WorldWideScience

Sample records for systems mcnsps conceptual

  1. Megawatt Class Nuclear Space Power Systems (MCNSPS) conceptual design and evaluation report. Volume 2, technologies 1: Reactors, heat transport, integration issues

    Wetch, J. R.

    1988-01-01

    The objectives of the Megawatt Class Nuclear Space Power System (MCNSPS) study are summarized and candidate systems and subsystems are described. Particular emphasis is given to the heat rejection system and the space reactor subsystem.

  2. Conceptualizing smart service systems

    Beverungen, Daniel; Müller, Oliver; Matzner, Martin

    2017-01-01

    Recent years have seen the emergence of physical products that are digitally networked with other products and with information systems to enable complex business scenarios in manufacturing, mobility, or healthcare. These “smart products”, which enable the co-creation of “smart service” that is b......Recent years have seen the emergence of physical products that are digitally networked with other products and with information systems to enable complex business scenarios in manufacturing, mobility, or healthcare. These “smart products”, which enable the co-creation of “smart service......” that is based on monitoring, optimization, remote control, and autonomous adaptation of products, profoundly transform service systems into what we call “smart service systems”. In a multi-method study that includes conceptual research and qualitative data from in-depth interviews, we conceptualize “smart...... service” and “smart service systems” based on using smart products as boundary objects that integrate service consumers’ and service providers’ resources and activities. Smart products allow both actors to retrieve and to analyze aggregated field evidence and to adapt service systems based on contextual...

  3. Research on conceptual design of mechatronic systems

    tems/components on holistic dynamic performance of mechatronic systems ... Conceptual design is a typical ill-definition solving problem. ..... Li R 2004 Research on theory and method of scheme creative design of mechatronic system. School.

  4. Cockpit control system conceptual design

    Meholic, Greg; Brown, Rhonda; Hall, Melissa; Harvey, Robert; Singer, Michael; Tella, Gustavo

    1993-01-01

    The purpose of this project was to provide a means for operating the ailerons, elevator, elevator trim, rudder, nosewheel steering, and brakes in the Triton primary flight trainer. The main design goals under consideration were to illustrate system and subsystem integration, control function ability, and producibility. Weight and maintenance goals were addressed.

  5. Conceptual Spaces of the Immune System.

    Fierz, Walter

    2016-01-01

    The immune system can be looked at as a cognitive system. This is often done in analogy to the neuro-psychological system. Here, it is demonstrated that the cognitive functions of the immune system can be properly described within a new theory of cognitive science. Gärdenfors' geometrical framework of conceptual spaces is applied to immune cognition. Basic notions, like quality dimensions, natural properties and concepts, similarities, prototypes, saliences, etc., are related to cognitive phenomena of the immune system. Constraints derived from treating the immune system within a cognitive theory, like Gärdenfors' conceptual spaces, might well prove to be instrumental for the design of vaccines, immunological diagnostic tests, and immunotherapy.

  6. Deficiency tracking system, conceptual business process requirements

    Hermanson, M.L.

    1997-04-18

    The purpose of this document is to describe the conceptual business process requirements of a single, site-wide, consolidated, automated, deficiency management tracking, trending, and reporting system. This description will be used as the basis for the determination of the automated system acquisition strategy including the further definition of specific requirements, a ''make or buy'' determination and the development of specific software design details.

  7. Deficiency tracking system, conceptual business process requirements

    Hermanson, M.L.

    1997-01-01

    The purpose of this document is to describe the conceptual business process requirements of a single, site-wide, consolidated, automated, deficiency management tracking, trending, and reporting system. This description will be used as the basis for the determination of the automated system acquisition strategy including the further definition of specific requirements, a ''make or buy'' determination and the development of specific software design details

  8. Conceptualization of an intellectual maintenance management system

    Suda, Kazunori; Yonekawa, Tsuyoshi; Yoshikawa, Shinji; Ozawa, Kenji

    1997-04-01

    It is studied in many research institute to enhance availability and safety of nuclear power plants operation and maintenance. On this account, development of autonomous plants has been carried out to replace the role of operators with artificial intelligence and autonomous robots. We have been developing an intellectual maintenance management system since 1994. As the first step, concept of an intellectual maintenance management system was constructed. The intellectual maintenance managerial system is in charge of maintenance function of an autonomous plant. The intellectual maintenance managerial system has three functions which is monitoring state and judging abnormal machine and deciding maintenance plan by autonomy. This system has an important role of indication and communication of the result to an autonomous operation system and autonomous robot. In this examination, we adopted the distributed and cooperative system technique by multi-agent of AI technology and examined a method to enforce problem solving by cooperation of sensor and actuator. In this report, we examined trouble detection and troubleshooting evaluation and maintenance plan decision function by the distributed and cooperative system technology, the distributed and cooperative system communication-function that these information releases functions was taken on. In conceptualization of the intellectual maintenance managerial system, we clarified of major functions to constitute this system and relation between autonomous operation system and autonomous robots. We clarified the information exchange scheme between this system and an outside system furthermore. In future, we will prototype each function and inspect the total system. (author)

  9. Conceptual design study of IFMIF target system

    Kato, Y.; Nakamura, H.; Ida, M.; Maekawa, H.; Katsuta, H.; Hua, T.; Cevolani, S.

    1997-01-01

    IFMIF-CDA (International Fusion Materials Irradiation Facility - Conceptual Design Activity) had been carried out during 1995 and 1996, under the auspices of the IEA. The mission of this facility is to provide an accelerator based deuterium-lithium (D-Li) neutron source to test the candidate materials of radiation - resistant and low - activation materials up to about a full lifetime of anticipated use in fusion energy reactors. The neutrons of about 14 MeV are obtained by the stripping reaction of the deuteron of Max. 40 MeV with target lithium. Total deuteron beam current is about 250 mA and beam footprint is 20 cm x 5 cm on the free surface of lithium jet. In this report general characteristics of the target lithium system and the results of thermal and flow analysis for the target lithium jet are described. (author)

  10. Conceptual Drivers for an Exploration Medical System

    Antonsen, Erik; Hanson, Andrea; Shah, Ronak; Reed, Rebekah; Canga, Michael

    2016-01-01

    Interplanetary spaceflight, such as NASA's proposed three-year mission to Mars, provides unique and novel challenges when compared with human spaceflight to date. Extended distance and multi-year missions introduce new elements of operational complexity and additional risk. These elements include: inability to resupply medications and consumables, inability to evacuate injured or ill crew, uncharted psychosocial conditions, and communication delays that create a requirement for some level of autonomous medical capability. Because of these unique challenges, the approaches used in prior programs have limited application to a Mars mission. On a Mars mission, resource limitations will significantly constrain available medical capabilities, and require a paradigm shift in the approach to medical system design and risk mitigation for crew health. To respond to this need for a new paradigm, the Exploration Medical Capability (ExMC) Element is assessing each Mars mission phase-transit, surface stay, rendezvous, extravehicular activity, and return-to identify and prioritize medical needs for the journey beyond low Earth orbit (LEO). ExMC is addressing both planned medical operations, and unplanned contingency medical operations that meld clinical needs and research needs into a single system. This assessment is being used to derive a gap analysis and studies to support meaningful medical capabilities trades. These trades, in turn, allow the exploration medical system design to proceed from both a mission centric and ethics-based approach, and to manage the risks associated with the medical limitations inherent in an exploration class mission. This paper outlines the conceptual drivers used to derive medical system and vehicle needs from an integrated vision of how medical care will be provided within this paradigm. Keywords: (Max 6 keywords: exploration, medicine, spaceflight, Mars, research, NASA)

  11. Kilowatt isotope power system phase II plan. Volume II: flight System Conceptual Design (FSCD)

    1978-03-01

    The Kilowatt Isotope Power System (KIPS) Flight System Conceptual Design (FSCD) is described. Included are a background, a description of the flight system conceptual design, configuration of components, flight system performance, Ground Demonstration System test results, and advanced development tests

  12. ITER neutral beam system US conceptual design

    Purgalis, P.

    1990-09-01

    In this document we present the US conceptual design of a neutral beam system for International Thermonuclear Experimental Reactor (ITER). The design incorporates a barium surface conversion D - source feeding a linear array of accelerator channels. The system uses a dc accelerator with electrostatic quadrupoles for strong focusing. A high voltage power supply that is integrated with the accelerator is presented as an attractive option. A gas neutralizer is used and residual ions exiting the neutralizer are deflected to water-cooled dumps. Cryopanels are located at the accelerator exit to pump excess gas from the source and the neutralizer, and in the ion dump cavity to pump re-neutralized ions and neutralizer gas. All the above components are packaged in compact identical, independent modules which can be removed for remote maintenance. The neutral beam system delivers 75 MW of DO at 1.3 MeV, into three ports with a total of 9 modules arranged in stacks of three modules per port . To increase reliability each module is designed to deliver up to 10 MW; this allows eight modules operating at partial capacity to deliver the required power in the event one module is out of service, and provides 20% excess capacity to improve availability. Radiation protection is provided by shielding and by locating critical components in the source and accelerator 46.5 m from the torus centerline. Neutron shielding in the drift duct and neutralizer provides the added feature of limiting conductance and thus reducing gas flow to and from the torus

  13. Conceptualizing Debates in Learning and Educational Research: Toward a Complex Systems Conceptual Framework of Learning

    Jacobson, Michael J.; Kapur, Manu; Reimann, Peter

    2016-01-01

    This article proposes a conceptual framework of learning based on perspectives and methodologies being employed in the study of complex physical and social systems to inform educational research. We argue that the contexts in which learning occurs are complex systems with elements or agents at different levels--including neuronal, cognitive,…

  14. Framing Entrepreneurial Ecosystem on Campus: Conceptual and System Considerations

    Milana, Evita; Andersen, Maj Munch; Murdock, Karen

    collective entrepreneurial culture and action at all university dimensions. The paper argues that applying systems thinking to university based entrepreneurship allows achieving a better understanding of universities as entrepreneurial ecosystems. The paper contributes to conceptual developments...

  15. Project W-420 Stack Monitoring system upgrades conceptual design report

    TUCK, J.A.

    1998-01-01

    This document describes the scope, justification, conceptual design, and performance of Project W-420 stack monitoring system upgrades on six NESHAP-designated, Hanford Tank Farms ventilation exhaust stacks

  16. Project W-420 Stack Monitoring system upgrades conceptual design report

    TUCK, J.A.

    1998-11-06

    This document describes the scope, justification, conceptual design, and performance of Project W-420 stack monitoring system upgrades on six NESHAP-designated, Hanford Tank Farms ventilation exhaust stacks.

  17. CONCEPTUAL DESIGN OF THE NSLS-II INJECTION SYSTEM.

    SHAFTAN,T.; ROSE, T.; PINAYEV, I.; HEESE, R.; BENGTSSON, J.; SKARITKA, J.; MENG, W.; OZAKI, S.; MEIER, R.; STELMACH, C.; LITVINENKO, V.; PJEROV, S.; SHARMA, S.; GANETIS, G.; HSEUH, H.C.; JOHNSON, E.D.; TSOUPAS, N.; GUO, W.; BEEBE-WANG, J.; LUCCIO, A.U.; YU, L.H.; RAPARIA, D.; WANG, D.

    2007-06-25

    We present the conceptual design of the NSLS-II injection system [1,2]. The injection system consists of a low-energy linac, booster and transport lines. We review two different injection system configurations; a booster located in the storage ring tunnel and a booster housed in a separate building. We briefly discuss main parameters and layout of the injection system components.

  18. Conceptual design for the ZEPHYR neutral-beam injection system

    Cooper, W.S.; Elischer, V.P.; Goldberg, D.A.; Hopkins, D.B.; Jacobson, V.L.; Lou, K.H.; Tanabe, J.T.

    1981-03-01

    In June 1980, the Lawrence Berkeley Laboratory began a conceptual design study for a neutral beam injection system for the ZEPHYR ignition tokamak proposed by the Max-Planck-Institut fur Plasmaphysik in Garching, Germany. The ZEPHYR project was cancelled, and the LBL design effort concluded prematurely in January 1981. This report describes the conceptual design as it existed at that time, and gives brief consideration to a schedule, but does not deal with costs

  19. Conceptual design for the NSTX Central Instrumentation and Control System

    Bashore, D.; Oliaro, G.; Roney, P.; Sichta, P.; Tindall, K.

    1997-01-01

    The design and construction phase for the National Spherical Torus Experiment (NSTX) is under way at the Princeton Plasma Physics Laboratory (PPPL). Operation is scheduled to begin on April 30, 1999. This paper describes the conceptual design for the NSTX Central Instrumentation and Control (I and C) System. Major elements of the Central I and C System include the Process Control System, Plasma Control System, Network System, Data Acquisition System, and Synchronization System to support the NSTX experimental device

  20. A Conceptual Framework for Evolving, Recommender Online Learning Systems

    Peiris, K. Dharini Amitha; Gallupe, R. Brent

    2012-01-01

    A comprehensive conceptual framework is developed and described for evolving recommender-driven online learning systems (ROLS). This framework describes how such systems can support students, course authors, course instructors, systems administrators, and policy makers in developing and using these ROLS. The design science information systems…

  1. Architectural conceptual definition of the CAREM-25 reactor's control system

    Perez, J.C.; Santome, D.; Drexler, J.; Escudero, S.

    1990-01-01

    This work presents the conceptual definition of the CAREM 25 reactor's digital and monitoring control system structure. The requirements of the system are analyzed and different implementation alternatives are studied where possible basic architectures of the system and its topology are considered and evaluated. (Author) [es

  2. Conceptual design of the national nuclear emergency management information system

    Wang Xingyu; Shi Zhongqi

    2003-01-01

    A Conceptual Design of the National Nuclear Emergency Management Information System was brought forward in this paper, based on the summarization of some emergency management information systems used in China and some other countries. The conceptual system should have four basic characteristics, that are (1) a graphic displaying and querying interface based on GIS (2) data and results shared with the assessment software of nuclear accident (3) a complete set of databases and (4) the capability of on-line data receiving or real-time distributing of the commands and information for emergency response

  3. TFTR neutral beam systems conceptual design

    1976-03-01

    The functions, design requirements, and design descriptions of the injection system are described. Cost summaries are given for each system and subsystem. The costs presented are for: materials procurement; and shipping, assembly, and installation at the Princeton site

  4. Conceptual design of nuclear power plants database system

    Ishikawa, Masaaki; Izumi, Fumio; Sudoh, Takashi.

    1984-03-01

    This report is the result of the joint study on the developments of the nuclear power plants database system. The present conceptual design of the database system, which includes Japanese character processing and image processing, has been made on the data of safety design parameters mainly found in the application documents for reactor construction permit made available to the public. (author)

  5. Preliminary conceptual design of target system. Pt. 1. System configuration

    Hino, Ryutaro; Haga, Katsuhiro; Kaminaga, Masanori [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    1997-07-01

    In the 21st century, neutron is expected to play a very important role in the fields of structural biology, nuclear physics, material science if a very high-intensity neutron source will be built because of its superior nature as an probe to investigate material structure and its function. The Japan Atomic Energy Research Institute has launched the Neutron Science Project for construction and utilization of a high-intensity spallation neutron source coupled with a proton accelerator. In the project, a neutron scattering facility is planned to be constructed in an early stage. Development of a 5MW spallation neutron source is one of the most difficult technical challenges in this project. A two-step development plan of the target was established to construct a 5MW-target station In the 1st step, a 1.5MW target will be constructed to develop 5MW target technology. The preliminary conceptual design was conducted to clarify the specifications of the target system of 1.5MW and 5MW including system layout, scale etc. This report describes (1) a design policy, (2) a layout of system consisting of the target, remote-handling devices, bio-shieldings etc., (3) specifications of components and facilities such as cooling systems for target and moderators, beam-port shutter and air conditioning system, (4) overhaul procedures by remote-handling devices, (5) safety assessment, and (6) necessary R and D items derived from the design activity. (author)

  6. A Study on Conceptual Design of Mechatronic System

    YAO Li-ming; ZOU Ling-lin

    2008-01-01

    The conceptual design of mechatronic systems is addressed under the thrust of concurrent engineering and an enhanced conceptual design methodology describing the early design stage of mechatmnic systems is presented through an example illustration of a pick and place robot.This methodology treats each feasible solution as a solution strategy.In the methodology,Quality Function Deployment (QFD)is used as a baseline for the analysis of the mapping from customers to engineering requirements,Axiomatic Design(AD)is adopted as a guideline to generate feasible,good design solution alternatives,and Theory of Inventive Problem Solving(TRIZ)is applied to deal with domain conflicts in design.

  7. Small pipe characterization system (SPCS) conceptual design

    Anderson, M.O.; Ferrante, T.A.; McKay, M.D.

    1995-01-01

    Throughout the Department of Energy (DOE) complex there are many facilities that have been identified for Decontamination and Decommissioning (D&D). As processes are terminated or brought off-line, facilities are placed on the inactive list, and facility managers and site contractors are required to assure a safe and reliable decommissioning and transition of these facilities to a clean final state. Decommissioning of facilities requires extensive reliable characterization, decontamination and in some cases dismantlement. Characterization of piping systems throughout the DOE complex is becoming more and more necessary. In addition to decommissioning activities, characterization activities are performed as part of surveillance and maintenance (S&M). Because of the extent of contamination, all inactive facilities require some type of S&M. These S&M activities include visual assessment, equipment and material accounting, and maintenance. The majority of the inactive facilities have piping systems 3 inches or smaller that are inaccessible because they are contaminated, imbedded in concrete, or run through hot cells. Many of these piping systems have been inactive for a number of years and there exists no current system condition information or the historical records are poor and/or missing altogether. Many of these piping systems are placed on the contaminated list, not because of known contamination, but because of the risk of internal contamination. Many of the piping systems placed on the contamination list may not have internal contamination. Because there is a potential however, they are treated as such. The cost of D&D can be greatly reduced by identifying and removing hot spot contamination, leaving clean piping to be removed using conventional methods. Accurate characterization of these piping systems is essential before, during and after all D&D activities.

  8. Small pipe characterization system (SPCS) conceptual design

    Anderson, M.O.; Ferrante, T.A.; McKay, M.D.

    1995-01-01

    Throughout the Department of Energy (DOE) complex there are many facilities that have been identified for Decontamination and Decommissioning (D ampersand D). As processes are terminated or brought off-line, facilities are placed on the inactive list, and facility managers and site contractors are required to assure a safe and reliable decommissioning and transition of these facilities to a clean final state. Decommissioning of facilities requires extensive reliable characterization, decontamination and in some cases dismantlement. Characterization of piping systems throughout the DOE complex is becoming more and more necessary. In addition to decommissioning activities, characterization activities are performed as part of surveillance and maintenance (S ampersand M). Because of the extent of contamination, all inactive facilities require some type of S ampersand M. These S ampersand M activities include visual assessment, equipment and material accounting, and maintenance. The majority of the inactive facilities have piping systems 3 inches or smaller that are inaccessible because they are contaminated, imbedded in concrete, or run through hot cells. Many of these piping systems have been inactive for a number of years and there exists no current system condition information or the historical records are poor and/or missing altogether. Many of these piping systems are placed on the contaminated list, not because of known contamination, but because of the risk of internal contamination. Many of the piping systems placed on the contamination list may not have internal contamination. Because there is a potential however, they are treated as such. The cost of D ampersand D can be greatly reduced by identifying and removing hot spot contamination, leaving clean piping to be removed using conventional methods. Accurate characterization of these piping systems is essential before, during and after all D ampersand D activities

  9. Dual PECCS: a cognitive system for conceptual representation and categorization

    Lieto, Antonio; Radicioni, Daniele P.; Rho, Valentina

    2017-03-01

    In this article we present an advanced version of Dual-PECCS, a cognitively-inspired knowledge representation and reasoning system aimed at extending the capabilities of artificial systems in conceptual categorization tasks. It combines different sorts of common-sense categorization (prototypical and exemplars-based categorization) with standard monotonic categorization procedures. These different types of inferential procedures are reconciled according to the tenets coming from the dual process theory of reasoning. On the other hand, from a representational perspective, the system relies on the hypothesis of conceptual structures represented as heterogeneous proxytypes. Dual-PECCS has been experimentally assessed in a task of conceptual categorization where a target concept illustrated by a simple common-sense linguistic description had to be identified by resorting to a mix of categorization strategies, and its output has been compared to human responses. The obtained results suggest that our approach can be beneficial to improve the representational and reasoning conceptual capabilities of standard cognitive artificial systems, and - in addition - that it may be plausibly applied to different general computational models of cognition. The current version of the system, in fact, extends our previous work, in that Dual- PECCS is now integrated and tested into two cognitive architectures, ACT-R and CLARION, implementing different assumptions on the underlying invariant structures governing human cognition. Such integration allowed us to extend our previous evaluation.

  10. Conceptualizing and Advancing Research Networking Systems

    SCHLEYER, TITUS; BUTLER, BRIAN S.; SONG, MEI; SPALLEK, HEIKO

    2013-01-01

    Science in general, and biomedical research in particular, is becoming more collaborative. As a result, collaboration with the right individuals, teams, and institutions is increasingly crucial for scientific progress. We propose Research Networking Systems (RNS) as a new type of system designed to help scientists identify and choose collaborators, and suggest a corresponding research agenda. The research agenda covers four areas: foundations, presentation, architecture, and evaluation. Foundations includes project-, institution- and discipline-specific motivational factors; the role of social networks; and impression formation based on information beyond expertise and interests. Presentation addresses representing expertise in a comprehensive and up-to-date manner; the role of controlled vocabularies and folksonomies; the tension between seekers’ need for comprehensive information and potential collaborators’ desire to control how they are seen by others; and the need to support serendipitous discovery of collaborative opportunities. Architecture considers aggregation and synthesis of information from multiple sources, social system interoperability, and integration with the user’s primary work context. Lastly, evaluation focuses on assessment of collaboration decisions, measurement of user-specific costs and benefits, and how the large-scale impact of RNS could be evaluated with longitudinal and naturalistic methods. We hope that this article stimulates the human-computer interaction, computer-supported cooperative work, and related communities to pursue a broad and comprehensive agenda for developing research networking systems. PMID:24376309

  11. Social Constructionist Family Systems Research: Conceptual Considerations

    Puig, Ana; Koro-Ljungberg, Mirka; Echevarria-Doan, Silvia

    2008-01-01

    The purpose of this article is to illustrate how theory and particularly the theoretical perspective of social constructionism can influence the ways in which scholars conduct qualitative research studies in the area of family systems. The authors argue for the importance of theory in qualitative research projects and promote researchers' clear…

  12. Conceptualizing and Advancing Research Networking Systems.

    Schleyer, Titus; Butler, Brian S; Song, Mei; Spallek, Heiko

    2012-03-01

    Science in general, and biomedical research in particular, is becoming more collaborative. As a result, collaboration with the right individuals, teams, and institutions is increasingly crucial for scientific progress. We propose Research Networking Systems (RNS) as a new type of system designed to help scientists identify and choose collaborators, and suggest a corresponding research agenda. The research agenda covers four areas: foundations, presentation, architecture , and evaluation . Foundations includes project-, institution- and discipline-specific motivational factors; the role of social networks; and impression formation based on information beyond expertise and interests. Presentation addresses representing expertise in a comprehensive and up-to-date manner; the role of controlled vocabularies and folksonomies; the tension between seekers' need for comprehensive information and potential collaborators' desire to control how they are seen by others; and the need to support serendipitous discovery of collaborative opportunities. Architecture considers aggregation and synthesis of information from multiple sources, social system interoperability, and integration with the user's primary work context. Lastly, evaluation focuses on assessment of collaboration decisions, measurement of user-specific costs and benefits, and how the large-scale impact of RNS could be evaluated with longitudinal and naturalistic methods. We hope that this article stimulates the human-computer interaction, computer-supported cooperative work, and related communities to pursue a broad and comprehensive agenda for developing research networking systems.

  13. Conceptual Modelling for Product Configuration Systems

    Shafiee, Sara

    Individual customization of goods and processes in different industries leads to complexity due to a growing mix of products both regarding characteristics of products and support services. In order to eliminate complexity and challenges in product/process customizing, smart IT systems called...... Product Configuration Systems (PCS), have been proposed as the solution both by researchers and practitioners and various benefits are mentioned from utilizing PCSs. Based on the latest literature, there are challenges reported in all phases of PCS projects including planning, development......, and documentation. Moreover, the challenges become more serious when it involves complicated products/processes in engineer-to-order (ETO) companies. The purpose of this thesis is to contribute to the existing knowledge of managing PCS projects by proposing frameworks and tools to address some of the main...

  14. TFTR neutral beam injection system conceptual design

    1975-01-01

    Three subsystems are described in the following chapters: (1) Neutral Beam Injection Line; (2) Power Supplies; and (3) Controls. Each chapter contains two sections: (1) Functions and Design Requirements; this is a brief listing of the requirements of components of the subsystem. (2) Design Description; this section describes the design and cost estimates. The overall performance requirements of the neutral beam injection system are summarized. (MOW)

  15. Conceptual study on advanced PWR system

    Bae, Yoon Young; Chang, M H; Yu, K J; Lee, D J; Cho, B H; Kim, H Y; Yoon, J H; Lee, Y J; Kim, J P; Park, C T; Seo, J K; Kang, H S; Kim, J I; Kim, Y W; Kim, Y H

    1997-07-01

    In this study, the adoptable essential technologies and reference design concept of the advanced reactor were developed and related basic experiments were performed. (1) Once-through Helical Steam Generator: a performance analysis computer code for heli-coiled steam generator was developed for thermal sizing of steam generator and determination of thermal-hydraulic parameters. (2) Self-pressurizing pressurizer : a performance analysis computer code for cold pressurizer was developed. (3) Control rod drive mechanism for fine control : type and function were surveyed. (4) CHF in passive PWR condition : development of the prediction model bundle CHF by introducing the correction factor from the data base. (5) Passive cooling concepts for concrete containment systems: development of the PCCS heat transfer coefficient. (6) Steam injector concepts: analysis and experiment were conducted. (7) Fluidic diode concepts : analysis and experiment were conducted. (8) Wet thermal insulator : tests for thin steel layers and assessment of materials. (9) Passive residual heat removal system : a performance analysis computer code for PRHRS was developed and the conformance to EPRI requirement was checked. (author). 18 refs., 55 tabs., 137 figs.

  16. Conceptual study on advanced PWR system

    Bae, Yoon Young; Chang, M. H.; Yu, K. J.; Lee, D. J.; Cho, B. H.; Kim, H. Y.; Yoon, J. H.; Lee, Y. J.; Kim, J. P.; Park, C. T.; Seo, J. K.; Kang, H. S.; Kim, J. I.; Kim, Y. W.; Kim, Y. H.

    1997-07-01

    In this study, the adoptable essential technologies and reference design concept of the advanced reactor were developed and related basic experiments were performed. 1) Once-through Helical Steam Generator: a performance analysis computer code for heli-coiled steam generator was developed for thermal sizing of steam generator and determination of thermal-hydraulic parameters. 2) Self-pressurizing pressurizer : a performance analysis computer code for cold pressurizer was developed. 3) Control rod drive mechanism for fine control : type and function were surveyed. 4) CHF in passive PWR condition : development of the prediction model bundle CHF by introducing the correction factor from the data base. 5) Passive cooling concepts for concrete containment systems: development of the PCCS heat transfer coefficient. 6) Steam injector concepts: analysis and experiment were conducted. 7) Fluidic diode concepts : analysis and experiment were conducted. 8) Wet thermal insulator : tests for thin steel layers and assessment of materials. 9) Passive residual heat removal system : a performance analysis computer code for PRHRS was developed and the conformance to EPRI requirement was checked. (author). 18 refs., 55 tabs., 137 figs

  17. The conceptual design of the ITER CODAC system

    Farthing, J.; Greenwald, M.; Jo Lister; Izuru Yonekawa

    2006-01-01

    The COntrol Data Access and Communication (CODAC) system for ITER is presently under conceptual design, revising the previous design dating from 1998. The design concentrates on the major perceived challenges: 35-year life of the project for maintenance and evolution; harmonizing strict access security with world-wide participation in the exploitation of ITER; the complexity of CODAC which has to control a large number of disparate procurements systems, 24 hours/365 days; the particular '' in-kind '' procurement of all Plant Systems. The design has so-far concentrated on appropriate methods for combating these challenges. Concepts include: strict application and enforcement of standards for interfacing procured systems at a high '' black-box '' level; reliance on standard high performance networks; reliance on the self-description of the procured systems; maximizing the use of data-driven applications, rather than device-specific coding. The interfacing and procurement specifications will be presented, especially the self-description of '' black-box '' systems, and the boundaries of CODAC will be defined. The breakdown of CODAC into a number of manageable systems and their interfaces will be outlined. The data volumes and data rates will be estimated, suggesting an appropriate conceptual design of the various parts of the CODAC network. There are no required CODAC features which could not be provided with today's tools. However, one element of this conceptual design is to identify areas where ideal solutions are not clearly available for which appropriate R(and)D will be proposed. (author)

  18. Conceptual design for the next JAEA's enterprise resource planning system

    Kimura, Hideo; Aoyagi, Tetsuo; Sakai, Manabu; Sato, Taiichi; Tsuji, Minoru

    2008-11-01

    JAEA developed the ERP (Enterprise Resource Planning) system at the establishment in 2005, aiming to support and enhance its business-critical task such as financial accounting and contract management. We considered the conceptual design of the next ERP system, and we implemented the prototype system to validate its effectiveness. Moreover, we implemented the simple add-on tool for rapid and easy development. At the result, we gauged the future prospects that the XML-centric system which we designed will offer high modularity, flexibility, connectivity between other systems, independence among subsystems. The simple add-on tool also demonstrated its effectiveness. (author)

  19. Conceptual design report for a remotely operated cask handling system

    Yount, J.A.; Berger, J.D.

    Recent advances in remote handling utilizing commercial robotics are conceptually applied to the problem of lowering operator cumulative dose and increasing throughput during cask handling operations in proposed nuclear waste container shipping and receiving facilities. The functional criteria for each subsystem are defined, and candidate systems are described. The report also contains a generic description of a waste receiving facility, to show possible deployment configurations for the equipment

  20. Conceptual design of a commercial tokamak hybrid reactor fueling system

    Matney, K.D.; Donnert, H.J.; Yang, T.F.

    1979-12-01

    A conceptual design of a fuel injection system for CTHR (Commercial Tokamak Hybrid Reactor) is discussed. Initially, relative merits of the cold-fueling concept are compared with those of the hot-fueling concept; that is, fueling where the electron is below 1 eV is compared with fueling where the electron temperature exceeds 100 eV. It is concluded that cold fueling seems to be somewhat more free of drawbacks than hot fueling. Possible implementation of the cold-fueling concept is exploited via frozen-pellet injection. Several methods of achieving frozen-pellet injection are discussed and the light-gas-gun approach is chosen from these possibilities. A modified version of the ORNL Neutral Gas Shielding Model is used to simulate the pellet injection process. From this simulation, the penetration-depth dependent velocity requirement is determined. Finally, with the velocity requirement known, a gas-pressure requirement for the proposed conceptual design is established. The cryogenic fuel-injection and fuel-handling systems are discussed. A possible way to implement the conceptual device is examined along with the attendant effects on the total system

  1. Conceptual design of a commercial tokamak hybrid reactor fueling system

    Matney, K.D.; Donnert, H.J.; Yang, T.F.

    1979-12-01

    A conceptual design of a fuel injection system for CTHR (Commercial Tokamak Hybrid Reactor) is discussed. Initially, relative merits of the cold-fueling concept are compared with those of the hot-fueling concept; that is, fueling where the electron temperature is below 1 eV is compared with fueling where the electron temperature exceeds 100 eV. It is concluded that cold fueling seems to be somewhat more free of drawbacks than hot fueling. Possible implementation of the cold-fueling concept is exploited via frozen-pellet injection. Several methods of achieving frozen-pellet injection are discussed and the light-gas-gun approach is chosen from these possibilities. A modified version of the ORNL Neutral Gas Shielding Model is used to simulate the pellet injection process. From this simulation, the penetration-depth dependent velocity requirement is determined. Finally, with the velocity requirement known, a gas-pressure requirement for the proposed conceptual design is established. The cryogenic fuel-injection and fuel-handling systems are discussed. A possible way to implement the conceptual device is examined along with the attendant effects on the total system

  2. Conceptual design of a commercial tokamak hybrid reactor fueling system

    Matney, K.D.; Donnert, H.J.; Yang, T.F.

    1979-12-01

    A conceptual design of a fuel injection system for CTHR (Commercial Tokamak Hybrid Reactor) is discussed. Initially, relative merits of the cold-fueling concept are compared with those of the hot-fueling concept; that is, fueling where the electron is below 1 eV is compared with fueling where the electron temperature exceeds 100 eV. It is concluded that cold fueling seems to be somewhat more free of drawbacks than hot fueling. Possible implementation of the cold-fueling concept is exploited via frozen-pellet injection. Several methods of achieving frozen-pellet injection are discussed and the light-gas-gun approach is chosen from these possibilities. A modified version of the ORNL Neutral Gas Shielding Model is used to simulate the pellet injection process. From this simulation, the penetration-depth dependent velocity requirement is determined. Finally, with the velocity requirement known, a gas-pressure requirement for the proposed conceptual design is established. The cryogenic fuel-injection and fuel-handling systems are discussed. A possible way to implement the conceptual device is examined along with the attendant effects on the total system.

  3. Conceptual design Alcator C-MOD magnetic systems

    Schultz, J.H.; Becker, H.; Fertl, K.; Gwinn, D.; Montgomery, D.B.; Pierce, N.T.; Pillsbury, R.D. Jr.; Thome, R.J.

    1986-01-01

    The conceptual designs of the magnetic systems for Alcator C-MOD, a proposed tokamak at M.I.T., are described, including the toroidal magnet, the poloidal field coils and the cryogenic system. The toroidal magnet is constructed from rectangular plates, connected by sliding joints. Toroidal magnet forces are contained by a steel superstructure. Poloidal coil system options are largely or wholly inside the TF magnet, in order to control plasmas with high current, strong shaping, and expanded boundaries. All magnets are cryocooled by the natural circulation of boiling liquid nitrogen. 3 refs., 5 figs

  4. Using Annotated Conceptual Models to Derive Information System Implementations

    Anthony Berglas

    1994-05-01

    Full Text Available Producing production quality information systems from conceptual descriptions is a time consuming process that employs many of the world's programmers. Although most of this programming is fairly routine, the process has not been amenable to simple automation because conceptual models do not provide sufficient parameters to make all the implementation decisions that are required, and numerous special cases arise in practice. Most commercial CASE tools address these problems by essentially implementing a waterfall model in which the development proceeds from analysis through design, layout and coding phases in a partially automated manner, but the analyst/programmer must heavily edit each intermediate stage. This paper demonstrates that by recognising the nature of information systems, it is possible to specify applications completely using a conceptual model that has een annotated with additional parameters that guide automated implementation. More importantly, it will be argued that a manageable number of annotations are sufficient to implement realistic applications, and techniques will be described that enabled the author's commercial CASE tool, the Intelligent Develope to automated implementation without requiring complex theorem proving technology.

  5. Conceptual Challenges of the Systemic Approach in Understanding Cell Differentiation.

    Paldi, Andras

    2018-01-01

    The cells of a multicellular organism are derived from a single zygote and genetically identical. Yet, they are phenotypically very different. This difference is the result of a process commonly called cell differentiation. How the phenotypic diversity emerges during ontogenesis or regeneration is a central and intensely studied but still unresolved issue in biology. Cell biology is facing conceptual challenges that are frequently confused with methodological difficulties. How to define a cell type? What stability or change means in the context of cell differentiation and how to deal with the ubiquitous molecular variations seen in the living cells? What are the driving forces of the change? We propose to reframe the problem of cell differentiation in a systemic way by incorporating different theoretical approaches. The new conceptual framework is able to capture the insights made at different levels of cellular organization and considered previously as contradictory. It also provides a formal strategy for further experimental studies.

  6. Conceptual design of Blanket Remote Handling System for CFETR

    Wei, Jianghua; Song, Yuntao; Pei, Kun; Zhao, Wenlong; Zhang, Yu; Cheng, Yong

    2015-01-01

    Highlights: • The concept for the blanket maintenance is carried out, including three sub-systems. • The basic maintenance procedure for blanket between VV and hot cell is carried out. • The primary kinematics study is used to verify the feasibility of BRHS. • Virtual reality is adopted as another approach to verify the concept design. - Abstract: The China Fusion Engineering Testing Reactor (CFETR), which is a new superconducting tokamak device being designed by China, has a mission to achieve a high duty time (0.3–0.5). To accomplish this great mission, the big modular blanket option has been adopted to achieve the high efficiency of the blanket maintenance. Considering this mission and the large and heavy blanket module, a novel conceptual blanket maintenance system for CFETR has been carried out by us over the past year. This paper presents the conceptual design of the Blanket Remote Handling System (BRHS), which mainly comprises the In-Vessel-Maintenance-System (IVMS), Lifting System and Blanket-Tool-Manipulator System (BTMS). The BRHS implements the extraction and replacement between in-vessel (the blanket module operation configuration location) and ex-vessel (inside of the vertical maintenance cask) by the collaboration of these three sub systems. What is more, this paper represents the blanket maintenance procedure between the docking station (between hot cell building and tokamak building) and inside the vacuum vessel, in tokamak building. Virtual reality technology is also used to verify and optimize our concept design.

  7. Conceptual design of Blanket Remote Handling System for CFETR

    Wei, Jianghua, E-mail: weijh@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Song, Yuntao, E-mail: songyt@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); University of Science and Technology of China, Hefei (China); Pei, Kun; Zhao, Wenlong; Zhang, Yu; Cheng, Yong [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China)

    2015-11-15

    Highlights: • The concept for the blanket maintenance is carried out, including three sub-systems. • The basic maintenance procedure for blanket between VV and hot cell is carried out. • The primary kinematics study is used to verify the feasibility of BRHS. • Virtual reality is adopted as another approach to verify the concept design. - Abstract: The China Fusion Engineering Testing Reactor (CFETR), which is a new superconducting tokamak device being designed by China, has a mission to achieve a high duty time (0.3–0.5). To accomplish this great mission, the big modular blanket option has been adopted to achieve the high efficiency of the blanket maintenance. Considering this mission and the large and heavy blanket module, a novel conceptual blanket maintenance system for CFETR has been carried out by us over the past year. This paper presents the conceptual design of the Blanket Remote Handling System (BRHS), which mainly comprises the In-Vessel-Maintenance-System (IVMS), Lifting System and Blanket-Tool-Manipulator System (BTMS). The BRHS implements the extraction and replacement between in-vessel (the blanket module operation configuration location) and ex-vessel (inside of the vertical maintenance cask) by the collaboration of these three sub systems. What is more, this paper represents the blanket maintenance procedure between the docking station (between hot cell building and tokamak building) and inside the vacuum vessel, in tokamak building. Virtual reality technology is also used to verify and optimize our concept design.

  8. A Conceptual Model of the Pasadena Housing System

    Hirshberg, Alan S.; Barber, Thomas A.

    1971-01-01

    During the last 5 years, there have been several attempts at applying systems analysis to complex urban problems. This paper describes one such attempt by a multidisciplinary team of students, engineers, professors, and community representatives. The Project organization is discussed and the interaction of the different disciplines (the process) described. The two fundamental analysis questions posed by the Project were: "Why do houses deteriorate?" and "Why do people move?" The analysis of these questions led to the development of a conceptual system model of housing in Pasadena. The major elements of this model are described, and several conclusions drawn from it are presented.

  9. Conceptual system for removal of plutonium from soils and scrap

    Bruns, L.E.

    1982-01-01

    An integrated conceptual scheme for processing TRU wastes and sediments retrieved from a typical TRU-burial ground is presented. This scheme features (a) use of a High Gradient Magnetic System to separate a TRU (e.g., Pu and Am) fraction containing materials from inert soil particles, (b) leaching of the TRU fraction with HNO 3 -HF and (c) operation of a TOPO-CCl 4 reflux-type solvent extraction system to concentrate actinides into a very small volume of product solution

  10. Conceptual Design of ILC Damping Ring Wiggler Straight Vacuum System

    Marks, S.; Kennedy, K.; Plate, D.; Schlueter, R.D.; Zisman, M.

    2007-01-01

    The positron and electron damping rings for the International Linear Collider will contain long straight sections consisting of twenty wiggler/quadrupole pairs. The wigglers will be based upon the CESR superconducting design. There are a number of challenges associated with the design of the wiggler straight vacuum system, in particular, the absorption of photon power generated by the wigglers. This paper will present the overall conceptual design of the wiggler straight vacuum system developed for the ILC Reference Design Report. Particular emphasis will be placed on photon power load calculations and the absorber design

  11. CONCEPTUAL MODEL OF INFORMATION SYSTEM OF THE AGRICULTURAL ENTERPRISES

    Uladzimir Buts

    2017-02-01

    Full Text Available Abstract. Research subject represented by the theoretical and practical issues use of information resources in the agricultural business. Research aim is to formation of a conceptual model of information system of agricultural enterprises according to the requirements of sustainable development. Research methods. The work is prepared on basis of several scientific methods and approaches including monographic, analytical, computational and constructive methods of mathematical and structural logic simulation of information systems. Research results. Based on the assessment of the results of research information systems in agribusiness, as reflected in the theoretical review, the author designed principles of the information system for the agricultural enterprise for sustainable development of agribusiness. Sphere of application of the research results. State and regional authorities of economic regulation. Agricultural enterprises and farmers.

  12. Conceptual System of Systems Enabling Maritime Dominance in the Littorals

    Holmes, Matt

    2004-01-01

    .... Focusing on only system-of systems (SoS) concepts, we consider a system of only manned platforms, a system of primarily unmanned platforms, and a balanced hybrid system of manned and unmanned platforms...

  13. Conceptual design of tritium accountancy system for LLCB TBM

    Patel, Rudreksh; Sircar, Amit

    2017-01-01

    Lead Lithium Ceramic Breeder (LLCB) Test Blanket Module (TBM) will be tested in ITER for performance evaluation of high grade of heat extraction and tritium breeding. The bred tritium in the breeder materials is extracted and recovered by Tritium Extraction System (TES), whereas tritium permeated from breeder materials to helium coolants, viz., primary coolant and secondary coolant, is recovered by Coolant Purification System (CPS). This recovered tritium has to be accounted before transferring it to tritium plant (i.e., ITER inner fuel). This tritium accountancy is performed by Tritium Accountancy System (TAS). In addition to tritium accountancy, TAS also provides necessary data for the validation of design and modelling tools.In this work, we have presented conceptual design of TAS. It also describes operational philosophy, process parameters, process flow diagram, and interface details with ITER tritium plant. (author)

  14. Mirror hybrid reactor blanket and power conversion system conceptual design

    Schultz, K.R.; Backus, G.A.; Baxi, C.B.; Dee, J.B.; Estrine, E.A.; Rao, R.; Veca, A.R.

    1976-01-01

    The conceptual design of the blanket and power conversion system for a gas-cooled mirror hybrid fusion-fission reactor is presented. The designs of the fuel, blanket module and power conversion system are based on existing gas-cooled fission reactor technology that has been developed at General Atomic Company. The uranium silicide fuel is contained in Inconel-clad rods and is cooled by helium gas. The fuel is contained in 16 spherical segment modules which surround the fusion plasma. The hot helium is used to raise steam for a conventional steam cycle turbine generator. The details of the method of support for the massive blanket modules and helium ducts remain to be determined. Nevertheless, the conceptual design appears to be technically feasible with existing gas-cooled technology. A preliminary safety analysis shows that with the development of a satisfactory method of primary coolant circuit containment and support, the hybrid reactor could be licensed under existing Nuclear Regulatory Commission regulations

  15. Conceptual design of neutron diagnostic systems for fusion experimental reactor

    Iguchi, T.; Kaneko, J.; Nakazawa, M.

    1994-01-01

    Neutron measurement in fusion experimental reactors is very important for burning plasma diagnostics and control, monitoring of irradiation effects on device components, neutron source characterization for in-situ engineering tests, etc. A conceptual design of neutron diagnostic systems for an ITER-like fusion experimental reactor has been made, which consists of a neutron yield monitor, a neutron emission profile monitor and a 14-MeV spectrometer. Each of them is based on a unique idea to meet the required performances for full power conditions assumed at ITER operation. Micro-fission chambers of 235 U (and 238 U) placed at several poloidal angles near the first wall are adopted as a promising neutron yield monitor. A collimated long counter system using a 235 U fission chamber and graphite neutron moderators is also proposed to improve the calibration accuracy of absolute neutron yield determination

  16. Conceptual design of SC magnet system for ITER, (5)

    Nakajima, Hideo; Nishi, Masataka; Yoshida, Kiyoshi; Tsuji, Hiroshi; Egusa, Shigenori; Seguchi, Tadao; Hagiwara, Miyuki; Kirk, M.A.; Birtcher, R.C.

    1991-08-01

    Japan Atomic Energy Research Institute (JAERI) has been developing a superconducting magnet system for a fusion reactor. One of the key items in developing the superconducting magnets is material development and evaluation. The data of superconducting materials, structural alloys, and non-metallic materials are generated to establish a material data base at JAERI. This report is prepared to provide available data generated by JAERI to designers of superconducting magnets throughout the world. The following review papers written for the International Thermonuclear Experimental Reactor (ITER) report on conceptual design of magnet system are combined here. I. Superconducting Material Data II. Mechanical Properties of the Japanese Cryogenic Steels (JCS) at Cryogenic Temperature III. Review of Radiation Degradation Studies at JAERI on Composite Organic Insulators Used in Fusion Magnets (author)

  17. Conceptual design study of the K-DEMO magnet system

    Kim, Keeman, E-mail: kkeeman@nfri.re.kr [National Fusion Research Institute, 169-148 Gwahak-ro, Daejeon 305-806 (Korea, Republic of); Oh, Sangjun; Park, Jong Sung; Lee, Chulhee; Im, Kihak; Kim, Hyung Chan; Lee, Gyung-Su [National Fusion Research Institute, 169-148 Gwahak-ro, Daejeon 305-806 (Korea, Republic of); Neilson, George; Brown, Thomas; Kessel, Charles; Titus, Peter; Zhai, Yuhu [Princeton Plasma Physics Laboratory, Princeton, NJ 08543 (United States)

    2015-10-15

    Highlights: • Perform a preliminary conceptual study for a steady-state Korean DEMO reactor. • Present a preliminary design of TF (toroidal field) magnet. • Present a preliminary design of CS (central solenoid) magnet. • Present a preliminary design of PF (toroidal field) magnet. - Abstract: As the ITER is being constructed, there is a growing anticipation for an earlier realization of fusion energy. A major design philosophy for the initiated conceptual design study for a steady-state Korean fusion demonstration reactor (K-DEMO) is engineering feasibility. A two-staged development plan is envisaged. K-DEMO is designed not only to demonstrate a net electricity generation and a self-sustained tritium cycle, but also to be used, in its initial stage, as a component test facility. Then, in its second stage, a major upgrade is carried out by replacing in-vessel components in order to show a net electricity generation on the order of 500 MWe. After a thorough 0-D system analysis, the major radius and minor radius are chosen to be 6.8 m and 2.1 m, respectively. In order to minimize wave deflection, a top-launch high frequency (>200 GHz) electron cyclotron current drive (ECCD) system will be the key system for the current profile control. For matching the high frequency ECCD, a high toroidal field (TF) is required and can be achieved by using high current density Nb{sub 3}Sn superconducting conductor. The peak magnetic field reaches to 16 T with the magnetic field at the plasma center above 7 T. Key features of the K-DEMO magnet system include the use of two TF coil winding packs, each of a different conductor design, to reduce the construction cost and save the space for the magnet structure material.

  18. Conceptual design study of the K-DEMO magnet system

    Kim, Keeman; Oh, Sangjun; Park, Jong Sung; Lee, Chulhee; Im, Kihak; Kim, Hyung Chan; Lee, Gyung-Su; Neilson, George; Brown, Thomas; Kessel, Charles; Titus, Peter; Zhai, Yuhu

    2015-01-01

    Highlights: • Perform a preliminary conceptual study for a steady-state Korean DEMO reactor. • Present a preliminary design of TF (toroidal field) magnet. • Present a preliminary design of CS (central solenoid) magnet. • Present a preliminary design of PF (toroidal field) magnet. - Abstract: As the ITER is being constructed, there is a growing anticipation for an earlier realization of fusion energy. A major design philosophy for the initiated conceptual design study for a steady-state Korean fusion demonstration reactor (K-DEMO) is engineering feasibility. A two-staged development plan is envisaged. K-DEMO is designed not only to demonstrate a net electricity generation and a self-sustained tritium cycle, but also to be used, in its initial stage, as a component test facility. Then, in its second stage, a major upgrade is carried out by replacing in-vessel components in order to show a net electricity generation on the order of 500 MWe. After a thorough 0-D system analysis, the major radius and minor radius are chosen to be 6.8 m and 2.1 m, respectively. In order to minimize wave deflection, a top-launch high frequency (>200 GHz) electron cyclotron current drive (ECCD) system will be the key system for the current profile control. For matching the high frequency ECCD, a high toroidal field (TF) is required and can be achieved by using high current density Nb_3Sn superconducting conductor. The peak magnetic field reaches to 16 T with the magnetic field at the plasma center above 7 T. Key features of the K-DEMO magnet system include the use of two TF coil winding packs, each of a different conductor design, to reduce the construction cost and save the space for the magnet structure material.

  19. Conceptual design of autonomous operation system for nuclear power plants

    Endou, A.; Saiki, A.; Miki, T.; Himeno, Y.

    1993-01-01

    Conceptual design of an autonomous operation system for nuclear power plants has been carried out. Prime objective is to grade up operation reliability by eliminating human factors and enhancing control capabilities. For this objective, operators' role and traditional controllers are replaced with artificial intelligence (AI). Norms of autonomy are defined as (a) to maintain its own basic functions, (b) to protect oneself from catastrophic events, (c) to reorganize oneself in case of its partial failure, (d) to harmonize with the environment, and (e) to improve its performance by itself. For the present, a great emphasis is put on realizing humanlike knowledge-based decision-making process by AI in accordance with the norms (a) and (c). To do this, the authors take a model-based approach and it is intended to make modeling of a problem-solving process from multiple viewpoints and structurization of knowledge used in the process. A hierarchical distributed cooperative system configuration is adopted to allow to dynamically reorganize system functions and it is realized by an object-oriented multi-agent system. Plural agents based on different methodology from each other are applied to individual function or methodology diversity is assured to prevent loss of system functions by common cause failure and to reorganize integrant agents. A prototype autonomous operation system is now under development. (orig.)

  20. Stakeholder Participation in System Change: A New Conceptual Model.

    O'Rourke, Tammy; Higuchi, Kathryn S; Hogg, William

    2016-08-01

    A recent change in Canada's primary care system led to the introduction of Nurse Practitioner-Led clinics. The literature suggests that stakeholders can influence system change initiatives. However, very little is known about healthcare stakeholder motivations, particularly stakeholders who are seen as resistors to change. To examine stakeholder participation in the system change process that led to the introduction of the first Nurse Practitioner-Led clinic in Ontario. This single case study included two site visits, semistructured individual tape-recorded interviews, and the examination of relevant public documents. Qualitative content analysis was used to analyze the data. Sixteen individuals from different healthcare sectors and professions participated in the interviews and 20 documents were reviewed. Six key themes emerged from the data. Linking Evidence to Action The findings from the study present a new perspective on stakeholder participation that includes both those who supported the proposed change and those who advocated for a different change. The findings identify stakeholder activities used to shape, share, and protect their visions for system change. The conceptual model presented in this study adds to the understanding of challenges and complexities involved in healthcare system change. Understanding why and how stakeholders participate in change can help healthcare leaders in planning activities to enhance stakeholder involvement in healthcare system change. © 2016 Sigma Theta Tau International.

  1. Conceptual design of SC magnet system for ITER, (6)

    Yoshida, Kiyoshi; Sugimoto, Makoto; Tsuji, Hiroshi

    1991-08-01

    The International Thermonuclear Experimental Reactor (ITER) is an experimental thermonuclear tokamak reactor in order to test the basic physics performance and technologies. The conceptual design activity (CDA) of ITER required the joint work at a technical site at the Max Plank Institute for Plasma Physics in the Garching, Germany from 1988 to 1990. The technical proposals from Japan were summarized by the Fusion Experimental Reactor (FER) Team and the Superconducting Magnet Laboratory of the Japan Atomic Energy Research Institute (JAERI). This paper describes the Japanese contributions of the R and D proposals to the magnet system for the ITER. These proposals were discussed in ITER CDA design team and summarized in ITER Technical report No. 20. The development program of Toroidal Field Coil is basically proposed from Japan with the design and analysis reports. The Japanese proposals are almost adopted in the ITER Long-Term R and D program. (author)

  2. Conceptual design of an emergency tritium clean-up system

    Muller, M.E.

    1978-01-01

    The Los Alamos Scientific Laboratory (LASL) has been selected by the Department of Energy (DOE) to design, build, and operate a facility to demonstrate the operability of the tritium-related subsystems that would be required to successfully develop fusion reactor systems. An emergency tritium clean-up subsystem (ETC) for this facility will be designed to remove tritium from the cell atmosphere if an accident causes the primary and secondary tritium containment to be breached. Conceptually, the ETC will process cell air at the rate of 0.65 actual m 3 /s and will achieve an overall decontamination factor of 10 6 per tritium oxide (T 2 O). Following the maximum credible release of 100 g of tritium, the ETC will restore the cell to opertional status within 24 h without a significant release of tritium to the environment

  3. SP-100 power system conceptual design for lunar base applications

    Mason, L.S.; Bloomfield, H.S.; Hainley, D.C.

    1989-01-01

    A conceptual design is presented for a nuclear power system utilizing an SP-100 reactor and multiple Stirling cycle engines for operation on the lunar surface. Based on the results of this study, it was concluded that this power plant could be a viable option for an evolutionary lunar base. The design concept consists of a 2500 kWt (kilowatt thermal) SP-100 reactor coupled to eight free-piston Stirling engines. Two of the engines are held in reserve to provide conversion system redundancy. The remaining engines operate at 91.7 percent of their rated capacity of 150 kWe. The design power level for this system is 825 kWe. Each engine has a pumped heat-rejection loop connected to a heat pipe radiator. Power system performance, sizing, layout configurations, shielding options, and transmission line characteristics are described. System components and integration options are compared for safety, high performance, low mass, and ease of assembly. The power plant was integrated with a proposed human lunar base concept to ensure mission compatibility. This study should be considered a preliminary investigation; further studies are planned to investigate the effect of different technologies on this baseline design

  4. Conceptual design of the HTTR-IS hydrogen production system

    Sakaba, Nariaki; Sato, Hiroyuki; Hara, Teruo; Kato, Ryoma; Ohashi, Kazutaka; Nishihara, Tetsuo; Kunitomi, Kazuhiko

    2007-08-01

    Since hydrogen produced by nuclear should be economically competitive compared with other methods in a hydrogen society, it is important to build hydrogen production system to be coupled with the reactor as a conventional chemical plant. Japan Atomic Energy Agency started the safety study to establish a new safety philosophy to meet safety requirements for non-nuclear grade hydrogen production system. Also, structural concepts with integrating functions for the Bunsen reactor and sulphuric acid decomposer were proposed to reduce construction cost of the IS process hydrogen production system. In addition, HI decomposer which enables the process condition to be eased consisting of conventional materials and technologies was studied. Moreover, technical feasibility of the HTTR-IS system in which the hydrogen production rate of 1,000 Nm 3 /h by using the supplied heat of 10 MW from the intermediate heat exchanger of the HTTR was confirmed. This paper describes the conceptual design of the HTTR-IS hydrogen production system. (author)

  5. Conceptual design of the ECH upper launcher system for ITER

    Heidinger, R.; Bertizzolo, R.; Bruschi, A.; Chavan, R.; Cirant, S.; Collazos, A.; de Baar, M.; Elzendoorn, B.; Farina, D.; Fischer, U.; Gafert, J.; Gandini, F.; Gantenbein, G.; Goede, A.; Goodman, T.; Hailfinger, G.; Henderson, M.; Kasparek, W.; Kleefeldt, K.; Landis, J.-D.

    2009-01-01

    The challenge of developing the conceptual design of the ECH Upper Launcher system for MHD control in the ITER plasmas has been tackled by team of European Associations together with the European Domestic Agency ('F4E'). The launcher system has to meet the following requirements: (a) a mm-wave system extending from the interface to the transmission line up to the target absorption zone in the plasma and performing as an intelligent antenna; (b) a structural system integrating the mm-wave system and ensuring sufficient thermal and nuclear shielding; (c) port plug remote handling and testing capability ensuring high port plug system availability. The paper describes the reference launcher design. The mm-wave system is composed of waveguide and quasi-optical sections with a front steering system. An automated feedback control system is developed as a concept based on an assimilation procedure between predicted and diagnosed absorption location. The structural system consists of the blanket shield module, the port plug frame, and the internal shield for appropriate neutron shielding towards the launcher back-end. The specific advantages of a double walled structure are discussed with respect to adequate baking, to rigidity towards launcher deflection under plasma-generated loads and to removal of thermal loads, including nuclear ones. Basic studies of remote handling (RH) to validate design development are initiated using a virtual reality simulation backed by experimental validation, for which a launcher handling test facility (LHT) is set up as a full scale experimental site allowing furthermore thermohydraulic studies with ITER blanket water parameters.

  6. Conceptual Design of a Small Hybrid Unmanned Aircraft System

    Umberto Papa

    2017-01-01

    Full Text Available UAS (Unmanned Aircraft System technologies are today extremely required in various fields of interest, from military to civil (search and rescue, environmental surveillance and monitoring, and entertainment. Besides safety and legislative issues, the main obstacle to civilian applications of UAS systems is the short time of flight (endurance, which depends on the equipped power system (battery pack and the flight mission (low/high speed or altitude. Long flight duration is fundamental, especially with tasks that require hovering capability (e.g., river flow monitoring, earthquakes, devastated areas, city traffic monitoring, and archeological sites inspection. This work presents the conceptual design of a Hybrid Unmanned Aircraft System (HUAS, merging a commercial off-the-shelf quadrotor and a balloon in order to obtain a good compromise between endurance and weight. The mathematical models for weights estimation and balloon static performance analysis are presented, together with experimental results in different testing scenarios and complex environments, which show 50% improvement of the flight duration.

  7. The effect of requirements prioritization on avionics system conceptual design

    Lorentz, John

    This dissertation will provide a detailed approach and analysis of a new collaborative requirements prioritization methodology that has been used successfully on four Coast Guard avionics acquisition and development programs valued at $400M+. A statistical representation of participant study results will be discussed and analyzed in detail. Many technically compliant projects fail to deliver levels of performance and capability that the customer desires. Some of these systems completely meet "threshold" levels of performance; however, the distribution of resources in the process devoted to the development and management of the requirements does not always represent the voice of the customer. This is especially true for technically complex projects such as modern avionics systems. A simplified facilitated process for prioritization of system requirements will be described. The collaborative prioritization process, and resulting artifacts, aids the systems engineer during early conceptual design. All requirements are not the same in terms of customer priority. While there is a tendency to have many thresholds inside of a system design, there is usually a subset of requirements and system performance that is of the utmost importance to the design. These critical capabilities and critical levels of performance typically represent the reason the system is being built. The systems engineer needs processes to identify these critical capabilities, the associated desired levels of performance, and the risks associated with the specific requirements that define the critical capability. The facilitated prioritization exercise is designed to collaboratively draw out these critical capabilities and levels of performance so they can be emphasized in system design. Developing the purpose, scheduling and process for prioritization events are key elements of systems engineering and modern project management. The benefits of early collaborative prioritization flow throughout the

  8. Whole-arm obstacle avoidance system conceptual design

    Wintenberg, A.L.; Butler, P.L.; Babcock, S.M.; Ericson, M.N.; Britton, C.L. Jr.

    1993-04-01

    Whole-arm obstacle avoidance is needed for a variety of robotic applications in the Environmental Restoration and Waste Management (ER ampersand WM) Program. Typical industrial applications of robotics involve well-defined workspaces, allowing a predetermined knowledge of collision-free paths for manipulator motion. In the unstructured or poorly defined hazardous environments of the ER ampersand WM Program, the potential for significant problems resulting from collisions between manipulators and the environment in which they are utilized is great. The conceptual design for a sensing system that will provide protection against such collisions is described herein. The whole-arm obstacle avoidance system consists of a set of sensor ''bracelets,'' which cover the surface area of the manipulator links to the maximum extent practical, and a host processor. The host processor accepts commands from the robot control system, controls the operation of the sensors, manipulates data received from the bracelets, and makes the data available to the manipulator control system. The bracelets consist of a subset of the sensors, associated sensor interface electronics, and a bracelet interface. Redundant communications links between the host processor and the bracelets are provided, allowing single-point failure protection. The system allows reporting of 8-bit data from up to 1000 sensors at a minimum of 50 Hz. While the initial prototype implementation of the system utilizes capacitance proximity sensor, the system concept allows multiple types of sensors. These sensors are uniquely addressable, allowing remote calibration, thresholding at the bracelet, and correlation of a sensor measurement with the associated sensor and its location on the manipulator. Variable resolution allows high-speed, single-bit sensing as well as lower-speed higher-resolution sensing, which is necessary for sensor calibration and potentially useful in control

  9. Conceptual design of SC magnet system for ITER, (2)

    Koizumi, Koichi; Hasegawa, Mitsuru; Yoshida, Kiyoshi

    1991-08-01

    The International Thermonuclear Experimental Reactor (ITER) is an experimental tokamak machine testing the basic plasma performance and technologies required for future tokamak reactor. The design proposals for the Superconducting (SC) Magnet System from Japan were summarized by the Fusion Experimental Reactor (FER) Design Team and the Superconducting Magnet Laboratory of the Japan Atomic Energy Research Institute (JAERI). This report is one of the series reports on 'Conceptual design of superconducting magnet system for ITER', and describes the major results of the stress analysis regarding the Toroidal Field (TF) coil, the Center Solenoid (CS) coil and the Equilibrium Field (EF) coil and their support structures. Among the design issues, the mechanical design of the coil system was one of the most critical items, not only because of the huge electromagnetic loads due to large size and high magnetic field, but also because of the demand of high reliability under neutron irradiation. In order to satisfy both the coil performance and the mechanical reliability, different types of conductors were employed for each coils. The mechanical behaviors and the safety margin of each coil were analyzed by using finite element method (FEM) of MSC/NASTRAN. The procedure to obtain the equivalent winding stiffness employed for the each FEM analysis is also described in this report. The details on the coil specifications, conductor design and mechanical design for each coils are described in other report of the series reports. (J.P.N.)

