineering Department. "On top of that, there was a problem with the main beam dump, which meant it also had to be replaced. In the end, rather than stopping the tests for each...

  10. Electron cloud in the CERN accelerators (PS, SPS, LHC)

    International Nuclear Information System (INIS)

    Iadarola, G; Rumolo, G

    2013-01-01

    Several indicators have pointed to the presence of an Electron Cloud (EC) in some of the CERN accelerators, when operating with closely spaced bunched beams. In particular, spurious signals on the pick ups used for beam detection, pressure rise and beam instabilities were observed at the Proton Synchrotron (PS) during the last stage of preparation of the beams for the Large Hadron Collider (LHC), as well as at the Super Proton Synchrotron (SPS). Since the LHC has started operation in 2009, typical electron cloud phenomena have appeared also in this machine, when running with trains of closely packed bunches (i.e. with spacings below 150ns). Beside the above mentioned indicators, other typical signatures were seen in this machine (due to its operation mode and/or more refined detection possibilities), like heat load in the cold dipoles, bunch dependent emittance growth and degraded lifetime in store and bunch-by-bunch stable phase shift to compensate for the energy loss due to the electron cloud. An overview of the electron cloud status in the different CERN machines (PS, SPS, LHC) will be presented in this paper, with a special emphasis on the dangers for future operation with more intense beams and the necessary countermeasures to mitigate or suppress the effect. (author)

  11. The SHiP experiment at CERN SPS

    CERN Document Server

    Di Crescenzoon, A

    2016-01-01

    SHiP is a new general purpose fixed target facility, whose Technical Proposal has been recently submitted to the CERN SPS Committee. In its initial phase, the 400 GeV proton beam extracted from the SPS will be dumped on a heavy target with the aim of integrating 2 × 1020 pot in 5 years. A dedicated detector located downstream of the target, based on a long vacuum tank followed by a spectrometer and particle identification detectors, will allow probing a variety of models with light long-lived exotic particles and masses below a few GeV/c2. The beam dump is also an ideal source of tau neutrinos, the less known particle in the Standard Model. Another dedicated detector, based on the Emulsion Cloud Chamber technology already used in the OPERA experiment, will allow to perform for the first time measurements of the tau neutrino deep inelastic scattering cross section. Tau neutrinos will be distinguished from tau anti-neutrinos, thus providing the first observation of the tau anti-neutrino.

  12. Proposal to Search for Heavy Neutral Leptons at the SPS

    CERN Document Server

    Bonivento, W.; Dijkstra, H.; Egede, U.; Ferro-Luzzi, M.; Goddard, B.; Golutvin, A.; Gorbunov, D.; Jacobsson, R.; Panman, J.; Patel, M.; Ruchayskiy, O.; Ruf, T.; Serra, N.; Shaposhnikov, M.; Treille, D.; CERN. Geneva. SPS and PS Experiments Committee; SPSC

    2013-01-01

    A new fixed-target experiment at the CERN SPS accelerator is proposed that will use decays of charm mesons to search for Heavy Neutral Leptons (HNLs), which are right-handed partners of the Standard Model neutrinos. The existence of such particles is strongly motivated by theory, as they can simultaneously explain the baryon asymmetry of the Universe, account for the pattern of neutrino masses and oscillations and provide a Dark Matter candidate. Cosmological constraints on the properties of HNLs now indicate that the majority of the interesting parameter space for such particles was beyond the reach of the previous searches at the PS191, BEBC, CHARM, CCFR and NuTeV experiments. For HNLs with mass below 2 GeV, the proposed experiment will improve on the sensitivity of previous searches by four orders of magnitude and will cover a major fraction of the parameter space favoured by theoretical models. The experiment requires a 400 GeV proton beam from the SPS with a total of 2x10^20 protons on target, achie...

  13. The regulatory system of monitoring workers in Germany for intakes of radioactivity

    International Nuclear Information System (INIS)

    Dalheimer, A.; Henrichs, K.

    1996-01-01

    In Germany, the working group 'Incorporation Monitoring' of the German-Swiss Radiation Protection Association defined a new standard for the monitoring of workers occupationally exposed to radioactive material. During the last two years this draft has been accepted by the German government in the form of three guidelines. The purpose of the approach was the installation of a consistent state-of-the-art system: defining clear criteria for the necessity of routine and special monitoring programs, giving guidelines for monitoring programs ensuring that dose assessments are as reliable as necessary with the lowest possible expenses, standardizing as far as possible the procedures of dose assessments, and guaranteeing the necessary quality standards. The scientific basis of this regulatory system are the publications 30 and 54 of lCRP. (author)

  14. Value of a mobile information system to improve quality of care by community health workers

    Directory of Open Access Journals (Sweden)

    Mark Tomlinson

    2013-04-01

    Full Text Available Background: We will be unable to achieve sustained impact on health outcomes with community health worker (CHW-based interventions unless we bridge the gap between small scale efficacy studies and large scale interventions. Effective strategies to support the management of CHWs are central to bridging the gap. Mobile phones are broadly available, particularly in low and middle income countries (LAMIC, where the penetration rate approaches 100%. Objectives: In this article, we describe how mobile phones and may be combined with mobile web-based technology to assist in the management of CHWs in two projects in South Africa. Methods: This article is a descriptive study, drawing lessons from two randomised controlled trials outlining how a mobile phone information system can be utilised to enhance the quality of health interventions. We organised our comprehensive management and supervision system around a previously published management framework. The system is composed of mobile phones utilised by CHWs and a web-based interface utilised by CHW supervisors. Computerised algorithms were designed with intervention and assessment protocols to aid in the real-time supervision and management of CHWs. Results: Community health workers used mobile phones to initiate intervention visits and trigger content to be delivered during the course of intervention visits. Supervisors used the web-based interface for real-time monitoring of the location, timing and content of intervention visits. Additional real-time support was provided through direct support calls in the event of crises in the field. Conclusion: Mobile phone-based information system platforms offer significant opportunities to improve CHW-delivered interventions. The extent to which these efficiency gains can be translated into realised health gains for communities is yet to be tested.

  15. Value of a mobile information system to improve quality of care by community health workers

    Directory of Open Access Journals (Sweden)

    Mark Tomlinson

    2013-04-01

    Full Text Available Background: We will be unable to achieve sustained impact on health outcomes with community health worker (CHW-based interventions unless we bridge the gap between small scale efficacy studies and large scale interventions. Effective strategies to support the management of CHWs are central to bridging the gap. Mobile phones are broadly available, particularly in low and middle income countries (LAMIC, where the penetration rate approaches 100%.Objectives: In this article, we describe how mobile phones and may be combined with mobile web-based technology to assist in the management of CHWs in two projects in South Africa.Methods: This article is a descriptive study, drawing lessons from two randomised controlled trials outlining how a mobile phone information system can be utilised to enhance the quality of health interventions. We organised our comprehensive management and supervision system around a previously published management framework. The system is composed of mobile phones utilised by CHWs and a web-based interface utilised by CHW supervisors. Computerised algorithms were designed with intervention and assessment protocols to aid in the real-time supervision and management of CHWs.Results: Community health workers used mobile phones to initiate intervention visits and trigger content to be delivered during the course of intervention visits. Supervisors used the web-based interface for real-time monitoring of the location, timing and content of intervention visits. Additional real-time support was provided through direct support calls in the event of crises in the field.Conclusion: Mobile phone-based information system platforms offer significant opportunities to improve CHW-delivered interventions. The extent to which these efficiency gains can be translated into realised health gains for communities is yet to be tested.

  16. SU-F-SPS-02: Accuracy of the Small Field Dosimetry Using the Monte Carlo and Sequential Dose Calculation Algorithms of Multiplan Treatment Planning System Within and Beyond Heterogeneous Media for Cyberknife M6 Unit

    Energy Technology Data Exchange (ETDEWEB)

    Serin, E.; Codel, G.; Mabhouti, H.; Cebe, M.; Sanli, E.; Pacaci, P.; Kucuk, N.; Kucukmorkoc, E.; Doyuran, M.; Canoglu, D.; Altinok, A.; Acar, H.; Caglar Ozkok, H. [Medipol University, Istanbul, Istanbul (Turkey)

    2016-06-15

    Purpose: In small field geometries, the electronic equilibrium can be lost, making it challenging for the dose-calculation algorithm to accurately predict the dose, especially in the presence of tissue heterogeneities. In this study, dosimetric accuracy of Monte Carlo (MC) advanced dose calculation and sequential algorithms of Multiplan treatment planning system were investigated for small radiation fields incident on homogeneous and heterogeneous geometries. Methods: Small open fields of fixed cones of Cyberknife M6 unit 100 to 500 mm2 were used for this study. The fields were incident on in house phantom containing lung, air, and bone inhomogeneities and also homogeneous phantom. Using the same film batch, the net OD to dose calibration curve was obtained using CK with the 60 mm fixed cone by delivering 0- 800 cGy. Films were scanned 48 hours after irradiation using an Epson 1000XL flatbed scanner. The dosimetric accuracy of MC and sequential algorithms in the presence of the inhomogeneities was compared against EBT3 film dosimetry Results: Open field tests in a homogeneous phantom showed good agreement between two algorithms and film measurement For MC algorithm, the minimum gamma analysis passing rates between measured and calculated dose distributions were 99.7% and 98.3% for homogeneous and inhomogeneous fields in the case of lung and bone respectively. For sequential algorithm, the minimum gamma analysis passing rates were 98.9% and 92.5% for for homogeneous and inhomogeneous fields respectively for used all cone sizes. In the case of the air heterogeneity, the differences were larger for both calculation algorithms. Overall, when compared to measurement, the MC had better agreement than sequential algorithm. Conclusion: The Monte Carlo calculation algorithm in the Multiplan treatment planning system is an improvement over the existing sequential algorithm. Dose discrepancies were observed for in the presence of air inhomogeneities.

  17. SU-F-SPS-02: Accuracy of the Small Field Dosimetry Using the Monte Carlo and Sequential Dose Calculation Algorithms of Multiplan Treatment Planning System Within and Beyond Heterogeneous Media for Cyberknife M6 Unit

    International Nuclear Information System (INIS)

    Serin, E.; Codel, G.; Mabhouti, H.; Cebe, M.; Sanli, E.; Pacaci, P.; Kucuk, N.; Kucukmorkoc, E.; Doyuran, M.; Canoglu, D.; Altinok, A.; Acar, H.; Caglar Ozkok, H.

    2016-01-01

    Purpose: In small field geometries, the electronic equilibrium can be lost, making it challenging for the dose-calculation algorithm to accurately predict the dose, especially in the presence of tissue heterogeneities. In this study, dosimetric accuracy of Monte Carlo (MC) advanced dose calculation and sequential algorithms of Multiplan treatment planning system were investigated for small radiation fields incident on homogeneous and heterogeneous geometries. Methods: Small open fields of fixed cones of Cyberknife M6 unit 100 to 500 mm2 were used for this study. The fields were incident on in house phantom containing lung, air, and bone inhomogeneities and also homogeneous phantom. Using the same film batch, the net OD to dose calibration curve was obtained using CK with the 60 mm fixed cone by delivering 0- 800 cGy. Films were scanned 48 hours after irradiation using an Epson 1000XL flatbed scanner. The dosimetric accuracy of MC and sequential algorithms in the presence of the inhomogeneities was compared against EBT3 film dosimetry Results: Open field tests in a homogeneous phantom showed good agreement between two algorithms and film measurement For MC algorithm, the minimum gamma analysis passing rates between measured and calculated dose distributions were 99.7% and 98.3% for homogeneous and inhomogeneous fields in the case of lung and bone respectively. For sequential algorithm, the minimum gamma analysis passing rates were 98.9% and 92.5% for for homogeneous and inhomogeneous fields respectively for used all cone sizes. In the case of the air heterogeneity, the differences were larger for both calculation algorithms. Overall, when compared to measurement, the MC had better agreement than sequential algorithm. Conclusion: The Monte Carlo calculation algorithm in the Multiplan treatment planning system is an improvement over the existing sequential algorithm. Dose discrepancies were observed for in the presence of air inhomogeneities.

  18. Estimated routine radiation doses to transportation workers in alternative spent-fuel transportation systems

    International Nuclear Information System (INIS)

    Schneider, K.J.; Smith, R.I.; Daling, P.M.; Ross, W.A.; McNair, G.W.

    1988-01-01

    The federal system for the management of spent fuel and high-level radioactive waste includes the acceptance by the US Department of Energy (DOE) of the spent fuel or waste loaded in casks at the reactor or other waste generators, its transportation to a repository, and its handling and final emplacement in the repository. The DOE plans to implement a transportation system that is safe, secure, efficient, and cost-effective and will meet applicable regulatory safety and security requirements. The DOE commissioned the Pacific Northwest Laboratory (PNL) to develop estimates of the routine radiation doses that would result from the operation of a system postulated using current designs and practices. From that evaluation, PNL identified activities/operations that result in the higher fraction of doses, proposed conceptual alternatives that would effectively reduce such exposures, and evaluated the cost-effectiveness of such alternatives. The study is one of a series used in making overall system design and operational decisions in the development of the DOE's spent-fuel/high-level waste transportation system. This paper contains the highlights from the PNL study of the estimated radiation doses to the transportation workers in a postulated reference transportation system and potential alternatives to that system

  19. Measurements on the SPS 200 MHz Travelling Wave Cavity towards an Impedance Model

    CERN Document Server

    Roggen, Toon; Caspers, Fritz; Vollinger, Christine; CERN. Geneva. ATS Department

    2016-01-01

    This note discusses the contribution of the SPS 200 MHz TWC (Travelling Wave Cavity) to the SPS longitudinal impedance model. The measurement method and setup is briefly explained and a comparison with simulations is discussed for both the fundamental pass band (FPB) as well as the Higher Order Modes (HOMs). In addition a number of improvements to the measurement setup are discussed.

  20. Using Computer Simulation Method to Improve Throughput of Production Systems by Buffers and Workers Allocation

    Directory of Open Access Journals (Sweden)

    Kłos Sławomir

    2015-12-01

    Full Text Available This paper proposes the application of computer simulation methods to support decision making regarding intermediate buffer allocations in a series-parallel production line. The simulation model of the production system is based on a real example of a manufacturing company working in the automotive industry. Simulation experiments were conducted for different allocations of buffer capacities and different numbers of employees. The production system consists of three technological operations with intermediate buffers between each operation. The technological operations are carried out using machines and every machine can be operated by one worker. Multi-work in the production system is available (one operator operates several machines. On the basis of the simulation experiments, the relationship between system throughput, buffer allocation and the number of employees is analyzed. Increasing the buffer capacity results in an increase in the average product lifespan. Therefore, in the article a new index is proposed that includes the throughput of the manufacturing system and product life span. Simulation experiments were performed for different configurations of technological operations.

  1. Health workers' experiences of coping with the Ebola epidemic in Sierra Leone's health system: a qualitative study.

    Science.gov (United States)

    Raven, Joanna; Wurie, Haja; Witter, Sophie

    2018-04-05

    The 2014 Ebola Virus Disease epidemic evolved in alarming ways in Sierra Leone spreading to all districts. The country struggled to control it against a backdrop of a health system that was already over-burdened. Health workers play an important role during epidemics but there is limited research on how they cope during health epidemics in fragile states. This paper explores the challenges faced by health workers and their coping strategies during the Ebola outbreak in four districts - Bonthe, Kenema, Koinadugu and Western Area - of Sierra Leone. We used a qualitative study design: key informant interviews (n = 19) with members of the District Health Management Teams and local councils, health facility managers and international partners; and in depth interviews with health workers (n = 25) working in public health facilities and international health workers involved with the treatment of Ebola patients. There were several important coping strategies including those that drew upon existing mechanisms: being sustained by religion, a sense of serving their country and community, and peer and family support. Externally derived strategies included: training which built health worker confidence in providing care; provision of equipment to do their job safely; a social media platform which helped health workers deal with challenges; workshops that provided ways to deal with the stigma associated with being a health worker; and the risk allowance, which motivated staff to work in facilities and provided an additional income source. Supportive supervision, peer support networks and better use of communication technology should be pursued, alongside a programme for rebuilding trusting relations with community structures. The challenge is building these mechanisms into routine systems, pre-empting shocks, rather than waiting to respond belatedly to crises.

  2. Support system for welded part inspection using X-ray. Simplified inspection system which does not need skilled workers

    International Nuclear Information System (INIS)

    Suga, Yasuo

    1995-01-01

    X-ray radiography has the excellent ability for operation and recording, accordingly, it has been used widely in industrial fields, but for deciding the presence of defects and their kinds and shapes from X-ray films, skilled workers are required. Recently because of the shortage of skilled workers and the increase of inspection efficiency, the necessity of its automation increased. The images of the films of the X-ray inspection of welded part are photographed with a CCD camera, and these are taken in a personal computer as the image data, then image processing is applied to them, and defect images are extracted automatically. Further, the technique of displaying the images so that inspectors can recognize them easily is devised. These procedures were examined. The constitution of the system the way of thinking in developing the system, the acquiring of high contrast images, the emphasis of defect images, the elimination of noise the treatment of emphasizing nuclear defect images, the elimination of background and the extraction of defect images, the results of the processing and image display are reported. The order of processes, the kind of a filter used and so on can be changed according to the purpose, the kind of welding and the image quality of films. (K.I.)

  3. Assessment of thermal loads in the CERN SPS crab cavities cryomodule1

    Science.gov (United States)

    Carra, F.; Apeland, J.; Calaga, R.; Capatina, O.; Capelli, T.; Verdú-Andrés, S.; Zanoni, C.

    2017-07-01

    As a part of the HL-LHC upgrade, a cryomodule is designed to host two crab cavities for a first test with protons in the SPS machine. The evaluation of the cryomodule heat loads is essential to dimension the cryogenic infrastructure of the system. The current design features two cryogenic circuits. The first circuit adopts superfluid helium at 2 K to maintain the cavities in the superconducting state. The second circuit, based on helium gas at a temperature between 50 K and 70 K, is connected to the thermal screen, also serving as heat intercept for all the interfaces between the cold mass and the external environment. An overview of the heat loads to both circuits, and the combined numerical and analytical estimations, is presented. The heat load of each element is detailed for the static and dynamic scenarios, with considerations on the design choices for the thermal optimization of the most critical components.

  4. Optimizing of SPS pressed SrFe12O19 pellets from nano-powder

    DEFF Research Database (Denmark)

    Mortensen, Anna; Stingaciu, Marian; Christensen, Mogens

    2015-01-01

    direction giving a higher net magnetization. One challenge is to optimize the pressing conditions in order to maximize the remanence and thus the energy product. In present work the SrFe12O19 powder was made in an autoclave and was analysed by X-ray diffraction and Rietveld Refinement to determine particle...... size. The powder was pressed using Spark Plasma Syntering (SPS) system at different conditions in order to investigate how the pressing conditions influence the magnetic properties. It was found, that pressing at 950oC leads to a much better alignment than pellets pressed at room temperature....... Furthermore, ball milling seems to decrease the degree of alignment and thereby the magnetic remanence which leads to a lower energy product. The magnetization was characterized using Vibrating Sample Magnetometer. By applying an external magnetic field before pressing, the alignment is heightened...

  5. Status and plans of the ion program of NA61 at the CERN SPS

    CERN Document Server

    Grebieszkow, Katarzyna

    2012-01-01

    The NA61/SHINE at the CERN SPS is a new experiment to study hadron production in h+h, h+A and A+A interactions. The main goal of the NA61 ion program is to explore the phase diagram (T - mu_B) of strongly interacting matter. In particular, we plan to study the properties of the onset of deconfinement and to search for the signatures of the critical point. A two-dimensional scan of the phase diagram will be performed by varying the energy (13A-158A GeV) and system size (p+p, Be+Be, Ar+Ca, Xe+La) of collisions. This paper summarizes the status and plans of the NA61/SHINE ion program. In particular the detector upgrades, data taking schedule and the first results on spectra and correlations are discussed.

  6. Workers' involvement--a missing component in the implementation of occupational safety and health management systems in enterprises.

    Science.gov (United States)

    Podgórski, Daniel

    2005-01-01

    Effective implementation of occupational safety and health (OSH) legislation based on European Union directives requires promotion of OSH management systems (OSH MS). To this end, voluntary Polish standards (PN-N-18000) have been adopted, setting forth OSH MS specifications and guidelines. However, the number of enterprises implementing OSH MS has increased slowly, falling short of expectations, which call for a new national policy on OSH MS promotion. To develop a national policy in this area, a survey was conducted in 40 enterprises with OSH MS in place. The survey was aimed at identifying motivational factors underlying OSH MS implementation decisions. Specifically, workers' and their representatives' involvement in OSH MS implementation was investigated. The results showed that the level of workers' involvement was relatively low, which may result in a low effectiveness of those systems. The same result also applies to the involvement of workers' representatives and that of trade unions.

  7. Travelling Wave Structure of an SPS RF Cavity

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    The RF cavities for acceleration of particles in the SPS have a travelling-wave structure. They operate at a fixed frequency of 200 MHz (h = 4620). With a quality factor of Q = 100, the bandwidth covers the small frequency swing for the acceleration of protons from as low as 10 GeV to the top energy of 450 GeV. Later on, for the acceleration of ions, with a larger frequency swing, turn-to-turn phase jumps did the trick. Two cavities, each consisting of 5 tank sections, were installed in long straight section 3. Each cavity is driven by a power amplifier of 750 kW CW (1 MW pulsed). Another 2 cavities were added later on. See also 7411033 and 7802190.

  8. Transverse studies with ions at SPS flat bottom

    CERN Document Server

    Antoniou, F; Saa Hernandez, A; Huschauer, A

    2017-01-01

    The LHC injectors upgrade project (LIU) aims at con-solidating and upgrading the existing accelerator chain atCERN in view of the increased beam performance requiredfor the High Luminosity LHC (HL-LHC) project. For theion chain, the losses and emittance growth in the SPS imposepresently the main performance limitation. The significantbeam degradation encountered on the long injection plateauhas been studied during the 2016 MD runs with Pb82+. Inthis report we present the systematic measurements of emit-tance, bunch length and transmission performed along theinjection plateau for different bunch intensities. We present,as well, static and dynamic tune scans for the optimizationof the working point and measurement of the loss rate atcloseby resonances.

  9. New Working Conditions for the SPS from 2000

    CERN Document Server

    Nonis, M

    2000-01-01

    After the long shutdown (December 2000 to May 2001), the SPS complex will work with the main water-cooling loop in closed circuit. This will affect the working conditions because of the higher temperature of the supplied water (24 ° C, i.e. 15 K higher) and therefore of the air in the tunnel. The cooling installations will consequently be upgraded or replaced to meet the new needs, and several new chilled-water stations will be installed to supply the present users. The author will thoroughly explain the main aspects of all these modifications and report the results of the preliminary tests carried out in September 1996. Finally, an overview of the global costs (operational and linked to the project) will be given, taking into account the different consumption of water, electricity and the effects on the magnet components.

  10. Studying the influence of vibration exposures on digestives system of workers in a food processing company

    Directory of Open Access Journals (Sweden)

    2012-12-01

    Full Text Available Introduction: Today’s, defective and faulty equipments lose a large part of them energy as noise and vibration which beside their financial costs can be hazardous to the health of people. Vibration as a physical agent can cause an adverse health effect on human to nervous system. These effects, based on body region can be as specific or general systems. Digestion system has a natural vibration of 3-8Hz frequency. When the digestive system is exposed by such vibration, it can make impairment on that system. This study aimed to study vibration effect on digestion irregularities. . Material and Method: This was a retrospective case-control study conducted in a food industry. The number of 103 workers digestive problem and 431 healthy workers were selected as population study. Exposure to the vibration in the different parts were measured. People with more than 100 dB was considered exposed group. Then, after determining the number of exposed and non exposed groups, data were analyzed using statistical methodologies. .Result: The acceleration level of vibration was 109.8 dB in the packing section, which was less than standard limit (118.8 dB. Study population had a managed of 24-57 years old with 4-15 years of job tenure. In 59.2% of case comparing to 22.7% of control group were exposed to the vibration. The odds ratio (OR of prevalence rate of digestive problem among exposed group was 6.3 times more than non exposed group people, in risk of gastrointestinal complications. .Conclusion: Beside of the other risk factors of digestive problem, vibration can be also an effective cause of adverse health problem: Even by lower level of digestive problem can be seen in the exposed people. So, we suggest in the workplace with vibration risk factor, a digestive health exam be take general medical beside periodic examination. Moreover, it is recommended that researches related to the vibration is widely developed and the vibration standard limits is revised

  11. 76 FR 32227 - DST Systems, Inc., Including On-Site Leased Workers From Comsys Information Technology Services...

    Science.gov (United States)

    2011-06-03

    ..., Inc., Including On-Site Leased Workers From Comsys Information Technology Services, Megaforce, and Kelly Services Kansas City, MO; DST Technologies, a Wholly Owned Subsidiary of DST Systems, Inc., Boston... Information Technology Services, Megaforce, and Kelly Services, Kansas City, Missouri (subject firm). The...

  12. 75 FR 34172 - Rexam Closure Systems, Inc., a Subsidiary of Rexam PLC, Including On-Site Leased Workers From...

    Science.gov (United States)

    2010-06-16

    ... Illinois Manufacturing, Hamlet, NC; Amended Certification Regarding Eligibility To Apply for Worker... PLC, Hamlet, North Carolina. The notice was published in the Federal Register on April 23, 2010 (75 FR... at the Hamlet, North Carolina location of Rexam Closure Systems, Inc., a subsidiary of Rexam PLC. The...

  13. Experience of Forming Professional and Communicative Competency of Future Social Workers in Education Systems of Western European Countries

    Science.gov (United States)

    Baranyuk, Vita

    2015-01-01

    The article analyzes the experience of forming professional and communicative competency of future social workers in the education systems of Western European countries, in particular, France, Germany and Switzerland. On the basis of generalization of the studied data it has been found out that each country has its own techniques of forming…

  14. Worker Entrepreneurship.

    Science.gov (United States)

    Doucouliagos, Chris

    1992-01-01

    Evaluates the experience of worker entrepreneurship, highlighting successes and failures in Europe, and analyzes the relative importance of factors to worker entrepreneurship such as access to finance, education and training, organizational culture, and worker risk taking. (JOW)

  15. Radiological protection of workers. The IRSN proposes new functionalities to the users of the national information system for the radiological follow-up of workers exposed to ionizing radiations (SISERI)

    International Nuclear Information System (INIS)

    Portes, Pascale

    2014-01-01

    After a brief definition of the SISERI (national information system for the radiological follow-up of workers exposed to ionizing radiations) and of its new arrangements introduced in 2014, this document outlines that the radiological follow-up of workers is one of the national missions of the IRSN in different ways: risk prevention (regulatory support, certification, workstation studies), individual control of workers exposed to ionizing radiations (internal and external dosimetry), follow-up of all exposed workers (SISERI, annual assessment, follow-up of incidents and events), expertise in case of anomalies or crisis, sharing of knowledge and know-how. It describes the traceability of the individual dosimetric follow-up of workers exposed to ionizing radiations in France (regulatory requirement, centralization of data). It comments the evolutions introduced in 2014 in the modalities of follow-up of worker exposure: publication of a new order, evolution of the SISERI information system with new functionalities, totally dematerialised signature of the access protocol, pages of the SISERI specifically dedicated to the CSE (SISERI correspondent of the employer), a sheet of medical follow-up, access rights for the competent radiological protection person. It gives an overview of regulation on worker control: present context with threshold exposure values, past evolution, follow-up principles. A diagram indicates these evolutions (dates of orders, concerned personnel, and dose thresholds)

  16. Biodegradation test of SPS-LS blends as polymer electrolyte membrane fuel cells

    International Nuclear Information System (INIS)

    Putri, Zufira; Arcana, I Made

    2014-01-01

    Sulfonated polystyrene (SPS) can be applied as a proton exchange membrane fuel cell due to its fairly good chemical stability. In order to be applied as polymer electrolyte membrane fuel cells (PEMFCs), membrane polymer should have a good ionic conductivity, high proton conductivity, and high mechanical strength. Lignosulfonate (LS) is a complex biopolymer which has crosslinks and sulfonate groups. SPS-LS blends with addition of SiO 2 are used to increase the proton conductivity and to improve the mechanical properties and thermal stability. However, the biodegradation test of SPS-LS blends is required to determine whether the application of these membranes to be applied as an environmentally friendly membrane. In this study, had been done the synthesis of SPS, biodegradability test of SPS-LS blends with variations of LS and SiO 2 compositions. The biodegradation test was carried out in solid medium of Luria Bertani (LB) with an activated sludge used as a source of microorganism at incubation temperature of 37°C. Based on the results obtained indicated that SPS-LS-SiO 2 blends are more decomposed by microorganism than SPS-LS blends. This result is supported by analysis of weight reduction percentage, functional groups with Fourier Transform Infrared (FTIR) Spectroscopy, and morphological surface with Scanning Electron Microscopy (SEM)

  17. Biodegradation test of SPS-LS blends as polymer electrolyte membrane fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Putri, Zufira, E-mail: zufira.putri@gmail.com, E-mail: arcana@chem.itb.ac.id; Arcana, I Made, E-mail: zufira.putri@gmail.com, E-mail: arcana@chem.itb.ac.id [Inorganic and Physical Chemistry Research Groups, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Bandung (Indonesia)

    2014-03-24

    Sulfonated polystyrene (SPS) can be applied as a proton exchange membrane fuel cell due to its fairly good chemical stability. In order to be applied as polymer electrolyte membrane fuel cells (PEMFCs), membrane polymer should have a good ionic conductivity, high proton conductivity, and high mechanical strength. Lignosulfonate (LS) is a complex biopolymer which has crosslinks and sulfonate groups. SPS-LS blends with addition of SiO{sub 2} are used to increase the proton conductivity and to improve the mechanical properties and thermal stability. However, the biodegradation test of SPS-LS blends is required to determine whether the application of these membranes to be applied as an environmentally friendly membrane. In this study, had been done the synthesis of SPS, biodegradability test of SPS-LS blends with variations of LS and SiO{sub 2} compositions. The biodegradation test was carried out in solid medium of Luria Bertani (LB) with an activated sludge used as a source of microorganism at incubation temperature of 37°C. Based on the results obtained indicated that SPS-LS-SiO{sub 2} blends are more decomposed by microorganism than SPS-LS blends. This result is supported by analysis of weight reduction percentage, functional groups with Fourier Transform Infrared (FTIR) Spectroscopy, and morphological surface with Scanning Electron Microscopy (SEM)

  18. Arabidopsis thaliana sucrose phosphate synthase (sps) genes are expressed differentially in organs and tissues, and their transcription is regulated by osmotic stress.

    Science.gov (United States)

    Solís-Guzmán, María Gloria; Argüello-Astorga, Gerardo; López-Bucio, José; Ruiz-Herrera, León Francisco; López-Meza, Joel Edmundo; Sánchez-Calderón, Lenin; Carreón-Abud, Yazmín; Martínez-Trujillo, Miguel

    2017-11-01

    Sucrose is synthesized from UDP-Glc and Fru-6-phosphate via the activity of sucrose-phosphate synthase (SPS) enzymes, which produce Suc-6-phosphate. Suc-6-phosphate is rapidly dephosphorylated by phosphatases to produce Suc and inorganic phosphate. Arabidopsis has four sps genes encoding SPS enzymes. Of these enzymes, AtSPS1F and AtSPS2F have been grouped with other dicotyledonous SPS enzymes, while AtSPS3F and AtSPS4F are included in groups with both dicotyledonous and monocotyledonous SPS enzymes. In this work, we generated Arabidopsis thaliana transformants containing the promoter region of each sps gene fused to gfp::uidA reporter genes. A detailed characterization of expression conferred by the sps promoters in organs and tissues was performed. We observed expression of AtSPS1F, AtSPS2F and AtSPS3F in the columella roots of the plants that support sucrose synthesis. Hence, these findings support the idea that sucrose synthesis occurs in the columella cells, and suggests that sucrose has a role in this tissue. In addition, the expression of AtSPS4F was identified in embryos and suggests its participation in this developmental stage. Quantitative transcriptional analysis of A. thaliana plants grown in media with different osmotic potential showed that AtSPS2F and AtSPS4F respond to osmotic stress. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. The extant shore platform stromatolite (SPS facies association: a glimpse into the Archean?

    Directory of Open Access Journals (Sweden)

    A. Smith

    2018-04-01

    Full Text Available Shore platform stromatolites (SPS were first noted at Cape Morgan on the south-east African seaboard. Since then they have been found growing discontinuously in rocky peritidal zones along the entire southern African seaboard. They have also been found on the southwest Australian coast, at Giant's Causeway in Northern Ireland, and more recently at Harris on the Scottish Hebridean Atlantic coast. In this paper SPS occurrence and SPS potential as analogues for Precambrian fossil stromatolites, as well as potential stromatolite occurrences in shore platform regions on Mars, are assessed. Sub-horizontal surfaces promote stromatolite development, while tufa develops on cliffs and steep rocky surfaces. Tufa and stromatolites are end members of a spectrum dictated by coastal topography. Extant SPS occur on well indurated shore platforms in high wave energy settings, often around or near headlands. They can be associated with boulder beaches, boulder ridges, storm swash terraces, coastal dunes, and peat bogs. In contrast to other extant stromatolites, SPS are produced primarily by mineral precipitation, although minor trapping and binding stromatolites do occur. From a geological perspective, SPS develop in mildly transgressive siliciclastic settings in various climatic and tidal regimes. We suggest that SPS could be preserved in the geological record as micritic lenses on palaeo-shore platform surfaces. SPS share many features with Precambrian stromatolites and are a valid modern analogue despite the widely different atmospheric and oceanic conditions of the Archean. We suggest that terraces associated with former oceanic or lacustrine flooding surfaces on Mars are potential targets in the search for palaeo-SPS on Mars.

  20. Increased occupational coal dust toxicity in blood of central heating system workers.

    Science.gov (United States)

    Tuluce, Yasin; Ozkol, Halil; Koyuncu, Ismail; Ine, Hatice

    2011-02-01

    Coal dust causes lung diseases in occupational exposure. Reactive oxygen species have been implicated in the pathogenesis of its toxicity. In this study, serum enzymes, lipid profile and other biochemical values with oxidant/antioxidant status in whole blood and serum of central heating system workers (CHSW; the persons responsible for heating the apartment with coal) were determined to reflect the cell injury. Blood samples were obtained from CHSW (n = 25) and healthy individuals (n = 25). All values were measured in whole blood and serum. ANOVA was used for the estimation of statistical data. In the group of CHSW, creatinine, ferritin, alanin aminotransferase, aspartate aminotransferase, creatine phosphokinase, gamma glutamyl transferase, lactate dehydrogenase and glutathione reductase activities as well as triglyceride, very low density lipoprotein, protein carbonyl and malondialdehide were significantly higher, while transferrin, high density lipoprotein and catalase (CAT) activities were lower than the group of healthy individuals. This result is consistent with hypothesis that respirable coal dust generates lipid and protein oxidation and induces leakage of serum enzymes by cell damage. It also leads to imbalance in antioxidant defense system, lipid profile and other biochemical parameters.

  1. J/$\\psi$ production in proton-nucleus and nucleus-nucleus interactions at the CERN SPS

    CERN Document Server

    Abreu, M C; Alexa, C; Arnaldi, R; Ataian, M R; Baglin, C; Baldit, A; Bedjidian, Marc; Beolè, S; Boldea, V; Bordalo, P; Borges, G; Bussière, A; Capelli, L; Castanier, C; Castor, J I; Chaurand, B; Chevrot, I; Cheynis, B; Chiavassa, E; Cicalò, C; Claudino, T; Comets, M P; Constans, N; Constantinescu, S; Cortese, P; De Falco, A; De Marco, N; Dellacasa, G; Devaux, A; Dita, S; Drapier, O; Ducroux, L; Espagnon, B; Fargeix, J; Force, P; Gallio, M; Gavrilov, Yu K; Gerschel, C; Giubellino, P; Golubeva, M B; Gonin, M; Grigorian, A A; Grossiord, J Y; Guber, F F; Guichard, A; Gulkanian, H R; Hakobyan, R S; Haroutunian, R; Idzik, M; Jouan, D; Karavitcheva, T L; Kluberg, L; Kurepin, A B; Le Bornec, Y; Lourenço, C; Macciotta, P; MacCormick, M; Marzari-Chiesa, A; Masera, M; Masoni, A; Monteno, M; Musso, A; Petiau, P; Piccotti, A; Pizzi, J R; Prado da Silva, W L; Prino, F; Puddu, G; Quintans, C; Ramello, L; Ramos, S; Rato-Mendes, P; Riccati, L; Romana, A; Santos, H; Saturnini, P; Scalas, E; Scomparin, E; Serci, S; Shahoyan, R; Sigaudo, F; Silva, S; Sitta, M; Sonderegger, P; Tarrago, X; Topilskaya, N S; Usai, G L; Vercellin, Ermanno; Villatte, L; Willis, N

    2002-01-01

    The NA38 and NA50 experiments at the CERN SPS have measured charmonium production in different colliding systems with the aim of observing a phase transition from ordinary hadronic matter towards a state in which quarks and gluons are deconfined (quark-gluon plasma, QGP). This experimental research is based on the prediction that the J/ psi yield should be suppressed in deconfined matter. The analysis of the data collected by the NA50 experiment with Pb-Pb collisions at 158 GeV/c per nucleon shows that the J/ psi is anomalously suppressed with respect to the pattern observed in proton-nucleus and light ion reactions. (9 refs).

  2. Characterization of alternative electric generation technologies for the SPS comparative assessment: volume 2, central-station technologies

    International Nuclear Information System (INIS)

    1980-08-01

    The SPS Concept Development and Evaluation Program includes a comparative assessment. An early first step in the assessment process is the selection and characterization of alternative technologies. This document describes the cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives: (1) conventional coal-fired powerplant; (2) conventional light water reactor (LWR); (3) combined cycle powerplant with low-Btu gasifiers; (4) liquid metal fast breeder reactor (LMFBR); (5) photovoltaic system without storage; and (6) fusion reactor

  3. SU-E-T-241: Design and Implement of An Information Management System for Radiation Workers in a Hospital

    International Nuclear Information System (INIS)

    Wu, Q; Wu, M

    2015-01-01

    Purpose: To meet the special needs of Medical Administration Division, an information management system for radiation workers in a hospital(IMSRWH) has been developed. Methods: There are about 200 radiation workers in 20 departments, such as department of radiology, department of radiation oncology, department of nuclear medicine, and so on. An IMSRWH server was used to run a database and web service of Apache+PHP+MySQL. The IMSRWH web service could be accessed with Internet Explorer(IE) to input, search, count, and print the radiation workers’ data. Every worker’s data information includes the following tables: registration, personal dose monitoring records, personnel certificate, training certificate, personnel license, medical examination, etc, and each table includes more optional detail information. Results: In the past year, the IMSRWH has been successfully developed and implemented in the hospital. According to the needs, the user rights are divided into: the system administrator, office manager, department manager and radiation worker. The different users have the different interfaces, and the appropriate authority permissions mean corresponding operations. The administrator and office manager could manage all personnel information, department manager could manage the staff information of his department, and the workers could view or modify their own information. Because information updates, involving hundreds of each entry and modification are complicated, each table information of all workers can be batch import from or export to a Microsoft Excel CSV format file, to update all together. However, it has only Chinese version now. Conclusion: It was demonstrated to be user-friendly and was proven to significantly improve the efficiency of the hospital management. Since it is an in-house developed system, more functions can be added or modified to further enhance its potentials in research and clinical practice

  4. SU-E-T-241: Design and Implement of An Information Management System for Radiation Workers in a Hospital

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Q; Wu, M [Beijing Hospital, Beijing (China)

    2015-06-15

    Purpose: To meet the special needs of Medical Administration Division, an information management system for radiation workers in a hospital(IMSRWH) has been developed. Methods: There are about 200 radiation workers in 20 departments, such as department of radiology, department of radiation oncology, department of nuclear medicine, and so on. An IMSRWH server was used to run a database and web service of Apache+PHP+MySQL. The IMSRWH web service could be accessed with Internet Explorer(IE) to input, search, count, and print the radiation workers’ data. Every worker’s data information includes the following tables: registration, personal dose monitoring records, personnel certificate, training certificate, personnel license, medical examination, etc, and each table includes more optional detail information. Results: In the past year, the IMSRWH has been successfully developed and implemented in the hospital. According to the needs, the user rights are divided into: the system administrator, office manager, department manager and radiation worker. The different users have the different interfaces, and the appropriate authority permissions mean corresponding operations. The administrator and office manager could manage all personnel information, department manager could manage the staff information of his department, and the workers could view or modify their own information. Because information updates, involving hundreds of each entry and modification are complicated, each table information of all workers can be batch import from or export to a Microsoft Excel CSV format file, to update all together. However, it has only Chinese version now. Conclusion: It was demonstrated to be user-friendly and was proven to significantly improve the efficiency of the hospital management. Since it is an in-house developed system, more functions can be added or modified to further enhance its potentials in research and clinical practice.

  5. Career Anchors of United States Air Force Information Systems Workers: A Turnover Predictor

    National Research Council Canada - National Science Library

    Wynne, Lee

    2002-01-01

    ...) and the work of Schein (1987) to measure the career anchors, job satisfaction, and turnover intention of AF IS workers to determine if those whose job type and career anchor match report higher satisfaction and lower turnover...

  6. The Legal System and Alzheimer's Disease: Social Workers and Lawyers' Perceptions and Experiences.

    Science.gov (United States)

    Werner, Perla; Doron, Israel Issi

    2016-01-01

    The expected increase in the number of people living with Alzheimer's disease (AD) worldwide will be accompanied by an increase in the number of cases involving persons with AD brought up to the courts. This study examined the perceptions and experiences of social workers and lawyers regarding these cases. Three focus groups including social workers and lawyers (n = 26) were conducted. Two main themes were raised by the participants: (a) the role of social workers and lawyers in court cases regarding AD, and (b) the need for improving legal encounters involving persons with AD. Similarities and differences were found in both professionals' interpretations of these shared themes. Results of this study emphasize the need for increasing the knowledge and interprofessional training provided to social workers and lawyers involved in legal cases dealing with issues involving persons with Alzheimer's disease.

  7. SPS Injection and Beam Quality for LHC Heavy Ions With 150 ns Kicker Rise Time

    CERN Document Server

    Goddard, Brennan; Ducimetière, Laurent; Kotzian, Gerd; Uythoven, Jan; Velotti, Francesco

    2016-01-01

    As part of the LHC Injectors Upgrade project for LHC heavy ions, the SPS injection kicker system rise time needs reduction below its present 225 ns. One technically challenging option under consideration is the addition of fast Pulse Forming Lines in parallel to the existing Pulse Forming Networks for the 12 kicker magnets MKP-S, targeting a system field rise time of 100 ns. An alternative option is to optimise the system to approach the existing individual magnet field rise time (2-98%) of 150 ns. This would still significantly increase the number of colliding bunches in LHC while minimising the cost and effort of the system upgrade. The observed characteristics of the present system are described, compared to the expected system rise time, together with results of simulations and measurements with 175 and 150 ns injection batch spacing. The expected beam quality at injection into LHC is quantified, with the emittance growth and simulated tail population taking into account expected jitter and synchronisatio...

  8. An Electronic Worker Service System of the Pig House Based on ATmega16

    Science.gov (United States)

    Li, Liu-An; Jin, Tian-Ming; Yu, Ya-Ping; Zhang, Guo-Qiang; Hong, Tao

    Pork is very important for people in daily life. Quality of livestock environment is closely related to the growth of animals. To improve environmental quality, the paper designed an electronic worker service system of the pig house based on ATmega16, which consisted of 6 detection modules, wireless data collecting, GSM, time circuit, display, anti-th alarm and music player, etc. A small LAN was constructed by wireless transceiver module to test and collect data of temperature, humidity and harmful gas concentration in the pig house. If one detection point exists that harmful pollutant gases concentration exceeds the standard value, GSM module took a message for livestock farmers, so that farmers can promptly arrive at the pig house to ventilate or deal with manure in the pig house, which can effectively prevent from bad things. Time of pyroelectric detector deployment can be freely set, and intrusion information was timely sent to the users. The anti-th alarm function was achieved by the auxiliary light. The music playing module is open by timer module in order to soothing pigs' life state. All are suitable for small farms and can save human resources.

  9. Effectiveness of an electronic hand hygiene monitoring system on healthcare workers' compliance to guidelines.

    Science.gov (United States)

    Al Salman, J M; Hani, S; de Marcellis-Warin, N; Isa, Sister Fatima

    2015-01-01

    Hand hygiene is a growing concern among populations and is a crucial element in ensuring patient safety in a healthcare environment. Numerous management efforts have been conducted in that regard, including education, awareness and observations. To better evaluate the possible impact of technology on a healthcare setting, we observed the impact of a particular niche technology developed as an answer to the growing hand hygiene concerns. A study was conducted at Salmaniya Medical Complex (SMC) in Bahrain on a total of 16 Coronary Care Unit (CCU) beds where the system was installed, and the hand hygiene activity of healthcare workers (HCWs) in this area was monitored for a total period of 28 days. Comments, remarks and suggestions were noted, and improvements were made to the technology during the course of the trial. While resistance to change was significant, overall results were satisfactory. Compliance with hand hygiene techniques went from 38-42% to 60% at the beginning of the trial and then increased to an average of 75% at the end of the 28-day trial. In some cases, compliance peaked at 85% or even at 100%. Our case study demonstrates that technology can be used effectively in promoting and improving hand hygiene compliance in hospitals, which is one way to prevent cross-infections, especially in critical care areas. Copyright © 2014 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

  10. Comparative studies on mechanical properties of WC-Co composites sintered by SPS and conventional techniques

    Directory of Open Access Journals (Sweden)

    Pristinskiy Yuri

    2017-01-01

    Full Text Available Spark plasma sintering (SPS is an extremely fast solidification technique for compounds that are difficult to sinter within the material group metals, ceramics, or composites thereof, SPS uses a uniaxial pressure and a very rapid heating cycle to consolidate these materials. With SPS the main benefit is the ability to control the WC grain size due to the short sintering times at high temperature. Additionally, its allows to avoid negative reactions between WC and cobalt and to minimize the formation of undesirable phases in sintered composites. The WC-6wt.% Co cermet prepared by SPS processing achieves the enhanced mechanical properties with the hardness of 18.3 GPa and the fracture toughness of 15.5 MPa·m1/2 in comparison to standard reference tungsten carbide/cobalt material.

  11. SPS-ALPHA: The First Practical Solar Power Satellite via Arbitrarily Large PHased Array

    Data.gov (United States)

    National Aeronautics and Space Administration — SPS-ALPHA (Solar Power Satellite via Arbitrarily Large Phased Array) is a novel, bio-mimetic approach to the challenge of space solar power. If successful, this...

  12. The SPS Target Station for CHORUS and NOMAD Neutrino Experiments

    CERN Document Server

    Péraire, S; Zazula, J M

    1996-01-01

    A new SPS target station, T9, has been constructed for the CHORUS and NOMAD neutrino experiments at CERN. The heart of the station is the target box : 11 beryllium rods are aligned in a cast aluminium box ; they are cooled by a closed circuit helium gas with adjusted flow to each rod. The box is motorised horizontally and vertically at both ends, to remotely optimise the secondary particle production by aligning the target with the incident proton beam. Radiation protection around the station is guaranteed by more than 100 tons of shielding material (iron, copper, marble). This presentation describes briefly the various components of the target station ; it emphasises particularly the thermal and mechanical calculations which define a safe maximum beam intensity on the beryllium rods. Over the first two years of successful operation, the station has received more than 2€1019 protons at 450 GeV/c, with intensity peaks of 2.8€1013 protons per machine cycle.

  13. Search for Heavy Neutral Leptons at the SPS

    CERN Document Server

    Jacobsson, R

    2013-01-01

    A minimal extension of the Standard Model with three right-handed singlet Majorana leptons with masses below the Fermi scale (vMSM) allows incorporating a mechanism to generate the baryon asymmetry of the Universe, account for the pattern of small neutrino masses and oscillations, and potentially provide a Dark Matter candidate. This avoids introducing new energy scales between the Fermi scale and the Planck scale, the lack of which has also been shown to be compatible with the mass of the recently discovered Higgs boson. Considerations based on cosmological constraints and based on the data on neutrino oscillations favour a range of masses and couplings for these new heavy neutral leptons (HNL) which is largely accessible to experimental verification or falsification. This paper outlines a proposal for a new fixed-target experiment at the CERN SPS to search for the HNLs, together with an introduction to the theoretical motivation, a description of the experimental setup with the associated beam line and det...

  14. Hadroproduction of charmonium Χ states at the SPS

    International Nuclear Information System (INIS)

    Lemoigne, Y.

    1988-06-01

    The observation of hadroproduced charmonium Χ states requires a good resolution to disentangle states of similar masses (45 MeV of difference for masses larger than 3500 MeV). The WA11 experiment was able to distinguish the two Χ(3510) and Χ(3555) states, measure their cross-section in π-beryllium at 185 GeV/c and give a ratio of contribution of this to J/Ψ production (17.7 % and 12.8 % respectively). A refined analysis of Χ-states events has shown different processes in the π-production of these states. At 185 GeV/c, the Χ(3555) comes mainly from gluon-gluon fusion, but the Χ(3510) is equally produced by quark-antiquark fusion and gluon-gluon fusion. One finds that different graphs can be envisaged, both in colour conservation as well as in colour evaporation, to contribute to charmonium state production given by simple counting rules. Using our data at 185 GeV/c and the usual structure function (like the DUKE-OWEN's ones), we are able to compute the J/Ψ, Χ 1 , and Χ 2 π-production at any other SPS energy. This calculation gives values in agreement with results from the Ω group (for J/Ψ) and the ''GAMS'' group (for Χ), at 40 GeV/c [fr

  15. IMPROVEMENT OF THE CERN SPS ELECTROSTATIC SEPTA ION TRAPS

    CERN Multimedia

    Balhan, Bruno; Barlow, Roger Andrew; Raffaele, Graziano

    2016-01-01

    At CERN, the SPS synchrotron is equipped with a slow extraction channel towards the fixed target beam lines in the North Area This channel includes five consecutive electrostatic septa, where the field free region and the active high field region are separated by an array of tungsten-rhenium wires. The field-free region provides for the circulating beam, while the high field region is used to deflect the extracted beam. Since the residual gas can be ionized by the orbiting beam, low energy ions could cross the wire array and enter the high field region and cause high voltage breakdown when accelerated onto the cathode. To prevent low energy ions from entering this high electric field region, a vertical field is applied to the orbiting beam using so-called ‘ion traps’ for active protection. The vertical field is created by electrodes placed inside the region containing the circulating beam. Due to electromagnetic coupling onto the ion trap electrodes observed with the high frequency LHC beam (25 ns spaced ...

  16. EVALUATION OF THE WORKING ABILITY OF THE WORKERS SUFFERING FROM A CARDIOVASCULAR SYSTEM DISEASE

    Directory of Open Access Journals (Sweden)

    Jovica Jovanović

    2000-11-01

    Full Text Available The working ability evaluation is a process of numerous examinations, measurements and estimates that are done by a team of medical and other experts. It is utterly unacceptable to think that the opinion about someone's working ability is given by some individual specialist of any expert domain especially regarding the invalids' category since this can lead to either confusion or undesired conflicts between the patient and those who are professionally and legally qualified to evaluate his working ability. In order to carry out the medical part of the expertise for evaluating the working ability it is necessary have an accurate diagnosis of particular disease, an opinion whether the process is definite or can be improved by and adequate therapy in addition to the state of morphology and function of all the organs and systems essential for responding to the biological requirements of the working operations at a given job as well as the estimate of the functional ability of the organs or systems. The practical evaluation of the working ability also has to include the professional utilization factor, that is, it is necessary to determine the working operations' requirements as well as the conditions in which they are performed at a given job. Within the working ability it is necessary to take into consideration the psychosocial structure of the sick person, years of age, qualification and professional degree as well as the society's possibility to accept the proposals made by the medical and other experts. Tn judging the working ability of the patients having a cardiac disease it is indispensable to view every case separately since it always implies its own factors. The evaluation must be done in specially-qualified institutions having an adequate team of experts including a specialist of labor medicine, a cardiologist, a safety-at-work expert, a technologist, a psychologist, a social worker and other medical and non-medical staff.

  17. The promoter activities of sucrose phosphate synthase genes in rice, OsSPS1 and OsSPS11, are controlled by light and circadian clock, but not by sucrose

    Directory of Open Access Journals (Sweden)

    Madoka eYonekura

    2013-03-01

    Full Text Available Although sucrose plays a role in sugar sensing and its signaling pathway, little is known about the regulatory mechanisms of the expressions of plant sucrose-related genes. Our previous study on the expression of the sucrose phosphate synthase gene family in rice (OsSPSs suggested the involvement of sucrose sensing and/or circadian rhythm in the transcriptional regulation of OsSPS. To examine whether the promoters of OsSPSs can be controlled by sugars and circadian clock, we produced transgenic rice plants harboring a promoter–luciferase construct for OsSPS1 or OsSPS11 and analyzed the changes in the promoter activities by monitoring bioluminescence from intact transgenic plants in real time. Transgenic plants fed sucrose, glucose, or mannitol under continuous light conditions showed no changes in bioluminescence intensity; meanwhile, the addition of sucrose increased the concentration of sucrose in the plants, and the mRNA levels of OsSPS remained constant. These results suggest that these OsSPS promoters may not be regulated by sucrose levels in the tissues. Next, we investigated the changes in the promoter activities under 12-h light/12-h dark cycles and continuous light conditions. Under the light–dark cycle, both OsSPS1 and OsSPS11 promoter activities were low in the dark and increased rapidly after the beginning of the light period. When the transgenic rice plants were moved to the continuous light condition, both POsSPS1::LUC and POsSPS11::LUC reporter plants exhibited circadian bioluminescence rhythms; bioluminescence peaked during the subjective day with a 27-h period: in the early morning as for OsSPS1 promoter and midday for OsSPS11 promoter. These results indicate that these OsSPS promoters are controlled by both light illumination and circadian clock and that the regulatory mechanism of promoter activity differs between the 2 OsSPS genes.

  18. French registry of workers handling engineered nanomaterials as an instrument of integrated system for surveillance and research

    Science.gov (United States)

    Guseva Canu, I.; Boutou-Kempf, O.; Delabre, L.; Ducamp, S.; Iwatsubo, Y.; Marchand, J. L.; Imbernon, E.

    2013-04-01

    Despite the lack of data on the human health potential risks related to the engineered nanomaterials (ENM) exposure, ENM handling spreads in industry. The French government officially charged the InVS to develop an epidemiological surveillance of workers occupationally exposed to ENM. An initial surveillance plan was proposed on the basis of literature review and discussions with national and international ENM and occupational safety and health (OSH) experts. In site investigations and technical visits were then carried out to build an adequate surveillance system and to assess its feasibility. The current plan consists of a multi-step methodology where exposure registry construction is paramount. Workers potentially exposed to carbon nanotubes (CNT) or nanometric titanium dioxide (TiO2) will be identified using a 3-level approach: 1-identification and selection of companies concerned with ENM exposure (based on compulsory declaration and questionnaires), 2-in site exposure assessment and identification of the jobs/tasks with ENM exposure (based on job-expose matrix, further supplemented with measurements), and 3-identification of workers concerned. Data of interest will be collected by questionnaire. Companies and workers inclusion questionnaires are designed and currently under validation. This registration is at the moment planned for three years but could be extended and include other ENM. A prospective cohort study will be established from this registry, to pursue surveillance objectives and serve as an infrastructure for performing epidemiological and panel studies with specific research objectives.

  19. French registry of workers handling engineered nanomaterials as an instrument of integrated system for surveillance and research

    International Nuclear Information System (INIS)

    Guseva Canu, I; Boutou-Kempf, O; Delabre, L; Ducamp, S; Iwatsubo, Y; Marchand, J L; Imbernon, E

    2013-01-01

    Despite the lack of data on the human health potential risks related to the engineered nanomaterials (ENM) exposure, ENM handling spreads in industry. The French government officially charged the InVS to develop an epidemiological surveillance of workers occupationally exposed to ENM. An initial surveillance plan was proposed on the basis of literature review and discussions with national and international ENM and occupational safety and health (OSH) experts. In site investigations and technical visits were then carried out to build an adequate surveillance system and to assess its feasibility. The current plan consists of a multi-step methodology where exposure registry construction is paramount. Workers potentially exposed to carbon nanotubes (CNT) or nanometric titanium dioxide (TiO 2 ) will be identified using a 3-level approach: 1-identification and selection of companies concerned with ENM exposure (based on compulsory declaration and questionnaires), 2-in site exposure assessment and identification of the jobs/tasks with ENM exposure (based on job-expose matrix, further supplemented with measurements), and 3-identification of workers concerned. Data of interest will be collected by questionnaire. Companies and workers inclusion questionnaires are designed and currently under validation. This registration is at the moment planned for three years but could be extended and include other ENM. A prospective cohort study will be established from this registry, to pursue surveillance objectives and serve as an infrastructure for performing epidemiological and panel studies with specific research objectives.

  20. Asymmetric Information under the Kafala Sponsorship System: Impacts on Foreign Domestic Workers' Income and Employment Status in the GCC Countries

    OpenAIRE

    Malit, Froilan T.; Naufal, George S

    2016-01-01

    This paper examines the legal and policy implications of information asymmetry on foreign domestic workers employed under the Kafala sponsorship system in the Gulf Cooperation Council (GCC) countries. Drawing from ethnographic and field-based observations in large GCC migrant destinations – including Kuwait, Qatar, and the United Arab Emirates (UAE) – we investigate the information flows and market uncertainties between five key stakeholders: labor-receiving governments, labor-sending governm...

  1. A comparison of the observed and the expected cancers of the haematopoietic and lymphatic systems among workers at Windscale

    International Nuclear Information System (INIS)

    Dolphin, G.W.