  10. Controlled Ecological Life Support Systems (CELSS) conceptual design option study

    Oleson, Melvin; Olson, Richard L.

    1986-01-01

    Results are given of a study to explore options for the development of a Controlled Ecological Life Support System (CELSS) for a future Space Station. In addition, study results will benefit the design of other facilities such as the Life Sciences Research Facility, a ground-based CELSS demonstrator, and will be useful in planning longer range missions such as a lunar base or manned Mars mission. The objectives were to develop weight and cost estimates for one CELSS module selected from a set of preliminary plant growth unit (PGU) design options. Eleven Space Station CELSS module conceptual PGU designs were reviewed, components and subsystems identified and a sensitivity analysis performed. Areas where insufficient data is available were identified and divided into the categories of biological research, engineering research, and technology development. Topics which receive significant attention are lighting systems for the PGU, the use of automation within the CELSS system, and electric power requirements. Other areas examined include plant harvesting and processing, crop mix analysis, air circulation and atmosphere contaminant flow subsystems, thermal control considerations, utility routing including accessibility and maintenance, and nutrient subsystem design.

  11. Retrievable surface storage facility conceptual system design description

    1977-03-01

    The studies evaluated several potentially attractive methods for processing and retrievably storing high-level radioactive waste after delivery to the Federal repository. These studies indicated that several systems could be engineered to safely store the waste, but that the simplest and most attractive concept from a technical standpoint would be to store the waste in a sealed stainless steel canister enclosed in a 2 in. thick carbon steel cask which in turn would be inserted into a reinforced concrete gamma-neutron shield, which would also provide the necessary air-cooling through an air annulus between the cask and the shield. This concept best satisfies the requirements for safety, long-term exposure to natural phenomena, low capital and operating costs, retrievability, amenability to incremental development, and acceptably small environmental impact. This document assumes that the reference site would be on ERDA's Hanford reservation. This document is a Conceptual System Design Description of the facilities which could satisfy all of the functional requirements within the established basic design criteria. The Retrievable Surface Storage Facility (RSSF) is planned with the capacity to process and store the waste received in either a calcine or glass/ceramic form. The RSSF planning is based on a modular development program in which the modular increments are constructed at rates matching projected waste receipts.

  12. Retrievable surface storage facility conceptual system design description

    1977-03-01

    The studies evaluated several potentially attractive methods for processing and retrievably storing high-level radioactive waste after delivery to the Federal repository. These studies indicated that several systems could be engineered to safely store the waste, but that the simplest and most attractive concept from a technical standpoint would be to store the waste in a sealed stainless steel canister enclosed in a 2 in. thick carbon steel cask which in turn would be inserted into a reinforced concrete gamma-neutron shield, which would also provide the necessary air-cooling through an air annulus between the cask and the shield. This concept best satisfies the requirements for safety, long-term exposure to natural phenomena, low capital and operating costs, retrievability, amenability to incremental development, and acceptably small environmental impact. This document assumes that the reference site would be on ERDA's Hanford reservation. This document is a Conceptual System Design Description of the facilities which could satisfy all of the functional requirements within the established basic design criteria. The Retrievable Surface Storage Facility (RSSF) is planned with the capacity to process and store the waste received in either a calcine or glass/ceramic form. The RSSF planning is based on a modular development program in which the modular increments are constructed at rates matching projected waste receipts

  13. Conceptual Model of Offshore Wind Environmental Risk Evaluation System

    Anderson, Richard M.; Copping, Andrea E.; Van Cleve, Frances B.; Unwin, Stephen D.; Hamilton, Erin L.

    2010-06-01

    In this report we describe the development of the Environmental Risk Evaluation System (ERES), a risk-informed analytical process for estimating the environmental risks associated with the construction and operation of offshore wind energy generation projects. The development of ERES for offshore wind is closely allied to a concurrent process undertaken to examine environmental effects of marine and hydrokinetic (MHK) energy generation, although specific risk-relevant attributes will differ between the MHK and offshore wind domains. During FY10, a conceptual design of ERES for offshore wind will be developed. The offshore wind ERES mockup described in this report will provide a preview of the functionality of a fully developed risk evaluation system that will use risk assessment techniques to determine priority stressors on aquatic organisms and environments from specific technology aspects, identify key uncertainties underlying high-risk issues, compile a wide-range of data types in an innovative and flexible data organizing scheme, and inform planning and decision processes with a transparent and technically robust decision-support tool. A fully functional version of ERES for offshore wind will be developed in a subsequent phase of the project.

  14. Automatic performance estimation of conceptual temperature control system design for rapid development of real system

    Jang, Yu Jin

    2013-01-01

    This paper presents an automatic performance estimation scheme of conceptual temperature control system with multi-heater configuration prior to constructing the physical system for achieving rapid validation of the conceptual design. An appropriate low-order discrete-time model, which will be used in the controller design, is constructed after determining several basic factors including the geometric shape of controlled object and heaters, material properties, heater arrangement, etc. The proposed temperature controller, which adopts the multivariable GPC (generalized predictive control) scheme with scale factors, is then constructed automatically based on the above model. The performance of the conceptual temperature control system is evaluated by using a FEM (finite element method) simulation combined with the controller.

  15. Automatic performance estimation of conceptual temperature control system design for rapid development of real system

    Jang, Yu Jin [Dongguk University, GyeongJu (Korea, Republic of)

    2013-07-15

    This paper presents an automatic performance estimation scheme of conceptual temperature control system with multi-heater configuration prior to constructing the physical system for achieving rapid validation of the conceptual design. An appropriate low-order discrete-time model, which will be used in the controller design, is constructed after determining several basic factors including the geometric shape of controlled object and heaters, material properties, heater arrangement, etc. The proposed temperature controller, which adopts the multivariable GPC (generalized predictive control) scheme with scale factors, is then constructed automatically based on the above model. The performance of the conceptual temperature control system is evaluated by using a FEM (finite element method) simulation combined with the controller.

  16. Student Learning of Complex Earth Systems: Conceptual Frameworks of Earth Systems and Instructional Design

    Scherer, Hannah H.; Holder, Lauren; Herbert, Bruce

    2017-01-01

    Engaging students in authentic problem solving concerning environmental issues in near-surface complex Earth systems involves both developing student conceptualization of Earth as a system and applying that scientific knowledge using techniques that model those used by professionals. In this first paper of a two-part series, we review the state of…

  17. Conceptual design of EAST flexible in-vessel inspection system

    Peng, X.B.; Song, Y.T.; Li, C.C.; Lei, M.Z.; Li, G.

    2010-01-01

    Remote handling technology, especially the flexible in-vessel inspection system (FIVIS) without breaking the working condition of the vacuum vessel, has been identified as one major challenge on the maintenance for the future tokamak fusion reactor. The FIVIS introduced here is specially developed for EAST superconducting tokamak that has actively cooled plasma facing components (PFCs). It aims flexible close-up inspection of EAST PFCs to help the understanding of operation issues that could occur in the vacuum vessel. This paper resumes the preliminary work of the FIVIS project, including the requirement analysis and the development of the conceptual design. The FIVIS consists out of a long reach multi-articulated manipulator and a process tool. The manipulator has a modular design for its subsystems and can reach all areas of the first wall in the distance of 15 mm and in the range of ±90 o along toroidal direction. It will be folded and hidden in the designated horizontal port during plasma discharge period.

  18. Conceptual design of EAST multi-purpose maintenance deployer system

    Pan, Hongtao [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd, Hefei, Anhui (China); University of Science and Technology of China, Hefei, Anhui 230022 (China); He, Kaihui, E-mail: hekh@iterchina.cn [China International Nuclear Fusion Energy Program Execution Center, Beijing 100862 (China); Cheng, Yong [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd, Hefei, Anhui (China); Song, Yuntao [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd, Hefei, Anhui (China); University of Science and Technology of China, Hefei, Anhui 230022 (China); Yang, Yang [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd, Hefei, Anhui (China); Villedieu, Eric [CEA-IRFM, F-13108 Saint-Paul-Lez-Durance (France); Shi, Shanshuang; Yang, Songzhu [Institute of Plasma Physics, Chinese Academy of Sciences, 350 Shushanhu Rd, Hefei, Anhui (China)

    2017-05-15

    Highlights: • A redundant 11-DOF articulated robot for EAST in-vessel maintenance is presented. • A new modular joint developed to optimize the yaw joint actuator for the robot is described. • A 3-DOF gripper integrated with cameras and torque sensor is developed. - Abstract: EAST multi-purpose maintenance deployer (EMMD) system, being collaboratively developed by ASIPP and CEA-IRFM, is built as upgrades for EAMA. Updated kinematics parameters such as DOF distribution and joint angle for EMMD robot are performed and verified in a simulation platform. A new modular joint has been developed to optimize the yaw joint actuator for easy assembly and flexibility reduction. A 3-DOF gripper with cameras and torque sensor has been designed to provide inspection and dexterous handling of small fragments inside the EAST chamber. A conceptual upgrade for EAMA-CASK has been developed for the purpose of protecting the end-effector's sensors which do not have temperature-resistant qualification. The high temperature and vacuum compatible solutions and validation experiments have been presented in this paper.

  19. Conceptual design of EAST multi-purpose maintenance deployer system

    Pan, Hongtao; He, Kaihui; Cheng, Yong; Song, Yuntao; Yang, Yang; Villedieu, Eric; Shi, Shanshuang; Yang, Songzhu

    2017-01-01

    Highlights: • A redundant 11-DOF articulated robot for EAST in-vessel maintenance is presented. • A new modular joint developed to optimize the yaw joint actuator for the robot is described. • A 3-DOF gripper integrated with cameras and torque sensor is developed. - Abstract: EAST multi-purpose maintenance deployer (EMMD) system, being collaboratively developed by ASIPP and CEA-IRFM, is built as upgrades for EAMA. Updated kinematics parameters such as DOF distribution and joint angle for EMMD robot are performed and verified in a simulation platform. A new modular joint has been developed to optimize the yaw joint actuator for easy assembly and flexibility reduction. A 3-DOF gripper with cameras and torque sensor has been designed to provide inspection and dexterous handling of small fragments inside the EAST chamber. A conceptual upgrade for EAMA-CASK has been developed for the purpose of protecting the end-effector's sensors which do not have temperature-resistant qualification. The high temperature and vacuum compatible solutions and validation experiments have been presented in this paper.

  20. Conceptual design of CFETR electron cyclotron wave system

    Tang, Yunying, E-mail: yytang@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, Hefei 230031, Anhui (China); University of Science and Technology of China, Jinzhai Road 96, Hefei 230026, Anhui (China); Wang, Xiaojie; Liu, Fukun; Zhang, Liyuan; Wei, Wei; Xu, Handong; Xu, Weiye; Wu, Dajun; Feng, Jianqiang [Institute of Plasma Physics, Chinese Academy of Sciences, Shushanhu Road 350, Hefei 230031, Anhui (China)

    2015-05-15

    Highlights: • The conceptual design of 170 GHz/20 MW electron cyclotron wave system was introduced. • The layout of RF sources was given. • The design and layout of transmission lines were shown and series of microwave components were introduced. • The structure of launcher was described in detail. • By the optic calculation and optimization of RF propagation inside the launcher, the quasi-optical parameters for launcher design were given. And then temperature distribution and thermal-stress of the injection mirror were analyzed. - Abstract: China Fusion Engineering Test Reactor (CFETR) is a test tokamak which is built for magnetically confined fusion plasma experiments. The electron cyclotron (EC) wave system of CFETR is designed to inject 20 MW RF power into the plasma for heating and current drive (H&CD) applications. The EC wave system consists of RF sources, twenty transmission lines (TLs) and one equatorial launcher. RF sources contain twenty gyrotrons with the output power 1 MW. There are series of microwave components distributed along the TL and the percentage of power losses of each TL is about 8.7%. In the equatorial launcher, five RF beams are injected into one focusing mirror and then reflected to the plasma via one injection mirror. The focusing mirror is spherical to focus Gaussian beam and the injection mirror which is flat can steer in the toroidal direction. After optic calculation and optimization, all the quasi-optical parameters for launcher design are given. Combining with the thermal stress analysis, the chosen inner diameter of water channel of injection mirror is 12 mm and the suggested water velocity is 3 m/s.

  1. Conceptual design of an emergency tritium clean-up system

    Muller, M.E.

    1978-01-01

    The Los Alamos Scientific Laboratory (LASL) has been selected to design, build, and operate a facility to demonstrate the operability of the tritium-related subsystems that would be required to successfully develop fusion reactor systems. Basically, these subsystems would consist of the deuterium-tritium fuel cycle and associated environmental control systems. An emergency tritium clean-up subsystem (ETC) for this facility will be designed to remove tritium from the cell atmosphere if an accident causes the primary and secondary tritium containment to be breached. Conceptually, the ETC will process cell air at the rate of 0.65 actual m 3 /s (1385 ACFM) and will achieve an overall decontamination factor of 10 6 for tritium oxide (T 2 O). Following the maximum credible release of 100 g of tritium, the ETC will restore the cell to operational status within 24 h without a significant release of tritium to the environment. The basic process will include compression of the air to 0.35 MPa (3.5 atm) in a reciprocating compressor followed by oxidation of the tritium to T 2 O in a catalytic reactor. The air will be cooled to 275 K (350 0 F) to remove most of the moisture, including T 2 O, as a condensate. The remaining moisture will be removed by molecular sieve dryer beds that incorporate a water-swamping step between beds, allowing greater T 2 O removal. A portion of the detritiated air will be recirculated to the cell; the remainder will be exhausted to the building ventilation stack to maintain a slight negative pressure in the cell. The ETC will be designed for maximum flexibility so that studies can be performed that involve various aspects of room air detritiation

  2. Design study of advanced nuclear fuel recycle system. Conceptual study of recycle system using molten salt

    Kakehi, I.; Shirai, N.; Hatano, M.; Kajitani, M.; Yonezawa, S.; Kawai, T.; Kawamura, F.; Tobe, K.; Takahashi, K.

    1996-12-01

    For the purpose of developing the future nuclear fuel recycle system, the design study of the advanced nuclear fuel recycle system is being conducted. This report describes intermediate accomplishments in the conceptual system study of the advanced nuclear fuel recycle system. Fundamental concepts of this system is the recycle system using molten salt which intend to break through the conventional concepts of purex and pellet fuel system. Contents of studies in this period are as follows, 1)feasibility study of the process by Cd-cathode for nitride fuel, 2)application study for the molten salt of low melting point (AlCl3+organic salt), 3)research for decladding (advantage of decladding by heat treatment), 4)behavior of FPs in electrorefining (behavior of iodine and volatile FP chlorides, FPs behavior in chlorination), 5)criticality analysis in electrorefiner, 6)drawing of off-gas flow diagram, 7)drawing of process machinery concept (cathode processor, vibration packing), 8)evaluation for the amounts of the high level radioactive wastes, 9)quality of the recycle fuels (FPs contamination of recycle fuel), 10)conceptual study of in-cell handling system, 11)meaning of the advanced nuclear fuel recycle system. The conceptual system study will be completed in describing concepts of the system and discussing issues for the developments. (author)

  3. Study on conceptual design system of tritium production fusion reactor

    He Kaihui

    2004-11-01

    Conceptual design of an advanced tritium production reactor based on spherical torus, which is intermediate application of fusion energy, was presented. Different from traditional tokamak tritium production reactor design, advanced plasma physics performance and compact structural characteristics of ST were used to minimize tritium leakage and to maximize tritium breeding ratio with arrangement of tritium production blankets as possible as it can within vacuum vessel in order to produce 1 kg excess tritium except self-sufficient plasma core, corresponding plant availability 40% or more. Based on 2D neutronics calculation, preliminary conceptual design of ST-TPR was presented. Besides systematical analyses; design risk, uncertainty and backup are introduced generally for the backgrounds of next detailed conceptual design. (author)

  4. Spatiotemporal conceptual platform for querying archaeological information systems

    Partsinevelos, Panagiotis; Sartzetaki, Mary; Sarris, Apostolos

    2015-04-01

    Spatial and temporal distribution of archaeological sites has been shown to associate with several attributes including marine, water, mineral and food resources, climate conditions, geomorphological features, etc. In this study, archeological settlement attributes are evaluated under various associations in order to provide a specialized query platform in a geographic information system (GIS). Towards this end, a spatial database is designed to include a series of archaeological findings for a secluded geographic area of Crete in Greece. The key categories of the geodatabase include the archaeological type (palace, burial site, village, etc.), temporal information of the habitation/usage period (pre Minoan, Minoan, Byzantine, etc.), and the extracted geographical attributes of the sites (distance to sea, altitude, resources, etc.). Most of the related spatial attributes are extracted with readily available GIS tools. Additionally, a series of conceptual data attributes are estimated, including: Temporal relation of an era to a future one in terms of alteration of the archaeological type, topologic relations of various types and attributes, spatial proximity relations between various types. These complex spatiotemporal relational measures reveal new attributes towards better understanding of site selection for prehistoric and/or historic cultures, yet their potential combinations can become numerous. Therefore, after the quantification of the above mentioned attributes, they are classified as of their importance for archaeological site location modeling. Under this new classification scheme, the user may select a geographic area of interest and extract only the important attributes for a specific archaeological type. These extracted attributes may then be queried against the entire spatial database and provide a location map of possible new archaeological sites. This novel type of querying is robust since the user does not have to type a standard SQL query but

  5. Conceptual frameworks of the notification, registration and licensing system applied in Cuba

    Jerez Verqueria, Pablo; Quevedo Garcia, Jose R.; Betancourt Hernadez, Luisa A.

    1996-01-01

    In our country, a safety regulations has been established whose objective is to establish the authorization system to apply and the requirements to fulfill by the license applications. The present work describes how such system has been conceptually conceived

  6. Benefits of using a Social-Ecological Systems Approach to Conceptualize and Model Wetlands Restoration

    Using a social-ecological systems (SES) perspective to examine wetland restoration helps decision-makers recognize interdependencies and relations between ecological and social components of coupled systems. Conceptual models are an invaluable tool to capture, visualize, and orga...

  7. Conceptual and numerical modeling approach of the Guarani Aquifer System

    L. Rodríguez

    2013-01-01

    Full Text Available In large aquifers, relevant for their considerable size, regional groundwater modeling remains challenging given geologic complexity and data scarcity in space and time. Yet, it may be conjectured that regional scale groundwater flow models can help in understanding the flow system functioning and the relative magnitude of water budget components, which are important for aquifer management. The Guaraní Aquifer System is the largest transboundary aquifer in South America. It contains an enormous volume of water; however, it is not well known, being difficult to assess the impact of exploitation currently used to supply over 25 million inhabitants. This is a sensitive issue because the aquifer is shared by four countries. Moreover, an integrated groundwater model, and therefore a global water balance, were not available. In this work, a transient regional scale model for the entire aquifer based upon five simplified, equally plausible conceptual models represented by different hydraulic conductivity parametrizations is used to analyze the flow system and water balance components. Combining an increasing number of hydraulic conductivity zones and an appropriate set of boundary conditions, the hypothesis of a continuous sedimentary unit yielded errors within the calibration target in a regional sense. The magnitude of the water budget terms resulted very similar for all parametrizations. Recharge and stream/aquifer fluxes were the dominant components representing, on average, 84.2% of total inflows and 61.4% of total outflows, respectively. However, leakage was small compared to stream discharges of main rivers. For instance, the simulated average leakage for the Uruguay River was 8 m3 s−1 while the observed absolute minimum discharge was 382 m3 s−1. Streams located in heavily pumped regions switched from a gaining condition in early years to a losing condition over time. Water is discharged through

  8. Conceptual and numerical modeling approach of the Guarani Aquifer System

    Rodríguez, L.; Vives, L.; Gomez, A.

    2013-01-01

    In large aquifers, relevant for their considerable size, regional groundwater modeling remains challenging given geologic complexity and data scarcity in space and time. Yet, it may be conjectured that regional scale groundwater flow models can help in understanding the flow system functioning and the relative magnitude of water budget components, which are important for aquifer management. The Guaraní Aquifer System is the largest transboundary aquifer in South America. It contains an enormous volume of water; however, it is not well known, being difficult to assess the impact of exploitation currently used to supply over 25 million inhabitants. This is a sensitive issue because the aquifer is shared by four countries. Moreover, an integrated groundwater model, and therefore a global water balance, were not available. In this work, a transient regional scale model for the entire aquifer based upon five simplified, equally plausible conceptual models represented by different hydraulic conductivity parametrizations is used to analyze the flow system and water balance components. Combining an increasing number of hydraulic conductivity zones and an appropriate set of boundary conditions, the hypothesis of a continuous sedimentary unit yielded errors within the calibration target in a regional sense. The magnitude of the water budget terms resulted very similar for all parametrizations. Recharge and stream/aquifer fluxes were the dominant components representing, on average, 84.2% of total inflows and 61.4% of total outflows, respectively. However, leakage was small compared to stream discharges of main rivers. For instance, the simulated average leakage for the Uruguay River was 8 m3 s-1 while the observed absolute minimum discharge was 382 m3 s-1. Streams located in heavily pumped regions switched from a gaining condition in early years to a losing condition over time. Water is discharged through the aquifer boundaries, except at the eastern boundary. On average

  9. Buddhism-as-a-meaning-system for coping with late-life stress: a conceptual framework.

    Xu, Jianbin

    2018-01-01

    Religion is increasingly conceptualized as a meaning system for adjustment and coping. Most of the conceptualizations are grounded in the Judeo-Christian tradition. They may thus not be applicable to Buddhism, which provides a distinct tenor of meaning for coping. This article seeks to construct a conceptual framework of Buddhism-as-a-meaning-system for coping with late-life stress. Literature review and conceptualization were employed. Under this framework, Buddhism functions as a meaning system involving existential meaning, cognitive meaning, and behavioral meaning. There is reason to believe that this framework promises to offer a holistic conceptual map of Buddhist coping in late life. Thus, it could serve as a guide for further empirical and theoretical exploration in the uncharted terrains of Buddhist coping in old age. In addition, gerontological practitioners could use this framework as a frame of reference when working with elderly Buddhist clients who are in stressful circumstances.

  10. Biomarkers in early phase development of central nervous system drugs : a conceptual framework

    Post, Jeroen-Paul van der

    2006-01-01

    The main objective of this thesis is to provide a conceptual framework for the use of Central Nervous System (CNS) biomarkers in early phase clinical drug development. In the Introduction the current use of biomarkers in early CNS drug development is discussed. A conceptual framework for the

  11. Conceptual design and systems analysis of photovoltaic power systems. Volume III(1). Technology

    Pittman, P.F.

    1977-05-01

    Conceptual designs were made and analyses were performed on three types of solar photovoltaic power systems. Included were Residential (1 to 10 kW), Intermediate (0.1 to 10 MW), and Central (50 to 1000 MW) Power Systems to be installed in the 1985 to 2000 time period. Subsystem technology presented here includes: insolation, concentration, silicon solar cell modules, CdS solar cell module, array structure, battery energy storage, power conditioning, residential power system architectural designs, intermediate power system structural design, and central power system facilities and site survey.

  12. Conceptual design of the integral test loop (I): Reactor coolant system and secondary system

    Song, Chul Hwa; Lee, Seong Je; Kwon, Tae Soon; Moon, Sang Ki [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-10-01

    This report describes the conceptual design of the primary coolant system and the secondary system of the Integral Test Loop (ITL) which simulates overall thermal hydraulic phenomena of the primary system of a nuclear power plant during postulated accidents or transients. The design basis for the primary coolant system and secondary system is as follows ; Reference plant: Korean Standard Nuclear Plant (KSNP), Height ratio : 1/1, Volume ratio : 1/200, Power scale : Max. 15% of the scaled nominal power, Temperature, Pressure : Real plant conditions. The primary coolant system includes a reactor vessel, which contains a core simulator, a steam generator, a reactor coolant pump simulator, a pressurizer and piping, which consists of two hot legs, four cold legs and four intermediate legs. The secondary system consists of s steam discharge system, a feedwater supply system and a steam condensing system. This conceptual design report describes general configuration of the reference plant, and major function and operation of each system of the plant. Also described is the design philosophy of each component and system of the ITL, and specified are the design criteria and technical specifications of each component and system of the ITL in the report. 17 refs., 43 figs., 51 tabs. (Author)

  13. Conceptual design of control rod regulating system for plate type fuels of Triga-2000 reactor

    Eko Priyono; Saminto

    2016-01-01

    Conceptual design of the control rod regulating system for plate type fuel of TRIGA-2000 reactor has been made. Conceptual design of the control rod regulating system for plate type fuel of TRIGA-2000 reactor was made with refer to study result of instrument and control system which is used in BATAN'S reactor. Conceptual design of the control rod regulating system for plate type fuel of TRIGA-2000 reactor consist of 4 segments that is control panel, translator, driver and display. Control panel is used for regulating, safety and display control rod, translator is used for signal processing from control panel, driver is used for driving control rod and display is used for display control rod level position. The translator was designed in 2 modes operation i.e operation by using PLC modules and IC TTL modules. These conceptual design can be used as one of reference of control rod regulating system detail design. (author)

  14. Supporting conceptual modelling of dynamic systems: A knowledge engineering perspective on qualitative reasoning

    Liem, J.

    2013-01-01

    Research has shown that even students educated in science at prestigious universities have misconceptions about the systems underlying climate change, sustainability and government spending. Interactive conceptual modelling and simulation tools, which are based on Artificial Intelligence techniques,

  15. Social Support System in Learning Network for lifelong learners: A Conceptual framework

    Nadeem, Danish; Stoyanov, Slavi; Koper, Rob

    2009-01-01

    Nadeem, D., Stoyanov, S., & Koper, R. (2009). Social support system in learning network for lifelong learners: A Conceptual framework [Special issue]. International Journal of Continuing Engineering Education and Life-Long Learning, 19(4/5/6), 337-351.

  16. Development of a conceptual framework toward an integrated transportation system : final report, April 10, 2009.

    2009-04-10

    This report documents research on the conceptual framework of an integrated transportation system with a prototype application under the framework. Three levels of control are involved in this framework: at the global level (an entire transportation ...

  17. A conceptual framework to model long-run qualitative change in the energy system

    Ebersberger, Bernd

    2004-01-01

    A conceptual framework to model long-run qualitative change in the energy system / A. Pyka, B. Ebersberger, H. Hanusch. - In: Evolution and economic complexity / ed. J. Stanley Metcalfe ... - Cheltenham [u.a.] : Elgar, 2004. - S. 191-213

  18. Conceptualizing Stakeholders' Perceptions of Ecosystem Services: A Participatory Systems Mapping Approach

    Lopes, Rita; Videira, Nuno

    2015-12-01

    A participatory system dynamics modelling approach is advanced to support conceptualization of feedback processes underlying ecosystem services and to foster a shared understanding of leverage intervention points. The process includes systems mapping workshop and follow-up tasks aiming at the collaborative construction of causal loop diagrams. A case study developed in a natural area in Portugal illustrates how a stakeholder group was actively engaged in the development of a conceptual model depicting policies for sustaining the climate regulation ecosystem service.

  19. Conceptual design of superconducting magnet systems for the Argonne Tokamak Experimental Power Reactor

    Wang, S.T.; Turner, L.R.; Mills, F.E.; DeMichele, D.W.; Smelser, P.; Kim, S.H.

    1976-01-01

    As an integral effort in the Argonne Tokamak Experimental Power Reactor Conceptual Design, the conceptual design of a 10-tesla, pure-tension superconducting toroidal-field (TF) coil system has been developed in sufficient detail to define a realistic design for the TF coil system that could be built based upon the current state of technology with minimum technological extrapolations. A conceptual design study on the superconducting ohmic-heating (OH) coils and the superconducting equilibrium-field (EF) coils were also completed. These conceptual designs are developed in sufficient detail with clear information on high current ac conductor design, cooling, venting provision, coil structural support and zero loss poloidal coil cryostat design. Also investigated is the EF penetration into the blanket and shield

  20. Conceptual Design on the System Architecture of Intellectual Export Control System(IXCS)

    Jeong, Seung Ho; Yang, Seung Hyo; Tae, Jae Woong; Shin, Dong Hoon

    2013-01-01

    The commodity classification is for identifying strategic commodity, and the export license is for verifying that exports have met the requirement by the national legislation following international obligations (i. e. NSG guidelines) Since 2008, the 'Nuclear Export Promotion Service (NEPS)' System has been used as a total IT system providing various functions for exporters and reviewers. However, reviewers who make the decisions for commodity classification and export license, may have difficulties caused by ambiguity of criteria. For example, it is not sure whether a CVCS (Chemical Volume Control System) of a certain nuclear reactor plant belongs to strategic commodity or not. The NEPS is a useful system helping users save their time, but it cannot provide solutions reducing ambiguity of each classification or license case. To solve these problems and provide more efficient ways to their decisions, various intelligent IT solutions are searched and studied. A functional architecture of IXCS is defined and designed conceptually. This conceptual design will be utilized to make database specification and to find the optimized artificial algorithm for review processes

  1. Conceptual design of centralized control system for LHD

    Kaneko, H.; Yamazaki, K.; Taniguchi, Y.

    1992-01-01

    A centralized control system for a fusion experimental machine is discussed. A configuration whereby a number of complete and uniform local systems are controlled by a central computer, a timer and an interlock system is appropriate for the control system of the Large Helical Device (LHD). A connection among local systems can be made by Ethernet, because a faster transmission of control data is processed by a specific system. (author)

  2. The Taskforce on Conceptual Foundations of Earth System Governance: Sustainability Science

    Barry Ness

    2017-02-01

    Full Text Available We are pleased to introduce the second special issue from Challenges in Sustainability, this time as a part of the Taskforce on Conceptual Foundations of Earth System Governance, an initiative by the Earth System Governance Project (ESG (http://www.earthsystemgovernance.net/conceptual-foundations/. The ESG Project is a global research alliance. It is the largest social science research network in the field of governance and global environmental change. ESG is primarily a scientific effort but is also designed to assist policy responses to pressing problems of earth system transformation.

  3. Adaptive Systems in Education: A Review and Conceptual Unification

    Wilson, Chunyu; Scott, Bernard

    2017-01-01

    Purpose: The purpose of this paper is to review the use of adaptive systems in education. It is intended to be a useful introduction for the non-specialist reader. Design/methodology/approach: A distinction is made between intelligent tutoring systems (ITSs) and adaptive hypermedia systems (AHSs). The two kinds of system are defined, compared and…

  4. Monitored Retrievable Storage conceptual system study: metal storage casks

    Unterzuber, R.; Cross, T.E.; Krasicki, B.R.

    1983-08-01

    A description of the metal cask storage facility concept is presented with the operations required to handle the spent fuel or high-level wastes and transuranic wastes. A generic Receiving and Handling Facility, provided by PNL, has been used for this study. Modifications to the storage delivery side of the handling facility, necessary to couple the Receiving and Handling Facility with the storage facility, are described. The equipment and support facilities needed for the storage facility are also described. Two separate storage facilities are presented herein: one for all spent fuel storage, and one for storage of high-level waste (HLW) and transuranic waste (TRU). Each facility is described for the capacities and rates defined by PNL in the Concept Technical Performance Criteria and Base Assumptions (see Table 1.3-1). Estimates of costs and time-distributions of expenditures have been developed to construct, operate, and decommission the conceptual MRS facilities in mid-1983 dollars, for the base cases given using the cost categories and percentages provided by PNL. Cost estimates and time-distributions of expenditures have also been developed to expand the facility throughput rate from 1800 MTU to 3000 MTU, and to expand the facility storage capacity from 15,000 MTU to 72,00 MTU. The life cycle cost of the facility for the bounding cases of all spent fuel and all HLW and TRU, using the time-distributions of costs developed above and assuming a two percent per year discount rate, are also presented. 3 references, 16 figures, 18 tables

  5. Conceptual systems and teacher attitudes toward regular classroom placement of mildly mentally retarded students.

    Feldman, D; Altman, R

    1985-01-01

    The effects of a teacher personality construct (abstract vs. concrete conceptual system) and two pupil variables (race, school behavior) on 454 regular classroom teachers' attitudes toward mainstreaming were determined. Following administration of the Conceptual Systems Test, teachers were randomly assigned a profile of a mildly mentally retarded student that held pupil IQ and school achievement constant while varying pupil's race and school behavior. Subjects responded on an integration inventory comprised of three subscales: social-psychological classroom environment, self-actualization, and classroom cohesiveness. Results revealed a significant main effect on the behavior variable and a significant Personality X Race interaction on all inventory dimensions, suggesting that these teachers perceived maladaptive behavior of mainstreamed retarded students as a significant threat to a conducive instructional atmosphere and the capability of nonretarded students to achieve to their potential. These results have implications for inservice training for teachers based on the pupil race and teacher conceptual system findings.

  6. Conceptual definition of Automated Power Systems Management. [for planetary spacecraft

    Imamura, M. S.; Skelly, L.; Weiner, H.

    1977-01-01

    Automated Power Systems Management (APSM) is defined as the capability of a spacecraft power system to automatically perform monitoring, computational, command, and control functions without ground intervention. Power systems for future planetary spacecraft must have this capability because they must perform up to 10 years, and accommodate real-time changes in mission execution autonomously. Specific APSM functions include fault detection, isolation, and correction; system performance and load profile prediction; power system optimization; system checkout; and data storage and transmission control. This paper describes the basic method of implementing these specific functions. The APSM hardware includes a central power system computer and a processor dedicated to each major power system subassembly along with digital interface circuitry. The major payoffs anticipated are in enhancement of spacecraft reliability and life and reduction of overall spacecraft program cost.

  7. Diagnosing inventory management systems : An empirical evaluation of a conceptual approach

    de Vries, Jan

    Although many studies have addressed the diagnosing of inventory systems, the field of operations management still seems to lack a systemised and integrated approach towards analysing inventory management systems. In this article, a contribution is made to fill this gap by proposing a conceptual

  8. Conceptual model of management steadfast economic development production-economic systems

    Prokhorova, V.

    2010-01-01

    The article is devoted developments of conceptual model of management proof economic development of the industrialeconomy systems. Features are certain, the algorithm of impulse is offered and intercommunication of contours of management proof economic development of the industrialeconomy systems is investigational

  9. Towards Systems that Care: A Conceptual Framework Based on Motivation, Metacognition and Affect

    du Boulay, Benedict; Avramides, Katerina; Luckin, Rosemary; Martinez-Miron, Erika; Rebolledo-Mendez, Genaro; Carr, Amanda

    2010-01-01

    This paper describes a Conceptual Framework underpinning "Systems that Care" in terms of educational systems that take account of motivation, metacognition and affect, in addition to cognition. The main focus is on "motivation," as learning requires the student to put in effort and be engaged, in other words to be motivated to learn. But…

  10. Conceptual design of HL-2M tokamak control system

    Xia Fan; Chen Liaoyuan; Song Xianming; Zhang Jinhua; Lou Cuiwen; Pan Yudong

    2009-01-01

    The static architecture, dynamic behavior, control theory and simulation of HL-2M tokamak control system are described. The real-time network will be build for the communication of real-time control among its subsystems and universal timing system will be build to guarantee the synchronization among the subsystems. The duty to achieve preprogrammed parameters is carried out by plasma discharge control. In order to reduce the damage made by discharge exception, the error-handing mechanism of supervision system is considered. The controllers of magnetic control system are designed to control the current, shape and position of plasma and simulation system is designed for testing the controllers. (authors)

  11. Conceptual study on HTGR-IS hydrogen supply system using organic hydrides

    Terada, Atsuhiko; Noguchi, Hiroki; Takegami, Hiroaki; Kamiji, Yu; Inagaki, Yoshiyuki

    2012-02-01

    We have proposed a hydrogen supply-chain system, which is a storage/supply system of large amount of hydrogen produced by HTGR-IS hydrogen production system. The organic chemical hydride method is one of the candidate techniques in the system for hydrogen storage and transportation. In this study, properties of organic hydrides and conventional hydrogen storage/supply system were surveyed to make use of the conceptual design of the hydrogen supply system using an organic hydrides method with VHTR-IS hydrogen production process (hydrogen production: 85,400 Nm 3 /h). Conceptual specifications of the main equipments were designed for the hydrogen supply system consisting of hydrogenation and dehydrogenation process. It was also clarified the problems of hydrogen supply system, such as energy efficiency and system optimization. (author)

  12. Cost and performance analysis of conceptual designs of physical protection systems

    Hicks, M.J.; Snell, M.S.; Sandoval, J.S.; Potter, C.S.

    1998-01-01

    CPA -- Cost and Performance Analysis -- is a methodology that joins Activity Based Cost (ABC) estimation with performance based analysis of physical protection systems. CPA offers system managers an approach that supports both tactical decision making and strategic planning. Current exploratory applications of the CPA methodology are addressing analysis of alternative conceptual designs. To support these activities, the original architecture for CPA, is being expanded to incorporate results from a suite of performance and consequence analysis tools such as JTS (Joint Tactical Simulation), ERAD (Explosive Release Atmospheric Dispersion) and blast effect models. The process flow for applying CPA to the development and analysis conceptual designs is illustrated graphically

  13. Conceptualizing Stakeholders’ Perceptions of Ecosystem Services: A Participatory Systems Mapping Approach

    Lopes Rita

    2015-12-01

    Full Text Available A participatory system dynamics modelling approach is advanced to support conceptualization of feedback processes underlying ecosystem services and to foster a shared understanding of leverage intervention points. The process includes systems mapping workshop and follow-up tasks aiming at the collaborative construction of causal loop diagrams. A case study developed in a natural area in Portugal illustrates how a stakeholder group was actively engaged in the development of a conceptual model depicting policies for sustaining the climate regulation ecosystem service.

  14. A conceptual design for the TRIUMF KAON factory control system

    Dawson, W.K.; Dobinson, R.W.; Gurd, D.P.; Serre, C.

    1987-12-01

    This report is intended to give accelerator builders an idea of what may be realistically expected of the control system, equipment specialists an idea of how their equipment could be integrated into the accelerator complex, control system people an idea of the type of system they will be expected to provide and, finally, to give those who provide the funds a better idea of the costs and effort required

  15. Conceptualization of Enterprise Systems Education Using an Experiential Learning Framework

    Fathelrahman, Adil; Kabbar, Eltahir

    2018-01-01

    The use of enterprise systems to facilitate cross-functional integration within an organization's functional areas is becoming increasingly important. Business schools around the globe have realized the importance of using enterprise systems to facilitate the teaching of business processes and business processes transformation. The authors adopt…

  16. Conceptual Design of a Floating Support Structure and Mooring System for a Vertical Axis Wind Turbine

    Berthelsen, Petter Andreas; Fylling, Ivar; Vita, Luca

    2012-01-01

    This paper deals with the conceptual design of a floating support structure and mooring system for a 5MW vertical axis offshore wind turbine. The work is carried out as part of the DeepWind project, where the main objective is to investigate the feasibility of a floating vertical axis offshore wind...... turbine. The DeepWind concept consists of a Darrieus rotor mounted on a spar buoy support structure. The conceptual design is carried out in an iterative process, involving the different subcomponents. The present work is part of the first design iteration and the objective is to find a feasible floating...... support structure and mooring system for the DeepWind concept. The conceptual design is formulated as an optimization problem: Starting with an initial configuration, the optimization procedure tries to find a cheaper solution while satisfying a set of design requirements. This approach utilizes available...

  17. Conceptual design of planetary gearbox system for constant generator speed in hydro power plant

    Bhargav

    2018-01-01

    Full Text Available Micro Hydro Power Plant (MHPP is emerging as one of the most clean, renewable and reliable energy technology for harnessing power. In MHPP hydro governors are avoided, that results in turbine speed fluctuation. MHPP requires either speed or torque amplification of generator for constant power generation. To achieve this, planetary gear transmission system is explored for MHPP due to its higher efficiency and compact size. A conceptual planetary gearbox system is developed for MHPP to maintain constant generator speed. The conceptual gearbox is designed, modelled and analysed using ADAMS software. Simulation results are found to be in close agreement with analytical results. Hence, conceptual design of planetary gearbox can be used to govern constant generator speed. In this paper, a MHPP which generate constant power of 5 kW at constant generator speed of 1490 rpm is analysed and validated

  18. Conceptual requirements for large fusion experiment control, data, robotics, and management systems

    Gaudreau, M.P.J.; Sullivan, J.D.

    1987-05-01

    The conceptual system requirements for the control, data, robotics, and project management (CDRM) system for the next generation of fusion experiments are developed by drawing on the success of the Tara control and data system. The requirements are described in terms of an integrated but separable matrix of well-defined interfaces among the various systems and subsystems. The study stresses modularity, performance, cost effectiveness, and exportability

  19. Research on conceptual design of simplified nuclear safety instrument and control system

    Huang Jie

    2015-01-01

    The Nuclear safety instrument and control system is directly related to the safety of the reactor. So redundant and diversity design is used to ensure the system's security and reliability. This make the traditional safety system large, more cabinets and wiring complexity. To solve these problem, we can adopt new technology to make the design more simple. The simplify conceptual design can make the system less cabinets, less wiring, but high security, strong reliability. (author)

  20. Conceptual study of superconducting urban area power systems

    Noe, Mathias; Gold-acker, Wilfried; Bach, Robert; Prusseit, Werner; Willen, Dag; Poelchau, Juri; Linke, Christian

    2010-01-01

    Efficient transmission, distribution and usage of electricity are fundamental requirements for providing citizens, societies and economies with essential energy resources. It will be a major future challenge to integrate more sustainable generation resources, to meet growing electricity demand and to renew electricity networks. Research and development on superconducting equipment and components have an important role to play in addressing these challenges. Up to now, most studies on superconducting applications in power systems have been concentrated on the application of specific devices like for example cables and current limiters. In contrast to this, the main focus of our study is to show the consequence of a large scale integration of superconducting power equipment in distribution level urban power systems. Specific objectives are to summarize the state-of-the-art of superconducting power equipment including cooling systems and to compare the superconducting power system with respect to energy and economic efficiency with conventional solutions. Several scenarios were considered starting from the replacement of an existing distribution level sub-grid up to a full superconducting urban area distribution level power system. One major result is that a full superconducting urban area distribution level power system could be cost competitive with existing solutions in the future. In addition to that, superconducting power systems offer higher energy efficiency as well as a number of technical advantages like lower voltage drops and improved stability.

  1. Irrational reactions to negative outcomes: evidence for two conceptual systems.

    Epstein, S; Lipson, A; Holstein, C; Huh, E

    1992-02-01

    According to cognitive-experiential self-theory (CEST), individuals have 2 systems for processing information, a rational system and an experiential system. Research conducted under norm theory (NT) has provided impressive evidence of an if only (IO) effect associated with postoutcome processing of aversive events that are highly consistent with formulations in CEST. Two studies involving vignettes adapted from NT were conducted that tested 4 hypotheses and corollaries derived from CEST. It was demonstrated, in support of hypotheses, that the IO effect can be obtained with ratings of one's own and of a protagonist's specific behaviors, as well as with ratings of a protagonist's diffuse emotions (the usual procedure); that a rational orientation decreases the IO effect; that increasing the intensity of outcomes increases it; and that priming the experiential system reduces people's ability to subsequently think rationally. The theoretical and research implications of these findings are discussed.

  2. Accelerator driven radiation clean nuclear power system conceptual research symposium

    Zhao Zhixiang

    2000-06-01

    The R and D of ADS (Accelerators Driven Subcritical System) in China introduced. 31 theses are presented. It includes the basic principle of ADS, accelerators, sub-critical reactors, neutron physics, nuclear data, partitioning and transmutation

  3. Conceptualizing the Organizational Role of Technical Communicators: A Systems Approach.

    Harrison, Teresa M.; Debs, Mary Beth

    1988-01-01

    Uses a systems approach to organizational theory to argue that technical communicators function as "boundary spanners," who make sense of and disseminate information required for coordination between organizational groups, and for effective responses to the environment. (JAD)

  4. Complex multidisciplinary system composition for aerospace vehicle conceptual design

    Gonzalez, Lex

    Although, there exists a vast amount of work concerning the analysis, design, integration of aerospace vehicle systems, there is no standard for how this data and knowledge should be combined in order to create a synthesis system. Each institution creating a synthesis system has in house vehicle and hardware components they are attempting to model and proprietary methods with which to model them. This leads to the fact that synthesis systems begin as one-off creations meant to answer a specific problem. As the scope of the synthesis system grows to encompass more and more problems, so does its size and complexity; in order for a single synthesis system to answer multiple questions the number of methods and method interface must increase. As a means to curtail the requirement that the increase of an aircraft synthesis systems capability leads to an increase in its size and complexity, this research effort focuses on the idea that each problem in aerospace requires its own analysis framework. By focusing on the creation of a methodology which centers on the matching of an analysis framework towards the problem being solved, the complexity of the analysis framework is decoupled from the complexity of the system that creates it. The derived methodology allows for the composition of complex multi-disciplinary systems (CMDS) through the automatic creation and implementation of system and disciplinary method interfaces. The CMDS Composition process follows a four step methodology meant to take a problem definition and progress towards the creation of an analysis framework meant to answer said problem. The unique implementation of the CMDS Composition process take user selected disciplinary analysis methods and automatically integrates them, together in order to create a syntactically composable analysis framework. As a means of assessing the validity of the CMDS Composition process a prototype system (AVDDBMS) has been developed. AVD DBMS has been used to model the

  5. A conceptual design of Final Focus Systems for linear colliders

    Brown, K.L.

    1987-06-01

    Linear colliders are a relatively recent development in the evolution of particle accelerators. This report discusses some of the approaches that have been considered for the design of Final Focus Systems to demagnify the beam exiting from a linac to the small size suitable for collisions at the interaction point. The system receiving the most attention is the one adopted for the SLAC Linear Collider. However, the theory and optical techniques discussed should be applicable to the design efforts for future machines

  6. Conceptual Model of Business Value of Business Intelligence Systems

    Popovič, Aleš; Turk, Tomaž; Jaklič, Jurij

    2010-01-01

    With advances in the business intelligence area, there is an increasing interest for the introduction of business intelligence systems into organizations. Although the opinion about business intelligence and its creation of business value is generally accepted, economic justification of investments into business intelligence systems is not always clear. Measuring the business value of business intelligence in practice is often not carried out due to the lack of measurement methods and resourc...

  7. Conceptual design of Remote Control System for EAST tokamak

    Sun, X.Y.; Wang, F.; Wang, Y.; Li, S.

    2014-01-01

    Highlights: • A new design conception for remote control for EAST tokamak is proposed. • Rich Internet application (RIA) was selected to implement the user interface. • Some security mechanism was used to fulfill security requirement. - Abstract: The international collaboration becomes popular in tokamak research like in many other fields of science, because the experiment facilities become larger and more expensive. The traditional On-site collaboration Model that has to spend much money and time on international travel is not fit for the more frequent international collaboration. The Remote Control System (RCS), as an extension of the Central Control System for the EAST tokamak, is designed to provide an efficient and economical way to international collaboration. As a remote user interface, the RCS must integrate with the Central Control System for EAST tokamak to perform discharge control function. This paper presents a design concept delineating a few key technical issues and addressing all significant details in the system architecture design. With the aim of satisfying system requirements, the RCS will select rich Internet application (RIA) as a user interface, Java as a back-end service and Secure Socket Layer Virtual Private Network (SSL VPN) for securable Internet communication

  8. Conceptual design of Remote Control System for EAST tokamak

    Sun, X.Y., E-mail: xysun@ipp.ac.cn; Wang, F.; Wang, Y.; Li, S.

    2014-05-15

    Highlights: • A new design conception for remote control for EAST tokamak is proposed. • Rich Internet application (RIA) was selected to implement the user interface. • Some security mechanism was used to fulfill security requirement. - Abstract: The international collaboration becomes popular in tokamak research like in many other fields of science, because the experiment facilities become larger and more expensive. The traditional On-site collaboration Model that has to spend much money and time on international travel is not fit for the more frequent international collaboration. The Remote Control System (RCS), as an extension of the Central Control System for the EAST tokamak, is designed to provide an efficient and economical way to international collaboration. As a remote user interface, the RCS must integrate with the Central Control System for EAST tokamak to perform discharge control function. This paper presents a design concept delineating a few key technical issues and addressing all significant details in the system architecture design. With the aim of satisfying system requirements, the RCS will select rich Internet application (RIA) as a user interface, Java as a back-end service and Secure Socket Layer Virtual Private Network (SSL VPN) for securable Internet communication.

  9. SOME CONCEPTUAL PROPERTIES FOR KNOWLEDGE MANAGEMENT SYSTEMS DESIGN

    Vasile MAZILESCU

    2005-01-01

    Full Text Available Knowledge Management Systems (KMS are important tools by which organizations can better useinformation and, more importantly, manage knowledge. Unlike other strategies, knowledge management (KM isdifficult to define because it encompasses a range of concepts, management tasks, technologies, and organizationalpractices, all of which come under the umbrella of the information management. Semantic approaches alloweasier and more efficient training, maintenance, and support knowledge. Current ICT markets are dominated byrelational databases and document-centric information technologies, procedural algorithmic programmingparadigms, and stack architecture. A key driver of global economic growth in the coming decade is the build-out ofbroadband telecommunications and the deployment of intelligent services bundling. This paper introduces themain characteristics of an Intelligent Knowledge Management System as a multi-agent system used in a LearningControl Problem (IKMSLCP. We describe an intelligent KM framework, allowing the observer (a human agentto learn from experience.

  10. Conceptual design of the virtual engineering system for high level radioactive waste geological disposal

    2000-02-01

    The role of Virtual Engineering System for High Level Radioactive Waste Geological Disposal (hereafter the VES) is to accumulate and unify the results of research and development which JNC had been carried out for the completion of the second progress report on a computer system. The purpose and functions of VES with considering the long-term plan for geological disposal in Japan was studied. The analysis between geological environment assessment, safety performance assessment, and engineering technology had not been integrated mutually in the conventional study. The iterative analysis performed by VES makes it possible to analyze natural barrier and engineering barrier more quantitatively for obtaining safety margin and rationalization of the design of a waste repository. We have examined the system functions to achieve the above purpose of VES. Next, conceptual design for codes, databases, and utilities that consist of VES were performed by examining their purpose and functions. The conceptual design of geological environment assessment system, safety performance assessment system, waste repository element database, economical assessment system, investigation support system, quality assurance system, and visualization system are preformed. The whole system configuration, examination of suitable configuration of hardware and software, examination of system implementation, the confirmation of parallel calculation technology, the conceptual design of platform, the development of demonstration program of platform are performed. Based upon studies stated above, the VES development plan including prototype development during the period of selection of the site candidate was studied. The concept of VES was build based on the examination stated above. (author)

  11. ADVANCED TURBINE SYSTEM CONCEPTUAL DESIGN AND PRODUCT DEVELOPMENT - Final Report

    Albrecht H. Mayer

    2000-07-15

    Asea Brown Boveri (ABB) has completed its technology based program. The results developed under Work Breakdown Structure (WBS) 8, concentrated on technology development and demonstration have been partially implemented in newer turbine designs. A significant improvement in heat rate and power output has been demonstrated. ABB will use the knowledge gained to further improve the efficiency of its Advanced Cycle System, which has been developed and introduced into the marked out side ABB's Advanced Turbine System (ATS) activities. The technology will lead to a power plant design that meets the ATS performance goals of over 60% plant efficiency, decreased electricity costs to consumers and lowest emissions.

  12. A System for Conceptual Pathway Finding and Deductive Querying

    Andreasen, Troels; Bulskov, Henrik; Nilsson, Jørgen Fischer

    2015-01-01

    We describe principles and design of a system for knowledge bases applying a natural logic. Natural logics are forms of logic which appear as stylized fragments of natural language sentences. Accordingly, such knowledge base sentences can be read and understood directly by a domain expert....... The system applies a graph form computed from the input natural logic sentences. The graph form generalizes the usual partial-order ontological sub-class structures by accommodation of affirmative sentences comprising recursive phrase structures. In this paper we focus on the logical inference rules...

  13. ADVANCED TURBINE SYSTEM CONCEPTUAL DESIGN AND PRODUCT DEVELOPMENT; FINAL

    Albrecht H. Mayer

    2000-01-01

    Asea Brown Boveri (ABB) has completed its technology based program. The results developed under Work Breakdown Structure (WBS) 8, concentrated on technology development and demonstration have been partially implemented in newer turbine designs. A significant improvement in heat rate and power output has been demonstrated. ABB will use the knowledge gained to further improve the efficiency of its Advanced Cycle System, which has been developed and introduced into the marked out side ABB's Advanced Turbine System (ATS) activities. The technology will lead to a power plant design that meets the ATS performance goals of over 60% plant efficiency, decreased electricity costs to consumers and lowest emissions

  14. Conceptual integrated approach for the magnet system of a tokamak reactor

    Duchateau, J.-L.; Hertout, P.; Saoutic, B.; Artaud, J.-F.; Zani, L.; Reux, C.

    2014-01-01

    Highlights: • We give a conceptual approach of a fusion reactor magnet system based on analytical formula. • We give design criteria for the CS and TF cable in conduit conductors and for the magnet system structural description. • We apply this conceptual approach to ITER and we crosscheck with actual characteristics. • We apply this conceptual approach to a possible version of DEMO. - Abstract: In the framework of the reflexion about DEMO, a conceptual integrated approach for the magnet system of a tokamak reactor is presented. This objective is reached using analytical formulas which are presented in this paper, coupled to a Fortran code ESCORT (Electromagnetic Superconducting System for the Computation of Research Tokamaks), to be integrated into SYCOMORE, a code for reactor modelling presently in development at CEA/IRFM in Cadarache, using the tools of the EFDA Integrated Tokamak Modelling task force. The analytical formulas deal with all aspects of the magnet system, starting from the derivation of the TF system general geometry, from the plasma main characteristics. The design criteria for the cable current density and the structural design of the toroidal field and central solenoid systems are presented, enabling to deliver the radial thicknesses of the magnets and enabling also to estimate the plasma duration of the plateau. As a matter of fact, a pulsed version DEMO is presently actively considered in the European programmes. Considerations regarding the cryogenics and the protection are given, affecting the general design. An application of the conceptual approach is presented, allowing a comparison between ESCORT output data and actual ITER parameters and giving the main characteristics of a possible version for DEMO

  15. Conceptual Features of Value Management of Socio-Economic Systems

    Serebryakova, Galina V.; Musayelyan, Igor K.

    2016-01-01

    The article highlights the need to establish and apply organizational and economic mechanisms that contribute to strengthening moral and ethical components in management. Emphasis is put on the issue of interactions within a company which lays a foundation for value management of socioeconomic systems. It is shown that present-day business…

  16. Associative conceptual space-based information retrieval systems

    M.J. Schuemie (Martijn); J.H. van den Berg (Jan)

    1998-01-01

    textabstractIn this `Information Era' with the availability of large collections of books, articles, journals, CD-ROMs, video films and so on, there exists an increasing need for intelligent information retrieval systems that enable users to find the information desired easily. Many attempts have

  17. Linking a Conceptual Framework on Systems Thinking with Experiential Knowledge

    Garavito-Bermúdez, Diana; Lundholm, Cecilia; Crona, Beatrice

    2016-01-01

    This paper addresses a systemic approach for the study of fishers' ecological knowledge in order to describe fishers' ways of knowing and dealing with complexity in ecosystems, and discusses how knowledge is generated through, e.g. apprenticeship, experiential knowledge, and testing of hypotheses. The description and analysis of fishers'…

  18. Conceptual design analyses for Hanford Site deployable remote spectroscopy systems

    Philipp, B.L.; Reich, F.R.

    1994-09-01

    This document identifies potential remote, NIR spectroscopic waste surface moisture monitoring system design alternatives to be operated inside one of the Hanford Site, high level, nuclear waste storage tanks. Potential tank waste moisture data impacts from the remote NIR signal transfer through high humidity vapor space is evaluated

  19. Conceptual Design of Alborz Tokamak Poloidal Coils System

    Mardani, M.; Amrollahi, R.

    2013-04-01

    The Alborz tokamak is a D-shape cross section tokamak that is under construction in Amirkabir University of Technology. One of the most important parts of tokamak design is the design of the poloidal field system. This part includes the numbers, individual position, currents and number of coil turns of the magnetic field coils. Circular cross section tokamaks have Vertical Field system but since the elongation and triangularity of plasma cross section shaping are important in improving the plasma performance and stability, the poloidal field coils are designed to have a shaped plasma configuration. In this paper the design of vertical field system and the magnetohydrodynamic equilibrium of axisymmetric plasma, as given by the Grad-Shafranov equation will be discussed. The poloidal field coils system consists of 12 circular coils located symmetrically about the equator plane, six inner PF coils and six outer PF coils. Six outer poloidal field coils (PF) are located outside of the toroidal field coils (TF), and six inner poloidal field coils are wound on the inner legs and are located outside of a vacuum vessel.

  20. Conceptual design for controller software of mechatronic systems

    Broenink, Johannes F.; Hilderink, G.H.; Bakkers, André; Bradshaw, Alan; Counsell, John

    1998-01-01

    The method and software tool presented here, aims at supporting the development of control software for mechatronic systems. Heterogeneous distributed embedded processors are considered as target hardware. Principles of the method are that the implementation process is a stepwise refinement from

  1. Monitored Retrievable Storage conceptual system studies: closed-cycle vault

    Washington, J.A.; Ganley, J.T.

    1984-02-01

    The Nuclear Waste Policy Act of 1982 requires the DOE to submit a proposal to Congress by June 1985 for the construction of one or more Monitored Retrieval Storage (MRS) facilities. In response, the DOE initiated studies to develop system descriptions and cost estimates for preconceptual designs of storage concepts suitable for use at MRS facilities. This report provides a system description and cost estimates for a Closed-Cycle Vault (CCV) MRS facility. The facility description is divided into four parts: (1) the R and H area, (2) the interface facility, (3) the on-site transport system, and (4) the storage system. The MRS facility has been designed to meet handling rates of 1800 and 3000 MTU/yr. The corresponding peak inventories are 15,000 and 72,000 MTU. Three types of cases were considered, based on the material to be stored: (1) Spent fuel only; (2) HLW and TRU waste; and (3) HLW only. For each of these three types, a cost estimate was done for a 15,000 and a 72,000 MTU facility, resulting in six different cost estimates. Section 4 presents the cost analysis of the CCV MRS system. Tables 4-2 through 4-7 give the construction or capital costs for the six cases. Tables 4-8 through 4-13 show the total discounted life-cycle costs for each of the six cases. These life-cycle costs include operating and decommissioning costs. These tables also show the time distribution of the capital costs. Table 2-1 summarizes the capital, operating, and discounted costs for the six cases studied. 2 references, 15 figures, 18 tables

  2. A Conceptual Model for Analysing Collaborative Work and Products in Groupware Systems

    Duque, Rafael; Bravo, Crescencio; Ortega, Manuel

    Collaborative work using groupware systems is a dynamic process in which many tasks, in different application domains, are carried out. Currently, one of the biggest challenges in the field of CSCW (Computer-Supported Cooperative Work) research is to establish conceptual models which allow for the analysis of collaborative activities and their resulting products. In this article, we propose an ontology that conceptualizes the required elements which enable an analysis to infer a set of analysis indicators, thus evaluating both the individual and group work and the artefacts which are produced.

  3. Utilizing Uncertainty Multidisciplinary Design Optimization for Conceptual Design of Space Systems

    Yao, W.; Guo, J.; Chen, X.; Van Tooren, M.

    2010-01-01

    With progress of space technology and increase of space mission demand, requirements for robustness and reliability of space systems are ever-increasing. For the whole space mission life cycle, the most important decisions are made in the conceptual design phase, so it is very crucial to take

  4. Space systems conceptual design : Analysis methods for engineering-team support

    Ridolfi, G.

    2013-01-01

    The research can be placed in the framework of designing methods for complex systems focused on the conceptual design phase of the systems’ life-cycle. More specifically, the methods presented in the dissertation belong to the category of Operational Research methods. They aim at the creation of

  5. Systems Learning with a Conceptual Representation: A Quasi-Experimental Study

    Hmelo-Silver, Cindy E.; Jordan, Rebecca; Eberbach, Catherine; Sinha, Suparna

    2017-01-01

    In this paper, we share results from a classroom intervention that used a conceptual representation to support reasoning about ecosystems. Engaging students in modeling allows them to make their ideas visible while being malleable and available for discussion, which enables students to make meaning out of systems. Further, the…

  6. ERP II: a conceptual framework for next-generation enterprise systems?

    Møller, Charles

    2005-01-01

    proposes a conceptual framework for extended enterprise resource planning (ERP II). The aim of this model is to compile present ES concepts into a comprehensive outline of ERP II, thus composing a generic map and taxonomy for corporate-wide enterprise systems. Research limitations/implications - The paper...