    1976-12-01

    Data are given about the cases of cancers of the haematopoietic and lymphatic systems among workers at Windscale Works, BNFL during the period 1950 to 1974. The number of cancers of these types expected to occur in the working population at Windscale has been estimated for the same period. For none of these types is the observed number of cancers significantly different at the 95% confidence level from that expected. (author)

  2. Health system challenges to integration of mental health delivery in primary care in Kenya- perspectives of primary care health workers

    OpenAIRE

    Jenkins, Rachel; Othieno, Caleb; Okeyo, Stephen; Aruwa, Julyan; Kingora, James; Jenkins, Ben

    2013-01-01

    Background Health system weaknesses in Africa are broadly well known, constraining progress on reducing the burden of both communicable and non-communicable disease (Afr Health Monitor, Special issue, 2011, 14-24), and the key challenges in leadership, governance, health workforce, medical products, vaccines and technologies, information, finance and service delivery have been well described (Int Arch Med, 2008, 1:27). This paper uses focus group methodology to explore health worker perspecti...

  3. Beta-carotene reduces oxidative stress, improves glutathione metabolism and modifies antioxidant defense systems in lead-exposed workers

    International Nuclear Information System (INIS)

    Kasperczyk, Sławomir; Dobrakowski, Michał; Kasperczyk, Janusz; Ostałowska, Alina; Zalejska-Fiolka, Jolanta; Birkner, Ewa

    2014-01-01

    The aim of this study was to determine whether beta-carotene administration reduces oxidative stress and influences antioxidant, mainly glutathione-related, defense systems in workers chronically exposed to lead. The population consisted of two randomly divided groups of healthy male volunteers exposed to lead. Workers in the first group (reference group) were not administered any antioxidants, while workers in the second group (CAR group) were treated orally with 10 mg of beta-carotene once a day for 12 weeks. Biochemical analysis included measuring markers of lead-exposure and oxidative stress in addition to the levels and activities of selected antioxidants. After treatment, levels of malondialdehyde, lipid hydroperoxides and lipofuscin significantly decreased compared with the reference group. However, the level of glutathione significantly increased compared with the baseline. Treatment with beta-carotene also resulted in significantly decreased glutathione peroxidase activity compared with the reference group, while the activities of other glutathione-related enzymes and of superoxide dismutase were not significantly changed. However, the activities of glucose-6-phosphate dehydrogenase and catalase, as well as the level of alpha-tocopherol, were significantly higher after treatment compared with the baseline. Despite controversy over the antioxidant properties of beta-carotene in vivo, our findings showed reduced oxidative stress after beta-carotene supplementation in chronic lead poisoning. - Highlights: • Beta-carotene reduces oxidative stress in lead-exposed workers. • Beta-carotene elevates glutathione level in lead-exposed workers. • Beta-carotene administration could be beneficial in lead poisoning

  4. Beta-carotene reduces oxidative stress, improves glutathione metabolism and modifies antioxidant defense systems in lead-exposed workers

    Energy Technology Data Exchange (ETDEWEB)

    Kasperczyk, Sławomir, E-mail: kaslav@mp.pl [Dept. of Biochemistry, School of Medicine with the Division of Dentistry, Medical University of Silesia, ul. Jordana 19, 41-808 Zabrze (Poland); Dobrakowski, Michał [Dept. of Biochemistry, School of Medicine with the Division of Dentistry, Medical University of Silesia, ul. Jordana 19, 41-808 Zabrze (Poland); Kasperczyk, Janusz [Dept. of Environmental Medicine and Epidemiology, School of Medicine with the Division of Dentistry, Medical University of Silesia, ul. Jordana 19, 41-808 Zabrze (Poland); Ostałowska, Alina; Zalejska-Fiolka, Jolanta; Birkner, Ewa [Dept. of Biochemistry, School of Medicine with the Division of Dentistry, Medical University of Silesia, ul. Jordana 19, 41-808 Zabrze (Poland)

    2014-10-01

    The aim of this study was to determine whether beta-carotene administration reduces oxidative stress and influences antioxidant, mainly glutathione-related, defense systems in workers chronically exposed to lead. The population consisted of two randomly divided groups of healthy male volunteers exposed to lead. Workers in the first group (reference group) were not administered any antioxidants, while workers in the second group (CAR group) were treated orally with 10 mg of beta-carotene once a day for 12 weeks. Biochemical analysis included measuring markers of lead-exposure and oxidative stress in addition to the levels and activities of selected antioxidants. After treatment, levels of malondialdehyde, lipid hydroperoxides and lipofuscin significantly decreased compared with the reference group. However, the level of glutathione significantly increased compared with the baseline. Treatment with beta-carotene also resulted in significantly decreased glutathione peroxidase activity compared with the reference group, while the activities of other glutathione-related enzymes and of superoxide dismutase were not significantly changed. However, the activities of glucose-6-phosphate dehydrogenase and catalase, as well as the level of alpha-tocopherol, were significantly higher after treatment compared with the baseline. Despite controversy over the antioxidant properties of beta-carotene in vivo, our findings showed reduced oxidative stress after beta-carotene supplementation in chronic lead poisoning. - Highlights: • Beta-carotene reduces oxidative stress in lead-exposed workers. • Beta-carotene elevates glutathione level in lead-exposed workers. • Beta-carotene administration could be beneficial in lead poisoning.

  5. Village malaria worker performance key to the elimination of artemisinin-resistant malaria: a Western Cambodia health system assessment.

    Science.gov (United States)

    Canavati, Sara E; Lawpoolsri, Saranath; Quintero, Cesia E; Nguon, Chea; Ly, Po; Pukrittayakamee, Sasithon; Sintasath, David; Singhasivanon, Pratap; Peeters Grietens, Koen; Whittaker, Maxine Anne

    2016-05-20

    Village malaria workers (VMWs) and mobile malaria workers (MMWs) are a critical component of Cambodia's national strategy to eliminate Plasmodium falciparum malaria by 2025. Since 2004, VMWs have been providing malaria diagnosis through the use of rapid diagnostic tests and free-of-charge artemisinin-based combination therapy in villages more than 5 km away from the closest health facility. They have also played a key role in the delivery of behaviour change communication interventions to this target population. This study aimed to assess the job performance of VMWs/MMWs, and identify challenges they face, which may impede elimination efforts. A mixed-methods assessment was conducted in five provinces of western Cambodia. One hundred and eighty five VMW/MMW participants were surveyed using a structured questionnaire. Qualitative data was gathered through a total of 60 focus group discussions and 65 in-depth interviews. Data triangulation of the qualitative and quantitative data was used during analysis. Overall, VMWs/MMWs met or exceeded the expected performance levels (80 %). Nevertheless, some performance gaps were identified. Misconceptions regarding malaria transmission and prevention were found among workers. The recommended approach for malaria treatment, directly-observed treatment (DOT), had low implementation rates. Stock-outs, difficulties in reaching out to migrant and mobile populations, insufficient means of transportation and dwindling worker satisfaction also affected job performance. VMW/MMW job performance must be increased from 80 to 100 % in order to achieve elimination. In order to do this, it is recommended for the national malaria programme to eliminate worker malaria knowledge gaps. Barriers to DOT implementation and health system failures also need to be addressed. The VMW programme should be expanded on several fronts in order to tackle remaining performance gaps. Findings from this evaluation are useful to inform the planning of future

  6. Factors affecting the performance of family planning workers: importance of geographical information systems in empirical analysis.

    Science.gov (United States)

    Ali, M; De Francisco, A; Khan, M M; Chakraborty, J; Myaux, J

    1999-01-01

    Substantial variation in contraceptive prevalence rates (CPRs) and fertility rates (FRs) between community health workers (CHWs) has been documented since the inception of the Matlab family planning program in rural Bangladesh. The coefficients of variation of these indicators for Matlab CHWs were 7% and 26%, respectively, in 1995. To identify the reasons for these performance variations, geographical information system (GIS) approaches were applied to longitudinal and cross-sectional data on 80 CHWs for the period 1980-95. Each observation in the data-set included catchment area-specific characteristics, measures of CHW efficiency in service delivery, and CHW-specific characteristics for one specific year. A one-unit increase in the average age of target women in the catchment area increases the CPR by 9.2%. The CPR increases by 0.2% for each 1% increase in women's literacy and decreases by 0.1% for each 1% increase in the number of Muslim households in the catchment area. An increase of 1 sq. km in the size of the catchment area reduces the CPR by 3%. CHW performance increases with age up to 45 years and then decreases. Similarly, a 1-year increase in the average age of target women reduces the FR by 2%. A 10% increase in the size of the catchment area reduces program performance by increasing the FR by 1.4%. A single geographic barrier to movement increases the FR by 1%. This analysis indicates that CHW performance can be improved significantly by defining catchment areas through use of GIS techniques. Without knowledge of the spatial distribution of population and the physical barriers to movement, allocating a fixed number of clients per CHW may not be the most efficient approach.

  7. Functional state of the bronchopulmonary system in Mayak nuclear workers inhaled plutonium-239 aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Belyaeva, Z.; Grigoryeva, E.; Khokhryakov, V. [Southern Urals Biophysics Institute, Ozyorsk (Russian Federation)

    2006-07-01

    Full text of publication follows: The current system of the individual and collective protection facilities for nuclear personnel permits decreasing the radiation dose from internal emitters at the most. At the same time, specific production conditions do not exclude possible inhalation of plutonium-239 aerosols. As the lung is the critical organ for this isotope, the study of respiratory function is aimed at detecting of pre-clinical lung pathology. Early detection of internal exposure effects on functional state of respiratory apparatus is difficult due to a number of confounding actors of non-radiation nature, one of which is smoking. Functional state of bronchopulmonary system was studied in 386 males, workers of the first Russian nuclear facility. 1198 examinations were carried out during medical inspection as well as hospitalization for routine preventive inspection. Most of males (39.4%) started working at the age of 21-26 years and 27.2% at the age of 20 years. The main factors of occupational exposure were exposure to plutonium-239 aerosols and the external gamma -rays. The absorbed dose to lungs from incorporated plutonium-239 was 0-435.8 c Gy. Whole-body external gamma dose varied from 0 to 382 c Gy at the examination. Individual dosimetry data were provided by the Mayak Radiation Safety Department and Internal Dosimetry Laboratory of the Southern Urals Biophysics Institute. While studying respiratory function, the most informative indices characterizing the state of lung tissue and tracheobronchial system such as vital capacity inspiration, forced expiratory volume, forced inspiratory volume, test Tiffno, diffusion capacity, characteristics of the flow vs. volume of the forced vital capacity inspiration curve, and resistance were used. Analysis was done separately for smokers and nonsmokers. Smoking index, i.e. product of number of smoked cigarettes per day and number of years of smoking was considered an integral value. The study did not reveal the

  8. Functional state of the bronchopulmonary system in Mayak nuclear workers inhaled plutonium-239 aerosols

    International Nuclear Information System (INIS)

    Belyaeva, Z.; Grigoryeva, E.; Khokhryakov, V.

    2006-01-01

    Full text of publication follows: The current system of the individual and collective protection facilities for nuclear personnel permits decreasing the radiation dose from internal emitters at the most. At the same time, specific production conditions do not exclude possible inhalation of plutonium-239 aerosols. As the lung is the critical organ for this isotope, the study of respiratory function is aimed at detecting of pre-clinical lung pathology. Early detection of internal exposure effects on functional state of respiratory apparatus is difficult due to a number of confounding actors of non-radiation nature, one of which is smoking. Functional state of bronchopulmonary system was studied in 386 males, workers of the first Russian nuclear facility. 1198 examinations were carried out during medical inspection as well as hospitalization for routine preventive inspection. Most of males (39.4%) started working at the age of 21-26 years and 27.2% at the age of 20 years. The main factors of occupational exposure were exposure to plutonium-239 aerosols and the external gamma -rays. The absorbed dose to lungs from incorporated plutonium-239 was 0-435.8 c Gy. Whole-body external gamma dose varied from 0 to 382 c Gy at the examination. Individual dosimetry data were provided by the Mayak Radiation Safety Department and Internal Dosimetry Laboratory of the Southern Urals Biophysics Institute. While studying respiratory function, the most informative indices characterizing the state of lung tissue and tracheobronchial system such as vital capacity inspiration, forced expiratory volume, forced inspiratory volume, test Tiffno, diffusion capacity, characteristics of the flow vs. volume of the forced vital capacity inspiration curve, and resistance were used. Analysis was done separately for smokers and nonsmokers. Smoking index, i.e. product of number of smoked cigarettes per day and number of years of smoking was considered an integral value. The study did not reveal the

  9. INFLUENCE OF WORKING CONDITIONS ON THE OCCURRENCE AND PREVALENCE OF DISEASES MUSCULOSKELETAL SYSTEM OF THE WORKERS OF LLC "TOLYATTI TRANSFORMER"

    Directory of Open Access Journals (Sweden)

    E. V. Semina

    2013-01-01

    Full Text Available The influence of working conditions upon the occurrence and (or prevalence of the musculoskeletal system diseases according to the results of the periodical medical examinations of Co. ltd. “TOGLIATTY TRANSFORMATOR” workers is analyzed. The direct influence of work conditions upon the occurrence and (or prevalence of the musculoskeletal system diseases in view of the prevalence of the foregoing diseases among different professions and working processes factors irrespective of age, sex and seniority is shown. Exciting causes of musculoskeletal system diseases are not only overwork due to hard manual labor, but also prolonged stay in a forced position.

  10. Produced Water Treatment Using the Switchable Polarity Solvent Forward Osmosis (SPS FO) Desalination Process: Preliminary Engineering Design Basis

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, Daniel; Adhikari, Birendra; Orme, Christopher; Wilson, Aaron

    2016-05-01

    Switchable Polarity Solvent Forward Osmosis (SPS FO) is a semi-permeable membrane-based water treatment technology. INL is currently advancing SPS FO technology such that a prototype unit can be designed and demonstrated for the purification of produced water from oil and gas production operations. The SPS FO prototype unit will used the thermal energy in the produced water as a source of process heat, thereby reducing the external process energy demands. Treatment of the produced water stream will reduce the volume of saline wastewater requiring disposal via injection, an activity that is correlated with undesirable seismic events, as well as generate a purified product water stream with potential beneficial uses. This paper summarizes experimental data that has been collected in support of the SPS FO scale-up effort, and describes how this data will be used in the sizing of SPS FO process equipment. An estimate of produced water treatment costs using the SPS FO process is also provided.

  11. [Biological exposure-related injuries in workers in a health system of the health service of Galicia, Spain].

    Science.gov (United States)

    Cores Calvo, Juan; Muñiz Saborido, José Ramón; González Iglesias, Marta Clara

    2013-01-01

    The objective of this study was to describe the factors involved in biological exposure-related injuries occurring in worker from a health system in Galicia, Spain. The study was conducted in a health system of the Health Service of Galicia, that included four hospitals and 72 primary care centers, with nearly 6000 workers. The study used occupational injury data available o in the injury registry of the Health Service of Galicia for the year 2011. We identified 194 biohazard-related injuries. Exposures, locations, devices, tasks and causes of these incidents were analysed. The majority of biological exposures occurred through needlestick injuries (82%). The areas where more injuries occurred were in inpatient wards (37%) and operating rooms (25%). The devices most frequently involved were suture needles (15%) and insulin needles (15%). The most frequently recorded causes were lack of training and information, together with lack of biosafety devices. Worker training and information should be promoted along with the implementation of biosafety devices, as the latter measure alone does not seem sufficient to reduce the number of injuries. Copyright belongs to the Societat Catalana de Seguretat i Medicina del Treball.

  12. Digital Signal Processing Applications and Implementation for Accelerators Digital Notch Filter with Programmable Delay and Betatron Phase Adjustment for the PS, SPS and LHC Transverse Dampers

    CERN Document Server

    Rossi, V

    2002-01-01

    In the framework of the LHC project and the modifications of the SPS as its injector, I present the concept of global digital signal processing applied to a particle accelerator, using Field Programmable Gate Array (FPGA) technology. The approach of global digital synthesis implements in numerical form the architecture of a system, from the start up of a project and the very beginning of the signal flow. It takes into account both the known parameters and the future evolution, whenever possible. Due to the increased performance requirements of today's projects, the CAE design methodology becomes more and more necessary to handle successfully the added complexity and speed of modern electronic circuits. Simulation is performed both for behavioural analysis, to ensure conformity to functional requirements, and for time signal analysis (speed requirements). The digital notch filter with programmable delay for the SPS Transverse Damper is now fully operational with fixed target and LHC-type beams circulating in t...

  13. Why are the Workers' Compensation systems dysfunctional? From scientists we ought also to expect science!

    Science.gov (United States)

    Samuels, Sheldon W

    2010-01-01

    In the context of the history of science and the American labor movement, this comment in response to Joseph LaDou's in this issue briefly addresses impediments to Workers' Compensation reform: intellectual lapses in understanding the key concept of causation and political mistakes rooted in professional timidity. The result is the perpetuation of failures of government.

  14. Higher brightness beams from the SPS for the HL-LHC era

    CERN Document Server

    AUTHOR|(CDS)2085448; Bracco, Chiara (CERN)

    The need to push the LHC beyond its limits and increase the deliverable luminosity to the experiments by about one order of magnitude has driven the ongoing injector and HL-LHC upgrades. The higher luminosity requires to increase the beam brightness, which directly translates in the need to adapt the different machine protection systems. Among all the foreseen upgrades, the transfer line collimators (TCDI) and the LHC injection protection systems will be revised. In particular, the guaranteed protection is evaluated in this Ph D work, together with the specification for the minimum shielded aperture in case of injection failures. A detailed model is also developed which insures a more reliable and efficient procedure for the validation of the TCDI setup within the required accuracy. The physics beyond colliders will also be pushed over its current limits in the HL-LHC era. SHiP, a new proposed fixed target experiment served by the SPS is under study. The unprecedented level of requested protons on target per ...

  15. Preparation of Single-cohort Colonies and Hormone Treatment of Worker Honeybees to Analyze Physiology Associated with Role and/or Endocrine System.

    Science.gov (United States)

    Ueno, Takayuki; Kawasaki, Kiyoshi; Kubo, Takeo

    2016-09-06

    Honeybee workers are engaged in various tasks related to maintaining colony activity. The tasks of the workers change according to their age (age-related division of labor). Young workers are engaged in nursing the brood (nurse bees), while older workers are engaged in foraging for nectar and pollen (foragers). The physiology of the workers changes in association with this role shift. For example, the main function of the hypopharyngeal glands (HPGs) changes from the secretion of major royal jelly proteins (MRJPs) to the secretion of carbohydrate-metabolizing enzymes. Because worker tasks change as the workers age in typical colonies, it is difficult to discriminate the physiological changes that occur with aging from those that occur with the role shift. To study the physiological changes in worker tissues, including the HPGs, in association with the role shift, it would be useful to manipulate the honeybee colony population by preparing single-cohort colonies in which workers of almost the same age perform different tasks. Here we describe a detailed protocol for preparing single-cohort colonies for this analysis. Six to eight days after single-cohort colony preparation, precocious foragers that perform foraging tasks earlier than usual appear in the colony. Representative results indicated role-associated changes in HPG gene expression, suggesting role-associated HPG function. In addition to manipulating the colony population, analysis of the endocrine system is important for investigating role-associated physiology. Here, we also describe a detailed protocol for treating workers with 20-hydroxyecdysone (20E), an active form of ecdysone, and methoprene, a juvenile hormone analogue. The survival rate of treated bees was sufficient to examine gene expression in the HPGs. Gene expression changes were observed in response to 20E- and/or methoprene-treatment, suggesting that hormone treatments induce physiological changes of the HPGs. The protocol for hormone

  16. The Mayak Worker Dosimetry System (MWDS-2013): how to reduce hyper-realisations to realisations

    International Nuclear Information System (INIS)

    Birchall, A.; Puncher, M.

    2017-01-01

    Two important aspects in which the MWDS-2013 output (absorbed dose to organs calculated in each calendar year) differs from previous data bases (MWDS-2008 and DOSES-2005) are that they have been designed to (a) deal explicitly with uncertainties in model parameters, and (b) differentiate parameters that are considered to be shared (unknown, but having the same value for all workers) and unshared (unknown, but having different values between workers). A multiple-realisation approach is used to preserve information on the effects of shared and unshared parameters both for internal and external doses. Previously, a single realisation (a set of organ doses: one for each worker in the cohort) was calculated using the best estimates of parameter values only. In MWDS-2013, a set of 1000 realisations is produced, to reflect the uncertainty in assumed model parameters: each realisation using a different set of parameter values. Within each realisation, shared parameter values are fixed throughout the cohort, while unshared parameters are allowed to vary between workers. One problem is that because the calculation of organ dose is Bayesian, the estimate for each organ dose is not just a single value, but is itself a distribution (hyper-dose). Technically, it is the probability density of dose given the sampled set of parameter values and given the data for that worker. Thus, in our case, the realisations consist not of single doses, but distributions of doses. The term hyper-realisation is used to differentiate this from the more conventional realisation. Although the multiple hyper-realisation in principle contains all of the necessary information on parameter uncertainty, including shared and unshared parameters, in order to make preliminary epidemiological analyses tractable, and also for consistency with the external doses, it was required to convert the hyper-realisations to realisations. The aim of this paper is to discuss the different approaches that were considered

  17. Radiation exposure and central nervous system cancers: A case-control study among workers at two nuclear facilities

    International Nuclear Information System (INIS)

    Carpenter, A.V.; Flanders, W.D.; Frome, E.L.; Crawford-Brown, D.J.; Fry, S.A.

    1987-03-01

    A nested case-control study was conducted among workers employed between 1943 and 1977 at two nuclear facilities to investigate the possible association of primary malignant neoplasms of the central nervous system (CNS) with occupational exposure to ionizing radiation from external and internal sources. Eighty-nine white male and female workers, who according to the information on death certificates dies of primary CNS cancers, were identified as cases. Four matched controls were selected for each case. External radiation exposure data were available from film badge readings for individual workers, whereas radiation dose to lung from internally deposited radionuclides, mainly uranium, was estimated from area and personnel monitoring data and was used in analyses in lieu of the dose to the brain. Matched sets were included in the analyses only if information was available for the case and at least one of the corresponding controls. Thus, the analyses of external radiation included 27 cases and 90 matched controls, and 47 cases and 120 matched controls were analyzed for the effects of radiation from internally deposited uranium. No association was observed between deaths fron CNS cancers and occupational exposure to ionizing radiation from external or internal sources. However, due to the small number of monitored subjects and low doses, a weak association could not be ruled out. 43 refs., 1 fig., 15 tabs

  18. Socio-economic and cultural factors associated with smoking prevalence among workers in the National Health System in Belo Horizonte

    Directory of Open Access Journals (Sweden)

    Luiz Fábio Machado Barbosa

    2015-06-01

    Full Text Available OBJECTIVE: To identify factors related to smoking among health workers of the National Health System in Belo Horizonte, Minas Gerais, Brazil.METHODS: A cross-sectional study based on a survey conducted between September 2008 and January 2009 with a stratified sample. Data on sociodemographic, health, employment, and work characteristics were analyzed. Poisson regression models with robust variance and estimation of unadjusted and adjusted prevalence ratios were used to establish associations at a 5% significance level for inclusion in the final model.RESULTS: In 1,759 questionnaires analyzed, in which the question related to smoking was answered, the overall prevalence of smoking was 15.7%. Reasonable relationship between requirements and available resources remained negatively correlated to smoking in the final model (PR = 0.75; 95%CI 0.58 - 0.96. The variables that remained positively associated with smoking were being male (PR = 1.75; 95%CI 1.36 - 2.25 and the following positions: community health workers (PR = 2.98; 95%CI 1.76 - 5.05, professionals involved in monitoring (PR = 3.86; 95%CI 1.63 - 5.01, administrative and other general services workers (PR = 2.47; 95%CI 1.51 - 4.05; technical mid-level workers (PR = 2.23; 95%CI 1.31 - 3.78, including nurses and practical nurses (PR = 2.07; 95%CI 1.18 - 3.64.CONCLUSION: Specific occupational subgroups were identified and should be prioritized in smoking cessation and prevention programs.

  19. Benchmark of the SixTrack-Fluka Active Coupling Against the SPS Scrapers Burst Test

    CERN Multimedia

    Mereghetti, A; Cerutti, F

    2014-01-01

    The SPS scrapers are a key ingredient for the clean injection into the LHC: they cut off halo particles quite close to the beam core (e.g.~3.5 sigma) just before extraction, to minimise the risk for quenches. The improved beam parameters as envisaged by the LHC Injectors Upgrade (LIU) Project required a revision of the present system, to assess its suitability and robustness. In particular, a burst (i.e. endurance) test of the scraper blades has been carried out, with the whole bunch train being scraped at the centre (worst working conditions). In order to take into account the effect of betatron and longitudinal beam dynamics on energy deposition patterns, and nuclear and Coulomb scattering in the absorbing medium onto loss patterns, the SixTrack and Fluka codes have been coupled, profiting from the best of the refined physical models they respectively embed. The coupling envisages an active exchange of tracked particles between the two codes at each turn, and an on-line aperture check in SixTrack, in order ...

  20. Exposure of CR39 Stacks to Oxygen and Sulphur Beams at the CERN-SPS

    CERN Multimedia

    2002-01-01

    We plan to expose 8 stacks of CR39 sheets to oxygen and sulphur ions of 60 and 200~GeV at the CERN-SPS.\\\\ \\\\ The main purpose of the exposures is the calibration of the CR39 sheets used for a large area experimental search for magnetic monopoles at the Gran Sasso Laboratory (experiment MACRO). \\\\ \\\\ The stacks have 20~layers of CR39, each layer 13~cm~x~7~cm and 1.4~mm thick. A copper absorber is located after the first 6 layers. \\\\ \\\\ We require exposures of about 2000 tracks per cm$^2$ over the entire area of the stack with a uniform illumination. The standard beam used for the emulsion experiments is normally adequate for this purpose.\\\\ \\\\ We have performed one exposure to sulphur ions. The etched tracks have been measured automatically with the Elbeck image analyser system. We measured the incoming sulphur ions as well as the nuclear fragments produced in the copper absorber. Clean separation among the peaks due to the various fragments is obtained (there is no indication of nuclei with fractional electri...

  1. Market-based multiagent system for reconfiguration of shipboard power systems

    International Nuclear Information System (INIS)

    Huang, Kai; Srivastava, Sanjeev K.; Cartes, David A.; Sun, Li-Hsiang

    2009-01-01

    On ships, the electric shipboard power system (SPS) supplies electrical power to critical functions such as navigation, communication, emergency systems, and in the case of warships, weapon systems. During ship operation, some parts of the SPS may become unavailable due to damage, fault, or maintenance. For the survivability and reliability of ships, it is desired to make the SPS highly reconfigurable. This paper presents a market-based multiagent system (MAS) for the reconfiguration of radial SPS. Radial SPSs are found on majority of ships. In the proposed MAS, each agent only communicates with its neighbor agents to make the system work in a fully decentralized manner. The MAS is implemented using Java Agent Development Framework (JADE), which is fully implemented in Java and compliant with Foundation of Intelligent Physical Agents (FIPA). An SPS with two generators and four loads is used for testing the proposed MAS. The results show the proposed MAS can successfully reconfigure a radial SPS. (author)

  2. Vertical funding, non-governmental organizations, and health system strengthening: perspectives of public sector health workers in Mozambique.

    Science.gov (United States)

    Mussa, Abdul H; Pfeiffer, James; Gloyd, Stephen S; Sherr, Kenneth

    2013-06-14

    In the rapid scale-up of human immunodeficiency virus (HIV) care and acquired immunodeficiency syndrome (AIDS) treatment, many donors have chosen to channel their funds to non-governmental organizations and other private partners rather than public sector systems. This approach has reinforced a private sector, vertical approach to addressing the HIV epidemic. As progress on stemming the epidemic has stalled in some areas, there is a growing recognition that overall health system strengthening, including health workforce development, will be essential to meet AIDS treatment goals. Mozambique has experienced an especially dramatic increase in disease-specific support over the last eight years. We explored the perspectives and experiences of key Mozambican public sector health managers who coordinate, implement, and manage the myriad donor-driven projects and agencies. Over a four-month period, we conducted 41 individual qualitative interviews with key Ministry workers at three levels in the Mozambique national health system, using open-ended semi-structured interview guides. We also reviewed planning documents. All respondents emphasized the value and importance of international aid and vertical funding to the health sector and each highlighted program successes that were made possible by recent increased aid flows. However, three serious concerns emerged: 1) difficulties coordinating external resources and challenges to local control over the use of resources channeled to international private organizations; 2) inequalities created within the health system produced by vertical funds channeled to specific services while other sectors remain under-resourced; and 3) the exodus of health workers from the public sector health system provoked by large disparities in salaries and work. The Ministry of Health attempted to coordinate aid by implementing a "sector-wide approach" to bring the partners together in setting priorities, harmonizing planning, and coordinating

  3. Academic Training Lecture Regular Programme: Physics at the AD/PS/SPS

    CERN Multimedia

    2012-01-01

    Physics at the AD/PS/SPS (1/4), by Lau Gatignon (CERN).   Monday, June 18, 2012 from 11:00 to 12:00 (Europe/Zurich) at CERN ( 222-R-001 - Filtration Plant )   Lecture 1: The CERN injector complex and beams for non-LHC physics. The various machines and beam lines in the CERN injector complex are presented, from the linacs to the SPS. Special emphasis is given to the beam lines at the PS and SPS machines: AD, North and East Areas, nTOF and CNGS and HiRadMad as well as the ion beams. A short outlook is given to possible future upgrades and projects.   More information here.  

  4. The SPS beam parameters, the operational cycle, and proton sharing with the SHiP facility

    CERN Document Server

    Arduini, Gianluigi; Gatignon, Lau; Cornelis, Karel

    2015-01-01

    The SHiP experiment aims at acquiring a total of 4×1019 protons on target per year. Based on demonstrated SPS performance for CNGS, the expected proton sharing between the TCC2 targets and SHiP is estimated taking into account the constraints in the super-cycle composition. We review the SPS beam parameters, the operational cycles taking into account the concurrent operation of the SPS as LHC injector and for the TCC2 experiments and the limitations on the maximum possible power dissipation and the expected sharing of the protons on target of the SHiP facility with the TCC2 targets. As a typical example this aim could be achieved while maintaining a duty cycle for the other fixed target experiments of about 18%.

  5. Aerial view of the CERN-Meyrin site during building work for the SPS

    CERN Multimedia

    1974-01-01

    Visible on the right hand site are three building areas: in front the area around pit 6 of the SPS (where the ejection to the West Area branches off), in the middle the area around the 'civil engineering pit 7', and in the back the area around the SPS pit 1 where injection takes place. The SPS tunnel, 6910 m in length with an inner diameter of 4m in its cross section, is at an elevation of 400 m above sea level corresponding to a depth below the surface which varies between 23 and 65 m. It has 6 regularly spaced access pits. The further pit 7 is situated on the injection line about 200m from the injection point. It was used to extract material excavated from the ring and to bring in the precast elements and the concrete for lining the tunnel with a shell of about 30 cm thickness.

  6. Mechanical characterization of cemented carbide WC-6Co (%wt) manufactured by SPS (Spark Plasma Sintering

    International Nuclear Information System (INIS)

    Boidi, G.; Tertuliano, A.J.; Machado, I.F.

    2016-01-01

    This work aimed to manufacture cemented carbide (WC-6%wtCo) obtained by SPS (Spark Plasma Sintering) process and to carry out the mechanical characterization by hardness and fracture toughness. The material was consolidated at 1100 deg C for different holding times (1 min, 5 min, 10 min), in order to evaluate the densification. A reference sample was also used to be compared to SPS. Optical and scanning electron microscopy were carried out to characterize the microstructural features of the samples and mechanical properties were obtained by hardness measurements (micro and macro) and instrumented indentation. The fracture toughness was calculated with the method of Palmqvist. Best results were found in the material sintered by SPS for 10 minutes of holding time, in which 97% of relative density and about 1600 HV_1_0 was reached. (author)

  7. Incidence of disability pensions among slaughterhouse workers in Denmark. With special regard to diagnosis of the musculo-skeletal system

    DEFF Research Database (Denmark)

    Hansen, N S; Jeune, B

    1982-01-01

    The objective of this study was to examine whether slaughterhouse workers (SW) in Denmark have a higher incidence of disability than expected in comparison with the general population and the sub-group of the population that is gainfully employed, especially with regard to pensions awarded...... are calculated on the basis of age-specific incidence rates among all actively employed people. Problems of the study design and selection bias are discussed to facilitate the interpretation of results. A possible deleterious effect of meatpacking on the musculo-skeletal system calls for further investigation....

  8. Study of Regulatory Mechanisms of Activity of Cardiovascular System by Method of Mathematical Analysis of Heart Rhythm in Workers of Chemical Manufactures

    Science.gov (United States)

    Dyachkova, T. V.; Berseneva, I. A.; Zavaltseva, O. A.; Mishina, O. S.

    2018-01-01

    The article presents the results of the study of heart rate variability indices of workers engaged in the production of phenol-formaldehyde plastics and plastics at the «Karbodin» plant. 112 people aged from 20 to 50 years were studied: control group-workers with experience up to 1 year, practically healthy (n = 30), 1 group-workers with work experience up to 5 years (n = 40), 2 group workers with work experience from 5 to 10 years (n = 42). As a result of the study, violations of the functioning of the heart regulation system were revealed, depending on the length of employment. The effectiveness of the method for studying the regulation of the physiological functions of the circulatory system as well as the early diagnosis of occupational pathology has been established.

  9. What have we learned and want to learn from heavy ion collisions at CERN SPS?

    International Nuclear Information System (INIS)

    Shuryak, E.V.

    1999-01-01

    The talk is a mini-review of current status of the field, with emphasis on SPS heavy ion program, now and beyond 2000 (as asked by the organizers). The main question is, of course, whether we can convince ourselves and community at large that the QGP is in fact produced at SPS. We came a long way toward the positive answer, and are definitely on strongly rising part of the learning curve. Still, in few key directions we lack important pieces of evidences

  10. Incident energy dependence of collision dynamics in A+A reactions from AGS to SPS

    International Nuclear Information System (INIS)

    Nara, Yasushi

    2000-01-01

    Based on the hadronic transport model of JAM, I calculate the time evolution of particles, density, temperature and energy density for the heavy ion collision at the incident energies of AGS(11A GeV), JHF(25A GeV) and SPS(158A GeV). Microscopic calculations show that resonance matter with extremely large baryon density is created at AGS energy, while at JHF energy, quark matter with extremely large baryon density is suggested. At SPS energy, quark matter with large baryon density might be created. (author)

  11. Search for the quark-gluon plasma (1989): The NA35 experiment at the CERN SPS

    International Nuclear Information System (INIS)

    Pugh, H.G.

    1989-09-01

    Results from the NA35 experiment at the CERN SPS are described in the context of possible formation and identification of a quark-gluon plasma (QGP). Evidence is presented that the initial energy density and temperature are sufficient for the QGP to be produced, and that hydrodynamic flow occurs in the expansion stage. Evidence for an unexpectedly large pion source size and for enhanced strangeness production is presented, and discussed in terms of QGP formation. Plans for experiments in 1990--91 with an expanded set up are presented, and prospects for a program with Pb beams at the SPS are discussed. 39 refs., 12 figs

  12. Possibility of high efficient beam extraction from the CERN SPS with a bent crystal. Simulation results

    Energy Technology Data Exchange (ETDEWEB)

    Scandale, W. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Laboratoire de l' AccelerateurLineaire (LAL), Universite Paris SudOrsay, Orsay (France); INFN Sezione di Roma, Piazzale Aldo Moro 2, 00185 Rome (Italy); Kovalenko, A.D.; Taratin, A.M. [Joint Institute for Nuclear Research, 141980 Dubna, Moscow Region (Russian Federation)

    2017-03-11

    The extraction of the SPS beam of 270 GeV/c protons assisted by a bent crystal was studied by simulation. Two methods for delivering the SPS beam onto a crystal were considered: transverse diffusion and orbit bump of the beam. It was shown that the main condition for high efficient beam extraction with a bent crystal, which is a small divergence of the incident beam, can be fulfilled. Extraction efficiency up to 99% can be reached for both methods of the beam delivering. The irradiation of the electrostatic septum wires during the beam extraction can be considerably reduced.

  13. Bunch rotation tests at SPS flat top for the AWAKE experiment

    CERN Document Server

    Argyropoulos, T; Bohl, T; Esteban Müller, J F; Petrenko, A; Shaposhnikova, E; Timko, H

    2013-01-01

    This note summarises the results of two MDs on bunch rotation at SPS flat top. The first MD was carried out on 11th July 2012 with the Q26 optics, while the second MD on the 30th October 2012 used the Q20 optics. To obtain a short bunch length, which is important for the plasma wake-field acceleration project AWAKE, the bunches have been rotated in longitudinal phase space on the SPS flat top. The aim of the MDs was to obtain first estimates of what bunch length, intensity, and transverse emittances - which are crucial for the project - can be achieved for high-intensity single bunches.

  14. Measurements made in the SPS with a rest gas profile monitor by collecting electrons

    International Nuclear Information System (INIS)

    Fischer, C.; Koopman, J.

    2000-01-01

    Measurements have regularly been performed during the 1999 run, using the Rest Gas Monitor installed in the SPS. The exploited signal resulted from electrons produced by ionization of the rest gas during the circulating beam passage. A magnetic field parallel to the electric extraction field was applied to channel the electrons. Proton beam horizontal transverse distributions were recorded during entire SPS acceleration cycles, between 14 GeV/c and 450 GeV/c and for different beam structures and bunch intensities. The influence of several parameters on the measured beam profiles was investigated. Results are presented and analyzed in order to determine the performance that can be expected

  15. Standard regulation of obligatory immunoprevention of flu in a control system of incidence of health workers

    Directory of Open Access Journals (Sweden)

    A. E. Zobov

    2016-01-01

    Full Text Available In article the interconnected provisions of the federal legislation and regulations of federal executive authorities regulating a question of obligatory immunization of health workers against flu in aspect of legal consequences of refusal of her are considered. The analysis of the existing regulations and materials of jurisprudence concerning carrying out obligatory vaccination of health workers against flu is carried out. By results of the analysis it is shown that today a problematic issue is absence of the accurate standardly consolidated criteria of reference of these or those categories of medical personnel to group of the subjects of obligatory immunization performing works with sick infectious diseases and, respectively, against flu. It doesn’t allow the management of the medical organizations to differentiate specifically mentioned professions and positions owing to what the requirement about obligatory carrying out preventive inoculations against flu of those health workers whose obligatory vaccination isn’t provided actually is compulsion to vaccination. Therefore, the subsequent discharge from work in case of refusal it работни from carrying out an inoculation strikes at his rights (as in this case, for example, time of discharge isn’t subject to payment and inclusion in the length of service granting the right for the annual paid vacation and is illegal.It is offered to accept as such criterion the labor function fixed by the statutory act of authorized federal executive authority for concrete positions of employees of the medical organizations providing performance of work with sick infectious diseases. The recommendations to heads of the medical organizations concerning the publication of local acts on the organization of vaccinal prevention of flu and adoption of administrative decisions after written refusals of vaccination are provided.

  16. A Group Wage Incentive System for Production Workers at Pearl Harbor Naval Shipyard: Test and Evaluation

    Science.gov (United States)

    1985-09-01

    assume they will result in a sweatshop atmosphere. Workers may have fears that management will tighten standards when performance improves or...N N N ’C 0 0 00C (C ’C M I ’C A ’C ) ’ 0 C N D Q CON >. 01 4 0 0 In ’C N0 (C cc 40 (C ’C a,( C CO - ’C rC (CO -0 ? ’C a (C 0’D 0 0000 ’’ 0 is Nw r, m 4

  17. Assessment of the effects of the zero gravity environment on the health and safety of space workers. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    1980-02-18

    A review was conducted of currently available information relating to adverse effects to the health and safety that SPS space workers may experience. Currently available information on the responses of humans to space flight is somewhat limited and was obtained under conditions which are grossly different from conditions to be experienced by future space workers. The limitations in information and differences in conditions have been considered in the assessment of potential health and safety hazards to the SPS space workers. The study did not disclose any adverse effects that would result in long term deviations to the medical or physiological health of space workers so long as proper preventive or ameleorating actions were taken.

  18. Health Worker Focused Distributed Simulation for Improving Capability of Health Systems in Liberia.

    Science.gov (United States)

    Gale, Thomas C E; Chatterjee, Arunangsu; Mellor, Nicholas E; Allan, Richard J

    2016-04-01

    The main goal of this study was to produce an adaptable learning platform using virtual learning and distributed simulation, which can be used to train health care workers, across a wide geographical area, key safety messages regarding infection prevention control (IPC). A situationally responsive agile methodology, Scrum, was used to develop a distributed simulation module using short 1-week iterations and continuous synchronous plus asynchronous communication including end users and IPC experts. The module contained content related to standard IPC precautions (including handwashing techniques) and was structured into 3 distinct sections related to donning, doffing, and hazard perception training. Using Scrum methodology, we were able to link concepts applied to best practices in simulation-based medical education (deliberate practice, continuous feedback, self-assessment, and exposure to uncommon events), pedagogic principles related to adult learning (clear goals, contextual awareness, motivational features), and key learning outcomes regarding IPC, as a rapid response initiative to the Ebola outbreak in West Africa. Gamification approach has been used to map learning mechanics to enhance user engagement. The developed IPC module demonstrates how high-frequency, low-fidelity simulations can be rapidly designed using scrum-based agile methodology. Analytics incorporated into the tool can help demonstrate improved confidence and competence of health care workers who are treating patients within an Ebola virus disease outbreak region. These concepts could be used in a range of evolving disasters where rapid development and communication of key learning messages are required.

  19. Development of a Universal Safety Behavior Management System for Coal Mine Workers

    Science.gov (United States)

    LI, Jizu; LI, Yuejiao; LIU, Xiaoguang

    2015-01-01

    Background: In China, over 80% of all work-related deaths in the mining industry occur in coal mines and human factors constitute 85% of the direct causes of coal mine accidents, which indicates that significant shortcomings currently exist in the safety behavior management of Chinese coal mine workers. We aimed to verify the impact of human psychological behavior in coal mine accidents systematically through experimental study, theoretical analysis and management application. Methods: Four test instruments (Sensory and cognitive capacity test, Sixteen-Personal Factor Questionnaire, Symptom Checklist 90 Questionnaire and the supervisors’ evaluation) were employed from November 2013 to June 2014 to identify unsafe behavior factors, the self-established Questionnaire of Safety Behavior Norms (QSBN) was also used to propose the safety behavior countermeasures of coal mine employees. Results: The mental health of most coal mine workers’ is relatively poor. The sensory and cognitive capacity of those in different work posts varies greatly, as does the sense of responsibility. Workers are susceptible to external influences, and score low in site management. When the 16-PF and SCL-90 sensory and cognitive assessments were combined, the psychological index predictive power was greatest for estimating sense of efficiency and degree of satisfaction in internal evaluations, while at the same time lowest for estimating control of introversion-extroversion and stress character. Conclusion: The psychological indicators can predict part of employee safety behavior, and assist a coal mine enterprise to recruit staff, develop occupational safety norms and improve the working environment. PMID:26258088

  20. Mobile Computerized Procedure System for the Improved Situation Awareness among Field Workers and Main Control Room Operators

    International Nuclear Information System (INIS)

    Lee, Sungjin; Seong, Nokyu; Jung, Yeonsub

    2013-01-01

    This paper explains the technical issues of the mobile CPS (m-CPS) in the conceptual development stage. The proposed m-CPS can be developed with many recent technologies in the various industry fields based on CRI CPS. Performance and stability of CRI CPS have been tested several times until now. It is expected that more human errors can be reduced by the m-CPS through improved situation awareness and human performance tools for local workers and MCR operators. Some considerations as well as mentioned ones will be reflected in the m-CPS development. Human errors can occur during the test and maintenance of the generator, safety injection system and reactor coolant inventory in nuclear power plants (NPPs). Most of human errors have been occurred by the omission of the prevention techniques such as the self-check, the peer-check, the concurrent verification and etc. Another important reason is the insufficient information sharing among main control room (MCR) operators and field workers. Various field service automation tools have been developed with recent information technology in many countries. APR1400 computerized procedure system (CPS) has been developed for the MCR operators of Shin-Kori 3 and 4 units. Especially, the concurrent verification support design is applied in the construction project of Shin-Hanul 1 and 2 CPS. KHNP central research institute (CRI) expects that the extended application of CPS including the field activity, that is a kind of mobile CPS, can enhance the reduction of human errors

  1. Longitudinal beam parameters and quality checks of the LHC beam in the SPS: further results and comparisons

    CERN Document Server

    Papotti, G; Linnecar, T; Shaposhnikova, E; Tückmantel, Joachim; CERN. Geneva. AB Department

    2008-01-01

    Controlled longitudinal emittance blow up is used, along with other measures, to stabilize the nominal LHC beam in the SPS. Two Machine Development studies (MDs) were carried out in 2007 to evaluate the effectiveness of different noise settings for the longitudinal blow up of the beam. The noise settings are affected by both the presence of the 800 MHz RF system and intensity effects which modify the synchrotron frequency distribution inside the bunch. The results for the first MD are reported in Note [1]. This Note reports on the results of the second MD, carried out on 2007-10-17, as well as the comparison between the two in order to analyse the differences between the two occasions. Figures of merit are used that allow rapid evaluation of the quality of the beam as for example stability and bunch length uniformity across batches.

  2. Event-by-event fluctuations of the mean transverse momentum $M_{p_{T}}$ at SPS energies

    CERN Document Server

    Appelshäuser, Harald

    2004-01-01

    The study of event-by-event fluctuations has been proposed as a tool to investigate the properties of hot and dense nuclear matter created in nuclear collisions. Significant fluctuations of the mean transverse momentum beyond purely statistical ones may signal the passage of the system through the QCD phase boundary or close to the critical point. Fluctuations of M/sub PT/ provide valuable information about the dynamical evolution of A A collisions. In this contribution, recent measurements by the CERES experiment at the CERN-SPS are discussed. The analysis comprises a centrality dependent study of M/sub PT/ fluctuations near mid-rapidity in Pb-Au collisions at 40, 80, and 158 A GeV/c. The non-statistical (dynamical) contribution to M/sub PT/ fluctuations has been evaluated in terms of the fluctuation measure Sigma /sub PT/.

  3. Costs of task allocation with local feedback: Effects of colony size and extra workers in social insects and other multi-agent systems.

    Science.gov (United States)

    Radeva, Tsvetomira; Dornhaus, Anna; Lynch, Nancy; Nagpal, Radhika; Su, Hsin-Hao

    2017-12-01

    Adaptive collective systems are common in biology and beyond. Typically, such systems require a task allocation algorithm: a mechanism or rule-set by which individuals select particular roles. Here we study the performance of such task allocation mechanisms measured in terms of the time for individuals to allocate to tasks. We ask: (1) Is task allocation fundamentally difficult, and thus costly? (2) Does the performance of task allocation mechanisms depend on the number of individuals? And (3) what other parameters may affect their efficiency? We use techniques from distributed computing theory to develop a model of a social insect colony, where workers have to be allocated to a set of tasks; however, our model is generalizable to other systems. We show, first, that the ability of workers to quickly assess demand for work in tasks they are not currently engaged in crucially affects whether task allocation is quickly achieved or not. This indicates that in social insect tasks such as thermoregulation, where temperature may provide a global and near instantaneous stimulus to measure the need for cooling, for example, it should be easy to match the number of workers to the need for work. In other tasks, such as nest repair, it may be impossible for workers not directly at the work site to know that this task needs more workers. We argue that this affects whether task allocation mechanisms are under strong selection. Second, we show that colony size does not affect task allocation performance under our assumptions. This implies that when effects of colony size are found, they are not inherent in the process of task allocation itself, but due to processes not modeled here, such as higher variation in task demand for smaller colonies, benefits of specialized workers, or constant overhead costs. Third, we show that the ratio of the number of available workers to the workload crucially affects performance. Thus, workers in excess of those needed to complete all tasks

  4. Costs of task allocation with local feedback: Effects of colony size and extra workers in social insects and other multi-agent systems.

    Directory of Open Access Journals (Sweden)

    Tsvetomira Radeva

    2017-12-01

    Full Text Available Adaptive collective systems are common in biology and beyond. Typically, such systems require a task allocation algorithm: a mechanism or rule-set by which individuals select particular roles. Here we study the performance of such task allocation mechanisms measured in terms of the time for individuals to allocate to tasks. We ask: (1 Is task allocation fundamentally difficult, and thus costly? (2 Does the performance of task allocation mechanisms depend on the number of individuals? And (3 what other parameters may affect their efficiency? We use techniques from distributed computing theory to develop a model of a social insect colony, where workers have to be allocated to a set of tasks; however, our model is generalizable to other systems. We show, first, that the ability of workers to quickly assess demand for work in tasks they are not currently engaged in crucially affects whether task allocation is quickly achieved or not. This indicates that in social insect tasks such as thermoregulation, where temperature may provide a global and near instantaneous stimulus to measure the need for cooling, for example, it should be easy to match the number of workers to the need for work. In other tasks, such as nest repair, it may be impossible for workers not directly at the work site to know that this task needs more workers. We argue that this affects whether task allocation mechanisms are under strong selection. Second, we show that colony size does not affect task allocation performance under our assumptions. This implies that when effects of colony size are found, they are not inherent in the process of task allocation itself, but due to processes not modeled here, such as higher variation in task demand for smaller colonies, benefits of specialized workers, or constant overhead costs. Third, we show that the ratio of the number of available workers to the workload crucially affects performance. Thus, workers in excess of those needed to

  5. The effect of state of health on organ distribution and excretion of systemic plutonium in the Mayak workers

    International Nuclear Information System (INIS)

    Suslova, K.G.; Khokhryakov, V.F.; Tokarskaya, Z.B.; Nifatov, A.P.; Sokolova, A.B.; Kudryavtzeva, T.I.; Miller, S.C.; Krahenbuhl, M.P.

    2003-01-01

    The extrapulmonary distribution of plutonium in 20 organs (excluding the respiratory tract) was studied in workers who chronically inhaled plutonium at the radiochemical plants of the Mayak Production Association (Ozyorsk, Russia). The data were obtained by radiochemical analysis of soft tissue and bones samples collected at autopsy of 591 workers. The systemic plutonium distribution was determined in healthy individuals as well as in those with health impairment, specifically for those with liver diseases. Twenty-five years after the beginning of inhalation, systemic fractions in the liver and skeleton of individuals who were healthy at the time of death approximate the ratio 45%:45% proposed in the International Commission on Radiological Protection (ICRP) Publication 30. Pathological process in the liver, accompanied by fatty dystrophy of hepatocytes, increased plutonium clearance from the liver. There was a considerable shift of the plutonium from the liver to the skeleton in individuals who died from liver disease. The average fractions of systemic plutonium in the liver and skeleton of those individuals were 14% and 78% respectively, which did not correspond to ICRP models, indicating a significant effect of disease conditions. Plutonium that was not redistributed was excreted. The urinary excretion rate of plutonium also correlated with state of health. The observed excretion as a fraction of systemic content was 1.64 x 10 -5 d -1 for individuals of good health and 2.34 x 10 -5 d -1 for individuals with various chronic diseases. The current models do not account for the influence of different pathological processes in the body on plutonium distribution and retention in systemic organs. This could have significant consequences for dosimetry calculations and risk estimations. (author)

  6. Performance of Carbon Coatings for Mitigation of Electron Cloud in the SPS

    CERN Document Server

    Yin Vallgren, C; Costa Pinto, P; Neupert, H; Rumolo, G; Shaposhnikova, E; Taborelli, M; Kato, S

    2011-01-01

    Amorphous carbon (a-C) coatings have been tested in electron cloud monitors (ECM) in the Super Proton Synchrotron (SPS) and have shown for LHC type beams a reduction of the electron cloud current by a factor 104 compared to stainless steel (StSt). This performance has been maintained for more than 3 years under SPS operation conditions. Secondary electron yield (SEY) laboratory data confirm that after more than 1 year of SPS operation, the coating maintains a SEY below 1.0. The compatibility of coexisting StSt and a-C surfaces has been studied in an ECM having coated and uncoated areas. The results show no degradation of the properties of the a-C areas. The performance of diamond like carbon (DLC) coating has also been studied. DLC shows a less effective reduction of the EC current than a-C, but conditioning is faster than for StSt. Three a-C coated dipoles were inserted in the SPS. However, even with no EC detected, the dynamic pressure rise is similar to the one observed in the StSt reference dipoles. Measu...

  7. Coldbox installation for HL-LHC crab cavity test in the SPS tunnel (BA6)

    CERN Document Server

    Ordan, Julien Marius

    2018-01-01

    The Cold-box, produced by Linde Kryotechnik for the SPS crab-cavity test stand for HL-LHC, on its arrival at CERN. It wll be transported into the tunnel in horizontal position and then will have to be tilted in its operational position, on its vertical axis, before connecting it to cryogenics lines.

  8. Dileptons and photons from central heavy-ion collisions at CERN-SPS

    CERN Document Server

    Kämpfer, B; Pavlenko, O P; Gale, C

    2002-01-01

    A unique parameterization of secondary (thermal) dilepton and photon yields in heavy-ion experiments at CERN-SPS is proposed. Adding those thermal yields to background contributions the spectral shapes of the CERES/NA45, NA38, NA50, HELIOS/3 and WA98 data from experiments with lead and sulfur beams can be well described.

  9. Kaon pseudorapidity distribution in pA and AA collisions at AGS and SPS energies

    International Nuclear Information System (INIS)

    Liu, Fuhu; Zhang, Donghai; Duan, Maiying; Allah, Nabil N. Abd

    2003-01-01

    We study systematically the kaon pseudorapidity distribution in proton-nucleus and nucleus-nucleus collisions at AGS and SPS energies within the cylinder model. The calculated results are compared and shown to be in agreement with the available experimental data. (author)

  10. The capabilities of monochromatic EC neutrino beams with the SPS upgrade

    International Nuclear Information System (INIS)

    Espinoza, C; Bernabeu, J

    2008-01-01

    The goal for future neutrino facilities is the determination of the U(e3) mixing and CP violation in neutrino oscillations. This will require precision experiments with a very intense neutrino source and energy control. With this objective in mind, the creation of monochromatic neutrino beams from the electron capture decay of boosted ions by the SPS of CERN has been proposed. We discuss the capabilities of such a facility as a function of the energy of the boost and the baseline for the detector. We conclude that the SPS upgrade to 1000 GeV is crucial to reach a better sensitivity to CP violation iff it is accompanied by a longer baseline. We compare the physics potential for two different configurations: I) γ = 90 and γ = 195 (maximum achievable at present SPS) to Frejus; II) γ = 195 and γ = 440 (maximum achievable at upgraded SPS) to Canfranc. The main conclusion is that, whereas the gain in the determination of U(e3) is rather modest, setup II provides much better sensitivity to CP violation

  11. The capabilities of monochromatic EC neutrino beams with the SPS upgrade

    Science.gov (United States)

    Espinoza, C.; Bernabéu, J.

    2008-05-01

    The goal for future neutrino facilities is the determination of the U(e3) mixing and CP violation in neutrino oscillations. This will require precision experiments with a very intense neutrino source and energy control. With this objective in mind, the creation of monochromatic neutrino beams from the electron capture decay of boosted ions by the SPS of CERN has been proposed. We discuss the capabilities of such a facility as a function of the energy of the boost and the baseline for the detector. We conclude that the SPS upgrade to 1000 GeV is crucial to reach a better sensitivity to CP violation iff it is accompanied by a longer baseline. We compare the physics potential for two different configurations: I) γ = 90 and γ = 195 (maximum achievable at present SPS) to Frejus; II) γ = 195 and γ = 440 (maximum achievable at upgraded SPS) to Canfranc. The main conclusion is that, whereas the gain in the determination of U(e3) is rather modest, setup II provides much better sensitivity to CP violation.

  12. Slow extraction at the SPS: extraction efficiency and loss reduction studies

    CERN Document Server

    Fraser, M A; Cavoto, G; Galluccio, F; Gilardoni, S; Goddard, B; Iacoangeli, F; Kain, V; Mirarchi, D; Montesano, S; Murtas, F; Petrucci, S; Redaelli, S; Roncarolo, F; Rossi, R; Scandale, W; Stoel, L S; Velott, F M

    2017-01-01

    Elevated activation levels in LSS2 were first reported dur-ing an intervention on the SPS extraction septum (ZS) inSeptember 2015. The increase was attributed to higher in-tensity Fixed Target (FT) operation and poorer extractionefficiency, and reported to the IEFC [1]. Since this eventthe awareness of the impact of slow extraction losses on theoperation and maintenance of the SPS has been heightened.This is particularly pertinent in light of tightening limits ondose to personnel and recent requests for increased intensi-ties, as well as ambitious future experimental proposals inthe North Area (NA), such as the SPS Beam Dump Facility(BDF) [2]. To follow up these issues the SPS Losses andActivation Working Group (SLAWG) was formed.The MD programme for 2016 was originally foreseen totest the faster spill on a 1.2 second flat-top for the BDF andbenchmarksimulationsoftheextractionprocess, butthiswasnot possible due to the restrictions imposed by the TIDVG.Nevertheless, during operational set-up and re-alignmentof...

  13. Multiplicity fluctuations of pions and protons at SPS energy – An in ...

    Indian Academy of Sciences (India)

    but none of them can explain all the datasets simultaneously. ... in a collision, a new parameter named as 'compound multiplicity' (nc = ng + ns ... sion plates by 32S beam with 200 A GeV incident energy at CERN SPS. ... (b) Grey particles: They are mainly fast target recoil protons with energy up to ..... occurs reverse result.

  14. Measurement and analysis of SPS kicker magnet heating and outgassing with Different Bunch Spacing

    CERN Document Server

    Barnes, M J; Cornelis, K; Ducimetière, L; Mahner, E; Papotti, G; Rumolo, G; Senaj, V; Shaposhnikova, E

    2010-01-01

    Fast kicker magnets are used to inject beam into and eject beam out of the CERN SPS accelerator ring. These kickers are generally ferrite loaded transmission line type magnets with a rectangular shaped aperture through which the beam passes. Unless special precautions are taken the impedance of the ferrite yoke can provoke significant beam induced heating, over several hours, even above the Curie temperature of the ferrite. At present the nominal bunch spacing in the SPS is 25 ns, however for an early stage of LHC operation it is preferable to have 50 ns bunch spacing. Machine Development (MD) studies have been carried out with an inter-bunch spacing of 25 ns, 50 ns or 75 ns. For some of the SPS kicker magnets the 75 ns bunch spacing resulted in considerable beam induced heating. In addition the MDs showed that 50 ns bunch spacing could result in a very rapid pressure rise in the kicker magnet and thus cause an interlock. This paper discusses the MD observations of the SPS kickers and analyses the available d...