  7. Environmental Factors Affecting Computer Assisted Language Learning Success: A Complex Dynamic Systems Conceptual Model

    Marek, Michael W.; Wu, Wen-Chi Vivian

    2014-01-01

    This conceptual, interdisciplinary inquiry explores Complex Dynamic Systems as the concept relates to the internal and external environmental factors affecting computer assisted language learning (CALL). Based on the results obtained by de Rosnay ["World Futures: The Journal of General Evolution", 67(4/5), 304-315 (2011)], who observed…

  8. Conceptualizing Teacher Identity as a Complex Dynamic System: The Inner Dynamics of Transformations during a Practicum

    Henry, Alastair

    2016-01-01

    Currently, the inner dynamics of teacher identity transformations remain a "black box." Conceptualizing preservice teacher identity as a complex dynamic system, and the notion of "being someone who teaches" in dialogical terms as involving shifts between different teacher voices, the study investigates the dynamical processes…

  9. The Interactions between Problem Solving and Conceptual Change: System Dynamic Modelling as a Platform for Learning

    Lee, Chwee Beng

    2010-01-01

    This study examines the interactions between problem solving and conceptual change in an elementary science class where students build system dynamic models as a form of problem representations. Through mostly qualitative findings, we illustrate the interplay of three emerging intervening conditions (epistemological belief, structural knowledge…

  10. A System for Computing Conceptual Pathways in Bio-medical Text Models

    Andreasen, Troels; Bulskov, Henrik; Nilsson, Jørgen Fischer

    2014-01-01

    This paper describes the key principles in a system for querying and conceptual path finding in a logic-based knowledge base. The knowledge base is extracted from textual descriptions in bio-, pharma- and medical areas. The knowledge base applies natural logic, that is, a variable-free term...

  11. Literature Review of Enterprise Systems Research Using Institutional Theory: Towards a Conceptual Model

    Svejvig, Per

    This paper sets out to examine the use of institutional theory as a conceptually rich lens to study social issues of enterprise systems (ES) research. More precisely, the purpose is to categorize current ES research using institutional theory to develop a conceptual model that advances ES research...... model which advocates for multi-level and multi-theory approaches, and applies newer institutional aspects such as institutional logics. The findings show that institutional theory in ES research is in its infancy and adopts mainly traditional institutional aspects like isomorphism....... Key institutional features are presented such as isomorphism, rationalized myths, bridging macro and micro structures, and institutional logics and their implications for ES research are discussed. Through a literature review of 180 articles, of which 18 papers are selected, we build a conceptual...

  12. Conceptual design of bend, compression, and final focus components of ILSE [Induction Linac System Experiment

    Lee, E.P.; Fong, C.; Mukherjee, S.; Thur, W.

    1989-03-01

    The Induction Linac System Experiment (ILSE) includes a 180/degree/ bend system, drift compression line and a final focus, which test the analogous features of a heavy ion driver for inertial fusion. These components are novel in their transport of a space-charge-dominated ion beam with large head-to-tail velocity tilt. Their conceptual design is presented, including calculations of the beam envelope, momentum dispersion, and engineering design of magnets, vacuum system, diagnostics, alignment, and support. 3 refs., 5 figs

  13. Strategies to Move From Conceptual Models to Quantifying Resilience in FEW Systems

    Padowski, J.; Adam, J. C.; Boll, J.; Barber, M. E.; Cosens, B.; Goldsby, M.; Fortenbery, R.; Fowler, A.; Givens, J.; Guzman, C. D.; Hampton, S. E.; Harrison, J.; Huang, M.; Katz, S. L.; Kraucunas, I.; Kruger, C. E.; Liu, M.; Luri, M.; Malek, K.; Mills, A.; McLarty, D.; Pickering, N. B.; Rajagopalan, K.; Stockle, C.; Richey, A.; Voisin, N.; Witinok-Huber, B.; Yoder, J.; Yorgey, G.; Zhao, M.

    2017-12-01

    Understanding interdependencies within Food-Energy-Water (FEW) systems is critical to maintain FEW security. This project examines how coordinated management of physical (e.g., reservoirs, aquifers, and batteries) and non-physical (e.g., water markets, social capital, and insurance markets) storage systems across the three sectors promotes resilience. Coordination increases effective storage within the overall system and enhances buffering against shocks at multiple scales. System-wide resilience can be increased with innovations in technology (e.g., smart systems and energy storage) and institutions (e.g., economic systems and water law). Using the Columbia River Basin as our geographical study region, we use an integrated approach that includes a continuum of science disciplines, moving from theory to practice. In order to understand FEW linkages, we started with detailed, connected conceptual models of the food, energy, water, and social systems to identify where key interdependencies (i.e., overlaps, stocks, and flows) exist within and between systems. These are used to identify stress and opportunity points, develop innovation solutions across FEW sectors, remove barriers to the adoption of solutions, and quantify increases in system-wide resilience to regional and global change. The conceptual models act as a foundation from which we can identify key drivers, parameters, time steps, and variables of importance to build and improve existing systems dynamic and biophysical models. Our process of developing conceptual models and moving to integrated modeling is critical and serves as a foundation for coupling quantitative components with economic and social domain components and analyses of how these interact through time and space. This poster provides a description of this process that pulls together conceptual maps and integrated modeling output to quantify resilience across all three of the FEW sectors (a.k.a. "The Resilience Calculator"). Companion posters

  14. ESSENTIAL CHARACTERISTICS OF AN ERP SYSTEM : CONCEPTUALIZATION AND OPERATIONALIZATION

    Sylvestre Uwizeyemungu

    2012-07-01

    Full Text Available The interest of firms in ERP systems has been echoed in both the scientific andprofessional literature. It is worth noting however that while this literature has becomeincreasingly abundant, there does not yet exist an operational definition of the ERP conceptthat is, if not unanimously, at least widely accepted. This constitutes a handicap for boththe research and practice communities. The present study outlines what could beconsidered as an ERP by first determining the essentially required characteristics of such asystem: integration, flexibility and transversality. Indicators are then provided in order tooperationalise these three characteristics. The study concludes by proposing a researchframework on the impact of an ERP’s key characteristics upon the performance of thesystem in a given organisational setting.

  15. ITER hydrogen isotope separation system conceptual design description

    Busigin, A.; Sood, S.K.; Kveton, O.K.; Dinner, P.J.; Murdoch, D.K.; Leger, D.

    1990-01-01

    This paper presents integrated hydrogen Isotope Separation System (ISS) designs for ITER based on requirements for plasma exhaust processing, neutral beam injection deuterium cleanup, pellet injector propellant detritiation, waste water detritiation, and breeding blanket detritiation. Specific ISS designs are developed for a machine with an aqueous lithium salt blanket (ALSB) and a machine with a solid ceramic breeding blanket (SBB). The differences in the ISS designs arising from the different blanket concepts are highlighted. It is found that the ISS designs for the two blanket concepts considered are very similar with the only major difference being the requirement for an additional large water distillation column for ALSB water detritiation. The extraction of tritium from the ALSB is based on flash evaporation to separate the blanket water from the dissolved Li salt, with the tritiated water then being fed to the ISS for detritiation. This technology is considered to be relatively well understood in comparison to front-end processes for SBB detritiation. In the design of the cryogenic distillation portion of the ISS, it was found that the tritium inventory could be very large (> 600 g) unless specific design measures were taken to reduce it. In the designs which are presented, the tritium inventory has been reduced to about 180 g, which is less than the ITER single-failure release limit of 200 g. Further design optimization and isolation of components is expected to reduce the inventory further. (orig.)

  16. Systems neuroscience in Drosophila: Conceptual and technical advantages.

    Kazama, H

    2015-06-18

    The fruit fly Drosophila melanogaster is ideally suited for investigating the neural circuit basis of behavior. Due to the simplicity and genetic tractability of the fly brain, neurons and circuits are identifiable across animals. Additionally, a large set of transgenic lines has been developed with the aim of specifically labeling small subsets of neurons and manipulating them in sophisticated ways. Electrophysiology and imaging can be applied in behaving individuals to examine the computations performed by each neuron, and even the entire population of relevant neurons in a particular region, because of the small size of the brain. Moreover, a rich repertoire of behaviors that can be studied is expanding to include those requiring cognitive abilities. Thus, the fly brain is an attractive system in which to explore both computations and mechanisms underlying behavior at levels spanning from genes through neurons to circuits. This review summarizes the advantages Drosophila offers in achieving this objective. A recent neurophysiology study on olfactory behavior is also introduced to demonstrate the effectiveness of these advantages. Copyright © 2014 IBRO. Published by Elsevier Ltd. All rights reserved.

  17. Conceptual design of intravenous fluids level monitoring system - a review

    Verma, Prikshit; Padmani, Aniket; Boopathi, M.

    2017-11-01

    In today’s world of automation, there are advancements going on in all the fields. Each work is being automated day by day. However, if we see our current medical care system, some areas require manual caretaker and are loaded with heavy jobs, which consumes a lot of time. Nevertheless, since the work is related to human health, it should be properly done and that too with accuracy. An example of such a particular work is injecting saline or Intravenous (IV) fluids in a patient. The monitoring of such fluids needs utter attention as if the bottle of the fluid is not changed on time, it may lead to various problems for the patients like backflow of blood, blood loss etc. Various researches have been performed to overcome such critical situation. Different monitoring and alerting techniques are described in different researches. So, in our study, we will go through the researches done in this particular field and will see how different ideas are implemented.

  18. Computer-based Creativity Enhanced Conceptual Design Model for Non-routine Design of Mechanical Systems

    LI Yutong; WANG Yuxin; DUFFY Alex H B

    2014-01-01

    Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure(FBS) model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model(CECD) for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions(BOA), and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

  19. Computer-based creativity enhanced conceptual design model for non-routine design of mechanical systems

    Li, Yutong; Wang, Yuxin; Duffy, Alex H. B.

    2014-11-01

    Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure(FBS) model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model(CECD) for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions(BOA), and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

  20. Complex multidisciplinary systems decomposition for aerospace vehicle conceptual design and technology acquisition

    Omoragbon, Amen

    Although, the Aerospace and Defense (A&D) industry is a significant contributor to the United States' economy, national prestige and national security, it experiences significant cost and schedule overruns. This problem is related to the differences between technology acquisition assessments and aerospace vehicle conceptual design. Acquisition assessments evaluate broad sets of alternatives with mostly qualitative techniques, while conceptual design tools evaluate narrow set of alternatives with multidisciplinary tools. In order for these two fields to communicate effectively, a common platform for both concerns is desired. This research is an original contribution to a three-part solution to this problem. It discusses the decomposition step of an innovation technology and sizing tool generation framework. It identifies complex multidisciplinary system definitions as a bridge between acquisition and conceptual design. It establishes complex multidisciplinary building blocks that can be used to build synthesis systems as well as technology portfolios. It also describes a Graphical User Interface Designed to aid in decomposition process. Finally, it demonstrates an application of the methodology to a relevant acquisition and conceptual design problem posed by the US Air Force.

  1. Conceptual design of a neutral-beam injection system for the TFTR

    Ehlers, K.W.; Berkner, K.H.; Cooper, W.S.; Hooper, E.B.; Pyle, R.V.; Stearns, J.W.

    1975-11-01

    The neutral-beam injection requirements for heating and fueling the next generation of fusion reactor experiments far exceed those of present devices; the neutral-beam systems needed to meet these requirements will be large and complex. A conceptual design of a TFTR tokamak injection system to produce 120 keV deuterium-ion beams with a total power of about 80 MW is given

  2. Conceptual design of small-sized HTGR system (1). Major specifications and system designs

    Ohashi, Hirofumi; Sato, Hiroyuki; Tazawa, Yujiro; Yan, Xing L.; Tachibana, Yukio

    2011-06-01

    Japan Atomic Energy Agency (JAEA) has started a conceptual design of a 50MWt small-sized high temperature gas cooled reactor (HTGR) for steam supply and electricity generation (HTR50S), which is a first-of-kind of the commercial plant or a demonstration plant of a small-sized HTGR system for steam supply to the industries and district heating and electricity generation by a steam turbine, to deploy in developing countries in the 2030s. The design philosophy is that the HTR50S is a high advanced reactor, which is reducing the R and D risk based on the HTTR design, upgrading the performance and reducing the cost for commercialization by utilizing the knowledge obtained by the HTTR operation and the GTHTR300 design. The major specifications of the HTR50S were determined and targets of the technology demonstration using the HTR50S (e.g., the increasing the power density, reduction of the number of uranium enrichment in the fuel, increasing the burn up, side-by-side arrangement between the reactor pressure vessel and the steam generator) were identified. In addition, the system design of HTR50S, which offers the capability of electricity generation, cogeneration of electricity and steam for a district heating and industries, was performed. Furthermore, a market size of small-sized HTGR systems was investigated. (author)

  3. Planning for a data base system to support satellite conceptual design

    Claydon, C. R.

    1976-01-01

    The conceptual design of an automated satellite design data base system is presented. The satellite catalog in the system includes data for all earth orbital satellites funded to the hardware stage for launch between 1970 and 1980, and provides a concise compilation of satellite capabilities and design parameters. The cost of satellite subsystems and components will be added to the base. Data elements are listed and discussed. Sensor and science and applications opportunities catalogs will be included in the data system. Capabilities of the BASIS storage, retrieval, and analysis system are used in the system design.

  4. Conceptual design of a Langmuir probe system for the tokamak ASDEX-UPGRADE

    Anastassiadis, A.; Tsingas, A.C.; Tsois, N.N.; Zoumbos, G.A.

    1985-05-01

    The conceptual design of a Langmuir probe system for the tokamak ASDEX-UPG is presented. This system is intended to carry out electrostatic measurements, in space and time, on the boundary layer plasma over the largest possible volume of the divertor plasma during discharges. Conducted by preset design requirements a fast probe system is proposed. During discharges signal measurements will be performed by means of a data-acquisition system and the motion will be controlled by a real-time computer. The desired information concerning plasma parameters and the motion of the probe system will be available to the diagnostician via a video display unit. (author)

  5. A conceptual framework to analyze and mitigate aging effects of a system in nuclear power plants

    Ahmed, S.

    1985-01-01

    A conceptual framework is developed to analyze, characterize, and mitigate the degradation of a system in a nuclear power plant due to aging. The system is evaluated, based on an aging-specific system decision model, to understand and implement decisions pertaining to surveillance, maintenance, and replacement. Decisions on other corrective measures to mitigate the effects of aging of a number of equipment items, interconnections (relationships with other systems), and interfaces (relationships within the system) can also be made based on the proposed approach

  6. Conceptual design of the handling and storage system for spent target vessel

    Adachi, Junichi; Sasaki, Shinobu; Kaminaga, Masanori; Hino, Ryutaro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-03-01

    A conceptual design of a handling and storage system for spent target vessels has been carried out, in order to establish spent target technology for the neutron scattering facility. The spent target vessels must be treated remotely with high reliability and safety, since they are highly activated and contain the poisonous mercury. The system is composed of a target exchange trolley to exchange the target vessel, remote handling equipment such as manipulators, airtight casks for the spent target vessel, storage pits and so on. This report presents the results of conceptual design study on a basic plan, a handling procedure, main devices and their arrangement of a handling and storage system for the spent target vessels. (author)

  7. Talking about quality: exploring how 'quality' is conceptualized in European hospitals and healthcare systems.

    Wiig, Siri; Aase, Karina; von Plessen, Christian; Burnett, Susan; Nunes, Francisco; Weggelaar, Anne Marie; Anderson-Gare, Boel; Calltorp, Johan; Fulop, Naomi

    2014-10-11

    Conceptualization of quality of care - in terms of what individuals, groups and organizations include in their meaning of quality, is an unexplored research area. It is important to understand how quality is conceptualised as a means to successfully implement improvement efforts and bridge potential disconnect in language about quality between system levels, professions, and clinical services. The aim is therefore to explore and compare conceptualization of quality among national bodies (macro level), senior hospital managers (meso level), and professional groups within clinical micro systems (micro level) in a cross-national study. This cross-national multi-level case study combines analysis of national policy documents and regulations at the macro level with semi-structured interviews (383) and non-participant observation (803 hours) of key meetings and shadowing of staff at the meso and micro levels in ten purposively sampled European hospitals (England, the Netherlands, Portugal, Sweden, and Norway). Fieldwork at the meso and micro levels was undertaken over a 12-month period (2011-2012) and different types of micro systems were included (maternity, oncology, orthopaedics, elderly care, intensive care, and geriatrics). The three quality dimensions clinical effectiveness, patient safety, and patient experience were incorporated in macro level policies in all countries. Senior hospital managers adopted a similar conceptualization, but also included efficiency and costs in their conceptualization of quality. 'Quality' in the forms of measuring indicators and performance management were dominant among senior hospital managers (with clinical and non-clinical background). The differential emphasis on the three quality dimensions was strongly linked to professional roles, personal ideas, and beliefs at the micro level. Clinical effectiveness was dominant among physicians (evidence-based approach), while patient experience was dominant among nurses (patient

  8. Preliminary conceptual design for electrical and I and C system of a new research reactor

    Jung, Hoan Sung; Kim, Y. K.; Kim, M. J.; Kim, H. K.; Ryu, J. S.

    2004-01-01

    The core type and the process system design will be varied according to the reactor's application and capacity. A New research reactor is being designed by KAERI since 2002 and the process systems are not fixed yet. But control and instrument systems are similar to each other even though the application and the size are not same. So the C and I system that encompasses reactor protection system, reactor control system, and computer system was designed conceptually according to the requirements based on new digital technology and HANARO's proven design. The plant electrical system consists of off-site system that delivers bulk electrical power to the reactor site and on-site system that distributes and controls electrical power at the facility. The electrical system includes building service system that consist of lighting, communication, fire detection, grounding, cathodic protection, etc. also. This report describes the design requirements of on-site and off-site electric power system that set up from the codes and standards and the conceptual design based on the design requirements

  9. Conceptual design study on advanced aqueous reprocessing system for fast reactor fuel cycle

    Takata, Takeshi; Koma, Yoshikazu; Sato, Koji; Kamiya, Masayoshi; Shibata, Atsuhiro; Nomura, Kazunori; Ogino, Hideki; Koyama, Tomozo; Aose, Shin-ichi

    2003-01-01

    As a feasibility study on commercialized fast reactor cycle system, a conceptual design study is being progressed for the aqueous and pyrochemical processes from the viewpoint of economical competitiveness, efficient utilization of resources, decreasing environmental impact and proliferation resistance in Japan Nuclear Cycle Development Institute (JNC). In order to meet above-mentioned requirements, the survey on a range of reprocessing technologies and the evaluation of conceptual plant designs against targets for the future fast reactor cycle system have been implemented as the fist phase of the feasibility study. For an aqueous reprocessing process, modification of the conventional PUREX process (a solvent extraction process with purification of U/Pu, with nor recovery of minor actinides (MA)) and investigation of alternatives for the PUREX process has been carried out and design study of advanced aqueous reprocessing system and its alternatives has been conducted. The conceptual design of the advanced aqueous reprocessing system has been updated and evaluated by the latest R and D results of the key technologies such as crystallization, single-cycle extraction, centrifugal contactors, recovery of Am/Cm and waste processing. In this paper, the outline of the design study and the current status of development for advanced aqueous reprocessing system, NEXT process, are mentioned. (author)

  10. A conceptual chemical solidification/stabilization system to remediate radioactive raffinate sludge

    Carpenter, D.J.; Ansted, J.P.; Foldyna, J.T.

    1994-01-01

    Past operations at the U.S. Department of Energy's (DOE) Weldon Spring, Missouri, Superfund Site included the manufacture of nitroaromatic-based munitions and the production of uranium and thorium metal from ore concentrates. These operations generated a large quantity of diverse contaminated waste media including raffinate sludge, soil, sediment, and building debris. These various waste media are contaminated with varying amounts of radionuclides nitroaromatics, metals, metalloids, non-metals, polychlorinated biphenyls (PCBs) and asbestos. The volumes and diversity of contaminants and waste media pose significant challenges in identifying applicable remedial technologies, particularly for the excavation and treatment of the water-rich raffinate sludge. This paper presents the results of comprehensive efforts to develop a conceptual chemical solidification/stabilization (CSS) system to treat a variety of waste media. The emphasis of this paper is the treatment of a water-rich refractory raffinate sludge and site contaminated soils both radioactive and nonradioactive. The conceptual system design includes raffinate sludge excavation, dewatering, and CSS processing (reagent selection and formulation, reagent and waste storage and metering, and product mixing). Many innovations were incorporated into the design, producing a system that can process the various waste types. Additionally, the radioactive and hazardous constituents are sufficiently immobilized to allow the secured disposal in a waste cell of the treated product. The conceptual CSS system can also produce a variety of treated product types, ranging from a monolithic form to a compactible soil-like medium. The advantages of this system flexibility are also presented

  11. System Sensitivity Analysis Applied to the Conceptual Design of a Dual-Fuel Rocket SSTO

    Olds, John R.

    1994-01-01

    This paper reports the results of initial efforts to apply the System Sensitivity Analysis (SSA) optimization method to the conceptual design of a single-stage-to-orbit (SSTO) launch vehicle. SSA is an efficient, calculus-based MDO technique for generating sensitivity derivatives in a highly multidisciplinary design environment. The method has been successfully applied to conceptual aircraft design and has been proven to have advantages over traditional direct optimization methods. The method is applied to the optimization of an advanced, piloted SSTO design similar to vehicles currently being analyzed by NASA as possible replacements for the Space Shuttle. Powered by a derivative of the Russian RD-701 rocket engine, the vehicle employs a combination of hydrocarbon, hydrogen, and oxygen propellants. Three primary disciplines are included in the design - propulsion, performance, and weights & sizing. A complete, converged vehicle analysis depends on the use of three standalone conceptual analysis computer codes. Efforts to minimize vehicle dry (empty) weight are reported in this paper. The problem consists of six system-level design variables and one system-level constraint. Using SSA in a 'manual' fashion to generate gradient information, six system-level iterations were performed from each of two different starting points. The results showed a good pattern of convergence for both starting points. A discussion of the advantages and disadvantages of the method, possible areas of improvement, and future work is included.

  12. Revised conceptualization of the North China Basin groundwater flow system: Groundwater age, heat and flow simulations

    Cao, Guoliang; Han, Dongmei; Currell, Matthew J.; Zheng, Chunmiao

    2016-09-01

    Groundwater flow in deep sedimentary basins results from complex evolution processes on geological timescales. Groundwater flow systems conceptualized according to topography and/or groundwater table configuration generally assume a near-equilibrium state with the modern landscape. However, the time to reach such a steady state, and more generally the timescales of groundwater flow system evolution are key considerations for large sedimentary basins. This is true in the North China Basin (NCB), which has been studied for many years due to its importance as a groundwater supply. Despite many years of study, there remain contradictions between the generally accepted conceptual model of regional flow, and environmental tracer data. We seek to reconcile these contractions by conducting simulations of groundwater flow, age and heat transport in a three dimensional model, using an alternative conceptual model, based on geological, thermal, isotope and historical data. We infer flow patterns under modern hydraulic conditions using this new model and present the theoretical maximum groundwater ages under such a flow regime. The model results show that in contrast to previously accepted conceptualizations, most groundwater is discharged in the vicinity of the break-in-slope of topography at the boundary between the piedmont and central plain. Groundwater discharge to the ocean is in contrast small, and in general there are low rates of active flow in the eastern parts of the basin below the central and coastal plain. This conceptualization is more compatible with geochemical and geothermal data than the previous model. Simulated maximum groundwater ages of ∼1 Myrs below the central and coastal plain indicate that residual groundwater may be retained in the deep parts of the basin since being recharged during the last glacial period or earlier. The groundwater flow system has therefore probably not reached a new equilibrium state with modern-day hydraulic conditions. The

  13. A conceptual connectivity framework for understanding geomorphic change in human-impacted fluvial systems

    Pöppl, Ronald; Keesstra, Saskia; Maroulis, Jerry

    2017-04-01

    Human-induced landscape change is difficult to predict due to the complexity inherent in both geomorphic and social systems as well as due to emerging coupling relationships between them. To better understand system complexity and system response to change, connectivity has become an important research paradigm within various disciplines including geomorphology, hydrology and ecology. With the proposed conceptual connectivity framework on geomorphic change in human-impacted fluvial systems a cautionary note is flagged regarding the need (i) to include and to systematically conceptualise the role of different types of human agency in altering connectivity relationships in geomorphic systems and (ii) to integrate notions of human-environment interactions to connectivity concepts in geomorphology to better explain causes and trajectories of landscape change. Underpinned by case study examples, the presented conceptual framework is able to explain how geomorphic response of fluvial systems to human disturbance is determined by system-specific boundary conditions (incl. system history, related legacy effects and lag times), vegetation dynamics and human-induced functional relationships (i.e. feedback mechanisms) between the different spatial dimensions of connectivity. It is further demonstrated how changes in social systems can trigger a process-response feedback loop between social and geomorphic systems that further governs the trajectory of landscape change in coupled human-geomorphic systems.

  14. Conceptual design of coal-fueled diesel system for stationary power applications

    1989-05-01

    A preliminary conceptual design of a coal-fueled diesel system was prepared as part of a previous systems study. Since then, our team has accumulated extensive results from testing coal-water slurry on the 13-inch bore JS engine (400 rpm) in 1987 and 1988. These results provided new insights into preferred design concepts for engine components. One objective, therefore, was to revise the preliminary design to incorporate these preferred design concepts. In addition there were certain areas where additional, more detailed analysis was required as a result of the previous conceptual design. Another objective, therefore was to perform additional detailed design efforts, such as: (1) market applications and engine sizes, (2) coal-water slurry cleaning and grinding processes, (3) emission controls and hot gas contaminant controls, (4) component durability, (5) cost and performance assessments. (VC)

  15. Application of Recommended Design Practices for Conceptual Nuclear Fusion Space Propulsion Systems

    Williams, Craig H.

    2004-01-01

    An AIAA Special Project Report was recently produced by AIAA's Nuclear and Future Flight Propulsion Technical Committee and is currently in peer review. The Report provides recommended design practices for conceptual engineering studies of nuclear fusion space propulsion systems. Discussion and recommendations are made on key topics including design reference missions, degree of technological extrapolation and concomitant risk, thoroughness in calculating mass properties (nominal mass properties, weight-growth contingency and propellant margins, and specific impulse), and thoroughness in calculating power generation and usage (power-flow, power contingencies, specific power). The report represents a general consensus of the nuclear fusion space propulsion system conceptual design community and proposes 15 recommendations. This paper expands on the Report by providing specific examples illustrating how to apply each of the recommendations.

  16. Codevelopment of conceptual understanding and critical attitude: toward a systemic analysis of the survival blanket

    Viennot, Laurence; Décamp, Nicolas

    2016-01-01

    One key objective of physics teaching is the promotion of conceptual understanding. Additionally, the critical faculty is universally seen as a central quality to be developed in students. In recent years, however, teaching objectives have placed stronger emphasis on skills than on concepts, and there is a risk that conceptual structuring may be disregarded. The question therefore arises as to whether it is possible for students to develop a critical stance without a conceptual basis, leading in turn to the issue of possible links between the development of conceptual understanding and critical attitude. In an in-depth study to address these questions, the participants were seven prospective physics and chemistry teachers. The methodology included a ‘teaching interview’, designed to observe participants’ responses to limited explanations of a given phenomenon and their ensuing intellectual satisfaction or frustration. The explanatory task related to the physics of how a survival blanket works, requiring a full and appropriate system analysis of the blanket. The analysis identified five recurrent lines of reasoning and linked these to judgments of adequacy of explanation, based on metacognitive/affective (MCA) factors, intellectual (dis)satisfaction and critical stance. Recurrent themes and MCA factors were used to map the intellectual dynamics that emerged during the interview process. Participants’ critical attitude was observed to develop in strong interaction with their comprehension of the topic. The results suggest that most students need to reach a certain level of conceptual mastery before they can begin to question an oversimplified explanation, although one student’s replies show that a different intellectual dynamics is also possible. The paper ends with a discussion of the implications of these findings for future research and for decisions concerning teaching objectives and the design of learning environments.

  17. Conceptual design report for a Fusion Engineering Device sector-handling machine and movable manipulator system

    Watts, K.D.; Masson, L.S.; McPherson, R.S.

    1982-10-01

    Design requirements, trade studies, design descriptions, conceptual designs, and cost estimates have been completed for the Fusion Engineering Device sector handling machine, movable manipulator system, subcomponent handling machine, and limiter blade handling machine. This information will be used by the Fusion Engineering Design Center to begin to determine the cost and magnitude of the effort required to perform remote maintenance on the Fusion Engineering Device. The designs presented are by no means optimum, and the costs estimates are rough-order-of-magnitude

  18. Conceptual Framework: Development of Interactive Reading Malay Language Learning System (I-ReaMaLLS

    Ismail Nurulisma

    2018-01-01

    Full Text Available Reading is very important to access knowledge. Reading skills starts during preschool level no matter of the types of languages. At present, there are many preschool children who are still unable to recognize letters or even words. This leads to the difficulties in reading. Therefore, there is a need of intervention in reading to overcome such problems. Thus, technologies were adapted in enhancing learning skills, especially in learning to read among the preschool children. Phonological is one of the factors to be considered to ensure a smooth of transition into reading. Phonological concept enables the first learner to easily learn reading such to learn reading Malay language. The medium of learning to read Malay language can be assisted via the supportive of multimedia technology to enhance the preschool children learning. Thus, an interactive system is proposed via a development of interactive reading Malay language learning system, which is called as I-ReaMaLLS. As a part of the development of I-ReaMaLLS, this paper focus on the development of conceptual framework in developing interactive reading Malay language learning system (I-ReaMaLLS. I-ReaMaLLS is voice based system that facilitates the preschool learner in learning reading Malay language. The conceptual framework of developing I-ReaMaLLS is conceptualized based on the initial study conducted via methods of literature review and observation with the preschool children, aged 5 – 6 years. As the result of the initial study, research objectives have been affirmed that finally contributes to the design of conceptual framework for the development of I-ReaMaLLS.

  19. Preliminary conceptual design of the blanket and power conversion system for the Mirror Hybrid Reactor

    Schultz, K.R.; Culver, D.W.; Rao, S.B.; Rao, S.R.

    1978-01-01

    A conceptual design of a commercial Mirror Hybrid Reactor, optimized for 239 Pu production, has been completed. This design is the product of a joint effort by Lawrence Livermore Laboratory and General Atomic Company, and follows directly from earlier work on the Mirror Hybrid. This paper describes the blanket and power conversion system of the reactor design. Included are descriptions of the prestressed concrete reactor vessel that supports the magnets and contains the blanket and power conversion system components, the blanket module design, the blanket fuel design, and the power conversion system

  20. Systems engineering aspects of a preliminary conceptual design of the space station environmental control and life support system

    Lin, C. H.; Meyer, M. S.

    1983-01-01

    The systems engineering aspects of developing a conceptual design of the Space Station Environmental Control and Life Support System (ECLSS) are discussed. Topics covered include defining system requirements and groundrules for approach, formulating possible cycle closure options, and establishing a system-level mass balance on the essential materials processed in oxygen and water cycles. Consideration is also given to the performance of a system trade-off study to determine the best degree of cycle closure for the ECLSS, and the construction of a conceptual design of the ECLSS with subsystem performance specifications and candidate concepts. For the optimum balance between development costs, technological risks, and resupply penalties, a partially closed cycle ECLSS option is suggested.

  1. PC Software graphics tool for conceptual design of space/planetary electrical power systems

    Truong, Long V.

    1995-01-01

    This paper describes the Decision Support System (DSS), a personal computer software graphics tool for designing conceptual space and/or planetary electrical power systems. By using the DSS, users can obtain desirable system design and operating parameters, such as system weight, electrical distribution efficiency, and bus power. With this tool, a large-scale specific power system was designed in a matter of days. It is an excellent tool to help designers make tradeoffs between system components, hardware architectures, and operation parameters in the early stages of the design cycle. The DSS is a user-friendly, menu-driven tool with online help and a custom graphical user interface. An example design and results are illustrated for a typical space power system with multiple types of power sources, frequencies, energy storage systems, and loads.

  2. A Conceptual Framework for Evaluation of Public Health and Primary Care System Performance in Iran

    Jahanmehr, Nader; Rashidian, Arash; Khosravi, Ardeshir; Farzadfar, Farshad; Shariati, Mohammad; Majdzadeh, Reza; Sari, Ali Akbari; Mesdaghinia, Alireza

    2015-01-01

    Introduction: The main objective of this study was to design a conceptual framework, according to the policies and priorities of the ministry of health to evaluate provincial public health and primary care performance and to assess their share in the overall health impacts of the community. Methods: We used several tools and techniques, including system thinking, literature review to identify relevant attributes of health system performance framework and interview with the key stakeholders. The PubMed, Scopus, web of science, Google Scholar and two specialized databases of Persian language literature (IranMedex and SID) were searched using main terms and keywords. Following decision-making and collective agreement among the different stakeholders, 51 core indicators were chosen from among 602 obtained indicators in a four stage process, for monitoring and evaluation of Health Deputies. Results: We proposed a conceptual framework by identifying the performance area for Health Deputies between other determinants of health, as well as introducing a chain of results, for performance, consisting of Input, Process, Output and Outcome indicators. We also proposed 5 dimensions for measuring the performance of Health Deputies, consisting of efficiency, effectiveness, equity, access and improvement of health status. Conclusion: The proposed Conceptual Framework illustrates clearly the Health Deputies success in achieving best results and consequences of health in the country. Having the relative commitment of the ministry of health and Health Deputies at the University of Medical Sciences is essential for full implementation of this framework and providing the annual performance report. PMID:25946937

  3. A conceptual framework for evaluation of public health and primary care system performance in iran.

    Jahanmehr, Nader; Rashidian, Arash; Khosravi, Ardeshir; Farzadfar, Farshad; Shariati, Mohammad; Majdzadeh, Reza; Akbari Sari, Ali; Mesdaghinia, Alireza

    2015-01-26

    The main objective of this study was to design a conceptual framework, according to the policies and priorities of the ministry of health to evaluate provincial public health and primary care performance and to assess their share in the overall health impacts of the community. We used several tools and techniques, including system thinking, literature review to identify relevant attributes of health system performance framework and interview with the key stakeholders. The PubMed, Scopus, web of science, Google Scholar and two specialized databases of Persian language literature (IranMedex and SID) were searched using main terms and keywords. Following decision-making and collective agreement among the different stakeholders, 51 core indicators were chosen from among 602 obtained indicators in a four stage process, for monitoring and evaluation of Health Deputies. We proposed a conceptual framework by identifying the performance area for Health Deputies between other determinants of health, as well as introducing a chain of results, for performance, consisting of Input, Process, Output and Outcome indicators. We also proposed 5 dimensions for measuring the performance of Health Deputies, consisting of efficiency, effectiveness, equity, access and improvement of health status. The proposed Conceptual Framework illustrates clearly the Health Deputies success in achieving best results and consequences of health in the country. Having the relative commitment of the ministry of health and Health Deputies at the University of Medical Sciences is essential for full implementation of this framework and providing the annual performance report.

  4. Conceptual Model for Mitigating Human - Wildlife Conflict based on System Thinking

    Patana, Pindi; Mawengkang, Herman; Silvi Lydia, Maya

    2018-01-01

    In conservation process it is unavoidably that conflict incidents may occur among the people and wild-life in the surrounding of the conservation area. Mitigating conflict between wildlife and people is considered a top conservation priority, particularly in landscapes where high densities of people and wildlife co-occur. This conflict is also happened in Leuser conservation area located in the border of North Sumatra and Aceh province, Indonesia. Easing the conflict problem is very difficult. This paper proposes a conceptual model based on system thinking to explore factors that may have great influence on the conflict and to figure out mitigating the conflict. We show how this conceptual framework can be utilized to analyze the conflict occur and further how it could used to develop a multi- criteria decision model.

  5. The Conceptual Framework of Innovation Development in the Enterprise Management System

    Bondarenko Svitlana A.

    2016-05-01

    Full Text Available The aim of the article is to define the main conceptual framework of innovation development in the enterprise management system on the basis of the systemic approach. The current state of the innovation activity of industrial enterprises and results of introducing innovations in Ukraine have been analyzed, which revealed the absence of an effective system of innovation activity at enterprises. This results from insufficient financial resources, lack of motivation for the enterprise to introduce innovations, unpreparedness of resource provision of innovation process, unformed specific competences for the innovation activity. Besides, the vague state policy on innovation development, lack of efficient mechanisms for its stimulation and provision hinder the practical implementation of the innovation development system at enterprises. The author’s study of modern concepts of innovation development allowed to specify the author’s concept of innovation development in the system of enterprise management. It is proved that management of the enterprise innovation activity is a separate type of management activity and requires an appropriate support. The innovation system including functional, process and executive units is presented as a dynamic model of the enterprise innovation activity. The proposed conceptual approaches give a generalized idea about the place of innovation development in the system of enterprise management

  6. Conceptual definition of a technology development mission for advanced solar dynamic power systems

    Migra, R. P.

    1986-01-01

    An initial conceptual definition of a technology development mission for advanced solar dynamic power systems is provided, utilizing a space station to provide a dedicated test facility. The advanced power systems considered included Brayton, Stirling, and liquid metal Rankine systems operating in the temperature range of 1040 to 1400 K. The critical technologies for advanced systems were identified by reviewing the current state of the art of solar dynamic power systems. The experimental requirements were determined by planning a system test of a 20 kWe solar dynamic power system on the space station test facility. These requirements were documented via the Mission Requirements Working Group (MRWG) and Technology Development Advocacy Group (TDAG) forms. Various concepts or considerations of advanced concepts are discussed. A preliminary evolutionary plan for this technology development mission was prepared.

  7. Use of probabilistic safety assessment in structuring conceptual design of accident mitigation systems

    Nishiura, Hiroshi; Urata, Shigeru; Tsujikura, Yonezo [Kansai Electric Power Co., Inc., Osaka (Japan); Kuroiwa, Katsuya; Fujimoto, Haruo

    2000-07-01

    When there is an opportunity to develop a new safety design, it should be a rational design that serves its intended purpose while giving due consideration to factors such as reliability, economic efficiency, and others. Therefore, we have aimed to establish a methodical conceptual design process for accident mitigation systems as part of the core cooling system. In this consideration, we have proposed a process made up of 4 steps and have confirmed that the PSA method can be used as a tool in this process. (author)

  8. Use of probabilistic safety assessment in structuring conceptual design of accident mitigation systems

    Nishiura, Hiroshi; Urata, Shigeru; Tsujikura, Yonezo; Kuroiwa, Katsuya; Fujimoto, Haruo

    2000-01-01

    When there is an opportunity to develop a new safety design, it should be a rational design that serves its intended purpose while giving due consideration to factors such as reliability, economic efficiency, and others. Therefore, we have aimed to establish a methodical conceptual design process for accident mitigation systems as part of the core cooling system. In this consideration, we have proposed a process made up of 4 steps and have confirmed that the PSA method can be used as a tool in this process. (author)

  9. Systematic approach to the conceptual design of physical protection systems for nuclear facilities

    1978-05-01

    A three-step approach is described which includes (1) facility characterization, (2) development and evaluation of hardware-based safeguards systems configurations, and (3) hardware and response force trade-off analysis. The purpose of the report is to establish a vehicle for initial examination and discussion by potential industry and government users of a formal sequence of activities for the conceptual design of physical protection systems and to identify currently available design tools, such as application reports, handbooks, and computer codes which might support these activities. 17 figs

  10. User requirements and conceptual design of the ITER Electron Cyclotron Control System

    Carannante, Giuseppe, E-mail: Giuseppe.Carannante@F4E.europa.eu [Fusion for Energy, Josep Pla 2, Barcelona 08019 (Spain); Cavinato, Mario [Fusion for Energy, Josep Pla 2, Barcelona 08019 (Spain); Gandini, Franco [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Granucci, Gustavo [Istituto di Fisica del Plasma ENEA-CNR-EURATOM, via Cozzi 53, 20125 Milano (Italy); Henderson, Mark; Purohit, Dharmesh [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Saibene, Gabriella; Sartori, Filippo [Fusion for Energy, Josep Pla 2, Barcelona 08019 (Spain); Sozzi, Carlo [Istituto di Fisica del Plasma ENEA-CNR-EURATOM, via Cozzi 53, 20125 Milano (Italy)

    2015-10-15

    The ITER Electron Cyclotron (EC) plant is a complex system, essential for plasma operation. The system is being designed to supply up to 20 MW of power at 170 GHz; it consists of 24 RF sources (or Gyrotrons) connected by switchable transmission lines to four upper and one equatorial launcher. The complexity of the EC plant requires a Plant Controller, which provides the functional and operational interface with CODAC and the Plasma Control System and coordinates the various Subsystem Control Units, i.e. the local controllers of power supplies, Gyrotrons, transmission lines and launchers. A conceptual design of the Electron Cyclotron Control System (ECCS) was developed, starting from the collection of the user requirements, which have then been organized as a set of operational scenarios exploiting the EC system. The design consists in a thorough functional analysis, including also protection functions, and in the development of a conceptual I&C architecture. The main aim of the work was to identify the physics requirements and to translate them into control system requirements, in order to define the interfaces within the components of the ECCS. The definition of these interfaces is urgent because some of the subsystems are already in an advanced design phase. The present paper describes both the methodology used and the resulting design.

  11. Supporting Instruction By Defining Conceptual Relevance Of Materials: Alignment Of Resources To An Earth Systems Framework

    Menicucci, A. J.; Bean, J. R.

    2017-12-01

    Environmental, geological, and climatological sciences are important facets of physical science education. However, it is often difficult for educators to acquire the necessary resources to facilitate content explanations, and demonstration of the conceptual links between individual lessons. The Understanding Global Change (UGC) Project at the University of California Museum of Paleontology (UCMP) at UC Berkeley is aligning new and existing Earth systems educational resources that are high-quality, interactive and inquiry based. Learning resources are organized by the UGC framework topics (Causes of Change, How the Earth System Works, and Measurable Changes), and focus on exploring topic relationships. Resources are currently aligned with both the UGC framework and the Next Generation Science Standards (NGSS), facilitating broad utility among K-16 educators. The overarching goal of the UGC Project is to provide the necessary resources that guide the construction of coherent, interdisciplinary instructional units. These units can be reinforced through system models, providing visual learning scaffolds for assessments of student content knowledge. Utilizing the central framework of UGC alleviates the long-standing problem of creating coherent instructional units from multiple learning resources, each organized and categorized independently across multiple platforms that may not provide explicit connections among Earth science subjects UGC topic cross listing of learning modules establishes conceptual links. Each resource is linked across several Earth system components, facilitating exploration of relationships and feedbacks between processes. Cross listed topics are therefore useful for development of broad picture learning goals via targeted instructional units. We also anticipate cultivating summaries of the explicit conceptual links explored in each resource from both current teachers and content specialists. Insructional units currated and aligned under the UGC

  12. Integrated design support systems for conceptual design of a space power reactor

    Shimoda, Hiroshi; Yoshikawa, Hidekazu; Takahashi, Makoto; Takeoka, Satoshi; Nagamatsu, Takashi; Ishizaki, Hiroaki

    1999-01-01

    In the process of conceptual design of large and complex engineering systems such as a nuclear power reactor, there must be various human works by several fields of engineers on each stage of design, analysis and evaluation. In this study, we have rearranged the design information to reduce the human workloads and have studied an efficient method to support the conceptual design works by new information technologies. For this purpose, we have developed two design support environments for conceptual design of a space power reactor as a concrete design target. When constructing an integrated design support environment, VINDS, which employs virtual reality(VR) technology, we focused on visualization of physical structure, functional organization and analysis calculation with full usage of easy perception and direct manipulation of VR. On the other hand, when constructing another asynchronous and distributed design support environment, WINDS, which employs WWW technology, we improved the support functions for cooperative design works among various fields of experts. In this paper, the basic concepts, configurations and functions of the design support environments are first described, then the future improvement is surveyed by their intercomparison. (author)

  13. Magnetohydrodynamics (MHD) Engineering Test Facility (ETF) 200 MWe power plant. Conceptual Design Engineering Report (CDER) supplement. Magnet system special investigations

    1981-01-01

    The results of magnet system special investigations listed below are summarized: 4 Tesla Magnet Alternate Design Study; 6 Tesla Magnet Manufacturability Study. The conceptual design for a 4 Tesla superconducting magnet system for use with an alternate (supersonic) ETF power train is described, and estimated schedule and cost are identified. The magnet design is scaled from the ETF 6 T Tesla design. Results of a manufacturability study and a revised schedule and cost estimate for the ETF 6 T magnet are reported. Both investigations are extensions of the conceptual design of a 6 T magnet system performed earlier as a part of the overall MED-ETF conceptual design described in Conceptual Design Engineering Report (CDER) Vol. V, System Design Description (SDD) 503 dated September, 1981, DOE/NASA/0224-1; NASA CR-165/52.

  14. Conceptual Design Approach to Implementing Hardware-based Security Controls in Data Communication Systems

    Ibrahim, Ahmad Salah; Jung, Jaecheon [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2016-10-15

    In the Korean Advanced Power Reactor (APR1400), safety control systems network is electrically isolated and physically separated from non-safety systems data network. Unidirectional gateways, include data diode fiber-optic cabling and computer-based servers, transmit the plant safety critical parameters to the main control room (MCR) for control and monitoring processes. The data transmission is only one-way from safety to non-safety. Reverse communication is blocked so that safety systems network is protected from potential cyberattacks or intrusions from non-safety side. Most of commercials off-the-shelf (COTS) security devices are software-based solutions that require operating systems and processors to perform its functions. Field Programmable Gate Arrays (FPGAs) offer digital hardware solutions to implement security controls such as data packet filtering and deep data packet inspection. This paper presents a conceptual design to implement hardware-based network security controls for maintaining the availability of gateway servers. A conceptual design of hardware-based network security controls was discussed in this paper. The proposed design is aiming at utilizing the hardware-based capabilities of FPGAs together with filtering and DPI functions of COTS software-based firewalls and intrusion detection and prevention systems (IDPS). The proposed design implemented a network security perimeter between the DCN-I zone and gateway servers zone. Security control functions are to protect the gateway servers from potential DoS attacks that could affect the data availability and integrity.

  15. Socio-Hydrology: Conceptual and Methodological Challenges in the Bidirectional Coupling of Human and Water Systems

    Scott, C. A.

    2014-12-01

    This presentation reviews conceptual advances in the emerging field of socio-hydrology that focuses on coupled human and water systems. An important current challenge is how to better couple the bidirectional influences between human and water systems, which lead to emergent dynamics. The interactions among (1) the structure and dynamics of systems with (2) human values and norms lead to (3) outcomes, which in turn influence subsequent interactions. Human influences on hydrological systems are relatively well understood, chiefly resulting from developments in the field of water resources. The ecosystem-service concept of cultural value has expanded understanding of decision-making beyond economic rationality criteria. Hydrological impacts on social processes are less well developed conceptually, but this is changing with growing attention to vulnerability, adaptation, and resilience, particularly in the face of climate change. Methodological limitations, especially in characterizing the range of human responses to hydrological events and drivers, still pose challenges to modeling bidirectional human-water influences. Evidence from multiple case studies, synthesized in more broadly generic syndromes, helps surmount these methodological limitations and offers the potential to improve characterization and quantification of socio-hydrological systems.

  16. Conceptual Design Approach to Implementing Hardware-based Security Controls in Data Communication Systems

    Ibrahim, Ahmad Salah; Jung, Jaecheon

    2016-01-01

    In the Korean Advanced Power Reactor (APR1400), safety control systems network is electrically isolated and physically separated from non-safety systems data network. Unidirectional gateways, include data diode fiber-optic cabling and computer-based servers, transmit the plant safety critical parameters to the main control room (MCR) for control and monitoring processes. The data transmission is only one-way from safety to non-safety. Reverse communication is blocked so that safety systems network is protected from potential cyberattacks or intrusions from non-safety side. Most of commercials off-the-shelf (COTS) security devices are software-based solutions that require operating systems and processors to perform its functions. Field Programmable Gate Arrays (FPGAs) offer digital hardware solutions to implement security controls such as data packet filtering and deep data packet inspection. This paper presents a conceptual design to implement hardware-based network security controls for maintaining the availability of gateway servers. A conceptual design of hardware-based network security controls was discussed in this paper. The proposed design is aiming at utilizing the hardware-based capabilities of FPGAs together with filtering and DPI functions of COTS software-based firewalls and intrusion detection and prevention systems (IDPS). The proposed design implemented a network security perimeter between the DCN-I zone and gateway servers zone. Security control functions are to protect the gateway servers from potential DoS attacks that could affect the data availability and integrity

  17. Conceptual design of the superconducting magnet system for the helical fusion reactor

    Yanagi, Nagato; Hamaguchi, Shinji; Takahata, Kazuya; Natsume, Kyohei

    2013-01-01

    Current status of conceptual design of superconducting magnet system and low temperature system for the helical fusion reactor are introduced. There are three kinds of candidates of superconducting magnets such as Cable-in-conduit (CIC), Low-Temperature Superconductor (LTS) and High-Temperature Superconductor (HTS). Their characteristic properties, coil designs and cooling systems are stated. The freezer and low temperature distribution system, bus line and current lead, and excitation power source for superconducting coil are reported. The various elements of superconducting magnet system of FFHR-d1, partial cross section of FFHR helical coil using CIC, conceptual diagram of helical coil winding method of FFHR using CIC, relation among mass flow of supercritical helium supplied into CIC conductor and temperature increasing and pressure loss, cross section structure of LTS indirect-cooling conductor at 100 kA, cross section of 100-kA HTS conductor, connection method of helical coil segment and YBCO conductor are illustrated. (S.Y.)

  18. Conceptual design of small-sized HTGR system (3). Core thermal and hydraulic design

    Inaba, Yoshitomo; Sato, Hiroyuki; Goto, Minoru; Ohashi, Hirofumi; Tachibana, Yukio

    2012-06-01

    The Japan Atomic Energy Agency has started the conceptual designs of small-sized High Temperature Gas-cooled Reactor (HTGR) systems, aiming for the 2030s deployment into developing countries. The small-sized HTGR systems can provide power generation by steam turbine, high temperature steam for industry process and/or low temperature steam for district heating. As one of the conceptual designs in the first stage, the core thermal and hydraulic design of the power generation and steam supply small-sized HTGR system with a thermal power of 50 MW (HTR50S), which was a reference reactor system positioned as a first commercial or demonstration reactor system, was carried out. HTR50S in the first stage has the same coated particle fuel as HTTR. The purpose of the design is to make sure that the maximum fuel temperature in normal operation doesn't exceed the design target. Following the design, safety analysis assuming a depressurization accident was carried out. The fuel temperature in the normal operation and the fuel and reactor pressure vessel temperatures in the depressurization accident were evaluated. As a result, it was cleared that the thermal integrity of the fuel and the reactor coolant pressure boundary is not damaged. (author)

  19. Conceptual Design of a Medium-Sized Combined Smart Photovoltaic - Agriculture System - Case Study in Malaysia

    Djojodihardjo Harijono

    2016-01-01

    Full Text Available With the backdrop of sustainable environment, Photo-Voltaic Power System linked to Climate-Smart Agriculture may offer solutions for Sustainable Energy, Climate Change mitigation and Sustainable Agriculture. An overview of the scope, extent and options of such combined - Co-Located PV Agricultural System appropriate for South East Asian setting, in particular, Malaysia and Indonesia is elaborated, for preliminary insight on steps and choices that have to be taken in undertaking such venture. Possible photovoltaic (PV system installation and estimate the cost, performance, and site impacts of different PV options are discussed. Technical, financing and procedural aspects that could assist in the implementation of a Co-located PV system at the site should then be studied for decision options. A brief Framework for Conceptual Design of Co-Located PV-Agricultural System Plant is outlined.

  20. Conceptual study of ECH/ECCD system for fusion DEMO plant

    Sakamoto, K.; Takahashi, K.; Kasugai, A.; Minami, R.; Kobayashi, N.; Nishio, S.; Sato, M.; Tobita, K.

    2006-01-01

    The conceptual study of the electron cyclotron heating and current drive (ECH/ECCD) system for a DEMO reactor was carried out. The ECH/ECCD system was considered on the basis of a design of the DEMO reactor by JAERI. The reactor is a low aspect ratio tokamak, and its size and magnetic field are similar to those of ITER. Therefore, many ECH/ECCD technologies developed at 170 GHz for ITER can be applied. Truly continuous operation is needed for DEMO, and the neutron fluence from the plasma is two orders of magnitude higher than that of ITER. An RF launcher that has reliability under the condition of high neutron fluence is, critically, important. For power deposition control in the plasma, a gyrotron frequency tuning system is considered as the primary candidate to realize a simple and robust launching system, but two RF beam steering systems are discussed as alternatives

  1. Conceptual design of an in-vessel inspection robotic system for Tokamak environment

    Kumar, Prabhat; Raju, Daniel; Ranjan, Vaibhav; Patel, Prateek; Dave, Jatinkumar; Naik, Mehul

    2013-01-01

    An in-vessel inspection robotic system has been conceptualized for operation inside a tokamak vessel. The robotic system is envisaged to comprise of a robotic arm, end-effector, microcontroller and wireless communication system. The end-effector is envisaged to be a special purpose camera for in-situ inspection between plasma shots. The three-link robotic arm, designed for ITER-like environment, has 4 revolute joints- 3 providing manipulation in poloidal plane and the fourth one providing limited movement in adjacent toroidal planes. This paper provides the conceptual design of the system along with kinematic analysis of robotic arm. Solutions have been derived for forward and inverse kinematic models and the Jacobian matrix for the robotic arm linkage. In forward kinematic model, given a set of joint-link parameters, the position and orientation of end-effector are determined with respect to a reference frame. In inverse kinematic model, given the specified position and orientation of end-effector with respect to a reference frame, a set of joint variables are derived that would bring the end-effector into the required posture. Using Jacobian matrix, the relation between the end-effector velocity and the joint velocity of a manipulator is obtained i.e. given the individual joint velocity; the end-effector velocity is obtained. A CAD model has been generated using CATIA to simulate the kinematic model and carry out computational stress analysis. (author)

  2. Conceptual design of the fusion-driven subcritical system FDS-I

    Wu, Y.; Zheng, S.; Zhu, X.; Wang, W.; Wang, H.; Liu, S.; Bai, Y.; Chen, H.; Hu, L.; Chen, M.; Huang, Q.; Huang, D.; Zhang, S.; Li, J.; Chu, D.; Jiang, J.; Song, Y.

    2006-01-01

    The fusion-driven subcritical system (named FDS-I) was previously proposed as an intermediate step toward the final application of fusion energy. A conceptual design of the FDS-I is presented, which consists of the fusion neutron driver with relatively easy-achieved plasma parameters, and the He-gas/liquid lithium-lead Dual-cooled subcritical Waste Transmutation (DWT) blanket used to transmute long-lived radioactive wastes and to generate energy on the basis of self-sustainable fission and fusion fuel cycle. An overview of the FDS-I is given and the specifications of the design analysis are summarized

  3. Preliminary conceptual design of inspection and maintenance for KALIMER reactor system

    Joo, Young Sang; Kim, Seok Hun; Yoo, Bong

    2000-08-01

    In-service inspection and maintenance are very important for improving the safety and availability of nuclear power plants. The conceptual requirements of in-service inspection and maintenance should be reflected in the earlier design process for the verification of the plant operability and reliability. In this report the fundamental approaches of the inspection and maintenance for KALIMER are established to ensure the structural integrity and operability for KALIMER. The general strategy and methodology of maintenance and inspection for the reactor system and components are proposed and described for satisfying the intents of the section XI, division 3, of ASME code and considering the design characteristics of KALIMER.

  4. Progress in the RAMI analysis of a conceptual LHCD system for DEMO

    Mirizzi, F.

    2014-02-01

    Reliability, Availability, Maintainability and Inspectability (RAMI) concepts and techniques, that acquired great importance during the first manned space missions, have been progressively extended to industrial, scientific and consumer equipments to assure them satisfactory performances and lifetimes. In the design of experimental facilities, like tokamaks, mainly aimed at demonstrating validity and feasibility of scientific theories, RAMI analysis has been often left aside. DEMO, the future prototype fusion reactors, will be instead designed for steadily delivering electrical energy to commercial grids, so that the RAMI aspects will assume an absolute relevance since their initial design phases. A preliminary RAMI analysis of the LHCD system for the conceptual EU DEMO reactor is given in the paper.

  5. Progress in the RAMI analysis of a conceptual LHCD system for DEMO

    Mirizzi, F.

    2014-01-01

    Reliability, Availability, Maintainability and Inspectability (RAMI) concepts and techniques, that acquired great importance during the first manned space missions, have been progressively extended to industrial, scientific and consumer equipments to assure them satisfactory performances and lifetimes. In the design of experimental facilities, like tokamaks, mainly aimed at demonstrating validity and feasibility of scientific theories, RAMI analysis has been often left aside. DEMO, the future prototype fusion reactors, will be instead designed for steadily delivering electrical energy to commercial grids, so that the RAMI aspects will assume an absolute relevance since their initial design phases. A preliminary RAMI analysis of the LHCD system for the conceptual EU DEMO reactor is given in the paper

  6. Robotic influence in the conceptual design of mechanical systems in space and vice versa - A survey

    Sanger, George F.

    1988-01-01

    A survey of methods using robotic devices to construct structural elements in space is presented. Two approaches to robotic construction are considered: one in which the structural elements are designed using conventional aerospace techniques which tend to constrain the function aspects of robotics and one in which the structural elements are designed from the conceptual stage with built-in robotic features. Examples are presented of structural building concepts using robotics, including the construction of the SP-100 nuclear reactor power system, a multimirror large aperture IR space telescope concept, retrieval and repair in space, and the Flight Telerobotic Servicer.

  7. Conceptual design for relocation of the underground monitoring systems to ground surface

    Toya, Naruhisa; Ogawa, Ken; Iwatsuki, Teruki; Ohnuki, Kenji

    2015-09-01

    One of the major subjects of the ongoing geoscientific research program, the Mizunami Underground Research Laboratory (MIU) Project in the Tono area, central Japan, is accumulation of knowledge on a recovery of the geological environment during and after the facility closure. Then it is necessary to plan the observation system which can be use of after the backfill of research tunnels. The main purpose of this report is contribution to the detailed design for relocation of the underground monitoring systems to ground surface. We discussed the restriction and requirement for the underground monitoring systems which can be use of after the backfill. Furthermore, we made the conceptual design for relocation of the current underground monitoring systems to ground surface. (author)

  8. Conceptual adsorption system of cooling and heating supplied by solar energy

    Turski Michał

    2016-06-01

    Full Text Available This paper presents the possibility of reducing the demand for nonrenewable primary energy for buildings using a new conceptual adsorption system of cooling and heating supplied by solar energy. Moreover, the aim of this study is to shorten the payback time of investment in the standard adsorption cooling system through its integration with the heating system. Research has been carried out for an energy-efficient medium-sized single-family building with a floor area of 140 m2 and a heat load of 4.2 kW and cold load of 4.41 kW. It has been shown that the use of an adsorption system of cooling and heating supplied by solar energy decreased the demand for nonrenewable primary energy by about 66% compared to the standard building that meets the current requirements.

  9. Governance and Capacity to Manage Resilience of Health Systems: Towards a New Conceptual Framework

    Karl Blanchet

    2017-08-01

    Full Text Available The term resilience has dominated the discourse among health systems researchers since 2014 and the onset of the Ebola outbreak in West Africa. There is wide consensus that the global community has to help build more resilient health systems. But do we really know what resilience means, and do we all have the same vision of resilience? The present paper presents a new conceptual framework on governance of resilience based on systems thinking and complexity theories. In this paper, we see resilience of a health system as its capacity to absorb, adapt and transform when exposed to a shock such as a pandemic, natural disaster or armed conflict and still retain the same control over its structure and functions.

  10. Conceptual design of volume reduction system for ITER low level radioactive waste

    Chon, Je Keun, E-mail: jekeun.chon@iter.org; Beaudoin, Virginie; Pitcher, Charles S.

    2016-11-01

    For ITER Type A (low-level radwaste) radioactive waste process system, the super-compaction of solid wastes is introduced to reduce the waste volume in order to increase the quantity of waste to be enclosed in a final package. A study has been conducted to develop the conceptual design of super-compaction system by exploring the optimum design features of available equipment. The principal finding of the study is that a compactor with a vertical extrusion die that can apply a compressive force of up to 7000 kN will be fit for purpose of ITER Type A waste treatment. The confinement box has been proposed to limit the spread of aerial effluents that might escape from the compacted pellets. In order to increase the packing efficiency of the disposal containers, the height of each pellet will be recorded, enabling the disposal containers to be filled as close as possible to their limit if pellets of an appropriate size are available. The proposed conceptual design of super-compaction system is capable of meeting the objectives and constraints of target waste streams from ITER operation.

  11. Conceptual design of facilities and systems for cold neutron source in HANARO

    Kim, Y. K.; Jung, H. S.; Wu, S. I.; Ahn, S. H.; Park, Y. C.; Cho, Y. G.; Ryu, J. S.; Kim, Y. J.

    2004-05-01

    The systems and facilities for the HANARO cold neutron source consist of hydrogen handling system, vacuum system, gas blanket system, helium refrigeration system and electrical and instrumentation and control system. The overriding safety goal in the system design is to prevent the escape of hydrogen from the system boundary or the ingress of air into the hydrogen boundary. Of primary concern is the release of hydrogen (or intrusion of oxygen) into an area where any subsequent reaction could possibly result in damage to the reactor building or safety systems or components, as well as jeopardize personnel safety. It has been an general rule that all aspects of the system design were based on the demonstrated technology of long standing world-wide. In some cases, other options are also suggested for the flexibility of independent review process. This report hopefully serves as basis for the coming detail design and engineering. This report is mainly concentrated on the conceptual system design performed during the first project year. It includes the key safety design requirements in the beginning, followed by the description of the preliminary system design. At the rear part, building layout and equipment arrangement are briefly introduced for easy understanding of the whole pictures. The design status for the In-Pool Assembly including safety analysis and neutron guide and instruments will be discussed in another report

  12. Conceptual design and related R and D on ITER mechanical based primary pumping system

    Tanzawa, Sadamitsu; Hiroki, Seiji; Abe, Tetsuya; Shimizu, Katsusuke; Inoue, Masahiko; Watanabe, Mitsunori; Iguchi, Masashi; Sugimoto, Tomoko; Inohara, Takashi; Nakamura, Jun-ichi

    2008-12-01

    The primary vacuum pumping system of the International Thermonuclear Experimental Reactor (ITER) exhausts a helium (He) ash resulting from the DT-burn with excess DT fueling gas, as well as performing a variety of functions such as pump-down, leak testing and wall conditioning. A mechanical based vacuum pumping system has some merits of a continuous pumping, a much lower tritium inventory, a lower operational cost and easy maintenance, comparing with a cryopump system, although demerits of an indispensable magnetic shield and insufficient performance for hydrogen (H 2 ) pumping is are well recognized. To overcome the demerits, we newly fabricated and tested a helical grooved pump (HGP) unit suitable for H 2 pumping at the ITER divertor pressure of 0.1-10 Pa. Through this R and D, we successfully established many design and manufacturing databases of large HGP units for the lightweight gas pumping. Based on the databases, we conceptually designed the ITER vacuum pumping system mainly comprising the HGP with an optimal pump unit layout and a magnetic shield. We also designed conceptually the reduced cost (RC)-ITER pumping system, where a compound molecular pump combining turbine bladed rotors and helical grooved ones was mainly used. The ITER mechanical based primary pumping system proposed has eventually been a back-up solution, whereas a cryopump based one was formally selected to the ITER for construction. The mechanical pumps are increasingly used in many areas with well sophisticated performance, so we believe that fusion reactors of subsequent prototype ones will select the mechanical based pumping system due to primarily a high operational reliability and a cost melt. (author)

  13. Conceptual design of small-sized HTGR system (4). Plant design and technical feasibility

    Ohashi, Hirofumi; Sato, Hiroyuki; Yan, Xing L.; Sumita, Junya; Nomoto, Yasunobu; Tazawa, Yujiro; Noguchi, Hiroki; Imai, Yoshiyuki; Tachibana, Yukio

    2013-09-01

    Japan Atomic Energy Agency (JAEA) has started a conceptual design of a 50MWt small-sized high temperature gas cooled reactor (HTGR) for steam supply and electricity generation (HTR50S), which is a first-of-kind of the commercial plant or a demonstration plant of a small-sized HTGR system for steam supply to the industries and district heating and electricity generation by a steam turbine, to deploy in developing countries in the 2020s. HTR50S was designed for steam supply and electricity generation by the steam turbine with the reactor outlet temperature of 750degC as a reference plant configuration. On the other hand, the intermediate heat exchanger (IHX) will be installed in the primary loop to demonstrate the electricity generation by the helium gas turbine and hydrogen production by thermochemical water splitting by utilizing the secondary helium loop with the reactor outlet temperature of 900degC as a future plant configuration. The plant design of HTR50S for the steam supply and electricity generation was performed based on the plant specification and the requirements for each system taking into account for the increase of the reactor outlet coolant temperature from 750degC to 900degC and the installation of IHX. The technical feasibility of HTR50S was confirmed because the designed systems (i.e., reactor internal components, reactor pressure vessel, vessel cooling system, shutdown cooling system, steam generator (SG), gas circulator, SG isolation and drainage system, reactor containment vessel, steam turbine and heat supply system) satisfies the design requirements. The conceptual plant layout was also determined. This paper provides the summary of the plan design and technical feasibility of HTR50S. (author)

  14. Physics of the conceptual design of the ITER plasma control system

    Snipes, J.A., E-mail: Joseph.Snipes@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Bremond, S. [CEA-IRFM, 13108 St Paul-lez-Durance (France); Campbell, D.J. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Casper, T. [1166 Bordeaux St, Pleasanton, CA 94566 (United States); Douai, D. [CEA-IRFM, 13108 St Paul-lez-Durance (France); Gribov, Y. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Humphreys, D. [General Atomics, San Diego, CA 92186 (United States); Lister, J. [Association EURATOM-Confédération Suisse, Ecole Polytechnique Fédérale de Lausanne (EPFL), CRPP, Lausanne CH-1015 (Switzerland); Loarte, A.; Pitts, R. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Sugihara, M., E-mail: Sugihara_ma@yahoo.co.jp [Japan (Japan); Winter, A.; Zabeo, L. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France)

    2014-05-15

    Highlights: • ITER plasma control system conceptual design has been finalized. • ITER's plasma control system will evolve with the ITER research plan. • A sophisticated actuator sharing scheme is being developed to apply multiple coupled control actions simultaneously with a limited set of actuators. - Abstract: The ITER plasma control system (PCS) will play a central role in enabling the experimental program to attempt to sustain DT plasmas with Q = 10 for several hundred seconds and also support research toward the development of steady-state operation in ITER. The PCS is now in the final phase of its conceptual design. The PCS relies on about 45 diagnostic systems to assess real-time plasma conditions and about 20 actuator systems for overall control of ITER plasmas. It will integrate algorithms required for active control of a wide range of plasma parameters with sophisticated event forecasting and handling functions, which will enable appropriate transitions to be implemented, in real-time, in response to plasma evolution or actuator constraints. In specifying the PCS conceptual design, it is essential to define requirements related to all phases of plasma operation, ranging from early (non-active) H/He plasmas through high fusion gain inductive plasmas to fully non-inductive steady-state operation, to ensure that the PCS control functionality and architecture will be capable of satisfying the demands of the ITER research plan. The scope of the control functionality required of the PCS includes plasma equilibrium and density control commonly utilized in existing experiments, control of the plasma heat exhaust, control of a range of MHD instabilities (including mitigation of disruptions), and aspects such as control of the non-inductive current and the current profile required to maintain stable plasmas in steady-state scenarios. Control areas are often strongly coupled and the integrated control of the plasma to reach and sustain high plasma

  15. Physics of the conceptual design of the ITER plasma control system

    Snipes, J.A.; Bremond, S.; Campbell, D.J.; Casper, T.; Douai, D.; Gribov, Y.; Humphreys, D.; Lister, J.; Loarte, A.; Pitts, R.; Sugihara, M.; Winter, A.; Zabeo, L.

    2014-01-01

    Highlights: • ITER plasma control system conceptual design has been finalized. • ITER's plasma control system will evolve with the ITER research plan. • A sophisticated actuator sharing scheme is being developed to apply multiple coupled control actions simultaneously with a limited set of actuators. - Abstract: The ITER plasma control system (PCS) will play a central role in enabling the experimental program to attempt to sustain DT plasmas with Q = 10 for several hundred seconds and also support research toward the development of steady-state operation in ITER. The PCS is now in the final phase of its conceptual design. The PCS relies on about 45 diagnostic systems to assess real-time plasma conditions and about 20 actuator systems for overall control of ITER plasmas. It will integrate algorithms required for active control of a wide range of plasma parameters with sophisticated event forecasting and handling functions, which will enable appropriate transitions to be implemented, in real-time, in response to plasma evolution or actuator constraints. In specifying the PCS conceptual design, it is essential to define requirements related to all phases of plasma operation, ranging from early (non-active) H/He plasmas through high fusion gain inductive plasmas to fully non-inductive steady-state operation, to ensure that the PCS control functionality and architecture will be capable of satisfying the demands of the ITER research plan. The scope of the control functionality required of the PCS includes plasma equilibrium and density control commonly utilized in existing experiments, control of the plasma heat exhaust, control of a range of MHD instabilities (including mitigation of disruptions), and aspects such as control of the non-inductive current and the current profile required to maintain stable plasmas in steady-state scenarios. Control areas are often strongly coupled and the integrated control of the plasma to reach and sustain high plasma

  16. Development the conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation

    Milana; Khan, M. K.; Munive, J. E.

    2014-07-01

    The importance of maintenance has escalated significantly by the increasing of automation in manufacturing process. This condition switches traditional maintenance perspective of inevitable cost into the business competitive driver. Consequently, maintenance strategy and operation decision needs to be synchronized to business and manufacturing concerns. This paper shows the development of conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation (KBIMSO). The framework of KBIMSO is elaborated to show the process of how the KBIMSO works to reach the maintenance decision. By considering the multi-criteria of maintenance decision making, the KB system embedded with GAP and AHP to support integrated maintenance strategy and operation which is novel in this area. The KBIMSO is useful to review the existing maintenance system and give reasonable recommendation of maintenance decisions in respect to business and manufacturing perspective.

  17. 400-MWe consolidated nuclear steam system (CNSS): 1200-MWt/conceptual design

    1977-06-01

    A 1200-MWt consolidated nuclear steam system (CNSS) conceptual design is described. The concept, derived from nuclear merchant ship propulsion steam systems but distinctly different from those systems in detail, incorporates the steam generators within the reactor pressure vessel. This configuration eliminates primary coolant circulating piping external to the reactor pressure vessel since the primary coolant circulating pumps are mounted in the pressure vessel head. So arranged, the maximum piping break that must be assumed is that of the pressurizer surge line, which is substantially smaller than a primary coolant circulating line. A fracture of the pressurizer surge line would result in substantially lower mass and energy release rates of the primary coolant during the assumed loss-of-coolant accident. This in turn makes practical a pressure-suppression containment rather than the ''dry'' containment commonly used for pressurized water reactors

  18. Development the conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation

    Milana; Khan, M K; Munive, J E

    2014-01-01

    The importance of maintenance has escalated significantly by the increasing of automation in manufacturing process. This condition switches traditional maintenance perspective of inevitable cost into the business competitive driver. Consequently, maintenance strategy and operation decision needs to be synchronized to business and manufacturing concerns. This paper shows the development of conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation (KBIMSO). The framework of KBIMSO is elaborated to show the process of how the KBIMSO works to reach the maintenance decision. By considering the multi-criteria of maintenance decision making, the KB system embedded with GAP and AHP to support integrated maintenance strategy and operation which is novel in this area. The KBIMSO is useful to review the existing maintenance system and give reasonable recommendation of maintenance decisions in respect to business and manufacturing perspective

  19. A Conceptual Framework for Design of Embedded Systems and Data Communication for Autonomous Vehicles

    Nielsen, Jens Frederik Dalsgaard; Bendtsen, Jan Dimon; Nielsen, Kirsten Mølgaard

    2005-01-01

    systems in a set of time rings each demanding actions equal in time magnitude. The safety analysis can in an equal way structure the system in safety rings, each demanding fault and failure handling at the same level. The concept deals with the widely differing time demands at different control levels on......This paper describes a conceptual framework for the development of a hierarchal control architecture for an autonomous vehicle. The concept is based on time/frequency and safety analysis on board the vehicle. The time/frequency analysis is used to structure the guidance, navigation and control......-board the vehicle, the integration of sensors and actuators using different communication protocols, integration of wireless communication to a base and payload data handling as well as control, reliability and safety issues. The system is implemented on an autonomous platform mapping spatial density of weed...

  20. A Conceptual Framework for Planning Systemic Human Adaptation to Global Warming

    Tait, Peter W.; Hanna, Elizabeth G.

    2015-01-01

    Human activity is having multiple, inter-related effects on ecosystems. Greenhouse gas emissions persisting along current trajectories threaten to significantly alter human society. At 0.85 °C of anthropogenic warming, deleterious human impacts are acutely evident. Additional warming of 0.5 °C–1.0 °C from already emitted CO2 will further intensify extreme heat and damaging storm events. Failing to sufficiently address this trend will have a heavy human toll directly and indirectly on health. Along with mitigation efforts, societal adaptation to a warmer world is imperative. Adaptation efforts need to be significantly upscaled to prepare society to lessen the public health effects of rising temperatures. Modifying societal behaviour is inherently complex and presents a major policy challenge. We propose a social systems framework for conceptualizing adaptation that maps out three domains within the adaptation policy landscape: acclimatisation, behavioural adaptation and technological adaptation, which operate at societal and personal levels. We propose that overlaying this framework on a systems approach to societal change planning methods will enhance governments’ capacity and efficacy in strategic planning for adaptation. This conceptual framework provides a policy oriented planning assessment tool that will help planners match interventions to the behaviours being targeted for change. We provide illustrative examples to demonstrate the framework’s application as a planning tool. PMID:26334285

  1. COPEWELL: A Conceptual Framework and System Dynamics Model for Predicting Community Functioning and Resilience After Disasters.

    Links, Jonathan M; Schwartz, Brian S; Lin, Sen; Kanarek, Norma; Mitrani-Reiser, Judith; Sell, Tara Kirk; Watson, Crystal R; Ward, Doug; Slemp, Cathy; Burhans, Robert; Gill, Kimberly; Igusa, Tak; Zhao, Xilei; Aguirre, Benigno; Trainor, Joseph; Nigg, Joanne; Inglesby, Thomas; Carbone, Eric; Kendra, James M

    2018-02-01

    Policy-makers and practitioners have a need to assess community resilience in disasters. Prior efforts conflated resilience with community functioning, combined resistance and recovery (the components of resilience), and relied on a static model for what is inherently a dynamic process. We sought to develop linked conceptual and computational models of community functioning and resilience after a disaster. We developed a system dynamics computational model that predicts community functioning after a disaster. The computational model outputted the time course of community functioning before, during, and after a disaster, which was used to calculate resistance, recovery, and resilience for all US counties. The conceptual model explicitly separated resilience from community functioning and identified all key components for each, which were translated into a system dynamics computational model with connections and feedbacks. The components were represented by publicly available measures at the county level. Baseline community functioning, resistance, recovery, and resilience evidenced a range of values and geographic clustering, consistent with hypotheses based on the disaster literature. The work is transparent, motivates ongoing refinements, and identifies areas for improved measurements. After validation, such a model can be used to identify effective investments to enhance community resilience. (Disaster Med Public Health Preparedness. 2018;12:127-137).

  2. A Conceptual Framework for Planning Systemic Human Adaptation to Global Warming

    Peter W. Tait

    2015-08-01

    Full Text Available Human activity is having multiple, inter-related effects on ecosystems. Greenhouse gas emissions persisting along current trajectories threaten to significantly alter human society. At 0.85 °C of anthropogenic warming, deleterious human impacts are acutely evident. Additional warming of 0.5 °C–1.0 °C from already emitted CO2 will further intensify extreme heat and damaging storm events. Failing to sufficiently address this trend will have a heavy human toll directly and indirectly on health. Along with mitigation efforts, societal adaptation to a warmer world is imperative. Adaptation efforts need to be significantly upscaled to prepare society to lessen the public health effects of rising temperatures. Modifying societal behaviour is inherently complex and presents a major policy challenge. We propose a social systems framework for conceptualizing adaptation that maps out three domains within the adaptation policy landscape: acclimatisation, behavioural adaptation and technological adaptation, which operate at societal and personal levels. We propose that overlaying this framework on a systems approach to societal change planning methods will enhance governments’ capacity and efficacy in strategic planning for adaptation. This conceptual framework provides a policy oriented planning assessment tool that will help planners match interventions to the behaviours being targeted for change. We provide illustrative examples to demonstrate the framework’s application as a planning tool.

  3. A Conceptual Framework for Planning Systemic Human Adaptation to Global Warming.

    Tait, Peter W; Hanna, Elizabeth G

    2015-08-31

    Human activity is having multiple, inter-related effects on ecosystems. Greenhouse gas emissions persisting along current trajectories threaten to significantly alter human society. At 0.85 °C of anthropogenic warming, deleterious human impacts are acutely evident. Additional warming of 0.5 °C-1.0 °C from already emitted CO₂ will further intensify extreme heat and damaging storm events. Failing to sufficiently address this trend will have a heavy human toll directly and indirectly on health. Along with mitigation efforts, societal adaptation to a warmer world is imperative. Adaptation efforts need to be significantly upscaled to prepare society to lessen the public health effects of rising temperatures. Modifying societal behaviour is inherently complex and presents a major policy challenge. We propose a social systems framework for conceptualizing adaptation that maps out three domains within the adaptation policy landscape: acclimatisation, behavioural adaptation and technological adaptation, which operate at societal and personal levels. We propose that overlaying this framework on a systems approach to societal change planning methods will enhance governments' capacity and efficacy in strategic planning for adaptation. This conceptual framework provides a policy oriented planning assessment tool that will help planners match interventions to the behaviours being targeted for change. We provide illustrative examples to demonstrate the framework's application as a planning tool.

  4. Conceptual Design of an Online Estimation System for Stigmergic Collaboration and Nodal Intelligence on Distributed DC Systems

    DOORSAMY, W.

    2017-05-01

    Full Text Available The secondary level control of stand-alone distributed energy systems requires accurate online state information for effective coordination of its components. State estimation is possible through several techniques depending on the system's architecture and control philosophy. A conceptual design of an online state estimation system to provide nodal autonomy on DC systems is presented. The proposed estimation system uses local measurements - at each node - to obtain an aggregation of the system's state required for nodal self-control without the need for external communication with other nodes or a central controller. The recursive least-squares technique is used in conjunction with stigmergic collaboration to implement the state estimation system. Numerical results are obtained using a Matlab/Simulink model and experimentally validated in a laboratory setting. Results indicate that the proposed system provides accurate estimation and fast updating during both quasi-static and transient states.

  5. What is health systems responsiveness? Review of existing knowledge and proposed conceptual framework

    Mirzoev, Tolib; Kane, Sumit

    2017-01-01

    Responsiveness is a key objective of national health systems. Responsive health systems anticipate and adapt to existing and future health needs, thus contributing to better health outcomes. Of all the health systems objectives, responsiveness is the least studied, which perhaps reflects lack of comprehensive frameworks that go beyond the normative characteristics of responsive services. This paper contributes to a growing, yet limited, knowledge on this topic. Herewith, we review the current frameworks for understanding health systems responsiveness and drawing on these, as well as key frameworks from the wider public services literature, propose a comprehensive conceptual framework for health systems responsiveness. This paper should be of interest to different stakeholders who are engaged in analysing and improving health systems responsiveness. Our review shows that existing knowledge on health systems responsiveness can be extended along the three areas. First, responsiveness entails an actual experience of people’s interaction with their health system, which confirms or disconfirms their initial expectations of the system. Second, the experience of interaction is shaped by both the people and the health systems sides of this interaction. Third, different influences shape people’s interaction with their health system, ultimately affecting their resultant experiences. Therefore, recognition of both people and health systems sides of interaction and their key determinants would enhance the conceptualisations of responsiveness. Our proposed framework builds on, and advances, the core frameworks in the health systems literature. It positions the experience of interaction between people and health system as the centrepiece and recognises the determinants of responsiveness experience both from the health systems (eg, actors, processes) and the people (eg, initial expectations) sides. While we hope to trigger further thinking on the conceptualisation of health

  6. What is health systems responsiveness? Review of existing knowledge and proposed conceptual framework.

    Mirzoev, Tolib; Kane, Sumit

    2017-01-01

    Responsiveness is a key objective of national health systems. Responsive health systems anticipate and adapt to existing and future health needs, thus contributing to better health outcomes. Of all the health systems objectives, responsiveness is the least studied, which perhaps reflects lack of comprehensive frameworks that go beyond the normative characteristics of responsive services. This paper contributes to a growing, yet limited, knowledge on this topic. Herewith, we review the current frameworks for understanding health systems responsiveness and drawing on these, as well as key frameworks from the wider public services literature, propose a comprehensive conceptual framework for health systems responsiveness. This paper should be of interest to different stakeholders who are engaged in analysing and improving health systems responsiveness. Our review shows that existing knowledge on health systems responsiveness can be extended along the three areas. First, responsiveness entails an actual experience of people's interaction with their health system, which confirms or disconfirms their initial expectations of the system. Second, the experience of interaction is shaped by both the people and the health systems sides of this interaction. Third, different influences shape people's interaction with their health system, ultimately affecting their resultant experiences. Therefore, recognition of both people and health systems sides of interaction and their key determinants would enhance the conceptualisations of responsiveness. Our proposed framework builds on, and advances, the core frameworks in the health systems literature. It positions the experience of interaction between people and health system as the centrepiece and recognises the determinants of responsiveness experience both from the health systems (eg, actors, processes) and the people (eg, initial expectations) sides. While we hope to trigger further thinking on the conceptualisation of health system

  7. Progress in the conceptual design of the ITER cask and plug remote handling system

    Locke, Darren, E-mail: darren.locke@f4e.europa.eu [Fusion for Energy Agency (F4E), Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain); González Gutiérrez, Carmen; Damiani, Carlo [Fusion for Energy Agency (F4E), Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain); Friconneau, Jean-Pierre; Martins, Jean-Pierre [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2014-10-15

    Highlights: • The CPRHS is a complex system with a significant number of complicated interfaces. • Significant effort is being made to ensure that the system requirements are clearly defined. • This solution relates to planned operations and also anticipation of rescue operations. • With the CPRHS performing a safety function process control is being put in place. • All these factors will have a significant impact on the success of the CPRHS. - Abstract: One function of the ITER remote maintenance system is the transportation of in-vessel components and remote handling systems to and from the vacuum vessel and docking stations in the Hot Cell via dedicated galleries and lift. The cask and plug remote handling system (CPRHS) has been adopted as the solution to provide this nuclear confinement and transportation. This paper discusses the development of the conceptual design to-date and presents the processes being implemented to effectively control the subsequent CPRHS development. The CPRHS is a complex suite of systems with a significant number of interfaces with other ITER systems. Significant effort is being made to ensure that the system requirements are comprehensively defined and carefully managed and a feasible solution is developed – including planned and rescue operations. With the CPRHS performing a critical confinement function appropriate processes are being put in place to control the system development of the CPRHS. The expectation is that the combination of these factors will have a significant impact on the successful implementation of the CPRHS.

  8. Progress in the conceptual design of the ITER cask and plug remote handling system

    Locke, Darren; González Gutiérrez, Carmen; Damiani, Carlo; Friconneau, Jean-Pierre; Martins, Jean-Pierre

    2014-01-01

    Highlights: • The CPRHS is a complex system with a significant number of complicated interfaces. • Significant effort is being made to ensure that the system requirements are clearly defined. • This solution relates to planned operations and also anticipation of rescue operations. • With the CPRHS performing a safety function process control is being put in place. • All these factors will have a significant impact on the success of the CPRHS. - Abstract: One function of the ITER remote maintenance system is the transportation of in-vessel components and remote handling systems to and from the vacuum vessel and docking stations in the Hot Cell via dedicated galleries and lift. The cask and plug remote handling system (CPRHS) has been adopted as the solution to provide this nuclear confinement and transportation. This paper discusses the development of the conceptual design to-date and presents the processes being implemented to effectively control the subsequent CPRHS development. The CPRHS is a complex suite of systems with a significant number of interfaces with other ITER systems. Significant effort is being made to ensure that the system requirements are comprehensively defined and carefully managed and a feasible solution is developed – including planned and rescue operations. With the CPRHS performing a critical confinement function appropriate processes are being put in place to control the system development of the CPRHS. The expectation is that the combination of these factors will have a significant impact on the successful implementation of the CPRHS

  9. Initial conceptual design study of self-critical nuclear pumped laser systems

    Rodgers, R. J.

    1979-01-01

    An analytical study of self-critical nuclear pumped laser system concepts was performed. Primary emphasis was placed on reactor concepts employing gaseous uranium hexafluoride (UF6) as the fissionable material. Relationships were developed between the key reactor design parameters including reactor power level, critical mass, neutron flux level, reactor size, operating pressure, and UF6 optical properties. The results were used to select a reference conceptual laser system configuration. In the reference configuration, the 3.2 m cubed lasing volume is surrounded by a graphite internal moderator and a region of heavy water. Results of neutronics calculations yield a critical mass of 4.9 U(235) in the form (235)UF6. The configuration appears capable of operating in a continuous steady-state mode. The average gas temperature in the core is 600 K and the UF6 partial pressure within the lasing volume is 0.34 atm.

  10. System of Information in Conceptual Maps for students of Computer Engineering.

    Lydia Rosa Ríos Rodríguez

    2014-06-01

    Full Text Available The university students, in their daily activities make some decisions which contribute in their professional formation; in many occasions they don't have the enough help to make it in the best way. The systems of information constitute an important alternative to take into consideration in these cases. This work refers to the experience of the department of Computer Engineering of the University of Sancti Spíritus José Martí Pérez (UNISS in the conception and creation of a system of information for the students of the career Computer Engineering on the discipline Artificial Intelligence which uses the conceptual maps as form of representing the information.

  11. Feasibility and conceptual design for a mobile incineration system for combustible LLW

    1982-09-01

    Since volume reduction by incineration, with subsequent solidification before shipping, can result in typical overall reductions between 40 to 1 and 60 to 1 (depending on density), there are strong economic incentives for small generators to incinerate their low-level radioactive wastes, and minimize the volumes for which they must pay to ship and bury. Because of these factors, the concept of a Mobile Incineration System (MIS) appears to be a viable alternative for small generators. This report covers the conceptual design of a MIS consisting of a controlled-air incinerator with the required off-gas treatment system mounted on two semi-trailers which can be brought to the site of the small generator. It also covers the regulatory and licensing aspects, as well as the economics related to the design. 17 tables

  12. Conceptual design report, 200 Area sanitary sewer system: Project 96L-EWL-116

    Pursley, D.L.

    1994-01-01

    Project L-116 will install an integrated sanitary sewer system in the 200 Area. This new system will connect existing sewer systems for facilities that have a foreseeable future, provide capacity and routing for future facilities, and install new septic sewer systems for existing facilities that cannot be feasibly connected to the new sewer system and have a mission that will extend beyond the year 2000. Project L-116 will construct a sanitary sewer collection, treatment, and disposal system for facilities in the 200-East and -West Areas and adjacent areas located on the 200 Area plateau. The existing septic systems will be abandoned or decommissioned in accordance with applicable Washington State and local codes and regulations. The conceptual design for the sanitary sewer system is designed around population forecasts of 5,000 people for 200-West Area and 9,000 people for 200-East Area. The definitive design will be based on the latest forecast populations at the time definitive design is initiated

  13. Ontologies and Formation Spaces for Conceptual ReDesign of Systems

    J. Bíla

    2005-01-01

    Full Text Available This paper discusses ontologies, methods for developing them and languages for representing them. A special ontology for computational support of the Conceptual ReDesign Process (CRDP is introduced with a simple illustrative example of an application. The ontology denoted as Global context (GLB combines features of general semantic networks and features of UML language. The ontology is task-oriented and domain-oriented, and contains three basic strata – GLBExpl(stratum of Explanation, GLBFAct (stratum of Fields of Activities and GLBEnv (stratum of Environment, with their sub-strata. The ontology has been developed to represent functions of systems and their components in CRDP. The main difference between this ontology and ontologies which have been developed to identify functions (the semantic details in those ontologies must be as deep as possible is in the style of the description of the functions. In the proposed ontology, Formation Spaces were used as lower semantic categories the semantic deepness of which is variable and depends on the actual solution approach of a specialised Conceptual Designer.

  14. Conceptual design of Tritium Extraction System for the European HCPB Test Blanket Module

    Ciampichetti, A.; Nitti, F.S.; Aiello, A.; Ricapito, I.; Liger, K.; Demange, D.; Sedano, L.; Moreno, C.; Succi, M.

    2012-01-01

    Highlights: ► HCPB (Helium Cooled Pebble Bed) Test Blanket Module (TBM) to be tested in ITER. ► Tritium extraction by gas purging, removal and transfer to the Tritium Plant. ► Conceptual design of TES and revision of the previous configuration. ► Main components: adsorption column, ZrCo getter beds and PERMCAT reactor. - Abstract: The HCPB (Helium Cooled Pebble Bed) Test Blanket Module (TBM), developed in EU to be tested in ITER, adopts a ceramic containing lithium as breeder material, beryllium as neutron multiplier and helium at 80 bar as primary coolant. In HCPB-TBM the main function of Tritium Extraction System (TES) is to extract tritium from the breeder by gas purging, to remove it from the purge gas and to route it to the ITER Tritium Plant for the final tritium processing. In this paper, starting from a revision of the so far reference process considered for HCPB-TES and considering a new modeling activity aimed to evaluate tritium concentration in purge gas, an updated conceptual design of TES is reported.

  15. A conceptual framework to evaluate human-wildlife interactions within coupled human and natural systems

    Anita T. Morzillo

    2014-09-01

    Full Text Available Landscape characteristics affect human-wildlife interactions. However, there is a need to better understand mechanisms that drive those interactions, particularly feedbacks that exist between wildlife-related impacts, human reaction to and behavior as a result of those impacts, and how land use and landscape characteristics may influence those components within coupled human and natural systems. Current conceptual models of human-wildlife interactions often focus on species population size as the independent variable driving those interactions. Such an approach potentially overlooks important feedbacks among and drivers of human-wildlife interactions that result from mere wildlife presence versus absence. We describe an emerging conceptual framework that focuses on wildlife as a driver of human behavior and allows us to better understand linkages between humans, wildlife, and the broader landscape. We also present results of a pilot analysis related to our own ongoing study of urban rodent control behavior to illustrate one application of this framework within a study of urban landscapes.

  16. Biofunctional Understanding and Conceptual Control: Searching for Systematic Consensus in Systemic Cohesion

    Iran-Nejad, Asghar; Bordbar, Fareed

    2017-01-01

    For first generation scientists after the cognitive revolution, knowers were in active control over all (stages of) information processing. Then, following a decade of transition shaped by intense controversy, embodied cognition emerged and suggested sources of control other than those implied by metaphysical information processing. With a thematic focus on embodiment science and an eye toward systematic consensus in systemic cohesion, the present study explores the roles of biofunctional and conceptual control processes in the wholetheme spiral of biofunctional understanding (see Iran-Nejad and Irannejad, 2017b, Figure 1). According to this spiral, each of the two kinds of understanding has its own unique set of knower control processes. For conceptual understanding (CU), knowers have deliberate attention-allocation control over their first-person “knowthat” and “knowhow” content combined as mutually coherent corequisites. For biofunctional understanding (BU), knowers have attention-allocation control only over their knowthat content but knowhow control content is ordinarily conspicuously absent. To test the hypothesis of differences in the manner of control between CU and BU, participants in two experiments read identical-format statements for internal consistency, as response time was recorded. The results of Experiment 1 supported the hypothesis of differences in the manner of control between the two types of control processes; and Experiment 2 confirmed the results of Experiment 1. These findings are discussed in terms of the predicted differences between BU and CU control processes, their roles in regulating the physically unobservable flow of systemic cohesion in the wholetheme spiral, and a proposal for systematic consensus in systemic cohesion to serve as the second guiding principle in biofunctional embodiment science next to physical science’s first guiding principle of systematic observation. PMID:29114235

  17. Biofunctional Understanding and Conceptual Control: Searching for Systematic Consensus in Systemic Cohesion

    Asghar Iran-Nejad

    2017-10-01

    Full Text Available For first generation scientists after the cognitive revolution, knowers were in active control over all (stages of information processing. Then, following a decade of transition shaped by intense controversy, embodied cognition emerged and suggested sources of control other than those implied by metaphysical information processing. With a thematic focus on embodiment science and an eye toward systematic consensus in systemic cohesion, the present study explores the roles of biofunctional and conceptual control processes in the wholetheme spiral of biofunctional understanding (see Iran-Nejad and Irannejad, 2017b, Figure 1. According to this spiral, each of the two kinds of understanding has its own unique set of knower control processes. For conceptual understanding (CU, knowers have deliberate attention-allocation control over their first-person “knowthat” and “knowhow” content combined as mutually coherent corequisites. For biofunctional understanding (BU, knowers have attention-allocation control only over their knowthat content but knowhow control content is ordinarily conspicuously absent. To test the hypothesis of differences in the manner of control between CU and BU, participants in two experiments read identical-format statements for internal consistency, as response time was recorded. The results of Experiment 1 supported the hypothesis of differences in the manner of control between the two types of control processes; and Experiment 2 confirmed the results of Experiment 1. These findings are discussed in terms of the predicted differences between BU and CU control processes, their roles in regulating the physically unobservable flow of systemic cohesion in the wholetheme spiral, and a proposal for systematic consensus in systemic cohesion to serve as the second guiding principle in biofunctional embodiment science next to physical science’s first guiding principle of systematic observation.

  18. Integration of targeted health interventions into health systems: a conceptual framework for analysis.

    Atun, Rifat; de Jongh, Thyra; Secci, Federica; Ohiri, Kelechi; Adeyi, Olusoji

    2010-03-01

    The benefits of integrating programmes that emphasize specific interventions into health systems to improve health outcomes have been widely debated. This debate has been driven by narrow binary considerations of integrated (horizontal) versus non-integrated (vertical) programmes, and characterized by polarization of views with protagonists for and against integration arguing the relative merits of each approach. The presence of both integrated and non-integrated programmes in many countries suggests benefits to each approach. While the terms 'vertical' and 'integrated' are widely used, they each describe a range of phenomena. In practice the dichotomy between vertical and horizontal is not rigid and the extent of verticality or integration varies between programmes. However, systematic analysis of the relative merits of integration in various contexts and for different interventions is complicated as there is no commonly accepted definition of 'integration'-a term loosely used to describe a variety of organizational arrangements for a range of programmes in different settings. We present an analytical framework which enables deconstruction of the term integration into multiple facets, each corresponding to a critical health system function. Our conceptual framework builds on theoretical propositions and empirical research in innovation studies, and in particular adoption and diffusion of innovations within health systems, and builds on our own earlier empirical research. It brings together the critical elements that affect adoption, diffusion and assimilation of a health intervention, and in doing so enables systematic and holistic exploration of the extent to which different interventions are integrated in varied settings and the reasons for the variation. The conceptual framework and the analytical approach we propose are intended to facilitate analysis in evaluative and formative studies of-and policies on-integration, for use in systematically comparing and

  19. Biofunctional Understanding and Conceptual Control: Searching for Systematic Consensus in Systemic Cohesion.

    Iran-Nejad, Asghar; Bordbar, Fareed

    2017-01-01

    For first generation scientists after the cognitive revolution, knowers were in active control over all (stages of) information processing. Then, following a decade of transition shaped by intense controversy, embodied cognition emerged and suggested sources of control other than those implied by metaphysical information processing. With a thematic focus on embodiment science and an eye toward systematic consensus in systemic cohesion, the present study explores the roles of biofunctional and conceptual control processes in the wholetheme spiral of biofunctional understanding (see Iran-Nejad and Irannejad, 2017b, Figure 1). According to this spiral, each of the two kinds of understanding has its own unique set of knower control processes. For conceptual understanding (CU), knowers have deliberate attention-allocation control over their first-person "knowthat" and "knowhow" content combined as mutually coherent corequisites. For biofunctional understanding (BU), knowers have attention-allocation control only over their knowthat content but knowhow control content is ordinarily conspicuously absent. To test the hypothesis of differences in the manner of control between CU and BU, participants in two experiments read identical-format statements for internal consistency, as response time was recorded. The results of Experiment 1 supported the hypothesis of differences in the manner of control between the two types of control processes; and Experiment 2 confirmed the results of Experiment 1. These findings are discussed in terms of the predicted differences between BU and CU control processes, their roles in regulating the physically unobservable flow of systemic cohesion in the wholetheme spiral, and a proposal for systematic consensus in systemic cohesion to serve as the second guiding principle in biofunctional embodiment science next to physical science's first guiding principle of systematic observation.

  20. A technique of building a value function at the stage of conceptual design of microprocessor systems

    B. N. Chugaev

    2017-01-01

    Full Text Available The aim of this study is to formalize the selection of optimal technical solutions early in the design of microprocessor-based systems, which allows developers to analyze the recommended solutions, and has, in comparison with the traditional «intuitive» approach, at least two undeniable merits. First, the accepted assumptions and limitations are clearly formed. Secondly, it is defined precisely, in what sense the decision is optimal. When designing microprocessor systems (systems hereafter, several characteristics have to be taken into account at the same time. In general, when n properties are taken into account for each of the compared systems, then the solution of the task of choosing “the best” system depends on choosing a function-criterion. Such function is called a value function in the article. A simple quadratic function is suggested as the value function, it can be interpreted as the distance in Euclidean space of systems technical data. The system, which corresponds to the point nearest to the point characterizing the master system with “limiting” characteristics, is considered the best one. This function approximates the designer’s system of preferences signifi cantly better than a “classical” linear value function. In conclusion, note that the developed recommendations allow the designer of complex technical systems to analyze the proposed solutions in the early stages of design and, in case of disagreement with them, to indicate the reasons why he considers them inadequate. The designed machine optimization of technical solutions in conjunction with the traditional engineering approach should allow more reasonable choosing the structure of systems at the stage of systems conceptual design.

  1. Conceptual design of an RTG Shipping and Receiving Facility Transportation System

    Black, S.J.; Gentzlinger, R.C.; Lujan, R.E.

    1994-01-01

    The conceptual design of an RTG Facility Transportation System which is part of the overall RTG Transportation System has been completed and is described in detail. The Facility Transportation System serves to provide locomotion, cooling, shock protection and data acquisition for the RTG package during onloading and offloading sequences. The RTG Shipping ampersand Receiving Facility Transportation System consists of a Transporter Subsystem, a Package Cooling Subsystem, and a Shock Limiting Transit Device Subsystem. The Transporter Subsystem is a custom designed welded steel cart combined with a pneumatically-driven hand tug for locomotion. The Package Cooling Subsystem provides five kilowatts of active liquid cooling via an on-board refrigeration system. The Shock Limiting Transit Device Subsystem consists of a consumable honeycomb anti-shock frame which provides shock protection for the 3855 kg (8500 LB) RTG package. These subsystems have been combined into an integrated system which will facilitate the offloading and onloading of the RTG Package into and out of the semitrailer as well as meet ALARA (as low as reasonably achievable) radiation exposure guidelines

  2. Second-generation mobile satellite system. A conceptual design and trade-off study

    Sue, M. K.; Park, Y. H.

    1985-01-01

    In recent years, interest has grown in the mobile satellite (MSAT) system, a satellite-based communications system capable of providing integrated voice and data services to a large number of users. To explore the potential of a commercial mobile satellite system (MSS) beyond the horizon of the first generation, using technologies of the 1990's and to assist MSAT-X in directing its efforts, a conceptual design has been performed for a second-generation system to be launched around the mid-1990's. The design goal is to maximize the number of satellite channels and/or minimize the overall life-cycle cost, subject to the constraint of utilizing a commercial satellite bus with minimum modifications. To provide an optimal design, a series of trade-offs are performed, including antenna sizing, feed configurations, and interference analysis. Interference is a serious problem for MSAT and often an overlapping feed design is required to reduce interbeam interference. The trade-off studies will show that a simple non-overlapping feed is sufficient for the second-generation system, thus avoiding the need for the complicated beam-forming network that is associated with the overlapping feed designs. In addition, a system that operates at L-band, an alternative frequency band that is being considered by some for possible MSAT applications, is also presented.

  3. Conceptual design of an RTG shipping and receiving facility transportation system

    Black, S.J.; Gentzlinger, R.C.; Lujan, R.E.

    1995-01-01

    The conceptual design of an RTG Facility Transportation System which is part of the overall RTG Transportation System has been completed and is described in detail. The Facility Transportation System serves to provide locomotion, cooling, shock protection and data acquisition for the RTG package during onloading and offloading sequences. The RTG Shipping ampersand Receiving Facility Transportation System consists of a Transporter Subsystem, a Package Cooling Subsystem, and a Shock Limiting Transit Device Subsystem. The Transporter Subsystem is a custom designed welded steel cart combined with a pneumatically-driven hand tug for locomotion. The Package Cooling Subsystem provides five kilowatts of active liquid cooling via an on-board refrigeration system. The Shock Limiting Transit Device Subsystem consists of a consumable honeycomb anti-shock frame which provides shock protection for the 3855 kg (8500 LB) RTG package. These subsystems have been combined into an integrated system which will facilitate the offloading and onloading of the RTG Package into and out of the semitrailer as well as meet ALARA (as low as reasonably achievable) radiation exposure guidelines. copyright 1995 American Institute of Physics

  4. Conceptual design of an interim dry storage system for the Atucha nuclear power plant spent fuels

    Nassini, Horacio E.P.; Fuenzalida Troyano, C.S.; Bevilacqua, Arturo M.; Bergallo, Juan E.

    2005-01-01

    The Atucha I nuclear power station, after completing the rearrangement and consolidation of the spent fuels in the two existing interim wet storage pools, will have enough room for the storage of spent fuel from the operation of the reactor till December 2014. If the operation is extended beyond 2014, or if the reactor is decommissioned, it will be necessary to empty both pools and to transfer the spent fuels to a dry storage facility. This paper shows the progress achieved in the conceptual design of a dry storage system for Atucha I spent fuels, which also has to be adequate, without modifications, for the storage of fuels from the second unity of the nuclear power station, Atucha II, that is now under construction. (author) [es

  5. Conceptual design of a conveyor system for the Philippine multipurpose cobalt-60 gamma irradiation facility

    Borras, A.M.

    1992-01-01

    The Multipurpose Cobalt-60 Gamma Irradiation Facility at the PNRI presently utilizes the batch irradiation method using turntables to rotate the product boxes. The target materials or products are being carried manually or with the use of pushcart through the personnel maze. This paper presents a conceptual design for the best suitable product-handling or conveyor system for the Philippine Multipurpose Cobalt-60 Gamma Irradiation Facility. The main irradiation conveyor line shall be a 55 cm x 200 cm slat-type conveyor made of SUS 304 material that could be operated in a semi-batch continuous flow and/or shuffle-dwell method with a tact-time range of 10 min to 7 h. The products can be irradiated in a single direction, two-pass, two-sided method. (auth.). 11 refs.; 4 figs.; 2 tabs

  6. Artificial Intelligence (AI), Operations Research (OR), and Decision Support Systems (DSS): A conceptual framework

    Parnell, Gregory S.; Rowell, William F.; Valusek, John R.

    1987-01-01

    In recent years there has been increasing interest in applying the computer based problem solving techniques of Artificial Intelligence (AI), Operations Research (OR), and Decision Support Systems (DSS) to analyze extremely complex problems. A conceptual framework is developed for successfully integrating these three techniques. First, the fields of AI, OR, and DSS are defined and the relationships among the three fields are explored. Next, a comprehensive adaptive design methodology for AI and OR modeling within the context of a DSS is described. These observations are made: (1) the solution of extremely complex knowledge problems with ill-defined, changing requirements can benefit greatly from the use of the adaptive design process, (2) the field of DSS provides the focus on the decision making process essential for tailoring solutions to these complex problems, (3) the characteristics of AI, OR, and DSS tools appears to be converging rapidly, and (4) there is a growing need for an interdisciplinary AI/OR/DSS education.

  7. Gestures and metaphors as indicators of conceptual understanding of sedimentary systems

    Riggs, E. M.; Herrera, J. S.

    2012-12-01

    Understanding the geometry and evolution of sedimentary systems and sequence stratigraphy is crucial to the development of geoscientists and engineers working in the petroleum industry. There is a wide variety of audiences within industry who require relatively advanced instruction in this area of geoscience, and there is an equally wide array of approaches to teaching this material in the classroom and field. This research was undertaken to develop a clearer picture of how conceptual understanding in this area of sedimentary geology grows as a result of instruction and how instructors can monitor the completeness and accuracy of student thinking and mental models. We sought ways to assess understanding that did not rely on model-specific jargon but rather was based in physical expression of basic processes and attributes of sedimentary systems. Advances in cognitive science and educational research indicate that a significant part of spatial cognition is facilitated by gesture, (e.g. giving directions, describing objects or landscape features). We aligned the analysis of gestures with conceptual metaphor theory to probe the use of mental image-schemas as a source of concept representation for students' learning of sedimentary processes. In order to explore image schemas that lie in student explanations, we focused our analysis on four core ideas about sedimentary systems that involve sea level change and sediment deposition, namely relative sea level, base level, and sea-level fluctuations and resulting basin geometry and sediment deposition changes. The study included 25 students from three U.S. Midwestern universities. Undergraduate and graduate-level participants were enrolled in senior-level undergraduate courses in sedimentology and stratigraphy. We used semi-structured interviews and videotaping for data collection. We coded the data to focus on deictic, iconic, and metaphoric gestures, and coded interview transcripts for linguistic metaphors using the

  8. Conceptual design of heat transport systems and components of PFBR-NSSS

    Chetal, S.C.; Bhoje, S.B.; Kale, R.D.; Rao, A.S.L.K.; Mitra, T.K.; Selvaraj, A.; Sethi, V.K.; Sundaramoorthy, T.R.; Balasubramaniyan, V.; Vaidyanathan, G.

    1996-01-01

    The production of electrical power from sodium cooled fast reactors in the present power scenario in India demands emphasis on plant economics consistent with safety. Number of heat transport systems/components and the design of principal heat transport components viz sodium pumps, IHX and steam generators play significant role in the plant capital cost and capacity factor. The paper discusses the basis of selection of 2 primary pumps, 4 IHX, 2 secondary loops, 2 secondary pumps and 8 steam generators for the 500 MWe Prototype Fast Breeder Reactor (PFBR), which is now in design stage. The principal design features of primary pump, IHX and steam generator have been selected based on design simplicity, ease of manufacture and utilization of established designs. The paper also describes the conceptual design of above mentioned three components. (author). 3 figs, 2 tabs

  9. A conceptual methodology to design a decision support system to leak detection programs in water networks

    Di Federico, V.; Bottarelli, M.; Di Federico, I.

    2005-01-01

    The paper outlines a conceptual methodology to develop a decision support system to assist technicians managing water networks in selecting the appropriate leak detection method(s). First, the necessary knowledge about the network is recapitulated: location and characteristics of its physical components, but also water demand, breaks in pipes, and water quality data. Second, the water balance in a typical Italian Agency is discussed, suggesting method and procedures to evacuate and/or estimate each term in the mass balance equation. Then the available methods for leak detection are described in detail, from those useful in the pre-localization phase to those commonly adopted to pinpoint pipe failures and allow a rapid repair. Criteria to estimate costs associated with each of these methods are provided. Finally, the proposed structure of the DSS is described [it

  10. A selective deficit in imageable concepts: A window to the organization of the conceptual system

    Aviah eGvion

    2013-06-01

    Full Text Available Nissim, a 64 years old Hebrew-speaking man who sustained an ischemic infarct in the left occipital lobe, exhibited an intriguing pattern. He could hold a deep and fluent conversation about abstract and complex issues, such as the social risks in unemployment, but failed to retrieve imageable words such as ball, spoon, carrot, or giraffe. A detailed study of the words he could and could not retrieve, in tasks of picture naming, tactile naming, and naming to definition indicated that whereas he was able to retrieve abstract words, he had severe difficulties when trying to retrieve imageable words. The same dissociation also applied for proper names – he could retrieve names of people who have no visual image attached to their representation (such as the son of the biblical Abraham, but could not name people who had a visual image (such as his own son, or Barack Obama. When he tried to produce imageable words, he mainly produced perseverations and empty speech, and some semantic paraphasias. He did not produce perseverations when he tried to retrieve abstract words. This suggests that perseverations may occur when the phonological-production system produces a word without proper activation in the semantic lexicon. Nissim evinced a similar dissociation in comprehension – he could understand abstract words and sentences but failed to understand sentences with imageable words, and to match spoken imageable words to pictures or to semantically related imageable words. He was able to understand proverbs with imageable literal meaning but abstract figurative meaning. His comprehension was impaired also in tasks of semantic associations of pictures, pointing to a conceptual, rather than lexical source of the deficit. His visual perception as well as his phonological input and output lexicons and buffers (assessed by auditory lexical decision, word and sentence repetition, and writing to dictation were intact, supporting a selective conceptual system

  11. Defining System Requirements: a critical assessment of the Niam conceptual design procedure

    Peta Darke

    1995-05-01

    Full Text Available Requirements definition is a fundamental activity within information systems development. Social and organisational issues are at the centre of many of the problems experienced during the development and implementation of information systems, and these need to be explored during requirements definition. The NIAM Conceptual Schema Design Procedure (CSDP is a method for identifying and describing information requirements using fact types. This paper discusses some limitations of the information requirements definition step of the CSDP which result from its lack of focus on the socio-organisational dimension of information systems development. Four different approaches to exploring the socio-organisational contexts of systems are discussed. It is proposed that one of these, viewpoint development, be incorporated into the NIAM CSDP to provide a means of exploring and understanding a system's socio organisational context and to ensure that contextual information is a major input to the requirements definition process. This results in an enhanced design procedure. Future and current research areas are identified.

  12. Conceptual design report for the University of Rochester cryogenic target delivery system

    Fagaly, R.L.; Alexander, N.B.; Bourque, R.F.; Dahms, C.F.; Lindgren, J.R.; Miller, W.J. (General Atomics, San Diego, CA (United States)); Bittner, D.N.; Hendricks, C.D. (W.J. Schafer Associates, Livermore, CA (United States))

    1993-05-01

    The upgrade of the Omega laser at the University of Rochester's Laboratory for Laser Energetics (UR/LLE) will result in a need for large targets filled with D[sub 2] or Dt and maintained at cryogenic temperatures. This mandates a cryogenic target delivery system capable of filling, layering, characterizing and delivering cryogenic targets to the Omega Upgrade target chamber. The program goal is to design, construct, and test the entire target delivery system by June 1996. When completed (including an operational demonstration), the system will be shipped to Rochester for reassembly and commissioning in time for the Omega Upgrade cryogenic campaign, scheduled to start in 1998. General Atomics has been assigned the task of developing the conceptual design for the cryogenic target delivery system. Design and fabrication activities will be closely coordinated with the University of Rochester, Lawrence Livermore National laboratory (LLNL) and Los Alamos National Laboratory (LANL), drawing upon their knowledge base in fuel layering and cryogenic characterization. The development of a target delivery system for Omega could also benefit experiments at Lawrence Livermore National Laboratory and the other ICF Laboratories in that the same technologies could be applied to NOVA, the National Ignition Facility or the future Laboratory Microfusion Facility.

  13. Conceptual design report for the University of Rochester cryogenic target delivery system

    Fagaly, R.L.; Alexander, N.B.; Bourque, R.F.; Dahms, C.F.; Lindgren, J.R.; Miller, W.J. [General Atomics, San Diego, CA (United States); Bittner, D.N.; Hendricks, C.D. [W.J. Schafer Associates, Livermore, CA (US)

    1993-05-01

    The upgrade of the Omega laser at the University of Rochester`s Laboratory for Laser Energetics (UR/LLE) will result in a need for large targets filled with D{sub 2} or Dt and maintained at cryogenic temperatures. This mandates a cryogenic target delivery system capable of filling, layering, characterizing and delivering cryogenic targets to the Omega Upgrade target chamber. The program goal is to design, construct, and test the entire target delivery system by June 1996. When completed (including an operational demonstration), the system will be shipped to Rochester for reassembly and commissioning in time for the Omega Upgrade cryogenic campaign, scheduled to start in 1998. General Atomics has been assigned the task of developing the conceptual design for the cryogenic target delivery system. Design and fabrication activities will be closely coordinated with the University of Rochester, Lawrence Livermore National laboratory (LLNL) and Los Alamos National Laboratory (LANL), drawing upon their knowledge base in fuel layering and cryogenic characterization. The development of a target delivery system for Omega could also benefit experiments at Lawrence Livermore National Laboratory and the other ICF Laboratories in that the same technologies could be applied to NOVA, the National Ignition Facility or the future Laboratory Microfusion Facility.

  14. Conceptual design of reactor TRIGA PUSPATI (RTP) spent fuel pool cooling system

    Tonny Lanyau; Mazleha Maskin; Mohd Fazli Zakaria; Mohmammad Suhaimi Kassim; Ahmad Nabil Abdul Rahim; Phongsakorn Prak Tom; Mohd Fairus Abdul Farid; Mohd Huzair Hussain

    2012-01-01

    After undergo about 30 years of safe operation, Reactor TRIGA PUSPATI (RTP) was planned to be upgraded to ensure continuous operation at optimum safety condition. In the meantime, upgrading is essential to get higher flux to diversify the reactor utilization. Spent fuel pool is needed for temporary storage of the irradiated fuel before sending it back to original country for reprocessing, reuse after the upgrading accomplished or final disposal. The irradiated fuel elements need to be secure physically with continuous cooling to ensure the safety of the fuels itself. The decay heat probably still exist even though the fuel elements not in the reactor core. Therefore, appropriate cooling is required to remove the heat produced by decay of the fission product in the irradiated fuel element. The design of spent fuel pool cooling system (SFPCS) was come to mind in order to provide the sufficient cooling to the irradiated fuel elements and also as a shielding. The spent fuel pool cooling system generally equipped with pumps, heat exchanger, water storage tank, valve and piping. The design of the system is based on criteria of the primary cooling system. This paper provides the conceptual design of the spent fuel cooling system. (author)

  15. Conceptual design report for the University of Rochester cryogenic target delivery system

    Fagaly, R.L.; Alexander, N.B.; Bourque, R.F.; Dahms, C.F.; Lindgren, J.R.; Miller, W.J.; Bittner, D.N.; Hendricks, C.D.

    1993-05-01

    The upgrade of the Omega laser at the University of Rochester's Laboratory for Laser Energetics (UR/LLE) will result in a need for large targets filled with D 2 or Dt and maintained at cryogenic temperatures. This mandates a cryogenic target delivery system capable of filling, layering, characterizing and delivering cryogenic targets to the Omega Upgrade target chamber. The program goal is to design, construct, and test the entire target delivery system by June 1996. When completed (including an operational demonstration), the system will be shipped to Rochester for reassembly and commissioning in time for the Omega Upgrade cryogenic campaign, scheduled to start in 1998. General Atomics has been assigned the task of developing the conceptual design for the cryogenic target delivery system. Design and fabrication activities will be closely coordinated with the University of Rochester, Lawrence Livermore National laboratory (LLNL) and Los Alamos National Laboratory (LANL), drawing upon their knowledge base in fuel layering and cryogenic characterization. The development of a target delivery system for Omega could also benefit experiments at Lawrence Livermore National Laboratory and the other ICF Laboratories in that the same technologies could be applied to NOVA, the National Ignition Facility or the future Laboratory Microfusion Facility

  16. Pipe stress analysis on HCCR-TBS ancillary systems in conceptual design

    Ahn, Mu-Young, E-mail: myahn74@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Eo Hwak [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Yi-Hyun; Lee, Youngmin [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2016-11-01

    Highlights: • Pipe stress is performed on Korean HCCR-TBS for the load combinations including seismic events. • The resultant stress meets the requirement of the design code & standard except one position where modification is needed. • The results gives useful information for the design evolution in the next desgin phase. - Abstract: Korean Helium Cooled Ceramic Reflector (HCCR) Test Blanket System (TBS) will be tested in ITER to demonstrate feasibility of the breeding blanket concept. The HCCR-TBS comprises Test Blanket Module (TBM) with associated shield, and ancillary systems located in various positions of ITER building. Currently, conceptual design for the HCCR-TBS is in progress. This paper presents pipe stress analysis results for the HCCR-TBS ancillary systems. The pipe stress analysis was performed in accordance with ASME B31.3 for major pipes of the Helium Cooling System (HCS) and the Coolant Purification System (CPS), which are operated in high pressure and temperature. The pipe stress for various load cases and load combinations were calculated. Operational pressure and temperature during plasma operation are applied as pressure load and thermal load, respectively. In addition seismic events were combined to investigate the code compliance for sustained load case and occasional load case. It was confirmed that the resultant stress meets the requirements of ASME B31.3 except one position in which it needs modification. These results give useful information for the next design phase, for example, nozzle loads for the component selection, the support design parameters, etc.

  17. Pipe stress analysis on HCCR-TBS ancillary systems in conceptual design

    Ahn, Mu-Young; Cho, Seungyon; Lee, Eo Hwak; Park, Yi-Hyun; Lee, Youngmin

    2016-01-01

    Highlights: • Pipe stress is performed on Korean HCCR-TBS for the load combinations including seismic events. • The resultant stress meets the requirement of the design code & standard except one position where modification is needed. • The results gives useful information for the design evolution in the next desgin phase. - Abstract: Korean Helium Cooled Ceramic Reflector (HCCR) Test Blanket System (TBS) will be tested in ITER to demonstrate feasibility of the breeding blanket concept. The HCCR-TBS comprises Test Blanket Module (TBM) with associated shield, and ancillary systems located in various positions of ITER building. Currently, conceptual design for the HCCR-TBS is in progress. This paper presents pipe stress analysis results for the HCCR-TBS ancillary systems. The pipe stress analysis was performed in accordance with ASME B31.3 for major pipes of the Helium Cooling System (HCS) and the Coolant Purification System (CPS), which are operated in high pressure and temperature. The pipe stress for various load cases and load combinations were calculated. Operational pressure and temperature during plasma operation are applied as pressure load and thermal load, respectively. In addition seismic events were combined to investigate the code compliance for sustained load case and occasional load case. It was confirmed that the resultant stress meets the requirements of ASME B31.3 except one position in which it needs modification. These results give useful information for the next design phase, for example, nozzle loads for the component selection, the support design parameters, etc.

  18. Conceptual Network Model From Sensory Neurons to Astrocytes of the Human Nervous System.

    Yang, Yiqun; Yeo, Chai Kiat

    2015-07-01

    From a single-cell animal like paramecium to vertebrates like ape, the nervous system plays an important role in responding to the variations of the environment. Compared to animals, the nervous system in the human body possesses more intricate organization and utility. The nervous system anatomy has been understood progressively, yet the explanation at the cell level regarding complete information transmission is still lacking. Along the signal pathway toward the brain, an external stimulus first activates action potentials in the sensing neuron and these electric pulses transmit along the spinal nerve or cranial nerve to the neurons in the brain. Second, calcium elevation is triggered in the branch of astrocyte at the tripartite synapse. Third, the local calcium wave expands to the entire territory of the astrocyte. Finally, the calcium wave propagates to the neighboring astrocyte via gap junction channel. In our study, we integrate the existing mathematical model and biological experiments in each step of the signal transduction to establish a conceptual network model for the human nervous system. The network is composed of four layers and the communication protocols of each layer could be adapted to entities with different characterizations. We verify our simulation results against the available biological experiments and mathematical models and provide a test case of the integrated network. As the production of conscious episode in the human nervous system is still under intense research, our model serves as a useful tool to facilitate, complement and verify current and future study in human cognition.

  19. Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives

    Zheng, Pai; wang, Honghui; Sang, Zhiqian; Zhong, Ray Y.; Liu, Yongkui; Liu, Chao; Mubarok, Khamdi; Yu, Shiqiang; Xu, Xun

    2018-06-01

    Information and communication technology is undergoing rapid development, and many disruptive technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, have emerged. These technologies are permeating the manufacturing industry and enable the fusion of physical and virtual worlds through cyber-physical systems (CPS), which mark the advent of the fourth stage of industrial production (i.e., Industry 4.0). The widespread application of CPS in manufacturing environments renders manufacturing systems increasingly smart. To advance research on the implementation of Industry 4.0, this study examines smart manufacturing systems for Industry 4.0. First, a conceptual framework of smart manufacturing systems for Industry 4.0 is presented. Second, demonstrative scenarios that pertain to smart design, smart machining, smart control, smart monitoring, and smart scheduling, are presented. Key technologies and their possible applications to Industry 4.0 smart manufacturing systems are reviewed based on these demonstrative scenarios. Finally, challenges and future perspectives are identified and discussed.

  20. Conceptual design of the cryogenic system and estimation of the recirculated power for CFETR

    Liu, Xiaogang; Qiu, Lilong; Li, Junjun; Wang, Zhaoliang; Ren, Yong; Wang, Xianwei; Li, Guoqiang; Gao, Xiang; Bi, Yanfang

    2017-01-01

    The China Fusion Engineering Test Reactor (CFETR) is the next tokamak in China’s roadmap for realizing commercial fusion energy. The CFETR cryogenic system is crucial to creating and maintaining operational conditions for its superconducting magnet system and thermal shields. The preliminary conceptual design of the CFETR cryogenic system has been carried out with reference to that of ITER. It will provide an average capacity of 75 to 80 kW at 4.5 K and a peak capacity of 1300 kW at 80 K. The electric power consumption of the cryogenic system is estimated to be 24 MW, and the gross building area is about 7000 m2. The relationships among the auxiliary power consumed by the cryogenic system, the fusion power gain and the recirculated power of CFETR are discussed, with the suggestion that about 52% of the electric power produced by CFETR in phase II must be recirculated to run the fusion test reactor.

  1. Application of the "Behind the Barriers" resilience conceptual model to a flooded rail transport system

    Gonzva, Michael; Barroca, Bruno

    2017-04-01

    The vulnerability of guided transport systems facing natural hazards is a burning issue for the urban risks management. Experience feedbacks on guided transport systems show they are particularly vulnerable to natural risks, especially flood risks. Besides, the resilience concept is used as a systemic approach for making an accurate analysis of the effect of these natural risks on rail guided transport systems. In this context, several conceptual models of resilience are elaborated for presenting the various possible resilience strategies applied to urban technical systems. One of this resilience conceptual model is the so-called "Behind The Barriers" model based on the identification of four complementary types of resilience: (i) cognitive resilience, linked to knowledge of the risk and the potential failures; (ii) functional resilience, representing the capacity of a system to protect itself from damage while continuing to provide services; (iii) correlative resilience, that characterises the relationship between service demand and the capacity of the system to respond; (iv) organisational resilience, expressing the capacity to mobilise an area much wider than the one affected. In addition to the work already published during the 7th Resilience Engineering Symposium, the purpose of this paper is to offer an application of a resilience conceptual model, the "Behind the Barriers" model, relating to a specific urban technical system, the public guided transport system, and facing a particular risk, a flood hazard. To do that, the paper is focused on a past incident on a French Intercity railway line as a studied case. Indeed, on June 18th and 19th 2013, the rise of the level of the "Gave de Pau" river, located in the municipality of Coarraze, caused many disorders on the intercity line serving the cities of Tarbes, Pau and Lourdes . Among the disorders caused by the flooding, about 100 meters of railway embankments were collapsed. With a constraint to reopen the

  2. Conceptual design of the Virtual Engineering System for High Level Radioactive Waste Geological Disposal

    1999-06-01

    The Virtual Engineering System for the High Level Radioactive Waste Geological Disposal (hereafter the VE) adopts such computer science technologies as advanced numerical simulation technology with special emphasis upon computer graphics, massive parallel computing, high speed networking, knowledge engineering, database technology to virtually construct the natural and the part of social environment of disposal site in syberspace to realize the disposal OS as its final target. The principle of tile VE is to provide for a firm business standpoint after The 2000 Report by JNC and supply decision support system which promotes various evaluations needed to be done from the year of 2000 to the licensing application for disposal to the government. The VE conceptual design was performed in the year of 1998. The functions of the VE are derived from the analysis of work scope of implementing organization in each step of geological waste disposal: the VE functions need the safety performance assessment, individual process analysis, facility designing, cost evaluation, site surveillance, research and development, public acceptance. Then the above functions are materialized by integrating such individual system as geology database, groundwater database, safety performance assessment system, coupled phenomena analysis system, decision support system, cost evaluation system, and public acceptance system. The integration method of the systems was studied. The concept of the integration of simulators has also been studied from the view point of CAPASA program. Parallel computing, networking, and computer graphic for high speed massive scientific calculation were studied in detail as the element technology to achieve the VE. Based on studies stated above, the concept of the waste disposal project and subjects that arise from 1999 to licensing application are decided. (author)

  3. Dynamical system with plastic self-organized velocity field as an alternative conceptual model of a cognitive system.

    Janson, Natalia B; Marsden, Christopher J

    2017-12-05

    It is well known that architecturally the brain is a neural network, i.e. a collection of many relatively simple units coupled flexibly. However, it has been unclear how the possession of this architecture enables higher-level cognitive functions, which are unique to the brain. Here, we consider the brain from the viewpoint of dynamical systems theory and hypothesize that the unique feature of the brain, the self-organized plasticity of its architecture, could represent the means of enabling the self-organized plasticity of its velocity vector field. We propose that, conceptually, the principle of cognition could amount to the existence of appropriate rules governing self-organization of the velocity field of a dynamical system with an appropriate account of stimuli. To support this hypothesis, we propose a simple non-neuromorphic mathematical model with a plastic self-organized velocity field, which has no prototype in physical world. This system is shown to be capable of basic cognition, which is illustrated numerically and with musical data. Our conceptual model could provide an additional insight into the working principles of the brain. Moreover, hardware implementations of plastic velocity fields self-organizing according to various rules could pave the way to creating artificial intelligence of a novel type.