  15. Physics at the AD/PS/SPS - PLEASE NOTE CHANGE OF ROOM!(2/4)

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Lecture 2: QCD and hadron physics: COMPASS, NA61, DIRAC The lecture will discuss the research done at the COMPASS, SHINE and DIRAC experiments at the SPS and PS. COMPASS studies nucleon structure and hadron spectroscopy, SHINE searches for the critical point and onset of deconfinement in heavy ion collisions while DIRAC studies the pi-pi scattering length in pionic atoms.

  16. The Lead Ion accelerating facility and the relative experimental program at CERN SPS fixed target

    International Nuclear Information System (INIS)

    Riccati, L.

    1995-01-01

    The status of the lead beam construction and commissioning is reviewed. A very wide experimental program with heavy nuclei was approved at the CERN SPS for a dedicated study of ultrarelativistic nucleus-nucleus collisions. An arbitrary and very short summary of the advantages and motivations for the use of heavier nuclei in the quark-gluon plasma search will be presented. ((orig.))

  17. The scenario-based system of workers training to prevent accidents during decommissioning of nuclear facilities

    International Nuclear Information System (INIS)

    Jeong, KwanSeong; Choi, ByungSeon; Moon, JeiKwon; Hyun, DongJun; Lee, JongHwan; Kim, IkJune; Kim, GeunHo; Seo, JaeSeok

    2014-01-01

    Highlights: • This paper is meant to develop the training system to prevent accidents during decommissioning of nuclear facilities. • Requirements of the system were suggested. • Data management modules of the system were designed. • The system was developed on virtual reality environment. - Abstract: This paper is meant to develop the training system to prevent accidents during decommissioning of nuclear facilities. Requirements of the system were suggested. Data management modules of the system were designed. The system was developed on virtual reality environment. The performance test of the system was proved to be appropriate to decommissioning of nuclear facilities

  18. Assessment of zero gravity effects on space worker health and safety

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    One objective of the study is to assess the effects of all currently known deviations from normal of medical, physiological, and biochemical parameters which appear to be due to zero gravity (zero-g) environment and to acceleration and deceleration to be experienced, as outlined in the reference Solar Power Satellite (SPS) design, by space worker. Study results include identification of possible health or safety effects on space workers - either immediate or delayed - due to the zero gravity environment and acceleration and deceleration; estimation of the probability that an individual will be adversely affected; description of the possible consequence to work efficiently in persons adversely affected; and description of the possible/probable consequences to immediate and future health of individuals exposed to this environment. A research plan, which addresses the uncertainties in current knowledge regarding the health and safety hazards to exposed SPS space workers, is presented. Although most adverse affects experienced during space flight soon disappeared upon return to the Earth's environment, there remains a definite concern for the long-term effects to SPS space workers who might spend as much as half their time in space during a possible five-year career period. The proposed 90-day up/90 day down cycle, coupled with the fact that most of the effects of weightlessness may persist throughout the flight along with the realization that recovery may occupy much of the terrestrial stay, may keep the SPS workers in a deviant physical condition or state of flux for 60 to 100% of their five-year career. (JGB)

  19. Assessment of zero gravity effects on space worker health and safety

    Science.gov (United States)

    1980-01-01

    One objective of the study is to assess the effects of all currently known deviations from normal of medical, physiological, and biochemical parameters which appear to be due to zero gravity (zero-g) environment and to acceleration and deceleration to be experienced, as outlined in the references Solar Power Satellites (SPS) design, by space worker. Study results include identification of possible health or safety effects on space workers either immediate or delayed due to the zero gravity environment and acceleration and deceleration; estimation of the probability that an individual will be adversely affected; description of the possible consequence to work efficiency in persons adversely affected; and description of the possible/probable consequences to immediate and future health of individuals exposed to this environment. A research plan, which addresses the uncertainties in current knowledge regarding the health and safety hazards to exposed SPS space workers, is presented. Although most adverse affects experienced during space flight soon disappeared upon return to the Earth's environment, there remains a definite concern for the long-term effects to SPS space workers who might spend as much as half their time in space during a possible five year career period. The proposed 90 day up/90 day down cycle, coupled with the fact that most of the effects of weightlessness may persist throughout the flight along with the realization that recovery may occupy much of the terrestrial stay, may keep the SPS workers in a deviant physical condition or state of flux for 60 to 100% of their five year career.

  20. Health worker posting and transfer at primary level in Tamil Nadu: Governance of a complex health system function

    Directory of Open Access Journals (Sweden)

    Surekha Garimella

    2016-01-01

    Full Text Available Background: Posting and transfer (PT of health personnel - placing the right health workers in the right place at the right time - is a core function of any large-scale health service. In the context of government health services, this may be seen as a simple process of bureaucratic governance and implementation of the rule of law. However the literature from India and comparable low and middle-income country health systems suggests that in reality PT is a contested domain, driven by varied expressions of private and public interest throughout the chain of implementation. Objective: To investigate policymaking for PT in the government health sector and implementation of policies as experienced by different health system actors and stakeholders at primary health care level. Methodology: We undertook an empirical case study of a PT reform policy at primary health care level in Tamil Nadu State, to understand how different groups of health systems actors experience PT. In-depth qualitative methods were undertaken to study processes of implementation of PT policies enacted through ′counselling′ of health workers (individualized consultations to determine postings and transfers. Results: PT emerges as a complex phenomenon, shaped partially by the laws of the state and partially as a parallel system of norms and incentives requiring consideration and coordination of the interests of different groups. Micro-practices of governance represent homegrown coping mechanisms of health administrators that reconcile public and private interests and sustain basic health system functions. Beyond a functional perspective of PT, it also reflects justice and fairness as it plays out in the health system. It signifies how well a system treats its employees, and by inference, is an index of the overall health of the system. Conclusions: For a complex governance function such as PT, the roles of private actors and private interests are not easily separable from the

  1. Kaon and open charm production in central lead-lead collisions at the CERN SPS

    Science.gov (United States)

    van Leeuwen, Marco

    2003-05-01

    This thesis describes the experimental study of hadronic systems with a very high energy density and temperature. From theoretical caluclations it is expected that hadronic matter undergoes a phase transition to a deconfined state at an energy density of about 1 GeV/fm^3 or a temperature of 170 MeV. The goal of the experiments is to observe the phase transition and study the properties of the deconfined state, the Quark Gluon Plasma (QGP). Two different measurements are described and the results are discussed. The first measurement concerns the momentum distributions and total yields of kaons in lead-lead collisions at 40, 80 and 158 AGeV beam energy. Kaons are the most abundant carrier of the relatively heavy strange quarks and their production is expected to be sensitive to the energy density and the state of matter early in the collision. The second measurement is a search for the production of mesons which carry the even heavier charm quark, at the highest beam energy. The measurements have been performed with the NA49 detector at the SPS accelerator at CERN. The main detector elements are four Time Projection Chambers (TPCs), which record the trajectories of a large fraction of the final state particles to determine the charge and the momentum of each particle. In addition, the measurement of the ionisation energy loss dE/dx in the TPCs allows to identify pions, kaons and protons. Additional detectors provide a measurement of the time-of-flight in a limited acceptance. Combining the time-of-flight and dE/dx measurements greatly improves the separation of the different particle species. The kaon momentum distributions as presented in this thesis have been determined using the dE/dx measurement in the TPCs. The time-of-flight information is used for a detailed study of the peak shape of the dE/dx measurement. The resulting kaon spectra and total yields provide strong indications that interactions between produced particles or even thermalisation play an

  2. The new German regulatory system of monitoring workers for intakes of radioactivity with special reference to thorium

    International Nuclear Information System (INIS)

    Henrichs, K.

    1995-01-01

    In Germany, the Association for Radiation Protection (member of IRPA) defined a new standard for the monitoring of workers occupationally exposed to radioactive material. During the last two years this draft has been accepted by the German government in the form of three directives. The purpose of our approach was the installation of a system defining clear criteria for the necessity of regular and special monitoring programs, giving directives for monitoring programs ensuring that dose assessments are as reliable as necessary with the lowest possible expenses, standardizing as far as possible the procedures of dose assessments, and guaranteeing the necessary quality standards. The most important features of these regulations will be discussed in this contribution and their application will be exemplified for the specially difficult monitoring of thorium intakes. (author). 2 figs., 2 tabs

  3. Comparison of systemic burdens at autopsy to estimates based on health physics data for selected plutonium workers

    International Nuclear Information System (INIS)

    Heid, K.R.

    1981-09-01

    Monitoring the intake of plutonium by workers is a vital but difficult function that must be performed by a health physicist or someone responsible for the radiation protection of the worker. This is normally accomplished in part by monitoring the work environment (especialy the airborne concentration) to which a worker is or may be exposed. Because there is no assurance that the air sampled is the same as that inhaled by the worker, supplemental monitoring such as contamination surveys of the work area surfaces and of the worker himself are routinely performed. Surveys of the worker may include contamination surveys of skin and protective clothing, especially the gloves worn; nasal smears at the completion of the work; hand and shoe surveys when leaving the work area; and routine surveillance in the form of in vivo measurements of the chest burden and/or the collection of excreta samples which are processed for plutonium content

  4. [Adverse events self-declaration system and influenza vaccination coverage of healthcare workers in a tertiary hospital].

    Science.gov (United States)

    Velasco Munoz, Cesar; Sequera, Víctor-Guillermo; Vilajeliu, Alba; Aldea, Marta; Mena, Guillermo; Quesada, Sebastiana; Varela, Pilar; Olivé, Victoria; Bayas, José M; Trilla, Antoni

    2016-02-19

    During the influenza vaccination campaign 2011-2012 we established a self-declaration system of adverse events (AEs) in healthcare workers (HCW). The aim of this study is to describe the vaccinated population and analyse vaccination coverage and self-declared AEs after the voluntary flu vaccination in a university hospital in Barcelona. Observational study. We used the HCW immunization record to calculate the vaccination coverage. We collected AEs using a voluntary, anonymous, self-administered survey during the 2011-2012 flu vaccination campaign. We performed a logistic regression model to determine the associated factors to declare AEs. The influenza vaccination coverage in HCW was 30.5% (n=1,507/4,944). We received completed surveys from 358 vaccinated HCW (23.8% of all vaccinated). We registered AEs in 186 respondents to the survey (52.0% of all respondents). Of these, 75.3% (n=140) reported local symptoms after the flu vaccination, 9.7% (n=18) reported systemic symptoms and 15.1% (n=28) both local and systemic symptoms. No serious AEs were self-reported. Female sex and aged under 35 were both factors associated with declaring AEs. Our self-reporting system did not register serious AEs in HCW, resulting in an opportunity to improve HCW trust in flu vaccination. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

  5. The role of human-at-work systems in business sustainability: perspectives based on expert and qualified production workers in a manufacturing enterprise.

    Science.gov (United States)

    Genaidy, Ash M; Rinder, Maria M; Sequeira, Reynold; A-Rehim, Amal

    2010-04-01

    and enterprise levels, in terms of organisational/social/technological environment. This is particularly noted for the organisational environment. The compatibility values obtained for the experienced domains mirror those obtained for acting domains. The overall workload was assessed as requiring major redesign during the day shift and needing added responsibilities for the night shift according to both expert and qualified workers. The assessment of qualified workers is comparable with that of expert workers for the job content and immediate surroundings. Differences are more observed for process- and enterprise-based factors; thereby, providing company management different perspectives in order to devise organisational strategies conducive for optimum human and corporate health and pointing to the probable interactions of the different systems impacting individual and enterprise performance. STATEMENT OF RELEVANCE: This research examines similarities and differences between qualified and expert workers in their assessment of the worker-work environment interface. The contribution to improved understanding of the complex interactions of human-at-work and enterprise systems should be beneficial to organisations in their quest to remain competitive in a global economy.

  6. Shallow gas incident in 3-ELPS-15D-SPS well; Incidente com shallow gas no poco 3-ELPS-15D-SPS

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Rubens Fausto [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil)

    2004-07-01

    One of the concerns during the planning phase of an exploratory offshore well drilling is the possibility of occurrence of a shallow gas accumulation. In spite of being a rare event, taking into account that an event like this can have disastrous consequences, the cares to work with that type of incident cannot be despised. As example, in 2003, during the operations in the extension well 3-ELPS-15D-SPS, it happened the uncontrolled influx of water and gas to the bottom of the sea: the annular space between the 30'' and 13 3/8'' casings was not filled out with cement, allowing the flow from a shallow permeable interval to the bottom of the sea through the wellhead's cement return orifices, generating the need of an corrective action to make the abandonment of the well in accordance with the Regulation of Abandonment of Wells existent in Brazil. This work presents the mechanical conditions of the interval close to the wet wellhead of the 3-ELPS-15D-SPS, enumerating the sequence of operations accomplished to solve the problem. (author)

  7. Diagnostics of hand-arm system disorders in workers who use vibrating tools.

    Science.gov (United States)

    Gemne, G

    1997-02-01

    A hand-arm vibration syndrome occurs in some workers who use hand held vibrating tools. It is recognised to consist of white fingers, diffusely distributed finger neuropathy, pain in the arm and hand, and a small excess risk of osteoarthrosis from percussion to the wrist and elbow. Carpal tunnel syndrome is mainly due to ergonomic factors other than vibration, but certain factors related to vibration may contribute to its development. A decrease in muscle power induced by vibration, and excessive hearing deficit have been postulated. The assessment of a disorder suspected of being induced by vibration includes deciding whether there is a disorder and, if so, whether the symptoms can be caused by vibration. To decide whether the symptoms can be caused by vibration epidemiological documentation and pathogenically reasonable theories must exist. A causal diagnosis finally requires and epidemiological decision whether or not the factual exposure has elicited the patient's symptoms. Epidemiological data on the quantitative association between vibration and excessive risks of white fingers and diffusely distributed neuropathy are incomplete. The symptomatic diagnosis of white fingers is still mainly based on anamnestic information. Available laboratory tests are incapable of grading the severity of individual cases. Recording the finger systolic blood pressure during cold provocation is a method of symptomatic diagnosis with reasonable levels of specificity, sensitivity, and predictive value. For diffusely distributed neuropathy these levels are lower than desired. Electrodiagnostic tests for carpal tunnel syndrome have sufficient validity. Proper exposure evaluation must be based on an appreciation of the character of the vibration as well as effective duration and intermittency. If this is not taken into account, the number of hours of exposure and intensity of vibration are likely to be non-commensurable variables, and the simple product of them is a questionable dose

  8. Resilience Management System And Development Of Resilience Capability On Site Workers

    OpenAIRE

    Komatsubara, Akinori

    2013-01-01

    When we consider the safety of socio-technical or safety critical systems, discussions from three layers are required; safety strategy, safety management and safety activity. In this study, development of resilience safety from the three layers is discussed. For the safety management layer, this study proposes resilience management system (RMS) as the style of safety management system (SMS) for resilience safety approach. Two cases at Japanese companies to enhance attitude and non-technical s...

  9. How dense does parton matter get in Pb + Pb collisions at the CERN SPS?

    International Nuclear Information System (INIS)

    Geiger, K.; Mueller, B.

    1998-01-01

    The qualitative features of parton production through materialization in heavy-ion collisions are examined within perturbative QCD, and the magnitude of the resulting parton density created during the early stage of the collisions is estimated. The implications for 'anomalous' J/ψ suppression observed in Pb + Pb collisions at the CERN SPS are discussed. The A-dependence of absorption of J/ψ by (partonic) comovers is steeper than assumed in most phenomenological models, because the absorption process is dominated by quasi-perturbative QCD interactions. The argument is supported by results recently obtained in the framework of the parton cascade model. Significant 'anomalous' suppression for Pb + Pb collisions at the CERN-SPS are predicted, but not for S + U collisions. (author)

  10. Expression, purification and preliminary crystallographic analysis of sucrose phosphate synthase (SPS) from Halothermothrix orenii

    International Nuclear Information System (INIS)

    Huynh, Frederick; Tan, Tien-Chye; Swaminathan, Kunchithapadam; Patel, Bharat K. C.

    2004-01-01

    The first crystallographic study of a sucrose phosphate synthase from H. orenii, an organism that is both thermophilic and halophilic, is reported. The protein crystal diffracts X-rays to 3.01 Å. This is the first report of the crystallization of a sucrose phosphate synthase (SPS; EC 2.4.1.14). It also constitutes the first study of a sucrose phosphate synthase from a non-photosynthetic thermohalophilic anaerobic bacterium, Halothermothrix orenii. The purified recombinant spsA protein has been crystallized in the monoclinic space group C2, with unit-cell parameters a = 154.2, b = 47.9, c = 72.3 Å, β = 103.16°, using the hanging-drop vapour-diffusion method. The crystal diffracts X-rays to a resolution limit of 3.01 Å. Heavy-metal and halide-soaking trials are currently in progress to solve the structure

  11. Beam Transfer Line Design for a Plasma Wakefield Acceleration Experiment (AWAKE) at the CERN SPS

    CERN Document Server

    Bracco, C; Brethoux, D; Clerc, V; Goddard, B; Gschwendtner, E; Jensen, L K; Kosmicki, A; Le Godec, G; Meddahi, M; Muggli, P; Mutin, C; Osborne, O; Papastergiou, K; Pardons, A; Velotti, F M; Vincke, H

    2013-01-01

    The world’s first proton driven plasma wakefield acceleration experiment (AWAKE) is presently being studied at CERN. The experimentwill use a high energy proton beam extracted from the SPS as driver. Two possible locations for installing the AWAKE facility were considered: the West Area and the CNGS beam line. The previous transfer line from the SPS to the West Area was completely dismantled in 2005 and would need to be fully re-designed and re-built. For this option, geometric constraints for radiation protection reasons would limit the maximum proton beam energy to 300 GeV. The existing CNGS line could be used by applying only minor changes to the lattice for the final focusing and the interface between the proton beam and the laser, required for plasma ionisation and bunch-modulation seeding. The beam line design studies performed for the two options are presented.

  12. Angelo State SPS Marsh White Award: Physics After School Special (P.A.S.S.)

    Science.gov (United States)

    Desai, Vikesh; Sauncy, Toni

    2012-03-01

    With a recent Marsh White Award from the SPS National Office, the Angelo State SPS has teamed up with a local YMCA after school program to provide fun lab experiences for the diverse group of K-3^rd graders. Several undergraduate presenters are involved, and the funding was used to purchase tshirts for all participants. The afterschool group of approximately 30 children has visited the campus for the first lab session and plans three additional hands on lab experiences over the course of the semester. For the final visit, the Peer Pressure Team will conduct a full demonstration show and P.A.S.S. Party. The goal of this public engagement is to motivate these young students to learn more about physics with hands on activities in a fun and safe environment and to establish meaningful mentoring relationships between undergraduate physics majors and younger students.

  13. Report from the NA61/SHINE experiment at the CERN SPS

    CERN Document Server

    Abgrall, N; Andrieu, B; Anticic, T; Antoniou, N; Asryan, A; Baatar, B; Blondel, A; Blumer, J; Boldizsar, L; Bravar, A; Brzychczyk, J; Bunyatov, S; Choi, K-U; Christakoglou, P; Chung, P; Cleymans, J; Derkach, D; Diakonos, F; Dominik, Wojciech; Dumarchez, J; Engel, R; Ereditato, A; Feofilov, G; Fodor, Z; Gazdzicki, M; Golubeva, M; Grebieszkow, K; Guber, F; Hasegawa, T; Haungs, A; Hess, M; Igolkin, S; Ivanov, A; Ivashkin, A; Kadija, K; Katrynska, N; Kielczewska, D; Kikola, D; Kim, J-H; Kobayashi, T; Kolesnikov, V; Kolev, D; Kolevatov, R; Kondratiev, V; Kurepin, A; Lacey, R; Laszlo, A; Lehmann, S; Lungwitz, B; Lyubushkin, V; Maevskaya, A; Majka, Z; Malakhov, A; Marchionni, A; Marcinek, A; Di Marco, M; Matveev, V; Melkumov, G; Meregaglia, A; Messina, M; Meurer, C; Mijakowski, P; Mitrovski, M; Mrówczynski, S; Murphy, S; Nakadaira, T; Naumenko, P; Nikolic, V; Nishikawa, K; Palczewski, T; Pálla, G; Panagiotou, A; Peryt, W; Petridis, A; Planeta, R; Pluta, J; Popov, B; Posiadala, M; Przewlocki, P; Rauch, W; Ravonel, M; Renfordt, R; Röhrich, D; Rondio, E; Rossi, B; Roth, M; Rubbia, André; Rybczynski, M; Sadovskii, A; Sakashita, K; Schuster, T; Sekiguchi, T; Seyboth, P; Shileev, K; Sisakian, A; Skrzypczak, E; Slodkowski, M; Sorin, A; Staszel, P; Stefanek, G; Stepaniak, J; Strabel, C; Ströbele, H; Susa, T; Szentpétery, I; Szuba, M; Taranenko, A; Tsenov, R; Unger, M; Vassiliou, M; Vechernin, V; Vesztergombi, G; Wlodarczyk, Z; Wojtaszek, A; Yi, J-G; Yoo, I-K

    2008-01-01

    The physics program of the NA61/SHINE (SHINE = SPS Heavy Ion and Neutrino Experiment) experiment at the CERN SPS consists of three subjects. In the first stage of data taking (2007-2008) the measurements of hadron production in hadron-nucleus interactions needed for neutrino (T2K) and cosmic-ray (Pierre Auger and KASCADE) experiments will be performed. In the second stage (2008-2010) hadron production in proton-proton and proton-nucleus interactions needed as a reference data for better understanding of nucleus-nucleus reactions will be studied. In the third stage (2010-2012) hadron production will be measured in nucleus-nucleus collisions, with the aim to identify the properties of the onset of deconfinement and find evidence for the critical point of strongly interacting matter. The experiment was approved at CERN in June 2007. The first pilot run was performed during October 2007. We report here first results from this run.

  14. TMCI thresholds for LHC single bunches in the CERN SPS and comparison with simulations

    CERN Document Server

    Bartosik, H; Papaphilippou, Y; Rumolo, G; Salvant, B; Zannini, C

    2014-01-01

    At the beginning of 2013 an extensive measurement campaign was carried out at the SPS in order to determine the Transverse Mode Coupling Instability thresholds of LHC-type bunches in a wide range of intensities and longitudinal emittances. The measurements were performed in two different configurations of machine optics (nominal and low gamma transition) with the goal to characterize the differences in behavior and performance. The purpose of this paper is to describe in detail the measurement procedure and results, as well as the comparison of the experimental data with HEADTAIL simulations based on the latest SPS impedance model. Beside the impedances of the resistive wall, the beam position monitors (BPMs), the RF cavities, and the flanges, an advanced model of the impedance of the kicker magnets is included, which are found to play a major role in the definition of the stability region of the LHC-type bunches in the two optics configurations studied.

  15. Implementation of Carbon Thin Film Coatings in the Super Proton Synchrotron (SPS) for Electron Cloud Mitigation

    CERN Document Server

    Costa Pinto, P; Basso, T; Edwards, P; Mensi, M; Sublet, A; Taborelli, M

    2014-01-01

    Low Secondary Electron Yield (SEY) carbon thin films eradicate electron multipacting in accelerator beam pipes. Two magnetic cells of the SPS were coated with such material and installed. In total more than forty vacuum vessels and magnet interconnections were treated. The feasibility of the coating process was validated. The performance of the carbon thin film will be tested with LHC nominal beams after the end of the long shutdown 1. Particular attention will be drawn to the long term behaviour. This paper presents the sputtering techniques used to coat the different components; their characterization (SEY measurements on coupons, RF multipacting tests and pump down curves); and the technology to etch the carbon film in case of a faulty coating. The strategy to coat the entire SPS will also be described.

  16. Implementation of an electronic fingerprint-linked data collection system: a feasibility and acceptability study among Zambian female sex workers.

    Science.gov (United States)

    Wall, Kristin M; Kilembe, William; Inambao, Mubiana; Chen, Yi No; Mchoongo, Mwaka; Kimaru, Linda; Hammond, Yuna Tiffany; Sharkey, Tyronza; Malama, Kalonde; Fulton, T Roice; Tran, Alex; Halumamba, Hanzunga; Anderson, Sarah; Kishore, Nishant; Sarwar, Shawn; Finnegan, Trisha; Mark, David; Allen, Susan A

    2015-06-27

    Patient identification within and between health services is an operational challenge in many resource-limited settings. When following HIV risk groups for service provision and in the context of vaccine trials, patient misidentification can harm patient care and bias trial outcomes. Electronic fingerprinting has been proposed to identify patients over time and link patient data between health services. The objective of this study was to determine 1) the feasibility of implementing an electronic-fingerprint linked data capture system in Zambia and 2) the acceptability of this system among a key HIV risk group: female sex workers (FSWs). Working with Biometrac, a US-based company providing biometric-linked healthcare platforms, an electronic fingerprint-linked data capture system was developed for use by field recruiters among Zambian FSWs. We evaluated the technical feasibility of the system for use in the field in Zambia and conducted a pilot study to determine the acceptability of the system, as well as barriers to uptake, among FSWs. We found that implementation of an electronic fingerprint-linked patient tracking and data collection system was feasible in this relatively resource-limited setting (false fingerprint matching rate of 1/1000 and false rejection rate of lodges) could be addressed by recruiting women during less busy hours, in their own homes, in the presence of "Queen Mothers" (FSW organizers), or in the presence of a FSW that has already been fingerprinted. Our findings have major implications for key population research and improved health services provision. However, more work needs to be done to increase the acceptability of the electronic fingerprint-linked data capture system during field recruitment. This study indicated several potential avenues that will be explored to increase acceptability.

  17. Performance Evaluation of the Myrias SPS-2 Computer

    National Research Council Canada - National Science Library

    McBryan, Oliver A; Pozo, Roldan

    1990-01-01

    .... The highlight of the software environment is the virtual shared memory environment. We have analyzed the performance of the shared memory environment by studying system efficiency as a function of both number of processors in use and of paging activity...

  18. Assessing the effects of customer innovativeness, environmental value and ecological lifestyles on residential solar power systems install intention

    International Nuclear Information System (INIS)

    Chen, Kee Kuo

    2014-01-01

    To understand the impact of environmental value, ecological lifestyle, customer innovativeness on customer intention to install solar power system (SPS) in their private houses, an empirical model was proposed. Customer innovativeness was treated as a second-order construct with two first-order dimensions, with each of the latter being measured by means of reflective indicators. Using structural equation modeling, data collected from 203 college students and faculties at a University of Taiwan were tested against the model. We found that environmental value has a positive impact on ecological lifestyle and SPS install intention. Although ecological lifestyle associates positively with SPS install intention, the effect disappears when environmental value is included in the model. The effect of customer innovativeness on SPS install intention results from the tendency of customer novelty seeking, while the impact of customer independent judgment-making on SPS install intention is insignificant. The model explained 76% of the total variations within SPS install intention. Managerial implications for promoting of SPS are considered, and suggestions for further research provided. - Highlights: • We integrate customer innovativeness into an environmental behavior model. • The impact of customer innovativeness on SPS install intention was confirmed. • The impact of novelty seeking on SPS install intention has been found. • Environmental value is the most important factor for SPS install intention. • The model explained 76% of the total variations within SPS install intention

  19. Excavation of the SPS tunnel (view of a section prior to lining by a concrete shell)

    CERN Multimedia

    1974-01-01

    The SPS ring (6911 m in circumference) is housed at a depth of 40 m (average) under the surface. The tunnel with an overall cross-sectional diameter of 4.8 m was drilled by big tunnelling machines (see 7406022X, 7406027X) into the molasse rock present in the Geneva basin. After the passage of the tunnelling machine the tunnel walls were lined with a concrete layer of about 30cm thickness.

  20. Nine years of carbon coating development for the SPS upgrade: achievements and heritage.

    CERN Document Server

    Taborelli, Mauro; Costa Pinto, Pedro; Cruikshank, Paul

    2015-01-01

    CERN has succeeded in producing carbon coatings that eradicate electron cloud in accelerators without any beam conditioning or in situ heating. Investing about 1 MCHF and dedicating 31 FTE (28 man-years, staff and associate members) in 9 years in the framework of LIU-SPS, CERN has increased: technological competences in thin-film coatings, worldwide visibility in surface characterisation, and capability in electron cloud measurement. Future projects are still benefiting from such an investment.