  4. A methodological study on organizing an intelligent CAD/CAE system for conceptual design of advanced nuclear reactor system

    Gofuku, Akio; Yoshikawa, Hidekazu

    1993-01-01

    In order to shorten the time span of design work and enhance both consistency and rationality of design products, the authors are now investigating an intelligent CAD/CAE system to support cooperative works by many specialists by adopting object-oriented approach. In this paper, the cognitive aspect of design activities of specialists in the conceptual design phase of nuclear reactors is discussed. The activities of the specialists in their design analysis process are highly knowledge-based and goal-oriented. The characteristics of the activities are 1) hierarchization of design goal into sub-goals, 2) prioritization of design sub-goals and step-by-step practise of design analysis, and 3) abstraction of real-world space structure into more simplified space structure to cope with theoretical treatment. Based on these consideration, a conceptual design model of specialists' activities composed of attribute modeling and design expertise knowledge base is proposed. The 'principle of functional independence' proposed by Sue is applied to bridge between the attribute modeling and design expertise knowledge base. The intelligent CAD/CAE system is now under development by focusing on the conceptual design of a space power reactor core utilizing thermo-ionic fuel elements as direct thermo-to-electric conversion. A program to calculate thermo-hydraulics of reactor core and thermo-ionic power generation has been developed. An interface has been also developed in order to communicate with the specialists at JAERI by E-mail concerning the interactive calculation between our calculation and the neutronics calculation of reactor core. (orig.)

  5. A methodological study on organizing an intelligent CAD/CAE system for conceptual design of advanced nuclear reactor system

    Gofuku, Akio (Inst. of Atomic Energy, Kyoto Univ. (Japan)); Yoshikawa, Hidekazu (Inst. of Atomic Energy, Kyoto Univ. (Japan))

    1993-04-01

    In order to shorten the time span of design work and enhance both consistency and rationality of design products, the authors are now investigating an intelligent CAD/CAE system to support cooperative works by many specialists by adopting object-oriented approach. In this paper, the cognitive aspect of design activities of specialists in the conceptual design phase of nuclear reactors is discussed. The activities of the specialists in their design analysis process are highly knowledge-based and goal-oriented. The characteristics of the activities are 1) hierarchization of design goal into sub-goals, 2) prioritization of design sub-goals and step-by-step practise of design analysis, and 3) abstraction of real-world space structure into more simplified space structure to cope with theoretical treatment. Based on these consideration, a conceptual design model of specialists' activities composed of attribute modeling and design expertise knowledge base is proposed. The 'principle of functional independence' proposed by Sue is applied to bridge between the attribute modeling and design expertise knowledge base. The intelligent CAD/CAE system is now under development by focusing on the conceptual design of a space power reactor core utilizing thermo-ionic fuel elements as direct thermo-to-electric conversion. A program to calculate thermo-hydraulics of reactor core and thermo-ionic power generation has been developed. An interface has been also developed in order to communicate with the specialists at JAERI by E-mail concerning the interactive calculation between our calculation and the neutronics calculation of reactor core. (orig.)

  6. A conceptual design of the RF system for the NSP high intensity proton accelerator at JAERI

    Chishiro, Etsuji; Kusano, Joichi; Mizumoto, Motoharu; Touchi, Yutaka; Kaneko, Hiroshi; Takado, Hiroshi; Sawada, Junichi

    1999-03-01

    JAERI has been proposing the Neutron Science Project which aims at exploring the fields of basic science and nuclear technology using a high power spallation neutron source. The neutron source will be driven by a high intensity linear accelerator with an energy of 1.5 GeV and an average beam current of 5.33 mA and beam power of 8 MW. The RF system for the accelerator consists of a high-energy accelerator part and a low energy accelerator part. The maximum RF power requirements at the high and low energy accelerator parts are 25 MW and 8.3 MW, respectively. In this report, we describe the conceptual design of the RF system. In the low energy accelerator part, we estimated the requirement for the high-power amplifier tube and made the basis design for RF components. In the high energy accelerator part, we studied the effect of tuning errors, Lorentz forces and microphonics in the superconducting cavity. We calculated the klystron efficiency and supply power in the arrangement of where one klystron distributes the RF power to four cavities. We also considered an IOT RF system. Finally, we describe the electrical capacity and quantity of cooling water in the RF system. (author)

  7. Conceptual Inadequacy of the Shore and Johnson Axioms for Wide Classes of Complex Systems

    Constantino Tsallis

    2015-05-01

    Full Text Available It is by now well known that the Boltzmann-Gibbs-von Neumann-Shannon logarithmic entropic functional (\\(S_{BG}\\ is inadequate for wide classes of strongly correlated systems: see for instance the 2001 Brukner and Zeilinger's {\\it Conceptual inadequacy of the Shannon information in quantum measurements}, among many other systems exhibiting various forms of complexity. On the other hand, the Shannon and Khinchin axioms uniquely mandate the BG form \\(S_{BG}=-k\\sum_i p_i \\ln p_i\\; the Shore and Johnson axioms follow the same path. Many natural, artificial and social systems have been satisfactorily approached with nonadditive entropies such as the \\(S_q=k \\frac{1-\\sum_i p_i^q}{q-1}\\ one (\\(q \\in {\\cal R}; \\,S_1=S_{BG}\\, basis of nonextensive statistical mechanics. Consistently, the Shannon 1948 and Khinchine 1953 uniqueness theorems have already been generalized in the literature, by Santos 1997 and Abe 2000 respectively, in order to uniquely mandate \\(S_q\\. We argue here that the same remains to be done with the Shore and Johnson 1980 axioms. We arrive to this conclusion by analyzing specific classes of strongly correlated complex systems that await such generalization.

  8. Conceptual framework in creating and selecting the performance measurement system for marketing strategy control

    Krstić Bojan

    2011-01-01

    Full Text Available Performance measurement in modern conditions is one of the most important business requirements since enterprises face the need to exhibit returns for stockholders and investors, but also contribution of management to those returns, as well as contribution of certain business units, functional departments and activities within them. Hence, it is particularly important to assess marketing successfulness as a business function according to return on investment in marketing activities, but also according to the set of indicators from following performance groups - marketing effectiveness and marketing efficiency. Core issue is which measures to select and use in the marketing performance measurement system of certain enterprise so that it could be able to assess how effective and efficient its marketing is. In other words, adequate performance measurement system ought to contain performance measures that will be used to monitor effects and marketing strategy implementation process (controlling while implementing, and performance measures that can be applied to overall effect monitoring after the strategy implementation period. Otherwise, creating the marketing performance measurement system is a complex task for marketing managers. Therefore, the aim of this paper is to explore key principles and develop conceptual framework for creating and selecting performance measurement system for marketing strategy control which is based on characteristics and key success factors of marketing strategy, that is activities and actions for its operationalizing and effective implementing.

  9. Towards the conceptual design of the cryogenic system of the Future Circular Collider (FCC)

    Chorowski, M.; Correia Rodrigues, H.; Delikaris, D.; Duda, P.; Haberstroh, C.; Holdener, F.; Klöppel, S.; Kotnig, C.; Millet, F.; Polinski, J.; Quack, H.; Tavian, L.

    2017-12-01

    Following the update of the European strategy in particle physics, CERN has undertaken an international study of possible future circular colliders beyond the LHC. The study considers several options for very high-energy hadron-hadron, electron-positron and hadron-electron colliders. From the cryogenics point of view, the most challenging option is the hadron-hadron collider (FCC-hh) for which the conceptual design of the cryogenic system is progressing. The FCC-hh cryogenic system will have to produce up to 120 kW at 1.8 K for the superconducting magnet cooling, 6 MW between 40 and 60 K for the beam-screen and thermal-shield cooling as well as 850 g/s between 40 and 290 K for the HTS current-lead cooling. The corresponding total entropic load represents about 1 MW equivalent at 4.5 K and this cryogenic system will be by far the largest ever designed. In addition, the total mass to be cooled down is about 250’000 t and an innovative cool-down process must be proposed. This paper will present the proposed cryogenic layout and architecture, the cooling principles of the main components, the corresponding cooling schemes, as well as the cryogenic plant arrangement and proposed process cycles. The corresponding required development plan for such challenging cryogenic system will be highlighted.

  10. Conceptual Approaches to the Development of Economic Systems in the Context of Globalization and Regionalization

    D. I.

    2017-12-01

    Full Text Available Interactions of the national and the global in economic transformations occurring in open economic systems are substantiated. Conceptual approaches to the development of economic systems in the globalization and regionalization context are summed up. It is shown that globalization is a logical consequence of mutual influences and interactions of multiple local transformations in socio-economic systems of various levels, which planetary self-organization generates the new quality of the global economic development. It is concluded that globalization has controversial impact on the transformation capacities of national economic systems that have to operate in the unfavorable condition of the growing instability of the global economic system and rapid integration in the structures with already established economic relations. The heuristic and experimental nature of economic and institutional transformations in these countries is added by splits of national economic systems and disruptions of established production links; the outstripping liberalization of foreign economic relations, creating rather external than internal pressures on national manufacturers and making them less capable to adapt to the competitive environment; the accelerated liberalization of monetary and financial systems, opening up ways to reallocation of capital from the sluggish real sector to the more flexible sector of transactions with currencies and securities; the shrinking regulatory authorities of national governments with respect of trade, competition, tax policies or social welfare; the growing domination of TNC and outflow of productive resources from national economies, important for their self-development, thus making their economic systems structurally primitive; the sharp property differentiation within societies and the increasing shares of population with low incomes.

  11. [Development of a Conceptual Framework for the Assessment of Chronic Care in the Spanish National Health System].

    Espallargues, Mireia; Serra-Sutton, Vicky; Solans-Domènech, Maite; Torrente, Elena; Moharra, Montse; Benítez, Dolors; Robles, Noemí; Domíngo, Laia; Escarrabill Sanglas, Joan

    2016-07-07

    The aim was to develop a conceptual framework for the assessment of new healthcare initiatives on chronic diseases within the Spanish National Health System. A comprehensive literature review between 2002 and 2013, including systematic reviews, meta-analysis, and reports with evaluation frameworks and/or assessment of initiatives was carried out; integrated care initiatives established in Catalonia were studied and described; and semistructured interviews with key stakeholders were performed. The scope and conceptual framework were defined by using the brainstorming approach.Of 910 abstracts identified, a total of 116 studies were included. They referred to several conceptual frameworks and/or assessment indicators at a national and international level. An overall of 24 established chronic care initiatives were identified (9 integrated care initiatives); 10 in-depth interviews were carried out. The proposed conceptual framework envisages: 1)the target population according to complexity levels; 2)an evaluation approach of the structure, processes, and outcomes considering the health status achieved, the recovery process and the maintenance of health; and 3)the dimensions or attributes to be assessed. The proposed conceptual framework will be helpful has been useful to develop indicators and implement them with a community-based and result-oriented approach and a territorial or population-based perspective within the Spanish Health System. This will be essential to know which are the most effective strategies, what are the key elements that determine greater success and what are the groups of patients who can most benefit.

  12. CONCEPTUAL APPROACHES TO STUDY THE INNOVATIVE DEVELOPMENT OF REGIONAL SOCIO-ECONOMIC SYSTEMS

    Svitlana Fedulova

    2017-12-01

    Full Text Available The purpose of the paper is to find out and identify conceptual approaches to the study of the innovative development of regional socio-economic systems to take into account global requirements for global water security. Methodology. We used in our study traditional and special methods, including: historical and logical method, abstraction and analogy, and system analysis methods. Results. The article deals with the problems of innovative development of regional socio-economic systems. Conceptual approaches to the study of the innovative development of these systems are determined. Theoretical approaches to regionalization are generalized and the regional typology in world regionalism is presented. The study devotes a sufficient attention to the issues of infrastructure support for regional systems, which is a prerequisite for the functioning and development of such systems. The article focuses on the priority of research of such a component of regional infrastructure as engineering and technical infrastructure. The model of regulation of development of regional socio-economic systems on the basis of infrastructure support with the consideration of world requirements of global water security is offered. Practical implications. In recent times, the discussion on the definition of the essence of the concept of “region” is rather lively. The new paradigm of the regional economy represents the region as a variety of spatial systems of various scales. Yes, there are ongoing discussions that under the region can be understood as a group of states and small-sized administrative-territorial units. Despite the important role played by such regional systems in the economy of many countries, this topic in domestic studies is not given with enough attention. Also, in the domestic scientific schools of the regional economy, studies devoted to the problems of patterns and tendencies of the formation and development of regional systems of Ukraine, the

  13. The 25 kWe solar thermal Stirling hydraulic engine system: Conceptual design

    White, Maurice; Emigh, Grant; Noble, Jack; Riggle, Peter; Sorenson, Torvald

    1988-01-01

    The conceptual design and analysis of a solar thermal free-piston Stirling hydraulic engine system designed to deliver 25 kWe when coupled to a 11 meter test bed concentrator is documented. A manufacturing cost assessment for 10,000 units per year was made. The design meets all program objectives including a 60,000 hr design life, dynamic balancing, fully automated control, more than 33.3 percent overall system efficiency, properly conditioned power, maximum utilization of annualized insolation, and projected production costs. The system incorporates a simple, rugged, reliable pool boiler reflux heat pipe to transfer heat from the solar receiver to the Stirling engine. The free-piston engine produces high pressure hydraulic flow which powers a commercial hydraulic motor that, in turn, drives a commercial rotary induction generator. The Stirling hydraulic engine uses hermetic bellows seals to separate helium working gas from hydraulic fluid which provides hydrodynamic lubrication to all moving parts. Maximum utilization of highly refined, field proven commercial components for electric power generation minimizes development cost and risk.

  14. Stirling engine electric hybrid vehicle propulsion system conceptual design study. Final report

    Dochat, G; Artiles, A; Killough, J; Ray, A; Chen, H S

    1978-08-01

    Results of a six-month study to characterize a series Stirling engine electric hybrid vehicle propulsion system are presented. The Stirling engine was selected as the heat conversion element to exploit the high efficiency (> .36), low pollution, multi-fuel and quiet operation of this machine. A free-piston Stirling engine driving a linear alternator in a hermatically sealed enclosure was chosen to gain the reliability, long life, and maintenance free characteristics of a sealed unit. The study performs trade off evaluations, selection of engine, battery, motor and inverter size, optimization of components, and develops a conceptual design and characterization of the total propulsion system. The conclusion of the study is that a Stirling engine electric hybrid propulsion system can be used successfully to augment the battery storage of a passenger vehicle and will result in significant savings of petroleum energy over present passenger vehicles. The performance and range augmentation of the hybrid design results in significant improvements over an all electric vehicle. The hybrid will be capable of performing 99% of the passenger vehicle annual trip distribution requirements with extremely low fuel usage. (TFD)

  15. Conceptual design of free-piston Stirling conversion system for solar power units

    Loktionov, Iu. V.

    A conversion system has been conceptually designed for solar power units of the dish-Stirling type. The main design objectives were to demonstrate the possibility of attaining such performance characteristics as low manufacturing and life cycle costs, high reliability, long life, high efficiency, power output stability, self-balance, automatic (or self-) start-up, and easy maintenance. The system design includes a heat transfer and utilization subsystem with a solar receiver, a free-piston engine, an electric power generation subsystem, and a control subsystem. The working fluid is helium. The structural material is stainless steel for hot elements, aluminum alloys and plastics for others. The electric generation subunit can be fabricated in three options: with an induction linear alternator, with a permanent magnet linear alternator, and with a serial rotated induction generator and a hydraulic drive subsystem. The heat transfer system is based on heat pipes or the reflux boiler principle. Several models of heat transfer units using a liquid metal (Na or Na-K) have been created and demonstrated.

  16. Star Tracker Based ATP System Conceptual Design and Pointing Accuracy Estimation

    Orfiz, Gerardo G.; Lee, Shinhak

    2006-01-01

    A star tracker based beaconless (a.k.a. non-cooperative beacon) acquisition, tracking and pointing concept for precisely pointing an optical communication beam is presented as an innovative approach to extend the range of high bandwidth (> 100 Mbps) deep space optical communication links throughout the solar system and to remove the need for a ground based high power laser as a beacon source. The basic approach for executing the ATP functions involves the use of stars as the reference sources from which the attitude knowledge is obtained and combined with high bandwidth gyroscopes for propagating the pointing knowledge to the beam pointing mechanism. Details of the conceptual design are presented including selection of an orthogonal telescope configuration and the introduction of an optical metering scheme to reduce misalignment error. Also, estimates are presented that demonstrate that aiming of the communications beam to the Earth based receive terminal can be achieved with a total system pointing accuracy of better than 850 nanoradians (3 sigma) from anywhere in the solar system.

  17. Conceptual design main progress of EAST Articulated Maintenance Arm (EAMA) system

    Shi, Shanshuang, E-mail: shiss@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Laboratory of Intelligent Machines, Lappeenranta University of Technology (Finland); Song, Yuntao; Cheng, Yong [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Villedieu, Eric; Bruno, Vincent [CEA-IRFM, F-13108 Saint-Paul-Lez-Durance (France); Feng, Hansheng [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Wu, Huapeng [Laboratory of Intelligent Machines, Lappeenranta University of Technology (Finland); Wang, Peng [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Hao, Zhiwei; Li, Yang; Wang, Kun; Pan, Hongtao [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

    2016-03-15

    Highlights: • EAST Articulated Maintenance Arm (EAMA) system is being collaboratively developed by ASIPP and CEA-IRFM. • Conceptual design for a 3-DOF wrist end effector with gripper has been finished. • Kinematic design can reach 90% of the workspace inside EAST tokamak vessel. • A prototype of EAMA arm segment has been built to validate the design. - Abstract: EAST articulated maintenance arm (EAMA) system is being collaboratively developed by ASIPP and CEA-IRFM for the purpose of remote inspection and simple maintenance operations in EAST vacuum vessel during physical experiments without breaking the ultra-high vacuum condition. The EAMA system design is based on a similar articulated inspection arm robot successfully demonstrated in Tore Supra in 2008. In order to better meet EAST configurations and maintenance requirements, optimized mechanisms and dimensions are considered for EAMA robot as upgrades. Besides, the segmented arm is equipped with a 3-DOF wrist end effector and gripper for gripping operation as well as inspection. Some calculations and simulations on statics, kinematics and workspace of EAMA have been presented to validate the feasibility. This paper introduces the overall design of the EAMA robot and presents implementation progress.

  18. Development of intelligent code system to support conceptual design of nuclear reactor core

    Kugo, Teruhiko; Nakagawa, Masayuki; Tsuchihashi, Keichiro

    1997-01-01

    An intelligent reactor design system IRDS has been developed to support conceptual design of new type reactor cores in the fields of neutronics, thermal-hydraulics and fuel behavior. The features of IRDS are summarized as follows: 1) a variety of computer codes to cover various design tasks relevant to 'static' and 'burnup' problems are implemented, 2) all the information necessary to the codes implemented is unified in a data base, 3) several data and knowledge bases are referred to in order to proceed design process efficiently for non-expert users, 4) advanced man-machine interface to communicate with the system through an interactive and graphical user interface is equipped and 5) a function to search automatically a design window, which is defined as a feasible parameter range to satisfy design requirement and criteria is employed to support the optimization or satisfication process. Applicability and productivity of the system are demonstrated by the design study of fuel pin for new type FBR cores. (author)

  19. Conceptual design of hydrogen isotopes chromatographic separation system with super large capacity

    Xie Bo; Weng Kuiping; Liu Yunnu; Hou Jianping

    2012-01-01

    A super large capacity hydrogen isotopes separation system, including total plan, unit (including making and purification of gas, three-grade chromatographic columns, gas loop and auto-control, and carrier recovery) and experimental scheme, had been designed on the basis of a series of hydrogen-deuterium experiments by temperature programmed de- sorption. The characteristic of the system was that desorption kinetic parameters could be directly calculated from the hydrogen isotope separation desorption spectra information. In other words, the complicated dynamic process of separation could be described by the desorption rate equation, shape parameter and desorption activation energy calculation on the condition of the experimental data and appropriate assumptions (equilibrium and adsorption, uniform surface). In previous work, an experimental series of operation to verify the successive enrichment of D 2 from a H 2 -D 2 mixture, the production of the deuterium from natural hydrogen and the recovery of tritium such as from the nuclear heavy-water were carried out using MS5A at 77 K. This work was only conceptual design, so it was necessary to identify the availability of super large capacity system by experiment. (authors)

  20. Conceptual design main progress of EAST Articulated Maintenance Arm (EAMA) system

    Shi, Shanshuang; Song, Yuntao; Cheng, Yong; Villedieu, Eric; Bruno, Vincent; Feng, Hansheng; Wu, Huapeng; Wang, Peng; Hao, Zhiwei; Li, Yang; Wang, Kun; Pan, Hongtao

    2016-01-01

    Highlights: • EAST Articulated Maintenance Arm (EAMA) system is being collaboratively developed by ASIPP and CEA-IRFM. • Conceptual design for a 3-DOF wrist end effector with gripper has been finished. • Kinematic design can reach 90% of the workspace inside EAST tokamak vessel. • A prototype of EAMA arm segment has been built to validate the design. - Abstract: EAST articulated maintenance arm (EAMA) system is being collaboratively developed by ASIPP and CEA-IRFM for the purpose of remote inspection and simple maintenance operations in EAST vacuum vessel during physical experiments without breaking the ultra-high vacuum condition. The EAMA system design is based on a similar articulated inspection arm robot successfully demonstrated in Tore Supra in 2008. In order to better meet EAST configurations and maintenance requirements, optimized mechanisms and dimensions are considered for EAMA robot as upgrades. Besides, the segmented arm is equipped with a 3-DOF wrist end effector and gripper for gripping operation as well as inspection. Some calculations and simulations on statics, kinematics and workspace of EAMA have been presented to validate the feasibility. This paper introduces the overall design of the EAMA robot and presents implementation progress.

  1. Conceptual Software Reliability Prediction Models for Nuclear Power Plant Safety Systems

    Johnson, G.; Lawrence, D.; Yu, H.

    2000-01-01

    The objective of this project is to develop a method to predict the potential reliability of software to be used in a digital system instrumentation and control system. The reliability prediction is to make use of existing measures of software reliability such as those described in IEEE Std 982 and 982.2. This prediction must be of sufficient accuracy to provide a value for uncertainty that could be used in a nuclear power plant probabilistic risk assessment (PRA). For the purposes of the project, reliability was defined to be the probability that the digital system will successfully perform its intended safety function (for the distribution of conditions under which it is expected to respond) upon demand with no unintended functions that might affect system safety. The ultimate objective is to use the identified measures to develop a method for predicting the potential quantitative reliability of a digital system. The reliability prediction models proposed in this report are conceptual in nature. That is, possible prediction techniques are proposed and trial models are built, but in order to become a useful tool for predicting reliability, the models must be tested, modified according to the results, and validated. Using methods outlined by this project, models could be constructed to develop reliability estimates for elements of software systems. This would require careful review and refinement of the models, development of model parameters from actual experience data or expert elicitation, and careful validation. By combining these reliability estimates (generated from the validated models for the constituent parts) in structural software models, the reliability of the software system could then be predicted. Modeling digital system reliability will also require that methods be developed for combining reliability estimates for hardware and software. System structural models must also be developed in order to predict system reliability based upon the reliability

  2. From the conceptual design to the first simulation of the new WEST plasma control system

    Nouailletas, R., E-mail: remy.nouailletas@cea.fr [IRFM, CEA, F-13108 Saint Paul lez Durance (France); Ravenel, N.; Signoret, J. [IRFM, CEA, F-13108 Saint Paul lez Durance (France); Treutterer, W. [Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching (Germany); Spring, A.; Lewerentz, M. [Max Planck Institute for Plasma Physics, Wendeksteinstr. 1, 17491 Greifswald (Germany); Rapson, C.J. [Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching (Germany); Masand, H.; Dhongde, J. [Institute for Plasma Research (IPR), Near Indira Bridge, Bhat, Gandhinagar 382 428, Gujarat (India); Moreau, P.; Guillerminet, B.; Brémond, S.; Allegretti, L. [IRFM, CEA, F-13108 Saint Paul lez Durance (France); Raupp, G. [Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching (Germany); Werner, A. [Max Planck Institute for Plasma Physics, Wendeksteinstr. 1, 17491 Greifswald (Germany); Saint Laurent, F.; Nardon, E. [IRFM, CEA, F-13108 Saint Paul lez Durance (France); Bhandarkar, M. [Institute for Plasma Research (IPR), Near Indira Bridge, Bhat, Gandhinagar 382 428, Gujarat (India)

    2015-10-15

    Highlights: • We propose an overview of the future control system of the Tore Supra in WEST configuration. • The control system will be based on DCS (Discharge Control System) of ASDEX Upgrade. • The Pulse Schedule Editor will be based on the experiment program editor of the future W7X facility. • The operation of this new system is illustrated by an example based on a simple plasma current/loop voltage control. - Abstract: The configuration of the Tore Supra WEST project leads to control challenges and event handling close to those of ITER from a plasma scenario point of view (X-point configuration, H mode, long duration pulse) and from a machine protection point of view (metallic environment). Based on previous conceptual studies and to meet the WEST requirements, a sub-project will implement a new plasma control system (PCS) and a new pulse schedule editor (PSE). The main idea is to use a segment approach to describe the pulse scheduling with a full integration of event handling both on the PCS and on the PSE. After detailed specification work, it has been shown that the real-time framework called DCS (Discharge Control System) which is currently used on ASDEX upgrade fulfills the requirements and could be integrated into the WEST global control infrastructure. For the PSE, the Xedit tool, developed for the future W7X facility, has been chosen. This contribution will begin by a short explanation of the concepts proposed for the control of the plasma and the handling of events during the plasma discharge. Then it will focus on the new centralized architecture of the new Tore Supra PCS and an operating principle example showing the efficiency of the approach to handle normal and off-normal events. This later point will illustrate the required modifications of DCS and Xedit to fit with the Tore Supra Control infrastructure.

  3. Coulombic Interaction in Finnish Middle School Chemistry: A Systemic Perspective on Students' Conceptual Structure of Chemical Bonding

    Joki, Jarkko; Lavonen, Jari; Juuti, Kalle; Aksela, Maija

    2015-01-01

    The aim of this study was to design a novel and holistic way to teach chemical bonding at the middle school level according to research on the teaching and learning of bonding. A further aim was to investigate high achieving middle school students' conceptual structures concerning chemical bonding by using a systemic perspective. Students in one…

  4. Conceptual design for the breakwater system of the south of Doson naval base : Optimisation versus deterministic design

    Viet, N.D.; Verhagen, H.J.; Van Gelder, P.H.A.J.M.; Vrijling, J.K.

    2008-01-01

    In 2006 a Vietnamese Engineering Consultancy Company carried out a design study of a Naval Base at the location of the South of Doson Peninsula in Vietnam. A deterministic approach applied to the conceptual design of the breakwater system of the Naval Base resulted in a cross-section with a big

  5. Teaching Case: IS Security Requirements Identification from Conceptual Models in Systems Analysis and Design: The Fun & Fitness, Inc. Case

    Spears, Janine L.; Parrish, James L., Jr.

    2013-01-01

    This teaching case introduces students to a relatively simple approach to identifying and documenting security requirements within conceptual models that are commonly taught in systems analysis and design courses. An introduction to information security is provided, followed by a classroom example of a fictitious company, "Fun &…

  6. Visual Representations of Microcosm in Textbooks of Chemistry: Constructing a Systemic Network for Their Main Conceptual Framework

    Papageorgiou, George; Amariotakis, Vasilios; Spiliotopoulou, Vasiliki

    2017-01-01

    The main objective of this work is to analyse the visual representations (VRs) of the microcosm depicted in nine Greek secondary chemistry school textbooks of the last three decades in order to construct a systemic network for their main conceptual framework and to evaluate the contribution of each one of the resulting categories to the network.…

  7. Conceptual design of a bioregenerative life support system containing crops and silkworms

    Hu, Enzhu; Bartsev, Sergey I.; Liu, Hong

    2010-04-01

    This article summarizes a conceptual design of a bioregenerative life support system for permanent lunar base or planetary exploration. The system consists of seven compartments - higher plants cultivation, animal rearing, human habitation, water recovery, waste treatment, atmosphere management, and storages. Fifteen kinds of crops, such as wheat, rice, soybean, lettuce, and mulberry, were selected as main life support contributors to provide the crew with air, water, and vegetable food. Silkworms fed by crop leaves were designated to produce partial animal nutrition for the crew. Various physical-chemical and biological methods were combined to reclaim wastewater and solid waste. Condensate collected from atmosphere was recycled into potable water through granular activated carbon adsorption, iodine sterilization, and trace element supplementation. All grey water was also purified though multifiltration and ultraviolet sterilization. Plant residue, human excrement, silkworm feces, etc. were decomposed into inorganic substances which were finally absorbed by higher plants. Some meat, ingredients, as well as nitrogen fertilizer were prestored and resupplied periodically. Meanwhile, the same amount and chemical composition of organic waste was dumped to maintain the steady state of the system. A nutritional balanced diet was developed by means of the linear programming method. It could provide 2721 kcal of energy, 375.5 g of carbohydrate, 99.47 g of protein, and 91.19 g of fat per capita per day. Silkworm powder covered 12.54% of total animal protein intakes. The balance of material flows between compartments was described by the system of stoichiometric equations. Basic life support requirements for crews including oxygen, food, potable and hygiene water summed up to 29.68 kg per capita per day. The coefficient of system material closure reached 99.40%.

  8. Advanced turbine systems program conceptual design and product development. Annual report, August 1993--July 1994

    NONE

    1994-11-01

    This Yearly Technical Progress Report covers the period August 3, 1993 through July 31, 1994 for Phase 2 of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE Contract No. DE-AC421-93MC30246. As allowed by the Contract (Part 3, Section J, Attachment B) this report is also intended to fulfill the requirements for a fourth quarterly report. The objective of Phase 2 of the ATS Program is to provide the conceptual design and product development plan for an ultra-high efficiency, environmentally superior and cost-competitive industrial gas turbine system to be commercialized in the year 2000. During the period covered by this report, Solar has completed three of eight program tasks and has submitted topical reports. These three tasks included a Project Plan submission of information required by NEPA, and the selection of a Gas-Fueled Advanced Turbine System (GFATS). In the latest of the three tasks, Solar`s Engineering team identified an intercooled and recuperated (ICR) gas turbine as the eventual outcome of DOE`s ATS program coupled with Solar`s internal New Product Introduction (NPI) program. This machine, designated ``ATS50`` will operate at a thermal efficiency (turbine shaft power/fuel LHV) of 50 percent, will emit less than 10 parts per million of NOx and will reduce the cost of electricity by 10 percent. It will also demonstrate levels of reliability, availability, maintainability, and durability (RAMD) equal to or better than those of today`s gas turbine systems. Current activity is concentrated in three of the remaining five tasks a Market Study, GFATS System Definition and Analysis, and the Design and Test of Critical Components.

  9. Conceptual design finalisation of the ITER In-Vessel Viewing and Metrology System (IVVS)

    Dubus, Gregory, E-mail: gregory.dubus@f4e.europa.eu [Fusion for Energy, c/ Josep Pla, n°2 - Torres Diagonal Litoral - Edificio B3, 08019 Barcelona (Spain); Puiu, Adrian; Damiani, Carlo; Van Uffelen, Marco; Lo Bue, Alessandro; Izquierdo, Jesus; Semeraro, Luigi [Fusion for Energy, c/ Josep Pla, n°2 - Torres Diagonal Litoral - Edificio B3, 08019 Barcelona (Spain); Martins, Jean-Pierre; Palmer, Jim [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2013-10-15

    The In-Vessel Viewing and Metrology System (IVVS) is a fundamental tool for the ITER machine operations, aiming at performing inspections as well as providing information related to the erosion of in-vessel components. Periodically or on request, the IVVS probes will be deployed into the Vacuum Vessel from their storage positions (still within the ITER primary confinement) in order to perform both viewing and metrology on plasma facing components (blanket, divertor, heating/diagnostic plugs, test blanket modules) and, more generically, to provide information on the status of the in-vessel components. In 2011, the IO proposed to simplify and strengthen the six IVVS port extensions situated at the divertor level. Among other important consequences, such as the relocation of the Glow Discharge Cleaning (GDC) electrodes at other levels of the machine, this major design change implied the need for a substantial redesign of the IVVS plug, which took part to an on-going effort to bring the integrated IVVS concept – including the scanning probe and its deployment system – to the level of maturity suitable for the Conceptual Design Review. This paper gives an overview of the various design and R and D activities in progress: plug design integration, probe concept validation under environmental conditions, development of a metrology strategy, the whole supported by a nuclear analysis.

  10. Conceptual design of technical security systems for Russian nuclear facilities physical protection

    Izmailov, A.V.

    1995-01-01

    Conceptual design of technical security systems (TSS) used in the early stages of physical protection systems (PPS) design for Russia nuclear facilities is discussed. The importance of work carried out in the early stages was noted since the main design solutions are being made within this period (i.e. selection of a structure of TSS and its components). The methods of analysis and synthesis of TSS developed by ''Eleron'' (MINATOM of Russia) which take into account the specific conditions of Russian nuclear facilities and a scope of equipment available are described in the review. TSS effectiveness assessment is based on a probability theory and a simulation. The design procedure provides for a purposeful choice of TSS competitive options including a ''cost-benefit'' criterion and taking into account a prechosen list of design basis threats to be used for a particular facility. The attention is paid to a practical aspect of the methods application as well as to the bilateral Russian-American scientific and technical co-operation in the PPS design field

  11. ITER fast ion collective Thomson scattering, conceptual design of 60 GHz system

    Meo, F.; Bindslev, H.; Korsholm, S.B.

    2007-08-01

    The collective Thomson scattering diagnostic for ITER at the 60 GHz range is capable of measuring the fast ion distribution parallel and perpendicular to the magnetic field at different radial locations simultaneously. The design is robust technologically with no moveable components near the plasma. The fast ion CTS diagnostic consists of two separate systems. Each system has its own RF launcher and separate set of detectors. The first system measures the perpendicular component of the fast ion velocity distribution. It consists of radially directed RF launcher and receiver, both located in the equatorial port on the low field side (LFS). This system will be referred to by the acronym LFS-BS system referring to the location of the receiver and the fact that it measures backscattered radiation. The second part of the CTS diagnostic measures the parallel component of the fast ion distribution. It consists of an RF launcher located in the mid-plane port on the LFS and a receiver mounted on the inner vacuum vessel wall that views the plasma from between two blanket modules. This system will be referred to as HFS-FS referring to the location of the receivers and that they measure forward scattered radiation. The design of both LFS-BS and HFS-FS receivers is aimed at measuring at different spatial locations simultaneously with no moveable components near the plasma. This report is a preliminary study of the hardware design and engineering constraints for this frequency range. Section 2 conceptually describes the two systems and their main components. Section 3 clarifies the impact of design parameters such as beam widths and scattering angle on the CTS measurements. With this in hand, the ITER measurement requirements are translated into constraints on the CTS system designs. An important result in this section is that systems can be designed inside these constraints. Section 4 outlines the technical feasibility and describes in more detail the design and the engineering

  12. Medical tourism and policy implications for health systems: a conceptual framework from a comparative study of Thailand, Singapore and Malaysia

    Pocock, Nicola S; Phua, Kai Hong

    2011-01-01

    Abstract Medical tourism is a growing phenomenon with policy implications for health systems, particularly of destination countries. Private actors and governments in Southeast Asia are promoting the medical tourist industry, but the potential impact on health systems, particularly in terms of equity in access and availability for local consumers, is unclear. This article presents a conceptual framework that outlines the policy implications of medical tourism's growth for health systems, draw...

  13. Conceptual modular description of the high-level waste management system for system studies model development

    McKee, R.W.; Young, J.R.; Konzek, G.J.

    1992-08-01

    This document presents modular descriptions of possible alternative components of the federal high-level radioactive waste management system and the procedures for combining these modules to obtain descriptions for alternative configurations of that system. The 20 separate system component modules presented here can be combined to obtain a description of any of the 17 alternative system configurations (i.e., scenarios) that were evaluated in the MRS Systems Studies program (DOE 1989a). First-approximation descriptions of other yet-undefined system configurations could also be developed for system study purposes from this database. The descriptions include, in a modular format, both functional descriptions of the processes in the waste management system, plus physical descriptions of the equipment and facilities necessary for performance of those functions

  14. Effective Consultants: A Conceptual Framework for Helping School Systems Achieve Systemic Reform

    Hazle Bussey, Leslie; Welch, Jennie C.; Mohammed, Meca B.

    2014-01-01

    A growing number of organisations--universities, non-profits, independent consultants--are emerging as partners to school systems pursuing systemic improvement. This proliferation invites questions probing the interaction between school systems and their consulting partners. Drawing on a cross-disciplinary review of literature, this theoretical…

  15. Conceptual modeling in systems biology fosters empirical findings: the mRNA lifecycle.

    Dov Dori

    Full Text Available One of the main obstacles to understanding complex biological systems is the extent and rapid evolution of information, way beyond the capacity individuals to manage and comprehend. Current modeling approaches and tools lack adequate capacity to model concurrently structure and behavior of biological systems. Here we propose Object-Process Methodology (OPM, a holistic conceptual modeling paradigm, as a means to model both diagrammatically and textually biological systems formally and intuitively at any desired number of levels of detail. OPM combines objects, e.g., proteins, and processes, e.g., transcription, in a way that is simple and easily comprehensible to researchers and scholars. As a case in point, we modeled the yeast mRNA lifecycle. The mRNA lifecycle involves mRNA synthesis in the nucleus, mRNA transport to the cytoplasm, and its subsequent translation and degradation therein. Recent studies have identified specific cytoplasmic foci, termed processing bodies that contain large complexes of mRNAs and decay factors. Our OPM model of this cellular subsystem, presented here, led to the discovery of a new constituent of these complexes, the translation termination factor eRF3. Association of eRF3 with processing bodies is observed after a long-term starvation period. We suggest that OPM can eventually serve as a comprehensive evolvable model of the entire living cell system. The model would serve as a research and communication platform, highlighting unknown and uncertain aspects that can be addressed empirically and updated consequently while maintaining consistency.

  16. Design requirements for SRB production control system. Volume 2: System requirements and conceptual description

    1981-01-01

    In the development of the business system for the SRB automated production control system, special attention had to be paid to the unique environment posed by the space shuttle. The issues posed by this environment, and the means by which they were addressed, are reviewed. The change in management philosphy which will be required as NASA switches from one-of-a-kind launches to multiple launches is discussed. The implications of the assembly process on the business system are described. These issues include multiple missions, multiple locations and facilities, maintenance and refurbishment, multiple sources, and multiple contractors. The implications of these aspects on the automated production control system are reviewed including an assessment of the six major subsystems, as well as four other subsystem. Some general system requirements which flow through the entire business system are described.

  17. Relationships between Conceptual Knowledge and Reasoning about Systems: Implications for Fostering Systems Thinking in Secondary Science

    Lyons, Cheryl

    2014-01-01

    Reasoning about systems is necessary for understanding many modern issues that face society and is important for future scientists and all citizens. Systems thinking may allow students to make connections and identify common themes between seemingly different situations and phenomena, and is relevant to the focus on cross-cutting concepts in…

  18. Conceptualizing the use of system products and system deliveries in the building industry

    Hvam, Lars; Mortensen, Niels Henrik; Thuesen, Christian

    2013-01-01

    on the product architecture and partly of the setup of the business processes by using e.g. Configure to Order processes and Engineer to Order processes. Furthermore the potential impacts from using system products and system deliveries are discussed based on the examples included....

  19. Conceptual basis of a systems prioritization methodology for the Waste Isolation Pilot Plant

    Helton, J.C.; Beyeler, W.; Hora, S.C.

    1997-01-01

    A systems prioritization methodology (SPM) is under development at Sandia National Laboratories (SNL) to provide guidance to the US Department of Energy (DOE) on experimental programs and design modifications to be supported in the development of a successful compliance certification application to the US Environmental Protection Agency (EPA) for the Waste Isolation Pilot Plant (WIPP) for the geologic disposal of transuranic (TRU) waste. The purpose of the SPM is to determine the probabilities that the implementation of different combinations of experimental programs and design modifications, referred to as activity sets, will lead to compliance with 40 CFR 191, Subparts B and C (Environmental Radiation Protection Standards for the Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Waste) and 40 CFR 268·6 (Petitions to Allow Land Disposal of a Waste Prohibited under Subpart C of Part 268, which implements the Resource Conservation and Recovery Act, i.e., RCRA). Appropriate tradeoffs between compliance probability, implementation cost and implementation time can then be made in the selection of the activity set to be supported in the development of a licensing application. Determination of compliance probabilities for individual activity sets involves probability spaces for (1) possible outcomes of the experimental programs, (2) uncertainty in analysis input given specific experimental outcomes and (3) possible future occurrences at the WIPP, and also models for (1) fluid flow in the vicinity of the repository, (2) radionuclide release from the repository due to flowing groundwater, (3) groundwater flow and radionuclide transport in geologic formations overlying the repository, (4) radionuclide release to the surface environment due to cuttings and spallings removal in the event of a drilling intrusion and (5) transport of RCRA contaminants in gas and brine. Descriptions are given for the conceptual structure of the SPM and the manner in

  20. Conceptual design of a system to help the elaboration of healthcare waste management plans

    Reis, Sergio C. dos; Silva, Eliane M.P. da; Vasconcelos, Vanderley de; Cussiol, Noil A.M.; Bahia, Jean V.

    2007-01-01

    Nowadays the daily amount of wastes generated in the world is enormous. There are several categories of wastes with specific characteristics, some of them hazardous. These features, when associated with not properly waste disposal can put at risk both life quality and natural resources of present-day as well as future generations. From 10% to 25% of the wastes generated by health care facilities require special handling care due to their physical, biological, chemical, or radiological characteristics. This requires, among other things, the implementation of specific measures for their environmentally safe management. These measures shall be provided in a formal document, named Health care Waste Management Plan, which shall be written by all health care providers. In Brazil, general guides for elaboration of these documents are well defined by regulatory bodies and technical advices. At federal level, these directives are given by the following organizations: National Health Surveillance Agency - ANVISA, National Council for the Environment - CONAMA, and Brazilian Nuclear Energy Commission - CNEN. At CDTN (Center of Nuclear Technology Development), as part of a doctoral thesis at State University of Campinas (UNICAMP), a methodology that systematizes the management of the several activities involved with hazardous and radioactive wastes was developed, in order to be used as a guidance tool for this task. The objective of this present work is to adapt this methodology to health care waste management and present a conceptual design of a semi-expert system to help the elaboration of Health care Waste Management Plans. (author)

  1. Conceptual design of a system to help the elaboration of healthcare waste management plans

    Reis, Sergio C. dos; Silva, Eliane M.P. da; Vasconcelos, Vanderley de; Cussiol, Noil A.M. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)]. E-mails: reissc@cdtn.br; silvaem@cdtn.br; vasconv@cdtn.br; cussiol@cdtn.br; Bahia, Jean V. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Quimica]. E-mail: jeanvb@cdtn.br; Jordao, Elizabete [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil)]. E-mail: bete@feq.unicamp.br

    2007-07-01

    Nowadays the daily amount of wastes generated in the world is enormous. There are several categories of wastes with specific characteristics, some of them hazardous. These features, when associated with not properly waste disposal can put at risk both life quality and natural resources of present-day as well as future generations. From 10% to 25% of the wastes generated by health care facilities require special handling care due to their physical, biological, chemical, or radiological characteristics. This requires, among other things, the implementation of specific measures for their environmentally safe management. These measures shall be provided in a formal document, named Health care Waste Management Plan, which shall be written by all health care providers. In Brazil, general guides for elaboration of these documents are well defined by regulatory bodies and technical advices. At federal level, these directives are given by the following organizations: National Health Surveillance Agency - ANVISA, National Council for the Environment - CONAMA, and Brazilian Nuclear Energy Commission - CNEN. At CDTN (Center of Nuclear Technology Development), as part of a doctoral thesis at State University of Campinas (UNICAMP), a methodology that systematizes the management of the several activities involved with hazardous and radioactive wastes was developed, in order to be used as a guidance tool for this task. The objective of this present work is to adapt this methodology to health care waste management and present a conceptual design of a semi-expert system to help the elaboration of Health care Waste Management Plans. (author)

  2. A collaborative computer auditing system under SOA-based conceptual model

    Cong, Qiushi; Huang, Zuoming; Hu, Jibing

    2013-03-01

    Some of the current challenges of computer auditing are the obstacles to retrieving, converting and translating data from different database schema. During the last few years, there are many data exchange standards under continuous development such as Extensible Business Reporting Language (XBRL). These XML document standards can be used for data exchange among companies, financial institutions, and audit firms. However, for many companies, it is still expensive and time-consuming to translate and provide XML messages with commercial application packages, because it is complicated and laborious to search and transform data from thousands of tables in the ERP databases. How to transfer transaction documents for supporting continuous auditing or real time auditing between audit firms and their client companies is a important topic. In this paper, a collaborative computer auditing system under SOA-based conceptual model is proposed. By utilizing the widely used XML document standards and existing data transformation applications developed by different companies and software venders, we can wrap these application as commercial web services that will be easy implemented under the forthcoming application environments: service-oriented architecture (SOA). Under the SOA environments, the multiagency mechanism will help the maturity and popularity of data assurance service over the Internet. By the wrapping of data transformation components with heterogeneous databases or platforms, it will create new component markets composed by many software vendors and assurance service companies to provide data assurance services for audit firms, regulators or third parties.

  3. A CONCEPTUAL SYSTEMS DYNAMICS MODEL OF RESEARCH AND DEVELOPMENT ACTIVITIES IN SOUTH AFRICA

    S.S. Grobbelaar

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Research and Development (R&D is one of the key sub-functions of a National System of Innovation (NSI. It is the primary point of entry for new scientific development and a key focus for industrial innovation. Recent trends show evidence of disinvestments and decay of South Africa’s R&D capacity. The problem investigated in this study is the delayed effect and influence R&D investment has on the system’s ability to produce R&D output. System Dynamics modelling is an excellent tool to assess a system’s ability to adjust to change and the impact of new decisions that have to be made. The conceptual design of a System Dynamics model of R&D activities is presented. The theoretical underpinning and main assumptions made in deriving and developing the model are also discussed.

    AFRIKAANSE OPSOMMING: Navorsing en Ontwikkeling (N&O is een van die sleutelsub-funksies van ‘n Nasionale Stelsel van Innovasie (NSI. Dit is die primêre toegangspunt vir nuwe wetenskaplike ontwikkeling en ‘n sleutelfokus vir industriële innovasie. Onlangse neigings lewer bewyse van disinvestering en agteruitgang in Suid-Afrika se N&Okapasiteit. Die probleem wat in hierdie studie ondersoek word, is die vertraagde effek en invloed wat N&O-investering op die stelsel se vermoë het om N&O-uitsette te lewer. Stelseldinamikamodellering is ‘n uitstekende gereedskapstuk om ‘n stelsel se vermoë om aan te pas by verandering te takseer en die impak van nuwe besluite wat geneem moet word te toets. Die konseptuele ontwerp van ‘n Stelseldinamikamodel van N&O-aktiwiteite word voorgehou. Die teoretiese onderbou en die hoofaannames wat gemaak is in die afleiding en ontwikkeling van die model word ook bespreek.

  4. Developing plan and pre-conceptual design of target system for JAERI`s high intensity neutron source

    Hino, Ryutaro; Kaminaga, Masanori; Haga, Katsuhiro; Ishikura, Syuichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Nakamura, Fumito; Uchida, Shoji

    1997-11-01

    This paper presents an outline of developing plan of a target system and topics obtained by a pre-conceptual design, which aims to establish a technology base of the target system and to make clear a system concept. In the plan, two types of target - solid and mercury targets - are to be developed for a neutron scattering facility. Information obtained through the development shall be applied to designs of an irradiation and a transmutation facilities. Through the pre-conceptual design, system arrangement, scale etc. were made clear: total weight will be 12000 ton, and 26 beam lines with beam shutters will be equipped for 4 moderators. Engineering problems were also made clear through the design; high flux heat removal, dynamic stress caused by thermal shock and pressure wave, loop technology for the mercury target and a slurry moderator consisting of methane pellets and liquefied hydrogen. We are now constructing new test apparatuses and arranging computer codes for solving these problems. (author)

  5. Conceptual PHES-system models of the Aysén watershed and fjord (Southern Chile): testing a brainstorming strategy.

    Marín, Víctor H; Delgado, Luisa E; Bachmann, Pamela

    2008-09-01

    The use of brainstorming techniques for the generation of conceptual models, as the basis for the integrated management of physical-ecological-social systems (PHES-systems) is tested and discussed. The methodology is applied in the analysis of the Aysén fjord and watershed (Southern Chilean Coast). Results show that the proposed methods can be adequately used in management scenarios characterized by highly hierarchical, experts/non-experts membership.

  6. Land Mobile Satellite Service (LMSS): A conceptual system design and identification of the critical technologies: Part 2: Technical report

    Naderi, F. (Editor)

    1982-01-01

    A conceptual system design for a satellite-aided land mobile service is described. A geostationary satellite which employs a large (55-m) UHF reflector to communicate with small inexpensive user antennas on mobile vehicles is discussed. It is shown that such a satellite system through multiple beam antennas and frequency reuse can provide thousands of radiotelephone and dispatch channels serving hundreds of thousands of users throughout the U.S.

  7. Conceptual design of advanced central receiver power systems sodium-cooled receiver concept. Volume 2, Book 1. Commercial plant conceptual design. Final report

    1979-03-01

    The conceptual design of the 100-MW solar tower focus commercial power plant is described in detail. Sodium is pumped up to the top of a tall tower where the receiver is located. The sodium is heated in the receiver and then flows down the tower, through a pressure reducing device, and thence into a large, hot storage tank which is located at ground level and whose size is made to meet a specific thermal energy storage capacity requirement. From this tank, the sodium is pumped by a separate pump, through a system of sodium-to-water steam generators. The steam generator system consists of a separate superheater and reheater operating in parallel and an evaporator unit operating in series with the other two units. The sodium flowing from the evaporator unit is piped to a cold storage tank. From the cold storage tank, sodium is then pumped up to the tip of the tower to complete the cycle. The steam generated in the steam generators is fed to a conventional off-the-shelf, high-efficiency turbine. The steam loop operates in a conventional rankine cycle with the steam generators serving the same purpose as a conventional boiler and water being fed to the evaporator with conventional feedwater pumps. The pressure reducing device (a standard drag valve, for example) serves to mitigate the pressure caused by the static head of sodium and thus allows the large tanks to operate at ambient pressure conditions. (WHK)

  8. Conceptual design of 30 MeV magnet system used for BNCT epithermal neutron source

    Slamet Santosa; Taufik

    2015-01-01

    Conceptual design of 30 MeV Magnet System Used for BNCT Epithermal Neutron Source has been done based on methods of empirical model of basic equation, experiences of 13 MeV cyclotron magnet design and personal communications. In the field of health, cyclotron can be used as an epithermal neutron source for Boron Neutron Capture Therapy (BNCT). The development of cyclotron producing epithermal neutrons for BNCT has been performed at Kyoto University, of which it produces a proton beam current of 1.1 mA with energy of 30 MeV. With some experiences on 13 MeV cyclotron magnet design, to support BNCT research and development we performed the design studies of 30 MeV cyclotron magnet system, which is one of the main components of the cyclotron for deflecting proton beam into circular trajectory and serves as beam focusing. Results of this study are expected to define the parameters of particular cyclotron magnet. The scope of this study includes the study of the parameters component of the 30 MeV cyclotron and magnet initial parameters. The empirical method of basic equation model is then corroborated by a simulation using Superfish software. Based on the results, a 30 MeV cyclotron magnet for BNCT neutron source enables to be realized with the parameters of B 0 = 1.06 T, frequency RF = 64.733938 ≈ 65 MHz, the external radius of 0.73 m, the radius of the polar = 0.85 m, BH = 1.95 T and a gap hill of 4 cm. Because proton beam current that be needed for BNCT application is very large, then in the calculation it is chosen a great focusing axial νz = 0.630361 which can generate B V = 0.44 T. (author)

  9. Combat Systems Vision 2030 Conceptual Design of Control Structures for Combat Systems

    1992-02-01

    IEEE, 68(6), pp. 644-654, 1980. 26. Singh , M. G.; Titli, A.; and Malinowski, K.; "Decentralized Control Design: An Overview," Large Scale Systems...IFAC Symposium, pp. 335-339, 1988. 40. Cameron, E. J.; Petschenik, N. H.; Ruston, Lillian; Shah, Swati ; and Srinidhi, Hassan, (Bell Communications

  10. Conceptual design of solid breeder blanket system cooled by supercritical water

    Enoeda, Mikio; Akiba, Masato [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Ohara, Yoshihiro [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment] [and others

    2001-12-01

    the energy conversion, on the other hand, it is the demerit to the structural limitation of the structural material of the FW which must remove the high surface heat flux from the plasma. To resolve this issue, the coolant path was selected to cool FWs of 4 modules first, and later the coolant was planned to cool the breeder region with higher temperature. From this flow path, the estimated highest temperature of the FW cooling is 360degC. By using this value, the thermo-mechanical performance was estimated to show the feasibility to the thermal stress and the internal coolant pressure. Also, TBR and thermal analysis was performed to search the acceptable dimensioning of the breeder layer and multiplier layer. As the result of the conceptual design, the basic feasibility was shown for such aspects as, heat removal, power generation, fuel production, neutron shielding and so on to the proposed DEMO blanket concept. Also, the other important issues such as, electro-magnetic performance and loads, corrosion of the supercritical water, tritium recovery system, power generation system, fabrication feasibility of the proposed blanket structure, remote handling system and so on, were preliminarily researched and identified as the issues to be clarified by R and D. (author)

  11. Conceptual design of solid breeder blanket system cooled by supercritical water

    Enoeda, Mikio; Akiba, Masato; Ohara, Yoshihiro

    2001-12-01

    conversion, on the other hand, it is the demerit to the structural limitation of the structural material of the FW which must remove the high surface heat flux from the plasma. To resolve this issue, the coolant path was selected to cool FWs of 4 modules first, and later the coolant was planned to cool the breeder region with higher temperature. From this flow path, the estimated highest temperature of the FW cooling is 360degC. By using this value, the thermo-mechanical performance was estimated to show the feasibility to the thermal stress and the internal coolant pressure. Also, TBR and thermal analysis was performed to search the acceptable dimensioning of the breeder layer and multiplier layer. As the result of the conceptual design, the basic feasibility was shown for such aspects as, heat removal, power generation, fuel production, neutron shielding and so on to the proposed DEMO blanket concept. Also, the other important issues such as, electro-magnetic performance and loads, corrosion of the supercritical water, tritium recovery system, power generation system, fabrication feasibility of the proposed blanket structure, remote handling system and so on, were preliminarily researched and identified as the issues to be clarified by R and D. (author)

  12. The conceptual basis of mathematics in cardiology III: linear systems theory and integral transforms.

    Bates, Jason H T; Sobel, Burton E

    2003-05-01

    This is the third in a series of four articles developed for the readers of Coronary Artery Disease. Without language ideas cannot be articulated. What may not be so immediately obvious is that they cannot be formulated either. One of the essential languages of cardiology is mathematics. Unfortunately, medical education does not emphasize, and in fact, often neglects empowering physicians to think mathematically. Reference to statistics, conditional probability, multicompartmental modeling, algebra, calculus and transforms is common but often without provision of genuine conceptual understanding. At the University of Vermont College of Medicine, Professor Bates developed a course designed to address these deficiencies. The course covered mathematical principles pertinent to clinical cardiovascular and pulmonary medicine and research. It focused on fundamental concepts to facilitate formulation and grasp of ideas.This series of four articles was developed to make the material available for a wider audience. The articles will be published sequentially in Coronary Artery Disease. Beginning with fundamental axioms and basic algebraic manipulations they address algebra, function and graph theory, real and complex numbers, calculus and differential equations, mathematical modeling, linear system theory and integral transforms and statistical theory. The principles and concepts they address provide the foundation needed for in-depth study of any of these topics. Perhaps of even more importance, they should empower cardiologists and cardiovascular researchers to utilize the language of mathematics in assessing the phenomena of immediate pertinence to diagnosis, pathophysiology and therapeutics. The presentations are interposed with queries (by Coronary Artery Disease abbreviated as CAD) simulating the nature of interactions that occurred during the course itself. Each article concludes with one or more examples illustrating application of the concepts covered to

  13. A conceptual study of the filtration equipment arrangement in CFVS system

    Kim, Hyun-Soo; Lee, Jong- Wook; Kim, Won-Seok

    2014-01-01

    Containment Filtered Venting System (CFVS) is installed in nuclear power plant to protect the integrity of containment against the over pressurization and removal of fission product which are aerosol, vapor and gaseous forms release from the fuel into the containment. CFVS has filtering process in two step. In step one, the multi-venturi scrubber for removing aerosol. The venting gas entering the venturi scrubber is injected into a pool of water via a small number of nozzles. Due to the large difference between the velocity of the scrubbing water droplet and gas velocity, aerosols are removed. So the maximum gas velocity of throat is to affect the performance is an important factor in the venturi scrubber. For this reason, composition of distribution pipe and location of scrubber is important, because read to a flow rate different in each venture scrubber. In step two, the metal filter combination additionally equipped with metal fibers and cyclone device. The gas exiting from the pool venturi section contains small amounts of penetrating aerosols as well as small scrubbing water droplets. In case that water droplet moves to metal filter unseparated, filtering performance is rapidly declined. Cyclone is used to prevent the water droplets on the metal filter, separating the droplet including radioactivity which is passed through scrubber by centrifugal force. Therefore separating droplet phase in cyclone is the important thing in aerosol filtering phases although radioactive is not separated. In this study, we found a conceptual design alternative for CFVS performance increasing by reviewing the optimal composition of cyclone and optimal design of distribution pipe with numerical analysis. Numerical analysis was performed with the relationship between the distributions of the flow to the nozzle arrangement in accordance with the size of the distribution pipes, so that the optimal performance of the scrubber can be installed in CFVS. As a result, a high filtration

  14. A conceptual study of the filtration equipment arrangement in CFVS system

    Kim, Hyun-Soo; Lee, Jong- Wook; Kim, Won-Seok [BHI, Changwon (Korea, Republic of)

    2014-10-15

    Containment Filtered Venting System (CFVS) is installed in nuclear power plant to protect the integrity of containment against the over pressurization and removal of fission product which are aerosol, vapor and gaseous forms release from the fuel into the containment. CFVS has filtering process in two step. In step one, the multi-venturi scrubber for removing aerosol. The venting gas entering the venturi scrubber is injected into a pool of water via a small number of nozzles. Due to the large difference between the velocity of the scrubbing water droplet and gas velocity, aerosols are removed. So the maximum gas velocity of throat is to affect the performance is an important factor in the venturi scrubber. For this reason, composition of distribution pipe and location of scrubber is important, because read to a flow rate different in each venture scrubber. In step two, the metal filter combination additionally equipped with metal fibers and cyclone device. The gas exiting from the pool venturi section contains small amounts of penetrating aerosols as well as small scrubbing water droplets. In case that water droplet moves to metal filter unseparated, filtering performance is rapidly declined. Cyclone is used to prevent the water droplets on the metal filter, separating the droplet including radioactivity which is passed through scrubber by centrifugal force. Therefore separating droplet phase in cyclone is the important thing in aerosol filtering phases although radioactive is not separated. In this study, we found a conceptual design alternative for CFVS performance increasing by reviewing the optimal composition of cyclone and optimal design of distribution pipe with numerical analysis. Numerical analysis was performed with the relationship between the distributions of the flow to the nozzle arrangement in accordance with the size of the distribution pipes, so that the optimal performance of the scrubber can be installed in CFVS. As a result, a high filtration

  15. Conceptual assessment and thermal hydraulic analysis of MVDS system for the dry storage of reduced metal fuel

    Lee, J. C.; Bang, K. S.; Shin, H. S.; Joo, J. S.; Su, K. S.; Kim, H. D.

    2003-01-01

    Conceptual assessment and thermal hydraulic analysis of MVDS storage system have been carried out for application of reduced metal fuel. The storage concept was established considering the optimum weight, storage volume and thermal efficiency. The capacity of MVDS system for loading the reduced metal fuel has four times as compared with existing PWR fuel storage system. In the results of thermal analysis, the maximum temperature of metal fuel was estimated to be 110 .deg. C which is lower than the allowable value under normal operation condition. Therefore, it is shown that the MVDS system can feasibly accomodate the reduced metal fuel in aspect of thermal safety

  16. Automated knowledge acquisition for second generation knowledge base systems: A conceptual analysis and taxonomy

    Williams, K.E.; Kotnour, T.

    1991-01-01

    In this paper, we present a conceptual analysis of knowledge-base development methodologies. The purpose of this research is to help overcome the high cost and lack of efficiency in developing knowledge base representations for artificial intelligence applications. To accomplish this purpose, we analyzed the available methodologies and developed a knowledge-base development methodology taxonomy. We review manual, machine-aided, and machine-learning methodologies. A set of developed characteristics allows description and comparison among the methodologies. We present the results of this conceptual analysis of methodologies and recommendations for development of more efficient and effective tools.

  17. Automated knowledge acquisition for second generation knowledge base systems: A conceptual analysis and taxonomy

    Williams, K.E.; Kotnour, T.

    1991-12-31

    In this paper, we present a conceptual analysis of knowledge-base development methodologies. The purpose of this research is to help overcome the high cost and lack of efficiency in developing knowledge base representations for artificial intelligence applications. To accomplish this purpose, we analyzed the available methodologies and developed a knowledge-base development methodology taxonomy. We review manual, machine-aided, and machine-learning methodologies. A set of developed characteristics allows description and comparison among the methodologies. We present the results of this conceptual analysis of methodologies and recommendations for development of more efficient and effective tools.

  18. Conceptual design of a system for detecting national diversion of LWR spent fuel

    Holmes, J.P.

    1978-09-01

    A conceptual design for detecting the national diversion of light water reactor spent fuel in water basin storage or in transit between facilities is described. This is the third in a series of reports dealing with this topic. The first report provides the spent fuel facilities and operations baseline description; the second report discusses cost and performance tradeoffs for three inspection and surveillance concepts for the detection of a national diversion of spent fuel. The conceptual design presented herein will provide a basis for future feasibility investigations and tradeoff analyses of hardware configurations and inspection options

  19. Conceptual design of retrieval systems for emplaced transuranic waste containers in a salt bed depository. Final report

    Fogleman, S.F.

    1980-04-01

    The US Department of Energy and the Nuclear Regulatory Commission have jurisdiction over the nuclear waste management program. Design studies were previously made of proposed repository site configurations for the receiving, processing, and storage of nuclear wastes. However, these studies did not provide operational designs that were suitable for highly reliable TRU retrieval in the deep geologic salt environment for the required 60-year period. The purpose of this report is to develop a conceptual design of a baseline retrieval system for emplaced transuranic waste containers in a salt bed depository. The conceptual design is to serve as a working model for the analysis of the performance available from the current state-of-the-art equipment and systems. Suggested regulations would be based upon the results of the performance analyses

  20. Complex Dynamic Systems View on Conceptual Change: How a Picture of Students' Intuitive Conceptions Accrue from Dynamically Robust Task Dependent Learning Outcomes

    Koponen, Ismo T.; Kokkonen, Tommi; Nousiainen, Maiji

    2017-01-01

    We discuss here conceptual change and the formation of robust learning outcomes from the viewpoint of complex dynamic systems (CDS). The CDS view considers students' conceptions as context dependent and multifaceted structures which depend on the context of their application. In the CDS view the conceptual patterns (i.e. intuitive conceptions…

  1. Towards the conceptual design of the ITER real-time plasma control system

    Winter, A.; Makijarvi, P.; Simrock, S.; Snipes, J.A.; Wallander, A.; Zabeo, L.

    2014-01-01

    Highlights: • We describe the main control areas and interfaces for the ITER real-time plasma control system and the current state of their design. • An overview is given for the implementation strategy for the plasma control system as part of the ITER control, data access and communication system. • Current efforts on the creation of simulation and development tools are presented. - Abstract: ITER will be the world's largest magnetic confinement tokamak fusion device and is currently under construction in southern France. The ITER Plasma Control System (PCS) is a fundamental component of the ITER Control, Data Access and Communication system (CODAC). It will control the evolution of all plasma parameters that are necessary to operate ITER throughout all phases of the discharge. The design and implementation of the PCS poses a number of unique challenges. The timescales of phenomena to be controlled spans three orders of magnitude, ranging from a few milliseconds to seconds. Novel control schemes, which have not been implemented at present-day machines need to be developed, and control schemes that are only done as demonstration experiments today will have to become routine. In addition, advances in computing technology and available physics models make the implementation of real-time or faster-than-real-time predictive calculations to forecast and subsequently to avoid disruptions or undesired plasma regimes feasible. This requires the PCS design to be adaptable in real-time to the results of these forecasting algorithms. A further novel feature is a sophisticated event handling system, which provides a means to deal with plasma related events (such as MHD instabilities or L-H transitions) or component failure. Finally, the schedule for design and implementation poses another challenge. The beginning of ITER operation will be in late 2020, but the conceptual design activity of the PCS has already commenced as required by the on-going development of

  2. ‘Smart food city’: conceptual relations between smart city planning, urban food systems and innovation theory

    Maye, Damian

    2018-01-01

    This paper develops a conceptual link between smart city planning and urban food systems research in terms of governance and innovation. The ‘smart city’ concept is linked to an urban research agenda which seeks to embed advances in technology and data collection into the infrastructures of urban environments. Through this neoliberal framework, market-led and technological solutions to city governance and development are prioritised. The urban food movement has a different trajectory compared...

  3. A Conceptual Framework for the Electronic Performance Support Systems within IBM Lotus Notes 6 (LN6 Example

    Servet BAYRAM

    2005-10-01

    Full Text Available A Conceptual Framework for the Electronic PerformanceSupport Systems within IBM Lotus Notes 6 (LN6 Example Assoc. Prof. Dr. Servet BAYRAM Computer Education & Instructional Technologies Marmara University, TURKEYsbayram@marmara.edu.tr ABSTRACT The concept of Electronic Performance Support Systems (EPSS is containing multimedia or computer based instruction components that improves human performance by providing process simplification, performance information and decision support system. EPSS has become a hot topic for organizational development, human resources, performance technology, training, and educational development professionals. A conceptual framework of EPSS is constructed under five interrelated and interdependent domains for educational implications. The domains of the framework are online collaboration, cost-effectiveness, motivation, service management, and performance empowering. IBM Lotus Notes 6 (LN6 is used as an example application tool to illustrate the power of this framework. The framework describes a set of relevant events based upon deductive analyses for improving our understanding of the EPSS and its implications on education and training. The article is also pointed out that there are some similarities between the EPSS’ and the LN6’s specific features within this conceptual framework. It can provide some guidelines and benefits to researchers, educators, and designers as well.

  4. Learning spaces as representational scaffolds for learning conceptual knowledge of system behaviour

    Bredeweg, B.; Liem, J.; Beek, W.; Salles, P.; Linnebank, F.; Wolpers, M.; Kirschner, P.A.; Scheffel, M.; Lindstaedt, S.; Dimitrova, V.

    2010-01-01

    Scaffolding is a well-known approach to bridge the gap between novice and expert capabilities in a discovery-oriented learning environment. This paper discusses a set of knowledge representations referred to as Learning Spaces (LSs) that can be used to support learners in acquiring conceptual

  5. Conceptual design of a municipal energy and environmental system as an efficient basis for advanced energy planning

    Kostevšek, Anja; Petek, Janez; Čuček, Lidija; Pivec, Aleksandra

    2013-01-01

    Effectively implementing various energy and environmental policies contributes to the acceleration of energy performance, a reduction in negative environmental impacts, and increased deployment of renewable resources. The MEEMS (municipal energy and environmental management system) performs the almost inconceivable role of accomplishing prerequisite targets at the national level and, consequently, the European and World levels also. Therefore, a proper infrastructure for MEEMS needs to be effectively applied in order to implement policy initiatives. A novel organisational framework of MEEMS is proposed and is constituted upon three pillars: integration of the municipal metabolism approach, the KBS (knowledge-based system), and the MTIS (municipal technology innovation system). By properly addressing the dynamics of the MEES (municipal energy and environmental system), and the new conceptual organisation of MEEMS, a need for the inclusion of innovative elements can be defined regarding support mechanisms. Integration of the end-user approach defines the fundamental orientation of modern MEEMS. This new concept paves a pathway towards an intelligent energy and environmental system. This paper describes an implementation of the new conceptual design of MEEMS within the urban municipality energy system of Ptuj, Slovenia. - Highlights: • Combination of energy and environmental management system (MEEMS) within municipalities is proposed. • Novel MEEMS structure to accomplish more effective functioning of the system. • Accelerated energy policy implementation process is enabled with proposed MEEMS. • Key ingredients to transform present energy systems to more innovative ones are discussed

  6. Hydrogeological conceptual model for Guarani Aquifer System: A tool for management; Modelo hidrogeologico conceptual del Sistema Acuifero Guarani (SAG): una herramienta para la gestion

    Gastmans, D.; Veroslavsky, G.; Kiang Cahng, H.; Caetano-Chang, M. R.; Nogueira Pressinotti, M. M.

    2012-11-01

    The Guarani aquifer system (GAS) extends beneath the territories of Argentina, Brazil, Paraguay and Uruguay and thus represents a typical example of a transboundary aquifer. The GAS is an important source of drinking water for the population living within its area. Because of differences in the legal norms concerning water resources in these four countries, an urgently required legal framework for the shared management of the groundwater is currently being drawn up. Within this context, the conceptual regional hydrogeological model should be used as an important tool to delineate shared actions, particularly in regions where the groundwater flow is transboundary. The GAS is considered to be a continuous aquifer made up of Mesozoic continental clastic sedimentary rocks that occur in the Parana and Chacoparanense sedimentary basins, and is bounded at its base by a Permo-Eotriassic regional unconformity and at the top by lower-Cretaceous basaltic lava. The groundwater flow shows a regional trend from N to S along the main axis of these basins. With regard to the major tectonic structures of these sedimentary basins, various main hydrodynamic domains can be distinguished, such as the Ponta Grossa arch and the Asuncion-Rio Grande dorsal. Regional recharge areas are primarily located in the eastern and northern outcrop areas, whilst the western end of the GAS, the Mato Grosso do Sul, contains zones of local recharge and regional discharge. Transboundary flow is observed in areas confined to the national borders of the four countries. Nevertheless, due to the groundwater residence times in the GAS special management actions are called for to prevent over-exploitation, particularly in the confined zones of the aquifer. (Author)

  7. Conceptual design of the fast ignition laser fusion power plant (KOYO-Fast). 6. Design of chamber and reactor system

    Kozaki, Yasuji; Norimatsu, Takayoshi; Furukawa, Hiroyuki; Hayashi, Takumi; Souman, Yoshihito; Nishikawa, Masabumi; Tomabechi, Ken

    2007-01-01

    A conceptual design of the reactor chamber system with LiPb liquid wall based on the fast ignition cone target design and the related reactor systems with exhaust system, laser beam shutter, blanket and cooling system are summarized. The multi overflow fall method was investigated as the structure of chamber and repeating 4 Hz pulse potential. The ablation depth of LiPb liquid wall was estimated and the conditions of repeat of operation were evaluated. The basic design of chamber, selection and conditions of liquid wall chamber, recycle type multi overflow fall (MOF) wall, LiPb two layers blanket structure, basic specification of reactor system, laser beam line shutter, design of chamber exhaust system, cooling system, tritium recovery system, power plant total design and arrangement of chamber and laser beam, and issues are stated. (S.Y.)

  8. Conceptual design of a lunar oxygen pilot plant Lunar Base Systems Study (LBSS) task 4.2

    1988-01-01

    The primary objective was to develop conceptual designs of two pilot plants to produce oxygen from lunar materials. A lunar pilot plant will be used to generate engineering data necessary to support an optimum design of a larger scale production plant. Lunar oxygen would be of primary value as spacecraft propellant oxidizer. In addition, lunar oxygen would be useful for servicing nonregenerative fuel cell power systems, providing requirements for life support, and to make up oxygen losses from leakage and airlock cycling. Thirteen different lunar oxygen production methods are described. Hydrogen reduction of ilmenite and extraction of solar-wind hydrogen from bulk lunar soil were selected for conceptual design studies. Trades and sensitivity analyses were performed with these models.

  9. The Art of Displacement: Designing Experiential Systems and Transverse Epistemologies as Conceptual Criticism

    Rolf Hughes

    2014-07-01

    Full Text Available With architects and designers increasingly facing problems that are neither predictable nor simple but highly complex, a particular synthesis of design intelligence and creativity is required. If the art of being a professional is becoming ‘the art of managing complexity’, what are the ‘boundaries’ of professional practice? ‘Trans-disciplinarity’, for example, requires liminal or neither/nor thinking (thus ‘boundary concepts’ remain a core concern. A concern with boundaries and ‘edges’ implies in turn a concern with ‘relationality’ (i.e. how we establish relations, positions, borders between different disciplinary priorities and methods and thence a problem that affects how we think of disciplinarity, interdisciplinarity, networks of various kinds, and trans-disciplinarity – that of ‘substance’, ‘content’ or ‘matter’.This paper subjects design research, theory and practice to transverse epistemologies, attempting a ‘flow of transformations’ via such themes as authorship, remediation, smuggling, disruptive innovation, performative knowledge, and gesture versus identity. It brings together an ars combinatoria of conceptual criticism, trans-disciplinary practice as ‘disruptive innovation’, Michael Speaks’s notion of ‘design intelligence’ and Margaret Boden’s three types of creativity – combinatorial, exploratory, and transformational – seeking thereby to suggest new structures that might yield ‘transdisciplines’. Departing from two separate points – Bruno Latour’s call for ‘earthly accounts of buildings and design processes’ and Jack Burnham’s identification of a paradigm shift from an ‘object-oriented’ to a ‘systems-oriented’ culture – the paper describes the formation of a new interdisciplinary practice, experience design (the design of meaningful experience across time, as a form of ‘epistemological Conceptualism’. This prioritises critical thinking and

  10. Three-dimensional conceptual model for the Hanford Site unconfined aquifer system, FY 1993 status report

    Thorne, P.D.; Chamness, M.A.; Spane, F.A. Jr.; Vermeul, V.R.; Webber, W.D.

    1993-12-01

    The ground water underlying parts of the Hanford Site (Figure 1.1) contains radioactive and chemical contaminants at concentrations exceeding regulatory standards (Dresel et al. 1993). The Hanford Site Ground-Water Surveillance Project, operated by Pacific Northwest Laboratory (PNL), is responsible for monitoring the movement of these contaminants to ensure that public health and the environment are protected. To support the monitoring effort, a sitewide three-dimensional ground-water flow model is being developed. This report provides an update on the status of the conceptual model that will form the basis for constructing a numerical three-dimensional flow model for, the site. Thorne and Chamness (1992) provide additional information on the initial development of the three-dimensional conceptual model

  11. The Conceptual Idea of Online Social Media Site (SMS) User Account Penetration Testing System

    Chockalingam, Sabarathinam; Lallie, Harjinder Singh

    2014-01-01

    Social Media Site (SMS) usage has grown rapidly in the last few years. This sudden increase in SMS usage creates an opportunity for data leakage which could compromise personal and/or professional life. In this work, we have reviewed traditional penetration testing process and discussed the failures of traditional penetration testing process to test the 'People' layer of Simple Enterprise Security Architecture (SESA) model. In order to overcome these failures, we have developed the conceptual...

  12. Conceptual study of advanced PWR systems. A study of passive and inherent safety design concepts for advanced light water reactors

    Chang, Soon Heung; No, Hee Cheon; Baek, Won Pil; Jae, Shim Young; Lee, Goung Jin; Na, Man Gyun; Lee, Jae Young; Kim, Han Gon; Kang, Ki Sig; Moon, Sang Ki; Kim, Yun Il; Park, Jae Wook; Yang, Soo Hyung; Kim, Soo Hyung; Lee, Seong Wook; Kim, Hong Che; Park, Hyun Sik; Jeong, Ji Hwan; Lee, Sang Il; Jung, Hae Yong; Kim, Hyong Tae; Chae, Kyung Sun; Moon, Ki Hoon [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1995-08-01

    The five thermal-hydraulic concepts chosen for advanced PWR have been studied as follows: (1) Critical Heat Flux: Review of previous works, analysis of parametric trends, analysis of transient CHF characteristics, extension of the CHF date bank, survey and assessment of correlations, design of a intermediate-pressure CHF test loop have been performed. (2) Passive Cooling Concepts for Concrete Containment system: Review of condensation phenomena with noncondensable gases, selection of a promising concept (i.e., use of external condensers), design of test loop according to scaling laws have been accomplished. and computer programs based on the control-volume approach, and the conceptual design of test loop have been accomplished. (4) Fluidic Diode Concepts: Review of previous applications of the concept, analysis major parameters affecting the performance, development of a computational code, and conceptual investigation of the verification test loop have been performed. (5) Wet Thermal Insulator: Review of previous works, selection of promising methods ( i.e. ceramic fiber in a steel case and mirror-type insulator), and conceptual design of the experimental loop have been performed. (author). 9 refs.

  13. ON THE MAKING OF A SYSTEM THEORY OF LIFE: PAUL A WEISS AND LUDWIG VON BERTALANFFY’S CONCEPTUAL CONNECTION

    Drack, Manfred; Apfalter, Wilfried; Pouvreau, David

    2010-01-01

    In this article, we review how two eminent Viennese system thinkers, Paul A Weiss and Ludwig von Bertalanffy, began to develop their own perspectives toward a system theory of life in the 1920s. Their work is especially rooted in experimental biology as performed at the Biologische Versuchsanstalt, as well as in philosophy, and they converge in basic concepts. We underline the conceptual connections of their thinking, among them the organism as an organized system, hierarchical organization, and primary activity. With their system thinking, both biologists shared a strong desire to overcome what they viewed as a “mechanistic” approach in biology. Their interpretations are relevant to the renaissance of system thinking in biology—“systems biology.” Unless otherwise noted, all translations are our own. PMID:18217527

  14. On the making of a system theory of life: Paul A Weiss and Ludwig von Bertalanffy's conceptual connection.

    Drack, Manfred; Apfalter, Wilfried; Pouvreau, David

    2007-12-01

    In this article, we review how two eminent Viennese system thinkers, Paul A Weiss and Ludwig von Bertalanffy, began to develop their own perspectives toward a system theory of life in the 1920s. Their work is especially rooted in experimental biology as performed at the Biologische Versuchsanstalt, as well as in philosophy, and they converge in basic concepts. We underline the conceptual connections of their thinking, among them the organism as an organized system, hierarchical organization, and primary activity. With their system thinking, both biologists shared a strong desire to overcome what they viewed as a "mechanistic" approach in biology. Their interpretations are relevant to the renaissance of system thinking in biology--"systems biology." Unless otherwise noted, all translations are our own.

  15. A conceptual geochemical model of the geothermal system at Surprise Valley, CA

    Fowler, Andrew P. G.; Ferguson, Colin; Cantwell, Carolyn A.; Zierenberg, Robert A.; McClain, James; Spycher, Nicolas; Dobson, Patrick

    2018-03-01

    Characterizing the geothermal system at Surprise Valley (SV), northeastern California, is important for determining the sustainability of the energy resource, and mitigating hazards associated with hydrothermal eruptions that last occurred in 1951. Previous geochemical studies of the area attempted to reconcile different hot spring compositions on the western and eastern sides of the valley using scenarios of dilution, equilibration at low temperatures, surface evaporation, and differences in rock type along flow paths. These models were primarily supported using classical geothermometry methods, and generally assumed that fluids in the Lake City mud volcano area on the western side of the valley best reflect the composition of a deep geothermal fluid. In this contribution, we address controls on hot spring compositions using a different suite of geochemical tools, including optimized multicomponent geochemistry (GeoT) models, hot spring fluid major and trace element measurements, mineralogical observations, and stable isotope measurements of hot spring fluids and precipitated carbonates. We synthesize the results into a conceptual geochemical model of the Surprise Valley geothermal system, and show that high-temperature (quartz, Na/K, Na/K/Ca) classical geothermometers fail to predict maximum subsurface temperatures because fluids re-equilibrated at progressively lower temperatures during outflow, including in the Lake City area. We propose a model where hot spring fluids originate as a mixture between a deep thermal brine and modern meteoric fluids, with a seasonally variable mixing ratio. The deep brine has deuterium values at least 3 to 4‰ lighter than any known groundwater or high-elevation snow previously measured in and adjacent to SV, suggesting it was recharged during the Pleistocene when meteoric fluids had lower deuterium values. The deuterium values and compositional characteristics of the deep brine have only been identified in thermal springs and

  16. Management of Information and Infrastructure of Indigenous Community at Royal Belum State Park Using Geographical Information System: A Conceptual Design

    Othman Zainon

    2015-06-01

    Full Text Available Abstract. Nowadays, an integrated location, descriptive inventory data and geographical information are required for a better decision making in Indigenous community management activities. The management system can improve productivity and to save time, money and man power. Conventional maps and Indigenous inventories on papers or spread sheet are lack of meeting these requirements which are not static and subjected to change rapidly. The Geographic Information Systems (GIS and Database Management (DBM System are capabilities and confined in manipulation of location and descriptive data, respectively. A GIS system is chosen in Management Information and Infrastructure of Indigenous Communities because its meets all the requirements that can help the authorities to managed the community. GIS able to manipulate location and descriptive data as well as the relationships between them are dynamic. This paper will discussed briefly the conceptual design of GIS activities and Indigenous community in Royal Belum State Park, Malaysia, then terminology and theoretical concepts of GIS, Indigenous community management and the link between them are reviewed. Keywords: Management, information, infrastructure, conceptual design, Indigenous community

  17. Management of Information and Infrastructure of Indigenous Community at Royal Belum State Park Using Geographical Information System: A Conceptual Design

    Othman Zainon

    2015-07-01

    Full Text Available Abstract. Nowadays, an integrated location, descriptive inventory data and geographical information are required for a better decision making in Indigenous community management activities. The management system can improve productivity and to save time, money and man power. Conventional maps and Indigenous inventories on papers or spread sheet are lack of meeting these requirements which are not static and subjected to change rapidly. The Geographic Information Systems (GIS and Database Management (DBM System are capabilities and confined in manipulation of location and descriptive data, respectively. A GIS system is chosen in Management Information and Infrastructure of Indigenous Communities because its meets all the requirements that can help the authorities to managed the community. GIS able to manipulate location and descriptive data as well as the relationships between them are dynamic. This paper will discussed briefly the conceptual design of GIS activities and Indigenous community in Royal Belum State Park, Malaysia, then terminology and theoretical concepts of GIS, Indigenous community management and the link between them are reviewed.Keywords:  Management, information, infrastructure, conceptual design, Indigenous community 

  18. Conceptual design report for a remotely operated cask handling system. Revision 1

    Yount, J.A.; Berger, J.D.

    1984-09-01

    Recent advances in remote handling utilizing commercial robotics are conceptually applied to lowering operator cumulative radiation exposure and increasing throughput during cask handling operations in nuclear shipping and receiving facilities. Revision 1 incorporates functional criteria for facility equipment, equipment technical outline specifications, and interface control drawings to assist Architect Engineers in the application of remote handling to waste shipping and receiving facilities. The document has also been updated to show some of the equipment used in proof-of-principle testing during fiscal year 1984. 10 references, 50 figures, 1 table

  19. An Expert System-Driven Method for Parametric Trajectory Optimization During Conceptual Design

    Dees, Patrick D.; Zwack, Mathew R.; Steffens, Michael; Edwards, Stephen; Diaz, Manuel J.; Holt, James B.

    2015-01-01

    During the early phases of engineering design, the costs committed are high, costs incurred are low, and the design freedom is high. It is well documented that decisions made in these early design phases drive the entire design's life cycle cost. In a traditional paradigm, key design decisions are made when little is known about the design. As the design matures, design changes become more difficult in both cost and schedule to enact. The current capability-based paradigm, which has emerged because of the constrained economic environment, calls for the infusion of knowledge usually acquired during later design phases into earlier design phases, i.e. bringing knowledge acquired during preliminary and detailed design into pre-conceptual and conceptual design. An area of critical importance to launch vehicle design is the optimization of its ascent trajectory, as the optimal trajectory will be able to take full advantage of the launch vehicle's capability to deliver a maximum amount of payload into orbit. Hence, the optimal ascent trajectory plays an important role in the vehicle's affordability posture yet little of the information required to successfully optimize a trajectory is known early in the design phase. Thus, the current paradigm of optimizing ascent trajectories involves generating point solutions for every change in a vehicle's design parameters. This is often a very tedious, manual, and time-consuming task for the analysts. Moreover, the trajectory design space is highly non-linear and multi-modal due to the interaction of various constraints. When these obstacles are coupled with the Program to Optimize Simulated Trajectories (POST), an industry standard program to optimize ascent trajectories that is difficult to use, expert trajectory analysts are required to effectively optimize a vehicle's ascent trajectory. Over the course of this paper, the authors discuss a methodology developed at NASA Marshall's Advanced Concepts Office to address these issues

  20. Conceptualization and Appropriation

    Bossen, Claus; Dalsgård, Peter

    2005-01-01

    parasitic system. First, we argue that the failure of the management's system is caused by the concept of knowledge upon which the system was built. Hence, design of computer systems is as much a question of critical conceptual understanding of its application domain as a question of doing ethnography...

  1. Conceptual foundations of inclusive systems in and around schools for early school leaving prevention: An emotional-relational focus

    Downes Paul

    2017-01-01

    Full Text Available Against the background of the EU2020 headline target of reducing early school leaving to 10% across Europe, this article examines the conceptual foundations of the understanding of inclusive systems for early school leaving prevention that has emerged in EU policy documents and research reports in recent years. Traditionally, inclusive education has referred to a focus on children with special educational needs. However, this conceptual review examines how inclusion is increasingly being examined in broader terms.This review seeks to critically reconstruct foundational understandings of systems and resilience in developmental and educational psychology. A systems focus on inclusion needs to address the neglect in psychology of system blockages and power imbalances. Resilience is typically framed as the capacity of the individual to navigate their way to environmental resources. This places the onus of accessibility onto the individual’s efforts rather than a concern with responsive systems accessible to marginalised groups. A concern with inclusive systems goes beyond not only the well-established framework of individual resilience in developmental psychology, but also beyond its expansion into resilient systems, as these omit a focus on outreach and multidisciplinary teams in systems of care for integrated services. Common principles for a framework of inclusive systems include children’s voices, equality and non-discrimination, parental involvement that is integrated holistically with family support, and lifelong learning principles for schools. Illustrative examples of these principles for reforming authoritarian teaching and discriminatory bullying, for opening schools to the local community and for targeting those with highest levels of need are highlighted.

  2. Conceptual Design and Feasibility Analyses of a Robotic System for Automated Exterior Wall Painting

    Young S. Kim

    2008-11-01

    Full Text Available There are approximately 6,677,000 apartment housing units in South Korea. Exterior wall painting for such multi-dwelling apartment housings in South Korea represents a typical area to which construction automation technology can be applied for improvement in safety, productivity, quality, and cost over the conventional method. The conventional exterior wall painting is costly and labor-intensive, and it especially exposes workers to significant health and safety risks. The primary objective of this study is to design a conceptual model of an exterior wall painting robot which is applicable to apartment housing construction and maintenance, and to conduct its technical?economical feasibility analyses. In this study, a design concept using a high ladder truck is proposed as the best alternative for automation of the exterior wall painting. Conclusions made in this study show that the proposed exterior wall painting robot is technically and economically feasible, and can greatly enhance safety, productivity, and quality compared to the conventional method. Finally, it is expected that the conceptual model of the exterior wall painting robot would be efficiently used in various applications in exterior wall finishing and maintenance of other architectural and civil structures such as commercial buildings, towers, and high-rise storage tanks.

  3. A conceptual solution for a beam halo collimation system for the Future Circular hadron-hadron Collider (FCC-hh)

    Fiascaris, M.; Bruce, R.; Redaelli, S.

    2018-06-01

    We present the first conceptual solution for a collimation system for the hadron-hadron option of the Future Circular Collider (FCC-hh). The collimation layout is based on the scaling of the present Large Hadron Collider collimation system to the FCC-hh energy and it includes betatron and momentum cleaning, as well as dump protection collimators and collimators in the experimental insertions for protection of the final focus triplet magnets. An aperture model for the FCC-hh is defined and the geometrical acceptance is calculated at injection and collision energy taking into account mechanical and optics imperfections. The performance of the system is then assessed through the analysis of normalized halo distributions and complete loss maps for an ideal lattice. The performance limitations are discussed and a solution to improve the system performance with the addition of dispersion suppression collimators around the betatron cleaning insertion is presented.

  4. Conceptual and numerical models of the glacial aquifer system north of Aberdeen, South Dakota

    Marini, Katrina A.; Hoogestraat, Galen K.; Aurand, Katherine R.; Putnam, Larry D.

    2012-01-01

    This U.S. Geological Survey report documents a conceptual and numerical model of the glacial aquifer system north of Aberdeen, South Dakota, that can be used to evaluate and manage the city of Aberdeen's water resources. The glacial aquifer system in the model area includes the Elm, Middle James, and Deep James aquifers, with intervening confining units composed of glacial till. The Elm aquifer ranged in thickness from less than 1 to about 95 feet (ft), with an average thickness of about 24 ft; the Middle James aquifer ranged in thickness from less than 1 to 91 ft, with an average thickness of 13 ft; and the Deep James aquifer ranged in thickness from less than 1 to 165 ft, with an average thickness of 23 ft. The confining units between the aquifers consisted of glacial till and ranged in thickness from 0 to 280 ft. The general direction of groundwater flow in the Elm aquifer in the model area was from northwest to southeast following the topography. Groundwater flow in the Middle James aquifer was to the southeast. Sparse data indicated a fairly flat potentiometric surface for the Deep James aquifer. Horizontal hydraulic conductivity for the Elm aquifer determined from aquifer tests ranged from 97 to 418 feet per day (ft/d), and a confined storage coefficient was determined to be 2.4x10-5. Estimates of the vertical hydraulic conductivity of the sediments separating the Elm River from the Elm aquifer, determined from the analysis of temperature gradients, ranged from 0.14 to 2.48 ft/d. Average annual precipitation in the model area was 19.6 inches per year (in/yr), and agriculture was the primary land use. Recharge to the Elm aquifer was by infiltration of precipitation through overlying outwash, lake sediments, and glacial till. The annual recharge for the model area, calculated by using a soil-water-balance method for water year (WY) 1975-2009, ranged from 0.028 inch in WY 1980 to 4.52 inches in WY 1986, with a mean of 1.56 inches. The annual potential

  5. Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 1: Army fault tolerant architecture overview

    Harper, R. E.; Alger, L. S.; Babikyan, C. A.; Butler, B. P.; Friend, S. A.; Ganska, R. J.; Lala, J. H.; Masotto, T. K.; Meyer, A. J.; Morton, D. P.

    1992-01-01

    Digital computing systems needed for Army programs such as the Computer-Aided Low Altitude Helicopter Flight Program and the Armored Systems Modernization (ASM) vehicles may be characterized by high computational throughput and input/output bandwidth, hard real-time response, high reliability and availability, and maintainability, testability, and producibility requirements. In addition, such a system should be affordable to produce, procure, maintain, and upgrade. To address these needs, the Army Fault Tolerant Architecture (AFTA) is being designed and constructed under a three-year program comprised of a conceptual study, detailed design and fabrication, and demonstration and validation phases. Described here are the results of the conceptual study phase of the AFTA development. Given here is an introduction to the AFTA program, its objectives, and key elements of its technical approach. A format is designed for representing mission requirements in a manner suitable for first order AFTA sizing and analysis, followed by a discussion of the current state of mission requirements acquisition for the targeted Army missions. An overview is given of AFTA's architectural theory of operation.

  6. Developing a conceptual model for the application of patient and public involvement in the healthcare system in Iran.

    Azmal, Mohammad; Sari, Ali Akbari; Foroushani, Abbas Rahimi; Ahmadi, Batoul

    2016-06-01

    Patient and public involvement is engaging patients, providers, community representatives, and the public in healthcare planning and decision-making. The purpose of this study was to develop a model for the application of patient and public involvement in decision making in the Iranian healthcare system. A mixed qualitative-quantitative approach was used to develop a conceptual model. Thirty three key informants were purposely recruited in the qualitative stage, and 420 people (patients and their companions) were included in a protocol study that was implemented in five steps: 1) Identifying antecedents, consequences, and variables associated with the patient and the publics' involvement in healthcare decision making through a comprehensive literature review; 2) Determining the main variables in the context of Iran's health system using conceptual framework analysis; 3) Prioritizing and weighting variables by Shannon entropy; 4) designing and validating a tool for patient and public involvement in healthcare decision making; and 5) Providing a conceptual model of patient and the public involvement in planning and developing healthcare using structural equation modeling. We used various software programs, including SPSS (17), Max QDA (10), EXCEL, and LISREL. Content analysis, Shannon entropy, and descriptive and analytic statistics were used to analyze the data. In this study, seven antecedents variable, five dimensions of involvement, and six consequences were identified. These variables were used to design a valid tool. A logical model was derived that explained the logical relationships between antecedent and consequent variables and the dimensions of patient and public involvement as well. Given the specific context of the political, social, and innovative environments in Iran, it was necessary to design a model that would be compatible with these features. It can improve the quality of care and promote the patient and the public satisfaction with healthcare and

  7. Conceptual design of advanced central receiver power systems sodium-cooled receiver concept. Volume 2, Book 2. Appendices. Final report

    1979-03-01

    The appendices include: (A) design data sheets and P and I drawing for 100-MWe commercial plant design, for all-sodium storage concept; (B) design data sheets and P and I drawing for 100-MWe commercial plant design, for air-rock bed storage concept; (C) electric power generating water-steam system P and I drawing and equipment list, 100-MWe commercial plant design; (D) design data sheets and P and I drawing for 281-MWe commercial plant design; (E) steam generator system conceptual design; (F) heat losses from solar receiver surface; (G) heat transfer and pressure drop for rock bed thermal storage; (H) a comparison of alternative ways of recovering the hydraulic head from the advanced solar receiver tower; (I) central receiver tower study; (J) a comparison of mechanical and electromagnetic sodium pumps; (K) pipe routing study of sodium downcomer; and (L) sodium-cooled advanced central receiver system simulation model. (WHK)

  8. Conceptual design and development of GEM based detecting system for tomographic tungsten focused transport monitoring

    Chernyshova, M.; Czarski, T.; Malinowski, K.; Kowalska-Strzęciwilk, E.; Poźniak, K.; Kasprowicz, G.; Zabołotny, W.; Wojeński, A.; Kolasiński, P.; Mazon, D.; Malard, P.

    2015-10-01

    Implementing tungsten as a plasma facing material in ITER and future fusion reactors will require effective monitoring of not just its level in the plasma but also its distribution. That can be successfully achieved using detectors based on Gas Electron Multiplier (GEM) technology. This work presents the conceptual design of the detecting unit for poloidal tomography to be tested at the WEST project tokamak. The current stage of the development is discussed covering aspects which include detector's spatial dimensions, gas mixtures, window materials and arrangements inside and outside the tokamak ports, details of detector's structure itself and details of the detecting module electronics. It is expected that the detecting unit under development, when implemented, will add to the safe operation of tokamak bringing the creation of sustainable nuclear fusion reactors a step closer. A shorter version of this contribution is due to be published in PoS at: 1st EPS conference on Plasma Diagnostics

  9. Conceptual and Numerical Modeling of Radionuclide Transport and Retention in Near-Surface Systems

    Pique, Angels; Arcos, David; Grandia, Fidel; Molinero, Jorge; Duro, Lara; Berglund, Sten

    2013-01-01

    Scenarios of barrier failure and radionuclide release to the near-surface environment are important to consider within performance and safety assessments of repositories for nuclear waste. A geological repository for spent nuclear fuel is planned at Forsmark, Sweden. Conceptual and numerical reactive transport models were developed in order to assess the retention capacity of the Quaternary till and clay deposits for selected radionuclides, in the event of an activity release from the repository. The elements considered were carbon (C), chlorine (Cl), cesium (Cs), iodine (I), molybdenum (Mo), niobium (Nb), nickel (Ni), radium (Ra), selenium (Se), strontium (Sr), technetium (Tc), thorium (Th), and uranium (U). According to the numerical predictions, the repository-derived nuclides that would be most significantly retained are Th, Ni, and Cs, mainly through sorption onto clays, followed by U, C, Sr, and Ra, trapped by sorption and/or incorporation into mineral phases

  10. PUBLIC SECTOR CONCEPTUALIZATION OF ECONOMY IN SYSTEM OF ECONOMIC AND THEORETICAL KNOWLEDGE

    Y. Hirnyk

    2017-06-01

    Full Text Available The article examines trends shaping the problem of "public sector". The research shows the history of the formation of the concept of "social economy", its relationship with the basic principles of theoretical economic analysis and development. The paper investigates process of establishing the structure of the phenomenon of the public sector and its interaction with the challenges of the modern world and the global economy. The article deals with the role of the public sector in the production of public goods. The researchers evaluated the effect of its scale in indicators of social, economic and i institutional development. The study singled out performance criteria for public sector institutions and analyzed changes of vectors public choice in terms of globalization changes. It was revealed the impact of global institutional transformation and structural reforms in the public sector, in-depth conceptual basis of improving the efficiency of public sector functions.

  11. Pre-conceptual design requirements and system description for FED frame seal welder and cutter

    Masson, L.S.; Longhurst, G.R.; Watts, K.D.; Williams, S.A.

    1981-03-01

    The Fusion Engineering Device (FED) is being designed in a torus shape using ten removable segments to form the torus geometry. The torus consists of a frame and ten shield assemblies which fit into the frame and are held in place structurally using electrically insulated backing plates. It is then necessary to seal the shield segment to the frame for the assembly to sustain an internal vacuum of 10 -7 torr. This task is intended to be accomplished by welding a frame seal between the frame and the shield segment. An example of this concept is shown. This document covers the equipment requirements and pre-conceptual design description for installing and removing the frame seal

  12. Guided Classification System for Conceptual Overlapping Classes in OpenStreetMap

    Ahmed Loai Ali

    2016-06-01

    Full Text Available The increased development of Volunteered Geographic Information (VGI and its potential role in GIScience studies raises questions about the resulting data quality. Several studies address VGI quality from various perspectives like completeness, positional accuracy, consistency, etc. They mostly have consensus on the heterogeneity of data quality. The problem may be due to the lack of standard procedures for data collection and absence of quality control feedback for voluntary participants. In our research, we are concerned with data quality from the classification perspective. Particularly in VGI-mapping projects, the limited expertise of participants and the non-strict definition of geographic features lead to conceptual overlapping classes, where an entity could plausibly belong to multiple classes, e.g., lake or pond, park or garden, marsh or swamp, etc. Usually, quantitative and/or qualitative characteristics exist that distinguish between classes. Nevertheless, these characteristics might not be recognizable for non-expert participants. In previous work, we developed the rule-guided classification approach that guides participants to the most appropriate classes. As exemplification, we tackle the conceptual overlapping of some grass-related classes. For a given data set, our approach presents the most highly recommended classes for each entity. In this paper, we present the validation of our approach. We implement a web-based application called Grass&Green that presents recommendations for crowdsourcing validation. The findings show the applicability of the proposed approach. In four months, the application attracted 212 participants from more than 35 countries who checked 2,865 entities. The results indicate that 89% of the contributions fully/partially agree with our recommendations. We then carried out a detailed analysis that demonstrates the potential of this enhanced data classification. This research encourages the development of

  13. Conceptual Design of Portable Filtered Air Suction Systems For Prevention of Released Radioactive Gas under Severe Accidents of NPP

    Gu, Beom W.; Choi, Su Y.; Yim, Man S.; Rim, Chun T. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2014-05-15

    It becomes evident that severe accidents may occur by unexpected disasters such as tsunami, heavy flood, or terror. Once radioactive material is released from NPP through severe accidents, there are no ways to prevent the released radioactive gas spreading in the air. As a remedy for this problem, the idea on the portable filtered air suction system (PoFASS) for the prevention of released radioactive gas under severe accidents was proposed. In this paper, the conceptual design of a PoFASS focusing on the number of robot fingers and robot arm rods are proposed. In order to design a flexible robot suction nozzle, mathematical models for the gaps which represent the lifted heights of extensible covers for given convex shapes of pipes and for the covered areas are developed. In addition, the system requirements for the design of the robot arms of PoFASS are proposed, which determine the accessible range of leakage points of released radioactive gas. In this paper, the conceptual designs of the flexible robot suction nozzle and robot arm have been conducted. As a result, the minimum number of robot fingers and robot arm rods are defined to be four and three, respectively. For further works, extensible cover designs on the flexible robot suction nozzle and the application of the PoFASS to the inside of NPP should be studied because the radioactive gas may be released from connection pipes between the containment building and auxiliary buildings.

  14. Conceptual design of a system for nuclear material control in a research centre according to the IAEA safeguards requirements

    Bueker, H.; Kotte, U.; Stein, G.

    1976-01-01

    In comparison with other facilities handling nuclear material, a nuclear research centre is characterized by a wider spectrum of operations. This requires a number of installations within the centre such as research reactors, critical assemblies, research institutes and central departments, operating, in general, independently of each other. Nuclear material is stored and processed in small quantities and in different chemical and physical configurations within prescribed license areas. The conceptual design of a new system for nuclear material control in a research centre has to consider the operator's and IAEA's safeguards requirements. Using the example of the Juelich Nuclear Research Centre in the Federal Republic of Germany, these requirements are being examined in conjunction with the specified peculiarities of a nuclear research centre. Following this, a division of the research centre into material balance areas and key measurement points is being proposed, based on the existing facilities and licence areas. The essential characteristic of the concept is a far-reaching displayability of the inventory and flow of nuclear material. The availability of information is based on differentiated material accountancy in conjunction with adequate measurement of nuclear material data. For data processing and generation of data, a computerized record and report system is to be provided as well as a central measurement system. The design of an integrated accountancy system with a central computer and remote terminals is described; various measuring appliances, now being developed or tested, for the non-destructive assay of nuclear material are specified. The functions of a central department for nuclear material management for operating these systems are discussed and the planned verification of nuclear material in the different material balance areas illustrated. On applying the measures described in this paper, the conceptual design of a system for nuclear material

  15. Application of Deterministic and Probabilistic System Design Methods and Enhancements of Conceptual Design Tools for ERA Project

    Mavris, Dimitri N.; Schutte, Jeff S.

    2016-01-01

    This report documents work done by the Aerospace Systems Design Lab (ASDL) at the Georgia Institute of Technology, Daniel Guggenheim School of Aerospace Engineering for the National Aeronautics and Space Administration, Aeronautics Research Mission Directorate, Integrated System Research Program, Environmentally Responsible Aviation (ERA) Project. This report was prepared under contract NNL12AA12C, "Application of Deterministic and Probabilistic System Design Methods and Enhancement of Conceptual Design Tools for ERA Project". The research within this report addressed the Environmentally Responsible Aviation (ERA) project goal stated in the NRA solicitation "to advance vehicle concepts and technologies that can simultaneously reduce fuel burn, noise, and emissions." To identify technology and vehicle solutions that simultaneously meet these three metrics requires the use of system-level analysis with the appropriate level of fidelity to quantify feasibility, benefits and degradations, and associated risk. In order to perform the system level analysis, the Environmental Design Space (EDS) [Kirby 2008, Schutte 2012a] environment developed by ASDL was used to model both conventional and unconventional configurations as well as to assess technologies from the ERA and N+2 timeframe portfolios. A well-established system design approach was used to perform aircraft conceptual design studies, including technology trade studies to identify technology portfolios capable of accomplishing the ERA project goal and to obtain accurate tradeoffs between performance, noise, and emissions. The ERA goal, shown in Figure 1, is to simultaneously achieve the N+2 benefits of a cumulative noise margin of 42 EPNdB relative to stage 4, a 75 percent reduction in LTO NOx emissions relative to CAEP 6 and a 50 percent reduction in fuel burn relative to the 2005 best in class aircraft. There were 5 research task associated with this research: 1) identify technology collectors, 2) model

  16. Tailoring Systems Engineering Processes in a Conceptual Design Environment: A Case Study at NASA Marshall Spaceflight Center's ACO

    Mulqueen, John; Maples, C. Dauphne; Fabisinski, Leo, III

    2012-01-01

    This paper provides an overview of Systems Engineering as it is applied in a conceptual design space systems department at the National Aeronautics and Space Administration (NASA) Marshall Spaceflight Center (MSFC) Advanced Concepts Office (ACO). Engineering work performed in the NASA MFSC's ACO is targeted toward the Exploratory Research and Concepts Development life cycle stages, as defined in the International Council on Systems Engineering (INCOSE) System Engineering Handbook. This paper addresses three ACO Systems Engineering tools that correspond to three INCOSE Technical Processes: Stakeholder Requirements Definition, Requirements Analysis, and Integration, as well as one Project Process Risk Management. These processes are used to facilitate, streamline, and manage systems engineering processes tailored for the earliest two life cycle stages, which is the environment in which ACO engineers work. The role of systems engineers and systems engineering as performed in ACO is explored in this paper. The need for tailoring Systems Engineering processes, tools, and products in the ever-changing engineering services ACO provides to its customers is addressed.

  17. A conceptual view data model of a distributed control and monitoring system for a nuclear power plant

    Fennern, L.E.

    1987-01-01

    Three views of data are possible: the conceptual view, a superset of what is sometimes termed the global schema, which describes data as it exists in the plant; the logical view, a superset of what is sometimes termed the external schema, which describes the view of data required by applications; and the storage view, a superset of what is sometimes termed the internal schema, which describes how the data elements are represented in a database management system. Through careful attention to data base management, closer consistency between these three views of data can be achieved. Such consistency is desirable, in order to fully realize the potential for greater data accessibility and improved plant availability made possible through application of digital microelectronic and optical data transmission technologies which have been proposed for distributed control and monitoring systems of some advanced nuclear power plants

  18. Continuing professional development for teachers in South Africa and social learning systems: conflicting conceptual frameworks of learning

    G.M. Steyn

    2008-07-01

    Full Text Available To transform education in this country, South African teachers need to be appropriately equipped to meet the evolving challenges and needs of the country. The national policy framework for teacher education and development is an attempt to address the need for suitably qualified teachers in South Africa. Its aim is to improve the quality of education by focusing on the professional development of teachers. This article attempts to address the following research problem: Does continuing professional development for teachers (CPDT, as stipulated by the national policy framework, have the potential to contribute to the development of teachers as proposed by social learning systems? The answer to this question has the potential to inform and influence the policy and its implementation. The answer also describes how conceptual frameworks for learning in Wenger’s social learning systems conflict with effective professional development (PD programmes and CPDT.

  19. Heat Exchanger/Humidifier Trade Study and Conceptual Design for the Constellation Space Suit Portable Life Support System Ventilation Subsystem

    Paul, Heather L.; Sompayrac, Robert; Conger, Bruce; Chamberlain, Mateo

    2009-01-01

    As development of the Constellation Space Suit Element progresses, designing the most effective and efficient life support systems is critical. The baseline schematic analysis for the Portable Life Support System (PLSS) indicates that the ventilation loop will need some method of heat exchange and humidification prior to entering the helmet. A trade study was initiated to identify the challenges associated with conditioning the spacesuit breathing gas stream for temperature and water vapor control, to survey technological literature and resources on heat exchanger and humidifiers to provide solutions to the problems of conditioning the spacesuit breathing gas stream, and to propose potential candidate technologies to perform the heat exchanger and humidifier functions. This paper summarizes the results of this trade study and also describes the conceptual designs that NASA developed to address these issues.

  20. Conceptual design and feasibility test of two-phase hydrogen thermal siphon system of CNS in CARR

    Bi Qincheng; Chen Tingkuan; Feng Quanke; Du Shejiao; Li Xiaoming; Wei Liang

    2004-01-01

    Conceptual design of the hydrogen system of cold neutron source (CNS) in China Advanced Research Reactor (CARR) was proposed, and feasibility test was carried out. In order to determine the void fraction in neutron moderator, the circulation ability of the two-phase hydrogen thermal siphon system, and the structure of components of the CNS, the mockup test was performed using Freon-113 as working fluid. To obtain the modeling criterion so that the above experimental results can be applied to the design of CARR, the bubble rising velocities in different liquids were investigated to study the effects of physical properties such as density, viscosity and surface tension on bubble rising velocity, void fraction and circulation ability

  1. Conceptual characterization of the system of fractures of the rock mass known as Sierra del Medio (Chubut)

    Ventura, M.A.

    1990-01-01

    This work characterizes conceptually the system of fractures of the rock mass known as Sierra del Medio and its surroundings. The purpose of this characterization is to define the spectra of flow regimes which must be covered in computational models to be used in the prediction of the thermohydraulic effects of the eventual emplacement of a high-level radioactive waste repository. The analysis of the available data from previous studies was performed in order to determine qualitative data to be used in the stage of feasibility studied. The flow of water roughly N-S is defined by two systems of vertical, almost orthogonal fractures and surrounded by large faults. A set of hypotheses were considered which allow, supposing a given distribution of surface fractures, to establish the variations according to depth. The usual ways of obtaining the permeability and the hydraulic conductivity in fractured porous media are summarized in an appendix. (Author) [es

  2. Conceptual design of a connected vehicle wrong-way driving detection and management system.

    2016-04-01

    This report describes the tasks completed to develop a concept of operations, functional requirements, and : high-level system design for a Connected Vehicle (CV) Wrong-Way Driving (WWD) Detection and Management : System. This system was designed to ...

  3. PHYSICAL REHABILITATION OF LOW BACK PAIN BASED ON A CONCEPTUAL SYSTEM APPROACHES

    Olena LAZARIEVA

    2014-11-01

    Full Text Available In Europe, back pain is a common disease, this is according to European statistics. In accordance with the new case, the pain each year occurs in 5% of the population. The aim of this work is to develop a conceptual approaches to the physical rehabilitation process at the surgical treatment of patients with back pain. Materials and methods . There was researched an experience of the domestic and foreign researches in physical rehabilitation area. Methods of the research were the analysis of the references and theoretical research methods (as an analysis, interpretation and synthesis of scientific and educational literature on the study problem. Abstraction (or idealization and schematization is the allocation of the essential foundations. Also we used experimenting with schemes (as a development of their content, sophistication and usability testing at development of concepts, practical models and physical rehabilitation programs. Results. The physical rehabilitation concept at the surgical treatment of patients with back pain was developed, given by the modern science in the diagnostics field, performing difficult complex spinal surgery with the using of new tools and the knowledge from the physical rehabilitation improvement. Conclusion. The using of a systematic methodology for physical rehabilitation in the surgical treatment of patients with vertebral pathology, helps to optimize research, diagnostic, therapeutic, rehabilitative and preventive measures, providing them with the required comprehensiveness, consistency, orderliness.

  4. A conceptual data model for a primary health care patient-centric electronic medical record system

    Kotzé, P

    2014-09-01

    Full Text Available regarding continuity of care, typical healthcare protocols, a study of public healthcare district hospital information systems and both public and private primary healthcare information systems....

  5. Medical tourism and policy implications for health systems: a conceptual framework from a comparative study of Thailand, Singapore and Malaysia

    2011-01-01

    Medical tourism is a growing phenomenon with policy implications for health systems, particularly of destination countries. Private actors and governments in Southeast Asia are promoting the medical tourist industry, but the potential impact on health systems, particularly in terms of equity in access and availability for local consumers, is unclear. This article presents a conceptual framework that outlines the policy implications of medical tourism's growth for health systems, drawing on the cases of Thailand, Singapore and Malaysia, three regional hubs for medical tourism, via an extensive review of academic and grey literature. Variables for further analysis of the potential impact of medical tourism on health systems are also identified. The framework can provide a basis for empirical, in country studies weighing the benefits and disadvantages of medical tourism for health systems. The policy implications described are of particular relevance for policymakers and industry practitioners in other Southeast Asian countries with similar health systems where governments have expressed interest in facilitating the growth of the medical tourist industry. This article calls for a universal definition of medical tourism and medical tourists to be enunciated, as well as concerted data collection efforts, to be undertaken prior to any meaningful empirical analysis of medical tourism's impact on health systems. PMID:21539751

  6. Medical tourism and policy implications for health systems: a conceptual framework from a comparative study of Thailand, Singapore and Malaysia

    Phua Kai Hong

    2011-05-01

    Full Text Available Abstract Medical tourism is a growing phenomenon with policy implications for health systems, particularly of destination countries. Private actors and governments in Southeast Asia are promoting the medical tourist industry, but the potential impact on health systems, particularly in terms of equity in access and availability for local consumers, is unclear. This article presents a conceptual framework that outlines the policy implications of medical tourism's growth for health systems, drawing on the cases of Thailand, Singapore and Malaysia, three regional hubs for medical tourism, via an extensive review of academic and grey literature. Variables for further analysis of the potential impact of medical tourism on health systems are also identified. The framework can provide a basis for empirical, in country studies weighing the benefits and disadvantages of medical tourism for health systems. The policy implications described are of particular relevance for policymakers and industry practitioners in other Southeast Asian countries with similar health systems where governments have expressed interest in facilitating the growth of the medical tourist industry. This article calls for a universal definition of medical tourism and medical tourists to be enunciated, as well as concerted data collection efforts, to be undertaken prior to any meaningful empirical analysis of medical tourism's impact on health systems.

  7. Medical tourism and policy implications for health systems: a conceptual framework from a comparative study of Thailand, Singapore and Malaysia.

    Pocock, Nicola S; Phua, Kai Hong

    2011-05-04

    Medical tourism is a growing phenomenon with policy implications for health systems, particularly of destination countries. Private actors and governments in Southeast Asia are promoting the medical tourist industry, but the potential impact on health systems, particularly in terms of equity in access and availability for local consumers, is unclear. This article presents a conceptual framework that outlines the policy implications of medical tourism's growth for health systems, drawing on the cases of Thailand, Singapore and Malaysia, three regional hubs for medical tourism, via an extensive review of academic and grey literature. Variables for further analysis of the potential impact of medical tourism on health systems are also identified. The framework can provide a basis for empirical, in country studies weighing the benefits and disadvantages of medical tourism for health systems. The policy implications described are of particular relevance for policymakers and industry practitioners in other Southeast Asian countries with similar health systems where governments have expressed interest in facilitating the growth of the medical tourist industry. This article calls for a universal definition of medical tourism and medical tourists to be enunciated, as well as concerted data collection efforts, to be undertaken prior to any meaningful empirical analysis of medical tourism's impact on health systems.

  8. Conceptual Design of Electrical Propulsion System for Nuclear Operated Vessel Adventurer

    Halimi, B.; Suh, K. Y.

    2009-01-01

    A design concept of the electric propulsion system for the Nuclear Operated Vessel Adventure (NOVA) is presented. NOVA employs Battery Omnibus Reactor Integral System (BORIS), a liquid metal cooled small fast integral reactor, and Modular Optimized Brayton Integral System (MOBIS), a supercritical CO 2 (SCO 2 ) Brayton cycle as power converter to Naval Application Vessel Integral System (NAVIS)

  9. Hand movements with a phase structure and gestures that depict action stem from a left hemispheric system of conceptualization.

    Helmich, I; Lausberg, H

    2014-10-01

    The present study addresses the previously discussed controversy on the contribution of the right and left cerebral hemispheres to the production and conceptualization of spontaneous hand movements and gestures. Although it has been shown that each hemisphere contains the ability to produce hand movements, results of left hemispherically lateralized motor functions challenge the view of a contralateral hand movement production system. To examine hemispheric specialization in hand movement and gesture production, ten right-handed participants were tachistoscopically presented pictures of everyday life actions. The participants were asked to demonstrate with their hands, but without speaking what they had seen on the drawing. Two independent blind raters evaluated the videotaped hand movements and gestures employing the Neuropsychological Gesture Coding System. The results showed that the overall frequency of right- and left-hand movements is equal independent of stimulus lateralization. When hand movements were analyzed considering their Structure, the presentation of the action stimuli to the left hemisphere resulted in more hand movements with a phase structure than the presentation to the right hemisphere. Furthermore, the presentation to the left hemisphere resulted in more right and left-hand movements with a phase structure, whereas the presentation to the right hemisphere only increased contralateral left-hand movements with a phase structure as compared to hand movements without a phase structure. Gestures that depict action were primarily displayed in response to stimuli presented in the right visual field than in the left one. The present study shows that both hemispheres possess the faculty to produce hand movements in response to action stimuli. However, the left hemisphere dominates the production of hand movements with a phase structure and gestures that depict action. We therefore conclude that hand movements with a phase structure and gestures that

  10. Preliminary Criticality Calculation on Conceptual Deep Borehole Disposal System for Trans-metal Waste during Operational Phase

    Kim, In Young; Choi, Heui Joo; Cho, Dong Geun

    2013-01-01

    The primary function of any repository is to prevent spreading of dangerous materials into surrounding environment. In the case of high-level radioactive waste repository, radioactive material must be isolated and retarded during sufficient decay time to minimize radiation hazard to human and surrounding environment. Sub-criticality of disposal canister and whole disposal system is minimum requisite to prevent multiplication of radiation hazard. In this study, criticality of disposal canister and DBD system for trans-metal waste is calculated to check compliance of sub-criticality. Preliminary calculation on criticality of conceptual deep borehole disposal system and its canister for trans-metal waste during operational phase is conducted in this study. Calculated criticalities at every temperature are under sub-criticalities and criticalities of canister and DBD system considering temperature are expected to become 0.34932 and 0.37618 approximately. There are obvious limitations in this study. To obtain reliable data, exact elementary composition of each component, system component temperature must be specified and applied, and then proper cross section according to each component temperature must be adopted. However, many assumptions, for example simplified elementary concentration and isothermal component temperature, are adopted in this study. Improvement of these data must be conducted in the future work to progress reliability. And, post closure criticality analyses including geo, thermal, hydro, mechanical, chemical mechanism, especially fissile material re-deposition by precipitation and sorption, must be considered to ascertain criticality safety of DBD system as a future work

  11. Regime shifts under forcing of non-stationary attractors: Conceptual model and case studies in hydrologic systems.

    Park, Jeryang; Rao, P Suresh C

    2014-11-15

    We present here a conceptual model and analysis of complex systems using hypothetical cases of regime shifts resulting from temporal non-stationarity in attractor strengths, and then present selected published cases to illustrate such regime shifts in hydrologic systems (shallow aquatic ecosystems; water table shifts; soil salinization). Complex systems are dynamic and can exist in two or more stable states (or regimes). Temporal variations in state variables occur in response to fluctuations in external forcing, which are modulated by interactions among internal processes. Combined effects of external forcing and non-stationary strengths of alternative attractors can lead to shifts from original to alternate regimes. In systems with bi-stable states, when the strengths of two competing attractors are constant in time, or are non-stationary but change in a linear fashion, regime shifts are found to be temporally stationary and only controlled by the characteristics of the external forcing. However, when attractor strengths change in time non-linearly or vary stochastically, regime shifts in complex systems are characterized by non-stationary probability density functions (pdfs). We briefly discuss implications and challenges to prediction and management of hydrologic complex systems. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Mind maps and network analysis to evaluate conceptualization of complex issues: A case example evaluating systems science workshops for childhood obesity prevention.

    Frerichs, Leah; Young, Tiffany L; Dave, Gaurav; Stith, Doris; Corbie-Smith, Giselle; Hassmiller Lich, Kristen

    2018-06-01

    Across disciplines, it is common practice to bring together groups to solve complex problems. Facilitators are often asked to help groups organize information about and better understand the problem in order to develop and prioritize solutions. However, despite existence of several methods to elicit and characterize how individuals and groups think about and conceptualize an issue, many are difficult to implement in practice-based settings where resources such as technology and participant time are limited and research questions shift over time. This paper describes an easy-to-implement diagramming technique for eliciting conceptualization and a flexible network analysis method for characterizing changes in both individual and group conceptualization. We use a case example to illustrate how we used the methods to evaluate African American adolescent's conceptual understanding of obesity before and after participating in a series of four systems thinking workshops. The methods produced results that were sensitive to changes in conceptualization that were likely driven by the specific activities employed during the workshop sessions. The methods appear strong for capturing salient levels of conceptualization at both individual and collective levels. The paper concludes with a critical examination of strengths and weaknesses of the methods and implications for future practice and research. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. Sustainable Water Systems for the City of Tomorrow—A Conceptual Framework

    Urban water systems are an example of complex, dynamic human-environment coupled systems, which exhibit emergent behaviors that transcends individual scientific disciplines. While previous siloed approaches to water services (i.e., water resources, drinking water, wastewater, and...

  14. Conceptual frameworks for health systems performance: a quest for effectiveness, quality, and improvement.

    Arah, O.A.; Klazinga, N.S.; Delnoij, D.M.J.; Asbroek, A.H.A. ten; Custers, T.

    2003-01-01

    ISSUES: Countries and international organizations have recently renewed their interest in how health systems perform. This has led to the development of performance indicators for monitoring, assessing, and managing health systems to achieve effectiveness, equity, efficiency, and quality. Although

  15. Conceptual frameworks for health systems performance: a quest for effectiveness, quality, and improvement

    Arah, O. A.; Klazinga, N. S.; Delnoij, D. M. J.; ten Asbroek, A. H. A.; Custers, T.

    2003-01-01

    Issues. Countries and international organizations have recently renewed their interest in how health systems perform. This has led to the development of performance indicators for monitoring, assessing, and managing health systems to achieve effectiveness, equity, efficiency, and quality. Although

  16. Conceptual design of a new supervisory control system for JT-60SA

    Totsuka, Toshiyuki; Sakata, Shinya

    2009-05-01

    The functions of JT-60 discharge control computer system and the data processing computer system will be integrated into a new JT-60SA supervisory control system to improve the operational efficiency of the JT-60 control computer system. In this report, we first show the necessary requirements for the new JT-60SA supervisory control system that should have high cost performance and maintainability. Next, overall system image of the new JT-60SA supervisory control system is presented and the necessary functions and the issues to be solved in the development are shown. Finally, the necessary manpower for this development and performance of the computer hardware, and the expected reduction of maintenance cost of the computer system are described. (author)

  17. Extruded Tunnel Lining System : Phase 1. Conceptual Design and Feasibility Testing.

    1979-09-01

    The Extruded Tunnel Lining System (ETLS) has been conceived as a means of continuously placing the final concrete tunnel lining directly behind a tunnel boring machine. The system will shorten the time required to excavate and line a tunnel section, ...