  1. High density matter in AGS, SPS and RHIC collisions: Proceedings. Volume 9

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This 1-day workshop focused on phenomenological models regarding the specific question of the maximum energy density achievable in collisions at AGS, SPS and RHIC. The idea was to have 30-minute (or less) presentations of each model--but not the model as a whole, rather then that strongly narrowed to the above physics question. The key topics addressed were: (1) to estimate the energy density in heavy-ion collisions within a model, and to discuss its physical implications; (2) to suggest experimental observables that may confirm the correctness of a model approach--with respect to the energy density estimate; (3) to compare with existing data from AGS and SPS heavy-ion collisions, and to give predictions for the future RHIC experiments. G. Ogilvie started up the workshop with a critical summary of experimental manifestations of high-density matter at the AGS, and gave a personal outlook on RHIC physics. R. Mattiello talked about his newly developed hadron cascade model for applications to AGS and SPS collisions. Next, D. Kharzeev gave a nice introduction of the Glauber approach to high-energy collisions and illustrated the predictive power of this approach in nucleus-nucleus collisions at the SPS. It followed S. Vance with a presentation of the baryon-junction model to explain the observed baryon stopping phenomenon in collisions of heavy nuclei. S. Bass continued with a broad perspective of the UrQMD model, and provided insight into the details of the microscopic dynamical features of nuclear collisions at high energy. J. Sandweiss and J. Kapusta addressed the interesting aspect of photon production in peripherical nuclear collisions due to intense electromagnetic bremstrahlung by the highly charged, fast moving ions. Finally, H. Sorge closed up the one-day workshop with a presentation of his recent work with the RQMD model. This report consists of a summary and vugraphs of the presentations.

  2. Was a new phase of nuclear matter observed at CERN SPS...?

    International Nuclear Information System (INIS)

    Odyniec, G.

    2001-01-01

    The enhanced production of strange particles, that was predicted as a consequence of the formation of quark-gluon plasma, was observed in CERN SPS heavy ion experiments. As data matured, the emphasis on theory and interpretation of experimental results has increased. In this presentation the hadronic yields and their ratios, as well as the role of strangeness production in the search for a new phase of matter, in both experiment and theory, are discussed. (author)

  3. High density matter in AGS, SPS and RHIC collisions. Proceedings. Volume 9

    International Nuclear Information System (INIS)

    1998-01-01

    This 1-day workshop focused on phenomenological models regarding the specific question of the maximum energy density achievable in collisions at AGS, SPS and RHIC. The idea was to have 30-minute (or less) presentations of each model--but not the model as a whole, rather then that strongly narrowed to the above physics question. The key topics addressed were: (1) to estimate the energy density in heavy-ion collisions within a model, and to discuss its physical implications; (2) to suggest experimental observables that may confirm the correctness of a model approach--with respect to the energy density estimate; (3) to compare with existing data from AGS and SPS heavy-ion collisions, and to give predictions for the future RHIC experiments. G. Ogilvie started up the workshop with a critical summary of experimental manifestations of high-density matter at the AGS, and gave a personal outlook on RHIC physics. R. Mattiello talked about his newly developed hadron cascade model for applications to AGS and SPS collisions. Next, D. Kharzeev gave a nice introduction of the Glauber approach to high-energy collisions and illustrated the predictive power of this approach in nucleus-nucleus collisions at the SPS. It followed S. Vance with a presentation of the baryon-junction model to explain the observed baryon stopping phenomenon in collisions of heavy nuclei. S. Bass continued with a broad perspective of the UrQMD model, and provided insight into the details of the microscopic dynamical features of nuclear collisions at high energy. J. Sandweiss and J. Kapusta addressed the interesting aspect of photon production in peripherical nuclear collisions due to intense electromagnetic bremstrahlung by the highly charged, fast moving ions. Finally, H. Sorge closed up the one-day workshop with a presentation of his recent work with the RQMD model. This report consists of a summary and vugraphs of the presentations

  4. The PS Booster, PS and SPS Magnets for the next 25 years

    CERN Document Server

    Tommasini, D

    2010-01-01

    This note provides information and analysis on the present status of the magnets installed in the CERN Proton Synchrotron Booster (PSB), the Proton Synchrotron (PS) and the Super Proton Synchrotron (SPS) in view of their possible operation for the next 25 years. The note does not cover the magnets installed in the transfer lines, neither it covers the fast injection/extraction magnets (septa and kickers).

  5. Hyperon production at the CERN SPS:results from the NA57 experiment

    Czech Academy of Sciences Publication Activity Database

    Antinori, F.; Bacon, P. A.; Badala, A.; Staroba, Pavel; Závada, Petr

    2004-01-01

    Roč. 30, - (2004), S129-S138 ISSN 0954-3899 Institutional research plan: CEZ:AV0Z1010920 Keywords : ultra-relativistic heavy-ion beams * CERN SPS * hadronic matter * energy density * colour deconfined state of matter * Pb-Pb collisions at 160 A GeV/c * mid-rapidity * strangeness enhancment Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 1.533, year: 2004

  6. Electron-cloud simulation results for the SPS and recent results for the LHC

    International Nuclear Information System (INIS)

    Furman, M.A.; Pivi, M.T.F.

    2002-01-01

    We present an update of computer simulation results for some features of the electron cloud at the Large Hadron Collider (LHC) and recent simulation results for the Super Proton Synchrotron (SPS). We focus on the sensitivity of the power deposition on the LHC beam screen to the emitted electron spectrum, which we study by means of a refined secondary electron (SE) emission model recently included in our simulation code

  7. Experimental results concerning global observables from the CERN SPS heavy ion program

    International Nuclear Information System (INIS)

    Young, G.R.

    1990-06-01

    A brief overview is given of experimental results obtained during the initial operation of the heavy-ion program at the CERN SPS during the period 1986--1988. This paper confines itself to a presentation of results on so-called global observables, such as energy flow and multiplicity distributions, and on information extracted from them. Of particular interest among the latter are an estimate of the magnitude and spatial distribution of the energy density attained. 3 refs., 27 figs

  8. The Impact of the Availability of Resources, the Allocation of Buffers and Number of Workers on the Effectiveness of an Assembly Manufacturing System

    OpenAIRE

    Kłos Sławomir; Trebuna Peter

    2017-01-01

    This paper proposes the application of computer simulation methods in order to analyse the availability of resources, buffers and the impact of the allocation of workers on the throughput and work-in-progress of a manufacturing system. The simulation model of the production system is based on an existing example of a manufacturing company in the automotive industry. The manufacturing system includes both machining and assembly operations. Simulation experiments were conducted vis-à-vis the av...

  9. Raising Job Quality and Skills for American Workers: Creating More-Effective Education and Workforce Development Systems in the States. Discussion Paper 2011-10

    Science.gov (United States)

    Holzer, Harry J.

    2011-01-01

    To improve the employment rates and earnings of Americans workers, we need to create more-coherent and more-effective education and workforce development systems, focusing primarily (though not exclusively) on disadvantaged youth and adults, and with education and training more clearly targeted towards firms and sectors that provide good-paying…

  10. Work Systems, Quality of Working Life and Attitudes of Workers: An Empirical Study towards the Effects of Team and Non-teamwork.

    Science.gov (United States)

    Steijn, Bram

    2001-01-01

    Four types of work organization--Taylorism, lean teamwork, sociotechnical teamwork, and professional work systems--were studied in a survey of 835 Dutch workers. Taylorism had detrimental effects on well-being, autonomy, stress, job satisfaction, and work commitment. Either type of teamwork or substantial professional autonomy had positive…

  11. Community health workers' experiences of mobile device-enabled clinical decision support systems for maternal, newborn and child health in developing countries: a qualitative systematic review protocol.

    Science.gov (United States)

    Dzabeng, Francis; Enuameh, Yeetey; Adjei, George; Manu, Grace; Asante, Kwaku Poku; Owusu-Agyei, Seth

    2016-09-01

    The objective of this review is to synthesize evidence on the experiences of community health workers (CHWs) of mobile device-enabled clinical decision support systems (CDSSs) interventions designed to support maternal newborn and child health (MNCH) in low-and middle-income countries.Specific objectives.

  12. 75 FR 38127 - Visteon Systems, LLC North Penn Plant Electronics Products Group Including On-Site Leased Workers...

    Science.gov (United States)

    2010-07-01

    ..., North Penn Plant, Electronics Products Group to be covered by this certification. The intent of the... North Penn Plant Electronics Products Group Including On-Site Leased Workers From Ryder Integrated... Certification Regarding Eligibility To Apply for Worker Adjustment Assistance and Alternative Trade Adjustment...

  13. SHiP: a new multipurpose beam-dump experiment at the SPS.

    CERN Document Server

    AUTHOR|(SzGeCERN)387671

    2016-01-01

    SHiP is an experiment to look for very weakly interacting particles at a new to be constructed beam-dum p facility at the CERN SPS. The SHiP Technical Proposal has been submitted to the CERN SPS Committee in April 2015. The 400 GeV/c proton beam extracted from the SPS will be dumped on a heavy target with the aim of integ rating $2\\times 10^{20}$ proton on target in five years. A detector located downstream of the target, based on a long vacuum tank followed by a spectrometer and particle identification detectors, will allow probing a variety of models with light long-lived exotic particles and masses below a few GeV/c$^2$. The main focus will be the physics of the so-called Hidden Portals, i.e. search for Dark Photons, Light scalars and pseudo-scalars, and Heavy Neutral Leptons (HNL). The sensitivity to HNL will allow for the first time to probe, in the mass range between the kaon and the charm meson mass, a coupling range for which Baryogenesis and active neutrino masses could also be explained...

  14. Social anxiety in the general population: introducing abbreviated versions of SIAS and SPS.

    Science.gov (United States)

    Kupper, Nina; Denollet, Johan

    2012-01-01

    Social anxiety is characterized by the experience of stress, discomfort and fear in social situations, and is associated with substantial personal and societal burden. Two questionnaires exist that assess the aspects of social anxiety, i.e. social interaction anxiety (SIAS) and social phobia (SPS). There is no agreement in literature on the dimensionality of social anxiety. Further, the length of a questionnaire may negatively affect response rates and participation at follow-up occasions. To explore the structure of social anxiety in the general population, and to examine psychosocial and sociodemographic correlates. Our second aim was to construct abbreviated versions of SIAS and SPS that can be easily used and with minimal burden. A total of 1598 adults from the general Dutch population completed a survey asking information on social anxiety, mood and demographics. Exploratory and confirmatory factor analyses as well as reliability analysis with item-total statistics were performed. Confirmatory factor analysis revealed a 3-factor structure for social phobia, and a 2-factor structure for the SIAS, with the second factor containing both reversely scored items. The abbreviated versions of SPS (11 items) and SIAS (10 items) show excellent discriminant and construct validity (Cronbach's α=.90 and .92), while specificity analysis showed that gender, marital status and educational level (SIAS(10): pSIAS, reducing the questionnaire burden for participants in epidemiological and biobehavioral research. Copyright © 2011 Elsevier B.V. All rights reserved.

  15. Heavy Ion Physics at the CERN SPS: Roots 1974-1984 and Key Results

    CERN Multimedia

    CERN. Geneva

    2014-01-01

    Two communities, Nuclear and Particle Physics, had to come together to open up a new field at the CERN SPS in the early eighties, bringing CERN to the forefront worldwide until the start of RHIC in 2000. I will discuss the period before that, including the basic new ideas on parton deconfinement, key workshops, alternative accelerator options in the LBL-GSI-CERN triangle, and the final convergence of the three labs on the SPS, sacrificing any home future in this field for the first two. In 1984, 5 major experiments were approved for initially O16 and S32 beams at the SPS, with an unprecedented reuse of existing experimental equipment. Subsequent evolution followed thanks to intense learning processes, leading to a second generation of much improved or completely new experiments together with Pb beams starting in 1994. I will summarise the key results and their (then still cautious) interpretation as of 2000. They were used as an input to a Press Conference at CERN, announcing the detection of a 'n...

  16. Successful beam test of the SPS-to-LHC transfer line TI2

    CERN Multimedia

    2007-01-01

    Image of the first beam spot on the last BTV screen traversed by the beam during the TI 2 test.At 12:03:47 on 28 October a beam passed down the 2.7 km of the new SPS-to-LHC transfer line TI 2 at the first attempt, to within some 50 m of the LHC tunnel. After initial tuning, a range of measurements was carried out with a low intensity proton beam and preliminary analyses look good. After the test, no increase in radiation levels was found in either the LHC or ALICE, and the zones were rapidly opened again for access. As from next year TI 2 will regularly transport a beam from the SPS to the LHC injection point of Ring 1, near Point 2 (ALICE). The TI 8 transfer line, which will bring particles from the SPS to the injection point in Ring 2, near Point 8 (LHCb), was commissioned successfully with low intensity beam in 2004. The two LHC injection lines have a combined length of 5.6 km and comprise some seven hundred warm magnets. While a...

  17. 2002 Nonlinear Optics Measurements andModelling for the SPS at 26 GeV

    CERN Document Server

    Arduini, Gianluigi; Faus-Golfe, A; Iida, N; Tomás, R; CERN. Geneva. AB Department

    2003-01-01

    During SPS MDs in the summer of 2002, nonlinear chromaticity, coupling, amplitude-dependent detuning, resonance driving terms and phase advancesalong the ring were measured with a 72-bunch LHC batch at 26 GeV. Following the procedure developed in previous years, the SPS optics model has been updated, by adjusting the magnitude of sextupole and decapole components in the SPS dipole magnets and octupole components in the quadrupoles, respectively, to values which would be consistent with the measurements. We compare the field errors deduced in 2002, measuring over a larger momentum range, with those found in 2001 and 2000. We show that the resolution can be improved by averaging over the turn-by-turn beam position data from all BPMs, distributed around the ring, instead of using the single dedicated pick up of the tune meter. Computations by two different codes, MAD and SAD, indicate the sensitivity to matching algorithm and magnet representation. Finally, the tune shifts with transverse amplitude, the driving ...

  18. The 938 MHz resonant damping loops for the 200 MHz SPS travelling wave cavities

    CERN Document Server

    Caspers, F

    2012-01-01

    Measurements of the beam stability in the SPS in 1982 - 1983 have shown a transversal instability for high intensity beams [1]. The fact that this related technical note is published nearly 30 years later, is related to the revival of interest in the frame of SPS impedance evaluation for LS1. Until now there was just a barely known paper folder available which could be consulted on request. The instability mentioned above was identified from beam measurements as raised by a deflecting mode at approximately 940 MHz in the 200 MHz travelling wave cavities of the SPS. Estimates showed that an attenuation of this particular mode by 20 dB would be desirable. In order to achieve this attenuation some vacuum ports on top of the cavities were available. For the damping devices three requirements had to be met: - sufficient damping at about 940 MHz - no serious change of cavity input VSWR at 200 MHz - no water cooling requirement for this higher order mode coupler.

  19. Health system challenges to integration of mental health delivery in primary care in Kenya--perspectives of primary care health workers.

    Science.gov (United States)

    Jenkins, Rachel; Othieno, Caleb; Okeyo, Stephen; Aruwa, Julyan; Kingora, James; Jenkins, Ben

    2013-09-30

    Health system weaknesses in Africa are broadly well known, constraining progress on reducing the burden of both communicable and non-communicable disease (Afr Health Monitor, Special issue, 2011, 14-24), and the key challenges in leadership, governance, health workforce, medical products, vaccines and technologies, information, finance and service delivery have been well described (Int Arch Med, 2008, 1:27). This paper uses focus group methodology to explore health worker perspectives on the challenges posed to integration of mental health into primary care by generic health system weakness. Two ninety minute focus groups were conducted in Nyanza province, a poor agricultural region of Kenya, with 20 health workers drawn from a randomised controlled trial to evaluate the impact of a mental health training programme for primary care, 10 from the intervention group clinics where staff had received the training programme, and 10 health workers from the control group where staff had not received the training). These focus group discussions suggested that there are a number of generic health system weaknesses in Kenya which impact on the ability of health workers to care for clients with mental health problems and to implement new skills acquired during a mental health continuing professional development training programmes. These weaknesses include the medicine supply, health management information system, district level supervision to primary care clinics, the lack of attention to mental health in the national health sector targets, and especially its absence in district level targets, which results in the exclusion of mental health from such district level supervision as exists, and the lack of awareness in the district management team about mental health. The lack of mental health coverage included in HIV training courses experienced by the health workers was also striking, as was the intensive focus during district supervision on HIV to the detriment of other

  20. Evolution in controls methods for the SPS power converters

    CERN Document Server

    Dinius, A H; Brazier, J C L

    1995-01-01

    In common with much accelerator specific material, there is a constant need to improve both hardware and software for power converter control. Maintenance and performance improvements of older systems have become extremely tedious and in some areas impossible. By using modern real-time software and the latest high-performance processors, such problems should be substantially reduced. This paper describes the software concepts and the hardware chosen for the upgrade of the existing facilities. Using the UNIX compatible LynxOS real time kernel, running on a PowerPC 603 in a VME environment, this new approach provides excellent performance while retaining the desired flexibility for future enhancements. The 64 channel system is implemented as a set of cooperating processes, several of which are multi-threaded. Processes include analogue function generation, analogue measurement and digital I/O, all of which are accurately scheduled by the accelerator timing system. This generalised structure, which performs comp...

  1. Labor processes within a commodity system :a comparative study of workers in apple packing houses

    OpenAIRE

    Bello Barros, Rosario

    1993-01-01

    This study is a comparative analysis of how two forms of capitalist production intersect with gender to shape the labor process in apple packing houses of Virginia, United States and the VI Region, Chile. It illustrates how differences in growers' production systems, as well as traditional undervaluation of women's work, shape the organization of the apple-packing workplace. A theoretical framework based on the notion of labor processes was developed to study growers' farming systems and t...

  2. Recent results from CERN SPS experiments and the future heavy ...

    Indian Academy of Sciences (India)

    Abstract. We describe the important results from the recent experiments using lead beams at the .... Figure 2. (a) Pseudorapidity density ( С Ь), (b) width of the pseudorapidity distribu- ... of the collision, the system cools and expands leading to normal QCD vacuum in which the ..... SS is the support plate on which lead plates.

  3. Development of digital device based work verification system for cooperation between main control room operators and field workers in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Min, E-mail: jewellee@kaeri.re.kr [Korea Atomic Energy Research Institute, 305-353, 989-111 Daedeok-daero, Yuseong-gu, Daejeon (Korea, Republic of); Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1, Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Lee, Hyun Chul, E-mail: leehc@kaeri.re.kr [Korea Atomic Energy Research Institute, 305-353, 989-111 Daedeok-daero, Yuseong-gu, Daejeon (Korea, Republic of); Ha, Jun Su, E-mail: junsu.ha@kustar.ac.ae [Department of Nuclear Engineering, Khalifa University of Science Technology and Research, Abu Dhabi P.O. Box 127788 (United Arab Emirates); Seong, Poong Hyun, E-mail: phseong@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1, Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2016-10-15

    Highlights: • A digital device-based work verification and cooperation support system was developed. • Requirements were derived by interviewing field operators having experiences with mobile-based work support systems. • The usability of the proposed system was validated by conducting questionnaire surveys. • The proposed system will be useful if the manual or the set of guidelines is well constructed. - Abstract: Digital technologies have been applied in the nuclear field to check task results, monitor events and accidents, and transmit/receive data. The results of using digital devices have proven that these devices can provide high accuracy and convenience for workers, allowing them to obtain obvious positive effects by reducing their workloads. In this study, as one step forward, a digital device-based cooperation support system, the nuclear cooperation support and mobile documentation system (Nu-COSMOS), is proposed to support communication between main control room (MCR) operators and field workers by verifying field workers’ work results in nuclear power plants (NPPs). The proposed system consists of a mobile based information storage system to support field workers by providing various functions to make workers more trusted by MCR operators; also to improve the efficiency of meeting, and a large screen based information sharing system supports meetings by allowing both sides to share one medium. The usability of this system was estimated by interviewing field operators working in nuclear power plants and experts who have experience working as operators. A survey to estimate the usability of the suggested system and the suitability of the functions of the system for field working was conducted for 35 subjects who have experience in field works or with support system development-related research. The usability test was conducted using the system usability scale (SUS), which is widely used in industrial usability evaluation. Using questionnaires

  4. Development of digital device based work verification system for cooperation between main control room operators and field workers in nuclear power plants

    International Nuclear Information System (INIS)

    Lee, Seung Min; Lee, Hyun Chul; Ha, Jun Su; Seong, Poong Hyun

    2016-01-01

    Highlights: • A digital device-based work verification and cooperation support system was developed. • Requirements were derived by interviewing field operators having experiences with mobile-based work support systems. • The usability of the proposed system was validated by conducting questionnaire surveys. • The proposed system will be useful if the manual or the set of guidelines is well constructed. - Abstract: Digital technologies have been applied in the nuclear field to check task results, monitor events and accidents, and transmit/receive data. The results of using digital devices have proven that these devices can provide high accuracy and convenience for workers, allowing them to obtain obvious positive effects by reducing their workloads. In this study, as one step forward, a digital device-based cooperation support system, the nuclear cooperation support and mobile documentation system (Nu-COSMOS), is proposed to support communication between main control room (MCR) operators and field workers by verifying field workers’ work results in nuclear power plants (NPPs). The proposed system consists of a mobile based information storage system to support field workers by providing various functions to make workers more trusted by MCR operators; also to improve the efficiency of meeting, and a large screen based information sharing system supports meetings by allowing both sides to share one medium. The usability of this system was estimated by interviewing field operators working in nuclear power plants and experts who have experience working as operators. A survey to estimate the usability of the suggested system and the suitability of the functions of the system for field working was conducted for 35 subjects who have experience in field works or with support system development-related research. The usability test was conducted using the system usability scale (SUS), which is widely used in industrial usability evaluation. Using questionnaires

  5. SASD and the CERN/SPS run-time coordinator

    International Nuclear Information System (INIS)

    Morpurgo, G.

    1990-01-01

    Structured Analysis and Structured Design (SASD) provides us with a handy way of specifying the flow of data between the different modules (functional units) of a system. But the formalism loses its immediacy when the control flow has to be taken into account as well. Moreover, due to the lack of appropriate software infrastructure, very often the actual implementation of the system does not reflect the module decoupling and independence so much emphasized at the design stage. In this paper the run-time coordinator, a complete software infrastructure to support a real decoupling of the functional units, is described. Special attention is given to the complementarity of our approach and the SASD methodology. (orig.)

  6. Measurement of the transfer function of the main SPS Quadrupoles

    CERN Document Server

    Dinius, A; Semanaz, P; CERN. Geneva. SPS and LEP Division

    1998-01-01

    During two short MD's we have measured the transfer function (amplitude and phase) of the main quadrupole string QD. By the word string we mean the global effect of power supplies, magnets and the eddy current effects of the vacuum chamber. This paper presents the measurement procedure and the results, which are needed for the design of a real-time feedback system for the betatron tunes ( Qloop).

  7. Parton-hadron cascade approach at SPS and RHIC

    Energy Technology Data Exchange (ETDEWEB)

    Nara, Yasushi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-07-01

    A parton-hadron cascade model which is the extension of hadronic cascade model incorporating hard partonic scattering based on HIJING is presented to describe the space-time evolution of parton/hadron system produced by ultra-relativistic nuclear collisions. Hadron yield, baryon stopping and transverse momentum distribution are calculated and compared with HIJING and VNI. Baryon density, energy density and temperature for RHIC are calculated within this model. (author)

  8. Preliminary safety evaluation for the plutonium stabilization and packaging system

    International Nuclear Information System (INIS)

    Shapley, J.E.

    1997-01-01

    This Preliminary Safety Evaluation (PSE) describes and analyzes the installation and operation of the Plutonium Stabilization and Packaging System (SPS) at the Plutonium Finishing Plant (PFP). The SPS is a combination of components required to expedite the safe and timely storage of Plutonium (Pu) oxide. The SPS program will receive site Pu packages, process the Pu for storage, package the Pu into metallic containers, and safely store the containers in a specially modified storage vault. The location of the SPS will be in the 2736- ZB building and the storage vaults will be in the 2736-Z building of the PFP, as shown in Figure 1-1. The SPS will produce storage canisters that are larger than those currently used for Pu storage at the PFP. Therefore, the existing storage areas within the PFP secure vaults will require modification. Other modifications will be performed on the 2736-ZB building complex to facilitate the installation and operation of the SPS

  9. A strategic-interaction analysis of an urgent appeal system and its outcomes for garment workers

    NARCIS (Netherlands)

    den Hond, F; Stolwijk, S.; Merk, J.

    2014-01-01

    Within the global garment industry the term "urgent appeal" is used to describe a request for action to Western activist groups for support in a specific case of labor rights violations. The urgent appeal system has become an important strategy for the transnational antisweatshop movement. It is

  10. Older workers

    NARCIS (Netherlands)

    Ybema,J.F.; Giesen, F.

    2014-01-01

    Due to an ageing population and global economic competition, there is a societal need for people to extend their working lives while maintaining high work productivity. This article presents an overview of the labour participation, job performance, and job characteristics of older workers in the

  11. Migrating Worker

    DEFF Research Database (Denmark)

    Hansen, Hans

    This is the preliminary report on the results obtained in the Migrating Worker-project. This project was initiated by the Danish Ministry of Finance with the aim of illustrating the effects of the 1408/71 agreement and the bilateral double taxation agreements Denmark has with the countries included...

  12. Development of the Macro Command Editing Executive System for Factory Workers-Oriented Programless Visual Inspection System

    Science.gov (United States)

    Anezaki, Takashi; Wakitani, Kouichi; Nakamura, Masatoshi; Kubo, Hiroyasu

    Because visual inspection systems are difficult to tune, they create many problems for the kaizen process. This results in increased development costs and time to assure that the inspection systems function properly. In order to improve inspection system development, we designed an easy-tuning system called a “Program-less” visual inspection system. The ROI macro command which consisted of eight kinds of shape recognition macro commands and decision, operation, control commands was built. Furthermore, the macro command editing executive system was developed by the operation of only the GUI without editing source program. The validity of the ROI macro command was proved by the application of 488 places.

  13. Training system in radiation protection of workers of a radioactive facility

    International Nuclear Information System (INIS)

    Amador Balbona, Zayda; Perez Pijuan, Saul; Ayra Pardo, Fernando E.; Soria Guevara, Miguel A.

    2013-01-01

    The following topics are addressed: the state of the art of the studies on the biological effects of ionizing radiation, the new national regulations, operational experiences and in the transportation of radioactive materials and those obtained from the radiological events, radioactive waste management and the analysis of culture of safety in the installation. It evaluates the effectiveness of the training system through the analysis of the occurrence of radiological incidents and behavior of occupational exposure

  14. A Real-Time Location-Based Services System Using WiFi Fingerprinting Algorithm for Safety Risk Assessment of Workers in Tunnels

    Directory of Open Access Journals (Sweden)

    Peng Lin

    2014-01-01

    Full Text Available This paper investigates the feasibility of a real-time tunnel location-based services (LBS system to provide workers’ safety protection and various services in concrete dam site. In this study, received signal strength- (RSS- based location using fingerprinting algorithm and artificial neural network (ANN risk assessment is employed for position analysis. This tunnel LBS system achieves an online, real-time, intelligent tracking identification feature, and the on-site running system has many functions such as worker emergency call, track history, and location query. Based on ANN with a strong nonlinear mapping, and large-scale parallel processing capabilities, proposed LBS system is effective to evaluate the risk management on worker safety. The field implementation shows that the proposed location algorithm is reliable and accurate (3 to 5 meters enough for providing real-time positioning service. The proposed LBS system is demonstrated and firstly applied to the second largest hydropower project in the world, to track workers on tunnel site and assure their safety. The results show that the system is simple and easily deployed.

  15. Development and optimization of the LHC and the SPS beam diagnostics based on synchrotron radiation monitoring

    International Nuclear Information System (INIS)

    Trad, Georges

    2015-01-01

    Measuring the beam transverse emittance is fundamental in every accelerator, in particular for colliders, where its precise determination is essential to maximize the luminosity and thus the performance of the colliding beams. Synchrotron Radiation (SR) is a versatile tool for non-destructive beam diagnostics, since its characteristics are closely related to those of the source beam. At CERN, being the only available diagnostics at high beam intensity and energy, SR monitors are exploited as the proton beam size monitor of the two higher energy machines, the Super Proton Synchrotron (SPS) and the Large Hadron Collider (LHC). The thesis work documented in this report focused on the design, development, characterization and optimization of these beam size monitors. Such studies were based on a comprehensive set of theoretical calculations, numerical simulations and experiments. A powerful simulation tool has been developed combining conventional softwares for SR simulation and optics design, thus allowing the description of an SR monitor from its source up to the detector. The simulations were confirmed by direct observations, and a detailed performance studies of the operational SR imaging monitor in the LHC, where different techniques for experimentally validating the system were applied, such as cross-calibrations with the wire scanners at low intensity (that are considered as a reference) and direct comparison with beam sizes de-convoluted from the LHC luminosity measurements. In 2015, the beam sizes to be measured with the further increase of the LHC beam energy to 7 TeV will decrease down to ∼190 μm. In these conditions, the SR imaging technique was found at its limits of applicability since the error on the beam size determination is proportional to the ratio of the system resolution and the measured beam size. Therefore, various solutions were probed to improve the system's performance such as the choice of one light polarization, the reduction of

  16. Living through conflict and post-conflict: experiences of health workers in northern Uganda and lessons for people-centred health systems.