  18. Conceptual design and implementation of Pulse Automation and Scheduling System for KSTAR

    Lee, Woongryol; Lee, Taegu; Park, Jinseop; Hong, Jaesic; Hahn, Sanghee; Han, Hyunsun; Woo, Minho; Park, Kaprai

    2015-01-01

    Highlights: • The world clock based automatic sequential operation manipulator. • Configuration of the Pulse Automation System (PAS) and the Pulse Scheduling System (PSS) • Providing of operational information in voice through an Ethernet interface. • A perceptional operation status, easy time manipulator, and intuitive man machine interface for the purpose of the Tokamak operation. • Generation of the plasma disruption information. - Abstract: The world clock based automatic sequential operation manipulator has been developed and begin to work on the 7th campaign in KSTAR Tokamak. The Pulse Automation and Scheduling System (PASS) divided into Pulse Automation System (PAS) and Pulse Scheduling System (PSS). The PAS is on the online control system and it has communicated with many other local control systems. Before PASS, the plasma experiment was performed manually by using Central Control System (CCS). However the PASS currently manipulates the sequential operation of KSTAR with the programmed shot interval time. It provides readiness check routine, shot time handler, and local system monitoring functions. The PASS has no hardware dependency and it was configured with EPICS extensions. The Real Time Monitoring System, PCS-GATE, Automatic Reporting System, Central Control System, and Timing Synchronization System are well organized and they communicate to each other. The PASS provides perceptual operation status, easy time manipulator, and intuitive man machine interface. The plasma disruption information which is used in the KSTAR standard software framework also comes from the PASS. We describe the functions and system architecture of the Pulse Automation System in this paper. The PSS will be specified inside PASS for the purpose of intelligent system parameterization.

  19. Conceptual design and implementation of Pulse Automation and Scheduling System for KSTAR

    Lee, Woongryol, E-mail: wrlee@nfri.re.kr; Lee, Taegu; Park, Jinseop; Hong, Jaesic; Hahn, Sanghee; Han, Hyunsun; Woo, Minho; Park, Kaprai

    2015-10-15

    Highlights: • The world clock based automatic sequential operation manipulator. • Configuration of the Pulse Automation System (PAS) and the Pulse Scheduling System (PSS) • Providing of operational information in voice through an Ethernet interface. • A perceptional operation status, easy time manipulator, and intuitive man machine interface for the purpose of the Tokamak operation. • Generation of the plasma disruption information. - Abstract: The world clock based automatic sequential operation manipulator has been developed and begin to work on the 7th campaign in KSTAR Tokamak. The Pulse Automation and Scheduling System (PASS) divided into Pulse Automation System (PAS) and Pulse Scheduling System (PSS). The PAS is on the online control system and it has communicated with many other local control systems. Before PASS, the plasma experiment was performed manually by using Central Control System (CCS). However the PASS currently manipulates the sequential operation of KSTAR with the programmed shot interval time. It provides readiness check routine, shot time handler, and local system monitoring functions. The PASS has no hardware dependency and it was configured with EPICS extensions. The Real Time Monitoring System, PCS-GATE, Automatic Reporting System, Central Control System, and Timing Synchronization System are well organized and they communicate to each other. The PASS provides perceptual operation status, easy time manipulator, and intuitive man machine interface. The plasma disruption information which is used in the KSTAR standard software framework also comes from the PASS. We describe the functions and system architecture of the Pulse Automation System in this paper. The PSS will be specified inside PASS for the purpose of intelligent system parameterization.

  20. General System Theory: Toward a Conceptual Framework for Science and Technology Education for All.

    Chen, David; Stroup, Walter

    1993-01-01

    Suggests using general system theory as a unifying theoretical framework for science and technology education for all. Five reasons are articulated: the multidisciplinary nature of systems theory, the ability to engage complexity, the capacity to describe system dynamics, the ability to represent the relationship between microlevel and…

  1. A Conceptual Level Design for a Static Scheduler for Hard Real-Time Systems

    1988-03-01

    The design of hard real - time systems is gaining a great deal of attention in the software engineering field as more and more real-world processes are...for these hard real - time systems . PSDL, as an executable design language, is supported by an execution support system consisting of a static scheduler, dynamic scheduler, and translator.

  2. Sustainable Water Systems for the City of Tomorrow—A Conceptual Framework

    Xin (Cissy Ma

    2015-09-01

    Full Text Available Urban water systems are an example of complex, dynamic human–environment coupled systems which exhibit emergent behaviors that transcend individual scientific disciplines. While previous siloed approaches to water services (i.e., water resources, drinking water, wastewater, and stormwater have led to great improvements in public health protection, sustainable solutions for a growing global population facing increased resource constraints demand a paradigm shift based on holistic management to maximize the use and recovery of water, energy, nutrients, and materials. The objective of this review paper is to highlight the issues in traditional water systems including water demand and use, centralized configuration, sewer collection systems, characteristics of mixed wastewater, and to explore alternative solutions such as decentralized water systems, fit for purpose and water reuse, natural/green infrastructure, vacuum sewer collection systems, and nutrient/energy recovery. This review also emphasizes a system thinking approach for evaluating alternatives that should include sustainability indicators and metrics such as emergy to assess global system efficiency. An example paradigm shift design for urban water system is presented, not as the recommended solution for all environments, but to emphasize the framework of system-level analysis and the need to visualize water services as an organic whole. When water systems are designed to maximize the resources and optimum efficiency, they are more prevailing and sustainable than siloed management because a system is more than the sum of its parts.

  3. Professional Practice of Medical Training in the E-Learning System: The Conceptual Model Based on a Critical Review

    Zohrehsadat Mirmoghtadaie

    2017-04-01

    Full Text Available Background and Purpose: In education of medical science courses, there has been a growing orientation towards replacing traditional teaching in with E-learning education. Since the modern system of education is based on self-directed learning, e-learning requires special powers to deal with new-emerging challenges and professionally encounter the learning environment. The purpose of the present research is to explain and provide a conceptual model for professional competency in this system.Methods: In this review, different internet and library resources, indexed in Scirus, Pre Quest, Scopus, IEEE, SID, Magiran, Eric, Taylor and Francis, and Google Scholar from 1990 to 2015 were searched using the following keywords: function, manner, ethics, conduct disposition, netiquette, values, academic fraud, moral professionalism, and behavior ine-learning in combination and separately. The Critical Review methodology and Carnwell and Randolph structures were used. The most recent and richest resources that were more relevant to the issue were selected and their information was extracted.Results: Among review of 98 articles, documents of 34 relevant and valid articles were extracted. Based on the results, Digital Literacy, study skills, Cyber Ethics, and Netiquette were considered the main components of scientific and ethical competency in e-learning. 40 components were included in these dimensions.Conclusions: Although there is general interest in e-learning, the target population (learners are not prepared to use such an environment and require strong support. In this paper, we provided a summarized scheme and conceptual pattern fore-learners to move towards promotion of learning.Keywords: PROFESSIONAL FUNCTION, E-LEARNER, E-LEARNING, CRITICAL REVIEW

  4. The ABLe change framework: a conceptual and methodological tool for promoting systems change.

    Foster-Fishman, Pennie G; Watson, Erin R

    2012-06-01

    This paper presents a new approach to the design and implementation of community change efforts like a System of Care. Called the ABLe Change Framework, the model provides simultaneous attention to the content and process of the work, ensuring effective implementation and the pursuit of systems change. Three key strategies are employed in this model to ensure the integration of content and process efforts and effective mobilization of broad scale systems change: Systemic Action Learning Teams, Simple Rules, and Small Wins. In this paper we describe the ABLe Change Framework and present a case study in which we successfully applied this approach to one system of care effort in Michigan.

  5. The conceptual design of a hybrid life support system based on the evaluation and comparison of terrestrial testbeds

    Czupalla, M.; Horneck, G.; Blome, H. J.

    This report summarizes a trade study of different options of a bioregenerative Life Support System (LSS) and a subsequent conceptual design of a hybrid LSS. The evaluation was based mainly on the terrestrial testbed projects MELISSA (ESA) and BIOS (Russia). In addition, some methods suggested by the Advanced Life Support Project (NASA) were considered. Computer models, including mass flows were established for each of the systems with the goal of closing system loops to the extent possible. In order to cope with the differences in the supported crew size and provided nutrition, all systems were scaled for supporting a crew of six for a 780 day Mars mission (180 days transport to Mars; 600 days surface period) as given in the NASA Design Reference Mission Scenario [Hoffman, S.J., Kaplan, D.L. Human exploration of Mars: the Reference Mission of the NASA Mars Exploratory Study, 1997]. All models were scaled to provide the same daily allowances, as of calories, to the crew. Equivalent System Mass (ESM) analysis was used to compare the investigated system models against each other. Following the comparison of the terrestrial systems, the system specific subsystem options for Food Supply, Solid Waste Processing, Water Management and Atmosphere Revitalization were evaluated in a separate trade study. The best subsystem technologies from the trade study were integrated into an overall design solution based on mass flow relationships. The optimized LSS is mainly a bioregenerative system, complemented by a few physico-chemical elements, with a total ESM of 18,088 kg, which is about 4 times higher than that of a pure physico-chemical LSS, as designed in an earlier study.

  6. Space Power Program, Instrumentation and Control System Architecture, Pre-conceptual Design, for Information

    JM Ross

    2005-10-20

    The purpose of this letter is to forward the Prometheus preconceptual Instrumentation and Control (I&C) system architecture (Enclosure (1)) to NR for information as part of the Prometheus closeout work. The preconceptual 1&C system architecture was considered a key planning document for development of the I&C system for Project Prometheus. This architecture was intended to set the technical approach for the entire I&C system. It defines interfaces to other spacecraft systems, defines hardware blocks for future development, and provides a basis for accurate cost and schedule estimates. Since the system requirements are not known at this time, it was anticipated that the architecture would evolve as the design of the reactor module was matured.

  7. Conceptual design of a 1.5-MJ, 2-Hz KrF fusion laser system

    Caird, J.; Allen, W.O.; Hipkin, H.G.

    1980-12-01

    The report consists of two major elements: Section II presents an overview of the design study and discusses the major results and conclusions derived from this study; and Section III provides details of the technical analyses and results and presents technical summaries that discuss e-beam pulsed-power conditioning, optical-system design, mechanical-systems design, facilities, overall laser-system efficiency, and capital costs

  8. Conceptual design and analysis of a Dish-Rankine solar thermal power system

    Pons, R. L.

    1980-08-01

    A Point Focusing Distributed Receiver (PFDR) solar thermal electric system which employs small Organic Rankine Cycle (ORC) engines is examined with reference to its projected technical/economic performance. With mass-produced power modules (about 100,000 per year), the projected life-cycle energy cost for an optimized no-storage system is estimated at 67 mills/kWh (Levelized Busbar Energy Cost) without the need for advanced development of any of its components. At moderate production rates (about 50 MWe/yr) system energy costs are competitive with conventional power generation systems in special remote-site types of applications.

  9. Design Features for Linguistically-Mediated Meaning Construction: The Relative Roles of the Linguistic and Conceptual Systems in Subserving the Ideational Function of Language.

    Evans, Vyvyan

    2016-01-01

    Recent research in language and cognitive science proposes that the linguistic system evolved to provide an "executive" control system on the evolutionarily more ancient conceptual system (e.g., Barsalou et al., 2008; Evans, 2009, 2015a,b; Bergen, 2012). In short, the claim is that embodied representations in the linguistic system interface with non-linguistic representations in the conceptual system, facilitating rich meanings, or simulations, enabling linguistically mediated communication. In this paper I build on these proposals by examining the nature of what I identify as design features for this control system. In particular, I address how the ideational function of language-our ability to deploy linguistic symbols to convey meanings of great complexity-is facilitated. The central proposal of this paper is as follows. The linguistic system of any given language user, of any given linguistic system-spoken or signed-facilitates access to knowledge representation-concepts-in the conceptual system, which subserves this ideational function. In the most general terms, the human meaning-making capacity is underpinned by two distinct, although tightly coupled representational systems: the conceptual system and the linguistic system. Each system contributes to meaning construction in qualitatively distinct ways. This leads to the first design feature: given that the two systems are representational-they are populated by semantic representations-the nature and function of the representations are qualitatively different. This proposed design feature I term the bifurcation in semantic representation. After all, it stands to reason that if a linguistic system has a different function, vis-à-vis the conceptual system, which is of far greater evolutionary antiquity, then the semantic representations will be complementary, and as such, qualitatively different, reflecting the functional distinctions of the two systems, in collectively giving rise to meaning. I consider the

  10. Conceptual Design of the Cryogenic System for the High-luminosity Upgrade of the Large Hadron Collider (LHC)

    Brodzinski, K.; Claudet, S.; Ferlin, G.; Tavian, L.; Wagner, U.; Van Weelderen, R.

    The discovery of a Higgs boson at CERN in 2012 is the start of a major program of work to measure this particle's properties with the highest possible precision for testing the validity of the Standard Model and to search for further new physics at the energy frontier. The LHC is in a unique position to pursue this program. Europe's top priority is the exploitation of the full potential of the LHC, including the high-luminosity upgrade of the machine and detectors with an objective to collect ten times more data than in the initial design, by around 2030. To reach this objective, the LHC cryogenic system must be upgraded to withstand higher beam current and higher luminosity at top energy while keeping the same operation availability by improving the collimation system and the protection of electronics sensitive to radiation. This paper will present the conceptual design of the cryogenic system upgrade with recent updates in performance requirements, the corresponding layout and architecture of the system as well as the main technical challenges which have to be met in the coming years.

  11. Conceptual Model-based Systems Biology: mapping knowledge and discovering gaps in the mRNA transcription cycle.

    Judith Somekh

    2012-12-01

    Full Text Available We propose a Conceptual Model-based Systems Biology framework for qualitative modeling, executing, and eliciting knowledge gaps in molecular biology systems. The framework is an adaptation of Object-Process Methodology (OPM, a graphical and textual executable modeling language. OPM enables concurrent representation of the system's structure-the objects that comprise the system, and behavior-how processes transform objects over time. Applying a top-down approach of recursively zooming into processes, we model a case in point-the mRNA transcription cycle. Starting with this high level cell function, we model increasingly detailed processes along with participating objects. Our modeling approach is capable of modeling molecular processes such as complex formation, localization and trafficking, molecular binding, enzymatic stimulation, and environmental intervention. At the lowest level, similar to the Gene Ontology, all biological processes boil down to three basic molecular functions: catalysis, binding/dissociation, and transporting. During modeling and execution of the mRNA transcription model, we discovered knowledge gaps, which we present and classify into various types. We also show how model execution enhances a coherent model construction. Identification and pinpointing knowledge gaps is an important feature of the framework, as it suggests where research should focus and whether conjectures about uncertain mechanisms fit into the already verified model.

  12. Exploring Enterprise Systems and Management Control in the Information Society: Developing a Conceptual Framework

    Rikhardsson, Pall M.; Rohde, Carsten; Rom, Anders

    Society is evolving from the industrial society towards the information society where information technology plays a crucial role. Few IT innovations have had as much impact on business organizations in the past years as Enterprise Systems (ES). These systems affect most functions in the organiza...

  13. Conceptualizing Climate Change in the Context of a Climate System: Implications for Climate and Environmental Education

    Shepardson, Daniel P.; Niyogi, Dev; Roychoudhury, Anita; Hirsch, Andrew

    2012-01-01

    Today there is much interest in teaching secondary students about climate change. Much of this effort has focused directly on students' understanding of climate change. We hypothesize, however, that in order for students to understand climate change they must first understand climate as a system and how changes to this system due to both natural…

  14. Socio-ecological niche: A conceptual framework for integration of legumes in smallholder farming systems

    Ojiem, J.O.; Ridder, de N.; Vanlauwe, B.; Giller, K.E.

    2006-01-01

    There are numerous examples of technologies with great potential that have not been accepted by smallholder farmers. Quite often, these technologies do not fit well into smallholder systems due to the inherent high level of heterogeneity of these systems. For example, despite their great potential,

  15. Study on the Behaviors of a Conceptual Passive Containment Cooling System

    Jianjun Wang

    2014-01-01

    Full Text Available The containment is an ultimate and important barrier to mitigate the consequences after the release of mass and energy during such scenarios as loss of coolant accident (LOCA or main steam line break (MSLB. In this investigation, a passive containment cooling system (PCCS concept is proposed for a large dry concrete containment. The system is composed of series of heat exchangers, long connecting pipes with relatively large diameter, valves, and a water tank, which is located at the top of the system and serves as the final heat sink. The performance of the system is numerically studied in detail under different conditions. In addition, the influences of condensation heat transfer conditions and containment environment temperature conditions are also studied on the behaviors of the system. The results reveal that four distinct operating stages could be experienced as follows: startup stage, single phase quasisteady stage, flashing speed-up transient stage, and flashing dominated quasisteady operating stage. Furthermore, the mechanisms of system behaviors are thus analyzed. Moreover, the feasibility of the system is also discussed to meet the design purpose for the containment integrity requirement. Considering the passive feature and the compactness of the system, the proposed PCCS is promising for the advanced integral type reactor.

  16. Towards a conceptual model to measure effectiveness of food quality systems

    Spiegel, van der M.; Luning, P.A.; Ziggers, G.W.; Jongen, W.M.F.

    2003-01-01

    In the food industry quality assurance (QA) systems such as GMP, HACCP, ISO and BRC, are applied for assuring food quality. However, it is still unknown to what extent these QA systems contribute to the realization of quality. Therefore, an instrument is required that measures the effectiveness of

  17. The Re-Conceptualization of the Port Supply Chain as a Smart Port Service System: The Case of the Port of Salerno

    Antonio Botti

    2017-04-01

    Full Text Available This paper proposes a re-conceptualization of the port supply chain as a smart service system, in accordance with the theory of service science. Starting from a short literature review about the port supply chain approach and service science, a new comprehensive framework is provided to better understand seaport dynamics and the creation of competitive port supply chains. The methodology used is the case study approach. The Authors examined the Port of Salerno (Italy and re-conceptualized it as a smart port service system. The originality of the work lies in the application of service science as a lens to re-conceptualize the port supply chain, that allows the implementation of a logistic framework. Both theoretical and practical implications are provided to enrich the literature about port supply chains and to support port operators.

  18. Conceptual design of the blanket and power conversion system for a mirror hybrid fusion-fission reactor. 12-month progress report, July 1, 1975--June 30, 1976

    Schultz, K.R.; Baxi, C.B.; Rao, R.

    1976-01-01

    This report presents the conceptual design and preliminary feasibility assessment for the hybrid blanket and power conversion system of the Mirror Hybrid Fusion-Fission Reactor. Existing gas-cooled fission reactor technology is directly applicable to the Mirror Hybrid Reactor. There are a number of aspects of the present conceptual design that require further design and analysis effort. The blanket and power conversion system operating parameters have not been optimized. The method of supporting the blanket modules and the interface between these modules and the primary loop helium ducting will require further design work. The means of support and containment of the primary loop components must be studied. Nevertheless, in general, the conceptual design appears quite feasible

  19. Assessment of a Conceptual Flap System Intended for Enhanced General Aviation Safety

    Campbell, Bryan A.; Carter, Melissa B.

    2017-01-01

    A novel multielement trailing-edge flap system for light general aviation airplanes was conceived for enhanced safety during normal and emergency landings. The system is designed to significantly reduce stall speed, and thus approach speed, with the goal of reducing maneuveringflight accidents and enhancing pilot survivability in the event of an accident. The research objectives were to assess the aerodynamic performance characteristics of the system and to evaluate the extent to which it provided both increased lift and increased drag required for the low-speed landing goal. The flap system was applied to a model of a light general aviation, high-wing trainer and tested in the Langley 12- Foot Low-Speed Wind Tunnel. Data were obtained for several device deflection angles, and component combinations at a dynamic pressure of 4 pounds per square foot. The force and moment data supports the achievement of the desired increase in lift with substantially increased drag, all at relatively shallow angles of attack. The levels of lift and drag can be varied through device deflection angles and inboard/outboard differential deflections. As such, it appears that this flap system may provide an enabling technology to allow steep, controllable glide slopes for safe rapid descent to landing with reduced stall speed. However, a simple flat-plate lower surface spoiler (LSS) provided either similar or superior lift with little impact on pitch or drag as compared to the proposed system. Higher-fidelity studies are suggested prior to use of the proposed system.

  20. Pre-Conceptual Design for Northstar ⁹⁹Mo Process Tritium Removal System

    Nobile, Arthur [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Reichert, Heidi [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hollis, William Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Taylor, Craig Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gordon, John Cameron [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dale, Gregory E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-12

    In this report we describe a preliminary concept for a Tritium Removal System (TRS) to remove tritium that is generated in the ⁹⁹Mo production process. Preliminary calculations have been performed to evaluate an approximate size for the system. The concept described utilizes well-established detritiation technology based on catalytic oxidation of tritium and tritiated hydrocarbons to water in a high temperature (400 °C) reactor and capture of water in a molecular sieve bed. The TRS concept involves use of a single system that would cycle through each of the seven online target systems and remove tritium that has been accumulated after one week’s run time. The TRS would perform cleanup operations on each target system for a period of approximately 24 hours. This would occur while the system is still online and just prior to target replacement, so tritium levels would at their minimum values for target replacement. In the concept, during normal operation a small fraction (1%) of the helium recirculating in the system would be diverted through the TRS and returned to the flow loop. With this approach sufficient levels of detritiation can be accomplished in a 24 hour period. In the study it was found that because of the need to maintain low oxygen levels in the system (<100 ppm) this increases the size of the catalytic reactor. As a result of this finding, consideration should be given to other methods for removing tritium from the system. Other methods such as catalytic exchange of tritium with an unsaturated organic compound and subsequent trapping on activated carbon or molecular sieve could offer advantages of reducing reactor size and operation at lower reactor temperature. However the most significant advantage of such an approach would be the ability to operate in very low oxygen environments, which would eliminate any concerns for oxidation of the target.

  1. Modeling and simulation in the design and evaluation of conceptual safeguards systems

    Cobb, D.D.; Smith, D.B.

    1977-01-01

    Recent work in modeling nuclear fuel-cycle processes and the materials measurement and accountability portion of integrated safeguards systems is summarized. Process variability, especially in the levels of in-process holdup and in scrap and waste sidestreams, impacts significantly on the design of dynamic materials accounting and control systems. In the absence of operating data from modern facilities, detailed dynamic models of process operation are required in order to evaluate systems design concepts. Numerical data are presented from the simulated operation of major portions of spent fuel reprocessing, plutonium nitrate-to-oxide conversion, and mixed-oxide fuel-fabrication processes

  2. Scarcity and the future of politics. [Conceptualizing political system as resource-distribution mechanism

    Orr, D W

    1976-06-01

    Assuming that a political system is a resource-distribution mechanism, the author examines the possible effects of the predicted new age of scarcity on the system built on the assumption of continuing abundance of both energy and resource stocks. He does this by examining generally the relationship between the carrying capacity (along a scarcity and abundance continuum) and the value system (along a steady-state and growth-oriented continuum), and showing the possible outcomes of the interaction between the two. 35 references.

  3. Comparison of Models Needed for Conceptual Design of Man-Machine Systems in Different Application Domains

    Rasmussen, Jens

    1986-01-01

    and subjective preferences. For design of man-machine systems in process control, a framework has been developed in terms of separate representation of the problem domain, the decision task, and the information processing strategies required. The author analyzes the application of this framework to a number......For systematic and computer-aided design of man-machine systems, a consistent framework is needed, i. e. , a set of models which allows the selection of system characteristics which serve the individual user not only to satisfy his goal, but also to select mental processes that match his resources...

  4. Context-Aware Mobile Collaborative Systems: Conceptual Modeling and Case Study

    Luis G. Montané-Jiménez

    2012-10-01

    Full Text Available A Mobile Collaborative System (MCOS enable the cooperation of the members of a team to achieve a common goal by using a combination of mobile and fixed technologies. MCOS can be enhanced if the context of the group of users is considered in the execution of activities. This paper proposes a novel model for Context-Aware Mobile COllaborative Systems (CAMCOS and a functional architecture based on that model. In order to validate both the model and the architecture, a prototype system in the tourism domain was implemented and evaluated.

  5. Conceptual design of a remote system for characterizing oilsands tailings deposits

    Lipsett, M.G.; Rivard, B. [Alberta Univ., Edmonton, AB (Canada). Dept. of Mechanical Engineering; Alberta Univ., Edmonton, AB (Canada). Dept. of Earth and Atmospheric Sciences

    2010-07-01

    This PowerPoint presentation described the design of a remote system for characterizing oil sands tailings deposits. The wheeled mobile robot technology was developed in order to improve the trafficability of composite tailings (CT) and other engineering tailings deposits, as well as to identify differences in feedstocks and process performance, and to determine shear strength losses from dynamic loading. The technology was comprised of a spectroscopy component, and a mobile robot equipped with surface measurement sensors. The control system included navigation and traction control devices. A communication component was also included. Tools used in the system included a penetrometer, a viscosimeter, and an automatic sample collection device. Tests have been conducted to determine the system's driving ability. Further tests are being conducted to evaluate the performance of the robot sensors and controllers. tabs., figs.

  6. Physical systems conceptual pathways between flat space-time and matter

    Belkind, Ori

    2012-01-01

    This book offers a new philosophical interpretation of classical mechanics and the Special Theory of Relativity, in which motions of parts and wholes of physical systems are taken to be fundamental, prior to spacetime, material properties and laws of motion.

  7. CONCEPTUALIZING ISLAMIC BASED EDUCATION: An attempt toward Islamization of Educational System in Aceh

    Hasan Basri

    2015-02-01

    Full Text Available This study proves that Islam has a unique concept of education and constructive values that can be applied in educational system. Discussion on Islamic education has not ended yet; that is why to reveal the Islamic educational values deriving from the primary sources of Islam, the Qur’an and Sunna (prophetic tradition, is not insignificant in the context of educational system in Aceh. Since Aceh has specific privilege in the fields of education, religion, and culture, it is crucial to break up earth the Islamic values and apply them into education programs. Realizing such programs should take accurate and strategic steps through islamization of education, integration of values, and internationalization of way of thinking. Besides, curriculum, method, system, policy, and dichotomy of educational system must be reformed concurrently.

  8. Development of a conceptual framework toward an integrated transportation system (continued).

    2011-07-01

    As a continuing effort documented in the first phase project UMAR19-13, this research focuses : on the design of a prototype application under the framework toward an Integrated : Transportation System. More specifically, this research aims at improv...

  9. Conceptual design of the CEM design of the data acquisition system

    Bowden, M.; Dorenbosch, J.; Kapoor, V.

    1993-06-01

    The design of a large scale data acquisition system for the GEM detector at the Superconducting Super Collider (SSC) is presented. This architecture supports high-bandwidth data transfer using parallel point-to-point links and a scalable switching network. Substantial buffering enables the use of high latency, selective triggering based on either hardware or software implementations. The system throughput can be expanded to greater than 40 Gbps per second at trigger rates of 100 KHz

  10. Artificial intelligence in conceptual design of intelligent manufacturing systems: A state of the art review

    Petrović, Milica M.; Miljković, Zoran Đ.; Babić, Bojan R.

    2013-01-01

    Intelligent manufacturing systems (IMS), as the highest class of flexible manufacturing systems, are able to adapt to market changes applying methods of artificial intelligence. This paper presents a detailed review of the following IMS functions: (i) process planning optimization, (ii) scheduling optimization, (iii) integrated process planning and scheduling, and (iv) mobile robot scheduling for internal material transport tasks. The research presented in this paper shows that improved perfo...

  11. Conceptual design study on simplified and safer cooling systems for sodium cooled FBRs

    Hayafune, Hiroki; Shimakawa, Yoshio; Ishikawa, Hiroyasu; Kubota, Kenichi; Kobayashi, Jun; Kasai, Shigeo

    2000-06-01

    The objective of this study is to create the FBR plant concepts increasing economy and safety for the Phase-I 'Feasibility Studies on Commercialized Fast Reactor System'. In this study, various concepts of simplified 2ry cooling system for sodium cooled FBRs are considered and evaluated from the view points of technological feasibility, economy, and safety. The concepts in the study are considered on the basis of the following points of view. 1. To simplify 2ry cooling system by moderating and localizing the sodium-water reaction in the steam generator of the FBRs. 2. To simplify 2ry cooling system by eliminating the sodium-water reaction using integrated IHX-SG unit. 3. To simplify 2ry cooling system by eliminating the sodium-water reaction using a power generating system other than the steam generator. As the result of the study, 12 concepts and 3 innovative concepts are proposed. The evaluation study for those concepts shows the following technical prospects. 1. 2 concepts of integrated IHX-SG unit can eliminate the sodium-water reaction. Separated IHX and SG tubes unit using Lead-Bismuth as the heat transfer medium. Integrated IHX-SG unit using copper as the heat transfer medium. 2. Cost reduction effect by simplified 2ry cooling system using integrated IHX-SG unit is estimated 0 to 5%. 3. All of the integrated IHX-SG unit concepts have more weight and larger size than conventional steam generator unit. The weight of the unit during transporting and lifting would limit capacity of heat transfer system. These evaluation results will be compared with the results in JFY 2000 and used for the Phase-II study. (author)

  12. A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems

    De Araujo , Luciano Fonseca; De Queiroz , Abelardo Alves

    2009-01-01

    International audience; This paper explains an implementation model for a new method for Production Leveling designed for batch production system. The main structure of this model is grounded on three constructs: traditional framework for Operations Planning, Lean Manufacturing concepts for Production Leveling and case study guidelines. By combining the first and second construct, a framework for Production Leveling has been developed for batch production systems. Then, case study guidelines ...

  13. CONCEPTUAL BASES OF THE ENERGY EFFICIENT SYSTEM OF MANAGEMENT OF COMBINED UNITS OF WASTEWATER TREATMENT

    V. N. Shtepa

    2016-01-01

    Full Text Available A critical analysis of the shortcomings of the existing water purification systems is conducted. In order to ensure environmental safety and energy savings it is proposed to use the combined units, including physical, chemical, physical-and-chemical and biological methods. The attention is driven to the fact that the most effective way to maintain current water purification is an adaptive control system. The shortcomings of the management of water treatment units were revealed and it was proposed to produce their synthesis based on the mathematical apparatus of artificial intelligence systems. Taking into account the requirements of the environmental safety and the need in the energy savings, the energy efficiency criteria of combined system functioning has been developed. At an industrial plant (slaughterhouse wastewater treatment the compliance of the production conditions of the criterion has been undertaken that confirmed the criterion relevance and usefulness as applied to the synthesis of energy-efficient control systems. A synthetic control system combined the water treatment plants. Having based on the preliminary research and analysis of the current work in the subject area the architecture of a control system of combined water treatment units that use intelligent technology was developed. The key functional of the unit – information-analytical subsystem of the formation control actions including: multilayer perceptrons self-organization Kohonen network, fuzzy cognitive map. The basic difference between the developed design and its analogues is the ability to adjust the settings of equipment adaptively on the basis of processing sensor data, information on the price of consumables, volley discharges of pollutants, a sudden change in the flow and other force majeure. Adjustment of the parameters of the control system is carried out with the use of experimental and analytical data stored in the knowledge base of technological

  14. Design Considerations and Conceptual Designs for Surface Nuclear Power Systems for the Moon and Mars

    Blessing, David L.; Kirkland, Joel

    2006-01-01

    A set of design considerations is proposed for nuclear power systems to provide power on the Moon or Mars. Setting the initial requirements is extremely important since they govern the choices that determine the final design. In addition, the choice of reactor and its operating conditions depends on details of the energy conversion and heat rejection systems, which must be studied in tandem. Refractory materials are not suitable for the primary pressure boundary for the reactor due to their susceptibility to chemical attack from particles of regolith on the Moon and Mars or by the carbon dioxide atmosphere on Mars. High nickel superalloys would be acceptable in these environments, but their limited creep strength at elevated temperatures limits reactor outlet temperature to about 1150 K or less. This temperature restriction results in the mass of a gas cooled reactor coupled to a Brayton power conversion system being somewhat lighter than that of a liquid metal-cooled reactors coupled to a Brayton power conversion system. The mass of a liquid metal-cooled reactor coupled to an advanced Stirling power conversion system would be in between that of the gas and liquid metal cooled systems which use Brayton power conversion

  15. Conceptual and numerical modelling of radionuclide transport in near-surface systems at Forsmark. SR-Site Biosphere

    Pique, Angels; Grandia, Fidel; Sena, Clara; Arcos, David; Molinero, Jorge; Duro, Lara; Bruno, Jordi

    2010-11-01

    In the framework of the SR-Site safety assessment, a conceptual and numerical modelling of radionuclide reactive transport in near-surface systems (including till and clay systems) at Forsmark has been carried out. The objective was to evaluate the retention capacity of the near-surface systems, composed of Quaternary deposits, which would be the last natural barrier for an eventual radionuclide release from the deep repository prior to reaching the biosphere. The studied radionuclides are 14 C, 129 I, 36 Cl, 94 Nb, 59 Ni, 93 Mo, 79 Se, 99 Tc, 230 Th, 90 Sr, 226 Ra, 135 Cs and U. Conceptual description and numerical simulations of radionuclide reactive transport show that cation exchange and surface complexation on illite are active processes for the retention of several radionuclides (U, Th, Ni, Cs, Sr, Ra). Surface complexation on iron hydroxide is an active process in the till system, able to effectively retain U and Ni. Another retention process of importance is the incorporation of the radionuclides into mineral phases, either by the precipitation of pure phases or solid solutions. Quantitative modelling has been useful to illustrate the incorporation of C and Sr in the carbonate solid solution in the considered model domains (till and clay), as well as the precipitation of uraninite in the clay sediments and the precipitation of native selenium and radiobarite in the till. Other mineral phases that could, a priori, retain U, Se, Nb and Tc do not precipitate in the simulations, either due to the pH-Eh conditions and/or because the dissolved concentration of the element is not high enough under the considered simulation conditions. It is important to keep in mind that changes in these parameters and in the boundary conditions could modify the predicted behaviour of these elements. The radionuclides that are most significantly retarded are Th, Ni and Cs, mainly through sorption onto illite. Therefore, if the amount of illite (or available sorption sites

  16. Conceptual and numerical modelling of radionuclide transport in near-surface systems at Forsmark. SR-Site Biosphere

    Pique, Angels; Grandia, Fidel; Sena, Clara; Arcos, David; Molinero, Jorge; Duro, Lara; Bruno, Jordi (Amphos21 Consulting S.L., Barcelona (Spain))

    2010-11-15

    In the framework of the SR-Site safety assessment, a conceptual and numerical modelling of radionuclide reactive transport in near-surface systems (including till and clay systems) at Forsmark has been carried out. The objective was to evaluate the retention capacity of the near-surface systems, composed of Quaternary deposits, which would be the last natural barrier for an eventual radionuclide release from the deep repository prior to reaching the biosphere. The studied radionuclides are 14C, 129I, 36Cl, 94Nb, 59Ni, 93Mo, 79Se, 99Tc, 230Th, 90Sr, 226Ra, 135Cs and U. Conceptual description and numerical simulations of radionuclide reactive transport show that cation exchange and surface complexation on illite are active processes for the retention of several radionuclides (U, Th, Ni, Cs, Sr, Ra). Surface complexation on iron hydroxide is an active process in the till system, able to effectively retain U and Ni. Another retention process of importance is the incorporation of the radionuclides into mineral phases, either by the precipitation of pure phases or solid solutions. Quantitative modelling has been useful to illustrate the incorporation of C and Sr in the carbonate solid solution in the considered model domains (till and clay), as well as the precipitation of uraninite in the clay sediments and the precipitation of native selenium and radiobarite in the till. Other mineral phases that could, a priori, retain U, Se, Nb and Tc do not precipitate in the simulations, either due to the pH-Eh conditions and/or because the dissolved concentration of the element is not high enough under the considered simulation conditions. It is important to keep in mind that changes in these parameters and in the boundary conditions could modify the predicted behaviour of these elements. The radionuclides that are most significantly retarded are Th, Ni and Cs, mainly through sorption onto illite. Therefore, if the amount of illite (or available sorption sites) decreases, the

  17. Conceptual design of the handling and storage system of the spent target vessel for neutron scattering facility 2

    Adachi, Junichi; Kaminaga, Masanori; Sasaki, Shinobu; Haga, Katsuhiro; Aso, Tomokazu; Kinoshita, Hidetaka; Hino, Ryutaro

    2002-01-01

    In designing the neutron scattering facility, a spent target vessel should be replaced with remote handling devices in order to protect radioactive exposure, since it would be highly activated through the high energy neutron irradiation caused by the spallation reaction between mercury of the target material and the MW-class proton beam. In the storage of the spent target vessel, it is necessary to consider decay heat of the target vessel and mercury contamination caused by vaporization of the residual mercury in the vessel. A conceptual design has been carried out to establish basic concept and to clarify its specification of main equipments on handling and storage systems for the spent target vessel. This report presents the basic concept and a system plot plan based on latest design works of remote handling devices such as a spent target vessel storage cask and a target vessel exchange trolley, which aim at reasonability and simplification. In addition, storage systems for the spent moderator vessel, the spent proton beam window and the spent reflector vessel are also investigated based on the plot plan. (author)

  18. The conceptual design of the sensing system for patrolling and inspecting a nuclear facility by the intelligent robot

    Ebihara, Ken-ichi

    1993-11-01

    Supposing that an intelligent robot, instead of a human worker, patrols and inspects nuclear facilities, it is indispensable for such robot to be capable of moving with avoiding obstacles and recognizing various abnormal conditions, carrying out some ordered works based on information from sensors mounted on the robot. The present robots being practically used in nuclear facilities, however, have the limited capability such as identifying a few specific abnormal conditions using data detected by specific sensors on them. Hence, a conceptual design of a sensor-fusion-based system, which is named 'sensing system', has been performed to collect various kinds of information required for patrol and inspection. This sensing system combines a visual sensor, which consists of a monocular camera and a range finder by the active stereopsis method, an olfactory, acoustic and dose sensors. This report describes the hardware configuration and the software function for processing sensed data. An idea of sensor fusion and the preliminary consideration in respect of applying the neural network to image data processing are also described. (author)

  19. Novel/conceptual floating pulsatile system using high internal phase emulsion based porous material intended for chronotherapy.

    Sher, Praveen; Ingavle, Ganesh; Ponrathnam, Surendra; Benson, James R; Li, Nai-Hong; Pawar, Atmaram P

    2009-01-01

    The aim of the present study was to design a novel/conceptual delivery system using ibuprofen, anticipated for chronotherapy in arthritis with porous material to overcome the formulation limits (multiple steps, polymers, excipients) and to optimize drug loading for a desired release profile suitable for in vitro investigations. The objective of this delivery system lies in the availability of maximum drug amount for absorption in the wee hours as recommended. Drug loading using 3(2) factorial design on porous carrier, synthesized by high internal phase emulsion technique using styrene and divinylbenzene, was done via solvent evaporation using methanol and dichloromethane. The system was evaluated in vitro for drug loading, encapsulation efficiency, and surface characterization by scanning electron, atomic force microscopy, and customized drug release study. This study examined critical parameters such as solvent volume, drug amount, and solvent polarity on investigations related to drug adsorption and release mostly favoring low-polarity solvent dichloromethane. Overall release in all batches ranged 0.98-52% in acidic medium and 71-94% in basic medium. These results exhibit uniqueness in achieving the least drug release of 0.98%, an ideal one, without using any release modifiers, making it distinct from other approaches/technologies for time and controlled release and for chronotherapy.

  20. Conceptualization and validation of an open-source closed-loop deep brain stimulation system in rat.

    Wu, Hemmings; Ghekiere, Hartwin; Beeckmans, Dorien; Tambuyzer, Tim; van Kuyck, Kris; Aerts, Jean-Marie; Nuttin, Bart

    2015-04-21

    Conventional deep brain stimulation (DBS) applies constant electrical stimulation to specific brain regions to treat neurological disorders. Closed-loop DBS with real-time feedback is gaining attention in recent years, after proved more effective than conventional DBS in terms of pathological symptom control clinically. Here we demonstrate the conceptualization and validation of a closed-loop DBS system using open-source hardware. We used hippocampal theta oscillations as system input, and electrical stimulation in the mesencephalic reticular formation (mRt) as controller output. It is well documented that hippocampal theta oscillations are highly related to locomotion, while electrical stimulation in the mRt induces freezing. We used an Arduino open-source microcontroller between input and output sources. This allowed us to use hippocampal local field potentials (LFPs) to steer electrical stimulation in the mRt. Our results showed that closed-loop DBS significantly suppressed locomotion compared to no stimulation, and required on average only 56% of the stimulation used in open-loop DBS to reach similar effects. The main advantages of open-source hardware include wide selection and availability, high customizability, and affordability. Our open-source closed-loop DBS system is effective, and warrants further research using open-source hardware for closed-loop neuromodulation.

  1. MACROPRUDENTIAL POLICY: CONCEPTUAL POSITIONS

    Radu CUHAL; Ludmila STARIŢÎNA; Nicolae BASISTÎI

    2013-01-01

    The article explains the conceptual principles of macroprudential policy, its main objectives and instruments. The classification of macroprudential policy tools of the Committee on the Global Financial System is defined. The comparative characteristics of macro-prudential policy in the Western developed countries are also examined.

  2. Macroprudential policy: conceptual positions

    Stariţîna Ludmila; Cuhal Radu

    2013-01-01

    The article explains the conceptual principles of macroprudential policy, its main objectives and instruments. The classification of macroprudential policy tools of the Committee on the Global Financial System is defined. The comparative characteristics of macro-prudential policy in the Western developed countries are also examined.

  3. Conceptual study of a complementary scram system for liquid metal cooled nuclear reactors

    Vanmaercke, S.; Van den Eynde, G.; Tijskens, E.; Bartosiewicz, Y.

    2009-01-01

    GEN-IV reactors promise higher safety and reliability as one of the major improvements over previous generations of reactors. To achieve that, all GEN-IV reactor concepts require two completely independent shutdown systems that rely on different operating principles. For liquid metal cooled reactors the first system is an absorber-rod based solution. The second system that by requirement should rely on another principle, is however quite a challenge to design. The second system used in current PWR reactors is to dissolve a neutron absorber, boric acid, into the primary coolant. This method cannot be used in liquid metal cooled reactors because of the high cost of cleaning the coolant. In this paper an overview of the existing literature on scram systems is given, each with their advantages and limitations. A promising new concept is also presented. This concept leads to a totally passive self activating device using small absorbing particles that flow into a dedicated channel to shutdown the reactor. The system consists of tubes filled with particles of an absorber material. During normal operation, these particles are kept above the active core by means of a metallic seal. In case of an accident, the system is activated by the temperature increase in the coolant. This leads to melting of the metal seal. The ongoing work conducted at SCK·CEN and UCL/TERM aims at assessing the reliability of this new concept both experimentally and numerically. This study is multidisciplinary as neutronic and thermal hydraulics issues are tackled. Most challenging is however the thermal hydraulics related to understanding and predicting the liberation and flow of the absorber particles during a shutdown. Simple experiments are envisaged to compare to numerical simulations using the Discrete Element Method for simulating the particles. In a later stage this will be coupled with Smoothed Particles Hydrodynamics for simulating the melting of the seal. Some preliminary experimental and

  4. Conceptual design of a hybrid KrF laser system for ICF commercial applications

    Harris, D.B.; Lowenthal, D.D.

    1986-01-01

    KrF lasers appear to be the most efficient lasers operating near the optimal wavelength for laser fusion. Most high-efficiency, low-cost KrF laser designs use large electron-beam-driven amplifiers and use pure angular multiplexing for the required pulse compression. A recent study carried out by Los Alamos National Lab. and Spectra Technology has defied a high-efficiency hybrid KrF laser system architecture that uses both angular multiplexing and Raman beam combination. The high overall system efficiency of this hybrid design, ∼ 12%, is achieved primarily through the use of electron-beam sustained discharge lasers (EBSDL), and by using the efficient forward rotational Raman process in hydrogen. The new system appears attractive as a commercial-applications driver because the calculated efficiency is higher than the usual large electron-beam-pumped (EBP) KrF laser/pure angular multiplexing approach. In this paper, the hybrid system architecture will be described, and the trade-offs with respect to the large EBP amplifier/angular multiplexed system will be discussed

  5. Conceptual design of a hybrid KrF laser system for ICF commercial applications

    Harris, D.B.; Lowenthal, D.D.

    1986-01-01

    KrF lasers appear to be the most efficient lasers operating near the optimal wavelength for laser fusion. Most high-efficiency, low-cost KrF laser designs use large electron-beam driven amplifiers and use pure angular multiplexing for the required pulse compression. A recent study carried out by Los Alamos and Spectra Technology has defined a high-efficiency hybrid KrF laser system architecture that uses both angular multiplexing and Raman beam combination. The high overall system efficiency of this hybrid design, approximately 12%, is achieved primarily through the use of e-beam sustained discharge lasers (EBSDL), and by using the efficient forward rotational Raman process in hydrogen. The new system appears attractive as a commercial-applications driver because the calculated efficiency is higher than the usual large e-beam pumped (EBP) KrF laser/pure angular multiplexing approach. In this paper, the hybrid system architecture is described, and the tradeoffs with respect to the large EBP amplifier/angular multiplexed system are discussed

  6. Conceptual Design of Liquid Sodium Charging and Draining System of STELLA-2

    Cho, Chungho; Nam, Ho-Yun; Kim, Jong-Man; Ko, Yung Joo; Kim, Byeongyeon; Cho, Youngil; Eoh, Jeahyuk; Yoon, Jung; Kim, Hyungmo; Lee, Hyeong-Yeon; Lee, Yong Bum; Jeong, Ji-Young; Kim, Jong-Bum [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    STELLA program consist of two phases. In the first phase of the program, separated effects tests for demonstrating the thermal-hydraulic performances of major components such as a decay heat exchanger (DHX), Natural-draft sodium-to-air heat exchanger (AHX) of the decay heat removal system, and mechanical sodium pump of the primary heat transport system (PHTS) had been successfully performed using STELLA-1 in 2015. Now is the time for us to proceed to the second phase of STELLA program. In the second phase, to demonstrate thermal-hydraulic performances and safety features and to produce base data for the specific design approval for the PGSFR (Prototype Generation IV Sodium-cooled Fast Reactor) which will be constructed by 2028 in Korea, integral effects tests will be carried out using the STELLA-2 test facility which is underway with detailed design and will be constructed in 2018. To establish the maintenance easiness of test facility and to prevent a de-functionalization of elementary sodium component located under the main experimental sodium loops, arrangement area was separated the sodium charging and draining piping area from main system experimental piping area. The operation margin of test facility and the best use of electro-magnetic pumps were established according to employ connecting line between RV charging piping and main experimental system charging piping. To prevent liquid sodium inflow into the piping of gas supply system, the overflow line was employed in sodium expansion tanks of PHDRS and ADHRS, RV, and reservoirs of IHTS.

  7. A conceptual study of actinide transmutation system with proton accelerator, (2)

    Takizuka, T.; Takada, H.; Kanno, I.; Ogawa, T.; Nishida, T.; Kaneko, Y.

    1990-01-01

    This paper describes the thermal hydraulics of the accelerator-driven actinide incineration target system based on power distribution profiles to assess the maximum attainable power. In the case of Na cooling, the reference target operates at a thermal power of 404 MW and a beam current of 18.2 mA. The system transmutes 114 kg actinides per year, which implies that the annual actinide products from about 4.3 units of 3000 MWt pressurized water reactor (PWR) can be incinerated. The Pb-Bi cooled reference target operates at a thermal power of 163 MW and beam current of 5.4 mA. The system transmutes 42 kg actinides annually, and can serve about 1.8 units of PWR. The maximum thermal power can be increased by a factor of about 2 by introducing tungsten pins in the high flux region to flatten the power distribution. The Na cooled tungsten-loaded target operates at a thermal power of 691 MW and beam current of 22.6 mA. The system can serve about 7.6 PWRs. The tungsten-loaded target cooled by Pb-Bi operates at a thermal power of 343 MW at a 9.8 mA beam current. The system can process the actinide from about 3.8 PWRs. (N.K.)

  8. Conceptual Design of Liquid Sodium Charging and Draining System of STELLA-2

    Cho, Chungho; Nam, Ho-Yun; Kim, Jong-Man; Ko, Yung Joo; Kim, Byeongyeon; Cho, Youngil; Eoh, Jeahyuk; Yoon, Jung; Kim, Hyungmo; Lee, Hyeong-Yeon; Lee, Yong Bum; Jeong, Ji-Young; Kim, Jong-Bum

    2016-01-01

    STELLA program consist of two phases. In the first phase of the program, separated effects tests for demonstrating the thermal-hydraulic performances of major components such as a decay heat exchanger (DHX), Natural-draft sodium-to-air heat exchanger (AHX) of the decay heat removal system, and mechanical sodium pump of the primary heat transport system (PHTS) had been successfully performed using STELLA-1 in 2015. Now is the time for us to proceed to the second phase of STELLA program. In the second phase, to demonstrate thermal-hydraulic performances and safety features and to produce base data for the specific design approval for the PGSFR (Prototype Generation IV Sodium-cooled Fast Reactor) which will be constructed by 2028 in Korea, integral effects tests will be carried out using the STELLA-2 test facility which is underway with detailed design and will be constructed in 2018. To establish the maintenance easiness of test facility and to prevent a de-functionalization of elementary sodium component located under the main experimental sodium loops, arrangement area was separated the sodium charging and draining piping area from main system experimental piping area. The operation margin of test facility and the best use of electro-magnetic pumps were established according to employ connecting line between RV charging piping and main experimental system charging piping. To prevent liquid sodium inflow into the piping of gas supply system, the overflow line was employed in sodium expansion tanks of PHDRS and ADHRS, RV, and reservoirs of IHTS

  9. Conceptual design and optimization for JET water detritiation system cryo-distillation facility

    Lefebvre, X.; Hollingsworth, A.; Parracho, A.; Dalgliesh, P.; Butler, B.; Smith, R.

    2015-01-01

    The aim of the Exhaust Detritiation System (EDS) of the JET Active Gas Handling System (AGHS) is to convert all Q-based species (Q 2 , Q-hydrocarbons) into Q 2 O (Q being indifferently H, D or T) which is then trapped on molecular sieve beds (MSB). Regenerating the saturated MSBs leads to the production of tritiated water which is stored in Briggs drums. An alternative disposal solution to offsite shipping, is to process the tritiated water onsite via the implementation of a Water Detritiation System (WDS) based, in part, on the combination of an electrolyser and a cryo-distillation (CD) facility. The CD system will separate a Q 2 mixture into a de-tritiated hydrogen stream for safe release and a tritiated stream for further processing on existing AGHS subsystems. A sensitivity study of the Souers' model using the simulation program ProSimPlus (edited by ProSim S.A.) has then been undertaken in order to perform an optimised dimensioning of the cryo-distillation system in terms of available cooling technologies, cost of investment, cost of operations, process performance and safety. (authors)

  10. Conceptual design and optimization for JET water detritiation system cryo-distillation facility

    Lefebvre, X.; Hollingsworth, A.; Parracho, A.; Dalgliesh, P.; Butler, B.; Smith, R. [JET-EFDA, Culham Science Center, Abingdon, Oxon (United Kingdom)

    2015-03-15

    The aim of the Exhaust Detritiation System (EDS) of the JET Active Gas Handling System (AGHS) is to convert all Q-based species (Q{sub 2}, Q-hydrocarbons) into Q{sub 2}O (Q being indifferently H, D or T) which is then trapped on molecular sieve beds (MSB). Regenerating the saturated MSBs leads to the production of tritiated water which is stored in Briggs drums. An alternative disposal solution to offsite shipping, is to process the tritiated water onsite via the implementation of a Water Detritiation System (WDS) based, in part, on the combination of an electrolyser and a cryo-distillation (CD) facility. The CD system will separate a Q{sub 2} mixture into a de-tritiated hydrogen stream for safe release and a tritiated stream for further processing on existing AGHS subsystems. A sensitivity study of the Souers' model using the simulation program ProSimPlus (edited by ProSim S.A.) has then been undertaken in order to perform an optimised dimensioning of the cryo-distillation system in terms of available cooling technologies, cost of investment, cost of operations, process performance and safety. (authors)

  11. CONCEPTUAL DIFFERENCES BETWEEN THE PACIFIC, ATLANTIC AND ARCTIC TSUNAMI WARNING SYSTEMS FOR CANADA

    T.S. Murty

    2005-01-01

    Full Text Available Canada has coastlines on three of the four oceans on the globe, namely, the Pacific, Atlantic and Arctic oceans. The Pacific and Atlantic oceans are connected to the Arctic Ocean in the north, but still they are three distinct oceans, and need three individual tsunami warning systems. Tsunamis in the Arctic Ocean are not as well documented as in the Pacific and Atlantic oceans. From what is known, tsunamis in the Arctic Ocean are rare and probably are small in amplitude. Because of very low population density, around the Canadian Arctic, at present, there is no priority for a tsunami warning system for Arctic Canada. For the Pacific Ocean, a tsunami warning system is in existence since 1948. In at least one sense, the warning aspects of the tsunami warning system for the Pacific coast of Canada, is relatively simple and straight forward, because it involves only the federal government (PSEPC and the provincial government of British Columbia (PEP. For the Atlantic Ocean, A tsunami warning system is now being established. The warning aspects will be some what more complex for eastern Canada, since it not only involves the federal government, but also five provinces, namely, Newfoundland and Labrador, Nova Scotia, New Brunswick, Prince Edward Island and Quebec. The Alaska tsunami warning center (ATWC in Palmer, Alaska, provides tsunami warnings for both Pacific and Atlantic Canada.

  12. Farm Household Economic Model of The Integrated Crop Livestock System: Conceptual and Empirical Study

    Atien Priyanti

    2007-06-01

    Full Text Available An integrated approach to enhance rice production in Indonesia is very prospectus throughout the implementation of adapted and liable integrated program. One of the challenges in rice crop sub sector is the stagnation of its production due to the limitation of organic matter availability. This provides an opportunity for livestock development to overcome the problems on land fertility through the use of manure as the source of organic fertilizer. Ministry of Agriculture had implemented a program on Increasing Integrated Rice Productivity with an Integrated Crop Livestock System as one of the potential components since 2002. Integrated crop livestock system program with special reference to rice field and beef cattle is an alternative to enhance the potential development of agriculture sector in Indonesia. The implementation on this integrated program is to enhance rice production and productivity through a system involving beef cattle with its goal on increasing farmers’ income. Household economic model can be used as one of the analysis to evaluate the success of the implemented crop livestock system program. The specificity of the farmers is that rationality behavior of the role as production and consumption decision making. In this case, farmers perform the production to meet home consumption based on the resources that used directly for its production. The economic analysis of farmers household can be described to anticipate policy options through this model. Factors influencing farmers’ decisions and direct interrelations to production and consumption aspects that have complex implications for the farmers’ welfare of the integrated crop livestock system program.

  13. Pattern-Based Development of Enterprise Systems: from Conceptual Framework to Series of Implementations

    Sergey V. Zykov

    2013-04-01

    Full Text Available Building enterprise software is a dramatic challenge due to data size, complexity and rapid growth of the both in time. The issue becomes even more dramatic when it gets to integrating heterogeneous applications. Therewith, a uniform approach is required, which combines formal models and CASE tools. The methodology is based on extracting common ERP module level patterns and applying them to series of heterogeneous implementations. The approach includes a lifecycle model, which extends conventional spiral model by formal data representation/management models and DSL-based "low-level" CASE tools supporting the formalisms. The methodology has been successfully implemented as a series of portal-based ERP systems in ITERA oil-and-gas corporation, and in a number of trading/banking enterprise applications for other enterprises. Semantic network-based airline dispatch system, and a 6D-model-driven nuclear power plant construction support system are currently in progress.

  14. Conceptual Design of Automotive Compressor for Integrated Portable Air Conditioning System

    Ishak Muhammad Ikman

    2017-01-01

    Full Text Available This study introduces a new concept of portable air conditioner which integrated with some available components in automotive air conditioning system. This new idea intends to solve the storage problems as well as to reduce the price of current portable air conditioner since some devices could directly be used from the automotive air conditioning system. The primary emphasis of this study was on the modification of automotive compressor design so as the system may alternately be operated. The length of conventional compressor shaft is extended to place an additional clutch pulley, a drive plate and a clutch coil. The new concept particularly the shaft and pulley were analysed through slope deflection and computational finite element analyses. The result of engineering analyses exhibited that the new design of compressor shaft and clutch pulleys promote a low risk of failure as the data values recorded are lower than the critical value for each criterion investigated.

  15. Sixty Percent Conceptual Design Report: Enterprise Accountability System for Classified Removable Electronic Media

    B. Gardiner; L.Graton; J.Longo; T.Marks, Jr.; B.Martinez; R. Strittmatter; C.Woods; J. Joshua

    2003-05-03

    Classified removable electronic media (CREM) are tracked in several different ways at the Laboratory. To ensure greater security for CREM, we are creating a single, Laboratory-wide system to track CREM. We are researching technology that can be used to electronically tag and detect CREM, designing a database to track the movement of CREM, and planning to test the system at several locations around the Laboratory. We focus on affixing ''smart tags'' to items we want to track and installing gates at pedestrian portals to detect the entry or exit of tagged items. By means of an enterprise database, the system will track the entry and exit of tagged items into and from CREM storage vaults, vault-type rooms, access corridors, or boundaries of secure areas, as well as the identity of the person carrying an item. We are considering several options for tracking items that can give greater security, but at greater expense.

  16. Conceptual design and economic evaluation about the coupling of high power PWRs and desalination system

    Kim, Sang Ho; Chang, Soon Heung [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Kim, Hyeon Min; Heo, Gyun Young [Kyung Hee Univ., Yongin (Korea, Republic of)

    2012-03-15

    Both electricity and fresh water become basic human needs in modern days. This paper describes the coupling methods of high power pressurized water reactors and desalination system, and evaluates the economics of coupling systems. OPR1000 designed by Korea was chosen for the reference reactor. Because MED (Mulct-Effect Distillation) with TVC (Thermal Vapor Compressor) have been evaluated as an effective desalination system for high power reactors, it was used for the reference desalination method in simulation. In order to simulate the secondary circuit of PWRs with heat exchangers for MED-TVC, PEPSE program which is normally used for performance evaluation of power system efficiencies was used. The coupling of OPR1000 and desalination systems were set under the restriction it had to make as small changes as possible. From the results PEPSE simulation, the economics of the coupling systems were calculates using equations form DEEP4.0 (Desalination Economic Evaluation Program) which was developed by IAEA because Deep simulates just two simple couplings which are back pressure and condensation/extraction. In the secondary circuit simulation seven coupling cases were set and outlet powers to heat exchanger for desalination were varied to be dependent on the thermohydraulic conditions on each part. The results of changed electrical power generation were calculated with the thermal outputs for desalination. It is concluded that two coupling method using the steam from high-pressure turbine have high performance and are economical among the simulated cases. The first one is to add a heat exchanger on the branch from high-pressure turbine into moisture separator and the other is on the branch into feedwater heating parts. It proves desalination plants can be added to current high power PWRs.

  17. Conceptual design of an electron cyclotron wave system for NET/ITER

    Kasparek, W.; Kumric, H.; Mueller, G.A.; Pretterebner, J.; Schueller, P.G.; Wagner, D.

    1991-07-01

    Electron Cyclotron waves (ECWs) provide a scheme for electron heating, which, owing to the strong localization of the resonant interaction with the plasma, allows an efficient tailoring of the power deposition profile. In the proposed ITER reference scenario for current drive and heating, ECWs are considered to assist plasma formation, pre-heating, local current profile control near the q=2 surface and possibly for baking the first wall tiles. For these functions, a total power of 20 MW, CW, at a frequency around 120 GHz is needed. A higher frequency system (140 GHz, 20 MW, CW), is also considered to heat the plasma centre and provide burn control. The same system at increased power could be used for plasma heating to ignition. For NET, due to the higher magnetic field, the frequencies needed for the tasks mentioned above are approximately 140 GHz and 160 GHz, respectively. ECWs are also envisaged for bulk heating of the NET plasma. Here, frequencies of about 160 GHz are necessary. A detailed study for the 120 GHz/20 MW ITER reference system has been performed. Scaling rules as well as additional antenna designs for higher frequency systems have been developed. The design principle was to offer a high degree of flexibility for the wide range of envisaged uses of the ECWs. The ECW system should satisfy the physics requirements, advanced requirements of reliability and availability, and must be compatible with the nuclear environment (which requires radiation resistance as well as remote maintenance of at least the antenna part). Therefore, it has been tried to place the most critical components as far away from the machine as possible. To improve the availability, the installation of 15% spare tubes and transmission systems is proposed. (orig.)

  18. EVALUATION OF A CONCEPTUAL VEHICLE STEERING SYSTEM FOR INDEPENDENT WHEEL CONTROL

    Ryszard BUCHALIK

    2017-03-01

    Full Text Available This paper presents a brief description of an unconventional steering system involving electronic stability control and its influence on vehicle motion. The proposed configuration enables individual changes in steering angle for each single wheel, in contrast to the mechanical linkage solution. An analysis of vehicle behaviour during emergency braking on a heterogeneous surface is conducted, especially with regard to the undesirable rotation of the vehicle body. The benefits of using this active steering system, implemented in the steer-by-wire mode, are characterized, while the problems for further consideration and the potential benefits of such a solution are described.

  19. Conceptual designs of automated systems for underground emplacement and retrieval of nuclear waste

    Slocum, A.H.; Hou, W.M.; Park, K.; Hochmuth, C.; Thurston, D.C.

    1987-01-01

    Current designs of underground nuclear waste repositories have not adequately addressed the possibility of automated, unmanned emplacement and retrieval. This report will present design methodologies for development of an automated system for underground emplacement of nuclear waste. By scaling generic issues to different repositories, it is shown that a two vehicle automated waste emplacement/retrieval system can be designed to operate in a fail-safe mode. Evaluation of cost at this time is not possible. Significant gains in worker safety, however, can be realized by minimizing the possibility of human exposure

  20. Solar central receiver hybrid power system, Phase I. Volume 2. Conceptual design. Final technical report, October 1978-August 1979

    None

    1979-09-01

    The objectives of this study were to develop a hybrid power system design that (1) produces minimum cost electric power, (2) minimizes the capital investment and operating cost, (3) permits capacity displacement, (4) and achieves utility acceptance for market penetration. We have met the first three of these objectives and therefore believe that the fourth, utility acceptance, will become a reality. These objectives have been met by utilizing the Martin Marietta concept that combines the alternate central receiver power system design and a high-temperature salt primary heat transfer fluid and thermal storage media system with a fossil-fired nonsolar energy source. Task 1 reviewed the requirements definition document and comments and recommendations were provided to DOE/San Francisco. Task 2 consisted of a market analysis to evaluate the potential market of solar hybrid power plants. Twenty-two utilities were selected within nine regions of the country. Both written and verbal correspondence was used to assess solar hybrid power plants with respect to the utilities' future requirements and plans. The parametric analysis of Task 3 evaluated a wide range of subsystem configurations and sizes. These analyses included subsystems from the solar standalone alternate central receiver power system using high-temperature molten salt and from fossil fuel nonsolar subsystems. Task 4, selection of the preferred commerical system configuration, utilized the parametric analyses developed in Task 3 to select system and subsystem configurations for the commercial plant design. Task 5 developed a conceptual design of the selected commercial plant configuration and assessed the related cost and performance. Task 6 assessed the economics and performance of the selected configuration as well as future potential improvements or limitations of the hybrid power plants.

  1. The Conceptual Approaches to Strategic Management of Region Using the Spatially Localized Agrarian Economic Systems

    Petrenko Natalia О.

    2017-10-01

    Full Text Available The article is aimed at improving the theoretical and methodical provisions of the cluster approach to development of the spatially localized systems of the agricultural sector of Ukrainian economy at the regional level. Based on generalizing the relevant theoretical provisions, the identified characteristics of formation and development of the spatially localized systems, it has been found that, originating in the form of economic growth zones, they have been transformed into clustered and subclustered forms. It has been indicated that a prospective form of further development of the spatially localized systems is formation of subclustered structures that take account of the established specialization of localities, appropriate infrastructure, resource availability. The possibility of creating a project of developing a cluster formation was discussed on the example of the Central Economic Area. A complex of basic requirements for the intended localization of the cluster has been formulated. Proceeding from the results of the study, practical proposals for strategic management of region have been developed on the basis of development of cluster formations, using the spatially localized agrarian economic systems.

  2. GENII: The Hanford Environmental Radiation Dosimetry Software System: Volume 1, Conceptual representation

    Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

    1988-12-01

    The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). The purpose of this coupled system of computer codes is to analyze environmental contamination resulting from acute or chronic releases to, or initial contamination of, air, water, or soil. This is accomplished by calculating radiation doses to individuals or populations. GENII is described in three volumes of documentation. The first volume describes the theoretical considerations of the system. The second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. The third volume is a Code Maintenance Manual for the user who requires knowledge of code detail. It includes code logic diagrams, global dictionary, worksheets, example hand calculations, and listings of the code and its associated data libraries. 72 refs., 15 figs., 34 tabs

  3. Conceptualization and Exploration of Composite Career Anchors: An Analysis of Information Systems Personnel.

    Ramakrishna, Hindupur V.; Potosky, Denise

    2003-01-01

    Information systems professionals (n=163) completed measures of career anchors and outcomes (career/job satisfaction, job performance, perceived advancement prospects); 46% had multiple dominant anchors and these individuals did not have significantly different career outcomes than those with single dominant anchors. (Contains 26 references.) (SK)

  4. Towards interoperability of energy management systems using flexibility through conceptual modeling

    Rumph, F.J.; Huitema, G.B.; Verhoosel, J.

    2013-01-01

    Smart Grid technologies are being developed to better operate the power system and integrate larger amounts of renewable intermittent power sources and new energy efficient electrical equipment. Coordinating flexibilities in power supply and demand plays a crucial role in this development.

  5. A conceptual model for the international transfer of the Japanese management systems

    Yokozawa, Kodo; de Bruijn, E.J.; Steenhuis, H.J.; Trimble, Robert

    2007-01-01

    The transferability of Japanese management systems (JMSs) abroad has been studied intensively since the 1980s. However, the conclusions regarding this study field are mixed. Such confusion is caused by the vague definition of terms and the different methods employed by researchers to measure the

  6. GENII: The Hanford Environmental Radiation Dosimetry Software System: Volume 1, Conceptual representation

    Napier, B.A.; Peloquin, R.A.; Strenge, D.L.; Ramsdell, J.V.

    1988-12-01

    The Hanford Environmental Dosimetry Upgrade Project was undertaken to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) in updated versions of the environmental pathway analysis models used at Hanford. The resulting second generation of Hanford environmental dosimetry computer codes is compiled in the Hanford Environmental Dosimetry System (Generation II, or GENII). The purpose of this coupled system of computer codes is to analyze environmental contamination resulting from acute or chronic releases to, or initial contamination of, air, water, or soil. This is accomplished by calculating radiation doses to individuals or populations. GENII is described in three volumes of documentation. The first volume describes the theoretical considerations of the system. The second volume is a Users' Manual, providing code structure, users' instructions, required system configurations, and QA-related topics. The third volume is a Code Maintenance Manual for the user who requires knowledge of code detail. It includes code logic diagrams, global dictionary, worksheets, example hand calculations, and listings of the code and its associated data libraries. 72 refs., 15 figs., 34 tabs.

  7. Conceptual Design of Low Fusion Power Hybrid System for Waste Transmutation

    Hong, Seong Hee; Kim, Myung Hyun [Kyung Hee University, Yongin (Korea, Republic of)

    2016-10-15

    DRUP (Direct Reuse of Used PWR) fuel has same process with DUPIC (Direct Use of spent PWR fuel Into CANDU reactor). There are 2 big benefits by using DRUP fuel in Hybrid system. One is fissile production during operating period. Required power is decreased by fissile production from DRUP fuel. When the fusion power is reduced, integrity of structure materials is not significantly weakened due to reduction of 14.1MeV high energy neutrons. In addition, required amount of tritium for self-sufficiency TBR (Tritium Breeding Ratio ≥ 1.1) is decreased. Therefore, it is possible to further loading the SNF as much as the amount of lithium decreased. It is effective in transmutation. The other one is that DRUP fuel is also SNF. Therefore, using DRUP fuel is reusing of SNF, as a result it makes reduction of SNF from PWR. However, thermal neutron system is suitable for using DRUP fuel compared to fast neutron system. Therefore, transmutation zone designed (U-TRU)Zr fuel and fissile production zone designed DRUP fuel are separated in this study. In this paper, using DRUP fuel for low fusion power in hybrid system is suggested. Fusion power is decreased by using DRUP fuel. As a result, TBR is satisfied design condition despite of using natural lithium. In addition, not only (U-TRU)Zr fuel but also DRUP fuel are transmuted.

  8. Conceptual design of a digital control system for nuclear criticality experiments

    Rojas, S.P.

    1994-04-01

    Nuclear criticality is a concern in many areas of nuclear engineering including waste management, nuclear weapons testing and design, basic nuclear research, and nuclear reactor design and analysis. As in many areas of science and engineering, experimental work conducted in this field has provided a wealth of data and insight essential to the formulation of theory and the advancement in knowledge of fissioning systems. In light of the many diverse applications of nuclear criticality, there is a continuing interest to learn and understand more about the fundamental physical processes through continued experimentation. This thesis addresses the problem of setting up and programming a microprocessor-based digital control system (PLC) for a proposed critical experiment using, among other devices, a stepper motor, a joystick control mechanism, and switches. This experiment represents a revised configuration to test cylindrical nuclear waste packages. A Monte Carlo numerical study for the proposed critical assembly has been performed in order to illustrate how results from numerical calculations are used in the process of assembling the control system and to corroborate previous experimental data. In summary, a control system utilizing some common devices necessary to perform a critical experiment (stepper motor, push-buttons, etc.) has been assembled. Control components were sized using the results of a probabilistic computer code (MCNP). Finally, a program was written that illustrates the coupling between the hardware and the devices being controlled in the new test fixture

  9. Making a Map of Science: General Systems Theory as a Conceptual Framework for Tertiary Science Education.

    Gulyaev, Sergei A.; Stonyer, Heather R.

    2002-01-01

    Develops an integrated approach based on the use of general systems theory (GST) and the concept of 'mapping' scientific knowledge to provide students with tools for a more holistic understanding of science. Uses GST as the core methodology for understanding science and its complexity. Discusses the role of scientific community in producing…

  10. Strategic Agency and System Diversity: Conceptualizing Institutional Positioning in Higher Education

    Fumasoli, Tatiana; Huisman, Jeroen

    2013-01-01

    This paper argues that the impact of individual higher education institutions' strategies on system diversity should be explored. By looking at how universities respond strategically to governmental policies as well as to the actions of other (competing) institutions, our understanding of determinants of diversity can be enriched. A conceptual…

  11. Conceptualizing the Functional Requirements for a Next-Generation E-Portfolio System

    Mu, Enrique; Wormer, Sallie; Foizey, Roberta; Barkon, Beverly; Vehec, Mark

    2010-01-01

    The use of e-portfolio systems in higher education has not grown as anticipated by early adopters when the potential benefits first became apparent, yet the promise remains. The vision of a flexible tool that meets multiple goals--serving as a showcase for student work, promoting self-reflection, supporting assessment and accreditation efforts,…

  12. SCALES : A System Level Tool for Conceptual Design of Nano- and Microsatellites

    Aas, C.; Zandbergen, B.T.C.; Hamann, R.J.; Gill, E.K.A.

    2009-01-01

    A satellite design tool has been developed offering systems engineers a fast way to analyze the feasibility of a particular design concept. The tool differs from available tools on the market in that it is specifically targeted at small satellites in the mass range of 1-50 kg, and with a limited

  13. Conceptual design and economic evaluation about the coupling of high power PWRs and desalination system

    Kim, Sang Ho; Chang, Soon Heung; Kim, Hyeon Min; Heo, Gyun Young

    2012-01-01

    REX-10 is a small-sized integral pressurized water reactor designed by Seoul National Univ. (SNU) for supplying electricity and district heating in micro-grid. REX-10 has a rated thermal output of 10 MW and the reactor assemblies are equipped with the thorium-fueled core, the helical-coil steam generator, and the steam-gas pressurizer inside a reactor pressure vessel. Unique technical features and reactor system designs of REX-10 are presented in this paper. To evaluate the system performance and investigate the transient behaviors of REX-10, a thermal-hydraulic system code named TAPIR is developed by SNU on the basis of the momentum integral model. The TASS/SMR code developed by KAERI is also applicable to the transient analyses of the advanced integral reactors. Main design decisions of the REX-10 reactor coolant system are assessed using both codes from the steady-state calculation. In addition, a transient analysis on the uncontrolled reactivity insertion event is performed to evaluate the reactor dynamics coupled with the thermal-hydraulic behavior of REX-10. The predicted results from TAPIR and TASS/SMR are compared with each other and good agreements are obtained

  14. Conceptual design and economic evaluation about the coupling of high power PWRs and desalination system

    Kim, Sang Ho; Chang, Soon Heung [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Kim, Hyeon Min; Heo, Gyun Young [Kyung Hee Univ., Yongin (Korea, Republic of)

    2012-03-15

    REX-10 is a small-sized integral pressurized water reactor designed by Seoul National Univ. (SNU) for supplying electricity and district heating in micro-grid. REX-10 has a rated thermal output of 10 MW and the reactor assemblies are equipped with the thorium-fueled core, the helical-coil steam generator, and the steam-gas pressurizer inside a reactor pressure vessel. Unique technical features and reactor system designs of REX-10 are presented in this paper. To evaluate the system performance and investigate the transient behaviors of REX-10, a thermal-hydraulic system code named TAPIR is developed by SNU on the basis of the momentum integral model. The TASS/SMR code developed by KAERI is also applicable to the transient analyses of the advanced integral reactors. Main design decisions of the REX-10 reactor coolant system are assessed using both codes from the steady-state calculation. In addition, a transient analysis on the uncontrolled reactivity insertion event is performed to evaluate the reactor dynamics coupled with the thermal-hydraulic behavior of REX-10. The predicted results from TAPIR and TASS/SMR are compared with each other and good agreements are obtained.

  15. Conceptual design of a cover system for the degmay uranium tailings site

    Vatsidin, Saidov; David, S. Kessel; Kim, Chang Lak [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2016-06-15

    The Republic of Tajikistan has ten former uranium mining sites. The total volume of all tailings is approximately 55 million tonnes, and the covered area is more than 200 hectares. The safe management of legacy uranium mining and tailing sites has become an issue of concern. Depending on the performance requirements and site-specific conditions (location in an arid, semiarid or humid region), a cover system for uranium tailings sites could be constructed using several material layers using both natural and man-made materials. The purpose of this study is to find a feasible cost-effective cover system design for the Degmay uranium tailings site which could provide a long period (100 years) of protection. The HELP computer code was used in the evaluation of potential Degmay cover system designs. As a result of this study, a cover system with 70 cm thick percolation layer, 30 cm thick drainage layer, geomembrane liner and 60 cm thick barrier soil layer is recommended because it minimizes cover thickness and would be the most cost-effective design.

  16. Conceptual design of emergency communication system to cope with severe accidents in NPPs and its performance evaluation

    Son, Kwang Seop; Kim, Chang Hwoi; Kang, Hyun Gook

    2015-01-01

    Highlights: • The emergency communication system requires the performances of the throughput of 1 Mbps, BER of 10 −6 and network configuration of 1:12 communication. • The emergency communication system consists of the terrestrial communication and satellite communication system. • In the terrestrial communication system, at least two wireless repeaters are needed to secure LOS and the throughput and delay time are 16 Mbps and 16 ms, respectively. • In the satellite communication system, DSSS and FDMA are used and the fade margin range is from 1.3 to 16 dB. - Abstract: The Fukushima accident induced by the great earthquake and tsunami reveals the vulnerability of I and C System. In the severe environment, the normal I and C system did not work properly and results in false information about the internal situation in NPP. Eventually the accident was not properly handled at the early stage. Therefore advanced emergency response system using a wireless channel is necessary to cope with the severe accident. In this paper, we introduce the ERS consisting of the HMS and MCS the ECS linking the HMS with MCS and the performance requirement of the ECS is analyzed. The ECS satisfying the requirement is designed conceptually and the performance of the ECS is evaluated through analysis and simulator. To secure a reliable and diverse configuration, the ECS is configured as the dual system which consists of the terrestrial communication and satellite communication. The terrestrial communication system is designed based on the IEEE 802.11. Analyzed performance results prove that the performance requirement can be sufficiently achieved. But if the scalability of data capacity is considered later, use of the advanced 802.11 standard such as 802.11n and multiple signal paths between the HMS and MCS are necessary. In the satellite communication system, the FDMA is used in the status link and the DSSS is used in the control link. The network supporting various data rates is

  17. Modeling and optimization of energy generation and storage systems for thermal conditioning of buildings targeting conceptual building design

    Grahovac, Milica

    2012-11-29

    The thermal conditioning systems are responsible for almost half of the energy consump-tion by commercial buildings. In many European countries and in the USA, buildings account for around 40% of primary energy consumption and it is therefore vital to explore further ways to reduce the HVAC (Heating, Ventilation and Air Conditioning) system energy consumption. This thesis investigates the relationship between the energy genera-tion and storage systems for thermal conditioning of buildings (shorter: primary HVAC systems) and the conceptual building design. Certain building design decisions irreversibly influence a building's energy performance and, conversely, many generation and storage components impose restrictions on building design and, by their nature, cannot be introduced at a later design stage. The objective is, firstly, to develop a method to quantify this influence, in terms of primary HVAC system dimensions, its cost, emissions and energy consumption and, secondly, to enable the use of the developed method by architects during the conceptual design. In order to account for the non-stationary effects of the intermittent renewable energy sources (RES), thermal storage and for the component part load efficiencies, a time domain system simulation is required. An abstract system simulation method is proposed based on seven pre-configured primary HVAC system models, including components such as boil-ers, chillers and cooling towers, thermal storage, solar thermal collectors, and photovoltaic modules. A control strategy is developed for each of the models and their annual quasi-stationary simulation is performed. The performance profiles obtained are then used to calculate the energy consumption, carbon emissions and costs. The annuity method has been employed to calculate the cost. Optimization is used to automatically size the HVAC systems, based on their simulation performance. Its purpose is to identify the system component dimensions that provide

  18. Modeling and optimization of energy generation and storage systems for thermal conditioning of buildings targeting conceptual building design

    Grahovac, Milica

    2012-11-29

    The thermal conditioning systems are responsible for almost half of the energy consump-tion by commercial buildings. In many European countries and in the USA, buildings account for around 40% of primary energy consumption and it is therefore vital to explore further ways to reduce the HVAC (Heating, Ventilation and Air Conditioning) system energy consumption. This thesis investigates the relationship between the energy genera-tion and storage systems for thermal conditioning of buildings (shorter: primary HVAC systems) and the conceptual building design. Certain building design decisions irreversibly influence a building's energy performance and, conversely, many generation and storage components impose restrictions on building design and, by their nature, cannot be introduced at a later design stage. The objective is, firstly, to develop a method to quantify this influence, in terms of primary HVAC system dimensions, its cost, emissions and energy consumption and, secondly, to enable the use of the developed method by architects during the conceptual design. In order to account for the non-stationary effects of the intermittent renewable energy sources (RES), thermal storage and for the component part load efficiencies, a time domain system simulation is required. An abstract system simulation method is proposed based on seven pre-configured primary HVAC system models, including components such as boil-ers, chillers and cooling towers, thermal storage, solar thermal collectors, and photovoltaic modules. A control strategy is developed for each of the models and their annual quasi-stationary simulation is performed. The performance profiles obtained are then used to calculate the energy consumption, carbon emissions and costs. The annuity method has been employed to calculate the cost. Optimization is used to automatically size the HVAC systems, based on their simulation performance. Its purpose is to identify the system component dimensions that provide minimal

  19. Evaluation of conceptual Heat Exchanger Design for passive containment cooling system of SMART

    Kim, Min-Ki; Hong, Soon Joon [FNC Tech., Yongin (Korea, Republic of); Kim, Young In; Kim, Seok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    PCCS(Passive containment cooling system) is the passive safety system which ultimately removes the reactor decay heat. Cooling performance of the air-cooled type and water-circulation cooling type of PCCS were analyzed using CAP version 2.21. The analysis results show the water-circulation cooling PCCS is more effective in lowering the peak pressure and temperature in the containment building. However, the air-cooled PCCS is more effective to the long-term cooling. From this study, the efficiency evaluation results for the two PCCS designs are obtained. These results may be applied in the PCCS design improvement. Moreover, these results will be used as a reference for the later PCCS design and analysis.

  20. Conceptual design of laser fusion reactor, SENRI-I - 1. concept and system design

    Ido, S.; Naki, S.; Norimatsu, T.

    1981-01-01

    Design features of a laser fusion reactor concept SENRI-I and new concepts are reviewed and discussed. The unique feature is the utilization of a magnetic field to guide and control the inner liquid Li flow. Basic requirements and typical parameters used in the design are presented. Items to be discussed are constitution of the system, performance of liquid Li flow, neutronics, thermo-electric cycle, fuel cycle and new concepts

  1. The Globalization of Food Systems: A Conceptual Framework and Empirical Patterns

    Senauer, Benjamin; Venturini, Luciano

    2005-01-01

    This paper discusses a number of stylized facts and empirical patterns regarding agri-food trade flows as well as foreign direct investments in food processing and retailing. This evidence supports the hypothesis of an increasingly global food system. We identify the main factors at work such as push/supply side, pull/demand-side, and enabling/external factors. We show how the shift from national to global retailing is a recent phenomenon whose relevance for the globalization of upstream sect...

  2. The conceptual definition of a crisis management decision support system CMDSS

    Schenker-Wicki, A G.M.

    1990-01-01

    The Institute for Automation and Operations Research at the University of Fribourg has been charged by the Swiss government to design a concept for a Crisis Management Decision Support System CMDSS to evaluate acceptable countermeasures to reduce ingestion dose after an accidental release of radioactivity and to implement a prototype. The study is divided in two parts. In the first part all the necessary modules and techniques for efficient decision making, based on the most recent developments in decision theory, as well as the necessary structuring of the decision making process are discussed, while in the second part the plausibility of the evaluated system is tested using a case study. For the time being no empirical research has been carried out. The decision making concept presented in this book comprehends decision making on two different levels, a technical and a political one. The division of decision power corresponds to the Swiss legal prescriptions for accidental release of radioactivity. To guarantee decisions of high quality, as many countermeasures as possible have to be presented to the decision makers. Due to the difficulty of evaluating all the possible countermeasures an expert-system is provided for the decision makers to generate the space of alternatives. The use of an expert-system should further help to reduce systematically the huge amount of information which is characteristic in crises situations. To support the comparison and ranking of the different alternatives a multi-criteria approach, the PROMETHEE method, which is based upon outranking relationships, is used. Due to the complexity of the decision making process, its poorly defined mathematical context and the unwillingness of the decision makers to use a method which requires defined substitution rates, decision methods based on utility theory will not be applied in this study. (Abstract Truncated)

  3. Conceptual Modeling of a Quantum Key Distribution Simulation Framework Using the Discrete Event System Specification

    2014-09-18

    researcher discovered issues that affected the research. The most important of 19 these was the lack of advanced math functions in the DEVS- JAVA ...to install a comparative JAVA -language scientific library. This issue was reported to RTSync, but there was no fix to this issue during the research...and tracking systems necessary to deal with high relative angular motion. random motion of the platforms. and atmospheric turbulence that would be

  4. Rules of Origin: Conceptual Explorations and Lessons from the Generalized System of Preferences

    Ujiie, Teruo

    2006-01-01

    Customs valuation, commodity classification system, and rules of origin are the three basic customs laws. Rules to determine a country of origin, or "nationality" of a country of production of goods, are called "rules of origin." They are widely used in international trade in the application of different tariffs, trade remedy measures, tariff quotas, and trade statistics. With the globalization of economic activities resulting in outsourcing of materials as well as the global proliferation of...

  5. Conceptual Design of an Enlisted Force Management System for the Air Force.

    1983-08-01

    system will be ected toward qrade restructurisq, personne planniuq, and personnel proqrammiaq. Accossion Por NT1 - rPAS:T LBy- Distribhition/ Availability...used as loss predictors are stable enough that one can assign mean values to a cell in the inventory (for medium-term prediction), and which...characteristics require expansion of the number of cells ? We expect that the first- term force will be divided into more cells than the career force. 5.5. DATA TO

  6. Conceptual and Laboratory Exercise to Apply Newton's Second Law to a System of Many Forces

    Mungan, Carl E.

    2012-01-01

    A pair of objects on an inclined plane are connected together by a string. The upper object is then connected to a fixed post via a spring. The situation is first analysed as a classroom exercise in using free-body diagrams to solve Newton's second law for a system of objects upon which many different kinds of force are acting (string tension,…

  7. Commercial applications of solar total energy systems. Volume 3. Conceptual designs and market analyses. Final report

    Boobar, M.G.; McFarland, B.L.; Nalbandian, S.J.; Willcox, W.W.; French, E.P.; Smith, K.E.

    1978-07-01

    The overall objective of this program was to assess the feasibility of using solar energy to provide a significant fraction of the energy needs of commercial buildings that have energy demands greater than 200 kWe. The STES concept trade studies, sensitivity parameters, performance characteristics, and selected concepts are discussed. Market penetration rate estimates are provided, and technology advancements and utilization plans are discussed. Photovoltaic STES configurations and Rankine cycle thermal STES systems are considered. (WHK)

  8. Indigenous Peoples' food systems, nutrition, and gender: Conceptual and methodological considerations.

    Lemke, Stefanie; Delormier, Treena

    2017-11-01

    Indigenous Peoples, especially women and children, are affected disproportionately by malnutrition and diet-related health problems. Addressing this requires an investigation of the structural conditions that underlie unequal access to resources and loss of traditional lifestyles and necessitates inclusive approaches that shed light onto these issues and provide strategies to leverage change. Indigenous Peoples' food systems are inextricably connected to land, which in turn is interwoven with issues of self-determination, livelihoods, health, cultural and spiritual heritage, and gender. Ongoing loss of land and the dominant agri-food model further threaten Indigenous Peoples' food systems. Continuing gender-based discrimination undermines the self-determination and rights of women and negatively impacts their health, nutritional status, and overall well-being, as well as the well-being of households and communities. We suggest that feminist political ecology and modern matriarchal studies provide holistic interlinking frameworks for investigating underlying issues of power and inequality. We further argue that a focus on the principles of respect, responsibility, and relationships, and an openness to different worldviews, can facilitate a bridging of Indigenous and Western approaches in research and community action conducted in partnership with Indigenous Peoples. This can contribute to creating new ways of knowing regarding Indigenous Peoples' food systems, equally valuing both knowledge systems. Indigenous Peoples' rights, right to food, and food sovereignty are frames that, despite some tensions, have the common goal of self-determination. Through their ability to inform, empower, and mobilize, they provide tools for social movements and communities to challenge existing structural inequalities and leverage social change. © 2018 John Wiley & Sons Ltd.

  9. The conceptual definition of a crisis management decision support system CMDSS

    Schenker-Wicki, A.G.M.

    1990-01-01

    The Institute for Automation and Operations Research at the University of Fribourg has been charged by the Swiss government to design a concept for a Crisis Management Decision Support System CMDSS to evaluate acceptable countermeasures to reduce ingestion dose after an accidental release of radioactivity and to implement a prototype. The study is divided in two parts. In the first part all the necessary modules and techniques for efficient decision making, based on the most recent developments in decision theory, as well as the necessary structuring of the decision making process are discussed, while in the second part the plausibility of the evaluated system is tested using a case study. For the time being no empirical research has been carried out. The decision making concept presented in this book comprehends decision making on two different levels, a technical and a political one. The division of decision power corresponds to the Swiss legal prescriptions for accidental release of radioactivity. To guarantee decisions of high quality, as many countermeasures as possible have to be presented to the decision makers. Due to the difficulty of evaluating all the possible countermeasures an expert-system is provided for the decision makers to generate the space of alternatives. The use of an expert-system should further help to reduce systematically the huge amount of information which is characteristic in crises situations. To support the comparison and ranking of the different alternatives a multi-criteria approach, the PROMETHEE method, which is based upon outranking relationships, is used. Due to the complexity of the decision making process, its poorly defined mathematical context and the unwillingness of the decision makers to use a method which requires defined substitution rates, decision methods based on utility theory will not be applied in this study. The outranking approach presented in this book provides its users with more transparent and intelligible

  10. Conceptualizing the dynamics of workplace stress: a systems-based study of nursing aides

    Jetha, Arif; Kernan, Laura; Kurowski, Alicia

    2017-01-01

    Background Workplace stress is a complex phenomenon that may often be dynamic and?evolving over time. Traditional linear modeling does not allow representation of recursive feedback loops among the implicated factors. The objective of this study was to develop a multidimensional system dynamics model (SDM) of workplace stress among nursing aides and conduct simulations to illustrate how changes in psychosocial perceptions and workplace factors might influence workplace stress over time. Metho...

  11. A Systems-Based Conceptual Framework for Assessing the Determinants of a Social License to Operate in the Mining Industry

    Prno, Jason; Slocombe, D. Scott

    2014-03-01

    The concept of a "social license to operate" (SLO) was coined in the 1990s and gained popularity as one way in which "social" considerations can be addressed in mineral development decision making. The need for a SLO implies that developers require the widespread approval of local community members for their projects to avoid exposure to potentially costly conflict and business risks. Only a limited amount of scholarship exists on the topic, and there is a need for research that specifically addresses the complex and changeable nature of SLO outcomes. In response to these challenges, this paper advances a novel, systems-based conceptual framework for assessing SLO determinants and outcomes in the mining industry. Two strands of systems theory are specifically highlighted—complex adaptive systems and resilience—and the roles of context, key system variables, emergence, change, uncertainty, feedbacks, cross-scale effects, multiple stable states, thresholds, and resilience are discussed. The framework was developed from the results of a multi-year research project which involved international mining case study investigations, a comprehensive literature review, and interviews conducted with mining stakeholders and observers. The framework can help guide SLO analysis and management efforts, by encouraging users to account for important contextual and complexity-oriented elements present in SLO settings. We apply the framework to a case study in Alaska, USA before discussing its merits and challenges. We also illustrate knowledge gaps associated with applications of complex adaptive systems and resilience theories to the study of SLO dynamics, and discuss opportunities for future research.

  12. Systems of psychology as epistemology of psychology: technical supplies and conceptual bases for psychology education

    Catriel Fierro

    2017-03-01

    Full Text Available Resuming the framework outlined in a previous analysis, the present work describes a proposal for teaching systems of psychology based on parameters of meta-theoretical analysis and specific meta-scientific models, with the aim of relocating psychological systems’ courses in systematology of psychology as a component of the epistemology of psychology. Three central issues for systematology in psychologists’ education are described: the importance of working with primary sources through specific pedagogical resources with the aim of developing scientific competences and attitudes, the need to have one (or several sets of fixed parameters to comparatively analyze theoretical systems, and the problems, criteria and options available when contextualizing such comparative meta-theoretical analysis in comprehensive meta-scientific models which belong to the philosophy of science and of psychology. We conclude on the need to transcend the teaching of systematology as a verbal enunciation of concepts proposed by 'great authors', and on certain risks and limitations regarding the teaching of psychological systems conceived as an epistemological exercise.

  13. Toward Global Comparability of Sexual Orientation Data in Official Statistics: A Conceptual Framework of Sexual Orientation for Health Data Collection in New Zealand's Official Statistics System

    Gray, Alistair; Veale, Jaimie F.; Binson, Diane; Sell, Randell L.

    2013-01-01

    Objective. Effectively addressing health disparities experienced by sexual minority populations requires high-quality official data on sexual orientation. We developed a conceptual framework of sexual orientation to improve the quality of sexual orientation data in New Zealand's Official Statistics System. Methods. We reviewed conceptual and methodological literature, culminating in a draft framework. To improve the framework, we held focus groups and key-informant interviews with sexual minority stakeholders and producers and consumers of official statistics. An advisory board of experts provided additional guidance. Results. The framework proposes working definitions of the sexual orientation topic and measurement concepts, describes dimensions of the measurement concepts, discusses variables framing the measurement concepts, and outlines conceptual grey areas. Conclusion. The framework proposes standard definitions and concepts for the collection of official sexual orientation data in New Zealand. It presents a model for producers of official statistics in other countries, who wish to improve the quality of health data on their citizens. PMID:23840231

  14. Towards a Conceptual Design of a Cross-Domain Integrative Information System for the Geosciences

    Zaslavsky, I.; Richard, S. M.; Valentine, D. W.; Malik, T.; Gupta, A.

    2013-12-01

    As geoscientists increasingly focus on studying processes that span multiple research domains, there is an increased need for cross-domain interoperability solutions that can scale to the entire geosciences, bridging information and knowledge systems, models, software tools, as well as connecting researchers and organization. Creating a community-driven cyberinfrastructure (CI) to address the grand challenges of integrative Earth science research and education is the focus of EarthCube, a new research initiative of the U.S. National Science Foundation. We are approaching EarthCube design as a complex socio-technical system of systems, in which communication between various domain subsystems, people and organizations enables more comprehensive, data-intensive research designs and knowledge sharing. In particular, we focus on integrating 'traditional' layered CI components - including information sources, catalogs, vocabularies, services, analysis and modeling tools - with CI components supporting scholarly communication, self-organization and social networking (e.g. research profiles, Q&A systems, annotations), in a manner that follows and enhances existing patterns of data, information and knowledge exchange within and across geoscience domains. We describe an initial architecture design focused on enabling the CI to (a) provide an environment for scientifically sound information and software discovery and reuse; (b) evolve by factoring in the impact of maturing movements like linked data, 'big data', and social collaborations, as well as experience from work on large information systems in other domains; (c) handle the ever increasing volume, complexity and diversity of geoscience information; (d) incorporate new information and analytical requirements, tools, and techniques, and emerging types of earth observations and models; (e) accommodate different ideas and approaches to research and data stewardship; (f) be responsive to the existing and anticipated needs

  15. Overcoming energy efficiency barriers through systems approach—A conceptual framework

    Chai, Kah-Hin; Yeo, Catrina

    2012-01-01

    In this paper we propose a framework which categorizes energy efficiency barriers based on the stage at which the barriers exist. Barriers to energy efficiency have been widely studied but to our knowledge, except for a few studies, we found inadequate consideration for barrier–barrier interactions when proposing policy measures for improving energy efficiency. Leveraging systems thinking's power as a problem solver which identifies underlying structure that explains (similar) patterns of behavior in a variety of different situations, we attempted to identify patterns of barriers to adoption of energy efficiency measures in industrial companies. Inspired by systems thinking, the proposed framework has four stages, namely, Motivation, Capability, Implementation and Results, as well as a feedback loop. Using a case study, we show that following the four stages will lead to positive feedback for future energy efficiency implementations. The framework highlights the interconnected nature of the barriers and a need for policymakers to address these barriers in a holistic manner. We argue that the overall effectiveness of energy efficiency policies is only as strong as the weakest link in the four-stage framework. This differs from most prior research that addressed barriers in isolation, where a solution is proposed for each of the barriers without considering the relationship between the barriers. Our framework also offers a way to understand the roles and responsibilities of major stakeholders such as governments and energy service companies (ESCOs) in driving energy efficiency. This allows the assessment and identification of weak links in energy efficiency policies. - Highlights: ► We propose a systems approach to overcome energy efficiency barriers. ► Barriers are grouped into Motivation, Capability, Implementation and Results. ► Case study shows that there is a feedback loop from Results to Motivation. ► Current Results will affect future Motivation.

  16. A conceptual approach to the biomonitoring of freshwater: the Ecological Ambience System

    Michel LAFONT

    2001-09-01

    Full Text Available The concept of ecological ambience (Ecological Ambience System, EASY is based on the idea that biocenoses (BIO are not only related to the input of organic and mineral substances (IN but also to the way they are stored and processed by the ecosystem. Storage, assimilation and self-purification processes ("ecosystem defences": ED are likely to vary among the different functional units (FUs of the ecosystem. The functional units have been defined on the basis of a simple physical description of sites in an ecosystem, because the physical structure of these units is considered as being of prime importance in the ED processes. For example, mineral and organic substances may be preferentially stored in fine-sediment units, whereas the mineralization rate of organic matter is more likely to be highest in coarse permeable sediments. If the stream ecosystem is viewed as a mosaic, its overall ecological defences will depend upon: 1 the self-purification capacity of the different functional units; 2 their relative proportion within the ecosystem. The EASY concept is now used for ecological researches and also has several applications in the biomonitoring of running waters, illustrated by the study of the River Dore. Biological compartments, specific for each functional unit, are related to operational bio-indicators to build up a global harmonisation system for biomonitoring indices. Four main biological compartments were defined with their related bio-indicators: 1 general biological quality (IBGN biotic index, 2 biological sediment quality (IOBS oligochaete index, 3 biological water quality (diatom index IBD and 4 biological fish quality (study of fish communities. The selected bio-indicators were adjusted to an ecological classification model (Typic concept. A weighting system of the general ecological quality at a site based on the percentage cover of fine sediments is proposed. This approach can be developed using several other compartments. Major

  17. A Conceptual Framework for Occupant-Centered Building Management Decision Support System

    Lazarova-Molnar, Sanja; Shaker, Hamid Reza

    2016-01-01

    -obvious/-direct incentive to reduce energy use and no access to their levels of consumption. In this paper we present a framework for a building energy management decision support system that is motivated by these findings, and therefore, centres the occupants and motivates them to both achieve business-wise and improve......Buildings’ energy consumption makes the largest portion of the overall energy consumption. Commercial buildings are specific and their energy efficiency should not be viewed as a standalone issue. On the contrary, it needs to be viewed in function of the goals of the hosted businesses...

  18. Conceptual definition of a 50-100 kWe NEP system for planetary science missions

    Friedlander, Alan

    1993-01-01

    The Phase 1 objective of this project is to assess the applicability of a common Nuclear Electric Propulsion (NEP) flight system of the 50-100 kWe power class to meet the advanced transportation requirements of a suite of planetary science (robotic) missions, accounting for differences in mission-specific payloads and delivery requirements. The candidate missions are as follows: (1) Comet Nucleus Sample Return; (2) Multiple Mainbelt Asteroid Rendezvous; (3) Jupiter Grand Tour (Galilean satellites and magnetosphere); (4) Uranus Orbiter/Probe (atmospheric entry and landers); (5) Neptune Orbiter/Probe (atmospheric entry and landers); and (6) Pluto-Charon Orbiter/Lander. The discussion is presented in vugraph form.

  19. Understanding Global Change: A New Conceptual Framework To Guide Teaching About Planetary Systems And Both The Causes And Effects Of Changes In Those Systems

    Levine, J.; Bean, J. R.

    2016-12-01

    Goals of the Next Generation Science Standards include understanding climate change and learning about ways to moderate the causes and mitigate the consequences of planetary-scale anthropogenic activities that interact synergistically to affect ecosystems and societies. The sheer number and scale of both causes and effects of global change can be daunting for teachers, and the lack of a clear conceptual framework for presenting this material usually leads educators (and textbooks) to present these phenomenon as a disjointed "laundry list." But an alternative approach is in the works. The Understanding Global Change web resource, currently under development at the UC Berkeley Museum of Paleontology, will provide educators with a conceptual framework, graphic models, lessons, and assessment templates for teaching NGSS-aligned, interdisciplinary, global change curricula. The core of this resource is an original informational graphic that presents and relates Earth's global systems, human and non-human factors that produce changes in those systems, and the effects of those changes that scientists can measure.

  20. A conceptual framework for exploring transitions to decarbonised energy systems in the United Kingdom

    Shackley, Simon; Green, Ken

    2007-01-01

    Drawing upon 'transitions theory' and a typology which produces five types of transitions, we describe and analyse the changes that have taken place in the United Kingdom's energy system over the past several decades in terms of three of these transition pathways, namely reproduction (e.g. incremental improvements in energy efficiency), transformation (e.g. more directed efforts towards energy efficiency gains, e.g., through voluntary and compulsory standards-setting processes) and substitution (e.g. the shift from coal to natural gas). Looking into the future, and drawing upon a programme of UK-based research which covered a wide range of potential new supply technologies and changes on the demand side, we identify the key drivers of change, including economic and commercial, technological, policy and regulatory imperatives. This analysis opens up the prospect for two further transition pathways to become manifest. These are: de-alignment/re-alignment (e.g. shift from conventional coal to coal technologies with carbon dioxide capture and storage) and re-configuration (e.g. integrating renewables within buildings and the possible emergence of the 'hydrogen economy'). We conclude with a discussion of the opportunities for policy learning and experimentation consistent with transitions theory to facilitate the deployment of more sustainable energy systems

  1. Conceptual design of passive containment cooling system with air holdup tanks of improved APR+

    Jeon, Byong Guk; Cheon No, Hee

    2014-01-01

    In Korea, after the successful validation of passive auxiliary feedwater system (PAFS), a passive containment cooling system (PCCS) gets attention for future development. We suggested PCCS design based on APR+, an advanced PWR developed in Korea, and performed scoping analysis. On the extension of the simple scoping analysis, MARS simulation is performed to incorporate the behavior of water pool outside the containment as well as steam-air mixture inside the containment. Through the simulation we demonstrated the effectiveness of the air holdup tank (AHT). Also we investigated the effect of the models of heat transfer coefficients between steam-air mixture side and water side, and flow instability inside HX tubes. The presence of AHT enables us to reduce the number of required HX tubes more than half through an increase in the heat transfer coefficients due to the reduction of air fraction in the containment. Finally flow instability was observed and mitigated by putting orifice plates at the inlet of tubes, increasing height of return nozzle, and increasing a tube angle. (authors)

  2. Conceptual design of divertor cassette handling by remote handling system for JT-60SA

    Hayashi, Takao; Sakurai, Shinji; Masaki, Kei; Tamai, Hiroshi; Yoshida, Kiyoshi; Matsukawa, Makoto

    2007-01-01

    The JT-60SA aims to contribute and supplement ITER toward DEMO reactor based on tokamak concept. One of the features of JT-60SA is its high power long pulse heating, causing the large annual neutron fluence. Because the expected dose rate at the vacuum vessel (VV) may exceed 1 mSv/hr after 10 years operation and three month cooling, the human access inside the VV is prohibited. Therefore a remote handling (RH) system is necessary for the maintenance and repair of in-vessel components. This paper described the RH system of JT-60SA, especially the expansion of the RH rail and exchange of the divertor modules. The RH rail is divided into nine and three-point mounting. The nine sections can cover 225 degrees in toroidal direction. A divertor module, which is 10 degrees wide in toroidal direction and weighs 500kg itself due to the limitations of port width and handling weight, can be exchanged by heavy weight manipulator (HWM). The HWM brings the divertor module to the front of the other RH port, which is used for supporting the rail and/or carrying in and out equipments. Then another RH device receives and brings out the module by a pallet installed from outside the VV. (author)

  3. Conceptual design of divertor cassette handling by remote handling system of JT-60SA

    Hayashi, Takao; Sakurai, Shinji; Masaki, Kei; Tamai, Hiroshi; Yoshida, Kiyoshi; Matsukawa, Makoto

    2008-01-01

    The JT-60SA aims to contribute and supplement ITER toward demonstration fusion reactor based on tokamak concept. One of the features of JT-60SA is its high power long pulse heating, causing the large annual neutron fluence. Because the expected dose rate at the vacuum vessel (VV) may exceed 1 mSv/hr after 10 years operation and three month cooling, the human access inside the VV is restricted. Therefore a remote handling (RH) system is necessary for the maintenance and repair of in-vessel components. This paper described the RH system of JT-60SA, especially the expansion of the RH rail and exchange of the divertor cassettes. The RH rail is divided into nine and three-point mounting. The nine sections can cover 225 degrees in toroidal direction. A divertor cassette, which is 10 degrees wide in toroidal direction and weighs 500 kg itself due to the limitations of port width and handling weight, can be exchanged by heavy weight manipulator (HWM). The HWM brings the divertor cassette to the front of the other RH port, which is used for supporting the rail and/or carrying in and out equipments. Then another RH device receives and brings out the cassette by a pallet installed from outside the VV. (author)

  4. The Conceptual Design of a Mechatronic System to Handle Bedridden Elderly Individuals.

    Bruno, Silva; José, Machado; Filomena, Soares; Vítor, Carvalho; Demétrio, Matos; Karolina, Bezerra

    2016-05-19

    The ever-growing percentage of elderly people in developed countries have made Ambient Assisted Living (AAL) solutions an important subject to be explored and developed. The increase in geriatric care requests are overburdening specialized institutions that cannot cope with the demand for support. Patients are forced to have to remain at their homes encumbering the spouse or close family members with the caregiver role. This caregiver is not always physically and technically apt to assist the bedridden person with his/her meals and hygiene/bath routine. Consequently, a solution to assist caregivers in these tasks is of the utmost importance. This paper presents an approach for supporting caregivers when moving and repositioning Bedridden Elderly Peoples (BEPs) in home settings by means of a mechatronic system inspired by industrial conveyers. The proposed solution is able to insert itself underneath the patient, due to its low-profile structural properties, and retrieve and reallocate him/her. Ideally, the proposed mechatronic system aims to promote autonomy by reducing handling complexity, alter the role of the caregiver from physically handler of the BEP to an operator/supervisor role, and lessen the amount of effort expended by caregivers and BEPs alike.

  5. The Conceptual Design of a Mechatronic System to Handle Bedridden Elderly Individuals

    Silva Bruno

    2016-05-01

    Full Text Available The ever-growing percentage of elderly people in developed countries have made Ambient Assisted Living (AAL solutions an important subject to be explored and developed. The increase in geriatric care requests are overburdening specialized institutions that cannot cope with the demand for support. Patients are forced to have to remain at their homes encumbering the spouse or close family members with the caregiver role. This caregiver is not always physically and technically apt to assist the bedridden person with his/her meals and hygiene/bath routine. Consequently, a solution to assist caregivers in these tasks is of the utmost importance. This paper presents an approach for supporting caregivers when moving and repositioning Bedridden Elderly Peoples (BEPs in home settings by means of a mechatronic system inspired by industrial conveyers. The proposed solution is able to insert itself underneath the patient, due to its low-profile structural properties, and retrieve and reallocate him/her. Ideally, the proposed mechatronic system aims to promote autonomy by reducing handling complexity, alter the role of the caregiver from physically handler of the BEP to an operator/supervisor role, and lessen the amount of effort expended by caregivers and BEPs alike.

  6. The Conceptual Design of a Mechatronic System to Handle Bedridden Elderly Individuals

    Bruno, Silva; José, Machado; Filomena, Soares; Vítor, Carvalho; Demétrio, Matos; Karolina, Bezerra

    2016-01-01

    The ever-growing percentage of elderly people in developed countries have made Ambient Assisted Living (AAL) solutions an important subject to be explored and developed. The increase in geriatric care requests are overburdening specialized institutions that cannot cope with the demand for support. Patients are forced to have to remain at their homes encumbering the spouse or close family members with the caregiver role. This caregiver is not always physically and technically apt to assist the bedridden person with his/her meals and hygiene/bath routine. Consequently, a solution to assist caregivers in these tasks is of the utmost importance. This paper presents an approach for supporting caregivers when moving and repositioning Bedridden Elderly Peoples (BEPs) in home settings by means of a mechatronic system inspired by industrial conveyers. The proposed solution is able to insert itself underneath the patient, due to its low-profile structural properties, and retrieve and reallocate him/her. Ideally, the proposed mechatronic system aims to promote autonomy by reducing handling complexity, alter the role of the caregiver from physically handler of the BEP to an operator/supervisor role, and lessen the amount of effort expended by caregivers and BEPs alike. PMID:27213383

  7. Conceptual design of the special nuclear material nondestructive assay and accountability system for the HTGR fuel refabrication pilot plant

    Jenkins, J.D.; McNeany, S.R.; Rushton, J.E.

    1975-07-01

    The conceptual design of the fissile material assay and accountability system for the HTGR refabrication pilot plant has been established. The primary feature affecting the design is the high, time varying, gamma activity of the process material due to the unavoidable presence of uranium-232. This imposes stringent requirements for remote operation and remote maintainability of system components. At the same time, the remote operation lends itself to implementation of an automated data collection and processing system for real-time accountability. The high time-varying gamma activity of the material also precludes application of a number of techniques presently employed for light-water reactor fuel assay. The techniques selected for application in the refabrication facility are (1) active thermal neutron interrogation with fast-fission or delayed-neutron counting for fuel-rod and small-sample assay, (2) calorimetry for high-level waste assay, and (3) passive gamma scanning for low-level waste assay, and rapid on-line relative rod-loading measurements. The principal nondestructive assay subsystems are identified as (1) on-line devices for 100 percent product fuel rod assay and quality control, (2) a multipurpose device in the sample inspection laboratory for small- sample assay and secondary standards calibration, and (3) equipment for assay of high- and low-uranium content scrap and waste materials. A data processing system, which coordinates data from these subsystems with information from other process control sensors, is included to provide real-time material balance information. (U.S.)

  8. Conceptual design of an integrated information system for safety related analysis of nuclear power plants (IRIS Phase 1)

    Hofer, K.; Zehnder, P.; Galperin, A.

    1994-01-01

    This report deals with a conceptual design of an integrated information management system, called PSI-IRIS, as needed to assist the analysts for reactor safety related investigations on Swiss nuclear power plants within the project STARS. Performing complicated engineering analyses of an NPP requires storage and manipulation of a large amount of information, both data and knowledge. This information is characterized by its multi-disciplinary nature, complexity, and diversity. The problems caused by inefficient and lengthy manual operations involving the data flow management within the framework of the safety related analysis of an NPP, can be solved by applying computer aided engineering (CAE) principles. These principles are the basis for the design of the integrated information management system PSI-IRIS presented in this report. The basic idea is to create a computerized environment, which includes both database and functional capabilities. The database of the PSI-IRIS consists of two parts, an NPP generic database (GDB) and a collection of analysis results (CASE L IB). The GDB includes all technical plant data and information needed to generate input decks for all computer codes utilized within the STARS project. The CASE L IB storage contains the accumulated knowledge, input decks, and result files of the NPP transient analyses. Considerations and analysis of the data types and the required data manipulation capabilities as well as operational requirements resulted in the choice of an object-oriented database management system (OODBMS) as a development platform for solving the software engineering problems. Several advantages of OODBMS's over conventional relational database management systems were found of crucial importance, especially providing the necessary flexibility for different data types and the potential for extensibility. (author) 15 figs., tabs., 20 refs

  9. Assessment of the performance of a conceptual acoustic surveillance system for anomalous events in LMFBRs

    Doolittle, R.D.; Carey, W.M.

    1977-01-01

    A method is developed for calculating the detectability of anomalous acoustic events. The example used is the sodium vapor bubble collapse in the subcooled regions of a Liquid Metal Fast Breeder Reactor (LMFBR). This method provides a range of estimates for detection and false alarm probabilities in acoustic surveillance systems for sodium boiling and voiding detection, as well as any other impulsive events such as loose-parts monitoring. The signal excess at the receiver array from an impulsive source is computed by an extension of methods introduced by W. Carey. Assuming an exponential pulse form for the signal (or its envelope) the equivalent source level is determined from the energy flux spectral density for inclusion in the sonar equation. The signal excess (SE) is then given by the source level (SL) minus the noise level (NL) minus the transmission loss (TL) minus the detection threshold (DT) plus the receiving array gain

  10. Conceptual study of high power proton linac for accelerator driven subcritical nuclear power system

    Yu Qingchang; Ouyang Huafu; Xu Taoguang

    2002-01-01

    As a prior option of the next generation of energy source, the accelerator driven subcritical nuclear power system (ADS) can use efficiently the uranium and thorium resource, transmute the high-level long-lived radioactive wastes and raise nuclear safety. The ADS accelerator should provide the proton beam with tens megawatts. The superconducting linac is a good selection of ADS accelerator because of its high efficiency and low beam loss rate. The ADS accelerator presented by the authors consists of a 5 MeV radio-frequency quadrupole, a 100 MeV independently phased superconducting cavity linac and a 1 GeV elliptical superconducting cavity linac. The accelerating structures and main parameters are determined and the research and development plan is considered

  11. Conceptual design of the cryogenic system for the helical-type fusion power plant FFHR

    Yamada, S.; Sagara, A.; Imagawa, S.; Mito, T.; Motojima, O.

    2007-01-01

    The force-free helical-type fusion reactor, FFHR, is proposed on the basis of the engineering achievements and confinement properties of the experimental fusion device of LHD. The outputs of the thermal power and electric power are optimized to 3 and 1 GW, respectively. Total weight of the superconducting (SC) coils and their supporting structures of the FFHR are estimated to be 18,000 t. An equivalent refrigeration capacity of 98 kW is necessary for coping with different plant loads. Mass-flow rate of the main circulation compressors is 9.5 kg/s and their power consumption is 29 MW. The FFHR is used for the co-generation system of electricity and hydrogen. The pressurized hydrogen of 100 t per day can be produced, when the stem electrolyzer of 150 MW class is applied. Electric power consumption of the hydrogen liquefaction with 100 t per day is estimated to be 26 MW

  12. The Conceptual Design of an Integrated Nuclearhydrogen Production Plant Using the Sulfur Cycle Water Decomposition System

    Farbman, G. H.

    1976-01-01

    A hydrogen production plant was designed based on a hybrid electrolytic-thermochemical process for decomposing water. The sulfur cycle water decomposition system is driven by a very high temperature nuclear reactor that provides 1,283 K helium working gas. The plant is sized to approximately ten million standard cubic meters per day of electrolytically pure hydrogen and has an overall thermal efficiently of 45.2 percent. The economics of the plant were evaluated using ground rules which include a 1974 cost basis without escalation, financing structure and other economic factors. Taking into account capital, operation, maintenance and nuclear fuel cycle costs, the cost of product hydrogen was calculated at $5.96/std cu m for utility financing. These values are significantly lower than hydrogen costs from conventional water electrolysis plants and competitive with hydrogen from coal gasification plants.

  13. Conceptual study of high power proton linac for accelerator driven subcritical nuclear power system

    Yu Qi; Ouyang Hua Fu; Xu Tao Guang

    2001-01-01

    As a prior option of the next generation of energy source, the accelerator driven subcritical nuclear power system (ADS) can use efficiently the uranium and thorium resource, transmute the high-level long-lived radioactive wastes and raise nuclear safety. The ADS accelerator should provide the proton beam with tens megawatts. The superconducting linac is a good selection of ADS accelerator because of its high efficiency and low beam loss rate. The ADS accelerator presented by the consists of a 5 MeV radio-frequency quadrupole, a 100 MeV independently phased superconducting cavity linac and a 1 GeV elliptical superconducting cavity linac. The accelerating structures and main parameters are determined and the research and development plan is considered

  14. Conceptual study of the future nuclear fuel cycle system for the extended LWR age

    Fujine, Sachio; Takano, Hideki; Sato, Osamu; Tone, Tatsuzo; Yamada, Takashi; Kurosawa, Katsutoshi.

    1993-08-01

    A large scale integrated fuel cycle facility (IFCF) is assumed for the future nuclear fuel cycle in the extended LWR age. Spent MOX fuels are reprocessed mixed with UOX in a centralized reprocessing plant. The reprocessing plant separates long-lived nuclides as well as Pu. Nitric acid solutions of those products are fed directly to MOX fabrication process which is incorporated with reprocessing. MOX pellets are made by sphere-cal process. Two process concepts are made as advanced reprocessing incorporated with partitioning (ARP) which has the function of long-lived nuclides recovery. One is a simplified Purex combined with partitioning. Extractable long-lived nuclides, 237 Np and 99 Tc, are assumed to be recovered in main flow stream of the improved Purex process. The other process concept is made aiming at recovering all TRU nuclides in reprocessing to meet with TRU recycle requirement in the long future. A concept of the future fuel cycle system is made by combining integrated fuel cycle facility and very high burnup LWRs (VHBR). The reactor concept of VHBRs has been proposed to improve Pu recycle economy in the future. Highly enriched MOX fuel are loaded in the full core of reactor in order to increase reactivity for the burnup. Fuel cycle indices such as Pu isotopic composition change, spent fuel integration, nuclide transmutation effect are estimated by simulating the Pu recycling in the system of VHBR and ARP. It is concluded that Pu enrichment of MOX fuel can be kept less than 20 % through multi-recycle. Reprocessing MOX fuels with UOX shows a favorable effect for keeping Pu reactivity high enough for VHBR. Integration of spent MOX fuel can be reduced by Pu recycle. Transmutation of Np is feasible by containing Np into MOX fuel. (author)

  15. Conceptual study

    Harty, H.

    1978-09-01

    This appendix is a compendium of topical reports prepared for the Hanford Nuclear Energy Center: Status Report: Conceptual Fuel Cycle Studies for the Hanford Nuclear Energy Center; Selection of Heat Disposal Methods for a Hanford Nuclear Energy Center; Station Service Power Supply for a Hanford Nuclear Energy Center (HNEC); Impact of a Hanford Nuclear Energy Center on Ground Level Fog and Humidity; A Review of Potential Technology for the Seismic Characterization of Nuclear Energy Centers; Reliability of Generation at a Hanford Nuclear Energy Center (HNEC); Meteorological Evaluation of Multiple Reactor Contamination Probabilities for a Hanford Nuclear Energy Center; Electric Power Transmission for a Hanford Nuclear Energy Center (HNEC); The Impact of a Hanford Nuclear Energy Center on Cloudiness and Insolation; and A Licensing Review for an HNEC.

  16. Conceptual study

    Harty, H.

    1978-09-01

    This appendix is a compendium of topical reports prepared for the Hanford Nuclear Energy Center: Status Report: Conceptual Fuel Cycle Studies for the Hanford Nuclear Energy Center; Selection of Heat Disposal Methods for a Hanford Nuclear Energy Center; Station Service Power Supply for a Hanford Nuclear Energy Center (HNEC); Impact of a Hanford Nuclear Energy Center on Ground Level Fog and Humidity; A Review of Potential Technology for the Seismic Characterization of Nuclear Energy Centers; Reliability of Generation at a Hanford Nuclear Energy Center (HNEC); Meteorological Evaluation of Multiple Reactor Contamination Probabilities for a Hanford Nuclear Energy Center; Electric Power Transmission for a Hanford Nuclear Energy Center (HNEC); The Impact of a Hanford Nuclear Energy Center on Cloudiness and Insolation; and A Licensing Review for an HNEC

  17. Conceptualizing the dynamics of workplace stress: a systems-based study of nursing aides.

    Jetha, Arif; Kernan, Laura; Kurowski, Alicia

    2017-01-05

    Workplace stress is a complex phenomenon that may often be dynamic and evolving over time. Traditional linear modeling does not allow representation of recursive feedback loops among the implicated factors. The objective of this study was to develop a multidimensional system dynamics model (SDM) of workplace stress among nursing aides and conduct simulations to illustrate how changes in psychosocial perceptions and workplace factors might influence workplace stress over time. Eight key informants with prior experience in a large study of US nursing home workers participated in model building. Participants brainstormed the range of components related to workplace stress. Components were grouped together based on common themes and translated into feedback loops. The SDM was parameterized through key informant insight on the shape and magnitude of the relationship between model components. Model construction was also supported utilizing survey data collected as part of the larger study. All data was entered into the software program, Vensim. Simulations were conducted to examine how adaptations to model components would influence workplace stress. The SDM included perceptions of organizational conditions (e.g., job demands and job control), workplace social support (i.e., managerial and coworker social support), workplace safety, and demands outside of work (i.e. work-family conflict). Each component was part of a reinforcing feedback loop. Simulations exhibited that scenarios with increasing job control and decreasing job demands led to a decline in workplace stress. Within the context of the system, the effects of workplace social support, workplace safety, and work-family conflict were relatively minor. SDM methodology offers a unique perspective for researchers and practitioners to view workplace stress as a dynamic process. The portrayal of multiple recursive feedback loops can guide the development of policies and programs within complex organizational contexts

  18. What should an ideal spinal injury classification system consist of? A methodological review and conceptual proposal for future classifications.

    Middendorp, J.J. van; Audige, L.; Hanson, B.; Chapman, J.R.; Hosman, A.J.F.

    2010-01-01

    Since Bohler published the first categorization of spinal injuries based on plain radiographic examinations in 1929, numerous classifications have been proposed. Despite all these efforts, however, only a few have been tested for reliability and validity. This methodological, conceptual review

  19. Design study on advanced nuclear fuel recycle system. Conceptual design study of recycle system using molten salt

    Kasai, Y.; Kakehi, I.; Moro, T.; Higashi, T.; Tobe, K.; Kawamura, F.; Yonezawa, S.; Yoshiuji, T.

    1998-10-01

    Advanced recycle system engineering group of OEC (Oarai Engineering Center) has being carried out a design study of the advanced nuclear fuel recycle system using molten salt (electro-metallurgical process). This system is aiming for improvements of fuel cycle economy and reduction of environmental burden (MA recycles, Minimum of radioactive waste disposal), and also improvement of safety and nuclear non-proliferation. This report describes results of the design study that has been continued since December 1996. (1) A design concept of the advanced nuclear fuel recycle system, that is a module type recycles system of pyrochemical reprocessing and fuel re-fabrication was studied. The module system has advantage in balance of Pu recycle where modules are constructed in coincidence with the construction plan of nuclear power plants, and also has flexibility for technology progress. A demonstration system, minimum size of the above module, was studies. This system has capacity of 10 tHM/y and is able to demonstrate recycle technology of MOX fuel, metal fuel and nitride fuel. (2) Each process of the system, which are pyrochemical electrorefining system, cathode processor, de-cladding system, waste disposal system, etc., were studied. In this study, capacity of an electrorefiner was discussed, and vitrification experiment of molten salt using lead-boric acid glass was conducted. (3) A hot cell system and material handling system of the demonstration system was studied. A robot driven by linear motor was studied for the handling system, and an arrangement plan of the cell system was made. Criticality analysis in the cell system and investigation of material accountancy system of the recycle plant were also made. This design study will be continued in coincidence with design study of reactor and fuel, aiming to establish the concept of FBR recycle system. (author)

  20. Conceptual design of a cold methane moderator system for the European Spallation Source (ESS)

    Barnert-Wiemer, H.

    2002-02-01

    As part of the work for the target station of the planned European spallation source (ESS) the Central Department of Technology at the Forschungszentrum Juelich GmbH is also concerned with the moderators, particular attention being given to the development of cold methane moderators. This report discusses the technical feasibility of solid methane moderators. Methods to tailor the neutron output by adding absorption materials (decouplers or poisons) are not considered here, neither are composite moderators. Based on the given target-moderator-reflector assembly of the ESS project a concept for the ESS cold methane moderators has been developed and is being examined at the Forschungszentrum Juelich. According to this moderator concept the moderator is a fixed bed of small spheres, which makes moderator container filling homogeneous and reproducible. Since spheres form a defined packed bed, cooling of the moderator bed by H 2 is reliable. The process of filling the moderator container and of removing the pellets is batchwise to ensure complete removal of the pellets, so that no spent methane pellets accumulate in the system. For removal of the moderator spheres the fixed bed in the moderator container is fluidized with subsequent hydraulic transport of the pellets. The spent methane pellets are separated from the transport fluid and the methane is released over the stack or purified and reused. Depending on the kind and amount of the radioactive isotopes present these may have to be separated and stored. (orig.)