    Science.gov (United States)

    Namakula, Justine; Witter, Sophie

    2014-09-01

    Providing people-centred health systems--or any systems at all--requires specific measures to protect and retain healthcare workers during and after the conflict. This is particularly important when health staff are themselves the target of violence and abduction, as is often the case. This article presents the perspective of health workers who lived through conflict in four districts of northern Uganda--Pader, Gulu, Amuru, and Kitgum. These contained more than 90% of the people displaced by the decades of conflict, which ended in 2006. The article is based on 26 in-depth interviews, using a life history approach. This participatory tool encouraged participants to record key events and decisions in their lives, and to explore areas such as their decision to become a health worker, their employment history, and their experiences of conflict and coping strategies. These were analyzed thematically to develop an understanding of how to protect and retain staff in these challenging contexts. During the conflict, many health workers lost their lives or witnessed the death of their friends and colleagues. They also experienced abduction, ambush and injury. Other challenges included disconnection from social and professional support systems, displacement, limited supplies and equipment, increased workload and long working days and lack of pay. Health workers were not passive in the face of these challenges, however. They adopted a range of safety measures, such as mingling with community members, sleeping in the bush, and frequent change of sleeping place, in addition to psychological and practical coping strategies. Understanding their motivation and their views provides an important insight how to maintain staffing and so to continue to offer essential health care during difficult times and in marginalized areas. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2014; all rights reserved.

  17. Characteristics of construction firms at risk for future workers' compensation claims using administrative data systems, Washington State.

    Science.gov (United States)

    Marcum, Jennifer L; Foley, Michael; Adams, Darrin; Bonauto, Dave

    2018-06-01

    Construction is high-hazard industry, and continually ranks among those with the highest workers' compensation (WC) claim rates in Washington State (WA). However, not all construction firms are at equal risk. We tested the ability to identify those construction firms most at risk for future claims using only administrative WC and unemployment insurance data. We collected information on construction firms with 10-50 average full time equivalent (FTE) employees from the WA unemployment insurance and WC data systems (n=1228). Negative binomial regression was used to test the ability of firm characteristics measured during 2011-2013 to predict time-loss claim rates in the following year, 2014. Claim rates in 2014 varied by construction industry groups, ranging from 0.7 (Land Subdivision) to 4.6 (Foundation, Structure, and Building Construction) claims per 100 FTE. Construction firms with higher average WC premium rates, a history of WC claims, increasing number of quarterly FTE, and lower average wage rates during 2011-2013 were predicted to have higher WC claim rates in 2014. We demonstrate the ability to leverage administrative data to identify construction firms predicted to have future WC claims. This study should be repeated to determine if these results are applicable to other high-hazard industries. Practical Applications: This study identified characteristics that may be used to further refine targeted outreach and prevention to construction firms at risk. Published by Elsevier Ltd.

  18. Whole-system approaches to improving the health and wellbeing of healthcare workers: A systematic review.

    Directory of Open Access Journals (Sweden)

    Sarah L Brand

    Full Text Available Healthcare professionals throughout the developed world report higher levels of sickness absence, dissatisfaction, distress, and "burnout" at work than staff in other sectors. There is a growing call for the 'triple aim' of healthcare delivery (improving patient experience and outcomes and reducing costs; to include a fourth aim: improving healthcare staff experience of healthcare delivery. A systematic review commissioned by the United Kingdom's (UK Department of Health reviewed a large number of international healthy workplace interventions and recommended five whole-system changes to improve healthcare staff health and wellbeing: identification and response to local need, engagement of staff at all levels, and the involvement, visible leadership from, and up-skilling of, management and board-level staff.This systematic review aims to identify whole-system healthy workplace interventions in healthcare settings that incorporate (combinations of these recommendations and determine whether they improve staff health and wellbeing.A comprehensive and systematic search of medical, education, exercise science, and social science databases was undertaken. Studies were included if they reported the results of interventions that included all healthcare staff within a healthcare setting (e.g. whole hospital; whole unit, e.g. ward in collective activities to improve physical or mental health or promote healthy behaviours.Eleven studies were identified which incorporated at least one of the whole-system recommendations. Interventions that incorporated recommendations to address local need and engage the whole workforce fell in to four broad types: 1 pre-determined (one-size-fits-all and no choice of activities (two studies; or 2 pre-determined and some choice of activities (one study; 3 A wide choice of a range of activities and some adaptation to local needs (five studies; or, 3 a participatory approach to creating programmes responsive and adaptive to

  19. A primer for workers' compensation.

    Science.gov (United States)

    Bible, Jesse E; Spengler, Dan M; Mir, Hassan R

    2014-07-01

    A physician's role within a workers' compensation injury extends far beyond just evaluation and treatment with several socioeconomic and psychological factors at play compared with similar injuries occurring outside of the workplace. Although workers' compensation statutes vary among states, all have several basic features with the overall goal of returning the injured worker to maximal function in the shortest time period, with the least residual disability and shortest time away from work. To help physicians unfamiliar with the workers' compensation process accomplish these goals. Review. Educational review. The streamlined review addresses the topics of why is workers' compensation necessary; what does workers' compensation cover; progression after work injury; impairment and maximum medical improvement, including how to use the sixth edition of American Medical Association's (AMA) Guides to the evaluation of permanent impairment (Guides); completion of work injury claim after impairment rating; independent medical evaluation; and causation. In the "no-fault" workers' compensation system, physicians play a key role in progressing the claim along and, more importantly, getting the injured worker back to work as soon as safely possible. Physicians should remain familiar with the workers' compensation process, along with how to properly use the AMA Guides. Copyright © 2014 Elsevier Inc. All rights reserved.

  20. Development of the safety evaluation system in the respects of organizational factors and workers' consciousness. Pt. 5. Application of the system for industries except electric power industry

    International Nuclear Information System (INIS)

    Hasegawa, Naoko; Hirose, Ayako; Hayase, Kenichi; Sasou Kunihide; Takano, Kenichi

    2004-01-01

    The purpose of our study is to develop a safety evaluation system which clarifies the safety level of an organization. As a basic method of evaluation using a questionnaire had been established, now that the generalization is needed for the system. Hence, this paper is intended to verify the applicability of the system for eight manufacture industries. The investigation using a questionnaire was conducted for 125 factories' workers. The following results were obtained: 1) The Comprehensive Safety Index (CSI) taking into account individual and organizational factors was identified using the principal component analysis. 2) Although the criterion-related validity of CSI was confirmed for some industries, ti will be necessary for the advancement of the system's reliability to compile more data into the system. 3) According to the result of investigations on safety management in secure companies and the causes of current industrial accidents, it was clarified that the CSI had the content validity. 4) It seemed possible to evaluate the safety level using two different industries' data if there were similarities between the industries in the score of the CSI and the aspects to which were attached importance for the improvement of the safety. (author)

  1. Internal dose assessment data management system for a large population of Pu workers

    International Nuclear Information System (INIS)

    Bertelli, L.; Miller, G.; Little, T.; Guilmette, R.A.; Glasser, S.M.

    2007-01-01

    This paper describes the design and implementation of the Los Alamos National Laboratory (LANL) dose assessment (DA) data system. Dose calculations for the most important radionuclides at LANL, namely plutonium, americium, uranium and tritium, are performed through the Microsoft Access DA database. DA includes specially developed forms and macros that perform a variety of tasks, such as retrieving bioassay data, launching the FORTRAN internal dosimetry applications and displaying dose results in the form of text summaries and plots. The DA software involves the following major processes: (1) downloading of bioassay data from a remote data source, (2) editing local and remote databases, (3) setting up and carrying out internal dose calculations using the UF code or the ID code, (3) importing results of the dose calculations into local results databases, (4) producing a secondary database of 'official results' and (5) automatically creating and e-mailing reports. The software also provides summary status and reports of the pending DAs, which are useful for managing the cases in process. (authors)

  2. Steel dust in the New York City subway system as a source of manganese, chromium, and iron exposures for transit workers.

    Science.gov (United States)

    Chillrud, Steven N; Grass, David; Ross, James M; Coulibaly, Drissa; Slavkovich, Vesna; Epstein, David; Sax, Sonja N; Pederson, Dee; Johnson, David; Spengler, John D; Kinney, Patrick L; Simpson, H James; Brandt-Rauf, Paul

    2005-03-01

    The United States Clean Air Act Amendments of 1990 reflected increasing concern about potential effects of low-level airborne metal exposure on a wide array of illnesses. Here we summarize results demonstrating that the New York City (NYC) subway system provides an important microenvironment for metal exposures for NYC commuters and subway workers and also describe an ongoing pilot study of NYC transit workers' exposure to steel dust. Results from the TEACH (Toxic Exposure Assessment, a Columbia and Harvard) study in 1999 of 41 high-school students strongly suggest that elevated levels of iron, manganese, and chromium in personal air samples were due to exposure to steel dust in the NYC subway. Airborne concentrations of these three metals associated with fine particulate matter were observed to be more than 100 times greater in the subway environment than in home indoor or outdoor settings in NYC. While there are currently no known health effects at the airborne levels observed in the subway system, the primary aim of the ongoing pilot study is to ascertain whether the levels of these metals in the subway air affect concentrations of these metals or related metabolites in the blood or urine of exposed transit workers, who due to their job activities could plausibly have appreciably higher exposures than typical commuters. The study design involves recruitment of 40 transit workers representing a large range in expected exposures to steel dust, the collection of personal air samples of fine particulate matter, and the collection of blood and urine samples from each monitored transit worker.

  3. Environmental contamination, product contamination and workers exposure using a robotic system for antineoplastic drug preparation.

    Science.gov (United States)

    Sessink, Paul J M; Leclercq, Gisèle M; Wouters, Dominique-Marie; Halbardier, Loïc; Hammad, Chaïma; Kassoul, Nassima

    2015-04-01

    Environmental contamination, product contamination and technicians exposure were measured following preparation of iv bags with cyclophosphamide using the robotic system CytoCare. Wipe samples were taken inside CytoCare, in the clean room environment, from vials, and prepared iv bags including ports and analysed for contamination with cyclophosphamide. Contamination with cyclophosphamide was also measured in environmental air and on the technicians hands and gloves used for handling the drugs. Exposure of the technicians to cyclophosphamide was measured by analysis of cyclophosphamide in urine. Contamination with cyclophosphamide was mainly observed inside CytoCare, before preparation, after preparation and after daily routine cleaning. Contamination outside CytoCare was incidentally found. All vials with reconstituted cyclophosphamide entering CytoCare were contaminated on the outside but vials with powdered cyclophosphamide were not contaminated on the outside. Contaminated bags entering CytoCare were also contaminated after preparation but non-contaminated bags were not contaminated after preparation. Cyclophosphamide was detected on the ports of all prepared bags. Almost all outer pairs of gloves used for preparation and daily routine cleaning were contaminated with cyclophosphamide. Cyclophosphamide was not found on the inner pairs of gloves and on the hands of the technicians. Cyclophosphamide was not detected in the stationary and personal air samples and in the urine samples of the technicians. CytoCare enables the preparation of cyclophosphamide with low levels of environmental contamination and product contamination and no measurable exposure of the technicians. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  4. The GCKIII Kinase Sps1 and the 14-3-3 Isoforms, Bmh1 and Bmh2, Cooperate to Ensure Proper Sporulation in Saccharomyces cerevisiae

    Science.gov (United States)

    Slubowski, Christian J.; Paulissen, Scott M.; Huang, Linda S.

    2014-01-01

    Sporulation in the budding yeast Saccharomyces cerevisiae is a developmental program initiated in response to nutritional deprivation. Sps1, a serine/threonine kinase, is required for sporulation, but relatively little is known about the molecular mechanisms through which it regulates this process. Here we show that SPS1 encodes a bona-fide member of the GCKIII subfamily of STE20 kinases, both through phylogenetic analysis of the kinase domain and examination of its C-terminal regulatory domain. Within the regulatory domain, we find Sps1 contains an invariant ExxxPG region conserved from plant to human GCKIIIs that we call the EPG motif; we show this EPG motif is important for SPS1 function. We also find that Sps1 is phosphorylated near its N-terminus on Threonine 12, and that this phosphorylation is required for the efficient production of spores. In Sps1, Threonine 12 lies within a 14-3-3 consensus binding sequence, and we show that the S. cerevisiae 14-3-3 proteins Bmh1 and Bmh2 bind Sps1 in a Threonine 12-dependent fashion. This interaction is significant, as BMH1 and BMH2 are required during sporulation and genetically interact with SPS1 in sporulating cells. Finally, we observe that Sps1, Bmh1 and Bmh2 are present in both the nucleus and cytoplasm during sporulation. We identify a nuclear localization sequence in Sps1 at amino acids 411–415, and show that this sequence is necessary and sufficient for nuclear localization. Taken together, these data identify regions within Sps1 critical for its function and indicate that SPS1 and 14-3-3s act together to promote proper sporulation in S. cerevisiae. PMID:25409301

  5. Pb-ions in harmonic number 4653 at SPS flat bottom

    CERN Document Server

    Bartosik, H; Huschauer, A

    2017-01-01

    Pb-ion beams suer from strong beam degradation suchas transverse emittance growth and losses on the long flatbottom of the SPS cycles used for LHC filling. A possiblecontribution to the losses could come from RF noise, espe-cially due to the frequency and amplitude modulation duringeach revolution period of the fixed frequency accelerationmode required for the acceleration of these beams. A ma-chine development session in 2016 was devoted to a directcomparison of a cycle with fixed harmonic number at flatbottom and a cycle with the usually used fixed frequencymode. The main results are reported here.

  6. New ISR and SPS collider multiplicity data and the Golokhvastov generalization of the KNO scaling

    International Nuclear Information System (INIS)

    Szwed, R.; Wrochna, G.

    1985-01-01

    The generalization of KNO scaling proposed by Golokhvastov (KNO-G scaling) is tested using pp multiplicity data, in particular results of the new high precision ISR measurements. Since the data obey KNO-G scaling over the full energy range √s=2.51-62.2 GeV with the scaling function psi(z), having only one free parameter, the superiority of the KNO-G over the standard approach is clearly demonstrated. The extrapolation within KNO-G scaling to the SPS Collider energy range and a comparison with the recent UA5 multiplicity results is presented. (orig.)

  7. Measurement of Nuclear Interaction Rates in Crystal Using the CERN-SPS North Area Test Beams

    CERN Document Server

    Losito, R; Taratin, A

    2010-01-01

    A number of tests were performed in the North area of the SPS in view of investigating crystal-particles interactions for future application in hadron colliders. The rate of nuclear interactions was measured with 400 GeV proton beams directed into a silicon bent crystal. In this way the background induced by the crystal either in amorphous or in channeling orientation was revealed. The results provide fundamental information to put in perspective the use of silicon crystals to assist halo collimation in hadron colliders, whilst minimizing the induced loss.

  8. Gluon saturation and baryon stopping in the SPS, RHIC, and LHC energy regions

    International Nuclear Information System (INIS)

    Li Shuang; Feng Shengqin

    2012-01-01

    A new geometrical scaling method with a gluon saturation rapidity limit is proposed to study the gluon saturation feature of the central rapidity region of relativistic nuclear collisions. The net-baryon number is essentially transported by valence quarks that probe the saturation regime in the target by multiple scattering. We take advantage of the gluon saturation model with geometric scaling of the rapidity limit to investigate net baryon distributions, nuclear stopping power and gluon saturation features in the SPS and RHIC energy regions. Predictions for net baryon rapidity distributions, mean rapidity loss and gluon saturation feature in central Pb + Pb collisions at the LHC are made in this paper. (authors)

  9. Photon production in relativistic nuclear collisions at SPS and RHIC energies

    CERN Document Server

    Turbide, S; Rapp, R; 10.1142/S0217751X0402258X

    2004-01-01

    Chiral Lagrangians are used to compute the production rate of photons from the hadronic phase of relativistic nuclear collisions. Special attention is paid to the role of the a/sub 1/ pseudovector. Calculations that include strange meson reactions, form factors, the use of consistent vector spectral densities, the emission from a quark-gluon plasma, and primordial nucleon-nucleon collisions reproduce the photon spectra measured at the Super Proton Synchrotron (SPS). Some predictions for the Relativistic Heavy Ion Collider (RHIC) are made.

  10. Differences in high $p_{t}$ meson production between CERN SPS and RHIC heavy ion collisions

    CERN Document Server

    Papp, G; Barnafoldi, G G; Yi Zhang; Fái, G; Papp, Gabor; Levai, Peter; Barnafoldi, Gergely G.; Zhang, Yi; Fai, George

    2001-01-01

    In this talk we present a perturbative QCD improved parton model calculation for light meson production in high energy heavy ion collisions. In order to describe the experimental data properly, one needs to augment the standard pQCD model by the transverse momentum distribution of partons ("intrinsic k/sub T/"). Proton-nucleus data indicate the presence of nuclear shadowing and multi-scattering effects. Further corrections are needed in nucleus-nucleus collisions to explain the observed reduction of the cross section. We introduce the idea of proton dissociation and compare our calculations with the SPS and RHIC experimental data. (18 refs).

  11. Proposal for SPS beam time for the baby MIND and TASD neutrino detector prototypes

    CERN Document Server

    Asfandiyarov, R.; Blondel, A.; Bogomilov, M.; Bross, A.; Cadoux, F.; Cervera, A.; Izmaylov, A.; Karadzhov, Y.; Karpikov, I.; Khabibulin, M.; Khotyantsev, A.; Kopylov, A.; Kudenko, Y.; Matev, R.; Mineev, O.; Musienko, Y.; Nessi, M.; Noah, E.; Rubbia, A.; Shaykiev, A.; Soler, P.; Tsenov, R.; Vankova-Kirilova, G.; Yershov, N.

    2015-01-01

    The design, construction and testing of neutrino detector prototypes at CERN are ongoing activities. This document reports on the design of solid state baby MIND and TASD detector prototypes and outlines requirements for a test beam at CERN to test these, tentatively planned on the H8 beamline in the North Area, which is equipped with a large aperture magnet. It is hoped that this will allow for the current proposal to be considered in light of the recently approved projects related to neutrino activities with the SPS in the North Area in the medium term 2015-2020.

  12. Design of a high-precision fast wire scanner for the SPS at CERN

    CERN Document Server

    Veness, R; Dehning, B; Emery, J; Herranz Alvarez, J; Koujili, M; Samuelsson, S; Sirvent, J-L

    2012-01-01

    Studies are going on of a new wire scanner concept. All moving parts are inside the beam vacuum and it is specified for use in all the machines across the CERN accelerator complex. Key components have been developed and tested. Work is now focussing on the installation of a prototype for test in the Super Proton Synchrotron (SPS) accelerator. This article presents the specification of the device and constraints on the design for integration in the different accelerators at CERN. The design issues of the mechanical components are discussed and optimisation work shown. Finally, the prototype design, integrating the several components into the vacuum tank is presented.

  13. Routine health information system utilization and factors associated thereof among health workers at government health institutions in East Gojjam Zone, Northwest Ethiopia.

    Science.gov (United States)

    Shiferaw, Atsede Mazengia; Zegeye, Dessalegn Tegabu; Assefa, Solomon; Yenit, Melaku Kindie

    2017-08-07

    Using reliable information from routine health information systems over time is an important aid to improving health outcomes, tackling disparities, enhancing efficiency, and encouraging innovation. In Ethiopia, routine health information utilization for enhancing performance is poor among health workers, especially at the peripheral levels of health facilities. Therefore, this study aimed to assess routine health information system utilization and associated factors among health workers at government health institutions in East Gojjam Zone, Northwest Ethiopia. An institution based cross-sectional study was conducted at government health institutions of East Gojjam Zone, Northwest Ethiopia from April to May, 2013. A total of 668 health workers were selected from government health institutions, using the cluster sampling technique. Data collected using a standard structured and self-administered questionnaire and an observational checklist were cleaned, coded, and entered into Epi-info version 3.5.3, and transferred into SPSS version 20 for further statistical analysis. Variables with a p-value of less than 0.05 at multiple logistic regression analysis were considered statistically significant factors for the utilization of routine health information systems. The study revealed that 45.8% of the health workers had a good level of routine health information utilization. HMIS training [AOR = 2.72, 95% CI: 1.60, 4.62], good data analysis skills [AOR = 6.40, 95%CI: 3.93, 10.37], supervision [AOR = 2.60, 95% CI: 1.42, 4.75], regular feedback [AOR = 2.20, 95% CI: 1.38, 3.51], and favorable attitude towards health information utilization [AOR = 2.85, 95% CI: 1.78, 4.54] were found significantly associated with a good level of routine health information utilization. More than half of the health workers working at government health institutions of East Gojjam were poor health information users compared with the findings of others studies. HMIS training, data

  14. Study on workloads of human care worker with the introduction of IT system - the characteristics of work loads by observational research and the suggestions for KAIZEN.

    Science.gov (United States)

    Mizuno, Yuki; Yoshikawa, Toru; Matsuda, Fumiko; Takeuchi, Yuriko; Motegi, Nobuyuki; Ikegami, Thor; Sakai, Kazuhiro

    2012-01-01

    The purpose of this study was to clarify the characteristic of workloads on human care worker with the introduction of IT system, and suggested the support measures for KAIZEN in Japan. The investigation method is workflow line and hearing with a focus on work observation. The objects were 8 human care workers of the acute hospital that introduced an electronic system. By the introduction of the electronic chart, the nurse station sojourn time decreased, sickroom sojourn time increased, and time about direct nursing care to a patient increased. In addition, access to patient information became easy, and the offer of the health care service based on correct information came to be possible in real time. By The point of workflow line, it was effect that moving lengths decreased in order to install the electronic chart in patients' rooms. Though, it was a problem that it hasn't formed where to place the instruments such as sphygmomanometer, clinical thermometer and others.

  15. Effects of noise pollution over the blood serum immunoglobulins and auditory system on the VFM airport workers, Van, Turkey.

    Science.gov (United States)

    Akan, Zafer; Körpinar, Mehmet Ali; Tulgar, Metin

    2011-06-01

    Noise pollution is a common health problem for developing countries. Especially highways and airports lead to noise pollution in different levels and in many frequencies. In this study, we focused on the effect of noise pollution in airports. This work aimed measurements of noise pollution levels in Van Ferit Melen (VFM) airport and effect of noise pollution over the immunoglobulin A, G, and M changes among VFM airport workers in Turkey. It was seen that apron and terminal workers were exposed to high noise (>80 dB(A)) without any protective precautions. Noise-induced temporary threshold shifts and noise-induced permanent threshold shifts were detected between the apron workers (p  0.05). These findings suggested that the noise pollution in the VFM airport could lead to hearing loss and changes in blood serum immunoglobulin levels of airport workers. Blood serum immunoglobulin changes might be due to vibrational effects of noise pollution. Airport workers should apply protective precautions against effect of noise pollution in the VFM airport.

  16. How do health workers experience and cope with shocks? Learning from four fragile and conflict-affected health systems in Uganda, Sierra Leone, Zimbabwe and Cambodia

    OpenAIRE

    Witter, Sophie; Wurie, Haja; Chandiwana, Pamela; Namakula, Justine; So, Sovannarith; Alonso-Garbayo, Alvaro; Ssengooba, Freddie; Raven, Joanna

    2017-01-01

    This article is grounded in a research programme which set out to understand how to rebuild health systems post-conflict. Four countries were studied – Uganda, Sierra Leone, Zimbabwe, and Cambodia – which were at different distances from conflict and crisis, as well as each having a unique conflict story. During the research process, the Ebola epidemic broke out in West Africa. Zimbabwe has continued to face a profound economic crisis. Within our research on health worker incentives, we captu...

  17. Mechanical characterization of cemented carbide WC-6Co (%wt) manufactured by SPS (Spark Plasma Sintering; Caracterizacao mecanica de metal duro WC-6Co (%massa) sinterizado via SPS (Spark Plasma Sintering)

    Energy Technology Data Exchange (ETDEWEB)

    Boidi, G.; Tertuliano, A.J.; Machado, I.F., E-mail: guido.boidi@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Departamento de Engenharia Mecatronica e Sistemas Mecanicos; Rodrigues, D. [BRATS- Filtros Sinterizados e Pos Metalicos, Cajamar, SP (Brazil)

    2016-07-01

    This work aimed to manufacture cemented carbide (WC-6%wtCo) obtained by SPS (Spark Plasma Sintering) process and to carry out the mechanical characterization by hardness and fracture toughness. The material was consolidated at 1100 deg C for different holding times (1 min, 5 min, 10 min), in order to evaluate the densification. A reference sample was also used to be compared to SPS. Optical and scanning electron microscopy were carried out to characterize the microstructural features of the samples and mechanical properties were obtained by hardness measurements (micro and macro) and instrumented indentation. The fracture toughness was calculated with the method of Palmqvist. Best results were found in the material sintered by SPS for 10 minutes of holding time, in which 97% of relative density and about 1600 HV{sub 10} was reached. (author)

  18. Emission of single photons, hadrons, and dileptons in $Pb+Pb$ collisions at CERN SPS and quark hadron phase transition

    CERN Document Server

    Srivastava, D K; Kvasnikova, I; Gale, C; Srivastava, Dinesh Kumar; Sinha, Bikash; Kvasnikova, Ioulia; Gale, Charles

    2002-01-01

    The production of single photons in $Pb+Pb$ collisions at the CERN SPS as measured by the WA98 experiment is analysed. A very good description of the data is obtained if a quark gluon plasma is assumed to be formed initially, which expands, cools, hadronizes, and undergoes freeze-out. A rich hadronic equation of state is used and the transverse expansion of the interacting system is taken into account. The recent estimates of photon production in quark-matter (at two loop level) along with the dominant reactions in the hadronic matter leading to photons are used. Most of the radiation of the photons is seen to arise from the quark-matter, which contributes dominantly through the mechanism of annihilation of quarks with scattering, and which in turn is possible only in a hot and dense plasma of quarks and gluons. The same treatment provides a very good description to hadronic spectra measured by several groups and the intermediate mass dileptons measured by the NA50 experiment, lending a strong support to the ...

  19. Identification and analysis of charged hadrons in p+p interactions from NA61/SHINE experiment at CERN SPS energies

    CERN Document Server

    Pulawski, Szymon

    The phase-transition of strongly interacting matter is a very interesting phenom- ena, which still is not fully understood. Signi cant contribution to improving knowledge about properties of the onset of decon nement of strongly interact- ing matter might come from the NA61/SHINE experiment at CERN. The main goal of this xed-target experiment is to discover the critical point and study the properties of the onset of decon nement. This goal has been reached by the pre- cise measurement of the hadron production in proton-proton, proton-nucleus and nucleus-nucleus interactions in a wide range of system sizes and collision energies. The main goal of this thesis was to obtained two-dimensional spectra of positively and negatively charged pions, kaons and protons produced in p + p interactions at SPS energy range (20 ; 30 : 9 ; 40 ; 80 ; 158 GeV=c ). This studies are necessary for understanding of the onset of decon nement. For this purpose, identi cation and correction techniques dedicated...

  20. Development of Fragmented Low-Z Ion Beams for the NA61 Experiment at the CERN SPS

    CERN Document Server

    Efthymiopoulos, I; Bohl, T; Breuker, H; Calviani, M; Manglunki, D; Mataguez, S; Maury, S; Valderanis, C; Cornelis, K; Spanggaard, J; Cettour-Cave, S; Gazdzicki, M; Seyboth, P; Guber, F; Ivashkin, A

    2011-01-01

    The NA61 experiment, aims to study the properties of the onset of deconfinement at low SPS energies and to find signatures of the critical point of strongly interacting matter. A broad range in T-μB phase diagram will be covered by performing an energy (13A-158AGeV/c) and system size (p+p, Be+Be, Ar+Ca, Xe+La) scan. In a first phase, fragmented ion beams of 7Be or 11C produced as secondaries with the same momentum per nucleon when the incident primary Pb-ion beam hits a thin Be target will be used. The H2 beam line that transports the beam to the experiment acts as a double spectrometer which combined with a new thin target (degrader) where fragments loose energy proportional to the square of their charge allows the separation of the wanted A/Z fragments. Thin scintillators and TOF measurement for the low energy points are used as particle identification devices. In this paper results from the first test of the fragmented ion beam done in 2010 will be presented showing that a pure Be beam can be obtained sa...

  1. [The role of information and training for workers on the correct use of earplugs in assessing real noise attenuation with E-A-RfitTM system].

    Science.gov (United States)

    Cassano, Filippo; Aloise, Ingrid; Labianca, Graziano; Gaccione, Vincenzo; Mazzotta, Cosimo; Cardascia, Francesco; Garavaglia, Michela; Germano, Candida; Dentamaro, Antonella; Di Lorenzo, Luigi

    2015-07-08

    Laboratory levels of perceived noise attenuation as heard using earplugs are always higher than the real levels that can be achieved at the workplace. The employer is bound by law to supply individual hearing protection devices (HPDs), to assess their efficiency and efficacy, and also to inform and train workers on the correct use of HPDs. This study assessed the real "personal attenuation rating" (PAR) of HPDs  used by workers at the workplace, before (PAR A) and after (PAR B) specific and individual training. These values were also compared with the theoretical  "single number rating" (SNR) provided by the manufacturer. The study covered all the 65 male employees of an awnings factory, using the E-A-RfitTM computerized method, which can measure PARs, based on the difference between sound pressures recorded by an "outside" microphone and an "inside" microphone placed in the auditory canal, with earplugs inserted, before (PAR A) and after (PAR B), i.e., the specific and individual training described above. PARs B were always definitely higher than PARs A, both for all tested frequencies and the corresponding average values, which were automatically detected by E-A-RfitTM. Furthermore the same PARs B were  decidedly lower than the respective SNRs supplied by the manufacturer on the basis of laboratory assessments. These data prove that specific and individual training for workers improves the performance of earplugs, contributing to a more appropriate secondary prevention of the effects of noise on hearing; they also prove that the real attenuation recorded in workers are always lower than those supplied by the manufacturer of the devices. It is recommended that the E-A-RfitTM system, which allowed these results to be achieved objectively, should be normally used to assess exposure to noise in workers, when HPDs are worn.

  2. Development of the safety evaluation system in the respects of organizational factors and workers' consciousness. Pt. 4. Application of the system for contract companies

    International Nuclear Information System (INIS)

    Hasegawa, Naoko; Hirose, Ayako; Hayase, Kenichi; Tsuge, Tadafumi; Sasou, Kunihide; Takano, Kenichi

    2003-01-01

    The purpose of our study is to develop a safety evaluation system which clarifies the safety level of an organization. As a basic method of evaluation using a questionnaire had been established, now that the generalization is needed for the system. Hence, this paper is intended to consider the applicability of the system for contract companies. Subjects were workers who belonged to contract companies engaging in the maintenance of power plants in regular inspections. The following results were obtained: 1) The Comprehensive Safety Index (CSI) taking into account individual and organizational factors was identified using the principal component analysis. 2) The validity of CSI was confirmed with significant correlations between the CSI score and the rate of accidents. 3) Careful consideration should be provided for individual factors especially when evaluating the safety level of subcontract companies. 4) It seemed necessary to take into account the influence of parent companies and occupational hazards level. 5) The comparison among different industries should be avoided because of the difference in organizational structures and subjects of attention for keeping safety. (author)

  3. Workplace interpersonal conflicts among the healthcare workers: Retrospective exploration from the institutional incident reporting system of a university-affiliated medical center.

    Directory of Open Access Journals (Sweden)

    Jih-Shuin Jerng

    Full Text Available There have been concerns about the workplace interpersonal conflict (WIC among healthcare workers. As healthcare organizations have applied the incident reporting system (IRS widely for safety-related incidents, we proposed that this system might provide a channel to explore the WICs.We retrospectively reviewed the reports to the IRS from July 2010 to June 2013 in a medical center. We identified the WICs and typed these conflicts according to the two foci (task content/process and interpersonal relationship and the three properties (disagreement, interference, and negative emotion, and analyzed relevant data.Of the 147 incidents with WIC, the most common related processes were patient transfer (20%, laboratory tests (17%, surgery (16% and medical imaging (16%. All of the 147 incidents with WIC focused on task content or task process, but 41 (27.9% also focused on the interpersonal relationship. We found disagreement, interference, and negative emotion in 91.2%, 88.4%, and 55.8% of the cases, respectively. Nurses (57% were most often the reporting workers, while the most common encounter was the nurse-doctor interaction (33%, and the majority (67% of the conflicts were experienced concurrently with the incidents. There was a significant difference in the distribution of worker job types between cases focused on the interpersonal relationship and those without (p = 0.0064. The doctors were more frequently as the reporter when the conflicts focused on the interpersonal relationship (34.1% than not on it (17.0%. The distributions of worker job types were similar between those with and without negative emotion (p = 0.125.The institutional IRS is a useful place to report the workplace interpersonal conflicts actively. The healthcare systems need to improve the channels to communicate, manage and resolve these conflicts.

  4. Workplace interpersonal conflicts among the healthcare workers: Retrospective exploration from the institutional incident reporting system of a university-affiliated medical center.

    Science.gov (United States)

    Jerng, Jih-Shuin; Huang, Szu-Fen; Liang, Huey-Wen; Chen, Li-Chin; Lin, Chia-Kuei; Huang, Hsiao-Fang; Hsieh, Ming-Yuan; Sun, Jui-Sheng

    2017-01-01

    There have been concerns about the workplace interpersonal conflict (WIC) among healthcare workers. As healthcare organizations have applied the incident reporting system (IRS) widely for safety-related incidents, we proposed that this system might provide a channel to explore the WICs. We retrospectively reviewed the reports to the IRS from July 2010 to June 2013 in a medical center. We identified the WICs and typed these conflicts according to the two foci (task content/process and interpersonal relationship) and the three properties (disagreement, interference, and negative emotion), and analyzed relevant data. Of the 147 incidents with WIC, the most common related processes were patient transfer (20%), laboratory tests (17%), surgery (16%) and medical imaging (16%). All of the 147 incidents with WIC focused on task content or task process, but 41 (27.9%) also focused on the interpersonal relationship. We found disagreement, interference, and negative emotion in 91.2%, 88.4%, and 55.8% of the cases, respectively. Nurses (57%) were most often the reporting workers, while the most common encounter was the nurse-doctor interaction (33%), and the majority (67%) of the conflicts were experienced concurrently with the incidents. There was a significant difference in the distribution of worker job types between cases focused on the interpersonal relationship and those without (p = 0.0064). The doctors were more frequently as the reporter when the conflicts focused on the interpersonal relationship (34.1%) than not on it (17.0%). The distributions of worker job types were similar between those with and without negative emotion (p = 0.125). The institutional IRS is a useful place to report the workplace interpersonal conflicts actively. The healthcare systems need to improve the channels to communicate, manage and resolve these conflicts.

  5. Satellite power systems (SPS) concept definition study. Volume 2, part 1: System engineering

    Science.gov (United States)

    Hanley, G. M.

    1980-01-01

    Top level trade studies are presented, including comparison of solid state and klystron concepts, higher concentration on the solar cells, composite and aluminum structure, and several variations to the reference concept. Detailed trade studies are presented in each of the subsystem areas (solar array, power distribution, structures, thermal control, attitude control and stationkeeping, microwave transmission, and ground receiving station). A description of the selected point design is also presented.

  6. Optics Measurements and Matching of TT2-TT10 Line for Injection of the LHC Beam in the SPS

    CERN Document Server

    Benedetto, E

    2008-01-01

    A well matched injection in the SPS is very important for preserving the emittance of the LHC beam. The paper presents the algorithms used for the analysis and the results of the 2007 optics measurements campaign done in the transfer line TT2-TT10 and in the SPS. The dispersion is computed by varying the beam momentum and recording the offsets at the BPMs, while the Twiss parameters and emittance measurements in TT2-TT10 are performed with beam profile monitors equipped with OTR screens. Finally, on the basis of such measurements, a betatron and dispersion matching of TT2-TT10 for injection in the SPS has been performed and successfully put in operation since October 2007.

  7. Transverse Phenomena in Pion Production in Hadronic Collisions at SPS energy

    CERN Document Server

    Chvála, Ondrej

    A comparative study of pion production in hadronic collisio ns at SPS energies focusing on transverse phenomena is presented. Charged pion densities in p+p, p+C, p+Pb and Pb+Pb interactions, obtained at the CERN SPS with the NA49 detecto r setup, are discussed in the forward hemisphere covering ranges in Feynman x F between 0 and 0.4 and in transverse momentum from 0 to 2.1 GeV/c. A detailed description of the da ta analysis, the corrections and centrality determination is given for p+Pb interaction s using a sample of 2 M events. These data are compared to p+p collisions in order to extract those physics quantities which indicate deviations from the elementary reaction specific t o the presence of the nucleus. The evolution of these quantities as a function of centrality is discussed. Their comparison to p+C and Pb+Pb collisions reveals a smooth dependence on the n umber of collisions per participant. In particular, the enhancement of pion yields at high transverse momentum is studied. It is shown to be gove...

  8. Scaling of charged particle multiplicity in Pb-Pb collisions at SPS energies

    CERN Document Server

    Abreu, M C; Alexa, C; Arnaldi, R; Ataian, M R; Baglin, C; Baldit, A; Bedjidian, Marc; Beolè, S; Boldea, V; Bordalo, P; Borges, G; Bussière, A; Capelli, L; Castanier, C; Castor, J I; Chaurand, B; Chevrot, I; Cheynis, B; Chiavassa, E; Cicalò, C; Claudino, T; Comets, M P; Constans, N; Constantinescu, S; Cortese, P; De Falco, A; De Marco, N; Dellacasa, G; Devaux, A; Dita, S; Drapier, O; Ducroux, L; Espagnon, B; Fargeix, J; Force, P; Gallio, M; Gavrilov, Yu K; Gerschel, C; Giubellino, P; Golubeva, M B; Gonin, M; Grigorian, A A; Grigorian, S; Grossiord, J Y; Guber, F F; Guichard, A; Gulkanian, H R; Hakobyan, R S; Haroutunian, R; Idzik, M; Jouan, D; Karavitcheva, T L; Kluberg, L; Kurepin, A B; Le Bornec, Y; Lourenço, C; Macciotta, P; MacCormick, M; Marzari-Chiesa, A; Masera, M; Masoni, A; Monteno, M; Musso, A; Petiau, P; Piccotti, A; Pizzi, J R; Prado da Silva, W L; Prino, F; Puddu, G; Quintans, C; Ramello, L; Ramos, S; Rato-Mendes, P; Riccati, L; Romana, A; Santos, H; Saturnini, P; Scalas, E; Scomparin, E; Serci, S; Shahoyan, R; Sigaudo, F; Silva, S; Sitta, M; Sonderegger, P; Tarrago, X; Topilskaya, N S; Usai, G L; Vercellin, Ermanno; Villatte, L; Willis, N

    2002-01-01

    The charged particle multiplicity distribution $dN_{ch}/d\\eta$ has been measured by the NA50 experiment in Pb--Pb collisions at the CERN SPS. Measurements were done at incident energies of 40 and 158 GeV per nucleon over a broad impact parameter range. The multiplicity distributions are studied as a function of centrality using the number of participating nucleons ($N_{part}$), or the number of binary nucleon--nucleon collisions ($N_{coll}$). Their values at midrapidity exhibit a power law scaling behaviour given by $N_{part}^{1.00}$ and $N_{coll}^{0.75}$ at 158 GeV. Compatible results are found for the scaling behaviour at 40 GeV. The width of the $dN_{ch}/d\\eta$ distributions is larger at 158 than at 40 GeV/nucleon and decreases slightly with centrality at both energies. Our results are compared to similar studies performed by other experiments both at the CERN SPS and at RHIC.}

  9. A Facility to Search for Hidden Particles (SHiP) at the CERN SPS

    CERN Document Server

    Anelli, M.; Arduini, G.; Back, J.J.; Bagulya, A.; Baldini, W.; Baranov, A.; Barker, G.J.; Barsuk, S.; Battistin, M.; Bauche, J.; Bay, A.; Bayliss, V.; Bellagamba, L.; Bencivenni, G.; Bertani, M.; Bezshyyko, O.; Bick, D.; Bingefors, N.; Blondel, A.; Bogomilov, M.; Boyarsky, A.; Bonacorsi, D.; Bondarenko, D.; Bonivento, W.; Borburgh, J.; Bradshaw, T.; Brenner, R.; Breton, D.; Brook, N.; Bruschi, M.; Buonaura, A.; Buontempo, S.; Cadeddu, S.; Calcaterra, A.; Calviani, M.; Campanelli, M.; Capoccia, C.; Cecchetti, A.; Chatterjee, A.; Chauveau, J.; Chepurnov, A.; Chernyavskiy, M.; Ciambrone, P.; Cicalo, C.; Conti, G.; Cornelis, K.; Courthold, M.; Dallavalle, M.G.; D'Ambrosio, N.; De Lellis, G.; De Serio, M.; Dedenko, L.; Di Crescenzo, A.; Di Marco, N.; Dib, C.; Dietrich, J.; Dijkstra, H.; Domenici, D.; Donskov, S.; Druzhkin, D.; Ebert, J.; Egede, U.; Egorov, A.; Egorychev, V.; Alaoui, M. A. El; Enik, T.; Etenko, A.; Fabbri, F.; Fabbri, L.; Fedorova, G.; Felici, G.; Ferro-Luzzi, M.; Fini, R.A.; Franke, M.; Fraser, M.; Galati, G.; Giacobbe, B.; Goddard, B.; Golinka-Bezshyyko, L.; Golubkov, D.; Golutvin, A.; Gorbunov, D.; Graverini, E.; Grenard, J-L; Guler, A.M.; Hagner, C.; Hakobyan, H.; Helo, J.C.; van Herwijnen, E.; Horvath, D.; Iacovacci, M.; Iaselli, G.; Jacobsson, R.; Kadenko, I.; Kamiscioglu, M.; Kamiscioglu, C.; Khaustov, G.; Khotjansev, A.; Kilminster, B.; Kim, V.; Kitagawa, N.; Kodama, K.; Kolesnikov, A.; Kolev, D.; Komatsu, M.; Konovalova, N.; Koretskiy, S.; Korolko, I.; Korzenev, A.; Kovalenko, S.; Kudenko, Y.; Kuznetsova, E.; Lacker, H.; Lai, A.; Lanfranchi, G.; Lauria, A.; Lebbolo, H.; Levy, J. -M.; Lista, L.; Loverre, P.; Lukiashin, A.; Lyubovitskij, V.E.; Malinin, A.; Manfredi, M.; Perillo-Marcone, A.; Marrone, A.; Matev, R.; Messomo, E.N.; Mermod, P.; Mikado, S.; Mikhaylov, Yu.; Miller, J.; Milstead, D.; Mineev, O.; Mingazheva, R.; Mitselmakher, G.; Miyanishi, M.; Monacelli, P.; Montanari, A.; Montesi, M.C.; Morello, G.; Morishima, K.; Movtchan, S.; Murzin, V.; Naganawa, N.; Naka, T.; Nakamura, M.; Nakano, T.; Nurakhov, N.; Obinyakov, B.; Ocalan, K.; Ogawa, S.; Oreshkin, V.; Orlov, A.; Osborne, J.; Pacholek, P.; Panman, J.; Paoloni, A.; Paparella, L.; Pastore, A.; Patel, M.; Petridis, K.; Petrushin, M.; Poli-Lener, M.; Polukhina, N.; Polyakov, V.; Prokudin, M.; Puddu, G.; Pupilli, F.; Rademakers, F.; Rakai, A.; Rawlings, T.; Redi, F.; Ricciardi, S.; Rinaldesi, R.; Roganova, T.; Rogozhnikov, A.; Rokujo, H.; Romaniouk, A.; Rosa, G.; Rostovtseva, I.; Rovelli, T.; Ruchayskiy, O.; Ruf, T.; Saitta, G.; Samoylenko, V.; Samsonov, V.; Ull, A. Sanz; Saputi, A.; Sato, O.; Schmidt-Parzefall, W.; Serra, N.; Sgobba, S.; Shaposhnikov, M.; Shatalov, P.; Shaykhiev, A.; Shchutska, L.; Shevchenko, V.; Shibuya, H.; Shitov, Y.; Silverstein, S.; Simone, S.; Skorokhvatov, M.; Smirnov, S.; Solodko, E.; Sosnovtsev, V.; Spighi, R.; Spinetti, M.; Starkov, N.; Storaci, B.; Strabel, C.; Strolin, P.; Takahashi, S.; Teterin, P.; Tioukov, V.; Tommasini, D.; Treille, D.; Tsenov, R.; Tshchedrina, T.; Ustyuzhanin, A.; Vannucci, F.; Venturi, V.; Villa, M.; Vincke, Heinz; Vincke, Helmut; Vladymyrov, M.; Xella, S.; Yalvac, M.; Yershov, N.; Yilmaz, D.; Yilmazer, A.U.; Vankova-Kirilova, G.; Zaitsev, Y.; Zoccoli, A.; CERN. Geneva. SPS and PS Experiments Committee; SPSC

    2015-01-01

    A new general purpose fixed target facility is proposed at the CERN SPS accelerator which is aimed at exploring the domain of hidden particles and make measurements with tau neutrinos. Hidden particles are predicted by a large number of models beyond the Standard Model. The high intensity of the SPS 400~GeV beam allows probing a wide variety of models containing light long-lived exotic particles with masses below ${\\cal O}$(10)~GeV/c$^2$, including very weakly interacting low-energy SUSY states. The experimental programme of the proposed facility is capable of being extended in the future, e.g. to include direct searches for Dark Matter and Lepton Flavour Violation. The facility will be serviced by a new dedicated beam line branched off the splitter section on the North Area. It is followed by a new target station and a magnetic shield to suppress beam induced background. The proposed orientation of the beam line and the underground complex allows reserving more than 100~m of space beyond the experiment...

  10. ACANTHAMOEBA SP.S-11 PHAGOCYTOTIC ACTIVITY ON MYCOBACTERIUM LEPRAE IN DIFFERENT NUTRIENT CONDITIONS.

    Science.gov (United States)

    Paling, Sepling; Wahyuni, Ratna; Ni'matuzahroh; Winarni, Dwi; Iswahyudi; Astari, Linda; Adriaty, Dinar; Agusni, Indropo; Izumi, Shinzo

    2018-01-01

    Mycobacterium leprae ( M. leprae ) is a pathogenic bacterium that causes leprosy. The presence of M. leprae in the environment is supported by microorganisms that act as the new host for M. leprae . Acanthamoeba 's potential to be a host of M. leprae in the environment. Acanthamoeba sp. is Free Living Amoeba (FLA) that classified as holozoic, saprophytic, and saprozoic. The existence of nutrients in the environment influence Acanthamoeba ability to phagocytosis or pinocytosis. This study is aimed to determine Acanthamoeba sp.S-11 phagocytic activity to Mycobacterium leprae ( M. leprae ) which cultured in non-nutrient media and riched-nutrient media. This research conducted by culturing Acanthamoeba sp.S-11 and M. leprae on different nutrient media conditions. M. leprae intracellular DNA were isolated and amplified by M. leprae specific primers through Real Time PCR (Q-PCR). The results showed that Acanthamoeba co-cultured on non-nutrient media were more active to phagocyte M. leprae than on rich-nutrient media. The use of non-nutrient media is recommended to optimize Acanthamoeba sp. phagocytic activity to M. leprae .

  11. Status of UA9, the Crystal Collimation Experiment in the SPS

    CERN Document Server

    Scandale, W

    2011-01-01

    UA9 was operated at the CERN-SPS for more than two years to investigate the feasibility of halo collimation with bent crystals. Silicon crystals 2 mm long with bending angles of about 170 μrad were used as primary collimators. The crystal collimation process was steadily achieved through channeling, with high efficiency. The crystal orientation was easily set and optimized with an installed goniometer that has an angular accuracy of about ± 10 μrad. In channeling orientation, the loss rate of the halo particles interacting with the crystal is reduced by half an order of magnitude, whilst the residual off momentum halo escaping from the crystal-collimator area is reduced by a factor two to five. The crystal channeling efficiency of about 75% is reasonably consistent with simulations and with single pass data collected in the extracted proton beam of the SPS North Experimental Area. The accumulated observations, shown in this paper, support our expectation that the coherent deflection of the beam halo by a b...

  12. Validity of Scientific Based Chemistry Android Module to Empower Science Process Skills (SPS) in Solubility Equilibrium

    Science.gov (United States)

    Antrakusuma, B.; Masykuri, M.; Ulfa, M.

    2018-04-01

    Evolution of Android technology can be applied to chemistry learning, one of the complex chemistry concept was solubility equilibrium. this concept required the science process skills (SPS). This study aims to: 1) Characteristic scientific based chemistry Android module to empowering SPS, and 2) Validity of the module based on content validity and feasibility test. This research uses a Research and Development approach (RnD). Research subjects were 135 s1tudents and three teachers at three high schools in Boyolali, Central of Java. Content validity of the module was tested by seven experts using Aiken’s V technique, and the module feasibility was tested to students and teachers in each school. Characteristics of chemistry module can be accessed using the Android device. The result of validation of the module contents got V = 0.89 (Valid), and the results of the feasibility test Obtained 81.63% (by the student) and 73.98% (by the teacher) indicates this module got good criteria.

  13. Beam Losses and Lifetime of the LHC Beam in the SPS

    CERN Document Server

    Bohl, T; Shaposhnikova, Elena; Tückmantel, Joachim

    2006-01-01

    Studies of the LHC beam loss in the SPS started in 2003 [1], [2] and continued in 2004. The flat bottom losses strongly depend on the batch intensity and the RF voltage. For beam with the 75 ns spacing at the same bunch intensity they are smaller than for the 25 ns spaced bunches. Large voltage on the flat bottom together with some optimum voltage at injection helps to reduce losses. Analysis of data from 2003 has shown that observations are compatible with a diffusion like process on the flat bottom. Therefore significant time during 2004 was devoted to studies of possible RF noise sources. However the main improvement in beam lifetime on the flat bottom was observed after a change in the working point in the transverse plane (MD on 1.09.2004). In this Note we present measurements of beam loss and lifetime done during several dedicated SPS MDs for different conditions in the ring. Analysis of beam coasts will be presented separately.

  14. Indiana Wesleyan University SPS Physics Outreach to Rural Middle School and High School Students

    Science.gov (United States)

    Ostrander, Joshua; Rose, Heath; Burchell, Robert; Ramos, Roberto

    2013-03-01

    The Society of Physics Students chapter at Indiana Wesleyan University is unusual in that it has no physics major, only physics minors. Yet while just over a year old, IWU-SPS has been active in performing physics outreach to middle school and high school students, and the rural community of Grant County. Our year-old SPS chapter consists of majors from Chemistry, Nursing, Biology, Exercise Science, Computer Science, Psychology, Pastoral Studies, and Science Education, who share a common interest in physics and service to the community. IWU currently has a physics minor and is currently working to build a physics major program. Despite the intrinsic challenges, our multi-disciplinary group has been successful at using physics demonstration equipment and hands-on activities and their universal appeal to raise the interest in physics in Grant County. We report our experience, challenges, and successes with physics outreach. We describe in detail our two-pronged approach: raising the level of physics appreciation among the IWU student community and among pre-college students in a rural community of Indiana. Acknowledgements: We acknowledge the support of the Society of Physics Students through a Marsh White Outreach Award and a Blake Lilly Prize.

  15. Effect of shift work on mental state of factory workers.

    Science.gov (United States)

    Kaneko, Shin-Ya; Maeda, Takafumi; Sasaki, Akihiko; Sato, Akihiko; Tanaka, Kazuko; Kobayashi, Toshio; Tanaka, Masatoshi; Fukushima, Tetsuhito

    2004-06-01

    This paper examines the effects of shift work on the mental state of factory workers. As an indicator of the workers' mental condition, the authors used a scoring system (referred to below as the 'depression tendency score') based on the SRQ-D investigative report. The depression tendency score of the men was higher among the shift worker group than among the regular day worker group (p workers was higher than that of the male regular day workers among skilled workers (p worker group and the shift worker group. However, the depression tendency score of the female two-shift workers was higher than that of the female regular day workers among skilled workers (p work and that of women is affected by two-shift work because of the difference in modern societal/home role between man and woman.

  16. The impact of alternative pricing methods for drugs in California Workers' Compensation System: Fee-schedule pricing.

    Science.gov (United States)

    Wilson, Leslie; Turkistani, Fatema A; Huang, Wei; Tran, Dang M; Lin, Tracy Kuo

    2018-01-01

    California's Workers' Compensation System (CAWCS) Department of Industrial Relations questioned the adequacy of the current Medi-Cal fee-schedule pricing and requested analysis of alternatives that maximize price availability and maintain budget neutrality. To compare CAWCS pharmacy-dispensed (PD) drug prices under alternative fee schedules, and identify combinations of alternative benchmarks that have prices available for the largest percentage of PD drugs and that best reach budget neutrality. Claims transaction-level data (2011-2013) from CAWCS were used to estimate total annual PD pharmaceutical payments. Medi-Cal pricing data was from the Workman's Compensation Insurance System (WCIS). Average Wholesale Prices (AWP), Wholesale Acquisition Costs (WAC), Direct Prices (DP), Federal Upper Limit (FUL) prices, and National Average Drug Acquisition Costs (NADAC) were from Medi-Span. We matched National Drug Codes (NDCs), pricing dates, and drug quantity for comparisons. We report pharmacy-dispensed (PD) claims frequency, reimbursement matching rate, and paid costs by CAWCS as the reference price against all alternative price benchmarks. Of 12,529,977 CAWCS claims for pharmaceutical products 11.6% (1,462,814) were for PD drugs. Prescription drug cost for CAWCS was over $152M; $63.9M, $47.9M, and $40.6M in 2011-2013. Ninety seven percent of these CAWCS PD claims had a Medi-Cal price. Alternative mechanisms provided a price for fewer claims; NADAC 94.23%, AWP 90.94%, FUL 73.11%, WAC 66.98%, and DP 14.33%. Among CAWCS drugs with no Medi-Cal price in PD claims, AWP, WAC, NADAC, DP, and FUL provided prices for 96.7%, 63.14%, 24.82%, 20.83%, and 15.08% of claims. Overall CAWCS paid 100.52% of Medi-Cal, 60% of AWP, 97% of WAC, 309.53% of FUL, 103.83% of DP, and 136.27% of NADAC. CAWCS current Medi-Cal fee-schedule price list for PD drugs is more complete than all alternative fee-schedules. However, all reimbursement approaches would require combinations of pricing benchmarks

  17. The ATLAS inner detector semiconductor tracker (Si and GaAs strips): review of the 1995 beam tests at the CERN SPS H8 beamline

    International Nuclear Information System (INIS)

    Moorhead, G.F.

    1995-01-01

    This talk will consist of a brief review of the ATLAS Inner Detector (ID) Semiconductor Tracker (SCT) strip detector (both silicon and gallium arsenide) beam tests conducted at the ATLAS test beam facility at the CERN SPS H8 beamline. It will include a brief overview of the H8 facilities, the experimental layout of the SCT/Strip apparatus, the data acquisition system, some of the online software tools and the high precision silicon hodoscope and timing modules used. A very brief indication of some of the main varieties of detector systems tested and the measurements performed will be given. Throughout some emphasis will be placed on the contributions and-interests of members of the Melbourne group. (author)

  18. Optics measurements and transfer line matching for the SPS injection of the CERN Multi-Turn Extraction beam

    CERN Document Server

    Benedetto, E; Cettour Cave, S; Follin, F; Gilardoni, S; Giovannozzi, M; Roncarolo, F

    2010-01-01

    Dispersion and beam optics measurements were carried out in the transfer line between the CERN PS and SPS for the new Multi-Turn Extraction beam. Since the extraction conditions of the four islands and the core are different and strongly dependent on the non-linear effects used to split the beam in the transverse plane, a special care was taken during the measurement campaigns. Furthermore, an appropriate strategy was devised to minimize the overall optical mismatch at SPS injection. All this led to a new optical configuration that will be presented in the paper.

  19. Excitation function of particle production from SIS/Bevalac to SPS energies; evidence for a phase transition?

    CERN Document Server

    Ströbele, H

    2005-01-01

    The second part of the title is meant as an incentive to scrutinize the data which will be presented in the following. If the threshold for creating the QGP in nuclear collisions is located in the SPS energy range, it will become evident only by carefully scanning energy and mass dependences of many observables and identifying non monotonous behaviour of several quantities consistently. This contribution, which is a sort of short update of an earlier article, is meant to review the current data on particle production in terms of total yields and ratios, as well transverse and longitudinal kinematical distributions from threshold up to SPS energies.

  20. What is different about workers' compensation patients? Socioeconomic predictors of baseline disability status among patients with lumbar radiculopathy.

    Science.gov (United States)

    Atlas, Steven J; Tosteson, Tor D; Hanscom, Brett; Blood, Emily A; Pransky, Glenn S; Abdu, William A; Andersson, Gunnar B; Weinstein, James N

    2007-08-15

    Combined analysis of 2 prospective clinical studies. To identify socioeconomic characteristics associated with workers' compensation in patients with an intervertebral disc herniation (IDH) or spinal stenosis (SpS). Few studies have compared socioeconomic differences between those receiving or not receiving workers' compensation with the same underlying clinical conditions. Patients were identified from the Spine Patient Outcomes Research Trial (SPORT) and the National Spine Network (NSN) practice-based outcomes study. Patients with IDH and SpS within NSN were identified satisfying SPORT eligibility criteria. Information on disability and work status at baseline evaluation was used to categorize patients into 3 groups: workers' compensation, other disability compensation, or work-eligible controls. Enrollment rates of patients with disability in a clinical efficacy trial (SPORT) and practice-based network (NSN) were compared. Independent socioeconomic predictors of baseline workers' compensation status were identified in multivariate logistic regression models controlling for clinical condition, study cohort, and initial treatment designation. Among 3759 eligible patients (1480 in SPORT and 2279 in NSN), 564 (15%) were receiving workers' compensation, 317 (8%) were receiving other disability compensation, and 2878 (77%) were controls. Patients receiving workers' compensation were less common in SPORT than NSN (9.2% vs. 18.8%, P socioeconomic characteristics significantly differed according to baseline workers' compensation status. In multiple logistic regression analyses, gender, educational level, work characteristics, legal action, and expectations about ability to work without surgery were independently associated with receiving workers' compensation. Clinical trials involving conditions commonly seen in patients with workers' compensation may need special efforts to ensure adequate representation. Socioeconomic characteristics markedly differed between patients